WorldWideScience

Sample records for selected technology areas

  1. Technology trends in selected areas

    International Nuclear Information System (INIS)

    Mason, R.

    1990-01-01

    Besides the issues of international consequences of science and technology developments (including information technology, biotechnology, materials technology, nuclear technology, space technology) the following topics were touched only briefly: energy and uses of nuclear power, environmental issues, and matters such as the comprehensive test-ban treaty and the way ahead -more perhaps a phased approach than a single step. The limited time available did not allow considering the role of the United Nations and any other institutional forms in these matters. There is conviction that there was enough historical evidence to suggest that there will be a need for a plurality of institutions, with different geographical, and maybe even political, imperatives. In summary, a conference such as this one at Sendai can offer the United Nations advice on the dynamics of change in sectors of science and technology, of the impact of such changes on matters related to international security - military, economic and the environment. There is belief in the maximum diffusion of science and technology with the minimum discrimination but at the same time dissemination consistent with international security. The value of co-operative efforts in research and development, in the removal of asymmetries in the international system. The removal of such asymmetries would constitute a significant step on the way ahead, to a more just and lasting equilibrium between States

  2. Fabrication of 32Gb/s Electroabsorption Modulated Distributed Feedback Lasers by Selective Area Growth Technology

    International Nuclear Information System (INIS)

    Zhou Dai-Bing; Wang Hui-Tao; Zhang Rui-Kang; Wang Bao-Jun; Bian Jing; An Xin; Lu Dan; Zhao Ling-Juan; Zhu Hong-Liang; Ji Chen; Wang Wei

    2015-01-01

    A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13 mA. The output power exceeds 10 mW at 0 V bias when the injection current of the distributed feedback laser is 100 mA at 25°C. The side mode suppression ratio is over 50 dB. A 32Gb/s eye diagram is measured with a 3.5V pp nonreturn-to-zero pseudorandom modulation signal at −2.3 V bias. A clearly opening eyediagram with a dynamic extinction ratio of 8.01 dB is obtained. (paper)

  3. Analysis of an Interactive Technology Supported Problem-Based Learning STEM Project Using Selected Learning Sciences Interest Areas (SLSIA)

    Science.gov (United States)

    Kumar, David Devraj

    2017-01-01

    This paper reports an analysis of an interactive technology-supported, problem-based learning (PBL) project in science, technology, engineering and mathematics (STEM) from a Learning Sciences perspective using the Selected Learning Sciences Interest Areas (SLSIA). The SLSIA was adapted from the "What kinds of topics do ISLS [International…

  4. Selective Reproductive Technologies

    DEFF Research Database (Denmark)

    Gammeltoft, Tine; Wahlberg, Ayo

    2014-01-01

    From a historical perspective, selective reproduction is nothing new. Infanticide, abandonment, and selective neglect of children have a long history, and the widespread deployment of sterilization and forced abortion in the twentieth century has been well documented. Yet in recent decades select......, discussing how selective reproduction engages with issues of long-standing theoretical concern in anthropology, such as politics, kinship, gender, religion, globalization, and inequality....... (ARTs), what we term selective reproductive technologies (SRTs) are of a more specific nature: Rather than aiming to overcome infertility, they are used to prevent or allow the birth of certain kinds of children. This review highlights anthropological research into SRTs in different parts of the world...

  5. Plutonium focus area: Technology summary

    International Nuclear Information System (INIS)

    1996-03-01

    To ensure research and development programs focus on the most pressing environmental restoration and waste management problems at the U.S. Department of Energy (DOE), the Assistant Secretary for the Office of Environmental Management (EM) established a working group in August 1993 to implement a new approach to research and technology development. As part of this approach, EM developed a management structure and principles that led to creation of specific focus areas. These organizations were designed to focus scientific and technical talent throughout DOE and the national scientific community on major environmental restoration and waste management problems facing DOE. The focus area approach provides the framework for inter-site cooperation and leveraging of resources on common problems. After the original establishment of five major focus areas within the Office of Technology Development (EM-50), the Nuclear Materials Stabilization Task Group (NMSTG, EM-66) followed EM-50's structure and chartered the Plutonium Focus Area (PFA). NMSTG's charter to the PFA, described in detail later in this book, plays a major role in meeting the EM-66 commitments to the Defense Nuclear Facilities Safety Board (DNFSB). The PFA is a new program for FY96 and as such, the primary focus of revision 0 of this Technology Summary is an introduction to the Focus Area; its history, development, and management structure, including summaries of selected technologies being developed. Revision 1 to the Plutonium Focus Area Technology Summary is slated to include details on all technologies being developed, and is currently planned for release in August 1996. The following report outlines the scope and mission of the Office of Environmental Management, EM-60, and EM-66 organizations as related to the PFA organizational structure

  6. Selecting Security Technology Providers

    Science.gov (United States)

    Schneider, Tod

    2009-01-01

    The world of security technology holds great promise, but it is fraught with opportunities for expensive missteps and misapplications. The quality of the security technology consultants and system integrators one uses will have a direct bearing on how well his school masters this complex subject. Security technology consultants help determine…

  7. Defense Technology Area Plan.

    Science.gov (United States)

    1996-05-01

    Concepts for aircraft interior decon • Concepts for wide area/fixed site decon • Supercritical fluid-based decon for sensitive equipment; •Demo enzymatic ...and special purpose clothing; improved closure systems for ensembles; microencapsulated phase change materials for special purpose applications, and...development of microencapsulated phase change materials for heating and cooling in response to extreme temperature changes. Participants in this work are

  8. Innovation investment area: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The mission of Environmental Management`s (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area`s (IIA) two program elements: RDDT&E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation.

  9. Innovation investment area: Technology summary

    International Nuclear Information System (INIS)

    1994-03-01

    The mission of Environmental Management's (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area's (IIA) two program elements: RDDT ampersand E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation

  10. Selective area growth of InAs nanowires from SiO2/Si(1 1 1) templates direct-written by focused helium ion beam technology

    Science.gov (United States)

    Yang, Che-Wei; Chen, Wei-Chieh; Chou, Chieh; Lin, Hao-Hsiung

    2018-02-01

    We report on the selective area growth of InAs nanowires on patterned SiO2/Si (1 1 1) nano-holes, prepared by focused helium ion beam technology. We used a single spot mode, in which the focused helium ion beam was fixed on a single point with a He+-ion dosage, ranging from 1.5 pC to 8 pC, to drill the nano-holes. The smallest hole diameter achieved is ∼8 nm. We found that low He+-ion dosage is able to facilitate the nucleation of (1 1 1)B InAs on the highly mismatched Si, leading to the vertical growth of InAs nanowires (NWs). High He-ion dosage, on the contrary, severely damaged Si surface, resulting in tilted and stripe-like NWs. In addition to titled NW grown from (1 1 1)A InAs domain, a new titled growth direction due to defect induced twinning was observed. Cross-sectional TEM images of vertical NWs show mixed wurtizite (WZ) and zincblende (ZB) phases, while WZ phase dominants. The stacking faults resulting from the phase change is proportional to NW diameter, suggesting that the critical diameter of phase turning is larger than 110 nm, the maximum diameter of our NWs. Period of misfit dislocation at the InAs/Si interface of vertical NW is also found larger than the theoretical value when the diameter of heterointerface is smaller than 50 nm, indicating that the small contact area is able to accommodate the large lattice and thermal mismatch between InAs and Si.

  11. Plutonium focus area. Technology summary

    International Nuclear Information System (INIS)

    1997-09-01

    The Assistant Secretary for the Office of Environmental Management (EM) at the U.S. Department of Energy (DOE) chartered the Plutonium Focus Area (PFA) in October 1995. The PFA open-quotes...provides for peer and technical reviews of research and development in plutonium stabilization activities...close quotes In addition, the PFA identifies and develops relevant research and technology. The purpose of this document is to focus attention on the requirements used to develop research and technology for stabilization, storage, and preparation for disposition of nuclear materials. The PFA Technology Summary presents the approach the PFA uses to identify, recommend, and review research. It lists research requirements, research being conducted, and gaps where research is needed. It also summarizes research performed by the PFA in the traditional research summary format. This document encourages researchers and commercial enterprises to do business with PFA by submitting research proposals or open-quotes white papers.close quotes In addition, it suggests ways to increase the likelihood that PFA will recommend proposed research to the Nuclear Materials Stabilization Task Group (NMSTG) of DOE

  12. Technology strategy for gas technologies; Technology Target Areas; TTA8 Gas Technology

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    TTA8 - Gas technologies points out the various routes Norway can follow to capitalise on the vast resources of natural gas that will be produced in the years to come by developing a strong technology and competence platform. A broad view is taken for the value creation having as basis the continued gas export from NCS to Europe, but also a strong focus on development of gas resources in other parts of the world. The latter can also be seen as part of international positioning for upstream resources and does also include involvements in projects, and export of technology and products. The TTA has structured the analysis into 3 main areas: Gas transport and processing (pipeline, LNG, other); Gas conversion to fuels, chemicals and materials; CO{sub 2} management. In this report, for each of these areas, scenarios based on a gap analysis are presented. One of the key goals has been to identify pacing and emerging technologies for the next 20 years. Based on this, technologies have been mapped according to importance for future competitiveness and technology ambitions. This also includes primary funding responsibilities (public and/or industry). The road map below reflects the key issues in the proposed strategy. The base level of the figure explains areas that will have to be pursued to maintain Norway's role as a key gas and gas technology provider. The second layer represents near term options and possibilities with a reasonable risk profile that could further enhance the Norwegian position given the resources and drive to further develop this industry. As the top layer we have selected some of our 'dreams', what we may achieve if a progressive approach is followed with a strongly innovation based policy. It is acknowledged by the TTA that Norway cannot be a leading technology player in all aspects of the gas value chain. For some technologies we should be an active player and developer, whilst for other technologies we should become a competent buyer and user. This

  13. Technology strategy for gas technologies; Technology Target Areas; TTA8 Gas Technology

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    TTA8 - Gas technologies points out the various routes Norway can follow to capitalise on the vast resources of natural gas that will be produced in the years to come by developing a strong technology and competence platform. A broad view is taken for the value creation having as basis the continued gas export from NCS to Europe, but also a strong focus on development of gas resources in other parts of the world. The latter can also be seen as part of international positioning for upstream resources and does also include involvements in projects, and export of technology and products. The TTA has structured the analysis into 3 main areas: Gas transport and processing (pipeline, LNG, other); Gas conversion to fuels, chemicals and materials; CO{sub 2} management. In this report, for each of these areas, scenarios based on a gap analysis are presented. One of the key goals has been to identify pacing and emerging technologies for the next 20 years. Based on this, technologies have been mapped according to importance for future competitiveness and technology ambitions. This also includes primary funding responsibilities (public and/or industry). The road map below reflects the key issues in the proposed strategy. The base level of the figure explains areas that will have to be pursued to maintain Norway's role as a key gas and gas technology provider. The second layer represents near term options and possibilities with a reasonable risk profile that could further enhance the Norwegian position given the resources and drive to further develop this industry. As the top layer we have selected some of our 'dreams', what we may achieve if a progressive approach is followed with a strongly innovation based policy. It is acknowledged by the TTA that Norway cannot be a leading technology player in all aspects of the gas value chain. For some technologies we should be an active player and developer, whilst for other technologies we should become a competent buyer

  14. Selection of material balance areas and item control areas

    International Nuclear Information System (INIS)

    1975-04-01

    Section 70.58, ''Fundamental Nuclear Material Controls,'' of 10 CFR Part 70, ''Special Nuclear Material,'' requires certain licensees authorized to possess more than one effective kilogram of special nuclear material to establish Material Balance Areas (MBAs) or Item Control Areas (ICAs) for the physical and administrative control of nuclear materials. This section requires that: (1) each MBA be an identifiable physical area such that the quantity of nuclear material being moved into or out of the MBA is represented by a measured value; (2) the number of MBAs be sufficient to localize nuclear material losses or thefts and identify the mechanisms; (3) the custody of all nuclear material within an MBA or ICA be the responsibility of a single designated individual; and (4) ICAs be established according to the same criteria as MBAs except that control into and out of such areas would be by item identity and count for previously determined special nuclear material quantities, the validity of which must be ensured by tamper-safing unless the items are sealed sources. This guide describes bases acceptable to the NRC staff for the selection of material balance areas and item control areas. (U.S.)

  15. Aerosol size characteristics in selected working areas

    International Nuclear Information System (INIS)

    Ahmed, K.

    1984-05-01

    This report presents the work done to study the aerosol activity size distributions and their respirable fractions in some selected areas of the Juelich Nuclear Research Center. Anderson cascade impactors were used to find the aerodynamic size ranges of the airborne particles for subsequent analysis of activity associated with each size group. The aerosols were found to follow in general log-normal distributions in the hot cells with values of AMAD between 5 and 10 μm. Measurements in the AVR containment and decontamination laboratory in Uranit GmbH showed deviations from log-normal distribution. In the waste press area the distribution is sometimes log-normal and sometimes not, depending upon the origin of waste. The values of AMAD are in the range of 2 to 4 μm in these areas. The respirable fractions were calculated using ACGIH definition for respirable dust to be < 25% in hot cells and < 60% in other areas. Pulmonary depositions according to ICRP model were < 10% and < 15% respectively. (orig./HP)

  16. Engineering Research, Development and Technology, FY95: Thrust area report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through their collaboration with US industry in pursuit of the most cost-effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where they can establish unique competencies, and (2) conduct high-quality research and development to enhance their capabilities and establish themselves as the world leaders in these technologies. To focus Engineering`s efforts, technology thrust areas are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1995. The report provides timely summaries of objectives methods, and key results from eight thrust areas: computational electronics and electromagnetics; computational mechanics; microtechnology; manufacturing technology; materials science and engineering; power conversion technologies; nondestructive evaluation; and information engineering.

  17. Engineering research, development and technology: Thrust area report FY 91

    International Nuclear Information System (INIS)

    1991-01-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence, Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) conduct high quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. The thrust area leader is also responsible for carrying out the work that follows from the Engineering Research, Development, and Technology Program so that the results can be applied as early as possible to the needs of LLNL programs. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year, 1991. Its intent is to provide timely summaries of objectives, theories, methods, and results

  18. Selection of Technology in Global Manufacturing Industries

    DEFF Research Database (Denmark)

    Bruun, Peter

    1997-01-01

    not work well. The host country's business and cultural environment must be taken into account in designing a production system which requires attention to the management elements of technology transfer. This paper presents a model for transfer of manufacturing technology to a foreign site based......Transferring a manufacturing system to another country has proven to be problematic for most multinational firms. Selection of the appropriate production process and technology is a critical decision as transplantation of an existing system from another country without adaptation usually does...... on a sociotechnical system approach. It views the decisions for selecting and implementing a production system as a five stage process. The first step is determining the strategic goals of the foreign plant followed by selection of the production process and manufacturing system types. The last stages involve...

  19. Technology meets research 60 years of CERN technology : selected highlights

    CERN Document Server

    Taylor, Thomas; Treille, Daniel; Wenninger, Horst

    2017-01-01

    "Big" science and advanced technology are known to cross-fertilize. This book emphasizes the interplay between particle physics and technology at CERN that has led to breakthroughs in both research and technology over the laboratory's first 60 years. The innovations, often the work of individuals or by small teams, are illustrated with highlights describing selected technologies from the domains of accelerators and detectors. The book also presents the framework and conditions prevailing at CERN that enabled spectacular advances in technology and contributed to propel the European organization into the league of leading research laboratories in the world. While the book is specifically aimed at providing information for the technically interested general public, more expert readers may also appreciate the broad variety of subjects presented. Ample references are given for those who wish to further explore a given topic.

  20. Thrust Area Report, Engineering Research, Development and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R. T.

    1997-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through our collaboration with U.S. industry in pursuit of the most cost- effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where we can establish unique competencies, and (2) conduct high-quality research and development to enhance our capabilities and establish ourselves as the world leaders in these technologies. To focus Engineering`s efforts technology {ital thrust areas} are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1996. The report provides timely summaries of objectives, methods, and key results from eight thrust areas: Computational Electronics and Electromagnetics; Computational Mechanics; Microtechnology; Manufacturing Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; and Information Engineering. Readers desiring more information are encouraged to contact the individual thrust area leaders or authors. 198 refs., 206 figs., 16 tabs.

  1. Landfill stabilization focus area: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    Landfills within the DOE Complex as of 1990 are estimated to contain 3 million cubic meters of buried waste. The DOE facilities where the waste is predominantly located are at Hanford, the Savannah River Site (SRS), the Idaho National Engineering Laboratory (INEL), the Los Alamos National Laboratory (LANL), the Oak Ridge Reservation (ORR), the Nevada Test Site (NTS), and the Rocky Flats Plant (RFP). Landfills include buried waste, whether on pads or in trenches, sumps, ponds, pits, cribs, heaps and piles, auger holes, caissons, and sanitary landfills. Approximately half of all DOE buried waste was disposed of before 1970. Disposal regulations at that time permitted the commingling of various types of waste (i.e., transuranic, low-level radioactive, hazardous). As a result, much of the buried waste throughout the DOE Complex is presently believed to be contaminated with both hazardous and radioactive materials. DOE buried waste typically includes transuranic-contaminated radioactive waste (TRU), low-level radioactive waste (LLW), hazardous waste per 40 CFR 26 1, greater-than-class-C waste per CFR 61 55 (GTCC), mixed TRU waste, and mixed LLW. The mission of the Landfill Stabilization Focus Area is to develop, demonstrate, and deliver safer,more cost-effective and efficient technologies which satisfy DOE site needs for the remediation and management of landfills. The LSFA is structured into five technology areas to meet the landfill remediation and management needs across the DOE complex. These technology areas are: assessment, retrieval, treatment, containment, and stabilization. Technical tasks in each of these areas are reviewed.

  2. Landfill stabilization focus area: Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    Landfills within the DOE Complex as of 1990 are estimated to contain 3 million cubic meters of buried waste. The DOE facilities where the waste is predominantly located are at Hanford, the Savannah River Site (SRS), the Idaho National Engineering Laboratory (INEL), the Los Alamos National Laboratory (LANL), the Oak Ridge Reservation (ORR), the Nevada Test Site (NTS), and the Rocky Flats Plant (RFP). Landfills include buried waste, whether on pads or in trenches, sumps, ponds, pits, cribs, heaps and piles, auger holes, caissons, and sanitary landfills. Approximately half of all DOE buried waste was disposed of before 1970. Disposal regulations at that time permitted the commingling of various types of waste (i.e., transuranic, low-level radioactive, hazardous). As a result, much of the buried waste throughout the DOE Complex is presently believed to be contaminated with both hazardous and radioactive materials. DOE buried waste typically includes transuranic-contaminated radioactive waste (TRU), low-level radioactive waste (LLW), hazardous waste per 40 CFR 26 1, greater-than-class-C waste per CFR 61 55 (GTCC), mixed TRU waste, and mixed LLW. The mission of the Landfill Stabilization Focus Area is to develop, demonstrate, and deliver safer,more cost-effective and efficient technologies which satisfy DOE site needs for the remediation and management of landfills. The LSFA is structured into five technology areas to meet the landfill remediation and management needs across the DOE complex. These technology areas are: assessment, retrieval, treatment, containment, and stabilization. Technical tasks in each of these areas are reviewed

  3. Selection of technologies for municipal wastewater treatment

    Directory of Open Access Journals (Sweden)

    Juan Pablo Rodríguez Miranda

    2015-11-01

    Full Text Available In water environmental planning in watersheds should contain aspects for the decontamination of receiving water body, therefore the selection of the treatment plants municipal wastewater in developing countries, you should consider aspects of the typical composition raw wastewater pollutant removal efficiency by technology, performance indicators for technology, environmental aspects of localization and spatial localization strategy. This methodology is built on the basis of technical, economic and environmental attributes, such as a tool for decision making future investments in treatment plants municipal wastewater with multidisciplinary elements.

  4. Promoting exports in the energy technology area

    International Nuclear Information System (INIS)

    Iten, R.; Oettli, B.; Jochem, E.; Mannsbart, W.

    2001-01-01

    This report for the Swiss Federal Office of Energy (SFOE) examines the position of Switzerland as a leader in the investment goods markets for energy-efficiency products and for technologies for using renewable forms of energy. The report quotes figures for exports in these areas and discusses the difficulty of extracting useful data on these products from normal statistical data. Analyses made by a group of experts from the export-oriented technology field, energy service providers and representatives of export promotion institutions are presented and figures are quoted for various product categories. Factors promoting the competitiveness of Swiss products are discussed as well as those impeding it. An analysis of export potential is presented and measures to promote export are discussed. The report also discusses the aids and promotion activities that are considered necessary by companies in the field and the macro-economic perspectives of increased export promotion

  5. Selecting appropriate technology for hydrogen production

    International Nuclear Information System (INIS)

    Tamhankar, S.S.

    2004-01-01

    'Full text:' Technologies for the production of synthesis gas (H2 + CO), a precursor to hydrogen, from a variety of fossil fuels are well known in industrial applications at relatively large scale. These include Steam Reforming (SR), Auto-Thermal Reforming (ATR) and Partial Oxidation (POX). A particular technology is selected based on the feed type and the desired products. Steam reforming is a mature technology, and is most prevalent for hydrogen production because of its high efficiency. However, at the smaller scale, the capital cost becomes a more significant factor, and a substantial reduction in this cost is necessary to meet the overall H2 gas cost targets, such as that stated by DOE ($1.50/kg). In developing small-scale H2 technologies, often, incremental improvements are incorporated. While useful, these are not adequate for the desired cost reduction. Also, for effective cost reduction, the whole system, including production, purification and associated equipment needs to be evaluated; cost reduction in just one of the units is not sufficient. This paper provides a critical assessment of the existing as well as novel technology options, specifically targeted at small scale H2 production. The technology options are evaluated to clearly point out which may or may not work and why. (author)

  6. Mixed waste focus area alternative technologies workshop

    International Nuclear Information System (INIS)

    Borduin, L.C.; Palmer, B.A.; Pendergrass, J.A.

    1995-01-01

    This report documents the Mixed Waste Focus Area (MWFA)-sponsored Alternative Technology Workshop held in Salt Lake City, Utah, from January 24--27, 1995. The primary workshop goal was identifying potential applications for emerging technologies within the Options Analysis Team (OAT) ''wise'' configuration. Consistent with the scope of the OAT analysis, the review was limited to the Mixed Low-Level Waste (MLLW) fraction of DOE's mixed waste inventory. The Los Alamos team prepared workshop materials (databases and compilations) to be used as bases for participant review and recommendations. These materials derived from the Mixed Waste Inventory Report (MWIR) data base (May 1994), the Draft Site Treatment Plan (DSTP) data base, and the OAT treatment facility configuration of December 7, 1994. In reviewing workshop results, the reader should note several caveats regarding data limitations. Link-up of the MWIR and DSTP data bases, while representing the most comprehensive array of mixed waste information available at the time of the workshop, requires additional data to completely characterize all waste streams. A number of changes in waste identification (new and redefined streams) occurred during the interval from compilation of the data base to compilation of the DSTP data base with the end result that precise identification of radiological and contaminant characteristics was not possible for these streams. To a degree, these shortcomings compromise the workshop results; however, the preponderance of waste data was linked adequately, and therefore, these analyses should provide useful insight into potential applications of alternative technologies to DOE MLLW treatment facilities

  7. Brazil research in selected scientific areas

    DEFF Research Database (Denmark)

    Ingwersen, Peter

    2009-01-01

      The paper analyses the general development of research in Brazil, 1981-2005 and compares to Mexico, Republic of South Africa (RSA) and the world. Publications from 15 research areas and their citations are analyzed for the three countries covering two five-year periods 1996-2005. The paper appl...

  8. practical common weight maximin approach for technology selection

    African Journals Online (AJOL)

    2014-06-30

    Jun 30, 2014 ... Keywords: Technology selection, Robot selection, Maximin .... manufacturers have consequently oriented the researchers to ..... value judgements in data envelopment analysis: Evolution, development and future directions',.

  9. Learning with and about Technology: A Middle School Nature Area.

    Science.gov (United States)

    Fetterman, David

    1998-01-01

    Discussion of learning with technology as well as about technology focuses on a case study of a middle school nature area that uses technology to extend accessibility of environmental data. Highlights include the design of Web pages to describe the nature area; file sharing software; and the use of videoconferencing. (LRW)

  10. Science and Technology Business Area Strategic Plan

    National Research Council Canada - National Science Library

    Paul, Richard

    2000-01-01

    The S&T Business Area Strategic Plan has been updated to include lessons learned over the last two years, identifies areas that need to be reviewed further, addresses business opportunities and threats...

  11. Selection criteria for wastewater treatment technologies to protect drinking water.

    Science.gov (United States)

    von Sperling, M

    2000-01-01

    The protection of water bodies used as sources for drinking water is intimately linked to the adoption of adequate technologies for the treatment of the wastewater generated in the catchment area. The paper presents a general overview of the main technologies used for the treatment of domestic sewage, with a special emphasis on developing countries, and focussing on the main parameters of interest, such as BOD, coliforms and nutrients. A series of tables, figures and charts that can be used for the preliminary selection of treatment technologies is presented. The systems analysed are: stabilisation ponds, activated sludge, trickling filters, anaerobic systems and land disposal. Within each system, the main process variants are covered. Two summary tables are presented, one for quantitative analysis, including easily usable information based on per capita values (US$/cap, Watts/cap, m2 area/cap, m3 sludge/cap), and another for a qualitative comparison among the technologies, based on a one-to-five-star scoring system. The recent trend in tropical countries in the use of UASB (Upflow Anaerobic Sludge Blanket) reactors is also discussed.

  12. Partner Selection in Technological Licensing Agreements

    DEFF Research Database (Denmark)

    Laursen, Keld; Trombini, Giulia

    This paper investigates the matching of seller and buyer firms in the market for technology licensing. By combining organizational learning theory with the industrial organization approach, we propose a matching model in which technological similarities in terms of relatedness and familiarity work...... that is technologically unrelated, ex ante familiarity with the licensors’ technology is required. We contend also that there is interdependence between technological learning and market competition: if partners are in the same product markets, the likelihood of technology license contractual partnerships decreases...

  13. Low-level radioactive waste technology: a selected, annotated bibliography

    International Nuclear Information System (INIS)

    Fore, C.S.; Carrier, R.F.; Brewster, R.H.; Hyder, L.K.; Barnes, K.A.

    1981-10-01

    This annotated bibliography of 416 references represents the third in a series to be published by the Hazardous Materials Information Center containing scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on disposal site, environmental transport, and waste treatment studies as well as general reviews on the subject. The publication covers both domestic and foreign literature for the period 1951 to 1981. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology, and Site Resources; Regulatory and Economic Aspects; Social Aspects; Transportation Technology; Waste Production; and Waste Treatment. Entries in each of the chapters are further classified as a field study, laboratory study, theoretical study, or general overview involving one or more of these research areas

  14. Selection of City Distribution Locations in Urbanized Areas

    NARCIS (Netherlands)

    Bu, L.; Van Duin, J.H.R.; Wiegmans, B.; Luo, Z.; Yin, C.

    2012-01-01

    This paper aims to apply a preference method for selecting optimal city distribution reloading locations in urbanized areas. The focus in the optimization is on trucks entering the urbanized area where the truck can choose between at least two locations with similar distances determined by a

  15. Decontamination and decommissioning focus area. Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    This report presents details of the facility deactivation, decommissioning, and material disposition research for development of new technologies sponsored by the Department of Energy. Topics discussed include; occupational safety, radiation protection, decontamination, remote operated equipment, mixed waste processing, recycling contaminated metals, and business opportunities

  16. Proposal for Land Consolidation Project Solutions for Selected Problem Areas

    Science.gov (United States)

    Wojcik-Len, Justyna; Strek, Zanna

    2017-12-01

    One of the economic tools for supporting agricultural policy are the activities implemented under the Rural Development Program (RDP). By encouraging agricultural activities and creating equal opportunities for development of farms, among others in areas with unfavourable environmental conditions characterized by low productivity of soils exposed to degradation, decision makers can contribute to improving the spatial structure of rural areas. In Poland, one of the major concerns are agricultural problem areas (regions). In view of this situation, the aim of this article was to characterize the problem areas in question and propose land consolidation project solutions for selected fragments of those areas. This paper presents the results of a review of literature and an analysis of geodetic and cartographic data regarding the problem areas. The process of land consolidation, which is one of the technical and legal instruments supporting the development of rural areas, was characterized. The study allowed the present authors to establish criteria for selecting agricultural problem areas for land consolidation. To develop a proposal for rational management of the problem areas, key general criteria (location, topography, soil quality and usefulness) and specific criteria were defined and assigned weights. A conception of alternative development of the agricultural problem areas was created as part of a land consolidation project. The results were used to create a methodology for the development of agricultural problem areas to be employed during land consolidation in rural areas. Every agricultural space includes areas with unfavourable environmental and soil conditions determined by natural or anthropogenic factors. Development of agricultural problem areas through land consolidation should take into account the specific functions assigned to these areas in land use plans, as well as to comply with legal regulations.

  17. Technology Area Roadmap for In-Space Propulsion Technologies

    Science.gov (United States)

    Johnson, Les; Meyer, Michael; Palaszewski, Bryan; Coote, David; Goebel, Dan; White, Harold

    2012-01-01

    The exponential increase of launch system size.and cost.with delta-V makes missions that require large total impulse cost prohibitive. Led by NASA fs Marshall Space Flight Center, a team from government, industry, and academia has developed a flight demonstration mission concept of an integrated electrodynamic (ED) tethered satellite system called PROPEL: \\Propulsion using Electrodynamics.. The PROPEL Mission is focused on demonstrating a versatile configuration of an ED tether to overcome the limitations of the rocket equation, enable new classes of missions currently unaffordable or infeasible, and significantly advance the Technology Readiness Level (TRL) to an operational level. We are also focused on establishing a far deeper understanding of critical processes and technologies to be able to scale and improve tether systems in the future. Here, we provide an overview of the proposed PROPEL mission. One of the critical processes for efficient ED tether operation is the ability to inject current to and collect current from the ionosphere. Because the PROPEL mission is planned to have both boost and deboost capability using a single tether, the tether current must be capable of flowing in both directions and at levels well over 1 A. Given the greater mobility of electrons over that of ions, this generally requires that both ends of the ED tether system can both collect and emit electrons. For example, hollow cathode plasma contactors (HCPCs) generally are viewed as state-of-the-art and high TRL devices; however, for ED tether applications important questions remain of how efficiently they can operate as both electron collectors and emitters. Other technologies will be highlighted that are being investigated as possible alternatives to the HCPC such as Solex that generates a plasma cloud from a solid material (Teflon) and electron emission (only) technologies such as cold-cathode electron field emission or photo-electron beam generation (PEBG) techniques

  18. Risk calculations in the manufacturing technology selection process

    DEFF Research Database (Denmark)

    Farooq, S.; O'Brien, C.

    2010-01-01

    Purpose - The purpose of this paper is to present result obtained from a developed technology selection framework and provide a detailed insight into the risk calculations and their implications in manufacturing technology selection process. Design/methodology/approach - The results illustrated...... in the paper are the outcome of an action research study that was conducted in an aerospace company. Findings - The paper highlights the role of risk calculations in manufacturing technology selection process by elaborating the contribution of risk associated with manufacturing technology alternatives...... in the shape of opportunities and threats in different decision-making environments. Practical implications - The research quantifies the risk associated with different available manufacturing technology alternatives. This quantification of risk crystallises the process of technology selection decision making...

  19. Energy technology monitoring - New areas and in-depth investigations

    International Nuclear Information System (INIS)

    Rigassi, R.; Eicher, H.; Steiner, P.; Ott, W.

    2005-01-01

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) presents the results of a project that examined long-term trends in the energy technology area in order to provide information that is to form the basis for political action and the distribution of energy research funding in Switzerland. Energy-technology areas examined include variable-speed electrical drives, ventilation systems for low-energy-consumption buildings, membrane technology and the use of plastics in lightweight automobiles. Examples are quoted and the current state of the appropriate technologies and market aspects are examined. Also, the potential and future developments in the areas listed are looked at. The consequences for energy policy and future developments in the technology-monitoring area are considered

  20. SUSTAINABILITY LOGISTICS BASING SCIENCE AND TECHNOLOGY OBJECTIVE DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT

    Science.gov (United States)

    2018-03-22

    BASING SCIENCE AND TECHNOLOGY OBJECTIVE – DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT by Gregg J. Gildea Paul D. Carpenter Benjamin J...Campbell William F. Harris* Michael A. McCluskey** and José A. Miletti*** *General Dynamics Information Technology Fairfax, VA 22030 **Maneuver...SCIENCE AND TECHNOLOGY OBJECTIVE – DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

  1. Selection criteria for forested natural areas in New England, USA

    Science.gov (United States)

    William B. Leak; Mariko Yamasaki; Marie-Louise Smith; David T. Funk

    1994-01-01

    The selection of forested natural areas for research and educational purposes is discussed. Five factors are important: sufficient size; representation of typical communities and sites; documented disturbance histories; acceptable current condition in terms of age, tree size, and successional stage; and administrative feasibility.

  2. Selection of industrial robots using the Polygons area method

    Directory of Open Access Journals (Sweden)

    Mortaza Honarmande Azimi

    2014-08-01

    Full Text Available Selection of robots from the several proposed alternatives is a very important and tedious task. Decision makers are not limited to one method and several methods have been proposed for solving this problem. This study presents Polygons Area Method (PAM as a multi attribute decision making method for robot selection problem. In this method, the maximum polygons area obtained from the attributes of an alternative robot on the radar chart is introduced as a decision-making criterion. The results of this method are compared with other typical multiple attribute decision-making methods (SAW, WPM, TOPSIS, and VIKOR by giving two examples. To find similarity in ranking given by different methods, Spearman’s rank correlation coefficients are obtained for different pairs of MADM methods. It was observed that the introduced method is in good agreement with other well-known MADM methods in the robot selection problem.

  3. Assessment of selected furnace technologies for RWMC waste

    International Nuclear Information System (INIS)

    Batdorf, J.; Gillins, R.; Anderson, G.L.

    1992-03-01

    This report provides a description and initial evaluation of five selected thermal treatment (furnace) technologies, in support of earlier thermal technologies scoping work for application to the Idaho National Engineering Laboratory Radioactive Waste Management Complex (RWMC) buried wastes. The cyclone furnace, molten salt processor, microwave melter, ausmelt (fuel fired lance) furnace, and molten metal processor technologies are evaluated. A system description and brief development history are provided. The state of development of each technology is assessed, relative to treatment of RWMC buried waste

  4. Selection method of terrain matching area for TERCOM algorithm

    Science.gov (United States)

    Zhang, Qieqie; Zhao, Long

    2017-10-01

    The performance of terrain aided navigation is closely related to the selection of terrain matching area. The different matching algorithms have different adaptability to terrain. This paper mainly studies the adaptability to terrain of TERCOM algorithm, analyze the relation between terrain feature and terrain characteristic parameters by qualitative and quantitative methods, and then research the relation between matching probability and terrain characteristic parameters by the Monte Carlo method. After that, we propose a selection method of terrain matching area for TERCOM algorithm, and verify the method correctness with real terrain data by simulation experiment. Experimental results show that the matching area obtained by the method in this paper has the good navigation performance and the matching probability of TERCOM algorithm is great than 90%

  5. Siemens technology transfer and cooperation in the nuclear fuel area

    International Nuclear Information System (INIS)

    Holley, H.-P.; Fuchs, J. H.; Rothenbuecher, R. A.

    1997-01-01

    Siemens is a full-range supplier in the area of nuclear power generation with broad experience and activities in the field of nuclear fuel. Siemens has developed advanced fuel technology for all types fuel assemblies used throughout the world and has significant experience worldwide in technology transfer in the field of nuclear fuel. Technology transfer and cooperation has ranged between the provision of mechanical design advice for a specific fuel design and the erection of complete fabrication plants for commercial operation in 3 countries. In the following the wide range of Siemens' technology transfer activities for both fuel design and fuel fabrication technologies are shown

  6. Reactor technology assessment and selection utilizing systems engineering approach

    Science.gov (United States)

    Zolkaffly, Muhammed Zulfakar; Han, Ki-In

    2014-02-01

    The first Nuclear power plant (NPP) deployment in a country is a complex process that needs to consider technical, economic and financial aspects along with other aspects like public acceptance. Increased interest in the deployment of new NPPs, both among newcomer countries and those with expanding programs, necessitates the selection of reactor technology among commercially available technologies. This paper reviews the Systems Decision Process (SDP) of Systems Engineering and applies it in selecting the most appropriate reactor technology for the deployment in Malaysia. The integrated qualitative and quantitative analyses employed in the SDP are explored to perform reactor technology assessment and to select the most feasible technology whose design has also to comply with the IAEA standard requirements and other relevant requirements that have been established in this study. A quick Malaysian case study result suggests that the country reside with PWR (pressurized water reactor) technologies with more detailed study to be performed in the future for the selection of the most appropriate reactor technology for Malaysia. The demonstrated technology assessment also proposes an alternative method to systematically and quantitatively select the most appropriate reactor technology.

  7. Historical evolution and technology impact in the area of the health and the nursing

    Directory of Open Access Journals (Sweden)

    Daniela Couto Carvalho Barra

    2006-12-01

    Full Text Available This study it is of exploratory and descriptive character. One is about bibliographical research carried through on the basis of the analysis and interpretation of articles, dissertations and thesis produced between 1994 the 2004. We investigate the contributions of researchers that had focused the historical evolution of the technology in the area of the health and the nursing. Of a total of 39 articles, 03 selected dissertations and 02 thesis, we construct for analysis two categories: Technological evolution in the area of the health: hard technology e; Technological evolution in the Nursing: technology leavening and has led. This study it allowed to affirm us that a critical and reflexive position is necessary on the use of the technology, searching an adequacy to the necessities of the patient as a whole and that, independent of the use of the high technology, fits to the nurse to keep this together humanized presence to the sick people.

  8. Photonic technology revolution influence on the defence area

    Science.gov (United States)

    Galas, Jacek; Litwin, Dariusz; Błocki, Narcyz; Daszkiewicz, Marek

    2017-10-01

    Revolutionary progress in the photonic technology provides the ability to develop military systems of new properties not possible to obtain with the use of classical technologies. In recent years, this progress has resulted in developing advanced, complex, multifunctional and relatively cheap Photonic Integrated Circuits (PIC) or Hybrid Photonics Circuits (HPC) built of a collection of standardized optical, optoelectronic and photonic components. This idea is similar to the technology of Electronic Integrated Circuits, which has revolutionized the microelectronic market. The novel approach to photonic technology is now revolutionizing the photonics' market. It simplifies the photonics technology and enables creation of technological centers for designing, development and production of advanced optical and photonic systems in the EU and other countries. This paper presents some selected photonic technologies and their impact on such defense systems like radars, radiolocation, telecommunication, and radio-communication systems.

  9. Performance-Based Technology Selection Filter description report

    International Nuclear Information System (INIS)

    O'Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

    1992-05-01

    A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL)

  10. Performance-Based Technology Selection Filter description report

    Energy Technology Data Exchange (ETDEWEB)

    O' Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

    1992-05-01

    A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

  11. Selecting cost-effective areas for restoration of ecosystem services.

    Science.gov (United States)

    Adame, M F; Hermoso, V; Perhans, K; Lovelock, C E; Herrera-Silveira, J A

    2015-04-01

    Selection of areas for restoration should be based on cost-effectiveness analysis to attain the maximum benefit with a limited budget and overcome the traditional ad hoc allocation of funds for restoration projects. Restoration projects need to be planned on the basis of ecological knowledge and economic and social constraints. We devised a novel approach for selecting cost-effective areas for restoration on the basis of biodiversity and potential provision of 3 ecosystem services: carbon storage, water depuration, and coastal protection. We used Marxan, a spatial prioritization tool, to balance the provision of ecosystem services against the cost of restoration. We tested this approach in a mangrove ecosystem in the Caribbean. Our approach efficiently selected restoration areas that at low cost were compatible with biodiversity targets and that maximized the provision of one or more ecosystem services. Choosing areas for restoration of mangroves on the basis carbon storage potential, largely guaranteed the restoration of biodiversity and other ecosystem services. © 2014 Society for Conservation Biology.

  12. Predicting artificailly drained areas by means of selective model ensemble

    DEFF Research Database (Denmark)

    Møller, Anders Bjørn; Beucher, Amélie; Iversen, Bo Vangsø

    . The approaches employed include decision trees, discriminant analysis, regression models, neural networks and support vector machines amongst others. Several models are trained with each method, using variously the original soil covariates and principal components of the covariates. With a large ensemble...... out since the mid-19th century, and it has been estimated that half of the cultivated area is artificially drained (Olesen, 2009). A number of machine learning approaches can be used to predict artificially drained areas in geographic space. However, instead of choosing the most accurate model....... The study aims firstly to train a large number of models to predict the extent of artificially drained areas using various machine learning approaches. Secondly, the study will develop a method for selecting the models, which give a good prediction of artificially drained areas, when used in conjunction...

  13. Selecting Advanced Software Technology in Two Small Manufacturing Enterprises

    National Research Council Canada - National Science Library

    Anderson, Bill; Estrin, Len; Buhman, Charles

    2004-01-01

    .... These challenges may include the lack of awareness of the specific technologies and commercial products available, the lack of ability to select the appropriate product, and the lack of skill sets...

  14. Selected-area diffraction and spectroscopy in LEEM and PEEM

    International Nuclear Information System (INIS)

    Tromp, R.M.

    2012-01-01

    This paper addresses the effects of spherical and chromatic aberration of the objective lens, as well as chromatic dispersion of magnetic prism arrays, on the ability to perform selected area Low Energy Electron Diffraction, as well as (Angle Resolved) Photo Electron Spectroscopy experiments in today's advanced cathode lens microscopy instruments. -- Highlights: ► Aberrations of the cathode lens affect SA diffraction and spectroscopy experiments in LEEM/PEEM. ► In LEEM the problem can be overcome by inserting the SA aperture in the illuminating path. ► In PEEM for selected areas smaller than 2–4 μm aberration correction becomes a necessity. ► Chromatic dispersion in the magnetic prism array commonly can be neglected in most cases.

  15. Engineering Research and Development and Technology thrust area report FY92

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R.T.; Minichino, C. [eds.

    1993-03-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) to conduct high-quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year 1992. Its intent is to provide timely summaries of objectives, theories, methods, and results. The nine thrust areas for this fiscal year are: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Emerging Technologies; Fabrication Technology; Materials Science and Engineering; Microwave and Pulsed Power; Nondestructive Evaluation; and Remote Sensing and Imaging, and Signal Engineering.

  16. Engineering Research and Development and Technology thrust area report FY92

    International Nuclear Information System (INIS)

    Langland, R.T.; Minichino, C.

    1993-03-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) to conduct high-quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year 1992. Its intent is to provide timely summaries of objectives, theories, methods, and results. The nine thrust areas for this fiscal year are: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Emerging Technologies; Fabrication Technology; Materials Science and Engineering; Microwave and Pulsed Power; Nondestructive Evaluation; and Remote Sensing and Imaging, and Signal Engineering

  17. An analysis of CDTN performance in the reactors technology area

    International Nuclear Information System (INIS)

    Pinheiro, R.B.

    1985-01-01

    The author makes an analysis of CDTN (Centro de Desenvolvimento da Tecnologia Nuclear) performance in the reactors technology area, showing difficulties and failures, but emphasizing the particular competence and capacity acquired in this area, as for example: the capacity in codes and methods are of neutronic calculations and nuclear projects, experimental thermohydraulic program, tests services in components and the others. (C.M.) [pt

  18. Technology geography: a new area of scientific inquiry

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2003-01-01

    Operations management, international management, public policy and economic geography are four scientific areas, which come together in the study of international technology transfer. This paper shows how each of these four areas has its own central issues but also have specific parts that are

  19. Enzyme technology: Key to selective biorefining

    DEFF Research Database (Denmark)

    Meyer, Anne S.

    2014-01-01

    to the reaction is a unique trait of enzyme catalysis. Since enzyme selectivity means that a specific reaction is catalysed between particular species to produce definite products, enzymes are particularly fit for converting specific compounds in mixed biomass streams. Since enzymes are protein molecules...... their rational use in biorefinery processes requires an understanding of the basic features of enzymes and reaction traits with respect to specificity, kinetics, reaction optima, stability and structure-function relations – we are now at a stage where it is possible to use nature’s enzyme structures as starting...... point and then improve the functional traits by targeted mutation of the protein. The talk will display some of our recent hypotheses related to enzyme action, recently obtained results within knowledge-based enzyme improvements as well as cast light on research methods used in optimizing enzyme...

  20. Information Literacy Education on College of Technology at Kyushu Area

    Science.gov (United States)

    Kozono, Kazutake; Ikeda, Naomitsu; Irie, Hiroki; Fujimoto, Yoichi; Oshima, Shunsuke; Murayama, Koichi; Taguchi, Hirotsugu

    Recently, the importance of an engineering education increases by the development of the information technology (IT) . Development of the information literacy education is important to deal with new IT in the education on college of technology. Our group investigated the current state of information literacy education on college of technology at Kyushu area and the secondary education. In addition, we investigated about the talent whom the industrial world requested. From these investigation results, this paper proposed cooperation with the elementary and secondary education, enhancement of intellectual property education, introduction of information ethics education, introduction of career education and enhancement of PBL to information literacy education on college of technology.

  1. Evaluation of selected sewage sludge gasification technological parameters

    Science.gov (United States)

    Gałko, Grzegorz; Król, Danuta

    2018-02-01

    Evaluation of selected sewage sludge gasification technological parameters was shown in this paper. Degree of carbon conducted in combustible substance and syngas efficiency (technological readiness coefficient) in accordance with equations were calculated. Enthalpy of individual compounds formation and energy balance were calculated in accordance with rule of Hess.

  2. Institutional Distance and Partner Selection in International Technological Alliances

    NARCIS (Netherlands)

    Krammer, Marius

    2013-01-01

    This study posits that institutional distance has a negative influence on partner selection in international technological alliances. Empirical results based on a dataset of firms in the global tire industry confirm that firms prefer technological partners from closer cognitive, normative and

  3. The process of selecting technology development projects: a practical framework

    NARCIS (Netherlands)

    Herps, Joost M.J.; van Mal, Herman H.; Halman, Johannes I.M.; Martens, Jack H.M.; Borsboom, Ron H.M.

    2003-01-01

    In this article a practical framework is proposed, that can be used to organise the activities related to the selection-process of technology development projects. The framework is based upon recent literature and application at DAF Trucks Company. A technology development project has a long way to

  4. The process of selecting technology development projects : a practical framework

    NARCIS (Netherlands)

    Herps, J.M.J.; Mal, van H.H.; Halman, J.I.M.; Martens, J.H.M.; Borsboom, R.H.M.

    2003-01-01

    In this article a practical framework is proposed, that can be used to organise the activities related to the selection-process of technology development projects. The framework is based upon recent literature and application at DAF Trucks Company. A technology development project has a long way to

  5. N-1: Safeguards Science and Technology Group, Tour Areas

    International Nuclear Information System (INIS)

    Geist, William H.

    2012-01-01

    Group N-1 develops and provides training on nondestructive assay (NDA) technologies intended for nuclear material accounting and control to fulfill both international and domestic obligations. The N-1 group is located at Technical Area (TA)-35 in Buildings 2 and 27. Visitors to the area can observe developed and fielded NDA technologies, as well as the latest research efforts to develop the next generation of NDA technologies. Several areas are used for NDA training. The N-1 School House area typically is used for basic training on neutron- and gamma-ray-based NDA techniques. This area contains an assortment of gamma-ray detector systems, including sodium iodide and high-purity germanium and the associated measurement components. Many types of neutron assay systems are located here, including both standard coincidence and multiplicity counters. The N-1 School House area is also used for holdup training; located here are the mock holdup assemblies and associated holdup measurement tools. Other laboratory areas in the N-1 space are used for specialized training, such as waste NDA, calorimetry, and advanced gamma-ray NDA. Also, many research laboratories in the N-1 space are used to develop new NDA technologies. The calorimetry laboratory is used to develop and evaluate new technologies and techniques that measure the heat signature from nuclear material to determine mass. The micro calorimetry laboratory is being used to develop advanced technologies that can measure gamma rays with extremely high resolution. This technique has been proven in the laboratory setting, and the team is now working to cultivate a field-capable system. The N-1 group also develops remote and unattended systems for the tracking and control of nuclear material. A demonstration of this technology is located within one of the laboratory spaces. The source tracker software was developed by N-1 to monitor the locations and quantities of nuclear materials. This software is currently used to track

  6. Merit exponents and control area diagrams in materials selection

    International Nuclear Information System (INIS)

    Zander, Johan; Sandstroem, Rolf

    2011-01-01

    Highlights: → Merit exponents are introduced to generalise the merit indices commonly used in materials selection. → The merit exponents can rank materials in general design situations. → To allow identification of the active merit exponent(s), control area diagrams are used. → Principles for generating the control area diagrams are presented. -- Abstract: Merit indices play a fundamental role in materials selection, since they enable ranking of materials. However, the conventional formulation of merit indices is associated with severe limitations. They are dependent on the explicit solution of the variables in the equations for the constraints from the design criteria. Furthermore, it is not always easy to determine which the controlling merit index is. To enable the ranking of materials in more general design cases, merit exponents are introduced as generalisations of the merit indices. Procedures are presented for how to compute the merit exponents numerically without having to solve equations algebraically. Merit exponents (and indices) are only valid in a certain range of property values. To simplify the identification of the controlling merit exponent, it is suggested that so called control area diagrams are used. These diagrams consist of a number of domains, each showing the active constraints and the controlling merit exponent. It is shown that the merit exponents play a crucial role when the control area diagram (CAD) is set up. The principles in the paper are developed for mechanically loaded components and are illustrated for engineering beams with two or three geometric variables.

  7. A Novel Hybrid Approach for Technology Selection in the Information Technology Industry

    Directory of Open Access Journals (Sweden)

    Nima Garoosi Mokhtarzadeh

    2018-03-01

    Full Text Available High-tech companies are rapidly growing in the world. Research and development (hereafter R&D department strength is the main asset that allows a firm to achieve a competitive advantage in high-tech businesses. The allocated budget to this sector is finite; thus, integration, human resource, risk and budget limitations should be considered to choose the most valuable project in the best portion of time. This paper investigates a case study from a high-tech company in Iran to prioritize the most attractive technologies for the R&D department. The case consists of twenty three technology options and the goal is to find the most attractive projects to sort them out for implementation in the R&D department. In this research, scholars proposed the best–worst method (henceforth BWM to find the weight of the criteria of the attractive technologies in first step and utilize the newly developed method total area based on orthogonal vectors (henceforward TAOV to sort the selected technologies based upon the identified criteria. Project integration is one of the least-noticed subjects in scientific papers; therefore, the researchers presented a zero or one linear programming (ZOLP model to optimize and schedule the implementation procedure on the project risk, budget and time limitation simultaneously. The results indicate that starting few but attractive projects in the first years and postponing the rest to the future, helps a firm to manage funds and gain profit with the least amount of risk.

  8. A Network Analysis Model for Selecting Sustainable Technology

    Directory of Open Access Journals (Sweden)

    Sangsung Park

    2015-09-01

    Full Text Available Most companies develop technologies to improve their competitiveness in the marketplace. Typically, they then patent these technologies around the world in order to protect their intellectual property. Other companies may use patented technologies to develop new products, but must pay royalties to the patent holders or owners. Should they fail to do so, this can result in legal disputes in the form of patent infringement actions between companies. To avoid such situations, companies attempt to research and develop necessary technologies before their competitors do so. An important part of this process is analyzing existing patent documents in order to identify emerging technologies. In such analyses, extracting sustainable technology from patent data is important, because sustainable technology drives technological competition among companies and, thus, the development of new technologies. In addition, selecting sustainable technologies makes it possible to plan their R&D (research and development efficiently. In this study, we propose a network model that can be used to select the sustainable technology from patent documents, based on the centrality and degree of a social network analysis. To verify the performance of the proposed model, we carry out a case study using actual patent data from patent databases.

  9. Wetland survey of selected areas in the K-24 Site Area of responsibility

    Energy Technology Data Exchange (ETDEWEB)

    Rosensteel, B.A.; Awl, D.J. [JAYCOR, Environmental Division, Oak Ridge, TN (United States)

    1995-07-01

    In accordance with DOE Regulations for Compliance with Floodplain/Wetlands Environmental Review Requirements, wetland surveys were conducted in selected areas within the K-25 Area of Responsibility during the summer of 1994. These areas are Mitchell Branch, Poplar Creek, the K-770 OU, Duct Island Peninsula, the Powerhouse area, and the K-25 South Corner. Previously surveyed areas included in this report are the main plant area of the K-25 Site, the K-901 OU, the AVLIS site, and the K-25 South Site. Wetland determinations were based on the USACE methodology. Forty-four separate wetland areas, ranging in size from 0.13 to 4.23 ha, were identified. Wetlands were identified in all of the areas surveyed with the exception of the interior of the Duct Island Peninsula and the main plant area of the K-25 Site. Wetlands perform functions such as floodflow alteration, sediment stabilization, sediment and toxicant retention, nutrient transformation, production export, and support of aquatic species and wildlife diversity and abundance. The forested, scrub-shrub, and emergent wetlands identified in the K-25 area perform some or all of these functions to varying degrees.

  10. Wetland survey of selected areas in the K-24 Site Area of responsibility

    International Nuclear Information System (INIS)

    Rosensteel, B.A.; Awl, D.J.

    1995-07-01

    In accordance with DOE Regulations for Compliance with Floodplain/Wetlands Environmental Review Requirements, wetland surveys were conducted in selected areas within the K-25 Area of Responsibility during the summer of 1994. These areas are Mitchell Branch, Poplar Creek, the K-770 OU, Duct Island Peninsula, the Powerhouse area, and the K-25 South Corner. Previously surveyed areas included in this report are the main plant area of the K-25 Site, the K-901 OU, the AVLIS site, and the K-25 South Site. Wetland determinations were based on the USACE methodology. Forty-four separate wetland areas, ranging in size from 0.13 to 4.23 ha, were identified. Wetlands were identified in all of the areas surveyed with the exception of the interior of the Duct Island Peninsula and the main plant area of the K-25 Site. Wetlands perform functions such as floodflow alteration, sediment stabilization, sediment and toxicant retention, nutrient transformation, production export, and support of aquatic species and wildlife diversity and abundance. The forested, scrub-shrub, and emergent wetlands identified in the K-25 area perform some or all of these functions to varying degrees

  11. Hydrogeochemical characteristics of groundwater in selected areas of NWFP

    International Nuclear Information System (INIS)

    Akram, W.; Sajjad, M.I.; Sheikh, M.R.; Iqbal, M.Z.

    1998-01-01

    Chemical composition of ground water in selected area of NWFP (Pakistan) was investigated. Water samples were collected from existing open well, tube wells, springs and the river Indus. Important physico-chemical parameter like temperature, pH and electrical conductivity were measured in situ. All the collected samples were analysed for their dissolved chemical constituents (Na, K, Ca, Mg, Cl, HCO/sub 3/, NO/sub 3, SO/sub 4///0 in the laboratory. Different standard technique likes atomic absorption spectrophotometry, UV-visible spectrophotometry, ion selective electrodes and titrimetry were used for sample analyses. Data was used to study the recent trends of ground water chemistry in these areas. Chemical quality of groundwater was evaluated to determine its suitability for drinking purposes by comparing with WHO standards. It was found that groundwater in these areas meets the norms of good quality drinking water except in very few locations. Different compositional types of water were also identified. It was observed that Ca is the dominant cation at most of the locations which is balanced by HCO/sub 3/ giving rise to calcium bicarbonate type groundwater. At few locations groundwater of sodium sodium bicarbonate or mixed type was also encountered. (author)

  12. Engineering research, development and technology. Thrust area report, FY93

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report.

  13. Decision Analysis System for Selection of Appropriate Decontamination Technologies

    International Nuclear Information System (INIS)

    Ebadian, M.A.; Boudreaux, J.F.; Chinta, S.; Zanakis, S.H.

    1998-01-01

    The principal objective for designing Decision Analysis System for Decontamination (DASD) is to support DOE-EM's endeavor to employ the most efficient and effective technologies for treating radiologically contaminated surfaces while minimizing personnel and environmental risks. DASD will provide a tool for environmental decision makers to improve the quality, consistency, and efficacy of their technology selection decisions. The system will facilitate methodical comparisons between innovative and baseline decontamination technologies and aid in identifying the most suitable technologies for performing surface decontamination at DOE environmental restoration sites

  14. Mixed waste characterization, treatment, and disposal focus area. Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    This paper presents details about the technology development programs of the Department of Energy. In this document, waste characterization, thermal treatment processes, non-thermal treatment processes, effluent monitors and controls, development of on-site innovative technologies, and DOE business opportunities are applied to environmental restoration. The focus areas for research are: contaminant plume containment and remediation; mixed waste characterization, treatment, and disposal; high-level waste tank remediation; landfill stabilization; and decontamination and decommissioning

  15. Mixed waste characterization, treatment, and disposal focus area. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This paper presents details about the technology development programs of the Department of Energy. In this document, waste characterization, thermal treatment processes, non-thermal treatment processes, effluent monitors and controls, development of on-site innovative technologies, and DOE business opportunities are applied to environmental restoration. The focus areas for research are: contaminant plume containment and remediation; mixed waste characterization, treatment, and disposal; high-level waste tank remediation; landfill stabilization; and decontamination and decommissioning.

  16. Technology demonstrations in the Decontamination and Decommissioning Focus Area

    International Nuclear Information System (INIS)

    Bossart, S.J.

    1996-01-01

    This paper describes three large-scale demonstration projects sponsored jointly by the Decontamination and Decommissioning Focus Area (DDFA), and the three US Department of Energy (DOE) Operations Offices that successfully offered to deactivate or decommission (D ampersand D) one of its facilities using a combination of innovative and commercial D ampersand D technologies. The paper also includes discussions on recent technology demonstrations for an Advanced Worker Protection System, an Electrohydraulic Scabbling System, and a Pipe Explorer trademark. The references at the conclusion of this paper should be consulted for more detailed information about the large-scale demonstration projects and recent technology demonstrations sponsored by the DDFA

  17. Contaminant plumes containment and remediation focus area. Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    EM has established a new approach to managing environmental technology research and development in critical areas of interest to DOE. The Contaminant Plumes Containment and Remediation (Plumes) Focus Area is one of five areas targeted to implement the new approach, actively involving representatives from basic research, technology implementation, and regulatory communities in setting objectives and evaluating results. This document presents an overview of current EM activities within the Plumes Focus Area to describe to the appropriate organizations the current thrust of the program and developing input for its future direction. The Plumes Focus Area is developing remediation technologies that address environmental problems associated with certain priority contaminants found at DOE sites, including radionuclides, heavy metals, and dense non-aqueous phase liquids (DNAPLs). Technologies for cleaning up contaminants of concern to both DOE and other federal agencies, such as volatile organic compounds (VOCs), polychlorinated biphenyls (PCBs), and other organics and inorganic compounds, will be developed by leveraging resources in cooperation with industry and interagency programs

  18. Contaminant plumes containment and remediation focus area. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    EM has established a new approach to managing environmental technology research and development in critical areas of interest to DOE. The Contaminant Plumes Containment and Remediation (Plumes) Focus Area is one of five areas targeted to implement the new approach, actively involving representatives from basic research, technology implementation, and regulatory communities in setting objectives and evaluating results. This document presents an overview of current EM activities within the Plumes Focus Area to describe to the appropriate organizations the current thrust of the program and developing input for its future direction. The Plumes Focus Area is developing remediation technologies that address environmental problems associated with certain priority contaminants found at DOE sites, including radionuclides, heavy metals, and dense non-aqueous phase liquids (DNAPLs). Technologies for cleaning up contaminants of concern to both DOE and other federal agencies, such as volatile organic compounds (VOCs), polychlorinated biphenyls (PCBs), and other organics and inorganic compounds, will be developed by leveraging resources in cooperation with industry and interagency programs.

  19. Developing a framework for energy technology portfolio selection

    Science.gov (United States)

    Davoudpour, Hamid; Ashrafi, Maryam

    2012-11-01

    Today, the increased consumption of energy in world, in addition to the risk of quick exhaustion of fossil resources, has forced industrial firms and organizations to utilize energy technology portfolio management tools viewed both as a process of diversification of energy sources and optimal use of available energy sources. Furthermore, the rapid development of technologies, their increasing complexity and variety, and market dynamics have made the task of technology portfolio selection difficult. Considering high level of competitiveness, organizations need to strategically allocate their limited resources to the best subset of possible candidates. This paper presents the results of developing a mathematical model for energy technology portfolio selection at a R&D center maximizing support of the organization's strategy and values. The model balances the cost and benefit of the entire portfolio.

  20. Coordinating technology introduction and entrepreneurial activities in rural areas

    NARCIS (Netherlands)

    Fokkema, J.E.; Pennink, B.J.W.; Simatupang, T.M.

    2017-01-01

    © Copyright 2017 Inderscience Enterprises Ltd. The main purpose of this research is to investigate how technology introduction projects in rural areas should be coordinated in order to achieve local economic development and the role of social capital and entrepreneurial activities. Characteristics

  1. Chongqing Economic and Technological Development Area:Community Overview

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Chongqing Economic and Technological Development Area, for 13 years of development, has made detailed work in building the investment environment, bold job in the management system innovation, full strengths in business recruitment and investment attacting,hard job in cultivating new point of economic growth.

  2. Wireless local area network. A new technology of network

    International Nuclear Information System (INIS)

    Wu Yunjun; Zhao Zongtao

    2003-01-01

    This paper introduces Wireless Local Area Network (WLAN), including the concept, history, characters and the foreground of its development, it also narrates in detail the several key techniques used to implement IEEE802.11 WLAN, and ideas on key technology of future progress in wireless LAN field have also been presented. (authors)

  3. GREY STATISTICS METHOD OF TECHNOLOGY SELECTION FOR ADVANCED PUBLIC TRANSPORTATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Chien Hung WEI

    2003-01-01

    Full Text Available Taiwan is involved in intelligent transportation systems planning, and is now selecting its prior focus areas for investment and development. The high social and economic impact associated with which intelligent transportation systems technology are chosen explains the efforts of various electronics and transportation corporations for developing intelligent transportation systems technology to expand their business opportunities. However, there has been no detailed research conducted with regard to selecting technology for advanced public transportation systems in Taiwan. Thus, the present paper demonstrates a grey statistics method integrated with a scenario method for solving the problem of selecting advanced public transportation systems technology for Taiwan. A comprehensive questionnaire survey was conducted to demonstrate the effectiveness of the grey statistics method. The proposed approach indicated that contactless smart card technology is the appropriate technology for Taiwan to develop in the near future. The significance of our research results implies that the grey statistics method is an effective method for selecting advanced public transportation systems technologies. We feel our information will be beneficial to the private sector for developing an appropriate intelligent transportation systems technology strategy.

  4. Annotated bibliography on selected areas of coal mining research and development. Report prepared for the Committee on Science and Technology, US House of Representatives, Ninety-Sixth Congress, First Session by the Congressional Research Service, Library of Congress

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    The Congressional Research Service has completed an annotated bibliography on coal mining research and development. Although the completion of the study was delayed in order to permit CRS analysts to search the libraries of Bituminous Coal, Research Inc., and the Bureau of Mines in the Pittsburgh area, current re-emphasis on the use of coal as an energy source indicates a sustained relevance. The bibliography presents key references to coal-mining R and D under six subject headings keyed to issues of central concern in coal production: (1) mine health and safety, (2) methane recovery, (3) 1-hour rescuer, (4) use of diesels underground, (5) coal preparation, and (6) manpower development in coal mining.

  5. Radon gas exposure levels in some selected areas in Egypt

    International Nuclear Information System (INIS)

    Ali, E.M.; Taha, T.M.; Gomaa, M.A.; El-Hussein, A.M.; Ahmed, A.A.

    2005-01-01

    During a summer season of 2003, the atmospheric concentrations of radon gas were measured indoor every one-hour for twenty-four hour measurements in some selected areas, using Pylon-AB4. Two hundreds and forty samples were monitored to determine the concentration of radon gas at each location using high-efficiency Lucas type continuous passive cell. The average values of radon gas concentration were taken in three time intervals 6.00:18.00, 18.00:6.00 and whole day. The average values of indoor radon gas of two locations using three time intervals were 4.82±0.63, 9±0.71 and 6.9±0.33 and 9.6±0.23, 11.82±0.42 and 9.37±0.7 Bq/m /h. respectively. The exposure levels were within the ICRP and EPA recommendations

  6. Sustainable school infrastructure through effective innovative building technology selection

    CSIR Research Space (South Africa)

    Mphahlele, C

    2014-10-01

    Full Text Available The aim of the paper is to provide an overview of a model proposed for the selection Innovative Building Technologies (IBTs) and procurement of services supporting the erection of the IBTs that will ensure the construction of a sustainable school...

  7. Mapping of health technology assessment in selected countries

    NARCIS (Netherlands)

    Oortwijn, W.; Broos, P.; Vondeling, Hindrik; Banta, D.; Todorova, L.

    2013-01-01

    Objectives: The aim of this study was to develop and apply an instrument to map the level of health technology assessment (HTA) development at country level in selected countries. We examined middle-income countries (Argentina, Brazil, India, Indonesia, Malaysia, Mexico, and Russia) and countries

  8. Economics of selected water control technologies and their ...

    African Journals Online (AJOL)

    Using a production function, marginal productivity of farm inputs and benefit-cost analysis, we explore the economics of selected water control technologies. From the production function, all farm inputs, including irrigation water is found to have a significant and positive effect on yield. Marginal value products of farm inputs ...

  9. Biogas technology research in selected sub-Saharan African countries

    African Journals Online (AJOL)

    This reviews aims to provide an insight and update of the state of biogas technology research in some selected sub-Saharan African countries in peer reviewed literature. This paper also aims to highlight the sub-Saharan countries' strengths and weaknesses in biogas research and development capacity. An attempt is ...

  10. A software tool for soil clean-up technology selection

    International Nuclear Information System (INIS)

    Vranes, S.; Gonzalez-Valencia, E.; Lodolo, A.; Miertus, S.

    2002-01-01

    Soil remediation is a difficult, time-consuming and expensive operation. A variety of mature and emerging soil remediation technologies is available and future trends in remediation will include continued competition among environmental service companies and technology developers, which will definitely result in further increase in the clean-up options. Consequently, the demand has enhanced developing decision support tools that could help the decision makers to select the most appropriate technology for the specific contaminated site, before the costly remedial actions are taken. Therefore, a software tool for soil clean-up technology selection is currently being developed with the aim of closely working with human decision makers (site owners, local community representatives, environmentalists, regulators, etc.) to assess the available technologies and preliminarily select the preferred remedial options. The analysis for the identification of the best remedial options is based on technical, financial, environmental, and social criteria. These criteria are ranked by all involved parties to determine their relative importance for a particular project. (author)

  11. Application of local area network technology in an engineering environment

    International Nuclear Information System (INIS)

    Powell, A.D.; Sokolowski, M.A.

    1990-01-01

    This paper reports on the application of local area network technology in an engineering environment. Mobil Research and Development Corporation Engineering, Dallas, texas has installed a local area network (LAN) linking over 85 microcomputers. This network, which has been in existence for more than three years, provides common access by all engineers to quality output devices such as laser printers and multi-color pen plotters; IBM mainframe connections; electronic mail and file transfer; and common engineering program. The network has been expanded via a wide area ethernet network to link the Dallas location with a functionally equivalent LAN of over 400 microcomputers in Princeton, N.J. Additionally, engineers on assignment at remote areas in Europe, U.S., Africa and project task forces have dial-in access to the network via telephone lines

  12. Awareness and using of medical students about mobile health technology in clinical areas.

    Science.gov (United States)

    Ehteshami, Asghar; Hachesu, Peyman Rezaei; Esfahani, Mahtab Kasayi; Rezazadeh, Esmaeil

    2013-01-01

    NONE DECLARED. Necessity of data transmission and getting contact with specialists is so evident in impassable regions. In order to solve such problems, there are different solutions one of which is mobile health technology. Being small and user-friendly, easy to enter data and having low expense are some of its advantages. This study aims to define the association between awareness of medical students in clinical stage about mobile health technology application and the rate of their using this technology in educational hospital of Isfahan in 2011. The study is a cross-sectional analytical application research. Sixty medical students were selected as samples from a society of 240 medical students. A researcher-made questionnaire was used. The questionnaire included 21 multiple choice and 15 yes no questions, which were corrected to reach a score. A researcher-made checklist with 5-fold Likert scale was used to define the rate of applying such technology. The reliability of questionnaire was confirmed through a test-retest. The collected data were analyzed with the help of SPSS software in descriptive and deductive statistics level. The highest percentage of awareness about mobile health technology among medical students in the clinical stage of Azzahra educational hospital is 45.6 in nature areas, and their lowest percentage of awareness is 17.8 in the infrastructure area. In addition, their mean awareness of all areas is 54.4. The highest percentage of using mobile health technology by medical students is 14.6 in the education area, and their lowest percentage of usage is 6.8 in the treatment area. Their mean usage of all areas is 9.4 as well. The rate of awareness and application of mobile health technology is not favorable. Except for treatment, there is no significant association between the rate of awareness and application of mobile health technology.

  13. Awareness and Using of Medical Students About Mobile Health Technology in Clinical Areas

    Science.gov (United States)

    Ehteshami, Asghar; Hachesu, Peyman Rezaei; Esfahani, Mahtab Kasayi

    2013-01-01

    CONFLICT OF INTEREST: NONE DECLARED Introduction Necessity of data transmission and getting contact with specialists is so evident in impassable regions. In order to solve such problems, there are different solutions one of which is mobile health technology. Being small and user-friendly, easy to enter data and having low expense are some of its advantages. This study aims to define the association between awareness of medical students in clinical stage about mobile health technology application and the rate of their using this technology in educational hospital of Isfahan in 2011. Method The study is a cross-sectional analytical application research. Sixty medical students were selected as samples from a society of 240 medical students. A researcher-made questionnaire was used. The questionnaire included 21 multiple choice and 15 yes no questions, which were corrected to reach a score. A researcher-made checklist with 5-fold Likert scale was used to define the rate of applying such technology. The reliability of questionnaire was confirmed through a test–retest. The collected data were analyzed with the help of SPSS software in descriptive and deductive statistics level. Findings The highest percentage of awareness about mobile health technology among medical students in the clinical stage of Azzahra educational hospital is 45.6 in nature areas, and their lowest percentage of awareness is 17.8 in the infrastructure area. In addition, their mean awareness of all areas is 54.4. The highest percentage of using mobile health technology by medical students is 14.6 in the education area, and their lowest percentage of usage is 6.8 in the treatment area. Their mean usage of all areas is 9.4 as well. Conclusion The rate of awareness and application of mobile health technology is not favorable. Except for treatment, there is no significant association between the rate of awareness and application of mobile health technology. PMID:24058250

  14. Wireless body area networks technology, implementation, and applications

    CERN Document Server

    Yuce, Mehmet R

    2011-01-01

    The book provides a comprehensive overview for the latest WBAN systems, technologies, and applications. The chapters of the book have been written by various specialists who are experts in their areas of research and practice. The book starts with the basic techniques involved in designing and building WBAN systems. It explains the deployment issues and then moves into the application areas of WBAN. The remaining chapters focus on the development of hardware, signal processing algorithms, and wireless communication and network design for wearable and implantable body sensors used in WBAN appli

  15. Decision support for selecting exportable nuclear technology using the analytic hierarchy process: A Korean case

    International Nuclear Information System (INIS)

    Lee, Deok Joo; Hwang, Jooho

    2010-01-01

    The Korean government plans to increase strategically focused R and D investment in some promising nuclear technology areas to create export opportunities of technology in a global nuclear market. The purpose of this paper is to present a decision support process for selecting promising nuclear technology with the perspective of exportability by using the AHP based on extensive data gathered from nuclear experts in Korea. In this study, the decision criteria for evaluating the export competitiveness of nuclear technologies were determined, and a hierarchical structure for the decision-making process was systematically developed. Subsequently relative weights of decision criteria were derived using AHP methodology and the export competitiveness of nuclear technology alternatives was quantified to prioritize them. We discuss the implications of our results with a viewpoint toward national nuclear technology policy.

  16. System driven technology selection for future European launch systems

    Science.gov (United States)

    Baiocco, P.; Ramusat, G.; Sirbi, A.; Bouilly, Th.; Lavelle, F.; Cardone, T.; Fischer, H.; Appel, S.

    2015-02-01

    In the framework of the next generation launcher activity at ESA, a top-down approach and a bottom-up approach have been performed for the identification of promising technologies and alternative conception of future European launch vehicles. The top-down approach consists in looking for system-driven design solutions and the bottom-up approach features design solutions leading to substantial advantages for the system. The main investigations have been focused on the future launch vehicle technologies. Preliminary specifications have been used in order to permit sub-system design to find the major benefit for the overall launch system. The development cost, non-recurring and recurring cost, industrialization and operational aspects have been considered as competitiveness factors for the identification and down-selection of the most interesting technologies. The recurring cost per unit payload mass has been evaluated. The TRL/IRL has been assessed and a preliminary development plan has been traced for the most promising technologies. The potentially applicable launch systems are Ariane and VEGA evolution. The main FLPP technologies aim at reducing overall structural mass, increasing structural margins for robustness, metallic and composite containment of cryogenic hydrogen and oxygen propellants, propellant management subsystems, elements significantly reducing fabrication and operational costs, avionics, pyrotechnics, etc. to derive performing upper and booster stages. Application of the system driven approach allows creating performing technology demonstrators in terms of need, demonstration objective, size and cost. This paper outlines the process of technology down selection using a system driven approach, the accomplishments already achieved in the various technology fields up to now, as well as the potential associated benefit in terms of competitiveness factors.

  17. NASA Technology Area 07: Human Exploration Destination Systems Roadmap

    Science.gov (United States)

    Kennedy, Kriss J.; Alexander, Leslie; Landis, Rob; Linne, Diane; Mclemore, Carole; Santiago-Maldonado, Edgardo; Brown, David L.

    2011-01-01

    This paper gives an overview of the National Aeronautics and Space Administration (NASA) Office of Chief Technologist (OCT) led Space Technology Roadmap definition efforts. This paper will given an executive summary of the technology area 07 (TA07) Human Exploration Destination Systems (HEDS). These are draft roadmaps being reviewed and updated by the National Research Council. Deep-space human exploration missions will require many game changing technologies to enable safe missions, become more independent, and enable intelligent autonomous operations and take advantage of the local resources to become self-sufficient thereby meeting the goal of sustained human presence in space. Taking advantage of in-situ resources enhances and enables revolutionary robotic and human missions beyond the traditional mission architectures and launch vehicle capabilities. Mobility systems will include in-space flying, surface roving, and Extra-vehicular Activity/Extravehicular Robotics (EVA/EVR) mobility. These push missions will take advantage of sustainability and supportability technologies that will allow mission independence to conduct human mission operations either on or near the Earth, in deep space, in the vicinity of Mars, or on the Martian surface while opening up commercialization opportunities in low Earth orbit (LEO) for research, industrial development, academia, and entertainment space industries. The Human Exploration Destination Systems (HEDS) Technology Area (TA) 7 Team has been chartered by the Office of the Chief Technologist (OCT) to strategically roadmap technology investments that will enable sustained human exploration and support NASA s missions and goals for at least the next 25 years. HEDS technologies will enable a sustained human presence for exploring destinations such as remote sites on Earth and beyond including, but not limited to, LaGrange points, low Earth orbit (LEO), high Earth orbit (HEO), geosynchronous orbit (GEO), the Moon, near

  18. Technology needs for selecting and evaluating high-level waste repository sites in crystalline rock

    International Nuclear Information System (INIS)

    1988-12-01

    This report describes properties and processes that govern the performance of the geological barrier in a nuclear waste isolation system in crystalline rock and the state-of-the-art in the understanding of these properties and processes. Areas and topics that require further research and development as well as technology needs for investigating and selecting repository sites are presented. Experiences from the Swedish site selection program are discussed, and a general investigation strategy is presented for an area characterization phase of an exploratory program in crystalline rocks. 255 refs., 65 figs., 10 tabs

  19. Sources of transportation expertise by selected technical areas

    International Nuclear Information System (INIS)

    1987-01-01

    The US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) has assigned components of its Waste Transportation Program to three of the DOE Operations offices. The DOE Oak Ridge Operations Office (ORO) is responsible for the transportation operations design, development, acquisition, testing, implementation, and program management, including the equipment, facilities, and services of the transportation system. Within ORO, the OCRWM transportation component is assigned to the Transportation Operations Project Office (TOPO). The specific activities involved in the ORO/TOPO include procurement, operational testing, inspection, logistics, interfaces, maintenance, management and improvements, and system operation. Oak Ridge Associated Universities (ORAU) has developed (and will maintain and enhance) a data base of sources of transportation expertise in selected technical areas for ORO. The data base includes individuals and organizations who have indicated that they have capabilities and interest in assisting ORO in the design, development, implementation, and management of the OCRWM transportation system. This assistance might be in the form of consulting or subcontract work and/or participation in peer review panels, technical evaluation committees, workshops, advisory groups, etc. This initial project was completed in the four month period of January 30, 1987 through May 31, 1987

  20. Sub-micron resolution selected area electron channeling patterns.

    Science.gov (United States)

    Guyon, J; Mansour, H; Gey, N; Crimp, M A; Chalal, S; Maloufi, N

    2015-02-01

    Collection of selected area channeling patterns (SACPs) on a high resolution FEG-SEM is essential to carry out quantitative electron channeling contrast imaging (ECCI) studies, as it facilitates accurate determination of the crystal plane normal with respect to the incident beam direction and thus allows control the electron channeling conditions. Unfortunately commercial SACP modes developed in the past were limited in spatial resolution and are often no longer offered. In this contribution we present a novel approach for collecting high resolution SACPs (HR-SACPs) developed on a Gemini column. This HR-SACP technique combines the first demonstrated sub-micron spatial resolution with high angular accuracy of about 0.1°, at a convenient working distance of 10mm. This innovative approach integrates the use of aperture alignment coils to rock the beam with a digitally calibrated beam shift procedure to ensure the rocking beam is maintained on a point of interest. Moreover a new methodology to accurately measure SACP spatial resolution is proposed. While column considerations limit the rocking angle to 4°, this range is adequate to index the HR-SACP in conjunction with the pattern simulated from the approximate orientation deduced by EBSD. This new technique facilitates Accurate ECCI (A-ECCI) studies from very fine grained and/or highly strained materials. It offers also new insights for developing HR-SACP modes on new generation high-resolution electron columns. Copyright © 2014 Elsevier B.V. All rights reserved.

  1. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram

    International Nuclear Information System (INIS)

    O'Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II (this volume) describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Specific INEL problem areas/contaminants are identified along with technology solutions, the status of the technologies, precise science and technology needs, and implementation requirements. Volume III provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are referenced by a TEDS codenumber in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II

  2. Process for Selecting System Level Assessments for Human System Technologies

    Science.gov (United States)

    Watts, James; Park, John

    2006-01-01

    The integration of many life support systems necessary to construct a stable habitat is difficult. The correct identification of the appropriate technologies and corresponding interfaces is an exhaustive process. Once technologies are selected secondary issues such as mechanical and electrical interfaces must be addressed. The required analytical and testing work must be approached in a piecewise fashion to achieve timely results. A repeatable process has been developed to identify and prioritize system level assessments and testing needs. This Assessment Selection Process has been defined to assess cross cutting integration issues on topics at the system or component levels. Assessments are used to identify risks, encourage future actions to mitigate risks, or spur further studies.

  3. Area selection for a geological repository of high level radioactive waste in China

    International Nuclear Information System (INIS)

    Jin Yuanxin; Wang Ju; Chen Weiming; Guo Yonghai; Su Rui; Zhao Honggang; Xu Guoqing

    2012-01-01

    China started research on HLW disposal in 1985 and 6 areas, including Northwest, Southwest, East China, South China, Inner Mongolia and Xinjiang area, are selected. The results show that the Northwest area has obvious comprehensive advantages, which can be considered as the first area for site selection, while site characterization and comparison research in the area should be continued. (authors)

  4. Technology selection for remediation of lead and hydrocarbon contaminated soil

    International Nuclear Information System (INIS)

    Richardson, K.E.; Sparks, G.M.

    1993-01-01

    This paper presents a methodology for selection of a technology for remediation of 70,000 tons of lead and hydrocarbon impacted soil resulting from an excavation at the Mobil Torrance Refinery. This methodology resulted from over two years of extensive research and technology evaluation. Twelve technologies and combination of technologies were evaluated, which often included bench scale testing, to determine the most cost effective and technically feasible remediation option. The results of the studies for each technology are discussed and presented in tabular form. The technologies investigated include: fixation/stabilization, soil washing, solvent washing, heap leach extraction, froth flotation, bioremediation, thermal desorption, electrokinetic extraction, asphalt incorporation, vitrification, off-site treatment, and off-site disposal. The associated costs and technical feasibility of each of the remediation options evaluated are presented. Laboratory analyses of the excavated soil indicate hydrocarbons range from non-detect to 11,000 ppm with an average of 2,600 ppm, soluble lead (CA test-not TCLP) range from 1.4 ppm to 100 ppm with an average of 29 ppm, and low levels of organic lead are present. Average grain size of the soil ranges from number-sign 200 to number-sign 120 mesh, and permeability averages 10--4 cm/sec. Significant odors, likely caused by hydrogen sulfide and thiophenes, were detected when the soil was excavated and control of odors during the remediation phase is a critical concern

  5. Selection and Interview Forms for Nomination Area Committees. Appendix A.

    Science.gov (United States)

    Georgia State Dept. of Education, Atlanta. Office of Instructional Services.

    The selection and interview forms for use in selecting students for the Georgia Governor's Honors Program are provided. These forms are: Science Interview Summary Sheet; Interview Form for Candidates in Music; State College Musicality Test; Mathematics Interview Sheet; Criteria for Selection of Students for Mathematics, 1972; Visual Arts…

  6. An Aerial Radiological Survey of Selected Areas of Area 18 - Nevada Test Site

    International Nuclear Information System (INIS)

    Lyons, Craig

    2009-01-01

    As part of the proficiency training for the Radiological Mapping mission of the Aerial Measuring System (AMS), a survey team from the Remote Sensing Laboratory-Nellis (RSL-Nellis) conducted an aerial radiological survey of selected areas of Area 18 of the Nevada Test Site (NTS) for the purpose of mapping man-made radiation deposited as a result of the Johnnie Boy and Little Feller I tests. The survey area centered over the Johnnie Boy ground zero but also included the ground zero and deposition area of the Little Feller I test, approximately 7,000 feet (2133 meters) southeast of the Johnnie Boy site. The survey was conducted in one flight. The completed survey covered a total of 4.0 square miles. The flight lines (with the turns) over the surveyed areas are presented in Figure 1. One 2.5-hour-long flight was performed at an altitude of 100 ft above ground level (AGL) with 200 foot flight-line spacing. A test-line flight was conducted near the Desert Rock Airstrip to ensure quality control of the data. The test line is not shown in Figure 1. However, Figure 1 does include the flight lines for a ''perimeter'' flight. The path traced by the helicopter flying over distinct roads within the survey area can be used to overlay the survey data on a base map or image. The flight survey lines were flown in an east-west orientation perpendicular to the deposition patterns for both sites. This technique provides better spatial resolution when contouring the data. The data were collected by the AMS data acquisition system (REDAR V) using an array of twelve 2-inch x 4-inch x 16-inch sodium iodide (NaI) detectors flown on-board a twin-engine Bell 412 helicopter. Data, in the form of gamma energy spectra, were collected every second over the course of the survey and were geo-referenced using a differential Global Positioning System. Spectral data allows the system to distinguish between ordinary fluctuations in natural background radiation levels and the signature produced by man

  7. Health information technology vendor selection strategies and total factor productivity.

    Science.gov (United States)

    Ford, Eric W; Huerta, Timothy R; Menachemi, Nir; Thompson, Mark A; Yu, Feliciano

    2013-01-01

    The aim of this study was to compare health information technology (HIT) adoption strategies' relative performance on hospital-level productivity measures. The American Hospital Association's Annual Survey and Healthcare Information and Management Systems Society Analytics for fiscal years 2002 through 2007 were used for this study. A two-stage approach is employed. First, a Malmquist model is specified to calculate hospital-level productivity measures. A logistic regression model is then estimated to compare the three HIT adoption strategies' relative performance on the newly constructed productivity measures. The HIT vendor selection strategy impacts the amount of technological change required of an organization but does not appear to have either a positive or adverse impact on technical efficiency or total factor productivity. The higher levels in technological change experienced by hospitals using the best of breed and best of suite HIT vendor selection strategies may have a more direct impact on the organization early on in the process. However, these gains did not appear to translate into either increased technical efficiency or total factor productivity during the period studied. Over a longer period, one HIT vendor selection strategy may yet prove to be more effective at improving efficiency and productivity.

  8. Radioactive Tank Waste Remediation Focus Area. Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    In February 1991, DOE's Office of Technology Development created the Underground Storage Tank Integrated Demonstration (UST-ID), to develop technologies for tank remediation. Tank remediation across the DOE Complex has been driven by Federal Facility Compliance Agreements with individual sites. In 1994, the DOE Office of Environmental Management created the High Level Waste Tank Remediation Focus Area (TFA; of which UST-ID is now a part) to better integrate and coordinate tank waste remediation technology development efforts. The mission of both organizations is the same: to focus the development, testing, and evaluation of remediation technologies within a system architecture to characterize, retrieve, treat, concentrate, and dispose of radioactive waste stored in USTs at DOE facilities. The ultimate goal is to provide safe and cost-effective solutions that are acceptable to both the public and regulators. The TFA has focused on four DOE locations: the Hanford Site in Richland, Washington, the Idaho National Engineering Laboratory (INEL) near Idaho Falls, Idaho, the Oak Ridge Reservation in Oak Ridge, Tennessee, and the Savannah River Site (SRS) in Aiken, South Carolina

  9. Selection of Nuclear Desalination Technology in East Kalimantan Province

    International Nuclear Information System (INIS)

    Siti Alimah; Sudi Ariyanto; Erlan Dewita; Budiarto; Geni R Sunaryo

    2009-01-01

    Nowadays, electricity demand in East Kalimantan increases with a rate of 12% per annum. Since the electricity supply produced by PT PLN increases 8,5% per annum, then it can consequently an occurrence of electricity shortage in the region. NPP may be regarded as one viable option to overcome the problem. In case of fresh water availability, the supply is also less than the demand. Therefore, a serious effort is necessary. Nuclear desalination, which is a process of separating dissolved salts of seawater or brackish water, can be coupled to the NPP to produce fresh water. There are some desalination technology commonly used in the world i.e. MSF (Multi-Stage Flash Distillation), MED (Multi-Effect Distillation) and RO (Reverse Osmosis). This paper shows the study result of selection for desalination technology to obtain the optimum solution. The selection is done based on the thirteen important parameters, which are estimated to affect on determine technology option on the nuclear desalination with a weighing factor with ranges from 1 to 4. The most favourable technology is that with the highest point. The result show that MED has highest weighing factor that is 39, followed 36 for RO and 33 for MSF. Since the water quality requirement to supply NPP is about 1 ppm and to supply public demand is below 1000 ppm, so a hybrid system of MED-RO is optimum option to produce fresh water. (author)

  10. New Products and Technologies, Based on Calculations Developed Areas

    Directory of Open Access Journals (Sweden)

    Gheorghe Vertan

    2013-09-01

    Full Text Available Following statistics, currently prosperous and have high GDP / capita, only countries that have and fructify intensively large natural resources and/or produce and export products massive based on patented inventions accordingly. Without great natural wealth and the lowest GDP / capita in the EU, Romania will prosper only with such products. Starting from the top experience in the country, some patented, can develop new and competitive technologies and patentable and exportable products, based on exact calculations of developed areas, such as that double shells welded assemblies and plating of ships' propellers and blade pump and hydraulic turbines.

  11. Technology Strategy for 'Environmental Technology for the Future'; Technology Target Areas; TTA1 - environmental technology for the future

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    } emissions from offshore facilities. Develop knowledge and new concepts for carbon capture and storage solutions that are energy efficient, with low cost and low impact.; Produced water management: Develop and qualify technologies to minimise water production as fields mature and technologies to remove identified harmful components, including compact, effective retrofit solutions. Develop and qualify high reliability 'zero discharge' solutions, taking into account a life cycle perspective and including reliable on-line monitors. Develop and qualify efficient water management systems that require less/greener chemicals, are energy efficient and produce a minimum of waste products; Acute discharges, leaks and spills: Develop and qualify spill and leak detection and monitoring technologies for subsea flowlines. Develop and demonstrate robust oil spill monitoring and response technologies and methods, with focus on near shore and Arctic areas. Develop next generation tools for predicting drift, fate and effect of oil spread in selected coastal, deepwater and Arctic areas; Chemicals management: Develop and qualify decision support tools for optimum selection and application of chemicals to minimize unwanted interactions in processing systems, incorporating evaluation of alternatives to chemical usage; Balance emissions and discharges: Develop methods and criteria for balancing and assessing impacts from discharges to sea and emissions to air (holistic approach) as well as minimising the total footprint. Develop assessment methods and criteria to evaluate impacts of discharges offshore vs in the coastal zone. Quantify the effects of compliance to a zero discharge versus a zero harmful discharge framework. Communicating the industry's high standards and track record, and the exciting future sustainable development opportunities, are key to improve public perception as well as recruitment to the oil and gas industry. Continuous improvement of environmental legislation

  12. Factors affecting the selection of a soil water sensing technology

    International Nuclear Information System (INIS)

    Hignett, C.T.

    2000-01-01

    Reviews of soil moisture measurement technologies are counterproductive in attempting to identify the single approach that has the best overall performance for a range of soil, crop and landscape conditions. Not only does such an approach preclude the addition of new technologies, but it also obscures the fact that we have available today sensors and technologies that cover most field conditions, are well understood in terms of technical capability and are mechanically and electronically reliable. This review defines decision-making processes for assessing the characteristics, good and bad, of technology in relation to project objectives. Two processes are needed. The first links soil texture and scale of variability with the nature of the project, single-plant to catchment scale, to the needs for soil water measurement. The second lists the capabilities of some devices and shows how they can be selected to accommodate necessary criteria. It is concluded that the 'best technology' is a function of the project and soil conditions. (author)

  13. Volvo and Infiniti drivers' experiences with select crash avoidance technologies.

    Science.gov (United States)

    Braitman, Keli A; McCartt, Anne T; Zuby, David S; Singer, Jeremiah

    2010-06-01

    Vehicle-based crash avoidance systems can potentially reduce crashes, but success depends on driver acceptance and understanding. This study gauged driver use, experience, and acceptance among early adopters of select technologies. Telephone interviews were conducted in early 2009 with 380 owners of Volvo vehicles equipped with forward collision warning with autobrake, lane departure warning, side-view assist, and/or active bi-xenon headlights and 485 owners of Infiniti vehicles with lane departure warning/prevention. Most owners kept systems turned on most of the time, especially forward collision warning with autobrake and side-view assist. The exception was lane departure prevention; many owners were unaware they had it, and the system must be activated each time the vehicle is started. Most owners reported being safer with the technologies and would want them again on their next vehicles. Perceived false or unnecessary warnings were fairly common, particularly with side-view assist. Some systems were annoying, especially lane departure warning. Many owners reported safer driving behaviors such as greater use of turn signals (lane departure warning), increased following distance (forward collision warning), and checking side mirrors more frequently (side-view assist), but some reported driving faster at night (active headlights). Despite some unnecessary or annoying warnings, most Volvo and Infiniti owners use crash avoidance systems most of the time. Among early adopters, the first requirement of effective warning systems (that owners use the technology) seems largely met. Systems requiring activation by drivers for each trip are used less often. Owner experience with the latest technologies from other automobile manufacturers should be studied, as well as for vehicles on which technologies are standard (versus optional) equipment. The effectiveness of technologies in preventing and mitigating crashes and injuries, and user acceptance of interfaces, should be

  14. Selecting Map Projections in Minimizing Area Distortions in GIS Applications

    Directory of Open Access Journals (Sweden)

    Ahmet Kaya

    2008-12-01

    Full Text Available Varioussoftware for Geographical Information Systems (GISs have been developed and used in many different engineering projects. In GIS applications, map coverage is important in terms of performing reliable and meaningful queries. Map projections can be conformal, equal-area and equidistant. The goal of an application plays an important role in choosing one of those projections. Choosing the equal-area projection for an application in which area information is used (forestry, agriculture, ecosystem etc reduces the amount of distortion on the area, but many users using GIS ignore this fact and continue to use applications with present map sheets no matter in what map projection it is. For example, extracting area information from data whose country system’s map sheet is in conformal projection is relatively more distorted, compared to an equal-area projection one. The goal of this study is to make the best decision in choosing the most proper equal-area projection among the choices provided by ArcGIS 9.0, which is a popular GIS software package, and making a comparison on area errors when conformal projection is used. In this study, the area of parcels chosen in three different regions and geographic coordinates and whose sizes vary between 0.01 to 1,000,000 ha are calculated according to Transversal Mercator (TM, 3°, Universal Transversal Mercator (UTM, 6° and 14 different equal-area projections existing in the ArcGIS 9.0 GIS software package. The parcel areas calculated with geographical coordinates are accepted as definite. The difference between the sizes calculated according to projection coordinates and real sizes of the parcels are determined. Consequently, the appropriate projections are decided for the areas smaller and equal than 1,000 ha and greater than 1,000 ha in the GIS software package.

  15. Low-level radioactive waste technology: a selected, annotated bibliography

    International Nuclear Information System (INIS)

    Fore, C.S.; Vaughan, N.D.; Hyder, L.K.

    1980-10-01

    This annotated bibliography of 447 references contains scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on environmental transport, disposal site, and waste treatment studies. The publication covers both domestic and foreign literature for the period 1952 to 1979. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology and Site Resources; Regulatory and Economic Aspects; Transportation Technology; Waste Production; and Waste Treatment. Specialized data fields have been incorporated into the data file to improve the ease and accuracy of locating pertinent references. Specific radionuclides for which data are presented are listed in the Measured Radionuclides field, and specific parameters which affect the migration of these radionuclides are presented in the Measured Parameters field. In addition, each document referenced in this bibliography has been assigned a relevance number to facilitate sorting the documents according to their pertinence to low-level radioactive waste technology. The documents are rated 1, 2, 3, or 4, with 1 indicating direct applicability to low-level radioactive waste technology and 4 indicating that a considerable amount of interpretation is required for the information presented to be applied. The references within each chapter are arranged alphabetically by leading author, corporate affiliation, or title of the document. Indexes are provide for (1) author(s), (2) keywords, (3) subject category, (4) title, (5) geographic location, (6) measured parameters, (7) measured radionuclides, and (8) publication description

  16. Low-level radioactive waste technology: a selected, annotated bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Fore, C.S.; Vaughan, N.D.; Hyder, L.K.

    1980-10-01

    This annotated bibliography of 447 references contains scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on environmental transport, disposal site, and waste treatment studies. The publication covers both domestic and foreign literature for the period 1952 to 1979. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology and Site Resources; Regulatory and Economic Aspects; Transportation Technology; Waste Production; and Waste Treatment. Specialized data fields have been incorporated into the data file to improve the ease and accuracy of locating pertinent references. Specific radionuclides for which data are presented are listed in the Measured Radionuclides field, and specific parameters which affect the migration of these radionuclides are presented in the Measured Parameters field. In addition, each document referenced in this bibliography has been assigned a relevance number to facilitate sorting the documents according to their pertinence to low-level radioactive waste technology. The documents are rated 1, 2, 3, or 4, with 1 indicating direct applicability to low-level radioactive waste technology and 4 indicating that a considerable amount of interpretation is required for the information presented to be applied. The references within each chapter are arranged alphabetically by leading author, corporate affiliation, or title of the document. Indexes are provide for (1) author(s), (2) keywords, (3) subject category, (4) title, (5) geographic location, (6) measured parameters, (7) measured radionuclides, and (8) publication description.

  17. Ground water in selected areas in the Klamath Basin, Oregon

    Science.gov (United States)

    Leonard, A.R.; Harris, A.B.

    1973-01-01

    GROUNDWATER FEATURES OF SIX LOWLAND AREAS IN THE KLAMATH BASIN OF OREGON--KLAMATH MARSH AREA, AND SPRAGUE RIVER, SWAN LAKE, YONNA, POE, AND LANGELL VALLEYS--ARE DESCRIBED. RUGGED MOUNTAINS AND RIDGES SURROUND AND SEPARATE THESE LOWLANDS WHERE FLOORS RANGE IN ALTITUDE FROM 4,100 FEET IN POE VALLEY TO 4,600 FEET NORTH OF KLAMATH MARSH. THE SIX AREAS EXTEND OVER A NORTH-SOUTH DISTANCE OF 70 MILES, AN EAST-WEST DISTANCE OF 40 MILES, AND INCLUDE AN AREA OF APPROXIMATELY 600 SQUARE MILES. THE AREA IS SEMIARID AND RECEIVED ABOUT 14 TO 18 INCHES OF PRECIPITATION A YEAR. EXTINCT VOLCANOES AND THEIR EXTRUSIONS CHARACTERIZE THE AREA. MOST WELLS TAP PERMEABLE BASALT OR CINDERY RUBBLE BENEATH THE LACUSTRINE BEDS. THE DEPTHS OF WELLS RANGE FROM LESS THAN 50 TO NEARLY 2,000 FEET--MOST ARE BETWEEN 100 AND 1,000 FEET DEEP. FLOWING WELLS OCCUR IN ALL AREAS EXCEPT SWAN LAKE VALLEY. THE MOST EXTENSIVE AREA OF FLOWING WELLS IS IN THE SPRAGUE RIVER VALLEY, WHERE ABOUT 25 WELLS, SOME FLOWING MORE THAN 2,000 GPM, SUPPLY WATER FOR IRRIGATION. WATER LEVELS IN WELLS FLUCTUATE SEASONALLY FROM 1 TO 4 FEET. GROUNDWATER IN THE BASIN IS OF EXCELLENT QUALITY FOR DRINKING, IRRIGATION, AND MOST INDUSTRIAL USES.

  18. Technology and manufacturing process selection the product life cycle perspective

    CERN Document Server

    Pecas, Paulo; Silva, Arlindo

    2014-01-01

    This book provides specific topics intending to contribute to an improved knowledge on Technology Evaluation and Selection in a Life Cycle Perspectives. Although each chapter will present possible approaches and solutions, there are no recipes for success. Each reader will find his/her balance in applying the different topics to his/her own specific situation. Case studies presented throughout will help in deciding what fits best to each situation, but most of all any ultimate success will come out of the interplay between the available solutions and the specific problem or opportunity the reader is faced with.

  19. Environmental Resources of Selected Areas of Hawaii: Ecological Resources (DRAFT)

    Energy Technology Data Exchange (ETDEWEB)

    Trettin, C.C.; Tolbert, V.R.; Jones, A.T.; Smith, C.R.; Kalmijn, A.J.

    1994-06-01

    This report has been prepared to make available and archive the background scientific data and related information collected on ecological resources during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. The U.S. Department of Energy (COE) published a notice in the Federal Register on May 17, 1994 (Fed. Regist. 5925638) withdrawing its Notice of Intent (Fed. Regst. 575433) of February 14, 1992, to prepare the HGP-EIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. The background scientific data and related information presented in this report focus on several areas of Hawaii County, including the southeastern coast, a potential development corridor along the Saddle Road between Hilo and the North Kohala District on the northwestern coast, and on the southeastern coast of Maui. In this report, reference is made to these areas as study areas rather than as areas where proposed or alternative facilities of the HGP would be located. The resource areas addressed herein include terrestrial ecology, aquatic ecology, and marine ecology. The scientific background data and related information is being made available for future research in these areas. This report describes the environmental resources present in the areas studied (i.e., the affected environment) and does not represent an assessment of environmental impacts.

  20. Defense Technology Objectives of the Joint Warfighting Science and Technology and Defense Technology Area Plan.

    Science.gov (United States)

    1996-05-01

    utilizing these agent impermeable membranes. By FY98, develop and conduct physiological testing of a series of microencapsulated phase change materials...bases and depots, as well as civilian areas. By the end of FY02, demonstrate efficacy of enzymatic decontamination system for G and V-type nerve agents

  1. Assessing consumer benefits of selected gas appliance technology center tasks. Topical report, April-December 1992

    International Nuclear Information System (INIS)

    Smith, T.R.; Bournakis, A.D.; Worek, W.M.; Kalensky, D.C.; Dombrowski, L.P.

    1992-12-01

    The Gas Appliance Technology Center (GATC) was created in 1983 to assist the gas industry in bringing about a new generation of reasonably priced, advanced gas appliances. The objective of the report is to evaluate consumer benefits of sixteen selected GATC tasks for the time period between 1983 and 1990. Tasks were selected for review based upon their degree of industry impact and how well they represented activities in the four targeted research areas of Space Conditioning, Commercial Appliances, Residential Appliances, and Codes and Standards

  2. Technologies of Selective Energy Supply at Evaporation of Food Solutes

    Directory of Open Access Journals (Sweden)

    Burdo O.G.

    2017-04-01

    Full Text Available The aim of the research is to create innovative evaporating equipment that can produce concentrates with a high content of solids, with a low level of thermal effects on raw materials. The significance of the solution of technological problems of the key process of food technologies - concentration of liquid solutions (juices, extracts, etc. is shown. Problems and scientific contradictions are formulated and the hypothesis on using of electromagnetic energy sources for direct energy transfer to solution’s moisture has been offered. The prospects of such an energy effect are proved by the energy management methods. The schemes of fuel energy conversion for the conventional thermal concentration technology and the innovative plant based on the electromagnetic energy generators are presented. By means of the similarity theory the obtained model is transformed to the criterial one depicted kinetic of evaporation process at the electromagnetic field action. The dimensionless capacity of the plant is expressed by the dependence between the Energetic effect number and relative moisture content. The scheme of automated experimental system for study of the evaporation process in the microwave field is shown. The experimental results of juice evaporation are presented. It has been demonstrated that the technologies of selective energy supply represent an effective tool for improvement of juice concentration evaporative plants. The main result of the research is design of the evaporator that allows reaching juice concentrates with °brix 95 at the temperature as low as 35 °С, i.e. 2…3 times superior than traditional technologies.

  3. Environmental resources of selected areas of Hawaii: Ecological resources

    Energy Technology Data Exchange (ETDEWEB)

    Trettin, C.C.; Tolbert, V.R. [Oak Ridge National Lab., TN (United States). Environmental Sciences Div.; Jones, A.T. [Jones (Anthony T.), Vancouver, British Columbia (Canada); Smith, C.R. [Smith (Craig R.), Kailna, HI (United States); Kalmijn, A.J. [Kalmijn (Adrianus J.), Encinitas, CA (United States)

    1995-03-01

    This report has been prepared to make available and archive the background scientific data and related information collected on ecological resources during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. The background scientific data and related information presented in this report focus on several areas of Hawaii County. In this report, reference is made to these areas as study areas rather than as areas where proposed or alternative facilities of the HGP would be located. The resource areas addressed herein include terrestrial ecology, aquatic ecology, and marine ecology. The scientific background data and related information that were obtained from review of the (1) scientific literature, (2) government and private sector reports, (3) studies done under DOE interagency agreements with the US Fish and Wildlife Service (FWS) and with the US Army Corps of Engineers (COE), and (4) observations made during site visits are being made available for future research in these areas.

  4. Environmental resources of selected areas of Hawaii: Ecological resources

    International Nuclear Information System (INIS)

    Trettin, C.C.; Tolbert, V.R.; Smith, C.R.; Kalmijn, A.J.

    1995-03-01

    This report has been prepared to make available and archive the background scientific data and related information collected on ecological resources during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. The background scientific data and related information presented in this report focus on several areas of Hawaii County. In this report, reference is made to these areas as study areas rather than as areas where proposed or alternative facilities of the HGP would be located. The resource areas addressed herein include terrestrial ecology, aquatic ecology, and marine ecology. The scientific background data and related information that were obtained from review of the (1) scientific literature, (2) government and private sector reports, (3) studies done under DOE interagency agreements with the US Fish and Wildlife Service (FWS) and with the US Army Corps of Engineers (COE), and (4) observations made during site visits are being made available for future research in these areas

  5. A survey on draught animal technology (DAT) in EN-Nhoud area, North Kordofan State, Sudan.

    Science.gov (United States)

    Makki, Elsamawal Khalil; Musa, Ezdehar Omer Mohammed

    2011-06-01

    Draught animal technology (DAT) can potentially play a central role in agriculture transformation for traditional farmers. This study surveyed the state of DAT in En-Nhoud area, North Kordofan State, Sudan in an attempt to have a clear view of the changes brought about by introducing the technology. The study followed the cross-sectional survey design. Farmers were selected from ten clusters (villages) and data were collected using questionnaires and face to face interviews with farmers in addition to group discussions with them and the different actors in the field. The results showed that farmers appreciate the role played by DAT, but they highlighted the need for further capacity building and technical backup. Harnessing issues are not well understood and applied by the farmers. The different actors involved in DAT in the area lack networking and coordination, and this reflected on the many problems and constraints faced by the farmers.

  6. mHealth Application Areas and Technology Combinations.

    Science.gov (United States)

    Abaza, Haitham; Marschollek, Michael

    2017-01-01

    With the continuous and enormous spread of mobile technologies, mHealth has evolved as a new subfield of eHealth. While eHealth is broadly focused on information and communication technologies, mHealth seeks to explore more into mobile devices and wireless communication. Since mobile phone penetration has exceeded other infrastructure in low and middle-income countries (LMICs), mHealth is seen as a promising component to provide pervasive and patient-centered care. The aim of our research work for this paper is to examine the mHealth literature to identify application areas, target diseases, and mHealth service and technology types that are most appropriate for LMICs. Based on the 2011 WHO mHealth report, a combination of search terms, all including the word "mHealth", was identified. A literature review was conducted by searching the PubMed and IEEE Xplore databases. Articles were included if they were published in English, covered an mHealth solution/intervention, involved the use of a mobile communication device, and included a pilot evaluation study. Articles were excluded if they did not provide sufficient detail on the solution covered or did not focus on clinical efficacy/effectiveness. Cross-referencing was also performed on included articles. 842 articles were retrieved and analyzed, 255 of which met the inclusion criteria. North America had the highest number of applications (n=74) followed by Europe (n=50), Asia (n=44), Africa (n=25), and Australia (n=9). The Middle East (n=5) and South America (n=3) had the least number of studies. The majority of solutions addressed diabetes (n=51), obesity (n=25), CVDs (n=24), HIV (n=18), mental health (n=16), health behaviors (n=16), and maternal and child's health (MCH) (n=11). Fewer solutions addressed asthma (n=7), cancer (n=5), family health planning (n=5), TB (n=3), malaria (n=2), chronic obtrusive pulmonary disease (COPD) (n=2), vision care (n=2), and dermatology (n=2). Other solutions targeted stroke, dental

  7. Demonstration of Airborne Wide Area Assessment Technologies at the Toussaint River, Ohio

    National Research Council Canada - National Science Library

    Foley, Jack; Wright, David

    2007-01-01

    ...) technology, a wide area assessment technology, to assist in the characterization of the shore and shallow areas in and around the Toussaint River relative to munitions contamination from historical...

  8. Tornado Protection: Selecting and Designing Safe Areas in Buildings.

    Science.gov (United States)

    Abernethy, James J.

    Tornadoes and extreme winds cause heavy loss of life and property damage throughout the United States. Most buildings offer significant protection from this danger, and building administrators should know the areas where this protection is available. This booklet presents a review of three schools, all of which were struck by tornadoes on April 3,…

  9. A stakeholder involvement approach to evaluate and enhance technology acceptance: U.S. Department of Energy Office of Technology Development's Plume Focus Area

    International Nuclear Information System (INIS)

    McCabe, G.H.; Stein, S.L.; Serie, P.J.

    1995-01-01

    The US Department of Energy (DOE) faces a major challenge in cleaning up its contaminated sites throughout the United States. One major area of concern is the plumes in soil and ground water which are contaminated with a myriad of different pollutants. DOE recently organized its plume-related problems into the Plume Focus Area. The mission of the Plume Focus Area is to enhance the deployment of innovative technologies for containing and cleaning up contaminant plumes in ground water and soil at all DOE sites. Environmental cleanup priorities for soil and ground water plumes are being defined and technology users have the challenge of matching current and innovative technologies to those priorities. By involving a range of stakeholders in the selection, demonstration, and evaluation of new technologies, the deployment of these technologies can be enhanced. If new plume cleanup technologies are to be deployable, they must improve on today's baseline technologies. The Sites' Coordination Team (SCT) of the Plume Focus Area develops and supports the implementation of methods for stakeholder involvement throughout the multiple steps that define focus area activities. Site-specific teams are being formed to carry out the strategy at each site, and the teams will work through Site Technology Coordination Groups (STCGs) at each location. The SCT is responsible for identifying the site-specific stakeholder involvement teams, training the team members, preparing needed national-level guidance and strategies, helping the teams tailor a strategy for their particular site that meets the overall needs of the focus area, and facilitating inter-site coordination. The results will be used to develop national technology acceptance reports on the innovative technologies being funded and evaluated under the Plume Focus Area

  10. Supply Selection and Supply Chain Maturity - important areas of the quality production assurance

    Directory of Open Access Journals (Sweden)

    Ivan Koblen

    2014-12-01

    Full Text Available The paper pays attention to selected information focused on the key requirements and criteria used in both the conventional supplier selection and sustainable supplier selection processes. The authors introduce the supply chain maturity levels, which, together with the supplier selection and assessment issue, is the essential area for the assurance of the high quality, safety and dependability of the products.

  11. Assessment of natural radioactivity in the selected area of Slovakia

    International Nuclear Information System (INIS)

    Porubcanova, B.; Nikodemova, D.; Mojzes, A.

    2014-01-01

    Slovakia is country which has a difficult geological structure. This fact is reflected on values of natural radionuclide concentrations. A chosen area includes various types rocks which have diverse values of radioactive concentrations. Consequently these values were shown by maps which present localities with values of a radioactivity. This research was a first step which will be used like a base for a valorization and assessment of the potential radiation exposure of residents of SR where we can suppose health damage. (authors)

  12. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram

    International Nuclear Information System (INIS)

    O'Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Volume III (this volume) provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are reference by a TEDS code number in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II. Data sheets are arranged alphanumerically by the TEDS code number in the upper right corner of each sheet

  13. Research Notes ~ Selecting Research Areas and Research Design Approaches in Distance Education: Process Issues

    Directory of Open Access Journals (Sweden)

    Sudarshan Mishra

    2004-11-01

    Full Text Available The purpose of this paper is to study the process used for selecting research areas and methodological approaches in distance education in India. Experts from the field of distance education in India were interviewed at length, with the aim of collecting qualitative data on opinions on process-issues for selecting areas for research, research design, and appropriate methodological approaches in distance education. Data collected from these interviews were subjected to content analysis; triangulation and peer consultation techniques were used for cross-checking and data verification. While the findings and recommendations of this study have limited application in that they can only be used in the specific context outlined in this paper, respondents in this study nonetheless revealed the pressing need for more process-oriented research in examining media and technology, learners and learning, and distance learning evaluation processes. Our research, which yielded interesting empirical findings, also determined that a mixed approach – one that involves both quantitative and qualitative methods – is more appropriate for conducting research in distance education in India. Qualitative evidence from our research also indicates that respondents interviewed felt that emphasis should be placed on interdisciplinary and systemic research, over that of traditional disciplinary research. Research methods such as student self-reporting, extensive and highly targeted interviews, conversation and discourse analysis, were determined to as useful for data collection for this study.

  14. Technology selection for offshore underwater small modular reactors

    International Nuclear Information System (INIS)

    Shivan, Koroush; Ballinger, Ronald; Buongiorno, Jacopo; Forsberg, Charles; Kazimi, Mujid; Todreas, Neil

    2016-01-01

    This work examines the most viable nuclear technology options for future underwater designs that would meet high safety standards as well as good economic potential, for construction in the 2030-2040 time frame. The top five concepts selected from a survey of 13 nuclear technologies were compared to a small modular pressurized water reactor (PWR) designed with a conventional layout. In order of smallest to largest primary system size where the reactor and all safety systems are contained, the top five designs were: (1) a lead-bismuth fast reactor based on the Russian SVBR-100; (2) a novel organic cooled reactor; (3) an innovative superheated water reactor; (4) a boiling water reactor based on Toshiba's LSBWR; and (5) an integral PWR featuring compact steam generators. A similar study on potential attractive power cycles was also performed. A condensing and recompression supercritical CO 2 cycle and a compact steam Rankine cycle were designed. It was found that the hull size required by the reactor, safety systems and power cycle can be significantly reduced (50-80%) with the top five designs compared to the conventional PWR. Based on the qualitative economic consideration, the organic cooled reactor and boiling water reactor designs are expected to be the most cost effective options

  15. Technology selection for offshore underwater small modular reactors

    Energy Technology Data Exchange (ETDEWEB)

    Shivan, Koroush; Ballinger, Ronald; Buongiorno, Jacopo; Forsberg, Charles; Kazimi, Mujid; Todreas, Neil [Dept. of Nuclear Science and Engineering, Massachusetts Institute of Technology, Cambridge (United States)

    2016-12-15

    This work examines the most viable nuclear technology options for future underwater designs that would meet high safety standards as well as good economic potential, for construction in the 2030-2040 time frame. The top five concepts selected from a survey of 13 nuclear technologies were compared to a small modular pressurized water reactor (PWR) designed with a conventional layout. In order of smallest to largest primary system size where the reactor and all safety systems are contained, the top five designs were: (1) a lead-bismuth fast reactor based on the Russian SVBR-100; (2) a novel organic cooled reactor; (3) an innovative superheated water reactor; (4) a boiling water reactor based on Toshiba's LSBWR; and (5) an integral PWR featuring compact steam generators. A similar study on potential attractive power cycles was also performed. A condensing and recompression supercritical CO{sub 2} cycle and a compact steam Rankine cycle were designed. It was found that the hull size required by the reactor, safety systems and power cycle can be significantly reduced (50-80%) with the top five designs compared to the conventional PWR. Based on the qualitative economic consideration, the organic cooled reactor and boiling water reactor designs are expected to be the most cost effective options.

  16. Technology Selection for Offshore Underwater Small Modular Reactors

    Directory of Open Access Journals (Sweden)

    Koroush Shirvan

    2016-12-01

    Full Text Available This work examines the most viable nuclear technology options for future underwater designs that would meet high safety standards as well as good economic potential, for construction in the 2030–2040 timeframe. The top five concepts selected from a survey of 13 nuclear technologies were compared to a small modular pressurized water reactor (PWR designed with a conventional layout. In order of smallest to largest primary system size where the reactor and all safety systems are contained, the top five designs were: (1 a lead–bismuth fast reactor based on the Russian SVBR-100; (2 a novel organic cooled reactor; (3 an innovative superheated water reactor; (4 a boiling water reactor based on Toshiba's LSBWR; and (5 an integral PWR featuring compact steam generators. A similar study on potential attractive power cycles was also performed. A condensing and recompression supercritical CO2 cycle and a compact steam Rankine cycle were designed. It was found that the hull size required by the reactor, safety systems and power cycle can be significantly reduced (50–80% with the top five designs compared to the conventional PWR. Based on the qualitative economic consideration, the organic cooled reactor and boiling water reactor designs are expected to be the most cost effective options.

  17. Technology readiness levels and technology status for selected long term/high payoff technologies on the RLV program

    Science.gov (United States)

    Rosmait, Russell L.

    1996-01-01

    The development of a new space transportation system in a climate of constant budget cuts and staff reductions can be and is a difficult task. It is no secret that NASA's current launching system consumes a very large portion of NASA funding and requires a large army of people to operate & maintain the system. The new Reusable Launch Vehicle (RLV) project and it's programs are faced with a monumental task of making the cost of access to space dramatically lower and more efficient than NASA's current system. With pressures from congressional budget cutters and also increased competition and loss of market share from international agencies RLV's first priority is to develop a 'low-cost, reliable transportation to earth orbit.' One of the RLV's major focus in achieving low-cost, reliable transportation to earth orbit is to rely on the maturing of advanced technologies. The technologies for the RLV are numerous and varied. Trying to assess their current status, within the RLV development program is paramount. There are several ways to assess these technologies. One way is through the use of Technology Readiness Levels (TRL's). This project focused on establishing current (summer 95) 'worst case' TRL's for six selected technologies that are under consideration for use within the RLV program. The six technologies evaluated were Concurrent Engineering, Embedded Sensor Technology, Rapid Prototyping, Friction Stir Welding, Thermal Spray Coatings, and VPPA Welding.

  18. Environmental resources of selected areas of Hawaii: Socioeconomics

    Energy Technology Data Exchange (ETDEWEB)

    Saulsbury, J.W.; Sorensen, B.M.; Reed, R.M. [Oak Ridge National Lab., TN (United States); Schexnayder, S.M. [Univ. of Tennessee, Knoxville, TN (United States)

    1995-03-01

    This report has been prepared to make available and archive the background information on socioeconomic resources collected during the preparation of the environmental impact statement (EIS) for Phases 3--4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. The USDOE published a notice withdrawing its Notice of Intent to prepare the HGP EIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. This document provides background information on socioeconomic resources in Hawaii County, with particular emphasis on the Puna District. Information is being made available for use by others in conducting future socioeconomic impact assessments in this area. this report describes existing socioeconomic resources in the areas studied and does not represent an assessment of environmental impacts. The socioeconomic resources described are primarily those that would be affected by employment and population growth associated with any future large-scale development. These resource categories are population, housing, land use, economic structure, infrastructure and public services, local government revenues and expenditures, and tourism and recreation.

  19. Environmental Resources of Selected Areas of Hawaii: Socioeconomics (DRAFT)

    Energy Technology Data Exchange (ETDEWEB)

    Saulsbury, J.W.; Sorensen, B.M.; Schexnayder, S.M.

    1994-06-01

    This report has been prepared to make available and archive the background information on socioeconomic resources collected during the preparation of the Environmental Impact Statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. The U.S. Department of Energy (DOE) published a notice in the Federal Register on May 17, 1994 (Fed. Regis. 5925638), withdrawing its Notice of Intent (Fed Regis. 57:5433), of February 14, 1992, to prepare the HGPEIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. This document provides background information on socioeconomic resources in Hawaii County, with particular emphasis on the Puna District (Fig. 1). Information is being made available for use by others in conducting future socioeconomic impact assessments in this area. This report describes existing socioeconomic resources in the areas studied (i.e., the affected environment) and does not represent an assessment of environmental impacts. The socioeconomic resources described are primarily those that would be affected by employment and population growth associated with any future large-scale development. These resource categories are (1) population, (2) housing, (3) land use, (4) economic structure (primarily employment and income), (5) infrastructure and public services (education, ground transportation, police and fire protection, water, wastewater, solid waste disposal, electricity, and emergency planning), (6) local government revenues and expenditures, and (7) tourism and recreation.

  20. SELECTION OF SUSTAINABLE TECHNOLOGIES FOR COMBUSTION OF BOSNIAN COALS

    Directory of Open Access Journals (Sweden)

    Anes Kazagić

    2010-01-01

    Full Text Available This paper deals with optimization of coal combustion conditions to support selection a sustainable combustion technology and an optimal furnace and boiler design. A methodology for optimization of coal combustion conditions is proposed and demonstrated on the example of Bosnian coals. The properties of Bosnian coals vary widely from one coal basin to the next, even between coal mines within the same basin. Very high percentage of ash (particularly in Bosnian brown coal makes clear certain differences between Bosnian coal types and other world coal types, providing a strong argument for investigating specific problems related to the combustion of Bosnian coals, as well as ways to improve their combustion behaviour. In this work, options of the referent energy system (boiler with different process temperatures, corresponding to the different combustion technologies; pulverised fuel combustion (slag tap or dry bottom furnace and fluidized bed combustion, are under consideration for the coals tested. Sustainability assessment, based on calculation economic and environment indicators, in combination with common low cost planning method, is used for the optimization. The total costs in the lifetime are presented by General index of total costs, calculated on the base of agglomeration of basic economic indicators and the economic indicators derived from environmental indicators. So, proposed methodology is based on identification of those combustion technologies and combustion conditions for coals tested for which the total costs in lifetime of the system under consideration are lowest, provided that all environmental issues of the energy system is fulfilled during the lifetime. Inputs for calculation of the sustainability indicators are provided by the measurements on an experimental furnace with possibility of infinite variation of process temperature, supported by good praxis from the power plants which use the fuels tested and by thermal

  1. Smartphone technologies and Bayesian networks to assess shorebird habitat selection

    Science.gov (United States)

    Zeigler, Sara; Thieler, E. Robert; Gutierrez, Ben; Plant, Nathaniel G.; Hines, Megan K.; Fraser, James D.; Catlin, Daniel H.; Karpanty, Sarah M.

    2017-01-01

    Understanding patterns of habitat selection across a species’ geographic distribution can be critical for adequately managing populations and planning for habitat loss and related threats. However, studies of habitat selection can be time consuming and expensive over broad spatial scales, and a lack of standardized monitoring targets or methods can impede the generalization of site-based studies. Our objective was to collaborate with natural resource managers to define available nesting habitat for piping plovers (Charadrius melodus) throughout their U.S. Atlantic coast distribution from Maine to North Carolina, with a goal of providing science that could inform habitat management in response to sea-level rise. We characterized a data collection and analysis approach as being effective if it provided low-cost collection of standardized habitat-selection data across the species’ breeding range within 1–2 nesting seasons and accurate nesting location predictions. In the method developed, >30 managers and conservation practitioners from government agencies and private organizations used a smartphone application, “iPlover,” to collect data on landcover characteristics at piping plover nest locations and random points on 83 beaches and barrier islands in 2014 and 2015. We analyzed these data with a Bayesian network that predicted the probability a specific combination of landcover variables would be associated with a nesting site. Although we focused on a shorebird, our approach can be modified for other taxa. Results showed that the Bayesian network performed well in predicting habitat availability and confirmed predicted habitat preferences across the Atlantic coast breeding range of the piping plover. We used the Bayesian network to map areas with a high probability of containing nesting habitat on the Rockaway Peninsula in New York, USA, as an example application. Our approach facilitated the collation of evidence-based information on habitat selection

  2. Vulnerabilities in GSM technology and feasibility of selected attacks

    Science.gov (United States)

    Voznak, M.; Prokes, M.; Sevcik, L.; Frnda, J.; Toral-Cruz, Homer; Jakovlev, Sergej; Fazio, Peppino; Mehic, M.; Mikulec, M.

    2015-05-01

    Global System for Mobile communication (GSM) is the most widespread technology for mobile communications in the world and serving over 7 billion users. Since first publication of system documentation there has been notified a potential safety problem's occurrence. Selected types of attacks, based on the analysis of the technical feasibility and the degree of risk of these weaknesses, were implemented and demonstrated in laboratory of the VSB-Technical University of Ostrava, Czech Republic. These vulnerabilities were analyzed and afterwards possible attacks were described. These attacks were implemented using open-source tools, software programmable radio USRP (Universal Software RadioPeripheral) and DVB-T (Digital Video Broadcasting - Terrestrial) receiver. GSM security architecture is being scrutinized since first public releases of its specification mainly pointing out weaknesses in authentication and ciphering mechanisms. This contribution also summarizes practically proofed and used scenarios that are performed using opensource software tools and variety of scripts mostly written in Python. Main goal of this paper is in analyzing security issues in GSM network and practical demonstration of selected attacks.

  3. Making Artificial Heart Components – Selected Aspects Of Casting Technology

    Directory of Open Access Journals (Sweden)

    Sobczak J.J.

    2015-09-01

    Full Text Available This study shown possibilities of Rapid Prototyping techniques (RP and metal casting simulation software (MCSS, including non inertial reference systems. RP and MCSS have been used in order to design and produce essential elements for artificial heart. Additionally it has been shown possibilities of Fused Deposition Modeling (FDM technique and DodJet technology using prototyped elements of rotodynamic pump. MAGMASOFT® software allowed to verify the cast kit heart valves model. Optical scanner Atos III enabled size verification of experimental elements supplied by rapid prototyping together with metal casting elements. Due to the selection of ceramic materials and assessment of molten metal – ceramic reactivity at high temperatures together with pattern materials selection model it was possible to design, manufacture a ceramic mould for titanium based alloys. The casting structure modification has been carried out by means of high isostatic pressure technique (HIP. The quality assessment of the casting materials has been performed using X-ray fluorescence (XRF, ARL 4460 Optical Emission Spectrometer, metallographic techniques and X-ray computed tomography.

  4. Technology strategy for subsea processing and transport; Technology Target Areas; TTA6 - Subsea processing and transportation

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    OG21 (www.OG21.org) Norway's official technology strategy for the petroleum sector issued a revised strategy document in November 2005 (new strategy planned in 2009). In this document 'Subsea processing and transport' was identified as one of the eight new technology target areas (TTAs). The overall OG21 strategy document is on an aggregated level, and therefore the Board of OG21 decided that a sub-strategy for each TTA was needed. This document proposes the sub-strategy for the technology target area 'Subsea processing and transport' which covers the technology and competence necessary to effectively transport well stream to a platform or to onshore facilities. This includes multiphase flow modelling, flow assurance challenges to avoid problems with hydrates, asphaltenes and wax, subsea or downhole fluid conditioning including bulk water removal, and optionally complete water removal, and sand handling. It also covers technologies to increase recovery by pressure boosting from subsea pumping and/or subsea compression. Finally it covers technologies to facilitate subsea processing such as control systems and power supply. The vision of the Subsea processing and transport TTA is: Norway is to be the leading international knowledge- and technology cluster in subsea processing and transport: Sustain increased recovery and accelerated production on the NCS by applying subsea processing and efficient transport solutions; Enable >500 km gas/condensate multiphase well stream transport; Enable >200 km oil-dominated multiphase well stream transport; Enable well stream transport of complex fluids; Enable subsea separation, boosting compression, and water injection; Enable deepwater developments; Enable environmentally friendly and energy efficient field development. Increase the export of subsea processing and transport technology: Optimize technology from the NCS for application worldwide; Develop new technology that can meet the challenges found in

  5. Radon in dwellings in selected areas of Ireland

    International Nuclear Information System (INIS)

    Madden, J.S.; Duffy, J.T.; Mackin, G.A.; Colgan, P.A.; McGarry, A.T.

    1994-10-01

    This report presents and interprets the results of surveys of domestic radon concentrations carried out by the Radiological Protection Institute of Ireland between 1989 and 1992. Data from low-density monitoring surveys in counties Mayo, Galway (including the Aran Island of Inis Mor) and Clare and in north Kerry, in addition to more detailed surveys in Moycullen and Salthill in Co. Galway and south Cork city are presented. The highest seasonally-corrected radon level found in any of the 1755 dwellings surveyed was 2399 Bq/m 3 . This is twelve times the national Reference Level of 200 Bq/m 3 , and corresponds to an annual radiation dose to occupants of the house of 60 mSv, three times the maximum dose which radiation workers are allowed to receive under internationally-accepted standards. Statistical evaluation of the data has allowed classification of 10 km grid square areas on the basis of the predicted proportion of houses in each grid square with radon levels in excess of the national Reference Level, 200 Bq/m 3 . The most affected areas occur in counties Mayo and Galway, and to a lesser extent in south-east Cork city. In county Galway six grid squares are predicted to have more than 20% of houses with radon concentrations in excess of 200 Bq/m 3 . In the most affected grid square 30% of houses are predicted to have radon concentrations in excess of this level. It is important that householders in these areas be strongly encouraged to have the radon levels in their houses measured in order to identify the individual houses in which remedial measures are required. The risk associated with longterm exposure to radon has been calculated using the latest risk factor recommended by the International Commission on Radiological Protection. For average residents exposed to indoor radon concentrations of 200 Bq/m 3 the estimated lifetime risk of premature death from lung cancer, due to radon, is about 2%. This risk is a significant addition to the prevailing lifetime

  6. R and D areas for next generation desalination and water purification technologies

    International Nuclear Information System (INIS)

    Raha, A.; Rao, I.S.; Srivastava, V.K.; Tewari, P.K.

    2007-01-01

    By 2020, desalination and water purification technologies are expected to contribute significantly to ensure a safe, sustainable, affordable and adequate water supply. The cost of producing water from the current generation desalination technologies has declined over time at a rate of only approximately 4% per year. So we need to accelerate our research and development (R and D) activities with a near and long term objective for evolution of current generation desalination technology and to create revolutionary next generation advanced desalination and water purification technologies which will offer a promise of step reduction in cost of producing water. There are five broad technological areas-thermal technologies, membrane technologies, alternate technologies, concentrate management technologies, reuse and recycle technologies that encompass the spectrum of desalination technology. In this paper high priority research areas in all the above technologies areas are discussed to make decision about research direction that will help to mitigate our nation's future water supply challenges. (author)

  7. DECISION ANALYSIS SCIENCE MODELING FOR APPLICATION AND FIELDING SELECTION APPLIED TO EQUIPMENT DISMANTLEMENT TECHNOLOGIES

    International Nuclear Information System (INIS)

    Ebadian, M.A.

    1999-01-01

    The dismantlement of radioactively contaminated process equipment is a major concern during the D and D process. There are an estimated 1,200 buildings in the DOE-EM complex that will require the dismantlement of equipment and various metal structures. As buildings undergo the D and D process, this metallic equipment contaminated with radionuclides such as uranium and plutonium must be size-reduced before final disposal. A single information source comparing dismantlement technologies in the areas of safety, cost, and performance is needed by DOE managers and is not currently available. The selection of the appropriate technologies to meet the dismantlement objectives for a given site is a difficult process in the absence of comprehensive and comparable data. Choosing the wrong technology could result in increased exposure of personnel to contaminants and an increase in D and D project costs. The purpose of this investigation was to evaluate commercially available and innovative technologies for equipment dismantlement and provide a comprehensive source of information to the D and D community in the areas of technology performance, cost, and health and safety

  8. Area- and energy-efficient CORDIC accelerators in deep sub-micron CMOS technologies

    Science.gov (United States)

    Vishnoi, U.; Noll, T. G.

    2012-09-01

    The COordinate Rotate DIgital Computer (CORDIC) algorithm is a well known versatile approach and is widely applied in today's SoCs for especially but not restricted to digital communications. Dedicated CORDIC blocks can be implemented in deep sub-micron CMOS technologies at very low area and energy costs and are attractive to be used as hardware accelerators for Application Specific Instruction Processors (ASIPs). Thereby, overcoming the well known energy vs. flexibility conflict. Optimizing Global Navigation Satellite System (GNSS) receivers to reduce the hardware complexity is an important research topic at present. In such receivers CORDIC accelerators can be used for digital baseband processing (fixed-point) and in Position-Velocity-Time estimation (floating-point). A micro architecture well suited to such applications is presented. This architecture is parameterized according to the wordlengths as well as the number of iterations and can be easily extended for floating point data format. Moreover, area can be traded for throughput by partially or even fully unrolling the iterations, whereby the degree of pipelining is organized with one CORDIC iteration per cycle. From the architectural description, the macro layout can be generated fully automatically using an in-house datapath generator tool. Since the adders and shifters play an important role in optimizing the CORDIC block, they must be carefully optimized for high area and energy efficiency in the underlying technology. So, for this purpose carry-select adders and logarithmic shifters have been chosen. Device dimensioning was automatically optimized with respect to dynamic and static power, area and performance using the in-house tool. The fully sequential CORDIC block for fixed-point digital baseband processing features a wordlength of 16 bits, requires 5232 transistors, which is implemented in a 40-nm CMOS technology and occupies a silicon area of 1560 μm2 only. Maximum clock frequency from circuit

  9. Environmental resources of selected areas of Hawaii: Geological hazards

    Energy Technology Data Exchange (ETDEWEB)

    Staub, W.P.; Reed, R.M.

    1995-03-01

    This report has been prepared to make available and archive the background scientific data and related information collected on geologic hazards during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. The US Department of Energy (DOE) published a notice withdrawing its Notice of Intent to prepare the HGP-EIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. This report presents a review of current information on geologic hazards in the Hawaiian Islands. Interrelationships among these hazards are discussed. Probabilities of occurrence of given geologic hazards are provided in various regions where sufficient geologic or historical data are available. Most of the information contained herein is compiled from recent US Geological Survey (USGS) publications and USGS open-file reports related to this project. This report describes the natural geologic hazards present in the area and does not represent an assessment of environmental impacts. Geologic hazards originate both onshore and offshore. Onshore geologic hazards such as volcanic eruptions, earthquakes, surface rupture, landslides, uplift and subsidence occur mainly on the southern third of the island of Hawaii (hereinafter referred to as Hawaii). Offshore geologic hazards are more widely distributed throughout the Hawaiian Islands. Examples of offshore geologic hazards are submarine landslides, turbidity currents, and seismic sea waves (tsunamis).

  10. Environmental Resources of Selected Areas of Hawaii: Geological Hazards (DRAFT)

    Energy Technology Data Exchange (ETDEWEB)

    Staub, W.P.

    1994-06-01

    This report has been prepared to make available and archive the background scientific data and related information collected on geologic hazards during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. The U.S. Department of Energy (DOE) published a notice in the Federal Register on May 17, 1994 (Fed Regis. 5925638) withdrawing its Notice of Intent (Fed Regis. 575433) of February 14, 1992, to prepare the HGP-EIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated This report presents a review of current information on geologic hazards in the Hawaiian Islands. Interrelationships among these hazards are discussed. Probabilities of occurrence of given geologic hazards are provided in various regions where sufficient geologic or historical data are available. Most of the information contained herein is compiled from recent U.S. Geological Survey (USGS) publications and open-file reports. This report describes the natural geologic hazards present in the area and does not represent an assessment of environmental impacts. Geologic hazards originate both onshore and offshore. Onshore geologic hazards such as volcanic eruptions, earthquakes, surface rupture, landslides, uplift, and subsidence occur mainly on the southern third of the island of Hawaii (hereinafter referred to as Hawaii). Offshore geologic hazards are more widely distributed throughout the Hawaiian Islands. Examples of offshore geologic hazards are submarine landslides, turbidity currents, and seismic sea waves (tsunamis). First, overviews of volcanic and earthquake activity, and details of offshore geologic hazards is provided for the Hawaiian Islands. Then, a more detailed discussion of onshore geologic hazards is presented with special emphasis on the southern third of Hawaii and the east rift

  11. Feasibility of water purification technology in rural areas of developing countries.

    Science.gov (United States)

    Johnson, Dana M; Hokanson, David R; Zhang, Qiong; Czupinski, Kevin D; Tang, Jinxian

    2008-08-01

    Water scarcity is threatening social and economic growth in rural areas of developing countries. There are potential markets for water purification technologies in these regions. The main focus of this article is to evaluate the social, economic and political feasibilities of providing water purification technologies to rural areas of developing countries. The findings of this research can serve as the basis for private investors interested in entering this market. Four representative regions were selected for the study. Economic, demographic, and environmental variables of each region were collected and analyzed along with domestic markets and political information. Rural areas of the developing world are populated with poor people unable to fulfill the basic needs for clean water and sanitation. These people represent an important group of potential users. Due to economic, social, and political risks in these areas, it is difficult to build a strong case for any business or organization focusing on immediate returns on capital investment. A plausible business strategy would be to approach the water purification market as a corporate responsibility and social investing in the short term. This would allow an organization to be well positioned once the economic ability of individuals, governments, and donor agencies are better aligned.

  12. Application of smart grid technologies in developing areas

    NARCIS (Netherlands)

    Klaassen, E.A.M.; Asare-Bediako, B.; Kling, W.L.; Balkema, A.J.

    2013-01-01

    The United Nations has set the ambitious goal of assuring universal access to modern energy by 2030. Nowadays there are a lot of technical opportunities available to achieve these goals in an efficient way using smart grid technologies. However the extent to which these technologies are being

  13. The Mixed Waste Management Facility: Technology selection and implementation plan, Part 2, Support processes

    International Nuclear Information System (INIS)

    Streit, R.D.; Couture, S.A.

    1995-03-01

    The purpose of this document is to establish the foundation for the selection and implementation of technologies to be demonstrated in the Mixed Waste Management Facility, and to select the technologies for initial pilot-scale demonstration. Criteria are defined for judging demonstration technologies, and the framework for future technology selection is established. On the basis of these criteria, an initial suite of technologies was chosen, and the demonstration implementation scheme was developed. Part 1, previously released, addresses the selection of the primary processes. Part II addresses process support systems that are considered ''demonstration technologies.'' Other support technologies, e.g., facility off-gas, receiving and shipping, and water treatment, while part of the integrated demonstration, use best available commercial equipment and are not selected against the demonstration technology criteria

  14. Selection and Evaluation of Priority Domains in Global Energy Internet Standard Development Based on Technology Foresight

    Science.gov (United States)

    Jin, Yang; Ciwei, Gao; Jing, Zhang; Min, Sun; Jie, Yu

    2017-05-01

    The selection and evaluation of priority domains in Global Energy Internet standard development will help to break through limits of national investment, thus priority will be given to standardizing technical areas with highest urgency and feasibility. Therefore, in this paper, the process of Delphi survey based on technology foresight is put forward, the evaluation index system of priority domains is established, and the index calculation method is determined. Afterwards, statistical method is used to evaluate the alternative domains. Finally the top four priority domains are determined as follows: Interconnected Network Planning and Simulation Analysis, Interconnected Network Safety Control and Protection, Intelligent Power Transmission and Transformation, and Internet of Things.

  15. Semantic Wavelet-Induced Frequency-Tagging (SWIFT Periodically Activates Category Selective Areas While Steadily Activating Early Visual Areas.

    Directory of Open Access Journals (Sweden)

    Roger Koenig-Robert

    Full Text Available Primate visual systems process natural images in a hierarchical manner: at the early stage, neurons are tuned to local image features, while neurons in high-level areas are tuned to abstract object categories. Standard models of visual processing assume that the transition of tuning from image features to object categories emerges gradually along the visual hierarchy. Direct tests of such models remain difficult due to confounding alteration in low-level image properties when contrasting distinct object categories. When such contrast is performed in a classic functional localizer method, the desired activation in high-level visual areas is typically accompanied with activation in early visual areas. Here we used a novel image-modulation method called SWIFT (semantic wavelet-induced frequency-tagging, a variant of frequency-tagging techniques. Natural images modulated by SWIFT reveal object semantics periodically while keeping low-level properties constant. Using functional magnetic resonance imaging (fMRI, we indeed found that faces and scenes modulated with SWIFT periodically activated the prototypical category-selective areas while they elicited sustained and constant responses in early visual areas. SWIFT and the localizer were selective and specific to a similar extent in activating category-selective areas. Only SWIFT progressively activated the visual pathway from low- to high-level areas, consistent with predictions from standard hierarchical models. We confirmed these results with criterion-free methods, generalizing the validity of our approach and show that it is possible to dissociate neural activation in early and category-selective areas. Our results provide direct evidence for the hierarchical nature of the representation of visual objects along the visual stream and open up future applications of frequency-tagging methods in fMRI.

  16. Monolithic mode locked DBR laser with multiple-bandgap MQW structure realized by selective area growth

    Energy Technology Data Exchange (ETDEWEB)

    Schilling, M.; Bouayad-Amine, J.; Feeser, T.; Haisch, H.; Kuehn, E.; Lach, E.; Satzke, K.; Weber, J.; Zielinski, E. [Alcatel Telecom, Stuttgart (Germany). Research Div.

    1996-12-31

    The realization of novel monolithically integrated multiple-segment pulse laser sources in InGaAsP MQW technology is reported. The MQW layers for all functional sections of these devices, the modulator, the active (gain) and the passive waveguide, as well as the Bragg section were grown in a single selective area growth (SAG) step by LP-MOVPE on SiO{sub 2} patterned 2 inch InP substrates. Due to a properly selected pattern geometry 3 different bandgap regions with smooth interfaces are thereby formed along the laser cavity. The more than 4 mm long DBR lasers which exhibit a threshold current as low as 30 mA were mode locked by an intra-cavity electroabsorption modulator applying a sinusoidal voltage at around 10 GHz. In this way an optical pulse train with pulse widths < 13 ps (measured with a streak camera) and high extinction ratio was generated. A time-bandwidth product of 0.5 close to the Fourier limit is obtained. This device is very attractive for signal generation in 40 Gb/s OTDM transmission systems at 1.55 {micro}m wavelength.

  17. Evaluation and selection of energy technologies using an integrated graph theory and analytic hierarchy process methods

    Directory of Open Access Journals (Sweden)

    P. B. Lanjewar

    2016-06-01

    Full Text Available The evaluation and selection of energy technologies involve a large number of attributes whose selection and weighting is decided in accordance with the social, environmental, technical and economic framework. In the present work an integrated multiple attribute decision making methodology is developed by combining graph theory and analytic hierarchy process methods to deal with the evaluation and selection of energy technologies. The energy technology selection attributes digraph enables a quick visual appraisal of the energy technology selection attributes and their interrelationships. The preference index provides a total objective score for comparison of energy technologies alternatives. Application of matrix permanent offers a better appreciation of the considered attributes and helps to analyze the different alternatives from combinatorial viewpoint. The AHP is used to assign relative weights to the attributes. Four examples of evaluation and selection of energy technologies are considered in order to demonstrate and validate the proposed method.

  18. Low-level radioactive waste technology: a selected, annotated bibliography. [416 references

    Energy Technology Data Exchange (ETDEWEB)

    Fore, C.S.; Carrier, R.F.; Brewster, R.H.; Hyder, L.K.; Barnes, K.A.

    1981-10-01

    This annotated bibliography of 416 references represents the third in a series to be published by the Hazardous Materials Information Center containing scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on disposal site, environmental transport, and waste treatment studies as well as general reviews on the subject. The publication covers both domestic and foreign literature for the period 1951 to 1981. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology, and Site Resources; Regulatory and Economic Aspects; Social Aspects; Transportation Technology; Waste Production; and Waste Treatment. Entries in each of the chapters are further classified as a field study, laboratory study, theoretical study, or general overview involving one or more of these research areas.

  19. Selection of areas for testing in the Eleana formation: Paleozoic geology of western Yucca Flat

    Energy Technology Data Exchange (ETDEWEB)

    Sweeney, J J

    1984-07-01

    The Paleozoic geology of NTS is reviewed to select an area for underground nuclear testing in shale. Constraints on possible areas, dictated by test program requirements and economics, are areas with topographic slope less than 5/sup 0/, depths to working point less than 3000 ft., and working points above the water table. The rock formation selected is Unit J (argillite) of the Mississippian age Eleana Formation. Within NTS, Western Yucca Flat is selected as the best area to meet the requirements. Details of the Paleozoic structure of western Yucca Flat are presented. The interpretation is based on published maps, cross-sections, and reports as well as borehole, refraction seismic, and gravity data. In terms of subsurface structure and areas where Eleana Formation Unit J occurs at depths between 500 ft to 3000 ft, four possible testing areas are identified. The areas are designated here as A, B, C and the Gravity High. Available data on the water table (static water level) is reviewed for western Yucca Flat area. Depth to the water table increases from 500 to 600 ft in Area A to 1500 ft or more in the Gravity High area. Review of the water table data rules out area A and B for testing in argillite above the water table. Area C is relatively unexplored and water conditions are unknown there. Thus, the Gravity High is selected as the most promising area for selecting testing sites. There is a dolomite thrust sheet of unknown thickness overlying the argillite in the Gravity High area. An exploration program is proposed to better characterize this structure. Finally, recommendations are made for procedures to follow for eventual site characterization of a testing site in argillite. 22 references, 12 figures, 1 table.

  20. Preliminary area selection considerations for radioactive waste repositories in bedded salt

    International Nuclear Information System (INIS)

    Wagoner, J.L.; Steinborn, T.L.

    1979-01-01

    This guide describes an approach to selection of areas of bedded salt which contain potentially suitable sites for the storage of radioactive waste. To evaluate a site selected by a license applicant, it is necessary to understand the technical site characteristics which should be considered in the preliminary phase of site selection. These site characteristics are presented here in checklist form, and each item is accompanied by a discussion which explains its significance. These qualitative considerations are used first to select an area of interest within a broad geologic or geomorphic region. Once an area has been selected, more quantitative information must be acquired to determine whether the proposed site meets the resultations for storage of nuclear waste

  1. Sero-epidemiological study on Maedi-Visna in selected areas of ...

    African Journals Online (AJOL)

    Ovine Progressive Pneumonia- OPP) in exotic sheep breed in selected areas of Ethiopia. ELISA and Hematoxylin & Eosin (HE) staining techniques were employed to examine the serum and tissue samples respectively. ELISA test of serum ...

  2. Behavioral Risk Factors: Selected Metropolitan Area Risk Trends (SMART) MMSA Prevalence Data (2010 and Prior)

    Data.gov (United States)

    U.S. Department of Health & Human Services — 2002-2010. BRFSS SMART MMSA Prevalence land line only data. The Selected Metropolitan Area Risk Trends (SMART) project uses the Behavioral Risk Factor Surveillance...

  3. Behavioral Risk Factors: Selected Metropolitan Area Risk Trends (SMART) MMSA Prevalence Data (2011 to Present)

    Data.gov (United States)

    U.S. Department of Health & Human Services — 2011 to present. BRFSS SMART MMSA Prevalence combined land line and cell phone data. The Selected Metropolitan Area Risk Trends (SMART) project uses the Behavioral...

  4. Behavioral Risk Factors: Selected Metropolitan Area Risk Trends (SMART) County Prevalence Data (2011 to 2012)

    Data.gov (United States)

    U.S. Department of Health & Human Services — 2011 to 2012. BRFSS SMART County Prevalence combined land line and cell phone data. The Selected Metropolitan Area Risk Trends (SMART) project uses the Behavioral...

  5. Behavioral Risk Factors: Selected Metropolitan Area Risk Trends (SMART) County Prevalence Data (2010 and prior)

    Data.gov (United States)

    U.S. Department of Health & Human Services — 2002-2010. BRFSS SMART County Prevalence land line only data. The Selected Metropolitan Area Risk Trends (SMART) project uses the Behavioral Risk Factor Surveillance...

  6. SCIENCE AND TECHNOLOGY ACTIVITIES FOR CHROMIUM IN THE 100 AREAS

    Energy Technology Data Exchange (ETDEWEB)

    PETERSEN SW

    2009-07-02

    {sm_bullet} Primary Objective: Protect the Columbia River - Focus is control and treatment of contamination at or near the shoreline, which is influenced by bank storage {sm_bullet} Secondary Objective: Reduce hexavalent chromium to <48 parts per billion (ppb) in aquifer (drinking water standard) - Large plumes with isolated areas of high chromium concentrations (> 40,000 ppb), - Unknown source location(s); probably originating in reactor operation areas

  7. Area detectors technology and optics-Relations to nature

    International Nuclear Information System (INIS)

    PeIka, Jerzy B.

    2005-01-01

    Relations between natural vision and the artificial 2D imaging systems are discussed. A variety of animal vision as well as its main functional parts are briefly reviewed and compared with the artificial vision equivalents. An increasing advancement observed in human constructions of imaging devices due to recent rapid progress in science and technology is shown to resemble some sophisticated natural solutions formed by evolution in biological systems. The issues of the similarities and differences between the two kinds of vision are discussed. Main focus is put on optical systems forming the image, with special examples of the imaging systems designed to work in the region of the X-ray radiation. Examples of bio-inspired technological vision devices are presented

  8. Decision making tools for selecting sustainable wastewater treatment technologies in Thailand

    Science.gov (United States)

    Wongburi, Praewa; Park, Jae K.

    2018-05-01

    Wastewater consists of valuable resources that could be recovered or reused. Still it is under threat because of ineffective wastewater management and systems. In Thailand, less than 25% of wastewater generated may be treated while then rest is inadequately treated and sent back directly into waterbodies or the environment. Furthermore, the technologies that have been applied may be inefficient and unsustainable. Efficiency, sustainability, and simplicity are important concepts when designing an appropriate wastewater treatment system in developing countries. The objectives of this study were to review and evaluate wastewater treatment technologies and propose a method to improve or select an appropriate technology. An expert system in Excel® program was developed to determine the best solution. Sensitivity analysis was applied to compare and assess uncertainty factors. Due to the different conditions of each area, the key factor of interest was varied. Furthermore, Robust Decision Making tool was applied to determine the best way to improve existing wastewater treatment facility and to choose the most appropriate wastewater treatment technology.

  9. High surface area silicon materials: fundamentals and new technology.

    Science.gov (United States)

    Buriak, Jillian M

    2006-01-15

    Crystalline silicon forms the basis of just about all computing technologies on the planet, in the form of microelectronics. An enormous amount of research infrastructure and knowledge has been developed over the past half-century to construct complex functional microelectronic structures in silicon. As a result, it is highly probable that silicon will remain central to computing and related technologies as a platform for integration of, for instance, molecular electronics, sensing elements and micro- and nanoelectromechanical systems. Porous nanocrystalline silicon is a fascinating variant of the same single crystal silicon wafers used to make computer chips. Its synthesis, a straightforward electrochemical, chemical or photochemical etch, is compatible with existing silicon-based fabrication techniques. Porous silicon literally adds an entirely new dimension to the realm of silicon-based technologies as it has a complex, three-dimensional architecture made up of silicon nanoparticles, nanowires, and channel structures. The intrinsic material is photoluminescent at room temperature in the visible region due to quantum confinement effects, and thus provides an optical element to electronic applications. Our group has been developing new organic surface reactions on porous and nanocrystalline silicon to tailor it for a myriad of applications, including molecular electronics and sensing. Integration of organic and biological molecules with porous silicon is critical to harness the properties of this material. The construction and use of complex, hierarchical molecular synthetic strategies on porous silicon will be described.

  10. Brownfields Technology Primer: Selecting and Using Phytoremediation for Site Cleanup

    Science.gov (United States)

    This primer explains the phytoremediation process, discusses the potential advantages and considerations in selecting phytoremediation to clean up brownfields sites, and provides information on additional resources about phytoremediation.

  11. Selective Area Modification of Silicon Surface Wettability by Pulsed UV Laser Irradiation in Liquid Environment.

    Science.gov (United States)

    Liu, Neng; Moumanis, Khalid; Dubowski, Jan J

    2015-11-09

    The wettability of silicon (Si) is one of the important parameters in the technology of surface functionalization of this material and fabrication of biosensing devices. We report on a protocol of using KrF and ArF lasers irradiating Si (001) samples immersed in a liquid environment with low number of pulses and operating at moderately low pulse fluences to induce Si wettability modification. Wafers immersed for up to 4 hr in a 0.01% H2O2/H2O solution did not show measurable change in their initial contact angle (CA) ~75°. However, the 500-pulse KrF and ArF lasers irradiation of such wafers in a microchamber filled with 0.01% H2O2/H2O solution at 250 and 65 mJ/cm(2), respectively, has decreased the CA to near 15°, indicating the formation of a superhydrophilic surface. The formation of OH-terminated Si (001), with no measurable change of the wafer's surface morphology, has been confirmed by X-ray photoelectron spectroscopy and atomic force microscopy measurements. The selective area irradiated samples were then immersed in a biotin-conjugated fluorescein-stained nanospheres solution for 2 hr, resulting in a successful immobilization of the nanospheres in the non-irradiated area. This illustrates the potential of the method for selective area biofunctionalization and fabrication of advanced Si-based biosensing architectures. We also describe a similar protocol of irradiation of wafers immersed in methanol (CH3OH) using ArF laser operating at pulse fluence of 65 mJ/cm(2) and in situ formation of a strongly hydrophobic surface of Si (001) with the CA of 103°. The XPS results indicate ArF laser induced formation of Si-(OCH3)x compounds responsible for the observed hydrophobicity. However, no such compounds were found by XPS on the Si surface irradiated by KrF laser in methanol, demonstrating the inability of the KrF laser to photodissociate methanol and create -OCH3 radicals.

  12. [Information technology as a support in the area of education].

    Science.gov (United States)

    Sabanović, Z

    1999-01-01

    Decision Support Systems (DSS) are more and more used and developed, mainly within the management area. It is used at strategic level for global planning and managing the organization; at tactical level for short-term planning, process realization and control. Although many authors state that DSS are used only at global and tactical level, some of them--through practical applications--show that specific DSS can be created in order to support decision in other areas than classical management. Paper describes computer application that efficiently supports organisation of exams at The Department for Medical Informatics of Medical Faculty in Tuzla.

  13. Influences on selection of assistive technology for young children in South Africa: perspectives from rehabilitation professionals.

    Science.gov (United States)

    van Niekerk, Karin; Dada, Shakila; Tönsing, Kerstin

    2017-12-20

    Selection of assistive technology for young children is a complex process. Within a context with limited resources, such as South Africa, research is needed to determine the factors influencing the assistive technology selection process, as these could ultimately either facilitate or hinder the availability and accessibility of affordable, adaptable, acceptable, and high quality assistive technology for this age group. Two asynchronous online focus groups were conducted with 16 rehabilitation professionals to identify the factors they perceived to influence the selection and provision of assistive technology to young children within the South African context. A process of deductive thematic analysis was followed by inductive analysis of the data. Components of the Assistive Technology Device Selection Framework were used as themes to guide the deductive analysis, followed by inductive analysis to create subthemes. The important role of the professional was highlighted in negotiating all the factors to consider in the assistive technology selection and provision process. Adaptation of the Assistive Technology Device Selection Framework is suggested in order to facilitate application to low resourced contexts, such as South Africa. Implications for rehabilitation Assistive technology selection is a complex process with factors pertaining to the users (child and family) of the assistive technology, as well as the rehabilitation professional recommending the assistive technology influencing the process. Although it may be an important factor, the availability of financial resources to purchase assistive technology is not the only determining factor in providing appropriate assistive technology to young children in contexts with limited resources. Formalized support, such as reflective supervision or mentorship programs should be facilitated and utilized by recommending professionals. Home and school visits during assessment ensure a good match between assistive

  14. A hybrid method for information technology selection combining multi-criteria decision making (MCDM) with technology roadmapping

    OpenAIRE

    García Mejía, Jaime Andrés

    2013-01-01

    Abstract: Strategic information technology (IT) management has been recognized as vital for achieving competitive advantage. IT selection, the process of choosing the best technology alternative from a number of available options, is an important part of IT management. The IT selection is a multi-criteria decision making process, where relative importance of each criterion is determined and the degree of satisfaction of every criterion from each alternative is evaluated. Decision makers (DMs)...

  15. Technology-enabled employee selection: Tweaking the system for better person-environment fit

    DEFF Research Database (Denmark)

    Holm, Anna B.

    Organizations increasingly use information and communication technologies to facilitate their employee selection process. The practice is commonly referred to as e-selection. Recent research has shown that e-selection can significantly improve the efficiency of assessment and selection. However......, organizations also strive to hire the best possible candidates and seek to improve effectiveness of their selection process and achieve better person–environment (PE) fit. The presented research reviews existing literature on PE fit and e-selection and puts forward a heuristic model of technology...

  16. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II (this volume) describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Specific INEL problem areas/contaminants are identified along with technology solutions, the status of the technologies, precise science and technology needs, and implementation requirements. Volume III provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are referenced by a TEDS codenumber in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II.

  17. Reference Guide for Teaching Selected Duty Areas from Business, Marketing and Management Occupations.

    Science.gov (United States)

    Rich, John H.

    This reference guide was designed to assist business, marketing, and management educators in locating textbook/instructional materials for use in teaching duty areas and task lists for grades 11-14. Duty areas and task lists are matched with selected textbook/instructional publications for the secretarial, general office clerk, and information…

  18. SCIENCE AND TECHNOLOGY ACTIVITIES FOR CHROMIUM IN THE 100 AREAS

    International Nuclear Information System (INIS)

    Petersen, S.W.

    2009-01-01

    (sm b ullet) Primary Objective: Protect the Columbia River - Focus is control and treatment of contamination at or near the shoreline, which is influenced by bank storage (sm b ullet) Secondary Objective: Reduce hexavalent chromium to 40,000 ppb), - Unknown source location(s); probably originating in reactor operation areas

  19. A comparative study of noise pollution levels in some selected areas in Ilorin Metropolis, Nigeria.

    Science.gov (United States)

    Oyedepo, Olayinka S; Saadu, Abdullahi A

    2009-11-01

    The noise pollution is a major problem for the quality of life in urban areas. This study was conducted to compare the noise pollution levels at busy roads/road junctions, passengers loading parks, commercial, industrial and residential areas in Ilorin metropolis. A total number of 47-locations were selected within the metropolis. Statistical analysis shows significant difference (P noise pollution levels between industrial areas and low density residential areas, industrial areas and high density areas, industrial areas and passengers loading parks, industrial areas and commercial areas, busy roads/road junctions and low density areas, passengers loading parks and commercial areas and commercial areas and low density areas. There is no significant difference (P > 0.05) in noise pollution levels between industrial areas and busy roads/road junctions, busy roads/road junctions and high density areas, busy roads/road junctions and passengers loading parks, busy roads/road junctions and commercial areas, passengers loading parks and high density areas, passengers loading parks and commercial areas and commercial areas and high density areas. The results show that Industrial areas have the highest noise pollution levels (110.2 dB(A)) followed by busy roads/Road junctions (91.5 dB(A)), Passengers loading parks (87.8 dB(A)) and Commercial areas (84.4 dB(A)). The noise pollution levels in Ilorin metropolis exceeded the recommended level by WHO at 34 of 47 measuring points. It can be concluded that the city is environmentally noise polluted and road traffic and industrial machineries are the major sources of it. Noting the noise emission standards, technical control measures, planning and promoting the citizens awareness about the high noise risk may help to relieve the noise problem in the metropolis.

  20. Applications of information technology in the environmental area

    International Nuclear Information System (INIS)

    Jaeschke, A.; Page, B.

    1987-03-01

    The state of events in the environment are described by physical, chemical, meteorological and biological data. The spatially distributed information cannot be managed without technical help from automatic measuring devices, data telecommunication and process data processing. The computer-aided creation of models and simulation represent an aid involving environmental problems. One considerable extension of the possibilities will be provided by the introduction of the methods of artificial intelligence, especially expert systems. The use of information technology therefore forms an important precondition for environmental protection. The contributions illustrate the state of development of communication between scientists in the field of environmental protection. (DG) [de

  1. PROJECT W-551 INTERIM PRETREATMENT SYSTEM TECHNOLOGY SELECTION SUMMARY DECISION REPORT AND RECOMMENDATION

    International Nuclear Information System (INIS)

    CONRAD EA

    2008-01-01

    This report provides the conclusions of the tank farm interim pretreatment technology decision process. It documents the methodology, data, and results of the selection of cross-flow filtration and ion exchange technologies for implementation in project W-551, Interim Pretreatment System. This selection resulted from the evaluation of specific scope criteria using quantitative and qualitative analyses, group workshops, and technical expert personnel

  2. Application of mathematical methods of analysis in selection of competing information technologies

    Science.gov (United States)

    Semenov, V. L.; Kadyshev, E. N.; Zakharova, A. N.; Patianova, A. O.; Dulina, G. S.

    2018-05-01

    The article discusses the use of qualimetry methods using the apparatus of mathematical analysis in the formation of the integral index that allows one to select the best option among competing information technology. The authors propose the use of affine space in the evaluation and selection of competing information technologies.

  3. Selection of Possible Candidate Area for Nuclear Power Plant in Johor, Malaysia

    International Nuclear Information System (INIS)

    Nor Afifah Basri; Ahmad Termizi Ramli

    2012-01-01

    Nuclear power is considered as one of the best option for future energy development in Malaysia. Since Malaysia has no experience in nuclear energy generation, commissioning the first nuclear power plant needs tremendous effort in various aspects. Site selection is one of important step in nuclear power plant commissioning process. This paper proposes candidate sites for nuclear power plant in Mersing, Kota Tinggi, Muar and Batu Pahat district in Johor, Malaysia. The candidate selection process uses the IAEA document and AELB guideline as main reference, supported by site selection procedure by various countries. MapInfo Professional software was used to simulate the selection process for candidate areas for the nuclear power plant. This paper concluded that Tenggaroh and Jemaluang area are the most suitable area for nuclear power plant facilities in Johor, Malaysia. (Author)

  4. Selection of possible candidate area for nuclear energy facility in Johor, Malaysia

    International Nuclear Information System (INIS)

    Nor Afifah Basri; Ahmad Termizi Ramli

    2012-01-01

    Nuclear power is considered as one of the best option for future energy development in Malaysia. Since Malaysia has no experience in nuclear energy generation, commissioning the first nuclear power plant needs tremendous effort in various aspects. Site selection is one of important step in nuclear power plant commissioning process. This paper proposes candidate sites for nuclear power plant in Mersing, Kota Tinggi, Muar and Batu Pahat district in Johor, Malaysia. The candidate selection process uses the IAEA document and AELB guideline as main reference, supported by site selection procedure by various countries. MapInfo Professional software was used to stimulate the selection process for candidate areas for the nuclear power plant. This paper concluded that Tenggaroh and Jemaluang area are the most suitable area for nuclear power plant facilities in Johor, Malaysia. (Author)

  5. Implications of using clean technologies to power selected ASEAN countries

    International Nuclear Information System (INIS)

    Das, Anjana; Ahlgren, Erik O.

    2010-01-01

    This paper focuses on energy system development of the three largest Association of South East Asian Nations (ASEAN) countries: Indonesia, Philippines and Vietnam. The energy infrastructures in these counties are in the process of rapid development and, therefore, technology choices are critical. Applying the energy system model MARKAL and scenario analysis, this paper examines and quantifies the role of clean and advanced energy technologies for efficient local resource exploitation and improving energy security and environmental conditions. The main focus is on the power sector and the paper also addresses the potential ASEAN markets for European energy technologies. The paper concludes that there is a large potential market for clean and advanced energy technologies in the studied countries. If adopted, these technologies will bring several benefits like reduction in primary energy requirement, reduced investments requirement in the power sector and other parts of the energy infrastructure, reduced import of primary energy, reduced CO 2 emissions and local pollution, reduced energy system costs and marginal cost of electricity supply. Finally, barriers for transfer and diffusion of advanced energy technologies are discussed.

  6. Local area networks an introduction to the technology

    CERN Document Server

    McNamara, John E

    1985-01-01

    This concise book provides an objective introduction to local area networks - how they work, what they do, and how you can benefit from them. It outlines the pros and cons of the most common configurations so you can evaluate them in light of your own needs. You'll also learn about network software, with special emphasis on the ISO layered model of communications protocols.

  7. Technological development in the nuclear area: nuclear power production

    International Nuclear Information System (INIS)

    Lima, Jose Mendonca de.

    1991-01-01

    The factors and obstacles that influence the progress and regress of nuclear power presently are evaluated. The international policies of the industrial conglomerates and the hegemonic countries in the nuclear area are described. In the particular case of Brazil, it was tried to identify the obstacles which must be removed so that the country can reach development in this field. 35 refs., 9 figs., 9 tabs

  8. Enhancing technology acceptance: The role of the subsurface contaminants focus area external integration team

    Energy Technology Data Exchange (ETDEWEB)

    Kirwan-Taylor, H.; McCabe, G.H. [Battelle Seattle Research Center, WA (United States); Lesperance, A. [Pacific Northwest National Lab., Richland, WA (United States); Kauffman, J.; Serie, P.; Dressen, L. [EnvironIssues (United States)

    1996-09-01

    The US DOE is developing and deploying innovative technologies for cleaning up its contaminated facilities using a market-oriented approach. This report describes the activities of the Subsurface Contaminant Focus Area`s (SCFA) External Integration Team (EIT) in supporting DOE`s technology development program. The SCFA program for technology development is market-oriented, driven by the needs of end users. The purpose of EIT is to understand the technology needs of the DOE sites and identify technology acceptance criteria from users and other stakeholders to enhance deployment of innovative technologies. Stakeholders include regulators, technology users, Native Americans, and environmental and other interest groups. The success of this national program requires close coordination and communication among technology developers and stakeholders to work through all of the various phases of planning and implementation. Staff involved must be willing to commit significant amounts of time to extended discussions with the various stakeholders.

  9. Use of reproductive technology for sex selection for nonmedical reasons.

    Science.gov (United States)

    2015-06-01

    Because these practices are ethically controversial, clinics are encouraged to develop and make available their policies on the provision of nonmedical sex selection, and to accommodate their employees' decisions about whether or not to participate in such treatment. Practitioners offering assisted reproductive services are under no ethical obligation to provide or refuse to provide nonmedically indicated methods of sex selection. This document replaces two documents previously published by the ASRM Ethics Committee, titled, "Sex selection and preimplantation genetic diagnosis" (Fertil Steril 2004;82:S245-8) and "Preconception gender selection for nonmedical reasons" (Fertil Steril 2004;82:S232-5). Copyright © 2015 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  10. Microhabitat Conditions in Wyoming's Sage-Grouse Core Areas: Effects on Nest Site Selection and Success.

    Science.gov (United States)

    Dinkins, Jonathan B; Smith, Kurt T; Beck, Jeffrey L; Kirol, Christopher P; Pratt, Aaron C; Conover, Michael R

    2016-01-01

    The purpose of our study was to identify microhabitat characteristics of greater sage-grouse (Centrocercus urophasianus) nest site selection and survival to determine the quality of sage-grouse habitat in 5 regions of central and southwest Wyoming associated with Wyoming's Core Area Policy. Wyoming's Core Area Policy was enacted in 2008 to reduce human disturbance near the greatest densities of sage-grouse. Our analyses aimed to assess sage-grouse nest selection and success at multiple micro-spatial scales. We obtained microhabitat data from 928 sage-grouse nest locations and 819 random microhabitat locations from 2008-2014. Nest success was estimated from 924 nests with survival data. Sage-grouse selected nests with greater sagebrush cover and height, visual obstruction, and number of small gaps between shrubs (gap size ≥0.5 m and sage-grouse were selecting different nest sites in Core Areas relative to areas outside of Core. The Kaplan-Meier nest success estimate for a 27-day incubation period was 42.0% (95% CI: 38.4-45.9%). Risk of nest failure was negatively associated with greater rock and more medium-sized gaps between shrubs (gap size ≥2.0 m and <3.0 m). Within our study areas, Wyoming's Core Areas did not have differing microhabitat quality compared to outside of Core Areas. The close proximity of our locations within and outside of Core Areas likely explained our lack of finding differences in microhabitat quality among locations within these landscapes. However, the Core Area Policy is most likely to conserve high quality habitat at larger spatial scales, which over decades may have cascading effects on microhabitat quality available between areas within and outside of Core Areas.

  11. Comparative analysis of the application of different Low Power Wide Area Network technologies in power grid

    Science.gov (United States)

    Wang, Hao; Sui, Hong; Liao, Xing; Li, Junhao

    2018-03-01

    Low Power Wide Area Network (LPWAN) technologies developed rapidly in recent years, but the application principle of different LPWAN technologies in power grid is still not clear. This paper gives a comparative analysis of two mainstream LPWAN technologies including NB-IoT and LoRa, and gives an application suggestion of these two LPWAN technologies, which can guide the planning and construction of LPWAN in power grid.

  12. Milestone Report:3.2.2.26 Appliances, HVAC & Water Heating R&D-Select Sorption Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ally, Moonis Raza [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-12-01

    The purpose of this report is to select a sorption technology based on recent work completed on characterizing working pairs for both absorption and adsorption technologies based on Global Warming Potential (GWP) of less than 100 (relative to carbon dioxide, 100-year atmospheric life span) and zero Ozone Depletion Potential (ODP). From a total of eighty-three potential working pairs (absorption technology), there were only two candidate working pairs for the absorption technology, and 8 potential working pairs for adsorption technology. After screening these ten potential candidates on the basis of sizes of the desorber, absorber/adsorber, evaporator, condenser, and rectifier (where applicable), the ORNL-Georgia Tech study concluded that best working pairs are NH3-H2O for the most compact system in terms of heat transfer equipment surface area, and NH3-LiNO3 and MeOH-[mmin][DMP] where efficiency is most important. Based on a single-stage absorption and adsorption modeling using the Engineering Equation Solver (EES), the performance of both sorption systems was evaluated from known heat transfer correlations, and thermos-physical properties. Based on these results, the technology chosen is absorption technology. The selected technology is absorption for the reasons cited in Section 4.

  13. Telemetry Measurement of Selected Biological Signal Using Bluetooth Technology

    Directory of Open Access Journals (Sweden)

    Martin Cerny

    2005-01-01

    Full Text Available This work treats of using the Bluetooth technology in biomedical engineering. The Bluetooth is used for transmission of measured data from pulse oximeter, ECG and monitor of blood pressure. OEM modules realize the devices for pulse oximetry and ECG. Both these realized devices can communicate with computer by Bluetooth technology and standard serial link too. The realized system of measuring devices is very flexible and mobile, because the Bluetooth technology is used and accumulators can supply the realized devices. It is possible to measure other physical values converted to voltage, because the used OEM module for pulse oximetry include A/D converter. The part of this work is software visualisation of measured values to.

  14. Selected reading on introduction to pressure tube technology

    International Nuclear Information System (INIS)

    Causey, A.R.; Coleman, C.E.; Ells, C.E.

    1981-10-01

    Four lectures on pressure tube technology were presented at Sheridan Park, Ontario, on 1981 June 1. The titles were 'Pressure Tubes and Their Operational Environment', 'Fabrication, Inspection and Properties of Current Production Pressure Tubes', 'In-Reactor Deformation of Fuel Channels', and 'Potential Failure Modes in Pressure Tubes'. This report lists the references used in preparing the lectures. It is intended to provide a starting point in reading for people who need to become familiar with pressure tube technology but have little prior knowledge of the topic

  15. Technology Used for Realization of the Reform in Informal Areas.

    Science.gov (United States)

    Qirko, K.

    2008-12-01

    ORGANIZATION OF STRUCTURE AND ADMINISTRATION OF ALUIZNI Law no. 9482, date 03.03.2006 " On legalization, urban planning and integration of unauthorized buildings", entered into force on May 15, 2006. The Council of Ministers, with its decision no.289, date 17.05.2006, established the Agency for the Legalization, Urbanization, and Integration of the Informal Zones/Buildings (ALUIZNI), with its twelve local bodies. ALUIZNI began its activity in reliance to Law no. 9482, date 03.03.2006 " On legalization, urban planning and integration of unauthorized buildings", in July 2006. The administration of this agency was completed during this period and it is composed of; General Directory and twelve regional directories. As of today, this institution has 300 employees. The administrative structure of ALUIZNI is organized to achieve the objectives of the reform and to solve the problems arising during its completion. The following sectors have been established to achieve the objectives: Sector of compensation of owners; sector of cartography, sector of geographic system data elaboration (GIS) and Information Technology; sector of urban planning; sector of registration of legalized properties and Human resource sector. Following this vision, digital air photography of the Republic of Albania is in process of realization, from which we will receive, for the first time, orthophoto and digital map, unique for the entire territory of our country. This cartographic product, will serve to all government institutions and private ones. All other systems, such as; system of territory management; system of property registration ; system of population registration; system of addresses; urban planning studies and systems; definition of boundaries of administrative and touristic zones will be established based on this cartographic system. The cartographic product will be of parameters mentioned below, divided in lots:(2.3 MEuro) 1.Lot I: It includes the urban zone, 1200 km2. It will have

  16. Energy technology monitoring - New areas and in-depth investigations; Technologie-Monitoring - Weitere Bereiche - Vertiefungen

    Energy Technology Data Exchange (ETDEWEB)

    Rigassi, R; Eicher, H [Dr. Eicher und Pauli AG, Liestal (Switzerland); Steiner, P; Ott, W [Econcept AG, Zuerich (Switzerland)

    2005-07-01

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) presents the results of a project that examined long-term trends in the energy technology area in order to provide information that is to form the basis for political action and the distribution of energy research funding in Switzerland. Energy-technology areas examined include variable-speed electrical drives, ventilation systems for low-energy-consumption buildings, membrane technology and the use of plastics in lightweight automobiles. Examples are quoted and the current state of the appropriate technologies and market aspects are examined. Also, the potential and future developments in the areas listed are looked at. The consequences for energy policy and future developments in the technology-monitoring area are considered.

  17. PECVD silicon carbide surface micromachining technology and selected MEMS applications

    NARCIS (Netherlands)

    Rajaraman, V.; Pakula, L.S.; Yang, H.; French, P.J.; Sarro, P.M.

    2011-01-01

    Attractive material properties of plasma enhanced chemical vapour deposited (PECVD) silicon carbide (SiC) when combined with CMOS-compatible low thermal budget processing provides an ideal technology platform for developing various microelectromechanical systems (MEMS) devices and merging them with

  18. Selection Processes and Appropriability in Art, Science and Technology

    NARCIS (Netherlands)

    Wijnberg, N.M.

    1995-01-01

    Recently, there has been a mutually beneficial interchange of models and ideas between the sociology of science and the economics of technological innovation. Concepts such as the "paradigm" and the "network" seem to lend themselves to useful application in both fields. To these is added the concept

  19. Use of information technology by academics in selected universities ...

    African Journals Online (AJOL)

    There was negligible use of networking and Internet. Major obstacles to effective use of information technology include lack of access to IT, inadequate skills in use of computers, and incessant power supply. The study concludes that, use of IT is a recent development in these universities, and recommends provision of ...

  20. Injection moulding and selective metallisation technologies for polymer Microsystems

    DEFF Research Database (Denmark)

    Tenchine, L.; Gout, S.; Dessors, S.

    2016-01-01

    The present paper describes how developing and optimizing high-throughput integrated technologies for theproduction of miniaturised multi-material and multi-functional components at industrial scale. Based on 2 industrialdemonstrators (a band diplexer and a micro aeraulic device), the paper shows...

  1. Selection of strategic replacement areas for CBM exploration and development in China

    Directory of Open Access Journals (Sweden)

    Longyi Shao

    2015-03-01

    Full Text Available At present, the increase in proved reserves and production of coalbed methane (CBM in China depends mainly on several CBM bases in the southern Qinshui Basin and in the eastern margin of the Ordos Basin. Therefore, it is urgent to find new batches of exploration and development strategic replacement areas. For this purpose, we investigated the resources, reservoir properties, preservation conditions, and development conditions of CBM in China, and put forward eight general factors and four critical factors that can be used in establishing selection criteria of strategic replacement areas for affecting the CBM exploration and development in China. The eight general factors are resource abundance, coalbed thickness, gas content, original permeability, burial depth, hydrogeological conditions, coalbed depositional environment, and landforms, and the four critical factors include genetic type, stability type, later reservoir reformation, and damage degree of coal structure. Comparison shows that the low-rank coal area in the northwestern area, the northeastern medium-low rank coal area, and the southwestern medium-high rank and structurally-complex coal area are the major replacement areas for CBM following the northern area of China. Key factors affecting CBM enrichment in each of the three key areas, respectively, are: a genetic type and stability of coal seams, b genetic type and reconstruction of the reservoir by volcanic intrusion, and c stability of coal seams and damage degree of coal structure. Based on these factors, a system for selection and evaluation of strategic replacement areas for CBM development was established. Fifteen blocks in the above three areas were evaluated by using multi-layered fuzzy mathematics, selecting eight favorable areas and seven relatively favorable areas that contain 1.8 trillion m3 of predicted CBM geological resources. The eight favorable areas include the Wucaiwan-Dajing coal exploration area in the Zhundong

  2. practical common weight maximin approach for technology selection

    African Journals Online (AJOL)

    2014-06-30

    Jun 30, 2014 ... proposes a multi-objective decision tool for industrial robot selection, which does not require subjective assessments ... Over the past several decades, manufacturers who have been faced with intense competition ... three groups: economic analysis techniques, analytical methods and strategic approaches.

  3. Selected Test Results from the Encell Technology Nickel Iron Battery

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Summer Kamal Rhodes [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Advanced Power Sources R& D; Baca, Wes Edmund [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Advanced Power Sources R& D; Avedikian, Kristan [Encell Technology, Alachua, FL (United States)

    2014-09-01

    The performance of the Encell Nickel Iron (NiFe) battery was measured. Tests included capacity, capacity as a function of rate, capacity as a function of temperature, charge retention (28-day), efficiency, accelerated life projection, and water refill evaluation. The goal of this work was to evaluate the general performance of the Encell NiFe battery technology for stationary applications and demonstrate the chemistry's capabilities in extreme conditions. Test results have indicated that the Encell NiFe battery technology can provide power levels up to the 6C discharge rate, ampere-hour efficiency above 70%. In summary, the Encell batteries have met performance metrics established by the manufacturer. Long-term cycle tests are not included in this report. A cycle test at elevated temperature was run, funded by the manufacturer, which Encell uses to predict long-term cycling performance, and which passed their prescribed metrics.

  4. Analysing the Effects of Flood-Resilience Technologies in Urban Areas Using a Synthetic Model Approach

    Directory of Open Access Journals (Sweden)

    Reinhard Schinke

    2016-11-01

    Full Text Available Flood protection systems with their spatial effects play an important role in managing and reducing flood risks. The planning and decision process as well as the technical implementation are well organized and often exercised. However, building-related flood-resilience technologies (FReT are often neglected due to the absence of suitable approaches to analyse and to integrate such measures in large-scale flood damage mitigation concepts. Against this backdrop, a synthetic model-approach was extended by few complementary methodical steps in order to calculate flood damage to buildings considering the effects of building-related FReT and to analyse the area-related reduction of flood risks by geo-information systems (GIS with high spatial resolution. It includes a civil engineering based investigation of characteristic properties with its building construction including a selection and combination of appropriate FReT as a basis for derivation of synthetic depth-damage functions. Depending on the real exposition and the implementation level of FReT, the functions can be used and allocated in spatial damage and risk analyses. The application of the extended approach is shown at a case study in Valencia (Spain. In this way, the overall research findings improve the integration of FReT in flood risk management. They provide also some useful information for advising of individuals at risk supporting the selection and implementation of FReT.

  5. Selecting e-Purse Smart Card Technology via Fuzzy AHP and ANP

    Directory of Open Access Journals (Sweden)

    Nurgül Demirtaş

    2014-01-01

    Full Text Available Developments in the information technologies provide important advantages to consumers and companies. Nowadays, smart card technology starts to use e-purse applications. The aim of this paper is to identify the most important decision criteria to select the best card technology. In this study, at first smart card and multiple selection techniques were explained. Then the best card technology was selected for an e-purse application. The three types of card technologies were examined and the most important criteria were taken into account by the software developer while they develop card software. Fuzzy analytic hierarchy process (FAHP and analytical network process (ANP techniques were used to compare smart card technologies.

  6. Microhabitat Conditions in Wyoming's Sage-Grouse Core Areas: Effects on Nest Site Selection and Success.

    Directory of Open Access Journals (Sweden)

    Jonathan B Dinkins

    Full Text Available The purpose of our study was to identify microhabitat characteristics of greater sage-grouse (Centrocercus urophasianus nest site selection and survival to determine the quality of sage-grouse habitat in 5 regions of central and southwest Wyoming associated with Wyoming's Core Area Policy. Wyoming's Core Area Policy was enacted in 2008 to reduce human disturbance near the greatest densities of sage-grouse. Our analyses aimed to assess sage-grouse nest selection and success at multiple micro-spatial scales. We obtained microhabitat data from 928 sage-grouse nest locations and 819 random microhabitat locations from 2008-2014. Nest success was estimated from 924 nests with survival data. Sage-grouse selected nests with greater sagebrush cover and height, visual obstruction, and number of small gaps between shrubs (gap size ≥0.5 m and <1.0 m, while selecting for less bare ground and rock. With the exception of more small gaps between shrubs, we did not find any differences in availability of these microhabitat characteristics between locations within and outside of Core Areas. In addition, we found little supporting evidence that sage-grouse were selecting different nest sites in Core Areas relative to areas outside of Core. The Kaplan-Meier nest success estimate for a 27-day incubation period was 42.0% (95% CI: 38.4-45.9%. Risk of nest failure was negatively associated with greater rock and more medium-sized gaps between shrubs (gap size ≥2.0 m and <3.0 m. Within our study areas, Wyoming's Core Areas did not have differing microhabitat quality compared to outside of Core Areas. The close proximity of our locations within and outside of Core Areas likely explained our lack of finding differences in microhabitat quality among locations within these landscapes. However, the Core Area Policy is most likely to conserve high quality habitat at larger spatial scales, which over decades may have cascading effects on microhabitat quality available

  7. Designing in seismic areas in the third millennium: modern technologies

    International Nuclear Information System (INIS)

    Martelli, Alessandro

    2015-01-01

    in areas hit by even severe earthquakes so far exhibited an excellent behavior, in spite of the fact that the violence of such earthquakes was frequently underestimated [it

  8. Landscape monitoring of post-industrial areas using LiDAR and GIS technology

    Directory of Open Access Journals (Sweden)

    Wężyk Piotr

    2015-06-01

    Full Text Available The quarrying industry is changing the local landscape, forming deep open pits and spoil heaps in close proximity to them, especially lignite mines. The impact can include toxic soil material (low pH, heavy metals, oxidations etc. which is the basis for further reclamation and afforestation. Forests that stand on spoil heaps have very different growth conditions because of the relief (slope, aspect, wind and rainfall shadows, supply of solar energy, etc. and type of soil that is deposited. Airborne laser scanning (ALS technology deliver point clouds (XYZ and derivatives as raster height models (DTM, DSM, nDSM=CHM which allow the reception of selected 2D and 3D forest parameters (e.g. height, base of the crown, cover, density, volume, biomass, etc. The automation of ALS point cloud processing and integrating the results into GIS helps forest managers to take appropriate decisions on silvicultural treatments in areas with failed plantations (toxic soil, droughts on south-facing slopes; landslides, etc. or as regular maintenance. The ISOK country-wide project ongoing in Poland will soon deliver ALS point cloud data which can be successfully used for the monitoring and management of many thousands of hectares of destroyed post-industrial areas which according to the law, have to be afforested and transferred back to the State Forest.

  9. A/M Area Groundwater Corrective Action Southern Sector Remediation Technology Alternatives Evaluation

    International Nuclear Information System (INIS)

    Looney, B.B.; Phifer, M.A.

    1994-01-01

    Several technologies for clean up of solvents such as trichloroethylene, from groundwater were examined to determine the most reasonable strategy for the southern Sector in A/M Area of Savannah River Site. The most promising options identified were: pump and treat technology, airlift recirculation technology, and bioremediation technology. These options range from baseline/traditional methods to more innovative technologies. The traditional methods would be straightforward to implement, while the innovative methods have the potential to improve efficiency and reduce long term costs

  10. Performance-Based Technology Selection Filter description report. INEL Buried Waste Integrated Demonstration System Analysis project

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

    1992-05-01

    A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

  11. Enhancing technology acceptance: The role of the subsurface contaminants focus area external integration team

    International Nuclear Information System (INIS)

    Kirwan-Taylor, H.; McCabe, G.H.; Lesperance, A.; Kauffman, J.; Serie, P.; Dressen, L.

    1996-09-01

    The US DOE is developing and deploying innovative technologies for cleaning up its contaminated facilities using a market-oriented approach. This report describes the activities of the Subsurface Contaminant Focus Area's (SCFA) External Integration Team (EIT) in supporting DOE's technology development program. The SCFA program for technology development is market-oriented, driven by the needs of end users. The purpose of EIT is to understand the technology needs of the DOE sites and identify technology acceptance criteria from users and other stakeholders to enhance deployment of innovative technologies. Stakeholders include regulators, technology users, Native Americans, and environmental and other interest groups. The success of this national program requires close coordination and communication among technology developers and stakeholders to work through all of the various phases of planning and implementation. Staff involved must be willing to commit significant amounts of time to extended discussions with the various stakeholders

  12. Fuzzy Multicriteria Model for Selection of Vibration Technology

    Directory of Open Access Journals (Sweden)

    María Carmen Carnero

    2016-01-01

    Full Text Available The benefits of applying the vibration analysis program are well known and have been so for decades. A large number of contributions have been produced discussing new diagnostic, signal treatment, technical parameter analysis, and prognosis techniques. However, to obtain the expected benefits from a vibration analysis program, it is necessary to choose the instrumentation which guarantees the best results. Despite its importance, in the literature, there are no models to assist in taking this decision. This research describes an objective model using Fuzzy Analytic Hierarchy Process (FAHP to make a choice of the most suitable technology among portable vibration analysers. The aim is to create an easy-to-use model for processing, manufacturing, services, and research organizations, to guarantee adequate decision-making in the choice of vibration analysis technology. The model described recognises that judgements are often based on ambiguous, imprecise, or inadequate information that cannot provide precise values. The model incorporates judgements from several decision-makers who are experts in the field of vibration analysis, maintenance, and electronic devices. The model has been applied to a Health Care Organization.

  13. Study on the partner selecting method of strategic alliance in high and new technology enterprises

    Institute of Scientific and Technical Information of China (English)

    王宏起; 唐宇; 迟运领

    2004-01-01

    A successful and effective strategic alliance involves many factors, of which selecting a proper partner is the most important factor to achieve the success of the alliance. In view of the characteristics of strategic alliance in high and new technology enterprises and according to the analysis on the standards of partner selecting and the factors of the success of alliance, this paper does some deeper research on the partner selecting and the alliance evaluation process from the perspective of different strategic levels by using a fuzzy comprehensive evaluating method, thus providing a method to select the alliance partner for high and new technology enterprises in China.

  14. Geothermal Reservoir Technology Research Program: Abstracts of selected research projects

    Energy Technology Data Exchange (ETDEWEB)

    Reed, M.J. (ed.)

    1993-03-01

    Research projects are described in the following areas: geothermal exploration, mapping reservoir properties and reservoir monitoring, and well testing, simulation, and predicting reservoir performance. The objectives, technical approach, and project status of each project are presented. The background, research results, and future plans for each project are discussed. The names, addresses, and telephone and telefax numbers are given for the DOE program manager and the principal investigators. (MHR)

  15. Decoding facial expressions based on face-selective and motion-sensitive areas.

    Science.gov (United States)

    Liang, Yin; Liu, Baolin; Xu, Junhai; Zhang, Gaoyan; Li, Xianglin; Wang, Peiyuan; Wang, Bin

    2017-06-01

    Humans can easily recognize others' facial expressions. Among the brain substrates that enable this ability, considerable attention has been paid to face-selective areas; in contrast, whether motion-sensitive areas, which clearly exhibit sensitivity to facial movements, are involved in facial expression recognition remained unclear. The present functional magnetic resonance imaging (fMRI) study used multi-voxel pattern analysis (MVPA) to explore facial expression decoding in both face-selective and motion-sensitive areas. In a block design experiment, participants viewed facial expressions of six basic emotions (anger, disgust, fear, joy, sadness, and surprise) in images, videos, and eyes-obscured videos. Due to the use of multiple stimulus types, the impacts of facial motion and eye-related information on facial expression decoding were also examined. It was found that motion-sensitive areas showed significant responses to emotional expressions and that dynamic expressions could be successfully decoded in both face-selective and motion-sensitive areas. Compared with static stimuli, dynamic expressions elicited consistently higher neural responses and decoding performance in all regions. A significant decrease in both activation and decoding accuracy due to the absence of eye-related information was also observed. Overall, the findings showed that emotional expressions are represented in motion-sensitive areas in addition to conventional face-selective areas, suggesting that motion-sensitive regions may also effectively contribute to facial expression recognition. The results also suggested that facial motion and eye-related information played important roles by carrying considerable expression information that could facilitate facial expression recognition. Hum Brain Mapp 38:3113-3125, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  16. Recruiting Young Volunteers in an Area of Selective Education: A Qualitative Case Study

    Science.gov (United States)

    Dean, Jon

    2016-01-01

    This article presents findings from a small qualitative case study of a youth volunteering brokerage organisation in England, operating in an area of selective state education. Data show how brokerage workers felt grammar schools managed their students in a concerted way to improve students' chances of attending university. Conversely, workers…

  17. Deep far infrared ISOPHOT survey in "Selected Area 57" - I. Observations and source counts

    DEFF Research Database (Denmark)

    Linden-Vornle, M.J.D.; Nørgaard-Nielsen, Hans Ulrik; Jørgensen, H.E.

    2000-01-01

    We present here the results of a deep survey in a 0.4 deg(2) blank field in Selected Area 57 conducted with the ISOPHOT instrument aboard ESAs Infrared Space Observatory (ISO1) at both 60 mu m and 90 mu m. The resulting sky maps have a spatial resolution of 15 x 23 arcsrc(2) per pixel which is much...

  18. Area-selective atomic layer deposition of platinum using photosensitive polyimide

    NARCIS (Netherlands)

    Vervuurt, R.H.J.; Sharma, A.; Jiao, Y.; Kessels, W.M.M.; Bol, A.A.

    2016-01-01

    Area-selective atomic layer deposition (AS-ALD) of platinum (Pt) was studied using photosensitive polyimide as a masking layer. The polyimide films were prepared by spin-coating and patterned using photolithography. AS-ALD of Pt using poly(methyl-methacrylate) (PMMA) masking layers was used as a

  19. Body-selective areas in the visual cortex are less active in children than in adults

    NARCIS (Netherlands)

    Ross, Paddy D.; de Gelder, Beatrice; Crabbe, Frances; Grosbras, Marie-Helene

    2014-01-01

    Our ability to read other people's non-verbal signals gets refined throughout childhood and adolescence. How this is paralleled by brain development has been investigated mainly with regards to face perception, showing a protracted functional development of the face-selective visual cortical areas.

  20. Mixed waste focus area Department of Energy technology development needs identification and prioritization

    International Nuclear Information System (INIS)

    Roach, J.A.

    1995-11-01

    The Assistant Secretary for the Office of Environmental Management (EM) at the US DOE initiated a new approach in August, 1993 to environmental research and technology development. The key features of this new approach included establishment of five focus areas and three crosscutting technology programs, which overlap the boundaries of the focus areas. The five focus areas include the Contaminant Plumes Containment and Remediation; Mixed Waste Characterization, Treatment, and Disposal; High-Level Waste Tank Remediation, Landfill Stabilization, and Decontamination and Decommissioning Focus Areas. The three crosscutting technologies programs include Characterization, Monitoring, and Sensor Technology; Efficient Separations and Processing; and Robotics. The DOE created the Mixed Waste Characterization, Treatment, and Disposal Focus Area (MWFA) to develop and facilitate implementation of technologies required to meet its commitments for treatment of mixed wastes. To accomplish this goal, the technology deficiencies must be identified and categorized, the deficiencies and needs must be prioritized, and a technical baseline must be established that integrates the requirements associated with these needs into the planned and ongoing environmental research and technology development activities supported by the MWFA. These steps are described

  1. Defense Technology Objectives for the Joint Warfighting Science and Technology Plan and the Defense Technology Area Plan

    National Research Council Canada - National Science Library

    1998-01-01

    .... Technologies such as radar, jet engines, nuclear weapons, night vision, smart weapons, stealth, the Global Positioning System, and vastly more capable information management systems have changed warfare dramatically...

  2. Decision analysis for the selection of tank waste retrieval technology

    International Nuclear Information System (INIS)

    DAVIS, FREDDIE J.; DEWEESE, GREGORY C.; PICKETT, WILLIAM W.

    2000-01-01

    The objective of this report is to supplement the C-104 Alternatives Generation and Analysis (AGA) by providing a decision analysis for the alternative technologies described therein. The decision analysis used the Multi-Attribute Utility Analysis (MUA) technique. To the extent possible information will come from the AGA. Where data are not available, elicitation of expert opinion or engineering judgment is used and reviewed by the authors of the AGA. A key element of this particular analysis is the consideration of varying perspectives of parties interested in or affected by the decision. The six alternatives discussed are: sluicing; sluicing with vehicle mounted transfer pump; borehole mining; vehicle with attached sluicing nozzle and pump; articulated arm with attached sluicing nozzle; and mechanical dry retrieval. These are evaluated using four attributes, namely: schedule, cost, environmental impact, and safety

  3. Coping with Atmospheric Turbulence in the Selection of Laser Hardening Technology for FCS Targeting Systems

    National Research Council Canada - National Science Library

    Pritchett, Timothy M

    2004-01-01

    ... by frequency-agile battlefield lasers at both long and short range. Evidently, the selection of sensor protection technologies for incorporation into the final targeting system will be based on their optical limiting performance under field conditions...

  4. [Evaluation and selection of VOCs treatment technologies in packaging and printing industry].

    Science.gov (United States)

    Wang, Hai-Lin; Wang, Jun-Hui; Zhu, Chun-Lei; Nie, Lei; Hao, Zheng-Ping

    2014-07-01

    Volatile organic compounds (VOCs) play an important role in urban air pollution. Activities of industries including the packaging and printing industries are regarded as the major sources. How to select the suitable treating techniques is the major problem for emission control. In this article, based on the VOCs emission characteristics of the packaging and printing industry and the existing treatment technologies, using the analytic hierarchy process (AHP) model, an evaluation system for VOCs selection was established and all the technologies used for treatment were assessed. It showed that the priority selection was in the following order: Carbon Fiber Adsorption-Desorption > Granular Carbon Adsorption-Desorption > Thermal Combustion > Regenerative Combustion > Catalytic combustion > Rotary adsorption-concentration and combustion > Granular Carbon adsorption-concentration and combustion. Carbon Fiber Adsorption-Desorption was selected as the best available technology due to its highest weight among those technologies.

  5. Analysis of Land Subsidence Monitoring in Mining Area with Time-Series Insar Technology

    Science.gov (United States)

    Sun, N.; Wang, Y. J.

    2018-04-01

    Time-series InSAR technology has become a popular land subsidence monitoring method in recent years, because of its advantages such as high accuracy, wide area, low expenditure, intensive monitoring points and free from accessibility restrictions. In this paper, we applied two kinds of satellite data, ALOS PALSAR and RADARSAT-2, to get the subsidence monitoring results of the study area in two time periods by time-series InSAR technology. By analyzing the deformation range, rate and amount, the time-series analysis of land subsidence in mining area was realized. The results show that InSAR technology could be used to monitor land subsidence in large area and meet the demand of subsidence monitoring in mining area.

  6. Automated training site selection for large-area remote-sensing image analysis

    Science.gov (United States)

    McCaffrey, Thomas M.; Franklin, Steven E.

    1993-11-01

    A computer program is presented to select training sites automatically from remotely sensed digital imagery. The basic ideas are to guide the image analyst through the process of selecting typical and representative areas for large-area image classifications by minimizing bias, and to provide an initial list of potential classes for which training sites are required to develop a classification scheme or to verify classification accuracy. Reducing subjectivity in training site selection is achieved by using a purely statistical selection of homogeneous sites which then can be compared to field knowledge, aerial photography, or other remote-sensing imagery and ancillary data to arrive at a final selection of sites to be used to train the classification decision rules. The selection of the homogeneous sites uses simple tests based on the coefficient of variance, the F-statistic, and the Student's i-statistic. Comparisons of site means are conducted with a linear growing list of previously located homogeneous pixels. The program supports a common pixel-interleaved digital image format and has been tested on aerial and satellite optical imagery. The program is coded efficiently in the C programming language and was developed under AIX-Unix on an IBM RISC 6000 24-bit color workstation.

  7. Discussion on Sustainable Water Technologies for Peri-Urban Areas of Mexico City: Balancing Urbanization and Environmental Conservation

    Directory of Open Access Journals (Sweden)

    Laura Essl

    2012-09-01

    Full Text Available Often centralized water supply, sanitation and solid waste services struggle to keep up with the rapid expansion of urban areas. The peri-urban areas are at the forefront of this expansion and it is here where decentralized technologies are increasingly being implemented. The introduction of decentralized technologies allows for the development of new opportunities that enable the recovery and reuse of resources in the form of water, nutrients and energy. This resource-oriented management of water, nutrients and energy requires a sustainable system aimed at low resource use and high recovery and reuse rates. Instead of investigating each sector separately, as has been traditionally done, this article proposes and discusses a concept that seeks to combine the in- and outflows of the different sectors, reusing water and other liberated resources where possible. This paper shows and demonstrates examples of different types of sustainable technologies that can be implemented in the peri-urban areas of Mexico City [rainwater harvesting, EcoSan and biofiltros (small constructed wetlands, and (vermi-composting]. An innovative participatory planning method, combining scenario development with a participatory planning workshop with key stakeholders, was applied and resulted in three concept scenarios. Specific technologies were then selected for each concept scenario that the technical feasibility and applicability was assessed. Following this, the resulting resource flows (nutrients, water and energy were determined and analyzed. The results show that decentralized technologies not only have the potential to deliver adequate water supply, sanitation and solid waste services in peri-urban areas and lessen environmental pollution, but also can recover significant amounts of resources thereby saving costs and providing valuable inputs in, for instance, the agricultural sector. Social acceptance of the technologies and institutional cooperation, however, is

  8. Discussion on Sustainable Water Technologies for Peri-Urban Areas of Mexico City: Balancing Urbanization and Environmental Conservation

    Directory of Open Access Journals (Sweden)

    Tiemen A. Nanninga

    2012-09-01

    Full Text Available Often centralized water supply, sanitation and solid waste services struggle to keep up with the rapid expansion of urban areas. The peri-urban areas are at the forefront of this expansion and it is here where decentralized technologies are increasingly being implemented. The introduction of decentralized technologies allows for the development of new opportunities that enable the recovery and reuse of resources in the form of water, nutrients and energy. This resource-oriented management of water, nutrients and energy requires a sustainable system aimed at low resource use and high recovery and reuse rates. Instead of investigating each sector separately, as has been traditionally done, this article proposes and discusses a concept that seeks to combine the in- and outflows of the different sectors, reusing water and other liberated resources where possible. This paper shows and demonstrates examples of different types of sustainable technologies that can be implemented in the peri-urban areas of Mexico City [rainwater harvesting, EcoSan and biofiltros (small constructed wetlands, and (vermi-composting]. An innovative participatory planning method, combining scenario development with a participatory planning workshop with key stakeholders, was applied and resulted in three concept scenarios. Specific technologies were then selected for each concept scenario that the technical feasibility and applicability was assessed. Following this, the resulting resource flows (nutrients, water and energy were determined and analyzed. The results show that decentralized technologies not only have the potential to deliver adequate water supply, sanitation and solid waste services in peri-urban areas and lessen environmental pollution, but also can recover significant amounts of resources thereby saving costs and providing valuable inputs in, for instance, the agricultural sector. Social acceptance of the technologies and institutional cooperation

  9. A Technology Selection Framework for Integrating Manufacturing within a Supply Chain

    DEFF Research Database (Denmark)

    Farooq, Sami; O' Brien, Chris

    2012-01-01

    This paper describes a structured analytical approach for selecting a manufacturing technology. A framework consisting of six integrated steps is proposed by considering the growing importance of supply chains in manufacturing organisations. The framework makes use of Analytical Hierarchy (AHP......) approach combined with Strategic Assessment Model (SAM) to evaluate and select the technologies appropriate for providing overall competitive advantage. The framework is intended to assist industrial managers in promoting manufacturing and supply chain collaboration and coordination by including intra...

  10. Research of Ancient Architectures in Jin-Fen Area Based on GIS&BIM Technology

    Science.gov (United States)

    Jia, Jing; Zheng, Qiuhong; Gao, Huiying; Sun, Hai

    2017-05-01

    The number of well-preserved ancient buildings located in Shanxi Province, enjoying the absolute maximum proportion of ancient architectures in China, is about 18418, among which, 9053 buildings have the structural style of wood frame. The value of the application of BIM (Building Information Modeling) and GIS (Geographic Information System) is gradually probed and testified in the corresponding fields of ancient architecture’s spatial distribution information management, routine maintenance and special conservation & restoration, the evaluation and simulation of related disasters, such as earthquake. The research objects are ancient architectures in JIN-FEN area, which were first investigated by Sicheng LIANG and recorded in his work of “Chinese ancient architectures survey report”. The research objects, i.e. the ancient architectures in Jin-Fen area include those in Sicheng LIANG’s investigation, and further adjustments were made through authors’ on-site investigation and literature searching & collection. During this research process, the spatial distributing Geodatabase of research objects is established utilizing GIS. The BIM components library for ancient buildings is formed combining on-site investigation data and precedent classic works, such as “Yingzao Fashi”, a treatise on architectural methods in Song Dynasty, “Yongle Encyclopedia” and “Gongcheng Zuofa Zeli”, case collections of engineering practice, by the Ministry of Construction of Qing Dynasty. A building of Guangsheng temple in Hongtong county is selected as an example to elaborate the BIM model construction process based on the BIM components library for ancient buildings. Based on the foregoing work results of spatial distribution data, attribute data of features, 3D graphic information and parametric building information model, the information management system for ancient architectures in Jin-Fen Area, utilizing GIS&BIM technology, could be constructed to support the

  11. Research of Ancient Architectures in Jin-Fen Area Based on GIS and BIM Technology

    International Nuclear Information System (INIS)

    Jia, Jing; Zheng, Qiuhong; Gao, Huiying; Sun, Hai

    2017-01-01

    The number of well-preserved ancient buildings located in Shanxi Province, enjoying the absolute maximum proportion of ancient architectures in China, is about 18418, among which, 9053 buildings have the structural style of wood frame. The value of the application of BIM (Building Information Modeling) and GIS (Geographic Information System) is gradually probed and testified in the corresponding fields of ancient architecture’s spatial distribution information management, routine maintenance and special conservation and restoration, the evaluation and simulation of related disasters, such as earthquake. The research objects are ancient architectures in JIN-FEN area, which were first investigated by Sicheng LIANG and recorded in his work of “Chinese ancient architectures survey report”. The research objects, i.e. the ancient architectures in Jin-Fen area include those in Sicheng LIANG’s investigation, and further adjustments were made through authors’ on-site investigation and literature searching and collection. During this research process, the spatial distributing Geodatabase of research objects is established utilizing GIS. The BIM components library for ancient buildings is formed combining on-site investigation data and precedent classic works, such as “Yingzao Fashi”, a treatise on architectural methods in Song Dynasty, “Yongle Encyclopedia” and “Gongcheng Zuofa Zeli”, case collections of engineering practice, by the Ministry of Construction of Qing Dynasty. A building of Guangsheng temple in Hongtong county is selected as an example to elaborate the BIM model construction process based on the BIM components library for ancient buildings. Based on the foregoing work results of spatial distribution data, attribute data of features, 3D graphic information and parametric building information model, the information management system for ancient architectures in Jin-Fen Area, utilizing GIS and BIM technology, could be constructed to support

  12. Enhanced Sampling and Analysis, Selection of Technology for Testing

    Energy Technology Data Exchange (ETDEWEB)

    Svoboda, John; Meikrantz, David

    2010-02-01

    The focus of this study includes the investigation of sampling technologies used in industry and their potential application to nuclear fuel processing. The goal is to identify innovative sampling methods using state of the art techniques that could evolve into the next generation sampling and analysis system for metallic elements. This report details the progress made in the first half of FY 2010 and includes a further consideration of the research focus and goals for this year. Our sampling options and focus for the next generation sampling method are presented along with the criteria used for choosing our path forward. We have decided to pursue the option of evaluating the feasibility of microcapillary based chips to remotely collect, transfer, track and supply microliters of sample solutions to analytical equipment in support of aqueous processes for used nuclear fuel cycles. Microchip vendors have been screened and a choice made for the development of a suitable microchip design followed by production of samples for evaluation by ANL, LANL, and INL on an independent basis.

  13. Technology selection for hydrogen production using nuclear energy

    International Nuclear Information System (INIS)

    Siti Alimah; Erlan Dewita

    2008-01-01

    The NPP can either be used to produce electricity, or as heat source for non-electric applications (cogeneration). High Temperature Reactor (HTR) with high outlet coolant temperature around 900~1000 o C, is a reactor type potential for cogeneration purposes such as hydrogen production and other chemical industry processes that need high heat. Considering the national energy policy that a balanced arrangement of renewable and unrenewable natural resources has to be made to keep environmental conservation for the sake of society prosperity in the future, hydrogen gas production using nuclear heat is an appropriate choice. Hydrogen gas is a new energy which is environmentally friendly that it is a prospecting alternative energy source in the future. Within the study, a comparison of three processes of hydrogen gas production covering electrolysis, steam reforming and sulfur-iodine cycle, have been conducted. The parameters that considered are the production cost, capital cost and energy cost, technological status, the independence of fossil fuel, the environmental friendly aspect, as well as the efficiency and the independence of corrosion-resistance material. The study result showed that hydrogen gas production by steam reforming is a better process compared to electrolysis and sulfur-iodine process. Therefore, steam reforming process can be a good choice for hydrogen gas production using nuclear energy in Indonesia. (author)

  14. CO2 Selective Potentiometric Sensor in Thick-film Technology

    Directory of Open Access Journals (Sweden)

    Ralf Moos

    2008-08-01

    Full Text Available A potentiometric sensor device based on screen-printed Nasicon films was investigated. In order to transfer the promising sensor concept of an open sodium titanate reference to thick film technology, “sodium-rich” and “sodium-poor” formulations were compared. While the “sodium-rich” composition was found to react with the ion conducting Nasicon during thermal treatment, the “sodium-poor” reference mixture was identified as an appropriate reference composition. Screen-printed sensor devices were prepared and tested with respect to CO2 response, reproducibility, and cross-interference of oxygen. Excellent agreement with the theory was observed. With the integration of a screen-printed heater, sensor elements were operated actively heated in a cold gas stream.

  15. Software Technologies - 8th International Joint Conference, ICSOFT 2013 : Revised Selected Papers

    NARCIS (Netherlands)

    Cordeiro, José; van Sinderen, Marten J.

    2014-01-01

    The present book includes extended and revised versions of a set of selected papers from the 8th International Joint Conference on Software Technologies (ICSOFT 2013), which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information,

  16. Secondary Mathematics Pre-Service Teachers' Processes of Selection and Integration of Technology

    Science.gov (United States)

    Uzan, Erol

    2017-01-01

    This study investigated secondary mathematics pre-service teachers' (PSTs) knowledge of resources in terms of digital technologies, and explored the processes of both selection and integration of technology into their lesson plans. This study employed a case study design. Participants were six secondary mathematics PSTs who enrolled in a methods…

  17. Exploring the Use of Information Communication Technologies by Selected Caribbean Extension Officers

    Science.gov (United States)

    Strong, Robert; Ganpat, Wayne; Harder, Amy; Irby, Travis L.; Lindner, James R.

    2014-01-01

    Purpose: The purpose of this study was to describe selected Caribbean extension officers' technology preferences and examine factors that may affect their technology preferences. Design/methodology/approach: The sample consisted of extension officers (N = 119) participating in professional development training sessions in Grenada, Belize and Saint…

  18. Assessment of Gari Processing Technologies in Oja-Iya Area of ...

    African Journals Online (AJOL)

    This study was conducted to assess gari processing technologies in Oja-Iya Area of Ilorin West local government area of Kwara State, Nigeria. Data were collected through questionnaire and observation methods. Highest percentages of gari processors procure their raw materials from farmers and market places.

  19. MULTI-FACTOR ANALYSIS FOR SELECTING LUNAR EXPLORATION SOFT LANDING AREA AND THE BEST CRUISE ROUTE

    Directory of Open Access Journals (Sweden)

    N. Mou

    2018-04-01

    Full Text Available Selecting the right soft landing area and planning a reasonable cruise route are the basic tasks of lunar exploration. In this paper, the Von Karman crater in the Antarctic Aitken basin on the back of the moon is used as the study area, and multi-factor analysis is used to evaluate the landing area and cruise route of lunar exploration. The evaluation system mainly includes the factors such as the density of craters, the impact area of craters, the formation of the whole area and the formation of some areas, such as the vertical structure, rock properties and the content of (FeO + TiO2, which can reflect the significance of scientific exploration factor. And the evaluation of scientific exploration is carried out on the basis of safety and feasibility. On the basis of multi-factor superposition analysis, three landing zones A, B and C are selected, and the appropriate cruising route is analyzed through scientific research factors. This study provides a scientific basis for the lunar probe landing and cruise route planning, and it provides technical support for the subsequent lunar exploration.

  20. Multi-Factor Analysis for Selecting Lunar Exploration Soft Landing Area and the best Cruise Route

    Science.gov (United States)

    Mou, N.; Li, J.; Meng, Z.; Zhang, L.; Liu, W.

    2018-04-01

    Selecting the right soft landing area and planning a reasonable cruise route are the basic tasks of lunar exploration. In this paper, the Von Karman crater in the Antarctic Aitken basin on the back of the moon is used as the study area, and multi-factor analysis is used to evaluate the landing area and cruise route of lunar exploration. The evaluation system mainly includes the factors such as the density of craters, the impact area of craters, the formation of the whole area and the formation of some areas, such as the vertical structure, rock properties and the content of (FeO + TiO2), which can reflect the significance of scientific exploration factor. And the evaluation of scientific exploration is carried out on the basis of safety and feasibility. On the basis of multi-factor superposition analysis, three landing zones A, B and C are selected, and the appropriate cruising route is analyzed through scientific research factors. This study provides a scientific basis for the lunar probe landing and cruise route planning, and it provides technical support for the subsequent lunar exploration.

  1. Evaluation of new energy technologies and the selection in Japan

    International Nuclear Information System (INIS)

    Oshima, Keiichi

    1977-01-01

    Since the oil shock in 1973, advanced countries pondered over the countermeasures regarding security, the circulation of foreign currency accumulating in oil-producing countries, and the lowering of the dependence on petroleum. Moreover, the problem of primary products, the aid to development, finance and debt were discussed with developing countries. The problem of energy is not that of short term, but the structural weakness and the contradiction of the energy problem were exposed in the form of the oil crisis. As for the general outlook during 10 years from now, the development of atomic energy slows down, the import of oil expands largely, and the production of coal is small, thus the prospect of using substitute energy is not so optimistic as before. The developments of breeder reactors, the utilization of solar energy and geothermal energy, and the technical development of using coal are discussed especially as the problems in Japan. Regarding environmental pollution, coal is highly problematic, and atomic energy is clean next to LNG. The dependence of atomic energy on foreign countries is low in view of the investment in foreign countries. As the selection feasible for Japan to fill the gap of energy demand and supply from 1985 to 2000, coal or atomic energy is to be used. The use of atomic energy in Japan is important for worldwide economy. (Kako, I.)

  2. Selective-area vapour-liquid-solid growth of InP nanowires

    International Nuclear Information System (INIS)

    Dalacu, Dan; Kam, Alicia; Guy Austing, D; Wu Xiaohua; Lapointe, Jean; Aers, Geof C; Poole, Philip J

    2009-01-01

    A comparison is made between the conventional non-selective vapour-liquid-solid growth of InP nanowires and a novel selective-area growth process where the Au-seeded InP nanowires grow exclusively in the openings of a SiO 2 mask on an InP substrate. This new process allows the precise positioning and diameter control of the nanowires required for future advanced device fabrication. The growth temperature range is found to be extended for the selective-area growth technique due to removal of the competition between material incorporation at the Au/nanowire interface and the substrate. A model describing the growth mechanism is presented which successfully accounts for the nanoparticle size-dependent and time-dependent growth rate. The dominant indium collection process is found to be the scattering of the group III source material from the SiO 2 mask and subsequent capture by the nanowire, a process that had previously been ignored for selective-area growth by chemical beam epitaxy.

  3. Selective-area vapour-liquid-solid growth of InP nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Dalacu, Dan; Kam, Alicia; Guy Austing, D; Wu Xiaohua; Lapointe, Jean; Aers, Geof C; Poole, Philip J, E-mail: dan.dalacu@nrc-cnrc.gc.c [Institute for Microstructural Sciences, National Research Council of Canada, Ottawa, K1A 0R6 (Canada)

    2009-09-30

    A comparison is made between the conventional non-selective vapour-liquid-solid growth of InP nanowires and a novel selective-area growth process where the Au-seeded InP nanowires grow exclusively in the openings of a SiO{sub 2} mask on an InP substrate. This new process allows the precise positioning and diameter control of the nanowires required for future advanced device fabrication. The growth temperature range is found to be extended for the selective-area growth technique due to removal of the competition between material incorporation at the Au/nanowire interface and the substrate. A model describing the growth mechanism is presented which successfully accounts for the nanoparticle size-dependent and time-dependent growth rate. The dominant indium collection process is found to be the scattering of the group III source material from the SiO{sub 2} mask and subsequent capture by the nanowire, a process that had previously been ignored for selective-area growth by chemical beam epitaxy.

  4. [Brazilian technological output in the area of nursing: advances and challenges].

    Science.gov (United States)

    Koerich, Micheline Henrique Araujo da Luz; Vieira, Raquel Heloisa Guedes; Silva, Daniela Eda; Erdmann, Alacoque Lorenzini; Meirelles, Betina Horner Shlindwein

    2011-12-01

    This article aims to analyze the patents registered in the nursing area, since these patents may be used as an indicator of the technological development in the area. It presents and discusses national technological productions, tracked through the "nursing" keyword, patented in the period from 1990-2009. This is a retrospective documental research, using, as a source, data from the National Industrial Property Institute (INPI). The information gathered is discussed in relation to the appropriation of the technologies, the incentive to develop them and register them as a source of knowledge in the nursing field, aiming the practice of care. Light and light hard technology productions are increasing in the nursing field. However, these are not registered and patented. The technological advance in the nursing field is emergent and needs policies for its development.

  5. Habitat selection by female northern pintails wintering in the Grassland Ecological Area, California

    Science.gov (United States)

    Fleskes, Joseph P.; Gilmer, David S.; Jarvis, Robert L.

    2004-01-01

    To determine relative importance of habitats available in the Grassland Ecological Area (GEA) to wintering female northern pintails, Anas acuta, we studied habitat use relative to availability (i.e., habitat selection) in the GEA during September through March, 1991-94 for 196 Hatch-Year (HY) and 221 After-Hatch-Year (AHY) female pintails that were radio tagged during August-early October in the GEA (n = 239), other San Joaquin Valley areas (n = 132), or other Central Valley areas (n = 46). Habitat availability and use varied among seasons and years, but pintails always selected shallow and, except on hunting days, open habitats. Swamp timothy, Heleochloa schoenoides, marsh was the most available, used, and selected habitat. Watergrass, Echinochloa crusgalli, marsh in the GEA was used less than available at night in contrast to previous studies in other SJV areas. Preferred late-winter habitats were apparently lacking in the GEA, at least relative to in the Sacramento Valley and Delta where most pintails moved to in December each year. Impacts on pintails of the increasing practice of managing marshes for increased emergent vegetation to attract other species should be monitored. Shallow, open habitats that produce seeds and invertebrates available to pintails in late winter would help maintain pintail abundance in the GEA.

  6. Common Starlings (Sturnus vulgaris) increasingly select for grazed areas with increasing distance-to-nest.

    Science.gov (United States)

    Heldbjerg, Henning; Fox, Anthony D; Thellesen, Peder V; Dalby, Lars; Sunde, Peter

    2017-01-01

    The abundant and widespread Common Starling (Sturnus vulgaris) is currently declining across much of Europe due to landscape changes caused by agricultural intensification. The proximate mechanisms causing adverse effects to breeding Starlings are unclear, hampering our ability to implement cost-efficient agri-environmental schemes to restore populations to former levels. This study aimed to show how this central foraging farmland bird uses and selects land cover types in general and how use of foraging habitat changes in relation to distance from the nest. We attached GPS-loggers to 17 breeding Starlings at a Danish dairy cattle farm in 2015 and 2016 and analysed their use of different land cover types as a function of distance intervals from the nest and their relative availability. As expected for a central place forager, Starlings increasingly avoided potential foraging areas with greater distance-to-nest: areas ≥ 500 m were selected > 100 times less frequently than areas within 100 m. On average, Starlings selected the land cover category Grazed most frequently, followed by Short Grass, Bare Ground, Meadow and Winter Crops. Starlings compensated for elevated travel costs by showing increasing habitat selection the further they foraged from the nest. Our results highlight the importance of Grazed foraging habitats close to the nest site of breeding Starlings. The ecological capacity of intensively managed farmlands for insectivorous birds like the Starling is decreasing through conversion of the most strongly selected land cover type (Grazed) to the least selected (Winter Crops) which may be further exacerbated through spatial segregation of foraging and breeding habitats.

  7. Common Starlings (Sturnus vulgaris increasingly select for grazed areas with increasing distance-to-nest.

    Directory of Open Access Journals (Sweden)

    Henning Heldbjerg

    Full Text Available The abundant and widespread Common Starling (Sturnus vulgaris is currently declining across much of Europe due to landscape changes caused by agricultural intensification. The proximate mechanisms causing adverse effects to breeding Starlings are unclear, hampering our ability to implement cost-efficient agri-environmental schemes to restore populations to former levels. This study aimed to show how this central foraging farmland bird uses and selects land cover types in general and how use of foraging habitat changes in relation to distance from the nest. We attached GPS-loggers to 17 breeding Starlings at a Danish dairy cattle farm in 2015 and 2016 and analysed their use of different land cover types as a function of distance intervals from the nest and their relative availability. As expected for a central place forager, Starlings increasingly avoided potential foraging areas with greater distance-to-nest: areas ≥ 500 m were selected > 100 times less frequently than areas within 100 m. On average, Starlings selected the land cover category Grazed most frequently, followed by Short Grass, Bare Ground, Meadow and Winter Crops. Starlings compensated for elevated travel costs by showing increasing habitat selection the further they foraged from the nest. Our results highlight the importance of Grazed foraging habitats close to the nest site of breeding Starlings. The ecological capacity of intensively managed farmlands for insectivorous birds like the Starling is decreasing through conversion of the most strongly selected land cover type (Grazed to the least selected (Winter Crops which may be further exacerbated through spatial segregation of foraging and breeding habitats.

  8. Selective Mobile Communication within a Coverage Area Bounded by Radiating Cables

    Directory of Open Access Journals (Sweden)

    Hatim Behairy

    2015-01-01

    Full Text Available It is often desirable to control mobile phone services in areas where complete silence is either expected or mandatory, including schools, places of worship, hospitals, and prisons. In contrast to conventional techniques, such as jammers or Faraday cages, we present a novel technique to selectively control mobile phone services within a desired area. Our solution enables the area’s keeper to allow mobile phones on a whitelist to freely use mobile services without disruption while denying services to all other mobile phones that are within the boundaries of the desired area to be controlled. Our solution uses a base station controller to identify all mobile devices located within the area to be controlled, while an antenna is placed inside the area to attract all mobile devices in the area to connect to the base station controller. In previous work, we proposed a system that uses directional antennas for the attraction technique. In this work, we show that replacement of the directional antennas with a leaky feeder antenna enables more accurate control of mobile phone services in and around the area to be controlled. Simulations and experiments of the leaky feeder technique confirm its precise control of mobile phone services within the desired areas.

  9. Technology strategy for cost-effective drilling and intervention; Technology Target Areas; TTA4 - Cost effective drilling and intervention

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    The main goals of the OG21 initiative are to (1) develop new technology and knowledge to increase the value creation of Norwegian oil and gas resources and (2) enhance the export of Norwegian oil and gas technology. The OG21 Cost-effective Drilling and Intervention (CEDI) Technology Target Area (TTA) has identified some key strategic drilling and well intervention needs to help meet the goals of OG21. These key strategic drilling and well intervention needs are based on a review of present and anticipated future offshore-Norway drilling and well intervention conditions and the Norwegian drilling and well intervention industry. A gap analysis has been performed to assess the extent to which current drilling and well intervention research and development and other activities will meet the key strategic needs. Based on the identified strategic drilling and well intervention needs and the current industry res each and development and other activities, the most important technology areas for meeting the OG21 goals are: environment-friendly and low-cost exploration wells; low-cost methods for well intervention/sidetracks; faster and extended-reach drilling; deep water drilling, completion and intervention; offshore automated drilling; subsea and sub-ice drilling; drilling through basalt and tight carbonates; drilling and completion in salt formation. More specific goals for each area: reduce cost of exploration wells by 50%; reduce cost for well intervention/sidetracks by 50%; increase drilling efficiency by 40%; reduce drilling cost in deep water by 40 %; enable offshore automated drilling before 2012; enable automated drilling from seabed in 2020. Particular focus should be placed on developing new technology for low-cost exploration wells to stem the downward trends in the number of exploration wells drilled and the volume of discovered resources. The CEDI TTA has the following additional recommendations: The perceived gaps in addressing the key strategic drilling and

  10. Selection and evaluation of technologies for oil rim preparation of Zapolyarnoye oilfield

    Science.gov (United States)

    Vazhenina, L. V.

    2017-10-01

    The article deals with various technologies for the oil rims preparation of Zapolyarnoye oil and gas condensate field. The following circuits were considered for the selection of the technology of preparation of extracted fluid: low-temperature separation (STC); low-temperature condensation (LTC); a low-temperature rectification (NTR); low-temperature absorption (LTA); membrane technology (Mt). Diagrams of these processes were collected and tested in the system HYSYS process simulation. Efficiency analysis of hydrocarbon raw materials preparation on the basis of functions, selection of components and narrow fractions.

  11. Effect of feature-selective attention on neuronal responses in macaque area MT

    Science.gov (United States)

    Chen, X.; Hoffmann, K.-P.; Albright, T. D.

    2012-01-01

    Attention influences visual processing in striate and extrastriate cortex, which has been extensively studied for spatial-, object-, and feature-based attention. Most studies exploring neural signatures of feature-based attention have trained animals to attend to an object identified by a certain feature and ignore objects/displays identified by a different feature. Little is known about the effects of feature-selective attention, where subjects attend to one stimulus feature domain (e.g., color) of an object while features from different domains (e.g., direction of motion) of the same object are ignored. To study this type of feature-selective attention in area MT in the middle temporal sulcus, we trained macaque monkeys to either attend to and report the direction of motion of a moving sine wave grating (a feature for which MT neurons display strong selectivity) or attend to and report its color (a feature for which MT neurons have very limited selectivity). We hypothesized that neurons would upregulate their firing rate during attend-direction conditions compared with attend-color conditions. We found that feature-selective attention significantly affected 22% of MT neurons. Contrary to our hypothesis, these neurons did not necessarily increase firing rate when animals attended to direction of motion but fell into one of two classes. In one class, attention to color increased the gain of stimulus-induced responses compared with attend-direction conditions. The other class displayed the opposite effects. Feature-selective activity modulations occurred earlier in neurons modulated by attention to color compared with neurons modulated by attention to motion direction. Thus feature-selective attention influences neuronal processing in macaque area MT but often exhibited a mismatch between the preferred stimulus dimension (direction of motion) and the preferred attention dimension (attention to color). PMID:22170961

  12. A multispectral scanner survey of the Rocky Flats Environmental Technology Site and surrounding area, Golden, Colorado

    International Nuclear Information System (INIS)

    Brewster, S.B. Jr.; Brickey, D.W.; Ross, S.L.; Shines, J.E.

    1997-04-01

    Aerial multispectral scanner imagery was collected of the Rocky Flats Environmental Technology Site in Golden, Colorado, on June 3, 5, 6, and 7, 1994, using a Daedalus AADS1268 multispectral scanner and coincident aerial color and color infrared photography. Flight altitudes were 4,500 feet (1372 meters) above ground level to match prior 1989 survey data; 2,000 feet (609 meters) above ground level for sitewide vegetation mapping; and 1,000 feet (304 meters) above ground level for selected areas of special interest. A multispectral survey was initiated to improve the existing vegetation classification map, to identify seeps and springs, and to generate ARC/INFO Geographic Information System compatible coverages of the vegetation and wetlands for the entire site including the buffer zone. The multispectral scanner imagery and coincident aerial photography were analyzed for the detection, identification, and mapping of vegetation and wetlands. The multispectral scanner data were processed digitally while the color and color infrared photography were manually photo-interpreted to define vegetation and wetlands. Several standard image enhancement techniques were applied to the multispectral scanner data to assist image interpretation. A seep enhancement was applied and a color composite consisting of multispectral scanner channels 11, 7, and 5 (thermal infrared, mid-infrared, and red bands, respectively) proved most useful for detecting seeps, seep zones, and springs. The predawn thermal infrared data were also useful in identifying and locating seeps. The remote sensing data, mapped wetlands, and ancillary Geographic Information System compatible data sets were spatially analyzed for seeps

  13. Potential site selection for radioactive waste repository using GIS (Study area: Negeri Sembilan) - Phase 1

    International Nuclear Information System (INIS)

    Ahmad Hasnulhadi Che Kamaruddin; Faizal Azrin Abdul Razalim; Mohd Abdul Wahab Yusof; Nik Marzukee Nik Ibrahim; Nazran Harun; Muhammad Fathi Sujan; Karuppiah, T.; Surip, N.; Malik, N.N.A.; Che Musa, R.

    2010-01-01

    The main purpose in this paper is to create the Geographic Information System (GIS) based analysis on the potential site area for near-surface radioactive waste repository in the state of Negeri Sembilan. There are several parameters should be considered related to the safety assessment in selecting the potential site. These parameters such as land-use, urban area, soil, rainfall, lithology, lineament, geomorphology, landslide potential, slope, elevation, hydrogeology and protected land need to be considered before choosing the site. In this phase, we only consider ten parameters for determining the potential suitable site. (author)

  14. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Volume III (this volume) provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are reference by a TEDS code number in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II. Data sheets are arranged alphanumerically by the TEDS code number in the upper right corner of each sheet.

  15. Deposition of heavy metals from dust fallout in selected areas of Eastern Slovakia

    Directory of Open Access Journals (Sweden)

    Pavel Slančo

    2005-11-01

    Full Text Available The paper deals with an evaluation of the deposition of selected heavy metals in the form of a detailed analysis of the dust fallout. The loaded areas of Nižná Slaná and Jelšava with the mining and mineral processing industry of siderite ore and magnesite, the area of Krompachy with the copper metal works, the municipal and industrial environs of Košice and relatively clean area of the National Park of Slovak Paradise were monitored and compared. The results have shown significant differences in the qualitative and quantitative effect on the monitored areas. The values of heavy metals content in the dust fallout of the loaded areas exceeded by order the values detected in the Slovak Paradise. As to the mining areas of Nižná Slaná and Jelšava, the highest content of heavy metals was recorded in the case of Mn and As. The metallurgical area of Krompachy is mostly loaded by Cu, Pb, As and Cd..

  16. Proposed Project Selection Method for Human Support Research and Technology Development (HSR&TD)

    Science.gov (United States)

    Jones, Harry

    2005-01-01

    The purpose of HSR&TD is to deliver human support technologies to the Exploration Systems Mission Directorate (ESMD) that will be selected for future missions. This requires identifying promising candidate technologies and advancing them in technology readiness until they are acceptable. HSR&TD must select an may of technology development projects, guide them, and either terminate or continue them, so as to maximize the resulting number of usable advanced human support technologies. This paper proposes an effective project scoring methodology to support managing the HSR&TD project portfolio. Researchers strongly disagree as to what are the best technology project selection methods, or even if there are any proven ones. Technology development is risky and outstanding achievements are rare and unpredictable. There is no simple formula for success. Organizations that are satisfied with their project selection approach typically use a mix of financial, strategic, and scoring methods in an open, established, explicit, formal process. This approach helps to build consensus and develop management insight. It encourages better project proposals by clarifying the desired project attributes. We propose a project scoring technique based on a method previously used in a federal laboratory and supported by recent research. Projects are ranked by their perceived relevance, risk, and return - a new 3 R's. Relevance is the degree to which the project objective supports the HSR&TD goal of developing usable advanced human support technologies. Risk is the estimated probability that the project will achieve its specific objective. Return is the reduction in mission life cycle cost obtained if the project is successful. If the project objective technology performs a new function with no current cost, its return is the estimated cash value of performing the new function. The proposed project selection scoring method includes definitions of the criteria, a project evaluation

  17. Interim action record of decision remedial alternative selection: TNX area groundwater operable unit

    International Nuclear Information System (INIS)

    Palmer, E.R.

    1994-10-01

    This document presents the selected interim remedial action for the TNX Area Groundwater Operable Unit at the Savannah River Site (SRS), which was developed in accordance with CERCLA of 1980, as amended by the Superfund Amendments and Reauthorization Act (SARA) of 1986, and to the extent practicable, the National Oil and Hazardous Substances Pollution contingency Plan (NCP). This decision is based on the Administrative Record File for this specific CERCLA unit

  18. Columbia River : Select Area Fishery Evaluation project : 1995-96 Annual Reports.

    Energy Technology Data Exchange (ETDEWEB)

    Hirose, Paul; Miller, Marc; Hill, Jim

    1998-06-01

    Water quality monitoring was conducted from November 1994 through October 1996 at five Oregon and three Washington select area study sites in the lower Columbia River. Physicochemical monitoring and aquatic biomonitoring programs were established to profile baseline parameters at each study site and document differences between study sites. Data collected at study sites where fish rearing operations were initiated indicate a potential negative impact on the surrounding benthic invertebrate communities.

  19. Selective area deposition of diamond films on AlGaN/GaN heterostructures

    Czech Academy of Sciences Publication Activity Database

    Ižák, Tibor; Babchenko, Oleg; Jirásek, Vít; Vanko, G.; Vallo, M.; Vojs, M.; Kromka, Alexander

    2014-01-01

    Roč. 250, č. 12 (2014), 2574-2580 ISSN 0370-1972 R&D Projects: GA ČR(CZ) GP14-16549P Institutional support: RVO:68378271 Keywords : circular high electron mobility transistors * diamond films * GaN substrates * microwave chemical vapor deposition * selective area deposition Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.489, year: 2014

  20. Selected area growth integrated wavelength converter based on PD-EAM optical logic gate

    International Nuclear Information System (INIS)

    Niu Bin; Zhou Daibing; Zhang Can; Liang Song; Lu Dan; Zhao Lingjuan; Wang Wei; Qiu Jifang; Wu Jian

    2014-01-01

    A selected area growth wavelength converter based on a PD-EAM optical logic gate for WDM application is presented, integrating an EML transmitter and a SOA-PD receiver. The design, fabrication, and DC characters were analyzed. A 2 Gb/s NRZ signal based on the C-band wavelength converted to 1555 nm with the highest extinction ratio of 7 dB was achieved and wavelength converted eye diagrams with eyes opened were presented. (semiconductor devices)

  1. Residual strain in the Nb-H system measured by selected area diffraction (SAD)

    International Nuclear Information System (INIS)

    Bulhoes, I.A.M.; Akune, K.; Pinatti, Dyonisio G.

    1981-07-01

    Various specimens of Nb were annealed in vacuum of 10 -3 torr for four hours at 1770 0 K. These speciments were doped with hydrogen up to 1000 ppm by weight and then were analyzed selected area diffraction. The line resolution of the electron channelling pattern was meassured for the specimens with different hydrogen content. These measurements, combined with the measurement of density, permitted one to estimate the residual strain caused by hydrogen. (Author) [pt

  2. Solar Lighting Technologies for Highway Green Rest Areas in China: Energy Saving Economic and Environmental Evaluation

    Directory of Open Access Journals (Sweden)

    Xiaochun Qin

    2015-01-01

    Full Text Available In this paper, taking Lushan West Sea highway green rest area in Jiangxi Province of China as the case study, the suitable types, applicability, advantages, and effective methods of solar lighting technologies for highway rest area were determined based on the analysis of characteristics of highway green rest area. It was proved that solar lighting technologies including the natural light guidance system, solar LED lighting, and maximizing natural light penetration were quite suitable for highway rest area in terms of lighting effects and energy and economic efficiency. The illuminance comparison of light guidance system with electrical lighting was made based on the on-site experiment. Also, the feasibility of natural light guidance system was well verified in terms of the lighting demand of the visitor centre in the rest area by the illuminance simulation analysis. The evaluation of the energy saving, economic benefits, and environmental effects of solar lighting technologies for highway rest area was, respectively, made in detail. It was proved that the application of solar technology for green lighting of highway rest facilities not only could have considerable energy saving capacity and achieve high economic benefits, but also make great contributions to the reduction of environment pollution.

  3. Body-Selective Areas in the Visual Cortex are less active in Children than in Adults

    Directory of Open Access Journals (Sweden)

    Paddy D Ross

    2014-11-01

    Full Text Available Our ability to read other people’s non-verbal signals gets refined throughout childhood and adolescence. How this is paralleled by brain development has been investigated mainly with regards to face perception, showing a protracted functional development of the face-selective visual cortical areas. In view of the importance of whole-body expressions in interpersonal communication it is important to understand the development of brain areas sensitive to these social signals.Here we used functional magnetic resonance imaging (fMRI to compare brain activity in a group of 24 children (age 6-11 and 26 adults while they passively watched short videos of body or object movements. We observed activity in similar regions in both groups; namely the extra-striate body area (EBA, fusiform body area (FBA, posterior superior temporal sulcus (pSTS, amygdala and premotor regions. Adults showed additional activity in the inferior frontal gyrus. Within the main body-selective regions (EBA, FBA and pSTS, the strength and spatial extent of fMRI signal change was larger in adults than in children. Multivariate Bayesian analysis showed that the spatial pattern of neural representation within those regions did not change over age.Our results indicate, for the first time, that body perception, like face perception, is still maturing through the second decade of life.

  4. Decision Analysis Science Modeling for Application and Fielding Selection Applied to Concrete Decontamination Technologies

    International Nuclear Information System (INIS)

    Ebadian, M.A.; Ross, T.L.

    1998-01-01

    Concrete surfaces contaminated with radionuclides present a significant challenge during the decontamination and decommissioning (D and D) process. As structures undergo D and D, coating layers and/or surface layers of the concrete containing the contaminants must be removed for disposal in such a way as to present little to no risk to human health or the environment. The selection of a concrete decontamination technology that is safe, efficient, and cost-effective is critical to the successful D and D of contaminated sites. To support U.S. Department of Energy (DOE) Environmental Management objectives and to assist DOE site managers in the selection of the best-suited concrete floor decontamination technology(s) for a given site, two innovative and three baseline technologies have been assessed under standard, non-nuclear conditions at the Hemispheric Center for Environmental Technology (HCET) at Florida International University (FIU). The innovative technologies assessed include the Pegasus Coating Removal System and Textron's Electro-Hydraulic Scabbling System. The three baseline technologies assessed include: the Wheelabrator Blastrac model 1-15D, the NELCO Porta Shot Blast trademark model GPx-1O-18 HO Rider, and the NELCO Porta Shot Blasttrademark model EC-7-2. These decontamination technology assessments provide directly comparable performance data that have previously been available for only a limited number of technologies under restrictive site-specific constraints. Some of the performance data collected during these technology assessments include: removal capability, production rate, removal gap, primary and secondary waste volumes, and operation and maintenance requirements. The performance data generated by this project is intended to assist DOE site managers in the selection of the safest, most efficient, and cost-effective decontamination technologies to accomplish their remediation objectives

  5. The Application Study in Solar Energy Technology for Highway Service Area: A Case Study of West Lushan Highway Low-Carbon Service Area in China

    OpenAIRE

    Qin, Xiaochun; Shen, Yi; Shao, Shegang

    2015-01-01

    A lot of research works have been made concerning highway service area or solar technology and acquired great achievements. However, unfortunately, few works have been made combining the two topics together of highway service areas and solar energy saving to make a systemic research on solar technology application for highway service area. In this paper, taking West Lushan highway low-carbon service area in Jiangxi Province of China as the case study, the advantages, technical principles, and...

  6. Emerging Technologies and Techniques for Wide Area Radiological Survey and Remediation

    Energy Technology Data Exchange (ETDEWEB)

    Sutton, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zhao, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-03-24

    Technologies to survey and decontaminate wide-area contamination and process the subsequent radioactive waste have been developed and implemented following the Chernobyl nuclear power plant release and the breach of a radiological source resulting in contamination in Goiania, Brazil. These civilian examples of radioactive material releases provided some of the first examples of urban radiological remediation. Many emerging technologies have recently been developed and demonstrated in Japan following the release of radioactive cesium isotopes (Cs-134 and Cs-137) from the Fukushima Dai-ichi nuclear power plant in 2011. Information on technologies reported by several Japanese government agencies, such as the Japan Atomic Energy Agency (JAEA), the Ministry of the Environment (MOE) and the National Institute for Environmental Science (NIES), together with academic institutions and industry are summarized and compared to recently developed, deployed and available technologies in the United States. The technologies and techniques presented in this report may be deployed in response to a wide area contamination event in the United States. In some cases, additional research and testing is needed to adequately validate the technology effectiveness over wide areas. Survey techniques can be deployed on the ground or from the air, allowing a range of coverage rates and sensitivities. Survey technologies also include those useful in measuring decontamination progress and mapping contamination. Decontamination technologies and techniques range from non-destructive (e.g., high pressure washing) and minimally destructive (plowing), to fully destructive (surface removal or demolition). Waste minimization techniques can greatly impact the long-term environmental consequences and cost following remediation efforts. Recommendations on technical improvements to address technology gaps are presented together with observations on remediation in Japan.

  7. Participatory Evaluation of Monitoring and Modeling of Sustainable Land Management Technologies in Areas Prone to Land Degradation

    Science.gov (United States)

    Stringer, L. C.; Fleskens, L.; Reed, M. S.; de Vente, J.; Zengin, M.

    2014-11-01

    Examples of sustainable land management (SLM) exist throughout the world. In many cases, SLM has largely evolved through local traditional practices and incremental experimentation rather than being adopted on the basis of scientific evidence. This means that SLM technologies are often only adopted across small areas. The DESIRE (DESertIfication mitigation and REmediation of degraded land) project combined local traditional knowledge on SLM with empirical evaluation of SLM technologies. The purpose of this was to evaluate and select options for dissemination in 16 sites across 12 countries. It involved (i) an initial workshop to evaluate stakeholder priorities (reported elsewhere), (ii) field trials/empirical modeling, and then, (iii) further stakeholder evaluation workshops. This paper focuses on workshops in which stakeholders evaluated the performance of SLM technologies based on the scientific monitoring and modeling results from 15 study sites. It analyses workshop outcomes to evaluate how scientific results affected stakeholders' perceptions of local SLM technologies. It also assessed the potential of this participatory approach in facilitating wider acceptance and implementation of SLM. In several sites, stakeholder preferences for SLM technologies changed as a consequence of empirical measurements and modeling assessments of each technology. Two workshop examples are presented in depth to: (a) explore the scientific results that triggered stakeholders to change their views; and (b) discuss stakeholders' suggestions on how the adoption of SLM technologies could be up-scaled. The overall multi-stakeholder participatory approach taken is then evaluated. It is concluded that to facilitate broad-scale adoption of SLM technologies, de-contextualized, scientific generalisations must be given local context; scientific findings must be viewed alongside traditional beliefs and both scrutinized with equal rigor; and the knowledge of all kinds of experts must be

  8. Municipal Solid Waste Composition Study of Selected Area in Gambang, Pahang

    Science.gov (United States)

    Mokhtar, Nadiah; Ishak, Wan Faizal Wan; Suraya Romali, Noor; Fatimah Che Osmi, Siti; Armi Abu Samah, Mohd

    2013-06-01

    The amount of municipal solid waste (MSW) generated continue to increase in response to rapid growth in population, change in life style and accelerated urbanization and industrialization process. The study on MSW is important in order to determine the composition further seeks an immediate remedy to minimize the waste generated at the early stage. As most of the MSW goes to the landfill or dumping sites, particularly in Malaysia, closure of filled-up landfill may become an alarm clock for an immediate action of proper solid waste management. This research aims to determine the waste composition generated from selected residential area at Gambang, Kuantan, Pahang which represent Old residential area (ORA), Intermediate residential area (IRA) and New residential area (NRA). The study was conducted by segregating and weighing solid waste in the residential area into 6 main components ie., food waste, paper, plastic, glass, metal and others. In a period of four weeks, samples from the residential unit were taken and analyzed. The MSW generation rates were recorded vary from 0.217 to 0.388 kg person-1day-1. Food waste has become the major solid waste component generated daily which mounted up to 50%. From this research, the result revealed that the recyclable composition of waste generated by residents have a potential to be reuse, recycle and reduce at the point sources.

  9. Municipal Solid Waste Composition Study of Selected Area in Gambang, Pahang

    International Nuclear Information System (INIS)

    Mokhtar, Nadiah; Romali, Noor Suraya; Osmi, Siti Fatimah Che; Ishak, Wan Faizal Wan; Samah, Mohd Armi Abu

    2013-01-01

    The amount of municipal solid waste (MSW) generated continue to increase in response to rapid growth in population, change in life style and accelerated urbanization and industrialization process. The study on MSW is important in order to determine the composition further seeks an immediate remedy to minimize the waste generated at the early stage. As most of the MSW goes to the landfill or dumping sites, particularly in Malaysia, closure of filled-up landfill may become an alarm clock for an immediate action of proper solid waste management. This research aims to determine the waste composition generated from selected residential area at Gambang, Kuantan, Pahang which represent Old residential area (ORA), Intermediate residential area (IRA) and New residential area (NRA). The study was conducted by segregating and weighing solid waste in the residential area into 6 main components ie., food waste, paper, plastic, glass, metal and others. In a period of four weeks, samples from the residential unit were taken and analyzed. The MSW generation rates were recorded vary from 0.217 to 0.388 kg person −1 day −1 . Food waste has become the major solid waste component generated daily which mounted up to 50%. From this research, the result revealed that the recyclable composition of waste generated by residents have a potential to be reuse, recycle and reduce at the point sources.

  10. Decentralized Hierarchical Controller Design for Selective Damping of Inter Area Oscillations Using PMU Signals

    Directory of Open Access Journals (Sweden)

    Ashfaque Ahmed Hashmani

    2011-07-01

    Full Text Available This paper deals with the decentralized hierarchical PSS (Power System Stabilizer controller design to achieve a better damping of specific inter-area oscillations. The two-level decentralized hierarchical structure consists of two PSS controllers. The first level controller is a local PSS controller for each generator to damp local mode in the area where controller is located. This controller uses only local signals as input signals. The local signal comes from the generator at which the controller is located. The secondary level controller is a multivariable decentralized global PSS controller to damp inter-area modes. This controller uses selected suitable wide area PMU (Phasor Measurement Units signals as inputs. The PMU or global signals are taken from network locations where the oscillations are well observable. The global controller uses only those global input signals in which the assigned single inter-area mode is most observable and is located at a generator that is most effective in controlling the assigned mode. The global controller works mainly in a frequency band given by the natural frequency of the assigned mode. The effectiveness of the resulting hierarchical controller is demonstrated through simulation studies conducted on a test power system.

  11. Technology strategy for enhanced recovery; Technology Target Areas; TTA3 - enhanced recovery

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    The Norwegian Continental Shelf (NCS) is facing new challenges in reserve replacement and improved recovery in order to maintain the overall oil production rate from the area. A new target for an increase in oil reserves of 800 million Sm3 of oil (5 billion barrels) by year 2015 has been set by NPD. This is an ambitious goal considering several of the large fields are on a steep decline, and most of the recent discoveries are relatively small. A significant part of these increased reserves will have to come from fields currently on production, from reservoir areas that have been partly or fully swept, and it is therefore evident that Enhanced Oil Recovery (EOR) methods have to play a key role in achieving this target. EOR methods can be divided into gas based EOR methods and water based EOR methods. Thermal methods are not considered applicable on the NCS due to the relatively light oils present, and the depth of the reservoirs. Gas Based EOR; Water Based EOR; CO{sub 2} injection; Surfactants; Air injection; Polymer; Nitrogen injection; Alkaline; Flue gas injection; Polymer gels; WAG; MEOR; FAWAG. The former OG21 strategy document gave high priority to Water Alternating Gas (WAG) methods and CO{sub 2} injection for enhanced recovery. A lot of research and development and evaluation projects on CO{sub 2} injection were launched and are on-going, most of these are being CO{sub 2} WAG studies. The main challenge now in order to realize CO{sub 2} injection on the NCS is on CO{sub 2} availability and transport. It is also believed that increasing gas prices will limit the availability of hydrocarbon gas for injection purposes in the future. There is, however, a clear need for developing alternative cost efficient EOR methods that can improve the sweep efficiency significantly. Since a majority of the fields on the NCS are being produced under water flooding (or WAG), methods that can improve the water flooding efficiency by chemical additives are of special interest and

  12. Selective depredation of planted hardwood seedlings by wild pigs in a wetland restoration area

    International Nuclear Information System (INIS)

    Mayer, J.J.

    1999-01-01

    Following the planting of several thousand hardwood seedlings in a 69-ha wetland restoration area in west-central South Carolina, wild pigs (Sus scrofa) depredated a large percentage of the young trees. This planting was undertaken as part of a mitigation effort to restore a bottomland hardwood community in the corridor and delta of a third order stream that had been previously impacted by the discharge of heated nuclear reactor effluent. The depredated restoration areas had been pretreated with both herbicide and control burning prior to planting the hardwood seedlings. After discovery of the wild pig damage, these areas were surveyed on foot to assess the magnitude of the depredation on the planted seedling crop. Foraging by the local wild pigs in the pretreatment areas selectively impacted only four of the nine hardwood species used in this restoration effort. Based on the surveys, the remaining five species did not appear to have been impacted at all. A variety of reasons could be used to explain this phenomenon. The pretreatment methodology is thought to have been the primary aspect of the restoration program that initially led the wild pigs to discover the planted seedlings. In addition, it is possible that a combination of other factors associated with odor and taste may have resulted in the selective depredation. Future wetland restoration efforts in areas with wild pigs should consider pretreatment methods and species to be planted. If pretreatment methods and species such as discussed in the present study must be used, then the prior removal of wild pigs from surrounding lands will help prevent depredations by this non-native species

  13. Selective depredation of planted hardwood seedlings by wild pigs in a wetland restoration area

    Energy Technology Data Exchange (ETDEWEB)

    Mayer, J.J.

    1999-12-17

    Following the planting of several thousand hardwood seedlings in a 69-ha wetland restoration area in west-central South Carolina, wild pigs (Sus scrofa) depredated a large percentage of the young trees. This planting was undertaken as part of a mitigation effort to restore a bottomland hardwood community in the corridor and delta of a third order stream that had been previously impacted by the discharge of heated nuclear reactor effluent. The depredated restoration areas had been pretreated with both herbicide and control burning prior to planting the hardwood seedlings. After discovery of the wild pig damage, these areas were surveyed on foot to assess the magnitude of the depredation on the planted seedling crop. Foraging by the local wild pigs in the pretreatment areas selectively impacted only four of the nine hardwood species used in this restoration effort. Based on the surveys, the remaining five species did not appear to have been impacted at all. A variety of reasons could be used to explain this phenomenon. The pretreatment methodology is thought to have been the primary aspect of the restoration program that initially led the wild pigs to discover the planted seedlings. In addition, it is possible that a combination of other factors associated with odor and taste may have resulted in the selective depredation. Future wetland restoration efforts in areas with wild pigs should consider pretreatment methods and species to be planted. If pretreatment methods and species such as discussed in the present study must be used, then the prior removal of wild pigs from surrounding lands will help prevent depredations by this non-native species.

  14. Chemical Composition of Selected Beetroot Juices in Relation to Beetroot Production System and Processing Technology

    OpenAIRE

    Renata KAZIMIERCZAK; Agata SIŁAKIEWICZ; Ewelina HALLMANN; Dominika ŚREDNICKA-TOBER; Ewa REMBIAŁKOWSKA

    2016-01-01

    Market offer of vegetable juices in Europe is growing, and the vegetable species and processing technologies used become more diversified resulting in a large range of juice types. At the same time consumers look for natural and safe products with pro-health properties. The aim of this study was to evaluate the nutritional composition of selected juices based on beetroots coming from different agricultural systems and processed according to different technologies. Research material consisted ...

  15. Measuring process performance within healthcare logistics - a decision tool for selecting measuring technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    Performance measurement can support the organization in improving the efficiency and effectiveness of logistical healthcare processes. Selecting the most suitable technologies is important to ensure data validity. A case study of the hospital cleaning process at a public Danish hospital...... was conducted. Monitoring tasks and ascertaining quality of work is difficult in such a process. Based on principal-agent theory, a set of decision indicator has been developed, and a decision framework for assessing technologies to enable performance measurement has been proposed....

  16. DEVELOPMENT OF METHODS OF ESTIMATION, ANALYSIS, SUBSTANTIATION AND SELECTION OF ORGANIZATIONAL AND TECHNOLOGICAL DECISIONS FOR RECONSTRUCTION OF INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    SIEDIN V. L.

    2017-02-01

    Full Text Available Raising of problem. Over the past decade, changes in the economy have led to the decline of many industrial enterprises, which in turn led to the emergence of abandoned buildings and degraded areas that create a social and environmental hazard. Accordingly, the buildings and structures of such enterprises do not function and need reconstruction. Purpose of the aricle. Study of the development of methods for assessing, analyzing, substantiating and selecting rational organizational and technological decisions for the reconstruction of industrial enterprises. Conclusion. With the aim of transforming degraded and disordered territories into modern centers of vital activity, it is necessary to identify in each populated area the areas of priority renovation and reconstruction, and also to concentrate budgetary funds and private investments for the implementation of such projects. In the implementation of the above measures, the settlements will be systematically updated in accordance with european standards.

  17. A multi-attribute decision model for portfolio selection aiming to replace technologies in industrial motor systems

    International Nuclear Information System (INIS)

    Vanderley Herrero Sola, Antonio; Mota, Caroline Maria de Miranda

    2012-01-01

    Highlights: ► We propose a multicriteria decision model for technology replacement. ► We prioritize induction motors in order to improve the energy efficiency. ► The best portfolio of options is selected based on decision maker’s utilities. ► The model contribute to surpass some organizational barriers. - Abstract: The energy efficient technologies offered by the market are in constant evolution, but their insertion in the productive sector comes up against organizational barriers, which obstruct decision making in firms. This paper proposes a multicriteria decision model in order to replace technologies in industrial energy systems, regarding organizational barriers for energy efficiency. The proposed model is applied in industrial motor systems, using Multi-Attribute Utility Theory (MAUT), in order to select the best portfolio of options based on the decision maker’s utilities. Portfolios of options from the prioritized set of motors compiled by the operational area of the studied industry are analyzed, including diverse suppliers and different classes of motors. The results show that it is essential to structure the proposed model in two steps, beginning with the operational level, to ensure that important technologies for the production system are prioritized, thus preserving the interests of the organization and improving the efficiency of industrial energy systems.

  18. SUPPLIER SELECTION STRATEGY AND MANUFACTURING FLEXIBILITY: IMPACT OF QUALITY AND TECHNOLOGY ROADMAPS

    Directory of Open Access Journals (Sweden)

    Muhamad Jantan

    2006-01-01

    Full Text Available The study evaluates the relationship between technology, quality, cost and delivery performance-based, supplier selection strategies, and manufacturing flexibilities namely, product flexibility, launch flexibility, and volume flexibility. Moreover, the moderating impact of supplier management strategies, namely quality roadmap and technology roadmap on the above relationships were also explored. The data for the study was drawn from a sample of companies listed in the factory directory published by the Penang Development Corporation (PDC. A postal survey of 120 manufacturers provided a return of 92 usable responses. The results reveal that the selection of suppliers based on technological and quality performance positively affects all the three dimensions of manufacturing flexibility, with complementary effects of good technology and quality roadmaps. Technology and quality roadmaps act as predictors for product and volume flexibilities. However, when launch flexibility is the focus, both technology and quality roadmaps moderate the impact of supplier selection strategies. Details of the findings, theoretical and practical implications, and the research limitation are discussed.

  19. DETERMINATION OF DIVERSE ENVIRONMENTAL POLLUTION LEVEL FROM SELECTED AREAS OF RAWALPINDI, PAKISTAN

    Directory of Open Access Journals (Sweden)

    S. Pervez

    2017-08-01

    Full Text Available Anthropogenic contaminants arising from both stationary (power plants, industries and residential heating and mobile sources (road traffic can harm ambient air quality in urban areas. Depending upon their physical state, these pollutants are classified as liquid and vapor phases and are subsequently transported to the Earth’s surface through dry and wet deposition. After the deposition of these pollutants onto the surface of earth various health effects caused by these pollutants occurred like cardiovascular diseases and hypertension. In this study four different locations/sites were selected from the Rawalpindi city depending upon the population, traffic rush and industries to examine the noise level, concentration of carbon dioxide and heavy metals. Air sampler was used for the collection of air sample to analyze the heavy metal concentration, Quest electronic sound meter for measuring sound level and SIBATA for CO2 measurement. The study findings revealed that noise level was higher at all selected locations as described by WHO limit (70 dB being highest at Industrial area due to heavy machinery and lowest at green area. Concentration of all four heavy metals were high as compared with the prescribed limits. CO2 level reaches up to 300 ppm because of coal consumption during the winter season. The threshold values of all these selected parameters well above the prescribed limits defined by the authorities so to combat with this situation we should move towards more energy efficient fuels, proper maintenance of vehicles and machineries, traffic management and installation of noise barriers in industries as well as installation of catalytic convertors in vehicles to stop further air pollution.

  20. Addressing service delivery in rural areas through deployment of information and communication technology platforms

    CSIR Research Space (South Africa)

    Foko, Thato E

    2017-05-01

    Full Text Available deployment of ICT Platforms in the rural areas. The contribution of ICT Platform adds to the important notion of access which enhances service delivery. This is seen through the Technology Acceptance Models used in this paper. The main research methodology...

  1. Brokerage and SME Innovation: An Analysis of the Technology Transfer Service at Area Science Park, Italy

    Science.gov (United States)

    Cattapan, Paolo; Passarelli, Mariacarmela; Petrone, Michele

    2012-01-01

    This paper contributes to the literature on innovation brokerage by analysing the effects of brokerage activities on the innovation and growth of small and medium-sized enterprises (SMEs). The authors provide a detailed description of the Technology Transfer Service (TTS), credited as a European best-practice innovation broker, at Area Science…

  2. Large-area graphene films by simple solution casting of edge-selectively functionalized graphite.

    Science.gov (United States)

    Bae, Seo-Yoon; Jeon, In-Yup; Yang, Jieun; Park, Noejung; Shin, Hyeon Suk; Park, Sungjin; Ruoff, Rodney S; Dai, Liming; Baek, Jong-Beom

    2011-06-28

    We report edge-selective functionalization of graphite (EFG) for the production of large-area uniform graphene films by simply solution-casting EFG dispersions in dichloromethane on silicon oxide substrates, followed by annealing. The resultant graphene films show ambipolar transport properties with sheet resistances of 0.52-3.11 kΩ/sq at 63-90% optical transmittance. EFG allows solution processing methods for the scalable production of electrically conductive, optically transparent, and mechanically robust flexible graphene films for use in practice.

  3. The Importance of a Proper Selection Area to be Biopsied in Nodular Leukoplakia: a Case Report

    Directory of Open Access Journals (Sweden)

    Paulo Sérgio da Silva Santos

    2014-01-01

    Full Text Available Nodular leukoplakia is a non-homogeneous type of oral leukoplakia presenting a white surface with verrucous, nodular, ulcerated or erythematous features with a greater risk of malignant transformation when compared to the homogeneous type. Common sites of involvement include lip commissures, buccal mucosa and soft palate. It is often associated with epithelial dysplasia or carcinoma and requires detailed microscopic assessment and regular follow-up. The importance of a proper selection of the area to be biopsied and the close teamwork between a dentist and oral pathologist is the basis of providing an accurate final diagnosis.

  4. On year Study of Atmospheric Polychlorinated Biphenyls in a Selected Area of Madrid

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Alonso, S.; Perez Pastor, R. M.; Sevillano Castano, M. L.

    2002-07-01

    Monthly ambient air and surface soil samples were taken for analysis in the outskirts of Madrid in an open urban area from November 1998 to October 1999. Thirty-one congeners were selected according to their abundance in environmental samples. A comparison of the data so produced with concentration levels obtained in urban centre samples and compiled data was performed. Temperatures higher than 10 degree centigree resulted in increasing ambient air levis and a peak concentration was also observed when wind velocity ranged between 2.5 and 3.5 m.s''-1. (Author) 27 refs.

  5. One Year Study of Atmospheric Polychlorinated Biphenyls in a Selected Area of Madrid

    International Nuclear Information System (INIS)

    Garcia Alonso, S.; Perez Pastor, R. M.; Sevillano CastaNo, M. L.

    2002-01-01

    Monthly ambient air and surface soil samples were taken for analysis in the outskirts of Madrid in an open urban area from November 1998 to October 1999. Thirty-one congeners were selected according to their abundance in environmental samples. A comparison of the data so produced with concentration levels obtained in urban centre samples and compiled data was performed. Temperatures higher than 10 degree centigree resulted in increasing ambient air levels and a peak concentration was also observed when wind velocity ranged between 2.5 and 3.5 m.s 1 . (Author) 27 refs

  6. Potential Offshore Wind Energy Areas in California: An Assessment of Locations, Technology, and Costs

    Energy Technology Data Exchange (ETDEWEB)

    Musial, Walter [National Renewable Energy Lab. (NREL), Golden, CO (United States); Beiter, Philipp [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tegen, Suzanne [National Renewable Energy Lab. (NREL), Golden, CO (United States); Smith, Aaron [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-12-01

    This report summarizes a study of possible offshore wind energy locations, technologies, and levelized cost of energy in the state of California between 2015 and 2030. The study was funded by the U.S. Department of the Interior's Bureau of Ocean Energy Management (BOEM), the federal agency responsible for regulating renewable energy development on the Outer Continental Shelf. It is based on reference wind energy areas where representative technology and performance characteristics were evaluated. These reference areas were identified as sites that were suitable to represent offshore wind cost and technology based on physical site conditions, wind resource quality, known existing site use, and proximity to necessary infrastructure. The purpose of this study is to assist energy policy decision-making by state utilities, independent system operators, state government officials and policymakers, BOEM, and its key stakeholders. The report is not intended to serve as a prescreening exercise for possible future offshore wind development.

  7. The Identification of Technology Platforms and Innovation Areas with High Regional Impact

    Directory of Open Access Journals (Sweden)

    Nataša Urbančíková

    2011-10-01

    Full Text Available The paper is focused on the process of identification of the technological platforms and innovation areas with high regional impact. The aim is to discover future fields of technological innovation which are having a high qualitative and quantitative demand of high potentials. The research has been undertaken within project Innovative Development of European Areas by fostering transnational Knowledge Development – IDEA/ 2CE1175P1 funded by Central Europe Programme. The aim of IDEA project is the development of an adequate strategy which enables the small and medium sized enterprises in the regions of Central Europe to face the increasing demand of high potentials with tested methods and instruments. The target group of IDEA project are so called “high potentials” in the engineering and scientific sector where future-oriented technologies are one of the main sources of innovation.

  8. Smart Home Communication Technologies and Applications: Wireless Protocol Assessment for Home Area Network Resources

    Directory of Open Access Journals (Sweden)

    Tiago D. P. Mendes

    2015-07-01

    Full Text Available The paper discusses Home Area Networks (HAN communication technologies for smart home and domestic application integration. The work is initiated by identifying the application areas that can benefit from this integration. A broad and inclusive home communication interface is analysed utilizing as a key piece a Gateway based on machine-to-machine (M2M communications that interacts with the surrounding environment. Then, the main wireless networks are thoroughly assessed, and later, their suitability to the requirements of HAN considering the application area is analysed. Finally, a qualitative analysis is portrayed.

  9. Automated selection of areas of interest in dynamic studies and camera-cinematograpy of the heart

    International Nuclear Information System (INIS)

    Bitter, F.; Adam, W.E.; Kampmann, H.; Meyer, G.; Weller, R.

    1975-01-01

    Progress is reported in heart investigations using the first transit principle and the steady-state procedure for radionuclide scanning. Progress in the first transit principle relies on automated selection of areas of interest. A procedure has been developed which automatically performs the evaluation of the areas corresponding to the right heart, the lungs, and the left heart. A different procedure has been built up for dynamic lung studies with Xe-133 (Radiospirometry), which principally can be applied to any other organ investigation. R-wave time averaged procedures of the heart in steady state can be performed in direct or indirect manner. A direct procedure is described that leads eventually to a cinematographic presentation of the heart kinetics on the computer display. The analysis yields an exact outline of heart ventricles and auricles as prerequisite for determination of ejection fractions and clinically relevant data of the heart function

  10. Optimal selection of LQR parameter using AIS for LFC in a multi-area power system

    Directory of Open Access Journals (Sweden)

    Muhammad Abdillah

    2016-12-01

    Full Text Available This paper proposes a method to optimize the parameter of the linear quadratic regulator (LQR using artificial immune system (AIS via clonal selection. The parameters of LQR utilized in this paper are the weighting matrices Q and R. The optimal LQR control for load frequency control (LFC is installed on each area as a decentralized control scheme. The aim of this control design is to improve the dynamic performance of LFC automatically when unexpected load change occurred on power system network. The change of load demands 0.01 p.u used as a disturbance is applied to LFC in Area 1. The proposed method guarantees the stability of the overall closed-loop system. The simulation result shows that the proposed method can reduce the overshoot of the system and compress the time response to steady-state which is better compared to trial error method (TEM and without optimal LQR control.

  11. Decision Support Model for Selection Technologies in Processing of Palm Oil Industrial Liquid Waste

    Science.gov (United States)

    Ishak, Aulia; Ali, Amir Yazid bin

    2017-12-01

    The palm oil industry continues to grow from year to year. Processing of the palm oil industry into crude palm oil (CPO) and palm kernel oil (PKO). The ratio of the amount of oil produced by both products is 30% of the raw material. This means that 70% is palm oil waste. The amount of palm oil waste will increase in line with the development of the palm oil industry. The amount of waste generated by the palm oil industry if it is not handled properly and effectively will contribute significantly to environmental damage. Industrial activities ranging from raw materials to produce products will disrupt the lives of people around the factory. There are many alternative technologies available to process other industries, but problems that often occur are difficult to implement the most appropriate technology. The purpose of this research is to develop a database of waste processing technology, looking for qualitative and quantitative criteria to select technology and develop Decision Support System (DSS) that can help make decisions. The method used to achieve the objective of this research is to develop a questionnaire to identify waste processing technology and develop the questionnaire to find appropriate database technology. Methods of data analysis performed on the system by using Analytic Hierarchy Process (AHP) and to build the model by using the MySQL Software that can be used as a tool in the evaluation and selection of palm oil mill processing technology.

  12. SELECTION OF KURAU FISHING TECHNOLOGY UNITS Eleutheronema tetradactylum WHICH COMPETITIVE AND SUSTAINABLE

    Directory of Open Access Journals (Sweden)

    Muhammad Natsir Kholis

    2018-01-01

    Full Text Available Environmentally friendly fishing technology unit is needed in sustainable fisheries management. The purpose of this study was to determine the fishing technology unit of kurau competitive and sustainable. Data collection was carried out from July to September 2016 in the Coastal Pambang of Bengkalis District of Riau Province, by using the survey method. The analytical data method used is scoring the biological, technical and socioeconomic aspects the fishing technology unit of kurau. Results of research show that combined analysis of biological, technical and socioeconomic aspects have the value of the VA fishing line function (2.48 is higher than the other three fishing gear. Thus, the fishing line is a selected fishing technology unit of kurau competitive and sustainable in the Coastal Pambang Bengkalis District. Keywords: competitive,coastal pambang, fishing technology, kurau fish,sustainable fishing

  13. Eco-virological survey of Aedes mosquito larvae in selected dengue outbreak areas in Malaysia.

    Science.gov (United States)

    Rohani, A; Aidil Azahary, A R; Malinda, M; Zurainee, M N; Rozilawati, H; Wan Najdah, W M A; Lee, H L

    2014-12-01

    BACKGROUND & OBJECTIVESI: Transovarial transmission of dengue virus in the Aedes vectors is now a well-documented phenomenon reported from many parts of the endemic areas in the world, which played an important role in initiating and maintaining the outbreak in human populations. This study investigated the factors affecting breeding habitats and the relationship with transovarial dengue virus in larvae of Aedes aegypti and Ae. albopictus. Larval surveillance was conducted in dengue outbreak areas in Malaysia from 2008 until 2009. Sampling was carried out based on habitat type, water condition (substrate type), canopy coverage, temperature and pH at breeding habitats. RT-PCR was performed to detect presence of transovarial dengue virus in larvae collected in the study areas. A total of 789 breeding habitats were identified during this study and the majority of these breeding sites were plastic containers (57.46%). Aedes albopictus dominated most of the water condition surveyed, while Ae. aegypti indicated preference toward habitats with clear water. Aedes aegypti was selective in selecting ovipositional sites compared to Ae. albopictus where shaded areas were shown to be the most preferred. From a total of 363 mosquito larvae pools, 23 (6.3%) pools were positive for dengue virus where 18 of them were from Ae. albopictus and five were from Ae. aegypti mosquito larvae pools. This study indicated the presence of transovarial transmission of dengue virus in immature Ae. aegypti and Ae. albopictus in the field. This study also showed that combination of water conditions, canopy coverage, temperature and pH of breeding habitats were the factors affecting the larval population. The study suggested that larval survey programme could serve as a tool not only to monitor the local dengue vector distribution but also to provide objective information for taking appropriate action by the community against dengue vectors.

  14. A GEOGRAPHIC ANALYSIS OF OPTIMAL SIGNAGE LOCATION SELECTION IN SCENIC AREA

    Directory of Open Access Journals (Sweden)

    L. Ruan

    2016-06-01

    Full Text Available As an important part of the scenic area infrastructure services, signage guiding system plays an indispensable role in guiding the way and improving the quality of tourism experience. This paper proposes an optimal method in signage location selection and direction content design in a scenic area based on geographic analysis. The object of the research is to provide a best solution to arrange limited guiding boards in a tourism area to show ways arriving at any scenic spot from any entrance. There are four steps to achieve the research object. First, the spatial distribution of the junction of the scenic road, the passageway and the scenic spots is analyzed. Then, the count of scenic roads intersection on the shortest path between all entrances and all scenic spots is calculated. Next, combing with the grade of the scenic road and scenic spots, the importance of each road intersection is estimated quantitatively. Finally, according to the importance of all road intersections, the most suitable layout locations of signage guiding boards can be provided. In addition, the method is applied in the Ming Tomb scenic area in China and the result is compared with the existing signage guiding space layout.

  15. a Geographic Analysis of Optimal Signage Location Selection in Scenic Area

    Science.gov (United States)

    Ruan, Ling; Long, Ying; Zhang, Ling; Wu, Xiao Ling

    2016-06-01

    As an important part of the scenic area infrastructure services, signage guiding system plays an indispensable role in guiding the way and improving the quality of tourism experience. This paper proposes an optimal method in signage location selection and direction content design in a scenic area based on geographic analysis. The object of the research is to provide a best solution to arrange limited guiding boards in a tourism area to show ways arriving at any scenic spot from any entrance. There are four steps to achieve the research object. First, the spatial distribution of the junction of the scenic road, the passageway and the scenic spots is analyzed. Then, the count of scenic roads intersection on the shortest path between all entrances and all scenic spots is calculated. Next, combing with the grade of the scenic road and scenic spots, the importance of each road intersection is estimated quantitatively. Finally, according to the importance of all road intersections, the most suitable layout locations of signage guiding boards can be provided. In addition, the method is applied in the Ming Tomb scenic area in China and the result is compared with the existing signage guiding space layout.

  16. Present and future assessment of growing degree days over selected Greek areas with different climate conditions

    Science.gov (United States)

    Paparrizos, Spyridon; Matzarakis, Andreas

    2017-10-01

    The determination of heat requirements in the first developing phases of plants has been expressed as Growing Degree Days (GDD). The current study focuses on three selected study areas in Greece that are characterised by different climatic conditions due to their location and aims to assess the future variation and spatial distribution of Growing Degree Days (GDD) and how these can affect the main cultivations in the study areas. Future temperature data were obtained and analysed by the ENSEMBLES project. The analysis was performed for the future periods 2021-2050 and 2071-2100 with the A1B and B1 scenarios. Spatial distribution was performed using a combination of dynamical and statistical downscaling technique through ArcGIS 10.2.1. The results indicated that for all the future periods and scenarios, the GDD are expected to increase. Furthermore, the increase in the Sperchios River basin will be the highest, followed by the Ardas and the Geropotamos River basins. Moreover, the cultivation period will be shifted from April-October to April-September which will have social, economical and environmental benefits. Additionally, the spatial distribution indicated that in the upcoming years the existing cultivations can find favourable conditions and can be expanded in mountainous areas as well. On the other hand, due to the rough topography that exists in the study areas, the wide expansion of the existing cultivations into higher altitudes is unaffordable. Nevertheless, new more profitable cultivations can be introduced which can find propitious conditions in terms of GDD.

  17. Demonstrating the utility of boron based precursor molecules for selective area deposition in a scanning tunneling microscope

    International Nuclear Information System (INIS)

    Perkins, F.K.; Onellion, M.; Lee, S.; Bowben, T.A.

    1992-01-01

    The scanning tunneling microscope (STM) can be used to selectively deposit material from a gaseous precursor compound. Ultrasmall (less than a 100 nm across) spatial dimensions for selective area deposition may be achieved by this means. In this paper the authors outline a scheme foreselecting and designing main group cluster compounds and organometallics for this type of selective area deposition using nido-decaborane(14) as an example

  18. Selection of innovative technologies for the remediation of soils contaminated with radioactive and mixed wastes

    International Nuclear Information System (INIS)

    Steude, J.; Tucker, B.

    1991-01-01

    The remediation of sites containing radioactive and mixed wastes is in a period of rapid growth. The state of the art of remediation is progressing to handle the shortcomings of conventional pump and treat or disposal technologies. The objective of this paper is to review the status of selected innovative technologies which treat soils contaminated with radioactive and mixed waste. Technologies are generally classified as innovative if they are fully developed, but lack sufficient cost or performance data for comparison with conventional technologies. The Environmental Protection Agency recommends inclusion of innovative technologies in the RI/FS screening process if there is reason to believe that they would offer advantages in performance, implementability, cost, etc. This paper serves as a compilation of the pertinent information necessary to gain an overview of the selected innovative technologies to aid in the RI/F'S screening process. The innovative technologies selected for evaluation are listed below. Bioremediation, although innovative, was not included due to the combination of the vast amount of literature on this subject and the limited scope of this project. 1. Soil washing and flushing; 2. Low temperature thermal treatment; 3. Electrokinetics; 4. Infrared incineration; 5. Ultrasound; 6. In situ vitrification; 7. Soil vapor extraction; 8. Plasma torch slagging; 9. In situ hot air/steam extraction; 10. Cyclone reactor treatment; 11. In situ radio frequency; 12. Vegetative radionuclide uptake; and 13. In situ soil heating. The information provided on each technology includes a technical description, status, summary of results including types of contaminants and soils treated, technical effectiveness, feasibility and estimated cost

  19. A decision support system for selecting IT audit areas using a capital budgeting approach / Dewald Philip Pieters

    OpenAIRE

    Pieters, Dewald Philip

    2015-01-01

    Internal audit departments strive to control risk within an organization. To do this they choose specific audit areas to include in an audit plan. In order to select areas, they usually focus on those areas with the highest risk. Even though high risk areas are considered, there are various other restrictions such as resource constraints (in terms of funds, manpower and hours) that must also be considered. In some cases, management might also have special requirements. Traditionally this area...

  20. Selection of Server-Side Technologies for an E-Business Curriculum

    Science.gov (United States)

    Sandvig, J. Christopher

    2007-01-01

    The rapid growth of e-business and e-commerce has made server-side programming an increasingly important topic in information systems (IS) and computer science (CS) curricula. This article presents an overview of the major features of several popular server-side programming technologies and discusses the factors that influence the selection of…

  1. Multicriteria focus to evaluate the operation of technologies of renewable energy in rural areas

    International Nuclear Information System (INIS)

    Cherni, Judith A

    2003-01-01

    This paper evaluates the problem of the selection of renewable energy alternatives in rural regions in the developing world. We discuss a multicriteria method, MAP RESURL, for assessing the effectiveness and sustainability of the energy systems that have been installed in rural areas. The purpose is to improve the effectiveness of energization policies

  2. Multicriteria method to evaluate the operation of technologies of renewable energy in rural areas

    International Nuclear Information System (INIS)

    Cherni, Judilh

    2003-01-01

    This paper evaluates the problem of the selection of renewable energy alternatives in rural regions in the developing world. We discuss a multicriteria method, map result, for assessing the effectiveness and sustainability of the energy systems that have been installed in rural areas. The purpose is to improve the effectiveness of energization policies

  3. Enhancement of collective immunity in Tokyo metropolitan area by selective vaccination against an emerging influenza pandemic.

    Directory of Open Access Journals (Sweden)

    Masaya M Saito

    Full Text Available Vaccination is a preventive measure against influenza that does not require placing restrictions on social activities. However, since the stockpile of vaccine that can be prepared before the arrival of an emerging pandemic strain is generally quite limited, one has to select priority target groups to which the first stockpile is distributed. In this paper, we study a simulation-based priority target selection method with the goal of enhancing the collective immunity of the whole population. To model the region in which the disease spreads, we consider an urban area composed of suburbs and central areas connected by a single commuter train line. Human activity is modelled following an agent-based approach. The degree to which collective immunity is enhanced is judged by the attack rate in unvaccinated people. The simulation results show that if students and office workers are given exclusive priority in the first three months, the attack rate can be reduced from [Formula: see text] in the baseline case down to 1-2%. In contrast, random vaccination only slightly reduces the attack rate. It should be noted that giving preference to active social groups does not mean sacrificing those at high risk, which corresponds to the elderly in our simulation model. Compared with the random administration of vaccine to all social groups, this design successfully reduces the attack rate across all age groups.

  4. Phase analysis of nano-phase materials using selected area electron diffraction in the TEM

    International Nuclear Information System (INIS)

    Labar, J. L.

    2002-01-01

    In analogy to X-ray power diffraction (XRD), we are developing a method to help phase identification when examining a large number of grains simultaneously by electron diffraction. Although XRD is well established, it can not be used for small quantities of materials (volumes below 1 mm 3 ). Examining a usual TEM sample with thickness of 100 nm and using a selected area of 1 mm in diameter, the selected area electron diffraction pattern (SAED) carries information about several thousands of grains from a material with an average grain size of about 10 nm. The accuracy of XRD can not be attained by electron diffraction (ED). However, simultaneous visual observation of the nanostructure is an additional benefit of TEM (beside the small amount of needed material). The first step of the development project was the development of a computer program ('ProcessDiffraction') that processes digital versions of SAED patterns and presents them in an XRD-like form (intensity vs. scattering vector). In the present version (V2.0.3) phase identification is carried out by comparing the measured distribution to 'Markers', i.e. data of known phases. XRD data cards are used if the detailed structure of a phase is not known. Kinematic electron diffraction intensities are calculated for phases with known atomic positions (Author)

  5. Selective area growth of GaN rod structures by MOVPE: Dependence on growth conditions

    Energy Technology Data Exchange (ETDEWEB)

    Li, Shunfeng; Fuendling, Soenke; Wang, Xue; Erenburg, Milena; Al-Suleiman, Mohamed Aid Mansur; Wei, Jiandong; Wehmann, Hergo-Heinrich; Waag, Andreas [Institut fuer Halbleitertechnik, TU Braunschweig, Hans-Sommer-Strasse 66, 38106 Braunschweig (Germany); Bergbauer, Werner [Institut fuer Halbleitertechnik, TU Braunschweig, Hans-Sommer-Strasse 66, 38106 Braunschweig (Germany); Osram Opto Semiconductors GmbH, Leibnizstr. 4, 93055 Regensburg (Germany); Strassburg, Martin [Osram Opto Semiconductors GmbH, Leibnizstr. 4, 93055 Regensburg (Germany)

    2011-07-15

    Selective area growth of GaN nanorods by metalorganic vapor phase epitaxy is highly demanding for novel applications in nano-optoelectronic and nanophotonics. Recently, we report the successful selective area growth of GaN nanorods in a continuous-flow mode. In this work, as examples, we show the morphology dependence of GaN rods with {mu}m or sub-{mu}m in diameters on growth conditions. Firstly, we found that the nitridation time is critical for the growth, with an optimum from 90 to 180 seconds. This leads to more homogeneous N-polar GaN rods growth. A higher temperature during GaN rod growth tends to increase the aspect ratio of the GaN rods. This is due to the enhanced surface diffusion of growth species. The V/III ratio is also an important parameter for the GaN rod growth. Its increase causes reduction of the aspect ratio of GaN rods, which could be explained by the relatively lower growth rate on (000-1) N-polar top surface than it on {l_brace}1-100{r_brace} m-planes by supplying more NH{sub 3} (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  6. Wurtzite InP nanowire arrays grown by selective area MOCVD

    International Nuclear Information System (INIS)

    Chu, Hyung-Joon; Stewart, Lawrence; Yeh, Ting-Wei; Dapkus, P.D.

    2010-01-01

    InP nanowires are a unique material phase because this normally zincblende material forms in the wurtzite crystal structure below a critical diameter owing to the contribution of sidewalls to the total formation energy. This may allow control of the carrier transport and optical properties of InP nanowires for applications such as nano scale transistors, lasers and detectors. In this work, we describe the fabrication of InP nanowire arrays by selective area growth using MOCVD in the diameter range where the wurtzite structure is formed. The spatial growth rate in selective area growth is modeled by a diffusion model for the precursors. The proposed model achieves an average error of 9%. Electron microscopy shows that the grown InP nanowires are in the wurtzite crystal phase with many stacking faults. The threshold diameter of the crystal phase transition of InP nanowires is larger than the thermodynamic estimation. In order to explain this tendency, we propose a surface kinetics model based on a 2 x 2 reconstruction. This model can explain the increased tendency for wurtzite nanowire formation on InP (111)A substrates and the preferred growth direction of binary III-V compound semiconductor nanowires. (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  7. SELECTING WORKING TEAMS FOR INFORMATION TECHNOLOGY OUTSOURCING PROJECTS THROUGH A COMBINATION OF METHODOLOGIES

    Directory of Open Access Journals (Sweden)

    María Alejandra Castellini

    Full Text Available ABSTRACT This paper deals with a problem that Information Technology outsourcing suppliers generally face when selecting a working team technically capable for specific roles in software development projects. A combination of methodologies, interactively integrated, is proposed. They are Soft System Methodology to structure the problem, Repertory Grid for individual interviews and elicitation of the selection criteria, DRV Processes to assess the candidates and to generate knowledge and consensus on the selection process and Linear Programming to assign people to each position. This multimethodology allowed finding a more comprehensive solution than that initially requested by the company, since it helped to establish the necessary transformations for the selection model to operate in the right way, set the competencies to be considered as selection criteria, develop a consensus estimate of the weighted criteria, and award global values to candidates, optimizing the assignment of roles in the group for the project.

  8. Selected Areas in Cryptography - SAC 2013 : 20th International Conference, Burnaby BC, Canada, August 14-16, 2013 : Revised Selected Papers

    NARCIS (Netherlands)

    Lange, T.; Lauter, K.; Lisonek, P.

    2014-01-01

    This book constitutes the proceedings of the 20th International Conference on Selected Areas in Cryptography, SAC 2013, held in Burnaby, Canada, in August 2013. The 26 papers presented in this volume were carefully reviewed and selected from 98 submissions. They are organized in topical sections

  9. Determination of the radon Concentration in underground water in selected areas in and around Kumasi

    International Nuclear Information System (INIS)

    Owusu, Seth Adjei

    2012-06-01

    Radon (Rn-222) is a radioactive noble gas of natural origin that may be found anywhere in soil, air and different types of water: surface, borehole, well and spring. It is worth to carry out surveys for the radon in water for radiation protection as well as for geological considerations. The research presenters here was carried out in selected towns in and around Kumasi for the determination of radon concentration in groundwater. The major towns from which samples were taken are , Mowire, Kronum, Aburaso, Medoma, Kenyase, Buokrom, Bomfa, Ayeduase, Kotei, Tikrom. All the samples are used for domestic purposes such as cooking, drinking, bathing and washing. Waters from boreholes and wells in the selected towns were sampled and the radon concentration level measured. The Roll’s method was used for the radon concentration analysis on all the 100 samples. The results shows that, the minimum radon concentration in groundwater was 13015.934 Bq/m3 and it was found at Bomfa, and the highest was found to be 964628.480 Bq/m3, recorded at Mowire. It is believed that this variation of levels is mainly due to the difference in rock type, soil type and geology of the area as well as the depth of the water samples. This information can be used to estimate the possible health hazards from radon in the selected towns in the future from environmental point of view. The data would promote public awareness related to risk of radon exposure. (au)

  10. Spatial attention enhances the selective integration of activity from area MT.

    Science.gov (United States)

    Masse, Nicolas Y; Herrington, Todd M; Cook, Erik P

    2012-09-01

    Distinguishing which of the many proposed neural mechanisms of spatial attention actually underlies behavioral improvements in visually guided tasks has been difficult. One attractive hypothesis is that attention allows downstream neural circuits to selectively integrate responses from the most informative sensory neurons. This would allow behavioral performance to be based on the highest-quality signals available in visual cortex. We examined this hypothesis by asking how spatial attention affects both the stimulus sensitivity of middle temporal (MT) neurons and their corresponding correlation with behavior. Analyzing a data set pooled from two experiments involving four monkeys, we found that spatial attention did not appreciably affect either the stimulus sensitivity of the neurons or the correlation between their activity and behavior. However, for those sessions in which there was a robust behavioral effect of attention, focusing attention inside the neuron's receptive field significantly increased the correlation between these two metrics, an indication of selective integration. These results suggest that, similar to mechanisms proposed for the neural basis of perceptual learning, the behavioral benefits of focusing spatial attention are attributable to selective integration of neural activity from visual cortical areas by their downstream targets.

  11. Evaluation and selection of aqueous-based technology for partitioning radionuclides from ICPP calcine

    International Nuclear Information System (INIS)

    Olson, A.L.; Schulz, W.W.; Burchfield, L.A.; Carlson, C.D.; Swanson, J.L.; Thompson, M.C.

    1993-02-01

    Early in 1993 Westinghouse Idaho Nuclear Company (WINCO) chartered a Panel of Nuclear Separations Experts. The purpose of this Panel was to assist WINCO scientists and engineers in selecting, evaluating, and ranking candidate aqueous-based processes and technologies for potential use in partitioning selected radionuclides from nitric acid solutions of retrieved Idaho Chemical Processing Plant (ICPP) calcine. Radionuclides of interest are all transuranium elements, 90 Sr, 99 Tc, 129 I, and 137 Cs. The six man Panel met for 4 days (February 16--19, 1993) on the campus of the Idaho State University in Pocatello, Idaho. Principal topics addressed included: Available radionuclide removal technology; applicability of separations technology and processes to ICPP calcine; and potential integrated radionuclide partitioning schemes. This report, prepared from contributions from all Panel members, presents a comprehensive account of the proceedings and significant findings of the February, 1993 meeting in Pocatello

  12. Comparative analyses for selected clean coal technologies in the international marketplace

    Energy Technology Data Exchange (ETDEWEB)

    Szpunar, C.B.; Gillette, J.L.

    1990-07-01

    Clean coal technologies (CCTs) are being demonstrated in research and development programs under public and private sponsorship. Many of these technologies could be marketed internationally. To explore the scope of these international opportunities and to match particular technologies with markets appearing to have high potential, a study was undertaken that focused on seven representative countries: Italy, Japan, Morocco, Turkey, Pakistan, the Peoples' Republic of China, and Poland. The results suggest that there are international markets for CCTs and that these technologies can be cost competitive with more conventional alternatives. The identified markets include construction of new plants and refurbishment of existing ones, especially when decision makers want to decrease dependence on imported oil. This report describes potential international market niches for U.S. CCTs and discusses the status and implications of ongoing CCT demonstration activities. Twelve technologies were selected as representative of technologies under development for use in new or refurbished industrial or electric utility applications. Included are the following: Two generic precombustion technologies: two-stage froth-flotation coal beneficiation and coal-water mixtures (CWMs); Four combustion technologies: slagging combustors, integrated-gasification combined-cycle (IGCC) systems, atmospheric fluidized-bed combustors (AFBCs), and pressurized fluidized-bed combustors (PFBCs); and Six postcombustion technologies: limestone-injection multistage burner (LIMB) systems, gas-reburning sorbent-injection (GRSI) systems, dual-alkali flue-gas desulfurization (FGD), spray-dryer FGD, the NOXSO process, and selective catalytic reduction (SCR) systems. Major chapters of this report have been processed separately for inclusion on the data base.

  13. Wetland Survey of Selected Areas in the Oak Ridge Y-12 Plant Area of Responsibilty, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    Rosensteel.

    1997-01-01

    This document was prepared to summarize wetland surveys performed in the Y- 1 2 Plant area of responsibility in June and July 1994. Wetland surveys were conducted in three areas within the Oak Ridge Y- 12 Plant area of responsibility in June and July 1994: the Upper East Fork Poplar Creek (UEFPC) Operable Unit (OU), part of the Bear Creek Valley OU (the upper watershed of Bear Creek from the culvert under Bear Creek Road upstream through the Y-12 West End Environmental Management Area, and the catchment of Bear Creek North Tributary 1), and part of Chestnut Ridge OU 2 (the McCoy Branch area south of Bethel Valley Road). Using the criteria and methods set forth in the Wetlands Delineation Manual, 18 wetland areas were identified in the 3 areas surveyed; these areas were classified according to the system developed by Cowardin. Fourteen wetlands and one wetland/pond area that are associated with disturbed or remnant stream channels and seeps were identified in the UEFPC OU. Three wetlands were identified in the Bear Creek Valley OU portion of the survey area. One wetland was identified in the riparian zone of McCoy Branch in the southern portion of Chestnut Ridge OU 2

  14. Multi-criteria approach for selecting the best solid waste management technologies

    International Nuclear Information System (INIS)

    Latifah, A.M.; Hassan Basri; Noor Ezlin Ahmad Basri

    2010-01-01

    The growth in urbanization and industrial activities has caused solid waste management problems. As a solution the integrated approach has been chosen to manage the solid waste. Developing and implementing integrated solid waste management involve combined technologies and alternatives which are suitable with local laws condition. This research showed that Analytical Hierarchy Process (AHP) has the potential as a decision making tool that can be used in selecting process of solid waste management technology. Three levels hierarchy was developed with the goal at the top level, followed by criteria and alternatives. By using this technique, the priority of each considered technology will be determined where technology with the highest priority is more suitable to be developed. Sensitivity analysis was carried out to test the sensitivity of final decision towards inconsistency of judgement. Application of AHP to determine priority in selecting solid waste management technology was explained in this research based on a case study in the Port Dickson Municipal Council. Analysis of result showed that the combination of recycling technology and composting are suitable to be applied in the Port Dickson district. (author)

  15. The impact of feedstock cost on technology selection and optimum size

    International Nuclear Information System (INIS)

    Cameron, Jay B.; Kumar, Amit; Flynn, Peter C.

    2007-01-01

    Development of biomass projects at optimum size and technology enhances the role that biomass can make in mitigating greenhouse gas. Optimum sized plants can be built when biomass resources are sufficient to meet feedstock demand; examples include wood and forest harvest residues from extensive forests, and grain straw and corn stover from large agricultural regions. The impact of feedstock cost on technology selection is evaluated by comparing the cost of power from the gasification and direct combustion of boreal forest wood chips. Optimum size is a function of plant cost and the distance variable cost (DVC, $ dry tonne -1 km -1 ) of the biomass fuel; distance fixed costs (DFC, $ dry tonne -1 ) such as acquisition, harvesting, loading and unloading do not impact optimum size. At low values of DVC and DFC, as occur with wood chips sourced from the boreal forest, direct combustion has a lower power cost than gasification. At higher values of DVC and DFC, gasification has a lower power cost than direct combustion. This crossover in most economic technology will always arise when a more efficient technology with a higher capital cost per unit of output is compared to a less efficient technology with a lower capital cost per unit of output. In such cases technology selection cannot be separated from an analysis of feedstock cost

  16. Technical and economic evaluation of selected technologies of the Landfill Characterization System

    Energy Technology Data Exchange (ETDEWEB)

    Floran, R.J.

    1993-12-31

    In 1992 and 1993, numerous innovative and emerging technologies for characterizing metal and mixed waste contaminants and their migration beneath landfills in and environments were field tested at Sandia`s Chemical Waste Landfill. Many of these technologies are being evaluated as part of the Landfill Characterization System (LCS). The LCS emphasizes minimally intrusive technologies and downhole sensors that strive to be cheaper, better, safer and faster than conventional methods. Major aims of the LCS are to demonstrate, test and evaluate these technologies, and determine whether substantial cost saving over traditional baseline methods can be realized. To achieve these goals, the LCS uses an integrated systems approach that stresses the application of complementary and compatible technologies. Successful field demonstrations combined with favorable economics, will greatly assist the commercialization of these technologies to the private sector and to Environmental Restoration groups throughout the DOE Complex. In this paper, a technical and economic evaluation of selected technologies that comprise the LCS is presented. Because sampling and analysis is the most costly part of a characterization effort, the economic evaluation presented here focuses specifically on these activities. LCS technologies discussed include the ``Smart Sampling Methodology`` and two field screening analytical methods, stripping voltammetry and x-ray fluorescence.

  17. A comparison of small-area estimation techniques to estimate selected stand attributes using LiDAR-derived auxiliary variables

    Science.gov (United States)

    Michael E. Goerndt; Vicente J. Monleon; Hailemariam. Temesgen

    2011-01-01

    One of the challenges often faced in forestry is the estimation of forest attributes for smaller areas of interest within a larger population. Small-area estimation (SAE) is a set of techniques well suited to estimation of forest attributes for small areas in which the existing sample size is small and auxiliary information is available. Selected SAE methods were...

  18. NASA Space Technology Draft Roadmap Area 13: Ground and Launch Systems Processing

    Science.gov (United States)

    Clements, Greg

    2011-01-01

    This slide presentation reviews the technology development roadmap for the area of ground and launch systems processing. The scope of this technology area includes: (1) Assembly, integration, and processing of the launch vehicle, spacecraft, and payload hardware (2) Supply chain management (3) Transportation of hardware to the launch site (4) Transportation to and operations at the launch pad (5) Launch processing infrastructure and its ability to support future operations (6) Range, personnel, and facility safety capabilities (7) Launch and landing weather (8) Environmental impact mitigations for ground and launch operations (9) Launch control center operations and infrastructure (10) Mission integration and planning (11) Mission training for both ground and flight crew personnel (12) Mission control center operations and infrastructure (13) Telemetry and command processing and archiving (14) Recovery operations for flight crews, flight hardware, and returned samples. This technology roadmap also identifies ground, launch and mission technologies that will: (1) Dramatically transform future space operations, with significant improvement in life-cycle costs (2) Improve the quality of life on earth, while exploring in co-existence with the environment (3) Increase reliability and mission availability using low/zero maintenance materials and systems, comprehensive capabilities to ascertain and forecast system health/configuration, data integration, and the use of advanced/expert software systems (4) Enhance methods to assess safety and mission risk posture, which would allow for timely and better decision making. Several key technologies are identified, with a couple of slides devoted to one of these technologies (i.e., corrosion detection and prevention). Development of these technologies can enhance life on earth and have a major impact on how we can access space, eventually making routine commercial space access and improve building and manufacturing, and weather

  19. On the selection of financing instruments to push the development of new technologies: Application to clean energy technologies

    International Nuclear Information System (INIS)

    Olmos, Luis; Ruester, Sophia; Liong, Siok-Jen

    2012-01-01

    Achieving climate policy goals requires mobilizing public funds to bring still immature clean technologies to competitiveness and create new technological options. The format of direct public support must be tailored to the characteristics of technologies addressed. Based on the experience accumulated with innovation programs, we have identified those features of innovation that should directly condition the choice of direct support instruments. These include the funding gap between the cost of innovation activities and the amount of private funds leveraged; the ability of technologies targeted to compete for public funds in the market; the probability that these technologies fail to reach the market; and the type of entity best suited to conduct these activities. Clean innovation features are matched to those of direct support instruments to provide recommendations on the use to be made of each type of instrument. Given the large financing gap of most clean energy innovation projects, public grants and contracts should finance a large part of clean pre-deployment innovation. However, public loans, equity investments, prizes and tax credits or rebates can successfully support certain innovation processes at a lower public cost. Principles derived are applied to identify the instrument best suited to a case example. - Highlights: ► Public financing instruments must be tailored to the features of supported innovation. ► Instruments should trigger desired innovation at the lowest public cost possible. ► They should strike the right balance between technology selection and competition. ► Public funds mobilized through them should reach the innovating entity. ► Public loans, equity investments, prizes, and rebates should be used in specific cases.

  20. Mesoscale Assessment of CO2 Storage Potential and Geological Suitability for Target Area Selection in the Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Yujie Diao

    2017-01-01

    Full Text Available In China, south of the Yangtze River, there are a large number of carbon sources, while the Sichuan Basin is the largest sedimentary basin; it makes sense to select the targets for CO2 geological storage (CGUS early demonstration. For CO2 enhanced oil and gas, coal bed methane recovery (CO2-EOR, EGR, and ECBM, or storage in these depleted fields, the existing oil, gas fields, or coal seams could be the target areas in the mesoscale. This paper proposed a methodology of GIS superimposed multisource information assessment of geological suitability for CO2 enhanced water recovery (CO2-EWR or only storage in deep saline aquifers. The potential per unit area of deep saline aquifers CO2 storage in Central Sichuan is generally greater than 50 × 104 t/km2 at P50 probability level, with Xujiahe group being the main reservoir. CO2 storage potential of depleted gas fields is 53.73 × 108 t, while it is 33.85 × 108 t by using CO2-EGR technology. This paper recommended that early implementation of CGUS could be carried out in the deep saline aquifers and depleted gas fields in the Sichuan Basin, especially that of the latter because of excellent traps, rich geological data, and well-run infrastructures.

  1. Identification of Selected Areas to Support Federal Clean Energy Goals Using Small Modular Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Belles, Randy [ORNL; Mays, Gary T [ORNL; Omitaomu, Olufemi A [ORNL; Poore III, Willis P [ORNL

    2013-12-01

    This analysis identifies candidate locations, in a broad sense, where there are high concentrations of federal government agency use of electricity, which are also suitable areas for near-term SMRs. Near-term SMRs are based on light-water reactor (LWR) technology with compact design features that are expected to offer a host of safety, siting, construction, and economic benefits. These smaller plants are ideally suited for small electric grids and for locations that cannot support large reactors, thus providing utilities or governement entities with the flexibility to scale power production as demand changes by adding additional power by deploying more modules or reactors in phases. This research project is aimed at providing methodologies, information, and insights to assist the federal government in meeting federal clean energy goals.

  2. Overview of selected surrogate technologies for high-temporal resolution suspended-sediment monitoring

    Science.gov (United States)

    Gray, John R.; Gartner, Jeffrey W.

    2010-01-01

    Traditional methods for characterizing selected properties of suspended sediments in rivers are being augmented and in some cases replaced by cost-effective surrogate instruments and methods that produce a temporally dense time series of quantifiably accurate data for use primarily in sediment-flux computations. Turbidity is the most common such surrogate technology, and the first to be sanctioned by the U.S. Geological Survey for use in producing data used in concert with water-discharge data to compute sediment concentrations and fluxes for storage in the National Water Information System. Other technologies, including laser-diffraction, digital photo-optic, acoustic-attenuation and backscatter, and pressure-difference techniques are being evaluated for producing reliable sediment concentration and, in some cases, particle-size distribution data. Each technology addresses a niche for sediment monitoring. Their performances range from compelling to disappointing. Some of these technologies have the potential to revolutionize fluvial-sediment data collection, analysis, and availability.

  3. Decision Analysis Modeling for Application and Fielding Selection Applied to Concrete Decontamination Technologies

    International Nuclear Information System (INIS)

    Ebadian, M.A.; Boudreaux, J.F.

    1998-01-01

    The purpose of this two-year investigation is to field test innovative technologies for coating and surface removal on concrete floors and compare the compiled data to baseline technologies, thereby ensuring that the best and most cost-effective options are developed and subsequently used during the decontamination and decommissioning (D and D) of U.S. Department of Energy Environmental Management (DOE-EM) sites. Comprehensive and comparable data will be collected in the areas of health and safety, operations, and secondary waste management. The technologies tested will include DOE-EM funded technologies and commercial non-nuclear technologies that have the potential to meet the environmental restoration objectives. This report summarizes the activities performed during Fiscal Year 1996 (FY96) and describes the planned activities for Fiscal Year 1997 (FY97). Accomplishments for FY96 include the completion of preparatory work to begin field testing of innovative technologies. A total of seven technologies will be tested during FY97. As a part of this project, interactive computer software will be developed during FY97, allowing site-specific parameters and technology performance data to be considered when determining the best option given site-specific conditions

  4. MULTIPLE SELECTIONS OF ALTERNATIVES UNDER CONSTRAINTS: CASE STUDY OF EUROPEAN COUNTRIES IN AREA OF RESEARCH AND DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Andrea Furková

    2015-04-01

    Full Text Available This paper is given over to a multicriteria evaluation approach to the issue of international comparison of research and development indicators. The policy activities in R&D (Research & Development area are significant parts of many national programs of many EU member states. There are several reasons for governments to take active role in stimulation investment in R&D. R&D are generally considered to be the main engine of long-run economic growth. Also The European Commission pays more attention to R&D activities and provides more and more resources to these activities through Community Framework Programs. We decided to exploit multi-attribute decision-making to evaluate R&D indicators of European countries. As multi-attribute decision-making method Topsis method was applied. Topis method has provided us complete ranking of the countries taking into account indicators such as patent applications, total intramural R&D expenditure, human resources in science and technology, employment in knowledge-intensive activities and business enterprise R&D expenditure. Having these results in a hand; we proceed to making multiple selections of countries under constraints. Our main goal was to suggest an optimization model for resources distribution - subsides for R&D encouragement, i.e. to find an optimal selection of several alternatives given a set of constraints. To make a decision concerning proper countries selection we employed optimization model inspired by Promethee V, which enables us to take into account the results of previous empirical part and, at the same time, to take into account defined constraints. Formulated binary linear programming model could be useful support decision making tool in the process of resources distribution - subsides for R&D encouragement.

  5. Polymer and Concentrator Photovoltaic Technologies - Energy Return Factors and Area Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Loefgren, Birger; Gustaf Zettergren

    2006-12-20

    Market diffusion of flat plate crystalline silicon photovoltaic (PV) technology has been induced by economical support schemes and has lead to reduced cost per produced kWh electricity. For further market penetration of the PV technology, a continued reduction of production cost is required. Two alternative approaches to achieve this are using less expensive materials or changing the active materials. The technologies of concentrator PV (CPV) systems and polymer PV (PPV) devices represent these two strategies. The potential energy performance of these technologies is studied in terms of the process primary energy requirements for manufacturing, how many times this energy is paid back during its lifetime and as the required land area for electricity generation. The study is an energy analysis incorporating the inherent uncertainties in technology development. Uncertainties are identified in data acquisition, in design choices, as induced by development and improvement, in performance and by different application scenarios. The future technology alternatives are defined in different ways for CPV and PPV. CPV parameters are derived from existing products and ideas for improvements and PPV parameters from the directions of research. This study shows that the invested energy in future CPV and PPV is potentially paid back up to about 90 and 170 times, respectively, under Arizona (CPV) and average European (PPV) solar irradiation conditions. However the result is highly dependent on configuration, inventory data and device performance. Thus, for certain design alternatives, data and performance, PPV production energy is far from paid back during its lifetime. For CPV the energy return factor is decreased to about 13 in the least beneficial case. Area efficiency is studied as the land area requirements for producing a net output electricity of 1 MWh during 25 years. With device efficiencies from 1 to 5 per cent and lifetimes from 1 to 5 years a PPV device requires from 2

  6. Health-Care Waste Treatment Technology Selection Using the Interval 2-Tuple Induced TOPSIS Method

    Directory of Open Access Journals (Sweden)

    Chao Lu

    2016-06-01

    Full Text Available Health-care waste (HCW management is a major challenge for municipalities, particularly in the cities of developing nations. Selecting the best treatment technology for HCW can be regarded as a complex multi-criteria decision making (MCDM issue involving a number of alternatives and multiple evaluation criteria. In addition, decision makers tend to express their personal assessments via multi-granularity linguistic term sets because of different backgrounds and knowledge, some of which may be imprecise, uncertain and incomplete. Therefore, the main objective of this study is to propose a new hybrid decision making approach combining interval 2-tuple induced distance operators with the technique for order preference by similarity to an ideal solution (TOPSIS for tackling HCW treatment technology selection problems with linguistic information. The proposed interval 2-tuple induced TOPSIS (ITI-TOPSIS can not only model the uncertainty and diversity of the assessment information given by decision makers, but also reflect the complex attitudinal characters of decision makers and provide much more complete information for the selection of the optimum disposal alternative. Finally, an empirical example in Shanghai, China is provided to illustrate the proposed decision making method, and results show that the ITI-TOPSIS proposed in this paper can solve the problem of HCW treatment technology selection effectively.

  7. Tanks Focus Area retrieval process development and enhancements FY96 technology development summary report

    International Nuclear Information System (INIS)

    Rinker, M.W.; Bamberger, J.A.; Hatchell, B.K.

    1996-09-01

    The Retrieval Process Development and Enhancements (RPD ampersand E) activities are part of the Retrieval and Closure Program of the U.S. Department of Energy (DOE) EM-50 Tanks Focus Area. The purposes of RPD ampersand E are to understand retrieval processes, including emerging and existing technologies, and to gather data on those processes, so that end users have the requisite technical basis to make retrieval decisions. Work has been initiated to support the need for multiple retrieval technologies across the DOE complex. Technologies addressed during FY96 focused on enhancements to sluicing, borehole mining, confined sluicing retrieval end effectors, the lightweight scarifier, and pulsed air mixing. Furthermore, a decision tool and database have been initiated to link retrieval processes with tank closure to assist end users in making retrieval decisions

  8. Impact of genetically improved fish species and technology on selected hatchery and fish production in Bangladesh

    Directory of Open Access Journals (Sweden)

    MS Islam

    2017-06-01

    Full Text Available The study was carried out in IAPP commanding areas from July to September 2015. A total of 8 hatchery and 240 farmers were selected for this study from Rangpur and Barisal region. About 153% Tilapia production increased which was from 34 to 86 lakh, which was 148% in Rangpur district. Thai koi production was increased about 320% in Rangpur and it was 152% in Barisal. It was observed that, per hatchery Tilapia profit was Tk. 17.35 lakh and Tk. 17.18 lakh in Rangpur and Barisal, respectively. While, total profit was 3.9 times more for Thai koi in Rangpur and it was about 1.7 times more in Barisal after IAPP-BFRI project implementation. Impact of improved germplasm on grow out system was estimated. Finding shows that before IAPP-BFRI project the average harvesting weight of tilapia fish was 122g but after using IAPP-BFRI germplasm, it increased to 194g in Rangpur district. In case of Thai Koi, the harvesting weight gain was 26% in Rangpur district and it was statistically significant at 1% level. Survey results also show that per acre profit was only Tk.86671 for Tilapia farming before IAPP whereas it was increased to Tk. 234853 after IAPP-BFRI intervention. At the same time, profit from Thai Koi was increased about 189% after IAPPBFRI activities. Similarly, profit was increased about 86% in case of Pangus farming and this positive impact was statistically significant at 1% level. Therefore, it may conclude that, farmers can significantly increase Tilapia, Thai Koi and Pangus production as well as can maximize profit using IAPP technology.

  9. GaAs Solar Cells on V-Grooved Silicon via Selective Area Growth: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Emily L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jain, Nikhil [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Tamboli, Adele C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Vaisman, Michelle [Yale University; Li, Qiang [Hong Kong University of Science and Technology; Lau, Kei May [Hong Kong University of Science and Technology

    2017-08-31

    Interest in integrating III-Vs onto Si has recently resurged as a promising pathway towards high-efficiency, low-cost tandem photovoltaics. Here, we present a single junction GaAs solar cell grown monolithically on polished Si (001) substrates using V-grooves, selective area growth, and aspect ratio trapping to mitigate defect formation without the use of expensive, thick graded buffers. The GaAs is free of antiphase domains and maintains a relatively low TDD of 4x107 cm-2, despite the lack of a graded buffer. This 6.25 percent-efficient demonstration solar cell shows promise for further improvements to III-V/Si tandems to enable cost-competitive photovoltaics.

  10. Selective Area Sublimation: A Simple Top-down Route for GaN-Based Nanowire Fabrication.

    Science.gov (United States)

    Damilano, B; Vézian, S; Brault, J; Alloing, B; Massies, J

    2016-03-09

    Post-growth in situ partial SiNx masking of GaN-based epitaxial layers grown in a molecular beam epitaxy reactor is used to get GaN selective area sublimation (SAS) by high temperature annealing. Using this top-down approach, nanowires (NWs) with nanometer scale diameter are obtained from GaN and InxGa1-xN/GaN quantum well epitaxial structures. After GaN regrowth on InxGa1-xN/GaN NWs resulting from SAS, InxGa1-xN quantum disks (QDisks) with nanometer sizes in the three dimensions are formed. Low temperature microphotoluminescence experiments demonstrate QDisk multilines photon emission around 3 eV with individual line widths of 1-2 meV.

  11. Faint H-alpha emission objects near the equatorial selected areas

    International Nuclear Information System (INIS)

    Robertson, T.H.; Jordan, T.M.

    1989-01-01

    An objective-prism survey of fields centered on the 24 Kapteyn Selected Areas along the celestial equator has resulted in the detection of 120 faint H-alpha emission-line objects. Diffuse objects and stars having molecular bands in their spectra are not included. Only 18 of these stars were identified in previous lists of emission-line objects. Identifications were found for an additional three stars. Images of these objects appear to be stellar on direct plates. The magnitude range for these stars is V = 10.1-19.00. Positions and V magnitudes of these objects are provided, as are identifications of objects which have been reported in other lists. Frequency distributions of the apparent magnitudes and Galactic latitudes of these emission-line objects are discussed, and finding charts are provided. 14 refs

  12. Idaho National Engineering Laboratory waste area groups 1--7 and 10 Technology Logic Diagram

    International Nuclear Information System (INIS)

    O'Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Technology Logic Diagram was developed to provide technical alternatives for environmental restoration projects at the Idaho National Engineering Laboratory. The diagram (three volumes) documents suggested solutions to the characterization, retrieval, and treatment phases of cleanup activities at contaminated sites within 8 of the laboratory's 10 waste area groups. Contaminated sites at the laboratory's Naval Reactor Facility and Argonne National Laboratory-West are not included in this diagram

  13. Prospective areas in the production technology of scientific equipment for space research

    Science.gov (United States)

    Breslavets, A. V.

    1974-01-01

    The average labor of individual types of operations in the percentage ratio of the total labor consumption of manufacturing scientific instruments and apparatus for space research is presented. The prospective areas in the production technology of billet, machining, mechanical assembly, installation and assembly, adjustment and regulation and testing and control operations are noted. Basic recommendations are made with respect to further reduction of labor consumption and an increase in the productivity of labor when manufacturing scientific equipment for space research.

  14. Discovery of Potent and Selective Inhibitors for ADAMTS-4 through DNA-Encoded Library Technology (ELT).

    Science.gov (United States)

    Ding, Yun; O'Keefe, Heather; DeLorey, Jennifer L; Israel, David I; Messer, Jeffrey A; Chiu, Cynthia H; Skinner, Steven R; Matico, Rosalie E; Murray-Thompson, Monique F; Li, Fan; Clark, Matthew A; Cuozzo, John W; Arico-Muendel, Christopher; Morgan, Barry A

    2015-08-13

    The aggrecan degrading metalloprotease ADAMTS-4 has been identified as a novel therapeutic target for osteoarthritis. Here, we use DNA-encoded Library Technology (ELT) to identify novel ADAMTS-4 inhibitors from a DNA-encoded triazine library by affinity selection. Structure-activity relationship studies based on the selection information led to the identification of potent and highly selective inhibitors. For example, 4-(((4-(6,7-dimethoxy-3,4-dihydroisoquinolin-2(1H)-yl)-6-(((4-methylpiperazin-1-yl)methyl)amino)-1,3,5-triazin-2-yl)amino)methyl)-N-ethyl-N-(m-tolyl)benzamide has IC50 of 10 nM against ADAMTS-4, with >1000-fold selectivity over ADAMT-5, MMP-13, TACE, and ADAMTS-13. These inhibitors have no obvious zinc ligand functionality.

  15. Raised bed technology for wheat crop in irrigated areas of punjab, pakistan

    International Nuclear Information System (INIS)

    Taj, S.; Ali, A.; Akmal, N.; Yaqoob, S.; Ali, M.

    2013-01-01

    The present paper analyzes the determinants of adoption of raised bed planting of wheat in irrigated areas of Punjab, Pakistan. Wheat is an important staple food of Pakistan. It contributes 13 % to the value added in agriculture and 2.6 % to the GDP. The agrarian economy of Pakistan is continuously under stress due to the low yield of almost all the crops and constrained with many problem. One of the most important issues of agriculture is water shortage which is increasing day by day and is a major challenge now a days. Therefore, water saving becomes the utmost need of the hour. The national research system is now putting their focus and efforts to manage the precious water through various modern/latest water saving models to draw some solid method of irrigation with less wastage. Raised bed planting method is also one of the modern methods of planting crop with significant water saving. The study was planned and conducted by the Social Sciences Research Institute, Faisalabad in 2011-12 to assess the determinants of the adoption of the raised bed technology for wheat crop in irrigated Punjab, Pakistan. The study was conducted at three sites of the districts Faisalabad and Toba Tek Singh where the Water Management Research Institute, University of Faisalabad promoted the raised bed technology for wheat crop. A sample of 63 farmers was interviewed in detail to understand the whole system and the factors contributing to the adoption of the technology. The study revealed that adopters typically have a more favorable resource base and tend to variously outperform non-adopters. More access to education and other social indicators increases the chances to adopt new technologies by the farming community. However, the small farmers can also be benefited with the technology with proper education regarding the technology in the area with good social mobilization for the conservation of scarce and valuable farm resources. (author)

  16. Selection of Sustainable Technology for VOC Abatement in an Industry: An Integrated AHP-QFD Approach

    Science.gov (United States)

    Gupta, Alok Kumar; Modi, Bharat A.

    2018-04-01

    Volatile organic compounds (VOCs) are universally present in global atmospheric pollutants. These VOCs are responsible for photo chemical reaction in atmosphere leading to serious harmful effects on human health and environment. VOCs are produced from both natural and man-made sources and may have good commercial value if it can be utilized as alternate fuel. As per data from US EPA, 15% of total VOC emissions are generated from surface coating industry but VOC concentration and exhaust air volume varies to a great extent and is dependent on processes used by industry. Various technologies are available for abatement of VOCs. Physical, Chemical and Biological technologies are available to remove VOCs by either recovery or destruction with many advantages and limitations. With growing environmental awareness and considering the resource limitations of medium and small scale industries, requirement of a tool for selecting appropriate techno economically viable solution for removal of VOCs from industrial process exhaust is envisaged. The aim of the present study is to provide management a tool to determine the overall effect of implementation of VOC abatement technology on business performance and VOC emissions. The primary purpose of this work is to outline a methodology to rate various VOC abatement technologies with respect to the constraint of meeting current and foreseeable future regulatory requirements, operational flexibility and Over All Economics Parameters considering conservation of energy. In this paper an integrated approach has been proposed to select most appropriate abatement technology strategically. Analytical hierarchy process and Quality function deployment have been integrated for Techno-commercial evaluation. A case study on selection of VOC abatement technology for a leading aluminium foil surface coating, lamination and printing facility using this methodology is presented in this study.

  17. Miniaturized, Planar Ion-selective Electrodes Fabricated by Means of Thick-film Technology

    Directory of Open Access Journals (Sweden)

    Robert Koncki

    2006-04-01

    Full Text Available Various planar technologies are employed for developing solid-state sensorshaving low cost, small size and high reproducibility; thin- and thick-film technologies aremost suitable for such productions. Screen-printing is especially suitable due to itssimplicity, low-cost, high reproducibility and efficiency in large-scale production. Thistechnology enables the deposition of a thick layer and allows precise pattern control.Moreover, this is a highly economic technology, saving large amounts of the used inks. Inthe course of repetitions of the film-deposition procedure there is no waste of material dueto additivity of this thick-film technology. Finally, the thick films can be easily and quicklydeposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodesbased on ionophores as well as crystalline ion-selective materials dedicated forpotentiometric measurements are demonstrated. Analytical parameters of these sensors arecomparable with those reported for conventional potentiometric electrodes. All mentionedthick-film strip electrodes have been totally fabricated in only one, fully automated thick-film technology, without any additional manual, chemical or electrochemical steps. In allcases simple, inexpensive, commercially available materials, i.e. flexible, plastic substratesand easily cured polymer-based pastes were used.

  18. Particular Results of a Research Aimed at Curricula Design of Teacher Training in the Area of Didactic Technological Competences

    Directory of Open Access Journals (Sweden)

    Ján Záhorec

    2018-06-01

    Full Text Available The paper presents particular results of the first phase of a research aimed at improving pre-graduate teacher training in the area of didactic technological competences. The main goal of the prepared research is to modernize and optimize relevant parts of study programs of teacher trainees at Slovak higher education institutions (inclusion and structure the relevant subjects in the study programs, their content and time assignment. The results are related to a questionnaire survey of the current state and perspectives of the continuing professional development of primary and secondary school teachers contributing to their didactic technological competences improvement and development. Main attention is paid to an analysis of the selected questionnaire items in which the respondents assessed significance of the use of various interactive educational activities and digital means in teaching process to inrease efficiency of selected specific aspects of education. The presented analysis is based on the segmentation of the respondents on the factor of the category and sub-category of the teaching staff the respondents belong to.

  19. Linguistic processing in visual and modality-nonspecific brain areas: PET recordings during selective attention.

    Science.gov (United States)

    Vorobyev, Victor A; Alho, Kimmo; Medvedev, Svyatoslav V; Pakhomov, Sergey V; Roudas, Marina S; Rutkovskaya, Julia M; Tervaniemi, Mari; Van Zuijen, Titia L; Näätänen, Risto

    2004-07-01

    Positron emission tomography (PET) was used to investigate the neural basis of selective processing of linguistic material during concurrent presentation of multiple stimulus streams ("cocktail-party effect"). Fifteen healthy right-handed adult males were to attend to one of three simultaneously presented messages: one presented visually, one to the left ear, and one to the right ear. During the control condition, subjects attended to visually presented consonant letter strings and ignored auditory messages. This paper reports the modality-nonspecific language processing and visual word-form processing, whereas the auditory attention effects have been reported elsewhere [Cogn. Brain Res. 17 (2003) 201]. The left-hemisphere areas activated by both the selective processing of text and speech were as follows: the inferior prefrontal (Brodmann's area, BA 45, 47), anterior temporal (BA 38), posterior insular (BA 13), inferior (BA 20) and middle temporal (BA 21), occipital (BA 18/30) cortices, the caudate nucleus, and the amygdala. In addition, bilateral activations were observed in the medial occipito-temporal cortex and the cerebellum. Decreases of activation during both text and speech processing were found in the parietal (BA 7, 40), frontal (BA 6, 8, 44) and occipito-temporal (BA 37) regions of the right hemisphere. Furthermore, the present data suggest that the left occipito-temporal cortex (BA 18, 20, 37, 21) can be subdivided into three functionally distinct regions in the posterior-anterior direction on the basis of their activation during attentive processing of sublexical orthography, visual word form, and supramodal higher-level aspects of language.

  20. Medical education for rural areas: Opportunities and challenges for information and communications technologies

    Directory of Open Access Journals (Sweden)

    Sargeant Joan

    2005-01-01

    Full Text Available Resources in medical education are not evenly distributed and access to education can be more problematic in rural areas. Similar to telemedicine′s positive influence on health care access, advances in information and communications technologies (ICTs increase opportunities for medical education. This paper provides a descriptive overview of the use of ICTs in medical education and suggests a conceptual model for reviewing ICT use in medical education, describes specific ICTs and educational interventions, and discusses opportunities and challenges of ICT use, especially in rural areas. The literature review included technology and medical education, 1996-2005. Using an educational model as a framework, the uses of ICTs in medical education are, very generally, to link learners, instructors, specific course materials and/or information resources in various ways. ICTs range from the simple (telephone, audio-conferencing to the sophisticated (virtual environments, learning repositories and can increase access to medical education and enhance learning and collaboration for learners at all levels and for institutions. While ICTs are being used and offer further potential for medical education enhancement, challenges exist, especially for rural areas. These are technological (e.g., overcoming barriers like cost, maintenance, access to telecommunications infrastructure, educational (using ICTs to best meet learners′ educational priorities, integrating ICTs into educational programs and social (sensitivity to remote needs, resources, cultures. Finally, there is need for more rigorous research to more clearly identify advantages and disadvantages of specific uses of ICTs in medical education.

  1. Geological Consideration for the Site Selection of Radioactive Waste at the PPTN Serpong Area

    International Nuclear Information System (INIS)

    Sucipta

    2002-01-01

    Geological consideration is a main aspect in the exploration or selection of site for radioactive waste repository, because, really that repository site must be surrounded by geological system (geosphere). The objective of the site selection is to obtain a site which geologically capable to prevent the escape of waste pollution from repository to biosphere. Beside that the site must be free from geological processes which harmfull to longterm stability of the site. Descriptive analysis method was applied in this research and combined with evaluation by scoring methods. From the analysis result could be identified that PPTN Serpong morphologically consist of undulatory plains (elevation 80-100 m above msl), the lithology are alluvial deposits. Quarternary tuffs, pumiceous tuffs, clayey tuffs. sandy tuffs and limestone. The geological structure was supposed a horst and graben which buried more than 15 m since Pleistocene. Hydrological condition are moderately run-off, and the distance to the river is about 160 m. The depth of groundwater is 8.3 m, with parallel drainage system. Geological resources found in the site are land and groundwater. The most potential of geological hazard is supposed a rock mass movement. By the land evaluation could be concluded that PPTN Serpong area have moderate suitability for NSD site. (author)

  2. Analysis of heat source selection for residential buildings in rural areas

    Directory of Open Access Journals (Sweden)

    Szul Tomasz

    2018-01-01

    Full Text Available The research aiming to check whether the output of currently installed boilers matches the use requirements together with estimation of their energy efficiency was carried out on a group of 84 single-family residential buildings located in rural areas. Heating and hot water energy needs were calculated for each building in order to determine the use requirements. This enabled verification whether the currently installed boilers match the actual use requirements in the buildings. Based on the calculations it was determined that the designed average boiler output in the group of buildings subject to analysis is 15.7 kW, whereas the mean rated output capacity of boilers installed therein is 25.4 kW. On average, the output capacity of the installed boilers exceeds the use requirements for the buildings by 60%. To calculate the energy efficiency of boilers, the mean annual boiler output capacity use coefficient was determined. For boilers selected on the basis of standard calculations, the mean coefficient is 0.47. For boilers currently in use it is 0.31, less than the above figure. The above calculations show that if boilers were correctly selected in compliance to the building needs, then the average estimated seasonal efficiency of 65% would be feasible. However, in the current state the achievable efficiency is approx. 55%.

  3. Social determinants of health in selected slum areas in Jordan: challenges and policy directions.

    Science.gov (United States)

    Ajlouni, Musa T

    2016-01-01

    The unplanned urbanization in Jordan has over time created many informal settlements "slums" around big cities as Amman, Zerka and Aqaba. The purpose of this study was to highlight the most common challenges related to social determinants of health in two selected slum areas in Amman and Aqaba and suggest policy directions and interventions to meet these challenges. In addition to a prestructured interview with all household heads living in the two slum sites, focus group meetings with a purposefully selected sample of 12 slum dwellers in each site were used to assess the structural and intermediary determinants of health as perceived by slum residents in the two study locations. The study found that slum residents in the two locations suffer from many challenges as severe poverty; unemployment; illiteracy and low education attainments; gender discrimination; insufficient and poor diet; social and official exclusion; unhealthy environment; lack of water supply, electricity and basic sanitation facilities; high prevalence of diseases; and insufficient and inappropriate health services. Specific policy directions to meet these challenges were recommended and grouped into three main clusters: social protection, social inclusion and empowerment. New plans and tools should be developed by local authorities in Jordan to understand, protect, include and empower those vulnerable people who are forced to live in these unhealthy and inhuman environments. Copyright © 2014 John Wiley & Sons, Ltd.

  4. Selective-area growth and controlled substrate coupling of transition metal dichalcogenides

    Science.gov (United States)

    Bersch, Brian M.; Eichfeld, Sarah M.; Lin, Yu-Chuan; Zhang, Kehao; Bhimanapati, Ganesh R.; Piasecki, Aleksander F.; Labella, Michael, III; Robinson, Joshua A.

    2017-06-01

    Developing a means for true bottom-up, selective-area growth of two-dimensional (2D) materials on device-ready substrates will enable synthesis in regions only where they are needed. Here, we demonstrate seed-free, site-specific nucleation of transition metal dichalcogenides (TMDs) with precise control over lateral growth by utilizing an ultra-thin polymeric surface functionalization capable of precluding nucleation and growth. This polymer functional layer (PFL) is derived from conventional photoresists and lithographic processing, and is compatible with multiple growth techniques, precursors (metal organics, solid-source) and TMDs. Additionally, we demonstrate that the substrate can play a major role in TMD transport properties. With proper TMD/substrate decoupling, top-gated field-effect transistors (FETs) fabricated with selectively-grown monolayer MoS2 channels are competitive with current reported MoS2 FETs. The work presented here demonstrates that substrate surface engineering is key to realizing precisely located and geometrically-defined 2D layers via unseeded chemical vapor deposition techniques.

  5. Characteristics of selected elements of the air quality management system in urban areas in Poland

    Science.gov (United States)

    Sówka, Izabela; Kobus, Dominik; Chlebowska Styś, Anna; Zathey, Maciej

    2017-11-01

    Most of Europeans living in cities are exposed to concentrations of air pollutants in excess of the thresholds given in the WHO guidelines and EU legislation. Due to this fact, for the urban air quality systems, the mechanisms of proper information and warning of the inhabitants as well as legal, economic and spatial planning instruments should be improved. The analysis of Polish air quality management system and its' selected components (exemplary measures, information-spreading methods, spatial planning instruments) in four selected Polish cities (Wroclaw, Warsaw, Poznan and Cracow) indicated the need to develop effective solutions, among others, in terms of: emission requirements for combustion of fuels of power of up to 1 MW; admission of high emission fuels on the market; legal and coordination issues at the level of implementation of the area development policy and coordination of activities covering issues within the scope of the structure of planning documents including mainly: ambient air protection programs, spatial developments plans in communes and voivodeships, low emission economy plans, plans of sustainable development of public transport, plans of providing heat, electric power and gas fuels to communes, acts of regional parliaments, introducing limitations based on the Environmental Protection Act and strategies of voivodeship.

  6. Area-selective atomic layer deposition of platinum using photosensitive polyimide.

    Science.gov (United States)

    Vervuurt, René H J; Sharma, Akhil; Jiao, Yuqing; Kessels, Wilhelmus Erwin M M; Bol, Ageeth A

    2016-10-07

    Area-selective atomic layer deposition (AS-ALD) of platinum (Pt) was studied using photosensitive polyimide as a masking layer. The polyimide films were prepared by spin-coating and patterned using photolithography. AS-ALD of Pt using poly(methyl-methacrylate) (PMMA) masking layers was used as a reference. The results show that polyimide has excellent selectivity towards the Pt deposition, after 1000 ALD cycles less than a monolayer of Pt is deposited on the polyimide surface. The polyimide film could easily be removed after ALD using a hydrogen plasma, due to a combination of weakening of the polyimide resist during Pt ALD and the catalytic activity of Pt traces on the polyimide surface. Compared to PMMA for AS-ALD of Pt, polyimide has better temperature stability. This resulted in an improved uniformity of the Pt deposits and superior definition of the Pt patterns. In addition, due to the absence of reflow contamination using polyimide the nucleation phase during Pt ALD is drastically shortened. Pt patterns down to 3.5 μm were created with polyimide, a factor of ten smaller than what is possible using PMMA, at the typical Pt ALD processing temperature of 300 °C. Initial experiments indicate that after further optimization of the polyimide process Pt features down to 100 nm should be possible, which makes AS-ALD of Pt using photosensitive polyimide a promising candidate for patterning at the nanoscale.

  7. Pasture species selection for revegetation of open-cut coal mine areas in central Queensland, Australia

    International Nuclear Information System (INIS)

    Naidu, B.P.; Harwood, M.R.; Hacker, J.B.; Thumma, B.R.; Mott, J.J.

    1997-01-01

    This paper outlines a successful approach that was followed to evaluate grass and legume accessions for revegetation of low fertility and saline coal mine spoils. At the first stage, using seed collection records (passport data) of the Australian Tropical Forages Genetic Resource Centre, a range of grasses and legumes adapted to low rainfall, clay soils and saline areas were selected. At the second stage, legume seed was germinated in NaCl solutions of 0 to 0.2 M and salinity tolerance was assessed based on germination percentage and seedling vigour. At the third stage, germination of legumes was assessed in pots filled with mine top-soil and spoils to be revegetated. Grasses were not included in stages 2 and 3 as adequate passport data was available to select a range of accession for the 4th stage. The fourth stage of evaluation comprised field trails of 10 grass and 10 legume accessions, on two top-soils and two spoils. A stoloniferous from of Urochloa mosamblicensis was the most promising grass providing up to 20% of ground cover 12 months after establishment. Legumes surviving at the end of the first season were Desmanthus subulatus, D. virgatus and Neptunia dimorphantha on top-soil and Clitoria ternatea, Leucaena leucocephala, and Rhynchosia sublobata on the spoil. Depending on long term survival, grass and legume accessions will be released as cultivars for minesite revegetation purposes. 14 refs., 4 figs., 3 tabs

  8. Integrated GIS-Based Site Selection of Hillside Development for Future Growth of Urban Areas

    Directory of Open Access Journals (Sweden)

    Imtiaz Ahmed Chandio

    2016-04-01

    Full Text Available Urbanization is a challenging issue for developing countries, like Malaysia. Penang Island is one of the states of Malaysia selected as a study area where limited flat land exists. As a result, this would create urban environmental problems, such as unstable slopes and landslides due to uneven topography. The purpose of this study was to develop land suitability model for hillside development. Hence, this research aims land suitability analysis modelling for hillside development by using integrated GIS (Geographic Information System based MCDM (Multi-Criteria Decision Making approach. The hill land portion of Penang Island was selected for hillside site development using GIS and AHP (Analytic Hierarchy Process as a MCDM method for sustainable hillside development. This study found that 15% of land was highly suitable, 27% moderately suitable, 41% less suitable, and 17% not suitable. Therefore, this research can be consistently used by the concerned authorities for sustainable hillside urban planning and development. This approach can be used as a policy tool in decision making of urban planning and development.

  9. Keystone Species, Forest and Landscape: A Model to Select Protected Areas

    Science.gov (United States)

    Lins, Daniela Barbosa da Silva; Gardon, Fernando Ravanini; Meyer, João Frederico da Costa Azevedo; Santos, Rozely Ferreira dos

    2017-06-01

    The selection of forest fragments for conservation is usually based on spatial parameters as forest size and canopy integrity. This strategy assumes that chosen fragments present high conservation status, ensuring biodiversity and ecological functions. We argue that a well-preserved forest fragment that remains connected by the landscape structure, does not necessarily hold attributes that ensure the presence of keystone species. We also discuss that the presence of keystone species does not always mean that it has the best conditions for its occurrence and maintenance. We developed a model to select areas in forest landscapes to be prioritized for protection based on suitability curves that unify and compare spatial indicators of three categories: forest fragment quality, landscape quality, and environmental conditions for the occurrence of a keystone species. We use a case study to compare different suitability degrees for Euterpe edulis presence, considered an important functional element in Atlantic Forest (São Paulo, Brazil) landscapes and a forest resource for local people. The results show that the identification of medium or advanced stage fragments as singular indicator of forest quality does not guarantee the existence or maintenance of this keystone species. Even in some well-preserved forest fragments, connected to others and with palm presence, the reverse J-shaped distribution of the population size structure is not sustained and these forests continue to be threatened due to human disturbances.

  10. Simulation technologies in networking and communications selecting the best tool for the test

    CERN Document Server

    Pathan, Al-Sakib Khan; Khan, Shafiullah

    2014-01-01

    Simulation is a widely used mechanism for validating the theoretical models of networking and communication systems. Although the claims made based on simulations are considered to be reliable, how reliable they really are is best determined with real-world implementation trials.Simulation Technologies in Networking and Communications: Selecting the Best Tool for the Test addresses the spectrum of issues regarding the different mechanisms related to simulation technologies in networking and communications fields. Focusing on the practice of simulation testing instead of the theory, it presents

  11. The Application Study in Solar Energy Technology for Highway Service Area: A Case Study of West Lushan Highway Low-Carbon Service Area in China

    Directory of Open Access Journals (Sweden)

    Xiaochun Qin

    2015-01-01

    Full Text Available A lot of research works have been made concerning highway service area or solar technology and acquired great achievements. However, unfortunately, few works have been made combining the two topics together of highway service areas and solar energy saving to make a systemic research on solar technology application for highway service area. In this paper, taking West Lushan highway low-carbon service area in Jiangxi Province of China as the case study, the advantages, technical principles, and application methods of solar energy technology for highway service area including solar photoelectric technology and solar water heating technology were discussed based on the analysis of characteristics of highway low-carbon service area; the system types, operation mode, and installing tilt angle of the two kinds of solar systems suitable for highway service areas were confirmed. It was proved that the reduction of the cost by electricity savings of solar system was huge. Taking the investment of the solar systems into account, the payback period of solar photoelectric systems and solar water heating systems was calculated. The economic effect of the solar systems in West Lushan highway service area during the effective operation periods was also calculated and proved very considerable.

  12. Composition of Anopheles Species Collected from Selected Malarious Areas of Afghanistan and Iran

    Directory of Open Access Journals (Sweden)

    Helen Hoosh-Deghati

    2017-10-01

    Full Text Available Background: Malarious areas in Iran are close to Afghanistan and Pakistan that urge the researchers to extend their knowledge on malaria epidemiology to the neighboring countries as well. Vectorial capacity differs at species or even at population level, the first essential step is accurate identification of vectors. This study aimed to identify Anopheles species composition in selected malarious areas of Afghanistan and Iran, providing further applied data for other research in two countries.Methods: Adults Anopheles spp. were collected from four provinces in Afghanistan (Badakhshan, Herat, Kunduz, Nangarhar by pyrethrum spray catch, hand collection methods through WHO/EMRO coordination and from Chaba­har County in Iran by pyrethrum spray catch method. Identification was performed using reliable identification key.Results: Totally, 800 female Anopheles mosquitos, 400 from each country were identified at species level. Anophe­les composition in Afghanistan was An. superpictus, An. stephensi and An. hyrcanus. Most prevalent species in Ba­dakhshan and Kunduz were An. superpictus, whereas An. stephensi and An. hyrcanus were respectively found in Nangarhar and Heart. Anopheles species in Chabahar County of Iran were An. stephensi, An. fluviatilis, An. culicifa­cies and An. sergentii. The most prevalent species was An. stephensi.Conclusion: Current study provides a basis for future research such as detection of Plasmodium infection in col­lected samples which is on process by the authors, also for effective implementation of evidence-based malaria vec­tor intervention strategies.

  13. Assessment and selection of geomorphosites and trails in the Miage Glacier area (Western Italian alps).

    Science.gov (United States)

    Bollati, Irene; Smiraglia, Claudio; Pelfini, Manuela

    2013-04-01

    Glacial environments are considered geomorphosites because they exhibit all of the features that characterise sites of geomorphological interest. The Miage Glacier, in particular, is the most important debris-covered glacier of the Italian Alps, and it has been extensively studied since the 18th century because of its scientific features. In this area, the geomorphological and geological attributes are evaluated at 11 sites that have been individuated along the three main touristic trails, which allow an exploration of the surroundings of the glacial tongue and its two main lobes. Using a methodology previously tested in a fluvial environment, single sites and trails are quantitatively assessed to determine the most suitable trail for educational purposes. Hazards that could potentially affect the trails are considered in terms of both risk education and final selection of the most suitable trails for the various possible user groups. The richness of scientific data in this area should increase its importance as a geomorphosite by increasing the educational value of the Miage Glacier and the Veny Valley.

  14. Technology and entrepreneurial orientation at the organisational level in the Johannesburg area

    Directory of Open Access Journals (Sweden)

    Boris Urban

    2010-05-01

    Research purpose: This study examines entrepreneurship and its relation with technology, which is often conceptualised as entrepreneurial orientation (EO and technology orientation (TO. The study is further contextualised by measuring environmental dynamism and hostility. Motivation for the study: Despite the weight of positive empirical findings and observations that EO and TO are strategic imperatives, there is a danger that firms in Africa are lagging behind and subsequently a study of this nature aids in understanding these imperatives. Research design, approach and method: A survey is used to collect data from a population of diverse businesses in the Johannesburg area (n = 1600, yielding a sample of 236 firms. Instruments were subjected to principal component factor analysis and descriptive statistics were calculated. The hypotheses were tested using correlational analysis, with their significance reported in terms of Pearson correlation coefficients. Main finding: Findings reveal significant correlations between EO and environment hostility and dynamism, but not between EO and TO. Practical and managerial implications: The study offers some solutions towards understanding how TO and EO may promote firm innovation, which encourages the diffusion, adoption and application of the very latest technologies. This is particularly relevant in cases where a lot of potential exists in developing countries to ‘import and adapt’ technologies developed in industrialised countries. Contribution of study: Research on firm innovation in the African context may be considered valuable, as very few empirical studies that have been conducted previously focus on innovation and technology in the context of an emerging country.

  15. Behavioral Risk Factors: Selected Metropolitan Area Risk Trends (SMART) MMSA Age-adjusted Prevalence Data (2011 to Present)

    Data.gov (United States)

    U.S. Department of Health & Human Services — 2011 to present. BRFSS SMART MMSA age-adjusted prevalence combined land line and cell phone data. The Selected Metropolitan Area Risk Trends (SMART) project uses the...

  16. Mixed Waste Focus Area alternative oxidation technologies development and demonstration program

    International Nuclear Information System (INIS)

    Borduin, L.C.; Fewell, T.; Gombert, D.; Priebe, S.

    1998-01-01

    The Mixed Waste Focus Area (MWFA) is currently supporting the development and demonstration of several alternative oxidation technology (AOT) processes for treatment of combustible mixed low-level wastes. The impetus for this support derives from regulatory and political hurdles frequently encountered by traditional thermal techniques, primarily incinerators. AOTs have been defined as technologies that destroy organic material without using open-flame reactions. Whether thermal or nonthermal, the processes have the potential advantages of relatively low-volume gaseous emissions, generation of few or no dioxin/furan compounds, and operation at low enough temperatures that metals (except mercury) and most radionuclides are not volatilized. Technology development and demonstration are needed to confirm and realize the potential of AOTs and to compare them on an equal basis with their fully demonstrated thermal counterparts. AOTs include both thermal and nonthermal processes that oxidize organic wastes but operate under significantly different physical and chemical conditions than incinerators. Nonthermal processes currently being studied include Delphi DETOX and acid digestion at the Savannah River Site, and direct chemical oxidation at Lawrence Livermore National Laboratory. All three technologies are at advanced stages of development or are entering the demonstration phase. Nonflame thermal processes include catalytic chemical oxidation, which is being developed and deployed at Lawrence Berkeley National Laboratory, and team reforming, a commercial process being supported by Department of Energy. Related technologies include two low-flow, secondary oxidation processes (Phoenix and Thermatrix units) that have been tested at MSE, Inc., in Butte, Montana. Although testing is complete on some AOT technologies, most require additional support to complete some or all of the identified development objectives. Brief descriptions, status, and planned paths forward for each

  17. Effects of basal area on survival and growth of longleaf pine when practicing selection silviculture

    International Nuclear Information System (INIS)

    Kara, F.; Loewenstein, E.F.; Brockway, D.G.

    2017-01-01

    Aim of study: Uneven-aged (UEA) management systems can achieve multiple-use objectives, however, use of UEA techniques to manage longleaf pine (Pinus palustris Mill.) forests are still open to question, because of the species’ intolerance of competition. It was our aim to examine the influence of different levels (9.2, 13.8 and 18.4 m2 ha-1) of residual basal area (RBA) on longleaf pine seedling survival and growth following three growing seasons. Area of study: This study was conducted at the Escambia Experimental Forest, located on the Southern Coastal Plain of Alabama, in the southeastern United States. Material and Methods: Selection silviculture was implemented with the Proportional-Basal Area (Pro-B) method. Prescribed burning was conducted before seed dispersal and in the second year after germination. Photosynthetically active radiation (PAR) was measured under the canopy in the study plots. Survival and growth of longleaf pine seedlings were observed for three growing seasons. Main results: An inverse relationship was found between the number of germinants and RBA, but the mortality of germinants and planted seedlings was not affected by RBA. At age three, an inverse relationship was observed between root-collar diameter (RCD) growth of the germinants and RBA, but RCD growth of planted seedlings was not affected by RBA. Most of the study plots contained more than the projected number of seedlings needed to sustain the target diameter structure. Research highlights: Long-term continuous monitoring of seedling development and recruitment into canopy is required to determine the efficacy of UEA management. However, current data suggest that UEA methods may be a viable alternative to the use of even-aged (EA) methods in longleaf ecosystems.

  18. Effects of basal area on survival and growth of longleaf pine when practicing selection silviculture

    Energy Technology Data Exchange (ETDEWEB)

    Kara, F.; Loewenstein, E.F.; Brockway, D.G.

    2017-11-01

    Aim of study: Uneven-aged (UEA) management systems can achieve multiple-use objectives, however, use of UEA techniques to manage longleaf pine (Pinus palustris Mill.) forests are still open to question, because of the species’ intolerance of competition. It was our aim to examine the influence of different levels (9.2, 13.8 and 18.4 m2 ha-1) of residual basal area (RBA) on longleaf pine seedling survival and growth following three growing seasons. Area of study: This study was conducted at the Escambia Experimental Forest, located on the Southern Coastal Plain of Alabama, in the southeastern United States. Material and Methods: Selection silviculture was implemented with the Proportional-Basal Area (Pro-B) method. Prescribed burning was conducted before seed dispersal and in the second year after germination. Photosynthetically active radiation (PAR) was measured under the canopy in the study plots. Survival and growth of longleaf pine seedlings were observed for three growing seasons. Main results: An inverse relationship was found between the number of germinants and RBA, but the mortality of germinants and planted seedlings was not affected by RBA. At age three, an inverse relationship was observed between root-collar diameter (RCD) growth of the germinants and RBA, but RCD growth of planted seedlings was not affected by RBA. Most of the study plots contained more than the projected number of seedlings needed to sustain the target diameter structure. Research highlights: Long-term continuous monitoring of seedling development and recruitment into canopy is required to determine the efficacy of UEA management. However, current data suggest that UEA methods may be a viable alternative to the use of even-aged (EA) methods in longleaf ecosystems.

  19. Decision support tool for used oil regeneration technologies assessment and selection.

    Science.gov (United States)

    Khelifi, Olfa; Dalla Giovanna, Fabio; Vranes, Sanja; Lodolo, Andrea; Miertus, Stanislav

    2006-09-01

    Regeneration is the most efficient way of managing used oil. It saves money by preventing costly cleanups and liabilities that are associated with mismanagement of used oil, it helps to protect the environment and it produces a technically renewable resource by enabling an indefinite recycling potential. There are a variety of processes and licensors currently offering ways to deal with used oils. Selecting a regeneration technology for used oil involves "cross-matching" key criteria. Therefore, the first prototype of spent oil regeneration (SPORE), a decision support tool, has been developed to help decision-makers to assess the available technologies and select the preferred used oil regeneration options. The analysis is based on technical, economical and environmental criteria. These criteria are ranked to determine their relative importance for a particular used oil regeneration project. The multi-criteria decision analysis (MCDA) is the core of the SPORE using the PROMETHEE II algorithm.

  20. Verification of best available technology for the 300 Area Treated Effluent Disposal Facility (310 Facility)

    International Nuclear Information System (INIS)

    Wagner, R.N.

    1994-01-01

    This compilation of Project L-045H reference materials documents that the 300 Area Treated Effluent Disposal Facility (TEDF, also designated the 310 Facility) was designed, built, and will be operated in accordance with the best available technology (BAT) identified in the Engineering Summary Report. The facility is intended for treatment of 300 Area process sewer wastewater. The following unit operations for 300 Area process sewer water treatment are specified as: influent receipt; iron co-precipitation and sludge handling for removal of heavy metals and initial suspended solids; ion exchanged for removal of mercury and other heavy metals; ultraviolet (UV)/peroxide treatment for destruction of organic compounds, cyanide, coliforms, sulfide, and nitrite; and effluent discharge to the Columbia River with pH monitoring/control capability

  1. The regional electricity generation mix in Scotland: A portfolio selection approach incorporating marine technologies

    International Nuclear Information System (INIS)

    Allan, Grant; Eromenko, Igor; McGregor, Peter; Swales, Kim

    2011-01-01

    Standalone levelised cost assessments of electricity supply options miss an important contribution that renewable and non-fossil fuel technologies can make to the electricity portfolio: that of reducing the variability of electricity costs, and their potentially damaging impact upon economic activity. Portfolio theory applications to the electricity generation mix have shown that renewable technologies, their costs being largely uncorrelated with non-renewable technologies, can offer such benefits. We look at the existing Scottish generation mix and examine drivers of changes out to 2020. We assess recent scenarios for the Scottish generation mix in 2020 against mean-variance efficient portfolios of electricity-generating technologies. Each of the scenarios studied implies a portfolio cost of electricity that is between 22% and 38% higher than the portfolio cost of electricity in 2007. These scenarios prove to be mean-variance 'inefficient' in the sense that, for example, lower variance portfolios can be obtained without increasing portfolio costs, typically by expanding the share of renewables. As part of extensive sensitivity analysis, we find that Wave and Tidal technologies can contribute to lower risk electricity portfolios, while not increasing portfolio cost. - Research Highlights: → Portfolio analysis of scenarios for Scotland's electricity generating mix in 2020. → Reveals potential inefficiencies of selecting mixes based on levelised cost alone. → Portfolio risk-reducing contribution of Wave and Tidal technologies assessed.

  2. Recycling and social technologies for sustainability: The Brazilian experience of wastepickers' inclusion in selective collection programs.

    Science.gov (United States)

    Lima, Francisco de Paula Antunes; de Oliveira, Fabiana Goulart

    2017-01-01

    Alternatives are being developed for waste treatment all over the world. Solidary selective collection is a recognized social technology for taking millions of people out of absolute poverty. However, this technology raises crucial questions regarding its nature and development perspective. What can be said of the legitimacy of a social technology that is born from misery and maintains wastepickers in precarious work conditions? This article approaches issues based on the analysis of the wastepickers' work process, highlighting the difficulties and interpersonal conflicts, the strong social bonds and creativity that reveal the potential of efficiency and solidarity of this social technology. The analyses are founded on empirical descriptions of work situations and organizational arrangements that the wastepickers themselves have developed. The observations were made during the work, followed by interviews focused on significant events and behaviors. The contradiction between efficiency and solidarity, which excludes workers from the formal labor market, finds in the associations a solution for people with different capacities. This social technology offers much more than simple survival or exoticism. The wastepickers create a sustainable mode of production, putting together economic, social and environmental criteria in an innovative and fair production technology.

  3. The regional electricity generation mix in Scotland: A portfolio selection approach incorporating marine technologies

    Energy Technology Data Exchange (ETDEWEB)

    Allan, Grant, E-mail: grant.j.allan@strath.ac.u [Fraser of Allander Institute, Department of Economics, University of Strathclyde, Sir William Duncan Building, 130 Rottenrow, Glasgow G4 0GE (United Kingdom); Eromenko, Igor; McGregor, Peter [Fraser of Allander Institute, Department of Economics, University of Strathclyde, Sir William Duncan Building, 130 Rottenrow, Glasgow G4 0GE (United Kingdom); Swales, Kim [Department of Economics, University of Strathclyde, Sir William Duncan Building, 130 Rottenrow, Glasgow G4 0GE (United Kingdom)

    2011-01-15

    Standalone levelised cost assessments of electricity supply options miss an important contribution that renewable and non-fossil fuel technologies can make to the electricity portfolio: that of reducing the variability of electricity costs, and their potentially damaging impact upon economic activity. Portfolio theory applications to the electricity generation mix have shown that renewable technologies, their costs being largely uncorrelated with non-renewable technologies, can offer such benefits. We look at the existing Scottish generation mix and examine drivers of changes out to 2020. We assess recent scenarios for the Scottish generation mix in 2020 against mean-variance efficient portfolios of electricity-generating technologies. Each of the scenarios studied implies a portfolio cost of electricity that is between 22% and 38% higher than the portfolio cost of electricity in 2007. These scenarios prove to be mean-variance 'inefficient' in the sense that, for example, lower variance portfolios can be obtained without increasing portfolio costs, typically by expanding the share of renewables. As part of extensive sensitivity analysis, we find that Wave and Tidal technologies can contribute to lower risk electricity portfolios, while not increasing portfolio cost. - Research Highlights: {yields} Portfolio analysis of scenarios for Scotland's electricity generating mix in 2020. {yields} Reveals potential inefficiencies of selecting mixes based on levelised cost alone. {yields} Portfolio risk-reducing contribution of Wave and Tidal technologies assessed.

  4. Human Subjects Protection and Technology in Prevention Science: Selected Opportunities and Challenges

    OpenAIRE

    Pisani, Anthony R.; Wyman, Peter A.; Mohr, David C.; Perrino, Tatiana; Gallo, Carlos; Villamar, Juan; Kendziora, Kimberly; Howe, George W.; Sloboda, Zili; Brown, C. Hendricks

    2016-01-01

    Internet-connected devices are changing the way people live, work, and relate to one another. For prevention scientists, technological advances create opportunities to promote the welfare of human subjects and society. The challenge is to obtain the benefits while minimizing risks. In this article, we use the guiding principles for ethical human subjects research and proposed changes to the Common Rule regulations, as a basis for discussing selected opportunities and challenges that new techn...

  5. Chemical-technological approach to the selection of ceramic materials with predetermined thermistor properties

    Energy Technology Data Exchange (ETDEWEB)

    Plewa, J.; Altenburg, H. [Fachhochschule Muenster, Steinfurt (Germany). SIMa and Supraleiter-Keramik-Kristalle; Brunner, M. [Fachhochschule Koeln (Germany). Elektronische Bauelemente; Shpotyuk, O.; Vakiv, M. [Scientific Research Co. ' ' Carat' ' , Lviv Scientific Research Inst. of Materials, Lviv (Ukraine)

    2002-07-01

    The selection possibilities of quaternary Cu-Ni-Co-Mn oxide system restricted by cubic spinels (CuMn{sub 2}O{sub 4}, MnCo{sub 2}O{sub 4} and NiMn{sub 2}O{sub 4}) for NTC thermistors application were discussed. Phase compositions, microstructural features and electrical properties of the investigated spinel-structured ceramics were studied in tight connection with technological regimes of their sintering. (orig.)

  6. A Review on influencing criteria for selecting supplier of information technology services in the hospital.

    Science.gov (United States)

    Ajami, Sima; Rajabzadeh, Ahmad; Ketabi, Saeedeh

    2014-01-01

    Organizations try to outsource their activities as much as possible in order to prevent the problems and use organizational capabilities in Information Technology (IT) field. The purpose of this paper was first, to express the effective criteria for selecting suppliers of IT services, second, to explain the advantages and disadvantages of outsourcing IT in hospitals. This study was narrative review, which search was conducted with the help of libraries, books, conference proceedings, and databases of Science Direct, PubMed, Proquest, Springer, and SID (Scientific Information Database). In our searches, we employed the following keywords and their combinations: Outsourcing, information technology, hospital, decision making, and criteria. The preliminary search resulted in 120 articles, which were published between 2000 and 2013 during July 2013. After a careful analysis of the content of each paper, a total of 46 papers were selected based on their relevancy. The criteria and sub-criteria influencing outsourcing decisions in Iranian hospitals were identified in six major categories including administrative issues, issues related to the service/product, technology factors, environmental factors, risks, and economic factors associated with 15 sub-criteria containing business integration, dependence on suppliers, human resources, focus on core competencies, facilities and physical capital, innovation, quality, speed of service delivery, flexibility, market capabilities, geographical location, security, management control, cost, and financial capability. Identify the advantages and disadvantages of outsourcing and effective criteria in IT services supplier selection causes the managers be able to take the most appropriate decision to select supplier of IT services. This is a general review on influencing criteria for electing of supplier of information technology services in hospitals.

  7. A Review on influencing criteria for selecting supplier of information technology services in the hospital

    Science.gov (United States)

    Ajami, Sima; Rajabzadeh, Ahmad; Ketabi, Saeedeh

    2014-01-01

    Organizations try to outsource their activities as much as possible in order to prevent the problems and use organizational capabilities in Information Technology (IT) field. The purpose of this paper was first, to express the effective criteria for selecting suppliers of IT services, second, to explain the advantages and disadvantages of outsourcing IT in hospitals. This study was narrative review, which search was conducted with the help of libraries, books, conference proceedings, and databases of Science Direct, PubMed, Proquest, Springer, and SID (Scientific Information Database). In our searches, we employed the following keywords and their combinations: Outsourcing, information technology, hospital, decision making, and criteria. The preliminary search resulted in 120 articles, which were published between 2000 and 2013 during July 2013. After a careful analysis of the content of each paper, a total of 46 papers were selected based on their relevancy. The criteria and sub-criteria influencing outsourcing decisions in Iranian hospitals were identified in six major categories including administrative issues, issues related to the service/product, technology factors, environmental factors, risks, and economic factors associated with 15 sub-criteria containing business integration, dependence on suppliers, human resources, focus on core competencies, facilities and physical capital, innovation, quality, speed of service delivery, flexibility, market capabilities, geographical location, security, management control, cost, and financial capability. Identify the advantages and disadvantages of outsourcing and effective criteria in IT services supplier selection causes the managers be able to take the most appropriate decision to select supplier of IT services. This is a general review on influencing criteria for electing of supplier of information technology services in hospitals. PMID:25540781

  8. Technical investigation in solid waste to energy facilities and selection of suitable incineration technology for Tehran

    International Nuclear Information System (INIS)

    Mokarizdeh, V.; Lari, H.R.

    2001-01-01

    Incineration is another way for producing electrical energy. There are various methods for incineration as Stoker Fired, Suspension Fired, Rotary Kiln, Cyclone and Fluidized Bed; that each one has it's own advantages and disadvantages. Selecting suitable one for establishment in Tehran depends on many parameters like technical, economical and environmental factors. Comparing the various technologies due to the mentioned parameters by Multi Criteria Decision Making method shows that stoker-fired incinerator is the best one for the Capital City

  9. Evaluation and Selection of Renewable Energy Technologies for Highway Maintenance Facilities

    Science.gov (United States)

    Andrews, Taylor

    The interest in renewable energy has been increasing in recent years as attempts to reduce energy costs as well the consumption of fossil fuels are becoming more common. Companies and organizations are recognizing the increasing reliance on limited fossil fuels' resources, and as competition and costs for these resources grow, alternative solutions are becoming more appealing. Many federally run buildings and associations also have the added pressure of meeting the mandates of federal energy policies that dictate specific savings or reductions. Federal highway maintenance facilities run by the Department of Transportation fall into this category. To help meet energy saving goals, an investigation into potential renewable energy technologies was completed for the Ohio Department of Transportation. This research examined several types of renewable energy technologies and the major factors that affect their performance and evaluated their potential for implementation at highway maintenance facilities. Facilities energy usage data were provided, and a facility survey and site visits were completed to enhance the evaluation of technologies and the suitability for specific projects. Findings and technology recommendations were presented in the form of selection matrices, which were designed to help make selections in future projects. The benefits of utilization of other tools such as analysis software and life cycle assessments were also highlighted. These selection tools were designed to be helpful guides when beginning the pursuit of a renewable energy technology for highway maintenance facilities, and can be applied to other similar building types and projects. This document further discusses the research strategies and findings as well as the recommendations that were made to the personnel overseeing Ohio's highway maintenance facilities.

  10. Lactic Acid Bacteria Selection for Biopreservation as a Part of Hurdle Technology Approach Applied on Seafood

    Directory of Open Access Journals (Sweden)

    Norman Wiernasz

    2017-05-01

    Full Text Available As fragile food commodities, microbial, and organoleptic qualities of fishery and seafood can quickly deteriorate. In this context, microbial quality and security improvement during the whole food processing chain (from catch to plate, using hurdle technology, a combination of mild preserving technologies such as biopreservation, modified atmosphere packaging, and superchilling, are of great interest. As natural flora and antimicrobial metabolites producers, lactic acid bacteria (LAB are commonly studied for food biopreservation. Thirty-five LAB known to possess interesting antimicrobial activity were selected for their potential application as bioprotective agents as a part of hurdle technology applied to fishery products. The selection approach was based on seven criteria including antimicrobial activity, alteration potential, tolerance to chitosan coating, and superchilling process, cross inhibition, biogenic amines production (histamine, tyramine, and antibiotics resistance. Antimicrobial activity was assessed against six common spoiling bacteria in fishery products (Shewanella baltica, Photobacterium phosphoreum, Brochothrix thermosphacta, Lactobacillus sakei, Hafnia alvei, Serratia proteamaculans and one pathogenic bacterium (Listeria monocytogenes in co-culture inhibitory assays miniaturized in 96-well microtiter plates. Antimicrobial activity and spoilage evaluation, both performed in cod and salmon juice, highlighted the existence of sensory signatures and inhibition profiles, which seem to be species related. Finally, six LAB with no unusual antibiotics resistance profile nor histamine production ability were selected as bioprotective agents for further in situ inhibitory assays in cod and salmon based products, alone or in combination with other hurdles (chitosan, modified atmosphere packing, and superchilling.

  11. Process cost and facility considerations in the selection of primary cell culture clarification technology.

    Science.gov (United States)

    Felo, Michael; Christensen, Brandon; Higgins, John

    2013-01-01

    The bioreactor volume delineating the selection of primary clarification technology is not always easily defined. Development of a commercial scale process for the manufacture of therapeutic proteins requires scale-up from a few liters to thousands of liters. While the separation techniques used for protein purification are largely conserved across scales, the separation techniques for primary cell culture clarification vary with scale. Process models were developed to compare monoclonal antibody production costs using two cell culture clarification technologies. One process model was created for cell culture clarification by disc stack centrifugation with depth filtration. A second process model was created for clarification by multi-stage depth filtration. Analyses were performed to examine the influence of bioreactor volume, product titer, depth filter capacity, and facility utilization on overall operating costs. At bioreactor volumes 5,000 L, clarification using centrifugation followed by depth filtration offers significant cost savings. For bioreactor volumes of ∼ 2,000 L, clarification costs are similar between depth filtration and centrifugation. At this scale, factors including facility utilization, available capital, ease of process development, implementation timelines, and process performance characterization play an important role in clarification technology selection. In the case study presented, a multi-product facility selected multi-stage depth filtration for cell culture clarification at the 500 and 2,000 L scales of operation. Facility implementation timelines, process development activities, equipment commissioning and validation, scale-up effects, and process robustness are examined. © 2013 American Institute of Chemical Engineers.

  12. 3D Visualization of Urban Area Using Lidar Technology and CityGML

    Science.gov (United States)

    Popovic, Dragana; Govedarica, Miro; Jovanovic, Dusan; Radulovic, Aleksandra; Simeunovic, Vlado

    2017-12-01

    3D models of urban areas have found use in modern world such as navigation, cartography, urban planning visualization, construction, tourism and even in new applications of mobile navigations. With the advancement of technology there are much better solutions for mapping earth’s surface and spatial objects. 3D city model enables exploration, analysis, management tasks and presentation of a city. Urban areas consist of terrain surfaces, buildings, vegetation and other parts of city infrastructure such as city furniture. Nowadays there are a lot of different methods for collecting, processing and publishing 3D models of area of interest. LIDAR technology is one of the most effective methods for collecting data due the large amount data that can be obtained with high density and geometrical accuracy. CityGML is open standard data model for storing alphanumeric and geometry attributes of city. There are 5 levels of display (LoD0, LoD1, LoD2, LoD3, LoD4). In this study, main aim is to represent part of urban area of Novi Sad using LIDAR technology, for data collecting, and different methods for extraction of information’s using CityGML as a standard for 3D representation. By using series of programs, it is possible to process collected data, transform it to CityGML and store it in spatial database. Final product is CityGML 3D model which can display textures and colours in order to give a better insight of the cities. This paper shows results of the first three levels of display. They consist of digital terrain model and buildings with differentiated rooftops and differentiated boundary surfaces. Complete model gives us a realistic view of 3D objects.

  13. Measuring process performance within healthcare logistics - a decision tool for selecting track and trace technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    quality of work. Data validity is essential for enabling performance measurement, and selecting the right technologies is important to achieve this. A case study of the hospital cleaning process was conducted at a public Danish hospital to develop a framework for assessing technologies in healthcare......Monitoring tasks and ascertaining quality of work is difficult in a logistical healthcare process due to cleaning personnel being dispersed throughout the hospital. Performance measurement can support the organization in improving the efficiency and effectiveness of processes and in ensuring...... logistics. A set of decision indicators was identified in the case study to assess technologies based on expected process performance. Two aspects of performance measurement were investigated for the hospital cleaning process: what to measure and how to measure it....

  14. Geoengineering Responses to Climate Change Selected Entries from the Encyclopedia of Sustainability Science and Technology

    CERN Document Server

    Vaughan, Naomi

    2013-01-01

    Failure by the international community to make substantive progress in reducing CO2 emissions, coupled with recent evidence of accelerating climate change, has brought increasing urgency to the search for additional remediation approaches.  This book presents a selection of state-of-the-art geoengineering methods for deliberately reducing the effects of anthropogenic climate change, either by actively removing greenhouse gases from the atmosphere or by decreasing the amount of sunlight absorbed at the Earth’s surface.  These methods contrast with more conventional mitigation approaches which focus on reducing emissions of greenhouse gases, especially carbon dioxide. Geoengineering technologies could become a key tool to be used in conjunction with emissions reduction to limit the magnitude of climate change.  Featuring authoritative, peer-reviewed entries from the Encyclopedia of Sustainability Science and Technology, this book presents a wide range of climate change remediation technologies. Examines th...

  15. Comparison of curricula in radiation technology in the field of radiotherapy in selected European Union countries

    International Nuclear Information System (INIS)

    Janaszczyk, A.; Bogusz-Czerniewicz, M.

    2011-01-01

    Background: Radiation technology is a discipline of medical science which deals with diagnostics, imaging and radiotherapy, that is treatment by ionizing radiation. Aim: To present and compare the existing curricula of radiation technology in selected EU countries. Materials and methods: The research work done for the purpose of the comparative analysis was based on the methods of diagnostic test and document analysis. Results: The comparison of curricula in selected countries, namely Austria, France, the Netherlands and Poland, showed that admission criteria to radiation technology courses are varied and depend on regulations of respective Ministries of Health. The most restrictive conditions, including written tests in biology, chemistry and physics, and psychometric test, are those in France. Contents of basic and specialist subject groups are very similar in all the countries. The difference is in the number of ECT points assigned to particular subjects and the number of course hours offered. The longest practical training is provided in the Netherlands and the shortest one in Poland. The duration of studies in the Netherlands is 4 years, while in Poland it is 3 years. Austria is the only country to offer extra practical training in quality management. Conclusion: Graduates in the compared EU countries have similar level of qualifications in the fields of operation of radiological equipment, radiotherapy, nuclear medicine, foreign language and specialist terminology in the field of medical and physical sciences, general knowledge of medical and physical sciences, and detailed knowledge of radiation technology. (authors)

  16. Optimal Selection Method of Process Patents for Technology Transfer Using Fuzzy Linguistic Computing

    Directory of Open Access Journals (Sweden)

    Gangfeng Wang

    2014-01-01

    Full Text Available Under the open innovation paradigm, technology transfer of process patents is one of the most important mechanisms for manufacturing companies to implement process innovation and enhance the competitive edge. To achieve promising technology transfers, we need to evaluate the feasibility of process patents and optimally select the most appropriate patent according to the actual manufacturing situation. Hence, this paper proposes an optimal selection method of process patents using multiple criteria decision-making and 2-tuple fuzzy linguistic computing to avoid information loss during the processes of evaluation integration. An evaluation index system for technology transfer feasibility of process patents is designed initially. Then, fuzzy linguistic computing approach is applied to aggregate the evaluations of criteria weights for each criterion and corresponding subcriteria. Furthermore, performance ratings for subcriteria and fuzzy aggregated ratings of criteria are calculated. Thus, we obtain the overall technology transfer feasibility of patent alternatives. Finally, a case study of aeroengine turbine manufacturing is presented to demonstrate the applicability of the proposed method.

  17. Effective Connectivity from Early Visual Cortex to Posterior Occipitotemporal Face Areas Supports Face Selectivity and Predicts Developmental Prosopagnosia.

    Science.gov (United States)

    Lohse, Michael; Garrido, Lucia; Driver, Jon; Dolan, Raymond J; Duchaine, Bradley C; Furl, Nicholas

    2016-03-30

    Face processing is mediated by interactions between functional areas in the occipital and temporal lobe, and the fusiform face area (FFA) and anterior temporal lobe play key roles in the recognition of facial identity. Individuals with developmental prosopagnosia (DP), a lifelong face recognition impairment, have been shown to have structural and functional neuronal alterations in these areas. The present study investigated how face selectivity is generated in participants with normal face processing, and how functional abnormalities associated with DP, arise as a function of network connectivity. Using functional magnetic resonance imaging and dynamic causal modeling, we examined effective connectivity in normal participants by assessing network models that include early visual cortex (EVC) and face-selective areas and then investigated the integrity of this connectivity in participants with DP. Results showed that a feedforward architecture from EVC to the occipital face area, EVC to FFA, and EVC to posterior superior temporal sulcus (pSTS) best explained how face selectivity arises in both controls and participants with DP. In this architecture, the DP group showed reduced connection strengths on feedforward connections carrying face information from EVC to FFA and EVC to pSTS. These altered network dynamics in DP contribute to the diminished face selectivity in the posterior occipitotemporal areas affected in DP. These findings suggest a novel view on the relevance of feedforward projection from EVC to posterior occipitotemporal face areas in generating cortical face selectivity and differences in face recognition ability. Areas of the human brain showing enhanced activation to faces compared to other objects or places have been extensively studied. However, the factors leading to this face selectively have remained mostly unknown. We show that effective connectivity from early visual cortex to posterior occipitotemporal face areas gives rise to face

  18. Problems of teaching students to use the featured technologies in the area of semantic web

    Science.gov (United States)

    Klimov, V. V.; Chernyshov, A. A.; Balandina, A. I.; Kostkina, A. D.

    2017-01-01

    The following paper contains the description of up-to-date technologies in the area of web-services development, service-oriented architecture and the Semantic Web. The paper contains the analysis of the most popular and widespread technologies and methods in the semantic web area which are used in the developed educational course. In the paper, we also describe the problem of teaching students to use these technologies and specify conditions for the creation of the learning and development course. We also describe the main exercise for personal work and skills, which all the students learning this course have to gain. Moreover, in the paper we specify the problem with software which students are going to use while learning this course. In order to solve this problem, we introduce the developing system which will be used to support the laboratory works. For this moment this system supports only the fourth work execution, but our following plans contain the expansion of the system in order to support the leftover works.

  19. Developing Information Technology for Vocational Education in Contiguous Destitute Areas Significance, Problems, and Countermeasures: The Case of the Wuling Mountain Area

    Science.gov (United States)

    Wang, Jie; Xu, Fenghua

    2014-01-01

    Using the Wuling Mountain area as a case study, the authors discuss the significance as well as five problems of developing information technology for vocational education in contiguous destitute areas. Recommendations are provided at the end of the article. [Translated by Michelle LeSourd.

  20. Environmental risk factors and health outcomes in selected communities of the Niger delta area, Nigeria.

    Science.gov (United States)

    Ana, Godson; Sridhar, Mynepalli K C; Bamgboye, Elijah A

    2009-07-01

    The main aim of this study was to assess the prevalence of various health outcomes associated with exposure to environmental risk factors including industrial pollution in selected communities of Nigeria's oil-rich Niger delta area (NDA). The study involved both laboratory experiments and community health surveys using questionnaires and hospital records. A total of 14 air samples, 16 grab soil samples and 18 surface water samples were collected and analyzed for physicochemical parameters including heavy metals and polycyclic aromatic hydrocarbons (PAHs) using standard methods. A 77-item questionnaire was administered on randomly selected 349 subjects. A five-year record was collected from health facilities located in the two communities. The laboratory results indicated that the median PAH level at Eleme as compared to Ahoada East was higher than the guideline limit 50 ng/l for surface waters. The mean TSP level at Eleme was higher than the level at Ahoada East and the guideline limit 100 microg/m3. The median PAH level at Eleme was higher than the level at Ahoada East and the guideline limit problem (p = 0.044). At Ahoada East commonly consumed aquatic food was highly significantly associated with painful body outgrowth (p fuel types was also highly significantly associated with child deformities (p < 0.0001). Hospital records showed high proportions of respiratory disorder among males (3.85%) and females (4.39%) at Eleme as compared to the proportion of respiratory disorder among males (3.68%) and females (4.18%) at Ahoada East. The study shows that industrial communities such as Eleme, which are exposed to higher levels of air pollution, are more predisposed to respiratory morbidities, skin disorders and other related health risks.

  1. The cost and benefit analysis of a contaminated area remediation: case study of dose level selection

    International Nuclear Information System (INIS)

    Lauria, D.C.

    2006-01-01

    In recent years there has been an increasing awareness of the radiological impact of non-nuclear industries that extract and/or process ores and minerals containing naturally occurring radioactive material (NORM). Without radiological rules, these industrial activities may result in significant radioactive contamination of installations and sites. Depending on the potential hazardous to the environment and public health, the radioactive contaminated sites may require remediation. The extent of the site cleanup is a function of the size, localization, complexity, potential risks and on possible future uses envisioned for the site. Since worker and public health, public anxiety and economics factors are involved; the selection of an appropriate dose level can be quite complicated. This paper discusses the selection of a dose level criterion to remedy a site, which was contaminated by wastes from monazite processing. The site is located in the Sao Paulo city; the most densely populated Brazilian City. In its 60,000 square meters of area, a preliminary survey showed contaminated zones covering an area of 6,500 square meters. In some places, contamination was found below the superficial layer of the soil, being the radionuclide vertical distribution not uniform. The 228 Ra soil activity concentration reached values up to 33,000 Bq/kg while those for 226 Ra reached values up to 6,700 Bq/kg. Based on pathway analysis model and considering both the current land use and a hypothetical residential scenario, the residual contamination levels of radionuclides in soil have been derived for dose values of 10 mSv/y (dose level for intervention), 5 mSv/y, 3 mSv/y, 1 mSv/y (dose limit for practices) and 0.3 mSv/y (dose constraint for practices). An optimized value o f annual dose of about 5 mSv/y would be a good option for intervention level, but taking into account the public concern and anxiety, the site location and size, and the remediation costs, it is suggested the

  2. The cost and benefit analysis of a contaminated area remediation: case study of dose level selection

    Energy Technology Data Exchange (ETDEWEB)

    Lauria, D.C. [Instituto de Radioproteccion e Dosimetria- IRD/CNEN, Av. Salvador Allende s/n, Barra de Tijuca, Rio de Janeiro- RJ (Brazil)]. e-mail: dejanira@ird.gov.br

    2006-07-01

    In recent years there has been an increasing awareness of the radiological impact of non-nuclear industries that extract and/or process ores and minerals containing naturally occurring radioactive material (NORM). Without radiological rules, these industrial activities may result in significant radioactive contamination of installations and sites. Depending on the potential hazardous to the environment and public health, the radioactive contaminated sites may require remediation. The extent of the site cleanup is a function of the size, localization, complexity, potential risks and on possible future uses envisioned for the site. Since worker and public health, public anxiety and economics factors are involved; the selection of an appropriate dose level can be quite complicated. This paper discusses the selection of a dose level criterion to remedy a site, which was contaminated by wastes from monazite processing. The site is located in the Sao Paulo city; the most densely populated Brazilian City. In its 60,000 square meters of area, a preliminary survey showed contaminated zones covering an area of 6,500 square meters. In some places, contamination was found below the superficial layer of the soil, being the radionuclide vertical distribution not uniform. The {sup 228} Ra soil activity concentration reached values up to 33,000 Bq/kg while those for {sup 226} Ra reached values up to 6,700 Bq/kg. Based on pathway analysis model and considering both the current land use and a hypothetical residential scenario, the residual contamination levels of radionuclides in soil have been derived for dose values of 10 mSv/y (dose level for intervention), 5 mSv/y, 3 mSv/y, 1 mSv/y (dose limit for practices) and 0.3 mSv/y (dose constraint for practices). An optimized value o f annual dose of about 5 mSv/y would be a good option for intervention level, but taking into account the public concern and anxiety, the site location and size, and the remediation costs, it is suggested

  3. Potential Science and Technology Game Changers for the Ground Warfare of 2050: Selected Projections Made in 2017

    Science.gov (United States)

    2018-02-01

    ARL-TR-8283 ● FEB 2018 US Army Research Laboratory Potential Science and Technology Game Changers for the Ground Warfare of 2050...Science and Technology Game Changers for the Ground Warfare of 2050: Selected Projections Made in 2017 by Alexander Kott Office of the Director...Brian Sadler Vehicle Technology Directorate, ARL Ananthram Swami Computational and Information Sciences Directorate, ARL Approved for

  4. Potential of organic Rankine cycle technology in India: Working fluid selection and feasibility study

    International Nuclear Information System (INIS)

    Sarkar, Jahar; Bhattacharyya, Souvik

    2015-01-01

    India has great potential to employ the ORC (organic Rankine cycle) technology for conversion of low temperature waste heat and renewable energy. In this study, available waste heat and relevant renewable heat sources in India are reviewed and suitable working fluids for ORC have been selected based on operational, environmental and safety criteria. A feasibility study and comparison of selected fluids for ORC is also presented for Indian climates along with discussions on component, operation and cost related aspects. A comprehensive review on available heat sources and sinks shows that India has plenty of waste heat and renewable energy sources for electricity generation by means of ORC; however, condenser operation may be challenging due to wide ambient temperature variation. Appropriate performance comparison among selected working fluids shows that ammonia is the best fluid in terms of net power generation and compactness of turbo-machineries, whereas n-Pentane is the best fluid in terms of thermal efficiency and heat exchanger compactness. Both are recommended as working fluids for ORC installations in India. The study reveals that there is a great opportunity to employ this technology in India provided we have to overcome some challenges related to component selection, finance and maintenance. - Highlights: • Available waste heat and renewable heat energies, and sinks in India are reviewed. • Suitable working fluids are selected by operational, environmental and safety criteria. • A feasibility study and comparison of selected fluids are presented for Indian climates. • Ammonia and n-Pentane are recommended for ORC installation in India. • Challenges related to plant component, operation and cost are discussed.

  5. Wastewater collection and treatment technologies for semi-urban areas of India: a case study.

    Science.gov (United States)

    Sundaravadivel, M; Vigneswaran, S

    2001-01-01

    Sanitation and wastewater management problems in small and medium towns in India (referred to as "semi-urban areas"--SUAs) are distinctly different from those of large cities or rural villages. There is an apparent lack of choices of appropriate sanitation options for these semi-urban areas, leading them to adopt on-site sanitation technologies. A field study of four such small towns in India was conducted to evaluate the suitability of available low-cost wastewater collection and treatment technologies, in light of their current practice. Based on the field study, this paper suggests a system comprising "combined surface sewers" and "reed-bed channel" for collection and treatment of wastewater for semi-urban areas, that can utilize all the existing infrastructure to effect better sanitation at lower costs. The suggested system involves converting the existing open wastewater collection drains on the road sides, as "decentralized" networks of covered drains with simple structural modifications to collect both wastewater and stormwater; and, converting the large open drains on the outskirts of SUAs that carry wastewater to agricultural fields, as gravel media filled beds planted with local reeds. Cost estimates for the towns studied indicate this system to be over 70% cheaper compared to conventional collection and treatment systems.

  6. Vs30 mapping at selected sites within the Greater Accra Metropolitan Area

    Science.gov (United States)

    Nortey, Grace; Armah, Thomas K.; Amponsah, Paulina

    2018-06-01

    A large part of Accra is underlain by a complex distribution of shallow soft soils. Within seismically active zones, these soils hold the most potential to significantly amplify seismic waves and cause severe damage, especially to structures sited on soils lacking sufficient stiffness. This paper presents preliminary site classification for the Greater Accra Metropolitan Area of Ghana (GAMA), using experimental data from two-dimensional (2-D) Multichannel Analysis of Surface Wave (MASW) technique. The dispersive characteristics of fundamental mode Rayleigh type surface waves were utilized for imaging the shallow subsurface layers (approx. up to 30 m depth) by estimating the 1D (depth) and 2D (depth and surface location) shear wave velocities at 5 selected sites. The average shear wave velocity for 30 m depth (Vs30), which is critical in evaluating the site response of the upper 30 m, was estimated and used for the preliminary site classification of the GAM area, as per NEHRP (National Earthquake Hazards Reduction Program). Based on the Vs30 values obtained in the study, two common site types C, and D corresponding to shallow (>6 m Lower velocity profiles are inferred for the residual soils (sandy to silty clays), derived from the Accraian Formation that lies mainly within Accra central. Stiffer soil sites lie to the north of Accra, and to the west near Nyanyano. The seismic response characteristics over the residual soils in the GAMA have become apparent using the MASW technique. An extensive site effect map and a more robust probabilistic seismic hazard analysis can now be efficiently built for the metropolis, by considering the site classes and design parameters obtained from this study.

  7. Promoting exports in the energy technology area; Foerderung des Exports im Bereich der Energietechnologien

    Energy Technology Data Exchange (ETDEWEB)

    Iten, R.; Oettli, B. [Infras, Zuerich (Switzerland); Jochem, E.; Mannsbart, W. [Fraunhofer Institut Systemtechnik und Innovationsforschung, Karlsruhe (Germany)

    2001-07-01

    This report for the Swiss Federal Office of Energy (SFOE) examines the position of Switzerland as a leader in the investment goods markets for energy-efficiency products and for technologies for using renewable forms of energy. The report quotes figures for exports in these areas and discusses the difficulty of extracting useful data on these products from normal statistical data. Analyses made by a group of experts from the export-oriented technology field, energy service providers and representatives of export promotion institutions are presented and figures are quoted for various product categories. Factors promoting the competitiveness of Swiss products are discussed as well as those impeding it. An analysis of export potential is presented and measures to promote export are discussed. The report also discusses the aids and promotion activities that are considered necessary by companies in the field and the macro-economic perspectives of increased export promotion.

  8. Large area SiC coating technology of RBSC for semiconductor processing component

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ji Yeon; Kim, Weon Ju

    2001-06-01

    As the semiconductor process is developed for the larger area wafer and the larger-scale integration, the processing fixtures are required to have excellent mechanical and high temperature properties. This highlights the importance of silicon carbide-based materials as a substitute for quartz-based susceptors. In this study, SiC coating technology on reaction sintered (RS) SiC with thickness variation of +/- 10% within a diameter of 8 inch by low pressure chemical vapor deposition has been developed for making a plate type SiC fixture such as heater, baffle, etc., with a diameter of 12 inch. Additionally, a state of art on fabrication technology and products of the current commercial SiC fixtures has been described.

  9. Adapting cognitive radio technology for low-power wireless personal area network devices

    DEFF Research Database (Denmark)

    Toftegaard, Thomas Skjødeberg; Rohde, John

    2011-01-01

    The application of wireless personal area network (WPAN) and simple point-to-point wireless communication devices has increased drastically both in private household and in our workspaces in general over the last decade. Combined with the fact that the total number of wireless devices...... and associated standards present in the wireless environment is experiencing an extreme growth, the frequency spectrum scarcity is exposed as a severe challenge. Setting up efficient and reliable wireless WPAN links can be challenging even today. This is especially true because of the intensive use...... discusses the challenges associated with the implementation of highly reliable low-power WPAN networks for the future and the adaption of Cognitive Radio technology as a potential solution. A brief status on the maturity of CR technology will be presented as an integral part of this discussion....

  10. Large area SiC coating technology of RBSC for semiconductor processing component

    International Nuclear Information System (INIS)

    Park, Ji Yeon; Kim, Weon Ju

    2001-06-01

    As the semiconductor process is developed for the larger area wafer and the larger-scale integration, the processing fixtures are required to have excellent mechanical and high temperature properties. This highlights the importance of silicon carbide-based materials as a substitute for quartz-based susceptors. In this study, SiC coating technology on reaction sintered (RS) SiC with thickness variation of +/- 10% within a diameter of 8 inch by low pressure chemical vapor deposition has been developed for making a plate type SiC fixture such as heater, baffle, etc., with a diameter of 12 inch. Additionally, a state of art on fabrication technology and products of the current commercial SiC fixtures has been described

  11. Recovery of Cobalt as Cobalt Oxalate from Cobalt Tailings Using Moderately Thermophilic Bioleaching Technology and Selective Sequential Extraction

    Directory of Open Access Journals (Sweden)

    Guobao Chen

    2016-07-01

    Full Text Available Cobalt is a very important metal which is widely applied in various critical areas, however, it is difficult to recover cobalt from minerals since there is a lack of independent cobalt deposits in nature. This work is to provide a complete process to recover cobalt from cobalt tailings using the moderately thermophilic bioleaching technology and selective sequential extraction. It is found that 96.51% Co and 26.32% Cu were extracted after bioleaching for four days at 10% pulp density. The mean compositions of the leach solutions contain 0.98 g·L−1 of Co, 6.52 g·L−1 of Cu, and 24.57 g·L−1 of Fe (III. The copper ion was then recovered by a solvent extraction process and the ferric ions were selectively removed by applying a goethite deironization process. The technological conditions of the above purification procedures were deliberately discussed. Over 98.6% of copper and 99.9% of ferric ions were eliminated from the leaching liquor. Cobalt was finally produced as cobalt oxalate and its overall recovery during the whole process was greater than 95%. The present bioleaching process of cobalt is worth using for reference to deal with low-grade cobalt ores.

  12. Innovative technology through selective laser sintering in mechatronics, biomedical engineering and industry

    Directory of Open Access Journals (Sweden)

    Gheorghe Ion GHEORGHE

    2011-03-01

    Full Text Available A new technology, using new materials specially designed for complex geometries,extensively used in research-development and innovation area will be presented in this paper. Evenhighly complex geometries are created directly from 3D CAD data, fully automatically, in just a fewhours and without any tooling. It is a net-shape process, producing parts with high accuracy anddetail resolution, good surface quality and excellent mechanical properties.

  13. Region-specificity of GABAA receptor mediated effects on orientation and direction selectivity in cat visual cortical area 18.

    Science.gov (United States)

    Jirmann, Kay-Uwe; Pernberg, Joachim; Eysel, Ulf T

    2009-01-01

    The role of GABAergic inhibition in orientation and direction selectivity has been investigated with the GABA(A)-Blocker bicuculline in the cat visual cortex, and results indicated a region specific difference of functional contributions of GABAergic inhibition in areas 17 and 18. In area 17 inhibition appeared mainly involved in sculpturing orientation and direction tuning, while in area 18 inhibition seemed more closely associated with temporal receptive field properties. However, different types of stimuli were used to test areas 17 and 18 and further studies performed in area 17 suggested an important influence of the stimulus type (single light bars vs. moving gratings) on the evoked responses (transient vs. sustained) and inhibitory mechanisms (GABA(A) vs. GABA(B)) which in turn might be more decisive for the specific results than the cortical region. To insert the missing link in this chain of arguments it was necessary to study GABAergic inhibition in area 18 with moving light bars, which has not been done so far. Therefore, in the present study we investigated area 18 cells responding to oriented moving light bars with extracellular recordings and reversible microiontophoretic blockade of GABAergig inhibition with bicuculline methiodide. The majority of neurons was characterized by a pronounced orientation specificity and variable degrees of direction selectivity. GABA(A)ergic inhibition significantly influenced preferred orientation and preferred direction in area 18. During the action of bicuculline orientation tuning width increased and orientation and direction selectivity indices decreased. Our results obtained in area 18 with moving bar stimuli, although in the proportion of affected cells similar to those described in area 17, quantitatively matched the findings for direction and orientation specificity obtained with moving gratings in area 18. Accordingly, stimulus type is not decisive in area 18 and the GABA(A) dependent, inhibitory intracortical

  14. Review of tri-generation technologies: Design evaluation, optimization, decision-making, and selection approach

    International Nuclear Information System (INIS)

    Al Moussawi, Houssein; Fardoun, Farouk; Louahlia-Gualous, Hasna

    2016-01-01

    Highlights: • Trigeneration technologies classified and reviewed according to prime movers. • Relevant heat recovery equipment discussed with thermal energy storage. • Trigeneration evaluated based on energy, exergy, economy, environment criteria. • Design, optimization, and decision-making methods classified and presented. • System selection suggested according to user preferences. - Abstract: Electricity, heating, and cooling are the three main components constituting the tripod of energy consumption in residential, commercial, and public buildings all around the world. Their separate generation causes higher fuel consumption, at a time where energy demands and fuel costs are continuously rising. Combined cooling, heating, and power (CCHP) or trigeneration could be a solution for such challenge yielding an efficient, reliable, flexible, competitive, and less pollutant alternative. A variety of trigeneration technologies are available and their proper choice is influenced by the employed energy system conditions and preferences. In this paper, different types of trigeneration systems are classified according to the prime mover, size and energy sequence usage. A leveled selection procedure is subsequently listed in the consecutive sections. The first level contains the applied prime mover technologies which are considered to be the heart of any CCHP system. The second level comprises the heat recovery equipment (heating and cooling) of which suitable selection should be compatible with the used prime mover. The third level includes the thermal energy storage system and heat transfer fluid to be employed. For each section of the paper, a survey of conducted studies with CHP/CCHP implementation is presented. A comprehensive table of evaluation criteria for such systems based on energy, exergy, economy, and environment measures is performed, along with a survey of the methods used in their design, optimization, and decision-making. Moreover, a classification

  15. Selection of hybrid vehicle for green environment using multi-attributive border approximation area comparison method

    Directory of Open Access Journals (Sweden)

    Tapas Kumar Biswas

    2018-02-01

    Full Text Available The mobility sector including all kinds of transportation systems are facing global challenges in re-spect of green environmental issues. There has been a paradigm shift in the concept of design and manufacturing of automotive vehicles keeping in mind the scarcity of fossil fuel and the impact of emission on environment due to burning of it. The addition of hybrid and electric vehicles in pas-senger car segment has got significant momentum to address the global challenges. This research investigates the performance of a group of hybrid vehicles from customers’ perspective. Among the different brands that are available in the hybrid vehicle market, smart customers have given pri-ority to vehicle cost, mileage, tail pipe emission, comfortness and high tank size volume for long drive. Considering these attributes, selection strategy for hybrid vehicles has been developed using entropy based multi-attributive border approximation area comparison (MABAC method. This research highlights the best hybrid vehicle which reduces air pollution in cities with other significant environmental benefits, reduces dependence on foreign energy imports and minimizes the annual fuel cost.

  16. Spiders (Araneae of selected sinkholes of Moravský kras Protected Landscape Area (Czech Republic

    Directory of Open Access Journals (Sweden)

    Vladimír Hula

    2012-01-01

    Full Text Available In this study, we present faunistic data about spiders in selected sinkholes of northern part of Moravský kras Protected Landscape Area. Time of collection was established in the following terms: 24 March 2010 – 22 September 2010. We collected altogether 5742 adult specimens which were determined to 59 species of 14 families. We found two very rare spiders (critically endangered Porrhomma errans and endangered Walckenaeria monoceros and several interesting, rarely collected bioindicator species (Alopecosa trabalis, Mecopisthes silus, Zelotes longipes. From the bioindicative evaluation point of view, 44% of found species belong to species with connection to natural habitats, 37% belong to species preferring semi-natural habitats, and 19% belong to species of disturbed habitats. From the relictness point of view, majority of species was of the expansive category (53%, 40% of class II relicts, and only 7% of class I relicts. Sink holes did not increase total biodiversity of agricultural land too much because of their relative small size.

  17. Silent reading of direct versus indirect speech activates voice-selective areas in the auditory cortex.

    Science.gov (United States)

    Yao, Bo; Belin, Pascal; Scheepers, Christoph

    2011-10-01

    In human communication, direct speech (e.g., Mary said: "I'm hungry") is perceived to be more vivid than indirect speech (e.g., Mary said [that] she was hungry). However, for silent reading, the representational consequences of this distinction are still unclear. Although many of us share the intuition of an "inner voice," particularly during silent reading of direct speech statements in text, there has been little direct empirical confirmation of this experience so far. Combining fMRI with eye tracking in human volunteers, we show that silent reading of direct versus indirect speech engenders differential brain activation in voice-selective areas of the auditory cortex. This suggests that readers are indeed more likely to engage in perceptual simulations (or spontaneous imagery) of the reported speaker's voice when reading direct speech as opposed to meaning-equivalent indirect speech statements as part of a more vivid representation of the former. Our results may be interpreted in line with embodied cognition and form a starting point for more sophisticated interdisciplinary research on the nature of auditory mental simulation during reading.

  18. Performance Improvements of Selective Emitters by Laser Openings on Large-Area Multicrystalline Si Solar Cells

    Directory of Open Access Journals (Sweden)

    Sheng-Shih Wang

    2014-01-01

    Full Text Available This study focuses on the laser opening technique used to form a selective emitter (SE structure on multicrystalline silicon (mc-Si. This technique can be used in the large-area (156 × 156 mm2 solar cells. SE process of this investigation was performed using 3 samples SE1–SE3. Laser fluences can vary in range of 2–5 J/cm2. The optimal conversion efficiency of 15.95% is obtained with the SE3 (2 J/cm2 fluence after laser opening with optimization of heavy and light dopant, which yields a gain of 0.48%abs compared with that of a reference cell (without fluence. In addition, this optimal SE3 cell displays improved characteristics compared with other cells with a higher average value of external quantum efficiency (EQEavg = 68.6% and a lower average value of power loss (Ploss = 2.33 mW/cm2. For the fabrication of solar cells, the laser opening process comprises fewer steps than traditional photolithography does. Furthermore, the laser opening process decreases consumption of chemical materials; therefore, the laser opening process decreases both time and cost. Therefore, SE process is simple, cheap, and suitable for commercialization. Moreover, the prominent features of the process render it effective means to promote overall performance in the photovoltaic industry.

  19. Toward optimized light utilization in nanowire arrays using scalable nanosphere lithography and selected area growth.

    Science.gov (United States)

    Madaria, Anuj R; Yao, Maoqing; Chi, Chunyung; Huang, Ningfeng; Lin, Chenxi; Li, Ruijuan; Povinelli, Michelle L; Dapkus, P Daniel; Zhou, Chongwu

    2012-06-13

    Vertically aligned, catalyst-free semiconducting nanowires hold great potential for photovoltaic applications, in which achieving scalable synthesis and optimized optical absorption simultaneously is critical. Here, we report combining nanosphere lithography (NSL) and selected area metal-organic chemical vapor deposition (SA-MOCVD) for the first time for scalable synthesis of vertically aligned gallium arsenide nanowire arrays, and surprisingly, we show that such nanowire arrays with patterning defects due to NSL can be as good as highly ordered nanowire arrays in terms of optical absorption and reflection. Wafer-scale patterning for nanowire synthesis was done using a polystyrene nanosphere template as a mask. Nanowires grown from substrates patterned by NSL show similar structural features to those patterned using electron beam lithography (EBL). Reflection of photons from the NSL-patterned nanowire array was used as a measure of the effect of defects present in the structure. Experimentally, we show that GaAs nanowires as short as 130 nm show reflection of <10% over the visible range of the solar spectrum. Our results indicate that a highly ordered nanowire structure is not necessary: despite the "defects" present in NSL-patterned nanowire arrays, their optical performance is similar to "defect-free" structures patterned by more costly, time-consuming EBL methods. Our scalable approach for synthesis of vertical semiconducting nanowires can have application in high-throughput and low-cost optoelectronic devices, including solar cells.

  20. Assessment of Selected Heavy Metals in Seawater and Sediment at Klang Coastal Area Malaysia

    International Nuclear Information System (INIS)

    Noor Aziatul Aini Hamzan; Farah Fardiana Mohamad Zaini; Mohd Ismail Ibrahim; Nik Azlin Nik Ariffin

    2015-01-01

    Sediments are capable of transporting loads of adsorbed nutrients, pesticides, heavy metals, and other toxins. In this study, the samples of sediment were collected from four sampling points (Kapar, Sungai Puloh, Sementa and North Port) using sediment core sampler. The cores then was sub-sampled by slicing into 1 cm slices and dried at 60 degree Celsius until mass become constant and the weight recorded. The samples were pulverized and sieved through 220 μm stainless steel sieves. Each sub-sample digested using aqua regia acids. For seawater, the samples were evaporated using the hotplate at 60 degree Celsius. The concentration of heavy metals was determined by inductively coupled plasma optical emission spectrometry (ICP-OES). The highest concentration of copper, zinc, iron and lead was observed from seawater samples obtained from Sementa while highest concentration of cadmium was found from Kapar samples). Most of the bottom seawater gives high concentration of the heavy metal compare to the surface. For sediment, the overall concentration of heavy metal in each layer was fluctuated. From the analysis, there is a significant correlation for overall selected heavy metals and the samples (seawater and sediment) that study in this area. (author)

  1. Development of large area si detectors based on planar technology for charged particles

    International Nuclear Information System (INIS)

    Zhang Wanchang; Sun Liang; Huang Xiaojian; Liu Yang; Chen Guozhu

    2009-01-01

    This paper describes the processing method of large area Si detectors fabricated by planar technology for charged particles. In order to decrease the detectors leakage current, the surface passivation technique was used. The paper gives the measurement results of the leakage current of 300μm thick, 20mm diameter detectors and 500μm thick, 40mm diameter detectors respectively. The spectra of the detectors for 241 Am 5.486MeV α particles are also provided at room temperature. (authors)

  2. Technology of surface wastewater purification, including high-rise construction areas

    Science.gov (United States)

    Tsyba, Anna; Skolubovich, Yury

    2018-03-01

    Despite on the improvements in the quality of high-rise construction areas and industrial wastewater treatment, the pollution of water bodies continues to increase. This is due to the organized and unorganized surface untreated sewage entry into the reservoirs. The qualitative analysis of some cities' surface sewage composition is carried out in the work. Based on the published literature review, the characteristic contamination present in surface wastewater was identified. The paper proposes a new technology for the treatment of surface sewage and presents the results of preliminary studies.

  3. Integration of educational and scientific-technological areas during the process of education of aerospace engineers

    Science.gov (United States)

    Mayorova, Vera

    2011-09-01

    test-beds for quick and affordable trial-and-test of new technologies and design solutions in aerospace followed by implementation of selected efficiencies in the industry; development and improvement of ground control infrastructure based in the university, which includes the Mission Control Center and the Earth Remote Sensing Center; development of cooperative partnerships with international partners in the field of microsatellite technologies with the goal of sharing experience, uniting efforts in preparing and running scientific and educational experiments and creating next-generation spacecraft by multi-national student groups. Such approaches allow creating seamless environment that unites educational, scientific and innovative processes. This allows students to develop high professionalism, modern engineering thinking and stable engineering skills at an early stage of education at the university.

  4. Selecting information technology for physicians' practices: a cross-sectional study

    Directory of Open Access Journals (Sweden)

    Eden Karen

    2002-04-01

    Full Text Available Abstract Background Many physicians are transitioning from paper to electronic formats for billing, scheduling, medical charts, communications, etc. The primary objective of this research was to identify the relationship (if any between the software selection process and the office staff's perceptions of the software's impact on practice activities. Methods A telephone survey was conducted with office representatives of 407 physician practices in Oregon who had purchased information technology. The respondents, usually office managers, answered scripted questions about their selection process and their perceptions of the software after implementation. Results Multiple logistic regression revealed that software type, selection steps, and certain factors influencing the purchase were related to whether the respondents felt the software improved the scheduling and financial analysis practice activities. Specifically, practices that selected electronic medical record or practice management software, that made software comparisons, or that considered prior user testimony as important were more likely to have perceived improvements in the scheduling process than were other practices. Practices that considered value important, that did not consider compatibility important, that selected managed care software, that spent less than $10,000, or that provided learning time (most dramatic increase in odds ratio, 8.2 during implementation were more likely to perceive that the software had improved the financial analysis process than were other practices. Conclusion Perhaps one of the most important predictors of improvement was providing learning time during implementation, particularly when the software involves several practice activities. Despite this importance, less than half of the practices reported performing this step.

  5. Characterizing gas shaly sandstone reservoirs using the magnetic resonance technology in the Anaco area, East Venezuela

    Energy Technology Data Exchange (ETDEWEB)

    Fam, Maged; August, Howard [Halliburton, Houston, TX (United States); Zambrano, Carlos; Rivero, Fidel [PDVSA Gas (Venezuela)

    2008-07-01

    With demand for natural gas on the rise every day, accounting for and booking every cubic foot of gas is becoming very important to operators exploiting natural gas reservoirs. The initial estimates of gas reserves are usually established through the use of petrophysical parameters normally based on wireline and/or LWD logs. Conventional logs, such as gamma ray, density, neutron, resistivity and sonic, are traditionally used to calculate these parameters. Sometimes, however, the use of such conventional logs may not be enough to provide a high degree of accuracy in determining these petrophysical parameters, which are critical to reserve estimates. Insufficient accuracy can be due to high complexities in the rock properties and/or a formation fluid distribution within the reservoir layers that is very difficult to characterize with conventional logs alone. The high degree of heterogeneity in the shaly sandstone rock properties of the Anaco area, East Venezuela, can be characterized by clean, high porosity, high permeability sands to very shaly, highly laminated, and low porosity rock. This wide variation in the reservoir properties may pose difficulties in identifying gas bearing zones which may affect the final gas reserves estimates in the area. The application of the magnetic resonance imaging (MRI) logging technology in the area, combined with the application of its latest acquisition and interpretation methods, has proven to be very adequate in detecting and quantifying gas zones as well as providing more realistic petrophysical parameters for better reserve estimates. This article demonstrates the effectiveness of applying the MRI logging technology to obtain improved petrophysical parameters that will help better characterize the shaly-sands of Anaco area gas reservoirs. This article also demonstrates the value of MRI in determining fluid types, including distinguishing between bound water and free water, as well as differentiating between gas and liquid

  6. Selecting appropriate wastewater treatment technologies using a choosing-by-advantages approach.

    Science.gov (United States)

    Arroyo, Paz; Molinos-Senante, María

    2018-06-01

    Selecting the most sustainable wastewater treatment (WWT) technology among possible alternatives is a very complex task because the choice must integrate economic, environmental, and social criteria. Traditionally, several multi-criteria decision-making approaches have been applied, with the most often used being the analytical hierarchical process (AHP). However, AHP allows users to offset poor environmental and/or social performance with low cost. To overcome this limitation, our study examines a choosing-by-advantages (CBA) approach to rank seven WWT technologies for secondary WWT. CBA results were compared with results obtained by using the AHP approach. The rankings of WWT alternatives differed, depending on whether the CBA or AHP approach was used, which highlights the importance of the method used to support decision-making processes, particularly ones that rely on subjective interpretations by experts. This paper uses a holistic perspective to demonstrate the benefits of using the CBA approach to support a decision-making process when a group of experts must come to a consensus in selecting the most suitable WWT technology among several available. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Risk-Informed Decision Making: Application to Technology Development Alternative Selection

    Science.gov (United States)

    Dezfuli, Homayoon; Maggio, Gaspare; Everett, Christopher

    2010-01-01

    NASA NPR 8000.4A, Agency Risk Management Procedural Requirements, defines risk management in terms of two complementary processes: Risk-informed Decision Making (RIDM) and Continuous Risk Management (CRM). The RIDM process is used to inform decision making by emphasizing proper use of risk analysis to make decisions that impact all mission execution domains (e.g., safety, technical, cost, and schedule) for program/projects and mission support organizations. The RIDM process supports the selection of an alternative prior to program commitment. The CRM process is used to manage risk associated with the implementation of the selected alternative. The two processes work together to foster proactive risk management at NASA. The Office of Safety and Mission Assurance at NASA Headquarters has developed a technical handbook to provide guidance for implementing the RIDM process in the context of NASA risk management and systems engineering. This paper summarizes the key concepts and procedures of the RIDM process as presented in the handbook, and also illustrates how the RIDM process can be applied to the selection of technology investments as NASA's new technology development programs are initiated.

  8. Rabbit Production in Selected Urban Areas of Southern Ghana: Status and Implications for Policy and Research

    Directory of Open Access Journals (Sweden)

    DY Osei

    2012-05-01

    Full Text Available A survey was conducted to elicit information on rabbit keeping in 26 urban areas of southern Ghana. The average age of the rabbit keepers was 44.3 years, and 95.5% of the keepers had formal education. Most of the producers got into rabbit keeping for money to meet urgent family needs, while household consumption was a major factor influencing the decision for rearing rabbits. Personal savings was the main source of income for the establishment of the rabbit enterprises. The major breeds of rabbits kept were the California White, New Zealand White and crossbreds of varied genetic variations. Backyard, small-scale and medium-scale commercial rabbit holdings were held by 18.2, 51.7 and 30.2% of the keepers respectively. The average rabbit population per farm was 77.8, with an average of 8.4 bucks, 21.6 does. Young rabbits formed 70.0% of the rabbit population. Owners of rabbitries usually cared for their animals as hired labour was expensive and often not available. High cost of feed was the most significant constraint to rabbit keeping, and mange was the most common disease affecting the rabbits. Marketing of rabbits was not organized, and this served as a disincentive to expanding the holdings. The rabbits were mostly sold either life or as fresh carcasses at the farm gate. To ensure a rapid growth of the rabbit industry, research should be undertaken to address the identified constraints to production while appropriate policies are put in place to enhance the growth of the industry. Keywords: rabbit keeping, socio-economic characteristics, farming technologies   Animal Production 14(2:131-139

  9. Technology strategy for deepwater and subsea production systems 2008 update; Technology Target Areas; TTA7 - Deep water and subsea prodution technology

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    Executive summary 'Deepwater and Subsea Production Systems' has been identified as one of the eight new Technology Target Areas (TTAs) in Norway's technology strategy for the Oil and Gas sector. This TTA covers deepwater floating production systems, subsea systems (except subsea processing technologies which are addressed by TTA6) and arctic development systems (in both shallow and deepwater). The total hydrocarbon reserves worldwide, which are enabled by the technologies under this TTA exceed 400 billion boe which, itself exceeds the proven reserves of Saudi Arabia. For deepwater developments the long term technical challenge is to develop flexible and adaptive systems which are better able to cope with subsurface uncertainties e.g. compartmentalisation and provide required access to the reservoir to enable successful recovery. More specific medium term challenges relate to developing solutions for harsh environmental conditions such as those offshore Norway and to develop cost effective methods of installing subsea hardware in deep and ultra deep water without requiring expensive crane vessels. For subsea systems the challenge is to develop solutions for ultra deepwater without increasing costs, so that Norway's leading export position in this area can be maintained and strengthened. Considering developments in the arctic, Norwegian industry is already well placed through its familiarity with arctic climate, close relationship with Russia and involvement in Sakhalin II. As we move to water depth beyond about 150m use of Gravity Base Structures (GBS) becomes very expensive or non-feasible and we need to consider other solutions. Subsea-to-beach could be an attractive solution but we need to resolve challenges related to long distance tie backs, flow assurance, uneven terrain, etc. There is also a specific need to develop floating systems capable of drilling and production in an arctic environment. To address the above technical challenges the

  10. Ship Compliance in Emission Control Areas: Technology Costs and Policy Instruments.

    Science.gov (United States)

    Carr, Edward W; Corbett, James J

    2015-08-18

    This paper explores whether a Panama Canal Authority pollution tax could be an effective economic instrument to achieve Emission Control Area (ECA)-like reductions in emissions from ships transiting the Panama Canal. This tariff-based policy action, whereby vessels in compliance with International Maritime Organisation (IMO) ECA standards pay a lower transit tariff than noncompliant vessels, could be a feasible alternative to petitioning for a Panamanian ECA through the IMO. A $4.06/container fuel tax could incentivize ECA-compliant emissions reductions for nearly two-thirds of Panama Canal container vessels, mainly through fuel switching; if the vessel(s) also operate in IMO-defined ECAs, exhaust-gas treatment technologies may be cost-effective. The RATES model presented here compares current abatement technologies based on hours of operation within an ECA, computing costs for a container vessel to comply with ECA standards in addition to computing the Canal tax that would reduce emissions in Panama. Retrofitted open-loop scrubbers are cost-effective only for vessels operating within an ECA for more than 4500 h annually. Fuel switching is the least-cost option to industry for vessels that operate mostly outside of ECA regions, whereas vessels operating entirely within an ECA region could reduce compliance cost with exhaust-gas treatment technology (scrubbers).

  11. Pipe Crawler internal piping characterization system. Deactivation and decommissioning focus area. Innovative Technology Summary Report

    International Nuclear Information System (INIS)

    1998-02-01

    Pipe Crawler reg-sign is a pipe surveying system for performing radiological characterization and/or free release surveys of piping systems. The technology employs a family of manually advanced, wheeled platforms, or crawlers, fitted with one or more arrays of thin Geiger Mueller (GM) detectors operated from an external power supply and data processing unit. Survey readings are taken in a step-wise fashion. A video camera and tape recording system are used for video surveys of pipe interiors prior to and during radiological surveys. Pipe Crawler reg-sign has potential advantages over the baseline and other technologies in areas of cost, durability, waste minimization, and intrusiveness. Advantages include potentially reduced cost, potential reuse of the pipe system, reduced waste volume, and the ability to manage pipes in place with minimal disturbance to facility operations. Advantages over competing technologies include potentially reduced costs and the ability to perform beta-gamma surveys that are capable of passing regulatory scrutiny for free release of piping systems

  12. Securing Canada’s Information-Technology Infrastructure: Context, Principles, and Focus Areas of Cybersecurity Research

    Directory of Open Access Journals (Sweden)

    Dan Craigen

    2013-07-01

    Full Text Available This article addresses the challenges of cybersecurity and ultimately the provision of a stable and resilient information-technology infrastructure for Canada and, more broadly, the world. We describe the context of current cybersecurity challenges by synthesizing key source material whose importance was informed by our own real-world experiences. Furthermore, we present a checklist of guiding principles to a unified response, complete with a set of action-oriented research topics that are linked to known operational limitations. The focus areas are used to drive the formulation of a unified and relevant research and experimental development program, thereby moving us towards a stable and resilient cyberinfrastructure. When cybersecurity is viewed as an inherently interdisciplinary problem of societal concern, we expect that fundamentally new research perspectives will emerge in direct response to domain-specific protection requirements for information-technology infrastructure. Purely technical responses to cybersecurity challenges will be inadequate because human factors are an inherent aspect of the problem. This article will interest managers and entrepreneurs. Senior management teams can assess new technical developments and product releases to fortify their current security solutions, while entrepreneurs can harness new opportunities to commercialize novel technology to solve a high-impact cybersecurity problem..

  13. Review of the factors affecting the selection and implementation of waste management technologies

    International Nuclear Information System (INIS)

    1999-08-01

    The objective of this publication is to identify and critically review the factors affecting the selection of waste management strategies and technologies; summarize and discuss the options available, and offer a systematic approach for considering these factors to design, install and operate appropriate technologies for waste streams generated. The scope of this publication includes the management of radioactive waste from all orientations including low and intermediate level waste arising from the production of radionuclides and their application in industry, agriculture, medicine, education and research; waste generated from research reactors, power reactors and from nuclear fuel cycle activities including reprocessing high level waste. Although waste from decommissioning is not specifically addressed, the management of this waste is not significantly different from other types of waste in the same category

  14. Review of the factors affecting the selection and implementation of waste management technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-08-01

    The objective of this publication is to identify and critically review the factors affecting the selection of waste management strategies and technologies; summarize and discuss the options available, and offer a systematic approach for considering these factors to design, install and operate appropriate technologies for waste streams generated. The scope of this publication includes the management of radioactive waste from all orientations including low and intermediate level waste arising from the production of radionuclides and their application in industry, agriculture, medicine, education and research; waste generated from research reactors, power reactors and from nuclear fuel cycle activities including reprocessing high level waste. Although waste from decommissioning is not specifically addressed, the management of this waste is not significantly different from other types of waste in the same category 32 refs, 11 figs, 12 tabs

  15. Selective insulin resistance in homeostatic and cognitive control brain areas in overweight and obese adults.

    Science.gov (United States)

    Kullmann, Stephanie; Heni, Martin; Veit, Ralf; Scheffler, Klaus; Machann, Jürgen; Häring, Hans-Ulrich; Fritsche, Andreas; Preissl, Hubert

    2015-06-01

    Impaired brain insulin action has been linked to obesity, type 2 diabetes, and neurodegenerative diseases. To date, the central nervous effects of insulin in obese humans still remain ill defined, and no study thus far has evaluated the specific brain areas affected by insulin resistance. In 25 healthy lean and 23 overweight/obese participants, we performed magnetic resonance imaging to measure cerebral blood flow (CBF) before and 15 and 30 min after application of intranasal insulin or placebo. Additionally, participants explicitly rated pictures of high-caloric savory and sweet food 60 min after the spray for wanting and liking. In response to insulin compared with placebo, we found a significant CBF decrease in the hypothalamus in both lean and overweight/obese participants. The magnitude of this response correlated with visceral adipose tissue independent of other fat compartments. Furthermore, we observed a differential response in the lean compared with the overweight/obese group in the prefrontal cortex, resulting in an insulin-induced CBF reduction in lean participants only. This prefrontal cortex response significantly correlated with peripheral insulin sensitivity and eating behavior measures such as disinhibition and food craving. Behaviorally, we were able to observe a significant reduction for the wanting of sweet foods after insulin application in lean men only. Brain insulin action was selectively impaired in the prefrontal cortex in overweight and obese adults and in the hypothalamus in participants with high visceral adipose tissue, potentially promoting an altered homeostatic set point and reduced inhibitory control contributing to overeating behavior. © 2015 by the American Diabetes Association. Readers may use this article as long as the work is properly cited, the use is educational and not for profit, and the work is not altered.

  16. Trace metal contents of selected seeds and vegetables from oil producing areas of Nigeria.

    Science.gov (United States)

    Wegwu, Matthew O; Omeodu, Stephen I

    2010-07-01

    The concentrations of accumulated trace metals in selected seeds and vegetables collected in the oil producing Rivers State of Nigeria were investigated. The values were compared with those of seeds and vegetables cultivated in Owerri, a less industrialized area in Nigeria. The lead (Pb) and cadmium (Cd) contents of the seeds obtained from Rivers State ranged between 0.10 and 0.23 microg/g dry weight, while those of the seeds cultivated in Owerri fell below the detection limit of 0.01 microg/g dry weight. The highest manganese (Mn) level (902 microg/g dry weight) was found in Irvingia garbonesis seeds cultivated in Rivers State. Similarly, the highest nickel (Ni) value (199 microg/g dry weight) was also obtained in I. garbonesis, however, in the seeds sampled in Owerri. The highest copper (Cu), zinc (Zn), and iron (Fe) levels (16.8, 5.27, and 26.2 microg/g dry weight, resp.) were detected in seeds collected in Rivers State. With the exception of Talinum triangulae, Ocinum gratissimum, and Piper guineese, with Pb levels of 0.09, 0.10, and 0.11 microg/g dry weight, respectively, the Pb and Cd levels in the vegetables grown in Owerri fell below the detection limit of 0.01 microg/g dry weight. The trace metal with the highest levels in all the vegetables studied was Mn, followed by Fe. The highest concentrations of Ni and Cu occurred in vegetables collected from Rivers State, while the highest level of Zn was observed in Piper guineese collected in Owerri, with a value of 21.4 microg/g dry weight. Although the trace metal concentrations of the seeds and vegetables collected in Rivers State tended to be higher than those of the seeds and vegetables grown in Owerri, the average levels of trace metals obtained in this study fell far below the WHO specifications for metals in foods.

  17. Competitive policies in the Nordic energy research and innovation area - eNERGIA : Part 2: Technology reports

    Energy Technology Data Exchange (ETDEWEB)

    Klitkou, Antje; Pedersen, Trond Einar; Scordato, Lisa; Mariussen, Aage

    2008-07-01

    This (Part 2: Technology reports) is the second report about the results from the eNERGIA project. The first report deals with the countries covered by the eNERGIA project, while the third report sums up the SWOT-analysis, the eNERGIA workshops and the case studies of good practice. A short synthesis report summarises the entire project. This second report mainly deals with selected renewable energy technologies from different perspectives. The report comprises the following nine chapters. Chapter 1 is the presentation of the selected renewable technologies (solar photovoltaic technology, wind technology, 2nd generation bio-energy technology, wave technology and hydroelectric technology) and a subsequent elaboration of the status of the technologies in the Nordic and Baltic countries. Chapter 2 gives an overview of patterns of international R&D collaboration as seen from the countries in question. Chapter 3 draws on technology specific patenting data and bibliometric data, describing the level of technology specific activity in each country. Chapter 4 and 5 describe the status of renewable energy production and renewable energy research respectively in each country. The four last chapters are relatively brief descriptions of the situation in the Nordic and Baltic countries. Chapter 6 gives an overview of the venture capital situation. Chapter 7 is about market regulations and Chapter 8 is about social concerns. Finally, Chapter 9 addresses infrastructural challenges. (Author) 77 figs., 70 tabs

  18. Project inspection using mobile technology - phase I : an investigation into existing business processes and areas for improvement using mobile technology.

    Science.gov (United States)

    2013-08-01

    As mobile technology becomes widely available and affordable, transportation agencies can use this technology to : streamline operations involved within project inspection. This research, conducted in two phases, identified : opportunities for proces...

  19. Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology.

    Science.gov (United States)

    Chen, Jianyu; Zhang, Zhiguang; Chen, Xianshuai; Zhang, Chunyu; Zhang, Gong; Xu, Zhewu

    2014-11-01

    Recently a new therapeutic concept of patient-specific implant dentistry has been advanced based on computer-aided design/computer-aided manufacturing technology. However, a comprehensive study of the design and 3-dimensional (3D) printing of the customized implants, their mechanical properties, and their biomechanical behavior is lacking. The purpose of this study was to evaluate the mechanical and biomechanical performance of a novel custom-made dental implant fabricated by the selective laser melting technique with simulation and in vitro experimental studies. Two types of customized implants were designed by using reverse engineering: a root-analog implant and a root-analog threaded implant. The titanium implants were printed layer by layer with the selective laser melting technique. The relative density, surface roughness, tensile properties, bend strength, and dimensional accuracy of the specimens were evaluated. Nonlinear and linear finite element analysis and experimental studies were used to investigate the stress distribution, micromotion, and primary stability of the implants. Selective laser melting 3D printing technology was able to reproduce the customized implant designs and produce high density and strength and adequate dimensional accuracy. Better stress distribution and lower maximum micromotions were observed for the root-analog threaded implant model than for the root-analog implant model. In the experimental tests, the implant stability quotient and pull-out strength of the 2 types of implants indicated that better primary stability can be obtained with a root-analog threaded implant design. Selective laser melting proved to be an efficient means of printing fully dense customized implants with high strength and sufficient dimensional accuracy. Adding the threaded characteristic to the customized root-analog threaded implant design maintained the approximate geometry of the natural root and exhibited better stress distribution and

  20. Sensitive Wavelengths Selection in Identification of Ophiopogon japonicus Based on Near-Infrared Hyperspectral Imaging Technology

    Directory of Open Access Journals (Sweden)

    Zhengyan Xia

    2017-01-01

    Full Text Available Hyperspectral imaging (HSI technology has increasingly been applied as an analytical tool in fields of agricultural, food, and Traditional Chinese Medicine over the past few years. The HSI spectrum of a sample is typically achieved by a spectroradiometer at hundreds of wavelengths. In recent years, considerable effort has been made towards identifying wavelengths (variables that contribute useful information. Wavelengths selection is a critical step in data analysis for Raman, NIRS, or HSI spectroscopy. In this study, the performances of 10 different wavelength selection methods for the discrimination of Ophiopogon japonicus of different origin were compared. The wavelength selection algorithms tested include successive projections algorithm (SPA, loading weights (LW, regression coefficients (RC, uninformative variable elimination (UVE, UVE-SPA, competitive adaptive reweighted sampling (CARS, interval partial least squares regression (iPLS, backward iPLS (BiPLS, forward iPLS (FiPLS, and genetic algorithms (GA-PLS. One linear technique (partial least squares-discriminant analysis was established for the evaluation of identification. And a nonlinear calibration model, support vector machine (SVM, was also provided for comparison. The results indicate that wavelengths selection methods are tools to identify more concise and effective spectral data and play important roles in the multivariate analysis, which can be used for subsequent modeling analysis.

  1. Identification of ligand-selective peptidic ActRIIB-antagonists using phage display technology

    Directory of Open Access Journals (Sweden)

    Kotaro Sakamoto

    2017-09-01

    Full Text Available ActRIIB (activin receptor type-2B is an activin receptor subtype constitutively expressed in the whole body, playing a role in cellular proliferation, differentiation, and metabolism. For its various physiological activities, ActRIIB interacts with activin and multiple other ligands including myostatin (MSTN, growth differentiation factor 11 (GDF11, and bone morphogenetic protein 9 (BMP9. Notably, the protein-protein interaction (PPI between ActRIIB and MSTN negatively controls muscular development. Therefore, this PPI has been targeted for effective treatment of muscle degenerative diseases such as muscular dystrophy and sarcopenia. Here, we report the identification of ligand-selective peptidic ActRIIB-antagonists by phage display technology. Our peptides bound to the extracellular domain of ActRIIB, inhibited PPIs between ActRIIB expressed on the cell surface and its ligands, and subsequently suppressed activation of Smad that serves as the downstream signal of the ActRIIB pathway. Interestingly, these peptidic antagonists displayed different ligand selectivities; the AR2mini peptide inhibited multiple ligands (activin A, MSTN, GDF11, and BMP9, AR9 inhibited MSTN and GDF11, while AR8 selectively inhibited MSTN. This is the first report of artificial peptidic ActRIIB-antagonists possessing ligand-selectivity.

  2. Everyday life innovation potential: when technology has to make sense. Citizens living in high-risk areas for health, using health-promoting technologies

    DEFF Research Database (Denmark)

    Madsen, Jacob Østergaard

    2014-01-01

    ) to contribute, along with other health professionals, in dealing with the problem of inequality in health. In this study health promoting technologies for adult citizens living in high risk areas of health, is chosen as one particular area of interest for occupational therapists within the field of health...

  3. Genetic structure and genetic diversity of Swietenia macrophylla in areas subjected to selective logging in Quintana Roo, Mexico

    OpenAIRE

    Alcalá, Raúl Ernesto; Cruz, Silvia De la; Gutiérrez-Granados, Gabriel

    2015-01-01

    The hypothesis that selective logging has a negative effect by altering the genetic parameters of tropical tree species was evaluated. The genetic diversity and genetic structure between adult trees (N = 47) and saplings (N = 50) of Swietenia macrophylla were contrasted within an area subjected to selective logging in the Mayan zone. Although differences in the number of alleles and in their frequencies were detected between both groups, the observed and expected heterozygosity and the coeffi...

  4. Activities of Nuclear Research Institute Rez in the area of hydrogen technologies

    International Nuclear Information System (INIS)

    Doucek, A.; Janik, L.; Misak, J.

    2010-01-01

    NRI is a research institution established in 1955. Nowadays, the Institute provides wide range of expertise and services for operators of the nuclear power plants in the Czech Republic and abroad, supports Czech central state institutions in the domains of strategic energy planning and development, management of radioactive waste (for the Ministry of Trade and Industry), provides independent expertise for the State Office of Nuclear Safety, performs activities in the area of exploitation of ionising radiation and irradiation services for basic and applied research, health service and industry, performs research and provides services for radioactive waste disposal, production of radiopharmaceuticals, education and training of experts and scientific specialists and performs many other activities. With the gradual changes in energy policy, hydrogen economy becomes one of the important topics related to nuclear energy. NRI is participating in the research and development in this area and as a member of the Czech Hydrogen Technology Platform is currently the leader in this area in the country. To promote hydrogen economy, NRI prepared and participated in several demonstration projects. Studies on production of hydrogen in current and future nuclear power plants are performed as well. (authors)

  5. Technology strategy for integrated operations and real time reservoir management; Technology Target Areas; TTA5 - Integrated operations and RTRM

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    In Norway Integrated Operations (IO) is a concept which in the first phase (G1) has been used to describe how to integrate processes and people onshore and offshore using ICT solutions and facilities that improve onshore's ability to support offshore operationally. The second generation (G2) Integrated Operations aims to help operators utilize vendors' core competencies and services more efficiently. Utilizing digital services and vendor products, operators will be able to update reservoir models, drilling targets and well trajectories as wells are drilled, manage well completions remotely, optimize production from reservoir to export lines, and implement condition-based maintenance concepts. The total impact on production, recovery rates, costs and safety will be profound. When the international petroleum business moves to the Arctic region the setting is very different from what is the case on the Norwegian Continental Shelf (NCS) and new challenges will arise. The Norwegian Ministry of Environment has recently issued an Integrated Management Plan for the Barents Sea where one focus is on 'Monitoring of the Marine Environment in the North'. The Government aims to establish a new and more coordinated system for monitoring the marine ecosystems in the north. A representative group consisting of the major Operators, the Service Industry, Academia and the Authorities have developed the enclosed strategy for the OG21 Integrated Operations and Real Time Reservoir Management (IO and RTRM) Technology Target Area (TTA). Major technology and work process research and development gaps have been identified in several areas: Bandwidth down-hole to surface; Sensor development including Nano-technology; Cross discipline use of Visualisation, Simulation and model development particularly in Drilling and Reservoir management areas; Software development in terms of data handling, model updating and calculation speed; Enabling reliable and robust communications particularly for

  6. Technology strategy for integrated operations and real time reservoir management; Technology Target Areas; TTA5 - Integrated operations and RTRM

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    In Norway Integrated Operations (IO) is a concept which in the first phase (G1) has been used to describe how to integrate processes and people onshore and offshore using ICT solutions and facilities that improve onshore's ability to support offshore operationally. The second generation (G2) Integrated Operations aims to help operators utilize vendors' core competencies and services more efficiently. Utilizing digital services and vendor products, operators will be able to update reservoir models, drilling targets and well trajectories as wells are drilled, manage well completions remotely, optimize production from reservoir to export lines, and implement condition-based maintenance concepts. The total impact on production, recovery rates, costs and safety will be profound. When the international petroleum business moves to the Arctic region the setting is very different from what is the case on the Norwegian Continental Shelf (NCS) and new challenges will arise. The Norwegian Ministry of Environment has recently issued an Integrated Management Plan for the Barents Sea where one focus is on 'Monitoring of the Marine Environment in the North'. The Government aims to establish a new and more coordinated system for monitoring the marine ecosystems in the north. A representative group consisting of the major Operators, the Service Industry, Academia and the Authorities have developed the enclosed strategy for the OG21 Integrated Operations and Real Time Reservoir Management (IO and RTRM) Technology Target Area (TTA). Major technology and work process research and development gaps have been identified in several areas: Bandwidth down-hole to surface; Sensor development including Nano-technology; Cross discipline use of Visualisation, Simulation and model development particularly in Drilling and Reservoir management areas; Software development in terms of data handling, model updating and calculation speed; Enabling reliable and robust communications

  7. Sanitation in unsewered urban poor areas: technology selection, quantitative microbial risk assessment and grey water treatment

    NARCIS (Netherlands)

    Katukiza, A.Y.

    2013-01-01

    The sanitation crisis in unsewered urban slums of cities in developing countries is one of the challenges that need to be addressed. It is caused by the high rate of urbanisation in developing countries and the increasing urban population with limited urban infrastructure. The major issues of

  8. Expertise Effects in Face-Selective Areas are Robust to Clutter and Diverted Attention, but not to Competition.

    Science.gov (United States)

    McGugin, Rankin Williams; Van Gulick, Ana E; Tamber-Rosenau, Benjamin J; Ross, David A; Gauthier, Isabel

    2015-09-01

    Expertise effects for nonface objects in face-selective brain areas may reflect stable aspects of neuronal selectivity that determine how observers perceive objects. However, bottom-up (e.g., clutter from irrelevant objects) and top-down manipulations (e.g., attentional selection) can influence activity, affecting the link between category selectivity and individual performance. We test the prediction that individual differences expressed as neural expertise effects for cars in face-selective areas are sufficiently stable to survive clutter and manipulations of attention. Additionally, behavioral work and work using event related potentials suggest that expertise effects may not survive competition; we investigate this using functional magnetic resonance imaging. Subjects varying in expertise with cars made 1-back decisions about cars, faces, and objects in displays containing one or 2 objects, with only one category attended. Univariate analyses suggest car expertise effects are robust to clutter, dampened by reducing attention to cars, but nonetheless more robust to manipulations of attention than competition. While univariate expertise effects are severely abolished by competition between cars and faces, multivariate analyses reveal new information related to car expertise. These results demonstrate that signals in face-selective areas predict expertise effects for nonface objects in a variety of conditions, although individual differences may be expressed in different dependent measures depending on task and instructions. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  9. LITERATURE REVIEWS TO SUPPORT ION EXCHANGE TECHNOLOGY SELECTION FOR MODULAR SALT PROCESSING

    International Nuclear Information System (INIS)

    King, W.

    2007-01-01

    This report summarizes the results of literature reviews conducted to support the selection of a cesium removal technology for application in a small column ion exchange (SCIX) unit supported within a high level waste tank. SCIX is being considered as a technology for the treatment of radioactive salt solutions in order to accelerate closure of waste tanks at the Savannah River Site (SRS) as part of the Modular Salt Processing (MSP) technology development program. Two ion exchange materials, spherical Resorcinol-Formaldehyde (RF) and engineered Crystalline Silicotitanate (CST), are being considered for use within the SCIX unit. Both ion exchange materials have been studied extensively and are known to have high affinities for cesium ions in caustic tank waste supernates. RF is an elutable organic resin and CST is a non-elutable inorganic material. Waste treatment processes developed for the two technologies will differ with regard to solutions processed, secondary waste streams generated, optimum column size, and waste throughput. Pertinent references, anticipated processing sequences for utilization in waste treatment, gaps in the available data, and technical comparisons will be provided for the two ion exchange materials to assist in technology selection for SCIX. The engineered, granular form of CST (UOP IE-911) was the baseline ion exchange material used for the initial development and design of the SRS SCIX process (McCabe, 2005). To date, in-tank SCIX has not been implemented for treatment of radioactive waste solutions at SRS. Since initial development and consideration of SCIX for SRS waste treatment an alternative technology has been developed as part of the River Protection Project Waste Treatment Plant (RPP-WTP) Research and Technology program (Thorson, 2006). Spherical RF resin is the baseline media for cesium removal in the RPP-WTP, which was designed for the treatment of radioactive waste supernates and is currently under construction in Hanford, WA

  10. LITERATURE REVIEWS TO SUPPORT ION EXCHANGE TECHNOLOGY SELECTION FOR MODULAR SALT PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    King, W

    2007-11-30

    This report summarizes the results of literature reviews conducted to support the selection of a cesium removal technology for application in a small column ion exchange (SCIX) unit supported within a high level waste tank. SCIX is being considered as a technology for the treatment of radioactive salt solutions in order to accelerate closure of waste tanks at the Savannah River Site (SRS) as part of the Modular Salt Processing (MSP) technology development program. Two ion exchange materials, spherical Resorcinol-Formaldehyde (RF) and engineered Crystalline Silicotitanate (CST), are being considered for use within the SCIX unit. Both ion exchange materials have been studied extensively and are known to have high affinities for cesium ions in caustic tank waste supernates. RF is an elutable organic resin and CST is a non-elutable inorganic material. Waste treatment processes developed for the two technologies will differ with regard to solutions processed, secondary waste streams generated, optimum column size, and waste throughput. Pertinent references, anticipated processing sequences for utilization in waste treatment, gaps in the available data, and technical comparisons will be provided for the two ion exchange materials to assist in technology selection for SCIX. The engineered, granular form of CST (UOP IE-911) was the baseline ion exchange material used for the initial development and design of the SRS SCIX process (McCabe, 2005). To date, in-tank SCIX has not been implemented for treatment of radioactive waste solutions at SRS. Since initial development and consideration of SCIX for SRS waste treatment an alternative technology has been developed as part of the River Protection Project Waste Treatment Plant (RPP-WTP) Research and Technology program (Thorson, 2006). Spherical RF resin is the baseline media for cesium removal in the RPP-WTP, which was designed for the treatment of radioactive waste supernates and is currently under construction in Hanford, WA

  11. Monolithic Integration of Sampled Grating DBR with Electroabsorption Modulator by Combining Selective-Area-Growth MOCVD and Quantum-Well Intermixing

    International Nuclear Information System (INIS)

    Hong-Bo, Liu; Ling-Juan, Zhao; Jiao-Qing, Pan; Hong-Liang, Zhu; Fan, Zhou; Bao-Jun, Wang; Wei, Wang

    2008-01-01

    We present the monolithic integration of a sampled-grating distributed Bragg reflector (SG-DBR) laser with a quantum-well electroabsorption modulator (QW-EAM) by combining ultra-low-pressure (55mbar) selective-area-growth (SAG) metal-organic chemical vapour deposition (MOCVD) and quantum-well intermixing (QWI) for the first time. The QW-EAM and the gain section can be grown simultaneously by using SAG MOCVD technology. Meanwhile, the QWI technology offers an abrupt band-gap change between two functional sections, which reduces internal absorption loss. The experimental results show that the threshold current Ith = 62 mA, and output power reaches 3.6mW. The wavelength tuning range covers 30nm, and all the corresponding side mode suppression ratios are over 30 dB. The extinction ratios at available wavelength channels can reach more than 14 dB with bias of -5 V

  12. Exploration and reservoir characterization; Technology Target Areas; TTA2 - Exploration and reservoir characterisation

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    In future, research within exploration and reservoir characterization will play an even more important role for Norway since resources are decreasing and new challenges like deep sea, harsh environment and last but not least environmental issues have to be considered. There are two major fields which have to be addressed within exploration and reservoir characterization: First, replacement of reserves by new discoveries and ultimate field recoveries in mature basins at the Norwegian Continental shelf, e.g. at the Halten Terrace has to be addressed. A wealth of data exists in the more mature areas. Interdisciplinary integration is a key feature of reservoir characterization, where available data and specialist knowledge need to be combined into a consistent reservoir description. A systematic approach for handling both uncertainties in data sources and uncertainties in basic models is needed. Fast simulation techniques are necessary to generate models spanning the event space, covering both underground based and model-based uncertainties. Second, exploration in frontier areas like the Barents Sea region and the deeper Voering Basin has to be addressed. The scarcity of wells in these frontier areas leads to uncertainties in the geological understanding. Basin- and depositional modelling are essential for predicting where source rocks and reservoir rocks are deposited, and if, when and which hydrocarbons are generated and trapped. Predictive models and improved process understanding is therefore crucial to meet these issues. Especially the challenges related to the salt deposits e.g. sub-salt/sub-basalt reservoir definitions in the Nordkapp Basin demands up-front research and technology developments. TTA2 stresses the need to focus on the development of new talents. We also see a strong need to push cooperation as far as possible in the present competitive environment. Projects that may require a substantial financial commitment have been identified. The following

  13. Determining the most important factors for sustainable energy technology selection in Africa: application of the Delphi technique

    CSIR Research Space (South Africa)

    Barry, M-L

    2008-04-01

    Full Text Available are economically active. Further, Africa has limited skilled human resources; thus the selection of successful, integrated technological systems is imperative. This study focused on the identification, and prioritisation, of the factors that must be taken...

  14. Radioactivity, radiological risk and metal pollution assessment in marine sediments from Calabrian selected areas, southern Italy

    Science.gov (United States)

    Caridi, F.; Messina, M.; Faggio, G.; Santangelo, S.; Messina, G.; Belmusto, G.

    2018-02-01

    The two most significant categories of physical and chemical pollutants in sediments (radionuclides and metals) were investigated in this article, in order to evaluate pollution levels in marine sediments from eight different selected sites of the Calabria region, south of Italy. In particular samples were analyzed to determine natural and anthropic radioactivity and metal concentrations, in order to assess any possible radiological hazard, the level of contamination and the possible anthropogenic impact in the investigated area. Activity concentrations of 226Ra, 232Th, 40K and 137Cs were measured by High Purity Germanium (HPGe) gamma spectrometry. The obtained results show that, for radium (in secular equilibrium with uranium), the specific activity ranges from ( 14 ± 1) Bq/kg dry weight (d.w.) to ( 54 ± 9) Bq/kg d.w.; for thorium, from ( 12 ± 1) Bq/kg d.w. to ( 83 ± 8) Bq/kg d.w.; for potassium, from ( 470 ± 20) Bq/kg d.w. to ( 1000 ± 70) Bq/kg d.w. and for cesium it is lower than the minimum detectable activity value. The absorbed gamma dose rate in air (D), the annual effective dose equivalent (AEDE) outdoor and the external hazard index ( H_ex) were calculated to evaluate any possible radiological risk, mainly due to the use of marine sediments for the beach nourishment. The results show low levels of radioactivity, thus discarding any significant radiological risk. Some metals (As, Cd, Cr tot, Hg, Ni, Pb, Cu, Zn, Mn and Fe), that could be released into the environment by both natural and anthropogenic sources, were investigated through inductively coupled plasma mass spectrometry (ICP-MS) measurements and compared with the limits set by the Italian Legislation, to assess any possible contamination. Experimental results show that they are much lower than the contamination threshold value, thus excluding their presence as pollutants. The degree of sediment contaminations were quantified using enrichment factor ( EF) and geoaccumulation index ( I geo) for

  15. Support technologies to cater for rockbursts and falls of ground in the immediate face area, volume 1.

    CSIR Research Space (South Africa)

    Daehnk, A

    2000-03-01

    Full Text Available Final Project Report Support technologies to cater for rockbursts and falls of ground in the immediate face area Volume I A. Daehnke, E. Acheampong, N. Reddy, K.B. Le Bron and A.T. Haile Research agency: CSIR Mining Technology Project number: GAP...

  16. Job Satisfaction among Information Technology Professionals in the Washington DC Area: An Analysis Based on the Minnesota Satisfaction Questionnaire

    Science.gov (United States)

    Diala, Ify S.

    2010-01-01

    Information technology (IT) has in the recent times dominated all aspect of the business world, and, for this reason, today's business environment is more challenging and more dynamic than in previous years. Therefore, this study focused on examining job satisfaction of Information Technology professionals in the D.C. area, paying particular…

  17. Final technology report for D-Area oil seepage basin bioventing optimization test, environmental restoration support

    International Nuclear Information System (INIS)

    Radway, J.C.; Lombard, K.H.; Hazen, T.C.

    1997-01-01

    One method proposed for the cleanup of the D-Area Oil Seepage Basin was in situ bioremediation (bioventing), involving the introduction of air and gaseous nutrients to stimulate contaminant degradation by naturally occurring microorganisms. To test the feasibility of this approach, a bioventing system was installed at the site for use in optimization testing by the Environmental Biotechnology Section of the Savannah River Technology Center. During the interim action, two horizontal wells for a bioventing remediation system were installed eight feet below average basin grade. Nine piezometers were also installed. In September of 1996, a generator, regenerative blower, gas cylinder station, and associated piping and nutrient injection equipment were installed at the site and testing was begun. After baseline characterization of microbial activity and contaminant degradation at the site was completed, four injection campaigns were carried out. These consisted of (1) air alone, (2) air plus triethylphosphate (TEP), (3) air plus nitrous oxide, and (4) air plus methane. This report describes results of these tests, together with conclusions and recommendations for further remediation of the site. Natural biodegradation rates are high. Oxygen, carbon dioxide, and methane levels in soil gas indicate substantial levels of baseline microbial activity. Oxygen is used by indigenous microbes for biodegradation of organics via respiration and hence is depleted in the soil gas and water from areas with high contamination. Carbon dioxide is elevated in contaminated areas. High concentrations of methane, which is produced by microbes via fermentation once the oxygen has been depleted, are found at the most contaminated areas of this site. Groundwater measurements also indicated that substantial levels of natural contaminant biodegradation occurred prior to air injection

  18. Development of the detection technology of the source area derived from nuclear activities

    International Nuclear Information System (INIS)

    Suh, Kyungsuk; Kim, Ingyu; Keum, Dongkwon; Lim, Kwangmuk; Lee, Jinyong

    2012-07-01

    - It is necessary to establish of the overall preparedness for analysis of the nuclear activities near the neighboring countries by increasing of the construction of the nuclear power plants and reprocessing facilities in China, North Korean Japan and Russia. - In Korea, the analysis and measurements for nuclear activities have been conducted, however the detection technology to find out the source area has not been developed. It is important to estimate the source origin of the radioisotope from the neighboring countries including Korea in the aspects of the surveillance and safety for the covert nuclear activities in Northeast Asia region - In this study, the data DB, treatment of the weather data and the development of connection module were conducted to track the origin of the radioisotope in the first year of the research. It had constructed the DB like the reactor types, places in China, Taiwan, Japan and Korea and the release amounts of the noble gas released into the air

  19. Development of the detection technology of the source area derived from nuclear activities

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Kyungsuk; Kim, Ingyu; Keum, Dongkwon; Lim, Kwangmuk; Lee, Jinyong

    2012-07-15

    - It is necessary to establish of the overall preparedness for analysis of the nuclear activities near the neighboring countries by increasing of the construction of the nuclear power plants and reprocessing facilities in China, North Korean Japan and Russia. - In Korea, the analysis and measurements for nuclear activities have been conducted, however the detection technology to find out the source area has not been developed. It is important to estimate the source origin of the radioisotope from the neighboring countries including Korea in the aspects of the surveillance and safety for the covert nuclear activities in Northeast Asia region - In this study, the data DB, treatment of the weather data and the development of connection module were conducted to track the origin of the radioisotope in the first year of the research. It had constructed the DB like the reactor types, places in China, Taiwan, Japan and Korea and the release amounts of the noble gas released into the air.

  20. Eutrophication assessment of the Baltic Sea Protected Areas by available data and GIS technologies.

    Science.gov (United States)

    Ranft, Susanne; Pesch, Roland; Schröder, Winfried; Boedeker, Dieter; Paulomäki, Hanna; Fagerli, Hilde

    2011-01-01

    Concerning increased degradation of marine ecosystems, there is a great political and institutional demand for an array of different tools to restore a good environmental status. Thereby, eutrophication is acknowledged as one of the major human induced stressors which has to be monitored and reduced. The present study concentrates on an assessment of the eutrophication status of the Baltic Sea Protected Areas by use of available data and GIS technologies. Two geodata layers were used for analysis: (1) a map on the eutrophication status of the Baltic Sea generated by the Helsinki Commission applying the HELCOM Eutrophication Assessment Tool (HEAT), and (2) modelled data on atmospheric nitrogen deposition made available by the European Monitoring and Evaluation Programme (EMEP). The results yielded comprehensive and conclusive data indicating that most of the BSPAs may be classified as being 'affected by eutrophication' and underlining the need to decrease the overall emissions of nutrients. Copyright © 2011 Elsevier Ltd. All rights reserved.

  1. Development Algorithm of the Technological Process of Manufacturing Gas Turbine Parts by Selective Laser Melting

    Science.gov (United States)

    Sotov, A. V.; Agapovichev, A. V.; Smelov, V. G.; Kyarimov, R. R.

    2018-01-01

    The technology of the selective laser melting (SLM) allows making products from powders of aluminum, titanium, heat-resistant alloys and stainless steels. Today the use of SLM technology develops at manufacture of the functional parts. This in turn requires development of a methodology projection of technological processes (TP) for manufacturing parts including databases of standard TP. Use of a technique will allow to exclude influence of technologist’s qualification on made products quality, and also to reduce labor input and energy consumption by development of TP due to use of the databases of standard TP integrated into a methodology. As approbation of the developed methodology the research of influence of the modes of a laser emission on a roughness of a surface of synthesized material was presented. It is established that the best values of a roughness of exemplars in the longitudinal and transversal directions make 1.98 μm and 3.59 μm respectively. These values of a roughness were received at specific density of energy 6.25 J/mm2 that corresponds to power and the speed of scanning of 200 W and 400 mm/s, respectively, and a hatch distance of 0.08 mm.

  2. Sensitivity, selectivity and stability of tin oxide nanostructures on large area arrays of microhotplates

    Science.gov (United States)

    Panchapakesan, Balaji; Cavicchi, Richard; Semancik, Steve; DeVoe, Don L.

    2006-01-01

    In this paper, the sensitivity, stability and selectivity of nanoparticle engineered tin oxide (SnO2) are reported, for microhotplate chemical sensing applications. 16 Å of metals such as nickel, cobalt, iron, copper and silver were selectively evaporated onto each column of the microhotplate array. Following evaporation, the microhotplates were heated to 500 °C and SnO2 was deposited on top of the microhotplates using a self-aligned chemical vapour deposition process. Scanning electron microscopy characterization revealed control of SnO2 nanostructures in the range of 20-121 nm. Gas sensing in seven different hydrocarbons revealed that metal nanoparticles that helped in producing faster nucleation of SnO2 resulted in smaller grain size and higher sensitivity. Sensitivity as a function of concentration and grain size is addressed for tin oxide nanostructures. Smaller grain sizes resulted in higher sensitivity of tin oxide nanostructures. Temperature programmed sensing of the devices yielded shape differences in the response between air and methanol, illustrating selectivity. Spiderweb plots were used to monitor the materials programmed selectivity. The shape differences between different gases in spiderweb plots illustrate materials selectivity as a powerful mapping approach for monitoring selectivity in various gases. Continuous monitoring in 80 ppm methanol yielded stable sensor response for more than 200 h. This comprehensive study illustrates the use of a nanoparticle engineering approach for sensitive, selective and stable gas sensing applications.

  3. Aviation System Capacity Program Terminal Area Productivity Project: Ground and Airborne Technologies

    Science.gov (United States)

    Giulianetti, Demo J.

    2001-01-01

    Ground and airborne technologies were developed in the Terminal Area Productivity (TAP) project for increasing throughput at major airports by safely maintaining good-weather operating capacity during bad weather. Methods were demonstrated for accurately predicting vortices to prevent wake-turbulence encounters and to reduce in-trail separation requirements for aircraft approaching the same runway for landing. Technology was demonstrated that safely enabled independent simultaneous approaches in poor weather conditions to parallel runways spaced less than 3,400 ft apart. Guidance, control, and situation-awareness systems were developed to reduce congestion in airport surface operations resulting from the increased throughput, particularly during night and instrument meteorological conditions (IMC). These systems decreased runway occupancy time by safely and smoothly decelerating the aircraft, increasing taxi speed, and safely steering the aircraft off the runway. Simulations were performed in which optimal trajectories were determined by air traffic control (ATC) and communicated to flight crews by means of Center TRACON Automation System/Flight Management System (CTASFMS) automation to reduce flight delays, increase throughput, and ensure flight safety.

  4. EM-50 Tanks Focus Area retrieval process development and enhancements. FY97 technology development summary report

    International Nuclear Information System (INIS)

    Rinker, M.W.; Bamberger, J.A.; Alberts, D.G.

    1997-09-01

    The Retrieval Process Development and Enhancements (RPD and E) activities are part of the US Department of Energy (DOE) EM-50 Tanks Focus Area, Retrieval and Closure program. The purpose of RPD and E is to understand retrieval processes, including emerging and existing technologies, and to gather data on these processes, so that end users have requisite technical bases to make retrieval decisions. Technologies addressed during FY97 include enhancements to sluicing, the use of pulsed air to assist mixing, mixer pumps, innovative mixing techniques, confined sluicing retrieval end effectors, borehole mining, light weight scarification, and testing of Russian-developed retrieval equipment. Furthermore, the Retrieval Analysis Tool was initiated to link retrieval processes with tank waste farms and tank geometric to assist end users by providing a consolidation of data and technical information that can be easily assessed. The main technical accomplishments are summarized under the following headings: Oak Ridge site-gunite and associated tanks treatability study; pulsed air mixing; Oak Ridge site-Old Hydrofracture Facility; hydraulic testbed relocation; cooling coil cleaning end effector; light weight scarifier; innovative tank mixing; advanced design mixer pump; enhanced sluicing; Russian retrieval equipment testing; retrieval data analysis and correlation; simulant development; and retrieval analysis tool (RAT)

  5. Integrated technology selection for energy conservation and PAHs control in iron and steel industry: Methodology and case study

    International Nuclear Information System (INIS)

    Li, Li; Lu, Yonglong; Shi, Yajuan; Wang, Tieyu; Luo, Wei; Gosens, Jorrit; Chen, Peng; Li, Haiqian

    2013-01-01

    Energy conservation and PAHs (polycyclic aromatic hydrocarbon) control are two challenges for the iron and steel industry, especially where the industry has developed at high speed. How to select appropriate technologies to improve energy efficiency and control pollution from PAHs simultaneously is encountered by both the researchers and the decision makers. This study sets up a framework on technology selection and combination which integrates technology assessment, multiple objective programming and scenario analysis. It can predict proper technology combination for different emission controls, energy conservation targets and desired levels of production. An iron and steel factory in Southwestern China is cited as a case. It is shown that stricter PAHs control will drive the transformation from process control technology to alternative smelting technology. In low PAHs limit, 25% energy reduction is a threshold. Before inclusion of a restraint on energy consumption at 25% reduction, PAHs emission is the key limiting factor for the technology selection; while after inclusion of this restraint, energy consumption becomes the key limiting factor. The desired level of production will also influence the technology selection. This study can help decision makers to select appropriate technologies to meet the PAHs control objectives and energy conservation strategies in energy-intensive industries. - Highlights: ► We predict technical strategy for energy and PAHs reduction in iron and steel mill. ► With low PAHs control objectives, process control technologies are preferable. ► With medium and high PAHs control goals, alternative smelting technology is dominate. ► In low PAHs control objective, 25% energy reduction is a threshold

  6. Selection of test and reference areas for the Indian Deepsea Environment Experiment (INDEX)

    Digital Repository Service at National Institute of Oceanography (India)

    Sharma, R.; Nath, B.N.

    50 3 50 cm and Okean grabs with camera and a sampling area of 0.25m2were used at 12–13 locations,for collecting nodule and sediment samples (Figure 1). Nod-ule abundance was estimated by dividing the weight of nodules in the sampler by its area...,and number of peaks (. 10 m) between the digitized points (Table 2).Results Nodule Distribution in Different AreasArea T1. Of the 13 sampled locations,nodule abundance at two locations was nil,and rangedbetwen 0.25 and 7.42 kg/m 2in the remaining 11 locations...

  7. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  8. Selected works of basic research on the physics and technology of accelerator driven clean nuclear power system

    International Nuclear Information System (INIS)

    Zhao Zhixiang

    2002-01-01

    38 theses are presented in this selected works of basic research on the physics and technology of accelerator driven clean nuclear power system. It includes reactor physics and experiment, accelerators physics and technology, nuclear physics, material research and partitioning. 13 abstracts, which has been presented on magazines home and abroad, are collected in the appendix

  9. Determinants of child malnutrition during the 1999 economic crisis in selected poor areas of Indonesia.

    Science.gov (United States)

    Bardosono, Saptawati; Sastroamidjojo, Soemilah; Lukito, Widjaja

    2007-01-01

    There is empirical evidence at the national level that suggests the 1999 Indonesian economic crisis impact was very heterogeneous both between urban and rural areas and across regions. A cross sectional study of the nutritional status of children and its determinants was performed in urban poor areas of Jakarta, and rural areas of Banggai in Central Sulawesi, and Alor-Rote in East Nusa Tenggara. Two-stage cluster sampling was used to obtain 1078 households with under-five children in the urban poor area of Jakarta, and 262 and 631 households with under-five children each for the rural areas of Banggai and Alor-Rote, respectively. Data collection for both studies was performed from January 1999 to June 2001. The study shows that wasting affected more children in the urban poor areas of Jakarta than in the other study areas. On the other hand, stunting and anemia were significantly more severe among children 6-59 months of age in the rural area of Alor-Rote compared to the other study areas. The high prevalence of infectious diseases was significantly related to the higher prevalence of wasting in the study areas of Jakarta and Banggai, and also significantly related to the higher prevalence of stunting and anemia in the study area of Alor-Rote. To avert this kind of health impact of a economic downturn, there is a need to improve the nutritional and health status of under-five children and their mothers through the existing health care system, provide basic health services and improve the capacity of health staff across Indonesia as part of the decentralization process.

  10. New technologies for the detection of natural and anthropic features in coastal areas

    International Nuclear Information System (INIS)

    Cappucci, Sergio; Del Monte, Maurizio; Paci, M.; Valentini, Emiliana

    2015-01-01

    Some results of the sub project GE.RI.N (Natural Resources Management) conducted in the Marine Protected Area of Egadi Islands (Western Sicily) are presented. Coastal and sea floor morphology has been investigated integrating different data sources and using remote sensing data acquired by the Ministry of Environment during the MAMPIRA Project. This approach allowed us to recognize the real extent and distribution of several rocky outcrops emerging from the sandy bottom, south of Favignana Island (known as I Pali ) , and the anthropogenic features generated by the effects of traps, trawling and anchor on the 'Posidonia oceanica' meadow that, within the Egadi Archipelago, is the largest in the Mediterranean Sea (www.ampisoleegadi.it). Unpublished and detailed characterization of the seafloor and assessment of human impacts are the main results of the present study, which demonstrate how remote sensing technologies have a great potential and relevant management implication for Marine Protected Areas and the preservation of emerged and submerged environment [it

  11. Assessing the applicability of Pb-210 dating technique in selected mangrove areas in the Philippines

    International Nuclear Information System (INIS)

    Sta Maria, E.J.; Lim, A.B.U.; Ebreo, C.M.H.; Ramirez, J.D.; Castro, K.M.I.; Garcia, M.C.C.; Navarette, I.A.; Salmo, S.G. III

    2015-01-01

    The Pb-210 dating technique has been widely used in many areas as a tool for historical reconstruction of pollution, eutrophication and the many impacts of man on the environment. In the Philippines, the technique has been used in bays (Manila Bay, Sorsogon Bay), in a sound, in a lagoon, in a lake and in a dam. To assess the technique’s applicability in a different environmental setting, sediment cores were collected from mangrove areas in Subic and Pangasinan for Pb-210 analysis. Initial Pb-210 results from these two mangrove areas reveals that Pb-210 is a promising tool for such a new setting. Using the Pb-210 profiles of the sediment cores indicated that Pangasinan mangrove area has a much lower sedimentation rate compared to the Subic mangrove area. The difference in the sediment rates of the two areas could be due to the existing topographic, geographic, hydrodynamic and environment conditions of the area. The age-control information provided by the Pb-210 data could be correlated with other existing data (Chemical and elemental data) for retrospective assessment of the study areas. (author)

  12. An optimization approach to selecting research natural areas in National Forests

    Science.gov (United States)

    Stephanie A. Snyder; Lucy E. Tyrrell; Robert G. Haight

    1999-01-01

    The USDA Forest Service has a long-established program to identify areas in national forests for designation as protected Research Natural Areas (RNAs). One of the goals is to protect high quality examples of regional ecosystems for the purposes of maintaining biological diversity, conducting nonmanipulative research and monitoring, and fostering education. When RNA...

  13. Geologic facts for priority site selection in the area west of Simpevarp. Reports 1-4

    International Nuclear Information System (INIS)

    Wahlgren, Carl-Henric; Persson, Lena; Danielsson, Peter; Berglund, Johan; Triumf, Carl-Axel; Mattsson, Haakan; Thunehed, Hans

    2003-03-01

    The area west of Simpevarp at Oskarshamn is a candidate site for the Swedish repository for high-level radioactive waste. Since the available information of geologic structures in the area is not very detailed, measurements and interpretation of existing data have been performed in order to find inhomogeneities and local lineaments. Surveys were made air and by geophysical measurements in the field

  14. Geophysical borehole logging in selected areas in the Greater Accra plains and the Densu river basin

    International Nuclear Information System (INIS)

    Amartey, E. A.

    2009-06-01

    Geophysical borehole logging was complemented by Vertical Electrical Sounding (VES) method to study fractured bedrock aquifer systems on the compounds of Ghana Atomic Energy Commission (GAEC), Water Research Institute (WRI) in the Accra Plains and the Hydrometric Station of the Department of Geology, University of Ghana at Buokrom in the Densu River Basin. Single-point resistance, resistivity and natural gamma logging in a total of nine boreholes were conducted to identify and characterize the various aquifers in the study areas. Results obtained from the single-point resistance and resistivity logs showed clearly the characteristics of water-bearing fracture zones in the various rock formations. The gamma logs obtained for each area were correlated to form hydrostratigraphic units to establish potential zones of high water-bearing fractures. VES modeled curves shows hydrogeological units of the geological formation which compares well with features obtained on the logs. The investigation identified fractured zone thicknesses of <1 m to 2 m at GAEC area, <1 m to 9 m at WRI area and <1 m to 10 m thicknesses at the Buokrom area. The fractured bedrock aquifers identified have been characterized based on their thicknesses as follows. Five minor (thickness < 5 m), two medium (thickness 5 m to 14 m) and three major (thickness ⩾15 m) fractures were identified at the GAEC area. At the WRI area three minor and five medium fractures were identified. Also four minor and five medium fractures were identified for the Buokrom area boreholes. (au)

  15. Seroprevalence of brucellosis in cattle and selected wildlife species at selected livestock/wildlife interface areas of the Gonarezhou National Park, Zimbabwe.

    Science.gov (United States)

    Ndengu, Masimba; Matope, Gift; de Garine-Wichatitsky, Michel; Tivapasi, Musavengana; Scacchia, Massimo; Bonfini, Barbara; Pfukenyi, Davis Mubika

    2017-10-01

    A study was conducted to investigate seroprevalence and risk factors for Brucella species infection in cattle and some wildlife species in communities living at the periphery of the Great Limpopo Transfrontier Conservation Area in south eastern Zimbabwe. Three study sites were selected based on the type of livestock-wildlife interface: porous livestock-wildlife interface (unrestricted); non-porous livestock-wildlife interface (restricted by fencing); and livestock-wildlife non-interface (totally absent or control). Sera were collected from cattle aged≥2years representing both female and intact male animals. Sera were also collected from selected wild ungulates from Mabalauta (porous interface) and Chipinda (non-interface) areas of the Gonarezhou National Park. Samples were screened for Brucellaantibodies using the Rose Bengal plate test and confirmed by the complement fixation test. Data were analysed by descriptive statistics and multivariate logistic regression modelling. In cattle, brucellosis seroprevalence from all areas was 16.7% (169/1011; 95% CI: 14.5-19.2%). The porous interface recorded a significantly (p=0.03) higher seroprevalence (19.5%; 95% CI: 16.1-23.4%) compared to the non-interface area (13.0%; 95% CI: 9.2-19.9%).The odds of Brucellaseropositivity increased progressively with parity of animals and were also three times higher (OR=3.0, 2.0wildlife and livestock. Copyright © 2017. Published by Elsevier B.V.

  16. The importance of cooperation and support for technology start-ups : a comparison of the Eindhoven and Darmstadt areas

    NARCIS (Netherlands)

    Halman, J.I.M.; Ulijn, J.M.; Vrande, van de V.J.A.; Umbach, F.; Ulijn, J.M.; Drillon, D.

    2007-01-01

    In Chapter 7, 'The importance of cooperation and support for technology start-ups: a comparison of the Eindhoven and Darmstadt areas', Johannes Halman, Jan Ulijn, Vareska van de Vrande and Frank Umbach show the results of a survey that was held among high-tech start-ups in the Eindhoven area ill the

  17. SITE SELECTION OF MUNICIPAL SOLID WASTE LANDFILLS USING ANALYTICAL HIERARCHY PROCESS METHOD IN A GEOGRAPHICAL INFORMATION TECHNOLOGY ENVIRONMENT IN GIROFT

    Directory of Open Access Journals (Sweden)

    H. Javaheri, T. Nasrabadi, M. H. Jafarian, G. R. Rowshan, H. Khoshnam

    2006-07-01

    Full Text Available Municipal solid waste generation is among the most significant sources which threaten the global environmental health. As an ideal selection depends on considering several independent factors concerning land use, socio economy and hydrogeology, the use of a multi criteria evaluation method seems inevitable. Taking benefit of geographic information system as a tool in combination with geographical information technology, equips the spatial decision support systems in appropriate site selection of sanitary landfills. The present study involves a kind of multi criteria evaluation method under the name of weighted linear combination by using geographical information technology as a practical instrument to evaluate the suitability of the vicinity of Giroft city in Kerman province of Iran for landfill. Water permeability, slope, distance from rivers, depth of underground watertable, distance from residential areas, distance from generation centers, general environmental criterion and distance from roads are the criteria which have been taken in to consideration in the process of analyzing. Superposing all of the raster type layers including geomorphologic, hydrologic, humanistic and land use criteria in land suitability, the final zoning of appropriate, fairly appropriate and inappropriate districts have been identified. Considering relative priority of all criteria in comparison with others, a specific weight is designated to each criterion according to their total influence on the whole process of decision making. The results from the application of the presented methodology are zones for landfill with varying zonal land suitability. Finally the zones will be ranked in descending order to indicate the priority of different options in front of the eyes of decision makers. The results achieved by this study may help policy makers of Giroft city by a variety of options for being considered as sanitary landfill locations.

  18. Application effect of TEM sounding survey on prospecting and target area selection of sandstone-type uranium deposits

    International Nuclear Information System (INIS)

    He Jianguo; Liang Shanming; Zhao Cuiping

    2006-01-01

    Based on the results of transient electromagnetic (TEM) sounding survey during recent years regional geological reconnaissance with drilling (1:250000), the application effect of TEM sounding survey during regional reconnaissance is summarized in this paper. It is suggested that the data of TEM sounding are useful in judging hydrodynamic conditions of groundwater and determining favorable areas for uranium ore-formation; TEM sounding in large areas may be proper for prospecting in gobi-desert areas and be beneficial for regional reconnaissance and target area selection, and may reduce the target area and provide basis for further drilling program. It is of popularized significance in the prospecting for sandstone-type uranium deposits. (authors)

  19. Research on Methods of High Coherent Target Extraction in Urban Area Based on Psinsar Technology

    Science.gov (United States)

    Li, N.; Wu, J.

    2018-04-01

    PSInSAR technology has been widely applied in ground deformation monitoring. Accurate identification of Persistent Scatterers (PS) is key to the success of PSInSAR data processing. In this paper, the theoretic models and specific algorithms of PS point extraction methods are summarized and the characteristics and applicable conditions of each method, such as Coherence Coefficient Threshold method, Amplitude Threshold method, Dispersion of Amplitude method, Dispersion of Intensity method, are analyzed. Based on the merits and demerits of different methods, an improved method for PS point extraction in urban area is proposed, that uses simultaneously backscattering characteristic, amplitude and phase stability to find PS point in all pixels. Shanghai city is chosen as an example area for checking the improvements of the new method. The results show that the PS points extracted by the new method have high quality, high stability and meet the strong scattering characteristics. Based on these high quality PS points, the deformation rate along the line-of-sight (LOS) in the central urban area of Shanghai is obtained by using 35 COSMO-SkyMed X-band SAR images acquired from 2008 to 2010 and it varies from -14.6 mm/year to 4.9 mm/year. There is a large sedimentation funnel in the cross boundary of Hongkou and Yangpu district with a maximum sedimentation rate of more than 14 mm per year. The obtained ground subsidence rates are also compared with the result of spirit leveling and show good consistent. Our new method for PS point extraction is more reasonable, and can improve the accuracy of the obtained deformation results.

  20. SELECTED ASPECTS OF THE IMPLEMENTATION OF ACTIVE MARKETING CAMPAIGN TO RAISE AWARENESS AND PROMOTE PUBLIC TRANSPORT SERVICES IN RURAL AREAS

    Directory of Open Access Journals (Sweden)

    Katarzyna NOSAL

    2016-09-01

    Full Text Available The article presents selected aspects of the implementation of the EU’s SmartMove project, which aims to promote feeder public transport systems in rural areas through the implementation of an active marketing campaign (AMC. Campaigns of this type are connected with providing general and personalized information concerning the functioning of public transport services. In the article, characteristics of one of the implementation areas of the project are presented, namely, the Liszki district near Cracow. Transport services were also evaluated. In addition, selected results are presented from a survey that was conducted among residents of the area from the point of view of the implementation of the AMC. The results concerned data about the means of transport that were currently used for travelling, the knowledge of bus services, the reasons for their use and the factors that might encourage residents to use public transport

  1. A survey of Japanese quail (Coturnix coturnix japonica farming in selected areas of Bangladesh

    Directory of Open Access Journals (Sweden)

    Abu Nasar Md. Aminoor Rahman

    2016-09-01

    Full Text Available Aim: To investigate the status, problems and prospects of Japanese quail (Coturnix coturnix japonica farming in selected areas of Bangladesh. Materials and Methods: The study was conducted in 14 districts of Bangladesh, viz., Dhaka, Narayanganj, Munshiganj, Mymensingh, Netrakona, Faridpur, Jessore, Khulna, Satkhira, Kushtia, Bogra, Naogaon, Comilla, and Sylhet during the period from July 2011 to June 2012. A total of 52 quail farmers were interviewed for data collection using a structured questionnaire. Focus group discussions were also carried out with unsuccessful farmers and those want to start quail farming. Workers of quail farms, quail feeds and medicine suppliers, quail eggs and meat sellers were also interviewed regarding the issue. Results: Out of 52 farms, 86.5% were operated by male, 67.3% farmers did not receive any training and 92.3% farmers had no earlier experience of quail farming although 58.0% farmers primary occupation was quail farming. Most of the farms (63.4% were mixed in type having ≤5000 birds of two or three varieties. About 80.7% farms were operated separately round the year with no other poultry and 83.0% farmers wanted to expand their farming. The average pullet weight 14.5±0.12, 11.0±0.07, 12.0±0.22, and 12.8±0.17 g; age at the first lay 46.0±0.04, 42.0±0.31, 42.0±0.09, and 45.2±0.05 days; rearing period 15.0±0.01, 12.0±0.14, 15.0±0.32, and 15.2±0.18 months; culling period 15.5±0.14, 13.0±0.06, 15.0±0.03, and 15.4±0.26 months were for layer, parent stock, hatchery, and mixed farms, respectively. Most of the layer farms had an average egg production of ≤5000/day and net profit BDT 0.75/egg. However, an average number of birds, hatchability and net profit per day-old-chick were ≤5000, 76.8% and BDT 2.75, respectively, in the hatchery. Broiler quails were sold at 30 days with mean weight of 110.8 g and net profit BDT 9.02/bird. The major constraints of quail farming were higher feed price

  2. A survey of Japanese quail (Coturnix coturnix japonica) farming in selected areas of Bangladesh.

    Science.gov (United States)

    Nasar, Abu; Rahman, Aminoor; Hoque, Nazmul; Kumar Talukder, Anup; Das, Ziban Chandra

    2016-09-01

    To investigate the status, problems and prospects of Japanese quail (Coturnix coturnix japonica) farming in selected areas of Bangladesh. The study was conducted in 14 districts of Bangladesh, viz., Dhaka, Narayanganj, Munshiganj, Mymensingh, Netrakona, Faridpur, Jessore, Khulna, Satkhira, Kushtia, Bogra, Naogaon, Comilla, and Sylhet during the period from July 2011 to June 2012. A total of 52 quail farmers were interviewed for data collection using a structured questionnaire. Focus group discussions were also carried out with unsuccessful farmers and those want to start quail farming. Workers of quail farms, quail feeds and medicine suppliers, quail eggs and meat sellers were also interviewed regarding the issue. Out of 52 farms, 86.5% were operated by male, 67.3% farmers did not receive any training and 92.3% farmers had no earlier experience of quail farming although 58.0% farmers primary occupation was quail farming. Most of the farms (63.4%) were mixed in type having ≤5000 birds of two or three varieties. About 80.7% farms were operated separately round the year with no other poultry and 83.0% farmers wanted to expand their farming. The average pullet weight 145.0±0.12, 110.0±0.07, 120.0±0.22, and 128.0±0.17 g; age at the first lay 46.0±0.04, 42.0±0.31, 42.0±0.09, and 45.2±0.05 days; rearing period 15.0±0.01, 12.0±0.14, 15.0±0.32, and 15.2±0.18 months; culling period 15.5±0.14, 13.0±0.06, 15.0±0.03, and 15.4±0.26 months were for layer, parent stock, hatchery, and mixed farms, respectively. Most of the layer farms had an average egg production of ≤5000/day and net profit BDT 0.75/egg. However, an average number of birds, hatchability and net profit per day-old-chick were ≤5000, 76.8% and BDT 2.75, respectively, in the hatchery. Broiler quails were sold at 30 days with mean weight of 110.8 g and net profit BDT 9.02/bird. The major constraints of quail farming were higher feed price, outbreak of endemic diseases, lack of proper knowledge

  3. Technology demonstration: geostatistical and hydrologic analysis of salt areas. Assessment of effectiveness of geologic isolation systems

    International Nuclear Information System (INIS)

    Doctor, P.G.; Oberlander, P.L.; Rice, W.A.; Devary, J.L.; Nelson, R.W.; Tucker, P.E.

    1982-09-01

    The Office of Nuclear Waste Isolation (ONWI) requested Pacific Northwest Laboratory (PNL) to: (1) use geostatistical analyses to evaluate the adequacy of hydrologic data from three salt regions, each of which contains a potential nuclear waste repository site; and (2) demonstrate a methodology that allows quantification of the value of additional data collection. The three regions examined are the Paradox Basin in Utah, the Permian Basin in Texas, and the Mississippi Study Area. Additional and new data became available to ONWI during and following these analyses; therefore, this report must be considered a methodology demonstration here would apply as illustrated had the complete data sets been available. A combination of geostatistical and hydrologic analyses was used for this demonstration. Geostatistical analyses provided an optimal estimate of the potentiometric surface from the available data, a measure of the uncertainty of that estimate, and a means for selecting and evaluating the location of future data. The hydrologic analyses included the calculation of transmissivities, flow paths, travel times, and ground-water flow rates from hypothetical repository sites. Simulation techniques were used to evaluate the effect of optimally located future data on the potentiometric surface, flow lines, travel times, and flow rates. Data availability, quality, quantity, and conformance with model assumptions differed in each of the salt areas. Report highlights for the three locations are given

  4. Post-release habitats’ selection of Capreolus capreolus italicus (Festa, 1925 in a protected area in southern Italy

    Directory of Open Access Journals (Sweden)

    Giovanni Argenti

    2015-01-01

    Full Text Available The purpose of this study was to analyze the post-release behavior of individuals of Capreolus capreolus italicus (Festa 1925 and to evaluate the influence of environmental and vegetation characteristics on habitat selection by monitored animals. With these aims, 14 individuals of roe deer (a sample of 75 animals released in total, differentiated by age and sex, were caught in areas of southern Tuscany (central Italy and released in suitable areas of the Aspromonte National Park (Calabria, southern Italy. Each animal was monitored by GPS-GSM tracking radio collar (Vectronics ® with frequency of location ranging from 30 minutes (in the first month to 6 hours (later, and covering a period ranging from 90 to 563 days. Each fix, reported in a GIS environment, was analyzed to get information on habitat selection performed by tracked animals. Data collection implemented forest area, herbaceous resources characterization and the evaluation of possible visual refuge offered to the animals by the environment, to assess the effect of these attributes on the selection of grounds. Results showed that the choice of a particular habitat is highly correlated with forests’ characteristics, the areas covered by conifers and with height of crown insertion between 1 and 2 m, generally with absence of regeneration, being clearly preferred. Most attended herbaceous areas are those with a high presence of grasses and with a high pastoral value. Visual refuge affects also remarkably the selection of habitats by animals. The study showed that the observed parameters can provide a good basis for the validation of the model used for the feasibility study and to identify the optimal characteristics of the areas for future releases.

  5. Scientific and technological capabilities in health-related areas: opportunities, challenges, and interactions with the industrial sector.

    Science.gov (United States)

    Vargas, Marco Antonio; Britto, Jorge

    2016-11-03

    Characterization of the scientific and technological infrastructure in health and its interactions with the industrial sector provides key elements for understanding the dynamics of innovation in health. This study conducts an exploratory analysis of the potentialities and limitations associated with scientific and technological capabilities in the health area in Brazil and the different links between the scientific and industrial sectors in health. The analysis points to important growth in internationally indexed research output, especially in certain areas such as pharmaceutics, public health, genetics, morphology, physiology, and microbiology. There has also been important growth in research groups that interact with the industrial sector in selected areas of health. The study highlights the importance of building more solid and permanent bridges between companies, research institutions, and the health system, linking the knowledge developed in research institutions to the dynamics of the industrial sector in health. Resumo: A caracterização da infraestrutura científica e tecnológica na área da saúde e das suas formas de articulação com a base produtiva representam elementos centrais na compreensão da dinâmica de inovação em saúde. Este estudo faz uma análise exploratória sobre as potencialidades e limitações associadas às capacitações científicas e tecnológicas na área da saúde no Brasil e as formas de articulação entre a base científica e a base produtiva em saúde. A análise aponta para o crescimento expressivo da produção bibliográfica com circulação internacional no campo da saúde, particularmente em determinadas áreas como farmácia, saúde coletiva, genética, morfologia, fisiologia e microbiologia. Além disso, observa-se um crescimento expressivo dos grupos de pesquisa com relacionamentos com o setor produtivo em áreas selecionadas da saúde. Destaca-se a importância da construção de pontes mais sólidas e

  6. Dynamics of a broad-area diode laser with lateral-mode-selected long-cavity feedback

    DEFF Research Database (Denmark)

    Chi, Mingjun; Petersen, Paul Michael

    2014-01-01

    The temporal dynamics of a broad-area diode laser with lateral-mode-selected long-cavity feedback is studied experimentally. Different dynamics are observed when different lateral modes are selected. When the feedback mirror is aligned perfectly and high-order modes are selected, in most....... When the feedback mirror is aligned non-perfectly, pulse-package oscillation is observed, for the first time to our knowledge, in a diode laser with long-cavity feedback....... of the cases, the output of the laser shows a periodic oscillation corresponding to a single roundtrip external-cavity loop, but the dynamic behavior disappears in some case; when the zero-order lateral-mode is selected, periodic oscillation corresponding to a double roundtrip external-cavity loop is observed...

  7. Factoring attitudes towards armed conflict risk into selection of protected areas for conservation

    DEFF Research Database (Denmark)

    Hammill, E.; Tulloch, A.I.T.; Possingham, H.P.

    2016-01-01

    The high incidence of armed conflicts in biodiverse regions poses significant challenges in achieving international conservation targets. Because attitudes towards risk vary, we assessed different strategies for protected area planning that reflected alternative attitudes towards the risk of arme...... that achieving biodiversity targets in volatile regions will require greater initial investment and benefit from fine-resolution estimates of conflict risk.......The high incidence of armed conflicts in biodiverse regions poses significant challenges in achieving international conservation targets. Because attitudes towards risk vary, we assessed different strategies for protected area planning that reflected alternative attitudes towards the risk of armed...... conflicts. We find that ignoring conflict risk will deliver the lowest return on investment. Opting to completely avoid conflict-prone areas offers limited improvements and could lead to species receiving no protection. Accounting for conflict by protecting additional areas to offset the impacts of armed...

  8. Integrated chemical and biological assessment of contaminant impacts in selected European coastal and offshore marine areas

    NARCIS (Netherlands)

    Hylland, Ketil; Robinson, Craig D.; Burgeot, Thierry; Martínez-Gómez, Concepción; Lang, Thomas; Svavarsson, Jörundur; Thain, John E.; Vethaak, A. Dick; Gubbins, Mattew J.

    This paper reports a full assessment of results from ICON, an international workshop on marine integrated contaminant monitoring, encompassing different matrices (sediment, fish, mussels, gastropods), areas (Iceland, North Sea, Baltic, Wadden Sea, Seine estuary and the western Mediterranean) and

  9. Factoring attitudes towards armed conflict risk into selection of protected areas for conservation.

    Science.gov (United States)

    Hammill, E; Tulloch, A I T; Possingham, H P; Strange, N; Wilson, K A

    2016-03-30

    The high incidence of armed conflicts in biodiverse regions poses significant challenges in achieving international conservation targets. Because attitudes towards risk vary, we assessed different strategies for protected area planning that reflected alternative attitudes towards the risk of armed conflicts. We find that ignoring conflict risk will deliver the lowest return on investment. Opting to completely avoid conflict-prone areas offers limited improvements and could lead to species receiving no protection. Accounting for conflict by protecting additional areas to offset the impacts of armed conflicts would not only increase the return on investment (an effect that is enhanced when high-risk areas are excluded) but also increase upfront conservation costs. Our results also demonstrate that fine-scale estimations of conflict risk could enhance the cost-effectiveness of investments. We conclude that achieving biodiversity targets in volatile regions will require greater initial investment and benefit from fine-resolution estimates of conflict risk.

  10. A framework for selecting suitable control technologies for nuclear power plant systems

    International Nuclear Information System (INIS)

    Kisner, R.A.

    1992-01-01

    New concepts continue to emerge for controlling systems, subsystems, and components and for monitoring parameters, characteristics, and vital signs in nuclear power plants. The steady stream of new control theories and the evolving state of control software exacerbates the difficulty of selecting the most appropriate control technology for nuclear power plant systems. As plant control room operators increase their reliance on computerized systems, the integration of monitoring, diagnostic, and control functions into a uniform and understandable environment becomes imperative. A systematic framework for comparing and evaluating the overall usefulness of control techniques is needed. This paper describes nine factors that may be used to evaluate alternative control concepts. These factors relate to a control system's potential effectiveness within the context of the overall environment, including both human and machine components. Although not an in-depth study, this paper serves to outline an evaluation framework based on several measures of utility. 32 refs

  11. MicroCHP: Overview of selected technologies, products and field test results

    Energy Technology Data Exchange (ETDEWEB)

    Kuhn, Vollrad [Berliner Energieagentur GmbH, Franzoesische Strasse 23, 10117 Berlin (Germany); Klemes, Jiri; Bulatov, Igor [Centre for Process Integration, CEAS, The University of Manchester, P.O. Box 88, M60 1QD Manchester (United Kingdom)

    2008-11-15

    This paper gives an overview on selected microCHP technologies and products with the focus on Stirling and steam machines. Field tests in Germany, the UK and some other EC countries are presented, assessed and evaluated. Test results show the overall positive performance with differences in sectors (domestic vs. small business). Some negative experiences have been received, especially from tests with the Stirling engines and the free-piston steam machine. There are still obstacles for market implementation. Further projects and tests of microCHP are starting in various countries. When positive results will prevail and deficiencies are eliminated, a way to large-scale production and market implementation could be opened. (author)

  12. Comparative economic performance of selected passive solar heating and cooling technologies

    Science.gov (United States)

    Rutter, W.

    1981-05-01

    The economic performance of selected passive solar heating and cooling technologies which incorporate energy storage is assessed by using a set of uniform assumptions and methodologies. Where data are available, a given system is assessed at more than one geographical location. Results are obtained in the form of both payback period and net present value for residential applications, and in terms of net present value only for industrial/commercial uses. Results indicate that ventilated trombe walls, solar roof ponds, and certain night effect/floor storage strategies are cost effective, but night effect/rock bed cooling is not. Results also show that, although direct gain out-performs trombe walls in most parts of the country, both direct gain and trombe walls usually produce a net savings in the residential sector. Generally, however, tax regulations result in net economic loss for direct gain and trombe walls used to heat industrial and commercial buildings.

  13. Research on the mechanical behaviour of an airplane component made by selective laser melting technology

    Directory of Open Access Journals (Sweden)

    Păcurar Răzvan

    2017-01-01

    Full Text Available The main objective of the presented research consists in the redesign of an airplane component to decrease its weight, without affecting the mechanical behaviour of the component, at the end. Femap NX Nastran and ANSYS FEA programs were used for the shape optimization and for the estimation of the mechanical behaviour of a fixing clamp that was used to sustain the hydraulic pipes that are passing through an airplane fuselage, taking into consideration two types of raw materials – Ti6Al4V and AlSi12 powder from which this component could be manufactured by using the selective laser melting (SLM technology. Based on the obtained results, the airplane component was finally manufactured from titanium alloy using the SLM 250 HL equipment that is available at SLM Solutions GmbH company from Luebeck, in Germany.

  14. Bioactive treatment promotes osteoblast differentiation on titanium materials fabricated by selective laser melting technology.

    Science.gov (United States)

    Tsukanaka, Masako; Fujibayashi, Shunsuke; Takemoto, Mitsuru; Matsushita, Tomiharu; Kokubo, Tadashi; Nakamura, Takashi; Sasaki, Kiyoyuki; Matsuda, Shuichi

    2016-01-01

    Selective laser melting (SLM) technology is useful for the fabrication of porous titanium implants with complex shapes and structures. The materials fabricated by SLM characteristically have a very rough surface (average surface roughness, Ra=24.58 µm). In this study, we evaluated morphologically and biochemically the specific effects of this very rough surface and the additional effects of a bioactive treatment on osteoblast proliferation and differentiation. Flat-rolled titanium materials (Ra=1.02 µm) were used as the controls. On the treated materials fabricated by SLM, we observed enhanced osteoblast differentiation compared with the flat-rolled materials and the untreated materials fabricated by SLM. No significant differences were observed between the flat-rolled materials and the untreated materials fabricated by SLM in their effects on osteoblast differentiation. We concluded that the very rough surface fabricated by SLM had to undergo a bioactive treatment to obtain a positive effect on osteoblast differentiation.

  15. Identifying and assessing ecotourism visitor impacts at selected protected areas in Costa Rica and Belize

    Science.gov (United States)

    Farrell, T.A.; Marion, J.L.

    2001-01-01

    Protected area visitation is an important component of ecotourism, and as such, must be sustainable. However, protected area visitation may degrade natural resources, particularly in areas of concentrated visitor activities like trails and recreation sites. This is an important concern in ecotourism destinations such as Belize and Costa Rica, because they actively promote ecotourism and emphasize the pristine qualities of their natural resources. Research on visitor impacts to protected areas has many potential applications in protected area management, though it has not been widely applied in Central and South America. This study targeted this deficiency through manager interviews and evaluations of alternative impact assessment procedures at eight protected areas in Belize and Costa Rica. Impact assessment procedures included qualitative condition class systems, ratings systems, and measurement-based systems applied to trails and recreation sites. The resulting data characterize manager perceptions of impact problems, document trail and recreation site impacts, and provide examples of inexpensive, efficient and effective rapid impact assessment procedures. Interview subjects reported a variety of impacts affecting trails, recreation sites, wildlife, water, attraction features and other resources. Standardized assessment procedures were developed and applied to record trail and recreation site impacts. Impacts affecting the study areas included trail proliferation, erosion and widening, muddiness on trails, vegetation cover loss, soil and root exposure, and tree damage on recreation sites. The findings also illustrate the types of assessment data yielded by several alternative methods and demonstrate their utility to protected area managers. The need for additional rapid assessment procedures for wildlife, water, attraction feature and other resource impacts was also identified.

  16. Appendix P: analysis of geological and geophysical data in selected areas of the North Pacific

    International Nuclear Information System (INIS)

    Hayes, D.E.; Damuth, J.E.; Jacobi, R.D.

    1981-01-01

    During 1979 we initiated a comprehensive assessment of existing marine geological and geophysical data for the northwest Pacific (PAC 1; 20 0 to 50 0 N; 145 0 to 180 0 E). The purpose of these studies is to locate, if possible, several 1 0 x 1 0 (latitude x longitude) areas which may qualify as candidate waste-disposal sites. Some of these 1 0 x 1 0 sites will then be surveyed in detail on future cruises. We have examined all 3.5 and 12 kHz echogram data through the PAC 1 area contained in the Lamont-Doherty, Scripps, and Univ. of Hawaii echogram libraries. These data comprise the vast majority of data that exist for the northwest Pacific. Using these data we were able to classify and map the distribution of various types of microtopography and acoustic reflectivity (echo character) throughout the PAC 1 area. These studies revealed (1) the nature of stratification in the upper 25 to 100 m of the sea floor; (2) nature of the microtopography of the sea floor and areal distribution of basement outcrops; (3) locations of areas affected by bottom currents and mass-wasting process. We have also compiled and evaluated all D.S.D.P. drilling information and L-DGO piston core, bottom camera, heat-flow, sonobuoy, and low frequency seismic-reflection data for the PAC 1 area. We are continuing to compile additional acoustic and station data from other sources including US Navy, NOAA, Japan, and N.G.S.D.C., DMA. Our studies in the PAC 1 area to date have enabled us to locate at least 10 1 0 x 1 0 areas which appear to be potentially suitable sites for further waste disposal studies. Three of these potential sites will be surveyed in detail on an upcoming VEMA cruise in spring 1980. Remaining areas will be surveyed during future cruises

  17. Dynamic behaviors of a broad-area diode laser with lateral-mode-selected external feedback

    DEFF Research Database (Denmark)

    Chi, Mingjun; Petersen, Paul Michael

    2014-01-01

    In this paper, we investigate the dynamics of a BAL with lateral-mode selected external feedback experimentally by measuring the far-field profile, intensity noise spectrum and time series of the output beam. The mode-selection is achieved by adjusting a stripe mirror at the pseudo far-field plan...... with a frequency of the single roundtrip external-cavity loop modulated by periodic low-frequency fluctuation. This is the first observation of pulse-package oscillation in a diode laser with long-cavity feedback, to our knowledge....

  18. Applied information science, engineering and technology selected topics from the field of production information engineering and IT for manufacturing : theory and practice

    CERN Document Server

    Tóth, Tibor

    2014-01-01

    The objective of the book is to give a selection from the papers, which summarize several important results obtained within the framework of the József Hatvany Doctoral School operating at the University of Miskolc, Hungary. In accordance with the three main research areas of the Doctoral School established for Information Science, Engineering and Technology, the papers can be classified into three groups. They are as follows: (1) Applied Computational Science; (2) Production Information Engineering (IT for Manufacturing included); (3) Material Stream Systems and IT for Logistics. As regards the first area, some papers deal with special issues of algorithms theory and its applications, with computing algorithms for engineering tasks, as well as certain issues of data base systems and knowledge intensive systems. Related to the second research area, the focus is on Production Information Engineering with special regard to discrete production processes. In the second research area the papers show some new inte...

  19. The role of health technology assessment on pharmaceutical reimbursement in selected middle-income countries.

    Science.gov (United States)

    Oortwijn, Wija; Mathijssen, Judith; Banta, David

    2010-05-01

    Middle-income countries are often referred to as developing or emerging economies and face multiple challenges of severe financial stresses in their health care sectors, and high disease burden. The objective of this study is to provide an overview of how health technology assessment (HTA) is used and organized in selected middle-income countries and its role in the process of pharmaceutical coverage. We selected middle-income countries where HTA activities are evident: Argentina, Brazil, China, Colombia, Israel, Mexico, Philippines, Korea, Taiwan, Thailand, and Turkey. We collected and reviewed relevant information to describe the health care and reimbursement systems and how HTA relates to coverage decision-making of pharmaceuticals. This was supplemented by information from a structured survey among professionals working in public and private health insurance, industry, regulatory authorities, ministries of health, academic units or HTA. All countries require market authorization for pharmaceuticals to be sold and most countries have a national plan defining which pharmaceuticals can be reimbursed. However, the use of HTA in reimbursement decisions is still in its early stages with varying levels of HTA guidance implementation. The study provides evidence of the development of HTA in coverage decision-making in middle-income countries. Increased health care spending and the resulting access to modern technology give a strong impetus to HTA. However, HTA is developing with uneven speed in middle-income countries and many countries are building on the organisational and methodological experience from established HTA agencies. Copyright (c) 2010 Elsevier Ireland Ltd. All rights reserved.

  20. Remediation Technology of Contaminated Areas with Organochlorines: A Preliminary Evaluation Seeking Potential Applications on the Site of Street Capua, Santo André - SP

    Directory of Open Access Journals (Sweden)

    Mauro Silva Ruiz

    2012-12-01

    Full Text Available This paper is aimed to analyze the use of remediation technologies for areas contaminated with organochlorine based on a literature review and discussions with specialists. The remediation technologies analyzed were bioremediation, phytoremediation, nanotechnology, chemical oxidation, and thermal desorption. The purpose is to identify and compare “key problems” for each of these technologies envisaging the use of one or more of these them f or the remediation of the Capua Street site in Santo André, SP. Four databases were used in the preliminary literature review: Scopus, SciELO, Web of Science, and Science Direct. A survey questionnaire was designed to gather information on publications of scientific papers and patents, specific uses of these technologies by companies, and cases of application. Since the quality of the data and information obtained from this questionnaire application was not satisfactory, a new research approach for complementing them was undertaken. For this purpose, the Web of Science was selected as the most adequate data basis to carry out this second survey. However, it was realized that even for this database - that is reference for evaluating academic institutions, researchers and maturity of technologies – bias coming from the original data source can affect the survey results. Moreover, as the number of keywords used in the research consisted of generic terms for each technology, it can also be assumed that if some authors have used very specific terms, a small amount of work published by them would possibly have been misrepresented in the final result.

  1. Learning transfer of geospatial technologies in secondary science and mathematics core areas

    Science.gov (United States)

    Nielsen, Curtis P.

    The purpose of this study was to investigate the transfer of geospatial technology knowledge and skill presented in a social sciences course context to other core areas of the curriculum. Specifically, this study explored the transfer of geospatial technology knowledge and skill to the STEM-related core areas of science and mathematics among ninth-grade students. Haskell's (2001) research on "levels of transfer" provided the theoretical framework for this study, which sought to demonstrate the experimental group's higher ability to transfer geospatial skills, higher mean assignment scores, higher post-test scores, higher geospatial skill application and deeper levels of transfer application than the control group. The participants of the study consisted of thirty ninth-graders enrolled in U.S. History, Earth Science and Integrated Mathematics 1 courses. The primary investigator of this study had no previous classroom experiences with this group of students. The participants who were enrolled in the school's existing two-section class configuration were assigned to experimental and control groups. The experimental group had ready access to Macintosh MacBook laptop computers, and the control group had ready access to Macintosh iPads. All participants in U.S. History received instruction with and were required to use ArcGIS Explorer Online during a Westward Expansion project. All participants were given the ArcGIS Explorer Online content assessment following the completion of the U.S. History project. Once the project in U.S. History was completed, Earth Science and Integrated Mathematics 1 began units of instruction beginning with a multiple-choice content pre-test created by the classroom teachers. Experimental participants received the same unit of instruction without the use or influence of ArcGIS Explorer Online. At the end of the Earth Science and Integrated Math 1 units, the same multiple-choice test was administered as the content post-test. Following the

  2. Electromagnetic packable technology (EMPACT) for detection and characterization of ordnance in post-conflict areas

    Science.gov (United States)

    Schultz, Gregory; Miller, Jonathan; Keranen, Joe

    2013-06-01

    Land reclamation efforts in post-conflict regions are often hampered by the presence of Unexploded Ordnance (UXO) or other Explosive Remnants of War (ERW). Surface geophysical methods, such as Electromagnetic Induction (EMI) and magnetometry, are typically applied to screen rehabilitation areas for UXO prior to excavation; however, the prevalence of innocuous magnetic clutter related to indigenous scrap, fragmentation, or geology can severely impede the progress and efficiency of these remediation efforts. Additionally, the variability in surface conditions and local topography necessitates the development of sensor technologies that can be applied to a range of sites including those that prohibit the use of vehicle-mounted or large array systems. We present a man-portable EMI sensor known as the Electromagnetic Packable Technology (EMPACT) system that features a multi-axis sensor configuration in a compact form factor. The system is designed for operation in challenging site conditions and can be used in low ground-standoff modes to detect small and low-metal content objects. The EMPACT acquires high spatial density, multi-axis data that enable high resolution of small objects. This high density data can also be used to provide characterization of target physical features, such as size, material content, and shape. We summarize the development of this system for humanitarian demining operations and present results from preliminary system evaluations against a range of target types. Specifically, we assess the general detection capabilities of the EMPACT system and we evaluate the potential for target classification based on analysis of data and target model features.

  3. PROBLEMS OF PROTECTION OF URBAN AREAS FROM RADIONUCLIDES STRONTIUM-90 AND CAESIUM-137 AFTER TECHNOLOGICAL DISASTERS

    Directory of Open Access Journals (Sweden)

    Olga Cheremisina

    2017-05-01

    Full Text Available The methods of decontamination of radionuclides from soils are considered. The literature focuses on fixing radionuclides in soils and creating geochemical barriers that it is prevent the spread of pollution. The main disadvantage of these methods is exclude the possibility of building a territory. It is need to clean up the area to the sanitary and hygienic requirements for further use and then it is desirable to fix the residual activity. Carried out an analysis of forms of radionuclides fixation in soils and mechanics of this fixation, therewith revealed that Cs-137 fixed more strongly on mineral component of soil, than Sr-90, which is mainly in the acid-soluble and exchangeable form, and, as a consequence, passes into the liquid phase during soil deactivation more easily. Contaminated soil deactivation in the urbanized territory is possible by washing it by ferric chloride solution at a concentration 0.02-0.05 M and with an equimolar addition of an ammonium chloride. Therewith most efficient methods, which used in-situ conditions, are heap and convection leaching technologies with treatment degree, which not less than 80%. At the same time, the most efficient methods which used in-situ conditions are heap and the convection leaching. The hardware-technological scheme of a convection leaching is presented. Noted that ammonium salts additions slightly rising coefficient of treatment from Sr-90. Because ammonium salts aren’t expensive, their additions allow to obtain significant economic benefits due to decreasing of ferric chloride consumption, which is more valuable, and waste water volume reduction.

  4. Inkjet printing of paracetamol and indomethacin using electromagnetic technology: Rheological compatibility and polymorphic selectivity.

    Science.gov (United States)

    Kollamaram, Gayathri; Hopkins, Simon C; Glowacki, Bartek A; Croker, Denise M; Walker, Gavin M

    2018-03-30

    Drop-on-demand inkjet printing is a potential enabling technology both for continuous manufacturing of pharmaceuticals and for personalized medicine, but its use is often restricted to low-viscosity solutions and nano-suspensions. In the present study, a robust electromagnetic (valvejet) inkjet technology has been successfully applied to deposit prototype dosage forms from solutions with a wide range of viscosities, and from suspensions with particle sizes exceeding 2 μm. A detailed solid-state study of paracetamol, printed from a solution ink on hydroxypropyl methylcellulose (HPMC), revealed that the morphology of the substrate and its chemical interactions can have a considerable influence on polymorphic selectivity. Paracetamol ink crystallized exclusively into form II when printed on a smooth polyethylene terephthalate substrate, and exclusively into form I when in sufficient proximity to the rough surface of the HPMC substrate to be influenced by confinement in pores and chemical interactions. The relative standard deviation in the strength of the dosage forms was fixed dose combinations are of particular interest. Copyright © 2018 Elsevier B.V. All rights reserved.

  5. The Importance of Knowledge Management in Terms of Increasing Social Capital in Selected Slovene Technology Parks

    Directory of Open Access Journals (Sweden)

    Riko Novak

    2013-12-01

    Full Text Available This article investigates the importance of knowledge management (KM and how it is influencing social capital (SC in selected organisations that are members of Slovene technology parks. The purpose of this article is to point out statistical important characteristics between the dependant variable and several independent variables on the basis of preliminary studied empirical data based on a population of 667 organisations chosen from the subjects of the innovative environment database maintained by the Public Agency of the Republic of Slovenia for Entrepreneurship and Foreign Investments (JAPTI. On the basis of a multivariate regression analysis we wanted to present empirical findings, namely, whether communication technologies and the capability (ability of the employed to access information sources influences KM. With this article we want to present the final findings which define the development of a conceptual framework for understanding the influence of KM in small and medium sized companies on the development of social capital. We came to the conclusion that in an organisation the importance of intellectual and social capital, intangible capital assets and their continuous measurement has to be emphasised in order to increase the importance (awareness of KM.

  6. Ten-year diameter and basal area growth of trees surrounding small group selection openings

    Science.gov (United States)

    Philip M. McDonald; Martin W. Ritchie; Celeste S. Abbott

    1996-01-01

    The effects of small openings in forest stands has interested silviculturists and ecologists for years. Interest generally has centered on the vegetation in the openings, not on that immediately outside of them. Quantitative information on the growth of trees adjacent to group-selection openings, although often mentioned in forestry textbooks as contributing to cost...

  7. Lead levels in deciduous teeth of children from selected urban areas ...

    African Journals Online (AJOL)

    1983-04-09

    Apr 9, 1983 ... Blood and urine levels are markers of recent ... The selected teeth were stored in plastic bags at _7° C. Before analysis remnants of roots (if ... varied from sample to sample, so that aqueous standards could not be used for ...

  8. Large-area selective CVD epitaxial growth of Ge on Si substrates

    NARCIS (Netherlands)

    Sammak, A.; De Boer, W.; Nanver, L.K.

    2011-01-01

    Selective epitaxial growth of crystalline Ge on Si in a standard ASM Epsilon 2000 CVD reactor is investigated for the fabrication of Ge p+n diodes. At the deposition temperature of 700?C, most of the lattice mismatch-defects are trapped within first 300nm of Ge growth and good quality single crystal

  9. Changes in spatiotemporal land use patterns in selected hydrogeomorphic areas of China and the USA

    Science.gov (United States)

    Differences exist in land use/cover pattern and its change between the P. R. China and the USA. In order to describe those differences, land use changes in representative regions were quantitatively analyzed and compared. Xiamen City, Changzhutan region and Liupan Mountains regions were selected to ...

  10. Special Area Management Plan (SAMP) Upper Yellowstone River, Montana: Environmental Assessment, FONSI, and Selected Alternative

    Science.gov (United States)

    2011-04-01

    slopes must be flatter than the angle of repose for the selected revetment material. For example, rock riprap normally needs to be placed on a slope...plan that responds effectively to physical, social , and legal changes. The need for future modifications to the SAMP will be evaluated periodically

  11. Self-organized spectrum chunk selection algorithm for Local Area LTE-Advanced

    DEFF Research Database (Denmark)

    Kumar, Sanjay; Wang, Yuanye; Marchetti, Nicola

    2010-01-01

    This paper presents a self organized spectrum chunk selection algorithm in order to minimize the mutual intercell interference among Home Node Bs (HeNBs), aiming to improve the system throughput performance compared to the existing frequency reuse one scheme. The proposed algorithm is useful...

  12. High-resolution imaging of expertise reveals reliable object selectivity in the fusiform face area related to perceptual performance.

    Science.gov (United States)

    McGugin, Rankin Williams; Gatenby, J Christopher; Gore, John C; Gauthier, Isabel

    2012-10-16

    The fusiform face area (FFA) is a region of human cortex that responds selectively to faces, but whether it supports a more general function relevant for perceptual expertise is debated. Although both faces and objects of expertise engage many brain areas, the FFA remains the focus of the strongest modular claims and the clearest predictions about expertise. Functional MRI studies at standard-resolution (SR-fMRI) have found responses in the FFA for nonface objects of expertise, but high-resolution fMRI (HR-fMRI) in the FFA [Grill-Spector K, et al. (2006) Nat Neurosci 9:1177-1185] and neurophysiology in face patches in the monkey brain [Tsao DY, et al. (2006) Science 311:670-674] reveal no reliable selectivity for objects. It is thus possible that FFA responses to objects with SR-fMRI are a result of spatial blurring of responses from nonface-selective areas, potentially driven by attention to objects of expertise. Using HR-fMRI in two experiments, we provide evidence of reliable responses to cars in the FFA that correlate with behavioral car expertise. Effects of expertise in the FFA for nonface objects cannot be attributed to spatial blurring beyond the scale at which modular claims have been made, and within the lateral fusiform gyrus, they are restricted to a small area (200 mm(2) on the right and 50 mm(2) on the left) centered on the peak of face selectivity. Experience with a category may be sufficient to explain the spatially clustered face selectivity observed in this region.

  13. GIS-based identification of areas with mineral resource potential for six selected deposit groups, Bureau of Land Management Central Yukon Planning Area, Alaska

    Science.gov (United States)

    Jones, James V.; Karl, Susan M.; Labay, Keith A.; Shew, Nora B.; Granitto, Matthew; Hayes, Timothy S.; Mauk, Jeffrey L.; Schmidt, Jeanine M.; Todd, Erin; Wang, Bronwen; Werdon, Melanie B.; Yager, Douglas B.

    2015-01-01

    This study, covering the Bureau of Land Management (BLM) Central Yukon Planning Area (CYPA), Alaska, was prepared to aid BLM mineral resource management planning. Estimated mineral resource potential and certainty are mapped for six selected mineral deposit groups: (1) rare earth element (REE) deposits associated with peralkaline to carbonatitic intrusive igneous rocks, (2) placer and paleoplacer gold, (3) platinum group element (PGE) deposits associated with mafic and ultramafic intrusive igneous rocks, (4) carbonate-hosted copper deposits, (5) sandstone uranium deposits, and (6) tin-tungsten-molybdenum-fluorspar deposits associated with specialized granites. These six deposit groups include most of the strategic and critical elements of greatest interest in current exploration.

  14. [Design and fabrication of the custom-made titanium condyle by selective laser melting technology].

    Science.gov (United States)

    Chen, Jianyu; Luo, Chongdai; Zhang, Chunyu; Zhang, Gong; Qiu, Weiqian; Zhang, Zhiguang

    2014-10-01

    To design and fabricate the custom-made titanium mandibular condyle by the reverse engineering technology combined with selective laser melting (SLM) technology and to explore the mechanical properties of the SLM-processed samples and the application of the custom-made condyle in the temporomandibular joint (TMJ) reconstruction. The three-dimensional model of the mandibular condyle was obtained from a series of CT databases. The custom-made condyle model was designed by the reverse engineering software. The mandibular condyle was made of titanium powder with a particle size of 20-65 µm as the basic material and the processing was carried out in an argon atmosphere by the SLM machine. The yield strength, ultimate strength, bending strength, hardness, surface morphology and roughness were tested and analyzed. The finite element analysis (FEA) was used to analyze the stress distribution. The complex geometry and the surface of the custom-made condyle can be reproduced precisely by the SLM. The mechanical results showed that the yield strength, ultimate strength, bending strength and hardness were (559±14) MPa, (659±32) MPa, (1 067±42) MPa, and (212±4)HV, respectively. The surface roughness was reduced by sandblast treatment. The custom-made titanium condyle can be fabricated by SLM technology which is time-saving and highly digitized. The mechanical properties of the SLM sample can meet the requirements of surgical implant material in the clinic. The possibility of fabricating custom-made titanium mandibular condyle combined with the FEA opens new interesting perspectives for TMJ reconstruction.

  15. Suitability assessment of building energy saving technologies for office buildings in cold areas of China based on an assessment framework

    International Nuclear Information System (INIS)

    Geng, Geng; Wang, Zhaoxia; Zhao, Jing; Zhu, Neng

    2015-01-01

    Highlights: • An assessment method considering economy, environment and technology is proposed. • Office buildings are classified into 3 types and weights are calculated respectively. • BESTs were summed up as 3 suitability levels. • Recommendations are proposed for adopting in design stage. - Abstract: Blind application and extensive copy of building energy saving technologies have been found very common through investigation in China. Emphases should be put on the suitability assessment when selecting and optimizing building energy saving technologies. This paper created an assessment method, namely an assessment framework to assess the suitability level of building energy saving technologies from a holistic point of view. Fuzzy analytic hierarchy process was adopted. 3 factors and 8 sub-factors were included in the framework. The office buildings were classified into 3 types to calculate weights of factors and sub-factors. The assessment framework was established for each type of office buildings. 20 energy saving technologies from surveyed cases was selected as case study. Ranks of suitability level of the assessment objects were obtained for each type of office buildings. The assessment results could be referred when selecting building energy saving technologies in the design stage

  16. Application of Radiation Chemistry to Some Selected Technological Issues Related to the Development of Nuclear Energy.

    Science.gov (United States)

    Bobrowski, Krzysztof; Skotnicki, Konrad; Szreder, Tomasz

    2016-10-01

    The most important contributions of radiation chemistry to some selected technological issues related to water-cooled reactors, reprocessing of spent nuclear fuel and high-level radioactive wastes, and fuel evolution during final radioactive waste disposal are highlighted. Chemical reactions occurring at the operating temperatures and pressures of reactors and involving primary transients and stable products from water radiolysis are presented and discussed in terms of the kinetic parameters and radiation chemical yields. The knowledge of these parameters is essential since they serve as input data to the models of water radiolysis in the primary loop of light water reactors and super critical water reactors. Selected features of water radiolysis in heterogeneous systems, such as aqueous nanoparticle suspensions and slurries, ceramic oxides surfaces, nanoporous, and cement-based materials, are discussed. They are of particular concern in the primary cooling loops in nuclear reactors and long-term storage of nuclear waste in geological repositories. This also includes radiation-induced processes related to corrosion of cladding materials and copper-coated iron canisters, dissolution of spent nuclear fuel, and changes of bentonite clays properties. Radiation-induced processes affecting stability of solvents and solvent extraction ligands as well oxidation states of actinide metal ions during recycling of the spent nuclear fuel are also briefly summarized.

  17. Environmental resources of selected areas of Hawaii: Cultural environment and aesthetic resources

    Energy Technology Data Exchange (ETDEWEB)

    Trettin, L.D. [Univ. of Tennessee (United States); Petrich, C.H.; Saulsbury, J.W. [Oak Ridge National Lab., TN (United States)

    1996-01-01

    This report has been prepared to make available and archive the background scientific data and related information collected on the cultural environment and aesthetic resources during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. The cultural environment in the Geothermal Resource Zone (GRZ) and associated study area consists of Native Hawaiian cultural and religious practices and both Native Hawaiian and non-Native Hawaiian cultural resources. This report consists of three sections: (1) a description of Native Hawaiian cultural and religious rights, practices, and values; (2) a description of historic, prehistoric, and traditional Native Hawaiian sites; and (3) a description of other (non-native) sites that could be affected by development in the study area. Within each section, the level of descriptive detail varies according to the information currently available. The description of the cultural environment is most specific in its coverage of the Geothermal Resource Subzones in the Puna District of the island of Hawaii and the study area of South Maui. Ethnographic and archaeological reports by Cultural Advocacy Network Developing Options and International Archaeological Research Institute, Inc., respectively, supplement the descriptions of these two areas with new information collected specifically for this study. Less detailed descriptions of additional study areas on Oahu, Maui, Molokai, and the island of Hawaii are based on existing archaeological surveys.

  18. Focused evaluation of selected remedial alternatives for the underground test area

    International Nuclear Information System (INIS)

    1997-04-01

    The Nevada Test Site (NTS), located in Nye County in southern Nevada, was the location of 928 nuclear tests conducted between 1951 and 1992. Of the total tests, 824 were nuclear tests performed underground. This report describes the approach taken to determine whether any specific, proven, cost-effective technologies currently exist to aid in the removal of the radioactive contaminants from the groundwater, in the stabilization of these contaminants, and in the removal of the source of the contaminants

  19. Development of selective photoionization spectroscopy technology - Development of a computer program to calculate selective ionization of atoms with multistep processes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Soon; Nam, Baek Il [Myongji University, Seoul (Korea, Republic of)

    1995-08-01

    We have developed computer programs to calculate 2-and 3-step selective resonant multiphoton ionization of atoms. Autoionization resonances in the final continuum can be put into account via B-Spline basis set method. 8 refs., 5 figs. (author)

  20. Selected cost considerations for geothermal district heating in existing single-family residential areas

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin

    1996-06-01

    In the past, district heating (geothermal or conventionally fueled) has not been widely applied to the single-family residential sector. Low-heat load density is the commonly cited reason for this. Although it's true that load density in these areas is much lower than for downtown business districts, other frequently overlooked factors may compensate for load density. In particular, costs for distribution system installation can be substantially lower in some residential areas due to a variety of factors. This reduced development cost may partially compensate for the reduced revenue resulting from low-load density. This report examines cost associated with the overall design of the system (direct or indirect system design), distribution piping installation, and customer branch lines. It concludes with a comparison of the costs for system development and the revenue from an example residential area.