WorldWideScience

Sample records for self-force analysis requires

  1. Self-force as a cosmic censor in the Kerr overspinning problem

    Science.gov (United States)

    Colleoni, Marta; Barack, Leor; Shah, Abhay G.; van de Meent, Maarten

    2015-10-01

    It is known that a near-extremal Kerr black hole can be spun up beyond its extremal limit by capturing a test particle. Here we show that overspinning is always averted once backreaction from the particle's own gravity is properly taken into account. We focus on nonspinning, uncharged, massive particles thrown in along the equatorial plane and work in the first-order self-force approximation (i.e., we include all relevant corrections to the particle's acceleration through linear order in the ratio, assumed small, between the particle's energy and the black hole's mass). Our calculation is a numerical implementation of a recent analysis by two of us [Phys. Rev. D 91, 104024 (2015)], in which a necessary and sufficient "censorship" condition was formulated for the capture scenario, involving certain self-force quantities calculated on the one-parameter family of unstable circular geodesics in the extremal limit. The self-force information accounts both for radiative losses and for the finite-mass correction to the critical value of the impact parameter. Here we obtain the required self-force data and present strong evidence to suggest that captured particles never drive the black hole beyond its extremal limit. We show, however, that, within our first-order self-force approximation, it is possible to reach the extremal limit with a suitable choice of initial orbital parameters. To rule out such a possibility would require (currently unavailable) information about higher-order self-force corrections.

  2. Self-consistent gravitational self-force

    International Nuclear Information System (INIS)

    Pound, Adam

    2010-01-01

    I review the problem of motion for small bodies in general relativity, with an emphasis on developing a self-consistent treatment of the gravitational self-force. An analysis of the various derivations extant in the literature leads me to formulate an asymptotic expansion in which the metric is expanded while a representative worldline is held fixed. I discuss the utility of this expansion for both exact point particles and asymptotically small bodies, contrasting it with a regular expansion in which both the metric and the worldline are expanded. Based on these preliminary analyses, I present a general method of deriving self-consistent equations of motion for arbitrarily structured (sufficiently compact) small bodies. My method utilizes two expansions: an inner expansion that keeps the size of the body fixed, and an outer expansion that lets the body shrink while holding its worldline fixed. By imposing the Lorenz gauge, I express the global solution to the Einstein equation in the outer expansion in terms of an integral over a worldtube of small radius surrounding the body. Appropriate boundary data on the tube are determined from a local-in-space expansion in a buffer region where both the inner and outer expansions are valid. This buffer-region expansion also results in an expression for the self-force in terms of irreducible pieces of the metric perturbation on the worldline. Based on the global solution, these pieces of the perturbation can be written in terms of a tail integral over the body's past history. This approach can be applied at any order to obtain a self-consistent approximation that is valid on long time scales, both near and far from the small body. I conclude by discussing possible extensions of my method and comparing it to alternative approaches.

  3. Singular perturbation techniques in the gravitational self-force problem

    International Nuclear Information System (INIS)

    Pound, Adam

    2010-01-01

    Much of the progress in the gravitational self-force problem has involved the use of singular perturbation techniques. Yet the formalism underlying these techniques is not widely known. I remedy this situation by explicating the foundations and geometrical structure of singular perturbation theory in general relativity. Within that context, I sketch precise formulations of the methods used in the self-force problem: dual expansions (including matched asymptotic expansions), for which I identify precise matching conditions, one of which is a weak condition arising only when multiple coordinate systems are used; multiscale expansions, for which I provide a covariant formulation; and a self-consistent expansion with a fixed worldline, for which I provide a precise statement of the exact problem and its approximation. I then present a detailed analysis of matched asymptotic expansions as they have been utilized in calculating the self-force. Typically, the method has relied on a weak matching condition, which I show cannot determine a unique equation of motion. I formulate a refined condition that is sufficient to determine such an equation. However, I conclude that the method yields significantly weaker results than do alternative methods.

  4. A rigorous derivation of gravitational self-force

    International Nuclear Information System (INIS)

    Gralla, Samuel E; Wald, Robert M

    2008-01-01

    There is general agreement that the MiSaTaQuWa equations should describe the motion of a 'small body' in general relativity, taking into account the leading order self-force effects. However, previous derivations of these equations have made a number of ad hoc assumptions and/or contain a number of unsatisfactory features. For example, all previous derivations have invoked, without proper justification, the step of 'Lorenz gauge relaxation', wherein the linearized Einstein equation is written in the form appropriate to the Lorenz gauge, but the Lorenz gauge condition is then not imposed-thereby making the resulting equations for the metric perturbation inequivalent to the linearized Einstein equations. (Such a 'relaxation' of the linearized Einstein equations is essential in order to avoid the conclusion that 'point particles' move on geodesics.) In this paper, we analyze the issue of 'particle motion' in general relativity in a systematic and rigorous way by considering a one-parameter family of metrics, g ab (λ), corresponding to having a body (or black hole) that is 'scaled down' to zero size and mass in an appropriate manner. We prove that the limiting worldline of such a one-parameter family must be a geodesic of the background metric, g ab (λ = 0). Gravitational self-force-as well as the force due to coupling of the spin of the body to curvature-then arises as a first-order perturbative correction in λ to this worldline. No assumptions are made in our analysis apart from the smoothness and limit properties of the one-parameter family of metrics, g ab (λ). Our approach should provide a framework for systematically calculating higher order corrections to gravitational self-force, including higher multipole effects, although we do not attempt to go beyond first-order calculations here. The status of the MiSaTaQuWa equations is explained

  5. Self-force as probe of internal structure

    International Nuclear Information System (INIS)

    Isoyama, Soichiro; Poisson, Eric

    2012-01-01

    The self-force acting on a (scalar or electric) charge held in place outside a massive body contains information about the body's composition, and can therefore be used as a probe of internal structure. We explore this theme by computing the (scalar or electromagnetic) self-force when the body is a spherical ball of perfect fluid in hydrostatic equilibrium, under the assumption that its rest-mass density and pressure are related by a polytropic equation of state. The body is strongly self-gravitating, and all computations are performed in exact general relativity. The dependence on internal structure is best revealed by expanding the self-force in powers of r -1 0 , with r 0 denoting the radial position of the charge outside the body. To the leading order, the self-force scales as r -3 0 and depends only on the square of the charge and the body's mass; the leading self-force is universal. The dependence on internal structure is seen at the next order, r -5 0 , through a structure factor that depends on the equation of state. We compute this structure factor for relativistic polytropes, and show that for a fixed mass, it increases linearly with the body's radius in the case of the scalar self-force, and quadratically with the body's radius in the case of the electromagnetic self-force. In both cases we find that for a fixed mass and radius, the self-force is smaller if the body is more centrally dense, and larger if the mass density is more uniformly distributed. (paper)

  6. A matched expansion approach to practical self-force calculations

    International Nuclear Information System (INIS)

    Anderson, Warren G; Wiseman, Alan G

    2005-01-01

    We discuss a practical method of computing the self-force on a particle moving through a curved spacetime. This method involves two expansions to calculate the self-force, one arising from the particle's immediate past and the other from the more distant past. The expansion in the immediate past is a covariant Taylor series and can be carried out for all geometries. The more distant expansion is a mode sum, and may be carried out in those cases where the wave equation for the field mediating the self-force admits a mode expansion of the solution. In particular, this method can be used to calculate the gravitational self-force for a particle of mass μ orbiting a black hole of mass M to order μ 2 , provided μ/M << 1. We discuss how to use these two expansions to construct a full self-force, and in particular investigate criteria for matching the two expansions. As with all methods of computing self-forces for particles moving in black hole spacetimes, one encounters considerable technical difficulty in applying this method; nevertheless, it appears that the convergence of each series is good enough that a practical implementation may be plausible

  7. Nonlinear gravitational self-force: Field outside a small body

    Science.gov (United States)

    Pound, Adam

    2012-10-01

    A small extended body moving through an external spacetime gαβ creates a metric perturbation hαβ, which forces the body away from geodesic motion in gαβ. The foundations of this effect, called the gravitational self-force, are now well established, but concrete results have mostly been limited to linear order. Accurately modeling the dynamics of compact binaries requires proceeding to nonlinear orders. To that end, I show how to obtain the metric perturbation outside the body at all orders in a class of generalized wave gauges. In a small buffer region surrounding the body, the form of the perturbation can be found analytically as an expansion for small distances r from a representative worldline. Given only a specification of the body’s multipole moments, the field obtained in the buffer region suffices to find the metric everywhere outside the body via a numerical puncture scheme. Following this procedure at first and second order, I calculate the field in the buffer region around an arbitrarily structured compact body at sufficiently high order in r to numerically implement a second-order puncture scheme, including effects of the body’s spin. I also define nth-order (local) generalizations of the Detweiler-Whiting singular and regular fields and show that in a certain sense, the body can be viewed as a skeleton of multipole moments.

  8. PIT Coating Requirements Analysis

    International Nuclear Information System (INIS)

    MINTEER, D.J.

    2000-01-01

    This study identifies the applicable requirements for procurement and installation of a coating intended for tank farm valve and pump pit interior surfaces. These requirements are intended to be incorporated into project specification documents and design media. This study also evaluates previously recommended coatings and identifies requirement-compliant coating products

  9. PIT Coating Requirements Analysis

    Energy Technology Data Exchange (ETDEWEB)

    MINTEER, D.J.

    2000-10-20

    This study identifies the applicable requirements for procurement and installation of a coating intended for tank farm valve and pump pit interior surfaces. These requirements are intended to be incorporated into project specification documents and design media. This study also evaluates previously recommended coatings and identifies requirement-compliant coating products.

  10. Effective source approach to self-force calculations

    International Nuclear Information System (INIS)

    Vega, Ian; Wardell, Barry; Diener, Peter

    2011-01-01

    Numerical evaluation of the self-force on a point particle is made difficult by the use of delta functions as sources. Recent methods for self-force calculations avoid delta functions altogether, using instead a finite and extended 'effective source' for a point particle. We provide a review of the general principles underlying this strategy, using the specific example of a scalar point charge moving in a black hole spacetime. We also report on two new developments: (i) the construction and evaluation of an effective source for a scalar charge moving along a generic orbit of an arbitrary spacetime, and (ii) the successful implementation of hyperboloidal slicing that significantly improves on previous treatments of boundary conditions used for effective-source-based self-force calculations. Finally, we identify some of the key issues related to the effective source approach that will need to be addressed by future work.

  11. Quasilocal contribution to the scalar self-force: Geodesic motion

    International Nuclear Information System (INIS)

    Ottewill, Adrian C.; Wardell, Barry

    2008-01-01

    We consider a scalar charge travelling in a curved background space-time. We calculate the quasilocal contribution to the scalar self-force experienced by such a particle following a geodesic in a general space-time. We also show that if we assume a massless field and a vacuum background space-time, the expression for the self-force simplifies significantly. We consider some specific cases whose gravitational analogs are of immediate physical interest for the calculation of radiation-reaction corrected orbits of binary black hole systems. These systems are expected to be detectable by the LISA space based gravitational wave observatory. We also investigate how alternate techniques may be employed in some specific cases and use these as a check on our own results

  12. Self-force on dislocation segments in anisotropic crystals

    International Nuclear Information System (INIS)

    Fitzgerald, S P; Aubry, S

    2010-01-01

    A dislocation segment in a crystal experiences a 'self-force', by virtue of the orientation dependence of its elastic energy. If the crystal is elastically isotropic, this force is manifested as a couple acting to rotate the segment toward the lower energy of the pure screw orientation (i.e. acting to align the dislocation line with its Burgers vector). If the crystal is anisotropic, there are additional contributions to the couple, arising from the more complex energy landscape of the lattice itself. These effects can strongly influence the dynamic evolution of dislocation networks, and via their governing role in dislocation multiplication phenomena, control plastic flow in metals. In this paper we develop a model for dislocation self-forces in a general anisotropic crystal, and briefly consider the technologically important example of α-iron, which becomes increasingly anisotropic as the temperature approaches that of the α-γ phase transition at 912 0 C.

  13. Gravitational Self-Force: Orbital Mechanics Beyond Geodesic Motion

    Science.gov (United States)

    Barack, Leor

    The question of motion in a gravitationally bound two-body system is a longstanding open problem of General Relativity. When the mass ratio eta; is small, the problem lends itself to a perturbative treatment, wherein corrections to the geodesic motion of the smaller object (due to radiation reaction, internal structure, etc.) are accounted for order by order in η, using the language of an effective gravitational self-force. The prospect for observing gravitational waves from compact objects inspiralling into massive black holes in the foreseeable future has in the past 15 years motivated a program to obtain a rigorous formulation of the self-force and compute it for astrophysically interesting systems. I will give a brief survey of this activity and its achievements so far, and will identify the challenges that lie ahead. As concrete examples, I will discuss recent calculations of certain conservative post-geodesic effects of the self-force, including the O(η ) correction to the precession rate of the periastron. I will highlight the way in which such calculations allow us to make a fruitful contact with other approaches to the two-body problem.

  14. Self-force on an electric dipole in the spacetime of a cosmic string

    Energy Technology Data Exchange (ETDEWEB)

    Muniz, C.R., E-mail: celiomuniz@yahoo.com [Grupo de Física Teórica (GFT), Universidade Estadual do Ceará, UECE-FECLI, Iguatu, Ceará (Brazil); Bezerra, V.B., E-mail: valdir@ufpb.br [Departamento de Física, Universidade Federal da Paraíba, Caixa Postal 5008, CEP 58051-970, João Pessoa, PB (Brazil)

    2014-01-15

    We calculate the electrostatic self-force on an electric dipole in the spacetime generated by a static, thin, infinite and straight cosmic string. The electric dipole is held fixed in different configurations, namely, parallel, perpendicular to the cosmic string and oriented along the azimuthal direction around this topological defect, which is stretched along the z axis. We show that the self-force is equivalent to an interaction of the electric dipole with an effective dipole moment which depends on the linear mass density of the cosmic string and on the configuration. The plots of the self-forces as functions of the parameter which determines the angular deficit of the cosmic string are shown for those different configurations. -- Highlights: •Review of regularized Green’s function applied to the problem. •Self-force on an electric dipole in the string spacetime for some orientations. •Representation via graphs of the self-forces versus angular parameter of the cosmic string. •Self-force induced by the string seen as an interaction between two dipoles. •Discussion about the superposition principle in this non-trivial background.

  15. A Requirements Analysis Model Based on QFD

    Institute of Scientific and Technical Information of China (English)

    TANG Zhi-wei; Nelson K.H.Tang

    2004-01-01

    The enterprise resource planning (ERP) system has emerged to offer an integrated IT solution and more and more enterprises are increasing by adopting this system and regarding it as an important innovation. However, there is already evidence of high failure risks in ERP project implementation, one major reason is poor analysis of the requirements for system implementation. In this paper, the importance of requirements analysis for ERP project implementation is highlighted, and a requirements analysis model by applying quality function deployment (QFD) is presented, which will support to conduct requirements analysis for ERP project.

  16. Self-force on an arbitrarily coupled scalar charge in cylindrical thin-shell spacetimes

    Energy Technology Data Exchange (ETDEWEB)

    Tomasini, C.; Rubin de Celis, E.; Simeone, C. [Universidad de Buenos Aires y IFIBA, CONICET, Ciudad Universitaria, Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Buenos Aires (Argentina)

    2018-02-15

    We consider the arbitrarily coupled field and self-force of a static massless scalar charge in cylindrical spacetimes with one or two asymptotic regions, with the only matter content concentrated in a thin-shell characterized by the trace of the extrinsic curvature jump κ. The self-force is studied numerically and analytically in terms of the curvature coupling ξ. We found the critical values ξ{sub c}{sup (n)} = n/(ρ(r{sub s})κ), with n element of N and ρ(r{sub s}) the metric's profile function at the position of the shell, for which the scalar field is divergent in the background configuration. The pathological behavior is removed by restricting the coupling to a domain of stability. The coupling has a significant influence over the self-force at the vicinities of the shell, and we identified ξ = 1/4 as the value for which the scalar force changes sign at a neighborhood of r{sub s}; if κ(1-4ξ) > 0 the shell acts repulsively as an effective potential barrier, while if κ(1-4ξ) < 0 it attracts the charge as a potential well. The sign of the asymptotic self-force only depends on whether there is an angle deficit or not on the external region where the charge is placed; conical asymptotics produce a leading attractive force, while Minkowski regions produce a repulsive asymptotic self-force. (orig.)

  17. Requirements Analysis in the Value Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Conner, Alison Marie

    2001-05-01

    The Value Methodology (VM) study brings together a multidisciplinary team of people who own the problem and have the expertise to identify and solve it. With the varied backgrounds and experiences the team brings to the study, come different perspectives on the problem and the requirements of the project. A requirements analysis step can be added to the Information and Function Analysis Phases of a VM study to validate whether the functions being performed are required, either regulatory or customer prescribed. This paper will provide insight to the level of rigor applied to a requirements analysis step and give some examples of tools and techniques utilized to ease the management of the requirements and functions those requirements support for highly complex problems.

  18. Requirements Elicitation Problems: A Literature Analysis

    Directory of Open Access Journals (Sweden)

    Bill Davey

    2015-06-01

    Full Text Available Requirements elicitation is the process through which analysts determine the software requirements of stakeholders. Requirements elicitation is seldom well done, and an inaccurate or incomplete understanding of user requirements has led to the downfall of many software projects. This paper proposes a classification of problem types that occur in requirements elicitation. The classification has been derived from a literature analysis. Papers reporting on techniques for improving requirements elicitation practice were examined for the problem the technique was designed to address. In each classification the most recent or prominent techniques for ameliorating the problems are presented. The classification allows the requirements engineer to be sensitive to problems as they arise and the educator to structure delivery of requirements elicitation training.

  19. Elementary Development of the Gravitational Self-Force

    Science.gov (United States)

    Detweiler, Steven

    The gravitational field of a particle of small mass m moving through curved spacetime, with metric g ab , is naturally and easily decomposed into two parts each of which satisfies the perturbed Einstein equations through O(m). One part is an inhomogeneous field h ab S which, near the particle, looks like the Coulomb m / r field with tidal distortion from the local Riemann tensor. This singular field is defined in a neighborhood of the small particle and does not depend upon boundary conditions or upon the behavior of the source in either the past or the future. The other part is a homogeneous field h ab R. In a perturbative analysis, the motion of the particle is then best described as being a geodesic in the metric g ab + h ab R. This geodesic motion includes all of the effects which might be called radiation reaction and conservative effects as well.

  20. Linking Safety Analysis to Safety Requirements

    DEFF Research Database (Denmark)

    Hansen, Kirsten Mark

    Software for safety critical systems must deal with the hazards identified by safety analysistechniques: Fault trees, event trees,and cause consequence diagrams can be interpreted as safety requirements and used in the design activity. We propose that the safety analysis and the system design use...

  1. Requirement analysis for autonomous systems and intelligent ...

    African Journals Online (AJOL)

    user

    Danish Power System and a requirement analysis for the use of intelligent agents and ..... tries to make an optimal islanding plan at this state and tries to blackstart. ... 4 Foundation for Physical Intelligent Agents (FIPA): http://www.fipa.org ...

  2. The self-force on a non-minimally coupled static scalar charge outside a Schwarzschild black hole

    International Nuclear Information System (INIS)

    Cho, Demian H J; Tsokaros, Antonios A; Wiseman, Alan G

    2007-01-01

    The finite part of the self-force on a static, non-minimally coupled scalar test charge outside a Schwarzschild black hole is zero. This result is determined from the work required to slowly raise or lower the charge through an infinitesimal distance. Unlike similar force calculations for minimally-coupled scalar charges or electric charges, we find that we must account for a flux of field energy that passes through the horizon and changes the mass and area of the black hole when the charge is displaced. This occurs even for an arbitrarily slow displacement of the non-minimally coupled scalar charge. For a positive coupling constant, the area of the hole increases when the charge is lowered and decreases when the charge is raised. The fact that the self-force vanishes for a static, non-minimally coupled scalar charge in Schwarzschild spacetime agrees with a simple prediction of the Quinn-Wald axioms. However, Zel'nikov and Frolov computed a non-vanishing self-force for a non-minimally coupled charge. Our method of calculation closely parallels the derivation of Zel'nikov and Frolov, and we show that their omission of this unusual flux is responsible for their (incorrect) result. When the flux is accounted for, the self-force vanishes. This correction eliminates a potential counter example to the Quinn-Wald axioms. The fact that the area of the black hole changes when the charge is displaced brings up two interesting questions that did not arise in similar calculations for static electric charges and minimally coupled scalar charges. (1) How can we reconcile a decrease in the area of the black hole horizon with the area theorem which concludes that δArea horizon ≥ 0? The key hypothesis of the area theorem is that the stress-energy tensor must satisfy a null-energy condition T αβ l α l β ≥ 0 for any null vector l α . We explicitly show that the stress-energy associated with a non-minimally coupled field does not satisfy this condition, and this violation of

  3. ANALYSIS OF THE NORMATIVE REQUIREMENTS FOR ENSURING

    Directory of Open Access Journals (Sweden)

    Eva VELIČKOVÁ

    2015-12-01

    Full Text Available During the process of electrostatic powder coating in coating booths, there is a probability of the risk of explosion. Compliance with the normative requirements referred to in the legislation in force minimize the hazards associated with the risk of explosion. This article focuses on the analysis of the current security level of coating booths in terms of the risk of explosion in relation to the lower explosive limit of the selected powder paints.

  4. Self-force calculations with matched expansions and quasinormal mode sums

    International Nuclear Information System (INIS)

    Casals, Marc; Dolan, Sam; Ottewill, Adrian C.; Wardell, Barry

    2009-01-01

    Accurate modeling of gravitational wave emission by extreme-mass ratio inspirals is essential for their detection by the LISA mission. A leading perturbative approach involves the calculation of the self-force acting upon the smaller orbital body. In this work, we present the first application of the Poisson-Wiseman-Anderson method of 'matched expansions' to compute the self-force acting on a point particle moving in a curved spacetime. The method employs two expansions for the Green function, which are, respectively, valid in the 'quasilocal' and 'distant past' regimes, and which may be matched together within the normal neighborhood. We perform our calculation in a static region of the spherically symmetric Nariai spacetime (dS 2 xS 2 ), in which scalar-field perturbations are governed by a radial equation with a Poeschl-Teller potential (frequently used as an approximation to the Schwarzschild radial potential) whose solutions are known in closed form. The key new ingredients in our study are (i) very high order quasilocal expansions and (ii) expansion of the distant past Green function in quasinormal modes. In combination, these tools enable a detailed study of the properties of the scalar-field Green function. We demonstrate that the Green function is singular whenever x and x ' are connected by a null geodesic, and apply asymptotic methods to determine the structure of the Green function near the null wave front. We show that the singular part of the Green function undergoes a transition each time the null wave front passes through a caustic point, following a repeating fourfold sequence δ(σ), 1/πσ, -δ(σ), -1/πσ, etc., where σ is Synge's world function. The matched-expansion method provides insight into the nonlocal properties of the self-force. We show that the self-force generated by the segment of the worldline lying outside the normal neighborhood is not negligible. We apply the matched-expansion method to compute the scalar self-force acting on

  5. Regularization of fields for self-force problems in curved spacetime: Foundations and a time-domain application

    International Nuclear Information System (INIS)

    Vega, Ian; Detweiler, Steven

    2008-01-01

    We propose an approach for the calculation of self-forces, energy fluxes and waveforms arising from moving point charges in curved spacetimes. As opposed to mode-sum schemes that regularize the self-force derived from the singular retarded field, this approach regularizes the retarded field itself. The singular part of the retarded field is first analytically identified and removed, yielding a finite, differentiable remainder from which the self-force is easily calculated. This regular remainder solves a wave equation which enjoys the benefit of having a nonsingular source. Solving this wave equation for the remainder completely avoids the calculation of the singular retarded field along with the attendant difficulties associated with numerically modeling a delta-function source. From this differentiable remainder one may compute the self-force, the energy flux, and also a waveform which reflects the effects of the self-force. As a test of principle, we implement this method using a 4th-order (1+1) code, and calculate the self-force for the simple case of a scalar charge moving in a circular orbit around a Schwarzschild black hole. We achieve agreement with frequency-domain results to ∼0.1% or better.

  6. Self-force correction to geodetic spin precession in Kerr spacetime

    Science.gov (United States)

    Akcay, Sarp

    2017-08-01

    We present an expression for the gravitational self-force correction to the geodetic spin precession of a spinning compact object with small, but non-negligible mass in a bound, equatorial orbit around a Kerr black hole. We consider only conservative backreaction effects due to the mass of the compact object (m1), thus neglecting the effects of its spin s1 on its motion; i.e., we impose s1≪G m12/c and m1≪m2, where m2 is the mass parameter of the background Kerr spacetime. We encapsulate the correction to the spin precession in ψ , the ratio of the accumulated spin-precession angle to the total azimuthal angle over one radial orbit in the equatorial plane. Our formulation considers the gauge-invariant O (m1) part of the correction to ψ , denoted by Δ ψ , and is a generalization of the results of Akcay et al. [Classical Quantum Gravity 34, 084001 (2017), 10.1088/1361-6382/aa61d6] to Kerr spacetime. Additionally, we compute the zero-eccentricity limit of Δ ψ and show that this quantity differs from the circular orbit Δ ψcirc by a gauge-invariant quantity containing the gravitational self-force correction to general relativistic periapsis advance in Kerr spacetime. Our result for Δ ψ is expressed in a manner that readily accommodates numerical/analytical self-force computations, e.g., in the radiation gauge, and paves the way for the computation of a new eccentric-orbit Kerr gauge invariant beyond the generalized redshift.

  7. Systematic analysis of aircraft separation requirements

    Science.gov (United States)

    Ennis, Rachelle Lea

    2005-12-01

    Minimum separation standards are necessary for safety in the air traffic control system. At the same time, minimum separation standards constrain the flow of air traffic and cause delays that translate to millions of dollars in fuel costs. Two necessary separation standards are defined. Then, practical methods for calculating the minimum required size of these separation standards are presented. First, the protected zone is considered. The protected zone represents a region around a given aircraft that no other aircraft should penetrate for the safety of both aircraft. It defines minimum separation requirements. Three major components of the protected zone and their interplays are identified: a vortex region, a safety buffer region, and a state-uncertainty region. A systematic procedure is devised for the analysis of the state-uncertainty region. In particular, models of trajectory controls are developed that can be used to represent different modes of pilot and/or autopilot controls, such as path feedback and non-path feedback. Composite protected zones under various conditions are estimated, and effective ways to reduce sizes of protected zones for advanced air traffic management are examined. In order to maintain minimum separation standards between two aircraft, proper avoidance maneuvers must be initiated before their relative separation reaches the minimum separation due to aircraft dynamics, controller and pilot response delays, etc. The concept of the required action threshold is presented. It is defined as the advanced time for which the conflict resolution process must begin in order to maintain minimum separation requirements. Five main segments in the process of conflict resolution are identified, discussed, and modeled: state information acquisition, comprehension and decision, communication, pilot response, and aircraft maneuver. Each of the five segments is modeled via a time constant. Time estimates for the first four segments are obtained from

  8. Security RequirementsAnalysis of the Issue

    Directory of Open Access Journals (Sweden)

    Jhon Vincent

    2013-12-01

    Full Text Available Needs about security are matters little taken into account when managing requirements engineering , and when considered in the life cycle of the system , they tend to become a general list of functions, as password of protection , firewalls , virus detection tools , and other similar. But in fact, they cannot be considered as requirements of security, because they are implementation mechanisms to try to meet unspecified requirements, as an authenticated access. As a result, the security requirements for the system are ignored, which are required to protect essential services and assets, besides, when are specified, is not considered the prospect of future attacks. This paper describes the need for a systematic approach to managing security requirements engineering, in order to help avoid the problem of generic lists and take into account the future perspective. Several related approaches are described and also are provided references additional material that can help requirements engineers to ensure that their products be taken into account, effectively , the security requirements.

  9. Nonfunctional requirements in systems analysis and design

    CERN Document Server

    Adams, Kevin MacG

    2015-01-01

    This book will help readers gain a solid understanding of non-functional requirements inherent in systems design endeavors. It contains essential information for those who design, use, and maintain complex engineered systems, including experienced designers, teachers of design, system stakeholders, and practicing engineers. Coverage approaches non-functional requirements in a novel way by presenting a framework of four systems concerns into which the 27 major non-functional requirements fall: sustainment, design, adaptation, and viability. Within this model, the text proceeds to define each non-functional requirement, to specify how each is treated as an element of the system design process, and to develop an associated metric for their evaluation. Systems are designed to meet specific functional needs. Because non-functional requirements are not directly related to tasks that satisfy these proposed needs, designers and stakeholders often fail to recognize the importance of such attributes as availability, su...

  10. Functional Foods Baseline and Requirements Analysis

    Science.gov (United States)

    Cooper, M. R.; Bermudez-Aguirre, L. D.; Douglas, G.

    2015-01-01

    Current spaceflight foods were evaluated to determine if their nutrient profile supports positioning as a functional food and if the stability of the bioactive compound within the food matrix over an extended shelf-life correlated with the expected storage duration during the mission. Specifically, the research aims were: Aim A. To determine the amount of each nutrient in representative spaceflight foods immediately after processing and at predetermined storage time to establish the current nutritional state. Aim B. To identify the requirements to develop foods that stabilize these nutrients such that required concentrations are maintained in the space food system throughout long duration missions (up to five years). Aim C. To coordinate collaborations with health and performance groups that may require functional foods as a countermeasure.

  11. Beyond the geodesic approximation: Conservative effects of the gravitational self-force in eccentric orbits around a Schwarzschild black hole

    International Nuclear Information System (INIS)

    Barack, Leor; Sago, Norichika

    2011-01-01

    We study conservative finite-mass corrections to the motion of a particle in a bound (eccentric) strong-field orbit around a Schwarzschild black hole. We assume the particle's mass μ is much smaller than the black hole mass M, and explore post-geodesic corrections of O(μ/M). Our analysis uses numerical data from a recently developed code that outputs the Lorenz-gauge gravitational self-force (GSF) acting on the particle along the eccentric geodesic. First, we calculate the O(μ/M) conservative correction to the periastron advance of the orbit, as a function of the (gauge-dependent) semilatus rectum and eccentricity. A gauge-invariant description of the GSF precession effect is made possible in the circular-orbit limit, where we express the correction to the periastron advance as a function of the invariant azimuthal frequency. We compare this relation with results from fully nonlinear numerical-relativistic simulations. In order to obtain a gauge-invariant measure of the GSF effect for fully eccentric orbits, we introduce a suitable generalization of Detweiler's circular-orbit ''redshift'' invariant. We compute the O(μ/M) conservative correction to this invariant, expressed as a function of the two invariant frequencies that parametrize the orbit. Our results are in good agreement with results from post-Newtonian calculations in the weak-field regime, as we shall report elsewhere. The results of our study can inform the development of analytical models for the dynamics of strongly gravitating binaries. They also provide an accurate benchmark for future numerical-relativistic simulations.

  12. Surveillance Analysis Computer System (SACS) software requirements specification (SRS)

    International Nuclear Information System (INIS)

    Glasscock, J.A.; Flanagan, M.J.

    1995-09-01

    This document is the primary document establishing requirements for the Surveillance Analysis Computer System (SACS) Database, an Impact Level 3Q system. The purpose is to provide the customer and the performing organization with the requirements for the SACS Project

  13. Spectrum analysis on quality requirements consideration in software design documents.

    Science.gov (United States)

    Kaiya, Haruhiko; Umemura, Masahiro; Ogata, Shinpei; Kaijiri, Kenji

    2013-12-01

    Software quality requirements defined in the requirements analysis stage should be implemented in the final products, such as source codes and system deployment. To guarantee this meta-requirement, quality requirements should be considered in the intermediate stages, such as the design stage or the architectural definition stage. We propose a novel method for checking whether quality requirements are considered in the design stage. In this method, a technique called "spectrum analysis for quality requirements" is applied not only to requirements specifications but also to design documents. The technique enables us to derive the spectrum of a document, and quality requirements considerations in the document are numerically represented in the spectrum. We can thus objectively identify whether the considerations of quality requirements in a requirements document are adapted to its design document. To validate the method, we applied it to commercial software systems with the help of a supporting tool, and we confirmed that the method worked well.

  14. Requirements-Driven Log Analysis Extended Abstract

    Science.gov (United States)

    Havelund, Klaus

    2012-01-01

    Imagine that you are tasked to help a project improve their testing effort. In a realistic scenario it will quickly become clear, that having an impact is diffcult. First of all, it will likely be a challenge to suggest an alternative approach which is significantly more automated and/or more effective than current practice. The reality is that an average software system has a complex input/output behavior. An automated testing approach will have to auto-generate test cases, each being a pair (i; o) consisting of a test input i and an oracle o. The test input i has to be somewhat meaningful, and the oracle o can be very complicated to compute. Second, even in case where some testing technology has been developed that might improve current practice, it is then likely difficult to completely change the current behavior of the testing team unless the technique is obviously superior and does everything already done by existing technology. So is there an easier way to incorporate formal methods-based approaches than the full edged test revolution? Fortunately the answer is affirmative. A relatively simple approach is to benefit from possibly already existing logging infrastructure, which after all is part of most systems put in production. A log is a sequence of events, generated by special log recording statements, most often manually inserted in the code by the programmers. An event can be considered as a data record: a mapping from field names to values. We can analyze such a log using formal methods, for example checking it against a formal specification. This separates running the system for analyzing its behavior. It is not meant as an alternative to testing since it does not address the important in- put generation problem. However, it offers a solution which testing teams might accept since it has low impact on the existing process. A single person might be assigned to perform such log analysis, compared to the entire testing team changing behavior.

  15. 49 CFR 236.1043 - Task analysis and basic requirements.

    Science.gov (United States)

    2010-10-01

    ... Train Control Systems § 236.1043 Task analysis and basic requirements. (a) Training structure and... classroom, simulator, computer-based, hands-on, or other formally structured training designed to impart the... 49 Transportation 4 2010-10-01 2010-10-01 false Task analysis and basic requirements. 236.1043...

  16. 49 CFR 236.923 - Task analysis and basic requirements.

    Science.gov (United States)

    2010-10-01

    ... for Processor-Based Signal and Train Control Systems § 236.923 Task analysis and basic requirements... structured training designed to impart the knowledge, skills, and abilities identified as necessary to... 49 Transportation 4 2010-10-01 2010-10-01 false Task analysis and basic requirements. 236.923...

  17. Effect of a cylindrical thin-shell of matter on the electrostatic self-force on a charge

    Energy Technology Data Exchange (ETDEWEB)

    Rubin de Celis, Emilio [Universidad de Buenos Aires y IFIBA, Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Buenos Aires (Argentina)

    2016-02-15

    The electrostatic self-force on a point charge in cylindrical thin-shell space-times is interpreted as the sum of a bulk field and a shell field. The bulk part corresponds to a field sourced by the test charge placed in a space-time without the shell. The shell field accounts for the discontinuity of the extrinsic curvature κ{sup p}{sub q}. An equivalent electric problem is stated, in which the effect of the shell of matter on the field is reconstructed with the electric potential produced by a non-gravitating charge distribution of total image charge Q, to interpret the shell field in both the interior and exterior regions of the space-time. The self-force on a point charge q in a locally flat geometry with a cylindrical thin-shell of matter is calculated. The charge is repelled from the shell if κ{sup p}{sub q} = κ < 0 (ordinarymatter) and attracted toward the shell if κ > 0 (exotic matter). The total image charge is zero for exterior problems, while for interior problems Q/q = κr{sub e}, with re the external radius of the shell. The procedure is general and can be applied to interpret self-forces in other space-times with shells, e.g., for locally flat wormholes we found Q{sub -+}{sup wh}/q = -1/(κ{sub wh}r{sub ±}). (orig.)

  18. Orbital evolution of a test particle around a black hole: indirect determination of the self-force in the post-Newtonian approximation

    International Nuclear Information System (INIS)

    Burko, Lior M

    2006-01-01

    Comparing the corrections to Kepler's law with orbital evolution under a self-force, we extract the finite, already regularized part of the latter in a specific gauge. We apply this method to a quasi-circular orbit around a Schwarzschild black hole of an extreme mass ratio binary, and determine the first- and second-order conservative gravitational self-force in a post-Newtonian expansion. We use these results in the construction of the gravitational waveform, and revisit the question of the relative contribution of the self-force and spin-orbit coupling

  19. Technical requirements document for the waste flow analysis

    International Nuclear Information System (INIS)

    Shropshire, D.E.

    1996-05-01

    Purpose of this Technical Requirements Document is to define the top level customer requirements for the Waste Flow Analysis task. These requirements, once agreed upon with DOE, will be used to flow down subsequent development requirements to the model specifications. This document is intended to be a ''living document'' which will be modified over the course of the execution of this work element. Initial concurrence with the technical functional requirements from Environmental Management (EM)-50 is needed before the work plan can be developed

  20. Knowledge-based requirements analysis for automating software development

    Science.gov (United States)

    Markosian, Lawrence Z.

    1988-01-01

    We present a new software development paradigm that automates the derivation of implementations from requirements. In this paradigm, informally-stated requirements are expressed in a domain-specific requirements specification language. This language is machine-understable and requirements expressed in it are captured in a knowledge base. Once the requirements are captured, more detailed specifications and eventually implementations are derived by the system using transformational synthesis. A key characteristic of the process is that the required human intervention is in the form of providing problem- and domain-specific engineering knowledge, not in writing detailed implementations. We describe a prototype system that applies the paradigm in the realm of communication engineering: the prototype automatically generates implementations of buffers following analysis of the requirements on each buffer.

  1. Effect of a cylindrical thin-shell of matter on the electrostatic self-force on a charge

    OpenAIRE

    de Celis, Emilio Rubín

    2015-01-01

    The electrostatic self-force on a point charge in cylindrical thin-shell space-times is interpreted as the sum of a $bulk$ field and a $shell$ field. The $bulk$ part corresponds to a field sourced by the test charge placed in a space-time without the shell. The $shell$ field accounts for the discontinuity of the extrinsic curvature ${\\kappa^p}_q$. An equivalent electric problem is stated, in which the effect of the shell of matter on the field is reconstructed with the electric potential prod...

  2. ANALYSIS OF MPC ACCESS REQUIREMENTS FOR ADDITION OF FILLER MATERIALS

    International Nuclear Information System (INIS)

    W. Wallin

    1996-01-01

    This analysis is prepared by the Mined Geologic Disposal System (MGDS) Waste Package Development Department (WPDD) in response to a request received via a QAP-3-12 Design Input Data Request (Ref. 5.1) from WAST Design (formerly MRSMPC Design). The request is to provide: Specific MPC access requirements for the addition of filler materials at the MGDS (i.e., location and size of access required). The objective of this analysis is to provide a response to the foregoing request. The purpose of this analysis is to provide a documented record of the basis for the response. The response is stated in Section 8 herein. The response is based upon requirements from an MGDS perspective

  3. A performance requirements analysis of the SSC control system

    International Nuclear Information System (INIS)

    Hunt, S.M.; Low, K.

    1992-01-01

    This paper presents the results of analysis of the performance requirements of the Superconducting Super Collider Control System. We quantify the performance requirements of the system in terms of response time, throughput and reliability. We then examine the effect of distance and traffic patterns on control system performance and examine how these factors influence the implementation of the control network architecture and compare the proposed system against those criteria. (author)

  4. A Framework for RFID Survivability Requirement Analysis and Specification

    Science.gov (United States)

    Zuo, Yanjun; Pimple, Malvika; Lande, Suhas

    Many industries are becoming dependent on Radio Frequency Identification (RFID) technology for inventory management and asset tracking. The data collected about tagged objects though RFID is used in various high level business operations. The RFID system should hence be highly available, reliable, and dependable and secure. In addition, this system should be able to resist attacks and perform recovery in case of security incidents. Together these requirements give rise to the notion of a survivable RFID system. The main goal of this paper is to analyze and specify the requirements for an RFID system to become survivable. These requirements, if utilized, can assist the system in resisting against devastating attacks and recovering quickly from damages. This paper proposes the techniques and approaches for RFID survivability requirements analysis and specification. From the perspective of system acquisition and engineering, survivability requirement is the important first step in survivability specification, compliance formulation, and proof verification.

  5. Operations other than war: Requirements for analysis tools research report

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, D.S. III

    1996-12-01

    This report documents the research effort to determine the requirements for new or improved analysis tools to support decisions at the strategic and operational levels for military Operations Other than War (OOTW). The work was performed for the Commander in Chief, U.S. Pacific Command (USCINCPAC). The data collection was based on workshops attended by experts in OOTWs: analysis personnel from each of the Combatant Commands, the Services, the Office of the Secretary of Defense (OSD), the Joint Staff, and other knowledgeable personnel. Further data were gathered from other workshops and conferences and from the literature. The results of this research begin with the creation of a taxonomy of OOTWs: categories of operations, attributes of operations, and tasks requiring analytical support. The tasks are connected to the Joint Staff`s Universal Joint Task List (UJTL). Historical OOTWs are analyzed to produce frequency distributions by category and responsible CINC. The analysis products are synthesized into a list of requirements for analytical tools and definitions of the requirements. The report concludes with a timeline or roadmap for satisfying the requirements.

  6. Defining Antimicrobial Textile Requirements for Military Applications - A Gap Analysis

    Science.gov (United States)

    2016-05-09

    yard of fabric for the ACU. The antimicrobial added to the Fire - Resistant Environmental Ensemble (FREE) socks increased cost about $2 per pair...There were also very little conclusive laboratory and field test data on the effectiveness, risks, and potential for bacterial resistance of use of...RISK ANALYSIS LABORATORY TESTS TEST AND EVALUATION FABRICS BODY ODOR REQUIREMENTS FUNGAL INFECTIONS

  7. 18 CFR 35.37 - Market power analysis required.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Market power analysis required. 35.37 Section 35.37 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... Wholesale Sales of Electric Energy, Capacity and Ancillary Services at Market-Based Rates § 35.37 Market...

  8. Fusing Quantitative Requirements Analysis with Model-based Systems Engineering

    Science.gov (United States)

    Cornford, Steven L.; Feather, Martin S.; Heron, Vance A.; Jenkins, J. Steven

    2006-01-01

    A vision is presented for fusing quantitative requirements analysis with model-based systems engineering. This vision draws upon and combines emergent themes in the engineering milieu. "Requirements engineering" provides means to explicitly represent requirements (both functional and non-functional) as constraints and preferences on acceptable solutions, and emphasizes early-lifecycle review, analysis and verification of design and development plans. "Design by shopping" emphasizes revealing the space of options available from which to choose (without presuming that all selection criteria have previously been elicited), and provides means to make understandable the range of choices and their ramifications. "Model-based engineering" emphasizes the goal of utilizing a formal representation of all aspects of system design, from development through operations, and provides powerful tool suites that support the practical application of these principles. A first step prototype towards this vision is described, embodying the key capabilities. Illustrations, implications, further challenges and opportunities are outlined.

  9. State analysis requirements database for engineering complex embedded systems

    Science.gov (United States)

    Bennett, Matthew B.; Rasmussen, Robert D.; Ingham, Michel D.

    2004-01-01

    It has become clear that spacecraft system complexity is reaching a threshold where customary methods of control are no longer affordable or sufficiently reliable. At the heart of this problem are the conventional approaches to systems and software engineering based on subsystem-level functional decomposition, which fail to scale in the tangled web of interactions typically encountered in complex spacecraft designs. Furthermore, there is a fundamental gap between the requirements on software specified by systems engineers and the implementation of these requirements by software engineers. Software engineers must perform the translation of requirements into software code, hoping to accurately capture the systems engineer's understanding of the system behavior, which is not always explicitly specified. This gap opens up the possibility for misinterpretation of the systems engineer's intent, potentially leading to software errors. This problem is addressed by a systems engineering tool called the State Analysis Database, which provides a tool for capturing system and software requirements in the form of explicit models. This paper describes how requirements for complex aerospace systems can be developed using the State Analysis Database.

  10. Gravitational self-force correction to the innermost stable circular equatorial orbit of a Kerr black hole.

    Science.gov (United States)

    Isoyama, Soichiro; Barack, Leor; Dolan, Sam R; Le Tiec, Alexandre; Nakano, Hiroyuki; Shah, Abhay G; Tanaka, Takahiro; Warburton, Niels

    2014-10-17

    For a self-gravitating particle of mass μ in orbit around a Kerr black hole of mass M ≫ μ, we compute the O(μ/M) shift in the frequency of the innermost stable circular equatorial orbit due to the conservative piece of the gravitational self-force acting on the particle. Our treatment is based on a Hamiltonian formulation of the dynamics in terms of geodesic motion in a certain locally defined effective smooth spacetime. We recover the same result using the so-called first law of binary black-hole mechanics. We give numerical results for the innermost stable circular equatorial orbit frequency shift as a function of the black hole's spin amplitude, and compare with predictions based on the post-Newtonian approximation and the effective one-body model. Our results provide an accurate strong-field benchmark for spin effects in the general-relativistic two-body problem.

  11. Model-based human reliability analysis: prospects and requirements

    International Nuclear Information System (INIS)

    Mosleh, A.; Chang, Y.H.

    2004-01-01

    Major limitations of the conventional methods for human reliability analysis (HRA), particularly those developed for operator response analysis in probabilistic safety assessments (PSA) of nuclear power plants, are summarized as a motivation for the need and a basis for developing requirements for the next generation HRA methods. It is argued that a model-based approach that provides explicit cognitive causal links between operator behaviors and directly or indirectly measurable causal factors should be at the core of the advanced methods. An example of such causal model is briefly reviewed, where due to the model complexity and input requirements can only be currently implemented in a dynamic PSA environment. The computer simulation code developed for this purpose is also described briefly, together with current limitations in the models, data, and the computer implementation

  12. Functional Requirement Analysis and Function Allocation for APR 1400

    International Nuclear Information System (INIS)

    Nuraslinda, Anuar; Florah, Kamanja; Noloyiso, Mtoko and others

    2013-01-01

    This paper intends to fulfill the FRA and FA of the HFE as required in Chapter 4 of NUREG-0711 rev. 3 for APR1400 to satisfy both plant safety and power generation objectives. This paper aims to evaluate the FRA and FA for APR1400. The allocation of function is done at the system level for all processes for both the power generation and safety goals, following the NUREG/CR-3331 guideline. As a conclusion, this paper has successfully implemented the requirements and methodology specified in NUREG-0711 for APR 1400. The Functional Requirement Analysis (FRA) and Function Allocation (FA) are required by the regulation in the Human Factors Engineering (HFE) program. The FRA defines the functions, processes, and system for plant safety and power generation. The FA allocates the functions to human operator, automation, or a combination of two. The FRA and FA for APR1400 have been performed in the very early stage of development but only for the plant safety. However, the analysis did not include the goal of power generation and also did not fully satisfy the latest revision of NUREG-0711

  13. Wireless Technology Use Case Requirement Analysis for Future Space Applications

    Science.gov (United States)

    Abedi, Ali; Wilkerson, DeLisa

    2016-01-01

    This report presents various use case scenarios for wireless technology -including radio frequency (RF), optical, and acoustic- and studies requirements and boundary conditions in each scenario. The results of this study can be used to prioritize technology evaluation and development and in the long run help in development of a roadmap for future use of wireless technology. The presented scenarios cover the following application areas: (i) Space Vehicles (manned/unmanned), (ii) Satellites and Payloads, (iii) Surface Explorations, (iv) Ground Systems, and (v) Habitats. The requirement analysis covers two parallel set of conditions. The first set includes the environmental conditions such as temperature, radiation, noise/interference, wireless channel characteristics and accessibility. The second set of requirements are dictated by the application and may include parameters such as latency, throughput (effective data rate), error tolerance, and reliability. This report provides a comprehensive overview of all requirements from both perspectives and details their effects on wireless system reliability and network design. Application area examples are based on 2015 NASA Technology roadmap with specific focus on technology areas: TA 2.4, 3.3, 5.2, 5.5, 6.4, 7.4, and 10.4 sections that might benefit from wireless technology.

  14. Extending and automating a Systems-Theoretic hazard analysis for requirements generation and analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, John (Massachusetts Institute of Technology)

    2012-05-01

    Systems Theoretic Process Analysis (STPA) is a powerful new hazard analysis method designed to go beyond traditional safety techniques - such as Fault Tree Analysis (FTA) - that overlook important causes of accidents like flawed requirements, dysfunctional component interactions, and software errors. While proving to be very effective on real systems, no formal structure has been defined for STPA and its application has been ad-hoc with no rigorous procedures or model-based design tools. This report defines a formal mathematical structure underlying STPA and describes a procedure for systematically performing an STPA analysis based on that structure. A method for using the results of the hazard analysis to generate formal safety-critical, model-based system and software requirements is also presented. Techniques to automate both the analysis and the requirements generation are introduced, as well as a method to detect conflicts between the safety and other functional model-based requirements during early development of the system.

  15. Software requirements definition Shipping Cask Analysis System (SCANS)

    International Nuclear Information System (INIS)

    Johnson, G.L.; Serbin, R.

    1985-01-01

    The US Nuclear Regulatory Commission (NRC) staff reviews the technical adequacy of applications for certification of designs of shipping casks for spent nuclear fuel. In order to confirm an acceptable design, the NRC staff may perform independent calculations. The current NRC procedure for confirming cask design analyses is laborious and tedious. Most of the work is currently done by hand or through the use of a remote computer network. The time required to certify a cask can be long. The review process may vary somewhat with the engineer doing the reviewing. Similarly, the documentation on the results of the review can also vary with the reviewer. To increase the efficiency of this certification process, LLNL was requested to design and write an integrated set of user-oriented, interactive computer programs for a personal microcomputer. The system is known as the NRC Shipping Cask Analysis System (SCANS). The computer codes and the software system supporting these codes are being developed and maintained for the NRC by LLNL. The objective of this system is generally to lessen the time and effort needed to review an application. Additionally, an objective of the system is to assure standardized methods and documentation of the confirmatory analyses used in the review of these cask designs. A software system should be designed based on NRC-defined requirements contained in a requirements document. The requirements document is a statement of a project's wants and needs as the users and implementers jointly understand them. The requirements document states the desired end products (i.e. WHAT's) of the project, not HOW the project provides them. This document describes the wants and needs for the SCANS system. 1 fig., 3 tabs

  16. Mediating Informal Care Online: Findings from an Extensive Requirements Analysis

    Directory of Open Access Journals (Sweden)

    Christiane Moser

    2015-05-01

    Full Text Available Organizing and satisfying the increasing demand for social and informal care for older adults is an important topic. We aim at building a peer-to-peer exchange platform that empowers older adults to benefit from receiving support for daily activities and reciprocally offering support to others. In situated interviews and within a survey we investigated the requirements and needs of 246 older adults with mild impairments. Additionally, we conducted an interpretative role analysis of older adults’ collaborative care processes (i.e., support exchange practices in order to identify social roles and understand the inherent expectations towards the execution of support. We will describe our target group in the form of personas and different social roles, as well as user requirements for establishing a successful peer-to-peer collaboration. We also consider our finding from the perspective of social capital theory that allows us to describe in our requirements how relationships provide valuable social resources (i.e., social capital for informal and social care.

  17. Comparative analysis on flexibility requirements of typical Cryogenic Transfer lines

    Science.gov (United States)

    Jadon, Mohit; Kumar, Uday; Choukekar, Ketan; Shah, Nitin; Sarkar, Biswanath

    2017-04-01

    The cryogenic systems and their applications; primarily in large Fusion devices, utilize multiple cryogen transfer lines of various sizes and complexities to transfer cryogenic fluids from plant to the various user/ applications. These transfer lines are composed of various critical sections i.e. tee section, elbows, flexible components etc. The mechanical sustainability (under failure circumstances) of these transfer lines are primary requirement for safe operation of the system and applications. The transfer lines need to be designed for multiple design constraints conditions like line layout, support locations and space restrictions. The transfer lines are subjected to single load and multiple load combinations, such as operational loads, seismic loads, leak in insulation vacuum loads etc. [1]. The analytical calculations and flexibility analysis using professional software are performed for the typical transfer lines without any flexible component, the results were analysed for functional and mechanical load conditions. The failure modes were identified along the critical sections. The same transfer line was then refurbished with the flexible components and analysed for failure modes. The flexible components provide additional flexibility to the transfer line system and make it safe. The results obtained from the analytical calculations were compared with those obtained from the flexibility analysis software calculations. The optimization of the flexible component’s size and selection was performed and components were selected to meet the design requirements as per code.

  18. Reliability analysis and initial requirements for FC systems and stacks

    Science.gov (United States)

    Åström, K.; Fontell, E.; Virtanen, S.

    In the year 2000 Wärtsilä Corporation started an R&D program to develop SOFC systems for CHP applications. The program aims to bring to the market highly efficient, clean and cost competitive fuel cell systems with rated power output in the range of 50-250 kW for distributed generation and marine applications. In the program Wärtsilä focuses on system integration and development. System reliability and availability are key issues determining the competitiveness of the SOFC technology. In Wärtsilä, methods have been implemented for analysing the system in respect to reliability and safety as well as for defining reliability requirements for system components. A fault tree representation is used as the basis for reliability prediction analysis. A dynamic simulation technique has been developed to allow for non-static properties in the fault tree logic modelling. Special emphasis has been placed on reliability analysis of the fuel cell stacks in the system. A method for assessing reliability and critical failure predictability requirements for fuel cell stacks in a system consisting of several stacks has been developed. The method is based on a qualitative model of the stack configuration where each stack can be in a functional, partially failed or critically failed state, each of the states having different failure rates and effects on the system behaviour. The main purpose of the method is to understand the effect of stack reliability, critical failure predictability and operating strategy on the system reliability and availability. An example configuration, consisting of 5 × 5 stacks (series of 5 sets of 5 parallel stacks) is analysed in respect to stack reliability requirements as a function of predictability of critical failures and Weibull shape factor of failure rate distributions.

  19. Models and data requirements for human reliability analysis

    International Nuclear Information System (INIS)

    1989-03-01

    It has been widely recognised for many years that the safety of the nuclear power generation depends heavily on the human factors related to plant operation. This has been confirmed by the accidents at Three Mile Island and Chernobyl. Both these cases revealed how human actions can defeat engineered safeguards and the need for special operator training to cover the possibility of unexpected plant conditions. The importance of the human factor also stands out in the analysis of abnormal events and insights from probabilistic safety assessments (PSA's), which reveal a large proportion of cases having their origin in faulty operator performance. A consultants' meeting, organized jointly by the International Atomic Energy Agency (IAEA) and the International Institute for Applied Systems Analysis (IIASA) was held at IIASA in Laxenburg, Austria, December 7-11, 1987, with the aim of reviewing existing models used in Probabilistic Safety Assessment (PSA) for Human Reliability Analysis (HRA) and of identifying the data required. The report collects both the contributions offered by the members of the Expert Task Force and the findings of the extensive discussions that took place during the meeting. Refs, figs and tabs

  20. Front Loaded Accurate Requirements Engineering (FLARE): A Requirements Analysis Concept for the 21st Century

    National Research Council Canada - National Science Library

    Leonard, Anthony

    1997-01-01

    This thesis focuses on ways to apply requirements engineering techniques and methods during the development and evolution of DoD software systems in an effort to reduce changes to system requirements...

  1. Uncertainty Analysis via Failure Domain Characterization: Unrestricted Requirement Functions

    Science.gov (United States)

    Crespo, Luis G.; Kenny, Sean P.; Giesy, Daniel P.

    2011-01-01

    This paper proposes an uncertainty analysis framework based on the characterization of the uncertain parameter space. This characterization enables the identification of worst-case uncertainty combinations and the approximation of the failure and safe domains with a high level of accuracy. Because these approximations are comprised of subsets of readily computable probability, they enable the calculation of arbitrarily tight upper and lower bounds to the failure probability. The methods developed herein, which are based on nonlinear constrained optimization, are applicable to requirement functions whose functional dependency on the uncertainty is arbitrary and whose explicit form may even be unknown. Some of the most prominent features of the methodology are the substantial desensitization of the calculations from the assumed uncertainty model (i.e., the probability distribution describing the uncertainty) as well as the accommodation for changes in such a model with a practically insignificant amount of computational effort.

  2. Uncertainty Analysis via Failure Domain Characterization: Polynomial Requirement Functions

    Science.gov (United States)

    Crespo, Luis G.; Munoz, Cesar A.; Narkawicz, Anthony J.; Kenny, Sean P.; Giesy, Daniel P.

    2011-01-01

    This paper proposes an uncertainty analysis framework based on the characterization of the uncertain parameter space. This characterization enables the identification of worst-case uncertainty combinations and the approximation of the failure and safe domains with a high level of accuracy. Because these approximations are comprised of subsets of readily computable probability, they enable the calculation of arbitrarily tight upper and lower bounds to the failure probability. A Bernstein expansion approach is used to size hyper-rectangular subsets while a sum of squares programming approach is used to size quasi-ellipsoidal subsets. These methods are applicable to requirement functions whose functional dependency on the uncertainty is a known polynomial. Some of the most prominent features of the methodology are the substantial desensitization of the calculations from the uncertainty model assumed (i.e., the probability distribution describing the uncertainty) as well as the accommodation for changes in such a model with a practically insignificant amount of computational effort.

  3. Economic analysis requirements in support of orbital debris regulatory policy

    Science.gov (United States)

    Greenberg, Joel S.

    1996-10-01

    As the number of Earth orbiting objects increases so does the potential for generating orbital debris with the consequent increase in the likelihood of impacting and damaging operating satellites. Various debris remediation approaches are being considered that encompass both in-orbit and return-to-Earth schema and have varying degrees of operations, cost, international competitiveness, and safety implications. Because of the diversity of issues, concerns and long-term impacts, there is a clear need for the setting of government policies that will lead to an orderly abatement of the potential orbital debris hazards. These policies may require the establishment of a supportive regulatory regime. The Department of Transportation is likely to have regulatory responsibilities relating to orbital debris stemming from its charge to protect the public health and safety, safety of property, and national security interests and foreign policy interests of the United States. This paper describes DOT's potential regulatory role relating to orbital debris remediation, the myriad of issues concerning the need for establishing government policies relating to orbital debris remediation and their regulatory implications, the proposed technological solutions and their economic and safety implications. Particular emphasis is placed upon addressing cost-effectiveness and economic analyses as they relate to economic impact analysis in support of regulatory impact analysis.

  4. Access Requirement Analysis of E-Governance Systems

    Science.gov (United States)

    Kim, Tai-Hoon

    The strategic and contemporary importance of e-governance has been recognized across the world. In India too, various ministries of Govt. of India and State Governments have taken e-governance initiatives to provide e-services to citizens and the business they serve. To achieve the mission objectives, and make such e-governance initiatives successful it would be necessary to improve the trust and confidence of the stakeholders. It is assumed that the delivery of government services will share the same public network information that is being used in the community at large. In particular, the Internet will be the principal means by which public access to government and government services will be achieved. To provide the security measures main aim is to identify user's access requirement for the stakeholders and then according to the models of Nath's approach. Based on this analysis, the Govt. can also make standards of security based on the e-governance models. Thus there will be less human errors and bias. This analysis leads to the security architecture of the specific G2C application.

  5. Reliability and availability requirements analysis for DEMO: fuel cycle system

    International Nuclear Information System (INIS)

    Pinna, T.; Borgognoni, F.

    2015-01-01

    The Demonstration Power Plant (DEMO) will be a fusion reactor prototype designed to demonstrate the capability to produce electrical power in a commercially acceptable way. Two of the key elements of the engineering development of the DEMO reactor are the definitions of reliability and availability requirements (or targets). The availability target for a hypothesized Fuel Cycle has been analysed as a test case. The analysis has been done on the basis of the experience gained in operating existing tokamak fusion reactors and developing the ITER design. Plant Breakdown Structure (PBS) and Functional Breakdown Structure (FBS) related to the DEMO Fuel Cycle and correlations between PBS and FBS have been identified. At first, a set of availability targets has been allocated to the various systems on the basis of their operating, protection and safety functions. 75% and 85% of availability has been allocated to the operating functions of fuelling system and tritium plant respectively. 99% of availability has been allocated to the overall systems in executing their safety functions. The chances of the systems to achieve the allocated targets have then been investigated through a Failure Mode and Effect Analysis and Reliability Block Diagram analysis. The following results have been obtained: 1) the target of 75% for the operations of the fuelling system looks reasonable, while the target of 85% for the operations of the whole tritium plant should be reduced to 80%, even though all the tritium plant systems can individually reach quite high availability targets, over 90% - 95%; 2) all the DEMO Fuel Cycle systems can reach the target of 99% in accomplishing their safety functions. (authors)

  6. A public finance analysis of multiple reserve requirements

    OpenAIRE

    Espinosa-Vega, Marco; Russell, Steven

    1998-01-01

    This paper analyzes multiple reserve requirements of the type that have been imposed by a number of developing countries. We show that previous theoretical work on this topic has not succeeded in providing a social welfare rationale for the existence of multiple reserve requirements: in the basic reserve requirements model, any allocation that can be supported by a multiple-reserves regime can also be supported by a single-bond reserve requirement. We go on to present extended versions of the...

  7. Analysis of the Requirements Generation Process for the Logistics Analysis and Wargame Support Tool

    Science.gov (United States)

    2017-06-01

    impact everything from strategic logistic operations down to the energy demands at the company level. It also looks at the force structure of the...this requirement. 34. The system shall determine the efficiency of the logistics network with respect to an estimated cost of fuel used to deliver...REQUIREMENTS GENERATION PROCESS FOR THE LOGISTICS ANALYSIS AND WARGAME SUPPORT TOOL by Jonathan M. Swan June 2017 Thesis Advisor

  8. Systems and context modeling approach to requirements analysis

    Science.gov (United States)

    Ahuja, Amrit; Muralikrishna, G.; Patwari, Puneet; Subhrojyoti, C.; Swaminathan, N.; Vin, Harrick

    2014-08-01

    Ensuring completeness and correctness of the requirements for a complex system such as the SKA is challenging. Current system engineering practice includes developing a stakeholder needs definition, a concept of operations, and defining system requirements in terms of use cases and requirements statements. We present a method that enhances this current practice into a collection of system models with mutual consistency relationships. These include stakeholder goals, needs definition and system-of-interest models, together with a context model that participates in the consistency relationships among these models. We illustrate this approach by using it to analyze the SKA system requirements.

  9. Exploring employer job requirements: An analysis of pharmacy job announcements.

    Science.gov (United States)

    Wheeler, James S; Ngo, Tien; Cecil, Jasmine; Borja-Hart, Nancy

    Postgraduate training, dual degrees, and board certifications are credentials viewed by academic pharmacy communities and professional organizations as positive assets for those seeking pharmacist jobs; however, a key question merits further investigation: do these views match employer expectations? The primary objective of this study was to identify the most common qualifications employers require as stated in job advertisements. Pharmacist job postings from the aggregate jobs website Indeed.com were evaluated for the 20 largest metropolitan areas in the United States. Search criteria included: pharmacist, full-time, and within a 50-mile radius of the metropolitan area. Positions were excluded if they were not pharmacist specific, did not require a pharmacy degree, were part-time, or were temporary. Required and preferred qualifications were collected in the following categories: practice type, experience needed, training, certification, and desired skills. Six hundred and eleven of 1356 postings met inclusion criteria. Positions were classified as community (113), health-system (264), industry (149), academia (9), or other (76). Four hundred and six (66.4%) required a minimum of a Bachelor's of Pharmacy degree, while 174 (28.4%) required a Doctor of Pharmacy degree. Experience was required for 467 positions (range of 6 months to 14 years). Postgraduate training was required for 73 positions (66 residency/7 fellowship). One job required a Master's degree, type unspecified. BPS certifications were required for 7 positions (1.1%) and preferred for 22 positions (3.6%). Certifications and skills most required by employers were verbal and written skills (248), Microsoft Office proficiency (93), immunization certifications (51), and Basic Life Support/Cardiopulmonary Resuscitation certifications (37). Postgraduate training, dual degrees, and board certification were not significant factors in the qualification criteria for the positions identified. The qualifications

  10. A Method for Software Requirement Volatility Analysis Using QFD

    Directory of Open Access Journals (Sweden)

    Yunarso Anang

    2016-10-01

    Full Text Available Changes of software requirements are inevitable during the development life cycle. Rather than avoiding the circumstance, it is easier to just accept it and find a way to anticipate those changes. This paper proposes a method to analyze the volatility of requirement by using the Quality Function Deployment (QFD method and the introduced degree of volatility. Customer requirements are deployed to software functions and subsequently to architectural design elements. And then, after determining the potential for changes of the design elements, the degree of volatility of the software requirements is calculated. In this paper the method is described using a flow diagram and illustrated using a simple example, and is evaluated using a case study.

  11. Warfarin Dosing Algorithms Underpredict Dose Requirements in Patients Requiring ≥7 mg Daily: A Systematic Review and Meta-analysis.

    Science.gov (United States)

    Saffian, S M; Duffull, S B; Wright, Dfb

    2017-08-01

    There is preliminary evidence to suggest that some published warfarin dosing algorithms produce biased maintenance dose predictions in patients who require higher than average doses. We conducted a meta-analysis of warfarin dosing algorithms to determine if there exists a systematic under- or overprediction of dose requirements for patients requiring ≥7 mg/day across published algorithms. Medline and Embase databases were searched up to September 2015. We quantified the proportion of over- and underpredicted doses in patients whose observed maintenance dose was ≥7 mg/day. The meta-analysis included 47 evaluations of 22 different warfarin dosing algorithms from 16 studies. The meta-analysis included data from 1,492 patients who required warfarin doses of ≥7 mg/day. All 22 algorithms were found to underpredict warfarin dosing requirements in patients who required ≥7 mg/day by an average of 2.3 mg/day with a pooled estimate of underpredicted doses of 92.3% (95% confidence interval 90.3-94.1, I 2 = 24%). © 2017 American Society for Clinical Pharmacology and Therapeutics.

  12. Poloidal flux requirement: Analysis and application to the Ignitor configuration

    International Nuclear Information System (INIS)

    Nassi, M.

    1993-01-01

    The definitions and correlations existing between different terms used by physicists and engineers are clarified in order to deal with the assessment of the poloidal flux requirement in a fusion experiment. The theoretical formulation of both the Faraday and the Poynting methods, for the internal flux evaluation, is briefly reviewed. Heuristic expressions that allow estimates of internal flux consumption are reported for the specific case of an ignition experiment represented by the Ignitor configuration. The analytical and heuristic results for both internal and external poloidal flux requirements are checked against numerical evaluations carried out by using the TSC transport and magnetohydrodynamics code and the TEQ equilibrium code. A fairly good agreement between the different estimates is found. This suggests that simple heuristic expressions can be used to evaluate the poloidal flux requirement of future experiments, even if a detailed simulation of the plasma current penetration process is strongly recommended to correctly assess and optimize the resistive poloidal flux consumption. Finally, the poloidal flux requirement for different plasma scenarios in the Ignitor experiment is compared with the magnetic flux variation that can be delivered by the poloidal field system. 28 refs., 4 figs., 10 tabs

  13. e-Coaching for Intensive Cardiac Rehabilitation : a Requirement Analysis

    NARCIS (Netherlands)

    Nooitgedagt, A.; Beun, R.J.; Dignum, F.P.M.

    2017-01-01

    In this paper, the rationale and requirements are presented for an e-coaching system in the domain of intensive cardiac rehabilitation. It is argued that there is a need for a personalized program with close monitoring of the patient based on medical needs and needed lifestyle changes in a setting

  14. Analysis of the energy requirement for household consumption

    NARCIS (Netherlands)

    Vringer, Kees

    2005-01-01

    Humans in households use energy for their activities. This use is both direct, for example electricity and natural gas, but also indirect, for the production, transport and trade of other goods and services. The main objective of this thesis is to gain insight into the energy requirement associated

  15. An analysis of USMC heavy construction equipment (HCE) requirements

    OpenAIRE

    Blaxton, Allen C.; Fay, Michael J.; Hansen, Cheryl M.; Zuchristian, Christopher M.

    2003-01-01

    MBA Professional Report Approved for public release; distribution is unlimited. According to I and L, HQMC, the Marine Corps needs to re-evaluate current operational requirements for engineer construction equipment. Acquisition and force allocation levels for equipment have remained essentially at constant 1970's, Cold War levels. Because acquisition and allocation levels haven't changed at the same rate as personnel, there is a perception that much of the existing equipment is unnecess...

  16. Army Materiel Requirements Documents: Qualitative Analysis of Efficiency and Effectiveness

    Science.gov (United States)

    2013-06-01

    focuses on the program’s time to execute their mission based off the MRDs/MCDs. We measure efficiency based on two BPP initiatives: (1) Build...definitions of each BPP initiative during our interviews. A poor rating indicates the requirement documents did not sufficiently support the program...in terms of efficiency and effectiveness according to BPP initiatives. For efficiency, we assign a qualitative measure based on SME responses across

  17. Analysis on the fuel cycle requirements of the FR systems

    International Nuclear Information System (INIS)

    Maki, Takashi; Horiuchi, Nobutake

    2002-01-01

    The functions of the nuclear fuel cycle amount analysis code, developed in 2001 were extended. This code is a program that calculates the change in characteristics with time of mass balance (for example, the amount of natural uranium demand, plutonium mass balance, environmental load reduction, etc.) in a nuclear fuel cycle, to examine the state of future reactor types or recycling facilities. In 2002, as for this code, calculation functions of reprocessing facilities on plutonium-thermal spent fuels, recovery uranium recycling, and multiple FR concepts were added, and the I/O function was improved according to it. Moreover, benchmark calculation to the extended amount analysis code was performed using the other tool, and it was confirmed that mass balance was calculated appropriately. Furthermore, the mass balance of a few typical FR cycle concepts was calculated in this analysis code, and the feature of each concept was clarified. (author)

  18. Analysis on the fuel cycle requirements of the FR systems

    International Nuclear Information System (INIS)

    Maki, Takashi; Horiuchi, Nobutake

    2003-01-01

    The functions of the nuclear fuel cycle amount analysis code, developed in 2002 were extended. This code calculates the change in characteristics with time of mass balance (for example, the amount of natural uranium demand, plutonium mass balance, environmental load reduction, etc.) in nuclear fuel cycles, to examine the state of future reactor types or recycling facilities. In 2003, as for this code, calculation functions of automatic adjustment of FR capacity, LWR's recovery minor actinide (MA) recycling, were added, and the I/O function was improved according to it. Moreover, benchmark calculation to the extended amount analysis code was performed using the other tool, and it was confirmed that mass balance was calculated appropriately. Furthermore, the mass balance of a few typical FR cycle concepts was calculated with this analysis code, and the further of each concept was clarified. (author)

  19. Automated analysis of security requirements through risk-based argumentation

    NARCIS (Netherlands)

    Yu, Yijun; Nunes Leal Franqueira, V.; Tun, Thein Tan; Wieringa, Roelf J.; Nuseibeh, Bashar

    2015-01-01

    Computer-based systems are increasingly being exposed to evolving security threats, which often reveal new vulnerabilities. A formal analysis of the evolving threats is difficult due to a number of practical considerations such as incomplete knowledge about the design, limited information about

  20. 32 CFR 989.38 - Requirements for analysis abroad.

    Science.gov (United States)

    2010-07-01

    ... EPF will generally perform the same functions for analysis of actions abroad that it performs in the... EA in the United States. The EPF documents a decision not to do an EIS. (c) For EISs dealing with the global commons, the EPF provides sufficient copies to HQ USAF/A7CI for the HQ USAF ESOHC review and AFCEE...

  1. Analysis of Slewing and Attitude Determination Requirements for CTEx

    Science.gov (United States)

    2010-03-01

    shield for radiation protection. • Mass : 375 g • Dimensions: 108 x 106 x 49 mm3 • Field of View: 138o x 138o unobstructed • Power Consumption: ɘ.25 W... Mass : 24 g • Dimensions: 30 x 30 x 14.5 mm3 • Field of View: 160o, full cone angle • Power Consumption: Passive • Operating Temperature: -50oC to +85oC...12 0.43 – 1.05 * 1.50 – 1.80 2.00 – 2.50 8.00 – 12.00 * Customised according user requirements FLI/PMI Fluorescence Line Imager

  2. Basic Expeditionary Airfield Resource (BEAR) Requirements Analysis Tool (BRAT)

    Science.gov (United States)

    2008-01-01

    analytical methods used to determine the quantity of BEAR assets needed to meet future requirements. Hunt 6 The SSSP documentation should be finalized...Personnel Bins Warning or Notification Time This variable directly relates to the transportation methods available to transport BEAR, as well as the...Avlll.bIt 3,109,596 FFI YIS Avllllblt VIS ~ i7 ATAR CSl MNlllni. Low CIviliIn No lImlttd .lImittd Nonl ’Non, 4I3,OOO:VRF YIS lkoknown Y,. !J;..~~ ~B

  3. Analysis Report for Exascale Storage Requirements for Scientific Data.

    Energy Technology Data Exchange (ETDEWEB)

    Ruwart, Thomas M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2018-02-01

    Over the next 10 years, the Department of Energy will be transitioning from Petascale to Exascale Computing resulting in data storage, networking, and infrastructure requirements to increase by three orders of magnitude. The technologies and best practices used today are the result of a relatively slow evolution of ancestral technologies developed in the 1950s and 1960s. These include magnetic tape, magnetic disk, networking, databases, file systems, and operating systems. These technologies will continue to evolve over the next 10 to 15 years on a reasonably predictable path. Experience with the challenges involved in transitioning these fundamental technologies from Terascale to Petascale computing systems has raised questions about how these will scale another 3 or 4 orders of magnitude to meet the requirements imposed by Exascale computing systems. This report is focused on the most concerning scaling issues with data storage systems as they relate to High Performance Computing- and presents options for a path forward. Given the ability to store exponentially increasing amounts of data, far more advanced concepts and use of metadata will be critical to managing data in Exascale computing systems.

  4. Analysis of Determinants in Filovirus Glycoproteins Required for Tetherin Antagonism

    Directory of Open Access Journals (Sweden)

    Kerstin Gnirß

    2014-04-01

    Full Text Available The host cell protein tetherin can restrict the release of enveloped viruses from infected cells. The HIV-1 protein Vpu counteracts tetherin by removing it from the site of viral budding, the plasma membrane, and this process depends on specific interactions between the transmembrane domains of Vpu and tetherin. In contrast, the glycoproteins (GPs of two filoviruses, Ebola and Marburg virus, antagonize tetherin without reducing surface expression, and the domains in GP required for tetherin counteraction are unknown. Here, we show that filovirus GPs depend on the presence of their authentic transmembrane domains for virus-cell fusion and tetherin antagonism. However, conserved residues within the transmembrane domain were dispensable for membrane fusion and tetherin counteraction. Moreover, the insertion of the transmembrane domain into a heterologous viral GP, Lassa virus GPC, was not sufficient to confer tetherin antagonism to the recipient. Finally, mutation of conserved residues within the fusion peptide of Ebola virus GP inhibited virus-cell fusion but did not ablate tetherin counteraction, indicating that the fusion peptide and the ability of GP to drive host cell entry are not required for tetherin counteraction. These results suggest that the transmembrane domains of filoviral GPs contribute to tetherin antagonism but are not the sole determinants.

  5. Modelling requirements for future assessments based on FEP analysis

    International Nuclear Information System (INIS)

    Locke, J.; Bailey, L.

    1998-01-01

    This report forms part of a suite of documents describing the Nirex model development programme. The programme is designed to provide a clear audit trail from the identification of significant features, events and processes (FEPs) to the models and modelling processes employed within a detailed safety assessment. A scenario approach to performance assessment has been adopted. It is proposed that potential evolutions of a deep geological radioactive waste repository can be represented by a base scenario and a number of variant scenarios. The base scenario is chosen to be broad-ranging and to represent the natural evolution of the repository system and its surrounding environment. The base scenario is defined to include all those FEPs that are certain to occur and those which are judged likely to occur for a significant period of the assessment timescale. The structuring of FEPs on a Master Directed Diagram (MDD) provides a systematic framework for identifying those FEPs that form part of the natural evolution of the system and those, which may define alternative potential evolutions of the repository system. In order to construct a description of the base scenario, FEPs have been grouped into a series of conceptual models. Conceptual models are groups of FEPs, identified from the MDD, representing a specific component or process within the disposal system. It has been found appropriate to define conceptual models in terms of the three main components of the disposal system: the repository engineered system, the surrounding geosphere and the biosphere. For each of these components, conceptual models provide a description of the relevant subsystem in terms of its initial characteristics, subsequent evolution and the processes affecting radionuclide transport for the groundwater and gas pathways. The aim of this document is to present the methodology that has been developed for deriving modelling requirements and to illustrate the application of the methodology by

  6. Plug and Process Loads Capacity and Power Requirements Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Sheppy, M.; Gentile-Polese, L.

    2014-09-01

    This report addresses gaps in actionable knowledge that would help reduce the plug load capacities designed into buildings. Prospective building occupants and real estate brokers lack accurate references for plug and process load (PPL) capacity requirements, so they often request 5-10 W/ft2 in their lease agreements. Limited initial data, however, suggest that actual PPL densities in leased buildings are substantially lower. Overestimating PPL capacity leads designers to oversize electrical infrastructure and cooling systems. Better guidance will enable improved sizing and design of these systems, decrease upfront capital costs, and allow systems to operate more energy efficiently. The main focus of this report is to provide industry with reliable, objective third-party guidance to address the information gap in typical PPL densities for commercial building tenants. This could drive changes in negotiations about PPL energy demands.

  7. A gap analysis of meteorological requirements for commercial space operators

    Science.gov (United States)

    Stapleton, Nicholas James

    Commercial space companies will soon be the primary method of launching people and supplies into orbit. Among the critical aspects of space launches are the meteorological concerns. Laws and regulations pertaining to meteorological considerations have been created to ensure the safety of the space industry and those living around spaceports; but, are they adequate? Perhaps the commercial space industry can turn to the commercial aviation industry to help answer that question. Throughout its history, the aviation industry has dealt with lessons learned from mishaps due to failures in understanding the significance of weather impacts on operations. Using lessons from the aviation industry, the commercial space industry can preempt such accidents and maintain viability as an industry. Using Lanicci's Strategic Planning Model, this study identified the weather needs of the commercial space industry by conducting three gap analyses. First, a comparative analysis was done between laws and regulations in commercial aviation and those in the commercial space industry pertaining to meteorological support, finding a "legislative gap" between the two industries, as no legal guarantee is in place to ensure weather products remain available to the commercial space industry. A second analysis was conducted between the meteorological services provided for the commercial aviation industry and commercial space industry, finding a gap at facilities not located at an established launch facility or airport. At such facilities, many weather observational technologies would not be present, and would need to be purchased by the company operating the spaceport facility. A third analysis was conducted between the meteorological products and regulations that are currently in existence, and those needed for safe operations within the commercial space industry, finding gaps in predicting lightning, electric field charge, and space weather. Recommendations to address these deficiencies have

  8. Requirements for nurse supervisor training: A qualitative content analysis.

    Science.gov (United States)

    Dehghani, Khadijeh; Nasiriani, Khadijeh; Salimi, Tahere

    2016-01-01

    Supervisors should have certain characteristics and adequate preparation for their roles. Yet, there are no well-educated experts knowing about the supervisor's role and responsibilities and how to train them. So, this research was conducted with the purpose of finding the factors affecting nursing supervisor training. This research is an inductive content analysis. Participants were 25 in number, consisting of nurses and supervisors in Shahid Sadoughi University hospitals. The participants were chosen by a purposive sampling method. Data collection was done by semi-structured interviews and reviewing documents. Data were analyzed using conventional content analysis. Findings included two main themes: Firstly, establishment of a supervisory infrastructure that includes "making the appointments and retention of supervisors, clarifying the duties and authority of supervisor, developing supervisory culture, specializing supervision, and conducting practice-based training" and secondly, comprehensive supervisory competencies that include "acquiring scientific, managing, communicative, professional, ethical, pedagogical, and supporting adequacy." Clinical supervisor has a major role in ensuring the quality of nursing care. This leads to improvements in patient care and nurses' personal and professional development. So, it is necessary that for effective supervision in nursing, first an infrastructure is provided for supervision and then the comprehensive competency of a supervisor is enhanced to apply effective supervision.

  9. A GENERALIZATION OF TRADITIONAL KANO MODEL FOR CUSTOMER REQUIREMENTS ANALYSIS

    Directory of Open Access Journals (Sweden)

    Renáta Turisová

    2015-07-01

    Full Text Available Purpose: The theory of attractiveness determines the relationship between the technically achieved and customer perceived quality of product attributes. The most frequently used approach in the theory of attractiveness is the implementation of Kano‘s model. There exist a lot of generalizations of that model which take into consideration various aspects and approaches focused on understanding the customer preferences and identification of his priorities for a selling  product. The aim of this article is to outline another possible generalization of Kano‘s model.Methodology/Approach: The traditional Kano’s model captures the nonlinear relationship between reached attributes of quality and customer requirements. The individual attributes of quality are divided into three main categories: must-be, one-dimensional, attractive quality and into two side categories: indifferent and reverse quality. The well selling product has to contain the must-be attribute. It should contain as many one-dimensional attributes as possible. If there are also supplementary attractive attributes, it means that attractiveness of the entire product, from the viewpoint of the customer, nonlinearly sharply rises what has a direct positive impact on a decision of potential customer when purchasing the product. In this article, we show that inclusion of individual quality attributes of a product to the mentioned categories depends, among other things, also on costs on life cycle of the product, respectively on a price of the product on the market.Findings: In practice, we are often encountering the inclusion of products into different price categories: lower, middle and upper class. For a certain type of products the category is either directly declared by a producer (especially in automotive industry, or is determined by a customer by means of assessment of available market prices. To each of those groups of a products different customer expectations can be assigned

  10. Analysis of User Requirements in Interactive 3D Video Systems

    Directory of Open Access Journals (Sweden)

    Haiyue Yuan

    2012-01-01

    Full Text Available The recent development of three dimensional (3D display technologies has resulted in a proliferation of 3D video production and broadcasting, attracting a lot of research into capture, compression and delivery of stereoscopic content. However, the predominant design practice of interactions with 3D video content has failed to address its differences and possibilities in comparison to the existing 2D video interactions. This paper presents a study of user requirements related to interaction with the stereoscopic 3D video. The study suggests that the change of view, zoom in/out, dynamic video browsing, and textual information are the most relevant interactions with stereoscopic 3D video. In addition, we identified a strong demand for object selection that resulted in a follow-up study of user preferences in 3D selection using virtual-hand and ray-casting metaphors. These results indicate that interaction modality affects users’ decision of object selection in terms of chosen location in 3D, while user attitudes do not have significant impact. Furthermore, the ray-casting-based interaction modality using Wiimote can outperform the volume-based interaction modality using mouse and keyboard for object positioning accuracy.

  11. Energy requirement and economic analysis of citrus production in Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Ozkan, Burhan E-mail: bozkan@akdeniz.edu.tr; Akcaoz, Handan; Karadeniz, Feyza

    2004-07-01

    The aim of this research was to examine the energy requirements of the inputs and output in citrus production in the Antalya province of Turkey. Data for the production of citrus fruits (orange, lemon and mandarin) were collected from 105 citrus farms by using a face to face questionnaire method. The research results revealed that lemon production was the most energy intensive among the three fruits investigated. The energy input of chemical fertilizer (49.68%), mainly nitrogen, has the biggest share in the total energy inputs followed by Diesel (30.79%). The lemon production consumed a total of 62 977.87 MJ/ha followed by orange and mandarin with 60 949.69 and 48 838.17 MJ/ha, respectively. The energy ratios for orange, mandarin and lemon were estimated to be 1.25, 1.17 and 1.06, respectively. On average, the non-renewable form of energy input was 95.90% of the total energy input used in citrus production compared to only 3.74% for the renewable form. The benefit-cost ratio was the highest in orange production (2.37) followed by lemon. The results indicate that orange production in the research area is most remunerative to growers compared to lemon and mandarin.

  12. Proposal for elicitation and analysis of environmental requirements into the construction design process: a case study

    Directory of Open Access Journals (Sweden)

    Camila Pegoraro

    2010-05-01

    Full Text Available Proposal: As new demands from sustainable development, environmental requirements arise as another challenge to design process management. It is already known that companies which design buildings are usually exposed to many managerial difficulties. Faced to the environmental demands, these companies require new facilities to align environmental requirements to the business goals and to include them properly in design process. This paper is based on a case study in a construction company, which was developed through interviews and document analysis. It is intended to present a procedure for the project environmental requirements elicitation, organization and analysis, which is based on the requirements engineering (ER concepts. As results it was concluded that the ER concepts are useful for the environmental requirements integration into the design process and that strategic planning should give directions for the effective environmental requirements adherence. Moreover, a procedure for environmental requirements modeling is proposed. Key-words: Design process, Requirements management, Environmental requirements, Construction

  13. Requirements Analysis Study for Master Pump Shutdown System Project Development Specification [SEC 1 and 2

    International Nuclear Information System (INIS)

    BEVINS, R.R.

    2000-01-01

    This document has been updated during the definitive design portion of the first phase of the W-314 Project to capture additional software requirements and is planned to be updated during the second phase of the W-314 Project to cover the second phase of the Project's scope. The objective is to provide requirement traceability by recording the analysis/basis for the functional descriptions of the master pump shutdown system. This document identifies the sources of the requirements and/or how these were derived. Each requirement is validated either by quoting the source or an analysis process involving the required functionality, performance characteristics, operations input or engineering judgment

  14. Using task analysis to improve the requirements elicitation in health information system.

    Science.gov (United States)

    Teixeira, Leonor; Ferreira, Carlos; Santos, Beatriz Sousa

    2007-01-01

    This paper describes the application of task analysis within the design process of a Web-based information system for managing clinical information in hemophilia care, in order to improve the requirements elicitation and, consequently, to validate the domain model obtained in a previous phase of the design process (system analysis). The use of task analysis in this case proved to be a practical and efficient way to improve the requirements engineering process by involving users in the design process.

  15. An effective technique for the software requirements analysis of NPP safety-critical systems, based on software inspection, requirements traceability, and formal specification

    International Nuclear Information System (INIS)

    Koo, Seo Ryong; Seong, Poong Hyun; Yoo, Junbeom; Cha, Sung Deok; Yoo, Yeong Jae

    2005-01-01

    A thorough requirements analysis is indispensable for developing and implementing safety-critical software systems such as nuclear power plant (NPP) software systems because a single error in the requirements can generate serious software faults. However, it is very difficult to completely analyze system requirements. In this paper, an effective technique for the software requirements analysis is suggested. For requirements verification and validation (V and V) tasks, our technique uses software inspection, requirement traceability, and formal specification with structural decomposition. Software inspection and requirements traceability analysis are widely considered the most effective software V and V methods. Although formal methods are also considered an effective V and V activity, they are difficult to use properly in the nuclear fields as well as in other fields because of their mathematical nature. In this work, we propose an integrated environment (IE) approach for requirements, which is an integrated approach that enables easy inspection by combining requirement traceability and effective use of a formal method. The paper also introduces computer-aided tools for supporting IE approach for requirements. Called the nuclear software inspection support and requirements traceability (NuSISRT), the tool incorporates software inspection, requirement traceability, and formal specification capabilities. We designed the NuSISRT to partially automate software inspection and analysis of requirement traceability. In addition, for the formal specification and analysis, we used the formal requirements specification and analysis tool for nuclear engineering (NuSRS)

  16. Importance of Requirements Analysis & Traceability to Improve Software Quality and Reduce Cost and Risk

    Science.gov (United States)

    Kapoor, Manju M.; Mehta, Manju

    2010-01-01

    The goal of this paper is to emphasize the importance of developing complete and unambiguous requirements early in the project cycle (prior to Preliminary Design Phase). Having a complete set of requirements early in the project cycle allows sufficient time to generate a traceability matrix. Requirements traceability and analysis are the key elements in improving verification and validation process, and thus overall software quality. Traceability can be most beneficial when the system changes. If changes are made to high-level requirements it implies that low-level requirements need to be modified. Traceability ensures that requirements are appropriately and efficiently verified at various levels whereas analysis ensures that a rightly interpreted set of requirements is produced.

  17. Requirements Analysis Study for Master Pump Shutdown System Project Development Specification

    International Nuclear Information System (INIS)

    BEVINS, R.R.

    2000-01-01

    This study is a requirements document that presents analysis for the functional description for the master pump shutdown system. This document identifies the sources of the requirements and/or how these were derived. Each requirement is validated either by quoting the source or an analysis process involving the required functionality, performance characteristics, operations input or engineering judgment. The requirements in this study apply to the first phase of the W314 Project. This document has been updated during the definitive design portion of the first phase of the W314 Project to capture additional software requirements and is planned to be updated during the second phase of the W314 Project to cover the second phase of the project's scope

  18. Technical Requirements Analysis and Control Systems (TRACS) Initial Operating Capability (IOC) documentation

    Science.gov (United States)

    Hammond, Dana P.

    1991-01-01

    The Technical Requirements Analysis and Control Systems (TRACS) software package is described. TRACS offers supplemental tools for the analysis, control, and interchange of project requirements. This package provides the fundamental capability to analyze and control requirements, serves a focal point for project requirements, and integrates a system that supports efficient and consistent operations. TRACS uses relational data base technology (ORACLE) in a stand alone or in a distributed environment that can be used to coordinate the activities required to support a project through its entire life cycle. TRACS uses a set of keyword and mouse driven screens (HyperCard) which imposes adherence through a controlled user interface. The user interface provides an interactive capability to interrogate the data base and to display or print project requirement information. TRACS has a limited report capability, but can be extended with PostScript conventions.

  19. Software requirements specification for the program analysis and control system risk management module

    International Nuclear Information System (INIS)

    SCHAEFER, J.C.

    1999-01-01

    TWR Program Analysis and Control System Risk Module is used to facilitate specific data processes surrounding the Risk Management program of the Tank Waste Retrieval environment. This document contains the Risk Management system requirements of the database system

  20. User requirements analysis for use of mobile phones in learning and teaching

    OpenAIRE

    Arreymbi, Johnnes; Draganova, Chrisina

    2008-01-01

    In this study we investigate the requirements of students and lecturers from the School of Computing and Technology at University of East London for a system that uses mobile phones to support learning and teaching. We consider in particular those requirements that are related to supporting classroom interaction, student group work and module administration. We offer an analysis model of these requirements that can be further used for the design and implementation of the system.

  1. Hazard Analysis of Software Requirements Specification for Process Module of FPGA-based Controllers in NPP

    Energy Technology Data Exchange (ETDEWEB)

    Jung; Sejin; Kim, Eui-Sub; Yoo, Junbeom [Konkuk University, Seoul (Korea, Republic of); Keum, Jong Yong; Lee, Jang-Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Software in PLC, FPGA which are used to develop I and C system also should be analyzed to hazards and risks before used. NUREG/CR-6430 proposes the method for performing software hazard analysis. It suggests analysis technique for software affected hazards and it reveals that software hazard analysis should be performed with the aspects of software life cycle such as requirements analysis, design, detailed design, implements. It also provides the guide phrases for applying software hazard analysis. HAZOP (Hazard and operability analysis) is one of the analysis technique which is introduced in NUREG/CR-6430 and it is useful technique to use guide phrases. HAZOP is sometimes used to analyze the safety of software. Analysis method of NUREG/CR-6430 had been used in Korea nuclear power plant software for PLC development. Appropriate guide phrases and analysis process are selected to apply efficiently and NUREG/CR-6430 provides applicable methods for software hazard analysis is identified in these researches. We perform software hazard analysis of FPGA software requirements specification with two approaches which are NUREG/CR-6430 and HAZOP with using general GW. We also perform the comparative analysis with them. NUREG/CR-6430 approach has several pros and cons comparing with the HAZOP with general guide words and approach. It is enough applicable to analyze the software requirements specification of FPGA.

  2. An Analysis of the Army Service Acquisition Review Requirements and the Perceived Effectiveness on Intended Improvements

    Science.gov (United States)

    2016-06-01

    Selection Evaluation Market Research Metrics Competition Acquisition Schedule Consolidation Recommendation As detailed in the Chapter IIB, OSD Policy...REQUIREMENTS AND THE PERCEIVED EFFECTIVENESS ON INTENDED IMPROVEMENTS June 2016 By: Roxanne Moss Michael Vukovich Megan Weidner Advisors...ANALYSIS OF THE ARMY SERVICE ACQUISITION REVIEW REQUIREMENTS AND THE PERCEIVED EFFECTIVENESS ON INTENDED IMPROVEMENTS 5. FUNDING NUMBERS 6. AUTHOR(S

  3. An Analysis of Skill Requirements for Operators of Amphibious Air Cushion Vehicles (ACVs).

    Science.gov (United States)

    McKnight, A. James; And Others

    This report describes the skills required in the operation of an amphibious air cushion vehicle (ACV) in Army tactical and logistic missions. The research involved analyzing ACV characteristics, operating requirements, environmental effects, and results of a simulation experiment. The analysis indicates that ACV operation is complicated by an…

  4. Spacelab user implementation assessment study. (Software requirements analysis). Volume 2: Technical report

    Science.gov (United States)

    1976-01-01

    The engineering analyses and evaluation studies conducted for the Software Requirements Analysis are discussed. Included are the development of the study data base, synthesis of implementation approaches for software required by both mandatory onboard computer services and command/control functions, and identification and implementation of software for ground processing activities.

  5. Software Safety Analysis of Digital Protection System Requirements Using a Qualitative Formal Method

    International Nuclear Information System (INIS)

    Lee, Jang-Soo; Kwon, Kee-Choon; Cha, Sung-Deok

    2004-01-01

    The safety analysis of requirements is a key problem area in the development of software for the digital protection systems of a nuclear power plant. When specifying requirements for software of the digital protection systems and conducting safety analysis, engineers find that requirements are often known only in qualitative terms and that existing fault-tree analysis techniques provide little guidance on formulating and evaluating potential failure modes. A framework for the requirements engineering process is proposed that consists of a qualitative method for requirements specification, called the qualitative formal method (QFM), and a safety analysis method for the requirements based on causality information, called the causal requirements safety analysis (CRSA). CRSA is a technique that qualitatively evaluates causal relationships between software faults and physical hazards. This technique, extending the qualitative formal method process and utilizing information captured in the state trajectory, provides specific guidelines on how to identify failure modes and the relationship among them. The QFM and CRSA processes are described using shutdown system 2 of the Wolsong nuclear power plants as the digital protection system example

  6. Maxwell-Faraday Stresses in Electromagnetic Fields and the Self-Force on a Uniformly Accelerating Point Charge

    Science.gov (United States)

    Rowland, D. R.

    2007-01-01

    The physical analysis of a uniformly accelerating point charge provides a rich problem to explore in advanced courses in electrodynamics and relativity since it brings together fundamental concepts in relation to electromagnetic radiation, Einstein's equivalence principle and the inertial mass of field energy in ways that reveal subtleties in each…

  7. Trade-Off Analysis between Concerns Based on Aspect-Oriented Requirements Engineering

    Science.gov (United States)

    Laurito, Abelyn Methanie R.; Takada, Shingo

    The identification of functional and non-functional concerns is an important activity during requirements analysis. However, there may be conflicts between the identified concerns, and they must be discovered and resolved through trade-off analysis. Aspect-Oriented Requirements Engineering (AORE) has trade-off analysis as one of its goals, but most AORE approaches do not actually offer support for trade-off analysis; they focus on describing concerns and generating their composition. This paper proposes an approach for trade-off analysis based on AORE using use cases and the Requirements Conflict Matrix (RCM) to represent compositions. RCM shows the positive or negative effect of non-functional concerns over use cases and other non-functional concerns. Our approach is implemented within a tool called E-UCEd (Extended Use Case Editor). We also show the results of evaluating our tool.

  8. Requirement analysis and architecture of data communication system for integral reactor

    International Nuclear Information System (INIS)

    Jeong, K. I.; Kwon, H. J.; Park, J. H.; Park, H. Y.; Koo, I. S.

    2005-05-01

    When digitalizing the Instrumentation and Control(I and C) systems in Nuclear Power Plants(NPP), a communication network is required for exchanging the digitalized data between I and C equipments in a NPP. A requirements analysis and an analysis of design elements and techniques are required for the design of a communication network. Through the requirements analysis of the code and regulation documents such as NUREG/CR-6082, section 7.9 of NUREG 0800 , IEEE Standard 7-4.3.2 and IEEE Standard 603, the extracted requirements can be used as a design basis and design concept for a detailed design of a communication network in the I and C system of an integral reactor. Design elements and techniques such as a physical topology, protocol transmission media and interconnection device should be considered for designing a communication network. Each design element and technique should be analyzed and evaluated as a portion of the integrated communication network design. In this report, the basic design requirements related to the design of communication network are investigated by using the code and regulation documents and an analysis of the design elements and techniques is performed. Based on these investigation and analysis, the overall architecture including the safety communication network and the non-safety communication network is proposed for an integral reactor

  9. Alternatives generation and analysis for phase I intermediate waste feed staging system design requirements

    Energy Technology Data Exchange (ETDEWEB)

    Britton, M.D.

    1996-10-02

    This document provides; a decision analysis summary; problem statement; constraints, requirements, and assumptions; decision criteria; intermediate waste feed staging system options and alternatives generation and screening; intermediate waste feed staging system design concepts; intermediate waste feed staging system alternative evaluation and analysis; and open issues and actions.

  10. Handbook of methods for risk-based analysis of technical specification requirements

    International Nuclear Information System (INIS)

    Samanta, P.K.; Vesely, W.E.

    1994-01-01

    Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements were based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while others may not be conducive to safety. Improvements in these requirements are facilitated by the availability of plant specific Probabilistic Safety Assessments (PSAs). The use of risk and reliability-based methods to improve TS requirements has gained wide interest because these methods can: Quantitatively evaluate the risk and justify changes based on objective risk arguments; Provide a defensible basis for these requirements for regulatory applications. The US NRC Office of Research is sponsoring research to develop systematic risk-based methods to improve various aspects of TS requirements. The handbook of methods, which is being prepared, summarizes such risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), defenses against common-cause failures, managing plant configurations, and scheduling maintenances. For each topic, the handbook summarizes methods of analysis and data needs, outlines the insights to be gained, lists additional references, and presents examples of evaluations

  11. Handbook of methods for risk-based analysis of Technical Specification requirements

    International Nuclear Information System (INIS)

    Samanta, P.K.; Vesely, W.E.

    1993-01-01

    Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements were based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while others may not be conducive to safety. Improvements in these requirements are facilitated by the availability of plant specific Probabilistic Safety Assessments (PSAs). The use of risk and reliability-based methods to improve TS requirements has gained wide interest because these methods can: quantitatively evaluate the risk impact and justify changes based on objective risk arguments. Provide a defensible basis for these requirements for regulatory applications. The United States Nuclear Regulatory Commission (USNRC) Office of Research is sponsoring research to develop systematic risk-based methods to improve various aspects of TS requirements. The handbook of methods, which is being prepared, summarizes such risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), defenses against common-cause failures, managing plant configurations, and scheduling maintenances. For each topic, the handbook summarizes methods of analysis and data needs, outlines the insights to be gained, lists additional references, and presents examples of evaluations

  12. Misconceptions regarding the cancellation of self-forces in the transverse equation of motion for an electron in a bunch

    International Nuclear Information System (INIS)

    Geloni, G.; Yurkov, M.V.

    2003-10-01

    As a consequence of motions driven by external forces, self-fields originate within an electron bunch, which are different from the static case. In the case of magnetic external forces acting on an ultrarelativistic beam, the longitudinal self-interactions are responsible for CSR (coherent synchrotron radiation)-related phenomena, which have been studied extensively. On the other hand, transverse self-interactions are present too. At the time being, several existing theoretical analysis of transverse dynamics rely on the so-called cancellation effect, which has been around for more than ten years. In this paper we explain why in our view such an effect is not of practical nor of theoretical importance. (orig.)

  13. Space station data system analysis/architecture study. Task 1: Functional requirements definition, DR-5. Appendix: Requirements data base

    Science.gov (United States)

    1985-01-01

    Appendix A contains data that characterize the system functions in sufficient depth as to determine the requirements for the Space Station Data System (SSDS). This data is in the form of: (1) top down traceability report; (2) bottom up traceability report; (3) requirements data sheets; and (4) cross index of requirements paragraphs of the source documents and the requirements numbers. A data base users guide is included that interested parties can use to access the requirements data base and get up to date information about the functions.

  14. Reuse-centric Requirements Analysis with Task Models, Scenarios, and Critical Parameters

    Directory of Open Access Journals (Sweden)

    Cyril Montabert

    2007-02-01

    Full Text Available This paper outlines a requirements-analysis process that unites task models, scenarios, and critical parameters to exploit and generate reusable knowledge at the requirements phase. Through the deployment of a critical-parameter-based approach to task modeling, the process yields the establishment of an integrative and formalized model issued from scenarios that can be used for requirements characterization. Furthermore, not only can this entity serve as interface to a knowledge repository relying on a critical-parameter-based taxonomy to support reuse but its characterization in terms of critical parameters also allows the model to constitute a broader reuse solution. We discuss our vision for a user-centric and reuse-centric approach to requirements analysis, present previous efforts implicated with this line of work, and state the revisions brought to extend the reuse potential and effectiveness of a previous iteration of a requirements tool implementing such process. Finally, the paper describes the sequence and nature of the activities involved with the conduct of our proposed requirements-analysis technique, concluding by previewing ongoing work in the field that will explore the feasibility for designers to use our approach.

  15. Space Station data system analysis/architecture study. Task 1: Functional requirements definition, DR-5

    Science.gov (United States)

    1985-01-01

    The initial task in the Space Station Data System (SSDS) Analysis/Architecture Study is the definition of the functional and key performance requirements for the SSDS. The SSDS is the set of hardware and software, both on the ground and in space, that provides the basic data management services for Space Station customers and systems. The primary purpose of the requirements development activity was to provide a coordinated, documented requirements set as a basis for the system definition of the SSDS and for other subsequent study activities. These requirements should also prove useful to other Space Station activities in that they provide an indication of the scope of the information services and systems that will be needed in the Space Station program. The major results of the requirements development task are as follows: (1) identification of a conceptual topology and architecture for the end-to-end Space Station Information Systems (SSIS); (2) development of a complete set of functional requirements and design drivers for the SSIS; (3) development of functional requirements and key performance requirements for the Space Station Data System (SSDS); and (4) definition of an operating concept for the SSIS. The operating concept was developed both from a Space Station payload customer and operator perspective in order to allow a requirements practicality assessment.

  16. Surveillance Analysis Computer System (SACS): Software requirements specification (SRS). Revision 2

    International Nuclear Information System (INIS)

    Glasscock, J.A.

    1995-01-01

    This document is the primary document establishing requirements for the Surveillance Analysis Computer System (SACS) database, an Impact Level 3Q system. SACS stores information on tank temperatures, surface levels, and interstitial liquid levels. This information is retrieved by the customer through a PC-based interface and is then available to a number of other software tools. The software requirements specification (SRS) describes the system requirements for the SACS Project, and follows the Standard Engineering Practices (WHC-CM-6-1), Software Practices (WHC-CM-3-10) and Quality Assurance (WHC-CM-4-2, QR 19.0) policies

  17. Current Capabilities, Requirements and a Proposed Strategy for Interdependency Analysis in the UK

    Science.gov (United States)

    Bloomfield, Robin; Chozos, Nick; Salako, Kizito

    The UK government recently commissioned a research study to identify the state-of-the-art in Critical Infrastructure modelling and analysis, and the government/industry requirements for such tools and services. This study (Cetifs) concluded with a strategy aiming to bridge the gaps between the capabilities and requirements, which would establish interdependency analysis as a commercially viable service in the near future. This paper presents the findings of this study that was carried out by CSR, City University London, Adelard LLP, a safety/security consultancy and Cranfield University, defense academy of the UK.

  18. Problems about the analysis of technical requirements compliance in NPPPCI systems

    International Nuclear Information System (INIS)

    Perello, M.

    1978-01-01

    The display of the problems that the analysis of the technical requirements compliance bring along is presented. In the project of nuclear power plants, above all, the influence of national and international standards in the analysis of the adjustment of requirements established by the governments of nuclear safety of the different countries. In the oral presentation greater emphasis is made on the difficulties that the PSAR evaluation brings when the lack of technical standards in the owner country makes necessary the use of other countries rules. (author)

  19. A comparative multivariate analysis of household energy requirements in Australia, Brazil, Denmark, India and Japan

    Energy Technology Data Exchange (ETDEWEB)

    Lenzen, M. [University of Sydney (Australia). School of Physics; Wier, M. [Royal Veterinary and Agricultural University, Copenhagen (Denmark). Danish Research Institute of Food Economics; Cohen, C. [Universidade Federal Fluminense, Rio de Janeiro (Brazil). Faculdade de Economia; Hayami, Hitoshi [Keio University, Tokyo (Japan). Keio Economic Observatory; Pachauri, S. [Swiss Federal Institutes of Technology, Zurich (Switzerland). Centre for Energy Policy and Economics; Schaeffer, R. [Universidade Federal do Rio de Janeiro (Brazil). COPPE

    2006-03-01

    In this paper, we appraise sustainable household consumption from a global perspective. Using per capita energy requirements as an indicator of environmental pressure, we focus on the importance of income growth in a cross-country analysis. Our analysis is supported by a detailed within-country analysis encompassing five countries, in which we assess the importance of various socioeconomic-demographic characteristics of household energy requirements. We bring together family expenditure survey data, input-output tables, and energy statistics in a multivariate analysis. Instead of a uniform Kuznet's curve, we find that the effect of increasing income varies considerably across countries, even when controlling for socioeconomic and demographic variations. The latter variables show similar influences, but differing importance across countries. (author)

  20. Gamified Cognitive Control Training for Remitted Depressed Individuals: User Requirements Analysis.

    Science.gov (United States)

    Vervaeke, Jasmien; Van Looy, Jan; Hoorelbeke, Kristof; Baeken, Chris; Koster, Ernst Hw

    2018-04-05

    The high incidence and relapse rates of major depressive disorder demand novel treatment options. Standard treatments (psychotherapy, medication) usually do not target cognitive control impairments, although these seem to play a crucial role in achieving stable remission. The urgent need for treatment combined with poor availability of adequate psychological interventions has instigated a shift toward internet interventions. Numerous computerized programs have been developed that can be presented online and offline. However, their uptake and adherence are oftentimes low. The aim of this study was to perform a user requirements analysis for an internet-based training targeting cognitive control. This training focuses on ameliorating cognitive control impairments, as these are still present during remission and can be a risk factor for relapse. To facilitate uptake of and adherence to this intervention, a qualitative user requirements analysis was conducted to map mandatory and desirable requirements. We conducted a user requirements analysis through a focus group with 5 remitted depressed individuals and individual interviews with 6 mental health care professionals. All qualitative data were transcribed and examined using a thematic analytic approach. Results showed mandatory requirements for the remitted sample in terms of training configuration, technological and personal factors, and desirable requirements regarding knowledge and enjoyment. Furthermore, knowledge and therapeutic benefits were key requirements for therapists. The identified requirements provide useful information to be integrated in interventions targeting cognitive control in depression. ©Jasmien Vervaeke, Jan Van Looy, Kristof Hoorelbeke, Chris Baeken, Ernst HW Koster. Originally published in JMIR Serious Games (http://games.jmir.org), 05.04.2018.

  1. Requirements for a cleanable steel HEPA filter derived from a systems analysis

    International Nuclear Information System (INIS)

    Bergman, W.

    1996-06-01

    A systems analysis was conducted to determine customer requirements for a cleanable high efficiency particulate air (HEPA) filter in DOE Environmental Management (EM) facilities. The three principal drivers for cleanable steel HEPA are large cost savings, improved filter reliability, and new regulations; they produce a strong incentive to DOE customers to use cleanable steel HEPA filters. Input for customer requirements were obtained from field trips to EM sites and from discussions. Most existing applications require that cleanable steel HEPA filters meet size/performance requirements of standard glass HEPA filters; applications in new facilities can relax size/weight/pressure drop requirements on a case-by-case basis. We then obtained input from commercial firms on availability of cleanable steel HEPA filters. Systems analysis then showed that currently available technology was only able to meet customer needs in a limited number of cases. Further development is needed to meet requirements of EM customers. For cleanable steel HEPA to be retrofitted into existing systems, pressure drop and weight must be reduced. Pressure drop can be reduced by developing steel fiber media from 0.5 μm dia steel fibers. Weight can be reduced by packaging the steel fiber media in one of the standard HEPA configurations. Although most applications will be able to use standard 304 or 316L alloys, an acid resistant alloy such as Hastelloy or Inconel will be needed for incinerator and other thermal processes

  2. Identifying Skill Requirements for GIS Positions: A Content Analysis of Job Advertisements

    Science.gov (United States)

    Hong, Jung Eun

    2016-01-01

    This study identifies the skill requirements for geographic information system (GIS) positions, including GIS analysts, programmers/developers/engineers, specialists, and technicians, through a content analysis of 946 GIS job advertisements from 2007-2014. The results indicated that GIS job applicants need to possess high levels of GIS analysis…

  3. A framework for characterizing usability requirements elicitation and analysis methodologies (UREAM)

    NARCIS (Netherlands)

    Trienekens, J.J.M.; Kusters, R.J.; Mannaert, H.

    2012-01-01

    Dedicated methodologies for the elicitation and analysis of usability requirements have been proposed in literature, usually developed by usability experts. The usability of these approaches by non-expert software engineers is not obvious. In this paper, the objective is to support developers and

  4. OpenICE medical device interoperability platform overview and requirement analysis.

    Science.gov (United States)

    Arney, David; Plourde, Jeffrey; Goldman, Julian M

    2018-02-23

    We give an overview of OpenICE, an open source implementation of the ASTM standard F2761 for the Integrated Clinical Environment (ICE) that leverages medical device interoperability, together with an analysis of the clinical and non-functional requirements and community process that inspired its design.

  5. Decision Support System Requirements Definition for Human Extravehicular Activity Based on Cognitive Work Analysis.

    Science.gov (United States)

    Miller, Matthew James; McGuire, Kerry M; Feigh, Karen M

    2017-06-01

    The design and adoption of decision support systems within complex work domains is a challenge for cognitive systems engineering (CSE) practitioners, particularly at the onset of project development. This article presents an example of applying CSE techniques to derive design requirements compatible with traditional systems engineering to guide decision support system development. Specifically, it demonstrates the requirements derivation process based on cognitive work analysis for a subset of human spaceflight operations known as extravehicular activity . The results are presented in two phases. First, a work domain analysis revealed a comprehensive set of work functions and constraints that exist in the extravehicular activity work domain. Second, a control task analysis was performed on a subset of the work functions identified by the work domain analysis to articulate the translation of subject matter states of knowledge to high-level decision support system requirements. This work emphasizes an incremental requirements specification process as a critical component of CSE analyses to better situate CSE perspectives within the early phases of traditional systems engineering design.

  6. Network and system diagrams revisited: Satisfying CEA requirements for causality analysis

    International Nuclear Information System (INIS)

    Perdicoulis, Anastassios; Piper, Jake

    2008-01-01

    Published guidelines for Cumulative Effects Assessment (CEA) have called for the identification of cause-and-effect relationships, or causality, challenging researchers to identify methods that can possibly meet CEA's specific requirements. Together with an outline of these requirements from CEA key literature, the various definitions of cumulative effects point to the direction of a method for causality analysis that is visually-oriented and qualitative. This article consequently revisits network and system diagrams, resolves their reported shortcomings, and extends their capabilities with causal loop diagramming methodology. The application of the resulting composite causality analysis method to three Environmental Impact Assessment (EIA) case studies appears to satisfy the specific requirements of CEA regarding causality. Three 'moments' are envisaged for the use of the proposed method: during the scoping stage, during the assessment process, and during the stakeholder participation process

  7. Analysis of NEPA/CEQ requirements with respect to nuclear materials transportation

    International Nuclear Information System (INIS)

    Ross, K.E.L.; Welles, B.W.; Pellettieri, M.W.

    1983-01-01

    This paper examines the responsibility of federal agencies concerned with nuclear materials transportation decisions that come within the scope of the National Environmental Policy Act of 1969 (NEPA) and the requirements established by the Council on Environmental Quality (CEQ). Two of the case histories presented in this paper focus on actions taken by the Nuclear Regulatory Commission (NRC) and the Department of Transportation (DOT). A third case history, in which the limits of environmental impact are judicially redefined, presents an analysis of NEPA application in an NRC licensing action. The decision by the US Supreme Court (April 19, 1983) disallowed psychological stress as a factor to be required in environmental analysis of federal actions. The review by the Supreme Court of environmental impact considerations required under NEPA is clearly transferable to federal actions involving transportation of nuclear materials. Of interest in these examples is the application of NEPA requirements for worst-case analysis and the employment of the rule of reason by a federal agency to determine the limits of its NEPA obligations

  8. User Requirements Analysis For Digital Library Application Using Quality Function Deployment.

    Science.gov (United States)

    Wulandari, Lily; Sularto, Lana; Yusnitasari, Tristyanti; Ikasari, Diana

    2017-03-01

    This study attemp to build Smart Digital Library to be used by the wider community wherever they are. The system is built in the form of Smart Digital Library portal which uses semantic similarity method (Semantic Similarity) to search journals, articles or books by title or author name. This method is also used to determine the recommended books to be read by visitors of Smart Digital Library based on testimony from a previous reader automatically. Steps being taken in the development of Smart Digital Library system is the analysis phase, design phase, testing and implementation phase. At this stage of the analysis using WebQual for the preparation of the instruments to be distributed to the respondents and the data obtained from the respondents will be processed using Quality Function Deployment. In the analysis phase has the purpose of identifying consumer needs and technical requirements. The analysis was performed to a digital library on the web digital library Gunadarma University, Bogor Institute of Agriculture, University of Indonesia, etc. The questionnaire was distributed to 200 respondents. The research methodology begins with the collection of user requirements and analyse it using QFD. Application design is funded by the government through a program of Featured Universities Research by the Directorate General of Higher Education (DIKTI). Conclusions from this research are identified which include the Consumer Requirements of digital library application. The elements of the consumers requirements consists of 13 elements and 25 elements of Engineering Characteristics digital library requirements. Therefore the design of digital library applications that will be built, is designed according to the findings by eliminating features that are not needed by restaurant based on QFD House of Quality.

  9. Empirical Requirements Analysis for Mars Surface Operations Using the Flashline Mars Arctic Research Station

    Science.gov (United States)

    Clancey, William J.; Lee, Pascal; Sierhuis, Maarten; Norvig, Peter (Technical Monitor)

    2001-01-01

    Living and working on Mars will require model-based computer systems for maintaining and controlling complex life support, communication, transportation, and power systems. This technology must work properly on the first three-year mission, augmenting human autonomy, without adding-yet more complexity to be diagnosed and repaired. One design method is to work with scientists in analog (mars-like) setting to understand how they prefer to work, what constrains will be imposed by the Mars environment, and how to ameliorate difficulties. We describe how we are using empirical requirements analysis to prototype model-based tools at a research station in the High Canadian Arctic.

  10. Comparative analysis of quality assurance requirements for selected LMFBR components of classes 1, 2 and 3

    International Nuclear Information System (INIS)

    Kleinert, K.P.

    1992-01-01

    The study analyses and compares German, French, British and Italian practices and procedures applied for various LMFBR projects both related to the quality assurance system and related to the particular type of class of component:Class 1: primary reactor vessel; Class 2: Secondary sodium pump; Class 3: Primary cold trap. Various areas of analysis and comparison were selected to identify the underlying concepts of grading of requirements and measures, to identify the similarities and differences, and to give recommendations for further actions concerning quality assurance requirements 60 refs., 21 tabs., 6 figs

  11. System Requirements Analysis for a Computer-based Procedure in a Research Reactor Facility

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jaek Wan; Jang, Gwi Sook; Seo, Sang Moon; Shin, Sung Ki [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    This can address many of the routine problems related to human error in the use of conventional, hard-copy operating procedures. An operating supporting system is also required in a research reactor. A well-made CBP can address the staffing issues of a research reactor and reduce the human errors by minimizing the operator's routine tasks. A CBP for a research reactor has not been proposed yet. Also, CBPs developed for nuclear power plants have powerful and various technical functions to cover complicated plant operation situations. However, many of the functions may not be required for a research reactor. Thus, it is not reasonable to apply the CBP to a research reactor directly. Also, customizing of the CBP is not cost-effective. Therefore, a compact CBP should be developed for a research reactor. This paper introduces high level requirements derived by the system requirements analysis activity as the first stage of system implementation. Operation support tools are under consideration for application to research reactors. In particular, as a full digitalization of the main control room, application of a computer-based procedure system has been required as a part of man-machine interface system because it makes an impact on the operating staffing and human errors of a research reactor. To establish computer-based system requirements for a research reactor, this paper addressed international standards and previous practices on nuclear plants.

  12. Data Quality Objectives for Regulatory Requirements for Hazardous and Radioactive Air Emissions Sampling and Analysis

    International Nuclear Information System (INIS)

    MULKEY, C.H.

    1999-01-01

    This document describes the results of the data quality objective (DQO) process undertaken to define data needs for state and federal requirements associated with toxic, hazardous, and/or radiological air emissions under the jurisdiction of the River Protection Project (RPP). Hereafter, this document is referred to as the Air DQO. The primary drivers for characterization under this DQO are the regulatory requirements pursuant to Washington State regulations, that may require sampling and analysis. The federal regulations concerning air emissions are incorporated into the Washington State regulations. Data needs exist for nonradioactive and radioactive waste constituents and characteristics as identified through the DQO process described in this document. The purpose is to identify current data needs for complying with regulatory drivers for the measurement of air emissions from RPP facilities in support of air permitting. These drivers include best management practices; similar analyses may have more than one regulatory driver. This document should not be used for determining overall compliance with regulations because the regulations are in constant change, and this document may not reflect the latest regulatory requirements. Regulatory requirements are also expected to change as various permits are issued. Data needs require samples for both radionuclides and nonradionuclide analytes of air emissions from tanks and stored waste containers. The collection of data is to support environmental permitting and compliance, not for health and safety issues

  13. Probabilistic safety analysis of DC power supply requirements for nuclear power plants. Technical report

    International Nuclear Information System (INIS)

    Baranowsky, P.W.; Kolaczkowski, A.M.; Fedele, M.A.

    1981-04-01

    A probabilistic safety assessment was performed as part of the Nuclear Regulatory Commission generic safety task A-30, Adequacy of Safety Related DC Power Supplies. Event and fault tree analysis techniques were used to determine the relative contribution of DC power related accident sequences to the total core damage probability due to shutdown cooling failures. It was found that a potentially large DC power contribution could be substantially reduced by augmenting the minimum design and operational requirements. Recommendations included (1) requiring DC power divisional independence, (2) improved test, maintenance, and surveillance, and (3) requiring core cooling capability be maintained following the loss of one DC power bus and a single failure in another system

  14. Architectural and Algorithmic Requirements for a Next-Generation System Analysis Code

    Energy Technology Data Exchange (ETDEWEB)

    V.A. Mousseau

    2010-05-01

    This document presents high-level architectural and system requirements for a next-generation system analysis code (NGSAC) to support reactor safety decision-making by plant operators and others, especially in the context of light water reactor plant life extension. The capabilities of NGSAC will be different from those of current-generation codes, not only because computers have evolved significantly in the generations since the current paradigm was first implemented, but because the decision-making processes that need the support of next-generation codes are very different from the decision-making processes that drove the licensing and design of the current fleet of commercial nuclear power reactors. The implications of these newer decision-making processes for NGSAC requirements are discussed, and resulting top-level goals for the NGSAC are formulated. From these goals, the general architectural and system requirements for the NGSAC are derived.

  15. Quality system of the Chemical Analysis Laboratory to fulfill the requirements with Certification Organizations

    International Nuclear Information System (INIS)

    Merlo S, L.; Rodriguez L, R.; Cota S, G.

    1996-01-01

    In the present work was described the Quality System established in the Chemical Analysis Department to fulfill with the Organization requirements, personnel, measurement equipment, calibration, working procedures, etc. to get official acknowledgment by the National Assurance System for Testing laboratories, dependent of the General Standards Direction. There are described the available resources, the performance and control of each of one principal points of the system. (Author)

  16. Analysis of waste treatment requirements for DOE mixed wastes: Technical basis

    International Nuclear Information System (INIS)

    1995-02-01

    The risks and costs of managing DOE wastes are a direct function of the total quantities of 3wastes that are handled at each step of the management process. As part of the analysis of the management of DOE low-level mixed wastes (LLMW), a reference scheme has been developed for the treatment of these wastes to meet EPA criteria. The treatment analysis in a limited form was also applied to one option for treatment of transuranic wastes. The treatment requirements in all cases analyzed are based on a reference flowsheet which provides high level treatment trains for all LLMW. This report explains the background and basis for that treatment scheme. Reference waste stream chemical compositions and physical properties including densities were established for each stream in the data base. These compositions are used to define the expected behavior for wastes as they pass through the treatment train. Each EPA RCRA waste code was reviewed, the properties, chemical composition, or characteristics which are of importance to waste behavior in treatment were designated. Properties that dictate treatment requirements were then used to develop the treatment trains and identify the unit operations that would be included in these trains. A table was prepared showing a correlation of the waste physical matrix and the waste treatment requirements as a guide to the treatment analysis. The analysis of waste treatment loads is done by assigning wastes to treatment steps which would achieve RCRA compliant treatment. These correlation's allow one to examine the treatment requirements in a condensed manner and to see that all wastes and contaminant sets are fully considered

  17. An Analysis of Testing Requirements for Fluoride Salt Cooled High Temperature Reactor Components

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [ORNL; Cetiner, Sacit M [ORNL; Flanagan, George F [ORNL; Peretz, Fred J [ORNL; Yoder Jr, Graydon L [ORNL

    2009-11-01

    This report provides guidance on the component testing necessary during the next phase of fluoride salt-cooled high temperature reactor (FHR) development. In particular, the report identifies and describes the reactor component performance and reliability requirements, provides an overview of what information is necessary to provide assurance that components will adequately achieve the requirements, and then provides guidance on how the required performance information can efficiently be obtained. The report includes a system description of a representative test scale FHR reactor. The reactor parameters presented in this report should only be considered as placeholder values until an FHR test scale reactor design is completed. The report focus is bounded at the interface between and the reactor primary coolant salt and the fuel and the gas supply and return to the Brayton cycle power conversion system. The analysis is limited to component level testing and does not address system level testing issues. Further, the report is oriented as a bottom-up testing requirements analysis as opposed to a having a top-down facility description focus.

  18. Data Quality Objectives for Regulatory Requirements for Hazardous and Radioactive Air Emissions Sampling and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    MULKEY, C.H.

    1999-07-06

    This document describes the results of the data quality objective (DQO) process undertaken to define data needs for state and federal requirements associated with toxic, hazardous, and/or radiological air emissions under the jurisdiction of the River Protection Project (RPP). Hereafter, this document is referred to as the Air DQO. The primary drivers for characterization under this DQO are the regulatory requirements pursuant to Washington State regulations, that may require sampling and analysis. The federal regulations concerning air emissions are incorporated into the Washington State regulations. Data needs exist for nonradioactive and radioactive waste constituents and characteristics as identified through the DQO process described in this document. The purpose is to identify current data needs for complying with regulatory drivers for the measurement of air emissions from RPP facilities in support of air permitting. These drivers include best management practices; similar analyses may have more than one regulatory driver. This document should not be used for determining overall compliance with regulations because the regulations are in constant change, and this document may not reflect the latest regulatory requirements. Regulatory requirements are also expected to change as various permits are issued. Data needs require samples for both radionuclides and nonradionuclide analytes of air emissions from tanks and stored waste containers. The collection of data is to support environmental permitting and compliance, not for health and safety issues. This document does not address health or safety regulations or requirements (those of the Occupational Safety and Health Administration or the National Institute of Occupational Safety and Health) or continuous emission monitoring systems. This DQO is applicable to all equipment, facilities, and operations under the jurisdiction of RPP that emit or have the potential to emit regulated air pollutants.

  19. Data Quality Objectives for Regulatory Requirements for Hazardous and Radioactive Air Emissions Sampling and Analysis

    International Nuclear Information System (INIS)

    MULKEY, C.H.

    1999-01-01

    This document describes the results of the data quality objective (DQO) process undertaken to define data needs for state and federal requirements associated with toxic, hazardous, and/or radiological air emissions under the jurisdiction of the River Protection Project (RPP). Hereafter, this document is referred to as the Air DQO. The primary drivers for characterization under this DQO are the regulatory requirements pursuant to Washington State regulations, that may require sampling and analysis. The federal regulations concerning air emissions are incorporated into the Washington State regulations. Data needs exist for nonradioactive and radioactive waste constituents and characteristics as identified through the DQO process described in this document. The purpose is to identify current data needs for complying with regulatory drivers for the measurement of air emissions from RPP facilities in support of air permitting. These drivers include best management practices; similar analyses may have more than one regulatory driver. This document should not be used for determining overall compliance with regulations because the regulations are in constant change, and this document may not reflect the latest regulatory requirements. Regulatory requirements are also expected to change as various permits are issued. Data needs require samples for both radionuclides and nonradionuclide analytes of air emissions from tanks and stored waste containers. The collection of data is to support environmental permitting and compliance, not for health and safety issues. This document does not address health or safety regulations or requirements (those of the Occupational Safety and Health Administration or the National Institute of Occupational Safety and Health) or continuous emission monitoring systems. This DQO is applicable to all equipment, facilities, and operations under the jurisdiction of RPP that emit or have the potential to emit regulated air pollutants

  20. Data Quality Objectives for Regulatory Requirements for Hazardous and Radioactive Air Emissions Sampling and Analysis; FINAL

    International Nuclear Information System (INIS)

    MULKEY, C.H.

    1999-01-01

    This document describes the results of the data quality objective (DQO) process undertaken to define data needs for state and federal requirements associated with toxic, hazardous, and/or radiological air emissions under the jurisdiction of the River Protection Project (RPP). Hereafter, this document is referred to as the Air DQO. The primary drivers for characterization under this DQO are the regulatory requirements pursuant to Washington State regulations, that may require sampling and analysis. The federal regulations concerning air emissions are incorporated into the Washington State regulations. Data needs exist for nonradioactive and radioactive waste constituents and characteristics as identified through the DQO process described in this document. The purpose is to identify current data needs for complying with regulatory drivers for the measurement of air emissions from RPP facilities in support of air permitting. These drivers include best management practices; similar analyses may have more than one regulatory driver. This document should not be used for determining overall compliance with regulations because the regulations are in constant change, and this document may not reflect the latest regulatory requirements. Regulatory requirements are also expected to change as various permits are issued. Data needs require samples for both radionuclides and nonradionuclide analytes of air emissions from tanks and stored waste containers. The collection of data is to support environmental permitting and compliance, not for health and safety issues. This document does not address health or safety regulations or requirements (those of the Occupational Safety and Health Administration or the National Institute of Occupational Safety and Health) or continuous emission monitoring systems. This DQO is applicable to all equipment, facilities, and operations under the jurisdiction of RPP that emit or have the potential to emit regulated air pollutants

  1. ANALYSIS OF REQUIREMENTS APPLICABLE TO THE PRICING SYSTEM IN THE CONSTRUCTION INDUSTRY

    Directory of Open Access Journals (Sweden)

    Lyapin Anton Valer'evich

    2012-10-01

    Full Text Available Formation of the pricing system and underlying investment and construction activities were analyzed by the authors in their research. It is noteworthy that the pricing system has a common basis with other human systems, as it incorporates such constituents as process, people, software, etc. Correct interaction between these elements ensures conformity between the anticipated and the practical performance of the system. The basis for the effective operation of the existing system and reduction of potential risks consists in early identification and analysis of requirements set by the user. Absent of implementation of an effective requirement management process, the pattern of the system development will look chaotic and unpredictable. In the process of the data analysis, the data set is converted into a set of the user requirements describing the anticipated behavior of the system in the course of its interaction with the operating environment. The requirements of users comprise an important constituent of the system design. They affect the entire development process from the beginning to the very end. In accordance with the principles of the system engineering, the authors have identified the key pricing system parameters; their implementation assures the appropriate functionality with a view to the formation of the contract price at various stages of the life-cycle of the investment project. Analysis of the above requirements makes it possible to convert them into a technical vision of the desired product that can demonstrate the required functionality. The methodology proposed by the authors contemplates decomposition of the levels of requirements; therefore, the authors employ a three-level model that describes the expected functionality of the system. The model includes an organizational level (basic processes, participants, information flows, a methodological level (method of calculating the cost of design, construction and operation

  2. Quality assurance and reference material requirements and considerations for environmental sample analysis in nuclear forensics

    International Nuclear Information System (INIS)

    Swindle, D.W. Jr.; Perrin, R.E.; Goldberg, S.A.; Cappis, J.

    2002-01-01

    Full text: High-sensitivity nuclear environmental sampling and analysis techniques have been proven in their ability to verify declared nuclear activities, as well as to assist in the detection of undeclared nuclear activities and facilities. Following the Gulf War, the capability and revealing power of environmental sampling and analysis techniques to support international safeguards was demonstrated and subsequently adopted by the International Atomic Energy Agency (IAEA) as routine safeguards measures in safeguards inspections and verifications. In addition to having been proved useful in international safeguards, environmental sampling and analysis techniques have demonstrated their utility in identifying the origins of 'orphaned' nuclear material, as well as the origin of intercepted smuggled nuclear material. Today, environmental sampling and analysis techniques are now being applied in six broad areas to support nonproliferation, disarmament treaty verification, national and international nuclear security, and environmental stewardship of weapons production activities. Consequently, more and more laboratories around the world are establishing capabilities or expanding capabilities to meet these growing applications, and as such requirements for quality assurance and control are increasing. The six areas are: 1) Nuclear safeguards; 2) Nuclear forensics/illicit trafficking; 3) Ongoing monitoring and verification (OMV); 4) Comprehensive Test Ban Treaty (CTBT); 5) Weapons dismantlement/materials disposition; and 6) Research and development (R and D)/environmental stewardship/safety. Application of environmental sampling and analysis techniques and resources to illicit nuclear material trafficking, while embodying the same basic techniques and resources, does have unique requirements for sample management, handling, protocols, chain of custody, archiving, and data interpretation. These requirements are derived from needs of how data from nuclear forensics

  3. Analysis of the Possibility of Required Resources Estimation for Nuclear Power Plant Decommissioning Applying BIM

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Insu [Korea Institute of construction Technology, Goyang (Korea, Republic of); Kim, Woojung [KHNP-Central Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    Estimation of decommissioning cost, decommissioning strategy, and decommissioning quantity at the time when entering into any decommissioning plans are some elements whose inputs are mandatory for nuclear power plant decommissioning. Ways to estimate decommissioning of required resources in the past have imposed great uncertainty since they analyze required resources at the construction stage, analyzing and consulting decommissioning required resources of overseas nuclear power plants. This study aims at analyzing whether required resources for decommissioning nuclear power plants can be estimated, applying BIM. To achieve this goal, this study analyzed the status quo of BIM such as definition, characteristics, and areas applied, and made use of them when drawing out study results by examining types and features of the tools realizing BIM. In order to review how BIM could be used for decommissioning nuclear power plants, the definition, characteristics and applied areas of BIM were discussed. BIM designs objects of the structures (walls, slabs, pillars, stairs, windows and doors, etc.) by 3D technology and endows attribute (function, structure and usage) information for each object, thereby providing visualized information of structures for participants in construction projects. Major characteristics of BIM attribute information are as follows: - Geometry: The information of objects is represented by measurable geometric information - Extensible object attributes: Objects include pre-defined attributes, and allow extension of other attributes. Any model that includes these attributes forms relationships with other various attributes in order to perform analysis and simulation. - All information including the attributes are integrated to ensure continuity, accuracy and accessibility, and all information used during the life cycle of structures are supported. This means that when information of required resources is added as another attributes other than geometric

  4. Radiation-resistant requirements analysis of device and control component for advanced spent fuel management process

    Energy Technology Data Exchange (ETDEWEB)

    Song, Tai Gil; Park, G. Y.; Kim, S. Y.; Lee, J. Y.; Kim, S. H.; Yoon, J. S. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-02-01

    It is known that high levels of radiation can cause significant damage by altering the properties of materials. A practical understanding of the effects of radiation - how radiation affects various types of materials and components - is required to design equipment to operate reliably in a gamma radiation environment. When designing equipment to operate in a high gamma radiation environment, such as will be present in a nuclear spent fuel handling facility, several important steps should be followed. In order to active test of the advanced spent fuel management process, the radiation-resistant analysis of the device and control component for active test which is concerned about the radiation environment is conducted. Also the system design process is analysis and reviewed. In the foreign literature, 'threshold' values are generally reported. the threshold values are normally the dose required to begin degradation in a particular material property. The radiation effect analysis for the device of vol-oxidation and metalization, which are main device for the advanced spent fuel management process, is performed by the SCALE 4.4 code. 5 refs., 4 figs., 13 tabs. (Author)

  5. Technology and Research Requirements for Combating Human Trafficking: Enhancing Communication, Analysis, Reporting, and Information Sharing

    Energy Technology Data Exchange (ETDEWEB)

    Kreyling, Sean J.; West, Curtis L.; Olson, Jarrod

    2011-03-17

    DHS’ Science & Technology Directorate directed PNNL to conduct an exploratory study on the domain of human trafficking in the Pacific Northwest in order to examine and identify technology and research requirements for enhancing communication, analysis, reporting, and information sharing – activities that directly support efforts to track, identify, deter, and prosecute human trafficking – including identification of potential national threats from smuggling and trafficking networks. This effort was conducted under the Knowledge Management Technologies Portfolio as part of the Integrated Federal, State, and Local/Regional Information Sharing (RISC) and Collaboration Program.

  6. Economic analysis vs. capital-recovery requirements of power reactor decommissioning

    International Nuclear Information System (INIS)

    Ferguson, J.S.

    1980-01-01

    As a consultant to electric utilities the author often becomes involved in the development of policy for capital recovery and in the determination of depreciation rates that will implement the policy. Utility capital recovery is controlled by generally accepted depreciation accounting practices and by regulatory commission accounting rules and, as a result, can differ significantly from engineering economics. Those involved with decommissioning of power reactors should be aware of the depreciation accounting and regulatory framework that dictates capital recovery requirements, whether their involvement is related to engineering economics or capital recovery. This presentation defines that framework, points out several significant implications (particularly tax), describes several conforming capital-recovery methods, describes several techniques that have been used with the decommissioning component in economic analysis of alternative energy sources, and discusses why those involved in economic analysis should learn the accounting and regulatory framework for capital recovery

  7. Utilization of the safety functional analysis techniques to optimize the separation requirements in case of fire

    International Nuclear Information System (INIS)

    Alvarez, L.M.

    1983-01-01

    The present philosophy for the fire protection of the safe shutdown capability in nuclear power plants is based on the separation of the safety-related systems in different fire areas in such a way that the redundant systems are not subject to damage from a single fire risk. The purpose ofthis paper is to show the experience gained in the application of a symmetric method of analysis to minimize the number of fire barriers being compatible with the regulatory requirements and with capability of achieving and maintaining the safe plant shutdown in the event of a fire. As a conclusion of the analysis, the separation criteria for the divisions involved in the safe plant shutdown are obtained

  8. An application of computer aided requirements analysis to a real time deep space system

    Science.gov (United States)

    Farny, A. M.; Morris, R. V.; Hartsough, C.; Callender, E. D.; Teichroew, D.; Chikofsky, E.

    1981-01-01

    The entire procedure of incorporating the requirements and goals of a space flight project into integrated, time ordered sequences of spacecraft commands, is called the uplink process. The Uplink Process Control Task (UPCT) was created to examine the uplink process and determine ways to improve it. The Problem Statement Language/Problem Statement Analyzer (PSL/PSA) designed to assist the designer/analyst/engineer in the preparation of specifications of an information system is used as a supporting tool to aid in the analysis. Attention is given to a definition of the uplink process, the definition of PSL/PSA, the construction of a PSA database, the value of analysis to the study of the uplink process, and the PSL/PSA lessons learned.

  9. An assistive technology for hearing-impaired persons: analysis, requirements and architecture.

    Science.gov (United States)

    Mielke, Matthias; Grunewald, Armin; Bruck, Rainer

    2013-01-01

    In this contribution, a concept of an assistive technology for hearing-impaired and deaf persons is presented. The concept applies pattern recognition algorithms and makes use of modern communication technology to analyze the acoustic environment around a user, identify critical acoustic signatures and give an alert to the user when an event of interest happened. A detailed analysis of the needs of deaf and hearing-impaired people has been performed. Requirements for an adequate assisting device have been derived from the results of the analysis, and have been turned into an architecture for its implementation that will be presented in this article. The presented concept is the basis for an assistive system which is now under development at the Institute of Microsystem Engineering at the University of Siegen.

  10. Nutritional requirements of sheep, goats and cattle in warm climates: a meta-analysis.

    Science.gov (United States)

    Salah, N; Sauvant, D; Archimède, H

    2014-09-01

    The objective of the study was to update energy and protein requirements of growing sheep, goats and cattle in warm areas through a meta-analysis study of 590 publications. Requirements were expressed on metabolic live weight (MLW=LW0.75) and LW1 basis. The maintenance requirements for energy were 542.64 and 631.26 kJ ME/kg LW0.75 for small ruminants and cattle, respectively, and the difference was significant (Ptropical climate appeared to have higher ME requirements for maintenance relative to live weight (LW) compared with temperate climate ones and cattle. Maintenance requirements for protein were estimated via two approaches. For these two methods, the data in which retained nitrogen (RN) was used cover the same range of variability of observations. The regression of digestible CP intake (DCPI, g/kg LW0.75) against RN (g/kg LW0.75) indicated that DCP requirements are significantly higher in sheep (3.36 g/kg LW0.75) than in goats (2.38 g/kg LW0.75), with cattle intermediate (2.81 g/kg LW0.75), without any significant difference in the quantity of DCPI/g retained CP (RCP) (40.43). Regressing metabolisable protein (MP) or minimal digestible protein in the intestine (PDImin) against RCP showed that there was no difference between species and genotypes, neither for the intercept (maintenance=3.51 g/kg LW0.75 for sheep and goat v. 4.35 for cattle) nor for the slope (growth=0.60 g MP/g RCP). The regression of DCP against ADG showed that DCP requirements did not differ among species or genotypes. These new feeding standards are derived from a wider range of nutritional conditions compared with existing feeding standards as they are based on a larger database. The standards seem to be more appropriate for ruminants in warm and tropical climates around the world.

  11. Proper joint analysis of summary association statistics requires the adjustment of heterogeneity in SNP coverage pattern.

    Science.gov (United States)

    Zhang, Han; Wheeler, William; Song, Lei; Yu, Kai

    2017-07-07

    As meta-analysis results published by consortia of genome-wide association studies (GWASs) become increasingly available, many association summary statistics-based multi-locus tests have been developed to jointly evaluate multiple single-nucleotide polymorphisms (SNPs) to reveal novel genetic architectures of various complex traits. The validity of these approaches relies on the accurate estimate of z-score correlations at considered SNPs, which in turn requires knowledge on the set of SNPs assessed by each study participating in the meta-analysis. However, this exact SNP coverage information is usually unavailable from the meta-analysis results published by GWAS consortia. In the absence of the coverage information, researchers typically estimate the z-score correlations by making oversimplified coverage assumptions. We show through real studies that such a practice can generate highly inflated type I errors, and we demonstrate the proper way to incorporate correct coverage information into multi-locus analyses. We advocate that consortia should make SNP coverage information available when posting their meta-analysis results, and that investigators who develop analytic tools for joint analyses based on summary data should pay attention to the variation in SNP coverage and adjust for it appropriately. Published by Oxford University Press 2017. This work is written by US Government employees and is in the public domain in the US.

  12. Trends in musical theatre voice: an analysis of audition requirements for singers.

    Science.gov (United States)

    Green, Kathryn; Freeman, Warren; Edwards, Matthew; Meyer, David

    2014-05-01

    The American musical theatre industry is a multibillion dollar business in which the requirements for singers are varied and complex. This study identifies the musical genres and voice requirements that are currently most requested at professional auditions to help voice teachers, pedagogues, and physicians who work with musical theatre singers understand the demands of their clients' business. Frequency count. One thousand two thirty-eight professional musical theatre audition listings were gathered over a 6-month period, and information from each listing was categorized and entered into a spreadsheet for analysis. The results indicate that four main genres of music were requested over a wide variety of styles, with more than half of auditions requesting genre categories that may not be served by traditional or classical voice technique alone. To adequately prepare young musical theatre performers for the current job market and keep the performers healthily making the sounds required by the industry, new singing styles may need to be studied and integrated into voice training that only teaches classical styles. Copyright © 2014 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

  13. The analysis of normative requirements to materials of VVER components, basing on LBB concepts

    Energy Technology Data Exchange (ETDEWEB)

    Anikovsky, V.V.; Karzov, G.P.; Timofeev, B.T. [CRISM Prometey, St. Petersburg (Russian Federation)

    1997-04-01

    The paper demonstrates an insufficiency of some requirements native Norms (when comparing them with the foreign requirements for the consideration of calculating situations): (1) leak before break (LBB); (2) short cracks; (3) preliminary loading (warm prestressing). In particular, the paper presents (1) Comparison of native and foreign normative requirements (PNAE G-7-002-86, Code ASME, BS 1515, KTA) on permissible stress levels and specifically on the estimation of crack initiation and propagation; (2) comparison of RF and USA Norms of pressure vessel material acceptance and also data of pressure vessel hydrotests; (3) comparison of Norms on the presence of defects (RF and USA) in NPP vessels, developments of defect schematization rules; foundation of a calculated defect (semi-axis correlation a/b) for pressure vessel and piping components: (4) sequence of defect estimation (growth of initial defects and critical crack sizes) proceeding from the concept LBB; (5) analysis of crack initiation and propagation conditions according to the acting Norms (including crack jumps); (6) necessity to correct estimation methods of ultimate states of brittle an ductile fracture and elastic-plastic region as applied to calculating situation: (a) LBB and (b) short cracks; (7) necessity to correct estimation methods of ultimate states with the consideration of static and cyclic loading (warm prestressing effect) of pressure vessel; estimation of the effect stability; (8) proposals on PNAE G-7-002-86 Norm corrections.

  14. Analysis of power and frequency control requirements in view of increased decentralized production and market liberalization

    International Nuclear Information System (INIS)

    Roffel, B.; Boer, W.W. de

    2003-01-01

    This paper presents a systematic approach of the analysis of the minimum control requirements that are imposed on power producing units in the Netherlands, especially in the case when decentralized production increases. Also some effects of the liberalization on the control behavior are analyzed. First an overview is given of the amount and type of power production in the Netherlands, followed by a review of the control requirements. Next models are described, including a simplified model for the UCTE power system. The model was tested against frequency and power measurements after failure of a 558 MW production unit in the Netherlands. Agreement between measurements and model predictions proved to be good. The model was subsequently used to analyze the primary and secondary control requirements and the impact of an increase in decentralized power production on the fault restoration capabilities of the power system. Since the latter production units are not actively participating in primary and secondary control, fault restoration takes longer and becomes unacceptable when only 35% of the power producing units participate in secondary control. Finally, the model was used to study the impact of deregulation, especially the effect of 'block scheduling', on additional control actions of the secondary control. (Author)

  15. Discussion on sealing performance required in disposal system. Hydraulic analysis of tunnel intersections

    International Nuclear Information System (INIS)

    Sugita, Yutaka; Takahashi, Yoshiaki; Uragami, Manabu; Kitayama, Kazumi; Fujita, Tomoo; Kawakami, Susumu; Yui, Mikazu; Umeki, Hiroyuki; Miyamoto, Yoichi

    2005-09-01

    The sealing performance of a repository must be considered in the safety assessment of the geological disposal system of the high-level radioactive waste. NUMO and JNC established 'Technical Commission on Sealing Technology of Repository' based on the cooperation agreement. The objectives of this commission are to present the concept on the sealing performance required in the disposal system and to develop the direction for future R and D programme for design requirements of closure components (backfilling material, clay plug, etc.) in the presented concept. In the first phase of this commission, the current status of domestic and international sealing technologies were reviewed; and repository components and repository environments were summarized subsequently, the hydraulic analysis of tunnel intersections, where a main tunnel and a disposal tunnel in a disposal panel meet, were performed, considering components in and around the engineered barrier system (EBS). Since all tunnels are connected in the underground facility, understanding the hydraulic behaviour of tunnel intersections is an important issue to estimate migration of radionuclides from the EBS and to evaluate the required sealing performance in the disposal system. In the analytical results, it was found that the direction of hydraulic gradient, hydraulic conductivities of concrete and backfilling materials and the position of clay plug had impact on flow condition around the EBS. (author)

  16. Human T cell colony formation in microculture: analysis of growth requirements and functional activities.

    Science.gov (United States)

    Gelfand, E W; Lee, J W; Dosch, H M; Price, G B

    1981-03-01

    A microculture method in methylcellulose has been developed for the study of human T cell colony formation. The technique is simple, reliable, does not require preincubation with lectin and requires small numbers of cells. Colony formation was dependent on the presence of phytohemagglutin-conditioned medium, a T colony precursor cell (TCPC), and a "helper" or accessory T cell. Plating efficiency was increased 10-fold in the presence of irradiated feeder cells. Progenitors of the T colony cells were identified in peripheral blood, tonsil, and spleen but not in thymus or thoracic duct. They were isolated in the E-rosetting, theophylline-resistant, Fc-IgG-negative cell populations. In peripheral blood the frequency of TCPC and accessory cells, the T colony forming unit, was estimated to be 8 X 10(-3). Colony cells proliferated in response to lectins and allogeneic cells. Forty to 80% of the cells were Ia-positive and stimulated both autologous and allogeneic mixed lymphocyte responses. They were incapable of mediating antibody-dependent cytotoxicity. In contrast, they were effective in assays of spontaneous cytotoxicity but only against certain target cells. This method for the analysis of T colony formation should prove valuable in the functional analysis of T cell subsets in immunodeficiency states or the transplant recipient.

  17. Requirement analysis for the one-stop logistics management of fresh agricultural products

    Science.gov (United States)

    Li, Jun; Gao, Hongmei; Liu, Yuchuan

    2017-08-01

    Issues and concerns for food safety, agro-processing, and the environmental and ecological impact of food production have been attracted many research interests. Traceability and logistics management of fresh agricultural products is faced with the technological challenges including food product label and identification, activity/process characterization, information systems for the supply chain, i.e., from farm to table. Application of one-stop logistics service focuses on the whole supply chain process integration for fresh agricultural products is studied. A collaborative research project for the supply and logistics of fresh agricultural products in Tianjin was performed. Requirement analysis for the one-stop logistics management information system is studied. The model-driven business transformation, an approach uses formal models to explicitly define the structure and behavior of a business, is applied for the review and analysis process. Specific requirements for the logistic management solutions are proposed. Development of this research is crucial for the solution of one-stop logistics management information system integration platform for fresh agricultural products.

  18. Conflict Resolution for Product Performance Requirements Based on Propagation Analysis in the Extension Theory

    Directory of Open Access Journals (Sweden)

    Yanwei Zhao

    2014-01-01

    Full Text Available Traditional product data mining methods are mainly focused on the static data. Performance requirements are generally met as possible by finding some cases and changing their structures. However, when one is satisfied with the structures changed, the other effects are not taken into account by analyzing the correlations; that is, design conflicts are not identified and resolved. An approach to resolving the conflict problems is proposed based on propagation analysis in Extension Theory. Firstly, the extension distance is improved to better fit evaluating the similarity among cases, then, a case retrieval method is developed. Secondly, the transformations that can be made on selected cases are formulated by understanding the conflict natures in the different performance requirements, which leads to the extension transformation strategy development for coordinating conflicts using propagation analysis. Thirdly, the effects and levels of propagation are determined by analyzing the performance values before and after the transformations, thus the co-existing conflict coordination strategy of multiple performances is developed. The method has been implemented in a working prototype system for supporting decision-making. And it has been demonstrated the feasible and effective through resolving the conflicts of noise, exhaust, weight and intake pressure for the screw air compressor performance design.

  19. Modelling elderly cardiac patients decision making using Cognitive Work Analysis: identifying requirements for patient decision aids.

    Science.gov (United States)

    Dhukaram, Anandhi Vivekanandan; Baber, Chris

    2015-06-01

    Patients make various healthcare decisions on a daily basis. Such day-to-day decision making can have significant consequences on their own health, treatment, care, and costs. While decision aids (DAs) provide effective support in enhancing patient's decision making, to date there have been few studies examining patient's decision making process or exploring how the understanding of such decision processes can aid in extracting requirements for the design of DAs. This paper applies Cognitive Work Analysis (CWA) to analyse patient's decision making in order to inform requirements for supporting self-care decision making. This study uses focus groups to elicit information from elderly cardiovascular disease (CVD) patients concerning a range of decision situations they face on a daily basis. Specifically, the focus groups addressed issues related to the decision making of CVD in terms of medication compliance, pain, diet and exercise. The results of these focus groups are used to develop high level views using CWA. CWA framework decomposes the complex decision making problem to inform three approaches to DA design: one design based on high level requirements; one based on a normative model of decision-making for patients; and the third based on a range of heuristics that patients seem to use. CWA helps in extracting and synthesising decision making from different perspectives: decision processes, work organisation, patient competencies and strategies used in decision making. As decision making can be influenced by human behaviour like skills, rules and knowledge, it is argued that patients require support to different types of decision making. This paper also provides insights for designers in using CWA framework for the design of effective DAs to support patients in self-management. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  20. Environmental Cost Analysis System (ECAS) Status and Compliance Requirements for EM Consolidated Business Center Contracts - 13204

    International Nuclear Information System (INIS)

    Sanford, P.C.; Moe, M.A.; Hombach, W.G.; Urdangaray, R.

    2013-01-01

    The Department of Energy (DOE) Office of Environmental Management (EM) has developed a web-accessible database to collect actual cost data from completed EM projects to support cost estimating and analysis. This Environmental Cost Analysis System (ECAS) database was initially deployed in early 2009 containing the cost and parametric data from 77 decommissioning, restoration, and waste management projects completed under the Rocky Flats Closure Project. In subsequent years we have added many more projects to ECAS and now have a total of 280 projects from 8 major DOE sites. This data is now accessible to DOE users through a web-based reporting tool that allows users to tailor report outputs to meet their specific needs. We are using it as a principal resource supporting the EM Consolidated Business Center (EMCBC) and the EM Applied Cost Engineering (ACE) team cost estimating and analysis efforts across the country. The database has received Government Accountability Office review as supporting its recommended improvements in DOE's cost estimating process, as well as review from the DOE Office of Acquisition and Project Management (APM). Moving forward, the EMCBC has developed a Special Contract Requirement clause or 'H-Clause' to be included in all current and future EMCBC procurements identifying the process that contractors will follow to provide DOE their historical project data in a format compatible with ECAS. Changes to DOE O 413.3B implementation are also in progress to capture historical costs as part of the Critical Decision project closeout process. (authors)

  1. Robotics/Automated Systems Task Analysis and Description of Required Job Competencies Report. Task Analysis and Description of Required Job Competencies of Robotics/Automated Systems Technicians.

    Science.gov (United States)

    Hull, Daniel M.; Lovett, James E.

    This task analysis report for the Robotics/Automated Systems Technician (RAST) curriculum project first provides a RAST job description. It then discusses the task analysis, including the identification of tasks, the grouping of tasks according to major areas of specialty, and the comparison of the competencies to existing or new courses to…

  2. Identification and Analysis of Critical Gaps in Nuclear Fuel Cycle Codes Required by the SINEMA Program

    International Nuclear Information System (INIS)

    Miron, Adrian; Valentine, Joshua; Christenson, John; Hawwari, Majd; Bhatt, Santosh; Dunzik-Gougar, Mary Lou; Lineberry, Michael

    2009-01-01

    The current state of the art in nuclear fuel cycle (NFC) modeling is an eclectic mixture of codes with various levels of applicability, flexibility, and availability. In support of the advanced fuel cycle systems analyses, especially those by the Advanced Fuel Cycle Initiative (AFCI), University of Cincinnati in collaboration with Idaho State University carried out a detailed review of the existing codes describing various aspects of the nuclear fuel cycle and identified the research and development needs required for a comprehensive model of the global nuclear energy infrastructure and the associated nuclear fuel cycles. Relevant information obtained on the NFC codes was compiled into a relational database that allows easy access to various codes' properties. Additionally, the research analyzed the gaps in the NFC computer codes with respect to their potential integration into programs that perform comprehensive NFC analysis.

  3. Analysis of Balancing Requirements in Future Sustainable and Reliable Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Frunt, J.

    2011-06-01

    This thesis elaborates on the rules for power balancing, provides a method for quantifying balancing requirements and examines the effect of future changes on balancing. Chapter 2 elaborates on system balancing and the different actors and entities in the electricity delivery system. The necessity and implementation of power balancing are explained. Also different subsequent markets (i.e., day-ahead markets, intraday markets and imbalance settlement systems) and options to trade electricity are discussed. As the research focusses mainly on the Netherlands, properties of the Dutch imbalance settlement system are analyzed. Based on this framework an in-depth analysis of imbalances and calls for balancing capacity with the corresponding prices is given. This shows the incentives to minimize the amount of imbalance in the system and to participate in the imbalance settlement system. Chapter 3 elaborates on the level of aggregation that the entities, involved in the imbalance settlement system, in electricity markets can have. Based on current market rules, incentives to either grow or shrink and by aggregating more or less entities are discussed. The level of aggregation will directly influence the functioning of the imbalance settlement system. It is shown that larger aggregations benefit more from the canceling out of imbalances. The imbalances of the Netherlands and Belgium have been aggregated to illustrate the possible benefits of aggregating multiple national imbalance settlement systems. The increased penetration of renewable generation strongly influences the planning and operation of the power system. As many renewable energy generators have a fluctuating power output, several methods are discussed in chapter 4 that can be used to classify and quantify the balancing requirements to counteract these fluctuations. Chapter 4 discusses the multiple existing classes of balancing capacity and the corresponding methods to quantify their needs. Due to the

  4. Identification and Analysis of Critical Gaps in Nuclear Fuel Cycle Codes Required by the SINEMA Program

    Energy Technology Data Exchange (ETDEWEB)

    Adrian Miron; Joshua Valentine; John Christenson; Majd Hawwari; Santosh Bhatt; Mary Lou Dunzik-Gougar: Michael Lineberry

    2009-10-01

    The current state of the art in nuclear fuel cycle (NFC) modeling is an eclectic mixture of codes with various levels of applicability, flexibility, and availability. In support of the advanced fuel cycle systems analyses, especially those by the Advanced Fuel Cycle Initiative (AFCI), Unviery of Cincinnati in collaboration with Idaho State University carried out a detailed review of the existing codes describing various aspects of the nuclear fuel cycle and identified the research and development needs required for a comprehensive model of the global nuclear energy infrastructure and the associated nuclear fuel cycles. Relevant information obtained on the NFC codes was compiled into a relational database that allows easy access to various codes' properties. Additionally, the research analyzed the gaps in the NFC computer codes with respect to their potential integration into programs that perform comprehensive NFC analysis.

  5. Analysis of Balancing Requirements in Future Sustainable and Reliable Power Systems

    International Nuclear Information System (INIS)

    Frunt, J.

    2011-01-01

    This thesis elaborates on the rules for power balancing, provides a method for quantifying balancing requirements and examines the effect of future changes on balancing. Chapter 2 elaborates on system balancing and the different actors and entities in the electricity delivery system. The necessity and implementation of power balancing are explained. Also different subsequent markets (i.e., day-ahead markets, intraday markets and imbalance settlement systems) and options to trade electricity are discussed. As the research focusses mainly on the Netherlands, properties of the Dutch imbalance settlement system are analyzed. Based on this framework an in-depth analysis of imbalances and calls for balancing capacity with the corresponding prices is given. This shows the incentives to minimize the amount of imbalance in the system and to participate in the imbalance settlement system. Chapter 3 elaborates on the level of aggregation that the entities, involved in the imbalance settlement system, in electricity markets can have. Based on current market rules, incentives to either grow or shrink and by aggregating more or less entities are discussed. The level of aggregation will directly influence the functioning of the imbalance settlement system. It is shown that larger aggregations benefit more from the canceling out of imbalances. The imbalances of the Netherlands and Belgium have been aggregated to illustrate the possible benefits of aggregating multiple national imbalance settlement systems. The increased penetration of renewable generation strongly influences the planning and operation of the power system. As many renewable energy generators have a fluctuating power output, several methods are discussed in chapter 4 that can be used to classify and quantify the balancing requirements to counteract these fluctuations. Chapter 4 discusses the multiple existing classes of balancing capacity and the corresponding methods to quantify their needs. Due to the

  6. Extensions to the Joshua GDMS to support environmental science and analysis data handling requirements

    International Nuclear Information System (INIS)

    Suich, J.E.; Honeck, H.C.

    1978-01-01

    For the past ten years, a generalized data management system (GDMS) called JOSHUA has been in use at the Savannah River Laboratory. Originally designed and implemented to support nuclear reactor physics and safety computational applications, the system is now also supporting environmental science modeling and impact assessment. Extensions to the original system are being developed to meet neet new data handling requirements, which include more general owner-member record relationships occurring in geographically encoded data sets, unstructured (relational) inquiry capability, cartographic analysis and display, and offsite data exchange. This paper discusses the need for these capabilities, places them in perspective as generic scientific data management activities, and presents the planned context-free extensions to the basic JOSHUA GDMS

  7. Extensions to the Joshua GDMS to support environmental science and analysis data handling requirements

    International Nuclear Information System (INIS)

    Suich, J.E.; Honeck, H.C.

    1977-01-01

    For the past ten years, a generalized data management system (GDMS) called JOSHUA has been in use at the Savannah River Laboratory. Originally designed and implemented to support nuclear reactor physics and safety computational applications, the system is now also supporting environmental science modeling and impact assessment. Extensions to the original system are being developed to meet new data handling requirements, which include more general owner-member record relationships occurring in geographically encoded data sets, unstructured (relational) inquiry capability, cartographic analysis and display, and offsite data exchange. This paper discusses the need for these capabilities, places them in perspective as generic scientific data management activities, and presents the planned context-free extensions to the basic JOSHUA GDMS

  8. Side channel analysis of some hash based MACs:A response to SHA-3 requirements

    DEFF Research Database (Denmark)

    The forthcoming NIST's Advanced Hash Standard (AHS) competition to select SHA-3 hash function requires that each candidate hash function submission must have at least one construction to support FIPS 198 HMAC application. As part of its evaluation, NIST is aiming to select either a candidate hash...... function which is more resistant to known side channel attacks (SCA) when plugged into HMAC, or that has an alternative MAC mode which is more resistant to known SCA than the other submitted alternatives. In response to this, we perform differential power analysis (DPA) on the possible smart card...... implementations of some of the recently proposed MAC alternatives to NMAC (a fully analyzed variant of HMAC) and HMAC algorithms and NMAC/HMAC versions of some recently proposed hash and compression function modes. We show that the recently proposed BNMAC and KMDP MAC schemes are even weaker than NMAC...

  9. Sensitivity Analysis of Hydraulic Methods Regarding Hydromorphologic Data Derivation Methods to Determine Environmental Water Requirements

    Directory of Open Access Journals (Sweden)

    Alireza Shokoohi

    2015-07-01

    Full Text Available This paper studies the accuracy of hydraulic methods in determining environmental flow requirements. Despite the vital importance of deriving river cross sectional data for hydraulic methods, few studies have focused on the criteria for deriving this data. The present study shows that the depth of cross section has a meaningful effect on the results obtained from hydraulic methods and that, considering fish as the index species for river habitat analysis, an optimum depth of 1 m should be assumed for deriving information from cross sections. The second important parameter required for extracting the geometric and hydraulic properties of rivers is the selection of an appropriate depth increment; ∆y. In the present research, this parameter was found to be equal to 1 cm. The uncertainty of the environmental discharge evaluation, when allocating water in areas with water scarcity, should be kept as low as possible. The Manning friction coefficient (n is an important factor in river discharge calculation. Using a range of "n" equal to 3 times the standard deviation for the study area, it is shown that the influence of friction coefficient on the estimation of environmental flow is much less than that on the calculation of river discharge.

  10. Gap analysis of Mycoplasma bovis disease, diagnosis and control: An aid to identify future development requirements.

    Science.gov (United States)

    Calcutt, M J; Lysnyansky, I; Sachse, K; Fox, L K; Nicholas, R A J; Ayling, R D

    2018-05-01

    There is a worldwide problem of disease caused by Mycoplasma (M.) bovis in cattle; it has a significant detrimental economic and animal welfare impact on cattle rearing. Infection can manifest as a plethora of clinical signs including mastitis, pneumonia, arthritis, keratoconjunctivitis, otitis media and genital disorders that may result in infertility and abortion. Current diagnosis and control information are reviewed and analysed to identify gaps in knowledge of the causative organism in respect of the disease pathology, diagnosis and control methods. The main considerations are as follows: no vaccines are commercially available; antimicrobial resistance is increasing; diagnostic and antimicrobial sensitivity testing needs to be improved; and a pen-side test would facilitate more rapid diagnosis and implementation of treatment with antimicrobials. More data on host susceptibility, stress factors, immune response and infectious dose levels are required. The impact of asymptomatic carriers, M. bovis survival in the environment and the role of wildlife in transmitting the disease also needs investigation. To facilitate development of vaccines, further analysis of more M. bovis genomes, its pathogenic mechanisms, including variable surface proteins, is required, along with reproducible disease models. © 2018 Blackwell Verlag GmbH.

  11. An Analysis of Database Replication Technologies with Regard to Deep Space Network Application Requirements

    Science.gov (United States)

    Connell, Andrea M.

    2011-01-01

    The Deep Space Network (DSN) has three communication facilities which handle telemetry, commands, and other data relating to spacecraft missions. The network requires these three sites to share data with each other and with the Jet Propulsion Laboratory for processing and distribution. Many database management systems have replication capabilities built in, which means that data updates made at one location will be automatically propagated to other locations. This project examines multiple replication solutions, looking for stability, automation, flexibility, performance, and cost. After comparing these features, Oracle Streams is chosen for closer analysis. Two Streams environments are configured - one with a Master/Slave architecture, in which a single server is the source for all data updates, and the second with a Multi-Master architecture, in which updates originating from any of the servers will be propagated to all of the others. These environments are tested for data type support, conflict resolution, performance, changes to the data structure, and behavior during and after network or server outages. Through this experimentation, it is determined which requirements of the DSN can be met by Oracle Streams and which cannot.

  12. [Mobile Health Units: An Analysis of Concepts and Implementation Requirements in Rural Regions.

    Science.gov (United States)

    Hämel, K; Kutzner, J; Vorderwülbecke, J

    2017-12-01

    Access to health services in rural regions represents a challenge. The development of care models that respond to health service shortages and pay particular attention to the increasing health care needs of the elderly is an important concern. A model that has been implemented in other countries is that of mobile health units. But until now, there is no overview of their possible objectives, functions and implementation requirements. This paper is based on a literature analysis and an internet research on mobile health units in rural regions. Mobile health units aim to avoid regional undersupply and address particularly vulnerable population groups. In the literature, mobile health units are described with a focus on specific illnesses, as well as those that provide comprehensive, partly multi-professional primary care that is close to patients' homes. The implementation of mobile health units is demanding; the key challenges are (a) alignment to the needs of the regional population, (b) user-oriented access and promotion of awareness and acceptance of mobile health units by the local population, and (c) network building within existing care structures to ensure continuity of care for patients. To fulfill these requirements, a community-oriented program development and implementation is important. Mobile health units could represent an interesting model for the provision of health care in rural regions in Germany. International experiences are an important starting point and should be taken into account for the further development of models in Germany. © Georg Thieme Verlag KG Stuttgart · New York.

  13. Standards for deuterium analysis requirements of heavy water plants (Preprint No. CA-1)

    Energy Technology Data Exchange (ETDEWEB)

    Rathi, B N; Gopalakrishnan, V T; Alphonse, K P; Pawar, P L; Sadhukhan, H K [Bhabha Atomic Research Centre, Bombay (India). Heavy Water Div.

    1989-04-01

    Accurate analysis of deuterium, covering the entire range, is of great importance in production of heavy water. Most of the methods for determination of deuterium in gas or liquid samples require appropriate standards. Since density of pure protium oxide and pure deuterium oxide has been determined very accurately by a large number of workers and density of mixtures of H{sub 2}O and D{sub 2}O follows a linear relation, it is possible to use accurate density determination for measurement of deuterium content. Float method for density measurements was improved further and used for the preparation of primary heavy water standards in high and low deuterium ranges. Heavy water plant laboratories require gas standards (ammonia synthesis gas matrix), in addition to low deuterium water standards, for calibration of mass spectrometers. SLAP (Standard Light Antarctic Precipitation, D/D+H = 89.02+-0.05ppm) and SMOW (Standard Mean Ocean Water, D/D+H =155.76+-0.05ppm) available from IAEA, Vienna, along with water practically free from deuterium, were used as standards to prepare secondary liquid standards. These secondary standards were subsequently reduced and mixed with pure nitrogen to obtain D/D+H standards in syngas matrix. (author). 8 refs., 2 figs.

  14. Westinghouse Hanford Company safety analysis reports and technical safety requirements upgrade program

    International Nuclear Information System (INIS)

    Busche, D.M.

    1995-09-01

    During Fiscal Year 1992, the US Department of Energy, Richland Operations Office (RL) separately transmitted the following US Department of Energy (DOE) Orders to Westinghouse Hanford Company (WHC) for compliance: DOE 5480.21, ''Unreviewed Safety Questions,'' DOE 5480.22, ''Technical Safety Requirements,'' and DOE 5480.23, ''Nuclear Safety Analysis Reports.'' WHC has proceeded with its impact assessment and implementation process for the Orders. The Orders are closely-related and contain some requirements that are either identical, similar, or logically-related. Consequently, WHC has developed a strategy calling for an integrated implementation of the three Orders. The strategy is comprised of three primary objectives, namely: Obtain DOE approval of a single list of DOE-owned and WHC-managed Nuclear Facilities, Establish and/or upgrade the ''Safety Basis'' for each Nuclear Facility, and Establish a functional Unreviewed Safety Question (USQ) process to govern the management and preservation of the Safety Basis for each Nuclear Facility. WHC has developed policy-revision and facility-specific implementation plans to accomplish near-term tasks associated with the above strategic objectives. This plan, which as originally submitted in August 1993 and approved, provided an interpretation of the new DOE Nuclear Facility definition and an initial list of WHC-managed Nuclear Facilities. For each current existing Nuclear Facility, existing Safety Basis documents are identified and the plan/status is provided for the ISB. Plans for upgrading SARs and developing TSRs will be provided after issuance of the corresponding Rules

  15. Business Process Modelling is an Essential Part of a Requirements Analysis. Contribution of EFMI Primary Care Working Group.

    Science.gov (United States)

    de Lusignan, S; Krause, P; Michalakidis, G; Vicente, M Tristan; Thompson, S; McGilchrist, M; Sullivan, F; van Royen, P; Agreus, L; Desombre, T; Taweel, A; Delaney, B

    2012-01-01

    To perform a requirements analysis of the barriers to conducting research linking of primary care, genetic and cancer data. We extended our initial data-centric approach to include socio-cultural and business requirements. We created reference models of core data requirements common to most studies using unified modelling language (UML), dataflow diagrams (DFD) and business process modelling notation (BPMN). We conducted a stakeholder analysis and constructed DFD and UML diagrams for use cases based on simulated research studies. We used research output as a sensitivity analysis. Differences between the reference model and use cases identified study specific data requirements. The stakeholder analysis identified: tensions, changes in specification, some indifference from data providers and enthusiastic informaticians urging inclusion of socio-cultural context. We identified requirements to collect information at three levels: micro- data items, which need to be semantically interoperable, meso- the medical record and data extraction, and macro- the health system and socio-cultural issues. BPMN clarified complex business requirements among data providers and vendors; and additional geographical requirements for patients to be represented in both linked datasets. High quality research output was the norm for most repositories. Reference models provide high-level schemata of the core data requirements. However, business requirements' modelling identifies stakeholder issues and identifies what needs to be addressed to enable participation.

  16. Comparison and Cost Analysis of Drinking Water Quality Monitoring Requirements versus Practice in Seven Developing Countries

    Directory of Open Access Journals (Sweden)

    Jonny Crocker

    2014-07-01

    Full Text Available Drinking water quality monitoring programs aim to support provision of safe drinking water by informing water quality management. Little evidence or guidance exists on best monitoring practices for low resource settings. Lack of financial, human, and technological resources reduce a country’s ability to monitor water supply. Monitoring activities were characterized in Cambodia, Colombia, India (three states, Jordan, Peru, South Africa, and Uganda according to water sector responsibilities, monitoring approaches, and marginal cost. The seven study countries were selected to represent a range of low resource settings. The focus was on monitoring of microbiological parameters, such as E. coli, coliforms, and H2S-producing microorganisms. Data collection involved qualitative and quantitative methods. Across seven study countries, few distinct approaches to monitoring were observed, and in all but one country all monitoring relied on fixed laboratories for sample analysis. Compliance with monitoring requirements was highest for operational monitoring of large water supplies in urban areas. Sample transport and labor for sample collection and analysis together constitute approximately 75% of marginal costs, which exclude capital costs. There is potential for substantive optimization of monitoring programs by considering field-based testing and by fundamentally reconsidering monitoring approaches for non-piped supplies. This is the first study to look quantitatively at water quality monitoring practices in multiple developing countries.

  17. Radiation therapists' perceptions of the minimum level of experience required to perform portal image analysis

    International Nuclear Information System (INIS)

    Rybovic, Michala; Halkett, Georgia K.; Banati, Richard B.; Cox, Jennifer

    2008-01-01

    Background and purpose: Our aim was to explore radiation therapists' views on the level of experience necessary to undertake portal image analysis and clinical decision making. Materials and methods: A questionnaire was developed to determine the availability of portal imaging equipment in Australia and New Zealand. We analysed radiation therapists' responses to a specific question regarding their opinion on the minimum level of experience required for health professionals to analyse portal images. We used grounded theory and a constant comparative method of data analysis to derive the main themes. Results: Forty-six radiation oncology facilities were represented in our survey, with 40 questionnaires being returned (87%). Thirty-seven radiation therapists answered our free-text question. Radiation therapists indicated three main themes which they felt were important in determining the minimum level of experience: 'gaining on-the-job experience', 'receiving training' and 'working as a team'. Conclusions: Radiation therapists indicated that competence in portal image review occurs via various learning mechanisms. Further research is warranted to determine perspectives of other health professionals, such as radiation oncologists, on portal image review becoming part of radiation therapists' extended role. Suitable training programs and steps for implementation should be developed to facilitate this endeavour

  18. Requirement analysis of the safety-critical software implementation for the nuclear power plant

    International Nuclear Information System (INIS)

    Chang, Hoon Seon; Jung, Jae Cheon; Kim, Jae Hack; Nam, Sang Ku; Kim, Hang Bae

    2005-01-01

    The safety critical software shall be implemented under the strict regulation and standards along with hardware qualification. In general, the safety critical software has been implemented using functional block language (FBL) and structured language like C in the real project. Software design shall comply with such characteristics as; modularity, simplicity, minimizing the use of sub-routine, and excluding the interrupt logic. To meet these prerequisites, we used the computer-aided software engineering (CASE) tool to substantiate the requirements traceability matrix that were manually developed using Word processors or Spreadsheets. And the coding standard and manual have been developed to confirm the quality of software development process, such as; readability, consistency, and maintainability in compliance with NUREG/CR-6463. System level preliminary hazard analysis (PHA) is performed by analyzing preliminary safety analysis report (PSAR) and FMEA document. The modularity concept is effectively implemented for the overall module configurations and functions using RTP software development tool. The response time imposed on the basis of the deterministic structure of the safety-critical software was measured

  19. Comparison and cost analysis of drinking water quality monitoring requirements versus practice in seven developing countries.

    Science.gov (United States)

    Crocker, Jonny; Bartram, Jamie

    2014-07-18

    Drinking water quality monitoring programs aim to support provision of safe drinking water by informing water quality management. Little evidence or guidance exists on best monitoring practices for low resource settings. Lack of financial, human, and technological resources reduce a country's ability to monitor water supply. Monitoring activities were characterized in Cambodia, Colombia, India (three states), Jordan, Peru, South Africa, and Uganda according to water sector responsibilities, monitoring approaches, and marginal cost. The seven study countries were selected to represent a range of low resource settings. The focus was on monitoring of microbiological parameters, such as E. coli, coliforms, and H2S-producing microorganisms. Data collection involved qualitative and quantitative methods. Across seven study countries, few distinct approaches to monitoring were observed, and in all but one country all monitoring relied on fixed laboratories for sample analysis. Compliance with monitoring requirements was highest for operational monitoring of large water supplies in urban areas. Sample transport and labor for sample collection and analysis together constitute approximately 75% of marginal costs, which exclude capital costs. There is potential for substantive optimization of monitoring programs by considering field-based testing and by fundamentally reconsidering monitoring approaches for non-piped supplies. This is the first study to look quantitatively at water quality monitoring practices in multiple developing countries.

  20. Requirement Analysis for the Collaborative Supply and Logistics Management of Fresh Agricultural Products

    Directory of Open Access Journals (Sweden)

    Li Jun

    2017-01-01

    Full Text Available Issues and concerns for food safety, agro-processing, and the environmental and ecological impact of food production have been attracted many research interests. Traceability and logistics management of fresh agricultural products is faced with the technological challenges including food product label and identification, activity/process characterization, information systems for the supply chain, i.e., from farm to table. Application of information technologies for food processing and logistics industry in the fields of smart packaging and materials, automation and control technology, standards and their application scenarios, and production management principles were wildly studied. A collaborative research project for the supply and logistics of fresh agricultural products in Tianjin was performed. System analysis for the logistics management information system is studied. The model-driven business transformation, an approach uses formal models to explicitly define the structure and behavior of a business, is applied for the review and analysis process. Requirements for the logistic management solutions are proposed. Development of this research is crucial for the solution integration of supply and logistic management information system for fresh agricultural products.

  1. Model Based User's Access Requirement Analysis of E-Governance Systems

    Science.gov (United States)

    Saha, Shilpi; Jeon, Seung-Hwan; Robles, Rosslin John; Kim, Tai-Hoon; Bandyopadhyay, Samir Kumar

    The strategic and contemporary importance of e-governance has been recognized across the world. In India too, various ministries of Govt. of India and State Governments have taken e-governance initiatives to provide e-services to citizens and the business they serve. To achieve the mission objectives, and make such e-governance initiatives successful it would be necessary to improve the trust and confidence of the stakeholders. It is assumed that the delivery of government services will share the same public network information that is being used in the community at large. In particular, the Internet will be the principal means by which public access to government and government services will be achieved. To provide the security measures main aim is to identify user's access requirement for the stakeholders and then according to the models of Nath's approach. Based on this analysis, the Govt. can also make standards of security based on the e-governance models. Thus there will be less human errors and bias. This analysis leads to the security architecture of the specific G2C application.

  2. Environmental Cost Analysis System (ECAS) Status and Compliance Requirements for EM Consolidated Business Center Contracts - 13204

    Energy Technology Data Exchange (ETDEWEB)

    Sanford, P.C. [Consultant, 11221 E. Cimmarron Dr., Englewood, CO 80111 (United States); Moe, M.A. [EMCBC Office of Cost Estimating and Analysis, United States Department of Energy, 250 E. 5th Street, Suite 500, Cincinnati, OH 45202 (United States); Hombach, W.G. [Team Analysis, Inc., 2 Cardinal Park Drive, Suite 105A, Leesburg, VA 20175 (United States); Urdangaray, R. [Project Performance Corporation, 1760 Old Meadow Road, McLean, VA 22102 (United States)

    2013-07-01

    The Department of Energy (DOE) Office of Environmental Management (EM) has developed a web-accessible database to collect actual cost data from completed EM projects to support cost estimating and analysis. This Environmental Cost Analysis System (ECAS) database was initially deployed in early 2009 containing the cost and parametric data from 77 decommissioning, restoration, and waste management projects completed under the Rocky Flats Closure Project. In subsequent years we have added many more projects to ECAS and now have a total of 280 projects from 8 major DOE sites. This data is now accessible to DOE users through a web-based reporting tool that allows users to tailor report outputs to meet their specific needs. We are using it as a principal resource supporting the EM Consolidated Business Center (EMCBC) and the EM Applied Cost Engineering (ACE) team cost estimating and analysis efforts across the country. The database has received Government Accountability Office review as supporting its recommended improvements in DOE's cost estimating process, as well as review from the DOE Office of Acquisition and Project Management (APM). Moving forward, the EMCBC has developed a Special Contract Requirement clause or 'H-Clause' to be included in all current and future EMCBC procurements identifying the process that contractors will follow to provide DOE their historical project data in a format compatible with ECAS. Changes to DOE O 413.3B implementation are also in progress to capture historical costs as part of the Critical Decision project closeout process. (authors)

  3. Engineering Analysis of Intermediate Loop and Process Heat Exchanger Requirements to Include Configuration Analysis and Materials Needs

    Energy Technology Data Exchange (ETDEWEB)

    T.M. Lillo; R.L. Williamson; T.R. Reed; C.B. Davis; D.M. Ginosar

    2005-09-01

    The need to locate advanced hydrogen production facilities a finite distance away from a nuclear power source necessitates the need for an intermediate heat transport loop (IHTL). This IHTL must not only efficiently transport energy over distances up to 500 meters but must also be capable of operating at high temperatures (>850oC) for many years. High temperature, long term operation raises concerns of material strength, creep resistance and general material stability (corrosion resistance). IHTL design is currently in the initial stages. Many questions remain to be answered before intelligent design can begin. The report begins to look at some of the issues surrounding the main components of an IHTL. Specifically, a stress analysis of a compact heat exchanger design under expected operating conditions is reported. Also the results of a thermal analysis performed on two ITHL pipe configurations for different heat transport fluids are presented. The configurations consist of separate hot supply and cold return legs as well as annular design in which the hot fluid is carried in an inner pipe and the cold return fluids travels in the opposite direction in the annular space around the hot pipe. The effects of insulation configurations on pipe configuration performance are also reported. Finally, a simple analysis of two different process heat exchanger designs, one a tube in shell type and the other a compact or microchannel reactor are evaluated in light of catalyst requirements. Important insights into the critical areas of research and development are gained from these analyses, guiding the direction of future areas of research.

  4. Hazard Analysis and Safety Requirements for Small Drone Operations: To What Extent Do Popular Drones Embed Safety?

    Science.gov (United States)

    Plioutsias, Anastasios; Karanikas, Nektarios; Chatzimihailidou, Maria Mikela

    2018-03-01

    Currently, published risk analyses for drones refer mainly to commercial systems, use data from civil aviation, and are based on probabilistic approaches without suggesting an inclusive list of hazards and respective requirements. Within this context, this article presents: (1) a set of safety requirements generated from the application of the systems theoretic process analysis (STPA) technique on a generic small drone system; (2) a gap analysis between the set of safety requirements and the ones met by 19 popular drone models; (3) the extent of the differences between those models, their manufacturers, and the countries of origin; and (4) the association of drone prices with the extent they meet the requirements derived by STPA. The application of STPA resulted in 70 safety requirements distributed across the authority, manufacturer, end user, or drone automation levels. A gap analysis showed high dissimilarities regarding the extent to which the 19 drones meet the same safety requirements. Statistical results suggested a positive correlation between drone prices and the extent that the 19 drones studied herein met the safety requirements generated by STPA, and significant differences were identified among the manufacturers. This work complements the existing risk assessment frameworks for small drones, and contributes to the establishment of a commonly endorsed international risk analysis framework. Such a framework will support the development of a holistic and methodologically justified standardization scheme for small drone flights. © 2017 Society for Risk Analysis.

  5. Employment of telemedicine in emergency medicine. Clinical requirement analysis, system development and first test results.

    Science.gov (United States)

    Czaplik, M; Bergrath, S; Rossaint, R; Thelen, S; Brodziak, T; Valentin, B; Hirsch, F; Beckers, S K; Brokmann, J C

    2014-01-01

    Demographic change, rising co-morbidity and an increasing number of emergencies are the main challenges that emergency medical services (EMS) in several countries worldwide are facing. In order to improve quality in EMS, highly trained personnel and well-equipped ambulances are essential. However several studies have shown a deficiency in qualified EMS physicians. Telemedicine emerges as a complementary system in EMS that may provide expertise and improve quality of medical treatment on the scene. Hence our aim is to develop and test a specific teleconsultation system. During the development process several use cases were defined and technically specified by medical experts and engineers in the areas of: system administration, start-up of EMS assistance systems, audio communication, data transfer, routine tele-EMS physician activities and research capabilities. Upon completion, technical field tests were performed under realistic conditions to test system properties such as robustness, feasibility and usability, providing end-to-end measurements. Six ambulances were equipped with telemedical facilities based on the results of the requirement analysis and 55 scenarios were tested under realistic conditions in one month. The results indicate that the developed system performed well in terms of usability and robustness. The major challenges were, as expected, mobile communication and data network availability. Third generation networks were only available in 76.4% of the cases. Although 3G (third generation), such as Universal Mobile Telecommunications System (UMTS), provides beneficial conditions for higher bandwidth, system performance for most features was also acceptable under adequate 2G (second generation) test conditions. An innovative concept for the use of telemedicine for medical consultations in EMS was developed. Organisational and technical aspects were considered and practical requirements specified. Since technical feasibility was demonstrated in these

  6. Requirements analysis notebook for the flight data systems definition in the Real-Time Systems Engineering Laboratory (RSEL)

    Science.gov (United States)

    Wray, Richard B.

    1991-01-01

    A hybrid requirements analysis methodology was developed, based on the practices actually used in developing a Space Generic Open Avionics Architecture. During the development of this avionics architecture, a method of analysis able to effectively define the requirements for this space avionics architecture was developed. In this methodology, external interfaces and relationships are defined, a static analysis resulting in a static avionics model was developed, operating concepts for simulating the requirements were put together, and a dynamic analysis of the execution needs for the dynamic model operation was planned. The systems engineering approach was used to perform a top down modified structured analysis of a generic space avionics system and to convert actual program results into generic requirements. CASE tools were used to model the analyzed system and automatically generate specifications describing the model's requirements. Lessons learned in the use of CASE tools, the architecture, and the design of the Space Generic Avionics model were established, and a methodology notebook was prepared for NASA. The weaknesses of standard real-time methodologies for practicing systems engineering, such as Structured Analysis and Object Oriented Analysis, were identified.

  7. Requirements analysis notebook for the flight data systems definition in the Real-Time Systems Engineering Laboratory (RSEL)

    Science.gov (United States)

    Wray, Richard B.

    1991-12-01

    A hybrid requirements analysis methodology was developed, based on the practices actually used in developing a Space Generic Open Avionics Architecture. During the development of this avionics architecture, a method of analysis able to effectively define the requirements for this space avionics architecture was developed. In this methodology, external interfaces and relationships are defined, a static analysis resulting in a static avionics model was developed, operating concepts for simulating the requirements were put together, and a dynamic analysis of the execution needs for the dynamic model operation was planned. The systems engineering approach was used to perform a top down modified structured analysis of a generic space avionics system and to convert actual program results into generic requirements. CASE tools were used to model the analyzed system and automatically generate specifications describing the model's requirements. Lessons learned in the use of CASE tools, the architecture, and the design of the Space Generic Avionics model were established, and a methodology notebook was prepared for NASA. The weaknesses of standard real-time methodologies for practicing systems engineering, such as Structured Analysis and Object Oriented Analysis, were identified.

  8. Identification of drug combinations administered by continuous subcutaneous infusion that require analysis for compatibility and stability.

    Science.gov (United States)

    Dickman, Andrew; Bickerstaff, Matthew; Jackson, Richard; Schneider, Jennifer; Mason, Stephen; Ellershaw, John

    2017-03-23

    A continuous subcutaneous infusion (CSCI) delivered via syringe pump is a method of drug administration used to maintain symptom control when a patient is no longer able to tolerate oral medication. Several classes of drugs, such as opioids, antiemetics, anticholinergics, antipsychotics and benzodiazepines are routinely administered by CSCI alone or in combinations. Previous studies attempting to identify the most-common CSCI combinations are now several years old and no longer reflect current clinical practice. The aim of this work was to review current clinical practice and identify CSCI drug combinations requiring analysis for chemical compatibility and stability. UK pharmacy professionals involved in the delivery of care to palliative patients in hospitals and hospices were invited to enter CSCI combinations comprised of two or more drugs onto an electronic database over a 12-month period. In addition, a separate Delphi study with a panel of 15 expert healthcare professionals was completed to identify a maximum of five combinations of drugs used to treat more complex, but less commonly encountered symptoms unlikely to be identified by the national survey. A total of 57 individuals representing 33 separate palliative care services entered 1,945 drug combinations suitable for analysis, with 278 discrete combinations identified. The top 40 drug combinations represented nearly two-thirds of combinations recorded. A total of 23 different drugs were administered in combination and the median number of drugs in a combination was three. The Delphi study identified five combinations for the relief of complex or refractory symptoms. This study represents the first step towards developing authoritative national guidance on the administration of drugs by CSCI. Further work will ensure healthcare practitioners have the knowledge and confidence that a prescribed combination will be both safe and efficacious.

  9. Analysis and Comparison of Various Requirements Management Tools for Use in the Shipbuilding Industry

    National Research Council Canada - National Science Library

    Clark, Eric D

    2006-01-01

    .... Some are clearly defined while many more are undefined. Some requirements have to be generated from the implication of other requirements while even more have to be pulled from other industry or military standards...

  10. Establishment of design and performance requirements using cost and systems analysis

    International Nuclear Information System (INIS)

    Waganer, L.M.; Carosella, L.A.; Defreece, D.A.

    1977-01-01

    The current uncertainty in design approach and performance requirements for a commercial fusion power plant poses a problem for the designer in configuring the plant and for the utilities in analyzing the attractiveness of a future fusion power plant. To provide direction and insight in this area, a systems analysis model was constructed at McDonnell Douglas, utilizing fusion subsystem algorithms with subsystem cost estimating relationships into a self-consistent computerized model for several fusion reactor concepts. Cost estimating data has been compiled by utilizing McDonnell Douglas' experience in fabricating large, complex metal assemblies and soliciting the accumulated store of knowledge in existing power plants and new emerging technologies such as the Clinch River Breeder Reactor. Using the computer model, sensitivities to plasma, reactor and plant parameters are a few of the options that have been evaluated to yield recommended concepts/techniques/solutions. This is a very beneficial tool in assessing the impact of the fusion reactor on the electrical power community and charting the optimum developmental approach

  11. Testing to fulfill HACCP (Hazard Analysis Critical Control Points) requirements: principles and examples.

    Science.gov (United States)

    Gardner, I A

    1997-12-01

    On-farm HACCP (hazard analysis critical control points) monitoring requires cost-effective, yet accurate and reproducible tests that can determine the status of cows, milk, and the dairy environment. Tests need to be field-validated, and their limitations need to be established so that appropriate screening strategies can be initiated and test results can be rationally interpreted. For infections and residues of low prevalence, tests or testing strategies that are highly specific help to minimize false-positive results and excessive costs to the dairy industry. The determination of the numbers of samples to be tested in HACCP monitoring programs depends on the specific purpose of the test and the likely prevalence of the agent or residue at the critical control point. The absence of positive samples from a herd test should not be interpreted as freedom from a particular agent or residue unless the entire herd has been tested with a test that is 100% sensitive. The current lack of field-validated tests for most of the chemical and infectious agents of concern makes it difficult to ensure that the stated goals of HACCP programs are consistently achieved.

  12. Resolution requirements for monitor viewing of digital flat-panel detector radiographs: a contrast detail analysis

    International Nuclear Information System (INIS)

    Peer, Siegfried; Giacomuzzi, Salvatore M.; Peer, Regina; Gassner, Eva; Steingruber, Iris; Jaschke, Werner

    2003-01-01

    With the introduction of digital flat-panel detector systems into clinical practice, the still unresolved question of resolution requirements for picture archiving communication system (PACS) workstation monitors has gained new momentum. This contrast detail analysis was thus performed to define the differences in observer performance in the detection of small low-contrast objects on clinical 1K and 2K monitor workstations. Images of the CDRAD 2.0 phantom were acquired at varying exposures on an indirect-type digital flat-panel detector. Three observers evaluated a total of 15 images each with respect to the threshold contrast for each detail size. The numbers of correctly identified objects were determined for all image subsets. No significant difference in the correct detection ratio was detected among the observers; however, the difference between the two types of workstations (1K vs 2K monitors) despite less than 3% was significant at a 95% confidence level. Slight but statistically significant differences exist in the detection of low-contrast nodular details visualized on 1K- and 2K-monitor workstations. Further work is needed to see if this result holds true also for comparison of clinical flat-panel detector images and may, for example, exert an influence on the diagnostic accuracy of chest X-ray readings. (orig.)

  13. Analysis of parallel optical sampling rate and ADC requirements in digital coherent receivers

    DEFF Research Database (Denmark)

    Lorences Riesgo, Abel; Galili, Michael; Peucheret, Christophe

    2012-01-01

    We comprehensively assess analog-to-digital converter requirements in coherent digital receiver schemes with parallel optical sampling. We determine the electronic requirements in accordance with the properties of the free running local oscillator.......We comprehensively assess analog-to-digital converter requirements in coherent digital receiver schemes with parallel optical sampling. We determine the electronic requirements in accordance with the properties of the free running local oscillator....

  14. The Requirement of a Positive Definite Covariance Matrix of Security Returns for Mean-Variance Portfolio Analysis: A Pedagogic Illustration

    Directory of Open Access Journals (Sweden)

    Clarence C. Y. Kwan

    2010-07-01

    Full Text Available This study considers, from a pedagogic perspective, a crucial requirement for the covariance matrix of security returns in mean-variance portfolio analysis. Although the requirement that the covariance matrix be positive definite is fundamental in modern finance, it has not received any attention in standard investment textbooks. Being unaware of the requirement could cause confusion for students over some strange portfolio results that are based on seemingly reasonable input parameters. This study considers the requirement both informally and analytically. Electronic spreadsheet tools for constrained optimization and basic matrix operations are utilized to illustrate the various concepts involved.

  15. Analysis of requirements and the necessary investments in the railway station adjustment program for persons with special needs

    Directory of Open Access Journals (Sweden)

    Atanasković Predrag

    2012-03-01

    Full Text Available People with special needs from the standpoint of social communities have specific requirements for access, mobility, entry and exit of railway vehicles designated to transport passengers. The EU has defined standards and requirements related to persons with special needs. The aim of this paper is to analyze the technical requirements of equipment and identify the necessary investment funds related to the increasing mobility of persons with special needs in the rail transportation system. This analysis would be one of the initial steps approaching the conditions and requirements that apply in the EU in adapting the system of transport for people with special needs.

  16. ANALYSIS OF MODERN REQUIREMENTS FOR THE LEVEL OF FOREIGN LANGUAGE PROFICIENCY OF ENGINEERING SPECIALISTS

    Directory of Open Access Journals (Sweden)

    K. M. Inozemtseva

    2017-01-01

    Full Text Available Introduction. At present, in Russian higher professional education we can observe a shift to the new educational paradigm based on Professional Standards (PS. According to the Federal Law of 02.05.2015 № 122 «About amendments to the Labour Code of Russian Federation and the articles 11 and 73 of «The Law on Education in Russian Federation» formation of the Federal State Educational Standards of Higher Education requirements for expected learning outcomes on universities’ main educational programs is implemented on the basis of relevant Professional Standards. This causes necessity of work on conjunction of Professional Standards, Federal State Educational Standards and universities’ main educational programs.The aim of this article is to demonstrate the influence of a new educational paradigm on the choice of contents, technologies and activities used in foreign language teaching at Russian technical universities.Methodology and research methods. The research methodology is based on the concept of diversification of engineers’ continuous professional foreign language training (T. Yu. Polyakova. In view of priority value of PS for developing universities’ main educational programs the updating of the above concept needs thorough analysis of both PS requirements for the level of foreign language proficiency of engineering specialists and study of scientific literature on the above problem.Results. This research results in interpretation and clarification of generalized PS requirements for the actual needs of industries and individuals in foreign language proficiency. The research also causes Language for Specific Purposes (LSP program developers’ and LSP teachers’ pedagogical reflection about their readiness to form foreign language (FL professional communicative competence of an engineer. It is concluded that a teacher needs to consider axiological aspects of engineering activity in order to understand the nature of the work

  17. Transforming user needs into functional requirements for an antibiotic clinical decision support system: explicating content analysis for system design.

    Science.gov (United States)

    Bright, T J

    2013-01-01

    Many informatics studies use content analysis to generate functional requirements for system development. Explication of this translational process from qualitative data to functional requirements can strengthen the understanding and scientific rigor when applying content analysis in informatics studies. To describe a user-centered approach transforming emergent themes derived from focus group data into functional requirements for informatics solutions and to illustrate these methods to the development of an antibiotic clinical decision support system (CDS). THE APPROACH CONSISTED OF FIVE STEPS: 1) identify unmet therapeutic planning information needs via Focus Group Study-I, 2) develop a coding framework of therapeutic planning themes to refine the domain scope to antibiotic therapeutic planning, 3) identify functional requirements of an antibiotic CDS system via Focus Group Study-II, 4) discover informatics solutions and functional requirements from coded data, and 5) determine the types of information needed to support the antibiotic CDS system and link with the identified informatics solutions and functional requirements. The coding framework for Focus Group Study-I revealed unmet therapeutic planning needs. Twelve subthemes emerged and were clustered into four themes; analysis indicated a need for an antibiotic CDS intervention. Focus Group Study-II included five types of information needs. Comments from the Barrier/Challenge to information access and Function/Feature themes produced three informatics solutions and 13 functional requirements of an antibiotic CDS system. Comments from the Patient, Institution, and Domain themes generated required data elements for each informatics solution. This study presents one example explicating content analysis of focus group data and the analysis process to functional requirements from narrative data. Illustration of this 5-step method was used to develop an antibiotic CDS system, resolving unmet antibiotic prescribing

  18. Meeting the measurement uncertainty and traceability requirements of ISO/AEC standard 17025 in chemical analysis.

    Science.gov (United States)

    King, B

    2001-11-01

    The new laboratory accreditation standard, ISO/IEC 17025, reflects current thinking on good measurement practice by requiring more explicit and more demanding attention to a number of activities. These include client interactions, method validation, traceability, and measurement uncertainty. Since the publication of the standard in 1999 there has been extensive debate about its interpretation. It is the author's view that if good quality practices are already in place and if the new requirements are introduced in a manner that is fit for purpose, the additional work required to comply with the new requirements can be expected to be modest. The paper argues that the rigour required in addressing the issues should be driven by customer requirements and the factors that need to be considered in this regard are discussed. The issues addressed include the benefits, interim arrangements, specifying the analytical requirement, establishing traceability, evaluating the uncertainty and reporting the information.

  19. An Analysis of BIM Web Service Requirements and Design to Support Energy Efficient Building Lifecycle

    Directory of Open Access Journals (Sweden)

    Yufei Jiang

    2016-04-01

    Full Text Available Energy Efficient Building (EEB design, construction, and operations require the development and sharing of building information among different individuals, organizations, and computer applications. The Representational State Transfer (RESTful Building Information Modeling (BIM web service is a solution to enable an effective exchange of data. This paper presents an investigation into the core RESTful web service requirements needed to effectively support the EEB project lifecycle. The requirements include information exchange requirements, distributed collaboration requirements, internal data storage requirements, and partial model query requirements. We also propose a RESTful web service design model on different abstraction layers to enhance the BIM lifecycle in energy efficient building design. We have implemented a RESTful Application Program Interface (API prototype on a mock BIMserver to demonstrate our idea. We evaluate our design by conducting a user study based on the Technology Acceptance Model (TAM. The results show that our design can enhance the efficiency of data exchange in EEB design scenarios.

  20. An analysis of cross-sectional variations in total household energy requirements in India using micro survey data

    International Nuclear Information System (INIS)

    Pachauri, Shonali

    2004-01-01

    Using micro level household survey data from India, we analyse the variation in the pattern and quantum of household energy requirements, both direct and indirect, and the factors causing such variation. An econometric analysis using household survey data from India for the year 1993-1994 reveals that household socio-economic, demographic, geographic, family and dwelling attributes influence the total household energy requirements. There are also large variations in the pattern of energy requirements across households belonging to different expenditure classes. Results from the econometric estimation show that total household expenditure or income level is the most important explanatory variable causing variation in energy requirements across households. In addition, the size of the household dwelling and the age of the head of the household are related to higher household energy requirements. In contrast, the number of members in the household and literacy of the head are associated with lower household energy requirements

  1. An analysis of cross-sectional variations in total household energy requirements in India using micro survey data

    Energy Technology Data Exchange (ETDEWEB)

    Pachauri, Shonali E-mail: shonali.pachauri@cepe.mavt.ethz.ch

    2004-10-01

    Using micro level household survey data from India, we analyse the variation in the pattern and quantum of household energy requirements, both direct and indirect, and the factors causing such variation. An econometric analysis using household survey data from India for the year 1993-1994 reveals that household socio-economic, demographic, geographic, family and dwelling attributes influence the total household energy requirements. There are also large variations in the pattern of energy requirements across households belonging to different expenditure classes. Results from the econometric estimation show that total household expenditure or income level is the most important explanatory variable causing variation in energy requirements across households. In addition, the size of the household dwelling and the age of the head of the household are related to higher household energy requirements. In contrast, the number of members in the household and literacy of the head are associated with lower household energy requirements.

  2. Spatial resolution requirements in digital radiography of scaphoid fractures. An ROC analysis

    International Nuclear Information System (INIS)

    Jonsson, A.; Laurin, S.; Karner, G.; Herrlin, K.; Hochbergs, P.; Jonsson, K.; Rudling, O.; Sandstroem, S.; Sloth, M.; Svahn, G.; Pettersson, H.

    1996-01-01

    Purpose: To investigate the spatial resolution requirements in digital radiography of scaphoid fractures. Material and Methods: Included in the study were 60 scaphoid radiographs with and 60 without fractures of the scaphoid bone. The film-screen images were digitized using pixel sizes of 115, 170, and 340 μm along with 170 μm with a 10:1 wavelet compression. The digital images were displayed on a 1280 x 1024 x 8 bits monitor, and 5 observers evaluated the images in 5 randomized sessions. The results for each pixel size were then compared to the film-screen images by ROC analysis. Results: The mean area under the ROC curves was larger for the film-screen images than for the digital images at all resolutions. However, this difference was not significant when the areas under the ROC curves for the film-screen images were compared to the digital images of 115, 170, and 170 μm with 10:1 compression. There was a significant difference for the 340-μm pixel size in favour of the film-screen images. The mean ROC curves for the digital images were very similar for the 115 and 170 μm pixel sizes, although slightly better for 115 μm. At 170 μm, the compression seemed to have a relatively small negative effect on the diagnostic performance; the deterioration was greater when the pixel size was increased to 340 μm. There was no obvious correlation between diagnostic performance and the experience of the observers in using workstations. Conclusions: The pixel size of 170 μm is adequate for the detection of subtle fractures, even after wavelet compression by a ratio of 10:1. (orig.)

  3. Connecting Requirements to Architecture and Analysis via Model-Based Systems Engineering

    Science.gov (United States)

    Cole, Bjorn F.; Jenkins, J. Steven

    2015-01-01

    In traditional systems engineering practice, architecture, concept development, and requirements development are related but still separate activities. Concepts for operation, key technical approaches, and related proofs of concept are developed. These inform the formulation of an architecture at multiple levels, starting with the overall system composition and functionality and progressing into more detail. As this formulation is done, a parallel activity develops a set of English statements that constrain solutions. These requirements are often called "shall statements" since they are formulated to use "shall." The separation of requirements from design is exacerbated by well-meaning tools like the Dynamic Object-Oriented Requirements System (DOORS) that remained separated from engineering design tools. With the Europa Clipper project, efforts are being taken to change the requirements development approach from a separate activity to one intimately embedded in formulation effort. This paper presents a modeling approach and related tooling to generate English requirement statements from constraints embedded in architecture definition.

  4. Supplement to safety analysis report. 306-W building operations safety requirement

    International Nuclear Information System (INIS)

    Richey, C.R.

    1979-08-01

    The operations safety requirements (OSRs) presented in this report define the conditions, safe boundaries, and management control needed for safely conducting operations with radioactive materials in the Pacific Northwest Laboratory (PNL) 306-W building. The safety requirements are organized in five sections. Safety limits are safety-related process variables that are observable and measurable. Limiting conditions cover: equipment and technical conditions and characteristics of the facility and operations necessary for continued safe operation. Surveillance requirements prescribe the requirements for checking systems and components that are essential to safety. Equipment design controls require that changes to process equipment and systems be independently checked and approved to assure that the changes will have no adverse effect on safety. Administrative controls describe and discuss the organization and administrative systems and procedures to be used for safe operation of the facility. Details of the implementation of the operations safety requirements are prescribed by internal PNL documents such as criticality safety specifications and radiation work procedures

  5. Guide for reviewing safety analysis reports for packaging: Review of quality assurance requirements

    International Nuclear Information System (INIS)

    Moon, D.W.

    1988-10-01

    This review section describes quality assurance requirements applying to design, purchase, fabrication, handling, shipping, storing, cleaning, assembly, inspection, testing, operation, maintenance, repair, and modification of components of packaging which are important to safety. The design effort, operation's plans, and quality assurance requirements should be integrated to achieve a system in which the independent QA program is not overly stringent and the application of QA requirements is commensurate with safety significance. The reviewer must verify that the applicant's QA section in the SARP contains package-specific QA information required by DOE Orders and federal regulations that demonstrate compliance. 8 refs

  6. Requirements of data acquisition and analysis for condensed matter studies at the weapons neutron research/proton storage ring facility

    International Nuclear Information System (INIS)

    Johnson, M.W.; Goldstone, J.A.; Taylor, A.D.

    1982-11-01

    With the completion of the proton storage ring (PSR) in 1985, the subsquent increase in neutron flux, and the continuing improvement in neutron scattering instruments, a significant improvement in data acquisition and data analysis capabilities will be required. A brief account of the neutron source is given together with the associated neutron scattering instruments. Based on current technology and operating instruments, a projection for 1985 to 1990 of the neutron scattering instruments and their main parameters are given. From the expected data rates and the projected instruments, the size of data storage is estimated and the user requirements are developed. General requirements are outlined with specific requirements in user hardware and software stated. A project time scale to complete the data acquisition and analysis system by 1985 is given

  7. Analysis of impact of noncompliance with physical-security requirements at nuclear facilities

    International Nuclear Information System (INIS)

    Green, J.N.

    1982-03-01

    Inspectors are required to analyze the impact of instances of noncompliance with physical security requirements at licensed nuclear facilities. A scoring procedure for components and a method for evaluating the effectiveness of the subsystems involved are proposed to reinforce an inspector's judgment about the remaining level of safeguards

  8. A Framework for Requirement Elicitation, Analysis, Documentation and Prioritisation under Uncertainty

    NARCIS (Netherlands)

    Rajabali Nejad, Mohammadreza; Mladenov, V.

    2015-01-01

    This paper offers a pluralistic framework for coping with requirements in the early phases of design where there is lack of knowledge about a system, its architect and functions. The framework is used to elicit, analyze, document and prioritize the requirements. It embeds probabilistic approach and

  9. Model-Based Requirements Analysis for Reactive Systems with UML Sequence Diagrams and Coloured Petri Nets

    DEFF Research Database (Denmark)

    Tjell, Simon; Lassen, Kristian Bisgaard

    2008-01-01

    In this paper, we describe a formal foundation for a specialized approach to automatically checking traces against real-time requirements. The traces are obtained from simulation of Coloured Petri Net (CPN) models of reactive systems. The real-time requirements are expressed in terms of a derivat...

  10. Fuel requirements for experimental devices in MTR reactors. A perturbation model for reactor core analysis

    International Nuclear Information System (INIS)

    Beeckmans de West-Meerbeeck, A.

    1991-01-01

    Irradiation in neutron absorbing devices, requiring high fast neutron fluxes in the core or high thermal fluxes in the reflector and flux traps, lead to higher density fuel and larger core dimensions. A perturbation model of the reactor core helps to estimate the fuel requirements. (orig.)

  11. From Collective Knowledge to Intelligence : Pre-Requirements Analysis of Large and Complex Systems

    NARCIS (Netherlands)

    Liang, Peng; Avgeriou, Paris; He, Keqing; Xu, Lai

    2010-01-01

    Requirements engineering is essentially a social collaborative activity in which involved stakeholders have to closely work together to communicate, elicit, negotiate, define, confirm, and finally come up with the requirements for the system to be implemented or upgraded. In the development of large

  12. Technical report on comparative analysis of ASME QA requirements and ISO series

    International Nuclear Information System (INIS)

    Kim, Kwan Hyun

    2000-06-01

    This technical report provides the differences on the QA requirement ASME and ISO in nuclear fields. This report applies to the quality assurance(QA) programmes of the design of two requirement. The organization having overall responsibility for the nuclear design, preservation, fabrication shall be described in this report in each stage of design project

  13. Information Operations - Analysis Support and Capability Requirements (Operations d'information - Soutien a l'analyse et exigences de capacites) (CD-ROM)

    National Research Council Canada - National Science Library

    2006-01-01

    ...: The focus of the study "Information Operations - Analysis Support and Capability Requirements" undertaken by the RTO Task Group SAS-057 was to provide recommendations to improve analysis support...

  14. Analysis of regulatory requirement for beyond design basis events of SMART

    International Nuclear Information System (INIS)

    Kim, W. S.; Seol, K. W.

    2000-01-01

    To enhance the safety of SMART reactor, safety and regulatory requirements associated with beyond design basis events (beyond BDE), which were developed and applied to advanced light water reactor designs, were analyzed along with a design status of passive reactor. And, based on these requirements, their applicability on the SMART design was evaluated. In the design aspect, severe accident prevention and mitigation features, containment performance, and accident management were analyzed. The evaluation results show that the requirement related to beyond DBE such as ATWS, loss of residual heat removal during shutdown operation, station blackout, fire, inter-system LOCA, and well-known events from severe accident phenomena is applicable to the SMART design. However, comprehensive approach against beyond DBE is not yet provided in the SMART design, and then it is required to designate and analyze the beyond DBE-related features. This study is expected to contribute to efforts to improve plant safety and to establish regulatory requirements for safety review

  15. Evaluation of data requirements for computerized constructability analysis of pavement rehabilitation projects.

    Science.gov (United States)

    2013-08-01

    This research aimed to evaluate the data requirements for computer assisted construction planning : and staging methods that can be implemented in pavement rehabilitation projects in the state of : Georgia. Results showed that two main issues for the...

  16. Analysis of requirements for accelerating the development of geothermal energy resources in California

    Science.gov (United States)

    Fredrickson, C. D.

    1978-01-01

    Various resource data are presented showing that geothermal energy has the potential of satisfying a singificant part of California's increasing energy needs. General factors slowing the development of geothermal energy in California are discussed and required actions to accelerate its progress are presented. Finally, scenarios for developing the most promising prospects in the state directed at timely on-line power are given. Specific actions required to realize each of these individual scenarios are identified.

  17. Satellite-enabled educational services specification and requirements analysis based on user feedback

    OpenAIRE

    Tsekeridou, Sofia; Tiropanis, Thanassis; Rorris, Dimitris; Constantinos, Makropoulos; Serif, Tacha; Stergioulas, Lampros

    2008-01-01

    Advanced tele-education services provision in remote geographically dispersed user communities (such as agriculture and maritime), based on the specific needs and requirements of such communities, implies significant infrastructural and broadband connectivity requirements for rich media, timely and quality-assured content delivery and interactivity. The solution to broadband access anywhere is provided by satellite-enabled communication infrastructures. This paper aims to present such satelli...

  18. Data Quality Objectives for Regulatory Requirements for Dangerous Waste Sampling and Analysis

    International Nuclear Information System (INIS)

    MULKEY, C.H.

    1999-01-01

    This document describes sampling and analytical requirements needed to meet state and federal regulations for dangerous waste (DW). The River Protection Project (RPP) is assigned to the task of storage and interim treatment of hazardous waste. Any final treatment or disposal operations, as well as requirements under the land disposal restrictions (LDRs), fall in the jurisdiction of another Hanford organization and are not part of this scope. The requirements for this Data Quality Objective (DQO) Process were developed using the RPP Data Quality Objective Procedure (Banning 1996), which is based on the U.S. Environmental Protection Agency's (EPA) Guidance for the Data Quality Objectives Process (EPA 1994). Hereafter, this document is referred to as the DW DQO. Federal and state laws and regulations pertaining to waste contain requirements that are dependent upon the composition of the waste stream. These regulatory drivers require that pertinent information be obtained. For many requirements, documented process knowledge of a waste composition can be used instead of analytical data to characterize or designate a waste. When process knowledge alone is used to characterize a waste, it is a best management practice to validate the information with analytical measurements

  19. Data Quality Objectives for Regulatory Requirements for Dangerous Waste Sampling and Analysis; FINAL

    International Nuclear Information System (INIS)

    MULKEY, C.H.

    1999-01-01

    This document describes sampling and analytical requirements needed to meet state and federal regulations for dangerous waste (DW). The River Protection Project (RPP) is assigned to the task of storage and interim treatment of hazardous waste. Any final treatment or disposal operations, as well as requirements under the land disposal restrictions (LDRs), fall in the jurisdiction of another Hanford organization and are not part of this scope. The requirements for this Data Quality Objective (DQO) Process were developed using the RPP Data Quality Objective Procedure (Banning 1996), which is based on the U.S. Environmental Protection Agency's (EPA) Guidance for the Data Quality Objectives Process (EPA 1994). Hereafter, this document is referred to as the DW DQO. Federal and state laws and regulations pertaining to waste contain requirements that are dependent upon the composition of the waste stream. These regulatory drivers require that pertinent information be obtained. For many requirements, documented process knowledge of a waste composition can be used instead of analytical data to characterize or designate a waste. When process knowledge alone is used to characterize a waste, it is a best management practice to validate the information with analytical measurements

  20. Uncertainty Requirement Analysis for the Orbit, Attitude, and Burn Performance of the 1st Lunar Orbit Insertion Maneuver

    Directory of Open Access Journals (Sweden)

    Young-Joo Song

    2016-12-01

    Full Text Available In this study, the uncertainty requirements for orbit, attitude, and burn performance were estimated and analyzed for the execution of the 1st lunar orbit insertion (LOI maneuver of the Korea Pathfinder Lunar Orbiter (KPLO mission. During the early design phase of the system, associate analysis is an essential design factor as the 1st LOI maneuver is the largest burn that utilizes the onboard propulsion system; the success of the lunar capture is directly affected by the performance achieved. For the analysis, the spacecraft is assumed to have already approached the periselene with a hyperbolic arrival trajectory around the moon. In addition, diverse arrival conditions and mission constraints were considered, such as varying periselene approach velocity, altitude, and orbital period of the capture orbit after execution of the 1st LOI maneuver. The current analysis assumed an impulsive LOI maneuver, and two-body equations of motion were adapted to simplify the problem for a preliminary analysis. Monte Carlo simulations were performed for the statistical analysis to analyze diverse uncertainties that might arise at the moment when the maneuver is executed. As a result, three major requirements were analyzed and estimated for the early design phase. First, the minimum requirements were estimated for the burn performance to be captured around the moon. Second, the requirements for orbit, attitude, and maneuver burn performances were simultaneously estimated and analyzed to maintain the 1st elliptical orbit achieved around the moon within the specified orbital period. Finally, the dispersion requirements on the B-plane aiming at target points to meet the target insertion goal were analyzed and can be utilized as reference target guidelines for a mid-course correction (MCC maneuver during the transfer. More detailed system requirements for the KPLO mission, particularly for the spacecraft bus itself and for the flight dynamics subsystem at the ground

  1. Evaluation of a Game to Teach Requirements Collection and Analysis in Software Engineering at Tertiary Education Level

    Science.gov (United States)

    Hainey, Thomas; Connolly, Thomas M.; Stansfield, Mark; Boyle, Elizabeth A.

    2011-01-01

    A highly important part of software engineering education is requirements collection and analysis which is one of the initial stages of the Database Application Lifecycle and arguably the most important stage of the Software Development Lifecycle. No other conceptual work is as difficult to rectify at a later stage or as damaging to the overall…

  2. The Prediction of Job Ability Requirements Using Attribute Data Based Upon the Position Analysis Questionnaire (PAQ). Technical Report No. 1.

    Science.gov (United States)

    Shaw, James B.; McCormick, Ernest J.

    The study was directed towards the further exploration of the use of attribute ratings as the basis for establishing the job component validity of tests, in particular by using different methods of combining "attribute-based" data with "job analysis" data to form estimates of the aptitude requirements of jobs. The primary focus…

  3. Teaching Case: IS Security Requirements Identification from Conceptual Models in Systems Analysis and Design: The Fun & Fitness, Inc. Case

    Science.gov (United States)

    Spears, Janine L.; Parrish, James L., Jr.

    2013-01-01

    This teaching case introduces students to a relatively simple approach to identifying and documenting security requirements within conceptual models that are commonly taught in systems analysis and design courses. An introduction to information security is provided, followed by a classroom example of a fictitious company, "Fun &…

  4. DOE Integrated Safeguards and Security (DISS) historical document archival and retrieval analysis, requirements and recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Guyer, H.B.; McChesney, C.A.

    1994-10-07

    The overall primary Objective of HDAR is to create a repository of historical personnel security documents and provide the functionality needed for archival and retrieval use by other software modules and application users of the DISS/ET system. The software product to be produced from this specification is the Historical Document Archival and Retrieval Subsystem The product will provide the functionality to capture, retrieve and manage documents currently contained in the personnel security folders in DOE Operations Offices vaults at various locations across the United States. The long-term plan for DISS/ET includes the requirement to allow for capture and storage of arbitrary, currently undefined, clearance-related documents that fall outside the scope of the ``cradle-to-grave`` electronic processing provided by DISS/ET. However, this requirement is not within the scope of the requirements specified in this document.

  5. Requirement analysis for an electronic laboratory notebook for sustainable data management in biomedical research.

    Science.gov (United States)

    Menzel, Julia; Weil, Philipp; Bittihn, Philip; Hornung, Daniel; Mathieu, Nadine; Demiroglu, Sara Y

    2013-01-01

    Sustainable data management in biomedical research requires documentation of metadata for all experiments and results. Scientists usually document research data and metadata in laboratory paper notebooks. An electronic laboratory notebook (ELN) can keep metadata linked to research data resulting in a better understanding of the research results, meaning a scientific benefit [1]. Besides other challenges [2], the biggest hurdles for introducing an ELN seem to be usability, file formats, and data entry mechanisms [3] and that many ELNs are assigned to specific research fields such as biology, chemistry, or physics [4]. We aimed to identify requirements for the introduction of ELN software in a biomedical collaborative research center [5] consisting of different scientific fields and to find software fulfilling most of these requirements.

  6. Requirements Engineering and Analysis Workshop Proceedings Held in Pittsburgh, Pennsylvania on 12-14 March 1991

    Science.gov (United States)

    1991-12-01

    urally. 6.5 Summary of Current or Potential Approaches Many approaches to context analysis were discussed by the group, including: * Causal Trees * SWOT ... Apple Computer, 1988 1 Aseltine, J., Beam, W.R., Palmer, J.D., Sage, A.P., 1989, Introduction To Computer Systems: Analysis, Design and Application

  7. Classification of the railway accident in accordance with the requirement of the safety analysis of transporting spent fuel

    International Nuclear Information System (INIS)

    Wu Tao

    1993-01-01

    Based on the analysis of the difference between the accident severity categorization used in the Ministry of Railway and that used in the safety analysis of the transporting spent fuel, a method used for the classification of the railway accident in accordance with the requirement of the safety analysis of transporting spent fuel is suggested. The method classifies the railway accidents into 10 scenarios and make it possible to scale the accident through directly using the data documented by the Ministry of Railway without any additional effort

  8. IDENTIFICATION OF MEASUREMENT ITEMS OF DESIGN REQUIREMENTS FOR LEAN AND AGILE SUPPLY CHAIN-CONFIRMATORY FACTOR ANALYSIS

    Directory of Open Access Journals (Sweden)

    D.Venkata Ramana

    2013-06-01

    Full Text Available This study examines the consistency approaches by confirmatory factor analysis that determines the construct validity, convergent validity, construct reliability and internal consistency of the items of strategic design requirements. The design requirements includes use of information technology, sourcing procedures, new product development, flexible manufacturing functions and demand management supply chain net work design, management, commitment and inventory management policies among manufacturers of volatile and unforeseeable products in Andhraadesh, India. This study suggested that the seven factor model with 20 items of the leagile supply chain design requirements had a good fit. Further, the study showed a val id and reliable measurement to identify critical items among the design requirements of leagile supply chains.

  9. IEEE standard requirements for reliability analysis in the design and operation of safety systems for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    The purpose of this standard is to provide uniform, minimum acceptable requirements for the performance of reliability analyses for safety-related systems found in nuclear-power generating stations, but not to define the need for an analysis. The need for reliability analysis has been identified in other standards which expand the requirements of regulations (e.g., IEEE Std 379-1972 (ANSI N41.2-1972), ''Guide for the Application of the Single-Failure Criterion to Nuclear Power Generating Station Protection System,'' which describes the application of the single-failure criterion). IEEE Std 352-1975, ''Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Protection Systems,'' provides guidance in the application and use of reliability techniques referred to in this standard

  10. Power Consumption and Calculation Requirement Analysis of AES for WSN IoT.

    Science.gov (United States)

    Hung, Chung-Wen; Hsu, Wen-Ting

    2018-05-23

    Because of the ubiquity of Internet of Things (IoT) devices, the power consumption and security of IoT systems have become very important issues. Advanced Encryption Standard (AES) is a block cipher algorithm is commonly used in IoT devices. In this paper, the power consumption and cryptographic calculation requirement for different payload lengths and AES encryption types are analyzed. These types include software-based AES-CB, hardware-based AES-ECB (Electronic Codebook Mode), and hardware-based AES-CCM (Counter with CBC-MAC Mode). The calculation requirement and power consumption for these AES encryption types are measured on the Texas Instruments LAUNCHXL-CC1310 platform. The experimental results show that the hardware-based AES performs better than the software-based AES in terms of power consumption and calculation cycle requirements. In addition, in terms of AES mode selection, the AES-CCM-MIC64 mode may be a better choice if the IoT device is considering security, encryption calculation requirement, and low power consumption at the same time. However, if the IoT device is pursuing lower power and the payload length is generally less than 16 bytes, then AES-ECB could be considered.

  11. User requirement analysis of social conventions learning applications for Non-natives and low-literates

    NARCIS (Netherlands)

    Schouten, D.; Smets, N.; Driessen, M.; Hanekamp, M.; Cremers, A.H.M.; Neerincx, M.A.

    2013-01-01

    Learning and acting on social conventions is problematic for low-literates and non-natives, causing problems with societal participation and citizenship. Using the Situated Cognitive Engineering method, requirements for the design of social conventions learning software are derived from demographic

  12. An Analysis of Marine Corps Beyond Line of Sight Wideband Satellite Communications Requirements

    Science.gov (United States)

    2010-09-01

    Tactical SHF Satellite Terminal UFO ... what made it bearable. Stephen Musick: Thanks are due to my family and friends for their support and encouragement. I want to especially thank... what beyond LOS WB SATCOM capabilities the USMC requires in order to prepare for the future. A clear understanding of desired capabilities allows for

  13. The analysis of normative requirements to materials of PWR components, basing on LBB concepts

    International Nuclear Information System (INIS)

    Anikovsky, V.V.; Karzov, G.P.; Timofeev, B.T.

    1997-01-01

    The paper discusses the advisability of the correction of Norms to solve in terms of material science the Problem: how the normative requirements to materials must be changed in terms of the concept open-quotes leak before breakclose quotes (LBB)

  14. The analysis of normative requirements to materials of PWR components, basing on LBB concepts

    Energy Technology Data Exchange (ETDEWEB)

    Anikovsky, V.V.; Karzov, G.P.; Timofeev, B.T. [CRISM Prometey, St. Petersburg (Russian Federation)

    1997-04-01

    The paper discusses the advisability of the correction of Norms to solve in terms of material science the Problem: how the normative requirements to materials must be changed in terms of the concept {open_quotes}leak before break{close_quotes} (LBB).

  15. 40 CFR 158.2120 - Microbial pesticides product analysis data requirements table.

    Science.gov (United States)

    2010-07-01

    ... Certification of limits R MP EP -- Physical and Chemical Characteristics 830.6302 Color R TGAI TGAI -- 830.6303....6319 Miscibility R MP EP 2 830.6320 Corrosion Characteristics R MP EP 3 830.7000 pH R TGAI TGAI -- 830... pesticides are packaged in metal, plastic, or paper containers. 4. Only required for liquid forms of...

  16. Hazard analysis & safety requirements for small drone operations : to what extent do popular drones embed safety?

    NARCIS (Netherlands)

    Plioutsias, Anastasios; Karanikas, Nektarios; Chatzimichailidou, Maria Mikela

    2018-01-01

    Currently, published risk analyses for drones refer mainly to commercial systems, use data from civil aviation, and are based on probabilistic approaches without suggesting an inclusive list of hazards and respective requirements. Within this context, this paper presents: (1) a set of safety

  17. Requirements analysis of the VoD application using the tools in TRADE

    NARCIS (Netherlands)

    Wieringa, Roelf J.; Huyts, Sander

    1996-01-01

    This report contains a specification of requirements for a video-on-demand (VoD) application developed at Belgacom, used as a trial application in the 2RARE project. The specification contains three parts: an informal specification in natural language; a semiformal specification consisting of a

  18. Sensitivity Analysis and Requirements for Temporally and Spatially Resolved Thermometry Using Neutron Resonance Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, Juan Carlos [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Barnes, Cris William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mocko, Michael Jeffrey [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Zavorka, Lukas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-01-31

    This report is intended to examine the use of neutron resonance spectroscopy (NRS) to make time- dependent and spatially-resolved temperature measurements of materials in extreme conditions. Specifically, the sensitivities of the temperature estimate on neutron-beam and diagnostic parameters is examined. Based on that examination, requirements are set on a pulsed neutron-source and diagnostics to make a meaningful measurement.

  19. Analysis of Timing Requirements for Data Aggregation and Control in Smart Grids

    DEFF Research Database (Denmark)

    Kemal, Mohammed Seifu; Olsen, Rasmus Løvenstein

    2014-01-01

    Modern communication mechanisms are at the heart of a smart grid system to ensure that the required information is transmitted within various components of the grid. Throughout this paper, we have studied how communication performance delays and smart grid controller delays effects the overall co...

  20. Analysis of Skills Requirement for Entry-Level Programmer/Analysts in Fortune 500 Corporations

    Science.gov (United States)

    Lee, Choong Kwon; Han, Hyo-Joo

    2008-01-01

    This paper presents the most up-to-date skill requirements for programmer/analyst, one of the most demanded entry-level job titles in the Information Systems (IS) field. In the past, several researchers studied job skills for IS professionals, but few have focused especially on "programmer/analyst." The authors conducted an extensive empirical…

  1. Side channel analysis of some hash based MACs: A response to SHA-3 requirements

    DEFF Research Database (Denmark)

    Gauravaram, Praveen; Okeya, Katsuyuki

    2008-01-01

    The forthcoming NIST's Advanced Hash Standard (AHS) competition to select SHA-3 hash function requires that each candidate hash function submission must have at least one construction to support FIPS 198 HMAC application. As part of its evaluation, NIST is aiming to select either a candidate hash...

  2. Analysis of near-term spent fuel transportation hardware requirements and transportation costs

    International Nuclear Information System (INIS)

    Daling, P.M.; Engel, R.L.

    1983-01-01

    A computer model was developed to quantify the transportation hardware requirements and transportation costs associated with shipping spent fuel in the commercial nucler fuel cycle in the near future. Results from this study indicate that alternative spent fuel shipping systems (consolidated or disassembled fuel elements and new casks designed for older fuel) will significantly reduce the transportation hardware requirements and costs for shipping spent fuel in the commercial nuclear fuel cycle, if there is no significant change in their operating/handling characteristics. It was also found that a more modest cost reduction results from increasing the fraction of spent fuel shipped by truck from 25% to 50%. Larger transportation cost reductions could be realized with further increases in the truck shipping fraction. Using the given set of assumptions, it was found that the existing spent fuel cask fleet size is generally adequate to perform the needed transportation services until a fuel reprocessing plant (FRP) begins to receive fuel (assumed in 1987). Once the FRP opens, up to 7 additional truck systems and 16 additional rail systems are required at the reference truck shipping fraction of 25%. For the 50% truck shipping fraction, 17 additional truck systems and 9 additional rail systems are required. If consolidated fuel only is shipped (25% by truck), 5 additional rail casks are required and the current truck cask fleet is more than adequate until at least 1995. Changes in assumptions could affect the results. Transportation costs for a federal interim storage program could total about $25M if the FRP begins receiving fuel in 1987 or about $95M if the FRP is delayed until 1989. This is due to an increased utilization of federal interim storage facility from 350 MTU for the reference scenario to about 750 MTU if reprocessing is delayed by two years

  3. A Comprehensive Energy Analysis and Related Carbon Footprint of Dairy Farms, Part 1: Direct Energy Requirements

    Directory of Open Access Journals (Sweden)

    Giuseppe Todde

    2018-02-01

    Full Text Available Dairy cattle farms are continuously developing more intensive systems of management which require higher utilization of durable and not-durable inputs. These inputs are responsible of significant direct and indirect fossil energy requirements which are related to remarkable emissions of CO2. This study aims to analyze direct energy requirements and the related carbon footprint of a large population of conventional dairy farms located in the south of Italy. A detailed survey of electricity, diesel and Liquefied Petroleum Gas (LPG consumptions has been carried out among on-farm activities. The results of the analyses showed an annual average fuel consumption of 40 kg per tonne of milk, while electricity accounted for 73 kWh per tonne of milk produced. Expressing the direct energy inputs as primary energy, diesel fuel results the main resource used in on-farm activities, accounting for 72% of the total fossil primary energy requirement, while electricity represents only 27%. Moreover, larger farms were able to use more efficiently the direct energy inputs and reduce the related emissions of carbon dioxide per unit of milk produced, since the milk yield increases with the herd size. The global average farm emissions of carbon dioxide equivalent, due to all direct energy usages, accounted for 156 kg CO2-eq per tonne of Fat and Protein Corrected Milk (FPCM, while farms that raise more than 200 heads emitted 36% less than the average value. In this two-part series, the total energy demand (Part 1 + Part 2 per farm is mainly due to agricultural inputs and fuel consumption, which have the largest quota of the annual requirements for each milk yield class. These results also showed that large size farms held lower CO2-eq emissions when referred to the mass of milk produced.

  4. Operational Net Assessment: A Framework for Social Network Analysis and Requirements for Critical Debate

    National Research Council Canada - National Science Library

    Hannan, Michael J

    2005-01-01

    .... SJFHQs were designed by the U.S. Joint Forces Command (USJFCOM) to provide Regional Combatant Commanders in-depth analysis for a specific adversary or situation within their area of responsibility...

  5. JET-ISX-B beryllium limiter experiment safety analysis report and operational safety requirements

    International Nuclear Information System (INIS)

    Edmonds, P.H.

    1985-09-01

    An experiment to evaluate the suitability of beryllium as a limiter material has been completed on the ISX-B tokamak. The experiment consisted of two phases: (1) the initial operation and characterization in the ISX experiment, and a period of continued operation to the specified surface fluence (10 22 atoms/cm 2 ) of hydrogen ions; and (2) the disassembly, decontamination, or disposal of the ISX facility. During these two phases of the project, the possibility existed for beryllium and/or beryllium oxide powder to be produced inside the vacuum vessel. Beryllium dust is a highly toxic material, and extensive precautions are required to prevent the release of the beryllium into the experimental work area and to prevent the contamination of personnel working on the device. Details of the health hazards associated with beryllium and the appropriate precautions are presented. Also described in appendixes to this report are the various operational safety requirements for the project

  6. An analysis of specialist and non-specialist user requirements for geographic climate change information.

    Science.gov (United States)

    Maguire, Martin C

    2013-11-01

    The EU EuroClim project developed a system to monitor and record climate change indicator data based on satellite observations of snow cover, sea ice and glaciers in Northern Europe and the Arctic. It also contained projection data for temperature, rainfall and average wind speed for Europe. These were all stored as data sets in a GIS database for users to download. The process of gathering requirements for a user population including scientists, researchers, policy makers, educationalists and the general public is described. Using an iterative design methodology, a user survey was administered to obtain initial feedback on the system concept followed by panel sessions where users were presented with the system concept and a demonstrator to interact with it. The requirements of both specialist and non-specialist users is summarised together with strategies for the effective communication of geographic climate change information. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  7. Analysis of Characteristics and Requirements for 5G Mobile Communication Systems

    Science.gov (United States)

    Ancans, G.; Stafecka, A.; Bobrovs, V.; Ancans, A.; Caiko, J.

    2017-08-01

    One of the main objectives of the fifth generation (5G) mobile communication systems, also known as IMT-2020, is to increase the current data rates up to several gigabits per second (Gbit/s) or even up to 10 Gbit/s and higher. One of the possibilities to consider is the use of higher frequencies in order to enlarge the available bandwidth. Wider bandwidth is necessary to achieve much higher data rates. It should be noted that wireless broadband transmission technologies require frequencies for their development. The main goal of the research is to investigate the characteristics and requirements of 5G mobile communication systems. The paper provides an insight into deployment scenario and radio wave propagation in frequencies above 24 GHz of IMT-2020.

  8. Analysis of Valve Requirements for High-Efficiency Digital Displacement Fluid Power Motors

    DEFF Research Database (Denmark)

    Rømer, Daniel; Johansen, Per; Pedersen, Henrik C.

    2013-01-01

    Digital displacement fluid power motors have been shown to enable high-efficiency operation in a wide operation range, including the part load range where conventional fluid power motors suffers from poor efficiencies. The use of these digital displacement motors set new requirements for the valve...... transition time and flow-pressure coefficient are normalized, leading to a presentation of the general efficiency map of the digital displacement motor. Finally the performance of existing commercial valves with respect to digital motors is commented....

  9. Requirements Analysis and Course Improvements for EO3502 Telecommunications Systems Engineering

    Science.gov (United States)

    2005-03-01

    electronic business technologist. The following courses are required: Digital Business Strategy Strategic Uses of IT and eCommerce IT For Business Capstone...network administration tools would be to your extreme advantage . Manual network engineering has all but disappeared, being replaced with highly...technological improvements, but the continued evolution of organizations and doctrine and the development of relevant training to sustain a comparative advantage

  10. Parametric analysis of diffuser requirements for high expansion ratio space engine

    Science.gov (United States)

    Wojciechowski, C. J.; Anderson, P. G.

    1981-01-01

    A supersonic diffuser ejector design computer program was developed. Using empirically modified one dimensional flow methods the diffuser ejector geometry is specified by the code. The design code results for calculations up to the end of the diffuser second throat were verified. Diffuser requirements for sea level testing of high expansion ratio space engines were defined. The feasibility of an ejector system using two commonly available turbojet engines feeding two variable area ratio ejectors was demonstrated.

  11. REQUIREMENTS PATTERNS FOR FORMAL CONTRACTS IN ARCHITECTURAL ANALYSIS AND DESIGN LANGUAGE (AADL) MODELS

    Science.gov (United States)

    2017-04-17

    because of simultaneous failures in two of the aircrafts braking system . The architecture of the primary Braking System Control Unit (BSCU) is...is a component of the overall Flight Control System (FCS) that compares the measured state of an aircraft (position, speed, and attitude) to the...Cyberphysical Systems , Formal Methods, Requirements Patterns, AADL, Assume Guarantee Reasoning Environment 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF

  12. Reactivity variation's analysis in nuclear propulsion considering the operational real conditions requirements

    International Nuclear Information System (INIS)

    Pires, Leonardo Paredes; Santos, Rubens Souza dos; Lapa, Marcelo Franklin

    2015-01-01

    The work presented in this paper highlights the need for the study to determine the reactivity variation ramps needed and possible to meet the real operational conditions required by a nuclear submarine in this several operating phases. In accordance with the operational needs and necessary maneuvers in certain tactical situations, large power variations in the propulsion are demanded. As these sudden and severe changes in propulsion come from the thermal power of nuclear origin, the operation of the nuclear island has to know what kind of answers and criticality variations are necessary to meet each demand speed required. It should be noted that these criticality inserts are conditioned, not only by the propulsion needs, but fundamentally by the imperative need to ensure the core integrity and the chain reaction sustainability considering the phenomenons and complex effects, nonlinear and retro-fed involved. It has to be determined what is the past and required time for each criticality insertion is perceived as motor power. Considering the highlighted aspects, this article concludes and indicates to its end, the need to establish a base operating transitional agenda, according to the naval combat doctrine, to be tested and analyzed under the aspects and peculiarities of kinetic reactors, with the purpose of being generated the appropriate criticality curves for each real need and their respective times of anticipated action. (author)

  13. System-level Analysis of Food Moisture Content Requirements for the Mars Dual Lander Transit Mission

    Science.gov (United States)

    Levri, Julie A.; Perchonok, Michele H.

    2004-01-01

    In order to ensure that adequate water resources are available during a mission, any net water loss from the habitat must be balanced with an equivalent amount of required makeup water. Makeup water may come from a variety of sources, including water in shipped tanks, water stored in prepackaged food, product water from fuel cells, and in-situ water resources. This paper specifically addresses the issue of storing required makeup water in prepackaged food versus storing the water in shipped tanks for the Mars Dual Lander Transit Mission, one of the Advanced Life Support Reference Missions. In this paper, water mass balances have been performed for the Dual Lander Transit Mission, to determine the necessary requirement of makeup water under nominal operation (i.e. no consideration of contingency needs), on a daily basis. Contingency issues are briefly discussed with respect to impacts on makeup water storage (shipped tanks versus storage in prepackaged food). The Dual Lander Transit Mission was selected for study because it has been considered by the Johnson Space Center Exploration Office in enough detail to define a reasonable set of scenario options for nominal system operation and contingencies. This study also illustrates the concept that there are multiple, reasonable life support system scenarios for any one particular mission. Thus, the need for a particular commodity can depend upon many variables in the system. In this study, we examine the need for makeup water as it depends upon the configuration of the rest of the life support system.

  14. Reactivity variation's analysis in nuclear propulsion considering the operational real conditions requirements

    Energy Technology Data Exchange (ETDEWEB)

    Pires, Leonardo Paredes; Santos, Rubens Souza dos; Lapa, Marcelo Franklin, E-mail: leonardo_paredes@icloud.com, E-mail: lapa@ien.gov.br, E-mail: rsantos@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2015-07-01

    The work presented in this paper highlights the need for the study to determine the reactivity variation ramps needed and possible to meet the real operational conditions required by a nuclear submarine in this several operating phases. In accordance with the operational needs and necessary maneuvers in certain tactical situations, large power variations in the propulsion are demanded. As these sudden and severe changes in propulsion come from the thermal power of nuclear origin, the operation of the nuclear island has to know what kind of answers and criticality variations are necessary to meet each demand speed required. It should be noted that these criticality inserts are conditioned, not only by the propulsion needs, but fundamentally by the imperative need to ensure the core integrity and the chain reaction sustainability considering the phenomenons and complex effects, nonlinear and retro-fed involved. It has to be determined what is the past and required time for each criticality insertion is perceived as motor power. Considering the highlighted aspects, this article concludes and indicates to its end, the need to establish a base operating transitional agenda, according to the naval combat doctrine, to be tested and analyzed under the aspects and peculiarities of kinetic reactors, with the purpose of being generated the appropriate criticality curves for each real need and their respective times of anticipated action. (author)

  15. An analysis of Technical Security Control Requirements For Digital I and C Systems in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Song, Jaegu; Lee, Jungwoon; Park, Geeyong; Kwon, Keechoon; Lee, Dongyoung; Lee, Cheolkwon

    2013-01-01

    Instrumentation and control systems in nuclear power plants have been digitalized for the purpose of maintenance and precise operation. This digitalization, however, brings out issues related to cyber security. In the most recent past, international standard organizations, regulatory institutes, and research institutes have performed a number of studies addressing these systems cyber security. In order to provide information helpful to the system designers in their application of cyber security for the systems, this paper presents methods and considerations to define attack vectors in a target system, to review and select the requirements in the Regulatory Guide 5.71, and to integrate the results to identify applicable technical security control requirements. In this study, attack vectors are analyzed through the vulnerability analyses and penetration tests with a simplified safety system, and the elements of critical digital assets acting as attack vectors are identified. Among the security control requirements listed in Appendices B and C to Regulatory Guide 5.71, those that should be implemented into the systems are selected and classified in groups of technical security control requirements using the results of the attack vector analysis. For the attack vector elements of critical digital assets, all the technical security control requirements are evaluated to determine whether they are applicable and effective, and considerations in this evaluation are also discussed. The technical security control requirements in three important categories of access control, monitoring and logging, and encryption are derived and grouped according to the elements of attack vectors as results for the sample safety system

  16. An analysis of Technical Security Control Requirements For Digital I and C Systems in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jaegu; Lee, Jungwoon; Park, Geeyong; Kwon, Keechoon; Lee, Dongyoung; Lee, Cheolkwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    Instrumentation and control systems in nuclear power plants have been digitalized for the purpose of maintenance and precise operation. This digitalization, however, brings out issues related to cyber security. In the most recent past, international standard organizations, regulatory institutes, and research institutes have performed a number of studies addressing these systems cyber security. In order to provide information helpful to the system designers in their application of cyber security for the systems, this paper presents methods and considerations to define attack vectors in a target system, to review and select the requirements in the Regulatory Guide 5.71, and to integrate the results to identify applicable technical security control requirements. In this study, attack vectors are analyzed through the vulnerability analyses and penetration tests with a simplified safety system, and the elements of critical digital assets acting as attack vectors are identified. Among the security control requirements listed in Appendices B and C to Regulatory Guide 5.71, those that should be implemented into the systems are selected and classified in groups of technical security control requirements using the results of the attack vector analysis. For the attack vector elements of critical digital assets, all the technical security control requirements are evaluated to determine whether they are applicable and effective, and considerations in this evaluation are also discussed. The technical security control requirements in three important categories of access control, monitoring and logging, and encryption are derived and grouped according to the elements of attack vectors as results for the sample safety system.

  17. A Colorimetric Analysis Experiment Not Requiring a Spectrophotometer: Quantitative Determination of Albumin in Powdered Egg White

    Science.gov (United States)

    Charlton, Amanda K.; Sevcik, Richard S.; Tucker, Dorie A.; Schultz, Linda D.

    2007-01-01

    A general science experiment for high school chemistry students might serve as an excellent review of the concepts of solution preparation, solubility, pH, and qualitative and quantitative analysis of a common food product. The students could learn to use safe laboratory techniques, collect and analyze data using proper scientific methodology and…

  18. Requirements analysis report for transport estimation, preconstruction, construction, decision support and electronic bidding systems

    Science.gov (United States)

    2009-01-01

    Info Tech conducted an on-site visit at the Connecticut Department of Transportation in Newington : from October 27-31, 2008. The purpose of the visit was to conduct an analysis of ConnDOTs : processes and to review the operations and business sys...

  19. A rapid response air quality analysis system for use in projects having stringent quality assurance requirements

    International Nuclear Information System (INIS)

    Bowman, A.W.

    1990-01-01

    This paper describes an approach to solve air quality problems which frequently occur during iterations of the baseline change process. From a schedule standpoint, it is desirable to perform this evaluation in as short a time as possible while budgetary pressures limit the size of the staff available to do the work. Without a method in place to deal with baseline change proposal requests the environment analysts may not be able to produce the analysis results in the time frame expected. Using a concept called the Rapid Response Air Quality Analysis System (RAAS), the problems of timing and cost become tractable. The system could be adapted to assess other atmospheric pathway impacts, e.g., acoustics or visibility. The air quality analysis system used to perform the EA analysis (EA) for the Salt Repository Project (part of the Civilian Radioactive Waste Management Program), and later to evaluate the consequences of proposed baseline changes, consists of three components: Emission source data files; Emission rates contained in spreadsheets; Impact assessment model codes. The spreadsheets contain user-written codes (macros) that calculate emission rates from (1) emission source data (e.g., numbers and locations of sources, detailed operating schedules, and source specifications including horsepower, load factor, and duty cycle); (2) emission factors such as those published by the U.S. Environmental Protection Agency, and (3) control efficiencies

  20. Sequence analysis of putative swrW gene required for surfactant ...

    African Journals Online (AJOL)

    owner

    2012-07-17

    Jul 17, 2012 ... These nucleotide and protein sequence analysis of the putative swrW gene provides vital information on the versatility .... chain reaction (PCR) products were stored at 4°C. Presence of ... identical to the same gene with an E-value of 0.0. .... The Prokaryotes-A Handbook on the Biol. of Bacteria:Ecophysiol.

  1. Sequence analysis of putative swrW gene required for surfactant ...

    African Journals Online (AJOL)

    Serratia marcescens produces biosurfactant serrawettin, essential for its population migration behavior. Serrawettin W1 was revealed to be an antibiotic serratamolide that makes it significant for deoxyribonucleic acid (DNA) and protein sequence analysis. Four nucleotide and amino-acid sequences from local strains ...

  2. The Army Materiel Requirements Documents: Qualitative Analysis of Efficiency and Effectiveness

    Science.gov (United States)

    2013-06-30

    65 - k~î~ä=mçëíÖê~Çì~íÉ=pÅÜççä= We measure efficiency based on two BPP initiatives: (1) Build Stronger Partnerships With the Requirements...poor,” “average,” or “excellent” based on comments received from SMEs in relation to the definitions of each BPP initiative during our interviews. A...M-ATV, and JLTV and how well they rank in terms of efficiency and effectiveness according to BPP initiatives. For efficiency, we assign a

  3. An Analysis of Department of Defense Financial and Acquisition Policies in Support of Military Contingency Requirements.

    Science.gov (United States)

    1984-03-01

    LEGION 64 (March 1958): 12-13+. 131 Goldich, Robert L. "Mobilization for the Apocalypse." ARMY 28 (May 1978): 22-25+. 132 Gray, Colin S. "The Military...Decerber 8, 1942): 5-7. 632 Drury , V.M. "Too Little, Too Late Again (Coordination Detween Armed Services for Peacetirme Planning of Industrial...System." ". Military Review 57 (November, 1977): 76-82. Gray, Colin S. "Military Requirements for U. S. Strategy." MiltarReview 59 (September 1979): 2

  4. Department of Energy Environmental Management cost infrastructure development program: Cost analysis requirements

    International Nuclear Information System (INIS)

    Custer, W.R. Jr.; Messick, C.D.

    1996-01-01

    This report was prepared to support development of the Department of Energy Environmental Management cost infrastructure -- a new capability to independently estimate and analyze costs. Currently, the cost data are reported according to a structure that blends level of effort tasks with product and process oriented tasks. Also. the budgetary inputs are developed from prior year funding authorizations and from contractor-developed parametric estimates that have been adjusted to planned funding levels or appropriations. Consequently, it is difficult for headquarters and field-level activities to use actual cost data and technical requirements to independently assess the costs generated and identify trends, potential cost savings from process improvements, and cost reduction strategies

  5. Analysis of Plug Load Capacities and Power Requirements in Commercial Buildings: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Sheppy, M.; Torcellini, P.; Gentile-Polese, L.

    2014-08-01

    Plug and process load power requirements are frequently overestimated because designers often use estimates based on 'nameplate' data, or design assumptions are high because information is not available. This generally results in oversized heating, ventilation, and air-conditioning systems; increased initial construction costs; and increased energy use caused by inefficiencies at low, part-load operation. Rightsizing of chillers in two buildings reduced whole-building energy use by 3%-4%. If an integrated design approach could enable 3% whole-building energy savings in all U.S. office buildings stock, it could save 34 TBtu of site energy per year.

  6. Natural circulation cooldown analysis for Yonggwang 3 and 4 per US NRC BTP RSB 5-1 requirements

    International Nuclear Information System (INIS)

    Seo, J.T.; Ko, C.S.; Ro, T.S.; Simoni, L.P.

    2004-01-01

    The Natural Circulation Cooldown (NCC) analysis from normal operations to shutdown cooling entry conditions for Yonggwang units 3 and 4 (YGN 3 and 4) was performed within the requirements of U.S. Nuclear Regulatory Commission (NRC) Branch Technical Position (BTP) RSB 5-1. The results showed that the YGN 3 and 4 can be cooled and depressurized to the shutdown entry conditions (350 deg F, 410 psia) within 16 hours under natural circulation condition requiring only 78% of the minimum condensate water storage capacity in conformance with BTP RSB 5-1 requirements. The results also demonstrated that the safety grade Reactor Coolant Gas Vent System (RCGVS) has sufficient capacity for the RCS depressurization as well as for the steam void control in the reactor vessel upper head region. (author)

  7. THE 3C COOPERATION MODEL APPLIED TO THE CLASSICAL REQUIREMENT ANALYSIS

    Directory of Open Access Journals (Sweden)

    Vagner Luiz Gava

    2012-08-01

    Full Text Available Aspects related to the users' cooperative work are not considered in the traditional approach of software engineering, since the user is viewed independently of his/her workplace environment or group, with the individual model generalized to the study of collective behavior of all users. This work proposes a process for software requirements to address issues involving cooperative work in information systems that provide distributed coordination in the users' actions and the communication among them occurs indirectly through the data entered while using the software. To achieve this goal, this research uses ergonomics, the 3C cooperation model, awareness and software engineering concepts. Action-research is used as a research methodology applied in three cycles during the development of a corporate workflow system in a technological research company. This article discusses the third cycle, which corresponds to the process that deals with the refinement of the cooperative work requirements with the software in actual use in the workplace, where the inclusion of a computer system changes the users’ workplace, from the face to face interaction to the interaction mediated by the software. The results showed that the highest degree of users' awareness about their activities and other system users contribute to a decrease in their errors and in the inappropriate use of the system

  8. No control genes required: Bayesian analysis of qRT-PCR data.

    Directory of Open Access Journals (Sweden)

    Mikhail V Matz

    Full Text Available Model-based analysis of data from quantitative reverse-transcription PCR (qRT-PCR is potentially more powerful and versatile than traditional methods. Yet existing model-based approaches cannot properly deal with the higher sampling variances associated with low-abundant targets, nor do they provide a natural way to incorporate assumptions about the stability of control genes directly into the model-fitting process.In our method, raw qPCR data are represented as molecule counts, and described using generalized linear mixed models under Poisson-lognormal error. A Markov Chain Monte Carlo (MCMC algorithm is used to sample from the joint posterior distribution over all model parameters, thereby estimating the effects of all experimental factors on the expression of every gene. The Poisson-based model allows for the correct specification of the mean-variance relationship of the PCR amplification process, and can also glean information from instances of no amplification (zero counts. Our method is very flexible with respect to control genes: any prior knowledge about the expected degree of their stability can be directly incorporated into the model. Yet the method provides sensible answers without such assumptions, or even in the complete absence of control genes. We also present a natural Bayesian analogue of the "classic" analysis, which uses standard data pre-processing steps (logarithmic transformation and multi-gene normalization but estimates all gene expression changes jointly within a single model. The new methods are considerably more flexible and powerful than the standard delta-delta Ct analysis based on pairwise t-tests.Our methodology expands the applicability of the relative-quantification analysis protocol all the way to the lowest-abundance targets, and provides a novel opportunity to analyze qRT-PCR data without making any assumptions concerning target stability. These procedures have been implemented as the MCMC.qpcr package in R.

  9. A Principal Component Analysis of Skills and Competencies Required of Quantity Surveyors: Nigerian Perspective

    OpenAIRE

    Oluwasuji Dada, Joshua

    2014-01-01

    The purpose of this paper is to examine the intrinsic relationships among sets of quantity surveyors’ skill and competence variables with a view to reducing them into principal components. The research adopts a data reduction technique using factor analysis statistical technique. A structured questionnaire was administered among major stakeholders in the Nigerian construction industry. The respondents were asked to give rating, on a 5 point Likert scale, on skills and competencies re...

  10. No control genes required: Bayesian analysis of qRT-PCR data.

    Science.gov (United States)

    Matz, Mikhail V; Wright, Rachel M; Scott, James G

    2013-01-01

    Model-based analysis of data from quantitative reverse-transcription PCR (qRT-PCR) is potentially more powerful and versatile than traditional methods. Yet existing model-based approaches cannot properly deal with the higher sampling variances associated with low-abundant targets, nor do they provide a natural way to incorporate assumptions about the stability of control genes directly into the model-fitting process. In our method, raw qPCR data are represented as molecule counts, and described using generalized linear mixed models under Poisson-lognormal error. A Markov Chain Monte Carlo (MCMC) algorithm is used to sample from the joint posterior distribution over all model parameters, thereby estimating the effects of all experimental factors on the expression of every gene. The Poisson-based model allows for the correct specification of the mean-variance relationship of the PCR amplification process, and can also glean information from instances of no amplification (zero counts). Our method is very flexible with respect to control genes: any prior knowledge about the expected degree of their stability can be directly incorporated into the model. Yet the method provides sensible answers without such assumptions, or even in the complete absence of control genes. We also present a natural Bayesian analogue of the "classic" analysis, which uses standard data pre-processing steps (logarithmic transformation and multi-gene normalization) but estimates all gene expression changes jointly within a single model. The new methods are considerably more flexible and powerful than the standard delta-delta Ct analysis based on pairwise t-tests. Our methodology expands the applicability of the relative-quantification analysis protocol all the way to the lowest-abundance targets, and provides a novel opportunity to analyze qRT-PCR data without making any assumptions concerning target stability. These procedures have been implemented as the MCMC.qpcr package in R.

  11. Complete motif analysis of sequence requirements for translation initiation at non-AUG start codons.

    Science.gov (United States)

    Diaz de Arce, Alexander J; Noderer, William L; Wang, Clifford L

    2018-01-25

    The initiation of mRNA translation from start codons other than AUG was previously believed to be rare and of relatively low impact. More recently, evidence has suggested that as much as half of all translation initiation utilizes non-AUG start codons, codons that deviate from AUG by a single base. Furthermore, non-AUG start codons have been shown to be involved in regulation of expression and disease etiology. Yet the ability to gauge expression based on the sequence of a translation initiation site (start codon and its flanking bases) has been limited. Here we have performed a comprehensive analysis of translation initiation sites that utilize non-AUG start codons. By combining genetic-reporter, cell-sorting, and high-throughput sequencing technologies, we have analyzed the expression associated with all possible variants of the -4 to +4 positions of non-AUG translation initiation site motifs. This complete motif analysis revealed that 1) with the right sequence context, certain non-AUG start codons can generate expression comparable to that of AUG start codons, 2) sequence context affects each non-AUG start codon differently, and 3) initiation at non-AUG start codons is highly sensitive to changes in the flanking sequences. Complete motif analysis has the potential to be a key tool for experimental and diagnostic genomics. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

  12. Software use cases to elicit the software requirements analysis within the ASTRI project

    Science.gov (United States)

    Conforti, Vito; Antolini, Elisa; Bonnoli, Giacomo; Bruno, Pietro; Bulgarelli, Andrea; Capalbi, Milvia; Fioretti, Valentina; Fugazza, Dino; Gardiol, Daniele; Grillo, Alessandro; Leto, Giuseppe; Lombardi, Saverio; Lucarelli, Fabrizio; Maccarone, Maria Concetta; Malaguti, Giuseppe; Pareschi, Giovanni; Russo, Federico; Sangiorgi, Pierluca; Schwarz, Joseph; Scuderi, Salvatore; Tanci, Claudio; Tosti, Gino; Trifoglio, Massimo; Vercellone, Stefano; Zanmar Sanchez, Ricardo

    2016-07-01

    The Italian National Institute for Astrophysics (INAF) is leading the Astrofisica con Specchi a Tecnologia Replicante Italiana (ASTRI) project whose main purpose is the realization of small size telescopes (SST) for the Cherenkov Telescope Array (CTA). The first goal of the ASTRI project has been the development and operation of an innovative end-to-end telescope prototype using a dual-mirror optical configuration (SST-2M) equipped with a camera based on silicon photo-multipliers and very fast read-out electronics. The ASTRI SST-2M prototype has been installed in Italy at the INAF "M.G. Fracastoro" Astronomical Station located at Serra La Nave, on Mount Etna, Sicily. This prototype will be used to test several mechanical, optical, control hardware and software solutions which will be used in the ASTRI mini-array, comprising nine telescopes proposed to be placed at the CTA southern site. The ASTRI mini-array is a collaborative and international effort led by INAF and carried out by Italy, Brazil and South-Africa. We present here the use cases, through UML (Unified Modeling Language) diagrams and text details, that describe the functional requirements of the software that will manage the ASTRI SST-2M prototype, and the lessons learned thanks to these activities. We intend to adopt the same approach for the Mini Array Software System that will manage the ASTRI miniarray operations. Use cases are of importance for the whole software life cycle; in particular they provide valuable support to the validation and verification activities. Following the iterative development approach, which breaks down the software development into smaller chunks, we have analysed the requirements, developed, and then tested the code in repeated cycles. The use case technique allowed us to formalize the problem through user stories that describe how the user procedurally interacts with the software system. Through the use cases we improved the communication among team members, fostered

  13. Input-output analysis of energy requirements for short rotation, intensive culture, woody biomass

    International Nuclear Information System (INIS)

    Strauss, C.H.; Grado, S.C.

    1992-01-01

    A production model for short rotation, intensive culture (SRIC) plantations was developed to determine the energy and financial cost of woody biomass. The model was based on hybrid poplars planted on good quality agricultural sites at a density of 2100 cuttings ha -1 , with average annual growth forecast at 16 metric tonne, oven dry (mg(OD)). Energy and financial analyses showed preharvest cost 4381 megajoules (MJ) Mg -1 (OD) and $16 (US) Mg -1 (OD). Harvesting and transportation requirements increased the total costs 6130 MJ Mg -1 (OD) and $39 Mg -1 (OD) for the delivered material. On an energy cost basis, the principal input was land, whereas on a financial basis, costs were more uniformly distributed among equipment, land, labor, and materials and fuel

  14. Analysis of required investment and benefits using RFID in supply chains

    Directory of Open Access Journals (Sweden)

    Atanasković Predrag

    2012-06-01

    Full Text Available Strengthening competition, short product life cycles and technological development of information technology (IT has changed the ways companies operate. Radio frequency identification technology (RFID is one of the technologies whose use is being rapidly tested in many fields. At the beginning of this century, the leading retail companies, in cooperation with their suppliers, began the testing of RFID systems application in supply chains. An important component of these studies, besides the effects achieved in the supply chains, is determining the required investments. The approach for the feasibility assessment of investments in RFID systems from the aspect of logistics is presented in this paper, and the results obtained for a realistic two-stage supply chain are given as an example.

  15. Requirement analysis for autonomous systems and intelligent agents in future Danish electric power systems

    DEFF Research Database (Denmark)

    Saleem, Arshad; Lind, Morten

    2010-01-01

    we review innovative control architectures in electric power systems such as Microgrids, Virtual power plants and Cell based systems. We evaluate application of autonomous systems and intelligent agents in each of these control architectures particularly in the context of Denmark's strategic energy...... plans. The second part formulates a flexible control architecture for electric power systems with very high penetration of distributed generation. This control architecture is based upon the requirements identified in the first part. We also present development of a software framework to test......Denmark has already achieved a record of 20% penetration of wind power and now moving towards even higher targets with an increasing part of the electricity produced by distributed generators (DGs). In this paper we report work from a sub activity "subgrid design" of the EcoGrid.dk project. First...

  16. Genetic Analysis of Diaminopimelic Acid- and Lysine-Requiring Mutants of Escherichia coli1

    Science.gov (United States)

    Bukhari, Ahmad I.; Taylor, Austin L.

    1971-01-01

    Several diaminopimelic acid (DAP)- and lysine-requiring mutants of Escherichia coli were isolated and studied by genetic, physiological, and biochemical means. The genes concerned with DAP-lysine synthesis map at several different sites on the E. coli chromosome and, therefore, do not constitute a single operon. Three separate loci affecting DAP synthesis are located in the 0 to 2.5 min region of the genetic map. The order of the loci in this region is thr-dapB-pyrA-ara-leu-pan-dapC-tonA-dapD. Two additional DAP genes map in the region between min 47 and 48, with the gene order being gua-dapA-dapE-ctr. The lys locus at min 55 determines the synthesis of the enzyme DAP decarboxylase, which catalyzes the conversion of DAP into lysine. The order of the genes in this region is serA-lysA-thyA. PMID:4926684

  17. Genetic analysis of diaminopimelic acid- and lysine-requiring mutants of Escherichia coli.

    Science.gov (United States)

    Bukhari, A I; Taylor, A L

    1971-03-01

    Several diaminopimelic acid (DAP)- and lysine-requiring mutants of Escherichia coli were isolated and studied by genetic, physiological, and biochemical means. The genes concerned with DAP-lysine synthesis map at several different sites on the E. coli chromosome and, therefore, do not constitute a single operon. Three separate loci affecting DAP synthesis are located in the 0 to 2.5 min region of the genetic map. The order of the loci in this region is thr-dapB-pyrA-ara-leu-pan-dapC-tonA-dapD. Two additional DAP genes map in the region between min 47 and 48, with the gene order being gua-dapA-dapE-ctr. The lys locus at min 55 determines the synthesis of the enzyme DAP decarboxylase, which catalyzes the conversion of DAP into lysine. The order of the genes in this region is serA-lysA-thyA.

  18. Parametric Analysis of Acoustical Requirements for Lateral Reflections: Melbourne Recital Hall Case Study

    Directory of Open Access Journals (Sweden)

    Erica Claustro

    2013-06-01

    Full Text Available This paper is an investigation of the Melbourne Recital Centre as a case study to define the parameters necessary for good acoustical quality as it relates to the Binaural Quality Index and determining the intimacy of the hall by its initial time delay gap. The Melbourne Recital Centre, designed by Ashton Raggatt McDougall Architects, is a significant case study, as its design was driven by the acoustic requirements of reflection and diffusion through Odeon Acoustical Software. It achieves the same acoustical quality of older, ornately designed shoebox concert halls, from the perspective of contemporary design and fabrication tools and techniques. The sleek design of the Melbourne Recital Centre successfully reflects sound waves in low, mid, and high frequencies due to corresponding wall panel differentiation in the corresponding scales, as engineered by Arup Acoustics.

  19. Pre-concentration technique for reduction in "Analytical instrument requirement and analysis"

    Science.gov (United States)

    Pal, Sangita; Singha, Mousumi; Meena, Sher Singh

    2018-04-01

    Availability of analytical instruments for a methodical detection of known and unknown effluents imposes a serious hindrance in qualification and quantification. Several analytical instruments such as Elemental analyzer, ICP-MS, ICP-AES, EDXRF, ion chromatography, Electro-analytical instruments which are not only expensive but also time consuming, required maintenance, damaged essential parts replacement which are of serious concern. Move over for field study and instant detection installation of these instruments are not convenient to each and every place. Therefore, technique such as pre-concentration of metal ions especially for lean stream elaborated and justified. Chelation/sequestration is the key of immobilization technique which is simple, user friendly, most effective, least expensive, time efficient; easy to carry (10g - 20g vial) to experimental field/site has been demonstrated.

  20. Better Building Alliance, Plug and Process Loads in Commercial Buildings: Capacity and Power Requirement Analysis (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2014-09-01

    This brochure addresses gaps in actionable knowledge that can help reduce the plug load capacities designed into buildings. Prospective building occupants and real estate brokers lack accurate references for plug and process load (PPL) capacity requirements, so they often request 5-10 W/ft2 in their lease agreements. This brochure should be used to make these decisions so systems can operate more energy efficiently; upfront capital costs will also decrease. This information can also be used to drive changes in negotiations about PPL energy demands. It should enable brokers and tenants to agree about lower PPL capacities. Owner-occupied buildings will also benefit. Overestimating PPL capacity leads designers to oversize electrical infrastructure and cooling systems.

  1. [Experimental study on carbon fiber reinforced plastic plate--analysis of stabilizing force required for plate].

    Science.gov (United States)

    Iizuka, H

    1990-11-01

    Plates currently in use for the management of bone fracture made of metal present with various problems. We manufactured carbon fiber reinforced plastic (CFRP) plates from Pyrofil T/530 puriplegs overlaid at cross angles of +/- 10 degrees, +/- 20 degrees, and +/- 30 degrees for trial and carried out an experimental study on rabbit tibiofibular bones using 316L stainless steel plates of comparable shape and size as controls. The results indicate the influence of CFRP plate upon cortical bone was milder than that of stainless steel plate, with an adequate stabilizing force for the repair of fractured rabbit tibiofibular bones. CFRP has the advantages over metals of being virtually free from corrosion and fatigue, reasonably radiolucent and able to meet a wide range of mechanical requirements. This would make CFRP plate quite promising as a new devices of treating fracture of bones.

  2. Testing and analysis to determine the shell thickness required to prevent puncture

    International Nuclear Information System (INIS)

    Ammerman, D.J.; Radloff, H.D.; Eifert, E.J.

    1998-05-01

    Type B radioactive material packages are required to withstand a hypothetical puncture accident of a free fall from a height of one meter onto a 15 cm diameter mild steel puncture probe. For many packages it is desirable to have this accident event not result in puncture or tearing of the outer shell of the package. The wall thickness necessary to prevent this has historically been determined by test or the use of empirical relations. This technique generally results in overly conservative designs, but the degree of conservatism is uncertain. The use of modem finite element codes to determine package response to puncture accidents can result in designs that are both safe and economical. The work reported in this paper is aimed at developing a method to analytically determine the wall thickness required to prevent puncture. For designers and regulators to have confidence in this analytical method, however, it must be benchmarked against test results. A series of tests has been conducted with differing shell thicknesses, shell materials of mild steel and stainless steel, and shell backing materials of lead, foam, and air. The results of these tests have been compared with pre-test analytical predictions of the response obtained from the nonlinear transient dynamic finite element program PRONTO-2D. From this comparison it can be seen that the finite element method can accurately predict the response of packages to puncture accidents. This implies that an analytical technique based on the finite element method can be used to design packages having known response and margin of safety against tearing of the outer shell. In addition, the analytical technique can accurately predict the deformed shape of the package following the test. This may be important for subsequent calculations, such as external dose and heat input during a thermal event

  3. Comparative analysis of knowledge representation and reasoning requirements across a range of life sciences textbooks.

    Science.gov (United States)

    Chaudhri, Vinay K; Elenius, Daniel; Goldenkranz, Andrew; Gong, Allison; Martone, Maryann E; Webb, William; Yorke-Smith, Neil

    2014-01-01

    Using knowledge representation for biomedical projects is now commonplace. In previous work, we represented the knowledge found in a college-level biology textbook in a fashion useful for answering questions. We showed that embedding the knowledge representation and question-answering abilities in an electronic textbook helped to engage student interest and improve learning. A natural question that arises from this success, and this paper's primary focus, is whether a similar approach is applicable across a range of life science textbooks. To answer that question, we considered four different textbooks, ranging from a below-introductory college biology text to an advanced, graduate-level neuroscience textbook. For these textbooks, we investigated the following questions: (1) To what extent is knowledge shared between the different textbooks? (2) To what extent can the same upper ontology be used to represent the knowledge found in different textbooks? (3) To what extent can the questions of interest for a range of textbooks be answered by using the same reasoning mechanisms? Our existing modeling and reasoning methods apply especially well both to a textbook that is comparable in level to the text studied in our previous work (i.e., an introductory-level text) and to a textbook at a lower level, suggesting potential for a high degree of portability. Even for the overlapping knowledge found across the textbooks, the level of detail covered in each textbook was different, which requires that the representations must be customized for each textbook. We also found that for advanced textbooks, representing models and scientific reasoning processes was particularly important. With some additional work, our representation methodology would be applicable to a range of textbooks. The requirements for knowledge representation are common across textbooks, suggesting that a shared semantic infrastructure for the life sciences is feasible. Because our representation overlaps

  4. Analysis of the security and privacy requirements of cloud-based electronic health records systems.

    Science.gov (United States)

    Rodrigues, Joel J P C; de la Torre, Isabel; Fernández, Gonzalo; López-Coronado, Miguel

    2013-08-21

    The Cloud Computing paradigm offers eHealth systems the opportunity to enhance the features and functionality that they offer. However, moving patients' medical information to the Cloud implies several risks in terms of the security and privacy of sensitive health records. In this paper, the risks of hosting Electronic Health Records (EHRs) on the servers of third-party Cloud service providers are reviewed. To protect the confidentiality of patient information and facilitate the process, some suggestions for health care providers are made. Moreover, security issues that Cloud service providers should address in their platforms are considered. To show that, before moving patient health records to the Cloud, security and privacy concerns must be considered by both health care providers and Cloud service providers. Security requirements of a generic Cloud service provider are analyzed. To study the latest in Cloud-based computing solutions, bibliographic material was obtained mainly from Medline sources. Furthermore, direct contact was made with several Cloud service providers. Some of the security issues that should be considered by both Cloud service providers and their health care customers are role-based access, network security mechanisms, data encryption, digital signatures, and access monitoring. Furthermore, to guarantee the safety of the information and comply with privacy policies, the Cloud service provider must be compliant with various certifications and third-party requirements, such as SAS70 Type II, PCI DSS Level 1, ISO 27001, and the US Federal Information Security Management Act (FISMA). Storing sensitive information such as EHRs in the Cloud means that precautions must be taken to ensure the safety and confidentiality of the data. A relationship built on trust with the Cloud service provider is essential to ensure a transparent process. Cloud service providers must make certain that all security mechanisms are in place to avoid unauthorized access

  5. A Geometric Capacity-Demand Analysis of Maternal Levator Muscle Stretch Required for Vaginal Delivery.

    Science.gov (United States)

    Tracy, Paige V; DeLancey, John O; Ashton-Miller, James A

    2016-02-01

    Because levator ani (LA) muscle injuries occur in approximately 13% of all vaginal births, insights are needed to better prevent them. In Part I of this paper, we conducted an analysis of the bony and soft tissue factors contributing to the geometric "capacity" of the maternal pelvis and pelvic floor to deliver a fetal head without incurring stretch injury of the maternal soft tissue. In Part II, we quantified the range in demand, represented by the variation in fetal head size and shape, placed on the maternal pelvic floor. In Part III, we analyzed the capacity-to-demand geometric ratio, g, in order to determine whether a mother can deliver a head of given size without stretch injury. The results of a Part I sensitivity analysis showed that initial soft tissue loop length (SL) had the greatest effect on maternal capacity, followed by the length of the soft tissue loop above the inferior pubic rami at ultimate crowning, then subpubic arch angle (SPAA) and head size, and finally the levator origin separation distance. We found the more caudal origin of the puborectal portion of the levator muscle helps to protect it from the stretch injuries commonly observed in the pubovisceral portion. Part II fetal head molding index (MI) and fetal head size revealed fetal head circumference values ranging from 253 to 351 mm, which would increase up to 11 mm upon face presentation. The Part III capacity-demand analysis of g revealed that, based on geometry alone, the 10th percentile maternal capacity predicted injury for all head sizes, the 25th percentile maternal capacity could deliver half of all head sizes, while the 50th percentile maternal capacity could deliver a head of any size without injury. If ultrasound imaging could be operationalized to make measurements of ratio g, it might be used to usefully inform women on their level of risk for levator injury during vaginal birth.

  6. Link Performance Analysis and monitoring - A unified approach to divergent requirements

    Science.gov (United States)

    Thom, G. A.

    Link Performance Analysis and real-time monitoring are generally covered by a wide range of equipment. Bit Error Rate testers provide digital link performance measurements but are not useful during real-time data flows. Real-time performance monitors utilize the fixed overhead content but vary widely from format to format. Link quality information is also present from signal reconstruction equipment in the form of receiver AGC, bit synchronizer AGC, and bit synchronizer soft decision level outputs, but no general approach to utilizing this information exists. This paper presents an approach to link tests, real-time data quality monitoring, and results presentation that utilizes a set of general purpose modules in a flexible architectural environment. The system operates over a wide range of bit rates (up to 150 Mbs) and employs several measurement techniques, including P/N code errors or fixed PCM format errors, derived real-time BER from frame sync errors, and Data Quality Analysis derived by counting significant sync status changes. The architecture performs with a minimum of elements in place to permit a phased update of the user's unit in accordance with his needs.

  7. Analysis of requirements for teaching materials based on the course bioinformatics for plant metabolism

    Science.gov (United States)

    Balqis, Widodo, Lukiati, Betty; Amin, Mohamad

    2017-05-01

    A way to improve the quality of learning in the course of Plant Metabolism in the Department of Biology, State University of Malang, is to develop teaching materials. This research evaluates the needs of bioinformatics-based teaching material in the course Plant Metabolism by the Analyze, Design, Develop, Implement, and Evaluate (ADDIE) development model. Data were collected through questionnaires distributed to the students in the Plant Metabolism course of the Department of Biology, University of Malang, and analysis of the plan of lectures semester (RPS). Learning gains of this course show that it is not yet integrated into the field of bioinformatics. All respondents stated that plant metabolism books do not include bioinformatics and fail to explain the metabolism of a chemical compound of a local plant in Indonesia. Respondents thought that bioinformatics can explain examples and metabolism of a secondary metabolite analysis techniques and discuss potential medicinal compounds from local plants. As many as 65% of the respondents said that the existing metabolism book could not be used to understand secondary metabolism in lectures of plant metabolism. Therefore, the development of teaching materials including plant metabolism-based bioinformatics is important to improve the understanding of the lecture material in plant metabolism.

  8. Many multicenter trials had few events per center, requiring analysis via random-effects models or GEEs.

    Science.gov (United States)

    Kahan, Brennan C; Harhay, Michael O

    2015-12-01

    Adjustment for center in multicenter trials is recommended when there are between-center differences or when randomization has been stratified by center. However, common methods of analysis (such as fixed-effects, Mantel-Haenszel, or stratified Cox models) often require a large number of patients or events per center to perform well. We reviewed 206 multicenter randomized trials published in four general medical journals to assess the average number of patients and events per center and determine whether appropriate methods of analysis were used in trials with few patients or events per center. The median number of events per center/treatment arm combination for trials using a binary or survival outcome was 3 (interquartile range, 1-10). Sixteen percent of trials had less than 1 event per center/treatment combination, 50% fewer than 3, and 63% fewer than 5. Of the trials which adjusted for center using a method of analysis which requires a large number of events per center, 6% had less than 1 event per center-treatment combination, 25% fewer than 3, and 50% fewer than 5. Methods of analysis that allow for few events per center, such as random-effects models or generalized estimating equations (GEEs), were rarely used. Many multicenter trials contain few events per center. Adjustment for center using random-effects models or GEE with model-based (non-robust) standard errors may be beneficial in these scenarios. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Development of realistic thermal-hydraulic system analysis codes ; development of thermal hydraulic test requirements for multidimensional flow modeling

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Kune Yull; Yoon, Sang Hyuk; Noh, Sang Woo; Lee, Il Suk [Seoul National University, Seoul (Korea)

    2002-03-01

    This study is concerned with developing a multidimensional flow model required for the system analysis code MARS to more mechanistically simulate a variety of thermal hydraulic phenomena in the nuclear stem supply system. The capability of the MARS code as a thermal hydraulic analysis tool for optimized system design can be expanded by improving the current calculational methods and adding new models. In this study the relevant literature was surveyed on the multidimensional flow models that may potentially be applied to the multidimensional analysis code. Research items were critically reviewed and suggested to better predict the multidimensional thermal hydraulic behavior and to identify test requirements. A small-scale preliminary test was performed in the downcomer formed by two vertical plates to analyze multidimensional flow pattern in a simple geometry. The experimental result may be applied to the code for analysis of the fluid impingement to the reactor downcomer wall. Also, data were collected to find out the controlling parameters for the one-dimensional and multidimensional flow behavior. 22 refs., 40 figs., 7 tabs. (Author)

  10. Analysis of spatial patterns informs community assembly and sampling requirements for Collembola in forest soils

    Science.gov (United States)

    Dirilgen, Tara; Juceviča, Edite; Melecis, Viesturs; Querner, Pascal; Bolger, Thomas

    2018-01-01

    The relative importance of niche separation, non-equilibrial and neutral models of community assembly has been a theme in community ecology for many decades with none appearing to be applicable under all circumstances. In this study, Collembola species abundances were recorded over eleven consecutive years in a spatially explicit grid and used to examine (i) whether observed beta diversity differed from that expected under conditions of neutrality, (ii) whether sampling points differed in their relative contributions to overall beta diversity, and (iii) the number of samples required to provide comparable estimates of species richness across three forest sites. Neutrality could not be rejected for 26 of the forest by year combinations. However, there is a trend toward greater structure in the oldest forest, where beta diversity was greater than predicted by neutrality on five of the eleven sampling dates. The lack of difference in individual- and sample-based rarefaction curves also suggests randomness in the system at this particular scale of investigation. It seems that Collembola communities are not spatially aggregated and assembly is driven primarily by neutral processes particularly in the younger two sites. Whether this finding is due to small sample size or unaccounted for environmental variables cannot be determined. Variability between dates and sites illustrates the potential of drawing incorrect conclusions if data are collected at a single site and a single point in time.

  11. Analysis of diplopia associated with thyroid-associated ophthalmopathy requiring surgical treatment

    Energy Technology Data Exchange (ETDEWEB)

    Funaki, Chika; Yamazaki, Sei; Maeda, Toshine; Inoue, Yoichi [Olympia Eye Hospital, Tokyo (Japan)

    2003-03-01

    The purpose of this study was to analyze diplopia associated with thyroid-associated ophthalmopathy requiring surgical treatment. Five hundred patients operated upon for diplopia by a single surgeon were included in this study. Stretching of extraocular muscles was evaluated by orbital magnetic resonance imaging (MRI) or computed tomography (CT). Ocular motility was evaluated in 9 positions of gaze using the Hess chart and field of fixation and duction test. Surgical treatment for diplopia was placement of an adjustable suture. Two hundred-twenty-four patients were male (mean age 53.9 years) and 276 patients were female (mean age 52.1 years). Three hundred-seventy patients (70%) had unilateral ocular motility dysfunction and 130 patients had bilateral dysfunction. In patients with unilateral dysfunction, the frequency of each direction of gaze dysfunction was as follows: upward gaze, 63.2%; outward, 6.8%; downward, 16.5%; inward, 0.8%; and complex, 12.7%. In patients with bilateral dysfunction, the frequency of each direction of gaze dysfunction was as follows: 11.5%, 41.5%, 5.4%, 0%, and 41.5% respectively. The majority of patients in this study had unilateral ocular motility. The most frequent direction of gaze restriction was upward in those with unilateral diplopia and outward and complex in those with bilateral diplopia. Stretching of the lateral or medial rectus muscle alone occurred very rarely in this population. (author)

  12. Students classified as LD and the college foreign language requirement: a quantitative analysis.

    Science.gov (United States)

    Sparks, R L; Philips, L; Ganschow, L; Javorsky, J

    1999-01-01

    This study was conducted to determine whether students classified as learning disabled (LD) who were permitted to substitute courses for the college foreign language (FL) requirement at one university would display significant cognitive and academic achievement differences when grouped by level of discrepancy between IQ and achievement, by discrepancy between achievement according to different measures, and by level of performance on phonological-orthographic processing measures, on the Modern Language Aptitude Test (MLAT), and in FL courses. Results showed that there were no differences among students with different levels of discrepancy (i.e., 1.50 SD) on MLAT and American College Testing (ACT) scores, graduating grade point average (GPA) or college FL GPA. Results also showed that among students who scored below versus at or above the 25th percentile on phonological-orthographic processing measures, there were no differences on measures of IQ, ACT, MLAT, and GPA, as well as most measures of academic achievement. Implications for the use of the LD label to grant FL course substitutions or waivers, use of the MLAT in the diagnostic and course substitution/waiver process, and the validity and reliability of traditional criteria for the classification as LD are discussed.

  13. EUROPEAN INTEGRATION: A MULTILEVEL PROCESS THAT REQUIRES A MULTILEVEL STATISTICAL ANALYSIS

    Directory of Open Access Journals (Sweden)

    Roxana-Otilia-Sonia HRITCU

    2015-11-01

    Full Text Available A process of market regulation and a system of multi-level governance and several supranational, national and subnational levels of decision making, European integration subscribes to being a multilevel phenomenon. The individual characteristics of citizens, as well as the environment where the integration process takes place, are important. To understand the European integration and its consequences it is important to develop and test multi-level theories that consider individual-level characteristics, as well as the overall context where individuals act and express their characteristics. A central argument of this paper is that support for European integration is influenced by factors operating at different levels. We review and present theories and related research on the use of multilevel analysis in the European area. This paper draws insights on various aspects and consequences of the European integration to take stock of what we know about how and why to use multilevel modeling.

  14. A scenario analysis of the future residential requirements for people with mental health problems in Eindhoven.

    Science.gov (United States)

    Bierbooms, Joyce J P A; Bongers, Inge M B; van Oers, Hans A M

    2011-01-06

    Despite large-scale investments in mental health care in the community since the 1990 s, a trend towards reinstitutionalization has been visible since 2002. Since many mental health care providers regard this as an undesirable trend, the question arises: In the coming 5 years, what types of residence should be organized for people with mental health problems? The purpose of this article is to provide mental health care providers, public housing corporations, and local government with guidelines for planning organizational strategy concerning types of residence for people with mental health problems. A scenario analysis was performed in four steps: 1) an exploration of the external environment; 2) the identification of key uncertainties; 3) the development of scenarios; 4) the translation of scenarios into guidelines for planning organizational strategy. To explore the external environment a document study was performed, and 15 semi-structured interviews were conducted. During a workshop, a panel of experts identified two key uncertainties in the external environment, and formulated four scenarios. The study resulted in four scenarios: 1) Integrated and independent living in the community with professional care; 2) Responsible healthcare supported by society; 3) Differentiated provision within the walls of the institution; 4) Residence in large-scale institutions but unmet need for care. From the range of aspects within the different scenarios, the panel was able to work out concrete guidelines for planning organizational strategy. In the context of residence for people with mental health problems, the focus should be on investment in community care and their re-integration into society. A joint effort is needed to achieve this goal. This study shows that scenario analysis leads to useful guidelines for planning organizational strategy in mental health care.

  15. Southwest Project: resource/institutional requirements analysis. Volume II. Technical studies

    Energy Technology Data Exchange (ETDEWEB)

    Ormsby, L. S.; Sawyer, T. G.; Brown, Dr., M. L.; Daviet, II, L. L.; Weber, E. R.; Brown, J. E.; Arlidge, J. W.; Novak, H. R.; Sanesi, Norman; Klaiman, H. C.; Spangenberg, Jr., D. T.; Groves, D. J.; Maddox, J. D.; Hayslip, R. M.; Ijams, G.; Lacy, R. G.; Montgomery, J.; Carito, J. A.; Ballance, J. W.; Bluemle, C. F.; Smith, D. N.; Wehrey, M. C.; Ladd, K. L.; Evans, Dr., S. K.; Guild, D. H.; Brodfeld, B.; Cleveland, J. A.; Hicks, K. L.; Noga, M. W.; Ross, A. M.

    1979-12-01

    The project provides information which could be used to accelerate the commercialization and market penetration of solar electric generation plants in the southwestern region of the United States. The area of concern includes Arizona, California, Colorado, Nevada, New Mexico, Utah, and sections of Oklahoma and Texas. The project evaluated the potential integration of solar electric generating facilities into the existing electric grids of the region through the year 2000. The technologies included wind energy conversion, solar thermal electric, solar photovoltaic conversion, and hybrid solar electric systems. Each of the technologies considered, except hybrid solar electric, was paired with a compatible energy storage system to improve plant performance and enhance applicability to a utility grid system. The hybrid concept utilizes a conventionally-fueled steam generator as well as a solar steam generator so it is not as dependent upon the availability of solar energy as are the other concepts. Operation of solar electric generating plants in conjunction with existing hydroelectric power facilities was also studied. The participants included 12 electric utility companies and a state power authority in the southwestern US, as well as a major consulting engineering firm. An assessment of the state-of-the-art of solar electric generating plants from an electric utility standpoint; identification of the electric utility industry's technical requirements and considerations for solar electric generating plants; estimation of the capital investment, operation, and maintenance costs for solar electric generating plants; and determination of the capital investment of conventional fossil and nuclear electric generating plants are presented. (MCW)

  16. [Surgical treatment of Marfan syndrome; analysis of the patients required multiple surgical interventions].

    Science.gov (United States)

    Yamazaki, F; Shimamoto, M; Fujita, S; Nakai, M; Aoyama, A; Chen, F; Nakata, T; Yamada, T

    2002-07-01

    Without treatment, the life expectancy of patients with Marfan syndrome is reduced by the associated cardiovascular abnormalities. In this study, we reviewed our experience of the patients with Marfan syndrome who required multiple surgical interventions to identify the optimal treatment for these patients. Between January 1986 and December 2000, 44 patients with Marfan syndrome were operated on at Shizuoka City Hospital (SCH). Among them, 10 patients (22.7%) underwent multiple surgical interventions. There were 5 male and 5 female patients with a mean age of 40.6 +/- 16.1 years at the initial surgery. Only one patient was operated on at another hospital for his first, second, and third operations. His fourth operation was carried out at SCH. The remaining 9 patients underwent a total of 14 additional surgical procedures at SCH. Computed tomography (CT) scans were taken every 6 months postoperatively, and aortic diameter greater than 60 mm was considered as the indication for the additional surgery. There were no early death and one late death. The causes of additional surgery were enlargement of true aneurysm in 6, enlargement of residual dissection in 4, new dissection in 4, false aneurysm at the coronary anastomosis of Bentall procedure in 1. In 9 patients, both ascending and descending aorta were replaced. Among these 9 patients, only 3 patients underwent total arch replacement, and remaining 6 patients had their arch left in place with or without dissection. Our current strategy of the treatment of Marfan patients with acute type A dissection is total arch replacement with an elephant trunk at the initial emergent surgery.

  17. Requirement analysis to promote small-sized E-waste collection from consumers.

    Science.gov (United States)

    Mishima, Kuniko; Nishimura, Hidekazu

    2016-02-01

    The collection and recycling of small-sized waste electrical and electronic equipment is an emerging problem, since these products contain certain amounts of critical metals and rare earths. Even if the amount is not large, having a few supply routes for such recycled resources could be a good strategy to be competitive in a world of finite resources. The small-sized e-waste sometimes contains personal information, therefore, consumers are often reluctant to put them into recycling bins. In order to promote the recycling of E-waste, collection of used products from the consumer becomes important. Effective methods involving incentives for consumers might be necessary. Without such methods, it will be difficult to achieve the critical amounts necessary for an efficient recycling system. This article focused on used mobile phones among information appliances as the first case study, since it contains relatively large amounts of valuable metals compared with other small-sized waste electrical and electronic equipment and there are a large number of products existing in the market. The article carried out surveys to determine what kind of recycled material collection services are preferred by consumers. The results clarify that incentive or reward money alone is not a driving force for recycling behaviour. The article discusses the types of effective services required to promote recycling behaviour. The article concludes that securing information, transferring data and providing proper information about resources and environment can be an effective tool to encourage a recycling behaviour strategy to promote recycling, plus the potential discount service on purchasing new products associated with the return of recycled mobile phones. © The Author(s) 2015.

  18. AN ANALYSIS OF TECHNICAL SECURITY CONTROL REQUIREMENTS FOR DIGITAL I&C SYSTEMS IN NUCLEAR POWER PLANTS

    Directory of Open Access Journals (Sweden)

    JAE-GU SONG

    2013-10-01

    Full Text Available Instrumentation and control systems in nuclear power plants have been digitalized for the purpose of maintenance and precise operation. This digitalization, however, brings out issues related to cyber security. In the most recent past, international standard organizations, regulatory institutes, and research institutes have performed a number of studies addressing these systems cyber security. In order to provide information helpful to the system designers in their application of cyber security for the systems, this paper presents methods and considerations to define attack vectors in a target system, to review and select the requirements in the Regulatory Guide 5.71, and to integrate the results to identify applicable technical security control requirements. In this study, attack vectors are analyzed through the vulnerability analyses and penetration tests with a simplified safety system, and the elements of critical digital assets acting as attack vectors are identified. Among the security control requirements listed in Appendices B and C to Regulatory Guide 5.71, those that should be implemented into the systems are selected and classified in groups of technical security control requirements using the results of the attack vector analysis. For the attack vector elements of critical digital assets, all the technical security control requirements are evaluated to determine whether they are applicable and effective, and considerations in this evaluation are also discussed. The technical security control requirements in three important categories of access control, monitoring and logging, and encryption are derived and grouped according to the elements of attack vectors as results for the sample safety system.

  19. Nuclear data for fission reactor core design and safety analysis: Requirements and status of accuracy of nuclear data

    International Nuclear Information System (INIS)

    Rowlands, J.L.

    1984-01-01

    The types of nuclear data required for fission reactor design and safety analysis, and the ways in which the data are represented and approximated for use in reactor calculations, are summarised first. The relative importance of different items of nuclear data in the prediction of reactor parameters is described and ways of investigating the accuracy of these data by evaluating related integral measurements are discussed. The use of sensitivity analysis, together with estimates of the uncertainties in nuclear data and relevant integral measurements, in assessing the accuracy of prediction of reactor parameters is described. The inverse procedure for deciding nuclear data requirements from the target accuracies for prediction of reactor parameters follows on from this. The need for assessments of the uncertainties in nuclear data evaluations and the form of the uncertainty information is discussed. The status of the accuracies of predictions and nuclear data requirements are then summarised. The reactor parameters considered include: (a) Criticality conditions, conversion and burn-up effects. (b) Energy production and deposition, decay heating, irradiation damage, dosimetry and induced radioactivity. (c) Kinetics characteristics and control, including temperature, power and coolant density coefficients, delayed neutrons and control absorbers. (author)

  20. Power line conductor icing prevention by the Joule effect : parametric analysis and energy requirements

    Energy Technology Data Exchange (ETDEWEB)

    Peter, Z.; Farzaneh, M.; Kiss, L.I. [Quebec Univ., Chicoutimi, PQ (Canada). Industrial Chair on Atmospheric Icing of Power Network Equipment

    2005-07-01

    A mathematical model to calculate the minimum current intensity needed to prevent potentially damaging ice accretion on power line conductors was presented. The influence of atmospheric parameters such as wind speed, air temperature and liquid water were considered. Energy analysis was developed for an aluminum and steel reinforced conductor with circular cylindrical wire and concentric layers. Atmospheric parameters and the duration of the freezing conditions were considered with reference to the Joule effect. The model was then compared with experiments and simulations performed at an icing wind tunnel and in a climate room. It was determined that the equivalent thermal conductivity of the conductor should be assessed to identify the temperature distribution in the power line conductor. The radial component of the thermal conductivity was estimated on the basis of experiments performed in the wind tunnel, which provided a good estimation of the equivalent thermal conductivity and overall heat transfer coefficient around the stranded conductor. Experimental results were compared with values obtained from theoretically equivalent conductivity models. It was observed that the convective heat transfer coefficients around stranded conductors were higher than around smooth cylinders, and that the mathematical calculations slightly overestimated the wind tunnel measurements due to difficulties in estimating the wetted surface and the overall convection heat transfer coefficient around a stranded conductor. The typical range for the equivalent thermal conductivity of stranded conductors was also presented. 13 refs., 1 tab., 11 figs.

  1. Adult active transport in the Netherlands: an analysis of its contribution to physical activity requirements.

    Directory of Open Access Journals (Sweden)

    Elliot Fishman

    Full Text Available Modern, urban lifestyles have engineered physical activity out of everyday life and this presents a major threat to human health. The Netherlands is a world leader in active travel, particularly cycling, but little research has sought to quantify the cumulative amount of physical activity through everyday walking and cycling.Using data collected as part of the Dutch National Travel Survey (2010 - 2012, this paper determines the degree to which Dutch walking and cycling contributes to meeting minimum level of physical activity of 150 minutes of moderate intensity aerobic activity throughout the week. The sample includes 74,465 individuals who recorded at least some travel on the day surveyed. As physical activity benefits are cumulative, all walking and cycling trips are analysed, including those to and from public transport. These trips are then converted into an established measure of physical activity intensity, known as metabolic equivalents of tasks. Multivariate Tobit regression models were performed on a range of socio-demographic, transport resources, urban form and meteorological characteristics.The results reveal that Dutch men and women participate in 24 and 28 minutes of daily physical activity through walking and cycling, which is 41% and 55% more than the minimum recommended level. It should be noted however that some 57% of the entire sample failed to record any walking or cycling, and an investigation of this particular group serves as an important topic of future research. Active transport was positively related with age, income, bicycle ownership, urban density and air temperature. Car ownership had a strong negative relationship with physically active travel.The results of this analysis demonstrate the significance of active transport to counter the emerging issue of sedentary lifestyle disease. The Dutch experience provides other countries with a highly relevant case study in the creation of environments and cultures that

  2. Energy use pattern and optimization of energy required for broiler production using data envelopment analysis

    Directory of Open Access Journals (Sweden)

    Sama Amid

    2016-06-01

    Full Text Available A literature review shows that energy consumption in agricultural production in Iran is not efficient and a high degree of inefficiency in broiler production exists in Iran. Energy consumption of broiler production in Ardabil province of Iran was studied and the non-parametric method of data envelopment analysis (DEA was used to analyze energy efficiency, separate efficient from inefficient broiler producers, and calculate wasteful use of energy to optimize energy. Data was collected using face-to-face questionnaires from 70 broiler farmers in the study area. Constant returns to scale (CCR and variable returns to scale (BCC models of DEA were applied to assess the technical efficiency of broiler production. The results indicated that total energy use was 154,283 MJ (1000 bird−1 and the share of fuel at 61.4% was the highest of all inputs. The indices of energy efficiency, energy productivity, specific energy, and net energy were found to be 0.18, 0.02 kg MJ−1, 59.56 MJ kg−1, and −126,836 MJ (1000 bird−1, respectively. The DEA results revealed that 40% and 22.86% of total units were efficient based on the CCR and BCC models, respectively. The average technical, pure technical, and scale efficiency of broiler farmers was 0.88, 0.93, and 0.95, respectively. The results showed that 14.53% of total energy use could be saved by converting the present units to optimal conditions. The contribution of fuel input to total energy savings was 72% and was the largest share, followed by feed and electricity energy inputs. The results of this study indicate that there is good potential for increasing energy efficiency of broiler production in Iran by following the recommendations for efficient energy use.

  3. Functional analysis of TMLH variants and definition of domains required for catalytic activity and mitochondrial targeting.

    Science.gov (United States)

    Monfregola, Jlenia; Cevenini, Armando; Terracciano, Antonio; van Vlies, Naomi; Arbucci, Salvatore; Wanders, Ronald J A; D'Urso, Michele; Vaz, Frédéric M; Ursini, Matilde Valeria

    2005-09-01

    epsilon-N-Trimethyllysine hydroxylase (TMLH) (EC 1.14.11.8) is a non-heme-ferrous iron hydroxylase, Fe(++) and 2-oxoglutarate (2OG) dependent, catalyzing the first of four enzymatic reactions of the highly conserved carnitine biosynthetic pathway. Otherwise from all the other enzymes of carnitine biosynthesis, TMLH was found to be associated to the mitochondrial fraction. We here report molecular cloning of two alternative spliced forms of TMLH, which appear ubiquitously expressed in human adult and fetal tissues. The deduced proteins are designated TMLH-a and TMLH-b, and contain 421 and 399 amino acids, respectively. They share the first N-terminal 332 amino acids, including a mitochondrial targeting signal, but diverge at the C-terminal end. TMLH-a and TMLH-b exogenous expression in COS-1 cells shows that the first 15 amino acids are necessary and sufficient for mitochondrial import. Furthermore, comparative evolutionary analysis of the C-terminal portion of TMLH-a identifies a conserved domain characterized by a key triad of residues, His242-Glu244-His389 predicted to bind 2OG end. This sequence is conserved in the TMLH enzyme from all species but is partially substituted by a unique sequence in the TMLH-b variant. Indeed, TMLH-b is not functional by itself as well as a TMLH-H389L mutant produced by site directed mutagenesis. As great interest, we found that TMLH-b and TMLH-H389L, individually co-expressed with TMLH-a in COS-1 cells, negatively affect TMLH activity. Therefore, our studies on the TMLH alternative form provide relevant novel information, first that the C-terminal region of TMLH contains the main determinants for its enzymatic activity including a key H389 residue, and second that TMLH-b could act as a crucial physiological negative regulator of TMLH. Copyright 2005 Wiley-Liss, Inc.

  4. Ecological requirements of Abies alba in the French Alps derived from dendro-ecological analysis

    Energy Technology Data Exchange (ETDEWEB)

    Rolland, C.; Michalet, R.; Desplanque, C.; Petetin, A.; Aime, S. [Univ. Joseph Fourier, Grenoble (France). Centre de Biologie Alpine

    1999-06-01

    We used dendro-ecological techniques to investigate fundamental relationships between climate and growth of Abies alba (silver fir) in eastern France. Seven Abies forests in the Trieves region of the French Alps were chosen to represent a wide range of ecological conditions based on the results of previous forest vegetation surveys. In each forest, four trees were sampled in each of five different stands with two cores per tree. These 280 cores were studied using two separate dendro-ecological methods: the pointer years method (based on extreme growth events), and correlation functions between tree ring-widths and monthly climatic data. Data from 11 meteorological stations were combined to provide a regional analysis of precipitation and minimum and maximum temperatures. The two dendro-ecological methods appear to be complementary, as the first technique emphasizes common and low intensity linear correlations between ring-widths and climatic variations, and the second method emphasizes extreme and unusual climatic events such as exceptionally cold or dry years. Across all sites, drought in the previous year was consistently correlated with a low growth rate; however, other climatic variables varied substantially among sites. For example, drought in the current year reduced growth more in the low elevation sites than in the high elevation sites and severe winter frost reduced growth the most in the high altitude sites and the driest site. Moreover, certain growth responses are better correlated with the age of the stands, the canopy closure and the floristic composition of the community than the abiotic factors, emphasizing the value of dendro-ecological sampling based on phytosociological units 63 refs, 4 figs, 1 tab

  5. NG09 And CTBT On-Site Inspection Noble Gas Sampling and Analysis Requirements

    Science.gov (United States)

    Carrigan, Charles R.; Tanaka, Junichi

    2010-05-01

    A provision of the Comprehensive Test Ban Treaty (CTBT) allows on-site inspections (OSIs) of suspect nuclear sites to determine if the occurrence of a detected event is nuclear in origin. For an underground nuclear explosion (UNE), the potential success of an OSI depends significantly on the containment scenario of the alleged event as well as the application of air and soil-gas radionuclide sampling techniques in a manner that takes into account both the suspect site geology and the gas transport physics. UNE scenarios may be broadly divided into categories involving the level of containment. The simplest to detect is a UNE that vents a significant portion of its radionuclide inventory and is readily detectable at distance by the International Monitoring System (IMS). The most well contained subsurface events will only be detectable during an OSI. In such cases, 37 Ar and radioactive xenon cavity gases may reach the surface through either "micro-seepage" or the barometric pumping process and only the careful siting of sampling locations, timing of sampling and application of the most site-appropriate atmospheric and soil-gas capturing methods will result in a confirmatory signal. The OSI noble gas field tests NG09 was recently held in Stupava, Slovakia to consider, in addition to other field sampling and analysis techniques, drilling and subsurface noble gas extraction methods that might be applied during an OSI. One of the experiments focused on challenges to soil-gas sampling near the soil-atmosphere interface. During withdrawal of soil gas from shallow, subsurface sample points, atmospheric dilution of the sample and the potential for introduction of unwanted atmospheric gases were considered. Tests were designed to evaluate surface infiltration and the ability of inflatable well-packers to seal out atmospheric gases during sample acquisition. We discuss these tests along with some model-based predictions regarding infiltration under different near

  6. Aircraft Loss-of-Control: Analysis and Requirements for Future Safety-Critical Systems and Their Validation

    Science.gov (United States)

    Belcastro, Christine M.

    2011-01-01

    Loss of control remains one of the largest contributors to fatal aircraft accidents worldwide. Aircraft loss-of-control accidents are complex, resulting from numerous causal and contributing factors acting alone or more often in combination. Hence, there is no single intervention strategy to prevent these accidents. This paper summarizes recent analysis results in identifying worst-case combinations of loss-of-control accident precursors and their time sequences, a holistic approach to preventing loss-of-control accidents in the future, and key requirements for validating the associated technologies.

  7. On the evaluation of feed requirements and costs analysis of preirradiated fuel cycle operations for uranium fuelled light water reactors

    International Nuclear Information System (INIS)

    El Osery, I.A.; Yasso, K.A.; Abdel Salam, A.S.

    1982-01-01

    This work is a part of an integrated scheme for nuclear power cost evaluation. The paper gives a brief description of the different operations included to get enriched UO 2 in its final form. A Material Balance Sheet is developed to estimate quantitatively the input material reguirements to each fuel operation. An improved approach for fuel cost analysis is developed. The paper includes a complete FORTRAN listing for the computer program carried out for this purpose together with description of the program input data requirements and output facilities. Illustrative numerical results are provided

  8. Requirement analysis of testers qualified for aircraft compatibility test x-ray diagnostic and interventional radiology in Indonesia

    International Nuclear Information System (INIS)

    Diah Astuti Indarwati; Haendra Subekti

    2013-01-01

    Analysis of the need of Qualified Tester by calculating the number of test team to perform conformance test of diagnostic and interventional X-ray equipment has been done. This analysis was conducted in order to map the needs of Qualified Testers in Indonesia. As the conformance test certificate will be used in the licensing process, the availability of Tester will greatly affect the continuity and smoothness of the licensing process. The result shows the number of required test team is currently as much as 49 teams, while the availability of the test team is 7 test team. Thus there is still a large gap between the need and availability of the test team to perform conformance test. For the central and eastern of Indonesia on the scope of CT Scan, Mammography, Fluoroscopy and can only be met by tester in Java. (author)

  9. Lessons learned - development of the tritium facilities 5480.23 safety analysis report and technical safety requirements

    International Nuclear Information System (INIS)

    Cappucci, A.J. Jr.; Bowman, M.E.; Goff, L.

    1997-01-01

    A review was performed which identified open-quotes Lessons Learnedclose quotes from the development of the 5480.23 Tritium Safety Analysis Report (SAR) and the Technical Safety Requirements (TSR) for the Tritium Facilities (TF). The open-quotes Lessons Learnedclose quotes were based on an evaluation of the use of the SRS procedures, processes, and work practices which contributed to the success or lack thereof. This review also identified recommendations and suggestions for improving the development of SARs and TSRs at SRS. The 5480.23 SAR describes the site for the TF, the various process systems in the process buildings, a complete hazards and accident analysis of the most significant hazards affecting the nearby offsite population, and the selection of safety systems, structures, and components to protect both the public and site workers. It also provides descriptions of important programs and processes which add defense in depth to public and worker protection

  10. A Requirements-Based Exploration of Open-Source Software Development Projects--Towards a Natural Language Processing Software Analysis Framework

    Science.gov (United States)

    Vlas, Radu Eduard

    2012-01-01

    Open source projects do have requirements; they are, however, mostly informal, text descriptions found in requests, forums, and other correspondence. Understanding such requirements provides insight into the nature of open source projects. Unfortunately, manual analysis of natural language requirements is time-consuming, and for large projects,…

  11. Fracture toughness requirements of reactor vessel material in evaluation of the safety analysis report of nuclear power plants

    International Nuclear Information System (INIS)

    Widia Lastana Istanto

    2011-01-01

    Fracture toughness requirements of reactor vessel material that must be met by applicants for nuclear power plants construction permit has been investigated in this paper. The fracture toughness should be described in the Safety Analysis Reports (SARs) document that will be evaluated by the Nuclear Energy Regulatory Agency (BAPETEN). Because BAPETEN does not have a regulations or standards/codes regarding the material used for the reactor vessel, especially in the fracture toughness requirements, then the acceptance criteria that applied to evaluate the fracture toughness of reactor vessel material refers to the regulations/provisions from the countries that have been experienced in the operation of nuclear power plants, such as from the United States, Japan and Korea. Regulations and standards used are 10 CFR Part 50, ASME and ASTM. Fracture toughness of reactor vessel materials are evaluated to ensure compliance of the requirements and provisions of the Regulatory Body and the applicable standards, such as ASME or ASTM, in order to assure a reliability and integrity of the reactor vessels as well as providing an adequate safety margin during the operation, testing, maintenance, and postulated accident conditions over the reactor vessel lifetime. (author)

  12. Comparative analysis of DOE Order 5820.2A, NRC, and EPA radioactive and mixed waste management requirements

    International Nuclear Information System (INIS)

    1991-07-01

    As directed by DOE-Headquarters and DOE-Idaho, the Radioactive Waste Technical Support Program (TSP) drafted an analysis of DOE Order 5820. 2A on ''Radioactive Waste Management'' to develop guidelines and criteria for revising the Order. This comparative matrix is a follow up to the earlier analysis. This matrix comparing the requirements of DOE Order 5820.2A with Nuclear Regulatory Commission (NRC) and Environmental Protection Agency (EPA) regulations was prepared at the request of EM-30. The matrix compares DOE Order 5820.2A with the following: NRC regulations in 10 CFR Part 61 on ''Licensing Requirements for Land Disposal of Radioactive Waste''; NRC regulations in 10 CFR Part 60 on ''Disposal of High-Level Radioactive Waste in Geologic Repositories''; EPA regulations in 40 CFR Part 191 on ''Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Waste''; EPA regulations in 40 FR Part 192 on ''Health and Environmental Protection Standards for Uranium and Thorium Mill Tailing''; and EPA regulations under the Resource Conservation and Recovery Act

  13. Sequence requirements of the HIV-1 protease flap region determined by saturation mutagenesis and kinetic analysis of flap mutants

    Science.gov (United States)

    Shao, Wei; Everitt, Lorraine; Manchester, Marianne; Loeb, Daniel D.; Hutchison, Clyde A.; Swanstrom, Ronald

    1997-01-01

    The retroviral proteases (PRs) have a structural feature called the flap, which consists of a short antiparallel β-sheet with a turn. The flap extends over the substrate binding cleft and must be flexible to allow entry and exit of the polypeptide substrates and products. We analyzed the sequence requirements of the amino acids within the flap region (positions 46–56) of the HIV-1 PR. The phenotypes of 131 substitution mutants were determined using a bacterial expression system. Four of the mutant PRs with mutations in different regions of the flap were selected for kinetic analysis. Our phenotypic analysis, considered in the context of published structures of the HIV-1 PR with a bound substrate analogs, shows that: (i) Met-46 and Phe-53 participate in hydrophobic interactions on the solvent-exposed face of the flap; (ii) Ile-47, Ile-54, and Val-56 participate in hydrophobic interactions on the inner face of the flap; (iii) Ile-50 has hydrophobic interactions at the distance of both the δ and γ carbons; (iv) the three glycine residues in the β-turn of the flap are virtually intolerant of substitutions. Among these mutant PRs, we have identified changes in both kcat and Km. These results establish the nature of the side chain requirements at each position in the flap and document a role for the flap in both substrate binding and catalysis. PMID:9122179

  14. Good for your health? An analysis of the requirements for scientific substantiation in European health claims regulation

    Directory of Open Access Journals (Sweden)

    Oliver Todt

    2016-05-01

    Full Text Available Objective. To identify the various types of evidence, as well as their relative importance in European health claims regulation, in order to analyze the consequences for consumer protection of the requirements for scientific substantiation in this regulation. Materials and methods. Qualitative analysis of various documents relevant to the regulatory process, particularly as to the implications of the standards of proof for the functional food market, as well as consumer behavior. Results. European regulation defines a hierarchy of evidence that turns randomized controlled trials into a necessary and sufficient condition for health claim autho- rizations. Conclusions. Consumer protection can be interpreted in different manners. High standards of proof protect consumers from false information about the health outcomes of functional foods, while lower standards lead to more, albeit less accurate information about such outcomes being available to consumers.

  15. Radiation therapists' perceptions of the minimum level of experience required to perform portal image analysis

    Energy Technology Data Exchange (ETDEWEB)

    Rybovic, Michala [Discipline of Medical Radiation Sciences, Faculty of Health Sciences, University of Sydney, PO Box 170, Lidcombe, NSW 1825 (Australia)], E-mail: mryb6983@mail.usyd.edu.au; Halkett, Georgia K. [Western Australia Centre for Cancer and Palliative Care, Curtin University of Technology, Health Research Campus, GPO Box U1987, Perth, WA 6845 (Australia)], E-mail: g.halkett@curtin.edu.au; Banati, Richard B. [Faculty of Health Sciences, Brain and Mind Research Institute - Ramaciotti Centre for Brain Imaging, University of Sydney, PO Box 170, Lidcombe, NSW 1825 (Australia)], E-mail: r.banati@usyd.edu.au; Cox, Jennifer [Discipline of Medical Radiation Sciences, Faculty of Health Sciences, University of Sydney, PO Box 170, Lidcombe, NSW 1825 (Australia)], E-mail: jenny.cox@usyd.edu.au

    2008-11-15

    Background and purpose: Our aim was to explore radiation therapists' views on the level of experience necessary to undertake portal image analysis and clinical decision making. Materials and methods: A questionnaire was developed to determine the availability of portal imaging equipment in Australia and New Zealand. We analysed radiation therapists' responses to a specific question regarding their opinion on the minimum level of experience required for health professionals to analyse portal images. We used grounded theory and a constant comparative method of data analysis to derive the main themes. Results: Forty-six radiation oncology facilities were represented in our survey, with 40 questionnaires being returned (87%). Thirty-seven radiation therapists answered our free-text question. Radiation therapists indicated three main themes which they felt were important in determining the minimum level of experience: 'gaining on-the-job experience', 'receiving training' and 'working as a team'. Conclusions: Radiation therapists indicated that competence in portal image review occurs via various learning mechanisms. Further research is warranted to determine perspectives of other health professionals, such as radiation oncologists, on portal image review becoming part of radiation therapists' extended role. Suitable training programs and steps for implementation should be developed to facilitate this endeavour.

  16. Software safety analysis on the model specified by NuSCR and SMV input language at requirements phase of software development life cycle using SMV

    International Nuclear Information System (INIS)

    Koh, Kwang Yong; Seong, Poong Hyun

    2005-01-01

    Safety-critical software process is composed of development process, verification and validation (V and V) process and safety analysis process. Safety analysis process has been often treated as an additional process and not found in a conventional software process. But software safety analysis (SSA) is required if software is applied to a safety system, and the SSA shall be performed independently for the safety software through software development life cycle (SDLC). Of all the phases in software development, requirements engineering is generally considered to play the most critical role in determining the overall software quality. NASA data demonstrate that nearly 75% of failures found in operational software were caused by errors in the requirements. The verification process in requirements phase checks the correctness of software requirements specification, and the safety analysis process analyzes the safety-related properties in detail. In this paper, the method for safety analysis at requirements phase of software development life cycle using symbolic model verifier (SMV) is proposed. Hazard is discovered by hazard analysis and in other to use SMV for the safety analysis, the safety-related properties are expressed by computation tree logic (CTL)

  17. Orbital transfer vehicle concept definition and system analysis study. Volume 2: OTV concept definition and evaluation. Book 1: Mission and system requirements

    Science.gov (United States)

    Kofal, Allen E.

    1987-01-01

    The mission and system requirements for the concept definition and system analysis of the Orbital Transfer Vehicle (OTV) are established. The requirements set forth constitute the single authority for the selection, evaluation, and optimization of the technical performance and design of the OTV. This requirements document forms the basis for the Ground and Space Based OTV concept definition analyses and establishes the physical, functional, performance and design relationships to STS, Space Station, Orbital Maneuvering Vehicle (OMV), and payloads.

  18. Defining climate modeling user needs: which data are actually required to support impact analysis and adaptation policy development?

    Science.gov (United States)

    Swart, R. J.; Pagé, C.

    2010-12-01

    -scientific stakeholders in government, civil society and the private sector, in a context which is different in many European countries. In the IS-ENES effort, a dialogue is set up between the communities in Europe, building on various existing research networks in the area of climate change impacts, vulnerability and adaptation. Generally, the data needs have not been well articulated. If asked, people working on impacts and adaptation routinely seem to ask for data with the highest possible resolution. However, in reality for many impact and adaptation applications this is not needed, and the large resulting data sets may exceed the analytical capacity of the impact researchers. For impact analysis often various types of climate indices, derived from primary climate model output variables, are required, including indices for extremes and in probabilistic format. Rather than making output from climate modeling generically available, e.g. through a climate service e-portal, context-specific tailoring of information for specific applications is important for effective use. This may require some level of interaction between the users and the data providers, dependent on the specific questions to be addressed.

  19. Estimating the oligoelement requirements of children subject to exclusively parenteral nutrition by means of neutron activation analysis

    International Nuclear Information System (INIS)

    Maziere, B.; Gros, J.; Comar, D.

    1979-01-01

    Because of the rich and varied food he eats, deficiencies in oligoelements of dietary origin are very rarely found in man. However, several cases of zinc and copper deficiency have been reported in adults and children subject to prolonged entirely parenteral nutrition. In the present case ten children (eight infants of less than 18 months and two children aged between 2 and 8 years) fed exclusively by intracardiac catheter on a reconstituted diet were studied. The serum concentrations of copper, manganese, selenium and zinc in the children fed on this artificial diet were measured by neutron activation and gamma spectrometry, both with and without chemical separation. The values obtained in the young patients and in controls of the same age were compared. The result of these comparisons and a study of the kinetics of serum concentrations in the patients (one analysis every 20 days for 90 days) enabled us to determine that there was a balanced intake of copper, an excess of manganese and a considerable deficiency in zinc and selenium. In view of these observations, the diet was modified and it was established that the serum oligoelement content followed changes in oligoelement intake. Thus the serum concentrations of selenium and zinc were restored in a few weeks - completely in the case of selenium with an intake three times higher (3 μg/kg/24 h) and incompletely in the case of zinc with the intake doubled (50 μg/kg/24 h). On the basis of these results and kinetic data on the mineral metabolism, we have been able to estimate the copper, manganese, selenium and zinc requirements of children undergoing parenteral nutrition. (author)

  20. Sequence analysis and molecular characterization of genes required for the biosynthesis of type 1 capsular polysaccharide in Staphylococcus aureus.

    Science.gov (United States)

    Lin, W S; Cunneen, T; Lee, C Y

    1994-11-01

    We previously cloned a 19.4-kb DNA region containing a cluster of genes affecting type 1 capsule production from Staphylococcus aureus M. Subcloning experiments showed that these capsule (cap) genes are localized in a 14.6-kb region. Sequencing analysis of the 14.6-kb fragment revealed 13 open reading frames (ORFs). Using complementation tests, we have mapped a collection of Cap- mutations in 10 of the 13 ORFs, indicating that these 10 genes are involved in capsule biosynthesis. The requirement for the remaining three ORFs in the synthesis of the capsule was demonstrated by constructing site-specific mutations corresponding to each of the three ORFs. Using an Escherichia coli S30 in vitro transcription-translation system, we clearly identified 7 of the 13 proteins predicted from the ORFs. Homology search between the predicted proteins and those in the data bank showed very high homology (52.3% identity) between capL and vipA, moderate homology (29% identity) between capI and vipB, and limited homology (21.8% identity) between capM and vipC. The vipA, vipB, and vipC genes have been shown to be involved in the biosynthesis of Salmonella typhi Vi antigen, a homopolymer polysaccharide consisting of N-acetylgalactosamino uronic acid, which is also one of the components of the staphylococcal type 1 capsule. The homology between these sets of genes therefore suggests that capL, capI, and capM may be involved in the biosynthesis of amino sugar, N-acetylgalactosamino uronic acid. In addition, the search showed that CapG aligned well with the consensus sequence of a family of acetyltransferases from various prokaryotic organisms, suggesting that CapG may be an acetyltransferase. Using the isogenic Cap- and Cap+ strains constructed in this study, we have confirmed that type 1 capsule is an important virulence factor in a mouse lethality test.

  1. Requiring collaboration: Hippocampal-prefrontal networks needed in spatial working memory and ageing. A multivariate analysis approach.

    Science.gov (United States)

    Zancada-Menendez, C; Alvarez-Suarez, P; Sampedro-Piquero, P; Cuesta, M; Begega, A

    2017-04-01

    Ageing is characterized by a decline in the processes of retention and storage of spatial information. We have examined the behavioural performance of adult rats (3months old) and aged rats (18months old) in a spatial complex task (delayed match to sample). The spatial task was performed in the Morris water maze and consisted of three sessions per day over a period of three consecutive days. Each session consisted of two trials (one sample and retention) and inter-session intervals of 5min. Behavioural results showed that the spatial task was difficult for middle aged group. This worse execution could be associated with impairments of processing speed and spatial information retention. We examined the changes in the neuronal metabolic activity of different brain regions through cytochrome C oxidase histochemistry. Then, we performed MANOVA and Discriminant Function Analyses to determine the functional profile of the brain networks that are involved in the spatial learning of the adult and middle-aged groups. This multivariate analysis showed two principal functional networks that necessarily participate in this spatial learning. The first network was composed of the supramammillary nucleus, medial mammillary nucleus, CA3, and CA1. The second one included the anterior cingulate, prelimbic, and infralimbic areas of the prefrontal cortex, dentate gyrus, and amygdala complex (basolateral l and central subregions). There was a reduction in the hippocampal-supramammilar network in both learning groups, whilst there was an overactivation in the executive network, especially in the aged group. This response could be due to a higher requirement of the executive control in a complex spatial memory task in older animals. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. Analysis of an ordered, comprehensive STM mutant library in infectious Borrelia burgdorferi: insights into the genes required for mouse infectivity.

    Directory of Open Access Journals (Sweden)

    Tao Lin

    Full Text Available The identification of genes important in the pathogenesis of Lyme disease Borrelia has been hampered by exceedingly low transformation rates in low-passage, infectious organisms. Using the infectious, moderately transformable B. burgdorferi derivative 5A18NP1 and signature-tagged versions of the Himar1 transposon vector pGKT, we have constructed a defined transposon library for the efficient genome-wide investigation of genes required for wild-type pathogenesis, in vitro growth, physiology, morphology, and plasmid replication. To facilitate analysis, the insertion sites of 4,479 transposon mutants were determined by sequencing. The transposon insertions were widely distributed across the entire B. burgdorferi genome, with an average of 2.68 unique insertion sites per kb DNA. The 10 linear plasmids and 9 circular plasmids had insertions in 33 to 100 percent of their predicted genes. In contrast, only 35% of genes in the 910 kb linear chromosome had incapacitating insertions; therefore, the remaining 601 chromosomal genes may represent essential gene candidates. In initial signature-tagged mutagenesis (STM analyses, 434 mutants were examined at multiple tissue sites for infectivity in mice using a semi-quantitative, Luminex-based DNA detection method. Examples of genes found to be important in mouse infectivity included those involved in motility, chemotaxis, the phosphoenolpyruvate phosphotransferase system, and other transporters, as well as putative plasmid maintenance genes. Availability of this ordered STM library and a high-throughput screening method is expected to lead to efficient assessment of the roles of B. burgdorferi genes in the infectious cycle and pathogenesis of Lyme disease.

  3. Requirements of a new communication technology for handover and the escalation of patient care: a multi-stakeholder analysis.

    Science.gov (United States)

    Johnston, Maximilian J; King, Dominic; Arora, Sonal; Cooper, Kerri; Panda, Neha Aparajita; Gosling, Rebecca; Singh, Kaushiki; Sanders, Bradley; Cox, Benita; Darzi, Ara

    2014-08-01

    In order to enable safe and efficient information transfer between health care professionals during clinical handover and escalation of care, existing communication technologies must be updated. This study aimed to provide a user-informed guide for the development of an application-based communication system (ABCS), tailored for use in patient handover and escalation of care. Current methods of inter-professional communication in health care along with information system needs for communication technology were identified through literature review. A focus group study was then conducted according to a topic guide developed by health innovation and safety researchers. Fifteen doctors and 11 nurses from three London hospitals participated in a mixture of homogeneous and heterogeneous sessions. The sessions were recorded and transcribed verbatim before being subjected to thematic analysis. Seventeen information system needs were identified from the literature review. Participants identified six themes detailing user perceptions of current communication technology, attitudes to smartphone technology and anticipated requirements of an application produced for handover and escalation of care. Participants were in favour of an ABCS over current methods and expressed enthusiasm for a system with integrated patient information and group-messaging functions. Despite concerns regarding confidentiality and information governance a robust guide for development and implementation of an ABCS was produced, taking input from multiple stakeholders into account. Handover and escalation of care are vital processes for patient safety and communication within these must be optimized. An ABCS for health care professionals would be a welcome innovation and may lead to improvements in patient safety. © 2014 John Wiley & Sons, Ltd.

  4. Economic analysis of solar industrial process heat systems: A methodology to determine annual required revenue and internal rate of return

    Science.gov (United States)

    Dickinson, W. C.; Brown, K. C.

    1981-08-01

    An economic evaluation of solar industrial process heat systems, is developed to determine the annual required revenue and the internal rate of return. First, a format is provided to estimate the solar system's installed cost, annual operating and maintenance expenses, and net annual solar energy delivered to the industrial process. The annual required revenue and the price of solar is calculated. The economic attractiveness of the potential solar investment can be determined by comparing the price of solar energy with the price of fossilfuel, both expressed in levelized terms. This requires calcuation of the internal rate of return on the solar investment or, in certain cases, the growth rate of return.

  5. Large Deployable Reflector (LDR) system concept and technology definition study. Analysis of space station requirements for LDR

    Science.gov (United States)

    Agnew, Donald L.; Vinkey, Victor F.; Runge, Fritz C.

    1989-01-01

    A study was conducted to determine how the Large Deployable Reflector (LDR) might benefit from the use of the space station for assembly, checkout, deployment, servicing, refurbishment, and technology development. Requirements that must be met by the space station to supply benefits for a selected scenario are summarized. Quantitative and qualitative data are supplied. Space station requirements for LDR which may be utilized by other missions are identified. A technology development mission for LDR is outlined and requirements summarized. A preliminary experiment plan is included. Space Station Data Base SAA 0020 and TDM 2411 are updated.

  6. Large Deployable Reflector (LDR) system concept and technology definition study. Analysis of space station requirements for LDR

    Science.gov (United States)

    Agnew, Donald L.; Vinkey, Victor F.; Runge, Fritz C.

    1989-04-01

    A study was conducted to determine how the Large Deployable Reflector (LDR) might benefit from the use of the space station for assembly, checkout, deployment, servicing, refurbishment, and technology development. Requirements that must be met by the space station to supply benefits for a selected scenario are summarized. Quantitative and qualitative data are supplied. Space station requirements for LDR which may be utilized by other missions are identified. A technology development mission for LDR is outlined and requirements summarized. A preliminary experiment plan is included. Space Station Data Base SAA 0020 and TDM 2411 are updated.

  7. Microarray Analysis of Transposon Insertion Mutants in Bacillus Anthracis: Global Identification of Genes Required for Sporulation and Germination

    National Research Council Canada - National Science Library

    Day , Jr., William A; Rasmussen, Suzanne L; Carpenter, Beth M; Peterson, Scott N; Friedlander, Arthur M

    2007-01-01

    .... The system, used to identify genes required for generation of the infectious anthrax spore, spore germination and optimal growth on rich medium, was predictive of the contribution of two conserved...

  8. Power requirements of biogas upgrading by water scrubbing and biomethane compression: Comparative analysis of various plant configurations

    International Nuclear Information System (INIS)

    Budzianowski, Wojciech M.; Wylock, Christophe E.; Marciniak, Przemysław A.

    2017-01-01

    Highlights: • Insights into power requirements of biomethane production from biogas are provided. • Process model is constructed, validated and simulated. • High-pressure and low-pressure plant operation in different configurations is compared. - Abstract: Biogas upgrading by water scrubbing followed by biomethane compression is an environmentally benign process. It may be achieved using various plant configurations characterised by various power requirements with associated effects on biomethane sustainability. Therefore, the current study has been undertaken to systematically investigate the power requirements of a range of water scrubbing options. Two groups of water scrubbing are analysed: (1) high pressure water scrubbing (HPWS) and (2) near-atmospheric pressure water scrubbing (NAPWS). A water scrubbing plant model is constructed, experimentally validated and simulated for seven upgrading plant configurations. Simulation results show that the power requirement of biogas upgrading in HPWS plants is mainly associated with biogas compression. In contrast, in NAPWS plants the main power is required for water pumping. In both plants the compression of the biomethane from atmosphereic pressure to 20 MPa also contributes remarkably. It is observed that the lowest specific power requirement can be obtained for a NAPWS plant without water regeneration (0.24 kW h/Nm"3 raw biogas) but this plant requires cheap water supply, e.g. outlet water from a sewage treatment plant or river. The second is HPWS without flash (0.29 kW h/Nm"3 raw biogas). All other HPWS with flash and NAPWS with water regeneration plants have specific power requirements between 0.30 and 0.33 kW h/Nm"3 raw biogas. Biogas compression without upgrading requires about 0.29 kW h/Nm"3 raw biogas. The thermodynamic efficiency of biogas upgrading is between 2.2% and 9.8% depending on the plant configuration while biomethane compression efficiency is higher, about 55%. This result implies that the

  9. Process control analysis requirement in NH3-H2 exchange bi-thermal Heavy Water Plant (Talcher) (Paper No. 6.8)

    International Nuclear Information System (INIS)

    Pattnaik, S.P.; Mishra, G.C.

    1992-01-01

    Heavy Water Plant, Talcher is based on bithermal NH 3 -H 2 exchange process. Isotopic exchange of deuterium takes place between gaseous hydrogen and liquid ammonia with potassium amide as catalyst. The process control analysis requirement in NH 3 -H 2 exchange dual temperature process is described. (author). 4 refs., 4 figs

  10. Analysis of the Deployed Military Health Information System and Its Ability to Satisfy Requirements of Public Law 105-85, Section 765

    National Research Council Canada - National Science Library

    Brown, David

    2005-01-01

    .... The information obtained in this analysis will be used to further identify the strengths and weaknesses of the deployed medical information systems in the MRS and determine the ability of the MRS to meet the requirements of Public Law 105-85.

  11. Climate change effects on Chikungunya transmission in Europe: geospatial analysis of vector's climatic suitability and virus' temperature requirements.

    Science.gov (United States)

    Fischer, Dominik; Thomas, Stephanie M; Suk, Jonathan E; Sudre, Bertrand; Hess, Andrea; Tjaden, Nils B; Beierkuhnlein, Carl; Semenza, Jan C

    2013-11-12

    Chikungunya was, from the European perspective, considered to be a travel-related tropical mosquito-borne disease prior to the first European outbreak in Northern Italy in 2007. This was followed by cases of autochthonous transmission reported in South-eastern France in 2010. Both events occurred after the introduction, establishment and expansion of the Chikungunya-competent and highly invasive disease vector Aedes albopictus (Asian tiger mosquito) in Europe. In order to assess whether these outbreaks are indicative of the beginning of a trend or one-off events, there is a need to further examine the factors driving the potential transmission of Chikungunya in Europe. The climatic suitability, both now and in the future, is an essential starting point for such an analysis. The climatic suitability for Chikungunya outbreaks was determined by using bioclimatic factors that influence, both vector and, pathogen. Climatic suitability for the European distribution of the vector Aedes albopictus was based upon previous correlative environmental niche models. Climatic risk classes were derived by combining climatic suitability for the vector with known temperature requirements for pathogen transmission, obtained from outbreak regions. In addition, the longest potential intra-annual season for Chikungunya transmission was estimated for regions with expected vector occurrences.In order to analyse spatio-temporal trends for risk exposure and season of transmission in Europe, climate change impacts are projected for three time-frames (2011-2040, 2041-2070 and 2071-2100) and two climate scenarios (A1B and B1) from the Intergovernmental Panel on Climate Change (IPCC). These climatic projections are based on regional climate model COSMO-CLM, which builds on the global model ECHAM5. European areas with current and future climatic suitability of Chikungunya transmission are identified. An increase in risk is projected for Western Europe (e.g. France and Benelux-States) in the

  12. Analysis of normative requirements for the development and implementation of a quality management system in Brazilian nuclear installations and activities

    International Nuclear Information System (INIS)

    Kibrit, Eduardo

    2008-01-01

    The present work identifies, characterizes and analyses the normative requirements for the development and implementation of quality management systems in Brazilian nuclear installations and activities. The requirements established in standards IAEA GS-R-3, IAEA GS-G-3.1, IAEA DS 349, NBR ISO 9001:2000 e CNEN-NN-1.16 are critically analyzed. A correlation matrix of the applicable standards is presented and the related topics among them are identified. The standards IAEA GS-R-3, IAEA GS-G-3.1 and IAEA DS 349 define general requirements for establishing, implementing, assessing and continually improving an integrated management system in nuclear installations and activities, in IAEA member countries. The standard NBR ISO 9001:2000 establishes general requirements for the implementation of a quality management system in all kinds of organizations. The standard CNEN NN-1.16 establishes the regulating requirements for the quality assurance systems and programs of nuclear installations, for licensing and authorization for operation of these installations in Brazil. The standard IAEA GS-R-3 that replaces the code IAEA 50-C-Q introduces the concept of 'Integrated Management System' for the nuclear area, in preference to the concepts of 'Quality Assurance' and 'Quality Management'. This new approach is aligned with the current tendency incorporating requirements of quality, safety, health, environment, security, economics and other in a unique management system. Examples of quality management systems implemented by Brazilian nuclear organizations and by nuclear organizations outside Brazil are analyzed and considered in the discussion of results. (author)

  13. Analysis of free geo-server software usability from the viewpoint of INSPIRE requirementsAnalysis of free geo-server software usability from the viewpoint of INSPIRE requirements

    Directory of Open Access Journals (Sweden)

    Tomasz  Grasza

    2014-06-01

    Full Text Available The paper presents selected server platforms based on free and open source license, coherent with the standards of the Open Geospatial Consortium. The presented programs are evaluated in the context of the INSPIRE Directive. The first part describes the requirements of the Directive, and afterwards presented are the pros and cons of each platform, to meet these demands. This article provides an answer to the question whether the use of free software can provide interoperable network services in accordance with the requirements of the INSPIRE Directive, on the occasion of presenting the application examples and practical tips on the use of particular programs.[b]Keywords[/b]: GIS, INSPIRE, free software, OGC, geoportal, network services, GeoServer, deegree, GeoNetwork

  14. How many new cancer patients in Europe will require radiotherapy by 2025? An ESTRO-HERO analysis

    DEFF Research Database (Denmark)

    Borras, Josep M; Lievens, Yolande; Barton, Michael

    2016-01-01

    BACKGROUND: The objective of this HERO study was to assess the number of new cancer patients that will require at least one course of radiotherapy by 2025. METHODS: European cancer incidence data by tumor site and country for 2012 and 2025 was extracted from the GLOBOCAN database. The projection ...

  15. Offshore Resource Assessment and Design Conditions: A Data Requirements and Gaps Analysis for Offshore Renewable Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, Dennis [National Renewable Energy Lab. (NREL), Golden, CO (United States); Frame, Caitlin [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Gill, Carrie [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Hanson, Howard [Florida Atlantic Univ., Boca Raton, FL (United States); Moriarty, Patrick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Powell, Mark [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Shaw, William J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wilczak, Jim [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Wynne, Jason [Energetics, Columbia, MD (United States)

    2012-03-01

    The offshore renewable energy industry requires accurate meteorological and oceanographic (“metocean”) data for evaluating the energy potential, economic viability, and engineering requirements of offshore renewable energy projects. It is generally recognized that currently available metocean data, instrumentation, and models are not adequate to meet all of the stakeholder needs on a national scale. Conducting wind and wave resource assessments and establishing load design conditions requires both interagency collaboration as well as valuable input from experts in industry and academia. Under the Department of Energy and Department of Interior Memorandum of Understanding, the Resource Assessment and Design Condition initiative supports collaborative national efforts by adding to core atmospheric and marine science knowledge relevant to offshore energy development. Such efforts include a more thorough understanding and data collection of key metocean phenomena such as wind velocity and shear; low-level jets; ocean, tidal, and current velocities; wave characteristics; geotechnical data relating to surface and subsurface characteristics; seasonal and diurnal variations; and the interaction among these conditions. Figure 1 presents a graphical representation of some metocean phenomena that can impact offshore energy systems. This document outlines the metocean observations currently available; those that are not available; and those that require additional temporal-spatial coverage, resolution, or processing for offshore energy in an effort to gather agreed-upon, needed observations.

  16. Requirements analysis and data model design for the development of vertical ERP solutions for the ceramic industry

    International Nuclear Information System (INIS)

    Oltra-Badenes, R. F.; Gil-Gomez, H.; Bellver-Lopez, R.; Asensio-Cuenta, S.

    2013-01-01

    Currently, the existing information systems, and specifically the ERP, can not give adequate support to the management of manufacturing companies of ceramic tile, because, among other reasons, not to contemplate the existence of tone, size and quality within the same product. This feature, caused by the lack of homogeneity of the product (LHP), generates various problems in managing the product through the different business processes, such as, stocks management, order management, the production management, etc. Thus, it is necessary to develop an ERP solution that is able to manage adequately the ceramic product, including tone, size and quality. In this paper we analyze the requirements of the ceramic sector, in terms of product identification, and propose a data model to meet these requirements. The model arises as a basic guide for the development of vertical ERP solutions tailored to the ceramic industry. (Author)

  17. Requirements and analysis of electromagnetic compatibility of safety-related instrumentation and control system in nuclear power plants

    International Nuclear Information System (INIS)

    Liu Sujuan

    2002-01-01

    The state-of-the-art instrumentation and control system and the influence of their application to the electromagnetic compatibility is analyzed. Based on the present situation of nuclear safety in China and relevant experiences from other countries, the author tries to probe into the requirements and test methods about how safety-related instrument and control system to accommodate electromagnetic interference, radio-frequency interference and power surges in the environments of nuclear power plant so as to develop Chinese safety standards

  18. Climate change impact and adaptation research requires integrated assessment and farming systems analysis: a case study in the Netherlands

    NARCIS (Netherlands)

    Reidsma, P.; Wolf, J.; Kanellopoulos, A.; Schaap, B.F.; Mandryk, M.; Verhagen, J.; Ittersum, van M.K.

    2015-01-01

    Rather than on crop modelling only, climate change impact assessments in agriculture need to be based on integrated assessment and farming systems analysis, and account for adaptation at different levels. With a case study for Flevoland, the Netherlands, we illustrate that (1) crop models cannot

  19. Final disposal of spent fuel in the Finnish bedrock. Scope and requirements for site-specific safety analysis

    International Nuclear Information System (INIS)

    1996-12-01

    The report is a summary of the research conducted in the period 1993 to 1996 into safety of spent fuel final disposal. The principal goal of the research in this period, as set in 1993, was to develop a strategy for site-specific safety analysis. At the same time efforts were to be continued to gather data and validate the technical approach for the analysis. The work aimed at having the data needed for the analysis available at the end of year 1998. A safety assessment update, TILA-96, prepared by VTT Energy, is published as a separate report. The assessment is based on the TVO-92 safety analysis, but takes into account the knowledge acquired after 1992 on safety aspects of the disposal system and the data gathered from the site investigations made by TVO and from the beginning of 1996, by Posiva. Since the site investigations are still ongoing and much of the data gathered still pending interpretation, only limited amount of new site-specific information has been available for the present assessment. (172 refs.)

  20. Application of sensitivity analysis to a quantitative assessment of neutron cross-section requirements for the TFTR: an interim report

    International Nuclear Information System (INIS)

    Gerstl, S.A.W.; Dudziak, D.J.; Muir, D.W.

    1975-09-01

    A computational method to determine cross-section requirements quantitatively is described and applied to the Tokamak Fusion Test Reactor (TFTR). In order to provide a rational basis for the priorities assigned to new cross-section measurements or evaluations, this method includes quantitative estimates of the uncertainty of currently available data, the sensitivity of important nuclear design parameters to selected cross sections, and the accuracy desired in predicting nuclear design parameters. Perturbation theory is used to combine estimated cross-section uncertainties with calculated sensitivities to determine the variance of any nuclear design parameter of interest

  1. A method of formal requirements analysis for NPP I and C systems based on object-oriented visual modeling with SCR

    International Nuclear Information System (INIS)

    Koo, S. R.; Seong, P. H.

    1999-01-01

    In this work, a formal requirements analysis method for Nuclear Power Plant (NPP) I and C systems is suggested. This method uses Unified Modeling Language (UML) for modeling systems visually and Software Cost Reduction (SCR) formalism for checking the system models. Since object-oriented method can analyze a document by the objects in a real system, UML models that use object-oriented method are useful for understanding problems and communicating with everyone involved in the project. In order to analyze the requirement more formally, SCR tabular notations is converted from UML models. To help flow-through from UML models to SCR specifications, additional syntactic extensions for UML notation and a converting procedure are defined. The combined method has been applied to Dynamic Safety System (DSS). From this application, three kinds of errors were detected in the existing DSS requirements

  2. Situation analysis of the knowledge, competencies and skill requirements of jobs in renewable energy technologies in Canada

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This paper described the technological and marketing challenges of developing Canada's vast renewable energy sources. Canada's basic educational infrastructure provides a good foundation for developing renewable energy technologies in the coming decade. The following renewable energy technologies were highlighted: photovoltaic power systems; wind power systems; micro and small hydro power systems; solar air heating systems; solar water heating systems; biomass combustion systems; and, geothermal ground source heat pump systems. Each renewable technology has its own set of requirements that may differ from traditional technologies. The labour market needs and human resource considerations for these seven renewable energy technology industries were outlined. One of the main challenges lies in preparing technicians in renewable energy technologies and ensuring the availability of appropriate labour sources in relation to demand. Observations on training in renewable energies were also summarized with reference to typical jobs available within each sector, job description for each technology, qualifications and the required knowledge, skills and aptitudes for each industry. A list of Canadian company contacts by technology area was included. refs.

  3. The strictest energy requirements in the world: An analysis of the path dependencies of a self-proclaimed success

    International Nuclear Information System (INIS)

    Hagelskjær Lauridsen, Erik; Stissing Jensen, Jens

    2013-01-01

    50 years of progressively strengthened energy requirements in the Danish building code appear to be a success, as the energy consumption has remained constant despite an increase in the total area in requirement of heating. This article however argues that the building code mechanism is heavily influenced by path dependent regime structuration processes, and that the mechanism constitutes a barrier to more radical developments within low energy housing. Few and poorly organized frontrunner activities within low energy housing have accordingly taken place in a Danish context during the past decades. Finally it is proposed that the current development within the energy system provides opportunities for cultivating an improved transitional awareness and for carrying out experimental activities that may challenge the path dependencies of prevailing regime structuration processes. - Highlights: ► We analyze the role of the building code energy strategy as an incumbent regime. ► Regime independent development activities such as passive houses are retained. ► Industry is characterized by adaptive capacity to support radical development. ► Adaptive capacity needs to be mobilized and configure by regime problematizations. ► Governance capabilities to achieve such a mobilization are presently in short supply.

  4. Whole-transcriptome analysis of endothelial to hematopoietic stem cell transition reveals a requirement for Gpr56 in HSC generation.

    Science.gov (United States)

    Solaimani Kartalaei, Parham; Yamada-Inagawa, Tomoko; Vink, Chris S; de Pater, Emma; van der Linden, Reinier; Marks-Bluth, Jonathon; van der Sloot, Anthon; van den Hout, Mirjam; Yokomizo, Tomomasa; van Schaick-Solernó, M Lucila; Delwel, Ruud; Pimanda, John E; van IJcken, Wilfred F J; Dzierzak, Elaine

    2015-01-12

    Hematopoietic stem cells (HSCs) are generated via a natural transdifferentiation process known as endothelial to hematopoietic cell transition (EHT). Because of small numbers of embryonal arterial cells undergoing EHT and the paucity of markers to enrich for hemogenic endothelial cells (ECs [HECs]), the genetic program driving HSC emergence is largely unknown. Here, we use a highly sensitive RNAseq method to examine the whole transcriptome of small numbers of enriched aortic HSCs, HECs, and ECs. Gpr56, a G-coupled protein receptor, is one of the most highly up-regulated of the 530 differentially expressed genes. Also, highly up-regulated are hematopoietic transcription factors, including the "heptad" complex of factors. We show that Gpr56 (mouse and human) is a target of the heptad complex and is required for hematopoietic cluster formation during EHT. Our results identify the processes and regulators involved in EHT and reveal the surprising requirement for Gpr56 in generating the first HSCs. © 2015 Solaimani Kartalaei et al.

  5. Requirement Volatility, Standardization and Knowledge Integration in Software Projects: An Empirical Analysis on Outsourced IS Development Projects

    Directory of Open Access Journals (Sweden)

    Rajesri Govindaraju

    2015-08-01

    Full Text Available Information systems development (ISD projects are highly complex, with different groups of people having  to collaborate and exchange their knowledge. Considering the intensity of knowledge exchange that takes place in outsourced ISD projects, in this study a conceptual model was developed, aiming to examine the influence of four antecedents, i.e. standardization, requirement volatility, internal integration, and external integration, on two dependent variables, i.e. process performance and product performance. Data  were collected from 46 software companies in four big cities in Indonesia. The collected data were examined to verify the proposed theoretical model using the partial least square structural equation modeling (PLS-SEM technique. The results show that process performance is significantly influenced by internal integration and standardization, while product performance is  significantly influenced by external integration and  requirement volatility. This study contributes  to a better understanding of how knowledge integration can be managed in outsourced ISD projects in view of increasing their success.

  6. Medical emergency aid through telematics: design, implementation guidelines and analysis of user requirements for the MERMAID project.

    Science.gov (United States)

    Anogianakis, G; Maglavera, S; Pomportsis, A; Bountzioukas, S; Beltrame, F; Orsi, G

    1998-01-01

    MERMAID is an EU financed telemedicine project with global reach and 24-h, multilingual capability. It aspires to provide a model for the provision of health care services based on the electronic transmission of medical information, via ISDN based videoconferencing. This model will not be limited to medical diagnostics but it will encompass all cases where the actual delivery of health care services involves a patient who is not located where the provider is. Its implementation requires the commissioning of an expensive telecommunications infrastructure and the exploration of a number of solutions. In fact, all categories of telemedical applications (audio and video conferencing, multimedia communications, flat file and image transfer with low, medium and high bandwidth data requirements) are considered while the full range of network choices (digital land lines, cellular/wireless, satellite and broadband) are being tested in terms of cost/performance tradeoffs that are inherent to them and the developmental stage each of these options occupies in their in its life cycle. Finally, out that MERMAID utilises advanced land based line transmission technologies to aid the remote patient by making available the specialist care that is best suited in the particular case.

  7. Analysis of technical-economic requirements for the construction of a solar power plant on the roof of the business building of the Electrical Engineering Institute 'Nikola Tesla'

    Directory of Open Access Journals (Sweden)

    Grbić Maja

    2014-01-01

    Full Text Available This paper presents an analysis of the technical-economic requirements for the construction of a solar power plant on the roof of the business building of the Electrical Engineering Institute 'Nikola Tesla' in Belgrade. Calculation of solar irradiation is performed and the conceptual design of the disposition of solar panels on the roof of the building is shown as well as their connections to the inverters. Conditions for connecting the plant to the distribution network are checked and an economic analysis of the project is performed.

  8. Mutational analysis of the RNA-binding domain of the Prunus necrotic ringspot virus (PNRSV) movement protein reveals its requirement for cell-to-cell movement

    OpenAIRE

    Herranz, M. Carmen; Sánchez Navarro, Jesús A.; Saurí Peris, Ana; Mingarro Muñoz, Ismael; Pallás Benet, Vicente

    2005-01-01

    The movement protein (MP) of Prunus necrotic ringspot virus (PNRSV) is required for cell-to-cell movement. MP subcellular localization studies using a GFP fusion protein revealed highly punctate structures between neighboring cells, believed to represent plasmodesmata. Deletion of the RNA-binding domain (RBD) of PNRSV MP abolishes the cell-to-cell movement. A mutational analysis on this RBD was performed in order to identify in vivo the features that govern viral transport. Loss of positive c...

  9. Analysis of technical-economic requirements for the construction of a solar power plant on the roof of the business building of the Electrical Engineering Institute 'Nikola Tesla'

    OpenAIRE

    Grbić, Maja; Antić, Radoslav; Ponoćko, Jelena; Mikulović, Jovan; Đurišić, Željko

    2014-01-01

    This paper presents an analysis of the technical-economic requirements for the construction of a solar power plant on the roof of the business building of the Electrical Engineering Institute 'Nikola Tesla' in Belgrade. Calculation of solar irradiation is performed and the conceptual design of the disposition of solar panels on the roof of the building is shown as well as their connections to the inverters. Conditions for connecting the plant to the distribution network are checked and an eco...

  10. Quality requirements for veterinary hematology analyzers in small animals-a survey about veterinary experts' requirements and objective evaluation of analyzer performance based on a meta-analysis of method validation studies: bench top hematology analyzer.

    Science.gov (United States)

    Cook, Andrea M; Moritz, Andreas; Freeman, Kathleen P; Bauer, Natali

    2016-09-01

    Scarce information exists about quality requirements and objective evaluation of performance of large veterinary bench top hematology analyzers. The study was aimed at comparing the observed total error (TEobs ) derived from meta-analysis of published method validation data to the total allowable error (TEa ) for veterinary hematology variables in small animals based on experts' opinions. Ideally, TEobs should be hematology analyzers (ADVIA 2120; Sysmex XT2000iV, and CellDyn 3500) was calculated based on method validation studies published between 2005 and 2013 (n = 4). The percent TEobs = 2 * CV (%) + bias (%). The CV was derived from published studies except for the ADVIA 2120 (internal data), and bias was estimated from the regression equation. A total of 41 veterinary experts (19 diplomates, 8 residents, 10 postgraduate students, 4 anonymous specialists) responded. The proposed range of TEa was wide, but generally ≤ 20%. The TEobs was < TEa for all variables and analyzers except for canine and feline HGB (high bias, low CV) and platelet counts (high bias, high CV). Overall, veterinary bench top analyzers fulfilled experts' requirements except for HGB due to method-related bias, and platelet counts due to known preanalytic/analytic issues. © 2016 American Society for Veterinary Clinical Pathology.

  11. A comparative study and analysis of QA requirements for the establishment of a nuclear R and D QA system

    International Nuclear Information System (INIS)

    Kim, Kwan Hyun

    2000-06-01

    This technical report provides recommendations on how to fulfill the requirements of the code in relation to QA activities for nuclear R and D field. This guide applies to the quality assurance (QA) programmes of the responsible organization, i.e. the organization having overall responsibility for the nuclear power plant, as well as to any other separate QA programmes in each stage of a nuclear R and D project. This guide covers QA work on items, services and processes impacting nuclear safety during siting, design, construction, commissioning, operation and decommissioning of nuclear power plants. The impact on safety may occur during the performance of the QA work, or owing to the application of the results of the QA. This guide may, with appropriate modification, also be usefully applied at nuclear installations other than nuclear R and D field

  12. Long-term energy efficiency analysis requires solid energy statistics: The case of the German basic chemical industry

    International Nuclear Information System (INIS)

    Saygin, D.; Worrell, E.; Tam, C.; Trudeau, N.; Gielen, D.J.; Weiss, M.; Patel, M.K.

    2012-01-01

    Analyzing the chemical industry’s energy use is challenging because of the sector’s complexity and the prevailing uncertainty in energy use and production data. We develop an advanced bottom-up model (PIE-Plus) which encompasses the energy use of the 139 most important chemical processes. We apply this model in a case study to analyze the German basic chemical industry’s energy use and energy efficiency improvements in the period between 1995 and 2008. We compare our results with data from the German Energy Balances and with data published by the International Energy Agency (IEA). We find that our model covers 88% of the basic chemical industry’s total final energy use (including non-energy use) as reported in the German Energy Balances. The observed energy efficiency improvements range between 2.2 and 3.5% per year, i.e., they are on the higher side of the values typically reported in literature. Our results point to uncertainties in the basic chemical industry’s final energy use as reported in the energy statistics and the specific energy consumption values. More efforts are required to improve the quality of the national and international energy statistics to make them useable for reliable monitoring of energy efficiency improvements of the chemical industry. -- Highlights: ► An advanced model was developed to estimate German chemical industry’s energy use. ► For the base year (2000), model covers 88% of the sector’s total final energy use. ► Sector’s energy efficiency improved between 2.2 and 3.5%/yr between 1995 and 2008. ► Improved energy statistics are required for accurate monitoring of improvements.

  13. Quantifying and Addressing the DOE Material Reactivity Requirements with Analysis and Testing of Hydrogen Storage Materials & Systems

    Energy Technology Data Exchange (ETDEWEB)

    Khalil, Y. F. [United Technologies Research Center (UTRC), East Hartford, CT (United States)

    2012-04-30

    The objective of this project is to examine safety aspects of candidate hydrogen storage materials and systems being developed in the DOE Hydrogen Program. As a result of this effort, the general DOE safety target will be given useful meaning by establishing a link between the characteristics of new storage materials and the satisfaction of safety criteria. This will be accomplished through the development and application of formal risk analysis methods, standardized materials testing, chemical reactivity characterization, novel risk mitigation approaches and subscale system demonstration. The project also will collaborate with other DOE and international activities in materials based hydrogen storage safety to provide a larger, highly coordinated effort.

  14. Software requirements

    CERN Document Server

    Wiegers, Karl E

    2003-01-01

    Without formal, verifiable software requirements-and an effective system for managing them-the programs that developers think they've agreed to build often will not be the same products their customers are expecting. In SOFTWARE REQUIREMENTS, Second Edition, requirements engineering authority Karl Wiegers amplifies the best practices presented in his original award-winning text?now a mainstay for anyone participating in the software development process. In this book, you'll discover effective techniques for managing the requirements engineering process all the way through the development cy

  15. How many new cancer patients in Europe will require radiotherapy by 2025? An ESTRO-HERO analysis.

    Science.gov (United States)

    Borras, Josep M; Lievens, Yolande; Barton, Michael; Corral, Julieta; Ferlay, Jacques; Bray, Freddie; Grau, Cai

    2016-04-01

    The objective of this HERO study was to assess the number of new cancer patients that will require at least one course of radiotherapy by 2025. European cancer incidence data by tumor site and country for 2012 and 2025 was extracted from the GLOBOCAN database. The projection of the number of new cases took into account demographic factors (age and size of the population). Population based stages at diagnosis were taken from four European countries. Incidence and stage data were introduced in the Australian Collaboration for Cancer Outcomes Research and Evaluation (CCORE) model. Among the different tumor sites, the highest expected relative increase by 2025 in treatment courses was prostate cancer (24%) while lymphoma (13%), head and neck (12%) and breast cancer (10%) were below the average. Based on the projected cancer distributions in 2025, a 16% expected increase in the number of radiotherapy treatment courses was estimated. This increase varied across European countries from less than 5% to more than 30%. With the already existing disparity in radiotherapy resources in mind, the data provided here should act as a leverage point to raise awareness among European health policy makers of the need for investment in radiotherapy. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  16. ato-Gal4 fly lines for gene function analysis: Eya is required in late progenitors for eye morphogenesis.

    Science.gov (United States)

    Yu, Linlin; Zhou, Qingxiang; Pignoni, Francesca

    2015-06-01

    The Gal4/UAS system is one of the most powerful tools for the study of cellular and developmental processes in Drosophila. Gal4 drivers can be used to induce targeted expression of dominant-negative and dominant-active proteins, histological markers, activity sensors, gene-specific dsRNAs, modulators of cell survival or proliferation, and other reagents. Here, we describe novel atonal-Gal4 lines that contain regions of the regulatory DNA of atonal, the proneural gene for photoreceptors, stretch receptors, auditory organ, and some olfactory sensilla. During neurogenesis, the atonal gene is expressed at a critical juncture, a time of transition from progenitor cell to developing neuron. Thus, these lines are particularly well suited for the study of the transcription factors and signaling molecules orchestrating this critical transition. To demonstrate their usefulness, we focus on two visual organs, the eye and the Bolwig. We demonstrate the induction of predicted eye phenotypes when expressing the dominant-negative EGF receptor or a dsRNA against Notch in the developing eye disc. In another example, we show the deletion of the Bolwig's organ using the proapoptotic factor Hid. Finally, we investigate the function of the eye specification factor Eyes absent or Eya in late retinal progenitors, shortly before they begin morphogenesis. We show that Eya is still required in these late progenitors to promote eye formation, and show failure to induce the target gene atonal and consequent lack of neuron formation. © 2015 Wiley Periodicals, Inc.

  17. An analysis of the macroeconomic conditions required for SME lending: Evidence from Turkey and other emerging market countries

    Directory of Open Access Journals (Sweden)

    Jenkins Hatice

    2017-01-01

    Full Text Available Providing small and medium enterprises (SMEs with access to external finance has been a major concern for many governments and international organizations for three decades. In recent years the experiences of emerging market countries suggest that a paradigm shift is taking place in SME finance. Particularly in fast-growing emerging market countries such as Turkey, banks are increasingly targeting SMEs as a new line of banking business. This research analyzes how macroeconomic factors have contributed to increased commercial bank lending to SMEs in six emerging market countries: Turkey, Argentina, Brazil, Mexico, Chile, and Poland. Based on time series and panel data analysis, we find that a high GDP growth rate and increased competition in the banking sector have contributed to increased banking sector credit to SMEs. The findings also reveal that curbing the high inflation rate and reducing government domestic borrowing have significantly encouraged bank lending to the SME segment.

  18. Development of a traceability analysis method based on case grammar for NPP requirement documents written in Korean language

    International Nuclear Information System (INIS)

    Yoo, Yeong Jae; Seong, Poong Hyun; Kim, Man Cheol

    2004-01-01

    Software inspection is widely believed to be an effective method for software verification and validation (V and V). However, software inspection is labor-intensive and, since it uses little technology, software inspection is viewed upon as unsuitable for a more technology-oriented development environment. Nevertheless, software inspection is gaining in popularity. KAIST Nuclear I and C and Information Engineering Laboratory (NICIEL) has developed software management and inspection support tools, collectively named 'SIS-RT.' SIS-RT is designed to partially automate the software inspection processes. SIS-RT supports the analyses of traceability between a given set of specification documents. To make SIS-RT compatible for documents written in Korean, certain techniques in natural language processing have been studied. Among the techniques considered, case grammar is most suitable for analyses of the Korean language. In this paper, we propose a methodology that uses a case grammar approach to analyze the traceability between documents written in Korean. A discussion regarding some examples of such an analysis will follow

  19. An Analysis of Current Labor Market Developments and Structures in European Union – in Correlation with Labor Market Flexicurity Requirements

    Directory of Open Access Journals (Sweden)

    Alina Ştefania CHENIC (CREŢU

    2012-03-01

    Full Text Available Althougt at first sight the crisis appears as a disturbance of the regular course of economic, social and organizational, this is a necessary step that turns old structures and relations to some superior functional. Under these conditions, hawever, it is absolutely necessary that the situation be properly evaluated by an analysis of developments and labour market structures and be taken right decision for the purposes of proper management of existing and potential recovery so far underused resources: people, values and strategies. The impact of the economic crisis on labour markets displays significant variation from one country to another. Employment rates and unemployment rates will be compared between European countries and for different groups of workers. Some countries have succeeded in keeping employment levels up and unemployment levels down through recourse to employmentpreservation and employment-creation measures combined with an expansion of active labour market policies. Moreover, certain labour market groups or categories have been particularly hard hit by the crisis. These include men, temporary workers, youth and migrant workers. In the EU Member States, crossing the crisis period was marked by changes in the sense orientation flexibleworking time and conservation work, a strategy that ensures rapid and reversible adaptation to the needs ofproduction entities present.

  20. Remote Sensing Analysis Techniques and Sensor Requirements to Support the Mapping of Illegal Domestic Waste Disposal Sites in Queensland, Australia

    Directory of Open Access Journals (Sweden)

    Katharine Glanville

    2015-10-01

    Full Text Available Illegal disposal of waste is a significant management issue for contemporary governments with waste posing an economic, social, and environmental risk. An improved understanding of the distribution of illegal waste disposal sites is critical to enhance the cost-effectiveness and efficiency of waste management efforts. Remotely sensed data has the potential to address this knowledge gap. However, the literature regarding the use of remote sensing to map illegal waste disposal sites is incomplete. This paper aims to analyze existing remote sensing methods and sensors used to monitor and map illegal waste disposal sites. The purpose of this paper is to support the evaluation of existing remote sensing methods for mapping illegal domestic waste sites in Queensland, Australia. Recent advances in technology and the acquisition of very high-resolution remote sensing imagery provide an important opportunity to (1 revisit established analysis techniques for identifying illegal waste disposal sites, (2 examine the applicability of different remote sensors for illegal waste disposal detection, and (3 identify opportunities for future research to increase the accuracy of any illegal waste disposal mapping products.

  1. Local content requirements and the impact on the South African renewable energy sector: A survey-based analysis

    Directory of Open Access Journals (Sweden)

    Christopher Ettmayr

    2017-08-01

    Full Text Available Background: Economies aim to grow over time, which usually implies the need for increased energy availability. Governments can use their procurement of energy to increase benefits in their economies via certain policy tools. One such tool is local content requirements (LCRs, where the purchase of goods prescribes that a certain value has to be sourced locally. The argument for this tool is that spending is localised and manufacturing, as well as job creation, can be stimulated because industry will need to establish in the host economy. However, this practice is distortionary in effect and does not create a fair playing ground for global trade. Furthermore, if the local content definition is weak, or open to manipulation, the goals of such a policy may not be achieved at all. Aim: The objective of this study was to determine how LCRs would ultimately impact on the overall procurement programme. Setting: This study took place as South Africa commenced with large scale development of the renewable energy sector. This was largely achieved via the State run Renewable Energy Independent Power Producer Procurement Programme (REIPPPP. Method: This study utilised opinion-based surveys to look into the LCRs of South Africa’s REIPPPP and measure the impact of this policy on the renewable energy sector in general. The mixed method approach was utilised to analyse qualitative and quantitative data and this was then triangulated with an international peer group to arrive at certain conclusions. The Delphi Technique was then employed to achieve population consensus on the findings. Results and conclusion: It was found that, in order to implement a policy such as local content without any negative welfare effects, the host economy had to show certain pre-existing conditions. Because South Africa does not hold all supportive pre-conditions, the impact and effect of LCRs have not been optimal, and it has not been found to be a sustainable mechanism to

  2. How much water is required for coal power generation: An analysis of gray and blue water footprints.

    Science.gov (United States)

    Ma, Xiaotian; Yang, Donglu; Shen, Xiaoxu; Zhai, Yijie; Zhang, Ruirui; Hong, Jinglan

    2018-04-28

    Although water resource shortage is closely connected with coal-based electricity generation, relevant water footprint analyses remain limited. This study aims to address this limitation by conducting a water footprint analysis of coal-based electricity generation in China for the first time to inform decision-makers about how freshwater consumption and wastewater discharge can be reduced. In China, 1 kWh of electricity supply obtained 1.78 × 10 -3  m 3 of gray water footprint in 2015, and the value is 1.3 times the blue water footprint score of 1.35 × 10 -3  m 3 /kWh. Although water footprint of 1 kWh of electricity supply decreased, the national total gray water footprint increased significantly from 2006 to 2015 with increase in power generating capacity. An opposite trend was observed for blue water footprint. Indirect processes dominated the influence of gray water footprint, whereas direct freshwater consumption contributed 63.6% to blue water footprint. Ameliorating key processes, including transportation, direct freshwater consumption, direct air emissions, and coal washing could thus bring substantial environmental benefits. Moreover, phosphorus, mercury, hexavalent chromium, arsenic, COD, and BOD 5 were key substances of gray water footprint. Results indicated that the combination of railway and water transportation should be prioritized. The targeted transition toward high coal washing rate and pithead power plant development provides a possibility to relieve environmental burdens, but constraints on water resources in coal production sites have to be considered. Copyright © 2018 Elsevier B.V. All rights reserved.

  3. Meta-analysis and functional validation of nutritional requirements of solventogenic Clostridia growing under butanol stress conditions and coutilization of D-glucose and D-xylose.

    Science.gov (United States)

    Heluane, Humberto; Evans, Matthew R; Dagher, Sue F; Bruno-Bárcena, José M

    2011-07-01

    Recent advances in systems biology, omics, and computational studies allow us to carry out data mining for improving biofuel production bioprocesses. Of particular interest are bioprocesses that center on microbial capabilities to biotransform both the hexose and pentose fractions present in crop residues. This called for a systematic exploration of the components of the media to obtain higher-density cultures and more-productive fermentation operations than are currently found. By using a meta-analysis approach of the transcriptional responses to butanol stress, we identified the nutritional requirements of solvent-tolerant strain Clostridium beijerinckii SA-1 (ATCC 35702). The nutritional requirements identified were later validated using the chemostat pulse-and-shift technique. C. beijerinckii SA-1 was cultivated in a two-stage single-feed-stream continuous production system to test the proposed validated medium formulation, and the coutilization of D-glucose and D-xylose was evaluated by taking advantage of the well-known ability of solventogenic clostridia to utilize a large variety of carbon sources such as mono-, oligo-, and polysaccharides containing pentose and hexose sugars. Our results indicated that C. beijerinckii SA-1 was able to coferment hexose/pentose sugar mixtures in the absence of a glucose repression effect. In addition, our analysis suggests that the solvent and acid resistance mechanisms found in this strain are differentially regulated compared to strain NRRL B-527 and are outlined as the basis of the analysis toward optimizing butanol production.

  4. Analysis of the custom design/fabrication/testing requirements for a large-hole drilling machine for use in an underground radioactive waste repository

    International Nuclear Information System (INIS)

    Grams, W.H.; Gnirk, P.F.

    1976-01-01

    This report presents an analysis of the fabrication and field test requirements for a drilling machine that would be applicable to the drilling of large diameter holes for the emplacement of radioactive waste canisters in an underground repository. On the basis of a previous study in 1975 by RE/SPEC Inc. for the Oak Ridge National Laboratory, it was concluded that none of the commercially available machines were ideally suited for the desired drilling application, and that it was doubtful whether a machine with the required capabilities would become available as a standard equipment item. The results of the current study, as presented herein, provide a definitive basis for selecting the desired specifications, estimating the design, fabrication, and testing costs, and analyzing the cost-benefit characteristics of a custom-designed drilling machine for the emplacement hole drilling task

  5. MEGASTAR: The meaning of growth. An assessment of systems, technologies, and requirements. [methodology for display and analysis of energy production and consumption

    Science.gov (United States)

    1974-01-01

    A methodology for the display and analysis of postulated energy futures for the United States is presented. A systems approach methodology including the methodology of technology assessment is used to examine three energy scenarios--the Westinghouse Nuclear Electric Economy, the Ford Technical Fix Base Case and a MEGASTAR generated Alternate to the Ford Technical Fix Base Case. The three scenarios represent different paths of energy consumption from the present to the year 2000. Associated with these paths are various mixes of fuels, conversion, distribution, conservation and end-use technologies. MEGASTAR presents the estimated times and unit requirements to supply the fuels, conversion and distribution systems for the postulated end uses for the three scenarios and then estimates the aggregate manpower, materials, and capital requirements needed to develop the energy system described by the particular scenario.

  6. Analysis of capsid portal protein and terminase functional domains: interaction sites required for DNA packaging in bacteriophage T4.

    Science.gov (United States)

    Lin, H; Rao, V B; Black, L W

    1999-06-04

    Bacteriophage DNA packaging results from an ATP-driven translocation of concatemeric DNA into the prohead by the phage terminase complexed with the portal vertex dodecamer of the prohead. Functional domains of the bacteriophage T4 terminase and portal gene 20 product (gp20) were determined by mutant analysis and sequence localization within the structural genes. Interaction regions of the portal vertex and large terminase subunit (gp17) were determined by genetic (terminase-portal intergenic suppressor mutations), biochemical (column retention of gp17 and inhibition of in vitro DNA packaging by gp20 peptides), and immunological (co-immunoprecipitation of polymerized gp20 peptide and gp17) studies. The specificity of the interaction was tested by means of a phage T4 HOC (highly antigenicoutercapsid protein) display system in which wild-type, cs20, and scrambled portal peptide sequences were displayed on the HOC protein of phage T4. Binding affinities of these recombinant phages as determined by the retention of these phages by a His-tag immobilized gp17 column, and by co-immunoprecipitation with purified terminase supported the specific nature of the portal protein and terminase interaction sites. In further support of specificity, a gp20 peptide corresponding to a portion of the identified site inhibited packaging whereas the scrambled sequence peptide did not block DNA packaging in vitro. The portal interaction site is localized to 28 residues in the central portion of the linear sequence of gp20 (524 residues). As judged by two pairs of intergenic portal-terminase suppressor mutations, two separate regions of the terminase large subunit gp17 (central and COOH-terminal) interact through hydrophobic contacts at the portal site. Although the terminase apparently interacts with this gp20 portal peptide, polyclonal antibody against the portal peptide appears unable to access it in the native structure, suggesting intimate association of gp20 and gp17 possibly

  7. The number of patients and events required to limit the risk of overestimation of intervention effects in meta-analysis--a simulation study

    DEFF Research Database (Denmark)

    Thorlund, Kristian; Imberger, Georgina; Walsh, Michael

    2011-01-01

    Meta-analyses including a limited number of patients and events are prone to yield overestimated intervention effect estimates. While many assume bias is the cause of overestimation, theoretical considerations suggest that random error may be an equal or more frequent cause. The independent impact...... of random error on meta-analyzed intervention effects has not previously been explored. It has been suggested that surpassing the optimal information size (i.e., the required meta-analysis sample size) provides sufficient protection against overestimation due to random error, but this claim has not yet been...

  8. Risk factor screening to identify women requiring oral glucose tolerance testing to diagnose gestational diabetes: A systematic review and meta-analysis and analysis of two pregnancy cohorts.

    Directory of Open Access Journals (Sweden)

    Diane Farrar

    Full Text Available Easily identifiable risk factors including: obesity and ethnicity at high risk of diabetes are commonly used to indicate which women should be offered the oral glucose tolerance test (OGTT to diagnose gestational diabetes (GDM. Evidence regarding these risk factors is limited however. We conducted a systematic review (SR and meta-analysis and individual participant data (IPD analysis to evaluate the performance of risk factors in identifying women with GDM.We searched MEDLINE, Medline in Process, Embase, Maternity and Infant Care and the Cochrane Central Register of Controlled Trials (CENTRAL up to August 2016 and conducted additional reference checking. We included observational, cohort, case-control and cross-sectional studies reporting the performance characteristics of risk factors used to identify women at high risk of GDM. We had access to IPD from the Born in Bradford and Atlantic Diabetes in Pregnancy cohorts, all pregnant women in the two cohorts with data on risk factors and OGTT results were included.Twenty nine published studies with 211,698 women for the SR and a further 14,103 women from two birth cohorts (Born in Bradford and the Atlantic Diabetes in Pregnancy study for the IPD analysis were included. Six studies assessed the screening performance of guidelines; six examined combinations of risk factors; eight evaluated the number of risk factors and nine examined prediction models or scores. Meta-analysis using data from published studies suggests that irrespective of the method used, risk factors do not identify women with GDM well. Using IPD and combining risk factors to produce the highest sensitivities, results in low specificities (and so higher false positives. Strategies that use the risk factors of age (>25 or >30 and BMI (>25 or 30 perform as well as other strategies with additional risk factors included.Risk factor screening methods are poor predictors of which pregnant women will be diagnosed with GDM. A simple

  9. Investigation of continuous effect modifiers in a meta-analysis on higher versus lower PEEP in patients requiring mechanical ventilation--protocol of the ICEM study.

    Science.gov (United States)

    Kasenda, Benjamin; Sauerbrei, Willi; Royston, Patrick; Briel, Matthias

    2014-05-20

    Categorizing an inherently continuous predictor in prognostic analyses raises several critical methodological issues: dependence of the statistical significance on the number and position of the chosen cut-point(s), loss of statistical power, and faulty interpretation of the results if a non-linear association is incorrectly assumed to be linear. This also applies to a therapeutic context where investigators of randomized clinical trials (RCTs) are interested in interactions between treatment assignment and one or more continuous predictors. Our goal is to apply the multivariable fractional polynomial interaction (MFPI) approach to investigate interactions between continuous patient baseline variables and the allocated treatment in an individual patient data meta-analysis of three RCTs (N = 2,299) from the intensive care field. For each study, MFPI will provide a continuous treatment effect function. Functions from each of the three studies will be averaged by a novel meta-analysis approach for functions. We will plot treatment effect functions separately for each study and also the averaged function. The averaged function with a related confidence interval will provide a suitable basis to assess whether a continuous patient characteristic modifies the treatment comparison and may be relevant for clinical decision-making. The compared interventions will be a higher or lower positive end-expiratory pressure (PEEP) ventilation strategy in patients requiring mechanical ventilation. The continuous baseline variables body mass index, PaO2/FiO2, respiratory compliance, and oxygenation index will be the investigated potential effect modifiers. Clinical outcomes for this analysis will be in-hospital mortality, time to death, time to unassisted breathing, and pneumothorax. This project will be the first meta-analysis to combine continuous treatment effect functions derived by the MFPI procedure separately in each of several RCTs. Such an approach requires individual

  10. The Attitudes, Needs, and Requirements at End of Life in the Republic of Georgia (Comparative Analysis of Groups of Patients With Cancer and Elders).

    Science.gov (United States)

    Chikhladze, Nana; Tebidze, Nino; Chabukiani, Tamar; Chabukiani, Nana; Chkhartishvili, Nikoloz; Jincharadze, Memed; Kordzaia, Dimitri

    2018-01-01

    In developing a model of palliative care, the attitudes, needs, and requirements of its beneficiaries recognizing the limited remaining life expectancy need to be met. We aimed to map and compare these issues at the end of life in the groups of patients with advanced cancer and elderly individuals. The prospective study based on the analysis of semistructured interviews was conducted. Fifty individuals aged older than 85 and 50 incurable patients with advanced cancer were studied. Transcripts of interviews were analyzed qualitatively (the interviews were divided into logically completed themes, and the compliance of each with one of the levels of Abraham Maslow pyramid was determined) and quantitatively (data comparisons of 2 groups were tested in bivariate analysis using Pearson χ 2 or Fisher exact test. Two-sided significance tests were used; P value of Maslow pyramid. Their comparison showed small differences in the narratives of the patients with advanced cancer and elderly individuals aged 85 and older-concerning the past, present, and future terms of lives. In studied themes explicitly prevail the stories that are consistent with satisfaction of the upper levels of the hierarchy of needs and demands of Maslow: social relation (belonging), love, esteem, and transcendence. The attitudes, needs, and requirements at the end of life of the people are basically similar, regardless of what determined the sense of limitation of the remaining life-incurable disease or advanced age.

  11. Closure requirements

    International Nuclear Information System (INIS)

    Hutchinson, I.P.G.; Ellison, R.D.

    1992-01-01

    Closure of a waste management unit can be either permanent or temporary. Permanent closure may be due to: economic factors which make it uneconomical to mine the remaining minerals; depletion of mineral resources; physical site constraints that preclude further mining and beneficiation; environmental, regulatory or other requirements that make it uneconomical to continue to develop the resources. Temporary closure can occur for a period of several months to several years, and may be caused by factors such as: periods of high rainfall or snowfall which prevent mining and waste disposal; economic circumstances which temporarily make it uneconomical to mine the target mineral; labor problems requiring a cessation of operations for a period of time; construction activities that are required to upgrade project components such as the process facilities and waste management units; and mine or process plant failures that require extensive repairs. Permanent closure of a mine waste management unit involves the provision of durable surface containment features to protect the waters of the State in the long-term. Temporary closure may involve activities that range from ongoing maintenance of the existing facilities to the installation of several permanent closure features in order to reduce ongoing maintenance. This paper deals with the permanent closure features

  12. ¹³C metabolic flux analysis identifies an unusual route for pyruvate dissimilation in mycobacteria which requires isocitrate lyase and carbon dioxide fixation.

    Directory of Open Access Journals (Sweden)

    Dany J V Beste

    2011-07-01

    Full Text Available Mycobacterium tuberculosis requires the enzyme isocitrate lyase (ICL for growth and virulence in vivo. The demonstration that M. tuberculosis also requires ICL for survival during nutrient starvation and has a role during steady state growth in a glycerol limited chemostat indicates a function for this enzyme which extends beyond fat metabolism. As isocitrate lyase is a potential drug target elucidating the role of this enzyme is of importance; however, the role of isocitrate lyase has never been investigated at the level of in vivo fluxes. Here we show that deletion of one of the two icl genes impairs the replication of Mycobacterium bovis BCG at slow growth rate in a carbon limited chemostat. In order to further understand the role of isocitrate lyase in the central metabolism of mycobacteria the effect of growth rate on the in vivo fluxes was studied for the first time using ¹³C-metabolic flux analysis (MFA. Tracer experiments were performed with steady state chemostat cultures of BCG or M. tuberculosis supplied with ¹³C labeled glycerol or sodium bicarbonate. Through measurements of the ¹³C isotopomer labeling patterns in protein-derived amino acids and enzymatic activity assays we have identified the activity of a novel pathway for pyruvate dissimilation. We named this the GAS pathway because it utilizes the Glyoxylate shunt and Anapleurotic reactions for oxidation of pyruvate, and Succinyl CoA synthetase for the generation of succinyl CoA combined with a very low flux through the succinate--oxaloacetate segment of the tricarboxylic acid cycle. We confirm that M. tuberculosis can fix carbon from CO₂ into biomass. As the human host is abundant in CO₂ this finding requires further investigation in vivo as CO₂ fixation may provide a point of vulnerability that could be targeted with novel drugs. This study also provides a platform for further studies into the metabolism of M. tuberculosis using ¹³C-MFA.

  13. Molecular analysis of mxbD and mxbM, a putative sensor-regulator pair required for oxidation of methanol in Methylobacterium extorquens AM1.

    Science.gov (United States)

    Springer, A L; Morris, C J; Lidstrom, M E

    1997-05-01

    Five genes are thought to be required for transcription of methanol oxidation genes in Methylobacterium strains. These putative regulatory genes include mxcQE, which encode a putative sensor-regulator pair, and mxbDM and mxaB, whose functions are less well-understood. In this study, mxbDM in Methylobacterium extorquens AM1 were shown to be required for expression of a xylE transcriptional fusion to the structural gene for the large subunit of methanol dehydrogenase (mxaF), confirming the role of these genes in transcriptional regulation of mxaF. The nucleotide sequence suggests that mxbD encodes a histidine protein kinase with two transmembrane domains and that mxbM encodes a DNA-binding response regulator. A xylE transcriptional fusion to the putative mxbD promoter showed low-level expression in wild-type cells grown on one-carbon (C1) compounds and no detectable expression in cells grown on succinate. Deletion analysis of this promoter construct showed that the region 229-129 bp upstream of the start of mxbD is required for expression. The expression of the mxbD-xylE fusion was examined in each of the five known regulatory mutant classes. xylE expression was reduced to non-detectable levels in MxcQ and MxcE mutants, but was not affected in the other regulatory mutants or in non-regulatory mutants defective in methanol oxidation. These results suggest a regulatory hierarchy in which the sensor-regulator pair MxcQE control expression of the sensor-regulator pair MxbDM, and MxbDM in turn control expression of a number of genes involved in methanol oxidation.

  14. Risk of wound infection and safety profile of amoxicillin in healthy patients which required third molar surgery: a systematic review and meta-analysis.

    Science.gov (United States)

    Isiordia-Espinoza, M A; Aragon-Martinez, O H; Martínez-Morales, J F; Zapata-Morales, J R

    2015-11-01

    The aim of this systematic review and meta-analysis was to assess the risk of surgical wound infection and the adverse effects of amoxicillin in healthy patients who required excision of third molars. We identified eligible reports from searches of PubMed, Medline®, the Cochrane Library, Imbiomed, LILACS, and Google Scholar. Studies that met our minimum requirements were evaluated using inclusion and exclusion criteria and the Oxford Quality Scale. Those with a score of 3 or more on this Scale were included and their data were extracted and analysed. For evaluation of the risk of infection the absolute risk reduction, number needed to treat, and 95% CI were calculated. For evaluation of the risk of an adverse effect the absolute risk increase, number needed to harm, and 95% CI were calculated using the Risk Reduction Calculator. Each meta-analysis was made with the help of the Mantel-Haenszel random effects model, and estimates of risk (OR) and 95% CI were calculated using the Review Manager 5.3, from the Cochrane Library. A significant risk was assumed when the lower limit of the 95% CI was greater than 1. Probabilities of less than 0.05 were accepted as significant. The results showed that there was no reduction in the risk of infection when amoxicillin was given before or after operation compared with an untreated group or placebo. In conclusion, this study suggests that amoxicillin given prophylactically or postoperatively does not reduce the risk of infection in healthy patients having their third molars extracted. Copyright © 2015 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  15. An Analysis of the Acquisition Process for Simplified Acquisition of Base Engineering Requirements (SABER) Contracts and Its Potential Impact on Contractor Performance

    National Research Council Canada - National Science Library

    Heaps, Brian

    2001-01-01

    The Simplified Acquisition of Base Engineering Requirements (SABER) contract's main purpose is to expedite contract award of civil engineer requirements through the issuance of individual delivery orders...

  16. Assessing Requirements Quality through Requirements Coverage

    Science.gov (United States)

    Rajan, Ajitha; Heimdahl, Mats; Woodham, Kurt

    2008-01-01

    In model-based development, the development effort is centered around a formal description of the proposed software system the model. This model is derived from some high-level requirements describing the expected behavior of the software. For validation and verification purposes, this model can then be subjected to various types of analysis, for example, completeness and consistency analysis [6], model checking [3], theorem proving [1], and test-case generation [4, 7]. This development paradigm is making rapid inroads in certain industries, e.g., automotive, avionics, space applications, and medical technology. This shift towards model-based development naturally leads to changes in the verification and validation (V&V) process. The model validation problem determining that the model accurately captures the customer's high-level requirements has received little attention and the sufficiency of the validation activities has been largely determined through ad-hoc methods. Since the model serves as the central artifact, its correctness with respect to the users needs is absolutely crucial. In our investigation, we attempt to answer the following two questions with respect to validation (1) Are the requirements sufficiently defined for the system? and (2) How well does the model implement the behaviors specified by the requirements? The second question can be addressed using formal verification. Nevertheless, the size and complexity of many industrial systems make formal verification infeasible even if we have a formal model and formalized requirements. Thus, presently, there is no objective way of answering these two questions. To this end, we propose an approach based on testing that, when given a set of formal requirements, explores the relationship between requirements-based structural test-adequacy coverage and model-based structural test-adequacy coverage. The proposed technique uses requirements coverage metrics defined in [9] on formal high-level software

  17. Engineering Requirements for crowds

    Directory of Open Access Journals (Sweden)

    Rogeiro Silva

    2015-12-01

    Full Text Available In the software project the interested parts are highly distributed and form numerous and heterogeneous groups, online or face, constituting what could be called crowds. The development of social applications and cloud computing and mobile has generated a marked increase in environments based requirements in crowds. Technical Requirements Engineering (RE traditional face these scalability issues, and require the co-presence of interested and engineers in joint meetings that can not be made in common physical environments. While different approaches have been introduced to partially automate RE in these contexts, still is required a multi-method approach to semi-automate all activities related to work with crowds. In this paper is propose an approach that integrates existing elicitation techniques and requirements analysis and is complemented by introducing new concepts. The information is collected through direct interaction and social collaboration, and through data mining techniques.

  18. Creativity in Requirement Identification

    DEFF Research Database (Denmark)

    Sørensen, Lene Tolstrup; Olesen, Henning

    Traditional requirements engineering focuses mainly on analysis and elicitation. However, current trends in new system, device and software are towards involving all stakeholders in the early stages of the engineering process to define the user requirements. Creativity is here seen as a major...... keystone in this process in order to open up stakeholder's mind to new technologies, which do not yet exist. This paper dis-cusses the application of creativity in the requirements process and illustrate through cases from the MAGNET and MAGNET Beyond projects....

  19. Analysis of compatibility of current Czech initial documentation in the area of technical assurance of nuclear safety with the requirements of the EUR document

    International Nuclear Information System (INIS)

    Zdebor, J.; Zdebor, R.; Kratochvil, L.

    2001-11-01

    The publication is structured as follows: Description of existing documentation. General requirements, goals, principles and design principles: Documents being compared; Method of comparison; Results and partial evaluation of comparison of requirements between EUR and Czech regulations (basic goals and safety philosophy; quantitative safety objectives; basic design requirements; extended design requirements; external and internal threats; technical requirements; site conditions); Summary of the comparison of safety requirements. Comparison of requirements for the systems: Requirements for the nuclear reactor unit systems; Barrier systems (fuel system; reactor cooling system; containment system); Remaining systems (control systems; protection systems; coolant makeup and purification system; residual heat removal system; emergency cooling system; power systems); Common technical requirements for systems (technical requirements for systems; internal and external events). (P.A.)

  20. Adjuvant use of antibiotics with corticosteroids in inflammatory bowel disease exacerbations requiring hospitalisation: a retrospective cohort study and meta-analysis.

    Science.gov (United States)

    Gupta, V; Rodrigues, R; Nguyen, D; Sauk, J; Khalili, H; Yajnik, V; Ananthakrishnan, A N

    2016-01-01

    Patients hospitalised with an exacerbation of inflammatory bowel disease (IBD) often receive antibiotics in addition to intravenous steroids. However, their efficacy in this setting is unclear. To ascertain if the addition of antibiotics to intravenous steroids modifies short and long-term clinical outcomes. Our study included IBD patients hospitalised between 2009 and 2014 who received intravenous (IV) steroids with or without adjuvant antibiotics. Outcomes of interest included length of stay (LOS), need for medical and surgical rescue therapy during the hospitalisation, and at 90 and 365 days. A meta-analysis of previously published randomised trials was additionally performed. A total of 354 patients were included [145 ulcerative colitis (UC); 209 Crohn's disease (CD)]. In CD, combination of IV steroids and antibiotics did not change need for in-hospital medical rescue therapy, surgery or hospitalisations at 1 year but was associated with greater LOS (6.1 vs. 4.6 days, P = 0.02). In UC, patients receiving antibiotics were less likely to require in-hospital medical rescue therapy [odds ratio (OR): 0.42, 95% confidence interval (CI): 0.19-0.93] but experienced no statistically significant differences in LOS, in-hospital surgery, re-hospitalisations or surgery by 1 year. A meta-analysis of three relevant randomised trials demonstrated no difference in clinical improvement with antibiotics over placebo (OR: 1.08, 95% CI: 0.50-2.32). The addition of antibiotics to intravenous steroids for treatment of IBD exacerbations was associated with a reduced need for in-hospital medical rescue therapy in ulcerative colitis without significant long-term benefit, and did not affect short- or long-term outcomes in Crohn's disease. © 2015 John Wiley & Sons Ltd.

  1. Detecting scale violations in absence of mismatch requires music-syntactic analysis: a further look at the early right anterior negativity (ERAN).

    Science.gov (United States)

    Kalda, Tiina; Minati, Ludovico

    2012-07-01

    The purpose of this study was to determine whether infrequent scale violations in a sequence of in-key notes are detected when the deviants are matched for frequency of occurrence and preceding intervals with the control notes. We further investigated whether the detectability of scale violations is modulated by the presence of melodic context and by the level of musical training. Event related potentials were recorded from 14 musicians and 13 non-musicians. In non-musicians, the out-of-key notes elicited an early right anterior negativity (ERAN), which appeared prominently over right frontal sites only when presented within structured sequences; no effects were found when the out-of-key notes were presented within scrambled sequences. In musicians, the out-of-key notes elicited a similar bilateral ERAN in structured and scrambled sequences. Our findings suggest that scale information is processed at the level of music-syntactic analysis, and that the detection of deviants does not require activation of auditory sensory memory by mismatch effects. Scales are perceived as a broader context, not just as online interval relations. Additional melodic context information appears necessary to support the representation of scale deviants in non-musicians, but not in musically-trained individuals, likely as a consequence of stronger pre-existing representations.

  2. Mutational analysis of the RNA-binding domain of the Prunus necrotic ringspot virus (PNRSV) movement protein reveals its requirement for cell-to-cell movement.

    Science.gov (United States)

    Carmen Herranz, Ma; Sanchez-Navarro, Jesús-Angel; Saurí, Ana; Mingarro, Ismael; Pallás, Vicente

    2005-08-15

    The movement protein (MP) of Prunus necrotic ringspot virus (PNRSV) is required for cell-to-cell movement. MP subcellular localization studies using a GFP fusion protein revealed highly punctate structures between neighboring cells, believed to represent plasmodesmata. Deletion of the RNA-binding domain (RBD) of PNRSV MP abolishes the cell-to-cell movement. A mutational analysis on this RBD was performed in order to identify in vivo the features that govern viral transport. Loss of positive charges prevented the cell-to-cell movement even though all mutants showed a similar accumulation level in protoplasts to those observed with the wild-type (wt) MP. Synthetic peptides representing the mutants and wild-type RBDs were used to study RNA-binding affinities by EMSA assays being approximately 20-fold lower in the mutants. Circular dichroism analyses revealed that the secondary structure of the peptides was not significantly affected by mutations. The involvement of the affinity changes between the viral RNA and the MP in the viral cell-to-cell movement is discussed.

  3. Mutational analysis of the RNA-binding domain of the Prunus necrotic ringspot virus (PNRSV) movement protein reveals its requirement for cell-to-cell movement

    International Nuclear Information System (INIS)

    Carmen Herranz, Ma; Sanchez-Navarro, Jesus-Angel; Sauri, Ana; Mingarro, Ismael; Pallas, Vicente

    2005-01-01

    The movement protein (MP) of Prunus necrotic ringspot virus (PNRSV) is required for cell-to-cell movement. MP subcellular localization studies using a GFP fusion protein revealed highly punctate structures between neighboring cells, believed to represent plasmodesmata. Deletion of the RNA-binding domain (RBD) of PNRSV MP abolishes the cell-to-cell movement. A mutational analysis on this RBD was performed in order to identify in vivo the features that govern viral transport. Loss of positive charges prevented the cell-to-cell movement even though all mutants showed a similar accumulation level in protoplasts to those observed with the wild-type (wt) MP. Synthetic peptides representing the mutants and wild-type RBDs were used to study RNA-binding affinities by EMSA assays being approximately 20-fold lower in the mutants. Circular dichroism analyses revealed that the secondary structure of the peptides was not significantly affected by mutations. The involvement of the affinity changes between the viral RNA and the MP in the viral cell-to-cell movement is discussed

  4. [Efficacy of high versus low plasma: red blood cell ratio resuscitation in patients with severe trauma requiring massive blood transfusion: a meta-analysis].

    Science.gov (United States)

    Yu, Fang; Zhong, Tao; Wu, Gang

    2017-01-20

    To evaluate the efficacy of high (≥1:2) and low (ratio resuscitation in patients with severe trauma requiring massive blood transfusion. The databases including the Cochrane Library, Pubmed, Web of Science, and EMBASE were systemically searched for relevant studies published between January, 2009 and April, 2016. The selection of studies, assessment of methodological quality and data extraction were performed by two researchers independently according to the inclusion and exclusion criteria. The main endpoint was 24-h mortality, 30-day mortality and 24-h survival rate. Five observational studies reporting outcomes of 1024 patients were included in this meta-analysis. Four studies documented civilian cases and one study had a military setting. No significant differences were found in the Injury Severity Score (ISS) between patient groups receiving high and low plasma: RBC ratio resuscitation. Compared with the low-ratio group, the patients with high-ratio resuscitation showed a significant reduction in the 24-h mortality rate (OR=0.35, 95%CI [0.25, 0.48], Pratio resuscitation within the initial 24 h following the trauma (HR=2.34, 95%CI [1.46, 3.73], P=0.00001). Raising the plasma: RBC ratio to 0.5 or higher may decrease the mortality rate of the patients with severe trauma who need massive blood transfusion.

  5. Machine Learning Analysis Identifies Drosophila Grunge/Atrophin as an Important Learning and Memory Gene Required for Memory Retention and Social Learning.

    Science.gov (United States)

    Kacsoh, Balint Z; Greene, Casey S; Bosco, Giovanni

    2017-11-06

    High-throughput experiments are becoming increasingly common, and scientists must balance hypothesis-driven experiments with genome-wide data acquisition. We sought to predict novel genes involved in Drosophila learning and long-term memory from existing public high-throughput data. We performed an analysis using PILGRM, which analyzes public gene expression compendia using machine learning. We evaluated the top prediction alongside genes involved in learning and memory in IMP, an interface for functional relationship networks. We identified Grunge/Atrophin ( Gug/Atro ), a transcriptional repressor, histone deacetylase, as our top candidate. We find, through multiple, distinct assays, that Gug has an active role as a modulator of memory retention in the fly and its function is required in the adult mushroom body. Depletion of Gug specifically in neurons of the adult mushroom body, after cell division and neuronal development is complete, suggests that Gug function is important for memory retention through regulation of neuronal activity, and not by altering neurodevelopment. Our study provides a previously uncharacterized role for Gug as a possible regulator of neuronal plasticity at the interface of memory retention and memory extinction. Copyright © 2017 Kacsoh et al.

  6. Analysis of cis and trans Requirements for DNA Replication at the Right-End Hairpin of the Human Bocavirus 1 Genome.

    Science.gov (United States)

    Shen, Weiran; Deng, Xuefeng; Zou, Wei; Engelhardt, John F; Yan, Ziying; Qiu, Jianming

    2016-09-01

    Parvoviruses are single-stranded DNA viruses that use the palindromic structures at the ends of the viral genome for their replication. The mechanism of parvovirus replication has been studied mostly in the dependoparvovirus adeno-associated virus 2 (AAV2) and the protoparvovirus minute virus of mice (MVM). Here, we used human bocavirus 1 (HBoV1) to understand the replication mechanism of bocaparvovirus. HBoV1 is pathogenic to humans, causing acute respiratory tract infections, especially in young children under 2 years old. By using the duplex replicative form of the HBoV1 genome in human embryonic kidney 293 (HEK293) cells, we identified the HBoV1 minimal replication origin at the right-end hairpin (OriR). Mutagenesis analyses confirmed the putative NS1 binding and nicking sites within the OriR. Of note, unlike the large nonstructural protein (Rep78/68 or NS1) of other parvoviruses, HBoV1 NS1 did not specifically bind OriR in vitro, indicating that other viral and cellular components or the oligomerization of NS1 is required for NS1 binding to the OriR. In vivo studies demonstrated that residues responsible for NS1 binding and nicking are within the origin-binding domain. Further analysis identified that the small nonstructural protein NP1 is required for HBoV1 DNA replication at OriR. NP1 and other viral nonstructural proteins (NS1 to NS4) colocalized within the viral DNA replication centers in both OriR-transfected cells and virus-infected cells, highlighting a direct involvement of NP1 in viral DNA replication at OriR. Overall, our study revealed the characteristics of HBoV1 DNA replication at OriR, suggesting novel characteristics of autonomous parvovirus DNA replication. Human bocavirus 1 (HBoV1) causes acute respiratory tract infections in young children. The duplex HBoV1 genome replicates in HEK293 cells and produces progeny virions that are infectious in well-differentiated airway epithelial cells. A recombinant AAV2 vector pseudotyped with an HBoV1

  7. Battery Dimensioning and Life Cycle Costs Analysis for a Heavy-Duty Truck Considering the Requirements of Long-Haul Transportation

    OpenAIRE

    Mareev, Ivan; Becker, Jan Nicolas; Sauer, Dirk Uwe

    2018-01-01

    The use of heavy-duty battery electric trucks for long-haul transportation is challenging because of the required high energy amounts and thus the high capacity of traction batteries. Furthermore a high capacity battery implies high initial costs for the electric vehicle. This study investigates the required battery capacity for battery electric trucks considering the requirements of long-haul transportation in Germany and compares the life cycle costs of battery electric trucks and conventio...

  8. Notification of suspected and unexpected serious adverse reactions according to the Clinical Trials Directive - A descriptive analysis of the legislation and the requirements in a European context

    DEFF Research Database (Denmark)

    Larsen, Ellen Moseholm; Grarup, Jesper; Gey, Daniela Christine

    2010-01-01

    The European Clinical Trials Directive (CTD) came into force on May 1st 2004. The CTD provides the legal basis for monitoring the safety of clinical trials and covers the requirements for notification of SUSAR. Implementation of the CTD into national legislation in each Member State has resulted...... in various interpretations of CTD requirements. The objective of this paper is to investigate how the European Member States administer the safety reporting requirements of the CTD and to clarify the requirements for SUSAR notification in the different Member States. Data was collected through publicly...

  9. Use of Oritavancin in Moderate-to-Severe ABSSSI Patients Requiring IV Antibiotics: A U.S. Payer Budget Impact Analysis.

    Science.gov (United States)

    Jensen, Ivar S; Wu, Elizabeth; Fan, Weihong; Lodise, Thomas P; Nicolau, David P; Dufour, Scott; Cyr, Philip L; Sulham, Katherine A

    2016-06-01

    It is estimated that acute bacterial skin and skin structure infections (ABSSSI) account for nearly 10% of hospital admissions and 3.4-3.8 million emergency department visits per year in the United States. Analyses of hospital discharge records indicate 74% of ABSSSI admissions involve empiric treatment with methicillin-resistant Staphylococcus aureus (MRSA) active antibiotics. Analysis has shown that payer costs could be reduced if moderate-to-severe ABSSSI patients were treated to a greater extent in the observational unit followed by discharge to outpatient parenteral antibiotic therapy (OPAT). Oritavancin is a lipoglycopeptide antibiotic with bactericidal activity against gram-positive bacteria, including MRSA. To estimate the impact on a U.S. payer's budget of using single-dose oritavancin in ABSSSI patients with suspected MRSA involvement who are indicated for intravenous antibiotics. A decision analytic model based on current clinical practice was developed to estimate the economic value of decreased hospital resource consumption by using single-dose oritavancin over a 1-year time horizon. Use of antibiotics was informed by an analysis of the Premier Research Database. Demographic and clinical data were derived from a targeted literature review. Emergency department, observation, laboratory, and administration costs used were Medicare National Limitation amounts. Drug costs were 2014 wholesale acquisition costs. For a hypothetical U.S. payer with 1,000,000 members, it is expected that approximately 14,285 members per year will be diagnosed with ABSSSI severe enough to indicate intravenous antibiotics with MRSA activity. Based on this simulation, use of single-dose oritavancin in 26% of these patients was estimated to reduce the number of inpatient admissions, reduce length of stay for patients requiring admission, and reduce the number of days a patient needs to receive daily infusions in the OPAT clinic. The total patient days decreased from 171,125 to 133

  10. When does State Interference with Property (now Amount to Expropriation? An Analysis of the Agri SA Court's State Acquisition Requirement (Part I

    Directory of Open Access Journals (Sweden)

    Ernst Jacobus Marais

    2015-04-01

    Full Text Available Section 25 of the Constitution provides two ways in which the state may interfere with property rights, namely deprivation (section 25(1 and expropriation (section 25(2. As only the latter requires compensation, there is an incentive for property holders to label any infringement upon their property as expropriation in the hope of being compensated for their losses. It is therefore essential to have a principled distinction between these two forms of state interference, especially given the danger that uncertainty in this regard can hold for legitimate land reform initiatives, which often entail severe limitations on property. In the Agri SA case the Constitutional Court recently revisited this distinction and held that the distinguishing feature of expropriation is that it entails state acquisition of property. Two aspects of this judgment are worthy of consideration. Firstly, the centrality of acquisition makes it necessary to clarify its meaning and role in our law. Secondly, the Court's effect-centred test to establish whether acquisition took place appears incapable of coherently categorising property infringements that fall within the grey area between deprivation and expropriation. To address these two questions this article is divided into two parts. Part I investigates the meaning and role of state acquisition in South African law. Pre-constitutional expropriation law reveals that expropriation is an original method of acquisition of ownership and that the objects of expropriation include ownership, limited real rights, and certain personal rights, which correspond to the meaning attributed to this requirement in Agri SA. However, post-constitutional judgments diverge from pre-constitutional law regarding the role of state acquisition, where it was merely regarded as a general hallmark of expropriation. After Agri SA state acquisition is (now the "key feature" that distinguishes expropriation from deprivation. A brief analysis of

  11. Analysis of connection element classes and locations and of some structural requirements for the mounting of different superstructure types on transport vehicles

    Directory of Open Access Journals (Sweden)

    Zoran Đ. Majkić

    2011-04-01

    Full Text Available The paper presents the basic requirements for transport vehicles. A special request regarding the adaptation of transport vehicles for the transport of various types of cargo was taken into consideration. Superstructures and the situation arising after mounting superstructures on wheeled transport vehicles were analyzed and the following was described: console coupling, stirrups, simplex elastic coupling, two-way elastic and rigid connection elements. Vehicle torsional elasticity is provided by a proper choice of the type of connection between the superstructure and the vehicle chassis. Applying the instructions of vehicle manufacturers for using appropriate connections between the truck superstructure and the vehicle chassis provides positive torsional elasticity of the vehicle. The paper gives the general recommendations of the Volvo, Mercedes and Renault transport vehicle producers for the use of particular connection types of locations as well as structural requirements for the mounting of concrete mixers, tippers and truck tanks on their vehicles. Introduction Achieving a high level of transport effectiveness depends on a number of factors. One of the most important ones is the possibility to increase the payload share in the gross vehicle weight. This share depends on the net vehicle weight, a method of coupling the truck superstructure with the chassis frame as well as on the truck superstructure construction. Realization of this requirement is of significant importance, particularly for large business systems since it results in the reduction of number of necessary vehicles, more economic fleet maintenance and the fleet capacity increase. It is also relatively easy to adapt the vehicle for the transportation of other loads, depending on user's current needs. The adaptation is correctly performed if manufacturer's recommendations are followed during the mounting of the superstructure on the chassis. This paper gives the analysis of the

  12. Range Flight Safety Requirements

    Science.gov (United States)

    Loftin, Charles E.; Hudson, Sandra M.

    2018-01-01

    The purpose of this NASA Technical Standard is to provide the technical requirements for the NPR 8715.5, Range Flight Safety Program, in regards to protection of the public, the NASA workforce, and property as it pertains to risk analysis, Flight Safety Systems (FSS), and range flight operations. This standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements to the extent specified or referenced in their contracts, grants, or agreements, when these organizations conduct or participate in missions that involve range flight operations as defined by NPR 8715.5.1.2.2 In this standard, all mandatory actions (i.e., requirements) are denoted by statements containing the term “shall.”1.3 TailoringTailoring of this standard for application to a specific program or project shall be formally documented as part of program or project requirements and approved by the responsible Technical Authority in accordance with NPR 8715.3, NASA General Safety Program Requirements.

  13. Analysis 6. Component requirements, competition and export. A survey of innovation related to building components; Analyse 6. Komponentkrav, konkurrence og eksport. En kortlaegning af innovation i byggekomponenter

    Energy Technology Data Exchange (ETDEWEB)

    Svendsen, Svend

    2011-02-15

    The report collates several sub-analyses about feasible developments in relation to improved energy requirements for the most important building parts, components and installations for low-energy buildings. The aim is to achieve 75% reduction of energy consumption in the future building class 2020. The findings will contribute to the plans of introducing new building component requirements to force Danish manufacturers to use innovative solutions and to force manufacturers from other countries to market the best products only. (LN)

  14. The direct and indirect household energy requirements in the Republic of Korea from 1980 to 2000 - An input-output analysis

    International Nuclear Information System (INIS)

    Park, Hi-Chun; Heo, Eunnyeong

    2007-01-01

    As energy conservation can be realized through changes in the composition of goods and services consumed, there is a need to assess indirect and total household energy requirements. The Korean household sector was responsible for about 52% of the national primary energy requirement in the period from 1980 to 2000. Of this total, more than 60% of household energy requirement was indirect. Thus, not only direct but also indirect household energy requirement should be the target of energy conservation policies. Electricity became the main fuel in household energy use in 2000. Households consume more and more electricity intensive goods and services, a sign of increasing living standards. Increases in household consumption expenditure were responsible for a relatively high growth of energy consumption. Switching to consumption of less energy intensive products and decrease in energy intensities of products in 1990s contributed substantially to reduce the increase in the total household energy requirement. A future Korean study should apply a hybrid method as to reduce errors occurred by using uniform (average) prices in constructing energy input-output tables and as to make energy intensities of different years more comparable. (author)

  15. Reflex test reminders in required cancer synoptic templates decrease order entry error: An analysis of mismatch repair immunohistochemical orders to screen for Lynch syndrome

    Directory of Open Access Journals (Sweden)

    Mark R Kilgore

    2016-01-01

    Full Text Available Background: Endometrial carcinoma (EC is the most common extracolonic malignant neoplasm associated with Lynch syndrome (LS. LS is caused by autosomal dominant germline mutations in DNA mismatch repair (MMR genes. Screening for LS in EC is often evaluated by loss of immunohistochemical (IHC expression of DNA MMR enzymes MLH1, MSH2, MSH6, and PMS2 (MMR IHC. In July 2013, our clinicians asked that we screen all EC in patients ≤60 for loss of MMR IHC expression. Despite this policy, several cases were not screened or screening was delayed. We implemented an informatics-based approach to ensure that all women who met criteria would have timely screening. Subjects and Methods: Reports are created in PowerPath (Sunquest Information Systems, Tucson, AZ with custom synoptic templates. We implemented an algorithm on March 6, 2014 requiring pathologists to address MMR IHC in patients ≤60 with EC before sign out (S/O. Pathologists must answer these questions: is patient ≤60 (yes/no, if yes, follow-up questions (IHC done previously, ordered with addendum to follow, results included in report, N/A, or not ordered, if not ordered, one must explain. We analyzed cases from July 18, 2013 to August 31, 2016 preimplementation (PreImp and postimplementation (PostImp that met criteria. Data analysis was performed using the standard data package included with GraphPad Prism® 7.00 (GraphPad Software, Inc., La Jolla, CA, USA. Results: There were 147 patients who met criteria (29 PreImp and 118 PostImp. IHC was ordered in a more complete and timely fashion PostImp than PreImp. PreImp, 4/29 (13.8% cases did not get any IHC, but PostImp, only 4/118 (3.39% were missed (P = 0.0448. Of cases with IHC ordered, 60.0% (15/25 were ordered before or at S/O PreImp versus 91.2% (104/114 PostImp (P = 0.0004. Relative to day of S/O, the mean days of order delay were longer and more variable PreImp versus PostImp (12.9 ± 40.7 vs. -0.660 ± 1.15; P = 0.0227, with the average

  16. Reflex test reminders in required cancer synoptic templates decrease order entry error: An analysis of mismatch repair immunohistochemical orders to screen for Lynch syndrome.

    Science.gov (United States)

    Kilgore, Mark R; McIlwain, Carrie A; Schmidt, Rodney A; Norquist, Barbara M; Swisher, Elizabeth M; Garcia, Rochelle L; Rendi, Mara H

    2016-01-01

    Endometrial carcinoma (EC) is the most common extracolonic malignant neoplasm associated with Lynch syndrome (LS). LS is caused by autosomal dominant germline mutations in DNA mismatch repair (MMR) genes. Screening for LS in EC is often evaluated by loss of immunohistochemical (IHC) expression of DNA MMR enzymes MLH1, MSH2, MSH6, and PMS2 (MMR IHC). In July 2013, our clinicians asked that we screen all EC in patients ≤60 for loss of MMR IHC expression. Despite this policy, several cases were not screened or screening was delayed. We implemented an informatics-based approach to ensure that all women who met criteria would have timely screening. Reports are created in PowerPath (Sunquest Information Systems, Tucson, AZ) with custom synoptic templates. We implemented an algorithm on March 6, 2014 requiring pathologists to address MMR IHC in patients ≤60 with EC before sign out (S/O). Pathologists must answer these questions: is patient ≤60 (yes/no), if yes, follow-up questions (IHC done previously, ordered with addendum to follow, results included in report, N/A, or not ordered), if not ordered, one must explain. We analyzed cases from July 18, 2013 to August 31, 2016 preimplementation (PreImp) and postimplementation (PostImp) that met criteria. Data analysis was performed using the standard data package included with GraphPad Prism ® 7.00 (GraphPad Software, Inc., La Jolla, CA, USA). There were 147 patients who met criteria (29 PreImp and 118 PostImp). IHC was ordered in a more complete and timely fashion PostImp than PreImp. PreImp, 4/29 (13.8%) cases did not get any IHC, but PostImp, only 4/118 (3.39%) were missed ( P = 0.0448). Of cases with IHC ordered, 60.0% (15/25) were ordered before or at S/O PreImp versus 91.2% (104/114) PostImp ( P = 0.0004). Relative to day of S/O, the mean days of order delay were longer and more variable PreImp versus PostImp (12.9 ± 40.7 vs. -0.660 ± 1.15; P = 0.0227), with the average being before S/O PostImp. This algorithm

  17. Requirements on future energy supply. Analysis on the demand of future power plant capacity and strategy for a sustainable power utilization in Germany

    International Nuclear Information System (INIS)

    2003-08-01

    This strategy paper was drawn up with a view to maximum ecological compatibility of pwer plant modernization and sustainable power generation and use. The first part of the paper analyzes the power plants to be decommissioned on a medium-term basis and - against the background of several different scenarios for future power demand - an estimate of power plant capacities required by 2020. The second part describes the goals and concrete requirements of sustainable energy use. In the final part, the available instruments are presented, and those instruments are recommended that will be best suited for making power demand and supply efficient, sustainable and environment-friend.y [de

  18. Data Crosscutting Requirements Review

    Energy Technology Data Exchange (ETDEWEB)

    Kleese van Dam, Kerstin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Shoshani, Arie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Plata, Charity [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-04-01

    In April 2013, a diverse group of researchers from the U.S. Department of Energy (DOE) scientific community assembled to assess data requirements associated with DOE-sponsored scientific facilities and large-scale experiments. Participants in the review included facilities staff, program managers, and scientific experts from the offices of Basic Energy Sciences, Biological and Environmental Research, High Energy Physics, and Advanced Scientific Computing Research. As part of the meeting, review participants discussed key issues associated with three distinct aspects of the data challenge: 1) processing, 2) management, and 3) analysis. These discussions identified commonalities and differences among the needs of varied scientific communities. They also helped to articulate gaps between current approaches and future needs, as well as the research advances that will be required to close these gaps. Moreover, the review provided a rare opportunity for experts from across the Office of Science to learn about their collective expertise, challenges, and opportunities. The "Data Crosscutting Requirements Review" generated specific findings and recommendations for addressing large-scale data crosscutting requirements.

  19. Tank waste processing analysis: Database development, tank-by-tank processing requirements, and examples of pretreatment sequences and schedules as applied to Hanford Double-Shell Tank Supernatant Waste - FY 1993

    International Nuclear Information System (INIS)

    Colton, N.G.; Orth, R.J.; Aitken, E.A.

    1994-09-01

    This report gives the results of work conducted in FY 1993 by the Tank Waste Processing Analysis Task for the Underground Storage Tank Integrated Demonstration. The main purpose of this task, led by Pacific Northwest Laboratory, is to demonstrate a methodology to identify processing sequences, i.e., the order in which a tank should be processed. In turn, these sequences may be used to assist in the development of time-phased deployment schedules. Time-phased deployment is implementation of pretreatment technologies over a period of time as technologies are required and/or developed. The work discussed here illustrates how tank-by-tank databases and processing requirements have been used to generate processing sequences and time-phased deployment schedules. The processing sequences take into account requirements such as the amount and types of data available for the tanks, tank waste form and composition, required decontamination factors, and types of compact processing units (CPUS) required and technology availability. These sequences were developed from processing requirements for the tanks, which were determined from spreadsheet analyses. The spreadsheet analysis program was generated by this task in FY 1993. Efforts conducted for this task have focused on the processing requirements for Hanford double-shell tank (DST) supernatant wastes (pumpable liquid) because this waste type is easier to retrieve than the other types (saltcake and sludge), and more tank space would become available for future processing needs. The processing requirements were based on Class A criteria set by the U.S. Nuclear Regulatory Commission and Clean Option goals provided by Pacific Northwest Laboratory

  20. Battery Dimensioning and Life Cycle Costs Analysis for a Heavy-Duty Truck Considering the Requirements of Long-Haul Transportation

    Directory of Open Access Journals (Sweden)

    Ivan Mareev

    2017-12-01

    Full Text Available The use of heavy-duty battery electric trucks for long-haul transportation is challenging because of the required high energy amounts and thus the high capacity of traction batteries. Furthermore a high capacity battery implies high initial costs for the electric vehicle. This study investigates the required battery capacity for battery electric trucks considering the requirements of long-haul transportation in Germany and compares the life cycle costs of battery electric trucks and conventional diesel trucks in different transportation scenarios. The average consumption is simulated for different battery electric truck configurations on the main German highways and transportation scenarios incorporating battery charging during driver rest periods. The results show that in average case the required battery would restrict the payload to only 80% of a usual diesel truck payload that might be acceptable considering the statistical payload use. The life cycle costs in the examined scenarios also considering the charging infrastructure show that battery electric trucks can already perform on the same costs level as diesel trucks in certain scenarios.

  1. The analysis of the program to develop the Nuclear Waste Management System: Allocated requirements for the Office of Civilian Radioactive Waste Management Program

    International Nuclear Information System (INIS)

    Woods, T.W.

    1991-09-01

    This report is volume 3, part B, of the program to satisfy the allocated requirements of the Office of Civilian Radioactive Waste Management Program, in the development of the nuclear waste management system. The report is divided into the following sections: regulatory compliance; external relations; international programs; strategic and contingency planning; contract business management; and administrative services. (CS)

  2. Do educational requirements in vacancies match the educational attainments of job-holders? An analysis of web-based data for 279 occupations in the Czech Republic

    NARCIS (Netherlands)

    Tijdens, K.; Beblavý, M.; Thum-Thysen, A.

    2015-01-01

    European labour market policies aim to develop an early-warning tool for mismatches by monitoring job vacancies. Few studies have been able to measure these mismatches, among others because systematic information on educational requirements in vacancies is lacking. Our study explores mismatch for

  3. Uma análise sistêmica sociotecnológica da engenharia de requisitosA systemic, sociotechnological analysis of requirements engineering

    Directory of Open Access Journals (Sweden)

    Vinícius Medina Kern

    2010-01-01

    Full Text Available A engenharia de requisitos, etapa inicial da construção de sistemas de informação, requer intenso intercâmbio de informação entre profissionais de tecnologias da informação e comunicação, e peritos no negócio. A teoria e a prática comum da engenharia de requisitos, no entanto, são tecnocêntricas e caracterizadas por dificuldade de comunicação. A literatura recente aborda a concepção de sistemas sociotecnológicos, cujas propriedades emergem por meio da colaboração dinâmica entre pessoas e agentes artificiais. Este artigo apresenta um modelo sistêmico sociotecnológico da engenharia de requisitos com base no modelo CESM de Mario Bunge, segundo o qual todo sistema concreto pode ser representado segundo seus componentes, ambiente, estrutura e mecanismo. Entre os componentes, estão os peritos no negócio, profissionais de TIC, agentes artificiais e os objetos da colaboração dinâmica – modelo de domínio e requisitos. O mecanismo é essencialmente um processo de comunicação, com intercâmbio de informações e compartilhamento de conhecimento. Essa descrição presta-se à compreensão sistêmica da engenharia de requisitos, visando à intervenção para aliviar os problemas comunicacionais do processo e promover a emergência de requisitos que representem as reais necessidades do sistema. Requirements engineering, the initial stage in the building of information systems, requires intense exchange of information among professionals of information and communication technologies and business experts. The current theory and practice of requirements engineering, however, are technocentric and characterized by blocked communication. Recent literature discusses the idea of sociotechnological systems, whose properties emerge through the dynamic collaboration among individuals and artificial agents. This article presents a systemic view of requirements engineering based on Mario Bunge’s CESM model, under which any concrete

  4. Preanalytical requirements of urinalysis

    Science.gov (United States)

    Delanghe, Joris; Speeckaert, Marijn

    2014-01-01

    Urine may be a waste product, but it contains an enormous amount of information. Well-standardized procedures for collection, transport, sample preparation and analysis should become the basis of an effective diagnostic strategy for urinalysis. As reproducibility of urinalysis has been greatly improved due to recent technological progress, preanalytical requirements of urinalysis have gained importance and have become stricter. Since the patients themselves often sample urine specimens, urinalysis is very susceptible to preanalytical issues. Various sampling methods and inappropriate specimen transport can cause important preanalytical errors. The use of preservatives may be helpful for particular analytes. Unfortunately, a universal preservative that allows a complete urinalysis does not (yet) exist. The preanalytical aspects are also of major importance for newer applications (e.g. metabolomics). The present review deals with the current preanalytical problems and requirements for the most common urinary analytes. PMID:24627718

  5. Criticality analysis of the EU gas infrastructure: heightened security requirements for gas control and management centres; Kritikalitaetsanalyse der EU-Gasinfrastruktur: Erhoehte Sicherheitsanforderungen an Gasleit- und -kontrollzentren

    Energy Technology Data Exchange (ETDEWEB)

    Nerlich, Uwe; Umbach, Frank [Centre for European Security Strategies (CESS), Muenchen/Berlin (Germany)

    2009-11-15

    Since the terror attacks of 2001 critical infrastructure objects have gained substantially in strategic importance in the eyes of the German government and EU authorities as well as the European industry. This has not only been due to the worldwide increase in terrorist attacks on energy infrastructure objects but also to the attacks of Madrid on 11 March 2004 and London on 7 July 2005, which have shown that Europe is no longer being spared from terrorism. Strategies for the abatement of these hazards and their repercussions are therefore more urgently needed than ever before. This requires a differentiated assessment of the situation, as has been carried out, for example, in raising the security requirements and investigating the vulnerability of the gas management and control centres of the EU's Octavio project.

  6. CO{sub 2} capture efficiency and energy requirement analysis of power plant using modified calcium-based sorbent looping cycle

    Energy Technology Data Exchange (ETDEWEB)

    Li, Y.J.; Zhao, C.S.; Chen, H.C.; Ren, Q.Q.; Duan, L.B. [Southeast University, Nanjing (China). School of Energy & Environment

    2011-03-15

    This paper examines the average carbonation conversion, CO{sub 2} capture efficiency and energy requirement for post-combustion CO{sub 2} capture system during the modified calcium-based sorbent looping cycle. The limestone modified with acetic acid solution, i.e. calcium acetate is taken as an example of the modified calcium-based sorbents. The modified limestone exhibits much higher average carbonation conversion than the natural sorbent under the same condition. The CO{sub 2} capture efficiency increases with the sorbent flow ratios. Compared with the natural limestone, much less makeup mass flow of the recycled and the fresh sorbent is needed for the system when using the modified limestone at the same CO{sub 2} capture efficiency. Achieving 0.95 of CO{sub 2} capture efficiency without sulfation, 272 kJ/mol CO{sub 2} is required in the calciner for the natural limestone, whereas only 223 kJ/mol CO{sub 2} for the modified sorbent. The modified limestone possesses greater advantages in CO{sub 2} capture efficiency and energy consumption than the natural sorbent. When the sulfation and carbonation of the sorbents take place simultaneously, more energy is required. It is significantly necessary to remove SO{sub 2} from the flue gas before it enters the carbonator in order to reduce energy consumption in the calciner.

  7. Incidence, management and outcome of women requiring massive transfusion after childbirth in the Netherlands: secondary analysis of a nationwide cohort study between 2004 and 2006.

    Science.gov (United States)

    Ramler, Paul I; van den Akker, Thomas; Henriquez, Dacia D C A; Zwart, Joost J; van Roosmalen, Jos

    2017-06-19

    Postpartum hemorrhage remains the leading cause of maternal morbidity and mortality worldwide. Few population-based studies have examined the epidemiology of massive transfusion for postpartum hemorrhage. The aim of this study was to determine the incidence, management, and outcomes of women with postpartum hemorrhage who required massive transfusion in the Netherlands between 2004 and 2006. Data for all women from a gestational age of 20 weeks onwards who had postpartum hemorrhage requiring eight or more red blood cell concentrates were obtained from a nationwide population-based cohort study including all 98 hospitals with a maternity unit in the Netherlands. Three hundred twenty-seven women who had postpartum hemorrhage requiring massive transfusion were identified (massive transfusion rate 91 per 100,000 deliveries (95% confidence interval: 81-101)). The median blood loss was 4500 mL (interquartile range 3250-6000 mL) and the median number of red blood cell concentrates transfused was 11 units (interquartile range 9-16 units). Among women receiving massive transfusion, the most common cause of hemorrhage was uterine atony. Eighty-three women (25%) underwent hysterectomy, 227 (69%) were admitted to an intensive care unit, and three women died (case fatality rate 0,9%). The number of women in the Netherlands who had postpartum hemorrhage treated with massive transfusion was relatively high compared to other comparable settings. Evidence-based uniform management guidelines are necessary.

  8. Climate Regulation of Rearing-Related Buildings - Evaluating the Factors Related to the Energy Requirement of Heating/Cooling, and Analysis of Alternative Solutions

    Directory of Open Access Journals (Sweden)

    Toth Laszló

    2017-10-01

    Full Text Available The most notable role in the energy usage of rearing-related buildings belongs to barn climate. For animals, one of the most important climate parameter is the temperature of the barn atmosphere. This can be kept in the proper interval by either heating or cooling. Apart from the operation of technological solutions, the need for airing barns must be taken into consideration. This means there are special technical requirements for airing. Also, they can cause significant energy losses. The temperature limit of heating is mainly influenced by the technological temperature related to keeping the animal in question, its acceptable differences, the heat loss of the barn, and the airing requirement. Energy sources applicable to heating can be traditional sources (coal, oil, gas, renewable sources (solar, biomass, wind, water, or geothermal energy, or transformed energy (electricity. As these have specific operation systems, they also mean further challenges in implementing efficient energy usage. The usage of heating energy can either be optimised by the rational usage of the heating system, or machinery explicitly made for reserving energy. Sparing heating energy via recuperative heating exchange may cut costs significantly, which we also proved in this research with actual calculations. However, we have to state that the efficient usage of heat exchangers requires that the internal and external temperatures differ greatly, which has a huge impact on heat recovery performance.

  9. Analysis of non-typeable Haemophilous influenzae VapC1 mutations reveals structural features required for toxicity and flexibility in the active site.

    Directory of Open Access Journals (Sweden)

    Brooke Hamilton

    Full Text Available Bacteria have evolved mechanisms that allow them to survive in the face of a variety of stresses including nutrient deprivation, antibiotic challenge and engulfment by predator cells. A switch to dormancy represents one strategy that reduces energy utilization and can render cells resistant to compounds that kill growing bacteria. These persister cells pose a problem during treatment of infections with antibiotics, and dormancy mechanisms may contribute to latent infections. Many bacteria encode toxin-antitoxin (TA gene pairs that play an important role in dormancy and the formation of persisters. VapBC gene pairs comprise the largest of the Type II TA systems in bacteria and they produce a VapC ribonuclease toxin whose activity is inhibited by the VapB antitoxin. Despite the importance of VapBC TA pairs in dormancy and persister formation, little information exists on the structural features of VapC proteins required for their toxic function in vivo. Studies reported here identified 17 single mutations that disrupt the function of VapC1 from non-typeable H. influenzae in vivo. 3-D modeling suggests that side chains affected by many of these mutations sit near the active site of the toxin protein. Phylogenetic comparisons and secondary mutagenesis indicate that VapC1 toxicity requires an alternative active site motif found in many proteobacteria. Expression of the antitoxin VapB1 counteracts the activity of VapC1 mutants partially defective for toxicity, indicating that the antitoxin binds these mutant proteins in vivo. These findings identify critical chemical features required for the biological function of VapC toxins and PIN-domain proteins.

  10. When does State Interference with Property (now Amount to Expropriation? An Analysis of the Agri SA Court's State Acquisition Requirement (Part II

    Directory of Open Access Journals (Sweden)

    Ernst Jacobus Marais

    2015-04-01

    Full Text Available Section 25 of the Constitution provides two ways in which the state may interfere with property rights, namely deprivation (section 25(1 and expropriation (section 25(2. As only the latter requires compensation, there is an incentive for property holders to label any infringement with their property as expropriation in the hope of being compensated for their losses. It is therefore essential to have a principled distinction between deprivation and expropriation, especially given the danger that uncertainty in this regard can hold for legitimate land reform initiatives, which often entail severe limitations on property. This contribution attends to Agri South Africa v Minister for Minerals and Energy 2013 4 SA 1 (CC, where the Constitutional Court recently revisited this distinction and held that the distinguishing feature of expropriation is that it entails state acquisition of property. Without state acquisition the interference can (at most amount to deprivation. Unfortunately, viewing state acquisition as the "key requirement" for expropriation is problematic. Firstly, it ignores the true nature of this feature in that it is only a consequence of a valid expropriation rather than a pre-requisite for it – at least in terms of pre-constitutional law. It is therefore inaccurate, concerning both pre- and post-constitutional expropriation case law, to regard acquisition as an indispensable requirement for expropriation. Secondly, limiting the constitutional property inquiry to whether or not the state acquired property appears inadequate as a means of solving difficult cases where the state acquires property pursuant to infringements like taxation and criminal forfeiture. As both these examples result in state acquisition, there must be another explanation of why they do not amount to expropriation.

  11. Access to Heart Transplantation: A Proper Analysis of the Competing Risks of Death and Transplantation Is Required to Optimize Graft Allocation

    Directory of Open Access Journals (Sweden)

    Christelle Cantrelle, MS

    2017-08-01

    Conclusions. The heart allocation system strongly modifies the risk of pretransplant mortality related to heart failure severity. An in-depth competing risk analysis is therefore a more appropriate method to evaluate graft allocation systems. This knowledge should help to prioritize candidates in the context of a limited donor pool.

  12. Final disposal of spent fuel in the Finnish bedrock. Scope and requirements for site-specific safety analysis; Kaeytetyn polttoaineen loppusijoitus Suomen kallioperaeaen. Paikkakohtaisen turvallisuusanalyysin edellytykset ja mahdollisuudet

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The report is a summary of the research conducted in the period 1993 to 1996 into safety of spent fuel final disposal. The principal goal of the research in this period, as set in 1993, was to develop a strategy for site-specific safety analysis. At the same time efforts were to be continued to gather data and validate the technical approach for the analysis. The work aimed at having the data needed for the analysis available at the end of year 1998. A safety assessment update, TILA-96, prepared by VTT Energy, is published as a separate report. The assessment is based on the TVO-92 safety analysis, but takes into account the knowledge acquired after 1992 on safety aspects of the disposal system and the data gathered from the site investigations made by TVO and from the beginning of 1996, by Posiva. Since the site investigations are still ongoing and much of the data gathered still pending interpretation, only limited amount of new site-specific information has been available for the present assessment. (172 refs.).

  13. Analysis of existing data and specification of an experiment to determine the 252Cf half-life to the required degree of accuracy

    International Nuclear Information System (INIS)

    Lorenz, A.; Kharitonov, I.A.

    1994-02-01

    The methods used and the results obtained in measurements of the 252 Cf half-life are analyzed. In calculating the weighted mean value, additional error components as well as those given by the authors are taken into account. In order to reduce the error in the weighted mean value to less than 0.1%, the need and the requirements for an exact measurement are specified. A half-life of 2.6473±0.0028 years is recommended. (author). 16 refs, 3 tabs

  14. Mobile Anwendungssysteme zur Unterstützung ambulanter Pflegedienstleistungen: Anforderungsanalyse und Einsatzpotenziale / Mobile application systems for home nursing services support: requirements analysis and usage potentials

    Directory of Open Access Journals (Sweden)

    Robert, Sebastian

    2011-01-01

    Full Text Available Ambulatory nursing services increasingly gain significance due to immediate implications of demographic developments. However, portable application systems have only been established sporadically in home nursing environments unlike in the comparable domain of technical field service. This paper identifies a new mobile usage scenario by matching healthcare requirements with state-of-the-art concepts. Potentials concerning the support of the actual nursing care processes can be concluded on that basis. The results are of relevance not only to patients and nurses but also to various providers of healthcare and IT solutions.

  15. Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 7: PEP logistics and training plan requirements

    Science.gov (United States)

    1979-01-01

    Recommendations for logistics activities and logistics planning are presented based on the assumption that a system prime contractor will perform logistics functions to support all program hardware and will implement a logistics system to include the planning and provision of products and services to assure cost effective coverage of the following: maintainability; maintenance; spares and supply support; fuels; pressurants and fluids; operations and maintenance documentation training; preservation, packaging and packing; transportation and handling; storage; and logistics management information reporting. The training courses, manpower, materials, and training aids required will be identified and implemented in a training program.

  16. LEGACY MANAGEMENT REQUIRES INFORMATION

    International Nuclear Information System (INIS)

    CONNELL, C.W.; HILDEBRAND, R.D.

    2006-01-01

    ''Legacy Management Requires Information'' describes the goal(s) of the US Department of Energy's Office of Legacy Management (LM) relative to maintaining critical records and the way those goals are being addressed at Hanford. The paper discusses the current practices for document control, as well as the use of modern databases for both storing and accessing the data to support cleanup decisions. In addition to the information goals of LM, the Hanford Federal Facility Agreement and Consent Order, known as the ''Tri-Party Agreement'' (TPA) is one of the main drivers in documentation and data management. The TPA, which specifies discrete milestones for cleaning up the Hanford Site, is a legally binding agreement among the US Department of Energy (DOE), the Washington State Department of Ecology (Ecology), and the US Environmental Protection Agency (EPA). The TPA requires that DOE provide the lead regulatory agency with the results of analytical laboratory and non-laboratory tests/readings to help guide them in making decisions. The Agreement also calls for each signatory to preserve--for at least ten years after the Agreement has ended--all of the records in its or its contractors, possession related to sampling, analysis, investigations, and monitoring conducted. The tools used at Hanford to meet TPA requirements are also the tools that can satisfy the needs of LM

  17. Feed tank transfer requirements

    International Nuclear Information System (INIS)

    Freeman-Pollard, J.R.

    1998-01-01

    This document presents a definition of tank turnover; DOE responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements; records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor for use during Phase 1B

  18. Rapid quality assurance with requirements smells

    OpenAIRE

    Femmer, Henning; Méndez Fernández, Daniel; Wagner, Stefan; Eder, Sebastian

    2016-01-01

    Context: Bad requirements quality can cause expensive consequences during the software development lifecycle, especially if iterations are long and feedback comes late. Objectives: We aim at a light-weight static requirements analysis approach that allows for rapid checks immediately when requirements are written down. Method: We transfer the concept of code smells to Requirements Engineering as Requirements Smells. To evaluate the benefits and limitations, we define Requirements Smells, real...

  19. TANK FARM ENVIRONMENTAL REQUIREMENTS

    International Nuclear Information System (INIS)

    TIFFT, S.R.

    2003-01-01

    Through regulations, permitting or binding negotiations, Regulators establish requirements, limits, permit conditions and Notice of Construction (NOC) conditions with which the Office of River Protection (ORP) and the Tank Farm Contractor (TFC) must comply. Operating Specifications are technical limits which are set on a process to prevent injury to personnel, or damage to the facility or environment, The main purpose of this document is to provide specification limits and recovery actions for the TFC Environmental Surveillance Program at the Hanford Site. Specification limits are given for monitoring frequencies and permissible variation of readings from an established baseline or previous reading. The requirements in this document are driven by environmental considerations and data analysis issues, rather than facility design or personnel safety issues. This document is applicable to all single-shell tank (SST) and double-shell tank (DST) waste tanks, and the associated catch tanks and receiver tanks, and transfer systems. This Tank Farm Environmental Specifications Document (ESD) implements environmental-regulatory limits on the configuration and operation of the Hanford Tank Farms facility that have been established by Regulators. This ESD contains specific field operational limits and recovery actions for compliance with airborne effluent regulations and agreements, liquid effluents regulations and agreements, and environmental tank system requirements. The scope of this ESD is limited to conditions that have direct impact on Operations/Projects or that Operations Projects have direct impact upon. This document does not supercede or replace any Department of Energy (DOE) Orders, regulatory permits, notices of construction, or Regulatory agency agreements binding on the ORP or the TFC. Refer to the appropriate regulation, permit, or Notice of Construction for an inclusive listing of requirements

  20. ENVIRONMENTAL SPECIFICATION REQUIREMENTS

    International Nuclear Information System (INIS)

    TIFFT, S.R.

    2003-01-01

    Through regulations, permitting or binding negotiations, Regulators establish requirements, limits, permit conditions and Notice of Construction (NOC) conditions with which the Office of River Protection (ORP) and the Tank Farm Contractor (TFC) must comply. Operating Specifications are technical limits which are set on a process to prevent injury to personnel, or damage to the facility or environment. The main purpose of this document is to provide specification limits and recovery actions for the TFC Environmental Surveillance Program at the Hanford Site. Specification limits are given for monitoring frequencies and permissible variation of readings from an established baseline or previous reading. The requirements in this document are driven by environmental considerations and data analysis issues, rather than facility design or personnel safety issues. This document is applicable to all single-shell tank (SST) and double-shell tank (DST) waste tanks, and the associated catch tanks and receiver tanks, and transfer systems. This Tank Farm Environmental Specifications Document (ESD) implements environmental-regulatory limits on the configuration and operation of the Hanford Tank Farms facility that have been established by Regulators. This ESD contains specific field operational limits and recovery actions for compliance with airborne effluent regulations and agreements, liquid effluents regulations and agreements, and environmental tank system requirements. The scope of this ESD is limited to conditions that have direct impact on Operations Projects or that Operations/Projects have direct impact upon. This document does not supercede or replace any DOE Orders, regulatory permits, notices of construction, or Regulatory agency agreements binding on the ORP or the TFC. Refer to the appropriate regulation, permit, or NOC for an inclusive listing of requirements

  1. ENVIRONMENTAL SPECIFICATION REQUIREMENTS

    International Nuclear Information System (INIS)

    TIFFT, S.R.

    2003-01-01

    Through regulations, permitting or binding negotiations, Regulators establish requirements, limits, permit conditions and Notice of Construction (NOC) conditions with which the Office of River Protection (ORP) and the Tank Farm Contractor (TFC) must comply. Operating Specifications are technical limits which are set on a process to prevent injury to personnel, or damage to the facility or environment. The main purpose of this document is to provide specification limits and recovery actions for the TFC Environmental Surveillance Program at the Hanford Site. Specification limits are given for monitoring frequencies and permissible variation of readings from an established baseline or previous reading. The requirements in this document are driven by environmental considerations and data analysis issues, rather than facility design or personnel safety issues. This document is applicable to all SST and DST waste tanks, and the associated catch tanks and receiver tanks, and transfer systems. This Tank Farm ESD implements environmental-regulatory limits on the configuration and operation of the Hanford Tank Farms facility that have been established by Regulators. This ESD contains specific field operational limits and recovery actions for compliance with airborne effluent regulations and agreements, liquid effluents regulations and agreements, and environmental tank system requirements. The scope of this ESD is limited to conditions that have direct impact on Operations/Projects or that Operations/Projects have direct impact upon. This document does not supercede or replace any DOE Orders, regulatory permits, notices of construction, or Regulatory agency agreements binding on the ORP or the TFC. Refer to the appropriate regulation, permit, or NOC for an inclusive listing of requirements

  2. Analysis of protective and cytotoxic immune responses in vivo against metabolically inactivated and untreated cells of a mutagenized tumor line (requirements for tumor immunogenicity)

    International Nuclear Information System (INIS)

    Wehrmaker, A.; Lehmann, V.; Droege, W.

    1986-01-01

    The immunogenicity of a mutagenized subline (ESb-D) of the weakly immunogenic T-cell lymphoma L 5178 Y ESb has been characterized. The injection of 10(6) ESb-D cells ip did not establish lethal tumors in untreated DBA/2 mice but established tumors in sublethally irradiated mice. Injection of ESb-D cells into otherwise untreated DBA/2 mice established also a state of protective immunity against the subsequent injection of otherwise lethal doses of ESb tumor cells. Protection was only obtained after injection of intact but not UV-irradiated or mitomycin-C-treated ESb-D cells. A direct T-cell-mediated cytotoxic activity was also demonstrable in the spleen cells of DBA/2 mice after injection of ESb-D cells but not ESb cells. The cytotoxic activity was variant specific for ESb-D target cells, and it was induced only with intact but not UV-irradiated or mitomycin C-treated ESb-D cells. This suggested that the induction of protective and cytotoxic immunity may require the persistence of the antigen or unusually high antigen doses. The in vivo priming for a secondary in vitro cytotoxic response, in contrast, was achieved with intact and also with mitomycin C-treated ESb-D cells but again not with UV-irradiated ESb-D cells. This indicated that the metabolic activity was a minimal requirement for the in vivo immunogenicity of the ESb-D tumor line. The secondary cytotoxic activity was demonstrable on ESb-D and ESb target cells and could be restimulated in vitro about equally well with ESb-D and ESb cells. But the in vivo priming was again only obtained with ESb-D cells and not with ESb cells. These experiments thus demonstrated that the requirements for immunogenicity are more stringent in vivo than in vitro, and more stringent for the induction of direct cytotoxic and protective immunity in vivo than for the in vivo priming for secondary in vitro responses

  3. Design study of RL10 derivatives. Volume 3, part 2: Operational and flight support plan. [analysis of transportation requirements for rocket engine in support of space tug program

    Science.gov (United States)

    Shubert, W. C.

    1973-01-01

    Transportation requirements are considered during the engine design layout reviews and maintenance engineering analyses. Where designs cannot be influenced to avoid transportation problems, the transportation representative is advised of the problems permitting remedies early in the program. The transportation representative will monitor and be involved in the shipment of development engine and GSE hardware between FRDC and vehicle manufacturing plant and thereby will be provided an early evaluation of the transportation plans, methods and procedures to be used in the space tug support program. Unanticipated problems discovered in the shipment of development hardware will be known early enough to permit changes in packaging designs and transportation plans before the start of production hardware and engine shipments. All conventional transport media can be used for the movement of space tug engines. However, truck transport is recommended for ready availability, variety of routes, short transit time, and low cost.

  4. Payload/orbiter contamination control requirement study: Preliminary contamination mission support plan. [a management analysis of project planning of spacecraft sterilization

    Science.gov (United States)

    Bareiss, L. E.; Hooper, V. W.; Ress, E. B.

    1976-01-01

    Progress is reported on the mission support plan and those support activities envisioned to be applicable and necessary during premission and postmission phases of the Spacelab program. The purpose, role, and requirements of the contamination control operations for the first two missions of the Spacelab equipped Space Transportation System are discussed. The organization of the contamination control operation and its relationship to and interfaces with other mission support functions is also discussed. Some specific areas of contamination to be investigated are treated. They are: (1) windows and viewports, (2) experiment equipment, (3) thermal control surfaces, (4) the contaminant induced atmosphere (as differentiated from the normal ambient atmosphere at the orbit altitude), and (5) optical navigation instruments.

  5. Analysis of clinical data to determine the minimum number of sensors required for adequate skin temperature monitoring of superficial hyperthermia treatments.

    Science.gov (United States)

    Bakker, Akke; Holman, Rebecca; Rodrigues, Dario B; Dobšíček Trefná, Hana; Stauffer, Paul R; van Tienhoven, Geertjan; Rasch, Coen R N; Crezee, Hans

    2018-04-27

    Tumor response and treatment toxicity are related to minimum and maximum tissue temperatures during hyperthermia, respectively. Using a large set of clinical data, we analyzed the number of sensors required to adequately monitor skin temperature during superficial hyperthermia treatment of breast cancer patients. Hyperthermia treatments monitored with >60 stationary temperature sensors were selected from a database of patients with recurrent breast cancer treated with re-irradiation (23 × 2 Gy) and hyperthermia using single 434 MHz applicators (effective field size 351-396 cm 2 ). Reduced temperature monitoring schemes involved randomly selected subsets of stationary skin sensors, and another subset simulating continuous thermal mapping of the skin. Temperature differences (ΔT) between subsets and complete sets of sensors were evaluated in terms of overall minimum (T min ) and maximum (T max ) temperature, as well as T90 and T10. Eighty patients were included yielding a total of 400 hyperthermia sessions. Median ΔT was 50 sensors were used. Subsets of sensors result in underestimation of T max up to -2.1 °C (ΔT 95%CI), which decreased to -0.5 °C when >50 sensors were used. Thermal profiles (8-21 probes) yielded a median ΔT 50 stationary sensors or thermal profiles. Adequate coverage of the skin temperature distribution during superficial hyperthermia treatment requires the use of >50 stationary sensors per 400 cm 2 applicator. Thermal mapping is a valid alternative.

  6. Postoperative radiotherapy dose requirement in standard combined-modality practice for head and neck squamous cell carcinoma: Analysis of salient surgical and radiotherapy parameters in 2 cohorts.

    Science.gov (United States)

    Mohanti, Bidhu K; Thakar, Alok; Kaur, Jaspreet; Bahadur, Sudhir; Malik, Monica; Gandhi, Ajeet K; Bhasker, Suman; Sharma, Atul

    2017-09-01

    This study compared 2 sequential cohorts to identify the postoperative radiotherapy (PORT) dose requirement for head and neck squamous cell carcinoma (HNSCC). Two distinct PORT dose regimens were prescribed over 11 years; group 1 received 56 Gy or less, and group 2 received 60 Gy or more. The 2D and 3D techniques were used. Two sequential cohorts consisted of 478 patients, with mean and median follow-up for group 1 and 2 as: 37.0 versus 28.5 months and 13.8 versus 13.1 months, respectively. Grades 3-4 mucosal toxicities (11.4% vs 28.3%), hospitalization (3.2% vs 17.4%), and nasogastric feeding (11.9% vs 29.7%) were higher in group 2. The 2-year disease-free survival (DFS) was higher with PORT >60 Gy for the following factors: age ≤ 50 years (P = .041); ≥ 4 positive nodes (P = .029); and overall treatment time (OTT) ≥ 100 days (P = .042). Except for the benefit of doses >60 Gy for limited parameters, a lower PORT dose did not compromise the results and can potentially reduce the morbidities and healthcare costs. © 2017 Wiley Periodicals, Inc.

  7. Analysis of Issues for Project Scheduling by Multiple, Dispersed Schedulers (distributed Scheduling) and Requirements for Manual Protocols and Computer-based Support

    Science.gov (United States)

    Richards, Stephen F.

    1991-01-01

    Although computerized operations have significant gains realized in many areas, one area, scheduling, has enjoyed few benefits from automation. The traditional methods of industrial engineering and operations research have not proven robust enough to handle the complexities associated with the scheduling of realistic problems. To address this need, NASA has developed the computer-aided scheduling system (COMPASS), a sophisticated, interactive scheduling tool that is in wide-spread use within NASA and the contractor community. Therefore, COMPASS provides no explicit support for the large class of problems in which several people, perhaps at various locations, build separate schedules that share a common pool of resources. This research examines the issue of distributing scheduling, as applied to application domains characterized by the partial ordering of tasks, limited resources, and time restrictions. The focus of this research is on identifying issues related to distributed scheduling, locating applicable problem domains within NASA, and suggesting areas for ongoing research. The issues that this research identifies are goals, rescheduling requirements, database support, the need for communication and coordination among individual schedulers, the potential for expert system support for scheduling, and the possibility of integrating artificially intelligent schedulers into a network of human schedulers.

  8. Genotyping by Sequencing for SNP-Based Linkage Map Construction and QTL Analysis of Chilling Requirement and Bloom Date in Peach [Prunus persica (L. Batsch].

    Directory of Open Access Journals (Sweden)

    Douglas Gary Bielenberg

    Full Text Available Low-cost, high throughput genotyping methods are crucial to marker discovery and marker-assisted breeding efforts, but have not been available for many 'specialty crops' such as fruit and nut trees. Here we apply the Genotyping-By-Sequencing (GBS method developed for cereals to the discovery of single nucleotide polymorphisms (SNPs in a peach F2 mapping population. Peach is a genetic and genomic model within the Rosaceae and will provide a template for the use of this method with other members of this family. Our F2 mapping population of 57 genotypes segregates for bloom time (BD and chilling requirement (CR and we have extensively phenotyped this population. The population derives from a selfed F1 progeny of a cross between 'Hakuho' (high CR and 'UFGold' (low CR. We were able to successfully employ GBS and the TASSEL GBS pipeline without modification of the original methodology using the ApeKI restriction enzyme and multiplexing at an equivalent of 96 samples per Illumina HiSeq 2000 lane. We obtained hundreds of SNP markers which were then used to construct a genetic linkage map and identify quantitative trait loci (QTL for BD and CR.

  9. A Framework for Better Understanding and Enhancing Direct Contact Membrane Distillation (DCMD) in Terms of Module Design, Cost Analysis and Energy Required

    KAUST Repository

    AbuHannoud, Ali

    2011-07-01

    Water is becoming scarcer and several authors have highlighted the upcoming problem of higher water salinity and the difficulty of treating and discharging water. Moreover, current discoveries of problems with chemicals that have been used for pretreating or post-treating water alerted scientists to research better solutions to treat water. Membrane distillation (MD) is a promising technology that might replace current processes as it has lower pretreatment requirements combined with a tremendous ability to treat a wide range of feed sources while producing very high product quality. If it enters the market, it will have a big influence on all products, from food industry to spaceflight. However, there are several problems which make MD a hot topic for research. One of them is the question about the real cost of MD in terms of heating feed and cooling distillate over time with respect to product quantity and quality. In this work, extensive heating and cooling analyses are covered to answer this question in order to enhance the MD process. Results show energy cost to produce water and the main source of energy loss for direct contact membrane distillation (DCMD), and several suggestions are made in order to better understand and hence enhance the process.

  10. Mutational analysis of the glycosylphosphatidylinositol (GPI) anchor pathway demonstrates that GPI-anchored proteins are required for cell wall biogenesis and normal hyphal growth in Neurospora crassa.

    Science.gov (United States)

    Bowman, Shaun M; Piwowar, Amy; Al Dabbous, Mash'el; Vierula, John; Free, Stephen J

    2006-03-01

    Using mutational and proteomic approaches, we have demonstrated the importance of the glycosylphosphatidylinositol (GPI) anchor pathway for cell wall synthesis and integrity and for the overall morphology of the filamentous fungus Neurospora crassa. Mutants affected in the gpig-1, gpip-1, gpip-2, gpip-3, and gpit-1 genes, which encode components of the N. crassa GPI anchor biosynthetic pathway, have been characterized. GPI anchor mutants exhibit colonial morphologies, significantly reduced rates of growth, altered hyphal growth patterns, considerable cellular lysis, and an abnormal "cell-within-a-cell" phenotype. The mutants are deficient in the production of GPI-anchored proteins, verifying the requirement of each altered gene for the process of GPI-anchoring. The mutant cell walls are abnormally weak, contain reduced amounts of protein, and have an altered carbohydrate composition. The mutant cell walls lack a number of GPI-anchored proteins, putatively involved in cell wall biogenesis and remodeling. From these studies, we conclude that the GPI anchor pathway is critical for proper cell wall structure and function in N. crassa.

  11. Knowing requires data

    Science.gov (United States)

    Naranjo, Ramon C.

    2017-01-01

    Groundwater-flow models are often calibrated using a limited number of observations relative to the unknown inputs required for the model. This is especially true for models that simulate groundwater surface-water interactions. In this case, subsurface temperature sensors can be an efficient means for collecting long-term data that capture the transient nature of physical processes such as seepage losses. Continuous and spatially dense network of diverse observation data can be used to improve knowledge of important physical drivers, conceptualize and calibrate variably saturated groundwater flow models. An example is presented for which the results of such analysis were used to help guide irrigation districts and water management decisions on costly upgrades to conveyance systems to improve water usage, farm productivity and restoration efforts to improve downstream water quality and ecosystems.

  12. Knowledge and institutional requirements to promote land degradation neutrality in drylands - An analysis of the outcomes of the 3rd UNCCD scientific conference

    Science.gov (United States)

    Akhtar-Schuster, Mariam; Safriel, Uriel; Abraham, Elena; de Vente, Joris; Essahli, Wafa; Escadafal, Richard; Stringer, Lindsay

    2015-04-01

    Achieving land degradation neutrality (LDN) through sustainable land management (SLM) targets the maintenance or restoration of the productivity of land, and therefore has to include decision-makers, knowledge generators and knowledge holders at the different relevant geographic scales. In order to enhance the implementation of the Convention, the Conference of the Parties (COP) of the United Nations Convention to Combat Desertification therefore decided that each future session of its Committee on Science and Technology (CST) would be organized in a predominantly scientific and technical conference-style format. This contribution will outline the major outcomes of UNCCD's 3rd scientific conference that will be held in Cancún, Mexico, from 9 to 12 March 2015, on addressing desertification, land degradation and drought issues (DLDD) for poverty reduction and sustainable development. The conference follows an exceptional new round table conference format that will allow the various stakeholders to discuss scientific as well as the contribution of traditional knowledge and practices in combating land degradation. This format should provide two-way communication and enable deeper insight into the availability and contribution of all forms of knowledge for achieving LDN through the assessment of: • the vulnerability of lands to DLDD and climate change and the adaptive capacities of socio-ecosystems; • best examples of adapted, knowledge-based practices and technologies; • monitoring and assessment methods to evaluate the effectiveness of adaptation practices and technologies. The outcomes of UNCCD's 3rd scientific conference will serve as a basis for discussing: • contributions of science to diagnose the status of land; • research gaps that need to be addressed to achieve LDN for poverty reduction; • additional institutional requirements to optimally bridge knowledge generation, knowledge maintenance and knowledge implementation at the science

  13. Incidence of traumatic long-bone fractures requiring in-hospital management: a prospective age- and gender-specific analysis of 4890 fractures.

    Science.gov (United States)

    Meling, Terje; Harboe, Knut; Søreide, Kjetil

    2009-11-01

    Musculoskeletal trauma represents a considerable global health burden; however, reliable population-based incidence data are lacking. Thus, we prospectively investigated the age- and sex-specific incidence patterns of long-bone fractures in a defined population. A 4-year prospective study of all long-bone fractures in a defined Norwegian population was carried out. The demographic data, as well as data on fracture type and location and mode of treatment were collected using recognised classification (e.g., AO/OTA - Arbeitsgemeinschaft für Osteosynthesefragen/Orthopaedic Trauma Association; Gustilo-Anderson (GA) for open fractures). Age- and sex-adjusted incidences were calculated using population statistics. During the study period, 4890 long-bone fractures were recorded. The overall incidence per 100,000 per year was 406 with a 95% confidence interval (95%CI) of 395-417. The age-adjusted incidence for those lower than that for those >or=16 years (427; 95%CI: 414-440). The overall male incidence (337; 95%CI: 322-355) was lower than the female (476; 95%CI: 459-493), but the male:female ratio was 2:1 among those or=50 years. The upper limb fractures had an overall incidence of 159 (95%CI: 152-166), whereas the lower limb fracture incidence was 247 (95%CI: 238-256). Open fractures occurred in 3%, with an incidence of 13 (95%CI: 11-15). Paediatric fractures were more likely to be treated conservatively with only 8% requiring internal fixation, compared to 56% internal fixation in those >or=16 years of age. An increase in the use of angular stable plates occurred during the study period. This prospectively collected study of long-bone fractures in a defined population recognises age- and gender-specific fracture patterns. Boys predominate in the younger age group for which treatment is basically conservative. In the senior population, women and operative treatment predominate.

  14. Feed tank transfer requirements

    International Nuclear Information System (INIS)

    Freeman-Pollard, J.R.

    1998-01-01

    This document presents a definition of tank turnover. Also, DOE and PC responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements are presented for two cases (i.e., tank modifications occurring before tank turnover and tank modification occurring after tank turnover). Finally, records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor are presented

  15. Feed tank transfer requirements

    Energy Technology Data Exchange (ETDEWEB)

    Freeman-Pollard, J.R.

    1998-09-16

    This document presents a definition of tank turnover. Also, DOE and PC responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements are presented for two cases (i.e., tank modifications occurring before tank turnover and tank modification occurring after tank turnover). Finally, records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor are presented.

  16. Access to Heart Transplantation: A Proper Analysis of the Competing Risks of Death and Transplantation Is Required to Optimize Graft Allocation.

    Science.gov (United States)

    Cantrelle, Christelle; Legeai, Camille; Latouche, Aurélien; Tuppin, Philippe; Jasseron, Carine; Sebbag, Laurent; Bastien, Olivier; Dorent, Richard

    2017-08-01

    Heart allocation systems are usually urgency-based, offering grafts to candidates at high risk of waitlist mortality. In the context of a revision of the heart allocation rules, we determined observed predictors of 1-year waitlist mortality in France, considering the competing risk of transplantation, to determine which candidate subgroups are favored or disadvantaged by the current allocation system. Patients registered on the French heart waitlist between 2010 and 2013 were included. Cox cause-specific hazards and Fine and Gray subdistribution hazards were used to determine candidate characteristics associated with waitlist mortality and access to transplantation. Of the 2053 candidates, 7 variables were associated with 1-year waitlist mortality by the Fine and Gray method including 4 candidate characteristics related to heart failure severity (hospitalization at listing, serum natriuretic peptide level, systolic pulmonary artery pressure, and glomerular filtration rate) and 3 characteristics not associated with heart failure severity but with lower access to transplantation (blood type, age, and body mass index). Observed waitlist mortality for candidates on mechanical circulatory support was like that of others. The heart allocation system strongly modifies the risk of pretransplant mortality related to heart failure severity. An in-depth competing risk analysis is therefore a more appropriate method to evaluate graft allocation systems. This knowledge should help to prioritize candidates in the context of a limited donor pool.

  17. Structure-function analysis of human TYW2 enzyme required for the biosynthesis of a highly modified Wybutosine (yW base in phenylalanine-tRNA.

    Directory of Open Access Journals (Sweden)

    Virginia Rodriguez

    Full Text Available Posttranscriptional modifications are critical for structure and function of tRNAs. Wybutosine (yW and its derivatives are hyper-modified guanosines found at the position 37 of eukaryotic and archaeal tRNA(Phe. TYW2 is an enzyme that catalyzes α-amino-α-carboxypropyl transfer activity at the third step of yW biogenesis. Using complementation of a ΔTYW2 strain, we demonstrate here that human TYW2 (hTYW2 is active in yeast and can synthesize the yW of yeast tRNA(Phe. Structure-guided analysis identified several conserved residues in hTYW2 that interact with S-adenosyl-methionine (AdoMet, and mutation studies revealed that K225 and E265 are critical residues for the enzymatic activity. We previously reported that the human TYW2 is overexpressed in breast cancer. However, no difference in the tRNA(Phe modification status was observed in either normal mouse tissue or a mouse tumor model that overexpresses Tyw2, indicating that hTYW2 may have a role in tumorigenesis unrelated to yW biogenesis.

  18. Evaluation of Transient Pin-Stress Requirements for Spacecraft Launching in Lightning Environments. Pain Free Analysis to Alleviate Those Pin Stress Headaches

    Science.gov (United States)

    Edwards, Paul; Terseck, Alex; Trout, Dawn

    2016-01-01

    Spacecraft are generally protected from direct lightning attachment by encapsulation within the payload fairing of a launch vehicle and the ground structures that exist at the launch site. Regardless of where lightning strikes, potentially damaging indirect effects prevail from the coupling of electromagnetic fields into a loop created by outer shield of the payload umbilical. The energy coupled into individual spacecraft circuits is dependent on the umbilical current drive, the cable transfer impedance and the source/ load circuitry, and the reference potential used. Lightning induced transient susceptibility of the spacecraft avionics needs to be fully understood in order to define realistic re-test criteria in the event of a lightning occurrence during the launch campaign. Use of standards such as RTCA/DO-160 & SAE 5412 has some applicability but do not represent the indirect environment adequately. This paper evaluates the launch pad environments, the measurement data available, and computer simulations to provide pain-free analysis to alleviate the transient pin-stress headaches for spacecraft launching in Lightning environments.

  19. Does atlas-based autosegmentation of neck levels require subsequent manual contour editing to avoid risk of severe target underdosage? A dosimetric analysis

    International Nuclear Information System (INIS)

    Voet, Peter W.J.; Dirkx, Maarten L.P.; Teguh, David N.; Hoogeman, Mischa S.; Levendag, Peter C.; Heijmen, Ben J.M.

    2011-01-01

    Background and purpose: To investigate the dosimetric impact of not editing auto-contours of the elective neck and organs at risk (OAR), generated with atlas-based autosegmentation (ABAS) (Elekta software) for head and neck cancer patients. Materials and methods: For nine patients ABAS auto-contours and auto-contours edited by two observers were available. Based on the non-edited auto-contours clinically acceptable IMRT plans were constructed (designated 'ABAS plans'). These plans were then evaluated for the two edited structure sets, by quantifying the percentage of the neck-PTV receiving more than 95% of the prescribed dose (V 95 ) and the near-minimum dose (D 99 ) in the neck PTV. Dice coefficients and mean contour distances were calculated to quantify the similarity of ABAS auto-contours with the structure sets edited by observer 1 and observer 2. To study the dosimetric importance of editing OAR auto-contours a new IMRT plan was generated for each patient-observer combination, based on the observer's edited CTV and the non-edited salivary gland auto-contours. For each plan mean doses for the non-edited glands were compared with doses for the same glands edited by the observer. Results: For both observers, edited neck CTVs were larger than ABAS auto-contours (p ≤ 0.04), by a mean of 8.7%. When evaluating ABAS plans on the PTVs of the edited structure sets, V 95 reduced by 7.2% ± 5.4% (1 SD) (p 99 was 14.2 Gy (range 1-54 Gy). Even for Dice coefficients >0.8 and mean contour distances 99 up to 11 Gy were observed. For treatment plans based on observer PTVs and non-edited auto-contoured salivary glands, the mean doses in the edited glands differed by only -0.6 Gy ± 1.0 Gy (p = 0.06). Conclusions: Editing of auto-contoured neck CTVs generated by ABAS is required to avoid large underdosages in target volumes. Often used similarity measures for evaluation of auto-contouring algorithms, such as dice coefficients, do not predict well for expected PTV underdose

  20. Mandatory requirements in relation to air, soil, or water protection. Analysis of need and feasibility. Final Report (Tasks 3 and 4)

    Energy Technology Data Exchange (ETDEWEB)

    Diaz-Chavez, R.; Kunen, E.; Walden, D.; Fingerman, K.; Arya, L; Chalmers, J. [Winrock International, Little Rock (United States); Kretschmer, B.; Polakova, J.; Farmer, A.; Bowyer, C.; Menadue, H. [Institute for European Environmental Policy IEEP, London (United Kingdom); Alberici, S.; Toop, G. [Ecofys, Utrecht (Netherlands)

    2013-02-15

    This study focusses on the environmental impacts, both within and outside Europe, associated with the agricultural management of biofuel feedstocks consumed within the European Union (EU). This study has focussed on an examination of the environmental effects associated with crops that: Represent the prevailing cropping type in a country/region and are already produced in intensive agricultural systems and in zones with vulnerable soil/water conditions; and have become the prevailing feedstocks to supply the EU biofuel markets. The report starts with an overview of key biofuel crops and focus countries within and outside the EU (Section 2). Section 3 provides an overview of soils risks from biofuels consumed in the EU. It sets out the type of risks arising from the cultivation of biofuel feedstocks within Europe and in non-EU countries, provides information from case studies on actual risks arising in the selected countries, as well as considering the scope and effectiveness of existing provisions for soil protection. A synthesis of the estimated risks per region for different types of risks concludes the section. Section 4 sets out water risks associated with the identified biofuel crops in the selected EU and non-EU focus areas. Similarly to the soil section, the assessment of existing provisions for water protection addresses their scope and effectiveness in containing the pressures from biofuel feedstock production and concludes with a synthesis estimating the actual risks. Section 5 provides a corresponding analysis of air quality risks. Section 6 discussed the feasibility of introducing additional sustainability criteria in the RED to mitigate identified risks to soil, water and air and overall concludes the study.

  1. Fuel rod analysis to respond to high burnup and demanding loading requirements. Probabilistic methodology recovers design margins narrowed by degrading fuel thermal conductivity and progressing FGR

    Energy Technology Data Exchange (ETDEWEB)

    Eberle, R; Heins, L; Sontheimer, F [Siemens AG Unternehmensbereich KWU, Erlangen (Germany)

    1997-08-01

    The proof that fuel rods will safely withstand all loads arising from inpile service conditions is generally achieved through the assessment of a number of design criteria by using a conservative analysis methodology in conjunction with design limits ``on the safe side``. The classical approach is the application of a fuel rod code to the Worst Case which is defined by the combination of most unfavorable conditions and assumptions with respect to the criterion under consideration. As it is evident that the deterministic construction of such Worst Cases imply an (unknown but) intuitively very high degree of conservatism, it is not surprising that this will develop to cause problems the more demanding fuel insertion conditions have to be anticipated (increased burnup, high efficiency loading schemes, etc.). A certain relief can be gained form cautious revisions of single design limits based on grown performance experience. But this increase of knowledge allows as well to change the established deterministic ``go/no-go`` conception into a better differentiating assessment methodology by which the quantification of the implied conservatism and the remaining design margins is possible: the Probabilistic Design Methodology (PDM). Principles and elements of the PDM are described. An essential prerequisite is a best-estimate fuel rod code which incorporates the latest state of knowledge about potential performance limiting phenomena (e.g. burnup degradation of fuel oxide thermal conductivity) as Siemens/KWU`s CARO-E does. An example is given how input distributions for rod data and model parameters transfer into a frequency distribution of maximum rod internal pressure, and indications are given how this is to be interpreted in view of a probabilistically re-formulated design criterion. The PDM provides a realistic conservative assessment of design criteria and will thus recover design margins for increasingly aggravated loading conditions. (author). 9 refs, 9 figs, 2 tabs.

  2. Fuel rod analysis to respond to high burnup and demanding loading requirements. Probabilistic methodology recovers design margins narrowed by degrading fuel thermal conductivity and progressing FGR

    International Nuclear Information System (INIS)

    Eberle, R.; Heins, L.; Sontheimer, F.

    1997-01-01

    The proof that fuel rods will safely withstand all loads arising from inpile service conditions is generally achieved through the assessment of a number of design criteria by using a conservative analysis methodology in conjunction with design limits ''on the safe side''. The classical approach is the application of a fuel rod code to the Worst Case which is defined by the combination of most unfavorable conditions and assumptions with respect to the criterion under consideration. As it is evident that the deterministic construction of such Worst Cases imply an (unknown but) intuitively very high degree of conservatism, it is not surprising that this will develop to cause problems the more demanding fuel insertion conditions have to be anticipated (increased burnup, high efficiency loading schemes, etc.). A certain relief can be gained form cautious revisions of single design limits based on grown performance experience. But this increase of knowledge allows as well to change the established deterministic ''go/no-go'' conception into a better differentiating assessment methodology by which the quantification of the implied conservatism and the remaining design margins is possible: the Probabilistic Design Methodology (PDM). Principles and elements of the PDM are described. An essential prerequisite is a best-estimate fuel rod code which incorporates the latest state of knowledge about potential performance limiting phenomena (e.g. burnup degradation of fuel oxide thermal conductivity) as Siemens/KWU's CARO-E does. An example is given how input distributions for rod data and model parameters transfer into a frequency distribution of maximum rod internal pressure, and indications are given how this is to be interpreted in view of a probabilistically re-formulated design criterion. The PDM provides a realistic conservative assessment of design criteria and will thus recover design margins for increasingly aggravated loading conditions. (author). 9 refs, 9 figs, 2 tabs

  3. Comparative proteomic analysis of Salmonella enterica serovar Typhimurium ppGpp-deficient mutant to identify a novel virulence protein required for intracellular survival in macrophages

    Directory of Open Access Journals (Sweden)

    Kumagai Yoshinori

    2010-12-01

    Full Text Available Abstract Background The global ppGpp-mediated stringent response in pathogenic bacteria plays an important role in the pathogenesis of bacterial infections. In Salmonella enterica serovar Typhimurium (S. Typhimurium, several genes, including virulence genes, are regulated by ppGpp when bacteria are under the stringent response. To understand the control of virulence genes by ppGpp in S. Typhimurium, agarose 2-dimensional electrophoresis (2-DE combined with mass spectrometry was used and a comprehensive 2-DE reference map of amino acid-starved S. Typhimurium strain SH100, a derivative of ATCC 14028, was established. Results Of the 366 examined spots, 269 proteins were successfully identified. The comparative analysis of the wild-type and ppGpp0 mutant strains revealed 55 proteins, the expression patterns of which were affected by ppGpp. Using a mouse infection model, we further identified a novel virulence-associated factor, STM3169, from the ppGpp-regulated and Salmonella-specific proteins. In addition, Salmonella strains carrying mutations in the gene encoding STM3169 showed growth defects and impaired growth within macrophage-like RAW264.7 cells. Furthermore, we found that expression of stm3169 was controlled by ppGpp and SsrB, a response regulator of the two-component system located on Salmonella pathogenicity island 2. Conclusions A proteomic approach using a 2-DE reference map can prove a powerful tool for analyzing virulence factors and the regulatory network involved in Salmonella pathogenesis. Our results also provide evidence of a global response mediated by ppGpp in S. enterica.

  4. Coke quality requirements in POSCO

    Energy Technology Data Exchange (ETDEWEB)

    Song, J.; Yi, J.; Wang, H. [POSCO (Republic of Korea). Cokemaking Dept.

    2001-07-01

    The 26 overheads describes coke quality requirements in POSCO, Republic of Korea. It is concluded that it is necessary to develop new coal and to prompt technical development in order to produce high quality coke. To improve coke quality. Posco had applied DMAIC (define, measurement, analysis, improvement, control) technique which is part of Six-Sigma activity.

  5. Equipment Operational Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  6. LH2 airport requirements study

    Science.gov (United States)

    Brewer, G. D. (Editor)

    1976-01-01

    A preliminary assessment of the facilities and equipment which will be required at a representative airport is provided so liquid hydrogen LH2 can be used as fuel in long range transport aircraft in 1995-2000. A complete facility was conceptually designed, sized to meet the projected air traffic requirement. The facility includes the liquefaction plant, LH2, storage capability, and LH2 fuel handling system. The requirements for ground support and maintenance for the LH2 fueled aircraft were analyzed. An estimate was made of capital and operating costs which might be expected for the facility. Recommendations were made for design modifications to the reference aircraft, reflecting results of the analysis of airport fuel handling requirements, and for a program of additional technology development for air terminal related items.

  7. PFP requirements development planning guide

    International Nuclear Information System (INIS)

    SINCLAIR, J.C.

    1999-01-01

    The PFP Requirements Development Planning Guide presents the strategy and process used for the identification, allocation, and maintenance of requirements within the Plutonium Finishing Plant (PFP) integrated project baseline. Future revisions to this document will be included as attachments (e.g., results of the PFP Requirements Analysis attributable to this approach). This document is intended be a Project-owned management tool. As such, this document will periodically require revisions resulting from improvements of the information, processes, and techniques as now described. Future updates may be made to this document by PFP management and final approval of the content will be accomplished in a Baseline Change Request as it impacts the Multi-Year Work Plan, or baseline information managed in the Hanford Site Systems Engineering Baseline

  8. The molecular variability analysis of the RNA 3 of fifteen isolates of Prunus necrotic ringspot virus sheds light on the minimal requirements for the synthesis of its subgenomic RNA.

    Science.gov (United States)

    Aparicio, Frederic; Pallás, Vicente

    2002-01-01

    The nucleotide sequences of the RNA 3 of fifteen isolates of Prunus necrotic ringspot virus (PNRSV) varying in the symptomatology they cause in six different Prunus spp. were determined. Analysis of the molecular variability has allowed, in addition to study the phylogenetic relationships among them, to evaluate the minimal requirements for the synthesis of the subgenomic RNA in Ilarvirus genus and their comparison to other members of the Bromoviridae family. Computer assisted comparisons led recently to Jaspars (Virus Genes 17, 233-242, 1998) to propose that a hairpin structure in viral minus strand RNA is required for subgenomic promoter activity of viruses from at least two, and possibly all five, genera in the family of Bromoviridae. For PNRSV and Apple mosaic virus two stable hairpins were proposed whereas for the rest of Ilarviruses and the other four genera of the Bromoviridae family only one stable hairpin was predicted. Comparative analysis of this region among the fifteen PNRSV isolates characterized in this study revealed that two of them showed a 12-nt deletion that led to the disappearance of the most proximal hairpin to the initiation site. Interestingly, the only hairpin found in these two isolates is very similar in primary and secondary structure to the one previously shown in Brome mosaic virus to be required for the synthesis of the subgenomic RNA. In this hairpin, the molecular diversity was concentrated mostly at the loop whereas compensatory mutations were observed at the base of the stem strongly suggesting its functional relevance. The evolutionary implications of these observations are discussed.

  9. Regulation No. 100/2006 Coll. of the Ministry of Health of the Slovak Republic dated as of February 6, 2006 laying down the requirements for natural healing water and natural mineral water, Balneology details of the report, distribution, extent of monitoring and content analysis of natural healing waters and natural mineral waters and their products and requirements for entry to the list of accredited laboratories maintained by the State Commission bathroom

    International Nuclear Information System (INIS)

    2006-01-01

    This Regulation provides: (a) requirements for natural healing water and natural mineral water; (b) requirements for the recognition of natural mineral water; (c) details of balneology report; (d) distribution of natural healing waters and natural mineral water; (e) the extent of tracking of natural healing waters and natural mineral waters and their products; (f) content analysis of natural healing waters and natural mineral waters and their products; (g) registration requirements for accredited laboratories in the list maintained by the State Commission bathroom. This Regulation came into force on March 1, 2006.

  10. Infrastructure Requirements for an Expanded Fuel Ethanol Industry

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, Robert E. [Downstream Alternatives, Inc., South Bend, IN (United States)

    2002-01-15

    This report provides technical information specifically related to ethanol transportation, distribution, and marketing issues. This report required analysis of the infrastructure requirements for an expanded ethanol industry.

  11. Postmarket Requirements and Commitments

    Data.gov (United States)

    U.S. Department of Health & Human Services — Provides information to the public on postmarket requirements and commitments. The phrase postmarket requirements and commitments refers to studies and clinical...

  12. Requirements for existing buildings

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Wittchen, Kim Bjarne

    This report collects energy performance requirements for existing buildings in European member states by June 2012.......This report collects energy performance requirements for existing buildings in European member states by June 2012....

  13. Replacing reserve requirements

    OpenAIRE

    Edward J. Stevens

    1993-01-01

    An examination of the fading significance of the Federal Reserve System's reserve requirements and the recent flowering of required clearing balances, a rapidly growing feature of Reserve Bank operations.

  14. PBF task and training requirements analysis

    International Nuclear Information System (INIS)

    Blackman, H.S.; Gertman, D.I.; Petersen, R.J.

    1983-05-01

    Task analyses were used to assist in identifying improvements needed in the training curriculum for selected positions at the Power Burst Facility (PBF). Four positions were examined: Experiment Power Reactor Operator, Experiment (EPRO-Ex); Experiment Power Reactor Operator, Plant (EPRO-P); Experiment Power Reactor Operator, Console (EPRO-Co), and Shift Supervisor (SS). A complete position task listing and core of tasks defined in terms of (a) level of difficulty to perform, (b) severity of consequence if performed improperly, and (c) associated error probability were identified by each position. The systems, academic, and administrative knowledge needed by job incumbents to perform each task was noted. Strategies for teaching the knowledge associated with these tasks are presented

  15. Analysis of Foreign Area Officer (FAO) Requirements

    Science.gov (United States)

    2007-02-01

    East jArabic (MS) Attache Atache NORTHCOM C~anada, Ottawa Ontario ALUSNA 10-6 jAn jFrech Afttche A.ttache N0RTHCOM IMaesc ALUSNA 0-8 S Amyerica...GOG jArabic [Pal-miI/sales Total billets: 15 58 UNCLASSIFIED The Naval Component Commands identified these unconstrained FAQ billets. 58 UNCLASSIFIED

  16. Navy Distributed Virtual Library Requirements Analysis.

    Science.gov (United States)

    1995-12-01

    Josie McCrary asajam01@asnmail.asc.edu Issues In Science and Technology Librarianship ♦ Provides short substantial articles on timely and important...topics in science and technology librarianship as well as conference and workshop reports and short correspondences. ♦ Send a message to acrlsts...electronic journal encompassing all aspects of aca- demic audiovisual librarianship . Focus includes cataloging, refer- ence, collection development

  17. Requirement analysis for autonomous systems and intelligent ...

    African Journals Online (AJOL)

    First we review innovative control architectures in electric power systems such as Microgrids, Virtual power plants and Cell based systems. We evaluate application of autonomous systems and intelligent agents in each of these control architectures particularly in the context of Denmark's strategic energy plans. The second ...

  18. Future Home Network Requirements

    DEFF Research Database (Denmark)

    Charbonnier, Benoit; Wessing, Henrik; Lannoo, Bart

    This paper presents the requirements for future Home Area Networks (HAN). Firstly, we discuss the applications and services as well as their requirements. Then, usage scenarios are devised to establish a first specification for the HAN. The main requirements are an increased bandwidth (towards 1...

  19. User Requirements for Wireless

    DEFF Research Database (Denmark)

    in the elicitation process. Cases and user requirement elements discussed in the book include: User requirements elicitation processes for children, construction workers, and farmers User requirements for personalized services of a broadcast company Variations in user involvement Practical elements of user...

  20. Requirements model generation to support requirements elicitation: The Secure Tropos experience

    NARCIS (Netherlands)

    Kiyavitskaya, N.; Zannone, N.

    2008-01-01

    In recent years several efforts have been devoted by researchers in the Requirements Engineering community to the development of methodologies for supporting designers during requirements elicitation, modeling, and analysis. However, these methodologies often lack tool support to facilitate their

  1. TRANSPORTATION SYSTEM REQUIREMENTS DOCUMENT

    International Nuclear Information System (INIS)

    2004-01-01

    This document establishes the Transportation system requirements for the U.S. Department of Energy's (DOE's) Civilian Radioactive Waste Management System (CRWMS). These requirements are derived from the Civilian Radioactive Waste Management System Requirements Document (CRD). The Transportation System Requirements Document (TSRD) was developed in accordance with LP-3.1Q-OCRWM, Preparation, Review, and Approval of Office of National Transportation Level-2 Baseline Requirements. As illustrated in Figure 1, the TSRD forms a part of the DOE Office of Civilian Radioactive Waste Management (OCRWM) Technical Baseline

  2. Rapid quality assurance with Requirements Smells

    OpenAIRE

    Femmer, H.; Fernández, D. Méndez; Wagner, S.; Eder, S.

    2016-01-01

    Bad requirements quality can cause expensive consequences during the software development lifecycle, especially if iterations are long and feedback comes late. %-- the faster a problem is found, the cheaper it is to fix. This makes explicit the need of a lightweight detection mechanism of requirements quality violations. We aim at a light-weight static requirements analysis approach that allows for rapid checks immediately when requirements are written down. We transfer the concept of code sm...

  3. Transportation System Requirements Document

    International Nuclear Information System (INIS)

    1993-09-01

    This Transportation System Requirements Document (Trans-SRD) describes the functions to be performed by and the technical requirements for the Transportation System to transport spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from Purchaser and Producer sites to a Civilian Radioactive Waste Management System (CRWMS) site, and between CRWMS sites. The purpose of this document is to define the system-level requirements for Transportation consistent with the CRWMS Requirement Document (CRD). These requirements include design and operations requirements to the extent they impact on the development of the physical segments of Transportation. The document also presents an overall description of Transportation, its functions, its segments, and the requirements allocated to the segments and the system-level interfaces with Transportation. The interface identification and description are published in the CRWMS Interface Specification

  4. Physical system requirements - Accept waste

    International Nuclear Information System (INIS)

    1992-08-01

    The Nuclear Waste Policy Act (NWPA) assigned to the Department of Energy (DOE) the responsibility for managing the disposal of spent nuclear fuel and high-level radioactive waste and established the Office of Civilian Radioactive Waste Management (OCRWM) for that purpose. The Secretary of Energy, in his November 1989 report to Congress (DOE/RW-0247), announced new initiatives for the conduct of the Civilian Radioactive Waste Management (CRWM) program. One of these initiatives was to establish improved management structure and procedures. In response, OCRWM performed a management study and the OCRWM Director subsequently issued the Management Systems improvement Strategy (MSIS) on August 10, 1990, calling for a rigorous implementation of systems engineering principles with a special emphasis on functional analysis. The functional analysis approach establishes a framework for integrating the program management efforts with the technical requirements analysis into a single, unified, and consistent program. This approach recognizes that just as the facilities and equipment comprising the physical waste management system must perform certain functions, so must certain programmatic and management functions be performed within the program in order to successfully bring the physical system into being. Thus, a comprehensive functional analysis effort has been undertaken which is intended to: Identify the functions that must be performed to fulfill the waste disposal mission; Identify the corresponding requirements imposed on each of the functions; and Identify the conceptual architecture that will be used to satisfy the requirements. The principal purpose of this requirements document is to present the results that were obtained from the conduct of a functional analysis effort for the Accept Waste mission

  5. ASCR Science Network Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Dart, Eli; Tierney, Brian

    2009-08-24

    The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the US Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In April 2009 ESnet and the Office of Advanced Scientific Computing Research (ASCR), of the DOE Office of Science, organized a workshop to characterize the networking requirements of the programs funded by ASCR. The ASCR facilities anticipate significant increases in wide area bandwidth utilization, driven largely by the increased capabilities of computational resources and the wide scope of collaboration that is a hallmark of modern science. Many scientists move data sets between facilities for analysis, and in some cases (for example the Earth System Grid and the Open Science Grid), data distribution is an essential component of the use of ASCR facilities by scientists. Due to the projected growth in wide area data transfer needs, the ASCR supercomputer centers all expect to deploy and use 100 Gigabit per second networking technology for wide area connectivity as soon as that deployment is financially feasible. In addition to the network connectivity that ESnet provides, the ESnet Collaboration Services (ECS) are critical to several science communities. ESnet identity and trust services, such as the DOEGrids certificate authority, are widely used both by the supercomputer centers and by collaborations such as Open Science Grid (OSG) and the Earth System Grid (ESG). Ease of use is a key determinant of the scientific utility of network-based services. Therefore, a key enabling aspect for scientists beneficial use of high

  6. Non-functional Avionics Requirements

    Science.gov (United States)

    Paulitsch, Michael; Ruess, Harald; Sorea, Maria

    Embedded systems in aerospace become more and more integrated in order to reduce weight, volume/size, and power of hardware for more fuel-effi ciency. Such integration tendencies change architectural approaches of system ar chi tec tures, which subsequently change non-functional requirements for plat forms. This paper provides some insight into state-of-the-practice of non-func tional requirements for developing ultra-critical embedded systems in the aero space industry, including recent changes and trends. In particular, formal requi re ment capture and formal analysis of non-functional requirements of avionic systems - including hard-real time, fault-tolerance, reliability, and per for mance - are exemplified by means of recent developments in SAL and HiLiTE.

  7. Environmental Requirements Management

    Energy Technology Data Exchange (ETDEWEB)

    Cusack, Laura J.; Bramson, Jeffrey E.; Archuleta, Jose A.; Frey, Jeffrey A.

    2015-01-08

    CH2M HILL Plateau Remediation Company (CH2M HILL) is the U.S. Department of Energy (DOE) prime contractor responsible for the environmental cleanup of the Hanford Site Central Plateau. As part of this responsibility, the CH2M HILL is faced with the task of complying with thousands of environmental requirements which originate from over 200 federal, state, and local laws and regulations, DOE Orders, waste management and effluent discharge permits, Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) response and Resource Conservation and Recovery Act (RCRA) corrective action documents, and official regulatory agency correspondence. The challenge is to manage this vast number of requirements to ensure they are appropriately and effectively integrated into CH2M HILL operations. Ensuring compliance with a large number of environmental requirements relies on an organization’s ability to identify, evaluate, communicate, and verify those requirements. To ensure that compliance is maintained, all changes need to be tracked. The CH2M HILL identified that the existing system used to manage environmental requirements was difficult to maintain and that improvements should be made to increase functionality. CH2M HILL established an environmental requirements management procedure and tools to assure that all environmental requirements are effectively and efficiently managed. Having a complete and accurate set of environmental requirements applicable to CH2M HILL operations will promote a more efficient approach to: • Communicating requirements • Planning work • Maintaining work controls • Maintaining compliance

  8. Requirements for Ion Sources

    International Nuclear Information System (INIS)

    Scrivens, R

    2013-01-01

    Ion sources produce beams for a large variety of different physical experiments, industrial processes and medical applications. In order to characterize the beam delivered by them, a list of requirements is necessary. In this chapter the list of principal requirements is specified and definitions for them are given. (author)

  9. Entrepreneurial learning requires action

    DEFF Research Database (Denmark)

    Brink, Tove; Madsen, Svend Ole

    2014-01-01

    that is enhanced by essential large-scale industry players and other SME managers are required to create action and value in learning. An open-mindedness to new learning approaches by SME managers and an open-mindedness to multi- and cross-disciplinary collaboration with SME managers by facilitators is required....

  10. Writing testable software requirements

    Energy Technology Data Exchange (ETDEWEB)

    Knirk, D. [Sandia National Labs., Albuquerque, NM (United States)

    1997-11-01

    This tutorial identifies common problems in analyzing requirements in the problem and constructing a written specification of what the software is to do. It deals with two main problem areas: identifying and describing problem requirements, and analyzing and describing behavior specifications.

  11. State-of-the-art Analysis on the Knowledge and Skills Gaps on the Topic of Industry 4.0 and the Requirements for Work-based Learning in Romania

    Directory of Open Access Journals (Sweden)

    Liviu MOLDOVAN

    2018-06-01

    Full Text Available This paper reports the state-of-the-art analysis on the knowledge and skills gaps on the topic of Industry 4.0 and the requirements for work-based learning (WBL consists of the results from a large-scale survey conducted among two target groups: manufacturing small and mediumsized enterprises (SMEs and vocational education and training (VET providers/trainers/consultants in Romania and cross-sectional analysis of the viewpoints of manufacturing SMEs representatives vs. VET providers. It is part of the Erasmus+ project “Work-based training approach in the field of Industry 4.0 for competitive European Industry”- iNduce 4.0. Based on the results from the researches carried out in Romania are defined the key points concerning the elaboration of the iNduce 4.0 training course and the iNduce 4.0 Practical methodology for WBL. It foresees the awareness of the Industry 4.0 topic, the training modules developed, the needed skills and the proportion of theory and practice.

  12. Analysis of proposed eco-design requirements for boilers and water heaters. Paper within the framwork of the ''Material Efficiency and Resource Conservation'' (MaRess) Project - Task 14

    Energy Technology Data Exchange (ETDEWEB)

    Barthel, Klaus; Franke, Moritz [Wuppertal Institute for Climate, Environment and Energy, Wuppertal (Germany)

    2009-12-15

    Institute to analyse the spreadsheets and to carry out calculations for selected products. The selection contains environmental-friendly boilers and water heaters which fulfil the award criteria of the ''Blue Angel'', the German national voluntary environmental label, which sets environmentally related product obligations to manufacturers. Since the required input data of the spreadsheet is far more comprehensive than the selected award criteria of the ''Blue Angel'', Wuppertal Institute has chosen specific products that are sold in the markets and fulfil the award criteria of the ''Blue Angel'' in order to perform the calculations. The results of the calculation and the analysis of the Ecoboiler model reveal enormous differences concerning the energy label on boilers depending on the heating technology used. While a calculated electric brine/water heat pump obtains very good results, calculated low temperature boilers perform rather bad. Condensing boilers are in between (cf. chapter 9). Following the European Commission's suggestions for the implementation of the ecodesign requirements in 2011 resp. in 2013, a shift in market shares is expected depending on the heating technologies used. The enforced requirements on electric lowtemperature boilers and condensing boilers will inter alia lead to some extent to the prohibition of many units which are available today. First of all low-temperature boilers will be in the border area of expiring energy label classes in 2011 and subsequently many condensing boilers will not be allowed to be sold in the internal market from 2013 onwards. Nevertheless, low-temperature boilers will not be completely squeezed out of the market since it will still be possible to sell heat pump or solar assisted lowtemperature boilers. The implementation of the ecodesign requirements will therefore lead to changes in the heating market in Germany. The share of the affected low

  13. Analysis

    DEFF Research Database (Denmark)

    Mathiesen, Brian Vad; Liu, Wen; Zhang, Xiliang

    2014-01-01

    three major technological changes: energy savings on the demand side, efficiency improvements in energy production, and the replacement of fossil fuels by various sources of renewable energy. Consequently, the analysis of these systems must include strategies for integrating renewable sources...

  14. Requirements in engineering projects

    CERN Document Server

    Fernandes, João M

    2016-01-01

    This book focuses on various topics related to engineering and management of requirements, in particular elicitation, negotiation, prioritisation, and documentation (whether with natural languages or with graphical models). The book provides methods and techniques that help to characterise, in a systematic manner, the requirements of the intended engineering system.  It was written with the goal of being adopted as the main text for courses on requirements engineering, or as a strong reference to the topics of requirements in courses with a broader scope. It can also be used in vocational courses, for professionals interested in the software and information systems domain.   Readers who have finished this book will be able to: - establish and plan a requirements engineering process within the development of complex engineering systems; - define and identify the types of relevant requirements in engineering projects; - choose and apply the most appropriate techniques to elicit the requirements of a giv...

  15. Requirements Engineering for Software Integrity and Safety

    Science.gov (United States)

    Leveson, Nancy G.

    2002-01-01

    Requirements flaws are the most common cause of errors and software-related accidents in operational software. Most aerospace firms list requirements as one of their most important outstanding software development problems and all of the recent, NASA spacecraft losses related to software (including the highly publicized Mars Program failures) can be traced to requirements flaws. In light of these facts, it is surprising that relatively little research is devoted to requirements in contrast with other software engineering topics. The research proposed built on our previous work. including both criteria for determining whether a requirements specification is acceptably complete and a new approach to structuring system specifications called Intent Specifications. This grant was to fund basic research on how these ideas could be extended to leverage innovative approaches to the problems of (1) reducing the impact of changing requirements, (2) finding requirements specification flaws early through formal and informal analysis, and (3) avoiding common flaws entirely through appropriate requirements specification language design.

  16. THE EQUALITY PRINCIPLE REQUIREMENTS

    Directory of Open Access Journals (Sweden)

    CLAUDIA ANDRIŢOI

    2013-05-01

    Full Text Available The problem premises and the objectives followed: the idea of inserting the equality principle between the freedom and the justice principles is manifested in positive law in two stages, as a general idea of all judicial norms and as requirement of the owner of a subjective right of the applicants of an objective law. Equality in face of the law and of public authorities can not involve the idea of standardization, of uniformity, of enlisting of all citizens under the mark of the same judicial regime, regardless of their natural or socio-professional situation. Through the Beijing Platform and the position documents of the European Commission we have defined the integrative approach of equality as representing an active and visible integration of the gender perspective in all sectors and at all levels. The research methods used are: the conceptualist method, the logical method and the intuitive method necessary as means of reasoning in order to argue our demonstration. We have to underline the fact that the system analysis of the research methods of the judicial phenomenon doesn’t agree with “value ranking”, because one value cannot be generalized in rapport to another. At the same time, we must fight against a methodological extremism. The final purpose of this study is represented by the reaching of the perfecting/excellence stage by all individuals through the promotion of equality and freedom. This supposes the fact that the existence of a non-discrimination favourable frame (fairness represents a means and a condition of self-determination, and the state of perfection/excellency is a result of this self-determination, the condition necessary for the obtaining of this nondiscrimination frame for all of us and in conditions of freedom for all individuals, represents the same condition that promotes the state of perfection/excellency. In conclusion we may state the fact that the equality principle represents a true catalyst of the

  17. FAA Financial Requirements

    Science.gov (United States)

    1997-06-04

    In June 1995, the FAA developed a "total requirements" estimate for the period : FY 97-FY 02 to help explain the difficulty of supporting a dynamic, growing : aviation industry under a federal budget picture which projected flat or reduced : funding ...

  18. TWRSview system requirements specification

    International Nuclear Information System (INIS)

    Caldwell, J.A.; Lee, A.K.

    1995-12-01

    This document provides the system requirements specification for the TWRSview software system. The TWRSview software system is being developed to integrate electronic data supporting the development of the TWRS technical baseline

  19. Estimating ISABELLE shielding requirements

    International Nuclear Information System (INIS)

    Stevens, A.J.; Thorndike, A.M.

    1976-01-01

    Estimates were made of the shielding thicknesses required at various points around the ISABELLE ring. Both hadron and muon requirements are considered. Radiation levels at the outside of the shield and at the BNL site boundary are kept at or below 1000 mrem per year and 5 mrem/year respectively. Muon requirements are based on the Wang formula for pion spectra, and the hadron requirements on the hadron cascade program CYLKAZ of Ranft. A muon shield thickness of 77 meters of sand is indicated outside the ring in one area, and hadron shields equivalent to from 2.7 to 5.6 meters in thickness of sand above the ring. The suggested safety allowance would increase these values to 86 meters and 4.0 to 7.2 meters respectively. There are many uncertainties in such estimates, but these last figures are considered to be rather conservative

  20. A novel genetic technique in Plasmodium berghei allows liver stage analysis of genes required for mosquito stage development and demonstrates that de novo heme synthesis is essential for liver stage development in the malaria parasite.

    Directory of Open Access Journals (Sweden)

    Upeksha L Rathnapala

    2017-06-01

    Full Text Available The combination of drug resistance, lack of an effective vaccine, and ongoing conflict and poverty means that malaria remains a major global health crisis. Understanding metabolic pathways at all parasite life stages is important in prioritising and targeting novel anti-parasitic compounds. The unusual heme synthesis pathway of the rodent malaria parasite, Plasmodium berghei, requires eight enzymes distributed across the mitochondrion, apicoplast and cytoplasm. Deletion of the ferrochelatase (FC gene, the final enzyme in the pathway, confirms that heme synthesis is not essential in the red blood cell stages of the life cycle but is required to complete oocyst development in mosquitoes. The lethality of FC deletions in the mosquito stage makes it difficult to study the impact of these mutations in the subsequent liver stage. To overcome this, we combined locus-specific fluorophore expression with a genetic complementation approach to generate viable, heterozygous oocysts able to produce a mix of FC expressing and FC deficient sporozoites. These sporozoites show normal motility and can invade liver cells, where FC deficient parasites can be distinguished by fluorescence and phenotyped. Parasites lacking FC exhibit a severe growth defect within liver cells, with development failure detectable in the early to mid stages of liver development in vitro. FC deficient parasites could not complete liver stage development in vitro nor infect naïve mice, confirming liver stage arrest. These results validate the heme pathway as a potential target for prophylactic drugs targeting liver stage parasites. In addition, we demonstrate that our simple genetic approach can extend the phenotyping window beyond the insect stages, opening considerable scope for straightforward reverse genetic analysis of genes that are dispensable in blood stages but essential for completing mosquito development.

  1. A novel genetic technique in Plasmodium berghei allows liver stage analysis of genes required for mosquito stage development and demonstrates that de novo heme synthesis is essential for liver stage development in the malaria parasite.

    Science.gov (United States)

    Rathnapala, Upeksha L; Goodman, Christopher D; McFadden, Geoffrey I

    2017-06-01

    The combination of drug resistance, lack of an effective vaccine, and ongoing conflict and poverty means that malaria remains a major global health crisis. Understanding metabolic pathways at all parasite life stages is important in prioritising and targeting novel anti-parasitic compounds. The unusual heme synthesis pathway of the rodent malaria parasite, Plasmodium berghei, requires eight enzymes distributed across the mitochondrion, apicoplast and cytoplasm. Deletion of the ferrochelatase (FC) gene, the final enzyme in the pathway, confirms that heme synthesis is not essential in the red blood cell stages of the life cycle but is required to complete oocyst development in mosquitoes. The lethality of FC deletions in the mosquito stage makes it difficult to study the impact of these mutations in the subsequent liver stage. To overcome this, we combined locus-specific fluorophore expression with a genetic complementation approach to generate viable, heterozygous oocysts able to produce a mix of FC expressing and FC deficient sporozoites. These sporozoites show normal motility and can invade liver cells, where FC deficient parasites can be distinguished by fluorescence and phenotyped. Parasites lacking FC exhibit a severe growth defect within liver cells, with development failure detectable in the early to mid stages of liver development in vitro. FC deficient parasites could not complete liver stage development in vitro nor infect naïve mice, confirming liver stage arrest. These results validate the heme pathway as a potential target for prophylactic drugs targeting liver stage parasites. In addition, we demonstrate that our simple genetic approach can extend the phenotyping window beyond the insect stages, opening considerable scope for straightforward reverse genetic analysis of genes that are dispensable in blood stages but essential for completing mosquito development.

  2. Requirements Engineering and Design Technology Report

    National Research Council Canada - National Science Library

    Ganska, Ralph

    1995-01-01

    This report reviews the STSC's recommendations for the selection and usage of software engineering products aimed at the requirements analysis and high-level design portions of the software lifecycle...

  3. Utility requirements for fusion

    International Nuclear Information System (INIS)

    Vondrasek, R.J.

    1982-02-01

    This report describes work done and results obtained during performance of Task 1 of a study of Utility Requirements and Criteria for Fusion Options. The work consisted of developing a list of utility requirements for fusion optics containing definition of the requirements and showing their relative importance to the utility industry. The project team members developed a preliminary list which was refined by discussions and literature searches. The refined list was recast as a questionnaire which was sent to a substantial portion of the utility industry in this country. Forty-three questionnaire recipients responded including thirty-two utilities. A workshop was held to develop a revised requirements list using the survey responses as a major input. The list prepared by the workshop was further refined by a panel consisting of vice presidents of the three project team firms. The results of the study indicate that in addition to considering the cost of energy for a power plant, utilities consider twenty-three other requirements. Four of the requirements were judged to be vital to plant acceptability: Plant Capital Cost, Financial Liability, Plant Safety and Licensability

  4. Integrating semi-formal and formal requirements

    NARCIS (Netherlands)

    Wieringa, Roelf J.; Olivé, Antoni; Dubois, Eric; Pastor, Joan Antoni; Huyts, Sander

    1997-01-01

    In this paper, we report on the integration of informal, semiformal and formal requirements specification techniques. We present a framework for requirements specification called TRADE, within which several well-known semiformal specification techniques are placed. TRADE is based on an analysis of

  5. 15 CFR 806.4 - Response required.

    Science.gov (United States)

    2010-01-01

    ... ECONOMIC ANALYSIS, DEPARTMENT OF COMMERCE DIRECT INVESTMENT SURVEYS § 806.4 Response required. Reports, as... certifying in writing to the fact that the person has no direct investments within the purview of the Act or... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Response required. 806.4 Section 806.4...

  6. 15 CFR 806.3 - Reporting requirements.

    Science.gov (United States)

    2010-01-01

    ... be required from among others, U.S. persons which have direct investment abroad, U.S. persons in which foreign persons have direct investment, U.S. intermediaries, and U.S. persons which assist or... OF ECONOMIC ANALYSIS, DEPARTMENT OF COMMERCE DIRECT INVESTMENT SURVEYS § 806.3 Reporting requirements...

  7. Fiscal year 1999 waste information requirements document

    International Nuclear Information System (INIS)

    Adams, M.R.

    1998-01-01

    The Waste Information Requirements Document (WIRD) has the following purposes: To describe the overall drivers that require characterization information and to document their source; To define how characterization is going to satisfy the drivers, close issues, and measure and report progress; and To describe deliverables and acceptance criteria for characterization. Characterization information is required to maintain regulatory compliance, perform operations and maintenance, resolve safety issues, and prepare for disposal of waste. Commitments addressing these requirements are derived from the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement; the Recommendation 93-5 Implementation Plan (DOE-RL 1996a) to the Defense Nuclear Facilities Safety Board (DNFSB); and other requirement sources listed in Section 2.0. The Waste Information Requirements Document replaces the tank waste analysis plans and the tank characterization plan previously required by the Tri-Party Agreement, Milestone M-44-01 and M-44-02 series

  8. NP Science Network Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Dart, Eli [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Rotman, Lauren [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Tierney, Brian [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

    2011-08-26

    The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the U.S. Department of Energy (DOE) Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. To support SC programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In August 2011, ESnet and the Office of Nuclear Physics (NP), of the DOE SC, organized a workshop to characterize the networking requirements of the programs funded by NP. The requirements identified at the workshop are summarized in the Findings section, and are described in more detail in the body of the report.

  9. Quantifying requirements volatility effects

    NARCIS (Netherlands)

    Kulk, G.P.; Verhoef, C.

    2008-01-01

    In an organization operating in the bancassurance sector we identified a low-risk IT subportfolio of 84 IT projects comprising together 16,500 function points, each project varying in size and duration, for which we were able to quantify its requirements volatility. This representative portfolio

  10. Requirements for Xenon International

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, James C.; Ely, James H.

    2013-09-26

    This document defines the requirements for the new Xenon International radioxenon system. The output of this project will be a Pacific Northwest National Laboratory (PNNL) developed prototype and a manufacturer-developed production prototype. The two prototypes are intended to be as close to matching as possible; this will be facilitated by overlapping development cycles and open communication between PNNL and the manufacturer.

  11. Requirements for Xenon International

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, James C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ely, James H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Haas, Derek A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Harper, Warren W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Heimbigner, Tom R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hubbard, Charles W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Humble, Paul H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Madison, Jill C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Morris, Scott J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Panisko, Mark E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ripplinger, Mike D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stewart, Timothy L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-12-30

    This document defines the requirements for the new Xenon International radioxenon system. The output of this project will be a Pacific Northwest National Laboratory (PNNL) developed prototype and a manufacturer-developed production prototype. The two prototypes are intended to be as close to matching as possible; this will be facilitated by overlapping development cycles and open communication between PNNL and the manufacturer.

  12. Requirements for enrichment tools

    NARCIS (Netherlands)

    Boer, A.; Winkels, R.; Trompper, M.

    2016-01-01

    This report gives a high level overview of requirements for Enrichment tools in the Openlaws.eu project. Openlaws.eu aims to initiate a platform and develop a vision for Big Open Legal Data (BOLD): an open framework for legislation, case law, and legal literature from across Europe.

  13. Ongoing experiments: diagnostics requirements

    International Nuclear Information System (INIS)

    Dickerman, C.E.

    1976-01-01

    The paper reviews the fuel motion diagnostics needs for ongoing LMFBR safety experiments over approximately the next five years, with the discussion centered on TREAT. Brief comments on the direction in which clad motion diagnostics requirements are expected to develop are also presented

  14. Human Systems Integration Requirements

    Science.gov (United States)

    2009-09-01

    52 Stratofortress, C/ KC -135 Stratotanker, E-3 Sentry and contractor logistics support aircraft; as well as a substantial jet engine inventory...www.hqda.army.mil/ teo /Sutability%20Terms%20MOA%20Oct%2005.pdf q. ISO 9241-11, Ergonomic requirements for office work with visual display terminals (VDTs

  15. Spent fuel storage requirements

    International Nuclear Information System (INIS)

    Fletcher, J.

    1982-06-01

    Spent fuel storage requirements, as projected through the year 2000 for U.S. LWRs, were calculated using information supplied by the utilities reflecting plant status as of December 31, 1981. Projections through the year 2000 combined fuel discharge projections of the utilities with the assumed discharges of typical reactors required to meet the nuclear capacity of 165 GWe projected by the Energy Information Administration (EIA) for the year 2000. Three cases were developed and are summarized. A reference case, or maximum at-reactor (AR) capacity case, assumes that all reactor storage pools are increased to their maximum capacities as estimated by the utilities for spent fuel storage utilizing currently licensed technologies. The reference case assumes no transshipments between pools except as currently licensed by the Nuclear Regulatory Commission (NRC). This case identifies an initial requirement for 13 MTU of additional storage in 1984, and a cumulative requirement for 14,490 MTU additional storage in the year 2000. The reference case is bounded by two alternative cases. One, a current capacity case, assumes that only those pool storage capacity increases currently planned by the operating utilities will occur. The second, or maximum capacity with transshipment case, assumes maximum development of pool storage capacity as described above and also assumes no constraints on transshipment of spent fuel among pools of reactors of like type (BWR, PWR) within a given utility. In all cases, a full core discharge capability (full core reserve or FCR) is assumed to be maintained for each reactor, except that only one FCR is maintained when two reactors share a common pool. For the current AR capacity case the indicated storage requirements in the year 2000 are indicated to be 18,190 MTU; for the maximum capacity with transshipment case they are 11,320 MTU

  16. Monitored Retrievable Storage System Requirements Document

    International Nuclear Information System (INIS)

    1994-03-01

    This Monitored Retrievable Storage System Requirements Document (MRS-SRD) describes the functions to be performed and technical requirements for a Monitored Retrievable Storage (MRS) facility subelement and the On-Site Transfer and Storage (OSTS) subelement. The MRS facility subelement provides for temporary storage, at a Civilian Radioactive Waste Management System (CRWMS) operated site, of spent nuclear fuel (SNF) contained in an NRC-approved Multi-Purpose Canister (MPC) storage mode, or other NRC-approved storage modes. The OSTS subelement provides for transfer and storage, at Purchaser sites, of spent nuclear fuel (SNF) contained in MPCs. Both the MRS facility subelement and the OSTS subelement are in support of the CRWMS. The purpose of the MRS-SRD is to define the top-level requirements for the development of the MRS facility and the OSTS. These requirements include design, operation, and decommissioning requirements to the extent they impact on the physical development of the MRS facility and the OSTS. The document also presents an overall description of the MRS facility and the OSTS, their functions (derived by extending the functional analysis documented by the Physical System Requirements (PSR) Store Waste Document), their segments, and the requirements allocated to the segments. In addition, the top-level interface requirements of the MRS facility and the OSTS are included. As such, the MRS-SRD provides the technical baseline for the MRS Safety Analysis Report (SAR) design and the OSTS Safety Analysis Report design

  17. Analysis of energy requirement in the irrigation sector and its application in groundwater over-pumping control at a local scale - A case study in the North China Plain

    Science.gov (United States)

    Wang, L.; Kinzelbach, W.; Yao, H.; Hagmann, A.; Li, N.; Steiner, J. F.

    2017-12-01

    The North China Plain is one of the most important agricultural regions which relies heavily on groundwater pumping for irrigation powered by electric energy. This region is also facing a severe problem of groundwater over-pumping. Stopping groundwater depletion by controlling pumping for irrigation may harm the agricultural production and affect the interests of the electricity utility who is a direct participant in the irrigation management. Water-saving infrastructures such as sprinklers can be effective means for water conservation but are often difficult to implement due to farmers' unwillingness to pay for the additional electricity consumption. Understanding this food-energy-water nexus is fundamental to implement effective and practical strategies for groundwater over-pumping control in the North China Plain. However, this understanding can be obscured by the missing groundwater pumping monitoring and a lack of access to specific energy data for irrigation use as well as the field observations of pump efficiency. Taking the example of a typical agricultural county (Guantao) in the North China Plain with irrigation pumps generally powered by electricity, this study is focused on the analysis of the energy requirement in the irrigation sector and its application in developing strategies for groundwater over-pumping control at the county scale. 1) Field measurements from pumping tests are used to adjust the pumps' theoretical characteristics. A simple empirical equation is derived to estimate the energy use rate for irrigation given the depth of the groundwater table. Field measurements show that pump efficiency is around 30% in the tested region. 2) We hypothesize that the inter-annual variability of rural energy consumption is caused by the randomness in annual precipitation. This assumption is examined and then applied to separate the energy consumption for irrigation from the total rural energy consumption. 3) Based on the groundwater pumping rate

  18. Next Generation Microbiology Requirements

    Science.gov (United States)

    Ott, C. M.; Oubre, C. M.; Elliott, T. F.; Castro, V. A.; Pierson, D. L.

    2012-01-01

    As humans continue to explore deep into space, microorganisms will travel with them. The primary means to mitigate the risk of infectious disease are a combination of prudent spacecraft design and rigorous operational controls. The effectiveness of these methods are evaluated by microbiological monitoring of spacecraft, food, water, and the crew that is performed preflight, in-flight, and post-flight. Current NASA requirements associated with microbiological monitoring are based on culture-based methodology where microorganisms are grown on a semi-solid growth medium and enumerated. Subsequent identification of the organisms requires specialized labor and large equipment, which historically has been performed on Earth. Requirements that rely strictly on culture-based units limit the use of non-culture based monitoring technology. Specifically, the culture-based "measurement criteria" are Colony Forming Units (CFU, representing the growth of one microorganism at a single location on the agar medium) per a given volume, area, or sample size. As the CFU unit by definition is culture-based, these requirements limit alternative technologies for spaceflight applications. As spaceflight missions such as those to Mars extend further into space, culture-based technology will become difficult to implement due to the (a) limited shelf life of the culture media, (b) mass/volume necessary to carry these consumables, and (c) problems associated with the production of biohazardous material in the habitable volume of the spacecraft. In addition, an extensive amount of new knowledge has been obtained during the Space Shuttle, NASA-Mir, and International Space Station Programs, which gave direction for new or modified microbial control requirements for vehicle design and mission operations. The goal of this task is to develop and recommend a new set of requirements for vehicle design and mission operations, including microbiological monitoring, based upon "lessons learned" and new

  19. Optical CDMA components requirements

    Science.gov (United States)

    Chan, James K.

    1998-08-01

    Optical CDMA is a complementary multiple access technology to WDMA. Optical CDMA potentially provides a large number of virtual optical channels for IXC, LEC and CLEC or supports a large number of high-speed users in LAN. In a network, it provides asynchronous, multi-rate, multi-user communication with network scalability, re-configurability (bandwidth on demand), and network security (provided by inherent CDMA coding). However, optical CDMA technology is less mature in comparison to WDMA. The components requirements are also different from WDMA. We have demonstrated a video transport/switching system over a distance of 40 Km using discrete optical components in our laboratory. We are currently pursuing PIC implementation. In this paper, we will describe the optical CDMA concept/features, the demonstration system, and the requirements of some critical optical components such as broadband optical source, broadband optical amplifier, spectral spreading/de- spreading, and fixed/programmable mask.

  20. Users' requirements for IFMIF

    International Nuclear Information System (INIS)

    Noda, K.; Jitsukawa, S.; Ehrlich, K.; Moeslang, A.

    1998-01-01

    The International Fusion Materials Irradiation Facility (IFMIF) is a high energy neutron irradiation facility which generates an intense neutron flux with D-Li stripping reactions for fusion materials testing. The role of IFMIF is (1) development of various fusion reactor materials, (2) determination of design-relevant engineering databases for the DEMO fusion reactor, (3) calibration and validation of data generated from fission reactor irradiations and the other simulation experiments, etc. The conceptual design activity (CDA) of IFMIF was initiated in February 1995 as an IEA collaborative activity to complete a reference conceptual design of IFMIF in December 1996. Users' requirements for the conceptual design of IFMIF were developed for materials to be tested, types of experiments, small specimen test technology and irradiation conditions. Furthermore, the neutron irradiation field characteristics (spectrum, flux/volume, etc.) of IFMIF were evaluated for the conceptual design parameters and were shown to meet the essential requirements of the users. (orig.)