Effect of URM infills on seismic vulnerability of Indian code designed RC frame buildings

Science.gov (United States)

Haldar, Putul; Singh, Yogendra; Paul, D. K.

2012-03-01

Unreinforced Masonry (URM) is the most common partitioning material in framed buildings in India and many other countries. Although it is well-known that under lateral loading the behavior and modes of failure of the frame buildings change significantly due to infill-frame interaction, the general design practice is to treat infills as nonstructural elements and their stiffness, strength and interaction with the frame is often ignored, primarily because of difficulties in simulation and lack of modeling guidelines in design codes. The Indian Standard, like many other national codes, does not provide explicit insight into the anticipated performance and associated vulnerability of infilled frames. This paper presents an analytical study on the seismic performance and fragility analysis of Indian code-designed RC frame buildings with and without URM infills. Infills are modeled as diagonal struts as per ASCE 41 guidelines and various modes of failure are considered. HAZUS methodology along with nonlinear static analysis is used to compare the seismic vulnerability of bare and infilled frames. The comparative study suggests that URM infills result in a significant increase in the seismic vulnerability of RC frames and their effect needs to be properly incorporated in design codes.

Infill sampling criteria to locate extremes

CSIR Research Space (South Africa)

Watson, AG

1995-07-01

Full Text Available Three problem-dependent meanings for engineering ''extremes'' are motivated, established, and translated into formal geostatistical (model-based) criteria for designing infill sample networks. (I) Locate an area within the domain of interest where a...

Minimum compliance topology optimization of shell–infill composites for additive manufacturing

NARCIS (Netherlands)

Wu, J.; Clausen, Anders; Sigmund, Ole

2017-01-01

Additively manufactured parts are often composed of two sub-structures, a solid shell forming their exterior and a porous infill occupying the interior. To account for this feature this paper presents a novel method for generating simultaneously optimized shell and infill in the context of

Infilling Littleton Street Mine, Wallsall, with colliery spoil rock paste

Energy Technology Data Exchange (ETDEWEB)

Jarvis, S.T.; Braithwaite, P.A. [Ove Arup and Partners, Birmingham (United Kingdom)

1993-12-31

Describes the filling of an abandoned underground mine with low strength (12-20 kPa) paste made of coal mining waste. With a volume of 550,000 m{sup 3}, it was the largest mine to be filled with rock paste to date. The abandoned mine, flooded with underground water, consists of room and pillar workings at shallow depth of 35 to 60 m. Height of the underground mine cavity varies between 4 and 8 m. The process of infilling and tests and systems for monitoring infilling completeness and strength are described. Benefits of rock paste over other forms of infilling are discussed. Land reclamation work at the source sites is also described. Mineral waste source sites and specifications of the materials are given. After work completion, about 18 ha of derelict urban land were released for redevelopment. 6 refs.

Experimental investigation of the seismic performance of the R/C frames with reinforced masonry infills

Science.gov (United States)

Tanjung, Jafril; Maidiawati, Nugroho, Fajar

2017-10-01

Intensive studies regarding the investigation of seismic performance of reinforced concrete (R/C) frames which are infilled with brick masonry walls have been carried out by several researchers within the last three-decades. According to authors' field and experimentally experiences conclude that the unreinforced brick masonry infills significantly contributes to increase the seismic performance of the R/C frame structure. Unfortunately, the presence of brick masonry infill walls causes several undesirable effects such as short column, soft-storey, torsion and out of plane collapse. In this study, a strengthening technique for the brick masonry infills were experimentally investigated to improve the seismic performance of the R/C frame structures. For this purpose, four experimental specimens have been prepared, i.e. one of bare R/C frame (BF), one of R/C frame infilled with unreinforced brick-masonry wall (IFUM) and two of R/C frames were infilled with reinforced brick-masonry wall (IFRM-1 and IFRM-2). The bare frame and R/C frame infilled with unreinforced brick-masonry wall represents the typical R/C buildings' construction in Indonesia assuming the brick-masonry wall as the non-structural elements. The brick-masonry wall infills in specimens IFRM-1 and IFRM-2 were strengthened by using embedded ϕ4 plain steel bar on their diagonal and center of brick-masonry wall, respectively. All specimens were laterally pushed-over. The lateral loading and its lateral displacement, failure mechanism and their crack pattern were recorded during experimental works. Comparison of the experimental results of these four specimens conclude that the strengthening of the brick-masonry infills wall gave the significantly increasing of the seismic performance of the R/C frame. The seismic performance was evaluated based on the lateral strength of the R/C specimen. The embedded plain steel bar on brick-masonry also reduces the diagonal crack on the brick-masonry wall. It seems that

Assessing metal contamination from construction and demolition (C&D) waste used to infill wetlands: using Deroceras reticulatum (Mollusca: Gastropoda).

Science.gov (United States)

Staunton, John A; Mc Donnell, Rory J; Gormally, Michael J; Williams, Chris D; Henry, Tiernan; Morrison, Liam

2014-11-01

Large quantities of construction and demolition waste (C&D) are produced globally every year, with little known about potential environmental impacts. In the present study, the slug, Deroceras reticulatum (Mollusca: Gastropoda) was used as the first biomonitor of metals (Ag, As, Ba, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Se, Ti, Tl, V and Zn) on wetlands post infilling with construction and demolition (C&D) waste. The bioaccumulation of As, Ba, Cd, Co, Sb, Se and Tl were found to be significantly elevated in slugs collected on C&D waste when compared to unimproved pastures (control sites), while Mo, Se and Sr had significantly higher concentrations in slugs collected on C&D waste when compared to known contaminated sites (mining locations), indicating the potential hazardous nature of C&D waste to biota. Identifying exact sources for these metals within the waste can be problematic, due to its heterogenic nature. Biomonitors are a useful tool for future monitoring and impact studies, facilitating policy makers and regulations in other countries regarding C&D waste infill. In addition, improving separation of C&D waste to allow increased reuse and recycling is likely to be effective in reducing the volume of waste being used as infill, subsequently decreasing potential metal contamination.

Racking shear resistance of steel frames with corner connected precast concrete infill panels

NARCIS (Netherlands)

Hoenderkamp, J.C.D.; Snijder, H.H.; Hofmeyer, H.

2015-01-01

When precast concrete infill panels are connected to steel frames at discrete locations, interaction at the structural interface is neither complete nor absent. The contribution of precast concrete infill panels to the lateral stiffness and strength of steel frames can be significant depending on

121 115 Infilling Direction and Fluid Commu

African Journals Online (AJOL)

2008-12-02

Dec 2, 2008 ... Keywords: Kolo Creek, reservoir geochemistry, reservoir continuity, Niger Delta, petroleum migration ... The infilling of petroleum reservoirs is a ..... Association of Petroleum Geologists Bulletin. 81: 222–248. Hunt, J.M. (1996). Petroleum Geochemistry and. Geology. Freeman and Company, New York.

Cooling joint width and secondary mineral infilling characteristics in four Grande Ronde Basalt flows at the Hanford Site, Washington

International Nuclear Information System (INIS)

Lindberg, J.W.

1988-09-01

Widths were measured and percentages of secondary mineral infilling types were estimated 3194 cooling joints in basalt core of the Rocky Coulee, Cohassett, McCoy Canyon, and Umtanum basalt flows. The core was from core holes RRL-2, RRL-6, RRL-14, and DC-16 on the Hanford Site in Washington State. Joint width was characterized by determining the frequency distribution in each of 16 flow/core hole combination samples (4 flows by 4 core holes = 16 samples) and comparing the distributions between intraflow structures, between basalt flows, and between core holes. Joint infilling was characterized by determining the percentage of joints with each secondary mineral type present and then comparing flows and comparing intraflow instructures. Basalt flows, intraflow structures, and core holes cannot be differentiated consistently on the basis of joint width. There is only one population of widths that can be characterized by a log-normal distribution, an arithmetic mean of 0. 23 mm(9.0E-04in.), and a standard deviation of 0.49 mm (1.9E-03in.). Clay is the predominant infilling type followed by silica and zeolite. For example, 98.1% of the randomly selected joints from the Cohassett flow are filled predominately with clay, 6.5% have zeolite predominating, and 4.0% have silica predominating. Only 19(0.6%) of the 3194 joints measured have observable void space. Basalt flows and intraflow structures cannot be differentiated on the basis joint infilling types, except for the Umtanum entablature. Joint width and infilling types are correlated, and secondary minerals fill basalt cooling joints in a particular sequence

Serviceability limit state related to excessive lateral deformations to account for infill walls in the structural model

Directory of Open Access Journals (Sweden)

G. M. S. ALVA

Full Text Available Brazilian Codes NBR 6118 and NBR 15575 provide practical values for interstory drift limits applied to conventional modeling in order to prevent negative effects in masonry infill walls caused by excessive lateral deformability, however these codes do not account for infill walls in the structural model. The inclusion of infill walls in the proposed model allows for a quantitative evaluation of structural stresses in these walls and an assessment of cracking in these elements (sliding shear diagonal tension and diagonal compression cracking. This paper presents the results of simulations of single-story one-bay infilled R/C frames. The main objective is to show how to check the serviceability limit states under lateral loads when the infill walls are included in the modeling. The results of numerical simulations allowed for an evaluation of stresses and the probable cracking pattern in infill walls. The results also allowed an identification of some advantages and limitations of the NBR 6118 practical procedure based on interstory drift limits.

Sustainable Construction for Urban Infill Development Using Engineered Massive Wood Panel Systems

Directory of Open Access Journals (Sweden)

Steffen Lehmann

2012-10-01

Full Text Available Prefabricated engineered solid wood panel construction systems can sequester and store CO2. Modular cross-laminated timber (CLT, also called cross-lam panels form the basis of low-carbon, engineered construction systems using solid wood panels that can be used to build residential infill developments of 10 storeys or higher. Multi-apartment buildings of 4 to 10 storeys constructed entirely in timber, such as recently in Europe, are innovative, but their social and cultural acceptance in Australia and North America is at this stage still uncertain. Future commercial utilisation is only possible if there is a user acceptance. The author is part of a research team that aims to study two problems: first models of urban infill; then focus on how the use of the CLT systems can play an important role in facilitating a more livable city with better models of infill housing. Wood is an important contemporary building resource due to its low embodied energy and unique attributes. The potential of prefabricated engineered solid wood panel systems, such as CLT, as a sustainable building material and system is only just being realised around the globe. Since timber is one of the few materials that has the capacity to store carbon in large quantities over a long period of time, solid wood panel construction offers the opportunity of carbon engineering, to turn buildings into ‘carbon sinks’. Thus some of the historically negative environmental impact of urban development and construction can be turned around with CLT construction on brownfield sites.

Robust, functional nanocrystal solids by infilling with atomic layer deposition

Energy Technology Data Exchange (ETDEWEB)

Liu, Yao; Gibbs, Markelle; Perkins, Craig L.; Tolentino, Jason; Zarghami, Mohammad H.; Bustamante, Jr., J.; Law, Matt

2011-12-14

Thin films of colloidal semiconductor nanocrystals (NCs) are inherently metatstable materials prone to oxidative and photothermal degradation driven by their large surface-to-volume ratios and high surface energies. The fabrication of practical electronic devices based on NC solids hinges on preventing oxidation, surface diffusion, ripening, sintering, and other unwanted physicochemical changes that can plague these materials. Here we use low-temperature atomic layer deposition (ALD) to infill conductive PbSe NC solids with metal oxides to produce inorganic nanocomposites in which the NCs are locked in place and protected against oxidative and photothermal damage. Infilling NC field-effect transistors and solar cells with amorphous alumina yields devices that operate with enhanced and stable performance for at least months in air. Furthermore, ALD infilling with ZnO lowers the height of the inter-NC tunnel barrier for electron transport, yielding PbSe NC films with electron mobilities of 1 cm² V^-1 s^-1. Our ALD technique is a versatile means to fabricate robust NC solids for optoelectronic devices.

Numerical Study on the In-Plane and Out-of-Plane Resistance of Brick Masonry Infill Panels in Steel Frames

Directory of Open Access Journals (Sweden)

Vahid Bahreini

2017-01-01

Full Text Available Masonry infill walls are one of the main forms of interior partitions and exterior walls in many parts of the world. Nevertheless, serious damage and loss of stability of many masonry infill walls had been reported during recent earthquakes. To improve their performance, the interaction between these infill walls and the bounding frames needs to be properly investigated. Such interaction can dramatically increase the stiffness of the frame in the in-plane direction. To avoid the negative aspects of inappropriate interactions between the frame and infill wall, some kind of isolation needs to be introduced. In this paper, three different configurations have been evaluated by using the general finite element software, ABAQUS. Nonlinear pushover and time history analyses have been conducted for each of the three configurations. Results showed that isolation of the infill from the frame has a significant effect on the in-plane response of infilled frames. Furthermore, adequate out-of-plane stability of the infill wall has been achieved. The results show that masonry infill walls that have full contact at the top of the wall but isolated from columns have shown acceptable performance.

Stormwater Infrastructure at Risk: Predicting the Impacts of Increased Imperviousness due to Infill Development in a Semi-arid Urban Neighborhood

Science.gov (United States)

Hogue, T. S.; Panos, C.; McCray, J. E.; Gilliom, R.

2017-12-01

This research investigates the impacts of infill development (or "redevelopment") on urban stormwater runoff and explores avenues for re-inventing stormwater management strategies for the City of Denver, Colorado. As a rapidly developing city, Denver is facing a cycle of increasing population and redevelopment in the form of infill (where under-utilized parcels within the City are redeveloped into high-density residential land uses). Infill development increases stormwater runoff by introducing more impervious surfaces, including roofs and driveways, which produce more runoff (additional stormwater). However, there is debate on the impact of infill patterns on runoff behavior, peak flows, and flood frequency events. We used a calibrated, high-resolution PCSWMM model to simulate three redevelopment scenarios within the 1000-acre Berkeley neighborhood of northwest Denver. The scenarios utilized future predictions of redevelopment to simulate increases in imperviousness by 1.1, 4.5, and 8.7 percent by 2024, 2034, and 2044, respectively, for a range of design storms. Results predict that, on average, for each 1% increase in impervious area due to infill development, surface runoff volume will increase by 1.28% in the Berkeley neighborhood. Results demonstrate the limitations of the existing storm sewer network as pipes throughout the catchment reach capacity for events larger than the 2-yr storm for all three scenarios. Spatial maps of the catchment pinpoint subcatchments and sewer nodes of concern, namely surrounding a rapidly growing business corridor and the local Interstate. Overall, results indicate the infrastructure of the Berkeley neighborhood may be at risk, and that current stormwater capture policies may need to be revisited to accommodate both future infill development and climate change. This research provides a quantitative basis for implementing potential changes as well as examining the possibility of using the additional stormwater from redevelopment

Exploiting Additive Manufacturing Infill in Topology Optimization for Improved Buckling Load

DEFF Research Database (Denmark)

Clausen, Anders; Aage, Niels; Sigmund, Ole

2016-01-01

Additive manufacturing (AM) permits the fabrication of functionally optimized components with high geometrical complexity. The opportunity of using porous infill as an integrated part of the manufacturing process is an example of a unique AM feature. Automated design methods are still incapable...... the standard and coating approaches to topology optimization for the MBB beam benchmark case. The optimized structures are additively manufactured using a filamentary technique. This experimental study validates the numerical model used in the coating approach. Depending on the properties of the infill...

Seismic performance evaluation of an infilled rocking wall frame structure through quasi-static cyclic testing

Science.gov (United States)

Pan, Peng; Wu, Shoujun; Wang, Haishen; Nie, Xin

2018-04-01

Earthquake investigations have illustrated that even code-compliant reinforced concrete frames may suffer from soft-story mechanism. This damage mode results in poor ductility and limited energy dissipation. Continuous components offer alternatives that may avoid such failures. A novel infilled rocking wall frame system is proposed that takes advantage of continuous component and rocking characteristics. Previous studies have investigated similar systems that combine a reinforced concrete frame and a wall with rocking behavior used. However, a large-scale experimental study of a reinforced concrete frame combined with a rocking wall has not been reported. In this study, a seismic performance evaluation of the newly proposed infilled rocking wall frame structure was conducted through quasi-static cyclic testing. Critical joints were designed and verified. Numerical models were established and calibrated to estimate frame shear forces. The results evaluation demonstrate that an infilled rocking wall frame can effectively avoid soft-story mechanisms. Capacity and initial stiffness are greatly improved and self-centering behavior is achieved with the help of the infilled rocking wall. Drift distribution becomes more uniform with height. Concrete cracks and damage occurs in desired areas. The infilled rocking wall frame offers a promising approach to achieving seismic resilience.

Evaluating reservoir aspects from database on infill/step-out wells

Energy Technology Data Exchange (ETDEWEB)

Springer, S.J. [Springer Consulting Services, Calgary, AB (Canada)

2006-07-01

Statistical plots of production data were used as the basis for calculating simple parameters in order to develop insights into the performance of infill wells drilled in the Western Canadian Sedimentary Basin (WCSB). Unique characteristics of the performance of wells drilled in different parts of the basin were also discussed with the aim of assisting in the screening of future infill drilling projects. The aim of the paper was to demonstrate the effectiveness of a simple statistical analysis of the performance curves and to determine a method of characterizing lateral heterogeneity as well as risks in developing similar pools by infill drilling. The main data sources were the provincial Oil and Gas Reserves Books. Production data were obtained from a commercial data base. Data from wells at a heavy oil sandstone reservoir and a shallow sandstone gas reservoir were evaluated. In both pools, the horizontal infill wells performed better than the vertical wells.The initial rate of the median well was obtained by referencing the wells to its start time. A rate time plot for the first 5 years was prepared for the median wells. Similar plots for the average, 25 and 75 percentile wells were also generated. A cumulative production-frequency plot was generated for each pool. Most of the plots showed a fairly linear trend, reflecting a lognormal distribution. The slope of the lognormal plot reflected the lateral heterogeneity within the prospect. It was concluded that the analysis of the rate-cumulative production plot provided a method of accessing which percentages of the production were incremental reserves and which percentage were accelerated production. 7 refs., 9 tabs., 7 figs.

Mechanical model for steel frames with discretely connected precast concrete infill panels with window openings

NARCIS (Netherlands)

Teeuwen, P.A.; Kleinman, C.S.; Snijder, H.H.

2012-01-01

This paper presents a mechanical model for a structure comprising of steel frames with discretely connected precast concrete infill panels having window openings, termed semi-integral infilled frames. The discrete panel-to-frame connections are realized by structural bolts acting under compression.

Spatial and temporal variability in sedimentation rates associated with cutoff channel infill deposits: Ain River, France

Science.gov (United States)

Piégay, H.; Hupp, C.R.; Citterio, A.; Dufour, S.; Moulin, B.; Walling, D.E.

2008-01-01

Floodplain development is associated with lateral accretion along stable channel geometry. Along shifting rivers, the floodplain sedimentation is more complex because of changes in channel position but also cutoff channel presence, which exhibit specific overflow patterns. In this contribution, the spatial and temporal variability of sedimentation rates in cutoff channel infill deposits is related to channel changes of a shifting gravel bed river (Ain River, France). The sedimentation rates estimated from dendrogeomorphic analysis are compared between and within 14 cutoff channel infills. Detailed analyses along a single channel infill are performed to assess changes in the sedimentation rates through time by analyzing activity profiles of the fallout radionuclides 137Cs and unsupported 210Pb. Sedimentation rates are also compared within the channel infills with rates in other plots located in the adjacent floodplain. Sedimentation rates range between 0.65 and 2.4 cm a−1 over a period of 10 to 40 years. The data provide additional information on the role of distance from the bank, overbank flow frequency, and channel geometry in controlling the sedimentation rate. Channel infills, lower than adjacent floodplains, exhibit higher sedimentation rates and convey overbank sediment farther away within the floodplain. Additionally, channel degradation, aggradation, and bank erosion, which reduce or increase the distance between the main channel and the cutoff channel aquatic zone, affect local overbank flow magnitude and frequency and therefore sedimentation rates, thereby creating a complex mosaic of sedimentation zones within the floodplain and along the cutoff channel infills. Last, the dendrogeomorphic and 137Cs approaches are cross validated for estimating the sedimentation rate within a channel infill.

Buckling Resistance of Basalt Fiber Reinforced Polymer Infill Panel Subjected to Elevated Temperatures

OpenAIRE

Viriyavudh Sim; Woo Young Jung

2017-01-01

Performance of Basalt Fiber Reinforced Polymer (BFRP) sandwich infill panel system under diagonal compression was studied by means of numerical analysis. Furthermore, the variation of temperature was considered to affect the mechanical properties of BFRP, since their composition was based on polymeric material. Moreover, commercial finite element analysis platform ABAQUS was used to model and analyze this infill panel system. Consequently, results of the analyses show that the overall perform...

Experimental Tests on Bending Behavior of Profiled Steel Sheeting Dry Board Composite Floor with Geopolymer Concrete Infill

Directory of Open Access Journals (Sweden)

Mohd Isa Jaffar

Full Text Available Abstract Profiled Steel Sheet Dry Board (PSSDB system is a lightweight composite structure comprises Profiled Steel Sheeting and Dry Board connected by self-drilling and self-tapping screws. This study introduced geopolymer concrete, an eco-friendly material without cement content as an infill material in the PSSDB floor system to highlight its effect onto the PSSDB (with full and half-size dry boards floor system's stiffness and strength. Experimental tests on various full scale PSSDB floor specimens were conducted under uniformly distributed transverse loads. Results illustrate that the rigidity of the panel with geopolymer concrete infill with half-size dry board (HBGPC increases by 43% relative to that of the panel with normal concrete infill with full-size dry board (FBNC. The developed finite-element modeling (FEM successfully predicts the behavior of FBGPC model with 94.8% accuracy. Geopolymer concrete infill and dry board size influence the strength panel, infill contact stiffness, and mid-span deflection of the profiled steel sheeting/dry board (PSSDB flooring system.

Masonry Infilling Effect On Seismic Vulnerability and Performance Level of High Ductility RC Frames

International Nuclear Information System (INIS)

Ghalehnovi, M.; Shahraki, H.

2008-01-01

In last years researchers preferred behavior-based design of structure to force-based one for designing and construction of the earthquake-resistance structures, this method is named performance based designing. The main goal of this method is designing of structure members for a certain performance or behavior. On the other hand in most of buildings, load bearing frames are infilled with masonry materials which leads to considerable changes in mechanical properties of frames. But usually infilling wall's effect has been ignored in nonlinear analysis of structures because of complication of the problem and lack of simple logical solution. As a result lateral stiffness, strength, ductility and performance of the structure will be computed with less accuracy. In this paper by use of Smooth hysteretic model for masonry infillings, some high ductile RC frames (4, 8 stories including 1, 2 and 3 spans) designed according to Iranian code are considered. They have been analyzed by nonlinear dynamic method in two states, with and without infilling. Then their performance has been determined with criteria of ATC 40 and compared with recommended performance in Iranian seismic code (standard No. 2800)

Experimental investigations into in-plane stiffness and strength of steel frames with precast concrete infill panels

NARCIS (Netherlands)

Hoenderkamp, J.C.D.; Hofmeyer, H.; Snijder, H.H.; Richard Liew, J.; Choo, Y.S.

2007-01-01

At Eindhoven University of Technology a research program on composite construction is underway aiming at the development of design rules for steel frames with precast concrete infill panels subject to horizontal loading. In two projects, 3 by 3 m steel frames are infilled with concrete: solid

Infill Walls Contribution on the Progressive Collapse Resistance of a Typical Mid-rise RC Framed Building

Science.gov (United States)

Besoiu, Teodora; Popa, Anca

2017-10-01

This study investigates the effect of the autoclaved aerated concrete infill walls on the progressive collapse resistance of a typical RC framed structure. The 13-storey building located in Brăila (a zone with high seismic risk in Romania) was designed according to the former Romanian seismic code P13-70 (1970). Two models of the structure are generated in the Extreme Loading® for Structures computer software: a model with infill walls and a model without infill walls. Following GSA (2003) Guidelines, a nonlinear dynamic procedure is used to determine the progressive collapse risk of the building when a first-storey corner column is suddenly removed. It was found that, the structure is not expected to fail under the standard GSA loading: DL+0.25LL. Moreover, if the infill walls are introduced in the model, the maximum vertical displacement of the node above the removed column is reduced by about 48%.

Modelling of masonry infill walls participation in the seismic behaviour of RC buildings using OpenSees

Science.gov (United States)

Furtado, André; Rodrigues, Hugo; Arêde, António

2015-06-01

Recent earthquakes show that masonry infill walls should be taken into account during the design and assessment process of structures, since this type of non-structural elements increase the in-plane stiffness of the structure and consequently the natural period. An overview of the past researches conducted on the modelling of masonry infilled frame issues has been done, with discussion of past analytical investigations and different modelling approaches that many authors have proposed, including micro- and macro-modelling strategies. After this, the present work presents an improved numerical model, based on the Rodrigues et al. (J Earthq Eng 14:390-416, 2010) approach, for simulating the masonry infill walls behaviour in the computer program OpenSees. The main results of the in-plane calibration analyses obtained with one experimental test are presented and discussed. For last, two reinforced concrete regular buildings were studied and subjected to several ground motions, with and without infills' walls.

Measuring the Air Quality and Transportation Impacts of Infill Development

Science.gov (United States)

This report summarizes three case studies. The analysis shows how standard forecasting tools can be modified to capture at least some of the transportation and air quality benefits of brownfield and infill development.

Infill Panels and the tube connection in timber frames

NARCIS (Netherlands)

Leijten, A.J.M.; Jorissen, A.J.M.; Hoenderkamp, J.C.D.

2012-01-01

In recent years timber infill panels have been proposed for multi-story column-beam frame structures with the aim to substitute the stabilizing function of column-beam moment connections. The preliminary study reported in this paper considers a column-beam timber frame where stability is assured by

Lateral Stiffness of Timber Frames with CLT Infill Panels

NARCIS (Netherlands)

Leijten, A.J.M.; Jorissen, A.J.M.; Hoenderkamp, J.C.D.; Haddad, Y.M.

2011-01-01

In recent years timber infill panels have been proposed for multi-story column-beam frame structures with the aim to substitute the stabilizing function of column-beam moment connections. The preliminary study reported in this paper considers a column-beam timber frame where stability is assured by

Analysis of steel frames with precast concrete infill panels

NARCIS (Netherlands)

Teeuwen, P.A; Kleinman, C.S.; Snijder, H.H.; Hofmeyer, H.; IABSE-AIPPC-IVBH, xx

2008-01-01

This paper presents experimental and numerical analyses of a new type of hybrid lateral load resisting structure. This structure consists of a steel frame with a discretely connected precast concrete infill panel with a window opening. The discrete connections are formed by structural bolts on the

Composite action of steel frames and precast concrete infill panels with corner connections – Part 1 : experiments

NARCIS (Netherlands)

Hoenderkamp, J.C.D.; Snijder, H.H.; Hofmeyer, H.; Liew, J.Y.R.; Lee, S.C.

2012-01-01

When precast concrete infill panels are connected to steel frames at discrete locations, interaction at the structural interface is neither complete nor absent. The contribution of precast concrete infill panels to the lateral stiffness and strength of steel frames can be significant depending on

Sedimentary infilling of bedrock-controlled palaeo-embayments off Cape Trafalgar, Strait of Gibraltar (Gulf of Cadiz)

Science.gov (United States)

de Castro, Sandra; Lobo, Francisco J.

2018-02-01

This study investigates two bedrock-controlled palaeo-coastal embayments on the Barbate Platform off Cape Trafalgar near the Strait of Gibraltar (Gulf of Cadiz shelf, SW Iberian Peninsula), aiming to reveal their infilling dynamics and the influence of rocky outcrops on shallow-water hydrodynamics and sediment transport. The approach relies on detailed multibeam bathymetric data, high-resolution seismic profiles and tidal current simulations. Elongated rocky outcrops formed a palaeo-coast when sea level was approximately 35 to 20 m below that of the present day, and bound a relatively flat area. However, the seismic profiles enabled to distinguish two main troughs (A and B) that were infilled following a distinctive evolution during the last transgression. Five seismic units were identified (I to V, from base to top). Deposit A is composed of seismic units II to V and is interpreted as a marine embayment infill, here termed the Barbate palaeo-embayment (BPE). Deposit B is composed of seismic units I to IV and is interpreted as a palaeo-valley infill, here termed the Barbate palaeo-valley (BPV). The complex internal stratigraphic architecture depicts an overall evolution from tidal/fluvial deposits to shallow-water marine deposits. Most significant is the occurrence of coupled tidal flats/estuarine sand bars constituting the infilling of the BPE; this suggests the persistence of a high-energy current in a shallow, confined embayment, which was amplified by the rocky outcrop constrictions and possibly facilitated by the episodic movement of a normal fault. In contrast to this active setting, the nearby straight and narrow BPV was subjected to lower-energy infilling dynamics during its initial flooding phases. There, tidal activity was possibly reduced by the straight morphology of the valley and the occurrence of a topographic constriction (i.e. the Barbate Passage) at the mouth of the valley.

Time-transgressive tunnel valley formation indicated by infill sediment structure, North Sea - the role of glaciohydraulic supercooling

DEFF Research Database (Denmark)

Kristensen, Thomas Bojer; Piotrowski, Jan; Huuse, Mads

2008-01-01

Structure and lithology of the infill sediments from 16 subglacial buried tunnel valleys of Pleistocene age in the North Sea were analyzed using 3D seismic data and geophysical log data from five hydrocarbon exploration wells. The infill sediments are characterized by three seismic facies: Facies...

Engineered cementitious composites for strengthening masonry infilled reinforced concrete frames

DEFF Research Database (Denmark)

Dehghani, Ayoub; Nateghi-Alahi, Fariborz; Fischer, Gregor

2015-01-01

The results of the second part of a comprehensive experimental program, aimed at investigating the behavior of masonry infilled reinforced concrete (RC) frames strengthened with fiber reinforced engineered cementitious composites (ECC) used as an overlay on the masonry wall, are presented...

Infill Optimization for Additive Manufacturing - Approaching Bone-like Porous Structures

DEFF Research Database (Denmark)

Wu, Jun; Aage, Niels; Westermann, Ruediger

2018-01-01

Porous structures such as trabecular bone are widely seen in nature. These structures exhibit superior mechanical properties whilst being lightweight. In this paper, we present a method to generate bone-like porous structures asl ightweight infill for additive manufacturing. Our method builds upon...

An effective simplified model of composite compression struts for partially-restrained steel frame with reinforced concrete infill walls

Science.gov (United States)

Sun, Guohua; Chuang-Sheng, Walter Yang; Gu, Qiang; DesRoches, Reginald

2018-04-01

To resolve the issue regarding inaccurate prediction of the hysteretic behavior by micro-based numerical analysis for partially-restrained (PR) steel frames with solid reinforced concrete (RC) infill walls, an innovative simplified model of composite compression struts is proposed on the basis of experimental observation on the cracking distribution, load transferring mechanism, and failure modes of RC infill walls filled in PR steel frame. The proposed composite compression struts model for the solid RC infill walls is composed of α inclined struts and main diagonal struts. The α inclined struts are used to reflect the part of the lateral force resisted by shear connectors along the frame-wall interface, while the main diagonal struts are introduced to take into account the rest of the lateral force transferred along the diagonal direction due to the complicated interaction between the steel frame and RC infill walls. This study derives appropriate formulas for the effective widths of the α inclined strut and main diagonal strut, respectively. An example of PR steel frame with RC infill walls simulating simulated by the composite inclined compression struts model is illustrated. The maximum lateral strength and the hysteresis curve shape obtained from the proposed composite strut model are in good agreement with those from the test results, and the backbone curve of a PR steel frame with RC infill walls can be predicted precisely when the inter-story drift is within 1%. This simplified model can also predict the structural stiffness and the equivalent viscous damping ratio well when the inter-story drift ratio exceeds 0.5%.

Composite Behaviour of Steel Frames with Precast Concrete Infill Panels

NARCIS (Netherlands)

Hoenderkamp, J.C.D.; Hofmeyer, H.; Snijder, H.H.; B. Hoffmeister, xx; O. Hechler, xx

2005-01-01

This paper presents preliminary experimental and numerical results of an investigation into the composite behaviour of a steel frame with a precast concrete infill panel (S-PCP) subject to a lateral load. The steel-concrete connections consist of two plates connected with two bolts which are loaded

Behavior of masonry strengthened infilled reinforced concrete frames under in-plane load

Directory of Open Access Journals (Sweden)

Lila M. Abdel-Hafez

2015-08-01

The ductility of infilled frame strengthened with ferrocement was the best of all strengthened frames, while strengthening with GFRP increases its ultimate load carrying capacity but reduces its ductility.

Analytical modeling of masonry infilled steel frames

International Nuclear Information System (INIS)

Flanagan, R.D.; Jones, W.D.; Bennett, R.M.

1991-01-01

A comprehensive program is underway at the Oak Ridge Y-12 Plant to evaluate the seismic capacity of unreinforced hollow clay tile infilled steel frames. This program has three major parts. First, preliminary numerical analyses are conducted to predict behavior, initial cracking loads, ultimate capacity loads, and to identify important parameters. Second, in-situ and laboratory tests are performed to obtain constitutive parameters and confirm predicted behavior. Finally, the analytical techniques are refined based on experimental results. This paper summarizes the findings of the preliminary numerical analyses. A review of current analytical methods was conducted and a subset of these methods was applied to known experimental results. Parametric studies were used to find the sensitivity of the behavior to various parameters. Both in-plane and out-of-plane loads were examined. Two types of out-of-plane behavior were examined, the inertial forces resulting from the mass of the infill panel and the out-of-plane forces resulting from interstory drift. Cracking loads were estimated using linear elastic analysis and an elliptical failure criterion. Calculated natural frequencies were correlated with low amplitude vibration testing. Ultimate behavior under inertial loads was estimated using a modified yield line procedure accounting for membrane stresses. The initial stiffness and ultimate capacity under in-plane loadings were predicted using finite element analyses. Results were compared to experimental data and to failure loads obtained using plastic collapse theory

The flow properties of colliery spoil rockpaste as used in the infilling of abandoned mine workings

Energy Technology Data Exchange (ETDEWEB)

Ghataora, G.S.; Jarvis, S.T. [University of Birmingham, Birmingham (United Kingdom)

1998-07-01

Colliery spoil is the major constituent of colliery spoil 'rockpaste' which has been used to infill abandoned limestone mines in the West Midlands of England since the early 1980s. The other constituents of rockpaste are pulverised fuel ash, lime and water. A key property of the rockpaste is its ability to flow within the mine workings over considerable distances before setting. This paper describes the work carried out to identify suitable sites as sources of colliery spoil for making rockpaste and goes on to consider the flow properties of the material and the monitoring methods used on-site. A full-scale trial comprising infilling a 6600 m{sup 3} section of an abandoned mine was conducted prior to the infilling of the Littleton Street Mine which had a volume of about 500 000 m{sup 3}. As well as describing the methods used for monitoring the movement of rockpaste material, a description is also given of a dip-meter developed specifically for the purpose of measuring the level of paste in the mine. The monitoring systems developed for use in the two case studies presented in this paper are now being used extensively for infilling other abandoned mine workings. 5 refs., 16 figs., 1 tab., 1 plate.

Mechanical characterization and force-displacement hysteretic curves from in-plane cyclic tests on strong masonry infills.

Science.gov (United States)

Morandi, Paolo; Hak, Sanja; Magenes, Guido

2018-02-01

This article contains information related to a recent study "Performance-based interpretation of in-plane cyclic tests on RC frames with strong masonry infills" (Morandi et al., 2017 [1]). Motivated by the necessity to improve the knowledge of the in-plane seismic response of rigid strong masonry infills, a wide experimental campaign based on in-plane cyclic tests on full-scale RC infilled frame specimens, supplemented with a complete characterization of the materials, has been conducted at the laboratory of the Department of Civil Engineering and Architecture of the University of Pavia. The masonry is constituted by vertically perforated 35 cm thick clay units with tongue and groove and dry head-joints and general-purpose mortar bed-joints. The paper reports the results of the mechanical characterization and of the force-displacement hysteretic curves from the in-plane cyclic tests.

Composite action of steel frames and precast concrete infill panels with corner connections – Part 2 : finite element analysis

NARCIS (Netherlands)

Hoenderkamp, J.C.D.; Hofmeyer, H.; Snijder, H.H.; Liew, J.Y.R.; Lee, S.C.

2012-01-01

When precast concrete infill panels are connected to steel frames at discrete locations, interaction at the structural interface is neither complete nor absent. The contribution of precast concrete infill panels to the lateral stiffness and strength of steel frames can be significant depending on

The shear resistance of steel frames infilled with CASIEL wall panels

NARCIS (Netherlands)

Ng'Andu, B.M.; Vermeltfoort, A.T.

2007-01-01

In Europe, calcium silicate element (CASIEL) walls are increasingly employed as partitions and intemal claddings in buildings. When surrounded by frames, the interaction between the CASIEL infills and the frames has a significant influence on the load transmission paths of building structures. In

Leaching of zinc from rubber infill on artificial turf (football pitches)

NARCIS (Netherlands)

Verschoor AJ; LER

2007-01-01

Many artificial football pitches are treated with a rubber infill made of recycled tyres. From this material zinc leaches to the soil, groundwater and surface water. [This can present significant environmental risks, particularly for aquatic life.] Human health risks posed by leaching of zinc are

Experimental evaluation of the prevention methods for the interface between masonry infill walls and concrete columns

Directory of Open Access Journals (Sweden)

A. P. Tramontin

Full Text Available Cracks that form at the interfaces between masonry structures are common uncontrolled occurrences in buildings. Numerous methods have been proposed by the construction industry to address this problem. Cracks continuously form in the joints between concrete columns and masonry infill walls. In this study, the most common methods for preventing these types of cracks were evaluated in laboratory experiments. Column masonry models were constructed using different types of joints between concrete columns and masonry infill walls, such as steel bars and steel mesh. The efficiency of each type of joint method was evaluated by performing direct tensile tests (pullout tests on the models and monitoring the evolution of the crack opening in the joint between the column and wall, as a function of load applied to the model. The results from this study indicate that the model composed of "electrowelded wire mesh without steel angles" is the best model for controlling cracking in the joints between concrete columns and masonry infill walls.

Push-Pull interface connections in steel frames with precast concrete infill panels

NARCIS (Netherlands)

Hoenderkamp, J.C.D.; Snijder, H.H.; Hofmeyer, H.

2012-01-01

This paper presents experimental and finite element results of investigations into the stiffness and strength of three discrete interface connections between simple steel frames and precast concrete infill panels serving as lateral bracing. The ability of the connections to resist compression and

Performance of Reinforced Concrete Beam with Differently Positioned Replacement Zones of Block Infill under Low Impact Loads

Directory of Open Access Journals (Sweden)

Mokhatar Shahrul Niza

2017-01-01

Full Text Available This paper reveals a study performed on reinforced concrete with artificial aggregate concrete block infill composite beams to innovate a lightweight reinforced concrete utilizing polyethylene (PE waste materials, such as waste plastic bags. Six beam specimens of normal reinforced concrete (NRC and different block infill replacement zone positions RCAI (RZ1 beams containing 100% MAPEA with 50, 95, and 1,000 mm width, height, and length, respectively, were provided for the block infill, whereas RCAI (RZ2 with different block infill positions containing a 100% MAPEA with 50, 115, and 1000 mm width, height, and length were provided and tested under low impact load. The steel impactor with blunt nose dropped at 0.6 m height which equivalent to 3.5 m/s. The behaviors of the beams were studied relative to the impact force-time and displacement-time histories, the flexural/ bending cracks, and the impact failure. Results show that the overall failure modes of all the beam specimens were successfully recorded. In addition, the residual displacements of the RZ2 was almost same than those of the RZ1 and the significantly lower than those of the NRC. In the reinforced concrete beams, less stressed concrete near the neutral axis can be replaced by certain light weight material like waste plastic bags as modified artificial polyethylene aggregates to serve as an artificial aggregate.

Thermal tuning of a silicon photonic crystal cavity infilled with an elastomer

NARCIS (Netherlands)

Erdamar, A.K.; Van Leest, M.M.; Picken, S.J.; Caro, J.

2011-01-01

Thermal tuning of the transmission of an elastomer infilled photonic crystal cavity is studied. An elastomer has a thermal expansion-induced negative thermo-optic coefficient that leads to a strong decrease of the refractive index upon heating. This property makes elastomer highly suitable for

Influence of masonry infill walls on longitudinal forces in columns of ...

African Journals Online (AJOL)

In this paper the result of conducted numerical studies based on space calculation models are presented. It presents the results of a conducted numerical assessment of the influence of masonry infill walls on variation and redistribution of efforts arising in columns of a cast-in-situ framed building. The quantitative data of the ...

The FP4026 Research Database on the fundamental period of RC infilled frame structures.

Science.gov (United States)

Asteris, Panagiotis G

2016-12-01

The fundamental period of vibration appears to be one of the most critical parameters for the seismic design of buildings because it strongly affects the destructive impact of the seismic forces. In this article, important research data (entitled FP4026 Research Database (Fundamental Period-4026 cases of infilled frames) based on a detailed and in-depth analytical research on the fundamental period of reinforced concrete structures is presented. In particular, the values of the fundamental period which have been analytically determined are presented, taking into account the majority of the involved parameters. This database can be extremely valuable for the development of new code proposals for the estimation of the fundamental period of reinforced concrete structures fully or partially infilled with masonry walls.

The FP4026 Research Database on the fundamental period of RC infilled frame structures

Directory of Open Access Journals (Sweden)

Panagiotis G. Asteris

2016-12-01

Full Text Available The fundamental period of vibration appears to be one of the most critical parameters for the seismic design of buildings because it strongly affects the destructive impact of the seismic forces. In this article, important research data (entitled FP4026 Research Database (Fundamental Period-4026 cases of infilled frames based on a detailed and in-depth analytical research on the fundamental period of reinforced concrete structures is presented. In particular, the values of the fundamental period which have been analytically determined are presented, taking into account the majority of the involved parameters. This database can be extremely valuable for the development of new code proposals for the estimation of the fundamental period of reinforced concrete structures fully or partially infilled with masonry walls.

The contribution of CASIEL infill walls to the shear resistance of steel frames

NARCIS (Netherlands)

Ng'Andu, B.M.; Martens, D.R.W; Vermeltfoort, A.T.

2006-01-01

In Europe, calcium silicate element (CASIEL) walls are increasingly employed as partitions and external claddings in buildings. The CASIEL infills and the frames mutually interact through frame-wall interfaces. This interaction has a significant influence on the load transmission paths of building

Structural behavior of lightweight bamboo reinforced concrete slab with EPS infill panel

Science.gov (United States)

Wibowo, Ari; Wijatmiko, Indradi; Nainggolan, Christin Remayanti

2017-09-01

Eco-friendly, green, and natural materials have become increasingly important issues in supporting sustainable development, for the substitution of nonrenewable materials such as steel. Bamboo has been considered in many studies to replace steel in reinforced concrete elements. Further investigation has been carried out to obtain lightweight and eco-friendly reinforced concrete slabs by using bamboo bars as reinforcement and recycled materials such as EPS (expanded polystyrene) as infill panel. The flexural loading test on full scale one-way slabs test has been conducted. The results showed that the flexural strength of specimens decreased marginally of about 6% but with the weight advantage of 27% less compared with those of steel rebar reinforced concrete slab with the same dimension. Two type shear-connectors comprising of concrete and bamboo studs were also investigated which showed that the bamboo stud provided better ductility compared to that of slab with concrete as shear connector. Overall, the reinforced concrete slab with bamboo reinforcement and EPS infill panel showed reasonably good performance compared to slabs with steel rebar.

No-infill 3D Printing

Science.gov (United States)

Wei, Xiao-Ran; Zhang, Yu-He; Geng, Guo-Hua

2016-09-01

In this paper, we examined how printing the hollow objects without infill via fused deposition modeling, one of the most widely used 3D-printing technologies, by partitioning the objects to shell parts. More specifically, we linked the partition to the exact cover problem. Given an input watertight mesh shape S, we developed region growing schemes to derive a set of surfaces that had inside surfaces that were printable without support on the mesh for the candidate parts. We then employed Monte Carlo tree search over the candidate parts to obtain the optimal set cover. All possible candidate subsets of exact cover from the optimal set cover were then obtained and the bounded tree was used to search the optimal exact cover. We oriented each shell part to the optimal position to guarantee the inside surface was printed without support, while the outside surface was printed with minimum support. Our solution can be applied to a variety of models, closed-hollowed or semi-closed, with or without holes, as evidenced by experiments and performance evaluation on our proposed algorithm.

Experimental Investigation of the Shear Resistance of Steel Frames with Precast Concrete Infill Panels

NARCIS (Netherlands)

Hoenderkamp, J.C.D.; Hofmeyer, H.; Snijder, H.H.

2010-01-01

At the Technische Universiteit Eindhoven a research program on composite construction is underway aiming at the development of design rules for steel frames with discretely connected precast concrete infill panels subject to in-plane horizontal loading. This paper presents experimental and finite

Reconstruction of deglacial sea surface temperature in the tropical Pacific from selective analysis of a fossil coral

Energy Technology Data Exchange (ETDEWEB)

Allison, N.; Finch, A.A.; Tudhope, A.W.; Newville, M.; Sutton, S.R.; Ellam, R.M. (St Andrews); (Edinburgh); (Scottish); (UC); (St Andrews)

2010-07-13

The Sr/Ca of coral skeletons demonstrates potential as an indicator of sea surface temperatures (SSTs). However, the glacial-interglacial SST ranges predicted from Sr/Ca of fossil corals are usually higher than from other marine proxies. We observed infilling of secondary aragonite, characterized by high Sr/Ca ratios, along intraskeletal pores of a fossil coral from Papua New Guinea that grew during the penultimate deglaciation (130 {+-} 2 ka). Selective microanalysis of unaltered areas of the fossil coral indicates that SSTs at {approx}130 ka were {le} 1 C cooler than at present in contrast with bulk measurements (combining infilled and unaltered areas) which indicate a difference of 6-7 C. The analysis of unaltered areas of fossil skeletons by microprobe techniques may offer a route to more accurate reconstruction of past SSTs.

Sediment yield model implementation based on check dam infill stratigraphy in a semiarid Mediterranean catchment

Directory of Open Access Journals (Sweden)

G. Bussi

2013-08-01

Full Text Available Soil loss and sediment transport in Mediterranean areas are driven by complex non-linear processes which have been only partially understood. Distributed models can be very helpful tools for understanding the catchment-scale phenomena which lead to soil erosion and sediment transport. In this study, a modelling approach is proposed to reproduce and evaluate erosion and sediment yield processes in a Mediterranean catchment (Rambla del Poyo, Valencia, Spain. Due to the lack of sediment transport records for model calibration and validation, a detailed description of the alluvial stratigraphy infilling a check dam that drains a 12.9 km2 sub-catchment was used as indirect information of sediment yield data. These dam infill sediments showed evidences of at least 15 depositional events (floods over the time period 1990–2009. The TETIS model, a distributed conceptual hydrological and sediment model, was coupled to the Sediment Trap Efficiency for Small Ponds (STEP model for reproducing reservoir retention, and it was calibrated and validated using the sedimentation volume estimated for the depositional units associated with discrete runoff events. The results show relatively low net erosion rates compared to other Mediterranean catchments (0.136 Mg ha−1 yr−1, probably due to the extensive outcrops of limestone bedrock, thin soils and rather homogeneous vegetation cover. The simulated sediment production and transport rates offer model satisfactory results, further supported by in-site palaeohydrological evidences and spatial validation using additional check dams, showing the great potential of the presented data assimilation methodology for the quantitative analysis of sediment dynamics in ungauged Mediterranean basins.

An experimental investigation on the ultimate strength of epoxy repaired braced partial infilled RC frames

Science.gov (United States)

Dubey, Shailendra Kumar Damodar; Kute, Sunil

2014-09-01

Due to earthquake, buildings are damaged partially or completely. Particularly structures with soft storey are mostly affected. In general, such damaged structures are repaired and reused. In this regard, an experimental investigation was planned and conducted on models of single-bay, single-storey of partial concrete infilled reinforced concrete (RC) frames up to collapse with corner, central and diagonal steel bracings. Such collapsed frames were repaired with epoxy resin and retested. The initiative was to identify the behaviour, extent of restored ultimate strength and deflection of epoxy-retrofitted frames in comparison to the braced RC frames. The performance of such frames has been considered only for lateral loads. In comparison to bare RC frames, epoxy repaired partial infilled frames have significant increase in the lateral load capacity. Central bracing is more effective than corner and diagonal bracing. For the same load, epoxy repaired frames have comparable deflection than similar braced frames.

Influence of system controls on the Late Quaternary geomorphic evolution of a rapidly-infilled incised-valley system: The lower Manawatu valley, North Island New Zealand

Science.gov (United States)

Clement, Alastair J. H.; Fuller, Ian C.

2018-02-01

The Manawatu incised-valley estuary was rapidly infilled between 12,000-4700 cal. yr BP. A combination of empirical measurements of sedimentation rates, a reconstruction of relative sea-level (RSL) change, and digital elevation models of key surfaces within the Holocene sedimentary fill of the valley were integrated to produce a numerical model to investigate the influence of the system controls of sea-level change, sediment flux, and accommodation space on the rapid infilling history of the palaeo-estuary. The numerical model indicates that sediment flux into the palaeo-estuary was greatest during the Holocene marine transgression between 12,000-8000 years BP. The average rate of sediment deposition in the estuary during this period was 1.0 M m3 yr- 1. This rapid rate of sedimentation was controlled by the rate of accommodation space creation, as regulated by the rate of sea-level rise and the antecedent configuration of the valley. By the time sea levels stabilised c. 7500 cal. yr BP, the palaeo-estuary had been substantively infilled. Limited accommodation space resulted in rapid infilling of the central basin, though sediment flux into the estuary between 7100 and 4500 cal. yr BP was at a lower rate of 234,000 m3 yr- 1. The limited accommodation space also influenced hydrodynamic conditions in the estuarine central basin, driving export of fine-grained sediment from the estuary. Once the accommodation space of the estuarine basin was infilled sediment bypassed the system, with a consequent reduction in the sedimentation rate in the valley. More accurate partitioning of the sources of sediment driving the infilling is necessary to quantify sediment bypassing. Post-depositional lowering of RSL index points from the valley is driven by neotectonics and sediment compaction.

Concrete Infill Monitoring in Concrete-Filled FRP Tubes Using a PZT-Based Ultrasonic Time-of-Flight Method.

Science.gov (United States)

Luo, Mingzhang; Li, Weijie; Hei, Chuang; Song, Gangbing

2016-12-07

Concrete-filled fiber-reinforced polymer tubes (CFFTs) have attracted interest for their structural applications in corrosive environments. However, a weak interfacial strength between the fiber-reinforced polymer (FRP) tube and the concrete infill may develop due to concrete shrinkage and inadequate concrete compaction during concrete casting, which will destroy the confinement effect and thereby reduce the load bearing capacity of a CFFT. In this paper, the lead zirconate titanate (PZT)-based ultrasonic time-of-flight (TOF) method was adopted to assess the concrete infill condition of CFFTs. The basic idea of this method is that the velocity of the ultrasonic wave propagation in the FRP material is about half of that in concrete material. Any voids or debonding created along the interface between the FRP tube and the concrete will delay the arrival time between the pairs of PZT transducers. A comparison of the arrival times of the PZT pairs between the intact and the defected CFFT was made to assess the severity of the voids or the debonding. The feasibility of the methodology was analyzed using a finite-difference time-domain-based numerical simulation. Experiments were setup to validate the numerical results, which showed good agreement with the numerical findings. The results showed that the ultrasonic time-of-flight method is able to detect the concrete infill condition of CFFTs.

Concrete Infill Monitoring in Concrete-Filled FRP Tubes Using a PZT-Based Ultrasonic Time-of-Flight Method

Science.gov (United States)

Luo, Mingzhang; Li, Weijie; Hei, Chuang; Song, Gangbing

2016-01-01

Concrete-filled fiber-reinforced polymer tubes (CFFTs) have attracted interest for their structural applications in corrosive environments. However, a weak interfacial strength between the fiber-reinforced polymer (FRP) tube and the concrete infill may develop due to concrete shrinkage and inadequate concrete compaction during concrete casting, which will destroy the confinement effect and thereby reduce the load bearing capacity of a CFFT. In this paper, the lead zirconate titanate (PZT)-based ultrasonic time-of-flight (TOF) method was adopted to assess the concrete infill condition of CFFTs. The basic idea of this method is that the velocity of the ultrasonic wave propagation in the FRP material is about half of that in concrete material. Any voids or debonding created along the interface between the FRP tube and the concrete will delay the arrival time between the pairs of PZT transducers. A comparison of the arrival times of the PZT pairs between the intact and the defected CFFT was made to assess the severity of the voids or the debonding. The feasibility of the methodology was analyzed using a finite-difference time-domain-based numerical simulation. Experiments were setup to validate the numerical results, which showed good agreement with the numerical findings. The results showed that the ultrasonic time-of-flight method is able to detect the concrete infill condition of CFFTs. PMID:27941617

Out-of-plane behavior of hollow clay tile walls infilled between steel frames

International Nuclear Information System (INIS)

Butala, M.B.; Jones, W.D.; Beavers, J.E.

1991-01-01

Several Buildings at the Department of Energy (DOE) Oak Ridge Y-1 2 Plant rely on unreinforced hollow clay tile walls (HCTW) infilled between unbraced, non-moment resisting steel frames to resist natural phenomena forces, seismic and wind. One critical building relies on moment resisting steel frames in one direction while relying on unreinforced HCTWs infilled between the columns in the orthogonal direction to resist these forces. The HCTWs must act as shear walls while maintaining out-of-plane lateral stability. In assessing the safety of these buildings to seismic forces, several models to study the in- and out-of-plane effects were made and analyzed. The study of the moment resisting steel framed building indicated that bending stresses in the walls were induced by building drift and not by inertial forces per se. The discovery of this phenomenon was some what of a surprise in that the analysis performed is not typically used in design of these structures. The study indicated that the walls began to crack at their interface with the foundation at a low open-quotes gclose quotes level and that horizontal cracking at different elevations continued until the walls exhibited little bending resistance

Effect of Various Interface Thicknesses on the Behaviour of Infilled frame Subjected to Lateral Load

Science.gov (United States)

Senthil, K.; Muthukumar, S.; Rupali, S.; Satyanarayanan, K. S.

2018-03-01

Two dimensional numerical investigations were carried out to study the influence of interface thickness on the behaviour of reinforced concrete frames subjected to in-plane lateral loads using commercial finite element tool SAP 2000. The cement mortar, cork and foam was used as interface material and their effect was studied by varying thicknesses as 6, 8, 10, 14 and 20 mm. The effect of lateral loads on infill masonry wall was also studied by varying arbitrary loads as 10, 20, 40 and 60 kN. The resistance of the frame with cement mortar was found maximum with the interface thickness 10 mm therefore, it is concluded that the maximum influence of interface thickness of 10 mm was found effective. The resistance of integral infill frame with cork and foam interface was found maximum with the interface thickness 6 mm and it is concluded that 6 mm thick interface among the chosen thickness was found effective.

Experiments and FE-model for a connection between steel frames and precast concrete infill panels (Stuttgart)

NARCIS (Netherlands)

Teeuwen, P.A; Kleinman, C.S.; Snijder, H.H.; Hofmeyer, H.; Eligehausen, R.; Fuchs, W.; Genesio, G.; Grosser, P.

2007-01-01

The paper presents experimental and FE results of investigations into the structural behaviour of a connection between steel frames and precast concrete infill panels, forming a recently developed lateral load resisting system. The discrete connections, being structural bolts on the column and beam

Mechanical characterization and force-displacement hysteretic curves from in-plane cyclic tests on strong masonry infills

Directory of Open Access Journals (Sweden)

Paolo Morandi

2018-02-01

Full Text Available This article contains information related to a recent study “Performance-based interpretation of in-plane cyclic tests on RC frames with strong masonry infills” (Morandi et al., 2017 [1]. Motivated by the necessity to improve the knowledge of the in-plane seismic response of rigid strong masonry infills, a wide experimental campaign based on in-plane cyclic tests on full-scale RC infilled frame specimens, supplemented with a complete characterization of the materials, has been conducted at the laboratory of the Department of Civil Engineering and Architecture of the University of Pavia. The masonry is constituted by vertically perforated 35 cm thick clay units with tongue and groove and dry head-joints and general-purpose mortar bed-joints. The paper reports the results of the mechanical characterization and of the force-displacement hysteretic curves from the in-plane cyclic tests.

Full-scale testing of infilled steel frames with precast concrete panels provided with a window opening

NARCIS (Netherlands)

Teeuwen, P.A; Kleinman, C.S.; Snijder, H.H.; Hofmeyer, H.

2008-01-01

As an alternative to conventional structures for tall buildings, a hybrid lateral load resisting building system has been designed, enabling the assembly of tall buildings directly from truck. It consists of steel frames with discretely connected precast concrete infill panels provided with a window

Anthropogenic infilling of a Bermudian sinkhole and its impact on sedimentation and benthic foraminifera in the adjacent anchialine cave environment

Directory of Open Access Journals (Sweden)

Jacquelyn N. Cresswell

2017-09-01

Full Text Available In the mid-20th century, an inland brackish pond from Bermuda, known as Eve’s Pond, was filled with marine sediment from an adjacent coastal lagoon. At this time, an eyewitness reported “…sediment billowing out of the Green Bay Cave for days…”, which is a marine-dominated anchialine cave located proximal to the former location of Eve’s Pond (~200 m. The purpose of this study was to evaluate the potential impact of this infilling event on cave sedimentation and benthic meiofaunal communities, as proxied by the unicellular protists foraminifera that remain preserved in the sediment record. Eight sediment cores were collected from an underwater passage in Green Bay Cave in a transect towards the location where Eve’s Pond was surveyed in 1901 CE. The sediment cores were analyzed for visual and density changes (photography, X-radiography, textural variability, benthic foraminifera fauna and diversity, and radiocarbon dating. The recovered sediment cores mostly sampled a late Holocene carbonate mud facies that had been described during previous research in the cave, with benthic foraminiferal assemblages post-dating the onset of seawater circulating between the saline groundwater flooding the cave and the adjacent Harrington Sound ~1,900 years ago. However, two cores located further into the cave (cores 13 and 17 contain a carbonate sand layer with lagoon foraminifera that is anomalous with respect to the Holocene depositional history of the cave and is most likely related to the mid-20th century infilling of Eve’s Pond. Examination of these two cores showed that after the infilling event, the community of benthic foraminifera rapidly reverted to pre-impact assemblages with foraminiferal stygophiles (e.g., Spirophthalmidium emaciatum, Sigmoilina tenuis, which were not displaced by new colonizers introduced into the cave by the dredge spoils. We caution that the results cannot be extrapolated to the pelagic crustacean community, but the

Self-supporting rhombic infill structures for additive manufacturing

DEFF Research Database (Denmark)

Wu, Jun; Wang, Charlie C.L.; Zhang, Xiaoting

2016-01-01

Recent work has demonstrated that the interior material layout of a 3D model can be designed to make a fabricated replica satisfy application-specific demands on its physical properties, such as resistance to external loads. A widely used practice to fabricate such models is by layer-based additive...... manufacturing (AM), which however suffers from the problem of adding and removing interior supporting structures. In this paper, we present a novel method for generating application-specific infill structures on rhombic cells so that the resultant structures can automatically satisfy manufacturing requirements...... on overhang-angle and wall-thickness. Additional supporting structures can be avoided entirely in our framework. To achieve this, we introduce the usage of an adaptive rhombic grid, which is built from an input surface model. Starting from the initial sparse set of rhombic cells, via numerical optimization...

Neogene basin infilling from cosmogenic nuclides (10Be and 21Ne) in Atacama, Chile

Science.gov (United States)

Sanchez, Caroline; Regard, Vincent; Carretier, Sébastien; Riquelme, Rodrigo; Blard, Pierre-Henri; Campos, Eduardo; Brichau, Stéphanie; Lupker, Marteen; Hérail, Gérard

2017-04-01

In the hyperarid Atacama Desert, northern Chile, Neogene sediments host copper rich layers (exotic supergene mineralization). Current mines are excavated into relatively thin (production (quickly decreasing with depth) and disintegration (not for 21Ne). Sampling depths are at ˜100 m and at ˜50 m below the desert surface. First, 21Ne gives lower boundaries for upstream erosion rates or local sedimentation rate. These bounds are between 2 and 10 m/Ma, which is quite important for the area. The ratio between the two cosmogenic nuclides indicate a maximum burial age of 12 Ma (minimal erosion rate of 15 m/Ma) and is surprisingly similar from bottom to top, indicating a probable rapid infilling. We finally processed a Monte-Carlo inversion. This inversion helps taking into account the post-deposition muonic production of cosmogenic nuclides. Inversion results is dependent on the muonic production scheme. Interestingly, the similarity in concentrations from bottom to top pleads for quite low production at depth. Our data finally indicates a quick infilling between 12.5 and 10 Ma BP accounting for ˜100 m of deposition (minimum sedimentation rate of 40 m/Ma).

Sediment-infill volcanic breccia from the Neoarchean Shimoga greenstone terrane, western Dharwar Craton: Implications on pyroclastic volcanism and sedimentation in an active continental margin

Science.gov (United States)

Manikyamba, C.; Saha, Abhishek; Ganguly, Sohini; Santosh, M.; Lingadevaru, M.; Rajanikanta Singh, M.; Subba Rao, D. V.

2014-12-01

We report sediment-infill volcanic breccia from the Neoarchean Shimoga greenstone belt of western Dharwar Craton which is associated with rhyolites, chlorite schists and pyroclastic rocks. The pyroclastic rocks of Yalavadahalli area of Shimoga greenstone belt host volcanogenic Pb-Cu-Zn mineralization. The sediment-infill volcanic breccia is clast-supported and comprises angular to sub-angular felsic volcanic clasts embedded in a dolomitic matrix that infilled the spaces in between the framework of volcanic clasts. The volcanic clasts are essentially composed of alkali feldspar and quartz with accessory biotite and opaques. These clasts have geochemical characteristics consistent with that of the associated potassic rhyolites from Daginkatte Formation. The rare earth elements (REE) and high field strength element (HFSE) compositions of the sediment-infill volcanic breccia and associated mafic and felsic volcanic rocks suggest an active continental margin setting for their generation. Origin, transport and deposition of these rhyolitic clasts and their aggregation with infiltrated carbonate sediments may be attributed to pyroclastic volcanism, short distance transportation of felsic volcanic clasts and their deposition in a shallow marine shelf in an active continental margin tectonic setting where the rhyolitic clasts were cemented by carbonate material. This unique rock type, marked by close association of pyroclastic volcanic rocks and shallow marine shelf sediments, suggest shorter distance between the ridge and shelf in the Neoarchean plate tectonic scenario.

Topology optimization of structures and infill for additive manufacturing

DEFF Research Database (Denmark)

Sigmund, Ole; Clausen, Anders; Groen, Jeroen Peter

Topology optimization (TO) [1] is a widely used tool for generating optimal structures for subsequent realization by additive manufacturing (AM) methods. TO is a numerical method that, based on iterated finite element analyses, gradient-based optimization algorithms and design parameterizations...... described by point clouds, delivers optimal but often rather complex topologies. As such, TO is a design method that takes full advantage of the large design freedom offered by AM technologies. Much recent effortin the TO community has been devoted to the development of algorithms that take manufacturing...... as a design gimmick to illustrate the capabilities of AM to mimic natural creations like honeycombs and bonestructure. Partly for manufacturing reasons, infill microstructure is often built as open-walled foam structures. However, as maybe unknown by many, open-walled microstructures are not optimal...

INFIL1D: a quasi-analytical model for simulating one-dimensional, constant flux infiltration

International Nuclear Information System (INIS)

Simmons, C.S.; McKeon, T.J.

1984-04-01

The program INFIL1D is designed to calculate approximate wetting-front advance into an unsaturated, uniformly moist, homogeneous soil profile, under constant surface-flux conditions. The code is based on a quasi-analytical method, which utilizes an assumed invariant functional relationship between reduced (normalized) flux and water content. The code uses general hydraulic property data in tabular form to simulate constant surface-flux infiltration. 10 references, 4 figures

Development of infill drilling recovery models for carbonates reservoirs using neural networks and multivariate statistical as a novel method

International Nuclear Information System (INIS)

Soto, R; Wu, Ch. H; Bubela, A M

1999-01-01

This work introduces a novel methodology to improve reservoir characterization models. In this methodology we integrated multivariate statistical analyses, and neural network models for forecasting the infill drilling ultimate oil recovery from reservoirs in San Andres and Clearfork carbonate formations in west Texas. Development of the oil recovery forecast models help us to understand the relative importance of dominant reservoir characteristics and operational variables, reproduce recoveries for units included in the database, forecast recoveries for possible new units in similar geological setting, and make operational (infill drilling) decisions. The variety of applications demands the creation of multiple recovery forecast models. We have developed intelligent software (Soto, 1998), oilfield intelligence (01), as an engineering tool to improve the characterization of oil and gas reservoirs. 01 integrates neural networks and multivariate statistical analysis. It is composed of five main subsystems: data input, preprocessing, architecture design, graphic design, and inference engine modules. One of the challenges in this research was to identify the dominant and the optimum number of independent variables. The variables include porosity, permeability, water saturation, depth, area, net thickness, gross thickness, formation volume factor, pressure, viscosity, API gravity, number of wells in initial water flooding, number of wells for primary recovery, number of infill wells over the initial water flooding, PRUR, IWUR, and IDUR. Multivariate principal component analysis is used to identify the dominant and the optimum number of independent variables. We compared the results from neural network models with the non-parametric approach. The advantage of the non-parametric regression is that it is easy to use. The disadvantage is that it retains a large variance of forecast results for a particular data set. We also used neural network concepts to develop recovery

Application of the local-to-global approach to the study of infilled frame structures under seismic loading

International Nuclear Information System (INIS)

Combescure, D.

2000-01-01

The seismic performance of civil engineering structures may be estimated by using two levels of modelling. At the local level, each constituent has its own constitutive law and geometric finite element support. The main phenomena such as the cracking and the crushing of concrete and masonry could be reproduced by using the continuous damage or plasticity theories. However the cost of the computations does not allow extensive or dynamic studies and thus the global level - where the constitutive laws based on empirical rules reproduce the behaviour of the structural elements - represents the unique strategy for the analysis of complete civil engineering structures under seismic loading. The present paper aims at presenting the application of these two modelling levels in order to assess the seismic performance of masonry infilled R/C frame structures. The one-bay masonry infilled frames tested at Lisbon under cyclic loading and the four-storey building tested at ELSA have been used for the validation of the modelling approach. (orig.)

Crater relaxation on Titan aided by low thermal conductivity sand infill

Science.gov (United States)

Schurmeier, Lauren R.; Dombard, Andrew J.

2018-05-01

Titan's few impact craters are currently many hundreds of meters shallower than the depths expected. Assuming these craters initially had depths equal to that of similar-size fresh craters on Ganymede and Callisto (moons of similar size, composition, and target lithology), then some process has shallowed them over time. Since nearly all of Titan's recognized craters are located within the arid equatorial sand seas of organic-rich dunes, where rain is infrequent, and atmospheric sedimentation is expected to be low, it has been suggested that aeolian infill plays a major role in shallowing the craters. Topographic relaxation at Titan's current heat flow was previously assumed to be an unimportant process on Titan due to its low surface temperature (94 K). However, our estimate of the thermal conductivity of Titan's organic-rich sand is remarkably low (0.025 W m-1 K-1), and when in thick deposits, will result in a thermal blanketing effect that can aid relaxation. Here, we simulate the relaxation of Titan's craters Afekan, Soi, and Sinlap including thermal effects of various amounts of sand inside and around Titan's craters. We find that the combination of aeolian infill and subsequent relaxation can produce the current crater depths in a geologically reasonable period of time using Titan's current heat flow. Instead of needing to fill completely the missing volume with 100% sand, only ∼62%, ∼71%, and ∼97%, of the volume need be sand at the current basal heat flux for Afekan, Soi, and Sinlap, respectively. We conclude that both processes are likely at work shallowing these craters, and this finding contributes to why Titan overall lacks impact craters in the arid equatorial regions.

Widespread infilling of tidal channels and navigable waterways in human-modified tidal deltaplain of southwest Bangladesh

Directory of Open Access Journals (Sweden)

Carol Wilson

2017-12-01

Full Text Available Since the 1960s, ~5000 km2 of tidal deltaplain in southwest Bangladesh has been embanked and converted to densely inhabited, agricultural islands (i.e., polders. This landscape is juxtaposed to the adjacent Sundarbans, a pristine mangrove forest, both well connected by a dense network of tidal channels that effectively convey water and sediment throughout the region. The extensive embanking in poldered areas, however, has greatly reduced the tidal prism (i.e., volume of water transported through local channels. We reveal that >600 km of these major waterways have infilled in recent decades, converting to land through enhanced sedimentation and the direct blocking of waterways by embankments and sluice gates. Nearly all of the observed closures (~98% have occurred along the embanked polder systems, with no comparable changes occurring in channels of the Sundarbans (<2% change. We attribute most of the channel infilling to the local reduction of tidal prism in poldered areas and the associated decline in current velocities. The infilled channels account for ~90 km2 of new land in the last 40–50 years, the rate of which, ~2 km2/yr, offsets the 4 km2/yr that is eroded at the coast, and is equivalent to ~20% of the new land produced naturally at the Ganges-Brahmaputra tidal rivermouth. Most of this new land, called ‘khas’ in Bengali, has been reclaimed for agriculture or aquaculture, contributing to the local economy. However, benefits are tempered by the loss of navigable waterways for commerce, transportation, and fishing, as well as the forced rerouting of tidal waters and sediments necessary to sustain this low-lying landscape against rising sea level. A more sustainable delta will require detailed knowledge of the consequences of these hydrodynamic changes to support more scientifically-grounded management of water, sediment, and tidal energy distribution.

Modeling the Sedimentary Infill of Lakes in the East African Rift: A Case Study of Multiple versus Single Rift Basin Segments

Science.gov (United States)

Zhang, C.; Scholz, C. A.

2016-12-01

The sedimentary basins in the East African Rift are considered excellent modern examples for investigating sedimentary infilling and evolution of extensional systems. Some lakes in the western branch of the rift have formed within single-segment systems, and include Lake Albert and Lake Edward. The largest and oldest lakes developed within multi-segment systems, and these include Lake Tanganyika and Lake Malawi. This research aims to explore processes of erosion and sedimentary infilling of the catchment area in single-segment rift (SSR) and multi-segment rift (MSR) systems. We consider different conditions of regional precipitation and evaporation, and assess the resulting facies architecture through forward modeling, using state-of-the-art commercial basin modeling software. Dionisos is a three-dimensional numerical stratigraphic forward modeling software program, which simulates basin-scale sediment transport based on empirical water- and gravity-driven diffusion equations. It was classically used to quantify the sedimentary architecture and basin infilling of both marine siliciclastic and carbonate environments. However, we apply this approach to continental rift basin environments. In this research, two scenarios are developed, one for a MSR and the other for a SSR. The modeled systems simulate the ratio of drainage area and lake surface area observed in modern Lake Tanganyika and Lake Albert, which are examples of MSRs and SSRs, respectively. The main parameters, such as maximum subsidence rate, water- and gravity-driven diffusion coefficients, rainfall, and evaporation, are approximated using these real-world examples. The results of 5 million year model runs with 50,000 year time steps show that MSRs are characterized by a deep water lake with relatively modest sediment accumulation, while the SSRs are characterized by a nearly overfilled lake with shallow water depths and thick sediment accumulation. The preliminary modeling results conform to the features

Assessing artificial neural networks and statistical methods for infilling missing soil moisture records

Science.gov (United States)

Dumedah, Gift; Walker, Jeffrey P.; Chik, Li

2014-07-01

Soil moisture information is critically important for water management operations including flood forecasting, drought monitoring, and groundwater recharge estimation. While an accurate and continuous record of soil moisture is required for these applications, the available soil moisture data, in practice, is typically fraught with missing values. There are a wide range of methods available to infilling hydrologic variables, but a thorough inter-comparison between statistical methods and artificial neural networks has not been made. This study examines 5 statistical methods including monthly averages, weighted Pearson correlation coefficient, a method based on temporal stability of soil moisture, and a weighted merging of the three methods, together with a method based on the concept of rough sets. Additionally, 9 artificial neural networks are examined, broadly categorized into feedforward, dynamic, and radial basis networks. These 14 infilling methods were used to estimate missing soil moisture records and subsequently validated against known values for 13 soil moisture monitoring stations for three different soil layer depths in the Yanco region in southeast Australia. The evaluation results show that the top three highest performing methods are the nonlinear autoregressive neural network, rough sets method, and monthly replacement. A high estimation accuracy (root mean square error (RMSE) of about 0.03 m/m) was found in the nonlinear autoregressive network, due to its regression based dynamic network which allows feedback connections through discrete-time estimation. An equally high accuracy (0.05 m/m RMSE) in the rough sets procedure illustrates the important role of temporal persistence of soil moisture, with the capability to account for different soil moisture conditions.

Durability of Geopolymer Lightweight Concrete Infilled LECA in Seawater Exposure

Science.gov (United States)

Razak, R. A.; Abdullah, M. M. A. B.; Yahya, Z.; Hamid, M. S. A.

2017-11-01

This paper describes a development of lightweight concrete using lightweight expanded clay aggregate (LECA) in fly ash (FA) based geopolymer immersed in seawater. The objective of this research is to compare the performance of geopolymer concrete (GPC) with ordinary Portland cement (OPC) concrete infilled lightweight expanded clay aggregate (LECA) in seawater exposure. Geopolymer concrete is produced by using alkaline activator to activate the raw material, FA. The highest compressive strength of this study is 42.0 MPa at 28 days and 49.8 MPa at 60 days. The density for this concrete is in the range of 1580 kg/m3 to 1660 kg/m3. The result for water absorption is in the range of 6.82% to 14.72%. However, the test results of weight loss is in the range between 0.30% to 0.43%.

Socioeconomic Impact of Infill Drilling Recovery from Carbonate Reservoirs in the Permian Basin, West Texas

Science.gov (United States)

1994-05-01

called corporate income tax . The aforementioned taxes are computed from the infill drilling recovery revenue calculated using an oil price ranging...production is not used in these computations. However, oil and gas production is used to compute the federal corporate income tax . 6.2 Advalorem Tax Revenue...billion of the corporate income tax collected in 1992. This is a humbling fact because one can see how much effort it takes to generate 0.17% of the

Holocene evolution of the Tonle Sap Lake: valley network infill and rates of sedimentation in Cambodia's Great Lake

Science.gov (United States)

Best, J.; Darby, S. E.; Langdon, P. G.; Hackney, C. R.; Leyland, J.; Parsons, D. R.; Aalto, R. E.; Marti, M.

2017-12-01

Tonle Sap Lake, the largest freshwater lake in SE Asia (c. 120km long and 35 km wide), is a vital ecosystem that provides 40-60% of the protein for the population of Cambodia. The lake is fed by flow from the Mekong River that causes the lake rise in level by c. 8m during monsoonal and cyclone-related floods, with drainage of the lake following the monsoon. Hydropower dam construction on the Mekong River has raised concerns as to the fragility of the Tonle Sap habitat due to any changing water levels and sedimentation rates within the lake. This paper details results of sub-bottom profiling surveys of Tonle Sap Lake in October 2014 that detailed the stratigraphy of the lake and assessed rates of infill. An Innomar Parametric Echo Sounder (PES) was used to obtain c. 250 km of sub-bottom profiles, with penetration up to 15m below the lake bed at a vertical resolution of c. 0.20m. These PES profiles were linked to cores from the north of the lake and previous literature. The PES profiles reveal a network of valleys, likely LGM, with relief up to c. 15-20m, that have been infilled by a suite of Holocene sediments. The valley surface is picked out as a strong reflector throughout the lake, and displays a series of valleys that are up to c. 15m deep and commonly 50-200m wide, although some of the largest valleys are 1.2km in width. Modelling of channel network incision during LGM conditions generates landscapes consistent with our field observations. The Tonle Sap valley network is infilled by sediments that show firstly fluvial and/or subaerial slope sedimentation, and then by extensive, parallel-bedded, lacustrine sedimentation. Lastly, the top c. 1m of sedimentation is marked by a distinct basal erosional surface that can be traced over much of the Tonle Sap Lake, and that is overlain by a series of parallel PES reflections. This upper sediment layer is interpreted to represent sedimentation in the Tonle Sap lake due to sediment suspension settling but after a period

Repeated catastrophic valley infill following medieval earthquakes in the Nepal Himalaya

Science.gov (United States)

Schwanghart, Wolfgang; Bernhardt, Anne; Stolle, Amelie; Hoelzmann, Philipp; Adhikari, Basanta R.; Andermann, Christoff; Tofelde, Stefanie; Merchel, Silke; Rugel, Georg; Fort, Monique; Korup, Oliver

2016-01-01

Geomorphic footprints of past large Himalayan earthquakes are elusive, although they are urgently needed for gauging and predicting recovery times of seismically perturbed mountain landscapes. We present evidence of catastrophic valley infill following at least three medieval earthquakes in the Nepal Himalaya. Radiocarbon dates from peat beds, plant macrofossils, and humic silts in fine-grained tributary sediments near Pokhara, Nepal’s second-largest city, match the timing of nearby M > 8 earthquakes in ~1100, 1255, and 1344 C.E. The upstream dip of tributary valley fills and x-ray fluorescence spectrometry of their provenance rule out local sources. Instead, geomorphic and sedimentary evidence is consistent with catastrophic fluvial aggradation and debris flows that had plugged several tributaries with tens of meters of calcareous sediment from a Higher Himalayan source >60 kilometers away.

Recording of the Holocene sediment infilling in a confined tide-dominated estuary: the bay of Brest (Britanny, France)

Science.gov (United States)

Gregoire, Gwendoline; Le Roy, Pascal; Ehrhold, Axel; Jouet, Gwenael; Garlan, Thierry

2016-04-01

ravinement surface (about 7000 cal B.P.) creates a major erosion of the levees and forms gullies on the tidal flat. The second unit is topped by the maximum flooding surface (MFS) and is characterised by shelly coarser sediments. It represents an episode of condensed sedimentation from about 4800 to 4000 cal B.P in the sheltered area, while tidal banks grew in the preserved paleo-channels. The high system tract (HST), dated from 2800 cal B.P to the present day, is formed by a muddy facies laminated with maerl bed (calcareous algae) and mixed with invasive fauna. Draping the previous units, it is interpreted as a prograding system that reflected an increasing fluvial influx potentially linked with the human activities. Our results support that the rate of sea-level rise, the tidal hydrodynamic and bedrock/coastal morphology are the main key-factors that control the infilling architecture of the bay of Brest in the Holocene time scale.

Infill Optimization for Additive Manufacturing-Approaching Bone-Like Porous Structures.

Science.gov (United States)

Wu, Jun; Aage, Niels; Westermann, Rudiger; Sigmund, Ole

2018-02-01

Porous structures such as trabecular bone are widely seen in nature. These structures are lightweight and exhibit strong mechanical properties. In this paper, we present a method to generate bone-like porous structures as lightweight infill for additive manufacturing. Our method builds upon and extends voxel-wise topology optimization. In particular, for the purpose of generating sparse yet stable structures distributed in the interior of a given shape, we propose upper bounds on the localized material volume in the proximity of each voxel in the design domain. We then aggregate the local per-voxel constraints by their p-norm into an equivalent global constraint, in order to facilitate an efficient optimization process. Implemented on a high-resolution topology optimization framework, our results demonstrate mechanically optimized, detailed porous structures which mimic those found in nature. We further show variants of the optimized structures subject to different design specifications, and we analyze the optimality and robustness of the obtained structures.

Rubber bearing and bitumen infill support system for seismic protection of nuclear power plant structures

International Nuclear Information System (INIS)

Ahmed, K.M.

1981-01-01

The prestressed concrete pressure vessel (PCPV) for the AGR is of cylindrical type. The whole of the reactor primary circuit is contained within the PCPV vault and includes the reactor core and support structures, boilers and gas circulators. The PCPV is essentially free standing on its foundation raft. In order to transmit gravitational and seismic loads between the PCPV and the foundation raft, a support system is used which consists of concentric rings of neoprene pads and a thin annulus of bitumen infill. In order to assess the importance of both stiffness and damping of the PCPV support system on the overall AGR response, detailed parametric studies were carried out using time-history dynamic analysis in conjunction with the modal superposition technique. The effects of both stiffness and damping are compared in terms of the maximum dynamic response (maximum accelerations and maximum relative displacements) and also floor response spectra at various locations on the nuclear island. It is clearly apparent from these investigations that for an appropriate range of structures on the nuclear island (such as the PCPV and its internals), greater reduction in seismic loading can be achieved by proper selection of stiffnesses and damping of the PCPV support system without resorting to strengthening techniques. (orig./HP)

Repeated catastrophic valley infill following medieval earthquakes in the Nepal Himalaya.

Science.gov (United States)

Schwanghart, Wolfgang; Bernhardt, Anne; Stolle, Amelie; Hoelzmann, Philipp; Adhikari, Basanta R; Andermann, Christoff; Tofelde, Stefanie; Merchel, Silke; Rugel, Georg; Fort, Monique; Korup, Oliver

2016-01-08

Geomorphic footprints of past large Himalayan earthquakes are elusive, although they are urgently needed for gauging and predicting recovery times of seismically perturbed mountain landscapes. We present evidence of catastrophic valley infill following at least three medieval earthquakes in the Nepal Himalaya. Radiocarbon dates from peat beds, plant macrofossils, and humic silts in fine-grained tributary sediments near Pokhara, Nepal's second-largest city, match the timing of nearby M > 8 earthquakes in ~1100, 1255, and 1344 C.E. The upstream dip of tributary valley fills and x-ray fluorescence spectrometry of their provenance rule out local sources. Instead, geomorphic and sedimentary evidence is consistent with catastrophic fluvial aggradation and debris flows that had plugged several tributaries with tens of meters of calcareous sediment from a Higher Himalayan source >60 kilometers away. Copyright © 2016, American Association for the Advancement of Science.

An environmental reconstruction of the sediment infill of the Bogota basin (Columbia) during the last 3 million years from abiotic and biotic proxies

NARCIS (Netherlands)

Torres, V.; Vandenberghe, J.; Hooghiemstra, H.

2005-01-01

The lacustrine sediments of the intramontane basin of Bogotá (4°N, 2550 m altitude) were collected in a 586-m deep core Funza-2. Absolute datings show sediment infill started c. 3.2 Ma and continued almost without interruptions as a result of the balance between tectonic subsidence and sediment

Fractures and fracture infillings of the Eye-Dashwa Lakes pluton, Atikokan, Ontario

International Nuclear Information System (INIS)

Stone, Denver; Kamineni, D.C.

1982-01-01

Fractures in the Eye-Dashwa pluton near Atikokan, Ontario can be subdivided on the basis of their filling materials. These materials include aplite, epidote, chlorite, and gypsum-carbonate-clay, listed in order of decreasing age established from crosscutting relations. Textues indicate that infilling occurred during fracture growth. Continuous cooling of the pluton during fracturing is inferred from the expected crystallization temperatures of fillings. Fracturing began before the pluton was completely solidified (650-600 0 C) and continued to temperatures below 100 0 C. Many fractures appear to have been sealed by the filling materials after initiation but were subsequently sheared and filled by lower temperatue materials. Apparently the majority of fractures formed during or immediately after pluton solidification and new fractures became smaller and more restricted in location as cooling progressed. Fractures and filling materials are seen as important features in assessing the possibility of movement of radionuclides in aqueous solutions away from a nuclear fuel waste repository

Analysis of an infill scenario for Rotterdam. Traffic noise, air pollution, and public health in relation to urban density and traffic of cars and bicycles

NARCIS (Netherlands)

Schaminée, S.; Rietveld, E.; Salomons, E.; Kluizenaar, Y. de; Borsboom, J.; Borst, H.; Guit, M.

2012-01-01

An analysis is presented of various elements of an infill scenario for the center of Rotterdam in the year 2030, corresponding to a population increase from about 30,000 to 60,000 inhabitants. We have implemented detailed future building designs in our software instrument Urban Strategy, and

Estimating environmental value losses from earth materials excavation and infilling for large-scale airport construction: a case of Dalian Offshore Airport, Dalian, China.

Science.gov (United States)

Yan, Hua-Kun; Wang, Nuo; Wu, Nuan; Song, Nan-Qi; Zhu, Dao-Li

2017-09-01

Large-scale airport construction removes large quantities of earth materials, resulting in serious environmental pollution and ecosystem damage. However, studies of environmental concerns caused by the materials used in airport construction are still preliminary, and those case studies on the impacts of large-scale offshore airport development are very limited. China's Dalian Offshore Airport is considered here to study the environmental value loss from 240 million m 3 of materials excavations and 21 km 2 of artificial island infillings. The findings show that the calculated annual environmental value loss for the development of the Dalian Offshore Airport is approximately US$7.75 million, including US$1.81 million and US$1.47 million of direct economic loss of timber resources and marine biology resources, respectively, and US$1.53 million and US$2.79 million value losses of forest and marine ecosystem services damaged caused by materials excavation and infilling, respectively. The conclusions of this study provide an important foundation to quantitatively analyse the environmental impact of the Dalian Offshore Airport's development and can be used as a reference for similar engineering and environment impact assessment programs.

Quantifying Sediment Characteristics and Infilling Rate within a Ship Shoal Dredge Borrow Area, Offshore Louisiana

Science.gov (United States)

Xue, Z.; Wilson, C.; Bentley, S. J.; Xu, K.; Liu, H.; Li, C.; Miner, M. D.

2017-12-01

Barrier islands provide protection to interior wetlands and maintain estuarine gradients. Mississippi River delta plain barrier islands are undergoing rapid disintegration due to high rates of subsidence and a deficit in the coastal sand supply. To mitigate for barrier island land loss, Louisiana has implemented a restoration program that intends to supplement coastal sand deficits by introducing sand from outside of the active coastal system. Inner-shelf shoals offshore Louisiana are one of the only sand resource options containing large volumes of restoration quality sand. Ship Shoal is one of these inner-shelf shoals that was produced by marine reworking of former Mississippi River Delta barrier island sediments during late Holocene time. Though indirect effects to protected areas or infrastructure adjacent to excavations have been considered, there is a paucity of observational data on their evolution. Caminada borrow area, dredged in 2013-2016 for the Caminada Headland Restoration Project, provides a valuable opportunity to validate and improve predictive models for how borrow areas evolve. In July 2017, a subbottom and bathymetric geophysical survey was conducted and sediment cores were collected to test the hypothesis that sedimentation within the excavation is affected by lateral bedload transport after initial rapid infill as slopes equilibrate. Preliminary results show the sediment within the excavation is predominantly very fine sand with isolated mud drapes. These sediments overlay older delta complex muddy strata. This contrasts strongly with other dredge pits outside of shoal areas and closer to shore, which have been infilled largely by advection of fine suspended sediments of fluvial origin. Laboratory work on cores will include laser grain size, x-ray analyses of sedimentary structures, and radiochemistry analyses for rates and age of deposition. With the knowledge of stratigraphy and sediment dynamics surrounding the dredge pit, we can quantify

Fast Formation of Conductive Material by Simultaneous Chemical Process for Infilling Through-Silicon Via

Science.gov (United States)

Kawakita, Jin; Chikyow, Toyohiro

2012-06-01

It is necessary to develop a fast and inexpensive fabrication process of vertical electric wiring by through-silicon via (TSV) technology for advanced three-dimensional semiconductor devices. In this research, a fast-forming conductive composite was successfully developed by simultaneous deposition of conductive organic polymer (polypyrrole) and metal (silver) from the liquid phase, accelerated by photoirradiation. The growth rate of the composite was 38 nm·s-1, which is more than 10 times higher than that of copper by conventional plating. The electric conductivity of the composite was 2.1×104 Ω-1·cm-1, which is on the same level as general metal conductors. In addition, the effects of reaction conditions on the growth rate and the conductivity of the composites were revealed. From these results, the infilling time of the TSV was expected to shorten from the present 2-10 h to 5-10 m.

Physics-Based Simulation and Experiment on Blast Protection of Infill Walls and Sandwich Composites Using New Generation of Nano Particle Reinforced Materials

Science.gov (United States)

Irshidat, Mohammad

A critical issue for the development of nanotechnology is our ability to understand, model, and simulate the behavior of small structures and to make the connection between nano structure properties and their macroscopic functions. Material modeling and simulation helps to understand the process, to set the objectives that could guide laboratory efforts, and to control material structures, properties, and processes at physical implementation. These capabilities are vital to engineering design at the component and systems level. In this research, experimental-computational-analytical program was employed to investigate the performance of the new generation of polymeric nano-composite materials, like nano-particle reinforced elastomeric materials (NPREM), for the protection of masonry structures against blast loads. New design tools for using these kinds of materials to protect Infill Walls (e.g. masonry walls) against blast loading were established. These tools were also extended to cover other type of panels like sandwich composites. This investigation revealed that polymeric nano composite materials are strain rate sensitive and have large amount of voids distributed randomly inside the materials. Results from blast experiments showed increase in ultimate flexural resistance achieved by both unreinforced and nano reinforced polyurea retrofit systems applied to infill masonry walls. It was also observed that a thin elastomeric coating on the interior face of the walls could be effective at minimizing the fragmentation resulting from blast. More conclusions are provided with recommended future research.

Do extra-group fertilizations increase the potential for sexual selection in male mammals?

Science.gov (United States)

Isvaran, Kavita; Sankaran, Sumithra

2017-10-01

Fertilizations by males outside the social breeding group (extra-group paternity, EGP) are widespread in birds and mammals. EGP is generally proposed to increase male reproductive skew and thereby increase the potential for sexual selection, but the generality of this relationship is unclear. We extracted data from 27 mammals in seven orders and used phylogenetic comparative methods to investigate the influence of EGP and social mating system on measures of inequality in male fertilization success, which are indices of the potential for sexual selection. We find that EGP and social mating system can predict the potential for sexual selection in mammalian populations, but only when considered jointly and not individually. EGP appears to increase the potential for sexual selection but only when the degree of social polygyny is relatively low. When social polygyny is high, EGP appears to result in a more uniform distribution of reproduction and a decrease in the potential for sexual selection. A possible explanation to be investigated is that the phenotype of extra-group fathers differs systematically across social mating systems. Our findings have implications for the use of EGP and social mating system as indices of sexual selection in comparative analyses of trait evolution under sexual selection. © 2017 The Author(s).

Evaluation of the Nutritional Potentials of Selected Multipurpose ...

African Journals Online (AJOL)

This experiment was conducted to evaluate the nutritional potentials of selected multipurpose fodder trees for use in livestock diets. Fresh leaves from five fodder tree species notably Gmelina arborea, Leucaena leucocephala, Tectona grandis, Persea americana and Dactyledila barteri obtained from the forestry unit of Imo ...

Deprivation selectively modulates brain potentials to food pictures.

Science.gov (United States)

Stockburger, Jessica; Weike, Almut I; Hamm, Alfons O; Schupp, Harald T

2008-08-01

Event-related brain potentials (ERPs) were used to examine whether the processing of food pictures is selectively modulated by changes in the motivational state of the observer. Sixteen healthy male volunteers were tested twice 1 week apart, either after 24 hr of food deprivation or after normal food intake. ERPs were measured while participants viewed appetitive food pictures as well as standard emotional and neutral control pictures. Results show that the ERPs to food pictures in a hungry, rather than satiated, state were associated with enlarged positive potentials over posterior sensor sites in a time window of 170-310 ms poststimulus. Minimum-norm analysis suggests the enhanced processing of food cues primarily in occipito-temporo-parietal regions. In contrast, processing of standard emotional and neutral pictures was not modulated by food deprivation. Considered from the perspective of motivated attention, the selective change of food cue processing may reflect a state-dependent change in stimulus salience.

XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting

International Nuclear Information System (INIS)

Tammas-Williams, S.; Zhao, H.; Léonard, F.; Derguti, F.; Todd, I.; Prangnell, P.B.

2015-01-01

Selective Electron Beam Melting (SEBM) is a promising powder bed Additive Manufacturing technique for near-net-shape manufacture of high-value titanium components. However without post-manufacture HIPing the fatigue life of SEBM parts is currently dominated by the presence of porosity. In this study, the size, volume fraction, and spatial distribution of the pores in model samples have been characterised in 3D, using X-ray Computed Tomography, and correlated to the process variables. The average volume fraction of the pores (< 0.2%) was measured to be lower than that usually observed in competing processes, such as selective laser melting, but a strong relationship was found with the different beam strategies used to contour, and infill by hatching, a part section. The majority of pores were found to be small spherical gas pores, concentrated in the infill hatched region; this was attributed to the lower energy density and less focused beam used in the infill strategy allowing less opportunity for gas bubbles to escape the melt pool. Overall, increasing the energy density or focus of the beam was found to correlate strongly to a reduction in the level of gas porosity. Rarer irregular shaped pores were mostly located in the contour region and have been attributed to a lack of fusion between powder particles. - Graphical abstract: Display Omitted - Highlights: • Vast majority of defects detected were small spherical gas pores. • Gas bubbles trapped in the powder granules expand and coalesce in the melt pool. • Pores have been shown not to be randomly distributed. • Larger and deeper melt pools give more opportunity for gas to escape. • Minor changes to melt strategy result in significant reductions in pore population

XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting

Energy Technology Data Exchange (ETDEWEB)

Tammas-Williams, S., E-mail: Samuel.tammas-wiliams@manchester.ac.uk [School of Materials, University of Manchester, Manchester M13 9PL (United Kingdom); Department of Materials Science and Engineering, University of Sheffield, Sheffield S1 3JD (United Kingdom); Zhao, H. [School of Materials, University of Manchester, Manchester M13 9PL (United Kingdom); Department of Materials Science and Engineering, University of Sheffield, Sheffield S1 3JD (United Kingdom); Léonard, F. [School of Materials, University of Manchester, Manchester M13 9PL (United Kingdom); Derguti, F.; Todd, I. [Department of Materials Science and Engineering, University of Sheffield, Sheffield S1 3JD (United Kingdom); Prangnell, P.B. [School of Materials, University of Manchester, Manchester M13 9PL (United Kingdom)

2015-04-15

Selective Electron Beam Melting (SEBM) is a promising powder bed Additive Manufacturing technique for near-net-shape manufacture of high-value titanium components. However without post-manufacture HIPing the fatigue life of SEBM parts is currently dominated by the presence of porosity. In this study, the size, volume fraction, and spatial distribution of the pores in model samples have been characterised in 3D, using X-ray Computed Tomography, and correlated to the process variables. The average volume fraction of the pores (< 0.2%) was measured to be lower than that usually observed in competing processes, such as selective laser melting, but a strong relationship was found with the different beam strategies used to contour, and infill by hatching, a part section. The majority of pores were found to be small spherical gas pores, concentrated in the infill hatched region; this was attributed to the lower energy density and less focused beam used in the infill strategy allowing less opportunity for gas bubbles to escape the melt pool. Overall, increasing the energy density or focus of the beam was found to correlate strongly to a reduction in the level of gas porosity. Rarer irregular shaped pores were mostly located in the contour region and have been attributed to a lack of fusion between powder particles. - Graphical abstract: Display Omitted - Highlights: • Vast majority of defects detected were small spherical gas pores. • Gas bubbles trapped in the powder granules expand and coalesce in the melt pool. • Pores have been shown not to be randomly distributed. • Larger and deeper melt pools give more opportunity for gas to escape. • Minor changes to melt strategy result in significant reductions in pore population.

Neotendon infilling of a full thickness rotator cuff foot print tear following ultrasound guided liquid platelet rich plasma injection and percutaneous tenotomy: favourable outcome up to one year [v1; ref status: indexed, http://f1000r.es/xz

Directory of Open Access Journals (Sweden)

Arockia Doss

2013-01-01

Full Text Available This is a case report on excellent clinical outcome and neotendon infilling at one year follow up in a degenerative rotator cuff full thickness tear following percutaneous tenotomy and platelet rich plasma injection.

Active control of methanol carbonylation selectivity over Au/carbon anode by electrochemical potential.

Science.gov (United States)

Funakawa, Akiyasu; Yamanaka, Ichiro; Otsuka, Kiyoshi

2005-05-12

Electrochemical oxidative carbonylation of methanol was studied over Au supported carbon anode in CO. The major carbonylation products were dimethyl oxalate (DMO) and dimethyl carbonate (DMC). The minor oxidation products were dimethoxy methane (DMM) and methyl formate (MF) from methanol and CO(2). Influences of various reaction conditions were studied on carbonylation activities and selectivities. The selectivities to DMO and DMC can be controlled by the electrochemical potential. Electrocatalysis of Au/carbon anode was studied by cyclic voltammetry (CV), stoichiometric reactions among Au(3+), methanol, and CO, and UV-vis spectra. The Au/carbon anode was characterized by XRD, SEM, and BE images before and after the carbonylation. These experimental facts strongly suggest that transition of oxidation states of Au affects changing of the carbonylation selectivities to DMO and DMC. Au(0) is the active species for the selective DMO formation by direct electrochemical carbonylation at low potentials (selective DMC formation by indirect electrochemical carbonylation through Au(3+)/Au(+) redox at high potentials (>+1.3 V).

Event-related potentials during visual selective attention in children of alcoholics.

Science.gov (United States)

van der Stelt, O; Gunning, W B; Snel, J; Kok, A

1998-12-01

Event-related potentials were recorded from 7- to 18-year-old children of alcoholics (COAs, n = 50) and age- and sex-matched control children (n = 50) while they performed a visual selective attention task. The task was to attend selectively to stimuli with a specified color (red or blue) in an attempt to detect the occurrence of target stimuli. COAs manifested a smaller P3b amplitude to attended-target stimuli over the parietal and occipital scalp than did the controls. A more specific analysis indicated that both the attentional relevance and the target properties of the eliciting stimulus determined the observed P3b amplitude differences between COAs and controls. In contrast, no significant group differences were observed in attention-related earlier occurring event-related potential components, referred to as frontal selection positivity, selection negativity, and N2b. These results represent neurophysiological evidence that COAs suffer from deficits at a late (semantic) level of visual selective information processing that are unlikely a consequence of deficits at earlier (sensory) levels of selective processing. The findings support the notion that a reduced visual P3b amplitude in COAs represents a high-level processing dysfunction indicating their increased vulnerability to alcoholism.

Event-related potentials during visual selective attention in children of alcoholics.

NARCIS (Netherlands)

van der Stelt, O.; Gunning, W.B.; Snel, J.; Kok, A.

1998-01-01

Event-related potentials (ERPs) were recorded from 50 7-18 yr old children of alcoholics (COAs) and 50 age- and sex-matched control children while they performed a visual selective attention task. The task was to attend selectively to stimuli with a specified color (red or blue) in an attempt to

New developments in file-based infrastructure for ATLAS event selection

Energy Technology Data Exchange (ETDEWEB)

Gemmeren, P van; Malon, D M [Argonne National Laboratory, Argonne, Illinois 60439 (United States); Nowak, M, E-mail: gemmeren@anl.go [Brookhaven National Laboratory, Upton, NY 11973-5000 (United States)

2010-04-01

In ATLAS software, TAGs are event metadata records that can be stored in various technologies, including ROOT files and relational databases. TAGs are used to identify and extract events that satisfy certain selection predicates, which can be coded as SQL-style queries. TAG collection files support in-file metadata to store information describing all events in the collection. Event Selector functionality has been augmented to provide such collection-level metadata to subsequent algorithms. The ATLAS I/O framework has been extended to allow computational processing of TAG attributes to select or reject events without reading the event data. This capability enables physicists to use more detailed selection criteria than are feasible in an SQL query. For example, the TAGs contain enough information not only to check the number of electrons, but also to calculate their distance to the closest jet-a calculation that would be difficult to express in SQL. Another new development allows ATLAS to write TAGs directly into event data files. This feature can improve performance by supporting advanced event selection capabilities, including computational processing of TAG information, without the need for external TAG file or database access.

Deprivation selectively modulates brain potentials to food pictures

OpenAIRE

Stockburger, Jessica; Weike, Almut I.; Hamm, Alfons O.; Schupp, Harald Thomas

2008-01-01

Event-related brain potentials (ERPs) were used to examine whether the processing of food pictures is selectively modulated by changes in the motivational state of the observer. Sixteen healthy male volunteers were tested twice 1 week apart, either after 24 hr of food deprivation or after normal food intake. ERPs were measured while participants viewed appetitive food pictures as well as standard emotional and neutral control pictures. Results show that the ERPs to food pictures in a hungry, ...

Selected soil enzymes: Examples of their potential roles in the ...

African Journals Online (AJOL)

Soil enzymes regulate ecosystem functioning and in particular play a key role in nutrient cycling. In this review we briefly summarise potential roles of selected enzymes such as amylase, arylsulphatases, -glucosidase, cellulose, chitinase, dehydrogenase, phosphatase, protease and urease in the ecosystem. We also ...

Selecting for Creativity and Innovation Potential: Implications for Practice in Healthcare Education

Science.gov (United States)

Patterson, Fiona; Zibarras, Lara Dawn

2017-01-01

The ability to innovate is an important requirement in many organisations. Despite this pressing need, few selection systems in healthcare focus on identifying the potential for creativity and innovation and so this area has been vastly under-researched. As a first step towards understanding how we might select for creativity and innovation, this…

Surface-geophysical techniques used to detect existing and infilled scour holes near bridge piers

Science.gov (United States)

Placzek, Gary; Haeni, F.P.

1995-01-01

Surface-geophysical techniques were used with a position-recording system to study riverbed scour near bridge piers. From May 1989 to May 1993. Fathometers, fixed- and swept-frequency con- tinuous seismic-reflection profiling (CSP) systems, and a ground-penetrating radar (GPR) system were used with a laser-positioning system to measure the depth and extent of existing and infilled scour holes near bridge piers. Equipment was purchased commercially and modified when necessary to interface the components and (or) to improve their performance. Three 200-kHz black-and-white chart- recording Fathometers produced profiles of the riverbed that included existing scour holes and exposed pier footings. The Fathometers were used in conjunction with other geophysical techniques to help interpret the geophysical data. A 20-kHz color Fathometer delineated scour-hole geometry and, in some cases, the thickness of fill material in the hole. The signal provided subbottom information as deep as 10 ft in fine-grained materials and resolved layers of fill material as thin as 1 foot thick. Fixed-frequency and swept-frequency CSP systems were evaluated. The fixed-frequency system used a 3.5-, 7.0-, or 14-kHz signal. The 3.5-kHz signal pene- trated up to 50 ft of fine-grained material and resolved layers as thin as 2.5-ft thick. The 14-kHz signal penetrated up to 20 ft of fine-grained material and resolved layers as thin as 1-ft thick. The swept-frequency systems used a signal that swept from 2- to 16-kHz. With this system, up to 50 ft of penetration was achieved, and fill material as thin as 1 ft was resolved. Scour-hole geometry, exposed pier footings, and fill thickness in scour holes were detected with both CSP systems. The GPR system used an 80-, 100-, or 300-megahertz signal. The technique produced records in water up to 15 ft deep that had a specific conductance less than 200x11ms/cm. The 100-MHz signal penetrated up to 40 ft of resistive granular material and resolved layers as

Generalized Selectivity Description for Polymeric Ion-Selective Electrodes Based on the Phase Boundary Potential Model.

Science.gov (United States)

Bakker, Eric

2010-02-15

A generalized description of the response behavior of potentiometric polymer membrane ion-selective electrodes is presented on the basis of ion-exchange equilibrium considerations at the sample-membrane interface. This paper includes and extends on previously reported theoretical advances in a more compact yet more comprehensive form. Specifically, the phase boundary potential model is used to derive the origin of the Nernstian response behavior in a single expression, which is valid for a membrane containing any charge type and complex stoichiometry of ionophore and ion-exchanger. This forms the basis for a generalized expression of the selectivity coefficient, which may be used for the selectivity optimization of ion-selective membranes containing electrically charged and neutral ionophores of any desired stoichiometry. It is shown to reduce to expressions published previously for specialized cases, and may be effectively applied to problems relevant in modern potentiometry. The treatment is extended to mixed ion solutions, offering a comprehensive yet formally compact derivation of the response behavior of ion-selective electrodes to a mixture of ions of any desired charge. It is compared to predictions by the less accurate Nicolsky-Eisenman equation. The influence of ion fluxes or any form of electrochemical excitation is not considered here, but may be readily incorporated if an ion-exchange equilibrium at the interface may be assumed in these cases.

Colorectal cancer chemoprevention: the potential of a selective approach.

Science.gov (United States)

Ben-Amotz, Oded; Arber, Nadir; Kraus, Sarah

2010-10-01

Colorectal cancer (CRC) is a leading cause of cancer death, and therefore demands special attention. Novel recent approaches for the chemoprevention of CRC focus on selective targeting of key pathways. We review the study by Zhang and colleagues, evaluating a selective approach targeting APC-deficient premalignant cells using retinoid-based therapy and TNF-related apoptosis-inducing ligand (TRAIL). This study demonstrates that induction of TRAIL-mediated death signaling contributes to the chemopreventive value of all-trans-retinyl acetate (RAc) by sensitizing premalignant adenoma cells for apoptosis without affecting normal cells. We discuss these important findings, raise few points that deserve consideration, and may further contribute to the development of RAc-based combination therapies with improved efficacy. The authors clearly demonstrate a synergistic interaction between TRAIL, RAc and APC, which leads to the specific cell death of premalignant target cells. The study adds to the growing body of literature related to CRC chemoprevention, and provides solid data supporting a potentially selective approach for preventing CRC using RAc and TRAIL.

Decarboxylative alkylation for site-selective bioconjugation of native proteins via oxidation potentials

Science.gov (United States)

Bloom, Steven; Liu, Chun; Kölmel, Dominik K.; Qiao, Jennifer X.; Zhang, Yong; Poss, Michael A.; Ewing, William R.; MacMillan, David W. C.

2018-02-01

The advent of antibody-drug conjugates as pharmaceuticals has fuelled a need for reliable methods of site-selective protein modification that furnish homogeneous adducts. Although bioorthogonal methods that use engineered amino acids often provide an elegant solution to the question of selective functionalization, achieving homogeneity using native amino acids remains a challenge. Here, we explore visible-light-mediated single-electron transfer as a mechanism towards enabling site- and chemoselective bioconjugation. Specifically, we demonstrate the use of photoredox catalysis as a platform to selectivity wherein the discrepancy in oxidation potentials between internal versus C-terminal carboxylates can be exploited towards obtaining C-terminal functionalization exclusively. This oxidation potential-gated technology is amenable to endogenous peptides and has been successfully demonstrated on the protein insulin. As a fundamentally new approach to bioconjugation this methodology provides a blueprint toward the development of photoredox catalysis as a generic platform to target other redox-active side chains for native conjugation.

Decarboxylative alkylation for site-selective bioconjugation of native proteins via oxidation potentials.

Science.gov (United States)

Bloom, Steven; Liu, Chun; Kölmel, Dominik K; Qiao, Jennifer X; Zhang, Yong; Poss, Michael A; Ewing, William R; MacMillan, David W C

2018-02-01

The advent of antibody-drug conjugates as pharmaceuticals has fuelled a need for reliable methods of site-selective protein modification that furnish homogeneous adducts. Although bioorthogonal methods that use engineered amino acids often provide an elegant solution to the question of selective functionalization, achieving homogeneity using native amino acids remains a challenge. Here, we explore visible-light-mediated single-electron transfer as a mechanism towards enabling site- and chemoselective bioconjugation. Specifically, we demonstrate the use of photoredox catalysis as a platform to selectivity wherein the discrepancy in oxidation potentials between internal versus C-terminal carboxylates can be exploited towards obtaining C-terminal functionalization exclusively. This oxidation potential-gated technology is amenable to endogenous peptides and has been successfully demonstrated on the protein insulin. As a fundamentally new approach to bioconjugation this methodology provides a blueprint toward the development of photoredox catalysis as a generic platform to target other redox-active side chains for native conjugation.

Radio frequency selective addressing of localized atoms in a periodic potential

International Nuclear Information System (INIS)

Ott, H.; De Mirandes, E.; Ferlaino, F.; Roati, G.; Tuerck, V.; Modugno, G.; Inguscio, M.

2004-01-01

We study the localization and addressability of ultracold atoms in a combined parabolic and periodic potential. Such a potential supports the existence of localized stationary states and we show that applying a radio frequency field allows us to selectively address atoms in these states. This method is used to measure the energy and momentum distribution of the atoms in the localized states. We also discuss possible extensions of this scheme to address and manipulate atoms in single lattice sites

Potential of Genomic Selection in Mass Selection Breeding of an Allogamous Crop: An Empirical Study to Increase Yield of Common Buckwheat.

Science.gov (United States)

Yabe, Shiori; Hara, Takashi; Ueno, Mariko; Enoki, Hiroyuki; Kimura, Tatsuro; Nishimura, Satoru; Yasui, Yasuo; Ohsawa, Ryo; Iwata, Hiroyoshi

2018-01-01

To evaluate the potential of genomic selection (GS), a selection experiment with GS and phenotypic selection (PS) was performed in an allogamous crop, common buckwheat ( Fagopyrum esculentum Moench). To indirectly select for seed yield per unit area, which cannot be measured on a single-plant basis, a selection index was constructed from seven agro-morphological traits measurable on a single plant basis. Over 3 years, we performed two GS and one PS cycles per year for improvement in the selection index. In GS, a prediction model was updated every year on the basis of genotypes of 14,598-50,000 markers and phenotypes. Plants grown from seeds derived from a series of generations of GS and PS populations were evaluated for the traits in the selection index and other yield-related traits. GS resulted in a 20.9% increase and PS in a 15.0% increase in the selection index in comparison with the initial population. Although the level of linkage disequilibrium in the breeding population was low, the target trait was improved with GS. Traits with higher weights in the selection index were improved more than those with lower weights, especially when prediction accuracy was high. No trait changed in an unintended direction in either GS or PS. The accuracy of genomic prediction models built in the first cycle decreased in the later cycles because the genetic bottleneck through the selection cycles changed linkage disequilibrium patterns in the breeding population. The present study emphasizes the importance of updating models in GS and demonstrates the potential of GS in mass selection of allogamous crop species, and provided a pilot example of successful application of GS to plant breeding.

Selecting for creativity and innovation potential: implications for practice in healthcare education.

Science.gov (United States)

Patterson, Fiona; Zibarras, Lara Dawn

2017-05-01

The ability to innovate is an important requirement in many organisations. Despite this pressing need, few selection systems in healthcare focus on identifying the potential for creativity and innovation and so this area has been vastly under-researched. As a first step towards understanding how we might select for creativity and innovation, this paper explores the use of a trait-based measure of creativity and innovation potential, and evaluates its efficacy for use in selection for healthcare education. This study uses a sample of 188 postgraduate physicians applying for education and training in UK General Practice. Participants completed two questionnaires (a trait-based measure of creativity and innovation, and a measure of the Big Five personality dimensions) and were also rated by assessors on creative problem solving measured during a selection centre. In exploring the construct validity of the trait-based measure of creativity and innovation, our research clarifies the associations between personality, and creativity and innovation. In particular, our study highlights the importance of motivation in the creativity and innovation process. Results also suggest that Openness to Experience is positively related to creativity and innovation whereas some aspects of Conscientiousness are negatively associated with creativity and innovation. Results broadly support the utility of using a trait-based measure of creativity and innovation in healthcare selection processes, although practically this may be best delivered as part of an interview process, rather than as a screening tool. Findings are discussed in relation to broader implications for placing more priority on creativity and innovation as selection criteria within healthcare education and training in future.

Fracture calcites at Olkiluoto. Evidence from quaternary infills for palaeohydrogeology

International Nuclear Information System (INIS)

Gehoer, S.; Kaerki, A.; Taikina-aho, O.; Karhu, J.; Loefman, J.; Pitkaenen, P.; Ruotsalainen, P.

2002-02-01

Recently formed secondary minerals, predominantly calcite, occur in varying amounts as fracture infills, and the calcite types, their chemical compositions and isotope ratios reflect the compositions and physicochemical factors of the groundwater system in which they were formed. Fluid inclusions trapped in calcites give direct evidence of trapping temperatures and past salinities and of the chemical compositions of the palaeo fluids. A wide range of mineralogical and geochemical examinations were carried out within the EQUIP project to examine features of this kind. The fracture calcites at the Olkiluoto site are of various origins and represent several textural types. The exact number of calcite-producing events is unknown, but the duration of the period that was appropriate for the precipitation of low temperature calcite is estimated to have exceeded 1000 Ma. Thus the number of genetically related calcite units is assumed to be considerable. This study was focused on the petrogenesis of calcites crystallized in fractures of high water conductivity during the latest stages of geological evolution. The majority of these late stage calcites form physically homogeneous, scaly layers, and in a few cases thin layers composed of idiomorphic crystals. Chemically these are almost stoichiometric calcites (CaCO 3 ). The MnO content may exceed 1%, while the amounts of other elements present are minor, although the trace element concentrations, particularly those of large ionic trace elements, can be used as distinguishing features for the recognition of individual precipitates representing different calcite generations. Evidence from fluid inclusions, or more correctly from the absence of these in the late stage calcites, can be interpreted as an indication of slow rates of crystallization under cool conditions. Many chemical variables, e.g. oxygen isotope ratios, demonstrate an equilibrium between the latest calcites and water similar to the present groundwater. Older

Fracture calcites at Olkiluoto. Evidence from quaternary infills for palaeohydrogeology

Energy Technology Data Exchange (ETDEWEB)

Gehoer, S.; Kaerki, A.; Taikina-aho, O. [Kivitieto Oy (Finland); Karhu, J. [Helsinki Univ. (Finland); Loefman, J. [VTT Processes, Espoo (Finland); Pitkaenen, P. [VTT Building and Transport, Espoo (Finland); Ruotsalainen, P. [TUKES, Helsinki (Finland)

2002-02-01

Recently formed secondary minerals, predominantly calcite, occur in varying amounts as fracture infills, and the calcite types, their chemical compositions and isotope ratios reflect the compositions and physicochemical factors of the groundwater system in which they were formed. Fluid inclusions trapped in calcites give direct evidence of trapping temperatures and past salinities and of the chemical compositions of the palaeo fluids. A wide range of mineralogical and geochemical examinations were carried out within the EQUIP project to examine features of this kind. The fracture calcites at the Olkiluoto site are of various origins and represent several textural types. The exact number of calcite-producing events is unknown, but the duration of the period that was appropriate for the precipitation of low temperature calcite is estimated to have exceeded 1000 Ma. Thus the number of genetically related calcite units is assumed to be considerable. This study was focused on the petrogenesis of calcites crystallized in fractures of high water conductivity during the latest stages of geological evolution. The majority of these late stage calcites form physically homogeneous, scaly layers, and in a few cases thin layers composed of idiomorphic crystals. Chemically these are almost stoichiometric calcites (CaCO{sub 3}). The MnO content may exceed 1%, while the amounts of other elements present are minor, although the trace element concentrations, particularly those of large ionic trace elements, can be used as distinguishing features for the recognition of individual precipitates representing different calcite generations. Evidence from fluid inclusions, or more correctly from the absence of these in the late stage calcites, can be interpreted as an indication of slow rates of crystallization under cool conditions. Many chemical variables, e.g. oxygen isotope ratios, demonstrate an equilibrium between the latest calcites and water similar to the present groundwater. Older

Automated tube potential selection for standard chest and abdominal CT in follow-up patients with testicular cancer: comparison with fixed tube potential

Energy Technology Data Exchange (ETDEWEB)

Gnannt, Ralph; Winklehner, Anna; Frauenfelder, Thomas; Alkadhi, Hatem [University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland); Eberli, Daniel [University Hospital Zurich, Clinic for Urology, Zurich (Switzerland); Knuth, Alexander [University Hospital Zurich, Clinic for Oncology, Zurich (Switzerland)

2012-09-15

To evaluate prospectively, in patients with testicular cancer, the radiation dose-saving potential and image quality of contrast-enhanced chest and abdominal CT with automated tube potential selection. Forty consecutive patients with testicular cancer underwent contrast-enhanced arterio-venous chest and portal-venous abdominal CT with automated tube potential selection (protocol B; tube potential 80-140 kVp), which is based on the attenuation of the CT topogram. All had a first CT at 120 kVp (protocol A) using the same 64-section CT machine and similar settings. Image quality was assessed; dose information (CTDI{sub vol}) was noted. Image noise and attenuation in the liver and spleen were significantly higher for protocol B (P < 0.05 each), whereas attenuation in the deltoid and erector spinae muscles was similar. In protocol B, tube potential was reduced to 100 kVp in 18 chest and 33 abdominal examinations, and to 80 kVp in 5 abdominal CT examinations; it increased to 140 kVp in one patient. Image quality of examinations using both CT protocols was rated as diagnostic. CTDI{sub vol} was significantly lower for protocol B compared to protocol A (reduction by 12%, P < 0.01). In patients with testicular cancer, radiation dose of chest and abdominal CT can be reduced with automated tube potential selection, while image quality is preserved. (orig.)

Potential of Genomic Selection in Mass Selection Breeding of an Allogamous Crop: An Empirical Study to Increase Yield of Common Buckwheat

Directory of Open Access Journals (Sweden)

Shiori Yabe

2018-03-01

Full Text Available To evaluate the potential of genomic selection (GS, a selection experiment with GS and phenotypic selection (PS was performed in an allogamous crop, common buckwheat (Fagopyrum esculentum Moench. To indirectly select for seed yield per unit area, which cannot be measured on a single-plant basis, a selection index was constructed from seven agro-morphological traits measurable on a single plant basis. Over 3 years, we performed two GS and one PS cycles per year for improvement in the selection index. In GS, a prediction model was updated every year on the basis of genotypes of 14,598–50,000 markers and phenotypes. Plants grown from seeds derived from a series of generations of GS and PS populations were evaluated for the traits in the selection index and other yield-related traits. GS resulted in a 20.9% increase and PS in a 15.0% increase in the selection index in comparison with the initial population. Although the level of linkage disequilibrium in the breeding population was low, the target trait was improved with GS. Traits with higher weights in the selection index were improved more than those with lower weights, especially when prediction accuracy was high. No trait changed in an unintended direction in either GS or PS. The accuracy of genomic prediction models built in the first cycle decreased in the later cycles because the genetic bottleneck through the selection cycles changed linkage disequilibrium patterns in the breeding population. The present study emphasizes the importance of updating models in GS and demonstrates the potential of GS in mass selection of allogamous crop species, and provided a pilot example of successful application of GS to plant breeding.

Selection of potential microorganism for sago starch fermentation

Directory of Open Access Journals (Sweden)

RUTH MELLIAWATI

2006-02-01

Full Text Available Fermentation process of sago starch for the production of bioproduct requires potential microorganism that have ability to hydrolyze sago starch. The purpose of this research was to get the potential of amylolytic microorganisms for their capability of amyloglucosidase activity and to know the sugar strains of the fermentation result. Eleven amylolytic microorganisms (9 strains of mold and 2 strains of yeast were obtained from the collection Research Centre for Biotechnology – Indonesian Institute of Sciences (LIPI, Cibinong-Bogor were used. The selection step was carried out based on their capability of starch hydrolysis to reducing sugar. The best result indicates that the production of reducing sugar reached the highest 18.485 ppm and amyloglucosidase activities was 3.583 units by KTU-1 strain. The highest total acid obtained was 5.85 mg/mL by Rhizopus IFO.R5442. The cell biomass was obtained between 0.5 to 1.74 g dry weight/100 mL and pH of the final fermentation (72 h were 3.57 to 8.38.

Copolymers enhance selective bacterial community colonization for potential root zone applications.

Science.gov (United States)

Pham, Vy T H; Murugaraj, Pandiyan; Mathes, Falko; Tan, Boon K; Truong, Vi Khanh; Murphy, Daniel V; Mainwaring, David E

2017-11-21

Managing the impact of anthropogenic and climate induced stress on plant growth remains a challenge. Here we show that polymeric hydrogels, which maintain their hydrous state, can be designed to exploit functional interactions with soil microorganisms. This microbial enhancement may mitigate biotic and abiotic stresses limiting productivity. The presence of mannan chains within synthetic polyacrylic acid (PAA) enhanced the dynamics and selectivity of bacterial ingress in model microbial systems and soil microcosms. Pseudomonas fluorescens exhibiting high mannan binding adhesins showed higher ingress and localised microcolonies throughout the polymeric network. In contrast, ingress of Bacillus subtilis, lacking adhesins, was unaltered by mannan showing motility comparable to bulk liquids. Incubation within microcosms of an agricultural soil yielded hydrogel populations significantly increased from the corresponding soil. Bacterial diversity was markedly higher in mannan containing hydrogels compared to both control polymer and soil, indicating enhanced selectivity towards microbial families that contain plant beneficial species. Here we propose functional polymers applied to the potential root zone which can positively influence rhizobacteria colonization and potentially plant growth as a new approach to stress tolerance.

Aragonite infill in overgrown conceptacles of coralline Lithothamnion spp. (Hapalidiaceae, Hapalidiales, Rhodophyta): new insights in biomineralization and phylomineralogy.

Science.gov (United States)

Krayesky-Self, Sherry; Richards, Joseph L; Rahmatian, Mansour; Fredericq, Suzanne

2016-04-01

New empirical and quantitative data in the study of calcium carbonate biomineralization and an expanded coralline psbA framework for phylomineralogy are provided for crustose coralline red algae. Scanning electron microscopy (SEM) and energy dispersive spectrometry (SEM-EDS) pinpointed the exact location of calcium carbonate crystals within overgrown reproductive conceptacles in rhodolith-forming Lithothamnion species from the Gulf of Mexico and Pacific Panama. SEM-EDS and X-ray diffraction (XRD) analysis confirmed the elemental composition of these calcium carbonate crystals to be aragonite. After spore release, reproductive conceptacles apparently became overgrown by new vegetative growth, a strategy that may aid in sealing the empty conceptacle chamber, hence influencing the chemistry of the microenvironment and in turn promoting aragonite crystal growth. The possible relevance of various types of calcium carbonate polymorphs present in the complex internal structure and skeleton of crustose corallines is discussed. This is the first study to link SEM, SEM-EDS, XRD, Microtomography and X-ray microscopy data of aragonite infill in coralline algae with phylomineralogy. The study contributes to the growing body of literature characterizing and speculating about how the relative abundances of carbonate biominerals in corallines may vary in response to changes in atmospheric pCO2 , ocean acidification, and global warming. © 2016 Phycological Society of America.

Recreational fishing selectively captures individuals with the highest fitness potential.

Science.gov (United States)

Sutter, David A H; Suski, Cory D; Philipp, David P; Klefoth, Thomas; Wahl, David H; Kersten, Petra; Cooke, Steven J; Arlinghaus, Robert

2012-12-18

Fisheries-induced evolution and its impact on the productivity of exploited fish stocks remains a highly contested research topic in applied fish evolution and fisheries science. Although many quantitative models assume that larger, more fecund fish are preferentially removed by fishing, there is no empirical evidence describing the relationship between vulnerability to capture and individual reproductive fitness in the wild. Using males from two lines of largemouth bass (Micropterus salmoides) selectively bred over three generations for either high (HV) or low (LV) vulnerability to angling as a model system, we show that the trait "vulnerability to angling" positively correlates with aggression, intensity of parental care, and reproductive fitness. The difference in reproductive fitness between HV and LV fish was particularly evident among larger males, which are also the preferred mating partners of females. Our study constitutes experimental evidence that recreational angling selectively captures individuals with the highest potential for reproductive fitness. Our study further suggests that selective removal of the fittest individuals likely occurs in many fisheries that target species engaged in parental care. As a result, depending on the ecological context, angling-induced selection may have negative consequences for recruitment within wild populations of largemouth bass and possibly other exploited species in which behavioral patterns that determine fitness, such as aggression or parental care, also affect their vulnerability to fishing gear.

Infilling and flooding of the Mekong River incised valley during deglacial sea-level rise

Science.gov (United States)

Tjallingii, Rik; Stattegger, Karl; Wetzel, Andreas; Van Phach, Phung

2010-06-01

The abrupt transition from fluvial to marine deposition of incised-valley-fill sediments retrieved from the southeast Vietnamese shelf, accurately records the postglacial transgression after 14 ka before present (BP). Valley-filling sediments consist of fluvial mud, whereas sedimentation after the transgression is characterized by shallow-marine carbonate sands. This change in sediment composition is accurately marked in high-resolution X-ray fluorescence (XRF) core scanning records. Rapid aggradation of fluvial sediments at the river mouth nearly completely filled the Mekong incised valley prior to flooding. However, accumulation rates strongly reduced in the valley after the river-mouth system flooded and stepped back. This also affected the sediment supply to deeper parts of the southeast Vietnamese shelf. Comparison of the Mekong valley-filling with the East Asian sea-level history of sub- and inter-tidal sediment records shows that the transgressive surface preserved in the incised-valley-fill records is a robust sea-level indicator. The valley was nearly completely filled with fluvial sediments between 13.0 and 9.5 ka BP when sea-level rose rather constantly with approximately 10 mm/yr, as indicated by the East Asian sea-level record. At shallower parts of the shelf, significant sediment reworking and the establishment of estuarine conditions at the final stage of infilling complicates accurate dating of the transgressive surface. Nevertheless, incised-valley-fill records and land-based drill sites indicate a vast and rapid flooding of the shelf from the location of the modern Vietnamese coastline to the Cambodian lowlands between 9.5 ka and 8.5 ka BP. Fast flooding of this part of the shelf is related with the low shelf gradient and a strong acceleration of the East Asian sea-level rise from 34 to 9 meter below modern sea level (mbsl) corresponding to the sea-level jump of melt water pulse (MWP) 1C.

Second generation bioethanol potential from selected Malaysia's biodiversity biomasses: A review.

Science.gov (United States)

Aditiya, H B; Chong, W T; Mahlia, T M I; Sebayang, A H; Berawi, M A; Nur, Hadi

2016-01-01

Rising global temperature, worsening air quality and drastic declining of fossil fuel reserve are the inevitable phenomena from the disorganized energy management. Bioethanol is believed to clear out the effects as being an energy-derivable product sourced from renewable organic sources. Second generation bioethanol interests many researches from its unique source of inedible biomass, and this paper presents the potential of several selected biomasses from Malaysia case. As one of countries with rich biodiversity, Malaysia holds enormous potential in second generation bioethanol production from its various agricultural and forestry biomasses, which are the source of lignocellulosic and starch compounds. This paper reviews potentials of biomasses and potential ethanol yield from oil palm, paddy (rice), pineapple, banana and durian, as the common agricultural waste in the country but uncommon to be served as bioethanol feedstock, by calculating the theoretical conversion of cellulose, hemicellulose and starch components of the biomasses into bioethanol. Moreover, the potential of the biomasses as feedstock are discussed based on several reported works. Copyright © 2015 Elsevier Ltd. All rights reserved.

Selection theory of free dendritic growth in a potential flow.

Science.gov (United States)

von Kurnatowski, Martin; Grillenbeck, Thomas; Kassner, Klaus

2013-04-01

The Kruskal-Segur approach to selection theory in diffusion-limited or Laplacian growth is extended via combination with the Zauderer decomposition scheme. This way nonlinear bulk equations become tractable. To demonstrate the method, we apply it to two-dimensional crystal growth in a potential flow. We omit the simplifying approximations used in a preliminary calculation for the same system [Fischaleck, Kassner, Europhys. Lett. 81, 54004 (2008)], thus exhibiting the capability of the method to extend mathematical rigor to more complex problems than hitherto accessible.

High Density Infill in Cracks and Protrusions from the Articular Calcified Cartilage in Osteoarthritis in Standardbred Horse Carpal Bones

Directory of Open Access Journals (Sweden)

Sheila Laverty

2015-04-01

Full Text Available We studied changes in articular calcified cartilage (ACC and subchondral bone (SCB in the third carpal bones (C3 of Standardbred racehorses with naturally-occurring repetitive loading-induced osteoarthritis (OA. Two osteochondral cores were harvested from dorsal sites from each of 15 post-mortem C3 and classified as control or as showing early or advanced OA changes from visual inspection. We re-examined X-ray micro-computed tomography (µCT image sets for the presence of high-density mineral infill (HDMI in ACC cracks and possible high-density mineralized protrusions (HDMP from the ACC mineralizing (tidemark front (MF into hyaline articular cartilage (HAC. We hypothesized and we show that 20-µm µCT resolution in 10-mm diameter samples is sufficient to detect HDMI and HDMP: these are lost upon tissue decalcification for routine paraffin wax histology owing to their predominant mineral content. The findings show that µCT is sufficient to discover HDMI and HDMP, which were seen in 2/10 controls, 6/9 early OA and 8/10 advanced OA cases. This is the first report of HDMI and HDMP in the equine carpus and in the Standardbred breed and the first to rely solely on µCT. HDMP are a candidate cause for mechanical tissue destruction in OA.

Considering Future Potential Regarding Structural Diversity in Selection of Forest Reserves.

Directory of Open Access Journals (Sweden)

Johanna Lundström

Full Text Available A rich structural diversity in forests promotes biodiversity. Forests are dynamic and therefore it is crucial to consider future structural potential when selecting reserves, to make robust conservation decisions. We analyzed forests in boreal Sweden based on 17,599 National Forest Inventory (NFI plots with the main aim to understand how effectiveness of reserves depends on the time dimension in the selection process, specifically by considering future structural diversity. In the study both the economic value and future values of 15 structural variables were simulated during a 100 year period. To get a net present structural value (NPSV, a single value covering both current and future values, we used four discounting alternatives: (1 only considering present values, (2 giving equal importance to values in each of the 100 years within the planning horizon, (3 applying an annual discount rate considering the risk that values could be lost, and (4 only considering the values in year 100. The four alternatives were evaluated in a reserve selection model under budget-constrained and area-constrained selections. When selecting young forests higher structural richness could be reached at a quarter of the cost over almost twice the area in a budget-constrained selection compared to an area-constrained selection. Our results point to the importance of considering future structural diversity in the selection of forest reserves and not as is done currently to base the selection on existing values. Targeting future values increases structural diversity and implies a relatively lower cost. Further, our results show that a re-orientation from old to young forests would imply savings while offering a more extensive reserve network with high structural qualities in the future. However, caution must be raised against a drastic reorientation of the current old-forest strategy since remnants of ancient forests will need to be prioritized due to their role for

Selective formation of biphasic thin films of metal–organic frameworks by potential-controlled cathodic electrodeposition

OpenAIRE

Li, Minyuan Miller; Dinca, Mircea

2013-01-01

Cathodic electrodeposition lends itself to the formation of biphasic metal–organic framework thin films at room temperature from single deposition baths using potential bias as the main user input. Depending on the applied potential, we selectively deposit two different phases as either bulk mixtures or bilayer films.

Antioxidant potential of selected Spirulina platensis preparations.

Science.gov (United States)

Dartsch, Peter C

2008-05-01

Recent studies suggest that Spirulina, a unicellular blue-green alga, may have a variety of health benefits and therapeutic properties and is also capable of acting as an antioxidant and antiinflammatory agent. In this study, a cell-free and a cell-based test assay were used to examine the antioxidant and antiinflammatory properties of four selected Spirulina platensis preparations: (1) Biospirulina, (2) SpiruComplex, a preparation with naturally bound selenium, chromium and zinc, (3) SpiruZink, a preparation with naturally bound zinc, (4) Zinkspirulina + Acerola, a preparation with naturally bound zinc and acerola powder. The cell-free test assay used potassium superoxide as a donor for superoxide radicals, whereas the cell-based test assay used the formation of intracellular superoxide radicals of functional neutrophils upon stimulation by phorbol-12-myristate-13-acetate as a model to investigate the potential of Spirulina preparations to inactivate superoxide radicals. In accordance with the recommended daily dosage, test concentrations ranging from 50 to 1000 microg/mL were chosen. The results showed a dose-dependent inactivation of free superoxide radicals (antioxidant effect) as well as an antiinflammatory effect characterized by a dose-dependent reduction of the metabolic activity of functional neutrophils and a dose-dependent inactivation of superoxide radicals generated during an oxidative burst. The results demonstrate that the tested Spirulina preparations have a high antioxidant and antiinflammatory potential. Especially SpiruZink and Zinkspirulina + Acerola might be useful as a supportive therapeutic approach for reducing oxidative stress and/or the generation of oxygen radicals in the course of inflammatory processes.

A General Definition of the Heritable Variation that Determines the Potential of a Population to Respond to Selection

NARCIS (Netherlands)

Bijma, P.

2011-01-01

Genetic selection is a major force shaping life on earth. In classical genetic theory, response to selection is the product of the strength of selection and the additive genetic variance in a trait. The additive genetic variance reflects a population’s intrinsic potential to respond to selection.

A Potential Waste to be Selected as Media for Metal and Nutrient Removal

Science.gov (United States)

Zayadi, N.; Othman, N.; Hamdan, R.

2016-07-01

This study describes the potential of application of cassava peel, banana peel, coconut shell, and coconut coir to be selected as metal removal while limestone and steel slag for nutrient removal. The media were characterized by X-Ray Fluorescence (XRF), Fourier Transform Infrared (FTIR), Field Emission Scanning Electron Microscopy-Energy Dispersive X-Ray (FESEM-EDX), and X-Ray Powder Diffraction (XRD). The results of XRF analysis medias show the present of calcium oxide, CaO which confirm the high efficiency in adsorbing metal ions and nutrient which is in agreement with the result of XRD. The characteristics of medias by FTIR analysis also confirmed the involvement of alcohol, carboxylic, alkanes, amines and ethers which play important role to reduce ions while FESEM-EDX indicates the porous structures of study medias. The characterization analysis highlight that cassava peel and steel slag were selected as a potential media in this study.

Geotechnology and landscape ecology applied to the selection of potential forest fragments for seed harvesting.

Science.gov (United States)

Santos, Alexandre Rosa Dos; Antonio Alvares Soares Ribeiro, Carlos; de Oliveira Peluzio, Telma Machado; Esteves Peluzio, João Batista; de Queiroz, Vagner Tebaldi; Figueira Branco, Elvis Ricardo; Lorenzon, Alexandre Simões; Domingues, Getulio Fonseca; Marcatti, Gustavo Eduardo; de Castro, Nero Lemos Martins; Teixeira, Thaisa Ribeiro; Dos Santos, Gleissy Mary Amaral Dino Alves; Santos Mota, Pedro Henrique; Ferreira da Silva, Samuel; Vargas, Rozimelia; de Carvalho, José Romário; Macedo, Leandro Levate; da Silva Araújo, Cintia; de Almeida, Samira Luns Hatum

2016-12-01

The Atlantic Forest biome is recognized for its biodiversity and is one of the most threatened biomes on the planet, with forest fragmentation increasing due to uncontrolled land use, land occupation, and population growth. The most serious aspect of the forest fragmentation process is the edge effect and the loss of biodiversity. In this context, the aim of this study was to evaluate the dynamics of forest fragmentation and select potential forest fragments with a higher degree of conservation for seed harvesting in the Itapemirim river basin, Espírito Santo State, Brazil. Image classification techniques, forest landscape ecology, and multi-criteria analysis were used to evaluate the evolution of forest fragmentation to develop the landscape metric indexes, and to select potential forest fragments for seed harvesting for the years 1985 and 2013. According to the results, there was a reduction of 2.55% of the occupancy of the fragments in the basin between the years 1985 and 2013. For the years 1985 and 2013, forest fragment units 2 and 3 were spatialized with a high potential for seed harvesting, representing 6.99% and 16.01% of the total fragments, respectively. The methodology used in this study has the potential to be used to support decisions for the selection of potential fragments for seed harvesting because selecting fragments in different environments by their spatial attributes provides a greater degree of conservation, contributing to the protection and conscious management of the forests. The proposed methodology can be adapted to other areas and different biomes of the world. Copyright © 2016 Elsevier Ltd. All rights reserved.

Influences of Shear History and Infilling on the Mechanical Characteristics and Acoustic Emissions of Joints

Science.gov (United States)

Meng, Fanzhen; Zhou, Hui; Wang, Zaiquan; Zhang, Liming; Kong, Liang; Li, Shaojun; Zhang, Chuanqing

2017-08-01

Filled joints, which are characterized by high deformability and low shear strength, are among the most critical discontinuities in rock mass and may be sheared repeatedly when subject to cyclic loading. Shear tests were carried out on tension splitting joints, with soil and granular cement mortar particles used as infillings, and the effects of the shear history on the mechanical behavior and acoustic emission (AE) of clean and filled joints were studied. The maximum strength in the subsequent shears was approximately 60% of the peak strength of the first shear for a clean joint, and the friction angle degraded from 63° to 45° after the first shear. The maximum shear strength of the filled joints was lower than 35% of the peak strength of the clean joint under the same normal stress. The change in the shear strength of filled joints with the number of shearing cycles was closely related to the transformation of the shear medium. Rolling friction occurred and the shear strength was low for the granular particle-filled joint, but the strength was elevated when the particles were crushed and sliding friction occurred. The AEs were significantly reduced during the second shear for the clean joint, and the peak AEs were mainly obtained at or near the turning point of the shear stress curve for the filled joint. The AEs were the highest for the cement particle-filled joint and lowest for the dry soil-filled joint; when subjected to repeated shears, the AEs were more complex because of the continuous changes to the shear medium. The evolution of the AEs with the shear displacement can accurately reflect the shear failure mechanism during a single shear process.

Evoked potential correlates of selective attention with multi-channel auditory inputs

Science.gov (United States)

Schwent, V. L.; Hillyard, S. A.

1975-01-01

Ten subjects were presented with random, rapid sequences of four auditory tones which were separated in pitch and apparent spatial position. The N1 component of the auditory vertex evoked potential (EP) measured relative to a baseline was observed to increase with attention. It was concluded that the N1 enhancement reflects a finely tuned selective attention to one stimulus channel among several concurrent, competing channels. This EP enhancement probably increases with increased information load on the subject.

A general definition of the heritable variation that determines the potential of a population to respond to selection.

Science.gov (United States)

Bijma, Piter

2011-12-01

Genetic selection is a major force shaping life on earth. In classical genetic theory, response to selection is the product of the strength of selection and the additive genetic variance in a trait. The additive genetic variance reflects a population's intrinsic potential to respond to selection. The ordinary additive genetic variance, however, ignores the social organization of life. With social interactions among individuals, individual trait values may depend on genes in others, a phenomenon known as indirect genetic effects. Models accounting for indirect genetic effects, however, lack a general definition of heritable variation. Here I propose a general definition of the heritable variation that determines the potential of a population to respond to selection. This generalizes the concept of heritable variance to any inheritance model and level of organization. The result shows that heritable variance determining potential response to selection is the variance among individuals in the heritable quantity that determines the population mean trait value, rather than the usual additive genetic component of phenotypic variance. It follows, therefore, that heritable variance may exceed phenotypic variance among individuals, which is impossible in classical theory. This work also provides a measure of the utilization of heritable variation for response to selection and integrates two well-known models of maternal genetic effects. The result shows that relatedness between the focal individual and the individuals affecting its fitness is a key determinant of the utilization of heritable variance for response to selection.

Greenhouse gases reduction potential through consumer’s behavioral changes in terms of food-related product selection

International Nuclear Information System (INIS)

Yoshikawa, Naoki; Fujiwara, Natsumi; Nagata, Junko; Amano, Koji

2016-01-01

Highlights: • Greenhouse gases (GHG) reduction potential by shopping behavior change is analyzed. • Four scenarios related to food consumption is evaluated using life cycle assessment. • Total GHG reduction potential by four scenarios in Japan is 1367 kt-CO_2/year. • Potential reduces to 45% when considering feasible ratio of taking behavior change. • Contribution of seasonal production/consumption scenario is highest among scenarios. - Abstract: Sustainable consumption plays an important role in the mitigation of global warming and the conservation of energy. Promoting more environmentally responsible consumer behavior, especially through open communication between stakeholders, is one way to achieve low-carbon consumption. This study evaluates the potential for reducing greenhouse gas (GHG) emissions through behavioral transformation of consumers in terms of their daily shopping habits. In this context, the behavioral transformative actions pertain to certain foods and daily necessities, and are analyzed from a life cycle assessment perspective. We developed multiple product-selection scenarios to evaluate GHG emissions related to the daily purchase of commodities. Based on the life cycle assessment, we estimated the GHG emissions that result from the production and distribution of these commodities, pertaining to both the current product selection and to a possibly improved selection. The results of our study show that because of seasonal consumption patterns and energy conversion, there is a substantial potential to reduce GHG emissions resulting from out-of-season produce cultivation. The GHG reduction potential is not high for each individual commodity because diverse commodities are needed on a daily basis. However, various actions in combination could have substantial potential for reducing emissions.

Pinon and Juniper Field Guide: Asking the Right Questions to Select Appropriate Management Actions

Science.gov (United States)

Tausch, R.J.; Miller, R.F.; Roundy, B.A.; Chambers, J.C.

2009-01-01

Pinon-juniper woodlands are an important vegetation type in the Great Basin. Old-growth and open shrub savanna woodlands have been present over much of the last several hundred years. Strong evidence indicates these woodlands have experienced significant tree infilling and major expansion in their distribution since the late 1800s by encroaching into surrounding landscapes once dominated by shrubs and herbaceous vegetation. Both infilling and expansion affects soil resources, plant community structure and composition, water and nutrient cycles, forage production, wildlife habitat, biodiversity, and fire patterns across the landscape. Another impact is the shift from historic fire regimes to larger and more intense wildfires that are increasingly determining the future of this landscape. This publication helps biologists and land managers consider how to look at expansion of woodlands and determine what questions to ask to develop a management strategy, including prescribed fire or other practices.

Effect of grain size on the sorption and desorption of SeO42- and SeO32- in columns of crushed granite and fracture infill from granitic water under dynamic conditions

International Nuclear Information System (INIS)

Videnska, K.; Institute of Chemical Technology, Prague; Palagyi, S.; Czech Technical University, Prague; Stamberg, K.; Vodickova, H.; Havlova, V.

2013-01-01

The sorption of 2 x 10 -5 mol/dm 3 Na 2 SeO 4 and Na 2 SeO 3 dissolved in synthetic granitic water (SGW) were investigated in columns of crushed granite and fracture infill (clay minerals) of various grain sizes. Desorption was studied using pure SGW. The goal of study was the quantification of the effect of grain size on the retardation and distribution coefficients of SeO 4 2- and SeO 3 2- , as well as on the other transport parameters (Peclet number and hydrodynamic dispersion coefficient). A model based on the erfc-function, assuming a non-linear reversible equilibrium sorption/desorption isotherm, was used for evaluation of sorption/desorption and transport parameters. The determination of selenium was performed using an ICP-MS technique. The experimental breakthrough curves were fitted using non-linear regression procedure, in the course of which the parameters mentioned were sought. Summing up, no sorption was recorded in the case of SeO 4 2- under these conditions. The values of retardation coefficients were practically one for all studied grain sizes. On the other hand, significant sorption was found for SeO 3 2- : depending on the grain size, the retardation coefficients varied between 1.6-8.7 in pure granite and 1.8-37.2 in infill materials. These values correspond to distribution coefficients of 0.2-2.5 and 0.2-12.7 cm 3 /g, respectively. The both parameters have similar values in a case of desorption which reflects the reversible character of sorption process. It was found that retardation and distribution coefficients and sorption capacity for SeO 3 2- also increase with decreasing grain size. (author)

Automatic selection of atomic fingerprints and reference configurations for machine-learning potentials

Science.gov (United States)

Imbalzano, Giulio; Anelli, Andrea; Giofré, Daniele; Klees, Sinja; Behler, Jörg; Ceriotti, Michele

2018-06-01

Machine learning of atomic-scale properties is revolutionizing molecular modeling, making it possible to evaluate inter-atomic potentials with first-principles accuracy, at a fraction of the costs. The accuracy, speed, and reliability of machine learning potentials, however, depend strongly on the way atomic configurations are represented, i.e., the choice of descriptors used as input for the machine learning method. The raw Cartesian coordinates are typically transformed in "fingerprints," or "symmetry functions," that are designed to encode, in addition to the structure, important properties of the potential energy surface like its invariances with respect to rotation, translation, and permutation of like atoms. Here we discuss automatic protocols to select a number of fingerprints out of a large pool of candidates, based on the correlations that are intrinsic to the training data. This procedure can greatly simplify the construction of neural network potentials that strike the best balance between accuracy and computational efficiency and has the potential to accelerate by orders of magnitude the evaluation of Gaussian approximation potentials based on the smooth overlap of atomic positions kernel. We present applications to the construction of neural network potentials for water and for an Al-Mg-Si alloy and to the prediction of the formation energies of small organic molecules using Gaussian process regression.

Phase associations and potential selective extraction methods for selected high-tech metals from ferromanganese nodules and crusts with siderophores

International Nuclear Information System (INIS)

Mohwinkel, Dennis; Kleint, Charlotte; Koschinsky, Andrea

2014-01-01

Highlights: • Phase associations of metals in marine Fe–Mn nodules and crusts were determined. • Selective leaching experiments with siderophore desferrioxamine B were conducted. • Siderophores selectively mobilize high-tech metals associated with Fe carrier phases. • Base metal liberation including Fe and Mn is limited. • Siderophores have promising potential for application in ore processing industries. - Abstract: Deep-sea ferromanganese deposits contain a wide range of economically important metals. Ferromanganese crusts and nodules represent an important future resource, since they not only contain base metals such as Mn, Ni, Co, Cu and Zn, but are also enriched in critical or rare high-technology elements such as Li, Mo, Nb, W, the rare earth elements and yttrium (REY). These metals could be extracted from nodules and crusts as a by-product to the base metal production. However, there are no proper separation techniques available that selectively extract certain metals out of the carrier phases. By sequential leaching, we demonstrated that, except for Li, which is present in an easily soluble form, all other high-tech metals enriched in ferromanganese nodules and crusts are largely associated with the Fe-oxyhydroxide phases and only to subordinate extents with Mn-oxide phases. Based on this fact, we conducted selective leaching experiments with the Fe-specific organic ligand desferrioxamine-B, a naturally occurring and ubiquitous siderophore. We showed by leaching of ferromanganese nodules and crusts with desferrioxamine-B that a significant and selective extraction of high-tech metals such as Li, Mo, Zr, Hf and Ta is possible, while other elements like Fe and the base metals Mn, Ni, Cu, Co and Zn are not extracted to large extents. The set of selectively extracted elements can be extended to Nb and W if Mn and carbonate phases are stripped from the bulk nodule or crust prior to the siderophore leach by e.g. a sequential leaching technique. This

Potential site selection for radioactive waste repository using GIS (Study area: Negeri Sembilan) - Phase 1

International Nuclear Information System (INIS)

Ahmad Hasnulhadi Che Kamaruddin; Faizal Azrin Abdul Razalim; Mohd Abdul Wahab Yusof; Nik Marzukee Nik Ibrahim; Nazran Harun; Muhammad Fathi Sujan; Karuppiah, T.; Surip, N.; Malik, N.N.A.; Che Musa, R.

2010-01-01

The main purpose in this paper is to create the Geographic Information System (GIS) based analysis on the potential site area for near-surface radioactive waste repository in the state of Negeri Sembilan. There are several parameters should be considered related to the safety assessment in selecting the potential site. These parameters such as land-use, urban area, soil, rainfall, lithology, lineament, geomorphology, landslide potential, slope, elevation, hydrogeology and protected land need to be considered before choosing the site. In this phase, we only consider ten parameters for determining the potential suitable site. (author)

Selective attention and the auditory vertex potential. 1: Effects of stimulus delivery rate

Science.gov (United States)

Schwent, V. L.; Hillyard, S. A.; Galambos, R.

1975-01-01

Enhancement of the auditory vertex potentials with selective attention to dichotically presented tone pips was found to be critically sensitive to the range of inter-stimulus intervals in use. Only at the shortest intervals was a clear-cut enhancement of the latency component to stimuli observed for the attended ear.

The Role of Conjoining (Tie) Channels in Lowland Floodplain Development and Lake Infilling

Science.gov (United States)

Rowland, J. C.; Dietrich, W. E.; Day, G.; Lepper, K.; Wilson, C. J.

2003-12-01

In simple models of lowland river systems, water and sediment enter the main stem via tributary and secondary channels and are only redistributed to the floodplain during overbank and crevasse splay events. Along numerous river systems across the globe, however, water and sediment are regularly exchanged between the river and off river water bodies via stable, narrow channels. These channels, known as tie channels on the Fly River in Papua New Guinea and batture channels along the lower Mississippi, are largely overlooked but important components of floodplain sediment dispersal where they exist. These channels become pathways of sediment dispersal to the floodplain system when elevated river stages force sediment-laden flows into the off-river water bodies. On the Fly River, it is estimated that about 50% of the sediment delivery to the floodplain is via these channels, and along low gradient tributary channels during flood driven flow reversals. During low flow, tie channels serve to drain the floodplain. With the outgoing flows, large amounts sediment can be carried and lost to the floodplain; floodplain lakes progressively infill with sediment as the mouth of these channels steadily prograde lakeward. These lake deposits not only become significant stratigraphic components of floodplains (traditionally referred to as clay plugs), but are important local sinks recording hundreds to thousands of years of river history. As with all sinks, the proper interpretation of these stratigraphic records requires understanding the processes by which sediment is delivered to the sink and how these processes alter the paleohydraulic and climatic signals of interest. We have conducted field investigations of conjoining channels in Papua New Guinea (the Fly and Strickland Rivers), Louisiana (Raccourci Old River ~ 65 km upriver of Baton Rouge) and Alaska (Birch Creek). These field investigations include extensive surveys of both cross and along channel morphological trends

PIXE Analysis of Artificial Turf

Science.gov (United States)

Conlan, Skye; Chalise, Sajju; Porat, Zachary; Labrake, Scott; Vineyard, Michael

2017-09-01

In recent years, there has been debate regarding the use of the crumb rubber infill in artificial turf on high school and college campuses due to the potential presence of heavy metals and carcinogenic chemicals. We performed Proton-Induced X-Ray Emission (PIXE) analysis of artificial turf infill and blade samples collected from high school and college campuses around the Capital District of NYS to search for potentially toxic substances. Crumb rubber pellets were made by mixing 1g of rubber infill and 1g of epoxy. The pellets and the turf blades were bombarded with 2.2 MeV proton beams from a 1.1-MV tandem Pelletron accelerator in the Union College Ion-Beam Analysis Laboratory and x-ray energy spectra were collected with an Amptek silicon drift detector. We analyzed the spectra using GUPIX software to determine the elemental concentrations of the samples. The turf infill showed significant levels of Ti, Fe, Co, Ni, Cu, Zn, Br, and Pb. The highest concentration of Br in the crumb rubber was 1500 +/-100 ppm while the highest detectable amount of Pb concentration was 110 +/-20 ppm. The artificial turf blades showed significant levels of Ti, Fe, and Zn with only the yellow blade showing concentrations of V and Bi.

The influence of caffeine on spatial-selective attention: an event-related potential study.

Science.gov (United States)

Ruijter, J; de Ruiter, M B; Snel, J; Lorist, M M

2000-12-01

Following the indications of previous studies that caffeine might have a specific effect on the processing of spatial information compared with other types of information, the present study investigated the influence of caffeine on an often used spatial-selective attention task. Event-related potentials (ERPs) were recorded from 11 participants under conditions of caffeine (250 mg) and placebo. Spatial-selective attention effects were reflected in the ERPs as more positive going occipital P1 and broadly distributed P2 components, and more negative going occipital-temporal N1 and broadly distributed N2 components. A treatment effect was found as a more positive going frontal P2 component in the caffeine condition, whereas interactions between treatment and attention were observed for P2 and N2 components, but not for P1 and N1 components. This pattern of results suggests that caffeine has no specific influence on spatial-selective attention, but rather, has a more general facilitating effect on perceptual processing, as well as a possible effect on the frontal control mechanisms, i.e. focusing attention and increasing selectivity.

The analysis of the wind potential in selected locations in the southeastern Poland

Directory of Open Access Journals (Sweden)

Sornek Krzysztof

2017-01-01

Full Text Available This paper shows the results of analysis of the wind potential in selected locations in the southern Poland (placed in the Małopolskie, Świętokrzyskie and Podkarpackie Voivodships. The measurements and analysis of the wind resources in potential locations of the wind turbines are important part of the investment process. The statistical analysis involves the creation of histograms (e.g. histogram of the wind speed and direction and fitting those histograms to theoretical distributions (e.g. Weilbull distributions of wind speed. Such analysis has been described and conducted using measurement data for four selected locations. Basis on the conducted analysis, the economy efficiency and environmental impact of wind turbine operation has been estimated. Three market available wind turbines have been included to calculate NPV, IRR and SPBT indicators. Then, the avoided emissions of CO2, NOx, SO2 and dust have been calculated. There were also conducted some calculation using TRNSYS simulation software. The results of simulations have been compared with measurement data and the level of convergence have been found.

An event-related brain potential study of visual selective attention to conjunctions of color and shape.

Science.gov (United States)

Smid, H G; Jakob, A; Heinze, H J

1999-03-01

What cognitive processes underlie event-related brain potential (ERP) effects related to visual multidimensional selective attention and how are these processes organized? We recorded ERPs when participants attended to one conjunction of color, global shape and local shape and ignored other conjunctions of these attributes in three discriminability conditions. Attending to color and shape produced three ERP effects: frontal selection positivity (FSP), central negativity (N2b), and posterior selection negativity (SN). The results suggested that the processes underlying SN and N2b perform independent within-dimension selections, whereas the process underlying the FSP performs hierarchical between-dimension selections. At posterior electrodes, manipulation of discriminability changed the ERPs to the relevant but not to the irrelevant stimuli, suggesting that the SN does not concern the selection process itself but rather a cognitive process initiated after selection is finished. Other findings suggested that selection of multiple visual attributes occurs in parallel.

Determining the concentration of individual eruptive events of the CAMP: Distinguishing interflow hiatuses from subterranean alteration and void infilling.

Science.gov (United States)

Olsen, P. E.; Kent, D. V.; Et-Touhami, M.

2012-04-01

More important than the total volume of eruptives in a LIP is the concentration in time of individual eruptions with timescales relevant for environmental change. In CAMP lavas, interflow sedimentary and reddened levels are interpreted as evidence of significant time between flows of hundreds to thousands of years allowing soil development and sediment deposition. Additionally, cross-cutting or enclosed sediment bodies, and basalt and sediment mixtures are interpreted as clastic intrusions and phreatic mixing (peperites). Here we show that most such occurrences are more consistent with post-emplacement alteration and void infill by sediment. Criteria for recognizing void fillings in cross-cutting, enclosed or mixed basalt include: 1) paleo-horizontal sediment stratification independent of basalt clasts or void walls - i.e., geopedal; 2) presence of clasts alien to underlying units such as lithic clasts or bones, the latter analogous to karst occurrences; 3) presence of current structures such as ripples; 4) lack of basalt chill margins; and 5) preserved stratigraphy related to overlying units. Criteria for recognizing flow-contact-parallel sediment bodies and reddened and altered contacts as post-emplacement alteration and void infill include: 1) reddening and alteration of both the upper surface of the older flow AND the lower surface of the overlying flow (caused by post-emplacement ground-water-flow); 2) presence of clasts derived from the bottom of the overlying flow; 3) location of tabular sediment bodies within blisters and paleosurface-parallel crack-sheets of the older flow, rather than at the contact between flows; and 4) physical connection between paleosurface-parallel sediment bodies and sediment bodies that cross-cutting the younger flow exhibiting post-emplacement features described above. Features that might be indicative of deposition at the land surface but are not include: 1) roots, which can penetrate for tens of meters through sediment

Diagnostic potentialities of pneumomediastinography and selective phlebography in the evaluation of thymus evolution in myasthenia

Energy Technology Data Exchange (ETDEWEB)

Vasil' ev, V.N.; Bel' chikova, N.S.; Kuksinskij, V.E. (Leningradskij Inst. Usovershenstvovaniya Vrachej (USSR))

1983-01-01

Based on an analysis of X-ray, intraoperative and histological findings in 124 operated on patients (thymectomy) with myasthenia the authors describe potentialities of pneumomediastinography (PMG) (pheumomediastinotomography-PMTG) in the determination of its main variants (hyperplasia, involution, tumor). Clear knowledge of the variants of x-ray image of the normal anatomical structures of the anterior mediastinum and age peculiarities of the thymus for correct interpretation of pneumomediastinograms is necessary. The importance of selective phlebography of the thymus for differential diagnosis of thymomas and nodular indurations of the fatty tissue in the anterior mediastinum, thymomas and fatty involution of the thymus, residual thymus and zones of fibrous-adipose tissue in the mediastinum is stressed. Selective phlebography is a simple and safe method that adds to PMG (PMTG) potentialities in the evaluation of thymus evolution in myasthenia.

Bitropic D3 Dopamine Receptor Selective Compounds as Potential Antipsychotics.

Science.gov (United States)

Luedtke, Robert R; Rangel-Barajas, Claudia; Malik, Mahinder; Reichert, David E; Mach, R H

2015-01-01

modified to develop bivalent ligands capable of interacting with receptor dimers or oligomers are also provided. Preclinical studies using bitropic D3 dopamine receptor selective ligands are also discussed as strategy to pharmacologically dissect the role of the D2 and D3 dopamine receptor subtypes in animal models of neuropsychiatric, neurological and substance abuse disorders. This research has the potential to a) advance the understanding of the role of the D2 and D3 dopamine receptor subtypes in neuropsychiatric disorders and b) lead to new treatment strategies for neuropsychiatric disorders.

Prediction of malting quality traits in barley based on genome-wide marker data to assess the potential of genomic selection.

Science.gov (United States)

Schmidt, Malthe; Kollers, Sonja; Maasberg-Prelle, Anja; Großer, Jörg; Schinkel, Burkhard; Tomerius, Alexandra; Graner, Andreas; Korzun, Viktor

2016-02-01

Genomic prediction of malting quality traits in barley shows the potential of applying genomic selection to improve selection for malting quality and speed up the breeding process. Genomic selection has been applied to various plant species, mostly for yield or yield-related traits such as grain dry matter yield or thousand kernel weight, and improvement of resistances against diseases. Quality traits have not been the main scope of analysis for genomic selection, but have rather been addressed by marker-assisted selection. In this study, the potential to apply genomic selection to twelve malting quality traits in two commercial breeding programs of spring and winter barley (Hordeum vulgare L.) was assessed. Phenotypic means were calculated combining multilocational field trial data from 3 or 4 years, depending on the trait investigated. Three to five locations were available in each of these years. Heritabilities for malting traits ranged between 0.50 and 0.98. Predictive abilities (PA), as derived from cross validation, ranged between 0.14 to 0.58 for spring barley and 0.40-0.80 for winter barley. Small training sets were shown to be sufficient to obtain useful PAs, possibly due to the narrow genetic base in this breeding material. Deployment of genomic selection in malting barley breeding clearly has the potential to reduce cost intensive phenotyping for quality traits, increase selection intensity and to shorten breeding cycles.

Diagnostic potentialities of pneumomediastinography and selective phlebography in the evaluation of thymus evolution in myasthenia

International Nuclear Information System (INIS)

Vasil'ev, V.N.; Bel'chikova, N.S.; Kuksinskij, V.E.

1983-01-01

Basing on an analysis of X-ray, intraoperative and histological findings in 124 operated on patients (thymectomy) with myasthenia the authors describe potentialities of pneumomediastinography (PMG) (pheumomediastinotomography-PMTG) in the determination of its main variants (hyperplasia, involUtion, tumor). Clear knowledge of the variants of x-ray image of the normal anatomical structures of the anterior mediastinum and age peculiarities of the thymus for correct interpretation of pneumomediastinograms is necessary. The importance of selective phlebography of the thymus for differential diagnosis of thymomas and nodular indurations of the fatty tissue in the anterior mediastinum, thymomas and fatty involution of the thymus, residual thymus and zones of fibrous-adipose tissue in the mediastinum is stressed. Selective phlebography is a simple and safe method that adds to PMG (PMTG) potentialities in the evaluation of thymus evolution in myasthenia

Auditory selective attention in adolescents with major depression: An event-related potential study.

Science.gov (United States)

Greimel, E; Trinkl, M; Bartling, J; Bakos, S; Grossheinrich, N; Schulte-Körne, G

2015-02-01

Major depression (MD) is associated with deficits in selective attention. Previous studies in adults with MD using event-related potentials (ERPs) reported abnormalities in the neurophysiological correlates of auditory selective attention. However, it is yet unclear whether these findings can be generalized to MD in adolescence. Thus, the aim of the present ERP study was to explore the neural mechanisms of auditory selective attention in adolescents with MD. 24 male and female unmedicated adolescents with MD and 21 control subjects were included in the study. ERPs were collected during an auditory oddball paradigm. Depressive adolescents tended to show a longer N100 latency to target and non-target tones. Moreover, MD subjects showed a prolonged latency of the P200 component to targets. Across groups, longer P200 latency was associated with a decreased tendency of disinhibited behavior as assessed by a behavioral questionnaire. To be able to draw more precise conclusions about differences between the neural bases of selective attention in adolescents vs. adults with MD, future studies should include both age groups and apply the same experimental setting across all subjects. The study provides strong support for abnormalities in the neurophysiolgical bases of selective attention in adolecents with MD at early stages of auditory information processing. Absent group differences in later ERP components reflecting voluntary attentional processes stand in contrast to results reported in adults with MD and may suggest that adolescents with MD possess mechanisms to compensate for abnormalities in the early stages of selective attention. Copyright © 2014 Elsevier B.V. All rights reserved.

Pinon and juniper field guide: Asking the right questions to select appropriate management actions

Science.gov (United States)

R. J. Tausch; R. F. Miller; B. A. Roundy; J. C. Chambers

2009-01-01

Pinon-juniper woodlands are an important vegetation type in the Great Basin. Old-growth and open shrub savanna woodlands have been present over much of the last several hundred years. Strong evidence indicates these woodlands have experienced significant tree infilling and major expansion in their distribution since the late 1800s by encroaching into surrounding...

Palaeohydrogeological modelling for potential future repository sites

International Nuclear Information System (INIS)

2001-01-01

In order to consider the future behaviour of a groundwater system over time scales of relevance to repository safety assessment, it is necessary to develop an understanding of how the groundwater system has changed over time. This can be done through studying the palaeohydrogeology of the groundwater system. The EQUIP project (Evidence from Quaternary Infills for Palaeohydrogeology) set out to develop and evaluate methodologies for obtaining palaeohydrogeological information from fracture infill minerals formed under past groundwater conditions. EQUIP was a collaborative project funded jointly by the European Commission and, in the UK, by the Environment Agency and UK Nirex Limited. The project also involved partners in Finland, France, Spain and Sweden. The fracture infill material chosen for this investigation was calcite, because its reactions in low temperature groundwater environments are fairly well understood and it is fairly ubiquitous in both crystalline and sedimentary rocks. In addition, geochemical modelling suggests that plausible time scales for growth of individual calcite crystals are in the range 10 to 10,000 years, so they may accumulate a record of groundwater evolution over periods of significant climate change. The project was based on four sites, having different climate histories and geological conditions, at which drillcore samples of the deep crystalline rocks, accompanied by hydrogeological and hydrochemical data for the current groundwater conditions, were already available. The principal study sites were Olkiluoto in Finland, Aspo/Laxemar in Sweden, Sellafield in the UK and Vienne in France. The results of the study focus on the morphology and bulk compositions of calcite, compositional zoning of calcite crystals and compositions of fluid inclusions. There are systematic variations in bulk compositions with depth and also in discrete compositional fluctuations (or zones) in individual calcite crystals. These are inferred to reflect

Plant operator selection system for evaluating employment candidates' potential for success in electric power plant operations positions

International Nuclear Information System (INIS)

Dunnette, M.D.

1982-01-01

The Plant Operator Selection System is a battery of tests and questionnaires that can be administered to job candidates in less than three hours. Various components of the battery measure what a job candidate has accomplished in previous educational and work situations, how well a candidate compares with others on a number of important aptitudes or abilities, and whether or not a candidate possesses the kind of personal stability required in power plant operations positions. A job candidate's answers to the tests and questionnaires of the Plant Operator Selection System are scored and converted to an OVERALL POTENTIAL INDEX. Values of the OVERALL POTENTIAL INDEX [OPI] range between 0 and 15. Candidates with high OPI values are much more likely to become effective and successful plant operators than candidates with low OPI values. It is possible to estimate the financial advantages to a company of using the Plant Operator Selection System in evaluating candidates for plant operations jobs

Acoustic noise alters selective attention processes as indicated by direct current (DC) brain potential changes.

Science.gov (United States)

Trimmel, Karin; Schätzer, Julia; Trimmel, Michael

2014-09-26

Acoustic environmental noise, even of low to moderate intensity, is known to adversely affect information processing in animals and humans via attention mechanisms. In particular, facilitation and inhibition of information processing are basic functions of selective attention. Such mechanisms can be investigated by analyzing brain potentials under conditions of externally directed attention (intake of environmental information) versus internally directed attention (rejection of environmental stimuli and focusing on memory/planning processes). This study investigated brain direct current (DC) potential shifts-which are discussed to represent different states of cortical activation-of tasks that require intake and rejection of environmental information under noise. It was hypothesized that without background noise rejection tasks would show more positive DC potential changes compared to intake tasks and that under noise both kinds of tasks would show positive DC shifts as an expression of cortical inhibition caused by noise. DC potential shifts during intake and rejection tasks were analyzed at 16 standard locations in 45 persons during irrelevant speech or white noise vs. control condition. Without noise, rejection tasks were associated with more positive DC potential changes compared to intake tasks. During background noise, however, this difference disappeared and both kinds of tasks led to positive DC shifts. Results suggest-besides some limitations-that noise modulates selective attention mechanisms by switching to an environmental information processing and noise rejection mode, which could represent a suggested "attention shift". Implications for fMRI studies as well as for public health in learning and performance environments including susceptible persons are discussed.

Acoustic Noise Alters Selective Attention Processes as Indicated by Direct Current (DC Brain Potential Changes

Directory of Open Access Journals (Sweden)

Karin Trimmel

2014-09-01

Full Text Available Acoustic environmental noise, even of low to moderate intensity, is known to adversely affect information processing in animals and humans via attention mechanisms. In particular, facilitation and inhibition of information processing are basic functions of selective attention. Such mechanisms can be investigated by analyzing brain potentials under conditions of externally directed attention (intake of environmental information versus internally directed attention (rejection of environmental stimuli and focusing on memory/planning processes. This study investigated brain direct current (DC potential shifts—which are discussed to represent different states of cortical activation—of tasks that require intake and rejection of environmental information under noise. It was hypothesized that without background noise rejection tasks would show more positive DC potential changes compared to intake tasks and that under noise both kinds of tasks would show positive DC shifts as an expression of cortical inhibition caused by noise. DC potential shifts during intake and rejection tasks were analyzed at 16 standard locations in 45 persons during irrelevant speech or white noise vs. control condition. Without noise, rejection tasks were associated with more positive DC potential changes compared to intake tasks. During background noise, however, this difference disappeared and both kinds of tasks led to positive DC shifts. Results suggest—besides some limitations—that noise modulates selective attention mechanisms by switching to an environmental information processing and noise rejection mode, which could represent a suggested “attention shift”. Implications for fMRI studies as well as for public health in learning and performance environments including susceptible persons are discussed.

Mining for diagnostic information in body surface potential maps: A comparison of feature selection techniques

Directory of Open Access Journals (Sweden)

McCullagh Paul J

2005-09-01

Full Text Available Abstract Background In body surface potential mapping, increased spatial sampling is used to allow more accurate detection of a cardiac abnormality. Although diagnostically superior to more conventional electrocardiographic techniques, the perceived complexity of the Body Surface Potential Map (BSPM acquisition process has prohibited its acceptance in clinical practice. For this reason there is an interest in striking a compromise between the minimum number of electrocardiographic recording sites required to sample the maximum electrocardiographic information. Methods In the current study, several techniques widely used in the domains of data mining and knowledge discovery have been employed to mine for diagnostic information in 192 lead BSPMs. In particular, the Single Variable Classifier (SVC based filter and Sequential Forward Selection (SFS based wrapper approaches to feature selection have been implemented and evaluated. Using a set of recordings from 116 subjects, the diagnostic ability of subsets of 3, 6, 9, 12, 24 and 32 electrocardiographic recording sites have been evaluated based on their ability to correctly asses the presence or absence of Myocardial Infarction (MI. Results It was observed that the wrapper approach, using sequential forward selection and a 5 nearest neighbour classifier, was capable of choosing a set of 24 recording sites that could correctly classify 82.8% of BSPMs. Although the filter method performed slightly less favourably, the performance was comparable with a classification accuracy of 79.3%. In addition, experiments were conducted to show how (a features chosen using the wrapper approach were specific to the classifier used in the selection model, and (b lead subsets chosen were not necessarily unique. Conclusion It was concluded that both the filter and wrapper approaches adopted were suitable for guiding the choice of recording sites useful for determining the presence of MI. It should be noted however

Direction-selective circuitry in rat retina develops independently of GABAergic, cholinergic and action potential activity.

Directory of Open Access Journals (Sweden)

Le Sun

Full Text Available The ON-OFF direction selective ganglion cells (DSGCs in the mammalian retina code image motion by responding much more strongly to movement in one direction. They do so by receiving inhibitory inputs selectively from a particular sector of processes of the overlapping starburst amacrine cells, a type of retinal interneuron. The mechanisms of establishment and regulation of this selective connection are unknown. Here, we report that in the rat retina, the morphology, physiology of the ON-OFF DSGCs and the circuitry for coding motion directions develop normally with pharmacological blockade of GABAergic, cholinergic activity and/or action potentials for over two weeks from birth. With recent results demonstrating light independent formation of the retinal DS circuitry, our results strongly suggest the formation of the circuitry, i.e., the connections between the second and third order neurons in the visual system, can be genetically programmed, although emergence of direction selectivity in the visual cortex appears to require visual experience.

Bacterial Membrane Depolarization-Linked Fuel Cell Potential Burst as Signal for Selective Detection of Alcohol.

Science.gov (United States)

Kaushik, Sharbani; Goswami, Pranab

2018-06-06

The biosensing application of microbial fuel cell (MFC) is hampered by its long response time, poor selectivity, and technical difficulty in developing portable devices. Herein, a novel signal form for rapid detection of ethanol was generated in a photosynthetic MFC (PMFC). First, a dual chambered (100 mL each) PMFC was fabricated by using cyanobacteria-based anode and abiotic cathode, and its performance was examined for detection of alcohols. A graphene-based nanobiocomposite matrix was layered over graphite anode to support cyanobacterial biofilm growth and to facilitate electron transfer. Injection of alcohols into the anodic chamber caused a transient potential burst of the PMFC within 60 s (load 1000 Ω), and the magnitude of potential could be correlated to the ethanol concentrations in the range 0.001-20% with a limit of detection (LOD) of 0.13% ( R 2 = 0.96). The device exhibited higher selectivity toward ethanol than methanol as discerned from the corresponding cell-alcohol interaction constant ( K i ) of 780 and 1250 mM. The concept was then translated to a paper-based PMFC (p-PMFC) (size ∼20 cm 2 ) wherein, the cells were merely immobilized over the anode. The device with a shelf life of ∼3 months detected ethanol within 10 s with a dynamic range of 0.005-10% and LOD of 0.02% ( R 2 = 0.99). The fast response time was attributed to the higher wettability of ethanol on the immobilized cell surface as validated by the contact angle data. Alcohols degraded the cell membrane on the order of ethanol > methanol, enhanced the redox current of the membrane-bound electron carrier proteins, and pushed the anodic band gap toward more negative value. The consequence was the potential burst, the magnitude of which was correlated to the ethanol concentrations. This novel approach has a great application potential for selective, sensitive, rapid, and portable detection of ethanol.

Phantom somatosensory evoked potentials following selective intraneural electrical stimulation in two amputees.

Science.gov (United States)

Granata, Giuseppe; Di Iorio, Riccardo; Romanello, Roberto; Iodice, Francesco; Raspopovic, Stanisa; Petrini, Francesco; Strauss, Ivo; Valle, Giacomo; Stieglitz, Thomas; Čvančara, Paul; Andreu, David; Divoux, Jean-Louis; Guiraud, David; Wauters, Loic; Hiairrassary, Arthur; Jensen, Winnie; Micera, Silvestro; Rossini, Paolo Maria

2018-06-01

The aim of the paper is to objectively demonstrate that amputees implanted with intraneural interfaces are truly able to feel a sensation in the phantom hand by recording "phantom" somatosensory evoked potentials from the corresponding brain areas. We implanted four transverse intrafascicular multichannel electrodes, available with percutaneous connections to a multichannel electrical stimulator, in the median and ulnar nerves of two left trans-radial amputees. Two channels of the implants that were able to elicit sensations during intraneural nerve stimulation were chosen, in both patients, for recording somatosensory evoked potentials. We recorded reproducible evoked responses by stimulating the median and the ulnar nerves in both cases. Latencies were in accordance with the arrival of somatosensory information to the primary somatosensory cortex. Our results provide evidence that sensations generated by intraneural stimulation are truly perceived by amputees and located in the phantom hand. Moreover, our results strongly suggest that sensations perceived in different parts of the phantom hand result in different evoked responses. Somatosensory evoked potentials obtained by selective intraneural electrical stimulation in amputee patients are a useful tool to provide an objective demonstration of somatosensory feedback in new generation bidirectional prostheses. Copyright © 2018. Published by Elsevier B.V.

An event-related brain potential study of visual selective attention to conjunctions of color and shape

NARCIS (Netherlands)

Smid, HGOM; Jakob, A; Heinze, HJ

What cognitive processes underlie event-related brain potential (ERP) effects related to visual multidimensional selective attention and how are these processes organized? We recorded ERPs when participants attended to one conjunction of color, global shape and local shape and ignored other

Effect of Printing Parameters on Tensile, Dynamic Mechanical, and Thermoelectric Properties of FDM 3D Printed CABS/ZnO Composites

Directory of Open Access Journals (Sweden)

Yah Yun Aw

2018-03-01

Full Text Available Fused deposition modelling (FDM has been widely used in medical appliances, automobile, aircraft and aerospace, household appliances, toys, and many other fields. The ease of processing, low cost and high flexibility of FDM technique are strong advantages compared to other techniques for thermoelectric polymer composite fabrication. This research work focuses on the effect of two crucial printing parameters (infill density and printing pattern on the tensile, dynamic mechanical, and thermoelectric properties of conductive acrylonitrile butadiene styrene/zinc oxide (CABS/ZnO composites fabricated by FDM technique. Results revealed significant improvement in tensile strength and Young’s modulus, with a decrease in elongation at break with infill density. Improvement in dynamic storage modulus was observed when infill density changed from 50% to 100%. However, the loss modulus and damping factor reduced gradually. The increase of thermal conductivity was relatively smaller compared to the improvement of electrical conductivity and Seebeck coefficient, therefore, the calculated figure of merit (ZT value increased with infill density. Line pattern performed better than rectilinear, especially in tensile properties and electrical conductivity. From the results obtained, FDM-fabricated CABS/ZnO showed much potential as a promising candidate for thermoelectric application.

Effect of Printing Parameters on Tensile, Dynamic Mechanical, and Thermoelectric Properties of FDM 3D Printed CABS/ZnO Composites.

Science.gov (United States)

Aw, Yah Yun; Yeoh, Cheow Keat; Idris, Muhammad Asri; Teh, Pei Leng; Hamzah, Khairul Amali; Sazali, Shulizawati Aqzna

2018-03-22

Fused deposition modelling (FDM) has been widely used in medical appliances, automobile, aircraft and aerospace, household appliances, toys, and many other fields. The ease of processing, low cost and high flexibility of FDM technique are strong advantages compared to other techniques for thermoelectric polymer composite fabrication. This research work focuses on the effect of two crucial printing parameters (infill density and printing pattern) on the tensile, dynamic mechanical, and thermoelectric properties of conductive acrylonitrile butadiene styrene/zinc oxide (CABS/ZnO composites fabricated by FDM technique. Results revealed significant improvement in tensile strength and Young's modulus, with a decrease in elongation at break with infill density. Improvement in dynamic storage modulus was observed when infill density changed from 50% to 100%. However, the loss modulus and damping factor reduced gradually. The increase of thermal conductivity was relatively smaller compared to the improvement of electrical conductivity and Seebeck coefficient, therefore, the calculated figure of merit (ZT) value increased with infill density. Line pattern performed better than rectilinear, especially in tensile properties and electrical conductivity. From the results obtained, FDM-fabricated CABS/ZnO showed much potential as a promising candidate for thermoelectric application .

Antimalarial activity of potential inhibitors of Plasmodium falciparum lactate dehydrogenase enzyme selected by docking studies.

Directory of Open Access Journals (Sweden)

Julia Penna-Coutinho

Full Text Available The Plasmodium falciparum lactate dehydrogenase enzyme (PfLDH has been considered as a potential molecular target for antimalarials due to this parasite's dependence on glycolysis for energy production. Because the LDH enzymes found in P. vivax, P. malariae and P. ovale (pLDH all exhibit ∼90% identity to PfLDH, it would be desirable to have new anti-pLDH drugs, particularly ones that are effective against P. falciparum, the most virulent species of human malaria. Our present work used docking studies to select potential inhibitors of pLDH, which were then tested for antimalarial activity against P. falciparum in vitro and P. berghei malaria in mice. A virtual screening in DrugBank for analogs of NADH (an essential cofactor to pLDH and computational studies were undertaken, and the potential binding of the selected compounds to the PfLDH active site was analyzed using Molegro Virtual Docker software. Fifty compounds were selected based on their similarity to NADH. The compounds with the best binding energies (itraconazole, atorvastatin and posaconazole were tested against P. falciparum chloroquine-resistant blood parasites. All three compounds proved to be active in two immunoenzymatic assays performed in parallel using monoclonals specific to PfLDH or a histidine rich protein (HRP2. The IC(50 values for each drug in both tests were similar, were lowest for posaconazole (<5 µM and were 40- and 100-fold less active than chloroquine. The compounds reduced P. berghei parasitemia in treated mice, in comparison to untreated controls; itraconazole was the least active compound. The results of these activity trials confirmed that molecular docking studies are an important strategy for discovering new antimalarial drugs. This approach is more practical and less expensive than discovering novel compounds that require studies on human toxicology, since these compounds are already commercially available and thus approved for human use.

Dynamics in the quantum/classical limit based on selective use of the quantum potential

International Nuclear Information System (INIS)

Garashchuk, Sophya; Dell’Angelo, David; Rassolov, Vitaly A.

2014-01-01

A classical limit of quantum dynamics can be defined by compensation of the quantum potential in the time-dependent Schrödinger equation. The quantum potential is a non-local quantity, defined in the trajectory-based form of the Schrödinger equation, due to Madelung, de Broglie, and Bohm, which formally generates the quantum-mechanical features in dynamics. Selective inclusion of the quantum potential for the degrees of freedom deemed “quantum,” defines a hybrid quantum/classical dynamics, appropriate for molecular systems comprised of light and heavy nuclei. The wavefunction is associated with all of the nuclei, and the Ehrenfest, or mean-field, averaging of the force acting on the classical degrees of freedom, typical of the mixed quantum/classical methods, is avoided. The hybrid approach is used to examine evolution of light/heavy systems in the harmonic and double-well potentials, using conventional grid-based and approximate quantum-trajectory time propagation. The approximate quantum force is defined on spatial domains, which removes unphysical coupling of the wavefunction fragments corresponding to distinct classical channels or configurations. The quantum potential, associated with the quantum particle, generates forces acting on both quantum and classical particles to describe the backreaction

Dynamics in the quantum/classical limit based on selective use of the quantum potential

Energy Technology Data Exchange (ETDEWEB)

Garashchuk, Sophya, E-mail: garashchuk@sc.edu; Dell’Angelo, David; Rassolov, Vitaly A. [Department of Chemistry and Biochemistry, University of South Carolina, Columbia, South Carolina 29208 (United States)

2014-12-21

A classical limit of quantum dynamics can be defined by compensation of the quantum potential in the time-dependent Schrödinger equation. The quantum potential is a non-local quantity, defined in the trajectory-based form of the Schrödinger equation, due to Madelung, de Broglie, and Bohm, which formally generates the quantum-mechanical features in dynamics. Selective inclusion of the quantum potential for the degrees of freedom deemed “quantum,” defines a hybrid quantum/classical dynamics, appropriate for molecular systems comprised of light and heavy nuclei. The wavefunction is associated with all of the nuclei, and the Ehrenfest, or mean-field, averaging of the force acting on the classical degrees of freedom, typical of the mixed quantum/classical methods, is avoided. The hybrid approach is used to examine evolution of light/heavy systems in the harmonic and double-well potentials, using conventional grid-based and approximate quantum-trajectory time propagation. The approximate quantum force is defined on spatial domains, which removes unphysical coupling of the wavefunction fragments corresponding to distinct classical channels or configurations. The quantum potential, associated with the quantum particle, generates forces acting on both quantum and classical particles to describe the backreaction.

Crossmodal effects of Guqin and piano music on selective attention: an event-related potential study.

Science.gov (United States)

Zhu, Weina; Zhang, Junjun; Ding, Xiaojun; Zhou, Changle; Ma, Yuanye; Xu, Dan

2009-11-27

To compare the effects of music from different cultural environments (Guqin: Chinese music; piano: Western music) on crossmodal selective attention, behavioral and event-related potential (ERP) data in a standard two-stimulus visual oddball task were recorded from Chinese subjects in three conditions: silence, Guqin music or piano music background. Visual task data were then compared with auditory task data collected previously. In contrast with the results of the auditory task, the early (N1) and late (P300) stages exhibited no differences between Guqin and piano backgrounds during the visual task. Taking our previous study and this study together, we can conclude that: although the cultural-familiar music influenced selective attention both in the early and late stages, these effects appeared only within a sensory modality (auditory) but not in cross-sensory modalities (visual). Thus, the musical cultural factor is more obvious in intramodal than in crossmodal selective attention.

Potential of Agricultural Biomass: Comparative Review of Selected EU Regions and Region of Vojvodina

Directory of Open Access Journals (Sweden)

Odavić Petrana

2017-07-01

Full Text Available Owing to the fact that the EU is committed to reducing greenhouse gas emissions by 20% below 1990 levels by 2020, and having in mind their high dependence on import of oil and oil derivatives, which, in turn, causes instability of power supply, increasing attention is being paid to renewable energy sources. Given the ongoing pre-accession process of the Republic of Serbia in relation to the EU, in order to determine the capacity of the country to increase the share of energy use from renewable sources, in this paper clustering of selected regions in the EU-28 has been carried out, after which a comparative analysis of regions was performed in terms of potential of agricultural biomass, for the purpose of generating energy. The aim of this study is to determine the level of the region of Vojvodina in relation to ten selected EU regions, based on parameters that affect the potential for using renewable energy sources, primarily residues from agriculture. By applying the K-means method, Borda count method and comparative analysis, and based on empirical data, results show that the region of Vojvodina takes a significant fifth place. Its share of agricultural land ranks it as the first, whereas production of cereals and the total number of farms larger than 100 ha rank it as the second. It could be concluded that Vojvodina is an agricultural region with large quantities of plant remains, primarily those left over from harvest, which represents a significant potential for energy generation from agricultural biomass.

TU-H-CAMPUS-IeP2-05: Breast and Soft Tissue-Equivalent 3D Printed Phantoms for Imaging and Dosimetry

International Nuclear Information System (INIS)

Hintenlang, D; Terracino, B

2016-01-01

Purpose: The study has the goal to demonstrate that breast and soft tissue-equivalent phantoms for dosimetry applications in the diagnostic energy range can be fabricated using common 3D printing methods. Methods: 3D printing provides the opportunity to rapidly prototype uniquely designed objects from a variety of materials. Common 3D printers are usually limited to printing objects based on thermoplastic materials such as PLA, or ABS. The most commonly available plastic is PLA, which has a density significantly greater than soft tissue. We utilized a popular 3D printer to demonstrate that tissue specific phantom materials can be generated through the careful selection of 3D printing parameters. A series of stepwedges were designed and printed using a Makerbot Replicator2 3D printing system. The print file provides custom adjustment of the infill density, orientation and position of the object on the printer stage, selection of infill patterns, and other control parameters. The x-ray attenuation and uniformity of fabricated phantoms were evaluated and compared to common tissue-equivalent phantom materials, acrylic and BR12. X-ray exposure measurements were made using narrow beam geometry on a clinical mammography unit at 28 kVp on the series of phantoms. The 3D printed phantoms were imaged at 28 kVp to visualize the internal structure and uniformity in different planes of the phantoms. Results: By utilizing specific in-fill density and patterns we are able to produce a phantom closely matching the attenuation characteristics of BR12 at 28 kVp. The in-fill patterns used are heterogeneous, so a judicious selection of fill pattern and the orientation of the fill pattern must be made in order to obtain homogenous attenuation along the intended direction of beam propagation. Conclusions: By careful manipulation of the printing parameters, breast and soft tissue-equivalent phantoms appropriate for use at imaging energies can be fabricated using 3D printing techniques.

TU-H-CAMPUS-IeP2-05: Breast and Soft Tissue-Equivalent 3D Printed Phantoms for Imaging and Dosimetry

Energy Technology Data Exchange (ETDEWEB)

Hintenlang, D; Terracino, B [University Florida, Gainesville, FL (United States)

2016-06-15

Purpose: The study has the goal to demonstrate that breast and soft tissue-equivalent phantoms for dosimetry applications in the diagnostic energy range can be fabricated using common 3D printing methods. Methods: 3D printing provides the opportunity to rapidly prototype uniquely designed objects from a variety of materials. Common 3D printers are usually limited to printing objects based on thermoplastic materials such as PLA, or ABS. The most commonly available plastic is PLA, which has a density significantly greater than soft tissue. We utilized a popular 3D printer to demonstrate that tissue specific phantom materials can be generated through the careful selection of 3D printing parameters. A series of stepwedges were designed and printed using a Makerbot Replicator2 3D printing system. The print file provides custom adjustment of the infill density, orientation and position of the object on the printer stage, selection of infill patterns, and other control parameters. The x-ray attenuation and uniformity of fabricated phantoms were evaluated and compared to common tissue-equivalent phantom materials, acrylic and BR12. X-ray exposure measurements were made using narrow beam geometry on a clinical mammography unit at 28 kVp on the series of phantoms. The 3D printed phantoms were imaged at 28 kVp to visualize the internal structure and uniformity in different planes of the phantoms. Results: By utilizing specific in-fill density and patterns we are able to produce a phantom closely matching the attenuation characteristics of BR12 at 28 kVp. The in-fill patterns used are heterogeneous, so a judicious selection of fill pattern and the orientation of the fill pattern must be made in order to obtain homogenous attenuation along the intended direction of beam propagation. Conclusions: By careful manipulation of the printing parameters, breast and soft tissue-equivalent phantoms appropriate for use at imaging energies can be fabricated using 3D printing techniques.

Experimental study on the influence of the opening in brick-masonry wall to seismic performance of reinforced concrete frame structures

Science.gov (United States)

Maidiawati, Tanjung, Jafril; Medriosa, Hamdeni

2017-10-01

Reinforced concrete (RC) frame structures with brick-masonry infills are commonly used in developing countries and high-risk seismic area, such as Indonesia. Significant researches have been carried out for studying the seismic performance of RC frame structures with brick-masonry infills. Only few of them focused on effects of the opening in the brick-masonry infill to the seismic performance of the RC frame structures. The presence of opening in brick-masonry infill is often used for placing doors and windows as well, however, it may reduce the seismic performance of the RC frame structure. In the current study, they influence of the opening in brick-masonry infills to the seismic performance RC frame structure will experimentally evaluated. Five of 1/4-scaled single story and single bay RC frame specimens were prepared, i.e. an RC bare frame, a clay brick-masonry infilled RC frame and three of clay brick-masonry infilled RC frame with openings in the brick-masonry infills. The last three specimens were clay brick infilled RC frame with a center opening, clay brick infilled RC frame with two openings used for placing the windows and clay brick infilled RC frame with opening for placing the door. The specimens pushed over by applying the static monotonic lateral load to the upper beam of the RC frame structures. The incremental of the lateral load and the lateral displacement of RC frame's column was recorded during test. The crack propagation and the major cracks were also observed to identify the mechanism failure of specimens. As the results, the opening in the brick-masonry wall controls the failure mechanism, the lateral strength and the stiffness of the overall of infilled RC frame structure. The diagonal shear crack pattern was found on brick-masonry wall without opening, on other hand the different crack patterns were observed on brick-masonry wall with openings. Although the opening in the brick masonry infill reduced the lateral strength and stiffness of

Marker-assisted selection as a potential tool for genetic improvement in developing countries: debating the issues

International Nuclear Information System (INIS)

Robinson, J.; Ruane, J.

2007-01-01

Marker-assisted selection (MAS) is a complementary technology, for use in conjunction with more established conventional methods of genetic selection, for plant and animal improvement. It has generated a good deal of expectations, many of which have yet to be realized. Although documentation is limited, the current impact of MAS on products delivered to farmers seems small. While the future possibilities and potential impacts of MAS are considerable, there are also obstacles to its use, particularly in developing countries. Principal among these are issues relating to current high costs of the technology and its appropriateness, given that publicly funded agricultural research in many developing countries is suboptimal and development priorities do not necessarily include genetic improvement programmes. Other potential obstacles to the uptake of MAS in developing countries include limited infrastructure, the absence of conventional selection and breeding programmes, poor private sector involvement and lack of research on specific crops of importance in developing countries. Intellectual property rights may also be an important constraint to development and uptake of MAS in the developing world. It is hoped that through partnerships between developing and developed country institutions and individuals, including public-private sector collaboration, MAS costs can be reduced, resources pooled and shared and capacity developed. With the assistance of the Consultative Group on International Agricultural Research (CGIAR) and international organizations such as FAO, developing countries can benefit more from MAS. These were some of the outcomes of a moderated e-mail conference, entitled 'Molecular Marker- Assisted Selection as a Potential Tool for Genetic Improvement of Crops, Forest Trees, Livestock and Fish in Developing Countries', that FAO hosted at the end of 2003. During the four-week conference, 627 people subscribed and 85 messages were posted, about 60 percent

An in silico high-throughput screen identifies potential selective inhibitors for the non-receptor tyrosine kinase Pyk2

Directory of Open Access Journals (Sweden)

Meirson T

2017-05-01

Full Text Available Tomer Meirson, Abraham O Samson, Hava Gil-Henn Faculty of Medicine in the Galilee, Bar-Ilan University, Safed, Israel Abstract: The non-receptor tyrosine kinase proline-rich tyrosine kinase 2 (Pyk2 is a critical mediator of signaling from cell surface growth factor and adhesion receptors to cell migration, proliferation, and survival. Emerging evidence indicates that signaling by Pyk2 regulates hematopoietic cell response, bone density, neuronal degeneration, angiogenesis, and cancer. These physiological and pathological roles of Pyk2 warrant it as a valuable therapeutic target for invasive cancers, osteoporosis, Alzheimer’s disease, and inflammatory cellular response. Despite its potential as a therapeutic target, no potent and selective inhibitor of Pyk2 is available at present. As a first step toward discovering specific potential inhibitors of Pyk2, we used an in silico high-throughput screening approach. A virtual library of six million lead-like compounds was docked against four different high-resolution Pyk2 kinase domain crystal structures and further selected for predicted potency and ligand efficiency. Ligand selectivity for Pyk2 over focal adhesion kinase (FAK was evaluated by comparative docking of ligands and measurement of binding free energy so as to obtain 40 potential candidates. Finally, the structural flexibility of a subset of the docking complexes was evaluated by molecular dynamics simulation, followed by intermolecular interaction analysis. These compounds may be considered as promising leads for further development of highly selective Pyk2 inhibitors. Keywords: virtual screen, efficiency metrics, MM-GBSA, molecular dynamics

Potential of organic Rankine cycle technology in India: Working fluid selection and feasibility study

International Nuclear Information System (INIS)

Sarkar, Jahar; Bhattacharyya, Souvik

2015-01-01

India has great potential to employ the ORC (organic Rankine cycle) technology for conversion of low temperature waste heat and renewable energy. In this study, available waste heat and relevant renewable heat sources in India are reviewed and suitable working fluids for ORC have been selected based on operational, environmental and safety criteria. A feasibility study and comparison of selected fluids for ORC is also presented for Indian climates along with discussions on component, operation and cost related aspects. A comprehensive review on available heat sources and sinks shows that India has plenty of waste heat and renewable energy sources for electricity generation by means of ORC; however, condenser operation may be challenging due to wide ambient temperature variation. Appropriate performance comparison among selected working fluids shows that ammonia is the best fluid in terms of net power generation and compactness of turbo-machineries, whereas n-Pentane is the best fluid in terms of thermal efficiency and heat exchanger compactness. Both are recommended as working fluids for ORC installations in India. The study reveals that there is a great opportunity to employ this technology in India provided we have to overcome some challenges related to component selection, finance and maintenance. - Highlights: • Available waste heat and renewable heat energies, and sinks in India are reviewed. • Suitable working fluids are selected by operational, environmental and safety criteria. • A feasibility study and comparison of selected fluids are presented for Indian climates. • Ammonia and n-Pentane are recommended for ORC installation in India. • Challenges related to plant component, operation and cost are discussed.

College grade point average as a personnel selection device: ethnic group differences and potential adverse impact.

Science.gov (United States)

Roth, P L; Bobko, P

2000-06-01

College grade point average (GPA) is often used in a variety of ways in personnel selection. Unfortunately, there is little empirical research literature in human resource management that informs researchers or practitioners about the magnitude of ethnic group differences and any potential adverse impact implications when using cumulative GPA for selection. Data from a medium-sized university in the Southeast (N = 7,498) indicate that the standardized average Black-White difference for cumulative GPA in the senior year is d = 0.78. The authors also conducted analyses at 3 GPA screens (3.00, 3.25, and 3.50) to demonstrate that employers (or educators) might face adverse impact at all 3 levels if GPA continues to be implemented as part of a selection system. Implications and future research are discussed.

Mass, charge, and energy separation by selective acceleration with a traveling potential hill

Science.gov (United States)

Tung, L. Schwager; Barr, W. L.; Lowder, R. S.; Post, R. F.

1996-10-01

A traveling electric potential hill has been used to generate an ion beam with an energy distribution that is mass dependent from a monoenergetic ion beam of mixed masses. This effect can be utilized as a novel method for mass separation applied to identification or enrichment of ions (e.g., of elements, isotopes, or molecules). This theory for mass-selective acceleration is presented here and is shown to be confirmed by experiment and by a time-dependent particle-in-cell computer simulation. Results show that monoenergetic ions with the particular mass of choice are accelerated by controlling the hill potential and the hill velocity. The hill velocity is typically 20%-30% faster than the ions to be accelerated. The ability of the hill to pickup a particular mass uses the fact that small kinetic energy differences in the lab frame appear much larger in the moving hill frame. Ions will gain energy from the approaching hill if their relative energy in the moving hill frame is less than the peak potential of the hill. The final energy of these accelerated ions can be several times the source energy, which facilitates energy filtering for mass purification or identification. If the hill potential is chosen to accelerate multiple masses, the heaviest mass will have the greatest final energy. Hence, choosing the appropriate hill potential and collector retarding voltage will isolate ions with the lightest, heaviest, or intermediate mass. In the experimental device, called a Solitron, purified 20Ne and 22Ne are extracted from a ribbon beam of neon that is originally composed of 20Ne:22Ne in the natural ratio of 91:9. The isotopic content of the processed beam is determined by measuring the energy distribution of the detected current. These results agree with the theory. In addition to mass selectivity, our theory can also be applied to the filtration of an ion beam according to charge state or energy. Because of this variety of properties, the Solitron is envisioned to

Acoustic Noise Alters Selective Attention Processes as Indicated by Direct Current (DC) Brain Potential Changes

OpenAIRE

Trimmel, Karin; Schätzer, Julia; Trimmel, Michael

2014-01-01

Acoustic environmental noise, even of low to moderate intensity, is known to adversely affect information processing in animals and humans via attention mechanisms. In particular, facilitation and inhibition of information processing are basic functions of selective attention. Such mechanisms can be investigated by analyzing brain potentials under conditions of externally directed attention (intake of environmental information) versus internally directed attention (rejection of environmental ...

Effects of pH and pulp potential on the selective separation of Molybdenite from the Sungun Cu-Mo concentrate

Directory of Open Access Journals (Sweden)

Javad Mehrabani

2017-12-01

Full Text Available In this research, selective flotation of Mo from the Sungun Cu-Mo concentrate was evaluated in different operating conditions. It was found that the addition of 16 kg/t Na2S into flotation pulp and aeration decreased rapidly the initial oxidized- reduction potential (ORP of the pulp from +228mV to -597 mV (with reference to standard Ag/AgCl electrode and increasing the amount of Na2S by 50kg/t did not change the pulp potential. The highest metallurgical and selective separation of Mo from Mo-Cu concentrate were achieved at pH= 10.5 and ORP

Visual evoked potentials and selective attention to points in space

Science.gov (United States)

Van Voorhis, S.; Hillyard, S. A.

1977-01-01

Visual evoked potentials (VEPs) were recorded to sequences of flashes delivered to the right and left visual fields while subjects responded promptly to designated stimuli in one field at a time (focused attention), in both fields at once (divided attention), or to neither field (passive). Three stimulus schedules were used: the first was a replication of a previous study (Eason, Harter, and White, 1969) where left- and right-field flashes were delivered quasi-independently, while in the other two the flashes were delivered to the two fields in random order (Bernoulli sequence). VEPs to attended-field stimuli were enhanced at both occipital (O2) and central (Cz) recording sites under all stimulus sequences, but different components were affected at the two scalp sites. It was suggested that the VEP at O2 may reflect modality-specific processing events, while the response at Cz, like its auditory homologue, may index more general aspects of selective attention.

Maitotoxin Is a Potential Selective Activator of the Endogenous Transient Receptor Potential Canonical Type 1 Channel in Xenopus laevis Oocytes

Directory of Open Access Journals (Sweden)

Pedro L. Flores

2017-06-01

Full Text Available Maitotoxin (MTX is the most potent marine toxin known to date. It is responsible for a particular human intoxication syndrome called ciguatera fish poisoning (CFP. Several reports indicate that MTX is an activator of non-selective cation channels (NSCC in different cell types. The molecular identity of these channels is still an unresolved topic, and it has been proposed that the transient receptor potential (TRP channels are involved in this effect. In Xenopus laevis oocytes, MTX at picomolar (pM concentrations induces the activation of NSCC with functional and pharmacological properties that resemble the activity of TRP channels. The purpose of this study was to characterize the molecular identity of the TRP channel involved in the MTX response, using the small interference RNA (siRNA approach and the two-electrode voltage-clamp technique (TEVC. The injection of a specifically designed siRNA to silence the transient receptor potential canonical type 1 (TRPC1 protein expression abolished the MTX response. MTX had no effect on oocytes, even at doses 20-fold higher compared to cells without injection. Total mRNA and protein levels of TRPC1 were notably diminished. The TRPC4 siRNA did not change the MTX effect, even though it was important to note that the protein level was reduced by the silencing of TRPC4. Our results suggest that MTX could be a selective activator of TRPC1 channels in X. laevis oocytes and a useful pharmacological tool for further studies on these TRP channels.

Infill and mire evolution of a typical kettle hole: young ages at great depths (Jackenmoos, Austria)

Science.gov (United States)

Götz, Joachim; Salcher, Bernhard

2015-04-01

Kettle holes are very common features in proglacial environments. Myriads of small, often circular shaped lakes are indicative of dead ice slowly melting out after the collapse of glaciers and subsequent burial of glaciofluvial sediments. Many of these lakes transformed into mires during the Postglacial and the Holocene. Still, little is known about the mechanisms leading to mire formation in such environments. We aim to analyse the shape and the postglacial history of infilling and peat accumulation of a typical dead ice kettle using 2D resistivity surveying, core-drilling, 14C dating and palynologic analyses. The kettle hole mire is located within a small kame delta deposit just south of the LGM extend of the Salzach Piedmont glacier (Austria/Germany). Today, the mire is a spot of exceptional high biodiversity and under protection. Sediment core samples extracted in the deepest (c. 10-14 m) and central part of the kettle directly overly lacustrine fine sediments and yielded young ages covering the subatlantic period only. Young ages are in agreement with palynologic results comprising e.g. pollen of secale (rye) and juglans (walnut). However, these deposits are situated beneath a massive water body (10 m), only covered by a thin floating mat. A second, more distally situated drill core indicates the thinning of this water body at the expense of peat deposits covering the Late Glacial to Middle Holocene. Multiple 2D resistivity data support drilling information and enabled us to reconstruct the shape of the basin. The transition from lacustrine sediments to the water body above is characterised by a sharp increase in resistivity. Furthermore, the resistivity pattern within the entire kettle indicates an increase towards the centre, most probably as a result of the changing nutrient content. The postglacial evolution of the mire is in agreement with the concept of "floating mat terrestrialisation", representing a horizontal growth of the floating mat from the edges

Evaluation of functional potentiality of selected commonly consumed foods of Bangladesh

Directory of Open Access Journals (Sweden)

Nazma Shaheen

2016-11-01

Full Text Available Background: Rising tide of chronic nutrition related non-communicable diseases yoked with extant under nutrition problems makes it imperative to carry out scientific research towards the discovery of functional foods. Although the emergence of these diseases are believed to be related to a constellation of dietary, socio-economic and lifestyle related risk factors, central to the pathogenesis of these diseases (or disease states are free radicals, oxidative stress, and inflammatory processes typically accompanied by pain. Therefore, functional whole foods with physiologically active antioxidants, anti-inflammatory, and analgesic compounds seem to be the most promising option to deal with the pathogenesis of existing and emerging chronic diseases burden of Bangladesh. Methods: Edible portions of 70 commonly consumed Bangladeshi foods – including one cereal, five legumes, fourteen vegetables, four tea varieties, five oil seeds, twenty spices, and twenty one fruits – were evaluated for total phenol content (TPC by Folin-Ciocalteau assay. To evaluate functional potentiality, in vitro antioxidant capacity (AC of selected food items were evaluated by DPPH (2,2-diphenyl- 1-picrylhydrazyl radical scavenging assays, in vitro anti-inflammatory potential by observing the production of pro-inflammatory cytokine TNF-α using J774A.1 cells stimulated with lipopolysaccharide (LPS, in vivo anti-inflammatory potential by measuring carrageenan induced rat paw edema reduction, and in vivo analgesic potential by acetic acid induced writhing test in mice. Results: Spices, oilseeds, and teas showed high concentration of TPC among the analyzed foods, while spices and teas exhibited notable AC. Green tea showed highest concentrations of TPC (2349 mg Gallic Acid Equivalent / g and AC (2432 µmole Trolox Equivalent/g. Fourteen food items showed potential in vitro anti-inflammatory activity with confirmatory dose response effect shown by 8 items. In vivo, black sesame

Studies on the matched potential method for determining the selectivity coefficients of ion-selective electrodes based on neutral ionophores: experimental and theoretical verification.

Science.gov (United States)

Tohda, K; Dragoe, D; Shibata, M; Umezawa, Y

2001-06-01

A theory is presented that describes the matched potential method (MPM) for the determination of the potentiometric selectivity coefficients (KA,Bpot) of ion-selective electrodes for two ions with any charge. This MPM theory is based on electrical diffuse layers on both the membrane and the aqueous side of the interface, and is therefore independent of the Nicolsky-Eisenman equation. Instead, the Poisson equation is used and a Boltzmann distribution is assumed with respect to all charged species, including primary, interfering and background electrolyte ions located at the diffuse double layers. In this model, the MPM-selectivity coefficients of ions with equal charge (ZA = ZB) are expressed as the ratio of the concentrations of the primary and interfering ions in aqueous solutions at which the same amounts of the primary and interfering ions permselectively extracted into the membrane surface. For ions with unequal charge (ZA not equal to ZB), the selectivity coefficients are expressed as a function not only of the amounts of the primary and interfering ions permeated into the membrane surface, but also of the primary ion concentration in the initial reference solution and the delta EMF value. Using the measured complexation stability constants and single ion distribution coefficients for the relevant systems, the corresponding MPM selectivity coefficients can be calculated from the developed MPM theory. It was found that this MPM theory is capable of accurately and precisely predicting the MPM selectivity coefficients for a series of ion-selective electrodes (ISEs) with representative ionophore systems, which are generally in complete agreement with independently determined MPM selectivity values from the potentiometric measurements. These results also conclude that the assumption for the Boltzmann distribution was in fact valid in the theory. The recent critical papers on MPM have pointed out that because the MPM selectivity coefficients are highly concentration

Effects of an Anchoring Configuration on the Static Response of Geotextile and Geogrid Fabrics

National Research Council Canada - National Science Library

Simmons, Lebron

2000-01-01

An investigation is made of a potential retrofit system for in-fill masonry walls subjected to blast effects that consist of geotextile or geogrid materials anchored to the roof, floor slabs and beams...

Legionella Persistence in Manufactured Water Systems: Pasteurization Potentially Selecting for Thermal Tolerance

Directory of Open Access Journals (Sweden)

Harriet Whiley

2017-07-01

Full Text Available Legionella is an opportunistic waterborne pathogen of increasing public health significance. Pasteurization, otherwise known as super-heat and flush (increasing water temperature to above 70°C and flushing all outlets, has been identified as an important mechanism for the disinfection of Legionella in manufactured water systems. However, several studies have reported that this procedure was ineffective at remediating water distribution systems as Legionella was able to maintain long term persistent contamination. Up to 25% of L. pneumophila cells survived heat treatment of 70°C, but all of these were in a viable but non-culturable state. This demonstrates the limitations of the culture method of Legionella detection currently used to evaluate disinfection protocols. In addition, it has been demonstrated that pasteurization and nutrient starvation can select for thermal tolerant strains, where L. pneumophila was consistently identified as having greater thermal tolerance compared to other Legionella species. This review demonstrates that further research is needed to investigate the effectiveness of pasteurization as a disinfection method. In particular, it focuses on the potential for pasteurization to select for thermal tolerant L. pneumophila strains which, as the primary causative agent of Legionnaires disease, have greater public health significance compared to other Legionella species.

Solvent sensitivity of smart 3D-printed nanocomposite liquid sensor

Science.gov (United States)

Aliheidari, Nahal; Ameli, Amir; Pötschke, Petra

2018-03-01

Fused deposition modeling (FDM) is one of the 3D printing methods that has attracted significant attention. In this method, small and complex samples with nearly no limitation in geometry can be fabricated layer by layer to form end-use parts. This work investigates the liquid sensing behavior of FDM printed flexible thermoplastic polyurethane, TPU filled with multiwalled carbon nanotubes, MWCNTs. The sensing capability of printed TPU-MWCNT was studied as a function of MWCNT content and infill density in response to different solvents, i.e., ethanol, acetone and toluene. The solvents were selected based on their widespread use and importance in medical and industrial applications. U-shaped liquid sensors with 2, 3 and 4wt.% MWCNT content were printed at three different infill densities of 50, 75 and 100%. Solvent sensitivity was then characterized by immersing the sensors in the solvents and measuring the resistance evolution over 25s. The results indicated a sensitivity order of acetone > toluene > ethanol, which was in agreement with the predictions of FloryHiggins solubility equation. For all the solvents, the sensitivity was enhanced as the infill density of the printed samples was decreased. This was attributed to the increased surface area to volume ratio and shortened diffusion paths. The MWCNT content was also observed to have a profound effect on the sensitivity; in samples with partial infill, the sensitivity was found to be inversely proportional to the MWCNT content, such that the highest resistance change was obtained for nanocomposites with the lowest MWCNT content of 2wt.%. For instance, a resistance increase of more than 10 times was obtained in 25 s once TPU-2wt.%MWCNT with 50% infill was tested against acetone. The results of this work reveals that highly sensitive liquid sensors can be fabricated with the aid of 3D printing without the need for complex processing methods.

The potential of selected macroalgal species for treatment of AMD at different pH ranges in temperate regions

CSIR Research Space (South Africa)

Oberholster, Paul J

2014-09-01

Full Text Available The metal bioaccumulation potential of selected macroalgae species at different pH ranges was study for usage as part of a possible secondary passive acid mine drainage (AMD) treatment technology in algae ponds. Two separate studies were conducted...

A potential approach for low flow selection in water resource supply and management

Science.gov (United States)

Ouyang, Ying

2012-08-01

SummaryLow flow selections are essential to water resource management, water supply planning, and watershed ecosystem restoration. In this study, a new approach, namely the frequent-low (FL) approach (or frequent-low index), was developed based on the minimum frequent-low flow or level used in minimum flows and/or levels program in northeast Florida, USA. This FL approach was then compared to the conventional 7Q10 approach for low flow selections prior to its applications, using the USGS flow data from the freshwater environment (Big Sunflower River, Mississippi) as well as from the estuarine environment (St. Johns River, Florida). Unlike the FL approach that is associated with the biological and ecological impacts, the 7Q10 approach could lead to the selections of extremely low flows (e.g., near-zero flows) that may hinder its use for establishing criteria to prevent streams from significant harm to biological and ecological communities. Additionally, the 7Q10 approach could not be used when the period of data records is less than 10 years by definition while this may not the case for the FL approach. Results from both approaches showed that the low flows from the Big Sunflower River and the St. Johns River decreased as time elapsed, demonstrating that these two rivers have become drier during the last several decades with a potential of salted water intrusion to the St. Johns River. Results from the FL approach further revealed that the recurrence probability of low flow increased while the recurrence interval of low flow decreased as time elapsed in both rivers, indicating that low flows occurred more frequent in these rivers as time elapsed. This report suggests that the FL approach, developed in this study, is a useful alternative for low flow selections in addition to the 7Q10 approach.

Low- and intermediate level radioactive waste from Risoe, Denmark. Location studies for potential disposal areas. Report no. 1. Data, maps, models and methods used for selection of potential areas

Energy Technology Data Exchange (ETDEWEB)

Gravesen, P.; Nilsson, B.; Schack Pedersen, S.A.; Binderup, M.

2011-07-01

The low and intermediate level radioactive waste from Risoe (the nuclear reactor buildings plus different types of material from the research periods) and radioactive waste from hospitals and research institutes have to be stored in a final disposal in Denmark for at least 300 years. The Minister for Health and Prevention presented the background and decision plan for the Danish Parliament in January 2009. All political parties agreed on the plan. The investigation of geological deposits as potential waste disposals for high radioactive waste from nuclear power plants has earlier focused on deep seated salt deposits and basement rocks. Nevertheless, the Tertiary clays were mapped as well. In the present study, the salt diapirs and the salt deposits are not included. The present report briefly describes the existing data collections (including databases, maps and models), that are used during the work of selection of ca. 20 potentially suitable areas. Most of the information is stored in GEUS databases: Location of boreholes, borehole data, rock sediment and ground water compounds, maps, geophysical data and much more, but information is also collected from other institutions. The methods are described in more details (chapter 6) and this description is the direct background for the selection process, the characterisation of the 20 areas and for the final selection of the 2 or 3 most potential sites. (LN)

Low- and intermediate level radioactive waste from Risoe, Denmark. Location studies for potential disposal areas. Report no. 1. Data, maps, models and methods used for selection of potential areas

International Nuclear Information System (INIS)

Gravesen, P.; Nilsson, B.; Schack Pedersen, S.A.; Binderup, M.

2011-01-01

The low and intermediate level radioactive waste from Risoe (the nuclear reactor buildings plus different types of material from the research periods) and radioactive waste from hospitals and research institutes have to be stored in a final disposal in Denmark for at least 300 years. The Minister for Health and Prevention presented the background and decision plan for the Danish Parliament in January 2009. All political parties agreed on the plan. The investigation of geological deposits as potential waste disposals for high radioactive waste from nuclear power plants has earlier focused on deep seated salt deposits and basement rocks. Nevertheless, the Tertiary clays were mapped as well. In the present study, the salt diapirs and the salt deposits are not included. The present report briefly describes the existing data collections (including databases, maps and models), that are used during the work of selection of ca. 20 potentially suitable areas. Most of the information is stored in GEUS databases: Location of boreholes, borehole data, rock sediment and ground water compounds, maps, geophysical data and much more, but information is also collected from other institutions. The methods are described in more details (chapter 6) and this description is the direct background for the selection process, the characterisation of the 20 areas and for the final selection of the 2 or 3 most potential sites. (LN)

Selective effects of potassium elevations on glutamate signaling and action potential conduction in hippocampus.

Science.gov (United States)

Meeks, Julian P; Mennerick, Steven

2004-01-07

High-frequency synaptic transmission is depressed by moderate rises in the extracellular potassium concentration ([K+]o). Previous reports have indicated that depression of action potential signaling may underlie the synaptic depression. Here, we investigated the specific contribution of K+-induced action potential changes to synaptic depression. We found that glutamatergic transmission in the hippocampal area CA1 was significantly depressed by 8-10 mM [K+]o, but that GABAergic transmission remained intact. Riluzole, a drug that slows recovery from inactivation of voltage-gated sodium channels (NaChs), interacts with subthreshold [K+]o to depress afferent volleys and EPSCs strongly. Thus, elevated [K+]o likely depresses synapses by slowing NaCh recovery from inactivation. It is unclear from previous studies whether [K+]o-induced action potential depression is caused by changes in initiation, reliability, or waveform. We investigated these possibilities explicitly. [K+]o-induced afferent volley depression was independent of stimulus strength, suggesting that changes in action potential initiation do not explain [K+]o-induced depression. Measurements of action potentials from single axons revealed that 8 mM [K+]o increased conduction failures in a subpopulation of fibers and depressed action potential amplitude in all fibers. Together, these changes quantitatively account for the afferent volley depression. We estimate that conduction failure explains more than half of the synaptic depression observed at 8 mM [K+]o, with the remaining depression likely explained by waveform changes. These mechanisms of selective sensitivity of glutamate release to [K+]o accumulation represent a unique neuromodulatory mechanism and a brake on runaway excitation.

Recording strategies and selection potential of feed intake measured using the X-ray method in rainbow trout

Directory of Open Access Journals (Sweden)

Mäntysaari Esa A

2006-06-01

Full Text Available Abstract This study examines the way long-term feed intake should be recorded accurately for selective breeding purposes, and estimates selection potential in feed intake using the X-ray method to record individual daily feed intake in rainbow trout (Oncorhynchus mykiss. The analysis showed that the point estimates of daily feed intake displayed low repeatabilities (r = 0.09–0.32. This indicates that a minimum of three repeated records were needed to accurately record average feed intake at a fixed age. To effectively breed for feed intake over the whole growing period, it is necessary to determine average feed intake at different ages, since there were only moderate phenotypic and genetic correlations between average daily feed intake recorded at 140 g, 750 g and 2000 g wet mass. Heritability for average daily feed intake was low (average h2 = 0.10, indicating that modest genetic changes can be obtained in response to selection. It was concluded that selection to genetically change long-term feed intake can be successful, yet repeated observations at several life stages are needed to ensure the accuracy of feed intake estimates and the efficiency of selection.

Facilitating the selection and creation of accurate interatomic potentials with robust tools and characterization

Science.gov (United States)

Trautt, Zachary T.; Tavazza, Francesca; Becker, Chandler A.

2015-10-01

The Materials Genome Initiative seeks to significantly decrease the cost and time of development and integration of new materials. Within the domain of atomistic simulations, several roadblocks stand in the way of reaching this goal. While the NIST Interatomic Potentials Repository hosts numerous interatomic potentials (force fields), researchers cannot immediately determine the best choice(s) for their use case. Researchers developing new potentials, specifically those in restricted environments, lack a comprehensive portfolio of efficient tools capable of calculating and archiving the properties of their potentials. This paper elucidates one solution to these problems, which uses Python-based scripts that are suitable for rapid property evaluation and human knowledge transfer. Calculation results are visible on the repository website, which reduces the time required to select an interatomic potential for a specific use case. Furthermore, property evaluation scripts are being integrated with modern platforms to improve discoverability and access of materials property data. To demonstrate these scripts and features, we will discuss the automation of stacking fault energy calculations and their application to additional elements. While the calculation methodology was developed previously, we are using it here as a case study in simulation automation and property calculations. We demonstrate how the use of Python scripts allows for rapid calculation in a more easily managed way where the calculations can be modified, and the results presented in user-friendly and concise ways. Additionally, the methods can be incorporated into other efforts, such as openKIM.

Facilitating the selection and creation of accurate interatomic potentials with robust tools and characterization

International Nuclear Information System (INIS)

Trautt, Zachary T; Tavazza, Francesca; Becker, Chandler A

2015-01-01

The Materials Genome Initiative seeks to significantly decrease the cost and time of development and integration of new materials. Within the domain of atomistic simulations, several roadblocks stand in the way of reaching this goal. While the NIST Interatomic Potentials Repository hosts numerous interatomic potentials (force fields), researchers cannot immediately determine the best choice(s) for their use case. Researchers developing new potentials, specifically those in restricted environments, lack a comprehensive portfolio of efficient tools capable of calculating and archiving the properties of their potentials. This paper elucidates one solution to these problems, which uses Python-based scripts that are suitable for rapid property evaluation and human knowledge transfer. Calculation results are visible on the repository website, which reduces the time required to select an interatomic potential for a specific use case. Furthermore, property evaluation scripts are being integrated with modern platforms to improve discoverability and access of materials property data. To demonstrate these scripts and features, we will discuss the automation of stacking fault energy calculations and their application to additional elements. While the calculation methodology was developed previously, we are using it here as a case study in simulation automation and property calculations. We demonstrate how the use of Python scripts allows for rapid calculation in a more easily managed way where the calculations can be modified, and the results presented in user-friendly and concise ways. Additionally, the methods can be incorporated into other efforts, such as openKIM. (paper)

Estrogenic activity, selected plasticizers and potential health risks associated with bottled water in South Africa.

Science.gov (United States)

Aneck-Hahn, Natalie H; Van Zijl, Magdalena C; Swart, Pieter; Truebody, Barry; Genthe, Bettina; Charmier, Jessica; Jager, Christiaan De

2018-04-01

Potential endocrine disrupting chemicals (EDCs) are present in bottled water from various countries. In South Africa (SA), increased bottled water consumption and concomitant increases in plastic packaging create important consequences for public health. This study aimed to screen SA bottled water for estrogenic activity, selected target chemicals and assessing potential health risks. Ten bottled water brands were exposed to 20 °C and 40 °C over 10 days. Estrogenic activity was assessed using the recombinant yeast estrogen screen (YES) and the T47D-KBluc reporter gene assay. Solid phase extracts of samples were analyzed for bis(2-ethylhexyl) adipate (DEHA), selected phthalates, bisphenol-A (BPA), 4-nonylphenol (4-NP), 17β-estradiol (E 2 ), estrone (E 1 ), and ethynylestradiol (EE 2 ) using gas chromatography-mass spectrophotometry. Using a scenario-based health risk assessment, human health risks associated with bottled water consumption were evaluated. Estrogenic activity was detected at 20 °C (n = 2) and at 40 °C (n = 8). Estradiol equivalent (EEq) values ranged from 0.001 to 0.003 ng/L. BPA concentrations ranged from 0.9 ng/L to 10.06 ng/L. Although EEqs and BPA concentrations were higher in bottled water stored at 40 °C compared to 20 °C, samples posed an acceptable risk for a lifetime of exposure. Irrespective of temperature, bottled water from SA contained chemicals with acceptable health risks.

Substrate selection for fundamental studies of electrocatalysts and photoelectrodes: inert potential windows in acidic, neutral, and basic electrolyte.

Directory of Open Access Journals (Sweden)

Jesse D Benck

Full Text Available The selection of an appropriate substrate is an important initial step for many studies of electrochemically active materials. In order to help researchers with the substrate selection process, we employ a consistent experimental methodology to evaluate the electrochemical reactivity and stability of seven potential substrate materials for electrocatalyst and photoelectrode evaluation. Using cyclic voltammetry with a progressively increased scan range, we characterize three transparent conducting oxides (indium tin oxide, fluorine-doped tin oxide, and aluminum-doped zinc oxide and four opaque conductors (gold, stainless steel 304, glassy carbon, and highly oriented pyrolytic graphite in three different electrolytes (sulfuric acid, sodium acetate, and sodium hydroxide. We determine the inert potential window for each substrate/electrolyte combination and make recommendations about which materials may be most suitable for application under different experimental conditions. Furthermore, the testing methodology provides a framework for other researchers to evaluate and report the baseline activity of other substrates of interest to the broader community.

Potential Response to Selection of HSP70 as a Component of Innate Immunity in the Abalone Haliotis rufescens

Science.gov (United States)

Brokordt, Katherina B.; González, Roxana C.; Farías, William J.; Winkler, Federico M.

2015-01-01

Assessing components of the immune system may reflect disease resistance. In some invertebrates, heat shock proteins (HSPs) are immune effectors and have been described as potent activators of the innate immune response. Several diseases have become a threat to abalone farming worldwide; therefore, increasing disease resistance is considered to be a long-term goal for breeding programs. A trait will respond to selection only if it is determined partially by additive genetic variation. The aim of this study was to estimate the heritability (h 2) and the additive genetic coefficient of variation (CV A) of HSP70 as a component of innate immunity of the abalone Haliotis rufescens, in order to assess its potential response to selection. These genetic components were estimated for the variations in the intracellular (in haemocytes) and extracellular (serum) protein levels of HSP70 in response to an immunostimulant agent in 60 full-sib families of H. rufescens. Levels of HSP70 were measured twice in the same individuals, first when they were young and again when they were pre-harvest adults, to estimate the repeatability (R), the h 2 and the potential response to selection of these traits at these life stages. High HSP70 levels were observed in abalones subjected to immunostimulation in both the intracellular and extracellular haemolymph fractions. This is the first time that changes in serum levels of HSP70 have been reported in response to an immune challenge in molluscs. HSP70 levels in both fractions and at both ages showed low h 2 and R, with values that were not significantly different from zero. However, HSP70 induced levels had a CV A of 13.3–16.2% in young adults and of 2.7–8.1% in pre-harvest adults. Thus, despite its low h 2, HSP70 synthesis in response to an immune challenge in red abalone has the potential to evolve through selection because of its large phenotypic variation and the presence of additive genetic variance, especially in young animals. PMID

Potential Response to Selection of HSP70 as a Component of Innate Immunity in the Abalone Haliotis rufescens.

Directory of Open Access Journals (Sweden)

Katherina B Brokordt

Full Text Available Assessing components of the immune system may reflect disease resistance. In some invertebrates, heat shock proteins (HSPs are immune effectors and have been described as potent activators of the innate immune response. Several diseases have become a threat to abalone farming worldwide; therefore, increasing disease resistance is considered to be a long-term goal for breeding programs. A trait will respond to selection only if it is determined partially by additive genetic variation. The aim of this study was to estimate the heritability (h2 and the additive genetic coefficient of variation (CVA of HSP70 as a component of innate immunity of the abalone Haliotis rufescens, in order to assess its potential response to selection. These genetic components were estimated for the variations in the intracellular (in haemocytes and extracellular (serum protein levels of HSP70 in response to an immunostimulant agent in 60 full-sib families of H. rufescens. Levels of HSP70 were measured twice in the same individuals, first when they were young and again when they were pre-harvest adults, to estimate the repeatability (R, the h2 and the potential response to selection of these traits at these life stages. High HSP70 levels were observed in abalones subjected to immunostimulation in both the intracellular and extracellular haemolymph fractions. This is the first time that changes in serum levels of HSP70 have been reported in response to an immune challenge in molluscs. HSP70 levels in both fractions and at both ages showed low h2 and R, with values that were not significantly different from zero. However, HSP70 induced levels had a CVA of 13.3-16.2% in young adults and of 2.7-8.1% in pre-harvest adults. Thus, despite its low h2, HSP70 synthesis in response to an immune challenge in red abalone has the potential to evolve through selection because of its large phenotypic variation and the presence of additive genetic variance, especially in young animals.

Effects of potential partners' physical attractiveness and socioeconomic status on sexuality and partner selection.

Science.gov (United States)

Townsend, J M; Levy, G D

1990-04-01

Male (n = 170) and female (n = 212) college students viewed photographs, which had been prerated for physical attractiveness, of three opposite-sex individuals. These photographs were paired with three levels of occupational status and income. Subjects indicated their willingness to engage in relationships of varying levels of sexual intimacy and marital potential with the portrayed individuals. Analyses of variance, correlations, and trend analyses supported the hypotheses. Compared to men, women are more likely to prefer or insist that sexual intercourse occur in relationships that involve affection and marital potential, and women place more emphasis than men do on partners' SES in such relationships. Consequently, men's SES and their willingness and ability to invest affection and resources in relationships may often outweigh the effects of their physical attractiveness in women's actual selection of partners. These results and the literature reviewed are more consistent with parental investment theory than with the view that these sex differences are solely the result of differential access to resources and differential socialization.

Identifying Potential Conservation Corridors Along the Mongolia-Russia Border Using Resource Selection Functions: A Case Study on Argali Sheep

Directory of Open Access Journals (Sweden)

Buyanaa Chimeddorj

2013-12-01

Full Text Available The disruption of animal movements is known to affect wildlife populations, particularly large bodied, free-ranging mammals that require large geographic ranges to survive. Corridors commonly connect fragmented wildlife populations and their habitats, yet identifying corridors rarely uses data on habitat selection and movements of target species. New technologies and analytical tools make it possible to better integrate landscape patterns with spatial behavioral data. We show how resource selection functions can describe habitat suitability using continuous and multivariate metrics to determine potential wildlife movement corridors. During 2005–2010, we studied movements of argali sheep ( Ovis ammon near the Mongolia-Russia border using radio-telemetry and modeled their spatial distribution in relation to landscape features to create a spatially explicit habitat suitability surface to identify potential transboundary conservation corridors. Argali sheep habitat selection in western Mongolia positively correlated with elevation, ruggedness index, and distance to border. In other words, argali were tended use areas with higher elevation, rugged topography, and distances farther from the international border. We suggest that these spatial modeling approaches offer ways to design and identify wildlife corridors more objectively and holistically, and can be applied to many other target species.

Polarized radiative transfer through terrestrial atmosphere accounting for rotational Raman scattering

Science.gov (United States)

Lelli, Luca; Rozanov, Vladimir V.; Vountas, Marco; Burrows, John P.

2017-10-01

This paper is devoted to the phenomenological derivation of the vector radiative transfer equation (VRTE) accounting for first-order source terms of rotational Raman scattering (RRS), which is responsible for the in-filling of Fraunhofer and telluric lines by inelastic scattered photons. The implementation of the solution of the VRTE within the framework of the forward-adjoint method is given. For the Ca II and the oxygen A-band (O2 A) spectral windows, values of reflectance, degree of linear polarization (DOLP) and in-filling, in zenith and nadir geometry, are compared with results given in literature. Moreover, the dependence of these quantities on the columnar loading and vertical layering of non-spherical dust aerosols is investigated, together with their changes as function of two habits of ice crystals, modeled as regular icosahedra and severely rough aggregated columns. Bi-directional effects of an underlying polarizing surface are accounted for. The forward simulations are performed for one selected wavelength in the continuum and one in the strong absorption of the O2 A, as their combination can be exploited for the spaceborne retrieval of aerosol and cloud properties. For this reason, we also mimic seasonal maps of reflectance, DOLP and in-filling, that are prototypical measurements of the Ultraviolet-Visible-Near Infrared (UVN) sensor, at a nominal spectral resolution of 0.12 nm. UVN is the core payload of the upcoming European Sentinel-4 mission, that will observe Europe in geostationary orbit for air quality monitoring purposes. In general, in the core of O2 A, depending on the optical thickness and altitude of the scatterers, we find RRS-induced in-filling values ranging from 1.3% to 1.8%, while DOLP decreases by 1%. Conversely, while negligible differences of RRS in-filling are calculated with different ice crystal habits, the severely rough aggregated column model can reduce DOLP by a factor up to 10%. The UVN maps of in-filling show values varying

Bacteria Associated to Plants Naturally Selected in a Historical PCB Polluted Soil Show Potential to Sustain Natural Attenuation.

Science.gov (United States)

Vergani, Lorenzo; Mapelli, Francesca; Marasco, Ramona; Crotti, Elena; Fusi, Marco; Di Guardo, Antonio; Armiraglio, Stefano; Daffonchio, Daniele; Borin, Sara

2017-01-01

The exploitation of the association between plants and microorganisms is a promising approach able to boost natural attenuation processes for soil clean-up in vast polluted areas characterized by mixed chemical contamination. We aimed to explore the selection of root-associated bacterial communities driven by different plant species spontaneously established in abandoned agricultural soils within a historical polluted site in north Italy. The site is highly contaminated by chlorinated persistent organic pollutants, mainly constituted by polychlorobiphenyls (PCBs), together with heavy metals and metalloids, in variable concentrations and uneven distribution. The overall structure of the non-vegetated and root-associated soil fractions bacterial communities was described by high-throughput sequencing of the 16S rRNA gene, and a collection of 165 rhizobacterial isolates able to use biphenyl as unique carbon source was assayed for plant growth promotion (PGP) traits and bioremediation potential. The results showed that the recruitment of specific bacterial communities in the root-associated soil fractions was driven by both soil fractions and plant species, explaining 21 and 18% of the total bacterial microbiome variation, respectively. PCR-based detection in the soil metagenome of bacterial bphA gene, encoding for the biphenyl dioxygenase α subunit, indicated that the soil in the site possesses metabolic traits linked to PCB degradation. Biphenyl-utilizing bacteria isolated from the rhizosphere of the three different plant species showed low phylogenetic diversity and well represented functional traits, in terms of PGP and bioremediation potential. On average, 72% of the strains harbored the bphA gene and/or displayed catechol 2,3-dioxygenase activity, involved in aromatic ring cleavage. PGP traits, including 1-aminocyclopropane-1-carboxylic acid deaminase activity potentially associated to plant stress tolerance induction, were widely distributed among the isolates

Bacteria Associated to Plants Naturally Selected in a Historical PCB Polluted Soil Show Potential to Sustain Natural Attenuation

KAUST Repository

Vergani, Lorenzo

2017-07-25

The exploitation of the association between plants and microorganisms is a promising approach able to boost natural attenuation processes for soil clean-up in vast polluted areas characterized by mixed chemical contamination. We aimed to explore the selection of root-associated bacterial communities driven by different plant species spontaneously established in abandoned agricultural soils within a historical polluted site in north Italy. The site is highly contaminated by chlorinated persistent organic pollutants, mainly constituted by polychlorobiphenyls (PCBs), together with heavy metals and metalloids, in variable concentrations and uneven distribution. The overall structure of the non-vegetated and root-associated soil fractions bacterial communities was described by high-throughput sequencing of the 16S rRNA gene, and a collection of 165 rhizobacterial isolates able to use biphenyl as unique carbon source was assayed for plant growth promotion (PGP) traits and bioremediation potential. The results showed that the recruitment of specific bacterial communities in the root-associated soil fractions was driven by both soil fractions and plant species, explaining 21 and 18% of the total bacterial microbiome variation, respectively. PCR-based detection in the soil metagenome of bacterial bphA gene, encoding for the biphenyl dioxygenase α subunit, indicated that the soil in the site possesses metabolic traits linked to PCB degradation. Biphenyl-utilizing bacteria isolated from the rhizosphere of the three different plant species showed low phylogenetic diversity and well represented functional traits, in terms of PGP and bioremediation potential. On average, 72% of the strains harbored the bphA gene and/or displayed catechol 2,3-dioxygenase activity, involved in aromatic ring cleavage. PGP traits, including 1-aminocyclopropane-1-carboxylic acid deaminase activity potentially associated to plant stress tolerance induction, were widely distributed among the isolates

Bacteria Associated to Plants Naturally Selected in a Historical PCB Polluted Soil Show Potential to Sustain Natural Attenuation

Directory of Open Access Journals (Sweden)

Lorenzo Vergani

2017-07-01

Full Text Available The exploitation of the association between plants and microorganisms is a promising approach able to boost natural attenuation processes for soil clean-up in vast polluted areas characterized by mixed chemical contamination. We aimed to explore the selection of root-associated bacterial communities driven by different plant species spontaneously established in abandoned agricultural soils within a historical polluted site in north Italy. The site is highly contaminated by chlorinated persistent organic pollutants, mainly constituted by polychlorobiphenyls (PCBs, together with heavy metals and metalloids, in variable concentrations and uneven distribution. The overall structure of the non-vegetated and root-associated soil fractions bacterial communities was described by high-throughput sequencing of the 16S rRNA gene, and a collection of 165 rhizobacterial isolates able to use biphenyl as unique carbon source was assayed for plant growth promotion (PGP traits and bioremediation potential. The results showed that the recruitment of specific bacterial communities in the root-associated soil fractions was driven by both soil fractions and plant species, explaining 21 and 18% of the total bacterial microbiome variation, respectively. PCR-based detection in the soil metagenome of bacterial bphA gene, encoding for the biphenyl dioxygenase α subunit, indicated that the soil in the site possesses metabolic traits linked to PCB degradation. Biphenyl-utilizing bacteria isolated from the rhizosphere of the three different plant species showed low phylogenetic diversity and well represented functional traits, in terms of PGP and bioremediation potential. On average, 72% of the strains harbored the bphA gene and/or displayed catechol 2,3-dioxygenase activity, involved in aromatic ring cleavage. PGP traits, including 1-aminocyclopropane-1-carboxylic acid deaminase activity potentially associated to plant stress tolerance induction, were widely distributed

Potential Science and Technology Game Changers for the Ground Warfare of 2050: Selected Projections Made in 2017

Science.gov (United States)

2018-02-01

ARL-TR-8283 ● FEB 2018 US Army Research Laboratory Potential Science and Technology Game Changers for the Ground Warfare of 2050...Science and Technology Game Changers for the Ground Warfare of 2050: Selected Projections Made in 2017 by Alexander Kott Office of the Director...Brian Sadler Vehicle Technology Directorate, ARL Ananthram Swami Computational and Information Sciences Directorate, ARL Approved for

Characterization of silver nanoparticles in selected consumer products and its relevance for predicting children’s potential exposures

Science.gov (United States)

Tulve, Nicolle S.; Stefaniak, Aleksandr B.; Vance, Marina E.; Rogers, Kim; Mwilu, Samuel; LeBouf, Ryan F.; Schwegler-Berry, Diane; Willis, Robert; Thomas, Treye A.; Marr, Linsey C.

2015-01-01

Due to their antifungal, antibacterial, antiviral, and antimicrobial properties, silver nanoparticles (AgNPs) are used in consumer products intended for use by children or in the home. Children may be especially affected by the normal use of consumer products because of their physiological functions, developmental stage, and activities and behaviors. Despite much research to date, children’s potential exposures to AgNPs are not well characterized. Our objectives were to characterize selected consumer products containing AgNPs and to use the data to estimate a child’s potential non-dietary ingestion exposure. We identified and cataloged 165 consumer products claiming to contain AgNPs that may be used by or near children or found in the home. Nineteen products (textile, liquid, plastic) were selected for further analysis. We developed a tiered analytical approach to determine silver content, form (particulate or ionic), size, morphology, agglomeration state, and composition. Silver was detected in all products except one sippy cup body. Among products in a given category, silver mass contributions were highly variable and not always uniformly distributed within products, highlighting the need to sample multiple areas of a product. Electron microscopy confirmed the presence of AgNPs. Using this data, a child’s potential non-dietary ingestion exposure to AgNPs when drinking milk formula from a sippy cup is 1.53 μg Ag/kg. Additional research is needed to understand the number and types of consumer products containing silver and the concentrations of silver in these products in order to more accurately predict children’s potential aggregate and cumulative exposures to AgNPs. PMID:25747543

How do how internal and external processes affect the behaviors of coupled marsh mudflat systems; infill, stabilize, retreat, or drown?

Science.gov (United States)

Carr, J. A.; Mariotti, G.; Wiberg, P.; Fagherazzi, S.; McGlathery, K.

2013-12-01

Intertidal coastal environments are prone to changes induced by sea level rise, increases in storminess, and anthropogenic disturbances. It is unclear how changes in external drivers may affect the dynamics of low energy coastal environments because their response is non-linear, and characterized by many thresholds and discontinuities. As such, process-based modeling of the ecogeomorphic processes underlying the dynamics of these ecosystems is useful, not only to predict their change through time, but also to generate new hypotheses and research questions. Here, a three-point dynamic model was developed to investigate how internal and external processes affect the behavior of coupled marsh mudflat systems. The model directly incorporates ecogeomorphological feedbacks between wind waves, salt marsh vegetation, allochthonous sediment loading, tidal flat vegetation and sea level rise. The model was applied to examine potential trajectories of salt marshes on the Eastern seaboard of the United States, including those in the Plum Island Ecosystems (PIE), Virginia Coast Reserve (VCR) and Georgia Coastal Ecosystems (GCE) long term ecological research (LTER) sites. While these sites are undergoing similar rates of relative sea level rise (RSLR), they have distinct differences in site specific environmental drivers including tides, wind waves, allochthonous sediment supply and the presence or absence of seagrass. These differences lead to the emergence of altered behaviors in the coupled salt marsh-tidal flat system. For marsh systems without seagrass or significant riverine sediment supply, conditions similar to those at PIE, results indicated that horizontal and vertical marsh evolution respond in opposing ways to wave induced processes. Marsh horizontal retreat is triggered by large mudflats and strong winds, whereas small mudflats and weak winds reduce the sediment supply to the salt marsh, decreasing its capability to keep pace with sea level rise. Marsh expansion and

Probabilistic risk model to assess the potential for resistance selection following the use of anti-microbial medicated feed in pigs.

Science.gov (United States)

Filippitzi, Maria Eleni; Chantziaras, Ilias; Devreese, Mathias; Dewulf, Jeroen

2018-05-30

The cross-contamination of non-medicated feed with residues of anti-microbials (AM) causes a public and animal health concern associated with the potential for selection and dissemination of resistance. To analyse the associated risks, a probabilistic model was built using @Risk® (Palisade Corporation®) to show the potential extent of the effect of cross-contaminated pig feed on resistance selection. The results of the model include estimations of the proportion of pigs per production stage with residues of doxycycline, chlortetracycline, sulfadiazine and trimethoprim in their intestinal contents, as a result of exposure to cross-contaminated feed with different carry-over levels, in Belgium. By using a semi-quantitative approach, these estimations were combined with experimental data on AM concentrations associated with potential for resistance-selection pressure. Based on this model, it is estimated that 7.76% (min = 1.67; max = 36.94) of sows, 4.23% (min = 1.01%; max = 18.78%) of piglets and 2.8% (min = 0.51%; max = 14.9%) of fatteners in Belgium have residues of doxycycline in their intestinal tract due to consumption of feed with at least 1% carry-over. These values were estimated to be almost triple for sulfadiazine, but substantially lower for chlortetracycline and trimethoprim. Doxycycline concentrations as low as 1 mg/L (corresponding to consumed feed with at least 1% carry-over) can select for resistant porcine commensal Escherichia coli in vitro and in vivo. Conclusions on this risk could not be drawn for other AM at this stage, due to the lack of data on concentrations associated with resistance development. However, since the possibility of resistance mechanisms (e.g. co-selection) occurring cannot be excluded, the results of this model highlight that the use of AM medicated feed should be minimised where possible. In case of medicated feed production, good practice should be followed thoroughly at all levels of production, distribution

Selection on start codons in prokaryotes and potential compensatory nucleotide substitutions.

Science.gov (United States)

Belinky, Frida; Rogozin, Igor B; Koonin, Eugene V

2017-09-29

Reconstruction of the evolution of start codons in 36 groups of closely related bacterial and archaeal genomes reveals purifying selection affecting AUG codons. The AUG starts are replaced by GUG and especially UUG significantly less frequently than expected under the neutral expectation derived from the frequencies of the respective nucleotide triplet substitutions in non-coding regions and in 4-fold degenerate sites. Thus, AUG is the optimal start codon that is actively maintained by purifying selection. However, purifying selection on start codons is significantly weaker than the selection on the same codons in coding sequences, although the switches between the codons result in conservative amino acid substitutions. The only exception is the AUG to UUG switch that is strongly selected against among start codons. Selection on start codons is most pronounced in evolutionarily conserved, highly expressed genes. Mutation of the start codon to a sub-optimal form (GUG or UUG) tends to be compensated by mutations in the Shine-Dalgarno sequence towards a stronger translation initiation signal. Together, all these findings indicate that in prokaryotes, translation start signals are subject to weak but significant selection for maximization of initiation rate and, consequently, protein production.

Refrigeration Playbook: Natural Refrigerants; Selecting and Designing Energy-Efficient Commercial Refrigeration Systems That Use Low Global Warming Potential Refrigerants

Energy Technology Data Exchange (ETDEWEB)

Nelson, Caleb [CTA Architects Engineers, Boise, ID (United States); Reis, Chuck [CTA Architects Engineers, Boise, ID (United States); Nelson, Eric [CTA Architects Engineers, Boise, ID (United States); Armer, James [CTA Architects Engineers, Boise, ID (United States); Arthur, Rob [CTA Architects Engineers, Boise, ID (United States); Heath, Richard [CTA Architects Engineers, Boise, ID (United States); Rono, James [CTA Architects Engineers, Boise, ID (United States); Hirsch, Adam [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Doebber, Ian [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2015-03-01

This report provides guidance for selecting and designing energy efficient commercial refrigeration systems using low global warming potential refrigerants. Refrigeration systems are generally the largest energy end use in a supermarket type building, often accounting for more than half of a building's energy consumption.

Towards sustainable settlement growth: A new multi-criteria assessment for implementing environmental targets into strategic urban planning

Energy Technology Data Exchange (ETDEWEB)

Schetke, Sophie, E-mail: schetke@uni-bonn.de [Institute of Geodesy and Geoinformation, Dept. of Urban Planning and Real Estate Management, University of Bonn, Nussallee 1, 53115 Bonn (Germany); Haase, Dagmar, E-mail: dagmar.haase@ufz.de [Humboldt University of Berlin, Department of Geography, Rudower Chaussee 16, 10099 Berlin, Germany, Helmholtz Centre for Environmental Research - UFZ, Department of Computational Landscape Ecology, Permoserstr. 15, 04318 Leipzig (Germany); Koetter, Theo, E-mail: koetter@uni-bonn.de [Institute of Geodesy and Geoinformation, Dept. of Urban Planning and Real Estate Management, University of Bonn, Nussallee 1, 53115 Bonn (Germany)

2012-01-15

For nearly one decade, the German political and research-agenda has been to a large extent determined by the ongoing question of how to limit the expansion of settlement areas around cities in order to preserve natural resources, make settlement growth more sustainable and to strengthen the re-use of existing inner-urban areas (see a.o. Koetter et al. 2009a, 2010; Schetke et al. 2009, 2010b). What is already under discussion within the international literature are the recommendations of the German Council for Sustainability to quantitatively reduce the daily greenfield consumption from the current rate of over 100 ha per day to a rate of 30 ha per day in 2020 and to bring urban infill development up to a ratio of 3:1 with greenfield development (German Council for Sustainability, 2004).). This paper addresses the added value beyond those abstract political targets and presents an innovative, multi-criteria assessment (MCA) of greenfield and infill sites to evaluate their sustainability and resource efficiency. MCA development and its incorporation into a Decision Support System (DSS) were accomplished by utilising a stakeholder-driven approach. The resulting tool can be applied in preparing and revising land-use plans. The paper presents the concept and the development process of the MCA-DSS. Test runs with planners prove that the evaluation of potential housing sites using individually weighted environmental indicators helps to identify those strategies of housing development that accord most closely with sustainability goals. The tests further show that the development of greenfield sites generally exhibits less sustainability than that of infill sites. - Highlights: Black-Right-Pointing-Pointer This paper presents an innovative, multi-criteria assessment (MCA) of greenfield and infill sites. Black-Right-Pointing-Pointer The MCA evaluates sustainability and resource efficiency of potential housing sites in a stakeholder-driven approach. Black

Towards sustainable settlement growth: A new multi-criteria assessment for implementing environmental targets into strategic urban planning

International Nuclear Information System (INIS)

Schetke, Sophie; Haase, Dagmar; Kötter, Theo

2012-01-01

For nearly one decade, the German political and research-agenda has been to a large extent determined by the ongoing question of how to limit the expansion of settlement areas around cities in order to preserve natural resources, make settlement growth more sustainable and to strengthen the re-use of existing inner-urban areas (see a.o. Kötter et al. 2009a, 2010; Schetke et al. 2009, 2010b). What is already under discussion within the international literature are the recommendations of the German Council for Sustainability to quantitatively reduce the daily greenfield consumption from the current rate of over 100 ha per day to a rate of 30 ha per day in 2020 and to bring urban infill development up to a ratio of 3:1 with greenfield development (German Council for Sustainability, 2004).). This paper addresses the added value beyond those abstract political targets and presents an innovative, multi-criteria assessment (MCA) of greenfield and infill sites to evaluate their sustainability and resource efficiency. MCA development and its incorporation into a Decision Support System (DSS) were accomplished by utilising a stakeholder-driven approach. The resulting tool can be applied in preparing and revising land-use plans. The paper presents the concept and the development process of the MCA-DSS. Test runs with planners prove that the evaluation of potential housing sites using individually weighted environmental indicators helps to identify those strategies of housing development that accord most closely with sustainability goals. The tests further show that the development of greenfield sites generally exhibits less sustainability than that of infill sites. - Highlights: ► This paper presents an innovative, multi-criteria assessment (MCA) of greenfield and infill sites. ► The MCA evaluates sustainability and resource efficiency of potential housing sites in a stakeholder-driven approach. ► Test runs with planners identified prominent environmental indicators

Selectivity control of carbonylation of methanol to dimethyl oxalate and dimethyl carbonate over gold anode by electrochemical potential.

Science.gov (United States)

Funakawa, Akiyasu; Yamanaka, Ichiro; Takenaka, Sakae; Otsuka, Kiyoshi

2004-05-05

New and unique electrocatalysis of gold for the carbonylation of methanol to dimethyl oxalate (DMO) and dimethyl carbonate (DMC) was found. The selectivity to DMO and DMC could be controlled over gold anode by electrochemical potential, as you like. Drastic changes of gold electrocatalysis was due to changes of the oxidation state of gold, Au0 or Au3+.

Penalized regression procedures for variable selection in the potential outcomes framework.

Science.gov (United States)

Ghosh, Debashis; Zhu, Yeying; Coffman, Donna L

2015-05-10

A recent topic of much interest in causal inference is model selection. In this article, we describe a framework in which to consider penalized regression approaches to variable selection for causal effects. The framework leads to a simple 'impute, then select' class of procedures that is agnostic to the type of imputation algorithm as well as penalized regression used. It also clarifies how model selection involves a multivariate regression model for causal inference problems and that these methods can be applied for identifying subgroups in which treatment effects are homogeneous. Analogies and links with the literature on machine learning methods, missing data, and imputation are drawn. A difference least absolute shrinkage and selection operator algorithm is defined, along with its multiple imputation analogs. The procedures are illustrated using a well-known right-heart catheterization dataset. Copyright © 2015 John Wiley & Sons, Ltd.

Potential of marker-assisted selection for Tobacco mosaic ...

African Journals Online (AJOL)

Tobacco mosaic tobamovirus (TMV) is one of the most destructive virus threatening worldwide tobacco production. Use of host resistance is the best method of control. The N-gene was introgressed into tobacco from Nicotiana glutinosa to confer hypersensitive resistance to TMV. Phenotypic selection of TMV resistant ...

Geopolymers as potential repair material in tiles conservation

Science.gov (United States)

Geraldes, Catarina F. M.; Lima, Augusta M.; Delgado-Rodrigues, José; Mimoso, João Manuel; Pereira, Sílvia R. M.

2016-03-01

The restoration materials currently used to fill gaps in historical architectural tiles (e.g. lime or organic resin pastes) usually show serious drawbacks in terms of compatibility, effectiveness or durability. The existing solutions do not fully protect Portuguese faïence tiles ( azulejos) in outdoor conditions and frequently result in further deterioration. Geopolymers can be a potential solution for tile lacunae infill, given the chemical-mineralogical similitude to the ceramic body, and also the durability and versatile range of physical properties that can be obtained through the manipulation of their formulation and curing conditions. This work presents and discusses the viability of the use of geopolymeric pastes to fill lacunae in tiles or to act as "cold" cast ceramic tile surrogates reproducing missing tile fragments. The formulation of geopolymers, namely the type of activators, the alumino-silicate source, the quantity of water required for adequate workability and curing conditions, was studied. The need for post-curing desalination was also considered envisaging their application in the restoration of outdoor historical architectural tiles frequently exposed to adverse environmental conditions. The possible advantages and disadvantages of the use of geopolymers in the conservation of tiles are also discussed. The results obtained reveal that geopolymers pastes are a promising material for the restoration of tiles, when compared to other solutions currently in use.

Selective attention and the auditory vertex potential. I - Effects of stimulus delivery rate. II - Effects of signal intensity and masking noise

Science.gov (United States)

Schwent, V. L.; Hillyard, S. A.; Galambos, R.

1976-01-01

The effects of varying the rate of delivery of dichotic tone pip stimuli on selective attention measured by evoked-potential amplitudes and signal detectability scores were studied. The subjects attended to one channel (ear) of tones, ignored the other, and pressed a button whenever occasional targets - tones of a slightly higher pitch were detected in the attended ear. Under separate conditions, randomized interstimulus intervals were short, medium, and long. Another study compared the effects of attention on the N1 component of the auditory evoked potential for tone pips presented alone and when white noise was added to make the tones barely above detectability threshold in a three-channel listening task. Major conclusions are that (1) N1 is enlarged to stimuli in an attended channel only in the short interstimulus interval condition (averaging 350 msec), (2) N1 and P3 are related to different modes of selective attention, and (3) attention selectivity in multichannel listening task is greater when tones are faint and/or difficult to detect.

Chemical and Physical Analysis Methods for Characterizing Tire Crumb Rubber Used in Synthetic Turf Fields

Science.gov (United States)

Tire crumb rubber from recycled tires is widely used as infill material in synthetic turf fields in the United States. Recycled crumb rubber is a complex and potentially variable matrix with many metal, VOC, and SVOC constituents, presenting challenges for characterization and ex...

Explore the Most Potential Supplier’s Selection Determinants in Modern Supply Chain Management

Directory of Open Access Journals (Sweden)

Ming-Yuan Hsieh

2014-01-01

Full Text Available To increment the research reliability, validity, and representativeness, this study creatively cross-employed the factor analysis (FA and the grey relational analysis (GRA methods. The results of the 144 fully completed questionnaires are analyzed by FA and then these results were utilized in second questionnaires design of 15 experts. Furthermore, the results of these second questionnaires were further analyzed by GRA in order to explore the most potential supplier’s selection determinants in the modern supply chain management (MSCM. Beyond a series of measurements, the measured results have induced three contributive findings: (1 the empirical interviewed industrialists reported concern that suppliers have to provide a higher material yield rate and material delivery on time rate for the qualitative increment as well as a higher supplier’s gross margin ROI for the financial stabilization in MSCM; (2 the 15 experts concluded that material insurance rate is an important attribute to estimate risky assessments and the supplier’s gross margin ROI and warehouse operations cost as a percentage of sales are critical elements in the financial evaluations of potential suppliers; and (3 Supplier’s gross margin ROI, outbound freight cost as a percentage of sales, and material insurance rate are the three most decisive determinants in MSCM.

Selection and Characterization of Single Chain Antibody Fragments Specific for Hsp90 as a Potential Cancer Targeting Molecule

Directory of Open Access Journals (Sweden)

Edyta Petters

2015-08-01

Full Text Available Heat shock proteins play an essential role in facilitating malignant transformation and they have been recognized as important factors in human cancers. One of the key elements of the molecular chaperones machinery is Hsp90 and it has recently become a target for anticancer therapeutic approaches. The potential and importance of Hsp90-directed agents becomes apparent when one realizes that disruption of Hsp90 function may influence over 200 oncogenic client proteins. Here, we described the selection and characterization of Hsp90-specific antibody fragments from commercially available Tomlinson I and J phage display libraries. The affinities of Hsp90-binding scFv variants were measured using SPR method. Then, based on the best clone selected, we performed the affinity maturation procedure and obtained valuable Hsp90-specific clones. The selected binders were expressed and applied for immunostaining, ELISA and SPR analysis using model cancer cell lines. All performed experiments confirmed the ability of selected antibodies to interact with the Hsp90. Therefore, the presented Hsp90-specific scFv, might be a starting point for the development of a novel antibody-based strategy targeting cancer.

Selective effects of an octopus toxin on action potentials

Science.gov (United States)

Dulhunty, Angela; Gage, Peter W.

1971-01-01

1. A lethal, water soluble toxin (Maculotoxin, MTX) with a molecular weight less than 540, can be extracted from the salivary glands of an octopus (Hapalochlaena maculosa). 2. MTX blocks action potentials in sartorius muscle fibres of toads without affecting the membrane potential. Delayed rectification is not inhibited by the toxin. 3. At low concentrations (10-6-10-5 g/ml.) MTX blocks action potentials only after a certain number have been elicited. The number of action potentials, which can be defined accurately, depends on the concentration of MTX and the concentration of sodium ions in the extracellular solution. 4. The toxin has no post-synaptic effect at the neuromuscular junction and it is concluded that it blocks neuromuscular transmission by inhibiting action potentials in motor nerve terminals. PMID:4330930

Estimation of Leakage Potential of Selected Sites in Interstate and Tri-State Canals Using Geostatistical Analysis of Selected Capacitively Coupled Resistivity Profiles, Western Nebraska, 2004

Science.gov (United States)

Vrabel, Joseph; Teeple, Andrew; Kress, Wade H.

2009-01-01

With increasing demands for reliable water supplies and availability estimates, groundwater flow models often are developed to enhance understanding of surface-water and groundwater systems. Specific hydraulic variables must be known or calibrated for the groundwater-flow model to accurately simulate current or future conditions. Surface geophysical surveys, along with selected test-hole information, can provide an integrated framework for quantifying hydrogeologic conditions within a defined area. In 2004, the U.S. Geological Survey, in cooperation with the North Platte Natural Resources District, performed a surface geophysical survey using a capacitively coupled resistivity technique to map the lithology within the top 8 meters of the near-surface for 110 kilometers of the Interstate and Tri-State Canals in western Nebraska and eastern Wyoming. Assuming that leakage between the surface-water and groundwater systems is affected primarily by the sediment directly underlying the canal bed, leakage potential was estimated from the simple vertical mean of inverse-model resistivity values for depth levels with geometrically increasing layer thickness with depth which resulted in mean-resistivity values biased towards the surface. This method generally produced reliable results, but an improved analysis method was needed to account for situations where confining units, composed of less permeable material, underlie units with greater permeability. In this report, prepared by the U.S. Geological Survey in cooperation with the North Platte Natural Resources District, the authors use geostatistical analysis to develop the minimum-unadjusted method to compute a relative leakage potential based on the minimum resistivity value in a vertical column of the resistivity model. The minimum-unadjusted method considers the effects of homogeneous confining units. The minimum-adjusted method also is developed to incorporate the effect of local lithologic heterogeneity on water

Discovery of the mineral brucite (magnesium hydroxide) in the tropical calcifying alga Polystrata dura (Peyssonneliales, Rhodophyta).

Science.gov (United States)

Nash, Merinda C; Russell, Bayden D; Dixon, Kyatt R; Liu, Minglu; Xu, Huifang

2015-06-01

Red algae of the family Peyssonneliaceae typically form thin crusts impregnated with aragonite. Here, we report the first discovery of brucite in a thick red algal crust (~1 cm) formed by the peyssonnelioid species Polystrata dura from Papua New Guinea. Cells of P. dura were found to be infilled by the magnesium-rich mineral brucite [Mg(OH)2 ]; minor amounts of magnesite and calcite were also detected. We propose that cell infill may be associated with the development of thick (> ~5 mm) calcified red algal crusts, integral components of tropical biotic reefs. If brucite infill within the P. dura crust enhances resistance to dissolution similarly to crustose coralline algae that infill with dolomite, then these crusts would be more resilient to future ocean acidification than crusts without infill. © 2015 Phycological Society of America.

Effects of 20 Selected Fruits on Ethanol Metabolism: Potential Health Benefits and Harmful Impacts.

Science.gov (United States)

Zhang, Yu-Jie; Wang, Fang; Zhou, Yue; Li, Ya; Zhou, Tong; Zheng, Jie; Zhang, Jiao-Jiao; Li, Sha; Xu, Dong-Ping; Li, Hua-Bin

2016-04-01

The consumption of alcohol is often accompanied by other foods, such as fruits and vegetables. This study is aimed to investigate the effects of 20 selected fruits on ethanol metabolism to find out their potential health benefits and harmful impacts. The effects of the fruits on ethanol metabolism were characterized by the concentrations of ethanol and acetaldehyde in blood, as well as activities of alcohol dehydrogenase and acetaldehyde dehydrogenase in liver of mice. Furthermore, potential health benefits and harmful impacts of the fruits were evaluated by biochemical parameters including aspartate transaminase (AST), alanine transferase (ALT), malondialdehyde, and superoxide dismutase. Generally, effects of these fruits on ethanol metabolism were very different. Some fruits (such as Citrus limon (yellow), Averrhoa carambola, Pyrus spp., and Syzygium samarangense) could decrease the concentration of ethanol in blood. In addition, several fruits (such as Cucumis melo) showed hepatoprotective effects by significantly decreasing AST or ALT level in blood, while some fruits (such as Averrhoa carambola) showed adverse effects. The results suggested that the consumption of alcohol should not be accompanied by some fruits, and several fruits could be developed as functional foods for the prevention and treatment of hangover and alcohol use disorder.

A new occurrence of ambient inclusion trails from the ~1900-million-year-old Gunflint Formation, Ontario: nanocharacterization and testing of potential formation mechanisms.

Science.gov (United States)

Wacey, D; Saunders, M; Kong, C; Kilburn, M R

2016-09-01

Ambient inclusion trails (AITs) are tubular microstructures thought to form when a microscopic mineral crystal is propelled through a fine-grained rock matrix. Here, we report a new occurrence of AITs from a fossilized microbial mat within the 1878-Ma Gunflint Formation, at Current River, Ontario. The AITs are 1-15 μm in diameter, have pyrite as the propelled crystal, are infilled with chlorite and have been propelled through a microquartz (chert) or chlorite matrix. AITs most commonly originate at the boundary between pyrite- and chlorite-rich laminae and chert-filled fenestrae, with pyrite crystals propelled into the fenestrae. A subset of AITs originate within the fenestrae, rooted either within the chert or within patches of chlorite. Sulphur isotope data ((34) S/(32) S) obtained in situ from AIT pyrite have a δ(34) S of -8.5 to +8.0 ‰, indicating a maximum of ~30 ‰ fractionation from Palaeoproterozoic seawater sulphate (δ(34) S ≈ +20 ‰). Organic carbon is common both at the outer margins of the fenestrae and in patches of chlorite where most AITs originate, and can be found in smaller quantities further along some AITs towards the terminal pyrite grain. We infer that pyrite crystals now found within the AITs formed via the action of heterotrophic sulphate-reducing bacteria during early diagenesis within the microbial mat, as pore waters were becoming depleted in seawater sulphate. Gases derived from this process such as CO2 and H2 S were partially trapped within the microbial mat, helping produce birds-eye fenestrae, while rapid microquartz precipitation closed porosity. We propose that propulsion of the pyrite crystals to form AITs was driven by two complementary mechanisms during burial and low-grade metamorphism: firstly, thermal decomposition of residual organic material providing CO2 , and potentially CH4 , as propulsive gases, plus organic acids to locally dissolve the microquartz matrix; and secondly, reactions involving clay minerals that

Evaluation of phenolic content variability, antioxidant, antimicrobial and cytotoxic potential of selected traditional medicinal plants from India

Directory of Open Access Journals (Sweden)

Garima eSingh

2016-03-01

Full Text Available Plants have been used since ancient times as an important source of biologically active substances. The aim of the present study was to investigate the phytochemical constituents (flavonoids and phenolics, antioxidant potential, cytotoxicity against HepG2 (human hepato carcinoma cancer cell lines and the antimicrobial activity of the methanol extract of selected traditional medicinal plants collected from Mizoram, India. A number of phenolic compounds were detected using HPLC-DAD-ESI-TOF-MS, mainly Luteolin, Kaempferol, Myricetin, Gallic Acid, Quercetin and Rutin, some of which have been described for the first time in the selected plants. The total phenolic and flavonoid contents showed high variation ranging from 4.44 to 181.91 µg of Gallic Acid equivalent per milligram DW (GAE/mg DW and 3.17 to 102.2 µg of Quercetin/mg, respectively. The antioxidant capacity was determined by DPPH (IC50 values ranges from 34.22 to 131.4 µg/mL, ABTS (IC50 values ranges from 24.08 to 513.4 µg/mL and reducing power assays. Antimicrobial activity was assayed against gram positive (Staphylococcus aureus, gram negative (Escherichia coli, Pseudomonas aeruginosa and yeast (Candida albicans demonstrating that the methanol extracts of some plants were efficacious antimicrobial agents. Additionally, cytotoxicity was assessed on human hepato carcinoma (HepG2 cancer cell lines and found that the extracts of Albizia lebbeck, Dillenia indica and Bombax ceiba significantly decreased the cell viability at low concentrations with IC50 values of 24.03, 25.09 and 29.66 µg/mL, respectively. This is the first report of detection of phenolic compounds along with antimicrobial, antioxidant and cytotoxic potential of selected medicinal plants from India, which indicates that these plants might be valuable source for human and animal health.

Objective selection of EEG late potentials through residual dependence estimation of independent components

International Nuclear Information System (INIS)

Milanesi, M; James, C J; Martini, N; Menicucci, D; Gemignani, A; Ghelarducci, B; Landini, L

2009-01-01

This paper presents a novel method to objectively select electroencephalographic (EEG) cortical sources estimated by independent component analysis (ICA) in event-related potential (ERP) studies. A proximity measure based on mutual information is employed to estimate residual dependences of the components that are then hierarchically clustered based on these residual dependences. Next, the properties of each group of components are evaluated at each level of the hierarchical tree by two indices that aim to assess both cluster tightness and physiological reliability through a template matching process. These two indices are combined in three different approaches to bring to light the hierarchical structure of the cluster organizations. Our method is tested on a set of experiments with the purpose of enhancing late positive ERPs elicited by emotional picture stimuli. Results suggest that the best way to look for physiologically plausible late positive potential (LPP) sources is to explore in depth the tightness of those clusters that, taken together, best resemble the template. According to our results, after brain sources clustering, LPPs are always identified more accurately than from ensemble-averaged raw data. Since the late components of an ERP involve the same associative areas, regardless of the modality of stimulation or specific tasks administered, the proposed method can be simply adapted to other ERP studies, and extended from psychophysiological studies to pathological or sport training evaluation support

The Federal Research Action Plan on Recycled Tire Crumb Used on Playing Fields and Playgrounds - Background and Exposure Research Goals.

Science.gov (United States)

Concerns have been raised by the public about the safety of recycled tire crumb rubber used in synthetic turf fields and playgrounds in the United States (U.S.). Several studies have been identified that examine potential exposure to tire crumb rubber infill in these settings. Th...

Phenotypic selection in natural populations: what limits directional selection?

Science.gov (United States)

Kingsolver, Joel G; Diamond, Sarah E

2011-03-01

Studies of phenotypic selection document directional selection in many natural populations. What factors reduce total directional selection and the cumulative evolutionary responses to selection? We combine two data sets for phenotypic selection, representing more than 4,600 distinct estimates of selection from 143 studies, to evaluate the potential roles of fitness trade-offs, indirect (correlated) selection, temporally varying selection, and stabilizing selection for reducing net directional selection and cumulative responses to selection. We detected little evidence that trade-offs among different fitness components reduced total directional selection in most study systems. Comparisons of selection gradients and selection differentials suggest that correlated selection frequently reduced total selection on size but not on other types of traits. The direction of selection on a trait often changes over time in many temporally replicated studies, but these fluctuations have limited impact in reducing cumulative directional selection in most study systems. Analyses of quadratic selection gradients indicated stabilizing selection on body size in at least some studies but provided little evidence that stabilizing selection is more common than disruptive selection for most traits or study systems. Our analyses provide little evidence that fitness trade-offs, correlated selection, or stabilizing selection strongly constrains the directional selection reported for most quantitative traits.

Biomineral repair of abalone shell apertures.

Science.gov (United States)

Cusack, Maggie; Guo, Dujiao; Chung, Peter; Kamenos, Nicholas A

2013-08-01

The shell of the gastropod mollusc, abalone, is comprised of nacre with an outer prismatic layer that is composed of either calcite or aragonite or both, depending on the species. A striking characteristic of the abalone shell is the row of apertures along the dorsal margin. As the organism and shell grow, new apertures are formed and the preceding ones are filled in. Detailed investigations, using electron backscatter diffraction, of the infill in three species of abalone: Haliotis asinina, Haliotis gigantea and Haliotis rufescens reveals that, like the shell, the infill is composed mainly of nacre with an outer prismatic layer. The infill prismatic layer has identical mineralogy as the original shell prismatic layer. In H. asinina and H. gigantea, the prismatic layer of the shell and infill are made of aragonite while in H. rufescens both are composed of calcite. Abalone builds the infill material with the same high level of biological control, replicating the structure, mineralogy and crystallographic orientation as for the shell. The infill of abalone apertures presents us with insight into what is, effectively, shell repair. Copyright © 2013 Elsevier Inc. All rights reserved.

Catalytic Destruction of a Surrogate Organic Hazardous Air Pollutant as a Potential Co-benefit for Coal-fired Selective Catalyst Reduction Systems

Science.gov (United States)

Catalytic destruction of benzene (C6H6), a surrogate for organic hazardous air pollutants (HAPs) produced from coal combustion, was investigated using a commercial selective catalytic reduction (SCR) catalyst for evaluating the potential co-benefit of the SCR technology for reduc...

Bone ingrowth potential of electron beam and selective laser melting produced trabecular-like implant surfaces with and without a biomimetic coating

NARCIS (Netherlands)

Biemond, J.E.; Hannink, G.; Verdonschot, Nicolaas Jacobus Joseph; Buma, P.

2013-01-01

The bone ingrowth potential of trabecular-like implant surfaces produced by either selective laser melting (SLM) or electron beam melting (EBM), with or without a biomimetic calciumphosphate coating, was examined in goats. For histological analysis and histomorphometry of bone ingrowth depth and

Nanoporous spongy graphene: Potential applications for hydrogen adsorption and selective gas separation

Energy Technology Data Exchange (ETDEWEB)

Kostoglou, Nikolaos, E-mail: nikolaos.kostoglou@stud.unileoben.ac.at [Department of Mechanical and Manufacturing Engineering, University of Cyprus, 1678 Nicosia (Cyprus); Department of Physical Metallurgy and Materials Testing, Montanuniversität Leoben, 8700 Leoben (Austria); Constantinides, Georgios [Research Unit for Nanostructured Materials Systems, Department of Mechanical Engineering and Materials Science and Engineering, Cyprus University of Technology, 3036 Lemesos (Cyprus); Charalambopoulou, Georgia; Steriotis, Theodore [National Center for Scientific Research Demokritos, Agia Paraskevi Attikis, 15310 Athens (Greece); Polychronopoulou, Kyriaki [Department of Mechanical Engineering, Khalifa University of Science, Technology and Research, Abu Dhabi (United Arab Emirates); Li, Yuanqing; Liao, Kin [Department of Aerospace Engineering, Khalifa University of Science, Technology and Research, Abu Dhabi (United Arab Emirates); Ryzhkov, Vladislav [Nanotube Production Department, Fibrtec Incorporation, TX, 75551 Atlanta (United States); Mitterer, Christian [Department of Physical Metallurgy and Materials Testing, Montanuniversität Leoben, 8700 Leoben (Austria); Rebholz, Claus, E-mail: claus@ucy.ac.cy [Department of Mechanical and Manufacturing Engineering, University of Cyprus, 1678 Nicosia (Cyprus)

2015-12-01

In the present work, a nanoporous (pore width ~ 0.7 nm) graphene-based sponge-like material with large surface area (~ 350 m{sup 2}/g) was synthesized by wet chemical reduction of graphene oxide in combination with freeze-drying. Surface morphology and elemental composition were studied by scanning and transmission electron microscopy combined with energy dispersive X-ray spectroscopy. Surface chemistry was qualitatively examined by Fourier-transform infrared spectroscopy, while the respective structure was investigated by X-ray diffraction analysis. Textural properties, including Brunauer–Emmet–Teller (BET) surface area, micropore volume and surface area as well as pore size distribution, were deduced from nitrogen gas adsorption/desorption data obtained at 77 K and up to 1 bar. Potential use of the spongy graphene for gas storage and separation applications was preliminarily assessed by low-pressure (0–1 bar) H{sub 2}, CO{sub 2} and CH{sub 4} sorption measurements at different temperatures (77, 273 and 298 K). The adsorption capacities for each gas were evaluated up to ~ 1 bar, the isosteric enthalpies of adsorption for CO{sub 2} (28–33 kJ/mol) and CH{sub 4} (30–38 kJ/mol) were calculated using the Clausius–Clapeyron equation, while the CO{sub 2}/CH{sub 4} gas selectivity (up to 95:1) was estimated using the Ideal Adsorbed Solution Theory (IAST). - Highlights: • Nanoporous sponge produced by chemical reduction of graphene oxide and freeze-drying • Characterization performed using SEM, EDS, TEM, FT-IR, BET and XRD methods • Gas storage performance evaluated towards H{sub 2}, CO{sub 2} and CH{sub 4} adsorption up to 1 bar • CO{sub 2} over CH{sub 4} gas selectivity estimated between 45 and 95 at 273 K using the IAST model.

Nanoporous spongy graphene: Potential applications for hydrogen adsorption and selective gas separation

International Nuclear Information System (INIS)

Kostoglou, Nikolaos; Constantinides, Georgios; Charalambopoulou, Georgia; Steriotis, Theodore; Polychronopoulou, Kyriaki; Li, Yuanqing; Liao, Kin; Ryzhkov, Vladislav; Mitterer, Christian; Rebholz, Claus

2015-01-01

In the present work, a nanoporous (pore width ~ 0.7 nm) graphene-based sponge-like material with large surface area (~ 350 m"2/g) was synthesized by wet chemical reduction of graphene oxide in combination with freeze-drying. Surface morphology and elemental composition were studied by scanning and transmission electron microscopy combined with energy dispersive X-ray spectroscopy. Surface chemistry was qualitatively examined by Fourier-transform infrared spectroscopy, while the respective structure was investigated by X-ray diffraction analysis. Textural properties, including Brunauer–Emmet–Teller (BET) surface area, micropore volume and surface area as well as pore size distribution, were deduced from nitrogen gas adsorption/desorption data obtained at 77 K and up to 1 bar. Potential use of the spongy graphene for gas storage and separation applications was preliminarily assessed by low-pressure (0–1 bar) H_2, CO_2 and CH_4 sorption measurements at different temperatures (77, 273 and 298 K). The adsorption capacities for each gas were evaluated up to ~ 1 bar, the isosteric enthalpies of adsorption for CO_2 (28–33 kJ/mol) and CH_4 (30–38 kJ/mol) were calculated using the Clausius–Clapeyron equation, while the CO_2/CH_4 gas selectivity (up to 95:1) was estimated using the Ideal Adsorbed Solution Theory (IAST). - Highlights: • Nanoporous sponge produced by chemical reduction of graphene oxide and freeze-drying • Characterization performed using SEM, EDS, TEM, FT-IR, BET and XRD methods • Gas storage performance evaluated towards H_2, CO_2 and CH_4 adsorption up to 1 bar • CO_2 over CH_4 gas selectivity estimated between 45 and 95 at 273 K using the IAST model

Topogram-based automated selection of the tube potential and current in thoraco-abdominal trauma CT - a comparison to fixed kV with mAs modulation alone

International Nuclear Information System (INIS)

Frellesen, Claudia; Stock, Wenzel; Kerl, J.M.; Lehnert, Thomas; Wichmann, Julian L.; Beeres, Martin; Schulz, Boris; Bodelle, Boris; Vogl, Thomas J.; Nau, Christoph; Geiger, Emanuel; Wutzler, Sebastian; Ackermann, Hanns; Bauer, Ralf W.

2014-01-01

To investigate the impact of automated attenuation-based tube potential selection on image quality and exposure parameters in polytrauma patients undergoing contrast-enhanced thoraco-abdominal CT. One hundred patients were examined on a 16-slice device at 120 kV with 190 ref.mAs and automated mA modulation only. Another 100 patients underwent 128-slice CT with automated mA modulation and topogram-based automated tube potential selection (autokV) at 100, 120 or 140 kV. Volume CT dose index (CTDI vol ), dose-length product (DLP), body diameters, noise, signal-to-noise ratio (SNR) and subjective image quality were compared. In the autokV group, 100 kV was automatically selected in 82 patients, 120 kV in 12 patients and 140 kV in 6 patients. Patient diameters increased with higher kV settings. The median CTDI vol (8.3 vs. 12.4 mGy; -33 %) and DLP (594 vs. 909 mGy cm; -35 %) in the entire autokV group were significantly lower than in the group with fixed 120 kV (p < 0.05 for both). Image quality remained at a constantly high level at any selected kV level. Topogram-based automated selection of the tube potential allows for significant dose savings in thoraco-abdominal trauma CT while image quality remains at a constantly high level. (orig.)

Topogram-based automated selection of the tube potential and current in thoraco-abdominal trauma CT - a comparison to fixed kV with mAs modulation alone

Energy Technology Data Exchange (ETDEWEB)

Frellesen, Claudia; Stock, Wenzel; Kerl, J.M.; Lehnert, Thomas; Wichmann, Julian L.; Beeres, Martin; Schulz, Boris; Bodelle, Boris; Vogl, Thomas J. [Clinic of the Goethe University, Department of Diagnostic and Interventional Radiology, Frankfurt (Germany); Nau, Christoph; Geiger, Emanuel; Wutzler, Sebastian [Clinic of the Goethe University, Department of Trauma, Hand and Reconstructive Surgery, Frankfurt (Germany); Ackermann, Hanns [Clinic of the Goethe University, Department of Biostatistics and Mathematical Modelling, Frankfurt (Germany); Bauer, Ralf W. [Clinic of the Goethe University, Department of Diagnostic and Interventional Radiology, Frankfurt (Germany); Klinikum der Goethe-Universitaet, Institut fuer Diagnostische und Interventionelle Radiologie, Frankfurt am Main (Germany)

2014-07-15

To investigate the impact of automated attenuation-based tube potential selection on image quality and exposure parameters in polytrauma patients undergoing contrast-enhanced thoraco-abdominal CT. One hundred patients were examined on a 16-slice device at 120 kV with 190 ref.mAs and automated mA modulation only. Another 100 patients underwent 128-slice CT with automated mA modulation and topogram-based automated tube potential selection (autokV) at 100, 120 or 140 kV. Volume CT dose index (CTDI{sub vol}), dose-length product (DLP), body diameters, noise, signal-to-noise ratio (SNR) and subjective image quality were compared. In the autokV group, 100 kV was automatically selected in 82 patients, 120 kV in 12 patients and 140 kV in 6 patients. Patient diameters increased with higher kV settings. The median CTDI{sub vol} (8.3 vs. 12.4 mGy; -33 %) and DLP (594 vs. 909 mGy cm; -35 %) in the entire autokV group were significantly lower than in the group with fixed 120 kV (p < 0.05 for both). Image quality remained at a constantly high level at any selected kV level. Topogram-based automated selection of the tube potential allows for significant dose savings in thoraco-abdominal trauma CT while image quality remains at a constantly high level. (orig.)

Potential of vetiver (vetiveria zizanioides l.) grass in removing selected pahs from diesel contaminated soil

International Nuclear Information System (INIS)

Nisa, W.U.; Rashid, A.

2015-01-01

Phytoremediation has been renowned as an encouraging technology for the remediation of polycyclic aromatic hydrocarbon (PAH)-contaminated soils, little is known about how plant species behave during the process of PAH phytoremediation. Therefore, the aim of this study was to investigate the effectiveness of vetiver (Vetiveria zizanioides L.) plant in PAH phytoremediation and extraction potential of Vetiveria zizanioides for selected PAHs from the diesel contaminated soil. The field soil samples were spiked with varying concentrations (0.5% and 1%) of diesel and used for pot experiment which was conducted in greenhouse. Vetiver grass was used as experimental plant. Physico-chemical analysis of soil was performed before and after the experiment. Concentration of selected PAHs i.e. phenanthrene, pyrene and benzo(a)pyrene in soil was determined using HPLC. Plant parameters such as root/shoot length and dry mass were compared after harvest. Concentrations of PAHs were also determined in plant material and in soils after harvesting. Result showed that initial concentration of phenanthrene was significantly different from final concentration in treatments in which soil was spiked with diesel. Initial and final concentration of pyrene in soil was also significantly different from each other in two treatments in which soil was spiked with 1% diesel. Pyrene concentration was significantly different in roots and shoots of plants while benzo(a)pyrene concentration in treatments in which soil was spiked with diesel was also significantly different from roots and shoots. Phenanthrene was less extracted by the plant in all the treatments and it was present in higher concentration in soil as compared to plant. Our results indicate that vetiver grass has effectively removed PAHs from soil consequently a significantly higher root and shoot uptake of PAHs was observed than control treatments. Study concludes Vetiveria zizanioides as potentially promising plant specie for the removal

Skin friction related behaviour of artificial turf systems.

Science.gov (United States)

Tay, Sock Peng; Fleming, Paul; Hu, Xiao; Forrester, Steph

2017-08-01

The occurrence of skin friction related injuries is an issue for artificial turf sports pitches and remains a barrier to their acceptance. The purpose of this study was to evaluate the current industry standard Securisport® Sports Surface Tester that measures skin surface related frictional behaviour of artificial turf. Little research has been published about the device and its efficacy, despite its widespread use as a standard FIFA test instrument. To achieve a range of frictional behaviours, several "third generation" (3G) carpet and infill combinations were investigated; friction time profiles throughout the Securisport rotations were assessed in combination with independent measurements of skin roughness before and after friction testing via 3D surface scanning. The results indicated that carpets without infill had greatest friction (coefficients of friction 0.97-1.20) while those completely filled with sand or rubber had similar and lower values independent of carpet type (coefficient of friction (COF) ≈0.57). Surface roughness of a silicone skin (s-skin) decreased after friction testing, with the largest change on sand infilled surfaces, indicating an "abrasive" polishing effect. The combined data show that the s-skin is damaged in a surface-specific manner, thus the Securisport COF values appear to be a poor measure of the potential for skin abrasion. It is proposed that the change in s-skin roughness improves assessment of the potential for skin damage when players slide on artificial turf.

Regulation and regulatory role of WNT signaling in potentiating FSH action during bovine dominant follicle selection.

Directory of Open Access Journals (Sweden)

P S P Gupta

Full Text Available Follicular development occurs in wave like patterns in monotocous species such as cattle and humans and is regulated by a complex interaction of gonadotropins with local intrafollicular regulatory molecules. To further elucidate potential mechanisms controlling dominant follicle selection, granulosa cell RNA harvested from F1 (largest and F2 (second largest follicles isolated at predeviation (PD and onset of diameter deviation (OD stages of the first follicular wave was subjected to preliminary RNA transcriptome analysis. Expression of numerous WNT system components was observed. Hence experiments were performed to test the hypothesis that WNT signaling modulates FSH action on granulosa cells during follicular waves. Abundance of mRNA for WNT pathway members was evaluated in granulosa cells harvested from follicles at emergence (EM, PD, OD and early dominance (ED stages of the first follicular wave. In F1 follicles, abundance of CTNNB1 and DVL1 mRNAs was higher and AXIN2 mRNA was lower at ED versus EM stages and DVL1 and FZD6 mRNAs were higher and AXIN2 mRNA was lower in F1 versus F2 follicle at the ED stage. Bovine granulosa cells were treated in vitro with increasing doses of the WNT inhibitor IWR-1+/- maximal stimulatory dose of FSH. IWR-1 treatment blocked the FSH-induced increase in granulosa cell numbers and reduced the FSH-induced increase in estradiol. Granulosa cells were also cultured in the presence or absence of FSH +/- IWR-1 and hormonal regulation of mRNA for WNT pathway members and known FSH targets determined. FSH treatment increased CYP19A1, CCND2, CTNNB1, AXIN2 and FZD6 mRNAs and the stimulatory effect on CYP19A1 mRNA was reduced by IWR-1. In contrast, FSH reduced CARTPT mRNA and IWR-1 partially reversed the inhibitory effect of FSH. Results support temporal and hormonal regulation and a potential role for WNT signaling in potentiating FSH action during dominant follicle selection.

A potential food-grade cloning vector for Streptococcus thermophilus that uses cadmium resistance as the selectable marker.

Science.gov (United States)

Wong, Wing Yee; Su, Ping; Allison, Gwen E; Liu, Chun-Qiang; Dunn, Noel W

2003-10-01

A potential food-grade cloning vector, pND919, was constructed and transformed into S. thermophilus ST3-1, a plasmid-free strain. The vector contains DNAs from two different food-approved organisms, Streptococcus thermophilus and Lactococcus lactis. The 5.0-kb pND919 is a derivative of the cloning vector pND918 (9.3 kb) and was constructed by deletion of the 4.3-kb region of pND918 which contained DNA from non-food-approved organisms. pND919 carries a heterologous native cadmium resistance selectable marker from L. lactis M71 and expresses the Cd(r) phenotype in S. thermophilus transformants. With the S. thermophilus replicon derived from the shuttle vector pND913, pND919 is able to replicate in the two S. thermophilus industrial strains tested, ST3-1 and ST4-1. Its relatively high retention rate in S. thermophilus further indicates its usefulness as a potential food-grade cloning vector. To our knowledge, this is the first report of a replicative potential food-grade vector for the industrially important organism S. thermophilus.

Different underlying mechanisms for face emotion and gender processing during feature-selective attention: Evidence from event-related potential studies.

Science.gov (United States)

Wang, Hailing; Ip, Chengteng; Fu, Shimin; Sun, Pei

2017-05-01

Face recognition theories suggest that our brains process invariant (e.g., gender) and changeable (e.g., emotion) facial dimensions separately. To investigate whether these two dimensions are processed in different time courses, we analyzed the selection negativity (SN, an event-related potential component reflecting attentional modulation) elicited by face gender and emotion during a feature selective attention task. Participants were instructed to attend to a combination of face emotion and gender attributes in Experiment 1 (bi-dimensional task) and to either face emotion or gender in Experiment 2 (uni-dimensional task). The results revealed that face emotion did not elicit a substantial SN, whereas face gender consistently generated a substantial SN in both experiments. These results suggest that face gender is more sensitive to feature-selective attention and that face emotion is encoded relatively automatically on SN, implying the existence of different underlying processing mechanisms for invariant and changeable facial dimensions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Auditory attention in childhood and adolescence: An event-related potential study of spatial selective attention to one of two simultaneous stories

Science.gov (United States)

Karns, Christina M.; Isbell, Elif; Giuliano, Ryan J.; Neville, Helen J.

2015-01-01

Auditory selective attention is a critical skill for goal-directed behavior, especially where noisy distractions may impede focusing attention. To better understand the developmental trajectory of auditory spatial selective attention in an acoustically complex environment, in the current study we measured auditory event-related potentials (ERPs) in human children across five age groups: 3–5 years; 10 years; 13 years; 16 years; and young adults using a naturalistic dichotic listening paradigm, characterizing the ERP morphology for nonlinguistic and linguistic auditory probes embedded in attended and unattended stories. We documented robust maturational changes in auditory evoked potentials that were specific to the types of probes. Furthermore, we found a remarkable interplay between age and attention-modulation of auditory evoked potentials in terms of morphology and latency from the early years of childhood through young adulthood. The results are consistent with the view that attention can operate across age groups by modulating the amplitude of maturing auditory early-latency evoked potentials or by invoking later endogenous attention processes. Development of these processes is not uniform for probes with different acoustic properties within our acoustically dense speech-based dichotic listening task. In light of the developmental differences we demonstrate, researchers conducting future attention studies of children and adolescents should be wary of combining analyses across diverse ages. PMID:26002721

Auditory attention in childhood and adolescence: An event-related potential study of spatial selective attention to one of two simultaneous stories.

Science.gov (United States)

Karns, Christina M; Isbell, Elif; Giuliano, Ryan J; Neville, Helen J

2015-06-01

Auditory selective attention is a critical skill for goal-directed behavior, especially where noisy distractions may impede focusing attention. To better understand the developmental trajectory of auditory spatial selective attention in an acoustically complex environment, in the current study we measured auditory event-related potentials (ERPs) across five age groups: 3-5 years; 10 years; 13 years; 16 years; and young adults. Using a naturalistic dichotic listening paradigm, we characterized the ERP morphology for nonlinguistic and linguistic auditory probes embedded in attended and unattended stories. We documented robust maturational changes in auditory evoked potentials that were specific to the types of probes. Furthermore, we found a remarkable interplay between age and attention-modulation of auditory evoked potentials in terms of morphology and latency from the early years of childhood through young adulthood. The results are consistent with the view that attention can operate across age groups by modulating the amplitude of maturing auditory early-latency evoked potentials or by invoking later endogenous attention processes. Development of these processes is not uniform for probes with different acoustic properties within our acoustically dense speech-based dichotic listening task. In light of the developmental differences we demonstrate, researchers conducting future attention studies of children and adolescents should be wary of combining analyses across diverse ages. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Identification and in Vivo Evaluation of Liver X Receptor β-Selective Agonists for the Potential Treatment of Alzheimer’s Disease

Energy Technology Data Exchange (ETDEWEB)

Stachel, Shawn J.; Zerbinatti, Celina; Rudd, Michael T.; Cosden, Mali; Suon, Sokreine; Nanda, Kausik K.; Wessner, Keith; DiMuzio, Jillian; Maxwell, Jill; Wu, Zhenhua; Uslaner, Jason M.; Michener, Maria S.; Szczerba, Peter; Brnardic, Edward; Rada, Vanessa; Kim, Yuntae; Meissner, Robert; Wuelfing, Peter; Yuan, Yang; Ballard, Jeanine; Holahan, Marie; Klein, Daniel J.; Lu, Jun; Fradera, Xavier; Parthasarathy, Gopal; Uebele, Victor N.; Chen, Zhongguo; Li, Yingjie; Li, Jian; Cooke, Andrew J.; Bennett, D. Jonathan; Bilodeau, Mark T.; Renger, John (Merck); (WuXi App Tec)

2016-04-14

Herein, we describe the development of a functionally selective liver X receptor β (LXRβ) agonist series optimized for Emax selectivity, solubility, and physical properties to allow efficacy and safety studies in vivo. Compound 9 showed central pharmacodynamic effects in rodent models, evidenced by statistically significant increases in apolipoprotein E (apoE) and ATP-binding cassette transporter levels in the brain, along with a greatly improved peripheral lipid safety profile when compared to those of full dual agonists. These findings were replicated by subchronic dosing studies in non-human primates, where cerebrospinal fluid levels of apoE and amyloid-β peptides were increased concomitantly with an improved peripheral lipid profile relative to that of nonselective compounds. These results suggest that optimization of LXR agonists for Emax selectivity may have the potential to circumvent the adverse lipid-related effects of hepatic LXR activity.

Enabling area-selective potential-energy engineering in InGaN/GaN quantum wells by post-growth intermixing

KAUST Repository

Shen, Chao

2015-03-19

We report on a unique area-selective, post-growth approach in engineering the quantum-confined potential-energy profile of InGaN/GaN quantum wells (QWs) utilizing metal/dielectric-coating induced intermixing process. This led to simultaneous realization of adjacent regions with peak emission of 2.74 eV and 2.82 eV with a high spatial resolution (~1 μm) at the coating boundary. The potential profile softening in the intermixed QW light-emitting diode (LED) was experimentally and numerically correlated, shedding light on the origin of alleviated efficiency droop from 30.5% to 16.6% (at 150 A/cm2). The technique is advantageous for fabricating high efficiency light-emitters, and is amenable to monolithic integration of nitride-based photonic devices.

Enabling area-selective potential-energy engineering in InGaN/GaN quantum wells by post-growth intermixing

KAUST Repository

Shen, Chao; Ng, Tien Khee; Ooi, Boon S.

2015-01-01

We report on a unique area-selective, post-growth approach in engineering the quantum-confined potential-energy profile of InGaN/GaN quantum wells (QWs) utilizing metal/dielectric-coating induced intermixing process. This led to simultaneous realization of adjacent regions with peak emission of 2.74 eV and 2.82 eV with a high spatial resolution (~1 μm) at the coating boundary. The potential profile softening in the intermixed QW light-emitting diode (LED) was experimentally and numerically correlated, shedding light on the origin of alleviated efficiency droop from 30.5% to 16.6% (at 150 A/cm2). The technique is advantageous for fabricating high efficiency light-emitters, and is amenable to monolithic integration of nitride-based photonic devices.

Studi Eksperimental tentang Pengaruh Dinding Bata Merah Terhadap Ketahanan Lateral Struktur Beton Bertulang

Directory of Open Access Journals (Sweden)

Jafril Tanjung

2016-08-01

Full Text Available Reinforced-Concrete (R/C frame structures with unreinforced clay brick masonry (URM infill walls are commonly used in developing countries with regions of high seismicity. The walls are usually treated as non-structural components, and their interaction with the bounding frames is often ignored in designing process. Field evidences after West Sumatera earthquake have shown that URM infill walls can help reduce the vulnerability of the R/C frame structures against lateral load. In the present paper, it is an attempt to highlight the series laboratory experimental results of the R/C frame structures with URM infill walls. Results of the experimental studies which have indicated URM infill walls can have a significant influence on the lateral resistance of the R/C frame structures. Increasing the lateral resistance is also observed on the R/C frame structures uses larger size of the clay brick masonry and uses mortar on the infill walls’ surfaces.

Modeling the influence of the BRDF characteristics of vegetation on the retrieval of solar-induced chlorophyll fluorescence under different illumination conditions

Science.gov (United States)

Liu, Xinjie; Liu, Liangyun

2017-04-01

The Fraunhofer Line Discrimination (FLD) principle is the main approach used for the retrieval of solar-induced chlorophyll fluorescence (SIF). The basic assumption of the FLD principle is that the apparent reflectance spectra without SIF in-filling are smooth in the region of the absorption bands. However, in fact, this assumption is not valid due to the so-called "direct radiation in-filling" effect caused by the non-linear contribution of direct and diffuse radiation at the oxygen absorption bands, which are widely used for ground-based SIF retrieval. In this study, we first analyzed the physical mechanism of the direct radiation in-filling effect on the oxygen absorption bands and found that the bias in the SIF retrieval caused by the direct radiation in-filling effect at the O2-A band was less than 20% based on the use of a simulated dataset. Secondly, we established a simple correction model of the direct radiation in-filling effect. We found that the direct radiation in-filling effect at the O2-A band was directly proportional to the difference between the reflectance of the direct and diffuse radiation, and that the coefficient of proportionality was well correlated with the diffuse-to-global radiation ratio in the form of a quadratic function. The coefficient of determination (R-squared) for this correlation was 0.97. Finally, the model was validated using both simulated and field datasets. The validation results show that the bias in the SIF retrieval caused by the direct radiation in-filling effect can be efficiently corrected using the model proposed in this paper. This study thus provides a possible approach to estimating and correcting for the direct radiation-infilling effect using prior knowledge of the BRDF characteristics of direct and diffuse radiation for specific targets.

[Effects of anxiety and the COMT gene on cortical evoked potentials and performance effectiveness of selective attention].

Science.gov (United States)

Alfimova, M V; Golimbet, V E; Lebedeva, I S; Korovaĭtseva, G I; Lezheĭko, T V

2014-01-01

We studied influence of the anxiety-related trait Harm Avoidance and the COMT gene, which is an important modulator of prefrontal functioning, on event-related potentials in oddball paradigm and performance effectiveness of selective attention. For 50 individuals accuracy and time of searching words among letters at any desired rate and then under an instruction to perform the task as quickly and accurate as possible were measured. Scores on the Harm Avoidance scale from Cloninger's Temperament and Character Inventory, N100 and P300 parameters, and COMTVa1158Met genotypes were obtained for them as well. Searching accuracy and time were mainly related to N100 amplitude. The COMT genotype and Harm Avoidance did not affect N100 amplitude; however, the N100 amplitude modulated their effects on accuracy and time dynamics. Harm Avoidance was positively correlated with P300 latency. The results suggest that anxiety and the COMT gene effects on performance effectiveness of selective attention depend on cognitive processes reflected in N100 parameters.

Structural differences of matrix metalloproteinases with potential implications for inhibitor selectivity examined by the GRID/CPCA approach

DEFF Research Database (Denmark)

Terp, Gitte Elgaard; Cruciani, Gabriele; Christensen, Inge Thøger

2002-01-01

The matrix metalloproteinases (MMPs) are a family of proteolytic enzymes, which have been the focus of a lot of research in recent years because of their involvement in various disease conditions. In this study, structures of 10 enzymes (MMP1, MMP2, MMP3, MMP7, MMP8, MMP9, MMP12, MMP13, MMP14......, and MMP20) were examined with the intention of highlighting regions that could be potential sites for obtaining selectivity. For this purpose, the GRID/CPCA approach as implemented in GOLPE was used. Counterions were included to take into account the different electrostatic properties of the proteins......, and the GRID calculations were performed, allowing the protein side chains to move in response to interaction with the probes. In the search for selectivity, the MMPs are known to be a very difficult case because the enzymes of this family are very similar. The well-known differences in the S1' pocket were...

Transport and selective chaining of bidisperse particles in a travelling wave potential.

Science.gov (United States)

Tierno, Pietro; Straube, Arthur V

2016-05-01

We combine experiments, theory and numerical simulation to investigate the dynamics of a binary suspension of paramagnetic colloidal particles dispersed in water and transported above a stripe-patterned magnetic garnet film. The substrate generates a one-dimensional periodic energy landscape above its surface. The application of an elliptically polarized rotating magnetic field causes the landscape to translate, inducing direct transport of paramagnetic particles placed above the film. The ellipticity of the applied field can be used to control and tune the interparticle interactions, from net repulsive to net attractive. When considering particles of two distinct sizes, we find that, depending on their elevation above the surface of the magnetic substrate, the particles feel effectively different potentials, resulting in different mobilities. We exploit this feature to induce selective chaining for certain values of the applied field parameters. In particular, when driving two types of particles, we force only one type to condense into travelling parallel chains. These chains confine the movement of the other non-chaining particles within narrow colloidal channels. This phenomenon is explained by considering the balance of pairwise magnetic forces between the particles and their individual coupling with the travelling landscape.

Nutritional Potential of Selected Insect Species Reared on the Island of Sumatra.

Science.gov (United States)

Adámková, Anna; Mlček, Jiří; Kouřimská, Lenka; Borkovcová, Marie; Bušina, Tomáš; Adámek, Martin; Bednářová, Martina; Krajsa, Jan

2017-05-12

Inhabitants of the Indonesian island of Sumatra are faced with the problem of insufficient food supplies and the consequent risk of undernourishment and health issues. Edible insects as a traditional and readily available food source could be part of the solution. The nutritional value of insects depends on many factors, e.g., species, developmental stage, sex, diet, and climatic conditions. However, edible insects bred in Sumatra for human consumption have never before been assessed with regard to their nutritional value. Our study involved analyses of crude protein, chitin, fat and selected fatty acid contents of giant mealworm larvae ( Zophobas morio ), larvae of the common mealworm ( Tenebrio molitor) and nymphs of the field cricket ( Gryllus assimilis ). Crude protein content in the samples ranged from 46% to 56%. Highest (35%) and lowest (31%) amounts of fat were recorded in giant mealworm larvae and larvae of the common mealworm, respectively. Chitin amounts ranged from 6% to 13%. Based on these values, which are comparable to those known from other food insects reared in different regions of the world, the edible species bred in Sumatra could become food sources with a potential to help stave off hunger and undernourishment.

Diffusion and Perfusion MR Imaging in Acute Stroke: Clinical Utility and Potential Limitations for Treatment Selection

DEFF Research Database (Denmark)

Bateman, Mathew; Slater, Lee-Anne; Leslie-Mazwi, Thabele M

2017-01-01

Magnetic resonance (MR) diffusion-weighted imaging (DWI) and perfusion-weighted imaging (PWI) offer unique insight into acute ischemic stroke pathophysiology. These techniques may offer the ability to apply pathophysiology to accurately individualize acute stroke reperfusion treatment, including ...... to be investigated in ongoing randomized controlled trials, and continued research into these techniques will help achieve the goal of tissue-based decision making and individualized acute stroke treatment....... extending the opportunity of reperfusion treatment to well beyond the current time-based treatment windows. This review examines the use of DWI and PWI in the major stroke trials, their current clinical utility, and potential limitations for reperfusion treatment selection. DWI and PWI continue...

Improvement of selected strains through gamma irradiation for enhanced lipolytic potential

International Nuclear Information System (INIS)

Iftikhar, T.; Mubashir, N.; Hussain, Y.; Abbas, S.Q.; Ashraf, I.

2010-01-01

The purpose of the present investigation was to enhance the production of industrially important enzyme lipase by subjecting the wild lipase producing fungal strains i.e. Aspergillus niger, Rhizopus microsporus and Penicillium atrovenetum to various doses of gamma irradiation (20, 40, 60, 80, 100, 120, 140 and 160 Gy). The isolation and lipolytic activity of selected mutant derived strains is described in this paper. Among all the mutants tested, MBL-5 obtained at 140Gy of Aspergillus niger strain showed highest extracellular lipase activity (13.75 +- 0.15 U mL/sup -1/) while MBL-1 Rhizopus microsporus at the rate 20Gy showed the lowest activity i.e., 1.06 +- 0.11 U mL/sup -1/. A range of pH 3, 5, 7, 9 and 11 was used to check the lipolytic potential of various mutants along with their wild type. It was observed that MBL-5 (Aspergillus niger) and MBL-2 (Rhizopus microsporus) showed enhanced extracellular lipase activity at pH 11 while MBL-3 (Penicillium atrovenetum) showed the highest extracellular lipase activity 22.53 +- 0.21 U mL/sup -1/ at pH 9. It indicates a possible role for the MBL-2, MBL-3 and MBL-5 mutant strains in the detergent industry for the development of eco-friendly technologies. (author)

Screening of CHP Potential at Federal Sites in Select Regions of the U.S.

Energy Technology Data Exchange (ETDEWEB)

Energy Nexus Group, . .

2002-02-25

Combined Cooling Heat and Power (CHP) is a master term for onsite power generation technologies that sequentially produce electrical or mechanical energy and useful thermal energy. Some form of CHP has existed for more than 100 years and it is now achieving a greater level of acceptance due to an increasing need for reliable power service and energy cost management. Capturing and using the heat produced as a byproduct of generating electricity from fuel sources increases the usable energy that can be obtained from the original fuel source. CHP technologies have the potential to reduce energy consumption through increased efficiency--decreasing energy bills as well as pollution. The EPA recognizes CHP as a potent climate change mitigation measure. The U.S. Department of Energy (D.O.E.) Federal Energy Management Program (FEMP) is assisting Federal agencies to realize their energy efficiency goals. CHP is an efficiency measure that is receiving growing attention because of its sizable potential to provide efficiency, environmental, and reliability benefits. CHP therefore benefits the host facility, the electric infrastructure, and the U.S. society as a whole. This report and study seeks to make a preliminary inquiry into near term CHP opportunities for federal facilities in selected U.S. regions. It offers to help focus the attention of policy makers and energy facility managers on good candidate facilities for CHP. First, a ranked list of high potential individual sites is identified. Then, several classes of federal facilities are identified for the multiple opportunities they offer as a class. Recommendations are then offered for appropriate next steps for the evaluation and cost effective implementation of CHP. This study was designed to ultimately rank federal facilities in terms of their potential to take advantage of CHP economic and external savings in the near term. In order to best serve the purposes of this study, projections have been expressed in terms of

Selective scattering in a zigzag graphene nanoribbon

International Nuclear Information System (INIS)

Nakabayashi, Jun; Kurihara, Susumu

2009-01-01

Electric transport of a zigzag graphene nanoribbon through a step-like potential or a potential barrier is studied by using the recursive Green's function method. The results for a step-like potential show that scattering processes in a zigzag graphene nanoribbon obey a following selection rule: when the number of zigzag chains N is even, electrons in the band m are only scattered into the bands m+2n, where n is an integer. According to this selection rule, a step-like potential blocks the current when the potential height exceeds the incident energy as long as only the low-energy region is treated. Then, replacing a step-like potential with a potential barrier, we also show that it can play the role of a b and-selective filter .

The influences of the AMO and NAO on the sedimentary infill in an Azores Archipelago lake since ca. 1350 CE

Science.gov (United States)

Hernández, Armand; Sáez, Alberto; Bao, Roberto; Raposeiro, Pedro M.; Trigo, Ricardo M.; Doolittle, Sara; Masqué, Pere; Rull, Valentí; Gonçalves, Vítor; Vázquez-Loureiro, David; Rubio-Inglés, María J.; Sánchez-López, Guiomar; Giralt, Santiago

2017-07-01

The location of the Azores Archipelago in the North Atlantic makes this group of islands an excellent setting to study the long-term behavior of large oceanic and atmospheric climate dynamic patterns, such as the Atlantic Multidecadal Oscillation (AMO) and the North Atlantic Oscillation (NAO). Here, we present the impacts of these patterns on Lake Empadadas (Azores Archipelago) from the Medieval Climate Anomaly (MCA) - Little Ice Age (LIA) transition to the present based on sedimentological, geochemical and biological characterizations of the sedimentary record. Multivariate analyses of a number of proxies including X-ray fluorescence (XRF), X-ray diffraction (XRD), total organic and inorganic carbon (TOC and TIC) and diatom life forms abundance reveal that the sedimentary infill evolution has been controlled by (i) fluctuations in the lake level and (ii) variations in organic matter accumulation. Both processes are governed by climate variability and modulated by anthropogenic activities associated with changes on the lake catchment. Changes in these two sedimentary processes have been used to infer five stages: (i) the MCA-LIA transition (ca. 1350-1450 CE) was characterized by a predominantly positive AMO phase, which led to intermediate lake levels and high organic matter concentration; (ii) the first half of the LIA (ca. 1450-1600 CE) was characterized by predominant lowstand conditions and intermediate organic matter deposition mainly related to negative AMO phases; (iii) the second half of the LIA (ca. 1600-1850 CE) was characterized by negative AMO and NAO phases, implying intermediate lake levels and high organic matter deposition; (iv) the Industrial era (ca. 1850-1980 CE) was characterized by the lowest lake level and organic matter accumulation associated with negative AMO phases; and (v) the period spanning between 1980 CE and the present reveals the highest lake levels and low organic matter deposition, being associated with very positive AMO

Mining potential biomarkers associated with space flight in Caenorhabditis elegans experienced Shenzhou-8 mission with multiple feature selection techniques

International Nuclear Information System (INIS)

Zhao, Lei; Gao, Ying; Mi, Dong; Sun, Yeqing

2016-01-01

Highlights: • A combined algorithm is proposed to mine biomarkers of spaceflight in C. elegans. • This algorithm makes the feature selection more reliable and robust. • Apply this algorithm to predict 17 positive biomarkers to space environment stress. • The strategy can be used as a general method to select important features. - Abstract: To identify the potential biomarkers associated with space flight, a combined algorithm, which integrates the feature selection techniques, was used to deal with the microarray datasets of Caenorhabditis elegans obtained in the Shenzhou-8 mission. Compared with the ground control treatment, a total of 86 differentially expressed (DE) genes in responses to space synthetic environment or space radiation environment were identified by two filter methods. And then the top 30 ranking genes were selected by the random forest algorithm. Gene Ontology annotation and functional enrichment analyses showed that these genes were mainly associated with metabolism process. Furthermore, clustering analysis showed that 17 genes among these are positive, including 9 for space synthetic environment and 8 for space radiation environment only. These genes could be used as the biomarkers to reflect the space environment stresses. In addition, we also found that microgravity is the main stress factor to change the expression patterns of biomarkers for the short-duration spaceflight.

Mining potential biomarkers associated with space flight in Caenorhabditis elegans experienced Shenzhou-8 mission with multiple feature selection techniques

Energy Technology Data Exchange (ETDEWEB)

Zhao, Lei [Institute of Environmental Systems Biology, College of Environmental Science and Engineering, Dalian Maritime University, Dalian 116026 (China); Gao, Ying [Center of Medical Physics and Technology, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Shushanhu Road 350, Hefei 230031 (China); Mi, Dong, E-mail: mid@dlmu.edu.cn [Department of Physics, Dalian Maritime University, Dalian 116026 (China); Sun, Yeqing, E-mail: yqsun@dlmu.edu.cn [Institute of Environmental Systems Biology, College of Environmental Science and Engineering, Dalian Maritime University, Dalian 116026 (China)

2016-09-15

Highlights: • A combined algorithm is proposed to mine biomarkers of spaceflight in C. elegans. • This algorithm makes the feature selection more reliable and robust. • Apply this algorithm to predict 17 positive biomarkers to space environment stress. • The strategy can be used as a general method to select important features. - Abstract: To identify the potential biomarkers associated with space flight, a combined algorithm, which integrates the feature selection techniques, was used to deal with the microarray datasets of Caenorhabditis elegans obtained in the Shenzhou-8 mission. Compared with the ground control treatment, a total of 86 differentially expressed (DE) genes in responses to space synthetic environment or space radiation environment were identified by two filter methods. And then the top 30 ranking genes were selected by the random forest algorithm. Gene Ontology annotation and functional enrichment analyses showed that these genes were mainly associated with metabolism process. Furthermore, clustering analysis showed that 17 genes among these are positive, including 9 for space synthetic environment and 8 for space radiation environment only. These genes could be used as the biomarkers to reflect the space environment stresses. In addition, we also found that microgravity is the main stress factor to change the expression patterns of biomarkers for the short-duration spaceflight.

Selected constants oxydo-reduction potentials tables of constants and numerical data affiliated to the International Union of Pure and Applied Chemistry, v.8

CERN Document Server

Charlot, G

1958-01-01

Selected Constants: Oxydo-Reduction Potentials contains Tables of the most probable value of the normal oxidation-reduction potential, or of the formal or apparent potential, of a given oxidation-reduction system. This book is prepared under the sponsorship of the Commission on Electrochemical Data of the Section of Analytical Chemistry of the International Union of Pure and Applied Chemistry. It is included in a general program of the Section of Analytical Chemistry. Entry items are classified in alphabetical order. This book will be of value to specialized and non-specialized chemists, teach

Selection of candidate container materials for the conceptual waste package design for a potential high level nuclear waste repository at Yucca Mountain

Energy Technology Data Exchange (ETDEWEB)

Van Konynenburg, R.A.; Halsey, W.G.; McCright, R.D.; Clarke, W.L. Jr. [Lawrence Livermore National Lab., CA (United States); Gdowski, G.E. [KMI, Inc., Albuquerque, NM (United States)

1993-02-01

Preliminary selection criteria have been developed, peer-reviewed, and applied to a field of 41 candidate materials to choose three alloys for further consideration during the advanced conceptual design phase of waste package development for a potential high level nuclear waste repository at Yucca Mountain, Nevada. These three alloys are titanium grade 12, Alloy C-4, and Alloy 825. These selections are specific to the particular conceptual design outlined in the Site Characterization Plan. Other design concepts that may be considered in the advanced conceptual design phase may favor other materials choices.

Selection of candidate container materials for the conceptual waste package design for a potential high level nuclear waste repository at Yucca Mountain

International Nuclear Information System (INIS)

Van Konynenburg, R.A.; Halsey, W.G.; McCright, R.D.; Clarke, W.L. Jr.; Gdowski, G.E.

1993-02-01

Preliminary selection criteria have been developed, peer-reviewed, and applied to a field of 41 candidate materials to choose three alloys for further consideration during the advanced conceptual design phase of waste package development for a potential high level nuclear waste repository at Yucca Mountain, Nevada. These three alloys are titanium grade 12, Alloy C-4, and Alloy 825. These selections are specific to the particular conceptual design outlined in the Site Characterization Plan. Other design concepts that may be considered in the advanced conceptual design phase may favor other materials choices

Sediment sources in a small agricultural catchment: A composite fingerprinting approach based on the selection of potential sources

Science.gov (United States)

Zhou, Huiping; Chang, Weina; Zhang, Longjiang

2016-08-01

Fingerprinting techniques have been widely used as a reasonable and reliable means for investigating sediment sources, especially in relatively large catchments in which there are significant differences in surface materials. However, the discrimination power of fingerprint properties for small catchments, in which the surface materials are relatively homogeneous and human interference is marked, may be affected by fragmentary or confused source information. Using fingerprinting techniques can be difficult, and there is still a need for further studies to verify the effectiveness of such techniques in these small catchments. A composite fingerprinting approach was used in this study to investigate the main sources of sediment output, as well as their relative contributions, from a small catchment (30 km2) with high levels of farming and mining activities. The impact of the selection of different potential sediment sources on the derivation of composite fingerprints and its discrimination power were also investigated by comparing the results from different combinations of potential source types. The initial source types and several samples that could cause confusion were adjusted. These adjustments improved the discrimination power of the composite fingerprints. The results showed that the composite fingerprinting approach used in this study had a discriminatory efficiency of 89.2% for different sediment sources and that the model had a mean goodness of fit of 0.90. Cultivated lands were the main sediment source. The sediment contribution of the studied cultivated lands ranged from 39.9% to 87.8%, with a mean of 76.6%, for multiple deposited sediment samples. The mean contribution of woodlands was 21.7%. Overall, the sediment contribution from mining and road areas was relatively low. The selection of potential sources is an important factor in the application of fingerprinting techniques and warrants more attention in future studies, as is the case with other

Newly-formed emotional memories guide selective attention processes: Evidence from event-related potentials.

Science.gov (United States)

Schupp, Harald T; Kirmse, Ursula; Schmälzle, Ralf; Flaisch, Tobias; Renner, Britta

2016-06-20

Emotional cues can guide selective attention processes. However, emotional stimuli can both activate long-term memory representations reflecting general world knowledge and engage newly formed memory representations representing specific knowledge from the immediate past. Here, the self-completion feature of associative memory was utilized to assess the regulation of attention processes by newly-formed emotional memory. First, new memory representations were formed by presenting pictures depicting a person either in an erotic pose or as a portrait. Afterwards, to activate newly-built memory traces, edited pictures were presented showing only the head region of the person. ERP recordings revealed the emotional regulation of attention by newly-formed memories. Specifically, edited pictures from the erotic compared to the portrait category elicited an early posterior negativity and late positive potential, similar to the findings observed for the original pictures. A control condition showed that the effect was dependent on newly-formed memory traces. Given the large number of new memories formed each day, they presumably make an important contribution to the regulation of attention in everyday life.

Newly-formed emotional memories guide selective attention processes: Evidence from event-related potentials

Science.gov (United States)

Schupp, Harald T.; Kirmse, Ursula; Schmälzle, Ralf; Flaisch, Tobias; Renner, Britta

2016-01-01

Emotional cues can guide selective attention processes. However, emotional stimuli can both activate long-term memory representations reflecting general world knowledge and engage newly formed memory representations representing specific knowledge from the immediate past. Here, the self-completion feature of associative memory was utilized to assess the regulation of attention processes by newly-formed emotional memory. First, new memory representations were formed by presenting pictures depicting a person either in an erotic pose or as a portrait. Afterwards, to activate newly-built memory traces, edited pictures were presented showing only the head region of the person. ERP recordings revealed the emotional regulation of attention by newly-formed memories. Specifically, edited pictures from the erotic compared to the portrait category elicited an early posterior negativity and late positive potential, similar to the findings observed for the original pictures. A control condition showed that the effect was dependent on newly-formed memory traces. Given the large number of new memories formed each day, they presumably make an important contribution to the regulation of attention in everyday life. PMID:27321471

Therapeutic potential of functional selectivity in the treatment of heart failure

DEFF Research Database (Denmark)

Christensen, Gitte Lund; Aplin, Mark; Hansen, Jakob Lerche

2010-01-01

Adrenergic and angiotensin receptors are prominent targets in pharmacological alleviation of cardiac remodeling and heart failure, but their use is associated with cardiodepressant side effects. Recent advances in our understanding of seven transmembrane receptor signaling show that it is possible...... to design ligands with "functional selectivity," acting as agonists on certain signaling pathways while antagonizing others. This represents a major pharmaceutical opportunity to separate desired from adverse effects governed by the same receptor. Accordingly, functionally selective ligands are currently...

Selective attention and the auditory vertex potential. 2: Effects of signal intensity and masking noise

Science.gov (United States)

Schwent, V. L.; Hillyard, S. A.; Galambos, R.

1975-01-01

A randomized sequence of tone bursts was delivered to subjects at short inter-stimulus intervals with the tones originating from one of three spatially and frequency specific channels. The subject's task was to count the tones in one of the three channels at a time, ignoring the other two, and press a button after each tenth tone. In different conditions, tones were given at high and low intensities and with or without a background white noise to mask the tones. The N sub 1 component of the auditory vertex potential was found to be larger in response to attended channel tones in relation to unattended tones. This selective enhancement of N sub 1 was minimal for loud tones presented without noise and increased markedly for the lower tone intensity and in noise added conditions.

Economic potential analysis of cogeneration using natural gas in the selected sectors; Analise do potencial economico de cogeracao a gas natural nos setores selecionados

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

This chapter presents the results of the economic potential of the natural gas cogeneration under topping regime, in the selected sectors of beverage industry, editorial and graphic industries, shopping centers, hospitals and hotels.

Atrial-selective K+ channel blockers: potential antiarrhythmic drugs in atrial fibrillation?

Science.gov (United States)

Ravens, Ursula

2017-11-01

In the wake of demographic change in Western countries, atrial fibrillation has reached an epidemiological scale, yet current strategies for drug treatment of the arrhythmia lack sufficient efficacy and safety. In search of novel medications, atrial-selective drugs that specifically target atrial over other cardiac functions have been developed. Here, I will address drugs acting on potassium (K + ) channels that are either predominantly expressed in atria or possess electrophysiological properties distinct in atria from ventricles. These channels include the ultra-rapidly activating, delayed outward-rectifying Kv1.5 channel conducting I Kur , the acetylcholine-activated inward-rectifying Kir3.1/Kir3.4 channel conducting I K,ACh , the Ca 2+ -activated K + channels of small conductance (SK) conducting I SK , and the two-pore domain K + (K2P) channels (tandem of P domains, weak inward-rectifying K + channels (TWIK-1), TWIK-related acid-sensitive K + channels (TASK-1 and TASK-3)) that are responsible for voltage-independent background currents I TWIK-1 , I TASK-1 , and I TASK-3 . Direct drug effects on these channels are described and their putative value in treatment of atrial fibrillation is discussed. Although many potential drug targets have emerged in the process of unravelling details of the pathophysiological mechanisms responsible for atrial fibrillation, we do not know whether novel antiarrhythmic drugs will be more successful when modulating many targets or a single specific one. The answer to this riddle can only be solved in a clinical context.

SU-F-T-181: Proton Therapy Tissue-Equivalence of 3D Printed Materials

International Nuclear Information System (INIS)

Taylor, P; Craft, D; Followill, D; Howell, R

2016-01-01

Purpose: This work investigated the proton tissue-equivalence of various 3D printed materials. Methods: Three 3D printers were used to create 5 cm cubic phantoms made of different plastics with varying percentages of infill. White resin, polylactic acid (PLA), and NinjaFlex plastics were used. The infills ranged from 15% to 100%. Each phantom was scanned with a CT scanner to obtain the HU value. The relative linear stopping power (RLSP) was then determined using a multi-layer ion chamber in a 200 MeV proton beam. The RLSP was measured both parallel and perpendicular to the print direction for each material. Results: The HU values of the materials ranged from lung-equivalent (−820 HU σ160) when using a low infill, to soft-tissue-equivalent 159 (σ12). The RLSP of the materials depended on the orientation of the beam relative to the print direction. When the proton beam was parallel to the print direction, the RLSP was generally higher than the RLSP in the perpendicular orientation, by up to 45%. This difference was smaller (less than 6%) for the materials with 100% infill. For low infill cubes irradiated parallel to the print direction, the SOBP curve showed extreme degradation of the beam in the distal region. The materials with 15–25% infill had wide-ranging agreement with a clinical HU-RLSP conversion curve, with some measurements falling within 1% of the curve and others deviating up to 45%. The materials with 100% infill all fell within 7% of the curve. Conclusion: While some materials tested fall within 1% of a clinical HU-RLSP curve, caution should be taken when using 3D printed materials with proton therapy, as the orientation of the beam relative to the print direction can result in a large change in RLSP. Further investigation is needed to measure how the infill pattern affects the material RLSP. This work was supported by PHS grant CA180803.

SU-F-T-181: Proton Therapy Tissue-Equivalence of 3D Printed Materials

Energy Technology Data Exchange (ETDEWEB)

Taylor, P; Craft, D; Followill, D; Howell, R [UT MD Anderson Cancer Center, Houston, TX (United States)

2016-06-15

Purpose: This work investigated the proton tissue-equivalence of various 3D printed materials. Methods: Three 3D printers were used to create 5 cm cubic phantoms made of different plastics with varying percentages of infill. White resin, polylactic acid (PLA), and NinjaFlex plastics were used. The infills ranged from 15% to 100%. Each phantom was scanned with a CT scanner to obtain the HU value. The relative linear stopping power (RLSP) was then determined using a multi-layer ion chamber in a 200 MeV proton beam. The RLSP was measured both parallel and perpendicular to the print direction for each material. Results: The HU values of the materials ranged from lung-equivalent (−820 HU σ160) when using a low infill, to soft-tissue-equivalent 159 (σ12). The RLSP of the materials depended on the orientation of the beam relative to the print direction. When the proton beam was parallel to the print direction, the RLSP was generally higher than the RLSP in the perpendicular orientation, by up to 45%. This difference was smaller (less than 6%) for the materials with 100% infill. For low infill cubes irradiated parallel to the print direction, the SOBP curve showed extreme degradation of the beam in the distal region. The materials with 15–25% infill had wide-ranging agreement with a clinical HU-RLSP conversion curve, with some measurements falling within 1% of the curve and others deviating up to 45%. The materials with 100% infill all fell within 7% of the curve. Conclusion: While some materials tested fall within 1% of a clinical HU-RLSP curve, caution should be taken when using 3D printed materials with proton therapy, as the orientation of the beam relative to the print direction can result in a large change in RLSP. Further investigation is needed to measure how the infill pattern affects the material RLSP. This work was supported by PHS grant CA180803.

Selective attention to spatial and non-spatial visual stimuli is affected differentially by age: Effects on event-related brain potentials and performance data

NARCIS (Netherlands)

Talsma, D.; Kok, Albert; Ridderinkhof, K. Richard

2006-01-01

To assess selective attention processes in young and old adults, behavioral and event-related potential (ERP) measures were recorded. Streams of visual stimuli were presented from left or right locations (Experiment 1) or from a central location and comprising two different spatial frequencies

Band-selective filter in a zigzag graphene nanoribbon.

Science.gov (United States)

Nakabayashi, Jun; Yamamoto, Daisuke; Kurihara, Susumu

2009-02-13

Electric transport of a zigzag graphene nanoribbon through a steplike potential and a barrier potential is investigated by using the recursive Green's function method. In the case of the steplike potential, we demonstrate numerically that scattering processes obey a selection rule for the band indices when the number of zigzag chains is even; the electrons belonging to the "even" ("odd") bands are scattered only into the even (odd) bands so that the parity of the wave functions is preserved. In the case of the barrier potential, by tuning the barrier height to be an appropriate value, we show that it can work as the "band-selective filter", which transmits electrons selectively with respect to the indices of the bands to which the incident electrons belong. Finally, we suggest that this selection rule can be observed in the conductance by applying two barrier potentials.

Evaluation of Phenolic Content Variability along with Antioxidant, Antimicrobial, and Cytotoxic Potential of Selected Traditional Medicinal Plants from India.

Science.gov (United States)

Singh, Garima; Passsari, Ajit K; Leo, Vincent V; Mishra, Vineet K; Subbarayan, Sarathbabu; Singh, Bhim P; Kumar, Brijesh; Kumar, Sunil; Gupta, Vijai K; Lalhlenmawia, Hauzel; Nachimuthu, Senthil K

2016-01-01

Plants have been used since ancient times as an important source of biologically active substances. The aim of the present study was to investigate the phytochemical constituents (flavonoids and phenolics), antioxidant potential, cytotoxicity against HepG2 (human hepato carcinoma) cancer cell lines, and the antimicrobial activity of the methanol extract of selected traditional medicinal plants collected from Mizoram, India. A number of phenolic compounds were detected using HPLC-DAD-ESI-TOF-MS, mainly Luteolin, Kaempferol, Myricetin, Gallic Acid, Quercetin and Rutin, some of which have been described for the first time in the selected plants. The total phenolic and flavonoid contents showed high variation ranging from 4.44 to 181.91 μg of Gallic Acid equivalent per milligram DW (GAE/mg DW) and 3.17 to 102.2 μg of Quercetin/mg, respectively. The antioxidant capacity was determined by DPPH (IC50 values ranges from 34.22 to 131.4 μg/mL), ABTS (IC50 values ranges from 24.08 to 513.4 μg/mL), and reducing power assays. Antimicrobial activity was assayed against gram positive (Staphylococcus aureus), gram negative (Escherichia coli, Pseudomonas aeruginosa), and yeast (Candida albicans) demonstrating that the methanol extracts of some plants were efficacious antimicrobial agents. Additionally, cytotoxicity was assessed on human hepato carcinoma (HepG2) cancer cell lines and found that the extracts of Albizia lebbeck, Dillenia indica, and Bombax ceiba significantly decreased the cell viability at low concentrations with IC50 values of 24.03, 25.09, and 29.66 μg/mL, respectively. This is the first report of detection of phenolic compounds along with antimicrobial, antioxidant and cytotoxic potential of selected medicinal plants from India, which indicates that these plants might be valuable source for human and animal health.

Protection from potential exposures: application to selected radiation sources

International Nuclear Information System (INIS)

1997-09-01

This ICRP Report begins with the general principles of radiation protection in the case of potential exposures, followed by special issues in application and compliance with regulatory aims. The rest of the report uses event trees or fault trees to derive the logical structure of six scenarios of potential exposure, i.e. two irradiators, a large research accelerator, an accelerator for industrial isotope production, an industrial radiography device using a mobile source of radiation, and finally a medical gamma radiotherapy device. (UK)

Potentials of Selected Malaysian Biomasses as Co-Gasification Fuels with Oil Palm Fronds in a Fixed-Bed Downdraft Gasifier

Directory of Open Access Journals (Sweden)

Moni Mohamad Nazmi Zaidi

2014-07-01

Full Text Available Oil palm frond (OPF has been successfully gasified to produce syngas and has since deemed as a potential source of biomass fuel in Malaysia. However, if OPF is to be utilized as a main fuel for industrial-scale firing/gasification plant, interruption in fuel supply may occur due to numerous reasons, for instance inefficient fuel processing and ineffective transportation. A secondary supporting solid fuel is therefore necessary as a partial component to the main fuel in such cases, where the secondary fuel is combusted with the main fuel to adhere to main fuel shortage. Gasification of two fuels together, known as co-gasification, is practiced worldwide, some in industrial scale. However, current practice utilizes biomass fuel as the secondary fuel to coal in co-gasification. This investigation explores into the feasibility of co-gasifying two biomass fuels together to produce syngas. OPF was chosen as the primary fuel and a selection of Malaysian biomasses were studied to discover their compatibility with OPF in co-gasification. Biomass selection was made using score-and-rank method and their selection criteria are concisely discussed.

A study of algal biomass potential in selected Canadian regions.

Energy Technology Data Exchange (ETDEWEB)

Passell, Howard David; Roach, Jesse Dillon; Klise, Geoffrey T.

2011-11-01

A dynamic assessment model has been developed for evaluating the potential algal biomass and extracted biocrude productivity and costs, using nutrient and water resources available from waste streams in four regions of Canada (western British Columbia, Alberta oil fields, southern Ontario, and Nova Scotia). The purpose of this model is to help identify optimal locations in Canada for algae cultivation and biofuel production. The model uses spatially referenced data across the four regions for nitrogen and phosphorous loads in municipal wastewaters, and CO{sub 2} in exhaust streams from a variety of large industrial sources. Other data inputs include land cover, and solar insolation. Model users can develop estimates of resource potential by manipulating model assumptions in a graphic user interface, and updated results are viewed in real time. Resource potential by location can be viewed in terms of biomass production potential, potential CO{sub 2} fixed, biocrude production potential, and area required. The cost of producing algal biomass can be estimated using an approximation of the distance to move CO{sub 2} and water to the desired land parcel and an estimation of capital and operating costs for a theoretical open pond facility. Preliminary results suggest that in most cases, the CO{sub 2} resource is plentiful compared to other necessary nutrients (especially nitrogen), and that siting and prospects for successful large-scale algae cultivation efforts in Canada will be driven by availability of those other nutrients and the efficiency with which they can be used and re-used. Cost curves based on optimal possible siting of an open pond system are shown. The cost of energy for maintaining optimal growth temperatures is not considered in this effort, and additional research in this area, which has not been well studied at these latitudes, will be important in refining the costs of algal biomass production. The model will be used by NRC-IMB Canada to identify

Topology optimization of 3D shell structures with porous infill

DEFF Research Database (Denmark)

Clausen, Anders; Andreassen, Erik; Sigmund, Ole

2017-01-01

This paper presents a 3D topology optimization approach for designing shell structures with a porous or void interior. It is shown that the resulting structures are significantly more robust towards load perturbations than completely solid structures optimized under the same conditions. The study...... indicates that the potential benefit of using porous structures is higher for lower total volume fractions. Compared to earlier work dealing with 2D topology optimization, we found several new effects in 3D problems. Most notably, the opportunity for designing closed shells significantly improves...

Pasture height at the beginning of deferment as a determinant of signal grass structure and potential selectivity by cattle - doi: 10.4025/actascianimsci.v35i4.20421

Directory of Open Access Journals (Sweden)

Manoel Eduardo Rozalino Santos

2013-10-01

Full Text Available Current experiment identified the height of signal grass {Urochloa decumbens (Stapf R. D. Webster cv. Basilisk [syn. Brachiaria decumbens Stapf cv. Basilisk]} at the beginning of deferment that provided an appropriate pasture structure and potential selectivity by cattle on deferred pastures. Four pasture heights at the beginning of deferment (10, 20, 30 and 40 cm and two forage samples (available on pasture and simulated grazing were studied. The experimental design was set in completely randomized blocks, with two replications, in a split-plot arrangement. Higher percentage of live leaf blades and lower percentage of live stems and senescent forage were recorded in the forage sample from simulated grazing. The increase in pasture height increased the percentage of senescent forage and reduced the percentage of live leaf blades in forage samples. Pasture height at the beginning of deferment did not affect the potential selectivity index by cattle for the percentage of live leaf blade. The potential selectivity index varied quadratically for the percentage of live stems and increased linearly for the percentage of senescent forage with pasture height. A 10-to-20 cm reduction in pasture height at the beginning of deferment improved the structure of deferred signal grass and optimized selectivity by cattle.  

Wind Energy Potential and Power Law Indexes Assessment for Selected Near-Coastal Sites in Malaysia

Directory of Open Access Journals (Sweden)

Aliashim Albani

2017-03-01

Full Text Available This paper investigated the wind energy potential by analysing a certain amount of gathered 10-min measured data at four stations located at coastal sites in Malaysia, i.e., Kudat, Mersing, Kijal, and Langkawi. The wind data are collected from a total of four new wind measurement masts with sensors mounted at various heights on the tower. The measured data have enabled the establishment of wind resource maps and the power law indexes (PLIs analysis. In addition, the dependence of PLI upon surface temperature and terrain types is studied, as they are associated to the form of exponential fits. Moreover, the accuracy of exponential fits is assessed by comparing the results with the 1/7 law via the capacity factor (CF discrepancies. In order to do so, the wind turbine with a hub-height similar to the maximum height of the measured data at each site is selected to simulate energy production. Accordingly, the discrepancy of CF based on the extrapolated data by employing 1/7 laws and exponential fits, in spite of being computed using measured data, is determined as well. Furthermore, the large discrepancy of the wind data and the CF, which has been determined with the application of 1/7, is compared to the exponential fits. This is because; discrepancy in estimation of vertical wind speed could lead to inaccurate CF computation. Meanwhile, from the energy potential analysis based on the computed CF, only Kudat and Mersing display a promising potential to develop a medium capacity of wind turbine power, while the other sites may be suitable for wind turbines at a small scale.

A checkerboard selective absorber with excellent spectral selectivity

Energy Technology Data Exchange (ETDEWEB)

Yang, Liu, E-mail: optyang@zju.edu.cn [Centre for Optical and Electromagnetic Research, State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, Hangzhou 310058 (China); School of Electrical, Computer, and Engineering, Arizona State University, Tempe, Arizona 85287 (United States); Mo, Lei; Chen, Tuo [Centre for Optical and Electromagnetic Research, State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, Hangzhou 310058 (China); Department of Physics, Zhejiang University, Hangzhou 310027 (China); Forsberg, Erik [Centre for Optical and Electromagnetic Research, State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, Hangzhou 310058 (China); He, Sailing [Centre for Optical and Electromagnetic Research, State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, Hangzhou 310058 (China); Department of Electromagnetic Engineering, JORCEP, Roy Institute of Technology (KTH), S-100 44 Stockholm (Sweden)

2015-11-14

A selective absorber with excellent spectral selectivity is proposed and analyzed. The absorber is based on a germanium (Ge) checkerboard on top of a tantalum (Ta) substrate. At wavelengths shorter than the 1.2 μm cutoff, a very high absorption is achieved due to strong cavity resonances in the Ge nanosquares, and their interactions with adjacent nanocavities and the bottom Ta substrate. At longer wavelengths, absorption is greatly suppressed due to destructive interference between the transparent checkerboard layer and the highly reflective Ta substrate. To better describe the superior selectivity of our configuration, a new figure of merit (FOM) is introduced. We observe a FOM value of 0.88 compared to 0.69 for its planar counterpart. We also conduct a thermal analysis to verify the excellent selectivity of our absorber. A high temperature can be achieved and maintained, promising good potential for applications in solar thermophotovoltaic systems.

Skin denervation does not alter cortical potentials to surface concentric electrode stimulation: A comparison with laser evoked potentials and contact heat evoked potentials.

Science.gov (United States)

La Cesa, S; Di Stefano, G; Leone, C; Pepe, A; Galosi, E; Alu, F; Fasolino, A; Cruccu, G; Valeriani, M; Truini, A

2018-01-01

In the neurophysiological assessment of patients with neuropathic pain, laser evoked potentials (LEPs), contact heat evoked potentials (CHEPs) and the evoked potentials by the intraepidermal electrical stimulation via concentric needle electrode are widely agreed as nociceptive specific responses; conversely, the nociceptive specificity of evoked potentials by surface concentric electrode (SE-PREPs) is still debated. In this neurophysiological study we aimed at verifying the nociceptive specificity of SE-PREPs. We recorded LEPs, CHEPs and SE-PREPs in eleven healthy participants, before and after epidermal denervation produced by prolonged capsaicin application. We also used skin biopsy to verify the capsaicin-induced nociceptive nerve fibre loss in the epidermis. We found that whereas LEPs and CHEPs were suppressed after capsaicin-induced epidermal denervation, the surface concentric electrode stimulation of the same denervated skin area yielded unchanged SE-PREPs. The suppression of LEPs and CHEPs after nociceptive nerve fibre loss in the epidermis indicates that these techniques are selectively mediated by nociceptive system. Conversely, the lack of SE-PREP changes suggests that SE-PREPs do not provide selective information on nociceptive system function. Capsaicin-induced epidermal denervation abolishes laser evoked potentials (LEPs) and contact heat evoked potentials (CHEPs), but leaves unaffected pain-related evoked potentials by surface concentric electrode (SE-PREPs). These findings suggest that unlike LEPs and CHEPs, SE-PREPs are not selectively mediated by nociceptive system. © 2017 European Pain Federation - EFIC®.

Selective oxidation of methionine residues in apolipoprotein A-I and its potential biological consequences

International Nuclear Information System (INIS)

Panzenboeck, U.; Waldeck, R.; Rye, K.A.; Sloane, T.; Kritharides, L.; Stocker, R.

1998-01-01

findings suggest that selective oxidation of Met residues of apo A-I may enhance rather than diminish known antiatherogenic activities of the apolipoprotein. Thus, our results are consistent with the overall hypothesis that detoxification of lipid hydroperoxides by Met residues of apo A-I is potentially antiatherogenic

Identification of selection footprints on the X chromosome in pig.

Directory of Open Access Journals (Sweden)

Yunlong Ma

Full Text Available Identifying footprints of selection can provide a straightforward insight into the mechanism of artificial selection and further dig out the causal genes related to important traits. In this study, three between-population and two within-population approaches, the Cross Population Extend Haplotype Homozygosity Test (XPEHH, the Cross Population Composite Likelihood Ratio (XPCLR, the F-statistics (Fst, the Integrated Haplotype Score (iHS and the Tajima's D, were implemented to detect the selection footprints on the X chromosome in three pig breeds using Illumina Porcine60K SNP chip. In the detection of selection footprints using between-population methods, 11, 11 and 7 potential selection regions with length of 15.62 Mb, 12.32 Mb and 9.38 Mb were identified in Landrace, Chinese Songliao and Yorkshire by XPEHH, respectively, and 16, 13 and 17 potential selection regions with length of 15.20 Mb, 13.00 Mb and 19.21 Mb by XPCLR, 4, 2 and 4 potential selection regions with length of 3.20 Mb, 1.60 Mb and 3.20 Mb by Fst. For within-population methods, 7, 10 and 9 potential selection regions with length of 8.12 Mb, 8.40 Mb and 9.99 Mb were identified in Landrace, Chinese Songliao and Yorkshire by iHS, and 4, 3 and 2 potential selection regions with length of 3.20 Mb, 2.40 Mb and 1.60 Mb by Tajima's D. Moreover, the selection regions from different methods were partly overlapped, especially the regions around 22∼25 Mb were detected under selection in Landrace and Yorkshire while no selection in Chinese Songliao by all three between-population methods. Only quite few overlap of selection regions identified by between-population and within-population methods were found. Bioinformatics analysis showed that the genes relevant with meat quality, reproduction and immune were found in potential selection regions. In addition, three out of five significant SNPs associated with hematological traits reported in our genome-wide association study were harbored in

DESAIN BANGUNAN BARU PADA KAWASAN PELESTARIAN DI SURABAYA

Directory of Open Access Journals (Sweden)

Timoticin Kwanda

2004-01-01

Full Text Available After a period of property crash in 1997, later in 2001 the increase of economic growth has produced new infill building development or infill design in the heritage areas of Surabaya. According to some internationally known charters and recommendations, principles of new infill design in the heritage areas have been developed, such as the Recommendation concerning the Safeguarding and Contemporary Role of Historic Areas (UNESCO, 1976, the Washington Charter (1987, and the World Heritage Cities Management Guide (UNESCO, 1991. In general, the principles state that new infill design should be undertaken in an architectural style which is compatible with the surrounding character of buildings and the context. Unfortunately in Surabaya, some cases of new infill designs have damaged the character of the heritage areas. Therefore, in the future the city of Surabaya should ensuring that new infill design is appropriate by preparing design guidelines, conservation plan and conservation areas. Abstract in Bahasa Indonesia : Setelah kehancuran usaha propeti yang terjadi pada tahun 1997, pada tahun 2001 pertumbuhan ekonomi telah menghasilkan pembangunan bangunan baru atau infill design pada kawasan pelestarian di Surabaya. Berdasarkan beberapa piagam yang dikenal didunia, prinsip-prinsip desain bangunan baru pada kawasan pelestarian telah dikenal seperti The Recommendation concerning the Safeguarding and Contemporary Role of Historic Areas (UNESCO, 1976, The Washington Charter (1987, and The World Heritage Cities Management Guide (UNESCO, 1991. Secara umum, prinsip-prinsip ini menyatakan bahwa desain bangunan baru harus dilaksanakan dengan memperhatikan langgam arsitektur yang serasi dengan karakter dan konteks bangunan-bangunan disekitarnya. Namun sangat disayangkan bahwa di Surabaya beberapa kasus desain bangunan baru telah merusak karakter kawasan pelestarian. Oleh karena itu, pada masa yang akan datang kota Surabaya harus memastikan bahwa desain

The Effects of Temperature and CO2-induced Acidification on Skeletal Morphology of the Tropical Reef-building Coral Siderastrea siderea

Science.gov (United States)

Cobleigh, K.

2016-02-01

Coral reefs are threatened by increasing sea surface temperatures and decreasing surface seawater pH. Although numerous experimental studies have examined the effects of these global scale stressors on corals, few have quantified the effects of temperature and acidification on coral skeletal morphology. We conducted controlled laboratory experiments to investigate the effects of temperature (25, 28, 32°C) and CO2-induced ocean acidification (pCO2 = 324, 477, 604, 2553 µatm) on skeletal morphology of the highly resilient Caribbean reef-building coral Siderastrea siderea over a 95-day interval. Post-treatment S. siderea corallites from nearshore, backreef, and forereef colonies were imaged via stereo microscopy to evaluate impact of warming and acidification on corallite height and infilling. Both an increase and decrease in temperature relative to the control (i.e., near-present-day temperatures) resulted in increased corallite height but decreased skeletal infilling. In contrast, corals reared under the lowest (i.e., pre-industrial) and highest pCO2 treatments (i.e., extreme pCO2) exhibited both decreased corallite height and skeletal infilling relative to the control. We observed no difference in corallite height or infilling across reef zones, either within or across treatments. Interestingly, the warming projected for the end of the 21st century (32°C) resulted in increased corallite height and reduced corallite infilling. Acidification projected for the same interval (pCO2 = 604 µatm) also resulted in increased corallite height and decreased infilling. Collectively, our results suggest that these two global stressors will result in S. siderea corallites that are taller yet less infilled by the end of the 21st century. Changes in S. siderea arising from warming and acificiation may exacerbate observed declines in coral health across Caribbean reef systems.

Drug product selection: legal issues.

Science.gov (United States)

Christensen, T P; Kirking, D M; Ascione, F J; Welage, L S; Gaither, C A

2001-01-01

To review the potential legal liability of the pharmacist in the drug product selection process. Published articles identified through MEDLINE, published law reviews identified through InfoTrac, and appellate court decisions. Search terms used included pharmacist liability, drug product selection, and generic substitution. Additional articles, books, and appellate court decisions were identified from the bibliographies of retrieved articles and citations in appellate court decisions. Pharmacists engaging in drug product selection are civilly liable under three legal theories: negligence, express or implied warranties, and strict product liability. Potential criminal liability includes prosecution for insurance fraud, deceptive business practices, and violation of state drug product selection laws and regulation. Pharmacists increase their liability when engaging in drug product selection, but the increase is small. Still, the law continues to evolve as pharmacists seek expanded roles and responsibilities. When courts give closer examination to pharmacists' expanded role, it is likely that pharmacists' liability will increase.

Evaluation of the use of automatic exposure control and automatic tube potential selection in low-dose cerebrospinal fluid shunt head CT

Energy Technology Data Exchange (ETDEWEB)

Wallace, Adam N.; Bagade, Swapnil; Chatterjee, Arindam; Hicks, Brandon; McKinstry, Robert C. [Barnes Jewish Hospital, Mallinckrodt Institute of Radiology, St. Louis, MO (United States); Washington University School of Medicine, St. Louis, MO (United States); Vyhmeister, Ross [Washington University School of Medicine, St. Louis, MO (United States); Ramirez-Giraldo, Juan Carlos [Siemens Healthcare, Malvern, PA (United States)

2015-03-17

Cerebrospinal fluid shunts are primarily used for the treatment of hydrocephalus. Shunt complications may necessitate multiple non-contrast head CT scans resulting in potentially high levels of radiation dose starting at an early age. A new head CT protocol using automatic exposure control and automated tube potential selection has been implemented at our institution to reduce radiation exposure. The purpose of this study was to evaluate the reduction in radiation dose achieved by this protocol compared with a protocol with fixed parameters. A retrospective sample of 60 non-contrast head CT scans assessing for cerebrospinal fluid shunt malfunction was identified, 30 of which were performed with each protocol. The radiation doses of the two protocols were compared using the volume CT dose index and dose length product. The diagnostic acceptability and quality of each scan were evaluated by three independent readers. The new protocol lowered the average volume CT dose index from 15.2 to 9.2 mGy representing a 39 % reduction (P < 0.01; 95 % CI 35-44 %) and lowered the dose length product from 259.5 to 151.2 mGy/cm representing a 42 % reduction (P < 0.01; 95 % CI 34-50 %). The new protocol produced diagnostically acceptable scans with comparable image quality to the fixed parameter protocol. A pediatric shunt non-contrast head CT protocol using automatic exposure control and automated tube potential selection reduced patient radiation dose compared with a fixed parameter protocol while producing diagnostic images of comparable quality. (orig.)

Selective serotonin reuptake inhibitors potentiate the rapid antidepressant-like effects of serotonin4 receptor agonists in the rat.

Directory of Open Access Journals (Sweden)

Guillaume Lucas

2010-02-01

Full Text Available We have recently reported that serotonin(4 (5-HT(4 receptor agonists have a promising potential as fast-acting antidepressants. Here, we assess the extent to which this property may be optimized by the concomitant use of conventional antidepressants.We found that, in acute conditions, the 5-HT(4 agonist prucalopride was able to counteract the inhibitory effect of the selective serotonin reuptake inhibitors (SSRI fluvoxamine and citalopram on 5-HT neuron impulse flow, in Dorsal Raphé Nucleus (DRN cells selected for their high (>1.8 Hz basal discharge. The co-administration of both prucalopride and RS 67333 with citalopram for 3 days elicited an enhancement of DRN 5-HT neuron average firing rate, very similar to what was observed with either 5-HT(4 agonist alone. At the postsynaptic level, this translated into the manifestation of a tonus on hippocampal postsynaptic 5-HT(1A receptors, that was two to three times stronger when the 5-HT(4 agonist was combined with citalopram. Similarly, co-administration of citalopram synergistically potentiated the enhancing effect of RS 67333 on CREB protein phosphorylation within the hippocampus. Finally, in the Forced Swimming Test, the combination of RS 67333 with various SSRIs (fluvoxamine, citalopram and fluoxetine was more effective to reduce time of immobility than the separate administration of each compound.These findings strongly suggest that the adjunction of an SSRI to a 5-HT(4 agonist may help to optimize the fast-acting antidepressant efficacy of the latter.

Ion-selective electrode reviews

CERN Document Server

Thomas, J D R

1982-01-01

Ion-Selective Electrode Reviews, Volume 3, provides a review of articles on ion-selective electrodes (ISEs). The volume begins with an article on methods based on titration procedures for surfactant analysis, which have been developed for discrete batch operation and for continuous AutoAnalyser use. Separate chapters deal with detection limits of ion-selective electrodes; the possibility of using inorganic ion-exchange materials as ion-sensors; and the effect of solvent on potentials of cells with ion-selective electrodes. Also included is a chapter on advances in calibration procedures, the d

In vitro selection of bacteria with potential for use as probiotics in marine shrimp culture

Directory of Open Access Journals (Sweden)

Felipe do Nascimento Vieira

2013-08-01

Full Text Available The objective of this work was to isolate strains of lactic acid bacteria with probiotic potential from the digestive tract of marine shrimp (Litopenaeus vannamei, and to carry out in vitro selection based on multiple characters. The ideotype (ideal proposed strain was defined by the highest averages for the traits maximum growth velocity, final count of viable cells, and inhibition halo against nine freshwater and marine pathogens, and by the lowest averages for the traits duplication time and resistance of strains to NaCl (1.5 and 3%, pH (6, 8, and 9, and biliary salts (5%. Mahalanobis distance (D² was estimated among the evaluated strains, and the best ones were those with the shortest distances to the ideotype. Ten bacterial strains were isolated and biochemically identified as Lactobacillus plantarum (3, L. brevis (3, Weissella confusa (2, Lactococcus lactis (1, and L. delbrueckii (1. Lactobacillus plantarum strains showed a wide spectrum of action and the largest inhibition halos against pathogens, both Gram-positive and negative, high growth rate, and tolerance to all evaluated parameters. In relation to ideotype, L. plantarum showed the lowest Mahalanobis (D² distance, followed by the strains of W. confusa, L. brevis, L. lactis, and L. delbrueckii. Among the analyzed bacterial strains, those of Lactobacillus plantarum have the greatest potential for use as a probiotic for marine shrimp.

Distribution and Potential Mobility of Selected Heavy Metals in a Fluvial Environment Under the Influence of Tanneries

Directory of Open Access Journals (Sweden)

Rodrigues M. L. K.

2013-04-01

Full Text Available In this study we evaluated the occurrence of heavy metals in a fluvial environment under the influence of tanneries – the Cadeia and Feitoria rivers basin (RS, south Brazil, highlighting the distribution and potential mobility of the selected elements. Every three months, over one year-period, selected heavy metals and ancillary parameters were analyzed in water and sediment samples taken at ten sites along the rivers. Water analyses followed APHA recommendations, and sediment analyses were based on methods from USEPA (SW846 and European Community (BCR sequential extraction. The determinations were performed by ICP/OES, except for Hg (CV/ETA. Statistical factor analysis was applied to water and sediment data sets, in order to obtain a synthesis of the environmental diagnosis. The results revealed that water quality decreased along the rivers, and mainly on the dry period (January, showing the influence of tannery plants vicinity and flow variations. Except for Fe, Al, and eventually Mn, heavy metal contents in water were in agreement with Brazilian standards. Concerning sediments, Al, Cu, Fe, Ni, Mn, Ti, and Zn concentrations appeared to reflect the base levels, while Cr and Hg were enriched in the deposits from the lower part of the basin. The partition of heavy metals among the sediment geochemical phases showed higher mobility of Mn along the sampling sites, followed by Cr in the lower reach of the basin, most affected by tanneries. Since Cr was predominantly associated to the oxidizable fraction, its potential mobilization from contaminated sediments would be associated to redox conditions. The detection of Hg in the tissue of a bottom-fish species indicated that the environmental conditions are apparently favoring the remobilization of this metal from contaminated sediments.

Selection of potential probiotic lactic acid bacteria from fermented olives by in vitro tests.

Science.gov (United States)

Argyri, Anthoula A; Zoumpopoulou, Georgia; Karatzas, Kimon-Andreas G; Tsakalidou, Effie; Nychas, George-John E; Panagou, Efstathios Z; Tassou, Chrysoula C

2013-04-01

The present study aims to evaluate the probiotic potential of lactic acid bacteria (LAB) isolated from naturally fermented olives and select candidates to be used as probiotic starters for the improvement of the traditional fermentation process and the production of newly added value functional foods. Seventy one (71) lactic acid bacterial strains (17 Leuconostoc mesenteroides, 1 Ln. pseudomesenteroides, 13 Lactobacillus plantarum, 37 Lb. pentosus, 1 Lb. paraplantarum, and 2 Lb. paracasei subsp. paracasei) isolated from table olives were screened for their probiotic potential. Lb. rhamnosus GG and Lb. casei Shirota were used as reference strains. The in vitro tests included survival in simulated gastrointestinal tract conditions, antimicrobial activity (against Listeria monocytogenes, Salmonella Enteritidis, Escherichia coli O157:H7), Caco-2 surface adhesion, resistance to 9 antibiotics and haemolytic activity. Three (3) Lb. pentosus, 4 Lb. plantarum and 2 Lb. paracasei subsp. paracasei strains demonstrated the highest final population (>8 log cfu/ml) after 3 h of exposure at low pH. The majority of the tested strains were resistant to bile salts even after 4 h of exposure, while 5 Lb. plantarum and 7 Lb. pentosus strains exhibited partial bile salt hydrolase activity. None of the strains inhibited the growth of the pathogens tested. Variable efficiency to adhere to Caco-2 cells was observed. This was the same regarding strains' susceptibility towards different antibiotics. None of the strains exhibited β-haemolytic activity. As a whole, 4 strains of Lb. pentosus, 3 strains of Lb. plantarum and 2 strains of Lb. paracasei subsp. paracasei were found to possess desirable in vitro probiotic properties similar to or even better than the reference probiotic strains Lb. casei Shirota and Lb. rhamnosus GG. These strains are good candidates for further investigation both with in vivo studies to elucidate their potential health benefits and in olive fermentation processes

Acute stress alters auditory selective attention in humans independent of HPA: a study of evoked potentials.

Directory of Open Access Journals (Sweden)

Ludger Elling

Full Text Available BACKGROUND: Acute stress is a stereotypical, but multimodal response to a present or imminent challenge overcharging an organism. Among the different branches of this multimodal response, the consequences of glucocorticoid secretion have been extensively investigated, mostly in connection with long-term memory (LTM. However, stress responses comprise other endocrine signaling and altered neuronal activity wholly independent of pituitary regulation. To date, knowledge of the impact of such "paracorticoidal" stress responses on higher cognitive functions is scarce. We investigated the impact of an ecological stressor on the ability to direct selective attention using event-related potentials in humans. Based on research in rodents, we assumed that a stress-induced imbalance of catecholaminergic transmission would impair this ability. METHODOLOGY/PRINCIPAL FINDINGS: The stressor consisted of a single cold pressor test. Auditory negative difference (Nd and mismatch negativity (MMN were recorded in a tonal dichotic listening task. A time series of such tasks confirmed an increased distractibility occurring 4-7 minutes after onset of the stressor as reflected by an attenuated Nd. Salivary cortisol began to rise 8-11 minutes after onset when no further modulations in the event-related potentials (ERP occurred, thus precluding a causal relationship. This effect may be attributed to a stress-induced activation of mesofrontal dopaminergic projections. It may also be attributed to an activation of noradrenergic projections. Known characteristics of the modulation of ERP by different stress-related ligands were used for further disambiguation of causality. The conjuncture of an attenuated Nd and an increased MMN might be interpreted as indicating a dopaminergic influence. The selective effect on the late portion of the Nd provides another tentative clue for this. CONCLUSIONS/SIGNIFICANCE: Prior studies have deliberately tracked the adrenocortical influence

The Unicorn Cave, Southern Harz Mountains, Germany: From known passages to unknown extensions with the help of geophysical surveys

Science.gov (United States)

Kaufmann, Georg; Nielbock, Ralf; Romanov, Douchko

2015-12-01

In soluble rocks (limestone, dolomite, anhydrite, gypsum, …), fissures and bedding partings can be enlarged with time by both physical and chemical dissolution of the host rock. With time, larger cavities evolve, and a network of cave passages can evolve. If the enlarged cave voids are not too deep under the surface, geophysical measurements can be used to detect, identify and trace these karst structures, e.g.: (i) gravity revealing air- and sediment-filled cave voids through negative Bouguer anomalies, (ii) electrical resistivity imaging (ERI) mapping different infillings of cavities either as high resistivities from air-filled voids or dry soft sediments, or low resistivities from saturated sediments, and (iii) groundwater flow through electrical potential differences (SP) arising from dislocated ionic charges from the walls of the underground flow paths. We have used gravity, ERI, and SP methods both in and above the Unicorn Cave located in the southern Harz Mountains in Germany. The Unicorn Cave is a show cave developed in the Werra dolomite formation of the Permian Zechstein sequence, characterised by large trunk passages interrupted by larger rooms. The overburden of the cave is only around 15 m, and passages are filled with sediments reaching infill thicknesses up to 40 m. We present results from our geophysical surveys above the known cave and its northern and southern extension, and from the cave interior. We identify the cave geometry and its infill from gravity and ERI measurements, predict previously unknown parts of the cave, and subsequently confirm the existence of these new passages through drilling. From the wealth of geophysical data acquired we derive a three-dimensional structural model of the Unicorn Cave and its surrounding, especially the cave infill.

Feature-selective attention in healthy old age: a selective decline in selective attention?

Science.gov (United States)

Quigley, Cliodhna; Müller, Matthias M

2014-02-12

Deficient selection against irrelevant information has been proposed to underlie age-related cognitive decline. We recently reported evidence for maintained early sensory selection when older and younger adults used spatial selective attention to perform a challenging task. Here we explored age-related differences when spatial selection is not possible and feature-selective attention must be deployed. We additionally compared the integrity of feedforward processing by exploiting the well established phenomenon of suppression of visual cortical responses attributable to interstimulus competition. Electroencephalogram was measured while older and younger human adults responded to brief occurrences of coherent motion in an attended stimulus composed of randomly moving, orientation-defined, flickering bars. Attention was directed to horizontal or vertical bars by a pretrial cue, after which two orthogonally oriented, overlapping stimuli or a single stimulus were presented. Horizontal and vertical bars flickered at different frequencies and thereby elicited separable steady-state visual-evoked potentials, which were used to examine the effect of feature-based selection and the competitive influence of a second stimulus on ongoing visual processing. Age differences were found in feature-selective attentional modulation of visual responses: older adults did not show consistent modulation of magnitude or phase. In contrast, the suppressive effect of a second stimulus was robust and comparable in magnitude across age groups, suggesting that bottom-up processing of the current stimuli is essentially unchanged in healthy old age. Thus, it seems that visual processing per se is unchanged, but top-down attentional control is compromised in older adults when space cannot be used to guide selection.

Hyaluronic acid binding ability of human sperm reflects cellular maturity and fertilizing potential: selection of sperm for intracytoplasmic sperm injection.

Science.gov (United States)

Huszar, Gabor; Ozkavukcu, Sinan; Jakab, Attila; Celik-Ozenci, Ciler; Sati, G Leyla; Cayli, Sevil

2006-06-01

The current concepts of sperm biochemical markers and the central role of the HspA2 chaperone protein, a measure of sperm cellular maturity and fertilizing potential, are reviewed. Because HspA2 is a component of the synaptonemal complex, low HspA2 levels and increased frequency of chromosomal aneuploidies are related in diminished maturity sperm. We also suggest a relationship between HspA2 expression in elongating spermatids and events of late spermiogenesis, such as cytoplasmic extrusion and plasma membrane remodeling that aid the formation of the zona pellucida binding and hyaluronic acid binding sites. The presence of hyaluronic acid receptor on the plasma membrane of mature sperm, coupled with hyaluronic acid coated glass or plastic surfaces, facilitates testing of sperm function and selection of single mature sperm for intracytoplasmic sperm injection. The frequencies of sperm with chromosomal disomy are reduced approximately fourfold to fivefold in hyaluronic acid selected sperm compared with semen sperm, comparable to the increase in such abnormalities in intracytoplasmic sperm injection offspring. Hyaluronic acid binding also excludes immature sperm with cytoplasmic extrusion, persistent histones, and DNA chain breaks. Hyaluronic acid mediated sperm selection is a novel technique that is comparable to sperm zona pellucida binding. Hyaluronic acid selected sperm will also alleviate the risks related to intracytoplasmic sperm injection fertilization with sperm of diminished maturity that currently cause worldwide concern.

Function-Oriented Synthesis of Marine Phidianidine Derivatives as Potential PTP1B Inhibitors with Specific Selectivity

Directory of Open Access Journals (Sweden)

Jin Liu

2018-03-01

Full Text Available Phidianidines A and B are two novel marine indole alkaloids bearing an uncommon 1,2,4-oxadiazole ring and exhibiting various biological activities. Our previous research showed that the synthesized phidianidine analogs had the potential to inhibit the activity of protein tyrosine phosphatase 1B (PTP1B, a validated target for Type II diabetes, which indicates that these analogs are worth further structural modification. Therefore, in this paper, a series of phidianidine derivatives were designed and rapidly synthesized with a function-oriented synthesis (FOS strategy. Their inhibitory effects on PTP1B and T-cell protein tyrosine phosphatase (TCPTP were evaluated, and several compounds displayed significant inhibitory potency and specific selectivity over PTP1B. The structure–activity relationship (SAR and molecular docking analyses are also described.

Function-Oriented Synthesis of Marine Phidianidine Derivatives as Potential PTP1B Inhibitors with Specific Selectivity.

Science.gov (United States)

Liu, Jin; Chen, Yu; Li, Jing-Ya; Luo, Cheng; Li, Jia; Chen, Kai-Xian; Li, Xu-Wen; Guo, Yue-Wei

2018-03-20

Phidianidines A and B are two novel marine indole alkaloids bearing an uncommon 1,2,4-oxadiazole ring and exhibiting various biological activities. Our previous research showed that the synthesized phidianidine analogs had the potential to inhibit the activity of protein tyrosine phosphatase 1B (PTP1B), a validated target for Type II diabetes, which indicates that these analogs are worth further structural modification. Therefore, in this paper, a series of phidianidine derivatives were designed and rapidly synthesized with a function-oriented synthesis (FOS) strategy. Their inhibitory effects on PTP1B and T-cell protein tyrosine phosphatase (TCPTP) were evaluated, and several compounds displayed significant inhibitory potency and specific selectivity over PTP1B. The structure-activity relationship (SAR) and molecular docking analyses are also described.

Bioelectric action potentials of Procambarus acutus acutus (Girrard) in serially diluted solutions of selected C/sub 6/ hydrocarbons in water

Energy Technology Data Exchange (ETDEWEB)

Idoniboye-Obu, B.

1977-09-01

The principle of recording the complex action potentials from both neurogenic and myogenic sources by remote electrodes in water is explored in a bioassay assessing the external concentrations of selected water-soluble petroleum hydrocarbons. These petroleum hydrocarbons could bring about the ultimate cessation of impulse generation and propagation in short term exposures. Long before the harsh threshold of the ''death response'' itself is reached, a progressive diminution or irregularity of the biopotentials can indicate proximity to the ''point of no return''. This is particularly so in the locomotor system, which begins to function less and less effectively in decapod Crustacea, commonly known as very active animals. It is suggested that lethal thresholds of water pollution can be established in a systematic manner using selected test organisms, especially those of commercial importance, by such electrophysiological methods.

Fuzzy target selection using RFM variables

NARCIS (Netherlands)

Kaymak, U.

2001-01-01

An important data mining problem from the world of direct marketing is target selection. The main task in target selection is the determination of potential customers for a product from a client database. Target selection algorithms identify the profiles of customer groups for a particular product,

Evaluation of the use of automatic exposure control and automatic tube potential selection in low-dose cerebrospinal fluid shunt head CT.

Science.gov (United States)

Wallace, Adam N; Vyhmeister, Ross; Bagade, Swapnil; Chatterjee, Arindam; Hicks, Brandon; Ramirez-Giraldo, Juan Carlos; McKinstry, Robert C

2015-06-01

Cerebrospinal fluid shunts are primarily used for the treatment of hydrocephalus. Shunt complications may necessitate multiple non-contrast head CT scans resulting in potentially high levels of radiation dose starting at an early age. A new head CT protocol using automatic exposure control and automated tube potential selection has been implemented at our institution to reduce radiation exposure. The purpose of this study was to evaluate the reduction in radiation dose achieved by this protocol compared with a protocol with fixed parameters. A retrospective sample of 60 non-contrast head CT scans assessing for cerebrospinal fluid shunt malfunction was identified, 30 of which were performed with each protocol. The radiation doses of the two protocols were compared using the volume CT dose index and dose length product. The diagnostic acceptability and quality of each scan were evaluated by three independent readers. The new protocol lowered the average volume CT dose index from 15.2 to 9.2 mGy representing a 39 % reduction (P < 0.01; 95 % CI 35-44 %) and lowered the dose length product from 259.5 to 151.2 mGy/cm representing a 42 % reduction (P < 0.01; 95 % CI 34-50 %). The new protocol produced diagnostically acceptable scans with comparable image quality to the fixed parameter protocol. A pediatric shunt non-contrast head CT protocol using automatic exposure control and automated tube potential selection reduced patient radiation dose compared with a fixed parameter protocol while producing diagnostic images of comparable quality.

Immobilisation of shredded waste in a cement matrix

International Nuclear Information System (INIS)

James, J.M.; Smith, D.L.

1987-10-01

The work covered in the period of this report was aimed at proving the infilling capabilities of waste packages containing shredded paper and plastic simulant waste material held in a basket. The programme required the production of 200 and 500 litre packages and a demonstration that infilling could be attained to give a minimum of voidage in the completed cemented product. The procurement, testing and fitting of level detectors was an important part of this work to demonstrate a means of controlling the process to prevent overfilling of the packages. Evaluation of full-scale cemented products was required to confirm previously reported properties of density and homogeneity in packages produced by the reference encapsulation process and to demonstrate package integrity under sea-disposal conditions. A standard feedstock for the continuity of a long-term programme was required. Such a product, based on an analysis of arisings from plutonium gloveboxes, was produced in bulk and characterised. The previously observed movement of waste during infilling, due to its low density compared with that of the infill grout, required further assessment. During the period, 200, 400 and 500 litre drums required for future active infilling trials were modified and despatched to AERE Harwell for waste loading. These drums were fitted with level detectors and with grout spreader troughs which had been identified during the development programme. A prototype automated Grout Infill Test Rig designed by BNF plc was delivered to Winfrith towards the end of the period for practical assessment trials. (author)

Decrease in lactobacilli in the intestinal microbiota of celiac children with a gluten-free diet, and selection of potentially probiotic strains.

Science.gov (United States)

Lorenzo Pisarello, María J; Vintiñi, Elisa O; González, Silvia N; Pagani, Florencia; Medina, Marcela S

2015-01-01

The intestinal microbiota would be implicated in pathology associated with celiac disease caused by an abnormal immune system reaction against gluten present in cereal grains. The objectives of this work were to detect through basic methods the changes in the composition of the most common genera of bacteria from the intestinal microbiota of symptom-free celiac disease children with a gluten-free diet compared with healthy children from Tucumán and to select lactobacilli (Lb) strains with probiotic potential from the feces of healthy children. Results demonstrated that the feces of celiac children with a gluten-free diet showed significantly lower counts of Lb (P LC4) showed the highest percentage of autoaggregation while Lactobacillus paracasei (LC9) showed high hydrophobicity. Based on these results, LC4 and LC9 were selected, and their use as potential probiotic strains to improve signs and symptoms associated with celiac disease is discussed. This is the first study performed in Argentina concerning the relationship between intestinal microbiota and celiac disease in celiac children with a gluten-free diet. In addition, the development of a probiotic food addressed towards celiac patients and designed with Lb isolated from the feces of healthy children from our province represents a promising alternative to improve the quality of life of celiac patients.

T-R Cycle Characterization and Imaging: Advanced Diagnostic Methodology for Petroleum Reservoir and Trap Detection and Delineation

Energy Technology Data Exchange (ETDEWEB)

Ernest A. Mancini

2006-08-30

Characterization of stratigraphic sequences (T-R cycles or sequences) included outcrop studies, well log analysis and seismic reflection interpretation. These studies were performed by researchers at the University of Alabama, Wichita State University and McGill University. The outcrop, well log and seismic characterization studies were used to develop a depositional sequence model, a T-R cycle (sequence) model, and a sequence stratigraphy predictive model. The sequence stratigraphy predictive model developed in this study is based primarily on the modified T-R cycle (sequence) model. The T-R cycle (sequence) model using transgressive and regressive systems tracts and aggrading, backstepping, and infilling intervals or sections was found to be the most appropriate sequence stratigraphy model for the strata in the onshore interior salt basins of the Gulf of Mexico to improve petroleum stratigraphic trap and specific reservoir facies imaging, detection and delineation. The known petroleum reservoirs of the Mississippi Interior and North Louisiana Salt Basins were classified using T-R cycle (sequence) terminology. The transgressive backstepping reservoirs have been the most productive of oil, and the transgressive backstepping and regressive infilling reservoirs have been the most productive of gas. Exploration strategies were formulated using the sequence stratigraphy predictive model and the classification of the known petroleum reservoirs utilizing T-R cycle (sequence) terminology. The well log signatures and seismic reflector patterns were determined to be distinctive for the aggrading, backstepping and infilling sections of the T-R cycle (sequence) and as such, well log and seismic data are useful for recognizing and defining potential reservoir facies. The use of the sequence stratigraphy predictive model, in combination with the knowledge of how the distinctive characteristics of the T-R system tracts and their subdivisions are expressed in well log patterns

Estimating total evaporation at the field scale using the SEBS model ...

African Journals Online (AJOL)

Estimating total evaporation at the field scale using the SEBS model and data infilling ... of two infilling techniques to create a daily satellite-derived ET time series. ... and produced R2 and RMSE values of 0.33 and 2.19 mm∙d-1, respectively, ...

The potential use of exhausted open pit mine voids as sinks for atmospheric CO2: insights from natural reedbeds and mine water treatment wetlands

OpenAIRE

Younger, Paul L.; Mayes, William M.

2015-01-01

Abandoned surface mine voids are often left to flood, forming pit lakes. Drawing simple but important lessons from experiences with compost-based passive remediation systems for acidic mine waters, an alternative end-use for open pit mine voids is proposed: gradual infilling with organic material, which can serve as a long-term sink for atmospheric CO2, whilst ameliorating or eventually eliminating sustained evaporative water loss and acidic water pollution. Key to the success of this approac...

A Mineralized Collagen-Polycaprolactone Composite Promotes Healing of a Porcine Mandibular Defect.

Science.gov (United States)

Weisgerber, Daniel W; Milner, Derek J; Lopez-Lake, Heather; Rubessa, Marcello; Lotti, Sammi; Polkoff, Kathryn; Hortensius, Rebecca A; Flanagan, Colleen L; Hollister, Scott J; Wheeler, Matthew B; Harley, Brendan A C

2018-02-01

A tissue engineering approach to address craniofacial defects requires a biomaterial that balances macro-scale mechanical stiffness and strength with the micron-scale features that promote cell expansion and tissue biosynthesis. Such criteria are often in opposition, leading to suboptimal mechanical competence or bioactivity. We report the use of a multiscale composite biomaterial that integrates a polycaprolactone (PCL) reinforcement structure with a mineralized collagen-glycosaminoglycan scaffold to circumvent conventional tradeoffs between mechanics and bioactivity. The composite promotes activation of the canonical bone morphogenetic protein 2 (BMP-2) pathway and subsequent mineralization of adipose-derived stem cells in the absence of supplemental BMP-2 or osteogenic media. We subsequently examined new bone infill in the acellular composite, scaffold alone, or PCL support in 10 mm dia. ramus mandibular defects in Yorkshire pigs. We report an analytical approach to quantify radial, angular, and depth bone infill from micro-computed tomography data. The collagen-PCL composite showed improved overall infill, and significantly increased radial and angular bone infill versus the PCL cage alone. Bone infill was further enhanced in the composite for defects that penetrated the medullary cavity, suggesting recruitment of marrow-derived cells. These results indicate a multiscale mineralized collagen-PCL composite offers strategic advantages for regenerative repair of craniofacial bone defects.

Selective attention to sound location or pitch studied with event-related brain potentials and magnetic fields.

Science.gov (United States)

Degerman, Alexander; Rinne, Teemu; Särkkä, Anna-Kaisa; Salmi, Juha; Alho, Kimmo

2008-06-01

Event-related brain potentials (ERPs) and magnetic fields (ERFs) were used to compare brain activity associated with selective attention to sound location or pitch in humans. Sixteen healthy adults participated in the ERP experiment, and 11 adults in the ERF experiment. In different conditions, the participants focused their attention on a designated sound location or pitch, or pictures presented on a screen, in order to detect target sounds or pictures among the attended stimuli. In the Attend Location condition, the location of sounds varied randomly (left or right), while their pitch (high or low) was kept constant. In the Attend Pitch condition, sounds of varying pitch (high or low) were presented at a constant location (left or right). Consistent with previous ERP results, selective attention to either sound feature produced a negative difference (Nd) between ERPs to attended and unattended sounds. In addition, ERPs showed a more posterior scalp distribution for the location-related Nd than for the pitch-related Nd, suggesting partially different generators for these Nds. The ERF source analyses found no source distribution differences between the pitch-related Ndm (the magnetic counterpart of the Nd) and location-related Ndm in the superior temporal cortex (STC), where the main sources of the Ndm effects are thought to be located. Thus, the ERP scalp distribution differences between the location-related and pitch-related Nd effects may have been caused by activity of areas outside the STC, perhaps in the inferior parietal regions.

Effective selection of transgenic papaya plants with the PMI/Man selection system.

Science.gov (United States)

Zhu, Yun J; Agbayani, Ricelle; McCafferty, Heather; Albert, Henrik H; Moore, Paul H

2005-09-01

The selectable marker gene phospho-mannose isomerase (pmi), which encodes the enzyme phospho-mannose isomerase (PMI) to enable selection of transformed cell lines on media containing mannose (Man), was evaluated for genetic transformation of papaya (Carica papaya L.). We found that papaya embryogenic calli have little or no PMI activity and cannot utilize Man as a carbon source; however, when calli were transformed with a pmi gene, the PMI activity was greatly increased and they could utilize Man as efficiently as sucrose. Plants regenerated from selected callus lines also exhibited PMI activity but at a lower specific activity level. Our transformation efficiency with Man selection was higher than that reported using antibiotic selection or with a visual marker. For papaya, the PMI/Man selection system for producing transgenic plants is a highly efficient addition to previously published methods for selection and may facilitate the stacking of multiple transgenes of interest. Additionally, since the PMI/Man selection system does not involve antibiotic or herbicide resistance genes, its use might reduce environmental concerns about the potential flow of those genes into related plant populations.

Etude du comportement sous charges laterales des ossatures de beton arme avec murs de remplissage de maconnerie, construites avant les annees 1960

Science.gov (United States)

Lefebvre, Karine

Reinforced concrete structures with unreinforced masonry infills (BMR) are considered vulnerable to earthquakes. Under seismic actions, infills could fail (causing injuries or death) and cause damages to columns. In Quebec and Canada, most of BMR structures have been constructed prior to the introduction of modern seismic design codes raising question on the contribution of the infill to the structure lateral resistance. The aim of this thesis is to improve modelling technique of BMR structures built in Quebec between 1915 and 1960. This type of structures is found in hospitals or schools buildings, which must comply with some post-earthquake functionality requirements. They could also be residential or office buildings. Actually, practicing engineers usually calculate seismic capacity of BMR structures without considering the infill's structural contribution to the lateral resistance. Yet, this contribution should not be omitted. The first part of the thesis investigates the construction techniques and material properties of the old BMR structures in the Province. The results are the material properties (concrete, reinforcing steel, brick, terra cotta tile, and mortar) and the characteristics of the assemblies (wall section, reinforcement details…). The second part of the thesis presents the results of series of parametric analyses to identify among modelling and geometric parameters, which ones are the most influent on the lateral load response (rigidity, fundamental period, normal modes). Linear and modal analyses were performed. The most influent parameters identified are: number of storeys, number of bays, bay's width, soft storey, openings, upper storeys modelized (instead of being replaced by punctual loads) and the modelization technique of infills panels (strut or shell). Nonlinear static analyses have been performed to identify the most influent parameters to be considered for evaluating the lateral resistance, the capacity (load / displacement) and the

Selection and Characterization of Potential Baker's Yeast from Indigenous Resources of Nepal.

Science.gov (United States)

Karki, Tika B; Timilsina, Parash Mani; Yadav, Archana; Pandey, Gyanu Raj; Joshi, Yogesh; Bhujel, Sahansila; Adhikari, Rojina; Neupane, Katyayanee

2017-01-01

The study aims to isolate the yeast strains that could be used effectively as baker's yeast and compare them with the commercial baker's yeast available in the market of Nepal. A total of 10 samples including locally available sources like fruits, Murcha, and a local tree "Dar" were collected from different localities of Bhaktapur, Kavre, and Syangja districts of Nepal, respectively. Following enrichment and fermentation of the samples, 26 yeast strains were isolated using selective medium Wallerstein Laboratory Nutrient Agar. From the differential tests which included morphological and microscopic observation and physiological and biochemical characterization such as nitrate reduction and lactose utilization tests, 8 strains were selected as possible Saccharomyces strain. The selected strains were further assessed for their efficient leavening ability by tests such as ethanol tolerance, osmotolerance, invertase test, and stress exclusion test. The three most potent strains ENG, MUR3B, and SUG1 isolated from grape, Murcha, and sugarcane, respectively, were used in the fermentation and baking of dough. These strains also carried a possibility of being used as industrial baker's yeast.

Potential Study of Water Extraction from Selected Plants

Directory of Open Access Journals (Sweden)

Musa S.

2017-01-01

Full Text Available Water is absorbed by the roots of a plant and transported subsequently as a liquid to all parts of the plant before being released into the atmosphere as transpiration. In this study, seven(7selected plant species collected from urban, rural and forested areas were studied and characterized. The water was collected using transparent plastic bag that being tied to the tree branches. Then, the vapouris water trapped inside the plastic bag and through the condensation process, it become water droplets. Water quality parameters such as temperature, pH value, DO, turbidity, colour, magnesium, calcium, nitrate and chloride were analyzed. The analysis was compared to drinking water quality standard set by the Ministry of Health Malaysia. Based on the results, it shows that banana leaf has a higher rate of water extraction compared to others. Thus, the plant can be categorised as a helpful guide for emergency use of water or as an alternative source to survival.

Southern Appalachian hillslope erosion rates measured by soil and detrital radiocarbon in hollows

Science.gov (United States)

T.C. Hales; K.M. Scharer; R.M. Wooten

2012-01-01

Understanding the dynamics of sediment generation and transport on hillslopes provides important constraints on the rate of sediment output from orogenic systems. Hillslope sediment fluxes are recorded by organic material found in the deposits infilling unchanneled convergent topographic features called hollows. This study describes the first hollow infilling rates...

Characterizing Tire Crumb Rubber for Exposure Assessment

Science.gov (United States)

Tire crumb rubber derived from recycled tires is widely used as infill material in synthetic turf fields in the United States. An estimated 95% of the over 12,000 installed fields in the U.S. use tire crumb rubber infill alone or mixed with sand or alternative materials. Concerns...

Application of remote sensing data and geographic information system (GIS) in the selection of a NPP potential site in west Kalimantan

International Nuclear Information System (INIS)

Heni Susiati; Yarianto SBS; Kurnia Anzhar; Bansyah Kironi; June Mellawati

2015-01-01

Potential site selection on spatial basis which applied throughout the coast of West Kalimantan has been performed by adding additional criteria compare to the criteria used in 2014. The objective of research is to get the potential site of nuclear power plants (NPP) in the coastal areas of West Kalimantan Province based on the applicable criteria. Research methods include collecting of primary data, interpretation of remote sensing data, and weighting analysis based on SIG. The research results obtained six of potential site for NPP, i e., Air Besar Village Kendawangan Sub-district Ketapang Regency (first rank), Sie Village Simpang Hilir Sub-district Kayong Regency (second rank), Sungai Kanan Village Muara Sub-district Ketapang Regency (third rank), Sungai Nanjung Village Matan Sodascorbate Ketapang Regency (fourth rank), Kendawangan Kanan Village Kendawangan Sub-district Ketapang Regency (fifth rank) dan Sungai Nanjung Village Matan Sub-district Ketapang Regency, Matang Village Paloh Sub-district, Sambas Regency (sixth rank). Analysis of land suitability showed that all potential has met the general and specific criteria, among other things because it is not a peat and far away from the settlements. (author)

Please Wait, Processing: A Selective Literature Review of the Neurological Understanding of Emotional Processing in ASD and Its Potential Contribution to Neuroeducation

OpenAIRE

Shyman, Eric

2017-01-01

Autism spectrum disorder (ASD) and its corresponding conditions have been investigated from a multitude of perspectives resulting in varying understandings of its origin, its outplay, its prognosis, and potential methods of intervention and education for individuals with the disorder. One area that has contributed significantly to providing a different type of understanding is that of neuroscience, and specifically neuroimaging. This paper will offer a selective literature review of research ...

Opportunity for natural selection among some selected population groups of Northeast India.

Science.gov (United States)

Das, Farida Ahmed; Mithun, Sikdar

2010-05-01

Selection potential based on differential fertility and mortality has been computed for seven population groups inhabiting different geographical locations of Northeast India. Crow's as well as Johnston and Kensinger's index have been used for the present purpose. Irrespective of the methodology, the total index of selection was found to be highest among the Deoris followed by the Kaibartas. The lowest selection index was found among the Oraon population. If the relative contribution of fertility and mortality components to the total index is considered to be multiplicative, it is observed that in all these communities the fertility component exceeds that of mortality component, which may indicate initiation of demographic transitional phase in the selected populations with the betterment of healthcare and socioeconomic condition within the last few decades.

Evaluation of oenological potential on clonal selections of cv. Cabernet Sauvignon from Chile

Directory of Open Access Journals (Sweden)

Ceppi de Lecco C.

2014-01-01

Full Text Available 13 clonal selections of cv Cabernet Sauvignon, established in Nancagua VI Region, Chile (34.39 °S 71.17 °W. The genetic identity of the vines was confirmed by ampelography and microsatellite markers (SSR. Evaluations in the 2012–2013 season include: performance, analytical and sensorial parameters on the wines made by microvinification. The results were statistically analyzed with the Statgraphics Plus program and multiple comparison test of Tukey at 95% confidence level. Sensorially, the wines were evaluated by a panel of 12 experts. The results were likewise analyzed by testing principal components (PCA with covariance matrix without rotation. In the season studied the selection 108 highlighted with a high yield (kg/plant, in the composition of the wine selections generally highlighted for contents of total polyphenols and anthocyanins over average. The results show typical sensory characteristics of wines from that grape variety, and it was possible to group the selections by their attributes (PCA with cherry red wines at different intensities, but without significant differences, with fruity and vegetal aromas, interesting complex flavors and with structured tannins.

Potential exposure to endocrine disrupting chemicals and selected adverse pregnancy outcomes

DEFF Research Database (Denmark)

Bengtsson, Jessica; Thygesen, Pernille Søgaard; Kaerlev, Linda

2017-01-01

potential occupational exposure to endocrine disrupting chemicals (EDC) of the mother during pregnancy is associated with preterm birth and low birth weight. Methods: Pregnant women referred to an Occupational Health Clinic (OHC) in two Danish regions (Copenhagen or Aarhus) between 1984 and 2010, suspected...... on the suspicion of other exposures than EDC (n = 620), and to a sample of births by all occupationally active women in the same geographical regions (n = 346,544), including 1,077 births of the referred women’s non-referred pregnancies. Results: No indications of reduced birth weight or increased risk of preterm...... birth were found among women potentially exposed to EDC. Women potentially exposed to EDC had children with a higher birth weight compared to the sample of occupationally active women but not compared to other women referred to an OHC. Conclusions: Potential maternal exposure to EDC at Danish workplaces...

In vitro screening of potential probiotic activities of selected lactobacilli isolated from unpasteurized milk products for incorporation into soft cheese.

Science.gov (United States)

Coeuret, Valérie; Gueguen, Micheline; Vernoux, Jean Paul

2004-11-01

The aim was to select potentially probiotic lactobacilli from 88 strains isolated from unpasteurized milk and cheese products, and to incorporate these bacteria in a viable state into a soft cheese, without changing its quality. The survival of these bacteria was assessed in acidic and bile conditions, after freezing at -80 degrees C. Four strains from unpasteurized Camembert--two Lactobacillus plantarum strains and two Lb. paracasei/casei strains--were identified and typed by PCR and PFGE and were found to display potentially probiotic characteristics in addition to resistance to low pH and bile. These characteristics were resistance to lysozyme, adhesion to CACO-2 cells, antimicrobial effects against common foodborne pathogens (Listeria monocytogenes, Staphylococcus aureus, Salmonella spp., Escherichia coli, innocuity following the ingestion of high doses by mice and appropriate antibiotic susceptibility profiles. The potential of Lb. plantarum strain UCMA 3037 for incorporation into a soft cheese (Pont-l'Eveque registered designation of origin (RDO)) was investigated. This strain grew well and survived in sufficient numbers (more than 10(7) cfu/g throughout the shelf-life of the product) in the cheese. This strain did not change the quality score of the product until the best before date (75 days after manufacture). Thus, unpasteurized Camembert is a natural source of potentially probiotic lactobacilli, which could be used as an additive in the development of potentially probiotic soft cheeses. Further work is required to demonstrate the persistence and efficacy of these strains in the human host upon ingestion.

Displaced/re-worked rhodolith deposits infilling parts of a complex Miocene multistorey submarine channel: A case history from the Sassari area (Sardinia, Italy)

Science.gov (United States)

Murru, Marco; Bassi, Davide; Simone, Lucia

2015-08-01

In the Sassari area (north-western Sardinia, Italy), the Miocene Porto Torres sub-basin sequences represent the complex multistorey mixed carbonate-siliciclastic submarine feature called the Sassari Channel. During the late Burdigalian-early Serravallian, repeated terrigenous supplies from uplifted Paleozoic crystalline substrata fed the Sassari Channel system by means of turbidity and locally hyper-concentrated turbidity flows. Shelfal areas were the source of terrigenous clasts, but open shelf rhodalgal/foramol carbonate areas were very productive and largely also contributed to the channel infilling. Re-worked sands and skeletal debris were discontinuously re-sedimented offshore as pure terrigenous, mixed and/or carbonate deposits. Major sediment supply was introduced between the latest Burdigalian and the start of the middle Langhian, during which a large amount of carbonate, mixed and siliciclastic sediments reached the Porto Torres Basin (Sassari Channel I). Contributions from shallow proximal source areas typify the lower intervals (Unit A) in marginal sectors of the channel. Upward, these evolve into autochthonous rhodolith deposits, winnowed by strong currents in relatively shallow well lit settings within a complex network of narrow tidally-controlled channels (Unit D) locally bearing coral assemblages. Conversely, re-sedimented rhodoliths from the Units B and C accumulated under conditions of higher turbidity. In deeper parts of the channel taxonomically diversified rhodoliths point to the mixing of re-deposited skeletal components from different relatively deep bathmetric settings. In the latest early Langhian, major re-sedimentation episodes, resulting in large prograding bodies (Unit D), triggered by repeated regression pulses in a frame of persistent still stand. During these episodes photophile assemblages dwelled in the elevated margin sectors of the channel. A significant latest early Langhian drop in relative sea-level resulted in impressive mass

An application of zeta potential method for the selection of nano-fluids to enhance IVR capability

International Nuclear Information System (INIS)

Pham Quynh Trang; Kim, Tae Il; Chang, Soon Heung

2009-01-01

In-vessel Retention (IVR) is one of the key severe accident management strategies that have been applied currently for advanced light water reactors such as APR1000 or APR1400. The concept of IVR consists of external cooling of the reactor vessel by flooding the reactor cavity to remove the decay heat from the molten core through the lower head of the vessel. However, the heat removal process is limited by the occurrence of critical heat flux (CHF) at the reactor vessel outer surface that may lead to a sharp increase of local temperature, damaging the integrity of the reactor vessel. In order to obtain higher power of nuclear reactors and to assure the achievement of the IVR capability during accident conditions, an enhancement of CHF at the outer surface of the vessel is required. The potential use of nano-fluids to increase the CHF is among the main IVR enhancing approaches. In this study, Al 2 O 3 and CNT nano-fluids with different concentrations have been used as the potential coolant to enhance IVR capabilities. The dispersion stability of the nano-fluids was verified by zeta potential measurements. The results showed effects of time, concentration and pH on the stability of nanofluids. Three types of nano-fluids were selected as the candidates to apply for the IVR. A series of experiments have been performed in this study to understand the pool-boiling critical heat flux behavior on downward facing surfaces submerged in a pool of nano-fluids at very low concentration. The inclination angle was changed from horizontal to vertical to investigate the effect of orientation on CHF enhancement which is needed for the application in IVR

An Introduction to LANL Mixed Potential Sensors

Energy Technology Data Exchange (ETDEWEB)

Mukundan, Rangachary [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brosha, Eric Lanich [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kreller, Cortney [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-01-26

These are slides for a webinar given on the topics of an introduction to LANL mixed potential sensors. Topics include the history of LANL electrochemical sensor work, an introduction to mixed potential sensors, LANL uniqueness, and an application of LANL mixed potential sensors. The summary is as follows: Improved understanding of the mixed-potential sensor mechanism (factors controlling the sensor response identified), sensor design optimized to maximize sensor sensitivity and durability (porous electrolyte/dense electrodes), electrodes selected for various specific applications (CO, HC, H₂), sensor operating parameters optimized for improved gas selectivity (NO_x, NH₃).

Selective mutism.

Science.gov (United States)

Hua, Alexandra; Major, Nili

2016-02-01

Selective mutism is a disorder in which an individual fails to speak in certain social situations though speaks normally in other settings. Most commonly, this disorder initially manifests when children fail to speak in school. Selective mutism results in significant social and academic impairment in those affected by it. This review will summarize the current understanding of selective mutism with regard to diagnosis, epidemiology, cause, prognosis, and treatment. Studies over the past 20 years have consistently demonstrated a strong relationship between selective mutism and anxiety, most notably social phobia. These findings have led to the recent reclassification of selective mutism as an anxiety disorder in the Diagnostic and Statistical Manual of Mental Disorders, 5th Edition. In addition to anxiety, several other factors have been implicated in the development of selective mutism, including communication delays and immigration/bilingualism, adding to the complexity of the disorder. In the past few years, several randomized studies have supported the efficacy of psychosocial interventions based on a graduated exposure to situations requiring verbal communication. Less data are available regarding the use of pharmacologic treatment, though there are some studies that suggest a potential benefit. Selective mutism is a disorder that typically emerges in early childhood and is currently conceptualized as an anxiety disorder. The development of selective mutism appears to result from the interplay of a variety of genetic, temperamental, environmental, and developmental factors. Although little has been published about selective mutism in the general pediatric literature, pediatric clinicians are in a position to play an important role in the early diagnosis and treatment of this debilitating condition.

Muon counting using silicon photomultipliers in the AMIGA detector of the Pierre Auger observatory

NARCIS (Netherlands)

Aab, A.; Abreu, P.; Aglietta, M.; Ahn, E. J.; Al Samarai, I.; Albuquerque, I. F. M.; Allekotte, I.; Allison, P.; Almela, A.; Alvarez Castillo, J.; Alvarez-Muniz, J.; Ambrosio, M.; Anastasi, G. A.; Anchordoqui, L.; Andrada, B.; Andringa, S.; Aramo, C.; Arqueros, F.; Arsene, N.; Asorey, H.; Assis, P.; Aublin, J.; Avila, G.; Badescu, A. M.; Balaceanu, A.; Baus, C.; Beatty, J. J.; Becker, K. H.; Bellido, J. A.; Berat, C.; Bertaina, M. E.; Bertou, X.; Biermann, P. L.; Billoir, P.; Biteau, J.; Blaess, S. G.; Blanco, A.; Blazek, J.; Bleve, C.; Bohacova, M.; Boncioli, D.; Bonifazi, C.; Borodai, N.; Botti, A. M.; Brack, J.; Brancus, I.; Bretz, T.; Bridgeman, A.; Briechle, F. L.; Buchholz, P.; Bueno, A.; Buitink, S.; Buscemi, M.; Caballero-Mora, K. S.; Caccianiga, B.; Caccianiga, L.; Cancio, A.; Canfora, F.; Caramete, L.; Caruso, R.; Castellina, A.; Cataldi, G.; Cazon, L.; Cester, R.; Chavez, A. G.; Chiavassa, A.; Chinellato, J. A.; Chudoba, J.; Clay, R. W.; Colalillo, R.; Coleman, A.; Collica, L.; Coluccia, M. R.; Conceicao, R.; Contreras, F.; Cooper, M. J.; Coutu, S.; Covault, C. E.; Cronin, J.; Dallier, R.; D'Amico, S.; Daniel, B.; Dasso, S.; Daumiller, K.; Dawson, B. R.; de Almeida, R. M.; de Jong, S. J.; De Mauro, G.; de Mello Neto, J. R. T.; De Mitri, I.; de Oliveira, J.; de Souza, V.; Debatin, J.; del Peral, L.; Deligny, O.; Di Giulio, C.; Di Matteo, A.; Diaz Castro, M. L.; Diogo, F.; Dobrigkeit, C.; D'Olivo, J. C.; Dorofeev, A.; dos Anjos, R. C.; Dova, M. T.; Dundovic, A.; Ebr, J.; Engel, R.; Erdmann, M.; Erfani, M.; Escobar, C. O.; Espadanal, J.; Etchegoyen, A.; Falcke, H.; Fang, K.; Farrar, G.; Fauth, A. C.; Fazzini, N.; Fick, B.; Figueira, J. M.; Filevich, A.; Filipcic, A.; Fratu, O.; Freire, M. M.; Fujii, T.; Fuster, A.; Garcia, B.; Garcia-Pinto, D.; Gate, F.; Gemmeke, H.; Gherghel-Lascu, A.; Ghia, P. L.; Giaccari, U.; Giammarchi, M.; Giller, M.; Glas, D.; Glaser, C.; Glass, H.; Golup, G.; Gomez Berisso, M.; Gomez Vitale, P. F.; Gonzalez, N.; Gookin, B.; Gordon, J.; Gorgi, A.; Gorham, P.; Gouffon, P.; Grillo, A. F.; Grubb, T. D.; Guarino, F.; Guedes, G. P.; Hampel, M. R.; Hansen, P.; Harari, D.; Harrison, T. A.; Harton, J. L.; Hasankiadeh, Q.; Haungs, A.; Hebbeker, T.; Heck, D.; Heimann, P.; Herve, A. E.; Hill, G. C.; Hojvat, C.; Holt, E.; Homola, P.; Horandel, J. R.; Horvath, P.; Hrabovsky, M.; Huege, T.; Hulsman, J.; Insolia, A.; Isar, P. G.; Jandt, I.; Jansen, S.; Johnsen, J. A.; Josebachuili, M.; Kaeaepae, A.; Kambeitz, O.; Kampert, K. H.; Kasper, P.; Katkov, I.; Keilhauer, B.; Kemp, E.; Kieckhafer, R. M.; Klages, H. O.; Kleifges, M.; Kleinfeller, J.; Krause, R.; Krohm, N.; Kuempel, D.; Mezek, G. Kukec; Kunka, N.; Awad, A. Kuotb; LaHurd, D.; Latronico, L.; Lauscher, M.; Lautridou, P.; Lebrun, P.; Legumina, R.; Leigui de Oliveira, M. A.; Letessier-Selvon, A.; Lhenry-Yvon, I.; Link, K.; Lopes, L.; Lopez, R.; Lopez Casado, A.; Luce, Q.; Lucero, A.; Malacari, M.; Mallamaci, M.; Mandat, D.; Mantsch, P.; Mariazzi, A. G.; Maris, I. C.; Marsella, G.; Martello, D.; Martinez, H.; Martinez Bravo, O.; Masias Meza, J. J.; Mathes, H. J.; Mathys, S.; Matthews, J.; Matthews, J. A. J.; Matthiae, G.; Mayotte, E.; Mazur, P. O.; Medina, C.; Medina-Tanco, G.; Melo, D.; Menshikov, A.; Messina, S.; Micheletti, M. I.; Middendorf, L.; Minaya, I. A.; Miramonti, L.; Mitrica, B.; Mockler, D.; Molina-Bueno, L.; Mollerach, S.; Montanet, F.; Morello, C.; Mostafa, M.; Mueller, G.; Muller, M. A.; Mueller, S.; Naranjo, I.; Navas, S.; Nellen, L.; Neuser, J.; Nguyenu, P. H.; Niculescu-Oglinzanu, M.; Niechciol, M.; Niemietz, L.; Niggemann, T.; Nitz, D.; Nosek, D.; Novotny, V.; Nozka, H.; Nunez, L. A.; Ochilo, L.; Oikonomou, F.; Olinto, A.; Selmi-Dei, D. Pakk; Palatka, M.; Pallotta, J.; Papenbreer, P.; Parente, G.; Parra, A.; Paul, T.; Pech, M.; Pedreira, F.; Pekala, J.; Pelayo, R.; Pena-Rodriguez, J.; Pereira, L. A. S.; Perrone, L.; Peters, C.; Petrera, S.; Phuntsok, J.; Piegaia, R.; Pierog, T.; Pieroni, P.; Pimenta, M.; Pirronello, V.; Platino, M.; Plum, M.; Porowski, C.; Prado, R. R.; Privitera, P.; Prouza, M.; Quel, E. J.; Querchfeld, S.; Quinn, S.; Ramos-Pollant, R.; Rautenberg, J.; Ravel, O.; Ravignani, D.; Reinert, D.; Revenue, B.; Ridky, J.; Risse, M.; Ristori, P.; Rizi, V.; Rodrigues de Carvalho, W.; Fernandez, G. Rodriguez; Rodriguez Rojo, J.; Rodriguez-Frias, M. D.; Rogozin, D.; Rosado, J.; Roth, M.; Roulet, E.; Rovero, A. C.; Saffi, S. J.; Saftoiu, A.; Salazar, H.; Saleh, A.; Greus, F. Salesa; Salina, G.; Sanabria Gomez, J. D.; Sanchez, F.; Sanchez-Lucas, P.; Santos, E. M.; Santos, E.; Sarazin, F.; Sarkar, B.; Sarmento, R.; Sarmiento-Cano, C.; Sato, R.; Scarso, C.; Schauer, M.; Scherini, V.; Schieler, H.; Schmidt, D.; Scholten, O.; Schovanek, P.; Schroeder, F. G.; Schulz, A.; Schulz, J.; Schumacher, J.; Sciutto, S. J.; Segreto, A.; Settimo, M.; Shadkam, A.; Shellard, R. C.; Sigl, G.; Silli, G.; Sima, O.; Smiaikowski, A.; Smida, R.; Snow, G. R.; Sommers, P.; Sonntag, S.; Sorokin, J.; Squartini, R.; Stanca, D.; Stanic, S.; Stasielak, J.; Strafella, F.; Suarez, F.; Suarez Duran, M.; Sudholz, T.; Suomijarvi, T.; Supanitsky, A. D.; Sutherland, M. S.; Swain, J.; Szadkowski, Z.; Taborda, O. A.; Tapia, A.; Tepe, A.; Theodoro, V. M.; Timmermans, C.; Todero Peixoto, C. J.; Tomankova, L.; Tome, B.; Tonachini, A.; Torralba Elipe, G.; Torres Machado, D.; Torri, M.; Travnicek, P.; Trini, M.; Ulrich, R.; Unger, M.; Urban, M.; Valbuena-Delgado, A.; Valdes Galicia, J. F.; Valino, I.; Valore, L.; van Aar, G.; van Bodegom, P.; van den Berg, A. M.; van Vliet, A.; Varela, E.; Vargas Cardenas, B.; Varner, G.; Vazquez, J. R.; Vazquez, R. A.; Veberic, D.; Verzi, V.; Vicha, J.; Villasenor, L.; Vorobiov, S.; Wahlberg, H.; Wainberg, O.; Walz, D.; Watson, A. A.; Weber, M.; Weindl, A.; Wiencke, L.; Wilczynski, H.; Winchen, T.; Wittkowski, D.; Wundheiler, B.; Wykes, S.; Yang, L.; Yelos, D.; Yushkov, A.; Zas, E.; Zavrtanik, D.; Zavrtanik, M.; Zepeda, A.; Zimmermann, B.; Ziolkowski, M.; Zong, Z.; Zuccarello, F.; collaboration, Pierre Auger

AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov

Evaluation of the potential for reduction in well spacing of the Bakken sand pool, Court Field

Energy Technology Data Exchange (ETDEWEB)

Majcher, M.B.; Estrada, C.A. [Society of Petroleum Engineers, Richardson, TX (United States)]|[Nexen Inc., Calgary, AB (Canada); Archer, J.C. [Nexen Inc., Calgary, AB (Canada)

2005-11-01

For the past 15 years, the Court field has produced hydrocarbons from the Mississippian/Devonian middle Bakken sandstone reservoir. The formation is located in west central Saskatchewan and was deposited in a marine shelf environment and later reworked into tidally influenced sand ridges. Vertical wells and a waterflood recovery scheme have been used to produce heavy crude with an API gravity of 17. A better understanding of the reservoir behaviour is required in order to advance field development and maintain successful waterflood management. Three-dimensional seismic and well logs were used to map the structural complexity of the sand ridge. This study examined the feasibility of using production and seismic data to update and substantiate a simulation model which was used to evaluate downspace potential. Stratigraphic disparities were taken into account as discontinuous interbedded siltstones may be flow barriers that create anisotropy in the permeability zone. Grid orientation was altered to align axially with the permeability trends of the main sand ridge. This study also reviewed an earlier field simulation and generated an updated model. The potential to reduce well spacing was then identified and waterflood optimization of the middle Bakken reservoir was evaluated. It was concluded that the edges of the sand ridge and areas isolated from existing injectors have the greatest potential for infill drilling and additional water injection because of the high sinkhole density. It was noted that drilling edge regions with high oil saturations have a risk of low permeability zones, resulting in low production rates and the possibility of an ineffective waterflood scheme. Therefore, a successful waterflood in the edge zones would require injector-producer pairs in the equivalent sand facies. 4 refs., 36 figs.

Mechanism of selective ion flotation. 1. Selective flotation of transition metal cations

International Nuclear Information System (INIS)

Walkowiak, W.

1991-01-01

An experimental investigation is presented of the batch ion flotation of the transition metal cations Cr 3+ , Fe 3+ , Mn 2+ , Co 2+ , Zn 2+ , Ag + , Cd 2+ , and In 3+ from acidic aqueous solutions with sodium dodecylsulfonate and sodium dodecylbenzenesulfonate as anionic surfactants. The selectivity sequences Mn 2+ 2+ 2+ 3+ 3+ and Ag + 2+ 3+ are established, both from data for single and multi-ion metal cations solutions, where sublate was not formed in the bulk solution. Good agreement between the selectivity sequences and the values of ionic potential of metal cations was found. An experimental investigation was also performed on the solubility of sublates. The sublates solubility values are discussed in terms of ionic potentials of metal cations as well as of the surfactant size

The personal interview: assessing the potential for personality similarity to bias the selection of orthopaedic residents.

Science.gov (United States)

Quintero, Andres J; Segal, Lee S; King, Tonya S; Black, Kevin P

2009-10-01

The selection of medical students for training in orthopaedic surgery consists of an objective screening of cognitive skills to secure interviews for the brightest candidates, followed by subjective measures of candidates to confirm whether applicants are worthy of further consideration. The personal interview and its potential biased impact on the orthopaedic workforce were evaluated. During 2004-2006 at the Penn State College of Medicine, the authors performed a prospective cohort study in which 30 consenting interviewers and 135 interviewees completed the Myers-Briggs Type Indicator before the interviews. Completed surveys were evaluated after submitting the resident selection list to the National Residency Matching Program, and candidate rankings based solely on the personal interview were analyzed. Clinicians ranked candidates more favorably when they shared certain personality preferences (P = .044) and when they shared the preference groupings of the quadrant extrovert-sensing and either the function pair sensing-thinking (P = .007) or the temperament sensing-judging (P = .003), or the function pair sensing-feeling and the temperament sensing-judging (P = .029). No associations existed between personality preferences and interviewee rankings performed by basic scientists and resident interviewers. The results support the hypothesis that, within the department studied, there was a significant association between similarities in personality type and the rankings that individual faculty interviewers assigned to applicants at the completion of each interview session. The authors believe that it is important for the faculty member to recognize that this tendency exists. Finally, promoting diversity within the admission committee may foster a diverse resident body and orthopaedic workforce.

Insights from event-related potentials into the temporal and hierarchical organization of the ventral and dorsal streams of the visual system in selective attention.

Science.gov (United States)

Martín-Loeches, M; Hinojosa, J A; Rubia, F J

1999-11-01

The temporal and hierarchical relationships between the dorsal and the ventral streams in selective attention are known only in relation to the use of spatial location as the attentional cue mediated by the dorsal stream. To improve this state of affairs, event-related brain potentials were recorded while subjects attended simultaneously to motion direction (mediated by the dorsal stream) and to a property mediated by the ventral stream (color or shape). At about the same time, a selection positivity (SP) started for attention mediated by both streams. However, the SP for color and shape peaked about 60 ms later than motion SP. Subsequently, a selection negativity (SN) followed by a late positive component (LPC) were found simultaneously for attention mediated by both streams. A hierarchical relationship between the two streams was not observed, but neither SN nor LPC for one property was completely insensitive to the values of the other property.

Ion-selective electrodes

CERN Document Server

Mikhelson, Konstantin N

2013-01-01

Ion-selective electrodes (ISEs) have a wide range of applications in clinical, environmental, food and pharmaceutical analysis as well as further uses in chemistry and life sciences. Based on his profound experience as a researcher in ISEs and a course instructor, the author summarizes current knowledge for advanced teaching and training purposes with a particular focus on ionophore-based ISEs. Coverage includes the basics of measuring with ISEs, essential membrane potential theory and a comprehensive overview of the various classes of ion-selective electrodes. The principles of constructing I

Glass and Glass-Ceramic Materials from Simulated Composition of Lunar and Martian Soils: Selected Properties and Potential Applications

Science.gov (United States)

Ray, C. S.; Sen, S.; Reis, S. T.; Kim, C. W.

2005-01-01

In-situ resource processing and utilization on planetary bodies is an important and integral part of NASA's space exploration program. Within this scope and context, our general effort is primarily aimed at developing glass and glass-ceramic type materials using lunar and martian soils, and exploring various applications of these materials for planetary surface operations. Our preliminary work to date have demonstrated that glasses can be successfully prepared from melts of the simulated composition of both lunar and martian soils, and the melts have a viscosity-temperature window appropriate for drawing continuous glass fibers. The glasses are shown to have the potential for immobilizing certain types of nuclear wastes without deteriorating their chemical durability and thermal stability. This has a direct impact on successfully and economically disposing nuclear waste generated from a nuclear power plant on a planetary surface. In addition, these materials display characteristics that can be manipulated using appropriate processing protocols to develop glassy or glass-ceramic magnets. Also discussed in this presentation are other potential applications along with a few selected thermal, chemical, and structural properties as evaluated up to this time for these materials.

Bio-accessibility and Risk of Exposure to Metals and SVOCs in Artificial Turf Field Fill Materials and Fibers

Science.gov (United States)

Pavilonis, Brian T.; Weisel, Clifford P.; Buckley, Brian; Lioy, Paul J.

2014-01-01

To reduce maintenance costs, municipalities and schools are starting to replace natural grass fields with a new generation synthetic turf. Unlike Astro-Turf, which was first introduced in the 1960’s, synthetic field turf provides more cushioning to athletes. Part of this cushioning comes from materials like crumb rubber infill, which is manufactured from recycled tires and may contain a variety of chemicals. The goal of this study was to evaluate potential exposures from playing on artificial turf fields and associated risks to trace metals, semivolatile organic compounds (SVOCs), and polycyclic aromatic hydrocarbons (PAHs) by examining typical artificial turf fibers (n=8), different types of infill (n=8), and samples from actual fields (n=7). Three artificial biofluids were prepared which included: lung, sweat, and digestive fluids. Artificial biofluids were hypothesized to yield a more representative estimation of dose than the levels obtained from total extraction methods. PAHs were routinely below the limit of detection across all three biofluids precluding completion of a meaningful risk assessment. No SVOCs were identified at quantifiable levels in any extracts based on a match of their mass spectrum to compounds that are regulated in soil. The metals were measurable but at concentrations for which human health risk was estimated to be low. The study demonstrated that for the products and fields we tested, exposure to infill and artificial turf was generally considered de minimus, with the possible exception of lead for some fields and materials. PMID:23758133

Selective silicification of Thalassinoides and other biogenic structures in marine platform limestones and hardground (Lower Albian, Sonabia, Cantabria

Directory of Open Access Journals (Sweden)

M. A. Bustillo

2017-06-01

Full Text Available In this work different types of chert from the Oriñón Limestone Formation (upper Aptian-lower Albian are studied. This formation outcrops in the eastern coast of Cantabria (Liendo-Castro Urdiales area and includes outstanding and abundant cherty nodules, lenticular layers and crusts. The host rock is mainly a biocalcarenite (wackestone/packstone of pellets, echinoids fragments, oysters, foraminifers and calcareous or calcified siliceous sponge spicules. The Oriñón Limestone Formation was deposited in a marine open-shelf environment and preserves a hardground of regional extent with particular chert crusts. The silica source is associated to the dissolution of siliceous sponge spicules or to their calcification. Most of the chert is constituted by mosaics of micro-cryptocrystalline quartz and calcedonite, and it is generated by the selective silicification of biogenic structures, mainly dwelling trace fossils (Thalassinoides isp. because of the higher amount of organic matter and the higher porosity and permeability of the burrow infill. In the hardground, selective silicification affects body fossils such as belemnites, oysters and echinoids, and trace fossils (feeding burrows and borings where in addition cherts is accumulated as an indeterminate crust. The silicification of the biogenic structures firstly occurred in form of opaline phases during the early diagenesis while the oxidation of the organic matter was active. Thus, Thalassinoides trace fossils affected by silicification preserve filaments and cocoids that might have had a microbial origin. Neoformation of dolomite and calcite occur only within the Thalassinoides trace fossils which indicates that diagenetic processes taking place within these burrows differed from those affecting the host rock and other biogenic structures. Dwelling trace fossils would have supposed a close micro-environment where the oxidation conditions changed from high to low rate.

A method for selecting potential geosites. The case of glacial geosites in the Chablais area (French and Swiss Prealps)

Science.gov (United States)

Perret, Amandine; Reynard, Emmanuel

2014-05-01

Since 2009, an Interreg IVA project (123 Chablais), dealing with the promotion of natural and cultural heritage in the Chablais area, has been developed. It is linked to the creation of the Chablais Geopark. In a context of development of smart forms of tourism, the objective was to develop a strategy promoting the glacial heritage to a wide public in an area where the glaciers have almost disappeared. The recognition of specific places as geoheritage is the result of a double process: a scientific one, based on more or less sophisticated methods, and a social one, that is the acknowledgment by the society. One of the first scientific tasks is to produce a list of "potential geosites" that will be assessed in more details. However, this selection is often a weak point of inventories. It often seems like a "black box" without any transparency. In this project (123 Chablais) we carried out an inventory of glacial geosites, using the method developed by Reynard et al. (2007, 2012). However, a method has been created to enlighten the selection process, and to enhance choices in geoheritage management. As it was not possible to consider all sites in the Chablais area, a mixed selection approach was developed, halfway between completeness and specificity (Martin, 2012). The first step was the creation of a list of "points of interest", established using different sources: literature review, fieldwork and use of GIS to cross information. A selection was then performed according to two criteria: correspondence with a glacial stage (time axis) and belonging to a type of forms (spatial axis). Finally, selected sites aimed at providing a representative overview of the regional glacial witnesses. Therefore, representative sites of the regional geology were selected as well as sites presenting regional peculiarities Temporal and spatial attributes were given to the 101 points of interest identified. From a temporal point of view, this inventory aimed at presenting the main

Intrinsic Immunomodulatory Effects of Low-Digestible Carbohydrates Selectively Extend Their Anti-Inflammatory Prebiotic Potentials

Directory of Open Access Journals (Sweden)

Jérôme Breton

2015-01-01

Full Text Available The beneficial effects of carbohydrate-derived fibers are mainly attributed to modulation of the microbiota, increased colonic fermentation, and the production of short-chain fatty acids. We studied the direct immune responses to alimentary fibers in in vitro and in vivo models. Firstly, we evaluated the immunomodulation induced by nine different types of low-digestible fibers on human peripheral blood mononuclear cells. None of the fibers tested induced cytokine production in baseline conditions. However, only one from all fibers almost completely inhibited the production of anti- and proinflammatory cytokines induced by bacteria. Secondly, the impact of short- (five days and long-term (three weeks oral treatments with selected fibers was assessed in the trinitrobenzene-sulfonic acid colitis model in mice. The immunosuppressive fiber significantly reduced levels of inflammatory markers over both treatment periods, whereas a nonimmunomodulatory fiber had no effect. The two fibers did not differ in terms of the observed fermentation products and colonic microbiota after three weeks of treatment, suggesting that the anti-inflammatory action was not related to prebiotic properties. Hence, we observed a direct effect of a specific fiber on the murine immune system. This intrinsic, fiber-dependent immunomodulatory potential may extend prebiotic-mediated protection in inflammatory bowel disease.

GIS-based identification of areas that have resource potential for critical minerals in six selected groups of deposit types in Alaska

Science.gov (United States)

Karl, Susan M.; Jones, James V.; Hayes, Timothy S.

2016-11-16

Alaska has considerable potential for undiscovered mineral resources. This report evaluates potential for undiscovered critical minerals in Alaska. Critical minerals are those for which the United States imports more than half of its total supply and which are largely derived from nations that cannot be considered reliable trading partners. In this report, estimated resource potential and certainty for the state of Alaska are analyzed and mapped for the following six selected mineral deposit groups that may contain one or more critical minerals: (1) rare earth elements-thorium-yttrium-niobium(-uranium-zirconium) [REE-Th-Y-Nb(-U-Zr)] deposits associated with peralkaline to carbonatitic igneous intrusive rocks; (2) placer and paleoplacer gold (Au) deposits that in some places might also produce platinum group elements (PGE), chromium (Cr), tin (Sn), tungsten (W), silver (Ag), or titanium (Ti); (3) platinum group elements(-cobalt-chromium-nickel-titanium-vanadium) [PGE(-Co-Cr-Ni-Ti-V)] deposits associated with mafic to ultramafic intrusive rocks; (4) carbonate-hosted copper(-cobalt-silver-germanium-gallium) [Cu(-Co-Ag-Ge-Ga)] deposits; (5) sandstone-hosted uranium(-vanadium-copper) [U(-V-Cu)] deposits; and (6) tin-tungsten-molybdenum(-tantalum-indium-fluorspar) [Sn-W-Mo(-Ta-In-fluorspar)] deposits associated with specialized granites.This study used a data-driven, geographic information system (GIS)-implemented method to identify areas that have mineral resource potential in Alaska. This method systematically and simultaneously analyzes geoscience data from multiple geospatially referenced datasets and uses individual subwatersheds (12-digit hydrologic units) as the spatial unit of classification. The final map output uses a red, yellow, green, and gray color scheme to portray estimated relative potential (High, Medium, Low, Unknown) for each of the six groups of mineral deposit types, and it indicates the relative certainty (High, Medium, Low) of that estimate for

Selection of Lactic Acid Bacteria with Probiotic Potential Isolated from the Fermentation Process of "Cupuaçu" (Theobroma grandiflorum).

Science.gov (United States)

Ornellas, Roberta Maria Santos; Santos, Tiza Teles; Arcucio, Leonardo Borges; Sandes, Sávio Henrique Cicco; Oliveira, Mayara Messias; Dias, Cristiano Villela; de Carvalho Silva, Samuel; Uetanabaro, Ana Paula Trovatti; Vinderola, Gabriel; Nicoli, Jacques Robert

2017-01-01

In the present study, nine lactic acid bacteria isolated from the fermentation process of "cupuaçu" (Theobroma grandiflorum) were selected for probiotic use. In vitro (resistance to gastrointestinal environment, in vitro antagonism and co-aggregation with pathogens) and in vivo (intestinal colonization and ex vivo antagonism in germ-free mice, cumulative mortality, translocation to liver and spleen, histopathological examination of liver and ileum and mRNA cytokine gene expression during an experimental infection with S. Typhimurium) assays were used. Among the nine Lactobacillus strains isolated from the "cupuaçu" fermentation, L. plantarum 81 and L. plantarum 90 were selected as potential probiotics based on better results obtained in in vitro evaluations (production of diffusible inhibitory compounds and co-aggregation) as well as in vivo experiments (resistance to gastrointestinal environment, ex vivo antagonism, higher survival after enteropathogen challenge, lower hepatic translocation of enteropathogen, lower histopathological lesions in ileum and liver and anti-inflammatory pattern of immunological response). Concluding, L. plantarum 81 and L. plantarum 90 showed in vitro and in vivo capacities for probiotic use through different mechanisms of protection and its origin would allow an easier adaptation in an alimentary matrix for its administration.

Potential Selection Effects when Estimating Associations Between the Infancy Peak or Adiposity Rebound and Later Body Mass Index in Children

DEFF Research Database (Denmark)

Börnhorst, Claudia; Siani, Alfonso; Tornaritis, Michalis

2017-01-01

Introduction:This study aims to evaluate a potential selection effect caused by exclusion of children with non-identifiable infancy peak (IP) and adiposity rebound (AR) when estimating associations between age and BMI at IP and AR and later weight status. Subjects and methods: In 4 744 children.......98). In the total study group, BMI values in infancy and childhood were positively associated with later BMI z-scores where associations increased with age. Associations between BMI velocities and later BMI z-scores were largest at ages 5 and 6. Results differed for children with non-identifiable IP and AR...

On the Critical Role of Divergent Selection in Evolvability

Directory of Open Access Journals (Sweden)

Joel Lehman

2016-08-01

Full Text Available An ambitious goal in evolutionary robotics is to evolve increasingly complex robotic behaviors with minimal human design effort. Reaching this goal requires evolutionary algorithms that can unlock from genetic encodings their latent potential for evolvability. One issue clouding this goal is conceptual confusion about evolvability, which often obscures the aspects of evolvability that are important or desirable. The danger from such confusion is that it may establish unrealistic goals for evolvability that prove unproductive in practice. An important issue separate from conceptual confusion is the common misalignment between selection and evolvability in evolutionary robotics. While more expressive encodings can represent higher-level adaptations (e.g. sexual reproduction or developmental systems that increase long-term evolutionary potential (i.e. evolvability, realizing such potential requires gradients of fitness and evolvability to align. In other words, selection is often a critical factor limiting increasing evolvability. Thus, drawing from a series of recent papers, this article seeks to both (1 clarify and focus the ways in which the term evolvability is used within artificial evolution, and (2 argue for the importance of one type of selection, i.e. divergent selection, for enabling evolvability. The main argument is that there is a fundamental connection between divergent selection and evolvability (on both the individual and population level that does not hold for typical goal-oriented selection. The conclusion is that selection pressure plays a critical role in realizing the potential for evolvability, and that divergent selection in particular provides a principled mechanism for encouraging evolvability in artificial evolution.

A model expansion criterion for treating surface topography in ray path calculations using the eikonal equation

International Nuclear Information System (INIS)

Ma, Ting; Zhang, Zhongjie

2014-01-01

Irregular surface topography has revolutionized how seismic traveltime is calculated and the data are processed. There are two main schemes for dealing with an irregular surface in the seismic first-arrival traveltime calculation: (1) expanding the model and (2) flattening the surface irregularities. In the first scheme, a notional infill medium is added above the surface to expand the physical space into a regular space, as required by the eikonal equation solver. Here, we evaluate the chosen propagation velocity in the infill medium through ray path tracking with the eikonal equation-solved traveltime field, and observe that the ray paths will be physically unrealistic for some values of this propagation velocity. The choice of a suitable propagation velocity in the infill medium is crucial for seismic processing of irregular topography. Our model expansion criterion for dealing with surface topography in the calculation of traveltime and ray paths using the eikonal equation highlights the importance of both the propagation velocity of the infill physical medium and the topography gradient. (paper)

Lines of Descent Under Selection

Science.gov (United States)

Baake, Ellen; Wakolbinger, Anton

2017-11-01

We review recent progress on ancestral processes related to mutation-selection models, both in the deterministic and the stochastic setting. We mainly rely on two concepts, namely, the killed ancestral selection graph and the pruned lookdown ancestral selection graph. The killed ancestral selection graph gives a representation of the type of a random individual from a stationary population, based upon the individual's potential ancestry back until the mutations that define the individual's type. The pruned lookdown ancestral selection graph allows one to trace the ancestry of individuals from a stationary distribution back into the distant past, thus leading to the stationary distribution of ancestral types. We illustrate the results by applying them to a prototype model for the error threshold phenomenon.

Opportunity for natural selection among some selected population groups of Northeast India

Science.gov (United States)

Das, Farida Ahmed; Mithun, Sikdar

2010-01-01

BACKGROUND: Selection potential based on differential fertility and mortality has been computed for seven population groups inhabiting different geographical locations of Northeast India. MATERIALS AND METHODS: Crow’s as well as Johnston and Kensinger’s index have been used for the present purpose. RESULTS AND CONCLUSION: Irrespective of the methodology, the total index of selection was found to be highest among the Deoris followed by the Kaibartas. The lowest selection index was found among the Oraon population. If the relative contribution of fertility and mortality components to the total index is considered to be multiplicative, it is observed that in all these communities the fertility component exceeds that of mortality component, which may indicate initiation of demographic transitional phase in the selected populations with the betterment of healthcare and socioeconomic condition within the last few decades. PMID:21031053

Analysis of the Effect of Osteon Diameter on the Potential Relationship of Osteocyte Lacuna Density and Osteon Wall Thickness

Science.gov (United States)

Skedros, John G.; Clark, Gunnar C.; Sorenson, Scott M.; Taylor, Kevin W.; Qiu, Shijing

2011-01-01

An important hypothesis is that the degree of infilling of secondary osteons (Haversian systems) is controlled by the inhibitory effect of osteocytes on osteoblasts, which might be mediated by sclerostin (a glycoprotein produced by osteocytes). Consequently, this inhibition could be proportional to cell number: relatively greater repression is exerted by progressively greater osteocyte density (increased osteocytes correlate with thinner osteon walls). This hypothesis has been examined, but only weakly supported, in sheep ulnae. We looked for this inverse relationship between osteon wall thickness (On.W.Th) and osteocyte lacuna density (Ot.Lc.N/B.Ar) in small and large osteons in human ribs, calcanei of sheep, deer, elk, and horses, and radii and third metacarpals of horses. Analyses involved: (1) all osteons, (2) smaller osteons, either ≤150μm diameter or ≤ the mean diameter, and (3) larger osteons (>mean diameter). Significant, but weak, correlations between Ot.Lc.N/B.Ar and On.W.Th/On.Dm (On.Dm = osteon diameter) were found when considering all osteons in limb bones (r values −0.16 to −0.40, psheep ulnae: r= −0.39, pbone types) or very weak (two/seven bone types). In ribs, a negative relationship was only found in smaller osteons (r= −0.228, p<0.01); this inverse relationship in smaller osteons did not occur in elk calcanei. These results do not provide clear or consistent support for the hypothesized inverse relationship. However, correlation analyses may fail to detect osteocyte-based repression of infilling if the signal is spatially non-uniform (e.g., increased near the central canal). PMID:21809466

Ion-selective electrodes

Energy Technology Data Exchange (ETDEWEB)

Mikhelson, Konstantin N. [St. Petersburg State Univ. (Russian Federation). Ion-Selective Electrode Laboratory

2013-06-01

Ion-selective electrodes (ISEs) have a wide range of applications in clinical, environmental, food and pharmaceutical analysis as well as further uses in chemistry and life sciences. Based on his profound experience as a researcher in ISEs and a course instructor, the author summarizes current knowledge for advanced teaching and training purposes with a particular focus on ionophore-based ISEs. Coverage includes the basics of measuring with ISEs, essential membrane potential theory and a comprehensive overview of the various classes of ion-selective electrodes. The principles of constructing ISEs are outlined, and the transfer of methods into routine analysis is considered.

EEG Channel Selection Using Particle Swarm Optimization for the Classification of Auditory Event-Related Potentials

Directory of Open Access Journals (Sweden)

Alejandro Gonzalez

2014-01-01

Full Text Available Brain-machine interfaces (BMI rely on the accurate classification of event-related potentials (ERPs and their performance greatly depends on the appropriate selection of classifier parameters and features from dense-array electroencephalography (EEG signals. Moreover, in order to achieve a portable and more compact BMI for practical applications, it is also desirable to use a system capable of accurate classification using information from as few EEG channels as possible. In the present work, we propose a method for classifying P300 ERPs using a combination of Fisher Discriminant Analysis (FDA and a multiobjective hybrid real-binary Particle Swarm Optimization (MHPSO algorithm. Specifically, the algorithm searches for the set of EEG channels and classifier parameters that simultaneously maximize the classification accuracy and minimize the number of used channels. The performance of the method is assessed through offline analyses on datasets of auditory ERPs from sound discrimination experiments. The proposed method achieved a higher classification accuracy than that achieved by traditional methods while also using fewer channels. It was also found that the number of channels used for classification can be significantly reduced without greatly compromising the classification accuracy.

Potential self-selection bias in a nested case-control study on indoor environmental factors and their association with asthma and allergic symptoms among pre-school children

DEFF Research Database (Denmark)

Bornehag, Carl-Gustaf; Sundell, Jan; Sigsgaard, T.

2006-01-01

, including health, building characteristics of the home, and socioeconomic factors between participating and non-participating families in a nested case-control study on asthma and allergy among children. Information was collected in a baseline questionnaire to the parents of 14,077 children aged 1-6 years...... in a first step. In a second step 2,156 of the children were invited to participate in a case-control study. Of these, 198 cases and 202 controls were finally selected. For identifying potential selection bias, information concerning all invited families in the case-control study was obtained from...

Uruguay; 2011 Selected Issues

OpenAIRE

International Monetary Fund

2011-01-01

This 2011 Article IV Consultation—Selected Issues paper focuses on estimating potential output and the output gap and spillovers from agriculture in the case of Uruguay. It introduces additional economic information and theory to estimate potential output, shedding some light on the discussion of current monetary and fiscal policies. The objective is to take advantage of economic data to disentangle the most recent economic performance by introducing multivariate techniques. The paper also pr...

Immigration And Self-Selection

OpenAIRE

George J. Borjas

1988-01-01

Self-selection plays a dominant role in determining the size and composition of immigrant flows. The United States competes with other potential host countries in the "immigration market". Host countries vary in their "offers" of economic opportunities and also differ in the way they ration entry through their immigration policies. Potential immigrants compare the various opportunities and are non-randomly sorted by the immigration market among the various host countries. This paper presents ...

Evaluation of genomic selection for replacement strategies using selection index theory.

Science.gov (United States)

Calus, M P L; Bijma, P; Veerkamp, R F

2015-09-01

semen increased the potential benefit of using GS, because it increased the room for selection. Critical assumptions that should not be ignored when calculating the benefit of GS are (1) a decrease in replacement rate can only be achieved by increasing productive life in the herd, and (2) accuracies of selection should be used rather than accuracies of estimated breeding values based on the prediction error variance and base-generation genetic variance, because the latter lead to underestimation of the potential of GS. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Robust determination of the chemical potential in the pole expansion and selected inversion method for solving Kohn-Sham density functional theory

Science.gov (United States)

Jia, Weile; Lin, Lin

2017-10-01

Fermi operator expansion (FOE) methods are powerful alternatives to diagonalization type methods for solving Kohn-Sham density functional theory (KSDFT). One example is the pole expansion and selected inversion (PEXSI) method, which approximates the Fermi operator by rational matrix functions and reduces the computational complexity to at most quadratic scaling for solving KSDFT. Unlike diagonalization type methods, the chemical potential often cannot be directly read off from the result of a single step of evaluation of the Fermi operator. Hence multiple evaluations are needed to be sequentially performed to compute the chemical potential to ensure the correct number of electrons within a given tolerance. This hinders the performance of FOE methods in practice. In this paper, we develop an efficient and robust strategy to determine the chemical potential in the context of the PEXSI method. The main idea of the new method is not to find the exact chemical potential at each self-consistent-field (SCF) iteration but to dynamically and rigorously update the upper and lower bounds for the true chemical potential, so that the chemical potential reaches its convergence along the SCF iteration. Instead of evaluating the Fermi operator for multiple times sequentially, our method uses a two-level strategy that evaluates the Fermi operators in parallel. In the regime of full parallelization, the wall clock time of each SCF iteration is always close to the time for one single evaluation of the Fermi operator, even when the initial guess is far away from the converged solution. We demonstrate the effectiveness of the new method using examples with metallic and insulating characters, as well as results from ab initio molecular dynamics.

Species selection for smallholder aquaculture

OpenAIRE

Brummett, R.E.

1996-01-01

Systems for selection of species for smallholder aquaculture are presented. These are: food fits; management decisions; and economic criteria. Food fits suggests categorizing pond food resources into a few categories based loosely on the instrinsic traits of food which effect their selectivity by predators. Using management decision techniques, potential polycultures might also be compared with each other and with monoculture. Under economic criteria (and for species known in local markets), ...

Development and optimization of a cell-based assay for the selection of synthetic compounds that potentiate bone morphogenetic protein-2 activity.

Science.gov (United States)

Okada, Motohiro; Sangadala, Sreedhara; Liu, Yunshan; Yoshida, Munehito; Reddy, Boojala Vijay B; Titus, Louisa; Boden, Scott D

2009-12-01

reliability of our cell-based assay. Direct delivery of synthesized protein can be limited by high cost, instability or inadequate post-translational modifications. Thus, there would be a clear benefit for a low cost, cell penetrable chemical compound. We successfully used our gene expression-based assay to choose an active compound from a select group of compounds that were identified by computational screenings as the most likely candidates for mimicking the function of LMP-1. Among them, we selected SVAK-3, a compound that showed a dose-dependent potentiation of BMP-2 activity in inducing osteoblastic differentiation of C2C12 cells. We show that either the full length LMP-1 protein or its potential mimetic compound consistently exhibit similar potentiation of BMP-2 activity even when multiple markers of the osteoblastic phenotype were parallely monitored.

In Vitro and in Vivo Selection of Potentially Probiotic Lactobacilli From Nocellara del Belice Table Olives

Directory of Open Access Journals (Sweden)

Barbara Guantario

2018-03-01

Full Text Available Table olives are increasingly recognized as a vehicle as well as a source of probiotic bacteria, especially those fermented with traditional procedures based on the activity of indigenous microbial consortia, originating from local environments. In the present study, we report characterization at the species level of 49 Lactic Acid Bacteria (LAB strains deriving from Nocellara del Belice table olives fermented with the Spanish or Castelvetrano methods, recently isolated in our previous work. Ribosomal 16S DNA analysis allowed identification of 4 Enterococcus gallinarum, 3 E. casseliflavus, 14 Leuconostoc mesenteroides, 19 Lactobacillus pentosus, 7 L. coryniformis, and 2 L. oligofermentans. The L. pentosus and L. coryniformis strains were subjected to further screening to evaluate their probiotic potential, using a combination of in vitro and in vivo approaches. The majority of them showed high survival rates under in vitro simulated gastro-intestinal conditions, and positive antimicrobial activity against Salmonella enterica serovar Typhimurium, Listeria monocytogenes and enterotoxigenic Escherichia coli (ETEC pathogens. Evaluation of antibiotic resistance to ampicillin, tetracycline, chloramphenicol, or erythromycin was also performed for all selected strains. Three L. coryniformis strains were selected as very good performers in the initial in vitro testing screens, they were antibiotic susceptible, as well as capable of inhibiting pathogen growth in vitro. Parallel screening employing the simplified model organism Caenorhabditis elegans, fed the Lactobacillus strains as a food source, revealed that one L. pentosus and one L. coryniformis strains significantly induced prolongevity effects and protection from pathogen-mediated infection. Moreover, both strains displayed adhesion to human intestinal epithelial Caco-2 cells and were able to outcompete foodborne pathogens for cell adhesion. Overall, these results are suggestive of beneficial

Potential biochemical markers for selection of disease resistance in Vigna radiata

International Nuclear Information System (INIS)

Badere, R.S.; Koche, D.K.; Choudhary, A.D.; Pawar, S.E.

2001-01-01

The Vigna radiata (L.) Wilczek (Green gram), a major pulse crop is prone to damaging diseases caused by Erysiphe polygoni, Cercospora canescens and Rhizoctonia sp. Therefore, the development of multiple resistance is a major breeding objective in green gram. Resistance to powdery mildew has already been developed, however, there are no reports on the development of resistance to Cercospora in green gram. Owing to limitation of conventional screening methods, the improvement for multiple disease resistance is inadequate, in this crop. It needs an efficient and quick selection method, for screening the plant population at an early stage. It is well established that the resistant interaction, in plants, involves accumulation of antibiotic compound phytoalexin (Genestein in Vigna radiata) and induction of enzymes such as β-1,3 gulcanase and Chitinases. These compounds are not only induced by pathogens but also pathogen-derived elicitors. These biochemical compounds can be used as resistance indicative biochemical markers for screening the natural or mutagen induced genetic diversity in populations of Vigna radiata in non-destructive manner. It, however, needs a systematic study of plant defense response. This paper deals with the response of resistant and susceptible cultivars of vigna radiata to Cercospora elicitor and development of non-destructive selection method for disease resistance. (author)

Muon counting using silicon photomultipliers in the AMIGA detector of the Pierre Auger observatory

Science.gov (United States)

Aab, A.; Abreu, P.; Aglietta, M.; Ahn, E. J.; Samarai, I. Al; Albuquerque, I. F. M.; Allekotte, I.; Allison, P.; Almela, A.; Alvarez Castillo, J.; Alvarez-Muñiz, J.; Ambrosio, M.; Anastasi, G. A.; Anchordoqui, L.; Andrada, B.; Andringa, S.; Aramo, C.; Arqueros, F.; Arsene, N.; Asorey, H.; Assis, P.; Aublin, J.; Avila, G.; Badescu, A. M.; Balaceanu, A.; Baus, C.; Beatty, J. J.; Becker, K. H.; Bellido, J. A.; Berat, C.; Bertaina, M. E.; Bertou, X.; Biermann, P. L.; Billoir, P.; Biteau, J.; Blaess, S. G.; Blanco, A.; Blazek, J.; Bleve, C.; Boháčová, M.; Boncioli, D.; Bonifazi, C.; Borodai, N.; Botti, A. M.; Brack, J.; Brancus, I.; Bretz, T.; Bridgeman, A.; Briechle, F. L.; Buchholz, P.; Bueno, A.; Buitink, S.; Buscemi, M.; Caballero-Mora, K. S.; Caccianiga, B.; Caccianiga, L.; Cancio, A.; Canfora, F.; Caramete, L.; Caruso, R.; Castellina, A.; Cataldi, G.; Cazon, L.; Cester, R.; Chavez, A. G.; Chiavassa, A.; Chinellato, J. A.; Chudoba, J.; Clay, R. W.; Colalillo, R.; Coleman, A.; Collica, L.; Coluccia, M. R.; Conceição, R.; Contreras, F.; Cooper, M. J.; Coutu, S.; Covault, C. E.; Cronin, J.; Dallier, R.; D'Amico, S.; Daniel, B.; Dasso, S.; Daumiller, K.; Dawson, B. R.; de Almeida, R. M.; de Jong, S. J.; De Mauro, G.; de Mello Neto, J. R. T.; De Mitri, I.; de Oliveira, J.; de Souza, V.; Debatin, J.; del Peral, L.; Deligny, O.; Di Giulio, C.; Di Matteo, A.; Díaz Castro, M. L.; Diogo, F.; Dobrigkeit, C.; D'Olivo, J. C.; Dorofeev, A.; dos Anjos, R. C.; Dova, M. T.; Dundovic, A.; Ebr, J.; Engel, R.; Erdmann, M.; Erfani, M.; Escobar, C. O.; Espadanal, J.; Etchegoyen, A.; Falcke, H.; Fang, K.; Farrar, G.; Fauth, A. C.; Fazzini, N.; Fick, B.; Figueira, J. M.; Filevich, A.; Filipčič, A.; Fratu, O.; Freire, M. M.; Fujii, T.; Fuster, A.; García, B.; Garcia-Pinto, D.; Gaté, F.; Gemmeke, H.; Gherghel-Lascu, A.; Ghia, P. L.; Giaccari, U.; Giammarchi, M.; Giller, M.; Głas, D.; Glaser, C.; Glass, H.; Golup, G.; Gómez Berisso, M.; Gómez Vitale, P. F.; González, N.; Gookin, B.; Gordon, J.; Gorgi, A.; Gorham, P.; Gouffon, P.; Grillo, A. F.; Grubb, T. D.; Guarino, F.; Guedes, G. P.; Hampel, M. R.; Hansen, P.; Harari, D.; Harrison, T. A.; Harton, J. L.; Hasankiadeh, Q.; Haungs, A.; Hebbeker, T.; Heck, D.; Heimann, P.; Herve, A. E.; Hill, G. C.; Hojvat, C.; Holt, E.; Homola, P.; Hörandel, J. R.; Horvath, P.; Hrabovský, M.; Huege, T.; Hulsman, J.; Insolia, A.; Isar, P. G.; Jandt, I.; Jansen, S.; Johnsen, J. A.; Josebachuili, M.; Kääpä, A.; Kambeitz, O.; Kampert, K. H.; Kasper, P.; Katkov, I.; Keilhauer, B.; Kemp, E.; Kieckhafer, R. M.; Klages, H. O.; Kleifges, M.; Kleinfeller, J.; Krause, R.; Krohm, N.; Kuempel, D.; Kukec Mezek, G.; Kunka, N.; Kuotb Awad, A.; LaHurd, D.; Latronico, L.; Lauscher, M.; Lebrun, P.; Legumina, R.; Leigui de Oliveira, M. A.; Letessier-Selvon, A.; Lhenry-Yvon, I.; Link, K.; Lopes, L.; López, R.; López Casado, A.; Luce, Q.; Lucero, A.; Malacari, M.; Mallamaci, M.; Mandat, D.; Mantsch, P.; Mariazzi, A. G.; Mariş, I. C.; Marsella, G.; Martello, D.; Martinez, H.; Martínez Bravo, O.; Masías Meza, J. J.; Mathes, H. J.; Mathys, S.; Matthews, J.; Matthews, J. A. J.; Matthiae, G.; Mayotte, E.; Mazur, P. O.; Medina, C.; Medina-Tanco, G.; Melo, D.; Menshikov, A.; Messina, S.; Micheletti, M. I.; Middendorf, L.; Minaya, I. A.; Miramonti, L.; Mitrica, B.; Mockler, D.; Molina-Bueno, L.; Mollerach, S.; Montanet, F.; Morello, C.; Mostafá, M.; Müller, G.; Muller, M. A.; Müller, S.; Naranjo, I.; Navas, S.; Nellen, L.; Neuser, J.; Nguyen, P. H.; Niculescu-Oglinzanu, M.; Niechciol, M.; Niemietz, L.; Niggemann, T.; Nitz, D.; Nosek, D.; Novotny, V.; Nožka, H.; Núñez, L. A.; Ochilo, L.; Oikonomou, F.; Olinto, A.; Pakk Selmi-Dei, D.; Palatka, M.; Pallotta, J.; Papenbreer, P.; Parente, G.; Parra, A.; Paul, T.; Pech, M.; Pedreira, F.; Pȩkala, J.; Pelayo, R.; Peña-Rodriguez, J.; Pereira, L. A. S.; Perrone, L.; Peters, C.; Petrera, S.; Phuntsok, J.; Piegaia, R.; Pierog, T.; Pieroni, P.; Pimenta, M.; Pirronello, V.; Platino, M.; Plum, M.; Porowski, C.; Prado, R. R.; Privitera, P.; Prouza, M.; Quel, E. J.; Querchfeld, S.; Quinn, S.; Ramos-Pollant, R.; Rautenberg, J.; Ravignani, D.; Reinert, D.; Revenu, B.; Ridky, J.; Risse, M.; Ristori, P.; Rizi, V.; Rodrigues de Carvalho, W.; Rodriguez Fernandez, G.; Rodriguez Rojo, J.; Rodríguez-Frías, M. D.; Rogozin, D.; Rosado, J.; Roth, M.; Roulet, E.; Rovero, A. C.; Saffi, S. J.; Saftoiu, A.; Salazar, H.; Saleh, A.; Salesa Greus, F.; Salina, G.; Sanabria Gomez, J. D.; Sánchez, F.; Sanchez-Lucas, P.; Santos, E. M.; Santos, E.; Sarazin, F.; Sarkar, B.; Sarmento, R.; Sarmiento-Cano, C.; Sato, R.; Scarso, C.; Schauer, M.; Scherini, V.; Schieler, H.; Schmidt, D.; Scholten, O.; Schovánek, P.; Schröder, F. G.; Schulz, A.; Schulz, J.; Schumacher, J.; Sciutto, S. J.; Segreto, A.; Settimo, M.; Shadkam, A.; Shellard, R. C.; Sigl, G.; Silli, G.; Sima, O.; Śmiałkowski, A.; Šmída, R.; Snow, G. R.; Sommers, P.; Sonntag, S.; Sorokin, J.; Squartini, R.; Stanca, D.; Stanič, S.; Stasielak, J.; Strafella, F.; Suarez, F.; Suarez Durán, M.; Sudholz, T.; Suomijärvi, T.; Supanitsky, A. D.; Sutherland, M. S.; Swain, J.; Szadkowski, Z.; Taborda, O. A.; Tapia, A.; Tepe, A.; Theodoro, V. M.; Timmermans, C.; Todero Peixoto, C. J.; Tomankova, L.; Tomé, B.; Tonachini, A.; Torralba Elipe, G.; Torres Machado, D.; Torri, M.; Travnicek, P.; Trini, M.; Ulrich, R.; Unger, M.; Urban, M.; Valbuena-Delgado, A.; Valdés Galicia, J. F.; Valiño, I.; Valore, L.; van Aar, G.; van Bodegom, P.; van den Berg, A. M.; van Vliet, A.; Varela, E.; Vargas Cárdenas, B.; Varner, G.; Vázquez, J. R.; Vázquez, R. A.; Veberič, D.; Verzi, V.; Vicha, J.; Villaseñor, L.; Vorobiov, S.; Wahlberg, H.; Wainberg, O.; Walz, D.; Watson, A. A.; Weber, M.; Weindl, A.; Wiencke, L.; Wilczyński, H.; Winchen, T.; Wittkowski, D.; Wundheiler, B.; Wykes, S.; Yang, L.; Yelos, D.; Yushkov, A.; Zas, E.; Zavrtanik, D.; Zavrtanik, M.; Zepeda, A.; Zimmermann, B.; Ziolkowski, M.; Zong, Z.; Zuccarello, F.

2017-03-01

AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is composed of three scintillation modules, with a 10 m2 detection area per module. In this paper, a new generation of detectors, replacing the current multi-pixel photomultiplier tube (PMT) with silicon photo sensors (aka. SiPMs), is proposed. The selection of the new device and its front-end electronics is explained. A method to calibrate the counting system that ensures the performance of the detector is detailed. This method has the advantage of being able to be carried out in a remote place such as the one where the detectors are deployed. High efficiency results, i.e. 98% efficiency for the highest tested overvoltage, combined with a low probability of accidental counting (~2%), show a promising performance for this new system.

Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing.

Science.gov (United States)

Goyanes, Alvaro; Fina, Fabrizio; Martorana, Annalisa; Sedough, Daniel; Gaisford, Simon; Basit, Abdul W

2017-07-15

The aim of this study was to manufacture 3D printed tablets (printlets) from enteric polymers by single filament fused deposition modeling (FDM) 3D printing (3DP). Hot melt extrusion was used to generate paracetamol-loaded filaments from three different grades of the pharmaceutical excipient hypromellose acetate succinate (HPMCAS), grades LG, MG and HG. One-step 3DP was used to process these filaments into enteric printlets incorporating up to 50% drug loading with two different infill percentages (20 and 100%). X-ray Micro Computed Tomography (Micro-CT) analysis revealed that printlets with 20% infill had cavities in the core compared to 100% infill, and that the density of the 50% drug loading printlets was higher than the equivalent formulations loaded with 5% drug. In biorelevant bicarbonate dissolution media, drug release from the printlets was dependent on the polymer composition, drug loading and the internal structure of the formulations. All HPMCAS-based printlets showed delayed drug release properties, and in the intestinal conditions, drug release was faster from the printlets prepared with polymers with a lower pH-threshold: HPMCAS LG > HPMCAS MG > HPMCAS HG. These results confirm that FDM 3D printing makes it possible not only to manufacture delayed release printlets without the need for an outer enteric coating, but it is also feasible to adapt the release profile in response to the personal characteristics of the patient, realizing the full potential of additive manufacturing in the development of personalised dose medicines. Copyright © 2017 Elsevier B.V. All rights reserved.

Bioaccessibility and Risk of Exposure to Metals and SVOCs in Artificial Turf Field Fill Materials and Fibers.

Science.gov (United States)

Pavilonis, Brian T; Weisel, Clifford P; Buckley, Brian; Lioy, Paul J

2014-01-01

To reduce maintenance costs, municipalities and schools are starting to replace natural grass fields with a new generation synthetic turf. Unlike Astro-Turf, which was first introduced in the 1960s, synthetic field turf provides more cushioning to athletes. Part of this cushioning comes from materials like crumb rubber infill, which is manufactured from recycled tires and may contain a variety of chemicals. The goal of this study was to evaluate potential exposures from playing on artificial turf fields and associated risks to trace metals, semi-volatile organic compounds (SVOCs), and polycyclic aromatic hydrocarbons (PAHs) by examining typical artificial turf fibers (n = 8), different types of infill (n = 8), and samples from actual fields (n = 7). Three artificial biofluids were prepared, which included: lung, sweat, and digestive fluids. Artificial biofluids were hypothesized to yield a more representative estimation of dose than the levels obtained from total extraction methods. PAHs were routinely below the limit of detection across all three biofluids, precluding completion of a meaningful risk assessment. No SVOCs were identified at quantifiable levels in any extracts based on a match of their mass spectrum to compounds that are regulated in soil. The metals were measurable but at concentrations for which human health risk was estimated to be low. The study demonstrated that for the products and fields we tested, exposure to infill and artificial turf was generally considered de minimus, with the possible exception of lead for some fields and materials. © 2013 Society for Risk Analysis.

Blind Measurement Selection: A Random Matrix Theory Approach

KAUST Repository

Elkhalil, Khalil; Kammoun, Abla; Al-Naffouri, Tareq Y.; Alouini, Mohamed-Slim

2016-01-01

-aware fashions. We present two potential applications where the proposed algorithms can be used, namely antenna selection for uplink transmissions in large scale multi-user systems and sensor selection for wireless sensor networks. Numerical results are also

Potential social, institutional, and environmental impacts of selected energy-conservation measures in two Washington communities. [Seattle and Yakima

Energy Technology Data Exchange (ETDEWEB)

Edelson, E.; Olsen, M.

1980-03-01

The likely environmental, social, and institutional impacts of selected energy-conservation measures in two communities in Washington state are reported. The five conservation measures investigated in this study were: (1) retrofitting existing buildings; (2) district heating and Integrated Community Energy Systems (ICES); (3) small automobiles and vehicle redesign; (4) land-use and housing modifications; and (5) electric-utility rate reform. Twenty potential impact areas were selected for analysis. These areas were divided into five categories of environmental impacts, economic impacts, community impacts, personal impacts, and overall quality of life in the community. The research was conducted in Seattle and Yakima, Washington. In each location, about two dozen public officials and business, labor, and community leaders were interviewed. Their diverse views are summarized. The Seattle respondents saw energy conservation as a highly desirable policy with a number of temporary, transitional problems arising as energy-conservation measures were implemented. Yakima respondents, in contrast, did not expect to encounter many serious energy problems in the foreseeable future and consequently viewed energy conservation as a relatively minor community concern. Moreover, they anticipated that many conservation measures, if implemented by the government, would encounter either apathy or resistance in their community. Two broad generalizations can bedrawn from these interviews: (1) energy conservation will basically be beneficial for the natural environment and our society; and (2) if energy conservation does become a dominant thrust in our society, it could stimulate and reinforce a much broader process of fundamental social change. (LCL)

Mesoscale Assessment of CO2 Storage Potential and Geological Suitability for Target Area Selection in the Sichuan Basin

Directory of Open Access Journals (Sweden)

Yujie Diao

2017-01-01

Full Text Available In China, south of the Yangtze River, there are a large number of carbon sources, while the Sichuan Basin is the largest sedimentary basin; it makes sense to select the targets for CO2 geological storage (CGUS early demonstration. For CO2 enhanced oil and gas, coal bed methane recovery (CO2-EOR, EGR, and ECBM, or storage in these depleted fields, the existing oil, gas fields, or coal seams could be the target areas in the mesoscale. This paper proposed a methodology of GIS superimposed multisource information assessment of geological suitability for CO2 enhanced water recovery (CO2-EWR or only storage in deep saline aquifers. The potential per unit area of deep saline aquifers CO2 storage in Central Sichuan is generally greater than 50 × 104 t/km2 at P50 probability level, with Xujiahe group being the main reservoir. CO2 storage potential of depleted gas fields is 53.73 × 108 t, while it is 33.85 × 108 t by using CO2-EGR technology. This paper recommended that early implementation of CGUS could be carried out in the deep saline aquifers and depleted gas fields in the Sichuan Basin, especially that of the latter because of excellent traps, rich geological data, and well-run infrastructures.

Selective adsorption of benzhydroxamic acid on fluorite rendering selective separation of fluorite/calcite

Science.gov (United States)

Jiang, Wei; Gao, Zhiyong; Khoso, Sultan Ahmed; Gao, Jiande; Sun, Wei; Pu, Wei; Hu, Yuehua

2018-03-01

Fluorite, a chief source of fluorine in the nature, usually coexists with calcite mineral in ore deposits. Worldwide, flotation techniques with a selective collector and/or a selective depressant are commonly preferred for the separation of fluorite from calcite. In the present study, an attempt was made to use benzhydroxamic acid (BHA) as a collector for the selective separation of fluorite from calcite without using any depressant. Results obtained from the flotation experiments for single mineral and mixed binary minerals revealed that the BHA has a good selective collecting ability for the fluorite when 50 mg/L of BHA was used at pH of 9. The results from the zeta potential and X-ray photoelectron spectroscopy (XPS) indicated that the BHA easily chemisorbs onto the fluorite as compared to calcite. Crystal chemistry calculations showed the larger Ca density and the higher Ca activity on fluorite surface mainly account for the selective adsorption of BHA on fluorite, leading to the selective separation of fluorite from calcite. Moreover, a stronger hydrogen bonding with BHA and the weaker electrostatic repulsion with BHA- also contribute to the stronger interaction of BHA species with fluorite surface.

Spectrally-Selective Photonic Structures for PV Applications

Directory of Open Access Journals (Sweden)

Benedikt Bläsi

2010-01-01

Full Text Available We review several examples of how spectrally-selective photonic structures may be used to improve solar cell systems. Firstly, we introduce different spectrally-selective structures that are based on interference effects. Examples shown include Rugate filter, edge filter and 3D photonic crystals such as artificial opals. In the second part, we discuss several examples of photovoltaic (PV concepts that utilize spectral selectivity such as fluorescence collectors, upconversion systems, spectrum splitting concepts and the intermediate reflector concept. The potential of spectrally selective filters in the context of solar cells is discussed.

Selective mixed potential based ammonia exhaust gas sensor; Selektiver Ammoniakabgassensor auf Mischpotentialbasis

Energy Technology Data Exchange (ETDEWEB)

Schoenauer, D.; Moos, R. [Bayreuth Univ. (Germany). Lehrstuhl fuer Funktionsmaterialien; Wiesner, K.; Fleischer, M. [Siemens AG, CT PS 6, Muenchen (Germany)

2007-07-01

Mixed potential sensors with additional catalytic deposits on one of two electrodes show a high potential for NH{sub 3} detection. With defined reactions at the covered electrode it is possible to derive a temperature dependent correlation between the gas concentration/composition and the sensor signal which is characteristic for the used electrode material and the catalyst.

Selection of a mineral binder with potentialities for the stabilization/solidification of aluminum metal

Energy Technology Data Exchange (ETDEWEB)

Cau Dit Coumes, C., E-mail: celine.cau-dit-coumes@cea.fr [Commissariat à l’Energie Atomique et aux Energies Alternatives, CEA/DEN/MAR/DTCD/SPDE, BP17171, 30207 Bagnols-sur-Cèze cedex (France); Lambertin, D.; Lahalle, H.; Antonucci, P. [Commissariat à l’Energie Atomique et aux Energies Alternatives, CEA/DEN/MAR/DTCD/SPDE, BP17171, 30207 Bagnols-sur-Cèze cedex (France); Cannes, C.; Delpech, S. [Institut de Physique Nucléaire, CNRS, Univ. Paris-Sud 11, 91406 Orsay Cedex (France)

2014-10-15

Highlights: • Binders capable of reducing the pore solution pH compared with Portland cements are reviewed. • The binders are then tested against aluminum corrosion. • Corrosion of aluminum metal is minimal with magnesium phosphate cement. • The H{sub 2} release can be reduced still further by adding LiNO{sub 3} to the mixing solution. • Electrochemical characterizations show that aluminum tends to a passive state. - Abstract: In a strongly alkaline medium, such as that encountered in conventional cementitious materials based on Portland cement, aluminum metal is corroded, with continued production of hydrogen. In order to develop a mineral matrix having enhanced compatibility with aluminum, a literature review was first undertaken to identify binders capable of reducing the pore solution pH compared with Portland cement. An experimental study was then carried out to measure the hydrogen production resulting from corrosion of aluminum metal rods encapsulated in the different selected cement pastes. The best results were achieved with magnesium phosphate cement, which released very little hydrogen over the duration of the study. This production could be reduced still further by adding a corrosion inhibitor (lithium nitrate) to the mixing solution. Open circuit potential measurement and Electrochemical Impedance Spectroscopy of aluminum electrode encapsulated in two pastes based on Portland cement and magnesium phosphate cement showed different redox behaviors. In the Portland cement paste, the electrochemical data confirmed the corrosion of aluminum whereas this latter tended to a passive state in the magnesium phosphate binder.

Event-Related Potentials (ERPs) in Second Language Research: A Brief Introduction to the Technique, a Selected Review, and an Invitation to Reconsider Critical Periods in L2

Science.gov (United States)

Steinhauer, Karsten

2014-01-01

This article provides a selective overview of recent event-related brain potential (ERP) studies in L2 morpho-syntax, demonstrating that the ERP evidence supporting the critical period hypothesis (CPH) may be less compelling than previously thought. The article starts with a general introduction to ERP methodology and language-related ERP profiles…

Selective androgen receptor modulators: in pursuit of tissue-selective androgens.

Science.gov (United States)

Omwancha, Josephat; Brown, Terry R

2006-10-01

The androgen receptor mediates the androgenic and anabolic activity of the endogenous steroids testosterone and 5alpha-dihydrotestosterone. Current knowledge of the androgen receptor protein structure, and the molecular mechanisms surrounding the binding properties and activities of agonists and antagonists has led to the design and development of novel nonsteroidal ligands with selected tissue-specific androgen receptor agonist and antagonist activities. The activity of these compounds, termed selective androgen receptor modulators (SARMs), is directed toward the maintenance or enhancement of anabolic effects on bone and muscle with minimal androgenic effects on prostate growth. SARMs are of potential therapeutic value in the treatment of male hypogonadism, osteoporosis, frailty and muscle wasting, burn injury and would healing, anemia, mood and depression, benign prostatic hyperplasia and prostate cancer.

The selective Aurora B kinase inhibitor AZD1152 is a potential new treatment for multiple myeloma.

Science.gov (United States)

Evans, Robert P; Naber, Claudia; Steffler, Tara; Checkland, Tamara; Maxwell, Christopher A; Keats, Jonathan J; Belch, Andrew R; Pilarski, Linda M; Lai, Raymond; Reiman, Tony

2008-02-01

Aurora kinases are potential targets for cancer therapy. Previous studies have validated Aurora kinase A as a therapeutic target in multiple myeloma (MM), and have demonstrated in vitro anti-myeloma effects of small molecule Aurora kinase inhibitors that inhibit both Aurora A and B. This study demonstrated that Aurora B kinase was strongly expressed in myeloma cell lines and primary plasma cells. The selective Aurora B inhibitor AZD1152-induced apoptotic death in myeloma cell lines at nanomolar concentrations, with a cell cycle phenotype consistent with that reported previously for Aurora B inhibition. In some cases, AZD1152 in combination with dexamethasone showed increased anti-myeloma activity compared with the use of either agent alone. AZD1152 was active against sorted CD138(+) BM plasma cells from myeloma patients but also, as expected, was toxic to CD138(-) marrow cells from the same patients. In a murine myeloma xenograft model, AZD1152-inhibited tumour growth at well-tolerated doses and induced cell death in established tumours, with associated mild, transient leucopenia. AZD1152 shows promise in these preclinical studies as a novel treatment for MM.

Visual attention spreads broadly but selects information locally.

Science.gov (United States)

Shioiri, Satoshi; Honjyo, Hajime; Kashiwase, Yoshiyuki; Matsumiya, Kazumichi; Kuriki, Ichiro

2016-10-19

Visual attention spreads over a range around the focus as the spotlight metaphor describes. Spatial spread of attentional enhancement and local selection/inhibition are crucial factors determining the profile of the spatial attention. Enhancement and ignorance/suppression are opposite effects of attention, and appeared to be mutually exclusive. Yet, no unified view of the factors has been provided despite their necessity for understanding the functions of spatial attention. This report provides electroencephalographic and behavioral evidence for the attentional spread at an early stage and selection/inhibition at a later stage of visual processing. Steady state visual evoked potential showed broad spatial tuning whereas the P3 component of the event related potential showed local selection or inhibition of the adjacent areas. Based on these results, we propose a two-stage model of spatial attention with broad spread at an early stage and local selection at a later stage.

Structural, morphological, and optical characterizations of Mo, CrN and Mo:CrN sputtered coatings for potential solar selective applications

Science.gov (United States)

Ibrahim, Khalil; Mahbubur Rahman, M.; Taha, Hatem; Mohammadpour, Ehsan; Zhou, Zhifeng; Yin, Chun-Yang; Nikoloski, Aleksandar; Jiang, Zhong-Tao

2018-05-01

Mo, CrN, and Mo:CrN sputtered coatings synthesized onto silicon Si(100) substrates were investigated as solar selective surfaces and their potential applications in optical devices. These coatings were characterized using XRD, SEM, UV-vis, and FTIR techniques. XRD investigation, showed a change in CrN thin film crystallite characteristic due to Mo doping. Compared to the CrN coating, the Mo:CrN film has a higher lattice parameter and lower grain size of 4.19 nm and 106.18 nm, respectively. FESEM morphology confirmed the decrement in Mo:CrN crystal size due to Mo doping. Optical analysis showed that in the visible range of the solar spectrum, the CrN coatings exhibit the highest solar absorptance of 66% while the lowest thermal emittance value of 5.67 was recorded for the CrN coating doped with Mo. Consequently, the highest solar selectivity of 9.6, and the energy band-gap of 2.88 eV were achieved with the Mo-doped CrN coatings. Various optical coefficients such as optical absorption coefficient, refractive index, extinction coefficient, real and imaginary parts of dielectric constants, and energy loss functions of these coatings were also estimated from the optical reflectance data recorded in the wavelength range of 190-2300 nm.

Dipeptidyl peptidase IV as a potential target for selective prodrug activation and chemotherapeutic action in cancers.

Science.gov (United States)

Dahan, Arik; Wolk, Omri; Yang, Peihua; Mittal, Sachin; Wu, Zhiqian; Landowski, Christopher P; Amidon, Gordon L

2014-12-01

The efficacy of chemotherapeutic drugs is often offset by severe side effects attributable to poor selectivity and toxicity to normal cells. Recently, the enzyme dipeptidyl peptidase IV (DPPIV) was considered as a potential target for the delivery of chemotherapeutic drugs. The purpose of this study was to investigate the feasibility of targeting chemotherapeutic drugs to DPPIV as a strategy to enhance their specificity. The expression profile of DPPIV was obtained for seven cancer cell lines using DNA microarray data from the DTP database, and was validated by RT-PCR. A prodrug was then synthesized by linking the cytotoxic drug melphalan to a proline-glycine dipeptide moiety, followed by hydrolysis studies in the seven cell lines with a standard substrate, as well as the glycyl-prolyl-melphalan (GP-Mel). Lastly, cell proliferation studies were carried out to demonstrate enzyme-dependent activation of the candidate prodrug. The relative RT-PCR expression levels of DPPIV in the cancer cell lines exhibited linear correlation with U95Av2 Affymetrix data (r(2) = 0.94), and with specific activity of a standard substrate, glycine-proline-p-nitroanilide (r(2) = 0.96). The significantly higher antiproliferative activity of GP-Mel in Caco-2 cells (GI₅₀ = 261 μM) compared to that in SK-MEL-5 cells (GI₅₀ = 807 μM) was consistent with the 9-fold higher specific activity of the prodrug in Caco-2 cells (5.14 pmol/min/μg protein) compared to SK-MEL-5 cells (0.68 pmol/min/μg protein) and with DPPIV expression levels in these cells. Our results demonstrate the great potential to exploit DPPIV as a prodrug activating enzyme for efficient chemotherapeutic drug targeting.

Please Wait, Processing: A Selective Literature Review of the Neurological Understanding of Emotional Processing in ASD and Its Potential Contribution to Neuroeducation.

Science.gov (United States)

Shyman, Eric

2017-11-17

Autism spectrum disorder (ASD) and its corresponding conditions have been investigated from a multitude of perspectives resulting in varying understandings of its origin, its outplay, its prognosis, and potential methods of intervention and education for individuals with the disorder. One area that has contributed significantly to providing a different type of understanding is that of neuroscience, and specifically neuroimaging. This paper will offer a selective literature review of research that investigates the role of emotional processing in ASD, and how a deepening of this line of understanding can be used to inform more comprehensive educational practices.

Please Wait, Processing: A Selective Literature Review of the Neurological Understanding of Emotional Processing in ASD and Its Potential Contribution to Neuroeducation

Directory of Open Access Journals (Sweden)

Eric Shyman

2017-11-01

Full Text Available Autism spectrum disorder (ASD and its corresponding conditions have been investigated from a multitude of perspectives resulting in varying understandings of its origin, its outplay, its prognosis, and potential methods of intervention and education for individuals with the disorder. One area that has contributed significantly to providing a different type of understanding is that of neuroscience, and specifically neuroimaging. This paper will offer a selective literature review of research that investigates the role of emotional processing in ASD, and how a deepening of this line of understanding can be used to inform more comprehensive educational practices.

Selective Mutism: Phenomenological Characteristics.

Science.gov (United States)

Ford, Mary Ann; Sladeczek, Ingrid E.; Carlson, John; Kratochwill, Thomas R.

1998-01-01

To explore factors related to selective mutism (SM), a survey of persons (N=153, including 135 children) with SM was undertaken. Three theoretical assumptions are supported: (1) variant talking behaviors prior to identification of SM; (2) link between SM and social anxiety; (3) potential link between temperament and SM. (EMK)

The potential of selected macroalgal species for treatment of AMD at different pH ranges in temperate regions.

Science.gov (United States)

Oberholster, Paul J; Cheng, Po-Hsun; Botha, Anna-Maria; Genthe, Bettina

2014-09-01

The metal bioaccumulation potential of selected macroalgae species at different pH ranges was study for usage as part of a possible secondary passive acid mine drainage (AMD) treatment technology in algae ponds. Two separate studies were conducted to determine the suitability of macroalgae for passive treatment when metabolic processes in macrophytes and microorganisms in constructed wetlands decrease during winter months. In the field study, the bioconcentration of metals (mg/kg dry weight) measured in the benthic macroalgae mats was in the following order: site 1. Oedogonium crassum Al > Fe > Mn > Zn; site 2. Klebsormidium klebsii, Al > Fe > Mn > Zn; site 3. Microspora tumidula, Fe > Al > Mn > Zn and site 4. M. tumidula, Fe > Mn > Al > Zn. In the laboratory study, cultured macroalgae K. klebsii, O. crassum and M. tumidula isolated from the field sampling sites were exposed to three different pH values (3, 5 and 7), while bioaccumulation of the metals, Al, Fe, Mn and Zn and glutathione S-transferase (GST) activity were measured in the different selected algae species at a constant water temperature of 14 °C. Bioaccumulation of Al was the highest for O. crassum followed by K. klebsii and M. tumidula (p macroalgae O. crassum at all three tested pH values under constant low water temperature. Copyright © 2014 Elsevier Ltd. All rights reserved.

Selection of antibiotic resistance at very low antibiotic concentrations.

Science.gov (United States)

Sandegren, Linus

2014-05-01

Human use of antibiotics has driven the selective enrichment of pathogenic bacteria resistant to clinically used drugs. Traditionally, the selection of resistance has been considered to occur mainly at high, therapeutic levels of antibiotics, but we are now beginning to understand better the importance of selection of resistance at low levels of antibiotics. The concentration of an antibiotic varies in different body compartments during treatment, and low concentrations of antibiotics are found in sewage water, soils, and many water environments due to natural production and contamination from human activities. Selection of resistance at non-lethal antibiotic concentrations (below the wild-type minimum inhibitory concentration) occurs due to differences in growth rate at the particular antibiotic concentration between cells with different tolerance levels to the antibiotic. The minimum selective concentration for a particular antibiotic is reached when its reducing effect on growth of the susceptible strain balances the reducing effect (fitness cost) of the resistance determinant in the resistant strain. Recent studies have shown that resistant bacteria can be selected at concentrations several hundred-fold below the lethal concentrations for susceptible cells. Resistant mutants selected at low antibiotic concentrations are generally more fit than those selected at high concentrations but can still be highly resistant. The characteristics of selection at low antibiotic concentrations, the potential clinical problems of this mode of selection, and potential solutions will be discussed.

Variable selectivity and the role of nutritional quality in food selection by a planktonic rotifer

International Nuclear Information System (INIS)

Sierszen, M.E.

1990-01-01

To investigate the potential for selective feeding to enhance fitness, I test the hypothesis that an herbivorous zooplankter selects those food items that best support its reproduction. Under this hypothesis, growth and reproduction on selected food items should be higher than on less preferred items. The hypothesis is not supported. In situ selectivity by the rotifer Keratella taurocephala for Cryptomonas relative to Chlamydomonas goes through a seasonal cycle, in apparent response to fluctuating Cryptomonas populations. However, reproduction on a unialgal diet of Cryptomonas is consistently high and similar to that on Chlamydomonas. Oocystis, which also supports reproduction equivalent to that supported by Chlamydomonas, is sometimes rejected by K. taurocephala. In addition, K. taurocephala does not discriminate between Merismopedia and Chlamydomonas even though Merismopedia supports virtually no reproduction by the rotifer. Selection by K. taurocephala does not simply maximize the intake of food items that yield high reproduction. Selectivity is a complex, dynamic process, one function of which may be the exploitation of locally or seasonally abundant foods. (author)

Potential application of palladium nanoparticles as selective recyclable hydrogenation catalysts

International Nuclear Information System (INIS)

Mukherjee, DebKumar

2008-01-01

The search for more efficient catalytic systems that might combine the advantages of both homogeneous (catalyst modulation) and heterogeneous (catalyst recycling) catalysis is one of the most exciting challenges of modern chemistry. More recently with the advances of nanochemistry, it has been possible to prepare soluble analogues of heterogeneous catalysts. These nanoparticles are generally stabilized against aggregation into larger particles by electrostatic or steric protection. Herein we demonstrate the use of room temperature ionic liquid for the stabilization of palladium nanoparticles that are recyclable catalysts for the hydrogenation of carbon-carbon double bonds and application of these catalysts to the selective hydrogenation of internal or terminal C=C bonds in unsaturated primary alcohols. The particles suspended in room temperature ionic liquid show no metal aggregation or loss of catalytic activity even on prolonged use

The Oleaginous Yeast Meyerozyma guilliermondii BI281A as a New Potential Biodiesel Feedstock: Selection and Lipid Production Optimization.

Science.gov (United States)

Ramírez-Castrillón, Mauricio; Jaramillo-Garcia, Victoria P; Rosa, Priscila D; Landell, Melissa F; Vu, Duong; Fabricio, Mariana F; Ayub, Marco A Z; Robert, Vincent; Henriques, João A P; Valente, Patricia

2017-01-01

A high throughput screening (HTS) methodology for evaluation of cellular lipid content based on Nile red fluorescence reads using black background 96-wells test plates and a plate reader equipment allowed the rapid intracellular lipid estimation of strains from a Brazilian phylloplane yeast collection. A new oleaginous yeast, Meyerozyma guilliermondii BI281A, was selected, for which the gravimetric determination of total lipids relative to dry weight was 52.38% for glucose or 34.97% for pure glycerol. The lipid production was optimized obtaining 108 mg/L of neutral lipids using pure glycerol as carbon source, and the strain proved capable of accumulating oil using raw glycerol from a biodiesel refinery. The lipid profile showed monounsaturated fatty acids (MUFA) varying between 56 or 74% in pure or raw glycerol, respectively. M. guilliermondii BI281A bears potential as a new biodiesel feedstock.

Antioxidant Potential of Selected Korean Edible Plant Extracts

Directory of Open Access Journals (Sweden)

Yaejin Woo

2017-01-01

Full Text Available This study aimed to evaluate the antioxidant activity of various plant extracts. A total of 94 kinds of edible plant extracts obtained from the Korea Plant Extract Bank were screened for cytotoxicity, following which the total phenolic content of 24 shortlisted extracts was determined. Of these, extracts from three plants, namely, Castanea crenata (CC leaf, Camellia japonica (CJ fruit, and Viburnum dilatatum (VD leaf, were examined for antioxidant capabilities by measuring radical scavenging activity, ferric reducing/antioxidant power, and lipid peroxidation inhibitory activity. In addition, cellular antioxidant activities of the three extracts were assessed by a cell-based dichlorofluorescein assay and antioxidant response element (ARE reporter activity assay. The results demonstrated that all three extracts concentration-dependently scavenged free radicals, inhibited lipid peroxidation, reduced the cellular level of reactive oxygen species, and increased ARE-luciferase activity, indicating antioxidant enzyme-inducing potential. In particular, CJ extract showed significantly greater antioxidative activity and antimigratory effect in a breast cancer cell line compared to CC and VD extracts. Hence, CJ extract deserves further study for its in vivo functionality or biologically active constituents.

Influence on the oxidative potential of a heavy-duty engine particle emission due to selective catalytic reduction system and biodiesel blend.

Science.gov (United States)

Godoi, Ricardo H M; Polezer, Gabriela; Borillo, Guilherme C; Brown, Andrew; Valebona, Fabio B; Silva, Thiago O B; Ingberman, Aline B G; Nalin, Marcelo; Yamamoto, Carlos I; Potgieter-Vermaak, Sanja; Penteado Neto, Renato A; de Marchi, Mary Rosa R; Saldiva, Paulo H N; Pauliquevis, Theotonio; Godoi, Ana Flavia L

2016-08-01

Although the particulate matter (PM) emissions from biodiesel fuelled engines are acknowledged to be lower than those of fossil diesel, there is a concern on the impact of PM produced by biodiesel to human health. As the oxidative potential of PM has been suggested as trigger for adverse health effects, it was measured using the Electron Spin Resonance (OP(ESR)) technique. Additionally, Energy Dispersive X-ray Fluorescence Spectroscopy (EDXRF) was employed to determine elemental concentration, and Raman Spectroscopy was used to describe the amorphous carbon character of the soot collected on exhaust PM from biodiesel blends fuelled test-bed engine, with and without Selective Catalytic Reduction (SCR). OP(ESR) results showed higher oxidative potential per kWh of PM produced from a blend of 20% soybean biodiesel and 80% ULSD (B20) engine compared with a blend of 5% soybean biodiesel and 95% ULSD (B5), whereas the SCR was able to reduce oxidative potential for each fuel. EDXRF data indicates a correlation of 0.99 between concentration of copper and oxidative potential. Raman Spectroscopy centered on the expected carbon peaks between 1100cm(-1) and 1600cm(-1) indicate lower molecular disorder for the B20 particulate matter, an indicative of a more graphitic carbon structure. The analytical techniques used in this study highlight the link between biodiesel engine exhaust and increased oxidative potential relative to biodiesel addition on fossil diesel combustion. The EDXRF analysis confirmed the prominent role of metals on free radical production. As a whole, these results suggest that 20% of biodiesel blends run without SCR may pose an increased health risk due to an increase in OH radical generation. Copyright © 2015 Elsevier B.V. All rights reserved.

Guided selective deposition of nanoparticles by tuning of the surface potential

Science.gov (United States)

Eklöf, J.; Stolaś, A.; Herzberg, M.; Pekkari, A.; Tebikachew, B.; Gschneidtner, T.; Lara-Avila, S.; Hassenkam, T.; Moth-Poulsen, K.

2017-07-01

Guided deposition of nanoparticles onto different substrates is of great importance for a variety of applications such as biosensing, targeted cancer therapy, anti-bacterial coatings and single molecular electronics. It is therefore important to gain an understanding of what parameters are involved in the deposition of nanoparticles. In this work we have deposited 60 nm, negatively charged, citrate stabilized gold nanoparticles onto microstructures consisting of six different materials, (vanadium (V), silicon dioxide (SiO2), gold (Au), aluminum (Al), copper (Cu) and nickel (Ni)). The samples have then been investigated by scanning electron microscopy to extract the particle density. The surface potential was calculated from the measured surface charge density maps measured by atomic force microscopy while the samples were submerged in a KCl water solution. These values were compared with literature values of the isoelectric points (IEP) of different oxides formed on the metals in an ambient environment. According to measurements, Al had the highest surface potential followed by Ni and Cu. The same trend was observed for the nanoparticle densities. No particles were found on V, SiO2 and Au. The literature values of the IEP showed a different trend compared to the surface potential measurements concluding that IEP is not a reliable parameter for the prediction of NP deposition. Contribution to the Focus Issue Self-assemblies of Inorganic and Organic Nanomaterials edited by Marie-Paule Pileni.

An automated design and fabrication pipeline for improving the strength of 3D printed artifacts under tensile loading

Science.gov (United States)

Al, Can Mert; Yaman, Ulas

2018-05-01

In the scope of this study, an alternative automated method to the conventional design and fabrication pipeline of 3D printers is developed by using an integrated CAD/CAE/CAM approach. It increases the load carrying capacity of the parts by constructing heterogeneous infill structures. Traditional CAM software of Additive Manufacturing machinery starts with a design model in STL file format which only includes data about the outer boundary in the triangular mesh form. Depending on the given infill percentage, the algorithm running behind constructs the interior of the artifact by using homogeneous infill structures. As opposed to the current CAM software, the proposed method provides a way to construct heterogeneous infill structures with respect to the Von Misses stress field results obtained from a finite element analysis. Throughout the work, Rhinoceros3D is used for the design of the parts along with Grasshopper3D, an algorithmic design tool for Rhinoceros3D. In addition, finite element analyses are performed using Karamba3D, a plug-in for Grasshopper3D. According to the results of the tensile tests, the method offers an improvement of load carrying capacity about 50% compared to traditional slicing algorithms of 3D printing.

IDENTIFICATION AND SELECTION OF SIX SIGMA PROJECTS

Directory of Open Access Journals (Sweden)

Abdalhkeim FA. Flifel

2017-04-01

Full Text Available Six Sigma is a well-structured and proven methodology for improving organizational performance. It helps achieving the goals of the organization through the use of project-driven approach. The implementation of Six sigma approach depends on proper identification and selection of projects, moreover, the selection of right Six sigma projects is one of the critical success factors of six sigma efforts. The paper provides the sources for the identification of potential projects, top down and bottom up approaches, the process of selection of projects, guidelines that assist the selection of appropriate projects, selection criteria which must be precisely chosen in accordance with the objectives, needs and capabilities of the organization as well as sophisticated techniques and tools recommended in the literature for the selection of projects.

Stress response assessment of Lactobacillus sakei strains selected as potential autochthonous starter cultures by flow cytometry and nucleic acid double-staining analyses.

Science.gov (United States)

Bonomo, M G; Milella, L; Martelli, G; Salzano, G

2013-09-01

The aim of this study was to apply the flow cytometry to Lactobacillus sakei strains, selected as potential autochthonous starters, to investigate dynamics and physiological heterogeneity of microbial behaviour under different stress conditions. A simultaneous nucleic acid double-staining assay was applied to discriminate cell populations in different physiological states after exposure to heat (50 and 55°C) and acid (pH 2·5 and 3·0) stresses. Alive cells with intact membranes, damaged cells still alive but with injured membranes, so with even a recovery ability, and dead cells with a permanent membrane damage were differentiated with a significant increase in damaged cells after stronger stress treatments. The existence and characteristics of subpopulations displaying heterogeneity in particular conditions are highly relevant, because specific subpopulations may show improved survival, changes and dynamics under stress conditions. This assay has potential for physiological research on lactic acid bacteria and for application in the food industry. The assessment of intermediate physiological states in Lb. sakei strains with recovery possibility could be an important criterion for application of potential starter cultures. Application of flow cytometry and characterization of sorted subpopulations may contribute to further understanding of diversity and heterogeneity in physiology of bacterial populations. © 2013 The Society for Applied Microbiology.

Two-stage Security Controls Selection

NARCIS (Netherlands)

Yevseyeva, I.; Basto, Fernandes V.; Moorsel, van A.; Janicke, H.; Michael, Emmerich T. M.

2016-01-01

To protect a system from potential cyber security breaches and attacks, one needs to select efficient security controls, taking into account technical and institutional goals and constraints, such as available budget, enterprise activity, internal and external environment. Here we model the security

The AMIGA enhancement of the Pierre Auger Observatory

Science.gov (United States)

Maldera, S.

2014-06-01

The AMIGA (Auger Muons and Infill for the Ground Array) enhancement of the Auger Surface Detector consists of a 23.5 km2 infill area instrumented with water-Cherenkov detector stations accompanied by 30 m2 of scintillator counters, buried 2.3 m underground. The spacing of 750 m between the surface detectors extends the energy range as low as 3 × 1017 eV, thus allowing the study of the energy region where the transition between galactic and extra-galactic cosmic rays is expected to take place. We describe the reconstruction of the events observed with the infill water-Cherenkov detector array and the derived energy spectrum. We also discuss the basic properties of the muon detector modules obtained from measurements and tests during the construction phase and from the first data in the field.

Çelik Çaprazla Güçlendirilmiş Dolgu Duvarlı Betonarme Çerçevelerin Doğrusal Olmayan Davranışı

Directory of Open Access Journals (Sweden)

Mustafa SİVRİ

2015-03-01

Full Text Available Improperly designed and constructed reinforced concrete (RC buildings with moment-resisting frame (MRF systems have proven to perform poorly in earthquakes. During recent earthquakes, particularly during the Marmara (1999, Bingol (2003, and Van (2011 earthquakes, large number of RC MRF buildings either sustained severe damage or collapsed. In most of these buildings, masonry infill walls were installed in the structural frames. These so-called non-structural infill walls can interfere with the structural system and may cause premature failure of the latter especially during stronger ground shaking. If infill walls are used to improve strength, stiffness and the overall performance of a structural system, they need to be designed and constructed accordingly. Diagonal strut FRP/steel strip system is one of the preferred retrofit techniques with its mechanical properties, ease of application and low disturbance to inhabitants

Selective replication of oncolytic virus M1 results in a bystander killing effect that is potentiated by Smac mimetics.

Science.gov (United States)

Cai, Jing; Lin, Yuan; Zhang, Haipeng; Liang, Jiankai; Tan, Yaqian; Cavenee, Webster K; Yan, Guangmei

2017-06-27

Oncolytic virotherapy is a treatment modality that uses native or genetically modified viruses that selectively replicate in and kill tumor cells. Viruses represent a type of pathogen-associated molecular pattern and thereby induce the up-regulation of dozens of cytokines via activating the host innate immune system. Second mitochondria-derived activator of caspases (Smac) mimetic compounds (SMCs), which antagonize the function of inhibitor of apoptosis proteins (IAPs) and induce apoptosis, sensitize tumor cells to multiple cytokines. Therefore, we sought to determine whether SMCs sensitize tumor cells to cytokines induced by the oncolytic M1 virus, thus enhancing a bystander killing effect. Here, we report that SMCs potentiate the oncolytic effect of M1 in vitro, in vivo, and ex vivo. This strengthened oncolytic efficacy resulted from the enhanced bystander killing effect caused by the M1 virus via cytokine induction. Through a microarray analysis and subsequent validation using recombinant cytokines, we identified IL-8, IL-1A, and TRAIL as the key cytokines in the bystander killing effect. Furthermore, SMCs increased the replication of M1, and the accumulation of virus protein induced irreversible endoplasmic reticulum stress- and c-Jun N-terminal kinase-mediated apoptosis. Nevertheless, the combined treatment with M1 and SMCs had little effect on normal and human primary cells. Because SMCs selectively and significantly enhance the bystander killing effect and the replication of oncolytic virus M1 specifically in cancer cells, this combined treatment may represent a promising therapeutic strategy.

The potential of aspen clonal forestry in Alberta: breeding regions and estimates of genetic gain from selection.

Directory of Open Access Journals (Sweden)

Tim Gylander

Full Text Available BACKGROUND: Aspen naturally grows in large, single-species, even-aged stands that regenerate clonally after fire disturbance. This offers an opportunity for an intensive clonal forestry system that closely emulates the natural life history of the species. In this paper, we assess the potential of genetic tree improvement and clonal deployment to enhance the productivity of aspen forests in Alberta. We further investigate geographic patterns of genetic variation in aspen and infer forest management strategies under uncertain future climates. METHODOLOGY/PRINCIPAL FINDINGS: Genetic variation among 242 clones from Alberta was evaluated in 13 common garden trials after 5-8 growing seasons in the field. Broad-sense heritabilities for height and diameter at breast height (DBH ranged from 0.36 to 0.64, allowing 5-15% genetic gains in height and 9-34% genetic gains in DBH. Geographic partitioning of genetic variance revealed predominant latitudinal genetic differentiation. We further observed that northward movement of clones almost always resulted in increased growth relative to local planting material, while southward movement had a strong opposite effect. CONCLUSION/SIGNIFICANCE: Aspen forests are an important natural resource in western Canada that is used for pulp and oriented strandboard production, accounting for ~40% of the total forest harvest. Moderate to high broad-sense heritabilities in growth traits suggest good potential for a genetic tree improvement program with aspen. Significant productivity gains appear possible through clonal selection from existing trials. We propose two breeding regions for Alberta, and suggest that well-tested southern clones may be used in the northern breeding region, accounting for a general warming trend observed over the last several decades in Alberta.

The Potential of Aspen Clonal Forestry in Alberta: Breeding Regions and Estimates of Genetic Gain from Selection

Science.gov (United States)

Gylander, Tim; Hamann, Andreas; Brouard, Jean S.; Thomas, Barb R.

2012-01-01

Background Aspen naturally grows in large, single-species, even-aged stands that regenerate clonally after fire disturbance. This offers an opportunity for an intensive clonal forestry system that closely emulates the natural life history of the species. In this paper, we assess the potential of genetic tree improvement and clonal deployment to enhance the productivity of aspen forests in Alberta. We further investigate geographic patterns of genetic variation in aspen and infer forest management strategies under uncertain future climates. Methodology/Principal Findings Genetic variation among 242 clones from Alberta was evaluated in 13 common garden trials after 5–8 growing seasons in the field. Broad-sense heritabilities for height and diameter at breast height (DBH) ranged from 0.36 to 0.64, allowing 5–15% genetic gains in height and 9–34% genetic gains in DBH. Geographic partitioning of genetic variance revealed predominant latitudinal genetic differentiation. We further observed that northward movement of clones almost always resulted in increased growth relative to local planting material, while southward movement had a strong opposite effect. Conclusion/Significance Aspen forests are an important natural resource in western Canada that is used for pulp and oriented strandboard production, accounting for ∼40% of the total forest harvest. Moderate to high broad-sense heritabilities in growth traits suggest good potential for a genetic tree improvement program with aspen. Significant productivity gains appear possible through clonal selection from existing trials. We propose two breeding regions for Alberta, and suggest that well-tested southern clones may be used in the northern breeding region, accounting for a general warming trend observed over the last several decades in Alberta. PMID:22957006

The influence of caffeine on spatial-selective attention : an event-related potential study

NARCIS (Netherlands)

de Ruiter, MB; Snel, J; Lorist, MM; Ruijter, J

2000-01-01

Objectives: Following the indications of previous studies that caffeine might have a specific effect on the processing of spatial information compared with other types of information, the present study investigated the influence of caffeine on an often used spatial-selective attention task. Methods:

Morphological selection and the evaluation of potential tradeoffs between escape from predators and the climbing of waterfalls in the Hawaiian stream goby Sicyopterus stimpsoni.

Science.gov (United States)

Blob, Richard W; Kawano, Sandy M; Moody, Kristine N; Bridges, William C; Maie, Takashi; Ptacek, Margaret B; Julius, Matthew L; Schoenfuss, Heiko L

2010-12-01

Environmental pressures may vary over the geographic range of a species, exposing subpopulations to divergent functional demands. How does exposure to competing demands shape the morphology of species and influence the divergence of populations? We explored these questions by performing selection experiments on juveniles of the Hawaiian goby Sicyopterus stimpsoni, an amphidromous fish that exhibits morphological differences across portions of its geographic range where different environmental pressures predominate. Juvenile S. stimpsoni face two primary and potentially opposing selective pressures on body shape as they return from the ocean to freshwater streams on islands: (1) avoiding predators in the lower reaches of a stream; and (2) climbing waterfalls to reach the habitats occupied by adults. These pressures differ in importance across the Hawaiian Islands. On the youngest island, Hawai'i, waterfalls are close to shore, thereby minimizing exposure to predators and placing a premium on climbing performance. In contrast, on the oldest major island, Kaua'i, waterfalls have eroded further inland, lengthening the exposure of juveniles to predators before migrating juveniles begin climbing. Both juvenile and adult fish show differences in body shape between these islands that would be predicted to improve evasion of predators by fish from Kaua'i (e.g., taller bodies that improve thrust) and climbing performance for fish from Hawai'i (e.g., narrower bodies that reduce drag), matching the prevailing environmental demand on each island. To evaluate how competing selection pressures and functional tradeoffs contribute to the divergence in body shape observed in S. stimpsoni, we compared selection imposed on juvenile body shape by (1) predation by the native fish Eleotris sandwicensis versus (2) climbing an artificial waterfall (∼100 body lengths). Some variables showed opposing patterns of selection that matched predictions: for example, survivors of predation had

Fast and flexible selection with a single switch.

Directory of Open Access Journals (Sweden)

Tamara Broderick

Full Text Available Selection methods that require only a single-switch input, such as a button click or blink, are potentially useful for individuals with motor impairments, mobile technology users, and individuals wishing to transmit information securely. We present a single-switch selection method, "Nomon," that is general and efficient. Existing single-switch selection methods require selectable options to be arranged in ways that limit potential applications. By contrast, traditional operating systems, web browsers, and free-form applications (such as drawing place options at arbitrary points on the screen. Nomon, however, has the flexibility to select any point on a screen. Nomon adapts automatically to an individual's clicking ability; it allows a person who clicks precisely to make a selection quickly and allows a person who clicks imprecisely more time to make a selection without error. Nomon reaps gains in information rate by allowing the specification of beliefs (priors about option selection probabilities and by avoiding tree-based selection schemes in favor of direct (posterior inference. We have developed both a Nomon-based writing application and a drawing application. To evaluate Nomon's performance, we compared the writing application with a popular existing method for single-switch writing (row-column scanning. Novice users wrote 35% faster with the Nomon interface than with the scanning interface. An experienced user (author TB, with 10 hours practice wrote at speeds of 9.3 words per minute with Nomon, using 1.2 clicks per character and making no errors in the final text.

Application Problems of Anchor Dowels in Reinforced Concrete Shear Wall and Frame Connections

OpenAIRE

Musa H. Arslan

2016-01-01

Strengthening of the existing seismically deficient reinforced concrete (RC) buildings is an important issue in earthquake prone regions. Addition of RC shear wall as infill or external walls into the structural system has been a commonly preferred strengthening technique since the Big Erzincan Earthquake occurred in Turkey, 1992. The newly added rigid infill walls act primarily as shear walls and relieve the non-ductile existing frames from being subjected to large shear demands providing th...

Potential evapotranspiration and its impact on autumn phenological phases of selected plants

International Nuclear Information System (INIS)

Palesova, I.

2011-01-01

The work deals with the assessment of the impact of water balance on the timing of phenological phases at two locations (Hips and Bukovina), on the selected tree species (hazel (Corylus avellana L.), hornbeam (Carpinus betulus L.), sessile oak (Quercus petraea, Liebl.)). Phenological observations have been held since 2007, and together with measurements of meteorological parameters allow us to evaluate the microclimate in the stands in detail. (authors)

Non-additive Effects in Genomic Selection

Directory of Open Access Journals (Sweden)

Luis Varona

2018-03-01

Full Text Available In the last decade, genomic selection has become a standard in the genetic evaluation of livestock populations. However, most procedures for the implementation of genomic selection only consider the additive effects associated with SNP (Single Nucleotide Polymorphism markers used to calculate the prediction of the breeding values of candidates for selection. Nevertheless, the availability of estimates of non-additive effects is of interest because: (i they contribute to an increase in the accuracy of the prediction of breeding values and the genetic response; (ii they allow the definition of mate allocation procedures between candidates for selection; and (iii they can be used to enhance non-additive genetic variation through the definition of appropriate crossbreeding or purebred breeding schemes. This study presents a review of methods for the incorporation of non-additive genetic effects into genomic selection procedures and their potential applications in the prediction of future performance, mate allocation, crossbreeding, and purebred selection. The work concludes with a brief outline of some ideas for future lines of that may help the standard inclusion of non-additive effects in genomic selection.

SELEKSI DAN IDENTIFIKASI BAKTERI ENDOFIT POTENSIAL PENGHASIL ENZIM PROTEASE DARI TAMAN NASIONAL GUNUNG HALIMUN - (The Selection and Identification of Potential Endophyte Bacteria as Protease Enzyme Producer from Halimun Mount National Park

Directory of Open Access Journals (Sweden)

Ruth Melliawati

2016-12-01

Full Text Available Endophytic bacteria have an equal chance to bacteria that live outside the plant tissue as potential bacteria. The selection has done towards 326 bacterial endophyte isolates. This research aimed to find and identify proteolytic potential isolates. The proteolytic selection of endophytic bacteria had done using solid skim milk. The capability of endophytic bacteria to agglomerate milk was tested using liquid skim milk which incubated for 7 days at room temperature. Enzyme production of four selected isolates was made through fermentation in GYS medium. The results showed that 86 isolates have proteolytic potential. Isolate HL.29B.63 had highest protease enzymes activity (65.918 U/mL. Medium optimization was able to increase the enzyme activity into 89.94% (125.04 U/mL. The analysis used 16s rDNA showed that isolate HL.29B.63 was Bacillus amyloliquefacient subs. plantarum strain FZB42.Keywords: endophytic bacteria, fermentation, identification, protease, selection ABSTRAKBakteri endofit mempunyai peluang yang sama dengan bakteri yang hidup diluar jaringan tanaman sebagai bakteri potensial. Seleksi dilakukan terhadap 326 isolat bakteri endofit. Tujuan penelitian ini adalah mencari isolat yang berpotensi proteolitik dan mengidentifikasinya. Seleksi proteolitik terhadap bakteri endofitik menggunakan skim milk padat. Uji kemampuan bakteri endofitik dalam menggumpalkan susu menggunakan medium skim milk cair yang diinkubasi selama 7 hari pada suhu ruang. Produksi enzim terhadap empat isolat terseleksi dilakukan melalui fermentasi dalam medium GYS. Hasilnya menunjukkan bahwa 86 isolat mempunyai potensi proteolitik. Isolat HL.29B.63 mempunyai aktif enzim protease tertinggi (65,918 U/mL. Optimasi medium dapat meningkatkan aktivitas enzim sebesar 89,94% (125,04 U/mL. Analisis menggunakan 16s rDNA menunjukkan bahwa isolat HL.29B.63 adalah Bacillus amyloliquefaciens subs. plantarum strain FZB42.Kata kunci: bakteri endofit, fermentasi, identifikasi, protease

Temporal dynamics and neural architecture of action selection

OpenAIRE

Buc Calderon, Cristian

2016-01-01

In this thesis we pitted two views of action selection. On the one hand, a traditional view suggesting that action selection emerges from a sequential process whereby perception, cognition and action proceed serially and are subtended by distinct brain areas. On the other hand, an ecological view (formalized in the affordance competition hypothesis) advocating that action selection stems from the parallel implementation of potential action plans. In parallel, the competition between these act...

The Oleaginous Yeast Meyerozyma guilliermondii BI281A as a New Potential Biodiesel Feedstock: Selection and Lipid Production Optimization

Directory of Open Access Journals (Sweden)

Mauricio Ramírez-Castrillón

2017-09-01

Full Text Available A high throughput screening (HTS methodology for evaluation of cellular lipid content based on Nile red fluorescence reads using black background 96-wells test plates and a plate reader equipment allowed the rapid intracellular lipid estimation of strains from a Brazilian phylloplane yeast collection. A new oleaginous yeast, Meyerozyma guilliermondii BI281A, was selected, for which the gravimetric determination of total lipids relative to dry weight was 52.38% for glucose or 34.97% for pure glycerol. The lipid production was optimized obtaining 108 mg/L of neutral lipids using pure glycerol as carbon source, and the strain proved capable of accumulating oil using raw glycerol from a biodiesel refinery. The lipid profile showed monounsaturated fatty acids (MUFA varying between 56 or 74% in pure or raw glycerol, respectively. M. guilliermondii BI281A bears potential as a new biodiesel feedstock.

The spatial patterns of directional phenotypic selection.

Science.gov (United States)

Siepielski, Adam M; Gotanda, Kiyoko M; Morrissey, Michael B; Diamond, Sarah E; DiBattista, Joseph D; Carlson, Stephanie M

2013-11-01

Local adaptation, adaptive population divergence and speciation are often expected to result from populations evolving in response to spatial variation in selection. Yet, we lack a comprehensive understanding of the major features that characterise the spatial patterns of selection, namely the extent of variation among populations in the strength and direction of selection. Here, we analyse a data set of spatially replicated studies of directional phenotypic selection from natural populations. The data set includes 60 studies, consisting of 3937 estimates of selection across an average of five populations. We performed meta-analyses to explore features characterising spatial variation in directional selection. We found that selection tends to vary mainly in strength and less in direction among populations. Although differences in the direction of selection occur among populations they do so where selection is often weakest, which may limit the potential for ongoing adaptive population divergence. Overall, we also found that spatial variation in selection appears comparable to temporal (annual) variation in selection within populations; however, several deficiencies in available data currently complicate this comparison. We discuss future research needs to further advance our understanding of spatial variation in selection. © 2013 John Wiley & Sons Ltd/CNRS.

The spatial patterns of directional phenotypic selection

KAUST Repository

Siepielski, Adam M.

2013-09-12

Local adaptation, adaptive population divergence and speciation are often expected to result from populations evolving in response to spatial variation in selection. Yet, we lack a comprehensive understanding of the major features that characterise the spatial patterns of selection, namely the extent of variation among populations in the strength and direction of selection. Here, we analyse a data set of spatially replicated studies of directional phenotypic selection from natural populations. The data set includes 60 studies, consisting of 3937 estimates of selection across an average of five populations. We performed meta-analyses to explore features characterising spatial variation in directional selection. We found that selection tends to vary mainly in strength and less in direction among populations. Although differences in the direction of selection occur among populations they do so where selection is often weakest, which may limit the potential for ongoing adaptive population divergence. Overall, we also found that spatial variation in selection appears comparable to temporal (annual) variation in selection within populations; however, several deficiencies in available data currently complicate this comparison. We discuss future research needs to further advance our understanding of spatial variation in selection. © 2013 John Wiley & Sons Ltd/CNRS.

The Sequential Self-Selection Auction Mechanism for Selective Reenlistment Bonuses: Potential Cost Savings to the U.S. Marine Corps

Science.gov (United States)

2007-06-01

information than another party, such as in the market for used cars. Mankiw , in his book, “The Principles of Economics ,” defines adverse selection as...Options,” Power Point presentation e-mailed to the author, 18 May 2007, 1-9. 37 Ibid., 2. 38 Gregory N. Mankiw , Principles of Economics , Third...the Internet.” The American Economic Review. December 1999. 89 No. 5. 1066- 1078. Mankiw , Gregory N. Principles of Economics , Third Edition (Mason

Composite hollow core vaults: An analysis of the Fusée Céramic System and the design of form-active environmental friendly roofs

Directory of Open Access Journals (Sweden)

Wim Kamerling

2016-03-01

Full Text Available Just after World-War II building materials were scarce, architects and engineers had to design buildings using not much cement and steel. In French an architect, Jacques Couëlle, had invented a system with céramique infill elements to reduce for structures of concrete the self-weight and need of cement and steel. In the fifties and sixties of the twentieth century these céramique elements, known as Fusée Céramique elements, were used widely in France, North Africa and the Netherlands, mostly for barrel vaults and shells. Nowadays most of these structures are pulled down and the remaining buildings do not meet the demands of the present concerning climate comfort, insulation and safety. This thesis analyses the structural design of cylindrical Fusée Céramique roofs in the context of those days. The effect of the céramique infill elements for the time dependent deformations, stiffness and load bearing capacity, including second order, is studied. To save the few remaining buildings for the coming generations the possibilities to strengthen these structures with slender light elements of steel are explored. The effect of the strengthening is described for a Fusée Céramique vault, designed and constructed in the past. Reinforced concrete is a widely used building material with many advantages. Unfortunately the production of both reinforcement and cement is quite energy intensive and causes the emission of greenhouse gasses as NO2, NO and CO2. Reducing the need of cement is a relative simple way to reduce the emission of these greenhouse gasses. In practice roofs are seldom really flat but curved or at least slightly inclined, to drain rainwater and snow. Structurally curved structures, transferring loads as a surface-active or form-active structural system, are very efficient. The need of material and the self-weight is pretty low. This can be very useful if in the future the potentials of roofs for producing food and energy are used more

Selection of Potential Therapeutic Bacteriophages that Lyse a CTX-M-15 Extended Spectrum β-Lactamase Producing Salmonella enterica Serovar Typhi Strain from the Democratic Republic of the Congo

Directory of Open Access Journals (Sweden)

Elene Kakabadze

2018-04-01

Full Text Available Recently, a Salmonella Typhi isolate producing CTX-M-15 extended spectrum β-lactamase (ESBL and with decreased ciprofloxacin susceptibility was isolated in the Democratic Republic of the Congo. We have selected bacteriophages that show strong lytic activity against this isolate and have potential for phage-based treatment of S. Typhi, and Salmonella in general.

Nuclear power plant site selection: a case study

International Nuclear Information System (INIS)

Lugasi, Y.; Mehrez, A.; Sinuany-Stern, Z.

1985-01-01

Selecting the site for a nuclear power plant involves the evaluation of numerous criteria and the professional judgment of various experts. The Israel Atomic Energy Commission has been concerned with the problem of selecting a site for a nuclear power station. Previous studies have been performed by the commission to identify potential sites. There were initial screenings where potential sites were chosen according to various minimal criteria and international standards. Only sites that met all the criteria were chosen. A study was made to find the most preferred site among the potential sites that met all the criteria. Two mathematical approaches were used: Keeney's multiattribute utility function and Saaty's eigenvalue prioritization technique. Both models ranked the same site as the most desirable; however, the models differed in their ranking of the other sites

Potential exposure to endocrine disrupting chemicals and selected adverse pregnancy outcomes

DEFF Research Database (Denmark)

Bengtsson, Jessica; Thygesen, Pernille Søgaard; Kaerlev, Linda

2017-01-01

potential occupational exposure to endocrine disrupting chemicals (EDC) of the mother during pregnancy is associated with preterm birth and low birth weight. Methods: Pregnant women referred to an Occupational Health Clinic (OHC) in two Danish regions (Copenhagen or Aarhus) between 1984 and 2010, suspected...

BSL-3 laboratory practices in the United States: comparison of select agent and non-select agent facilities.

Science.gov (United States)

Richards, Stephanie L; Pompei, Victoria C; Anderson, Alice

2014-01-01

New construction of biosafety level 3 (BSL-3) laboratories in the United States has increased in the past decade to facilitate research on potential bioterrorism agents. The Centers for Disease Control and Prevention inspect BSL-3 facilities and review commissioning documentation, but no single agency has oversight over all BSL-3 facilities. This article explores the extent to which standard operating procedures in US BSL-3 facilities vary between laboratories with select agent or non-select agent status. Comparisons are made for the following variables: personnel training, decontamination, personal protective equipment (PPE), medical surveillance, security access, laboratory structure and maintenance, funding, and pest management. Facilities working with select agents had more complex training programs and decontamination procedures than non-select agent facilities. Personnel working in select agent laboratories were likely to use powered air purifying respirators, while non-select agent laboratories primarily used N95 respirators. More rigorous medical surveillance was carried out in select agent workers (although not required by the select agent program) and a higher level of restrictive access to laboratories was found. Most select agent and non-select agent laboratories reported adequate structural integrity in facilities; however, differences were observed in personnel perception of funding for repairs. Pest management was carried out by select agent personnel more frequently than non-select agent personnel. Our findings support the need to promote high quality biosafety training and standard operating procedures in both select agent and non-select agent laboratories to improve occupational health and safety.

Generation of “LYmph Node Derived Antibody Libraries” (LYNDAL) for selecting fully human antibody fragments with therapeutic potential.

Science.gov (United States)

Diebolder, Philipp; Keller, Armin; Haase, Stephanie; Schlegelmilch, Anne; Kiefer, Jonathan D; Karimi, Tamana; Weber, Tobias; Moldenhauer, Gerhard; Kehm, Roland; Eis-Hübinger, Anna M; Jäger, Dirk; Federspil, Philippe A; Herold-Mende, Christel; Dyckhoff, Gerhard; Kontermann, Roland E; Arndt, Michaela A E; Krauss, Jürgen

2014-01-01

The development of efficient strategies for generating fully human monoclonal antibodies with unique functional properties that are exploitable for tailored therapeutic interventions remains a major challenge in the antibody technology field. Here, we present a methodology for recovering such antibodies from antigen-encountered human B cell repertoires. As the source for variable antibody genes, we cloned immunoglobulin G (IgG)-derived B cell repertoires from lymph nodes of 20 individuals undergoing surgery for head and neck cancer. Sequence analysis of unselected “LYmph Node Derived Antibody Libraries” (LYNDAL) revealed a naturally occurring distribution pattern of rearranged antibody sequences, representing all known variable gene families and most functional germline sequences. To demonstrate the feasibility for selecting antibodies with therapeutic potential from these repertoires, seven LYNDAL from donors with high serum titers against herpes simplex virus (HSV) were panned on recombinant glycoprotein B of HSV-1. Screening for specific binders delivered 34 single-chain variable fragments (scFvs) with unique sequences. Sequence analysis revealed extensive somatic hypermutation of enriched clones as a result of affinity maturation. Binding of scFvs to common glycoprotein B variants from HSV-1 and HSV-2 strains was highly specific, and the majority of analyzed antibody fragments bound to the target antigen with nanomolar affinity. From eight scFvs with HSV-neutralizing capacity in vitro,the most potent antibody neutralized 50% HSV-2 at 4.5 nM as a dimeric (scFv)2. We anticipate our approach to be useful for recovering fully human antibodies with therapeutic potential.

Multilocation trial of potential selected mutant lines of groundnut (arachis hypogaea) at 3 location in Peninsular Malaysia

International Nuclear Information System (INIS)

Abdul Rahim Harun; Rusli Ibrahim; Khairuddin Abdul Rahim; Shuhaimi Shamsuddin

2002-01-01

Two fixed mutant lines of groundnut derived from cultivar Matjan were selected for their yield potential at M 1 0 generation. Multilocation trial of these mutants (MJ40/42 and MJ20/165-5) was carried out to evaluate genotype stability at different climate and soil types in Peninsular Malaysia. The mutant lines were planted and compared with their parent (Matjan) and control variety (MKT1). The identified locations were in Taiping (Perak), Machang (Kelantan), and Air Hitam (Johor). The soils at the locations were of the Serdang, Bungor and Rengam series, respectively. The trial was carried out simultaneously in the same year at each location. Mutant MJ20/165-5 showed stable performance at all location compared to other genotypes tested. Its yield was higher than the parent in Kelantan and Johor trial and showed similar performance in Perak. This mutant also showed better yield performance than the control varieties in the Kelantan trial. Meanwhile, mutant line MJ40/42 gave better yield in Kelantan and Johor but did not perform well in Perak as compared to its parent and control varieties. (Author)

Molecular Components of Catalytic Selectivity

Energy Technology Data Exchange (ETDEWEB)

Somorjai, Gabor A.; Park, Jeong Y.

2008-07-02

Selectivity, that is, to produce one molecule out of many other thermodynamically feasible product molecules, is the key concept to develop 'clean manufacturing' processes that do not produce byproducts (green chemistry). Small differences in potential energy barriers for elementary reaction steps control which reaction channel is more likely to yield the desired product molecule (selectivity), instead of the overall activation energy for the reaction that controls turnover rates (activity). Recent studies have demonstrated the atomic- or molecular-level tailoring of parameters such as the surface structures of active sites that give rise to nanoparticle size and shape dependence of turnover rates and reaction selectivities. Here, we highlight seven molecular components that influence reaction selectivities. These include: surface structure, adsorbate-induced restructuring, adsorbate mobility, reaction intermediates, surface composition, charge transport, and oxidation states for model metal single crystal and colloid nanoparticle catalysts. We show examples of their functioning and describe in-situ instruments that permit us to investigate their roles in surface reactions.

Phenolic content, antioxidant potential and Aedes aegyptii ecological friend larvicidal activity of some selected Egyptian plants.

Science.gov (United States)

El-Hela, Atef A; Abdel-Hady, Nevein M; Dawoud, Gouda T M; Hamed, Abdo M; Morsy, Tosson A

2013-04-01

Polyphenols constitute a distinct group of natural compounds of medicinal importance exhibiting wide range of physiological activities as antioxidant, immunestimulant, antitumor and antiparasitic. Yellow fever and dengue fever are mosquito-borne infectious diseases transmitted by Aedes aegyptii, the presence of yellow fever in Sudan and dengue fever in Saudi Arabia are threats to Egypt with the reemerging of Ae. aegyptii in Southern Egypt, larvae control is feasible than flying adults. This work was conducted targeting estimation of the relative levels of total phenolic content, antioxidant potential and larvicidal activity of 110 selected Egyptian plants. The highest total phenolic contents were estimated in aqueous extracts of Coronilla scorpioides L., Forsskaolea tenacissima L., Crataegus sinaica Boiss., Pistacia khinjuk Boiss. and Loranthus acacia Benth.; they were 916.70 +/- 4.80, 813.70 +/- 4.16, 744.90 +/- 4.93, 549.00 +/- 3.93& 460.80 +/- 4.02 mg% while those of methanol extracts were estimated in Coronilla scorpioides, Forsskaolea tenacissima, Crataegus sinaica, Loranthus acacia and Pistacia khinjuk, they were 915.60-4.86, 664.60 +/- 4.16, 659.30 +/- 4.80, 590.80 +/- 4.49 & 588.00 +/- 3.85 mg% respectively. Investigation of the antioxidant potentials revealed that the most potent plants were Co-ronilla scorpioides, Forsskaolea tenacissima, Crataegus sinaica, Pistacia khinjuk and Loranthus acacia with calculated values of 454.80 +/- 4.83, 418.4 +/- 4.16, 399.10 +/- 4.90, 342.5 +/- 2.72 & 239.7 +/- 2.91% for aqueous extracts and 452.9 +/- 4.94, 389.6 +/- 4.6, 378.48 +/- 3.84, 352.3 +/- 3.06 & 346.5 +/- 2.98% for methanol extracts respectively while screening of larvicidal activity proved that Coronilla scorpioides, Forsskaolea tenacissima, Crataegus sinaica, Pistacia khinjuk and Loranthus acacia exhibited highest potency calculated as 22.53 +/- 2.01, 23.85 +/- 2.07, 28.17 +/- 2.06, 31.60 +/- 2.93 & 39.73 +/- 4.58 mg% aqueous extracts and 18.53 +/- 1.95, 18

Periodical cicadas use light for oviposition site selection.

Science.gov (United States)

Yang, Louie H

2006-12-07

Organisms use incomplete information from local experience to assess the suitability of potential habitat sites over a wide range of spatial and temporal scales. Although ecologists have long recognized the importance of spatial scales in habitat selection, few studies have investigated the temporal scales of habitat selection. In particular, cues in the immediate environment may commonly provide indirect information about future habitat quality. In periodical cicadas (Magicicada spp.), oviposition site selection represents a very long-term habitat choice. Adult female cicadas insert eggs into tree branches during a few weeks in the summer of emergence, but their oviposition choices determine the underground habitats of root-feeding nymphs over the following 13 or 17 years. Here, field experiments are used to show that female cicadas use the local light environment of host trees during the summer of emergence to select long-term host trees. Light environments may also influence oviposition microsite selection within hosts, suggesting a potential behavioural mechanism for associating solar cues with host trees. In contrast, experimental nutrient enrichment of host trees did not influence cicada oviposition densities. These findings suggest that the light environments around host trees may provide a robust predictor of host tree quality in the near future. This habitat selection may influence the spatial distribution of several cicada-mediated ecological processes in eastern North American forests.

Mapping of reed in shallow bays. SFR-Site Forsmark

Energy Technology Data Exchange (ETDEWEB)

Stroemgren, Maarten; Lindgren, Fredrik (Umeaa Univ. (Sweden))

2011-03-15

The regolith-lake development model (RLDM) describes the development of shallow bays to lakes and the infilling of lakes in the Forsmark area during an interglacial. The sensitivity analysis has shown the need for an update of the infill procedure in the RLDM. Data from the mapping of reed in shallow bays in the Forsmark area will be used to improve the infill procedure of an updated RLDM. The field work was performed in August 26-31, 2010. The mapping of reed was done in 124 points. In these points, coordinates and water depth were mapped using an echo sounder and a DGPS. Quaternary deposits and the thickness of soft sediments were mapped using an earth probe. Measurement points were delivered in ESRI shape format with coordinates in RT90 2.5 gon W and altitudes in the RHB70 system for storage in SKB's GIS data base

Detecting Attacks in CyberManufacturing Systems: Additive Manufacturing Example

Directory of Open Access Journals (Sweden)

Wu Mingtao

2017-01-01

Full Text Available CyberManufacturing System is a vision for future manufacturing where physical components are fully integrated with computational processes in a connected environment. However, realizing the vision requires that its security be adequately ensured. This paper presents a vision-based system to detect intentional attacks on additive manufacturing processes, utilizing machine learning techniques. Particularly, additive manufacturing systems have unique vulnerabilities to malicious attacks, which can result in defective infills but without affecting the exterior. In order to detect such infill defects, the research uses simulated 3D printing process images as well as actual 3D printing process images to compare accuracies of machine learning algorithms in classifying, clustering and detecting anomalies on different types of infills. Three algorithms - (i random forest, (ii k nearest neighbor, and (iii anomaly detection - have been adopted in the research and shown to be effective in detecting such defects.

CLINICAL AND MORPHOLOGICAL CLASSIFICATION OF CEREBRAL INTRAVENTRICULAR HEMORRHAGES

Directory of Open Access Journals (Sweden)

V. V. Vlasyuk

2013-01-01

Full Text Available Inconsistency of the current classification of cerebral intraventricular hemorrhages is discussed in the article. The author explains divergence of including of the subependymal (1st stage and intracerebral (4th stage hemorrhages into this classification. A new classification of cerebral intraventricular hemorrhages including their origin, phases and stages is offered. The most common origin of intraventricular hemorrhages is subependymal hemorrhage (82,2%. Two phases of hemorrhage were distinguished: bleeding phase and resorption phase. Stages of intraventricular hemorrhages reflecting the blood movement after the onset of bleeding are the following: 1 — infill of the up to ½ of the lateral ventricles without their enlargement; 2 — infill of more than ½ of the lateral ventricles with their enlargement; 3 — infill of the IV ventricle, of the cerebellomedullary cistern and its dislocation into the subarachnoid space of the cerebellum, pons varolii, medulla oblongata and spinal cord.

The potential of task shifting selected maternal interventions to auxiliary midwives in Myanmar: a mixed-method study.

Science.gov (United States)

Than, Kyu Kyu; Tin, Khaing Nwe; La, Thazin; Thant, Kyaw Soe; Myint, Theingi; Beeson, James G; Luchters, Stanley; Morgan, Alison

2018-01-03

An estimated 282 women die for every 100,000 live births in Myanmar, most due to preventable causes. Auxiliary Midwives (AMWs) in Myanmar are responsible for providing a package of care during pregnancy and childbirth to women in rural hard to reach areas where skilled birth attendants (Midwives) are not accessible. This study aims to examine the role of AMWs in Myanmar and to assess the current practices of three proposed essential maternal interventions (oral supplement distribution to pregnant women; administration of misoprostol to prevent postpartum haemorrhage; management of puerperal sepsis with oral antibiotics) in order to facilitate a formal integration of these tasks to AMWs in Myanmar. A mixed methods study was conducted in Magwe Region, Myanmar involving a survey of 262 AMWs, complemented by 15 focus group discussions with midwives (MWs), AMWs, mothers and community members, and 10 key informant interviews with health care providers at different levels within the health care system. According to current government policy, AMWs are responsible for identifying pregnant women, screening for danger signs and facilitating early referral, provision of counselling on nutrition and birth preparedness for women in hard-to-reach areas. AMWs also assist at normal deliveries and help MWs provide immunization services. In practice, they also provide oral supplements to pregnant women (84%), provide antibiotics to mothers during the puerperium (43%), and provide misoprostol to prevent postpartum haemorrhage (41%). The current practices of AMWs demonstrate the potential for task shifting on selected essential maternal interventions. However, to integrate these interventions into formal practice they must be complemented with appropriate training, clear guidelines on drug use, systematic recording and reporting, supportive monitoring and supervision and a clear political commitment towards task shifting. With the current national government's commitment towards one

Stratigraphy, artefact industries and hominid associations for Sterkfontein, member 5.

Science.gov (United States)

Kuman, K; Clarke, R J

2000-06-01

A revised stratigraphy for the early hominid site of Sterkfontein (Gauteng Province, South Africa) reveals a complex distribution of infills in the main excavation area between 2.8 and 1.4 m.y.a, as well as deposits dating to the mid to late Pleistocene. New research now shows that the Member 4 australopithecine breccia (2.8-2.6 Ma) extends further west than was previously thought, while a late phase of Member 4 is recognized in a southern area. The artefact-bearing breccias were defined sedimentologically as Member 5, but one supposed part of these younger breccias, the StW 53 infill, lacks in situ stone tools, although it does appear to post-date 2.6 Ma when artefacts first appear in the archaeological record. The StW 53 hominid, previously referred to Homo habilis, is here argued to be Australopithecus. The first artefact-bearing breccia of Member 5 is the Oldowan Infill, estimated at 2-1.7 Ma. It occupies a restricted distribution in Member 5 east and contains an expedient, flake-based tool industry associated with a few fossils of Paranthropos robustus. An enlarged cave opening subsequently admitted one or more Early Acheulean infills associated in Member 5 west with Homo ergaster. The artefacts attest to a larger site accumulation between ca. 1.7 and 1.4 Ma, with more intensive use of quartzite over quartz and a subtle but important shift to large flakes and heavier-duty tools. The available information on palaeoenvironments is summarized, showing an overall change from tropical to sub-tropical gallery forest, forest fringe and woodland conditions in Member 4 to more open woodland and grassland habitats in the later units, but with suggestions of a wet localized topography in the Paranthropus -bearing Oldowan Infill. Copyright 2000 Academic Press.

The importance of environmental quality and catch potential to fishing site selection by freshwater anglers in Mississippi

Science.gov (United States)

Schramm, H.L.; Gerard, P.D.; Gill, D.A.

2003-01-01

We measured the importance of 24 fishing site attributes to Mississippi freshwater anglers. Factor analysis identified four multiattribute factors as important in the selection of fishing location: CLEAN ENVIRONMENT CATCH, COST AND HARVEST and AMENITIES AND SAFETY. In general, the importance of site selection factors differed little among anglers grouped by preferred type of fish, preferred fishing location (lakes and reservoirs, rivers and streams, ponds, or reservoir tailwaters), usual manner of fishing (engine-powered boat, nonpowered boat, or shore), or change in fishing frequency. COST AND HARVEST was more important to anglers with high harvest orientations. We found low correlations between site selection factor importance scores and angler age, fishing frequency, fishing expenditures, or fishing motivation factors. We suggest that the general lack of differences in site selection factors among angler groups indicates that management strategies to improve fishing site attributes should benefit all angler groups. Clean fishing environments and awareness of the availability of desired sport fishes were "very" or "extremely" important to fishing site selection by more than 70% of Mississippi freshwater anglers and should be priority management objectives.

Radiosynthesis of [11C]SB-705498, a selective transient receptor potential Vanilloid 1 (TRPV1) receptor antagonist

International Nuclear Information System (INIS)

Dolle, F.; Bramoulle, Y.; Deverre, J.R.; Bottlaender, M.; Passchier, J.

2011-01-01

Complete text of publication follows: Objectives: The transient receptor potential vanilloid 1 (TRPV1) receptor, previously known as the vanilloid receptor 1 (VR1), is a non-selective cation channel activated by a range of noxious stimuli and highly expressed in nociceptive fibres. TRPV1 receptor is involved in pain and sensitisation associated with tissue injury and inflammation and therefore represents a pharmacological target of choice for the development of novel therapeutic agents for the treatment of chronic pain, migraine and gastrointestinal disorders. Among a novel series of pyrrolidinyl ureas recently discovered by GSK, SB-705498 (1, namely 1-(2-bromophenyl)-3-[(R)-1-(5- trifluoromethylpyridin-2-yl)pyrrolidin-3-yl]urea) has been identified as a potent, selective and orally bioavailable TRPV1 antagonist and considered for positron emission tomography studies. SB-705498 (1) has therefore been isotopically labelled with the short-lived positron-emitter carbon-11 (t1/2: 20.38 min) at its urea site using [ 11 C]phosgene in a one-pot two-step process, via the intermediate preparation of 2-bromophenyl [ 11 C]isocyanate. Methods: Carbon-11-labeling of SB-705498 comprises: (A) Trapping of [ 11 C]phosgene (radio-synthesized from cyclotron-produced [ 11 C]methane via [ 11 C]carbon tetrachloride using minor modifications of published processes) at room temperature for 1 to 2 minutes in 250 μL of acetonitrile containing 0.6 μmole of 2-bromoaniline (2) giving 2-bromophenyl [ 11 C]isocyanate ([ 11 C]-3), followed by (B) addition of an excess of chiral (R)-1-(5- trifluoromethylpyridin-2-yl)pyrrolidin-3-ylamine (4, 40 μmoles in 500 μL of acetonitrile) as the second amine and reaction at room temperature for an additional one minute giving the desired urea derivative ([ 11 C]SB-705498 ([ 11 C]-1)), (C) dilution of the crude reaction mixture with water (500 μL) containing 4% (v:v) of DEA, injection and purification on a semi-preparative Waters Symmetry R C18 HPLC

Training Select-in Interviewers for Astronaut Selection: A Program Evaluation

Science.gov (United States)

Hysong, S.; Galarza, L.; Holland, A.; Billica, Roger (Technical Monitor)

2000-01-01

Psychological factors critical to the success of short and long-duration missions have been identified in previous research; however, evaluation for such critical factors in astronaut applicants leaves much room for human interpretation. Thus, an evaluator training session was designed to standardize the interpretation of critical factors, as well as the structure of the select-in interview across evaluators. The purpose of this evaluative study was to determine the effectiveness of the evaluator training sessions and their potential impact on evaluator ratings.

The physiology of follicle selection

Directory of Open Access Journals (Sweden)

Zeleznik Anthony J

2004-06-01

Full Text Available Abstract During the follicular phase of the primate menstrual cycle, a single follicle usually matures to the preovulatory stage and releases its oocyte for fertilization and the potential establishment of pregnancy. In assisted reproductive technology procedures, it is desirable to override the natural process of follicle selection to produce many oocytes that are capable of being fertilized and undergoing normal embryo development. The goal of this chapter is to summarize the current views regarding the natural process of follicle selection in primates and to discuss how this process may be amplified to produce a greater number of oocytes.

Selection of cellulolytic fungi isolated from diverse substrates

Directory of Open Access Journals (Sweden)

Mônica Caramez Triches Damaso

2012-08-01

Full Text Available The aim of the present work was to select filamentous fungi isolated from diverse substrates to obtain the strains with potential to produce the hydrolytic enzymes. From a total of 215 strains, seven strains from the soils, six from the plants and one from sugarcane bagasse were selected and identified as belonging to the Trichoderma, Penicillium and Aspergillus genera. The best hydrolytic activities obtained by semi-solid fermentation using these strains were approximately: 35; 1; 160; 170 and 120 U/gdm (CMCase, FPase, β-glucosidase, xylanase and polygalacturonase, respectively, demonstrating their potential to synthesize the enzymes compared with the results reported in the literature.

Influence of vegetation on the infilling of a macrotidal embayment: examples from salt marshes and shingle spit of the Baie de Somme (North France)

Science.gov (United States)

Le Bot, Sophie; Forey, Estelle; Lafite, Robert; Langlois, Estelle

2015-04-01

As many estuaries in the English Channel, the Baie de Somme is currently filling with a mean seabed elevation between 1.3 and 1.8 cm/yr. Embankments and polders, as well as sea level rise, increase this natural accretion process, which leads to important modifications of environment uses. Interactions between vegetation and sediment dynamics constitute a key-point to consider, in order to better understand the infilling processes in estuaries. To estimate the effect of vegetation on these processes, two particular environments have been studied in the bay: (i) the mid salt marsh covered with Halimione portulacoides, associated with a silty sedimentation, and (ii) the shingle spit, that closes the bay from the South, on which the sea kale (Crambe maritime), a protected pioneer species, develops. Salt marshes progress with a rate of 5-10 m/yr (mean value calculated on the 1947-2011 period). Sedimentological analysis have been conducted on 9 cores (50cm long) collected in three Halimione communities of the bay. They are associated with a silty-dominated (38-84 micrometer) sedimentation under the influence of decantation processes. Rhythmicity is observed in the sedimentation, due to the repetition of a two-layer pattern, that includes a dark layer composed of vegetal rests and that would represent annual sedimentation. Annual sedimentation rates (0.7 to 5.8 cm/yr) are consistent with mean values previously recorded. The shingle spit progresses to the North under the influence of the littoral drift at a rate of 7 m/yr (mean value calculated on the 1947-2011 period). Sea kales are observed on parts formed since several years, above the level of the highest astronomical tides. TLS surveys and sedimentation bars have allowed to measure erosion/sedimentation volumes at the scale of the spit and of sea kale individuals, during spring 2013. Individuals of this species facilitate the trapping of sand, transported by winds from the intertidal flats. Sea kale thus contributes

Influence on the oxidative potential of a heavy-duty engine particle emission due to selective catalytic reduction system and biodiesel blend

International Nuclear Information System (INIS)

Godoi, Ricardo H.M.; Polezer, Gabriela; Borillo, Guilherme C.; Brown, Andrew; Valebona, Fabio B.; Silva, Thiago O.B.; Ingberman, Aline B.G.; Nalin, Marcelo; Yamamoto, Carlos I.; Potgieter-Vermaak, Sanja; Penteado Neto, Renato A.; Marchi, Mary Rosa R. de; Saldiva, Paulo H.N.; Pauliquevis, Theotonio; Godoi, Ana Flavia L.

2016-01-01

Although the particulate matter (PM) emissions from biodiesel fuelled engines are acknowledged to be lower than those of fossil diesel, there is a concern on the impact of PM produced by biodiesel to human health. As the oxidative potential of PM has been suggested as trigger for adverse health effects, it was measured using the Electron Spin Resonance (OP"E"S"R) technique. Additionally, Energy Dispersive X-ray Fluorescence Spectroscopy (EDXRF) was employed to determine elemental concentration, and Raman Spectroscopy was used to describe the amorphous carbon character of the soot collected on exhaust PM from biodiesel blends fuelled test-bed engine, with and without Selective Catalytic Reduction (SCR). OP"E"S"R results showed higher oxidative potential per kWh of PM produced from a blend of 20% soybean biodiesel and 80% ULSD (B20) engine compared with a blend of 5% soybean biodiesel and 95% ULSD (B5), whereas the SCR was able to reduce oxidative potential for each fuel. EDXRF data indicates a correlation of 0.99 between concentration of copper and oxidative potential. Raman Spectroscopy centered on the expected carbon peaks between 1100 cm"−"1 and 1600 cm"−"1 indicate lower molecular disorder for the B20 particulate matter, an indicative of a more graphitic carbon structure. The analytical techniques used in this study highlight the link between biodiesel engine exhaust and increased oxidative potential relative to biodiesel addition on fossil diesel combustion. The EDXRF analysis confirmed the prominent role of metals on free radical production. As a whole, these results suggest that 20% of biodiesel blends run without SCR may pose an increased health risk due to an increase in OH radical generation. - Highlights: • PM emission from biodiesel burning may be more harmful to human health than diesel. • Euro V (SCR) engine fuelled with B5 and B20 tested in a bench dynamometer • Electron Spin Resonance (ESR) to access the oxidative potential of PM emission �

Influence on the oxidative potential of a heavy-duty engine particle emission due to selective catalytic reduction system and biodiesel blend

Energy Technology Data Exchange (ETDEWEB)

Godoi, Ricardo H.M., E-mail: rhmgodoi@ufpr.br [Environmental Engineering Department, Federal University of Parana, Curitiba, PR (Brazil); Polezer, Gabriela; Borillo, Guilherme C. [Environmental Engineering Department, Federal University of Parana, Curitiba, PR (Brazil); Brown, Andrew [Division of Chemistry and Environmental Science, School of Science and the Environment, Manchester Metropolitan University, Manchester (United Kingdom); Valebona, Fabio B.; Silva, Thiago O.B.; Ingberman, Aline B.G. [Environmental Engineering Department, Federal University of Parana, Curitiba, PR (Brazil); Nalin, Marcelo [LAVIE - Institute of Chemistry, São Paulo State University - UNESP, Araraquara (Brazil); Yamamoto, Carlos I. [Chemical Engineering Department, Federal University of Parana, Curitiba, PR (Brazil); Potgieter-Vermaak, Sanja [Division of Chemistry and Environmental Science, School of Science and the Environment, Manchester Metropolitan University, Manchester (United Kingdom); Penteado Neto, Renato A. [Vehicle Emissions Laboratory, Institute of Technology for Development (LACTEC), Curitiba, PR (Brazil); Marchi, Mary Rosa R. de [Analytical Chemistry Department, Institute of Chemistry, São Paulo State University - UNESP, Araraquara (Brazil); Saldiva, Paulo H.N. [Laboratory of Experimental Air Pollution, Department of Pathology, School of Medicine, University of São Paulo, São Paulo (Brazil); Pauliquevis, Theotonio [Department of Natural and Earth Sciences, Federal University of São Paulo, Diadema (Brazil); Godoi, Ana Flavia L. [Environmental Engineering Department, Federal University of Parana, Curitiba, PR (Brazil)

2016-08-01

Although the particulate matter (PM) emissions from biodiesel fuelled engines are acknowledged to be lower than those of fossil diesel, there is a concern on the impact of PM produced by biodiesel to human health. As the oxidative potential of PM has been suggested as trigger for adverse health effects, it was measured using the Electron Spin Resonance (OP{sup ESR}) technique. Additionally, Energy Dispersive X-ray Fluorescence Spectroscopy (EDXRF) was employed to determine elemental concentration, and Raman Spectroscopy was used to describe the amorphous carbon character of the soot collected on exhaust PM from biodiesel blends fuelled test-bed engine, with and without Selective Catalytic Reduction (SCR). OP{sup ESR} results showed higher oxidative potential per kWh of PM produced from a blend of 20% soybean biodiesel and 80% ULSD (B20) engine compared with a blend of 5% soybean biodiesel and 95% ULSD (B5), whereas the SCR was able to reduce oxidative potential for each fuel. EDXRF data indicates a correlation of 0.99 between concentration of copper and oxidative potential. Raman Spectroscopy centered on the expected carbon peaks between 1100 cm{sup −1} and 1600 cm{sup −1} indicate lower molecular disorder for the B20 particulate matter, an indicative of a more graphitic carbon structure. The analytical techniques used in this study highlight the link between biodiesel engine exhaust and increased oxidative potential relative to biodiesel addition on fossil diesel combustion. The EDXRF analysis confirmed the prominent role of metals on free radical production. As a whole, these results suggest that 20% of biodiesel blends run without SCR may pose an increased health risk due to an increase in OH radical generation. - Highlights: • PM emission from biodiesel burning may be more harmful to human health than diesel. • Euro V (SCR) engine fuelled with B5 and B20 tested in a bench dynamometer • Electron Spin Resonance (ESR) to access the oxidative potential of

Radioactive waste repository site selection in the Republic of Slovenia

International Nuclear Information System (INIS)

Jeran, M.

1992-01-01

The report shows the procedure for the low and intermediate level radwaste (LLW and ILW) repository site selection and the work performed up to the present. The procedure for the repository site selection is divided into four steps. In the first step the unsuitable areas are excluded by taking into consideration the rough exclusion criteria. In the second step, the remaining suitable areas are screened to identify the potential sites with respect to preference criteria. In the third step three to five candidate sites will be assessed and selected among the potential sites. In the final, the fourth step, detailed site investigation and confirmation of one or two most suitable sites will follow. In Slovenia the 1st and the 2nd step of site selection have been completed, while step 3 is now in its final stage. (author) [sl

Male partner selectivity, romantic confidence, and media depictions of partner scarcity.

Science.gov (United States)

Taylor, Laramie D

2013-01-18

An experiment was conducted to explore the effects of exposure to partner scarcity or abundance messages on men's partner selectivity, romantic confidence, and self-assessed attractiveness. Undergraduate male participants watched a soap opera narrative featuring either two men competing over one potential female partner (partner scarcity) or two women competing over one potential male partner (partner abundance). Relative to control subjects, watching either narrative reduced romantic confidence. Experimental condition also affected partner selectivity and self-assessed attractiveness, though both effects were moderated by endorsement of traditional masculine ideology. Viewing the abundance narrative resulted in greater selectivity and self-assessed attractiveness for men high in endorsement of traditional masculinity but diminished selectivity and self-assessed attractiveness for men low in endorsement of traditional masculine identity.

Male Partner Selectivity, Romantic Confidence, and Media Depictions of Partner Scarcity

Directory of Open Access Journals (Sweden)

Laramie D. Taylor

2013-01-01

Full Text Available An experiment was conducted to explore the effects of exposure to partner scarcity or abundance messages on men's partner selectivity, romantic confidence, and self-assessed attractiveness. Undergraduate male participants watched a soap opera narrative featuring either two men competing over one potential female partner (partner scarcity or two women competing over one potential male partner (partner abundance. Relative to control subjects, watching either narrative reduced romantic confidence. Experimental condition also affected partner selectivity and self-assessed attractiveness, though both effects were moderated by endorsement of traditional masculine ideology. Viewing the abundance narrative resulted in greater selectivity and self-assessed attractiveness for men high in endorsement of traditional masculinity but diminished selectivity and self-assessed attractiveness for men low in endorsement of traditional masculine identity.

Decoys Selection in Benchmarking Datasets: Overview and Perspectives

Science.gov (United States)

Réau, Manon; Langenfeld, Florent; Zagury, Jean-François; Lagarde, Nathalie; Montes, Matthieu

2018-01-01

Virtual Screening (VS) is designed to prospectively help identifying potential hits, i.e., compounds capable of interacting with a given target and potentially modulate its activity, out of large compound collections. Among the variety of methodologies, it is crucial to select the protocol that is the most adapted to the query/target system under study and that yields the most reliable output. To this aim, the performance of VS methods is commonly evaluated and compared by computing their ability to retrieve active compounds in benchmarking datasets. The benchmarking datasets contain a subset of known active compounds together with a subset of decoys, i.e., assumed non-active molecules. The composition of both the active and the decoy compounds subsets is critical to limit the biases in the evaluation of the VS methods. In this review, we focus on the selection of decoy compounds that has considerably changed over the years, from randomly selected compounds to highly customized or experimentally validated negative compounds. We first outline the evolution of decoys selection in benchmarking databases as well as current benchmarking databases that tend to minimize the introduction of biases, and secondly, we propose recommendations for the selection and the design of benchmarking datasets. PMID:29416509

Big Data in the Industry - Overview of Selected Issues

Science.gov (United States)

Gierej, Sylwia

2017-12-01

This article reviews selected issues related to the use of Big Data in the industry. The aim is to define the potential scope and forms of using large data sets in manufacturing companies. By systematically reviewing scientific and professional literature, selected issues related to the use of mass data analytics in production were analyzed. A definition of Big Data was presented, detailing its main attributes. The importance of mass data processing technology in the development of Industry 4.0 concept has been highlighted. Subsequently, attention was paid to issues such as production process optimization, decision making and mass production individualisation, and indicated the potential for large volumes of data. As a result, conclusions were drawn regarding the potential of using Big Data in the industry.

Characterization of the apoptotic response induced by the cyanine dye D112: a potentially selective anti-cancer compound.

Directory of Open Access Journals (Sweden)

Ning Yang

Full Text Available Chemotherapeutic drugs that are used in anti-cancer treatments often cause the death of both cancerous and noncancerous cells. This non-selective toxicity is the root cause of untoward side effects that limits the effectiveness of therapy. In order to improve chemotherapeutic options for cancer patients, there is a need to identify novel compounds with higher discrimination for cancer cells. In the past, methine dyes that increase the sensitivity of photographic emulsions have been investigated for anti-cancer properties. In the 1970's, Kodak Laboratories initiated a screen of approximately 7000 dye structural variants for selective toxicity. Among these, D112 was identified as a promising compound with elevated toxicity against a colon cancer cell line in comparison to a non-transformed cell line. Despite these results changing industry priorities led to a halt in further studies on D112. We decided to revive investigations on D112 and have further characterized D112-induced cellular toxicity. We identified that in response to D112 treatment, the T-cell leukemia cell line Jurkat showed caspase activation, mitochondrial depolarization, and phosphatidylserine externalization, all of which are hallmarks of apoptosis. Chemical inhibition of caspase enzymatic activity and blockade of the mitochondrial pathway through Bcl-2 expression inhibited D112-induced apoptosis. At lower concentrations, D112 induced growth arrest. To gain insight into the molecular mechanism of D112 induced mitochondrial dysfunction, we analyzed the intracellular localization of D112, and found that D112 associated with mitochondria. Interestingly, in the cell lines that we tested, D112 showed increased toxicity toward transformed versus non-transformed cells. Results from this work identify D112 as a potentially interesting molecule warranting further investigation.

A Potential Approach for Low Flow Selection in Water Resource Supply and Management

Science.gov (United States)

Ying Ouyang

2012-01-01

Low flow selections are essential to water resource management, water supply planning, and watershed ecosystem restoration. In this study, a new approach, namely the frequent-low (FL) approach (or frequent-low index), was developed based on the minimum frequent-low flow or level used in minimum flows and/or levels program in northeast Florida, USA. This FL approach was...

Selective Attention, Working Memory, and Executive Function as Potential Independent Sources of Cognitive Dysfunction in Schizophrenia.

Science.gov (United States)

Gold, James M; Robinson, Benjamin; Leonard, Carly J; Hahn, Britta; Chen, Shuo; McMahon, Robert P; Luck, Steven J

2017-11-11

People with schizophrenia demonstrate impairments in selective attention, working memory, and executive function. Given the overlap in these constructs, it is unclear if these represent distinct impairments or different manifestations of one higher-order impairment. To examine this question, we administered tasks from the basic cognitive neuroscience literature to measure visual selective attention, working memory capacity, and executive function in 126 people with schizophrenia and 122 healthy volunteers. Patients demonstrated deficits on all tasks with the exception of selective attention guided by strong bottom-up inputs. Although the measures of top-down control of selective attention, working memory, and executive function were all intercorrelated, several sources of evidence indicate that working memory and executive function are separate sources of variance. Specifically, both working memory and executive function independently contributed to the discrimination of group status and independently accounted for variance in overall general cognitive ability as assessed by the MATRICS battery. These two cognitive functions appear to be separable features of the cognitive impairments observed in schizophrenia. © The Author 2017. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Wind energy potential in India

International Nuclear Information System (INIS)

Rangarajan, S.

1995-01-01

Though located in the tropics, India is endowed with substantial wind resources because of its unique geographical location which gets fully exposed to both the south-west and north-east monsoon winds. The westerly winds of the south-west monsoons provide bulk of the wind potential. Areas with mean annual wind speed exceeding 18 k mph and areas with mean annual power density greater than 140 W/m 2 have been identified using the wind data collected by the wind monitoring project funded by the Ministry of Non-conventional Energy Sources (MNES). Seasonal variations in wind speed at selected locations are discussed as also the frequency distribution of hourly wind speed. Annual capacity factors for 250 kW wind electric generators have been calculated for several typical locations. A good linear correlation has been found between mean annual wind speed and mean annual capacity factor. A method is described for assessing wind potential over an extended region where adequate data is available. It is shown that the combined wind energy potential over five selected areas of limited extent in Gujarat, Andhra Pradesh and Tamil Nadu alone amounts to 22,000 MW under the assumption of 20 per cent land availability for installing wind farms. For a higher percentage of land availability, the potential will be correspondingly higher. (author). 12 refs., 6 figs., 3 tabs

Contrasting eruption styles of the 147 Kimberlite, Fort à la Corne, Saskatchewan, Canada

Science.gov (United States)

Lefebvre, Nathalie; Kurszlaukis, Stephan

2008-06-01

and fracturing the overlying volcaniclastic main infill. Finally, blocks of the main infill tilted and possibly slumped into the subsidence structure developed above the emptied explosion chamber of 147. The different volcanic deposits reflect a change in eruption style and fragmentation level from highly explosive to spatter activity with little fragmentation potential. Cap rocks to build up the volatile overpressure necessary to blast the craters were not present at the time of emplacement. No diatremes were observed in the study area. Assuming that the magma properties remained constant over time, the change in eruption style has to be attributed to external factors, such as water access to the rising magma. The volcanic behaviour of the kimberlite magma appears to be comparable to that of other magmatic systems, both in eruptive style and production rate. No evidence was found for a high, possibly Plinian production rate or dispersion.

Contribution to the study of fluoride dosing by using a membrane selective electrode

International Nuclear Information System (INIS)

Rivas, Jean de

1972-01-01

As the method of dosing fluoride ions by precipitation with lead fluorochloride is not very satisfying, the author reports the study of a new process for the dosing of the fluorine ion by using a selective electrode. After some generalities on selective electrodes (principle, types, operation principle) and some recalls and definitions (Galvani and Volta potential, stability constants of complexes, principles of diffusion in solids), the author reports the study of the diffusion potential in glass membranes, the study of the membrane potential, and the study of the ion exchange equilibrium. He presents methods of calculation of selectivity coefficients of membrane electrodes, and the reports experiments performed in laboratory

New Signal Readout Principle for Solid-Contact Ion-Selective Electrodes.

Science.gov (United States)

Vanamo, Ulriika; Hupa, Elisa; Yrjänä, Ville; Bobacka, Johan

2016-04-19

A novel approach to signal transduction concerning solid-contact ion-selective electrodes (SC-ISE) with a conducting polymer (CP) as the solid contact is investigated. The method presented here is based on constant potential coulometry, where the potential of the SC-ISE vs the reference electrode is kept constant using a potentiostat. The change in the potential at the interface between the ion-selective membrane (ISM) and the sample solution, due to the change in the activity of the primary ion, is compensated with a corresponding but opposite change in the potential of the CP solid contact. This enforced change in the potential of the solid contact results in a transient reducing/oxidizing current flow through the SC-ISE. By measuring and integrating the current needed to transfer the CP to a new state of equilibrium, the total cumulated charge that is linearly proportional to the change of the logarithm of the primary ion activity is obtained. In this work, different thicknesses of poly(3,4-ethylenedioxythiophene) (PEDOT) doped with poly(styrenesulfonate) (PSS) were used as solid contact. Also, coated wire electrodes (CWEs) were included in the study to show the general validity of the new approach. The ISM employed was selective for K(+) ions, and the selectivity of the membrane under implementation of the presented transduction mechanism was confirmed by measurements performed with a constant background concentration of Na(+) ions. A unique feature of this signal readout principle is that it allows amplification of the analytical signal by increasing the capacitance (film thickness) of the solid contact of the SC-ISE.

GIS-based identification of areas with mineral resource potential for six selected deposit groups, Bureau of Land Management Central Yukon Planning Area, Alaska

Science.gov (United States)

Jones, James V.; Karl, Susan M.; Labay, Keith A.; Shew, Nora B.; Granitto, Matthew; Hayes, Timothy S.; Mauk, Jeffrey L.; Schmidt, Jeanine M.; Todd, Erin; Wang, Bronwen; Werdon, Melanie B.; Yager, Douglas B.

2015-01-01

This study, covering the Bureau of Land Management (BLM) Central Yukon Planning Area (CYPA), Alaska, was prepared to aid BLM mineral resource management planning. Estimated mineral resource potential and certainty are mapped for six selected mineral deposit groups: (1) rare earth element (REE) deposits associated with peralkaline to carbonatitic intrusive igneous rocks, (2) placer and paleoplacer gold, (3) platinum group element (PGE) deposits associated with mafic and ultramafic intrusive igneous rocks, (4) carbonate-hosted copper deposits, (5) sandstone uranium deposits, and (6) tin-tungsten-molybdenum-fluorspar deposits associated with specialized granites. These six deposit groups include most of the strategic and critical elements of greatest interest in current exploration.

Continuous Self-Selection Processes in Teacher Education: The Way for Survival.

Science.gov (United States)

Zak, Itai

1981-01-01

Three selection phases were found in a study investigating the selection process of students into the teaching profession: (1) self selection by the potential teacher; (2) admission to the teacher-training program; and (3) election to undergo the course of instruction. Results suggest that personality traits are more important than cognitive…

Selection of materials with potential in sensible thermal energy storage

International Nuclear Information System (INIS)

Fernandez, A.I.; Martinez, M.; Segarra, M.; Martorell, I.; Cabeza, L.F.

2010-01-01

Thermal energy storage is a technology under investigation since the early 1970s. Since then, numerous new applications have been found and much work has been done to bring this technology to the market. Nevertheless, the materials used either for latent or for sensible storage were mostly investigated 30 years ago, and the research has lead to improvement in their performance under different conditions of applications. In those years a significant number of new materials were developed in many fields other than storage and energy, but a great effort to characterize and classify these materials was done. Taking into account the fact that thousands of materials are known and a large number of new materials are developed every year, the authors use the methodology for materials selection developed by Prof. Ashby to give an overview of other materials suitable to be used in thermal energy storage. Sensible heat storage at temperatures between 150 and 200 C is defined as a case study and two different scenarios were considered: long term sensible heat storage and short term sensible heat storage. (author)

[Potential selection bias in telephone surveys: landline and mobile phones].

Science.gov (United States)

Garcia-Continente, Xavier; Pérez-Giménez, Anna; López, María José; Nebot, Manel

2014-01-01

The increasing use of mobile phones in the last decade has decreased landline telephone coverage in Spanish households. This study aimed to analyze sociodemographic characteristics and health indicators by type of telephone service (mobile phone vs. landline or landline and mobile phone). Two telephone surveys were conducted in Spanish samples (February 2010 and February 2011). Multivariate logistic regression analyses were performed to analyze differences in the main sociodemographic characteristics and health indicators according to the type of telephone service available in Spanish households. We obtained 2027 valid responses (1627 landline telephones and 400 mobile phones). Persons contacted through a mobile phone were more likely to be a foreigner, to belong to the manual social class, to have a lower educational level, and to be a smoker than those contacted through a landline telephone. The profile of the population that has only a mobile phone differs from that with a landline telephone. Therefore, telephone surveys that exclude mobile phones could show a selection bias. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

Final disposal of spent nuclear fuel - basis for site selection

International Nuclear Information System (INIS)

Anttila, P.

1995-05-01

International organizations, e.g. IAEA, have published several recommendations and guides for the safe disposal of radioactive waste. There are three major groups of issues affecting the site selection process, i.e. geological, environmental and socioeconomic. The first step of the site selection process is an inventory of potential host rock formations. After that, potential study areas are screened to identify sites for detailed investigations, prior to geological conditions and overall suitability for the safe disposal. This kind of stepwise site selection procedure has been used in Finland and in Sweden. A similar approach has been proposed in Canada, too. In accordance with the amendment to the Nuclear Energy Act, that entered into force in the beginning of 1995, Imatran Voima Oy has to make preparations for the final disposal of spent fuel in the Finnish bedrock. Relating to the possible site selection, the following geological factors, as internationally recommended and used in the Nordic countries, should be taken into account: topography, stability of bedrock, brokenness and fracturing of bedrock, size of bedrock block, rock type, predictability and natural resources. The bedrock of the Loviisa NPP site is a part of the Vyborg rapakivi massif. As a whole the rapakivi granite area forms a potential target area, although other rock types or areas cannot be excluded from possible site selection studies. (25 refs., 7 figs.)

Orientation selectivity of synaptic input to neurons in mouse and cat primary visual cortex.

Science.gov (United States)

Tan, Andrew Y Y; Brown, Brandon D; Scholl, Benjamin; Mohanty, Deepankar; Priebe, Nicholas J

2011-08-24

Primary visual cortex (V1) is the site at which orientation selectivity emerges in mammals: visual thalamus afferents to V1 respond equally to all stimulus orientations, whereas their target V1 neurons respond selectively to stimulus orientation. The emergence of orientation selectivity in V1 has long served as a model for investigating cortical computation. Recent evidence for orientation selectivity in mouse V1 opens cortical computation to dissection by genetic and imaging tools, but also raises two essential questions: (1) How does orientation selectivity in mouse V1 neurons compare with that in previously described species? (2) What is the synaptic basis for orientation selectivity in mouse V1? A comparison of orientation selectivity in mouse and in cat, where such measures have traditionally been made, reveals that orientation selectivity in mouse V1 is weaker than in cat V1, but that spike threshold plays a similar role in narrowing selectivity between membrane potential and spike rate. To uncover the synaptic basis for orientation selectivity, we made whole-cell recordings in vivo from mouse V1 neurons, comparing neuronal input selectivity-based on membrane potential, synaptic excitation, and synaptic inhibition-to output selectivity based on spiking. We found that a neuron's excitatory and inhibitory inputs are selective for the same stimulus orientations as is its membrane potential response, and that inhibitory selectivity is not broader than excitatory selectivity. Inhibition has different dynamics than excitation, adapting more rapidly. In neurons with temporally modulated responses, the timing of excitation and inhibition was different in mice and cats.

Perils and potentials of self-selected entry to epidemiological studies and surveys

DEFF Research Database (Denmark)

Keiding, Niels; Louis, Thomas A.

2016-01-01

Low front-end cost and rapid accrual make Web-based surveys and enrolment in studies attractive, but participants are often self-selected with little reference to a well-defined study base. Of course, high quality studies must be internally valid (validity of inferences for the sample at hand......), but Web-based enrolment reactivates discussion of external validity (generalization of within-study inferences to a target population or context) in epidemiology and clinical trials. Survey research relies on a representative sample produced by a sampling frame, prespecified sampling process and weighting...

The Missing Response to Selection in the Wild.

Science.gov (United States)

Pujol, Benoit; Blanchet, Simon; Charmantier, Anne; Danchin, Etienne; Facon, Benoit; Marrot, Pascal; Roux, Fabrice; Scotti, Ivan; Teplitsky, Céline; Thomson, Caroline E; Winney, Isabel

2018-05-01

Although there are many examples of contemporary directional selection, evidence for responses to selection that match predictions are often missing in quantitative genetic studies of wild populations. This is despite the presence of genetic variation and selection pressures - theoretical prerequisites for the response to selection. This conundrum can be explained by statistical issues with accurate parameter estimation, and by biological mechanisms that interfere with the response to selection. These biological mechanisms can accelerate or constrain this response. These mechanisms are generally studied independently but might act simultaneously. We therefore integrated these mechanisms to explore their potential combined effect. This has implications for explaining the apparent evolutionary stasis of wild populations and the conservation of wildlife. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Phenomenological aspects of nonrelativistic potential models

International Nuclear Information System (INIS)

Lucha, W.; Schoeberl, F.F.

1989-01-01

This review reports on the description of hardrons as bound states of quarks by nonrelativistic potential models. It contains a brief sketch of the way in which information on the form of the inter-quark potential may be gained from quantum chromodynamics, proofs of some general theorems related to the potential-model approach, a discussion of the significance of the treatment of bound states consisting of relativistically-moving constituents by the nonrelativistic Schroedinger formalism, as well as a brief survey of the motivations for the various proposed potential models. Finally, it illustrates the application of the developed theoretical framework at a few selected examples. 60 refs., 8 figs., 17 tabs. (Authors)

A genome-wide scan for selection signatures in Nellore cattle.

Science.gov (United States)

Somavilla, A L; Sonstegard, T S; Higa, R H; Rosa, A N; Siqueira, F; Silva, L O C; Torres Júnior, R A A; Coutinho, L L; Mudadu, M A; Alencar, M M; Regitano, L C A

2014-12-01

Brazilian Nellore cattle (Bos indicus) have been selected for growth traits for over more than four decades. In recent years, reproductive and meat quality traits have become more important because of increasing consumption, exports and consumer demand. The identification of genome regions altered by artificial selection can potentially permit a better understanding of the biology of specific phenotypes that are useful for the development of tools designed to increase selection efficiency. Therefore, the aims of this study were to detect evidence of recent selection signatures in Nellore cattle using extended haplotype homozygosity methodology and BovineHD marker genotypes (>777,000 single nucleotide polymorphisms) as well as to identify corresponding genes underlying these signals. Thirty-one significant regions (P meat quality, fatty acid profiles and immunity. In addition, 545 genes were identified in regions harboring selection signatures. Within this group, 58 genes were associated with growth, muscle and adipose tissue metabolism, reproductive traits or the immune system. Using relative extended haplotype homozygosity to analyze high-density single nucleotide polymorphism marker data allowed for the identification of regions potentially under artificial selection pressure in the Nellore genome, which might be used to better understand autozygosity and the effects of selection on the Nellore genome. © 2014 Stichting International Foundation for Animal Genetics.

An integrated study of the Grayburg/San Andres reservoir, Foster and south Cowden fields, Ector County, Texas. Quarterly report, January 1--March 31, 1996

Energy Technology Data Exchange (ETDEWEB)

Trentham, R.C.; Weinbrandt, R.; Reeves, J.J.

1996-06-17

The principal objective of this research is to demonstrate in the field that 3D seismic data can be used to aid in identifying porosity zones, permeability barriers and thief zones and thereby improve waterflood design. Geologic and engineering data will be integrated with the geophysical data to result in a detailed reservoir characterization. Reservoir simulation will then be used to determine infill drilling potential and the optimum waterflood design for the project area. This design will be implemented and the success of the waterflood evaluated.

Herbal Therapies for Type 2 Diabetes Mellitus: Chemistry, Biology, and Potential Application of Selected Plants and Compounds

Directory of Open Access Journals (Sweden)

Cicero L. T. Chang

2013-01-01

Full Text Available Diabetes mellitus has been recognized since antiquity. It currently affects as many as 285 million people worldwide and results in heavy personal and national economic burdens. Considerable progress has been made in orthodox antidiabetic drugs. However, new remedies are still in great demand because of the limited efficacy and undesirable side effects of current orthodox drugs. Nature is an extraordinary source of antidiabetic medicines. To date, more than 1200 flowering plants have been claimed to have antidiabetic properties. Among them, one-third have been scientifically studied and documented in around 460 publications. In this review, we select and discuss blood glucose-lowering medicinal herbs that have the ability to modulate one or more of the pathways that regulate insulin resistance, β-cell function, GLP-1 homeostasis, and glucose (reabsorption. Emphasis is placed on phytochemistry, anti-diabetic bioactivities, and likely mechanism(s. Recent progress in the understanding of the biological actions, mechanisms, and therapeutic potential of compounds and extracts of plant origin in type 2 diabetes is summarized. This review provides a source of up-to-date information for further basic and clinical research into herbal therapy for type 2 diabetes. Emerging views on therapeutic strategies for type 2 diabetes are also discussed.

Selection for high muscle fat in rainbow trout induces potentially higher chylomicron synthesis and PUFA biosynthesis in the intestine.

Science.gov (United States)

Kamalam, Biju Sam; Panserat, Stephane; Aguirre, Peyo; Geurden, Inge; Fontagné-Dicharry, Stéphanie; Médale, Françoise

2013-02-01

Two lines of rainbow trout divergently selected for muscle fat content, fat line (F) and lean line (L) were used to investigate the effect of genetic selection on digestion, intestinal nutrient transport and fatty acid bioconversion, in relation to dietary starch intake. This study involved a digestibility trial for 2 weeks using Cr(2)O(3) as inert marker, followed by a feeding trial for 4 weeks. For the entire duration, juvenile trout from the two lines were fed diets with or without gelatinized starch. Blood, pyloric ceca, midgut and hindgut were sampled at 24 h after the last meal. Transcripts of the proteins involved in nutrient transport and fatty acid bioconversion were abundant in the proximal intestine. GLUT2 transcripts were slightly higher in the F line ceca than in the L line. Dietary starch intake did not enhance the transcription of intestinal glucose transporters, SGLT1 and GLUT2; but it was associated with the higher expression of ApoA1 and PepT1 in the midgut. Significantly, the F line exhibited higher intestinal mRNA levels of MTP, ApoA4, Elovl2, Elovl5 and D6D than the L line, linked to chylomicron assembly and fatty acid bioconversion. Apparent digestibility coefficients of protein, lipid and starch were high in both lines, but not significantly different between them. In conclusion, we found a higher potential of chylomicron synthesis and fatty acid bioconversion in the intestine of F line, but no adaptive transcriptional response of glucose transporters to dietary starch and no genotypic differences in nutrient digestibility. Copyright © 2012 Elsevier Inc. All rights reserved.

Newly-formed emotional memories guide selective attention processes: Evidence from event-related potentials

OpenAIRE

Harald T. Schupp; Ursula Kirmse; Ralf Schmälzle; Tobias Flaisch; Britta Renner

2016-01-01

Emotional cues can guide selective attention processes. However, emotional stimuli can both activate long-term memory representations reflecting general world knowledge and engage newly formed memory representations representing specific knowledge from the immediate past. Here, the self-completion feature of associative memory was utilized to assess the regulation of attention processes by newly-formed emotional memory. First, new memory representations were formed by presenting pictures depi...

All-Solid-State Sodium-Selective Electrode with a Solid Contact of Chitosan/Prussian Blue Nanocomposite

Directory of Open Access Journals (Sweden)

Tanushree Ghosh

2017-11-01

Full Text Available Conventional ion-selective electrodes with a liquid junction have the disadvantage of potential drift. All-solid-state ion-selective electrodes with solid contact in between the metal electrode and the ion-selective membrane offer high capacitance or conductance to enhance potential stability. Solution-casted chitosan/Prussian blue nanocomposite (ChPBN was employed as the solid contact layer for an all-solid-state sodium ion-selective electrode in a potentiometric sodium ion sensor. Morphological and chemical analyses confirmed that the ChPBN is a macroporous network of chitosan that contains abundant Prussian blue nanoparticles. Situated between a screen-printed carbon electrode and a sodium-ionophore-filled polyvinylchloride ion-selective membrane, the ChPBN layer exhibited high redox capacitance and fast charge transfer capability, which significantly enhanced the performance of the sodium ion-selective electrode. A good Nernstian response with a slope of 52.4 mV/decade in the linear range from 10−4–1 M of NaCl was observed. The stability of the electrical potential of the new solid contact was tested by chronopotentiometry, and the capacitance of the electrode was 154 ± 4 µF. The response stability in terms of potential drift was excellent (1.3 µV/h for 20 h of continuous measurement. The ChPBN proved to be an efficient solid contact to enhance the potential stability of the all-solid-state ion-selective electrode.

The impact of selected planned motorways and expressways on the potential accessibility of the Polish-Slovak borderland with respect to tourism development

Directory of Open Access Journals (Sweden)

Michniak Daniel

2015-03-01

Full Text Available Further tourism development in the Polish-Slovak borderland, as well as its overall economic development, depends on the construction of a motorway and expressway network. This paper analyses the impact of selected planned motorways and expressways (D1, A4, D3/S69, R1/R3/S7, and R4/S19 on the potential accessibility of the Polish-Slovak borderland with respect to the development of tourism. The most important investment project in Slovakia is the completion of the (started D1 motorway. The R4/S19 and the R1/R3/S7 expressways and the D3 motorway/S69 expressway are expected to contribute to improved cross-border connections.

A Fuzzy Decision Making Approach for Supplier Selection in Healthcare Industry

OpenAIRE

Zeynep Sener; Mehtap Dursun

2014-01-01

Supplier evaluation and selection is one of the most important components of an effective supply chain management system. Due to the expanding competition in healthcare, selecting the right medical device suppliers offers great potential for increasing quality while decreasing costs. This paper proposes a fuzzy decision making approach for medical supplier selection. A real-world medical device supplier selection problem is presented to illustrate the application of the proposed decision meth...

Project Selection for NASA's R&D Programs

Science.gov (United States)

Jones, Harry

2005-01-01

The purpose of NASA s Research and Development (R&D) programs is to provide advanced human support technologies for the Exploration Systems Mission Directorate (ESMD). The new technologies must be sufficiently attractive and proven to be selectable for future missions. This requires identifying promising candidate technologies and advancing them in technology readiness until they are likely options for flight. The R&D programs must select an array of technology development projects, manage them, and either terminate or continue them, so as to maximize the delivered number of potentially usable advanced human support technologies. This paper proposes an effective project selection methodology to help manage NASA R&D project portfolios.

Energy Efficiency Potential in Existing Commercial Buildings: Review of Selected Recent Studies

Energy Technology Data Exchange (ETDEWEB)

Belzer, David B.

2009-04-03

This report reviews six recent studies (from 2002 through 2006) by states and utilities to assess the energy saving potential in existing commercial buildings. The studies cover all or portions of California, Connecticut, Vermont, Colorado, Illinois, and the Pacific Northwest. The studies clearly reveal that lighting remains the single largest and most cost effective end use that can be reduced to save energy. Overall the study indicated that with existing technologies and costs, a reasonable range of economic savings potential in existing commercial buildings is between 10 and 20 percent of current energy use. While not a focus of the study, an additional conclusion is that implementation of commercial building monitoring and controls would also play an important role in the nation’s efforts to improve energy efficiency of existing buildings.

The specific interception potential of soils for radiocesium

International Nuclear Information System (INIS)

Sweeck, L.; Wauters, J.; Valcke, E.; Cremers, A.

1990-01-01

A simple methodology is presented for obtaining the specific interception potential for radiocesium, defined as the product of the number of specific sites times the Cs to K selectivity coefficient in these sites. This procedure is applied to a series of soils from a heavy clay to a podzol soil and it is shown that this interception potential may vary by some two orders of magnitude. On the basis of selectivity values of K and NH 4 -ions for the specific sites, it is demonstrated quantitatively that the specific sites are directly associated with the presence of micaceous clay minerals. In conclusion, a set of equations is developed for predicting the site K D - values of radiocesium on the basis of the specific radiocesium interception potential and the K and NH 4 -concentrations in the soil solution. (author)

On statistical selection in plant breeding

NARCIS (Netherlands)

Dourleijn, C.J.

1993-01-01

The ultimate goal of plant breeding is the development of new varieties. An important phase in the development process is testing and selecting potential new varieties. The varieties are tested by means of experiments at various sites, (sometimes) in several years. The observations from the