Wind Tunnel Testing on Crosswind Aerodynamic Forces Acting on Railway Vehicles

Science.gov (United States)

Kwon, Hyeok-Bin; Nam, Seong-Won; You, Won-Hee

This study is devoted to measure the aerodynamic forces acting on two railway trains, one of which is a high-speed train at 300km/h maximum operation speed, and the other is a conventional train at the operating speed 100km/h. The three-dimensional train shapes have been modeled as detailed as possible including the inter-car, the upper cavity for pantograph, and the bogie systems. The aerodynamic forces on each vehicle of the trains have been measured in the subsonic wind tunnel with 4m×3m test section of Korea Aerospace Research Institute at Daejeon, Korea. The aerodynamic forces and moments of the train models have been plotted for various yaw angles and the characteristics of the aerodynamic coefficients has been discussed relating to the experimental conditions.

Simulation of airflow and aerodynamic forces acting on a commercial turbine ventilator

International Nuclear Information System (INIS)

Farahani, A.S.; Nor Mariah Adam; Khairol Anuar

2009-01-01

Full text: This study is concerned with performing simulation of airflow using Computational Fluid Dynamics (CFD) technique code name FLUENT so as to visualize the flow behavior around and within turbine ventilator in addition to determining the aerodynamic forces acting on turbine ventilator during operation and comparing the simulated results to the wind tunnel experiment. To achieve this, Realizable k-ε and RSM turbulence models are used by taking advantage of moving mesh method to simulate the rotation of turbine ventilator and the consequent results are obtained through the sequential process which ensures accuracy of the computations. The results demonstrated that, the RSM turbulence model shows the best performance on flow visualization and predicting the aerodynamic forces acting on a turbine ventilator. Results from this work would lead us to a noticeable increase in efficiency of future turbine ventilator by enhancing the shape of inner vanes, and redesign them using CFD technique. (author)

On the absorbing force of magnetic fields acting on magnetic particle under magnetic particle examination

International Nuclear Information System (INIS)

Maeda, N.

1988-01-01

During the magnetic particle examination, magnetic particles near defects are deposited by an absorbing force of magnetic fields acting on the magnetic particles. Therefore, a quantitative determination of this absorbing force is a theoretical and experimental basis for solving various problems associated with magnetic particle examinations. The absorbing force is formulated based on a magnetic dipole model, and a measuring method of the absorbing force using magnetic fields formed around linear current is proposed. Measurements according to this method produced appropriate results, verifying the validation of the concept and the measuring method

Unsteady analysis on the instantaneous forces and moment arms acting on a novel Savonius-style wind turbine

International Nuclear Information System (INIS)

Roy, Sukanta; Ducoin, Antoine

2016-01-01

Highlights: • Two-dimensional unsteady simulations on a novel Savonius-style wind turbine. • Instantaneous behavior of drag and lift coefficients, and corresponding moment arms. • Effect of tip speed ratio on the instantaneous force coefficients and moments arms. • Effect of force coefficients and moment arms on the instantaneous moment and power. • Analysis of power and moment coefficients at different tip speed ratios. - Abstract: This paper aims to present a transient analysis on the forces acting on a novel two-bladed Savonius-style wind turbine. Two-dimensional unsteady Reynolds Averaged Navier Stokes equations are solved using shear stress transport k–ω turbulence model at a Reynolds number of 1.23 × 10"5. The instantaneous longitudinal drag and lateral lift forces acting on each of the blades and their acting points are calculated. The corresponding moment arms responsible for the torque generation are obtained. Further, the effect of tip speed ratio on the force coefficients, moment arms and overall turbine performances are observed. Throughout the paper, the obtained results for the new design are discussed with reference to conventional semi-circular design of Savonius turbines. A significant performance improvement is achieved with the new design due to its increased lift and moment arm contribution as compared to the conventional design. More interestingly, the present study sets a platform for future aerodynamic research and improvements for Savonius-style wind turbines.

The flow field acting on the fluttering profile, kinematics, forces and total moment

Czech Academy of Sciences Publication Activity Database

Kozánek, Jan; Vlček, Václav; Zolotarev, Igor

2013-01-01

Roč. 13, č. 7 (2013), s. 1-7 ISSN 0219-4554 R&D Projects: GA ČR GA101/09/1522 Institutional support: RVO:61388998 Keywords : fluttering profile * interferometry visualization * acting forces and moment Subject RIV: JU - Aeronautics, Aerodynamics, Aircrafts Impact factor: 1.059, year: 2013

Torquing an upper central incisor with aligners--acting forces and biomechanical principles.

Science.gov (United States)

Hahn, Wolfram; Zapf, Antonia; Dathe, Henning; Fialka-Fricke, Julia; Fricke-Zech, Susanne; Gruber, Rudolf; Kubein-Meesenburg, Dietmar; Sadat-Khonsari, Reza

2010-12-01

The forces delivered by aligners during torquing have still not been investigated. The purpose of this study was to measure the forces delivered to an upper central incisor during torquing with three different materials of the same thickness, and to describe the biomechanical principles of torquing with aligners. Five identical appliances were manufactured from each of three materials, all with a thickness of 1.0 mm (Ideal Clear®, Erkodur®, and Biolon®). An upper central incisor, as part of the measuring device, was torqued in defined steps in the vestibular and palatal directions with the respective appliance in place. For statistical analysis, the resulting forces, Fx (forces acting in the palatal and facial directions) and Fz (intrusive force as a side-effect) at a displacement of ±0.15 and ±0.8 mm from the tooth at the gingival margin were calculated. The mean Fx forces for ±0.15 mm displacement ranged from -1.89 N [standard deviation (SD) 0.48] to 0.11 N (SD 0.1). The mean Fz forces were between -0.97 N (SD 0.57) and -0.07 N (SD 0.22). The highest intrusive forces were measured during palatal displacement of the measuring tooth. An influence of direction of displacement on the levels of force was observed, especially for Fz at the greater displacement of ±0.8 mm. In relation to the intended amount of root movement during torquing, aligners tend to 'lift up' and therefore no effective force couple can be established for further root control. The force delivery properties are also influenced by the material used and the shape of the tooth.

Magnetic force acting on a magnetic dipole over a superconducting thin film

International Nuclear Information System (INIS)

Wei, J.C.; Chen, J.L.; Horng, L.; Yang, T.J.

1996-01-01

The magnetostatic interaction energy and corresponding magnetic force acting on a magnetic point dipole placed above a type-II thin superconducting film in the mixed state with a single vortex are calculated using electromagnetics coupled with the London theory of superconductivity. If a vortex is trapped by a circular defect of radius b 1, where a is the separation between the dipole and the thin film, the only difference between two results is in the cutoff length, i.e., in the case of a circular defect the only difference in the critical position calculation is the cutoff at radius b rather than at coherence length ξ. The pinning force of a single vortex by a circular defect is also calculated. Further, we investigate the conditions of the vortex creation for various cases (including the first, second, and third vortices) for a free of pinning center in the examining region. It is found that the creation of a new single vortex in the thin film causes an abrupt change in vertical levitation force: the force changed discontinuously. copyright 1996 The American Physical Society

Air Force Personnel Can Improve Compliance With the Berry Amendment and Buy American Act

Science.gov (United States)

2016-02-24

leather, furs,6 apparel , and shoes • FSG 84 – clothing , individual equipment and insignia • FSG 89 – subsistence (food) If these items are purchased...during the audit by completing Buy American Act training and amending standard operating procedures and internal processes to improve compliance with the...Force Personnel Can Improve Compliance With the Berry Amendment and the Buy American Act F E B R U A R Y 2 4 , 2 0 1 6 Report No. DODIG-2016-051

Relationship of Source Selection Methods to Contract Outcomes: an Analysis of Air Force Source Selection

Science.gov (United States)

2015-12-01

some occasions, performance is terminated early; this can occur due to either mutual agreement or a breach of contract by one of the parties (Garrett...Relationship of Source Selection Methods to Contract Outcomes: an Analysis of Air Force Source Selection December 2015 Capt Jacques Lamoureux, USAF...on the contract management process, with special emphasis on the source selection methods of tradeoff and lowest price technically acceptable (LPTA

Calculating Free Energies Using Average Force

Science.gov (United States)

Darve, Eric; Pohorille, Andrew; DeVincenzi, Donald L. (Technical Monitor)

2001-01-01

A new, general formula that connects the derivatives of the free energy along the selected, generalized coordinates of the system with the instantaneous force acting on these coordinates is derived. The instantaneous force is defined as the force acting on the coordinate of interest so that when it is subtracted from the equations of motion the acceleration along this coordinate is zero. The formula applies to simulations in which the selected coordinates are either unconstrained or constrained to fixed values. It is shown that in the latter case the formula reduces to the expression previously derived by den Otter and Briels. If simulations are carried out without constraining the coordinates of interest, the formula leads to a new method for calculating the free energy changes along these coordinates. This method is tested in two examples - rotation around the C-C bond of 1,2-dichloroethane immersed in water and transfer of fluoromethane across the water-hexane interface. The calculated free energies are compared with those obtained by two commonly used methods. One of them relies on determining the probability density function of finding the system at different values of the selected coordinate and the other requires calculating the average force at discrete locations along this coordinate in a series of constrained simulations. The free energies calculated by these three methods are in excellent agreement. The relative advantages of each method are discussed.

Calculation of the force acting on a drop in a nonuniform flow of a current-supporting fluid

International Nuclear Information System (INIS)

Korovin, V.M.

1993-01-01

In the context of wide use of intense electric currents in various technological process, it is of practical interest to investigate the characteristics of the force action of electromagnetic fields on a variety of inclusions - solid particles, drops, gas bubbles - suspended in current-supporting fluids. In the available studies one treats the simplest case, in which the vortical component of the electromagnetic forces, generated by the interaction of the current with the internal magnetic field, is nonvanishing only in small vicinities near these inclusions, and therefore these electromagnetic forces do not generate global motion of the homogeneous current-supporting fluid. In practice, in most cases the vortical component of electromagnetic forces plays a substantial role in the whole operating region of the technological device, and the motion of the current-supporting fluid is created specifically by electromagnetic forces. In the case of a varying electromagnetic field the forces acting on particles are located in the conducting fluid, moving under the field action, were calculated by Korovim (Korovim, V. M., open-quotes The calculation of forces acting on suspended particles during the flow of a conducting fluid in a varying electromagnetic field,close quotes Magn. Gidrodin, No. 1 95-102 (1991)). In the present study the authors generalize the method suggested by Korovin for calculating forces applied to both drops and particles and gas bubbles suspended in the gradient flow of a fluid moving under the action of a constant electromagnetic field. 6 refs

Selective forces and mutational biases drive stop codon usage in the human genome: a comparison with sense codon usage.

Science.gov (United States)

Trotta, Edoardo

2016-05-17

The three stop codons UAA, UAG, and UGA signal the termination of mRNA translation. As a result of a mechanism that is not adequately understood, they are normally used with unequal frequencies. In this work, we showed that selective forces and mutational biases drive stop codon usage in the human genome. We found that, in respect to sense codons, stop codon usage was affected by stronger selective forces but was less influenced by neutral mutational biases. UGA is the most frequent termination codon in human genome. However, UAA was the preferred stop codon in genes with high breadth of expression, high level of expression, AT-rich coding sequences, housekeeping functions, and in gene ontology categories with the largest deviation from expected stop codon usage. Selective forces associated with the breadth and the level of expression favoured AT-rich sequences in the mRNA region including the stop site and its proximal 3'-UTR, but acted with scarce effects on sense codons, generating two regions, upstream and downstream of the stop codon, with strongly different base composition. By favouring low levels of GC-content, selection promoted labile local secondary structures at the stop site and its proximal 3'-UTR. The compositional and structural context favoured by selection was surprisingly emphasized in the class of ribosomal proteins and was consistent with sequence elements that increase the efficiency of translational termination. Stop codons were also heterogeneously distributed among chromosomes by a mechanism that was strongly correlated with the GC-content of coding sequences. In human genome, the nucleotide composition and the thermodynamic stability of stop codon site and its proximal 3'-UTR are correlated with the GC-content of coding sequences and with the breadth and the level of gene expression. In highly expressed genes stop codon usage is compositionally and structurally consistent with highly efficient translation termination signals.

76 FR 26948 - Small Business Jobs Act Tour: Selected Provisions Having an Effect on Government Contracting

Science.gov (United States)

2011-05-10

...] Small Business Jobs Act Tour: Selected Provisions Having an Effect on Government Contracting AGENCY: U.S... INFORMATION CONTACT: Richard L. Miller, Small Business Job's Act Tour-Office of Government Contracting and..., concerning the Small Business Act Tour: Selected Provisions Having an Effect on Government that announced a...

Error analysis and assessment of unsteady forces acting on a flapping wing micro air vehicle: free flight versus wind-tunnel experimental methods.

Science.gov (United States)

Caetano, J V; Percin, M; van Oudheusden, B W; Remes, B; de Wagter, C; de Croon, G C H E; de Visser, C C

2015-08-20

An accurate knowledge of the unsteady aerodynamic forces acting on a bio-inspired, flapping-wing micro air vehicle (FWMAV) is crucial in the design development and optimization cycle. Two different types of experimental approaches are often used: determination of forces from position data obtained from external optical tracking during free flight, or direct measurements of forces by attaching the FWMAV to a force transducer in a wind-tunnel. This study compares the quality of the forces obtained from both methods as applied to a 17.4 gram FWMAV capable of controlled flight. A comprehensive analysis of various error sources is performed. The effects of different factors, e.g., measurement errors, error propagation, numerical differentiation, filtering frequency selection, and structural eigenmode interference, are assessed. For the forces obtained from free flight experiments it is shown that a data acquisition frequency below 200 Hz and an accuracy in the position measurements lower than ± 0.2 mm may considerably hinder determination of the unsteady forces. In general, the force component parallel to the fuselage determined by the two methods compares well for identical flight conditions; however, a significant difference was observed for the forces along the stroke plane of the wings. This was found to originate from the restrictions applied by the clamp to the dynamic oscillations observed in free flight and from the structural resonance of the clamped FWMAV structure, which generates loads that cannot be distinguished from the external forces. Furthermore, the clamping position was found to have a pronounced influence on the eigenmodes of the structure, and this effect should be taken into account for accurate force measurements.

The impact force acting on a flat plate exposed normally to a rarefied plasma plume issuing from an annular or circular nozzle

Energy Technology Data Exchange (ETDEWEB)

Chen Xi, E-mail: cx-dem@mail.tsinghua.edu.c [Department of Engineering Mechanics, Tsinghua University, Beijing 100084 (China)

2010-08-11

With the indirect thrust measurement of electric thrusters working at a low vacuum chamber pressure as the research background, this paper analyses the impact force acting on a flat plate exposed normally to a rarefied plasma plume issuing from a thruster with an annular or circular exit section for the free-molecule flow regime (at large Knudsen numbers). The constraint relation proposed by Cai and Boyd (2007 J. Spacecr. Rockets 44 619, 1326) about the velocity components of gas particles leaving a location on the nozzle exit section and arriving at a given spatial point outside the nozzle has been employed here to derive the analytical expressions for calculating the impact force. Sample calculation results show that if the flat plate is sufficiently large, the impact force acting on the flat plate calculated for the case without accounting for gas particle reflection at the plate surface agrees well with the axial momentum flux calculated at the thruster exit or the theoretical thrust force of the studied thruster, while accounting for the contribution of gas particles reflected from the plate surface to the impact force production may significantly increase the calculated impact force acting on the flat plate. For a Hall-effect thruster in which the thrust force is dominantly produced by the ions with high directional kinetic energy and the ions are not directly reflected from the plate surface, the contribution to the impact force production of atom species and of gas particles reflected from the plate surface is negligibly small and thus the measured axial impact force acting on a sufficiently large plate can well represent the thrust force of the thruster. On the other hand, if the contribution of the gas particles reflected from the plate surface to the impact force production cannot be neglected (e.g. for the electric thrusters with comparatively low thruster exit temperatures), appreciable error would appear in the indirect thrust measurement.

Modeling of Aerodynamic Force Acting in Tunnel for Analysis of Riding Comfort in a Train

Science.gov (United States)

Kikko, Satoshi; Tanifuji, Katsuya; Sakanoue, Kei; Nanba, Kouichiro

In this paper, we aimed to model the aerodynamic force that acts on a train running at high speed in a tunnel. An analytical model of the aerodynamic force is developed from pressure data measured on car-body sides of a test train running at the maximum revenue operation speed. The simulation of an 8-car train running while being subjected to the modeled aerodynamic force gives the following results. The simulated car-body vibration corresponds to the actual vibration both qualitatively and quantitatively for the cars at the rear of the train. The separation of the airflow at the tail-end of the train increases the yawing vibration of the tail-end car while it has little effect on the car-body vibration of the adjoining car. Also, the effect of the moving velocity of the aerodynamic force on the car-body vibration is clarified that the simulation under the assumption of a stationary aerodynamic force can markedly increase the car-body vibration.

SPEECH ACT IN ADVERTISING LANGUAGE OF 3 PROVIDER MOBILE PHONE PRODUCT

Directory of Open Access Journals (Sweden)

Suhartini Syukri

2016-04-01

Full Text Available This study is an analysis of selected commercial advertisement on product consumed relates to the 3 provider of mobile phone in Indonesian context. Consumers are generally believed to be active and skeptical users of information. Then, the speech act can contribute how successfulness the advertisers in persuading them. There are three kinds of act; they are locutionary act, illocutionary act and perlocutionary act. A perlocutionary act, the act that is produced as a consequences or effect of uttering a specific locution, what is brought about or achieved by saying something, in this case, the effects may be predictable by the conventional status of most illocutions, but may be force of their speech act. Using the qualitative method of research, the writers try to analyze the kinds of illocutionary forces and perlocutionary acts that occur in the advertisement through socio-pragmatic analysis. The result shows that the illocutionary acts commonly equal to the persuasive and informative as well as the advertisement goal, then the perlocutionary effects will be related to the hearers themselves.

SELECTION AND TRAINING OF LEADERS IN THE TURKISH ARMED FORCES

Directory of Open Access Journals (Sweden)

Suat Begec

2013-10-01

Full Text Available Leadership is the most frequently studied concept at the beginning of every period of history. Leader is a commander and the leadership is a command the unit in military sense. The majority of studies about leadership are conducted in the armed forces. Many countries have designed their armies in accordance with these studies. The Turkish Armed Forces (TAF believes the importance of these studies and designs education systems and training in the selection and training of the leaders. The biggest advance in the TAF was being held during the period of education and training improvement. This study investigates to bring that issue into focus and offers a whole social science agenda for leadership in the TAF related research. In this article exploratory research was applied and military history specimens were used. The results of the study demonstrate the geographically powerful armed forces are always needed. A powerful army can indicate the presence of strong leadership. The criteria determined by the selection and training of staff will be one of the most essential tasks that will lead the TAF into the future. These results, however, need further work to validate reliability.

Effect of attractive interactions between polymers on the effective force acting between colloids immersed in a polymer system: Analytic liquid-state theory.

Science.gov (United States)

Chervanyov, A I

2016-12-28

By making use of the polymer reference interaction site model, we analytically study the effect of attractive interactions between polymers on the effective forces acting between colloids immersed in a polymer system. The performed theoretical analysis has no restrictions with respect to the polymer density and relative sizes of the colloids and polymers. The polymer mediated (PM) potential acting between colloids is shown to significantly depend on the strength and range of the polymer-polymer interactions. In the nano-particle limit, where the colloid radius is much smaller than the polymer gyration radius, the presence of attractive polymer-polymer interactions causes only quantitative changes to the PM potential. In the opposite limit of relatively large colloids, the polymer-polymer interactions revert the sign of the total effective force acting between colloids so that this force becomes attractive at sufficiently large polymer densities. With the objective to study an intricate interplay between the attractive PM forces and steric repulsion in different polymer density regimes, we calculate the second virial coefficient B of the total effective potential acting between colloids. The dependence of B on the polymer density is discussed in detail, revealing several novel features of the PM interactions caused by the presence of attractive polymer-polymer interactions.

Influence of tire inflating pressure at dynamic forces acting on articulated trolleybus

Directory of Open Access Journals (Sweden)

Polach Pavel

2017-01-01

Full Text Available ŠKODA VÝZKUM s.r.o. cooperated on the development of the NEOPLAN DMA low-floor articulated trolleybus intended for the Boston city. Multibody models and finite element models of the trolleybus were utilized in the stage of the vehicle design. At the end of the stage of computer modelling and testing of the trolleybus prototype a decision to reduce tire inflating of vehicles in serial production (together with the change the type of shock absorbers used in trolleybus suspension was made. The impact of this change on forces acting in the trolleybus suspension elements (i.e. in air springs and shock absorbers and radius rods on the trolleybus chassis when running on an uneven test track was investigated using multibody simulations. Time histories of the forces calculated utilising multibody models were used as input data of the trolleybus finite element models.

Estimation of the forces acting on the tibiofemoral joint during knee extension exercises

Directory of Open Access Journals (Sweden)

Rodrigo Rico Bini

2008-02-01

Full Text Available http://dx.doi.org/10.5007/1980-0037.2008v10n1p35 The objectives of this study were to: (1 evaluate the resistive torque of an open kinetic chain strength-training machine for performing knee extensions, and (2 perform an analysis estimating internal forces in the tibiofemoral joint. During a fi rst phase of the study, measurements were taken of the machine under analysis (external forces, and then calculations were performed to estimate forces on the lower limb (internal forces. Equations were defi ned to calculate human force (HF, and the moment of muscular force (MMF. Perpendicular muscular force (MFp and joint force (JFp, axial muscular force (MF” and joint force (JF”, and total muscular force (MF and joint force (JF were all calculated. Five knee angles were analyzed (zero, 30, 45, 60, and 90 degrees. A reduction was observed in HF at higher knee angles, while MF and JF also increased at the same time. HF was always lower than the load selected on the machine, which indicates a reduced overload imposed by the machine. The reduction observed in MFp and JFp at higher knee angles indicates a lower tendency to shear the tibia in relation to the femur. At the same time, there was an increase in JF” due to higher MF”. The biomechanical model proposed in this study has shown itself adequate for the day-to-day needs of professionals who supervise orient strength training.

Hamilton's indicators of the force of selection

DEFF Research Database (Denmark)

Baudisch, Annette

2005-01-01

To quantify the force of selection, Hamilton [Hamilton, W. D. (1966) J. Theor. Biol. 12, 12-45] derived expressions for the change in fitness with respect to age-specific mutations. Hamilton's indicators are decreasing functions of age. He concluded that senescence is inevitable: survival...... and fertility decline with age. I show that alternative parameterizations of mutational effects lead to indicators that can increase with age. I then consider the case of deleterious mutations with age-specific effects. In this case, it is the balance between mutation and selection pressure that determines...... the equilibrium number of mutations in a population. In this balance, the effects of different parameterizations cancel out, but only to a linear approximation. I show that mutation accumulation has little impact at ages when this linear approximation holds. When mutation accumulation matters, nonlinear effects...

A method for selecting cis-acting regulatory sequences that respond to small molecule effectors

Directory of Open Access Journals (Sweden)

Allas Ülar

2010-08-01

Full Text Available Abstract Background Several cis-acting regulatory sequences functioning at the level of mRNA or nascent peptide and specifically influencing transcription or translation have been described. These regulatory elements often respond to specific chemicals. Results We have developed a method that allows us to select cis-acting regulatory sequences that respond to diverse chemicals. The method is based on the β-lactamase gene containing a random sequence inserted into the beginning of the ORF. Several rounds of selection are used to isolate sequences that suppress β-lactamase expression in response to the compound under study. We have isolated sequences that respond to erythromycin, troleandomycin, chloramphenicol, meta-toluate and homoserine lactone. By introducing synonymous and non-synonymous mutations we have shown that at least in the case of erythromycin the sequences act at the peptide level. We have also tested the cross-activities of the constructs and found that in most cases the sequences respond most strongly to the compound on which they were isolated. Conclusions Several selected peptides showed ligand-specific changes in amino acid frequencies, but no consensus motif could be identified. This is consistent with previous observations on natural cis-acting peptides, showing that it is often impossible to demonstrate a consensus. Applying the currently developed method on a larger scale, by selecting and comparing an extended set of sequences, might allow the sequence rules underlying the activity of cis-acting regulatory peptides to be identified.

General stability of memory-type thermoelastic Timoshenko beam acting on shear force

Science.gov (United States)

Apalara, Tijani A.

2018-03-01

In this paper, we consider a linear thermoelastic Timoshenko system with memory effects where the thermoelastic coupling is acting on shear force under Neumann-Dirichlet-Dirichlet boundary conditions. The same system with fully Dirichlet boundary conditions was considered by Messaoudi and Fareh (Nonlinear Anal TMA 74(18):6895-6906, 2011, Acta Math Sci 33(1):23-40, 2013), but they obtained a general stability result which depends on the speeds of wave propagation. In our case, we obtained a general stability result irrespective of the wave speeds of the system.

The common good accompaniment on the long road to the site selection. The report of the Commission Disposal of Highly Radioactive Waste and the site selection act; Die gemeinwohlorientierte Begleitung auf dem langen Weg zur Standortauswahl. Zum Bericht der Endlager-Kommission und zur Aenderung des StandAG

Energy Technology Data Exchange (ETDEWEB)

Feldmann, Ulrike

2016-10-15

Almost in time, on 5 July 2016 the 'Commission Disposal of High Radioactive Waste' presented its report according to the German Site Selection Act (for disposal of radioactive waste). On July 20, 2016, the act for reorganisation of the organisational structure in the field of radioactive waste disposal entered into force. The new law raises a number of institutional, organisational and fundamental questions on the way to a final repository for high-level waste. The path continues to appear rocky and long.

Thermomagnetic force acting on an ellipsoidal body immersed into a nonuniformly heated magnetic liquid

International Nuclear Information System (INIS)

Naletova, V.A.; Kvitantsev, A.S.

2002-01-01

A prolate spheroidal body immersed into a nonuniformly heated magnetic liquid in an applied magnetic field has been considered. The expressions for the pressure and velocity of the liquid, temperature and magnetic field have been obtained. The formula for a thermomagnetic force acting on the body has been calculated. It has been shown that the body shape needs to be taken into account when we study the thermomagnetic diffusion of the prolate bodies

Examination of hydrodynamic force acting on a circular cylinder in vortex-induced vibrations in synchronization

Energy Technology Data Exchange (ETDEWEB)

Shen, Linwei; Sun, Zhilin [Ocean College, Zhejiang University, Zhoushan, 316021 (China); Chan, Eng-Soon, E-mail: shenlinwei@zju.edu.cn [Department of Civil and Environmental Engineering, National University of Singapore, No. 1 Engineering Drive 2, Singapore 117576 (Singapore)

2017-04-15

An immersed boundary method is employed to simulate vortex-induced vibrations (VIV) of a circular cylinder in two dimensions. The Reynolds number is 150, and the cylinder mass ratios of 2 and 10 are considered. The synchronization regions for these two mass ratios are determined by the simulations. It is found that the cycle-averaged added mass is about zero at the reduced velocity of 6.1. The instantaneous frequency, which is obtained by Hilbert transformation of the cylinder oscillating displacement, exhibits an important feature whereby the cylinder oscillation in the VIV synchronization region is modulated with a frequency twice the displacement prevailing frequency. The cylinder displacement could still be well approximated by a sine function with a constant frequency and amplitude. However, the lift force acting on the cylinder cannot be estimated in the same manner. In fact, both the lift force amplitude and frequency are modulated. The suggested expression provides a better approximation of the lift force. Moreover, it reveals that the presence of the higher harmonics in the lift force is the result of the amplitude and frequency modulation. (paper)

Tailoring force sensitivity and selectivity by microstructure engineering of multidirectional electronic skins

Science.gov (United States)

Park, Jonghwa; Kim, Jinyoung; Hong, Jaehyung; Lee, Hochan; Lee, Youngoh; Cho, Seungse; Kim, Sung-Woo; Kim, Jae Joon; Kim, Sung Youb; Ko, Hyunhyub

2018-04-01

Electronic skins (e-skins) with high sensitivity to multidirectional mechanical stimuli are crucial for healthcare monitoring devices, robotics, and wearable sensors. In this study, we present piezoresistive e-skins with tunable force sensitivity and selectivity to multidirectional forces through the engineered microstructure geometries (i.e., dome, pyramid, and pillar). Depending on the microstructure geometry, distinct variations in contact area and localized stress distribution are observed under different mechanical forces (i.e., normal, shear, stretching, and bending), which critically affect the force sensitivity, selectivity, response/relaxation time, and mechanical stability of e-skins. Microdome structures present the best force sensitivities for normal, tensile, and bending stresses. In particular, microdome structures exhibit extremely high pressure sensitivities over broad pressure ranges (47,062 kPa-1 in the range of <1 kPa, 90,657 kPa-1 in the range of 1-10 kPa, and 30,214 kPa-1 in the range of 10-26 kPa). On the other hand, for shear stress, micropillar structures exhibit the highest sensitivity. As proof-of-concept applications in healthcare monitoring devices, we show that our e-skins can precisely monitor acoustic waves, breathing, and human artery/carotid pulse pressures. Unveiling the relationship between the microstructure geometry of e-skins and their sensing capability would provide a platform for future development of high-performance microstructured e-skins.

Neuronal NOS inhibitor 1-(2-trifluoromethylphenyl)-imidazole augment the effects of antidepressants acting via serotonergic system in the forced swimming test in rats.

Science.gov (United States)

Ulak, Güner; Mutlu, Oguz; Akar, Füruzan Yildiz; Komsuoğlu, F Ipek; Tanyeri, Pelin; Erden, B Faruk

2008-10-01

Treatment-resistant depression has necessitated new therapeutic strategies in augmenting the therapeutic actions of currently existing antidepressant drugs. The aim of this study was to investigate the possibility of synergistic interaction between 1-(2-trifluoromethylphenyl)-imidazole (TRIM), a novel neuronal nitric oxide synthase (nNOS) inhibitor and conventional antidepressants of different classes in the forced swimming test (FST) in rats. TRIM decreased the immobility time at 50 mg/kg doses in the FST in rats. Treatment with a behaviourally subeffective dose of TRIM (20 mg/kg) augmented the behavioural effect of tricyclic antidepressant imipramine, selective serotonin re-uptake inhibitor (SSRI) citalopram and fluoxetine or selective serotonin reuptake enhancer tianeptine but failed to augment the antidepressant effect of reboxetine, a noradrenaline re-uptake inhibitor, in this test. Therefore inhibition of NOS augments the effects of antidepressants acting on serotonergic system in the FST. Neither TRIM (10-50 mg/kg) nor other drug treatments affected the locomotor activity of animals. These findings are in agreement with the view that antidepressant effects or augmentation of these effects in the FST may be explained with inhibition of NOS activity and this may be a new approach in offering greater therapeutic efficacy of antidepressants acting via serotonergic system.

Strength and tempo of directional selection in the wild

OpenAIRE

Hoekstra, H. E.; Hoekstra, J. M.; Berrigan, D.; Vignieri, S. N.; Hoang, A.; Hill, C. E.; Beerli, P.; Kingsolver, J. G.

2001-01-01

Directional selection is a major force driving adaptation and evolutionary change. However, the distribution, strength, and tempo of phenotypic selection acting on quantitative traits in natural populations remain unclear across different study systems. We reviewed the literature (1984–1997) that reported the strength of directional selection as indexed by standardized linear selection gradients (β). We asked how strong are viability and sexual selection, and whether strength of selection is ...

Uniform Selection as a Primary Force Reducing Population Genetic Differentiation of Cavitation Resistance across a Species Range

Science.gov (United States)

Lamy, Jean-Baptiste; Bouffier, Laurent; Burlett, Régis; Plomion, Christophe; Cochard, Hervé; Delzon, Sylvain

2011-01-01

Background Cavitation resistance to water stress-induced embolism determines plant survival during drought. This adaptive trait has been described as highly variable in a wide range of tree species, but little is known about the extent of genetic and phenotypic variability within species. This information is essential to our understanding of the evolutionary forces that have shaped this trait, and for evaluation of its inclusion in breeding programs. Methodology We assessed cavitation resistance (P 50), growth and carbon isotope composition in six Pinus pinaster populations in a provenance and progeny trial. We estimated the heritability of cavitation resistance and compared the distribution of neutral markers (F ST) and quantitative genetic differentiation (Q ST), for retrospective identification of the evolutionary forces acting on these traits. Results/Discussion In contrast to growth and carbon isotope composition, no population differentiation was found for cavitation resistance. Heritability was higher than for the other traits, with a low additive genetic variance (h2 ns = 0.43±0.18, CVA = 4.4%). Q ST was significantly lower than F ST, indicating uniform selection for P 50, rather than genetic drift. Putative mechanisms underlying QST

Numerical method for wave forces acting on partially perforated caisson

Science.gov (United States)

Jiang, Feng; Tang, Xiao-cheng; Jin, Zhao; Zhang, Li; Chen, Hong-zhou

2015-04-01

The perforated caisson is widely applied to practical engineering because of its great advantages in effectively wave energy consumption and cost reduction. The attentions of many scientists were paid to the fluid-structure interaction between wave and perforated caisson studies, but until now, most concerns have been put on theoretical analysis and experimental model set up. In this paper, interaction between the wave and the partial perforated caisson in a 2D numerical wave flume is investigated by means of the renewed SPH algorithm, and the mathematical equations are in the form of SPH numerical approximation based on Navier-Stokes equations. The validity of the SPH mathematical method is examined and the simulated results are compared with the results of theoretical models, meanwhile the complex hydrodynamic characteristics when the water particles flow in or out of a wave absorbing chamber are analyzed and the wave pressure distribution of the perforated caisson is also addressed here. The relationship between the ratio of total horizontal force acting on caisson under regular waves and its influence factors is examined. The data show that the numerical calculation of the ratio of total horizontal force meets the empirical regression equation very well. The simulations of SPH about the wave nonlinearity and breaking are briefly depicted in the paper, suggesting that the advantages and great potentiality of the SPH method is significant compared with traditional methods.

Empirical Validation of a Hypothesis of the Hormetic Selective Forces Driving the Evolution of Longevity Regulation Mechanisms

Directory of Open Access Journals (Sweden)

Alejandra Gomez-Perez

2016-12-01

Full Text Available Exogenously added lithocholic bile acid and some other bile acids slow down yeast chronological aging by eliciting a hormetic stress response and altering mitochondrial functionality. Unlike animals, yeast cells do not synthesize bile acids. We therefore hypothesized that bile acids released into an ecosystem by animals may act as interspecies chemical signals that generate selective pressure for the evolution of longevity regulation mechanisms in yeast within this ecosystem. To empirically verify our hypothesis, in this study we carried out a 3-step process for the selection of long-lived yeast species by a long-term exposure to exogenous lithocholic bile acid. Such experimental evolution yielded 20 long-lived mutants, 3 of which were capable of sustaining their considerably prolonged chronological lifespans after numerous passages in medium without lithocholic acid. The extended longevity of each of the 3 long-lived yeast species was a dominant polygenic trait caused by mutations in more than two nuclear genes. Each of the 3 mutants displayed considerable alterations to the age-related chronology of mitochondrial respiration and showed enhanced resistance to chronic oxidative, thermal and osmotic stresses. Our findings empirically validate the hypothesis suggesting that hormetic selective forces can drive the evolution of longevity regulation mechanisms within an ecosystem.

Effects of Force Field Selection on the Computational Ranking of MOFs for CO2 Separations.

Science.gov (United States)

Dokur, Derya; Keskin, Seda

2018-02-14

Metal-organic frameworks (MOFs) have been considered as highly promising materials for adsorption-based CO 2 separations. The number of synthesized MOFs has been increasing very rapidly. High-throughput molecular simulations are very useful to screen large numbers of MOFs in order to identify the most promising adsorbents prior to extensive experimental studies. Results of molecular simulations depend on the force field used to define the interactions between gas molecules and MOFs. Choosing the appropriate force field for MOFs is essential to make reliable predictions about the materials' performance. In this work, we performed two sets of molecular simulations using the two widely used generic force fields, Dreiding and UFF, and obtained adsorption data of CO 2 /H 2 , CO 2 /N 2 , and CO 2 /CH 4 mixtures in 100 different MOF structures. Using this adsorption data, several adsorbent evaluation metrics including selectivity, working capacity, sorbent selection parameter, and percent regenerability were computed for each MOF. MOFs were then ranked based on these evaluation metrics, and top performing materials were identified. We then examined the sensitivity of the MOF rankings to the force field type. Our results showed that although there are significant quantitative differences between some adsorbent evaluation metrics computed using different force fields, rankings of the top MOF adsorbents for CO 2 separations are generally similar: 8, 8, and 9 out of the top 10 most selective MOFs were found to be identical in the ranking for CO 2 /H 2 , CO 2 /N 2 , and CO 2 /CH 4 separations using Dreiding and UFF. We finally suggested a force field factor depending on the energy parameters of atoms present in the MOFs to quantify the robustness of the simulation results to the force field selection. This easily computable factor will be highly useful to determine whether the results are sensitive to the force field type or not prior to performing computationally demanding

Selective visual scaling of time-scale processes facilitates broadband learning of isometric force frequency tracking.

Science.gov (United States)

King, Adam C; Newell, Karl M

2015-10-01

The experiment investigated the effect of selectively augmenting faster time scales of visual feedback information on the learning and transfer of continuous isometric force tracking tasks to test the generality of the self-organization of 1/f properties of force output. Three experimental groups tracked an irregular target pattern either under a standard fixed gain condition or with selectively enhancement in the visual feedback display of intermediate (4-8 Hz) or high (8-12 Hz) frequency components of the force output. All groups reduced tracking error over practice, with the error lowest in the intermediate scaling condition followed by the high scaling and fixed gain conditions, respectively. Selective visual scaling induced persistent changes across the frequency spectrum, with the strongest effect in the intermediate scaling condition and positive transfer to novel feedback displays. The findings reveal an interdependence of the timescales in the learning and transfer of isometric force output frequency structures consistent with 1/f process models of the time scales of motor output variability.

Experimental study on the estimation method of hydrodynamic force acting on floating offshore structures; Futaishiki kaiyo kozobutsu ni kuwawaru ryutairyoku no suiteiho ni kansuru jikkenteki kenkyu

Energy Technology Data Exchange (ETDEWEB)

Hoshino, K; Kato, S [Ship Research Inst., Tokyo (Japan); Koterayama, W [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics

1996-04-10

In the design of various floating offshore structures (FOS), the functionality, safety and amenity of FOSs were examined by estimating responses of FOSs to environmental external forces such as wave, wind and flow. In this paper, the estimation method of drag acting on the whole FOS was established by combining previous study results on hydrodynamic force acting on various bodies such as Reynolds number effect (RNE), 3-D effect (TDE) and interference effect (IE). This hydrodynamic force was also compared with that obtained from the experiment result on a FOS model for TLP to confirm the applicability of this estimation method. The estimation result on the drag coefficient in steady flow by considering RNE, TDE and IE well agreed with experimental one. The drag coefficient acting on FOSs in heaving could be estimated in practically sufficient accuracy by considering drag acting on not columns but only square columns. The estimation result on the drag coefficient acting on FOSs in surging by considering RNE, TDE and IE well agreed with experimental one. 12 refs., 10 figs., 1 tab.

Act No. 732 of December 7, 1988. Act to amend the Act on civil liability for nuclear damage

International Nuclear Information System (INIS)

1988-01-01

This Act amends Act No. 332 of June 19, 1974 on civil liability for nuclear damage, enabling Denmark to ratify the 1982 Protocols to amend the Paris Convention and the Brussels Supplementary Convention as well as the 1988 Joint Protocol relating to the application of the Vienna and the Paris Convention. The 1988 Act raises the nuclear operator's liability from 75 million DKr to 60 million SDRs while cover involving State funds is raised from 120 million units of account to 300 million SDRs. The Act entered into force on July 1, 1989 except for the provision on State funds which becomes effective when the 1982 Protocol amending the Brussels Convention comes into force. (NEA) [fr

Unsteady hydrodynamic forces acting on a hand and its flow field during sculling motion.

Science.gov (United States)

Takagi, Hideki; Shimada, Shohei; Miwa, Takahiro; Kudo, Shigetada; Sanders, Ross; Matsuuchi, Kazuo

2014-12-01

The goal of this research is to clarify the mechanism by which unsteady forces are generated during sculling by a skilled swimmer and thereby to contribute to improving propulsive techniques. We used particle image velocimetry (PIV) to acquire data on the kinematics of the hand during sculling, such as fluid forces and flow field. By investigating the correlations between these data, we expected to find a new propulsion mechanism. The experiment was performed in a flow-controlled water channel. The participant executed sculling motions to remain at a fixed position despite constant water flow. PIV was used to visualize the flow-field cross-section in the plane of hand motion. Moreover, the fluid forces acting on the hand were estimated from pressure distribution measurements performed on the hand and simultaneous three-dimensional motion analysis. By executing the sculling motion, a skilled swimmer produces large unsteady fluid forces when the leading-edge vortex occurs on the dorsal side of the hand and wake capture occurs on the palm side. By using a new approach, we observed interesting unsteady fluid phenomena similar to those of flying insects. The study indicates that it is essential for swimmers to fully exploit vortices. A better understanding of these phenomena might lead to an improvement in sculling techniques. Copyright © 2014 Elsevier B.V. All rights reserved.

20 CFR 670.420 - Are there any special requirements for enrollment related to the Military Selective Service Act?

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Are there any special requirements for enrollment related to the Military Selective Service Act? 670.420 Section 670.420 Employees' Benefits... INVESTMENT ACT Recruitment, Eligibility, Screening, Selection and Assignment, and Enrollment § 670.420 Are...

Uniform selection as a primary force reducing population genetic differentiation of cavitation resistance across a species range.

Directory of Open Access Journals (Sweden)

Jean-Baptiste Lamy

Full Text Available BACKGROUND: Cavitation resistance to water stress-induced embolism determines plant survival during drought. This adaptive trait has been described as highly variable in a wide range of tree species, but little is known about the extent of genetic and phenotypic variability within species. This information is essential to our understanding of the evolutionary forces that have shaped this trait, and for evaluation of its inclusion in breeding programs. METHODOLOGY: We assessed cavitation resistance (P(50, growth and carbon isotope composition in six Pinus pinaster populations in a provenance and progeny trial. We estimated the heritability of cavitation resistance and compared the distribution of neutral markers (F(ST and quantitative genetic differentiation (Q(ST, for retrospective identification of the evolutionary forces acting on these traits. RESULTS/DISCUSSION: In contrast to growth and carbon isotope composition, no population differentiation was found for cavitation resistance. Heritability was higher than for the other traits, with a low additive genetic variance (h(2 (ns = 0.43±0.18, CV(A = 4.4%. Q(ST was significantly lower than F(ST, indicating uniform selection for P(50, rather than genetic drift. Putative mechanisms underlying Q(ST

Fluid dynamic forces acting on a circular tube bundle in cross flow. Proposals of generation condition of vortex-induced vibration and correlation equation of turbulence-induced exciting force

International Nuclear Information System (INIS)

Inada, Fumio; Yoneda, Kimitoshi; Yasuo, Akira; Nishihara, Takashi

2000-01-01

In the circular tube bundle immersed in the crossflow, the exciting force induced by the turbulence and periodically discharged vortices becomes large, and it is necessary to confirm a long-term integrity to the flow induced vibration. In this report, the local fluid exciting force and the correlation length in the direction of tube axis were measured. The exciting force acting on the first row was smaller than that inside the tube bundle, and the exciting force was almost saturated at the third row. As for vortex induced vibration, there could be an influence when a dimensionless frequency was 0.4 or less. When vortex induced vibration did not affect the vibration, a correlation composed of a correlation length and power spectrum density of the local fluid exciting force were proposed, with which we could estimate the amplitude of the vibration. A computer program to estimate the vibration amplitude and maximum stress was made using the flow velocity distribution and the mode of vibration. (author)

Identification of impact force acting on composite laminated plates using the radiated sound measured with microphones

Science.gov (United States)

Atobe, Satoshi; Nonami, Shunsuke; Hu, Ning; Fukunaga, Hisao

2017-09-01

Foreign object impact events are serious threats to composite laminates because impact damage leads to significant degradation of the mechanical properties of the structure. Identification of the location and force history of the impact that was applied to the structure can provide useful information for assessing the structural integrity. This study proposes a method for identifying impact forces acting on CFRP (carbon fiber reinforced plastic) laminated plates on the basis of the sound radiated from the impacted structure. Identification of the impact location and force history is performed using the sound pressure measured with microphones. To devise a method for identifying the impact location from the difference in the arrival times of the sound wave detected with the microphones, the propagation path of the sound wave from the impacted point to the sensor is examined. For the identification of the force history, an experimentally constructed transfer matrix is employed to relate the force history to the corresponding sound pressure. To verify the validity of the proposed method, impact tests are conducted by using a CFRP cross-ply laminate as the specimen, and an impulse hammer as the impactor. The experimental results confirm the validity of the present method for identifying the impact location from the arrival time of the sound wave detected with the microphones. Moreover, the results of force history identification show the feasibility of identifying the force history accurately from the measured sound pressure using the experimental transfer matrix.

INDICATORS OF MAXIMAL FLEXOR FORCE OF LEFT AND RIGHT HAND FOR THE POLICE SELECTION CRITERIA PURPOSES

Directory of Open Access Journals (Sweden)

Milivoj Dopsaj

2006-06-01

Full Text Available As a part of their professional responsibilities, police officers have authorization, in situation determined by law, to apply physical force or means of force. Due to given professional reasons, selection among the candidates as well as routine physical capability assessments, should have professional-methodological basis and scientific foundation. Muscle groups of particular reference in relationship to estimate general contraction characteristic in regard to force, and at the same time very easy to test are flexor muscles of fingers of the hand (test “hand squeeze”. The aim of this research is to define criterion characteristic for the population to function for selection and estimation of the hand squeeze force among policemen. This research had 723 participants, students of the Police Academy, as representatives of policemen between 19 and 24 years of age. In order to estimate force of hand grip (both right and left hand, we utilized tensiometric method, and standard procedure previously described (1. For the statistical analysis we used basic descriptive analysis, cluster analysis (defining 7 characteristic classes (clusters as a function of population tested –unacceptable, poor, below average, averaged, above average, excellent and superior, and factor analysis (definition of the selection test as a function of selection procedure (10. Our results indicate that averaged hand grip force among the tested population is 61.70±8.97 DaN (Min – Max=43.43-101.41 for left hand, and 65.11±9.34 DaN (Min – Max= 46.54-109.75 for right hand. The values for the force of defined cluster centers of left hand are: Cluster1-7=50.22, 55.76, 61.61, 67.84, 74.71, 84.02 and 97.15 DaN, and right hand are: Cluster1-7=53.40, 60.27, 66.10, 72.20, 79.70, 92.55 and 105.65 DaNFactor analysis results have shown that one factor has been isolated that accounted for 91.10 worthy variance. Regarding the individual variability, for the saturation of the isolated

On the redshift distribution and physical properties of ACT-selected DSFGs

Science.gov (United States)

Su, T.; Marriage, T. A.; Asboth, V.; Baker, A. J.; Bond, J. R.; Crichton, D.; Devlin, M. J.; Dünner, R.; Farrah, D.; Frayer, D. T.; Gralla, M. B.; Hall, K.; Halpern, M.; Harris, A. I.; Hilton, M.; Hincks, A. D.; Hughes, J. P.; Niemack, M. D.; Page, L. A.; Partridge, B.; Rivera, J.; Scott, D.; Sievers, J. L.; Thornton, R. J.; Viero, M. P.; Wang, L.; Wollack, E. J.; Zemcov, M.

2017-01-01

We present multi-wavelength detections of nine candidate gravitationally lensed dusty star-forming galaxies (DSFGs) selected at 218 GHz (1.4 mm) from the Atacama Cosmology Telescope (ACT) equatorial survey. Among the brightest ACT sources, these represent the subset of the total ACT sample lying in Herschel SPIRE fields, and all nine of the 218 GHz detections were found to have bright Herschel counterparts. By fitting their spectral energy distributions (SEDs) with a modified blackbody model with power-law temperature distribution, we find the sample has a median redshift of z=4.1^{+1.1}_{-1.0} (68 per cent confidence interval), as expected for 218 GHz selection, and an apparent total infrared luminosity of log _{10}(μ L_IR/L_{odot }) = 13.86^{+0.33}_{-0.30}, which suggests that they are either strongly lensed sources or unresolved collections of unlensed DSFGs. The effective apparent diameter of the sample is sqrt{μ }d= 4.2^{+1.7}_{-1.0} kpc, further evidence of strong lensing or multiplicity, since the typical diameter of DSFGs is 1.0-2.5 kpc. We emphasize that the effective apparent diameter derives from SED modelling without the assumption of optically thin dust (as opposed to image morphology). We find that the sources have substantial optical depth (tau = 4.2^{+3.7}_{-1.9}) to dust around the peak in the modified blackbody spectrum (λobs ≤ 500 μm), a result that is robust to model choice.

On the Redshift Distribution and Physical Properties of ACT-Selected DSFGs

Science.gov (United States)

Su, T.; Marriage, T. A.; Asboth, V.; Baker, A. J.; Bond, J. R.; Crichton, D.; Devlin, M. J.; Dunner, R.; Farrah, D.; Frayer, D. T.;

Fluid-elastic force measurements acting on a tube bundle in two-phase cross flow

International Nuclear Information System (INIS)

Inada, Fumio; Kawamura, Koji; Yasuo, Akira

1996-01-01

Fluid-elastic force acting on a square tube bundle of P/D = 1.47 in air-water two-phase cross flow was measured to investigate the characteristics and to clarify whether the fluid elastic vibration characteristics could be expressed using two-phase mixture characteristics. Measured fluid elastic forces were separated into fluid-elastic force coefficients such as added mass, added stiffness, and added damping coefficient. The added damping coefficient was separated into a two-phase damping and a flow-dependent component as in previous research (Carlucci, 1981 and 1983; Pettigrew, 1994). These coefficients were nondimensionalized with two-phase mixture characteristics such as void fraction, mixture density and mixture velocity, which were obtained using the drift-flux model with consideration given to the model. The result was compared with the result obtained with the homogeneous model. It was found that fluid-elastic force coefficients could be expressed with two-phase flow mixture characteristics very well in the experimental result, and that better result can be derived using the slip model as compared to the homogeneous model. Added two-phase flow, which could be expressed as a function of void fraction, where two-phase damping was nondimensionalized with the relative velocity between the gas and liquid phases used as a reference velocity. Using these, the added stiffness coefficient and flow-dependent component of damping could be expressed very well as a function of nondimensional mixture velocity

Genome-wide detection of selection and other evolutionary forces

DEFF Research Database (Denmark)

Xu, Zhuofei; Zhou, Rui

2015-01-01

As is well known, pathogenic microbes evolve rapidly to escape from the host immune system and antibiotics. Genetic variations among microbial populations occur frequently during the long-term pathogen–host evolutionary arms race, and individual mutation beneficial for the fitness can be fixed...... to scan genome-wide alignments for evidence of positive Darwinian selection, recombination, and other evolutionary forces operating on the coding regions. In this chapter, we describe an integrative analysis pipeline and its application to tracking featured evolutionary trajectories on the genome...

Transmit Antenna Selection for Multi-User Underlay Cognitive Transmission with Zero-Forcing Beamforming

KAUST Repository

Hanif, Muhammad; Yang, Hong-Chuan; Alouini, Mohamed-Slim

2017-01-01

We present a transmit antenna subset selection scheme for an underlay cognitive system serving multiple secondary receivers. The secondary system employs zero-forcing beamforming to nullify the interference to multiple primary users and eliminate

The Rehabilitation Act of 1973--its impact on employee selection practices.

Science.gov (United States)

Guy, J H

1978-01-01

The employee selection practices of private and public enterprises that contract with the federal government or receive federal financial assistance have been subjected to extensive regulation by the agencies administering sections 503 and 504 of the 1973 Rehabilitation Act, which provide protection to qualified handicapped individuals. The author discusses the nature and significance of these restrictions and gives practical guidance on compliance. She cautions that the enforcement powers of the agencies administering the Act--the power to cut off federal funds, debar from future contracts, award back pay, and provide equitable relief--make it necessary for employers to show good faith and proper justification when a decision is made to reject a handicapped person for a job or a promotion.

Oscillating microbubbles for selective particle sorting in acoustic microfluidic devices

Science.gov (United States)

Rogers, Priscilla; Xu, Lin; Neild, Adrian

2012-05-01

In this study, acoustic waves were used to excite a microbubble for selective particle trapping and sorting. Excitation of the bubble at its volume resonance, as necessary to drive strong fluid microstreaming, resulted in the particles being either selectively attracted to the bubble or continuing to follow the local microstreamlines. The operating principle exploited two acoustic phenomena acting on the particle suspension: the drag force arising from the acoustic microstreaming and the secondary Bjerknes force, i.e. the attractive radiation force produced between an oscillating bubble and a non-buoyant particle. It was also found that standing wave fields within the fluid chamber could be used to globally align bubbles and particles for local particle sorting by the bubble.

Forces acting on particles in a Pelton bucket and similarity considerations for erosion

Science.gov (United States)

Rai, A. K.; Kumar, A.; Staubli, T.

2016-11-01

High sediment transport rates cause severe erosion issues in hydropower plants leading to interruptions in power generation, decrease in efficiency and shutdown for repair and maintenance. For Pelton turbines operating at high head, the issue of erosion is severe, especially in components like buckets, nozzle rings and needles. Goal of the study is to develop erosion focussed guidelines for both designing as well as operating hydropower plants with Pelton runners. In this study, the flow of sediment inside a Pelton bucket with respect to forces acting on solid particles is analysed with an analytical approach by considering different dynamic forces originating from the rotation of the turbine, the curvature of the buckets, and the Coriolis effect. Further, the path of sediment particles and its effect on erosion phenomena are analysed based on the process of separation of different sized sediment particles from streamlines. The data relating to head, power, discharge, number of jet and efficiency of 250 hydropower plants installed all over the world were analysed in this study to find the major factors related to erosion in Pelton turbine bucket. From analysis of different force ratios, it is found that an increase of D/B, i.e. the ratio of pitch circle diameter and bucket width, and/or decrease of specific speed (nq) enhances erosion. As the erosion process depends significantly on nondimensional parameters D/B and nq, these are considered as similarity measures for scaling of the erosion process in the Pelton buckets of various sizes.

Disentangling phylogenetic constraints from selective forces in the evolution of trematode transmission stages

NARCIS (Netherlands)

Koehler, A.V.; Brown, B.; Poulin, R.; Thieltges, D.W.; Fredensborg, B.L.

2012-01-01

The transmission stages of parasites are key determinants of parasite fitness, but they also incur huge mortality. Yet the selective forces shaping the sizes of transmission stages remain poorly understood. We ran a comparative analysis of interspecific variation in the size of transmission stages

Countermeasures for Reducing Unsteady Aerodynamic Force Acting on High-Speed Train in Tunnel by Use of Modifications of Train Shapes

Science.gov (United States)

Suzuki, Masahiro; Nakade, Koji; Ido, Atsushi

As the maximum speed of high-speed trains increases, flow-induced vibration of trains in tunnels has become a subject of discussion in Japan. In this paper, we report the result of a study on use of modifications of train shapes as a countermeasure for reducing an unsteady aerodynamic force by on-track tests and a wind tunnel test. First, we conduct a statistical analysis of on-track test data to identify exterior parts of a train which cause the unsteady aerodynamic force. Next, we carry out a wind tunnel test to measure the unsteady aerodynamic force acting on a train in a tunnel and examined train shapes with a particular emphasis on the exterior parts identified by the statistical analysis. The wind tunnel test shows that fins under the car body are effective in reducing the unsteady aerodynamic force. Finally, we test the fins by an on-track test and confirmed its effectiveness.

Coupling of continuum mechanics and electrodynamics:an investigation of electromagnetic force models by means of experiments and selected problems

OpenAIRE

Reich, Felix Alexander

2017-01-01

In the literature, many models of electromagnetic momentum are proposed. Each model implies a form of the electromagnetic force density, which acts as a source in the mechanical momentum balance. The debate as to which model of the electromagnetic force is "correct" for arbitrary materials and processes is ongoing. Most authors argue in favor or against specific models by virtue of thought experiments, e.g, with light waves. The topic of this work is to show that experiments conducted on a ma...

New US energy policy act in force

International Nuclear Information System (INIS)

Heller, W.

2005-01-01

The United States of America is accused by politicians of the German Red-Green federal government, but also by the EU, of not caring enough about climate protection. This allegation is fueled, above all, by the refusal of the United States to sign the Kyoto Protocol of the UN Climate Framework Convention of 1997. However, the US is not idle in this respect. In late July, the United States together with China, India, Japan, South Korea and Australia agreed on an Asia-Pacific Partnership on Clean Development and Climate. Almost at the same time, on July 29, 2005, after more than five years of debate, the US Congress adopted new energy legislation (A Bill to Ensure Jobs for the Future with Secure and Reliable Energy - the Energy Policy Act of 2005). The holistic aspect in this piece of US legislation covers nearly the whole field of energy policy. The Act encompasses these areas: - energy efficiency, - renewable energies, - oil and natural gas, - clean coal, - nuclear power, - vehicles and fuels, - hydrogen, - electricity, - research and development. With its new Energy Policy Act, the United States has paved the way politically for making energy supply in the world's largest industrialized national securer and safer on a technical basis and less pollutant for the environment and the climate. (orig.)

Static magnetic forces and torques in ATLAS

International Nuclear Information System (INIS)

Morozov, N.A.; Samsonov, E.V.; Vorozhtsov, S.B.

1998-01-01

The magnetic forces acting on the various metallic objects around the ATLAS detector, are the subject of the given paper. A system designer could use the information on global forces and torque acting on various components, obtained in this report, to optimize them. The results of force calculations could also serve as additional criteria for the replacement of the magnetic baseline material of various structures by nonmagnetic ones

What forces act in relativistic gyroscope precession?

Science.gov (United States)

Semerák, Oldrich

1996-11-01

The translation of the relativistic motion into the language of forces, proposed by the author (1995, Nuovo Cimento B 110 973), is employed to interpret the gyroscope precession in general relativity. The precession is referred to the comoving Frenet triad built up along the projection of the gyroscope's trajectory onto the 3-space of the local hypersurface-orthogonal observer. The contributions of the centrifugal, the gravitational and the dragging + Coriolis forces are identified respectively with the Thomas, the geodetic, and the gravitomagnetic components of precession. Explicit expressions are given for several simple types of motion in the Kerr (or simpler) field in order to show that the general formulae obtained are not only very simple, but also yield clear results in accord with intuition in concrete situations.

Comparisons Between Experimental and Semi-theoretical Cutting Forces of CCS Disc Cutters

Science.gov (United States)

Xia, Yimin; Guo, Ben; Tan, Qing; Zhang, Xuhui; Lan, Hao; Ji, Zhiyong

2018-05-01

This paper focuses on comparisons between the experimental and semi-theoretical forces of CCS disc cutters acting on different rocks. The experimental forces obtained from LCM tests were used to evaluate the prediction accuracy of a semi-theoretical CSM model. The results show that the CSM model reliably predicts the normal forces acting on red sandstone and granite, but underestimates the normal forces acting on marble. Some additional LCM test data from the literature were collected to further explore the ability of the CSM model to predict the normal forces acting on rocks of different strengths. The CSM model underestimates the normal forces acting on soft rocks, semi-hard rocks and hard rocks by approximately 38, 38 and 10%, respectively, but very accurately predicts those acting on very hard and extremely hard rocks. A calibration factor is introduced to modify the normal forces estimated by the CSM model. The overall trend of the calibration factor is characterized by an exponential decrease with increasing rock uniaxial compressive strength. The mean fitting ratios between the normal forces estimated by the modified CSM model and the experimental normal forces acting on soft rocks, semi-hard rocks and hard rocks are 1.076, 0.879 and 1.013, respectively. The results indicate that the prediction accuracy and the reliability of the CSM model have been improved.

Aridity and grazing as convergent selective forces: an experiment with an Arid Chaco bunchgrass.

Science.gov (United States)

Quiroga, R Emiliano; Golluscio, Rodolfo A; Blanco, Lisandro J; Fernández, Roberto J

2010-10-01

It has been proposed that aridity and grazing are convergent selective forces: each one selects for traits conferring resistance to both. However, this conceptual model has not yet been experimentally validated. The aim of this work was to experimentally evaluate the effect of aridity and grazing, as selective forces, on drought and grazing resistance of populations of Trichloris crinita, a native perennial forage grass of the Argentinean Arid Chaco region. We collected seeds in sites with four different combinations of aridity and grazing history (semiarid/ subhumid x heavily grazed/lightly grazed), established them in pots in a common garden, and subjected the resulting plants to different combinations of drought and defoliation. Our results agreed with the convergence model. Aridity has selected T. crinita genotypes that respond better to drought and defoliation in terms of sexual reproduction and leaf growth, and that can evade grazing due to a lower shoot: root ratio and a higher resource allocation to reserves (starch) in stem bases. Similarly, grazing has selected genotypes that respond better to drought and defoliation in terms of sexual reproduction and that can evade grazing due to a lower digestibility of leaf blades. These results allow us to extend concepts of previous models in plant adaptation to herbivory to models on plant adaptation to drought. The only variable in which we obtained a result opposite to predictions was plant height, as plants from semiarid sites were taller (and with more erect tillers) than plants from subhumid sites; we hypothesize that this result might have been a consequence of the selection exerted by the high solar radiation and soil temperatures of semiarid sites. In addition, our work allows for the prediction of the effects of dry or wet growing seasons on the performance of T. crinita plants. Our results suggest that we can rely on dry environments for selecting grazing-resistant genotypes and on high grazing pressure

Negative Knudsen force on heated microbeams

KAUST Repository

Zhu, Taishan; Ye, Wenjing; Zhang, Jun

2011-01-01

Knudsen force acting on a heated microbeam adjacent to a cold substrate in a rarefied gas is a mechanical force created by unbalanced thermal gradients. The measured force has its direction pointing towards the side with a lower thermal gradient

Hydrodynamic forces on inundated bridge decks

Science.gov (United States)

2009-05-01

The hydrodynamic forces experienced by an inundated bridge deck have great importance in the design of bridges. Specifically, the drag force, lift force, and the moment acting on the bridge deck under various levels of inundation and a range of flow ...

A new method for measuring lift forces acting on an airfoil under dynamic conditions

Energy Technology Data Exchange (ETDEWEB)

Wolken-Moehlmann, Gerrit; Peinke, Joachim [Institute of Physics, University of Oldenburg (Germany)

2008-07-01

Wind turbines operate in a turbulent atmospheric boundary layer and are exposed to strong wind fluctuations in time and space. This can induce the dynamic stall, a phenomenon that causes extra loads. Dynamic stall occurs under fast changes in the angle of attack (AoA) and was determined in detail in helicopter research. But in contrast to helicopter aerodynamics, the changes in the AoA of wind turbine airfoils are in general non-sinusoidal, and thus it seems to be difficult to use these measurements and models. Our goal is to acquire lift data under conditions more comparable to real wind turbines, including non-periodic changes in the AoA. For this purpose a closed test section for our wind tunnel was built. An airfoil with a chord length of 0.2m will be rotated by a stepping motor with angular velocities of up to 300 {sup circle} /s. With a maximum wind velocity of 50m/s, Reynolds numbers of Re=700 000 can be realized. The lift force is determined by the counter forces acting on the wind tunnel walls. These are measured by two lines of 40 pressure sensors with sampling rates up to 2kHz. The results show distinct dynamic stall characteristics. Further experiments with different parameters and foils will give a better insight in dynamic stall and a verification and improvement of existing models.

Dust Transport And Force Equilibria In Magnetized Dusty DC Discharges

International Nuclear Information System (INIS)

Land, Victor; Thomas, Edward Jr.; Williams, Jeremaiah

2005-01-01

We have performed experiments on magnetized dusty Argon DC discharges. Here we report on the characterization of the plasma- and the dustparameters and on the response of the dust particles and the plasma to a change in the magnetic configuration inside the discharge. Finally, we show a case in which the balance of forces acting on the dust particles differs from the classical balance (in which the electrostatic force balances the downward force of gravity). In this case the electrostatic force acts as a downward force on the dust particles. From observations we will argue that the ion drag force might be the force that balances this downward electrostatic force

Transmit Antenna Selection for Multi-User Underlay Cognitive Transmission with Zero-Forcing Beamforming

KAUST Repository

Hanif, Muhammad

2017-03-20

We present a transmit antenna subset selection scheme for an underlay cognitive system serving multiple secondary receivers. The secondary system employs zero-forcing beamforming to nullify the interference to multiple primary users and eliminate inter-user interference to the secondary users simultaneously. Simulation results show that the proposed scheme achieves near-optimal performance with low computational complexity. Lastly, an optimal power allocation strategy is also introduced to improve the secondary network throughput.

Estimation of Coriolis Force and Torque Acting on Ares-1

Science.gov (United States)

Mackey, Ryan M.; Kulikov, Igor K.; Smelyanskiy, Vadim; Luchinsky, Dmitry; Orr, Jeb

2011-01-01

A document describes work on the origin of Coriolis force and estimating Coriolis force and torque applied to the Ares-1 vehicle during its ascent, based on an internal ballistics model for a multi-segmented solid rocket booster (SRB).

Purifying selection acts on coding and non-coding sequences of paralogous genes in Arabidopsis thaliana.

Science.gov (United States)

Hoffmann, Robert D; Palmgren, Michael

2016-06-13

Whole-genome duplications in the ancestors of many diverse species provided the genetic material for evolutionary novelty. Several models explain the retention of paralogous genes. However, how these models are reflected in the evolution of coding and non-coding sequences of paralogous genes is unknown. Here, we analyzed the coding and non-coding sequences of paralogous genes in Arabidopsis thaliana and compared these sequences with those of orthologous genes in Arabidopsis lyrata. Paralogs with lower expression than their duplicate had more nonsynonymous substitutions, were more likely to fractionate, and exhibited less similar expression patterns with their orthologs in the other species. Also, lower-expressed genes had greater tissue specificity. Orthologous conserved non-coding sequences in the promoters, introns, and 3' untranslated regions were less abundant at lower-expressed genes compared to their higher-expressed paralogs. A gene ontology (GO) term enrichment analysis showed that paralogs with similar expression levels were enriched in GO terms related to ribosomes, whereas paralogs with different expression levels were enriched in terms associated with stress responses. Loss of conserved non-coding sequences in one gene of a paralogous gene pair correlates with reduced expression levels that are more tissue specific. Together with increased mutation rates in the coding sequences, this suggests that similar forces of purifying selection act on coding and non-coding sequences. We propose that coding and non-coding sequences evolve concurrently following gene duplication.

Rate and selectivity modification in Fischer-Tropsch synthesis over charcoal supported molybdenum by forced concentration cycling

International Nuclear Information System (INIS)

Dun, J.W.; Gulari, E.

1985-01-01

Forced concentration cycling of the feed between pure CO and pure H/sub 2/ was used to successfully change both the selectivities and reactivities of promoted and unpromoted charcoal supported molybdenum catalysts in Fischer-Tropsch synthesis. It was found that with the unpromoted catalyst the rate enhancement increases with temperature and selectivity shifts towards methane. At the lower temperatures concentration cycling increases selectivity to ethane and higher hydrocarbons to levels only achievable with promised catalysts. Periodic operation with the potassium promoted catalyst results in small rate enhancements but the olefin to paraffin ratio is dramatically changed without changing the carbon number distribution

Functionalization of gold and nanocrystalline diamond atomic force microscope tips for single molecule force spectroscopy

Science.gov (United States)

Drew, Michael E.

The atomic force microscope (AFM) has fueled interest in nanotechnology because of its ability to image surfaces at the nanometer level and act as a molecular force sensor. Functionalization of the surface of an AFM tip surface in a stable, controlled manner expands the capabilities of the AFM and enables additional applications in the fields of single molecule force spectroscopy and nanolithography. Two AFM tip functionalizations are described: the assembly of tripodal molecular tips onto gold AFM tips and the photochemical attachment of terminal alkenes to nanocrystalline diamond (NCD) AFM tips. Two separate tripodal molecules with different linker lengths and a monopodal molecule terminated with biotin were synthesized to attach to a gold AFM tip for single molecule force spectroscopy. The immobilization of these molecules was examined by contact angle measurements, spectroscopic ellipsometry, infrared, and near edge x-ray absorption fine structure (NEXAFS) spectroscopy. All three molecules displayed rupture forces that agreed with previously reported values for the biotin--avidin rupture. The tripodal molecular tip displayed narrower distribution in their force histograms than the monopodal molecular tip. The performance of the tripodal molecular tip was compared to the monopodal molecular tip in single molecule force spectroscopy studies. Over repeated measurements, the distribution of forces for the monopodal molecular tip shifted to lower forces, whereas the distribution for the tripodal molecular tip remained constant throughout. Loading rate dependence and control experiments further indicated that the rupture forces of the tripod molecular tips were specific to the biotin--NeutrAvidin interaction. The second functionalization method used the photochemical attachment of undecylenic acid to NCD AFM tips. The photochemical attachment of undecylenic acid to hydrogen-terminated NCD wafer surfaces was investigated by contact angle measurements, x

Feature Selection and Predictors of Falls with Foot Force Sensors Using KNN-Based Algorithms

Directory of Open Access Journals (Sweden)

Shengyun Liang

2015-11-01

Full Text Available The aging process may lead to the degradation of lower extremity function in the elderly population, which can restrict their daily quality of life and gradually increase the fall risk. We aimed to determine whether objective measures of physical function could predict subsequent falls. Ground reaction force (GRF data, which was quantified by sample entropy, was collected by foot force sensors. Thirty eight subjects (23 fallers and 15 non-fallers participated in functional movement tests, including walking and sit-to-stand (STS. A feature selection algorithm was used to select relevant features to classify the elderly into two groups: at risk and not at risk of falling down, for three KNN-based classifiers: local mean-based k-nearest neighbor (LMKNN, pseudo nearest neighbor (PNN, local mean pseudo nearest neighbor (LMPNN classification. We compared classification performances, and achieved the best results with LMPNN, with sensitivity, specificity and accuracy all 100%. Moreover, a subset of GRFs was significantly different between the two groups via Wilcoxon rank sum test, which is compatible with the classification results. This method could potentially be used by non-experts to monitor balance and the risk of falling down in the elderly population.

Tragedy, transformation, and triumph: comparing the factors and forces that led to the adoption of the 1860 Adulteration Act in England and the 1906 Pure Food and Drug Act in the United States.

Science.gov (United States)

London, Jillian

2014-01-01

The 1860 Adulteration Act in England and the 1906 Pure Food and Drug Act in the United States were two of the earliest pieces of legislation to provide generalized regulation of food and drugs on a national scale. While significant scholarly attention has been given to explaining the factors and forces that led to the passage of each Act independent of the other, few books or articles have directly compared the similar individuals and events that led to the adoption of both Acts. This paper attempts to fill that gap. Through a comparative examination, this paper reveals that four main components were key to the national pure food and drug movements in both countries: individuals who crusaded for national adulteration legislation; tragedies that shocked the public into calling for reform; press and publicity that was willing and able to bring the evils of adulteration to the forefront of the public mind; and a transformation of the social, political, and economic systems, which created atmospheres conducive to reform. This paper aims to shed new light on the 1860 Adulteration Act and the 1906 Pure Food and Drug Act--two acts that derive their importance not just from the effect that they directly had on the regulation of food and drugs but also as some of the earliest examples of western governments coming to recognize the need for national regulation to protect the public from harm and coming to embrace their changing role as spearheads of modern regulatory states.

DelPhiForce web server: electrostatic forces and energy calculations and visualization.

Science.gov (United States)

Li, Lin; Jia, Zhe; Peng, Yunhui; Chakravorty, Arghya; Sun, Lexuan; Alexov, Emil

2017-11-15

Electrostatic force is an essential component of the total force acting between atoms and macromolecules. Therefore, accurate calculations of electrostatic forces are crucial for revealing the mechanisms of many biological processes. We developed a DelPhiForce web server to calculate and visualize the electrostatic forces at molecular level. DelPhiForce web server enables modeling of electrostatic forces on individual atoms, residues, domains and molecules, and generates an output that can be visualized by VMD software. Here we demonstrate the usage of the server for various biological problems including protein-cofactor, domain-domain, protein-protein, protein-DNA and protein-RNA interactions. The DelPhiForce web server is available at: http://compbio.clemson.edu/delphi-force. delphi@clemson.edu. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Evaluation of aerodynamic forces acting on oscillating cantilever beams based on the study of the damped flexural vibration of aluminium test samples

Science.gov (United States)

Egorov, A. G.; Kamalutdinov, A. M.; Nuriev, A. N.

2018-05-01

The paper is devoted to study of the aerodynamic forces acting on flat cantilever beams performing flexural vibrations in a viscous fluid. Original method for the force evaluation is presented based on analysis of experimental measurements of a logarithmic decrement of vibrations and relative variation in frequency of duralumin test specimens. The theoretical core of the method is based on the classical theory of bending beam oscillations and quasi-two dimensional model of interaction between a beam and a gas. Using the proposed method, extensive series of experiments for a wide range of oscillations parameters were carried out. The processing of the experimental data allowed to establish the global influence of the aerodynamic effects on beam oscillations and the local force characteristics of each cross-section of the beam in the form of universal functions of dimensionless amplitude and dimensionless frequency of oscillation. The obtained estimates of the drag and added mass forces showed a good correspondence with the available numerical and experimental data practically in the entire range of the investigated parameters.

The new Swiss Energy Act

International Nuclear Information System (INIS)

Tami, R.

1999-01-01

The new Swiss Energy Act and the accompanying regulation enable the instructions given in the poll by the electorate in 1990 -- the Energy Article in the Swiss Constitution -- to be implemented. The Energy Act creates the necessary basis for an advanced and sustainable energy policy. It should contribute to a sufficient, broadly based, dependable, economical and environment-friendly energy supply. The Energy Act and the Energy Regulation entered into force on January 1, 1999. (author)

Single acting translational/rotational brake

Science.gov (United States)

Allred, Johnny W. (Inventor); Fleck, Jr., Vincent J. (Inventor)

1996-01-01

A brake system is provided that applies braking forces on surfaces in both the translational and rotational directions using a single acting self-contained actuator that travels with the translational mechanism. The brake engages a mechanical lock and creates a frictional force on the translational structure preventing translation while simultaneously creating a frictional torque that prevents rotation of the vertical support. The system may include serrations on the braking surfaces to provide increased braking forces.

Identification and analysis of evolutionary selection pressures acting at the molecular level in five forkhead subfamilies.

Science.gov (United States)

Fetterman, Christina D; Rannala, Bruce; Walter, Michael A

2008-09-24

Members of the forkhead gene family act as transcription regulators in biological processes including development and metabolism. The evolution of forkhead genes has not been widely examined and selection pressures at the molecular level influencing subfamily evolution and differentiation have not been explored. Here, in silico methods were used to examine selection pressures acting on the coding sequence of five multi-species FOX protein subfamily clusters; FoxA, FoxD, FoxI, FoxO and FoxP. Application of site models, which estimate overall selection pressures on individual codons throughout the phylogeny, showed that the amino acid changes observed were either neutral or under negative selection. Branch-site models, which allow estimated selection pressures along specified lineages to vary as compared to the remaining phylogeny, identified positive selection along branches leading to the FoxA3 and Protostomia clades in the FoxA cluster and the branch leading to the FoxO3 clade in the FoxO cluster. Residues that may differentiate paralogs were identified in the FoxA and FoxO clusters and residues that differentiate orthologs were identified in the FoxA cluster. Neutral amino acid changes were identified in the forkhead domain of the FoxA, FoxD and FoxP clusters while positive selection was identified in the forkhead domain of the Protostomia lineage of the FoxA cluster. A series of residues under strong negative selection adjacent to the N- and C-termini of the forkhead domain were identified in all clusters analyzed suggesting a new method for refinement of domain boundaries. Extrapolation of domains among cluster members in conjunction with selection pressure information allowed prediction of residue function in the FoxA, FoxO and FoxP clusters and exclusion of known domain function in residues of the FoxA and FoxI clusters. Consideration of selection pressures observed in conjunction with known functional information allowed prediction of residue function and

Quantifying Selective Pressures Driving Bacterial Evolution Using Lineage Analysis

Science.gov (United States)

Lambert, Guillaume; Kussell, Edo

2015-01-01

Organisms use a variety of strategies to adapt to their environments and maximize long-term growth potential, but quantitative characterization of the benefits conferred by the use of such strategies, as well as their impact on the whole population's rate of growth, remains challenging. Here, we use a path-integral framework that describes how selection acts on lineages—i.e., the life histories of individuals and their ancestors—to demonstrate that lineage-based measurements can be used to quantify the selective pressures acting on a population. We apply this analysis to Escherichia coli bacteria exposed to cyclical treatments of carbenicillin, an antibiotic that interferes with cell-wall synthesis and affects cells in an age-dependent manner. While the extensive characterization of the life history of thousands of cells is necessary to accurately extract the age-dependent selective pressures caused by carbenicillin, the same measurement can be recapitulated using lineage-based statistics of a single surviving cell. Population-wide evolutionary pressures can be extracted from the properties of the surviving lineages within a population, providing an alternative and efficient procedure to quantify the evolutionary forces acting on a population. Importantly, this approach is not limited to age-dependent selection, and the framework can be generalized to detect signatures of other trait-specific selection using lineage-based measurements. Our results establish a powerful way to study the evolutionary dynamics of life under selection and may be broadly useful in elucidating selective pressures driving the emergence of antibiotic resistance and the evolution of survival strategies in biological systems.

75 FR 44724 - Agricultural Bioterrorism Protection Act of 2002; Biennial Review and Republication of the Select...

Science.gov (United States)

2010-07-29

... statutory mandate, PPQ and VS each convene separate interagency working groups in order to review the lists... responsibility for implementing the provisions of the Act within the Department of Agriculture (USDA). Veterinary Services (VS) select agents and toxins, listed in 9 CFR 121.3, are those that have been determined to have...

Numerical analysis of hydrodynamic forces acting on vertical lift gates; Analise dos esforcos hidrodinamicas em comportas hidraulicas

Energy Technology Data Exchange (ETDEWEB)

Andrade, Jell Lima de [Mecanica Pesada S.A., Taubate, SP (Brazil); Amorim, Jose Carlos Cesar [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil)]. E-mail: jcamorim@ime.eb.br

1997-07-01

A numerical analysis has been developed for calculating viscous flows controlled by a vertical lift gate and hydrodynamic forces acting on it. The numerical solution is obtained from the incompressible Navier-Stoles equations. The numerical techniques is based on a finite element method. A Poisson equation is derived from the pressure-weighted substitution of the full momentum equations into the continuity equation. Turbulence effects are simulated by a K-{epsilon} turbulence model. The procedure developed here is applied for a vertical lift gate operating in a CESP installation, and the results are compared with available experimental data at various opening positions. Good agreement is obtained for the velocity and pressure distributions. (author)

Ehrenfest force in inhomogeneous magnetic field

International Nuclear Information System (INIS)

Sisakyan, A.N.; Shevchenko, O.Yu.; Samojlov, V.N.

2000-01-01

The Ehrenfest force in an inhomogeneous magnetic field is calculated. It is shown that there exist such (very rare) topologically nontrivial physical situations when the Gauss theorem in its classic formulation fails and, as a consequence, apart from the usual Lorentz force an additional, purely imaginary force acts on the charged particle. This force arises only in inhomogeneous magnetic fields of special configurations, has a purely quantum origin, and disappears in the classical limit

Thermal creep force: analysis and application

OpenAIRE

Wolfe, David M.

2016-01-01

Approved for public release; distribution is unlimited The existence of two motive forces on a Crookes radiometer has complicated the investigation of either force independently. The thermal creep shear force, in particular, has been subject to differing interpretations of the direction in which it acts and its order of magnitude. A horizontal vane radiometer design is provided, which isolates the thermal creep shear force. The horizontal vane radiometer is explored through experiment, kin...

Activity and selectivity control through periodic composition forcing over Fischer-Tropsch catalysts

Energy Technology Data Exchange (ETDEWEB)

Silveston, P L; Hudgins, R R; Adesina, A A; Ross, G S; Feimer, J L

1986-01-01

Data collected under steady-state and periodic composition forcing of the Fischer-Tropsch synthesis over three commonly used catalysts demonstrate that both activity and selectivity can be changed by the latter operating mode. Synthesis of hydrocarbons up to C/sub 7/are favored at the expense of the higher carbon numbers for the Co catalyst, while for the Ru catalyst, only the C/sub 3/ and lower species are favored. Only methane production is stimulated with the Fe catalyst. Fe and Ru catalysts shift production from alkenes to alkanes. Transient data is interpreted in the paper.

Medição precisa das forças de aceleração em cabos Precise measurement of acceleration forces acting on cables

Directory of Open Access Journals (Sweden)

Edgar Moraes do Nascimento

1986-10-01

Full Text Available Certos problemas do uso do cinto de segurança ainda não foram resolvidos, sendo importante a determinação precisa das forças nos cabos. Existem vários métodos que, da maneira que são aplicados, são de pouca precisão. Com o objetivo de suspender essa imprecisão são apresentados três métodos e aperfeiçoado um outro de determinação da força exercida no cabo. Um desses métodos aplica-se a países subdesenvolvidos.Certain problems related to the use of safety belts remain unsolved, important among them being the exact determination of forces acting on cables. Various methods of calculation, severely limited because of the way in which they are applied, are presented. Three methods with a view to surpassing these limits are presented and another for the calculation of the forces acting on a cable is perfected. One of these methods is applicable in developing countries.

Repulsive Casimir-Polder forces from cosmic strings

International Nuclear Information System (INIS)

Saharian, A.A.; Kotanjyan, A.S.

2011-01-01

We investigate the Casimir-Polder force acting on a polarizable microparticle in the geometry of a straight cosmic string. In order to develop this analysis we evaluate the electromagnetic field Green tensor on the imaginary frequency axis. The expression for the Casimir-Polder force is derived in the general case of anisotropic polarizability. In dependence on the eigenvalues for the polarizability tensor and of the orientation of its principal axes, the Casimir-Polder force can be either repulsive or attractive. Moreover, there are situations where the force changes the sign with separation. We show that for an isotropic polarizability tensor the force is always repulsive. At large separations between the microparticle and the string, the force varies inversely with the fifth power of the distance. In the non-retarded regime, corresponding to separations smaller than the relevant transition wavelengths, the force decays with the inverse fourth power of the distance. In the case of anisotropic polarizability, the dependence of the Casimir-Polder potential on the orientation of the polarizability tensor principal axes also leads to a moment of force acting on the particle. (orig.)

Random three-dimensional jammed packings of elastic shells acting as force sensors

Science.gov (United States)

Jose, Jissy; van Blaaderen, Alfons; Imhof, Arnout

2016-06-01

In a jammed solid of granular particles, the applied stress is in-homogeneously distributed within the packing. A full experimental characterization requires measurement of all the interparticle forces, but so far such measurements are limited to a few systems in two and even fewer in three dimensions. Particles with the topology of (elastic) shells are good local force sensors as relatively large deformations of the shells result from relatively small forces. We recently introduced such fluorescent shells as a model granular system in which force distributions can be determined in three dimensions using confocal microscopy and quantitative image analysis. An interesting aspect about these shells that differentiates them from other soft deformable particles is their buckling behavior at higher compression. This leads to deformations that do not conserve the inner volume of the particle. Here we use this system to accurately measure the contact forces in a three-dimensional packing of shells subjected to a static anisotropic compression and to shear. At small deformations forces are linear, however, for a buckled contact, the restoring force is related to the amount of deformation by a square root law, as follows from the theory of elasticity of shells. Near the unjamming-jamming transition (point J ), we found the probability distribution of the interparticle forces P (f ) to decay nearly exponentially at large forces, with little evidence of long-range force chains in the packings. As the packing density is increased, the tail of the distribution was found to crossover to a Gaussian, in line with other experimental and simulation studies. Under a small shear strain, up to 0.216, applied at an extremely low shear rate, we observed a shear-induced anisotropy in both the pair correlation function and contact force network; however, no appreciable change was seen in the number of contacts per particle.

Facial expressions and speech acts: experimental evidences on the role of the upper face as an illocutionary force indicating device in language comprehension.

Science.gov (United States)

Domaneschi, Filippo; Passarelli, Marcello; Chiorri, Carlo

2017-08-01

Language scientists have broadly addressed the problem of explaining how language users recognize the kind of speech act performed by a speaker uttering a sentence in a particular context. They have done so by investigating the role played by the illocutionary force indicating devices (IFIDs), i.e., all linguistic elements that indicate the illocutionary force of an utterance. The present work takes a first step in the direction of an experimental investigation of non-verbal IFIDs because it investigates the role played by facial expressions and, in particular, of upper-face action units (AUs) in the comprehension of three basic types of illocutionary force: assertions, questions, and orders. The results from a pilot experiment on production and two comprehension experiments showed that (1) certain upper-face AUs seem to constitute non-verbal signals that contribute to the understanding of the illocutionary force of questions and orders; (2) assertions are not expected to be marked by any upper-face AU; (3) some upper-face AUs can be associated, with different degrees of compatibility, with both questions and orders.

Induced forces in the gravitational field

International Nuclear Information System (INIS)

Voracek, P.

1979-01-01

In this paper the expression for the magnitude of the so-called induced force, acting on a mass particle, is deduced. The origin of this force is causally connected to the increase of the rest mass of the particle in the gravitational field. (orig.)

Force measuring valve assemblies, systems including such valve assemblies and related methods

Science.gov (United States)

DeWall, Kevin George [Pocatello, ID; Garcia, Humberto Enrique [Idaho Falls, ID; McKellar, Michael George [Idaho Falls, ID

2012-04-17

Methods of evaluating a fluid condition may include stroking a valve member and measuring a force acting on the valve member during the stroke. Methods of evaluating a fluid condition may include measuring a force acting on a valve member in the presence of fluid flow over a period of time and evaluating at least one of the frequency of changes in the measured force over the period of time and the magnitude of the changes in the measured force over the period of time to identify the presence of an anomaly in a fluid flow and, optionally, its estimated location. Methods of evaluating a valve condition may include directing a fluid flow through a valve while stroking a valve member, measuring a force acting on the valve member during the stroke, and comparing the measured force to a reference force. Valve assemblies and related systems are also disclosed.

Maximal loads acting on legs of powered roof support unit in longwalls with bumping hazards

Institute of Scientific and Technical Information of China (English)

StanislawSzweda

2001-01-01

In the article the results of measurements of the resultant force in the legs of a powered roof support unit, caused by a dynamic interaction bf the rock mass, are discussed. The measurements have been taken in the Iongwalls mined with a roof fall, characterized by the highest degree of bumping hazard. It has been stated that the maximal force in the legs Fro, recorded during a dynamic interaction of the rock mass, is proportional to the initial static force in the legs Fst.p Therefore a need for a careful selection of the initial load of the powered roof support, according to the local mining and geological conditions, results from such a statement. Setting the legs with the supporting load exceeding the indispensable value for keeping the direct roof solids in balance, deteriorating the operational parameters of a Iongwall system also has a disadvantageous influence on the value of the force in the legs and the rate of its increase, caused by a dynamic interaction of the rock mass. A correct selection of the initial load causes a decrease in the intensity of a dynamic interaction of the rock mass on powered roof supports, which also has an advanta igeous influence on their life, Simultaneously with the measurements of the resultant force in the legs, the vertical acceleration of the canopy was also recorded. It has enabled to prove that the external dynamic forces may act on the unit both from the roof as well as from the floor. The changes of the force in the legs caused by dynamic phenomena intrinsically created in the roof and changes of the force in the legs caused by blasting explosives in the roof of the working, have been analyzed separately. It has been stated that an increase in the loads of legs, caused by intrinsic phenomena is significantly higher than a force increase in the legs caused by blasting. It means that powered roof supports, to be operated in the workings, where the bumping hazard occurs, will also transmit the loads acting on a unit

An Investigation of the Factors which Affect the Career Selection Process of Air Force Systems Command Company Grade Officers.

Science.gov (United States)

1979-12-01

faction, occupational preference, or the desirability of good performance . Proposition 2, as formulated by Vroom , predicts the force to act in a...Human Performance , 9: 482-503 (1973). Lewis, Logan M. "Expectancy Theory as a Predictive Model of Career Intent, Job Satisfaction , and Institution... Satisfaction , Effort, Performance , and Retention of Naval Aviation Officers," Organizational Behavior and Human Performance , 8: 1-20 (1972). 102 and Lee Roy

The Energy Act 1983

International Nuclear Information System (INIS)

1983-01-01

Part II of This Act came into force on 1 September 1983 and is concerned with nuclear installations. Its main purpose is to amend the Nuclear Installations Act 1965 to give effect to the provisions of two Protocols amending the Paris Convention on nuclear third party liability and the Brussels Convention Supplementary to the Paris Convention respectively. The principal effect of these modifications is to increase the sums available to meet claims for nuclear damage. The United Kingdom is a Party to both Conventions and the provisions of the 1983 Act will enable it to ratify the Protocols. (NEA) [fr

The location selection act or 'the Emperor's new clothes'

International Nuclear Information System (INIS)

Feldmann, Ulrike

2013-01-01

As is generally known, the governing parties CDU/CSU and FDP agreed a few weeks ago in the 17 th legislative period of the German Bundestag in a rare show of unanimity, together with the parties SPD and Buendnis 90/Die Gruenen, as well as with the Laender, on a 'law to search and select a location for a permanent disposal site for heat-generating radioactive waste products and to change other laws', in brief a location selection act also called StandAG. The law was received with animated approval from the ranks of the parties - with the exception of the (left-wing) party Die Linke. This praise is a tad bewildering, since the Bundesumweltministerium (Federal Department of the Environment) named solving the task within a single generation as one of the principles for the StandAG, and it was emphasised again and again in the debates about the StandAG that the problem of permanent disposal must not be shifted to the next generation. Conclusion: - The StandAG leads to a postponement of solving the permanent disposal site issue by a least several generations with its predictable, long-winded selection method. - The decision not to explore Gorleben conclusively could lead to the site being permanently ('wasted' or) 'burned'. - The de-central, interim disposal site Gorleben is likewise 'burned' without having a resilient alternative solution for the glass coquilles that must be taken back. - The people's protest is exponentiated by the number of the potential sites for the StandAG. - The costs for the alternative site search will not be shifted to the producers of the waste that are obliged by law to deliver the waste because of the financial provisions of the constitution. - The third party protection dogma has not been broken up, which will at least lead to delays in the procedure and will have effects on other major projects in the long run. (orig.)

Identification and analysis of evolutionary selection pressures acting at the molecular level in five forkhead subfamilies

Directory of Open Access Journals (Sweden)

Rannala Bruce

2008-09-01

Full Text Available Abstract Background Members of the forkhead gene family act as transcription regulators in biological processes including development and metabolism. The evolution of forkhead genes has not been widely examined and selection pressures at the molecular level influencing subfamily evolution and differentiation have not been explored. Here, in silico methods were used to examine selection pressures acting on the coding sequence of five multi-species FOX protein subfamily clusters; FoxA, FoxD, FoxI, FoxO and FoxP. Results Application of site models, which estimate overall selection pressures on individual codons throughout the phylogeny, showed that the amino acid changes observed were either neutral or under negative selection. Branch-site models, which allow estimated selection pressures along specified lineages to vary as compared to the remaining phylogeny, identified positive selection along branches leading to the FoxA3 and Protostomia clades in the FoxA cluster and the branch leading to the FoxO3 clade in the FoxO cluster. Residues that may differentiate paralogs were identified in the FoxA and FoxO clusters and residues that differentiate orthologs were identified in the FoxA cluster. Neutral amino acid changes were identified in the forkhead domain of the FoxA, FoxD and FoxP clusters while positive selection was identified in the forkhead domain of the Protostomia lineage of the FoxA cluster. A series of residues under strong negative selection adjacent to the N- and C-termini of the forkhead domain were identified in all clusters analyzed suggesting a new method for refinement of domain boundaries. Extrapolation of domains among cluster members in conjunction with selection pressure information allowed prediction of residue function in the FoxA, FoxO and FoxP clusters and exclusion of known domain function in residues of the FoxA and FoxI clusters. Conclusion Consideration of selection pressures observed in conjunction with known

Comparative study of wall-force models for the simulation of bubbly flows

Energy Technology Data Exchange (ETDEWEB)

Rzehak, Roland, E-mail: r.rzehak@hzdr.de [Helmholtz-Zentrum Dresden-Rossendorf (HZDR), Institute of Fluid Dynamics, POB 510119, D-01314 Dresden (Germany); Krepper, Eckhard, E-mail: E.Krepper@hzdr.de [Helmholtz-Zentrum Dresden-Rossendorf (HZDR), Institute of Fluid Dynamics, POB 510119, D-01314 Dresden (Germany); Lifante, Conxita, E-mail: Conxita.Lifante@ansys.com [ANSYS Germany GmbH, Staudenfeldweg 12, 83624 Otterfing (Germany)

2012-12-15

Highlights: Black-Right-Pointing-Pointer Comparison of common models for the wall force with an experimental database. Black-Right-Pointing-Pointer Identification of suitable closure for bubbly flow. Black-Right-Pointing-Pointer Enables prediction of location and height of wall peak in void fraction profiles. - Abstract: Accurate numerical prediction of void-fraction profiles in bubbly multiphase-flow relies on suitable closure models for the momentum exchange between liquid and gas phases. We here consider forces acting on the bubbles in the vicinity of a wall. A number of different models for this so-called wall-force have been proposed in the literature and are implemented in widely used CFD-codes. Simulations using a selection of these models are compared with a set of experimental data on bubbly air-water flow in round pipes of different diameter. Based on the results, recommendations on suitable closures are given.

32 CFR 806b.4 - Privacy Act complaints.

Science.gov (United States)

2010-07-01

... be identified, the local Privacy Act officer will assume these duties. Issues that cannot be resolved... 32 National Defense 6 2010-07-01 2010-07-01 false Privacy Act complaints. 806b.4 Section 806b.4 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ADMINISTRATION PRIVACY ACT...

Macroscopic QED in linearly responding media and a Lorentz-Force approach to dispersion forces

Energy Technology Data Exchange (ETDEWEB)

Raabe, Christian

2008-07-08

In this thesis, a very general quantization scheme for the macroscopic electromagnetic field in arbitrary linearly responding media is presented. It offers a unified approach to QED in such media. Applying the quantization scheme, a theory of the dispersion forces on the basis of the Lorentz force is developed. By regarding the dispersion force as the (ground-state or thermal-state) expectation value of the Lorentz force that acts on appropriately defined charge and current densities, Casimir, Casimir-Polder, and van der Waals forces are united in a very natural way that makes transparent their common physical basis. Application of the theory to planar structures yields generalizations of well-known Lifschitz and Casimir-type formulas. (orig.)

Macroscopic QED in linearly responding media and a Lorentz-Force approach to dispersion forces

International Nuclear Information System (INIS)

Raabe, Christian

2008-01-01

In this thesis, a very general quantization scheme for the macroscopic electromagnetic field in arbitrary linearly responding media is presented. It offers a unified approach to QED in such media. Applying the quantization scheme, a theory of the dispersion forces on the basis of the Lorentz force is developed. By regarding the dispersion force as the (ground-state or thermal-state) expectation value of the Lorentz force that acts on appropriately defined charge and current densities, Casimir, Casimir-Polder, and van der Waals forces are united in a very natural way that makes transparent their common physical basis. Application of the theory to planar structures yields generalizations of well-known Lifschitz and Casimir-type formulas. (orig.)

Wind and Current Forces Acting on Canadian Forces Ships During Tug Operations

Science.gov (United States)

2002-11-01

McTaggart and Sav- age [1] describe model tests conducted on a generic frigate model to determine wind forces influencing ship capsize. Van Manen and van ...Fn will be 0.06. Based on data presented by van Manen and van Oossanen [2], the fric- tional resistance coefficient will be approximately 0.002 and...Conference on Stability of Ships and Ocean Vehicles (Melbourne, Florida, 1994). 2. J.D. van Manen and P. van Oossanen, Principles of Naval Architecture, Volume

Novel parallel plate condenser for single particle electrostatic force measurements in atomic force microscope

KAUST Repository

Kwek, Jin Wang

2011-07-01

A combination of small parallel plate condenser with Indium Tin Oxide (ITO) glass slides as electrodes and an atomic force microscope (AFM) is used to characterize the electrostatic behavior of single glass bead microparticles (105-150 μm) glued to the AFM cantilever. This novel setup allows measurements of the electrostatic forces acting on a particle in an applied electrical field to be performed in ambient air conditions. By varying the position of the microparticle between the electrodes and the strength of the applied electric field, the relative contributions of the particle net charge, induced and image charges were investigated. When the microparticle is positioned in the middle of the electrodes, the force acting on the microparticle was linear with the applied electric field and proportional to the microparticle net charge. At distances close to the bottom electrode, the force follows a parabolic relationship with the applied electric field reflecting the contributions of induced and image charges. The method can be used for the rapid evaluation of the charging and polarizability properties of the microparticle as well as an alternative to the conventional Faraday\\'s pail technique. © 2011 Elsevier B.V.

Children's Typically-Perceived-Situations of Force and No Force in the Context of Australia and Korea

Science.gov (United States)

Joung, Yong Jae; Gunstone, Richard

2010-08-01

Typically-Perceived-Situation (TPS) refers to the situation rising spontaneously in an individual's mind when she/he first thinks of a phenomenon or concept. The purpose of this study is to go well beyond the many studies that describe conceptions of force and explore children's TPS of "force is acting on a thing" and "force is not acting on a thing", and to do this in the differing contexts of Australia and Korea. Data were collected by drawings and written explanations from 145 Grade 6 Australian children and 150 Grade 6 Korean children. These data showed some significant differences between the Australian children's and Korean children's TPSs. For example, considering the whole context of children's TPS, the contexts of "someone pushes or pulls something" and "someone/something is floating in the air or not moving because there is no gravity" were the most frequent ones, as a "force" and as a "no force" situation respectively, in the case of Australian children, while "a sort of energy is provided into someone/something and they can be active/working" and "a sort of energy is not provided into someone/something and they cannot be active/working", were most frequent in the case of Korean children. These differences are very likely the consequence of different everyday meanings for the word "force" in the two cultures. In addition, it appears that these children's TPS affect their judgement of "force" and "no force".

Wind Forces on Container Ships

DEFF Research Database (Denmark)

Andersen, Ingrid Marie Vincent

2012-01-01

An investigation of the wind forces acting on a 9,000+ TEU container ship has been carried out through a series of wind tunnel tests. It was investigated how the wind forces depend on the container configuration on the deck using a 1:450 scale model and a series of appropriate container...... are presented as nondimensional coefficients. It is concluded, that the measured forces and moment depend on the container configuration on deck, and the results may provide a general idea of how the magnitude of the wind forces is affected by a given container stacking configuration on a similar container ship....

77 FR 30871 - Implementing the Prison Rape Elimination Act

Science.gov (United States)

2012-05-23

...--Implementing the Prison Rape Elimination Act Proclamation 8823--Armed Forces Day, 2012 #0; #0; #0; Presidential... Prison Rape Elimination Act Memorandum for the Heads of Executive Departments and Agencies Sexual... Rape Elimination Act of 2003 (PREA) was enacted with bipartisan support and established a ``zero...

Act of 21 February 1963, Stb. 82, concerning the release of nuclear energy and the use of radioactive materials and of devices emitting ionizing radiations (Nuclear Energy Act) as amended by the Act of 30 June 1967, Stb. 337, and the Act of 8 May 1974, Stb. 291

International Nuclear Information System (INIS)

1963-01-01

This basic Act governs all nuclear activities in the Netherlands and determines the Government's competence and the obligations of those involved in the nuclear field. It establishes definitions and sets up bodies to advise the Government in the different nuclear sectors and covers nuclear installations, fissionable materials, ores, radioactive materials, radiation-emitting devices and their licensing. It was brought into force progressively by decrees made in implementation of its provisions, which lay down detailed regulations for the activity concerned. The chapters of the Act not yet in force were brought into operation on 1 January 1970 by the Nuclear Energy Act (Implantation) Decree of 12 November 1969. (NEA) [fr

Improved social force model based on exit selection for microscopic pedestrian simulation in subway station

Institute of Scientific and Technical Information of China (English)

郑勋; 李海鹰; 孟令云; 许心越; 陈旭

2015-01-01

An improved social force model based on exit selection is proposed to simulate pedestrians’ microscopic behaviors in subway station. The modification lies in considering three factors of spatial distance, occupant density and exit width. In addition, the problem of pedestrians selecting exit frequently is solved as follows: not changing to other exits in the affected area of one exit, using the probability of remaining preceding exit and invoking function of exit selection after several simulation steps. Pedestrians in subway station have some special characteristics, such as explicit destinations, different familiarities with subway station. Finally, Beijing Zoo Subway Station is taken as an example and the feasibility of the model results is verified through the comparison of the actual data and simulation data. The simulation results show that the improved model can depict the microscopic behaviors of pedestrians in subway station.

Modeling forces in high-temperature superconductors

International Nuclear Information System (INIS)

Turner, L. R.; Foster, M. W.

1997-01-01

We have developed a simple model that uses computed shielding currents to determine the forces acting on a high-temperature superconductor (HTS). The model has been applied to measurements of the force between HTS and permanent magnets (PM). Results show the expected hysteretic variation of force as the HTS moves first toward and then away from a permanent magnet, including the reversal of the sign of the force. Optimization of the shielding currents is carried out through a simulated annealing algorithm in a C++ program that repeatedly calls a commercial electromagnetic software code. Agreement with measured forces is encouraging

Exploring the role of motivational and coping resources in a Special Forces selection process

Directory of Open Access Journals (Sweden)

Marié de Beer

2014-07-01

Research purpose: The purpose was to compare selected and not-selected candidates in terms of their sense of coherence, hardiness, locus of control and self-efficacy and to explore what they considered important for success in the selection process. Motivation for the study: Because of high attrition rates in Special Forces selection, the evaluation of the role of motivation and coping resources in terms of possible predictive utility could benefit the organisation from a logistical, financial and efficiency point of view. Research design, approach and method: A mixed-method cross-sectional survey design was used to assess an all-male candidate group (N = 73. The selected and not-selected groups were compared with regard to their sense of coherence, hardiness, locus of control and self-efficacy mean scores. Main findings: No statistically significant differences were found between the mean scores of the two groups concerning the quantitative measures used. Practical/managerial implications: The quantitative measures generally showed acceptable coefficient alpha reliabilities. Although no statistically significant mean differences were found between the groups, candidates showed high levels of sense of coherence, high levels of self-efficacy and average levels of hardiness and internal locus of control. The qualitative data confirmed the relevance of the quantitative constructs and pointed to additional aspects already considered in preparation for and during the selection process. Contribution/value-add: The results provide information regarding the constructs and measures used in a military context.

Environmental Assessment for Proposed Security Forces Operations Facility, Buckley Air Force Base, Colorado

National Research Council Canada - National Science Library

Meyer, Elizabeth; Myklebust, Jessica; Denier, James; Christner, Jennifer; Fontaine, Kathyrn

2006-01-01

The United States Air Force (USAF) has prepared this EA in accordance with the National Environmental Policy Act to evaluate the potential environmental and social impacts from the construction and operation of the proposed SFOF...

Crossflow-induced vibrations of tube banks: hydrodynamic forces and mathematical models

International Nuclear Information System (INIS)

Chen, S.S.

1977-01-01

The objective of this paper is to present a method of analysis for the hydrodynamic forces acting on tube banks and a mathematical model for multiple tubes and multiple excitation mechanisms incorporating tube/fluid coupling. The hydrodynamic forces acting on tube banks are analyzed using the two dimensional potential flow theory

Multivariate stability of force-reflecting teleoperation: Structures of finite and infinite zeros

International Nuclear Information System (INIS)

Daniel, R.W.; McAree, P.R.

2000-01-01

This paper presents a stability analysis of force-position teleoperation under general end-effector contact. The analysis is based on the finite and infinite zero structure of the multivariable root-locus resulting from modulation of the environment stiffness. The starting point is an analysis of the stability of robot force control, motivated by the observation that the human-operator in a force reflection loop acts as a force servo, generating position commands in response to reflected force. Asymptotic root loci properties are used to establish passivity conditions on force feedback to give root locus interpretations of the well-known results that (1) feedback via the inverse joint Jacobian can lead to (kinematic) instability and that (2) passivity is preserved by kinematically proper force feedback through the transpose of the joint angle Jacobian. It is demonstrated that a fully constrained force-position teleoperation loop has an identical infinite zero structure to that of a slave manipulation under kinematically proper force control and that the dominant vibration modes of a force-position loop are fully described by a multivariable analogue of the single-input single-output pseudo-system investigated in a study by Daniel and McAree. Extension of the analysis to cover partial end-effector constraint provides a design tool for teleoperation control and serves to aid selection of teleoperation slate-arms. The paper concludes by giving a passivity condition for multiple-input multiple-output force-position teleoperation for stable contact against all environments

Casimir-lifshitz force out of thermal equilibrium and asymptotic nonadditivity

NARCIS (Netherlands)

Antezza, Mauro; Pitaevskii, Lev P.; Stringari, Sandro; Svetovoy, Vitaly

2006-01-01

We investigate the force acting between two parallel plates held at different temperatures. The force reproduces, as limiting cases, the well-known Casimir-Lifshitz surface-surface force at thermal equilibrium and the surface-atom force out of thermal equilibrium recently derived by M. Antezza et

Atomic Energy Authority Act 1986

International Nuclear Information System (INIS)

1986-01-01

Under this Act the UKAEA is given power to borrow so that it can finance its capital expenditure programme, and will undertake a debt to the Secretary of State for Energy representing its assets. Power is given for the Government to guarantee such borrowing. The UKAEA has been organised financially on the basis of a trading fund. The Act came into force on 1 April 1986. (NEA) [fr

Maximal loads acting on legs of powered roof support unit in longwalls with bumping hazards

Institute of Scientific and Technical Information of China (English)

Stanislaw Szweda

2001-01-01

In the article the results of measurements of the resultant force in th e legs of a powered roof support unit, caused by a dynamic interaction of the ro ck mass, are discussed. The measurements have been taken in the longwalls mined with a roof fall, characterized by the highest degree of bumping hazard. It has been stated that the maximal force in the legs Fm, recorded during a dynam ic interaction of the rock mass, is proportional to the initial static force in the legs Fst,p. Th erefore a need for a careful selection of the initial load of the powered roof s upport, according to the local mining and geological conditions, results from su ch a statement. Setting the legs with the supporting load exceeding the indispen sable value for keeping the direct roof solids in balance, deteriorating the ope rational parameters of a longwall system also has a disadvantageous influence on the value of the force in the legs and the rate of its increase, caused by a dy namic interaction of the rock mass. A correct selection of the initial load caus es a decrease in the intensity of a dynamic interaction of the rock mass on powe red roof supports, which also has an advantageous influence on their life. 　　Simultaneously with the measurements of the resultant force in the legs, the vertical acceleration of the canopy was also recorded. It has enabled to prove that the exte rnal dynamic forces may act on the unit both from the roof as well as from the f loor. The changes of the force in the legs caused by dynamic phenomena intrinsic ally created in the roof and changes of the force in the legs caused by blasting explosives in the roof of the working, have been analyzed separately. It has been stated that an increase in the loads of legs, caused by intrinsi c phenomena is significantly higher than a force increase in the legs caused by blasting. It means that powered roof supports, to be operated in the workings, w here the bumping hazard occurs, will also transmit the loads

The Motor and the Brake of the Trailing Leg in Human Walking: Leg Force Control Through Ankle Modulation and Knee Covariance

Science.gov (United States)

Toney, Megan E.; Chang, Young-Hui

2016-01-01

Human walking is a complex task, and we lack a complete understanding of how the neuromuscular system organizes its numerous muscles and joints to achieve consistent and efficient walking mechanics. Focused control of select influential task-level variables may simplify the higher-level control of steady state walking and reduce demand on the neuromuscular system. As trailing leg power generation and force application can affect the mechanical efficiency of step-to-step transitions, we investigated how joint torques are organized to control leg force and leg power during human walking. We tested whether timing of trailing leg force control corresponded with timing of peak leg power generation. We also applied a modified uncontrolled manifold analysis to test whether individual or coordinated joint torque strategies most contributed to leg force control. We found that leg force magnitude was adjusted from step-to-step to maintain consistent leg power generation. Leg force modulation was primarily determined by adjustments in the timing of peak ankle plantar-flexion torque, while knee torque was simultaneously covaried to dampen the effect of ankle torque on leg force. We propose a coordinated joint torque control strategy in which the trailing leg ankle acts as a motor to drive leg power production while trailing leg knee torque acts as a brake to refine leg power production. PMID:27334888

Properties of pseudo magnetism acting between bodies

Directory of Open Access Journals (Sweden)

Anish Deva

Full Text Available A non-contact force has been found to be always acting between two bodies kept close to each other in different media. The properties of the force are different as compared to other non-contact forces such as gravitation and electrostatics, as was shown in our previous work. The aim of this paper is to find how the force behaves when two objects are brought near each other, one being completely immersed in the medium and the other kept just outside. The magnitude of the force in each medium has been calculated through experiments and then compared with each other. The discrepancies obtained between these magnitudes (10−5 N in water and 10−6 N in engine oil and the varied oscillation patterns (amplitude and frequency obtained from graphs have shown that the force behaves differently with different media. In general, the frequency of the force has been found to be of the order 10−2 Hz. The behaviour has also been found to depend on the nature of the material and shape of the object. This correlation has been ascertained by using a Gauss meter to measure the force acting between two objects and also that of an individual object. The polarity of the force i.e. whether attractive or repulsive, has been found to vary across the length of the objects and graphs have been plotted to demonstrate this property. Keywords: Non-contact force, Medium, Magnetism, Gravitation, Frequency

The Strength and Drivers of Bird-Mediated Selection on Fruit Crop Size: A Meta-Analysis

Directory of Open Access Journals (Sweden)

Facundo X. Palacio

2018-02-01

Full Text Available In seed-dispersal mutualisms, the number of fruit a plant displays is a key trait, as it acts as a signal for seed dispersers that entails fruit removal and exportation of reproductive units (fruit crop size hypothesis. Although this hypothesis has gained general acceptance, forces driving the shape and strength of natural selection exerted by birds on fruit crop size remains an unresolved matter. Here, we propose that ecological filters promoting high functional equivalence of interacting partners (similar functional roles translate into similar selection pressures on fruit crop size, enhancing selection strength on this trait. We performed a meta-analysis on 50 seed-dispersal systems to test the hypothesis that frugivorous birds exert positive selection pressure on fruit crop size, and to assess whether different factors expected to act as filters (fruit diameter, fruit type, fruiting season length, bird functional groups, and latitude influence phenotypic selection regimes on this trait. Birds promote larger fruit crop sizes as a general pattern in nature. Short fruiting seasons and a high proportion of species belonging to the same functional group showed higher selection strength on fruit crop size. Also, selection strength on fruit crop size increased for large-fruited species and toward the tropics. Our results support the hypothesis that fruit crop size represents a conspicuous signal advertising the amount of reward to visually driven interacting partners, and that both plant and bird traits, as well as environmental factors, drive selection strength on fruit display traits. Furthermore, our results suggest that the relationship among forces impinged by phenology and frugivore functional roles may be key to understand their evolutionary stability.

Force acting on a spherical bubble rising through a quiescent liquid

International Nuclear Information System (INIS)

Takagi, Shu; Matsumoto, Yoichiro

1996-01-01

The direct numerical simulation is performed on the spherical bubble unsteadily rising through a quiescent liquid. The method is based on a finite-volume solution of the equations on an orthogonal curvilinear coordinate system. The calculations are performed for a bubble rising through a clean liquid and contaminated one. Following the former experimental results, the tangential stress free condition is given for a clean bubble, and no-slip condition for contaminated one. The numerical results are compared with those of the model equation of the translational motion of the bubble, which is often used in numerical models of a bubbly flow. The steady drag, added mass and history terms are checked up by the comparison. It is revealed that the history force effect is negligible for a bubble rising through the clean liquid beyond Re=O(50). From the numerical point of view, the fact that the history force is negligible is quite important, because it reduces the calculation time and memory for a bubbly flow model. For a contaminated bubble, history force effect is not negligible even though the Reynolds number is high enough. It is found that the expression of the history force by Basset kernel gives an over-estimation of the history force for the bubble rising at moderate Reynolds number. This error becomes larger with increasing Reynolds number and it reduces the accuracy to calculate the bubble motion by the model equation. (author)

NUMBER OF SUCCESSIVE CYCLES NECESSARY TO ACHIEVE STABILITY OF SELECTED GROUND REACTION FORCE VARIABLES DURING CONTINUOUS JUMPING

Directory of Open Access Journals (Sweden)

Jasmes M.W. Brownjohn

2009-12-01

Full Text Available Because of inherent variability in all human cyclical movements, such as walking, running and jumping, data collected across a single cycle might be atypical and potentially unable to represent an individual's generalized performance. The study described here was designed to determine the number of successive cycles due to continuous, repetitive countermovement jumping which a test subject should perform in a single experimental session to achieve stability of the mean of the corresponding continuously measured ground reaction force (GRF variables. Seven vertical GRF variables (period of jumping cycle, duration of contact phase, peak force amplitude and its timing, average rate of force development, average rate of force relaxation and impulse were extracted on the cycle-by-cycle basis from vertical jumping force time histories generated by twelve participants who were jumping in response to regular electronic metronome beats in the range 2-2.8 Hz. Stability of the selected GRF variables across successive jumping cycles was examined for three jumping rates (2, 2.4 and 2.8 Hz using two statistical methods: intra-class correlation (ICC analysis and segmental averaging technique (SAT. Results of the ICC analysis indicated that an average of four successive cycles (mean 4.5 ± 2.7 for 2 Hz; 3.9 ± 2.6 for 2.4 Hz; 3.3 ± 2.7 for 2.8 Hz were necessary to achieve maximum ICC values. Except for jumping period, maximum ICC values took values from 0.592 to 0.991 and all were significantly (p < 0.05 different from zero. Results of the SAT revealed that an average of ten successive cycles (mean 10.5 ± 3.5 for 2 Hz; 9.2 ± 3.8 for 2.4 Hz; 9.0 ± 3.9 for 2.8 Hz were necessary to achieve stability of the selected parameters using criteria previously reported in the literature. Using 10 reference trials, the SAT required standard deviation criterion values of 0.49, 0.41 and 0.55 for 2 Hz, 2.4 Hz and 2.8 Hz jumping rates, respectively, in order to approximate

Flextime: A Modified Work Force Scheduling Technique for Selected Headquarters Air Force Logistics Command Organizations.

Science.gov (United States)

Kimzey, Reed T.; Prince, Samuel M. O.

The thesis discusses the advantages and disadvantages of one work force scheduling technique--flextime. The authors were interested in determining if a flextime schedule could be put into effect in a governmental organization such as Headquarters Air Force Logistics Command (AFLC). The study objectives were to determine the feasibility,…

A brief history of the Coriolis force

NARCIS (Netherlands)

Gerkema, T.; Gostiaux, L.

2012-01-01

In 1835, Gustave Coriolis derived the expression of a force acting in rotating systems, now known as the Coriolis force. His work was inspired by rotating devices such as waterwheels. However, the onerotating device that has always been with us is the Earth itself. Indeed, the earliest studies on

Mathematical modelling and numerical simulation of forces in milling process

Science.gov (United States)

Turai, Bhanu Murthy; Satish, Cherukuvada; Prakash Marimuthu, K.

2018-04-01

Machining of the material by milling induces forces, which act on the work piece material, tool and which in turn act on the machining tool. The forces involved in milling process can be quantified, mathematical models help to predict these forces. A lot of research has been carried out in this area in the past few decades. The current research aims at developing a mathematical model to predict forces at different levels which arise machining of Aluminium6061 alloy. Finite element analysis was used to develop a FE model to predict the cutting forces. Simulation was done for varying cutting conditions. Different experiments was designed using Taguchi method. A L9 orthogonal array was designed and the output was measure for the different experiments. The same was used to develop the mathematical model.

Selection of flow-distributed oscillation and Turing patterns by boundary forcing in a linearly growing, oscillating medium.

Science.gov (United States)

Míguez, David G; McGraw, Patrick; Muñuzuri, Alberto P; Menzinger, Michael

2009-08-01

We studied the response of a linearly growing domain of the oscillatory chemical chlorine dioxide-iodide-malonic acid (CDIMA) medium to periodic forcing at its growth boundary. The medium is Hopf-, as well as Turing-unstable and the system is convectively unstable. The results confirm numerical predictions that two distinct modes of pattern can be excited by controlling the driving frequency at the boundary, a flow-distributed-oscillation (FDO) mode of traveling waves at low values of the forcing frequency f , and a mode of stationary Turing patterns at high values of f . The wavelengths and phase velocities of the experimental patterns were compared quantitatively with results from dynamical simulations and with predictions from linear dispersion relations. The results for the FDO waves agreed well with these predictions, and obeyed the kinematic relations expected for phase waves with frequencies selected by the boundary driving frequency. Turing patterns were also generated within the predicted range of forcing frequencies, but these developed into two-dimensional structures which are not fully accounted for by the one-dimensional numerical and analytical models. The Turing patterns excited by boundary forcing persist when the forcing is removed, demonstrating the bistability of the unforced, constant size medium. Dynamical simulations at perturbation frequencies other than those of the experiments showed that in certain ranges of forcing frequency, FDO waves become unstable, breaking up into harmonic waves of different frequency and wavelength and phase velocity.

The mathematics of random mutation and natural selection for multiple simultaneous selection pressures and the evolution of antimicrobial drug resistance.

Science.gov (United States)

Kleinman, Alan

2016-12-20

The random mutation and natural selection phenomenon act in a mathematically predictable behavior, which when understood leads to approaches to reduce and prevent the failure of the use of these selection pressures when treating infections and cancers. The underlying principle to impair the random mutation and natural selection phenomenon is to use combination therapy, which forces the population to evolve to multiple selection pressures simultaneously that invoke the multiplication rule of probabilities simultaneously as well. Recently, it has been seen that combination therapy for the treatment of malaria has failed to prevent the emergence of drug-resistant variants. Using this empirical example and the principles of probability theory, the derivation of the equations describing this treatment failure is carried out. These equations give guidance as to how to use combination therapy for the treatment of cancers and infectious diseases and prevent the emergence of drug resistance. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Scrambled eggs: mechanical forces as ecological factors in early development.

Science.gov (United States)

Moore, Steven W

2003-01-01

Many ecological interactions involve, at some level, mechanical forces and the movements or structural deformations they produce. Although the most familiar examples involve the functional morphology of adult structures, all life history stages (not just the adults) are subject to the laws of physics. Moreover, the success of every lineage depends on the success of every life history stage (again, not just the adults). Therefore, insights gained by using mechanical engineering principles and techniques to study ecological interactions between gametes, embryos, larvae, and their environment are essential to a well-rounded understanding of development, ecology, and evolution. Here I draw on examples from the literature and my own research to illustrate ways in which mechanical forces in the environment shape development. These include mechanical forces acting as selective factors (e.g., when coral gamete size and shape interact with turbulent water flow to determine fertilization success) and as developmental cues (e.g., when plant growth responds to gravity or bone growth responds to mechanical loading). I also examine the opposite cause-and-effect relationship by considering examples in which the development of organisms impacts ecologically relevant mechanical forces. Finally, I discuss the potential for ecological pattern formation as a result of feedback loops created by such bidirectional interactions between developmental processes and mechanical forces in the environment.

Atomic Energy Act 1989

International Nuclear Information System (INIS)

1989-05-01

This Act, which entered into force on 1 september 1989, contains a series of provisions dealing with different subjects: increase of public financing for British Nuclear Fuels plc, amendment of the Nuclear Installations Act 1965 regarding the powers of the Health and Safety Executive to recover expenses directly from nuclear operators and obligation of the UKAEA to take out insurance or other financial security to cover its liability and finally, measures to enable the UK to ratify the IAEA Convention on Assistance in Case of a Nuclear Accident or Radiological Emergency [fr

Balancing Professional Standards and Political Discretion in Selecting Top Officials in Slovenia

Directory of Open Access Journals (Sweden)

Polonca KOVAČ

2013-10-01

Full Text Available One of the key drivers of modern and efficient public administration under the good governance doctrine is an efficient top officials’ selection system. A targeted selection and recruitment system is a prerequisite for the whole administration to act in compliance with the political priorities of the government. However, civil servants and top officials alike must put professional competencies above political loyalty. Therefore, a new system was introduced in Slovenia following the 2003 Civil Servants Act, aimed at ensuring professionalism against (overpoliticization of public administration. A research carried out in 2012 among candidates and selected top officials and ministers, as their political superiors, revealed an overall efficiency of the Slovenian selection scheme in the sense of restricted over-politicization and increased professionalism. Its outcomes lead to the conclusion that the selection system in Slovenia, owing to its two-phase professional and political selection, is most adequate in terms of both regulation and practice since it takes into account the twofold role of top officials and civil service or public administration as a whole (first, as a force providing professional solutions by ensuring legality and efficient resource management, and second, as the closest collaborators of the political leadership implementing government policies.

Variable Thumb Moment Arm Modeling and Thumb-Tip Force Production of a Human-Like Robotic Hand.

Science.gov (United States)

Niehues, Taylor D; Deshpande, Ashish D

2017-10-01

The anatomically correct testbed (ACT) hand mechanically simulates the musculoskeletal structure of the fingers and thumb of the human hand. In this work, we analyze the muscle moment arms (MAs) and thumb-tip force vectors in the ACT thumb in order to compare the ACT thumb's mechanical structure to the human thumb. Motion data are used to determine joint angle-dependent MA models, and thumb-tip three-dimensional (3D) force vectors are experimentally analyzed when forces are applied to individual muscles. Results are presented for both a nominal ACT thumb model designed to match human MAs and an adjusted model that more closely replicates human-like thumb-tip forces. The results confirm that the ACT thumb is capable of faithfully representing human musculoskeletal structure and muscle functionality. Using the ACT hand as a physical simulation platform allows us to gain a better understanding of the underlying biomechanical and neuromuscular properties of the human hand to ultimately inform the design and control of robotic and prosthetic hands.

The Carriage of goods by Sea Act 1971 (Commencement, Order 1977)

International Nuclear Information System (INIS)

1977-01-01

This Order (S.I. No 981) brought into force the Carriage of Goods by Sea Act 1971 giving effect at internal level to the 1968 Protocol to the International Convention on Certain Rules of Law relating to Bills of Lading 1924 (the Hague Rules). The 1971 Act introduces an amendment to the Nuclear Installations Act 1965 which lays down, as does the Paris Convention, that none of its provisions shall affect the operation of international transport agreements in force in the United Kingdom, and in particular, the Hague Rules. As of now, and in accordance with the 1968 Protocol, the Nuclear Installations Act 1965 no longer reserves application of the Hague Rules. (NEA) [fr

Atomic Energy Authority (Weapons Group) Act 1973

International Nuclear Information System (INIS)

1973-01-01

This Act, which came into force on 6th March 1973 and modified Section 2 of the Atomic Energy Authority Act 1954 in respect of the Authority's power to do work on explosive nuclear devices, made provision for the transfer to the Secretary of State for Defence of the Weapons Group of the Atomic Energy Authority. (NEA) [fr

Variability of peak shoulder force during wheelchair propulsion in manual wheelchair users with and without shoulder pain.

Science.gov (United States)

Moon, Y; Jayaraman, C; Hsu, I M K; Rice, I M; Hsiao-Wecksler, E T; Sosnoff, J J

2013-01-01

Manual wheelchair users report a high prevalence of shoulder pain. Growing evidence shows that variability in forces applied to biological tissue is related to musculoskeletal pain. The purpose of this study was to examine the variability of forces acting on the shoulder during wheelchair propulsion as a function of shoulder pain. Twenty-four manual wheelchair users (13 with pain, 11 without pain) participated in the investigation. Kinetic and kinematic data of wheelchair propulsion were recorded for 3 min maintaining a constant speed at three distinct propulsion speeds (fast speed of 1.1 m/s, a self-selected speed, and a slow speed of 0.7 m/s). Peak resultant shoulder forces in the push phase were calculated using inverse dynamics. Within individual variability was quantified as the coefficient of variation of cycle to cycle peak resultant forces. There was no difference in mean peak shoulder resultant force between groups. The pain group had significantly smaller variability of peak resultant force than the no pain group (Ppropulsion variability could be a novel marker of upper limb pain in manual wheelchair users. © 2013.

Effects of one-night sleep deprivation on selective attention and isometric force in adolescent karate athletes.

Science.gov (United States)

Ben Cheikh, Ridha; Latiri, Imed; Dogui, Mohamed; Ben Saad, Helmi

2017-06-01

Most of the available literature related to aspects of sleep deprivation is primarily focused on memory and learning, and studies regarding its effects on selective attention and/or physical performance are scarce. Moreover, the available literature includes general population or people involved in team sports (e.g. volleyball). However, only few studies were performed on athletes involved in combat sports (e.g. karate). The aim of the present study was to determine the effects of a total one-night sleep deprivation (1NSD) on activation and inhibition processes of selective attention and on maximal isometric force in karate athletes. Twelve young karate athletes (mean age 16.9±0.8 years) were enrolled. The protocol consists of two successive sessions: a normal night's sleep (NNS) and a total 1NSD. After each night, athletes performed selective attention and muscle strength tests during the same following three times (T) of the day: T1NNS or T11NSD: 8-9 a.m.; T2NNS or T21NSD: 12 a.m.-1 p.m.; T3NNS or T31NSD: 4-5 p.m. Activation (simple [SRT] and choice reaction times [CRT]) and inhibition (negative priming) processes were evaluated using Superlab v. 4.5 software (Cedrus Corporation, San Pedro, CA, USA). Maximal force and maximal force time (MFT) of brachial biceps isometric contraction were evaluated (Ergo System®, Globus, Codognè, Italy). A non-parametric test was used to evaluate the sessions (NNS vs. SND for the same time period) and time (T1NNS vs. 1NSD) effects. All athletes completed all tests after a NNS. Twelve, eleven and four athletes completed all tests at T11NSD, T21NSD and T31NSD, respectively. As for sessions effects, no statistically significant difference was found. As for time effects, a significant increase in SRT at T21NSD vs. T1NNS (345±47 vs. 317±33 ms, respectively), a significant increase in MFT at T21NSD vs. T1NNS (2172±260 vs.1885±292 ms, respectively), and no significant changes in CRT and negative priming reaction time or MFT data

The Social Support Act: the story so far

NARCIS (Netherlands)

Mirjam de Klerk; Rob Gilsing; Joost Timmermans

2010-01-01

Original title: Op weg met de Wmo. The Social Support Act (Wet maatschappelijke ondersteuning - Wmo) came into force in the Netherlands on 1 January 2007. The aim of the Act is to promote people's social and life skills and ability to participate, and to strengthen social cohesion and quality

QUANTITATIVE GENETICS OF MORPHOLOGICAL DIFFERENTIATION IN PEROMYSCUS. II. ANALYSIS OF SELECTION AND DRIFT.

Science.gov (United States)

Lofsvold, David

1988-01-01

The hypothesis that the morphological divergence of local populations of Peromyscus is due to random genetic drift was evaluated by testing the proportionality of the among-locality covariance matrix, L, and the additive genetic covariance matrix, G. Overall, significant proportionality of L̂ and Ĝ was not observed, indicating the evolutionary divergence of local populations does not result from random genetic drift. The forces of selection needed to differentiate three taxa of Peromyscus were reconstructed to examine the divergence of species and subspecies. The selection gradients obtained illustrate the inadequacy of univariate analyses of selection by finding that some characters evolve in the direction opposite to the force of selection acting directly on them. A retrospective selection index was constructed using the estimated selection gradients, and truncation selection on this index was used to estimate the minimum selective mortality per generation required to produce the observed change. On any of the time scales used, the proportion of the population that would need to be culled was quite low, the greatest being of the same order of magnitude as the selective intensities observed in extant natural populations. Thus, entirely plausible intensities of directional natural selection can produce species-level differences in a period of time too short to be resolved in the fossil record. © 1988 The Society for the Study of Evolution.

Further investigation on "A multiplicative regularization for force reconstruction"

Science.gov (United States)

Aucejo, M.; De Smet, O.

2018-05-01

We have recently proposed a multiplicative regularization to reconstruct mechanical forces acting on a structure from vibration measurements. This method does not require any selection procedure for choosing the regularization parameter, since the amount of regularization is automatically adjusted throughout an iterative resolution process. The proposed iterative algorithm has been developed with performance and efficiency in mind, but it is actually a simplified version of a full iterative procedure not described in the original paper. The present paper aims at introducing the full resolution algorithm and comparing it with its simplified version in terms of computational efficiency and solution accuracy. In particular, it is shown that both algorithms lead to very similar identified solutions.

Against acts of nuclear terrorism

International Nuclear Information System (INIS)

Heller, W.

2007-01-01

The Act on the International Convention of the United Nations of April 13, 2005 on Combating Acts of Nuclear Terrorism was promulgated in the German Federal Gazette and entered into force one day later. The Convention expresses the deep concern about the worldwide escalation of all kinds and manifestations of acts of terrorism. What was true in April 2005 (the year the UN convention was adopted) is even more true today. At the same time, however, the Convention recognizes the right of all nations to develop and use nuclear power for peaceful purposes, acknowledging their justified interest in the possible benefits of the peaceful uses of nuclear power. As the Convention was signed in German still during the term of office of the Red-Green government, this passage is a remarkable acceptance of the realities of the world and past peaceful uses of nuclear power in Germany. Whether or not the convention will become an effective instrument to be used against acts of nuclear terrorism and threats depends on its entering into force after deposition of 22 ratification documents, and on as many states as possible acceding to it. Irrespective of these aspects, action in the spirit of the Convention should be taken now, criminal law should be adapted, and international cooperation should be improved and strengthened. (orig.)

Size Dependent Orientation of Knudsen Force

KAUST Repository

Zhu, Taishan

2012-03-03

Knudsen force acting on a heated microbeam adjacent to a cold substrate in a rarefied gas is a mechanical force created by unbalanced thermal gradients. The measured force has its direction pointing towards the side with a lower thermal gradient and its magnitude vanishes in both continuum and free-molecule limits. In our previous study, negative Knudsen forces were discovered at the high Knudsen regime before diminishing in the free-molecule limit. Such a phenomenon was however not observed in the experiment. In this paper, the existence of such a negative Knudsen force is further confirmed using both numerical simulation and theoretical analysis. The asymptotic order of the Knudsen force near the collisionless limit is analyzed and the analytical expression of its leading term is provided, from which approaches for the enhancement of negative Knudsen forces are proposed. Copyright © 2012 by ASME.

Disentangling the roles of natural selection and genetic drift in shaping variation at MHC immunity genes.

Science.gov (United States)

Sutton, Jolene T; Nakagawa, Shinichi; Robertson, Bruce C; Jamieson, Ian G

2011-11-01

The major histocompatibility complex (MHC) forms an integral component of the vertebrate immune response and, due to strong selection pressures, is one of the most polymorphic regions of the entire genome. Despite over 15 years of research, empirical studies offer highly contradictory explanations of the relative roles of different evolutionary forces, selection and genetic drift, acting on MHC genes during population bottlenecks. Here, we take a meta-analytical approach to quantify the results of studies into the effects of bottlenecks on MHC polymorphism. We show that the consequences of selection acting on MHC loci prior to a bottleneck event, combined with drift during the bottleneck, will result in overall loss of MHC polymorphism that is ∼15% greater than loss of neutral genetic diversity. These results are counter to general expectations that selection should maintain MHC polymorphism, but do agree with the results of recent simulation models and at least two empirical studies. Notably, our results suggest that negative frequency-dependent selection could be more important than overdominance for maintaining high MHC polymorphism in pre-bottlenecked populations. © 2011 Blackwell Publishing Ltd.

Back to the Origin: In Situ Studies Are Needed to Understand Selection during Crop Diversification

Directory of Open Access Journals (Sweden)

Yolanda H. Chen

2017-10-01

Full Text Available Crop domestication has been embraced as a model system to study the genetics of plant evolution. Yet, the role of the environment, including biotic forces such as microbial and insect communities, in contributing to crop phenotypes under domestication and diversification has been poorly explored. In particular, there has been limited progress in understanding how human selection, agricultural cultivation (soil disturbance, fertilization, and irrigation, and biotic forces act as selective pressures on crop phenotypes. For example, geographically-structured pathogenic, pestiferous, and mutualistic interactions with crop plants have likely given rise to landraces that interact differently with local microbial and insect communities. In order to understand the adaptive role of crop traits, we argue that more studies should be conducted in the geographic centers of origin to test hypotheses on how abiotic, biotic, and human selective forces have shaped the phenotypes of domesticated plants during crop domestication and subsequent diversification into landraces. In these centers of origin, locally endemic species associated with wild ancestors have likely contributed to the selection on plant phenotypes. We address a range of questions that can only be studied in the geographic center of crop origin, placing emphasis on Mesoamerican polyculture systems, and highlight the significance of in situ studies for increasing the sustainability of modern agricultural systems.

Origin of Knudsen forces on heated microbeams

KAUST Repository

Zhu, Taishan

2010-09-09

The presented work probes the fundamentals of Knudsen forces. Using the direct simulation Monte Carlo (DSMC) method, the flows induced by temperature inhomogeneity within a representative configuration and the Knudsen force acting on a heated microbeam are captured as functions of Knudsen number in the entire flow regime. Both flow strength and Knudsen force peak in the transition regime and negative Knudsen force absent in experimental data is observed. The mechanisms of the thermally induced flows and Knudsen forces are studied. It has been found that thermal edge flow is the main driven source for the formation of the Knudsen force on microbeams and domain configuration plays an important role in the process.

On the generalized potential of inertial forces

International Nuclear Information System (INIS)

Siboni, S

2009-01-01

The generalized potential of the inertial forces acting on a holonomic system in an accelerated reference frame is derived in a way which admits a simple physical interpretation. It is shown that the generalized potential refers to all the inertial forces and, apart from the very special case of a uniformly rotating frame, it is impossible to distinguish a contribution to only the Coriolis force and a contribution pertaining to the residual, velocity-independent fictitious forces. Such an approach to the determination of the generalized potential of inertial forces may be helpful in introducing the topic of the generalized potential to advanced undergraduate and graduate students

Dynamic analysis of fast-acting solenoid valves using finite element method

International Nuclear Information System (INIS)

Kwon, Ki Tae; Han, Hwa Taik

2001-01-01

It is intended to develop an algorithm for dynamic simulation of fast-acting solenoid valves. The coupled equations of the electric, magnetic, and mechanical systems should be solved simultaneously in a transient nonlinear manner. The transient nonlinear electromagnetic field is analyzed by the Finite Element Method (FEM), which is coupled with nonlinear electronic circuitry. The dynamic movement of the solenoid valve is analyzed at every time step from the force balances acting on the plunger, which include the electromagnetic force calculated from the finite element analysis as well as the elastic force by a spring and the hydrodynamic pressure force along the flow passage. Dynamic responses of the solenoid valves predicted by this algorithm agree well the experimental results including bouncing effects

Discovery and characterization of ACT-335827, an orally available, brain penetrant orexin receptor type 1 selective antagonist.

Science.gov (United States)

Steiner, Michel A; Gatfield, John; Brisbare-Roch, Catherine; Dietrich, Hendrik; Treiber, Alexander; Jenck, Francois; Boss, Christoph

2013-06-01

Stress relief: Orexin neuropeptides regulate arousal and stress processing through orexin receptor type 1 (OXR-1) and 2 (OXR-2) signaling. A selective OXR-1 antagonist, represented by a phenylglycine-amide substituted tetrahydropapaverine derivative (ACT-335827), is described that is orally available, penetrates the brain, and decreases fear, compulsive behaviors and autonomic stress reactions in rats. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

76 FR 53421 - Privacy Act of 1974; System of Records

Science.gov (United States)

2011-08-26

..., Air Force Privacy Act Office, Office of Warfighting Integration and Chief Information Officer, ATTN...: Name, signatures, personal contact information, individual's employer and institutional, organizational..., Historical Products, Services, and Requirements; Air Force Instruction 84-105, Organizational Lineage, Honors...

America COMPETES Act: Programs, Funding, and Selected Issues

National Research Council Canada - National Science Library

Stine, Deborah D

2008-01-01

.... The act responds to concerns that the United States may not be able to compete economically with other nations in the future due to insufficient investment today in science and technology research...

No 592 - Radiation Act

International Nuclear Information System (INIS)

1991-01-01

This Act will enter into force on 1 January 1992. The scope of the Act is extensive as, in addition to ionizing radiation, it will also apply to activities involving exposure to natural radiation and non-ionizing radiation. Its purpose is to prevent and restrict harmful effects to health resulting from radiation. The basic principles of the Act are that the practice involving radiation should be justified; radiation protection should be optimized; and radiation doses should be as low as reasonably achievable. Licensed organisations using radiation will be responsible for the safety of the activity involving exposure to radiation and for having available the appropriate expertise to this effect. The required so-called safety licence provides the regulatory control to ensure that radiation is used sensibly, that the equipment and shields are technically acceptable and the operating personnel is competent, and that the radioactive waste is dealt with appropriately. The Radiation Act will also apply to nuclear activities within the scope of the 1987 Nuclear Energy Act [fr

Self-acting shaft seals

Science.gov (United States)

Ludwig, L. P.

1978-01-01

Self-acting seals are described in detail. The mathematical models for obtaining a seal force balance and the equilibrium operating film thickness are outlined. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis reveals three different vibration models with secondary seal friction being an important parameter. Leakage flow inlet pressure drop and affects of axisymmetric sealing face deformations are discussed. Experimental data on self-acting face seals operating under simulated gas turbine conditions are given. Also a spiral groove seal design operated to 244 m/sec (800 ft/sec) is described.

Light-induced attractive force between two metal bodies separated by a subwavelength slit

International Nuclear Information System (INIS)

Nesterov, Vladimir; Frumin, Leonid

2011-01-01

A novel light-induced attractive force which acts as a force with negative light pressure has been revealed. The force arises by the interaction of plasmon polaritons which are excited at the surface of metal when a transverse magnetic mode propagates through a subwavelength slit between two metal bodies. The estimation of the repulsive force acting on the metal walls of the slit in the case of subwavelength TE mode propagation along the slit is presented. The explicit analytical expressions of light-induced forces between two macroscopic metal bodies or films separated by a subwavelength slit have been derived. These forces could be used to manipulate metallic macro-, micro- and nano-objects in vacuum or in a dielectric medium. Estimations of these light-induced forces show that the forces are sufficient for measurements and practical applications

Merchant shipping (Safety Convention) Act 1977

International Nuclear Information System (INIS)

1977-01-01

When this Act comes into force, it will enable the United Kingdom to ratify and to give effect to the 1974 International Convention for the Safety of Life at Sea (the SOLAS Convention) which replaces the SOLAS Convention of 1960. Under the Act, the Secretary of State may make such rules as he considers appropriate regarding ships provided with nuclear power plants in accordance with Chapter VIII of the Annex to the 1974 Convention and to Recommendations attached to it, dealing with nuclear ships, and insofar as those provisions have not been implemented by the Merchant Shipping Acts 1894 to 1974. (NEA) [fr

Radioactive Material (Road Transport) Act 1991

International Nuclear Information System (INIS)

1991-01-01

This Act came into force on 27 August 1991. It replaces earlier legislation dating from 1948 and enables the United Kingdom to give effect to the International Atomic Energy Agency's (IAEA) latest recommended Regulations for the Safe Transport of Radioactive Material. The new Act clarifies and extends the power of the Secretary of State to make regulations regarding, among other things, the design, labelling, handling, transport and delivery of packages containing radioactive material and the placarding of vehicles transporting such packages. The Act gives the Secretary of State the power to appoint inspectors to assist him in enforcing the regulations. (NEA)

'SOSORT consensus paper on brace action: TLSO biomechanics of correction (investigating the rationale for force vector selection'

Directory of Open Access Journals (Sweden)

Maruyama T

2006-07-01

Full Text Available Abstract Background The effectiveness of orthotic treatment continues to be controversial in international medical literature due to differences in the reported results and conclusions of various studies. Heterogeneity of the samples has been suggested as a reason for conflicting results. Besides the obvious theoretical differences between the brace concepts, the variability in the technical factors can also explain the contradictory results between same brace types. This paper will investigate the degree of variability among responses of scoliosis specialists from the Brace Study Ground of the International Society on Scoliosis Orthopedic and Rehabilitation Treatment SOSORT. Ultimately, this information could be a foundation for establishing a consensus and framework for future prospective controlled studies. Methods A preliminary questionnaire on the topic of 'brace action' relative to the theory of three-dimensional scoliosis correction and brace treatment was developed and circulated to specialists interested in the conservative treatment of adolescent idiopathic scoliosis. A particular case was presented (main thoracic curve with minor lumbar. Several key points emerged and were used to develop a second questionnaire which was discussed and full filed after the SOSORT consensus meeting (Milano, Italy, January 2005. Results Twenty-one questionnaires were completed. The Chêneau brace was the most frequently recommended. The importance of the three point system mechanism was stressed. Options about proper pad placement on the thoracic convexity were divided 50% for the pad reaching or involving the apical vertebra and 50% for the pad acting caudal to the apical vertebra. There was agreement about the direction of the vector force, 85% selecting a 'dorso lateral to ventro medial' direction but about the shape of the pad to produce such a force. Principles related to three-dimensional correction achieved high consensus (80%–85%, but suggested

Dynamics in the quantum/classical limit based on selective use of the quantum potential

International Nuclear Information System (INIS)

Garashchuk, Sophya; Dell’Angelo, David; Rassolov, Vitaly A.

2014-01-01

A classical limit of quantum dynamics can be defined by compensation of the quantum potential in the time-dependent Schrödinger equation. The quantum potential is a non-local quantity, defined in the trajectory-based form of the Schrödinger equation, due to Madelung, de Broglie, and Bohm, which formally generates the quantum-mechanical features in dynamics. Selective inclusion of the quantum potential for the degrees of freedom deemed “quantum,” defines a hybrid quantum/classical dynamics, appropriate for molecular systems comprised of light and heavy nuclei. The wavefunction is associated with all of the nuclei, and the Ehrenfest, or mean-field, averaging of the force acting on the classical degrees of freedom, typical of the mixed quantum/classical methods, is avoided. The hybrid approach is used to examine evolution of light/heavy systems in the harmonic and double-well potentials, using conventional grid-based and approximate quantum-trajectory time propagation. The approximate quantum force is defined on spatial domains, which removes unphysical coupling of the wavefunction fragments corresponding to distinct classical channels or configurations. The quantum potential, associated with the quantum particle, generates forces acting on both quantum and classical particles to describe the backreaction

Dynamics in the quantum/classical limit based on selective use of the quantum potential

Energy Technology Data Exchange (ETDEWEB)

Garashchuk, Sophya, E-mail: garashchuk@sc.edu; Dell’Angelo, David; Rassolov, Vitaly A. [Department of Chemistry and Biochemistry, University of South Carolina, Columbia, South Carolina 29208 (United States)

2014-12-21

A classical limit of quantum dynamics can be defined by compensation of the quantum potential in the time-dependent Schrödinger equation. The quantum potential is a non-local quantity, defined in the trajectory-based form of the Schrödinger equation, due to Madelung, de Broglie, and Bohm, which formally generates the quantum-mechanical features in dynamics. Selective inclusion of the quantum potential for the degrees of freedom deemed “quantum,” defines a hybrid quantum/classical dynamics, appropriate for molecular systems comprised of light and heavy nuclei. The wavefunction is associated with all of the nuclei, and the Ehrenfest, or mean-field, averaging of the force acting on the classical degrees of freedom, typical of the mixed quantum/classical methods, is avoided. The hybrid approach is used to examine evolution of light/heavy systems in the harmonic and double-well potentials, using conventional grid-based and approximate quantum-trajectory time propagation. The approximate quantum force is defined on spatial domains, which removes unphysical coupling of the wavefunction fragments corresponding to distinct classical channels or configurations. The quantum potential, associated with the quantum particle, generates forces acting on both quantum and classical particles to describe the backreaction.

Ponderomotive Forces in Cosmos

Science.gov (United States)

Lundin, R.; Guglielmi, A.

2006-12-01

This review is devoted to ponderomotive forces and their importance for the acceleration of charged particles by electromagnetic waves in space plasmas. Ponderomotive forces constitute time-averaged nonlinear forces acting on a media in the presence of oscillating electromagnetic fields. Ponderomotive forces represent a useful analytical tool to describe plasma acceleration. Oscillating electromagnetic fields are also related with dissipative processes, such as heating of particles. Dissipative processes are, however, left outside these discussions. The focus will be entirely on the (conservative) ponderomotive forces acting in space plasmas. The review consists of seven sections. In Section 1, we explain the rational for using the auxiliary ponderomotive forces instead of the fundamental Lorentz force for the study of particle motions in oscillating fields. In Section 2, we present the Abraham, Miller, Lundin-Hultqvist and Barlow ponderomotive forces, and the Bolotovsky-Serov ponderomotive drift. The hydrodynamic, quasi-hydrodynamic, and ‘`test-particle’' approaches are used for the study of ponderomotive wave-particle interaction. The problems of self-consistency and regularization are discussed in Section 3. The model of static balance of forces (Section 4) exemplifies the interplay between thermal, gravitational and ponderomotive forces, but it also introduces a set of useful definitions, dimensionless parameters, etc. We analyze the Alfvén and ion cyclotron waves in static limit with emphasis on the specific distinction between traveling and standing waves. Particular attention has been given to the impact of traveling Alfvén waves on the steady state anabatic wind that blows over the polar regions (Section~5). We demonstrate the existence of a wave-induced cold anabatic wind. We also show that, at a critical point, the ponderomotive acceleration of the wind is a factor of 3 greater than the thermal acceleration. Section 6 demonstrates various

Optical force rectifiers based on PT-symmetric metasurfaces

Science.gov (United States)

Alaee, Rasoul; Gurlek, Burak; Christensen, Johan; Kadic, Muamer

2018-05-01

We introduce here the concept of optical force rectifier based on parity-time symmetric metasurfaces. Directly linked to the properties of non-Hermitian systems engineered by balanced loss and gain constituents, we show that light can exert asymmetric pulling or pushing forces on metasurfaces depending on the direction of the impinging light. This generates a complete force rectification in the vicinity of the exceptional point. Our findings have the potential to spark the design of applications in optical manipulation where the forces, strictly speaking, act unidirectionally.

Evidence of natural selection acting on a polymorphic hybrid incompatibility locus in Mimulus.

Science.gov (United States)

Sweigart, Andrea L; Flagel, Lex E

2015-02-01

As a common cause of reproductive isolation in diverse taxa, hybrid incompatibilities are fundamentally important to speciation. A key question is which evolutionary forces drive the initial substitutions within species that lead to hybrid dysfunction. Previously, we discovered a simple genetic incompatibility that causes nearly complete male sterility and partial female sterility in hybrids between the two closely related yellow monkeyflower species Mimulus guttatus and M. nasutus. In this report, we fine map the two major incompatibility loci-hybrid male sterility 1 (hms1) and hybrid male sterility 2 (hms2)-to small nuclear genomic regions (each <70 kb) that include strong candidate genes. With this improved genetic resolution, we also investigate the evolutionary dynamics of hms1 in a natural population of M. guttatus known to be polymorphic at this locus. Using classical genetic crosses and population genomics, we show that a 320-kb region containing the hms1 incompatibility allele has risen to intermediate frequency in this population by strong natural selection. This finding provides direct evidence that natural selection within plant species can lead to hybrid dysfunction between species. Copyright © 2015 by the Genetics Society of America.

Forced magnetic reconnection

Science.gov (United States)

Vekstein, G.

2017-10-01

This is a tutorial-style selective review explaining basic concepts of forced magnetic reconnection. It is based on a celebrated model of forced reconnection suggested by J. B. Taylor. The standard magnetohydrodynamic (MHD) theory of this process has been pioneered by Hahm & Kulsrud (Phys. Fluids, vol. 28, 1985, p. 2412). Here we also discuss several more recent developments related to this problem. These include energetics of forced reconnection, its Hall-mediated regime, and nonlinear effects with the associated onset of the secondary tearing (plasmoid) instability.

32 CFR 806.29 - Administrative processing of Air Force FOIA requests.

Science.gov (United States)

2010-07-01

... FORCE ADMINISTRATION AIR FORCE FREEDOM OF INFORMATION ACT PROGRAM § 806.29 Administrative processing of... information systems by processing a simple request/providing a response in the electronic format requested.../service/a nongovernment source (Exemption 4), records are part of the Air Force's decision-making process...

32 CFR 806.27 - Samples of Air Force FOIA processing documents.

Science.gov (United States)

2010-07-01

... ADMINISTRATION AIR FORCE FREEDOM OF INFORMATION ACT PROGRAM § 806.27 Samples of Air Force FOIA processing... determination within 20 workdays, we have instituted multitrack processing of requests. Based on the information... source; responsive records were part of the Air Force's decision-making process, and the prerelease...

System modelling of a lateral force microscope

International Nuclear Information System (INIS)

Michal, Guillaume; Lu, Cheng; Kiet Tieu, A

2008-01-01

To quantitatively analyse lateral force microscope measurements one needs to develop a model able to relate the photodiode signal to the force acting on the tip apex. In this paper we focus on the modelling of the interaction between the cantilever and the optical chain. The laser beam is discretized by a set of rays which propagates in the system. The analytical equation of a single ray's position on the optical sensor is presented as a function of the reflection's state on top of the cantilever. We use a finite element analysis on the cantilever to connect the optical model with the force acting on the tip apex. A first-order approximation of the constitutive equations are derived along with a definition of the system's crosstalk. Finally, the model is used to analytically simulate the 'wedge method' in the presence of crosstalk in 2D. The analysis shows how the torsion loop and torsion offset signals are affected by the crosstalk.

A Comparative Analysis of Patient Access Modes at Wilford Hall United States Air Force Medical Center and Selected Civilian Medical Centers

Science.gov (United States)

1983-12-01

In A COMPARATIVE ANALYSIS OF PATIENT ACCESS MODES AT WILFORD HALL UNITED STATES AIR FORCE MEDICAL CENTER N AND SELECTED CIVILIAN MEDICAL CENTERS0 N...current patient access modes at WHMC and several civilian medical centers of comparable size. This project has pursued the subject of patient access in...selected civilian medical centers which are comparable to WHMC in size, specialty mix, workload, and mission, providing responsive and efficient patient

Probing the nanoscale interaction forces and elastic properties of organic and inorganic materials using force-distance (F-D) spectroscopy

Science.gov (United States)

Vincent, Abhilash

Due to their therapeutic applications such as radical scavenging, MRI contrast imaging, Photoluminescence imaging, drug delivery, etc., nanoparticles (NPs) have a significant importance in bio-nanotechnology. The reason that prevents the utilizing NPs for drug delivery in medical field is mostly due to their biocompatibility issues (incompatibility can lead to toxicity and cell death). Changes in the surface conditions of NPs often lead to NP cytotoxicity. Investigating the role of NP surface properties (surface charges and surface chemistry) on their interactions with biomolecules (Cells, protein and DNA) could enhance the current understanding of NP cytotoxicity. Hence, it is highly beneficial to the nanotechnology community to bring more attention towards the enhancement of surface properties of NPs to make them more biocompatible and less toxic to biological systems. Surface functionalization of NPs using specific ligand biomolecules have shown to enhance the protein adsorption and cellular uptake through more favorable interaction pathways. Cerium oxide NPs (CNPs also known as nanoceria) are potential antioxidants in cell culture models and understanding the nature of interaction between cerium oxide NPs and biological proteins and cells are important due to their therapeutic application (especially in site specific drug delivery systems). The surface charges and surface chemistry of CNPs play a major role in protein adsorption and cellular uptake. Hence, by tuning the surface charges and by selecting proper functional molecules on the surface, CNPs exhibiting strong adhesion to biological materials can be prepared. By probing the nanoscale interaction forces acting between CNPs and protein molecules using Atomic Force Microscopy (AFM) based force-distance (F-D) spectroscopy, the mechanism of CNP-protein adsorption and CNP cellular uptake can be understood more quantitatively. The work presented in this dissertation is based on the application of AFM in

Analytical Modelling Of Milling For Tool Design And Selection

International Nuclear Information System (INIS)

Fontaine, M.; Devillez, A.; Dudzinski, D.

2007-01-01

This paper presents an efficient analytical model which allows to simulate a large panel of milling operations. A geometrical description of common end mills and of their engagement in the workpiece material is proposed. The internal radius of the rounded part of the tool envelope is used to define the considered type of mill. The cutting edge position is described for a constant lead helix and for a constant local helix angle. A thermomechanical approach of oblique cutting is applied to predict forces acting on the tool and these results are compared with experimental data obtained from milling tests on a 42CrMo4 steel for three classical types of mills. The influence of some tool's geometrical parameters on predicted cutting forces is presented in order to propose optimisation criteria for design and selection of cutting tools

The Swedish Insurance Contracts Act 2005 – an overview

OpenAIRE

Hjalmarsson, Johanna

2008-01-01

On 1 January 2006 a new Insurance Contracts Act (Försäkringsavtalslag (SFS 2005:104)) entered into force in Sweden, replacing the Insurance Contracts Act 1927 and the Consumer Insurance Act 1980. The Act is in many ways a modern and interesting product and merits an introduction in English, in the context of the current process of reform undertaken by the Law Commissions of England & Wales and Scotland as well as in the context of expected European initiatives for insurance contract law r...

Self-acting and hydrodynamic shaft seals

Science.gov (United States)

Ludwig, L. P.

1973-01-01

Self-acting and hydrodynamic seals are described. The analytical procedures are outlined for obtaining a seal force balance and the operating film thickness. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis revealed three different vibration modes. Proposed applications of self-acting seals in gas turbine engines and in rocket vehicle turbopumps are described. Also experimental data on self-acting face seals operating under simulated gas turbine conditions are given; these data show the feasibility of operating the seal at conditions of 345 newtons per square centimeter (500 psi) and 152 meters per second (500 ft/sec) sliding speed.

The Radiation Protection Act

International Nuclear Information System (INIS)

Persson, L.

1989-01-01

The new Radiation Protection Act (1988:220) entered into force in Sweden on July 1st, 1988. This book presents the Act as well as certain regulations connected to it. As previously, the main responsibility for public radiation protection will rest with one central radiation protection authority. According to the 1988 Act, the general obligations with regard to radiation protection will place a greater responsibility than in the past on persons carrying out activities involving radiation. Under the act, it is possible to adjust the licensing and supervisory procedures to the level of danger of the radiation source and the need for adequate competence, etc. The Act recognises standardised approval procedures combined with technical regulations for areas where the risks are well known. The Act contains several rules providing for more effective supervision. The supervising authority may in particular decide on the necessary regulations and prohibitions for each individual case. The possibilities of using penal provisions have been extended and a rule on the mandatory execution of orders has been introduced. The Ordinance on Radiation Protection (1988:293) designates the National Institute of Radiation Protection (SSI) as the central authority referred to in the Radiation Protection Act. The book also gives a historic review of radiation protection laws in Sweden, lists regulations issued by SSI and presents explanations of radiation effects and international norms in the area. (author)

Kappa-opioid receptors mediate the antidepressant-like activity of hesperidin in the mouse forced swimming test.

Science.gov (United States)

Filho, Carlos B; Del Fabbro, Lucian; de Gomes, Marcelo G; Goes, André T R; Souza, Leandro C; Boeira, Silvana P; Jesse, Cristiano R

2013-01-05

The opioid system has been implicated as a contributing factor for major depression and is thought to play a role in the mechanism of action of antidepressants. This study investigated the involvement of the opioid system in the antidepressant-like effect of hesperidin in the mouse forced swimming test. Our results demonstrate that hesperidin (0.1, 0.3 and 1 mg/kg; intraperitoneal) decreased the immobility time in the forced swimming test without affecting locomotor activity in the open field test. The antidepressant-like effect of hesperidin (0.3 mg/kg) in the forced swimming test was prevented by pretreating mice with naloxone (1 mg/kg, a nonselective opioid receptor antagonist) and 2-(3,4-dichlorophenyl)-Nmethyl-N-[(1S)-1-(3-isothiocyanatophenyl)-2-(1-pyrrolidinyl)ethyl] acetamide (DIPPA (1 mg/kg), a selective κ-opioid receptor antagonist), but not with naloxone methiodide (1 mg/kg, a peripherally acting opioid receptor antagonist), naltrindole (3 mg/kg, a selective δ-opioid receptor antagonist), clocinnamox (1 mg/kg, a selective μ-opioid receptor antagonist) or caffeine (3 mg/kg, a nonselective adenosine receptor antagonist). In addition, a sub-effective dose of hesperidin (0.01 mg/kg) produced a synergistic antidepressant-like effect in the forced swimming test when combined with a sub-effective dose of morphine (1 mg/kg). The antidepressant-like effect of hesperidin in the forced swimming test on mice was dependent on its interaction with the κ-opioid receptor, but not with the δ-opioid, μ-opioid or adenosinergic receptors. Taken together, these results suggest that hesperidin possesses antidepressant-like properties and may be of interest as a therapeutic agent for the treatment of depressive disorders. Published by Elsevier B.V.

Effectively Managing the Air Force Enterprise Architecture

National Research Council Canada - National Science Library

Sharkey, Jamie P

2005-01-01

The Air Force is developing and implementing an enterprise architecture to meet the Clinger-Cohen Act's requirement that all federal agencies use an architecture to guide their information technology (IT) investments...

The Röntgen interaction and forces on dipoles in time-modulated optical fields

Science.gov (United States)

Sonnleitner, Matthias; Barnett, Stephen M.

2017-12-01

The Röntgen term is an often neglected contribution to the interaction between an atom and an electromagnetic field in the electric dipole approximation. In this work we discuss how this interaction term leads to a difference between the kinetic and canonical momentum of an atom which, in turn, leads to surprising radiation forces acting on the atom. We use a number of examples to explore the main features of this interaction, namely forces acting against the expected dipole force or accelerations perpendicular to the beam propagation axis.

Electromagnetic force analysis on the stator and rotor windings of a superconducting generator

International Nuclear Information System (INIS)

Colovini, L.; Martinelli, G.; Morini, A.

1985-01-01

The determination of values and distribution of the forces acting on the components of a superconducting generator is important when designing the machine, particularly in the choice of materials. The paper analyses the electromagnetic forces acting on the field and armature windings; for this purpose, with reference to the preliminary design of a two-pole 300 MVA superconducting generator, a two-dimensional analytical method set up by the authors is utilized to calculate the forces on the windings under steady state operation and results are compared with those obtained by means of a numerical method

MTS-MD of Biomolecules Steered with 3D-RISM-KH Mean Solvation Forces Accelerated with Generalized Solvation Force Extrapolation.

Science.gov (United States)

Omelyan, Igor; Kovalenko, Andriy

2015-04-14

We developed a generalized solvation force extrapolation (GSFE) approach to speed up multiple time step molecular dynamics (MTS-MD) of biomolecules steered with mean solvation forces obtained from the 3D-RISM-KH molecular theory of solvation (three-dimensional reference interaction site model with the Kovalenko-Hirata closure). GSFE is based on a set of techniques including the non-Eckart-like transformation of coordinate space separately for each solute atom, extension of the force-coordinate pair basis set followed by selection of the best subset, balancing the normal equations by modified least-squares minimization of deviations, and incremental increase of outer time step in motion integration. Mean solvation forces acting on the biomolecule atoms in conformations at successive inner time steps are extrapolated using a relatively small number of best (closest) solute atomic coordinates and corresponding mean solvation forces obtained at previous outer time steps by converging the 3D-RISM-KH integral equations. The MTS-MD evolution steered with GSFE of 3D-RISM-KH mean solvation forces is efficiently stabilized with our optimized isokinetic Nosé-Hoover chain (OIN) thermostat. We validated the hybrid MTS-MD/OIN/GSFE/3D-RISM-KH integrator on solvated organic and biomolecules of different stiffness and complexity: asphaltene dimer in toluene solvent, hydrated alanine dipeptide, miniprotein 1L2Y, and protein G. The GSFE accuracy and the OIN efficiency allowed us to enlarge outer time steps up to huge values of 1-4 ps while accurately reproducing conformational properties. Quasidynamics steered with 3D-RISM-KH mean solvation forces achieves time scale compression of conformational changes coupled with solvent exchange, resulting in further significant acceleration of protein conformational sampling with respect to real time dynamics. Overall, this provided a 50- to 1000-fold effective speedup of conformational sampling for these systems, compared to conventional MD

Polymer translocation under a pulling force: Scaling arguments and threshold forces

Science.gov (United States)

Menais, Timothée

2018-02-01

DNA translocation through nanopores is one of the most promising strategies for next-generation sequencing technologies. Most experimental and numerical works have focused on polymer translocation biased by electrophoresis, where a pulling force acts on the polymer within the nanopore. An alternative strategy, however, is emerging, which uses optical or magnetic tweezers. In this case, the pulling force is exerted directly at one end of the polymer, which strongly modifies the translocation process. In this paper, we report numerical simulations of both linear and structured (mimicking DNA) polymer models, simple enough to allow for a statistical treatment of the pore structure effects on the translocation time probability distributions. Based on extremely extended computer simulation data, we (i) propose scaling arguments for an extension of the predicted translocation times τ ˜N2F-1 over the moderate forces range and (ii) analyze the effect of pore size and polymer structuration on translocation times τ .

Lithuania’s Balancing Act

Directory of Open Access Journals (Sweden)

Šlekys Deividas

2017-12-01

Full Text Available Since regaining independence in 1990 and creating its regular armed forces, Lithuania has had to do a balancing act. It has had to balance between different approaches of state defence, military structure, collective and national defence. Due to events in Ukraine Lithuania had to reconfigure this balance. The Russian threat forced to emphasize strategy of territorial defence, which altogether required tying up forces and enlarging its numbers by bringing back conscription, substantially increased defence budget, followed by higher tempo and scale in procurement and training. However, Lithuania has managed to maintain its activity and participation in international military operations and political initiatives. Its recent contributions have led to an assumption that its participation in various military missions in the future will not diminish, quite the opposite. Increasing the framework of cooperation in terms of defence and security initiatives will involve Lithuania more deeply and will require further contributions.

Effect of polarization force on the Jeans instability of self-gravitating dusty plasma

International Nuclear Information System (INIS)

Prajapati, R.P.

2011-01-01

The effect of polarization force acting on massive charged dust grains is investigated analytically on the Jeans instability of self-gravitating dusty plasma. The gravitational force acting on the massive negatively charged interstellar dust grains are considered in presence of both electrical and polarization forces. The basic equations of the problem are formulated and a general dispersion relation is obtained using plane wave approximation in low frequency wave mode. The effect of polarization force in the dispersion relation of the problem, condition of the Jeans instability and expression of the critical Jeans wave number is examined. The unstable growing modes due to self-gravitational force are studied in the situation when polarization force on the dust grain exceeds over the electrical force in magnitude. It is observed that the polarization force increases the growth rate of the system. -- Highlights: → Jeans instability of gravitating dusty plasma with polarization force is investigated. → The fundamental Jeans instability criterion is modified due to polarization effect. → The critical Jeans length decreases due to increase in polarization force. → Polarization force destabilizes the unstable Jeans mode. → The collapsing of interstellar dusty cloud is discussed.

Specified radioactive waste final disposal act

International Nuclear Information System (INIS)

Yasui, Masaya

2001-01-01

Radioactive wastes must be finally and safely disposed far from human activities. Disposal act is a long-range task and needs to be understood and accepted by public for site selection. This paper explains basic policy of Japanese Government for final disposal act of specified radioactive wastes, examination for site selection guidelines to promote residential understanding, general concept of multi-barrier system for isolating the specific radioactive wastes, and research and technical development for radioactive waste management. (S. Ohno)

Self-force on dislocation segments in anisotropic crystals

International Nuclear Information System (INIS)

Fitzgerald, S P; Aubry, S

2010-01-01

A dislocation segment in a crystal experiences a 'self-force', by virtue of the orientation dependence of its elastic energy. If the crystal is elastically isotropic, this force is manifested as a couple acting to rotate the segment toward the lower energy of the pure screw orientation (i.e. acting to align the dislocation line with its Burgers vector). If the crystal is anisotropic, there are additional contributions to the couple, arising from the more complex energy landscape of the lattice itself. These effects can strongly influence the dynamic evolution of dislocation networks, and via their governing role in dislocation multiplication phenomena, control plastic flow in metals. In this paper we develop a model for dislocation self-forces in a general anisotropic crystal, and briefly consider the technologically important example of α-iron, which becomes increasingly anisotropic as the temperature approaches that of the α-γ phase transition at 912 0 C.

The cost of reinforcement: selection on flower color in allopatric populations of Phlox drummondii.

Science.gov (United States)

Hopkins, Robin; Rausher, Mark D

2014-05-01

Reinforcement is the process by which increased reproductive isolation between incipient species evolves due to selection against maladaptive hybrids or costly hybrid mating. Reinforcement is predicted to create a pattern of greater prezygotic reproductive isolation in regions where the two species co-occur, sympatry, than in allopatry. Although most research on reinforcement focuses on understanding the evolutionary forces acting in sympatry, here we consider what prevents the alleles conferring greater reproductive isolation from spreading into allopatry. We investigate flower color divergence in the wildflower Phlox drummondii, which is caused by reinforcement in the regions sympatric with its congener Phlox cuspidata. Specifically, we performed common garden field experiments and pollinator observations to estimate selection acting on flower color variation in allopatry. We combine our estimates of maternal and paternal fitness using simulations and predict how flower color alleles migrating from sympatry will evolve in allopatry. Our results suggest that strong pollinator preference for the ancestral flower color in allopatry can maintain divergence between allopatric and sympatric populations.

Shape-dependent orientation of thermophoretic forces in microsystems

KAUST Repository

Li, Qi

2013-09-24

It is generally acknowledged that the direction of the thermophoretic force acting on microparticles is largely determined by the imposed temperature gradient, and the shape of the microparticle has little influence on its direction. We show that one type of thermophoretic force, emerged due to the advent of microfabrication techniques, is highly sensitive to object shape, and it is feasible to tune force orientation via proper shape design. We reveal the underlying mechanism by an asymptotic analysis of the Boltzmann equation and point out the reason why the classical thermophoretic force is insensitive to the particle shape, but the force in microsystems is. The discovered phenomenon could find its applications in methods for microparticle manipulation and separation.

Repulsive Casimir force at zero and finite temperature

International Nuclear Information System (INIS)

Lim, S C; Teo, L P

2009-01-01

We study the zero and finite temperature Casimir force acting on a perfectly conducting piston with arbitrary cross section moving inside a closed cylinder with infinitely permeable walls. We show that at any temperature, the Casimir force always tends to move the piston away from the walls and toward its equilibrium position. In the case of a rectangular piston, exact expressions for the Casimir force are derived. In the high-temperature regime, we show that the leading term of the Casimir force is linear in temperature and therefore the Casimir force has a classical limit. Due to duality, all these results also hold for an infinitely permeable piston moving inside a closed cylinder with perfectly conducting walls.

Shape-dependent orientation of thermophoretic forces in microsystems

KAUST Repository

Li, Qi; Liang, Tengfei; Ye, Wenjing

2013-01-01

It is generally acknowledged that the direction of the thermophoretic force acting on microparticles is largely determined by the imposed temperature gradient, and the shape of the microparticle has little influence on its direction. We show that one type of thermophoretic force, emerged due to the advent of microfabrication techniques, is highly sensitive to object shape, and it is feasible to tune force orientation via proper shape design. We reveal the underlying mechanism by an asymptotic analysis of the Boltzmann equation and point out the reason why the classical thermophoretic force is insensitive to the particle shape, but the force in microsystems is. The discovered phenomenon could find its applications in methods for microparticle manipulation and separation.

Negative Knudsen force on heated microbeams

KAUST Repository

Zhu, Taishan

2011-11-18

Knudsen force acting on a heated microbeam adjacent to a cold substrate in a rarefied gas is a mechanical force created by unbalanced thermal gradients. The measured force has its direction pointing towards the side with a lower thermal gradient and its magnitude vanishes in both continuum and free-molecule limits. In our previous study, negative Knudsen forces were discovered at the high Knudsen regime before diminishing in the free-molecule limit. Such a phenomenon was, however, neither observed in experiment [A. Passian et al., Phys. Rev. Lett. 90, 124503 (2003)], nor captured in the latest numerical study [J. Nabeth et al., Phys. Rev. E 83, 066306 (2011)]. In this paper, the existence of such a negative Knudsen force is further confirmed using both numerical simulation and theoretical analysis. The asymptotic order of the Knudsen force near the collisionless limit is analyzed and the analytical expression of its leading term is provided, from which approaches for the enhancement of negative Knudsen forces are proposed. The discovered phenomenon could find its applications in novel mechanisms for pressure sensing and actuation.

Drafting force majeure clauses in natural gas purchase/sale contracts -- the practicalities

International Nuclear Information System (INIS)

Reschke, D. N.; Campbell, L. M.

1999-01-01

The place of 'force majeure' provisions, in gas purchase/sale contracts is discussed. This issue, not normally considered to be significant in gas purchase/sale contracts, became a matter of intense interest in the aftermath of the Atcor Ltd v. Continental Energy Marketing case when the trial court, as well as the Alberta Court of Appeals, strongly criticized the wording of the force majeure clause in the contract as containing a 'choice of words that assured litigation'. Force majeure, simply stated, refers to acts of God, (lightning, earthquakes, storms, floods, etc) and acts of war. It is inserted in contracts to limit the liability of parties to the contract in the event of inability to perform due to any of the above acts of God, or acts of war. In this particular case, the force majeure cause included, in addition to the above, a long list of other causes such as strikes, lockouts or other industrial disturbances, insurrections, riots, epidemics, landslides, fires, washouts, explosions of or accidents to plant, machinery or lines of pipe, well blowouts, and pipeline repairs and reconditioning. The trial court found the drafting of the clause archaic, circumventing clarity, and drearily lengthy. In view of the court's decision it is clear that more thought has to go into drafting force majeure decisions in the future. Accordingly, this paper attempts to discuss practical issues of drafting force majeure clauses that clearly reflect the parties' intentions and expectations so that costly litigations might be avoided, or if litigation is unavoidable, to at least have the outcome of such litigation be more predictable. The focus of the discussion is on legal interpretation issues, forms of gas contract force majeure provisions- events and consequences, and standardization of force majeure provisions. It is recommended that the drafter of such clauses should always keep in mind the potential impact that the strict construction and commercial reasonability concepts

76 FR 2113 - Sunshine Act; Notice of Meeting

Science.gov (United States)

2011-01-12

... public. MATTERS TO BE CONSIDERED: Open Session 1. Announcement of Notation Votes, and 2. Human Trafficking and Forced Labor--Invited Panelists Note: In accordance with the Sunshine Act, the meeting will be...

Analysis of Dynamic Inertia Forces at Main Bearing of Ship Reciprocating Engines

Directory of Open Access Journals (Sweden)

F. Louhenapessy Louhenapessy,

2010-11-01

Full Text Available During operation, a ship reciprocating engine will vibrate due to the force resulting from the cycle movement of the dynamic components. Soon or later, the vibration will cause wear of engine components. Therefore, the cause of vibration should be early identified so that the propagation of wear can be anticipated. The study modeled the ship reciprocating engine as a two stroke engine, and analyzed one of the causes of the engine vibration, i.e. the force acting on main bearing, using a numerical simulation. An experimental study was also carried out for measuring the acceleration of vibration response due to the numerical dynamic inertia force. The results showed that the dynamic inertia force acting on the main bearing is the main cause of the vibration of engine.

Was skin cancer a selective force for black pigmentation in early hominin evolution?

Science.gov (United States)

Greaves, Mel

2014-01-01

Melanin provides a crucial filter for solar UV radiation and its genetically determined variation influences both skin pigmentation and risk of cancer. Genetic evidence suggests that the acquisition of a highly stable melanocortin 1 receptor allele promoting black pigmentation arose around the time of savannah colonization by hominins at some 1–2 Ma. The adaptive significance of dark skin is generally believed to be protection from UV damage but the pathologies that might have had a deleterious impact on survival and/or reproductive fitness, though much debated, are uncertain. Here, I suggest that data on age-associated cancer incidence and lethality in albinos living at low latitudes in both Africa and Central America support the contention that skin cancer could have provided a potent selective force for the emergence of black skin in early hominins. PMID:24573849

DETERMINATION OF FRAME FORCE FOR ELECTRIC LOCOMOTIVE VL80 WHEN MOVING IN THE CURVED TRACK SECTIONS

Directory of Open Access Journals (Sweden)

A. Y. Kuzyshyn

2017-06-01

Full Text Available Purpose. When locomotives move in curved sections of the railway track, horizontal forces arise, which lead to pressing the ridge of the wheel pair to the railway track. The article is aimed to develop a method for determining the frame force acting on the bogie from the side of body of the locomotive section using the current methodology of calculating the lateral force. It is also aimed to determine the basic parameters that influence the value of the frame force. It is necessary to construct the dependencies of the frame force on the travel time of electric locomotive in the corresponding curve changing these parameters. Methodology. As is known, the electric locomotive is a multimass mechanical system. We will assume that this system consists of seven bodies: a body, two frames of carriages and four wheel sets. To determine the lateral force acting on the rail from the wheelset one need to solve differential equations of motion of locomotive bogie in curves of small radius. Using the equations of kinetostatics for wheelset one should come to determining the frame force acting on the car bogie from the side of body of the locomotive section. The nominal geometric and mass parameters of parts and components of electric locomotive are taken in the calculations. The curve radius, the length of transition curve, the length of circular curve, the longitudinal slope of railway track and other parameters are fixed values. Findings. There were obtained calculated values of the frame force of electric locomotive VL80 acting on the bogie from the side of body of the locomotive section. Based on the obtained results there were built the dependencies of frame force on the travel time of electric locomotive on the corresponding curve when changing the speed and corresponding elevation of the outer rail. Originality. On the basis of the existing methodology for calculating the lateral force it was developed the method for determining the frame force acting

75 FR 22569 - Privacy Act of 1974; System of Records

Science.gov (United States)

2010-04-29

... DEPARTMENT OF DEFENSE Department of the Air Force [Docket ID: USAF-2010-0014] Privacy Act of 1974... inventory of record systems subject to the Privacy Act of 1974, (5 U.S.C. 552a), as amended. DATES: This... Internet at http://www.regulations.gov as they are received without change, including any personal...

76 FR 37329 - Privacy Act of 1974; System of Records

Science.gov (United States)

2011-06-27

... DEPARTMENT OF DEFENSE Department of the Air Force [Docket ID: USAF-2011-0018] Privacy Act of 1974... of record systems subject to the Privacy Act of 1974 (5 U.S.C. 552a), as amended. DATES: This... public is to make these submissions available for public viewing on the Internet at http://www...

Telling tails: selective pressures acting on investment in lizard tails.

Science.gov (United States)

Fleming, Patricia A; Valentine, Leonie E; Bateman, Philip W

2013-01-01

Caudal autotomy is a common defense mechanism in lizards, where the animal may lose part or all of its tail to escape entrapment. Lizards show an immense variety in the degree of investment in a tail (i.e., length) across species, with tails of some species up to three or four times body length (snout-vent length [SVL]). Additionally, body size and form also vary dramatically, including variation in leg development and robustness and length of the body and tail. Autotomy is therefore likely to have fundamentally different effects on the overall body form and function in different species, which may be reflected directly in the incidence of lost/regenerating tails within populations or, over a longer period, in terms of relative tail length for different species. We recorded data (literature, museum specimens, field data) for relative tail length (n=350 species) and the incidence of lost/regenerating tails (n=246 species). We compared these (taking phylogeny into account) with intrinsic factors that have been proposed to influence selective pressures acting on caudal autotomy, including body form (robustness, body length, leg development, and tail specialization) and ecology (foraging behavior, physical and temporal niches), in an attempt to identify patterns that might reflect adaptive responses to these different factors. More gracile species have relatively longer tails (all 350 spp., P lost/regenerating tails for nocturnal lizards (all 246 spp., P pressure.

75 FR 22570 - Privacy Act of 1974; System of Records

Science.gov (United States)

2010-04-29

... DEPARTMENT OF DEFENSE Department of the Air Force [Docket ID: USAF-2010-0012] Privacy Act of 1974... inventory of record systems subject to the Privacy Act of 1974, (5 U.S.C. 552a), as amended. DATES: This... on the Internet at http://www.regulations.gov as they are received without change, including any...

76 FR 1411 - Privacy Act of 1974; System of Records

Science.gov (United States)

2011-01-10

... DEPARTMENT OF DEFENSE Department of the Air Force [Docket ID: USAF-2011-0001] Privacy Act of 1974... of record systems subject to the Privacy Act of 1974, (5 U.S.C. 552a), as amended. DATES: This... the public is to make these submissions available for public viewing on the Internet at http://www...

75 FR 63824 - Privacy Act of 1974; System of Records

Science.gov (United States)

2010-10-18

... DEPARTMENT OF DEFENSE Department of the Air Force [Docket ID: USAF-2010-0026] Privacy Act of 1974... inventory of record systems subject to the Privacy Act of 1974, (5 U.S.C. 552a), as amended. DATES: This... for public viewing on the Internet at http://www.regulations.gov as they are received without change...

Atomic Energy Control Act, c A.19, s.1

International Nuclear Information System (INIS)

1985-01-01

The Revised Statutes of Canada 1985 entered into force on 12 December 1988, revoking the previous Atomic Energy Control Act and replacing it with a new version. The new Act (Chapter A-16 of the Revised Statutes) updates the previous text and makes some linguistic corrections. The Atomic Energy Control Act establishes the Atomic Energy Control Board and sets out its duties and powers which include, in particular, the making of regulations for developing, controlling and licensing the production, application and use of atomic energy [fr

Laser radiation forces in laser-produced plasmas

International Nuclear Information System (INIS)

Stamper, J.A.

1975-01-01

There are two contributions to laser radiation forces acting on the electrons. Transfer of momentum from the fields to the electrons results in a field pressure contribution and occurs whenever there is absorption or reflection. The quiver pressure contribution, associated with electron quiver motion, is due to inhomogeneous fields inducing momentum transfer within the electron system. It is shown that the ponderomotive force with force density, (epsilon-1)/8πdel 2 >, does not include the field contribution and does not lead to a general description of macroscopic processes. A theory is discussed which does give a general macroscopic description (absorption, reflection, refraction, and magnetic field generation) and which reduces to the ponderomotive force for purely sinusoidal fields in a neutral, homogeneous, nonabsorbing plasma

Vertical and lateral forces when a permanent magnet above a superconductor traverses in arbitrary directions

Science.gov (United States)

Yang, Yong

2008-12-01

In an actual levitation system composed of high temperature superconductors (HTSs) and permanent magnets (PMs), the levitating bodies may traverse in arbitrary directions. Many previous researchers assumed that the levitating bodies moved in a vertical direction or a lateral direction in order to simplify the problem. In this paper, the vertical and lateral forces acting on the PM are calculated by the modified frozen-image method when a PM above an HTS traverses in arbitrary directions. In order to study the effects of the movement directions on the vertical and lateral forces, comparisons of the forces that act on a PM traversing in a tilted direction with those that act on a PM traversing in a vertical direction or a lateral direction have been presented.

Vertical and lateral forces when a permanent magnet above a superconductor traverses in arbitrary directions

Energy Technology Data Exchange (ETDEWEB)

Yang Yong [Key Laboratory of Applied Superconductivity, Chinese Academy of Sciences, Beijing 100190 (China); Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190 (China)], E-mail: yy@mail.iee.ac.cn

2008-12-15

In an actual levitation system composed of high temperature superconductors (HTSs) and permanent magnets (PMs), the levitating bodies may traverse in arbitrary directions. Many previous researchers assumed that the levitating bodies moved in a vertical direction or a lateral direction in order to simplify the problem. In this paper, the vertical and lateral forces acting on the PM are calculated by the modified frozen-image method when a PM above an HTS traverses in arbitrary directions. In order to study the effects of the movement directions on the vertical and lateral forces, comparisons of the forces that act on a PM traversing in a tilted direction with those that act on a PM traversing in a vertical direction or a lateral direction have been presented.

Vertical and lateral forces when a permanent magnet above a superconductor traverses in arbitrary directions

International Nuclear Information System (INIS)

Yang Yong

2008-01-01

In an actual levitation system composed of high temperature superconductors (HTSs) and permanent magnets (PMs), the levitating bodies may traverse in arbitrary directions. Many previous researchers assumed that the levitating bodies moved in a vertical direction or a lateral direction in order to simplify the problem. In this paper, the vertical and lateral forces acting on the PM are calculated by the modified frozen-image method when a PM above an HTS traverses in arbitrary directions. In order to study the effects of the movement directions on the vertical and lateral forces, comparisons of the forces that act on a PM traversing in a tilted direction with those that act on a PM traversing in a vertical direction or a lateral direction have been presented.

Optical forces, torques, and force densities calculated at a microscopic level using a self-consistent hydrodynamics method

Science.gov (United States)

Ding, Kun; Chan, C. T.

2018-04-01

The calculation of optical force density distribution inside a material is challenging at the nanoscale, where quantum and nonlocal effects emerge and macroscopic parameters such as permittivity become ill-defined. We demonstrate that the microscopic optical force density of nanoplasmonic systems can be defined and calculated using the microscopic fields generated using a self-consistent hydrodynamics model that includes quantum, nonlocal, and retardation effects. We demonstrate this technique by calculating the microscopic optical force density distributions and the optical binding force induced by external light on nanoplasmonic dimers. This approach works even in the limit when the nanoparticles are close enough to each other so that electron tunneling occurs, a regime in which classical electromagnetic approach fails completely. We discover that an uneven distribution of optical force density can lead to a light-induced spinning torque acting on individual particles. The hydrodynamics method offers us an accurate and efficient approach to study optomechanical behavior for plasmonic systems at the nanoscale.

The Rights Granted to Trade Unions Under the Companies Act 71 of ...

African Journals Online (AJOL)

With the entering into force of the Companies Act 71 of 2008 in 2011 a number of rights were granted to trade unions by the act. The Companies Act 71 of 2008 not only grants rights to registered trade unions, as is the case in labour law, but in some cases it grants rights to trade unions representing employees at the ...

The Role of the Right Hemisphere in Speech Act Comprehension

Science.gov (United States)

Holtgraves, Thomas

2012-01-01

In this research the role of the RH in the comprehension of speech acts (or illocutionary force) was examined. Two split-screen experiments were conducted in which participants made lexical decisions for lateralized targets after reading a brief conversation remark. On one-half of the trials the target word named the speech act performed with the…

Ensemble data assimilation in the Red Sea: sensitivity to ensemble selection and atmospheric forcing

KAUST Repository

Toye, Habib

2017-05-26

We present our efforts to build an ensemble data assimilation and forecasting system for the Red Sea. The system consists of the high-resolution Massachusetts Institute of Technology general circulation model (MITgcm) to simulate ocean circulation and of the Data Research Testbed (DART) for ensemble data assimilation. DART has been configured to integrate all members of an ensemble adjustment Kalman filter (EAKF) in parallel, based on which we adapted the ensemble operations in DART to use an invariant ensemble, i.e., an ensemble Optimal Interpolation (EnOI) algorithm. This approach requires only single forward model integration in the forecast step and therefore saves substantial computational cost. To deal with the strong seasonal variability of the Red Sea, the EnOI ensemble is then seasonally selected from a climatology of long-term model outputs. Observations of remote sensing sea surface height (SSH) and sea surface temperature (SST) are assimilated every 3 days. Real-time atmospheric fields from the National Center for Environmental Prediction (NCEP) and the European Center for Medium-Range Weather Forecasts (ECMWF) are used as forcing in different assimilation experiments. We investigate the behaviors of the EAKF and (seasonal-) EnOI and compare their performances for assimilating and forecasting the circulation of the Red Sea. We further assess the sensitivity of the assimilation system to various filtering parameters (ensemble size, inflation) and atmospheric forcing.

Decode and Zero-Forcing Forward Relaying with Relay Selection in Cognitive Radio Systems

KAUST Repository

Park, Kihong

2014-05-01

In this paper, we investigate a cognitive radio (CR) relay network with multiple relay nodes that help forwarding the signal of CR users. Best relay selection is considered to take advantage of its low complexity of implementation. When the primary user (PU) is located close to the relay nodes, the performance of the secondary network is severely degraded due to the interference power constraint during the transmission in the second hop. We propose a decode and zero-forcing forward scheme to suppress the interference power at the relay nodes and analyze the statistics of the end-to-end signal-to-noise ratio when the relay nodes are located arbitrarily and experience therefore non-identical Rayleigh fading channels. Numerical results validate our theoretical results and show that our proposed scheme improves the performance of the CR network when the PU is close to the relay nodes. © 2014 IEEE.

Experimental study on inter-particle acoustic forces.

Science.gov (United States)

Garcia-Sabaté, Anna; Castro, Angélica; Hoyos, Mauricio; González-Cinca, Ricard

2014-03-01

A method for the experimental measurement of inter-particle forces (secondary Bjerknes force) generated by the action of an acoustic field in a resonator micro-channel is presented. The acoustic radiation force created by an ultrasonic standing wave moves suspended particles towards the pressure nodes and the acoustic pressure induces particle volume oscillations. Once particles are in the levitation plane, transverse and secondary Bjerknes forces become important. Experiments were carried out in a resonator filled with a suspension composed of water and latex particles of different size (5-15 μm) at different concentrations. Ultrasound was generated by means of a 2.5 MHz nominal frequency transducer. For the first time the acoustic force generated by oscillating particles acting on other particles has been measured, and the critical interaction distance in various cases has been determined. Inter-particle forces on the order of 10(-14) N have been measured by using this method.

Comparison of frictional forces on graphene and graphite

International Nuclear Information System (INIS)

Lee, Hyunsoo; Lee, Naesung; Seo, Yongho; Eom, Jonghwa; Lee, SangWook

2009-01-01

We report on the frictional force between an SiN tip and graphene/graphite surfaces using lateral force microscopy. The cantilever we have used was made of an SiN membrane and has a low stiffness of 0.006 N m -1 . We prepared graphene flakes on a Si wafer covered with silicon oxides. The frictional force on graphene was smaller than that on the Si oxide and larger than that on graphite (multilayer of graphene). Force spectroscopy was also employed to study the van der Waals force between the graphene and the tip. Judging that the van der Waals force was also in graphite-graphene-silicon oxide order, the friction is suspected to be related to the van der Waals interactions. As the normal force acting on the surface was much weaker than the attractive force, such as the van der Waals force, the friction was independent of the normal force strength. The velocity dependency of the friction showed a logarithmic behavior which was attributed to the thermally activated stick-slip effect.

Two 'hot buttons' in gas contracting: security performance and force majeure

International Nuclear Information System (INIS)

Park, J.J.

1996-01-01

Two important developments in gas contracting issues are the 'force majeure' provisions and security for performance clauses. 'Force majeure' was defined as any acts of God or any acts of omission by a transporter of gas, which is excused by any event not within the control of the party claiming suspension. 'Force majeure' provisions need to be specifically negotiated in every case. These issues often arise in gas contracting situations, but the nature of Canada's non-litigious oil and gas industry is such that we have had little or no Canadian case law to assist in interpreting what these clauses mean. The 'force majeure' clause is basically meant to protect the parties from events outside normal business risk. The security of performance issue arises when the obligation of a supplier of gas to perform, and the obligation of a buyer of gas to pay, is unsecured, as would be the case for example, if one of the parties becomes bankrupt

76 FR 15334 - Aquatic Nuisance Species Task Force Meeting

Science.gov (United States)

2011-03-21

... Task Force Web site at: http://anstaskforce.gov/meetings.php . FOR FURTHER INFORMATION CONTACT: Susan...: http://anstaskforce.gov/meetings.php . Dated: March 14, 2011. Jeffrey Underwood, Acting Assistant...

Community rejection following sexual assault as ‘forced migration’

OpenAIRE

AJ Morgen

2013-01-01

When women are banished from their communities following sexual assault, this rejection should be considered an act of forced migration by the administrators of truth commission reparations programmes.

Simultaneous inference of selection and population growth from patterns of variation in the human genome

DEFF Research Database (Denmark)

Williamson, Scott H.; Hernandez, Ryan; Fledel-Alon, Adi

2005-01-01

Natural selection and demographic forces can have similar effects on patterns of DNA polymorphism. Therefore, to infer selection from samples of DNA sequences, one must simultaneously account for demographic effects. Here we take a model-based approach to this problem by developing predictions fo......-specific methods, and (iii) strong evidence for very recent population growth....... for patterns of polymorphism in the presence of both population size change and natural selection. If data are available from different functional classes of variation, and a priori information suggests that mutations in one of those classes are selectively neutral, then the putatively neutral class can...... this method to a large polymorphism data set from 301 human genes and find (i) widespread negative selection acting on standing nonsynonymous variation, (ii) that the fitness effects of nonsynonymous mutations are well predicted by several measures of amino acid exchangeability, especially site...

Officer Selection (la Selection des officiers)

National Research Council Canada - National Science Library

2000-01-01

.... The theme of this workshop, officer selection, is an issue of central importance to the military forces of all countries, since it determines which individuals, with what characteristics, will...

Response selection difficulty modulates the behavioral impact of rapidly learnt action effects.

Directory of Open Access Journals (Sweden)

Uta eWolfensteller

2014-12-01

Full Text Available It is well established that we can pick up action effect associations when acting in a free-choice intentional mode. However, it is less clear whether and when action effect associations are learnt and actually affect behavior if we are acting in a forced-choice mode, applying a specific stimulus-response (S-R rule. In the present study, we investigated whether response selection difficulty imposed by S-R rules influences the initial rapid learning and the behavioral expression of previously learnt but weakly practiced action effect associations when those are re-activated by effect exposure. Experiment 1 showed that the rapid acquisition of action effect associations is not directly influenced by response selection difficulty. By contrast, the behavioral expression of re-activated action effect associations is prevented when actions are directly activated by highly over-learnt response cues and thus response selection difficulty is low. However, all three experiments showed that if response selection difficulty is sufficiently high during re-activation, the same action effect associations do influence behavior. Experiment 2 and 3 revealed that the effect of response selection difficulty cannot be fully reduced to giving action effects more time to prime an action, but seems to reflect competition during response selection. Finally, the present data suggest that when multiple novel rules are rapidly learnt in succession, which requires a lot of flexibility, action effect associations continue to influence behavior only if response selection difficulty is sufficiently high. Thus, response selection difficulty might modulate the impact of experiencing multiple learning episodes on action effect expression and learning, possibly via inducing different strategies.

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Performance of construction work: Sponsor... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking any force account construction work, the sponsor (or any public agency acting as agent for the sponsor...

Nuclear Liability Act. RS, c.29 (1st supp.), s.1

International Nuclear Information System (INIS)

1985-01-01

The Revised Statutes of Canada 1985 which entered into force on 12 December 1988 revoked the Nuclear Liability Act of 1970, replacing it with a new version. The new Act (Chapter N-28 of the Revised Statutes) updates the previous text and makes some linguistic corrections. The principles of the Act of 1970 remain unchanged, namely absolute liability of the nuclear operator, such liability being limited in amount and in time [fr

Composition and conductance distributions of single GeSi quantum rings studied by conductive atomic force microscopy combined with selective chemical etching.

Science.gov (United States)

Lv, Y; Cui, J; Jiang, Z M; Yang, X J

2013-02-15

Atomic force microscopy imaging combined with selective chemical etching is employed to quantitatively investigate three-dimensional (3D) composition distributions of single GeSi quantum rings (QRs). In addition, the 3D quantitative composition distributions and the corresponding conductance distributions are simultaneously obtained on the same single GeSi QRs by conductive atomic force microscopy combined with selective chemical etching, allowing us to investigate the correlations between the conductance and composition distributions of single QRs. The results show that the QRs' central holes have higher Ge content, but exhibit lower conductance, indicating that the QRs' conductance distribution is not consistent with their composition distribution. By comparing the topography, composition and conductance profiles of the same single QRs before and after different etching processes, it is found that the conductance distributions of GeSi QRs do not vary with the change of composition distribution. Instead, the QRs' conductance distributions are found to be consistent with their topographic shapes, which can be supposed to be due to the shape determined electronic structures.

The Electromotive Force in Different Reference Frames

Science.gov (United States)

Adler, Charles L.

2018-05-01

The electromotive force (EMF) is the work per unit charge around a wire loop caused by a time-varying magnetic flux threading the loop. It is due to a force moving the charges around the loop. This is true whether the change in flux is due to the wire loop being stationary and the field changing in time, or the loop moving through a spatially varying field. In the first case, we say that the time-varying magnetic field induces an electric field that provides the force; in the second, we say that the force is due to the magnetic field acting on the charges in the moving loop. The theory of relativity states that both viewpoints must be equivalent, but it is sometimes difficult to harmonize them.

32 CFR 806b.30 - Evaluating information systems for Privacy Act compliance.

Science.gov (United States)

2010-07-01

... privacy issues are unchanged. (d) The depth and content of the Privacy Impact Assessment should be... 32 National Defense 6 2010-07-01 2010-07-01 false Evaluating information systems for Privacy Act... FORCE ADMINISTRATION PRIVACY ACT PROGRAM Privacy Impact Assessments § 806b.30 Evaluating information...

Federal Act of 29 April 1964 on Liability for Nuclear Damage (Atomic Liability Act)

International Nuclear Information System (INIS)

Under this Act, the operator of a nuclear installation is liable for any nuclear incident occurring in such installation or which is caused by nuclear substances in his charge. If an incident is caused by a radioisotope, the person in possession of the radioisotope at the time of the incident is liable therefore. When an incident occurs during transport of nuclear substances, the carrier is liable in three cases only: when such substances are neither despatched to nor originating from installations on Austrian territory; when they are despatched without the written consent of the Austrian operator who is to receive them; and when they are not destined for a nuclear installation. Other provisions of the Act fix liability ceilings, a basis for apportionment of compensation when several victims are involved and the amount of security for coverage of the operators liability. The Act came into force on 1 September 1964. (NEA) [fr

Nuclear Liability Act as amended (No 484/72)

International Nuclear Information System (INIS)

1972-01-01

This Act which entered into force on 16th June 1972 adopted the essential principles laid down in the Paris Convention. These include in particular absolute liability of the operator, its limitation in amount and in time. (NEA) [fr

Weight, the Normal Force and Newton's Third Law: Dislodging a Deeply Embedded Misconception

Science.gov (United States)

Low, David; Wilson, Kate

2017-01-01

On entry to university, high-achieving physics students from all across Australia struggle to identify Newton's third law force pairs. In particular, less than one in ten can correctly identify the Newton's third law reaction pair to the weight of (gravitational force acting on) an object. Most students incorrectly identify the normal force on the…

Force Relations and Dynamics of Cutting Knife in a Vertical Disc Mobile Wood Chipper

Directory of Open Access Journals (Sweden)

Segun R. BELLO

2011-06-01

Full Text Available The force relations and dynamics of cutting knife in a vertical disc wood chipper were investigated. The tool geometry determined include: rake angle (20 deg C; Shear angle, (fi= 52.15 deg C; the mean frictional angle, (t = 5.71 deg C. The analysis and comparison of the cutting forces has shown that the chips separated from the wood are being formed by off cutting, since normal applied force N is compressive in nature, the magnitude of the forces used by the knife on the wood is expected to increase as the cutting edge of the knife goes deeper into the wood until the value of the resisting force acting against the cut wood Ff is reached and exceeded. The evaluated forces acting on the knife and the chip are: F = 3.63Nmm^-1; N = 34.7 Nmm^-1; Fs= 27.45Nmm^-1; Fn =31.92 Nmm^-1; Ft = -8.46Nmm^-1; Fc = 33.85Nmm^-1. The resultant force acting on the tool face, Pr = 34.89Nmm^-1. The specific cutting pressure, Pc and cutting force needed to cut the timber, Fc, are 1.79 × 10^6 N/m2 and 644.84N respectively. The energy consumed in removing a unit volume of material is 69.96kJ/mm^-3 and the maximum power developed in cutting the chip is 3591.77W (4.82hp. The chipper efficiency (86.6% was evaluated by the highest percentage of accepted chip sizes.

Natural selection drives the evolution of ant life cycles.

Science.gov (United States)

Wilson, Edward O; Nowak, Martin A

2014-09-02

The genetic origin of advanced social organization has long been one of the outstanding problems of evolutionary biology. Here we present an analysis of the major steps in ant evolution, based for the first time, to our knowledge, on combined recent advances in paleontology, phylogeny, and the study of contemporary life histories. We provide evidence of the causal forces of natural selection shaping several key phenomena: (i) the relative lateness and rarity in geological time of the emergence of eusociality in ants and other animal phylads; (ii) the prevalence of monogamy at the time of evolutionary origin; and (iii) the female-biased sex allocation observed in many ant species. We argue that a clear understanding of the evolution of social insects can emerge if, in addition to relatedness-based arguments, we take into account key factors of natural history and study how natural selection acts on alleles that modify social behavior.

Longitudinal Lorentz force on a subwavelength-diameter optical fiber

International Nuclear Information System (INIS)

Yu Huakang; Fang Wei; Gu Fuxing; Yang Zongyin; Tong Limin; Qiu Min

2011-01-01

We analyze the longitudinal Lorentz forces that a propagating continuous-wave light exerts on a subwavelength-diameter optical fiber. Our theoretical results show that, during the propagating process, the guided light exerts no net time-averaged force on the fiber. Via numerical simulation, we find a significant overall pull force of 0.4 pN/mW acting on a 450-nm-diam fiber tip at a wavelength of 980 nm due to the scattering of the end face and a calculated force distribution reveals the feature of a near-field accumulation. Our results may be helpful to the configuration of optomechanical components or devices based on these fibers.

Onset patterns in a simple model of localized parametric forcing.

Science.gov (United States)

Porter, J; Tinao, I; Laverón-Simavilla, A; Rodríguez, J

2013-10-01

We investigate pattern selection at onset in a parametrically and inhomogeneously forced partial differential equation obtained by generalizing Mathieu's equation to include spatial interactions. No separation of scales is assumed. The proposed model is directly relevant to the case of parametrically forced surface waves, such as cross-waves, excited by the horizontal vibration of a fluid, where the forcing is localized to a finite region near the endwall or wavemaker. The availability of analytical solutions in the limit of piecewise constant forcing allows us investigate in detail the dependence of selected eigenfunctions on spatial detuning, forcing width, damping, boundary conditions, and container size. A wide range of onset patterns are located and described, many of which are rotated, modulated, or both, and deviate far from simple crosswise oriented standing waves. The linear selection mechanisms governing this multiplicity of potential onset patterns are discussed.

Against acts of nuclear terrorism; Gegen nuklearterroristische Handlungen

Energy Technology Data Exchange (ETDEWEB)

Heller, W.

2007-12-15

The Act on the International Convention of the United Nations of April 13, 2005 on Combating Acts of Nuclear Terrorism was promulgated in the German Federal Gazette and entered into force one day later. The Convention expresses the deep concern about the worldwide escalation of all kinds and manifestations of acts of terrorism. What was true in April 2005 (the year the UN convention was adopted) is even more true today. At the same time, however, the Convention recognizes the right of all nations to develop and use nuclear power for peaceful purposes, acknowledging their justified interest in the possible benefits of the peaceful uses of nuclear power. As the Convention was signed in German still during the term of office of the Red-Green government, this passage is a remarkable acceptance of the realities of the world and past peaceful uses of nuclear power in Germany. Whether or not the convention will become an effective instrument to be used against acts of nuclear terrorism and threats depends on its entering into force after deposition of 22 ratification documents, and on as many states as possible acceding to it. Irrespective of these aspects, action in the spirit of the Convention should be taken now, criminal law should be adapted, and international cooperation should be improved and strengthened. (orig.)

75 FR 67397 - Sunshine Act Meeting; Notice

Science.gov (United States)

2010-11-02

... select from among those candidates for further consideration. 3. Consider and act on other business. 4... LEGAL SERVICES CORPORATION Sunshine Act Meeting; Notice Time and Date: The Legal Services Corporation Board of Directors' Search Committee for LSC President (``Search Committee'' or ``Committee...

System of gait analysis based on ground reaction force assessment

Directory of Open Access Journals (Sweden)

František Vaverka

2015-12-01

Full Text Available Background: Biomechanical analysis of gait employs various methods used in kinematic and kinetic analysis, EMG, and others. One of the most frequently used methods is kinetic analysis based on the assessment of the ground reaction forces (GRF recorded on two force plates. Objective: The aim of the study was to present a method of gait analysis based on the assessment of the GRF recorded during the stance phase of two steps. Methods: The GRF recorded with a force plate on one leg during stance phase has three components acting in directions: Fx - mediolateral, Fy - anteroposterior, and Fz - vertical. A custom-written MATLAB script was used for gait analysis in this study. This software displays instantaneous force data for both legs as Fx(t, Fy(t and Fz(t curves, automatically determines the extremes of functions and sets the visual markers defining the individual points of interest. Positions of these markers can be easily adjusted by the rater, which may be necessary if the GRF has an atypical pattern. The analysis is fully automated and analyzing one trial takes only 1-2 minutes. Results: The method allows quantification of temporal variables of the extremes of the Fx(t, Fy(t, Fz(t functions, durations of the braking and propulsive phase, duration of the double support phase, the magnitudes of reaction forces in extremes of measured functions, impulses of force, and indices of symmetry. The analysis results in a standardized set of 78 variables (temporal, force, indices of symmetry which can serve as a basis for further research and diagnostics. Conclusions: The resulting set of variable offers a wide choice for selecting a specific group of variables with consideration to a particular research topic. The advantage of this method is the standardization of the GRF analysis, low time requirements allowing rapid analysis of a large number of trials in a short time, and comparability of the variables obtained during different research measurements.

BUILDING AN EFFECTIVE SALES FORCE

Directory of Open Access Journals (Sweden)

Ioana Olariu

2016-06-01

Full Text Available Building an effective sales force starts with selecting good salespeople, but good salespeople are very difficult to find. The reason for this is that most sales jobs are very demanding and require a great deal from the salesperson. There are many different types of sales jobs. Before it can hire salespeople, each company must do a careful job analysis to see what particular types of selling and other skills are necessary for each sales job. One task of the market planner is to establish clear objectives each year for the entire sales force, for each region, each sales office, and each salesperson. Sales jobs are different from in-house jobs in some significant ways. Nevertheless, each company must continually work on building and maintaining an effective sales force using the following steps: recruitment, selection, training, compensation and evaluation of each salesperson.

Postcopulatory sexual selection is associated with reduced variation in sperm morphology.

Directory of Open Access Journals (Sweden)

Sara Calhim

2007-05-01

Full Text Available The evolutionary role of postcopulatory sexual selection in shaping male reproductive traits, including sperm morphology, is well documented in several taxa. However, previous studies have focused almost exclusively on the influence of sperm competition on variation among species. In this study we tested the hypothesis that intraspecific variation in sperm morphology is driven by the level of postcopulatory sexual selection in passerine birds.Using two proxy measures of sperm competition level, (i relative testes size and (ii extrapair paternity level, we found strong evidence that intermale variation in sperm morphology is negatively associated with the degree of postcopulatory sexual selection, independently of phylogeny.Our results show that the role of postcopulatory sexual selection in the evolution of sperm morphology extends to an intraspecific level, reducing the variation towards what might be a species-specific 'optimum' sperm phenotype. This finding suggests that while postcopulatory selection is generally directional (e.g., favouring longer sperm across avian species, it also acts as a stabilising evolutionary force within species under intense selection, resulting in reduced variation in sperm morphology traits. We discuss some potential evolutionary mechanisms for this pattern.

Students’ understanding of forces: Force diagrams on horizontal and inclined plane

Science.gov (United States)

Sirait, J.; Hamdani; Mursyid, S.

2018-03-01

This study aims to analyse students’ difficulties in understanding force diagrams on horizontal surfaces and inclined planes. Physics education students (pre-service physics teachers) of Tanjungpura University, who had completed a Basic Physics course, took a Force concept test which has six questions covering three concepts: an object at rest, an object moving at constant speed, and an object moving at constant acceleration both on a horizontal surface and on an inclined plane. The test is in a multiple-choice format. It examines the ability of students to select appropriate force diagrams depending on the context. The results show that 44% of students have difficulties in solving the test (these students only could solve one or two items out of six items). About 50% of students faced difficulties finding the correct diagram of an object when it has constant speed and acceleration in both contexts. In general, students could only correctly identify 48% of the force diagrams on the test. The most difficult task for the students in terms was identifying the force diagram representing forces exerted on an object on in an inclined plane.

Calculation of forces acting on an impurity in a metal subjected to a temperature gradient

International Nuclear Information System (INIS)

Gerl, M.

1966-01-01

In a metal subject to a temperature gradient, an impurity is submitted to both an electrostatic force due to the thermoelectric field and a force due to the scattering of electrons and phonons by this point defect. The scattering of the electrons is treated using a semi-classical approach and a quantum mechanical method. The numerical computation for several impurities in Cu, Ag, and Au requires the knowledge of the resistivity cross-section. and of the thermoelectric power of the impurity in the metal. A tentative estimation of the force due to the phonon-scattering is given for the self-diffusion in Cu. However, the approximations of this calculation do not allow a good comparison with the force due to the electrons. (author) [fr

Reorganised force control in elbow pain patients during isometric wrist extension

DEFF Research Database (Denmark)

Mista, Christian Ariel; Monterde, Sonia; Inglés, Montserrat

2018-01-01

INTRODUCTION: Reorganised force control may be an important adaptation following painful traumas. In this study, force control adaptations were assessed in elbow pain patients. Increasing the contraction demand may overcome pain interference on the motor control and as such act as an internal...... voluntary contraction. Pressure pain thresholds were recorded at the lateral epicondyle and tibialis anterior muscle. Contraction force was recorded using a three-directional force transducer. Participants performed contractions according with visual feedback of the task-related force intensity (main...... direction of wrist extension) and another set of contractions with feedback of the three force directions. Going from the simple to the detailed force feedback will increase the demand of the motor task. Force steadiness in all 3 dimensions and force direction was extracted. RESULTS: Compared with controls...

Air traffic security act unconstitutional

International Nuclear Information System (INIS)

Heller, W.

2006-01-01

In the interest of more effective protective measures against terrorist attacks, the German federal parliament inter alia added a clause to the Air Traffic Security Act (Sec. 14, Para. 3, Air Traffic Security Act) empowering the armed forces to shoot down aircraft to be used as a weapon against human lives. In Germany, this defense possibility has been discussed also in connection with deliberate crashes of hijacked aircraft on nuclear power plants. The 1 st Division of the German Federal Constitutional Court, in its decision of February 15, 2006, ruled that Sec. 14, Para. 3, Air Traffic Security Act was incompatible with the Basic Law and thus was null and void (file No. 1 BvR 357/05) for two reasons: - There was no legislative authority on the part of the federal government. - The provision was incompatible with the basic right of life and the guarantee of human dignity as enshrined in the Basic Law. (orig.)

Utilizing Forced Vital Capacity to Predict Low Lung Compliance and Select Intraoperative Tidal Volume During Thoracic Surgery.

Science.gov (United States)

Hoftman, Nir; Eikermann, Eric; Shin, John; Buckley, Jack; Navab, Kaveh; Abtin, Fereidoun; Grogan, Tristan; Cannesson, Maxime; Mahajan, Aman

2017-12-01

Tidal volume selection during mechanical ventilation utilizes dogmatic formulas that only consider a patient's predicted body weight (PBW). In this study, we investigate whether forced vital capacity (FVC) (1) correlates better to total lung capacity (TLC) than PBW, (2) predicts low pulmonary compliance, and (3) provides an alternative method for tidal volume selection. One hundred thirty thoracic surgery patients had their preoperative TLC calculated via 2 methods: (1) pulmonary function test (PFT; TLCPFT) and (2) computed tomography 3D reconstruction (TLCCT). We compared the correlation between TLC and PBW with the correlation between TLC and FVC to determine which was stronger. Dynamic pulmonary compliance was then calculated from intraoperative ventilator data and logistic regression models constructed to determine which clinical measure best predicted low compliance. Ratios of tidal volume/FVC plotted against peak inspiratory pressure were utilized to construct a new model for tidal volume selection. Calculated tidal volumes generated by this model were then compared with those generated by the standard lung-protective formula Vt = 7 cc/kg. The correlation between FVC and TLC (0.82 for TLCPFT and 0.76 for TLCCT) was stronger than the correlation between PBW and TLC (0.65 for TLCPFT and 0.58 for TLCCT). Patients with very low compliance had significantly smaller lung volumes (forced expiratory volume at 1 second, FVC, TLC) and lower diffusion capacity of the lungs for carbon monoxide when compared with patients with normal compliance. An FVC cutoff of 3470 cc was 100% sensitive and 51% specific for predicting low compliance. The proposed equation Vt = FVC/8 significantly reduced calculated tidal volume by a mean of 22.5% in patients with low pulmonary compliance without affecting the mean tidal volume in patients with normal compliance (mean difference 0.9%). FVC is more strongly correlated to TLC than PBW and a cutoff of about 3.5 L can be utilized to predict

Selected mode of dendritic growth with n-fold symmetry in the presence of a forced flow

Science.gov (United States)

Alexandrov, D. V.; Galenko, P. K.

2017-07-01

The effect of n-fold crystal symmetry is investigated for a two-dimensional stable dendritic growth in the presence of a forced convective flow. We consider dendritic growth in a one-component undercooled liquid. The theory is developed for the parabolic solid-liquid surface of dendrite growing at arbitrary growth Péclet numbers keeping in mind small anisotropies of surface energy and growth kinetics. The selection criterion determining the stable growth velocity of the dendritic tip and its stable tip diameter is found on the basis of solvability analysis. The obtained criterion includes previously developed theories of thermally and kinetically controlled dendritic growth with convection for the case of four-fold crystal symmetry. The obtained nonlinear system of equations (representing the selection criterion and undercooling balance) for the determination of dendrite tip velocity and dendrite tip diameter is analytically solved in a parametric form. These exact solutions clearly demonstrate a transition between thermally and kinetically controlled growth regimes. In addition, we show that the dendrites with larger crystal symmetry grow faster than those with smaller symmetry.

76 FR 32224 - Migratory Birds; Take of Migratory Birds by the Armed Forces

Science.gov (United States)

2011-06-03

... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service Migratory Birds; Take of Migratory Birds by... Forces to incidentally take migratory birds during approved military readiness activities without violating the Migratory Bird Treaty Act (MBTA). The Authorization Act provided this interim authority to...

Origins of hydrodynamic forces on centrifugal pump impellers

Science.gov (United States)

Adkins, Douglas R.; Brennen, Christopher E.

1987-01-01

Hydrodynamic interactions that occur between a centrifugal pump impeller and volute are experimentally and theoretically investigated. The theoretical analysis considers the inability of the blades to perfectly guide the flow through the impeller, and also includes a quasi-one dimensional treatment of the flow in the volute. The disturbance at the impeller discharge and the resulting forces are determined by the theoretical model. The model is then extended to obtain the hydrodynamic force perturbations that are caused by the impeller whirling eccentrically in the volute. Under many operating conditions, these force perturbations were found to be destablizing. Comparisons are made between the theoretical model and the experimental measurements of pressure distributions and radial forces on the impeller. The theoretical model yields fairly accurate predictions of the radial forces caused by the flow through the impeller. However, it was found that the pressure acting on the front shroud of the impeller has a substantial effect on the destablizing hydrodynamic forces.

Microtubules as mechanical force sensors.

Science.gov (United States)

Karafyllidis, Ioannis G; Lagoudas, Dimitris C

2007-03-01

Microtubules are polymers of tubulin subunits (dimers) arranged on a hexagonal lattice. Each tubulin dimer comprises two monomers, the alpha-tubulin and beta-tubulin, and can be found in two states. In the first state a mobile negative charge is located into the alpha-tubulin monomer and in the second into the beta-tubulin monomer. Each tubulin dimer is modeled as an electrical dipole coupled to its neighbors by electrostatic forces. The location of the mobile charge in each dimer depends on the location of the charges in the dimer's neighborhood. Mechanical forces that act on the microtubule affect the distances between the dimers and alter the electrostatic potential. Changes in this potential affect the mobile negative charge location in each dimer and the charge distribution in the microtubule. The net effect is that mechanical forces affect the charge distribution in microtubules. We propose to exploit this effect and use microtubules as mechanical force sensors. We model each dimer as a two-state quantum system and, following the quantum computation paradigm, we use discrete quantum random walk on the hexagonal microtubule lattice to determine the charge distribution. Different forces applied on the microtubule are modeled as different coin biases leading to different probability distributions of the quantum walker location, which are directly connected to different charge distributions. Simulation results show that there is a strong indication that microtubules can be used as mechanical force sensors and that they can also detect the force directions and magnitudes.

The selective orexin receptor 1 antagonist ACT-335827 in a rat model of diet-induced obesity associated with metabolic syndrome.

Science.gov (United States)

Steiner, Michel A; Sciarretta, Carla; Pasquali, Anne; Jenck, Francois

2013-01-01

The orexin system regulates feeding, nutrient metabolism and energy homeostasis. Acute pharmacological blockade of orexin receptor 1 (OXR-1) in rodents induces satiety and reduces normal and palatable food intake. Genetic OXR-1 deletion in mice improves hyperglycemia under high-fat (HF) diet conditions. Here we investigated the effects of chronic treatment with the novel selective OXR-1 antagonist ACT-335827 in a rat model of diet-induced obesity (DIO) associated with metabolic syndrome (MetS). Rats were fed either standard chow (SC) or a cafeteria (CAF) diet comprised of intermittent human snacks and a constant free choice between a HF/sweet (HF/S) diet and SC for 13 weeks. Thereafter the SC group was treated with vehicle (for 4 weeks) and the CAF group was divided into a vehicle and an ACT-335827 treatment group. Energy and water intake, food preference, and indicators of MetS (abdominal obesity, glucose homeostasis, plasma lipids, and blood pressure) were monitored. Hippocampus-dependent memory, which can be impaired by DIO, was assessed. CAF diet fed rats treated with ACT-335827 consumed less of the HF/S diet and more of the SC, but did not change their snack or total kcal intake compared to vehicle-treated rats. ACT-335827 increased water intake and the high-density lipoprotein associated cholesterol proportion of total circulating cholesterol. ACT-335827 slightly increased body weight gain (4% vs. controls) and feed efficiency in the absence of hyperphagia. These effects were not associated with significant changes in the elevated fasting glucose and triglyceride (TG) plasma levels, glucose intolerance, elevated blood pressure, and adiposity due to CAF diet consumption. Neither CAF diet consumption alone nor ACT-335827 affected memory. In conclusion, the main metabolic characteristics associated with DIO and MetS in rats remained unaffected by chronic ACT-335827 treatment, suggesting that pharmacological OXR-1 blockade has minimal impact in this model.

The selective orexin receptor 1 antagonist ACT-335827 in a rat model of diet-induced obesity associated with metabolic syndrome

Directory of Open Access Journals (Sweden)

Michel Alexander Steiner

2013-12-01

Full Text Available The orexin system regulates feeding, nutrient metabolism and energy homeostasis. Acute pharmacological blockade of orexin receptor 1 (OXR-1 in rodents induces satiety and reduces normal and palatable food intake. Genetic OXR-1 deletion in mice improves hyperglycemia under high-fat (HF diet conditions. Here we investigated the effects of chronic treatment with the novel selective OXR-1 antagonist ACT-335827 in a rat model of diet-induced obesity (DIO associated with metabolic syndrome (MetS. Rats were fed either standard chow (SC or a cafeteria (CAF diet comprised of intermittent human snacks and a constant free choice between a HF/sweet (HF/S diet and SC for 13 weeks. Thereafter the SC group was treated with vehicle (for 4 weeks and the CAF group was divided into a vehicle and an ACT-335827 treatment group. Energy and water intake, food preference, and indicators of MetS (abdominal obesity, glucose homeostasis, plasma lipids, and blood pressure were monitored. Hippocampus-dependent memory, which can be impaired by DIO, was assessed. CAF diet fed rats treated with ACT-335827 consumed less of the HF/S diet and more of the SC, but did not change their snack or total kcal intake compared to vehicle-treated rats. ACT-335827 increased water intake and the high-density lipoprotein associated cholesterol proportion of total circulating cholesterol. ACT-335827 slightly increased body weight gain (4% versus controls and feed efficiency in the absence of hyperphagia. These effects were not associated with significant changes in the elevated fasting glucose and triglyceride (TG plasma levels, glucose intolerance, elevated blood pressure, and adiposity due to CAF diet consumption. Neither CAF diet consumption alone nor ACT-335827 affected memory. In conclusion, the main metabolic characteristics associated with DIO and MetS in rats remained unaffected by chronic ACT-335827 treatment, suggesting that pharmacological OXR-1 blockade has minimal impact in this

Awareness and Perception of Housewives in Selected Municipalities of Palawan Regarding R.A. 9262 (Anti-Violence against Women and their Children Act of 2004

Directory of Open Access Journals (Sweden)

Dr. Cecilia S. Santiago

2014-10-01

Full Text Available This study was conducted to determine the level of awareness and perception of housewives in selected municipalities of Palawan regarding R.A. 9262. Specifically, it aimed to determine the demographic characteristics of the respondents; to identify the level of awareness of housewives regarding R.A. 9262; and to find out their perception regarding the Act. Seven municipalities which include Aborlan, Narra, Brooke’s Point, Quezon, Rizal, Bataraza and El Nido were the study sites. One hundred women from each municipality were purposely selected that served as respondents with a total of 700. Those considered were married, with husband at present and who has children. The survey questionnaire which was translated in Filipino was composed of two parts. Part one was about the demographic characteristics of the respondents while part two dealt on statements about acts of violence against women & their children as stated in RA 9262 that determined the level of awareness & perception on the provisions of the said Republic Act. Results revealed that the mean age of the respondents was 38.39 years old and the mean number of children was 3.63. In addition, most of the respondents were plain housewives has 3-4 children, high school graduates and within the PhP 5,000.00 and below bracket of monthly income. With regards to the level of awareness, majority of the respondents were moderately aware of the provisions of R.A. 9262. As to the perception of the respondents, they strongly agree that the provisions or statements are considered acts of violence against women and their children. Based on the results of the study, an Action Plan will be proposed which will focus on the enhancement of the housewives’ awareness regarding R.A. 9262 to provide information and make them fully aware of the provisions of the republic act and be safe from domestic violence.

Homologous recombination is a force in the evolution of canine distemper virus.

Science.gov (United States)

Yuan, Chaowen; Liu, Wenxin; Wang, Yingbo; Hou, Jinlong; Zhang, Liguo; Wang, Guoqing

2017-01-01

Canine distemper virus (CDV) is the causative agent of canine distemper (CD) that is a highly contagious, lethal, multisystemic viral disease of receptive carnivores. The prevalence of CDV is a major concern in susceptible animals. Presently, it is unclear whether intragenic recombination can contribute to gene mutations and segment reassortment in the virus. In this study, 25 full-length CDV genome sequences were subjected to phylogenetic and recombinational analyses. The results of phylogenetic analysis, intragenic recombination, and nucleotide selection pressure indicated that mutation and recombination occurred in the six individual genes segment (H, F, P, N, L, M) of the CDV genome. The analysis also revealed pronounced genetic diversity in the CDV genome according to the geographically distinct lineages (genotypes), namely Asia-1, Asia-2, Asia-3, Europe, America-1, and America-2. The six recombination events were detected using SimPlot and RDP programs. The analysis of selection pressure demonstrated that a majority of the nucleotides in the CDV individual gene were under negative selection. Collectively, these data suggested that homologous recombination acts as a key force driving the genetic diversity and evolution of canine distemper virus.

Forces acting on a small particle in an acoustical field in a thermoviscous fluid.

Science.gov (United States)

Karlsen, Jonas T; Bruus, Henrik

2015-10-01

We present a theoretical analysis of the acoustic radiation force on a single small spherical particle, either a thermoviscous fluid droplet or a thermoelastic solid particle, suspended in a viscous and heat-conducting fluid medium. Within the perturbation assumptions, our analysis places no restrictions on the length scales of the viscous and thermal boundary-layer thicknesses δ(s) and δ(t) relative to the particle radius a, but it assumes the particle to be small in comparison to the acoustic wavelength λ. This is the limit relevant to scattering of ultrasound waves from nanometer- and micrometer-sized particles. For particles of size comparable to or smaller than the boundary layers, the thermoviscous theory leads to profound consequences for the acoustic radiation force. Not only do we predict forces orders of magnitude larger than expected from ideal-fluid theory, but for certain relevant choices of materials, we also find a sign change in the acoustic radiation force on different-sized but otherwise identical particles. These findings lead to the concept of a particle-size-dependent acoustophoretic contrast factor, highly relevant to acoustic separation of microparticles in gases, as well as to handling of nanoparticles in lab-on-a-chip systems.

Friction Force: From Mechanics to Thermodynamics

Science.gov (United States)

Ferrari, Christian; Gruber, Christian

2010-01-01

We study some mechanical problems in which a friction force is acting on a system. Using the fundamental concepts of state, time evolution and energy conservation, we explain how to extend Newtonian mechanics to thermodynamics. We arrive at the two laws of thermodynamics and then apply them to investigate the time evolution and heat transfer of…

Nonlinear dynamic analysis of piping systems using the pseudo force method

International Nuclear Information System (INIS)

Prachuktam, S.; Bezler, P.; Hartzman, M.

1979-01-01

Simple piping systems are composed of linear elastic elements and can be analyzed using conventional linear methods. The introduction of constraint springs separated from the pipe with clearance gaps to such systems to cope with the pipe whip or other extreme excitation conditions introduces nonlinearities to the system, the nonlinearities being associated with the gaps. Since these spring-damper constraints are usually limited in number, descretely located, and produce only weak nonlinearities, the analysis of linear systems including these nonlinearities can be carried out by using modified linear methods. In particular, the application of pseudo force methods wherein the nonlinearities are treated as displacement dependent forcing functions acting on the linear system were investigated. The nonlinearities induced by the constraints are taken into account as generalized pseudo forces on the right-hand side of the governing dynamic equilibrium equations. Then an existing linear elastic finite element piping code, EPIPE, was modified to permit application of the procedure. This option was inserted such that the analyses could be performed using either the direct integration method or via a modal superposition method, the Newmark-Beta integration procedure being employed in both methods. The modified code was proof tested against several problems taken from the literature or developed with the nonlinear dynamics code OSCIL. The problems included a simple pipe loop, cantilever beam, and lumped mass system subjected to pulsed and periodic forcing functions. The problems were selected to gage the overall accuracy of the method and to insure that it properly predicted the jump phenomena associated with nonlinear systems. (orig.)

Are skeletal muscles independent actuators? Force transmission from soleus muscle in the cat

NARCIS (Netherlands)

Maas, H.; Sandercock, T.G.

2008-01-01

It is unclear if skeletal muscles act mechanically as independent actuators. The purpose of the present study was to investigate force transmission from soleus (SO) muscle for physiological lengths as well as relative positions in the intact cat hindlimb. We hypothesized that force transmission from

Change Forces: Implementing Change in a Secondary School for the Common Good

Science.gov (United States)

Melville, Wayne; Bartley, Anthony; Weinburgh, Molly

2012-01-01

In this article, we investigate the change forces that act on administrators, subject department chairpersons and teachers as they seek to implement a change in a Canadian secondary school. Using a case study methodology, our analysis of the data uses Sergiovanni's (1998) six change forces: bureaucratic, personal, market, professional, cultural,…

On the estimation method of hydrodynamic forces acting on a huge floating structure; Choogata futai ni hataraku haryoku ryutairyoku no suiteiho ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Kagemoto, H.; Fujino, M.; Zhu, T. [The University of Tokyo, Tokyo (Japan)

1996-12-31

A floating structure such as an international airport is anticipated to have a length of about 5,000 m and a width of about 1,000 m. A singular point method may be used as a method to estimate force that such a floating body is subjected to from waves. In order to derive a solution with practically sufficient accuracy, 1250 elements are required in the length direction and 250 elements in the width direction, or a total of 312,500 elements. Calculating this number of elements should use finally a linear equation system handling complex coefficients comprising 312,500 elements, which would require a huge amount of calculation time. This paper proposes a method to derive solution on wave forces acting on a super-large floating structure or fluid force coefficients such as added mass coefficients and decay coefficients at a practically workable calculation amount and still without degrading the accuracy. The structure was assumed to be a box-shaped structure. Strengths of the singular points to be distributed on each element were assumed to be almost constant except for edges in lateral, oblique and longitudinal waves. Under this assumption, the interior of the floating structure excepting its edges was represented by several large elements to have reduced the number of elements. A calculation method proposed based on this conception was verified of its effectiveness. 2 refs., 25 figs., 3 tabs.

Forced underwater laminar flows with active magnetohydrodynamic metamaterials

Science.gov (United States)

Culver, Dean; Urzhumov, Yaroslav

2017-12-01

Theory and practical implementations for wake-free propulsion systems are proposed and proven with computational fluid dynamic modeling. Introduced earlier, the concept of active hydrodynamic metamaterials is advanced by introducing magnetohydrodynamic metamaterials, structures with custom-designed volumetric distribution of Lorentz forces acting on a conducting fluid. Distributions of volume forces leading to wake-free, laminar flows are designed using multivariate optimization. Theoretical indications are presented that such flows can be sustained at arbitrarily high Reynolds numbers. Moreover, it is shown that in the limit Re ≫102 , a fixed volume force distribution may lead to a forced laminar flow across a wide range of Re numbers, without the need to reconfigure the force-generating metamaterial. Power requirements for such a device are studied as a function of the fluid conductivity. Implications to the design of distributed propulsion systems underwater and in space are discussed.

The selective orexin receptor 1 antagonist ACT-335827 in a rat model of diet-induced obesity associated with metabolic syndrome

OpenAIRE

Steiner, Michel A.; Sciarretta, Carla; Pasquali, Anne; Jenck, Francois

2013-01-01

The orexin system regulates feeding, nutrient metabolism and energy homeostasis. Acute pharmacological blockade of orexin receptor 1 (OXR-1) in rodents induces satiety and reduces normal and palatable food intake. Genetic OXR-1 deletion in mice improves hyperglycemia under high-fat (HF) diet conditions. Here we investigated the effects of chronic treatment with the novel selective OXR-1 antagonist ACT-335827 in a rat model of diet-induced obesity (DIO) associated with metabolic syndrome (MetS...

A standing pressure wave hypothesis of oscillating forces generated during a steam line break

International Nuclear Information System (INIS)

Tinoco, H.

2001-01-01

A rapid glance at the figure depicting the net forces acting on the reactor vessel and internals, as obtained through a CFD simulation of a BWR steam line break, reveals an amazing oscillating regularity of these forces which is in glaring contrast to the chaotic behaviour of the steam pressure field in the steam annulus. Assuming that the decompression process excites and maintains standing pressure waves in the annular cylindrical region constituted by the steam annulus, it is possible to reconstruct the net forces acting on the reactor vessel and internals through the contribution of almost only the first dispersive mode. If a Neumann boundary condition is assumed at the section connecting the steam annulus to the steam dome, the frequency predicted is approximately % 5.9 higher than that of the CFD simulations. However, this connecting section allows wave transmission, and a more appropriate boundary condition should be one of the Robin type. Therefore, this section is modelled as an absorbing wall, and the corresponding normal impedance is calculated using the CFD simulations. Week non-linear effects can also be observed in the calculated forces through the presence of the first subharmonic. By the methodology described above, an estimate of the forces acting on the reactor vessel and internals of unit 3 of Forsmark Nuclear Power Plant has been obtained. (author)

The Bribery Act 2010: an overview for district nurses.

Science.gov (United States)

Griffith, Richard; Tengnah, Cassam

2012-10-01

The Bribery Act 2010 has been in force for a little over a year and has already served to reinforce the need for NHS organisations to adopt a proactive approach to preventing any suggestion that their staff are accepting inducements, in the form of gifts or hospitality, that could influence their performance. The robust policies on the acceptance of gifts and hospitality demanded by the 2010 Act require district nurses to be very cautious when offered a gift by a patient or commercial organisation. This article considers the implications of the Bribery Act 2010 on district nurse practice and the implications of failing to meet its provisions.

75 FR 19377 - Privacy Act of 1974; Systems of Records

Science.gov (United States)

2010-04-14

.... 552a(r), of the Privacy Act of 1974, as amended, were submitted on March 31, 2010, to the House..., forced password-change protocols or also equipped with ``Smart Card'' technology that requires the...

Monitoring ligand-receptor interactions by photonic force microscopy

Energy Technology Data Exchange (ETDEWEB)

Jeney, Sylvia [M E Mueller Institute for Structural Biology, Biozentrum, University of Basel, Klingelbergstrasse 70, Basel, 4056 (Switzerland); Mor, Flavio; Forro, Laszlo [Laboratory of Complex Matter Physics (LPMC), Ecole Polytechnique Federale de Lausanne (EPFL), CH-1015 Lausanne (Switzerland); Koszali, Roland [Institute for Information and Communication Technologies (IICT), University of Applied Sciences of Western Switzerland (HEIG-VD), Rue Galilee 15, CH 1401 Yverdon-les-bains (Switzerland); Moy, Vincent T, E-mail: sylvia.jeney@unibas.ch, E-mail: vmoy@miami.edu [Department of Physiology and Biophysics, University of Miami Miller School of Medicine, 1600 NW 10th Avenue, Miami, FL 33136 (United States)

2010-06-25

We introduce a method for the acquisition of single molecule force measurements of ligand-receptor interactions using the photonic force microscope (PFM). Biotin-functionalized beads, manipulated with an optical trap, and a streptavidin-functionalized coverslip were used to measure the effect of different pulling forces on the lifetime of individual streptavidin-biotin complexes. By optimizing the design of the optical trap and selection of the appropriate bead size, pulling forces in excess of 50 pN were achieved. Based on the amplitude of three-dimensional (3D) thermal position fluctuations of the attached bead, we were able to select for a bead-coverslip interaction that was mediated by a single streptavidin-biotin complex. Moreover, the developed experimental system was greatly accelerated by automation of data acquisition and analysis. In force-dependent kinetic measurements carried out between streptavidin and biotin, we observed that the streptavidin-biotin complex exhibited properties of a catch bond, with the lifetime increasing tenfold when the pulling force increased from 10 to 20 pN. We also show that silica beads were more appropriate than polystyrene beads for the force measurements, as tethers, longer than 200 nm, could be extracted from polystyrene beads.

Monitoring ligand-receptor interactions by photonic force microscopy

International Nuclear Information System (INIS)

Jeney, Sylvia; Mor, Flavio; Forro, Laszlo; Koszali, Roland; Moy, Vincent T

2010-01-01

We introduce a method for the acquisition of single molecule force measurements of ligand-receptor interactions using the photonic force microscope (PFM). Biotin-functionalized beads, manipulated with an optical trap, and a streptavidin-functionalized coverslip were used to measure the effect of different pulling forces on the lifetime of individual streptavidin-biotin complexes. By optimizing the design of the optical trap and selection of the appropriate bead size, pulling forces in excess of 50 pN were achieved. Based on the amplitude of three-dimensional (3D) thermal position fluctuations of the attached bead, we were able to select for a bead-coverslip interaction that was mediated by a single streptavidin-biotin complex. Moreover, the developed experimental system was greatly accelerated by automation of data acquisition and analysis. In force-dependent kinetic measurements carried out between streptavidin and biotin, we observed that the streptavidin-biotin complex exhibited properties of a catch bond, with the lifetime increasing tenfold when the pulling force increased from 10 to 20 pN. We also show that silica beads were more appropriate than polystyrene beads for the force measurements, as tethers, longer than 200 nm, could be extracted from polystyrene beads.

Selective effects of different fatigue protocols on the function of upper body muscles assessed through the force-velocity relationship.

Science.gov (United States)

García-Ramos, Amador; Torrejón, Alejandro; Feriche, Belén; Morales-Artacho, Antonio J; Pérez-Castilla, Alejandro; Padial, Paulino; Jaric, Slobodan

2018-02-01

This study explored the feasibility of the force-velocity relationship (F-V) to detect the acute effects of different fatigue protocols on the selective changes of the maximal capacities of upper body muscles to produce force, velocity, and power. After determining the bench press one-repetition maximum (1RM), participants' F-V relationships were assessed during the bench press throw exercise on five separate sessions after performing one of the following fatiguing protocols: 60%1RM failure, 60%1RM non-failure, 80%1RM failure, 80%1RM non-failure, and no-fatigue. In the non-failure protocols, participants performed half the maximum number of repetitions than in their respective failure protocols. The main findings revealed that (1) all F-V relationships were highly linear (median r = 0.997 and r = 0.982 for averaged across participants and individual data, respectively), (2) the fatiguing protocols were ranked based on the magnitude of power loss as follows: 60%1RM failure > 80%1RM failure > 60%1RM non-failure > 80%1RM non-failure, while (3) the assessed maximum force and velocity outputs showed a particularly prominent reduction in the protocols based on the lowest and highest levels of fatigue (i.e., 80%1RM non-failure and 60%1RM failure), respectively. The results support the use of F-V to assess the effects of fatigue on the distinctive capacities of the muscles to produce force, velocity, and power output while performing multi-joint tasks, while the assessed maximum force and velocity capacities showed a particularly prominent reduction in the protocols based on the lowest and highest levels of fatigue (i.e., 80%1RM non-failure and 60%1RM failure), respectively.

Forces acting on a small particle in an acoustical field in a thermoviscous fluid

DEFF Research Database (Denmark)

Karlsen, Jonas Tobias; Bruus, Henrik

2015-01-01

We present a theoretical analysis of the acoustic radiation force on a single small spherical particle, either a thermoviscous fluid droplet or a thermoelastic solid particle, suspended in a viscous and heat-conducting fluid medium. Within the perturbation assumptions, our analysis places no rest...... as to handling of nanoparticles in lab-on-a-chip systems.......We present a theoretical analysis of the acoustic radiation force on a single small spherical particle, either a thermoviscous fluid droplet or a thermoelastic solid particle, suspended in a viscous and heat-conducting fluid medium. Within the perturbation assumptions, our analysis places...... of materials, we also find a sign change in the acoustic radiation force on different-sized but otherwise identical particles. These findings lead to the concept of a particle-size-dependent acoustophoretic contrast factor, highly relevant to acoustic separation of microparticles in gases, as well...

Magnus force on quantum Hall skyrmions and vortices

International Nuclear Information System (INIS)

Dhar, S.; Basu, B.; Bandyopadhyay, P.

2003-01-01

We have discussed here the Magnus force acting on the vortices and skyrmions in the quantum Hall systems. We have found that it is generated by the chirality of the system which is associated with the Berry phase and is same for both the cases

Serotonergic mediation of the effects of fluoxetine, but not desipramine, in the rat forced swimming test.

Science.gov (United States)

Page, M E; Detke, M J; Dalvi, A; Kirby, L G; Lucki, I

1999-11-01

The forced swimming test (FST) is a behavioral test in rodents that predicts the clinical efficacy of many types of antidepressant treatments. Recently, a behavior sampling technique was developed that scores individual response categories, including swimming, climbing and immobility. Although all antidepressant drugs reduce immobility in the FST, at least two distinct active behavioral patterns are produced by pharmacologically selective antidepressant drugs. Serotonin-selective reuptake inhibitors increase swimming behavior, while drugs acting primarily to increase extracellular levels of norepinephrine or dopamine increase climbing behavior. Distinct patterns of active behaviors in the FST may be mediated by distinct neurotransmitters, but this has not been shown directly. The present study examined the role of serotonin in mediating active behaviors in the forced swimming test after treatment with two antidepressant drugs, the selective serotonin reuptake inhibitor, fluoxetine and the selective norepinephrine reuptake inhibitor, desipramine. Endogenous serotonin was depleted by administering para-cholorophenylalanine (PCPA, 150 mg/kg, IP.) to rats 72 h and 48 h prior to the swim test. Fluoxetine (10 mg/kg, SC) or desipramine (10 mg/kg, SC) was given three times over a 24-h period prior to the FST. Behavioral responses, including immobility, swimming and climbing, were counted during the 5-min test. Pretreatment with PCPA blocked fluoxetine-induced reduction in immobility and increase in swimming behavior during the FST. In contrast, PCPA pretreatment did not interfere with the ability of desipramine to reduce immobility and increase climbing behavior. Depletion of serotonin prevented the behavioral effects of the selective serotonin reuptake inhibitor fluoxetine in the rat FST. Furthermore, depletion of serotonin had no impact on the behavioral effects induced by the selective norepinephrine reuptake inhibitor, desipramine. The effects of antidepressant drugs

Using Future Value Analysis to Select an Optimal Portfolio of Force Protection Initiatives

National Research Council Canada - National Science Library

Eskridge, Robert

2003-01-01

With the recent increase in terrorist activity, force protection has become a key issue for the Department of Defense, Leading the research for new ideas and concepts in force protection for the US...

Chiral forces and molecular dissymmetry

International Nuclear Information System (INIS)

Mohan, R.

1992-01-01

Chiral molecules leading to helical macromolecules seem to preserve information and extend it better. In the biological world RNA is the very paradigm for self-replication, elongation and autocatalytic editing. The nucleic acid itself is not chiral. It acquires its chirality by association with D-sugars. Although the chiral information or selectivity put in by the unit monomer is no longer of much interest to the biologists - they tend to leave it to the Darwinian selection principle to take care of it as illustrated by Frank's model - it is vital to understand the origin of chirality. There are three different approaches for the chiral origin of life: (1) Phenomenological, (2) Electromagnetic molecular and Coriolis forces and (3) Atomic or nuclear force, the neutral weak current. The phenomenological approach involves spontaneous symmetry breaking fluctuations in far for equilibrium systems or nucleation and crystallization. Chance plays a major role in the chiral molecule selected

Mathias-Prikry and Laver type forcing; Summable ideals, coideals, and +-selective filters

Czech Academy of Sciences Publication Activity Database

Chodounský, David; Guzmán Gonzáles, O.; Hrušák, M.

2016-01-01

Roč. 55, č. 3 (2016), s. 493-504 ISSN 0933-5846 R&D Projects: GA ČR(CZ) GF15-34700L Institutional support: RVO:67985840 Keywords : Mathias–Prikry forcing * Laver type forcing * Mathias like real Subject RIV: BA - General Mathematics Impact factor: 0.394, year: 2016 http://link.springer.com/article/10.1007/s00153-016-0476-9

Repulsive Casimir force from fractional Neumann boundary conditions

International Nuclear Information System (INIS)

Lim, S.C.; Teo, L.P.

2009-01-01

This Letter studies the finite temperature Casimir force acting on a rectangular piston associated with a massless fractional Klein-Gordon field at finite temperature. Dirichlet boundary conditions are imposed on the walls of a d-dimensional rectangular cavity, and a fractional Neumann condition is imposed on the piston that moves freely inside the cavity. The fractional Neumann condition gives an interpolation between the Dirichlet and Neumann conditions, where the Casimir force is known to be always attractive and always repulsive respectively. For the fractional Neumann boundary condition, the attractive or repulsive nature of the Casimir force is governed by the fractional order which takes values from zero (Dirichlet) to one (Neumann). When the fractional order is larger than 1/2, the Casimir force is always repulsive. For some fractional orders that are less than but close to 1/2, it is shown that the Casimir force can be either attractive or repulsive depending on the aspect ratio of the cavity and the temperature.

Constraint, natural selection, and the evolution of human body form.

Science.gov (United States)

Savell, Kristen R R; Auerbach, Benjamin M; Roseman, Charles C

2016-08-23

Variation in body form among human groups is structured by a blend of natural selection driven by local climatic conditions and random genetic drift. However, attempts to test ecogeographic hypotheses have not distinguished between adaptive traits (i.e., those that evolved as a result of selection) and those that evolved as a correlated response to selection on other traits (i.e., nonadaptive traits), complicating our understanding of the relationship between climate and morphological distinctions among populations. Here, we use evolutionary quantitative methods to test if traits previously identified as supporting ecogeographic hypotheses were actually adaptive by estimating the force of selection on individual traits needed to drive among-group differentiation. Our results show that not all associations between trait means and latitude were caused by selection acting directly on each individual trait. Although radial and tibial length and biiliac and femoral head breadth show signs of responses to directional selection matching ecogeographic hypotheses, the femur was subject to little or no directional selection despite having shorter values by latitude. Additionally, in contradiction to ecogeographic hypotheses, the humerus was under directional selection for longer values by latitude. Responses to directional selection in the tibia and radius induced a nonadaptive correlated response in the humerus that overwhelmed its own trait-specific response to selection. This result emphasizes that mean differences between groups are not good indicators of which traits are adaptations in the absence of information about covariation among characteristics.

Software Process Improvement Using Force Field Analysis ...

African Journals Online (AJOL)

An improvement plan is then drawn and implemented. This paper studied the state of Nigerian software development organizations based on selected attributes. Force field analysis is used to partition the factors obtained into driving and restraining forces. An attempt was made to improve the software development process ...

Can a Selective Serotonin Reuptake Inhibitor Act as a Glutamatergic Modulator?

Directory of Open Access Journals (Sweden)

Marcos Emilio Frizzo, PhD

2017-01-01

Full Text Available Sertraline (Zoloft and fluoxetine (Prozac are selective serotonin reuptake inhibitors whose antidepressant mechanism of action is classically attributed to an elevation of the extracellular levels of serotonin in the synaptic cleft. However, the biological effects of these drugs seem to be more complex than their traditionally described mechanism of action. Among their actions is the inhibition of different types of Na+ and K+ channels, as well as of glutamate uptake activity. The clearance of extracellular glutamate is essential to maintain the central nervous system within physiological conditions, and this excitatory neurotransmitter is removed from the synaptic cleft by astrocyte transporters. This transport depends upon a hyperpolarized membrane potential in astrocytes that is mainly maintained by Kir4.1 K+ channels. The impairment of the Kir4.1 channel activity reduces driving force for the glutamate transporter, resulting in an accumulation of extracellular glutamate. It has been shown that sertraline and fluoxetine inhibit Kir4.1 K+ channels. Recently, we demonstrated that sertraline reduces glutamate uptake in human platelets, which contain a high-affinity Na+-dependent glutamate uptake system, with kinetic and pharmacological properties similar to astrocytes in the central nervous system. Considering these similarities between human platelets and astrocytes, one might ask if sertraline could potentially reduce glutamate clearance in the synaptic cleft and consequently modulate glutamatergic transmission. This possibility merits investigation, since it may provide additional information regarding the mechanism of action and perhaps the side effects of these antidepressants.

UNDERSTANDING THE “HOUSEHOLDER DEFENCE”: PROPORTIONALITY AND REASONABLENESS IN DEFENSIVE FORCE

OpenAIRE

Dsouza, M.

2016-01-01

IN Collins v Secretary of State [2016] EWHC 33 (Admin), the High Court refused to declare that Criminal Justice and Immigration Act 2008, s. 76(5A) – the so-called “householder's defence” – was incompatible with the right to life enshrined in Article 2 of the ECHR, in that it failed to protect the lives of attackers sufficiently. Section 76(5A) was inserted into the 2008 Act by Crime and Courts Act 2013, s. 43, and came into force in April 2013.

α-Helix Unwinding as Force Buffer in Spectrins.

Science.gov (United States)

Takahashi, Hirohide; Rico, Felix; Chipot, Christophe; Scheuring, Simon

2018-03-27

Spectrins are cytoskeletal proteins located at the inner face of the plasma membrane, making connections between membrane anchors and the actin cortex, and between actin filaments. Spectrins share a common structure forming a bundle of 3 α-helices and play a major role during cell deformation. Here, we used high-speed force spectroscopy and steered molecular dynamics simulations to understand the mechanical stability of spectrin, revealing a molecular force buffering function. We find that spectrin acts as a soft spring at short extensions (70-100 Å). Under continuous external stretching, its α-helices unwind, leading to a viscous mechanical response over larger extensions (100-300 Å), represented by a constant-force plateau in force/extension curves. This viscous force buffering emerges from a quasi-equilibrium competition between disruption and re-formation of α-helical hydrogen bonds. Our results suggest that, in contrast to β-sheet proteins, which unfold in a catastrophic event, α-helical spectrins dominantly unwind, providing a viscous force buffer over extensions about 5 times their folded length.

Quantification of Staphylococcus aureus adhesion forces on various dental restorative materials using atomic force microscopy

Energy Technology Data Exchange (ETDEWEB)

Merghni, Abderrahmen, E-mail: abderrahmen_merghni@yahoo.fr [Laboratoire des Maladies Transmissibles et Substances biologiquement actives (LR99ES27) Faculté de Pharmacie de Monastir, Université de Monastir (Tunisia); Kammoun, Dorra [Laboratoire de Biomatériaux et Biotechnologie, Faculté de Médecine Dentaire, Monastir (Tunisia); Hentati, Hajer [Laboratoire de Recherche en Santé Orale et Réhabilitation Bucco-Faciale (LR12ES11), Faculté de Médecine Dentaire de Monastir, Université de Monastir (Tunisia); Janel, Sébastien [BioImaging Center Lille-FR3642, Lille (France); Popoff, Michka [Cellular Microbiology and Physics of Infection-CNRS UMR8204, INSERM U1019, Institut Pasteur de Lille, Lille University (France); Lafont, Frank [BioImaging Center Lille-FR3642, Lille (France); Cellular Microbiology and Physics of Infection-CNRS UMR8204, INSERM U1019, Institut Pasteur de Lille, Lille University (France); Aouni, Mahjoub [Laboratoire des Maladies Transmissibles et Substances biologiquement actives (LR99ES27) Faculté de Pharmacie de Monastir, Université de Monastir (Tunisia); Mastouri, Maha [Laboratoire des Maladies Transmissibles et Substances biologiquement actives (LR99ES27) Faculté de Pharmacie de Monastir, Université de Monastir (Tunisia); Laboratoire de Microbiologie, CHU Fattouma Bourguiba de Monastir (Tunisia)

2016-08-30

Highlights: • 4 dental restorative materials were characterized for roughness, angle contact water and surface free energy. • AFM adhesion forces of S. aureus to tested materials were achieved in presence and absence of salivary conditioning film. • S. aureus initial adhesion is dependent on the surface free energy and roughness. - Abstract: In the oral cavity dental restorative biomaterials can act as a reservoir for infection with opportunistic Staphylococcus aureus pathogen, which can lead to the occurrence of secondary caries and treatment failures. Our aim was to evaluate the adhesion forces by S. aureus on four dental restorative biomaterials and to correlate this finding to differences in specific surface characteristics. Additionally, the influence of salivary conditioning films in exerted adhesion forces was investigated. The substrate hydrophobicity was measured by goniometer and the surface free energy was calculated using the equilibrium advancing contact angle values of water, formamide, and diiodomethane on the tested surfaces. The surface roughness was determined using atomic force microscope (AFM). Additionally, cell force spectroscopy was achieved to quantify the forces that drive cell-substrate interactions. S. aureus bacterium exerted a considerable adhesion forces on various dental restorative materials, which decreased in the presence of saliva conditioning film. The influence of the surface roughness and free energy in initial adhesion appears to be more important than the effect of hydrophobicity, either in presence or absence of saliva coating. Hence, control of surface properties of dental restorative biomaterials is of crucial importance in preventing the attachment and subsequent the biofilm formation.

Quantification of Staphylococcus aureus adhesion forces on various dental restorative materials using atomic force microscopy

International Nuclear Information System (INIS)

Merghni, Abderrahmen; Kammoun, Dorra; Hentati, Hajer; Janel, Sébastien; Popoff, Michka; Lafont, Frank; Aouni, Mahjoub; Mastouri, Maha

2016-01-01

Highlights: • 4 dental restorative materials were characterized for roughness, angle contact water and surface free energy. • AFM adhesion forces of S. aureus to tested materials were achieved in presence and absence of salivary conditioning film. • S. aureus initial adhesion is dependent on the surface free energy and roughness. - Abstract: In the oral cavity dental restorative biomaterials can act as a reservoir for infection with opportunistic Staphylococcus aureus pathogen, which can lead to the occurrence of secondary caries and treatment failures. Our aim was to evaluate the adhesion forces by S. aureus on four dental restorative biomaterials and to correlate this finding to differences in specific surface characteristics. Additionally, the influence of salivary conditioning films in exerted adhesion forces was investigated. The substrate hydrophobicity was measured by goniometer and the surface free energy was calculated using the equilibrium advancing contact angle values of water, formamide, and diiodomethane on the tested surfaces. The surface roughness was determined using atomic force microscope (AFM). Additionally, cell force spectroscopy was achieved to quantify the forces that drive cell-substrate interactions. S. aureus bacterium exerted a considerable adhesion forces on various dental restorative materials, which decreased in the presence of saliva conditioning film. The influence of the surface roughness and free energy in initial adhesion appears to be more important than the effect of hydrophobicity, either in presence or absence of saliva coating. Hence, control of surface properties of dental restorative biomaterials is of crucial importance in preventing the attachment and subsequent the biofilm formation.

78 FR 29378 - Aquatic Nuisance Species Task Force; Public Teleconference/Webinar

Science.gov (United States)

2013-05-20

... Invasive Species Awareness Week, Michigan and Mississippi ANS Management Plans, and Asian Carp Surveillance....gov . Dated: May 14, 2013. Jeffrey Underwood, Acting Co-Chair, Aquatic Nuisance Species Task Force...

Phase space imaging of a beam of charged particles by frictional forces

International Nuclear Information System (INIS)

Daniel, H.

1977-01-01

In the case of frictional forces, defined by always acting opposite to the particle motion, Liouville's theorem does not apply. The effect of such forces on a beam of charged particles is calculated in closed form. Emphasis is given to the phase space imaging by a moderator. Conditions for an increase in phase space density are discussed. (Auth.)

Reducing forces during drilling brittle hard materials by using ultrasonic and variation of coolant

Science.gov (United States)

Schopf, C.; Rascher, R.

2016-11-01

The process of ultrasonic machining is especially used for brittle hard materials as the additional ultrasonic vibration of the tool at high frequencies and low amplitudes acts like a hammer on the surface. With this technology it is possible to drill holes with lower forces, therefor the machining can be done faster and the worktime is much less than conventionally. A three-axis dynamometer was used to measure the forces, which act between the tool and the sample part. A focus is set on the sharpness of the tool. The results of a test series are based on the Sauer Ultrasonic Grinding Centre. On the same machine it is possible to drill holes in the conventional way. Additional to the ultasonic Input the type an concentration of coolant is important for the Drilling-force. In the test there were three different coolant and three different concentrations tested. The combination of ultrasonic vibration and the right coolant and concentration is the best way to reduce the Forces. Another positive effect is, that lower drilling-forces produce smaller chipping on the edge of the hole. The way to reduce the forces and chipping is the main issue of this paper.

Population genetic evidence for positive and purifying selection acting at the human IFN-γ locus in Africa.

Science.gov (United States)

Campbell, Michael C; Smith, Lunden T; Harvey, Jayla

2018-03-29

Despite its critical role in the defense against microbial infection and tumor development, little is known about the range of nucleotide and haplotype variation at IFN-γ, or the evolutionary forces that have shaped patterns of diversity at this locus. To address this gap in knowledge, we examined sequence data from the IFN-γ gene in 1461 individuals from 15 worldwide populations. Our analyses uncovered novel patterns of variation in distinct African populations, including an excess of high frequency-derived alleles, unusually long haplotype structure surrounding the IFN-γ gene, and a "star-like" genealogy of African-specific haplotypes carrying variants previously associated with infectious disease. We also inferred a deep time to coalescence of variation at IFN-γ (~ 0.8 million years ago) and ancient ages for common polymorphisms predating the evolution of modern humans. Taken together, these results are congruent with a model of positive selection on standing variation in African populations. Furthermore, we inferred that common variants in intron 3 of IFN-γ are the likely targets of selection. In addition, we observed a paucity of non-synonymous substitutions relative to synonymous changes in the exons of IFN-γ in African and non-African populations, suggestive of strong purifying selection. Therefore, we contend that positive and purifying selection have influenced levels of diversity in different regions of IFN-γ, implying that these distinct genic regions are, or have been, functionally important. Overall, this study provides additional insights into the evolutionary events that have contributed to the frequency and distribution of alleles having a role in human health and disease.

Monolithic Microwave Integrated Circuit (MMIC) Phased Array Demonstrated With ACTS

Science.gov (United States)

1996-01-01

Monolithic Microwave Integrated Circuit (MMIC) arrays developed by the NASA Lewis Research Center and the Air Force Rome Laboratory were demonstrated in aeronautical terminals and in mobile or fixed Earth terminals linked with NASA's Advanced Communications Technology Satellite (ACTS). Four K/Ka-band experimental arrays were demonstrated between May 1994 and May 1995. Each array had GaAs MMIC devices at each radiating element for electronic beam steering and distributed power amplification. The 30-GHz transmit array used in uplinks to ACTS was developed by Lewis and Texas Instruments. The three 20-GHz receive arrays used in downlinks from ACTS were developed in cooperation with the Air Force Rome Laboratory, taking advantage of existing Air Force integrated-circuit, active-phased-array development contracts with the Boeing Company and Lockheed Martin Corporation. Four demonstrations, each related to an application of high interest to both commercial and Department of Defense organizations, were conducted. The location, type of link, and the data rate achieved for each of the applications is shown. In one demonstration-- an aeronautical terminal experiment called AERO-X--a duplex voice link between an aeronautical terminal on the Lewis Learjet and ACTS was achieved. Two others demonstrated duplex voice links (and in one case, interactive video links as well) between ACTS and an Army high-mobility, multipurpose wheeled vehicle (HMMWV, or "humvee"). In the fourth demonstration, the array was on a fixed mount and was electronically steered toward ACTS. Lewis served as project manager for all demonstrations and as overall system integrator. Lewis engineers developed the array system including a controller for open-loop tracking of ACTS during flight and HMMWV motion, as well as a laptop data display and recording system used in all demonstrations. The Jet Propulsion Laboratory supported the AERO-X program, providing elements of the ACTS Mobile Terminal. The successful

The Relation Between Market Forces and Employee Motivation : Consequences of the Introduction of Market Forces in the Dutch Childcare Sector

NARCIS (Netherlands)

Plantinga, Mirjam; Plantenga, Janneke; Siegers, Jacques

The Dutch childcare sector has undergone a transition from a welfare sector into a market sector. The final step in this transition process was taken with the introduction of a new Dutch Childcare Act on 1 January 2005. In discussions about the introduction of market forces, the possible effects on

Adaptive force produced by stress-induced regulation of random variation intensity.

Science.gov (United States)

Shimansky, Yury P

2010-08-01

The Darwinian theory of life evolution is capable of explaining the majority of related phenomena. At the same time, the mechanisms of optimizing traits beneficial to a population as a whole but not directly to an individual remain largely unclear. There are also significant problems with explaining the phenomenon of punctuated equilibrium. From another perspective, multiple mechanisms for the regulation of the rate of genetic mutations according to the environmental stress have been discovered, but their precise functional role is not well understood yet. Here a novel mathematical paradigm called a Kinetic-Force Principle (KFP), which can serve as a general basis for biologically plausible optimization methods, is introduced and its rigorous derivation is provided. Based on this principle, it is shown that, if the rate of random changes in a biological system is proportional, even only roughly, to the amount of environmental stress, a virtual force is created, acting in the direction of stress relief. It is demonstrated that KFP can provide important insights into solving the above problems. Evidence is presented in support of a hypothesis that the nature employs KFP for accelerating adaptation in biological systems. A detailed comparison between KFP and the principle of variation and natural selection is presented and their complementarity is revealed. It is concluded that KFP is not a competing alternative, but a powerful addition to the principle of variation and natural selection. It is also shown KFP can be used in multiple ways for adaptation of individual biological organisms.

Charge-Spot Model for Electrostatic Forces in Simulation of Fine Particulates

Science.gov (United States)

Walton, Otis R.; Johnson, Scott M.

2010-01-01

The charge-spot technique for modeling the static electric forces acting between charged fine particles entails treating electric charges on individual particles as small sets of discrete point charges, located near their surfaces. This is in contrast to existing models, which assume a single charge per particle. The charge-spot technique more accurately describes the forces, torques, and moments that act on triboelectrically charged particles, especially image-charge forces acting near conducting surfaces. The discrete element method (DEM) simulation uses a truncation range to limit the number of near-neighbor charge spots via a shifted and truncated potential Coulomb interaction. The model can be readily adapted to account for induced dipoles in uncharged particles (and thus dielectrophoretic forces) by allowing two charge spots of opposite signs to be created in response to an external electric field. To account for virtual overlap during contacts, the model can be set to automatically scale down the effective charge in proportion to the amount of virtual overlap of the charge spots. This can be accomplished by mimicking the behavior of two real overlapping spherical charge clouds, or with other approximate forms. The charge-spot method much more closely resembles real non-uniform surface charge distributions that result from tribocharging than simpler approaches, which just assign a single total charge to a particle. With the charge-spot model, a single particle may have a zero net charge, but still have both positive and negative charge spots, which could produce substantial forces on the particle when it is close to other charges, when it is in an external electric field, or when near a conducting surface. Since the charge-spot model can contain any number of charges per particle, can be used with only one or two charge spots per particle for simulating charging from solar wind bombardment, or with several charge spots for simulating triboelectric charging

1990 No. 1918. The Nuclear Installations Act 1965 (Repeal and Modifications) Regulations 1990

International Nuclear Information System (INIS)

1990-01-01

These Regulations entered into force on 31 October 1990. They repeal part of Section (1) of the Nuclear Installations Act 1965 to remove the exemption of the United Kingdom Atomic Energy Authority (UKAEA) from licensing under the Act. The Regulations also amend the 1965 Act to ensure that the UKAEA's duties in respect of the safety of premises it occupies will continue to apply whether or not a nuclear site licence has been granted. (NEA) [fr

The Key Driving Forces for Geo-Economic Relationships between China and ASEAN Countries

Directory of Open Access Journals (Sweden)

Shufang Wang

2017-12-01

Full Text Available With the rise of China and the implementation of the “21st Century Maritime Silk Road” strategy, research on geo-economics between China and ASEAN (Association of Southeast Asian Nations countries has become increasingly important. Current studies mainly focus on influencing factors, while there is little consideration about how these influencing factors act on geo-economic relationships. Therefore, this paper explores the key driving forces for geo-economic relationships between China and ASEAN countries by use of the structural equation modeling based on Partial Lease Squares. There are three main findings: (1 Economic factors have the greatest impact on geo-economic relationships and the total path effect is 0.778. Geo-location, geopolitics and geo-culture act on geo-economic relationships directly and indirectly. Their total path effects are 0.731, 0.645 and 0.513, respectively. (2 Indirect effects of geo-location, geopolitics and geo-culture impacting geo-economic relationships are far greater than direct effects. Geo-culture, in particular, has a vital mediating effect on geo-economic relationships. (3 Economic drivers promote geo-economic relationships through market, industrial policy, technical, network and benefit-sharing mechanisms. Political drivers improve geo-economic relationships through cooperation, negotiation, coordination and institutional mechanisms. Cultural drivers enhance geo-economic relationships through transmission mechanism. Location drivers facilitate geo-economic relationships through selection mechanism. We provide new insights on the geo-economic relationships through quantitative analysis and enrich the existing literature by revealing the key driving forces and mechanisms for geo-economic relationships.

The Use of Force Notation to Detect Students' Misconceptions: Mutual Interactions Case

Science.gov (United States)

Serhane, Ahcene; Zeghdaoui, Abdelhamid; Debiache, Mehdi

2017-01-01

Using a conventional notation for representing forces on diagrams, students were presented with questions on the interaction between two objects. The results show that complete understanding of Newton's Third Law of Motion is quite rare, and that some problems relate to misunderstanding which force acts on each body. The use of the terms…

Pre-Acting Control for Shock and Impact Isolation Systems

Directory of Open Access Journals (Sweden)

D.V. Balandin

2005-01-01

Full Text Available Pre-acting control in shock/impact isolation systems is studied. With pre-acting control, the isolation system begins to respond to an impact before this impact has been applied to the base. The limiting performance of the isolator with pre-acting control is investigated for a single-degree-of-freedom system subject to an instantaneous impact. The isolation performance index is defined as the maximum of the absolute value of the displacement of the object to be isolated relative to the base, provided that the magnitude of the control force transmitted to the object does not exceed a prescribed value. It is shown that there is a substantial advantage in the use of pre-acting isolators over isolators without pre-action. Particular attention is given to a pre-acting isolator based on a passive elastic element (a spring separating the object to be protected from the base. An example illustrates the calculation of the design parameters of such an isolator.

RPTP-alpha acts as a transducer of mechanical force on alphav/beta3-integrin-cytoskeleton linkages

DEFF Research Database (Denmark)

von Wichert, Gotz; Jiang, Guoying; Kostic, Ana

2003-01-01

Cell motility on ECM critically depends on the cellular response to force from the matrix. We find that force-dependent reinforcement of alphav/beta3-integrin-mediated cell-matrix connections requires the receptor-like tyrosine phosphatase alpha (RPTPalpha). RPTPalpha colocalizes with alphav...... of alphav/beta3-integrin-cytoskeleton connections during the initial phase of ECM contact. These observations indicate that Src family kinases have distinct functions during adhesion site assembly, and that RPTPalpha is an early component in force-dependent signal transduction pathways leading...

Acceptance and Commitment Therapy (ACT) as a Career Counselling Strategy

Science.gov (United States)

Hoare, P. Nancey; McIlveen, Peter; Hamilton, Nadine

2012-01-01

Acceptance and commitment therapy (ACT) has potential to contribute to career counselling. In this paper, the theoretical tenets of ACT and a selection of its counselling techniques are overviewed along with a descriptive case vignette. There is limited empirical research into ACT's application in career counselling. Accordingly, a research agenda…

Experimental study on the control interaction force coefficient; Soju ryutairyoku kansho keisu ni kansuru jikkenteki kenkyu

Energy Technology Data Exchange (ETDEWEB)

Nakatake, K; Oda, K; Yoshitake, A; Fujita, K; Nakajima, A [Kyushu University, Fukuoka (Japan). Faculty of Engineering

1996-04-10

The interaction force induced to hull by steering is important for prediction of control performance of ships. The control interaction force coefficient dependent on the steering has been investigated through the rudder angle tests using three small model ships with a length of 2.5 m, i.e., mathematical type of ship, cargo type of ship, and tanker type of ship. The interaction forces acting on the hull, propeller, and rudder were determined by measuring the lateral force as well as the forward force of the hydrodynamic forces acting on the rudder. These forces were compared with the theoretically calculated values. Prior to the rudder angle tests, the self propulsion factor and the number of revolution of propeller were determined from the results of the open water tests, resistance tests, and self propulsion tests by the changing load method. The rudder angle tests were conducted under this number of revolution of propeller as a standard condition, and under those increasing and decreasing by 15%. Consequently, the interaction forces determined from the rudder angle tests agreed well with those determined from the other tests. When comparing the control hydrodynamic forces determined from the tests with those theoretically calculated, a similar trend was observed. Effectiveness of the theoretical model was confirmed. 4 refs., 14 figs., 3 tabs.

The Art of Selection: Command Selection Failures, and a Better Way to Select Army Senior Leaders

Science.gov (United States)

2013-04-12

and Effects ( MFE ), Force Sustainment (FS), and Operations Support (OS). Board members review board files in accordance with the instructions given to...Fires, and Effects ( MFE ), Operations Support (OS), and Force Sustainment (FS). The exact composition of a command selection board is governed by a...policy updated annually by the Military Personnel Management Directorate. For example, the MFE lieutenant colonel command board will be made up of one

Act of 19 June 1974 on Compensation for Nuclear Damage

International Nuclear Information System (INIS)

1974-01-01

This Act which came into force on 18 September 1974 replaces the nuclear third party liability provisions of the 1962 Act on nuclear installations. Its adoption enabled the Danish Government to ratify the 1960 Paris Convention and the 1963 Brussels Supplementary Convention. In accordance with the principles prescribed by these Conventions, the Act establishes an absolute and limited third party liability system (75 million Danish Krone) and compulsory insurance for the operator of a nuclear installation situated in Denmark. In certain conditions, the State may have to intervene to ensure compensation of nuclear damage exceeding the financial security provided by the operator liable. (NEA) [fr

On the axioms of the forces in the mechanics of rigid bodies

Directory of Open Access Journals (Sweden)

Lámer Géza

2017-01-01

Full Text Available Newton summarised knowledge related to forces in three axioms. The first and second ones define the mechanical state and motion of the examined body when there is no force or when force is exerted on the body. The third defines the law of action and reaction. Newton did not define it as separate axiom but assumed that forces are completely independent from each other. The statics applies four axioms. The first applies to the balance of two forces while the second one applies of three forces. The third axiom defines the relationships inside an equilibrium force system. The fourth one is the axiom of action and reaction. The two axiom systems are independent from each other. Further the independent axioms are applied in case of constraint forces: frictionless reaction force orthogonal on the forced surface, friction force acts in the direction of the motion, the deformation can be elastic, plastic and viscous.

Forces on wheels and fuel consumption in cars

Science.gov (United States)

Güémez, J.; Fiolhais, M.

2013-07-01

Motivated by real classroom discussions, we analyze the forces acting on moving vehicles, specifically friction on their wheels. In typical front-wheel-drive cars when the car accelerates these forces are in the forward direction in the front wheels, but they are in the opposite direction in the rear wheels. The situation may be intriguing for students, but it may also be helpful and stimulating to clarify the role of friction forces on rolling objects. In this paper we also study the thermodynamical aspects of an accelerating car, relating the distance traveled to the amount of fuel consumed. The fuel consumption is explicitly shown to be Galilean invariant and we identify the Gibbs free energy as the relevant quantity that enters into the thermodynamical description of the accelerating car. The more realistic case of the car's motion with the dragging forces taken into account is also discussed.

Forces on wheels and fuel consumption in cars

International Nuclear Information System (INIS)

Güémez, J; Fiolhais, M

2013-01-01

Motivated by real classroom discussions, we analyze the forces acting on moving vehicles, specifically friction on their wheels. In typical front-wheel-drive cars when the car accelerates these forces are in the forward direction in the front wheels, but they are in the opposite direction in the rear wheels. The situation may be intriguing for students, but it may also be helpful and stimulating to clarify the role of friction forces on rolling objects. In this paper we also study the thermodynamical aspects of an accelerating car, relating the distance traveled to the amount of fuel consumed. The fuel consumption is explicitly shown to be Galilean invariant and we identify the Gibbs free energy as the relevant quantity that enters into the thermodynamical description of the accelerating car. The more realistic case of the car's motion with the dragging forces taken into account is also discussed. (paper)

Coriolis force and Sagnac effect

International Nuclear Information System (INIS)

Gogberashvili, Merab

2002-02-01

The optical Sagnac effect is considered, when the fictitious gravitational field simulates the reflections from the mirrors. It is shown that no contradiction exists between the conclusions of the laboratory and rotated observers. Because of the acting of gravity-like Coriolis force the trajectories of co- and anti-rotating photons have different radii in the rotating reference frame, while in the case of the equal radius the effective gravitational potentials for the photons have to be different. (author)

The implications of force reflection for teleoperation in space

International Nuclear Information System (INIS)

Draper, J.V.; Herndon, J.N.; Moore, W.E.

1987-01-01

This paper reviews previous research on teleoperator force feedback and reports results of a testing program which assessed the impact of force reflection on teleoperator task performance. Force reflection is a type of force feedback in which the forces acting on the remote portion of the teleoperator are displayed to the operator by back-driving the master controller. The testing program compared three force reflection levels: 4 to 1 (four units of force on the slave produce one unit of force at the master controller), 1 to 1, and infinity to 1 (no force reflection). Time required to complete tasks, rate of occurrence of errors, the maximum force applied to tasks components, and variability in forces applied to components during completion of representative remote handling tasks were used as dependent variables. Operators exhibited lower error rates, lower peak forces, and more consistent application of forces using force reflection than they did without it. These data support the hypothesis that force reflection provides useful information for teleoperator users. The earlier literature and the results of the experiment are discussed in terms of their implications for space-based teleoperator systems. The discussion describes the impact of force reflection on task completion performance and task strategies, as suggested by the literature. It is important to understand the trade-offs involved in using telerobotic systems with and without force reflection. Force-reflecting systems are typically more expensive (in mass, volume, and price per unit), but they reduce mean time to repair and may be safer to use, compared to systems without force reflection

The study of dynamic force acted on water strider leg departing from water surface

Science.gov (United States)

Sun, Peiyuan; Zhao, Meirong; Jiang, Jile; Zheng, Yelong

2018-01-01

Water-walking insects such as water striders can skate on the water surface easily with the help of the hierarchical structure on legs. Numerous theoretical and experimental studies show that the hierarchical structure would help water strider in quasi-static case such as load-bearing capacity. However, the advantage of the hierarchical structure in the dynamic stage has not been reported yet. In this paper, the function of super hydrophobicity and the hierarchical structure was investigated by measuring the adhesion force of legs departing from the water surface at different lifting speed by a dynamic force sensor. The results show that the adhesion force decreased with the increase of lifting speed from 0.02 m/s to 0.4 m/s, whose mechanic is investigated by Energy analysis. In addition, it can be found that the needle shape setae on water strider leg can help them depart from water surface easily. Thus, it can serve as a starting point to understand how the hierarchical structure on the legs help water-walking insects to jump upward rapidly to avoid preying by other insects.

A new orthodontic force system for moment control utilizing the flexibility of common wires: Evaluation of the effect of contractile force and hook length

Directory of Open Access Journals (Sweden)

Wei-Jen Lai

2018-01-01

Conclusion: The system acted similar to an off-center V-bend and can be applied in clinical practice as an unconventional loop design. We suggest that this force system has the potential for second-order moment control in clinical applications.

Protective force legal issues: the security perspective

International Nuclear Information System (INIS)

Rich, B.L.

1984-01-01

There has been much discussion and some controversy on the legal issues faced by the Department of Energy's (DOE) protective forces in the performance of their security duties. These include the observance of legal proprieties in the arrest of non-violent demonstrators, the use of lethal weapons, and the extent of protective forces' authority to carry weapons and protect DOE's security interests offsite. In brief, the need to protect DOE's security interests may be in nominal conflict with other requirements. When faced with a potential conflict in requirements, we in the DOE security community must place first attention to the security mission -- to deter and prevent hostile acts

A quantum theory of the self-energy of non-relativistic fermions and of the Coulomb-Yukawa force acting between them

International Nuclear Information System (INIS)

Ernst, V.

1978-01-01

The idea of the systematic Weisskopf-Wigner approximation as used sporadically in atomic physics and quantum optics, is extended here to the interaction of a field of non-relativistic fermions with a field of relativistic bosons. It is shown that the usual (non-existing) interaction Hamiltonian of this system can be written as a sum of a countable number of self-adjoint and bounded partial Hamiltonians. The system of these Hamiltonians defines the order hierarchy of the present approximation scheme. To demonstrate its physical utility it is shown that in a certain order it provides satisfactory quantum theory of the 'self-energy' of the fermions under discussion. This is defined as the binding energy of bosons bound to the fermions and building up the latter's 'individual Coulomb or Yukawa fields' in the sense of expectation values of the corresponding field operator. In states of more than one fermion the bound photons act as a mediating agent between the fermions; this mechanism closely resembles the Coulomb or Yukawa 'forces' used in conventional non-relativistic quantum mechanics. (author)

Experimental Validation of Flow Force Models for Fast Switching Valves

DEFF Research Database (Denmark)

Bender, Niels Christian; Pedersen, Henrik Clemmensen; Nørgård, Christian

2017-01-01

This paper comprises a detailed study of the forces acting on a Fast Switching Valve (FSV) plunger. The objective is to investigate to what extend different models are valid to be used for design purposes. These models depend on the geometry of the moving plunger and the properties of the surroun......This paper comprises a detailed study of the forces acting on a Fast Switching Valve (FSV) plunger. The objective is to investigate to what extend different models are valid to be used for design purposes. These models depend on the geometry of the moving plunger and the properties...... to compare and validate different models, where an effort is directed towards capturing the fluid squeeze effect just before material on material contact. The test data is compared with simulation data relying solely on analytic formulations. The general dynamics of the plunger is validated...

Now Those Who Were Scattered Went about Preaching the Word (Acts 8:4: The Migrant Church and Its Mission According to the Book of Acts

Directory of Open Access Journals (Sweden)

Stenschke, Christoph

2016-03-01

Full Text Available After a brief survey of migration in the Bible, this article examines migration be it voluntary or enforced in the Book of Acts. Acts describes in Stephen's speech in surprising detail experiences of migration in Israel's past and its theological implications. Acts also describes that many early Christian missionaries served in places that were not their places of origin, voluntarily or by force: the disciples ended up in Jerusalem and eventually at the ends of the earth rather than returning to Galilee. Others had come to Jerusalem from elsewhere even before encountering the Gospel and ministered throughout the Eastern Mediterranean world as they became involved in mission. Early Christian mission is closely related to migration and dislocation, voluntary or by force, led by the Spirit and for the sake of the Gospel. Repeatedly other missionaries had to flee in order to avoid persecution. Despite the tragedy and suffering involved, there were also great opportunities which were readily seized: the Gospel moved forward. Much of early Christian mission was accomplished by refugees. A final section reflects on the significance of this portrayal of early Christian mission for the church and its mission in the 21st century.

Foreign Intelligence Surveillance Act: Selected Legislation from the 108th Congress

National Research Council Canada - National Science Library

Bazan, Elizabeth B

2005-01-01

The Foreign Intelligence Surveillance Act, 50 U.S.C. 1801 (FISA) as passed in 1978, provided a statutory framework for the use of electronic surveillance in the context of foreign intelligence gathering...

76 FR 63287 - Privacy Act of 1974; System of Records

Science.gov (United States)

2011-10-12

... one command to facilitate collaborative planning and to assist all echelons in achieving situational awareness, and for assisting the Combatant Command and Joint Task Force Surgeon in assessing risks..., Attention: Freedom of Information Act Requester Service Center, 16401 East Centretech Parkway, Aurora, CO...

A novel experimental mechanics method for measuring the light pressure acting on a solar sail membrane

Science.gov (United States)

Shi, Aiming; Jiang, Li; Dowell, Earl H.; Qin, Zhixuan

2017-02-01

Solar sail is a high potential `sailing craft' for interstellar exploration. The area of the first flight solar sail demonstrator named "IKAROS" is 200 square meters. Future interplanetary missions will require solar sails at least on the order of 10000 square meters (or larger). Due to the limitation of ground facilities, the size of experimental sample should not be large. Furthermore the ground experiments have to be conducted in gravitational field, so the gravity effect must be considered in a ground test. To obtain insight into the solar sail membrane dynamics, a key membrane flutter (or limit cycle oscillations) experiment with light forces acting on it must be done. But one big challenge is calibrating such a tiny light force by as a function of the input power. In this paper, a gravity-based measuring method for light pressure acting on membrane is presented. To explain the experimental principle, an ideal example of a laser beam with expanders and a metal film is studied. Based on calculations, this experimental mechanics method for calibrating light pressure with an accuracy of 0.01 micro-Newton may be realized by making the light force balance the gravity force on the metal films. This gravity-based measuring method could not only be applied to study the dynamics characteristics of solar sail membrane structure with different light forces, but could also be used to determine more accurate light forces/loads acting on solar sail films and hence to enhance the determination of the mechanical properties of the solar sail membrane structure.

Lateral Casimir-Polder forces by breaking time-reversal symmetry

Science.gov (United States)

Oude Weernink, Ricardo R. Q. P. T.; Barcellona, Pablo; Buhmann, Stefan Yoshi

2018-03-01

We examine the lateral Casimir-Polder force acting on a circular rotating emitter near a dielectric plane surface. As the circular motion breaks time-reversal symmetry, the spontaneous emission in a direction parallel to the surface is in general anisotropic. We show that a lateral force arises which can be interpreted as a recoil force because of this asymmetric emission. The force is an oscillating function of the distance between the emitter and the surface, and the lossy character of the dielectric strongly influences the results in the near-field regime. The force exhibits also a population-induced dynamics, decaying exponentially with respect to time on time scales of the inverse of the spontaneous decay rate. We propose that this effect could be detected measuring the velocity acquired by the emitter, following different cycles of excitation and spontaneous decay. Our results are expressed in terms of the Green's tensor and can therefore easily be applied to more complex geometries.

Prediction of bubble detachment diameter in flow boiling based on force analysis

International Nuclear Information System (INIS)

Chen Deqi; Pan Liangming; Ren Song

2012-01-01

Highlights: ► All the forces acting on the growing bubbles are taken into account in the model. ► The bubble contact diameter has significant effect on bubble detachment. ► Bubble growth force and surface tension are more significant in narrow channel. ► A good agreement between the predicted and the measured results is achieved. - Abstract: Bubble detachment diameter is one of the key parameters in the study of bubble dynamics and boiling heat transfer, and it is hard to be measured in a boiling system. In order to predict the bubble detachment diameter, a theoretical model is proposed based on forces analysis in this paper. All the forces acting on a bubble are taken into account to establish a model for different flow boiling configurations, including narrow and conventional channels, upward, downward and horizontal flows. A correlation of bubble contact circle diameter is adopted in this study, and it is found that the bubble contact circle diameter has significant effect on bubble detachment. A new correlation taking the bubble contact circle diameter into account for the evaluation of bubble growth force is proposed in this study, and it is found that the bubble growth force and surface tension force are more significant in narrow channel when comparing with that in conventional channel. A visual experiment was carried out in order to verify present model; and the experimental data from published literature are used also. A good agreement between predicted and measured results is achieved.

Forces on particles in microstreaming flows

Science.gov (United States)

Hilgenfeldt, Sascha; Rallabandi, Bhargav; Thameem, Raqeeb

2015-11-01

In various microfluidic applications, vortical steady streaming from ultrasonically driven microbubbles is used in concert with a pressure-driven channel flow to manipulate objects. While a quantitative theory of this boundary-induced streaming is available, little work has been devoted to a fundamental understanding of the forces exerted on microparticles in boundary streaming flows, even though the differential action of such forces is central to applications like size-sensitive sorting. Contrary to other microfluidic sorting devices, the forces in bubble microstreaming act over millisecond times and micron length scales, without the need for accumulated deflections over long distances. Accordingly, we develop a theory of hydrodynamic forces on the fast time scale of bubble oscillation using the lubrication approximation, showing for the first time how particle displacements are rectified near moving boundaries over multiple oscillations in parallel with the generation of the steady streaming flow. The dependence of particle migration on particle size and the flow parameters is compared with experimental data. The theory is applicable to boundary streaming phenomena in general and demonstrates how particles can be sorted very quickly and without compromising device throughput. We acknowledge support by the National Science Foundation under grant number CBET-1236141.

Modeling of Dynamic Fluid Forces in Fast Switching Valves

DEFF Research Database (Denmark)

Roemer, Daniel Beck; Johansen, Per; Pedersen, Henrik Clemmensen

2015-01-01

Switching valves experience opposing fluid forces due to movement of the moving member itself, as the surrounding fluid volume must move to accommodate the movement. This movement-induced fluid force may be divided into three main components; the added mass term, the viscous term and the socalled...... history term. For general valve geometries there are no simple solution to either of these terms. During development and design of such switching valves, it is therefore, common practice to use simple models to describe the opposing fluid forces, neglecting all but the viscous term which is determined...... based on shearing areas and venting channels. For fast acting valves the opposing fluid force may retard the valve performance significantly, if appropriate measures are not taken during the valve design. Unsteady Computational Fluid Dynamics (CFD) simulations are available to simulate the total fluid...

A Fifth Force: Generalized through Superconductors

Science.gov (United States)

Robertson, Glen A.

1999-01-01

The connection between the Biefield-Brown Effect, the recent repeat of the 1902 Trouton-Noble (TN) experiments, and the gravity shielding experiments was explored. This connection is visualized through high capacitive electron concentrations. From this connection, a theory is proposed that connects mass energy to gravity and a fifth force. The theory called the Gravi-Atomic Energy theory presents two new terms: Gravi-atomic energy and quantum vacuum pressure (QVP). Gravi-atomic energy is defined as the radiated mass energy, which acts on vacuum energy to create a QVP about a mass, resulting in gravity and the fifth force. The QVP emission from a superconductor was discussed followed by the description of a test for QVP from a superconductor using a Cavendish balance.

Selection of methods and parameters for forced weakening of roofing in stoping faces

Energy Technology Data Exchange (ETDEWEB)

Bekbulatov, A K

1982-01-01

The use of the method of advanced shooting on mines of different basins of the country indicated the need to generalize results of work for forced weakening of the roofing on mines in the sector in order to create ''Instructions For Selecting the Methods and Parameters of Forced Weakening of Roofing in the Stoping Faces'' with the participation of the basin scientific research institutes under the leadership of the VNIMI. The main method of weakening which has been introduced in the Karaganda basin is frontal shooting with the use of torpedo-charges. Shooting of the roofing in order reduce the intensity of the primary settling of the main roofing is done in parallel and perpendicular plans. With the parallel plan, the wells are drilled out from the adjoining roadways parallel to the stoping face, and with perpendicular plan, from the assembly chamber perpendicular to the stoping face. In order to reduce the intensity of secondary settling of the main roofing, the parallel or parallel-inclined method is used in designing of the torpedo-charge and the torpedo-head. It is reported that the torpedo-charge is a set of individual torpedos made of polyethylene pipes of length 1500 mm connected to each other with the help of couplings and splints. The torpedo-head consists of a polyethylene pipe of length 700 mm with wall thickness 15-17 mm filled with bulk explosives. Within the torpedo there are 2 explosive charges with electric-detonators for instantaneous action. The main cables of the explosive circuit are connected to the electric detonators and are passed through the packing pipe. In the improved design of the torpedo-head and the torpedo-charge, there are no metal parts. This excludes blow-out of particles of incandescent metal during the explosion and increases the level of work safety. The torpedo-charge is installed manually or mechanically with the help of a metal guide (rammer) which is removed from the well after it delivers the torpedo-charge.

The study of dynamic force acted on water strider leg departing from water surface

Directory of Open Access Journals (Sweden)

Peiyuan Sun

2018-01-01

Full Text Available Water-walking insects such as water striders can skate on the water surface easily with the help of the hierarchical structure on legs. Numerous theoretical and experimental studies show that the hierarchical structure would help water strider in quasi-static case such as load-bearing capacity. However, the advantage of the hierarchical structure in the dynamic stage has not been reported yet. In this paper, the function of super hydrophobicity and the hierarchical structure was investigated by measuring the adhesion force of legs departing from the water surface at different lifting speed by a dynamic force sensor. The results show that the adhesion force decreased with the increase of lifting speed from 0.02 m/s to 0.4 m/s, whose mechanic is investigated by Energy analysis. In addition, it can be found that the needle shape setae on water strider leg can help them depart from water surface easily. Thus, it can serve as a starting point to understand how the hierarchical structure on the legs help water-walking insects to jump upward rapidly to avoid preying by other insects.

Color van der Waals force acting in heavy-ion scattering at low energies

International Nuclear Information System (INIS)

Hussein, M.S.; Lima, C.L.; Pato, M.P.; Bertulani, C.A.

1990-01-01

The influence of the color van der Waals force in the elastic scattering of 208 Pb on 208 Pb at sub-barrier energies is studied. The conspicuous changes in the Mott oscillation found here are suggested as a possible experimental test

The resurgence of selective contracting restrictions.

Science.gov (United States)

Marsteller, J A; Bovbjerg, R R; Nichols, L M; Verrilli, D K

1997-10-01

As managed care has spread, so has legislation to force plans to contract with any willing provider (AWP) and give patients freedom of choice (FOC). Managed care organizations' selective networks and provider integration reduce patient access to providers, along with provider access to paying patients, so many providers have lobbied for AWP-FOC laws. In opposition are managed care organizations (MCOs), which want full freedom to contract selectively to control prices and utilization. This article comprehensively describes laws in all fifty-one jurisdictions, classifies their relative strength, and assesses the implications of the laws. Most are relatively weak forms and all are limited in application by ERISA and the federal HMO Act. The article also uses an associative multivariate analysis to relate the selective contracting environments to HMO penetration rates, rural population, physician density, and other variables. States with weak laws also have higher HMO penetration and higher physician density, but smaller rural populations. We conclude that the strongest laws overly restrict the management of care, to the likely detriment of cost control. But where market power is rapidly concentrating, not restricting selective contracting could diminish long-term competition and patient access to care. In the face of uncertainty about the impact of these laws, an intermediate approach may be better than all or nothing. States should consider mandating that plans offer point-of-service options, for a separate premium. This option expands patient choice of plans at the time of enrollment and of providers at the time of care, yet maintains plans' ability to control core providers.

Slovak Republic Act No. 409/2006 Coll. of 24 June 2006 on waste and amending some laws

International Nuclear Information System (INIS)

2006-01-01

This Act into system of law of the Slovak Republic were exrogared the legal acts of the European Communities listed in the Annex 1. This Act regulates the competence of state administration and municipalities, the rights and obligations of legal entities and individuals in preventing waste and in waste management, liability for breach of obligations in the waste management and the establishment of the Recycling Fund. This Act came into force on July 1, 2006.

Air traffic security act unconstitutional; Luftsicherheitsgesetz verfassungswidrig

Energy Technology Data Exchange (ETDEWEB)

Heller, W.

2006-05-15

In the interest of more effective protective measures against terrorist attacks, the German federal parliament inter alia added a clause to the Air Traffic Security Act (Sec. 14, Para. 3, Air Traffic Security Act) empowering the armed forces to shoot down aircraft to be used as a weapon against human lives. In Germany, this defense possibility has been discussed also in connection with deliberate crashes of hijacked aircraft on nuclear power plants. The 1{sup st} Division of the German Federal Constitutional Court, in its decision of February 15, 2006, ruled that Sec. 14, Para. 3, Air Traffic Security Act was incompatible with the Basic Law and thus was null and void (file No. 1 BvR 357/05) for two reasons: - There was no legislative authority on the part of the federal government. - The provision was incompatible with the basic right of life and the guarantee of human dignity as enshrined in the Basic Law. (orig.)

Final disposal of spent nuclear fuel - basis for site selection

International Nuclear Information System (INIS)

Anttila, P.

1995-05-01

International organizations, e.g. IAEA, have published several recommendations and guides for the safe disposal of radioactive waste. There are three major groups of issues affecting the site selection process, i.e. geological, environmental and socioeconomic. The first step of the site selection process is an inventory of potential host rock formations. After that, potential study areas are screened to identify sites for detailed investigations, prior to geological conditions and overall suitability for the safe disposal. This kind of stepwise site selection procedure has been used in Finland and in Sweden. A similar approach has been proposed in Canada, too. In accordance with the amendment to the Nuclear Energy Act, that entered into force in the beginning of 1995, Imatran Voima Oy has to make preparations for the final disposal of spent fuel in the Finnish bedrock. Relating to the possible site selection, the following geological factors, as internationally recommended and used in the Nordic countries, should be taken into account: topography, stability of bedrock, brokenness and fracturing of bedrock, size of bedrock block, rock type, predictability and natural resources. The bedrock of the Loviisa NPP site is a part of the Vyborg rapakivi massif. As a whole the rapakivi granite area forms a potential target area, although other rock types or areas cannot be excluded from possible site selection studies. (25 refs., 7 figs.)

Muscle response to pneumatic hand tool torque reaction forces.

Science.gov (United States)

Radwin, R G; VanBergeijk, E; Armstrong, T J

1989-06-01

Surface electromyography was used for studying the effects of torque reaction force acting against the hand, on forearm muscle activity and grip force for five subjects operating right angle, air shut-off nutrunners. Four tools having increasing spindle torque were operated using short and long torque reaction times. Nutrunner spindle torque ranged between 30 Nm and 100 Nm. Short torque reaction time was considered 0.5 s while long torque reaction time was 2 s. Peak horizontal force was the greatest component of the reaction force acting against the hand and accounted for more than 97% of the peak resultant hand force. Peak hand force increased from 89 N for the smallest tool to 202 N for the largest tool. Forearm muscle rms EMG, scaled for grip force, indicated average flexor activity during the Torque-reaction phase was more than four times greater than the Pre-start and Post Shut-off phases, and two times greater than the Run-down phase. Flexor EMG activity during the Torque-reaction phase increased for increasing tool peak spindle torque. Average flexor rms EMG activity, scaled for grip force, during the Torque-reaction phase increased from 372 N for the 30 Nm nutrunner to 449 N for the 100 Nm nutrunner. Flexor rms EMG activity averaged during the Torque-reaction phase and scaled for grip force was 390 N for long torque reaction times and increased to 440 N for short torque reaction times. Flexor rms EMG integrated over the torque reaction phase was 839 Ns for long torque reaction times and decreased to 312 Ns for short torque reaction times. The average latency between tool spindle torque onset and peak initial flexor rms EMG for long torque reaction times was 294 ms which decreased to 161 ms for short torque reaction times. The average latency between peak tool spindle torque, just prior to tool shut-off, and peak final rms EMG for long torque reaction times was 97 ms for flexors and 188 ms for extensors, which decreased for short torque reaction times to 47

Report of the HDA building Task Force.

Science.gov (United States)

Scheerer, Ernest W

2006-01-01

The Building Task Force, after researching the many options, recommended to the Board of Trustees that, at this time, it is in the best interest of the association and its members to keep the building. In addition to the reasons outlined in the preceding paragraphs, the conclusions drawn by the Task Force can be summarized as follows: 1) This is not the time to make a change as both land and construction costs are high; 2) There is little inventory at this time that would provide a significant improvement over the present building; 3) There is no urgent need to act now; and 4) Cost-effective changes can be made to make the building more valuable to the association.

Nanostructure and force spectroscopy analysis of human peripheral blood CD4+ T cells using atomic force microscopy

International Nuclear Information System (INIS)

Hu Mingqian; Wang Jiongkun; Cai Jiye; Wu Yangzhe; Wang Xiaoping

2008-01-01

To date, nanoscale imaging of the morphological changes and adhesion force of CD4 + T cells during in vitro activation remains largely unreported. In this study, we used atomic force microscopy (AFM) to study the morphological changes and specific binding forces in resting and activated human peripheral blood CD4 + T cells. The AFM images revealed that the volume of activated CD4 + T cells increased and the ultrastructure of these cells also became complex. Using a functionalized AFM tip, the strength of the specific binding force of the CD4 antigen-antibody interaction was found to be approximately three times that of the unspecific force. The adhesion forces were not randomly distributed over the surface of a single activated CD4 + T cell, indicated that the CD4 molecules concentrated into nanodomains. The magnitude of the adhesion force of the CD4 antigen-antibody interaction did not change markedly with the activation time. Multiple bonds involved in the CD4 antigen-antibody interaction were measured at different activation times. These results suggest that the adhesion force involved in the CD4 antigen-antibody interaction is highly selective and of high affinity

Nanostructure and force spectroscopy analysis of human peripheral blood CD4+ T cells using atomic force microscopy.

Science.gov (United States)

Hu, Mingqian; Wang, Jiongkun; Cai, Jiye; Wu, Yangzhe; Wang, Xiaoping

2008-09-12

To date, nanoscale imaging of the morphological changes and adhesion force of CD4(+) T cells during in vitro activation remains largely unreported. In this study, we used atomic force microscopy (AFM) to study the morphological changes and specific binding forces in resting and activated human peripheral blood CD4(+) T cells. The AFM images revealed that the volume of activated CD4(+) T cells increased and the ultrastructure of these cells also became complex. Using a functionalized AFM tip, the strength of the specific binding force of the CD4 antigen-antibody interaction was found to be approximately three times that of the unspecific force. The adhesion forces were not randomly distributed over the surface of a single activated CD4(+) T cell, indicated that the CD4 molecules concentrated into nanodomains. The magnitude of the adhesion force of the CD4 antigen-antibody interaction did not change markedly with the activation time. Multiple bonds involved in the CD4 antigen-antibody interaction were measured at different activation times. These results suggest that the adhesion force involved in the CD4 antigen-antibody interaction is highly selective and of high affinity.

Models of microbiome evolution incorporating host and microbial selection.

Science.gov (United States)

Zeng, Qinglong; Wu, Steven; Sukumaran, Jeet; Rodrigo, Allen

2017-09-25

Numerous empirical studies suggest that hosts and microbes exert reciprocal selective effects on their ecological partners. Nonetheless, we still lack an explicit framework to model the dynamics of both hosts and microbes under selection. In a previous study, we developed an agent-based forward-time computational framework to simulate the neutral evolution of host-associated microbial communities in a constant-sized, unstructured population of hosts. These neutral models allowed offspring to sample microbes randomly from parents and/or from the environment. Additionally, the environmental pool of available microbes was constituted by fixed and persistent microbial OTUs and by contributions from host individuals in the preceding generation. In this paper, we extend our neutral models to allow selection to operate on both hosts and microbes. We do this by constructing a phenome for each microbial OTU consisting of a sample of traits that influence host and microbial fitnesses independently. Microbial traits can influence the fitness of hosts ("host selection") and the fitness of microbes ("trait-mediated microbial selection"). Additionally, the fitness effects of traits on microbes can be modified by their hosts ("host-mediated microbial selection"). We simulate the effects of these three types of selection, individually or in combination, on microbiome diversities and the fitnesses of hosts and microbes over several thousand generations of hosts. We show that microbiome diversity is strongly influenced by selection acting on microbes. Selection acting on hosts only influences microbiome diversity when there is near-complete direct or indirect parental contribution to the microbiomes of offspring. Unsurprisingly, microbial fitness increases under microbial selection. Interestingly, when host selection operates, host fitness only increases under two conditions: (1) when there is a strong parental contribution to microbial communities or (2) in the absence of a strong

Measurements of dispersion forces between colloidal latex particles with the atomic force microscope and comparison with Lifshitz theory

Energy Technology Data Exchange (ETDEWEB)

Elzbieciak-Wodka, Magdalena; Ruiz-Cabello, F. Javier Montes; Trefalt, Gregor; Maroni, Plinio; Borkovec, Michal, E-mail: michal.borkovec@unige.ch [Department of Inorganic and Analytical Chemistry, University of Geneva, Sciences II, 30, Quai Ernest-Ansermet, 1205 Geneva (Switzerland); Popescu, Mihail N. [Ian Wark Research Institute, University of South Australia, Mawson Lakes, SA 5095 (Australia)

2014-03-14

Interaction forces between carboxylate colloidal latex particles of about 2 μm in diameter immersed in aqueous solutions of monovalent salts were measured with the colloidal probe technique, which is based on the atomic force microscope. We have systematically varied the ionic strength, the type of salt, and also the surface charge densities of the particles through changes in the solution pH. Based on these measurements, we have accurately measured the dispersion forces acting between the particles and estimated the apparent Hamaker constant to be (2.0 ± 0.5) × 10{sup −21} J at a separation distance of about 10 nm. This value is basically independent of the salt concentration and the type of salt. Good agreement with Lifshitz theory is found when roughness effects are taken into account. The combination of retardation and roughness effects reduces the value of the apparent Hamaker constant and its ionic strength dependence with respect to the case of ideally smooth surfaces.

IDEAL BRAKE FORCE DISTRIBUTION BETWEEN THE AXLES OF THE TWO-AXLE VEHICLE SERVICE BRAKE APPLICATIONS

Directory of Open Access Journals (Sweden)

M. Podryhalo

2015-07-01

Full Text Available The obtained analytical expressions allow us to evaluate the stability of two-axle vehicles at various slowdowns. An analytical expression for calculating the ideal according to condition stability ensuring of a two-axle vehicle at service brake applications of brake force distribution allows to offer automatic control devices for brake force adjucement. With decellerationg growth of the two-axle vehicle at service braking the braking force acting on the front axle should decrease relative to the brake force on the rear axle.

FDTD simulations of forces on particles during holographic assembly.

Science.gov (United States)

Benito, David C; Simpson, Stephen H; Hanna, Simon

2008-03-03

We present finite-difference time-domain (FDTD) calculations of the forces and torques on dielectric particles of various shapes, held in one or many Gaussian optical traps, as part of a study of the physical limitations involved in the construction of micro- and nanostructures using a dynamic holographic assembler (DHA). We employ a full 3-dimensional FDTD implementation, which includes a complete treatment of optical anisotropy. The Gaussian beams are sourced using a multipole expansion of a fifth order Davis beam. Force and torques are calculated for pairs of silica spheres in adjacent traps, for silica cylinders trapped by multiple beams and for oblate silica spheroids and calcite spheres in both linearly and circularly polarized beams. Comparisons are drawn between the magnitudes of the optical forces and the Van der Waals forces acting on the systems. The paper also considers the limitations of the FDTD approach when applied to optical trapping.

VizieR Online Data Catalog: 44 SZ-selected galaxy clusters ACT observations (Sifon+, 2016)

Science.gov (United States)

Sifon, C.; Battaglia, N.; Hasselfield, M.; Menanteau, F.; Barrientos, L. F.; Bond, J. R.; Crichton, D.; Devlin, M. J.; Dunner, R.; Hilton, M.; Hincks, A. D.; Hlozek, R.; Huffenberger, K. M.; Hughes, J. P.; Infante, L.; Kosowsky, A.; Marsden, D.; Marriage, T. A.; Moodley, K.; Niemack, M. D.; Page, L. A.; Spergel, D. N.; Staggs, S. T.; Trac, H.; Wollack, E. J.

2017-11-01

ACT is a 6-metre off-axis Gregorian telescope located at an altitude of 5200um in the Atacama desert in Chile, designed to observe the CMB at arcminute resolution. Galaxy clusters were detected in the 148GHz band by matched-filtering the maps with the pressure profile suggested by Arnaud et al. (2010A&A...517A..92A), fit to X-ray selected local (zGMOS) on the Gemini-South telescope, split in semesters 2011B (ObsID:GS-2011B-C-1, PI:Barrientos/Menanteau) and 2012A (ObsID:GS-2012A-C-1, PI:Menanteau), prioritizing clusters in the cosmological sample at 0.3

Self-force as probe of internal structure

International Nuclear Information System (INIS)

Isoyama, Soichiro; Poisson, Eric

2012-01-01

The self-force acting on a (scalar or electric) charge held in place outside a massive body contains information about the body's composition, and can therefore be used as a probe of internal structure. We explore this theme by computing the (scalar or electromagnetic) self-force when the body is a spherical ball of perfect fluid in hydrostatic equilibrium, under the assumption that its rest-mass density and pressure are related by a polytropic equation of state. The body is strongly self-gravitating, and all computations are performed in exact general relativity. The dependence on internal structure is best revealed by expanding the self-force in powers of r -1 0 , with r 0 denoting the radial position of the charge outside the body. To the leading order, the self-force scales as r -3 0 and depends only on the square of the charge and the body's mass; the leading self-force is universal. The dependence on internal structure is seen at the next order, r -5 0 , through a structure factor that depends on the equation of state. We compute this structure factor for relativistic polytropes, and show that for a fixed mass, it increases linearly with the body's radius in the case of the scalar self-force, and quadratically with the body's radius in the case of the electromagnetic self-force. In both cases we find that for a fixed mass and radius, the self-force is smaller if the body is more centrally dense, and larger if the mass density is more uniformly distributed. (paper)

Actuator forces in CFD: RANS and LES modeling in OpenFOAM

International Nuclear Information System (INIS)

Schito, P; Zasso, A

2014-01-01

Wind turbine wakes are a very challenging topic for scientific computations, but modern CFD frameworks and latest HPC centers allow setting up numerical computations on the wake induced by the wind turbine. The main issues is that the correct modeling of the wake is related to the correct modeling of the interaction between the blade and the incoming flow. The aim of the proposed work is to estimate the aerodynamic forces acting on the blades in order to correctly generate the rotor wake applying equivalent aerodynamic force source on the flow. The definition of a blade forces is done developing a model able to correctly estimate this aerodynamic forces as a function of the local flow seen by the blade during its revolution

76 FR 18737 - Reserve Forces Policy Board (RFPB) Member Solicitation

Science.gov (United States)

2011-04-05

..., abolished the Civilian Components Policy Board in June, 1951 and created the Reserve Forces Policy Board... military education, joint qualification, and joint operations matters. The Federal Advisory Committee Act... and 102-3) provide the basis for and guidance concerning the management and operation of Federal...

How small bugs tie down big rocks: Measuring and modeling the forces acting between nets spun by Caddisfly larvae (Hydropsychidae) and gravel particles at the onset of motion

Science.gov (United States)

Mclaughlin, M. K.; Tumolo, B.; Sklar, L. S.; Albertson, L.; Daniels, M.

2017-12-01

The influence of life on geomorphic processes is commonly inferred from correlations between the size and abundance of individual organisms and the change in process thresholds and rates from abiotic conditions. However, to understand and model the underlying mechanisms, it is helpful to make direct measurements of the forces acting between organisms and the earth materials they inhabit. For example, flume studies have found that the presence of net-spinning caddisfly larvae (Trichoptera: Hydropsychidae) can increase the shear stress required to initiate particle motion by more than a factor of two, with potentially significant implications for the timing and magnitude of bedload sediment transport in gravel-bedded rivers. To explore the underlying mechanics we conducted flume experiments at the Stroud Water Research center in Avonadale, Pennsylvania, using strain gages to measure the forces acting between caddisfly nets and sediment particles of various sizes, during the process of initial particle motion. We combine these measurements with high-speed video images to document for the first time, the three dimensional dynamics of net stretching, tearing, and detachment that govern the magnitude of the increase in critical shear stress. We are using these data and insights to substantially improve a previously published theoretical model for the mechanics of sediment stabilization by caddisfly larvae. In particular, we seek to constrain the range of particle sizes potentially stabilized by caddisfly larvae and explain mechanistically why the effect of caddisfly nets varies with particle size. These predictions have implications for understanding feedbacks between bed stabilization by caddisflies, insect density, inter-specific niche partitioning, and the movement of sediment that shapes gravel-bed channels.

Issues related to choosing a guard force structure

International Nuclear Information System (INIS)

Auerback, C.; Cusack, J.; Green, L.; Higinbotham, W.; Indusi, J.; Marcuse, W.; Weinstock, E.

1975-01-01

The establishment of a federal security force has been suggested as an additional step to protect nuclear material. The force would be given the responsibility for guarding nuclear facilities and shipments of nuclear materials. This paper summarizes a study to identify the issues that are relevant to choosing between the private guard forces that are presently employed by industry or a guard force under federal authority. To examine the issues which would be relevant, three possible types of security force structures were selected for comparison: a federal force under central authority, a private guard force employed by or under contract to a facility, and a private arrangement to employ local police officers similar to the arrangement for armed guards at airports. The issues were divided into seven categories: (1) Legal Considerations, (2) Liability, (3) Staffing and Operations, (4) Costs, (5) Relationship to Off-site Forces, (6) Management and Control, (7) Transportation

Biomechanical forces promote embryonic haematopoiesis

Science.gov (United States)

Adamo, Luigi; Naveiras, Olaia; Wenzel, Pamela L.; McKinney-Freeman, Shannon; Mack, Peter J.; Gracia-Sancho, Jorge; Suchy-Dicey, Astrid; Yoshimoto, Momoko; Lensch, M. William; Yoder, Mervin C.; García-Cardeña, Guillermo; Daley, George Q.

2009-01-01

Biomechanical forces are emerging as critical regulators of embryogenesis, particularly in the developing cardiovascular system1,2. After initiation of the heartbeat in vertebrates, cells lining the ventral aspect of the dorsal aorta, the placental vessels, and the umbilical and vitelline arteries initiate expression of the transcription factor Runx1 (refs 3–5), a master regulator of haematopoiesis, and give rise to haematopoietic cells4. It remains unknown whether the biomechanical forces imposed on the vascular wall at this developmental stage act as a determinant of haematopoietic potential6. Here, using mouse embryonic stem cells differentiated in vitro, we show that fluid shear stress increases the expression of Runx1 in CD41+c-Kit+ haematopoietic progenitor cells7,concomitantly augmenting their haematopoietic colony-forming potential. Moreover, we find that shear stress increases haematopoietic colony-forming potential and expression of haematopoietic markers in the paraaortic splanchnopleura/aorta–gonads–mesonephros of mouse embryos and that abrogation of nitric oxide, a mediator of shear-stress-induced signalling8, compromises haematopoietic potential in vitro and in vivo. Collectively, these data reveal a critical role for biomechanical forces in haematopoietic development. PMID:19440194

75 FR 77849 - Privacy Act of 1974; System of Records

Science.gov (United States)

2010-12-14

... Agency, Defense Threat Reduction Agency, Missile Defense Organization, Pentagon Force Protection Agency... DEPARTMENT OF DEFENSE Office of the Secretary [Docket ID: DOD-2010-OS-0160] Privacy Act of 1974; System of Records AGENCY: Office of the Secretary of Defense, DoD. ACTION: Notice to add a system of...

77 FR 77049 - Privacy Act of 1974; System of Records

Science.gov (United States)

2012-12-31

..., Air Force Privacy Act Office, Office of Warfighting Integration and Chief Information officer, ATTN... of 1974 (5 U.S.C. 552a), as amended, which requires the submission of a new or altered system report...). Reason The Innovative Development through Employee Awareness (IDEA) Program Data System (IPDS) has been...

Study on estimating fluid force acting on a hull during maneuvering movement; Soju undoji no sentai ni sayosuru ryutairyoku no suitei ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Yukawa, K; Kijima, K [Kyushu University, Fukuoka (Japan). Faculty of Engineering

1997-10-01

With types of general cargo vessel and VLCC vessel as the object of discussion, a method was discussed to estimate fluid force acting theoretically on a hull during maneuvering movement, taking frame line shape into consideration. A vortex model was improved by giving consideration of time-based decay on intensity of discrete vortex lines based on the Rankine vortex. Modeling of flow fields around a hull was attempted to deal with movements in which width and draft are small as compared with the ship length, and turning angle speed and deviation angle are small. It was assumed that the ship speed is slow and effects of waves can be disregarded. Specular images of the hull were taken with regard to free surface, and handled as a double body model. Speed potential to express flow fields around a hull is required to satisfy the following five boundary conditions of Laplace, substance surface, free vortex layers, infinity and exfoliation. The potential may be handled as a two-dimensional problem in a field near the hull by using assumption of a slender and long body and conformal mapping. It was found possible to estimate hull fluid force with relatively good accuracy. Fine linear coefficients derived from the estimation were used to have performed highly accurate determination on course stabilization. 5 refs., 6 figs., 2 tabs.

Forces on a magnet moving past figure-eight coils

International Nuclear Information System (INIS)

Mulcahy, T.H.; He, Jianliang; Rote, D.M.; Rossing, T.D.

1993-01-01

For the first time, the lift, drag, and guidance forces acting on a permanent magnet are measured as the magnet passes over different arrays of figure-eight (null-flux) coils. The experimental results are in good agreement with the predictions of dynamic circuit theory, which is used to explain more optimal coil arrays

Self-force calculations with matched expansions and quasinormal mode sums

International Nuclear Information System (INIS)

Casals, Marc; Dolan, Sam; Ottewill, Adrian C.; Wardell, Barry

2009-01-01

Accurate modeling of gravitational wave emission by extreme-mass ratio inspirals is essential for their detection by the LISA mission. A leading perturbative approach involves the calculation of the self-force acting upon the smaller orbital body. In this work, we present the first application of the Poisson-Wiseman-Anderson method of 'matched expansions' to compute the self-force acting on a point particle moving in a curved spacetime. The method employs two expansions for the Green function, which are, respectively, valid in the 'quasilocal' and 'distant past' regimes, and which may be matched together within the normal neighborhood. We perform our calculation in a static region of the spherically symmetric Nariai spacetime (dS 2 xS 2 ), in which scalar-field perturbations are governed by a radial equation with a Poeschl-Teller potential (frequently used as an approximation to the Schwarzschild radial potential) whose solutions are known in closed form. The key new ingredients in our study are (i) very high order quasilocal expansions and (ii) expansion of the distant past Green function in quasinormal modes. In combination, these tools enable a detailed study of the properties of the scalar-field Green function. We demonstrate that the Green function is singular whenever x and x ' are connected by a null geodesic, and apply asymptotic methods to determine the structure of the Green function near the null wave front. We show that the singular part of the Green function undergoes a transition each time the null wave front passes through a caustic point, following a repeating fourfold sequence δ(σ), 1/πσ, -δ(σ), -1/πσ, etc., where σ is Synge's world function. The matched-expansion method provides insight into the nonlocal properties of the self-force. We show that the self-force generated by the segment of the worldline lying outside the normal neighborhood is not negligible. We apply the matched-expansion method to compute the scalar self-force acting on

Wavenumber locking and pattern formation in spatially forced systems

International Nuclear Information System (INIS)

Manor, Rotem; Meron, Ehud; Hagberg, Aric

2009-01-01

We study wavenumber locking and pattern formation resulting from weak spatially periodic one-dimensional forcing of two-dimensional systems. We consider systems that produce stationary or traveling stripe patterns when unforced and apply forcing aligned with the stripes. Forcing at close to twice the pattern wavenumber selects, stabilizes, or creates resonant stripes locked at half the forcing wavenumber. If the mismatch between the forcing and pattern wavenumber is high we find that the pattern still locks but develops a wave vector component perpendicular to the forcing direction and forms rectangular and oblique patterns. When the unforced system supports traveling waves, resonant rectangular patterns remain stationary but oblique patterns travel in a direction orthogonal to the traveling waves.

The procedure for granting concessions under the Concessions Act of Republika Srpska

Directory of Open Access Journals (Sweden)

Borojević Klaudia

2015-01-01

Full Text Available The Concessions Act of Republic of Srpska entered into force in 2002. By the adoption of this Act, consessions were exteacted from the Foreign Investments Act and given significantly more attention than in the former period. As legal practice imposed the need for frequent changes of this Act, the new Concessions Act of Republica Srpska was enacted on 15th July 2013. The current legal provisions on concessions in B&H have been modelled on the recognized international standards but they still do not provide sufficient guarantees to foreign investors willing to invest their capital in infrastructure projects in Bosnia and Hercegovina. The types of concessions are clearly defined but there are many other reasons influencing the investment of foreign capital and conclusion of a concession contract, the most prominent of which are the political climate and economic stability.

Calibration Variable Selection and Natural Zero Determination for Semispan and Canard Balances

Science.gov (United States)

Ulbrich, Norbert M.

2013-01-01

Independent calibration variables for the characterization of semispan and canard wind tunnel balances are discussed. It is shown that the variable selection for a semispan balance is determined by the location of the resultant normal and axial forces that act on the balance. These two forces are the first and second calibration variable. The pitching moment becomes the third calibration variable after the normal and axial forces are shifted to the pitch axis of the balance. Two geometric distances, i.e., the rolling and yawing moment arms, are the fourth and fifth calibration variable. They are traditionally substituted by corresponding moments to simplify the use of calibration data during a wind tunnel test. A canard balance is related to a semispan balance. It also only measures loads on one half of a lifting surface. However, the axial force and yawing moment are of no interest to users of a canard balance. Therefore, its calibration variable set is reduced to the normal force, pitching moment, and rolling moment. The combined load diagrams of the rolling and yawing moment for a semispan balance are discussed. They may be used to illustrate connections between the wind tunnel model geometry, the test section size, and the calibration load schedule. Then, methods are reviewed that may be used to obtain the natural zeros of a semispan or canard balance. In addition, characteristics of three semispan balance calibration rigs are discussed. Finally, basic requirements for a full characterization of a semispan balance are reviewed.

Issues related to choosing a guard force structure

International Nuclear Information System (INIS)

Averbach, C.; Cusack, J.; Green, L.; Higinbotham, W.; Indusi, J.; Marcuse, W.; Weinstock, E.

1975-01-01

The establishment of a federal security force has been suggested as an additional step to protect nuclear material. The force would be given the responsibility for guarding nuclear facilities and shipments of nuclear materials. A study to identify the issues that are relevant to choosing between the private guard forces that are presently employed by industry or a guard force under federal authority is summarized. To examine the issues which would be relevant, three possible types of security force structures were selected for comparison: a federal force under central authority, a private guard force employed by or under contract to a facility, and a private arrangement to employ local police officers similar to the arrangement for armed guards at airports. The issues were divided into seven categories: (1) legal considerations, (2) liability, (3) staffing and operations, (4) costs, (5) relationship to off-site forces, (6) management and control, and (7) transportation. (U.S.)

Evaluation of Antioxidant or Prooxidant Properties of Selected Amino Acids Using In Vitro Assays and in Oil-in-Water Emulsions Under Riboflavin Sensitization.

Science.gov (United States)

Ka, HyeJung; Yi, BoRa; Kim, Mi-Ja; Lee, JaeHwan

2016-05-01

The antioxidant properties of selected amino acids were tested using in vitro assays and oil-in-water (O/W) emulsions under riboflavin (RF) photosensitization. Headspace oxygen content, lipid hydroperoxides, and conjugated dienes were determined for the degree of oxidation. Riboflavin photosensitization was adapted as the oxidation driving force. In vitro assays showed that cysteine had the highest antioxidant properties followed by tryptophan and tyrosine. However, in O/W emulsions under RF photosensitization, tyrosine inhibited lipid oxidation whereas tryptophan acted as a prooxidant. Tryptophan accelerated the rates of oxidation in O/W emulsion without RF. The antioxidant properties of amino acids differed depending on the antioxidant determination methods, oxidation driving forces, and food matrices. © 2016 Institute of Food Technologists®

Defect forces, defect couples and path integrals in fracture mechanics

International Nuclear Information System (INIS)

Roche, R.L.

1979-07-01

In this work, it is shown that the path integrals can be introduced without any reference to the material behavior. The method is based on the definition in a continuous medium of a set of vectors and couples having the dimension of a force or a moment. More precisely, definitions are given of volume defect forces, surface defect forces, volume defect couples, and surface defect couples. This is done with the help of the stress working variation of a particule moving through the solid. The most important result is: the resultant of all the defect forces included in a volume V is the J integral on the surface surrounding V and the moment resultant is the L integral. So these integrals are defined without any assumption on the material constitutive equation. Another result is the material form of the virtual work principle - defect forces are acting like conventional forces in the conventional principles of virtual work. This lead to the introduction of the energy momentum tensor and of the associated couple stress. Application of this method is made to fracture mechanics in studying the defect forces distribution around a crack [fr

Gravitomagnetic field of the universe and Coriolis force on the rotating Earth

International Nuclear Information System (INIS)

Veto, B

2011-01-01

The Machian effect of distant masses of the universe in the frame of reference of the rotating Earth is demonstrated using the gravitomagnetic approach of general relativity. This effect appears in the form of a gravitomagnetic Lorentz force acting on moving bodies on the Earth. The gravitomagnetic field of the universe-deduced from a simple model-exerts a gravitomagnetic Lorentz force on moving bodies, a force parallel to and with comparable strength to the Coriolis force observed on the rotating Earth. It seems after simple considerations that the Coriolis force happens to be the gravitomagnetic Lorentz force exerted by the mass of a black hole universe. The description of the phenomenon is simpler using the gravitomagnetic approach than the standard formulation of general relativity, so the method relying on gravitomagnetism is advisable in lectures intended for master's degree level physics students and advanced undergraduates.

Use of force feedback to enhance graphical user interfaces

Science.gov (United States)

Rosenberg, Louis B.; Brave, Scott

1996-04-01

This project focuses on the use of force feedback sensations to enhance user interaction with standard graphical user interface paradigms. While typical joystick and mouse devices are input-only, force feedback controllers allow physical sensations to be reflected to a user. Tasks that require users to position a cursor on a given target can be enhanced by applying physical forces to the user that aid in targeting. For example, an attractive force field implemented at the location of a graphical icon can greatly facilitate target acquisition and selection of the icon. It has been shown that force feedback can enhance a users ability to perform basic functions within graphical user interfaces.

Bio-inspired ciliary force sensor for robotic platforms

KAUST Repository

Ribeiro, Pedro; Khan, Mohammed Asadullah; Alfadhel, Ahmed; Kosel, Jü rgen; Franco, Fernando; Cardoso, Susana; Bernardino, Alexandre; Schmitz, Alexander; Santos-Victor, Jose; Jamone, Lorenzo

2017-01-01

The detection of small forces is of great interest in any robotic application that involves interaction with the environment (e.g., objects manipulation, physical human-robot interaction, minimally invasive surgery), since it allows the robot to detect the contacts early on and to act accordingly. In this letter, we present a sensor design inspired by the ciliary structure frequently found in nature, consisting of an array of permanently magnetized cylinders (cilia) patterned over a giant magnetoresistance sensor (GMR). When these cylinders are deformed in shape due to applied forces, the stray magnetic field variation will change the GMR sensor resistivity, thus enabling the electrical measurement of the applied force. In this letter, we present two 3 mm × 3 mm prototypes composed of an array of five cilia with 1 mm of height and 120 and 200 μm of diameter for each prototype. A minimum force of 333 μN was measured. A simulation model for determining the magnetized cylinders average stray magnetic field is also presented.

Bio-inspired ciliary force sensor for robotic platforms

KAUST Repository

Ribeiro, Pedro

2017-01-20

The detection of small forces is of great interest in any robotic application that involves interaction with the environment (e.g., objects manipulation, physical human-robot interaction, minimally invasive surgery), since it allows the robot to detect the contacts early on and to act accordingly. In this letter, we present a sensor design inspired by the ciliary structure frequently found in nature, consisting of an array of permanently magnetized cylinders (cilia) patterned over a giant magnetoresistance sensor (GMR). When these cylinders are deformed in shape due to applied forces, the stray magnetic field variation will change the GMR sensor resistivity, thus enabling the electrical measurement of the applied force. In this letter, we present two 3 mm × 3 mm prototypes composed of an array of five cilia with 1 mm of height and 120 and 200 μm of diameter for each prototype. A minimum force of 333 μN was measured. A simulation model for determining the magnetized cylinders average stray magnetic field is also presented.

Radiation Protection Act promulgated on May 19, 1988, SFS 1988: 220

International Nuclear Information System (INIS)

1988-01-01

This Act entered into force on 1 July 1988 and supersedes the previous Radiation Protection Act (SFS 1958: 110). The objective of the new Act is to protect humans, animals and the environment from the harmful effects of ionizing as well as non-ionizing radiation. As previously, the main responsibility for public radiation protection will rest with one central radiation protection authority. The general obligations with regard to radiation protection place a greater responsibility than in the past on persons carrying out activities involving radiation. The Act also contains rules governing decommissioning of technical equipment which could generate radiation. Basically, the same requirements still apply regarding licensing of activities involving ionizing radiation, with certain extensions covering, inter alia, also production and transportation of radioactive material. Under the Act, it is now possible to adjust the licensing and supervisory procedures to the level of danger of the radiation source and the need for adequate competence, etc., and finally, more effective supervision is provided for. (NEA) [fr

Automatic HTS force measurement instrument

International Nuclear Information System (INIS)

Sanders, S.T.; Niemann, R.C.

1999-01-01

A device is disclosed for measuring the levitation force of a high temperature superconductor sample with respect to a reference magnet includes a receptacle for holding several high temperature superconductor samples each cooled to superconducting temperature. A rotatable carousel successively locates a selected one of the high temperature superconductor samples in registry with the reference magnet. Mechanism varies the distance between one of the high temperature superconductor samples and the reference magnet, and a sensor measures levitation force of the sample as a function of the distance between the reference magnet and the sample. A method is also disclosed. 3 figs

Self-Evident Truths: Why We Can Stop Worrying and Love the Posse Comitatus Act

National Research Council Canada - National Science Library

Gentry, Chris R

2008-01-01

This paper asserts that U.S. Government policy prohibiting active participation of the Armed Forces in civilian law enforcement operations, codified in the Posse Comitatus Act of 1878, should remain intact...

77 FR 76861 - Removal of Job Training Partnership Act Implementing Regulations

Science.gov (United States)

2012-12-31

..., 633, 634, 636, 637, and 638 RIN 1205-AB68 Removal of Job Training Partnership Act Implementing...=FR . SUPPLEMENTARY INFORMATION: I. Direct Final Rule Procedure Since removal of the Job Training... barriers to employment for participation in the labor force by providing job training and other services...

Long- and short-term selective forces on malaria parasite genomes

KAUST Repository

Nygaard, Sanne

2010-09-09

Plasmodium parasites, the causal agents of malaria, result in more than 1 million deaths annually. Plasmodium are unicellular eukaryotes with small ~23 Mb genomes encoding ~5200 protein-coding genes. The protein-coding genes comprise about half of these genomes. Although evolutionary processes have a significant impact on malaria control, the selective pressures within Plasmodium genomes are poorly understood, particularly in the non-protein-coding portion of the genome. We use evolutionary methods to describe selective processes in both the coding and non-coding regions of these genomes. Based on genome alignments of seven Plasmodium species, we show that protein-coding, intergenic and intronic regions are all subject to purifying selection and we identify 670 conserved non-genic elements. We then use genome-wide polymorphism data from P. falciparum to describe short-term selective processes in this species and identify some candidate genes for balancing (diversifying) selection. Our analyses suggest that there are many functional elements in the non-genic regions of these genomes and that adaptive evolution has occurred more frequently in the protein-coding regions of the genome. © 2010 Nygaard et al.

Mechanical forces as information: an integrated approach to plant and animal development

Directory of Open Access Journals (Sweden)

Valeria eHernández-Hernández

2014-06-01

Full Text Available Mechanical forces such as tension and compression act throughout growth and development of multicellular organisms. These forces not only affect the size and shape of the cells and tissues but are capable of modifying the expression of genes and the localization of molecular components within the cell, in the plasma membrane, and in the plant cell wall. The magnitude and direction of these physical forces change with cellular and tissue properties such as elasticity. Thus, mechanical forces and the mesoscopic fields that emerge from their local action constitute important sources of positional information. Moreover, physical and biochemical processes interact in non-linear ways during tissue and organ growth in plants and animals. In this review we discuss how such mechanical forces are generated, transmitted, and sensed in these two lineages of multicellular organisms to yield long-range positional information. In order to do so we first outline a potentially common basis for studying patterning and mechanosensing that relies on the structural principle of tensegrity, and discuss how tensegral structures might arise in plants and animals. We then provide some examples of morphogenesis in which mechanical forces appear to act as positional information during development, offering a possible explanation for ubiquitous processes, such as the formation of periodic structures. Such examples, we argue, can be interpreted in terms of tensegral phenomena. Finally, we discuss the hypothesis of mechanically isotropic points as a potentially generic mechanism for the localization and maintenance of stem-cell niches in multicellular organisms. This comparative approach aims to help uncovering generic mechanisms of morphogenesis and thus reach a better understanding of the evolution and development of multicellular phenotypes, focusing on the role of physical forces in these processes.

A study on the force balance of an unbalanced globe valve

International Nuclear Information System (INIS)

Yang, Sang Min; Cho, Taik Dong; Ko, Sung Ho; Lee, Ho Young

2007-01-01

A pneumatic control valve is a piping element that controls the volumetric flow rate and pressure of a fluid: it is necessary to analyze the characteristics of the forces with respect to the opening of the valve in order to evaluate its operating performance. The forces occurring during operation are: resisting force and actuator force, where the load resistance is mostly affected by the fluid pressure difference of the valve. In this study, a force balance equation derived from the equilibrium relationship between the resisting force and the actuator force of an unbalanced globe valve is proposed, and the force balance equations are used to model the dynamic equations of a pneumatic unbalanced globe valve installed in nuclear power plants. A CFD analysis is also carried out to evaluate the pressure distribution and forces acting on the top and bottom planes of the valve plug. The results of this analysis have been verified through experimentation. This study has shown that the fluid pressure difference between the inlet and outlet of the valve, measured from the force balance equation of an unbalanced valve, should actually be examined with the fluid-pressure difference between the top and bottom side of the valve plug

Yugoslavia: Act of 21 November 1984 on radiation protection and the safe use of nuclear energy

International Nuclear Information System (INIS)

1985-01-01

This Act which entered into force on 1 December 1984 repeals the 1976 Act on Protection against Ionizing Radiation and regulates most of the peaceful uses of nuclear energy and radiation protection in Yugoslavia. The Act lays down the licensing procedure for nuclear installations and covers safety-related questions in connection with standards, technical criteria etc. It also takes into account several areas regulated at international level, namely safeguards and physical protection of nuclear material. (NEA) [fr

Geometric Aspects of Force Controllability for a Swimming Model

International Nuclear Information System (INIS)

Khapalov, A. Y.

2008-01-01

We study controllability properties (swimming capabilities) of a mathematical model of an abstract object which 'swims' in the 2-D Stokes fluid. Our goal is to investigate how the geometric shape of this object affects the forces acting upon it. Such problems are of interest in biology and engineering applications dealing with propulsion systems in fluids

Dutch National Security Reform Under Review : Sufficient Checks and Balances in the Intelligence and Security Services Act 2017?

NARCIS (Netherlands)

Quirine Eijkman; Nico van Eijk; Robert van Schaik

2018-01-01

In May 2018, the new Dutch Intelligence and Security Services Act 2017 (Wet op de Inlichtingen- en veiligheidsdiensten, Wiv) will enter into force. It replaces the previous 2002 Act and incorporates many reforms to the information gathering powers of the two intelligence and security services as

Biomechanics of gecko locomotion: the patterns of reaction forces on inverted, vertical and horizontal substrates

International Nuclear Information System (INIS)

Wang, Zhouyi; Dai, Zhendong; Ji, Aihong; Xing, Qiang; Ren, Lei; Dai, Liming

2015-01-01

The excellent locomotion ability of geckos on various rough and/or inclined substrates has attracted scientists’ attention for centuries. However, the moving ability of gecko-mimicking robots on various inclined surfaces still lags far behind that of geckos, mainly because our understanding of how geckos govern their locomotion is still very poor. To reveal the fundamental mechanism of gecko locomotion and also to facilitate the design of gecko-mimicking robots, we have measured the reaction forces (RFs) acting on each individual foot of moving geckos on inverted, vertical and horizontal substrates (i.e. ceiling, wall and floor), have associated the RFs with locomotion behaviors by using high-speed camera, and have presented the relationships of the force components with patterns of reaction forces (PRFs). Geckos generate different PRF on ceiling, wall and floor, that is, the PRF is determined by the angles between the direction of gravity and the substrate on which geckos move. On the ceiling, geckos produce reversed shear forces acting on the front and hind feet, which pull away from the body in both lateral and fore-aft directions. They use a very large supporting angle from 21° to 24° to reduce the forces acting on their legs and feet. On the floor, geckos lift their bodies using a supporting angle from 76° to 78°, which not only decreases the RFs but also improves their locomotion ability. On the wall, geckos generate a reliable self-locking attachment by using a supporting angle of 14.8°, which is only about half of the critical angle of detachment. (paper)

THE RIGHTS GRANTED TO TRADE UNIONS UNDER THE COMPANIES ACT 71 OF 2008

Directory of Open Access Journals (Sweden)

Heidi C Schoeman

2013-08-01

Full Text Available With the entering into force of the Companies Act 71 of 2008 in 2011 a number of rights were granted to trade unions by the act. The Companies Act 71 of 2008 not only grants rights to registered trade unions, as is the case in labour law, but in some cases it grants rights to trade unions representing employees at the workplace. It is argued that rights afforded to trade unions by the act ought to be granted only to trade unions that are registered in terms of the Labour Relations Act 66 of 1995. In addition, it is also argued that the Companies Act 71 of 2008 ought in principle to differentiate between rights that are granted to registered trade unions representing employees at the workplace and rights that are granted to registered majority trade unions, or at the least to sufficiently representative trade unions.

Spatially Synchronous Extinction of Species under External Forcing

Science.gov (United States)

Amritkar, R. E.; Rangarajan, Govindan

2006-06-01

More than 99% of the species that ever existed on the surface of the Earth are now extinct and their extinction on a global scale has been a puzzle. One may think that a species under an external threat may survive in some isolated locations leading to the revival of the species. Using a general model we show that, under a common external forcing, the species with a quadratic saturation term first undergoes spatial synchronization and then extinction. The effect can be observed even when the external forcing acts only on some locations provided the dynamics contains a synchronizing term. Absence of the quadratic saturation term can help the species to avoid extinction.

Adaptive Equilibrium Regulation: A Balancing Act in Two Timescales

Science.gov (United States)

Boker, Steven M.

2015-01-01

An equilibrium involves a balancing of forces. Just as one maintains upright posture in standing or walking, many self-regulatory and interpersonal behaviors can be framed as a balancing act between an ever changing environment and within-person processes. The emerging balance between person and environment, the equilibria, are dynamic and adaptive in response to development and learning. A distinction is made between equilibrium achieved solely due to a short timescale balancing of forces and a longer timescale preferred equilibrium which we define as a state towards which the system slowly adapts. Together, these are developed into a framework that this article calls Adaptive Equilibrium Regulation (ÆR), which separates a regulatory process into two timescales: a faster regulation that automatically balances forces and a slower timescale adaptation process that reconfigures the fast regulation so as to move the system towards its preferred equilibrium when an environmental force persists over the longer timescale. This way of thinking leads to novel models for the interplay between multiple timescales of behavior, learning, and development. PMID:27066197

Identification of the nonlinear excitation force acting on a bowed string using the dynamical responses at remote locations

International Nuclear Information System (INIS)

Debut, V.; Antunes, J.; Delaune, X.

2010-01-01

For achieving realistic numerical simulations of bowed string instruments, based on physical modeling, a good understanding of the actual friction interaction phenomena is of great importance. Most work published in the field including our own has assumed that bow/string frictional forces behave according to the classical Coulomb stick-slip model, with an empirical velocity-dependent sliding friction coefficient. Indeed, the basic self-excited string motions (such as the Helmholtz regime) are well captured using such friction model. However, recent work has shown that the tribological behavior of the bow/string rosin interface is rather complex, therefore the basic velocity-dependent Coulomb model may be an over-simplistic representation of the friction force. More specifically, it was suggested that a more accurate model of the interaction force can be achieved by coupling the system dynamical equations with a thermal model which encapsulates the complex interface phenomena. In spite of the interesting work performed by Askenfelt, a direct measurement of the actual dynamical friction forces without disturbing the string motion is quite difficult. Therefore, in this work we develop a modal-based identification technique making use of inverse methods and optimization techniques, which enables the identification of the interface force, as well as the string self-excited motion, from the dynamical reactions measured at the string end supports. The method gives convincing results using simulated data originated from nonlinear computations of a bowed string. Furthermore, in cases where the force identifications are very sensitive to errors in the transfer function modal parameters, we suggest a method to improve the modal frequencies used for the identifications. Preliminary experimental results obtained using a basic bowing device, by which the string is excited with the stick of the bow, are then presented. Our identifications, from the two dynamical string reactions

Identification of Motive Forces on the Whole Body System during Walking

Directory of Open Access Journals (Sweden)

Raghdan J. AlKhoury

2010-01-01

Full Text Available Motive forces by muscles are applied to different parts of the human body in a periodic fashion when walking at a uniform rate. In this study, the whole human body is modeled as a multidegree of freedom (MDOF system with seven degrees of freedom. In view of the changing contact conditions with the ground due to alternating feet movements, the system under study is considered piecewise time invariant for each half-period when one foot is in contact with the ground. Forces transmitted from the body to the ground while walking at a normal pace are experimentally measured and numerically simulated. Fourth-order Runge-Kutta method is employed to numerically simulate the forces acting on different masses of the body. An optimization problem is formulated with the squared difference between the measured and simulated forces transmitted to the ground as the objective function, and the motive forces on the body masses as the design variables to solve.

Selective Reproductive Technologies

DEFF Research Database (Denmark)

Gammeltoft, Tine; Wahlberg, Ayo

2014-01-01

From a historical perspective, selective reproduction is nothing new. Infanticide, abandonment, and selective neglect of children have a long history, and the widespread deployment of sterilization and forced abortion in the twentieth century has been well documented. Yet in recent decades select......, discussing how selective reproduction engages with issues of long-standing theoretical concern in anthropology, such as politics, kinship, gender, religion, globalization, and inequality....... (ARTs), what we term selective reproductive technologies (SRTs) are of a more specific nature: Rather than aiming to overcome infertility, they are used to prevent or allow the birth of certain kinds of children. This review highlights anthropological research into SRTs in different parts of the world...

Atomic Energy Authority (Special Constables) Act 1976 of 10 June 1976

International Nuclear Information System (INIS)

1976-01-01

This Act, which came into force on 10th June 1976, extends the powers of the UKAEA's Special Constables (i.e. Police) so that they may be better able to safeguard fissile materials in nuclear installations and during transport. Under the Act the UKAEA's Special Constables are deemed to be Crown servants for the purposes of the Firearms Act 1968, Section 2, and it extends the kind of property in relation to which the UKAEA's Special Constables may exercise their powers when they are outside the premises within which they were appointed to act. It also extends the geographical limits within which the UKAEA's Special Constables may exercise their powers, so that their powers may now be exercised wherever they may go in order to safeguard fissile materials or to pursue persons believed to have removed or attempted to remove such materials unlawfully. (NEA) [fr

Enhancing U.S. Army Special Forces: Research and Applications

National Research Council Canada - National Science Library

Brooks, Judith

1997-01-01

.... The report gives a brief overview of research conducted to benefit Special Forces recruitment, selection, assessment, training, and soldiers in the field. At the end of each of these major sections are recommendations for Special Forces and for the Army, based on what we learned from the research. The report concludes with a discussion of future research directions.

Performance evaluation on force control for ITER blanket installation

Energy Technology Data Exchange (ETDEWEB)

Aburadani, A., E-mail: aburadani.atsushi@jaea.go.jp [Japan Atomic Energy Agency, Mukouyama 801-1, Naka, Ibaraki 311-0193 (Japan); Takeda, N.; Shigematsu, S.; Murakami, S.; Tanigawa, H.; Kakudate, S. [Japan Atomic Energy Agency, Mukouyama 801-1, Naka, Ibaraki 311-0193 (Japan); Nakahira, M.; Hamilton, D.; Tesini, A. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France)

2013-10-15

Highlights: ► It is crucial issues to avoid any jamming between the blanket modules and the keys. ► Force control for AC servo motor was developed to reduce excessive loads. ► This jam prevention force control method is directly measured and controlled by AC servo motor controllers. ► In the recent test, the module was passively positioned onto keys using the torque control method. -- Abstract: The most critical issue for the ITER blanket installation is to avoid any jamming between the blanket modules and the keys as a result of excessive loading during the module installation process. This is complicated by the limited clearance of 0.5 mm between the modules and the keys. To solve these technical issues, force control, such as controlling the torque for the AC servo motors, was developed to reduce excessive loads which may have an impact on the end-effector and to defer the forces acting on the groove of the blanket. This jam prevention force control method is directly measured and controlled by AC servo motor controllers. The AC servo motors are equipped to move the manipulator and end-effector during module installation.

Performance evaluation on force control for ITER blanket installation

International Nuclear Information System (INIS)

Aburadani, A.; Takeda, N.; Shigematsu, S.; Murakami, S.; Tanigawa, H.; Kakudate, S.; Nakahira, M.; Hamilton, D.; Tesini, A.

2013-01-01

Highlights: ► It is crucial issues to avoid any jamming between the blanket modules and the keys. ► Force control for AC servo motor was developed to reduce excessive loads. ► This jam prevention force control method is directly measured and controlled by AC servo motor controllers. ► In the recent test, the module was passively positioned onto keys using the torque control method. -- Abstract: The most critical issue for the ITER blanket installation is to avoid any jamming between the blanket modules and the keys as a result of excessive loading during the module installation process. This is complicated by the limited clearance of 0.5 mm between the modules and the keys. To solve these technical issues, force control, such as controlling the torque for the AC servo motors, was developed to reduce excessive loads which may have an impact on the end-effector and to defer the forces acting on the groove of the blanket. This jam prevention force control method is directly measured and controlled by AC servo motor controllers. The AC servo motors are equipped to move the manipulator and end-effector during module installation

Feasibility of novel four degrees of freedom capacitive force sensor for skin interface force

Directory of Open Access Journals (Sweden)

Murakami Chisato

2012-11-01

Full Text Available Abstract Background The objective of our study was to develop a novel capacitive force sensor that enables simultaneous measurements of yaw torque around the pressure axis and normal force and shear forces at a single point for the purpose of elucidating pressure ulcer pathogenesis and establishing criteria for selection of cushions and mattresses. Methods Two newly developed sensors (approximately 10 mm×10 mm×5 mm (10 and 20 mm×20 mm×5 mm (20 were constructed from silicone gel and four upper and lower electrodes. The upper and lower electrodes had sixteen combinations that had the function as capacitors of parallel plate type. The full scale (FS ranges of force/torque were defined as 0–1.5 N, –0.5-0.5 N and −1.5-1.5 N mm (10 and 0–8.7 N, –2.9-2.9 N and −16.8-16.8 N mm (20 in normal force, shear forces and yaw torque, respectively. The capacitances of sixteen capacitors were measured by an LCR meter (AC1V, 100 kHz when displacements corresponding to four degrees of freedom (DOF forces within FS ranges were applied to the sensor. The measurement was repeated three times in each displacement condition (10 only. Force/torque were calculated by corrected capacitance and were evaluated by comparison to theoretical values and standard normal force measured by an universal tester. Results In measurements of capacitance, the coefficient of variation was 3.23% (10. The Maximum FS errors of estimated force/torque were less than or equal to 10.1 (10 and 16.4% (20, respectively. The standard normal forces were approximately 1.5 (10 and 9.4 N (20 when pressure displacements were 3 (10 and 2 mm (20, respectively. The estimated normal forces were approximately 1.5 (10 and 8.6 N (10 in the same condition. Conclusions In this study, we developed a new four DOF force sensor for measurement of force/torque that occur between the skin and a mattress. In measurement of capacitance, the repeatability was good and it was confirmed that the sensor had

Loading forces in shallow water running in two levels of immersion.

Science.gov (United States)

Haupenthal, Alessandro; Ruschel, Caroline; Hubert, Marcel; de Brito Fontana, Heiliane; Roesler, Helio

2010-07-01

To analyse the vertical and anteroposterior components of the ground reaction force during shallow water running at 2 levels of immersion. Twenty-two healthy adults with no gait disorders, who were familiar with aquatic exercises. Subjects performed 6 trials of water running at a self-selected speed in chest and hip immersion. Force data were collected through an underwater force plate and running speed was measured with a photocell timing light system. Analysis of covariance was used for data analysis. Vertical forces corresponded to 0.80 and 0.98 times the subject's body weight at the chest and hip level, respectively. Anteroposterior forces corresponded to 0.26 and 0.31 times the subject's body weight at the chest and hip level, respectively. As the water level decreased the subjects ran faster. No significant differences were found for the force values between the immersions, probably due to variability in speed, which was self-selected. When thinking about load values in water running professionals should consider not only the immersion level, but also the speed, as it can affect the force components, mainly the anteroposterior one. Quantitative data on this subject could help professionals to conduct safer aqua-tic rehabilitation and physical conditioning protocols.

A magnetic gradient induced force in NMR restricted diffusion experiments

International Nuclear Information System (INIS)

Ghadirian, Bahman; Stait-Gardner, Tim; Castillo, Reynaldo; Price, William S.

2014-01-01

We predict that the phase cancellation of a precessing magnetisation field carried by a diffusing species in a bounded geometry under certain nuclear magnetic resonance pulsed magnetic field gradient sequences results in a small force over typically micrometre length scales. Our calculations reveal that the total magnetisation energy in a pore under the influence of a pulsed gradient will be distance-dependent thus resulting in a force acting on the boundary. It is shown that this effect of the magnetisation of diffusing particles will appear as either an attractive or repulsive force depending on the geometry of the pore and magnetic properties of the material. A detailed analysis is performed for the case of a pulsed gradient spin-echo experiment on parallel planes. It is shown that the force decays exponentially in terms of the spin-spin relaxation. The proof is based on classical electrodynamics. An application of this effect to soft matter is suggested

Ponderomotive force, magnetic fields and hydrodynamics of laser produced plasmas

International Nuclear Information System (INIS)

Bobin, J.-L.; Wee Woo; Degroot, J.-S.

1977-01-01

Nonlinear effects deeply change the structure of a laser driven plasma flow. For high intensities, the radiation pressure should be taken into account. It acts through a ponderomotive force proportional to the electron density and to the gradient of the mean electric field energy density of the incident wave. Static magnetic fields originate from a term in the ponderomotive force which includes radiation absorption and whose curl is non zero. The basic properties of the structure are determined analytically in the absence of thermal conductivity and magnetic fields: steep density gradient close to the cut-off density, shelf at lower densities. The conditions of a steady state regime are set up. The isothermal case is specially investigated. It is shown that the cavities which are created in a motionless plasma may disappear due to the onset of a flow. Regions in which electromagnetic forces arising from the static field compensate the ponderomotive force are determined. The subsequent effects on the flow itself are studied [fr

Application of Taguchi method for cutting force optimization in rock

Indian Academy of Sciences (India)

In this paper, an optimization study was carried out for the cutting force (Fc) acting on circular diamond sawblades in rock sawing. The peripheral speed, traverse speed, cut depth and flow rate of cooling fluid were considered as operating variables and optimized by using Taguchi approach for the Fc. L16(44) orthogonal ...

Minutes and group memories from all NERBC/USGS-RPA power plant siting task force meetings through October, 1980. Appendix

International Nuclear Information System (INIS)

1980-11-01

The New England River Basins Commission/United States Geological Survey-Resource Planning Analysis Office (NERBC/USGS-RPA) Power Plant Siting Task Force has formerly met seven times between July 1979 and August 1980. At the first meeting on July 13, 1979, the members agreed that there were many problems with the current process of selecting sites for power plants in New England, and that they would work by consensus to find solutions for these problems. At the second meeting on October 19, 1979, NERBC staff presented information on the site selection and approval processes in New England. The Task Force began a preliminary discussion of problems in these processes, and agreed that the initial scope of work of the Task Force would focus on issues in site selection. At the third meeting on January 18, 1980, the Task Force began initial discussions in three areas: imperfections in the site selection process, stakeholders in the site selection process, and principles to guide solutions to the problems in site selection. On March 7, 1980, at the fourth meeting, the Task Force continued discussions on imperfections, stakeholders, and principles. At the fifth meeting on May 2, 1980, the Task Force reached a wide range of agreements on the difficulties encountered in the site selection process and on the principles guiding problem solving in site selection. At the sixth meeting on May 29, 1980, the Task Force focused on solutions to the problems identified at earlier meetings. Groups of Task Force members constructed eight different scenarios describing alternative power plant siting processes. In July 1980, the Task Force met for the seventh time and refined the eight scenarios, paring them down to five. An attempt was made to develop two scenarios using the common elements from the five. One of these two graphic models was based on government involvement in the site selection process, and the other was based on stakeholder involvement in the process

Self-Evident Truths: Why We Can Stop Worrying and Love the Posse Comitatus Act

National Research Council Canada - National Science Library

Gentry, Chris R

2008-01-01

.... The author presents an analysis that outlines the evolution of legal theory and acts pertaining to the use of the military in domestic crises and past and current applications of military force in the United States...

Advocating for School Psychologists in Response to the APA's Proposed "Model Act for State Licensure of Psychologists"

Science.gov (United States)

Skalski, Anastasia Kalamaros

2009-01-01

On March 6, 2009, the APA Model Licensure Act Task Force released its second draft of the policy document known as the proposed "Model Act for State Licensure of Psychologists". This policy document serves as guidance to state legislatures for how they should set up their psychology licensing laws. The general expectations promoted in the model…

Lingual biomechanics, case selection and success

Directory of Open Access Journals (Sweden)

Sanjay Labh

2016-01-01

Full Text Available Deeper understanding of lingual biomechanics is prerequisite for success with lingual appliance. The difference between labial and lingual force system must be understood and kept in mind during treatment planning, especially anchorage planning, and extraction decision-making. As point of application of force changes, it completely changes the force system in all planes. This article describes lingual biomechanics, anchorage planning, diagnostic considerations, treatment planning, and case selection criteria in lingual orthodontics.

Regulation No. 54/2006 Coll. of the Nuclear Regulatory Authority of the Slovak Republic dated as of January 12, 2006 on accountancy and control of nuclear material as well as notification of selected activities

International Nuclear Information System (INIS)

2006-01-01

This Regulation provides details on (a) keeping operating records; (b) preparing and submitting reports on inventory change; c) the manner of reporting and information on events related to the operation of surveillance equipment and nuclear materials; (d) the content, scope and method of reporting activities under par. 3 Subs. 11 and 12 of the Act No. 541/2006 Coll. (the 'Selected Activities'). This Regulation came into force on March 1, 2006.

The State Surveillance over Nuclear Safety of Nuclear Facilities Act No. 28/1984

International Nuclear Information System (INIS)

1995-01-01

The Act lays down responsibilities of the Czechoslovak Atomic Energy Commission in the field of state surveillance over nuclear safety of nuclear facilities; determines the responsibilities of nuclear safety inspectors in their inspection activities; specifies duties of bodies and corporations responsible for nuclear safety of nuclear facilities; stipulates the obligation to set up emergency plans; and specifies penalties imposed on corporations and individuals for noncompliance with nuclear safety provisions. The Act entered into force on 4 April 1984. (J.B.)

Act No. 84 amending the decision of the Ministry of Communications on Transport of Dangerous Substances by Road

International Nuclear Information System (INIS)

1987-01-01

This Act amends Decision No. 610 of 1978 of the Ministry of Communications on the Transport of Dangerous Substances by Road, which also covers radioactive substances; the amendments in their respect set out in the Annexes are of a technical nature. The Act entered into force on 1 April 1987. (NEA) [fr

Reducing detrimental electrostatic effects in Casimir-force measurements and Casimir-force-based microdevices

Science.gov (United States)

Xu, Jun; Klimchitskaya, G. L.; Mostepanenko, V. M.; Mohideen, U.

2018-03-01

It is well known that residual electrostatic forces create significant difficulties in precise measurements of the Casimir force and the wide use of Casimir-operated microdevices. We experimentally demonstrate that, with the help of Ar-ion cleaning of the surfaces, it is possible to make electrostatic effects negligibly small compared to the Casimir interaction. Our experimental setup consists of a dynamic atomic force microscope supplemented with an Ar-ion gun and argon reservoir. The residual potential difference between the Au-coated surfaces of a sphere and those of a plate was measured both before and after in situ Ar-ion cleaning. It is shown that this cleaning decreases the magnitude of the residual potential by up to an order of magnitude and makes it almost independent of the separation. The gradient of the Casimir force was measured using ordinary samples subjected to Ar-ion cleaning. The obtained results are shown to be in good agreement both with previous precision measurements using specially selected samples and with theoretical predictions of the Lifshitz theory. The conclusion is made that the suggested method of in situ Ar-ion cleaning is effective in reducing the electrostatic effects and therefore is a great resource for experiments on measuring the Casimir interaction and for Casimir-operated microdevices.

Influence of flow force on the flapper of a water hydraulic servovalve; Suiatsu servo ben no flapper ni sayosuru ryutairyoku no eikyo

Energy Technology Data Exchange (ETDEWEB)

Urata, E. [Kanagawa University, Kanagawa (Japan). Faculty of Engineering; Yamashina, C. [Ebara Research Co. Ltd., Kanagawa (Japan)

1997-06-25

In this paper flow force due to nozzle flow and its influence on the flapper-nozzle system for water hydraulic servovalves are discussed. The flow force acting on the flapper is estimated using the momentum theory, and expressed as a function of the nozzle pressure and flapper-nozzle gap. Analysis shows that the double nozzle flapper gives a quasilinear characteristic to the relationship between the force on the flapper, the flapper gap and the spool velocity. The numerical result based on the theory is used to estimate accuracy of the classical linear approximation. The flow force reduces the magnitude of the change of the nozzle back pressures which drive the spool of the water hydraulic valve, because the input moment acting on the armature is resisted by the moment due to the flow force. Experimental verification of the theory is also given. 7 refs., 10 figs., 1 tab.

Generating a stationary infinite range tractor force via a multimode optical fibre

Science.gov (United States)

Ebongue, C. A.; Holzmann, D.; Ostermann, S.; Ritsch, H.

2017-06-01

Optical fibres confine and guide light almost unattenuated and thus convey light forces to polarizable nano-particles over very long distances. Radiation pressure forces arise from scattering of guided photons into free space while gradient forces are based on coherent scattering between different fibre modes or propagation directions. Interestingly, even scattering between co-propagating modes induces longitudinal forces as the transverse confinement of the light modes creates mode dependent longitudinal wave-vectors and photon momenta. We generalize a proven scattering matrix based approach to calculate single as well as inter-particle forces to include several forward and backward propagating modes. We show that an injection of the higher order mode only in a two mode fibre will induce a stationary tractor force against the injection direction, when the mode coupling to the lower order mode dominates against backscattering and free space losses. Generically this arises for non-absorbing particles at the centre of a waveguide. The model also gives improved predictions for inter-particle forces in evanescent nanofibre fields as experimentally observed recently. Surprisingly strong tractor forces can also act on whole optically bound arrays.

Optical force on diseased blood cells: Towards the optical sorting of biological matter

KAUST Repository

Gongora, J. S. Totero; Fratalocchi, Andrea

2015-01-01

By employing a series of massively parallel ab-initio simulations, we study how optical forces act on biological matter subject to morphological disease. As a representative case study, we here consider the case of Plasmodium falciparum on red blood

Force and torque of a string on a pulley

Science.gov (United States)

de Oliveira, Thiago R.; Lemos, Nivaldo A.

2018-04-01

Every university introductory physics course considers the problem of Atwood's machine taking into account the mass of the pulley. In the usual treatment, the tensions at the two ends of the string are offhandedly taken to act on the pulley and be responsible for its rotation. However, such a free-body diagram of the forces on the pulley is not a priori justified, inducing students to construct wrong hypotheses such as that the string transfers its tension to the pulley or that some symmetry is in operation. We reexamine this problem by integrating the contact forces between each element of the string and the pulley and show that although the pulley does behave as if the tensions were acting on its ends, this comes only as the final result of a detailed analysis. We also address the question of how much friction is needed to prevent the string from slipping over the pulley. Finally, we deal with the case in which the string is on the verge of sliding and show that this cannot happen unless certain conditions are met by the coefficient of static friction and the masses involved.

Propellant Slosh Force and Mass Measurement

Directory of Open Access Journals (Sweden)

Andrew Hunt

2018-01-01

Full Text Available We have used electrical capacitance tomography (ECT to instrument a demonstration tank containing kerosene and have successfully demonstrated that ECT can, in real time, (i measure propellant mass to better than 1% of total in a range of gravity fields, (ii image propellant distribution, and (iii accurately track propellant centre of mass (CoM. We have shown that the ability to track CoM enables the determination of slosh forces, and we argue that this will result in disruptive changes in a propellant tank design and use in a spacecraft. Ground testing together with real-time slosh force data will allow an improved tank design to minimize and mitigate slosh forces, while at the same time keeping the tank mass to a minimum. Fully instrumented Smart Tanks will be able to provide force vector inputs to a spacecraft inertial navigation system; this in turn will (i eliminate or reduce navigational errors, (ii reduce wait time for uncertain slosh settling, since actual slosh forces will be known, and (iii simplify slosh control hardware, hence reducing overall mass. ECT may be well suited to space borne liquid measurement applications. Measurements are independent of and unaffected by orientation or levels of g. The electronics and sensor arrays can be low in mass, and critically, the technique does not dissipate heat into the propellant, which makes it intrinsically safe and suitable for cryogenic liquids. Because of the limitations of operating in earth-bound gravity, it has not been possible to check the exact numerical accuracy of the slosh force acting on the vessel. We are therefore in the process of undertaking a further project to (i build a prototype integrated “Smart Tank for Space”, (ii undertake slosh tests in zero or microgravity, (iii develop the system for commercial ground testing, and (iv qualify ECT for use in space.

Optical pulling and pushing forces exerted on silicon nanospheres with strong coherent interaction between electric and magnetic resonances.

Science.gov (United States)

Liu, Hongfeng; Panmai, Mingcheng; Peng, Yuanyuan; Lan, Sheng

2017-05-29

We investigated theoretically and numerically the optical pulling and pushing forces acting on silicon (Si) nanospheres (NSs) with strong coherent interaction between electric and magnetic resonances. We examined the optical pulling and pushing forces exerted on Si NSs by two interfering waves and revealed the underlying physical mechanism from the viewpoint of electric- and magnetic-dipole manipulation. As compared with a polystyrene (PS) NS, it was found that the optical pulling force for a Si NS with the same size is enlarged by nearly two orders of magnitude. In addition to the optical pulling force appearing at the long-wavelength side of the magnetic dipole resonance, very large optical pushing force is observed at the magnetic quadrupole resonance. The correlation between the optical pulling/pushing force and the directional scattering characterized by the ratio of the forward to backward scattering was revealed. More interestingly, it was found that the high-order electric and magnetic resonances in large Si NSs play an important role in producing optical pulling force which can be generated by not only s-polarized wave but also p-polarized one. Our finding indicates that the strong coherent interaction between the electric and magnetic resonances existing in nanoparticles with large refractive indices can be exploited to manipulate the optical force acting on them and the correlation between the optical force and the directional scattering can be used as guidance. The engineering and manipulation of optical forces will find potential applications in the trapping, transport and sorting of nanoparticles.

Is rheumatoid arthritis a consequence of natural selection for enhanced tuberculosis resistance?

Science.gov (United States)

Mobley, James L

2004-01-01

Although the bubonic plague or "Black Death" is notorious for the toll it took on the population of Europe in the middle ages, another epidemic, the "White Death" of tuberculosis is responsible for millions of deaths worldwide over the past 300 years. With one in four deaths due to tuberculosis in Western Europe and the United States in the 19th century, this disease undoubtedly acted as a powerful genetic selective force. The epidemiology of modern day rheumatoid arthritis (RA) is strikingly similar to the epidemiology of tuberculosis 100-200 years ago, suggesting the possibility that genetic factors that enhanced survival in tuberculosis epidemics are now influencing susceptibility to RA. Recent advances in the analysis of genetic polymorphisms associated with disease have identified several genes linked to RA susceptibility that encode proteins involved in the immune response to Mycobacterium tuberculosis infection, including TNF-alpha, NRAMP1, PARP-1, HLA-DRB1, and PADI4. These results suggest that rheumatoid arthritis, and possibly other autoimmune diseases, are modern day manifestations of the genetic selective pressure exerted by tuberculosis epidemics of the recent past.

Designing an experiment to measure cellular interaction forces

Science.gov (United States)

McAlinden, Niall; Glass, David G.; Millington, Owain R.; Wright, Amanda J.

2013-09-01

Optical trapping is a powerful tool in Life Science research and is becoming common place in many microscopy laboratories and facilities. The force applied by the laser beam on the trapped object can be accurately determined allowing any external forces acting on the trapped object to be deduced. We aim to design a series of experiments that use an optical trap to measure and quantify the interaction force between immune cells. In order to cause minimum perturbation to the sample we plan to directly trap T cells and remove the need to introduce exogenous beads to the sample. This poses a series of challenges and raises questions that need to be answered in order to design a set of effect end-point experiments. A typical cell is large compared to the beads normally trapped and highly non-uniform - can we reliably trap such objects and prevent them from rolling and re-orientating? In this paper we show how a spatial light modulator can produce a triple-spot trap, as opposed to a single-spot trap, giving complete control over the object's orientation and preventing it from rolling due, for example, to Brownian motion. To use an optical trap as a force transducer to measure an external force you must first have a reliably calibrated system. The optical trapping force is typically measured using either the theory of equipartition and observing the Brownian motion of the trapped object or using an escape force method, e.g. the viscous drag force method. In this paper we examine the relationship between force and displacement, as well as measuring the maximum displacement from equilibrium position before an object falls out of the trap, hence determining the conditions under which the different calibration methods should be applied.

STS-51 preparation: ACTS, ORFEUS, Discovery in VAB

Science.gov (United States)

1993-01-01

In NASA's building AM on Cape Canaveral Air Force Station, STS-51 mission specialist Carl Walz (right) and Deutsche Aerospace technician Gregor Dawidowitsch check over the scientific instruments mounted on the Shuttle Pallet Satellite (SPAS) carrier (38573); The Orbiting and Retrievable Far and Extreme Ultraviolet Spectrometer (ORFEUS) and SPAS is readied for hoisting into a test cell at the Vertical Processing Facility (VPF) (38574); Mating of the Advanced Communications Technology Satellite (ACTS) with the Transfer Orbit Stage (TOS) booster is under way in the Payload Hazardous Servicing Facility (PHSF) (38575); The mated ACTS and TOS are ready to be moved from the PHSF to the Vertical Processsing Facility (VPF) (38576); The orbiter Discovery is rolled into the Vehicle Assembly Building (VAB) for mating with the external tank and twin solid rocket boosters (38577-8).

Quantitative Analysis of Lateral Pinch Force in Quadriplegic Patients Using Functional Neuromuscular Stimulation with Computer Stimulation

Directory of Open Access Journals (Sweden)

Ali Esteki

2004-10-01

Full Text Available Objective: In some applications of functional neuromuscular stimulation (FNS, the distal joint of the thumb (IP in quadriplegic patients is sometimes surgically fused at zero degrees and the FPL is stimulated. This prevents hyperextension and extreme flexion of the IP joint during lateral pinch. However, IP joint fusion removes one degree of freedom from the thumb and may reduce the grip force. An alternative approach, preferably without surgical alterations, using sufficient electrical stimulation of selected muscles was investigated. A 3D model of prehensile lateral pinch was developed. Computer simulation of the model was used to find an approach providing the appropriate posture and adequate lateral grip force for quadriplegic patients using FNS. Materials & Methods: The model consists of a multi-rigid-body system connected by one or two degree(s of freedom joints acted upon by passive resistive moments, active muscle moments and moments of external contact forces. Passive resistive moments were measured at each joint, active muscle moments were computed using a simple muscle model, and moments of external force were computed based on a force-displacement relationship for finger pads. In addition to the current strategy, two possible alternatives were studied: increasing the fused joint angle and activation of multiple muscles without joint fusion. Normal component of the grip force and its angle with respect to the horizontal plane were computed and compared for the studied cases. Results: Results showed, by using the current FNS strategy, a convenient posture and a grip force of 10.1 (N are achieved which is comparable to what is measured experimentally and introduced in the literature. Increasing the joint fusion angle from 0 to 15 and 30 degrees in parallel with the activation of FPL increased the grip force from 10.1 to 10.7 and 11.2 (N, respectively, but resulted in inconvenient posture. Among all different combinations of the muscles

Selective particle trapping using an oscillating microbubble.

Science.gov (United States)

Rogers, Priscilla; Neild, Adrian

2011-11-07

The ability to isolate and sort analytes within complex microfluidic volumes is essential to the success of lab-on-a-chip (LOC) devices. In this study, acoustically-excited oscillating bubbles are used to selectively trap particles, with the selectivity being a function of both particle size and density. The operating principle is based on the interplay between the strong microstreaming-induced drag force and the attractive secondary Bjerknes force. Depending upon the size of the bubble, and thus its resonant frequency, it is possible to cause one force to dominate over the other, resulting in either particle attraction or repulsion. A theoretical analysis reveals the extent of the contribution of each force for a given particle size; in close agreement with experimental findings. Density-based trapping is also demonstrated, highlighting that denser particles experience a larger secondary Bjerknes force resulting in their attraction. This study showcases the excellent applicability and versatility of using oscillating bubbles as a trapping and sorting mechanism within LOC devices. This journal is © The Royal Society of Chemistry 2011

Why the Community Reinvestment Act cannot be blamed for the subprime crisis

NARCIS (Netherlands)

Aalbers, M.B.

2009-01-01

It has become common practice—and in particular, but not exclusively, in conservative media—to blame the Community Reinvestment Act (CRA) of 1977 for the U.S. subprime mortgage and foreclosure crisis that triggered the global financial crisis. It is argued that the CRA forced lenders to give

Pushing nanoparticles with light — A femtonewton resolved measurement of optical scattering forces

Directory of Open Access Journals (Sweden)

C. Zensen

2016-05-01

Full Text Available Optomechanical manipulation of plasmonic nanoparticles is an area of current interest, both fundamental and applied. However, no experimental method is available to determine the forward-directed scattering force that dominates for incident light of a wavelength close to the plasmon resonance. Here, we demonstrate how the scattering force acting on a single gold nanoparticle in solution can be measured. An optically trapped 80 nm particle was repetitively pushed from the side with laser light resonant to the particle plasmon frequency. A lock-in analysis of the particle movement provides a measured value for the scattering force. We obtain a resolution of less than 3 femtonewtons which is an order of magnitude smaller than any measurement of switchable forces performed on nanoparticles in solution with single beam optical tweezers to date. We compared the results of the force measurement with Mie simulations of the optical scattering force on a gold nanoparticle and found good agreement between experiment and theory within a few fN.

Cellular dynamics of bovine aortic smooth muscle cells measured using MEMS force sensors

Science.gov (United States)

Tsukagoshi, Takuya; Nguyen, Thanh-Vinh; Hirayama Shoji, Kayoko; Takahashi, Hidetoshi; Matsumoto, Kiyoshi; Shimoyama, Isao

2018-04-01

Adhesive cells perceive the mechanical properties of the substrates to which they adhere, adjusting their cellular mechanical forces according to their biological characteristics. This mechanical interaction subsequently affects the growth, locomotion, and differentiation of the cell. However, little is known about the detailed mechanism that underlies this interaction between adherent cells and substrates because dynamically measuring mechanical phenomena is difficult. Here, we utilize microelectromechamical systems force sensors that can measure cellular traction forces with high temporal resolution (~2.5 µs) over long periods (~3 h). We found that the cellular dynamics reflected physical phenomena with time scales from milliseconds to hours, which contradicts the idea that cellular motion is slow. A single focal adhesion (FA) generates an average force of 7 nN, which disappears in ms via the action of trypsin-ethylenediaminetetraacetic acid. The force-changing rate obtained from our measurements suggests that the time required for an FA to decompose was nearly proportional to the force acting on the FA.

Stress energy of elastic globe in curved space and a slip-out force

International Nuclear Information System (INIS)

Sokolov, S.N.

1990-01-01

The energy of stresses in an elastic globe in the flat space and in curved space is expressed through scalar invariants of the curved space. This energy creates an additional force acting on elastic bodies in a gravitational field. 4 refs

Improving the Air Force Squadron Command Selection Process

Science.gov (United States)

2017-04-19

8 maturity in the unit, selectively-manned versus non-volunteer members, and individual motivations. These characteristics work in conjunction... maturity among members allows leaders to devote attention to larger problems and issues. Similarly, a solid staff of strong Senior NCOs, NCOs, and...personal interviews combined with psychological testing. Personality tests such as the Myers-Briggs Type Indicator, Judgement Index, Emotional

Assessing the industry using Porter's five forces.

Science.gov (United States)

2014-01-01

To develop a business and plan for the future, there is a need to assess the current situation. One way of doing this is to use Porter's five forces framework. This was the brainchild of Harvard Business School's Michael Porter and developed in 1979. Looking at the competitive intensity of an industry, the model assesses internal and external factors that act together to determine the direction of the business; taken together, this gives an indication of the attractiveness of the industry.

"A Completely New Approach" to Indigenous Cultural Heritage: Evaluating the Queensland Aboriginal Cultural Heritage Act

Directory of Open Access Journals (Sweden)

Mark E. O'Neill

2018-01-01

Full Text Available The Aboriginal Cultural Heritage Act 2003 challenged the hegemony that Western, archaeological methodologies has held over Indigenous cultural heritage in Australia. By choosing to relinquish state control and authority over cultural heritage in favour of the expertise of Indigenous people, the Act created a unique and innovative heritage policy. Over the 10 years the Act has been in force, it has seen a variety of approaches adopted as part of myriad projects. This has created a mature field of practice for investigation and analysis. This article examines and critiques the Act to determine its successes and weaknesses. In doing so, it offers opportunities for other policy-makers to consider as part of policy review.

Pull-out test of stud bolts embedded in concrete under an in-plane force

International Nuclear Information System (INIS)

Inada, Y.; Saito, H.; Torita, H.; Takiguchi, K.; Ibe, Y.; Taira, T.

1995-01-01

There are many steel plates with stud bolts embedded in the R C walls of a nuclear reactor building to support equipment and piping. Under a earthquake, the steel plates are submitted to an out-of-plane force due to the inertia force acting upon equipment and piping. Furthermore, the walls are submitted to an in-plane force, and cracks may occur. A large number of experimental studies have been carried out on the pull-out strength of stud bolts embedded in concrete. Few studies have been performed to understand the strength of stud bolts embedded in concrete under an in-plane force and, further, not any one on the strength for concrete under in-plane force simultaneously to stud bolts under out-of-plane force. This paper describes a test performed to understand the pull-out strength determined by this interaction of in-plane and out-of-plane forces. (author). 5 refs., 9 figs., 5 tabs

25 CFR 700.33 - Act (The Act).

Science.gov (United States)

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Act (The Act). 700.33 Section 700.33 Indians THE OFFICE OF NAVAJO AND HOPI INDIAN RELOCATION COMMISSION OPERATIONS AND RELOCATION PROCEDURES General Policies and Instructions Definitions § 700.33 Act (The Act). (a) The Act. The Act is Pub. L. 93-531, (88 Stat...

Feasibility design of a floating airport and estimation of environmental forces on it; Futaishiki kuko no sekkei to kankyo gairyoku no suitei ni kansuru kento

Energy Technology Data Exchange (ETDEWEB)

Inoue, Y.; Tabeta, S.; Takei, Y. [Yokohama National University, Yokohama (Japan). Faculty of Engineering

1996-12-31

A rough design was performed on a floating airport. On this floating structure, environmental external force was estimated, mooring design was carried out, and discussions was given on the position retaining performance important for airport functions and behavior of the floating structure. The discussion was given on cases that the airport is surrounded and not surrounded by floating breakwaters. A floating structure which becomes super-large in size requires considerations on force due to sea level gradient as a result of a tide. Deriving flow condition changes and force acting on the floating structure simultaneously by using numerical calculations makes it possible to estimate current force given with considerations on influence of the flow conditions created by installing the floating airport. Estimation was carried out by using a zone dividing method on wave drifting force acting upon the floating airport. As a result, it was found that installing floating and permeating type breakwaters can reduce the wave drifting force acting on the floating airport. The wave drifting force working on the floating airport can be reduced by installing the floating and permeating type breakwaters to lower levels than when no such breakwaters are installed. The airport may be moored with less number of fenders when the fenders of the same type are used. 18 refs., 10 figs., 5 tabs.

Coulomb torque - a general theory for electrostatic forces in many-body systems

International Nuclear Information System (INIS)

Khachatourian, Armik V M; Wistrom, Anders O

2003-01-01

In static experiments that comprise three conducting spheres suspended by torsion wires and held at constant electric potential, a net angular displacement about their centres has been observed. We demonstrate that the observed rotation is consistent with Coulomb's law of electrical forces complemented by Gauss' surface integrals for electrical potential. Analysis demonstrates that electrostatic torque is the result of electrostatic forces acting on an asymmetric distribution of charges residing on the surfaces of the spheres. The asymptotic value for electrostatic torque is proportional to the inverse of the fourth power of separation distance with the rotation direction, up or down taken perpendicular to a plane passing through sphere centres, given explicitly by the equation for torque. The identification of electrostatic torque prompts further analysis of models of matter at all size scales where electrostatic forces are the dominant operative force

Coulomb torque - a general theory for electrostatic forces in many-body systems

CERN Document Server

Khachaturian, A V M

2003-01-01

In static experiments that comprise three conducting spheres suspended by torsion wires and held at constant electric potential, a net angular displacement about their centres has been observed. We demonstrate that the observed rotation is consistent with Coulomb's law of electrical forces complemented by Gauss' surface integrals for electrical potential. Analysis demonstrates that electrostatic torque is the result of electrostatic forces acting on an asymmetric distribution of charges residing on the surfaces of the spheres. The asymptotic value for electrostatic torque is proportional to the inverse of the fourth power of separation distance with the rotation direction, up or down taken perpendicular to a plane passing through sphere centres, given explicitly by the equation for torque. The identification of electrostatic torque prompts further analysis of models of matter at all size scales where electrostatic forces are the dominant operative force.

Controlling the Casimir force via the electromagnetic properties of materials

International Nuclear Information System (INIS)

Yang Yaping; Chen Hong; Zeng Ran; Zhu Shiyao; Zubairy, M. Suhail

2010-01-01

The control of the Casimir force between two parallel plates can be achieved through adjusting the frequency-dependent electromagnetic properties of materials of the two plates. We show that, for different plate separations, the main contribution to the Casimir force comes from different frequency regions: For smaller (larger) separation, it comes from the higher (lower) frequency region. When the separation of the plates increases, the Casimir force can vary from attractive to repulsive and/or vice versa, by selecting the two plates with suitable electromagnetic properties. We discuss how a restoring Casimir force, which varies from repulsive to attractive by increasing the separation, can be realized and that the stable equilibrium is formed at zero Casimir force.

Optical properties of gold films and the Casimir force

International Nuclear Information System (INIS)

Svetovoy, V. B.; Zwol, P. J. van; Palasantzas, G.; De Hosson, J. Th. M.

2008-01-01

Precise optical properties of metals are very important for accurate prediction of the Casimir force acting between two metallic plates. Therefore we measured ellipsometrically the optical responses of Au films in a wide range of wavelengths from 0.14 to 33 μm. The films at various thicknesses were deposited at different conditions on silicon or mica substrates. Considerable variation of the frequency dependent dielectric function from sample to sample was found. Detailed analysis of the dielectric functions was performed to check the Kramers-Kronig consistency, and extract the Drude parameters of the films. It was found that the plasma frequency varies in the range from 6.8 to 8.4 eV. It is suggested that this variation is related with the film density. X-ray reflectivity measurements support qualitatively this conclusion. The Casimir force is evaluated for the dielectric functions corresponding to our samples, and for that typically used in the precise prediction of the force. The force for our films was found to be 5%-14% smaller at a distance of 100 nm between the plates. Noise in the optical data is responsible for the force variation within 1%. It is concluded that prediction of the Casimir force between metals with a precision better than 10% must be based on the material optical response measured from visible to mid-infrared range

New Danish Company Act on Shareholders' Agreements

DEFF Research Database (Denmark)

Werlauff, Erik

2011-01-01

) organizational rights, (2) financial rights, and (3) rights of disposal, or in plainer words, the corporate (1) power, (2) money, and (3) exit. If a shareholders’ agreement is thoroughly kept and respected by all parties, both in the way they vote at general assemblies and in the way they act when wishing....... The substantial elements in many agreements are clauses on (1) voting for board candidates, (2) voting for dividends of certain proportions, and (3) first refusal rights, respectively, call options for shares in the company. Such clauses are at the very roots of corporate law, dealing with the shareholders’ (1......Section 82 of the Danish Company Act, in force from 1 March 2010, provides that ‘Shareholders’ agreements are neither binding on the company nor on decisions taken by the general assembly’. This has far-reaching consequences for shareholders’ agreements, also for already existing agreements...

Calculation of the TileCal magnetic forces using 3D Tosca model

International Nuclear Information System (INIS)

Morozov, N.A.; Samsonov, E.V.; Vorozhtsov, S.B.; Nessi, M.

1998-01-01

The purpose of the given paper is to contribute to the new summary (taking into account the latest information) of magnetic forces, acting on various parts of the TileCal of the ATLAS detector (LHC, CERN). To get an impression of the field distribution in the vicinity of the objects under consideration of existing 3D Tosca field model of the detector was used. The detailed distribution of forces along the border of various parts of the system, derived here, is valuable for understanding the mechanics of system performance

[Hunger strike and forced feeding: a historical look at medical practices].

Science.gov (United States)

Rieder, Jean-Pierre; Huber-Giseke, Tina; Getaz, Laurent; Kramer-Gauchat, Marie-Claire; Nyffenegger, Laurent; Gaspoz, Jean-Michel; Wolff, Hans

2010-12-01

Hunger strike is not a disease but a common situation in prisons. This article takes a historical look at medical practices in connection with the forced feeding of hunger strikers. We now know the fate of the strikers who were subjected to forced feeding. Depending on the context and the political situation in the country, the fate of these people, mostly political prisoners, is described as humiliating and abominable frequently ending in death or irreparable consequences. Particularly difficult for health professionals, this act raises clinical, ethical and legal questions and refers to the fundamental principles of medicine.

Ideal quantum gas in an expanding cavity: nature of nonadiabatic force.

Science.gov (United States)

Nakamura, K; Avazbaev, S K; Sobirov, Z A; Matrasulov, D U; Monnai, T

2011-04-01

We consider a quantum gas of noninteracting particles confined in the expanding cavity and investigate the nature of the nonadiabatic force which is generated from the gas and acts on the cavity wall. First, with use of the time-dependent canonical transformation, which transforms the expanding cavity to the nonexpanding one, we can define the force operator. Second, applying the perturbative theory, which works when the cavity wall begins to move at time origin, we find that the nonadiabatic force is quadratic in the wall velocity and thereby does not break the time-reversal symmetry, in contrast with general belief. Finally, using an assembly of the transitionless quantum states, we obtain the nonadiabatic force exactly. The exact result justifies the validity of both the definition of the force operator and the issue of the perturbative theory. The mysterious mechanism of nonadiabatic transition with the use of transitionless quantum states is also explained. The study is done for both cases of the hard- and soft-wall confinement with the time-dependent confining length. ©2011 American Physical Society

Force prediction in permanent magnet flat linear motors (abstract)

International Nuclear Information System (INIS)

Eastham, J.F.; Akmese, R.

1991-01-01

The advent of neodymium iron boron rare-earth permanent magnet material has afforded the opportunity to construct linear machines of high force to weight ratio. The paper describes the design and construction of an axial flux machine and rotating drum test rig. The machine occupies an arc of 45 degree on a drum 1.22 m in diameter. The excitation is provided by blocks of NdFeB material which are skewed in order to minimize the force variations due to slotting. The stator carries a three-phase short-chorded double-layer winding of four poles. The machine is supplied by a PWM inverter the fundamental component of which is phase locked to the rotor position so that a ''dc brushless'' drive system is produced. Electromagnetic forces including ripple forces are measured at supply frequencies up to 100 Hz. They are compared with finite-element analysis which calculates the force variation over the time period. The paper then considers some of the causes of ripple torque. In particular, the force production due solely to the permanent magnet excitation is considered. This has two important components each acting along the line of motion of the machine, one is due to slotting and the other is due to the finite length of the primary. In the practical machine the excitation poles are skewed to minimize the slotting force and the effectiveness of this is confirmed by both results from the experiments and the finite-element analysis. The end effect force is shown to have a space period of twice that of the excitation. The amplitude of this force and its period are again confirmed by practical results

Selective recruitment of single motor units in human flexor digitorum superficialis muscle during flexion of individual fingers.

Science.gov (United States)

Butler, T J; Kilbreath, S L; Gorman, R B; Gandevia, S C

2005-08-15

Flexor digitorum superficialis (FDS) is an extrinsic multi-tendoned muscle which flexes the proximal interphalangeal joints of the four fingers. It comprises four digital components, each with a tendon that inserts onto its corresponding finger. To determine the degree to which these digital components can be selectively recruited by volition, we recorded the activity of a single motor unit in one component via an intramuscular electrode while the subject isometrically flexed each of the remaining fingers, one at a time. The finger on which the unit principally acted was defined as the 'test finger' and that which flexed isometrically was the 'active' finger. Activity in 79 units was recorded. Isometric finger flexion forces of 50% maximum voluntary contraction (MVC) activated less than 50% of single units in components of FDS acting on fingers that were not voluntarily flexed. With two exceptions, the median recruitment threshold for all active-test finger combinations involving the index, middle, ring and little finger test units was between 49 and 60% MVC (60% MVC being the value assigned to those not recruited). The exceptions were flexion of the little finger while recording from ring finger units (median: 40% MVC), and vice versa (median: 2% MVC). For all active-test finger combinations, only 35/181 units were activated when the active finger flexed at less than 20% MVC, and the fingers were adjacent for 28 of these. Functionally, to recruit FDS units during grasping and lifting, relatively heavy objects were required, although systematic variation occurred with the width of the object. In conclusion, FDS components can be selectively activated by volition and this may be especially important for grasping at high forces with one or more fingers.

DETERMINATION THE PERMISSIBLE FORCES IN ASSESSING THE LIFT RESISTANT FACTOR OF FREIGHT CARS IN TRAINS

Directory of Open Access Journals (Sweden)

A. O. Shvets

2016-02-01

Full Text Available Purpose. In the analytical research are considered: 1 relationships between the longitudinal force acting on the car in the train; 2 lateral and vertical forces of interaction in the contact zone «wheel – rail»; 3 dynamic indicators of cars with the magnitude of the car lift resistance factor; 4 obtaining of the dependencies between them. Methodology. The study was conducted by an analytical method assessing the sustainability of the freight car when driving at different speeds on the straight and curved track sections. Findings. In the process of studying the motion of the train, in the investigation of transport events, as well as during the training on the simulator operator, to assess the actions of the driver, the values of the longitudinal forces in the inter car connections are used. To calculate the longitudinal compressive forces, acting on the car, in which car lift resistance factor will be equal to the allowable value (critical force. To assess the impact on the value of the longitudinal force speed, coefficients of the vertical and horizontal dynamics, as well as the wind load on the side surface of the car body are the results of calculations of motion of the empty gondola car, model № 12-532 curve radius of 250 m with a rise of 150 mm and a transverse run of body of car frame relative to the track axis of the guide section 50 mm. Originality. In this study, the technique of determining the longitudinal compressive force was shown, that is somewhat different from the standard. So, as well as assessing the impact on it the speed of rolling coefficients of vertical and horizontal dynamics and wind load on the side surface of the car body. Practical value. The authors developed proposals on the enhancement of existing methods for determining the value of the longitudinal compressive forces acting on the car in which the safety value of the car lift resistance factor will be equal to the allowable value. It will evaluate the

The Danish patient safety experience: the Act on Patient Safety in the Danish Health care system

DEFF Research Database (Denmark)

Lundgaard, Mette; Rabøl, Louise; Jensen, Elisabeth Agnete Brøgger

2005-01-01

This paper describes the process that lead to the passing of the Act for Patient Safety in the Danisk health care sytem, the contents of the act and how the act is used in the Danish health care system. The act obligates frontline health care personnel to report adverse events, hospital owners...... to act on the reports and the National Board of Health to commuicate the learning nationally. The act protects health care providers from sanctions as a result of reporting. In January 2004, the Act on Patient Safety in the Danish health care system was put into force. In the first twelve months 5740...... adverse events were reported. the reports were analyzed locally (hospital and region), anonymized ad then sent to the National Board af Health. The Act on Patient Safety has driven the work with patient safety forward but there is room for improvement. Continuous and improved feedback from all parts...

Positive Selection on Loci Associated with Drug and Alcohol Dependence.

Directory of Open Access Journals (Sweden)

Brooke Sadler

Full Text Available Much of the evolution of human behavior remains a mystery, including how certain disadvantageous behaviors are so prevalent. Nicotine addiction is one such phenotype. Several loci have been implicated in nicotine related phenotypes including the nicotinic receptor gene clusters (CHRNs on chromosomes 8 and 15. Here we use 1000 Genomes sequence data from 3 populations (Africans, Asians and Europeans to examine whether natural selection has occurred at these loci. We used Tajima's D and the integrated haplotype score (iHS to test for evidence of natural selection. Our results provide evidence for strong selection in the nicotinic receptor gene cluster on chromosome 8, previously found to be significantly associated with both nicotine and cocaine dependence, as well as evidence selection acting on the region containing the CHRNA5 nicotinic receptor gene on chromosome 15, that is genome wide significant for risk for nicotine dependence. To examine the possibility that this selection is related to memory and learning, we utilized genetic data from the Collaborative Studies on the Genetics of Alcoholism (COGA to test variants within these regions with three tests of memory and learning, the Wechsler Adult Intelligence Scale (WAIS Block Design, WAIS Digit Symbol and WAIS Information tests. Of the 17 SNPs genotyped in COGA in this region, we find one significantly associated with WAIS digit symbol test results. This test captures aspects of reaction time and memory, suggesting that a phenotype relating to memory and learning may have been the driving force behind selection at these loci. This study could begin to explain why these seemingly deleterious SNPs are present at their current frequencies.

Electronic zero-point fluctuation forces inside circuit components

Science.gov (United States)

Leonhardt, Ulf

2018-01-01

One of the most intriguing manifestations of quantum zero-point fluctuations are the van der Waals and Casimir forces, often associated with vacuum fluctuations of the electromagnetic field. We study generalized fluctuation potentials acting on internal degrees of freedom of components in electrical circuits. These electronic Casimir-like potentials are induced by the zero-point current fluctuations of any general conductive circuit. For realistic examples of an electromechanical capacitor and a superconducting qubit, our results reveal the possibility of tunable forces between the capacitor plates, or the level shifts of the qubit, respectively. Our analysis suggests an alternative route toward the exploration of Casimir-like fluctuation potentials, namely, by characterizing and measuring them as a function of parameters of the environment. These tunable potentials may be useful for future nanoelectromechanical and quantum technologies. PMID:29719863

Electronic zero-point fluctuation forces inside circuit components.

Science.gov (United States)

Shahmoon, Ephraim; Leonhardt, Ulf

2018-04-01

One of the most intriguing manifestations of quantum zero-point fluctuations are the van der Waals and Casimir forces, often associated with vacuum fluctuations of the electromagnetic field. We study generalized fluctuation potentials acting on internal degrees of freedom of components in electrical circuits. These electronic Casimir-like potentials are induced by the zero-point current fluctuations of any general conductive circuit. For realistic examples of an electromechanical capacitor and a superconducting qubit, our results reveal the possibility of tunable forces between the capacitor plates, or the level shifts of the qubit, respectively. Our analysis suggests an alternative route toward the exploration of Casimir-like fluctuation potentials, namely, by characterizing and measuring them as a function of parameters of the environment. These tunable potentials may be useful for future nanoelectromechanical and quantum technologies.

Semiclassical force for electroweak baryogenesis three-dimensional derivation

CERN Document Server

Kainulainen, K; Schmidt, M G; Weinstock, S; Kainulainen, Kimmo; Prokopec, Tomislav; Schmidt, Michael G.; Weinstock, Steffen

2002-01-01

We derive a semiclassical transport equation for fermions propagating in the presence of a CP-violating planar bubble wall at a first order electroweak phase transition. Starting from the Kadanoff-Baym (KB) equation for the two-point (Wightman) function we perform an expansion in gradients, or equivalently in the Planck constant h-bar. We show that to first order in h-bar the KB equations have a spectral solution, which allows for an on-shell description of the plasma excitations. The CP-violating force acting on these excitations is found to be enhanced by a boost factor in comparison with the 1+1-dimensional case studied in a former paper. We find that an identical semiclassical force can be obtained by the WKB method. Applications to the MSSM are also mentioned.

Approximate Method of Calculating Forces on Rudder During Ship Sailing on a Shipping Route

Directory of Open Access Journals (Sweden)

K. Zelazny

2014-09-01

Full Text Available Service speed of a ship in real weather conditions is a basic design parameter. Forecasting of this speed at preliminary design stage is made difficult by the lack of simple but at the same accurate models of forces acting upon a ship sailing on a preset shipping route. The article presents a model for calculating forces and moment on plane rudder, useful for forecasting of ship service speed at preliminary stages of ship design.

Bilateral ground reaction forces and joint moments for lateral sidestepping and crossover stepping tasks

Science.gov (United States)

Kuntze, Gregor; Sellers, William I.; Mansfield, Neil

2009-01-01

Racquet sports have high levels of joint injuries suggesting the joint loads during play may be excessive. Sports such as badminton employ lateral sidestepping (SS) and crossover stepping (XS) movements which so far have not been described in terms of biomechanics. This study examined bilateral ground reaction forces and three dimensional joint kinetics for both these gaits in order to determine the demands of the movements on the leading and trailing limb and predict the contribution of these movements to the occurrence of overuse injury of the lower limbs. A force platform and motion-analysis system were used to record ground reaction forces and track marker trajectories of 9 experienced male badminton players performing lateral SS, XS and forward running tasks at a controlled speed of 3 m·s-1 using their normal technique. Ground reaction force and kinetic data for the hip, knee and ankle were analyzed, averaged across the group and the biomechanical variables compared. In all cases the ground reaction forces and joint moments were less than those experienced during moderate running suggesting that in normal play SS and XS gaits do not lead to high forces that could contribute to increased injury risk. Ground reaction forces during SS and XS do not appear to contribute to the development of overuse injury. The distinct roles of the leading and trailing limb, acting as a generator of vertical force and shock absorber respectively, during the SS and XS may however contribute to the development of muscular imbalances which may ultimately contribute to the development of overuse injury. However it is still possible that faulty use of these gaits might lead to high loads and this should be the subject of future work. Key pointsGround reaction forces and joint moments during lateral stepping are smaller in magnitude than those experienced during moderate running.Force exposure in SS and XS gaits in normal play does not appear to contribute to the development of

Apparent directional selection by biased pleiotropic mutation.

Science.gov (United States)

Tanaka, Yoshinari

2010-07-01

Pleiotropic effects of deleterious mutations are considered to be among the factors responsible for genetic constraints on evolution by long-term directional selection acting on a quantitative trait. If pleiotropic phenotypic effects are biased in a particular direction, mutations generate apparent directional selection, which refers to the covariance between fitness and the trait owing to a linear association between the number of mutations possessed by individuals and the genotypic values of the trait. The present analysis has shown how the equilibrium mean value of the trait is determined by a balance between directional selection and biased pleiotropic mutations. Assuming that genes act additively both on the trait and on fitness, the total variance-standardized directional selection gradient was decomposed into apparent and true components. Experimental data on mutation bias from the bristle traits of Drosophila and life history traits of Daphnia suggest that apparent selection explains a small but significant fraction of directional selection pressure that is observed in nature; the data suggest that changes induced in a trait by biased pleiotropic mutation (i.e., by apparent directional selection) are easily compensated for by (true) directional selection.

Act of 18 March 1983 on Nuclear Third Party Liability (LRCN)

International Nuclear Information System (INIS)

1983-01-01

This new Act on nuclear third party liability maintains the two essential principles established by the law in force, namely those of causation and the channelling of liability on to the operator of a nuclear installation. On the other hand, the Act waives the principle of third party liability limited in amount and provides that the person liable must commit himself for an unlimited amount. Such liability is covered as follows: by private insurance up to 300 million francs; by the Confederation up to one thousand million francs over and above the amount covered by private insurance; by all the assets of the person liable. (NEA) [fr

Act of 25 February 1976 amending amounts and limits of the Civil Law

International Nuclear Information System (INIS)

1976-01-01

The Federal Act of 29 April 1964 on nuclear third party liability was modified by Section XXXIII of the Federal Act of 25 February 1976 amending amounts and limits fixed by the Civil Law. This modification came into force on 1 April 1976. For operators of nuclear installations and carriers the ceiling is now 500 million Austrian schillings. For radioisotope holders, the maximum amount depends on the radioactivity and the radiotoxicity of the isotope involved. The present ceiling ranges from 1.2 to 18 million schillings. (NEA) [fr

Returning home: forced conscription, reintegration, and mental health status of former abductees of the Lord's Resistance Army in northern Uganda

Science.gov (United States)

Pham, Phuong N; Vinck, Patrick; Stover, Eric

2009-01-01

Background Since the late 1980s, the Lord's Resistance Army (LRA), a spiritualist rebel group in northern Uganda, has killed and mutilated thousands of civilians and abducted an estimated 52,000 to 75,000 people to serve as soldiers, porters, and sex slaves for its commanders. This study examines the types of violence to which former abductees have been exposed and the extent to which these acts have affected their psychological well-being. Methods This is a cross-sectional study of 2,875 individuals selected through a multi-stage stratified cluster sampling design conducted in 8 districts of northern Uganda. Multivariate logistic regressions were performed with symptoms for Post-traumatic Stress Disorder (PTSD) and depression as the main outcome measures. Results One-third of the respondents (33%) self-reported having experienced abduction (49% among the Acholi, the largest tribal group in northern Uganda). Over half (56%) of all the respondents and over two-thirds of those who experienced abduction met the criteria for symptoms of post-traumatic stress disorder (PTSD). Multivariate analysis shows that several factors increased the risk of former LRA abductees developing symptoms of PTSD. These factors included gender (females were more susceptible than males), being a member of the Acholi ethnic group, participating in or witnessing a cumulative number of traumatic events, and encountering difficulties re-integrating into communities after abduction. Factors associated with increased risk of meeting criteria for symptoms of depression included older age of males at the time of abduction, lower score on social relationship scale, high incidence of general traumatic event exposure, high incidence of forced acts of violence, and problems reintegrating into communities after abduction. Conclusion Abduction and forced conscription of civilians has affected the psychological well-being of a significant number of northern Ugandans. The sources of psychological trauma

Returning home: forced conscription, reintegration, and mental health status of former abductees of the Lord's Resistance Army in northern Uganda

Directory of Open Access Journals (Sweden)

Vinck Patrick

2009-05-01

Full Text Available Abstract Background Since the late 1980s, the Lord's Resistance Army (LRA, a spiritualist rebel group in northern Uganda, has killed and mutilated thousands of civilians and abducted an estimated 52,000 to 75,000 people to serve as soldiers, porters, and sex slaves for its commanders. This study examines the types of violence to which former abductees have been exposed and the extent to which these acts have affected their psychological well-being. Methods This is a cross-sectional study of 2,875 individuals selected through a multi-stage stratified cluster sampling design conducted in 8 districts of northern Uganda. Multivariate logistic regressions were performed with symptoms for Post-traumatic Stress Disorder (PTSD and depression as the main outcome measures. Results One-third of the respondents (33% self-reported having experienced abduction (49% among the Acholi, the largest tribal group in northern Uganda. Over half (56% of all the respondents and over two-thirds of those who experienced abduction met the criteria for symptoms of post-traumatic stress disorder (PTSD. Multivariate analysis shows that several factors increased the risk of former LRA abductees developing symptoms of PTSD. These factors included gender (females were more susceptible than males, being a member of the Acholi ethnic group, participating in or witnessing a cumulative number of traumatic events, and encountering difficulties re-integrating into communities after abduction. Factors associated with increased risk of meeting criteria for symptoms of depression included older age of males at the time of abduction, lower score on social relationship scale, high incidence of general traumatic event exposure, high incidence of forced acts of violence, and problems reintegrating into communities after abduction. Conclusion Abduction and forced conscription of civilians has affected the psychological well-being of a significant number of northern Ugandans. The sources of

Effect of the repulsive force in the HTSC-permanent magnet hybrid bearing system

International Nuclear Information System (INIS)

Ohashi, S.; Kobayashi, S.

2009-01-01

Magnetic levitation using the pinning force of the YBaCuO high-T c bulk superconductor (HTSC) materials has an advantage to achieve stable levitation without control. To increase levitation force, the HTSC-permanent magnet hybrid magnetic bearing system is introduced. A circular shaped three phase Nd-Fe-B permanent magnet is installed on the rotor, and HTSC bulk superconductor is set on the stator. The additional permanent magnet is installed under the HTSC. Repulsive force of the permanent magnet is used for levitation, and pinning force between the HTSC and permanent magnet is used for guidance force of the bearing. In this system, relationship between permanent magnet and the HTSC is important. When repulsive force of the permanent magnet is large, pinning force of superconductor is used to keep the rotor position. As a result, stability for the lateral direction is decreased with hybrid system. For levitation force, effect of the hybrid system is not observed with column HTSC. Compared with the ring HTSC results, the following thing is considered. Because there is no space that flux of one permanent magnet acts on the other one with the column HTSC configuration, interaction between two permanent magnets becomes small.

Quantum limited force measurement in a cavityless optomechanical system

International Nuclear Information System (INIS)

Fermani, Rachele; Mancini, Stefano; Tombesi, Paolo

2004-01-01

We study the possibility of revealing a weak coherent force by using a pendular mirror as a probe, and coupling this to a radiation field, which acts as the meter, in a cavityless configuration. We determine the sensitivity of such a scheme and show that the use of an entangled meter state greatly improves the ultimate detection limit. We also compare this scheme with that involving an optical cavity

Slovak Republic Act No. 124/2006 Coll. of 2 February 2006 on safety and health at work and amending some laws

International Nuclear Information System (INIS)

2006-01-01

This Act establishes the general principles of prevention and basic conditions for ensuring safety and health at work and to eliminate the risk factors and conditioning the occurrence of occupational accidents, occupational diseases and other health damage. This Act came into force on July 1, 2006.

Fast-acting valve actuator

Science.gov (United States)

Cho, Nakwon

1980-01-01

A fast-acting valve actuator utilizes a spring driven pneumatically loaded piston to drive a valve gate. Rapid exhaust of pressurized gas from the pneumatically loaded side of the piston facilitates an extremely rapid piston stroke. A flexible selector diaphragm opens and closes an exhaust port in response to pressure differentials created by energizing and de-energizing a solenoid which controls the pneumatic input to the actuator as well as selectively providing a venting action to one side of the selector diaphragm.

Scalable force directed graph layout algorithms using fast multipole methods

KAUST Repository

Yunis, Enas Abdulrahman

2012-06-01

We present an extension to ExaFMM, a Fast Multipole Method library, as a generalized approach for fast and scalable execution of the Force-Directed Graph Layout algorithm. The Force-Directed Graph Layout algorithm is a physics-based approach to graph layout that treats the vertices V as repelling charged particles with the edges E connecting them acting as springs. Traditionally, the amount of work required in applying the Force-Directed Graph Layout algorithm is O(|V|2 + |E|) using direct calculations and O(|V| log |V| + |E|) using truncation, filtering, and/or multi-level techniques. Correct application of the Fast Multipole Method allows us to maintain a lower complexity of O(|V| + |E|) while regaining most of the precision lost in other techniques. Solving layout problems for truly large graphs with millions of vertices still requires a scalable algorithm and implementation. We have been able to leverage the scalability and architectural adaptability of the ExaFMM library to create a Force-Directed Graph Layout implementation that runs efficiently on distributed multicore and multi-GPU architectures. © 2012 IEEE.

Pragmatics in EFL teaching: how speech acts are addressed in a Brazilian textbook series

Directory of Open Access Journals (Sweden)

Tavares, Paulo Ott

2014-01-01

Full Text Available This paper aims at discussing and analyzing the approach to speech acts in an EFL textbook series used in Brazilian public schools. In order to do that, the concepts of pragmatics and pragmatic competence, as well as their implications to foreign language (FL teaching, are discussed. Then, a brief review of the Speech Act Theory is presented. After describing the approach to FL teaching proposed by the PCNs and the selection of textbooks through the PNLD, we analyze one series, selected for the 2014-2016 triennium. The conclusion is that speech acts are not deeply approached, but that is in accordance with the goals of the series