47 CFR 1.1602 - Designation for random selection.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Designation for random selection. 1.1602 Section 1.1602 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Random Selection Procedures for Mass Media Services General Procedures § 1.1602 Designation for random selection...

Toward automated selective retina treatment (SRT): an optical microbubble detection technique

Science.gov (United States)

Seifert, Eric; Park, Young-Gun; Theisen-Kunde, Dirk; Roh, Young-Jung; Brinkmann, Ralf

2018-02-01

Selective retina therapy (SRT) is an ophthalmological laser technique, targeting the retinal pigment epithelium (RPE) with repetitive microsecond laser pulses, while causing no thermal damage to the neural retina, the photoreceptors as well as the choroid. The RPE cells get damaged mechanically by microbubbles originating, at the intracellular melanosomes. Beneficial effects of SRT on Central Serous Retinopathy (CSR) and Diabetic Macula Edema (DME) have already been shown. Variations in the transmission of the anterior eye media and pigmentation variation of RPE yield in intra- and inter- individual thresholds of the pulse energy required for selective RPE damage. Those selective RPE lesions are not visible. Thus, dosimetry-systems, designed to detect microbubbles as an indicator for RPE cell damage, are demanded elements to facilitate SRT application. Therefore, a technique based on the evaluation of backscattered treatment light has been developed. Data of 127 spots, acquired during 10 clinical treatments of CSR patients, were assigned to a RPE cell damage class, validated by fluorescence angiography (FLA). An algorithm has been designed to match the FLA based information. A sensitivity of 0.9 with a specificity close to 1 is achieved. The data can be processed within microseconds. Thus, the process can be implemented in existing SRT lasers with an automatic pulse wise increasing energy and an automatic irradiation ceasing ability to enable automated treatment close above threshold to prevent adverse effects caused by too high pulse energy. Alternatively, a guidance procedure, informing the treating clinician about the adequacy of the actual settings, is possible.

A decision tool for selecting trench cap designs

Energy Technology Data Exchange (ETDEWEB)

Paige, G.B.; Stone, J.J.; Lane, L.J. [USDA-ARS, Tucson, AZ (United States)] [and others

1995-12-31

A computer based prototype decision support system (PDSS) is being developed to assist the risk manager in selecting an appropriate trench cap design for waste disposal sites. The selection of the {open_quote}best{close_quote} design among feasible alternatives requires consideration of multiple and often conflicting objectives. The methodology used in the selection process consists of: selecting and parameterizing decision variables using data, simulation models, or expert opinion; selecting feasible trench cap design alternatives; ordering the decision variables and ranking the design alternatives. The decision model is based on multi-objective decision theory and uses a unique approach to order the decision variables and rank the design alternatives. Trench cap designs are evaluated based on federal regulations, hydrologic performance, cover stability and cost. Four trench cap designs, which were monitored for a four year period at Hill Air Force Base in Utah, are used to demonstrate the application of the PDSS and evaluate the results of the decision model. The results of the PDSS, using both data and simulations, illustrate the relative advantages of each of the cap designs and which cap is the {open_quotes}best{close_quotes} alternative for a given set of criteria and a particular importance order of those decision criteria.

Treating Youths with Selective Mutism with an Alternating Design of Exposure-Based Practice and Contingency Management

Science.gov (United States)

Vecchio, Jennifer; Kearney, Christopher A.

2009-01-01

Selective mutism is a severe childhood disorder involving failure to speak in public situations in which speaking is expected. The present study examined 9 youths with selective mutism treated with child-focused, exposure-based practices and parent-focused contingency management via an alternating treatments design. Broadband measures of…

Screened selection design for randomised phase II oncology trials: an example in chronic lymphocytic leukaemia.

Science.gov (United States)

Yap, Christina; Pettitt, Andrew; Billingham, Lucinda

2013-07-03

As there are limited patients for chronic lymphocytic leukaemia trials, it is important that statistical methodologies in Phase II efficiently select regimens for subsequent evaluation in larger-scale Phase III trials. We propose the screened selection design (SSD), which is a practical multi-stage, randomised Phase II design for two experimental arms. Activity is first evaluated by applying Simon's two-stage design (1989) on each arm. If both are active, the play-the-winner selection strategy proposed by Simon, Wittes and Ellenberg (SWE) (1985) is applied to select the superior arm. A variant of the design, Modified SSD, also allows the arm with the higher response rates to be recommended only if its activity rate is greater by a clinically-relevant value. The operating characteristics are explored via a simulation study and compared to a Bayesian Selection approach. Simulations showed that with the proposed SSD, it is possible to retain the sample size as required in SWE and obtain similar probabilities of selecting the correct superior arm of at least 90%; with the additional attractive benefit of reducing the probability of selecting ineffective arms. This approach is comparable to a Bayesian Selection Strategy. The Modified SSD performs substantially better than the other designs in selecting neither arm if the underlying rates for both arms are desirable but equivalent, allowing for other factors to be considered in the decision making process. Though its probability of correctly selecting a superior arm might be reduced, it still performs reasonably well. It also reduces the probability of selecting an inferior arm. SSD provides an easy to implement randomised Phase II design that selects the most promising treatment that has shown sufficient evidence of activity, with available R codes to evaluate its operating characteristics.

Treatment selection in a randomized clinical trial via covariate-specific treatment effect curves.

Science.gov (United States)

Ma, Yunbei; Zhou, Xiao-Hua

2017-02-01

For time-to-event data in a randomized clinical trial, we proposed two new methods for selecting an optimal treatment for a patient based on the covariate-specific treatment effect curve, which is used to represent the clinical utility of a predictive biomarker. To select an optimal treatment for a patient with a specific biomarker value, we proposed pointwise confidence intervals for each covariate-specific treatment effect curve and the difference between covariate-specific treatment effect curves of two treatments. Furthermore, to select an optimal treatment for a future biomarker-defined subpopulation of patients, we proposed confidence bands for each covariate-specific treatment effect curve and the difference between each pair of covariate-specific treatment effect curve over a fixed interval of biomarker values. We constructed the confidence bands based on a resampling technique. We also conducted simulation studies to evaluate finite-sample properties of the proposed estimation methods. Finally, we illustrated the application of the proposed method in a real-world data set.

Selection of medical treatment in stable angina pectoris

DEFF Research Database (Denmark)

Ardissino, D; Savonitto, S; Egstrup, K

1995-01-01

pectoris. BACKGROUND: The characteristics of anginal symptoms and the results of exercise testing are considered of great importance for selecting medical treatment in patients with chronic stable angina pectoris. However, little information is available on how this first evaluation may be used to select....... CONCLUSIONS: The results of a baseline exercise test, but not the characteristics of anginal symptoms, may offer useful information for selecting medical treatment in stable angina pectoris....

Computer Aided Solvent Selection and Design Framework

DEFF Research Database (Denmark)

Mitrofanov, Igor; Conte, Elisa; Abildskov, Jens

and computer-aided tools and methods for property prediction and computer-aided molecular design (CAMD) principles. This framework is applicable for solvent selection and design in product design as well as process design. The first module of the framework is dedicated to the solvent selection and design...... in terms of: physical and chemical properties (solvent-pure properties); Environment, Health and Safety (EHS) characteristic (solvent-EHS properties); operational properties (solvent–solute properties). 3. Performing the search. The search step consists of two stages. The first is a generation and property...... identification of solvent candidates using special software ProCAMD and ProPred, which are the implementations of computer-aided molecular techniques. The second consists of assigning the RS-indices following the reaction–solvent and then consulting the known solvent database and identifying the set of solvents...

Selective embolization in the treatment of intractable epistaxis

DEFF Research Database (Denmark)

Andersen, Pia Juul; Kjeldsen, Anette Drøhse; Nepper-Rasmussen, Jørgen

2005-01-01

: This was a retrospective review. Post-treatment effects and complications were evaluated by means of a questionnaire and a telephone interview. Owing to the different treatment strategies used, the results were evaluated for 2 groups of patients: Group A, 9 patients with HHT; and Group B, 13 patients with causes...... the bleeding may present difficulties. Several methods are used to control posterior epistaxis, one of the latest treatment strategies being selective embolization of the nasal arteries. The aim of this study was to describe the effect of selective embolization in 22 patients treated with a total of 30...... procedures at the ENT Department of Odense University Hospital between January 1995 and March 2004. To our knowledge this is the first Nordic work in which selective embolization has been used as a treatment strategy for patients with hereditary hemorrhagic telangiectasia (HHT). MATERIAL AND METHODS...

Structural Biology Insight for the Design of Sub-type Selective Aurora Kinase Inhibitors.

Science.gov (United States)

Sarvagalla, Sailu; Coumar, Mohane Selvaraj

2015-01-01

Aurora kinase A, B and C, are key regulators of mitosis and are over expressed in many of the human cancers, making them an ideal drug target for cancer chemotherapy. Currently, over a dozen of Aurora kinase inhibitors are in various phases of clinical development. The majority of the inhibitors (VX-680/MK-0457, PHA-739358, CYC116, SNS-314, AMG 900, AT-9283, SCH- 1473759, ABT-348, PF-03814735, R-763/AS-703569, KW-2449 and TAK-901) are pan-selective (isoform non-selective) and few are Aurora A (MLN8054, MLN8237, VX-689/MK5108 and ENMD 2076) and Aurora B (AZD1152 and GSK1070916) sub-type selective. Despite the intensive research efforts in the past decade, no Aurora kinase inhibitor has reached the market. Recent evidence suggests that the sub-type selective Aurora kinase A inhibitor could possess advantages over pan-selective Aurora inhibitors, by avoiding Aurora B mediated neutropenia. However, sub-type selective Aurora kinase A inhibitor design is very challenging due to the similarity in the active site among the isoforms. Structural biology and computational aspects pertaining to the design of Aurora kinase inhibitors were analyzed and found that a possible means to develop sub-type selective inhibitor is by targeting Aurora A specific residues (Leu215, Thr217 and Arg220) or Aurora B specific residues (Arg159, Glu161 and Lys164), near the solvent exposed region of the protein. Particularly, a useful strategy for the design of sub-type selective Aurora A inhibitor could be by targeting Thr217 residue as in the case of MLN8054. Further preclinical and clinical studies with the sub-type selective Aurora inhibitors could help bring them to the market for the treatment of cancer.

Optimal tariff design under consumer self-selection

Energy Technology Data Exchange (ETDEWEB)

Raesaenen, M.; Ruusunen, J.; Haemaelaeinen, R.

1995-12-31

This report considers the design of electricity tariffs which guides an individual consumer to select the tariff designed for his consumption pattern. In the model the utility maximizes the weighted sum of individual consumers` benefits of electricity consumption subject to the utility`s revenue requirement constraints. The consumers` free choice of tariffs is ensured with the so-called self-selection constraints. The relationship between the consumers` optimal choice of tariffs and the weights in the aggregated consumers` benefit function is analyzed. If such weights exist, they will guarantee both the consumers` optimal choice of tariffs and the efficient consumption patterns. Also the welfare effects are analyzed by using demand parameters estimated from a Finnish dynamic pricing experiment. The results indicate that it is possible to design an efficient tariff menu with the welfare losses caused by the self-selection constraints being small compared with the costs created when some consumers choose tariffs other than assigned for them. (author)

Basis for NGNP Reactor Design Down-Selection

Energy Technology Data Exchange (ETDEWEB)

L.E. Demick

2010-08-01

The purpose of this paper is to identify the extent of technology development, design and licensing maturity anticipated to be required to credibly identify differences that could make a technical choice practical between the prismatic and pebble bed reactor designs. This paper does not address a business decision based on the economics, business model and resulting business case since these will vary based on the reactor application. The selection of the type of reactor, the module ratings, the number of modules, the configuration of the balance of plant and other design selections will be made on the basis of optimizing the Business Case for the application. These are not decisions that can be made on a generic basis.

Optimization model for the design of distributed wastewater treatment networks

Directory of Open Access Journals (Sweden)

Ibrić Nidret

2012-01-01

Full Text Available In this paper we address the synthesis problem of distributed wastewater networks using mathematical programming approach based on the superstructure optimization. We present a generalized superstructure and optimization model for the design of the distributed wastewater treatment networks. The superstructure includes splitters, treatment units, mixers, with all feasible interconnections including water recirculation. Based on the superstructure the optimization model is presented. The optimization model is given as a nonlinear programming (NLP problem where the objective function can be defined to minimize the total amount of wastewater treated in treatment operations or to minimize the total treatment costs. The NLP model is extended to a mixed integer nonlinear programming (MINLP problem where binary variables are used for the selection of the wastewater treatment technologies. The bounds for all flowrates and concentrations in the wastewater network are specified as general equations. The proposed models are solved using the global optimization solvers (BARON and LINDOGlobal. The application of the proposed models is illustrated on the two wastewater network problems of different complexity. First one is formulated as the NLP and the second one as the MINLP. For the second one the parametric and structural optimization is performed at the same time where optimal flowrates, concentrations as well as optimal technologies for the wastewater treatment are selected. Using the proposed model both problems are solved to global optimality.

Evaluation of wetlands designed to transfer and transform selected metals in an aqueous matrix

International Nuclear Information System (INIS)

Hawkins, W.B.; Gillespie, W.B. Jr.; Rodgers, J.H. Jr.

1995-01-01

Constructed wetlands can be used as an alternative to traditional wastewater treatment. Two wetlands were constructed at a Louisiana petroleum refinery and were used to study transfers and transformations of selected metals (Zn, Pb, and Cu) in a refinery effluent. In order to optimize metal removal from the aqueous matrix and subsequently decrease metal bioavailability, the hydroperiod, hydrosoil, and vegetation were specifically selected and incorporated into the wetland design. To test the metal removal efficiency of the constructed wetlands, refinery effluent was amended with 4 mg Zn/L as ZnCl 2 for 150 d. From influent to effluent, average total recoverable and soluble zinc concentrations decreased by 41 and 72%, respectively. Toxicity tests (7 d) using Ceriodaphnia dubia and Pimephales promelas illustrated a decrease in zinc bioavailability. Average C. dubia survival increased from 0--73% as a result of wetland treatment; for P. promelas, the increase in average survival was 37--94%. Based upon this field experiment, constructed wetlands can be specifically designed for zinc removal and concomitant decreases in toxicity

Flame treatment for the selective wetting and separation of PVC and PET.

Science.gov (United States)

Pascoe, R D; O'Connell, B

2003-01-01

Flame treatment has been used for many years to modify the surface of plastics to allow coatings to be added. The effect of the treatment is to produce hydrophilic species on the surface of the plastic making it water-wettable. The production of hydrophilic plastic surfaces is also required in the selective separation of plastics by froth flotation. For the process to be selective one plastic must be rendered hydrophilic while another remains hydrophobic. In this study the potential for separation of PVC and PET has been investigated. Flame treatment was shown to be very effective in producing a hydrophilic surface on both plastics, although the process was not selective under the conditions investigated. Raising the temperature of the plastics above their softening point produced a hydrophobic recovery. As the softening point of PVC was significantly lower than for PET it was possible to produce a significant difference in hydrophobicity, as judged using contact angle measurement. When immersed in water the contact angle of the PVC was found to be strongly dependent on the pH. Good separation efficiency of the two plastics was achieved by froth flotation from pH 4 to 9. One particular advantage of the technique is that no chemical reagents may be required in the flotation stage. The practicalities of designing a flake treatment system however have to be addressed before considering it to be a viable industrial process.

Flame treatment for the selective wetting and separation of PVC and PET

International Nuclear Information System (INIS)

Pascoe, R.D.; O'Connell, B.

2003-01-01

Flame treatment has been used for many years to modify the surface of plastics to allow coatings to be added. The effect of the treatment is to produce hydrophilic species on the surface of the plastic making it water-wettable. The production of hydrophilic plastic surfaces is also required in the selective separation of plastics by froth flotation. For the process to be selective one plastic must be rendered hydrophilic while another remains hydrophobic. In this study the potential for separation of PVC and PET has been investigated. Flame treatment was shown to be very effective in producing a hydrophilic surface on both plastics, although the process was not selective under the conditions investigated. Raising the temperature of the plastics above their softening point produced a hydrophobic recovery. As the softening point of PVC was significantly lower than for PET it was possible to produce a significant difference in hydrophobicity, as judged using contact angle measurement. When immersed in water the contact angle of the PVC was found to be strongly dependent on the pH. Good separation efficiency of the two plastics was achieved by froth flotation from pH 4 to 9. One particular advantage of the technique is that no chemical reagents may be required in the flotation stage. The practicalities of designing a flake treatment system however have to be addressed before considering it to be a viable industrial process

Defining New Parameters for Green Engineering Design of Treatment Reactors

Directory of Open Access Journals (Sweden)

Susana Boeykens

2016-06-01

Full Text Available This study proposes a green way to design Plug Flow Reactors (PFR that use biodegradable polymer solutions, capable of contaminant retaining, for industrial wastewater treatment. Usually, to the design of a PFR, the reaction rate is determined by tests on a Continuous Stirred-Tank Reactor (CSTR, these generate toxic effluents and also increase the cost of the design. In this work, empirical expressions (called “slip functions”, in terms of the average concentration of the contaminant, were developed through the study of the transport behaviour of CrVI into solutions of xanthan gum. “In situ” XRµF was selected as a no-invasive micro-technique to determine local concentrations. Slip functions were used with laboratory PFR experiments planned in similar conditions, to obtain useful dimensionless parameters for the industrial design. 

SEISMIC DESIGN REQUIREMENTS SELECTION METHODOLOGY FOR THE SLUDGE TREATMENT and M-91 SOLID WASTE PROCESSING FACILITIES PROJECTS

International Nuclear Information System (INIS)

RYAN GW

2008-01-01

In complying with direction from the U.S. Department of Energy (DOE), Richland Operations Office (RL) (07-KBC-0055, 'Direction Associated with Implementation of DOE-STD-1189 for the Sludge Treatment Project,' and 08-SED-0063, 'RL Action on the Safety Design Strategy (SDS) for Obtaining Additional Solid Waste Processing Capabilities (M-91 Project) and Use of Draft DOE-STD-I 189-YR'), it has been determined that the seismic design requirements currently in the Project Hanford Management Contract (PHMC) will be modified by DOE-STD-1189, Integration of Safety into the Design Process (March 2007 draft), for these two key PHMC projects. Seismic design requirements for other PHMC facilities and projects will remain unchanged. Considering the current early Critical Decision (CD) phases of both the Sludge Treatment Project (STP) and the Solid Waste Processing Facilities (M-91) Project and a strong intent to avoid potentially costly re-work of both engineering and nuclear safety analyses, this document describes how Fluor Hanford, Inc. (FH) will maintain compliance with the PHMC by considering both the current seismic standards referenced by DOE 0 420.1 B, Facility Safety, and draft DOE-STD-1189 (i.e., ASCE/SEI 43-05, Seismic Design Criteria for Structures, Systems, and Components in Nuclear Facilities, and ANSI ANS 2.26-2004, Categorization of Nuclear Facility Structures, Systems and Components for Seismic Design, as modified by draft DOE-STD-1189) to choose the criteria that will result in the most conservative seismic design categorization and engineering design. Following the process described in this document will result in a conservative seismic design categorization and design products. This approach is expected to resolve discrepancies between the existing and new requirements and reduce the risk that project designs and analyses will require revision when the draft DOE-STD-1189 is finalized

The efficiency of subset selection of an almost best treatment

NARCIS (Netherlands)

Laan, van der P.

1991-01-01

A generalized goal using subset selection is discussed for the location parameter case. This goal is to select a non-empty subset from a set of k (k \\geq 2) treatments that contains at least one \\epsilon-best treatment with confidence level P*. For a set of treatments an \\epsilon-best treatment is

Optimum Tower Crane Selection and Supporting Design Management

Directory of Open Access Journals (Sweden)

Hyo Won Sohn

2014-08-01

Full Text Available To optimize tower crane selection and supporting design, lifting requirements (as well as stability should be examined, followed by a review of economic feasibility. However, construction engineers establish plans based on data provided by equipment suppliers since there are no tools with which to thoroughly examine a support design's suitability for various crane types, and such plans lack the necessary supporting data. In such cases it is impossible to optimize a tower crane selection to satisfy lifting requirements in terms of cost, and to perform lateral support and foundation design. Thus, this study is intended to develop an optimum tower crane selection and supporting design management method based on stability. All cases that are capable of generating an optimization of approximately 3,000 ˜ 15,000 times are calculated to identify the candidate cranes with minimized cost, which are examined. The optimization method developed in the study is expected to support engineers in determining the optimum lifting equipment management.

Design and in vivo evaluation of more efficient and selective deep brain stimulation electrodes

Science.gov (United States)

Howell, Bryan; Huynh, Brian; Grill, Warren M.

2015-08-01

Objective. Deep brain stimulation (DBS) is an effective treatment for movement disorders and a promising therapy for treating epilepsy and psychiatric disorders. Despite its clinical success, the efficiency and selectivity of DBS can be improved. Our objective was to design electrode geometries that increased the efficiency and selectivity of DBS. Approach. We coupled computational models of electrodes in brain tissue with cable models of axons of passage (AOPs), terminating axons (TAs), and local neurons (LNs); we used engineering optimization to design electrodes for stimulating these neural elements; and the model predictions were tested in vivo. Main results. Compared with the standard electrode used in the Medtronic Model 3387 and 3389 arrays, model-optimized electrodes consumed 45-84% less power. Similar gains in selectivity were evident with the optimized electrodes: 50% of parallel AOPs could be activated while reducing activation of perpendicular AOPs from 44 to 48% with the standard electrode to 0-14% with bipolar designs; 50% of perpendicular AOPs could be activated while reducing activation of parallel AOPs from 53 to 55% with the standard electrode to 1-5% with an array of cathodes; and, 50% of TAs could be activated while reducing activation of AOPs from 43 to 100% with the standard electrode to 2-15% with a distal anode. In vivo, both the geometry and polarity of the electrode had a profound impact on the efficiency and selectivity of stimulation. Significance. Model-based design is a powerful tool that can be used to improve the efficiency and selectivity of DBS electrodes.

Wastewater sludge treatment at selected wastewater treatment plants of the region Banska Bystrica

International Nuclear Information System (INIS)

Samesova, D.; Mitterpach, J.; Martinkova, A.

2014-01-01

The management of sewage sludges in water treatment plants of Banska Bystrica region. The paper deals with the problems of sewage sludge in wastewater treatment plants, its origin and possibilities how to use it in accordance with the current legislation of the Slovak Republic. We described radioactive pollution of sewage sludges. The paper consists of review of sludge production and its usage in the Slovak Republic and in selected states of the European Union. The paper deals with the sludge treatment in selected wastewater treatment plants in Banska Bystrica region in the context of biogas production and its usage by the help of the electricity and heat production. (authors)

New detection systems of bacteria using highly selective media designed by SMART: selective medium-design algorithm restricted by two constraints.

Directory of Open Access Journals (Sweden)

Takeshi Kawanishi

Full Text Available Culturing is an indispensable technique in microbiological research, and culturing with selective media has played a crucial role in the detection of pathogenic microorganisms and the isolation of commercially useful microorganisms from environmental samples. Although numerous selective media have been developed in empirical studies, unintended microorganisms often grow on such media probably due to the enormous numbers of microorganisms in the environment. Here, we present a novel strategy for designing highly selective media based on two selective agents, a carbon source and antimicrobials. We named our strategy SMART for highly Selective Medium-design Algorithm Restricted by Two constraints. To test whether the SMART method is applicable to a wide range of microorganisms, we developed selective media for Burkholderia glumae, Acidovorax avenae, Pectobacterium carotovorum, Ralstonia solanacearum, and Xanthomonas campestris. The series of media developed by SMART specifically allowed growth of the targeted bacteria. Because these selective media exhibited high specificity for growth of the target bacteria compared to established selective media, we applied three notable detection technologies: paper-based, flow cytometry-based, and color change-based detection systems for target bacteria species. SMART facilitates not only the development of novel techniques for detecting specific bacteria, but also our understanding of the ecology and epidemiology of the targeted bacteria.

Supernatant treatment system design through testing

International Nuclear Information System (INIS)

Ploetz, D.K.; Leonard, I.M.

1988-12-01

The main purpose of the Supernatant Treatment System (STS) is to remove more than 99.9 percent of the radioactive cesium (Cs-137) from the high-level waste stored in tank 8D-2. Cesium removal is accomplished in the STS by processing the supernatant (liquid) portion of the high-level waste through three or four ion exchange columns filled with zeolite. After treatment in the STS, the decontaminated supernatant is processed as low-level waste and finally encapsulated in cement for eventual disposal. The Cs-137 removed from the waste and absorbed onto zeolite ion exchange material is temporarily stored in tank 8D-1 until it can be encapsulated in glass and disposed of as high-level waste. This report discusses construction and testing of the STS. Design of the STS was started in 1982 in parallel with the selection of the ion exchange material. The construction of this system was accomplished in five phase in parallel with completion of design to allow for faster completion of the project. The existing high-level waste storage tanks -- 8D-1, 8D-2, and 8D-3 -- required major renovations to permit transfer of the high-level waste from tank 8D-2 to tank 8D-1, to house the components that comprise the STS in tank 8D-1, and to store decontaminated wastes in tank 8D-3. Testing in the STS started before construction was complete and was accomplished by first testing components individually. Then the system was retested using simulated supernatant. Integrated testing of the whole Integrated Radwaste Treatment System (IRTS), which includes the STS, Liquid Waste Treatment System (LWTS), Cement Solidification System (CSS), and the Drum Cell, was also performed using simulated supernatant. Finally, slightly radioactive condensate water from tank 8D-1 was processed. After successfully completing this testing, the STS started operations with radioactive supernatant on May 23, 1988. 21 refs., 33 figs., 21 tabs

Waste treatment by selective mineral ion exchanger

International Nuclear Information System (INIS)

Polito, Aurelie

2007-01-01

STMI, subsidiary company of the AREVA Group with over 40 years in the D and D business, has been continuously innovating and developing new decontamination techniques, with the objectives of achieving more efficient decontaminations on a growing spectrum of media. In the field of liquid waste treatment, STMI manufactures uses and commercialises selective inorganic ion exchangers (RAN). These are hydrated synthetic inorganic compounds prepared from very pure raw materials. Different types of RANs (POLYAN, OXTAIN, Fe-Cu, Fe-CoK, Si-Fe-CoK) can be used to trap a large number of radioactive elements in contaminated effluents. Different implementations could be applied depending on technical conditions. STMI's offers consist in building global solution and preliminary design of installation either in dispersed form (batch) or in column (cartridge filtration). Those products are used all over the world not only in the nuclear business (Canada, US, Belgium, France...) but also in other fields. Indeed, it provides competitive solutions to many domains of application especially water pollution control, liquid waste treatment in the nuclear business by decreasing the activity level of waste. The following paper will focus on the theoretical principle of the mineral exchanger, its implementation and the feed back collected by STMI. (author)

Threat-related selective attention predicts treatment success in childhood anxiety disorders.

Science.gov (United States)

Legerstee, Jeroen S; Tulen, Joke H M; Kallen, Victor L; Dieleman, Gwen C; Treffers, Philip D A; Verhulst, Frank C; Utens, Elisabeth M W J

2009-02-01

The present study examined whether threat-related selective attention was predictive of treatment success in children with anxiety disorders and whether age moderated this association. Specific components of selective attention were examined in treatment responders and nonresponders. Participants consisted of 131 children with anxiety disorders (aged 8-16 years), who received standardized cognitive-behavioral therapy. At pretreatment, a pictorial dot-probe task was administered to assess selective attention. Both at pretreatment and posttreatment, diagnostic status of the children was evaluated with a semistructured clinical interview (the Anxiety Disorders Interview Schedule for Children). Selective attention for severely threatening pictures at pretreatment assessment was predictive of treatment success. Examination of the specific components of selective attention revealed that nonresponders showed difficulties to disengage their attention away from severe threat. Treatment responders showed a tendency not to engage their attention toward severe threat. Age was not associated with selective attention and treatment success. Threat-related selective attention is a significant predictor of treatment success in children with anxiety disorders. Clinically anxious children with difficulties disengaging their attention away from severe threat profit less from cognitive-behavioral therapy. For these children, additional training focused on learning to disengage attention away from anxiety-arousing stimuli may be beneficial.

Zoujiashan uranium waste water treatment optimizaiton design

International Nuclear Information System (INIS)

Huang Lianjun

2014-01-01

Optimization design follows the decontamination triage, comprehensive management, such as wastewater treatment principle and from easy to difficult. increasing the slurry treatment, optimization design containing ρ (U) > defines I mg/L wastewater for higher uranium concentration wastewater, whereas low uranium concentration wastewater. Through the optimization design, solve the problem of water turbidity 721-15 wastewater treatment station of the lack of capacity and mine. (author)

Selection of design basis event for modular high temperature gas-cooled reactor

International Nuclear Information System (INIS)

Sato, Hiroyuki; Nakagawa, Shigeaki; Ohashi, Hirofumi

2016-06-01

Japan Atomic Energy Agency (JAEA) has been investigating safety requirements and basic approach of safety guidelines for modular High Temperature Gas-cooled Reactor (HTGR) aiming to increase internarial contribution for nuclear safety by developing an international HTGR safety standard under International Atomic Energy Agency. In this study, we investigate a deterministic approach to select design basis events utilizing information obtained from probabilistic approach. In addition, selections of design basis events are conducted for commercial HTGR designed by JAEA. As a result, an approach for selecting design basis event considering multiple failures of safety systems is established which has not been considered as design basis in the safety guideline for existing nuclear facility. Furthermore, selection of design basis events for commercial HTGR has completed. This report provides an approach and procedure for selecting design basis events of modular HTGR as well as selected events for the commercial HTGR, GTHTR300. (author)

Some aspects of design and analysis of selection programmes in aquaculture species.

Science.gov (United States)

Li, Y; Ponzoni, R W

2015-04-01

The aquaculture industry is one of the fastest growing animal food-producing sectors in the world, largely driven by an increasing demand for high-quality protein from developing countries. However, the majority of cultured production of aquatic species currently relies heavily on the collection of wild animals for use as broodstock. Aquatic animal domestication and genetic selection programmes in controlled environments are essential to enable the provision of a continued supply of high-quality food for an ever-expanding world population. Professor John James' significant contributions to the genetic improvement of conventional livestock species are well known. By contrast, his contributions to the aquaculture industry are less well known, especially in the areas of design and conduct of selective breeding programmes in aquatic animal species. In this study, we focus on a few aspects of aquaculture genetics to which Professor James made substantial contributions. His outstanding ability to comprehend, clarify and simplify complex problems with easy-to-understand mathematical derivations is clearly demonstrated in the areas of large-scale strain comparisons, genotype-by-environment interactions (GxE), transformations and interpretation of selection response, as well as in the treatment of economic aspects of designing breeding programmes. © 2015 Blackwell Verlag GmbH.

Design and cost estimate for the SRL integrated hot off gas facility using selective adsorption

International Nuclear Information System (INIS)

Pence, D.T.; Kirstein, B.E.

1981-07-01

Based on the results of an engineering-scale demonstration program, a design and cost estimate were performed for a 25-m 3 /h (15-ft 3 /min) capacity pilot plant demonstration system using selective adsorption technology for installation at the Integrated Hot Off Gas Facility at the Savannah River Plant. The design includes provisions for the destruction of NO/sub x/ and the concentration and removal of radioisotopes of ruthenium, iodine-129, tritiated water vapor, carbon-14 contaminated carbon dioxide, and krypton-85. The nobel gases are separated by the use of selective adsorption on mordenite-type zeolites. The theory of noble gas adsorption on zeolites is essentially the same as that for the adsorption of noble gases on activated charcoals. Considerable detail is provided regarding the application of the theory to adsorbent bed designs and operation. The design is based on a comprehensive material balance and appropriate heat transfer calculations. Details are provided on techniques and procedures used for heating, cooling, and desorbing the adsorbent columns. Analyses are also given regarding component and arrangement selection and includes discussions on alternative arrangements. The estimated equipment costs for the described treatment system is about $1,400,000. The cost estimate includes a detailed equipment list of all the major component items in the design. Related technical issues and estimated system performance are also discussed

Design and cost estimate for the SRL integrated hot off gas facility using selective adsorption

Energy Technology Data Exchange (ETDEWEB)

Pence, D T; Kirstein, B E

1981-07-01

Based on the results of an engineering-scale demonstration program, a design and cost estimate were performed for a 25-m/sup 3//h (15-ft/sup 3//min) capacity pilot plant demonstration system using selective adsorption technology for installation at the Integrated Hot Off Gas Facility at the Savannah River Plant. The design includes provisions for the destruction of NO/sub x/ and the concentration and removal of radioisotopes of ruthenium, iodine-129, tritiated water vapor, carbon-14 contaminated carbon dioxide, and krypton-85. The nobel gases are separated by the use of selective adsorption on mordenite-type zeolites. The theory of noble gas adsorption on zeolites is essentially the same as that for the adsorption of noble gases on activated charcoals. Considerable detail is provided regarding the application of the theory to adsorbent bed designs and operation. The design is based on a comprehensive material balance and appropriate heat transfer calculations. Details are provided on techniques and procedures used for heating, cooling, and desorbing the adsorbent columns. Analyses are also given regarding component and arrangement selection and includes discussions on alternative arrangements. The estimated equipment costs for the described treatment system is about $1,400,000. The cost estimate includes a detailed equipment list of all the major component items in the design. Related technical issues and estimated system performance are also discussed.

Friction Surface Treatment Selection: Aggregate Properties, Surface Characteristics, Alternative Treatments, and Safety Effects

Science.gov (United States)

2017-07-01

This study aimed to evaluate the long term performance of the selected surface friction treatments, including high friction surface treatment (HFST) using calcined bauxite and steel slag, and conventional friction surfacing, in particular pavement pr...

Decision making tools for selecting sustainable wastewater treatment technologies in Thailand

Science.gov (United States)

Wongburi, Praewa; Park, Jae K.

2018-05-01

Wastewater consists of valuable resources that could be recovered or reused. Still it is under threat because of ineffective wastewater management and systems. In Thailand, less than 25% of wastewater generated may be treated while then rest is inadequately treated and sent back directly into waterbodies or the environment. Furthermore, the technologies that have been applied may be inefficient and unsustainable. Efficiency, sustainability, and simplicity are important concepts when designing an appropriate wastewater treatment system in developing countries. The objectives of this study were to review and evaluate wastewater treatment technologies and propose a method to improve or select an appropriate technology. An expert system in Excel® program was developed to determine the best solution. Sensitivity analysis was applied to compare and assess uncertainty factors. Due to the different conditions of each area, the key factor of interest was varied. Furthermore, Robust Decision Making tool was applied to determine the best way to improve existing wastewater treatment facility and to choose the most appropriate wastewater treatment technology.

Selective mutism: a review of etiology, comorbidities, and treatment.

Science.gov (United States)

Wong, Priscilla

2010-03-01

Selective mutism is a rare and multidimensional childhood disorder that typically affects children entering school age. It is characterized by the persistent failure to speak in select social settings despite possessing the ability to speak and speak comfortably in more familiar settings. Many theories attempt to explain the etiology of selective mutism.Comorbidities and treatment. Selective mutism can present a variety of comorbidities including enuresis, encopresis, obsessive-compulsive disorder, depression, premorbid speech and language abnormalities, developmental delay, and Asperger's disorders. The specific manifestations and severity of these comorbidities vary based on the individual. Given the multidimensional manifestations of selective mutism, treatment options are similarly diverse. They include individual behavioral therapy, family therapy, and psychotherapy with antidepressants and anti-anxiety medications.Future directions. While studies have helped to elucidate the phenomenology of selective mutism, limitations and gaps in knowledge still persist. In particular, the literature on selective mutism consists primarily of small sample populations and case reports. Future research aims to develop an increasingly integrated, multidimensional framework for evaluating and treating children with selective mutism.

Design and optimization of selective azaindole amide M1 positive allosteric modulators.

Science.gov (United States)

Davoren, Jennifer E; O'Neil, Steven V; Anderson, Dennis P; Brodney, Michael A; Chenard, Lois; Dlugolenski, Keith; Edgerton, Jeremy R; Green, Michael; Garnsey, Michelle; Grimwood, Sarah; Harris, Anthony R; Kauffman, Gregory W; LaChapelle, Erik; Lazzaro, John T; Lee, Che-Wah; Lotarski, Susan M; Nason, Deane M; Obach, R Scott; Reinhart, Veronica; Salomon-Ferrer, Romelia; Steyn, Stefanus J; Webb, Damien; Yan, Jiangli; Zhang, Lei

2016-01-15

Selective activation of the M1 receptor via a positive allosteric modulator (PAM) is a new approach for the treatment of the cognitive impairments associated with schizophrenia and Alzheimer's disease. A novel series of azaindole amides and their key pharmacophore elements are described. The nitrogen of the azaindole core is a key design element as it forms an intramolecular hydrogen bond with the amide N-H thus reinforcing the bioactive conformation predicted by published SAR and our homology model. Representative compound 25 is a potent and selective M1 PAM that has well aligned physicochemical properties, adequate brain penetration and pharmacokinetic (PK) properties, and is active in vivo. These favorable properties indicate that this series possesses suitable qualities for further development and studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Some design and operating aspects of the Ranger uranium mine treatment plant

International Nuclear Information System (INIS)

Baily, P.A.

1984-01-01

Environmental considerations were key factors in the design of the Ranger Uranium Mines treatment plant. The mine is located adjacent to the Kakadu National Park and has an average rainfall of 1.6m per annum. No contaminated water or liquid effluents are to be released from the project area and thus water management is a key design and operating fact. Particulate and gas emission criteria influenced design as did occupational hygiene factors (dust, radon, housekeeping, maintenance access). Equipment selection and engineering standards were conservative and resulted in the plant attaining design performance in less than three months from the date of commissioning. A number of mechanical and operational problems were experienced. However, none of these problems have had a significant effect on production

Landmarks selection in street map design

International Nuclear Information System (INIS)

Kao, C J

2014-01-01

In Taiwan many electrical maps present their landmarks according to the category of the feature, a designer short of knowledge about mental representation of space, can cause the map to lose its communication effects. To resolve this map design problem, in this research through long-term memory recall, navigation and observation, and short-term memory processing 111 participants were asked to select the proper landmark from study area. The results reveal that in Taiwan convenience stores are the most popular local landmark in rural and urban areas. Their commercial signs have a unique design and bright color. Contrasted to their background, this makes the convenience store a salient feature. This study also developed a rule to assess the priority of the landmarks to design them in different scale maps

Landmarks selection in street map design

Science.gov (United States)

Kao, C. J.

2014-02-01

In Taiwan many electrical maps present their landmarks according to the category of the feature, a designer short of knowledge about mental representation of space, can cause the map to lose its communication effects. To resolve this map design problem, in this research through long-term memory recall, navigation and observation, and short-term memory processing 111 participants were asked to select the proper landmark from study area. The results reveal that in Taiwan convenience stores are the most popular local landmark in rural and urban areas. Their commercial signs have a unique design and bright color. Contrasted to their background, this makes the convenience store a salient feature. This study also developed a rule to assess the priority of the landmarks to design them in different scale maps.

The Role of Environmental Design in Cancer Prevention, Diagnosis, Treatment, and Survivorship: A Systematic Literature Review.

Science.gov (United States)

Gharaveis, Arsalan; Kazem-Zadeh, Mahshad

2018-01-01

The purpose of this literature review is to provide a better understanding of the impact that environmental design can have on the process of cancer prevention, diagnosis, treatment, and survivorship. Cancer is considered a chronic disease in the United States, and more than 1.6 million new cases are diagnosed annually. New strategies of cancer care propose patient-centered services to achieve the best outcome, and researchers have found that environmental design can be an important part of improving this care. Searches were conducted in the PubMed and Google Scholar databases as well as in specific healthcare design journals such as Health Environments Research & Design, Environmental Psychology, and Environment and Behavior. The criteria for articles included in the review were (a) English-language articles related to facility design, which addressed (b) the topics of built environment in relation to cancer diagnosis, treatment, and survivorship, and were (c) published in peer-reviewed journals between 2000 and 2017. Finally, 10 articles were selected, and the contents were analyzed. The selected articles demonstrate that environmental design is one of the critical factors for success throughout the whole continuum of cancer care from diagnosis to end-of-treatment. Some of the specific conclusions from the review are that "neighborhood-oriented" design strategies can be beneficial (by providing accessibility to all facilities along the patient's path), that access to nature for patients, staff, and visitors alike is associated with better outcomes, and that provisions for natural lighting and noise reduction are associated with cancer patients' well-being.

Rational design of nanomaterials for water treatment

KAUST Repository

Li, Renyuan

2015-08-26

The ever-increasing human demand for safe and clean water is gradually pushing conventional water treatment technologies to their limits and it is now a popular perception that the solutions to the existing and future water challenges will highly hinge upon the further development of nanomaterial sciences. The concept of rational design emphasizes ‘design-for-purpose’ and it necessitates a scientifically clear problem definition to initiate the nanomaterial design. The field of rational design of nanomaterials for water treatment has experienced a significant growth in the past decade and is poised to make its contribution in creating advanced next-generation water treatment technologies in the years to come. Within the water treatment context, this review offers a comprehensive and in-depth overview of the latest progress of the rational design, synthesis and applications of nanomaterials in adsorption, chemical oxidation and reduction reactions, membrane-based separation, oil/water separation, and synergistic multifunctional all-in-one nanomaterials/nanodevices. Special attention is paid on chemical concepts of the nanomaterial designs throughout the review.

Benign meningiomas: primary treatment selection affects survival

International Nuclear Information System (INIS)

Condra, Kellie S.; Buatti, John M.; Mendenhall, William M.; Friedman, William A.; Marcus, Robert B.; Rhoton, Albert L.

1997-01-01

Purpose: To examine the effect of primary treatment selection on outcomes for benign intracranial meningiomas at the University of Florida. Methods and Materials: For 262 patients, the impact of age, Karnofsky performance status, pathologic features, tumor size, tumor location, and treatment modality on local control and cause-specific survival was analyzed (minimum potential follow-up, 2 years; median follow-up, 8.2 years). Extent of surgery was classified by Simpson grade. Treatment groups: surgery alone (n = 229), surgery and postoperative radiotherapy (RT) (n = 21), RT alone (n = 7), radiosurgery alone (n = 5). Survival analysis: Kaplan-Meier method with univariate and multivariate analysis. Results: At 15 years, local control was 76% after total excision (TE) and 87% after subtotal excision plus RT (SE+RT), both significantly better (p = 0.0001) than after SE alone (30%). Cause-specific survival at 15 years was reduced after treatment with SE alone (51%), compared with TE (88%) or SE+RT (86%) (p = 0.0003). Recurrence after primary treatment portended decreased survival, independent of initial treatment group or salvage treatment selection (p = 0.001). Atypical pathologic features predicted reduced 15-year local control (54 vs. 71%) and cause-specific survival rates (57 vs. 86%). Multivariate analysis for cause-specific survival revealed treatment group (SE vs. others; p = 0.0001), pathologic features (atypical vs. typical; p = 0.0056), and Karnofsky performance status (≥80 vs. <80; p = 0.0153) as significant variables. Conclusion: Benign meningiomas are well managed by TE or SE+RT. SE alone is inadequate therapy and adversely affects cause-specific survival. Atypical pathologic features predict a poorer outcome, suggesting possible benefit from more aggressive treatment. Because local recurrence portends lower survival rates, primary treatment choice is important

Evaluating Varied Label Designs for Use with Medical Devices: Optimized Labels Outperform Existing Labels in the Correct Selection of Devices and Time to Select.

Directory of Open Access Journals (Sweden)

Laura Bix

Full Text Available Effective standardization of medical device labels requires objective study of varied designs. Insufficient empirical evidence exists regarding how practitioners utilize and view labeling.Measure the effect of graphic elements (boxing information, grouping information, symbol use and color-coding to optimize a label for comparison with those typical of commercial medical devices.Participants viewed 54 trials on a computer screen. Trials were comprised of two labels that were identical with regard to graphics, but differed in one aspect of information (e.g., one had latex, the other did not. Participants were instructed to select the label along a given criteria (e.g., latex containing as quickly as possible. Dependent variables were binary (correct selection and continuous (time to correct selection.Eighty-nine healthcare professionals were recruited at Association of Surgical Technologists (AST conferences, and using a targeted e-mail of AST members.Symbol presence, color coding and grouping critical pieces of information all significantly improved selection rates and sped time to correct selection (α = 0.05. Conversely, when critical information was graphically boxed, probability of correct selection and time to selection were impaired (α = 0.05. Subsequently, responses from trials containing optimal treatments (color coded, critical information grouped with symbols were compared to two labels created based on a review of those commercially available. Optimal labels yielded a significant positive benefit regarding the probability of correct choice ((P<0.0001 LSM; UCL, LCL: 97.3%; 98.4%, 95.5%, as compared to the two labels we created based on commercial designs (92.0%; 94.7%, 87.9% and 89.8%; 93.0%, 85.3% and time to selection.Our study provides data regarding design factors, namely: color coding, symbol use and grouping of critical information that can be used to significantly enhance the performance of medical device labels.

KPI (KEY PERFORMANCE INDICATORS APPLICATION ON BALLAST WATER TREATMENT SYSTEM SELECTION

Directory of Open Access Journals (Sweden)

Gülçin Vural

2017-01-01

Full Text Available Every day, more than 7,000 different marine species are transferred to different ecosystems via ballast water in ships. The introduction of invasive species can cause problems for native species. After realizing the serious potential problems associated with the transport of organisms in ballast water, national and international regulations were developed. In 2004, the International Maritime Organization introduced the International Convention for the Control and Management of Ships' Ballast Water and Sediments. With these regulations, the problems caused by ballast water have attracted attention and many companies have started to research and develop technologies for the management of ballast water. Today, there are hundreds of different systems for ballast-water treatment, and the selection of the most suitable system for a specific vessel is an increasingly important issue as the Convention nears enforcement on September 8, 2017. The goal of this study is to demonstrate that the application of key performance indicators (KPIs to the selection of a ballast-water treatment system (BWTS leads to a very useful tool with which shipyards can compare BWTSs. This allows them to make better choices and to designate the most suitable system for each of their ships. In this study, we examine two types of vessel from a shipyard in Istanbul, Turkey. They have different ballast-water capacities and equipment, and the most suitable system for each is selected by using the KPI method.

Treatment selection for tonsillar squamous cell carcinoma

Directory of Open Access Journals (Sweden)

Yao-Yuan Kuo

2013-04-01

Conclusion: Both primary surgery and RT/CRT organ preservation are effective treatments for tonsillar SCC. Single modality treatment, either surgery or RT/CRT, can typically be provided for stage I–II diseases. Although RT/CRT organ preservation is used more frequently for stage III–IV tonsillar SCC in recent years, primary surgery combined with adjuvant therapy still achieves equivalent outcomes. Multidisciplinary pretreatment counseling and the facilities and personnel available are therefore important for decision-making. In addition, if RT/CRT organ preservation is selected as the primary treatment, tumor tonsillectomy is not indicated.

MULTI-PERSON DECISION FOR SUSTAINABLE DESIGN ON IBS FLOOR SYSTEM SELECTION

Directory of Open Access Journals (Sweden)

Christiono Utomo

2013-05-01

Full Text Available Selecting a design solution (choice problem is one of the natures of design decision. If the problem is more complex and involves multi participants, decision aid is necessary. This paper discusses the nature of group judgment and negotiation on multi-criteria decision-making methodologies. It presents a conceptual model of negotiation support in a multi-person decision on building floor system selection. Decision technique (AHP was applied for decision process in a satisfying options and game theory for coalition formation. An n-person cooperative game is represented by a set of all players. The proposed coalition formation model enables each agent to select individually or coalition. It improves the value of building system decision. It further emphasizes the importance of performance evaluation in the design process and value-based decision. The support model can be extended to an automated negotiation and in different building system selection with proper  modification. Keywords: Multi-person, design decision, IBS, floor system selection.

Bayesian dose selection design for a binary outcome using restricted response adaptive randomization.

Science.gov (United States)

Meinzer, Caitlyn; Martin, Renee; Suarez, Jose I

2017-09-08

In phase II trials, the most efficacious dose is usually not known. Moreover, given limited resources, it is difficult to robustly identify a dose while also testing for a signal of efficacy that would support a phase III trial. Recent designs have sought to be more efficient by exploring multiple doses through the use of adaptive strategies. However, the added flexibility may potentially increase the risk of making incorrect assumptions and reduce the total amount of information available across the dose range as a function of imbalanced sample size. To balance these challenges, a novel placebo-controlled design is presented in which a restricted Bayesian response adaptive randomization (RAR) is used to allocate a majority of subjects to the optimal dose of active drug, defined as the dose with the lowest probability of poor outcome. However, the allocation between subjects who receive active drug or placebo is held constant to retain the maximum possible power for a hypothesis test of overall efficacy comparing the optimal dose to placebo. The design properties and optimization of the design are presented in the context of a phase II trial for subarachnoid hemorrhage. For a fixed total sample size, a trade-off exists between the ability to select the optimal dose and the probability of rejecting the null hypothesis. This relationship is modified by the allocation ratio between active and control subjects, the choice of RAR algorithm, and the number of subjects allocated to an initial fixed allocation period. While a responsive RAR algorithm improves the ability to select the correct dose, there is an increased risk of assigning more subjects to a worse arm as a function of ephemeral trends in the data. A subarachnoid treatment trial is used to illustrate how this design can be customized for specific objectives and available data. Bayesian adaptive designs are a flexible approach to addressing multiple questions surrounding the optimal dose for treatment efficacy

Selective Trapping of Volatile Fission Products with an Off-Gas Treatment System

Energy Technology Data Exchange (ETDEWEB)

B.R. Westphal; J.J. Park; J.M. Shin; G.I. Park; K.J. Bateman; D.L. Wahlquist

2008-07-01

A head-end processing step, termed DEOX for its emphasis on decladding via oxidation, is being developed for the treatment of spent oxide fuel by pyroprocessing techniques. The head-end step employs high temperatures to oxidize UO2 to U3O8 resulting in the separation of fuel from cladding and the removal of volatile fission products. Development of the head-end step is being performed in collaboration with the Korean Atomic Energy Research Institute (KAERI) through an International Nuclear Energy Research Initiative. Following the initial experimentation for the removal of volatile fission products, an off-gas treatment system was designed in conjunction with KAERI to collect specific fission gases. The primary volatile species targeted for trapping were iodine, technetium, and cesium. Each species is intended to be collected in distinct zones of the off-gas system and within those zones, on individual filters. Separation of the volatile off-gases is achieved thermally as well as chemically given the composition of the filter media. A description of the filter media and a basis for its selection will be given along with the collection mechanisms and design considerations. In addition, results from testing with the off-gas treatment system will be presented.

Threat-Related Selective Attention Predicts Treatment Success in Childhood Anxiety Disorders

NARCIS (Netherlands)

J.S. Legerstee (Jeroen); J.H.M. Tulen (Joke); V.L. Kallen (Victor); G.C. Dieleman (Gwen); P.D.A. Treffers (Philip); F.C. Verhulst (Frank); E.M.W.J. Utens (Elisabeth)

2009-01-01

textabstractAbstract OBJECTIVE: The present study examined whether threat-related selective attention was predictive of treatment success in children with anxiety disorders and whether age moderated this association. Specific components of selective attention were examined in treatment responders

Threat-related selective attention predicts treatment success in childhood anxiety disorders

NARCIS (Netherlands)

Legerstee, Jeroen S.; Tulen, Joke H. M.; Kallen, Victor L.; Dieleman, Gwen C.; Treffers, Philip D. A.; Verhulst, Frank C.; Utens, Elisabeth M. W. J.

2009-01-01

The present study examined whether threat-related selective attention was predictive of treatment success in children with anxiety disorders and whether age moderated this association. Specific components of selective attention were examined in treatment responders and nonresponders. Participants

MWH's water treatment: principles and design

National Research Council Canada - National Science Library

Crittenden, John C

2012-01-01

... with additional worked problems and new treatment approaches. It covers both the principles and theory of water treatment as well as the practical considerations of plant design and distribution...

Sorbent selection and design considerations for uranium trapping

International Nuclear Information System (INIS)

Schultz, R.M.; Hobbs, W.E.; Norton, J.L.; Stephenson, M.J.

1981-07-01

The efficient removal of UF 6 from effluent streams can be accomplished through the selection of the best solid sorbent and the implementation of good design principles. Pressure losses, sorbent capacity, reaction kinetics, sorbent regeneration/uranium recovery requirements and the effects of other system components are the performance factors which are summarized. The commonly used uranium trapping materials highlighted are sodium fluoride, H-151 alumina, XF-100 alumina, and F-1 alumina. Sorbent selection and trap design have to be made on a case-by-case basis but the theoretical modeling studies and the evaluation of the performance factors presented can be used as a guide for other chemical trap applications

Designer ligands: The search for metal ion selectivity

Directory of Open Access Journals (Sweden)

Perry T. Kaye

2011-03-01

Full Text Available The paper reviews research conducted at Rhodes University towards the development of metal-selective ligands. The research has focused on the rational design, synthesis and evaluation of novel ligands for use in the formation of copper complexes as biomimetic models of the metalloenzyme, tyrosinase, and for the selective extraction of silver, nickel and platinum group metal ions in the presence of contaminating metal ions. Attention has also been given to the development of efficient, metal-selective molecular imprinted polymers.

Treatment planning and smile design using composite resin.

Science.gov (United States)

Marus, Robert

2006-05-01

Recent advances in dental materials and adhesive protocols have expanded the restorative procedures available to today's clinicians. Used in combination with proper treatment planning, these innovations enable dental professionals to provide enhanced aesthetic care that achieves the increasing expectations of their patients. Using a case presentation, this article will document the steps required to harmoniously integrate smile design, material selection, and patient communication that are involved in the provisional of aesthetic dental care. This article discusses the utilization of composite resin as a tool to enhance the patient's smile. Upon reading this article, the reader should: Become familiar with a smile-enhancing technique which can be completed in one office visit. Realize the benefits that intraoral composite mockups offer in terms of prototyping and confirming patient satisfaction.

Augmented Self-Modeling as a Treatment for Children with Selective Mutism.

Science.gov (United States)

Kehle, Thomas J.; Madaus, Melissa R.; Baratta, Victoria S.; Bray, Melissa A.

1998-01-01

Describes the treatment of three children experiencing selective mutism. The procedure utilized incorporated self-modeling, mystery motivators, self-reinforcement, stimulus fading, spacing, and antidepressant medication. All three children evidenced a complete cessation of selective mutism and maintained their treatment gains at follow-up.…

On Optimal Input Design and Model Selection for Communication Channels

Energy Technology Data Exchange (ETDEWEB)

Li, Yanyan [ORNL; Djouadi, Seddik M [ORNL; Olama, Mohammed M [ORNL

2013-01-01

In this paper, the optimal model (structure) selection and input design which minimize the worst case identification error for communication systems are provided. The problem is formulated using metric complexity theory in a Hilbert space setting. It is pointed out that model selection and input design can be handled independently. Kolmogorov n-width is used to characterize the representation error introduced by model selection, while Gel fand and Time n-widths are used to represent the inherent error introduced by input design. After the model is selected, an optimal input which minimizes the worst case identification error is shown to exist. In particular, it is proven that the optimal model for reducing the representation error is a Finite Impulse Response (FIR) model, and the optimal input is an impulse at the start of the observation interval. FIR models are widely popular in communication systems, such as, in Orthogonal Frequency Division Multiplexing (OFDM) systems.

Individual treatment selection for patients with posttraumatic stress disorder.

Science.gov (United States)

Deisenhofer, Anne-Katharina; Delgadillo, Jaime; Rubel, Julian A; Böhnke, Jan R; Zimmermann, Dirk; Schwartz, Brian; Lutz, Wolfgang

2018-04-16

Trauma-focused cognitive behavioral therapy (Tf-CBT) and eye movement desensitization and reprocessing (EMDR) are two highly effective treatment options for posttraumatic stress disorder (PTSD). Yet, on an individual level, PTSD patients vary substantially in treatment response. The aim of the paper is to test the application of a treatment selection method based on a personalized advantage index (PAI). The study used clinical data for patients accessing treatment for PTSD in a primary care mental health service in the north of England. PTSD patients received either EMDR (N = 75) or Tf-CBT (N = 242). The Patient Health Questionnaire (PHQ-9) was used as an outcome measure for depressive symptoms associated with PTSD. Variables predicting differential treatment response were identified using an automated variable selection approach (genetic algorithm) and afterwards included in regression models, allowing the calculation of each patient's PAI. Age, employment status, gender, and functional impairment were identified as relevant variables for Tf-CBT. For EMDR, baseline depressive symptoms as well as prescribed antidepressant medication were selected as predictor variables. Fifty-six percent of the patients (n = 125) had a PAI equal or higher than one standard deviation. From those patients, 62 (50%) did not receive their model-predicted treatment and could have benefited from a treatment assignment based on the PAI. Using a PAI-based algorithm has the potential to improve clinical decision making and to enhance individual patient outcomes, although further replication is necessary before such an approach can be implemented in prospective studies. © 2018 Wiley Periodicals, Inc.

Uniform design based SVM model selection for face recognition

Science.gov (United States)

Li, Weihong; Liu, Lijuan; Gong, Weiguo

2010-02-01

Support vector machine (SVM) has been proved to be a powerful tool for face recognition. The generalization capacity of SVM depends on the model with optimal hyperparameters. The computational cost of SVM model selection results in application difficulty in face recognition. In order to overcome the shortcoming, we utilize the advantage of uniform design--space filling designs and uniformly scattering theory to seek for optimal SVM hyperparameters. Then we propose a face recognition scheme based on SVM with optimal model which obtained by replacing the grid and gradient-based method with uniform design. The experimental results on Yale and PIE face databases show that the proposed method significantly improves the efficiency of SVM model selection.

Evaluation of peptide selection approaches for epitope‐based vaccine design

DEFF Research Database (Denmark)

Schubert, B.; Lund, Ole; Nielsen, Morten

2013-01-01

A major challenge in epitope-based vaccine (EV) design stems from the vast genomic variation of pathogens and the diversity of the host cellular immune system. Several computational approaches have been published to assist the selection of potential T cell epitopes for EV design. So far, no thoro......A major challenge in epitope-based vaccine (EV) design stems from the vast genomic variation of pathogens and the diversity of the host cellular immune system. Several computational approaches have been published to assist the selection of potential T cell epitopes for EV design. So far...... in terms of in silico measurements simulating important vaccine properties like the ability of inducing protection against a multivariant pathogen in a population; the predicted immunogenicity; pathogen, allele, and population coverage; as well as the conservation of selected epitopes. Additionally, we...... evaluate the use of human leukocyte antigen (HLA) supertypes with regards to their applicability for population-spanning vaccine design. The results showed that in terms of induced protection methods that simultaneously aim to optimize pathogen and HLA coverage significantly outperform methods focusing...

Fabrication and characterization of selective laser melting printed Ti–6Al–4V alloys subjected to heat treatment for customized implants design

Directory of Open Access Journals (Sweden)

Mengke Wang

2016-12-01

Full Text Available Selective laser melting (SLM is a promising technique capable of rapidly fabricating customized implants having desired macro- and micro-structures by using computer-aided design models. However, the SLM-based products often have non-equilibrium microstructures and partial surface defects because of the steep thermal gradients and high solidification rates that occur during the laser melting. To meet clinical requirements, a heat treatment was used to tailor the physiochemical properties, homogenize the metallic microstructures, and eliminate surface defects, expecting to improve the cytocompatibility in vitro. Compared with the as-printed Ti–6Al–4V substrate, the heat-treated substrate had a more hydrophilic, rougher and more homogeneous surface, which should promote the early cell attachment, proliferation and osseointegration. More importantly, a crystalline rutile TiO2 layer formed during the heat treatment, which should greatly promote the biocompatibility and corrosion resistance of the implant. Compared to the untreated surfaces, the adhesion and proliferation of human bone mesenchymal stem cells (hBMSCs on heat-treated substrates were significantly enhanced, implying an excellent cytocompatibility after annealing. Therefore, these findings provide an alternative to biofunctionalized SLM-based Ti–6Al–4V implants with optimized physiochemical properties and biocompatibility for orthopedic and dental applications.

Behavior Observations for Linking Assessment to Treatment for Selective Mutism

Science.gov (United States)

Shriver, Mark D.; Segool, Natasha; Gortmaker, Valerie

2011-01-01

Selective mutism is a childhood disorder that most school psychologists and educational providers will come across at least once in their careers. Selective mutism is associated with significant impairment in educational settings where speaking is necessary for academic and social skill development. Effective treatments for selective mutism…

Design of field experiments: Influence of treatment response relative to standard deviation and blocking factor characteristics on efficient blocking strategy

Science.gov (United States)

Selection of experimental design can markedly influence efficiency of field research. This study used Monte Carlo simulations to compare the ability of different field experimental designs to distinguish defined treatment differences, and the paper concludes with a section on practical use of the in...

Executive-style briefings on selected repository design issues

International Nuclear Information System (INIS)

1978-01-01

This document is a collection of executive-style briefings on selected repository design issues. Most of the briefings discuss differences between the US repository design bases presented in US Working Draft on Repository Physical Descriptions in a Salt Formation, prepared in support of INFCE discussions of May 1978 and the FRG-Netherlands design bases, presented in Design Study of a Radioactive Waste Repository to be Mined in a Medium-Size Salt Dome by Hamstra and Velzeboer, Netherlands Energy Research Foundation, January 1978. Advantages and disadvantages of the two sets of design bases are discussed, and the impacts of adopting either of these bases on the other's programs and positions are identified

Process of establishing design requirements and selecting alternative configurations for conceptual design of a VLA

Directory of Open Access Journals (Sweden)

Bo-Young Bae

2017-04-01

Full Text Available In this study, a process for establishing design requirements and selecting alternative configurations for the conceptual phase of aircraft design has been proposed. The proposed process uses system-engineering-based requirement-analysis techniques such as objective tree, analytic hierarchy process, and quality function deployment to establish logical and quantitative standards. Moreover, in order to perform a logical selection of alternative aircraft configurations, it uses advanced decision-making methods such as morphological matrix and technique for order preference by similarity to the ideal solution. In addition, a preliminary sizing tool has been developed to check the feasibility of the established performance requirements and to evaluate the flight performance of the selected configurations. The present process has been applied for a two-seater very light aircraft (VLA, resulting in a set of tentative design requirements and two families of VLA configurations: a high-wing configuration and a low-wing configuration. The resulting set of design requirements consists of three categories: customer requirements, certification requirements, and performance requirements. The performance requirements include two mission requirements for the flight range and the endurance by reflecting the customer requirements. The flight performances of the two configuration families were evaluated using the sizing tool developed and the low-wing configuration with conventional tails was selected as the best baseline configuration for the VLA.

Evaluation of a prototype decision support system for selecting trench cap designs

International Nuclear Information System (INIS)

Paige, G.B.; Stone, J.J.; Lane, L.J.

1996-01-01

A computer-based prototype decision support system (PDSS) to assist the risk manager in selecting an appropriate trench cap design for waste disposal sites is evaluated. The selection of the open-quotes bestclose quotes design among feasible alternatives requires consideration of multiple and often conflicting objectives. The methodology used in the selection process consists of. selecting and parameterizing decision variables, using data, simulation models, or expert opinion; selecting feasible trench cap design alternatives; ordering the decision variables and ranking the design alternatives. The simulation models incorporated in the PDSS are the Hydrologic Evaluation of Landfill Performance (HELP) model which is used to simulate the trench cap water balance and the Chemicals, Runoff, and Erosion from Agricultural Management Systems (CREAMS) erosion component that is used to simulate trench cap erosion. The decision model is based on multi-objective decision theory and uses a unique approach to order the decision variables and rank the design alternatives. The PDSS is evaluated using the Hill Air Force Base landfill cover demonstration project. The water balance and surface erosion of four alternative landfill cover designs were monitored for a 4-yr period. Two of the cover designs were used to calibrate and test the simulation models. The results of the PDSS, using both data from all four designs and long-term simulations from two of the designs, illustrate the relative advantages of each of the cover designs and which cover is the open-quotes bestclose quotes alternative for a given set of criteria and a particular importance order of those decision criteria. 22 refs., 6 figs., 4 tabs

Treatment of selective mutism based on cognitive behavioural therapy, psychopharmacology and combination therapy - a systematic review.

Science.gov (United States)

Østergaard, Kasper Rud

2018-02-15

Selective mutism (SM) is a debilitating childhood anxiety disorder characterized by a persistent lack of speech in certain social settings and is considered hard to treat. Cognitive behavioral therapy (CBT) and pharmacological treatments are the best described treatments in the literature. To test whether there is evidence on treatment based on CBT, medication or a combination of these. Systematic and critical review of the literature on CBT and/or pharmacological treatments of SM. Literature was sought on PubMed, Embase and Psycinfo in March 2017. Of the included studies, six examined CBT, seven pharmacologic treatment and two a combination of these. Using CBT 53/60 children improved symptomatically whilst respectively 55/67 and 6/7 improved using pharmacologic- and combination-treatment. Pharmacologic treatment and especially CBT showed promising results supported by some degree of evidence, which combination treatment lacks. Yet small numbers, few RCTs, heterogeneous study designs, lack of consistent measures, short treatment and follow-up periods, generally limits the evidence. This needs focus in future research.

The Optimization-Based Design and Synthesis of Water Network for Water Management in an Industrial Process: Refinery Effluent Treatment Plant

DEFF Research Database (Denmark)

Sueviriyapan, Natthapong; Siemanond, Kitipat; Quaglia, Alberto

2014-01-01

The increasing awareness of the sustainability of water resources has become an important issue. Many process industries contribute to high water consumption and wastewater generation. Problems in industrial water management include the processing of complex contaminants in wastewater, selection...... of wastewater treatment technologies, as well as water allocation, limited reuse, and recycling strategies. Therefore, a water and wastewater treatment network design requires the integration of both economic and environmental perspectives. The aim of this work was to modify and develop a generic model......-based synthesis process for a water/wastewater treatment network design problem utilizing the framework of Quaglia et al. (2013) in order to effectively design, synthesize, and optimize an industrial water management problem using different scenarios (both existing and retrofit system design). The model...

Material selection for design, manufacturing and application

International Nuclear Information System (INIS)

Zaid, A.I.O.

2011-01-01

Developing a new engineering material product or changing an existing one requires new design selecting material and choosing appropriate and economical manufacturing processes. These three main factors play a great role on the performance of the product in service. These items are independent and should not be performed in isolation from each other. With the great advancement of technology in the last decade and with the greater number of engineering materials which are now available, together with the increasing pressure to produce more economic and get reliable products an integrated approach which considers design, material selection and the appropriate manufacturing process makes it easier to achieve the optimum product that combines the functional requirements with the reliability at competitive cost. These diverse activities or items are interdependent; therefore should not be considered in isolation from each other, for example, it is not sufficient that design of the product should satisfy the technical, safety and legal requirements, it must also be possible to be manufactured economically and to be sold at a competitive price and easily disposed at the end of its working life cycle. In this paper, the interaction of these items together in order to arrive to the optimum solution for a particular application are given and discussed. (author)

SELECTION OF CHEMICAL TREATMENT PROGRAM FOR OILY WASTEWATER

Directory of Open Access Journals (Sweden)

Miguel Díaz

2017-04-01

Full Text Available When selecting a chemical treatment program for wastewater to achieve an effective flocculation and coagulation is crucial to understand how individual colloids interact. The coagulation process requires a rapid mixing while flocculation process needs a slow mixing. The behavior of colloids in water is strongly influenced by the electrokinetic charge, where each colloidal particle carries its own charge, which in its nature is usually negative. Polymers, which are long chains of high molecular weight and high charge, when added to water begin to form longer chains, allowing removing numerous particles of suspended matter. A study of physico-chemical treatment by addition of coagulant and flocculant was carried out in order to determine a chemical program for oily wastewater coming from the gravity separation process in a crude oil refinery. The tests were carried out in a Jar Test equipment, where commercial products: aluminum polychloride (PAC, aluminum sulfate and Sintec D50 were evaluated with five different flocculants. The selected chemical program was evaluated with fluids at three temperatures to know its sensitivity to this parameter and the mixing energy in the coagulation and flocculation. The chemical program and operational characteristics for physico-chemical treatment with PAC were determined, obtaining a removal of more than 93% for suspended matter and 96% for total hydrocarbons for the selected coagulant / flocculant combination.

Selection of technologies for municipal wastewater treatment

Directory of Open Access Journals (Sweden)

Juan Pablo Rodríguez Miranda

2015-11-01

Full Text Available In water environmental planning in watersheds should contain aspects for the decontamination of receiving water body, therefore the selection of the treatment plants municipal wastewater in developing countries, you should consider aspects of the typical composition raw wastewater pollutant removal efficiency by technology, performance indicators for technology, environmental aspects of localization and spatial localization strategy. This methodology is built on the basis of technical, economic and environmental attributes, such as a tool for decision making future investments in treatment plants municipal wastewater with multidisciplinary elements.

Computer-aided Framework for Synthesis, Design and Retrofit of Wastewater Treatment Plants

DEFF Research Database (Denmark)

Bozkurt, Hande

Water is used for several purposes in houses and industrial applications, which results in the generation of considerable amounts of wastewater. Wastewater should be handled appropriately which is required from legal, environmental as well as economic and societal perspectives. Wastewater treatment...... be formulated as a process synthesis challenge in the sense that a new taskcan be added to the existing treatment line or one or several existing processes can be changed as a result of the emerging needs. Existing plants need retrofitting due to a number of reasons such as: change in the wastewater flow...... plant (WWTP) design is a formidable challenge. One of the key steps involved is the process synthesis - defined as the selection of treatment processes as a combination of unit operations and processes to create the process flow diagram.As a consequence of the emerging technological developments...

Key Aspects of Nucleic Acid Library Design for in Vitro Selection

Science.gov (United States)

Vorobyeva, Maria A.; Davydova, Anna S.; Vorobjev, Pavel E.; Pyshnyi, Dmitrii V.; Venyaminova, Alya G.

2018-01-01

Nucleic acid aptamers capable of selectively recognizing their target molecules have nowadays been established as powerful and tunable tools for biospecific applications, be it therapeutics, drug delivery systems or biosensors. It is now generally acknowledged that in vitro selection enables one to generate aptamers to almost any target of interest. However, the success of selection and the affinity of the resulting aptamers depend to a large extent on the nature and design of an initial random nucleic acid library. In this review, we summarize and discuss the most important features of the design of nucleic acid libraries for in vitro selection such as the nature of the library (DNA, RNA or modified nucleotides), the length of a randomized region and the presence of fixed sequences. We also compare and contrast different randomization strategies and consider computer methods of library design and some other aspects. PMID:29401748

Designing Superoxide-Generating Quantum Dots for Selective Light-Activated Nanotherapy

Science.gov (United States)

Goodman, Samuel M.; Levy, Max; Li, Fei-Fei; Ding, Yuchen; Courtney, Colleen M.; Chowdhury, Partha P.; Erbse, Annette; Chatterjee, Anushree; Nagpal, Prashant

2018-03-01

The rapid emergence of superbugs or multi-drug resistant (MDR) organisms has prompted a search for novel antibiotics, beyond traditional small-molecule therapies. Nanotherapeutics are being investigated as alternatives, and recently superoxide-generating quantum dots (QDs) have been shown as important candidates for selective light-activated therapy and potentiating existing antibiotics against MDR superbugs. Their therapeutic action is selective, can be tailored by simply changing their quantum-confined conduction-valence bands and their alignment with different redox half-reactions, and hence their ability to generate specific radical species in biological media. Here, we show the design of superoxide-generating QDs using optimal QD material and size well matched to superoxide redox potential, charged ligands to modulate their uptake in cells and selective redox interventions, and core/shell structures to improve their stability for therapeutic action. We show that cadmium telluride (CdTe) QDs with conduction band position at -0.5V with respect to Normal Hydrogen Electron (NHE) and visible 2.4 eV bandgap generate a large flux of selective superoxide radicals, thereby demonstrating the most effective light-activated therapy. Although the positively charged QDs demonstrate large cellular uptake, they bind indiscriminately to cell surfaces and cause non-selective cell death, while negatively charged and zwitterionic QD ligands reduce the uptake and allow selective therapeutic action via interaction with redox species. The stability of designed QDs in biologically-relevant media increases with the formation of core-shell QD structures, but an appropriate design of core-shell structures is needed to minimize any reduction in charge injection efficiency to adsorbed oxygen molecules (to form superoxide) and maintain similar quantitative generation of tailored redox species, as measured using electron paramagnetic resonance (EPR) spectroscopy and electrochemical

Designing Superoxide-Generating Quantum Dots for Selective Light-Activated Nanotherapy.

Science.gov (United States)

Goodman, Samuel M; Levy, Max; Li, Fei-Fei; Ding, Yuchen; Courtney, Colleen M; Chowdhury, Partha P; Erbse, Annette; Chatterjee, Anushree; Nagpal, Prashant

2018-01-01

The rapid emergence of superbugs, or multi-drug resistant (MDR) organisms, has prompted a search for novel antibiotics, beyond traditional small-molecule therapies. Nanotherapeutics are being investigated as alternatives, and recently superoxide-generating quantum dots (QDs) have been shown as important candidates for selective light-activated therapy, while also potentiating existing antibiotics against MDR superbugs. Their therapeutic action is selective, can be tailored by simply changing their quantum-confined conduction-valence band (CB-VB) positions and alignment with different redox half-reactions-and hence their ability to generate specific radical species in biological media. Here, we show the design of superoxide-generating QDs using optimal QD material and size well-matched to superoxide redox potential, charged ligands to modulate their uptake in cells and selective redox interventions, and core/shell structures to improve their stability for therapeutic action. We show that cadmium telluride (CdTe) QDs with conduction band (CB) position at -0.5 V with respect to Normal Hydrogen Electron (NHE) and visible 2.4 eV bandgap generate a large flux of selective superoxide radicals, thereby demonstrating the effective light-activated therapy. Although the positively charged QDs demonstrate large cellular uptake, they bind indiscriminately to cell surfaces and cause non-selective cell death, while negatively charged and zwitterionic QD ligands reduce the uptake and allow selective therapeutic action via interaction with redox species. The stability of designed QDs in biologically-relevant media increases with the formation of core-shell QD structures, but an appropriate design of core-shell structures is needed to minimize any reduction in charge injection efficiency to adsorbed oxygen molecules (to form superoxide) and maintain similar quantitative generation of tailored redox species, as measured using electron paramagnetic resonance (EPR) spectroscopy and

New evaluation methods for conceptual design selection using computational intelligence techniques

Energy Technology Data Exchange (ETDEWEB)

Huang, Hong Zhong; Liu, Yu; Li, Yanfeng; Wang, Zhonglai [University of Electronic Science and Technology of China, Chengdu (China); Xue, Lihua [Higher Education Press, Beijing (China)

2013-03-15

The conceptual design selection, which aims at choosing the best or most desirable design scheme among several candidates for the subsequent detailed design stage, oftentimes requires a set of tools to conduct design evaluation. Using computational intelligence techniques, such as fuzzy logic, neural network, genetic algorithm, and physical programming, several design evaluation methods are put forth in this paper to realize the conceptual design selection under different scenarios. Depending on whether an evaluation criterion can be quantified or not, the linear physical programming (LPP) model and the RAOGA-based fuzzy neural network (FNN) model can be utilized to evaluate design alternatives in conceptual design stage. Furthermore, on the basis of Vanegas and Labib's work, a multi-level conceptual design evaluation model based on the new fuzzy weighted average (NFWA) and the fuzzy compromise decision-making method is developed to solve the design evaluation problem consisting of many hierarchical criteria. The effectiveness of the proposed methods is demonstrated via several illustrative examples.

New evaluation methods for conceptual design selection using computational intelligence techniques

International Nuclear Information System (INIS)

Huang, Hong Zhong; Liu, Yu; Li, Yanfeng; Wang, Zhonglai; Xue, Lihua

2013-01-01

The conceptual design selection, which aims at choosing the best or most desirable design scheme among several candidates for the subsequent detailed design stage, oftentimes requires a set of tools to conduct design evaluation. Using computational intelligence techniques, such as fuzzy logic, neural network, genetic algorithm, and physical programming, several design evaluation methods are put forth in this paper to realize the conceptual design selection under different scenarios. Depending on whether an evaluation criterion can be quantified or not, the linear physical programming (LPP) model and the RAOGA-based fuzzy neural network (FNN) model can be utilized to evaluate design alternatives in conceptual design stage. Furthermore, on the basis of Vanegas and Labib's work, a multi-level conceptual design evaluation model based on the new fuzzy weighted average (NFWA) and the fuzzy compromise decision-making method is developed to solve the design evaluation problem consisting of many hierarchical criteria. The effectiveness of the proposed methods is demonstrated via several illustrative examples.

Overview and example application of the Landscape Treatment Designer

Science.gov (United States)

Alan A. Ager; Nicole M. Vaillant; David E. Owens; Stuart Brittain; Jeff. Hamann

2012-01-01

The Landscape Treatment Designer (LTD) is a multicriteria spatial prioritization and optimization system to help design and explore landscape fuel treatment scenarios. The program fills a gap between fire model programs such as FlamMap, and planning systems such as ArcFuels, in the fuel treatment planning process. The LTD uses inputs on spatial treatment objectives,...

Species selectivity in different sized topless trawl designs: Does size matter?

DEFF Research Database (Denmark)

Krag, Ludvig Ahm; Herrmann, Bent; Karlsen, Junita Diana

2015-01-01

-specific quotas. The toplesstrawl design was developed to improve species-specific selectivity in such fisheries. In a topless trawl,the foot rope is located more forward than the headline to allow fish to escape upwards, whereas theheadline is located in front in traditional trawl designs. In this study we...... Atlantic, topless trawls have been introducedas legal cod-selective trawl designs. However, this study demonstrates that identical gear modificationsmade to similar trawls of different sizes and used in the same fishery can lead to different results....

The selective external carotid arterial embolization treatment of uncontrollable epistaxis

International Nuclear Information System (INIS)

Yao Qunli; Liu Yizhi; Ni Caifang

2004-01-01

Objective: To evaluate the selective external carotid arterial embolization of uncontrollable epistaxis. Methods: 27 procedures of super-selective external carotid arterial embolization were performed with absorbable gelfoam by using Seldinger's method in 26 cases with uncontrollable epistaxis. Results: 27 procedures of super-selective intra-arterial embolization of uncontrollable epistaxis were all successful without any serious complication. Conclusions: Selective external carotid arterial embolization is safe, effective and successful in the treatment of severe epistaxis. (authors)

Natural selection and algorithmic design of mRNA.

Science.gov (United States)

Cohen, Barry; Skiena, Steven

2003-01-01

Messenger RNA (mRNA) sequences serve as templates for proteins according to the triplet code, in which each of the 4(3) = 64 different codons (sequences of three consecutive nucleotide bases) in RNA either terminate transcription or map to one of the 20 different amino acids (or residues) which build up proteins. Because there are more codons than residues, there is inherent redundancy in the coding. Certain residues (e.g., tryptophan) have only a single corresponding codon, while other residues (e.g., arginine) have as many as six corresponding codons. This freedom implies that the number of possible RNA sequences coding for a given protein grows exponentially in the length of the protein. Thus nature has wide latitude to select among mRNA sequences which are informationally equivalent, but structurally and energetically divergent. In this paper, we explore how nature takes advantage of this freedom and how to algorithmically design structures more energetically favorable than have been built through natural selection. In particular: (1) Natural Selection--we perform the first large-scale computational experiment comparing the stability of mRNA sequences from a variety of organisms to random synonymous sequences which respect the codon preferences of the organism. This experiment was conducted on over 27,000 sequences from 34 microbial species with 36 genomic structures. We provide evidence that in all genomic structures highly stable sequences are disproportionately abundant, and in 19 of 36 cases highly unstable sequences are disproportionately abundant. This suggests that the stability of mRNA sequences is subject to natural selection. (2) Artificial Selection--motivated by these biological results, we examine the algorithmic problem of designing the most stable and unstable mRNA sequences which code for a target protein. We give a polynomial-time dynamic programming solution to the most stable sequence problem (MSSP), which is asymptotically no more complex

Group therapy for selective mutism - a parents' and children's treatment group.

Science.gov (United States)

Sharkey, Louise; Mc Nicholas, Fiona; Barry, Edwina; Begley, Maire; Ahern, Sinead

2008-12-01

To evaluate the feasibility and effectiveness of group therapy for children with selective mutism and their parents. Five children (mean age 6.1 years) with a diagnosis of selective mutism were administered group therapy over an 8-week period. Parents simultaneously attended a second group, aimed at providing education and advice on managing selective mutism in everyday situations, and in the school environment. At post-treatment, all children increased their level of confident speaking in school, clinic and community settings. Parents indicated a reduction in their own anxiety levels, from pre- to post-treatment on self-rating scales. Findings support the feasibility and effectiveness of group therapy for children with selective mutism and their parents.

Structure- and function-based design of Plasmodium-selective proteasome inhibitors.

Science.gov (United States)

Li, Hao; O'Donoghue, Anthony J; van der Linden, Wouter A; Xie, Stanley C; Yoo, Euna; Foe, Ian T; Tilley, Leann; Craik, Charles S; da Fonseca, Paula C A; Bogyo, Matthew

2016-02-11

The proteasome is a multi-component protease complex responsible for regulating key processes such as the cell cycle and antigen presentation. Compounds that target the proteasome are potentially valuable tools for the treatment of pathogens that depend on proteasome function for survival and replication. In particular, proteasome inhibitors have been shown to be toxic for the malaria parasite Plasmodium falciparum at all stages of its life cycle. Most compounds that have been tested against the parasite also inhibit the mammalian proteasome, resulting in toxicity that precludes their use as therapeutic agents. Therefore, better definition of the substrate specificity and structural properties of the Plasmodium proteasome could enable the development of compounds with sufficient selectivity to allow their use as anti-malarial agents. To accomplish this goal, here we use a substrate profiling method to uncover differences in the specificities of the human and P. falciparum proteasome. We design inhibitors based on amino-acid preferences specific to the parasite proteasome, and find that they preferentially inhibit the β2-subunit. We determine the structure of the P. falciparum 20S proteasome bound to the inhibitor using cryo-electron microscopy and single-particle analysis, to a resolution of 3.6 Å. These data reveal the unusually open P. falciparum β2 active site and provide valuable information about active-site architecture that can be used to further refine inhibitor design. Furthermore, consistent with the recent finding that the proteasome is important for stress pathways associated with resistance of artemisinin family anti-malarials, we observe growth inhibition synergism with low doses of this β2-selective inhibitor in artemisinin-sensitive and -resistant parasites. Finally, we demonstrate that a parasite-selective inhibitor could be used to attenuate parasite growth in vivo without appreciable toxicity to the host. Thus, the Plasmodium proteasome is a

Structure and function based design of Plasmodium-selective proteasome inhibitors

Science.gov (United States)

Li, Hao; O'Donoghue, Anthony J.; van der Linden, Wouter A.; Xie, Stanley C.; Yoo, Euna; Foe, Ian T.; Tilley, Leann; Craik, Charles S.; da Fonseca, Paula C. A.; Bogyo, Matthew

2016-01-01

The proteasome is a multi-component protease complex responsible for regulating key processes such as the cell cycle and antigen presentation1. Compounds that target the proteasome are potentially valuable tools for the treatment of pathogens that depend on proteasome function for survival and replication. In particular, proteasome inhibitors have been shown to be toxic for the malaria parasite Plasmodium falciparum at all stages of its life cycle2-5. Most compounds that have been tested against the parasite also inhibit the mammalian proteasome resulting in toxicity that precludes their use as therapeutic agents2,6. Therefore, better definition of the substrate specificity and structural properties of the Plasmodium proteasome could enable the development of compounds with sufficient selectivity to allow their use as anti-malarial agents. To accomplish this goal, we used a substrate profiling method to uncover differences in the specificities of the human and P. falciparum proteasome. We designed inhibitors based on amino acid preferences specific to the parasite proteasome, and found that they preferentially inhibit the β 2 subunit. We determined the structure of the P. falciparum 20S proteasome bound to the inhibitor using cryo-electron microscopy (cryo-EM) and single particle analysis, to a resolution of 3.6 Å. These data reveal the unusually open P. falciparum β2 active site and provide valuable information regarding active site architecture that can be used to further refine inhibitor design. Furthermore, consistent with the recent finding that the proteasome is important for stress pathways associated with resistance of artemisinin (ART) family anti-malarials7,8, we observed growth inhibition synergism with low doses of this β 2 selective inhibitor in ART sensitive and resistant parasites. Finally, we demonstrated that a parasite selective inhibitor could be used to attenuate parasite growth in vivo without significant toxicity to the host. Thus, the

Design and evaluation of multi-indicator profiles for targeted-selective treatment against gastrointestinal nematodes at housing in adult dairy cows.

Science.gov (United States)

Ravinet, Nadine; Lehebel, Anne; Bareille, Nathalie; Lopez, Carlos; Chartier, Christophe; Chauvin, Alain; Madouasse, Aurélien

2017-04-15

Targeted-selective treatments against gastrointestinal nematode (GIN) in adult dairy cows require the identification of "cows to treat", i.e. cows whose milk production (MP) would increase after treatment. This study aimed at quantifying the ability of multi-indicator profiles to identify such cows. A randomized controlled clinical trial was conducted at housing in 25 French pasturing dairy herds. In each herd, treated cows received fenbendazole orally, control cows remained untreated. Daily MP was recorded and the MP variation between the pre- and post-visit periods was calculated (ΔMP) for each cow. ΔMP was modelled with control cows data (n=412) (piecewise linear mixed model). Estimated parameters were applied to treated cows data (n=414) to predict the expected ΔMP in treated cows if they had not been treated. Treated cows with an observed ΔMP (with treatment) higher than the expected ΔMP (without treatment) were labelled as "cows to treat". Herds where at least 50% of the young cows were "cows to treat" were qualified as "herds to target". To characterize such cows and herds, the available candidate indicators were (i) at the cow-level: parity, stage of lactation and production level, faecal egg count (FEC), serum pepsinogen level and anti-Ostertagia antibody level (expressed as ODR); (ii) at the herd-level: bulk tank milk (BTM) Ostertagia ODR, Time of Effective Contact (TEC, in months) with GIN infective larvae before the first calving, and percentage of positive FEC. These indicators were tested one-by-one or in combination to assess their ability to characterize "herds to target" and "cows to treat" (Chi-square tests). 115 out of 414 treated cows (27.8%) were considered as "cows to treat", and 9 out of 22 herds were qualified as "herds to target". The indicators retained to profile such cows and herds were the parity, the production level, the BTM Ostertagia ODR and the TEC. Multi-indicator profiles were much more specific than single indicator

Threat-Related Selective Attention Predicts Treatment Success in Childhood Anxiety Disorders

OpenAIRE

Legerstee, Jeroen; Tulen, Joke; Kallen, Victor; Dieleman, Gwen; Treffers, Philip; Verhulst, Frank; Utens, Elisabeth

2009-01-01

textabstractAbstract OBJECTIVE: The present study examined whether threat-related selective attention was predictive of treatment success in children with anxiety disorders and whether age moderated this association. Specific components of selective attention were examined in treatment responders and nonresponders. METHOD: Participants consisted of 131 children with anxiety disorders (aged 8-16 years), who received standardized cognitive-behavioral therapy. At pretreatment, a pictorial dot-pr...

Implications of material selection on the design of packaging machinery.

Science.gov (United States)

Merritt, J P

2009-01-01

Material selection has significant implications on the design and cost of horizontal-form-fill-seal packaging machinery. To avoid excessive costs, machine redesigns and project delays, material selection must be reconciled early in the project and revisited throughout the construction of the machine.

Influence of selected washing treatments and drying temperatures ...

African Journals Online (AJOL)

Influence of selected washing treatments and drying temperatures on ... with regard to the optimal retention of the crude protein and fat levels of the dried dagaa. ... are accessible to most of the households involved in dried fish processing.

Design of highly selective ethanol dehydration nanocatalysts for ethylene production.

Science.gov (United States)

Austin, Natalie; Kostetskyy, Pavlo; Mpourmpakis, Giannis

2018-02-22

Rational design of catalysts for selective conversion of alcohols to olefins is key since product selectivity remains an issue due to competing etherification reactions. Using first principles calculations and chemical rules, we designed novel metal-oxide-protected metal nanoclusters (M 13 X 4 O 12 , with M = Cu, Ag, and Au and X = Al, Ga, and In) exhibiting strong Lewis acid sites on their surface, active for the selective formation of olefins from alcohols. These symmetrical nanocatalysts, due to their curvature, show unfavorable etherification chemistries, while favoring the olefin production. Furthermore, we determined that water removal and regeneration of the nanocatalysts is more feasible compared to the equivalent strong acid sites on solid acids used for alcohol dehydration. Our results demonstrate an exceptional stability of these new nanostructures with the most energetically favorable being Cu-based. Thus, the high selectivity and stability of these in-silico-predicted novel nanoclusters (e.g. Cu 13 Al 4 O 12 ) make them attractive catalysts for the selective dehydration of alcohols to olefins.

Storage Tanks - Selection Of Type, Design Code And Tank Sizing

International Nuclear Information System (INIS)

Shatla, M.N; El Hady, M.

2004-01-01

The present work gives an insight into the proper selection of type, design code and sizing of storage tanks used in the Petroleum and Process industries. In this work, storage tanks are classified based on their design conditions. Suitable design codes and their limitations are discussed for each tank type. The option of storage under high pressure and ambient temperature, in spherical and cigar tanks, is compared to the option of storage under low temperature and slight pressure (close to ambient) in low temperature and cryogenic tanks. The discussion is extended to the types of low temperature and cryogenic tanks and recommendations are given to select their types. A study of pressurized tanks designed according to ASME code, conducted in the present work, reveals that tanks designed according to ASME Section VIII DIV 2 provides cost savings over tanks designed according to ASME Section VIII DlV 1. The present work is extended to discuss the parameters that affect sizing of flat bottom cylindrical tanks. The analysis shows the effect of height-to-diameter ratio on tank instability and foundation loads

Design and material selection for ITER first wall/blanket, divertor and vacuum vessel

Science.gov (United States)

Ioki, K.; Barabash, V.; Cardella, A.; Elio, F.; Gohar, Y.; Janeschitz, G.; Johnson, G.; Kalinin, G.; Lousteau, D.; Onozuka, M.; Parker, R.; Sannazzaro, G.; Tivey, R.

1998-10-01

Design and R&D have progressed on the ITER vacuum vessel, shielding and breeding blankets, and the divertor. The principal materials have been selected and the fabrication methods selected for most of the components based on design and R&D results. The resulting design changes are discussed for each system.

Position paper - peer review and design verification of selected activities

International Nuclear Information System (INIS)

Stine, M.D.

1994-09-01

Position Paper to develop and document a position on the performance of independent peer reviews on selected design and analysis components of the Title I (preliminary) and Title II (detailed) design phases of the Multi-Function Waste Tank Facility project

Joint beam design and user selection over non-binary coded MIMO interference channel

Science.gov (United States)

Li, Haitao; Yuan, Haiying

2013-03-01

In this paper, we discuss the problem of sum rate improvement for coded MIMO interference system, and propose joint beam design and user selection over interference channel. Firstly, we have formulated non-binary LDPC coded MIMO interference networks model. Then, the least square beam design for MIMO interference system is derived, and the low complexity user selection is presented. Simulation results confirm that the sum rate can be improved by the joint user selection and beam design comparing with single interference aligning beamformer.

Heat exchanger selection and design analyses for metal hydride heat pump systems

DEFF Research Database (Denmark)

Mazzucco, Andrea; Voskuilen, Tyler G.; Waters, Essene L.

2016-01-01

This study presents a design analysis for the development of highly efficient heat exchangers within stationary metal hydride heat pumps. The design constraints and selected performance criteria are applied to three representative heat exchangers. The proposed thermal model can be applied to select...... the most efficient heat exchanger design and provides outcomes generally valid in a pre-design stage. Heat transfer effectiveness is the principal performance parameter guiding the selection analysis, the results of which appear to be mildly (up to 13%) affected by the specific Nusselt correlation used....... The thermo-physical properties of the heat transfer medium and geometrical parameters are varied in the sensitivity analysis, suggesting that the length of independent tubes is the physical parameter that influences the performance of the heat exchangers the most. The practical operative regions for each...

Formulation of engineering design principles for the treatment of irradiated fuel and associated radioactive waste

International Nuclear Information System (INIS)

Banford, A.W.; Hanson, B.C.; Scully, P.J.; Taylor, R.

2007-01-01

The industrial scale treatment of irradiated fuel in the UK has resulted in BNFL developing extensive experience of the process design, build, commissioning, and operation necessary for successful nuclear processing plant. Much of the design experience now resides in Nexia Solutions (formally BNFL Research and Development Division) who have always defined and undertaken the extensive development programmes necessary to underpin the design at all stages of the project life-cycle. Since the 1990's, Nexia Solutions has built up a large portfolio of plant designs for a range of spent fuel applications, from fuel conditioning to partitioning and transmutation. In addition, by investigation of a large and diverse portfolio of technologies Nexia Solutions has developed innovative concepts for plant design that could present significant economic savings on conventional approaches. Using this experience and the lessons learned, we have developed and refined our own engineering design principles necessary for the successful design of commercial spent fuel and waste treatment plant. Our approach is to advocate an integral concept, with both science and engineering designs working in parallel during development. 4 foundation principles for success have been identified: -) understand the strategic objective, -) adopt a risk driven programme, -) engage in engineering activities early, and -) timely application of appropriate engineering methodologies. 2 Case studies presented in this paper: first, the BNFL segregated effluent treatment plant and secondly, the selection of a pyrochemical process for recycle of fast reactor, demonstrate how this approach has been adopted and the benefits that have been gained

Justifying the design and selection of literacy and thinking tools

Directory of Open Access Journals (Sweden)

David Whitehead

2008-10-01

Full Text Available Criteria for the design and selection of literacy and thinking tools that allow educators to justify what they do are described within a wider framework of learning theory and research into best practice. Based on a meta-analysis of best practice, results from a three year project designed to evaluate the effectiveness of a secondary school literacy initiative in New Zealand, together with recent research from cognitive and neuro-psychologists, it is argued that the design and selection of literacy and thinking tools used in elementary schools should be consistent with (i teaching focused (ii learner focused, (iii thought linked (iv neurologically consistent, (v subject specific, (vi text linked, (vii developmentally appropriate, and (viii assessment linked criteria.

Treatment of Fukushima contaminated waters TEPCO selected Areva and Veolia solution

International Nuclear Information System (INIS)

Seberac, Philippe; Paillard, Herve; Thierry, Jean-Marie; Bae, Ho-Il; Prevost, Thierry; Piot, Gregoire; Bertrand Ytournel

2012-09-01

The Actiflo-Rad TM system successfully contributed to treat the contaminated wastewaters from the damaged Fukushima Daiichi nuclear power plant. The decontamination system jointly designed by AREVA and Veolia Water treated about 77 500 m 3 of high activity wastewater (∼10 6 Bq/cm 3 ), combining radionuclides adsorbents developed by AREVA and the know-how of Veolia in water treatment for the settlement of the adsorbed radioactive elements, producing sludge with a weight concentration of 80 g/L. Both companies delivered the treatment facility quickly with an efficient joint organization - in a very complex environment. Assembled on Fukushima site - badly damaged by the tsunami following the earthquake of March 11 th - the system was designed, built and started in a record time of 2 month 1 / 2 , instead of several years in a classical nuclear engineering project. The Actiflo-Rad TM was a key equipment to achieve a stable situation of reactors, allowing treated water to be reused for core cooling. Commissioned with the on-site support of Veolia experts, the system reduced by 10 000 the Cs-activity of the wastewater even with significant salt content (seawater diluted twice) at a flow-rate slightly below the design value of 50 m 3 /hr. The implemented technologies are already used separately on AREVA sites (la Hague, fuel reprocessing plant) and for many water treatment projects by Veolia all over the world (Actiflo TM and Multiflo TM processes, using lamellar settling devices - in addition, the first one making use of micro-sand for a better floc quality). The complete treatment process selected by TEPCO features a physico-chemical treatment and water desalination, in five steps. After de-oiling, wastewater is primarily decontaminated through zeolite columns (Kurion process). This pre-decontaminated water is then treated on the AREVA-Veolia two stages system; at each stage, more than 30 minutes contact time with radionuclides adsorbents is needed, adsorbed

Design and material selection for ITER first wall/blanket, divertor and vacuum vessel

Energy Technology Data Exchange (ETDEWEB)

Ioki, K.; Barabash, V.; Cardella, A.; Elio, F.; Gohar, Y.; Janeschitz, G.; Johnson, G.; Kalinin, G.; Lousteau, D.; Onozuka, M.; Parker, R.; Sannazzaro, G.; Tivey, R. [ITER JCT, Garching (Germany)

1998-10-01

Design and R and D have progressed on the ITER vacuum vessel, shielding and breeding blankets, and the divertor. The principal materials have been selected and the fabrication methods selected for most of the components based on design and R and D results. The resulting design changes are discussed for each system. (orig.) 11 refs.

Selected parameters of moulding sands for designing quality control systems

Directory of Open Access Journals (Sweden)

J. Jakubski

2010-07-01

Full Text Available One of the modern methods of production optimisation are artificial neural networks. Neural networks owe their popularity to the fact thatthey are convenient tools, which can be utilised in a wide scope of problems. They are capable of reflecting complex functions. Especiallytheir non-linearity should be emphasised. They are gaining wider and wider application in the foundry industry, among others, to controlmelting processes in cupolas and arc furnaces, designing castings and supply systems, control of moulding sands treatments, prediction ofproperties of cast alloys as well as selecting die casting.An attempt of the application neural networks to the quality control of moulding sands with bentonite is presented in the paper. This isa method of assessing the suitability of moulding sands by finding correlations in between individual parameters, by means of artificialneural network systems. The presented investigations were performed with the application of the Statistica 8.0 program.The investigations were aimed at the selection of the proper kind of a neural network for prediction a sand moistness on the bases ofcertain moulding sand properties such as: permeability, compactibility and friability. These parameters – determined as sand moistness functions - were introduced as initial parameters.Application of the Statistica program allowed for an automatic selection of the most suitable network for the reflection of dependencies and interactions existing among the proposed parameters. The best results were obtained for unidirectional multi-layer perception network (MLP. The neural network sensitivity to individual moulding sand parameters was determined, which allowed to reject not important parameters when constructing the network.

Selection of fuel design for conversion and upgradation of Pakistan Research Reactor (PARR-1)

International Nuclear Information System (INIS)

Arshad, M.

1991-01-01

The Pakistan Research Reactor (PARR-1) is being converted from the use of Highly Enriched Uranium (HEU) to Low Enriched Uranium (LEU) fuel and its power is also being upgraded. In order to select new fuel for the converted and upgraded core ten different fuel element designs were analyzed and their relative performance was compared. Results of this study were later used to select appropriate design of the new fuel for PARR-1. This paper describes the computational methodology utilized for the analysis of various fuel element designs. Criteria for selecting the new fuel element are discussed and guidelines forming the selection basis of the new fuel design are given. (author)

Materials selection in micromechanical design: an application of the Ashby approach

OpenAIRE

Srikar, V.T.; Spearing, S.M.

2003-01-01

The set of materials available to microsystems designers is rapidly expanding. Techniques now exist to introduce and integrate a large number of metals, alloys, ceramics, glasses, polymers, and elastomers into microsystems, motivating the need for a rational approach for materials selection in microsystems design. As a step toward such an approach, we focus on the initial stages of materials selection for micromechanical structures with minimum feature sizes greater than 1 /spl mu/m. The vari...

Personnel Selection Using Fuzzy Axiomatic Design Principles

Directory of Open Access Journals (Sweden)

Anant V. Khandekar

2016-09-01

Full Text Available Overall competency of the working personnel is often observed to ultimately affect the productivity of an organization. The globalised competitive atmosphere coupled with technological improvements demands for efficient and specialized manpower for the industrial operations. A set of typical technological skills and attitudes is thus demanded for every job profile. Most often, these skills and attitudes are expressed imprecisely and hence, necessitating the support of fuzzy sets for their effective understanding and further processing. In this paper, a method based on fuzzy axiomatic design principles is applied for solving the personnel selection problems. Selecting a middle management staff of a service department for a large scale organization is demonstrated here as a real life example. Five shortlisted candidates are assessed with respect to a set of 18 evaluation criteria, and the selection committee with experts from the related fields also realizes the outcome of the adopted approach to be quite appropriate, befitting and in agreement with their expectations.

Photovoltaic module encapsulation design and materials selection, volume 1

Science.gov (United States)

Cuddihy, E.; Carroll, W.; Coulbert, C.; Gupta, A.; Liang, R. H.

1982-01-01

Encapsulation material system requirements, material selection criteria, and the status and properties of encapsulation materials and processes available are presented. Technical and economic goals established for photovoltaic modules and encapsulation systems and their status are described. Available encapsulation technology and data are presented to facilitate design and material selection for silicon flat plate photovoltaic modules, using the best materials available and processes optimized for specific power applications and geographic sites. The operational and environmental loads that encapsulation system functional requirements and candidate design concepts and materials that are identified to have the best potential to meet the cost and performance goals for the flat plate solar array project are described. Available data on encapsulant material properties, fabrication processing, and module life and durability characteristics are presented.

The calculation of 131I dose in second treatment for Graves' disease and the selection of patients

International Nuclear Information System (INIS)

Yang Jisheng; Wang Qiang; Hu Mingzao; Zuo Lei; Peng Xiaoyan

2001-01-01

Objective: To improve the method of 131 I dose calculation in second treatment for Graves' disease (GD) and to make a criterion for selection of patients. Methods: From 87 GD patients not recovered more than half a year after 131 I treatment, authors selected 41 cases (group A) whose thyroid weight were ≥30 g and gave them second 131 I treatment. The absorbed dose (d 2 ) of 131 I was calculated by the formula we designed: (m 1 /m 2 ):d 1 =(m 2 /m 3 ): d 2 ; i.e. d 2 (Gy) = d 1 m 2 2 /m 1 m 3 . The total dose (D) was calculated by the classical formula: D(37 KBq or μ Ci)= d 2 x 8 x m 2 (g)/1.6 x max. uptake % of 131 I x T 1/2eff (days). m 1 and m 2 was the thyroid weight before and after the first 131 I treatment respectively, m 3 was the pre-estimated thyroid weight after the second treatment, d 1 was the unit dose of the first treatment. Results were compared with 97 patients (group B) who had received second 131 I treatment before using this calculation method. The resting 46 cases (group C) whose thyroid weight were 131 I treatment of group A was 73.2% (30/41 cases), it was remarkably higher than that of group B (19.6%), but the early-permanent hypothyroidism rate was lower in group A. The recovery rate of group C was 91.3% (42/46 case) in two years (averaged 8.8 months). Conclusion: The calculating method can make the dose of second 131 I treatment for GD relatively optimal. Thyroid weight ≥30 g can be used as the main criterion for selection of patients 131 I treatment. Patients whose thyroid weight 131 I treatment and the therapeutic effect was poor

Modelling the impacts of pasture contamination and stocking rate for the development of targeted selective treatment strategies for Ostertagia ostertagi infection in calves

OpenAIRE

Berk, Zoe; Laurenson, Yan C.S.M.; Forbes, Andrew B.; Kyriazakis, Ilias

2017-01-01

A simulation study was carried out to assess whether variation in pasture contamination or stocking rate impact upon the optimal design of targeted selective treatment (TST) strategies. Two methods of TST implementation were considered: 1) treatment of a fixed percentage of a herd according to a given phenotypic trait, or 2) treatment of individuals that exceeded a threshold value for a given phenotypic trait. Four phenotypic traits, on which to base treatment were considered: 1) average dail...

[Outpatient treatment of selective mutism: long-standing selective mutism in a 17-year-old male].

Science.gov (United States)

Herdener-Pinnekamp, Katharina; Gundelfinger, Ronnie; Steinhausen, Hans-Christoph

2010-01-01

The present case report describes the successful treatment of a 17 year old male adolescent suffering for 10 years from selective mutism. Following a summary review of recent publications on therapy approaches, the report describes the treatment concept in the present case, including detailed assessment of co-morbid disorders, motivation for change, behaviour therapy with supporting drug intervention, and intensive co-operation with parents and other caretakers.

CBT for childhood anxiety disorders: differential changes in selective attention between treatment responders and non-responders.

Science.gov (United States)

Legerstee, Jeroen S; Tulen, Joke H M; Dierckx, Bram; Treffers, Philip D A; Verhulst, Frank C; Utens, Elisabeth M W J

2010-02-01

This study examined whether treatment response to stepped-care cognitive-behavioural treatment (CBT) is associated with changes in threat-related selective attention and its specific components in a large clinical sample of anxiety-disordered children. Ninety-one children with an anxiety disorder were included in the present study. Children received a standardized stepped-care CBT. Three treatment response groups were distinguished: initial responders (anxiety disorder free after phase one: child-focused CBT), secondary responders (anxiety disorder free after phase two: child-parent-focused CBT), and treatment non-responders. Treatment response was determined using a semi-structured clinical interview. Children performed a pictorial dot-probe task before and after stepped-care CBT (i.e., before phase one and after phase two CBT). Changes in selective attention to severely threatening pictures, but not to mildly threatening pictures, were significantly associated with treatment success. At pre-treatment assessment, initial responders selectively attended away from severely threatening pictures, whereas secondary responders selectively attended toward severely threatening pictures. After stepped-care CBT, initial and secondary responders did not show any selectivity in the attentional processing of severely threatening pictures. Treatment non-responders did not show any changes in selective attention due to CBT. Initial and secondary treatment responders showed a reduction of their predisposition to selectively attend away or toward severely threatening pictures, respectively. Treatment non-responders did not show any changes in selective attention. The pictorial dot-probe task can be considered a potentially valuable tool in assigning children to appropriate treatment formats as well as for monitoring changes in selective attention during the course of CBT.

ANALYSIS OF HYDRAULIC LOAD OF SELECTED WASTEWATER TREATMENT PLANT IN JASŁO COUNTY

Directory of Open Access Journals (Sweden)

Dariusz Piotr Młyński

2016-12-01

Full Text Available The paper presents an analysis of hydraulic load in selected a wastewater treatment plant (WTP in Jasło County: in Przysieki, Kołaczyce and Szebnie. The study was based on the records of daily sewage volume entering the treatment plants within a multi-year period of 2011-2014. The analysis took into account the average daily amount of incoming sewage, the maximum daily peaking factor for the incoming sewage, changes in the sewage volume depending on specific month and the intervals with the greatest frequency of occurrence were designated. The analysis revealed that investigated wastewater treatment plants were hydraulically underloaded. Moreover it was conclude a significant variables of inflowing sewage amount. The sewage admission was the largest in spring and summer periods. Sewage volume interval most often occurring at the WTP in Przysieki was the one between 320 and 480 m3•d-1, for Kołaczyce between 290 and 320 m3•d-1 and Szebnie between 120 and 240 m3•d-1.

Multimethod Behavioral Treatment of Long-Term Selective Mutism.

Science.gov (United States)

Watson, T. Steuart; Kramer, Jack J.

1992-01-01

Conducted single-subject, experimental research to examine efficacy of treating severe, long-term selective mutism in nine-year-old male using shaping, multiple reinforcers, natural consequences, stimulus fading, and mild aversives. Implemented different treatment regimens in home and school environments. Home intervention resulted in increase in…

Key issues on safety design basis selection and safety assessment

International Nuclear Information System (INIS)

An, S.; Togo, Y.

1976-01-01

In current fast reactor design in Japan, four design accident conditions and four design seismic conditions are adopted as the design base classifications. These are classified by the considerations on both likelihood of occurrence and the severeness of the consequences. There are several major problem areas in safety design consideration such as core accident problems which include fuel sodium interaction, fuel failure propagation and residual decay heat removal, and decay heat removal systems problems which is more or less the problem of selection of appropriate system and of assurance of high reliability of the system. In view of licensing, two kinds of accidents are postulated in evaluating the adequacy of a reactor site. The one is the ''major accident'' which is the accident to give most severe radiation hazard to the public from technical point of view. The other is the ''hypothetical accident'', induced public accident of which is severer than that of major accident. While the concept of the former is rather unique to Japanese licensing, the latter is almost equivalent to design base hypothetical accident of the US practice. In this paper, design bases selections, key safety issues and some of the licensing considerations in Japan are described

Project Selection in the Design Studio: Absence of Learning Environments

Science.gov (United States)

Basa, Inci

2010-01-01

Project selection is an essential matter of design teaching. Based on observations of a specific curriculum, the author claims that a wide repertoire of subjects including offices, restaurants, hotels, and other public places are used to prepare design students, but that schools and other "learning environments/ schools" are similarly…

Endocrine active chemicals, pharmaceuticals, and other chemicals of concern in surface water, wastewater-treatment plant effluent, and bed sediment, and biological characteristics in selected streams, Minnesota-design, methods, and data, 2009

Science.gov (United States)

Lee, Kathy E.; Langer, Susan K.; Barber, Larry B.; Writer, Jeff H.; Ferrey, Mark L.; Schoenfuss, Heiko L.; Furlong, Edward T.; Foreman, William T.; Gray, James L.; ReVello, Rhiannon C.; Martinovic, Dalma; Woodruff, Olivia R.; Keefe, Steffanie H.; Brown, Greg K.; Taylor, Howard E.; Ferrer, Imma; Thurman, E. Michael

2011-01-01

This report presents the study design, environmental data, and quality-assurance data for an integrated chemical and biological study of selected streams or lakes that receive wastewater-treatment plant effluent in Minnesota. This study was a cooperative effort of the U.S. Geological Survey, the Minnesota Pollution Control Agency, St. Cloud State University, the University of St. Thomas, and the University of Colorado. The objective of the study was to identify distribution patterns of endocrine active chemicals, pharmaceuticals, and other organic and inorganic chemicals of concern indicative of wastewater effluent, and to identify biological characteristics of estrogenicity and fish responses in the same streams. The U.S. Geological Survey collected and analyzed water, bed-sediment, and quality-assurance samples, and measured or recorded streamflow once at each sampling location from September through November 2009. Sampling locations included surface water and wastewater-treatment plant effluent. Twenty-five wastewater-treatment plants were selected to include continuous flow and periodic release facilities with differing processing steps (activated sludge or trickling filters) and plant design flows ranging from 0.002 to 10.9 cubic meters per second (0.04 to 251 million gallons per day) throughout Minnesota in varying land-use settings. Water samples were collected from the treated effluent of the 25 wastewater-treatment plants and at one point upstream from and one point downstream from wastewater-treatment plant effluent discharges. Bed-sediment samples also were collected at each of the stream or lake locations. Water samples were analyzed for major ions, nutrients, trace elements, pharmaceuticals, phytoestrogens and pharmaceuticals, alkylphenols and other neutral organic chemicals, carboxylic acids, and steroidal hormones. A subset (25 samples) of the bed-sediment samples were analyzed for carbon, wastewater-indicator chemicals, and steroidal hormones; the

Interval-valued intuitionistic fuzzy multi-criteria model for design concept selection

Directory of Open Access Journals (Sweden)

Daniel Osezua Aikhuele

2017-09-01

Full Text Available This paper presents a new approach for design concept selection by using an integrated Fuzzy Analytical Hierarchy Process (FAHP and an Interval-valued intuitionistic fuzzy modified TOP-SIS (IVIF-modified TOPSIS model. The integrated model which uses the improved score func-tion and a weighted normalized Euclidean distance method for the calculation of the separation measures of alternatives from the positive and negative intuitionistic ideal solutions provides a new approach for the computation of intuitionistic fuzzy ideal solutions. The results of the two approaches are integrated using a reflection defuzzification integration formula. To ensure the feasibility and the rationality of the integrated model, the method is successfully applied for eval-uating and selecting some design related problems including a real-life case study for the selec-tion of the best concept design for a new printed-circuit-board (PCB and for a hypothetical ex-ample. The model which provides a novel alternative, has been compared with similar computa-tional methods in the literature.

Treatment Options for Liquid Radioactive Waste. Factors Important for Selecting of Treatment Methods

Energy Technology Data Exchange (ETDEWEB)

Dziewinski, J.J.

1998-09-28

The cleanup of liquid streams contaminated with radionuclides is obtained by the selection or a combination of a number of physical and chemical separations, processes or unit operations. Among those are: Chemical treatment; Evaporation; Ion exchange and sorption; Physical separation; Electrodialysis; Osmosis; Electrocoagulation/electroflotation; Biotechnological processes; and Solvent extraction.

Treatment Options for Liquid Radioactive Waste. Factors Important for Selecting of Treatment Methods

International Nuclear Information System (INIS)

Dziewinski, J.J.

1998-01-01

The cleanup of liquid streams contaminated with radionuclides is obtained by the selection or a combination of a number of physical and chemical separations, processes or unit operations. Among those are: Chemical treatment; Evaporation; Ion exchange and sorption; Physical separation; Electrodialysis; Osmosis; Electrocoagulation/electroflotation; Biotechnological processes; and Solvent extraction

Methodology for Designing Models Predicting Success of Infertility Treatment

OpenAIRE

Alireza Zarinara; Mohammad Mahdi Akhondi; Hojjat Zeraati; Koorsh Kamali; Kazem Mohammad

2016-01-01

Abstract Background: The prediction models for infertility treatment success have presented since 25 years ago. There are scientific principles for designing and applying the prediction models that is also used to predict the success rate of infertility treatment. The purpose of this study is to provide basic principles for designing the model to predic infertility treatment success. Materials and Methods: In this paper, the principles for developing predictive models are explained and...

Designing a fuzzy expert system for selecting knowledge management strategy

Directory of Open Access Journals (Sweden)

Ameneh Khadivar

2014-12-01

Full Text Available knowledge management strategy is mentioned as one of the most important success factors for implementing knowledge management. The KM strategy selection is a complex decision that requires consideration of several factors. For evaluation and selection of an appropriate knowledge management strategy in organizations, many factors must be considered. The identified factors and their impact on knowledge management strategy are inherently ambiguous. In this study, an overview of theoretical foundations of research regarding the different knowledge management strategies has been done And factors influencing the knowledge management strategy selection have been extracted from conceptual frameworks and models. How these factors influence the knowledge management strategy selection is extracted through the fuzzy Delphi. Next a fuzzy expert system for the selection of appropriate knowledge management strategy is designed with respect to factors that have an impact on knowledge management strategy. The factors which influence the selection of knowledge management strategy include: general business strategy, organizational structure, cultural factors, IT strategy, strategic human resource management, social level, the types of knowledge creation processes and release it. The factors which influence the knowledge management strategy selection include: business strategy general, organizational structure, cultural factors, IT strategy, human resource management strategies, socialization level, knowledge types and its creation and diffusion processes. According to identified factors which affect the knowledge management strategy, the final strategy is recommended based on the range of human-oriented and system-oriented by keep the balance of explicit and implicit knowledge. The Designed system performance is tested and evaluated by the information related to three Iranian organization.

A fuzzy logic urea dosage controller design for two-cell selective catalytic reduction systems.

Science.gov (United States)

You, Kun; Wei, Lijiang; Jiang, Kai

2017-12-22

Diesel engines have dominated in the heavy-duty vehicular and marine power source. However, the induced air pollution is a big problem. As people's awareness of environmental protection increasing, the emission regulations of diesel-engine are becoming more stringent. In order to achieve the emission regulations, the after-treatment system is a necessary choice. Specifically, the selective catalytic reduction (SCR) system has been widely applied to reduce the NO X emissions of diesel engine. Different from single-cell SCR systems, the two-cell systems have various benefits from the modeling and control perspective. In this paper, the urea dosage controller design for two-cell SCR systems was investigated. Firstly, the two-cell SCR modeling was introduced. Based on the developed model, the design procedure for the fuzzy logic urea dosage controller was well addressed. Secondly, simulations and comparisons were employed via an experimental verification of the whole vehicle simulator. And the results showed that the designed controller simultaneously achieved high NO X reduction rate and low tail-pipe ammonia slip. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Selection of low-risk design guidelines for energetic events

International Nuclear Information System (INIS)

Ferguson, D.; Marchaterre, J.; Graham, J.

1982-01-01

This paper recommends the establishment of specific design guidelines for protection against potential, but low-probability, energetic events. These guidelines recognize the plant protective features incorporated to prevent such events, as well as the inherent capability of the plant to accommodate a certain level of energy release. Further, their application is recommended within the context of necessary standardized and agreed-upon acceptance criteria which are less restrictive than ASME code requirements. The paper provides the background upon which the selection of the design is made, including the characterization of energetic events dependent on various core-design parameters, and including the necessity of a low-risk design balanced between prevention of accidents and the mitigation of consequences

Select Generic Dry-Storage Pilot Plant Design for Safeguards and Security by Design (SSBD) per Used Fuel Campaign

Energy Technology Data Exchange (ETDEWEB)

Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sprinkle, James K. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-05-26

As preparation to the year-end deliverable (Provide SSBD Best Practices for Generic Dry-Storage Pilot Scale Plant) for the Work Package (FT-15LA040501–Safeguards and Security by Design for Extended Dry Storage), the initial step was to select a generic dry-storage pilot plant design for SSBD. To be consistent with other DOE-NE Fuel Cycle Research and Development (FCR&D) activities, the Used Fuel Campaign was engaged for the selection of a design for this deliverable. For the work Package FT-15LA040501–“Safeguards and Security by Design for Extended Dry Storage”, SSBD will be initiated for the Generic Dry-Storage Pilot Scale Plant described by the layout of Reference 2. SSBD will consider aspects of the design that are impacted by domestic material control and accounting (MC&A), domestic security, and international safeguards.

Design parameters for waste effluent treatment unit from beverages production

Directory of Open Access Journals (Sweden)

Mona A. Abdel-Fatah

2017-09-01

Full Text Available Based on a successful experimental result from laboratory and bench scale for treatment of wastewater from beverages industry, an industrial and efficient treatment unit is designed and constructed. The broad goal of this study was to design and construct effluent, cost effective and high quality treatment unit. The used technology is the activated sludge process of extended aeration type followed by rapid sand filters and chlorination as tertiary treatment. Experimental results have been considered as the basis for full scale design of the industrial capacity of 1600 m3/day treatment plant. Final effluent characteristics after treatment comply with Egyptian legalizations after reducing COD and BOD5 by about 97% and 95% respectively. So it is recommended to reuse treated effluent in textile industry in dyeing process.

Improvement of selective removal of heavy metals in cyanobacteria by NaOH treatment.

Science.gov (United States)

Nagase, Hiroyasu; Inthorn, Duangrat; Oda, Aiko; Nishimura, Jun; Kajiwara, Yumiko; Park, Myong-Oku; Hirata, Kazumasa; Miyamoto, Kazuhisa

2005-04-01

In the freshwater cyanobacterium, Tolypothrix tenuis, treatment with 0.1 M NaOH increased its Cd-selective adsorption ability in the presence of Ca(2+) or Mg(2+). The selective adsorption was also achieved by other alkaline treatments. Energy-distributed spectroscopy analysis revealed that Cd(2+) was found mainly on the surface of non-treated cells, whereas it was distributed throughout the cell after NaOH treatment. The alkaline treatment was effective in increasing the selective adsorption ability of the cyanobacterium for other bivalent heavy metals such as Cu(2+), Pb(2+) and Zn(2+). The treatment was also applicable to Anabaena variabilis and Microcystis aeruginosa, which are typical cyanobacteria causing algal blooms. The main binding site of Cd(2+) in NaOH-treated cells is assumed to be the carboxyl groups because the binding ability of the cells was diminished by the esterification of carboxyl groups. These results suggest that alkaline treatment of cyanobacteria is a useful technique for producing biosorbents having highly specific binding abilities for heavy metals.

Treatment compliance and challenges among tuberculosis patients across selected health facilities in Osun State Nigeria.

Science.gov (United States)

Ajao, K O; Ogundun, O A; Afolabi, O T; Ojo, T O; Atiba, B P; Oguntunase, D O

2014-12-01

Tuberculosis (TB) is a major public health problem in the world and Africa has approximately one quarter of the world's cases. One of the greatest challenges facing most TB programmes is the non-compliance to TB treatment among TB patients. This study aimed at determining the challenges of management of tuberculosis (TB) across selected Osun State health facilities. The study employed a descriptive cross-sectional design. A semi-structured questionnaire was used to collect data from 102 TB patients in the health facilities. The instrument measured socio-demographic variables, patient related factors, socio-economic variables, health care system related factors to TB disease and treatment. Data were analysed and summarized using descriptive and inferential statistics. Statistical significance was placed at p facilities (χ2 = 21.761, p facility and patient-related factors were largely responsible.

Design Seminar for Land Treatment of Municipal Wastewater Effluents.

Science.gov (United States)

Demirjian, Y. A.

This document reports the development and operation of a country-wide wastewater treatment program. The program was designed to treat liquid wastewater by biological treatment in aerated lagoons, store it, and then spray irrigate on crop farmland during the growing season. The text discusses the physical design of the system, agricultural aspects,…

Trends in pharmacotherapy selection for the treatment of alcohol ...

African Journals Online (AJOL)

Background. The selection of pharmacotherapy for the treatment of alcohol withdrawal remains a clinical challenge. Research continues into the underlying pathophysiology of dependence and withdrawal. A spectrum of clinical presentations of alcohol dependence is emerging, yet recommendations and guidelines have ...

Selecting a pharmacy layout design using a weighted scoring system.

Science.gov (United States)

McDowell, Alissa L; Huang, Yu-Li

2012-05-01

A weighted scoring system was used to select a pharmacy layout redesign. Facilities layout design techniques were applied at a local hospital pharmacy using a step-by-step design process. The process involved observing and analyzing the current situation, observing the current available space, completing activity flow charts of the pharmacy processes, completing communication and material relationship charts to detail which areas in the pharmacy were related to one another and how they were related, researching applications in other pharmacies or in scholarly works that could be beneficial, numerically defining space requirements for areas within the pharmacy, measuring the available space within the pharmacy, developing a set of preliminary designs, and modifying preliminary designs so they were all acceptable to the pharmacy staff. To select a final layout that could be implemented in the pharmacy, those layouts were compared via a weighted scoring system. The weighted aspect further allowed additional emphasis on categories based on their effect on pharmacy performance. The results produced a beneficial layout design as determined through simulated models of the pharmacy operation that more effectively allocated and strategically located space to improve transportation distances and materials handling, employee utilization, and ergonomics. Facilities layout designs for a hospital pharmacy were evaluated using a weighted scoring system to identify a design that was superior to both the current layout and alternative layouts in terms of feasibility, cost, patient safety, employee safety, flexibility, robustness, transportation distance, employee utilization, objective adherence, maintainability, usability, and environmental impact.

Design parameters for waste effluent treatment unit from beverages production

OpenAIRE

Mona A. Abdel-Fatah; H.O. Sherif; S.I. Hawash

2017-01-01

Based on a successful experimental result from laboratory and bench scale for treatment of wastewater from beverages industry, an industrial and efficient treatment unit is designed and constructed. The broad goal of this study was to design and construct effluent, cost effective and high quality treatment unit. The used technology is the activated sludge process of extended aeration type followed by rapid sand filters and chlorination as tertiary treatment. Experimental results have been con...

How do intake clinicians use patient characteristics to select treatment for patients with personality disorders?

Science.gov (United States)

van Manen, Janine; Kamphuis, Jan Henk; Visbach, Geny; Ziegler, Uli; Gerritsen, Ad; Van Rossum, Bert; Rijnierse, Piet; Timman, Reinier; Verheul, Roel

2008-11-01

Treatment selection in clinical practice is a poorly understood, often largely implicit decision process, perhaps especially for patients with personality disorders. This study, therefore, investigated how intake clinicians use information about patient characteristics to select psychotherapeutic treatment for patients with personality disorder. A structured interview with a forced-choice format was administered to 27 experienced intake clinicians working in five specialist mental health care institutes in the Netherlands. Substantial consensus was evident among intake clinicians. The results revealed that none of the presented patient characteristics were deemed relevant for the selection of the suitable treatment setting. The appropriate duration and intensity are selected using severity or personal strength variables. The theoretical orientation is selected using personal strength variables.

Drawing up of a selection table of the most appropriate gas treatment coming from anthropogenical fixed sources emitted to the atmosphere

International Nuclear Information System (INIS)

Monge Calvo, Karla Maria

2000-01-01

This inform has like an general objective the creation of a reference table which allows to simplify the selection of the most appropriate treatment method for the gas decontamination emitted to the atmosphere. To go ahead with this job, it performed a bibliographic research of the different method's kinds: dry, humid, complementary and of gas's cleaning for gas and steams. Later, for to draw up the table, it was decided to treat different methodologies and equipment by aside, as well as to include variables of design like: kind of industry and emission, characteristics or properties of the particles, as well as answer variables among that includes: treatment's methods, advantages and disadvantages when it utilizes such equipment. This research is limited to theoretical studies and data. This study intent to be the first guide for to select the treatment's method for the decontamination most appropriate to the particular problem of every industry, since it was necessary a guide that allows to the user to identify the emissions treatment's methods and to apply them to the different contaminating industries, which at the same time it allows to take a quick and good decision, of the appropriate method, by means of a brief table that be easy to use. Seeing as the project is just theoretical, it wasn't possible to include a class of detail of the already installed equipment, since it didn't have measurements of the same. It doesn't cover the totality of cares, either that must be taken for the design of the different equipment suggested here, that's why for the final process's design it must be consulted other references. The advantage of the selection's table is that every equipment is treated by aside, which simplifies the appropriate method. Besides that allows to have a good idea of the suggested equipment's form thanks to the description and to the diagram that it contains. In order to use the table, is advised besides to consult different bibliographical sources

A Comparison of Multidimensional Item Selection Methods in Simple and Complex Test Designs

Directory of Open Access Journals (Sweden)

Eren Halil ÖZBERK

2017-03-01

Full Text Available In contrast with the previous studies, this study employed various test designs (simple and complex which allow the evaluation of the overall ability score estimations across multiple real test conditions. In this study, four factors were manipulated, namely the test design, number of items per dimension, correlation between dimensions and item selection methods. Using the generated item and ability parameters, dichotomous item responses were generated in by using M3PL compensatory multidimensional IRT model with specified correlations. MCAT composite ability score accuracy was evaluated using absolute bias (ABSBIAS, correlation and the root mean square error (RMSE between true and estimated ability scores. The results suggest that the multidimensional test structure, number of item per dimension and correlation between dimensions had significant effect on item selection methods for the overall score estimations. For simple structure test design it was found that V1 item selection has the lowest absolute bias estimations for both long and short tests while estimating overall scores. As the model gets complex KL item selection method performed better than other two item selection method.

Cast net design characteristics, catch composition and selectivity in ...

African Journals Online (AJOL)

Cast net design characteristics, construction, operational techniques and selectivity in Lagos lagoon, Nigeria was examined between September and December 2005. Netting materials for cast net construction in Lagos lagoon were monofilament nylon, poly-ethylene (PE) and polyester (PES). The conventional ratio 1:2 of ...

[Evaluation and selection of VOCs treatment technologies in packaging and printing industry].

Science.gov (United States)

Wang, Hai-Lin; Wang, Jun-Hui; Zhu, Chun-Lei; Nie, Lei; Hao, Zheng-Ping

2014-07-01

Volatile organic compounds (VOCs) play an important role in urban air pollution. Activities of industries including the packaging and printing industries are regarded as the major sources. How to select the suitable treating techniques is the major problem for emission control. In this article, based on the VOCs emission characteristics of the packaging and printing industry and the existing treatment technologies, using the analytic hierarchy process (AHP) model, an evaluation system for VOCs selection was established and all the technologies used for treatment were assessed. It showed that the priority selection was in the following order: Carbon Fiber Adsorption-Desorption > Granular Carbon Adsorption-Desorption > Thermal Combustion > Regenerative Combustion > Catalytic combustion > Rotary adsorption-concentration and combustion > Granular Carbon adsorption-concentration and combustion. Carbon Fiber Adsorption-Desorption was selected as the best available technology due to its highest weight among those technologies.

Systematic Methods in School Planning and Design. A Selected and Annotated Bibliography.

Science.gov (United States)

Murtha, D. Michael

A selection of technical reports, journal articles and books on various aspects of systematic methods for school planning and design, are presented in this bibliography. The subject areas include the design process in terms of--(1) practice, (2) theory, (3) methods, (4) decision systems, and (5) computer applications. Criteria for design with…

Modification of the Selectivity Properties of Tubular Ceramic Membranes after Alkaline Treatment

Directory of Open Access Journals (Sweden)

Patrick Dutournié

2017-11-01

Full Text Available This work focuses on the selectivity modification of ceramic membranes after a mild alkaline treatment. Filtration of pure salt-water solutions was carried out with commercial titania membranes before and after the treatment. After treatment, the rejection of NaF significantly decreased, while the rejection of NaCl and NaBr increased. Additionally, NaI and Na2SO4 remained close to zero. Pore size and electrical charge being almost unchanged, only significant modifications in the dielectric effects can explain this modification of selectivity. Therefore, the surface chemistry and the interaction (nature and magnitude with the solvent and with the species present in the solution appear to be modified by the alkaline treatment. This trend is also illustrated by discussing the electric and the dielectric properties that were numerically identified before and after treatment. The alkaline treatment significantly decreased the apparent dielectric constant of NaCl-water solution in the pore, highlighting the rejection of sodium chloride. Contrariwise, the modification of the surface chemistry increased the apparent dielectric constant of NaF-water solution by promoting fluoride transmission.

Reducing wrong patient selection errors: exploring the design space of user interface techniques.

Science.gov (United States)

Sopan, Awalin; Plaisant, Catherine; Powsner, Seth; Shneiderman, Ben

2014-01-01

Wrong patient selection errors are a major issue for patient safety; from ordering medication to performing surgery, the stakes are high. Widespread adoption of Electronic Health Record (EHR) and Computerized Provider Order Entry (CPOE) systems makes patient selection using a computer screen a frequent task for clinicians. Careful design of the user interface can help mitigate the problem by helping providers recall their patients' identities, accurately select their names, and spot errors before orders are submitted. We propose a catalog of twenty seven distinct user interface techniques, organized according to a task analysis. An associated video demonstrates eighteen of those techniques. EHR designers who consider a wider range of human-computer interaction techniques could reduce selection errors, but verification of efficacy is still needed.

IVF or IUI as first-line treatment in unexplained subfertility: the conundrum of treatment selection markers.

Science.gov (United States)

Tjon-Kon-Fat, R I; Tajik, P; Zafarmand, M H; Bensdorp, A J; Bossuyt, P M M; Oosterhuis, G J E; van Golde, R; Repping, S; Lambers, M D A; Slappendel, E; Perquin, D; Pelinck, M J; Gianotten, J; Maas, J W M; Eijkemans, M J C; van der Veen, F; Mol, B W; van Wely, M

2017-05-01

Are there treatment selection markers that could aid in identifying couples, with unexplained or mild male subfertility, who would have better chances of a healthy child with IVF with single embryo transfer (IVF-SET) than with IUI with ovarian stimulation (IUI-OS)? We did not find any treatment selection markers that were associated with better chances of a healthy child with IVF-SET instead of IUI-OS in couples with unexplained or mild male subfertility. A recent trial, comparing IVF-SET to IUI-OS, found no evidence of a difference between live birth rates and multiple pregnancy rates. It was suggested that IUI-OS should remain the first-line treatment instead of IVF-SET in couples with unexplained or mild male subfertility and female age between 18 and 38 years. The question remains whether there are some couples that may have higher pregnancy chances if treated with IVF-SET instead of IUI. We performed our analyses on data from the INeS trial, where couples with unexplained or mild male subfertility and an unfavourable prognosis for natural conception were randomly allocated to IVF-SET, IVF in a modified natural cycle or IUI-OS. In view of the aim of this study, we only used data of the comparison between IVF-SET (201 couples) and IUI-OS (207 couples). We pre-defined the following baseline characteristics as potential treatment selection markers: female age, ethnicity, smoking status, type of subfertility (primary/secondary), duration of subfertility, BMI, pre-wash total motile count and Hunault prediction score. For each potential treatment selection marker, we explored the association with the chances of a healthy child after IVF-SET and IUI-OS and tested if there was an interaction with treatment. Given the exploratory nature of our analysis, we used a P-value of 0.1. None of the markers were associated with higher chances of a healthy child from IVF-SET compared to IUI-OS (P-value for interaction >0.10). Since this is the first large study that looked at

Design of PR current control with selective harmonic compensators using Matlab

Directory of Open Access Journals (Sweden)

Daniel Zammit

2017-12-01

Full Text Available This paper presents a procedure to design a Proportional Resonant (PR current controller with additional PR selective harmonic compensators for Grid Connected Photovoltaic (PV Inverters. The design of the PR current control and the harmonic compensators will be carried out using Matlab. Testing was carried out on a 3 kW Grid-Connected PV Inverter which was designed and constructed for this research. Both simulation and experimental results will be presented. Keywords: Inverters, Proportional-resonant controllers, Harmonic compensation, Photovoltaic, Matlab, SISO design tool

Process Design of Wastewater Treatment for the NREL Cellulosic Ethanol Model

Energy Technology Data Exchange (ETDEWEB)

Steinwinder, T.; Gill, E.; Gerhardt, M.

2011-09-01

This report describes a preliminary process design for treating the wastewater from NREL's cellulosic ethanol production process to quality levels required for recycle. In this report Brown and Caldwell report on three main tasks: 1) characterization of the effluent from NREL's ammonia-conditioned hydrolyzate fermentation process; 2) development of the wastewater treatment process design; and 3) development of a capital and operational cost estimate for the treatment concept option. This wastewater treatment design was incorporated into NREL's cellulosic ethanol process design update published in May 2011 (NREL/TP-5100-47764).

RIP INPUT TABLES FROM WAPDEG FOR LA DESIGN SELECTION: ENHANCED DESIGN ALTERNATIVE V

International Nuclear Information System (INIS)

K. Mon

1999-01-01

The purpose of this calculation is to document (1) the Waste Package Degradation (WAPDEG) version 3.09 (CRWMS M and O 1998b, Software Routine Report for WAPDEG (Version 3.09)) simulations used to analyze degradation and failure of 2-cm thick titanium grade 7 corrosion resistant material (CRM) drip shields (that are placed over waste packages composed of a 2-cm thick Alloy 22 corrosion resistant material (CRM) as the outer barrier and an unspecified material to provide structural support as the inner barrier) as well as degradation and failure of the waste packages themselves, and (2) post-processing of these results into tables of drip shield/waste package degradation time histories suitable for use as input into the Integrated Probabilistic Simulator for Environmental Systems (RIP) version 5.19.01 (Golder Associates 1998) computer code. Performance credit of the inner barrier material is not taken in this calculation. This calculation supports Performance Assessment analysis of the License Application Design Selection (LADS) Enhanced Design Alternative V. Additional details concerning the Enhanced Design Alternative V are provided in a Design Input Request (CRWMS M and O 1999e, Design Input Request for LADS Phase II EDA Evaluations, Item 3)

MoDOT pavement preservation research program volume VI, pavement treatment trigger tables/decision trees and treatment candidate selection process.

Science.gov (United States)

2015-10-01

The objective of Task 5 was the development of pavement treatment trigger tables and the treatment candidate selection process. : The input to the trigger tables entails such factors as an overall condition indicator, smoothness, individual distress ...

Design of compliant mechanisms with selective compliance

International Nuclear Information System (INIS)

Hasse, Alexander; Campanile, Lucio Flavio

2009-01-01

Conventional mechanisms provide a defined mobility, which expresses the number of degrees of freedom of the mechanism. This allows the system to be driven by a low number of control outputs. This property is virtually retained in the case of compliant mechanisms with lumped compliance, which are obtained by replacing the conventional hinges by solid-state ones. Compliant mechanisms with distributed compliance have, in general, an infinite number of degrees of freedom and therefore cannot guarantee defined kinematics. In this paper the concept of compliant mechanisms with selective compliance is introduced. This special class of compliant mechanisms combines the advantages of distributed compliance with the easy controllability of systems with defined kinematics. The task is accomplished by introducing a new design criterion based on a modal formulation. After this design criterion has been implemented in an optimization formulation for a formal optimization procedure, mechanisms are obtained in which a freely chosen deformation pattern is associated with a low deformation energy while other deformation patterns are considerably stiffer. Besides the description of the modal design criterion and the associated objective function, the sensitivity analysis of the objective function is presented and an application example is shown

A data mining based model for selecting type of treatment for kidney stone patients

Directory of Open Access Journals (Sweden)

Sepehri MM

2009-09-01

Full Text Available "n Normal 0 false false false EN-US X-NONE AR-SA MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Background: Data mining as a multidisciplinary field is rooted in the fields such as statistics, mathematics, computer science and artificial intelligence and has been gaining momentum in scientific, managerial, and executive applications in health care. Data mining can be defined as the automated extraction of valuable, practical and hidden knowledge and information from large data. Applying data mining in medical records and data is of utmost importance for health care givers and providers and brings vital and valuable outcomes. Data mining can help doctors come up with better recommendations and plans for treatment which actually in many respects have significant impact on patients' life and satisfaction In this paper we have proposed and utilized data mining methods to extract hidden information in medical records of pelvis stone patients with ureteral stone. We have tried to design a decision support system model to be applicable for selecting type of treatment for these groups of patients."n"nMethods: We gathered needed information from Shahid Hashemi Nejad hospital. In this research we have used decision tree as a data mining tool, for selecting suitable treatment for patients with ureteral stone. This

Readability in reading materials selection and coursebook design for college English in China

OpenAIRE

Lu, Zhongshe

2002-01-01

This thesis studies the application of readability in reading materials selection and coursebook design for college English in an EFL context in China. Its aim is to develop rationales which coursebook writers can utilise in selecting materials as texts and as a basis for designing tasks. This study, through a combination of quantitative and qualitative research methods, argues that readability is applicable in the EFL Chinese context, and readability plays a important role in determining...

The selection of low-risk design guidelines for energetic events

International Nuclear Information System (INIS)

Fergusson, Donald; Marchaterre, John; Graham, John

1982-01-01

This paper recommends the establishment of specific design guidelines for protection against potential, but low probability, energetic events. These guidelines recognize the plant protective features incorporated to prevents such events, as well as the inherent capability of the plant to accommodate a certain level of energy release. Further, their application is recommended within the context of necessary standardized and agreed upon acceptance criteria which are less restrictive than ASME code requirements. The paper provides the background upon which the selection of the design is made, including the characterization of energetic events dependent on various core-design parameters, and including the necessity of a low-risk design balanced between prevention of accidents and the mitigation of consequences

The role of selective estrogen receptor modulators in the treatment of schizophrenia.

Science.gov (United States)

Bratek, Agnieszka; Krysta, Krzysztof; Drzyzga, Karolina; Barańska, Justyna; Kucia, Krzysztof

2016-09-01

Gender differences in schizophrenia have been recognized for a long time and it has been widely accepted that sex steroid hormones, especially estradiol, are strongly attributed to this fact. Two hypotheses regarding estradiol action in psychoses gained special research attention - the estrogen protection hypothesis and hypoestrogenism hypothesis. A growing number of studies have shown benefits in augmenting antipsychotic treatment with estrogens or selective estrogen receptor modulators (SERM). This review is focused on the role of selective estrogen receptor modulators in the treatment of schizophrenic patients. In order to achieve this result PubMed was searched using the following terms: schizophrenia, raloxifene, humans. We reviewed only randomized, placebo-controlled studies. Raloxifene, a selective estrogen receptor modulator was identified as useful to improve negative, positive, and general psychopathological symptoms, and also cognitive functions. All reviewed studies indicated improvement in at least one studied domain. Augmentation with raloxifene was found to be a beneficial treatment strategy for chronic schizophrenia both in female and male patients, however potential side effects (a small increase in the risk of venous thromboembolism and endometrial cancer) should be carefully considered. SERMs could be an effective augmentation strategy in the treatment of both men women with schizophrenia, although further research efforts are needed to study potential long-term side effects.

Selection of treatment and surgical approach for vestibular schwannomas

International Nuclear Information System (INIS)

Eguchi, Kuniki; Yamaguchi, Satoshi; Sakoda, Eiichiro

2007-01-01

Described are the present state of selection of stereotactic radiotherapy or surgical treatment and their combination for schwannomas in the title, and authors' policy of surgery as a first choice treatment. The policy stands on the concept that surgery is useful for the controllability thereafter of the tumor, of which size is at first larger than 25 mm diameter, and radiotherapy like a gamma-knife is applicable to the residual tissue grown after operation and to the tissue with less than the size before surgery because the smaller the size, the better is thought the control by the knife (reportedly 100% for the tissue of <14 mm diameter). The basis of authors' selection of two surgical approaches of through-lower lateral occiput and trans-labyrinthine, and their outcomes like hearing loss are described and discussed in details for 24 patients (two underwent radiotherapy before surgery) during the period Sep. 2003-Aug. 2006 of authors' hospital. Radiotherapy is thought essentially useful for the control of the tumor with a small or surgically reduced size. (R.T.)

Intradural approach to selective stimulation in the spinal cord for treatment of intractable pain: design principles and wireless protocol

Science.gov (United States)

Howard, M. A.; Utz, M.; Brennan, T. J.; Dalm, B. D.; Viljoen, S.; Jeffery, N. D.; Gillies, G. T.

2011-08-01

We introduce an intradural approach to spinal cord stimulation for the relief of intractable pain, and describe the biophysical rationale that underlies its design and performance requirements. The proposed device relies on wireless, inductive coupling between a pial surface implant and its epidural controller, and we present the results of benchtop experiments that demonstrate the ability to transmit and receive a frequency-modulated 1.6 MHz carrier signal between micro-coil antennae scaled to the ≈ 1 cm dimensions of the implant, at power levels of about 5 mW. Plans for materials selection, microfabrication, and other aspects of future development are presented and discussed.

Anhedonia Predicts Poorer Recovery among Youth with Selective Serotonin Reuptake Inhibitor Treatment-Resistant Depression

Science.gov (United States)

McMakin, Dana L.; Olino, Thomas M.; Porta, Giovanna; Dietz, Laura J.; Emslie, Graham; Clarke, Gregory; Wagner, Karen Dineen; Asarnow, Joan R.; Ryan, Neal D.; Birmaher, Boris; Shamseddeen, Wael; Mayes, Taryn; Kennard, Betsy; Spirito, Anthony; Keller, Martin; Lynch, Frances L.; Dickerson, John F.; Brent, David A.

2012-01-01

Objective: To identify symptom dimensions of depression that predict recovery among selective serotonin reuptake inhibitor (SSRI) treatment-resistant adolescents undergoing second-step treatment. Method: The Treatment of Resistant Depression in Adolescents (TORDIA) trial included 334 SSRI treatment-resistant youth randomized to a medication…

Design and selection of materials for sodium cooled fast reactors

International Nuclear Information System (INIS)

Chetal, S.C.

2011-01-01

Sodium cooled fast reactors are currently in operation, under construction or under design by a number of countries. The design of sodium cooled fast reactor is covered by French RCC - MR code and ASME code NH. The codes cover rules as regards to materials, design and construction. These codes do not cover the effect of irradiation and environment. Elevated temperature design criteria in nuclear codes are much stringent in comparison to non nuclear codes. Sodium corrosion is not an issue in selection of materials provided oxygen impurity in sodium is controlled for which excellent reactor operating experience is available. Austenitic stainless steels have remained the choice for the permanent structures of primary sodium system. Stabilized austenitic stainless steel are rejected because of poor operating experience and non inclusion in the design codes. Route for improved creep behaviour lies in compositional modifications in 316 class steel. However, the weldability needs to be ensured. For cold leg component is non creep regime, SS 304 class steel is favoured from overall economics. Enhanced fuel burn up can be realized by the use of 9-12%Cr 1%Mo class steel for the wrapper of MOX fuel design, and cladding and wrapper for metal fuel reactors. Minor compositional modifications of 20% cold worked 15Cr-15Ni class austenitic stainless steel will be a strong candidate for the cladding of MOX fuel design in the short term. Long term objective for the cladding will be to develop oxide dispersion strengthened steel. 9%Cr 1%Mo class steel (Gr 91) is an ideal choice for integrated once through sodium heated steam generators. One needs to incorporate operating experience from reactors and thermal power stations, industrial capability and R and D feedback in preparing the technical specifications for procurement of wrought products and welding consumables to ensure reliable operation of the components and systems over the design life. The paper highlights the design approach

Optimal design of regional wastewater pipelines and treatment plant systems.

Science.gov (United States)

Brand, Noam; Ostfeld, Avi

2011-01-01

This manuscript describes the application of a genetic algorithm model for the optimal design of regional wastewater systems comprised of transmission gravitational and pumping sewer pipelines, decentralized treatment plants, and end users of reclaimed wastewater. The algorithm seeks the diameter size of the designed pipelines and their flow distribution simultaneously, the number of treatment plants and their size and location, the pump power, and the required excavation work. The model capabilities are demonstrated through a simplified example application using base runs and sensitivity analyses. Scaling of the proposed methodology to real life wastewater collection and treatment plants design problems needs further testing and developments. The model is coded in MATLAB using the GATOOL toolbox and is available from the authors.

QDD: a user-friendly program to select microsatellite markers and design primers from large sequencing projects.

Science.gov (United States)

Meglécz, Emese; Costedoat, Caroline; Dubut, Vincent; Gilles, André; Malausa, Thibaut; Pech, Nicolas; Martin, Jean-François

2010-02-01

QDD is an open access program providing a user-friendly tool for microsatellite detection and primer design from large sets of DNA sequences. The program is designed to deal with all steps of treatment of raw sequences obtained from pyrosequencing of enriched DNA libraries, but it is also applicable to data obtained through other sequencing methods, using FASTA files as input. The following tasks are completed by QDD: tag sorting, adapter/vector removal, elimination of redundant sequences, detection of possible genomic multicopies (duplicated loci or transposable elements), stringent selection of target microsatellites and customizable primer design. It can treat up to one million sequences of a few hundred base pairs in the tag-sorting step, and up to 50,000 sequences in a single input file for the steps involving estimation of sequence similarity. QDD is freely available under the GPL licence for Windows and Linux from the following web site: http://www.univ-provence.fr/gsite/Local/egee/dir/meglecz/QDD.html. Supplementary data are available at Bioinformatics online.

Treating Selective Mutism Using Modular CBT for Child Anxiety: A Case Study

Science.gov (United States)

Reuther, Erin T.; Davis, Thompson E., III; Moree, Brittany N.; Matson, Johnny L.

2011-01-01

Selective mutism is a rare, debilitating condition usually seen in children. Unfortunately, there is little research examining effective treatments for this disorder, and designing an evidence-based treatment plan can be difficult. This case study presents the evidence-based treatment of an 8-year-old Caucasian boy with selective mutism using an…

Computational design of selective peptides to discriminate between similar PDZ domains in an oncogenic pathway.

Science.gov (United States)

Zheng, Fan; Jewell, Heather; Fitzpatrick, Jeremy; Zhang, Jian; Mierke, Dale F; Grigoryan, Gevorg

2015-01-30

Reagents that target protein-protein interactions to rewire signaling are of great relevance in biological research. Computational protein design may offer a means of creating such reagents on demand, but methods for encoding targeting selectivity are sorely needed. This is especially challenging when targeting interactions with ubiquitous recognition modules--for example, PDZ domains, which bind C-terminal sequences of partner proteins. Here we consider the problem of designing selective PDZ inhibitor peptides in the context of an oncogenic signaling pathway, in which two PDZ domains (NHERF-2 PDZ2-N2P2 and MAGI-3 PDZ6-M3P6) compete for a receptor C-terminus to differentially modulate oncogenic activities. Because N2P2 has been shown to increase tumorigenicity and M3P6 to decreases it, we sought to design peptides that inhibit N2P2 without affecting M3P6. We developed a structure-based computational design framework that models peptide flexibility in binding yet is efficient enough to rapidly analyze tradeoffs between affinity and selectivity. Designed peptides showed low-micromolar inhibition constants for N2P2 and no detectable M3P6 binding. Peptides designed for reverse discrimination bound M3P6 tighter than N2P2, further testing our technology. Experimental and computational analysis of selectivity determinants revealed significant indirect energetic coupling in the binding site. Successful discrimination between N2P2 and M3P6, despite their overlapping binding preferences, is highly encouraging for computational approaches to selective PDZ targeting, especially because design relied on a homology model of M3P6. Still, we demonstrate specific deficiencies of structural modeling that must be addressed to enable truly robust design. The presented framework is general and can be applied in many scenarios to engineer selective targeting. Copyright © 2014 Elsevier Ltd. All rights reserved.

Optimizing trial design in pharmacogenetics research: comparing a fixed parallel group, group sequential, and adaptive selection design on sample size requirements.

Science.gov (United States)

Boessen, Ruud; van der Baan, Frederieke; Groenwold, Rolf; Egberts, Antoine; Klungel, Olaf; Grobbee, Diederick; Knol, Mirjam; Roes, Kit

2013-01-01

Two-stage clinical trial designs may be efficient in pharmacogenetics research when there is some but inconclusive evidence of effect modification by a genomic marker. Two-stage designs allow to stop early for efficacy or futility and can offer the additional opportunity to enrich the study population to a specific patient subgroup after an interim analysis. This study compared sample size requirements for fixed parallel group, group sequential, and adaptive selection designs with equal overall power and control of the family-wise type I error rate. The designs were evaluated across scenarios that defined the effect sizes in the marker positive and marker negative subgroups and the prevalence of marker positive patients in the overall study population. Effect sizes were chosen to reflect realistic planning scenarios, where at least some effect is present in the marker negative subgroup. In addition, scenarios were considered in which the assumed 'true' subgroup effects (i.e., the postulated effects) differed from those hypothesized at the planning stage. As expected, both two-stage designs generally required fewer patients than a fixed parallel group design, and the advantage increased as the difference between subgroups increased. The adaptive selection design added little further reduction in sample size, as compared with the group sequential design, when the postulated effect sizes were equal to those hypothesized at the planning stage. However, when the postulated effects deviated strongly in favor of enrichment, the comparative advantage of the adaptive selection design increased, which precisely reflects the adaptive nature of the design. Copyright © 2013 John Wiley & Sons, Ltd.

Base Stabilization Guidance and Additive Selection for Pavement Design and Rehabilitation

Science.gov (United States)

2017-12-01

Significant improvements have been made in base stabilization practice that include design specifications and methodology, experience with the selection of stabilizing additives, and equipment for distribution and uniform blending of additives. For t...

Principles for selecting earthquake motions in engineering design of large dams

Science.gov (United States)

Krinitzsky, E.L.; Marcuson, William F.

1983-01-01

This report gives a synopsis of the various tools and techniques used in selecting earthquake ground motion parameters for large dams. It presents 18 charts giving newly developed relations for acceleration, velocity, and duration versus site earthquake intensity for near- and far-field hard and soft sites and earthquakes having magnitudes above and below 7. The material for this report is based on procedures developed at the Waterways Experiment Station. Although these procedures are suggested primarily for large dams, they may also be applicable for other facilities. Because no standard procedure exists for selecting earthquake motions in engineering design of large dams, a number of precautions are presented to guide users. The selection of earthquake motions is dependent on which one of two types of engineering analyses are performed. A pseudostatic analysis uses a coefficient usually obtained from an appropriate contour map; whereas, a dynamic analysis uses either accelerograms assigned to a site or specified respunse spectra. Each type of analysis requires significantly different input motions. All selections of design motions must allow for the lack of representative strong motion records, especially near-field motions from earthquakes of magnitude 7 and greater, as well as an enormous spread in the available data. Limited data must be projected and its spread bracketed in order to fill in the gaps and to assure that there will be no surprises. Because each site may have differing special characteristics in its geology, seismic history, attenuation, recurrence, interpreted maximum events, etc., as integrated approach gives best results. Each part of the site investigation requires a number of decisions. In some cases, the decision to use a 'least ork' approach may be suitable, simply assuming the worst of several possibilities and testing for it. Because there are no standard procedures to follow, multiple approaches are useful. For example, peak motions at

When to Intervene in Selective Mutism: The Multimodal Treatment of a Case of Persistent Selective Mutism.

Science.gov (United States)

Powell, Shawn; Dalley, Mahlono

1995-01-01

An identification and treatment model differentiating transient mutism from persistent selective mutism is proposed. The case study of a six-year-old girl is presented, who was treated with a multimodal approach combining behavioral techniques with play therapy and family involvement. At posttreatment and follow-up, she was talking in a manner…

Endoscopic bronchial valve treatment: patient selection and special considerations

Directory of Open Access Journals (Sweden)

Eberhardt R

2015-10-01

Full Text Available Ralf Eberhardt,1,2 Daniela Gompelmann,1,2 Felix JF Herth,1,2 Maren Schuhmann1 1Pneumology and Critical Care Medicine, Thoraxklinik at the University of Heidelberg, 2Translational Lung Research Center, Member of the German Center for Lung Research, Heidelberg, Germany Abstract: As well as lung volume reduction surgery, different minimally invasive endoscopic techniques are available to achieve lung volume reduction in patients with severe emphysema and significant hyperinflation. Lung function parameters and comorbidities of the patient, as well as the extent and distribution of the emphysema are factors to be considered when choosing the patient and the intervention. Endoscopic bronchial valve placement with complete occlusion of one lobe in patients with heterogeneous emphysema is the preferred technique because of its reversibility. The presence of high interlobar collateral ventilation will hinder successful treatment; therefore, endoscopic coil placement, polymeric lung volume reduction, or bronchoscopic thermal vapor ablation as well as lung volume reduction surgery can be used for treating patients with incomplete fissures. The effect of endoscopic lung volume reduction in patients with a homogeneous distribution of emphysema is still unclear and this subgroup should be treated only in clinical trials. Precise patient selection is necessary for interventions and to improve the outcome and reduce the risk and possible complications. Therefore, the patients should be discussed in a multidisciplinary approach prior to determining the most appropriate treatment for lung volume reduction. Keywords: lung emphysema, valve treatment, collateral ventilation, patient selection, outcome

Design of Nonuniform Filter Bank Transceivers for Frequency Selective Channels

Directory of Open Access Journals (Sweden)

Yuan-Pei Lin

2007-01-01

Full Text Available In recent years, there has been considerable interest in the theory and design of filter bank transceivers due to their superior frequency response. In many applications, it is desired to have transceivers that can support multiple services with different incoming data rates and different quality-of-service requirements. To meet these requirements, we can either do resource allocation or design transceivers with a nonuniform bandwidth partition. In this paper, we propose a method for the design of nonuniform filter bank transceivers for frequency selective channels. Both frequency response and signal-to-interference ratio (SIR can be incorporated in the transceiver design. Moreover, the technique can be extended to the case of nonuniform filter bank transceivers with rational sampling factors. Simulation results show that nonuniform filter bank transceivers with good filter responses as well as high SIR can be obtained by the proposed design method.

License Application Design Selection Feature Report: Waste Package Self Shielding Design Feature 13

International Nuclear Information System (INIS)

Tang, J.S.

2000-01-01

In the Viability Assessment (VA) reference design, handling of waste packages (WPs) in the emplacement drifts is performed remotely, and human access to the drifts is precluded when WPs are present. This report will investigate the feasibility of using a self-shielded WP design to reduce the radiation levels in the emplacement drifts to a point that, when coupled with ventilation, will create an acceptable environment for human access. This provides the benefit of allowing human entry to emplacement drifts to perform maintenance on ground support and instrumentation, and carry out performance confirmation activities. More direct human control of WP handling and emplacement operations would also be possible. However, these potential benefits must be weighed against the cost of implementation, and potential impacts on pre- and post-closure performance of the repository and WPs. The first section of this report will provide background information on previous investigations of the self-shielded WP design feature, summarize the objective and scope of this document, and provide quality assurance and software information. A shielding performance and cost study that includes several candidate shield materials will then be performed in the subsequent section to allow selection of two self-shielded WP design options for further evaluation. Finally, the remaining sections will evaluate the impacts of the two WP self-shielding options on the repository design, operations, safety, cost, and long-term performance of the WPs with respect to the VA reference design

Selective release of phosphorus and nitrogen from waste activated sludge with combined thermal and alkali treatment.

Science.gov (United States)

Kim, Minwook; Han, Dong-Woo; Kim, Dong-Jin

2015-08-01

Selective release characteristics of phosphorus and nitrogen from waste activated sludge (WAS) were investigated during combined thermal and alkali treatment. Alkali (0.001-1.0N NaOH) treatment and combined thermal-alkali treatment were applied to WAS for releasing total P(T-P) and total nitrogen(T-N). Combined thermal-alkali treatment released 94%, 76%, and 49% of T-P, T-N, and COD, respectively. Release rate was positively associated with NaOH concentration, while temperature gave insignificant effect. The ratio of T-N and COD to T-P that released with alkali treatment ranged 0.74-0.80 and 0.39-0.50, respectively, while combined thermal-alkali treatment gave 0.60-0.90 and 0.20-0.60, respectively. Selective release of T-P and T-N was negatively associated with NaOH. High NaOH concentration created cavities on the surface of WAS, and these cavities accelerated the release rate, but reduced selectivity. Selective release of P and N from sludge has a beneficial effect on nutrient recovery with crystallization processes and it can also enhance methane production. Copyright © 2015 Elsevier Ltd. All rights reserved.

Highly selective electrocoagulation therapy: an innovative treatment for lymphangioma circumscriptum.

Science.gov (United States)

Yang, Xi; Jin, Yunbo; Chen, Hui; Li, Suolan; Ma, Gang; Hu, Xiaojie; Qiu, Yajing; Yu, Wenxin; Chang, Lei; Wang, Tianyou; Lin, Xiaoxi

2014-08-01

Lymphangioma circumscriptum (LC) is a type of microcystic lymphatic malformation involving the skin and mucosa that presents as translucent vesicles of varying size with a pink, red, or black hue. Lymphangioma circumscriptum causes not only cosmetic problems but also refractory rupture, infection, lymphorrhea, and bleeding. Various invasive methods, such as surgical excision, lasers, and sclerotherapy, have been used in the past to treat LC with varying success. Herein, we report a new treatment for the management of LC. This study reports the outcomes of 12 patients (aged 4-31 years) with LC treated by electrocoagulation using a special isolated needle. Patient demographics, lesion characteristics, radiologic findings, treatment course, and clinical responses are recorded. All 12 patients who were treated with the highly selective electrocoagulation therapy achieved near-complete clearance. Minimal intra- and postoperative sequelae were observed. The local complications included mild pain (n = 9), proliferous scarring (n = 1), and ulceration (n = 1) with no systemic side effects. The mean follow-up period was 8.25 months (3-14 months). Highly selective electrocoagulation therapy is an innovative, minimally invasive technique that seems to be safe and effective for the treatment of LC; the results from our limited study population seem promising, and the observed complications are acceptable.

Selecting and Improving Quasi-Experimental Designs in Effectiveness and Implementation Research.

Science.gov (United States)

Handley, Margaret A; Lyles, Courtney R; McCulloch, Charles; Cattamanchi, Adithya

2018-04-01

Interventional researchers face many design challenges when assessing intervention implementation in real-world settings. Intervention implementation requires holding fast on internal validity needs while incorporating external validity considerations (such as uptake by diverse subpopulations, acceptability, cost, and sustainability). Quasi-experimental designs (QEDs) are increasingly employed to achieve a balance between internal and external validity. Although these designs are often referred to and summarized in terms of logistical benefits, there is still uncertainty about (a) selecting from among various QEDs and (b) developing strategies to strengthen the internal and external validity of QEDs. We focus here on commonly used QEDs (prepost designs with nonequivalent control groups, interrupted time series, and stepped-wedge designs) and discuss several variants that maximize internal and external validity at the design, execution and implementation, and analysis stages.

Design of a spin-wave majority gate employing mode selection

Energy Technology Data Exchange (ETDEWEB)

Klingler, S., E-mail: klingler@physik.uni-kl.de; Pirro, P.; Brächer, T.; Leven, B.; Hillebrands, B.; Chumak, A. V. [Fachbereich Physik and Landesforschungszentrum OPTIMAS, Technische Universität Kaiserslautern, 67663 Kaiserslautern (Germany)

2014-10-13

The design of a microstructured, fully functional spin-wave majority gate is presented and studied using micromagnetic simulations. This all-magnon logic gate consists of three-input waveguides, a spin-wave combiner, and an output waveguide. In order to ensure the functionality of the device, the output waveguide is designed to perform spin-wave mode selection. We demonstrate that the gate evaluates the majority of the input signals coded into the spin-wave phase. Moreover, the all-magnon data processing device is used to perform logic AND-, OR-, NAND-, and NOR- operations.

Conceptual design of tritium treatment facility

International Nuclear Information System (INIS)

Tachikawa, Katsuhiro

1982-01-01

In connection with the development of fusion reactors, the development of techniques concerning tritium fuel cycle, such as the refining and circulation of fuel, the recovery of tritium from blanket, waste treatment and safe handling, is necessary. In Japan Atomic Energy Research Institute, the design of the tritium process research laboratory has been performed since fiscal 1977, in which the following research is carried out: 1) development of hydrogen isotope separation techniques by deep cooling distillation method and thermal diffusion method, 2) development of the refining, collection and storage techniques for tritium using metallic getters and palladium-silver alloy films, and 3) development of the safe handling techniques for tritium. The design features of this facility are explained, and the design standard for radiation protection is shown. At present, in the detailed design stage, the containment of tritium and safety analysis are studied. The building is of reinforced concrete, and the size is 48 m x 26 m. Glove boxes and various tritium-removing facilities are installed in two operation rooms. Multiple wall containment system and tritium-removing facilities are explained. (Kako, I.)

Characterization of selectively etched halloysite nanotubes by acid treatment

Science.gov (United States)

Garcia-Garcia, Daniel; Ferri, Jose M.; Ripoll, Laura; Hidalgo, Montserrat; Lopez-Martinez, Juan; Balart, Rafael

2017-11-01

Halloysite nanotubes (HNTs) are a type of naturally occurring inorganic nanotubes that are characterized by a different composition between their external and internal walls. The internal walls are mainly composed of alumina whilst external walls are composed of silica. This particular structure offers a dual surface chemistry that allows different selective surface treatments which can be focused on increasing the lumen, increasing porosity, etc. In this work, HNTs were chemically treated with different acids (sulphuric, acetic and acrylic acid), for 72 h at a constant temperature of 50 °C. As per the obtained results, the treatment with sulphuric acid is highly aggressive and the particular shape of HNTs is almost lost, with a remarkable increase in porosity. The BET surface area increases from 52.9 (untreated HNTs) up to 132.4 m2 g-1 with sulphuric acid treatment, thus showing an interesting potential in the field of catalysis. On the other hand, the treatment with acetic acid led to milder effects with a noticeable increase in the lumen diameter that changed from 13.8 nm (untreated HNTs) up to 18.4 nm which the subsequent increase in the loading capacity by 77.8%. The aluminium content was measured by X-ray fluorescence (XRF) and laser induced breakdown spectroscopy (LIBS). The final results using two systems, suggest a good correlation between the acid strength and the aluminium reduction. Consequently, is possible to conclude that new applications for HNTs can be derived from selective etching with acids. Sulphuric acid widens the potential of HNTs in the field of catalysis while weak acids such as acetic and acrylic acids give a controlled and homogeneous lumen increase with the corresponding increase in the loading capacity.

Advanced Off-Gas Control System Design For Radioactive And Mixed Waste Treatment

International Nuclear Information System (INIS)

Nick Soelberg

2005-01-01

Treatment of radioactive and mixed wastes is often required to destroy or immobilize hazardous constituents, reduce waste volume, and convert the waste to a form suitable for final disposal. These kinds of treatments usually evolve off-gas. Air emission regulations have become increasingly stringent in recent years. Mixed waste thermal treatment in the United States is now generally regulated under the Hazardous Waste Combustor (HWC) Maximum Achievable Control Technology (MACT) standards. These standards impose unprecedented requirements for operation, monitoring and control, and emissions control. Off-gas control technologies and system designs that were satisfactorily proven in mixed waste operation prior to the implementation of new regulatory standards are in some cases no longer suitable in new mixed waste treatment system designs. Some mixed waste treatment facilities have been shut down rather than have excessively restrictive feed rate limits or facility upgrades to comply with the new standards. New mixed waste treatment facilities in the U. S. are being designed to operate in compliance with the HWC MACT standards. Activities have been underway for the past 10 years at the INL and elsewhere to identify, develop, demonstrate, and design technologies for enabling HWC MACT compliance for mixed waste treatment facilities. Some specific off-gas control technologies and system designs have been identified and tested to show that even the stringent HWC MACT standards can be met, while minimizing treatment facility size and cost

Advanced Mixed Waste Treatment Project melter system preliminary design technical review meeting

Energy Technology Data Exchange (ETDEWEB)

Eddy, T.L.; Raivo, B.D.; Soelberg, N.R.; Wiersholm, O.

1995-02-01

The Idaho National Engineering Laboratory Advanced Mixed Waste Treatment Project sponsored a plasma are melter technical design review meeting to evaluate high-temperature melter system configurations for processing heterogeneous alpha-contaminated low-level radioactive waste (ALLW). Thermal processing experts representing Department of Energy contractors, the Environmental Protection Agency, and private sector companies participated in the review. The participants discussed issues and evaluated alternative configurations for three areas of the melter system design: plasma torch melters and graphite arc melters, offgas treatment options, and overall system configuration considerations. The Technical Advisory Committee for the review concluded that graphite arc melters are preferred over plasma torch melters for processing ALLW. Initiating involvement of stakeholders was considered essential at this stage of the design. For the offgas treatment system, the advisory committee raised the question whether to a use wet-dry or a dry-wet system. The committee recommended that the waste stream characterization, feed preparation, and the control system are essential design tasks for the high-temperature melter treatment system. The participants strongly recommended that a complete melter treatment system be assembled to conduct tests with nonradioactive surrogate waste material. A nonradioactive test bed would allow for inexpensive design and operational changes prior to assembling a system for radioactive waste treatment operations.

Advanced Mixed Waste Treatment Project melter system preliminary design technical review meeting

International Nuclear Information System (INIS)

Eddy, T.L.; Raivo, B.D.; Soelberg, N.R.; Wiersholm, O.

1995-02-01

The Idaho National Engineering Laboratory Advanced Mixed Waste Treatment Project sponsored a plasma are melter technical design review meeting to evaluate high-temperature melter system configurations for processing heterogeneous alpha-contaminated low-level radioactive waste (ALLW). Thermal processing experts representing Department of Energy contractors, the Environmental Protection Agency, and private sector companies participated in the review. The participants discussed issues and evaluated alternative configurations for three areas of the melter system design: plasma torch melters and graphite arc melters, offgas treatment options, and overall system configuration considerations. The Technical Advisory Committee for the review concluded that graphite arc melters are preferred over plasma torch melters for processing ALLW. Initiating involvement of stakeholders was considered essential at this stage of the design. For the offgas treatment system, the advisory committee raised the question whether to a use wet-dry or a dry-wet system. The committee recommended that the waste stream characterization, feed preparation, and the control system are essential design tasks for the high-temperature melter treatment system. The participants strongly recommended that a complete melter treatment system be assembled to conduct tests with nonradioactive surrogate waste material. A nonradioactive test bed would allow for inexpensive design and operational changes prior to assembling a system for radioactive waste treatment operations

Review on Selection and Suitability of Rail Transit Station Design Pertaining to Public Safety

Science.gov (United States)

Akabal, Farah Mohd; Masirin, Mohd Idrus Haji Mohd; Abidin Akasah, Zainal; Rohani, Munzilah Md

2017-08-01

Railway has emerged as a fast, convenient, safe, clean, and low-cost alternative to air and road transportation. Many countries have invested in rail transportation. In America, Europe and Asia, large investments are planned for rail transportation. This is because congestion problems can be reduced with the introduction of rail transportation. Rail transportation involves several components which are important to ensure the smooth and safe delivery of services such as locomotives, rail stations and railway tracks. Rail transit stations are places where trains stop to pick-up and drop-off passengers. Stations are vital for many to enable them to engage in work and social commitments. This paper focuses only on the rail transit station as it is one of the important components in rail transportation. It is also considered as a key public meeting place and space for interactions in a community. The role of rail transit station and the requirements of a good rail transit station are also described in this paper. Steps in selecting the location of rail transit station include the function and facilities in rail transit station are discussed with reference to best practices and handbooks. Selection of the appropriate rail transit station locations may help users indirectly. In addition, this paper will also elucidate on the design considerations for an efficient and effective rail transit station. Design selections for the rail transit station must be balanced between aesthetic value and functional efficiency. The right design selection may help conserve energy, assure and facilitate consumers even thought a rail transit station plays a smaller role in attracting consumers compared to a shopping complex or a residential building. This will contribute towards better and greener building for a green transportation facility. Thus, with this paper it is expected to assist the relevant authority to identify important elements in the selection and determination of suitable

Treatment of Selective Serotonin Reuptake Inhibitor-Resistant Depression in Adolescents: Predictors and Moderators of Treatment Response

Science.gov (United States)

Asarnow, Joan Rosenbaum; Emslie, Graham; Clarke, Greg; Wagner, Karen Dineen; Spirito, Anthony; Vitiello, Benedetto; Iyengar, Satish; Shamseddeen, Wael; Ritz, Louise; Birmaher, Boris; Ryan, Neal; Kennard, Betsy; Mayes, Taryn; DeBar, Lynn; McCracken, James; Strober, Michael; Suddath, Robert; Leonard, Henrietta; Porta, Giovanna; Keller, Martin; Brent, David

2009-01-01

Adolescents who did not improve with Selective Serotonin Reuptake Inhibitor (SSRI) were provided an alternative SSRI plus cognitive-behavioral therapy (CBT). The superiority of the CBT/combined treatment as compared to medication alone is more evident in youths who had more comorbid disorders, no abuse history, and lower hopelessness.

Effect of Tetracycline Dose and Treatment Mode on Selection of Resistant Coliform Bacteria in Nursery Pigs

Science.gov (United States)

Græsbøll, Kaare; Damborg, Peter; Mellerup, Anders; Herrero-Fresno, Ana; Larsen, Inge; Holm, Anders; Nielsen, Jens Peter; Christiansen, Lasse Engbo; Angen, Øystein; Ahmed, Shahana

2017-01-01

ABSTRACT This study describes the results of a randomized clinical trial investigating the effect of oxytetracycline treatment dose and mode of administration on the selection of antibiotic-resistant coliform bacteria in fecal samples from nursery pigs. Nursery pigs (pigs of 4 to 7 weeks of age) in five pig herds were treated with oxytetracycline for Lawsonia intracellularis-induced diarrhea. Each group was randomly allocated to one of five treatment groups: oral flock treatment with a (i) high (20 mg/kg of body weight), (ii) medium (10 mg/kg), or (iii) low (5 mg/kg) dose, (iv) oral pen-wise (small-group) treatment (10 mg/kg), and (v) individual intramuscular injection treatment (10 mg/kg). All groups were treated once a day for 5 days. In all groups, treatment caused a rise in the numbers and proportions of tetracycline-resistant coliform bacteria right after treatment, followed by a significant drop by the time that the pigs left the nursery unit. The counts and proportions of tetracycline-resistant coliforms did not vary significantly between treatment groups, except immediately after treatment, when the highest treatment dose resulted in the highest number of resistant coliforms. A control group treated with tiamulin did not show significant changes in the numbers or proportions of tetracycline-resistant coliforms. Selection for tetracycline-resistant coliforms was significantly correlated to selection for ampicillin- and sulfonamide-resistant strains but not to selection for cefotaxime-resistant strains. In conclusion, the difference in the dose of oxytetracycline and the way in which the drug was applied did not cause significantly different levels of selection of tetracycline-resistant coliform bacteria under the conditions tested. IMPORTANCE Antimicrobial resistance is a global threat to human health. Treatment of livestock with antimicrobials has a direct impact on this problem, and there is a need to improve the ways that we use antimicrobials in

Effect of Tetracycline Dose and Treatment Mode on Selection of Resistant Coliform Bacteria in Nursery Pigs.

Science.gov (United States)

Græsbøll, Kaare; Damborg, Peter; Mellerup, Anders; Herrero-Fresno, Ana; Larsen, Inge; Holm, Anders; Nielsen, Jens Peter; Christiansen, Lasse Engbo; Angen, Øystein; Ahmed, Shahana; Folkesson, Anders; Olsen, John Elmerdahl

2017-06-15

This study describes the results of a randomized clinical trial investigating the effect of oxytetracycline treatment dose and mode of administration on the selection of antibiotic-resistant coliform bacteria in fecal samples from nursery pigs. Nursery pigs (pigs of 4 to 7 weeks of age) in five pig herds were treated with oxytetracycline for Lawsonia intracellularis -induced diarrhea. Each group was randomly allocated to one of five treatment groups: oral flock treatment with a (i) high (20 mg/kg of body weight), (ii) medium (10 mg/kg), or (iii) low (5 mg/kg) dose, (iv) oral pen-wise (small-group) treatment (10 mg/kg), and (v) individual intramuscular injection treatment (10 mg/kg). All groups were treated once a day for 5 days. In all groups, treatment caused a rise in the numbers and proportions of tetracycline-resistant coliform bacteria right after treatment, followed by a significant drop by the time that the pigs left the nursery unit. The counts and proportions of tetracycline-resistant coliforms did not vary significantly between treatment groups, except immediately after treatment, when the highest treatment dose resulted in the highest number of resistant coliforms. A control group treated with tiamulin did not show significant changes in the numbers or proportions of tetracycline-resistant coliforms. Selection for tetracycline-resistant coliforms was significantly correlated to selection for ampicillin- and sulfonamide-resistant strains but not to selection for cefotaxime-resistant strains. In conclusion, the difference in the dose of oxytetracycline and the way in which the drug was applied did not cause significantly different levels of selection of tetracycline-resistant coliform bacteria under the conditions tested. IMPORTANCE Antimicrobial resistance is a global threat to human health. Treatment of livestock with antimicrobials has a direct impact on this problem, and there is a need to improve the ways that we use antimicrobials in livestock

Materials selection in mechanical design

International Nuclear Information System (INIS)

Ashby, M.F.; Cebon, D.

1993-01-01

A novel materials-selection procedure has been developed and implemented in software. The procedure makes use of Materials Selection Charts: a new way of displaying material property data; and performance indices: combinations of material properties which govern performance. Optimisation methods are employed for simultaneous selection of both material and shape. (orig.)

Materials selection in mechanical design

OpenAIRE

Ashby , M.; Cebon , D.

1993-01-01

A novel materials-selection procedure has been developed and implemented in software. The procedure makes use of Materials Selection Charts: a new way of displaying material property data; and performance indices: combinations of material properties which govern performance. Optimisation methods are employed for simultaneous selection of both material and shape.

Safety approach to the selection of design criteria for the CRBRP reactor refueling system

International Nuclear Information System (INIS)

Meisl, C.J.; Berg, G.E.; Sharkey, N.F.

1979-01-01

The selection of safety design criteria for Liquid Metal Fast Breeder Reactor (LMFBR) refueling systems required the extrapolation of regulations and guidelines intended for Light Water Reactor refueling systems and was encumbered by the lack of benefit from a commercially licensed predecessor other than Fermi. The overall approach and underlying logic are described for developing safety design criteria for the reactor refueling system (RRS) of the Clinch River Breeder Reactor Plant (CRBRP). The complete selection process used to establish the criteria is presented, from the definition of safety functions to the finalization of safety design criteria in the appropriate documents. The process steps are illustrated by examples

The Development of Computer-Aided Design for Electrical Equipment Selection and Arrangement of 10 Kv Switchgear

Directory of Open Access Journals (Sweden)

Chernaya Anastassiya

2015-01-01

Full Text Available The paper intends to give an overview of a computer-aided design program application. The research includes two main parts: the development of a computer-aided design for an appropriate switchgear selection and its arrangement in an indoor switchgear layout. Matlab program was used to develop a computer-aided design system. The use of this program considerably simplifies the selection and arrangement of 10 kV switchgear.

A Modular Flow Design for the meta‐Selective C−H Arylation of Anilines

Science.gov (United States)

Gemoets, Hannes P. L.; Laudadio, Gabriele; Verstraete, Kirsten; Hessel, Volker

2017-01-01

Abstract Described herein is an effective and practical modular flow design for the meta‐selective C−H arylation of anilines. The design consists of four continuous‐flow modules (i.e., diaryliodonium salt synthesis, meta‐selective C−H arylation, inline copper extraction, and aniline deprotection) which can be operated either individually or consecutively to provide direct access to meta‐arylated anilines. With a total residence time of 1 hour, the desired product could be obtained in high yield and excellent purity without the need for column chromatography, and the residual copper content meets the standards for parenterally administered pharmaceutical substances. PMID:28543979

Holmium laser use in the treatment of selected dry eye syndrome complications

Science.gov (United States)

Kecik, Dariusz; Kecik, Tadeusz; Kasprzak, Jan; Kecik, Mariusz

1996-03-01

The authors present initial results of treatment selected complications of dry eye syndrome with holmium laser. The lacrimal puncta obliteration and coagulation of the corneal ulcer surface were done.

Effect of tetracycline dose and treatment-mode on selection of resistant coliform bacteria in nursery pigs

DEFF Research Database (Denmark)

Græsbøll, Kaare; Damborg, Peter; Mellerup, Anders

2017-01-01

This study describes results of a randomized clinical trial investigating the effect of oxytetracycline treatment dose and mode of administration on selection of antibiotic resistant coliform bacteria in fecal samples from nursery pigs. Nursery pigs (pigs of 4-7 weeks of age) were treated...... with oxytetracycline against Lawsonia intracellularis induced diarrhea in five pig herds. Each group was randomly allocated to one of five treatment groups: oral flock treatment with (i) high (20 mg/kg), (ii) medium (10 mg/kg) and (iii) low (5 mg/kg) dosage, (iv) oral-pen-wise (small group) treatment (10 mg...... significant changes in number or proportion of tetracycline resistant coliforms. Selection for tetracycline-resistant coliforms was significantly correlated to selection for ampicillin- and sulfonamide-resistant, but not to cefotaxime-resistant strains. In conclusion, difference in dose of oxytetracycline...

BICM-based cooperative communication systems with relay selection: Constellation and multiplexer design

KAUST Repository

Malik, Muhammad Talha

2014-09-01

We propose a new bit-interleaved coded modulation (BICM)-based cooperative communication system where different BICM modules can be optimized jointly considering the average signal to noise ratios of the direct and the two-hop Rayleigh fading channels. As such, the full benefit of BICM can be exploited in the context of cooperative communication. Our design considers cooperative communication systems with so called max-min relay selection scheme that has no loss in performance in terms of diversity- multiplexing trade off in orthogonal cooperation. The presented numerical results for rate 1/2 convolutional code with 8-ary pulse amplitude modulation equivalently 64-ary quadrature amplitude modulation show that the proposed design can offer gains up to 1.4 dB over the traditional BICM design for a target bit error rate of 10-6. Moreover the results show that the amount of gain depends on the relays\\' positions and increases with the number of relays available for selection.

Statistical flaws in design and analysis of fertility treatment studies on cryopreservation raise doubts on the conclusions

Science.gov (United States)

van Gelder, P.H.A.J.M.; Nijs, M.

2011-01-01

Decisions about pharmacotherapy are being taken by medical doctors and authorities based on comparative studies on the use of medications. In studies on fertility treatments in particular, the methodological quality is of utmost importance in the application of evidence-based medicine and systematic reviews. Nevertheless, flaws and omissions appear quite regularly in these types of studies. Current study aims to present an overview of some of the typical statistical flaws, illustrated by a number of example studies which have been published in peer reviewed journals. Based on an investigation of eleven studies at random selected on fertility treatments with cryopreservation, it appeared that the methodological quality of these studies often did not fulfil the required statistical criteria. The following statistical flaws were identified: flaws in study design, patient selection, and units of analysis or in the definition of the primary endpoints. Other errors could be found in p-value and power calculations or in critical p-value definitions. Proper interpretation of the results and/or use of these study results in a meta analysis should therefore be conducted with care. PMID:24753877

Statistical flaws in design and analysis of fertility treatment -studies on cryopreservation raise doubts on the conclusions.

Science.gov (United States)

van Gelder, P H A J M; Nijs, M

2011-01-01

Decisions about pharmacotherapy are being taken by medical doctors and authorities based on comparative studies on the use of medications. In studies on fertility treatments in particular, the methodological quality is of utmost -importance in the application of evidence-based medicine and systematic reviews. Nevertheless, flaws and omissions appear quite regularly in these types of studies. Current study aims to present an overview of some of the typical statistical flaws, illustrated by a number of example studies which have been published in peer reviewed journals. Based on an investigation of eleven studies at random selected on fertility treatments with cryopreservation, it appeared that the methodological quality of these studies often did not fulfil the -required statistical criteria. The following statistical flaws were identified: flaws in study design, patient selection, and units of analysis or in the definition of the primary endpoints. Other errors could be found in p-value and power calculations or in critical p-value definitions. Proper -interpretation of the results and/or use of these study results in a meta analysis should therefore be conducted with care.

Therapeutic potential of functional selectivity in the treatment of heart failure

DEFF Research Database (Denmark)

Christensen, Gitte Lund; Aplin, Mark; Hansen, Jakob Lerche

2010-01-01

Adrenergic and angiotensin receptors are prominent targets in pharmacological alleviation of cardiac remodeling and heart failure, but their use is associated with cardiodepressant side effects. Recent advances in our understanding of seven transmembrane receptor signaling show that it is possible...... to design ligands with "functional selectivity," acting as agonists on certain signaling pathways while antagonizing others. This represents a major pharmaceutical opportunity to separate desired from adverse effects governed by the same receptor. Accordingly, functionally selective ligands are currently...

Clustering Words to Match Conditions: An Algorithm for Stimuli Selection in Factorial Designs

Science.gov (United States)

Guasch, Marc; Haro, Juan; Boada, Roger

2017-01-01

With the increasing refinement of language processing models and the new discoveries about which variables can modulate these processes, stimuli selection for experiments with a factorial design is becoming a tough task. Selecting sets of words that differ in one variable, while matching these same words into dozens of other confounding variables…

Comparison of multimedia system and conventional method in patients’ selecting prosthetic treatment

Directory of Open Access Journals (Sweden)

Baghai R

2010-12-01

Full Text Available "nBackground and Aims: Selecting an appropriate treatment plan is one of the most critical aspects of dental treatments. The purpose of this study was to compare multimedia system and conventional method in patients' selecting prosthetic treatment and the time consumed."nMaterials and Methods: Ninety patients were randomly divided into three groups. Patients in group A, once were instructed using the conventional method of dental office and once multimedia system and time was measured in seconds from the beginning of the instruction till the patient had came to decision. The patients were asked about the satisfaction of the method used for them. In group B, patients were only instructed using the conventional method, whereas they were only exposed to soft ware in group C. The data were analyzed with Paired-T-test"n(in group A and T-test and Mann-Whitney test (in groups B and C."nResult: There was a significant difference between multimedia system and conventional method in group A and also between groups B and C (P<0.001. In group A and between groups B and C, patient's satisfaction about multimedia system was better. However, in comparison between groups B and C, multimedia system did not have a significant effect in treatment selection score (P=0.08."nConclusion: Using multimedia system is recommended due to its high ability in giving answers to a large number of patient's questions as well as in terms of marketing.

Conceptual design of the alcohol waste treatment equipment

International Nuclear Information System (INIS)

Fujisawa, Morio; Nitta, Kazuhiko; Morita, Yasuhiro; Nakada, Eiju

2001-01-01

This report describes the result of Conceptual Design of the Alcohol Waste Treatment Equipment. The experimental fast Reactor, JOYO, saves the radioactive alcohol waste at storage tank. As this alcohol waste is not able to treat with existing equipment, it is stored about 5 m 3 . And the amount of this is increasing every year. So it is necessary to treat the alcohol waste by chemical resolution for example. On account of this, the investigative test about filtration and dialyzer, and conceptual design about catalyst oxidation process, which is composed from head end process to resolution, are done. The results of investigation show as follows. 1. Investigative Test about filtration and dialyzer. (1) The electric conduction is suitable for the judgement of alkyl sodium hydrolysis Alkyl sodium hydrolysis is completed below 39% alcohol concentration. (2) The microfiltration is likely to separate the solid in alcohol waste. (3) From laboratory test, the electrodialyzer is effective for sodium separation in alcohol waste. And sodium remove rate, 96-99%, is confirmed. 2. Conceptual Design. The candidate process is as follows. (1) The head end process is electrodialyzer, and chemical resolution process is catalyst oxidation. (2) The head end process is not installed, and chemical resolution process is catalyst oxidation. (3) The head end process is electrodialyzer, and alcohol extracted by pervaporation. In this Conceptual Design, as far these process, the components, treatment ability, properties of waste, chemical mass balance, safety for fire and explosion, and the plot plan are investigated. As a result, remodeling the existing facility into catalyst oxidation process is effective to treat the alcohol waste, and treatment ability is about 1.25 l/h. (author)

Assessment and Treatment of Selective Mutism with English Language Learners

Science.gov (United States)

Mayworm, Ashley M.; Dowdy, Erin; Knights, Kezia; Rebelez, Jennica

2015-01-01

Selective mutism (SM) is a type of anxiety disorder that involves the persistent failure to speak in contexts where speech is typically expected (e.g., school), despite speaking in other contexts (e.g., home). Research on the etiology and treatment of SM is limited, as it is a rare disorder and few clinical trials evaluating SM interventions have…

A framework to support decision making in the selection of sustainable drainage system design alternatives.

Science.gov (United States)

Wang, Mingming; Sweetapple, Chris; Fu, Guangtao; Farmani, Raziyeh; Butler, David

2017-10-01

This paper presents a new framework for decision making in sustainable drainage system (SuDS) scheme design. It integrates resilience, hydraulic performance, pollution control, rainwater usage, energy analysis, greenhouse gas (GHG) emissions and costs, and has 12 indicators. The multi-criteria analysis methods of entropy weight and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) were selected to support SuDS scheme selection. The effectiveness of the framework is demonstrated with a SuDS case in China. Indicators used include flood volume, flood duration, a hydraulic performance indicator, cost and resilience. Resilience is an important design consideration, and it supports scheme selection in the case study. The proposed framework will help a decision maker to choose an appropriate design scheme for implementation without subjectivity. Copyright © 2017 Elsevier Ltd. All rights reserved.

Software Design for Interactive Graphic Radiation Treatment Simulation Systems*

Science.gov (United States)

Kalet, Ira J.; Sweeney, Christine; Jacky, Jonathan

1990-01-01

We examine issues in the design of interactive computer graphic simulation programs for radiation treatment planning (RTP), as well as expert system programs that automate parts of the RTP process, in light of ten years of experience at designing, building and using such programs. An experiment in object-oriented design using standard Pascal shows that while some advantage is gained from the design, it is still difficult to achieve modularity and to integrate expert system components. A new design based on the Common LISP Object System (CLOS) is described. This series of designs for RTP software shows that this application benefits in specific ways from object-oriented design methods and appropriate languages and tools.

A comparison of a modified sequential oral sensory approach to an applied behavior-analytic approach in the treatment of food selectivity in children with autism spectrum disorder.

Science.gov (United States)

Peterson, Kathryn M; Piazza, Cathleen C; Volkert, Valerie M

2016-09-01

Treatments of pediatric feeding disorders based on applied behavior analysis (ABA) have the most empirical support in the research literature (Volkert & Piazza, 2012); however, professionals often recommend, and caregivers often use, treatments that have limited empirical support. In the current investigation, we compared a modified sequential oral sensory approach (M-SOS; Benson, Parke, Gannon, & Muñoz, 2013) to an ABA approach for the treatment of the food selectivity of 6 children with autism. We randomly assigned 3 children to ABA and 3 children to M-SOS and compared the effects of treatment in a multiple baseline design across novel, healthy target foods. We used a multielement design to assess treatment generalization. Consumption of target foods increased for children who received ABA, but not for children who received M-SOS. We subsequently implemented ABA with the children for whom M-SOS was not effective and observed a potential treatment generalization effect during ABA when M-SOS preceded ABA. © 2016 Society for the Experimental Analysis of Behavior.

The Current State of Empirical Support for the Pharmacological Treatment of Selective Mutism

Science.gov (United States)

Carlson, John S.; Mitchell, Angela D.; Segool, Natasha

2008-01-01

This article reviews the current state of evidence for the psychopharmacological treatment of children diagnosed with selective mutism within the context of its link to social anxiety disorder. An increased focus on potential medication treatment for this disorder has resulted from significant monetary and resource limitations in typical practice,…

Treatment of Selective Mutism: Applications in the Clinic and School through Conjoint Consultation

Science.gov (United States)

Mitchell, Angela D.; Kratochwill, Thomas R.

2013-01-01

The purpose of this study was to evaluate the effectiveness of a psychosocial approach to the treatment of Selective Mutism (SM). Four children with SM along with their parents and teachers participated in the study. A comprehensive assessment was completed; manualized treatment was implemented through a conjoint behavioral consultation approach,…

The design strategy of selective PTP1B inhibitors over TCPTP.

Science.gov (United States)

Li, XiangQian; Wang, LiJun; Shi, DaYong

2016-08-15

Protein tyrosine phosphatase 1B (PTP1B) has already been well studied as a highly validated therapeutic target for diabetes and obesity. However, the lack of selectivity limited further studies and clinical applications of PTP1B inhibitors, especially over T-cell protein tyrosine phosphatase (TCPTP). In this review, we enumerate the published specific inhibitors of PTP1B, discuss the structure-activity relationships by analysis of their X-ray structures or docking results, and summarize the characteristic of selectivity related residues and groups. Furthermore, the design strategy of selective PTP1B inhibitors over TCPTP is also proposed. We hope our work could provide an effective way to gain specific PTP1B inhibitors. Copyright © 2016 Elsevier Ltd. All rights reserved.

Selection for production-related traits in Pelargonium zonale: improved design and analysis make all the difference.

Science.gov (United States)

Molenaar, Heike; Glawe, Martin; Boehm, Robert; Piepho, Hans-Peter

2017-01-01

Ornamental plant variety improvement is limited by current phenotyping approaches and neglected use of experimental designs. The present study was conducted to show the benefits of using an experimental design and corresponding analysis in ornamental breeding regarding simulated response to selection in Pelargonium zonale for production-related traits. This required establishment of phenotyping protocols for root formation and stem cutting counts, with which 974 genotypes were assessed in a two-phase experimental design. The present paper evaluates this protocol. The possibility of varietal improvement through indirect selection on secondary traits such as branch count and flower count was assessed by genetic correlations. Simulated response to selection varied greatly, depending on the genotypic variances of the breeding population and traits. A varietal improvement of over 20% is possible for stem cutting count, root formation, branch count and flower count. In contrast, indirect selection of stem cutting count by branch count or flower count was found to be ineffective. The established phenotypic protocols and two-phase experimental designs are valuable tools for breeding of P. zonale .

Revealing metabolite biomarkers for acupuncture treatment by linear programming based feature selection.

Science.gov (United States)

Wang, Yong; Wu, Qiao-Feng; Chen, Chen; Wu, Ling-Yun; Yan, Xian-Zhong; Yu, Shu-Guang; Zhang, Xiang-Sun; Liang, Fan-Rong

2012-01-01

Acupuncture has been practiced in China for thousands of years as part of the Traditional Chinese Medicine (TCM) and has gradually accepted in western countries as an alternative or complementary treatment. However, the underlying mechanism of acupuncture, especially whether there exists any difference between varies acupoints, remains largely unknown, which hinders its widespread use. In this study, we develop a novel Linear Programming based Feature Selection method (LPFS) to understand the mechanism of acupuncture effect, at molecular level, by revealing the metabolite biomarkers for acupuncture treatment. Specifically, we generate and investigate the high-throughput metabolic profiles of acupuncture treatment at several acupoints in human. To select the subsets of metabolites that best characterize the acupuncture effect for each meridian point, an optimization model is proposed to identify biomarkers from high-dimensional metabolic data from case and control samples. Importantly, we use nearest centroid as the prototype to simultaneously minimize the number of selected features and the leave-one-out cross validation error of classifier. We compared the performance of LPFS to several state-of-the-art methods, such as SVM recursive feature elimination (SVM-RFE) and sparse multinomial logistic regression approach (SMLR). We find that our LPFS method tends to reveal a small set of metabolites with small standard deviation and large shifts, which exactly serves our requirement for good biomarker. Biologically, several metabolite biomarkers for acupuncture treatment are revealed and serve as the candidates for further mechanism investigation. Also biomakers derived from five meridian points, Zusanli (ST36), Liangmen (ST21), Juliao (ST3), Yanglingquan (GB34), and Weizhong (BL40), are compared for their similarity and difference, which provide evidence for the specificity of acupoints. Our result demonstrates that metabolic profiling might be a promising method to

Design of an operations manager selection system in service encounter

Directory of Open Access Journals (Sweden)

Tanawin Nunthaphanich

2015-10-01

Full Text Available The purpose of this study is to provide criteria for selecting operations managers at the ‘service encounter’ for mobile telecommunication companies, and develop a system for this multi-criteria decision-making scheme based on the Analytical Hierarchy Process (AHP. There are three main criteria for evaluating the capability of service-encounter operation managers: (1 the ability to design service process; (2 the ability to operate service process; (3 the ability to conduct improvement. The AHP operation manager selection tool was developed based on the complex problems at the service encounter. It was created as a decision support system which was used to recruit and evaluate operations managers’ capability for the purpose of career advancement.

Investigation of selective induction of breast cancer cells to death with treatment of plasma-activated medium

Science.gov (United States)

Hashizume, Hiroshi; Tanaka, Hiromasa; Nakamura, Kae; Kano, Hiroyuki; Ishikawa, Kenji; Kikkawa, Fumitaka; Mizuno, Masaaki; Hori, Masaru

2015-09-01

The applications of plasma in medicine have much attention. We previously showed that plasma-activated medium (PAM) induced glioblastoma cells to apoptosis. However, it has not been elucidated the selectivity of PAM in detail. In this study, we investigated the selective effect of PAM on the death of human breast normal and cancer cells, MCF10A and MCF7, respectively, and observed the selective death with fluorescent microscopy. For the investigation of cell viability with PAM treatment, we prepared various PAMs according to the strengths, and treated each of cells with PAMs. Week PAM treatment only decreased the viability of MCF7 cells, while strong PAM treatment significantly affected both viabilities of MCF7 and MCF10A cells. For the fluorescent observation, we prepared the mixture of MCF7 and fluorescent-probed MCF10A cells, and seeded them. After the treatment of PAMs, the images showed that only MCF7 cells damaged in the mixture with week PAM treatment. These results suggested that a specific range existed with the selective effect in the strength of PAM. This work was partly supported by a Grant-in-Aid for Scientific Research on Innovative Areas ``Plasma Medical Innovation'' Grant No. 24108002 and 24108008 from the Ministry of Education, Culture, Sports, Science and Technology of Japan.

Alemtuzumab in the treatment of multiple sclerosis: patient selection and special considerations

Directory of Open Access Journals (Sweden)

Dörr J

2016-10-01

the other are not yet available. Thus, the overall success of alemtuzumab treatment critically depends on the patient selection. The aim of this article is therefore, to characterize the significance of alemtuzumab in the treatment of MS with a focus on the selection of the optimal patient. Keywords: multiple sclerosis, treatment, safety, efficacy, selection, benefit risk relation

Factorial design of a solar photocatalytic process to treatment of wastewater effluent

Energy Technology Data Exchange (ETDEWEB)

Francisco, Adriana Ribeiro; Paterniani, Jose Euclides Stipp [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola], E-mail: adriana.francisco@agr.unicamp.br; Kuwakino, Adriana Yuri [Universidade Estadual de Campinas (CESET/UNICAMP), Limeira, SP (Brazil). Centro Superior de Educacao Tecnologica

2008-07-01

Advanced treatments are attributed to improving the quality of various types of waste such as the sanitary wastewater. The heterogeneous photocatalysis is an alternative that allows to improve the effluents conditions. This is possible because many chemical compounds of environmental concern can be degraded using UV radiation on a semiconductor. However, to enable the efficiency of the process photocatalytic is necessary to conduct a study of optimization to establish favorable conditions between selected variables. The aim of this work was a reactor solar photocatalytic optimization using factorial design 2{sup k}, depending on variables: mass (TiO{sub 2}), time (min) and flow of air (L min{sup -1}), using as analytical response the removal of color. The experiment was conducted at the Faculty of Agricultural Engineering (FEAGRI) and it was used the sanitary wastewater of there. The results indicated that there were significant efficiency using combinations mass = 1000 mg L{sup -1}, time = 360 min and flow of air = 5 L min{sup -1}. In the calculations of factorial design, the time showed a marked positive effect of 7.76, while the flow of air, when in excess, had an inhibitor behavior, even getting positive effect. (author)

New treatment centers for radioactive waste from Russian designed VVER-reactors

International Nuclear Information System (INIS)

Chrubasik, A.

1997-01-01

The nuclear power plants using Russian designed VVER-type reactors, were engineered and designed without any wastes treatment facilities. The liquid and solid waste were collected in storage tanks and shelters. After many years of operation, the storage capabilities are exhausted. The treatment of the stored and still generated waste represents a problem of reactor safety and requires a short term solution. NUKEM has been commissioned to design and construct several new treatment centers to remove and process the stored waste. This paper describes the process and lessons learned on the development of this system. The new radioactive waste treatment center (RWTC) includes comprehensive systems to treat both liquid and solid wastes. The process includes: 1) treatment of evaporator concentrates, 2) treatment of ion exchange resins, 3) treatment of solid burnable waste, 4) treatment of liquid burnable waste, 5) treatment of solid decontaminable waste, 6) treatment of solid compactible waste. To treat these waste streams, various separate systems and facilities are needed. Six major facilities are constructed including: 1. A sorting facility with systems for waste segregation. 2. A high-force compactor facility for volume reduction of non-burnable waste. 3. An incinerator facility for destruction of: 1) solid burnable waste, 2) liquid burnable waste, 3) low level radioactive ion exchange resins. 4. A facility for melting of incineration residue. 5. A cementation facility for stabilization of: 1) medium level radioactive ion exchange resins, 2) solid non compactible waste, 3) compacted solid waste. 6. Separation of radionuclides from evaporator concentrates. This presentation will address the facilities, systems, and lessons learned in the development of the new treatment centers. (author)

Health-Care Waste Treatment Technology Selection Using the Interval 2-Tuple Induced TOPSIS Method

Directory of Open Access Journals (Sweden)

Chao Lu

2016-06-01

Full Text Available Health-care waste (HCW management is a major challenge for municipalities, particularly in the cities of developing nations. Selecting the best treatment technology for HCW can be regarded as a complex multi-criteria decision making (MCDM issue involving a number of alternatives and multiple evaluation criteria. In addition, decision makers tend to express their personal assessments via multi-granularity linguistic term sets because of different backgrounds and knowledge, some of which may be imprecise, uncertain and incomplete. Therefore, the main objective of this study is to propose a new hybrid decision making approach combining interval 2-tuple induced distance operators with the technique for order preference by similarity to an ideal solution (TOPSIS for tackling HCW treatment technology selection problems with linguistic information. The proposed interval 2-tuple induced TOPSIS (ITI-TOPSIS can not only model the uncertainty and diversity of the assessment information given by decision makers, but also reflect the complex attitudinal characters of decision makers and provide much more complete information for the selection of the optimum disposal alternative. Finally, an empirical example in Shanghai, China is provided to illustrate the proposed decision making method, and results show that the ITI-TOPSIS proposed in this paper can solve the problem of HCW treatment technology selection effectively.

RIP Input Tables From Wapdeg For LA Design Selection: Enhanced Design Alternative IIIb

International Nuclear Information System (INIS)

K.G. Mon; K.G. Mast; J.H. Lee

1999-01-01

The purpose of this calculation is to document the Waste Package Degradation (WAPDEG) version 3.09 (CRWMS M and O 1998b. 'Software Routine Report for WAPDEG' (Version 3.09)) simulations used to analyze degradation and failure of 2-cm thick titanium grade 7 corrosion resistant material (CRM) drip shields as well as degradation and failure of the waste packages over which they are placed. The waste packages are composed of two corrosion resistant materials (CRM) barriers. The outer barrier is composed of 2 cm of Alloy 22 and the inner barrier is composed of 1.5 cm of titanium grade 7. The WAPDEG simulation results are post-processed into tables of drip shield/waste package degradation time histories suitable for use as input into the Integrated Probabilistic Simulator for Environmental Systems (RIP) version 5.19.01 (Golder Associates 1998) computer code. This calculation supports Performance Assessment analysis of the License Application Design Selection (LADS) Enhanced Design Alternative IIIb

Integrated basic treatment of activated carbon for enhanced CO{sub 2} selectivity

Energy Technology Data Exchange (ETDEWEB)

Adelodun, Adedeji Adebukola; Jo, Young-Min, E-mail: ymjo@khu.ac.kr

2013-12-01

We attempted the use of three chemical agents viz nitric acid (HN), calcium nitrate (CaN) and calcium ethanoate (CaEt) to achieve enhanced CO{sub 2} selective adsorption by activated carbon (AC). In dry phase treatment, microporous coconut shell-based carbon (CS) exhibits higher CO{sub 2} capacity than coal-based. However, upon wet-phase pre-treatment, modified CS samples showed lesser CO{sub 2} adsorption efficiency. Surface characterization with X-ray photoelectron spectroscopy confirms the presence of calcium and amine species on the samples with integrated treatment (A-CaN). These samples recorded the highest low-level CO{sub 2} capture despite calcinated CaEt-doped samples (C-CaEt) showing the highest value for pure and high level CO{sub 2} adsorption capacities. The slope and linearity values of isobaric desorption were used to estimate the proportion of CO{sub 2} chemisorbed and heterogeneity of the adsorbents’ surfaces respectively. Consequently, integrated basic impregnation provides the most efficient adsorbents for selective adsorption of both indoor and outdoor CO{sub 2} levels.

Surrogate formulations for thermal treatment of low-level mixed waste, Part II: Selected mixed waste treatment project waste streams

Energy Technology Data Exchange (ETDEWEB)

Bostick, W.D.; Hoffmann, D.P.; Chiang, J.M.; Hermes, W.H.; Gibson, L.V. Jr.; Richmond, A.A. [Martin Marietta Energy Systems, Inc., Oak Ridge, TN (United States); Mayberry, J. [Science Applications International Corp., Idaho Falls, ID (United States); Frazier, G. [Univ. of Tennessee, Knoxville, TN (United States)

1994-01-01

This report summarizes the formulation of surrogate waste packages, representing the major bulk constituent compositions for 12 waste stream classifications selected by the US DOE Mixed Waste Treatment Program. These waste groupings include: neutral aqueous wastes; aqueous halogenated organic liquids; ash; high organic content sludges; adsorbed aqueous and organic liquids; cement sludges, ashes, and solids; chloride; sulfate, and nitrate salts; organic matrix solids; heterogeneous debris; bulk combustibles; lab packs; and lead shapes. Insofar as possible, formulation of surrogate waste packages are referenced to authentic wastes in inventory within the DOE; however, the surrogate waste packages are intended to represent generic treatability group compositions. The intent is to specify a nonradiological synthetic mixture, with a minimal number of readily available components, that can be used to represent the significant challenges anticipated for treatment of the specified waste class. Performance testing and evaluation with use of a consistent series of surrogate wastes will provide a means for the initial assessment (and intercomparability) of candidate treatment technology applicability and performance. Originally the surrogate wastes were intended for use with emerging thermal treatment systems, but use may be extended to select nonthermal systems as well.

Surrogate formulations for thermal treatment of low-level mixed waste, Part II: Selected mixed waste treatment project waste streams

International Nuclear Information System (INIS)

Bostick, W.D.; Hoffmann, D.P.; Chiang, J.M.; Hermes, W.H.; Gibson, L.V. Jr.; Richmond, A.A.; Mayberry, J.; Frazier, G.

1994-01-01

This report summarizes the formulation of surrogate waste packages, representing the major bulk constituent compositions for 12 waste stream classifications selected by the US DOE Mixed Waste Treatment Program. These waste groupings include: neutral aqueous wastes; aqueous halogenated organic liquids; ash; high organic content sludges; adsorbed aqueous and organic liquids; cement sludges, ashes, and solids; chloride; sulfate, and nitrate salts; organic matrix solids; heterogeneous debris; bulk combustibles; lab packs; and lead shapes. Insofar as possible, formulation of surrogate waste packages are referenced to authentic wastes in inventory within the DOE; however, the surrogate waste packages are intended to represent generic treatability group compositions. The intent is to specify a nonradiological synthetic mixture, with a minimal number of readily available components, that can be used to represent the significant challenges anticipated for treatment of the specified waste class. Performance testing and evaluation with use of a consistent series of surrogate wastes will provide a means for the initial assessment (and intercomparability) of candidate treatment technology applicability and performance. Originally the surrogate wastes were intended for use with emerging thermal treatment systems, but use may be extended to select nonthermal systems as well

Industrial process water treatment and reuse: A framework for synthesis and design

DEFF Research Database (Denmark)

Quaglia, Alberto; Pennati, Alessandra; Bogataj, Milos

2014-01-01

Mathematical optimization has shown the potential to contribute to industrial water management, through the development of the solution methods needed for optimization-based design of wastewater treatment and reuse networks (also called water networks). Nevertheless, the application of this appro......, allowing a reduced water footprint, and the treatment costs are identified.......Mathematical optimization has shown the potential to contribute to industrial water management, through the development of the solution methods needed for optimization-based design of wastewater treatment and reuse networks (also called water networks). Nevertheless, the application...... algorithms. To this end, we propose a computer-aided framework for the design of water treatment and reuse networks. In the framework, optimization methods, problem analysis tools and wastewater engineering knowledge are integrated in a computer-aided environment, in order to facilitate the formulation...

Selection criteria utilized for hyperbaric oxygen treatment of carbon monoxide poisoning.

Science.gov (United States)

Hampson, N B; Dunford, R G; Kramer, C C; Norkool, D M

1995-01-01

Medical directors of North American hyperbaric oxygen (HBO) facilities were surveyed to assess selection criteria applied for treatment of acute carbon monoxide (CO) poisoning within the hyperbaric medicine community. Responses were received from 85% of the 208 facilities in the United States and Canada. Among responders, 89 monoplace and 58 multiplace chamber facilities treat acute CO poisoning, managing a total of 2,636 patients in 1992. A significant majority of facilities treat CO-exposed patients with coma (98%), transient loss of consciousness (LOC) (77%), ischemic changes on electrocardiogram (91%), focal neurologic deficits (94%), or abnormal psychometric testing (91%), regardless of carboxyhemoglobin (COHb) level. Although 92% would use HBO for a patient presenting with headache, nausea, and COHb 40%, only 62% of facilities utilize a specified minimum COHb level as the sole criterion for HBO therapy of an asymptomatic patient. When COHb is used as an independent criterion to determine HBO treatment, the level utilized varies widely between institutions. Half of responding facilities place limits on the delay to treatment for patients with only transient LOC. Time limits are applied less often in cases with persistent neurologic deficits. While variability exists, majority opinions can be derived for many patient selection criteria regarding the use of HBO in acute CO poisoning.

Methodology for Plantwide Design and Optimization of Wastewater Treatment Plants

DEFF Research Database (Denmark)

Maria Dragan, Johanna; Zubov, Alexandr; Sin, Gürkan

2017-01-01

Design of Wastewater Treatment Plants (WWTPs) is a complex engineering task which requires integration of knowledge and experience from environmental biotechnology, process engineering, process synthesis and design as well as mathematical programming. A methodology has been formulated and applied...... for the systematic analysis and development of plantwide design of WWTPs using mathematical optimization and statistical methods such as sensitivity and uncertainty analyses....

A Modular Flow Design for the meta-Selective C-H Arylation of Anilines.

Science.gov (United States)

Gemoets, Hannes P L; Laudadio, Gabriele; Verstraete, Kirsten; Hessel, Volker; Noël, Timothy

2017-06-12

Described herein is an effective and practical modular flow design for the meta-selective C-H arylation of anilines. The design consists of four continuous-flow modules (i.e., diaryliodonium salt synthesis, meta-selective C-H arylation, inline copper extraction, and aniline deprotection) which can be operated either individually or consecutively to provide direct access to meta-arylated anilines. With a total residence time of 1 hour, the desired product could be obtained in high yield and excellent purity without the need for column chromatography, and the residual copper content meets the standards for parenterally administered pharmaceutical substances. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Neuroimaging in aphasia treatment research: Standards for establishing the effects of treatment

Science.gov (United States)

Kiran, Swathi; Ansaldo, Ana; Bastiaanse, Roelien; Cherney, Leora R.; Howard, David; Faroqi-Shah, Yasmeen; Meinzer, Marcus; Thompson, Cynthia K

2012-01-01

The goal of this paper is to discuss experimental design options available for establishing the effects of treatment in studies that aim to examine the neural mechanisms associated with treatment-induced language recovery in aphasia, using functional magnetic resonance imaging (fMRI). We present both group and single-subject experimental or case-series design options for doing this and address advantages and disadvantages of each. We also discuss general components of and requirements for treatment research studies, including operational definitions of variables, criteria for defining behavioral change and treatment efficacy, and reliability of measurement. Important considerations that are unique to neuroimaging-based treatment research are addressed, pertaining to the relation between the selected treatment approach and anticipated changes in language processes/functions and how such changes are hypothesized to map onto the brain. PMID:23063559

Designing robust control-based HIV-treatment

Directory of Open Access Journals (Sweden)

Fredy Andrés Olarte Dussán

2008-05-01

Full Text Available Designing a robust control-based treatment for human immunodeficiency virus (HIV-infected patients was studied. The dynamics of the immune system’s response to infection was modelled using a 5th order nonlinear model with separate efficacy coefficients for protease inhibitor (PIs and reverse transcriptase inhibitors (RTIs. The immune res-ponse has been represented as an uncertain system due to errors in parameter estimation and the existence of un-modelled dynamics. A polytopic system was constructed incorporating all possible system parameter values. A con-trol system was designed using robust pole location techniques stabilising the polytopic system around an equilibrium point having a low viral load. Numerical simulation results (including the organism’s pharmacokinetical response to anti-retroviral drugs showed that the control law could lead to long-term stable conditions, even in extreme cases.

Justifying the design and selection of literacy and thinking tools

Directory of Open Access Journals (Sweden)

David Whitehead

2008-10-01

Full Text Available Criteria for the design and selection of literacy and thinking tools that allow educators to justifywhat they do are described within a wider framework of learning theory and research into bestpractice. Based on a meta-analysis of best practice, results from a three year project designedto evaluate the effectiveness of a secondary school literacy initiative in New Zealand, togetherwith recent research from cognitive and neuro-psychologists, it is argued that the design andselection of literacy and thinking tools used in elementary schools should be consistent with (iteaching focused (ii learner focused, (iii thought linked (iv neurologically consistent, (vsubject specific, (vi text linked, (vii developmentally appropriate, and (viii assessment linkedcriteria.

License Application Design Selection Report, REV 01. August 1999

International Nuclear Information System (INIS)

Hastings, C.R.

1999-01-01

In December 1998, the U.S. Department of Energy (DOE) published the ''Viability Assessment of a Repository at Yucca Mountain'' (DOE 1998b). The Viability Assessment described a preliminary design of a potential repository at Yucca Mountain, Nevada, for disposal of spent nuclear fuel and high-level radioactive waste, and assessed the probable behavior of that repository design in the Yucca Mountain geologic setting. The report concluded that 'Yucca Mountain remains a promising site for a geologic repository and that work should proceed to support a decision in 2001 on whether to recommend the site to the President for development as a repository'. It also concluded that 'uncertainties remain about key natural processes, the preliminary design, and how the site and design would interact'. Recognizing that the design that was evaluated will be refined before a license application could be submitted, the Viability Aassesment notes that 'DOE is evaluating several design options and alternatives that could reduce existing uncertainty and improve the performance of the repository system'. During the preparation of the Viability Assessment, DOE asked the contractor for the Civilian Radioactive Waste Management Program to study alternative design concepts for a potential geologic repository for high-level radioactive waste at Yucca Mountain. The License Application Design Selection (LADS) project was initiated to conduct that study. The goal of the project was to develop and evaluate a diverse range of conceptual repository designs that work well in concert with the Yucca Mountain site and to recommend an initial design concept for the possible Site Recommendation and License Apllication. This report presents the results of the LADS project. The design process consisted of two phases. In Phase I, a series of basic design concepts (design alternatives) and components (design features) were analyzed for their potential value as elements of a repository design. In Phase II

Classification system on the selection of number of implants and superstructure design on the basis available vertical restorative space and interforaminal distance for implant supported mandibular overdenture

Directory of Open Access Journals (Sweden)

Akshay Bhargava

2016-01-01

Full Text Available Purpose: The rehabilitation of the edentulous mandible is a challenge due to various limiting factors, of which the available vertical restorative space (AVRS has been well understood in the literature. However, other anatomic variations such as arch form, arch size, and also the interforaminal distance (IFD (due to the presence of mandibular nerve are influential in the selection of size and position of implants, and thereby the prosthetic design. Materials and Method: In the present study, 30 edentulous patients from a group of 300 edentulous patients, representing all the three jaw relations (Class I, II, and III were evaluated for designing a classification that could help in a comprehensive treatment plan for the edentulous mandible. Dental panoramic radiographs of each individual with a trial or final prosthesis were made. The horizontal IFD and AVRS values were calculated. Results: One-way analysis of variance followed by post-hoc test (multiple comparison and Bonferroni method having P < 0.05 as significant value showed an overall mean of 38.9 mm for horizontal distance and 13.69 mm for the AVRS in 30 edentulous patients. Conclusion: The results showed that in the majority of cases (90% there is insufficient space to place a bar attachment supported by five implants for mandibular overdentures. This suggests that a universal treatment plan cannot be followed due to varying anatomic factors. Hence, it becomes imperative to have a set of clinical guidelines based on the AVRS and IFD, for the selection of implant number and type of attachment. The article proposes a simple classification system based on the AVRS and IFD for establishing guidelines in the treatment planning of the edentulous mandible, to aid in selection of implant size, number, and position along with the associated prosthetic design.

Host population structure and treatment frequency maintain balancing selection on drug resistance

Science.gov (United States)

Baskerville, Edward B.; Colijn, Caroline; Hanage, William; Fraser, Christophe; Lipsitch, Marc

2017-01-01

It is a truism that antimicrobial drugs select for resistance, but explaining pathogen- and population-specific variation in patterns of resistance remains an open problem. Like other common commensals, Streptococcus pneumoniae has demonstrated persistent coexistence of drug-sensitive and drug-resistant strains. Theoretically, this outcome is unlikely. We modelled the dynamics of competing strains of S. pneumoniae to investigate the impact of transmission dynamics and treatment-induced selective pressures on the probability of stable coexistence. We find that the outcome of competition is extremely sensitive to structure in the host population, although coexistence can arise from age-assortative transmission models with age-varying rates of antibiotic use. Moreover, we find that the selective pressure from antibiotics arises not so much from the rate of antibiotic use per se but from the frequency of treatment: frequent antibiotic therapy disproportionately impacts the fitness of sensitive strains. This same phenomenon explains why serotypes with longer durations of carriage tend to be more resistant. These dynamics may apply to other potentially pathogenic, microbial commensals and highlight how population structure, which is often omitted from models, can have a large impact. PMID:28835542

Threat Related Selective Attention Predicts Treatment Success in Childhood Anxiety Disorders

Science.gov (United States)

Legerstee, Jeroen S.; Tulen, Joke H. M.; Kallen, Victor L.; Dieleman, Gwen C.; Treffers, Philip D. A.; Verhulst, Frank C.; Utens, Elisabeth M. W. J.

2009-01-01

Threat-related selective attention was found to predict the success of the treatment of childhood anxiety disorders through administering a pictorial dot-probe task to 131 children with anxiety disorders prior to cognitive behavioral therapy. The diagnostic status of the subjects was evaluated with a semistructured clinical interview at both pre-…

Methodology on sizing and selecting thermoelectric cooler from different TEC manufacturers in cooling system design

International Nuclear Information System (INIS)

Tan, F.L.; Fok, S.C.

2008-01-01

The search and selection for a suitable thermoelectric cooler (TEC) to optimize a cooling system design can be a tedious task as there are many product ranges from several TEC manufacturers. Although the manufacturers do provide proprietary manuals or electronic search facilities for their products, the process is still cumbersome as these facilities are incompatible. The electronic facilities often have different user interfaces and functionalities, while the manual facilities have different presentations of the performance characteristics. This paper presents a methodology to assist the designer to size and select the TECs from different manufacturers. The approach will allow designers to find quickly and to evaluate the devices from different TEC manufacturers. Based on the approach, the article introduces a new operational framework for an Internet based thermoelectric cooling system design process that would promote the interaction and collaboration between the designers and TEC manufacturers. It is hoped that this work would be useful for the advancement of future tools to assist designers to develop, analyze and optimize thermoelectric cooling system design in minimal time using the latest TECs available on the market

Clinimetrics corner: choosing appropriate study designs for particular questions about treatment subgroups

DEFF Research Database (Denmark)

Kent, Peter; Hancock, Mark; Petersen, Ditte H.D

2010-01-01

that are inappropriate given the randomized controlled trial design used. The research design to choose, when developing a study protocol that investigates the effect of treatment subgroups, depends on the particular research question. Similarly, the inferences that can be drawn from an existing study will vary...... receive the same treatment?'; and (4) 'Are outcomes for a number of treatments better if those treatments are matched to patients in specific subgroups, than if the SAME treatments are randomly given to patients?'. Illustrative examples of these studies are provided. Conclusion: If the clinical usefulness......Background: Many clinicians and researchers believe that there are subgroups of people with spinal pain who respond differently to treatment and have different prognoses. There has been considerable interest in this topic recently. However, problems occur when conclusions about subgroups are made...

An integrated knowledge-based and optimization tool for the sustainable selection of wastewater treatment process concepts

DEFF Research Database (Denmark)

Castillo, A.; Cheali, Peam; Gómez, V.

2016-01-01

The increasing demand on wastewater treatment plants (WWTPs) has involved an interest in improving the alternative treatment selection process. In this study, an integrated framework including an intelligent knowledge-based system and superstructure-based optimization has been developed and applied...... to a real case study. Hence, a multi-criteria analysis together with mathematical models is applied to generate a ranked short-list of feasible treatments for three different scenarios. Finally, the uncertainty analysis performed allows for increasing the quality and robustness of the decisions considering...... benefit and synergy is achieved when both tools are integrated because expert knowledge and expertise are considered together with mathematical models to select the most appropriate treatment alternative...

Selection of rational technical solutions in designing a robotized assembly complex

International Nuclear Information System (INIS)

Petrov, B.M.; Rasulbekov, R.I.

1984-01-01

One of the methods permitting a more objective approach to decision making in design is the method of ordered search which, in combination with the methods of expert estimate was used in designing the robotized assembly-finishing complex for automobile tires. The assembly-finishing complex consists of a number of functionally independent parts, i.e., modules provided with manipulators and mutually connected by a transport system with intermediate storage. The modified method of ordered search, examined in the present work, was therefore used for each module separately, and not for the complex as a whole. We will examine the main principles of our approach to the selection of design solutions for the example of a module for laying on the bottom-cushion cords

Generation of radio vortex beams with designable polarization using anisotropic frequency selective surface

Science.gov (United States)

Yang, Jin; Zhang, Cheng; Ma, Hui Feng; Zhao, Jie; Dai, Jun Yan; Yuan, Wei; Yang, Liu Xi; Cheng, Qiang; Cui, Tie Jun

2018-05-01

We propose a strategy to convert a linearly polarized wave from a single point source to an orbital angular momentum (OAM) wave by arbitrary polarization via an anisotropic frequency selective surface (FSS) in the microwave frequency. By tailoring the geometries of FSS elements, reflection-phases in x and y polarizations are engineered and encoded independently, which allows us to design the eventual polarization state of the generated OAM vortex beam by elaborately selecting individual coding sequences for each polarization. Two types of FSSs are designed and experimentally characterized to demonstrate the capability of OAM generation with circular and linear polarizations, respectively, showing excellent performance in a wide bandwidth from 14 to 16 GHz. This method provides opportunities for polarization multiplexing in microwave OAM communication systems.

Selected topics in special nuclear materials safeguard system design

International Nuclear Information System (INIS)

King, L.L.; Thatcher, C.D.; Clarke, J.D.; Rodriguez, M.P.

1991-01-01

During the past two decades the improvements in circuit integration have given rise to many new applications in digital processing technology by continuously reducing the unit cost of processing power. Along with this increase in processing power a corresponding decrease in circuit volume has been achieved. Progress has been so swift that new classes of applications become feasible every 2 or 3 years. This is especially true in the application of proven new technology to special nuclear materials (SNM) safeguard systems. Several areas of application were investigated in establishing the performance requirements for the SNM safeguard system. These included the improvements in material control and accountability and surveillance by using multiple sensors to continuously monitor SNM inventory within the selected value(s); establishing a system architecture to provide capabilities needed for present and future performance requirements; and limiting operating manpower exposure to radiation. This paper describes two selected topics in the application of state-of-the-art, well-proven technology to SNM safeguard system design

How we created a peer-designed specialty-specific selective for medical student career exploration.

Science.gov (United States)

Keating, Elizabeth M; O'Donnell, Erin P; Starr, Stephanie R

2013-01-01

In recent years, medical students have recognized and advocated for opportunities to explore various specialties earlier in their medical education. A brief literature review, however, reveals little consensus on the best approach to introduce students to different fields during their preclinical years. We present one of the first reports of a student-led effort to design and implement a preclinical specialty-specific elective. At Mayo Medical School, for two consecutive years the student president of the Pediatric Interest Group has created a peer-designed weeklong group elective ("selective") experience consisting of workshops, faculty and resident panel discussions, and clinical shadowing experiences based on a student needs assessment. Each year, more than 25% of the first- and second-year medical student body participated. The majority of students who completed the selective agreed that this experience heightened their interests and expanded their knowledge about pediatrics. The pediatric group selective has provided students with important resources for their medical education and future careers. Students found the group selective beneficial to their learning experience and recommend continuing to offer it in the future.

Seat Capacity Selection for an Advanced Short-Haul Aircraft Design

Science.gov (United States)

Marien, Ty V.

2016-01-01

A study was performed to determine the target seat capacity for a proposed advanced short-haul aircraft concept projected to enter the fleet by 2030. This analysis projected the potential demand in the U.S. for a short-haul aircraft using a transportation theory approach, rather than selecting a target seat capacity based on recent industry trends or current market demand. A transportation systems model was used to create a point-to-point network of short-haul trips and then predict the number of annual origin-destination trips on this network. Aircraft of varying seat capacities were used to meet the demand on this network, assuming a single aircraft type for the entire short-haul fleet. For each aircraft size, the ticket revenue and operational costs were used to calculate a total market profitability metric for all feasible flights. The different aircraft sizes were compared, based on this market profitability metric and also the total number of annual round trips and markets served. Sensitivity studies were also performed to determine the effect of changing the aircraft cruise speed and maximum trip length. Using this analysis, the advanced short-haul aircraft design team was able to select a target seat capacity for their design.

Improving clinical trial design for hepatocellular carcinoma treatments

Directory of Open Access Journals (Sweden)

Robert G. Gish

2011-12-01

Full Text Available Despite its place as the third leading cause of cancer deaths worldwide, there are currently no approved chemotherapeutic agents, devices or techniques to treat hepatocellular carcinoma. Importantly, there have been no phase III studies demonstrating survival benefit, nor any randomized studies of treatment except for transarterial chemoembolization and most recently sorafenib. The importance of well-designed clinical trials of agents to treat HCC has never been greater. However, general clinical study design issues, combined with HCC-specific issues pose significant challenges in structuring such studies. HCC-related challenges include the heterogeneity of this cancer and the fact that it is frequently accompanied by significant comorbidities at diagnosis, such as active hepatitis B or C virus replication, substantial past or on-going alcohol use, and cirrhosis, itself often a fatal disease. The recently published comparison of a newer treatment, nolatrexed to doxorubicin, and comments about this study’s initial HCC diagnostic criteria, staging system, comparator therapy and choice of endpoints have provided a platform to discuss the challenges unique to the design of HCC clinical trials. The difficulty in accurately framing study results obtained from the constantly changing HCC clinical landscape and approaches to meet these challenges will be reviewed.

RIP Input Tables from WAPDEG for LA Design Selection: Enhanced Design Alternative II-3

International Nuclear Information System (INIS)

A.M. Monib

1999-01-01

The purpose of this calculation is to document (1) the Waste Package Degradation (WAPDEG) version 3.09 (CRWMS M and O 1998b. ''Software Routine Report for WAPDEG'' (Version 3.09)) simulations used to analyze degradation and failure of 2-cm thick titanium grade 7 corrosion resistant material (CRM) drip shields (that are placed over waste packages composed of a 2-cm thick Alloy 22 corrosion resistant material (CRM) as the outer barrier and an unspecified material to provide structural support as the inner barrier) as well as degradation and failure of the waste packages themselves, and (2) post-processing of these results into tables of drip shield/waste package degradation time histories suitable for use as input into the Integrated Probabilistic Simulator for Environmental Systems (RIP) version 5.19.01 (Golder Associates 1998) computer code. This calculation supports Performance Assessment analysis of the License Application Design Selection (LADS) Enhanced Design Alternative (EDA) II-3. The aging period in the EDA II design (CRWMS M and O 1999f. ''Design Input Request for LADS Phase II EDA Evaluations'', Item 1 Row 9 Column 3) was replaced in the case of EDA II-3 with 25 years preclosure ventilation, leading to a total of 50 years preclosure ventilation. The waste packages are line loaded in the repository and no backfill is used

[Professor WANG Fuchun's experience in the acupoint selection of clinical treatment with acupuncture and moxibustion].

Science.gov (United States)

Jiang, Hailin; Liu, Chengyu; Ha, Lijuan; Li, Tie

2017-11-12

Professor WANG Fuchun 's experience in the acupoint selection of clinical treatment with acupuncture and moxibustion was summarized. The main acupoints are selected by focusing on the chief symptoms of disease, the supplementary points are selected by differentiating the disorders. The acupoints are modified in terms of the changes of sickness. The effective acupoints are selected flexibly in accordance with the specific effects of points. The summary on the acupoint selection reflects professor WANG Fuchun 's academic thoughts and clinical experience and effectively instructs the clinical practice of acupuncture and moxibustion.

Site selection handbook: Workshop on site selection for low-level radioactive waste disposal facilities

International Nuclear Information System (INIS)

1987-10-01

The Low-Level Radioactive Waste Policy Amendments Act of 1985 (LLRWPAA) requires the Department of Energy (DOE) to provide technical assistance to ''...those compact regions, host States and nonmember States determined by the Secretary to require assistance.'' Technical assistance has been defined to include, but not be limited to, ''technical guidelines for site selection.'' This site selection workshop was developed to assist States and Compacts in developing new low-level radioactive waste (LLW) disposal sites in accordance with the requirements of the LLRWPAA. The workshop comprises a series of lectures, discussion topics, and exercises, supported by this Site Selection Workshop Handbook, designed to examine various aspects of a comprehensive site selection program. It is not an exhaustive treatment of all aspects of site selection, nor is it prescriptive. The workshop focuses on the major elements of site selection and the tools that can be used to implement the site selection program

Design of the Monitored Occlusion Treatment of Amblyopia Study (MOTAS)

OpenAIRE

Stewart, C E; Fielder, A R; Stephens, D A; Moseley, M J

2002-01-01

Background/aims: The effectiveness of occlusion therapy for the treatment of amblyopia is a research priority. The authors describe the design of the Monitored Occlusion Treatment for Amblyopia Study (MOTAS) and its methodology. MOTAS will determine the dose-response relation for occlusion therapy as a function of age and category of amblyopia.

Selection of efficient etchants for nondestructive treatment of semiconductors

International Nuclear Information System (INIS)

Tomashik, V.N.; Fomin, A.V.; Tomashik, Z.F.

1996-01-01

The scheme for studying etching processes of semiconductor materials and developing new etchants for different semiconductors is proposed. The scheme includes the experiment mathematical planning, computerized physicochemical modeling, kinetic studies, investigation of surface layers, formed by etching. Such on approach makes it possible to optimize the etchant composition in every concrete cage. The scheme is tested in the course of developing optimal methodologies of preepitaxial treatment and selection of etchants composition for semiconductor compounds of the A 1 B 6 and A 3 B 5 type. 13 refs., 4 figs

Treatment efficacy, treatment failures and selection of macrolide resistance in patients with high load of Mycoplasma genitalium during treatment of male urethritis with josamycin.

Science.gov (United States)

Guschin, Alexander; Ryzhikh, Pavel; Rumyantseva, Tatiana; Gomberg, Mikhail; Unemo, Magnus

2015-02-03

Azithromycin has been widely used for Mycoplasma genitalium treatment internationally. However, the eradication efficacy has substantially declined recent decade. In Russia, josamycin (another macrolide) is the recommended first-line treatment for M. genitalium infections, however, no data regarding treatment efficacy with josamycin and resistance in M. genitalium infections have been internationally published. We examined the M. genitalium prevalence in males attending an STI clinic in Moscow, Russia from December 2006 to January 2008, investigated treatment efficacy with josamycin in male urethritis, and monitored the M. genitalium DNA eradication dynamics and selection of macrolide resistance in M. genitalium during this treatment. Microscopy and real-time PCRs were used to diagnose urethritis and non-viral STIs, respectively, in males (n = 320). M. genitalium positive patients were treated with recommended josamycin regimen and treatment efficacy was monitored using quantitative real-time PCR. Macrolide resistance mutations were identified using sequencing of the 23S rRNA gene. Forty-seven (14.7%) males were positive for M. genitalium only and most (85.1%) of these had symptoms and signs of urethritis. Forty-six (97.9%) males agreed to participate in the treatment efficacy monitoring. All the pre-treatment M. genitalium specimens had wild-type 23S rRNA. The elimination of M. genitalium DNA was substantially faster in patients with lower pre-treatment M. genitalium load, and the total eradication rate was 43/46 (93.5%). Of the six patients with high pre-treatment M. genitalium load, three (50%) remained positive post-treatment and these positive specimens contained macrolide resistance mutations in the 23S rRNA gene, i.e., A2059G (n = 2) and A2062G (n = 1). M. genitalium was a frequent cause of male urethritis in Moscow, Russia. The pre-treatment M. genitalium load might be an effective predictor of eradication efficacy with macrolides (and possibly

Industrial wastewater treatment network based on recycling and rerouting strategies for retrofit design schemes

DEFF Research Database (Denmark)

Sueviriyapan, Natthapong; Suriyapraphadilok, Uthaiporn; Siemanond, Kitipat

2015-01-01

a generic model-based synthesis and design framework for retrofit wastewater treatment networks (WWTN) of an existing industrial process. The developed approach is suitable for grassroots and retrofit systems and adaptable to a wide range of wastewater treatment problems. A sequential solution procedure...... is employed to solve a network superstructure-based optimization problem formulated as Mixed Integer Linear and/or Non-Linear Programming (MILP/MINLP). Data from a petroleum refinery effluent treatment plant together with special design constraints are employed to formulate different design schemes based...... for the future development of the existing wastewater treatment process....

Using AHP for Selecting the Best Wastewater Treatment Process

Directory of Open Access Journals (Sweden)

AbdolReza Karimi

2011-01-01

Full Text Available In this paper, Analytical Hierarchy Process (AHP method that is based on expert knowledge is used for the selection of the optimal anaerobic wastewater treatment process in industrial estates. This method can be applied for complicated multi-criteria decision making to obtain reasonable results. The different anaerobic processes employed in Iranian industrial estates consist of UASB, UAFB, ABR, Contact process, and Anaerobic Lagoons. Based on the general conditions in wastewater treatment plants in industrial estates and on expert judgments and using technical, economic, environmental, and administrative criteria, the processes are weighted and the results obtained are assessed using the Expert Choice Software. Finally, the five processes investigated are ranked as 1 to 5 in a descending order of UAFB, ABR, UASB, Anaerobic Lagoon, and Contact Process. Sensitivity analysis showing the effects of input parameters on changes in the results was applied for technical, economic, environmental, and administrative criteria.

Sodium-Bearing Waste Treatment, Applied Technology Plan

International Nuclear Information System (INIS)

Lance Lauerhass; Vince C. Maio; S. Kenneth Merrill; Arlin L. Olson; Keith J. Perry

2003-01-01

Settlement Agreement between the Department of Energy and the State of Idaho mandates treatment of sodium-bearing waste at the Idaho Nuclear Technology and Engineering Center within the Idaho National Engineering and Environmental Laboratory. One of the requirements of the Settlement Agreement is to complete treatment of sodium-bearing waste by December 31, 2012. Applied technology activities are required to provide the data necessary to complete conceptual design of four identified alternative processes and to select the preferred alternative. To provide a technically defensible path forward for the selection of a treatment process and for the collection of needed data, an applied technology plan is required. This document presents that plan, identifying key elements of the decision process and the steps necessary to obtain the required data in support of both the decision and the conceptual design. The Sodium-Bearing Waste Treatment Applied Technology Plan has been prepared to provide a description/roadmap of the treatment alternative selection process. The plan details the results of risk analyzes and the resulting prioritized uncertainties. It presents a high-level flow diagram governing the technology decision process, as well as detailed roadmaps for each technology. The roadmaps describe the technical steps necessary in obtaining data to quantify and reduce the technical uncertainties associated with each alternative treatment process. This plan also describes the final products that will be delivered to the Department of Energy Idaho Operations Office in support of the office's selection of the final treatment technology

Sodium-Bearing Waste Treatment, Applied Technology Plan

Energy Technology Data Exchange (ETDEWEB)

Lance Lauerhass; Vince C. Maio; S. Kenneth Merrill; Arlin L. Olson; Keith J. Perry

2003-06-01

Settlement Agreement between the Department of Energy and the State of Idaho mandates treatment of sodium-bearing waste at the Idaho Nuclear Technology and Engineering Center within the Idaho National Engineering and Environmental Laboratory. One of the requirements of the Settlement Agreement is to complete treatment of sodium-bearing waste by December 31, 2012. Applied technology activities are required to provide the data necessary to complete conceptual design of four identified alternative processes and to select the preferred alternative. To provide a technically defensible path forward for the selection of a treatment process and for the collection of needed data, an applied technology plan is required. This document presents that plan, identifying key elements of the decision process and the steps necessary to obtain the required data in support of both the decision and the conceptual design. The Sodium-Bearing Waste Treatment Applied Technology Plan has been prepared to provide a description/roadmap of the treatment alternative selection process. The plan details the results of risk analyzes and the resulting prioritized uncertainties. It presents a high-level flow diagram governing the technology decision process, as well as detailed roadmaps for each technology. The roadmaps describe the technical steps necessary in obtaining data to quantify and reduce the technical uncertainties associated with each alternative treatment process. This plan also describes the final products that will be delivered to the Department of Energy Idaho Operations Office in support of the office's selection of the final treatment technology.

Culture, Personality, Health, and Family Dynamics: Cultural Competence in the Selection of Culturally Sensitive Treatments

Science.gov (United States)

Sperry, Len

2010-01-01

Cultural sensitivity and cultural competence in the selection of culturally sensitive treatments is a requisite for effective counseling practice in working with diverse clients and their families, particularly when clients present with health issues or medical problems. Described here is a strategy for selecting culturally sensitive treatments…

Guidelines for the design and operation of makeup water treatment systems

International Nuclear Information System (INIS)

Lee, Y.H.; Planek, M.A.; Sopocy, D.M.; Tomaga, C.M.; Abrams, I.M.; Anderson, C.C.; Balazs, M.K.; Houskava, J.; Williams, R.

1989-06-01

These guidelines present the industry with a standardized program to ensure the optimum design and operation of their individual makeup water treatment systems. These guidelines present, in a non-technical and non-proprietary format, the makeup water treatment system design and operating topics that are discussed in detail in Volumes 1 and 2 of NP-6377-SL. The individual guidelines contained in Volumes 1 and 2 are presented as separate imperative statements, followed by a technical justification discussion, which provides further explanations. In addition and when applicable, the guidelines relate pertinent operational in regard to monitoring parameters for operation, alternative actions, troubleshooting, management responsibilities and shutdown practices. Design considerations are also addressed, when applicable, in regard to equipment cost and advantages and disadvantages for the design recommendations. Appendices provide background information for performance criteria, component description, economic evaluation procedures and definitions. 4 refs

Impact of treatment and re-treatment with artemether-lumefantrine and artesunate-amodiaquine on selection of Plasmodium falciparum multidrug resistance gene-1 polymorphisms in the Democratic Republic of Congo and Uganda

DEFF Research Database (Denmark)

Baraka, Vito; Mavoko, Hypolite Muhindo; Nabasumba, Carolyn

2018-01-01

fragment length polymorphism (RFLP) assays. RESULTS: The pre-treatment prevalence of Pfmdr1 N86 and D1246Y varied significantly between the sites, (p>0.001) and (p = 0.013), respectively. There was borderline significant directional selection for Pfmdr1 184F in recurrent malaria infections after treatment...... with AL in Uganda site (p = 0.05). Pfmdr1 NFD haplotype did not significantly change in post-treatment infections after re-treatment with either AL or ASAQ. Comparison between pre-treatment and post-treatment recurrences did not indicate directional selection of Pfmdr1 N86, D1246 alleles in the pre......BACKGROUND: The emergence of resistance against artemisinin combination treatment is a major concern for malaria control. ACTs are recommended as the rescue treatment, however, there is limited evidence as to whether treatment and re-treatment with ACTs select for drug-resistant P. falciparum...

The selective angiographic diagnosis and endovascular embolization treatment of severe epistaxis

International Nuclear Information System (INIS)

Zhang Xiquan; Lu Yonghong; Sun Jinghua; Guo Deqiang; Li Yuzhen; Wei Aihua

2002-01-01

Objective: To evaluate selective angiographic diagnosis and embolization of severe epistaxis in 57 cases. Methods: 41 cases with spontaneous haemorrhage, 11 cases with traumatic haemorrhage, 3 cases with haemorrhage of nasopharyngeal fibroangioma, and 2 case with haemorrhage of nasopharyngeal carcinoma were included in the study. Selective angiographic diagnosis and embolization of epistaxis were performed with absorbable gelatin sponge or balloon or spring coil by using Seldinger's method. Results: 59 procedure of angiographic diagnosis and embolization were performed in 57 cases. Both maxillaris internal artery embolization was performed in 6 cases. After embolization, satisfactory results were achieved immediately in 55 cases. After 6 months to 2 years' follow-up, no haemorrhage recurred. In 4 cases with traumatic haemorrhage in the face, simple maxillaris internal artery embolization was performed in 2 cases. Conclusion: Selective angiographic diagnosis and embolization are safe, effective, and successful method of choices in the treatment of severe epistaxis

Effects of selective serotonin reuptake inhibitor treatment on plasma oxytocin and cortisol in major depressive disorder.

Science.gov (United States)

Keating, Charlotte; Dawood, Tye; Barton, David A; Lambert, Gavin W; Tilbrook, Alan J

2013-04-29

Oxytocin is known for its capacity to facilitate social bonding, reduce anxiety and for its actions on the stress hypothalamopituitary adrenal (HPA) axis. Since oxytocin can physiologically suppress activity of the HPA axis, clinical applications of this neuropeptide have been proposed in conditions where the function of the HPA axis is dysregulated. One such condition is major depressive disorder (MDD). Dysregulation of the HPA system is the most prominent endocrine change seen with MDD, and normalizing the HPA axis is one of the major targets of recent treatments. The potential clinical application of oxytocin in MDD requires improved understanding of its relationship to the symptoms and underlying pathophysiology of MDD. Previous research has investigated potential correlations between oxytocin and symptoms of MDD, including a link between oxytocin and treatment related symptom reduction. The outcomes of studies investigating whether antidepressive treatment (pharmacological and non-pharmacological) influences oxytocin concentrations in MDD, have produced conflicting outcomes. These outcomes suggest the need for an investigation of the influence of a single treatment class on oxytocin concentrations, to determine whether there is a relationship between oxytocin, the HPA axis (e.g., oxytocin and cortisol) and MDD. Our objective was to measure oxytocin and cortisol in patients with MDD before and following treatment with selective serotonin reuptake inhibitors, SSRI. We sampled blood from arterial plasma. Patients with MDD were studied at the same time twice; pre- and post- 12 weeks treatment, in an unblinded sequential design (clinicaltrials.govNCT00168493). Results did not reveal differences in oxytocin or cortisol concentrations before relative to following SSRI treatment, and there were no significant relationships between oxytocin and cortisol, or these two physiological variables and psychological symptom scores, before or after treatment. These outcomes

Modelling the consequences of targeted selective treatment strategies on performance and emergence of anthelmintic resistance amongst grazing calves

Directory of Open Access Journals (Sweden)

Zoe Berk

2016-12-01

Full Text Available The development of anthelmintic resistance by helminths can be slowed by maintaining refugia on pasture or in untreated hosts. Targeted selective treatments (TST may achieve this through the treatment only of individuals that would benefit most from anthelmintic, according to certain criteria. However TST consequences on cattle are uncertain, mainly due to difficulties of comparison between alternative strategies. We developed a mathematical model to compare: 1 the most ‘beneficial’ indicator for treatment selection and 2 the method of selection of calves exposed to Ostertagia ostertagi, i.e. treating a fixed percentage of the population with the lowest (or highest indicator values versus treating individuals who exceed (or are below a given indicator threshold. The indicators evaluated were average daily gain (ADG, faecal egg counts (FEC, plasma pepsinogen, combined FEC and plasma pepsinogen, versus random selection of individuals. Treatment success was assessed in terms of benefit per R (BPR, the ratio of average benefit in weight gain to change in frequency of resistance alleles R (relative to an untreated population. The optimal indicator in terms of BPR for fixed percentages of calves treated was plasma pepsinogen and the worst ADG; in the latter case treatment was applied to some individuals who were not in need of treatment. The reverse was found when calves were treated according to threshold criteria, with ADG being the best target indicator for treatment. This was also the most beneficial strategy overall, with a significantly higher BPR value than any other strategy, but its degree of success depended on the chosen threshold of the indicator. The study shows strong support for TST, with all strategies showing improvements on calves treated selectively, compared with whole-herd treatment at 3, 8, 13 weeks post-turnout. The developed model appeared capable of assessing the consequences of other TST strategies on calf populations.

Collagenase Clostridium histolyticum in the treatment of Peyronie’s disease: patient selection and perspectives

Directory of Open Access Journals (Sweden)

Kuhlmann PK

2017-03-01

Full Text Available Paige K Kuhlmann,1 Kenneth J DeLay,2 James Anaissie,2 Wayne JG Hellstrom,2 Faysal A Yafi3 1University of Missouri-Columbia School of Medicine, Columbia, MO, 2Department of Urology, Tulane University School of Medicine, New Orleans, LA, 3Department of Urology, University of California Irvine, Orange, CA, USA Abstract: The safety and efficacy of the use of collagenase Clostridium histolyticum (CCH for the treatment of Peyronie’s disease has been confirmed over the past several years. However, identification of the ideal patient population for use of this treatment is not well established. Multiple studies have attempted to delineate various patient-specific factors that may predict response to treatment with CCH, with the intent of enhancing patient selection. To date, these include baseline curvature severity, duration of disease, disease phase at presentation, plaque calcification, baseline erectile function, plaque size, age, comorbid diabetes, previous penile trauma, responsiveness to first treatment cycle, baseline penile shortening or pain, prior treatment with intralesional injection, compliance with plaque modeling, and atypical curvature. In addition, other studies have sought to explore various aspects of treatment with CCH that may affect patient perspective of treatment. They have focused on patient-reported outcomes, female partner considerations, cost of treatment, and potential confounders of patient satisfaction. This review provides a summary and analysis of currently available literature on topics of patient selection and perspectives in regard to treatment of Peyronie’s disease with CCH. Keywords: Peyronie’s disease, collagenase Clostridium histolyticum, Peyronie’s disease questionnaire, curvature deformity, intralesional injection, erectile function

Designing Multifunctionality into Single Phase and Multiphase Metal-Oxide-Selective Propylene Ammoxidation Catalysts

Directory of Open Access Journals (Sweden)

James F. Brazdil

2018-03-01

Full Text Available Multifunctionality is the hallmark of most modern commercial heterogeneous catalyst systems in use today, including those used for the selective ammoxidation of propylene to acrylonitrile. It is the quintessential principle underlying commercial catalyst design efforts since petrochemical process development is invariably driven by the need to reduce manufacturing costs. This is in large part achieved through new and improved catalysts that increase selectivity and productivity. In addition, the future feedstocks for chemical processes will be invariably more refractory than those currently in use (e.g., replacing alkenes with alkanes or using CO2, thus requiring a disparate combination of chemical functions in order to effect multiple chemical transformations with the fewest separate process steps. This review summarizes the key chemical phenomena behind achieving the successful integration of multiple functions into a mixed-metal-oxide-selective ammoxidation catalyst. An experiential and functional catalyst design model is presented that consists of one or both of the following components: (1 a mixed-metal-oxide–solid solution where the individual metal components serve separate and necessary functions in the reaction mechanism through their atomic level interaction in the context of a single crystallographic structure; (2 the required elemental components and their catalytic function existing in separate phases, where these phases are able to interact for the purposes of electron and lattice oxygen transfer through the formation of a structurally coherent interface (i.e., epitaxy between the separate crystal structures. Examples are provided from the literature and explained in the context of this catalyst design model. The extension of the model concepts to the design of heterogeneous catalysts in general is also discussed.

Study-design selection criteria in systematic reviews of effectiveness of health systems interventions and reforms: A meta-review.

Science.gov (United States)

Rockers, Peter C; Feigl, Andrea B; Røttingen, John-Arne; Fretheim, Atle; de Ferranti, David; Lavis, John N; Melberg, Hans Olav; Bärnighausen, Till

2012-03-01

At present, there exists no widely agreed upon set of study-design selection criteria for systematic reviews of health systems research, except for those proposed by the Cochrane Collaboration's Effective Practice and Organisation of Care (EPOC) review group (which comprises randomized controlled trials, controlled clinical trials, controlled before-after studies, and interrupted time series). We conducted a meta-review of the study-design selection criteria used in systematic reviews available in the McMaster University's Health Systems Evidence or the EPOC database. Of 414 systematic reviews, 13% did not indicate any study-design selection criteria. Of the 359 studies that described such criteria, 50% limited their synthesis to controlled trials and 68% to some or all of the designs defined by the EPOC criteria. Seven out of eight reviews identified at least one controlled trial that was relevant for the review topic. Seven percent of the reviews included either no or only one relevant primary study. Our meta-review reveals reviewers' preferences for restricting synthesis to controlled experiments or study designs that comply with the EPOC criteria. We discuss the advantages and disadvantages of the current practices regarding study-design selection in systematic reviews of health systems research as well as alternative approaches. Copyright © 2012. Published by Elsevier Ireland Ltd.

Bright ideas. Some rules of thumb for interior lighting design and selection.

Science.gov (United States)

Hunter, Claudia M

2002-07-01

Interior lighting design and selection can be a demanding assignment for a health facilities manager or department head. It requires a balance between conflicting needs, such as providing good task lighting for a nursing station while also shielding luminaires that are visible from patients' rooms to avoid glare.

78 FR 11207 - Clinical Study Designs for Surgical Ablation Devices for Treatment of Atrial Fibrillation...

Science.gov (United States)

2013-02-15

...] Clinical Study Designs for Surgical Ablation Devices for Treatment of Atrial Fibrillation; Guidance for... devices intended for the treatment of atrial fibrillation. DATES: Submit either electronic or written... Study Designs for Surgical Ablation Devices for Treatment of Atrial Fibrillation'' to the Division of...

Criteria for selecting children with special needs for dental treatment under general anaesthesia

OpenAIRE

Nova García, M. Joaquín de; Gallardo López, Nuria E.; Martín Sanjuán, Carmen; Mourelle Martínez, M. Rosa; Alonso García, Yolanda; Carracedo Cabaleiro, Esther

2007-01-01

Objective: To study criteria for helping to select children with special needs for dental treatment under general anaesthesia. Materials and methods: Group of 30 children (aged under 18) examined on the Course at the Universidad Complutense de Madrid (UCM) (Specialisation on holistic dental treatment of children with special needs) and subsequently referred to the Disabled Children’s Oral Health Unit (DCOHU) within Primary Health Care Area 2 of the Madrid Health Service (SERMAS) where dental ...

Fuzzy Axiomatic Design approach based green supplier selection

DEFF Research Database (Denmark)

Kannan, Devika; Govindan, Kannan; Rajendran, Sivakumar

2015-01-01

proposes a multi-criteria decision-making (MCDM) approach called Fuzzy Axiomatic Design (FAD) to select the best green supplier for Singapore-based plastic manufacturing company. At first, the environmental criteria was developed along with the traditional criteria based on the literature review......Abstract Green Supply Chain Management (GSCM) is a developing concept recently utilized by manufacturing firms of all sizes. All industries, small or large, seek improvements in the purchasing of raw materials, manufacturing, allocation, transportation efficiency, in curbing storage time, importing...... responsible in addition to being efficiently managed. A significant way to implement responsible GSCM is to reconsider, in innovative ways, the purchase and supply cycle, and a preliminary step would be to ensure that the supplier of goods successfully incorporates green criteria. Therefore, this paper...

Xamoterol, a new selective beta-1-adrenoceptor partial agonist, in the treatment of postural hypotension

DEFF Research Database (Denmark)

Mehlsen, J; Trap-Jensen, J

1986-01-01

Three patients severely disabled from postural hypotension were treated with xamoterol, a selective beta-1-adrenoceptor antagonist with a high degree of partial agonist activity. Oral treatment (200 mg b.i.d.) was chosen on the basis of the effects of acute intravenous administration of xamoterol...... and pindolol, a non-selective beta-adrenoceptor antagonist with partial agonist activity. In these patients pindolol had a predominantly antagonist effect, whereas xamoterol had a predominantly agonist effect after intravenous administration. Oral treatment was carried out with placebo control in a single......, supine). During the placebo period (2 weeks) heart rate decreased to pretreatment levels and mean blood pressure was reduced by only 14 mmHg. The patients reported substantial improvement in their condition during active medication. Xamoterol seems to be a useful alternative in the treatment of postural...

Evaluation of selected neutralizing agents for the treatment of uranium tailings leachates. Laboratory progress report

International Nuclear Information System (INIS)

Sherwood, D.R.; Serne, R.J.

1983-02-01

Laboratory experiments were conducted to evaluate the performance of selected neutralizing agents for the treatment of uranium tailings solutions. Highly acidic tailings solutions (pH 3 ) reagent grade; Calcium hydroxide [Ca(OH) 2 ] reagent grade; Magnesium oxide (MgO) reagent grade; Sodium carbonate (Na 2 CO 3 ) reagent grade; and Sodium hydroxide (NaOH) reagent grade. Evaluation of the effectiveness for the treatment of uranium tailings solutions for the selected neutralizing agents under controlled laboratory conditions was based on three criteria. The criteria are: (1) treated effluent water quality, (2) neutralized sludge handling and hydraulic properties, and (3) reagent costs and acid neutralizing efficiency. On the basis of these limited laboratory results calcium hydroxide or its dehydrated form CaO (lime) appears to be the most effective option for treatment of uranium tailings solutions

Diminished Neural Processing of Aversive and Rewarding Stimuli During Selective Serotonin Reuptake Inhibitor Treatment

Science.gov (United States)

McCabe, Ciara; Mishor, Zevic; Cowen, Philip J.; Harmer, Catherine J.

2010-01-01

Background Selective serotonin reuptake inhibitors (SSRIs) are popular medications for anxiety and depression, but their effectiveness, particularly in patients with prominent symptoms of loss of motivation and pleasure, has been questioned. There are few studies of the effect of SSRIs on neural reward mechanisms in humans. Methods We studied 45 healthy participants who were randomly allocated to receive the SSRI citalopram, the noradrenaline reuptake inhibitor reboxetine, or placebo for 7 days in a double-blind, parallel group design. We used functional magnetic resonance imaging to measure the neural response to rewarding (sight and/or flavor of chocolate) and aversive stimuli (sight of moldy strawberries and/or an unpleasant strawberry taste) on the final day of drug treatment. Results Citalopram reduced activation to the chocolate stimuli in the ventral striatum and the ventral medial/orbitofrontal cortex. In contrast, reboxetine did not suppress ventral striatal activity and in fact increased neural responses within medial orbitofrontal cortex to reward. Citalopram also decreased neural responses to the aversive stimuli conditions in key “punishment” areas such as the lateral orbitofrontal cortex. Reboxetine produced a similar, although weaker effect. Conclusions Our findings are the first to show that treatment with SSRIs can diminish the neural processing of both rewarding and aversive stimuli. The ability of SSRIs to decrease neural responses to reward might underlie the questioned efficacy of SSRIs in depressive conditions characterized by decreased motivation and anhedonia and could also account for the experience of emotional blunting described by some patients during SSRI treatment. PMID:20034615

Isolation of cells for selective treatment and analysis using a magnetic microfluidic chip

KAUST Repository

Yassine, Omar

2014-05-01

This study describes the development and testing of a magnetic microfluidic chip (MMC) for trapping and isolating cells tagged with superparamagnetic beads (SPBs) in a microfluidic environment for selective treatment and analysis. The trapping and isolation are done in two separate steps; first, the trapping of the tagged cells in a main channel is achieved by soft ferromagnetic disks and second, the transportation of the cells into side chambers for isolation is executed by tapered conductive paths made of Gold (Au). Numerical simulations were performed to analyze the magnetic flux and force distributions of the disks and conducting paths, for trapping and transporting SPBs. The MMC was fabricated using standard microfabrication processes. Experiments were performed with E. coli (K12 strand) tagged with 2.8 μm SPBs. The results showed that E. coli can be separated from a sample solution by trapping them at the disk sites, and then isolated into chambers by transporting them along the tapered conducting paths. Once the E. coli was trapped inside the side chambers, two selective treatments were performed. In one chamber, a solution with minimal nutrition content was added and, in another chamber, a solution with essential nutrition was added. The results showed that the growth of bacteria cultured in the second chamber containing nutrient was significantly higher, demonstrating that the E. coli was not affected by the magnetically driven transportation and the feasibility of performing different treatments on selectively isolated cells on a single microfluidic platform.

Minimization of storage and disposal volumes by treatment of liquids by highly selective ion exchangers

International Nuclear Information System (INIS)

Tusa, E.; Harjula, R.; Lehto, J.

2000-01-01

Novel highly selective inorganic ion exchangers provide new efficient methods for the treatment of nuclear waste liquids. These methods have several advantages compared to conventional technologies such as evaporation, direct solidification or treatment by organic ion exchange resins. Due to high selectivity, the radionuclides can be concentrated to a very small volume even from high-salt effluents. This means that the volume waste will be very small compared to other methods, which brings considerable savings in the cost of intermediate storage and final disposal. Process equipment are highly compact and require little supervision, which brings down the capital and operation costs. The new selective inorganic ion exchangers CsTreat, SrTreat and CoTreat (manufactured by Fortum Engineering Ltd., Finland) have the highest selectivities and processing capacities, exceeding those of zeolites by several orders of magnitude. The materials are now in use in a number of nuclear sites worldwide, including those in the USA, Europe and Japan. Installations include mobile and stationary systems. Considerable experience has been gained in the use of these new materials. Lessons learned, as well as advantages and economic benefits of these highly selective exchangers will be discussed in this paper. (authors)

SELECTIVE INTRA-ARTERIAL CHEMOTHERAPY (IAC IN TREATMENT AT CHILDREN WITH THE INTRAOCULAR RETYNOBLASTOMA

Directory of Open Access Journals (Sweden)

I. V. Pogrebnyakov

2018-01-01

Full Text Available Treatment of intraocular retinoblastoma is challenging. It requires a multidisciplinary personalized approach that includes focal treatments, chemotherapy, surgery and radiotherapy. Today, the focus of therapy has shifted to eye preservation with the major aim to save the child’s life and to preserve the eyeball as a functioning organ of vision with minimal complications. One of the most promising therapy approaches is selective intra-arterial chemotherapy (IAC, by which a cytostatic agent is given directly into the eye. This treatment modality has been shown to provide survival benefit and improvement of quality of life, reducing toxicity and minimizing side effects.

Influences on the start, selection and duration of treatment with antibiotics in long-term care facilities.

Science.gov (United States)

Daneman, Nick; Campitelli, Michael A; Giannakeas, Vasily; Morris, Andrew M; Bell, Chaim M; Maxwell, Colleen J; Jeffs, Lianne; Austin, Peter C; Bronskill, Susan E

2017-06-26

Understanding the extent to which current antibiotic prescribing behaviour is influenced by clinicians' historical patterns of practice will help target interventions to optimize antibiotic use in long-term care. Our objective was to evaluate whether clinicians' historical prescribing behaviours influence the start, prolongation and class selection for treatment with antibiotics in residents of long-term care facilities. We conducted a retrospective cohort study of all physicians who prescribed to residents in long-term care facilities in Ontario between Jan. 1 and Dec. 31, 2014. We examined variability in antibiotic prescribing among physicians for 3 measures: start of treatment with antibiotics, use of prolonged durations exceeding 7 days and selection of fluoroquinolones. Funnel plots with control limits were used to determine the extent of variation and characterize physicians as extreme low, low, average, high and extreme high prescribers for each tendency. Multivariable logistic regression was used to assess whether a clinician's prescribing tendency in the previous year predicted current prescribing patterns, after accounting for residents' demographics, comorbidity, functional status and indwelling devices. Among 1695 long-term care physicians, who prescribed for 93 132 residents, there was wide variability in the start of antibiotic treatment (median 45% of patients, interquartile range [IQR] 32%-55%), use of prolonged treatment durations (median 30% of antibiotic prescriptions, IQR 19%-46%) and selection of fluoroquinolones (median 27% of antibiotic prescriptions, IQR 18%-37%). Prescribing tendencies for antibiotics by physicians in 2014 correlated strongly with tendencies in the previous year. After controlling for individual resident characteristics, prior prescribing tendency was a significant predictor of current practice. Physicians prescribing antibiotics exhibited individual, measurable and historical tendencies toward start of antibiotic treatment

Effect of heat treatment on mechanical properties and microstructure of selective laser melting 316L stainless steel

Science.gov (United States)

Kamariah, M. S. I. N.; Harun, W. S. W.; Khalil, N. Z.; Ahmad, F.; Ismail, M. H.; Sharif, S.

2017-10-01

Selective Laser Melting (SLM) has been one of the preferred Additive Manufacturing process to fabricate parts due to its merits in terms of design freedom, lower material waste and faster production when compare to the conventional manufacturing processes. However, due to the thermal gradient experienced during the process, the parts are exposed to the residual stress that leads to parts distortion. This work presents the effect of heat treatments on the micro-hardness of 316L stainless steel parts. In current study, SLM has been employed to fabricate 316L stainless steel compacts. Different heat treatments of 650°C, 950°C, and 1100°C for 2 hours were applied on the compacts. Hardness test were performed on the as-built and heat-treated compacts. The relationship between the microstructures and micro-hardness were discussed in this paper. The results revealed that the micro-hardness of the as-built compacts is between 209.0 and 212.2 HV, which is much higher than the heattreated compacts.

The design of a novel, environmentally improved cotton pre-treatment proces

NARCIS (Netherlands)

Bouwhuis, G.H. (Gerrit)

2011-01-01

The scope of this thesis of Gerrit Bouwhuis, lecturer at Saxion Research Centre for Design and Technology in Enschede is the development of a new industrial applicable pre-treatment process for cotton based on catalysis. The pre-treatment generally consists of desizing, scouring and bleaching. These

[Cost-effectiveness analysis of celecoxib versus non-selective non-steroidal anti-inflammatory drug therapy for the treatment of osteoarthritis in Spain: A current perspective].

Science.gov (United States)

De Lossada, A; Oteo-Álvaro, Á; Giménez, S; Oyagüez, I; Rejas, J

2016-01-01

To assess the cost-effectiveness of celecoxib and non-selective non-steroidal anti-inflammatory drugs for the treatment of osteoarthritis in clinical practice in Spain. A decision-tree model using distribution, doses, treatment duration and incidence of GI and CV events observed in the pragmatic PROBE-designed «GI-Reasons» trial was used for cost-effectiveness. Effectiveness was expressed in terms of event averted and quality-adjusted life-years (QALY) gained. QALY were calculated based on utility decrement in case of any adverse events reported in GI-Reasons trial. The National Health System perspective in Spain was applied; cost calculations included current prices of drugs plus cost of adverse events occurred. The analysis was expressed as an incremental cost-effectiveness ratio per QALY gained and per event averted. One-way and probabilistic analyses were performed. Compared with non-selective non-steroidal anti-inflammatory drugs, at current prices, celecoxib treatment had higher overall treatment costs €201 and €157, respectively. However, celecoxib was associated with a slight increase in QALY gain and significantly lower incidence of gastrointestinal events (pcost-effectiveness ratio of €13,286 per QALY gained and €4,471 per event averted. Sensitivity analyses were robust, and confirmed the results of the base case. Celecoxib at current price may be considered as a cost-effective alternative vs. non-selective non-steroidal anti-inflammatory drugs in the treatment of osteoarthritis in daily practice in the Spanish NHS. Copyright © 2015 Sociedad Española de Médicos de Atención Primaria (SEMERGEN). Publicado por Elsevier España, S.L.U. All rights reserved.

Pricing Mechanism Design for Centralized Pollutant Treatment with SME Alliances

Directory of Open Access Journals (Sweden)

Yuyu Li

2016-06-01

Full Text Available In this paper, we assume that a professional pollutant treatment enterprise treats all of the pollutants emitted by multiple small and medium-sized enterprises (SMEs. In order to determine the treatment price, SMEs can bargain with the pollutant treatment enterprise individually, or through forming alliances. We propose a bargaining game model of centralized pollutant treatment to study how the pollutant treatment price is determined through negotiation. Then, we consider that there is a moral hazard from SMEs in centralized pollutant treatment; in other words, they may break their agreement concerning their quantities of production and pollutant emissions with the pollutant treatment enterprise. We study how the pollutant treatment enterprise can prevent this by pricing mechanism design. It is found that the pollutant treatment enterprise can prevent SMEs’ moral hazard through tiered pricing. If the marginal treatment cost of the pollutant treatment enterprise is a constant, SMEs could bargain with the pollutant treatment enterprise individually, otherwise, they should form a grand alliance to bargain with it as a whole.

Pricing Mechanism Design for Centralized Pollutant Treatment with SME Alliances.

Science.gov (United States)

Li, Yuyu; Huang, Bo; Tao, Fengming

2016-06-22

In this paper, we assume that a professional pollutant treatment enterprise treats all of the pollutants emitted by multiple small and medium-sized enterprises (SMEs). In order to determine the treatment price, SMEs can bargain with the pollutant treatment enterprise individually, or through forming alliances. We propose a bargaining game model of centralized pollutant treatment to study how the pollutant treatment price is determined through negotiation. Then, we consider that there is a moral hazard from SMEs in centralized pollutant treatment; in other words, they may break their agreement concerning their quantities of production and pollutant emissions with the pollutant treatment enterprise. We study how the pollutant treatment enterprise can prevent this by pricing mechanism design. It is found that the pollutant treatment enterprise can prevent SMEs' moral hazard through tiered pricing. If the marginal treatment cost of the pollutant treatment enterprise is a constant, SMEs could bargain with the pollutant treatment enterprise individually, otherwise, they should form a grand alliance to bargain with it as a whole.

Tools for Material Design and Selection

Science.gov (United States)

Wehage, Kristopher

The present thesis focuses on applications of numerical methods to create tools for material characterization, design and selection. The tools generated in this work incorporate a variety of programming concepts, from digital image analysis, geometry, optimization, and parallel programming to data-mining, databases and web design. The first portion of the thesis focuses on methods for characterizing clustering in bimodal 5083 Aluminum alloys created by cryomilling and powder metallurgy. The bimodal samples analyzed in the present work contain a mixture of a coarse grain phase, with a grain size on the order of several microns, and an ultra-fine grain phase, with a grain size on the order of 200 nm. The mixing of the two phases is not homogeneous and clustering is observed. To investigate clustering in these bimodal materials, various microstructures were created experimentally by conventional cryomilling, Hot Isostatic Pressing (HIP), Extrusion, Dual-Mode Dynamic Forging (DMDF) and a new 'Gradient' cryomilling process. Two techniques for quantitative clustering analysis are presented, formulated and implemented. The first technique, the Area Disorder function, provides a metric of the quality of coarse grain dispersion in an ultra-fine grain matrix and the second technique, the Two-Point Correlation function, provides a metric of long and short range spatial arrangements of the two phases, as well as an indication of the mean feature size in any direction. The two techniques are implemented on digital images created by Scanning Electron Microscopy (SEM) and Electron Backscatter Detection (EBSD) of the microstructures. To investigate structure--property relationships through modeling and simulation, strategies for generating synthetic microstructures are discussed and a computer program that generates randomized microstructures with desired configurations of clustering described by the Area Disorder Function is formulated and presented. In the computer program, two

Effect of different oral oxytetracycline treatment regimes on selection of antimicrobial resistant coliforms in nursery pigs.

Science.gov (United States)

Herrero-Fresno, Ana; Zachariasen, Camilla; Nørholm, Nanna; Holm, Anders; Christiansen, Lasse Engbo; Olsen, John Elmerdahl

2017-09-01

A major concern derived from using antimicrobials in pig production is the development of resistance. This study aimed to assess the impact of selected combinations of oral dose and duration of treatment with oxytetracycline (OTC) on selection of tetracycline resistant (TET-R) coliforms recovered from swine feces. The work encompassed two studies: 1) OTC 5mg/kg and 20mg/kg were administered to nursery pigs for 3 and 10days, respectively, under controlled experimental conditions, and 2) 10mg/kg, 20mg/kg and 30mg/kg OTC were given to a higher number of pigs for 6, 3 and 2days, respectively, under field conditions. Statistical modeling was applied to analyze trends in the proportion of TET-R coliforms. In the experimental study, no statistical difference in proportion of TET-R coliforms was observed between treatments at the end of the trial (day 18) and compared to day 0. In the field study, treatment had a significant effect on the proportion of TET-R bacteria two days after the end of treatment (2dAT) with the regimes "low dose-six days" and "medium dose-three days" yielding the highest and lowest proportions of TET-R strains, respectively. No indication of co-selection for ampicillin- and sulphonamide -R bacteria was observed for any treatment at 2dAT. By the end of the nursery period, the proportion of TET-R bacteria was not significantly different between treatments and compared to day 0. Our results suggest that similar resistance levels might be obtained by using different treatment regimes regardless of the combinations of oral dose-duration of treatment. Copyright © 2017 Elsevier B.V. All rights reserved.

Selection criteria for wastewater treatment technologies to protect drinking water.

Science.gov (United States)

von Sperling, M

2000-01-01

The protection of water bodies used as sources for drinking water is intimately linked to the adoption of adequate technologies for the treatment of the wastewater generated in the catchment area. The paper presents a general overview of the main technologies used for the treatment of domestic sewage, with a special emphasis on developing countries, and focussing on the main parameters of interest, such as BOD, coliforms and nutrients. A series of tables, figures and charts that can be used for the preliminary selection of treatment technologies is presented. The systems analysed are: stabilisation ponds, activated sludge, trickling filters, anaerobic systems and land disposal. Within each system, the main process variants are covered. Two summary tables are presented, one for quantitative analysis, including easily usable information based on per capita values (US$/cap, Watts/cap, m2 area/cap, m3 sludge/cap), and another for a qualitative comparison among the technologies, based on a one-to-five-star scoring system. The recent trend in tropical countries in the use of UASB (Upflow Anaerobic Sludge Blanket) reactors is also discussed.

Selective androgen receptor modulators: in pursuit of tissue-selective androgens.

Science.gov (United States)

Omwancha, Josephat; Brown, Terry R

2006-10-01

The androgen receptor mediates the androgenic and anabolic activity of the endogenous steroids testosterone and 5alpha-dihydrotestosterone. Current knowledge of the androgen receptor protein structure, and the molecular mechanisms surrounding the binding properties and activities of agonists and antagonists has led to the design and development of novel nonsteroidal ligands with selected tissue-specific androgen receptor agonist and antagonist activities. The activity of these compounds, termed selective androgen receptor modulators (SARMs), is directed toward the maintenance or enhancement of anabolic effects on bone and muscle with minimal androgenic effects on prostate growth. SARMs are of potential therapeutic value in the treatment of male hypogonadism, osteoporosis, frailty and muscle wasting, burn injury and would healing, anemia, mood and depression, benign prostatic hyperplasia and prostate cancer.

An integrated approach to route selection in slurry pipeline design

Energy Technology Data Exchange (ETDEWEB)

Betinol, Roy G.; Altmann, Nara [Brass Chile S.A., Santiago (Chile)

2009-12-19

The pressure to get engineering projects done and constructed as fast as possible in order to take advantage of the high prices in metals and petrochemicals has been driving companies to skip the conceptual phase and go straight into basic engineering with cost estimates in the level of 15% accuracy. By-passing early engineering and demanding higher cost estimating accuracy is a contradiction. In most cases, savings made on capital investment is much higher had money been spent in conceptual studies which allow for the optimal solution to be found. This paper reviews one of the key aspects in conceptual engineering of slurry pipeline designs: route selection. This activity is often overlooked, causing capital cost and operating difficulties to rise unnecessarily. This paper describes and gives example on how an integrated client/engineering company's approach to route selection can produce significant savings in pipeline construction and operating costs. (author)

Effects of Behavioral Skills Training on Parental Treatment of Children's Food Selectivity

Science.gov (United States)

Seiverling, Laura; Williams, Keith; Sturmey, Peter; Hart, Sadie

2012-01-01

We used behavioral skills training to teach parents of 3 children with autism spectrum disorder and food selectivity to conduct a home-based treatment package that consisted of taste exposure, escape extinction, and fading. Parent performance following training improved during both taste sessions and probe meals and was reflected in increases in…

Bevacizumab in the treatment of NSCLC: patient selection and perspectives

Directory of Open Access Journals (Sweden)

Russo AE

2017-12-01

Full Text Available Alessia E Russo,1 Domenico Priolo,1 Giovanna Antonelli,1 Massimo Libra,2 James A McCubrey,3 Francesco Ferraù1 1Medical Oncology Department, San Vincenzo Hospital, Taormina (Messina, Italy; 2Laboratory of Translational Oncology & Functional Genomics, Department of Biomedical and Biotechnological Sciences, University of Catania, Catania, Italy; 3Department of Microbiology and Immunology, Brody School of Medicine at East Carolina University, Greenville, NC, USA Abstract: Non-small-cell lung cancer (NSCLC represents about 85% of all lung cancers, and more than half of NSCLCs are diagnosed at an advanced stage. Chemotherapy has reached a plateau in the overall survival curve of about 10 months. Therefore, in last decade novel targeted approaches have been developed to extend survival of these patients, including antiangiogenic treatment. Vascular endothelial growth factor (VEGF signaling pathway plays a dominant role in stimulating angiogenesis, which is the main process promoting tumor growth and metastasis. Bevacizumab (bev; Avastin® is a recombinant humanized monoclonal antibody that neutralizes VEGF’s biologic activity through a steric blocking of its binding with VEGF receptor. Currently, bev is the only antiangiogenic agent approved for the first-line treatment of advanced or recurrent nonsquamous NSCLC in “bev-eligible” patients. The ineligibility to receive bev is related to its toxicity. In the pivotal trials of bev in NSCLC, fatal bleeding events including pulmonary hemorrhage were observed with rates higher in the chemotherapy-plus-bev group. Therefore, in order to reduce the incidence of severe pulmonary hemorrhage, numerous exclusion criteria have been characteristically applied for bev such as central tumor localization or tumor cavitation, use of anticoagulant therapy, presence of brain metastases, age of patients (elderly. Subsequent studies designed to evaluate the safety of bev have demonstrated that this agent is safe and

Design-a-wetland: a tool for generating and assessing constructed wetland designs for wastewater treatment

International Nuclear Information System (INIS)

Casaril, Carolina J.

2007-01-01

Full text: Full text: The hydrological cycle is a key cycle affected by current and predicted climate change. Wetlands are one of the key ecosystems within the hydrological cycle and could contribute significantly in facing the challenges of climate change, such as water shortage. The impact of wetlands on greenhouse gas emissions is much debated and, conversely, the impact of climate change on wetlands also raises many questions. There have been many attempts to harness and integrate the natural capacities of wetlands into constructed systems. These systems are especially designed for multiple purposes. They can be used for wastewater treatment and reuse, and have the potential to increase sustainability by changing land and water use practices. This project generates a 'Design-A-Wetland' prototype model, designed to facilitate decision-making in the creation of constructed wetlands. Constructed wetlands are specifically tailored to their end use; water treatment fish and fowl habitat, flood buffer zones, or sequestration of greenhouse gases. This project attempts to answer the following questions: Can a single integrated decision model be created for the design and assessment of artificial wetlands, provided either entry or exit standards are known and specified?; Can the elements of a system of interfacing the model with public consultation be specified?; The project identifies model schematics and lays the groundwork for modelling suited to the wide variety of inputs required for decision making

Reducing constraints on quantum computer design by encoded selective recoupling

International Nuclear Information System (INIS)

Lidar, D.A.; Wu, L.-A.

2002-01-01

The requirement of performing both single-qubit and two-qubit operations in the implementation of universal quantum logic often leads to very demanding constraints on quantum computer design. We show here how to eliminate the need for single-qubit operations in a large subset of quantum computer proposals: those governed by isotropic and XXZ , XY -type anisotropic exchange interactions. Our method employs an encoding of one logical qubit into two physical qubits, while logic operations are performed using an analogue of the NMR selective recoupling method

Effect of different oral oxytetracycline treatment regimes on selection of antimicrobial resistant coliforms in nursery pigs

DEFF Research Database (Denmark)

Fresno, Ana Herrero; Zachariasen, Camilla; Norholm, Nanna

2017-01-01

A major concern derived from using antimicrobials in pig production is the development of resistance. This study aimed to assess the impact of selected combinations of oral dose and duration of treatment with oxytetracycline (OTC) on selection of tetracycline resistant (TET-R) coliforms recovered...

Handbook for the design, selection, and construction of a rock cover for retired uranium-mill tailings

International Nuclear Information System (INIS)

Parker, G.B.

1982-09-01

As part of a Nuclear Regulatory Commission (NRC) study to assess the long-term protection of retired uranium mill tailings, the Pacific Northwest Laboratory (PNL) is developing a Handbook to guide the design, selection, and construction of a rock cover (riprap) for decommissioned and reclaimed uranium-mill tailings. The rock cover is designed for long-term protection of mill tailings from wind and water erosion. The purpose of the Handbook is twofold. First, it can be used as a manual by the uranium mill operators for designing, selecting, and constructing a rock cover. Second, the Handbook can be used as a guide to help the NRC evaluate the decommissioning and reclamation plans submitted to them by mill operators. Although the Handbook is not site-specific, it is structured to allow the design of a rock cover for any NRC-licensed tailings impoundment

Rethinking non-inferiority: a practical trial design for optimising treatment duration.

Science.gov (United States)

Quartagno, Matteo; Walker, A Sarah; Carpenter, James R; Phillips, Patrick Pj; Parmar, Mahesh Kb

2018-06-01

Background Trials to identify the minimal effective treatment duration are needed in different therapeutic areas, including bacterial infections, tuberculosis and hepatitis C. However, standard non-inferiority designs have several limitations, including arbitrariness of non-inferiority margins, choice of research arms and very large sample sizes. Methods We recast the problem of finding an appropriate non-inferior treatment duration in terms of modelling the entire duration-response curve within a pre-specified range. We propose a multi-arm randomised trial design, allocating patients to different treatment durations. We use fractional polynomials and spline-based methods to flexibly model the duration-response curve. We call this a 'Durations design'. We compare different methods in terms of a scaled version of the area between true and estimated prediction curves. We evaluate sensitivity to key design parameters, including sample size, number and position of arms. Results A total sample size of ~ 500 patients divided into a moderate number of equidistant arms (5-7) is sufficient to estimate the duration-response curve within a 5% error margin in 95% of the simulations. Fractional polynomials provide similar or better results than spline-based methods in most scenarios. Conclusion Our proposed practical randomised trial 'Durations design' shows promising performance in the estimation of the duration-response curve; subject to a pending careful investigation of its inferential properties, it provides a potential alternative to standard non-inferiority designs, avoiding many of their limitations, and yet being fairly robust to different possible duration-response curves. The trial outcome is the whole duration-response curve, which may be used by clinicians and policymakers to make informed decisions, facilitating a move away from a forced binary hypothesis testing paradigm.

Selection, specification, design and use of various nuclear power plant training simulators

International Nuclear Information System (INIS)

Bruno, R.; Neboyan, V.

1997-01-01

Several IAEA guidance publications on safety culture and NPP personnel training consider the role of training and particularly the role of simulators training to enhance the safety of NPP operations. Initially, the focus has been on full-scope simulators for the training of main control room operators. Presently, a wide range of different types of simulators are used at training center. Several guidance publications concerning development and use of full-scope simulators are currently available. Experience shows that other types of simulators are also effective training tools that allow simulator training for a broader range of target groups and training objectives. Based on this need, the IAEA undertook a project to prepare a report on selection, specification, design and use of various training simulators, which provides guidance to training centers and suppliers for proper selection, specification, design, and use of various form of simulators. In addition, it provides examples of their use in several Member States. This paper presents a summary of the IAEATECDOC publication on the subject. (author)

Natalizumab treatment for multiple sclerosis: updated recommendations for patient selection and monitoring

DEFF Research Database (Denmark)

Kappos, Ludwig; Bates, David; Edan, Gilles

2011-01-01

Natalizumab, a highly specific α4-integrin antagonist, is approved for treatment of patients with active relapsing-remitting multiple sclerosis (RRMS). It is generally recommended for individuals who have not responded to a currently available first-line disease-modifying therapy or who have very......, based on additional long-term follow-up of clinical studies and post-marketing observations, including appropriate patient selection and management recommendations.......Natalizumab, a highly specific α4-integrin antagonist, is approved for treatment of patients with active relapsing-remitting multiple sclerosis (RRMS). It is generally recommended for individuals who have not responded to a currently available first-line disease-modifying therapy or who have very...... active disease. The expected benefits of natalizumab treatment have to be weighed against risks, especially the rare but serious adverse event of progressive multifocal leukoencephalopathy. In this Review, we revisit and update previous recommendations on natalizumab for treatment of patients with RRMS...

Structure-Based Design and Synthesis of Potent and Selective Matrix Metalloproteinase 13 Inhibitors.

Science.gov (United States)

Choi, Jun Yong; Fuerst, Rita; Knapinska, Anna M; Taylor, Alexander B; Smith, Lyndsay; Cao, Xiaohang; Hart, P John; Fields, Gregg B; Roush, William R

2017-07-13

We describe the use of comparative structural analysis and structure-guided molecular design to develop potent and selective inhibitors (10d and (S)-17b) of matrix metalloproteinase 13 (MMP-13). We applied a three-step process, starting with a comparative analysis of the X-ray crystallographic structure of compound 5 in complex with MMP-13 with published structures of known MMP-13·inhibitor complexes followed by molecular design and synthesis of potent but nonselective zinc-chelating MMP inhibitors (e.g., 10a and 10b). After demonstrating that the pharmacophores of the chelating inhibitors (S)-10a, (R)-10a, and 10b were binding within the MMP-13 active site, the Zn 2+ chelating unit was replaced with nonchelating polar residues that bridged over the Zn 2+ binding site and reached into a solvent accessible area. After two rounds of structural optimization, these design approaches led to small molecule MMP-13 inhibitors 10d and (S)-17b, which bind within the substrate-binding site of MMP-13 and surround the catalytically active Zn 2+ ion without chelating to the metal. These compounds exhibit at least 500-fold selectivity versus other MMPs.

Helminths in horses : use of selective treatment for the control of strongyles

Directory of Open Access Journals (Sweden)

S. Matthee

2004-06-01

Full Text Available The current level of anthelmintic resistance in the horse-breeding industry is extremely high and therefore more emphasis is being placed on studies that focus on the judicious use of anthelmintic products. The aims of the study were to: 1 establish if there is variation in the egg excretion pattern of strongyles between the different age classes of Thoroughbred horses in the Western Cape Province (WCP, 2 test if a selective treatment approach successfully reduces the number of anthelmintic treatments and maintains acceptably low helminth burdens in adult Thoroughbred horses, and 3 evaluate the efficacy of subsampling large horse herds for faecal egg counts (FECs to monitor the strongyle burden. In 2001 the FECs of 4 adult mare, 5 yearling and 3 weanling herds from 8 different farms were compared in the WCP. Within the mare herds there were generally fewer eggexcreting individuals with lower mean FECs compared with the younger age classes. Individual faecal samples were collected every 3-4 weeks from 52 adult Thoroughbred mares from 1 farm in the WCP during a 12-month period (2002/2003. Animals with strongyle FECs > 100 eggs per gram (epg were treated with an ivermectin-praziquantel combination drug (Equimax oral paste, Virbac. The mean monthly strongyle FEC for the entire group was < 300 epg throughout the study and the number of treatments was reduced by 50 %. Resampling methods showed that an asymptote to mean FEC was reached at 55 animals for each of the pooled weanling, yearling and mare egg counts. Resampling within 4 different mare herds recorded asymptotes of between 24 and 28 animals. Subsampling entire herds for FECs therefore provided an effective approach to treatment management. This study demonstrates that selective treatment is both a practical and an effective approach to the management of anthelmintic resistance.

A note on “An alternative multiple attribute decision making methodology for solving optimal facility layout design selection problems”

OpenAIRE

R. Venkata Rao

2012-01-01

A paper published by Maniya and Bhatt (2011) (An alternative multiple attribute decision making methodology for solving optimal facility layout design selection problems, Computers & Industrial Engineering, 61, 542-549) proposed an alternative multiple attribute decision making method named as “Preference Selection Index (PSI) method” for selection of an optimal facility layout design. The authors had claimed that the method was logical and more appropriate and the method gives directly the o...

Sectional removable partial denture design for the treatment of ...

African Journals Online (AJOL)

Sectional removable partial denture design for the treatment of partial mandibulectomy patient: a case report. ... mandibulectomy with no surgical reconstruction. The case was challenging and the prosthesis was well tolerated during a 6 months follow-up review. (Afr. J. Biomed. Res. 10: 197 - 201). Keywords: Removable ...

A Course on Operational Considerations in Wastewater Treatment Plant Design. Student Manual.

Science.gov (United States)

Stottler, Stag and Associates, San Antonio, TX.

This manual was designed to furnish information for upgrading the design of wastewater treatment plant facilities and to serve as a resource for establishing criteria for upgrading these plants. The manual also furnishes information for modifying plant design to compensate for current organic and hydraulic overloads and/or to meet more stringent…

Alternative designs for megavoltage machines for cancer treatment in developing countries

Energy Technology Data Exchange (ETDEWEB)

Borras, C [Pan American Health Organization, Washington, DC (United States); Svensson, H [International Atomic Energy Agency, Vienna (Austria); Hanson, G P [World Health Organization, Geneva (Switzerland)

1996-08-01

In developing countries radiation therapy is often performed with antiquated cobalt-60 units, the radioactive sources of which are long decayed and, thus, treatments are ineffective. Furthermore the cost involved in the disposal of spent radionuclide sources discourages owners from proper removal and storage, and accidents occur. Although present design of microwave electron linear accelerators provide excellent beam characteristics, developing countries in many locations do not have the infrastructure to maintain such machines. After an analysis of the radiotherapy situation world-wide - especially from the viewpoint of maintenance - a consensus was reached on the radiotherapy equipment performance requirements. To meet these requirements, several accelerator designs were considered. Among the most promising new designs were the klystron/linac and the high frequency linear accelerator, the microtron in a radiation head, the high frequency betatron, also in a radiation accelerator, and DC accelerators. Possible treatment designs, including those of modular nature, were presented. Since it is estimated that by the year 2015, barring a dramatic and unforeseen cure for cancer, a total of 10,000 machines will be needed to provide treatment for an estimated 10 million new cases per year in developing countries, the impact of such high technology simple machine could be substantial in providing equity and quality for the management of cancer patients. 4 refs, 2 tabs.

Alternative designs for megavoltage machines for cancer treatment in developing countries

International Nuclear Information System (INIS)

Borras, C.; Svensson, H.; Hanson, G.P.

1996-01-01

In developing countries radiation therapy is often performed with antiquated cobalt-60 units, the radioactive sources of which are long decayed and, thus, treatments are ineffective. Furthermore the cost involved in the disposal of spent radionuclide sources discourages owners from proper removal and storage, and accidents occur. Although present design of microwave electron linear accelerators provide excellent beam characteristics, developing countries in many locations do not have the infrastructure to maintain such machines. After an analysis of the radiotherapy situation world-wide - especially from the viewpoint of maintenance - a consensus was reached on the radiotherapy equipment performance requirements. To meet these requirements, several accelerator designs were considered. Among the most promising new designs were the klystron/linac and the high frequency linear accelerator, the microtron in a radiation head, the high frequency betatron, also in a radiation accelerator, and DC accelerators. Possible treatment designs, including those of modular nature, were presented. Since it is estimated that by the year 2015, barring a dramatic and unforeseen cure for cancer, a total of 10,000 machines will be needed to provide treatment for an estimated 10 million new cases per year in developing countries, the impact of such high technology simple machine could be substantial in providing equity and quality for the management of cancer patients. 4 refs, 2 tabs

CBT for childhood anxiety disorders: differential changes in selective attention between treatment responders and non-responders

NARCIS (Netherlands)

Legerstee, Jeroen S.; Tulen, Joke H. M.; Dierckx, Bram; Treffers, Philip D. A.; Verhulst, Frank C.; Utens, Elisabeth M. W. J.

2010-01-01

This study examined whether treatment response to stepped-care cognitive-behavioural treatment (CBT) is associated with changes in threat-related selective attention and its specific components in a large clinical sample of anxiety-disordered children. Ninety-one children with an anxiety disorder

Selected Physical Therapy Modalities for the treatment of Diabetic Polyneuropathy

International Nuclear Information System (INIS)

Sawan, S.; Sayed, N.; Al-Gazzar, S.

2006-01-01

The purpose of this study was to examine the effect of using selected physical therapy modalities for the treatment of diabetic polyneuropathy. Thirty patients participated in this study. Patients were randomly divided into study group (ten males and five females) and control group (six males and nine females). The study group received interferential current on the lumbosacral region, followed by repeated contraction as specific technique of proprioceptive neuromuscular facilitation (PNF) to the anterior tibial group muscles. The control group did not receive physical therapy treatment. The treatment for the study group was conducted three times per week, for a period of six weeks. The patients were assessed for intensity of pain, manual muscle testing of the anterior tibial group muscles, and the level of superficial sensation on their feet. Patients were assessed the beginning of the treatment session and after the last session. The result of this study showed a significant decrease in the pain intensity, increase anterior tibial group muscles strength and increase level of superficial sensation in patients of study group in comparison to the control group at the end of the treatment. The control group did not show significant changes. It can be concluded that the combination of interferential current and repeated contraction (specific technique of PNF to the anterior tibial group muscles) is effective in decreasing the pain, increasing anterior tibial group muscles strength and the level of superficial sensation in patients suffering from diabetic polyneuropathy. (author)

Select Components and Finish System Design of a Window Air Conditioner with Propane

Energy Technology Data Exchange (ETDEWEB)

Shen, Bo [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Abdelaziz, Omar [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-05-01

This report describes the technical targets for developing a high efficiency window air conditioner (WAC) using propane (R-290). The baseline unit selected for this activity is a GE R-410A WAC. We established collaboration with a Chinese rotary compressor manufacturer, to select an R-290 compressor. We first modelled and calibrated the WAC system model using R-410A. Next, we applied the calibrated system model to design the R-290 WAC, and decided the strategies to reduce the system charge below 260 grams and achieve the capacity and efficiency targets.

ED-WAVE tool design approach: Case of a textile wastewater treatment plant in Blantyre, Malawi

Science.gov (United States)

Chipofya, V.; Kraslawski, A.; Avramenko, Y.

The ED-WAVE tool is a PC based package for imparting training on wastewater treatment technologies. The system consists of four modules viz. Reference Library, Process Builder, Case Study Manager, and Treatment Adviser. The principles of case-based design and case-based reasoning as applied in the ED-WAVE tool are utilised in this paper to evaluate the design approach of the wastewater treatment plant at Mapeto David Whitehead & Sons (MDW&S) textile and garments factory, Blantyre, Malawi. The case being compared with MDW&S in the ED-WAVE tool is Textile Case 4 in Sri Lanka (2003). Equalisation, coagulation and rotating biological contactors is the sequencing of treatment units at Textile Case 4 in Sri Lanka. Screening, oxidation ditches and sedimentation is the sequencing of treatment units at MDW&S textile and garments factory. The study suggests that aerobic biological treatment is necessary in the treatment of wastewater from a textile and garments factory. MDW&S incorporates a sedimentation process which is necessary for the removal of settleable matter before the effluent is discharged to the municipal wastewater treatment plant. The study confirmed the practical use of the ED-WAVE tool in the design of wastewater treatment systems, where after encountering a new situation; already collected decision scenarios (cases) are invoked and modified in order to arrive at a particular design alternative. What is necessary, however, is to appropriately modify the case arrived at through the Case Study Manager in order to come up with a design appropriate to the local situation taking into account technical, socio-economic and environmental aspects.

Advances in HTGR Wastewater Treatment System Design

International Nuclear Information System (INIS)

Li Junfeng; Qiu Yu; Wang Jianlong; Jia Fei

2014-01-01

The source terms of radioactive wastewater from HTR-PM were introduced. Concentration process should be used to reduce volume. A radioactive wastewater treatment system was designed by using Disc tubular reverse osmosis (DTRO) membrane system. The pretreatment system was simplify by using a cartridge filter. A three-stage membrane system was built. The operated characters to treat low and intermediate radioactive waste water were studied. A concentration rates of 25-50 is reached. The decontamination factor of the membrane system can reach 30-100. (author)

Selection of a turbine cooling system applying multi-disciplinary design considerations.

Science.gov (United States)

Glezer, B

2001-05-01

The presented paper describes a multi-disciplinary cooling selection approach applied to major gas turbine engine hot section components, including turbine nozzles, blades, discs, combustors and support structures, which maintain blade tip clearances. The paper demonstrates benefits of close interaction between participating disciplines starting from early phases of the hot section development. The approach targets advancements in engine performance and cost by optimizing the design process, often requiring compromises within individual disciplines.

Mooring Design Selection of Aquaculture Cage for Indonesian Ocean

Science.gov (United States)

Mulyadi, Y.; Syahroni, N.; Sambodho, K.; Zikra, M.; Wahyudi; Adia, H. B. P.

2018-03-01

Fish production is important for the economy in fishing community and for ensuring food security. Climate change will lead a threat to fish productivity. Therefore, a solution offered is to cultivate certain fish, especially those with high economic value by using offshore aquaculture technology. A Sea Station cage is one of the offshore aquaculture cage model that has been used in some locations. As a floating structure, the Sea Station cage need a mooring system to maintain its position. This paper presents the selection analysis of the mooring system designs of the Sea Station cage model that it is suitable with Indonesia Ocean. There are 3 mooring configurations that are linear array, rectangular array, and 4 points mooring type. The nylon mooring rope type has been selected to be used on the 3 mooring configurations and the rope has a diameter of 104 mm with a breaking force of 2.3 MN. Based on results from comparing the 3 mooring configurations, the best mooring configuration is linear array with the tension on the rope of 217 KN and has the safety factor of 0.2 based on DNVGL OS-E301

Design aspects of reverse osmosis plants for rad waste treatment

International Nuclear Information System (INIS)

Prabhakar, S.; Panicker, S.T.; Misra, B.M.

1993-01-01

The potential of reverse osmosis process has been well established in the nuclear waste treatment. The nuclear wastes are characterised by chemically insignificant levels of radioactive nuclides and small amounts (a few hundred ppm) of inactive ionic species. The basic design objectives in these systems aim at higher volume reduction factors, i.e. corresponding to recovery factor of more than 0.9 and a decontamination factor of at least 10, i.e. corresponding to a solute rejection of more than 90%. In this paper, the salient aspects of the design of a reverse osmosis system for radioactive waste treatment is discussed in the light of the operating experience of an experimental plant based on plate module configuration and utilizing cellulose acetate membranes prepared in our laboratory. (author). 3 refs., 5 figs., 2 tabs

RIP Input Tables From WAPDEG for LA Design Selection: Continuous Post-Closure Ventilation Design- Open Loop

International Nuclear Information System (INIS)

K.G. Mon; P.K. Mast; R. Howard; J.H. Lee

1999-01-01

The purpose of this calculation is to document (1) the Waste Package Degradation (WAPDEG) version 3.09 (CRWMS M and O 1998b). Software Routine Report for WAPDEG (Version 3.09) simulations used to analyze waste package degradation and failure under the repository exposure conditions characterized by the open loop option of the post-closure ventilation design and, (2) post-processing of these results into tables of waste package degradation time histories suitable for use as input into the Integrated Probabilistic Simulator for Environmental Systems version 5.19.0 1 (RIP) computer program (Golder Associates 1998). Specifically, the WAPDEG simulations discussed in this calculation correspond to waste package emplacement conditions (repository environment and design) defined in the Total System Performance Assessment-Viability Assessment (TSPA-VA), with the exception that the open loop option of the post-closure ventilation License Application Design Selection (LADS) Design Alternative (Design Alternative 3b) was analyzed. The open loop post-closure ventilation design alternative, under which airways to the surface remain open after repository closure, could result in substantial cooling and drying of the potential repository. In open loop post-closure ventilation, expanded air heated by waste decay would move up an exhaust shaft, pulling denser, cooler air into the repository through intake shafts. The exchange of air with the atmosphere could remove more heat and moisture. As a result of the enhanced ventilation relative to the TSPA-VA base-case design, different temperature and relative humidity time histories at the waste package surface are calculated (input to the WAPDEG simulations), and consequently different waste package failure histories (as calculated by WAPDEG) result

Selection of the optimum magnet design for the International Linear Collider positron source helical undulator

Directory of Open Access Journals (Sweden)

D. J. Scott

2007-03-01

Full Text Available A comparison of possible undulator designs for the International Linear Collider positron source has resulted in a superconducting bifilar wire design being selected. After a comprehensive paper study and fabrication of the two preeminent designs, the superconducting undulator was chosen instead of the permanent magnet alternative. This was because of its superior performance in terms of magnetic field strength and quality, operational flexibility, risk of radiation damage, ease in achieving the required vacuum, and cost. The superconducting undulator design will now be developed into a complete system design for the full 200 m long magnet that is required.

Residue-based Coordinated Selection and Parameter Design of Multiple Power System Stabilizers (PSSs)

DEFF Research Database (Denmark)

Su, Chi; Hu, Weihao; Fang, Jiakun

2013-01-01

data from time domain simulations. Then a coordinated approach for multiple PSS selection and parameter design based on residue method is proposed and realized in MATLAB m-files. Particle swarm optimization (PSO) is adopted in the coordination process. The IEEE 39-bus New England system model...

Analysis of Economical and Environmental Costs for the Selection of Municipal Solid Waste Treatment and Disposal Scenarios through Multicriteria Analysis (ELECTRE Method

Directory of Open Access Journals (Sweden)

Lorena De Medina-Salas

2017-10-01

Full Text Available Decision-making for the selection of treatment alternatives and landfilling of municipal solid waste (MSW is based on the experience and judgment of those management responsible, without considering multicriteria analysis. Therefore, the purpose of this research was to determine the treatment scenario and landfilling of MSW with the lowest environmental and economic costs in a medium-sized city. The methodology included the definition and data processing of the project (population, generation, and composition of MSW, for 16 years. In the design of scenarios, recycling, composting, incineration with energy recovery, and landfilling treatments were proposed; later, the combinations of treatments for each type of residue were generated. The results showed 36 scenarios, then the ELECTRE method was applied to the five with the lowest economical and environmental costs. Finally from the latter, one dominant scenario was determined: organic waste in composting; plastic, paper, and glass in recycling; and ‘others’ in landfilling. It is concluded that the final decision on the scenario is adapted to the particular conditions of the locality.

Increasing spelling achievement: an analysis of treatment procedures utilizing an alternating treatments design.

OpenAIRE

Ollendick, T H; Matson, J L; Esveldt-Dawson, K; Shapiro, E S

1980-01-01

Two studies which examine the effectiveness of spelling remediation procedures are reported. In both studies, an alternating treatment design was employed. In the first study, positive practice overcorrection plus positive reinforcement was compared to positive practice alone and a no-remediation control condition. In the second study, positive practice plus positive reinforcement was compared to a traditional corrective procedure plus positive reinforcement and a traditional procedure when u...

[Newly Designed Water Treatment Systems for Hospital Effluent].

Science.gov (United States)

Azuma, Takashi

2018-01-01

　Pharmaceuticals are indispensable to contemporary life. Recently, the emerging problem of pharmaceutical-based pollution of river environments, including drinking water sources and lakes, has begun to receive significant attention worldwide. Because pharmaceuticals are designed to perform specific physiological functions in targeted regions of the human body, there is increasing concern regarding their toxic effects, even at low concentrations, on aquatic ecosystems and human health, via residues in drinking water. Pharmaceuticals are consistently employed in hospitals to treat disease; and Japan, one of the most advanced countries in medical treatment, ranks second worldwide in the quantity of pharmaceuticals employed. Therefore, the development of technologies that minimize or lessen the related environmental risks for clinical effluent is an important task as well as that for sewage treatment plants (STPs). However, there has been limited research on clinical effluent, and much remains to be elucidated. In light of this, we are investigating the occurrence of pharmaceuticals, and the development of water treatment systems for clinical effluent. This review discusses the current research on clinical effluent and the development of advanced water treatment systems targeted at hospital effluent, and explores strategies for future environmental risk assessment and risk management.

Radiation shielding design of BNCT treatment room for D-T neutron source.

Science.gov (United States)

Pouryavi, Mehdi; Farhad Masoudi, S; Rahmani, Faezeh

2015-05-01

Recent studies have shown that D-T neutron generator can be used as a proper neutron source for Boron Neutron Capture Therapy (BNCT) of deep-seated brain tumors. In this paper, radiation shielding calculations have been conducted based on the computational method for designing a BNCT treatment room for a recent proposed D-T neutron source. By using the MCNP-4C code, the geometry of the treatment room has been designed and optimized in such a way that the equivalent dose rate out of the treatment room to be less than 0.5μSv/h for uncontrolled areas. The treatment room contains walls, monitoring window, maze and entrance door. According to the radiation protection viewpoint, dose rate results of out of the proposed room showed that using D-T neutron source for BNCT is safe. Copyright © 2015 Elsevier Ltd. All rights reserved.

Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology.

Science.gov (United States)

Chen, Jianyu; Zhang, Zhiguang; Chen, Xianshuai; Zhang, Chunyu; Zhang, Gong; Xu, Zhewu

2014-11-01

Recently a new therapeutic concept of patient-specific implant dentistry has been advanced based on computer-aided design/computer-aided manufacturing technology. However, a comprehensive study of the design and 3-dimensional (3D) printing of the customized implants, their mechanical properties, and their biomechanical behavior is lacking. The purpose of this study was to evaluate the mechanical and biomechanical performance of a novel custom-made dental implant fabricated by the selective laser melting technique with simulation and in vitro experimental studies. Two types of customized implants were designed by using reverse engineering: a root-analog implant and a root-analog threaded implant. The titanium implants were printed layer by layer with the selective laser melting technique. The relative density, surface roughness, tensile properties, bend strength, and dimensional accuracy of the specimens were evaluated. Nonlinear and linear finite element analysis and experimental studies were used to investigate the stress distribution, micromotion, and primary stability of the implants. Selective laser melting 3D printing technology was able to reproduce the customized implant designs and produce high density and strength and adequate dimensional accuracy. Better stress distribution and lower maximum micromotions were observed for the root-analog threaded implant model than for the root-analog implant model. In the experimental tests, the implant stability quotient and pull-out strength of the 2 types of implants indicated that better primary stability can be obtained with a root-analog threaded implant design. Selective laser melting proved to be an efficient means of printing fully dense customized implants with high strength and sufficient dimensional accuracy. Adding the threaded characteristic to the customized root-analog threaded implant design maintained the approximate geometry of the natural root and exhibited better stress distribution and

A non-selective (amitriptyline), but not a selective (citalopram), serotonin reuptake inhibitor is effective in the prophylactic treatment of chronic tension-type headache.

OpenAIRE

Bendtsen, L; Jensen, R; Olesen, J

1996-01-01

OBJECTIVES: Although the tricyclic antidepressant amitriptyline is extensively used in the prophylactic treatment of chronic tension-type headache, only few studies have investigated the efficacy of this treatment and the results are contradictory. In addition, the new selective serotonin reuptake inhibiting antidepressants, which are widely used in depression and of potential value in pain management, have never been investigated in a placebo controlled study of tension-type headache. The ai...

Alternatives for OSAHS treatment: selection of patients for upper airway surgery and oral appliances

Directory of Open Access Journals (Sweden)

A. Boudewyns

2007-12-01

Full Text Available Although continuous positive airway pressure (CPAP is considered to represent the standard treatment for patients with moderate-to-severe obstructive sleep apnoea/hypopnoea syndrome (OSAHS, poor treatment compliance and/or refusal is an issue in 20–30% of these patients. As an alternative to life-long CPAP treatment, conservative procedures exist with dental appliances for mandibular advancement, as well as curative surgical techniques. Surgical treatment of OSAHS can be divided into the following two main groups: 1 upper airway surgery by soft tissue resection (uvulopalatopharyngoplasty, etc., and 2 skeletal procedures, such as maxillo-mandibular advancement. Proper selection of patients for the different treatment modalities is the key for full treatment success. Patient-related factors, such as the site of upper airway collapse, craniofacial characteristics, dental health, obesity, age, profession and positional dependence, as well as treatment-related factors, should be evaluated before a final proposal for these treatment alternatives is formulated.

Formal Design and Analysis of a Wastewater Treatment Control System based on Petrinet

Directory of Open Access Journals (Sweden)

Seno D. Panjaitan

2012-04-01

Full Text Available This paper proposes a new control design approach for industrial wastewater treatment where its logic control is verifiable. In this research, a treatment control design in a lab-scale was controlled by a microcontroller circuit. The developed system combined anaerobic digestion, aeration and filtration process. Its logic control algorithm was designed by using Signal Interpreted Petri Net. In the logic verification, six analysis properties were satisfied: conflict free (logical process had no conflict behavior, termination (the process could be terminated from any state, non-contradictory outputs, live (any process state could always be reached from other state, deadlock-free, and reversible (the process could always back to initial condition. In the design evaluation, the average value of transparency metrics was 0.984 close to 1 as the best value. The system performance was evaluated by pollutant removal efficiency. The highest removal efficiencies were obtained when each anaerobic and aeration treatment were performed for three days respectively and followed by filtration. Within this condition, the system obtained average removal efficiency 91.7% of Chemical Oxygen Demand and 95.4% of Total Suspended Solids. In terms of electricity consumption, the system needed only 1,857.6 Watt-hour for a batch treatment process.

Optimization Techniques for Design Problems in Selected Areas in WSNs: A Tutorial.

Science.gov (United States)

Ibrahim, Ahmed; Alfa, Attahiru

2017-08-01

This paper is intended to serve as an overview of, and mostly a tutorial to illustrate, the optimization techniques used in several different key design aspects that have been considered in the literature of wireless sensor networks (WSNs). It targets the researchers who are new to the mathematical optimization tool, and wish to apply it to WSN design problems. We hence divide the paper into two main parts. One part is dedicated to introduce optimization theory and an overview on some of its techniques that could be helpful in design problem in WSNs. In the second part, we present a number of design aspects that we came across in the WSN literature in which mathematical optimization methods have been used in the design. For each design aspect, a key paper is selected, and for each we explain the formulation techniques and the solution methods implemented. We also provide in-depth analyses and assessments of the problem formulations, the corresponding solution techniques and experimental procedures in some of these papers. The analyses and assessments, which are provided in the form of comments, are meant to reflect the points that we believe should be taken into account when using optimization as a tool for design purposes.

Materials design considerations and selection for a large rad waste incinerator

International Nuclear Information System (INIS)

Vormelker, P.R.; Jenkins, C.F.; Burns, H.H.

1997-01-01

A new incinerator has been built to process self-generated, low level radioactive wastes at the Department of Energy's Savannah River Site. Wastes include protective clothing and other solid materials used during the handling of radioactive materials, and liquid chemical wastes resulting from chemical and waste management operations. The basic design and materials of construction selected to solve the anticipated corrosion problems from hot acidic gases are reviewed. Problems surfacing during trial runs prior to radioactive operations are discussed

CBT for Childhood Anxiety Disorders: Differential Changes in Selective Attention between Treatment Responders and Non-Responders

Science.gov (United States)

Legerstee, Jeroen S.; Tulen, Joke H. M.; Dierckx, Bram; Treffers, Philip D. A.; Verhulst, Frank C.; Utens, Elisabeth M. W. J.

2010-01-01

Background: This study examined whether treatment response to stepped-care cognitive-behavioural treatment (CBT) is associated with changes in threat-related selective attention and its specific components in a large clinical sample of anxiety-disordered children. Methods: Ninety-one children with an anxiety disorder were included in the present…

Design optimization and analysis of selected thermal devices using self-adaptive Jaya algorithm

International Nuclear Information System (INIS)

Rao, R.V.; More, K.C.

2017-01-01

Highlights: • Self-adaptive Jaya algorithm is proposed for optimal design of thermal devices. • Optimization of heat pipe, cooling tower, heat sink and thermo-acoustic prime mover is presented. • Results of the proposed algorithm are better than the other optimization techniques. • The proposed algorithm may be conveniently used for the optimization of other devices. - Abstract: The present study explores the use of an improved Jaya algorithm called self-adaptive Jaya algorithm for optimal design of selected thermal devices viz; heat pipe, cooling tower, honeycomb heat sink and thermo-acoustic prime mover. Four different optimization case studies of the selected thermal devices are presented. The researchers had attempted the same design problems in the past using niched pareto genetic algorithm (NPGA), response surface method (RSM), leap-frog optimization program with constraints (LFOPC) algorithm, teaching-learning based optimization (TLBO) algorithm, grenade explosion method (GEM) and multi-objective genetic algorithm (MOGA). The results achieved by using self-adaptive Jaya algorithm are compared with those achieved by using the NPGA, RSM, LFOPC, TLBO, GEM and MOGA algorithms. The self-adaptive Jaya algorithm is proved superior as compared to the other optimization methods in terms of the results, computational effort and function evalutions.

An Assessment Protocol for Selective Mutism: Analogue Assessment Using Parents as Facilitators.

Science.gov (United States)

Schill, Melissa T.; And Others

1996-01-01

Assesses protocol for conducting a functional analysis of maintaining variables for children with selective mutism. A parent was trained in and later applied various behavior strategies designed to increase speech in an eight-year-old girl with selective mutism. Parent and child ratings of treatment were positive. Presents implications for future…

Within-host selection of drug resistance in a mouse model of repeated interrupted treatment of Plasmodium yoelii infection

OpenAIRE

Nuralitha, Suci; Siregar, Josephine E; Syafruddin, Din; Hoepelman, Andy I M; Marzuki, Sangkot

2017-01-01

BACKGROUND: To study within-host selection of resistant parasites, an important factor in the development of resistance to anti-malarial drugs, a mouse model of repeated interrupted malaria treatment (RIT) has been developed. The characteristics of within host selection of resistance to atovaquone and pyrimethamine in Plasmodium yoelii was examined in such a model. METHODS: Treatment of P. yoelii infected mice, with atovaquone or pyrimethamine, was started at parasitaemia level of 3-5%, inter...

Comparison of Body, Auricular, and Abdominal Acupuncture Treatments for Insomnia Differentiated as Internal Harassment of Phlegm-Heat Syndrome: An Orthogonal Design

Directory of Open Access Journals (Sweden)

Yue Jiao

2015-01-01

Full Text Available Objective. To identify the optimum treatment protocol for insomnia among auricular, body, and abdominal needling methods. Methods. A three-factor (3 needling protocols and three-level experimental scheme was designed based on orthogonal method. 54 patients of insomnia differentiated as internal harassment of phlegm-heat syndrome were given two courses of acupuncture treatment (each with 20 times of acupuncture. The therapeutic effects were evaluated by comparing the Pittsburgh sleep quality index (PSQI, Hamilton Depression Scale (HAMD scores, and Hamilton Anxiety Scale (HAMA scores of patients before treatment, after one course of treatment, and after two courses of treatment as well as one month after treatment. Results. Body, auricular, and abdominal acupuncture treatments all alleviated symptoms of insomnia, depression, and anxiety, but body and auricular acupuncture had stronger therapeutic effects. Conclusions. Body acupuncture at basic points shall be given priority in protocol selection for insomnia. The second-best choice is auricular acupuncture with basic points combined with points based on Traditional Chinese Medicine (TCM theories. Abdominal needling with very quick effect can be an alternative protocol with basic points combined with syndrome differentiation points.

Selective peripheral nerve resection for treatment of persistent pain around the knee joint after total knee arthroplasty.

Science.gov (United States)

Zhong, Guangjun; Liang, Zhu; Kan, Jiang; Muheremu, Aikeremujiang

2018-01-01

Objective This study was performed to determine the efficacy of selective peripheral nerve resection for treatment of persistent neuropathic pain after total knee arthroplasty (TKA). Methods Patients who underwent TKA in our department from January 2013 to July 2016 and experienced persistent pain around the knee joint after TKA were retrospectively included in the current study. Sixty patients were divided into experimental and control groups according the treatment they received. The treatment effect was evaluated by the Hospital for Special Surgery (HSS) knee score and visual analog scale (VAS) pain score preoperatively and at 1, 2, 3, 6, and 12 months postoperatively. Results The HSS knee scores were higher in both groups after than before the treatment, and HSS knee scores were significantly higher in the experimental group than in the control group. The VAS pain scores were lower in both groups after than before the treatment, and VAS pain scores were significantly lower in the experimental group than in the control group. Conclusions Selective peripheral nerve resection is an effective treatment method for persistent neuropathic pain after TKA.

Impact of treatment and re-treatment with artemether-lumefantrine and artesunate-amodiaquine on selection of Plasmodium falciparum multidrug resistance gene-1 polymorphisms in the Democratic Republic of Congo and Uganda.

Directory of Open Access Journals (Sweden)

Vito Baraka

Full Text Available The emergence of resistance against artemisinin combination treatment is a major concern for malaria control. ACTs are recommended as the rescue treatment, however, there is limited evidence as to whether treatment and re-treatment with ACTs select for drug-resistant P. falciparum parasites. Thus, the purpose of the present study is to investigate the impact of (re-treatment using artesunate-amodiaquine (ASAQ and artemether-lumefantrine (AL on the selection of P. falciparum multidrug resistance-1 (Pfmdr1 alleles in clinical settings.P. falciparum positive samples were collected from children aged 12-59 months in a clinical trial in DR Congo and Uganda. Pfmdr1 single nucleotide polymorphisms (SNPs analysis at codons N86Y, Y184F, and D1246Y were performed at baseline and post-treatment with either AL or ASAQ as a rescue treatment using nested PCR followed by restriction fragment length polymorphism (RFLP assays.The pre-treatment prevalence of Pfmdr1 N86 and D1246Y varied significantly between the sites, (p>0.001 and (p = 0.013, respectively. There was borderline significant directional selection for Pfmdr1 184F in recurrent malaria infections after treatment with AL in Uganda site (p = 0.05. Pfmdr1 NFD haplotype did not significantly change in post-treatment infections after re-treatment with either AL or ASAQ. Comparison between pre-treatment and post-treatment recurrences did not indicate directional selection of Pfmdr1 N86, D1246 alleles in the pre-RCT, RCT and post-RCT phases in both AL and ASAQ treatment arms. Pfmdr1 86Y was significantly associated with reduced risk of AL treatment failure (RR = 0.34, 95% CI:0.11-1.05, p = 0.04 while no evidence for D1246 allele (RR = 1.02; 95% CI: 0.42-2.47, p = 1.0. Survival estimates showed that the Pfmdr1 alleles had comparable mean-time to PCR-corrected recrudescence and new infections in both AL and ASAQ treatment arms.We found limited impact of (re-treatment with AL or ASAQ on selection for Pfmdr1

The optimum support design selection by using AHP method for the main haulage road in WLC Tuncbilek colliery

Energy Technology Data Exchange (ETDEWEB)

Yavuz, M.; Iphar, M.; Once, G.

2008-03-15

The engineers can frequently encounter with the situation to select the optimum option among the alternatives related with mining operations. The optimum choice can be selected by the experienced engineers taking into consideration their judgement and intuition. However, decision-making methods can offer to the engineers to support their optimum selection for a particular application in the scientific way. The Analytical Hierarchy Process (AHP) is one of the multi attribute decision-making (MADM) methods utilizing structured pair-wise comparisons. This paper presents an application of the AHP method to the selection of the optimum support design for the main transport road, which has been planned for deep coal seam panels of Western Lignite Corporation (WLC) Tuncbilek in Turkeiy. The methodology considers eight main objectives, namely: four different displacement values for determined history locations, factor of safety (FOS), cost, labour and applicability factor for the selection of support design. The displacements and stress values were obtained by using the finite difference program FLAC(3D) as the numerical studies have been widely used by the engineers examining the response of any opening in underground, in advance. After carrying out several numerical models for different support design, the AHP method was incorporated to evaluate these support designs according to the pre-determined criteria. The result of this study shows that such AHP application can assist the engineers to effectively evaluate the support system alternatives for an underground mine.

Improving observational study estimates of treatment effects using joint modeling of selection effects and outcomes: the case of AAA repair.

Science.gov (United States)

O'Malley, A James; Cotterill, Philip; Schermerhorn, Marc L; Landon, Bruce E

2011-12-01

When 2 treatment approaches are available, there are likely to be unmeasured confounders that influence choice of procedure, which complicates estimation of the causal effect of treatment on outcomes using observational data. To estimate the effect of endovascular (endo) versus open surgical (open) repair, including possible modification by institutional volume, on survival after treatment for abdominal aortic aneurysm, accounting for observed and unobserved confounding variables. Observational study of data from the Medicare program using a joint model of treatment selection and survival given treatment to estimate the effects of type of surgery and institutional volume on survival. We studied 61,414 eligible repairs of intact abdominal aortic aneurysms during 2001 to 2004. The outcome, perioperative death, is defined as in-hospital death or death within 30 days of operation. The key predictors are use of endo, transformed endo and open volume, and endo-volume interactions. There is strong evidence of nonrandom selection of treatment with potential confounding variables including institutional volume and procedure date, variables not typically adjusted for in clinical trials. The best fitting model included heterogeneous transformations of endo volume for endo cases and open volume for open cases as predictors. Consistent with our hypothesis, accounting for unmeasured selection reduced the mortality benefit of endo. The effect of endo versus open surgery varies nonlinearly with endo and open volume. Accounting for institutional experience and unmeasured selection enables better decision-making by physicians making treatment referrals, investigators evaluating treatments, and policy makers.

SLUDGE TREATMENT PROJECT KOP CONCEPTUAL DESIGN CONTROL DECISION REPORT

International Nuclear Information System (INIS)

Carro, C.A.

2010-01-01

This control decision addresses the Knock-Out Pot (KOP) Disposition KOP Processing System (KPS) conceptual design. The KPS functions to (1) retrieve KOP material from canisters, (2) remove particles less than 600 (micro)m in size and low density materials from the KOP material, (3) load the KOP material into Multi-Canister Overpack (MCO) baskets, and (4) stage the MCO baskets for subsequent loading into MCOs. Hazard and accident analyses of the KPS conceptual design have been performed to incorporate safety into the design process. The hazard analysis is documented in PRC-STP-00098, Knock-Out Pot Disposition Project Conceptual Design Hazard Analysis. The accident analysis is documented in PRC-STP-CN-N-00167, Knock-Out Pot Disposition Sub-Project Canister Over Lift Accident Analysis. Based on the results of these analyses, and analyses performed in support of MCO transportation and MCO processing and storage activities at the Cold Vacuum Drying Facility (CVDF) and Canister Storage Building (CSB), control decision meetings were held to determine the controls required to protect onsite and offsite receptors and facility workers. At the conceptual design stage, these controls are primarily defined by their safety functions. Safety significant structures, systems, and components (SSCs) that could provide the identified safety functions have been selected for the conceptual design. It is anticipated that some safety SSCs identified herein will be reclassified based on hazard and accident analyses performed in support of preliminary and detailed design.

Design and Development of Selective Extractants for Ln/An Separations

International Nuclear Information System (INIS)

Paine, Robert T.

2009-01-01

This study has succeeded in further developing phosphinoylmethyl pyridine compounds as selective recognition and separations agents for trivalent lanthanide and actinide ions present in nuclear materials. The parameters for efficient separations have been further elucidated and factors important to further development have been identified. Further development will lead to optimal extractant design for effective actinide ion partitioning under process practical conditions. The primary objective of the project involved the design, synthesis, and characterization of the extraction performance of 2,6-bis(phosphinomethyl)pyridine N,P,P'-trioxides (NOPOPO) as potential reagents for the separation of Am, Cm, and fission product lanthanides from other transuranics and fission products and for acting as a separations 'platform' for the mutual separation of Am/Cm from the lanthanides. The secondary but critical objective of the project focused on the characterization of aqueous acid and radiation stability of NOPOPO ligands. Further, the project served as a interdisciplinary training vehicle for new, young investigators in actinide separations chemistry.

Bioimpedance in monitoring of effects of selective serotonin reuptake inhibitor treatment

Directory of Open Access Journals (Sweden)

Kuznecova LV

2011-06-01

Full Text Available Vasiliy Grigorievich Alexeev, Ludmila Vasilievna KuznecovaDepartment of Physiology, SP Botkin Moscow City Clinical Hospital, Moscow, RussiaBackground: Bioimpedance has been shown to be a safe technique when used in a number of biomedical applications. In this study, we used the Electro Interstitial Scan (EIS to perform bioimpedance measurements to follow up the efficacy of selective serotonin reuptake inhibitor (SSRI treatment in subjects diagnosed to have major depressive disorder.Methods: We recruited 59 subjects (38 women, 21 men aged 17–76 (mean 47 years diagnosed with major depressive disorder by psychiatric assessment at the Botkin Hospital according to the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition (DSM-IV. Baseline Clinical Global Impression scores and EIS (electrical conductivity and dispersion α parameter measurements were done before starting SSRI therapy. Treatment follow-up was undertaken using EIS bioimpedance measurements and by treatment response based on the Hamilton Depression Scale and Clinical Global Impression, every 15 days for 60 days. At day 45, we classified the patients into two groups, ie, Group 1, including treatment responders, and Group 2, including nonresponders. At day 60, patients were classified into two further groups, ie, Group 3, comprising treatment responders, and Group 4, comprising nonresponders.Results: Comparing Group 1 and Group 2, electrical conductivity measurement of the pathway between the two forehead electrodes had a specificity of 72% and a sensitivity of 85.3% (P < 0.0001, with a cutoff >4.32. Comparing Group 3 and Group 4, electrical conductivity measurements in the same pathway had a specificity of 47.6% and a sensitivity of 76.3% (P < 0.16, with a cutoff >5.92. Comparing Group 1 and Group 2, the electrical dispersion α parameter of the pathway between the two disposable forehead electrodes had a specificity of 80% and a sensitivity of 85.2% (P < 0.0001 with a

A Selective Mutism Arising from First Language Attrition, Successfully Treated with Paroxetine-CBT Combination Treatment.

Science.gov (United States)

Serra, Agostino; Di Mauro, Paola; Andaloro, Claudio; Maiolino, Luigi; Pavone, Piero; Cocuzza, Salvatore

2015-10-01

After immersion in a foreign language, speakers often have difficulty retrieving native-language words and may experience a decrease in its proficiency, this phenomenon, in the non-pathological form, is known as first language attrition. Self-perception of this low native-language proficiency and apprehension occurring when speaking is expected and, may sometimes lead these people to a state of social anxiety and, in extreme forms, can involve the withholding of speech as a primitive tool for self-protection, linking them to selective mutism. We report an unusual case of selective mutism arising from first language attrition in an Italian girl after attending a two-year "German language school", who successfully responded to a paroxetine-cognitive behavioral treatment (CBT) combination treatment.

A novel design for randomized immuno-oncology clinical trials with potentially delayed treatment effects

Directory of Open Access Journals (Sweden)

Pei He

2015-10-01

Full Text Available The semi-parametric proportional hazards model is widely adopted in randomized clinical trials with time-to-event outcomes, and the log-rank test is frequently used to detect a potential treatment effect. Immuno-oncology therapies pose unique challenges to the design of a trial as the treatment effect may be delayed, which violates the proportional hazards assumption, and the log-rank test has been shown to markedly lose power under the non-proportional hazards setting. A novel design and analysis approach for immuno-oncology trials is proposed through a piecewise treatment effect function, which is capable of detecting a potentially delayed treatment effect. The number of events required for the trial will be determined to ensure sufficient power for both the overall log-rank test without a delayed effect and the test beyond the delayed period when such a delay exists. The existence of a treatment delay is determined by a likelihood ratio test with resampling. Numerical results show that the proposed design adequately controls the Type I error rate, has a minimal loss in power under the proportional hazards setting and is markedly more powerful than the log-rank test with a delayed treatment effect.

A Comparison Study of the Removal of Selected Pharmaceuticals in Waters by Chemical Oxidation Treatments

OpenAIRE

F. Javier Benitez; Juan Luis Acero; Francisco J. Real; Gloria Roldan; Francisco Casas

2011-01-01

The degradation of selected pharmaceuticals in some water matrices was studied by using several chemical treatments. The pharmaceuticals selected were the beta-blocker metoprolol, the nonsteroidal anti-inflammatory naproxen, the antibiotic amoxicillin, and the analgesic phenacetin; and their degradations were conducted by using UV radiation alone, ozone, Fenton-s reagent, Fenton-like system, photo-Fenton system, and combinations of UV radiation and ozone with H2O2, TiO2, ...

Agile Contracts: Designing an Agile Team Selection Guideline

DEFF Research Database (Denmark)

Pries-Heje, Lene; Pries-Heje, Jan

2014-01-01

with “endless” re-negotiation of the requirements; you need a more flexible way to develop IS. A new way of coping with many changes is to use an agile development approach and a fixed budget and resources contract. This paper presents an example case. We analyse the case and design a guideline for how......When you have stable and non-ambiguous requirements then a classic contract for IS between a supplier and a public sector institution based on a requirements specification may be well suited. However, if you have to accept many changes or have ambiguous requirements then you may end up...... to implement a fixed budget and resources contract in the public sector. The guideline includes elements to cope with challenges in a tender process such as transparency, criteria for supplier selection, and live assessment of resource skills and capabilities, as well as achieving the flexibility for change...

The design and evaluation of a phantom for the audit of the treatment chain for prostate radiotherapy

International Nuclear Information System (INIS)

Perrin, Bruce A.; Jordan, Thomas J.; Hounsell, Alan R.

2001-01-01

Background and Purpose: A phantom has been designed and built for a multi-institutional technique audit of the planning and delivery for radiotherapy to the prostate. The phantom was designed to test both the geometric and dosimetric accuracy of each aspect of the process. Materials and Methods: The phantom consists of two curved water filled perspex tanks either side of a central block of solid water equivalent material. There are two options for the central section; a target defining block and a dose measurement block. The target defining block uses air holes to define a 3-D target volume for imaging via a CT scanner or a simulator. These holes can subsequently be filled with steel pins to allow megavoltage imaging. The dose measurement block allows thimble chamber measurements to be made at pre-selected points in a 5x5mm array. Five dose measurement points, typical for a prostate planning target volume (PTV) were selected. Initial evaluation of the phantom was performed by auditing the prostate radiotherapy planning and treatment chain at one institution. Results: Agreement between the phantom and planned geometry confirmed that the stages of image acquisition, transfer and manipulation were accurately performed. Agreement within 0.5% was found between phantom and water tank measurements for dose calibration at a reference point. The measured dose delivered was within 2% of the dose calculated by the planning computer for all of the selected measurement points. The target volume marked by the steel pins was visible using electronic portal imaging. Conclusions: The phantom is a useful tool for the technique audit of prostate radiotherapy

Experimental design of membrane sensor for selective determination of phenazopyridine hydrochloride based on computational calculations

International Nuclear Information System (INIS)

Attia, Khalid A.M.; El-Abasawi, Nasr M.; Abdel-Azim, Ahmed H.

2016-01-01

Computational study has been done electronically and geometrically to select the most suitable ionophore to design a novel sensitive and selective electrochemical sensor for phenazopyridine hydrochloride (PAP). This study has revealed that sodium tetraphenylbarate (NaTPB) fits better with PAP than potassium tetrakis (KTClPB). The sensor design is based on the ion pair of PAP with NaTPB using dioctyl phthalate as a plasticizer. Under optimum conditions, the proposed sensor shows the slope of 59.5 mV per concentration decade in the concentration range of 1.0 × 10 −2 –1.0 × 10 −5 M with detection limit 8.5 × 10 −6 M. The sensor exhibits a very good selectivity for PAP with respect to a large number of interfering species as inorganic cations and sugars. The sensor enables track of determining PAP in the presence of its oxidative degradation product 2, 3, 6-Triaminopyridine, which is also its toxic metabolite. The proposed sensor has been successfully applied for the selective determination of PAP in pharmaceutical formulation. Also, the obtained results have been statistically compared to a reported electrochemical method indicating no significant difference between the investigated method and the reported one with respect to accuracy and precision. - Highlights: • Novel use of ISE for selective determination of phenazopyridine hydrochloride. • Investigating the degradation pathway of phenazopyridine with enough confirmation scan. • To avoid time-consuming and experimental trials, computational studies have been applied. • The proposed sensor shows high selectivity, reasonable detection limit and fast response.

Experimental design of membrane sensor for selective determination of phenazopyridine hydrochloride based on computational calculations

Energy Technology Data Exchange (ETDEWEB)

Attia, Khalid A.M.; El-Abasawi, Nasr M.; Abdel-Azim, Ahmed H., E-mail: Ahmed.hussienabdelazim@hotmil.com

2016-04-01

Computational study has been done electronically and geometrically to select the most suitable ionophore to design a novel sensitive and selective electrochemical sensor for phenazopyridine hydrochloride (PAP). This study has revealed that sodium tetraphenylbarate (NaTPB) fits better with PAP than potassium tetrakis (KTClPB). The sensor design is based on the ion pair of PAP with NaTPB using dioctyl phthalate as a plasticizer. Under optimum conditions, the proposed sensor shows the slope of 59.5 mV per concentration decade in the concentration range of 1.0 × 10{sup −2}–1.0 × 10{sup −5} M with detection limit 8.5 × 10{sup −6} M. The sensor exhibits a very good selectivity for PAP with respect to a large number of interfering species as inorganic cations and sugars. The sensor enables track of determining PAP in the presence of its oxidative degradation product 2, 3, 6-Triaminopyridine, which is also its toxic metabolite. The proposed sensor has been successfully applied for the selective determination of PAP in pharmaceutical formulation. Also, the obtained results have been statistically compared to a reported electrochemical method indicating no significant difference between the investigated method and the reported one with respect to accuracy and precision. - Highlights: • Novel use of ISE for selective determination of phenazopyridine hydrochloride. • Investigating the degradation pathway of phenazopyridine with enough confirmation scan. • To avoid time-consuming and experimental trials, computational studies have been applied. • The proposed sensor shows high selectivity, reasonable detection limit and fast response.

Multi-diameter pigging: factors affecting the design and selection of pigging tools for multi-diameter pipelines

Energy Technology Data Exchange (ETDEWEB)

Dawson, Karl [Pipeline Engineering and Supply Co. Ltd., Richmond, NY (United States)

2009-07-01

This paper will consider the process involved in pigging tool selection for pipelines with two or more significant internal diameters which require pigging tools capable of negotiating the different internal diameters whilst also carrying out the necessary pipeline cleaning operation. The paper will include an analysis of pipeline features that affect pigging tool selection and then go on to look at other variables that determine the pigging tool design; this will include a step by step guide outlining how the tool is designed, the development of prototype pigs and the importance of testing and validation prior to final deployment in operational pigging programmes. (author)

Human-centred methods in the design of an e-health solution for patients undergoing weight loss treatment

DEFF Research Database (Denmark)

Das, Anita; Svanæs, Dag

2013-01-01

Background and objective Patients undergoing weight loss treatment require follow-up as part of the treatment process. E-health solutions may be used for this purpose. We have used an iterative design approach to develop a patient-centred e-health solution for patients undergoing weight loss...... in the design process. Our findings imply that involving stakeholders separately during specific human-centred activities is important in order to capture subtle, but critical aspects of the users’ requirements. Conclusion Applying human-centred methods in the design of e-health solutions requires...... that designers must take particular considerations when patients and healthcare professionals are involved in the design process. Keywords E-health; Participatory design; User-centred design; Obesity; Weight loss treatment...

Clutches and brakes design and selection

CERN Document Server

Orthwein, William C

2004-01-01

FRICTION MATERIALSFriction CodeWearBrake FadeFriction MaterialsNotationReferencesBAND BRAKESDerivation of EquationsApplicationLever-Actuated Band Brake: Backstop DesignExample: Design of a BackstopNotationFormula CollectionReferencesEXTERNALLY AND INTERNALLY PIVOTED SHOE BRAKESPivoted External Drum BrakesPivoted Internal Drum BrakesDesign of Dual-Anchor Twin-Shoe Drum BrakesDual-Anchor Twin-Shoe Drum Brake Design ExamplesDesign of Single-Anchor Twin-Shoe Drum BrakesSingle-Anchor Twin-Shoe Drum Brake Design Exam

Design and selection criteria of a commercial irradiation facility for spices and dry products

International Nuclear Information System (INIS)

Aggarwal, K.S.

1990-01-01

Apart from cost considerations, various factors which should be taken into consideration in design of a commercial irradiation facility for spices and dry products and the factors which a user should consider for selecting a food irradiator are discussed in brief. (author)

A Course on Operational Considerations in Wastewater Treatment Plant Design. Instructor's Manual.

Science.gov (United States)

Cooper, John W.; And Others

This manual contains 17 instructional units (sequenced to correspond to parallel chapters in a student's manual) focusing on upgrading the design of wastewater plant facilities and serving as a reference source for establishing criteria for upgrading wastewater treatment plants. The manual also furnishes information for modifying plant design to…

Selective androgen receptor modulators for the treatment of late onset male hypogonadism.

Science.gov (United States)

Coss, Christopher C; Jones, Amanda; Hancock, Michael L; Steiner, Mitchell S; Dalton, James T

2014-01-01

Several testosterone preparations are used in the treatment of hypogonadism in the ageing male. These therapies differ in their convenience, flexibility, regional availability and expense but share their pharmacokinetic basis of approval and dearth of long-term safety data. The brevity and relatively reduced cost of pharmacokinetic based registration trials provides little commercial incentive to develop improved novel therapies for the treatment of late onset male hypogonadism. Selective androgen receptor modulators (SARMs) have been shown to provide anabolic benefit in the absence of androgenic effects on prostate, hair and skin. Current clinical development for SARMs is focused on acute muscle wasting conditions with defi ned clinical endpoints of physical function and lean body mass. Similar regulatory clarity concerning clinical deficits in men with hypogonadism is required before the beneficial pharmacology and desirable pharmacokinetics of SARMs can be employed in the treatment of late onset male hypogonadism.

Selective androgen receptor modulators for the treatment of late onset male hypogonadism

Directory of Open Access Journals (Sweden)

Christopher C Coss

2014-04-01

Full Text Available Several testosterone preparations are used in the treatment of hypogonadism in the ageing male. These therapies differ in their convenience, flexibility, regional availability and expense but share their pharmacokinetic basis of approval and dearth of long-term safety data. The brevity and relatively reduced cost of pharmacokinetic based registration trials provides little commercial incentive to develop improved novel therapies for the treatment of late onset male hypogonadism. Selective androgen receptor modulators (SARMs have been shown to provide anabolic benefit in the absence of androgenic effects on prostate, hair and skin. Current clinical development for SARMs is focused on acute muscle wasting conditions with defi ned clinical endpoints of physical function and lean body mass. Similar regulatory clarity concerning clinical deficits in men with hypogonadism is required before the beneficial pharmacology and desirable pharmacokinetics of SARMs can be employed in the treatment of late onset male hypogonadism.

Selective androgen receptor modulators for the treatment of late onset male hypogonadism

Science.gov (United States)

Coss, Christopher C; Jones, Amanda; Hancock, Michael L; Steiner, Mitchell S; Dalton, James T

2014-01-01

Several testosterone preparations are used in the treatment of hypogonadism in the ageing male. These therapies differ in their convenience, flexibility, regional availability and expense but share their pharmacokinetic basis of approval and dearth of long-term safety data. The brevity and relatively reduced cost of pharmacokinetic based registration trials provides little commercial incentive to develop improved novel therapies for the treatment of late onset male hypogonadism. Selective androgen receptor modulators (SARMs) have been shown to provide anabolic benefit in the absence of androgenic effects on prostate, hair and skin. Current clinical development for SARMs is focused on acute muscle wasting conditions with defined clinical endpoints of physical function and lean body mass. Similar regulatory clarity concerning clinical deficits in men with hypogonadism is required before the beneficial pharmacology and desirable pharmacokinetics of SARMs can be employed in the treatment of late onset male hypogonadism. PMID:24407183

Irradiation Performance of U-Mo Alloy Based ‘Monolithic’ Plate-Type Fuel – Design Selection

Energy Technology Data Exchange (ETDEWEB)

A. B. Robinson; G. S. Chang; D. D. Keiser, Jr.; D. M. Wachs; D. L. Porter

2009-08-01

A down-selection process has been applied to the U-Mo fuel alloy based monolithic plate fuel design, supported by irradiation testing of small fuel plates containing various design parameters. The irradiation testing provided data on fuel performance issues such as swelling, fuel-cladding interaction (interdiffusion), blister formation at elevated temperatures, and fuel/cladding bond quality and effectiveness. U-10Mo (wt%) was selected as the fuel alloy of choice, accepting a somewhat lower uranium density for the benefits of phase stability. U-7Mo could be used, with a barrier, where the trade-off for uranium density is critical to nuclear performance. A zirconium foil barrier between fuel and cladding was chosen to provide a predictable, well-bonded, fuel-cladding interface, allowing little or no fuel-cladding interaction. The fuel plate testing conducted to inform this selection was based on the use of U-10Mo foils fabricated by hot co-rolling with a Zr foil. The foils were subsequently bonded to Al-6061 cladding by hot isostatic pressing or friction stir bonding.

Selected applications of planar permanent magnet multipoles in FEL insertion device design

International Nuclear Information System (INIS)

Tatchyn, R.

1993-08-01

In recent work, a new class of magnetic multipoles based on planar configurations of permanent magnet (PM) material has been developed. These structures, in particular the quadrupole and sextupole, feature fully open horizontal apertures, and are comparable in effectiveness to conventional iron multipole structures. In this paper results of recent measurements of planar PM quadrupoles and sextupoles are reported and selected applications to FEL insertion device design are considered

Design and synthesis of novel chalcones as potent selective monoamine oxidase-B inhibitors.

Science.gov (United States)

Hammuda, Arwa; Shalaby, Raed; Rovida, Stefano; Edmondson, Dale E; Binda, Claudia; Khalil, Ashraf

2016-05-23

A novel series of substituted chalcones were designed and synthesized to be evaluated as selective human MAO-B inhibitors. A combination of either methylsulfonyl or trifluoromethyl substituents on the aromatic ketone moiety with a benzodioxol ring on the other end of the chalcone scaffold was investigated. The compounds were tested for their inhibitory activities on both human MAO-A and B. All compounds appeared to be selective MAO-B inhibitors with Ki values in the micromolar to submicromolar range. Molecular modeling studies have been performed to get insight into the binding mode of the synthesized compounds to human MAO-B active site. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Periodic table of virus capsids: implications for natural selection and design.

Science.gov (United States)

Mannige, Ranjan V; Brooks, Charles L

2010-03-04

For survival, most natural viruses depend upon the existence of spherical capsids: protective shells of various sizes composed of protein subunits. So far, general evolutionary pressures shaping capsid design have remained elusive, even though an understanding of such properties may help in rationally impeding the virus life cycle and designing efficient nano-assemblies. This report uncovers an unprecedented and species-independent evolutionary pressure on virus capsids, based on the the notion that the simplest capsid designs (or those capsids with the lowest "hexamer complexity", C(h)) are the fittest, which was shown to be true for all available virus capsids. The theories result in a physically meaningful periodic table of virus capsids that uncovers strong and overarching evolutionary pressures, while also offering geometric explanations to other capsid properties (rigidity, pleomorphy, auxiliary requirements, etc.) that were previously considered to be unrelatable properties of the individual virus. Apart from describing a universal rule for virus capsid evolution, our work (especially the periodic table) provides a language with which highly diverse virus capsids, unified only by geometry, may be described and related to each other. Finally, the available virus structure databases and other published data reiterate the predicted geometry-derived rules, reinforcing the role of geometry in the natural selection and design of virus capsids.

EDITORIAL: Special section: Selected papers from the Third European Workshop on Monte Carlo Treatment Planning (MCTP2012) Special section: Selected papers from the Third European Workshop on Monte Carlo Treatment Planning (MCTP2012)

Science.gov (United States)

Spezi, Emiliano; Leal, Antonio

2013-04-01

code, the authors report that software has been designed in a way that it should be independent of the type of MC code, provided that simulation meets a number of operational criteria. We wish to thank Elekta/CMS Inc., the University of Seville, the Junta of Andalusia and the European Regional Development Fund for their financial support. We would like also to acknowledge the members of EWG-MCTP for their help in peer-reviewing all the abstracts, and all the invited speakers who kindly agreed to deliver keynote presentations in their area of expertise. A final word of thanks to our colleagues who worked on the reviewing process of the papers selected for this special section and to the IOP Publishing staff who made it possible. MCTP2012 was accredited by the European Federation of Organisations for Medical Physics as a CPD event for medical physicists. Emiliano Spezi and Antonio Leal Guest Editors References Chakarova R, Müntzing K, Krantz M, E Hedin E and Hertzman S 2013 Monte Carlo optimization of total body irradiation in a phantom and patient geometry Phys. Med. Biol. 58 2461-69 Czarnecki D and Zink K 2013 Monte Carlo calculated correction factors for diodes and ion chambers in small photon fields Phys. Med. Biol. 58 2431-44 Mairani A, Böhlen T T, Schiavi A, Tessonnier T, Molinelli S, Brons S, Battistoni G, Parodi K and Patera V 2013 A Monte Carlo-based treatment planning tool for proton therapy Phys. Med. Biol. 58 2471-90 Marcatili S, Pettinato C, Daniels S, Lewis G, Edwards P, Fanti S and Spezi E 2013 Development and validation of RAYDOSE: a Geant4 based application for molecular radiotherapy Phys. Med. Biol. 58 2491-508 Miras H, Jiménez R, Miras C and Gomà C 2013 CloudMC: A cloud computing application for Monte Carlo simulation Phys. Med. Biol. 58 N125-33 Reynaert N 2007 First European Workshop on Monte Carlo Treatment Planning J. Phys.: Conf. Ser. 74 011001 Seuntjens J, Beaulieu L, El Naqa I and Després P 2012 Special section: Selected papers from the

Preliminary evaluation of organosolv pre-treatment of sugar cane bagasse for glucose production: Application of 23 experimental design

International Nuclear Information System (INIS)

Mesa, Leyanis; Gonzalez, Erenio; Ruiz, Encarnacion; Romero, Inmaculada; Cara, Cristobal; Felissia, Fernando; Castro, Eulogio

2010-01-01

Sugar cane bagasse was submitted to ethanol organosolv pre-treatment using a 50 L pilot scale reactor. The influence of catalyst type (H 2 SO 4 or NaOH), catalyst concentration (1.25-1.50% w/w on dry fiber) and process time (60-90 min) on total solid recovery and solid composition (glucan, xylan and lignin contents) was evaluated by performing a 2 3 full factorial experimental design. Pretreated sugar cane bagasse was further submitted to enzymatic hydrolysis using a commercial enzyme complex formed by cellulases and β-glucosidases. Glucose concentration in the hydrolysates and glucose yield referred to initial raw material (g glucose/100 g sugar cane bagasse) were used to select the best operational conditions. Concerning the enzymatic hydrolysis, the resulting glucose concentration was found to be dependent on xylan contents of the pretreated material. The modelling equations for glucose concentration and glucose yield as a function of the pre-treatment variables and the statistical analysis are also discussed in this work.

[Design and fabrication of the custom-made titanium condyle by selective laser melting technology].

Science.gov (United States)

Chen, Jianyu; Luo, Chongdai; Zhang, Chunyu; Zhang, Gong; Qiu, Weiqian; Zhang, Zhiguang

2014-10-01

To design and fabricate the custom-made titanium mandibular condyle by the reverse engineering technology combined with selective laser melting (SLM) technology and to explore the mechanical properties of the SLM-processed samples and the application of the custom-made condyle in the temporomandibular joint (TMJ) reconstruction. The three-dimensional model of the mandibular condyle was obtained from a series of CT databases. The custom-made condyle model was designed by the reverse engineering software. The mandibular condyle was made of titanium powder with a particle size of 20-65 µm as the basic material and the processing was carried out in an argon atmosphere by the SLM machine. The yield strength, ultimate strength, bending strength, hardness, surface morphology and roughness were tested and analyzed. The finite element analysis (FEA) was used to analyze the stress distribution. The complex geometry and the surface of the custom-made condyle can be reproduced precisely by the SLM. The mechanical results showed that the yield strength, ultimate strength, bending strength and hardness were (559±14) MPa, (659±32) MPa, (1 067±42) MPa, and (212±4)HV, respectively. The surface roughness was reduced by sandblast treatment. The custom-made titanium condyle can be fabricated by SLM technology which is time-saving and highly digitized. The mechanical properties of the SLM sample can meet the requirements of surgical implant material in the clinic. The possibility of fabricating custom-made titanium mandibular condyle combined with the FEA opens new interesting perspectives for TMJ reconstruction.

Analysis of Drug Design for a Selection of G Protein-Coupled Neuro-Receptors Using Neural Network Techniques

DEFF Research Database (Denmark)

Agerskov, Claus; Mortensen, Rasmus M.; Bohr, Henrik G.

2015-01-01

A study is presented on how well possible drug-molecules can be predicted with respect to their function and binding to a selection of neuro-receptors by the use of artificial neural networks. The ligands investigated in this study are chosen to be corresponding to the G protein-coupled receptors...... computational tools, able to aid in drug-design in a fast and cheap fashion, compared to conventional pharmacological techniques....... mu-opioid, serotonin 2B (5-HT2B) and metabotropic glutamate D5. They are selected due to the availability of pharmacological drug-molecule binding data for these receptors. Feedback and deep belief artificial neural network architectures (NNs) were chosen to perform the task of aiding drug-design.......925. The performance of 8 category networks (8 output classes for binding strength) obtained a prediction accuracy of above 60 %. After training the networks, tests were done on how well the systems could be used as an aid in designing candidate drug molecules. Specifically, it was shown how a selection of chemical...

Biomimicry in Product Design through Materials Selection and Computer Aided Engineering

Science.gov (United States)

Alexandridis, G.; Tzetzis, D.; Kyratsis, P.

2016-11-01

The aim of this study is to demonstrate a 7-step methodology that describes the way nature can act as a source of inspiration for the design and the development of a product. Furthermore, it suggests special computerized tools and methods for the product optimization regarding its environmental impact i.e. material selection, production methods. For validation purposes, a garden chaise lounge that imitates the form of a scorpion was developed as a result for the case study and the presentation of the current methodology.

Effect of tetracycline dose and treatment mode on selection of resistant coliform bacteria in nursery pigs

DEFF Research Database (Denmark)

Græsbøll, Kaare; Damborg, Peter; Mellerup, Anders

2017-01-01

This study describes the results of a randomized clinical trial investigating the effect of oxytetracycline treatment dose and mode of administration on the selection of antibiotic-resistant coliform bacteria in fecal samples from nursery pigs. Nursery pigs (pigs of 4 to 7 weeks of age) in five pig...... by the time that the pigs left the nursery unit. The counts and proportions of tetracyclineresistant coliforms did not vary significantly between treatment groups, except immediately after treatment, when the highest treatment dose resulted in the highest number of resistant coliforms. A control group treated...

Design and Discovery of Functionally Selective Serotonin 2C (5-HT2C) Receptor Agonists.

Science.gov (United States)

Cheng, Jianjun; McCorvy, John D; Giguere, Patrick M; Zhu, Hu; Kenakin, Terry; Roth, Bryan L; Kozikowski, Alan P

2016-11-10

On the basis of the structural similarity of our previous 5-HT 2C agonists with the melatonin receptor agonist tasimelteon and the putative biological cross-talk between serotonergic and melatonergic systems, a series of new (2,3-dihydro)benzofuran-based compounds were designed and synthesized. The compounds were evaluated for their selectivity toward 5-HT 2A , 5-HT 2B , and 5-HT 2C receptors in the calcium flux assay with the ultimate goal to generate selective 5-HT 2C agonists. Selected compounds were studied for their functional selectivity by comparing their transduction efficiency at the G protein signaling pathway versus β-arrestin recruitment. The most functionally selective compound (+)-7e produced weak β-arrestin recruitment and also demonstrated less receptor desensitization compared to serotonin in both calcium flux and phosphoinositide (PI) hydrolysis assays. We report for the first time that selective 5-HT 2C agonists possessing weak β-arrestin recruitment can produce distinct receptor desensitization properties.

Selection of Design Power of Wave Energy Converters Based on Wave Basin Experiments

DEFF Research Database (Denmark)

Martinelli, L.; Zanuttigh, B.; Kofoed, Jens Peter

2011-01-01

of the measured efficiency; description of the energy production by means of a function of the design capacity; application of a simple formula for cost benefit analysis. The analyses here proposed are based on the experimental results of 3D tests on two floating wave energy devices, named LEANCON and DEXA......Aim of this paper is to develop a method for selecting the optimal power generation capacity for which a wave energy converter (WEC) should be rated. This method is suitable for the earliest stages of development, when several studies are missing, including design of the Power Take Off (PTO) system...

High efficiency GaN-based LEDs using plasma selective treatment of p-GaN surface

Energy Technology Data Exchange (ETDEWEB)

Lee, Young-Bae; Naoi, Yoshiki; Sakai, Shiro [Department of Electrical and Electronic Engineering, University of Tokushima, 2-1 Minami-josanjima, Tokushima 770-8506 (Japan); Takaki, Ryohei; Sato, Hisao [Nitride Semiconductor Co., Ltd., 115-7 Itayajima, Akinokami, Seto-cho, Naruto, Tokushima 771-0360 (Japan)

2003-11-01

We have studied a new method of increasing the extraction efficiency of a GaN-based light-emitting diode (LED) using a plasma surface treatment. In this method, prior to the evaporation of a semitransparent p-metal, the surface of a p-GaN located beneath a p-pad is selectively exposed to a nitrogen plasma in a reactive ion etching (RIE) chamber. The electrical characteristics of the plasma treated p-GaN remarkably changes its resistivity into semi-insulator without any parasitic damage. Since the LEDs with a new method have no light absorption in a p-pad region, a higher optical power can be extracted compared to a conventional LEDs without plasma selective treatment on the p-GaN surface. (copyright 2003 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Selective Mutism: A Team Approach to Assessment and Treatment in the School Setting

Science.gov (United States)

Ponzurick, Joan M.

2012-01-01

The school nurse plays a pivotal role in the assessment and treatment of selective mutism (SM), a rare disorder found in elementary school children. Due to anxiety, children with SM do not speak in uncomfortable situations, primarily the school setting. Diagnosis of SM is often missed in the formative years because the child does speak at home.…

Integrated constructed wetland systems: design, operation, and performance of low-cost decentralized wastewater treatment systems.

Science.gov (United States)

Behrends, L L; Bailey, E; Jansen, P; Houke, L; Smith, S

2007-01-01

Several different types of constructed wetland systems are being used as decentralized treatment systems including surface-flow, subsurface-flow, vertical-flow, and hybrid systems. Archetypical wetland systems have design strengths and weaknesses, and therefore it should be possible to design combined (integrated) systems to optimize a number of important treatment processes. This study provides comparative efficacy data for two integrated wetland treatment systems (IWTS) designed to enhance treatment of medium strength wastewater generated from a pilot-scale intensive fish farm. Results from the twenty eight months study included consistently high removal of COD (84% +) and ammonia nitrogen (93%) in both systems. Initially, phosphorus removal was also high (>90%) in both systems, but removal efficacy declined significantly over time. Nitrate removal was significantly better in the system that provided sequential aerobic and anoxic environments. Short hydraulic retention times coupled with sustained removal of COD and ammonia indicate that the ReCip components could be a least-cost wastewater treatment technology in the decentralized market sector.

High Performance Enhancement-Mode AlGaN/GaN MIS-HEMT with Selective Fluorine Treatment

Directory of Open Access Journals (Sweden)

Chao Yang

2015-01-01

Full Text Available A novel enhancement-mode (E-mode Metal-Insulator-Semiconductor- (MIS- HEMT with selective fluorine ion (F− treatment is proposed and its mechanism is investigated. The HEMT features the Selective F− treatment both in the AlGaN channel region and in the thick passivation layer between the gate and drain (SFCP-MIS-HEMT. First, the F− in the passivation layer not only extends the depletion region and thus enhances the average electric field (E-field between the gate and drain by the assisted depletion effect but also reduces the E-field peak at the gate end, leading to a higher breakdown voltage (BV. Second, in the AlGaN channel region, the F− region realizes the E-mode and the region without F− maintains a high drain current (ID. Third, MIS structure suppresses the gate leakage current, increasing the gate swing voltage and the BV. Compared with a MIS-HEMT with F− treatment in whole channel (FC-MIS-HEMT, SFCP-MIS-HEMT increases the BV by 46% and the saturation drain current (ID,sat by 28%.

Design of zeolite ion-exchange columns for wastewater treatment

International Nuclear Information System (INIS)

Robinson, S.M.; Arnold, W.D.; Byers, C.H.

1991-01-01

Oak Ridge National Laboratory plans to use chabazite zeolites for decontamination of wastewater containing parts-per-billion levels of 90 Sr and 137 Cs. Treatability studies indicate that such zeolites can remove trace amounts of 90 Sr and 137 Cs from wastewater containing high concentrations of calcium and magnesium. These studies who that zeolite system efficiency is dependent on column design and operating conditions. Previous results with bench-scale, pilot-scale, and near-full-scale columns indicate that optimized design of full-scale columns could reduce the volume of spent solids generation by one-half. The data indicate that shortcut scale-up methods cannot be used to design columns to minimize secondary waste generation. Since the secondary waste generation rate is a primary influence on process cost effectiveness, a predictive mathematical model for column design is being developed. Equilibrium models and mass-transfer mechanisms are being experimentally determined for isothermal multicomponent ion exchange (Ca, Mg, Na, Cs, and Sr). Mathematical models of these data to determine the breakthrough curves for different column configurations and operating conditions will be used to optimize the final design of full-scale treatment plant. 32 refs., 6 figs., 3 tabs

Identification of effective treatment criteria for use in targeted selective treatment programs to control haemonchosis in periparturient ewes in Ontario, Canada.

Science.gov (United States)

Westers, T; Jones-Bitton, A; Menzies, P; VanLeeuwen, J; Poljak, Z; Peregrine, A S

2016-11-01

Haemonchosis is often associated with late gestation and parturition in ewes in Canada. Due to widespread concerns about development of anthelmintic resistance (AR), targeted selective treatment (TST), where individual animals are treated with an anthelmintic rather than the entire flock, is a possible strategy to control clinical signs in recently lambed ewes while still maintaining parasite refugia. Performing fecal egg counts (FEC) on individual animals is often cost-prohibitive, so indicators that identify ewes with high FEC are essential for TST programs. The study objectives were to: a) evaluate the ability of four TST indicators to identify periparturient ewes with high Haemonchus sp. FEC and b) determine appropriate treatment thresholds for statistically-significant indicators. A field study was conducted during the 2013 and 2014 lambing seasons (February-May) on three client-owned farms in Ontario with documented AR and problems with haemonchosis in ewes. Ewes were examined within three days of lambing and selected for treatment with oral closantel (10mg/kg body weight), a novel anthelmintic to Canada, if they met at least one of four criteria: a) the last grazing season was their first grazing season; b) body condition score ≤2; c) Faffa Malan Chart (FAMACHA © ) score ≥3; and/or d) three or more nursing lambs. Fecal samples were collected per rectum on the treatment day from each of 20 randomly selected treated and untreated ewes on each farm. Haemonchus sp. percentages on each farm, as determined by coproculture, ranged from 53% to 92% of total fecal trichostrongyle-type egg counts. Mean Haemonchus sp. FECs were significantly higher in treated ewes (n=136) than in untreated ewes (n=103) on the day of treatment in both years (p=0.001), suggesting the indicators were suitable for identifying animals with high Haemonchus sp. FEC. A linear mixed model was fit with logarithmic-transformed Haemonchus sp. FEC as the outcome variable, the four indicators

Selective elimination of chromophoric and fluorescent dissolved organic matter in a full-scale municipal wastewater treatment plant.

Science.gov (United States)

Yang, Xiaofang; Zhou, Zhongbo; Raju, Maddela Naga; Cai, Xiaoxuan; Meng, Fangang

2017-07-01

Effluent organic matter (EfOM) from municipal wastewater treatment plants potentially has a detrimental effect on both aquatic organisms and humans. This study evaluated the removal and transformation of chromophoric dissolved organic matter (CDOM) and fluorescent dissolved organic matter (FDOM) in a full-scale wastewater treatment plant under different seasons. The results showed that bio-treatment was found to be more efficient in removing bulk DOM (in term of dissolved organic carbon, DOC) than CDOM and FDOM, which was contrary to the disinfection process. CDOM and FDOM were selectively removed at various stages during the treatment. Typically, the low molecular weight fractions of CDOM and protein-like FDOM were more efficiently removed during bio-treatment process, whereas the humic-like FDOM exhibited comparable decreases in both bio-treatment and disinfection processes. Overall, the performance of the WWTP was weak in terms of CDOM and FDOM removal, resulting in enrichment of CDOM and FDOM in effluent. Moreover, the total removal of the bulk DOM (PCDOM and the humic-like FDOM showed little differences between summer and winter. In all, the results provide useful information for understanding the fate and transformation of DOM, illustrating that sub-fractions of DOM could be selectively removed depending on treatment processes and seasonality. Copyright © 2016. Published by Elsevier B.V.

Effects of selected coping strategies on impediment oriented ...

African Journals Online (AJOL)

The study was carried out to determine the effects of selected coping strategies on the impediment oriented academic stress of the visually impaired pupils in Oji- River School for the Blind, Enugu State. The study is a quasi-Experimental design involving two treatment groups and one control group. Twenty visually impaired ...

Effects of solvent-extraction contactor selection on flowsheet and facility design

International Nuclear Information System (INIS)

Whatley, M.E.

1982-01-01

The notion is developed that the selection of a solvent extraction contactor is part of a more general development of principles and philosophy guiding the overall plant design. Specifically, the requirements and constraints placed on the plant by the solvent extraction system must be consistent with those imposed by the other operations, which generally are more expensive and more complicated. Were a conservative philosophy employed throughout the plant, the choice of pulsed columns seem correct. Were the plant intended to employ modern techniques and state-of-the-art technology, particularly in remote maintenance and process control, the selection of centrifugal contactors seems appropriate. The process improvements attainable from employing more stages in a more tightly controlled solvent extraction system seem marginal at present when applied to conventional flowsheets, although the cost-benefit may be attractive in a modern plant. The potential for improvement through major flowsheet modification can not presently be assessed quantitatively

Selection of the Climate Parameters for a Building Envelopes and Indoor Climate Systems Design

Directory of Open Access Journals (Sweden)

Oleg Samarin

2017-09-01

Full Text Available The current research considers the principles of selection of the climate information needed for the building envelope and indoor climate design and adopted in Russia and some European countries. Special reference has been made to the shortcoming of methodologies that include the notion of a typical year, and the advantages of climate data sets generated via software-based designs, using pseudo-random number generators. The results of the average temperature of the coldest five-day period with various supplies were calculated using the numerical Monte-Carlo simulations, as well as the current climate data. It has been shown that there is a fundamental overlap between the statistical distribution of temperatures of both instances and the possibility of implementation a probabilistic-statistical method principle in the development of certain climate data, relative to envelopes and thermal conditions of a building. The calculated values were combined with the analytic expression of the normal law of random distribution and the correlations needed for the main parameter selection.

Predictive tools for designing new insulins and treatment regimens

DEFF Research Database (Denmark)

Klim, Søren

The thesis deals with the development of "Predictive tools for designing new insulins and treatments regimens" and consists of two parts: A model based approach for bridging properties of new insulin analogues from glucose clamp experiments to meal tolerance tests (MTT) and a second part that des......The thesis deals with the development of "Predictive tools for designing new insulins and treatments regimens" and consists of two parts: A model based approach for bridging properties of new insulin analogues from glucose clamp experiments to meal tolerance tests (MTT) and a second part...... that describes an implemented software program able to handle stochastic differential equations (SDEs) with mixed effects. The thesis is supplemented with scientific papers published during the PhD. Developing an insulin analogue from candidate molecule to a clinical drug consists of a development programme...... and efficacy are investigated. Numerous methods are used to quantify dose and efficacy in Phase II - especially of interest is the 24-hour meal tolerance test as it tries to portray near normal living conditions. Part I describes an integrated model for insulin and glucose which is aimed at simulating 24-hour...

Selection of optimal treatment scheme for brain metastases of non-small cell lung cancer

International Nuclear Information System (INIS)

Dong Mingxin; Zhao Tong; Huang Jingzi; Yu Shukun; Ma Yan; Tian Zhongcheng; Jin Xiangshun; Quan Jizhong; Liu Jin; Wang Dongxu

2006-01-01

Objective: To select the optimal treatment scheme for brain metastases of non-small cell lung cancers (NSCLCs). Methods: Seventy-two NSCLC cases diagnosesd by pathology with brain metastases were randomly classified into three groups, Group I, 24 cases with whole brain conventional external fractioned irradiation of D T 36-41 Gy/4-5 w, Group II, 22 eases with y-knife treatment plus whole brain conventional external fractioned irradiation, and Group III, 26 cases with γ-knife plus whole brain conventional external fractioned irradiation in combination with chemotherapy of Vm-26. The surrounding area of tumor was strictly covered with 50% para-central-dosal curve in γ-knife treatment (D T 16-25 Gy with a mean of 16 Gy). The muirleaf collimator was selected according to the volume of tumors. Chemotherapy of Vm-26 (60 mg/m 2 d1-3) was applied during the treatment with whole brain conventional external fractioned irradiation (D T 19-29 Gy/2-3 w), 21 days in a period, 2 periods in total. Results: The median survival time was estimated to be 6.0 months (ranged from 1.2 to 19.0 months) in the Group I, 9.2 months (4.4-30 months) in the Group II, and 10.8 months (5.2-42.2 months) in the Group III. The 1-year and 2-year survival rates were 34.6% and 12.6% , 62.2% and 30.2%, and 70.8% and 35.6% respectively in Group I, Group II, and Group III, respectively. Conclusion: For brain metastases of NSCLC, γ-knife plus whole brain conventional external fractioned irradiation combined with treatment of Vm-26 had a significantly beneficial influence on improvement of the local control and 1-year and 2-year survival. There was no complaint about the side-effects of the treatment. (authors)

Selective UV–O3 treatment for indium zinc oxide thin film transistors with solution-based multiple active layer

Science.gov (United States)

Kim, Yu-Jung; Jeong, Jun-Kyo; Park, Jung-Hyun; Jeong, Byung-Jun; Lee, Hi-Deok; Lee, Ga-Won

2018-06-01

In this study, a method to control the electrical performance of solution-based indium zinc oxide (IZO) thin film transistors (TFTs) is proposed by ultraviolet–ozone (UV–O3) treatment on the selective layer during multiple IZO active layer depositions. The IZO film is composed of triple layers formed by spin coating and UV–O3 treatment only on the first layer or last layer. The IZO films are compared by X-ray photoelectron spectroscopy, and the results show that the atomic ratio of oxygen vacancy (VO) increases in the UV–O3 treatment on the first layer, while it decreases on last layer. The device characteristics of the bottom gated structure are also improved in the UV–O3 treatment on the first layer. This indicates that the selective UV–O3 treatment in a multi-stacking active layer is an effective method to optimize TFT properties by controlling the amount of VO in the IZO interface and surface independently.

The influence of waste treatment, conditioning and packaging on design for disposal

International Nuclear Information System (INIS)

Tufton, E.P.S.; Whipp, H.G.; Putte, D.V.

1990-01-01

The design of a repository for low and intermediate level waste will always have a number of targets; safety, capacity, cost and ease of operation being prominent. Achieving the targets requires a total design of the waste management system, which ranges from treatment of the raw waste form at the source of arising to design for post-closure performance of the repository. In working on repository designs and their safety assessments, the authors have found that different waste forms have significant influences on the repository and this paper is concerned with those influences. 1 ref

Diffusion and Perfusion MR Imaging in Acute Stroke: Clinical Utility and Potential Limitations for Treatment Selection

DEFF Research Database (Denmark)

Bateman, Mathew; Slater, Lee-Anne; Leslie-Mazwi, Thabele M

2017-01-01

Magnetic resonance (MR) diffusion-weighted imaging (DWI) and perfusion-weighted imaging (PWI) offer unique insight into acute ischemic stroke pathophysiology. These techniques may offer the ability to apply pathophysiology to accurately individualize acute stroke reperfusion treatment, including ...... to be investigated in ongoing randomized controlled trials, and continued research into these techniques will help achieve the goal of tissue-based decision making and individualized acute stroke treatment....... extending the opportunity of reperfusion treatment to well beyond the current time-based treatment windows. This review examines the use of DWI and PWI in the major stroke trials, their current clinical utility, and potential limitations for reperfusion treatment selection. DWI and PWI continue...

Within-host selection of drug resistance in a mouse model of repeated interrupted treatment of Plasmodium yoelii infection

NARCIS (Netherlands)

Nuralitha, Suci; Siregar, Josephine E; Syafruddin, Din; Hoepelman, Andy I M; Marzuki, Sangkot

2017-01-01

BACKGROUND: To study within-host selection of resistant parasites, an important factor in the development of resistance to anti-malarial drugs, a mouse model of repeated interrupted malaria treatment (RIT) has been developed. The characteristics of within host selection of resistance to atovaquone

Design of safeguards information treatment system at the facility level

Energy Technology Data Exchange (ETDEWEB)

Song, Dae Yong; Lee, Byung Doo; Kwack, Eun Ho; Choi, Young Myong

2001-05-01

We are developing Safeguards Information Treatment System at the facility level(SITS) to manage synthetically safeguards information and to implement efficiently the obligations under the Korea-IAEA Safeguards Agreement, bilateral agreements with other countries and domestic law. In this report, we described the contents of the detailed design of SITS such as database, I/O layout and program. In the present, we are implementing the SITS based on the contents of the design of SITS, and then we plan to provide the system for the facilities after we finish implementing and testing the system.

Design of safeguards information treatment system at the facility level

International Nuclear Information System (INIS)

Song, Dae Yong; Lee, Byung Doo; Kwack, Eun Ho; Choi, Young Myong

2001-05-01

We are developing Safeguards Information Treatment System at the facility level(SITS) to manage synthetically safeguards information and to implement efficiently the obligations under the Korea-IAEA Safeguards Agreement, bilateral agreements with other countries and domestic law. In this report, we described the contents of the detailed design of SITS such as database, I/O layout and program. In the present, we are implementing the SITS based on the contents of the design of SITS, and then we plan to provide the system for the facilities after we finish implementing and testing the system

[Selective mutism].

Science.gov (United States)

Ytzhak, A; Doron, Y; Lahat, E; Livne, A

2012-10-01

Selective mutism is an uncommon disorder in young children, in which they selectively don't speak in certain social situations, while being capable of speaking easily in other social situations. Many etiologies were proposed for selective mutism including psychodynamic, behavioral and familial etc. A developmental etiology that includes insights from all the above is gaining support. Accordingly, mild language impairment in a child with an anxiety trait may be at the root of developing selective mutism. The behavior will be reinforced by an avoidant pattern in the family. Early treatment and followup for children with selective mutism is important. The treatment includes non-pharmacological therapy (psychodynamic, behavioral and familial) and pharmacologic therapy--mainly selective serotonin reuptake inhibitors (SSRI).

EFFECTS OF BEHAVIORAL SKILLS TRAINING ON PARENTAL TREATMENT OF CHILDREN'S FOOD SELECTIVITY

OpenAIRE

Seiverling, Laura; Williams, Keith; Sturmey, Peter; Hart, Sadie

2012-01-01

We used behavioral skills training to teach parents of 3 children with autism spectrum disorder and food selectivity to conduct a home-based treatment package that consisted of taste exposure, escape extinction, and fading. Parent performance following training improved during both taste sessions and probe meals and was reflected in increases in children's acceptance of bites and decreases in their disruptive behavior. Parents also reported that increases in diet variety were maintained at fo...

Social Communication Anxiety Treatment (S-CAT) for children and families with selective mutism: A pilot study.

Science.gov (United States)

Klein, Evelyn R; Armstrong, Sharon Lee; Skira, Kathryn; Gordon, Janice

2017-01-01

This research assessed the feasibility of Social Communication Anxiety Treatment (S-CAT) developed by Elisa Shipon-Blum, a brief multimodal approach, to increase social communication in 40 children aged 5-12 years with selective mutism (SM). SM is a disorder in which children consistently fail to speak in specific situations although they have the ability to do so. Key features of this approach are the SM-Social Communication Comfort Scale (SCCS), transfer of control (ToC), a nonchalant therapeutic style, and cognitive-behavioral strategies over a brief time frame. Following 9 weeks of treatment, children showed significant gains in speaking frequency on all 17 items from the Selective Mutism Questionnaire (SMQ), a standardized measure of SM severity. Children also showed decreased levels of anxiety and withdrawal as reported by parents on the Child Behavior Checklist (CBCL). SM initial symptom severity and family therapy compliance, but not duration of SM, contributed to treatment outcomes.

Socio-economic determinants in selecting childhood diarrhoea treatment options in Sub-Saharan Africa: A multilevel model

Directory of Open Access Journals (Sweden)

Lawoko Stephen

2011-03-01

Full Text Available Abstract Background Diarrhoea disease which has been attributed to poverty constitutes a major cause of morbidity and mortality in children aged five and below in most low-and-middle income countries. This study sought to examine the contribution of individual and neighbourhood socio-economic characteristics to caregiver's treatment choices for managing childhood diarrhoea at household level in sub-Saharan Africa. Methods Multilevel multinomial logistic regression analysis was applied to Demographic and Health Survey data conducted in 11 countries in sub-Saharan Africa. The unit of analysis were the 12,988 caregivers of children who were reported to have had diarrhoea two weeks prior to the survey period. Results There were variability in selecting treatment options based on several socioeconomic characteristics. Multilevel-multinomial regression analysis indicated that higher level of education of both the caregiver and that of the partner, as well as caregivers occupation were associated with selection of medical centre, pharmacies and home care as compared to no treatment. In contrast, caregiver's partners' occupation was negatively associated with selection medical centre and home care for managing diarrhoea. In addition, a low-level of neighbourhood socio-economic disadvantage was significantly associated with selection of both medical centre and pharmacy stores and medicine vendors. Conclusion In the light of the findings from this study, intervention aimed at improving on care seeking for managing diarrhoea episode and other childhood infectious disease should jointly consider the influence of both individual SEP and the level of economic development of the communities in which caregivers of these children resides.

A Controlled Single-Case Treatment of Severe Long-Term Selective Mutism in a Child with Mental Retardation

Science.gov (United States)

Facon, Bruno; Sahiri, Safia; Riviere, Vinca

2008-01-01

The aim of the present study was to demonstrate the efficacy of combining two operant learning procedures--shaping and fading--for treating selective mutism. The participant was a 12-year-old boy with mental retardation presenting a severe long-term selective mutism. The treatment was aimed at increasing the loudness of his vocalizations in an…

Design, building and use of a selective pyranometer for the definition and measurement of the lighting index

International Nuclear Information System (INIS)

Guicherd, Roger.

1976-03-01

The design, building, testing, calibration and operation of a selective pyranometer intended for the definition and measurement of the lighting index are described; with this original apparatus the energetic lighting at ground level is measured selectively and continuously. The measurement head has three transducers equipped with hollow hemispherical filters measuring energy in the ultraviolet, visible and infrared range respectively. In conclusion, a definition of the lighting index obtained with this thermally compensated, selective pyranometer P.S. is proposed [fr

Application of interval 2-tuple linguistic MULTIMOORA method for health-care waste treatment technology evaluation and selection.

Science.gov (United States)

Liu, Hu-Chen; You, Jian-Xin; Lu, Chao; Shan, Meng-Meng

2014-11-01

The management of health-care waste (HCW) is a major challenge for municipalities, particularly in the cities of developing countries. Selection of the best treatment technology for HCW can be viewed as a complicated multi-criteria decision making (MCDM) problem which requires consideration of a number of alternatives and conflicting evaluation criteria. Additionally, decision makers often use different linguistic term sets to express their assessments because of their different backgrounds and preferences, some of which may be imprecise, uncertain and incomplete. In response, this paper proposes a modified MULTIMOORA method based on interval 2-tuple linguistic variables (named ITL-MULTIMOORA) for evaluating and selecting HCW treatment technologies. In particular, both subjective and objective importance coefficients of criteria are taken into consideration in the developed approach in order to conduct a more effective analysis. Finally, an empirical case study in Shanghai, the most crowded metropolis of China, is presented to demonstrate the proposed method, and results show that the proposed ITL-MULTIMOORA can solve the HCW treatment technology selection problem effectively under uncertain and incomplete information environment. Copyright © 2014 Elsevier Ltd. All rights reserved.

Improving metabolic parameters of antipsychotic child treatment (IMPACT) study: rationale, design, and methods

OpenAIRE

Reeves, Gloria M; Keeton, Courtney; Correll, Christoph U; Johnson, Jacqueline L; Hamer, Robert M; Sikich, Linmarie; Hazzard, Lindsey; Alderman, Cheryl; Scheer, Abigail; Mabe, Micah; Kapoor, Sandeep; Sheridan, Eva; Borner, Irmgard; Bussell, Kristin; Pirmohamed, Sara

2013-01-01

Background Youth with serious mental illness may experience improved psychiatric stability with second generation antipsychotic (SGA) medication treatment, but unfortunately may also experience unhealthy weight gain adverse events. Research on weight loss strategies for youth who require ongoing antipsychotic treatment is quite limited. The purpose of this paper is to present the design, methods, and rationale of the Improving Metabolic Parameters in Antipsychotic Child Treatment (IMPACT) stu...

Design of ligands for the nicotinic acetylcholine receptors: the quest for selectivity.

Science.gov (United States)

Bunnelle, William H; Dart, Michael J; Schrimpf, Michael R

2004-01-01

In the last decade, nicotinic acetylcholine receptors (nAChRs) have emerged as important targets for drug discovery. The therapeutic potential of nicotinic agonists depends substantially on the ability to selectively activate certain receptor subtypes that mediate beneficial effects. The design of such compounds has proceeded in spite of a general shortage of data pertaining to subtype selectivity. Medicinal chemistry efforts have been guided principally by binding affinities to the alpha4beta2 and/or alpha7 subtypes, even though these are not predictive of agonist activity at either subtype. Nevertheless, a diverse family of nAChR ligands has been developed, and several analogs with promising therapeutic potential have now advanced to human clinical trials. This paper provides an overview of the structure-affinity relationships that continue to drive development of new nAChR ligands.

Nanoparticle array based optical frequency selective surfaces: theory and design.

Science.gov (United States)

Saeidi, Chiya; van der Weide, Daniel

2013-07-01

We demonstrate a synthesis procedure for designing a bandstop optical frequency selective surface (FSS) composed of nanoparticle (NP) elements. The proposed FSS uses two-dimensional (2-D) periodic arrays of NPs with subwavelength unit-cell dimensions. We derive equivalent circuit for a nanoparticle array (NPA) using the closed-form solution for a 2-D NPA excited by a plane wave in the limit of the dipole approximation, which includes contribution from both individual and collective plasmon modes. Using the extracted equivalent circuit, we demonstrate synthesis of an optical FSS using cascaded NPA layers as coupled resonators, which we validate with both circuit model and full-wave simulation for a third-order Butterworth bandstop prototype.

Analytical Modelling Of Milling For Tool Design And Selection

International Nuclear Information System (INIS)

Fontaine, M.; Devillez, A.; Dudzinski, D.

2007-01-01

This paper presents an efficient analytical model which allows to simulate a large panel of milling operations. A geometrical description of common end mills and of their engagement in the workpiece material is proposed. The internal radius of the rounded part of the tool envelope is used to define the considered type of mill. The cutting edge position is described for a constant lead helix and for a constant local helix angle. A thermomechanical approach of oblique cutting is applied to predict forces acting on the tool and these results are compared with experimental data obtained from milling tests on a 42CrMo4 steel for three classical types of mills. The influence of some tool's geometrical parameters on predicted cutting forces is presented in order to propose optimisation criteria for design and selection of cutting tools

Initial Selection of Supplemental Treatment Technologies for Hanford's Low-Activity Tank Waste

International Nuclear Information System (INIS)

Raymond, Richard E.; Powell, Roger W.; Hamilton, Dennis W.; Kitchen, William A.; Mauss, Billie M.; Brouns, Thomas M.

2004-01-01

In 2002, the U.S. Department of Energy (DOE) documented a plan for accelerating cleanup of the Hanford Site, located in southeastern Washington State, by at least 35 years (DOE 2002). A key element of the accelerated cleanup plan was a strategic initiative for acceleration of the tank waste program and completion of ''tank waste treatment by 2028 by increasing the capacity of the planned Waste Treatment Plant (ETP) and using supplemental technologies for waste treatment and immobilization''. The plan identified specific technologies to be evaluated for supplemental treatment of as much as 70% of the low-activity waste (LAW). The objective was to complete required testing and evaluation that would ''...bring an appropriate combination of the above technologies to deployment to supplement LAW treatment and immobilization in the WTP to achieve the completion of tank waste treatment by 2028''. In concert with this acceleration plan, DOE, the U.S. Environmental Protection Agency, and the Washington State Department of Ecology have proposed to accelerate from 2012 to 2005 the Hanford Federal Facility Compliance Agreement (Tri-Party Agreement) milestone (M-62-08) associated with a final decision on treatment of the balance of tank waste that is beyond the capacity of the currently designed WTP

Shield evaluation and validation for design and operation of facility for treatment of legacy Intermediate Level Radioactive Liquid Waste (ILW)

International Nuclear Information System (INIS)

Deepa, A.; Jakhete, A.P.; Rathish, K.R.; Saroj, S.K.; Patel, H.S.; Gopalakrishnan, R.K.; Gangadharan, Anand; Singh, Neelima

2014-01-01

An ion exchange treatment facility has been commissioned at PRIX facility, for the treatment of legacy ILW generated at reprocessing plant, Trombay. The treatment system is based on the deployment of selective sorbents for removal of cesium and strontium from ILW. Activity concentration due to beta emitters likely to be processed is of the order of 111-1850 MBq/l. Dose rates in different areas of the facility were evaluated using shielding code and design input. Present work give details of the comparison of dose rates estimated and dose rates measured at various stages of the processing of ILW. At PRIX, the ILW treatment system comprises of shielded IX columns (two cesium and one strontium) housed in a MS cubicle the process lines inlet and outlet of IX treatment system and effluent storage tanks. The MS cubicle, prefilter and piping are housed in a process cell of 500 mm concrete shielding. Effluent storage tanks are outside processing building. Theoretical assessment of expected dose rates were carried out prior to installation of various systems in different areas of PRIX. Dose rate on IX column and MS cubicle for a maximum inventory of 3.7x10 7 MBq of 137 Cs and its contribution in operating gallery was estimated

Designing wastewater treatment plants for small towns: a program in Visual Basic; Programa en Visual Basic de: Diseno de estaciones de depuracion de aguas residuales en pequenos y medianos nucleos

Energy Technology Data Exchange (ETDEWEB)

Coolado Lara, R. [Universidad de Cantabria (Spain)

2000-07-01

A program for designing wastewater treatment plants for towns of between 5 and 100,000 inhabitants is presented. This program, in Visual Basic for Windows, allows you to select several types of sewage: urban, farm and industrial, as well as percolation water and storm water. The program can choose between several types of pre-treatments, primary, secondary and tertiary treatments, until the required contamination level of the effluent is reached. The corresponding input and output forms are shown on the screen and a summary of the variables and a dimensioned drawing of the required solution can be printed out. (Author)

Development of engineering parameters for the design of metal biosorption waste treatment systems

Energy Technology Data Exchange (ETDEWEB)

Graham, W.S.

1991-12-03

Untreated landfill leachates and wastes from metal plating and mining operations are sources of environmental contamination by heavy metals. Because of their toxicity and potential for accumulation, the discharge of heavy metals must be controlled. Standard physical and chemical treatments used to remove metals from wastes such as concentration by electro-precipitation, ion exchange, solvent extraction, evaporative recovery, and conventional precipitation, are usually expensive and produce high quantities of sludge. Biosorption is the removal of metals from aqueous solutions by microorganisms. It is called biosorption rather than bioadsorption or bioaccumulation because the mechanisms of removal are not restricted to adsorption or metabolic uptake and so the more general term is preferable and has come to be accepted. In this thesis the focus is one two microorganisms and two metals. However, the possible combinations of conditions such as pH, relative metal molarities, time of contact, and organism are numerous. These experiments are designed to provide optimized parameters to facilitate the design of a functioning biosorption system. The two metals chosen for study are copper and lead in aqueous solution. The two types of microorganisms chosen for testing include an actinomycete and a fungus. The purpose of this research is to identify the significant engineering parameters to be evaluated include reaction rates, equilibrium partitioning of metal ions between those in solution and those removed to the cells, optimum pH for achieving the removal or recovery goal, and biosorption selectivity for one metal over another.

Basic design of alpha aqueous waste treatment process in NUCEF

Energy Technology Data Exchange (ETDEWEB)

Mineo, Hideaki; Matsumura, Tatsuro; Nishizawa, Ichio; Mitsui, Takeshi; Ueki, Hiroyuki; Wada, Atsushi; Sakai, Ichita; Takeshita, Isao [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Nishimura, Kenji

1996-11-01

This paper described the basic design of Alpha Aqueous Waste Treatment Process in NUCEF. Since various experiments using the TRU (transuranium) elements are carried out in NUCEF, wastes containing TRU elements arise. The liquid wastes in NUCEF are categorized into three types. Decontamination and volume reduction of the liquid waste mainly of recovery water from acid recovery process which has lowest radioactive concentration is the most important task, because the arising rate of the waste is large. The major function of the Alpha Aqueous Waste Treatment Process is to decontaminate the radioactive concentration below the level which is allowed to discharge into sea. Prior the process design of this facility, the followings are evaluated:property and arising rate of the liquid waste, room space to install and licensing condition. Considering varieties of liquid wastes and their large volume, the very high decontamination factor was proposed by a process of multiple evaporation supported with filtration and adsorption in the head end part and reverse osmosis in the distillate part. (author)

Design, Synthesis and Biological Evaluation of Histone Deacetylase (HDAC) Inhibitors: Saha (Vorinostat) Analogs and Biaryl Indolyl Benzamide Inhibitors Display Isoform Selectivity

Science.gov (United States)

Negmeldin, Ahmed Thabet

HDAC proteins have emerged as interesting targets for anti-cancer drugs due to their involvement in cancers, as well as several other diseases. Several HDAC inhibitors have been approved by the FDA as anti-cancer drugs, including SAHA (suberoylanilide hydroxamic acid, Vorinostat). Unfortunately, SAHA inhibits most HDAC isoforms, which limit its use as a pharmacological tool and may lead to side effects in the clinic. In this work we were interested in developing isoform selective HDAC inhibitors, which may decrease or eliminate the side effects associated with non-selective inhibitors treatment. In addition, isoform selective HDAC inhibitors can be used as biological tools to help understand the HDAC-related cancer biology. Our strategy was based on synthesis and screening of several derivatives of the non-selective FDA approved drug SAHA substituted at different positions of the linker region. Several SAHA analogs modified at the C4 and C5 positions of the linker were synthesized. The new C4- and C5-modified SAHA libraries, along with the previously synthesized C2-modified SAHA analogs were screened in vitro and in cellulo for HDAC isoform selectivity. Interestingly, several analogs exhibited dual HDAC6/HDAC8 selectivity. Enantioselective syntheses of the pure enantiomers of some of the interesting analogs were performed and the enantiomers were screened in vitro. Among the most interesting analogs, ( R)-C4-benzyl SAHA displayed 520- to 1300-fold selectivity for HDAC6 and HDAC8 over HDAC1, 2, and 3, with IC50 values of 48 and 27 nM with HDAC6 and 8, respectively. Docking studies were performed to provide structural rationale for the observed selectivity of the new analogs. In addition, rational design, synthesis, and screening of several other biaryl indolyl benzamide HDAC inhibitors is discussed, and some showed modest HDAC1 selectivity. The new biaryl indolyl benzamides can be useful to further develop HDAC1 selective inhibitors. The dual HDAC6/8 selective

Site selection and design basis of the National Disposal Facility for LILW. Geological and engineering barriers

International Nuclear Information System (INIS)

Boyanov, S.

2010-01-01

Content of the presentation: Site selection; Characteristics of the “Radiana” site (location, geological structure, physical and mechanical properties, hydro-geological conditions); Design basis of the Disposal Facility; Migration analysis; Safety assessment approach

Characterization and Design of Zeolite Catalysts Solid Acidity, Shape Selectivity and Loading Properties

CERN Document Server

Niwa, Miki; Okumura, Kazu

2010-01-01

Zeolites are microporous, aluminosilicate minerals commonly used as commercial adsorbents. Zeolite-based catalysts are used by industrial chemical companies in the interconversion of hydrocarbons and the alkylation of aromatic compounds. The current book deals with the characterization of specific properties of Zeolites and calculations for the design of catalysts. Measurements and utilization of solid acidity, shape selectivity, and loading properties, that are three prominent properties of a Zeolite catalyst, are treated in detail. These features concern chemical vapor deposition of silica, shape selectivity, loading properties, solid activity, Brønsted or Lewis character, ammonia temperature programmed desorption, control of the pore-opening size by chemical vapor deposition of silica and XAFS analysis of metals being highly dispersed inside and outside a framework.

From First Principles Design to Realization of Bimetallic Catalysts for Enhanced Selectivity

Energy Technology Data Exchange (ETDEWEB)

Lobo, Raul F.; Crooks, Richard M.; Mavrikakis, Manos

2014-04-08

“Catalysis by design” has been a dream for decades. To specify the composition and structure of matter to effect a desired catalytic transformation with desired and predicted rate and selectivity remains a monumental challenge, especially in heterogeneous catalysis. Our research thrusts have been chosen not only for their practical and scientific relevance, e.g. for more efficient and sustainable chemicals and fuels production, but also because they provide a foundation for developing and exploring broadly applicable principles and strategies for catalyst design.

A Genetic Algorithm for Selection of Fixed-Size Subsets with Application to Design Problems

Directory of Open Access Journals (Sweden)

Mark A. Wolters

2015-11-01

Full Text Available The R function kofnGA conducts a genetic algorithm search for the best subset of k items from a set of n alternatives, given an objective function that measures the quality of a subset. The function fills a gap in the presently available subset selection software, which typically searches over a range of subset sizes, restricts the types of objective functions considered, or does not include freely available code. The new function is demonstrated on two types of problem where a fixed-size subset search is desirable: design of environmental monitoring networks, and D-optimal design of experiments. Additionally, the performance is evaluated on a class of constructed test problems with a novel design that is interesting in its own right.

Super-selective uterine artery chemoembolization for the treatment of cervical cancer: its clinical value

International Nuclear Information System (INIS)

Zhu Chi; Zhang Dezhi; Cao Liyu; Xiong Zhuang; Wang Mingquan; Du Linan; Zhao Bensheng; Wang Wanqin; Sheng Qiang; Yu Yongqiang

2009-01-01

Objective: To evaluate super-selective uterine arterial chemoembolization therapy in the treatment of cervical cancer. Methods: Bilateral uterine arterial infusion with DDP, EADM or THP, MMC and 5-Fu was performed in 56 patients with pathologically-proved cervical cancer, which was followed by embolization of uterine arteries with iodine emulsion and Gelfoam particles. Radical hysterectomy was performed in 6 patients after interventional treatment. Results: Embolization of bilateral uterine arteries were successfully carried out in all cases. The angiography conducted during the procedure revealed markedly dilated uterine arteries, spiral tumor-feeding arteries and obvious tumor staining. The total effective rate was up to 94.6%. Six patients received radical hysterectomy 2 weeks after arterial chemoembolization, and the blood loss during the operation was much less than usual and the surgery procedure took shorter time. Ovarian necrosis was found in 1 case. The main adverse effects included leukocytopenia, nausea, vomiting and abdominal pain. Conclusion: Super-selective uterine arterial chemoembolization is a safe and effective supplementary therapy for cervical carcinoma with fewer complications. (authors)

RIP Input Tables From WAPDEG for LA Design Selection: Continuous Pre-Closure Ventilation

International Nuclear Information System (INIS)

K.G. Mon

1999-01-01

The purpose of this calculation is to document the creation of .tables for input into Integrated Probabilistic Simulator for Environmental Systems (RIP) version 5.19.01 (Golder Associates 1998) from Waste Package Degradation (WAPDEG) version 3.09 (CRWMS M and O 1998b. ''Software Routine Report for WAPDEG'' (Version 3.09)) simulations. This calculation details the creation of the RIP input tables (representing waste package corrosion degradation over time) for the License Application Design Selection (LADS) analysis of the effects of continuous pre-closure ventilation. Ventilation during the operational phase of the repository could remove considerable water from the system, as well as reduce temperatures. Pre-closure ventilation is LADS Design Feature 7

The treatment of severe child aggression (TOSCA study: Design challenges

Directory of Open Access Journals (Sweden)

Farmer Cristan A

2011-11-01

Full Text Available Abstract Background Polypharmacy (the concurrent use of more than one psychoactive drug and other combination interventions are increasingly common for treatment of severe psychiatric problems only partly responsive to monotherapy. This practice and research on it raise scientific, clinical, and ethical issues such as additive side effects, interactions, threshold for adding second drug, appropriate target measures, and (for studies timing of randomization. One challenging area for treatment is severe child aggression. Commonly-used medications, often in combination, include psychostimulants, antipsychotics, mood stabilizers, and alpha-2 agonists, which vary considerably in terms of perceived safety and efficacy. Results In designing our NIMH-funded trial of polypharmacy, we focused attention on the added benefit of a second drug (risperidone to the effect of the first (stimulant. We selected these two drugs because their associated adverse events might neutralize each other (e.g., sleep delay and appetite decrease from stimulant versus sedation and appetite increase from antipsychotic. Moreover, there was considerable evidence of efficacy for each drug individually for the management of ADHD and child aggression. The study sample comprised children (ages 6-12 years with both diagnosed ADHD and disruptive behavior disorder (oppositional-defiant or conduct disorder accompanied by severe physical aggression. In a staged sequence, the medication with the least problematic adverse effects (stimulant was openly titrated in 3 weeks to optimal effect. Participants whose behavioral symptoms were not normalized received additional double-blind medication, either risperidone or placebo, by random assignment. Thus children whose behavioral symptoms were normalized with stimulant medication were not exposed to an antipsychotic. All families participated in an empirically-supported parent training program for disruptive behavior, so that the actual

Mould Design and Material selection for Film Insert Moulding of Direct Methanol Fuel Cell Packaging

DEFF Research Database (Denmark)

Wöhner, Timo; Senkbeil, S.; Olesen, T. L.

2015-01-01

This paper presents the mould design for an injection moulding (IM) process for the production of a methanol container for the use in small, passive Direct Methanol Fuel Cell (DMFC) systems, which are intended to be used in behind-the-ear hearing aid systems. One of the crucial properties...... for the production of containers with different venting area and location of the venting holes and the use of different membrane thicknesses by using the same mould. Mould design and material selection are presented....

Simulation and Experimental Studies on Grain Selection and Structure Design of the Spiral Selector for Casting Single Crystal Ni-Based Superalloy.

Science.gov (United States)

Zhang, Hang; Xu, Qingyan

2017-10-27

Grain selection is an important process in single crystal turbine blades manufacturing. Selector structure is a control factor of grain selection, as well as directional solidification (DS). In this study, the grain selection and structure design of the spiral selector were investigated through experimentation and simulation. A heat transfer model and a 3D microstructure growth model were established based on the Cellular automaton-Finite difference (CA-FD) method for the grain selector. Consequently, the temperature field, the microstructure and the grain orientation distribution were simulated and further verified. The average error of the temperature result was less than 1.5%. The grain selection mechanisms were further analyzed and validated through simulations. The structural design specifications of the selector were suggested based on the two grain selection effects. The structural parameters of the spiral selector, namely, the spiral tunnel diameter ( d w ), the spiral pitch ( h b ) and the spiral diameter ( h s ), were studied and the design criteria of these parameters were proposed. The experimental and simulation results demonstrated that the improved selector could accurately and efficiently produce a single crystal structure.

Design of a pilot plant to study wastewater treatability. Utilization to nitrification-denitrification treatment of urban wastewater; Diseno de una plant pilot para estudios de tratabilidad de aguas residuales. Aplicacion a la nitrificacion/desnitrificaciond e aguas urbanas

Energy Technology Data Exchange (ETDEWEB)

Otal, E.; Vilches, L. F.; Pineda, D.; Garcia, A.; Fernandez-Pereira, C.

2002-07-01

The conventional design and the operation of secondary treatment of urban wastewater treatment plants presents different problems such as bulking foaming, the removal of nutrients as nitrogen and phosphorus, and the excess of sludge. to prevent these problems the use of selectors was initially proposed to selects the floc-formers bacteria against the filamentous microorganisms. In addition, these configurations removed nitrogen by the nitrification-denitrification mechanism and some of them removed both nitrogen and phosphors. In the last years, new systems have been developed to remove nitrogen, reducing the consumption of oxygen and the production of sludge by the use of different microorganisms, and by modifying environmental and operational conditions. To study the treatment urban wastewater in conditions similar to those existing in wastewater treatment plants and to improve the design and operational parameters of a large scale wastewater treatment plant, a versatile pilot plant has been designed. The main components of the plant are described in this paper. (Author) 18 refs.

Selection of resistant Streptococcus pneumoniae during penicillin treatment in vitro and in three animal models

DEFF Research Database (Denmark)

Knudsen, Jenny Dahl; Odenholt, Inga; Erlendsdottir, Helga

2003-01-01

Pharmacokinetic (PK) and pharmacodynamic (PD) properties for the selection of resistant pneumococci were studied by using three strains of the same serotype (6B) for mixed-culture infection in time-kill experiments in vitro and in three different animal models, the mouse peritonitis, the mouse....../ml was used in the rabbit tissue cage model. During the different treatment regimens, the differences in numbers of CFU between treated and control animals were calculated to measure the efficacies of the regimens. Selective media with erythromycin or different penicillin concentrations were used to quantify...

Operation technology of the ventilation system of the radioactive waste treatment facility(II) - Design and operation note

Energy Technology Data Exchange (ETDEWEB)

Lee, K. M.; Lee, B. C.; Bae, S. M. [Korea Atomic Energy Research Institute, Taejon (Korea)

1999-12-01

As the radioactive waste treatment work, such as compaction and/or solidification of wastes, are done directly by the workers in the Radioactive Waste Treatment Facility, the reasonable design and operation of the ventilation system is essential. In this report, the design criteria and specification of the ventilation equipment, system operation method are described for the effective design and operation of ventilation system in the radioactive waste treatment facility. And the anti-vibration work which was done in the Radioactive Waste Treatment Facility in KAERI to reduce the effect of vibration due to the continuous operation of big rotational equipment, the intake fans and the exhaust fans, are described in the report. 11 refs., 10 figs., 12 tabs. (Author)

Prevalence of Dental Fear and Anxiety amongst Patients in Selected Dental Clinics in Ghana

Science.gov (United States)

Ofori, Marian A.; Adu-Ababio, F.; Nyako, E. A.; Ndanu, Tom A.

2009-01-01

Objective: To find out the prevalence of dental anxiety and fear amongst patients in various selected dental clinics in Accra, Ghana. Study design: Dental patients (n = 279) who had either been exposed to dental treatments or had no prior dental exposure, attending four selected dental clinics in Accra were randomly sampled. They were interviewed…

Study Design and Rationale for the Phase 3 Clinical Development Program of Enobosarm, a Selective Androgen Receptor Modulator, for the Prevention and Treatment of Muscle Wasting in Cancer Patients (POWER Trials).

Science.gov (United States)

Crawford, Jeffrey; Prado, Carla M M; Johnston, Mary Ann; Gralla, Richard J; Taylor, Ryan P; Hancock, Michael L; Dalton, James T

2016-06-01

Muscle wasting in cancer is a common and often occult condition that can occur prior to overt signs of weight loss and before a clinical diagnosis of cachexia can be made. Muscle wasting in cancer is an important and independent predictor of progressive functional impairment, decreased quality of life, and increased mortality. Although several therapeutic agents are currently in development for the treatment of muscle wasting or cachexia in cancer, the majority of these agents do not directly inhibit muscle loss. Selective androgen receptor modulators (SARMs) have the potential to increase lean body mass (LBM) and hence muscle mass, without the untoward side effects seen with traditional anabolic agents. Enobosarm, a nonsteroidal SARM, is an agent in clinical development for prevention and treatment of muscle wasting in patients with cancer (POWER 1 and 2 trials). The POWER trials are two identically designed randomized, double-blind, placebo-controlled, multicenter, and multinational phase 3 trials to assess the efficacy of enobosarm for the prevention and treatment of muscle wasting in subjects initiating first-line chemotherapy for non-small-cell lung cancer (NSCLC). To assess enobosarm's effect on both prevention and treatment of muscle wasting, no minimum weight loss is required. These pivotal trials have pioneered the methodological and regulatory fields exploring a therapeutic agent for cancer-associated muscle wasting, a process hereby described. In each POWER trial, subjects will receive placebo (n = 150) or enobosarm 3 mg (n = 150) orally once daily for 147 days. Physical function, assessed as stair climb power (SCP), and LBM, assessed by dual-energy X-ray absorptiometry (DXA), are the co-primary efficacy endpoints in both trials assessed at day 84. Based on extensive feedback from the US Food and Drug Administration (FDA), the co-primary endpoints will be analyzed as a responder analysis. To be considered a physical function responder, a

Fabrication and heat treatment of high strength Al-Cu-Mg alloy processed using selective laser melting

Science.gov (United States)

Zhang, Hu; Zhu, Haihong; Nie, Xiaojia; Qi, Ting; Hu, Zhiheng; Zeng, Xiaoyan

2016-04-01

The proposed paper illustrates the fabrication and heat treatment of high strength Al-Cu-Mg alloy produced by selective laser melting (SLM) process. Al-Cu-Mg alloy is one of the heat treatable aluminum alloys regarded as difficult to fusion weld. SLM is an additive manufacturing technique through which components are built by selectively melting powder layers with a focused laser beam. The process is characterized by short laser-powder interaction times and localized high heat input, which leads to steep thermal gradients, rapid solidification and fast cooling. In this research, 3D Al-Cu-Mg parts with relative high density of 99.8% are produced by SLM from gas atomized powders. Room temperature tensile tests reveal a remarkable mechanical behavior: the samples show yield and tensile strengths of about 276 MPa and 402 MPa, respectively, along with fracture strain of 6%. The effect of solution treatment on microstructure and related tensile properties is examined and the results demonstrate that the mechanical behavior of the SLMed Al-Cu-Mg samples can be greatly enhanced through proper heat treatment. After T4 solution treatment at 540°C, under the effect of precipitation strengthening, the tensile strength and the yield strength increase to 532 MPa and 338 MPa, respectively, and the elongation increases to 13%.

Development of a novel set of criteria to select methodology for designing product service systems

Directory of Open Access Journals (Sweden)

Tuananh Tran

2016-04-01

Full Text Available This paper proposes eight groups of twenty nine scoring criteria that can help designers and practitioners to compare and select an appropriate methodology for a certain problem in designing product service system (PSS. PSS has been researched for more than a decade and is now becoming more and more popular in academia as well as industry. Despite that fact, the adoption of PSS is still limited for its potential. One of the main reasons is that designing PSS itself is a challenge. Designers and developers face difficulties in choosing appropriate PSS design methodologies for their projects so that they can design effective PSS offerings. By proposing eight groups of twenty nine scoring criteria, this paper enables a “step by step” process to identify the most appropriate design methodology for a company’s PSS problem. An example is also introduced to illustrate the use of the proposed scoring criteria and provide a clear picture of how different design methodologies can be utilized at their best in terms of application.

The effects of a new designed forearm orthosis in treatment of lateral epicondylitis.

Science.gov (United States)

Forogh, Bijan; Khalighi, Mohsen; Javanshir, Mohammad Ali; Ghoseiri, Kamiar; Kamali, Mohammad; Raissi, Gholamreza

2012-07-01

This paper reports on the design and testing of a new designed forearm orthosis and explores its efficacious in comparison to the standard counterforce orthosis in patients with lateral epicondylitis. Twenty-four patients were enrolled in this assessor-blinded clinical trial and randomly assigned to two parallel treatment groups. The measures of pain and function, the pain threshold and grip strength were compared using patient rated tennis elbow evaluation (PRTEE) form, algometer and dynamometer respectively at baseline and 4 weeks after treatment. Paired and independent t-test statistical methods recruited for within and between groups comparisons respectively. The both orthoses, counterforce and new-designed, significantly relieved pain, and improved function, pain threshold and grip strength of all patients after 4 weeks application. The new-designed orthosis seemed to be more effective than the counterforce orthosis in pain relief, but there was not any significant difference in efficacious of two types of orthoses regarding function. The new-designed orthosis can significantly relieve pain, improve function, increase pain threshold and grip strength after application. This orthosis seemed to be more effective than counterforce orthosis in relieving pain and increasing the pain threshold probably due to the limitation of forearm supination.

Selecting appropriate wastewater treatment technologies using a choosing-by-advantages approach.

Science.gov (United States)

Arroyo, Paz; Molinos-Senante, María

2018-06-01

Selecting the most sustainable wastewater treatment (WWT) technology among possible alternatives is a very complex task because the choice must integrate economic, environmental, and social criteria. Traditionally, several multi-criteria decision-making approaches have been applied, with the most often used being the analytical hierarchical process (AHP). However, AHP allows users to offset poor environmental and/or social performance with low cost. To overcome this limitation, our study examines a choosing-by-advantages (CBA) approach to rank seven WWT technologies for secondary WWT. CBA results were compared with results obtained by using the AHP approach. The rankings of WWT alternatives differed, depending on whether the CBA or AHP approach was used, which highlights the importance of the method used to support decision-making processes, particularly ones that rely on subjective interpretations by experts. This paper uses a holistic perspective to demonstrate the benefits of using the CBA approach to support a decision-making process when a group of experts must come to a consensus in selecting the most suitable WWT technology among several available. Copyright © 2017 Elsevier B.V. All rights reserved.

Design of Wear-Resistant Austenitic Steels for Selective Laser Melting

Science.gov (United States)

Lemke, J. N.; Casati, R.; Lecis, N.; Andrianopoli, C.; Varone, A.; Montanari, R.; Vedani, M.

2018-03-01

Type 316L stainless steel feedstock powder was modified by alloying with powders containing carbide/boride-forming elements to create improved wear-resistant austenitic alloys that can be readily processed by Selective Laser Melting. Fe-based alloys with high C, B, V, and Nb contents were thus produced, resulting in a microstructure that consisted of austenitic grains and a significant amount of hard carbides and borides. Heat treatments were performed to modify the carbide distribution and morphology. Optimal hard-phase spheroidization was achieved by annealing the proposed alloys at 1150 °C for 1 hour followed by water quenching. The total increase in hardness of samples containing 20 pct of C/B-rich alloy powder was of 82.7 pct while the wear resistance could be increased by a factor of 6.

Selection of Steady-State Process Simulation Software to Optimize Treatment of Radioactive and Hazardous Waste

International Nuclear Information System (INIS)

Nichols, T. T.; Barnes, C. M.; Lauerhass, L.; Taylor, D. D.

2001-01-01

The process used for selecting a steady-state process simulator under conditions of high uncertainty and limited time is described. Multiple waste forms, treatment ambiguity, and the uniqueness of both the waste chemistries and alternative treatment technologies result in a large set of potential technical requirements that no commercial simulator can totally satisfy. The aim of the selection process was two-fold. First, determine the steady-state simulation software that best, albeit not completely, satisfies the requirements envelope. And second, determine if the best is good enough to justify the cost. Twelve simulators were investigated with varying degrees of scrutiny. The candidate list was narrowed to three final contenders: ASPEN Plus 10.2, PRO/II 5.11, and CHEMCAD 5.1.0. It was concluded from ''road tests'' that ASPEN Plus appears to satisfy the project's technical requirements the best and is worth acquiring. The final software decisions provide flexibility: they involve annual rather than multi-year licensing, and they include periodic re-assessment

Selection of Steady-State Process Simulation Software to Optimize Treatment of Radioactive and Hazardous Waste

Energy Technology Data Exchange (ETDEWEB)

Nichols, Todd Travis; Barnes, Charles Marshall; Lauerhass, Lance; Taylor, Dean Dalton

2001-06-01

The process used for selecting a steady-state process simulator under conditions of high uncertainty and limited time is described. Multiple waste forms, treatment ambiguity, and the uniqueness of both the waste chemistries and alternative treatment technologies result in a large set of potential technical requirements that no commercial simulator can totally satisfy. The aim of the selection process was two-fold. First, determine the steady-state simulation software that best, albeit not completely, satisfies the requirements envelope. And second, determine if the best is good enough to justify the cost. Twelve simulators were investigated with varying degrees of scrutiny. The candidate list was narrowed to three final contenders: ASPEN Plus 10.2, PRO/II 5.11, and CHEMCAD 5.1.0. It was concluded from "road tests" that ASPEN Plus appears to satisfy the project's technical requirements the best and is worth acquiring. The final software decisions provide flexibility: they involve annual rather than multi-year licensing, and they include periodic re-assessment.

Effect of biofilm and selective mixed culture on microbial fuel cell for the treatment of tempeh industrial wastewater