WorldWideScience

Sample records for selection criteria produced

  1. Green Supplier Selection Criteria

    DEFF Research Database (Denmark)

    Nielsen, Izabela Ewa; Banaeian, Narges; Golinska, Paulina

    2014-01-01

    Green supplier selection (GSS) criteria arise from an organization inclination to respond to any existing trends in environmental issues related to business management and processes, so GSS is integrating environmental thinking into conventional supplier selection. This research is designed...... to determine prevalent general and environmental supplier selection criteria and develop a framework which can help decision makers to determine and prioritize suitable green supplier selection criteria (general and environmental). In this research we considered several parameters (evaluation objectives......) to establish suitable criteria for GSS such as their production type, requirements, policy and objectives instead of applying common criteria. At first a comprehensive and deep review on prevalent and green supplier selection literatures performed. Then several evaluation objectives defined to assess the green...

  2. Donor selection criteria and procurement

    International Nuclear Information System (INIS)

    Agcaoili, N.R.

    1999-01-01

    Donor selection is one of the most important aspects of tissue banking practice. Without a good donor selection criteria, the results of any effort of trying to preserve tissues will have disastrous outcome for the recipient of these tissues. While with a very good and strict donor selection the Tissue Bank can guarantee safe and effective tissue allografts. There are significant aspects in the history and physical examination of the donor that must be emphasized. A donor exclusion criteria has also been formulated together with a list of all the needed laboratory examinations to eliminate possible diseases that may be transferred from the donor. The methods of procurement of tissue allografts from living and cadaver donors will be described. The limitations and advantages of each will be taken.There are also special restrictions that are important in the practice of removing the tissues from the donors. All the necessary equipment should be ready and the potential risk on the personnel should be known to all doing Tissue Banking

  3. Selection criteria for dental radiography

    International Nuclear Information System (INIS)

    1998-01-01

    The Faculty of General Dental Practitioners (UK) has a declared commitment to 'improving the standards of patient care'. By the provision of standards and guidelines it aims to help the profession to achieve this goal. Standards and guidelines are simply tools a dentist may use to improve treatment planning and care outcomes. The Self-Assessment Manual and Standards, SAMS, first published in 1991, is now well known to the profession and has become a frequently quoted source in clinical audit and quality assurance initiatives. Since its publication the scientific methodology of systematic reviews of the literature has progressed dramatically and this book is based on these developments. Evidence-based care is well established in medicine and dentistry and these selection criteria and guidelines follow these established protocols by basing advice on the available scientific evidence wherever possible. This book's purpose is a practical one, it is not intended to be limiting or restrictive but to be useful in the decision-making process. This is the first in a series of standards documents from the FGDP(UK) which are based on reviews of the scientific literature and employ the Scottish Intercollegiate Guideline Network (SIGN) methodology for guideline production. They are not constraints but an aid to effective treatment planning and patient care

  4. Practice tip. Producing newsletters - criteria for success.

    Science.gov (United States)

    Eckermann, Sarah Louise; McIntyre, Ellen; Magarey, Anne

    2007-01-01

    Newsletters, while informal when compared to peer reviewed journals and organisational reports, are a popular communication tool used to provide and share information, for and about people with a common interest or need. Newsletters are an effective way to build networks and improve communication. As the editors of several newsletters in primary health care, the authors have developed criteria that aim to increase the success of a newsletter.

  5. Criteria for the selection of ERP software

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available The implementation of an ERP software package is an important investment for an organization, which is characterized also by a high degree of risk. Selecting the most appropriate software is a necessary condition for a successful implementation. This paper is describing the major aspects of software selection in general and the relevant criteria in the case of ERP software.

  6. Credit Card Selection Criteria: Singapore Perspective

    OpenAIRE

    Lydia L. Gan; Ramin Cooper Maysami

    2006-01-01

    This study used factor analysis to examine credit card selection criteria among Singaporeans. The results showed that convenience of use and protection, economics, and flexibility were the main drivers, while the reputation of card was the least important in determining credit card selection in Singapore. Demographic results showed that high-income earners, the better educated, the elderly, married and the professional preferred the convenience-protection factor to the economic-promotional fa...

  7. 28 CFR 34.3 - Selection criteria.

    Science.gov (United States)

    2010-07-01

    ... achievement of project objectives; (4) The project management structure is adequate to the successful conduct of the project; (5) Organizational capability is demonstrated at a level sufficient to successfully....3 Selection criteria. (a) All individual project applications will, at a minimum, be subject to...

  8. Reliability criteria selection for integrated resource planning

    International Nuclear Information System (INIS)

    Ruiu, D.; Ye, C.; Billinton, R.; Lakhanpal, D.

    1993-01-01

    A study was conducted on the selection of a generating system reliability criterion that ensures a reasonable continuity of supply while minimizing the total costs to utility customers. The study was conducted using the Institute for Electronic and Electrical Engineers (IEEE) reliability test system as the study system. The study inputs and results for conditions and load forecast data, new supply resources data, demand-side management resource data, resource planning criterion, criterion value selection, supply side development, integrated resource development, and best criterion values, are tabulated and discussed. Preliminary conclusions are drawn as follows. In the case of integrated resource planning, the selection of the best value for a given type of reliability criterion can be done using methods similar to those used for supply side planning. The reliability criteria values previously used for supply side planning may not be economically justified when integrated resource planning is used. Utilities may have to revise and adopt new, and perhaps lower supply reliability criteria for integrated resource planning. More complex reliability criteria, such as energy related indices, which take into account the magnitude, frequency and duration of the expected interruptions are better adapted than the simpler capacity-based reliability criteria such as loss of load expectation. 7 refs., 5 figs., 10 tabs

  9. Geomembrane selection criteria for uranium tailings ponds

    International Nuclear Information System (INIS)

    Mitchell, D.H.; Cuello, R.

    1986-09-01

    The selection criteria, particularly those involving chemical compatibility, of geomembranes to be used in ponds at uranium mill operations are discussed. The principal functional criteria which a geomembrane must meet for this application are: (1) a specified service life and (2) low permeability. Chemical compatibility with the waste is essential in meeting these functional criteria. In two different types of aging tests using simulated acidic uranium mill waste, degradation of chemical and physical properties were examined in geomembranes of high-density polyethylene, polyvinyl chloride, and chlorosulfonated polyethylene. Compatibility tests according to the National Sanitation Foundation procedures are recommended to ascertain the stability of certain physical properties of the proposed geomembrane. Actual experience with a specific geomembrane in an identical application is probably the best method to assure compatibility; however, this experience is frequently not available. Experience with a geomembrane in similar applications is valuable in the selection process, however, small differences in either the geomembrane formulation or the waste composition may result in large differences in performance of the geomembrane. It is likely that many geomembranes have acceptable chemical stability for typical uranium mill applications, therefore, additional factors in the selection processes will include seaming characteristics, mechanical properties, site characteristics, and costs

  10. Selection criteria for internships in clinical neuropsychology.

    Science.gov (United States)

    Ritchie, David; Odland, Anthony P; Ritchie, Abigail S; Mittenberg, Wiley

    2012-01-01

    Criteria used in the evaluation and selection of applicants for clinical neuropsychology internships were identified by a survey of programs that met guidelines for specialty training. The number of internships that offer training with specialization in clinical neuropsychology has more than doubled during the past 10 years. Supervising neuropsychologists from 75 programs replied to the survey, yielding a 72.8% response rate. Clinical experience in neuropsychological assessment, specialization in clinical neuropsychology during graduate education, personal interview, and letters of recommendation were reported to be the most salient selection criteria. Practica that provide experience with flexible or functional systems assessment approaches at university-affiliated or VA (U.S. Department of Veterans Affairs) medical centers and doctoral curricula that follow International Neuropsychological Society/Division 40 course guidelines, with teaching and supervision provided by neuropsychologists, were preferred prerequisites to internship. These results are consistent with selection criteria reported over a decade ago and indicate continued endorsement of the vertically integrated model of education and training outlined by the Houston Conference on Specialty Education and Training in Clinical Neuropsychology.

  11. Quality criteria for phase change materials selection

    International Nuclear Information System (INIS)

    Vitorino, Nuno; Abrantes, João C.C.; Frade, Jorge R.

    2016-01-01

    Highlights: • Selection criteria of phase change materials for representative applications. • Selection criteria based on reliable solutions for latent heat transfer. • Guidelines for the role of geometry and heat transfer mechanisms. • Performance maps based on PCM properties, operating conditions, size and time scales. - Abstract: Selection guidelines are primary criterion for optimization of materials for specific applications in order to meet simultaneous and often conflicting requirements. This is mostly true for technologies and products required to meet the main societal needs, such as energy. In this case, gaps between supply and demand require strategies for energy conversion and storage, including thermal storage mostly based on phase change materials. Latent heat storage is also very versatile for thermal management and thermal control by allowing high storage density within narrow temperature ranges without strict dependence between stored thermal energy and temperature. Thus, this work addressed the main issues of latent heat storage from a materials selection perspective, based on expected requirements of applications in thermal energy storage or thermal regulation. Representative solutions for the kinetics of latent heat charge/discharge were used to derive optimization guidelines for high energy density, high power, response time (from fast response to thermal inertia), etc. The corresponding property relations were presented in graphical forms for a wide variety of prospective phase change materials, and for wide ranges of operating conditions, and accounting for changes in geometry and mechanisms.

  12. Eye bank procedures: donor selection criteria.

    Science.gov (United States)

    Sousa, Sidney Júlio de Faria E; Sousa, Stella Barretto de Faria E

    2018-01-01

    Eye banks use sterile procedures to manipulate the eye, antiseptic measures for ocular surface decontamination, and rigorous criteria for donor selection to minimize the possibility of disease transmission due to corneal grafting. Donor selection focuses on analysis of medical records and specific post-mortem serological tests. To guide and standardize procedures, eye bank associations and government agencies provide lists of absolute and relative contraindications for use of the tissue based on donor health history. These lists are guardians of the Hippocratic principle "primum non nocere." However, each transplantation carries risk of transmission of potentially harmful agents to the recipient. The aim of the procedures is not to eliminate risk, but limit it to a reasonable level. The balance between safety and corneal availability needs to be maintained by exercising prudence without disproportionate rigor.

  13. Selection Criteria for Water Disinfection Techniques in Agricultural Practices

    OpenAIRE

    Haute, Sam van; Sampers, Imca; Jacxsens, Liesbeth; Uyttendaele, Mieke

    2013-01-01

    This paper comprises a selection tool for water disinfection methods for fresh produce pre- and postharvest practices. A variety of water disinfection technologies is available on the market and no single technology is the best choice for all applications. It can be difficult for end users to choose the technology that is best fit for a specific application. Therefore, the different technologies were characterized in order to identify criteria that influence the suitability of a technology fo...

  14. Selection criteria for water disinfection techniques in agricultural practices.

    Science.gov (United States)

    Haute, Sam van; Sampers, Imca; Jacxsens, Liesbeth; Uyttendaele, Mieke

    2015-01-01

    This paper comprises a selection tool for water disinfection methods for fresh produce pre- and postharvest practices. A variety of water disinfection technologies is available on the market and no single technology is the best choice for all applications. It can be difficult for end users to choose the technology that is best fit for a specific application. Therefore, the different technologies were characterized in order to identify criteria that influence the suitability of a technology for pre- or postharvest applications. Introduced criteria were divided into three principal components: (i) criteria related to the technology and which relate to the disinfection efficiency, (ii) attention points for the management and proper operation, and (iii) necessities in order to sustain the operation with respect to the environment. The selection criteria may help the end user of the water disinfection technology to obtain a systematic insight into all relevant aspects to be considered for preliminary decision making on which technologies should be put to feasibility testing for water disinfection in pre- and postharvest practices of the fresh produce chain.

  15. Liver Transplantation: Evolving Patient Selection Criteria

    Directory of Open Access Journals (Sweden)

    Andy S Yu

    2001-01-01

    Full Text Available The widespread recognition of the success of liver transplantation as a treatment for most types of acute and chronic liver failure has led to increased referrals for transplantation in the setting of a relatively fixed supply of cadaver donor organs. These events have led to a marked lengthening of the waiting time for liver transplantation, resulting in increased deaths of those on the waiting list and sicker patients undergoing transplantation. Nearly 5000 liver transplantations were performed in the United States in 2000, while the waiting list grew to over 17,000 patients. The mounting disparity between the number of liver transplant candidates and the limited supply of donor organs has led to reassessment of the selection and listing criteria for liver transplantation, as well as revision of organ allocation and distribution policies for cadaver livers. The development of minimal listing criteria for patients with chronic liver disease based on a specific definition for decompensation of cirrhosis has facilitated the more uniform listing of patients at individual centres across the United States. The United Network for Organ Sharing, under pressure from transplant professionals, patient advocacy groups and the federal government, has continuously revised allocation and distribution policies based on the ethical principles of justice for the individual patient versus optimal utility of the limited organ supply available annually. Beginning in 2002, it is likely that the Model for End-stage Liver Disease (MELD score will be implemented to determine disease severity and direct donor organs to the sickest patients rather than to those with the longest waiting times.

  16. 7 CFR 1948.80 - Planning grant selection criteria.

    Science.gov (United States)

    2010-01-01

    ... financial resources available for such planning; (d) The planning priorities and recommended funding level... 7 Agriculture 13 2010-01-01 2009-01-01 true Planning grant selection criteria. 1948.80 Section... Development Assistance Program § 1948.80 Planning grant selection criteria. The following criteria will be...

  17. Selection of disposal contractor by multi criteria decision making methods

    Directory of Open Access Journals (Sweden)

    Cenker Korkmazer

    2016-08-01

    Full Text Available Hazardous waste is substance that threaten people and environment in case of improper storage, disposal and transport due to its concentration, physical and chemical properties. Companies producing hazardous waste as a result of several activities mostly do not have any own disposal facilities. In addition, they do not pay attention enough to determine the right contractor as a disposal facility. On the other hand, there are various qualitative and quantitative criteria affecting the selection of the contractor and conflicting with each other. The aim of the performed study is to assist one of these companies producing hazardous waste in the selection of the best contractor that eliminates hazardous waste economic and harmless way. In the study, contractor weights in percentage is calculated by using Analytic Network Process (ANP as one of the multi-criteria decision making (MCDM methods and widely used in the literature which considers both qualitative and quantitative criteria. In the next step, by the help of the mathematical model, contractors that will be given which type of hazardous waste are identified. This integrated approach can be used as a guide for similar firms.

  18. 7 CFR 1469.6 - Enrollment criteria and selection process.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Enrollment criteria and selection process. 1469.6... General Provisions § 1469.6 Enrollment criteria and selection process. (a) Selection and funding of... existing natural resource, environmental quality, and agricultural activity data along with other...

  19. 77 FR 12234 - Changes in Hydric Soils Database Selection Criteria

    Science.gov (United States)

    2012-02-29

    ... Conservation Service [Docket No. NRCS-2011-0026] Changes in Hydric Soils Database Selection Criteria AGENCY... Changes to the National Soil Information System (NASIS) Database Selection Criteria for Hydric Soils of the United States. SUMMARY: The National Technical Committee for Hydric Soils (NTCHS) has updated the...

  20. Bayesian item selection criteria for adaptive testing

    NARCIS (Netherlands)

    van der Linden, Willem J.

    1996-01-01

    R.J. Owen (1975) proposed an approximate empirical Bayes procedure for item selection in adaptive testing. The procedure replaces the true posterior by a normal approximation with closed-form expressions for its first two moments. This approximation was necessary to minimize the computational

  1. Physiological selection criteria in forage grasses

    International Nuclear Information System (INIS)

    Cooper, J.P.

    1975-01-01

    The plant breeder has to develop varieties that provide the most efficient conversion of environmental inputs and have sufficient resistance to environmental stress. The most important physiological features that determine crop production and for which the plant breeder will have to select are discussed. Tracer studies may be of help to the breeder at the investigational level but in the longer term may also provide direct screening techniques for certain of the important physiological characteristics. (author)

  2. A Hybrid Multiple Criteria Decision Making Model for Supplier Selection

    Directory of Open Access Journals (Sweden)

    Chung-Min Wu

    2013-01-01

    Full Text Available The sustainable supplier selection would be the vital part in the management of a sustainable supply chain. In this study, a hybrid multiple criteria decision making (MCDM model is applied to select optimal supplier. The fuzzy Delphi method, which can lead to better criteria selection, is used to modify criteria. Considering the interdependence among the selection criteria, analytic network process (ANP is then used to obtain their weights. To avoid calculation and additional pairwise comparisons of ANP, a technique for order preference by similarity to ideal solution (TOPSIS is used to rank the alternatives. The use of a combination of the fuzzy Delphi method, ANP, and TOPSIS, proposing an MCDM model for supplier selection, and applying these to a real case are the unique features of this study.

  3. Selection criteria for a radiography programme in South Africa ...

    African Journals Online (AJOL)

    Background: Selection criteria used to admit students to a radiography programme at the Central University of Technology (CUT) included academic criteria, as well as the General Scholastic Aptitude Test (GSAT) and Self-directed Search (SDS) Questionnaire. Aims and objectives: The aim of the study was to identify which ...

  4. Criteria for the selection of PEC primary circuit structural material

    International Nuclear Information System (INIS)

    Antoni, R.; Brunori, G.; Maesa, S.; Scibona, G.; Tomassetti, G.

    1977-01-01

    The choice of the structural materials is generally a compromise between the project requirements, the characteristics (mechanical and environmental) of the materials and the available technology to construct the various parts of the components. The criteria of selection of structural materials for the primary circuit of fast reactor are reported. The criteria concern both general and utilization aspects

  5. 48 CFR 536.602-1 - Selection criteria.

    Science.gov (United States)

    2010-10-01

    ... area of the project and knowledge of locality of the project” as one of several selection criteria. (1... services (based on the total contract price) will be accomplished within the geographical boundaries...

  6. Criteria for selecting organ donors and recipients.

    Science.gov (United States)

    Michielsen, P

    1990-11-01

    As there is a world-wide shortage of organs for transplantation, the selection of the patients is more defined by the availability of transplantable organs than by the medical condition of the potential recipient. This shortage of cadaveric organs is mainly responsible for the use of living donors. With HLA identical sibling donors the results are better than with cadaveric organs, but the ethical problems are usually underestimated. For the parent-to-child donation, the HLA compatibility is less than what could be achieved with well-matched cadaveric donors. The use of genetically unrelated donors is unacceptable from the ethical as well as from the medical point of view. The short- and long-term risk of donation has been insufficiently documented. The experience with the introduction of an opting-out legislation in Belgium in 1987 demonstrates that the shortage of cadaveric organs can be overcome. Harmonization of the legislation is, however, necessary so as to achieve comparable organ retrieval rates between countries participating in organ-exchange organisations.

  7. 49 CFR 268.17 - Project selection criteria.

    Science.gov (United States)

    2010-10-01

    ... criteria will govern FRA's selection of projects to receive funding under the Maglev Deployment Program. (a... are to be expected in the United States. (4) The degree to which the project will augment a Maglev... development status of the Maglev technology selected by the applicant for the project. (c) Benefits for the...

  8. Criteria of benchmark selection for efficient flexible multibody system formalisms

    Directory of Open Access Journals (Sweden)

    Valášek M.

    2007-10-01

    Full Text Available The paper deals with the selection process of benchmarks for testing and comparing efficient flexible multibody formalisms. The existing benchmarks are briefly summarized. The purposes for benchmark selection are investigated. The result of this analysis is the formulation of the criteria of benchmark selection for flexible multibody formalisms. Based on them the initial set of suitable benchmarks is described. Besides that the evaluation measures are revised and extended.

  9. Selecting an E-(Text)Book: Evaluation Criteria

    Science.gov (United States)

    Marczak, Mariusz

    2013-01-01

    This paper aims to propose a repository of pre-use evaluation criteria for language teachers who wish to introduce e-books or e-textbooks to their own teaching practices. By selectively using a set of such criteria, they will be able to evaluate to what extent a given e-book/e-textbook lends itself to utilisation within their own teaching context.…

  10. The Criteria for the Selection of Wells for Hydraulic Fracturing

    Directory of Open Access Journals (Sweden)

    O.V. Salimov

    2017-12-01

    Full Text Available Various methods of selection of wells for hydraulic fracturing are analyzed. It is established that all methods can be divided into three large groups: criteria in the table form of boundary values of parameters, statistical methods of pattern recognition, methods of engineering calculation. The complication or use of additional parameters only leads to a reduction in the number of wells at which hydraulic fracturing is possible. It is shown that the use of reservoir properties of rocks, which are already used by hydraulic fracturing simulators, is not practicable as selection criteria. It is required to include in the selection criteria only those additional factors on which the effectiveness of hydraulic fracturing depends directly.

  11. Selection Criteria in Regime Switching Conditional Volatility Models

    Directory of Open Access Journals (Sweden)

    Thomas Chuffart

    2015-05-01

    Full Text Available A large number of nonlinear conditional heteroskedastic models have been proposed in the literature. Model selection is crucial to any statistical data analysis. In this article, we investigate whether the most commonly used selection criteria lead to choice of the right specification in a regime switching framework. We focus on two types of models: the Logistic Smooth Transition GARCH and the Markov-Switching GARCH models. Simulation experiments reveal that information criteria and loss functions can lead to misspecification ; BIC sometimes indicates the wrong regime switching framework. Depending on the Data Generating Process used in the experiments, great care is needed when choosing a criterion.

  12. Description of double-shell tank selection criteria for inspection

    International Nuclear Information System (INIS)

    Schwenk, E.B.; Scott, K.V.

    1996-01-01

    Technical criteria for selecting double-shelf tanks's (DST's) for inspection are presented. Inspection of DST's is planned to non-destructively determine the general condition of their inner wall and bottom knuckle. Inspection of representative tanks will provide a basis for evaluating the integrity of all the DST's and provide a basis for estimating remaining life. The selection criteria recommended are tank age based on date-of-first fluid entry, waste temperature, corrosion inhibitor levels, deviations from normal behavior - involving sludge levels, hydrogen release and waste transfers - least waste depth fluctuation, tank steel type, other chemical species that could activate stress-corrosion cracking, and waste types

  13. Antibacterial Titanium Produced Using Selective Laser Melting

    Science.gov (United States)

    Macpherson, Andrew; Li, Xiaopeng; McCormick, Paul; Ren, Ling; Yang, Ke; Sercombe, Timothy B.

    2017-12-01

    Titanium and titanium alloys used in current medical and dental applications do not possess antibacterial properties, and therefore, postoperative infection remains a significant risk. Recently, the addition of silver and copper to conventional biomaterials has been shown to produce a material with good antibacterial properties. In this article, we investigate selective laser melting as a method of producing antibacterial Ti-6Al-4V containing elemental additions of Cu or Ag. The addition of Ag had no effect on the microstructure or strength, but it did result in a 300% increase in the ductility of the alloy. In contrast, the addition of Cu resulted in an increase in strength but in a decrease in ductility, along with a change in the structure of the material. The Cu-containing alloy also showed moderate antibacterial properties and was superior to the Ag-containing alloy.

  14. Considering Interactions among Multiple Criteria for the Server Selection

    Directory of Open Access Journals (Sweden)

    Vesna Čančer

    2010-06-01

    Full Text Available Decision-making about server selection is one of the multi-criteria decision-making (MCDM processes where interactions among criteria should be considered. The paper introduces and develops some solutions for considering interactions among criteria in the MCDM problems. In the frame procedure for MCDM by using the group of methods, based on assigning weights, special attention is given to the synthesis of the local alternatives’ values into the aggregate values where the mutual preferential independence between two criteria is not assumed. Firstly, we delineate how to complete the additive model into the multiplicative one with synergic and redundancy elements in the case that criteria are structured in one level and in two levels. Furthermore, we adapted the concept of the fuzzy Choquet integral to the multi-attribute value theory. Studying and comparing the results of the example case of the server selection obtained by both aggregation approaches, the paper highlights the advantages of the first one since it does not require from decision makers to determine the weights of all possible combinations of the criteria and it enables the further use of the most preferred MCDM methods.

  15. 45 CFR 1232.11 - Employment and volunteer selection criteria.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Employment and volunteer selection criteria. 1232.11 Section 1232.11 Public Welfare Regulations Relating to Public Welfare (Continued) CORPORATION FOR... that impair sensory, manual, or speaking skills. ...

  16. Alternative microbial methods: An overview and selection criteria.

    NARCIS (Netherlands)

    Jasson, V.; Jacxsens, L.; Luning, P.A.; Rajkovic, A.; Uyttendaele, M.

    2010-01-01

    This study provides an overview and criteria for the selection of a method, other than the reference method, for microbial analysis of foods. In a first part an overview of the general characteristics of rapid methods available, both for enumeration and detection, is given with reference to relevant

  17. Examination of Students' Selection Criteria for International Education

    Science.gov (United States)

    Ahmad, Syed Zamberi; Buchanan, F. Robert; Ahmad, Norita

    2016-01-01

    Purpose: Motivations for study abroad in tourism and hospitality were examined as to the influence of a variety of personal criteria in the individual decision process of adult learners to select a host country and host institution of study. The paper aims to discuss this issue. Design/methodology/approach: Push-pull factors (Mazzarol and Soutar,…

  18. Myth 6: Cosmetic Use of Multiple Selection Criteria

    Science.gov (United States)

    Friedman-Nimz, Reva

    2009-01-01

    Twenty-five years ago, armed with the courage of her convictions and a respectable collection of empirical evidence, the author articulated what she considered to be a compelling argument against the cosmetic use of multiple selection criteria as a guiding principle for identifying children and youth with high potential. To assess the current…

  19. 40 CFR 228.6 - Specific criteria for site selection.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Specific criteria for site selection. 228.6 Section 228.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN..., nursery, feeding, or passage areas of living resources in adult or -juvenile phases; (3) Location in...

  20. Technical Evaluation Report 27: Educational Wikis: Features and selection criteria

    Directory of Open Access Journals (Sweden)

    Jim Rudolph

    2004-04-01

    Full Text Available This report discusses the educational uses of the ‘wiki,’ an increasingly popular approach to online community development. Wikis are defined and compared with ‘blogging’ methods; characteristics of major wiki engines are described; and wiki features and selection criteria are examined.

  1. Analysis of Criteria Influencing Contractor Selection Using TOPSIS Method

    Science.gov (United States)

    Alptekin, Orkun; Alptekin, Nesrin

    2017-10-01

    Selection of the most suitable contractor is an important process in public construction projects. This process is a major decision which may influence the progress and success of a construction project. Improper selection of contractors may lead to problems such as bad quality of work and delay in project duration. Especially in the construction projects of public buildings, the proper choice of contractor is beneficial to the public institution. Public procurement processes have different characteristics in respect to dissimilarities in political, social and economic features of every country. In Turkey, Turkish Public Procurement Law PPL 4734 is the main regulatory law for the procurement of the public buildings. According to the PPL 4734, public construction administrators have to contract with the lowest bidder who has the minimum requirements according to the criteria in prequalification process. Public administrators are not sufficient for selection of the proper contractor because of the restrictive provisions of the PPL 4734. The lowest bid method does not enable public construction administrators to select the most qualified contractor and they have realised the fact that the selection of a contractor based on lowest bid alone is inadequate and may lead to the failure of the project in terms of time delay Eand poor quality standards. In order to evaluate the overall efficiency of a project, it is necessary to identify selection criteria. This study aims to focus on identify importance of other criteria besides lowest bid criterion in contractor selection process of PPL 4734. In this study, a survey was conducted to staff of Department of Construction Works of Eskisehir Osmangazi University. According to TOPSIS (Technique for Order Preference by Similarity to the Ideal Solution) for analysis results, termination of construction work in previous tenders is the most important criterion of 12 determined criteria. The lowest bid criterion is ranked in rank 5.

  2. Selection criteria of residents for residency programs in Kuwait.

    Science.gov (United States)

    Marwan, Yousef; Ayed, Adel

    2013-01-19

    In Kuwait, 21 residency training programs were offered in the year 2011; however, no data is available regarding the criteria of selecting residents for these programs. This study aims to provide information about the importance of these criteria. A self-administered questionnaire was used to collect data from members (e.g. chairmen, directors, assistants …etc.) of residency programs in Kuwait. A total of 108 members were invited to participate. They were asked to rate the importance level (scale from 1 to 5) of criteria that may affect the acceptance of an applicant to their residency programs. Average scores were calculated for each criterion. Of the 108 members invited to participate, only 12 (11.1%) declined to participate. Interview performance was ranked as the most important criteria for selecting residents (average score: 4.63/5.00), followed by grade point average (average score: 3.78/5.00) and honors during medical school (average score: 3.67/5.00). On the other hand, receiving disciplinary action during medical school and failure in a required clerkship were considered as the most concerning among other criteria used to reject applicants (average scores: 3.83/5.00 and 3.54/5.00 respectively). Minor differences regarding the importance level of each criterion were noted across different programs. This study provided general information about the criteria that are used to accept/reject applicants to residency programs in Kuwait. Future studies should be conducted to investigate each criterion individually, and to assess if these criteria are related to residents' success during their training.

  3. Alternative microbial methods: An overview and selection criteria.

    Science.gov (United States)

    Jasson, Vicky; Jacxsens, Liesbeth; Luning, Pieternel; Rajkovic, Andreja; Uyttendaele, Mieke

    2010-09-01

    This study provides an overview and criteria for the selection of a method, other than the reference method, for microbial analysis of foods. In a first part an overview of the general characteristics of rapid methods available, both for enumeration and detection, is given with reference to relevant bibliography. Perspectives on future development and the potential of the rapid method for routine application in food diagnostics are discussed. As various alternative "rapid" methods in different formats are available on the market, it can be very difficult for a food business operator or for a control authority to select the most appropriate method which fits its purpose. Validation of a method by a third party, according to international accepted protocol based upon ISO 16140, may increase the confidence in the performance of a method. A list of at the moment validated methods for enumeration of both utility indicators (aerobic plate count) and hygiene indicators (Enterobacteriaceae, Escherichia coli, coagulase positive Staphylococcus) as well as for detection of the four major pathogens (Salmonella spp., Listeria monocytogenes, E. coli O157 and Campylobacter spp.) is included with reference to relevant websites to check for updates. In a second part of this study, selection criteria are introduced to underpin the choice of the appropriate method(s) for a defined application. The selection criteria link the definition of the context in which the user of the method functions - and thus the prospective use of the microbial test results - with the technical information on the method and its operational requirements and sustainability. The selection criteria can help the end user of the method to obtain a systematic insight into all relevant factors to be taken into account for selection of a method for microbial analysis. Copyright 2010 Elsevier Ltd. All rights reserved.

  4. Polymers for enhanced oil recovery: fundamentals and selection criteria.

    Science.gov (United States)

    Rellegadla, Sandeep; Prajapat, Ganshyam; Agrawal, Akhil

    2017-06-01

    With a rising population, the demand for energy has increased over the years. As per the projections, both fossil fuel and renewables will remain as major energy source (678 quadrillion BTU) till 2030 with fossil fuel contributing 78% of total energy consumption. Hence, attempts are continuously made to make fossil fuel production more sustainable and cheaper. From the past 40 years, polymer flooding has been carried out in marginal oil fields and have proved to be successful in many cases. The common expectation from polymer flooding is to obtain 50% ultimate recovery with 15 to 20% incremental recovery over secondary water flooding. Both naturally derived polymers like xanthan gum and synthetic polymers like partially hydrolyzed polyacrylamide (HPAM) have been used for this purpose. Earlier laboratory and field trials revealed that salinity and temperature are the major issues with the synthetic polymers that lead to polymer degradation and adsorption on the rock surface. Microbial degradation and concentration are major issues with naturally derived polymers leading to loss of viscosity and pore throat plugging. Earlier studies also revealed that polymer flooding is successful in the fields where oil viscosity is quite higher (up to 126 cp) than injection water due to improvement in mobility ratio during polymer flooding. The largest successful polymer flood was reported in China in 1990 where both synthetic and naturally derived polymers were used in nearly 20 projects. The implementation of these projects provides valuable suggestions for further improving the available processes in future. This paper examines the selection criteria of polymer, field characteristics that support polymer floods and recommendation to design a large producing polymer flooding.

  5. IMRT QA: Selecting gamma criteria based on error detection sensitivity

    Energy Technology Data Exchange (ETDEWEB)

    Steers, Jennifer M. [Department of Radiation Oncology, Cedars-Sinai Medical Center, Los Angeles, California 90048 and Physics and Biology in Medicine IDP, David Geffen School of Medicine, University of California, Los Angeles, Los Angeles, California 90095 (United States); Fraass, Benedick A., E-mail: benedick.fraass@cshs.org [Department of Radiation Oncology, Cedars-Sinai Medical Center, Los Angeles, California 90048 (United States)

    2016-04-15

    Purpose: The gamma comparison is widely used to evaluate the agreement between measurements and treatment planning system calculations in patient-specific intensity modulated radiation therapy (IMRT) quality assurance (QA). However, recent publications have raised concerns about the lack of sensitivity when employing commonly used gamma criteria. Understanding the actual sensitivity of a wide range of different gamma criteria may allow the definition of more meaningful gamma criteria and tolerance limits in IMRT QA. We present a method that allows the quantitative determination of gamma criteria sensitivity to induced errors which can be applied to any unique combination of device, delivery technique, and software utilized in a specific clinic. Methods: A total of 21 DMLC IMRT QA measurements (ArcCHECK®, Sun Nuclear) were compared to QA plan calculations with induced errors. Three scenarios were studied: MU errors, multi-leaf collimator (MLC) errors, and the sensitivity of the gamma comparison to changes in penumbra width. Gamma comparisons were performed between measurements and error-induced calculations using a wide range of gamma criteria, resulting in a total of over 20 000 gamma comparisons. Gamma passing rates for each error class and case were graphed against error magnitude to create error curves in order to represent the range of missed errors in routine IMRT QA using 36 different gamma criteria. Results: This study demonstrates that systematic errors and case-specific errors can be detected by the error curve analysis. Depending on the location of the error curve peak (e.g., not centered about zero), 3%/3 mm threshold = 10% at 90% pixels passing may miss errors as large as 15% MU errors and ±1 cm random MLC errors for some cases. As the dose threshold parameter was increased for a given %Diff/distance-to-agreement (DTA) setting, error sensitivity was increased by up to a factor of two for select cases. This increased sensitivity with increasing dose

  6. Does Residency Selection Criteria Predict Performance in Orthopaedic Surgery Residency?

    Science.gov (United States)

    Raman, Tina; Alrabaa, Rami George; Sood, Amit; Maloof, Paul; Benevenia, Joseph; Berberian, Wayne

    2016-04-01

    More than 1000 candidates applied for orthopaedic residency positions in 2014, and the competition is intense; approximately one-third of the candidates failed to secure a position in the match. However, the criteria used in the selection process often are subjective and studies have differed in terms of which criteria predict either objective measures or subjective ratings of resident performance by faculty. Do preresidency selection factors serve as predictors of success in residency? Specifically, we asked which preresidency selection factors are associated or correlated with (1) objective measures of resident knowledge and performance; and (2) subjective ratings by faculty. Charts of 60 orthopaedic residents from our institution were reviewed. Preresidency selection criteria examined included United States Medical Licensing Examination (USMLE) Step 1 and Step 2 scores, Medical College Admission Test (MCAT) scores, number of clinical clerkship honors, number of letters of recommendation, number of away rotations, Alpha Omega Alpha (AOA) honor medical society membership, fourth-year subinternship at our institution, and number of publications. Resident performance was assessed using objective measures including American Board of Orthopaedic Surgery (ABOS) Part I scores and Orthopaedics In-Training Exam (OITE) scores and subjective ratings by faculty including global evaluation scores and faculty rankings of residents. We tested associations between preresidency criteria and the subsequent objective and subjective metrics using linear correlation analysis and Mann-Whitney tests when appropriate. Objective measures of resident performance namely, ABOS Part I scores, had a moderate linear correlation with the USMLE Step 2 scores (r = 0.55, p communication skills" subsection of the global evaluations. We found that USMLE Step 2, number of honors in medical school clerkships, and AOA membership demonstrated the strongest correlations with resident performance. Our

  7. Evaluation of selection criteria for graduate students in radiation therapy.

    Science.gov (United States)

    Schneider-Kolsky, Michal; Wright, Caroline; Baird, Marilyn

    2006-12-01

    Selection of suitable students into graduate medical and specialist health professional courses can be difficult. Historically, selection of students was primarily based on prior academic performance. Recently, however, more emphasis has been placed on considering broader academic backgrounds and personal characteristics and attitudes of students, but no reliable measurement tool is available to predict student success and satisfaction with their choice of profession. The aim of this study was to survey practising radiation therapists in Australia to seek their opinions regarding suitable selection criteria for graduate entry radiation therapy (RT) students in order to optimize selection procedures for future applicants. Four hundred questionnaires were sent to nine RT centres in three states within Australia. All nine clinics participated in the survey and 189 questionnaires were returned. Results show that the majority of radiation therapists place a high level of importance upon a sound knowledge of physics and mathematics, as well as life experience, and agree that a visit to an RT clinic plus an interview comprise important components of the selection process. Humanities, psychology and a psychometric test were not viewed as essential entry requirements. Experienced radiation therapists placed less value on academic performance in the primary degree and were more likely to include an interview as a selection criterion than junior practitioners. Empathy for patients was identified as the most important personal attribute. It is thus recommended that not only cognitive but also personal skills be evaluated during the selection of prospective radiation therapists.

  8. The selection criteria elements of X-ray optics system

    Science.gov (United States)

    Plotnikova, I. V.; Chicherina, N. V.; Bays, S. S.; Bildanov, R. G.; Stary, O.

    2018-01-01

    At the design of new modifications of x-ray tomography there are difficulties in the right choice of elements of X-ray optical system. Now this problem is solved by practical consideration, selection of values of the corresponding parameters - tension on an x-ray tube taking into account the thickness and type of the studied material. For reduction of time and labor input of design it is necessary to create the criteria of the choice, to determine key parameters and characteristics of elements. In the article two main elements of X-ray optical system - an x-ray tube and the detector of x-ray radiation - are considered. Criteria of the choice of elements, their key characteristics, the main dependences of parameters, quality indicators and also recommendations according to the choice of elements of x-ray systems are received.

  9. FSAW for REIT selection in multi-criteria decision making

    Science.gov (United States)

    Adawiyah, C. W. Rabiatul; Abdullah, Lazim

    2014-07-01

    Real Estate Investment Trust (REIT) is profitable investments that gain Malaysian investors' attention. It can be a great way to increase our net worth. Due to the existence of many property trusts, investors face difficulties in determining the best property trusts to invest their wealth. This high risk investment makes investors cautious in choosing the platform for investing their wealth. In real world situation, the data collected are inexact and ambiguous. Investment reminds investors to beware because it carries risk no matter low or high. There are lots of things that investors need to consider before invest in any property or trust. The aim of this paper is to identify the best criteria of REIT and determine the best property trust that helps investors gain profits in their investment. Four experts in areas of investment are randomly selected to assess and provide information regarding to Malaysia's REITs. Decision makers were asked to rate the criteria for every alternatives by using the linguistic variables. The five linguistic variables were used as input data to test fuzzy simple additive weighting (FSAW) model. From the study conducted, transparency indicates the necessary criteria for each property trust. This decision making model used to be possible to test FSAW model in investment sector. The decision makers also asked to evaluate the alternatives based on the linguistic ranking variables to rank the alternatives and the result shows the best alternative in this case is Amanah Harta Tanah PNB. The ranking signifies the impact of the criterion and alternatives to investors especially REITs investors.

  10. Airbreathing engine selection criteria for SSTO propulsion system

    Science.gov (United States)

    Ohkami, Yoshiaki; Maita, Masataka

    1995-02-01

    This paper presents airbreathing engine selection criteria to be applied to the propulsion system of a Single Stage To Orbit (SSTO). To establish the criteria, a relation among three major parameters, i.e., delta-V capability, weight penalty, and effective specific impulse of the engine subsystem, is derived as compared to these parameters of the LH2/LOX rocket engine. The effective specific impulse is a function of the engine I(sub sp) and vehicle thrust-to-drag ratio which is approximated by a function of the vehicle velocity. The weight penalty includes the engine dry weight, cooling subsystem weight. The delta-V capability is defined by the velocity region starting from the minimum operating velocity up to the maximum velocity. The vehicle feasibility is investigated in terms of the structural and propellant weights, which requires an iteration process adjusting the system parameters. The system parameters are computed by iteration based on the Newton-Raphson method. It has been concluded that performance in the higher velocity region is extremely important so that the airbreathing engines are required to operate beyond the velocity equivalent to the rocket engine exhaust velocity (approximately 4500 m/s).

  11. Geological Storage of CO2. Site Selection Criteria

    International Nuclear Information System (INIS)

    Ruiz, C.; Martinez, R.; Recreo, F.; Prado, P.; Campos, R.; Pelayo, M.; Losa, A. de la; Hurtado, A.; Lomba, L.; Perez del Villar, L.; Ortiz, G.; Sastre, J.; Zapatero, M. A.; Suarez, I.; Arenillas, A.

    2007-01-01

    In year 2002 the Spanish Parliament unanimously passed the ratification of the Kyoto Protocol, signed December 1997, compromising to limiting the greenhouse gas emissions increase. Later on, the Environment Ministry submitted the Spanish National Assignment Emissions Plan to the European Union and in year 2005 the Spanish Greenhouse Gas market started working, establishing taxes to pay in case of exceeding the assigned emissions limits. So, the avoided emissions of CO2 have now an economic value that is promoting new anthropogenic CO2 emissions reduction technologies. Carbon Capture and Storage (CCS) are among these new technological developments for mitigating or eliminate climate change. CO2 can be stored in geological formations such as depleted oil or gas fields, deep permeable saline water saturated formations and unmailable coal seams, among others. This report seeks to establish the selection criteria for suitable geological formations for CO2 storage in the Spanish national territory, paying attention to both the operational and performance requirements of these storage systems. The report presents the physical and chemical properties and performance of CO2 under storage conditions, the transport and reaction processes of both supercritical and gaseous CO2, and CO2 trapping mechanisms in geological formations. The main part of the report is devoted to geological criteria at watershed, site and formation scales. (Author) 100 refs

  12. Geological Storage of CO2. Site Selection Criteria

    International Nuclear Information System (INIS)

    Ruiz, C.; Martinez, R.; Recreo, F.; Prado, P.; Campos, R.; Pelayo, M.; Losa, A. de la; Hurtado, A.; Lomba, L.; Perez del Villar, L.; Ortiz, G.; Sastre, J.

    2006-01-01

    In year 2002 the Spanish Parliament unanimously passed the ratification of the Kyoto Protocol, signed December 1997, compromising to limiting the greenhouse gas emissions increase. Later on, the Environment Ministry submitted the Spanish National Assignment Emissions Plan to the European Union and in year 2005 the Spanish Greenhouse Gas market started working, establishing taxes to pay in case of exceeding the assigned emissions limits. So, the avoided emissions of CO2 have now an economic value that is promoting new anthropogenic CO2 emissions reduction technologies. Carbon Capture and Storage (CCS) are among these new technological developments for mitigating or eliminate climate change. CO2 can be stored in geological formations such as depleted oil or gas fields, deep permeable saline water saturated formations and unmineable coal seams, among others. This report seeks to establish the selection criteria for suitable geological formations for CO2 storage in the Spanish national territory, paying attention to both the operational and performance requirements of these storage systems. The report presents the physical and chemical properties and performance of CO2 under storage conditions, the transport and reaction processes of both supercritical and gaseous CO2, and CO2 trapping mechanisms in geological formations. The main part of the report is devoted to geological criteria at watershed, site and formation scales. (Author) 100 ref

  13. IT OUTSOURCING: METHODOLOGY FOR SUPPLIER SELECTION CRITERIA FOR COMPETITIVE ADVANTAGE

    Directory of Open Access Journals (Sweden)

    Sergio Alexandre Simões

    2012-04-01

    Full Text Available Abstract: Two criteria are usually adopted to select the provider of IT: lower prices or better service qualification of the supplier. This article proposes a strategic approach: the company should hire the provider that best leverage their competitive advantages. This approach implied the need to develop a methodology. To support it, the authors analyzed four models, Porter, RBV (Resource-Based View, Balanced Scorecard and the Weapons and Field Competition. Preferred the latter to be the most complete, qualiquantitative technique and able to accurately align the goals of the IT service firm's to competitive contracting strategy. The methodology was developed and applied to an insurance company and in face of the excellent results, decided to write this article to disclose it.

  14. Multi-data integration of exploration criteria and selection of prospecting targets

    International Nuclear Information System (INIS)

    Dechang, L.; Jingke, Z.; Maorong, S.; Guojuan, W.

    1991-01-01

    In this paper based on the analysis of the exploration criteria for Shengyuan Basin-a uranium ore field, the multi-data integration and information extraction of exploration criteria are carried out on computer and image processing system so that the areas with best combinations of exploration criteria are directly displayed on the screen. Six prospecting targets are selected through the field examination. Shengyuan basin in Jiangxi province is a uranium-producing, Jurassic Cretaceous volcanic-sedimentary basin with an area of about 400 sq km. Its basement consists of Sinian-Cambrian rocks with Caledonian granites intruded. Several uranium deposits, occurrences and anomalies were discovered over the basin region which, therefore, becomes a very important uranium ore field in China

  15. Selection criteria for oxidation method in total organic carbon measurement.

    Science.gov (United States)

    Yoon, GeunSeok; Park, Sang-Min; Yang, Heuiwon; Tsang, Daniel C W; Alessi, Daniel S; Baek, Kitae

    2018-05-01

    During the measurement of total organic carbon (TOC), dissolved organic carbon is converted into CO 2 by using high temperature combustion (HTC) or wet chemical oxidation (WCO). However, the criteria for selecting the oxidation methods are not clear. In this study, the chemical structures of organic material were considered as a key factor to select the oxidation method used. Most non-degradable organic compounds showed a similar oxidation efficiency in both methods, including natural organic compounds, dyes, and pharmaceuticals, and thus both methods are appropriate to measure TOC in waters containing these compounds. However, only a fraction of the carbon in the halogenated compounds (perfluorooctanoic acid and trifluoroacetic acid) were oxidized using WCO, resulting in measured TOC values that are considerably lower than those determined by HTC. This result is likely due to the electronegativity of halogen elements which inhibits the approach of electron-rich sulfate radicals in the WCO, and the higher bond strength of carbon-halogen pairs as compared to carbon-hydrogen bonds, which results in a lower degree of oxidation of the compounds. Our results indicate that WCO could be used to oxidize most organic compounds, but may not be appropriate to quantify TOC in organic carbon pools that contain certain halogenated compounds. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. Identification of multi-criteria for supplier selection in IT project outsourcing

    Science.gov (United States)

    Fusiripong, Prashaya; Baharom, Fauziah; Yusof, Yuhanis

    2017-10-01

    In the increasing global business competitiveness, most organizations have attempted to determine the suitable external parties to support their core and non-core competency, particularly, in IT project outsourcing. The IT supplier selection is required to apply multi-criteria which comprised tangible criteria and intangible criteria in consider optimal IT supplier. Most researches attempted to identify optimal criteria for selecting IT supplier, however, the criteria cannot be the considered common criteria support the variety of IT outsourcing. Therefore, the study aimed to identify a common set of criteria being used in the various types of IT outsourcing. The common criteria are constructed by multi-criteria and success criteria, which were collected by literature review with comprehensive and comparative approach. Consequently, the researchers are able to identify a common set of criteria adopted in the variety of selection problem IT outsourcing supplier.

  17. Characteristics of Criteria for Selecting Investment Projects under Uncertainty

    Directory of Open Access Journals (Sweden)

    Adrian ENCIU

    2011-07-01

    Full Text Available Within financial theory and practice, there are used five main criteria for selecting investment projects: the net present value (NPV criterion, the internal rate of return (IRR criterion, the return term (RT criterion, the profitability ratio (PR criterion and the supplementary return (SR criterion. The assay will emphasize several new properties of said indexes for investment assessment, having as starting point the hypotheses of (approximately normal repartition of cash-flows generated by an investment project. The obtained results point to the fact that the NPV indexes (the analysis of this criterion was carried out in the article “The NPV Criterion for Valuing Investments under Uncertainty”, Daniel Armeanu, Leonard Lache, Economic Computation and Economic Cybernetics Studies and Research no. 4/2009, pp. 133-143, IRR, PR, RT and SR register normal repartitions, therefore simplifying the investment analysis under economic uncertainty, by the capacity of building confidence intervals and assessing probabilities for the inferior limits of said investment assessment indexes.

  18. 34 CFR 607.21 - What are the selection criteria for planning grants?

    Science.gov (United States)

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What are the selection criteria for planning grants... the Secretary Make an Award? § 607.21 What are the selection criteria for planning grants? The Secretary evaluates an application for a planning grant on the basis of the criteria in this section. (a...

  19. 34 CFR 606.21 - What are the selection criteria for planning grants?

    Science.gov (United States)

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What are the selection criteria for planning grants... PROGRAM How Does the Secretary Make an Award? § 606.21 What are the selection criteria for planning grants? The Secretary evaluates an application for a planning grant on the basis of the criteria in this...

  20. Criteria for Selecting Optimal Nitrogen Fertilizer Rates for Precision Agriculture

    Directory of Open Access Journals (Sweden)

    Francesco Basso

    2011-02-01

    Full Text Available Yield rates vary spatially and maps produced by the yield monitor systems are evidence of the degree of withinfield variability. The magnitude of this variability is a good indication of the suitability of implementing a spatially variable management plan. Crop simulation models have the potential to integrate the effects of temporal and multiple stress interaction on crop growth under different environmental and management conditions. The strength of these models is their ability to account for stress by simulating the temporal interaction of stress on plant growth each day during the season. The objective of paper is to present a procedure that allows for the selection of optimal nitrogen fertilizer rates to be applied spatially on previously identified management zones through crop simulation modelling. The integration of yield maps, remote sensing imagery, ground truth measurements, electrical resistivity imaging allowed for the identifications of three distinct management zones based on their ability to produce yield and their stability over time (Basso et al., 2009. After validating the model, we simulated 7 N rates from 0 to 180 kg N/ha with a 30 kg N/ha increment. The model results illustrate the different N responses for each of the zone. The analysis allowed us to identify the optimal N rate for each of the zone based on agronomic, economic and environmental sustainability of N management.

  1. Criteria for Selecting Optimal Nitrogen Fertilizer Rates for Precision Agriculture

    Directory of Open Access Journals (Sweden)

    Bruno Basso

    Full Text Available Yield rates vary spatially and maps produced by the yield monitor systems are evidence of the degree of withinfield variability. The magnitude of this variability is a good indication of the suitability of implementing a spatially variable management plan. Crop simulation models have the potential to integrate the effects of temporal and multiple stress interaction on crop growth under different environmental and management conditions. The strength of these models is their ability to account for stress by simulating the temporal interaction of stress on plant growth each day during the season. The objective of paper is to present a procedure that allows for the selection of optimal nitrogen fertilizer rates to be applied spatially on previously identified management zones through crop simulation modelling. The integration of yield maps, remote sensing imagery, ground truth measurements, electrical resistivity imaging allowed for the identifications of three distinct management zones based on their ability to produce yield and their stability over time (Basso et al., 2009. After validating the model, we simulated 7 N rates from 0 to 180 kg N/ha with a 30 kg N/ha increment. The model results illustrate the different N responses for each of the zone. The analysis allowed us to identify the optimal N rate for each of the zone based on agronomic, economic and environmental sustainability of N management.

  2. Criteria for Selecting Optimal Nitrogen Fertilizer Rates for Precision Agriculture

    Directory of Open Access Journals (Sweden)

    Bruno Basso

    2009-12-01

    Full Text Available Yield rates vary spatially and maps produced by the yield monitor systems are evidence of the degree of withinfield variability. The magnitude of this variability is a good indication of the suitability of implementing a spatially variable management plan. Crop simulation models have the potential to integrate the effects of temporal and multiple stress interaction on crop growth under different environmental and management conditions. The strength of these models is their ability to account for stress by simulating the temporal interaction of stress on plant growth each day during the season. The objective of paper is to present a procedure that allows for the selection of optimal nitrogen fertilizer rates to be applied spatially on previously identified management zones through crop simulation modelling. The integration of yield maps, remote sensing imagery, ground truth measurements, electrical resistivity imaging allowed for the identifications of three distinct management zones based on their ability to produce yield and their stability over time (Basso et al., 2009. After validating the model, we simulated 7 N rates from 0 to 180 kg N/ha with a 30 kg N/ha increment. The model results illustrate the different N responses for each of the zone. The analysis allowed us to identify the optimal N rate for each of the zone based on agronomic, economic and environmental sustainability of N management.

  3. Selection of bioaccumulation criteria for environmental emergency (E2) planning

    International Nuclear Information System (INIS)

    Ketcheson, K.; Hradecky, K.; Gagne, M.; St-Amant-Verret, M.

    2006-01-01

    Environment Canada's Environmental Emergency regulations require the evaluation of a substance by a Risk Evaluation Framework (REF). Bioaccumulation criteria are used within the environmental hazard ratings section of the REF to determine the risk of a substance to organisms and are obtained from 3 types of measurements depending on data reliability: (1) bioaccumulation factors (BAF); (2) bioconcentration factors (BCF); and (3) an octanol-water partition coefficient (log K ow ). This paper presented details of a study of international and regional bioaccumulation criteria conducted to aid in determining appropriate criteria for E2 regulations and plans, with specific reference to substances toxic to aquatic organisms. An E2 plan is required if a substance has a bioconcentration factor of more than 500 in conjunction with aquatic toxicity. Bioaccumulation criteria from several sources for 745 substances were obtained to aid in choosing the most important parameters. Various international and regional criteria were examined and corresponding sources were summarized, and different source criteria was compared with empirical chemical data. The criteria chosen included both log K ow values and BCF values, although it was suggested that BCF and BAF are more realistic measures of bioaccumulation than log K ow , as they are derived from animal studies. The chosen values agreed with the virtual elimination criteria set out by the Canadian Environmental Protection Act (CEPA) 1999 as well as United States Environmental Protection Agency (EPA) criteria. It was concluded that the bioaccumulation criteria for E2 planning will help Environment Canada ensure the protection of the environment from hazardous substances. 11 refs., 3 tabs., 5 figs

  4. Multi-Criteria Decision Making For Determining A Simple Model of Supplier Selection

    Science.gov (United States)

    Harwati

    2017-06-01

    Supplier selection is a decision with many criteria. Supplier selection model usually involves more than five main criteria and more than 10 sub-criteria. In fact many model includes more than 20 criteria. Too many criteria involved in supplier selection models sometimes make it difficult to apply in many companies. This research focuses on designing supplier selection that easy and simple to be applied in the company. Analytical Hierarchy Process (AHP) is used to weighting criteria. The analysis results there are four criteria that are easy and simple can be used to select suppliers: Price (weight 0.4) shipment (weight 0.3), quality (weight 0.2) and services (weight 0.1). A real case simulation shows that simple model provides the same decision with a more complex model.

  5. MULTIPLE CRITERIA DECISION MAKING APPROACH FOR INDUSTRIAL ENGINEER SELECTION USING FUZZY AHP-FUZZY TOPSIS

    OpenAIRE

    Deliktaş, Derya; ÜSTÜN, Özden

    2018-01-01

    In this study, a fuzzy multiple criteria decision-making approach is proposed to select an industrial engineer among ten candidates in a manufacturing environment. The industrial engineer selection problem is a special case of the personal selection problem. This problem, which has hierarchical structure of criteria and many decision makers, contains many criteria. The evaluation process of decision makers also includes ambiguous parameters. The fuzzy AHP is used to determin...

  6. Methods for producing thin film charge selective transport layers

    Science.gov (United States)

    Hammond, Scott Ryan; Olson, Dana C.; van Hest, Marinus Franciscus Antonius Maria

    2018-01-02

    Methods for producing thin film charge selective transport layers are provided. In one embodiment, a method for forming a thin film charge selective transport layer comprises: providing a precursor solution comprising a metal containing reactive precursor material dissolved into a complexing solvent; depositing the precursor solution onto a surface of a substrate to form a film; and forming a charge selective transport layer on the substrate by annealing the film.

  7. Looking for Improvement in Last Planner System: Defining Selection Criteria

    DEFF Research Database (Denmark)

    Lindhard, Søren; Wandahl, Søren

    2013-01-01

    criteria was carried out. Six flows are identified as relevant: workforce, material, and machinery which comprise the needed resources and safety, climate conditions, and space which affect the pace of the work. Because of the importance to progress in the workflow, and the on-schedule completeness...

  8. Selection of response criteria for clinical trials of sarcoma treatment.

    Science.gov (United States)

    Schuetze, Scott M; Baker, Laurence H; Benjamin, Robert S; Canetta, Renzo

    2008-01-01

    Soft tissue sarcomas are a heterogeneous group of malignancies arising from mesenchymal tissues. A large number of new therapies are being evaluated in patients with sarcomas, and consensus criteria defining treatment responses are essential for comparison of results from studies completed by different research groups. The 1979 World Health Organization (WHO) handbook set forth operationally defined criteria for response evaluation in solid tumors that were updated in 2000 with the publication of the Response Evaluation Criteria in Solid Tumors (RECIST). There have been significant advances in tumor imaging, however, that are not reflected in the RECIST. For example, computed tomography (CT) slice thickness has been reduced from 10 mm to < or =2.5 mm, allowing for more reproducible and accurate measurement of smaller lesions. Combination of imaging techniques, such as positron emission tomography with fluorine-18-fluorodeoxyglucose (18FDG-PET) and CT can provide investigators and clinicians with both anatomical and functional information regarding tumors, and there is now a large body of evidence demonstrating the effectiveness of PET/CT and other newer imaging methods for the detection and staging of tumors as well as early determination of responses to therapy. The application of newer imaging methods has the potential to decrease both the sample sizes required for, and duration of, clinical trials by providing an early indication of therapeutic response that is well correlated with clinical outcomes, such as time to tumor progression or overall survival. The results summarized in this review support the conclusion that the RECIST and the WHO criteria for evaluation of response in solid tumors need to be modernized. In addition, there is a current need for prospective trials to compare new response criteria with established endpoints and to validate imaging-based response rates as surrogate endpoints for clinical trials of new agents for sarcoma and other solid

  9. Criteria for Selecting a Monolingual Dictionary for Learners

    OpenAIRE

    Colin, Rogers

    2003-01-01

    There are a bewildering number of monolingual dictionaries on the market in Japan, including new learner dictionaries which give students a great deal of potentially useful information about how to use words. However it is essential to carefully evaluate dictionaries to ensure that they meet the needs of the learners who will use them. This article sets out some criteria to help make such decisions.

  10. High-consequence analysis, evaluation, and application of select criteria

    International Nuclear Information System (INIS)

    Gutmanis, I.; Jaksch, J.A.

    1984-01-01

    A number of characteristics distinguish environmental risk from pollution problems. The characteristics make environmental risk problems harder to manage through existing regulatory, legal, and economic institutions. Hence, technologies involving environmental risk impose on society extremely difficult collective decisions. This paper is concerned with the process of reaching social decisions that involve low-probability, high-consequence outcomes. It is divided into five major parts. Part I contains the introduction. Part II reviews the two main classes of criteria that have been proposed for social decisions: approaches based on market mechanisms and their extension, and approaches associated with Rawls and Buchanan, which not only focus on outcomes, but also impose a set of minimal constraints on the process for reaching decisions and social consensus. Part III proposes a set of eight criteria for evaluating social decision processes. In Parts IV and V we investigate applying the criteria to two case studies -- one on nuclear waste disposal and the other on transportation of liquefied natural gas

  11. Supplier selection criteria and methods: past, present and future

    OpenAIRE

    MUKHERJEE, KRISHNENDU

    2014-01-01

    Sole purpose of supplier selection is not limited to get supply at low cost and at right time. Supplier selection is a strategic decision to fulfil company’s goal for long period of time at low risk. To accomplish this objective companies are moving from reactive buying to proactive buying to give more priority to co-creation of wealth with supplier/s. Considering this issue an attempt has been made in this paper to give systematic review of supplier selection and evaluation process from 2005...

  12. Feature Selection Criteria for Real Time EKF-SLAM Algorithm

    Directory of Open Access Journals (Sweden)

    Fernando Auat Cheein

    2010-02-01

    Full Text Available This paper presents a seletion procedure for environmet features for the correction stage of a SLAM (Simultaneous Localization and Mapping algorithm based on an Extended Kalman Filter (EKF. This approach decreases the computational time of the correction stage which allows for real and constant-time implementations of the SLAM. The selection procedure consists in chosing the features the SLAM system state covariance is more sensible to. The entire system is implemented on a mobile robot equipped with a range sensor laser. The features extracted from the environment correspond to lines and corners. Experimental results of the real time SLAM algorithm and an analysis of the processing-time consumed by the SLAM with the feature selection procedure proposed are shown. A comparison between the feature selection approach proposed and the classical sequential EKF-SLAM along with an entropy feature selection approach is also performed.

  13. South African medical schools: Current state of selection criteria and ...

    African Journals Online (AJOL)

    Selection of medical students at South African (SA) medical schools must promote ... groups, while ensuring optimal student throughput and success, and training future ... In keeping = with international practices, a variety of academic and ...

  14. Selection of tolerable risk criteria for dam safety decision making

    International Nuclear Information System (INIS)

    Nielsen, N.M.; Hartford, D.N.D.; MacDonald, T.F.

    1994-01-01

    Risk assessment has received increasing attention in recent years as a means of aiding decision making on dams by providing systematic and rational methods for dealing with risk and uncertainty. Risk assessment is controversial and decisions affecting risk to life are the most controversial. Tolerable criteria, based on the risks that society is prepared to accept in order to avoid excessive costs, set bounds within which risk-based decisions may be made. The components of risk associated with dam safety are addressed on an individual basis and criteria established for each component, thereby permitting flexibility in the balance between component risk and avoiding the problems of placing a monetary value on life. The guiding principle of individual risk is that dams do not impose intolerable risks on any individual. A risk to life of 1 in 10 4 per annum is generally considered the maximum tolerable risk. When considering societal risk, the safety of a dam should be proportional to the consequences of its failure. Risks of financial losses beyond the corporation's ability to finance should be so low as to be considered negligible. 17 refs., 3 figs

  15. Formulation of criteria for pollution control on cement products produced from solid wastes in China.

    Science.gov (United States)

    Yang, Yufei; Huang, Qifei; Yang, Yu; Huang, Zechun; Wang, Qi

    2011-08-01

    The process of producing cement products from solid waste can increase the level of pollutants in the cement products. Therefore, it is very important to establish a pollution control standard for cement products to protect the environment and human health. This paper presents acceptance limits for the availability of heavy metals in cement products which have been produced from solid wastes and explains how the limits have been calculated. The approach and method used to formulate these criteria were based on EN 12920. The typical exposure scenarios used in this paper involve concrete being used for drinking water supply pipelines and concrete pavements and are based on an analysis of typical applications of cement in China, and the potential for contact with water. The parameters of a tank test which was based on NEN 7375 were set in accordance with the environmental conditions of typical scenarios in China. Mechanisms controlling the release of heavy metals in concrete and a model for that release were obtained using the leaching test. Finally, based on acceptance criteria for drinking water and groundwater quality in China, limit values for the availability of heavy metals in concrete were calculated. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Identification and evaluation of influential criteria for the selection of an environmental shipping carrier using DEMATEL

    DEFF Research Database (Denmark)

    Jia, Peng; Govindan, Kannan; Kannan, Devika

    2015-01-01

    The current environmental pollution is a major factor in economic development and vehicle pollution is ranked next to industrial emissions in total emissions worldwide. This study focuses on the selection of a suitable shipping carrier from an economic and environmental perspective. In practice......, there are many criteria's available to select a suitable shipping container. But, shipping container companies are struggling to identify the most influential criteria to select a shipping container as it requires in-depth analysis. So, the objective of this paper is to analyse the criteria and identify the most...... influential criteria from an environmental practices perspective. In this study, seventeen factors are identified from literature aimed at locating the most influential criteria to select a suitable shipping carrier using the decision making trial and evaluation laboratory (DEMATEL). This procedure helps...

  17. Safety approach to the selection of design criteria for the CRBRP reactor refueling system

    International Nuclear Information System (INIS)

    Meisl, C.J.; Berg, G.E.; Sharkey, N.F.

    1979-01-01

    The selection of safety design criteria for Liquid Metal Fast Breeder Reactor (LMFBR) refueling systems required the extrapolation of regulations and guidelines intended for Light Water Reactor refueling systems and was encumbered by the lack of benefit from a commercially licensed predecessor other than Fermi. The overall approach and underlying logic are described for developing safety design criteria for the reactor refueling system (RRS) of the Clinch River Breeder Reactor Plant (CRBRP). The complete selection process used to establish the criteria is presented, from the definition of safety functions to the finalization of safety design criteria in the appropriate documents. The process steps are illustrated by examples

  18. The strategic selecting criteria and performance by using the multiple criteria method

    Directory of Open Access Journals (Sweden)

    Lisa Y. Chen

    2008-02-01

    Full Text Available As the increasing competitive intensity in the current service market, organizational capabilities have been recognized as the importance of sustaining competitive advantage. The profitable growth for the firms has been fueled a need to systematically assess and renew the organization. The purpose of this study is to analyze the financial performance of the firms to create an effective evaluating structure for the Taiwan's service industry. This study utilized TOPSIS (technique for order preference by similarity to ideal solution method to evaluate the operating performance of 12 companies. TOPSIS is a multiple criteria decision making method to identify solutions from a finite set of alternatives based upon simultaneous minimization of distance from an ideal point and maximization of distance from a nadir point. By using this approach, this study measures the financial performance of firms through two aspects and ten indicators. The result indicated e-life had outstanding performance among the 12 retailers. The findings of this study provided managers to better understand their market position, competition, and profitability for future strategic planning and operational management.

  19. Criteria for Selecting Suitable Infectious Diseases for Phage Therapy.

    Science.gov (United States)

    Harper, David R

    2018-04-05

    One of the main issues with phage therapy from its earliest days has been the selection of appropriate disease targets. In early work, when the nature of bacteriophages was unknown, many inappropriate targets were selected, including some now known to have no bacterial involvement whatsoever. More recently, with greatly increased understanding of the highly specific nature of bacteriophages and of their mechanisms of action, it has been possible to select indications with an increased chance of a successful therapeutic outcome. The factors to be considered include the characteristics of the infection to be treated, the characteristics of the bacteria involved, and the characteristics of the bacteriophages themselves. At a later stage all of this information then informs trial design and regulatory considerations. Where the work is undertaken towards the development of a commercial product it is also necessary to consider the planned market, protection of intellectual property, and the sourcing of funding to support the work. It is clear that bacteriophages are not a "magic bullet". However, with careful and appropriate selection of a limited set of initial targets, it should be possible to obtain proof of concept for the many elements required for the success of phage therapy. In time, success with these initial targets could then support more widespread use.

  20. Criteria for Selecting Suitable Infectious Diseases for Phage Therapy

    Directory of Open Access Journals (Sweden)

    David R. Harper

    2018-04-01

    Full Text Available One of the main issues with phage therapy from its earliest days has been the selection of appropriate disease targets. In early work, when the nature of bacteriophages was unknown, many inappropriate targets were selected, including some now known to have no bacterial involvement whatsoever. More recently, with greatly increased understanding of the highly specific nature of bacteriophages and of their mechanisms of action, it has been possible to select indications with an increased chance of a successful therapeutic outcome. The factors to be considered include the characteristics of the infection to be treated, the characteristics of the bacteria involved, and the characteristics of the bacteriophages themselves. At a later stage all of this information then informs trial design and regulatory considerations. Where the work is undertaken towards the development of a commercial product it is also necessary to consider the planned market, protection of intellectual property, and the sourcing of funding to support the work. It is clear that bacteriophages are not a “magic bullet”. However, with careful and appropriate selection of a limited set of initial targets, it should be possible to obtain proof of concept for the many elements required for the success of phage therapy. In time, success with these initial targets could then support more widespread use.

  1. 36 CFR 72.50 - Grant selection criteria.

    Science.gov (United States)

    2010-07-01

    ... effective means of delivering a recreation service that can serve as a model for other communities. (2....50 Section 72.50 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR URBAN PARK AND RECREATION RECOVERY ACT OF 1978 Grant Selection, Approval and Administration § 72...

  2. Selection criteria for forested natural areas in New England, USA

    Science.gov (United States)

    William B. Leak; Mariko Yamasaki; Marie-Louise Smith; David T. Funk

    1994-01-01

    The selection of forested natural areas for research and educational purposes is discussed. Five factors are important: sufficient size; representation of typical communities and sites; documented disturbance histories; acceptable current condition in terms of age, tree size, and successional stage; and administrative feasibility.

  3. PEAK SHIFTS PRODUCED BY CORRELATED RESPONSE TO SELECTION.

    Science.gov (United States)

    Price, Trevor; Turelli, Michael; Slatkin, Montgomery

    1993-02-01

    Traits may evolve both as a consequence of direct selection and also as a correlated response to selection on other traits. While correlated response may be important for both the production of evolutionary novelty and in the build-up of complex characters, its potential role in peak shifts has been neglected empirically and theoretically. We use a quantitative genetic model to investigate the conditions under which a character, Y, which has two alternative optima, can be dragged from one optimum to the other as a correlated response to selection on a second character, X. High genetic correlations between the two characters make the transition, or peak shift, easier, as does weak selection tending to restore Y to the optimum from which it is being dragged. When selection on Y is very weak, the conditions for a peak shift depend only on the location of the new optimum for X and are independent of the strength of selection moving it there. Thus, if the "adaptive valley" for Y is very shallow, little reduction in mean fitness is needed to produce a shift. If the selection acts strongly to keep Y at its current optimum, very intense directional selection on X, associated with a dramatic drop in mean fitness, is required for a peak shift. When strong selection is required, the conditions for peak shifts driven by correlated response might occur rarely, but still with sufficient frequency on a geological timescale to be evolutionarily important. © 1993 The Society for the Study of Evolution.

  4. Selection criteria for the best secondary water chemistry

    International Nuclear Information System (INIS)

    Nordmann, F.; Fiquet, J.M.

    1996-01-01

    This paper describes, for PWR plants, the approach for selecting the best chemistry-pH, amine, corrosion inhibitors-according to the secondary system characteristics, such as presence or not of copper alloys, steam generator tubing alloy, tube support plate design, sludge pile importance. The impact of condensate polisher, sludge lancing, chemical cleaning, as well as other ways of eliminating undesirable compounds or mitigating them are also discussed. For plants with simultaneous presence of carbon steel and copper alloys, alternate amines like morpholine, or new reagents such as ethanolamine (ETA), can be selected to manage erosion-corrosion of carbon steel and decrease corrosion transport, at a pH acceptable for copper alloys (9.2 at 25 C). In more recent units, with an all ferrous system, a high pH operation, with only hydrazine addition, the easiest way, or with combined hydrazine and morpholine or ETA will be of some benefit against steam generator corrosion. When Alloy 600 has been selected, inhibitors such as boric acid, or maybe titanium oxide or cerium in the future, needs to be added in steam generators in order to decrease intergranular corrosion progression. In addition, caustic and lead contaminations must be strictly avoided, while sludge and deposits will be eliminated by lancing and chemical cleaning, if necessary. (orig.)

  5. Capability of multiple selection criteria to evaluate contrasting spring wheat germplasms under arid conditions

    International Nuclear Information System (INIS)

    Al-Suhaibani, N. A.; SALAH, E.; El-Hendawy, S. E.; Al-Gaadi, K.; Rehman, S. U.

    2015-01-01

    Selection criteria that would evaluate a large number of germplasm in a rapid and non-destructive manner would be considered advantageous in plant breeding programs. Trade-off between traditional and non-destructive screening criteria in evaluating 90 wheat accessions under water shortage was tested using multivariate statistical techniques. Only three irrigations during the growing cycle of germplasm were applied with the amount of water totalling 2550 m /sup 3/ ha /sup -1/. Sequential path analysis identified one traditional trait (grain weight per plant) and two non-destructive traits (leaf area index and stomatal conductance) as important first-order traits that influenced final grain yield. The three traits, taken together, explained 96.8 percentage of the total variation in grain yield. Total dry weight per plant, green leaf area per plant, harvest index, grain number per plant, leaf water content and canopy temperature were identified as important second-order traits that influenced grain yield. Although canopy temperature was ranked as a second-order trait, it explained 64.4 percentage of the total variation in stomatal conductance. Approximately 78.0 percentage of the total variation in grain weight or leaf area index was explained by the leaf water content (66.2 percentage) and total dry weight (11.5 percentage). The 90 examined spring wheat germplasms were grouped into five clusters based on all agro-physiological traits using the centroid linkage method. The tested wheat germplasm that produce high grain yield under water shortage were characterised by good performance of certain rapid, easy and non-destructive physiological traits such as high leaf area index, high stomatal conductance and low canopy temperature. Therefore, these three traits could be used in combination as quick and easy screening criteria to select suitable genotypes for water-limiting conditions. (author)

  6. The Ideal Criteria of Supplier Selection for SMEs Food Processing Industry

    Directory of Open Access Journals (Sweden)

    Ramlan Rohaizan

    2016-01-01

    Full Text Available Selection of good supplier is important to determine the performance and profitability of SMEs food processing industry. The lack of managerial capability on supplier selection in SMEs food processing industry affects the competitiveness of SMEs food processing industry. This research aims to determine the ideal criteria of supplier for food processing industry using Analytical Hierarchy Process (AHP. The research was carried out in a quantitative method by distributing questionnaires to 50 SMEs food processing industries. The collected data analysed using Expert Choice software to rank the supplier selection criteria. The result shows that criteria for supplier selection are ranked by cost, quality, service, delivery and management and organisation while purchase cost, audit result, defect analysis, transportation cost and fast responsiveness are the first five sub-criteria. The result of this research intends to improve managerial capabilities of SMEs food processing industry in supplier selection.

  7. Determination of Effective Criteria for Location Selection of Kiln Wood Drying Plants by AHP Technique

    Directory of Open Access Journals (Sweden)

    Rahim Mohebbi

    2011-12-01

    Full Text Available This study was aimed at determining the effective criteria for location selection of wood drying plants in Iran. For this purpose, after review and field visit of the industries, 35 key indicators were identified. These criteria were divided into five major groups as: materials, infrastructure, technical, economical and instructional indices. The priority rates of these criteria and sub-criteria were evaluated by AHP technique. The results indicated that among 35 effective sub-criteria in location selection of the plants, the sub-criteria of quality of raw materials(0.152, purchasing raw materials, land cost, profitability, reliability of supply, and sales had the highest priorities, which were rated as 0.118, 0.105, 0.067, 0.061 and 0.057, respectively

  8. Food selection criteria for disaster response planning in urban societies.

    Science.gov (United States)

    Wien, Michelle; Sabaté, Joan

    2015-05-12

    Nutrition professionals that have menu planning and disaster management responsibilities should consider factors that have transcended from ancient to current times, in addition to recognizing societal trends that have led to our current increased vulnerability in the event of a disaster. Hence, we proceeded to develop a set of "Disaster Response Diets" (DRDs) for use in urban societies inclusive of the aforementioned considerations. A three-phase multidimensional approach was used to identify food groups suitable for creating a set of DRDs. Phase One consisted of calculating the percent daily nutrient intake and Drewnowski's naturally nutrient rich (NNR) score for an individual or mean composite for one serving of food from 11 specific food groups. In Phase Two, in addition to nutrient density, the 11 food groups were evaluated and scored based on the following DRD planning criteria: storage and handling properties, preparation ease and, cultural acceptance/individual tolerance. During Phase Three, three DRDs were developed based upon the data retrieved from Phases one and two. In Phase One, the NNR scores ranged from 2.1 for fresh fruits to 28.1 for dry cereals, a higher score indicating a higher nutrient density. During Phase Two, a maximum score of 12 was possible based on appropriateness for a disaster situation. Five plant-based food groups (dry cereals, nuts, dried fruits, grains and legumes) achieved a score ranging between 7 and 12, whereas the five fresh food groups were deemed ineligible due to sanitation and perishability concerns. During Phase Three, three DRDs (milk-inclusive, milk-free and Grab-and-Go) were developed as benchmarks for disaster response planning. Plant-based DRDs are universally acceptable and tolerated across cultures and religions. Therefore, we suggest nutrition professionals consider using a plant-based approach for creating DRDs for public health institutions and organizations.

  9. Dynamic Educational e-Content Selection Using Multiple Criteria in Web-Based Personalized Learning Environments.

    Science.gov (United States)

    Manouselis, Nikos; Sampson, Demetrios

    This paper focuses on the way a multi-criteria decision making methodology is applied in the case of agent-based selection of offered learning objects. The problem of selection is modeled as a decision making one, with the decision variables being the learner model and the learning objects' educational description. In this way, selection of…

  10. An Examination of Program Selection Criteria for Part-Time MBA Students

    Science.gov (United States)

    Colburn, Michael; Fox, Daniel E.; Westerfelt, Debra Kay

    2011-01-01

    Prospective graduate students select a graduate program as a result of a multifaceted decision-making process. This study examines the selection criteria that part-time MBA students used in selecting a program at a private university. Further, it analyzes the methods by which the students first learned of the MBA program. The authors posed the…

  11. Criteria for the selection of radionuclides for tumor radioimmunotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, S.C.; Mausner, L.F.; Mease, R.C.

    1991-01-01

    The potential of utilizing monoclonal antibodies as carriers of radionuclides for the selective destruction of tumors (radioimmunotherapy, RIT) has stimulated much research activity. From dosimetric and other considerations, the choice of radiolabel is an important factor that needs to be optimized for maximum effectiveness of RIT. This paper reviews and assesses a number of present and future radionuclides that are particularly suitable for RIT based on the various physical, chemical, and biological considerations. Intermediate to high-energy beta emitters' (with and without gamma photons in their emission) are emphasized since they possess a number of advantages over alpha and Auger emitters. Factors relating to the production and availability of candidate radiometals as well as their stable chemical attachment to monoclonal antibodies are discussed. 34 refs., 4 tabs.

  12. Selection Criteria for Improving Yield in Chili (Capsicum annuum

    Directory of Open Access Journals (Sweden)

    S. Chakrabarty

    2017-01-01

    Full Text Available The present investigation was carried out to estimate the genetic variability and character association. Significant differences were observed among the genotypes for all the 15 traits for 20 chili genotypes. The highest genotypic coefficient of variation and phenotypic coefficient of variation were found for ten edible fruit weight, number of fruits per plant, fruit yield per plant, ten dry fruit weight, fruit length, fruit width, and weight of seeds per fruit. High heritability coupled with very high genetic advance as per cent of mean was observed for ten edible fruit weight, ten dry fruit weight, fruit length, number of fruits per plant, and fruit yield per plant. Phenotypic correlation coefficient among different traits indicated that fruit yield per plant at green stage had significant and positive association with ten edible green fruit weight, number of primary branches, harvest duration, and first fruit maturity and significant negative correlation with days to first picking. The path coefficient analysis revealed that days to first picking had the maximum positive direct effect on fruit yield per plant followed by harvest duration, ten edible fruit weight, ten dry fruit weight, hundred-seed weight, number of fruits per plant, first fruit maturity, and number of primary branches. Days to first picking had the maximum positive direct effect but significant negative effect with fruit yield per plant which indicated that the trait should be selected to expunge the undesirable indirect effect in order to make use of the direct effect. Therefore, selection should be practiced for ten edible fruit weight, ten dry fruit weight, number of fruits per plant, harvest duration, and hundred-seed weight for direct improvement of fruit yield per plant.

  13. An analysis of project selection and assignment criteria of Danish tenders in Europe

    Directory of Open Access Journals (Sweden)

    Jasper Kranker Larsen

    2013-12-01

    Full Text Available Public construction agencies are one of the largest developers within the Danish construction industry, where such agencies own and develop new public construction projects. Most of these projects are put out in European tender. This study analyses the selection and assignment criteria employed by these agencies in different types of public sector projects. Some of the objectives pursued by the study include the determination of 1/ the selection and assignment criteria mostly used in Danish public tenders 2/ how different types of projects use selection and assignment criteria in the bidding process, and 3/ any significant difference between the use of selection and assignment criteria in Danish public construction projects. The study uses a quantitative research approach where 157 Danish public tender cases were selected from the European Tenders Electronic Daily database between the period: January 2010 to March 2013. Fisher's Exact Test was conducted to determine if there was any significant use of some selection and assignment criteria. The findings of the study showed that invited tenders with pre-qualification and lowest price in 69.8% of the tenders are the most used selection and assignment criteria, with little regard to project type.

  14. 77 FR 5243 - Proposed Priority, Requirements, Definitions, and Selection Criteria-Arts in Education National...

    Science.gov (United States)

    2012-02-02

    ...-quality arts education and arts integration activities and services in music, dance, theater, media arts... DEPARTMENT OF EDUCATION Proposed Priority, Requirements, Definitions, and Selection Criteria--Arts in Education National Program (AENP) AGENCY: Office of Innovation and Improvement, Department of...

  15. A multi-criteria analysis approach for ranking and selection of microorganisms for the production of oils for biodiesel production.

    Science.gov (United States)

    Ahmad, Farah B; Zhang, Zhanying; Doherty, William O S; O'Hara, Ian M

    2015-08-01

    Oleaginous microorganisms have potential to be used to produce oils as alternative feedstock for biodiesel production. Microalgae (Chlorella protothecoides and Chlorella zofingiensis), yeasts (Cryptococcus albidus and Rhodotorula mucilaginosa), and fungi (Aspergillus oryzae and Mucor plumbeus) were investigated for their ability to produce oil from glucose, xylose and glycerol. Multi-criteria analysis (MCA) using analytic hierarchy process (AHP) and preference ranking organization method for the enrichment of evaluations (PROMETHEE) with graphical analysis for interactive aid (GAIA), was used to rank and select the preferred microorganisms for oil production for biodiesel application. This was based on a number of criteria viz., oil concentration, content, production rate and yield, substrate consumption rate, fatty acids composition, biomass harvesting and nutrient costs. PROMETHEE selected A. oryzae, M. plumbeus and R. mucilaginosa as the most prospective species for oil production. However, further analysis by GAIA Webs identified A. oryzae and M. plumbeus as the best performing microorganisms. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Selection of tannase-producing Aspergillus niger strains

    OpenAIRE

    Pinto,Gustavo A.S.; Leite,Selma G.F.; Terzi,Selma C.; Couri,Sonia

    2001-01-01

    The aim of this work was to select strains of Aspergillus niger for tannase production. Growth of colonies in plates with tannic acid-containing medium indicated their ability to synthesize tannase. Tannase activity was also measured in solid-state fermentation. A. niger 11T25A5 was the best tannase producer (67.5 U.g-1/72 hours of fermentation).

  17. The selection criteria for Slovenian bibliography: with special emphasis on the articles

    Directory of Open Access Journals (Sweden)

    Marjeta Šušteričič

    2010-01-01

    Full Text Available Selection principles are an important stage in the creation of a national bibliography.The article outlines the selection of the national output to be included in Slovenian bibliography. It also presents theoretical basis for selection in general, with the emphasis on international guidelines and on the development of national principles and professional outlines. Statistical data and examples give more detailed analysis of selection criteria of articles regarding different types of serial publications. Results of the study show that selection criteria for Slovenian bibliography are to be constantly verified due to the dynamics of the national publishing industry. Nevertheless, the main features of selection criteria remain unchanged: lasting value of subject matter with the emphasis on scientific research and expert knowledge.

  18. Comparing selection criteria of residency directors and physicians' employers.

    Science.gov (United States)

    Villanueva, A M; Kaye, D; Abdelhak, S S; Morahan, P S

    1995-04-01

    In 1993, the Medical College of Pennsylvania (MCP), mindful of the rapidly changing environments of health care delivery, created three surveys to gather information from outside the school that would help the faculty plan how the curriculum and advising system could better prepare students and residents for the demands of twenty-first-century medicine. The first survey focused on the MCP seniors graduating that year and asked about their perceptions of their medical education and their specialty and residency choices. The second survey, directed to 40 medical residency program directors in family medicine, internal medicine, pediatrics, and surgery, sought to identify the characteristics of applicants that these directors valued when selecting entrants to their programs. The third survey, of 30 employers of physicians representing four practice environments (private practice, hospitals/other health systems, academic medical centers, and health maintenance organizations), sought information on hiring and recruitment practices and the skills, competencies, and attitudes these employers valued most when hiring recently graduated physicians. The responses showed several differences and/or misperceptions among the views held by the three groups surveyed and suggest that medical educators have not adapted as rapidly as have employers to changes in the health care environment. Academic health centers must broaden their missions and make changes in their own institutional cultures, both to maintain their own viability and to train physicians who have the balance between scientific and technical competency and essential personal characteristics (such as empathy) that the next century's practice will probably demand.

  19. Selection criteria for wastewater treatment technologies to protect drinking water.

    Science.gov (United States)

    von Sperling, M

    2000-01-01

    The protection of water bodies used as sources for drinking water is intimately linked to the adoption of adequate technologies for the treatment of the wastewater generated in the catchment area. The paper presents a general overview of the main technologies used for the treatment of domestic sewage, with a special emphasis on developing countries, and focussing on the main parameters of interest, such as BOD, coliforms and nutrients. A series of tables, figures and charts that can be used for the preliminary selection of treatment technologies is presented. The systems analysed are: stabilisation ponds, activated sludge, trickling filters, anaerobic systems and land disposal. Within each system, the main process variants are covered. Two summary tables are presented, one for quantitative analysis, including easily usable information based on per capita values (US$/cap, Watts/cap, m2 area/cap, m3 sludge/cap), and another for a qualitative comparison among the technologies, based on a one-to-five-star scoring system. The recent trend in tropical countries in the use of UASB (Upflow Anaerobic Sludge Blanket) reactors is also discussed.

  20. 25 CFR 1001.8 - Selection criteria for tribes/consortia to receive a negotiation grant.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Selection criteria for tribes/consortia to receive a negotiation grant. 1001.8 Section 1001.8 Indians OFFICE OF THE ASSISTANT SECRETARY, INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR SELF-GOVERNANCE PROGRAM § 1001.8 Selection criteria for tribes/consortia to receive a negotiation grant. (a) Who may be...

  1. Comparison of Optimal Portfolios Selected by Multicriterial Model Using Absolute and Relative Criteria Values

    Directory of Open Access Journals (Sweden)

    Branka Marasović

    2009-03-01

    Full Text Available In this paper we select an optimal portfolio on the Croatian capital market by using the multicriterial programming. In accordance with the modern portfolio theory maximisation of returns at minimal risk should be the investment goal of any successful investor. However, contrary to the expectations of the modern portfolio theory, the tests carried out on a number of financial markets reveal the existence of other indicators important in portfolio selection. Considering the importance of variables other than return and risk, selection of the optimal portfolio becomes a multicriterial problem which should be solved by using the appropriate techniques.In order to select an optimal portfolio, absolute values of criteria, like return, risk, price to earning value ratio (P/E, price to book value ratio (P/B and price to sale value ratio (P/S are included in our multicriterial model. However the problem might occur as the mean values of some criteria are significantly different for different sectors and because financial managers emphasize that comparison of the same criteria for different sectors could lead us to wrong conclusions. In the second part of the paper, relative values of previously stated criteria (in relation to mean value of sector are included in model for selecting optimal portfolio. Furthermore, the paper shows that if relative values of criteria are included in multicriterial model for selecting optimal portfolio, return in subsequent period is considerably higher than if absolute values of the same criteria were used.

  2. QUANTITY DISCOUNTS IN SUPPLIER SELECTION PROBLEM BY USE OF FUZZY MULTI-CRITERIA PROGRAMMING

    Directory of Open Access Journals (Sweden)

    Tunjo Perić

    2011-02-01

    Full Text Available Supplier selection in supply chain is a multi-criteria problem that involves a number of quantitative and qualitative factors. This paper deals with a concrete problem of flour purchase by a company that manufactures bakery products and the purchasing price of flour depends on the quantity ordered. The criteria for supplier selection and quantities supplied by individual suppliers are: purchase costs, product quality and reliability of suppliers. The problem is solved using a model that combines revised weighting method and fuzzy multi-criteria linear programming (FMCLP. The paper highlights the efficiency of the proposed methodology in conditions when purchasing prices depend on order quantities.

  3. Site selection criteria for the shallow land burial of low-level radioactive waste

    International Nuclear Information System (INIS)

    Falconer, K.L.; Hull, L.C.; Mizell, S.A.

    The shallow land burial of low-level waste must be accomplished in a manner that ensures the public and biosphere are protected from harmful amounts of radiation. This can be attained by selecting, designing, operating and closing sites such that contaminants never leave the site boundary in levels above regulatory limits. Site design, operation and closure are all functions of the characteristics of the site selected. As a result, the site selection process offers the most effective means for optimizing safe, efficient and economical low-level waste burial practices. The purpose of this document is to set forth criteria for the selection of shallow land burial sites. Criteria are standard rules, by which the ability of a site to meet waste management goals can be judged. They are comprehensive, universal, and qualitative and are applicable in any geologic environment. Site selection criteria provide the framework for the siting process

  4. Selection of Forklift Unit for Warehouse Operation by Applying Multi-Criteria Analysis

    Directory of Open Access Journals (Sweden)

    Predrag Atanasković

    2013-07-01

    Full Text Available This paper presents research related to the choice of the criteria that can be used to perform an optimal selection of the forklift unit for warehouse operation. The analysis has been done with the aim of exploring the requirements and defining relevant criteria that are important when investment decision is made for forklift procurement, and based on the conducted research by applying multi-criteria analysis, to determine the appropriate parameters and their relative weights that form the input data and database for selection of the optimal handling unit. This paper presents an example of choosing the optimal forklift based on the selected criteria for the purpose of making the relevant investment decision.

  5. To Make Good Decision: A Group DSS for Multiple Criteria Alternative Rank and Selection

    Directory of Open Access Journals (Sweden)

    Chen-Shu Wang

    2015-01-01

    Full Text Available Decision making is a recursive process and usually involves multiple decision criteria. However, such multiple criteria decision making may have a problem in which partial decision criteria may conflict with each other. An information technology, such as the decision support system (DSS and group DSS (GDSS, emerges to assist decision maker for decision-making process. Both the DSS and GDSS should integrate with a symmetrical approach to assist decision maker to take all decision criteria into consideration simultaneously. This study proposes a GDSS architecture named hybrid decision-making support model (HDMSM and integrated four decision approaches (Delphi, DEMATEL, ANP, and MDS to help decision maker to rank and select appropriate alternatives. The HDMSM consists of five steps, namely, criteria identification, criteria correlation calculation, criteria evaluation, critical criteria selection, and alternative rank and comparison. Finally, to validate the proposed feasibility of the proposed model, this study also conducts a case study to find out the important indexes of corporate social responsibility (CSR from multiple perspectives. As the case study demonstrates the proposed HDMSM enables a group of decision makers to implement the MCDM effectively and help them to analyze the relation and degree of mutual influence among different evaluation factors.

  6. Engineering study of generic site criteria for selected DOE plutonium facilities

    International Nuclear Information System (INIS)

    Kingsbury, R.J.; Greenwood, J.M.; Sandoval, M.D.

    1980-09-01

    The objectives of this study were to identify criteria that would be applied to selection of a site for plutonium facilities such as those at the Rocky Flats Plant, to establish the relative importance of these criteria, and to identify suitable areas within the United States for location of plutonium facilities with respect to these criteria. Sources of the site criteria identified include federal laws, federal agency regulations, state laws and regulations, and requirements associated with operations to be performed at the site. The criteria identified during the study were organized into 14 major categories. The relative importnace of each category and each criterion within the categories were established using group decision-making techniques. The major criteria categories, their assigned weight on a scale of 1 to 10, and their relative priority ranks are as follows: geology/seismicity; public safety; environmental impact; meteorology; hydrology; topography; transportation; utilities; personnel; safeguards/security; land area and availability; land use compatibility; and, public acceptance. A suitability analysis of the continental United States was performed using only those criteria that could be mapped at a national scale. Suitability was assessed with respect to each of these criteria, and individual suitability maps were prepared. A composite suitability map was generated using computerized overlay techniques. This map provides a starting point for identifying specific candidate sites if an actual site selection were to be conducted

  7. Preliminary selection criteria for the Yucca Mountain Project waste package container material

    International Nuclear Information System (INIS)

    Halsey, W.G.

    1991-01-01

    The Department of Energy's Yucca Mountain Project (YMP) is evaluating a site at Yucca Mountain in Nevada for construction of a geologic repository for the storage of high-level nuclear waste. Lawrence Livermore National Laboratory's (LLNL) Nuclear Waste Management Project (NWMP) has the responsibility for design, testing, and performance analysis of the waste packages. The design is performed in an iterative manner in three sequential phases (conceptual design, advanced conceptual design, and license application design). An important input to the start of the advanced conceptual design is the selection of the material for the waste containers. The container material is referred to as the 'metal barrier' portion of the waste package, and is the responsibility of the Metal Barrier Selection and Testing task at LLNL. The selection will consist of several steps. First, preliminary, material-independent selection criteria will be established based on the performance goals for the container. Second, a variety of engineering materials will be evaluated against these criteria in a screening process to identify candidate materials. Third, information will be obtained on the performance of the candidate materials, and final selection criteria and quantitative weighting factors will be established based on the waste package design requirements. Finally, the candidate materials will be ranked against these criteria to determine whether they meet the mandated performance requirements, and to provide a comparative score to choose the material for advanced conceptual design activities. This document sets forth the preliminary container material selection criteria to be used in screening candidate materials. 5 refs

  8. An analysis of project selection and assignment criteria of danish tenders in europe

    DEFF Research Database (Denmark)

    Larsen, Jesper Kranker; Ussing, Lene Faber; Brunø, Thomas Ditlev

    2013-01-01

    , and 3/ any significant difference between the use of selection and assignment criteria in Danish public construction projects. The study uses a quantitative research approach where 157 Danish public tender cases were selected from the European Tenders Electronic Daily database between the period...

  9. Criteria for selecting implementation science theories and frameworks: results from an international survey

    Directory of Open Access Journals (Sweden)

    Sarah A. Birken

    2017-10-01

    Full Text Available Abstract Background Theories provide a synthesizing architecture for implementation science. The underuse, superficial use, and misuse of theories pose a substantial scientific challenge for implementation science and may relate to challenges in selecting from the many theories in the field. Implementation scientists may benefit from guidance for selecting a theory for a specific study or project. Understanding how implementation scientists select theories will help inform efforts to develop such guidance. Our objective was to identify which theories implementation scientists use, how they use theories, and the criteria used to select theories. Methods We identified initial lists of uses and criteria for selecting implementation theories based on seminal articles and an iterative consensus process. We incorporated these lists into a self-administered survey for completion by self-identified implementation scientists. We recruited potential respondents at the 8th Annual Conference on the Science of Dissemination and Implementation in Health and via several international email lists. We used frequencies and percentages to report results. Results Two hundred twenty-three implementation scientists from 12 countries responded to the survey. They reported using more than 100 different theories spanning several disciplines. Respondents reported using theories primarily to identify implementation determinants, inform data collection, enhance conceptual clarity, and guide implementation planning. Of the 19 criteria presented in the survey, the criteria used by the most respondents to select theory included analytic level (58%, logical consistency/plausibility (56%, empirical support (53%, and description of a change process (54%. The criteria used by the fewest respondents included fecundity (10%, uniqueness (12%, and falsifiability (15%. Conclusions Implementation scientists use a large number of criteria to select theories, but there is little

  10. Criteria for selecting implementation science theories and frameworks: results from an international survey.

    Science.gov (United States)

    Birken, Sarah A; Powell, Byron J; Shea, Christopher M; Haines, Emily R; Alexis Kirk, M; Leeman, Jennifer; Rohweder, Catherine; Damschroder, Laura; Presseau, Justin

    2017-10-30

    Theories provide a synthesizing architecture for implementation science. The underuse, superficial use, and misuse of theories pose a substantial scientific challenge for implementation science and may relate to challenges in selecting from the many theories in the field. Implementation scientists may benefit from guidance for selecting a theory for a specific study or project. Understanding how implementation scientists select theories will help inform efforts to develop such guidance. Our objective was to identify which theories implementation scientists use, how they use theories, and the criteria used to select theories. We identified initial lists of uses and criteria for selecting implementation theories based on seminal articles and an iterative consensus process. We incorporated these lists into a self-administered survey for completion by self-identified implementation scientists. We recruited potential respondents at the 8th Annual Conference on the Science of Dissemination and Implementation in Health and via several international email lists. We used frequencies and percentages to report results. Two hundred twenty-three implementation scientists from 12 countries responded to the survey. They reported using more than 100 different theories spanning several disciplines. Respondents reported using theories primarily to identify implementation determinants, inform data collection, enhance conceptual clarity, and guide implementation planning. Of the 19 criteria presented in the survey, the criteria used by the most respondents to select theory included analytic level (58%), logical consistency/plausibility (56%), empirical support (53%), and description of a change process (54%). The criteria used by the fewest respondents included fecundity (10%), uniqueness (12%), and falsifiability (15%). Implementation scientists use a large number of criteria to select theories, but there is little consensus on which are most important. Our results suggest that the

  11. Danish Public Construction Counselling Selection and Assignment Criteria in European Tendering

    DEFF Research Database (Denmark)

    Larsen, Jesper Kranker; Ussing, Lene Faber; Brunø, Thomas Ditlev

    2014-01-01

    One of the largest customers in the Danish construction industry is public agencies that own and develop projects. For some of the counselling services, they recur to be put out in European tendering. The aim is to find which selection and assignment criteria are used most in public tendering. How...... projects use selection and assignment criteria for counselling services and finally if there is significant use of selection and assignment methods in public counselling. The method is based on 74 public counselling tenders from the European Tenders Electronic Daily database from January 2010 to March 2013...

  12. Lean Information Management: Criteria For Selecting Key Performance Indicators At Shop Floor

    Science.gov (United States)

    Iuga, Maria Virginia; Kifor, Claudiu Vasile; Rosca, Liviu-Ion

    2015-07-01

    Most successful organizations worldwide use key performance indicators as an important part of their corporate strategy in order to forecast, measure and plan their businesses. Performance metrics vary in their purpose, definition and content. Therefore, the way organizations select what they think are the optimal indicators for their businesses varies from company to company, sometimes even from department to department. This study aims to answer the question of what is the most suitable way to define and select key performance indicators. More than that, it identifies the right criteria to select key performance indicators at shop floor level. This paper contributes to prior research by analysing and comparing previously researched selection criteria and proposes an original six-criteria-model, which caters towards choosing the most adequate KPIs. Furthermore, the authors take the research a step further by further steps to closed research gaps within this field of study.

  13. A multi-criteria decision making approach for supplier selection in the flexible packaging industry

    Directory of Open Access Journals (Sweden)

    Cristea Ciprian

    2017-01-01

    Full Text Available The supplier selection problem represents one of the most important components of the supply chain management. This article presents a multiple criteria decision making analysis contributing to the selection of the most convenient supplier in the flexible packaging industry. Due to the fact that in today's supply chain management, the performance of potential suppliers is evaluated against multiple criteria rather than taking into account only the cost factor, the appropriate criteria in the supplier selection have been identified, and the considered variants are assessed, considering the decision maker’s preferences and existing constraints. The variants are ranked in terms of their suitability for selecting a supplier with the use of Electre III method. The results obtained from the simulation experiment suggest that this methodology is a feasible decision support model.

  14. A MOORA based fuzzy multi-criteria decision making approach for supply chain strategy selection

    Directory of Open Access Journals (Sweden)

    Bijan Sarkar

    2012-08-01

    Full Text Available To acquire the competitive advantages in order to survive in the global business scenario, modern companies are now facing the problems of selecting key supply chain strategies. Strategy selection becomes difficult as the number of alternatives and conflicting criteria increases. Multi criteria decision making (MCDM methodologies help the supply chain managers take a lead in a complex industrial set-up. The present investigation applies fuzzy MCDM technique entailing multi-objective optimization on the basis of ratio analysis (MOORA in selection of alternatives in a supply chain. The MOORA method is utilized to three suitable numerical examples for the selection of supply chain strategies (warehouse location selection and vendor/supplier selection. The results obtained by using current approach almost match with those of previous research works published in various open journals. The empirical study has demonstrated the simplicity and applicability of this method as a strategic decision making tool in a supply chain.

  15. Get SET: aligning anatomy demonstrator programmes with Surgical Education and Training selection criteria.

    Science.gov (United States)

    Rhodes, Danielle; Fogg, Quentin A; Lazarus, Michelle D

    2018-05-01

    Prevocational doctors aspiring to surgical careers are commonly recruited as anatomy demonstrators for undergraduate and graduate medical programmes. Entry into Surgical Education and Training (SET) is highly competitive and a unique opportunity exists to align anatomy demonstrator programmes with the selection criteria and core competencies of SET programmes. This study used a qualitative approach to (i) determine what criteria applicants for SET are assessed on and (ii) identify criteria that could be aligned with and enhanced by an anatomy demonstrator programme. The selection guidelines of all nine surgical specialties for the 2017 intake of SET trainees were analysed using qualitative content analysis methodology. The Royal Australasian College of Surgeons adopted a holistic approach to trainee selection that assessed both discipline-specific and discipline-independent skills. Qualitative content analysis identified eight categories of key selection criteria: medical expertise, scholarly activity, professional identity, interpersonal skills, integrity, self-management, insight and self-awareness and community involvement. The structured curriculum vitae was heavily weighted towards discipline-specific skills, such as medical expertise and scholarly activity. Insufficient information was available to determine the weighting of selection criteria assessed by the structured referee reports or interviews. Anatomy demonstrator programmes provide prevocational doctors with unique opportunities to develop surgical skills and competencies in a non-clinical setting. Constructively aligned anatomy demonstrator programmes may be particularly beneficial for prevocational doctors seeking to improve their anatomical knowledge, teaching skills or scholarly activity. © 2017 Royal Australasian College of Surgeons.

  16. Criteria for selecting measures of plant information with application to nuclear reactors

    International Nuclear Information System (INIS)

    Kiguchi, T.; Sheridan, T.B.

    1979-01-01

    Criteria for selecting from alternative measures of plant information have been derived by information theory and the expected-value model of decision theory. Two criteria derived by information theory are minimum ''uncertainty'' of judgement of plant states, and maximum ''surprise'' of human operators. Two criteria derived by decision theory are maximum expected reward to operators, and maximum ratio of the maximum and next-to-maximum expected rewards. These four criteria have been evaluated experimentally in application to human monitoring problems of three ''plants'': an abstract laboratory exercise, a small research reactor, and a conventional nuclear power plant (high-fidelity training simulator). The results show that the criteria derived by decision theory are superior to the others from the viewpoint of correct rate of human subjects' judgement

  17. A Multi-criteria neutrosophic group decision making metod based TOPSIS for supplier selection

    OpenAIRE

    Şahin, Rıdvan; Yiğider, Muhammed

    2014-01-01

    The process of multiple criteria decision making (MCDM) is of determining the best choice among all of the probable alternatives. The problem of supplier selection on which decision maker has usually vague and imprecise knowledge is a typical example of multi criteria group decision-making problem. The conventional crisp techniques has not much effective for solving MCDM problems because of imprecise or fuzziness nature of the linguistic assessments. To find the exact values for MCDM problems...

  18. Criteria definition and approaches in green supplier selection – a case study for raw material and packaging of food industry

    OpenAIRE

    Narges Banaeian; Hossein Mobli; Izabela Ewa Nielsen; Mahmoud Omid

    2015-01-01

    This paper formulates an integrated framework for deciding about the green supplier selection criteria in food supply chain and also proposes different methods that account for single and multiple sourcing of supplier selection. Green supplier selection relies on green criteria, so determination of suitable set of criteria will affect decision-maker results directly. In this research, an operational model including combination of general and environmental criteria is introduced for green supp...

  19. The Important Selection Criteria in Choosing Islamic Banks: A Survey in Bahrain

    Directory of Open Access Journals (Sweden)

    Abdullah Hamzah Al-Hadrami

    2017-05-01

    Full Text Available Selection criteria of banks in general and Islamic banks in particular have been given high attention by the marketing researchers nowadays. But this kind of research is still insufficient in numbers especially in the developing countries. Therefore, this study aims to identify the important selection criteria that are considered by customers in selecting Islamic banks in the Kingdom of Bahrain. A 5-Likert scale survey questionnaire and ANOVA were used as the research method. The results indicate that the religious factors were ranked as the most important selection criteria for selecting Islamic banks. The study also found service quality factors as the second important selection criteria. This study is expected to provide Islamic banks in Bahrain with some inputs in setting up their marketing strategies in order to attract new customers and retain their existing customers. This study is also expected to add value to the literature by providing the updated empirical study in the area. DOI: 10.15408/aiq9i2.4635

  20. SUPPLIER SELECTION CRITERIA IN A POWER UTILITY IN MALAYSIA: ENGINEERS’ PERCEPTIONS

    Directory of Open Access Journals (Sweden)

    Sivadass Thiruchelvam

    2012-06-01

    Full Text Available Supplier selection of electricity generating, transmitting and distributing systems is part of the problem-solving environment in a power utility because it is a long-term investment for the organisation. Therefore, the decision over supplier selection directly influences the operational and financial position of a power utility. In addition, the supplier selection of a power-related system is a complex multi-criteria decision problem. While some criteria may be common across different industries, there are some criteria unique to the power industry. This research aims to understand what constitutes the suitable supplier selection criteria for a power utility. This study reveals some interesting findings of how engineers perceive the importance of each criterion and suggests strongly that product quality, price and delivery are key determinants in the supplier evaluation process. The eighteen criteria considered for this study were mapped onto their respective cluster, namely: supplier’s organisational system and technology, buyer-supplier relationship and economic value. The findings of this study should assist various groups of stakeholders (e.g., suppliers, buyers and end users to gain a better understanding of social behaviour in making purchase decisions, particularly with regard to power utilities.

  1. Spectral optical properties of selected photosynthetic microalgae producing biofuels

    International Nuclear Information System (INIS)

    Lee, Euntaek; Heng, Ri-Liang; Pilon, Laurent

    2013-01-01

    This paper presents the spectral complex index of refraction of biofuel producing photosynthetic microalgae between 400 and 750 nm. They were retrieved from their experimentally measured average absorption and scattering cross-sections. The microalgae were treated as homogeneous polydisperse spheres with equivalent diameter such that their surface area was identical to that of their actual spheroidal shape. An inverse method was developed combining Lorentz–Mie theory as the forward method and genetic algorithm. The unicellular green algae Chlamydomonas reinhardtii strain CC125 and its truncated chlorophyll antenna transformants tla1, tlaX, and tla1-CW + as well as Botryococcus braunii, Chlorella sp., and Chlorococcum littorale were investigated. These species were selected for their ability to produce either hydrogen gas or lipids for liquid fuel production. Their retrieved real and imaginary parts of the complex index of refraction were continuous functions of wavelength with absorption peaks corresponding to those of in vivo Chlorophylls a and b. The T-matrix method was also found to accurately predict the experimental measurements by treating the microalgae as axisymmetric spheroids with the experimentally measured major and minor diameter distributions and the retrieved spectral complex index of refraction. Finally, pigment mass fractions were also estimated from the retrieved absorption index. The method and/or the reported optical properties can be used in various applications from ocean remote sensing, carbon cycle study, as well as photobiological carbon dioxide mitigation and biofuel production. -- Highlights: ► Retrieval of optical properties from average absorption and scattering cross-sections. ► Inverse method based on Lorentz–Mie theory and genetic algorithm. ► Refraction and absorption indices of selected microalgae between 400 and 750 nm. ► Determination of pigment concentrations from absorption index. ► Good agreement between T

  2. A Review on influencing criteria for selecting supplier of information technology services in the hospital.

    Science.gov (United States)

    Ajami, Sima; Rajabzadeh, Ahmad; Ketabi, Saeedeh

    2014-01-01

    Organizations try to outsource their activities as much as possible in order to prevent the problems and use organizational capabilities in Information Technology (IT) field. The purpose of this paper was first, to express the effective criteria for selecting suppliers of IT services, second, to explain the advantages and disadvantages of outsourcing IT in hospitals. This study was narrative review, which search was conducted with the help of libraries, books, conference proceedings, and databases of Science Direct, PubMed, Proquest, Springer, and SID (Scientific Information Database). In our searches, we employed the following keywords and their combinations: Outsourcing, information technology, hospital, decision making, and criteria. The preliminary search resulted in 120 articles, which were published between 2000 and 2013 during July 2013. After a careful analysis of the content of each paper, a total of 46 papers were selected based on their relevancy. The criteria and sub-criteria influencing outsourcing decisions in Iranian hospitals were identified in six major categories including administrative issues, issues related to the service/product, technology factors, environmental factors, risks, and economic factors associated with 15 sub-criteria containing business integration, dependence on suppliers, human resources, focus on core competencies, facilities and physical capital, innovation, quality, speed of service delivery, flexibility, market capabilities, geographical location, security, management control, cost, and financial capability. Identify the advantages and disadvantages of outsourcing and effective criteria in IT services supplier selection causes the managers be able to take the most appropriate decision to select supplier of IT services. This is a general review on influencing criteria for electing of supplier of information technology services in hospitals.

  3. A Review on influencing criteria for selecting supplier of information technology services in the hospital

    Science.gov (United States)

    Ajami, Sima; Rajabzadeh, Ahmad; Ketabi, Saeedeh

    2014-01-01

    Organizations try to outsource their activities as much as possible in order to prevent the problems and use organizational capabilities in Information Technology (IT) field. The purpose of this paper was first, to express the effective criteria for selecting suppliers of IT services, second, to explain the advantages and disadvantages of outsourcing IT in hospitals. This study was narrative review, which search was conducted with the help of libraries, books, conference proceedings, and databases of Science Direct, PubMed, Proquest, Springer, and SID (Scientific Information Database). In our searches, we employed the following keywords and their combinations: Outsourcing, information technology, hospital, decision making, and criteria. The preliminary search resulted in 120 articles, which were published between 2000 and 2013 during July 2013. After a careful analysis of the content of each paper, a total of 46 papers were selected based on their relevancy. The criteria and sub-criteria influencing outsourcing decisions in Iranian hospitals were identified in six major categories including administrative issues, issues related to the service/product, technology factors, environmental factors, risks, and economic factors associated with 15 sub-criteria containing business integration, dependence on suppliers, human resources, focus on core competencies, facilities and physical capital, innovation, quality, speed of service delivery, flexibility, market capabilities, geographical location, security, management control, cost, and financial capability. Identify the advantages and disadvantages of outsourcing and effective criteria in IT services supplier selection causes the managers be able to take the most appropriate decision to select supplier of IT services. This is a general review on influencing criteria for electing of supplier of information technology services in hospitals. PMID:25540781

  4. Dermatology Residency Selection Criteria with an Emphasis on Program Characteristics: A National Program Director Survey

    Directory of Open Access Journals (Sweden)

    Farzam Gorouhi

    2014-01-01

    Full Text Available Background. Dermatology residency programs are relatively diverse in their resident selection process. The authors investigated the importance of 25 dermatology residency selection criteria focusing on differences in program directors’ (PDs’ perception based on specific program demographics. Methods. This cross-sectional nationwide observational survey utilized a 41-item questionnaire that was developed by literature search, brainstorming sessions, and online expert reviews. The data were analyzed utilizing the reliability test, two-step clustering, and K-means methods as well as other methods. The main purpose of this study was to investigate the differences in PDs’ perception regarding the importance of the selection criteria based on program demographics. Results. Ninety-five out of 114 PDs (83.3% responded to the survey. The top five criteria for dermatology residency selection were interview, letters of recommendation, United States Medical Licensing Examination Step I scores, medical school transcripts, and clinical rotations. The following criteria were preferentially ranked based on different program characteristics: “advanced degrees,” “interest in academics,” “reputation of undergraduate and medical school,” “prior unsuccessful attempts to match,” and “number of publications.” Conclusions. Our survey provides up-to-date factual data on dermatology PDs’ perception in this regard. Dermatology residency programs may find the reported data useful in further optimizing their residency selection process.

  5. Statin Selection in Qatar Based on Multi-indication Pharmacotherapeutic Multi-criteria Scoring Model, and Clinician Preference.

    Science.gov (United States)

    Al-Badriyeh, Daoud; Fahey, Michael; Alabbadi, Ibrahim; Al-Khal, Abdullatif; Zaidan, Manal

    2015-12-01

    Statin selection for the largest hospital formulary in Qatar is not systematic, not comparative, and does not consider the multi-indication nature of statins. There are no reports in the literature of multi-indication-based comparative scoring models of statins or of statin selection criteria weights that are based primarily on local clinicians' preferences and experiences. This study sought to comparatively evaluate statins for first-line therapy in Qatar, and to quantify the economic impact of this. An evidence-based, multi-indication, multi-criteria pharmacotherapeutic model was developed for the scoring of statins from the perspective of the main health care provider in Qatar. The literature and an expert panel informed the selection criteria of statins. Relative weighting of selection criteria was based on the input of the relevant local clinician population. Statins were comparatively scored based on literature evidence, with those exceeding a defined scoring threshold being recommended for use. With 95% CI and 5% margin of error, the scoring model was successfully developed. Selection criteria comprised 28 subcriteria under the following main criteria: clinical efficacy, best publish evidence and experience, adverse effects, drug interaction, dosing time, and fixed dose combination availability. Outcome measures for multiple indications were related to effects on LDL cholesterol, HDL cholesterol, triglyceride, total cholesterol, and C-reactive protein. Atorvastatin, pravastatin, and rosuvastatin exceeded defined pharmacotherapeutic thresholds. Atorvastatin and pravastatin were recommended as first-line use and rosuvastatin as a nonformulary alternative. It was estimated that this would produce a 17.6% cost savings in statins expenditure. Sensitivity analyses confirmed the robustness of the evaluation's outcomes against input uncertainties. Incorporating a comparative evaluation of statins in Qatari practices based on a locally developed, transparent, multi

  6. An evaluation of selection criteria on primary water chemistry parameters for SMART

    International Nuclear Information System (INIS)

    Choi, B. S.; Kim, S. H.; Yun, J. H.; Bae, Y. Y.; Gee, S. G.

    2003-01-01

    The selection criteria on the primary water chemistry of SMART by comparing the chemical design features with those of the current operating PWRs is analyzed. The most essential differences in water chemistry between the PWRs and SMART reactor is characterized by the presence of boron in water. SMART is boron free reactor, and the ammonia is used as a pH reagent. In SMART reactor hydrogen gas is not added to the primary coolant, but is normally generated from the radiolysis of ammonia of the coolant passes through the core. Ammonia is added once per shift because SMART reactor has no letdown and charging system during power operation. Because of these competing processes, the concentrations of hydrogen, nitrogen and ammonia in the primary coolant are steady state concentrations, which depend on the decomposition/combination rate of ammonia. Ammonia chemistry in SMART reactor has many advantages in that no hydrogen gas injection is needed to control the dissolved oxygen in primary coolant because of spontaneous generation of hydrogen and nitrogen produced by the reaction of ammonia decomposition

  7. Methodology for Selecting Best Management Practices Integrating Multiple Stakeholders and Criteria. Part 1: Methodology

    Directory of Open Access Journals (Sweden)

    Mauricio Carvallo Aceves

    2016-02-01

    Full Text Available The implementation of stormwater Best Management Practices (BMPs could help re-establish the natural hydrological cycle of watersheds after urbanization, with each BMP presenting a different performance across a range of criteria (flood prevention, pollutant removal, etc.. Additionally, conflicting views from the relevant stakeholders may arise, resulting in a complex selection process. This paper proposes a methodology for BMP selection based on the application of multi-criteria decision aid (MCDA methods, integrating multiple stakeholder priorities and BMP combinations. First, in the problem definition, the MCDA methods, relevant criteria and design guidelines are selected. Next, information from the preliminary analysis of the watershed is used to obtain a list of relevant BMPs. The third step comprises the watershed modeling and analysis of the BMP alternatives to obtain performance values across purely objective criteria. Afterwards, a stakeholder analysis based on survey applications is carried out to obtain social performance values and criteria priorities. Then, the MCDA methods are applied to obtain the final BMP rankings. The last step considers the sensitivity analysis and rank comparisons in order to draw the final conclusions and recommendations. Future improvements to the methodology could explore inclusion of multiple objective analysis, and alternative means for obtaining social performance values.

  8. A grey DEMATEL approach to develop third-party logistics provider selection criteria

    DEFF Research Database (Denmark)

    Govindan, Kannan; Khodaverdi, Roohollah; Vafadarnikjoo, Amin

    2016-01-01

    - The paper's results help managers of automotive industries, particularly in developing countries, to outsource logistics activities to 3PL providers effectively and to create a significant competitive advantage. Originality/value - The main contributions of this paper are twofold. First, this paper proposes...... an integrated grey DEMATEL method to consider interdependent relationships among the 3PL provider selection criteria. Second, this study is one of the first studies to consider 3PL provider selection in a developing country like Iran....... identifies important criteria for 3PL provider selection and evaluation, and the purpose of this paper is to select 3PL providers from the viewpoint of firms which were already outsourcing their logistics services. Design/methodology/approach - This study utilized the grey decision-making trial...

  9. Analysis of Satellite AIS Data to Derive Weather Judging Criteria for Voyage Route Selection

    Directory of Open Access Journals (Sweden)

    Michio Fujii

    2017-06-01

    Full Text Available The operational limitations are discussed at the IMO as a part of the second generation intact stability criteria. Since it is a first attempt to introduce operational efforts into safety regulations, comprehensive discussions are necessary to realize practically acceptable ones. Therefore this study investigates actual navigation routes of container ships and pure car carriers in the trans-North Pacific Ocean in winter, because they are prone to suffer significant parametric roll which is one of stability failure modes. Firstly, interviews are made to shipmasters who have experiences to have operated the subject ships to identify major elements for route selection in the North Pacific Ocean. Secondly, sufficient number of actual navigation records is collected from Satellite AIS data to derive the weather criteria for the route selection in severe weather condition. Finally, shipmaster’s on-board decision-making criteria are discussed by analysing the ship tracking data and weather data.

  10. An integrated multi-criteria decision-making methodology for conveyor system selection

    Directory of Open Access Journals (Sweden)

    Pairat Jiamruangjarus

    2016-12-01

    Full Text Available Material handling equipment (MHE is important for every industry because it has an effect on the productivity of manufacturing. Conveyor systems are presently one popular type of MHE. This paper presents an integration of the analytic network process (ANP with the benefits, opportunities, costs and risk (BOCR model in order to select the best conveyor system. The proposed model established a network with four merits, six strategies criteria, and twenty six sub-criteria with four alternatives (present, roller conveyor, chain conveyor, and monorail. The ANP is to determine the relative weights of an evaluative criteria and decision alternatives. Therefore, the final ranking of the alternatives are calculated by synthesizing the score of each alternative under BOCR. The results showed that the best alternative under all five methods is the chain conveyor. These research results can be easily applied, adapted and used to improve performance of selecting the conveyer system in small and medium enterprises through large industries.

  11. Selection of suitable e-learning approach using TOPSIS technique with best ranked criteria weights

    Science.gov (United States)

    Mohammed, Husam Jasim; Kasim, Maznah Mat; Shaharanee, Izwan Nizal Mohd

    2017-11-01

    This paper compares the performances of four rank-based weighting assessment techniques, Rank Sum (RS), Rank Reciprocal (RR), Rank Exponent (RE), and Rank Order Centroid (ROC) on five identified e-learning criteria to select the best weights method. A total of 35 experts in a public university in Malaysia were asked to rank the criteria and to evaluate five e-learning approaches which include blended learning, flipped classroom, ICT supported face to face learning, synchronous learning, and asynchronous learning. The best ranked criteria weights are defined as weights that have the least total absolute differences with the geometric mean of all weights, were then used to select the most suitable e-learning approach by using TOPSIS method. The results show that RR weights are the best, while flipped classroom approach implementation is the most suitable approach. This paper has developed a decision framework to aid decision makers (DMs) in choosing the most suitable weighting method for solving MCDM problems.

  12. The Ideal Criteria of Supplier Selection for SMEs Food Processing Industry

    OpenAIRE

    Ramlan Rohaizan; Engku Abu Bakar Engku Muhammad Nazri; Mahmud Fatimah; Ng Hooi Keng

    2016-01-01

    Selection of good supplier is important to determine the performance and profitability of SMEs food processing industry. The lack of managerial capability on supplier selection in SMEs food processing industry affects the competitiveness of SMEs food processing industry. This research aims to determine the ideal criteria of supplier for food processing industry using Analytical Hierarchy Process (AHP). The research was carried out in a quantitative method by distributing questionnaires to 50 ...

  13. Assessing the Job Selection Criteria of Accounting Students: a Normative Approach

    OpenAIRE

    zubairu, umaru; Ismail, Suhaiza; Abdul Hamid, Fatima

    2017-01-01

    This research assessed to what extent final-year Muslim accounting students in Malaysia considered Islamic principles when choosing a job after graduation. 356 final-year Muslim accounting students in four Malaysian universities were surveyed using an open-ended job selection scenario. The result shows that reality does not live up to the ideal. Only 16% of the respondents apply Islamic principles in making a job selection decision. The remaining 84% are more concerned with other criteria suc...

  14. 34 CFR 658.31 - What selection criteria does the Secretary use?

    Science.gov (United States)

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What selection criteria does the Secretary use? 658.31 Section 658.31 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION UNDERGRADUATE INTERNATIONAL STUDIES AND FOREIGN LANGUAGE...

  15. 78 FR 12955 - Final Requirements, Definitions, and Selection Criteria-Native American Career and Technical...

    Science.gov (United States)

    2013-02-26

    ... career and technical education programs (20 U.S.C. 2326(e)). This notice does not preclude us from... DEPARTMENT OF EDUCATION 34 CFR Chapter IV [Docket ID ED-2012-OVAE-0053] Final Requirements, Definitions, and Selection Criteria--Native American Career and Technical Education Program (NACTEP) [Catalog...

  16. Selection criteria for building performance simulation tools : contrasting architects' and engineers' needs

    NARCIS (Netherlands)

    Attia, S.G.; Hensen, J.L.M.; Beltran, L.; De Herde, A.

    2012-01-01

    This article summarises a study undertaken to reveal potential challenges and opportunities for using building performance simulation (BPS) tools. The article reviews current trends in building simulation and outlines major criteria for BPS tool selection and evaluation based on analysing users'

  17. HOSPITAL SITE SELECTION USING TWO-STAGE FUZZY MULTI-CRITERIA DECISION MAKING PROCESS

    Directory of Open Access Journals (Sweden)

    Ali Soltani

    2011-06-01

    Full Text Available Site selection for sitting of urban activities/facilities is one of the crucial policy-related decisions taken by urban planners and policy makers. The process of site selection is inherently complicated. A careless site imposes exorbitant costs on city budget and damages the environment inevitably. Nowadays, multi-attributes decision making approaches are suggested to use to improve precision of decision making and reduce surplus side effects. Two well-known techniques, analytical hierarchal process and analytical network process are among multi-criteria decision making systems which can easily be consistent with both quantitative and qualitative criteria. These are also developed to be fuzzy analytical hierarchal process and fuzzy analytical network process systems which are capable of accommodating inherent uncertainty and vagueness in multi-criteria decision-making. This paper reports the process and results of a hospital site selection within the Region 5 of Shiraz metropolitan area, Iran using integrated fuzzy analytical network process systems with Geographic Information System (GIS. The weights of the alternatives were calculated using fuzzy analytical network process. Then a sensitivity analysis was conducted to measure the elasticity of a decision in regards to different criteria. This study contributes to planning practice by suggesting a more comprehensive decision making tool for site selection.

  18. HOSPITAL SITE SELECTION USING TWO-STAGE FUZZY MULTI-CRITERIA DECISION MAKING PROCESS

    Directory of Open Access Journals (Sweden)

    Ali Soltani

    2011-01-01

    Full Text Available Site selection for sitting of urban activities/facilities is one of the crucial policy-related decisions taken by urban planners and policy makers. The process of site selection is inherently complicated. A careless site imposes exorbitant costs on city budget and damages the environment inevitably. Nowadays, multi-attributes decision making approaches are suggested to use to improve precision of decision making and reduce surplus side effects. Two well-known techniques, analytical hierarchal process and analytical network process are among multi-criteria decision making systems which can easily be consistent with both quantitative and qualitative criteria. These are also developed to be fuzzy analytical hierarchal process and fuzzy analytical network process systems which are capable of accommodating inherent uncertainty and vagueness in multi-criteria decision-making. This paper reports the process and results of a hospital site selection within the Region 5 of Shiraz metropolitan area, Iran using integrated fuzzy analytical network process systems with Geographic Information System (GIS. The weights of the alternatives were calculated using fuzzy analytical network process. Then a sensitivity analysis was conducted to measure the elasticity of a decision in regards to different criteria. This study contributes to planning practice by suggesting a more comprehensive decision making tool for site selection.

  19. The Predictive Value of Selection Criteria in an Urban Magnet School

    Science.gov (United States)

    Lohmeier, Jill Hendrickson; Raad, Jennifer

    2012-01-01

    The predictive value of selection criteria on outcome data from two cohorts of students (Total N = 525) accepted to an urban magnet high school were evaluated. Regression analyses of typical screening variables (suspensions, absences, metropolitan achievement tests, middle school grade point averages [GPAs], Matrix Analogies test scores, and…

  20. Relationship between Admission Selection Criteria and Academic Progression for Student Nurse Anesthetists

    Science.gov (United States)

    Burns, Sharon M.

    2009-01-01

    Today's admission selection criteria require refinement with the intention of fostering academic progression for students entering nurse anesthesia programs (Reese, 2002).With the escalating cost of graduate education coupled with the current economic crisis, efforts by educational leaders to minimize attrition remains pivotal (Andrews, Johansson,…

  1. 25 CFR 1001.10 - Selection criteria for other planning and negotiating financial assistance.

    Science.gov (United States)

    2010-04-01

    ... for other financial assistance for planning and negotiating of a DOI non-BIA program, service... circumstances may planning and negotiation financial assistance be made available to tribes/consortia? At the... 25 Indians 2 2010-04-01 2010-04-01 false Selection criteria for other planning and negotiating...

  2. Fuels planning: science synthesis and integration; economic uses fact sheet 06: selection criteria analysis

    Science.gov (United States)

    Rocky Mountain Research Station USDA Forest Service

    2004-01-01

    Confidence in decisionmaking can often come from knowing if others in similar circumstances would choose the same management strategy. Researchers at the USDA FS Pacific Northwest Research Station and the University of Saskatchewan have developed a Selection Criteria Analysis for answering this very question. This fact sheet discusses factors affecting the choice of...

  3. A Hybrid Multiple-Criteria Decision-Making Approach for Photovoltaic Solar Plant Location Selection

    Directory of Open Access Journals (Sweden)

    Amy H. I. Lee

    2017-01-01

    Full Text Available Due to decaying fossil resource and increasing environmental consciousness, the demand of renewable energy resources is escalating these days. Photovoltaic solar energy is one of the most popular renewable energy resources in places where sunlight is abundant. The selection of a desirable location for constructing a photovoltaic solar plant is the first and one of the most important stages in the plant construction to provide a long-term energy production. In this paper, a comprehensive multiple-criteria decision-making model, which incorporates the interpretive structural modeling (ISM, fuzzy analytic network process (FANP and VIKOR (VlseKriterijumska OptimizacijaI Kompromisno Resenje in Serbian,meaning multi-criteria optimization and compromise solution, is proposed to select the most suitable photovoltaic solar plant location. The ISM is applied first to determine the interrelationships among the criteria and among the sub-criteria,andtheresults are used to construct a decision-making network. The FANP is applied next to solve the network and to calculate the importance weights of the sub-criteria. Finally, the VIKOR is adopted to determine the ranking of the photovoltaic solar plant locations. The proposed model is applied in a case study in evaluating photovoltaic solar plant locations in Taiwan. By applying the proposed model, decision makers can have a better thinking process and make more appropriate decisions justifiably.

  4. Selection of materials using multi-criteria decision-making methods with minimum data

    Directory of Open Access Journals (Sweden)

    Shankar Chakraborty

    2013-07-01

    Full Text Available Selection of material for a specific engineering component, which plays a significant role in its design and proper functioning, is often treated as a multi-criteria decision-making (MCDM problem where the most suitable material is to be chosen based on a given set of conflicting criteria. For solving these MCDM problems, the designers do not generally know what should be the optimal number of criteria required for arriving at the best decisive action. Those criteria should be independent to each other and their number should usually limit to seven plus or minus two. In this paper, five material selection problems are solved using three common MCDM techniques to demonstrate the effect of number of criteria on the final rankings of the material alternatives. It is interesting to observe that the choices of the best suited materials solely depend on the criterion having the maximum priority value. It is also found that among the three MCDM methods, the ranking performance of VIKOR (Vlse Kriterijumska Optimizacija Kompromisno Resenje method is the best.

  5. Home blood pressure monitoring and self-titration of antihypertensive medications: Proposed patient selection criteria.

    Science.gov (United States)

    Hill, James R

    2016-05-01

    Recent studies have demonstrated that home blood pressure monitoring (HBPM), coupled with self-titration of medications is a viable intervention to control hypertension. There are currently no established criteria to evaluate patients for inclusion in such a program. The purpose of this discussion is to propose criteria for determining if a patient is appropriate to participate in a program of HBPM and self-titration. Inclusion criteria for two self-titration trials were examined, and additional factors in clinical practice were identified and discussed. Additional selection criteria were proposed to support the decision to enroll a patient in an antihypertensive self-titration program. Inclusion criteria from self-titration trials provide a reasonable starting point for choosing appropriate patients in clinical practice, but additional research is necessary. Adaptation of these criteria and consideration of the identified factors can be used to develop decision support instruments. Such instruments should be evaluated for effectiveness and reliability prior to use in clinical practice. HBPM combined with self-titration is an effective patient-centered approach for hypertension management. Decision support instruments to determine appropriate patients are necessary for safe and effective use in clinical practice. ©2015 American Association of Nurse Practitioners.

  6. Analysis of Different Feature Selection Criteria Based on a Covariance Convergence Perspective for a SLAM Algorithm

    Science.gov (United States)

    Auat Cheein, Fernando A.; Carelli, Ricardo

    2011-01-01

    This paper introduces several non-arbitrary feature selection techniques for a Simultaneous Localization and Mapping (SLAM) algorithm. The feature selection criteria are based on the determination of the most significant features from a SLAM convergence perspective. The SLAM algorithm implemented in this work is a sequential EKF (Extended Kalman filter) SLAM. The feature selection criteria are applied on the correction stage of the SLAM algorithm, restricting it to correct the SLAM algorithm with the most significant features. This restriction also causes a decrement in the processing time of the SLAM. Several experiments with a mobile robot are shown in this work. The experiments concern the map reconstruction and a comparison between the different proposed techniques performance. The experiments were carried out at an outdoor environment composed by trees, although the results shown herein are not restricted to a special type of features. PMID:22346568

  7. Fuzzy decision-making: a new method in model selection via various validity criteria

    International Nuclear Information System (INIS)

    Shakouri Ganjavi, H.; Nikravesh, K.

    2001-01-01

    Modeling is considered as the first step in scientific investigations. Several alternative models may be candida ted to express a phenomenon. Scientists use various criteria to select one model between the competing models. Based on the solution of a Fuzzy Decision-Making problem, this paper proposes a new method in model selection. The method enables the scientist to apply all desired validity criteria, systematically by defining a proper Possibility Distribution Function due to each criterion. Finally, minimization of a utility function composed of the Possibility Distribution Functions will determine the best selection. The method is illustrated through a modeling example for the A verage Daily Time Duration of Electrical Energy Consumption in Iran

  8. Determination and evaluation of effective criteria to location selection the optimal for establishing fluting paper mills from agricultural residues of Mazandaran province

    Directory of Open Access Journals (Sweden)

    Abdollah barimani

    2013-11-01

    Full Text Available Location selection for factory competitiveness in the market place plays an important role and should be chosen so that will leads achievement of the strategic advantages compared with other competitors. The objective of this study was determination of the effective criteria for decision making to select the most suitable location for establishing a fluting paper mills from agricultural residues. For this purpose, effective criteria were divided into five major groups: Material and Product, Facilities and limitations of regional (infrastructure, Technical and Human, Economical, Rules & Regulations as well as 33 sub-criteria, after preliminary investigation, preparatory observation, and an interview with some of the paper producers and relevant experts. A hierarchy was designed based on five major groups of criteria and then the priority rates of obtained criteria and sub-criteria were determined by Analytical Hierarchy Process (AHP after compiling expert's opinions via questionnaire. Results have shown that among 33 determined effective criteria in location selection of fluting paper mills from agricultural residues , the sub-criteria of Supply residual amount, Ensure the supply of residual, Cost purchasing of raw material, Cost of transporting raw material have the highest priorities, respectively

  9. Multiple criteria decision making with life cycle assessment for material selection of composites

    Directory of Open Access Journals (Sweden)

    A. S. Milani

    2011-12-01

    Full Text Available With the advancement of interdisciplinary approaches in today’s modern engineering, current efforts in optimal design of composites include seeking material selection protocols that can (1 simultaneously consider a series of mechanical/electrical/chemical cost criteria over a set of alternative material options, and (2 closely take into account environmental aspects of final products including recycling and end-of-life disposal options. In this paper, in addition to a review of some recent experimental and methodological advances in the above areas, a new application of multiple criteria decision making (MCDM is presented to deal with decision conflicts often seen among design criteria in composite material selection with the help of life cycle assessment (LCA. To show the application, an illustrative case study on a plastic gear material selection is conducted where the cost, mechanical and thermal properties along with environmental impact criteria are to be satisfied simultaneously. A pure plastic gear is compared to a Polyethylene terephthalate (PET/aluminum-powder composite alternative. Results suggest that simple MCDM models, including a signal-to-noise measure adapted to MCDM in the same case study, can be used to explore both trade-offs and design break-even points in large decision spaces as the decision maker’s perspective over environmental, material performance and cost attributes change during the design process. More advanced topics including the account of material data uncertainties are addressed.

  10. Multi-criteria analysis on how to select solar radiation hydrogen production system

    Energy Technology Data Exchange (ETDEWEB)

    Badea, G.; Naghiu, G. S., E-mail: naghiu.george@gmail.com; Felseghi, R.-A.; Giurca, I., E-mail: giurca-ioan@yahoo.com [Technical University of Cluj-Napoca, Faculty of Building Services Engineering, Boulevard December 21, no. 128-130, Cluj-Napoca, 400604 (Romania); Răboacă, S. [National R& D Institute for Cryogenic and Isotopic Technologies, str. Uzinei, no. 4, Rm. Vălcea, 240050 (Romania); Aşchilean, I. [SC ACI Cluj SA, Avenue Dorobanţilor, no. 70, Cluj-Napoca, 400609 (Romania)

    2015-12-23

    The purpose of this article is to present a method of selecting hydrogen-production systems using the electric power obtained in photovoltaic systems, and as a selecting method, we suggest the use of the Advanced Multi-Criteria Analysis based on the FRISCO formula. According to the case study on how to select the solar radiation hydrogen production system, the most convenient alternative is the alternative A4, namely the technical solution involving a hydrogen production system based on the electrolysis of water vapor obtained with concentrated solar thermal systems and electrical power obtained using concentrating photovoltaic systems.

  11. Attitude of the Korean dentists towards radiation safety and selection criteria

    International Nuclear Information System (INIS)

    Lee, Byung Do; Ludlow, John B.

    2013-01-01

    X-ray exposure should be clinically justified and each exposure should be expected to give patients benefits. Since dental radiographic examination is one of the most frequent radiological procedures, radiation hazard becomes an important public health concern. The purpose of this study was to investigate the attitude of Korean dentists about radiation safety and use of criteria for selecting the frequency and type of radiographic examinations. The study included 267 Korean dentists. Five questions related to radiation safety were asked of each of them. These questions were about factors associated with radiation protection of patients and operators including the use of radiographic selection criteria for intraoral radiographic procedures. The frequency of prescription of routine radiographic examination (an example is a panoramic radiograph for screening process for occult disease) was 34.1%, while that of selective radiography was 64.0%. Dentists' discussion of radiation risk and benefit with patients was infrequent. More than half of the operators held the image receptor by themselves during intraoral radiographic examinations. Lead apron/thyroid collars for patient protection were used by fewer than 22% of dental offices. Rectangular collimation was utilized by fewer than 15% of dental offices. The majority of Korean dentists in the study did not practice radiation protection procedures which would be required to minimize exposure to unnecessary radiation for patients and dental professionals. Mandatory continuing professional education in radiation safety and development of Korean radiographic selection criteria is recommended.

  12. A two-phased multi-criteria decision-making approach for selecting the best smartphone

    Directory of Open Access Journals (Sweden)

    Yildiz, Aytac

    2015-11-01

    Full Text Available In the last 20 years, rapid and significant developments have occurred in communication and information technologies. In parallel with these developments, the importance of smartphones has increased. In addition, many smartphone manufacturers have launched and continue to launch a number of new models with many features. People who want to buy a new smartphone have difficulties selecting the best smartphone among the numerous models available on the technology markets. Therefore, smartphone selection has become a complex multi-criteria decision-making (MCDM problem for people. Hence, decision-making processes will be facilitated by using MCDM methods, and these will provide the most appropriate decision. In this paper, the best smartphone among the 28 alternatives determined by the person who will buy them are selected by using three main criteria and 17 sub-criteria with the help of a two-phased MCDM approach. In the first phase, 28 smartphone alternatives are ranked using the analytic network process (ANP. In the second phase, a model that includes the best four alternatives of ANP is created. Afterwards, the best smartphone is selected using the generalised Choquet integral (GCI method according to this model. Finally, the findings and the results are given.

  13. Attitude of the Korean dentists towards radiation safety and selection criteria

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byung Do [Dept. of Oral and Maxillofacial Radiology and Wonkwang Dental Research Institute, College of Dentistry, Wonkwang University, Iksan (Korea, Republic of); Ludlow, John B. [Graduate Program in Oral and Maxillofacial Radiology, School of Dentistry, University of North Carolina, Chapel Hill (United States)

    2013-09-15

    X-ray exposure should be clinically justified and each exposure should be expected to give patients benefits. Since dental radiographic examination is one of the most frequent radiological procedures, radiation hazard becomes an important public health concern. The purpose of this study was to investigate the attitude of Korean dentists about radiation safety and use of criteria for selecting the frequency and type of radiographic examinations. The study included 267 Korean dentists. Five questions related to radiation safety were asked of each of them. These questions were about factors associated with radiation protection of patients and operators including the use of radiographic selection criteria for intraoral radiographic procedures. The frequency of prescription of routine radiographic examination (an example is a panoramic radiograph for screening process for occult disease) was 34.1%, while that of selective radiography was 64.0%. Dentists' discussion of radiation risk and benefit with patients was infrequent. More than half of the operators held the image receptor by themselves during intraoral radiographic examinations. Lead apron/thyroid collars for patient protection were used by fewer than 22% of dental offices. Rectangular collimation was utilized by fewer than 15% of dental offices. The majority of Korean dentists in the study did not practice radiation protection procedures which would be required to minimize exposure to unnecessary radiation for patients and dental professionals. Mandatory continuing professional education in radiation safety and development of Korean radiographic selection criteria is recommended.

  14. Use of DOE site selection criteria for screening low-level waste disposal sites on the Oak Ridge Reservation

    International Nuclear Information System (INIS)

    Lee, D.W.; Ketelle, R.H.; Stinton, L.H.

    1983-09-01

    The proposed Department of Energy (DOE) site selection criteria were applied to the Oak Ridge Reservation, and the application was evaluated to determine the criteria's usefulness in the selection of a low-level waste disposal site. The application of the criteria required the development of a methodology to provide a framework for evaluation. The methodology is composed of site screening and site characterization stages. The site screening stage relies on reconnaissance data to identify a preferred site capable of satisfying the site selection criteria. The site characterization stage relies on a detailed site investigation to determine site acceptability. The site selection criteria were applied to the DOE Oak Ridge Reservation through the site screening stage. Results of this application were similar to those of a previous siting study on the Oak Ridge Reservation. The DOE site selection criteria when coupled with the methodology that was developed were easily applied and would be adaptable to any region of interest

  15. Site selection criteria for shallow land burial of low-level radioactive waste

    International Nuclear Information System (INIS)

    Falconer, K.L.; Hull, L.C.; Mizell, S.A.

    1982-01-01

    Twelve site selection criteria are presented. These are: (1) site shall be of sufficient area and depth to accommodate the projected volume of waste and a three dimensional buffer zone; (2) site should allow waste to be buried either completely above or below the transition zone between the unsaturated and saturated zones; (3) site should be located where flooding will not jeopardize performance; (4) site should be located where erosion will not jeopardize performance; (5) site should be located in areas where hydrogeologic conditions allow reliable performance prediction; (6) site should be located where geologic hazards will not jeopardize performance; (7) site should be selected with considerations given to those characteristics of earth materials and water chemistry that favor increased residence times and/or attenuation of radionuclide concentrations within site boundaries; (8) site should be selected with consideration given to current and projected population distributions; (9) site should be selected with consideration given to current and projected land use and resource development; (10) site should be selected with consideration given to location of waste generation, access to all-weather highway and rail routes, and access utilities; (11) site should be selected consistent with federal laws and regulations; (12) site should not be located within areas that are protected from such use by federal laws and regulations. These criteria are considered preliminary and do not necessarily represent the position of the Department of Energy's Low-Level Waste Management Program

  16. Integrated shape and material selection for single and multi-performance criteria

    International Nuclear Information System (INIS)

    Singh, Jasveer; Mirjalili, Vahid; Pasini, Damiano

    2011-01-01

    Research highlights: → The method of shape transformers is extended to torsional stiffness and combined load design. → The method is generalized for multi-criteria selection of shape and material. → Performance charts are presented for single and multi-objective selection of cross-section shape and material. → A four quadrant performance chart is presented to visualize the relation between objective function space and design variable space. -- Abstract: A shape and material selection method, based on the concept of shape transformers, has been recently introduced to characterize the mass efficiency of lightweight beams under bending and shear. This paper extends this method to deal with the case of torsional stiffness design, and generalize it to single and multi-crieria selection of lightweight shafts subjected to a combination of bending, shear, and torsional load. The novel feature of the paper is the useful integration of shape and material to model and visualize multi-objective selection problems. The scheme is centered on concept selection in structural design, and hinges on measures that govern the shape properties of a cross-section regardless of its size. These measures, referred as shape transformers, can classify shapes in a way similar to material classification. The procedure is exemplified by considering torsional stiffness as a constraint. The performance charts are developed for single and multi-criteria to visualize in a glance the whole range of cross-sectional shapes for each material. Each design chart is explained with a brief example.

  17. Multi-criteria selection of offshore wind farms: Case study for the Baltic States

    International Nuclear Information System (INIS)

    Chaouachi, Aymen; Covrig, Catalin Felix; Ardelean, Mircea

    2017-01-01

    This paper presents a multi-criteria selection approach for offshore wind sites assessment. The proposed site selection framework takes into consideration the electricity network’s operating security aspects, economic investment, operation costs and capacity performances relative to each potential site. The selection decision is made through Analytic Hierarchy Process (AHP), with an inherited flexibility that aims to allow end users to adjust the expected benefits accordingly to their respective and global priorities. The proposed site selection framework is implemented as an interactive case study for three Baltic States in the 2020 time horizon, based on real data and exhaustive power network models, taking into consideration the foreseen upgrades and network reinforcements. For each country the optimal offshore wind sites are assessed under multiple weight contribution scenarios, reflecting the characteristics of market design, regulatory aspects or renewable integration targets. - Highlights: • We use a multi-criteria selection approach for offshore wind sites assessment. • Security aspects, economic investment, operation costs and capacity performances are included. • The selection decision is made through an Analytic Hierarchy Process (AHP). • We implement the methodology as a case study for three Baltic States in the 2020 time horizon.

  18. Multi-criteria analysis for site selection for the reuse of reclaimed water and biosolids

    Directory of Open Access Journals (Sweden)

    António Albuquerque

    2015-01-01

    Full Text Available Low pH soils with insufficient organic matter can benefit from the application of reclaimed water (RW and biosolids. The presence of nutrients also aids plant growth. This paper presents the results of two integrated research studies, both carried out in the Beira Interior Region (Covilhã, Portugal; one used RW for irrigation, the other applied paper mill sludge to agricultural land. In both cases, multiple criteria based on GIS tools were used for site selection. In the first study, the characteristics of RW analyzed over 2 years were found suitable for crop irrigation. The RW had moderate organic content, low electrical conductivity (CE, high nutrient content (N, P, and low concentrations of nitrate, metals and phytotoxic elements (Al, B, Cl and Na. The multi-criteria analysis was carried out taking into account environmental, technical and economic criteria and a suitable area of 30.5 ha was found for RW irrigation. In the second work, the paper mill sludge was considered suitable for application to agricultural land. Its concentrations of N, P and heavy metals did not a present risk for soil contamination and were suitable for soil improvement and crop production. A multi-criteria analysis based on similar criteria was conducted and a suitable area of 253 ha was found for sludge application.

  19. Multi-criteria decision making on strategic selection of wind farms

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Amy H.I. [Department of Industrial Engineering and System Management, Chung Hua University, Hsinchu (China); Chen, Hsing Hung [Faculty of Management and Administration, Macau University of Science and Technology, Taipa (Macau); Kang, He-Yau [Department of Industrial Engineering and Management, National Chin-Yi University of Technology, Taiping, Taichung (China)

    2009-01-15

    With maturity of advanced technologies and urgent requirement for maintaining a healthy environment with reasonable price, China is moving toward a trend of generating electricity from renewable wind resources. How to select a suitable wind farm becomes an important focus for stakeholders. This paper first briefly introduces wind farm and then develops its critical success criteria. A new multi-criteria decision-making (MCDM) model, based on the analytic hierarchy process (AHP) associated with benefits, opportunities, costs and risks (BOCR), is proposed to help select a suitable wind farm project. Multiple factors that affect the success of wind farm operations are analyzed by taking into account experts' opinions, and a performance ranking of the wind farms is generated. (author)

  20. Selection criteria for container materials at the proposed Yucca Mountain high level nuclear waste repository

    International Nuclear Information System (INIS)

    Halsey, W.G.

    1989-11-01

    A geological repository has been proposed for the permanent disposal of the nation's high level nuclear waste at Yucca Mountain in the Nevada desert. The containers for this waste must remain intact for the unprecedented service lifetime of 1000 years. A combination of engineering, regulatory, and licensing requirements complicate the container material selection. In parallel to gathering information regarding the Yucca Mountain service environment and material performance data, a set of selection criteria have been established which compare candidate materials to the performance requirements, and allow a quantitative comparison of candidates. These criteria assign relative weighting to varied topic areas such as mechanical properties, corrosion resistance, fabricability, and cost. Considering the long service life of the waste containers, it is not surprising that the corrosion behavior of the material is a dominant factor. 7 refs

  1. Supplier Selection in the Thermal Tourism Enterprises with Using Multi Criteria Decision Making Techniques

    Directory of Open Access Journals (Sweden)

    Hatice Gündüz

    2015-06-01

    Full Text Available Turkey has many natural health resources and the interest in Thermal Tourism has increased. Thermal Tourism Enterprises serve their experienced medical staff, treatment methods and the curative springs for the purpose of care services. On the other hand, these enterprises are also the place to have both a rest and a good time. In this study, the supplier selection application is performed in the Thermal Tourism Enterprise that offers a combination of services as health, recreation and entertainment. The criteria as product quality and performance, product information, product arrival time, price, quality practices, flexibility and the collaboration level have been considered. By using multi-criteria decision making techniques as Analytic Hierarchy Process (AHP and TOPSIS then the suggestions on the selecting the best supplier are offered.

  2. [Use of Cone Beam Computed Tomography in endodontics: rational case selection criteria].

    Science.gov (United States)

    Rosen, E; Tsesis, I

    2016-01-01

    To present rational case selection criteria for the use of CBCT (Cone Beam Computed Tomography) in endodontics. This article reviews the literature concerning the benefits of CBCT in endodontics, alongside its radiation risks, and present case selection criteria for referral of endodontic patients to CBCT. Up to date, the expected ultimate benefit of CBCT to the endodontic patient is yet uncertain, and the current literature is mainly restricted to its technical efficacy. In addition, the potential radiation risks of CBCT scan are stochastic in nature and uncertain, and are worrying especially in pediatric patients. Both the efficacy of CBCT in supporting the endodontic practitioner decision making and in affecting treatment outcomes, and its long term potential radiation risks are yet uncertain. Therefore, a cautious rational decision making is essential when a CBCT scan is considered in endodontics. Risk-benefit considerations are presented.

  3. Benchmarking the Performance of Construction Procurement Methods against Selection Criteria in Nigeria

    Directory of Open Access Journals (Sweden)

    Stephen Okunlola Ojo

    2009-01-01

    Full Text Available The study developed performance indices by the widely used procurement options in Nigeria on selection criteria. The traditional mean and standardized ratio were used to form the utility coefficients. Results revealed that performance by the procurement options depended on the respondents’ categorization and cost categorization of projects. Public clients ranked the lump sum contracts more able to achieve speed for projects up to N100 million (Naira while the private clients believe it is the design-build. As regards quality, public clients rated the Build-Own-Operate-Transfer (BOOT system as most able to achieve the quality criterion whereas private clients rated design-build for projects up to N100 million (Naira. The study then concluded that, in the Nigerian construction industry participants do not agree on the performance of the procurement options on selection criteria.

  4. Some selection criteria for computers in real-time systems for high energy physics

    International Nuclear Information System (INIS)

    Kolpakov, I.F.

    1980-01-01

    The right choice of program source is for the organization of real-time systems of great importance as cost and reliability are decisive factors. Some selection criteria for program sources for high energy physics multiwire chamber spectrometers (MWCS) are considered in this report. MWCS's accept bits of information from event pattens. Large and small computers, microcomputers and intelligent controllers in CAMAC crates are compared with respect to the following characteristics: data exchange speed, number of addresses for peripheral devices, cost of interfacing a peripheral device, sizes of buffer and mass memory, configuration costs, and the mean time between failures (MTBF). The results of comparisons are shown by plots and histograms which allow the selection of program sources according to the above criteria. (Auth.)

  5. CRITERIA FOR SELECTION OF THE REINSURANCE COVERAGE FOR EXCESS OF LOSS TREATY

    Directory of Open Access Journals (Sweden)

    V. Veretnov

    2014-03-01

    Full Text Available Optimal reinsurance coverage, selected by the cedent, influenced by a number of internal, external, objective and subjective factors. Their accounting or ignoring depends on the individual conditions of the insurer, knowledge of the specific risk profiles of professional experience and decision-makers about the forms and methods of reinsurance coverage. Justified the selection criteria of reinsurance protection for the treaty excess of loss. Using these criteria makes it possible not only to optimize the reinsurance protection, but also to ensure a balance of interests in the long-term relationship of the cedent company and the reinsurer. The article also provides examples of how classes of insurance is advisable to use the obligatory contract portfolio sexcess of loss.

  6. Noise producing toys and the efficacy of product standard criteria to protect health and education outcomes.

    Science.gov (United States)

    McLaren, Stuart J; Page, Wyatt H; Parker, Lou; Rushton, Martin

    2013-12-19

    An evaluation of 28 commercially available toys imported into New Zealand revealed that 21% of these toys do not meet the acoustic criteria in the ISO standard, ISO 8124-1:2009 Safety of Toys, adopted by Australia and New Zealand as AS/NZS ISO 8124.1:2010. While overall the 2010 standard provided a greater level of protection than the earlier 2002 standard, there was one high risk toy category where the 2002 standard provided greater protection. A secondary set of toys from the personal collections of children known to display atypical methods of play with toys, such as those with autism spectrum disorders (ASD), was part of the evaluation. Only one of these toys cleanly passed the 2010 standard, with the remainder failing or showing a marginal-pass. As there is no tolerance level stated in the standards to account for interpretation of data and experimental error, a value of +2 dB was used. The findings of the study indicate that the current standard is inadequate in providing protection against excessive noise exposure. Amendments to the criteria have been recommended that apply to the recently adopted 2013 standard. These include the integration of the new approaches published in the recently amended European standard (EN 71) on safety of toys.

  7. Noise Producing Toys and the Efficacy of Product Standard Criteria to Protect Health and Education Outcomes

    Directory of Open Access Journals (Sweden)

    Stuart J. McLaren

    2013-12-01

    Full Text Available An evaluation of 28 commercially available toys imported into New Zealand revealed that 21% of these toys do not meet the acoustic criteria in the ISO standard, ISO 8124-1:2009 Safety of Toys, adopted by Australia and New Zealand as AS/NZS ISO 8124.1:2010. While overall the 2010 standard provided a greater level of protection than the earlier 2002 standard, there was one high risk toy category where the 2002 standard provided greater protection. A secondary set of toys from the personal collections of children known to display atypical methods of play with toys, such as those with autism spectrum disorders (ASD, was part of the evaluation. Only one of these toys cleanly passed the 2010 standard, with the remainder failing or showing a marginal-pass. As there is no tolerance level stated in the standards to account for interpretation of data and experimental error, a value of +2 dB was used. The findings of the study indicate that the current standard is inadequate in providing protection against excessive noise exposure. Amendments to the criteria have been recommended that apply to the recently adopted 2013 standard. These include the integration of the new approaches published in the recently amended European standard (EN 71 on safety of toys.

  8. Customers’ Perceptions on the Objectives, Characteristics and Selection Criteria of Islamic Bank in Thailand

    OpenAIRE

    Lateh, Nasrina; Ismail, Suhaiza; Ariffin, Noraini Mohd

    2009-01-01

    Due to relatively new establishment of islamic bank in Thailand and paucity of empirical research undertaken in the area, this study intends to capture the perceptions of Thai customers towards the objectives and characteristics of the islamic bank. In addition, this study aims to determine the important bank selection criteria as perceived by the customers and the differences in the perceptions of moslem and non-moslem customers were identified. The study surveys a sample of 462 respondents....

  9. Criteria for selecting children with special needs for dental treatment under general anaesthesia

    OpenAIRE

    Nova García, M. Joaquín de; Gallardo López, Nuria E.; Martín Sanjuán, Carmen; Mourelle Martínez, M. Rosa; Alonso García, Yolanda; Carracedo Cabaleiro, Esther

    2007-01-01

    Objective: To study criteria for helping to select children with special needs for dental treatment under general anaesthesia. Materials and methods: Group of 30 children (aged under 18) examined on the Course at the Universidad Complutense de Madrid (UCM) (Specialisation on holistic dental treatment of children with special needs) and subsequently referred to the Disabled Children’s Oral Health Unit (DCOHU) within Primary Health Care Area 2 of the Madrid Health Service (SERMAS) where dental ...

  10. USING A MULTI CRITERIA DECISION MAKING APPROACH FOR OPEN AND DISTANCE LEARNING SYSTEM SELECTION

    OpenAIRE

    KAMIŞLI ÖZTÜRK, Zehra

    2015-01-01

    Today, there's a wide variety of open and distance learning (ODL) systems around the world. Herein, for lifelong learning how to select an ODL program becomes a critic question for a learner who wants to extent abilities on his/her career path. This is a complex decision problem with interdependent criteria. The Analytic Network Process (ANP) is a multicriteria decision making methodology  that  reflects  these  interdependencies.  Within &...

  11. A F o cus on Far Eastern Tourists – Tour Operator Selection Criteria

    Directory of Open Access Journals (Sweden)

    Ayşe Çelik

    2014-03-01

    Full Text Available Tour operators are becoming more important in the long haul destination market. Identifying tour operator selection criteria is crucial to orientate marketing strategies. The aim of the study was to determine the tour operation selection criteria of a package holiday maker visiting Turkey from the Far East according to the nationality. Data was drawn up and analyzed from tourists who came from three of these countries namely: Japan, South Korea, and China between February and April 2013 in Cappadocia. Quantitative methodology employing One-way ANOVA analysis was used. Deduction was made by analysing the tour operator selection criteria data that nationality was not a meaningful differentiation for a tourist in their assessment of the “Service Quality’” and “Opportunity to interact with other people’” items referred to in the survey questionnaire. Other items from the resulting data gave meaningful differences in cross - cultural behaviour. Results from the study provide important cues for tour operator managers to consider developing different promotional strategy initiatives to engage and attract more Japanese, South Korean, and Chinese tourists to Turkey.

  12. Analysis of Paper reduction schemes to develop selection criteria for ofdm signals

    International Nuclear Information System (INIS)

    Abro, F.R.

    2015-01-01

    This paper presents a review of different PAPR (Peak to Average Power Ratio) reduction schemes of OFDM (Orthogonal Frequency Division Multiplexing) signals. The schemes that have been considered include Clipping and Filtering, Coding, ACE (Active Contstellation Extension), SLM (Selected Mapping), PTS (Partial Transmit Sequence), TI (Tone Injection) and TR (Tone Reservation). A comparative analysis has been carried out qualitatively. It has been demonstrated how these schemes can be combined with MIMO (Multiple Input Multiple Output) technologies. Finally, criteria for selection of PAPR reduction schemes of OFDM systems are discussed. (author)

  13. Assessing the Job Selection Criteria of Accounting Students: A Normative Approach

    Directory of Open Access Journals (Sweden)

    Umaru Zubairu

    2017-08-01

    Full Text Available This research assessed to what extent final-year Muslim accounting students in Malaysia considered Islamic principles when choosing a job after graduation. 356 final-year Muslim accounting students in four Malaysian universities were surveyed using an open-ended job selection scenario. The result shows that reality does not live up to the ideal. Only 16% of the respondents apply Islamic principles in making a job selection decision. The remaining 84% are more concerned with other criteria such as personal interests, salary considerations, and company reputation.

  14. Procurement selection criteria for projects in the public sector: evidence from Nigeria

    Directory of Open Access Journals (Sweden)

    Richard Ajayi Jimoh

    2016-12-01

    Full Text Available The selection of suitable procurement practice for construction projects is a very complex and demanding tasks for stakeholders in the construction industry. In spite of the overabundance of techniques and tools accessible to the stakeholders in selecting an appropriate procurement method, clients are faced with the decision as to which of the selection criteria can be adopted for a given construction project to achieve project goals and objectives. This paper focused on evaluating the existing procurement methods being practised in the Nigerian construction industry with a view to identifying and establishing the parameters for selection that will improve contract delivery systems. In this research, quantitative approach was used to collect data from 420 contractors, consultants and clients based in the Federal Capital Territory, Abuja where large numbers of building projects are being procured. The findings revealed six most commonly considered criteria and deduced that, the quality, cost and duration of the project determines the type of procurement method to adopt. It is therefore stated that in selecting any particular procurement method for building construction projects, the complexity of such project should be clearly defined and the other performance indicators be given adequate consideration for a successful project delivery that will enhance the achievement of the client’s goal.

  15. Subsurface arrangement constraints and selection criteria SOW, 4.5.1.2.1: Technical report, Revision 0

    International Nuclear Information System (INIS)

    1984-12-01

    The United States Department of Energy has the responsibility to develop an underground geological repository for the storage and isolation of nuclear waste. This report identifies design constraints and subsurface arrangement selection criteria for the subsurface portion of a repository in salt. These criteria provide a base from which subsurface layout will be selected for approval by the Department of Energy. This document provides the basic criteria for the architect/engineer to select the subsurface layout. While this document does not address site-specific criteria, it does act as a guideline for subsurface design allowing for exploration of any reasonable option of that design. The criteria developed in this report address specific areas and concerns within a subsurface layout plan. The subsurface layout selection criteria were developed from industry standards, federal regulations, and quality assurance standards. 18 refs., 7 figs., 5 tabs

  16. A multi-criteria decision making approach for the selection of a flexible packaging equipment

    Directory of Open Access Journals (Sweden)

    Cristea Ciprian

    2017-01-01

    Full Text Available Flexible packaging is one of the fastest growing segments of the packaging industry, combining paper, plastic film and aluminum foil to deliver a broad array of products for food and beverage, personal care products, and pharmaceutical industries. In order to preserve the quality and safety of the product contained in them, there are currently a variety of flexible packaging equipment options available. However their relative costs and performance differ. This study proposes an application of a ranking methodology to assess a selection of the most suitable flexible packaging equipment. The adequate criteria in the selection of equipment have been identified, and the considered options are assessed, considering the decision maker’s preferences and existing constraints. The options are ranked in terms of their suitability for selecting equipment by using the Electre III method. The results obtained from the simulation experiment highlight the effectiveness of the model in outranking different options in the process of equipment selection.

  17. Selection of boron based tribological hard coatings using multi-criteria decision making methods

    International Nuclear Information System (INIS)

    Çalışkan, Halil

    2013-01-01

    Highlights: • Boron based coating selection problem for cutting tools was solved. • EXPROM2, TOPSIS and VIKOR methods were used for ranking the alternative materials. • The best coatings for cutting tool were selected as TiBN and TiSiBN. • The ranking results are in good agreement with cutting test results in literature. - Abstract: Mechanical and tribological properties of hard coatings can be enhanced using boron as alloying element. Therefore, multicomponent nanostructured boron based hard coatings are deposited on cutting tools by different methods at different parameters. Different mechanical and tribological properties are obtained after deposition, and it is a difficult task to select the best coating material. In this paper, therefore, a systematic evaluation model was proposed to tackle the difficulty of the material selection with specific properties among a set of available alternatives. The alternatives consist of multicomponent nanostructured TiBN, TiCrBN, TiSiBN and TiAlSiBN coatings deposited by magnetron sputtering and ion implantation assisted magnetron sputtering at different parameters. The alternative coating materials were ranked by using three multi-criteria decision-making (MCDM) methods, i.e. EXPROM2 (preference ranking organization method for enrichment evaluation), TOPSIS (technique for order performance by similarity to ideal solution) and VIKOR (VIšekriterijumsko KOmpromisno Rangiranje), in order to determine the best coating material for cutting tools. Hardness (H), Young’s modulus (E), elastic recovery, friction coefficient, critical load, H/E and H 3 /E 2 ratios were considered as material selection criteria. In order to determine the importance weights of the evaluation criteria, a compromised weighting method, which composes of the analytic hierarchy process and Entropy methods, were used. The ranking results showed that TiBN and TiSiBN coatings deposited at given parameters are the best coatings for cutting tools

  18. Supplier selection criteria for sustainable supply chain management in thermal power plant

    Science.gov (United States)

    Firoz, Faisal; Narayan Biswal, Jitendra; Satapathy, Suchismita

    2018-02-01

    Supplies are always in great demand when it comes to industrial operations. The quality of raw material their price accompanied by sustainability and environmental effects are a major concern for industrial operators these days. Supply Chain Management is the subject which is focused on how the supply of different products is carried out. The motive is that each operation performed can be optimized and inherently the efficiency of the whole chain is integrated. In this paper we will be dealing with all the criteria that are required to be evaluated before selecting a supplier, in particular, focusing on Thermal Power Plant. The most suppliers of the thermal power plant are the coal suppliers. The quality of coal directly determines the efficiency of the whole plant. And when there are matters concerning coal environmental pollution plays a very crucial role. ANP method has been used here to select suppliers of thermal power sectors in Indian context. After applying ANP to prioritize the sustainable supplier selection criteria, it is found that for thermal power industries best suppliers are Nationalized/State owned suppliers then 2nd ranked suppliers are imported supplier. Private owned suppliers are ranked least. So private owned suppliers must be more concerned about their performance. Among these suppliers it is found that to compete in the global market privatized suppliers have to give more emphasize on most important criteria like sustainability, then fuel cost and quality. Still some sub-criteria like a clean program, environmental issues, quality, reliability, service rate, investment in high technology, green transportation channel, waste management etc needs for continuous improvement as per their priority.

  19. Inflammatory markers as selection criteria of hepatocellular carcinoma in living-donor liver transplantation.

    Science.gov (United States)

    Na, Gun Hyung; Kim, Dong Goo; Han, Jae Hyun; Kim, Eun Young; Lee, Soo Ho; Hong, Tae Ho; You, Young Kyoung

    2014-06-07

    To investigate that inflammatory markers can predict accurately the prognosis of hepatocelluar carcinoma (HCC) patients in living-donor liver transplantation (LDLT). From October 2000 to November 2011, 224 patients who underwent living donor liver transplantation for HCC at our institution were enrolled in this study. We analyzed disease-free survival (DFS) and overall survival (OS) after LT in patients with HCC and designed a new score model using pretransplant neutrophil-lymphocyte ratio (NLR) and C-reactive protein (CRP). The DFS and OS in patients with an NLR level ≥ 6.0 or CRP level ≥ 1.0 were significantly worse than those of patients with an NLR level < 6.0 or CRP level < 1.0 (P = 0.049, P = 0.003 for NLR and P = 0.010, P < 0.001 for CRP, respectively). Using a new score model using the pretransplant NLR and CRP, we can differentiate HCC patients beyond the Milan criteria with a good prognosis from those with a poor prognosis. Combined with the Milan criteria, new score model using NLR and CRP represent new selection criteria for LDLT candidates with HCC, especially beyond the Milan criteria.

  20. Methodology for Selecting Best Management Practices Integrating Multiple Stakeholders and Criteria. Part 2: Case Study

    Directory of Open Access Journals (Sweden)

    Mauricio Carvallo Aceves

    2016-02-01

    Full Text Available The selection of stormwater Best Management Practices (BMPs for mitigating the effects of urbanization on the hydrological cycle could be a complex process due to conflicting stakeholder views, and varying levels of performance of BMPs across a range of criteria (runoff reduction, erosion control, etc.. Part 1 of this article proposed a methodology based on the application of multi-criteria decision aid (MCDA methods, which was tested here on a residential stormwater network in the Montreal area. The case study considered green roofs, rain gardens, rain barrels and pervious pavement over a range of economic, social, and water quality and quantity criteria by applying 4 MCDA methods under three different stakeholder views. The results indicated Elimination et Choix Traduisant la Réalité (ELECTRE III to be the most appropriate method for the methodology, presenting flexibility concerning threshold values, criteria weights, and showing shared top choices across stakeholders (rain gardens, and rain gardens in combination with pervious pavement. The methodology shows potential for more formal applications and research opportunities. Future work may lie in the inclusion of multiple objective optimization, better stakeholder engagement, estimation of economic benefits, water quality modeling, long-term hydrological simulations, and estimating real BMP pollutant removal rates.

  1. South African medical schools: Current state of selection criteria and medical students' demographic profile.

    Science.gov (United States)

    van der Merwe, L J; van Zyl, G J; St Clair Gibson, A; Viljoen, M; Iputo, J E; Mammen, M; Chitha, W; Perez, A M; Hartman, N; Fonn, S; Green-Thompson, L; Ayo-Ysuf, O A; Botha, G C; Manning, D; Botha, S J; Hift, R; Retief, P; van Heerden, B B; Volmink, J

    2015-12-16

    Selection of medical students at South African (SA) medical schools must promote equitable and fair access to students from all population groups, while ensuring optimal student throughput and success, and training future healthcare practitioners who will fulfil the needs of the local society. In keeping with international practices, a variety of academic and non-academic measures are used to select applicants for medical training programmes in SA medical schools. To provide an overview of the selection procedures used by all eight medical schools in SA, and the student demographics (race and gender) at these medical schools, and to determine to what extent collective practices are achieving the goals of student diversity and inclusivity. A retrospective, quantitative, descriptive study design was used. All eight medical schools in SA provided information regarding selection criteria, selection procedures, and student demographics (race and gender). Descriptive analysis of data was done by calculating frequencies and percentages of the variables measured. Medical schools in SA make use of academic and non-academic criteria in their selection processes. The latter include indices of socioeconomic disadvantage. Most undergraduate medical students in SA are black (38.7%), followed by white (33.0%), coloured (13.4%) and Indian/Asian (13.6%). The majority of students are female (62.2%). The number of black students is still proportionately lower than in the general population, while other groups are overrepresented. Selection policies for undergraduate medical programmes aimed at redress should be continued and further refined, along with the provision of support to ensure student success.

  2. Analysis of Multi-Criteria Evaluation Method of Landfill Site Selection for Municipal Solid Waste Management

    Science.gov (United States)

    Mohammed, Habiba Ibrahim; Majid, Zulkepli; Yusof, Norhakim Bin; Bello Yamusa, Yamusa

    2018-03-01

    Landfilling remains the most common systematic technique of solid waste disposal in most of the developed and developing countries. Finding a suitable site for landfill is a very challenging task. Landfill site selection process aims to provide suitable areas that will protect the environment and public health from pollution and hazards. Therefore, various factors such as environmental, physical, socio-economic, and geological criteria must be considered before siting any landfill. This makes the site selection process vigorous and tedious because it involves the processing of large amount of spatial data, rules and regulations from different agencies and also policy from decision makers. This allows the incorporation of conflicting objectives and decision maker preferences into spatial decision models. This paper particularly analyzes the multi-criteria evaluation (MCE) method of landfill site selection for solid waste management by means of literature reviews and surveys. The study will help the decision makers and waste management authorities to choose the most effective method when considering landfill site selection.

  3. Analysis of Multi-Criteria Evaluation Method of Landfill Site Selection for Municipal Solid Waste Management

    Directory of Open Access Journals (Sweden)

    Ibrahim Mohammed Habiba

    2018-01-01

    Full Text Available Landfilling remains the most common systematic technique of solid waste disposal in most of the developed and developing countries. Finding a suitable site for landfill is a very challenging task. Landfill site selection process aims to provide suitable areas that will protect the environment and public health from pollution and hazards. Therefore, various factors such as environmental, physical, socio-economic, and geological criteria must be considered before siting any landfill. This makes the site selection process vigorous and tedious because it involves the processing of large amount of spatial data, rules and regulations from different agencies and also policy from decision makers. This allows the incorporation of conflicting objectives and decision maker preferences into spatial decision models. This paper particularly analyzes the multi-criteria evaluation (MCE method of landfill site selection for solid waste management by means of literature reviews and surveys. The study will help the decision makers and waste management authorities to choose the most effective method when considering landfill site selection.

  4. Application of multi-criteria material selection techniques to constituent refinement in biobased composites

    International Nuclear Information System (INIS)

    Miller, Sabbie A.; Lepech, Michael D.; Billington, Sarah L.

    2013-01-01

    Highlights: • Biobased composites have the potential to replace certain engineered materials. • Woven reinforcement can provide better material properties in biobased composites. • Short fiber filler can provide lower environmental impact in biobased composites. • Per function, different fibers are desired to lower composite environmental impact. - Abstract: Biobased composites offer a potentially low environmental impact material option for the construction industries. Designing these materials to meet both performance requirements for an application and minimize environmental impacts requires the ability to refine composite constituents based on environmental impact and mechanical properties. In this research, biobased composites with varying natural fiber reinforcement in a poly(β-hydroxybutyrate)-co-(β-hydroxyvalerate) matrix were characterized based on material properties through experiments and environmental impact through life cycle assessments. Using experimental results, these biobased composites were found to have competitive flexural properties and thermal conductivity with certain short-chopped glass fiber reinforced plastics. Multi-criteria material selection techniques were applied to weigh desired material properties with greenhouse gas emissions, fossil fuel demand, and Eco-Indicator ’99 score. The effects of using different reinforcing fibers in biobased composites were analyzed using the developed selection scheme as a tool for choosing constituents. The use of multi-criteria material selection provided the ability to select fiber reinforcement for biobased composites and showed when it would be more appropriate to use a novel biobased composite or a currently available engineered material

  5. Criteria for validation and selection of cognitive tests for investigating the effects of foods and nutrients.

    Science.gov (United States)

    de Jager, Celeste A; Dye, Louise; de Bruin, Eveline A; Butler, Laurie; Fletcher, John; Lamport, Daniel J; Latulippe, Marie E; Spencer, Jeremy P E; Wesnes, Keith

    2014-03-01

    This review is an output of the International Life Sciences Institute (ILSI) Europe Marker Initiative, which aims to identify evidence-based criteria for selecting adequate measures of nutrient effects on health through comprehensive literature review. Experts in cognitive and nutrition sciences examined the applicability of these proposed criteria to the field of cognition with respect to the various cognitive domains usually assessed to reflect brain or neurological function. This review covers cognitive domains important in the assessment of neuronal integrity and function, commonly used tests and their state of validation, and the application of the measures to studies of nutrition and nutritional intervention trials. The aim is to identify domain-specific cognitive tests that are sensitive to nutrient interventions and from which guidance can be provided to aid the application of selection criteria for choosing the most suitable tests for proposed nutritional intervention studies using cognitive outcomes. The material in this review serves as a background and guidance document for nutritionists, neuropsychologists, psychiatrists, and neurologists interested in assessing mental health in terms of cognitive test performance and for scientists intending to test the effects of food or food components on cognitive function.

  6. Improved selection criteria for H II regions, based on IRAS sources

    Science.gov (United States)

    Yan, Qing-Zeng; Xu, Ye; Walsh, A. J.; Macquart, J. P.; MacLeod, G. C.; Zhang, Bo; Hancock, P. J.; Chen, Xi; Tang, Zheng-Hong

    2018-05-01

    We present new criteria for selecting H II regions from the Infrared Astronomical Satellite (IRAS) Point Source Catalogue (PSC), based on an H II region catalogue derived manually from the all-sky Wide-field Infrared Survey Explorer (WISE). The criteria are used to augment the number of H II region candidates in the Milky Way. The criteria are defined by the linear decision boundary of two samples: IRAS point sources associated with known H II regions, which serve as the H II region sample, and IRAS point sources at high Galactic latitudes, which serve as the non-H II region sample. A machine learning classifier, specifically a support vector machine, is used to determine the decision boundary. We investigate all combinations of four IRAS bands and suggest that the optimal criterion is log(F_{60}/F_{12})≥ ( -0.19 × log(F_{100}/F_{25})+ 1.52), with detections at 60 and 100 {μ}m. This selects 3041 H II region candidates from the IRAS PSC. We find that IRAS H II region candidates show evidence of evolution on the two-colour diagram. Merging the WISE H II catalogue with IRAS H II region candidates, we estimate a lower limit of approximately 10 200 for the number of H II regions in the Milky Way.

  7. Determination of Some Quality Criteria of the Kefir Produced with Molasses and Plum

    Directory of Open Access Journals (Sweden)

    Tuğba Kök Taş

    2014-02-01

    Full Text Available The aim of this study is to determine the quality characteristics of kefir by developing different flavours in order to increase its consumption. Plum (10% and molasses (7.5% which are rich in phenolic contents are used to produce kefir in different flavours. Chemical analysis (pH, titratable acidity, dry matter and colour, microbial analysis (total microorganism, Lactobacillus spp, Lactococcus spp. and yeast counts, total antioxidant activity (by ORAC method, total amount of phenolic contents and sensorial properties of all kefir samples were carried out at the 1st, 7th and 14th days of storage. Consequently, the results of pH, titratable acidity and dry matter in the kefir samples were determined to change between the values 4.11-4.39; 0.22-0.30 and 11.9-17.02% respectively, during the storage. In the colour analysis, the redness colour parameter of the kefir sample produced using molasses was determined to be higher compared to the other kefir samples. At the first day of storage, the total antioxidant contents of the control group kefir, plum- added kefir and molasses-added kefir samples were determined as 13.30; 16.80 and 17.35 µmol ml-1; and the total phenolic contents as 945.70; 2535.8 and 2357.6 mg ml-1, respectively. Content of total microorganism in kefir samples varied between 8.91-9.80 log kob ml-1during the storage period. Lactobacillus spp. and Lactococcus spp. contents of kefir produced using molasses were determined to have the highest values with 9.11 and 9.91 log kob ml-1, respectively, at the first day. Yeast content of the plum kefir and the molasses kefir samples including sugar was detected to be higher than that of the controlled kefir sample. According to the results of the sensory analysis, the kefir produced with plum was approved the most by the panelists. As a result of this study, two alternative products with quite high total phenolic content and antioxidant activity were developed for consumers.

  8. A review of multi-criteria decision making techniques for supplier evaluation and selection

    Directory of Open Access Journals (Sweden)

    Prince Agarwal

    2011-10-01

    Full Text Available Supplier evaluation and selection has been a vital issue of strategic importance for long time. Different multi-criteria decision making (MCDM approaches have been proposed by the researchers in past, to solve the supplier evaluation and selection problem. In this paper, we present a review of various MCDM methodologies reported in the literature for solving the supplier evaluation and selection process. The review is solely based on sixty-eight research articles, including eight review articles in the academic literature from 2000 to 2011. We try to find out the most prevalent approach in the articles and thereby present the future scope of arriving at an optimal solution to the problem, based on the specifications, the strategies and the requirements of the buyers. The study presents that with the change in processes and the requirements, how the approach of the manufacturing industry has shifted from striving for operational effectiveness to the strategic partnership in the dyadic relationship.

  9. Fine mapping quantitative trait loci under selective phenotyping strategies based on linkage and linkage disequilibrium criteria

    DEFF Research Database (Denmark)

    Ansari-Mahyari, S; Berg, P; Lund, M S

    2009-01-01

    disequilibrium-based sampling criteria (LDC) for selecting individuals to phenotype are compared to random phenotyping in a quantitative trait loci (QTL) verification experiment using stochastic simulation. Several strategies based on LAC and LDC for selecting the most informative 30%, 40% or 50% of individuals...... for phenotyping to extract maximum power and precision in a QTL fine mapping experiment were developed and assessed. Linkage analyses for the mapping was performed for individuals sampled on LAC within families and combined linkage disequilibrium and linkage analyses was performed for individuals sampled across...... the whole population based on LDC. The results showed that selecting individuals with similar haplotypes to the paternal haplotypes (minimum recombination criterion) using LAC compared to random phenotyping gave at least the same power to detect a QTL but decreased the accuracy of the QTL position. However...

  10. Characterization of Emissions from Building Products: Selection Criteria, Storage and Handling of Indoor Materials for Experiments

    DEFF Research Database (Denmark)

    Kjær, Ulla Dorte; Nielsen, Peter A.; Marcussen, Lis

    1996-01-01

    In research projects it is usually impossible to study more than a very limited aount of different products. Care and consideration must therefore be taken in the selection. The following criteria were used to select five products for chemical and sensory emission testing: The products should...... be indoor climate relevant, meaning that they should be in direct contact with indoor air when used in buildings, and their emission should contribute significantly to the indoor air concentrations for instance due to a large surface area. They should be representative in terms of being widely used, now...... that the emission mechanisms do not change as a consequence of physical processes or chemical reactions. The five products selected were PVC flooring, waterborne varnish on beechwood parquet, carpet, sealant, and waterborne paint on gypsum board. The products were brought to the laboratory immediately after...

  11. Effects of crude humin and compost produced from selected waste ...

    African Journals Online (AJOL)

    Waste from oil palm plantations, paddy fields, sawn timber and poultries are substantial. Inappropriate disposal of these wastes can cause environmental problems such as air and land pollutions. The objective of this study was to determine the effect of crude humin and compost produced from rice straw, rice husk, sawdust, ...

  12. Application of ecological criteria in selecting marine reserves and developing reserve networks

    Science.gov (United States)

    Roberts, Callum M.; Branch, George; Bustamante, Rodrigo H.; Castilla, Juan Carlos; Dugan, Jenifer; Halpern, Benjamin S.; Lafferty, Kevin D.; Leslie, Heather; McArdle, Deborah; Ruckelshaus, Mary; Warner, Robert R.

    2003-01-01

    Marine reserves are being established worldwide in response to a growing recognition of the conservation crisis that is building in the oceans. However, designation of reserves has been largely opportunistic, or protective measures have been implemented (often overlapping and sometimes in conflict) by different entities seeking to achieve different ends. This has created confusion among both users and enforcers, and the proliferation of different measures provides a false sense of protection where little is offered. This paper sets out a procedure grounded in current understanding of ecological processes, that allows the evaluation and selection of reserve sites in order to develop functional, interconnected networks of fully protected reserves that will fulfill multiple objectives. By fully protected we mean permanently closed to fishing and other resource extraction. We provide a framework that unifies the central aims of conservation and fishery management, while also meeting other human needs such as the provision of ecosystem services (e.g., maintenance of coastal water quality, shoreline protection, and recreational opportunities). In our scheme, candidate sites for reserves are evaluated against 12 criteria focused toward sustaining the biological integrity and productivity of marine systems at both local and regional scales. While a limited number of sites will be indispensable in a network, many will be of similar value as reserves, allowing the design of numerous alternative, biologically adequate networks. Devising multiple network designs will help ensure that ecological functionality is preserved throughout the socioeconomic evaluation process. Too often, socioeconomic criteria have dominated the process of reserve selection, potentially undermining their efficacy. We argue that application of biological criteria must precede and inform socioeconomic evaluation, since maintenance of ecosystem functioning is essential for meeting all of the goals for

  13. Quality Attributes of Fresh Palm Oils Produced from Selected ...

    African Journals Online (AJOL)

    The oils were analyzed for their physical (refractive index, impurities, density, smoke point, flash point and fire point) and chemical (moisture, free fatty acids, peroxide value, saponification value iodine value and unsaponificable matter) qualities using standard methods. Palm oil processors in the selected communities were ...

  14. A multi-criteria decision-making approach to rank supplier selection criteria for hospital waste management: A case from Pakistan.

    Science.gov (United States)

    Ishtiaq, Palvisha; Khan, Sharfuddin Ahmed; Haq, Moiz-Ul

    2018-04-01

    To address environmental issues and cost effectiveness, waste management is necessary for healthcare facilities. Most importantly, segregation of hazardous and non-hazardous waste must be done as in many developing countries; disposal of both types of healthcare waste is done together, which is an unsafe practice. Waste generated in hospitals needs proper management to minimise hazards for patient and healthcare workers. At the same time, it is quite difficult for hospitals to find a systematic way to select appropriate suppliers for hospital waste management. Therefore, the purpose of this article is to identify, validate, and rank criteria that are essential for hospital waste management suppliers' selection. The analytical hierarchal process approach has been used and a survey from Pakistan's largest city (Karachi) has been considered to rank the most appropriate criteria that is necessary to select the supplier, especially in a developing country like Pakistan. Results show that waste management cost (45.5%) and suppliers' details (31.5%) are the top two main criteria for supplier selection; and storage cost (15.7%), waste handling cost (14.7%), and qualification of the suppliers (10.9%) are the top three most important overall sub-criteria for supplier selection for hospital waste management.

  15. Exogenous cellulases of thermophilic micromycetes. Pt. 1. Selection of producers

    Energy Technology Data Exchange (ETDEWEB)

    Kvesitadze, G; Kvachadze, L; Aleksidze, T; Chartishvili, D K

    1986-01-01

    More than 600 micromycetes - representatives of different genera have been investigated for their ability to produce exogenous cellulases. Most of the investigated cultures were found to produce these enzymes, 24 cultures being thermophilic, and 18 thermotolerant. Cellulase or its derivatives proved to be the most favourable carbon source for cellulase secretion. None of the thermophilic cultures studied manifested the ability of exogenous exoglucanase biosynthesis. Using UV-rays as mutagen, a mutant strain A. terreus T-49 has been obtained being characterized by an increased endo-glucanase and cellobiase activity, as compared to the initial strains. The cellulase preparations of thermophilic micromycetes contain one cellulasic component: endo-glucanase, or two: endo-glucanase and cellobiase.

  16. CLOTHING BUYING MOTIVES AND STORE SELECTION CRITERIA – THE CASE OF CROATIAN ADOLESCENTS

    Directory of Open Access Journals (Sweden)

    Blaženka Knežević

    2016-12-01

    Full Text Available The aim of this paper is to analyse Croatian adolescents’ clothing buying motives and their retail store selection criteria. The paper examined their preferences, attitudes and behaviours when buying clothes - whether adolescents with different primary clothing motives would have similar or different store selection criteria. Also, the paper determined how today’s adolescents spend money on clothes and whether they are more inclined to purchase branded clothes or not. Finally, the paper explained whether Croatian adolescents prefer purchasing in small or large specialized apparel stores, or whether they are more prone to online purchasing or even buying clothes in second-hand shops. Also, the society influences in forming adolescents’ attitudes and decisions towards store selection and purchasing preferences of clothes were examined. The research findings showed that shopping centres are the preferred retail format. In addition, adolescents do not have a fully developed attitude on fashion and clothing. Therefore, they strongly refer to opinions of family and friends when choosing clothes. Moreover, the Internet and TV are evaluated as influential channels of consumer communication within this particular group of consumers. Based on the findings, suggestions for service management and marketing strategies are provided for apparel retail companies that target adolescents.

  17. Criteria of selection of basic linguacultural units within the context of cross-cultural communication

    Directory of Open Access Journals (Sweden)

    Khalupo Olga Ivanovna

    2016-03-01

    Full Text Available The article considers the problems associated with the analysis and selection of basic linguacultural units that are necessary for a more effective cross-cultural communication. To make the process of dialogue between different cultures and languages more appropriate and productive, it is necessary to possess certain knowledge, skills, which are acquired by man in the process of learning. Important in our opinion in this area are the mastery means which will prepare the person to communicate in a different communicative space. Such means, in our opinion, are the basic linguacultural units, which are considered as carriers of information and expression of cultural identity. They inform choice contributes to a worldview, understanding linguacultural picture of the world community. The basis of selection of linguistic units on the following criteria: the information content, functionality, sufficiency, cultural identity, realism, pivotal importance to the basic sense, social and cultural significance. Application of the proposed criteria allowing more appropriate to make the selection of the material and linguacultural integral components of the scope of cross-cultural interaction, which are characterized by their relevant material necessary for an adequate understanding of the processes occurring in different communicative space.

  18. Application of multi-criteria decision analysis in selecting of sustainable investments

    Science.gov (United States)

    Kozik, Renata

    2017-07-01

    Investors of construction projects, especially financed with public money, quite slowly adapt environmentally friendly solutions, e.g. passive buildings. Practice shows that the use of green public procurement among the public investors is negligible. Energy-saving technologies and equipment are expensive at the construction phase and investors less or not at all take into account the future operating costs. The aim of this article is to apply the method of multi-criteria analysis ELECTRE to select the best investment in terms of cost of implementation, operation, as well as the impact on the environment.

  19. Selection and specification criteria for fills for cut-and-fill mining

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, E. G.

    1980-05-15

    Because of significant differences in placement and loading conditions, the ideal fill material for a cut-and-fill operation has different characteristics to those for a fill for a filled open stoping operation. The differing requirements of the two mining operations must be understood and accounted for in establishing fill selection and specification criteria. Within the paper, aspects of the particular requirements of cut-and-fill mining are analyzed and related to the specific fill tests and properties required. Emphasis is placed upon the role of fill in ground support, though this cannot be isolated from overall fill performance. Where appropriate, test data are introduced and areas requiring continuing research highlighted.

  20. CRITERIA OF LANGUAGE AND PROGRAMMING ENVIRONMENT SELECTION FOR USE IN THE CAPACITY OF EDUCATIONAL AIDS

    Directory of Open Access Journals (Sweden)

    Petro H. Shevchuk

    2010-09-01

    Full Text Available The role of educational aids is to a large degree treated to be determinative in provision with its efficiency. The languages and programming environments are stated in the article as those that belong to educational aids. The criteria and backgrounds of their selection for educational purpose at the lessons of programming at comprehensive school are treated in the article. The examples of principle characteristics comparison of Pascal and C# are also cited. The article points at the necessity of further analysis of programming languages sampling for use as educational aids in teaching programming.

  1. Using multi-criteria decision methods for selecting a language school

    Directory of Open Access Journals (Sweden)

    Mileine Henriques Elias Velasco

    2014-11-01

    Full Text Available Nowadays, the interest of organizations by professionals who have deep knowledge concerning more than one language has been increasing. In this scenario, the choice of a language school has been one of the most common decision problems, which has been often made on the basis of word-of-mouth, marketing activities of schools and trials without criteria. In order to contribute to this problem, this paper presents a study in which two multi-criteria decision aid methods (AHP and Weighted Average were used to select a language school. Thus, the degree of importance of criteria relating to the problem and the degree of satisfaction of undergraduate and postgraduate students in relation to language schools they study were taken into account. The best ranked language school was the same for both MCDA methods, although some schools have obtained different positions. It was found that the analysis with AHP is richer and more elaborate than with the Weighted Average method. However, the large number of pairwise comparisons which were required to the study demanded significant attention and cognitive effort from the decision maker, and more time to perform the analysis - aspects that may contribute to the preference for the Weighted Average method in similar studies.

  2. Development of a novel set of criteria to select methodology for designing product service systems

    Directory of Open Access Journals (Sweden)

    Tuananh Tran

    2016-04-01

    Full Text Available This paper proposes eight groups of twenty nine scoring criteria that can help designers and practitioners to compare and select an appropriate methodology for a certain problem in designing product service system (PSS. PSS has been researched for more than a decade and is now becoming more and more popular in academia as well as industry. Despite that fact, the adoption of PSS is still limited for its potential. One of the main reasons is that designing PSS itself is a challenge. Designers and developers face difficulties in choosing appropriate PSS design methodologies for their projects so that they can design effective PSS offerings. By proposing eight groups of twenty nine scoring criteria, this paper enables a “step by step” process to identify the most appropriate design methodology for a company’s PSS problem. An example is also introduced to illustrate the use of the proposed scoring criteria and provide a clear picture of how different design methodologies can be utilized at their best in terms of application.

  3. ASYMMETRIC PRICE TRANSMISSION MODELING: THE IMPORTANCE OF MODEL COMPLEXITY AND THE PERFORMANCE OF THE SELECTION CRITERIA

    Directory of Open Access Journals (Sweden)

    Henry de-Graft Acquah

    2013-01-01

    Full Text Available Information Criteria provides an attractive basis for selecting the best model from a set of competing asymmetric price transmission models or theories. However, little is understood about the sensitivity of the model selection methods to model complexity. This study therefore fits competing asymmetric price transmission models that differ in complexity to simulated data and evaluates the ability of the model selection methods to recover the true model. The results of Monte Carlo experimentation suggest that in general BIC, CAIC and DIC were superior to AIC when the true data generating process was the standard error correction model, whereas AIC was more successful when the true model was the complex error correction model. It is also shown that the model selection methods performed better in large samples for a complex asymmetric data generating process than with a standard asymmetric data generating process. Except for complex models, AIC's performance did not make substantial gains in recovery rates as sample size increased. The research findings demonstrate the influence of model complexity in asymmetric price transmission model comparison and selection.

  4. Determination of Effective Criteria for location Selection of WPC Plants from agricultural residues in Iran by AHP Technique

    Directory of Open Access Journals (Sweden)

    hasan alizadeh

    2017-02-01

    Full Text Available This study was aimed at determining the effective criteria for location selection of WPC Plants from agricultural residues in Iran. For this purpose, after review and studies papers and books, Six criteria" products and materials, regulations, technical and human, economic, infrastructure and environmental and also 30 sub-criteria were identified. The priority rates of these criteria and sub-criteria were evaluated by AHP technique. The results indicated that among 30 effective sub-criteria in location selection of the WPC plants from agricultural residues, amount of wastes supply (0.087, continuity of wastes supply, cost of wastes supply, amount of sales and export, granted facilities and less Hazards for the environment and forest had the highest priorities, which were rated as 0.071, 0.067, 0.065, 0.064 and 0.062 respectively.

  5. Psychophysiological and psychological criteria for professional selection of reactor operators - a review

    International Nuclear Information System (INIS)

    Jonkova, A.

    1992-01-01

    The professional activity of reactor operators is determined according to some modern classification schemes. The NPP operation staff's classification containing groups of operators-supervisors, operators-manipulators and operators-managers (Zinchenko and Munipov) is discussed. The author specifies the functions of the operators-supervisors in more detail. The requirements for selection of operators are given and the significance of mind, memory, attention, differentiative sensomotorics, emotional and stress-stability is emphasized. An own set of criteria for professional selection of reactor operators is proposed based on the definition of reliability concepts -adequacy, timeliness and lack of outages. The requirements for psychological structure of personality are well-grounded also by the collective character of this kind of professional activity also. 28 refs., 1 fig. (A.B.)

  6. Multi criteria decision making methods for location selection of distribution centers

    Directory of Open Access Journals (Sweden)

    Romita Chakraborty

    2013-10-01

    Full Text Available In recent years, major challenges such as, increase in inflexible consumer demands and to improve the competitive advantage, it has become necessary for various industrial organizations all over the world to focus on strategies that will help them achieve cost reduction, continual quality improvement, increased customer satisfaction and on time delivery performance. As a result, selection of the most suitable and optimal facility location for a new organization or expansion of an existing location is one of the most important strategic issues, required to fulfill all of these above mentioned objectives. In order to sustain in the global competitive market of 21st century, many industrial organizations have begun to concentrate on the proper selection of the plant site or best facility location. The best location is that which results in higher economic benefits through increased productivity and good distribution network. When a choice is to be made from among several alternative facility locations, it is necessary to compare their performance characteristics in a decisive way. As the facility location selection problem involves multiple conflicting criteria and a finite set of potential candidate alternatives, different multi-criteria decision-making (MCDM methods can be effectively applied to solve such type of problem. In this paper, four well known MCDM methods have been applied on a facility location selection problem and their relative ranking performances are compared. Because of disagreement in the ranks obtained by the four different MCDM methods a final ranking method based on REGIME has been proposed by the authors to facilitate the decision making process.

  7. CCS site characterisation criteria

    Energy Technology Data Exchange (ETDEWEB)

    Bachu, S.; Hawkes, C.; Lawton, D.; Pooladi-Darvish, M.; Perkins, E.

    2009-12-15

    IEA GHG recently commissioned the Alberta Research Counil in Canada to conduct a review of storage site selection criteria and site characterisation methods in order to produce a synthesis report. This report reviews the literature on the subject on the site seleciton and characterisation since the publication of the IPCC Special Report on CCS, and provides a synthesis and classification of criteria. 161 refs.

  8. The Problem of Multiple Criteria Selection of the Surface Mining Haul Trucks

    Science.gov (United States)

    Bodziony, Przemysław; Kasztelewicz, Zbigniew; Sawicki, Piotr

    2016-06-01

    Vehicle transport is a dominant type of technological processes in rock mines, and its profit ability is strictly dependent on overall cost of its exploitation, especially on diesel oil consumption. Thus, a rational design of transportation system based on haul trucks should result from thorough analysis of technical and economic issues, including both cost of purchase and its further exploitation, having a crucial impact on the cost of minerals extraction. Moreover, off-highway trucks should be selected with respect to all specific exploitation conditions and even the user's preferences and experience. In this paper a development of universal family of evaluation criteria as well as application of evaluation method for haul truck selection process for a specific exploitation conditions in surface mining have been carried out. The methodology presented in the paper is based on the principles of multiple criteria decision aiding (MCDA) using one of the ranking method, i.e. ELECTRE III. The applied methodology has been allowed for ranking of alternative solution (variants), on the considered set of haul trucks. The result of the research is a universal methodology, and it consequently may be applied in other surface mines with similar exploitation parametres.

  9. Customers’ Perceptions on the Objectives, Characteristics and Selection Criteria of Islamic Bank in Thailand

    Directory of Open Access Journals (Sweden)

    Nasrina Lateh

    2009-05-01

    Full Text Available Due to relatively new establishment of islamic bank in Thailand and paucity of empirical research undertaken in the area, this study intends to capture the perceptions of Thai customers towards the objectives and characteristics of the islamic bank. In addition, this study aims to determine the important bank selection criteria as perceived by the customers and the differences in the perceptions of moslem and non-moslem customers were identified. The study surveys a sample of 462 respondents. The empirical findings show that the Thai customers know that the essential characteristic of the islamic bank is interest prohibition. They tend to support the idea that the islamic bank should strive to achieve its social objectives more than the commercial objectives. In addition, the results showed that there are differences between the Thai moslem and non-moslem customers’ preferences toward various bank selection criteria. The moslems highly considered the interest-free saving facilities, while the non-moslems tended to concern more about its reputation and image, and knowledgeable and competent personnel.

  10. Selection criteria utilized for hyperbaric oxygen treatment of carbon monoxide poisoning.

    Science.gov (United States)

    Hampson, N B; Dunford, R G; Kramer, C C; Norkool, D M

    1995-01-01

    Medical directors of North American hyperbaric oxygen (HBO) facilities were surveyed to assess selection criteria applied for treatment of acute carbon monoxide (CO) poisoning within the hyperbaric medicine community. Responses were received from 85% of the 208 facilities in the United States and Canada. Among responders, 89 monoplace and 58 multiplace chamber facilities treat acute CO poisoning, managing a total of 2,636 patients in 1992. A significant majority of facilities treat CO-exposed patients with coma (98%), transient loss of consciousness (LOC) (77%), ischemic changes on electrocardiogram (91%), focal neurologic deficits (94%), or abnormal psychometric testing (91%), regardless of carboxyhemoglobin (COHb) level. Although 92% would use HBO for a patient presenting with headache, nausea, and COHb 40%, only 62% of facilities utilize a specified minimum COHb level as the sole criterion for HBO therapy of an asymptomatic patient. When COHb is used as an independent criterion to determine HBO treatment, the level utilized varies widely between institutions. Half of responding facilities place limits on the delay to treatment for patients with only transient LOC. Time limits are applied less often in cases with persistent neurologic deficits. While variability exists, majority opinions can be derived for many patient selection criteria regarding the use of HBO in acute CO poisoning.

  11. The criteria for selecting a method for unfolding neutron spectra based on the information entropy theory

    International Nuclear Information System (INIS)

    Zhu, Qingjun; Song, Fengquan; Ren, Jie; Chen, Xueyong; Zhou, Bin

    2014-01-01

    To further expand the application of an artificial neural network in the field of neutron spectrometry, the criteria for choosing between an artificial neural network and the maximum entropy method for the purpose of unfolding neutron spectra was presented. The counts of the Bonner spheres for IAEA neutron spectra were used as a database, and the artificial neural network and the maximum entropy method were used to unfold neutron spectra; the mean squares of the spectra were defined as the differences between the desired and unfolded spectra. After the information entropy of each spectrum was calculated using information entropy theory, the relationship between the mean squares of the spectra and the information entropy was acquired. Useful information from the information entropy guided the selection of unfolding methods. Due to the importance of the information entropy, the method for predicting the information entropy using the Bonner spheres' counts was established. The criteria based on the information entropy theory can be used to choose between the artificial neural network and the maximum entropy method unfolding methods. The application of an artificial neural network to unfold neutron spectra was expanded. - Highlights: • Two neutron spectra unfolding methods, ANN and MEM, were compared. • The spectrum's entropy offers useful information for selecting unfolding methods. • For the spectrum with low entropy, the ANN was generally better than MEM. • The spectrum's entropy was predicted based on the Bonner spheres' counts

  12. Structured methodology review identified seven (RETREAT) criteria for selecting qualitative evidence synthesis approaches.

    Science.gov (United States)

    Booth, Andrew; Noyes, Jane; Flemming, Kate; Gerhardus, Ansgar; Wahlster, Philip; van der Wilt, Gert Jan; Mozygemba, Kati; Refolo, Pietro; Sacchini, Dario; Tummers, Marcia; Rehfuess, Eva

    2018-07-01

    To compare and contrast different methods of qualitative evidence synthesis (QES) against criteria identified from the literature and to map their attributes to inform selection of the most appropriate QES method to answer research questions addressed by qualitative research. Electronic databases, citation searching, and a study register were used to identify studies reporting QES methods. Attributes compiled from 26 methodological papers (2001-2014) were used as a framework for data extraction. Data were extracted into summary tables by one reviewer and then considered within the author team. We identified seven considerations determining choice of methods from the methodological literature, encapsulated within the mnemonic Review question-Epistemology-Time/Timescale-Resources-Expertise-Audience and purpose-Type of data. We mapped 15 different published QES methods against these seven criteria. The final framework focuses on stand-alone QES methods but may also hold potential when integrating quantitative and qualitative data. These findings offer a contemporary perspective as a conceptual basis for future empirical investigation of the advantages and disadvantages of different methods of QES. It is hoped that this will inform appropriate selection of QES approaches. Copyright © 2018 Elsevier Inc. All rights reserved.

  13. Coastal flooding as a parameter in multi-criteria analysis for industrial site selection

    Science.gov (United States)

    Christina, C.; Memos, C.; Diakoulaki, D.

    2014-12-01

    Natural hazards can trigger major industrial accidents, which apart from affecting industrial installations may cause a series of accidents with serious impacts on human health and the environment far beyond the site boundary. Such accidents, also called Na-Tech (natural - technical) accidents, deserve particular attention since they can cause release of hazardous substances possibly resulting in severe environmental pollution, explosions and/or fires. There are different kinds of natural events or, in general terms, of natural causes of industrial accidents, such as landslides, hurricanes, high winds, tsunamis, lightning, cold/hot temperature, floods, heavy rains etc that have caused accidents. The scope of this paper is to examine the coastal flooding as a parameter in causing an industrial accident, such as the nuclear disaster in Fukushima, Japan, and the critical role of this parameter in industrial site selection. Land use planning is a complex procedure that requires multi-criteria decision analysis involving economic, environmental and social parameters. In this context the parameter of a natural hazard occurrence, such as coastal flooding, for industrial site selection should be set by the decision makers. In this paper it is evaluated the influence that has in the outcome of a multi-criteria decision analysis for industrial spatial planning the parameter of an accident risk triggered by coastal flooding. The latter is analyzed in the context of both sea-and-inland induced flooding.

  14. Correlations between PANCE performance, physician assistant program grade point average, and selection criteria.

    Science.gov (United States)

    Brown, Gina; Imel, Brittany; Nelson, Alyssa; Hale, LaDonna S; Jansen, Nick

    2013-01-01

    The purpose of this study was to examine correlations between first-time Physician Assistant National Certifying Exam (PANCE) scores and pass/fail status, physician assistant (PA) program didactic grade point average (GPA), and specific selection criteria. This retrospective study evaluated graduating classes from 2007, 2008, and 2009 at a single program (N = 119). There was no correlation between PANCE performance and undergraduate grade point average (GPA), science prerequisite GPA, or health care experience. There was a moderate correlation between PANCE pass/fail and where students took science prerequisites (r = 0.27, P = .003) but not with the PANCE score. PANCE scores were correlated with overall PA program GPA (r = 0.67), PA pharmacology grade (r = 0.68), and PA anatomy grade (r = 0.41) but not with PANCE pass/fail. Correlations between selection criteria and PANCE performance were limited, but further research regarding the influence of prerequisite institution type may be warranted and may improve admission decisions. PANCE scores and PA program GPA correlations may guide academic advising and remediation decisions for current students.

  15. Chapter 3: detailed discussion on the site selection criteria; Capitulo 3: discussao detalhada dos criterios de selecao de sitio

    Energy Technology Data Exchange (ETDEWEB)

    Atala, Drausio Lima

    2009-07-01

    This chapter discusses full detail each selection criterion and their application. A certain degree of 'customization' can be necessary for each region of interest. Some criteria can be applied depending upon the situation. Some of those criteria can be modified due to the modification on the regulation, advances of the knowledge or specific conditions which can be introduced.

  16. Criteria for Selection and Rejection of Social Relationships among Children in Urban and Rural Kindergartens in Greece

    Science.gov (United States)

    Rekalidou, Galini; Petrogiannis, Konstantinos

    2012-01-01

    This paper reports on preschool children's social relationships developed in urban and rural kindergarten classes in Greece. We investigated the selection and rejection criteria children use and examined potential criteria differences as a function of a number of socio-demographic variables (children's age group, gender, parental job status,…

  17. 49 CFR Appendix C to Part 541 - Criteria for Selecting Light Duty Truck Lines Likely To Have High Theft Rates

    Science.gov (United States)

    2010-10-01

    ... Likely To Have High Theft Rates C Appendix C to Part 541 Transportation Other Regulations Relating to... MOTOR VEHICLE THEFT PREVENTION STANDARD Pt. 541, App. C Appendix C to Part 541—Criteria for Selecting Light Duty Truck Lines Likely To Have High Theft Rates Scope These criteria specify the factors the...

  18. Implementation of multi-criteria decision making approach for the team leader selection in IT sector

    Directory of Open Access Journals (Sweden)

    Sandhya

    2016-12-01

    Full Text Available In the era of technology, the demand of the software development increases at a very high speed, as software has touched the human’s life in all aspects. The better quality software development acquiring minimum development time leads to the team work in which a group of people has been formed that work together in a team for the software development. One of the most signifi-cant issues in effective and efficient teamwork is the team leader selection because the team lead-er is the person in any team that is going to handle all types of managerial activities such as lead-ership, motivation to others, etc. The team leader selection process may be dependent on numer-ous conflicting selection indexes that make it a Multi-Criteria Decision Making (MCDM prob-lem. In the present research, an MCDM approach namely, Euclidean Distance Based Approxi-mation (EDBA which is based on the calculation of the composite distance value for each alter-native from a hypothetical optimal point is presented. The result of this study provides a compre-hensive ranking of team leaders that leads to the right selection of team leader in information technology (IT sector.

  19. The evaluation of effective criteria on site selection for energy production units from cellulosic biomass in Iran

    Directory of Open Access Journals (Sweden)

    Majid Azizi

    2017-12-01

    Full Text Available Both Analytical Hierarchy Process (AHP and benefits, opportunities, costs and risks (BOCR techniques were used successfully to evaluate the effective criteria on site selection for energy production unit development from cellulosic biomass in Iran. The results showed that the benefits criteria was at the first level while the initial cellulosic raw materials and opportunities with the aim of the local economy had the second position as the most important indices on site selection. In addition, third criterion has been introduced for the costs criteria (transportation cost and social barriers by the experts. However, risks criteria which referred to instability of providing cellulosic raw materials is one of the less important effective indices on site selection to make energy production unit. The results illustrated that the economy and politics as two environmental effective factors affected on the site selection process generally.

  20. Novel Integrated Multi-Criteria Model for Supplier Selection: Case Study Construction Company

    Directory of Open Access Journals (Sweden)

    Željko Stević

    2017-11-01

    Full Text Available Supply chain presents a very complex field involving a large number of participants. The aim of the complete supply chain is finding an optimum from the aspect of all participants, which is a rather complex task. In order to ensure optimum satisfaction for all participants, it is necessary that the beginning phase consists of correct evaluations and supplier selection. In this study, the supplier selection was performed in the construction company, on the basis of a new approach in the field of multi-criteria model. Weight coefficients were obtained by DEMATEL (Decision Making Trial and Evaluation Laboratory method, based on the rough numbers. Evaluation and the supplier selection were made on the basis of a new Rough EDAS (Evaluation based on Distance from Average Solution method, which presents one of the latest methods in this field. In order to determine the stability of the model and the applicability of the proposed Rough EDAS method, an extension of the COPRAS and MULTIMOORA method by rough numbers was also performed in this study, and the findings of the comparative analysis were presented. Besides the new approaches based on the extension by rough numbers, the results are also compared with the Rough MABAC (MultiAttributive Border Approximation area Comparison and Rough MAIRCA (MultiAttributive Ideal-Real Comparative Analysis. In addition, in the sensitivity analysis, 18 different scenarios were formed, the ones in which criteria change their original values. At the end of the sensitivity analysis, SCC (Spearman Correlation Coefficient of the obtained ranges was carried out, confirming the applicability of the proposed approaches.

  1. Fuzzy Logic Based Multi-Criteria Wind Turbine Selection Strategy—A Case Study of Qassim, Saudi Arabia

    OpenAIRE

    Shafiqur Rehman; Salman A. Khan

    2016-01-01

    The emergence of wind energy as a potential alternative to traditional sources of fuel has prompted notable research in recent years. One primary factor contributing to efficient utilization of wind energy from a wind farm is the type of turbines used. However, selection of a specific wind turbine type is a difficult task due to several criteria involved in the selection process. Important criteria include turbine’s power rating, height of tower, energy output, rotor diameter, cut-in wind spe...

  2. Selecting essential information for biosurveillance--a multi-criteria decision analysis.

    Directory of Open Access Journals (Sweden)

    Nicholas Generous

    Full Text Available The National Strategy for Biosurveillance defines biosurveillance as "the process of gathering, integrating, interpreting, and communicating essential information related to all-hazards threats or disease activity affecting human, animal, or plant health to achieve early detection and warning, contribute to overall situational awareness of the health aspects of an incident, and to enable better decision-making at all levels." However, the strategy does not specify how "essential information" is to be identified and integrated into the current biosurveillance enterprise, or what the metrics qualify information as being "essential". The question of data stream identification and selection requires a structured methodology that can systematically evaluate the tradeoffs between the many criteria that need to be taken in account. Multi-Attribute Utility Theory, a type of multi-criteria decision analysis, can provide a well-defined, structured approach that can offer solutions to this problem. While the use of Multi-Attribute Utility Theoryas a practical method to apply formal scientific decision theoretical approaches to complex, multi-criteria problems has been demonstrated in a variety of fields, this method has never been applied to decision support in biosurveillance.We have developed a formalized decision support analytic framework that can facilitate identification of "essential information" for use in biosurveillance systems or processes and we offer this framework to the global BSV community as a tool for optimizing the BSV enterprise. To demonstrate utility, we applied the framework to the problem of evaluating data streams for use in an integrated global infectious disease surveillance system.

  3. Selecting essential information for biosurveillance--a multi-criteria decision analysis.

    Science.gov (United States)

    Generous, Nicholas; Margevicius, Kristen J; Taylor-McCabe, Kirsten J; Brown, Mac; Daniel, W Brent; Castro, Lauren; Hengartner, Andrea; Deshpande, Alina

    2014-01-01

    The National Strategy for Biosurveillance defines biosurveillance as "the process of gathering, integrating, interpreting, and communicating essential information related to all-hazards threats or disease activity affecting human, animal, or plant health to achieve early detection and warning, contribute to overall situational awareness of the health aspects of an incident, and to enable better decision-making at all levels." However, the strategy does not specify how "essential information" is to be identified and integrated into the current biosurveillance enterprise, or what the metrics qualify information as being "essential". The question of data stream identification and selection requires a structured methodology that can systematically evaluate the tradeoffs between the many criteria that need to be taken in account. Multi-Attribute Utility Theory, a type of multi-criteria decision analysis, can provide a well-defined, structured approach that can offer solutions to this problem. While the use of Multi-Attribute Utility Theoryas a practical method to apply formal scientific decision theoretical approaches to complex, multi-criteria problems has been demonstrated in a variety of fields, this method has never been applied to decision support in biosurveillance.We have developed a formalized decision support analytic framework that can facilitate identification of "essential information" for use in biosurveillance systems or processes and we offer this framework to the global BSV community as a tool for optimizing the BSV enterprise. To demonstrate utility, we applied the framework to the problem of evaluating data streams for use in an integrated global infectious disease surveillance system.

  4. Scarab/Saffron Development Project Case study: Material Selection Criteria for the Monoethylene Glycol Recovery Package

    International Nuclear Information System (INIS)

    Moussa, A.M.; Habib, S.; Shinaishin, A.

    2004-01-01

    MEG Recovery Unit for Scarab/Saffron development project is the first application in gas production. The Mono Ethylene Glycol Recovery Unit (MEG) recovers MEG from Water/MEG stream and removes salts and other contaminants. MEG Recovery Unit Equipment Design Criteria were designed for two parallel trains A and B, each train is capable to treat 500 bbl MEG, 1500 bbl water and 9 ton salt. The MEG unit is a combination of two unit operations; MEG Recovery unit is normally applicable in the oil and gas industries that is applying distillation technique, while the new technology is salt treatment and handling. The MEG Unit material selection is made to be suitable for the entire design life which is 25 years, the materials for MEG Recovery Unit have been selected among the available corrosion resistance alloys, where requested by the service and ambient conditions. Therefore all. the parts of the MEG unit that are in saline service are in either (2205 duplex, AISI 316L) and in Inconel alloy 625 related to operating temperature. This case study focused at Inconel alloy 625, which is selected for salt service and their operation problem occurred during the construction and operating conditions

  5. Political Criteria for Sustainable Development Goal (SDG Selection and the Role of the Urban Dimension

    Directory of Open Access Journals (Sweden)

    Manuel Rivera

    2013-11-01

    Full Text Available A flood of ideas and proposals on the shape and selection of Sustainable Development Goals (SDGs has begun to rise since 2012. This article looks at some of them, trying to understand which kind of “boundary work” between science and policy is done here. Starting with a reflection on the epistemological and practical implications of “discussing SDGs”, it primarily addresses scientists, but also decision makers and activists interested in the post-2015 debate. In practical terms of SDG selection, the argument goes in favor of a self-reflective “politization of science”; i.e., against claims for broad scientific comprehensiveness of SDGs and in favor of an “exemplary” selection of thematic areas and targets, which would combine aspects of (i political opportunity and (ii societal visibility. These criteria are only very partially met in the proposals the article looks at. By applying them, the article emphasizes the political importance of addressing, through SDGs, the subnational level directly, thus making the case for an SDG on cities. Such an SDG should, by the same logic, be rather focused and exemplary than all-encompassing. The recently employed formula of “resilient, inclusive and connected cities” is considered useful, when accompanied by tangible and communicable indicators.

  6. Gene and antigen markers of Shiga-toxin producing E. coli from Michigan and Indiana river water: Occurrence and relation to recreational water quality criteria

    Science.gov (United States)

    Duris, J.W.; Haack, S.K.; Fogarty, L.R.

    2009-01-01

    The relation of bacterial pathogen occurrence to fecal indicator bacteria (FIB) concentrations used for recreational water quality criteria (RWQC) is poorly understood. This study determined the occurrence of Shiga-toxin producing Escherichia coli (STEC) markers and their relation to FIB concentrations in Michigan and Indiana river water. Using 67 fecal coliform (FC) bacteria cultures from 41 river sites in multiple watersheds, we evaluated the occurrence of five STEC markers: the Escherichia coli (EC) O157 antigen and gene, and the STEC virulence genes eaeA, stx1, and stx2. Simple isolations from selected FC cultures yielded viable EC O157. By both antigen and gene assays, EC O157 was detected in a greater proportion of samples exceeding rather than meeting FC RWQC (P public health decision-making. Copyright ?? 2009 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

  7. Total pancreatectomy for recurrent acute and chronic pancreatitis: a critical review of patient selection criteria

    Science.gov (United States)

    Faghih, Mahya; Gonzalez, Francisco Garcia; Makary, Martin A.; Singh, Vikesh K.

    2018-01-01

    Purpose of review Critical review of the indications for total pancreatectomy and highlight limitations in current diagnostic criteria for chronic pancreatitis. Recent findings The diagnosis of noncalcific chronic pancreatitis remains controversial because of an overreliance on nonspecific imaging and laboratories findings. Endoscopic ultrasound, s-magnetic resonance cholangiopancreatography, and/or endoscopic pancreatic function testing are often used to diagnose noncalcific chronic pancreatitis despite the fact that there is no gold standard for this condition. Abdominal pain is not specific for chronic pancreatitis and is more likely to be encountered in patients with functional gastrointestinal disorders based on the high incidence of these conditions. The duration of pain and opioid analgesic use results in central sensitization that adversely affects pain outcomes after total pancreatectomy. An alcoholic cause is associated with poorer pain outcomes after total pancreatectomy. Summary The lack of a gold standard for noncalcific chronic pancreatitis limits the diagnostic accuracy of imaging and laboratory tests. The pain of chronic pancreatitis is nonspecific and is affected by duration, preoperative opioid use, and cause. These factors will need to be considered in the development of future selection criteria for this morbid surgery. PMID:28700371

  8. KNOWLEDGE ENGINEERING TO AID THE RECRUITMENT PROCESS OF AN INDUSTRY BY IDENTIFYING SUPERIOR SELECTION CRITERIA

    Directory of Open Access Journals (Sweden)

    N. Sivaram

    2011-01-01

    Full Text Available Recruitment of the most appropriate employees and their retention are the immense challenges for the HR department of most of the industries. Every year IT companies recruit fresh graduates through their campus selection programs. Usually industries examine the skills of the candidate by conducting tests, group discussion and number of interviews. This process requires enormous amount of effort and investment. During each phase of the recruitment process, candidates are filtered based on some performance criteria. The problem domain is complex and the aspects of candidates that impact the recruitment process is not explicit. The intelligence of the recruitment process is spread among the domain experts and extracted through knowledge acquisition techniques. This research focuses on investigating the underlying criteria and tries to capitalize on the existing patterns, to minimize the effort made during the recruitment process. The approach here is to provide the insights through in-depth empirical characterization and evaluation of decision trees for the recruitment problem domain. Experiments were conducted with the data collected from an IT industry to support their hiring decisions. Pruned and unpruned trees were constructed using ID3, C4.5 and CART algorithms. It was observed that the performance of the C4.5 algorithm is high. The recruitment process differs for each industry based on the nature of the projects carried out. Experiments were conducted to determine the attributes that best fits the problem domain. Using the constructed decision trees discussions were made with the domain experts to deduce viable decision rules.

  9. Criteria for selecting a CO2/climate change region of study

    International Nuclear Information System (INIS)

    Cushman, R.; Easterling, W.; Rosenberg, N.; Malone, T.; Edmonds, J.; Scott, M.; Stoke, G.

    1989-01-01

    This effort has three near-term goals: (1) to develop robust methods of analysis including the analysis of uncertainty; (2) to develop information systems to support CO 2 /climate change analysis; and (3) to develop channels of communication among researchers and between researchers and parties potentially affected by CO 2 /climate change. Initially, the program will focus on a single region of the United States, employ a historical analog climate, and analyze the interactions of all of the resources resident within that region as they might evolve under current conditions and under evolving CO 2 /climate change over the next 50 years. Five elements of the program will address the issues of: Analysis, Information Systems, Uncertainty, Knowledge Transfer, and Coordination. This paper will give special attention to the analytical framework and in particular to the criteria for selecting a region for study. 19 refs., 2 figs

  10. A Fuzzy Multi-Criteria SWOT Analysis: An Application to Nuclear Power Plant Site Selection

    Directory of Open Access Journals (Sweden)

    Mehmet Ekmekcioglu

    2011-08-01

    Full Text Available SWOT (Strengths, Weaknesses, Opportunities and Threats analysis is a commonly used and an important technique for analyzing internal and external environments in order to provide a systematic approach and support for a decision making. SWOT is criticized mostly for considering only qualitative examination of environmental factors, no priority for various factors and strategies, and no vagueness of the factors under fuzziness. In this paper, fuzzy TOPSIS (Technique for Order Preference by Similarity to Ideal Solution integrated with fuzzy AHP (Analytical Hierarchy Process is used to develop fuzzy multi-criteria SWOT analysis in order to overcome these shortcomings. Nuclear power plant site selection, which is a strategic and important issue for Turkeyrs energy policy making, is considered as an application case study that demonstrated the applicability of the developed fuzzy SWOT model.

  11. Optimal Selection of Clustering Algorithm via Multi-Criteria Decision Analysis (MCDA for Load Profiling Applications

    Directory of Open Access Journals (Sweden)

    Ioannis P. Panapakidis

    2018-02-01

    Full Text Available Due to high implementation rates of smart meter systems, considerable amount of research is placed in machine learning tools for data handling and information retrieval. A key tool in load data processing is clustering. In recent years, a number of researches have proposed different clustering algorithms in the load profiling field. The present paper provides a methodology for addressing the aforementioned problem through Multi-Criteria Decision Analysis (MCDA and namely, using the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS. A comparison of the algorithms is employed. Next, a single test case on the selection of an algorithm is examined. User specific weights are applied and based on these weight values, the optimal algorithm is drawn.

  12. Lyme Neuroborreliosis: Preliminary Results from an Urban Referral Center Employing Strict CDC Criteria for Case Selection

    Directory of Open Access Journals (Sweden)

    David S. Younger

    2010-01-01

    Full Text Available Lyme neuroborreliosis or “neurological Lyme disease” was evidenced in 2 of 23 patients submitted to strict criteria for case selection of the Centers for Disease Control and Prevention employing a two-tier test to detect antibodies to Borrelia burgdorferi at a single institution. One patient had symptomatic polyradiculoneuritis, dysautonomia, and serological evidence of early infection; and another had symptomatic small fiber sensory neuropathy, distal polyneuropathy, dysautonomia, and serological evidence of late infection. In the remaining patients symptoms initially ascribed to Lyme disease were probably unrelated to B. burgdorferi infection. Our findings suggest early susceptibility and protracted involvement of the nervous system most likely due to the immunological effects of B. burgdorferi infection, although the exact mechanisms remain uncertain.

  13. Habitat suitability criteria via parametric distributions: estimation, model selection and uncertainty

    Science.gov (United States)

    Som, Nicholas A.; Goodman, Damon H.; Perry, Russell W.; Hardy, Thomas B.

    2016-01-01

    Previous methods for constructing univariate habitat suitability criteria (HSC) curves have ranged from professional judgement to kernel-smoothed density functions or combinations thereof. We present a new method of generating HSC curves that applies probability density functions as the mathematical representation of the curves. Compared with previous approaches, benefits of our method include (1) estimation of probability density function parameters directly from raw data, (2) quantitative methods for selecting among several candidate probability density functions, and (3) concise methods for expressing estimation uncertainty in the HSC curves. We demonstrate our method with a thorough example using data collected on the depth of water used by juvenile Chinook salmon (Oncorhynchus tschawytscha) in the Klamath River of northern California and southern Oregon. All R code needed to implement our example is provided in the appendix. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

  14. Assessment of somatotype in young voleyball players: Validity as criteria to select young sports talents

    Directory of Open Access Journals (Sweden)

    Moisés de Hoyo Lora

    2008-07-01

    Full Text Available http://dx.doi.org/10.5007/1980-0037.2008v10n3p255 The anthropometric characteristics of athletes can determine their sporting performance. For this reason, we’ve defined the somatotype of young volleyball players in order to be able to control their sports training and to ensure their appropriate athletic development. In the present investigation 154 male and female volleyball players (aged from 12 to 14 years were analyzed. Data were collected according to the ISAK protocol. The results show an endomesomorphic profile for male and female volleyball players agreeing with the predominant profile at these ages. However, after comparing these data with results obtained in other studies, we observed a certain homogeneity in the male somatotype, invalidating the current trend of using this parameter as criteria to select young sports talent. However, somatotype could be a factor to take into account with female athletes, since their profile is much more heterogeneous.

  15. Defining new criteria for selection of cell-based intestinal models using publicly available databases

    Directory of Open Access Journals (Sweden)

    Christensen Jon

    2012-06-01

    Full Text Available Abstract Background The criteria for choosing relevant cell lines among a vast panel of available intestinal-derived lines exhibiting a wide range of functional properties are still ill-defined. The objective of this study was, therefore, to establish objective criteria for choosing relevant cell lines to assess their appropriateness as tumor models as well as for drug absorption studies. Results We made use of publicly available expression signatures and cell based functional assays to delineate differences between various intestinal colon carcinoma cell lines and normal intestinal epithelium. We have compared a panel of intestinal cell lines with patient-derived normal and tumor epithelium and classified them according to traits relating to oncogenic pathway activity, epithelial-mesenchymal transition (EMT and stemness, migratory properties, proliferative activity, transporter expression profiles and chemosensitivity. For example, SW480 represent an EMT-high, migratory phenotype and scored highest in terms of signatures associated to worse overall survival and higher risk of recurrence based on patient derived databases. On the other hand, differentiated HT29 and T84 cells showed gene expression patterns closest to tumor bulk derived cells. Regarding drug absorption, we confirmed that differentiated Caco-2 cells are the model of choice for active uptake studies in the small intestine. Regarding chemosensitivity we were unable to confirm a recently proposed association of chemo-resistance with EMT traits. However, a novel signature was identified through mining of NCI60 GI50 values that allowed to rank the panel of intestinal cell lines according to their drug responsiveness to commonly used chemotherapeutics. Conclusions This study presents a straightforward strategy to exploit publicly available gene expression data to guide the choice of cell-based models. While this approach does not overcome the major limitations of such models

  16. Criteria for selection and application of molecular markers for clinical studies of osteoarthritis.

    Science.gov (United States)

    Otterness, I G; Swindell, A C

    2003-03-01

    To develop criteria for the selection and application of molecular markers for the study of osteoarthritis (OA). Statistical criteria for marker selection for OA are developed. After studying more than 20 different molecular markers for monitoring OA, procedures for choosing markers for clinical studies have been developed. For a particular study, the process starts with the markers showing 'face-validity' for monitoring OA. They are next required to successfully distinguish OA patients from controls. This necessitates definition of the distribution of marker values in OA patients and controls. So far, they have been consistently log-normal. The difference (Delta) in marker values between OA and controls defines the opportunity for marker improvement. The between-visit standard deviation (S) in patients puts limits on the detection of marker changes. The two variables can be combined to estimate the practicality of a marker using a modified power analysis. The number of patients (N*) required to observe a 50% improvement with an alpha level of P=0.05 and with 80% certainty is estimated as 50(S/Delta)(2). N*, S and Delta should be used to characterize and compare markers. Marker efficiency can be refined by regressing on secondary variables, such as age, sex, BMI, severity, etc. Finally, the use of two or more markers may be required to improve marker prediction of clinical outcome. Correlated markers can be used to reinforce conclusions by essentially adding replicative data. Independent, complementary markers can be used to develop associations with clinical parameters, and perhaps diagnose and monitor disease status, activities that so far have not been possible with single markers.

  17. An improved hybrid multi-criteria/multidimensional model for strategic industrial location selection: Casablanca industrial zones as a case study.

    Science.gov (United States)

    Boutkhoum, Omar; Hanine, Mohamed; Agouti, Tarik; Tikniouine, Abdessadek

    2015-01-01

    In this paper, we examine the issue of strategic industrial location selection in uncertain decision making environments for implanting new industrial corporation. In fact, the industrial location issue is typically considered as a crucial factor in business research field which is related to many calculations about natural resources, distributors, suppliers, customers, and most other things. Based on the integration of environmental, economic and social decisive elements of sustainable development, this paper presents a hybrid decision making model combining fuzzy multi-criteria analysis with analytical capabilities that OLAP systems can provide for successful and optimal industrial location selection. The proposed model mainly consists in three stages. In the first stage, a decision-making committee has been established to identify the evaluation criteria impacting the location selection process. In the second stage, we develop fuzzy AHP software based on the extent analysis method to assign the importance weights to the selected criteria, which allows us to model the linguistic vagueness, ambiguity, and incomplete knowledge. In the last stage, OLAP analysis integrated with multi-criteria analysis employs these weighted criteria as inputs to evaluate, rank and select the strategic industrial location for implanting new business corporation in the region of Casablanca, Morocco. Finally, a sensitivity analysis is performed to evaluate the impact of criteria weights and the preferences given by decision makers on the final rankings of strategic industrial locations.

  18. Dual Kidney Transplantation: Evaluation of Recipient Selection Criteria at Niguarda Hospital.

    Science.gov (United States)

    Mariani, A; Ferla, F; De Carlis, R; Rossetti, O; Covucci, E; Tripepi, M; Concone, G; Lauterio, A; Mangoni, I; De Carlis, L

    2016-03-01

    Dual kidney transplantation (DKT) is a largely accepted strategy to enlarge the donor pool. Niguarda Hospital started this program in December 2010, and 38 DKT have been performed. In our series, we included recipients older than those in the other series published in literature. The aim of this study was to know if our recipient selection criteria for DKT are safe. We reviewed our data base of DKT and analyzed recipients' medical history, surgical technique, post-operative complications, graft survival, morbidity, and mortality. We then compared our results with the literature. From December 2010 to April 2015, 38 DKT were performed in Niguarda Hospital. Delayed graft function was present in 21 recipients. Explantation of both kidneys was performed in 1 patient and explantation of 1 kidney in 6 patients. Post-operative complications were present in 8 patients. Five patients returned to hemodialysis after DKT. One recipient died of medical post-operative sepsis. The mean follow-up was 24 months. Graft survival and patient survival were 86.84% and 97.93%, respectively. Compared with the literature, our series had similar mortality and morbidity rates, even if recipients' age was higher than in other series. The strategy of DKT allocation in elderly recipients is safe. Further studies have to be performed to optimized selection of the recipients for DKT not to disadvantage younger patients in the transplant waiting list and to improve the technique of organ evaluation and preservation to refine graft allocation. Copyright © 2016 Elsevier Inc. All rights reserved.

  19. Multi-criteria decision making in the selection of machining parameters for Inconel 718

    International Nuclear Information System (INIS)

    Thirumalai, R.; Senthilkumaar, J. S.

    2013-01-01

    Taguchi's methods and design of experiments are invariably used and adopted as quality improvement techniques in several manufacturing industries as tools for offline quality control. These methods optimize single-response processes. However, Taguchi's method is not appropriate for optimizing a multi-response problem. In other situations, multi-responses need to be optimized simultaneously. This paper presents multi-response optimization techniques. A set of non-dominated solutions are obtained using non-sorted genetic algorithm for multi-objective functions. Multi-criteria decision making (MCDM) is proposed in this work for selecting a single solution from nondominated solutions. This paper addresses a new method of MCDM concept based on technique for order preference by similarity to ideal solution (TOPSIS). TOPSIS determines the shortest distance to the positive-ideal solution and the greatest distance from the negative-ideal solution. This work involves the high-speed machining of Inconel 718 using carbide cutting tool with six objective functions that are considered as attributes against the process variables of cutting speed, feed, and depth of cut. The higher-ranked solution is selected as the best solution for the machining of Inconel 718 in its respective environment.

  20. Multi-criteria decision making in the selection of machining parameters for Inconel 718

    Energy Technology Data Exchange (ETDEWEB)

    Thirumalai, R. [SNS College of Technology, Coimbatore (India); Senthilkumaar, J. S. [Bharathithasan Engineering College, Nattrampalli (India)

    2013-04-15

    Taguchi's methods and design of experiments are invariably used and adopted as quality improvement techniques in several manufacturing industries as tools for offline quality control. These methods optimize single-response processes. However, Taguchi's method is not appropriate for optimizing a multi-response problem. In other situations, multi-responses need to be optimized simultaneously. This paper presents multi-response optimization techniques. A set of non-dominated solutions are obtained using non-sorted genetic algorithm for multi-objective functions. Multi-criteria decision making (MCDM) is proposed in this work for selecting a single solution from nondominated solutions. This paper addresses a new method of MCDM concept based on technique for order preference by similarity to ideal solution (TOPSIS). TOPSIS determines the shortest distance to the positive-ideal solution and the greatest distance from the negative-ideal solution. This work involves the high-speed machining of Inconel 718 using carbide cutting tool with six objective functions that are considered as attributes against the process variables of cutting speed, feed, and depth of cut. The higher-ranked solution is selected as the best solution for the machining of Inconel 718 in its respective environment.

  1. Criteria for the Selection of Tourism Destinations by Students from Different Countries

    Directory of Open Access Journals (Sweden)

    Dębski Maciej

    2017-12-01

    Full Text Available The objective of this paper is to identify selected aspects of the management of information about prospective tourist destinations by young people (students from Canada, Poland, and Trinidad and Tobago. On the basis of a questionnaire study, the ranking of preferences of respondents (i.e., the main criteria of destination choice has been presented. Students were selected as respondents - as a “convenient sample” - in this privately funded study. A variety of aspects related to comfort (and convenience and attractiveness have been identified as most important to the choice of destination. These are also leading motives that may form a platform for advertising campaigns and suggestions for regional development. This examination has been done mainly with the use of analysis of averages, Spearman correlation coefficients, and various approaches to factor analysis. It turns out that despite very different characteristics of respondents from the three countries, both their preferences and motives for promotion of the destination are very similar. Conclusions can be helpful for travel agencies and those responsible for the development of tourism infrastructure, as well as for the organization of further studies on the subject. The combination of various statistical tools used when examining the subject and the finding - that is, the similarity of preferences between travelers - can be regarded as new value when examining the subject.

  2. Multi-Criteria Knapsack Problem for Disease Selection in an Observation Ward

    International Nuclear Information System (INIS)

    Lurkittikul, N; Kittithreerapronchai, O

    2014-01-01

    The aging population and the introduction of Thailand universal healthcare have increased inpatients and outpatients to public hospitals, particularly to a hospital that provides special and comprehensive health services. Many inpatient wards have experienced large influx of inpatients as the hospitals have to admit all patients regardless their conditions. These overcrowding wards cause stress to medical staffs, block access between medical departments, hospital-acquired infections, and ineffective uses of resources. One way to manage such inundated inpatient is to select some patients whose conditions require less clinical attention or whose lengths of stay are predictable and short and, then, place them at an observation ward. This intermediate ward increases turnover of beds and reduces unnecessary paperwork as patients are considered to be outpatients. In this article, we studied inpatient data of a tertiary care hospital in which an observation ward was considered to alleviate the overcrowding problem at Internal Medicine Department. The analysis of data showed that the hospital can balance inpatient flow by managing a group of patients who is admitted because of treatments ordered by its special clinics. Having explored several alternatives, we suggested patient selection criteria and proposed a layout at an observation ward. The hospital should increase medical beds in a new building ward because the current observation ward can handle 27.3% of total short stay patients, while the observation ward is projected to handle 80% of total short stay patients

  3. Multi-criteria approach for selecting the best solid waste management technologies

    International Nuclear Information System (INIS)

    Latifah, A.M.; Hassan Basri; Noor Ezlin Ahmad Basri

    2010-01-01

    The growth in urbanization and industrial activities has caused solid waste management problems. As a solution the integrated approach has been chosen to manage the solid waste. Developing and implementing integrated solid waste management involve combined technologies and alternatives which are suitable with local laws condition. This research showed that Analytical Hierarchy Process (AHP) has the potential as a decision making tool that can be used in selecting process of solid waste management technology. Three levels hierarchy was developed with the goal at the top level, followed by criteria and alternatives. By using this technique, the priority of each considered technology will be determined where technology with the highest priority is more suitable to be developed. Sensitivity analysis was carried out to test the sensitivity of final decision towards inconsistency of judgement. Application of AHP to determine priority in selecting solid waste management technology was explained in this research based on a case study in the Port Dickson Municipal Council. Analysis of result showed that the combination of recycling technology and composting are suitable to be applied in the Port Dickson district. (author)

  4. Multi-Criteria Knapsack Problem for Disease Selection in an Observation Ward

    Science.gov (United States)

    Lurkittikul, N.; Kittithreerapronchai, O.

    2014-06-01

    The aging population and the introduction of Thailand universal healthcare have increased inpatients and outpatients to public hospitals, particularly to a hospital that provides special and comprehensive health services. Many inpatient wards have experienced large influx of inpatients as the hospitals have to admit all patients regardless their conditions. These overcrowding wards cause stress to medical staffs, block access between medical departments, hospital-acquired infections, and ineffective uses of resources. One way to manage such inundated inpatient is to select some patients whose conditions require less clinical attention or whose lengths of stay are predictable and short and, then, place them at an observation ward. This intermediate ward increases turnover of beds and reduces unnecessary paperwork as patients are considered to be outpatients. In this article, we studied inpatient data of a tertiary care hospital in which an observation ward was considered to alleviate the overcrowding problem at Internal Medicine Department. The analysis of data showed that the hospital can balance inpatient flow by managing a group of patients who is admitted because of treatments ordered by its special clinics. Having explored several alternatives, we suggested patient selection criteria and proposed a layout at an observation ward. The hospital should increase medical beds in a new building ward because the current observation ward can handle 27.3% of total short stay patients, while the observation ward is projected to handle 80% of total short stay patients.

  5. Design Criteria, Operating Conditions, and Nickel-Iron Hydroxide Catalyst Materials for Selective Seawater Electrolysis.

    Science.gov (United States)

    Dionigi, Fabio; Reier, Tobias; Pawolek, Zarina; Gliech, Manuel; Strasser, Peter

    2016-05-10

    Seawater is an abundant water resource on our planet and its direct electrolysis has the advantage that it would not compete with activities demanding fresh water. Oxygen selectivity is challenging when performing seawater electrolysis owing to competing chloride oxidation reactions. In this work we propose a design criterion based on thermodynamic and kinetic considerations that identifies alkaline conditions as preferable to obtain high selectivity for the oxygen evolution reaction. The criterion states that catalysts sustaining the desired operating current with an overpotential seawater-mimicking electrolyte. The catalyst was synthesized by a solvothermal method and the activity, surface redox chemistry, and stability were tested electrochemically in alkaline and near-neutral conditions (borate buffer at pH 9.2) and under both fresh seawater conditions. The Tafel slope at low current densities is not influenced by pH or presence of chloride. On the other hand, the addition of chloride ions has an influence in the temporal evolution of the nickel reduction peak and on both the activity and stability at high current densities at pH 9.2. Faradaic efficiency close to 100 % under the operating conditions predicted by our design criteria was proven using in situ electrochemical mass spectrometry. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. The Criteria of Love: Trait Desirability of Filipino Youth on Mate Selection

    Directory of Open Access Journals (Sweden)

    Racidon P. Bernarte

    2016-08-01

    Full Text Available In choosing a life partner, making a ‘good match’ is what everyone hopes for. Usually we have the habit of thinking on how many potential mates are sitting around? And with that, how many would you be attracted and attached to, and how many person you’d probably never date? To find out the relevance of the claim, this quantitative study was designed to know the desirable traits being considered by the Filipino youth in selecting their potential mate, and how male and female differ in their preferences. A total of 400 Filipino university students with the age of 15 to 23 years old participated in the study through self-administered survey. General findings revealed that over the 6 trait dimensions: Physical Traits; Social Traits; Personality Traits; Skills; Achievements; and Spiritual Traits—male and female have significant difference in their trait preference in choosing their mate. Though there are traits that fall under the same degree of importance, women still have higher preference in mate selection criteria as compared to men in all traits. Overall, the trait preferences of the respondents were critically influenced by their sex. Nevertheless, this study clearly suggests the similarity that men and women put importance to traits which can help them develop and maintain an intimate and strong interpersonal relationship with their mate.

  7. Disappointing performance of literature-derived selective screening criteria for asymptomatic Chlamydia trachomatis infection in an inner-city population

    NARCIS (Netherlands)

    van Valkengoed, I G; Boeke, A J; Morré, S A; van den Brule, A J; Meijer, C J; Devillé, W; Bouter, L M

    2000-01-01

    BACKGROUND: In an inner-city population with a low prevalence of Chlamydia trachomatis infection, selective screening may be indicated to increase the efficiency of screening. GOAL: To evaluate the performance of sets of selective screening criteria for asymptomatic Chlamydia trachomatis infection

  8. Study-design selection criteria in systematic reviews of effectiveness of health systems interventions and reforms: A meta-review.

    Science.gov (United States)

    Rockers, Peter C; Feigl, Andrea B; Røttingen, John-Arne; Fretheim, Atle; de Ferranti, David; Lavis, John N; Melberg, Hans Olav; Bärnighausen, Till

    2012-03-01

    At present, there exists no widely agreed upon set of study-design selection criteria for systematic reviews of health systems research, except for those proposed by the Cochrane Collaboration's Effective Practice and Organisation of Care (EPOC) review group (which comprises randomized controlled trials, controlled clinical trials, controlled before-after studies, and interrupted time series). We conducted a meta-review of the study-design selection criteria used in systematic reviews available in the McMaster University's Health Systems Evidence or the EPOC database. Of 414 systematic reviews, 13% did not indicate any study-design selection criteria. Of the 359 studies that described such criteria, 50% limited their synthesis to controlled trials and 68% to some or all of the designs defined by the EPOC criteria. Seven out of eight reviews identified at least one controlled trial that was relevant for the review topic. Seven percent of the reviews included either no or only one relevant primary study. Our meta-review reveals reviewers' preferences for restricting synthesis to controlled experiments or study designs that comply with the EPOC criteria. We discuss the advantages and disadvantages of the current practices regarding study-design selection in systematic reviews of health systems research as well as alternative approaches. Copyright © 2012. Published by Elsevier Ireland Ltd.

  9. Early Site Permit Demonstration Program: Siting Guide, Site selection and evaluation criteria for an early site permit application

    International Nuclear Information System (INIS)

    1993-01-01

    In August 1991, the Joint Contractors came to agreement with Sandia National Laboratories (SNL) and the Department of Energy (DOE) on a workscope for the cost-shared Early Site Permit Demonstration Program. One task within the scope was the development of a guide for site selection criteria and procedures. A generic Siting Guide his been prepared that is a roadmap and tool for applicants to use developing detailed siting plans for their specific region of the country. The guide presents three fundamental principles that, if used, ensure a high degree of success for an ESP applicant. First, the site selection process should take into consideration environmentally diverse site locations within a given region of interest. Second, the process should contain appropriate opportunities for input from the public. Third, the process should be applied so that it is clearly reasonable to an impartial observer, based on appropriately selected criteria, including criteria which demonstrate that the site can host an advanced light water reactor (ALWR). The Siting Guide provides for a systematic, comprehensive site selection process in which three basic types of criteria (exclusionary, avoidance, and suitability) are presented via a four-step procedure. It provides a check list of the criteria for each one of these steps. Criteria are applied qualitatively, as well as presented numerically, within the guide. The applicant should use the generic guide as an exhaustive checklist, customizing the guide to his individual situation

  10. Early Site Permit Demonstration Program: Siting Guide, Site selection and evaluation criteria for an early site permit application. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-24

    In August 1991, the Joint Contractors came to agreement with Sandia National Laboratories (SNL) and the Department of Energy (DOE) on a workscope for the cost-shared Early Site Permit Demonstration Program. One task within the scope was the development of a guide for site selection criteria and procedures. A generic Siting Guide his been prepared that is a roadmap and tool for applicants to use developing detailed siting plans for their specific region of the country. The guide presents three fundamental principles that, if used, ensure a high degree of success for an ESP applicant. First, the site selection process should take into consideration environmentally diverse site locations within a given region of interest. Second, the process should contain appropriate opportunities for input from the public. Third, the process should be applied so that it is clearly reasonable to an impartial observer, based on appropriately selected criteria, including criteria which demonstrate that the site can host an advanced light water reactor (ALWR). The Siting Guide provides for a systematic, comprehensive site selection process in which three basic types of criteria (exclusionary, avoidance, and suitability) are presented via a four-step procedure. It provides a check list of the criteria for each one of these steps. Criteria are applied qualitatively, as well as presented numerically, within the guide. The applicant should use the generic guide as an exhaustive checklist, customizing the guide to his individual situation.

  11. A fuzzy multi-criteria decision model for integrated suppliers selection and optimal order allocation in the green supply chain

    Directory of Open Access Journals (Sweden)

    Hamzeh Amin-Tahmasbi

    2018-09-01

    Full Text Available Today, with the advancement of technology in the production process of various products, the achievement of sustainable production and development has become one of the main concerns of factories and manufacturing organizations. In the same vein, many manufacturers try to select suppliers in their upstream supply chains that have the best performance in terms of sustainable development criteria. In this research, a new multi-criteria decision-making model for selecting suppliers and assigning orders in the green supply chain is presented with a fuzzy optimization approach. Due to uncertainty in supplier capacity as well as customer demand, the problem is formulated as a fuzzy multi-objective linear programming (FMOLP. The proposed model for the selection of suppliers of SAPCO Corporation is evaluated. Firstly, in order to select and rank suppliers in a green supply chain, a network structure of criteria has defined with five main criteria of cost, quality, delivery, technology and environmental benefits. Subsequently, using incomplete fuzzy linguistic relationships, pair-wise comparisons between the criteria and sub-criteria as well as the operation of the options will be assessed. The results of these comparisons rank the existing suppliers in terms of performance and determine the utility of them. The output of these calculations (utility index is used in the optimization model. Subsequently, in the order allocation process, the two functions of the target cost of purchase and purchase value are optimized simultaneously. Finally, the order quantity is determined for each supplier in each period.

  12. Medical student selection criteria as predictors of intended rural practice following graduation.

    Science.gov (United States)

    Puddey, Ian B; Mercer, Annette; Playford, Denese E; Pougnault, Sue; Riley, Geoffrey J

    2014-10-14

    Recruiting medical students from a rural background, together with offering them opportunities for prolonged immersion in rural clinical training environments, both lead to increased participation in the rural workforce after graduation. We have now assessed the extent to which medical students' intentions to practice rurally may also be predicted by either medical school selection criteria and/or student socio-demographic profiles. The study cohort included 538 secondary school-leaver entrants to The University of Western Australia Medical School from 2006 to 2011. On entry they completed a questionnaire indicating intention for either urban or rural practice following graduation. Selection factors (standardised interview score, percentile score from the Undergraduate Medicine and Health Sciences Admission Test (UMAT) and prior academic performance (Australian Tertiary Admissions Rank), together with socio-demographic factors (age, gender, decile for the Index of Relative Socioeconomic Advantage and Disadvantage (IRSAD) and an index of rurality) were examined in relation to intended rural or urban destination of practice. In multivariate logistic regression, students from a rural background had a nearly 8-fold increase in the odds of intention to practice rurally after graduation compared to those from urban backgrounds (OR 7.84, 95% CI 4.10, 14.99, P practice rurally (OR 4.36, 95% CI 1.69, 11.22, P medical school entry may have the unintended consequence of selecting fewer graduates interested in a rural practice destination. Increased efforts to recruit students from lower socioeconomic backgrounds may be beneficial in terms of an ultimate intended rural practice destination.

  13. Multi-criteria decision making support tool for freight integrators: selecting the most sustainable alternative

    Directory of Open Access Journals (Sweden)

    G. Simongáti

    2010-03-01

    Full Text Available Sustainable development has turned into a daily concept by now. Similarly, sustainable transport also appears increasingly often, primarily in transport policy and strategic plans. However, it would be equally important if we could apply this aspect for certain activities such as haulage and forwarding that are a part of transport. Today, forwarders select an optimal alternative concerning only the criteria related to the economic effectiveness of the transport task. In many cases, shippers are not aware neither of the concept of sustainable transport nor of harmful effects they generate. Hence, although there is a concept of ‘freight integrator’, only very few are able to meet the requirements laid down for it. No widespread method has been developed yet to compare transportation options. A similar situation can be faced discussing a traditional, purely economic approach and a theoretical modern aspect that would be in accordance with the principles of sustainable transport. The model that was developed at the Department of Aircraft and Ships of Budapest University of Technology and Economics was designed specifically to compare various options in terms of sustainability. The indicators as the elements of decision-making criteria applied in the model were derived from the indicators used for assessing the transport sector but modified according to the requirements of the decision-making task for a freight integrator. Finally, such sustainable performance index of certain alternatives is determined by two fundamentally different aggregation methods as ‘fineness index’. This article presents the model structure and application using a concrete example.

  14. A review of odour impact criteria in selected countries around the world.

    Science.gov (United States)

    Brancher, Marlon; Griffiths, K David; Franco, Davide; de Melo Lisboa, Henrique

    2017-02-01

    Exposure to environmental odour can result in annoyance, health effects and depreciation of property values. Therefore, many jurisdictions classify odour as an atmospheric pollutant and regulate emissions and/or impacts from odour generating activities at a national, state or municipal level. In this work, a critical review of odour regulations in selected jurisdictions of 28 countries is presented. Individual approaches were identified as: comparing ambient air odour concentration and individual chemicals statistics against impact criteria (maximum impact standard); using fixed and variable separation distances (separation distance standard); maximum emission rate for mixtures of odorants and individual chemical species (maximum emission standard); number of complaints received or annoyance level determined via community surveys (maximum annoyance standard); and requiring use of best available technologies (BAT) to minimize odour emissions (technology standard). The comparison of model-predicted odour concentration statistics against odour impact criteria (OIC) is identified as one of the most common tools used by regulators to evaluate the risk of odour impacts in planning stage assessments and is also used to inform assessment of odour impacts of existing facilities. Special emphasis is given to summarizing OIC (concentration percentile and threshold) and the manner in which they are applied. The way short term odour peak to model time-step mean (peak-to-mean) effects is also captured. Furthermore, the fundamentals of odorant properties, dimensions of nuisance odour, odour sampling and analysis methods and dispersion modelling guidance are provided. Common elements of mature and effective odour regulation frameworks are identified and an integrated multi-tool strategy is recommended. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Fuzzy Logic Based Multi-Criteria Wind Turbine Selection Strategy—A Case Study of Qassim, Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Shafiqur Rehman

    2016-10-01

    Full Text Available The emergence of wind energy as a potential alternative to traditional sources of fuel has prompted notable research in recent years. One primary factor contributing to efficient utilization of wind energy from a wind farm is the type of turbines used. However, selection of a specific wind turbine type is a difficult task due to several criteria involved in the selection process. Important criteria include turbine’s power rating, height of tower, energy output, rotor diameter, cut-in wind speed, and rated wind speed. The complexity of this selection process is further amplified by the presence of conflicts between the decision criteria. Therefore, a decision is desired that provides the best balance between all selection criteria. Considering the complexities involved in the decision-making process, this paper proposes a two-level decision turbine selection strategy based on fuzzy logic and multi-criteria decision-making (MCDM approach. More specifically, the fuzzy arithmetic mean operator is used in the decision process. The proposed approach is applied to wind data collected from the site of Qassim, Saudi Arabia. Results indicate that the proposed approach was effective in finding the optimal turbine from a set of 20 turbines of various capacities.

  16. A Review of Criteria for Outdoor Classroom in Selected Tertiary Educational Institutions in Kuala Lumpur

    Science.gov (United States)

    Maheran, Y.; Fadzidah, A.; Nur Fadhilah, R.; Farha, S.

    2017-12-01

    A proper design outdoor environment in higher institutions contributes to the students’ learning performances and produce better learning outcomes. Campus surrounding has the potential to provide an informal outdoor learning environment, especially when it has the existing physical element, like open spaces and natural features, that may support the learning process. However, scholarly discourses on environmental aspects in tertiary education have minimal environmental inputs to fulfill students’ needs for outdoor exposure. Universities have always emphasized on traditional instructional methods in classroom settings, without concerning the importance of outdoor classroom towards students’ learning needs. Moreover, the inconvenience and discomfort outdoor surrounding in campus environment offers a minimal opportunity for students to study outside the classroom, and students eventually do not favor to utilize the spaces because no learning facility is provided. Hence, the objective of this study is to identify the appropriate criteria of outdoor areas that could be converted to be outdoor classrooms in tertiary institutions. This paper presents a review of scholars’ work in regards to the characteristics of the outdoor classrooms that could be designed as part of contemporary effective learning space, for the development of students’ learning performances. The information gathered from this study will become useful knowledge in promoting effective outdoor classroom and create successful outdoor learning space in landscape campus design. It I hoped that the finding of this study could provide guidelines on how outdoor classrooms should be designed to improve students’ academic achievement.

  17. Congruence analysis of geodetic networks - hypothesis tests versus model selection by information criteria

    Science.gov (United States)

    Lehmann, Rüdiger; Lösler, Michael

    2017-12-01

    Geodetic deformation analysis can be interpreted as a model selection problem. The null model indicates that no deformation has occurred. It is opposed to a number of alternative models, which stipulate different deformation patterns. A common way to select the right model is the usage of a statistical hypothesis test. However, since we have to test a series of deformation patterns, this must be a multiple test. As an alternative solution for the test problem, we propose the p-value approach. Another approach arises from information theory. Here, the Akaike information criterion (AIC) or some alternative is used to select an appropriate model for a given set of observations. Both approaches are discussed and applied to two test scenarios: A synthetic levelling network and the Delft test data set. It is demonstrated that they work but behave differently, sometimes even producing different results. Hypothesis tests are well-established in geodesy, but may suffer from an unfavourable choice of the decision error rates. The multiple test also suffers from statistical dependencies between the test statistics, which are neglected. Both problems are overcome by applying information criterions like AIC.

  18. Multi-criteria selection of UPPT subsystems by a social community: The 'Beovoz' case study

    Directory of Open Access Journals (Sweden)

    Vuković Dubravka R.

    2014-01-01

    Full Text Available This research paper considers the issue of multi-criteria selection of urban public passenger transport (UPPT subsystems by a social community, where possible solutions are as follows: (1 implementation of a new one, (2 replacement of the existing with a new one, (3 keeping the existing UPPT subsystem. In order to reach the specific solution for this issue, a new algorithm is proposed, which is heuristic, three phased and relatively simple. The aim of the algorithm is to choose the UPPT subsystem between possible options in the specific traffic corridor. To test the algorithm, the 'Beovoz' case study was made, which includes the analysis of six options of the UPPT subsystem (four of which with railway technology, from which stood out the following alternatives2: bus and railway. The conclusion is that the railway can be used in a modern city, however only for high-volume traffic corridors. The bus subsystem can be used in corridors with lower volume and those that supplement the railway.

  19. A Study on the Basic Criteria for Selecting Heterogeneity Parameters of F18-FDG PET Images

    Science.gov (United States)

    Forgacs, Attila; Pall Jonsson, Hermann; Dahlbom, Magnus; Daver, Freddie; D. DiFranco, Matthew; Opposits, Gabor; K. Krizsan, Aron; Garai, Ildiko; Czernin, Johannes; Varga, Jozsef; Tron, Lajos; Balkay, Laszlo

    2016-01-01

    Textural analysis might give new insights into the quantitative characterization of metabolically active tumors. More than thirty textural parameters have been investigated in former F18-FDG studies already. The purpose of the paper is to declare basic requirements as a selection strategy to identify the most appropriate heterogeneity parameters to measure textural features. Our predefined requirements were: a reliable heterogeneity parameter has to be volume independent, reproducible, and suitable for expressing quantitatively the degree of heterogeneity. Based on this criteria, we compared various suggested measures of homogeneity. A homogeneous cylindrical phantom was measured on three different PET/CT scanners using the commonly used protocol. In addition, a custom-made inhomogeneous tumor insert placed into the NEMA image quality phantom was imaged with a set of acquisition times and several different reconstruction protocols. PET data of 65 patients with proven lung lesions were retrospectively analyzed as well. Four heterogeneity parameters out of 27 were found as the most attractive ones to characterize the textural properties of metabolically active tumors in FDG PET images. These four parameters included Entropy, Contrast, Correlation, and Coefficient of Variation. These parameters were independent of delineated tumor volume (bigger than 25–30 ml), provided reproducible values (relative standard deviation< 10%), and showed high sensitivity to changes in heterogeneity. Phantom measurements are a viable way to test the reliability of heterogeneity parameters that would be of interest to nuclear imaging clinicians. PMID:27736888

  20. A heuristic approach using multiple criteria for environmentally benign 3PLs selection

    Science.gov (United States)

    Kongar, Elif

    2005-11-01

    Maintaining competitiveness in an environment where price and quality differences between competing products are disappearing depends on the company's ability to reduce costs and supply time. Timely responses to rapidly changing market conditions require an efficient Supply Chain Management (SCM). Outsourcing logistics to third-party logistics service providers (3PLs) is one commonly used way of increasing the efficiency of logistics operations, while creating a more "core competency focused" business environment. However, this alone may not be sufficient. Due to recent environmental regulations and growing public awareness regarding environmental issues, 3PLs need to be not only efficient but also environmentally benign to maintain companies' competitiveness. Even though an efficient and environmentally benign combination of 3PLs can theoretically be obtained using exhaustive search algorithms, heuristics approaches to the selection process may be superior in terms of the computational complexity. In this paper, a hybrid approach that combines a multiple criteria Genetic Algorithm (GA) with Linear Physical Weighting Algorithm (LPPW) to be used in efficient and environmentally benign 3PLs is proposed. A numerical example is also provided to illustrate the method and the analyses.

  1. Booster Main Engine Selection Criteria for the Liquid Fly-Back Booster

    Science.gov (United States)

    Ryan, Richard M.; Rothschild, William J.; Christensen, David L.

    1998-01-01

    The Liquid Fly-Back Booster (LFBB) Program seeks to enhance the Space Shuttle system safety performance and economy of operations through the use of an advanced, liquid propellant Booster Main Engine (BME). There are several viable BME candidates that could be suitable for this application. The objective of this study was to identify the key criteria to be applied in selecting among these BME candidates. This study involved an assessment of influences on the overall LFBB utility due to variations in the candidate rocket engines' characteristics. This includes BME impacts on vehicle system weight, perfortnance,design approaches, abort modes, margins of safety, engine-out operations, and maintenance and support concepts. Systems engineering analyses and trade studies were performed to identify the LFBB system level sensitivities to a wide variety of BME related parameters. This presentation summarizes these trade studies and the resulting findings of the LFBB design teams regarding the BME characteristics that most significantly affect the LFBB system. The resulting BME choice should offer the best combination of reliability, performance, reusability, robustness, cost, and risk for the LFBB program.

  2. A Study on the Basic Criteria for Selecting Heterogeneity Parameters of F18-FDG PET Images.

    Directory of Open Access Journals (Sweden)

    Attila Forgacs

    Full Text Available Textural analysis might give new insights into the quantitative characterization of metabolically active tumors. More than thirty textural parameters have been investigated in former F18-FDG studies already. The purpose of the paper is to declare basic requirements as a selection strategy to identify the most appropriate heterogeneity parameters to measure textural features. Our predefined requirements were: a reliable heterogeneity parameter has to be volume independent, reproducible, and suitable for expressing quantitatively the degree of heterogeneity. Based on this criteria, we compared various suggested measures of homogeneity. A homogeneous cylindrical phantom was measured on three different PET/CT scanners using the commonly used protocol. In addition, a custom-made inhomogeneous tumor insert placed into the NEMA image quality phantom was imaged with a set of acquisition times and several different reconstruction protocols. PET data of 65 patients with proven lung lesions were retrospectively analyzed as well. Four heterogeneity parameters out of 27 were found as the most attractive ones to characterize the textural properties of metabolically active tumors in FDG PET images. These four parameters included Entropy, Contrast, Correlation, and Coefficient of Variation. These parameters were independent of delineated tumor volume (bigger than 25-30 ml, provided reproducible values (relative standard deviation< 10%, and showed high sensitivity to changes in heterogeneity. Phantom measurements are a viable way to test the reliability of heterogeneity parameters that would be of interest to nuclear imaging clinicians.

  3. Clinical impact of strict criteria for selectivity and lateralization in adrenal vein sampling.

    Science.gov (United States)

    Gasparetto, Alessandro; Angle, John F; Darvishi, Pasha; Freeman, Colbey W; Norby, Ray G; Carey, Robert M

    2015-04-01

    Selectivity index (SI) and lateralization index (LI) thresholds determine the adequacy of adrenal vein sampling (AVS) and the degree of lateralization. The purpose of this study was investigate the clinical outcome of patients whose adrenal vein sampling was interpreted using "strict criteria" (SC) (SIpre-stimuli≥3, SIpost-stimuli≥5 and LIpre-stimuli≥4, LIpost-stimuli≥4). A retrospective review of 73 consecutive AVS procedures was performed and 67 were technically successful. Forty-three patients showed lateralization and underwent surgery, while 24 did not lateralize and were managed conservatively. Systolic blood pressure (SBP), diastolic blood pressure (DBP), kalemia (K(+)), and the change in number of blood pressure (BP) medications were recorded for each patient before and after AVS and potential surgery were performed. In the surgery group, BP and K(+) changed respectively from 160±5.3/100±2.0 mmHg to 127±3.3/80±1.9 (p blood pressure medications were six (14.0%) in the lateralized group and 22 (91.7%) in the non-lateralized group (p <0.001). AVS interpretation with SC leads to significant clinical improvement in both patients who underwent surgery and those managed conservatively.

  4. Improving selection of markers in nutrition research: evaluation of the criteria proposed by the ILSI Europe Marker Validation Initiative.

    Science.gov (United States)

    Calder, Philip C; Boobis, Alan; Braun, Deborah; Champ, Claire L; Dye, Louise; Einöther, Suzanne; Greyling, Arno; Matthys, Christophe; Putz, Peter; Wopereis, Suzan; Woodside, Jayne V; Antoine, Jean-Michel

    2017-06-01

    The conduct of high-quality nutrition research requires the selection of appropriate markers as outcomes, for example as indicators of food or nutrient intake, nutritional status, health status or disease risk. Such selection requires detailed knowledge of the markers, and consideration of the factors that may influence their measurement, other than the effects of nutritional change. A framework to guide selection of markers within nutrition research studies would be a valuable tool for researchers. A multidisciplinary Expert Group set out to test criteria designed to aid the evaluation of candidate markers for their usefulness in nutrition research and subsequently to develop a scoring system for markers. The proposed criteria were tested using thirteen markers selected from a broad range of nutrition research fields. The result of this testing was a modified list of criteria and a template for evaluating a potential marker against the criteria. Subsequently, a semi-quantitative system for scoring a marker and an associated template were developed. This system will enable the evaluation and comparison of different candidate markers within the same field of nutrition research in order to identify their relative usefulness. The ranking criteria of proven, strong, medium or low are likely to vary according to research setting, research field and the type of tool used to assess the marker and therefore the considerations for scoring need to be determined in a setting-, field- and tool-specific manner. A database of such markers, their interpretation and range of possible values would be valuable to nutrition researchers.

  5. Study on analysing the criteria's for selection of shipping carriers in Chinese shipping market using analytical hierarchy process

    DEFF Research Database (Denmark)

    Shen, Lixin; Mathiyazhagan, K.; Kannan, Devika

    2015-01-01

    Globalisation has led to the increased export and import of goods worldwide. Due to this, the selection of the right mode of transportation for heavy (huge) goods items is a challenging task for industries. In this regard, maritime transport is the best way to send huge goods compared to other...... are cargoes' damage degree when they are received (R2). It is acting as an important criteria and reliability for on-time delivery (R1) and the carrier's ability of multimodal transportation (C1) are the next priority criteria's for the selection of shipping carrier....

  6. American College of Rheumatology provisional criteria for defining clinical inactive disease in select categories of juvenile idiopathic arthritis.

    Science.gov (United States)

    Wallace, Carol A; Giannini, Edward H; Huang, Bin; Itert, Lukasz; Ruperto, Nicolino

    2011-07-01

    To prospectively validate the preliminary criteria for clinical inactive disease (CID) in patients with select categories of juvenile idiopathic arthritis (JIA). We used the process for development of classification and response criteria recommended by the American College of Rheumatology Quality of Care Committee. Patient-visit profiles were extracted from the phase III randomized controlled trial of infliximab in polyarticular-course JIA (i.e., patients considered to resemble those with select categories of JIA) and sent to an international group of expert physician raters. Using the physician ratings as the gold standard, the sensitivity and specificity were calculated using the preliminary criteria. Modifications to the criteria were made, and these were sent to a larger group of pediatric rheumatologists to determine quantitative, face, and content validity. Variables weighted heaviest by physicians when making their judgment were the number of joints with active arthritis, erythrocyte sedimentation rate (ESR), physician's global assessment, and duration of morning stiffness. Three modifications were made: the definition of uveitis, the definition of abnormal ESR, and the addition of morning stiffness. These changes did not alter the accuracy of the preliminary set. The modified criteria, termed the "criteria for CID in select categories of JIA," have excellent feasibility and face, content, criterion, and discriminant validity to detect CID in select categories of JIA. The small changes made to the preliminary criteria set did not alter the area under the receiver operating characteristic curve (0.954) or accuracy (91%), but have increased face and content validity. Copyright © 2011 by the American College of Rheumatology.

  7. Tinjauan Konseptual: Criteria Suplier-Selection, Integrasi Internal dan Eksternal Supply Chain terhadap Kinerja Perusahaan

    Directory of Open Access Journals (Sweden)

    Endar Pituringsih

    2010-08-01

    Full Text Available Performance measurement reflects the company capability to prepare for the customer desired standard while it considers lower production and maintenance costs, higher product quality, reduced stock in process, deprived material processing cost, and shorter delivery deadline. Meanwhile, Supply Chain Management (SCM has important meaning to empower consumer in maximizing customer value. Supply Chain Management (SCM requires: internal integration (intra-organization and external integration (inter-organization. Primary key of Supply Chain Management (SCM will be having supplier as partner in the company strategy and satisfying the always changing market demand. Therefore, a selection among company strategy options in the global competition really produces a model of dominant integration, coordination, and cooperation in controlling global market, precisely through supply chain as important element to contribute to company performance improvement.

  8. Reasons for U.S. Producer Selection of a Goat Enterprise

    OpenAIRE

    Dunn, Brittany; Nyaupane, Narayan; Gillispie, Jeffrey; McMillan, Kenneth

    2014-01-01

    This paper addresses 14 possible reasons why meat goat producers selected to engage in meat goat production, with results having implications for research, extension, and teaching efforts. A survey of meat goat producers was conducted. Reasons for entering meat goat production were assessed and analyzed using ordered probit models.

  9. Selection criteria limit generalizability of smoking pharmacotherapy studies differentially across clinical trials and laboratory studies: A systematic review on varenicline.

    Science.gov (United States)

    Motschman, Courtney A; Gass, Julie C; Wray, Jennifer M; Germeroth, Lisa J; Schlienz, Nicolas J; Munoz, Diana A; Moore, Faith E; Rhodes, Jessica D; Hawk, Larry W; Tiffany, Stephen T

    2016-12-01

    The selection criteria used in clinical trials for smoking cessation and in laboratory studies that seek to understand mechanisms responsible for treatment outcomes may limit their generalizability to one another and to the general population. We reviewed studies on varenicline versus placebo and compared eligibility criteria and participant characteristics of clinical trials (N=23) and laboratory studies (N=22) across study type and to nationally representative survey data on adult, daily USA smokers (2014 National Health Interview Survey; 2014 National Survey on Drug Use and Health). Relative to laboratory studies, clinical trials more commonly reported excluding smokers who were unmotivated to quit and for specific medical conditions (e.g., cardiovascular disease, COPD), although both study types frequently reported excluding for general medical or psychiatric reasons. Laboratory versus clinical samples smoked less, had lower nicotine dependence, were younger, and more homogeneous with respect to smoking level and nicotine dependence. Application of common eligibility criteria to national survey data resulted in considerable elimination of the daily-smoking population for both clinical trials (≥47%) and laboratory studies (≥39%). Relative to the target population, studies in this review recruited participants who smoked considerably more and had a later smoking onset age, and were under-representative of Caucasians. Results suggest that selection criteria of varenicline studies limit generalizability in meaningful ways, and differences in criteria across study type may undermine efforts at translational research. Recommendations for improvements in participant selection and reporting standards are discussed. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  10. TOPSIS Multi-Criteria Decision Modeling Approach for Biolubricant Selection for Two-Stroke Petrol Engines

    Directory of Open Access Journals (Sweden)

    Masoud Dehghani Soufi

    2015-12-01

    Full Text Available Exhaust pollutants from two-stroke petrol engines are a problem for the environment. Biolubricants are a new generation of renewable and eco-friendly vegetable-based lubricants, which have attracted a lot of attention in recent years. In this paper, the applicability of the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS method to support the process of building the scoring system for selecting an appropriate two-stroke lubricant has been analyzed. For this purpose, biolubricants (TMP-triesters based on castor oil, palm oil, and waste cooking oil were produced and then utilized in a 200 cc two-stroke gasoline engine to investigate their effects on its performance and exhaust emissions. The results obtained from the use of the entropy technique in the TOPSIS algorithm showed that palm oil-based lubricant took up the greatest distance from the Negative Ideal Solution (NIS and was selected as the most optimal lubricant for these types of engines.

  11. A COPRAS-F base multi-criteria group decision making approach for site selection of wind farm

    OpenAIRE

    Nikhil Chandra Chatterjee; Goutam Kumar Bose

    2013-01-01

    Today global warming is on the rise and the natural resources are getting consumed at a faster rate. Power consumption has increased many folds to cater the human need. Thus renewable energy resources are the only option available at this juncture. Wind energy is one of the renewable energy. Location selection for wind farm takes an important role on power generation. However, the location selection is a complex multicriteria problem due to the criteria factors which are conflicting in nature...

  12. A hybrid method for information technology selection combining multi-criteria decision making (MCDM) with technology roadmapping

    OpenAIRE

    García Mejía, Jaime Andrés

    2013-01-01

    Abstract: Strategic information technology (IT) management has been recognized as vital for achieving competitive advantage. IT selection, the process of choosing the best technology alternative from a number of available options, is an important part of IT management. The IT selection is a multi-criteria decision making process, where relative importance of each criterion is determined and the degree of satisfaction of every criterion from each alternative is evaluated. Decision makers (DMs)...

  13. Significance of supplier selection criteria evolvment in IT outsourcing to emerging economies: lessons from a global IT outsourcing project

    OpenAIRE

    Hyvonen, H.; Helminen, M.; Watanabe, C.

    2015-01-01

    In line with the increasing significance of the acceleration of information technology (IT) advancement and also of harnessing the vigor of emerging economies, IT outsourcing to emerging economies has become global concerns. This enables global companies to enjoy a critical competitive edge by choosing the best option in outsourcing strategy and supplier selection. Consequently, supplier selection criteria have become critical issues for both suppliers and customers. This paper a...

  14. Selection criteria for patients with chronic ankle instability in controlled research: a position statement of the International Ankle Consortium

    NARCIS (Netherlands)

    Gribble, P.A.; Delahunt, E.; Bleakley, C.M.; Caulfield, B.; Docherty, C.L.; Fong, D.T.; Fourchet, F.; Hertel, J.; Hiller, C.E.; Kaminski, T.W.; McKeon, P.O.; Refshauge, K.M.; Wees, P.J. van der; Vicenzino, W.; Wikstrom, E.A.

    2014-01-01

    While research on chronic ankle instability (CAI) and awareness of its impact on society and health care systems has grown substantially in the last 2 decades, the inconsistency in participant or patient selection criteria across studies presents a potential obstacle to addressing the problem

  15. Selection criteria for patients with chronic ankle instability in controlled research: a position statement of the International Ankle Consortium

    NARCIS (Netherlands)

    Gribble, P.A.; Delahunt, E.; Bleakley, C.; Caulfield, B.; Docherty, C.; Fourchet, F.; Fong, D.T.; Hertel, J.; Hiller, C.; Kaminski, T.; McKeon, P.; Refshauge, K.; Wees, P.J. van der; Vincenzino, B.; Wikstrom, E.

    2014-01-01

    While research on chronic ankle instability (CAI) and awareness of its impact on society and health care systems has grown substantially in the last 2 decades, the inconsistency in participant/patient selection criteria across studies presents a potential obstacle to addressing the problem properly.

  16. Regulatory principles, criteria and guidelines for site selection, design, construction and operation of uranium tailings retention systems

    International Nuclear Information System (INIS)

    Coady, J.R.; Henry, L.C.

    1978-01-01

    Principles, criteria and guidelines developed by the Atomic Energy Control Board for the management of uranium mill tailings are discussed. The application of these concepts is considered in relation to site selection, design and construction, operation and decommissioning of tailings retention facilities

  17. 34 CFR 225.11 - What selection criteria does the Secretary use in evaluating an application for a Credit...

    Science.gov (United States)

    2010-07-01

    ... EDUCATION, DEPARTMENT OF EDUCATION CREDIT ENHANCEMENT FOR CHARTER SCHOOL FACILITIES PROGRAM How Does the... school facilities programs, their performance in implementing these grants. (d) Quality of project... 34 Education 1 2010-07-01 2010-07-01 false What selection criteria does the Secretary use in...

  18. 34 CFR 226.12 - What selection criteria does the Secretary use in evaluating an application for a State Charter...

    Science.gov (United States)

    2010-07-01

    ... SECONDARY EDUCATION, DEPARTMENT OF EDUCATION STATE CHARTER SCHOOL FACILITIES INCENTIVE PROGRAM How Does the... facilities on a per-pupil basis. (b) Quality of plan. (1) The likelihood that the proposed grant project will... 34 Education 1 2010-07-01 2010-07-01 false What selection criteria does the Secretary use in...

  19. 7 CFR 170.12 - What are the selection criteria for participation in the USDA Farmers Market?

    Science.gov (United States)

    2010-01-01

    ... referred to the Internal Revenue Service or a tax advisor. Receipts for donated foods may be obtained from... Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices... Farmers Market? The selection criteria are designed to ensure a consistently high level of quality and...

  20. 20 CFR 670.450 - How are applicants who meet eligibility and selection criteria assigned to centers?

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false How are applicants who meet eligibility and selection criteria assigned to centers? 670.450 Section 670.450 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR THE JOB CORPS UNDER TITLE I OF THE WORKFORCE INVESTMENT ACT Recruitment...

  1. Evolvability Search: Directly Selecting for Evolvability in order to Study and Produce It

    DEFF Research Database (Denmark)

    Mengistu, Henok; Lehman, Joel Anthony; Clune, Jeff

    2016-01-01

    of evolvable digital phenotypes. Although some types of selection in evolutionary computation indirectly encourage evolvability, one unexplored possibility is to directly select for evolvability. To do so, we estimate an individual's future potential for diversity by calculating the behavioral diversity of its...... immediate offspring, and select organisms with increased offspring variation. While the technique is computationally expensive, we hypothesized that direct selection would better encourage evolvability than indirect methods. Experiments in two evolutionary robotics domains confirm this hypothesis: in both...... domains, such Evolvability Search produces solutions with higher evolvability than those produced with Novelty Search or traditional objective-based search algorithms. Further experiments demonstrate that the higher evolvability produced by Evolvability Search in a training environment also generalizes...

  2. Development of a selective agar plate for the detection of Campylobacter spp. in fresh produce.

    Science.gov (United States)

    Yoo, Jin-Hee; Choi, Na-Young; Bae, Young-Min; Lee, Jung-Su; Lee, Sun-Young

    2014-10-17

    This study was conducted to develop a selective medium for the detection of Campylobacter spp. in fresh produce. Campylobacter spp. (n=4), non-Campylobacter (showing positive results on Campylobacter selective agar) strains (n=49) isolated from fresh produce, indicator bacteria (n=13), and spoilage bacteria isolated from fresh produce (n=15) were plated on four Campylobacter selective media. Bolton agar and modified charcoal cefoperazone deoxycholate agar (mCCDA) exhibited higher sensitivity for Campylobacter spp. than did Preston agar and Hunt agar, although certain non-Campylobacter strains isolated from fresh produce by using a selective agar isolation method, were still able to grow on Bolton agar and mCCDA. To inhibit the growth of non-Campylobacter strains, Bolton agar and mCCDA were supplemented with 5 antibiotics (rifampicin, polymyxin B, sodium metabisulfite, sodium pyruvate, ferrous sulfate) and the growth of Campylobacter spp. (n=7) and non-Campylobacter strains (n=44) was evaluated. Although Bolton agar supplemented with rifampicin (BR agar) exhibited a higher selectivity for Campylobacter spp. than did mCCDA supplemented with antibiotics, certain non-Campylobacter strains were still able to grow on BR agar (18.8%). When BR agar with various concentrations of sulfamethoxazole-trimethoprim were tested with Campylobacter spp. (n=8) and non-Campylobacter (n=7), sulfamethoxazole-trimethoprim was inhibitory against 3 of 7 non-Campylobacter strains. Finally, we validated the use of BR agar containing 50mg/L sulfamethoxazole (BRS agar) or 0.5mg/L ciprofloxacin (BRCS agar) and other selective agars for the detection of Campylobacter spp. in chicken and fresh produce. All chicken samples were positive for Campylobacter spp. when tested on mCCDA, BR agar, and BRS agar. In fresh produce samples, BRS agar exhibited the highest selectivity for Campylobacter spp., demonstrating its suitability for the detection of Campylobacter spp. in fresh produce. Copyright

  3. A new spatial multi-criteria decision support tool for site selection for implementation of managed aquifer recharge.

    Science.gov (United States)

    Rahman, M Azizur; Rusteberg, Bernd; Gogu, R C; Lobo Ferreira, J P; Sauter, Martin

    2012-05-30

    This study reports the development of a new spatial multi-criteria decision analysis (SMCDA) software tool for selecting suitable sites for Managed Aquifer Recharge (MAR) systems. The new SMCDA software tool functions based on the combination of existing multi-criteria evaluation methods with modern decision analysis techniques. More specifically, non-compensatory screening, criteria standardization and weighting, and Analytical Hierarchy Process (AHP) have been combined with Weighted Linear Combination (WLC) and Ordered Weighted Averaging (OWA). This SMCDA tool may be implemented with a wide range of decision maker's preferences. The tool's user-friendly interface helps guide the decision maker through the sequential steps for site selection, those steps namely being constraint mapping, criteria hierarchy, criteria standardization and weighting, and criteria overlay. The tool offers some predetermined default criteria and standard methods to increase the trade-off between ease-of-use and efficiency. Integrated into ArcGIS, the tool has the advantage of using GIS tools for spatial analysis, and herein data may be processed and displayed. The tool is non-site specific, adaptive, and comprehensive, and may be applied to any type of site-selection problem. For demonstrating the robustness of the new tool, a case study was planned and executed at Algarve Region, Portugal. The efficiency of the SMCDA tool in the decision making process for selecting suitable sites for MAR was also demonstrated. Specific aspects of the tool such as built-in default criteria, explicit decision steps, and flexibility in choosing different options were key features, which benefited the study. The new SMCDA tool can be augmented by groundwater flow and transport modeling so as to achieve a more comprehensive approach to the selection process for the best locations of the MAR infiltration basins, as well as the locations of recovery wells and areas of groundwater protection. The new spatial

  4. Opportunity for Stakeholder Input on EPA's Hydraulic Fracturing Research Study: Criteria for Selecting Case Studies

    Science.gov (United States)

    EPA sought advice from stakeholders regarding potential case studies, stakeholder were invited to provide suggestions and refinements to the prioritization of criteria and information listed in Table 1 of the document.

  5. Assessment of the bases for selecting criteria for protection against tornado-entrained debris

    International Nuclear Information System (INIS)

    Read, J.B.J.; Bell, L.W.

    1977-05-01

    The probabilities and consequences of the acceleration of solid objects by air motion within a tornado are discussed, in order to assess the risks of damage from tornado missiles. Design criteria for protection against tornado missile risks are suggested

  6. APPLICATION OF AHP METHOD IN THE IDENTIFICATION AND CLASSIFICATION OF PROJECT SELECTION CRITERIA: AN ENERGY SECTOR CASE STUDY

    Directory of Open Access Journals (Sweden)

    Silvério, Adriano Augusto

    2015-07-01

    Full Text Available Choosing from several alternative investment projects in hydropower to build a portfolio of projects is a complex matter. The most commonly used selection model for building the portfolio is the financial method, however it constraints options investments to the economic and financial parameters, which are limiting in nature. Alternatively, this paper proposes the use of multicriterial method Analytic Hierarchy Process – AHP, which incorporates measures to evaluate both quantitative and qualitative data. This method is based on criteria or parameters of operational processes that hinder or facilitate the execution of projects. In order to get the definition of the set of criteria, the Delphi technique was applied to a group of seven experts in managing hydropower projects. Main results show that essential criteria for selection of project investment portfolio, are not limited to financial aspects, but it involves criteria of bureaucratic, organizational, and political environment and technological characters. The conclusion is that the financial potential of hydropower projects are not the only determinants for investments on hydropower projects and, at large, these project are conditioned to other criteria such as, those of bureaucratic and technological nature.

  7. Criteria Considered in Selecting Feed Items for Americium-241 Oxide Production Operations

    Energy Technology Data Exchange (ETDEWEB)

    Schulte, Louis D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-01-30

    The analysis in this document serves the purpose of defining a number of attributes in selection of feed items to be utilized in recovery/recycle of Pu and also production operations of 241AmO2 material intended to meet specification requirements. This document was written in response to a specific request on the part of the 2014 annual program review which took place over the dates of October 28-29, 2014. A number of feed attributes are noted including: (1) Non-interference with existing Pu recovery operations; (2) Content of sufficient 241Am to allow process efficiency in recovery operations; (3) Absence of indications that 243Am might be mixed in with the Pu/241Am material; (4) Absence of indications that Cm might be mixed in with the Pu/241Am material; (5) Absence of indications of other chemical elements that would present difficulty in chemical separation from 241Am; (6) Feed material not expected to present difficulty in dissolution; (7) Dose issues; (8) Process efficiency; (9) Size; (10) Hazard associated with items and package configuration in the vault; (11) Within existing NEPA documentation. The analysis in this document provides a baseline of attributes considered for feed materials, but does not presume to replace the need for technical expertise and judgment on the part of individuals responsible for selecting the material feed to be processed. This document is not comprehensive as regards all attributes that could prove to be important. The value of placing a formal QA hold point on accepting feed items versus more informal management of feed items is discussed in the summation of this analysis. The existing planned QA hold points on 241AmO2 products produced and packaged may be adequate as the entire project is based on QA of the product rather than QA of the process. The probability of introduction of items that would inherently cause the241

  8. Assessment of somatotype in young voleyball players: Validity as criteria to select young sports talents

    Directory of Open Access Journals (Sweden)

    Luís Carrasco Páez

    2008-06-01

    Full Text Available The anthropometric characteristics of athletes can determine their sporting performance. For this reason, we’ve defined the somatotype of young volleyball players in order to be able to control their sports training and to ensure their appropriate athletic development. In the present investigation 154 male and female volleyball players (aged from 12 to 14 years were analyzed. Data were collected according to the ISAK protocol. The results show an endomesomorphic profile for male and female volleyball players agreeing with the predominant profile at these ages. However, after comparing these data with results obtained in other studies, we observed a certain homogeneity in the male somatotype, invalidating the current trend of using this parameter as criteria to select young sports talent. However, somatotype could be a factor to take into account with female athletes, since their profile is much more heterogeneous. ResumoLas características antropométricas de los deportistas pueden determinar su rendimiento deportivo. Por esa razón se pretende conocer el somatotipo de jugadores infantiles de voleibol para poder así, controlar el entrenamiento y asegurar un adecuado desarrollo de los deportistas. En este estudio se analizaron 154 jugadores/as, con edades comprendidas entre 12 y 14 años. Los datos se extrajeron según las técnicas recomendadas por la ISAK (2001. Los resultados mostraron um perfil endomesomorfo tanto en chicos como en chicas, lo que concuerda con el perfil predominante en estas edades. Por otra parte, al comparar el somatotipo de estos jugadores con el de otros estudios observamos una cierta homogeneidad en el caso de los chicos, lo que invalidaría la tendencia actual de usar este parámetro como criterio para la selección de jóvenes talentos deportivos. Sin embargo, si podría ser un elemento a tener en cuenta en el caso de las chicas, ya que su perfil es mucho más heterogéneo.

  9. Trees in Urban and City Environments: a review of the selection criteria with particular reference to nature conservation in New Zealand Cities

    Directory of Open Access Journals (Sweden)

    (Late David Given

    2008-07-01

    Full Text Available The overall aim of this research was to review the general criteria for selection of trees for urban environments and city environments. The reason for this research was to assess the extent to which criteria for tree selection can contribute to nature conservation in cities. We conducted an extensive review of the literature, looking for publications about the selection criteria. In particular, we looked for any previous published reviews of the criteria. With reference to the criteria used in New Zealand, we undertook an unstructured review of the practices adopted in most cities. A review of the literature revealed many publications about different criteria but only one publication in which there was a general review of the criteria used for selecting trees for urban environments. By way of contrast, lists of tree species deemed to be suitable (or unsuitable for urban planting are widely available, and some include information about selection criteria, but often with little background explanation. Worldwide, commonly used criteria included commercial availability of species, compatibility with urban environments, landscape design, low maintenance, avoidance of nuisance factors and historical practice. The most common criteria are concerned with the concept of choosing species compatible with local climate and soils. Anecdotal evidence suggests that more and more cities are using a mix of criteria including those that may contribute to conservation and restoration of native biota. We suggest that there should be greater use of ecological, genetic and biogeographical criteria to meet the needs of nature conservation in New Zealand cities.

  10. Criteria selection for the assessment of Serbian lignites tendency to form deposits on power boilers heat transfer surfaces

    Directory of Open Access Journals (Sweden)

    Mladenović Milica

    2009-01-01

    Full Text Available Based on investigations of ash deposit formation, semi-empirical indicators for slagging and fouling, based on ash chemical composition and its fusion temperature, have been determined. These criteria-indicators, in suggested limits, describe the coals on which they are based (North-American and British well. However, the experience in the thermal power production sector of Serbia shows that their literal application to domestic coals does not produce satisfactory results. This contribution provides an analysis of applicability and the choice of criteria that are suitable for Serbian coals. The focus of the contribution is on coal slagging indicators, since slagging has much heavier consequences on heat transfer inside the steam boiler, and on boiler operation as a whole. The basis for the analysis of chosen criteria comprises of the results of investigations of four coal fields - Kostolac, Kolubara, Kosovo (Serbia, and Ugljevik (Bosnia and Herzegovina.

  11. Parameters and criteria influencing the selection of waste emplacement configurations in mined geologic repositories

    International Nuclear Information System (INIS)

    Bechthold, W.; Closs, K.D.; Papp, R.

    1988-01-01

    Reference concepts for repositories in deep geological formations have been developed in several countries. For these concepts, emplacement configurations vary within a wide range that comprises drift emplacement of unshielded or self-shielded packages and horizontal or vertical borehole emplacement. This is caused by different parameters, criteria, and criteria weighting factors. Examples for parameters are the country's nuclear power program and waste management policy, its geological situation, and safety requirements, examples for criteria and repository area requirements, expenditures of mining and drilling, and efforts for emplacement and, if required, retrieval. Due to the variety of these factors and their ranking in different countries, requirements for a safe, dependable and cost-effective disposal of radioactive waste can be met in various ways

  12. Air Conditioner Selection with TOPSIS and VIKOR Methods In Multi Criteria Decision Making

    Directory of Open Access Journals (Sweden)

    İrfan ERTUĞRUL

    2014-06-01

    Full Text Available Technological and global changes nowadays enable air conditioning sector to gain a higher importance. Short and long term risks for comsumers, the use of air conditioningtechnology with cost minimization, the increase of product charesteristics and firms, and the variability of product features have led to the need for multi-criteria decision. Therefore, caring the multiple criteria and the alternatives, the multi-criteria decision making techniques are taken to the scope of application. The purpose of the study is to determine the factors which affect the decision of air conditioning choice and to present the preference ranking suggestion. Having the nearly have got the approximately equivalent heating and cooling capacity, air conditionings in A+ class are included in the scope of related research. In application, when choosing air conditioning products, Topsis and Vikor that are multi-criteria decision-making methods are used and the results are compared and evaluated. When choosing air conditioning products, preference plansa re presented in the application.

  13. Breeding seasons, molt patterns, and gender and age criteria for selected northeastern Costa Rican resident landbirds

    Science.gov (United States)

    Jared D. Wolfe; Peter Pyle; C. John. Ralph

    2009-01-01

    Detailed accounts of molt and breeding cycles remain elusive for the majority of resident tropical bird species. We used data derived from a museum review and 12 years of banding data to infer breeding seasonality, molt patterns, and age and gender criteria for 27 common landbird species in northeastern Costa Rica. Prealternate molts appear to be rare, only occurring...

  14. Discrepancies between selected Pareto optimal plans and final deliverable plans in radiotherapy multi-criteria optimization.

    Science.gov (United States)

    Kyroudi, Archonteia; Petersson, Kristoffer; Ghandour, Sarah; Pachoud, Marc; Matzinger, Oscar; Ozsahin, Mahmut; Bourhis, Jean; Bochud, François; Moeckli, Raphaël

    2016-08-01

    Multi-criteria optimization provides decision makers with a range of clinical choices through Pareto plans that can be explored during real time navigation and then converted into deliverable plans. Our study shows that dosimetric differences can arise between the two steps, which could compromise the clinical choices made during navigation. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  15. Final disposal of radioactive wastes. Site selection criteria. Technical and economical factors

    International Nuclear Information System (INIS)

    Granero, J.J.

    1984-01-01

    General considerations, geological and socioeconomical criteria for final disposal of radioactive wastes in geological formations are treated. More attention is given to the final disposal of high level radioactive wastes and different solutions searched abroad which seems of interest for Spain. (author)

  16. 25 CFR 1001.9 - Selection criteria for tribes/consortia seeking advance planning grant funding.

    Science.gov (United States)

    2010-04-01

    ... notice will identify the specific details for applying. (d) What criteria will be used to award planning... planning grant funding. 1001.9 Section 1001.9 Indians OFFICE OF THE ASSISTANT SECRETARY, INDIAN AFFAIRS... advance planning grant funding. (a) Who is eligible to apply for a planning grant that will be awarded...

  17. 34 CFR 644.21 - What selection criteria does the Secretary use?

    Science.gov (United States)

    2010-07-01

    ... including, but not limited to, the project's organizational structure, the time committed to the project by... criteria to evaluate an application for a new grant: (a) Need for the project (24 points). The Secretary evaluates the need for an Educational Opportunity Centers project in the proposed target area on the basis...

  18. Novel and conventional working fluid mixtures for solar Rankine cycles: Performance assessment and multi-criteria selection

    International Nuclear Information System (INIS)

    Mavrou, Paschalia; Papadopoulos, Athanasios I.; Stijepovic, Mirko Z.; Seferlis, Panos; Linke, Patrick; Voutetakis, Spyros

    2015-01-01

    This work investigates the performance of working fluid mixtures for use in solar ORC (Organic Rankine Cycle systems) with heat storage employing FPC (Flat Plate Collectors). Several mixtures are considered including conventional choices often utilized in ORC as well as novel mixtures previously designed using advanced computer aided molecular design methods (Papadopoulos et al., 2013). The impact of heat source variability on the ORC performance is assessed for different working fluid mixtures. Solar radiation is represented in detail through actual, hourly averaged data for an entire year. A multi-criteria mixture selection methodology unveils important trade-offs among several important system operating parameters and efficiently highlights optimum operating ranges. Such parameters include the ORC thermal efficiency, the net generated power, the volume ratio across the turbine, the mass flow rate of the ORC working fluid, the evaporator temperature glide, the temperature drop in the storage tank, the ORC total yearly operating duration, the required collector aperture area to generate 1 kW of power and the irreversibility. A mixture of neopentane – 2-fluoromethoxy-2-methylpropane at 70% neopentane is found to be the most efficient in all the considered criteria simultaneously. - Highlights: • Investigation of novel and conventional working fluid mixtures for solar ORCs. • Systematic, multi-criteria assessment methodology for mixture selection. • Simultaneous consideration of multiple important mixture performance criteria. • Effects of year-round solar variability in a solar ORC with heat storage tank

  19. A COPRAS-F base multi-criteria group decision making approach for site selection of wind farm

    Directory of Open Access Journals (Sweden)

    Nikhil Chandra Chatterjee

    2013-01-01

    Full Text Available Today global warming is on the rise and the natural resources are getting consumed at a faster rate. Power consumption has increased many folds to cater the human need. Thus renewable energy resources are the only option available at this juncture. Wind energy is one of the renewable energy. Location selection for wind farm takes an important role on power generation. However, the location selection is a complex multicriteria problem due to the criteria factors which are conflicting in nature as well as uncertain. The process becomes more complex when a group of decision makers are involved in decision making. In the present study, a COPRAS (COmplex PRoportional ASsessment based multi-criteria decision-making (MCDM methodology is done under fuzzy environment with the help of multiple decision makers. More specifically, this study is aimed to focus the applicability of COPRAS-F as a strategic decision making tools to handle the group decision-making problems.

  20. Pairing Animal Cartoon Characters With Produce Stimulates Selection Among Child Zoo Visitors.

    Science.gov (United States)

    Karpyn, Allison; Allen, Michael; Marks, Samantha; Filion, Nicole; Humphrey, Debora; Ye, Ai; May, Henry; Gardner, Meryl P

    2017-08-01

    In order to address the pervasive trend of underconsumption of fruits and vegetables among children, we examined the hypothesis that children would be more likely to select fruits (apple slices, bananas, and oranges) and vegetables (baby carrots) when paired with animal cartoon image than when available without the character image. Tested in a randomized experiment using counterbalancing, products were arranged on two tables at two separate family fun nights held at a local zoo. Animal character produce parings were manipulated by placing one of two animals (tamarin or iguana) next to two of the four fruit or vegetable selections at each table, and by changing when available without the image. In total, 755 produce selections were made. Significantly more products paired with a character were selected (62.38%) than the same products, not paired (37.62%), χ 2 = 46.32, df = 1, p < .001. The odds ratio of the treatment versus control was 1.66 (i.e., 471/284), indicating that children were 66% more likely to select a snack when paired with an animal cartoon. Study findings highlight the positive impact of animal cartoons on children's fruit and vegetable snack selections, and results suggest the potential for using animal cartoons to encourage fruit and vegetable selection for children.

  1. Traction batteries for industrial trucks. Technical aspects, selection criteria, operation. Antriebsbatterien fuer Flurfoerderzeuge. Technik, Auswahlkriterien und Betrieb

    Energy Technology Data Exchange (ETDEWEB)

    Roedig, W

    1987-01-01

    This lavishly illustrated booklet presents an introduction to the technology of the lead battery, which is commonly used as traction battery for industrial trucks. Technical specifications and standards, selection criteria for batteries and the novel CSM battery technology are mentioned. Most of the book deals with the practical aspects of batteries, e.g. installation, starting, maintenance, servicing, battery change, battery charging, monitoring, measurement, etc.). Battery recycling is briefly gone into.

  2. InterTechnology Corporation proposed criteria and recommendations for selection of PON non-residential demonstration sites

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    This report has been prepared with the objective of providing ERDA with recommended procedures for implementing the strategies set forth in the Systems Level Plan which are considered essential to the success of the National Demonstration Program. In order to logically develop these recommendations, this report is divided into three sections: A. Overview of the Demonstration Program to date. B. Essential Overall Program Strategies. C. Candidate Screening and Selection Criteria. (WDM)

  3. Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects

    NARCIS (Netherlands)

    J. van der Stok (Johan); O.P. van der Jagt (Olav); S. Amin Yavari (Saber); M.F.P. de Haas (Mirthe); J.H. Waarsing (Jan); H. Jahr (Holger); E.M.M. van Lieshout (Esther); P. Patka (Peter); J.A.N. Verhaar (Jan); A.A. Zadpoor (Amir Abbas); H.H. Weinans (Harrie)

    2013-01-01

    textabstractPorous titanium scaffolds have good mechanical properties that make them an interesting bone substitute material for large bone defects. These scaffolds can be produced with selective laser melting, which has the advantage of tailoring the structure's architecture. Reducing the strut

  4. Path analysis and multi-criteria decision making: an approach for multivariate model selection and analysis in health.

    Science.gov (United States)

    Vasconcelos, A G; Almeida, R M; Nobre, F F

    2001-08-01

    This paper introduces an approach that includes non-quantitative factors for the selection and assessment of multivariate complex models in health. A goodness-of-fit based methodology combined with fuzzy multi-criteria decision-making approach is proposed for model selection. Models were obtained using the Path Analysis (PA) methodology in order to explain the interrelationship between health determinants and the post-neonatal component of infant mortality in 59 municipalities of Brazil in the year 1991. Socioeconomic and demographic factors were used as exogenous variables, and environmental, health service and agglomeration as endogenous variables. Five PA models were developed and accepted by statistical criteria of goodness-of fit. These models were then submitted to a group of experts, seeking to characterize their preferences, according to predefined criteria that tried to evaluate model relevance and plausibility. Fuzzy set techniques were used to rank the alternative models according to the number of times a model was superior to ("dominated") the others. The best-ranked model explained above 90% of the endogenous variables variation, and showed the favorable influences of income and education levels on post-neonatal mortality. It also showed the unfavorable effect on mortality of fast population growth, through precarious dwelling conditions and decreased access to sanitation. It was possible to aggregate expert opinions in model evaluation. The proposed procedure for model selection allowed the inclusion of subjective information in a clear and systematic manner.

  5. Selection criteria for patients with chronic ankle instability in controlled research: a position statement of the International Ankle Consortium.

    Science.gov (United States)

    Gribble, Phillip A; Delahunt, Eamonn; Bleakley, Chris; Caulfield, Brian; Docherty, Carrie; Fourchet, François; Fong, Daniel Tik-Pui; Hertel, Jay; Hiller, Claire; Kaminski, Thomas; McKeon, Patrick; Refshauge, Kathryn; van der Wees, Philip; Vincenzino, Bill; Wikstrom, Erik

    2014-07-01

    While research on chronic ankle instability (CAI) and awareness of its impact on society and health care systems has grown substantially in the last 2 decades, the inconsistency in participant/patient selection criteria across studies presents a potential obstacle to addressing the problem properly. This major gap within the literature limits the ability to generalise this evidence to the target patient population. Therefore, there is a need to provide standards for patient/participant selection criteria in research focused on CAI with justifications using the best available evidence. The International Ankle Consortium provides this position paper to present and discuss an endorsed set of selection criteria for patients with CAI based on the best available evidence to be used in future research and study designs. These recommendations will enhance the validity of research conducted in this clinical population with the end goal of bringing the research evidence to the clinician and patient. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  6. Investigating the Effect of Normalization Norms in Flexible Manufacturing Sytem Selection Using Multi-Criteria Decision-Making Methods

    Directory of Open Access Journals (Sweden)

    Prasenjit Chatterjee

    2014-07-01

    Full Text Available The main objective of this paper is to assess the effect of different normalization norms within multi-criteria decisionmaking (MADM models. Three well accepted MCDM tools, namely, preference ranking organization method for enrichment evaluation (PROMETHEE, grey relation analysis (GRA and technique for order preference by similarity to ideal solution (TOPSIS methods are applied for solving a flexible manufacturing system (FMS selection problem in a discrete manufacturing environment. Finally, by the introduction of different normalization norms to the decision algorithms, its effct on the FMS selection problem using these MCDM models are also studied.

  7. POD NUMBER AND PHOTOSYNTHESIS AS PHYSIOLOGICAL SELECTION CRITERIA IN SOYBEAN (Glycine max L. Merrill BREEDING FOR HIGH YIELD

    Directory of Open Access Journals (Sweden)

    S.M. Sitompul

    2015-02-01

    Full Text Available Field studies were conducted in two years using 638 F2 and 1185 F3 lines of selected 16 F1 and 15 F2 parent lines (³80 pods plant-1 to evaluate pod number and CO2 exchange rate (CER as selection criteria. Pod and seed number, and seed weight of individual lines were observed during harvesting time, and CER of randomly selected 32 F2 and 30 F3 lines was measured at initial seed filling stage. The selection of F2 lines based on pod number to generate F3 lines increased the average of seed yield by 39%, and pod number by 77% in F3 lines compared with F2 lines. A close relationships was found between seed weight and pod or seed number per plant. Net CER responded sensitively to a reduction of light in a short-term and showed 78% of F2 lines and all F3 lines with maximum CER (Pmax³20 mmolCO2.m-2.s-1. The ratio of pod number per plant and Pmax varied between lines and were used to group lines resulting in close relationships between Pmax and pod number. It is concluded that the use of pod number and CER (Pmax as selection criteria offers an alternative approach in soybean breeding for high yield.

  8. Multi-Criteria selection of technology for processing ore raw materials

    Science.gov (United States)

    Gorbatova, E. A.; Emelianenko, E. A.; Zaretckii, M. V.

    2017-10-01

    The development of Computer-Aided Process Planning (CAPP) for the Ore Beneficiation process is considered. The set of parameters to define the quality of the Ore Beneficiation process is identified. The ontological model of CAPP for the Ore Beneficiation process is described. The hybrid choice method of the most appropriate variant of the Ore Beneficiation process based on the Logical Conclusion Rules and the Fuzzy Multi-Criteria Decision Making (MCDM) approach is proposed.

  9. Reaching Mars: multi-criteria R&D portfolio selection for Mars exploration technology planning

    Science.gov (United States)

    Smith, J. H.; Dolgin, B. P.; Weisbin, C. R.

    2003-01-01

    The exploration of Mars has been the focus of increasing scientific interest about the planet and its relationship to Earth. A multi-criteria decision-making approach was developed to address the question, Given a Mars program composed of mission concepts dependent on a variety of alternative technology development programs, which combination of technologies would enable missions to maximize science return under a constrained budget?.

  10. Who Should They Relate To? A Study For the Identification and Analysis of Criteria to the Partners’ Selection in Inter-Organizational Networks

    Directory of Open Access Journals (Sweden)

    Denise Rossato Quatrin

    2017-01-01

    Full Text Available The selection of partners is strategic in inter-organizational networks. One of the most important aspects is the definition of criteria for selection, that are the minimal characteristics required from those prospected. This study aimed to identify the most important criteria for the selection of members in horizontal inter-organizational networks, also describing their influence on network activities. First, we applied 120 questionnaires to managers of inter-organizational networks to identify the degree of importance of criteria previously treated in the literature. After, we interviewed 16 managers enabling us to identify other criteria, as well as understanding their influence on network activities. All of the 20 criteria from the literature were considered with significant importance by managers and the following criteria were added: trustworthiness, entrepreneur’s profile and company lifetime. The results aim to contribute to the selection of partners and provide information for the construction of the inter-organizational networks literature.

  11. 34 CFR 477.21 - What selection criteria does the Secretary use?

    Science.gov (United States)

    2010-07-01

    ... employment practices, will ensure that its personnel are selected for employment without regard to race, color, national origin, gender, age, or handicapping condition. (2) To determine personnel...

  12. Selection of Children for the KEEP Demonstration School: Criteria, Procedures, and Results. Technical Report #13.

    Science.gov (United States)

    Mays, Violet; And Others

    This brief report describes the selection of the pupil population of the Kamehameha Early Education Program (KEEP) Demonstration School. The pupil population must be representative of the Kalihi community (an urban area of Honolulu) from which it is drawn. An attempt was made to include 75% Hawaiian and 25 % Non-Hawaiian children, to select equal…

  13. 34 CFR 412.21 - What selection criteria does the Secretary use?

    Science.gov (United States)

    2010-07-01

    ... eligible to participate are selected without regard to race, color, national origin, gender, age, or... nondiscriminatory employment practices, will ensure that its personnel are selected for employment without regard to race, color, national origin, gender, age, or disability. (2) To determine the personnel qualifications...

  14. 34 CFR 411.21 - What selection criteria does the Secretary use?

    Science.gov (United States)

    2010-07-01

    ... eligible to participate are selected without regard to race, color, national origin, gender, age, or... employment practices, will ensure that its personnel are selected for employment without regard to race, color, national origin, gender, age, or disability. (2) To determine personnel qualifications under...

  15. Multi-criteria university selection : Formulation and implementation using a fuzzy AHP

    NARCIS (Netherlands)

    Salimi, N.; Rezaei, J.

    2015-01-01

    Collaboration with universities as ‘knowledge factories’ is increasingly perceived to be an effective and viable solution for firms to gain competitive advantage. One of the main challenges firms face in this area is how to select the best university for collaboration. This selection undoubtedly

  16. 34 CFR 490.21 - What selection criteria does the Secretary use?

    Science.gov (United States)

    2010-07-01

    ... project services and activities, especially resources of the public and private sectors; and (ii) The... selected without regard to race, color, national origin, gender, age, or disabling condition. (d... its personnel are selected for employment without regard to race, color, national origin, gender, age...

  17. An essential hospital package for South Africa--selection criteria, costs and affordability.

    Science.gov (United States)

    Söderlund, N

    1999-07-01

    In 1995 the Committee of Enquiry into National Health Insurance (NHI) recommended that formally employed individuals and their employers be required to fund at least a minimum package of hospital cover for workers and their dependents. This has recently been echoed in a Department of Health policy paper on social health insurance. This research aims to define and cost a minimum package of essential hospital care for competing (public and private) health insurers in South Africa. CRITERIA FOR PACKAGE DEFINITION: Based on the objectives implict in the NHI Committee report, the following criteria were used to define the essential package: (i) the extent to which there was another appropriate responsible party who should pay for treatment; (ii) the degree of discretion in deciding whether or not to provide treatment (roughly equivalent to 'urgency'); and (iii) the cost and effectiveness of treatment. On the basis of the above criteria, 396 out of 598 possible interventions were included in the package. Using local mine hospital and private sector utilisation rates and mine hospital cost data, it was estimated that the essential inpatient package would cost around R502 per enrollee per year, using 1998 prices, for a working age population and their dependents. Age-sex standardised outpatient care costs in the mine hospital population studied were estimated at R183 per person per year. It was therefore estimated that the total inpatient and outpatient hospital package would cost around R685 per person per year. The results presented in this paper are intended to inform the process of defining a national essential hospital benefit package. Assuming that contributions were proportionally related to income, and that costs should not exceed 6% of wages, the package should be affordable to all of those earning above R20,000 per year. Significant additional work is required, firstly at a technical level to assess the appropriateness of the prioritization approach used here

  18. A Hybrid Multiple Criteria Group Decision-Making Approach for Green Supplier Selection in the TFT-LCD Industry

    Directory of Open Access Journals (Sweden)

    Che-Wei Tsui

    2014-01-01

    Full Text Available The awareness of the need for environmental protection is increasing throughout the world. The focuses of green supplier selection are on considering environmental criteria and strengthening the competitiveness of the entire supply chain. The purpose of this study is to develop a green supplier selection procedure for the thin film transistor liquid crystal display (TFT-LCD industry using polarizer suppliers as an example. First, a decision framework for green supplier selection is developed based on literatures and the supplier audit forms provided by an anonymous flat panel display manufacturer in Taiwan. Then, a hybrid multiple criteria group decision-making (MCGDM method is proposed based on analytic hierarchy process (AHP, entropy, elimination and choice expressing the reality III (ELECTRE III, and the linear assignment method to assist the manufacturer in choosing among four polarizer suppliers. The final ranking results for green supplier selection and different opinions from each department are provided. An improvement report is suggested to enhance suppliers’ performance. For the evaluation procedure, most managers emphasize the importance of current capability and the capability of research and development. Furthermore, we found that the subsidiary supplier should improve quality control competence immediately to be considered as the potential candidate of primary supplier.

  19. 34 CFR 402.21 - What selection criteria does the Secretary use?

    Science.gov (United States)

    2010-07-01

    ... employment practices, will ensure that personnel for this project are selected for employment without regard to race, color, national origin, gender, age, or disabling condition. (2) To determine personnel...

  20. Multi criteria decision making approaches for green supplier evaluation and selection

    DEFF Research Database (Denmark)

    Govindan, Kannan; Rajendran, S.; Sarkis, J.

    2015-01-01

    A large and growing body of literature to supplier evaluation and selection exists. Literature on green supplier evaluation that considers environmental factors are relatively limited. Recently, in supply chain management decision making, approaches for evaluating green supplier performance have ...... us to identify improvements for green supplier selection process and possible future directions.......A large and growing body of literature to supplier evaluation and selection exists. Literature on green supplier evaluation that considers environmental factors are relatively limited. Recently, in supply chain management decision making, approaches for evaluating green supplier performance have...... used both qualitative and quantitative environmental data. Given this evolving research field, the goal and purpose of this paper is to analyze research in international scientific journals and international conference proceedings that focus on green supplier selection. We propose the following...

  1. Demands and criteria for the site selection from the view of the power plant owners

    International Nuclear Information System (INIS)

    Staebler, K.; Beising, R.

    1975-01-01

    Function of electricity supply utilities from the point of view of choice of site; energy business background; references to the mode of procedure in site selection; pragmatic principle of site choice. (HP) [de

  2. A hybrid approach identifies metabolic signatures of high-producers for chinese hamster ovary clone selection and process optimization.

    Science.gov (United States)

    Popp, Oliver; Müller, Dirk; Didzus, Katharina; Paul, Wolfgang; Lipsmeier, Florian; Kirchner, Florian; Niklas, Jens; Mauch, Klaus; Beaucamp, Nicola

    2016-09-01

    In-depth characterization of high-producer cell lines and bioprocesses is vital to ensure robust and consistent production of recombinant therapeutic proteins in high quantity and quality for clinical applications. This requires applying appropriate methods during bioprocess development to enable meaningful characterization of CHO clones and processes. Here, we present a novel hybrid approach for supporting comprehensive characterization of metabolic clone performance. The approach combines metabolite profiling with multivariate data analysis and fluxomics to enable a data-driven mechanistic analysis of key metabolic traits associated with desired cell phenotypes. We applied the methodology to quantify and compare metabolic performance in a set of 10 recombinant CHO-K1 producer clones and a host cell line. The comprehensive characterization enabled us to derive an extended set of clone performance criteria that not only captured growth and product formation, but also incorporated information on intracellular clone physiology and on metabolic changes during the process. These criteria served to establish a quantitative clone ranking and allowed us to identify metabolic differences between high-producing CHO-K1 clones yielding comparably high product titers. Through multivariate data analysis of the combined metabolite and flux data we uncovered common metabolic traits characteristic of high-producer clones in the screening setup. This included high intracellular rates of glutamine synthesis, low cysteine uptake, reduced excretion of aspartate and glutamate, and low intracellular degradation rates of branched-chain amino acids and of histidine. Finally, the above approach was integrated into a workflow that enables standardized high-content selection of CHO producer clones in a high-throughput fashion. In conclusion, the combination of quantitative metabolite profiling, multivariate data analysis, and mechanistic network model simulations can identify metabolic

  3. Can multi-criteria analysis models support the site selection for a repository for heat-generating waste?

    International Nuclear Information System (INIS)

    Gutberlet, Daniela

    2015-01-01

    The decision for or against a potential site for a nuclear waste repository is highly complex and requires decision-makers to consider multiple assessment criteria. The complexity of each site and its characteristics, and the differing opinions among members of the public and advocacy groups mean t hat conflicts of interest are likely to arise. In this paper, the author suggests that multi-criteria analysis models could be used to provide methodological support during the selection process. The models can map these types of decision situations and suggest coherent solutions with relatively little formal effort. They allow users to compare different opt ions simultaneously and ensure that t heir decision-making Is conscious rather than arbitrary.

  4. Landfill Site Selection by AHP Based Multi-criteria Decision Making Tool: A Case Study in Kolkata, India

    Science.gov (United States)

    Majumdar, Ankush; Hazra, Tumpa; Dutta, Amit

    2017-09-01

    This work presents a Multi-criteria Decision Making (MCDM) tool to select a landfill site from three candidate sites proposed for Kolkata Municipal Corporation (KMC) area that complies with accessibility, receptor, environment, public acceptability, geological and economic criteria. Analytical Hierarchy Process has been used to solve the MCDM problem. Suitability of the three sites (viz. Natagachi, Gangajoara and Kharamba) as landfills as proposed by KMC has been checked by Landfill Site Sensitivity Index (LSSI) as well as Economic Viability Index (EVI). Land area availability for disposing huge quantity of Municipal Solid Waste for the design period has been checked. Analysis of the studied sites show that they are moderately suitable for landfill facility construction as both LSSI and EVI scores lay between 300 and 750. The proposed approach represents an effective MCDM tool for siting sanitary landfill in growing metropolitan cities of developing countries like India.

  5. Comparative analysis of objective techniques for criteria weighing in two MCDM methods on example of an air conditioner selection

    Directory of Open Access Journals (Sweden)

    Vujičić Momčilo D.

    2017-01-01

    Full Text Available This paper deals with comparative analysis of two different types of objective techniques for criteria weighing: Entropy and CRITIC and two MCDM methods: MOORA and SAW on example of an air conditioner selection. We used six variants for calculation of normalized performance ratings. Results showed that the decision of the best air conditioner was basically independent of the MCDM method used, despite the applied technique for determination of criteria weights. Complete ranking within all of the combinations of methods and techniques with diverse ratio calculation variants showed that the best ranked air conditioner was A7, while the worst ones were A5 and A9. Significant positive correlation was obtained for almost all the pairs of variants in all the combinations except for the MOORA - CRITIC combination with SAW - Entropy combination to have the highest correlations between variants (p < 0.01.

  6. Multi criteria analysis in environmental management: Selecting the best stormwater erosion and sediment control measure in Malaysian construction sites

    Energy Technology Data Exchange (ETDEWEB)

    Al-Hadu, Ibrahiem Abdul Razak; Sidek, Lariyah Mohd; Desa, Mohamed Nor Mohamed [Civil Engineering, Universiti Tenga Nasional, Kajang, Selangor (Malaysia); Basri, Noor Ezlin Ahmad [Civil and Structural Engineering, Universiti Kebangsaan Malyasia, Bangi, Selangor (Malaysia)

    2011-07-01

    Malaysia located in a tropical region which is interested with a heavy rainfall through the whole seasons of the year. Construction stages usually associated with soil disturbing due to land clearing and grading activities, this combined with the tropical climate in Malaysia, will generate an enormous amount of soil to be eroded and then deposited in the adjacent water bodies. There are many kinds of mitigation measures used so as to reduce the impact of erosion and sedimentation that are generated due to the stormwater in construction sites. This paper presents the application of Multi Criteria Analysis (MCA) tool in choosing the best stormwater control measure by depending on specified criteria and criterion weight. The results obtained from the application of MCA in stormwater pollution control have many benefits to the contractors, consultants and decision makers by making them able to select the best control measure for every stage of construction.

  7. Application of risk-based multiple criteria decision analysis for selection of the best agricultural scenario for effective watershed management.

    Science.gov (United States)

    Javidi Sabbaghian, Reza; Zarghami, Mahdi; Nejadhashemi, A Pouyan; Sharifi, Mohammad Bagher; Herman, Matthew R; Daneshvar, Fariborz

    2016-03-01

    Effective watershed management requires the evaluation of agricultural best management practice (BMP) scenarios which carefully consider the relevant environmental, economic, and social criteria involved. In the Multiple Criteria Decision-Making (MCDM) process, scenarios are first evaluated and then ranked to determine the most desirable outcome for the particular watershed. The main challenge of this process is the accurate identification of the best solution for the watershed in question, despite the various risk attitudes presented by the associated decision-makers (DMs). This paper introduces a novel approach for implementation of the MCDM process based on a comparative neutral risk/risk-based decision analysis, which results in the selection of the most desirable scenario for use in the entire watershed. At the sub-basin level, each scenario includes multiple BMPs with scores that have been calculated using the criteria derived from two cases of neutral risk and risk-based decision-making. The simple additive weighting (SAW) operator is applied for use in neutral risk decision-making, while the ordered weighted averaging (OWA) and induced OWA (IOWA) operators are effective for risk-based decision-making. At the watershed level, the BMP scores of the sub-basins are aggregated to calculate each scenarios' combined goodness measurements; the most desirable scenario for the entire watershed is then selected based on the combined goodness measurements. Our final results illustrate the type of operator and risk attitudes needed to satisfy the relevant criteria within the number of sub-basins, and how they ultimately affect the final ranking of the given scenarios. The methodology proposed here has been successfully applied to the Honeyoey Creek-Pine Creek watershed in Michigan, USA to evaluate various BMP scenarios and determine the best solution for both the stakeholders and the overall stream health. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Selection of a suitable method for the preparation of polymeric nanoparticles: multi-criteria decision making approach.

    Science.gov (United States)

    Krishnamoorthy, Kannan; Mahalingam, Manikandan

    2015-03-01

    The present study is aimed to select the suitable method for preparation of camptothecin loaded polymeric nanoparticles by utilizing the multi-criteria decision making method. Novel approaches of drug delivery by formulation using nanotechnology are revolutionizing the future of medicine. Recent years have witnessed unprecedented growth of research and application in the area of nanotechnology. Nanoparticles have become an important area of research in the field of drug delivery because they have the ability to deliver a wide range of drug to varying areas of body. Despite of extensive research and development, polymeric nanoparticles are frequently used to improve the therapeutic effect of drugs. A number of techniques are available for the preparation of polymeric nanoparticles. The Analytical Hierarchy Process (AHP) is a method for decision making, which are derived from individual judgements for qualitative factors, using the pair-wise comparison matrix. In AHP, a decision hierarchy is constructed with a goal, criteria and alternatives. The model uses three main criteria 1) Instrument, 2) Process and Output and 3) Cost. In addition, there are eight sub-criteria's as well as eight alternatives. Pair-wise comparison matrixes are used to obtain the overall priority weight and ranking for the selection of suitable method. Nanoprecipitation technique is the most suitable method for the preparation of camptothecin loaded polymeric nanoparticles with the highest overall priority weight of 0.297 CONCLUSION: In particular, the result indicates that the priority weights obtained from AHP could be defined as a multiple output for finding out the most suitable method for preparation of camptothecin loaded polymeric nanoparticles.

  9. Site selection and rating process, and criteria for a social and political approach

    International Nuclear Information System (INIS)

    Boisseson, P. de; David, J.F.

    1998-01-01

    Full text of publication follows: sensitive projects have been for long the problem of engineers and geologists, which tried to exert a kind of mono-cultural approach upon decisions regarding: a type of technical solution, a choice for a location. Experience drawn from various projects shows that public choices must be targeted to public acceptance and not only to hard-science community. Ways of rating site for sensitive projects according to criteria derived from social and political approach have been set up to provide global advice to decision makers. Bases are found among: socio economical statistics (type and rate of employment), land use regulations, history of public and local acceptance of former projects or public regulations. Representations can be drawn through social modeling and qualitative analysis. They can be of an utmost importance in decision making process. (authors)

  10. Criteria for selecting a flue gas purification system for waste incineration plants

    Energy Technology Data Exchange (ETDEWEB)

    Mosch, H

    1985-12-01

    This paper evaluates the available systems with a view to three basic principles of gaseous effluent removal, relating to dust, SO/sub 2/, HCl and HF, by discussing criteria such as performance with regard to environmental hygiene, performance with regard to material or energy consumption, terms and conditions, operational conditions, and economics. The three methods discussed are: (1) Scrubbing and effluent treatment including evaporation and flue gas reheating or other means of treating the flue gas cooled down to about 65/sup 0/C. (2) Spray sorption by means of flash drying reactors, similar to the spray drying method. (3) Blow-in sorption, as the method may be called. The dry, powdered reagent, in general slack lime with at least 90 p.c. of Ca(OH)/sub 2/, is blown into the reactors. (orig./HP).

  11. Optimal site selection for sitting a solar park using multi-criteria decision analysis and geographical information systems

    Science.gov (United States)

    Georgiou, Andreas; Skarlatos, Dimitrios

    2016-07-01

    Among the renewable power sources, solar power is rapidly becoming popular because it is inexhaustible, clean, and dependable. It has also become more efficient since the power conversion efficiency of photovoltaic solar cells has increased. Following these trends, solar power will become more affordable in years to come and considerable investments are to be expected. Despite the size of solar plants, the sitting procedure is a crucial factor for their efficiency and financial viability. Many aspects influence such a decision: legal, environmental, technical, and financial to name a few. This paper describes a general integrated framework to evaluate land suitability for the optimal placement of photovoltaic solar power plants, which is based on a combination of a geographic information system (GIS), remote sensing techniques, and multi-criteria decision-making methods. An application of the proposed framework for the Limassol district in Cyprus is further illustrated. The combination of a GIS and multi-criteria methods produces an excellent analysis tool that creates an extensive database of spatial and non-spatial data, which will be used to simplify problems as well as solve and promote the use of multiple criteria. A set of environmental, economic, social, and technical constrains, based on recent Cypriot legislation, European's Union policies, and expert advice, identifies the potential sites for solar park installation. The pairwise comparison method in the context of the analytic hierarchy process (AHP) is applied to estimate the criteria weights in order to establish their relative importance in site evaluation. In addition, four different methods to combine information layers and check their sensitivity were used. The first considered all the criteria as being equally important and assigned them equal weight, whereas the others grouped the criteria and graded them according to their objective perceived importance. The overall suitability of the study

  12. Effective selection criteria for assessing the resistance of stink bugs complex in soybean

    Directory of Open Access Journals (Sweden)

    Fabiani da Rocha

    2014-10-01

    Full Text Available Soybean plants with resistance to the stink bug complex are currently selected by extremely labor-intensive methods, which limit the evaluation of a large number of genotypes. Thus, this paper proposed the use of an alternative trait underlying the selection of resistant genotypes under field conditions with natural infestation: the weight of healthy seeds (WHS. To this end, 24 genotypes were evaluated under two management systems: with systematic chemical control of insects (management I, and without control (management II. Different indices were calculated using grain weight (YP of management I and WHS of management II (YS . The high correlation between YS and the indices mean productivity, stress tolerance and geometric mean productivity, plus the agreement in determining the groups of genotypes with resistance and high yield indicate that WHS is a useful character in simultaneous selection for these traits.

  13. Site selection process for radioactive waste repository (radioactive facility) in Cuba as a fundamental safety criteria

    International Nuclear Information System (INIS)

    Vital, Jose Luis Peralta; Castillo, Reinaldo Gil; Chales Suarez, Gustavo; Rodriguez Reyes, Aymee

    1999-01-01

    The paper show the process of search carried out for the selection of the safest site in the National territory, in order to sitting the Facility (Repository) that will disposal the low and intermediate level radioactive wastes, as well as the possible Storage Facility for nuclear spent Fuel (radioactive wastes of high activity). We summarize the obtained Methodology and the Criterions of exclusion adopted for the development of the Process of site selection, as well as the current condition of the researches that will permit the obtaining of the nominative objectives. (author)

  14. Development of selective medium for IMP-type carbapenemase-producing Enterobacteriaceae in stool specimens.

    Science.gov (United States)

    Yamamoto, Norihisa; Kawahara, Ryuji; Akeda, Yukihiro; Shanmugakani, Rathina Kumar; Yoshida, Hisao; Hagiya, Hideharu; Hara, Naohiro; Nishi, Isao; Yukawa, Satomi; Asada, Rumiko; Sasaki, Yumi; Maeda, Kazuhiro; Sakamoto, Noriko; Hamada, Shigeyuki; Tomono, Kazunori

    2017-03-24

    Identification of carbapenemase-producing Enterobacteriaceae (CPE) in faecal specimens is challenging. This fact is particularly critical because low-level carbapenem-resistant organisms such as IMP-producing CPE are most prevalent in Japan. We developed a modified selective medium more suitable for IMP-type CPE. Fifteen reference CPE strains producing different types of β-lactamases were used to evaluate the commercially available CHROMagar KPC and chromID CARBA as well as the newly prepared MC-ECC medium (CHROMagar ECC supplemented with meropenem, cloxacillin, and ZnSO 4 ) and M-ECC medium (CHROMagar ECC supplemented with meropenem and ZnSO 4 ). A total of 1035 clinical samples were then examined to detect CPE using chromID CARBA and M-ECC medium. All tested strains producing NDM-, KPC-, and OXA-48-carbapenemases were successfully cultured in the media employed. Although most of the IMP-positive strains did not grow in CHROMagar KPC, chromID CARBA, or MC-ECC, all tested strains grew on M-ECC. When faecal samples were applied to the media, M-ECC medium allowed the best growth of IMP-type CPE with a significantly higher sensitivity (99.3%) than that of chromID CARBA (13.9%). M-ECC medium was determined as the most favourable selective medium for the detection of IMP-type CPE as well as other types of CPE.

  15. A geographic information system and multi criteria analysis method for site selection of spent nuclear fuel disposal

    International Nuclear Information System (INIS)

    Martins, Vivian Borges

    2009-01-01

    This thesis aims to develop a site selection methodology for the construction of final repository for the spent nuclear fuel disposal, by using geographic information systems (GIS) and multi-criteria decision analysis. Decision making processes of this kind are often complex, given the great number of space parameters to consider and also the typically conflicting opinions of the diverse stake holders. By using GIS, data from different space parameters can be quickly and reliably stored, treated and analyzed. Multi-criteria techniques allow for the incorporation of different stake holders' opinions. These tools, when jointly used, allow for the decision process to be more transparent, quick and reliable. The method developed was applied to the particular case of the state of Rio de Janeiro. Weights obtained from an expert panel and also by using the Hierarchical Analysis Method and cartographic data were combined in the GIS. The application showed that it is possible not only to select and classify areas as to their aptness for the proposed objective, but also to exclude those clearly inadequate areas, thus optimizing the selection process by reducing the search space and consequently minimizing costs and the time spent in the search. (author)

  16. Application of an integrated multi-criteria decision making AHP-TOPSIS methodology for ETL software selection.

    Science.gov (United States)

    Hanine, Mohamed; Boutkhoum, Omar; Tikniouine, Abdessadek; Agouti, Tarik

    2016-01-01

    Actually, a set of ETL software (Extract, Transform and Load) is available to constitute a major investment market. Each ETL uses its own techniques for extracting, transforming and loading data into data warehouse, which makes the task of evaluating ETL software very difficult. However, choosing the right software of ETL is critical to the success or failure of any Business Intelligence project. As there are many impacting factors in the selection of ETL software, the same process is considered as a complex multi-criteria decision making (MCDM) problem. In this study, an application of decision-making methodology that employs the two well-known MCDM techniques, namely Analytic Hierarchy Process (AHP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) methods is designed. In this respect, the aim of using AHP is to analyze the structure of the ETL software selection problem and obtain weights of the selected criteria. Then, TOPSIS technique is used to calculate the alternatives' ratings. An example is given to illustrate the proposed methodology. Finally, a software prototype for demonstrating both methods is implemented.

  17. Maintenance policy selection for ships: finding the most important criteria and considerations

    NARCIS (Netherlands)

    Goossens, Adriaan; Basten, Robertus Johannes Ida

    2016-01-01

    Maintenance of technical capital assets is gaining increasing attention, as maintenance is an important contributor to reach the intended life-time of these expensive assets. This paper focusses on maintenance policy selection (MPS) for ships using the Analytic Hierarchy Process. It builds on

  18. Geochemical site-selection criteria for HLW repositories in Europe and North America

    International Nuclear Information System (INIS)

    Savage, David; Arthur, Randolph C.; Sasamoto, Hiroshi; Shibata, Masahiro; Yui, Mikazu

    2000-01-01

    Geochemical as well as socio-economic issues associated with the selection of potential sites to host a high-level nuclear waste repository have received considerable attention in repository programs in Europe (Belgium, Finland, France, Germany, Spain, Sweden, Switzerland and the U.K.) and North America (Canada and the United States). The objective of the present study is to summarize this international experience with particular emphasis on geochemical properties that factor into the adopted site-selection strategies. Results indicate that the geochemical properties of a site play a subordinate role, at best, to other geotechnical properties in the international site-selection approaches. In countries where geochemical properties are acknowledged in the site-selection approach, requirements are stated qualitatively and tend to focus on associated impacts on the stability of the engineered barrier system and on radionuclide transport. Site geochemical properties that are likely to control the long-term stability of geochemical conditions and radionuclide migration behavior are unspecified, however. This non-prescriptive approach may be reasonable for purposes of screening among potential sites, but a better understanding of site properties that are most important in controlling the long-term geochemical evolution of the site over a range of possible scenarios would enable the potential sites to be ranked in terms of their suitability to host a repository. (author)

  19. Design and selection criteria of a commercial irradiation facility for spices and dry products

    International Nuclear Information System (INIS)

    Aggarwal, K.S.

    1990-01-01

    Apart from cost considerations, various factors which should be taken into consideration in design of a commercial irradiation facility for spices and dry products and the factors which a user should consider for selecting a food irradiator are discussed in brief. (author)

  20. 34 CFR 472.22 - What selection criteria does the Secretary use?

    Science.gov (United States)

    2010-07-01

    ... the business or industry partners or labor organizations. (Approved by the Office of Management and... extent to which the plan of management is effective and ensures proper and efficient administration of... are otherwise eligible to participate, are selected without regard to race, color, national origin...

  1. 7 CFR 1948.86 - Site development and acquisition grant selection criteria.

    Science.gov (United States)

    2010-01-01

    ...) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM SERVICE... considered in the selection of grantees: (1) Priority assigned and recommended funding level by the Governor in the State Investment Strategy for Energy Impacted Areas; (2) The increase in the number of new...

  2. Perceptions of the Selection Criteria of Omani English Language Teachers: Implications for Policy Reconsideration

    Science.gov (United States)

    Al-Issa, Ali; Al-Bulushi, Ali; Al-Zadjali, Rima

    2017-01-01

    Proficiency in the English language has been described as central for determining Non-Native English Speaking Teachers (N-NESTs) selection for joining the profession. The Ministry of Education in the Sultanate of Oman decided to set the score of Band 6 on the International English Language Testing System (IELTS) for accepting the English Language…

  3. 34 CFR 489.21 - What selection criteria does the Secretary use?

    Science.gov (United States)

    2010-07-01

    ... to provide project services and activities, especially resources of the public and private sectors... eligible to participate are selected without regard to race, color, national origin, gender, age, or..., gender, age, or disabling condition. (2) To determine personnel qualifications under paragraphs (f)(1) (i...

  4. Physiological, physical and on-ice performance criteria for selection of elite ice hockey teams

    Directory of Open Access Journals (Sweden)

    R Roczniok

    2016-01-01

    Full Text Available The purpose of this study was to examine physiological and physical determinants of ice-hockey performance in order to assess their impact on the result during a selection for ice hockey. A total of 42 ice hockey players took part in the selection camp. At the end of the camp 20 best players were selected by team of expert coaches to the ice hockey team and created group G1, while the second group (G2 consisted of not selected players (non-successful group Evaluation of goodness of fit of the model to the data was based on the Hosmer Lemeshow test Ice hockey players selected to the team were taller 181.95±4.02 cm, had lower % body fat 13.17±3.17%, a shorter time to peak power 2.47±0.35 s , higher relative peak power 21.34±2.41 W • kg-1 and higher relative total work 305.18±28.41 J • kg-1. The results of the aerobic capacity test showed significant differences only in case of two variables. Ice hockey players in the G1 had higher VO2max 4.07±0.31 l • min-1 values than players in the G2 as well as ice hockey players in G1 showed a higher level of relative VO2max 51.75±2.99 ml • min-1 • kg-1 than athletes in G2. Ice hockey players selected to the team (G1 performed better in the 30 m Forwards Sprint 4.28±0.31 s; 6x9 Turns 12.19±0.75 s; 6x9 stops 12.79±0.49 s and Endurance test (6x30 m stops 32.01±0.80 s than players in G2. The logistic regression model showed that the best predictors of success in the recruitment process of top level ice hockey players were time to peak power, relative peak power, VO2max and 30 m sprint forwards on ice. On the basis of the constructed predictive logistic regression model it will be possible to determine the probability of success of the athletes during following the selection processes to the team.

  5. What are the qualifications and selection criteria for women to be appointed to society journal editorial boards?

    Science.gov (United States)

    Tomizawa, Yasuko

    2014-02-01

    Japan ranks extremely low in global ranking of gender equality. It is not easy for female doctors to acquire leadership positions in member societies of the Japanese Association of Medical Science (JAMS). Very few women are included on editorial boards of English medical journals in Japan. Furthermore, until last year, there had been no female editors in English language journals of surgical societies. The qualifications and criteria for selecting editorial board members of medical journals should be clarified. Medical journals in Japan would gain diversity by including women on editorial boards in the same proportion as women membership in the corresponding medical societies.

  6. Material selection for the tool holder working under hard milling conditions using different multi criteria decision making methods

    International Nuclear Information System (INIS)

    Çalışkan, Halil; Kurşuncu, Bilal; Kurbanoğlu, Cahit; Güven, Şevki Yılmaz

    2013-01-01

    Highlights: ► The material selection problem for tool holders used in hard milling was solved. ► EXPROM2, TOPSIS and VIKOR methods were used for ranking the alternative materials. ► The weighting of criteria was performed by compromised weighting method. ► The best material for the tool holder was selected as Fe–5Cr–Mo–V aircraft steel. -- Abstract: Nowadays machining of materials in their hardened state, also called hard machining, is a challenge in production of tools and molds. It has some advantages such as lower process time and lower manufacturing cost when compared to conventional machining. In machining of hard workpiece materials, however, very high stresses act on the tool holder through the cutting tool. These stresses necessitate the tool holder to have some specific properties. Especially in hard milling, the tool holder should have high stiffness and should be able to dissipate the energy generated during interrupted cutting. Material cost of the tool holder is also important since lower costs provide a competitive advantage for manufacturers. The material selection for the tool holder should be conducted considering aforementioned requirements. To tackle the difficulty of the material selection with specific properties from a large number of alternatives, multi-criteria decision-making (MCDM) methods have been used. In this paper a decision model including extended PROMETHEE II (EXPROM2) (preference ranking organization method for enrichment evaluation), TOPSIS (technique for order performance by similarity to ideal solution) and VIKOR (VIšekriterijumsko KOmpromisno Rangiranje) methods were used for the selection of the best material for the tool holder used in hard milling. The criteria weighting was performed by compromised weighting method composed of AHP (analytic hierarchy process) and Entropy methods. The candidate materials were ranked by using these methods and the results obtained by each method were compared. It was confirmed

  7. Medical specialty selection criteria of Israeli medical students early in their clinical experience: subgroups.

    Science.gov (United States)

    Avidan, Alexander; Weissman, Charles; Elchalal, Uriel; Tandeter, Howard; Zisk-Rony, Rachel Yaffa

    2018-04-18

    Israeli medical school classes include a number of student subgroups. Therefore, interventions aimed at recruiting medical students to the various specialties should to be tailored to each subgroup. Questionnaires, distributed to 6 consecutive 5th-year classes of the Hebrew University - Hadassah School of Medicine, elicited information on criteria for choosing a career specialty, criteria for choosing a residency program and the importance of finding a specialty interesting and challenging when choosing a residency. Completed questionnaires were returned by 540 of 769 (70%) students. The decision processes for choosing a medical specialty and choosing a residency program were different. Family and colleagues had minimal influence on choosing a specialty, while family and their residential locality had much influence on choosing a residency, especially among women. Older age, marriage, and spousal influence were positively associated with choice of a specialty. Two-thirds of the students had completed military service, 20% were attending medical school prior to military service, 5% had completed national service and 9% had entered medical school without serving. Despite the pre-military subgroup being younger and having another 7 years of medical school, internship and military service before residency, they had begun thinking about which specialty to choose, just like the post-military students. When choosing a residency program, post-military women were more influenced by their families and family residential locality than their pre-military counterparts; differences ascribed to the older and often married post-military women having or wanting to begin families. This difference was reinforced by fewer post- than pre-military women willing to wait 2-3 years for a residency in the specialty that interested them most and were willing to begin residency immediately after internship in a specialty that interested them less. Medical school classes are composed of

  8. Prognostic Health Management System: Component Selection Based on Risk Criteria and Economic Benefit Assessment

    International Nuclear Information System (INIS)

    Pham, B.T.; Agarwal, V.; Lybeck, N.J.; Tawfik, M.S.

    2012-01-01

    Long-term operation (LTO), i.e., beyond 60 years, of the current fleet of nuclear power plants (NPPs) is an important element in the overall energy stability of the United States in coming decades. Problem Statement and Proposed Approach: - For LTO of NPPs, early and proactive diagnosis of degradation at systems, structures, and components (SSCs) level is required; - Periodic maintenance versus Proactive maintenance; - Prognostic Health Monitoring (PHM) can be used to better manage aging and degradation mechanisms, including emerging mechanisms; - Selection of components is crucial for implementing the PHM system; - Approach is to develop a quantitative framework that aids systematic identification of plant components that are selected for cost-effective PHM.

  9. Prognostic Health Monitoring System: Component Selection Based on Risk Criteria and Economic Benefit Assessment

    International Nuclear Information System (INIS)

    Pham, Binh T.; Agarwal, Vivek; Lybeck, Nancy J.; Tawfik, Magdy S.

    2012-01-01

    Prognostic health monitoring (PHM) is a proactive approach to monitor the ability of structures, systems, and components (SSCs) to withstand structural, thermal, and chemical loadings over the SSCs planned service lifespan. The current efforts to extend the operational license lifetime of the aging fleet of U.S. nuclear power plants from 40 to 60 years and beyond can benefit from a systematic application of PHM technology. Implementing a PHM system would strengthen the safety of nuclear power plants, reduce plant outage time, and reduce operation and maintenance costs. However, a nuclear power plant has thousands of SSCs, so implementing a PHM system that covers all SSCs requires careful planning and prioritization. This paper therefore focuses on a component selection that is based on the analysis of a component's failure probability, risk, and cost. Ultimately, the decision on component selection depends on the overall economical benefits arising from safety and operational considerations associated with implementing the PHM system. (author)

  10. New selection criteria for channel refueling of a Candu-6 reactor: introduction to floppy rules

    International Nuclear Information System (INIS)

    Brissette, D.

    2001-01-01

    A revised set of rules is in use at Gentilly-2 NGS for the selection of channels for refuelling. Traditional hard channel rejection rules (of go/no-go type) have been replaced by a more efficient set of soft evaluation rules based on concepts borrowed to the Fuzzy Logic. New evaluation rules, labelled as 'Floppy Rules', enable to assess and rate the channel suitability for refuelling by using a smooth and natural continuum of values qualifying excellent, good, fair and poor choices. Global channel suitability for refuelling is measured by combining separate ratings obtained from individual evaluation rules. Each evaluation rule is based on a specific control parameter related to local or lumped core properties. Two new software codes (NEWRULES and REFUEL) designed around the concept of Floppy Rules enable to perform a very efficient selection of optimized channel refuelling sequences either in manual and automatic mode. (author)

  11. Criteria for selecting electrodes for electrical stimulation: theoretical and practical considerations.

    Science.gov (United States)

    Brummer, S B; Robblee, L S; Hambrecht, F T

    1983-01-01

    Smaller, more charge-intensive electrodes are needed for "safe" stimulation of the nervous system. In this paper we review critical concepts and the state of the art in electrodes. Control of charge density and charge balance are essential to avoid tissue electrolysis. Chemical criteria for "safe" stimulation are reviewed ("safe" is equated with "chemically reversible"). An example of a safe, but generally impractical, charge-injection process is double-layer charging. The limit here is the onset of irreversible faradaic processes. More charge can be safely injected with so-called "capacitor" electrodes, such as porous intermixtures of Ta/Ta2O5. BaTiO3 has excellent dielectric properties and may provide a new generation of capacitor electrodes. Faradaic charge injection is usually partially irreversible since some of the products escape into the solution. With Pt, up to 400 muc/cm2 real area can be absorbed by faradaic reactions of surface-adsorbed species, but a small part is lost due to metal dissolution. The surface of "activated" Ir is covered with a multilayer hydrated oxide. Charge injection occurs via rapid valence change within this oxide. Little or no metal dissolution is observed, and gassing limits are not exceeded even under stringent conditions.

  12. Gender approaches to evolutionary multi-objective optimization using pre-selection of criteria

    Science.gov (United States)

    Kowalczuk, Zdzisław; Białaszewski, Tomasz

    2018-01-01

    A novel idea to perform evolutionary computations (ECs) for solving highly dimensional multi-objective optimization (MOO) problems is proposed. Following the general idea of evolution, it is proposed that information about gender is used to distinguish between various groups of objectives and identify the (aggregate) nature of optimality of individuals (solutions). This identification is drawn out of the fitness of individuals and applied during parental crossover in the processes of evolutionary multi-objective optimization (EMOO). The article introduces the principles of the genetic-gender approach (GGA) and virtual gender approach (VGA), which are not just evolutionary techniques, but constitute a completely new rule (philosophy) for use in solving MOO tasks. The proposed approaches are validated against principal representatives of the EMOO algorithms of the state of the art in solving benchmark problems in the light of recognized EC performance criteria. The research shows the superiority of the gender approach in terms of effectiveness, reliability, transparency, intelligibility and MOO problem simplification, resulting in the great usefulness and practicability of GGA and VGA. Moreover, an important feature of GGA and VGA is that they alleviate the 'curse' of dimensionality typical of many engineering designs.

  13. DISCRIMINATIVE MODEL OF CERTAIN MOTOR INDICATORS OF FOOTBALL PLAYERS AS SELECTION CRITERIA FOR TEAM POSITION

    Directory of Open Access Journals (Sweden)

    Goran Vučković

    2013-07-01

    Full Text Available Well-designed and implemented selection is one of the important prerequisites for achieving the expected results in the modern competitive sport at all levels. The aim of this work was to determine how the selection was made for Serbian League players, on the basis of their certain motor parameters and the positions in the team. A sample of 25 senior players of a football team competing in the Serbian League is divided into four sub-samples, based on team positions. For assessment of motor characteristics following tests were used: long jump (LJ, Abalac test (AT; 10 seconds push-ups (PU, 30 seconds trunk bends (TB, 20 meter flying start running (20FSR, 20 meter high start running (20HSR, 50 meter high start running (50HSR and Cooper test (CT . Based on the obtained results it can be concluded that there are significant differences for variable 20FSR and variable CT (F = 3754, 9835, p = .027, .000, respectively. Three canonical discriminant functions were singled out, where the first explained even 84.6%, the second 14.5% and the third only 1% of the total variance, or in summary first two functions explained 99.0% of the variance. It can be concluded that the selected players, in terms of the position in the team, distinguished first by performing on the Cooper test, followed by the result of 20 meter flying start running, 20 meter high start running, 50 meter high start running, trunk bends, and finally by Abalac test, push-ups and long jump. Observed as a function of certain motor characteristics, it could be concluded that in the selection of players in terms of the playing position confidence level was 72.0% in general level, with the most reliable for goalkeepers (100%, midfielders (71.4% and defensive players (70.0%, while the smallest was at strikers (50%.

  14. Autotransplant tissue selection criteria with or without stereomicroscopy in parathyroidectomy for treatment of renal hyperparathyroidism

    Directory of Open Access Journals (Sweden)

    Monique Nakayama Ohe

    2014-07-01

    Full Text Available INTRODUCTION: Several methods have been proposed to improve operative success in renal hyperparathyroidism. OBJECTIVE: To evaluate stereomicroscopy in parathyroid tissue selection for total parathyroidectomy with autotransplantation in secondary (SHPT/tertiary (THPT hyperparathyroidism. METHODS: 118 renal patients underwent surgery from April of 2000 to October 2009. They were divided into two groups: G1, 66 patients operated from April of 2000 to May of 2005, with tissue selection based on macroscopic observation; G2, 52 patients operated from March of 2008 to October 2009 with stereomicroscopy for tissue selection searching for the presence of adipose cells. All surgeries were performed by the same surgeon. Patients presented SHPT (dialysis treatment or THPT (renal-grafted. Follow-up was 12-36 months. Intra-operative parathyroid hormone (PTH was measured in 100/118 (84.7% patients. RESULTS: Data are presented as means. G1 included 66 patients (38 SHPT, 24 females/14 males; 40.0 years of age; 28 THPT, 14 females/14 males; 44 years of age. G2 included 52 patients (29 SHPT, 11 females/18 males; 50.7 years of age; 23 THPT, 13 females/10 males, 44.4 years of age. SHPT patients from G2 presented preoperative serum calcium higher than those of SHPT patients in G1 (p < 0.05, suggesting a more severe disease. Definitive hypoparathyroidism was found in seven of 118 patients (5.9%. Graft-dependent recurrence occurred in four patients, two in each group. All occurred in dialysis patients. CONCLUSION: Stereomicroscopy in SHPT/THPT surgical treatment may be a useful tool to standardize parathyroid tissue selection.

  15. Development of site selection criteria for radioactive waste disposal in view of favourable geological settings in Germany

    International Nuclear Information System (INIS)

    Baltes, B.; Brewitz, W.

    2001-01-01

    In Germany it is intended to dispose of all types of radioactive waste in deep geological formations. Since the government has doubts regarding the suitability of the Gorleben site, further sites in different host rock formations have to be investigated. This investigation process has to be carried out with respect to technical suitability and safety as well as to public acceptance. A Committee has been established whose mandate is to develop a comprehensible procedure for the selection of sites for radioactive waste disposal in Germany. The Committee developed an iterative procedure which provides, besides the increase of transparency, the necessary flexibility in dealing with assessment results. The method is governed by geo-scientific and social-scientific criteria that are presented in this paper. 7 steps have been identified in the procedure: 1) exclusion of areas with obviously unfavourable conditions, 2) identification of areas with favourable geological settings, 3) exclusion of areas for socio-scientific reasons, 4) identification of regions with favourable conditions and ranking of regions, 5) identification of sites for further identification, 6) above-ground site investigation and ranking of potentially suitable sites, and 7) identification of sites for suitability investigations. The first 3 steps give the remaining areas that meet the minimum requirements. The criteria of the first 3 steps are: extensive vertical movements, active disturbance zones, seismic activity and volcanic activity, as for the 4 last steps criteria are based on geo- and socio- scientific weighing, voluntariness and regional mediation. (A.C.)

  16. Development of site selection criteria for radioactive waste disposal in view of favourable geological settings in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Baltes, B.; Brewitz, W. [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Cologne (Germany)

    2001-07-01

    In Germany it is intended to dispose of all types of radioactive waste in deep geological formations. Since the government has doubts regarding the suitability of the Gorleben site, further sites in different host rock formations have to be investigated. This investigation process has to be carried out with respect to technical suitability and safety as well as to public acceptance. A Committee has been established whose mandate is to develop a comprehensible procedure for the selection of sites for radioactive waste disposal in Germany. The Committee developed an iterative procedure which provides, besides the increase of transparency, the necessary flexibility in dealing with assessment results. The method is governed by geo-scientific and social-scientific criteria that are presented in this paper. 7 steps have been identified in the procedure: 1) exclusion of areas with obviously unfavourable conditions, 2) identification of areas with favourable geological settings, 3) exclusion of areas for socio-scientific reasons, 4) identification of regions with favourable conditions and ranking of regions, 5) identification of sites for further identification, 6) above-ground site investigation and ranking of potentially suitable sites, and 7) identification of sites for suitability investigations. The first 3 steps give the remaining areas that meet the minimum requirements. The criteria of the first 3 steps are: extensive vertical movements, active disturbance zones, seismic activity and volcanic activity, as for the 4 last steps criteria are based on geo- and socio- scientific weighing, voluntariness and regional mediation. (A.C.)

  17. Selection of jets produced in 13TeV proton-proton collisions with the ATLAS detector

    CERN Document Server

    The ATLAS collaboration

    2015-01-01

    Quality criteria for the selection of reconstructed anti-$k_t$ jets with $R = 0.4$ in the ATLAS detector are described. The study is based on data recorded in June 2015 by the ATLAS experiment in $\\sqrt{s}$ = 13 TeV protonâproton collisions at the Large Hadron Collider, with a total integrated luminosity of 6.4 pb$^{−1}$. Two selection criteria are introduced. The Loose selection is designed to provide an efficiency of selecting jets from proton-proton collisions above 99.5% (99.9%) for $p_T>$ 20 (100) GeV to be used in most ATLAS physics analyses. A tighter set of selection cuts, called Tight, is designed to further reject background jets for analyses sensitive to non-collision backgrounds with an efficiency of selecting jets from proton-proton collisions above 95% (99.5%) for $p_T>$ 20 (100) GeV.

  18. Interval-valued intuitionistic fuzzy multi-criteria model for design concept selection

    Directory of Open Access Journals (Sweden)

    Daniel Osezua Aikhuele

    2017-09-01

    Full Text Available This paper presents a new approach for design concept selection by using an integrated Fuzzy Analytical Hierarchy Process (FAHP and an Interval-valued intuitionistic fuzzy modified TOP-SIS (IVIF-modified TOPSIS model. The integrated model which uses the improved score func-tion and a weighted normalized Euclidean distance method for the calculation of the separation measures of alternatives from the positive and negative intuitionistic ideal solutions provides a new approach for the computation of intuitionistic fuzzy ideal solutions. The results of the two approaches are integrated using a reflection defuzzification integration formula. To ensure the feasibility and the rationality of the integrated model, the method is successfully applied for eval-uating and selecting some design related problems including a real-life case study for the selec-tion of the best concept design for a new printed-circuit-board (PCB and for a hypothetical ex-ample. The model which provides a novel alternative, has been compared with similar computa-tional methods in the literature.

  19. Chronic alcohol exposure disrupts top-down control over basal ganglia action selection to produce habits.

    Science.gov (United States)

    Renteria, Rafael; Baltz, Emily T; Gremel, Christina M

    2018-01-15

    Addiction involves a predominance of habitual control mediated through action selection processes in dorsal striatum. Research has largely focused on neural mechanisms mediating a proposed progression from ventral to dorsal lateral striatal control in addiction. However, over reliance on habit striatal processes may also arise from reduced cortical input to striatum, thereby disrupting executive control over action selection. Here, we identify novel mechanisms through which chronic intermittent ethanol exposure and withdrawal (CIE) disrupts top-down control over goal-directed action selection processes to produce habits. We find CIE results in decreased excitability of orbital frontal cortex (OFC) excitatory circuits supporting goal-directed control, and, strikingly, selectively reduces OFC output to the direct output pathway in dorsal medial striatum. Increasing the activity of OFC circuits restores goal-directed control in CIE-exposed mice. Our findings show habitual control in alcohol dependence can arise through disrupted communication between top-down, goal-directed processes onto basal ganglia pathways controlling action selection.

  20. A GIS-BASED MULTI-CRITERIA EVALUATION SYSTEM FOR SELECTION OF LANDFILL SITES: a case study from Abu Dhabi, United Arab Emirates

    Directory of Open Access Journals (Sweden)

    S. M. Issa

    2012-07-01

    Full Text Available Landfill sites receive 92% of total annual solid waste produced by municipalities in the emirate of Abu Dhabi. In this study, candidate sites for an appropriate landfill location for the Abu Dhabi municipal area are determined by integrating geographic information systems (GIS and multi-criteria evaluation (MCE analysis. To identify appropriate landfill sites, eight input map layers including proximity to urban areas, proximity to wells and water table depth, geology and topography, proximity to touristic and archeological sites, distance from roads network, distance from drainage networks, and land slope are used in constraint mapping. A final map was generated which identified potential areas showing suitability for the location of the landfill site. Results revealed that 30% of the study area was identified as highly suitable, 25% as suitable, and 45% as unsuitable. The selection of the final landfill site, however, requires further field research.

  1. Nuclear safety criteria applied in site selection - the practice in France

    International Nuclear Information System (INIS)

    Candes, P.; Aussourd, Ph.

    1975-01-01

    In France, the safety of nuclear facilities is the responsibility of the Ministry for Industry and Research (Central Department for the Safety of Nuclear Facilities). The first part of the paper deals with the conception and contents of the site studies which are included in a safety report with the object of obtaining authorization to go ahead with work on the establishment of a facility. The conception is governed by the following two considerations: (a) the site is a place where the natural elements and living organisms occur and which is characterized by the permanent presence of the human factor, while the proposed nuclear facility will - like any industrial facility - present risks and have an impact on the site, particularly through the discharge of radioactive effluent and potentially in consequence of a nuclear accident; (b) the site exercises an influence - in fact, it even imposes constraints - on the nuclear facility. The site study as submitted by the operators to the authorities responsible for the safety evaluation traditionally consists of six sections, covering: (I) description and history of the site; (II) meteorological conditions; (III) hydrology of the area; (IV) geological and seismological conditions; (V) ecological factors; (VI) natural and/or previous radioactivity at the site. These six sections contain the data which serve as a basis for applying the two considerations spelled out above. However, the two corresponding directions of study and analysis do not settle the fundamental problem of the distribution of the population around the site. Methods for dealing with this problem are suggested in the second part of the paper; they take into account the efforts made so far at the international level. The authors consider that limiting criteria should not be based solely on the radioactive effluent discharges associated with normal operation but on the radioactivity releases associated with accidents. The methods proposed by them constitute

  2. Validation of KDRI/KDPI for the selection of expanded criteria kidney donors

    Directory of Open Access Journals (Sweden)

    Raimundo M. García del Moral Martín

    2018-05-01

    Full Text Available Introduction: KDRI/KDPI are tools use in kidney donor evaluation. It has been proposed as a substitute of, or complementary to preimplantation renal biopsy. These scores have not been validated in Spain. Objective: (1 To investigate the concordance between KDPI and histological scores (preimplantation renal biopsy and (2 to assess the relationship between KDRI, KDPI and histological score on graft survival in the expanded criteria donors group. Methodology: Retrospective cohort study from 1 January 1998 to 31 December 2010. Results: During the study 120 donors were recruited, that resulted in 220 preimplantation renal biopsies. 144 (65% grafts were considered suitable for kidney transplantation. 76 (34.5% were discarded. Median follow up has been 6.4 years (sd 3.9. Median age 63.1 years (sd 8.2, males (145; 65.9%, non-diabetic (191; 86.8% and without another cardiovascular risk factors (173; 78.6%. 153 (69.5% donors died of cerebrovascular disease. There were significant differences in KDRI/KDPI score in both groups 1.56/89 (sd 0.22 vs 1.66/93 (sd 0.15, p < 0.01. The KDPI showed moderate concordance and correlation with the histological score (AUC 0.64/correlation coefficient 0.24, p < 0.01. KDPI (HR 24.3, p < 0.01 and KDRI (HR 23.3, p < 0.01 scores were associated with graft survival in multivariate analysis. Conclusion: (1 KPDI and histological scores show moderate concordance. The utility of both scores as combined tools it has to be determined. (2 KDPI score, and especially KDRI score, are valid for estimating graft survival and combined with the biopsy can help to individualized decision making in the expanded criteria donors pool. Resumen: Introducción: El KDRI y su variante KDPI son dos herramientas utilizadas para la valoración del donante renal. Se ha propuesto la utilidad del KDPI como sustituto/complementario a la biopsia renal preimplantación. Estos scores no están validados en España. Objetivo: 1 Investigar la

  3. A hybrid multi-criteria decision modeling approach for the best biodiesel blend selection based on ANP-TOPSIS analysis

    Directory of Open Access Journals (Sweden)

    G. Sakthivel

    2015-03-01

    Full Text Available The ever increasing demand and depletion of fossil fuels had an adverse impact on environmental pollution. The selection of appropriate source of biodiesel and proper blending of biodiesel plays a major role in alternate energy production. This paper describes an application of hybrid Multi Criteria Decision Making (MCDM technique for the selection of optimum fuel blend in fish oil biodiesel for the IC engine. The proposed model, Analytical Network Process (ANP is integrated with Technique for Order Performance by Similarity to Ideal Solution (TOPSIS and VlseKriterijumska Optimizacija I Kompromisno Resenje (in Serbian (VIKOR to evaluate the optimum blend. Evaluation of suitable blend is based on the exploratory analysis of the performance, emission and combustion parameters of the single cylinder, constant speed direct injection diesel engine at different load conditions. Here the ANP is used to determine the relative weights of the criteria, whereas TOPSIS and VIKOR are used for obtaining the final ranking of alternative blends. An efficient pair-wise comparison process and ranking of alternatives can be achieved for optimum blend selection through the integration of ANP with TOPSIS and VIKOR. The obtained preference order of the blends for ANP-VIKOR and ANP-TOPSIS are B20 > Diesel > B40 > B60 > B80 > B100 and B20 > B40 > Diesel > B60 > B80 > B100 respectively. Hence by comparing both these methods, B20 is selected as the best blend to operate the internal combustion engines. This paper highlights a new insight into MCDM techniques to evaluate the best fuel blend for the decision makers such as engine manufactures and R& D engineers to meet the fuel economy and emission norms to empower the green revolution.

  4. An Evaluation of the Air Force Institute of Technology Student Selection Criteria

    Science.gov (United States)

    1989-09-01

    total score on the GMAT TOEFL Student’s score on the Test of English as a Foreign Language • denotes an indicator variable 2( Criterion Variable The...students, scores on the TOEFL . Any other possible predictors were not chosen because they are not used in the student selection process and therefore would...GMATQ 722 32.66 6.46 11.00 54.00 GMATT 731 537.07 68.84 275.00 740.00 TOEFL 59 521.46 128.87 80.00 780.00 * Effective October 1,1981, the maximimum

  5. Demands and criteria for the site selection from the view of the power plant owners

    International Nuclear Information System (INIS)

    Beising, R.; Staebler, K.

    1976-01-01

    The methods as shown by the concrete example of the site provision plan for Baden-Wuerttemberg have proved extremely useful. The pragmatic method of site selection which ensures as little clash of interests as possible between the power plant and other preservation interests such as e.g. environment preservation, recreation areas, development axes, water economics is the only possible method for the densely populated areas of the Federal Republic. The numerous physical constraints in our Land only allow an optimisation of site search within the limited possibilities. (HP) [de

  6. Multi-criteria decision-making in the selection of a renewable energy project in spain: The Vikor method

    International Nuclear Information System (INIS)

    San Cristobal, J.R.

    2011-01-01

    One of the characteristics of the Spanish energy system is its high degree of dependence on imports. In 2005, the Spanish government approved the new Renewable Energy Plan in the following sectors: Windpower, Hydroelectric, Solar Thermal, Solar Thermo-electric, Photovoltaic, Biomass, Biogas and Biofuels. The aim of the Plan is to make it possible to reach the target of 12% of primary energy being met from renewable sources by 2010. When selecting one from various Renewable Energy investment projects different groups of decision-makers become involved in the process. Decision-making has to take into consideration several conflicting objectives because of the increasingly complex social, economic, technological, and environmental factors that are present. Traditional single-criterion decision-making is no longer able to handle these problems. The Compromise Ranking method, also known as the VIKOR method, introduces the Multi-criteria ranking index based on the particular measure of ''closeness'' to the ''ideal'' solution. In this paper, we apply the method in the selection of a Renewable Energy project corresponding to the Renewable Energy Plan launched by the Spanish Government. The method is combined with the Analytical Hierarchy Process method for weighting the importance of the different criteria, which allows decision-makers to assign these values based on their preferences. The results show that the Biomass plant option (Co-combustion in a conventional power plant) is the best choice, followed by the Wind power and Solar Thermo-electric alternatives. (author)

  7. Selection of adequate site location during early stages of construction project management: A multi-criteria decision analysis approach

    Science.gov (United States)

    Marović, Ivan; Hanak, Tomaš

    2017-10-01

    In the management of construction projects special attention should be given to the planning as the most important phase of decision-making process. Quality decision-making based on adequate and comprehensive collaboration of all involved stakeholders is crucial in project’s early stages. Fundamental reasons for existence of this problem arise from: specific conditions of construction industry (final products are inseparable from the location i.e. location has a strong influence of building design and its structural characteristics as well as technology which will be used during construction), investors’ desires and attitudes, and influence of socioeconomic and environment aspects. Considering all mentioned reasons one can conclude that selection of adequate construction site location for future investment is complex, low structured and multi-criteria problem. To take into account all the dimensions, the proposed model for selection of adequate site location is devised. The model is based on AHP (for designing the decision-making hierarchy) and PROMETHEE (for pairwise comparison of investment locations) methods. As a result of mixing basis feature of both methods, operational synergies can be achieved in multi-criteria decision analysis. Such gives the decision-maker a sense of assurance, knowing that if the procedure proposed by the presented model has been followed, it will lead to a rational decision, carefully and systematically thought out.

  8. Comparison of imaging selection criteria for intra-arterial thrombectomy in acute ischemic stroke with advanced CT

    International Nuclear Information System (INIS)

    Kim, Eung Yeop; Goh, Byeong Ho; Shin, Dong Hoon; Noh, Young; Lee, Yeong-Bae

    2016-01-01

    To compare two selection criteria (noncontrast CT [NCCT] with multi-phase CT Angiography [MPCTA] and CT perfusion [CTP]) for the determination of eligibility for thrombectomy. We retrospectively enrolled 71 patients who underwent head NCCT, 9.6-cm CTP, and craniocervical single-phase CTA (SPCTA) within 6 hours of onset. The simulated MPCTA was reconstructed from 1-mm CTP images for assessment of collateral circulation. Infarct core (relative CBF < 30 %) and penumbra (Tmax > 6 seconds) volumes were measured. The infarct core < 70 mL with a mismatch ratio > 1.2 (CTP-A), infarct core ≤ 40 mL with a mismatch ratio > 1.8 (CTP-B), and ASPECTS > 5 with good collaterals (50 % ≥ MCA territory) were used to determine eligibility for thrombectomy. SPCTA was compared with the simulated MPCTA for assessment of collaterals. CTP-B determined that 11 patients were ineligible for thrombectomy, of which three were eligible by NCCT with MPCTA and 6 by CTP-A. CTP-A and CTP-B showed discrepancy in determining eligibility for thrombectomy between NCCT with MPCTA in three patients each, rendering no significant statistical difference (P > 0.05). The number of patients with poor collaterals was significantly higher on SPCTA than MPCTA (n = 22 and 6 respectively; P < 0.0001). The two imaging selection criteria (NCCT with MPCTA and CTP) were statistically comparable for determining eligibility for thrombectomy. (orig.)

  9. Relationship between student selection criteria and learner success for medical dosimetry students.

    Science.gov (United States)

    Baker, Jamie; Tucker, Debra; Raynes, Edilberto; Aitken, Florence; Allen, Pamela

    2016-01-01

    Medical dosimetry education occupies a specialized branch of allied health higher education. Noted international shortages of health care workers, reduced university funding, limitations on faculty staffing, trends in learner attrition, and increased enrollment of nontraditional students force medical dosimetry educational leadership to reevaluate current admission practices. Program officials wish to select medical dosimetry students with the best chances of successful graduation. The purpose of the quantitative ex post facto correlation study was to investigate the relationship between applicant characteristics (cumulative undergraduate grade point average (GPA), science grade point average (SGPA), prior experience as a radiation therapist, and previous academic degrees) and the successful completion of a medical dosimetry program, as measured by graduation. A key finding from the quantitative study was the statistically significant positive correlation between a student׳s previous degree and his or her successful graduation from the medical dosimetry program. Future research investigations could include a larger research sample, representative of more medical dosimetry student populations, and additional studies concerning the relationship of previous work as a radiation therapist and the effect on success as a medical dosimetry student. Based on the quantitative correlation analysis, medical dosimetry leadership on admissions committees could revise student selection rubrics to place less emphasis on an applicant׳s undergraduate cumulative GPA and increase the weight assigned to previous degrees. Copyright © 2016 American Association of Medical Dosimetrists. Published by Elsevier Inc. All rights reserved.

  10. Relationship between student selection criteria and learner success for medical dosimetry students

    International Nuclear Information System (INIS)

    Baker, Jamie; Tucker, Debra; Raynes, Edilberto; Aitken, Florence; Allen, Pamela

    2016-01-01

    Medical dosimetry education occupies a specialized branch of allied health higher education. Noted international shortages of health care workers, reduced university funding, limitations on faculty staffing, trends in learner attrition, and increased enrollment of nontraditional students force medical dosimetry educational leadership to reevaluate current admission practices. Program officials wish to select medical dosimetry students with the best chances of successful graduation. The purpose of the quantitative ex post facto correlation study was to investigate the relationship between applicant characteristics (cumulative undergraduate grade point average (GPA), science grade point average (SGPA), prior experience as a radiation therapist, and previous academic degrees) and the successful completion of a medical dosimetry program, as measured by graduation. A key finding from the quantitative study was the statistically significant positive correlation between a student's previous degree and his or her successful graduation from the medical dosimetry program. Future research investigations could include a larger research sample, representative of more medical dosimetry student populations, and additional studies concerning the relationship of previous work as a radiation therapist and the effect on success as a medical dosimetry student. Based on the quantitative correlation analysis, medical dosimetry leadership on admissions committees could revise student selection rubrics to place less emphasis on an applicant's undergraduate cumulative GPA and increase the weight assigned to previous degrees.

  11. Selection criteria for a radioactive waste disposal site in the Republic of South Africa

    International Nuclear Information System (INIS)

    Toens, P.D.; Hambleton-Jones, B.B.

    1986-01-01

    A program commenced in 1978 to select a suitable site for the disposal of nuclear waste in South Africa. This entailed the examination of a variety of socio-economic and earthscience related parameters over large parts of South Africa. The site selection program, for which the Geology Department of the Atomic Energy Corporation of South Africa Ltd (AEC) (previously the Nuclear Development Corporation (NUCOR)) accepted responsibility, commenced with an initial screening phase and led to the identification of potentially suitable areas by mid 1980. A site suitability phase involving regional, and subsequently detailed socio-economic, geological, geohydrological and geophysical studies in the areas identified by the screening phase was completed in December 1982. As a result of very positive indications that the district of Namaqualand was the most suitable candidate area it was possible, after further detailed investigations, to identify and purchase a site judged to be suitable for the disposal of low- and intermediate-level waste by February 1983. The area acquired measures some 10 000ha in extent and is situated 100km southeast of Springbok in the northwestern Cape and 600km north of the Koeberg nuclear power station near Cape Town

  12. Relationship between student selection criteria and learner success for medical dosimetry students

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Jamie, E-mail: jabaker@mdanderson.org [Medical Dosimetry Program, School of Health Professions, The University of Texas MD Anderson Cancer Center School of Health Professions, Houston, TX (United States); Tucker, Debra [Arizona State University, Phoenix, AZ (United States); Raynes, Edilberto [University of Phoenix, Phoenix, AZ (United States); Aitken, Florence [University of Nevada, Las Vegas, NV (United States); Allen, Pamela [Department of Radiation Oncology, The University of Texas MD Anderson Cancer Center, Houston, TX (United States)

    2016-04-01

    Medical dosimetry education occupies a specialized branch of allied health higher education. Noted international shortages of health care workers, reduced university funding, limitations on faculty staffing, trends in learner attrition, and increased enrollment of nontraditional students force medical dosimetry educational leadership to reevaluate current admission practices. Program officials wish to select medical dosimetry students with the best chances of successful graduation. The purpose of the quantitative ex post facto correlation study was to investigate the relationship between applicant characteristics (cumulative undergraduate grade point average (GPA), science grade point average (SGPA), prior experience as a radiation therapist, and previous academic degrees) and the successful completion of a medical dosimetry program, as measured by graduation. A key finding from the quantitative study was the statistically significant positive correlation between a student's previous degree and his or her successful graduation from the medical dosimetry program. Future research investigations could include a larger research sample, representative of more medical dosimetry student populations, and additional studies concerning the relationship of previous work as a radiation therapist and the effect on success as a medical dosimetry student. Based on the quantitative correlation analysis, medical dosimetry leadership on admissions committees could revise student selection rubrics to place less emphasis on an applicant's undergraduate cumulative GPA and increase the weight assigned to previous degrees.

  13. INDICATORS OF MAXIMAL FLEXOR FORCE OF LEFT AND RIGHT HAND FOR THE POLICE SELECTION CRITERIA PURPOSES

    Directory of Open Access Journals (Sweden)

    Milivoj Dopsaj

    2006-06-01

    Full Text Available As a part of their professional responsibilities, police officers have authorization, in situation determined by law, to apply physical force or means of force. Due to given professional reasons, selection among the candidates as well as routine physical capability assessments, should have professional-methodological basis and scientific foundation. Muscle groups of particular reference in relationship to estimate general contraction characteristic in regard to force, and at the same time very easy to test are flexor muscles of fingers of the hand (test “hand squeeze”. The aim of this research is to define criterion characteristic for the population to function for selection and estimation of the hand squeeze force among policemen. This research had 723 participants, students of the Police Academy, as representatives of policemen between 19 and 24 years of age. In order to estimate force of hand grip (both right and left hand, we utilized tensiometric method, and standard procedure previously described (1. For the statistical analysis we used basic descriptive analysis, cluster analysis (defining 7 characteristic classes (clusters as a function of population tested –unacceptable, poor, below average, averaged, above average, excellent and superior, and factor analysis (definition of the selection test as a function of selection procedure (10. Our results indicate that averaged hand grip force among the tested population is 61.70±8.97 DaN (Min – Max=43.43-101.41 for left hand, and 65.11±9.34 DaN (Min – Max= 46.54-109.75 for right hand. The values for the force of defined cluster centers of left hand are: Cluster1-7=50.22, 55.76, 61.61, 67.84, 74.71, 84.02 and 97.15 DaN, and right hand are: Cluster1-7=53.40, 60.27, 66.10, 72.20, 79.70, 92.55 and 105.65 DaNFactor analysis results have shown that one factor has been isolated that accounted for 91.10 worthy variance. Regarding the individual variability, for the saturation of the isolated

  14. Selection of yeast able to produce ethanol from glucose at 40/sup 0/C

    Energy Technology Data Exchange (ETDEWEB)

    Hacking, A J; Taylor, I W.F.; Hanas, C M

    1984-05-01

    A total of 55 yeast strains selected from 7 genera known to ferment carbohydrates to ethanol were screened for their ability to ferment glucose to ethanol in shaken flask culture at 37/sup 0/, 40/sup 0/ and 45/sup 0/C. Yields of more than 50% of the theoretical maximum were obtained with 28 strains at 37/sup 0/C, but only 12 at 40/sup 0/C. Only 6 could grow at 45/sup 0/C, but they produced poor yields. In general Kluyveromyces strains were more thermotolerant than Saccharomyces and Candida strains, but Saccharomyces strains produced higher ethanol yields. The 8 strains with the highest yields at 40/sup 0/C were evaluated in batch fermentations. Three of these, two Saccharomyces and one Candida, were able to meet minimum commercial targets set at 8% (v/v) ethanol from 14% (w/v) glucose at 40/sup 0/C.

  15. Selected wild strains of Agaricus bisporus produce high yields of mushrooms at 25°C.

    Science.gov (United States)

    Navarro, Pilar; Savoie, Jean-Michel

    2015-01-01

    To cultivate the button mushroom Agaricus bisporus in warm countries or during summer in temperate countries, while saving energy, is a challenge that could be addressed by using the biological diversity of the species. The objective was to evaluate the yield potential of eight wild strains previously selected in small scale experiments for their ability to produce mature fruiting bodies at 25°C and above. Culture units of 8 kg of compost were used. The yield expressed as weight or number per surface unit and earliness of fruiting were recorded during cultivation in climatic rooms at 17, 25 or 30°C. Only strains of A. bisporus var. burnettii were able to fruit at 30°C. At 25°C they produced the highest yields (27 kg m(-2)) and had best earliness. The yields at 25°C for the strains of A. bisporus var. bisporus ranged from 12 to 16 kg m(-2). The yield ratios 25°C/17°C ranged from 0.8 to 1.2. The variety burnettii originated in the Sonoran Desert in California showed adaptation for quickly producing fruiting bodies at high temperature when humidity conditions were favorable. Strains of the variety bisporus showed interesting potentials for their ability to produce mature fruiting bodies at higher temperature than present cultivars and might be used in breeding programs. Copyright © 2012 Revista Iberoamericana de Micología. Published by Elsevier Espana. All rights reserved.

  16. Comparison between different selection criteria in the genetic evaluation of Valle del Belice sheep

    Directory of Open Access Journals (Sweden)

    F. Firpo

    2011-03-01

    Full Text Available Lactation length in dairy sheep affects milk yield like other genetic and environmental factors. The length of the production period is affected by management decisions such as culling, mating and particularly ranking of animals with different parity and lambing in different months or seasons. Moreover the low heritability of lactation length (Barillet and Boichard, 1987; Dahlin et al., 1998 does not allow its use as a selection criterion. For this reason to achieve a good reliability in phenotypic and genetic evaluation of dairy species, production variability caused by systematic environmental effects must be removed. This is of particular interest for dairy sheep and goats reared in Sicily, where the typical production system is based on pasture, and related food availability is strongly affected by seasonal and annual climatic variations, which results in considerable variations in daily yields........

  17. Superior creep strength of a nickel-based superalloy produced by selective laser melting

    Energy Technology Data Exchange (ETDEWEB)

    Pröbstle, M., E-mail: martin.proebstle@fau.de [Department of Materials Science & Engineering Institute I, Friedrich-Alexander-Universität Erlangen-Nürnberg, Martensstraße 5, D-91058 Erlangen (Germany); Neumeier, S.; Hopfenmüller, J.; Freund, L.P. [Department of Materials Science & Engineering Institute I, Friedrich-Alexander-Universität Erlangen-Nürnberg, Martensstraße 5, D-91058 Erlangen (Germany); Niendorf, T. [Institut für Werkstofftechnik (Materials Engineering), Universität Kassel, Mönchebergstr. 3, D-34125 Kassel (Germany); Schwarze, D. [SLM Solutions GmbH, Roggenhorster Straße 9c, D-23556 Lübeck (Germany); Göken, M. [Department of Materials Science & Engineering Institute I, Friedrich-Alexander-Universität Erlangen-Nürnberg, Martensstraße 5, D-91058 Erlangen (Germany)

    2016-09-30

    The creep properties of a polycrystalline nickel-based superalloy produced via selective laser melting were investigated in this study. All heat treatment conditions of the additively manufactured material show superior creep strength compared to conventional cast and wrought material. The process leads to a microstructure with fine subgrains. In comparison to conventional wrought material no Niobium rich δ phase is necessary to control the grain size and thus more Niobium is available for precipitation hardening and solid solution strengthening resulting in improved creep strength.

  18. Photoabalation in dental hard substances and atheromatous plaques - The efficiency and selectivity criteria for surgery

    International Nuclear Information System (INIS)

    Jean, B.

    1995-01-01

    The basic principals of IR photoabalation are relatively easy to understand as long as water is the predominant absorber in the target tissue (e.g. brain tissue, cornea). Dental hard substances are typical target materials for the study of biological materials with low water content (30%) Its main constituent is hydroxyapatit (50%) with maximal absorption at 9.5 μm wavelength. The photoablation efficiency, the collateral thermal damage and the resultant formation of thermally induced surface cracks were investigated. Unlike the 2.95 μm of the Er:YAG, already in use, the 9.5 μm radiation minimizes the penetration depth; as a consequence, the volume of heated material per pulse is minimal too and thus thermal cracks - a potential source of caries are avoided. Furthermore at 9.5 μm, the ablation threshold requires a minimal fluence; this is an element of selectivity, limiting photoablation to dentin and enamel, while neighboring gingiva cannot be ablated accidentally. Removal of atherosclerotic plaques for recanalization of obliterated cardiac vessels (laser angioplasty) is a minimally invasive surgical procedure of highest socioeconomic relevance. The rather inhomogeneous composition of apatit and colesterol (both absorbing at 9.5 μm) make plaques a particularly complex target material; while the ablation efficiency has to be high, the related shock wave should be minimal. The open-quote selectivity close-quote criterion of the ablation process must avoid accidental perforation of the underlying vessel walls (composed of connective tissue with high water content), a deadly complication exclamation point Experimental results with FELIX will be demonstrated. Photoacoustic spectroscopy in a recently developed non contact mode has been proved to provide various informations (on line) about the IR-photoablation process

  19. [Influence of distinct criteria for selecting patients for swabbing on estimation of the effectiveness of the influenza vaccine].

    Science.gov (United States)

    Martínez-Baz, Iván; Guevara, Marcela; Elía, Fernando; Ezpeleta, Carmen; Fernández Alonso, Mirian; Castilla, Jesús

    2014-01-01

    To estimate the effectiveness of the influenza vaccine under different criteria for selecting patients for swabbing. A case-control study was performed of laboratory-confirmed cases (n=909) and negative controls for influenza (n=732) in the 2010-2011 to 2012-2013 seasons in Navarre (Spain). The adjusted vaccine effectiveness was estimated by including all swabs from patients with influenza-like-illness and selecting only the first two cases per physician and week. The first two patients per physician and week were less frequently vaccinated against influenza (7.9% vs. 12.5%, p=0.021) and less often received confirmation of influenza (53.6% vs. 66.4%, p <0.001) than subsequent patients. These differences decreased after adjustment for covariates. The effectiveness of the influenza vaccine was 49% (95% CI: 23-66%) when all swabs were included and was 55% (95% CI: 27-72%) when we selected the first two swabs per week and physician. The selection of the first two patients per physician and week may bias assessment of the effectiveness of the influenza vaccine, although this bias was small in the seasons analyzed. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

  20. Criteria for the selection of graphites for HTR integral block fuel elements

    International Nuclear Information System (INIS)

    Knowles, A.N.

    1980-01-01

    This paper is concerned with the special requirements for integral block fuel elements of the type first used in the Fort St. Vrain reactor. The main idea of these elements is that the carrier block and separate graphite clad fuel pins are combined into a single monolith. This combination leads to lower fabrication costs and some improvement in the thermal performance (lower temperature difference between fuel and the surface of heat transfer into the coolant). The advent of block fuel for HTRs of the Fort St. Vrain type has placed a fresh emphasis on the selection of graphite for block manufacture in respect of physical properties. This is because the temperature distributions typical of such fuelled blocks lead to shutdown stresses close to the maximum the graphite can sustain without damage. Figures presented in this paper suggest that the physical properties of the graphite can play a relatively large part in reducing such stress levels and that guidance on the key requirements for suitable specifications is therefore particularly needed by the manufacturers of fuel block graphites. While graphites for fuel blocks have this special need for combinations of physical properties which lead to low thermal and shrinkage stresses, the other characteristics must also receive attention. A low graphite cost combined with good homogeneity in the brick, so that waste minimized, are still necessary, while isotropy is also very important

  1. New Criteria of Indication and Selection of Patients to Cochlear Implant

    Directory of Open Access Journals (Sweden)

    André L. L. Sampaio

    2011-01-01

    Full Text Available Numerous changes continue to occur in cochlear implant candidacy. In general, these have been accompanied by concomitant and satisfactory changes in surgical techniques. Together, this has advanced the utility and safety of cochlear implantation. Most devices are now approved for use in patients with severe to profound unilateral hearing loss rather then the prior requirement of a bilateral profound loss. Furthermore, studies have begun utilizing short electrode arrays for shallow insertion in patients with considerable low-frequency residual hearing. This technique will allow the recipient to continue to use acoustically amplified hearing for the low frequencies simultaneously with a cochlear implant for the high frequencies. The advances in design of, and indications for, cochlear implants have been matched by improvements in surgical techniques and decrease in complications. The resulting improvements in safety and efficacy have further encouraged the use of these devices. This paper will review the new concepts in the candidacy of cochlear implant. Medline data base was used to search articles dealing with the following topics: cochlear implant in younger children, cochlear implant and hearing preservation, cochlear implant for unilateral deafness and tinnitus, genetic hearing loss and cochlear implant, bilateral cochlear implant, neuropathy and cochlear implant and neural plasticity, and the selection of patients for cochlear implant.

  2. Selection Criteria and Methods for Testing Different Surface Materials for Contact Frying Processes

    DEFF Research Database (Denmark)

    Ashokkumar, Saranya

    Inner surfaces of industrial process equipment for food are often coated to give the surfaces particular properties with respect to adhesion and cleanability. Existing coating materials (PTFE (Teflon®) or silicone based polymers) suffer from drawbacks when used in contact frying, because these co...... surface materials for contact frying processes. The surfaces selected for this purpose cover a wide spectrum of materials that range from hydrophobic to hydrophilic materials. The different surface materials investigated include stainless steel (reference), aluminium (Al Mg 5754), PTFE......, an experimental rig has been constructed which enabled a controlled fouling of different coatings on steel and aluminium substrates under realistic frying conditions. A subjective rating procedure was employed for screening different surfaces according to their non-stick properties when used for frying of a model...... defects and surface roughness play a significant role. The wear resistance of the coatings was tested by performing abrasive wear experiments. The ceramic coatings: TiAlN and ZrN were found to show the best wear resistance properties. The experiments also revealed the poor wear resistance of stainless...

  3. Cost-driven materials selection criteria for redox flow battery electrolytes

    Science.gov (United States)

    Dmello, Rylan; Milshtein, Jarrod D.; Brushett, Fikile R.; Smith, Kyle C.

    2016-10-01

    Redox flow batteries show promise for grid-scale energy storage applications but are presently too expensive for widespread adoption. Electrolyte material costs constitute a sizeable fraction of the redox flow battery price. As such, this work develops a techno-economic model for redox flow batteries that accounts for redox-active material, salt, and solvent contributions to the electrolyte cost. Benchmark values for electrolyte constituent costs guide identification of design constraints. Nonaqueous battery design is sensitive to all electrolyte component costs, cell voltage, and area-specific resistance. Design challenges for nonaqueous batteries include minimizing salt content and dropping redox-active species concentration requirements. Aqueous battery design is sensitive to only redox-active material cost and cell voltage, due to low area-specific resistance and supporting electrolyte costs. Increasing cell voltage and decreasing redox-active material cost present major materials selection challenges for aqueous batteries. This work minimizes cost-constraining variables by mapping the battery design space with the techno-economic model, through which we highlight pathways towards low price and moderate concentration. Furthermore, the techno-economic model calculates quantitative iterations of battery designs to achieve the Department of Energy battery price target of 100 per kWh and highlights cost cutting strategies to drive battery prices down further.

  4. Selection of antifungal protein-producing molds from dry-cured meat products.

    Science.gov (United States)

    Acosta, Raquel; Rodríguez-Martín, Andrea; Martín, Alberto; Núñez, Félix; Asensio, Miguel A

    2009-09-30

    To control unwanted molds in dry-cured meats it is necessary to allow the fungal development essential for the desired characteristics of the final product. Molds producing antifungal proteins could be useful to prevent hazards due to the growth of mycotoxigenic molds. The objective has been to select Penicillium spp. that produce antifungal proteins against toxigenic molds. To obtain strains adapted to these products, molds were isolated from dry-cured ham. A first screening with 281 isolates by the radial inhibition assay revealed that 166 were active against some of the toxigenic P. echinulatum, P. commune, and Aspergillusniger used as reference molds. The activity of different extracts from cultured medium was evaluated by a microspectroscopic assay. Molds producing active chloroform extracts were eliminated from further consideration. A total of 16 Penicillium isolates were screened for antifungal activity from both cell-free media and the aqueous residues obtained after chloroform extraction. The cell-free media of 10 isolates that produced a strong inhibition of the three reference molds were fractionated by FPLC on a cationic column. For protein purification, the fractions of the three molds that showed high inhibitory activity were further chromatographed on a gel filtration column, and the subfractions containing the highest absorbance peaks were assayed against the most sensitive reference molds. One subfraction each from strains AS51D and RP42C from Penicilliumchrysogenum confirmed the inhibitory activity against the reference molds. SDS-PAGE revealed a single band from each subfraction, with estimated molecular masses of 37kDa for AS51D and 9kDa for RP42C. Although further characterisation is required, both these proteins and the producing strains can be of interest to control unwanted molds on foods.

  5. Optimal Site Characterization and Selection Criteria for Oyster Restoration using Multicolinear Factorial Water Quality Approach

    Science.gov (United States)

    Yoon, J.

    2015-12-01

    Elevated levels of nutrient loadings have enriched the Chesapeake Bay estuaries and coastal waters via point and nonpoint sources and the atmosphere. Restoring oyster beds is considered a Best Management Practice (BMP) to improve the water quality as well as provide physical aquatic habitat and a healthier estuarine system. Efforts include declaring sanctuaries for brood-stocks, supplementing hard substrate on the bottom and aiding natural populations with the addition of hatchery-reared and disease-resistant stocks. An economic assessment suggests that restoring the ecological functions will improve water quality, stabilize shorelines, and establish a habitat for breeding grounds that outweighs the value of harvestable oyster production. Parametric factorial models were developed to investigate multicolinearities among in situ water quality and oyster restoration activities to evaluate posterior success rates upon multiple substrates, and physical, chemical, hydrological and biological site characteristics to systematically identify significant factors. Findings were then further utilized to identify the optimal sites for successful oyster restoration augmentable with Total Maximum Daily Loads (TMDLs) and BMPs. Factorial models evaluate the relationship among the dependent variable, oyster biomass, and treatments of temperature, salinity, total suspended solids, E. coli/Enterococci counts, depth, dissolved oxygen, chlorophyll a, nitrogen and phosphorus, and blocks consist of alternative substrates (oyster shells versus riprap, granite, cement, cinder blocks, limestone marl or combinations). Factorial model results were then compared to identify which combination of variables produces the highest posterior biomass of oysters. Developed Factorial model can facilitate maximizing the likelihood of successful oyster reef restoration in an effort to establish a healthier ecosystem and to improve overall estuarine water quality in the Chesapeake Bay estuaries.

  6. Geological criteria for site selection of an LILW radioactive waste repository in the Philippines

    International Nuclear Information System (INIS)

    Aurelio, Mario; Taguibao, Kristine Joy; Vargas, Edmundo; Palattao, Maria Visitacion; Reyes, Rolando; Nohay, Carl; Singayan, Alfonso

    2013-01-01

    In the selection of sites for disposal facilities involving low- and intermediate-level radioactive waste (LILW), International Atomic Energy Agency (IAEA) recommendations require that 'the region in which the site is located shall be such that significant tectonic and surface processes are not expected to occur with an intensity that would compromise the required isolation capability of the repository'. Evaluating the appropriateness of a site therefore requires a deep understanding of the geological and tectonic setting of the area. The Philippines sits in a tectonically active region frequented by earthquakes and volcanic activity. Its highly variable morphology coupled with its location along the typhoon corridor in the west Pacific region subjects the country to surface processes often manifested in the form of landslides. The Philippine LILW near surface repository project site is located on the north eastern sector of the Island of Luzon in northern Philippines. This island is surrounded by active subduction trenches; to the east by the East Luzon Trough and to the west by the Manila Trench. The island is also traversed by several branches of the Philippine Fault System. The Philippine LILW repository project is located more than 100 km away from any of these major active fault systems. In the near field, the project site is located less than 10 km from a minor fault (Dummon River Fault) and more than 40 km away from a volcanic edifice (Mt. Caguas). This paper presents an analysis of the potential hazards that these active tectonic features may pose to the project site. The assessment of such geologic hazards is imperative in the characterization of the site and a crucial input in the design and safety assessment of the repository. (authors)

  7. Geological criteria for site selection of an LILW radioactive waste repository in the Philippines

    Energy Technology Data Exchange (ETDEWEB)

    Aurelio, Mario; Taguibao, Kristine Joy [National Institute of Geological Sciences, University of the Philippines, Quezon City (Philippines); Vargas, Edmundo; Palattao, Maria Visitacion; Reyes, Rolando; Nohay, Carl; Singayan, Alfonso [Philippine Nuclear Research Institute, Department of Science and Technology, Quezon City (Philippines)

    2013-07-01

    In the selection of sites for disposal facilities involving low- and intermediate-level radioactive waste (LILW), International Atomic Energy Agency (IAEA) recommendations require that 'the region in which the site is located shall be such that significant tectonic and surface processes are not expected to occur with an intensity that would compromise the required isolation capability of the repository'. Evaluating the appropriateness of a site therefore requires a deep understanding of the geological and tectonic setting of the area. The Philippines sits in a tectonically active region frequented by earthquakes and volcanic activity. Its highly variable morphology coupled with its location along the typhoon corridor in the west Pacific region subjects the country to surface processes often manifested in the form of landslides. The Philippine LILW near surface repository project site is located on the north eastern sector of the Island of Luzon in northern Philippines. This island is surrounded by active subduction trenches; to the east by the East Luzon Trough and to the west by the Manila Trench. The island is also traversed by several branches of the Philippine Fault System. The Philippine LILW repository project is located more than 100 km away from any of these major active fault systems. In the near field, the project site is located less than 10 km from a minor fault (Dummon River Fault) and more than 40 km away from a volcanic edifice (Mt. Caguas). This paper presents an analysis of the potential hazards that these active tectonic features may pose to the project site. The assessment of such geologic hazards is imperative in the characterization of the site and a crucial input in the design and safety assessment of the repository. (authors)

  8. Psychophysiological methods and criteria for the selection of individual metered loads in athletes of taekwondo section

    Directory of Open Access Journals (Sweden)

    G. V. Ohromiy

    2014-12-01

    Full Text Available Purpose: scientific rationale approaches Express-diagnostics for athletes of taekwondo section by psychophysiological parameters. Material: Total surveyed 84 people, including 68 boys and 16 girls. Were defined backup capabilities, exercise tolerance and selection of adequate individual dose of loads in preparation for the international competition, participants - taekwondo athletes. Was attended by representatives of Ukraine, Russia and Lithuania. Age groups of participants: 6 - 16 years. Athletes have different levels and different schools of training. Results: evaluation of exercise tolerance and definition of an adequate level of motor mode in taekwondo athletes in terms of the difference of lability (DL before and after training, revealed: high and very high nervous system (NS lability. These figures correspond to high and very high tolerance to physical loads. The respondents who had difference of liability (DL <0, were well-trained athletes and their high points of strength of nervous system testified about good backup capabilities (withstand great and continuous loads. In 78 % of the tested load was chosen adequately. Less than 20% of the respondents noted the average backup capabilities. They need individual correction dose loads to increase adaptive capacity. Insignificant 10%, the share of respondents had low exercise tolerance at the average values NS strength, which indicates a good backup capabilities. The direct dependence: respondents with high levels on state of health, activity and mood - low levels of anxiety, frustration, aggression and rigidity. Conclusions The proposed optimized approach Express-diagnostics according to psychophysiological parameters allow you to determine the level of physical endurance, speed adaptation athletes in the sections taekwondo and adequate response to the loads.

  9. Multi-criteria site selection for fire services: the interaction with analytic hierarchy process and geographic information systems

    Directory of Open Access Journals (Sweden)

    T. Erden

    2010-10-01

    Full Text Available This study combines AHP and GIS to provide decision makers with a model to ensure optimal site location(s for fire stations selected. The roles of AHP and GIS in determining optimal locations are explained, criteria for site selection are outlined, and case study results for finding the optimal fire station locations in Istanbul, Turkey are included. The city of Istanbul has about 13 million residents and is the largest and most populated city in Turkey. The rapid and constant growth of Istanbul has resulted in the increased number of fire related cases. Fire incidents tend to increase year by year in parallel with city expansion, population and hazardous material facilities. Istanbul has seen a rise in reported fire incidents from 12 769 in 1994 to 30 089 in 2009 according to the interim report of Istanbul Metropolitan Municipality Department of Fire Brigade. The average response time was approximately 7 min 3 s in 2009. The goal of this study is to propose optimal sites for new fire station creation to allow the Fire Brigade in Istanbul to reduce the average response time to 5 min or less. After determining the necessity of suggesting additional fire stations, the following steps are taken into account: six criteria are considered in this analysis. They are: High Population Density (HPD; Proximity to Main Roads (PMR; Distance from Existing Fire Stations (DEF; Distance from Hazardous Material Facilities (DHM; Wooden Building Density (WBD; and Distance from the Areas Subjected to Earthquake Risk (DER. DHM criterion, with the weight of 40%, is the most important criterion in this analysis. The remaining criteria have a weight range from 9% to 16%. Moreover, the following steps are performed: representation of criterion map layers in GIS environment; classification of raster datasets; calculating the result raster map (suitability map for potential fire stations; and offering a model that supports decision makers in selecting fire station sites

  10. Multi-criteria decision aid approach for the selection of the best compromise management scheme for ELVs: the case of Cyprus.

    Science.gov (United States)

    Mergias, I; Moustakas, K; Papadopoulos, A; Loizidou, M

    2007-08-25

    Each alternative scheme for treating a vehicle at its end of life has its own consequences from a social, environmental, economic and technical point of view. Furthermore, the criteria used to determine these consequences are often contradictory and not equally important. In the presence of multiple conflicting criteria, an optimal alternative scheme never exists. A multiple-criteria decision aid (MCDA) method to aid the Decision Maker (DM) in selecting the best compromise scheme for the management of End-of-Life Vehicles (ELVs) is presented in this paper. The constitution of a set of alternatives schemes, the selection of a list of relevant criteria to evaluate these alternative schemes and the choice of an appropriate management system are also analyzed in this framework. The proposed procedure relies on the PROMETHEE method which belongs to the well-known family of multiple criteria outranking methods. For this purpose, level, linear and Gaussian functions are used as preference functions.

  11. Criteria and results from the analysis of the problem of site selection for the construction of high level RAW repository

    International Nuclear Information System (INIS)

    Evstatiev, D.; Kozhoukharova, D.; Iliev, I.; Karagyuleva, J.

    1993-02-01

    The criteria for preliminary assessment of the Bulgarian territory and the results of the selection of prospective sites for future investigation concerning the choice of the suitable places for RAW repositories are presented. The selection of the prospective terrains has been performed in two stages: 1) Categorization of the country according to the prospective conditions for suitable sites and 2) Distinguishing and preliminary assessment of the suitable sites. The number of these sites was reduced to 20 by the method of successive screening. They are located in Northwest and Southeast Bulgaria and are built of marls, clays, granite, gneiss, serpentine and and volcanic rocks. The selected 20 sites has been subjected to preliminary investigation according to a programme specially worked out for the purpose. The investigation covers the analysis and summing up of the available geographical, geomorphological, geological, seismotectonic, hydrological, climatic, hydrogeological and geotechnical data, as well as a minimum of additional field research and laboratory tests. The results of the investigation of each site are presented and discussed. 1 ref

  12. Life quality evaluation in regions of the Czech Republic according to selected criteria using the DEA method

    Directory of Open Access Journals (Sweden)

    Jana Friebelová

    2011-01-01

    Full Text Available Our work has several aims. We have evaluated the Quality of life of the districts (LAU 1 regions in the Czech Republic, according to the selected criteria by the Data Envelopment Analysis (DEA method. This method was initially proposed to evaluate the efficiency. In this paper the level of efficiency represents the level of life quality. The efficiency (quality of life is in this case represented as a share of output in weighted sum of inputs. In other words, it represents a certain degree to which desirable output can offset undesirable indicators. Hence we have consider three types of input (the unemployment rate, criminality, as well as the specific emissions and one output (the average salary. In the next stage, the fourth input (the average price of a dwelling per square metre is added. Its impact on the changing of efficiency score is under consideration with regression analysis. At the same time, we have observed a possible connection between the achieved efficiency score and net migration in following year. In addition to efficiency score DEA method provides weights of particular inputs and outputs. These weights are used to find those contributions of particular criteria to the achieved score. This enables us to determine the strong and weak points of the districts.

  13. Geological Storage of CO2. Site Selection Criteria; Almacenamiento Geologico de CO2. Criterios de Selecci0n de Emplazamientos

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz, C; Martinez, R; Recreo, F; Prado, P; Campos, R; Pelayo, M; Losa, A de la; Hurtado, A; Lomba, L; Perez del Villar, L; Ortiz, G; Sastre, J; Zapatero, M A; Suarez, I; Arenillas, A

    2007-09-18

    In year 2002 the Spanish Parliament unanimously passed the ratification of the Kyoto Protocol, signed December 1997, compromising to limiting the greenhouse gas emissions increase. Later on, the Environment Ministry submitted the Spanish National Assignment Emissions Plan to the European Union and in year 2005 the Spanish Greenhouse Gas market started working, establishing taxes to pay in case of exceeding the assigned emissions limits. So, the avoided emissions of CO2 have now an economic value that is promoting new anthropogenic CO2 emissions reduction technologies. Carbon Capture and Storage (CCS) are among these new technological developments for mitigating or eliminate climate change. CO2 can be stored in geological formations such as depleted oil or gas fields, deep permeable saline water saturated formations and unmailable coal seams, among others. This report seeks to establish the selection criteria for suitable geological formations for CO2 storage in the Spanish national territory, paying attention to both the operational and performance requirements of these storage systems. The report presents the physical and chemical properties and performance of CO2 under storage conditions, the transport and reaction processes of both supercritical and gaseous CO2, and CO2 trapping mechanisms in geological formations. The main part of the report is devoted to geological criteria at watershed, site and formation scales. (Author) 100 refs.

  14. Geological Storage of CO2. Site Selection Criteria; Almacenamiento Geologico de CO2. Criterios de Seleccion de Emplazamientos

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz, C; Martinez, R; Recreo, F; Prado, P; Campos, R; Pelayo, M; Losa, A de la; Hurtado, A; Lomba, L; Perez del Villar, L; Ortiz, G; Sastre, J

    2006-07-01

    In year 2002 the Spanish Parliament unanimously passed the ratification of the Kyoto Protocol, signed December 1997, compromising to limiting the greenhouse gas emissions increase. Later on, the Environment Ministry submitted the Spanish National Assignment Emissions Plan to the European Union and in year 2005 the Spanish Greenhouse Gas market started working, establishing taxes to pay in case of exceeding the assigned emissions limits. So, the avoided emissions of CO2 have now an economic value that is promoting new anthropogenic CO2 emissions reduction technologies. Carbon Capture and Storage (CCS) are among these new technological developments for mitigating or eliminate climate change. CO2 can be stored in geological formations such as depleted oil or gas fields, deep permeable saline water saturated formations and unmineable coal seams, among others. This report seeks to establish the selection criteria for suitable geological formations for CO2 storage in the Spanish national territory, paying attention to both the operational and performance requirements of these storage systems. The report presents the physical and chemical properties and performance of CO2 under storage conditions, the transport and reaction processes of both supercritical and gaseous CO2, and CO2 trapping mechanisms in geological formations. The main part of the report is devoted to geological criteria at watershed, site and formation scales. (Author) 100 ref.

  15. The Impact of Learning Curve Model Selection and Criteria for Cost Estimation Accuracy in the DoD

    Science.gov (United States)

    2016-04-30

    different in the future due to machines” • Heightened scrutiny of cost estimates • Budget Control Act of 2011 seeks to reduce federal deficit ...qÜáêíÉÉåíÜ=^ååì~ä= ^Åèìáëáíáçå=oÉëÉ~êÅÜ= póãéçëáìã= qÜìêëÇ~ó=pÉëëáçåë= sçäìãÉ=ff= = The Impact of Learning Curve Model Selection and Criteria for Cost...Assistant Division Director, Institute for Defense Analyses Bruce Harmon, Research Staff Member, Institute for Defense Analyses The Impact of Learning

  16. A Sensor-based System for Monitoring Hard-shoulder Incursions: Review of Technologies and Selection Criteria

    Directory of Open Access Journals (Sweden)

    Michalaki Paraskevi

    2016-01-01

    Full Text Available According to safety observations from motorway operators in the United Kingdom, the hard-shoulder is occasionally violated by road users travelling in the nearside lane. These unintentional movements (hard-shoulder incursions can impose risk to operatives performing activities on the network. To further investigate these events, a sensor-based system can be used for monitoring them and collecting related data such as severity of incursion and vehicle classification. A review of vehicle detection technologies that could be applied for this purpose is presented, along with the criteria for selection of the most suitable technology and implementation sites. Two potential non-intrusive systems are also described, a laser- and a radar-based systems, which provide different levels of flexibility and data.

  17. The total cost of logistics in supplier selection, under conditions of multiple sourcing, multiple criteria and capacity constraint

    Directory of Open Access Journals (Sweden)

    Elnaz Bani

    2016-06-01

    Full Text Available This paper presents a mathematical model to solve a multi-objective decision making supplier selection problem. The proposed problem considers three objective functions: the first objective function minimizes the cost of purchasing the products while the second objective function minimizes the due dates and finally the third objective function maximizes the customer satisfaction. The resulted problem is formulated as mixed integer programming and, therefore, we use invasive weed optimization technique to solve the resulted problem. The performance of the proposed model is compared with NSGA II based on different criteria such as mean ideal distance and quality matrix. The preliminary results indicate that the proposed model performs relatively well compared with alternative method.

  18. Criteria of assessment of short track runners’ prospects as mean of promising sportsmen losses’ prevention at selection stage

    Directory of Open Access Journals (Sweden)

    S.A. Kugayevskiy

    2015-12-01

    Full Text Available Purpose: to offer main criteria for assessment of short track runners’ prospects. Material: 8 sportsmen of short track Ukrainian national team participated in the research. Influence of training means’ volume on result, shown on competition distance, was determined. Both organism’s functional and reserve potentials were assessed with the help of computer program D&K-test. Results: we have determined priority of functional indicators in selection of short track runners and for assessment of their prospects. Sportsman’s potentials shall be assessed on the base of functional fitness indicators, analysis of competition practice and training process data of pervious stage of sport perfection. Conclusions: individualization of training process, considering physiological characteristics of definite sportsman, will permit to completely open the embedded potential. Absence of sportsman’s progress with prominent functional system’s characteristics points at demand in correction of training program for his sportsman.

  19. Fatigue of Ti6Al4V Structural Health Monitoring Systems Produced by Selective Laser Melting

    Directory of Open Access Journals (Sweden)

    Maria Strantza

    2016-02-01

    Full Text Available Selective laser melting (SLM is an additive manufacturing (AM process which is used for producing metallic components. Currently, the integrity of components produced by SLM is in need of improvement due to residual stresses and unknown fracture behavior. Titanium alloys produced by AM are capable candidates for applications in aerospace and industrial fields due to their fracture resistance, fatigue behavior and corrosion resistance. On the other hand, structural health monitoring (SHM system technologies are promising and requested from the industry. SHM systems can monitor the integrity of a structure and during the last decades the research has primarily been influenced by bionic engineering. In that aspect a new philosophy for SHM has been developed: the so-called effective structural health monitoring (eSHM system. The current system uses the design freedom provided by AM. The working principle of the system is based on crack detection by means of a network of capillaries that are integrated in a structure. The main objective of this research is to evaluate the functionality of Ti6Al4V produced by the SLM process in the novel SHM system and to confirm that the eSHM system can successfully detect cracks in SLM components. In this study four-point bending fatigue tests on Ti6Al4V SLM specimens with an integrated SHM system were conducted. Fractographic analysis was performed after the final failure, while finite element simulations were used in order to determine the stress distribution in the capillary region and on the component. It was proven that the SHM system does not influence the crack initiation behavior during fatigue. The results highlight the effectiveness of the eSHM on SLM components, which can potentially be used by industrial and aerospace applications.

  20. A Methodology for the Selection of Multi-Criteria Decision Analysis Methods in Real Estate and Land Management Processes

    Directory of Open Access Journals (Sweden)

    Maria Rosaria Guarini

    2018-02-01

    Full Text Available Real estate and land management are characterised by a complex, elaborate combination of technical, regulatory and governmental factors. In Europe, Public Administrators must address the complex decision-making problems that need to be resolved, while also acting in consideration of the expectations of the different stakeholders involved in settlement transformation. In complex situations (e.g., with different aspects to be considered and multilevel actors involved, decision-making processes are often used to solve multidisciplinary and multidimensional analyses, which support the choices of those who are making the decision. Multi-Criteria Decision Analysis (MCDA methods are included among the examination and evaluation techniques considered useful by the European Community. Such analyses and techniques are performed using methods, which aim to reach a synthesis of the various forms of input data needed to define decision-making problems of a similar complexity. Thus, one or more of the conclusions reached allow for informed, well thought-out, strategic decisions. According to the technical literature on MCDA, numerous methods are applicable in different decision-making situations, however, advice for selecting the most appropriate for the specific field of application and problem have not been thoroughly investigated. In land and real estate management, numerous queries regarding evaluations often arise. In brief, the objective of this paper is to outline a procedure with which to select the method best suited to the specific queries of evaluation, which commonly arise while addressing decision-making problems. In particular issues of land and real estate management, representing the so-called “settlement sector”. The procedure will follow a theoretical-methodological approach by formulating a taxonomy of the endogenous and exogenous variables of the multi-criteria analysis methods.

  1. Comparison of the thermodynamic and correlation criteria for internal standard selection in laser-induced breakdown spectrometry

    International Nuclear Information System (INIS)

    Labutin, Timur A.; Zaytsev, Sergey M.; Popov, Andrey M.; Seliverstova, Irina V.; Bozhenko, Sergey E.; Zorov, Nikita B.

    2013-01-01

    The use of the reference line of an internal standard in LIBS is a usual way to eliminate or reduce the fluctuations of plasma parameters from pulse to pulse as well as from sample to sample. Thermodynamic criterion, i.e. closeness of excitation potentials of the analytical line and the reference one, is often used to select an appropriate reference line. In this work, we propose an alternative criterion based on searching the best correlated pairs of lines under the variations of laser energy. Two criteria were compared for high-alloy steels and soils of different origins. The discrepancy among the values of plasma temperature calculated from Fe I, Mn I and Cr I transitions was found under the conditions of slightly changed laser fluence on steel samples. On the other hand, the agreement between plasma temperatures, obtained for Fe I and Mn I transitions, was demonstrated in plasma on soil samples. Calibration results obtained for manganese in steels and lead in soils show that thermodynamic criterion can be an appropriate way for choosing an internal standard only under LTE conditions. Two lines of Mn I at 403.07 nm and 404.14 nm and Pb I at 405.78 nm were the analytical lines for the quantification of manganese in steels and lead in soils, respectively. The use of the correlative criterion seems to be suitable for internal standardization under LTE or non-LTE conditions. Probable limitations of the correlative criterion and its possibilities to identify weak lines are discussed in the article. - Highlights: • Novel criterion for internal standard selection, based on the correlation of analytical line and reference one • Comparison of correlation and thermodynamic criteria • Correlation analysis of the spectrum can be useful for atomic line identification. • Correlation approach can be used in LTE and non-LTE conditions

  2. Functionally graded Nylon-11/silica nanocomposites produced by selective laser sintering

    International Nuclear Information System (INIS)

    Chung, Haseung; Das, Suman

    2008-01-01

    Selective laser sintering (SLS), a layered manufacturing-based freeform fabrication approach was explored for constructing three-dimensional structures in functionally graded polymer nanocomposites. Here, we report on the processing and properties of functionally graded polymer nanocomposites of Nylon-11 filled with 0-10% by volume of 15 nm fumed silica nanoparticles. SLS processing parameters for the different compositions were developed by design of experiments (DOE). The densities and micro/nanostructures of the nanocomposites were examined by optical microscopy and transmission electron microscopy (TEM). The tensile and compressive properties for each composition were then tested. These properties exhibit a nonlinear variation as a function of filler volume fraction. Finally, two component designs exhibiting a one-dimensional polymer nanocomposite material gradient were fabricated. The results indicate that particulate-filled functionally graded polymer nanocomposites exhibiting a one-dimensional composition gradient can be successfully processed by SLS to produce three-dimensional components with spatially varying mechanical properties

  3. Fermented goats' milk produced with selected multiple starters as a potentially functional food.

    Science.gov (United States)

    Minervini, Fabio; Bilancia, Maria Teresa; Siragusa, Sonya; Gobbetti, Marco; Caponio, Francesco

    2009-09-01

    A screening among five lactic acid bacteria, used alone or in combination, led to select a mixed starter (Streptococcus thermophilus CR12, Lactobacillus casei LC01, Lactobacillus helveticus PR4, Lactobacillus plantarum 1288) capable to produce a fermented goats' milk containing gamma-aminobutyric acid (GABA) and angiotensin-I converting enzyme (ACE)-inhibitory peptides. The fermented milk was characterized by cell counts of lactic acid bacteria not lower than 7.0 log cfu g(-1), even after 45 days of storage at 4 degrees C. Fermentation of goats' milk resulted in the production of ca. 28 mg kg(-1) of GABA. Furthermore the fermented goats' milk had an in vitro ACE-inhibitory activity of ca. 73%. Prolonged cold storage did not significantly affect both the concentration of GABA and the ACE-inhibitory activity. Moreover, the taurine content did not significantly vary during both fermentation and the entire storage period.

  4. Scaffolds of PDLLA/bioglass 58S produced via selective laser sintering

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Rafaela do Vale; Salmoria, Gean Vitor; Moura, Marcela Oliveira Caldeira de; Aragones, Aguedo; Fredel, Marcio Celso, E-mail: rafaelavpereira@gmail.com [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil)

    2014-08-15

    Scaffolds of PDLLA were produced to be implemented in maxillofacial surgeries inducing bone repair and regeneration. To prepare these scaffolds, bioglass (BG58S) was synthesized by sol-gel method, in order to be applied as osteoconductive dispersed particles in PDLLA matrix. Once presenting greater facility on parts fabrication, this polymeric matrix enables complex geometries production besides presenting compatible degradation rate for scaffold absorption and bone regeneration. Scaffolds production was performed by selective laser sintering in order to obtain tailored-made parts. FTIR and XRD analyses were carried out to observe the composition and evaluate the presence of crystallized phases in bioglass, obtaining Wollastonite. SEM was used to observe the BG particle distribution in PDLLA matrix and flexural test was performed to evaluate the composite mechanical properties. Results showed that was possible to obtain pieces using SLS method and with addition of 10%wt BG to polymeric matrix, flexural modulus and strength increased regarding to pure polymer. (author)

  5. Characterization of 316L Steel Cellular Dodecahedron Structures Produced by Selective Laser Melting

    Directory of Open Access Journals (Sweden)

    Konda Gokuldoss Prashanth

    2016-10-01

    Full Text Available The compression behavior of different 316L steel cellular dodecahedron structures with different density values were studied. The 316L steel structures produced using the selective laser melting process has four different geometries: single unit cells with and without the addition of base plates beneath and on top, and sandwich structures with multiple unit cells with different unit cell sizes. The relation between the relative compressive strength and the relative density was compared using different Gibson-Ashby models and with other published reports. The different aspects of the deformation and the mechanical properties were evaluated and the deformation at distinct loading levels was recorded. Finite element method (FEM simulations were carried out with the defined structures and the mechanical testing results were compared. The calculated theory, simulation estimation, and the observed experimental results are in good agreement.

  6. Microstructure and mechanical properties of Al-12Si produced by selective laser melting

    Science.gov (United States)

    Fefelov, A. S.; Merkushev, A. G.; Chikova, O. A.

    2017-10-01

    Al-12Si specimens are produced by selective laser melting (SLM) from gas atomized powders. Installation for the production of powder is original. All specimens were prepared using the EOSINT M 280 device. A fine cellular structure is observed with residual free Si along the cellular boundaries. Room temperature tensile tests reveal remarkable mechanical behavior: the samples show yield and tensile strengths of about 102 MPa and 425 MPa, respectively, along with fracture strain of 12%. The study of crack surface morphology was shown by the example of a sample. Except the spherical pores, the interface of the molten pool also appears on the fracture surface, which indicates a mixture of fragile and ductile fracture. Additionally, the agglomerated silicon group appears also on the fracture surface.

  7. Selection of bacteriocin producer strains of lactic acid bacteria from a dairy environment.

    Science.gov (United States)

    Lasagno, M; Beoleito, V; Sesma, F; Raya, R; Font de Valdez, G; Eraso, A

    2002-01-01

    Two strains showing bacteriocin production were selected from a total of 206 lactic acid bacteria isolated from samples of milk, milk serum, whey and homemade cheeses in Southern Cordoba, Argentina. This property was detected by means of well diffusion assays. The strains were identified as Enterococcus hirae and Enterococcus durans. The protein nature of those substances was proved by showing their sensitivity to type IV and XXV proteases, papaine, trypsin, pepsin and K proteinase. The bacteriocins inhibited the growth of Listeria monocytogenes, Bacillus cereus, Clostridium perfringes and two strains of Staphylococcus aureus, an A-enterotoxin and a B-enterotoxin producers. All of these bacteria are common pathogens usually associated with food borne diseases (ETA). These lactic acid bacteria or their bacteriocins could be suitable candidates for food preservation and specially useful in the our regional dairy industry.

  8. Microstructure of Ti-6Al-4V produced by selective laser melting

    International Nuclear Information System (INIS)

    Simonelli, M; Tse, Y Y; Tuck, C

    2012-01-01

    Ti-6Al-4V is the most widely used titanium alloy. Manufacturing of Ti-6Al-4V components using novel additive processing techniques such as selective laser melting is of great interest. This study focuses on the microstructure characterisation of Ti-6Al-4V components produced by selective laser melting (SLM) with full (Ti-6Al-4V base plate) and partial (Ti-6Al-4V needle-shaped bed) support. The starting material, a plasma atomised powder, and the component products are studied using various microscopy techniques including optical, scanning electron and transmission electron microscopy and electron backscattered diffraction (EBSD). Powder particles are fully dense, possess a spherical shape and are composed of acicular α phase. The as-built material shows oriented acicular martensitic phase with well defined columnar grains. The morphology of martensitic phase and microstructural evolution will be discussed in relation to the SLM processing parameters employed and the different cooling rates experienced by the components.

  9. Receiver Test Selection Criteria

    Science.gov (United States)

    2015-03-12

    The DOT requests that GPS manufacturers submit receivers for test in the following TWG categories: - Aviation (non-certified), cellular, general location/navigation, high precision, timing, networks, and space-based receivers - Each receiver should b...

  10. Integrating knowledge-based multi-criteria evaluation techniques with GIS for landfill site selection: A case study using AHP

    Directory of Open Access Journals (Sweden)

    Fagbohun B.J.

    2016-09-01

    Full Text Available A major challenge in most growing urban areas of developing countries, without a pre-existing land use plan is the sustainable and efficient management of solid wastes. Siting a landfill is a complicated task because of several environmental regulations. This challenge gives birth to the need to develop efficient strategies for the selection of proper waste disposal sites in accordance with all existing environmental regulations. This paper presents a knowledge-based multi-criteria decision analysis using GIS for the selection of suitable landfill site in Ado-Ekiti, Nigeria. In order to identify suitable sites for landfill, seven factors - land use/cover, geology, river, soil, slope, lineament and roads - were taken into consideration. Each factor was classified and ranked based on prior knowledge about the area and existing guidelines. Weights for each factor were determined through pair-wise comparison using Saaty’s 9 point scale and AHP. The integration of factors according to their weights using weighted index overlay analysis revealed that 39.23 km2 within the area was suitable to site a landfill. The resulting suitable area was classified as high suitability covering 6.47 km2 (16.49%, moderate suitability 25.48 km2 (64.95% and low suitability 7.28 km2 (18.56% based on their overall weights.

  11. GIS-BASED SOLAR AND WIND TURBINE SITE SELECTION USING MULTI-CRITERIA ANALYSIS: CASE STUDY TEHRAN, IRAN

    Directory of Open Access Journals (Sweden)

    M. Sadeghi

    2017-09-01

    Full Text Available Renewable energy has less negative impacts on environment than fossil fuels. Iran has many resources for renewable energy exploitation but because of their high price, it has not been developed. Site selection is an important step for utilizing large investments like solar farms and wind turbines. Multi-criteria evaluation methods are commonly used for site selection. The purpose of this paper is to determine suitable sites for solar farm and wind turbine using GIS and AHP in Tehran, in order to generate a distributed network to increase power network stability. The final land suitability index was grouped in four categories as “most suitable”, “suitable”, “moderate” and “low suitable”. As a result 94.61% (789939.63 km2 is low suitable, 4.47% (37337.17 km2 is moderate, 0.59% (4964.22 km2 is suitable and 0.32% (2680.70 km2 is the most suitable for building wind turbine and for solar farm, 44.07% (8116.88 km2 is low suitable, 12.81% (2359.79 km2 is moderate, 35.10% (6464.29 km2 is suitable and 8.02% (1477.28 km2 is the most suitable.

  12. Gis-Based Solar and Wind Turbine Site Selection Using Multi-Criteria Analysis: Case Study Tehran, Iran

    Science.gov (United States)

    Sadeghi, M.; Karimi, M.

    2017-09-01

    Renewable energy has less negative impacts on environment than fossil fuels. Iran has many resources for renewable energy exploitation but because of their high price, it has not been developed. Site selection is an important step for utilizing large investments like solar farms and wind turbines. Multi-criteria evaluation methods are commonly used for site selection. The purpose of this paper is to determine suitable sites for solar farm and wind turbine using GIS and AHP in Tehran, in order to generate a distributed network to increase power network stability. The final land suitability index was grouped in four categories as "most suitable", "suitable", "moderate" and "low suitable". As a result 94.61% (789939.63 km2) is low suitable, 4.47% (37337.17 km2) is moderate, 0.59% (4964.22 km2) is suitable and 0.32% (2680.70 km2) is the most suitable for building wind turbine and for solar farm, 44.07% (8116.88 km2) is low suitable, 12.81% (2359.79 km2) is moderate, 35.10% (6464.29 km2) is suitable and 8.02% (1477.28 km2) is the most suitable.

  13. Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting.

    Science.gov (United States)

    Van Hooreweder, Brecht; Apers, Yanni; Lietaert, Karel; Kruth, Jean-Pierre

    2017-01-01

    This paper provides new insights into the fatigue properties of porous metallic biomaterials produced by additive manufacturing. Cylindrical porous samples with diamond unit cells were produced from Ti6Al4V powder using Selective Laser Melting (SLM). After measuring all morphological and quasi-static properties, compression-compression fatigue tests were performed to determine fatigue strength and to identify important fatigue influencing factors. In a next step, post-SLM treatments were used to improve the fatigue life of these biomaterials by changing the microstructure and by reducing stress concentrators and surface roughness. In particular, the influence of stress relieving, hot isostatic pressing and chemical etching was studied. Analytical and numerical techniques were developed to calculate the maximum local tensile stress in the struts as function of the strut diameter and load. With this method, the variability in the relative density between all samples was taken into account. The local stress in the struts was then used to quantify the exact influence of the applied post-SLM treatments on the fatigue life. A significant improvement of the fatigue life was achieved. Also, the post-SLM treatments, procedures and calculation methods can be applied to different types of porous metallic structures and hence this paper provides useful tools for improving fatigue performance of metallic biomaterials. Additive Manufacturing (AM) techniques such as Selective Laser Melting (SLM) are increasingly being used for producing customized porous metallic biomaterials. These biomaterials are regularly used for biomedical implants and hence a long lifetime is required. In this paper, a set of post-built surface and heat treatments is presented that can be used to significantly improve the fatigue life of porous SLM-Ti6Al4V samples. In addition, a novel and efficient analytical local stress method was developed to accurately quantify the influence of the post

  14. Which family physician should I choose? The analytic hierarchy process approach for ranking of criteria in the selection of a family physician.

    Science.gov (United States)

    Kuruoglu, Emel; Guldal, Dilek; Mevsim, Vildan; Gunvar, Tolga

    2015-08-05

    Choosing the most appropriate family physician (FP) for the individual, plays a fundamental role in primary care. The aim of this study is to determine the selection criteria for the patients in choosing their family doctors and priority ranking of these criteria by using the multi-criteria decision-making method of the Analytic Hierarchy Process (AHP) model. The study was planned and conducted in two phases. In the first phase, factors affecting the patients' decisions were revealed with a qualitative research. In the next phase, the priorities of FP selection criteria were determined by using AHP model. Criteria were compared in pairs. 96 patient were asked to fill the information forms which contains comparison scores in the Family Health Centres. According to the analysis of focus group discussions FP selection criteria were congregated in to five groups: Individual Characteristics, Patient-Doctor relationship, Professional characteristics, the Setting, and Ethical Characteristics. For each of the 96 participants, comparison matrixes were formed based on the scores of their information forms. Of these, models of only 5 (5.2 %) of the participants were consistent, in other words, they have been able to score consistent ranking. The consistency ratios (CR) were found to be smaller than 0.10. Therefore the comparison matrix of this new model, which was formed based on the medians of scores only given by these 5 participants, was consistent (CR = 0.06 < 0.10). According to comparison results; with a 0.467 value-weight, the most important criterion for choosing a family physician is his/her 'Professional characteristics'. Selection criteria for choosing a FP were put in a priority order by using AHP model. These criteria can be used as measures for selecting alternative FPs in further researches.

  15. Application of a multi-criteria analysis for the selection of the most suitable energy source and water desalination system in Mauritania

    International Nuclear Information System (INIS)

    Bayod Rujula, Angel Antonio; Dia, Nourou Khalidou

    2010-01-01

    Water deficits and their associated shortages are serious problems in many areas of the world. The paper presents a multi-criteria analysis for selection of the most suitable system in Mauritania. Six scenarios, different energy sources, technologies of water desalination processes and water use and five criteria are analyzed. The multi-criteria analysis shows that the optimal solution is different for each scenario; in some cases the photovoltaic-reverse osmosis option is preferable; in others, the best option is reverse-osmosis powered by wind energy or concentrating solar parabolic.

  16. Chronically administered 3-nitropropionic acid produces selective lesions in the striatum and reduces muscle tonus.

    Science.gov (United States)

    Shimano, Y; Kumazaki, M; Sakurai, T; Hida, H; Fujimoto, I; Fukuda, A; Nishino, H

    1995-12-01

    Systemically administered 3-nitropropionic acid (3- NPA), irreversible inhibitor of succinate dehydrogenase, produced characteristic bilateral lesions in the striatum (STR) in the rat. Inside the lesion, neutrophils invaded and strong immunoreaction for IgG as well as complement factor C3b/C4b receptor (C3b/C4br) were observed. The core of the lesion lost the immunoreaction for glial fibrillary acidic protein (GFAP) while the marginal area had abundant GFAP-labeled astrocytes around the vessels. Intoxicated rats often became somnolent and were awkward in cooperative movement on a pole climbing test, but they had a quite good memory retention in a passive avoidance learning. Muscle tonus in some of the intoxicated rats became hypotonic with low voltage electromyogram (EMG) activity, especially in lower limbs. In summary, 3-NPA intoxicated rats had selective bilateral lesions in the STR and exhibited disturbances in a cooperative movement owing to the impairment in muscle tonus, thus it would be a useful animal model to deduce the central pathogenesis of Huntington's disease.

  17. MONITORING OF A GLUTEN CONTENT IN SELECTED MEAT PRODUCTS FROM THREE BIGGEST MEAT PRODUCERS IN SLOVAKIA

    Directory of Open Access Journals (Sweden)

    Ladislav Staruch

    2012-02-01

    Full Text Available The work is focused on a monitoring of a gluten content in selected meat products from three biggest and most popular meat producers in Slovakia. Gluten is a type of protein complex which is typical naturally presented component of wheat, barley and rye. Flour from this sources with natural gluten content is also added into the some type of meat products and other foodstuffs for a technological reasons hand in hand with economic reasons.  Some of the gluten quantities could be hazardous for sensitive people as celiatics and allergic to gluten. Within the context of this reasons there is a need to control the amounts of this hidden type of gluten inclusive of spice mixes using in a meat production. Monitoring by itself was realized with a use of the sandwich ELISA RIDASCREEN® Fast Gliadin test. ELISA means enzyme linked immunosorbent assay. It is based on a specific reaction among the enzyme and antigen leading to a creation of a complex.  This test provides us exact quantitification of a gluten content in this type of food products using a colorimetric reaction of a complex by observing of all fundamentals of this technique. There were analysed 16 meat products and 5 types of spice mixes in total.doi:10.5219/167

  18. Tribological behavior of Ti6Al4V cellular structures produced by Selective Laser Melting.

    Science.gov (United States)

    Bartolomeu, F; Sampaio, M; Carvalho, O; Pinto, E; Alves, N; Gomes, J R; Silva, F S; Miranda, G

    2017-05-01

    Additive manufacturing (AM) technologies enable the fabrication of innovative structures with complex geometries not easily manufactured by traditional processes. Regarding metallic cellular structures with tailored/customized mechanical and wear performance aiming to biomedical applications, Selective Laser Melting (SLM) is a remarkable solution for their production. Focusing on prosthesis and implants, in addition to a suitable Young's modulus it is important to assess the friction response and wear resistance of these cellular structures in a natural environment. In this sense, five cellular Ti6Al4V structures with different open-cell sizes (100-500µm) were designed and produced by SLM. These structures were tribologicaly tested against alumina using a reciprocating sliding ball-on-plate tribometer. Samples were submerged in Phosphate Buffered Saline (PBS) fluid at 37°C, in order to mimic in some extent the human body environment. The results showed that friction and wear performance of Ti6Al4V cellular structures is influenced by the structure open-cell size. The higher wear resistance was obtained for structures with 100µm designed open-cell size due to the higher apparent area of contact to support tribological loading. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Structural properties of H13 tool steel parts produced with use of selective laser melting technology

    International Nuclear Information System (INIS)

    Šafka, J; Ackermann, M; Voleský, L

    2016-01-01

    This paper deals with establishing of building parameters for 1.2344 (H13) tool steel processed using Selective Laser Melting (SLM) technology with layer thickness of 50 µm. In the first part of the work, testing matrix of models in the form of a cube with chamfered edge were built under various building parameters such as laser scanning speed and laser power. Resulting models were subjected to set of tests including measurement of surface roughness, inspection of inner structure with aid of Light Optical Microscopy and Scanning Electron Microscopy and evaluation of micro-hardness. These tests helped us to evaluate an influence of changes in building strategy to the properties of the resulting model. In the second part of the work, mechanical properties of the H13 steel were examined. For this purpose, the set of samples in the form of “dog bone” were printed under three different alignments towards the building plate and tested on universal testing machine. Mechanical testing of the samples should then reveal if the different orientation and thus different layering of the material somehow influence its mechanical properties. For this type of material, the producer provides the parameters for layer thickness of 30 µm only. Thus, our 50 µm building strategy brings shortening of the building time which is valuable especially for large models. Results of mechanical tests show slight variation in mechanical properties for various alignment of the sample. (paper)

  20. Structural properties of H13 tool steel parts produced with use of selective laser melting technology

    Science.gov (United States)

    Šafka, J.; Ackermann, M.; Voleský, L.

    2016-04-01

    This paper deals with establishing of building parameters for 1.2344 (H13) tool steel processed using Selective Laser Melting (SLM) technology with layer thickness of 50 µm. In the first part of the work, testing matrix of models in the form of a cube with chamfered edge were built under various building parameters such as laser scanning speed and laser power. Resulting models were subjected to set of tests including measurement of surface roughness, inspection of inner structure with aid of Light Optical Microscopy and Scanning Electron Microscopy and evaluation of micro-hardness. These tests helped us to evaluate an influence of changes in building strategy to the properties of the resulting model. In the second part of the work, mechanical properties of the H13 steel were examined. For this purpose, the set of samples in the form of “dog bone” were printed under three different alignments towards the building plate and tested on universal testing machine. Mechanical testing of the samples should then reveal if the different orientation and thus different layering of the material somehow influence its mechanical properties. For this type of material, the producer provides the parameters for layer thickness of 30 µm only. Thus, our 50 µm building strategy brings shortening of the building time which is valuable especially for large models. Results of mechanical tests show slight variation in mechanical properties for various alignment of the sample.

  1. Comparison of productive and carcass traits and economic value of lines selected for different criteria, slaughtered at similar weights

    Directory of Open Access Journals (Sweden)

    K. Szendrő

    2016-03-01

    Full Text Available The aim of the experiment was to compare 3 genetic groups, slaughtered at similar weights, to examine their productive and carcass traits and economic value. Three lines of the Pannon Breeding Programme, selected for different criteria, were examined in the experiment. Pannon Ka (PKa, maternal line does were inseminated with semen of PKa, Pannon White (PWhite or Pannon Large (PLarge, terminal line bucks. The kits (PKa×PKa, PWhite×PKa, PLarge×PKa; n=60 in each genetic group were weaned at 35 d of age and reared until 88, 83 and 79, respectively, when they reached similar body weights for slaughtering (2.8 kg. The weight gain of PLarge×PKa was the largest (51.0 g/d and that of PKa×PKa was the smallest (47.2 g/d, while PWhite×PKa (41.8 g/d was intermediate (P<0.001. Difference was found in feed conversion ratio between weaning and the age of slaughter  PKa×PKa: 3.03 respect to PWhite×PKa: 2.75 and PLarge×PKa: 2.66; , P<0.05. Dressing out percentage and ratio of hind part to reference carcass of PWhite×PKa, PLarge×PKa and PKa×PKa were 62.4 and 37.7, 61.8 and 37.5, 61.3 and 36.8%, respectively (P<0.01. Results show that PLarge×PKa rabbits were able to exceed the average economic indicators compared to other groups. It may be concluded that the production performance of growing rabbits was affected by the adult weight, but the carcass traits were influenced by the computer tomography (CT-based selection.

  2. Doctoral Advisor-Advisee Pairing in STEM Fields: Selection Criteria and Impact of Faculty, Student and Departmental Factors

    Directory of Open Access Journals (Sweden)

    Simy Joy

    2015-09-01

    Full Text Available Unlike the doctoral programs in places where students are paired with advisors at the time of admission itself, most US programs require the students to choose their advisors, and the advisors to formally accept the students as advisees. Little research has been done to understand how students and faculty approach this mutual selection and pairing process. This paper examines this process in STEM departments (Science, Technology, Engineering and Mathematics, with specific focus on factors influencing the decisions. Based on focus groups and interviews of doctoral students and faculty from STEM departments in an American university, we identify criteria applied by students and faculty in making their choices. Students were found to assess faculty on available funding, area of research, personality, ability to graduate students fast, and career prospects for students, and faculty to assess students on their qualifications/credentials and perceived ability to contribute to research. We also found that this mutual assessment was not objective, but influenced by perceptions associated with faculty gender and career stage, and student nationality. In the end, whether students and faculty were actually paired with persons of their choice depended on departmental factors including prevalent pairing practices, restrictions on student numbers per faculty, and reward structure. We discuss implications of the findings for research and practice.

  3. The impact of search engine selection and sorting criteria on vaccination beliefs and attitudes: two experiments manipulating Google output.

    Science.gov (United States)

    Allam, Ahmed; Schulz, Peter Johannes; Nakamoto, Kent

    2014-04-02

    During the past 2 decades, the Internet has evolved to become a necessity in our daily lives. The selection and sorting algorithms of search engines exert tremendous influence over the global spread of information and other communication processes. This study is concerned with demonstrating the influence of selection and sorting/ranking criteria operating in search engines on users' knowledge, beliefs, and attitudes of websites about vaccination. In particular, it is to compare the effects of search engines that deliver websites emphasizing on the pro side of vaccination with those focusing on the con side and with normal Google as a control group. We conducted 2 online experiments using manipulated search engines. A pilot study was to verify the existence of dangerous health literacy in connection with searching and using health information on the Internet by exploring the effect of 2 manipulated search engines that yielded either pro or con vaccination sites only, with a group receiving normal Google as control. A pre-post test design was used; participants were American marketing students enrolled in a study-abroad program in Lugano, Switzerland. The second experiment manipulated the search engine by applying different ratios of con versus pro vaccination webpages displayed in the search results. Participants were recruited from Amazon's Mechanical Turk platform where it was published as a human intelligence task (HIT). Both experiments showed knowledge highest in the group offered only pro vaccination sites (Z=-2.088, P=.03; Kruskal-Wallis H test [H₅]=11.30, P=.04). They acknowledged the importance/benefits (Z=-2.326, P=.02; H5=11.34, P=.04) and effectiveness (Z=-2.230, P=.03) of vaccination more, whereas groups offered antivaccination sites only showed increased concern about effects (Z=-2.582, P=.01; H₅=16.88, P=.005) and harmful health outcomes (Z=-2.200, P=.02) of vaccination. Normal Google users perceived information quality to be positive despite a

  4. The biocompatibility of dense and porous Nickel-Titanium produced by selective laser melting

    Energy Technology Data Exchange (ETDEWEB)

    Habijan, T., E-mail: Tim.Habijan@rub.de [Surgical Research, Department of Surgery, BG Kliniken Bergmannsheil, Ruhr-University Bochum, Buerkle-de-la-Camp-Platz 1, 44789 Bochum (Germany); Haberland, C.; Meier, H. [Institute Product and Service Engineering, Ruhr-University Bochum (Germany); Frenzel, J. [Institute for Materials, Ruhr-University Bochum (Germany); Wittsiepe, J. [Department of Hygiene, Social and Environmental Medicine, Ruhr-University Bochum (Germany); Wuwer, C.; Greulich, C.; Schildhauer, T.A.; Koeller, M. [Surgical Research, Department of Surgery, BG Kliniken Bergmannsheil, Ruhr-University Bochum, Buerkle-de-la-Camp-Platz 1, 44789 Bochum (Germany)

    2013-01-01

    Nickel-Titanium shape memory alloys (NiTi-SMA) are of biomedical interest due to their unusual range of pure elastic deformability and their elastic modulus, which is closer to that of bone than any other metallic or ceramic material. Newly developed porous NiTi, produced by Selective Laser Melting (SLM), is currently under investigation as a potential carrier material for human mesenchymal stem cells (hMSC). SLM enables the production of highly complex and tailor-made implants for patients on the basis of CT data. Such implants could be used for the reconstruction of the skull, face, or pelvis. hMSC are a promising cell type for regenerative medicine and tissue engineering due to their ability to support the regeneration of critical size bone defects. Loading porous SLM-NiTi implants with autologous hMSC may enhance bone growth and healing for critical bone defects. The purpose of this study was to assess whether porous SLM-NiTi is a suitable carrier for hMSC. Specimens of varying porosity and surface structure were fabricated via SLM. hMSC were cultured for 8 days on NiTi specimens, and cell viability was analyzed using two-color fluorescence staining. Viable cells were detected on all specimens after 8 days of cell culture. Cell morphology and surface topography were analyzed by scanning electron microscopy (SEM). Cell morphology and surface topology were dependent on the orientation of the specimens during SLM production. The Nickel ion release can be reduced significantly by aligned laser processing conditions. The presented results clearly attest that both dense SLM-NiTi and porous SLM-NiTi are suitable carriers for hMSC. Nevertheless, before carrying out in vivo studies, some work on optimization of the manufacturing process and post-processing is required. - Highlights: Black-Right-Pointing-Pointer Specimens, varying in porosity and surface structure were produced via SLM. Black-Right-Pointing-Pointer Biocompatibility of these specimens was analyzed. Black

  5. The biocompatibility of dense and porous Nickel–Titanium produced by selective laser melting

    International Nuclear Information System (INIS)

    Habijan, T.; Haberland, C.; Meier, H.; Frenzel, J.; Wittsiepe, J.; Wuwer, C.; Greulich, C.; Schildhauer, T.A.; Köller, M.

    2013-01-01

    Nickel–Titanium shape memory alloys (NiTi-SMA) are of biomedical interest due to their unusual range of pure elastic deformability and their elastic modulus, which is closer to that of bone than any other metallic or ceramic material. Newly developed porous NiTi, produced by Selective Laser Melting (SLM), is currently under investigation as a potential carrier material for human mesenchymal stem cells (hMSC). SLM enables the production of highly complex and tailor-made implants for patients on the basis of CT data. Such implants could be used for the reconstruction of the skull, face, or pelvis. hMSC are a promising cell type for regenerative medicine and tissue engineering due to their ability to support the regeneration of critical size bone defects. Loading porous SLM-NiTi implants with autologous hMSC may enhance bone growth and healing for critical bone defects. The purpose of this study was to assess whether porous SLM-NiTi is a suitable carrier for hMSC. Specimens of varying porosity and surface structure were fabricated via SLM. hMSC were cultured for 8 days on NiTi specimens, and cell viability was analyzed using two-color fluorescence staining. Viable cells were detected on all specimens after 8 days of cell culture. Cell morphology and surface topography were analyzed by scanning electron microscopy (SEM). Cell morphology and surface topology were dependent on the orientation of the specimens during SLM production. The Nickel ion release can be reduced significantly by aligned laser processing conditions. The presented results clearly attest that both dense SLM-NiTi and porous SLM-NiTi are suitable carriers for hMSC. Nevertheless, before carrying out in vivo studies, some work on optimization of the manufacturing process and post-processing is required. - Highlights: ► Specimens, varying in porosity and surface structure were produced via SLM. ► Biocompatibility of these specimens was analyzed. ► All specimens were completely coated with a layer

  6. Multi criteria decision making to select the best method for the preparation of solid lipid nanoparticles of rasagiline mesylate using analytic hierarchy process

    Directory of Open Access Journals (Sweden)

    Viveksarathi Kunasekaran

    2014-01-01

    Full Text Available The objective of this study was to select best method for the development of rasagiline mesylate (RM loaded nanoscale solid lipid particles using analytic hierarchy process (AHP. Improper method selection may lead to waste of time, loss of material and financial resources. One of the possibilities to overcome these difficulties, AHP was employed to find the suitable method. In the AHP, a decision of hierarchy was constructed with a goal, criteria, sub-criteria, and alternatives. After constructing the AHP, the expert choice software was used to compute the overall priority of criteria, sub-criteria and alternatives. The best alternative selected was based on the highest priority. Nanoscale solid lipid particles of RM was formulated by the selected microemulsion method (M4 and it shows the particle size, polydispersity index and zeta potential were within acceptable limits. Drug content and entrapment efficiency of the RM-solid lipid nanoparticles were 97.26% and 86.57%, respectively. This study concludes that the AHP was viable and effective tool for selecting a most suitable method for the fabrication of RM loaded nanoscale solid lipid particles.

  7. Selection of suitable alternatives to reduce the environmental impact of road traffic noise using a fuzzy multi-criteria decision model

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz-Padillo, Alejandro, E-mail: aruizp@correo.ugr.es [Industrial Engineering and Transportation Department, Federal University of Rio Grande do Sul (UFRGS), Av. Osvaldo Aranha, 99 – 5° andar, Porto Alegre - CEP 90.035-190, Rio Grande do Sul (Brazil); Civil Engineering Department, University of Granada, Av. Fuentenueva s/n, 18071 Granada (Spain); Ruiz, Diego P., E-mail: druiz@ugr.es [Information Technology and Communication Research Center (CITIC-UGR), Applied Physics Department, University of Granada, Av. Fuentenueva s/n, 18071 Granada (Spain); Torija, Antonio J., E-mail: ajtorija@ugr.es [ISVR, University of Southampton, Highfield Campus, SO17 1BJ Southampton (United Kingdom); Ramos-Ridao, Ángel, E-mail: ramosr@ugr.es [Civil Engineering Department, University of Granada, Av. Fuentenueva s/n, 18071 Granada (Spain)

    2016-11-15

    Road traffic noise is one of the most significant environmental impacts generated by transport systems. To this regard, the recent implementation of the European Environmental Noise Directive by Public Administrations of the European Union member countries has led to various noise action plans (NAPs) for reducing the noise exposure of EU inhabitants. Every country or administration is responsible for applying criteria based on their own experience or expert knowledge, but there is no regulated process for the prioritization of technical measures within these plans. This paper proposes a multi-criteria decision methodology for the selection of suitable alternatives against traffic noise in each of the road stretches included in the NAPs. The methodology first defines the main criteria and alternatives to be considered. Secondly, it determines the relative weights for the criteria and sub-criteria using the fuzzy extended analytical hierarchy process as applied to the results from an expert panel, thereby allowing expert knowledge to be captured in an automated way. A final step comprises the use of discrete multi-criteria analysis methods such as weighted sum, ELECTRE and TOPSIS, to rank the alternatives by suitability. To illustrate an application of the proposed methodology, this paper describes its implementation in a complex real case study: the selection of optimal technical solutions against traffic noise in the top priority road stretch included in the revision of the NAP of the regional road network in the province of Almeria (Spain).

  8. Selection of suitable alternatives to reduce the environmental impact of road traffic noise using a fuzzy multi-criteria decision model

    International Nuclear Information System (INIS)

    Ruiz-Padillo, Alejandro; Ruiz, Diego P.; Torija, Antonio J.; Ramos-Ridao, Ángel

    2016-01-01

    Road traffic noise is one of the most significant environmental impacts generated by transport systems. To this regard, the recent implementation of the European Environmental Noise Directive by Public Administrations of the European Union member countries has led to various noise action plans (NAPs) for reducing the noise exposure of EU inhabitants. Every country or administration is responsible for applying criteria based on their own experience or expert knowledge, but there is no regulated process for the prioritization of technical measures within these plans. This paper proposes a multi-criteria decision methodology for the selection of suitable alternatives against traffic noise in each of the road stretches included in the NAPs. The methodology first defines the main criteria and alternatives to be considered. Secondly, it determines the relative weights for the criteria and sub-criteria using the fuzzy extended analytical hierarchy process as applied to the results from an expert panel, thereby allowing expert knowledge to be captured in an automated way. A final step comprises the use of discrete multi-criteria analysis methods such as weighted sum, ELECTRE and TOPSIS, to rank the alternatives by suitability. To illustrate an application of the proposed methodology, this paper describes its implementation in a complex real case study: the selection of optimal technical solutions against traffic noise in the top priority road stretch included in the revision of the NAP of the regional road network in the province of Almeria (Spain).

  9. [Cloning goat producing human lactoferrin with genetically modified donor cells selected by single or dual markers].

    Science.gov (United States)

    An, Liyou; Yuan, Yuguo; Yu, Baoli; Yang, Tingjia; Cheng, Yong

    2012-12-01

    We compared the efficiency of cloning goat using human lactoferrin (hLF) with genetically modified donor cells marked by single (Neo(r)) or double (Neo(r)/GFP) markers. Single marker expression vector (pBLC14) or dual markers expression vector (pAPLM) was delivered to goat fetal fibroblasts (GFF), and then the transgenic GFF was used as donor cells to produce transgenic goats. Respectively, 58.8% (20/34) and 86.7% (26/30) resistant cell lines confirmed the transgenic integration by PCR. Moreover, pAPLM cells lines were subcultured with several passages, only 20% (6/30) cell lines was observed fluorescence from each cell during the cell passage. Somatic cell nuclear transfer using the donor cells harbouring pBLC14 or pAPLM construct, resulting in a total of 806 reconstructed embryos, a pregnancy rate at 35 d (53.8%, 39.1%) and 60 d (26.9%, 21.7%), and an offspring birth rate (1.9%, 1.4%) with 5 and 7 newborn cloned goats, respectively. Transgene was confirmed by PCR and southern-blot in all cloned offspring. There were no significant differences at the reconstructed embryo fusion rates, pregnancy rates and the birth rate (P > 0.05) between single and double markers groups. The Neo(r)/GFP double markers could improve the reliability for accurately and efficiently selecting the genetically modified donor cells. No adverse effect was observed on the efficiency of transgenic goat production by SCNT using somatic cells transfected with double (Neo(r)/GFP) markers vector.

  10. Trace metal contents of selected seeds and vegetables from oil producing areas of Nigeria.

    Science.gov (United States)

    Wegwu, Matthew O; Omeodu, Stephen I

    2010-07-01

    The concentrations of accumulated trace metals in selected seeds and vegetables collected in the oil producing Rivers State of Nigeria were investigated. The values were compared with those of seeds and vegetables cultivated in Owerri, a less industrialized area in Nigeria. The lead (Pb) and cadmium (Cd) contents of the seeds obtained from Rivers State ranged between 0.10 and 0.23 microg/g dry weight, while those of the seeds cultivated in Owerri fell below the detection limit of 0.01 microg/g dry weight. The highest manganese (Mn) level (902 microg/g dry weight) was found in Irvingia garbonesis seeds cultivated in Rivers State. Similarly, the highest nickel (Ni) value (199 microg/g dry weight) was also obtained in I. garbonesis, however, in the seeds sampled in Owerri. The highest copper (Cu), zinc (Zn), and iron (Fe) levels (16.8, 5.27, and 26.2 microg/g dry weight, resp.) were detected in seeds collected in Rivers State. With the exception of Talinum triangulae, Ocinum gratissimum, and Piper guineese, with Pb levels of 0.09, 0.10, and 0.11 microg/g dry weight, respectively, the Pb and Cd levels in the vegetables grown in Owerri fell below the detection limit of 0.01 microg/g dry weight. The trace metal with the highest levels in all the vegetables studied was Mn, followed by Fe. The highest concentrations of Ni and Cu occurred in vegetables collected from Rivers State, while the highest level of Zn was observed in Piper guineese collected in Owerri, with a value of 21.4 microg/g dry weight. Although the trace metal concentrations of the seeds and vegetables collected in Rivers State tended to be higher than those of the seeds and vegetables grown in Owerri, the average levels of trace metals obtained in this study fell far below the WHO specifications for metals in foods.

  11. Selecting elephant grass families and progenies to produce bioenergy through mixed models (REML/BLUP).

    Science.gov (United States)

    Rodrigues, E V; Daher, R F; Dos Santos, A; Vivas, M; Machado, J C; Gravina, G do A; de Souza, Y P; Vidal, A K; Rocha, A Dos S; Freitas, R S

    2017-05-18

    Brazil has great potential to produce bioenergy since it is located in a tropical region that receives high incidence of solar energy and presents favorable climatic conditions for such purpose. However, the use of bioenergy in the country is below its productivity potential. The aim of the current study was to select full-sib progenies and families of elephant grass (Pennisetum purpureum S.) to optimize phenotypes relevant to bioenergy production through mixed models (REML/BLUP). The circulating diallel-based crossing of ten elephant grass genotypes was performed. An experimental design using the randomized block methodology, with three repetitions, was set to assess both the hybrids and the parents. Each plot comprised 14-m rows, 1.40 m spacing between rows, and 1.40 m spacing between plants. The number of tillers, plant height, culm diameter, fresh biomass production, dry biomass rate, and the dry biomass production were assessed. Genetic-statistical analyses were performed through mixed models (REML/BLUP). The genetic variance in the assessed families was explained through additive genetic effects and dominance genetic effects; the dominance variance was prevalent. Families such as Capim Cana D'África x Guaçu/I.Z.2, Cameroon x Cuba-115, CPAC x Cuba-115, Cameroon x Guaçu/I.Z.2, and IAC-Campinas x CPAC showed the highest dry biomass production. The family derived from the crossing between Cana D'África and Guaçu/I.Z.2 showed the largest number of potential individuals for traits such as plant height, culm diameter, fresh biomass production, dry biomass production, and dry biomass rate. The individual 5 in the family Cana D'África x Guaçu/I.Z.2, planted in blocks 1 and 2, showed the highest dry biomass production.

  12. The biocompatibility of dense and porous Nickel-Titanium produced by selective laser melting.

    Science.gov (United States)

    Habijan, T; Haberland, C; Meier, H; Frenzel, J; Wittsiepe, J; Wuwer, C; Greulich, C; Schildhauer, T A; Köller, M

    2013-01-01

    Nickel-Titanium shape memory alloys (NiTi-SMA) are of biomedical interest due to their unusual range of pure elastic deformability and their elastic modulus, which is closer to that of bone than any other metallic or ceramic material. Newly developed porous NiTi, produced by Selective Laser Melting (SLM), is currently under investigation as a potential carrier material for human mesenchymal stem cells (hMSC). SLM enables the production of highly complex and tailor-made implants for patients on the basis of CT data. Such implants could be used for the reconstruction of the skull, face, or pelvis. hMSC are a promising cell type for regenerative medicine and tissue engineering due to their ability to support the regeneration of critical size bone defects. Loading porous SLM-NiTi implants with autologous hMSC may enhance bone growth and healing for critical bone defects. The purpose of this study was to assess whether porous SLM-NiTi is a suitable carrier for hMSC. Specimens of varying porosity and surface structure were fabricated via SLM. hMSC were cultured for 8 days on NiTi specimens, and cell viability was analyzed using two-color fluorescence staining. Viable cells were detected on all specimens after 8 days of cell culture. Cell morphology and surface topography were analyzed by scanning electron microscopy (SEM). Cell morphology and surface topology were dependent on the orientation of the specimens during SLM production. The Nickel ion release can be reduced significantly by aligned laser processing conditions. The presented results clearly attest that both dense SLM-NiTi and porous SLM-NiTi are suitable carriers for hMSC. Nevertheless, before carrying out in vivo studies, some work on optimization of the manufacturing process and post-processing is required. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects.

    Science.gov (United States)

    Van der Stok, Johan; Van der Jagt, Olav P; Amin Yavari, Saber; De Haas, Mirthe F P; Waarsing, Jan H; Jahr, Holger; Van Lieshout, Esther M M; Patka, Peter; Verhaar, Jan A N; Zadpoor, Amir A; Weinans, Harrie

    2013-05-01

    Porous titanium scaffolds have good mechanical properties that make them an interesting bone substitute material for large bone defects. These scaffolds can be produced with selective laser melting, which has the advantage of tailoring the structure's architecture. Reducing the strut size reduces the stiffness of the structure and may have a positive effect on bone formation. Two scaffolds with struts of 120-µm (titanium-120) or 230-µm (titanium-230) were studied in a load-bearing critical femoral bone defect in rats. The defect was stabilized with an internal plate and treated with titanium-120, titanium-230, or left empty. In vivo micro-CT scans at 4, 8, and 12 weeks showed more bone in the defects treated with scaffolds. Finally, 18.4 ± 7.1 mm(3) (titanium-120, p = 0.015) and 18.7 ± 8.0 mm(3) (titanium-230, p = 0.012) of bone was formed in those defects, significantly more than in the empty defects (5.8 ± 5.1 mm(3) ). Bending tests on the excised femurs after 12 weeks showed that the fusion strength reached 62% (titanium-120) and 45% (titanium-230) of the intact contralateral femurs, but there was no significant difference between the two scaffolds. This study showed that in addition to adequate mechanical support, porous titanium scaffolds facilitate bone formation, which results in high mechanical integrity of the treated large bone defects. Copyright © 2012 Orthopaedic Research Society.

  14. Comprehensive characterization of glutamine synthetase-mediated selection for the establishment of recombinant CHO cells producing monoclonal antibodies

    DEFF Research Database (Denmark)

    Noh, Soo Min; Shin, Seunghyeon; Min Lee, Gyun

    2018-01-01

    To characterize a glutamine synthetase (GS)-based selection system, monoclonal antibody (mAb) producing recombinant CHO cell clones were generated by a single round of selection at various methionine sulfoximine (MSX) concentrations (0, 25, and 50 μM) using two different host cell lines (CHO-K1...... and GS-knockout CHO). Regardless of the host cell lines used, the clones selected at 50 μM MSX had the lowest average specific growth rate and the highest average specific production rates of toxic metabolic wastes, lactate and ammonia. Unlike CHO-K1, high producing clones could be generated...... in the absence of MSX using GS-knockout CHO with an improved selection stringency. Regardless of the host cell lines used, the clones selected at various MSX concentrations showed no significant difference in the GS, heavy chain, and light chain gene copies (P > 0.05). Furthermore, there was no correlation...

  15. Criteria determining the selection of slags for the melt decontamination of radioactively contaminated stainless steel by electroslag remelting

    International Nuclear Information System (INIS)

    Buckentin, J.M.R.; Damkroger, B.K.; Shelmidine, G.J.; Atteridge, D.G.

    1997-01-01

    Electroslag remelting is an excellent process choice for the melt decontamination of radioactively contaminated metals. ESR furnaces are easily enclosed and do not make use of refractories which could complicate thermochemical interactions between molten metal and slag. A variety of cleaning mechanisms are active during melting; radionuclides may be partitioned to the slag by means of thermochemical reaction, electrochemical reaction, or mechanical entrapment. At the completion of melting, the slag is removed from the furnace in solid form. The electroslag process as a whole is greatly affected by the chemical and physical properties of the slag used. When used as a melt decontamination scheme, the ESR process may be optimized by selection of the slag. In this research, stainless steel bars were coated with non-radioactive surrogate elements in order to simulate surface contamination. These bars were electroslag remelted using slags of various chemistries. The slags investigated were ternary mixtures of calcium fluoride, calcium oxide, and alumina. The final chemistries of the stainless steel ingots were compared with those predicted by the use of a Free Energy Minimization Modeling technique. Modeling also provided insight into the chemical mechanisms by which certain elements are captured by a slag. Slag selection was also shown to have an impact on the electrical efficiency of the process as well as the surface quality of the ingots produced

  16. Technique and Patient Selection Criteria of Right Anterior Mini-Thoracotomy for Minimal Access Aortic Valve Replacement.

    Science.gov (United States)

    Tavakoli, Reza; Leprince, Pascal; Gassmann, Max; Jamshidi, Peiman; Yamani, Nassrin; Amour, Julien; Lebreton, Guillaume

    2018-03-26

    Aortic valve stenosis has become the most prevalent valvular heart disease in developed countries, and is due to the aging of these populations. The incidence of the pathology increases with growing age after 65 years. Conventional surgical aortic valve replacement through median sternotomy has been the gold standard of patient care for symptomatic aortic valve stenosis. However, as the risk profile of patients worsens, other therapeutic strategies have been introduced in an attempt to maintain the excellent results obtained by the established surgical treatment. One of these approaches is represented by transcatheter aortic valve implantation. Although the outcomes of high-risk patients undergoing treatment for symptomatic aortic valve stenosis have improved with transcatheter aortic valve replacement, many patients with this condition remain candidates for surgical aortic valve replacement. In order to reduce the surgical trauma in patients who are candidates for surgical aortic valve replacement, minimally invasive approaches have garnered interest during the past decade. Since the introduction of right anterior thoracotomy for aortic valve replacement in 1993, right anterior mini-thoracotomy and upper hemi-sternotomy have become the predominant incisional approaches among cardiac surgeons performing minimal access aortic valve replacement. Beside the location of the incision, the arterial cannulation site represents the second major landmark of minimal access techniques for aortic valve replacement. The two most frequently used arterial cannulation sites include central aortic and peripheral femoral approaches. With the purpose of reducing surgical trauma in these patients, we have opted for a right anterior mini-thoracotomy approach with a central aortic cannulation site. This protocol describes in detail a technique for minimally invasive aortic valve replacement and provides recommendations for patient selection criteria, including cardiac computer

  17. Platelet-rich preparations to improve healing. Part II: platelet activation and enrichment, leukocyte inclusion, and other selection criteria.

    Science.gov (United States)

    Davis, Vicki L; Abukabda, Alaeddin B; Radio, Nicholas M; Witt-Enderby, Paula A; Clafshenkel, William P; Cairone, J Vito; Rutkowski, James L

    2014-08-01

    Multiple platelet-rich preparations have been reported to improve wound and bone healing, such as platelet-rich plasma (PRP) and platelet rich fibrin (PRF). The different methods employed during their preparation are important, as they influence the quality of the product applied to a wound or surgical site. Besides the general protocol for preparing the platelet-rich product (discussed in Part 1 of this review), multiple choices need to be considered during its preparation. For example, activation of the platelets is required for the release and enmeshment of growth factors, but the method of activation may influence the resulting matrix, growth factor availability, and healing. Additionally, some methods enrich leukocytes as well as platelets, but others are designed to be leukocyte-poor. Leukocytes have many important roles in healing and their inclusion in PRP results in increased platelet concentrations. Platelet and growth factor enrichment reported for the different types of platelet-rich preparations are also compared. Generally, TGF-β1 and PDGF levels were higher in preparations that contain leukocytes compared to leukocyte-poor PRP. However, platelet concentration may be the most reliable criterion for comparing different preparations. These and other criteria are described to help guide dental and medical professionals, in large and small practices, in selecting the best procedures for their patients. The healing benefits of platelet-rich preparations along with the low risk and availability of simple preparation procedures should encourage more clinicians to incorporate platelet-rich products in their practice to accelerate healing, reduce adverse events, and improve patient outcomes.

  18. The Establishment of Object Selection Criteria for Effect Analysis of Electromagnetic Pulse (EMP) in Operating Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Ye, Song Hae; Ryu, Hosun; Kim, Minyi; Lee, Euijong [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    The electromagnetic pulse (EMP) can be used as a strategic weapon by inducing damaging voltage and currents that the electrical circuits are not designed to withstand. EMPs are lethal to electronic systems. All EMP events have three common components: a source, coupling path, and receptor. It can also travel across power grids, destroying electronics as it passes in less than a second. There have been no research studies on the effect analysis for EMP in domestic nuclear power plants and power grids. To ensure the safety of operating nuclear power plants in this environment, the emission of EMP is needed for the effect analysis and safety measures against EMPs. Actually, it is difficult and inefficient to conduct the effect analysis of EMP with all the equipment and systems in nuclear power plants (NPPs). Therefore, this paper presents the results of establishing the object selection criteria for the effect analysis of EMP in operating nuclear power plants through reviewing previous research in the US and the safety related design concepts in domestic NPPs. It is not necessary to ensure the continued operation of the plant in intense multiple EMP environments. The most probable effect of EMP on a modern nuclear power plant is an unscheduled shutdown. EMP may also cause an extended shutdown by the unnecessary activation of some safety related systems. In general, EMP can be considered a nuisance to nuclear plants, but it is not considered a serious threat to plant safety. The results of EMP effect analysis show less possibility of failure in the tested individual equipment. It was also confirmed that there is no possibility of simultaneous failure for devices in charge of the safety shutdown in the NPP.

  19. The life cycle cost of a building from the point of view of environmental criteria of selecting the most beneficial offer in the area of competitive tendering

    Directory of Open Access Journals (Sweden)

    Grzyl Beata

    2017-01-01

    Full Text Available The article analyses environmental and ecological criteria of selecting the most beneficial offer in the aspect of LCC. Construction works contracts and the potential method of defining the above criteria, among others, is pondered on (for example by the recommendation of a material, which is supposed to be used, a ban on substances that are harmful for human health as well for the environment. In the relation to the above, it is necessary to define technical parameters that have an impact on the environment, for example the level of pollution and noise emission, electricity and water consumption, or stating the minimal involvement of a processed ingredient. In addition the article presents also an account of the life cycle cost of a building from the point of view of environmental criteria constituting an element of selecting the most beneficial offer in the area of competitive tendering.

  20. Assessment of Non-Financial Criteria in the Selection of Investment Projects for Seed Capital Funding: the Contribution of Scientometrics and Patentometrics

    Directory of Open Access Journals (Sweden)

    Gustavo da Silva Motta

    2012-09-01

    Full Text Available The aim of this article is to assess the potential of using scientometric and patentometric indicators as a way of instrumentalizing the selection process of projects for seed capital funding. There is an increasing interest in technology based enterprises for their capacity to contribute to economic and social development, but there is also some difficulty in assessing non-financial criteria associated with technology for the purposes of financial funding. Thus, this research selected the case of the first enterprise invested in by the largest seed capital fund in Brazil, in order to create scientific and technological indicators and to assess the extent to which these indicators may contribute to understanding the market potential of the technology once it is assessed. It was concluded that scientometric and patentometric indicators favour the assessment process for non-financial criteria, in particular those criteria dealt with in this study: technology, market, divestment, and team.

  1. A criticism of applications with multi-criteria decision analysis that are used for the site selection for the disposal of municipal solid wastes

    International Nuclear Information System (INIS)

    Kemal Korucu, M.; Erdagi, Bora

    2012-01-01

    Highlights: ► The existing structure of the multi-criteria decision analysis for site selection is criticized. ► Fundamental problematic points based on the critics are defined. ► Some modifications are suggested in order to provide solutions to these problematical points. ► A new structure for the decision making mechanism is proposed. ► The feasibility of the new method is subjected to an evaluation process. - Abstract: The main aim of this study is to criticize the process of selecting the most appropriate site for the disposal of municipal solid wastes which is one of the problematic issues of waste management operations. These kinds of problems are pathological symptoms of existing problematical human–nature relationship which is related to the syndrome called ecological crisis. In this regard, solving the site selection problem, which is just a small part of a larger entity, for the good of ecological rationality and social justice is only possible by founding a new and extensive type of human–nature relationship. In this study, as a problematic point regarding the discussions on ecological problems, the existing structure of the applications using multi-criteria decision analysis in the process of site selection with three main criteria is criticized. Based on this critique, fundamental problematic points (to which applications are insufficient to find solutions) will be defined. Later, some modifications will be suggested in order to provide solutions to these problematical points. Finally, the criticism addressed to the structure of the method with three main criteria and the feasibility of the new method with four main criteria is subjected to an evaluation process. As a result, it is emphasized that the new structure with four main criteria may be effective in solution of the fundamental problematic points.

  2. A criticism of applications with multi-criteria decision analysis that are used for the site selection for the disposal of municipal solid wastes

    Energy Technology Data Exchange (ETDEWEB)

    Kemal Korucu, M., E-mail: kemal.korucu@kocaeli.edu.tr [University of Kocaeli, Department of Environmental Engineering, 41380 Kocaeli (Turkey); Erdagi, Bora [University of Kocaeli, Department of Philosophy, 41380 Kocaeli (Turkey)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer The existing structure of the multi-criteria decision analysis for site selection is criticized. Black-Right-Pointing-Pointer Fundamental problematic points based on the critics are defined. Black-Right-Pointing-Pointer Some modifications are suggested in order to provide solutions to these problematical points. Black-Right-Pointing-Pointer A new structure for the decision making mechanism is proposed. Black-Right-Pointing-Pointer The feasibility of the new method is subjected to an evaluation process. - Abstract: The main aim of this study is to criticize the process of selecting the most appropriate site for the disposal of municipal solid wastes which is one of the problematic issues of waste management operations. These kinds of problems are pathological symptoms of existing problematical human-nature relationship which is related to the syndrome called ecological crisis. In this regard, solving the site selection problem, which is just a small part of a larger entity, for the good of ecological rationality and social justice is only possible by founding a new and extensive type of human-nature relationship. In this study, as a problematic point regarding the discussions on ecological problems, the existing structure of the applications using multi-criteria decision analysis in the process of site selection with three main criteria is criticized. Based on this critique, fundamental problematic points (to which applications are insufficient to find solutions) will be defined. Later, some modifications will be suggested in order to provide solutions to these problematical points. Finally, the criticism addressed to the structure of the method with three main criteria and the feasibility of the new method with four main criteria is subjected to an evaluation process. As a result, it is emphasized that the new structure with four main criteria may be effective in solution of the fundamental problematic points.

  3. Inclusions, Porosity, and Fatigue of AlSi10Mg Parts Produced by Selective Laser Melting

    Science.gov (United States)

    Tang, Ming

    Additive manufacturing (AM) has experienced remarkable growth in the past decade with applications in both rapid prototyping and rapid manufacturing for functional end-usable parts. As one of the most promising AM processes, selective laser melting (SLM) can be used to fabricate metal products line by line and layer upon layer within a powder bed system. Such process allows the building of parts with customized shapes, which brings higher design flexibility than traditional casting and wrought manufacturing. In this work, AlSi10Mg powder is chosen as the raw material for producing parts by SLM, since aluminum alloys are widely used in automotive and aerospace industries thanks to an excellent combination of low density and competitive mechanical properties. However, there remain multiple drawbacks which limit further applications of aluminum parts produced by SLM: lack of prediction of solidification microstructure, few studies on fatigue properties, and cost and time caused by the limited production rate. All these issues were studied in this work and summarized as follows: Rapid movement of the melt pool (at a speed around 1 m/s) in SLM of metal powder directly implies rapid solidification. In this research, the length scale of the as-built microstructure of parts built with the alloy AlSi10Mg was measured and compared with the well-known relationship between cell size and cooling rate. Cooling rates during solidification were estimated using the Rosenthal equation. It was found that the solidification structure is the expected cellular combination of silicon with alpha-aluminum. The dependence of the measured cell spacing on the calculated cooling rate follows the well-established relationship for aluminum alloys. The implication is that cell spacing can be manipulated by changing the heat input. Microscopy of polished sections through particles of the metal powder used to build the parts showed that the particles have a dendritic-eutectic structure; the

  4. Variance-Based Cluster Selection Criteria in a K-Means Framework for One-Mode Dissimilarity Data.

    Science.gov (United States)

    Vera, J Fernando; Macías, Rodrigo

    2017-06-01

    One of the main problems in cluster analysis is that of determining the number of groups in the data. In general, the approach taken depends on the cluster method used. For K-means, some of the most widely employed criteria are formulated in terms of the decomposition of the total point scatter, regarding a two-mode data set of N points in p dimensions, which are optimally arranged into K classes. This paper addresses the formulation of criteria to determine the number of clusters, in the general situation in which the available information for clustering is a one-mode [Formula: see text] dissimilarity matrix describing the objects. In this framework, p and the coordinates of points are usually unknown, and the application of criteria originally formulated for two-mode data sets is dependent on their possible reformulation in the one-mode situation. The decomposition of the variability of the clustered objects is proposed in terms of the corresponding block-shaped partition of the dissimilarity matrix. Within-block and between-block dispersion values for the partitioned dissimilarity matrix are derived, and variance-based criteria are subsequently formulated in order to determine the number of groups in the data. A Monte Carlo experiment was carried out to study the performance of the proposed criteria. For simulated clustered points in p dimensions, greater efficiency in recovering the number of clusters is obtained when the criteria are calculated from the related Euclidean distances instead of the known two-mode data set, in general, for unequal-sized clusters and for low dimensionality situations. For simulated dissimilarity data sets, the proposed criteria always outperform the results obtained when these criteria are calculated from their original formulation, using dissimilarities instead of distances.

  5. Growth, Morphology and Growth Related Hormone Level in Kappaphycus alvarezii Produced by Mass Selection in Gorontalo Waters, Indonesia

    Directory of Open Access Journals (Sweden)

    Siti Fadilah

    2016-01-01

    Full Text Available The use of high quality seed can support the success of the seaweed cultivation. This study was conducted to evaluate the growth performance, morphology and growth related hormone level of brown strain seaweed Kappaphycus alvarezii seed produced by mass selection. Selection was performed in the Tomini Gulf, Gorontalo, based on mass selection of seaweed seed protocol with a slight modification in cut-off 10% of the highest daily growth rate. Selection was carried out for four generations. The selected 4th generation of seed was then used in cultivation performance test in the Celebes Sea, North Gorontalo, for three production cycles. The results showed that the selected K. alvarezii has higher clump weight and daily growth rate, longer thallus, more number of branches, and shorter internodes compared to the unselected control and seaweed from the farmer as external control. Furthermore, total sugar content, levels of kinetin hormone and kinetin:indole-3-acetic acid ratio were higher in selected seaweeds than that of unselected control and external control. Thus, mass selection method could be used to produce high growth of seed, and kinetin and indole-3-acetic acid play an important role in growth of K. alvarezii.

  6. Selective cultures for the isolation of biosurfactant producing bacteria: comparison of different combinations of environmental inocula and hydrophobic carbon sources.

    Science.gov (United States)

    Domingues, Patrícia M; Louvado, António; Oliveira, Vanessa; Coelho, Francisco J C R; Almeida, Adelaide; Gomes, Newton C M; Cunha, Angela

    2013-01-01

    The potential of estuarine microniches as reservoirs of biosurfactant-producing bacteria was evaluated by testing different combinations of inocula and hydrophobic carbon sources. Selective cultures using diesel, petroleum, or paraffin as hydrophobic carbon sources were prepared and inoculated with water from the surface microlayer, bulk sediments, and sediment of the rhizosphere of Halimione portulacoides. These inocula were compared regarding the frequency of biosurfactant-producing strains among selected isolates. The community structure of the selective cultures was profiled using denaturing gradient gel electrophoresis (DGGE) of the 16S rRNA gene fragments at the end of the incubation. The DGGE profiles corresponding to the communities established in selective cultures at the end of the incubation revealed that communities were different in terms of structural diversity. The highest diversity was observed in the selective cultures containing paraffin (H (') = 2.5). Isolates were obtained from the selective cultures (66) and tested for biosurfactant production by the atomized oil assay. Biosurfactant production was detected in 17 isolates identified as Microbacterium, Pseudomonas, Rhodococcus, and Serratia. The combination of estuarine surface microlayer (SML) water as inoculum and diesel as carbon source seems promising for the isolation of surfactant-producing bacteria. Supplemental materials are available for this article. Go to the publisher's online edition of Preparative Biochemistry and Biotechnology to view the supplemental file.

  7. Comprehensive characterization of glutamine synthetase-mediated selection for the establishment of recombinant CHO cells producing monoclonal antibodies.

    Science.gov (United States)

    Noh, Soo Min; Shin, Seunghyeon; Lee, Gyun Min

    2018-03-29

    To characterize a glutamine synthetase (GS)-based selection system, monoclonal antibody (mAb) producing recombinant CHO cell clones were generated by a single round of selection at various methionine sulfoximine (MSX) concentrations (0, 25, and 50 μM) using two different host cell lines (CHO-K1 and GS-knockout CHO). Regardless of the host cell lines used, the clones selected at 50 μM MSX had the lowest average specific growth rate and the highest average specific production rates of toxic metabolic wastes, lactate and ammonia. Unlike CHO-K1, high producing clones could be generated in the absence of MSX using GS-knockout CHO with an improved selection stringency. Regardless of the host cell lines used, the clones selected at various MSX concentrations showed no significant difference in the GS, heavy chain, and light chain gene copies (P > 0.05). Furthermore, there was no correlation between the specific mAb productivity and these three gene copies (R 2  ≤ 0.012). Taken together, GS-mediated gene amplification does not occur in a single round of selection at a MSX concentration up to 50 μM. The use of the GS-knockout CHO host cell line facilitates the rapid generation of high producing clones with reduced production of lactate and ammonia in the absence of MSX.

  8. A Novel Approach to Site Selection: Collaborative Multi-Criteria Decision Making through Geo-Social Network (Case Study: Public Parking

    Directory of Open Access Journals (Sweden)

    Zeinab Neisani Samani

    2018-03-01

    Full Text Available There are many potential factors that are involved in the decision making process of site selection, which makes it a challenging issue. This paper addresses the collaborative decision making concept through a geo-social network to predict site selection for public parking in Tehran, Iran. The presented approach utilized the analytic hierarchy process (AHP as a multi-criteria decision method (MCDM for weighting the criteria, which was completed in two stages; once by 50 experts, and then by three different levels of users, including 50 experts, 25 urban managers, and 150 pubic citizens, with respect to the case study area. The fuzzy majority method aggregates the archived results of AHP to determine the preferred locations that are suitable for public parking. The proposed method was implemented using a telegram bot platform. Two main advantages of the collaborative decision making scenario for public urban site selection are the fair distribution of the selected locations and the high satisfaction of users, which increased from 65% to 85%. This study presents an application for site selection based on multi-criteria decision making in a geo-social network context.

  9. Benchmarking whole-building energy performance with multi-criteria technique for order preference by similarity to ideal solution using a selective objective-weighting approach

    International Nuclear Information System (INIS)

    Wang, Endong

    2015-01-01

    Highlights: • A TOPSIS based multi-criteria whole-building energy benchmarking is developed. • A selective objective-weighting procedure is used for a cost-accuracy tradeoff. • Results from a real case validated the benefits of the presented approach. - Abstract: This paper develops a robust multi-criteria Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) based building energy efficiency benchmarking approach. The approach is explicitly selective to address multicollinearity trap due to the subjectivity in selecting energy variables by considering cost-accuracy trade-off. It objectively weights the relative importance of individual pertinent efficiency measuring criteria using either multiple linear regression or principal component analysis contingent on meta data quality. Through this approach, building energy performance is comprehensively evaluated and optimized. Simultaneously, the significant challenges associated with conventional single-criterion benchmarking models can be avoided. Together with a clustering algorithm on a three-year panel dataset, the benchmarking case of 324 single-family dwellings demonstrated an improved robustness of the presented multi-criteria benchmarking approach over the conventional single-criterion ones

  10. An Exploratory Analysis for the Selection and Implementation of Advanced Manufacturing Technology by Fuzzy Multi-criteria Decision Making Methods: A Comparative Study

    Science.gov (United States)

    Nath, Surajit; Sarkar, Bijan

    2017-08-01

    Advanced Manufacturing Technologies (AMTs) offer opportunities for the manufacturing organizations to excel their competitiveness and in turn their effectiveness in manufacturing. Proper selection and evaluation of AMTs is the most significant task in today's modern world. But this involves a lot of uncertainty and vagueness as it requires many conflicting criteria to deal with. So the task of selection and evaluation of AMTs becomes very tedious for the evaluators as they are not able to provide crisp data for the criteria. Different Fuzzy Multi-criteria Decision Making (MCDM) methods help greatly in dealing with this problem. This paper focuses on the application of two very much potential Fuzzy MCDM methods namely COPRAS-G, EVAMIX and a comparative study between them on some rarely mentioned criteria. Each of the two methods is very powerful evaluation tool and has beauty in its own. Although, performance wise these two methods are almost at same level, but, the approach of each one of them are quite unique. This uniqueness is revealed by introducing a numerical example of selection of AMT.

  11. Fatigue crack growth behavior of Inconel 718 produced by selective laser melting

    Czech Academy of Sciences Publication Activity Database

    Konečná, R.; Kunz, Ludvík; Nicoletto, G.; Bača, A.

    2016-01-01

    Roč. 35, č. 10 (2016), s. 31-40 ISSN 1971-8993 Institutional support: RVO:68081723 Keywords : Inconel 718 * Selective laser melting * Microstructure * Fatigue crack growth * Fractography Subject RIV: JL - Materials Fatigue, Friction Mechanics

  12. Selective Laser Melting Produced Ti-6Al-4V: Post-Process Heat Treatments to Achieve Superior Tensile Properties

    Directory of Open Access Journals (Sweden)

    Gerrit M. Ter Haar

    2018-01-01

    Full Text Available Current post-process heat treatments applied to selective laser melting produced Ti-6Al-4V do not achieve the same microstructure and therefore superior tensile behaviour of thermomechanical processed wrought Ti-6Al-4V. Due to the growing demand for selective laser melting produced parts in industry, research and development towards improved mechanical properties is ongoing. This study is aimed at developing post-process annealing strategies to improve tensile behaviour of selective laser melting produced Ti-6Al-4V parts. Optical and electron microscopy was used to study α grain morphology as a function of annealing temperature, hold time and cooling rate. Quasi-static uniaxial tensile tests were used to measure tensile behaviour of different annealed parts. It was found that elongated α’/α grains can be fragmented into equiaxial grains through applying a high temperature annealing strategy. It is shown that bi-modal microstructures achieve a superior tensile ductility to current heat treated selective laser melting produced Ti-6Al-4V samples.

  13. Selective Laser Melting Produced Ti-6Al-4V: Post-Process Heat Treatments to Achieve Superior Tensile Properties.

    Science.gov (United States)

    Ter Haar, Gerrit M; Becker, Thorsten H

    2018-01-17

    Current post-process heat treatments applied to selective laser melting produced Ti-6Al-4V do not achieve the same microstructure and therefore superior tensile behaviour of thermomechanical processed wrought Ti-6Al-4V. Due to the growing demand for selective laser melting produced parts in industry, research and development towards improved mechanical properties is ongoing. This study is aimed at developing post-process annealing strategies to improve tensile behaviour of selective laser melting produced Ti-6Al-4V parts. Optical and electron microscopy was used to study α grain morphology as a function of annealing temperature, hold time and cooling rate. Quasi-static uniaxial tensile tests were used to measure tensile behaviour of different annealed parts. It was found that elongated α'/α grains can be fragmented into equiaxial grains through applying a high temperature annealing strategy. It is shown that bi-modal microstructures achieve a superior tensile ductility to current heat treated selective laser melting produced Ti-6Al-4V samples.

  14. The ATLAS3D project - I. A volume-limited sample of 260 nearby early-type galaxies: science goals and selection criteria

    Science.gov (United States)

    Cappellari, Michele; Emsellem, Eric; Krajnović, Davor; McDermid, Richard M.; Scott, Nicholas; Verdoes Kleijn, G. A.; Young, Lisa M.; Alatalo, Katherine; Bacon, R.; Blitz, Leo; Bois, Maxime; Bournaud, Frédéric; Bureau, M.; Davies, Roger L.; Davis, Timothy A.; de Zeeuw, P. T.; Duc, Pierre-Alain; Khochfar, Sadegh; Kuntschner, Harald; Lablanche, Pierre-Yves; Morganti, Raffaella; Naab, Thorsten; Oosterloo, Tom; Sarzi, Marc; Serra, Paolo; Weijmans, Anne-Marie

    2011-05-01

    The ATLAS3D project is a multiwavelength survey combined with a theoretical modelling effort. The observations span from the radio to the millimetre and optical, and provide multicolour imaging, two-dimensional kinematics of the atomic (H I), molecular (CO) and ionized gas (Hβ, [O III] and [N I]), together with the kinematics and population of the stars (Hβ, Fe5015 and Mg b), for a carefully selected, volume-limited (1.16 × 105 Mpc3) sample of 260 early-type (elliptical E and lenticular S0) galaxies (ETGs). The models include semi-analytic, N-body binary mergers and cosmological simulations of galaxy formation. Here we present the science goals for the project and introduce the galaxy sample and the selection criteria. The sample consists of nearby (D 15°) morphologically selected ETGs extracted from a parent sample of 871 galaxies (8 per cent E, 22 per cent S0 and 70 per cent spirals) brighter than MK statistically representative of the nearby galaxy population. We present the size-luminosity relation for the spirals and ETGs and show that the ETGs in the ATLAS3D sample define a tight red sequence in a colour-magnitude diagram, with few objects in the transition from the blue cloud. We describe the strategy of the SAURON integral field observations and the extraction of the stellar kinematics with the pPXF method. We find typical 1σ errors of ΔV≈ 6 km s-1, Δσ≈ 7 km s-1, Δh3≈Δh4≈ 0.03 in the mean velocity, the velocity dispersion and Gauss-Hermite (GH) moments for galaxies with effective dispersion σe≳ 120 km s-1. For galaxies with lower σe (≈40 per cent of the sample) the GH moments are gradually penalized by pPXF towards zero to suppress the noise produced by the spectral undersampling and only V and σ can be measured. We give an overview of the characteristics of the other main data sets already available for our sample and of the ongoing modelling projects.

  15. Cadmium and lead in vegetable and fruit produce selected from specific regional areas of the UK

    International Nuclear Information System (INIS)

    Norton, Gareth J.; Deacon, Claire M.; Mestrot, Adrien; Feldmann, Joerg; Jenkins, Paul; Baskaran, Christina; Meharg, Andrew A.

    2015-01-01

    Cadmium and lead were determined in fruit and vegetable produce (~ 1300 samples) collected from a field and market basket study of locally grown produce from the South-West of Britain (Devon and Cornwall). These were compared with similarly locally grown produce from the North-East of Britain (Aberdeenshire). The concentrations of cadmium and lead in the market basket produce were compared to the maximum levels (ML) set by the European Union (EU). For cadmium 0.2% of the samples exceeded the ML, and 0.6% of the samples exceeded the ML for lead. The location of cadmium and lead in potatoes was performed using laser ablation ICP-MS. All tested samples exhibited higher lead concentrations, and most exhibited increased concentrations of cadmium in the potato skin compared to the flesh. The concentrations of cadmium and lead found in fruits and vegetables sampled during this study do not increase concern about risk to human health. - Highlights: • Cadmium and lead concentrations determined in fruit and vegetable produce • 0.2% of the samples exceeded guideline values for cadmium. • 0.6% of the samples exceeded guideline values for lead. • Higher concentrations of cadmium and lead were found in the skins of potatoes

  16. Cadmium and lead in vegetable and fruit produce selected from specific regional areas of the UK

    Energy Technology Data Exchange (ETDEWEB)

    Norton, Gareth J., E-mail: g.norton@abdn.ac.uk [School of Biological and Environmental Sciences, University of Aberdeen, Cruickshank Building, St Machar Drive, Aberdeen AB24 3UU (United Kingdom); Deacon, Claire M. [School of Biological and Environmental Sciences, University of Aberdeen, Cruickshank Building, St Machar Drive, Aberdeen AB24 3UU (United Kingdom); Mestrot, Adrien [Soil Science Group, Institute of Geography, Universität Bern, Hallerstrasse 12, 3012 Bern (Switzerland); Feldmann, Joerg [Department of Chemistry, School of Physical Sciences, University of Aberdeen, Meston Building, AB24 3UE (United Kingdom); Jenkins, Paul; Baskaran, Christina [Food Standards Agency, Aviation House, Kingsway, London WC2B 6NH (United Kingdom); Meharg, Andrew A. [Institute for Global Food Security, Queen' s University Belfast, David Keir Building, Malone Road, Belfast BT9 5BN (United Kingdom)

    2015-11-15

    Cadmium and lead were determined in fruit and vegetable produce (~ 1300 samples) collected from a field and market basket study of locally grown produce from the South-West of Britain (Devon and Cornwall). These were compared with similarly locally grown produce from the North-East of Britain (Aberdeenshire). The concentrations of cadmium and lead in the market basket produce were compared to the maximum levels (ML) set by the European Union (EU). For cadmium 0.2% of the samples exceeded the ML, and 0.6% of the samples exceeded the ML for lead. The location of cadmium and lead in potatoes was performed using laser ablation ICP-MS. All tested samples exhibited higher lead concentrations, and most exhibited increased concentrations of cadmium in the potato skin compared to the flesh. The concentrations of cadmium and lead found in fruits and vegetables sampled during this study do not increase concern about risk to human health. - Highlights: • Cadmium and lead concentrations determined in fruit and vegetable produce • 0.2% of the samples exceeded guideline values for cadmium. • 0.6% of the samples exceeded guideline values for lead. • Higher concentrations of cadmium and lead were found in the skins of potatoes.

  17. Criteria for selection of target materials and design of high-efficiency-release targets for radioactive ion beam generation

    CERN Document Server

    Alton, G D; Liu, Y

    1999-01-01

    In this report, we define criteria for choosing target materials and for designing, mechanically stable, short-diffusion-length, highly permeable targets for generation of high-intensity radioactive ion beams (RIBs) for use at nuclear physics and astrophysics research facilities based on the ISOL principle. In addition, lists of refractory target materials are provided and examples are given of a number of successful targets, based on these criteria, that have been fabricated and tested for use at the Holifield Radioactive Ion Beam Facility (HRIBF).

  18. Volatile compounds in samples of cork and also produced by selected fungi.

    Science.gov (United States)

    Barreto, M C; Vilas Boas, L; Carneiro, L C; San Romão, M V

    2011-06-22

    The production of volatile compounds by microbial communities of cork samples taken during the cork manufacturing process was investigated. The majority of volatiles were found in samples collected at two stages: resting after the first boiling and nontreated cork disks. Volatile profiles produced by microbiota in both stages are similar. The releasable volatile compounds and 2,4,6-trichloroanisole (TCA) produced in cork-based culture medium by five isolated fungal species in pure and mixed cultures were also analyzed by gas chromatography coupled with mass spectrometry (GC-MS).The results showed that 1-octen-3-ol and esters of fatty acids (medium chain length C8-C20) were the main volatile compounds produced by either pure fungal species or their mixture. Apparently, Penicillium glabrum is the main contributor to the overall volatile composition observed in the mixed culture. The production of releasable TCA on cork cannot be attributed to any of the assayed fungal isolates.

  19. Adaptive evolution in locomotor performance: How selective pressures and functional relationships produce diversity.

    Science.gov (United States)

    Scales, Jeffrey A; Butler, Marguerite A

    2016-01-01

    Despite the complexity of nature, most comparative studies of phenotypic evolution consider selective pressures in isolation. When competing pressures operate on the same system, it is commonly expected that trade-offs will occur that will limit the evolution of phenotypic diversity, however, it is possible that interactions among selective pressures may promote diversity instead. We explored the evolution of locomotor performance in lizards in relation to possible selective pressures using the Ornstein-Uhlenbeck process. Here, we show that a combination of selection based on foraging mode and predator escape is required to explain variation in performance phenotypes. Surprisingly, habitat use contributed little explanatory power. We find that it is possible to evolve very different abilities in performance which were previously thought to be tightly correlated, supporting a growing literature that explores the many-to-one mapping of morphological design. Although we generally find the expected trade-off between maximal exertion and speed, this relationship surprisingly disappears when species experience selection for both performance types. We conclude that functional integration need not limit adaptive potential, and that an integrative approach considering multiple major influences on a phenotype allows a more complete understanding of adaptation and the evolution of diversity. © 2015 The Author(s). Evolution © 2015 The Society for the Study of Evolution.

  20. Limits of principal components analysis for producing a common trait space: implications for inferring selection, contingency, and chance in evolution.

    Directory of Open Access Journals (Sweden)

    Kevin J Parsons

    2009-11-01

    Full Text Available Comparing patterns of divergence among separate lineages or groups has posed an especially difficult challenge for biologists. Recently a new, conceptually simple methodology called the "ordered-axis plot" approach was introduced for the purpose of comparing patterns of diversity in a common morphospace. This technique involves a combination of principal components analysis (PCA and linear regression. Given the common use of these statistics the potential for the widespread use of the ordered axis approach is high. However, there are a number of drawbacks to this approach, most notably that lineages with the greatest amount of variance will largely bias interpretations from analyses involving a common morphospace. Therefore, without meeting a set of a priori requirements regarding data structure the ordered-axis plot approach will likely produce misleading results.Morphological data sets from cichlid fishes endemic to Lakes Tanganyika, Malawi, and Victoria were used to statistically demonstrate how separate groups can have differing contributions to a common morphospace produced by a PCA. Through a matrix superimposition of eigenvectors (scale-free trajectories of variation identified by PCA we show that some groups contribute more to the trajectories of variation identified in a common morphospace. Furthermore, through a set of randomization tests we show that a common morphospace model partitions variation differently than group-specific models. Finally, we demonstrate how these limitations may influence an ordered-axis plot approach by performing a comparison on data sets with known alterations in covariance structure. Using these results we provide a set of criteria that must be met before a common morphospace can be reliably used.Our results suggest that a common morphospace produced by PCA would not be useful for producing biologically meaningful results unless a restrictive set of criteria are met. We therefore suggest biologists be aware

  1. Selection of daunorubicin-producing strain S. Coeruleorubidus by plasma radiation technology

    International Nuclear Information System (INIS)

    Jiang Shichun; Wu Jianping; Bai Hua

    2001-01-01

    The authors reported the results of mutagenesis by nitrogen plasma radiation with energy from 65 to 80 keV and dose from 9.6 x 10 9 to 1.5 x 10 11 /cm 2 in antineoplastic antibiotics daunorubicin-producing S. Coeruleorubidus. The relationship between death rate and radiation dose was formulated by computer and the formula. It was fit to a biological single-hit curve. The obtained high-producing mutagenic strain 137 was tested for its production property. The result showed that it could increase the daunorubicin potency by 25.8% in productive tanks of fermentation

  2. Testing some of Benjamin Graham’s Stock Selection Criteria: A Case of the FTSE Bursa Malaysia EMAS Index from Year 2000 to 2009

    Directory of Open Access Journals (Sweden)

    Desmond Chang

    2011-01-01

    Full Text Available Benjamin Graham, also known as the “father of value investing” proposed that investment in the stock exchange can be a safe endeavor while receiving gains that outperform the market if the investor makes carefully thought out purchases. This study aims to determine if the use of some of Benjamin Graham’s stock selection criteria is able to generate returns that are significantly greater than the returns in the stock exchange of Malaysia, particularly, the comprehensive FTSE Bursa Malaysia EMAS Index. This study collected secondary data regarding fundamentals of companies listed in the FTSE Bursa Malaysia EMAS Index from the year 2000 to 2009. Five criteria were set up in this research based on one or a combination of price-to-earnings ratio, price-to-book value, current ratio and dividend yield. The listed companies were screened using those criteria. An equally weighted portfolio was created using the screened companies and their one-year and two-year returns calculated. The returns were compared to the market return. Hypotheses of this research were tested using t-test statistic to determine the significance of the data. This research found that most of the screening criteria used generated returns that were higher than the market return in almost every year they were tested in. Benjamin Graham’s stock selection criteria although have been conceived over 80 years ago is still applicable today in the Malaysian market. Further research can be conducted with different criteria with varying holding periods and in different markets.

  3. Production facility site selection factors for Texas value-added wood producers

    Science.gov (United States)

    Judd H. Michael; Joanna Teitel; James E. Granskog

    1998-01-01

    Value-added wood products manufacturers serve an important role in the economies of many U.S. regions and are therefore sought after by entities such as economic development agencies. The reasons why certain locations for a prospective prodution facility would be more attractive to secondary wood industry producers are not clearly understood. Therefore, this research...

  4. Selecting the Acceptance Criteria of Medicines in the Reimbursement List of Public Health Insurance of Iran, Using the "Borda" Method: a Pilot Study.

    Science.gov (United States)

    Viyanchi, Amir; Rasekh, Hamid Reza; Rajabzadeh Ghatari, Ali; SafiKhani, Hamid Reza

    2015-01-01

    Decision-making for medicines to be accepted in Iran's public health insurance reimbursement list is a complex process and involves factors, which should be considered in applying a coverage for medicine costs. These processes and factors are not wholly assessed, while assessment of these factors is an essential need for getting a transparent and evidence-based approach toward medicine reimbursement in Iran. This paper aims to show an evidence-based approach toward medicine selection criteria to inform the medical reimbursement decision makers in Iranian health insurance organizations. To explore an adaptable decision-making framework while incorporating a method called "Borda" in medicine reimbursement assessment, we used the help of an expert group including decision makers and clinical researchers who are also policy makers to appraise the five chief criteria that have three sub criteria (Precision, Interpretability, and Cost). Also software "Math-lab"7, "SPSS" 17 and Excel 2007 were used in this study. "Borda" estimates the amount of perceived values from different criteria and creates a range from one to five while providing a comprehensive measurement of a large spectrum of criteria. Participants reported that the framework provided an efficient approach to systematic consideration in a pragmatic format consisting of many parts to guide decision-makings, including criteria and value (a model with the core of Borda) and evidences (medicine reimbursement based on criteria). The most important criterion for medicine acceptance in health insurance companies, in Iran, is the "life-threatening" factor and "evidence quality" is accounted as the fifth important factor. This pilot study showed the usefulness of incorporating Borda in medicine reimbursement decisions to support a transparent and systematic appraisal of health insurance companies' deeds. Further research is needed to advance Borda-based approaches that are effective on health insurance decision making.

  5. Long fatigue crack growth in Inconel 718 produced by selective laser melting

    Czech Academy of Sciences Publication Activity Database

    Konečná, R.; Kunz, Ludvík; Nicoletto, G.; Bača, A.

    2016-01-01

    Roč. 92, NOV (2016), s. 499-506 ISSN 0142-1123. [CP 2015 - International Conference on Crack Paths /5./. Ferrara, 16.09.2015-18.09.2015] Institutional support: RVO:68081723 Keywords : Inconel 718 * Selective laser melting * Microstructure * Fatigue crack growth * Fractography Subject RIV: JL - Materials Fatigue, Friction Mechanics Impact factor: 2.899, year: 2016

  6. Exploiting translational coupling for the selection of cells producing toxic recombinant proteins from expression vectors.

    Science.gov (United States)

    Tagliavia, Marcello; Cuttitta, Angela

    2016-01-01

    High rates of plasmid instability are associated with the use of some expression vectors in Escherichia coli, resulting in the loss of recombinant protein expression. This is due to sequence alterations in vector promoter elements caused by the background expression of the cloned gene, which leads to the selection of fast-growing, plasmid-containing cells that do not express the target protein. This phenomenon, which is worsened when expressing toxic proteins, results in preparations containing very little or no recombinant protein, or even in clone loss; however, no methods to prevent loss of recombinant protein expression are currently available. We have exploited the phenomenon of translational coupling, a mechanism of prokaryotic gene expression regulation, in order to select cells containing plasmids still able to express recombinant proteins. Here we designed an expression vector in which the cloned gene and selection marker are co-expressed. Our approach allowed for the selection of the recombinant protein-expressing cells and proved effective even for clones encoding toxic proteins.

  7. Criteria for the Evaluation and Selection of Radiation-Induced Metabolic Changes as Biochemical Indicators of Radiation Damage

    Energy Technology Data Exchange (ETDEWEB)

    Altman, K. I. [Departments of Experimental Radiology, Radiation Biology, Biophysics and Biochemistry, University of Rochester, School of Medicine and Dentistry, Rochester, NY (United States)

    1971-03-15

    There are several reasons which prompt a search for suitable biochemical indicators of radiation damage in man. Perhaps the most compelling of these reasons is the urgent need for estimates of exposure doses in cases of accidental exposures of human subjects to ionizing radiations under conditions which preclude a reliable assessment of the exposure dose by the usual physical means. At worst, a biochemical estimate of the dose would provide an independent means of obtaining information otherwise based solely on physical considerations and assumptions. In addition, a biochemical estimate of radiation injury may also, under ideal circumstances, serve as a guide to the attending physician in chosing the type of therapy most efficacious and least likely to lead to complications in the near as well as more distant future. The availability of biochemical indicators capable of revealing with some degree of accuracy the impairment of function of a particular organ would be a helpful adjunct in making decisions concerning the therapeutic approach to be adopted. The latter aspect would be of considerable interest in acute, accidental radiation exposures since under these circumstances radiation exposures are frequently of the partial-body type. An estimate of radiation injury by means of biochemical indicators should also prove useful in cases of protracted or chronic exposures to radiation, the source of which may be either external or internal. The use of biochemical indicators under these conditions of radiation exposure may, in general, aid 'case-finding' efforts and, in a more specific way, may help in pin-pointing discrete organ dysfunctions. In evaluating the suitability of radiation-induced metabolic changes for application as biochemical indicators of radiation damage, the following general criteria may be set forth: (1) the biochemical response to irradiation must be dose-dependent within a certain, sufficiently wide range in order to be useful; (2) the sensitivity

  8. Isolation and selection of new biosurfactant producing bacteria from degraded palm kernel cake under liquid state fermentation.

    Science.gov (United States)

    Jamal, Parveen; Mir, Shajrat; Alam, Md Zahangir; Wan Nawawi, Wan M Fazli

    2014-01-01

    Biosurfactants are surface-active compounds produced by different microorganisms. The aim of this study was to introduce palm kernel cake (PKC) as a novel substrate for biosurfactant production using a potent bacterial strain under liquid state fermentation. This study was primarily based on the isolation and identification of biosurfactant-producing bacteria that could utilize palm kernel cake as a new major substrate. Potential bacterial strains were isolated from degraded PKC and screened for biosurfactant production with the help of the drop collapse assay and by analyzing the surface tension activity. From the screened isolates, a new strain, SM03, showed the best and most consistent results, and was therefore selected as the most potent biosurfactant-producing bacterial strain. The new strain was identified as Providencia alcalifaciens SM03 using the Gen III MicroPlate Biolog Microbial Identification System. The yield of the produced biosurfactant was 8.3 g/L.

  9. Multivariate analysis and determination of the best indirect selection criteria to genetic improvement the biological nitrogen fixation ability in common bean genotypes (Phaseolus vulgaris L.

    Directory of Open Access Journals (Sweden)

    Golparvar Reza Ahmad

    2012-01-01

    Full Text Available In order to determine the best indirect selection criteria for genetic improvement of biological nitrogen fixation, sixty four common bean genotypes were cultivated in two randomized complete block design. Genotypes were inoculated with bacteria Rhizobium legominosarum biovar Phaseoli isolate L-109 only in one of the experiments. The second experiment was considered as check for the first. Correlation analysis showed positive and highly significant correlation of majority of the traits with percent of nitrogen fixation. Step-wise regression designated that traits percent of total nitrogen of shoot, number of nodule per plant and biological yield accounted for 92.3 percent of variation exist in percent of nitrogen fixation. Path analysis indicated that these traits have direct and positive effect on percent of nitrogen fixation. Hence, these traits are promising indirect selection criteria for genetic improvement of nitrogen fixation capability in common bean genotypes especially in early generations.

  10. APPLICATION OF THE MODEL CERNE FOR THE ESTABLISHMENT OF CRITERIA INCUBATION SELECTION IN TECHNOLOGY BASED BUSINESSES : A STUDY IN INCUBATORS OF TECHNOLOGICAL BASE OF THE COUNTRY

    Directory of Open Access Journals (Sweden)

    Clobert Jefferson Passoni

    2017-03-01

    Full Text Available Business incubators are a great source of encouragement for innovative projects, enabling the development of new technologies, providing infrastructure, advice and support, which are key elements for the success of new business. The technology-based firm incubators (TBFs, which are 154 in Brazil. Each one of them has its own mechanism for the selection of the incubation companies. Because of the different forms of management of incubators, the business model CERNE - Reference Center for Support for New Projects - was created by Anprotec and Sebrae, in order to standardize procedures and promote the increase of chances for success in the incubations. The objective of this study is to propose selection criteria for the incubation, considering CERNE’s five dimensions and aiming to help on the decision-making in the assessment of candidate companies in a TBF incubator. The research was conducted from the public notices of 20 TBF incubators, where 38 selection criteria were identified and classified. Managers of TBF incubators validated 26 criteria by its importance via online questionnaires. As a result, favorable ratings were obtained to 25 of them. Only one criterion differed from the others, with a unfavorable rating.

  11. Development of a Selective Medium for the Fungal Pathogen Fusarium graminearum Using Toxoflavin Produced by the Bacterial Pathogen Burkholderia glumae

    Directory of Open Access Journals (Sweden)

    Boknam Jung

    2013-12-01

    Full Text Available The ascomycete fungus Fusarium graminearum is a major causal agent for Fusarium head blight in cereals and produces mycotoxins such as trichothecenes and zearalenone. Isolation of the fungal strains from air or cereals can be hampered by various other airborne fungal pathogens and saprophytic fungi. In this study, we developed a selective medium specific to F. graminearum using toxoflavin produced by the bacterial pathogen Burkholderia glumae. F. graminearum was resistant to toxoflavin, while other fungi were sensitive to this toxin. Supplementing toxoflavin into medium enhanced the isolation of F. graminearum from rice grains by suppressing the growth of saprophytic fungal species. In addition, a medium with or without toxoflavin exposed to wheat fields for 1 h had 84% or 25%, respectively, of colonies identified as F. graminearum. This selection medium provides an efficient tool for isolating F. graminearum, and can be adopted by research groups working on genetics and disease forecasting.

  12. Isolation of biosurfactant-producing marine bacteria and characteristics of selected biosurfactant

    Directory of Open Access Journals (Sweden)

    Kulnaree Phetrong

    2007-05-01

    Full Text Available Biosurfactant-producing marine bacteria were isolated from oil-spilled seawater collected from harbors and docks in Songkhla Province, Thailand. Haemolytic activity, emulsification activity toward nhexadecane,emulsion of weathered crude oil, drop collapsing test as well as oil displacement test were used to determine biosurfactant producing activity of marine bacteria. Among two-hundred different strains, 40strains exhibited clear zone on blood agar plates. Only eight strains had haemolytic activity and were able to emulsify weathered crude oil in marine broth during cultivation. Eight strains named SM1-SM8 wereidentified by 16S rRNA as Myroides sp. (SM1; Vibrio paraheamolyticus (SM2; Bacillus subtilis (SM3; Micrococcus luteus (SM4; Acinetobacter anitratus (SM6; Vibrio paraheamolyticus (SM7 and Bacilluspumilus (SM8. However, SM5 could not be identified. Strain SM1 showed the highest emulsification activity against weathered crude oil, by which the oil was emulsified within 24 h of cultivation. In addition, strainSM1 exhibited the highest activity for oil displacement test and emulsification test toward n-hexadecane. The emulsification activity against n-hexadecane of crude extract of strain SM1 was stable over a broadrange of temperature (30-121oC, pH (5-12 and salt concentration (0-9% NaCl, whereas CaCl2 showed an adverse effect on emulsifying activity.

  13. Selection of biosurfactan/bioemulsifier-producing bacteria from hydrocarbon-contaminated soil

    Directory of Open Access Journals (Sweden)

    Sabina Viramontes-Ramos

    2010-10-01

    Full Text Available Petroleum-derived hydrocarbons are among the most persistent soil contaminants, and some hydrocarbon-degrading microorganisms can produce biosurfactants to increase bioavailability and degradation. The aim of this work was to identify biosurfactant-producing bacterial strains isolated from hydrocarbon-contaminated sites, and to evaluate their biosurfactant properties. The drop-collapse method and minimal agar added with a layer of combustoleo were used for screening, and positive strains were grown in liquid medium, and surface tension and emulsification index were determined in cell-free supernantant and cell suspension. A total of 324 bacterial strains were tested, and 17 were positive for the drop-collapse and hydrocarbon-layer agar methods. Most of the strains were Pseudomonas, except for three strains (Acinetobacter, Bacillus, Rhodococcus. Surface tension was similar in cell-free and cell suspension measurements, with values in the range of 58 to 26 (mN/m, and all formed stable emulsions with motor oil (76-93% E24. Considering the variety of molecular structures among microbial biosurfactants, they have different chemical properties that can be exploited commercially, for applications as diverse as bioremediation or degradable detergents.

  14. Initial characterisation of low and high seed dormancy populations of Lolium rigidum produced by repeated selection.

    Science.gov (United States)

    Goggin, Danica E; Emery, R J Neil; Powles, Stephen B; Steadman, Kathryn J

    2010-10-15

    The physiological and biochemical bases of seed dormancy in Lolium rigidum (annual ryegrass) are largely unknown, and study of this process is complicated by the outcrossing nature of the species and the strong influence of environment on seed dormancy. In order to identify heritable biochemical factors contributing to seed dormancy in L. rigidum, seeds from a field-collected population were used to select sub-populations with consistently low or high seed dormancy over four generations. Low-dormancy seeds showed constitutive alpha-amylase activity prior to imbibition, higher concentrations of polyphenols and cis-zeatin, and lower abscisic acid and cis-zeatin riboside concentrations than high-dormancy seeds. Selection for high dormancy was associated with a reduction in response to dark-stratification for 21d at 20 degrees C (an effective means of releasing dormancy in the original, unselected population) over successive generations, but fluridone remained effective in breaking dormancy. Crossing of low- and high-dormancy populations indicated that dormancy level was not dependent upon the maternal genotype of the seed, and that the constitutive alpha-amylase activity and high seed anthocyanin concentrations characteristic of the low-dormancy populations were not correlated to high basal germination ability. Copyright (c) 2010 Elsevier GmbH. All rights reserved.

  15. Selection of a method to produce activated charcoal using four forest species

    International Nuclear Information System (INIS)

    Herrera Builes, Jhon Fredy; Morales Yepes, Wilmar Alexander; Perez Schile, Juan David

    2004-01-01

    This investigation was conducted in the coal and of forest products laboratory of the Universidad Nacional de Colombia, sede Medellin. It was oriented towards the selection of a method to obtain activated carbon form the following forest species; pino patula (Pinus patula), chingale Jacaranda copaia) pino tecunumani (pinus tecunumani) and roble (Quercus humboldti). The wood of each was characterized determining their physical properties of density and contraction. Seven different methods were tested; chemical activation chemical-physical activation with CO 2 chemical-physical activation with CO 2 and water vapor; chemical-physical activation with water vapor; physical activation with CO 2 ; physical activation with water vapor and physical activation with CO 2 and water vapor. The variables studied were residence time and temperature. Taking as a parameter the Iodine index, the chemical-physical activation with water vapor was selected, obtaining an Iodine index of over 800 for all the species studied with the exception of roble that only attained 764 which is still acceptable for water treatment

  16. Growth kinetic and fuel quality parameters as selective criterion for screening biodiesel producing cyanobacterial strains.

    Science.gov (United States)

    Gayathri, Manickam; Shunmugam, Sumathy; Mugasundari, Arumugam Vanmathi; Rahman, Pattanathu K S M; Muralitharan, Gangatharan

    2018-01-01

    The efficiency of cyanobacterial strains as biodiesel feedstock varies with the dwelling habitat. Fourteen indigenous heterocystous cyanobacterial strains from rice field ecosystem were screened based on growth kinetic and fuel parameters. The highest biomass productivity was obtained in Nostoc punctiforme MBDU 621 (19.22mg/L/day) followed by Calothrix sp. MBDU 701 (13.43mg/L/day). While lipid productivity and lipid content was highest in Nostoc spongiaeforme MBDU 704 (4.45mg/L/day and 22.5%dwt) followed by Calothrix sp. MBDU 701 (1.54mg/L/day and 10.75%dwt). Among the tested strains, Nostoc spongiaeforme MBDU 704 and Nostoc punctiforme MBDU 621 were selected as promising strains for good quality biodiesel production by Preference Ranking Organization Method for Enrichment Evaluation (PROMETHEE) and Graphical Analysis for Interactive Assistance (GAIA) analysis. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Selection of process parameters for producing high quality defatted sesame flour at pilot scale.

    Science.gov (United States)

    Manikantan, M R; Sharma, Rajiv; Yadav, D N; Gupta, R K

    2015-03-01

    The present work was undertaken to study the effect of pearling duration, soaking time, steaming duration and drying temperature on the quality of sesame seeds and mechanically extracted partially defatted sesame cake. On the basis of quality attributes i.e. high protein, low crude fibre, low residual oil and low oxalic acid, the optimum process parameters were selected. The combination of 20 min of pearling duration, 15 min of soaking, 15 min of steaming at 100 kPa pressure and drying at 50 °C yielded high quality partially defatted protein rich sesame flour as compared to untreated defatted sesame flour. The developed high quality partially defatted protein rich sesame flour may be used in various food applications as a vital ingredient to increase the nutritional significance of the prepared foodstuffs.

  18. Competency test for selecting majors to produce competitive vocational graduates in industry

    Directory of Open Access Journals (Sweden)

    Jiwa Permana Agus Aan

    2018-01-01

    Full Text Available President of Indonesia, Jokowi reoriented vocational school graduate toward demand driven graduates that is graduates who have certificate and skill required by industry. The initial stage of the new student on vocational school is choosing a major. At first step, students often confuse in choosing the majors they want. The mistake of choosing a department will be a set beck to the motivation of learning and skill, later will impade students future career. Thus competence test is needed to helping them in choosing the majors according to their competence. The solution to this problem is to conduct online competency tests for new students. The Results of research with 60 responden, 78% corresponds stated that the majors they were in match with their interests. Then the remaining 22% did not match. But the result of the competency assessment of students in match with the majors of is 40% and 60% of students need counseling for selection majors.

  19. Transmission Electron Microscopy of a CMSX-4 Ni-Base Superalloy Produced by Selective Electron Beam Melting

    Directory of Open Access Journals (Sweden)

    Alireza B. Parsa

    2016-10-01

    Full Text Available In this work, the microstructures of superalloy specimens produced using selective electron beam melting additive manufacturing were characterized. The materials were produced using a CMSX-4 powder. Two selective electron beam melting processing strategies, which result in higher and lower effective cooling rates, are described. Orientation imaging microscopy, scanning transmission electron microscopy and conventional high resolution transmission electron microscopy are used to investigate the microstructures. Our results suggest that selective electron beam melting processing results in near equilibrium microstructures, as far as γ′ volume fractions, the formation of small amounts of TCP phases and the partitioning behavior of the alloy elements are concerned. As expected, higher cooling rates result in smaller dendrite spacings, which are two orders of magnitude smaller than observed during conventional single crystal casting. During processing, columnar grains grow in <100> directions, which are rotated with respect to each other. There are coarse γ/γ′ microstructures in high angle boundary regions. Dislocation networks form low angle boundaries. A striking feature of the as processed selective electron beam melting specimens is their high dislocation density. From a fundamental point of view, this opens new possibilities for the investigation of elementary dislocation processes which accompany solidification.

  20. Multi-criteria decision analysis to select the optimum position and proper field of view of a photosensor

    International Nuclear Information System (INIS)

    Doulos, L.; Tsangrassoulis, A.; Topalis, F.V.

    2014-01-01

    Highlights: • A new methodology for the determination of proper FOV and position of a photosensor is proposed. • Model takes into account illuminance ratio, energy savings and lighting adequacy. • A multiple criteria decision method (ELECTRE) is used to estimate best solution. • A number of simulations were performed in order to clarify the calculation procedure. • An experimental procedure was performed in order to verify the simulation procedure. - Abstract: The lack of knowledge concerning the commissioning of a daylight responsive system constitutes a serious impediment to their widespread use. Furthermore, installation details and tools regarding their photosensor position and field of view (FOV) are insufficient. This paper presents a decision making method capable to estimate the best position of a photosensor on the ceiling and its proper FOV based on multiple criteria analysis. The criteria used are (a) the correlation of the lighting levels between the working plane and the ceiling, (b) the corresponding energy savings and (c) the lighting adequacy which is defined as the percentage for occupied time with total illuminance exceeding design illuminance (i.e 500 lux EN 12464-1, 2011) and is strongly affected by the control algorithm. A number of simulations with variable FOV and position of photosensors were performed in order to clarify the calculation procedure of the proposed methodology. Three different typical room geometries have been used with variable window sizes and orientation. Furthermore a prototype photosensor with variable FOV through the use of a telescopic cylinder was constructed and placed in a scale room (1:10) in order to verify the results of simulations. The verification was based on a set of experimental procedures concerning measurements of the spatial response of the prototype photosensor (for various FOVs) and measurements of ceiling/workplane illuminance inside the scaled room for various combinations of position and

  1. GIS-based multi-criteria site selection for zebra mussel cultivation: Addressing end-of-pipe remediation of a eutrophic coastal lagoon ecosystem.

    Science.gov (United States)

    Bagdanavičiūtė, Ingrida; Umgiesser, Georg; Vaičiūtė, Diana; Bresciani, Mariano; Kozlov, Igor; Zaiko, Anastasija

    2018-04-11

    Farming of shellfish and seaweeds is a tested tool for mitigating eutrophication consequences in coastal environments, however as many other marine economic activities it should be a subject of marine spatial planning for designating suitable sites. The present study proposes site selection framework for provisional zebra mussel farming in a eutrophic lagoon ecosystem, aimed primarily at remediation purposes. GIS-based multi-criteria approach was applied, combining data from empirical maps, numerical models and remote sensing to estimate suitability parameters. Site selection and prioritisation of suitable areas considered 15 environmental and socio-economic criteria, which contributed to 4 optimisation models (settlement, growth and survival of mussels, environmental and socio-economic) and 3 predefined scenarios representing provisional goals of mussel cultivation: spat production, biomass production and bioremediation. The relative importance of each criterion was assessed utilizing the Analytical Hierarchy Process. Site suitability index was calculated and the final result of the site selection analysis was summarized for 3 scenarios and overall suitability map. Four suitability classes (unsuitable, least, moderately and most suitable) were applied, and 3 most suitable zones for provisional zebra mussel cultivation with 12 candidate sites were selected accordingly. The integrated approach presented in this study can be adjusted for designating zebra mussel farming sites in other estuarine lagoon ecosystems, or cultivation of other mussel species for bioremediation purposes. The analytical framework and the workflow designed in this study are also adoptable for addressing other aquaculture-related spatial planning issues. Copyright © 2018 Elsevier B.V. All rights reserved.

  2. Computer code selection criteria for flow and transport code(s) to be used in undisturbed vadose zone calculations for TWRS environmental analyses

    International Nuclear Information System (INIS)

    Mann, F.M.

    1998-01-01

    The Tank Waste Remediation System (TWRS) is responsible for the safe storage, retrieval, and disposal of waste currently being held in 177 underground tanks at the Hanford Site. In order to successfully carry out its mission, TWRS must perform environmental analyses describing the consequences of tank contents leaking from tanks and associated facilities during the storage, retrieval, or closure periods and immobilized low-activity tank waste contaminants leaving disposal facilities. Because of the large size of the facilities and the great depth of the dry zone (known as the vadose zone) underneath the facilities, sophisticated computer codes are needed to model the transport of the tank contents or contaminants. This document presents the code selection criteria for those vadose zone analyses (a subset of the above analyses) where the hydraulic properties of the vadose zone are constant in time the geochemical behavior of the contaminant-soil interaction can be described by simple models, and the geologic or engineered structures are complicated enough to require a two-or three dimensional model. Thus, simple analyses would not need to use the fairly sophisticated codes which would meet the selection criteria in this document. Similarly, those analyses which involve complex chemical modeling (such as those analyses involving large tank leaks or those analyses involving the modeling of contaminant release from glass waste forms) are excluded. The analyses covered here are those where the movement of contaminants can be relatively simply calculated from the moisture flow. These code selection criteria are based on the information from the low-level waste programs of the US Department of Energy (DOE) and of the US Nuclear Regulatory Commission as well as experience gained in the DOE Complex in applying these criteria. Appendix table A-1 provides a comparison between the criteria in these documents and those used here. This document does not define the models (that

  3. Chemistry of Secondary Polyphenols Produced during Processing of Tea and Selected Foods

    Directory of Open Access Journals (Sweden)

    Takashi Tanaka

    2009-12-01

    Full Text Available This review will discuss recent progress in the chemistry of secondary polyphenols produced during food processing. The production mechanism of the secondary polyphenols in black tea, whisky, cinnamon, and persimmon fruits will be introduced. In the process of black tea production, tea leaf catechins are enzymatically oxidized to yield a complex mixture of oxidation products, including theaflavins and thearubigins. Despite the importance of the beverage, most of the chemical constituents have not yet been confirmed due to the complexity of the mixture. However, the reaction mechanisms at the initial stages of catechin oxidation are explained by simple quinone–phenol coupling reactions. In vitro model experiments indicated the presence of interesting regio- and stereoselective reactions. Recent results on the reaction mechanisms will be introduced. During the aging of whisky in oak wood barrels, ellagitannins originating from oak wood are oxidized and react with ethanol to give characteristic secondary ellagitannins. The major part of the cinnamon procyanidins is polymerized by copolymerization with cinnamaldehyde. In addition, anthocyanidin structural units are generated in the polymer molecules by oxidation which accounts for the reddish coloration of the cinnamon extract. This reaction is related to the insolubilization of proanthocyanidins in persimmon fruits by condensation with acetaldehyde. In addition to oxidation, the reaction of polyphenols with aldehydes may be important in food processing.

  4. 34 CFR 413.21 - What selection criteria does the Secretary use to evaluate an application proposing research and...

    Science.gov (United States)

    2010-07-01

    ... nondiscriminatory employment practices, will ensure that its personnel are selected for employment without regard to race, color, national origin, gender, age, or disability; and (3) The extent to which other key...

  5. 30 CFR 260.130 - What criteria does MMS use for selecting bidding systems and bidding system components?

    Science.gov (United States)

    2010-07-01

    ... in § 260.110 to tracts selected for any OCS lease sale, we may, at our discretion, consider the... denote a ranking. (a) Providing fair return to the Federal Government; (b) Increasing competition; (c... in OCS lease sales. ...

  6. Sustainable Supplier Selection with A Fuzzy Multi-Criteria Decision Making Method Based on Triple Bottom Line

    OpenAIRE

    Öztürk, Burcu Avcı; Özçelik , Funda

    2014-01-01

    To meet the demands of various stakeholders and to comply with environmental legislations, businesses started to look at their supply chain to enhance their overall sustainability profile. Supply chain operations with sustainability awareness have become an important issue in recent years and make the sustainable supplier performance evaluation and selection process as a central concept of sustainable supply chain management. In this study, supplier selection problem is modelled within the co...

  7. (Independent meaning: Representations of addiction and recovery in selected poems produced in a rehabilitation centre

    Directory of Open Access Journals (Sweden)

    Antoinette Pretorius

    2017-08-01

    Full Text Available In this article we provide a close reading of selected poems written during creative writing workshops at a drug rehabilitation centre. We argue that these poems expose some of the uncertainties and complexities that characterise the representation of identity in experiences of addiction and recovery. We show that the speakers in these poems attempt to imagine and represent their experiences in language through a number of structuring binaries. These binaries include those between the speaker’s experiences of active addiction and recovery, and the speaker’s personal experience versus societal expectations and perceptions. Our reading of these poems is informed by the clinical context in which they were written, and our analysis reflects the bifurcation that governs this liminal space. Individual agency in these different spheres is approached in a very tentative way, and the speakers in these poems are shown to have trouble envisioning the future at the same time as their pasts appear unsettled. We argue finally that while current discourses and vocabularies surrounding addiction seem incomplete and inadequate for the expression of some complex experiences, poetry provides a platform that accommodates ambivalence and a multiplicity of meanings.

  8. Permeability Study of Austenitic Stainless Steel Surfaces Produced by Selective Laser Melting

    Directory of Open Access Journals (Sweden)

    Emmanuel Segura-Cardenas

    2017-11-01

    Full Text Available Selective laser melting (SLM is emerging as a versatile process for fabricating different metal components with acceptable mechanical properties and geometrical accuracy. The process has been used in the manufacturing of several parts (e.g., aerospace or biomedical components, and offers the capability to tailor the performance of several surface and mechanical properties. In this work, permeability properties and surface roughness of stainless steel (SS316L surfaces were evaluated through experimentation with three different laser scanning patterns (chessboard, meander, and stripe, and different sloping angles between the fabricated surface and the laser beam incident on the process. Results showed that for each scanning pattern, the roughness decreased as the sloping angle increased consistently in all experimental trials. Furthermore, in the case of the permeability evaluation, the manufactured surfaces showed changes in properties for each series of experiments performed with different scanning patterns. The chessboard pattern showed a change of 67° to 107° in contact angle, while the meander and stripe patterns showed a variation in contact angle in a range of 65° to 85°. The different scanning strategies in the SLM process resulted in an alternative method for surface enhancement with different hydrophobicity properties, valuable for designing the most appropriate permeability characteristics for specific applications.

  9. Metallurgy of high-silicon steel parts produced using Selective Laser Melting

    International Nuclear Information System (INIS)

    Garibaldi, Michele; Ashcroft, Ian; Simonelli, Marco; Hague, Richard

    2016-01-01

    The metallurgy of high-silicon steel (6.9%wt.Si) processed using Selective Laser Melting (SLM) is presented for the first time in this study. High-silicon steel has great potential as a soft magnetic alloy, but its employment has been limited due to its poor workability. The effect of SLM-processing on the metallurgy of the alloy is investigated in this work using microscopy, X-Ray Diffraction (XRD) and Electron Backscatter Diffraction (EBSD). XRD analysis suggests that the SLM high-silicon steel is a single ferritic phase (solid solution), with no sign of phase ordering. This is expected to have beneficial effects on the material properties, since ordering has been shown to make silicon steels more brittle and electrically conductive. For near-fully dense samples, columnar grains with a high aspect ratio and oriented along the build direction are found. Most importantly, a <001> fibre-texture along the build direction can be changed into a cube-texture when the qualitative shape of the melt-pool is altered (from shallow to deep) by increasing the energy input of the scanning laser. This feature could potentially open the path to the manufacture of three-dimensional grain-oriented high-silicon steels for electromechanical applications.

  10. Elaboration of a fragment library hit produces potent and selective aspartate semialdehyde dehydrogenase inhibitors.

    Science.gov (United States)

    Thangavelu, Bharani; Bhansali, Pravin; Viola, Ronald E

    2015-10-15

    Aspartate-β-semialdehyde dehydrogenase (ASADH) lies at the first branch point in the aspartate metabolic pathway which leads to the biosynthesis of several essential amino acids and some important metabolites. This pathway is crucial for many metabolic processes in plants and microbes like bacteria and fungi, but is absent in mammals. Therefore, the key microbial enzymes involved in this pathway are attractive potential targets for development of new antibiotics with novel modes of action. The ASADH enzyme family shares the same substrate binding and active site catalytic groups; however, the enzymes from representative bacterial and fungal species show different inhibition patterns when previously screened against low molecular weight inhibitors identified from fragment library screening. In the present study several approaches, including fragment based drug discovery (FBDD), inhibitor docking, kinetic, and structure-activity relationship (SAR) studies have been used to guide ASADH inhibitor development. Elaboration of a core structure identified by FBDD has led to the synthesis of low micromolar inhibitors of the target enzyme, with high selectivity introduced between the Gram-negative and Gram-positive orthologs of ASADH. This new set of structures open a novel direction for the development of inhibitors against this validated drug-target enzyme. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. The role of the fire dampers in the event of fire in a nuclear facility. Selection criteria for devices

    International Nuclear Information System (INIS)

    Savornin, J.; Laborde, J.C.

    1989-10-01

    In nuclear facilities, where unacceptable quantities of radioactive aerosols could be spread in the event of a fire, the ventilation system must be designed so that an underpressure is maintained under such circumstances. This is the reason why the extracting ventilation of the room in which the fire has broken out has generally to be kept going as long as possible. This prevents smoke and radioactive aerosols from spreading to accessways and adjacent rooms. Consequently, the various devices of the ventilation network need to have high fire resistance. Fire dampers can be applied to exhaust air to delay the heat build-up of a major fire. Specialized qualification testing is required for these dampers. The criteria we have used as a basis for specifying the required qualities of installations are defined. The tests that have been performed, or are now in progress, are described. The results obtained so far are given. Devices and arrangements are suggested

  12. Multi-Criteria Optimisation of Liquid Cargo Transport According to Linguistic Approach to the Route Selection Task

    Directory of Open Access Journals (Sweden)

    Guze Sambor

    2017-04-01

    Full Text Available The main aim of the paper is to present the possibility of use of the multi-criteria optimization method Analytical Hierarchy Process (AHP to liquid cargo transportation by sea. Finding the optimal solution is not simple. There are many factors influencing the shipping process. In the case of liquid cargo, the most important thing is the safety of the crew, ship, and environment. Therefore, the Mathematical Theory of Evidence is introduced and used to determine the optimal path in terms of time and safety of transport. Moreover, the details of liquid cargo transport process are described with particular attention to ship to ship operations. Besides, the basic concept of the AHP method, steps of the algorithm are introduced. Finally, the multicriteria optimization of the transport of the liquid cargo from the Persian Gulf to Port of Gdansk is done. It is based on the experts′ opinions.

  13. The effects of clinical, epidemiological and economic aspects of changes in classification criteria of selected rheumatic diseases

    Directory of Open Access Journals (Sweden)

    Aleksander J. Owczarek

    2014-06-01

    Full Text Available The paper presents the epidemiology and socio-economic aspects of the three most common rheumatic diseases: rheumatoid arthritis (RA, systemic lupus erythematosus (SLE and scleroderma. The incidence of rheumatic diseases in a population is estimated at 4–5%. Prevalence rate for RA in Poland is 0.45% of the adult population and is similar to the rate reported in the EU (0.49%. It is estimated that the average incidence of SLE is 40–55 per 100 thousand and that the annual incidence of systemic sclerosis is 19–35 cases per million (depending on the country. Nearly 18% of all hospital admissions in Poland are associated with rheumatic diseases. The introduction of new classification criteria for rheumatoid arthritis, allowing classification of the early forms of the disease and their use in clinical practice will probably change the assessment of incidence of this disease in the population.

  14. Review: Towards the agroecological management of ruminants, pigs and poultry through the development of sustainable breeding programmes: I-selection goals and criteria.

    Science.gov (United States)

    Phocas, F; Belloc, C; Bidanel, J; Delaby, L; Dourmad, J Y; Dumont, B; Ezanno, P; Fortun-Lamothe, L; Foucras, G; Frappat, B; González-García, E; Hazard, D; Larzul, C; Lubac, S; Mignon-Grasteau, S; Moreno, C R; Tixier-Boichard, M; Brochard, M

    2016-11-01

    Agroecology uses natural processes and local resources rather than chemical inputs to ensure production while limiting the environmental footprint of livestock and crop production systems. Selecting to achieve a maximization of target production criteria has long proved detrimental to fitness traits. However, since the 1990s, developments in animal breeding have also focussed on animal robustness by balancing production and functional traits within overall breeding goals. We discuss here how an agroecological perspective should further shift breeding goals towards functional traits rather than production traits. Breeding for robustness aims to promote individual adaptive capacities by considering diverse selection criteria which include reproduction, animal health and welfare, and adaptation to rough feed resources, a warm climate or fluctuating environmental conditions. It requires the consideration of genotype×environment interactions in the prediction of breeding values. Animal performance must be evaluated in low-input systems in order to select those animals that are adapted to limiting conditions, including feed and water availability, climate variations and diseases. Finally, we argue that there is no single agroecological animal type, but animals with a variety of profiles that can meet the expectations of agroecology. The standardization of both animals and breeding conditions indeed appears contradictory to the agroecological paradigm that calls for an adaptation of animals to local opportunities and constraints in weakly artificialized systems tied to their physical environment.

  15. Availability of lignocellulosic feedstocks for lactic acid production - Feedstock availability, lactic acid production potential and selection criteria

    NARCIS (Netherlands)

    Bakker, R.R.C.

    2013-01-01

    The overall objective of this study is to assess the worldwide availability and suitability of agricultural residues for lactic acid production, based on fermentation of carbohydrates. The study focuses on lignocellulosic biomass that is produced as a by-product of agricultural production. The

  16. Tertiary Education: An Investigation of Location Selection Criteria and Preferences by International Students--The Case of Two Australian Universities

    Science.gov (United States)

    Abubakar, Binta; Shanka, Tekle; Muuka, Gerry Nkombo

    2010-01-01

    This paper identifies and analyzes factors that influence international student selection of universities and the role that education marketing plays in the process. The research for the paper was inspired by work done by Canterbury on education marketing, published in the "Journal of Marketing for Higher Education". The study…

  17. Multi-criteria decision making on selection of solar–wind hybrid power station location: A case of China

    International Nuclear Information System (INIS)

    Yunna, Wu; Geng, Shuai

    2014-01-01

    Highlights: • We summarize the evaluation attributes from the perspective of project management. • The duties of roles are defined in the decision process. • The decision framework can provide various rankings of alternatives. • A China’s solar–wind hybrid power station location selection case is study. - Abstract: Site selection plays an important role in the entire life cycle of solar–wind hybrid power station (SWHPS) project and is worthy to further study. There are problems in the present researches: first, the SWHPS site evaluation results are difficult to be understood by the project managers due to the evaluations of SWHPS site are few from the perspective of project management. Second, the independence of experts is difficult to be protected since the undefined duties of roles in the evaluation process Third, the project managers cannot consider the alternatives thoroughly because that the evaluation result is single. Hence the innovativeness of this paper is as follows: first, the evaluation attributes of SWHPS site selection are summarized from the perspective of project management; second, the duties of roles in the decision process are defined; third, according to the principle of practicality, a decision framework of SWHPS site selection is built based on the analytic hierarchy process method, the merits of this decision framework are that it can provide various rankings of alternatives and is easy to be used. Finally, a case study of China demonstrates the effectiveness of decision framework

  18. 34 CFR 657.21 - What criteria does the Secretary use in selecting institutions for an allocation of fellowships?

    Science.gov (United States)

    2010-07-01

    ...'s library holdings (both print and non-print, English and foreign language) for students; and the... other than language, linguistics, and literature are offered in appropriate foreign languages; (3... FOREIGN LANGUAGE AND AREA STUDIES FELLOWSHIPS PROGRAM How Does the Secretary Select an Institution for an...

  19. Selection of Universities by Students in Journalism and Mass Communication Courses: Do Criteria Differ between Caucasian and Minority Students?

    Science.gov (United States)

    Biswas, Masudul; Perkins, Lyle; Izard, Ralph

    2012-01-01

    This study measures the significance of factors used by minority students in their selection of universities/colleges. This web survey was conducted mainly on 778 students enrolled in journalism/mass communication courses representing five historically black colleges and universities (HBCUs) and twelve other universities. Differences were found…

  20. Fuzzy bi-criteria decision making approach for supplier selection and distribution network planning in supply chain management

    DEFF Research Database (Denmark)

    Gandhi, Kanika; Govindan, Kannan; Jha, P. C.

    2016-01-01

    Supply chain management (SCM) is to coordinate and integrate material and information within and across organizations. Supplier selection is evaluated as a critical factor for the firms desiring improved and successful supply chain in the process of product realization that starts from the purcha...