A MCDM approach for project finance selection: An application in the renewable energy sector

Directory of Open Access Journals (Sweden)

García-Bernabeu, Ana

2015-05-01

Full Text Available Renewable energy (RE is emerging as a solution in order to replace fossil fuels and become the primary source of energy consumption. Investments in the RE sector involve huge amounts of capital but also many risks. Public sector plays an important role in promoting RE projects but due to the need for reducing public expenditure the private sector becomes essential in financing this type of projects. Project Finance is widely used in RE projects and is especially attractive to the private sector because it can fund major projects off balance sheet. The objective of this paper is to present a decision making tool for helping the private sector on the selection process of RE projects to be funded. The problem could be considered as a multiple criteria decision-making problem where both, financial and non-financial criteria have to be taken into account. Objective aggregation weights for those criteria are obtained using the Moderate Pessimism Decision Making approach and a final ranking of the projects is obtained.

Recruitment Practices In It Sector A Comparative Analysis Of Select Indian amp Mnc Companies

Directory of Open Access Journals (Sweden)

Dr. N. Sree Rajani

2015-08-01

Full Text Available Recruitment and selection lie at the heart of how businesses procure human resource required to maintain a sustainable competitive advantage over its competitors. Staffing personnel and especially managerial personnel in the organizations may well represent one of the most important human resource management functions. Information technology essentially refers to the digital processing storage and communication of information of all kinds. The IT sector is likely to give employment to 9 million people in India by 2008 and also generate 87 billion in annual revenues and 225 billion in market in India by 2008. The present article focuses on how efficiently the IT sector follows the Recruitment amp selection processes and to trace out the differences of the same between the Indian amp MNC companies if any.

Standard sirens and dark sector with Gaussian process*

Directory of Open Access Journals (Sweden)

Cai Rong-Gen

2018-01-01

Full Text Available The gravitational waves from compact binary systems are viewed as a standard siren to probe the evolution of the universe. This paper summarizes the potential and ability to use the gravitational waves to constrain the cosmological parameters and the dark sector interaction in the Gaussian process methodology. After briefly introducing the method to reconstruct the dark sector interaction by the Gaussian process, the concept of standard sirens and the analysis of reconstructing the dark sector interaction with LISA are outlined. Furthermore, we estimate the constraint ability of the gravitational waves on cosmological parameters with ET. The numerical methods we use are Gaussian process and the Markov-Chain Monte-Carlo. Finally, we also forecast the improvements of the abilities to constrain the cosmological parameters with ET and LISA combined with the Planck.

Gene expression network reconstruction by convex feature selection when incorporating genetic perturbations.

Directory of Open Access Journals (Sweden)

Benjamin A Logsdon

Full Text Available Cellular gene expression measurements contain regulatory information that can be used to discover novel network relationships. Here, we present a new algorithm for network reconstruction powered by the adaptive lasso, a theoretically and empirically well-behaved method for selecting the regulatory features of a network. Any algorithms designed for network discovery that make use of directed probabilistic graphs require perturbations, produced by either experiments or naturally occurring genetic variation, to successfully infer unique regulatory relationships from gene expression data. Our approach makes use of appropriately selected cis-expression Quantitative Trait Loci (cis-eQTL, which provide a sufficient set of independent perturbations for maximum network resolution. We compare the performance of our network reconstruction algorithm to four other approaches: the PC-algorithm, QTLnet, the QDG algorithm, and the NEO algorithm, all of which have been used to reconstruct directed networks among phenotypes leveraging QTL. We show that the adaptive lasso can outperform these algorithms for networks of ten genes and ten cis-eQTL, and is competitive with the QDG algorithm for networks with thirty genes and thirty cis-eQTL, with rich topologies and hundreds of samples. Using this novel approach, we identify unique sets of directed relationships in Saccharomyces cerevisiae when analyzing genome-wide gene expression data for an intercross between a wild strain and a lab strain. We recover novel putative network relationships between a tyrosine biosynthesis gene (TYR1, and genes involved in endocytosis (RCY1, the spindle checkpoint (BUB2, sulfonate catabolism (JLP1, and cell-cell communication (PRM7. Our algorithm provides a synthesis of feature selection methods and graphical model theory that has the potential to reveal new directed regulatory relationships from the analysis of population level genetic and gene expression data.

Health worker experiences of and movement between public and private not-for-profit sectors-findings from post-conflict Northern Uganda.

Science.gov (United States)

Namakula, Justine; Witter, Sophie; Ssengooba, Freddie

2016-05-05

Northern Uganda suffered 20 years of conflict which devastated lives and the health system. Since 2006, there has been investment in reconstruction, which includes efforts to rebuild the health workforce. This article has two objectives: first, to understand health workers' experiences of working in public and private not-for-profit (PNFP) sectors during and after the conflict in Northern Uganda, and second, to understand the factors that influenced health workers' movement between public and PNFP sectors during and after the conflict. A life history approach was used with 26 health staff purposively selected from public and PNFP facilities in four districts of Northern Uganda. Staff with at least 10 years' experience were selected, which resulted in a sample which was largely female and mid-level. Two thirds were currently employed in the public sector and just over a third in the PNFP sector. A thematic data analysis was guided by the framework analysis approach, analysis framework stages and ATLAS.ti software version 7.0. Analysis reveals that most of the current staff were trained in the PNFP sector, which appears to offer higher quality training experiences. During the conflict period, the PNFP sector also functioned more effectively and was relatively better able to support its staff. However, since the end of the conflict, the public sector has been reconstructed and is now viewed as offering a better overall package for staff. Most reported movement has been in that direction, and many in the PNFP sector state intention to move to the public sector. While there is sectoral loyalty on both sides and some bonds created through training, the PNFP sector needs to become more competitive to retain staff so as to continue delivering services to deprived communities in Northern Uganda. There has been limited previous longitudinal analysis of how health staff perceive different sectors and why they move between them, particularly in conflict-affected contexts

IDENTIFYING OPERATIONAL REQUIREMENTS TO SELECT SUITABLE DECISION MODELS FOR A PUBLIC SECTOR EPROCUREMENT DECISION SUPPORT SYSTEM

Directory of Open Access Journals (Sweden)

Mohamed Adil

2014-10-01

Full Text Available Public sector procurement should be a transparent and fair process. Strict legal requirements are enforced on public sector procurement to make it a standardised process. To make fair decisions on selecting suppliers, a practical method which adheres to legal requirements is important. The research that is the base for this paper aimed at identifying a suitable Multi-Criteria Decision Analysis (MCDA method for the specific legal and functional needs of the Maldivian Public Sector. To identify such operational requirements, a set of focus group interviews were conducted in the Maldives with public officials responsible for procurement decision making. Based on the operational requirements identified through focus groups, criteria-based evaluation is done on published MCDA methods to identify the suitable methods for e-procurement decision making. This paper describes the identification of the operational requirements and the results of the evaluation to select suitable decision models for the Maldivian context.

Reconstructing the informal economic sector in Bulawayo, Zimbabwe

African Journals Online (AJOL)

strategies and programmes that have been employed ... then shifts to a case study of Bulawayo ..... 7.4 Strategy 4: Marketing of informal sector products and services. Besides training, the Ministry also helps informal ..... Concepts and policies.

The transverse musculocutaneous gracilis flap for breast reconstruction: guidelines for flap and patient selection.

Science.gov (United States)

Schoeller, Thomas; Huemer, Georg M; Wechselberger, Gottfried

2008-07-01

The transverse musculocutaneous gracilis (TMG) flap has received little attention in the literature as a valuable alternative source of donor tissue in the setting of breast reconstruction. The authors give an in-depth review of their experience with breast reconstruction using the TMG flap. A retrospective review of 111 patients treated with a TMG flap for breast reconstruction in an immediate or a delayed setting between August of 2002 and July of 2007 was undertaken. Of these, 26 patients underwent bilateral reconstruction and 68 underwent unilateral reconstruction, and 17 patients underwent reconstruction unilaterally with a double TMG flap. Patient age ranged between 24 and 65 years (mean, 37 years). Twelve patients had to be taken back to the operating room because of flap-related problems and nine patients underwent successful revision microsurgically, resulting in three complete flap losses in a series of 111 patients with 154 transplanted TMG flaps. Partial flap loss was encountered in two patients, whereas fat tissue necrosis was managed conservatively in six patients. Donor-site morbidity was an advantage of this flap, with a concealed scar and minimal contour irregularities of the thigh, even in unilateral harvest. Complications included delayed wound healing (n = 10), hematoma (n = 5), and transient sensory deficit over the posterior thigh (n = 49). The TMG flap is more than an alternative to the deep inferior epigastric perforator (DIEP) flap in microsurgical breast reconstruction in selected patients. In certain indications, such as bilateral reconstructions, it possibly surpasses the DIEP flap because of a better concealed donor scar and easier harvest.

Market study for direct utilization of geothermal resources by selected sectors of economy

Energy Technology Data Exchange (ETDEWEB)

1980-08-01

A comprehensive analysis is presented of industrial markets potential for direct use of geothermal energy by a total of six industry sectors: food and kindred products; tobacco manufactures; textile mill products; lumber and wood products (except furniture); chemicals and allied products; and leather and leather products. A brief statement is presented regarding sectors of the economy and major manufacturing processes which can readily utilize direct geothermal energy. Previous studies on plant location determinants are summarized and appropriate empirical data provided on plant locations. Location determinants and potential for direct use of geothermal resources are presented. The data was gathered through interviews with 30 senior executives in the six sectors of economy selected for study. Probable locations of plants in geothermal resource areas and recommendations for geothermal resource marketing are presented. Appendix A presents factors which impact on industry location decisions. Appendix B presents industry executives interviewed during the course of this study. (MHR)

Automated selection of the optimal cardiac phase for single-beat coronary CT angiography reconstruction

International Nuclear Information System (INIS)

Stassi, D.; Ma, H.; Schmidt, T. G.; Dutta, S.; Soderman, A.; Pazzani, D.; Gros, E.; Okerlund, D.

2016-01-01

Purpose: Reconstructing a low-motion cardiac phase is expected to improve coronary artery visualization in coronary computed tomography angiography (CCTA) exams. This study developed an automated algorithm for selecting the optimal cardiac phase for CCTA reconstruction. The algorithm uses prospectively gated, single-beat, multiphase data made possible by wide cone-beam imaging. The proposed algorithm differs from previous approaches because the optimal phase is identified based on vessel image quality (IQ) directly, compared to previous approaches that included motion estimation and interphase processing. Because there is no processing of interphase information, the algorithm can be applied to any sampling of image phases, making it suited for prospectively gated studies where only a subset of phases are available. Methods: An automated algorithm was developed to select the optimal phase based on quantitative IQ metrics. For each reconstructed slice at each reconstructed phase, an image quality metric was calculated based on measures of circularity and edge strength of through-plane vessels. The image quality metric was aggregated across slices, while a metric of vessel-location consistency was used to ignore slices that did not contain through-plane vessels. The algorithm performance was evaluated using two observer studies. Fourteen single-beat cardiac CT exams (Revolution CT, GE Healthcare, Chalfont St. Giles, UK) reconstructed at 2% intervals were evaluated for best systolic (1), diastolic (6), or systolic and diastolic phases (7) by three readers and the algorithm. Pairwise inter-reader and reader-algorithm agreement was evaluated using the mean absolute difference (MAD) and concordance correlation coefficient (CCC) between the reader and algorithm-selected phases. A reader-consensus best phase was determined and compared to the algorithm selected phase. In cases where the algorithm and consensus best phases differed by more than 2%, IQ was scored by three

INDIA: Gender Equality Diagnostic of Selected Sectors

OpenAIRE

Asian Development Bank (ADB)

2013-01-01

Concerns about persisting gender-based exclusion from the benefits of development have encouraged the Government of India and its partner institutions and donor agencies to mainstream gender in its policies, programs, and projects. This publication provides a gender analysis of six priority sectors—agriculture, energy, education, finance and public sector management, transport, and urban development—and suggests possible further actions to strengthen ADB approaches in these sectors. It is exp...

Experimental study of sector and linear array ultrasound accuracy and the influence of navigated 3D-reconstruction as compared to MRI in a brain tumor model.

Science.gov (United States)

Siekmann, Max; Lothes, Thomas; König, Ralph; Wirtz, Christian Rainer; Coburger, Jan

2018-03-01

Currently, intraoperative ultrasound in brain tumor surgery is a rapidly propagating option in imaging technology. We examined the accuracy and resolution limits of different ultrasound probes and the influence of 3D-reconstruction in a phantom and compared these results to MRI in an intraoperative setting (iMRI). An agarose gel phantom with predefined gel targets was examined with iMRI, a sector (SUS) and a linear (LUS) array probe with two-dimensional images. Additionally, 3D-reconstructed sweeps in perpendicular directions were made of every target with both probes, resulting in 392 measurements. Statistical calculations were performed, and comparative boxplots were generated. Every measurement of iMRI and LUS was more precise than SUS, while there was no apparent difference in height of iMRI and 3D-reconstructed LUS. Measurements with 3D-reconstructed LUS were always more accurate than in 2D-LUS, while 3D-reconstruction of SUS showed nearly no differences to 2D-SUS in some measurements. We found correlations of 3D-reconstructed SUS and LUS length and width measurements with 2D results in the same image orientation. LUS provides an accuracy and resolution comparable to iMRI, while SUS is less exact than LUS and iMRI. 3D-reconstruction showed the potential to distinctly improve accuracy and resolution of ultrasound images, although there is a strong correlation with the sweep direction during data acquisition.

Gender wage differences in the selected Czech public sector company

Directory of Open Access Journals (Sweden)

Veronika Hedija

2012-01-01

Full Text Available The issue of wage disparity between men and women belongs to the current and widely discussed topics. The attention given to this subject also reflects the fact that the issue of the equality between women and men and non-discrimination by gender is incorporated in the law of the European Union. A number of studies are devoted to the gender wage disparities and the root cause of wage differences in the Czech Republic, however, only few of these deal with the gender wage differentials in the public sector. It is exactly this issue, which is discussed in this article, its aim being to identify the extent of the gender pay gap in the selected Czech public sector company. The article concentrates on finding the main causes for the existence of wage differences between men and women and determining whether the company inclines to wage discrimination against women. The Oaxaca-Blinder decomposition is used to define, which part of the gender pay gap can be attributed to the different characteristics of men and women and which part stays unexplained. It is this unexplained part that can be the result of wage discrimination against women.

Assessment of the energy requirements and selected options facing major consumers within the Egyptian industrial and agricultural sectors. Final report

Energy Technology Data Exchange (ETDEWEB)

1978-05-31

The objectives of the energy assessment study of Egypt are to develop an understanding of the current status of the principal energy users in Egypt's industrial and agricultural sectors; to estimate the energy demand and efficiency for each selected subsector within these major sectors; to identify opportunities for fuel type changes, technology switches, or production pattern changes which might increase the efficiency with which Egypt's energy is used both now and in the future: and based on options identified, to forecast energy efficiencies for selected Egyptian subsectors for the years 1985 and 2000. Study results are presented for the iron and steel, aluminium, fertilizer, chemical, petrochemical, cement, and textile industries and automotive manufacturers. Study results for drainage, irrigation, and mechanization procedures in the agricultural sector and food processing sector are also presented. (MCW)

Large-scale Reconstructions and Independent, Unbiased Clustering Based on Morphological Metrics to Classify Neurons in Selective Populations.

Science.gov (United States)

Bragg, Elise M; Briggs, Farran

2017-02-15

This protocol outlines large-scale reconstructions of neurons combined with the use of independent and unbiased clustering analyses to create a comprehensive survey of the morphological characteristics observed among a selective neuronal population. Combination of these techniques constitutes a novel approach for the collection and analysis of neuroanatomical data. Together, these techniques enable large-scale, and therefore more comprehensive, sampling of selective neuronal populations and establish unbiased quantitative methods for describing morphologically unique neuronal classes within a population. The protocol outlines the use of modified rabies virus to selectively label neurons. G-deleted rabies virus acts like a retrograde tracer following stereotaxic injection into a target brain structure of interest and serves as a vehicle for the delivery and expression of EGFP in neurons. Large numbers of neurons are infected using this technique and express GFP throughout their dendrites, producing "Golgi-like" complete fills of individual neurons. Accordingly, the virus-mediated retrograde tracing method improves upon traditional dye-based retrograde tracing techniques by producing complete intracellular fills. Individual well-isolated neurons spanning all regions of the brain area under study are selected for reconstruction in order to obtain a representative sample of neurons. The protocol outlines procedures to reconstruct cell bodies and complete dendritic arborization patterns of labeled neurons spanning multiple tissue sections. Morphological data, including positions of each neuron within the brain structure, are extracted for further analysis. Standard programming functions were utilized to perform independent cluster analyses and cluster evaluations based on morphological metrics. To verify the utility of these analyses, statistical evaluation of a cluster analysis performed on 160 neurons reconstructed in the thalamic reticular nucleus of the thalamus

Topological selections for V0 (K0s, Lambda) and Cascade (Xi, Omega) reconstruction in ALICE

CERN Multimedia

Maire, Antonin

2011-01-01

The figures are illustrations of topological selections used by ALICE to reconstruct ϕ(1020), V0 particles (K°s and Λ, single-strange particles) and cascades (Ξ- and Ω-, charged multi-strange baryons).

Effect of Cardiac Phases and Conductivity Inhomogeneities of the Thorax Models on ECG Lead Selection and Reconstruction

National Research Council Canada - National Science Library

Takano, Noriyuki

2001-01-01

ECG lead selection and reconstruction were investigated in the present study using ECG source-to-measurement transfer matrices computed in inhomogeneous and homogeneous conductor thorax-heart models...

Adaptive enhancement of optical fringe patterns by selective reconstruction using FABEMD algorithm and Hilbert spiral transform.

Science.gov (United States)

Trusiak, Maciej; Patorski, Krzysztof; Wielgus, Maciej

2012-10-08

Presented method for fringe pattern enhancement has been designed for processing and analyzing low quality fringe patterns. It uses a modified fast and adaptive bidimensional empirical mode decomposition (FABEMD) for the extraction of bidimensional intrinsic mode functions (BIMFs) from an interferogram. Fringe pattern is then selectively reconstructed (SR) taking the regions of selected BIMFs with high modulation values only. Amplitude demodulation and normalization of the reconstructed image is conducted using the spiral phase Hilbert transform (HS). It has been tested using computer generated interferograms and real data. The performance of the presented SR-FABEMD-HS method is compared with other normalization techniques. Its superiority, potential and robustness to high fringe density variations and the presence of noise, modulation and background illumination defects in analyzed fringe patterns has been corroborated.

Bayesian model selection of template forward models for EEG source reconstruction.

Science.gov (United States)

Strobbe, Gregor; van Mierlo, Pieter; De Vos, Maarten; Mijović, Bogdan; Hallez, Hans; Van Huffel, Sabine; López, José David; Vandenberghe, Stefaan

2014-06-01

Several EEG source reconstruction techniques have been proposed to identify the generating neuronal sources of electrical activity measured on the scalp. The solution of these techniques depends directly on the accuracy of the forward model that is inverted. Recently, a parametric empirical Bayesian (PEB) framework for distributed source reconstruction in EEG/MEG was introduced and implemented in the Statistical Parametric Mapping (SPM) software. The framework allows us to compare different forward modeling approaches, using real data, instead of using more traditional simulated data from an assumed true forward model. In the absence of a subject specific MR image, a 3-layered boundary element method (BEM) template head model is currently used including a scalp, skull and brain compartment. In this study, we introduced volumetric template head models based on the finite difference method (FDM). We constructed a FDM head model equivalent to the BEM model and an extended FDM model including CSF. These models were compared within the context of three different types of source priors related to the type of inversion used in the PEB framework: independent and identically distributed (IID) sources, equivalent to classical minimum norm approaches, coherence (COH) priors similar to methods such as LORETA, and multiple sparse priors (MSP). The resulting models were compared based on ERP data of 20 subjects using Bayesian model selection for group studies. The reconstructed activity was also compared with the findings of previous studies using functional magnetic resonance imaging. We found very strong evidence in favor of the extended FDM head model with CSF and assuming MSP. These results suggest that the use of realistic volumetric forward models can improve PEB EEG source reconstruction. Copyright © 2014 Elsevier Inc. All rights reserved.

Factors affecting CO2 emission from the power sector of selected countries in Asia and the Pacific

International Nuclear Information System (INIS)

Shrestha, Ram M.; Anandarajah, Gabrial; Liyanage, Migara H.

2009-01-01

This study analyzes the key factors behind the CO 2 emissions from the power sector in fifteen selected countries in Asia and the Pacific using the Log-Mean Divisia Index method of decomposition. The roles of changes in economic output, electricity intensity of the economy, fuel intensity of power generation and generation structure are examined in the evolution of CO 2 emission from the power sector of the selected countries during 1980-2004. The study shows that the economic growth was the dominant factor behind the increase in CO 2 emission in ten of the selected countries (i.e., Australia, China, India, Japan, Malaysia, Pakistan, South Korea, Singapore, Thailand and Vietnam, while the increasing electricity intensity of the economy was the main factor in three countries (Bangladesh, Indonesia and Philippines). Structural changes in power generation were found to be the main contributor to changes in the CO 2 emission in the case of Sri Lanka and New Zealand.

The gender pay gap in the Australian private sector: Is selection relevant across the wage distribution?

OpenAIRE

Chzhen, Yekaterina; Mumford, Karen A.; Nicodemo, Catia

2012-01-01

We use quantile regression and counterfactual decomposition methods to explore gender gaps across the earning distribution for full-time employees in the Australian private sector. Significant evidence of a self selection effect for women into full-time employment (or of components of self selection related to observable or unobservable characteristics) is, interestingly, not found to be relevant in the Australian context. Substantial gender earnings gaps (and glass ceilings) are established,...

Public sector scale-up of zinc and ORS improves coverage in selected districts in Bihar, India.

Science.gov (United States)

Walker, Christa L Fischer; Taneja, Sunita; Lamberti, Laura M; Black, Robert E; Mazumder, Sarmila

2015-12-01

In Bihar, India, a new initiative to enhance diarrhea treatment with zinc and ORS in the public sector was rolled out in selected districts. We conducted an external evaluation to measure changes in diarrhea careseeking and treatment in intervention districts. We conducted baseline and endline household surveys among caregivers of children 2-59 months of age. We calculated summary statistics for household characteristics, knowledge, careseeking and treatments given to children with a diarrhea episode in the last 14 days and built logistic regression models to compare baseline and endline values. Caregivers named a public health center as an appropriate source of care for childhood diarrhea more often at endline (71.3%) compared to baseline (38.4%) but did not report increased careseeking to public sector providers for the current diarrhea episode. In logistic regression analyses, the odds of receiving zinc, with or without oral rehydration salts (ORS), increased at endline by more than 2.7 as compared to baseline. Children who were taken to the public sector for care were more likely to receive zinc (odds ratio, OR = 3.93) and zinc in addition to ORS (OR = 6.10) compared to children who were not taken to the public sector. Coverage of zinc and ORS can improve with public sector programs targeted at training and increasing product availability, but demand creation may be needed to increase public sector careseeking in areas where the private sector has historically provided much of the care.

Participation and Sector Selection in Nicaragua

DEFF Research Database (Denmark)

Pozzoli, Dario; Ranzani, Marco

This paper investigates the structure of the labor market in Nicaragua and is aimed at understanding the determinants of the choice between a number of segments, namely inactivity, unemployment, agriculture, formal and informal sector. In addition, a model with a separate participation equation...

Selected event reconstruction algorithms for the CBM experiment at FAIR

International Nuclear Information System (INIS)

Lebedev, Semen; Höhne, Claudia; Lebedev, Andrey; Ososkov, Gennady

2014-01-01

Development of fast and efficient event reconstruction algorithms is an important and challenging task in the Compressed Baryonic Matter (CBM) experiment at the future FAIR facility. The event reconstruction algorithms have to process terabytes of input data produced in particle collisions. In this contribution, several event reconstruction algorithms are presented. Optimization of the algorithms in the following CBM detectors are discussed: Ring Imaging Cherenkov (RICH) detector, Transition Radiation Detectors (TRD) and Muon Chamber (MUCH). The ring reconstruction algorithm in the RICH is discussed. In TRD and MUCH track reconstruction algorithms are based on track following and Kalman Filter methods. All algorithms were significantly optimized to achieve maximum speed up and minimum memory consumption. Obtained results showed that a significant speed up factor for all algorithms was achieved and the reconstruction efficiency stays at high level.

The European Bank for Reconstruction and Development in partnership with Lithuania targeting full technical and industrial participation in the development of the energy sector

International Nuclear Information System (INIS)

Jahnke, J.

2000-01-01

Policy of the European Bank for Reconstruction and Development (EBRD) in Lithuanian energy sector is described. Since 1994 EBRD take active part in financing of safety upgrades of Ignalina NPP. When in 1999 political decision was made to shut down unit 1 of Ignalina NPP EBRD is prepared to take part in co-financing of decommissioning of unit 1. A special fund - International Ignalina decommissioning support fund - was established under the auspice of EBRD recently. Developed countries, international organisation will be contributors to this fund and EBRD will be managing this fund

Public sector scale–up of zinc and ORS improves coverage in selected districts in Bihar, India

Directory of Open Access Journals (Sweden)

Christa L. Fischer Walker

2015-02-01

Full Text Available In Bihar, India, a new initiative to enhance diarrhea treatment with zinc and ORS in the public sector was rolled out in selected districts. We conducted an external evaluation to measure changes in diarrhea careseeking and treatment in intervention districts. We conducted baseline and endline household surveys among caregivers of children 2–59 months of age. We calculated summary statistics for household characteristics, knowledge, careseeking and treatments given to children with a diarrhea episode in the last 14 days and built logistic regression models to compare baseline and endline values. Caregivers named a public health center as an appropriate source of care for childhood diarrhea more often at endline (71.3% compared to baseline (38.4% but did not report increased careseeking to public sector providers for the current diarrhea episode. In logistic regression analyses, the odds of receiving zinc, with or without oral rehydration salts (ORS, increased at endline by more than 2.7 as compared to baseline. Children who were taken to the public sector for care were more likely to receive zinc (odds ratio, OR = 3.93 and zinc in addition to ORS (OR = 6.10 compared to children who were not taken to the public sector. Coverage of zinc and ORS can improve with public sector programs targeted at training and increasing product availability, but demand creation may be needed to increase public sector careseeking in areas where the private sector has historically provided much of the care.

Muon track reconstruction and data selection techniques in AMANDA

International Nuclear Information System (INIS)

Ahrens, J.; Bai, X.; Bay, R.; Barwick, S.W.; Becka, T.; Becker, J.K.; Becker, K.-H.; Bernardini, E.; Bertrand, D.; Biron, A.; Boersma, D.J.; Boeser, S.; Botner, O.; Bouchta, A.; Bouhali, O.; Burgess, T.; Carius, S.; Castermans, T.; Chirkin, D.; Collin, B.; Conrad, J.; Cooley, J.; Cowen, D.F.; Davour, A.; De Clercq, C.; DeYoung, T.; Desiati, P.; Dewulf, J.-P.; Ekstroem, P.; Feser, T.; Gaug, M.; Gaisser, T.K.; Ganugapati, R.; Geenen, H.; Gerhardt, L.; Gross, A.; Goldschmidt, A.; Hallgren, A.; Halzen, F.; Hanson, K.; Hardtke, R.; Harenberg, T.; Hauschildt, T.; Helbing, K.; Hellwig, M.; Herquet, P.; Hill, G.C.; Hubert, D.; Hughey, B.; Hulth, P.O.; Hultqvist, K.; Hundertmark, S.; Jacobsen, J.; Karle, A.; Kestel, M.; Koepke, L.; Kowalski, M.; Kuehn, K.; Lamoureux, J.I.; Leich, H.; Leuthold, M.; Lindahl, P.; Liubarsky, I.; Madsen, J.; Marciniewski, P.; Matis, H.S.; McParland, C.P.; Messarius, T.; Minaeva, Y.; Miocinovic, P.; Mock, P.C.; Morse, R.; Muenich, K.S.; Nam, J.; Nahnhauer, R.; Neunhoeffer, T.; Niessen, P.; Nygren, D.R.; Oegelman, H.; Olbrechts, Ph.; Perez de los Heros, C.; Pohl, A.C.; Porrata, R.; Price, P.B.; Przybylski, G.T.; Rawlins, K.; Resconi, E.; Rhode, W.; Ribordy, M.; Richter, S.; Rodriguez Martino, J.; Ross, D.; Sander, H.-G.; Schinarakis, K.; Schlenstedt, S.; Schmidt, T.; Schneider, D.; Schwarz, R.; Silvestri, A.; Solarz, M.; Spiczak, G.M.; Spiering, C.; Stamatikos, M.; Steele, D.; Steffen, P.; Stokstad, R.G.; Sulanke, K.-H.; Streicher, O.; Taboada, I.; Thollander, L.; Tilav, S.; Wagner, W.; Walck, C.; Wang, Y.-R.; Wiebusch, C.H.; Wiedemann, C.; Wischnewski, R.; Wissing, H.; Woschnagg, K.; Yodh, G.

2004-01-01

The Antarctic Muon And Neutrino Detector Array (AMANDA) is a high-energy neutrino telescope operating at the geographic South Pole. It is a lattice of photo-multiplier tubes buried deep in the polar ice between 1500 and 2000 m. The primary goal of this detector is to discover astrophysical sources of high-energy neutrinos. A high-energy muon neutrino coming through the earth from the Northern Hemisphere can be identified by the secondary muon moving upward through the detector. The muon tracks are reconstructed with a maximum likelihood method. It models the arrival times and amplitudes of Cherenkov photons registered by the photo-multipliers. This paper describes the different methods of reconstruction, which have been successfully implemented within AMANDA. Strategies for optimizing the reconstruction performance and rejecting background are presented. For a typical analysis procedure the direction of tracks are reconstructed with about 2 deg. accuracy

Building Capacity in the Public Utility Sectors of Basra, Iraq

National Research Council Canada - National Science Library

Trainor, Tim; Henderson, Dale

2007-01-01

... in provincial reconstruction efforts. Specifically, the mission was to assist in building the capacity of the public sector utility leadership in project prioritization, project planning and project management in order to enhance...

Amplitude-based data selection for optimal retrospective reconstruction in micro-SPECT

Science.gov (United States)

Breuilly, M.; Malandain, G.; Guglielmi, J.; Marsault, R.; Pourcher, T.; Franken, P. R.; Darcourt, J.

2013-04-01

Respiratory motion can blur the tomographic reconstruction of positron emission tomography or single-photon emission computed tomography (SPECT) images, which subsequently impair quantitative measurements, e.g. in the upper abdomen area. Respiratory signal phase-based gated reconstruction addresses this problem, but deteriorates the signal-to-noise ratio (SNR) and other intensity-based quality measures. This paper proposes a 3D reconstruction method dedicated to micro-SPECT imaging of mice. From a 4D acquisition, the phase images exhibiting motion are identified and the associated list-mode data are discarded, which enables the reconstruction of a 3D image without respiratory artefacts. The proposed method allows a motion-free reconstruction exhibiting both satisfactory count statistics and accuracy of measures. With respect to standard 3D reconstruction (non-gated 3D reconstruction) without breathing motion correction, an increase of 14.6% of the mean standardized uptake value has been observed, while, with respect to a gated 4D reconstruction, up to 60% less noise and an increase of up to 124% of the SNR have been demonstrated.

POLICIES OF RETAIL SECTOR OF INDIA AND OTHER SELECTED COUNTRIES

Directory of Open Access Journals (Sweden)

Mukherjee Subhadip

2011-12-01

Full Text Available The retail sector is one of the fastest growing sectors in India. Before 1991, the retail sector was mainly unorganized and fragmented. The rapid growth of the organized retail sector has resulted in the decreasing sales of unorganized retail outlets. Along with that, the traditional unorganized retailers were lagging behind in the context of promotional strategies. This study intends to examine the government policies of different countries including India regarding the unorganized and organized retail sector. The present study examines whether the government provides a tight legal framework along with economic support to the small and unorganized retailers to sustain in this big fight. The study concludes that in the environment of intense competition, governments of different countries (including India had helped small as well as big domestic retail chains through formulating appropriate policies over time. The governments had helped domestic retail chains by providing capital support and/or formulating strict legislations to restrict entry of foreign retailers in their respective countries. In India, all the regulations regarding retail sector is still in state level and is being influenced by the existing political parties of different states. Thus, it varies across states and their impacts are also heterogeneous.

Evidence-Based ACL Reconstruction

Directory of Open Access Journals (Sweden)

E. Carlos RODRIGUEZ-MERCHAN

2015-01-01

Full Text Available There is controversy in the literature regarding a number of topics related to anterior cruciate ligament (ACLreconstruction. The purpose of this article is to answer the following questions: 1 Bone patellar tendon bone (BPTB reconstruction or hamstring reconstruction (HR; 2 Double bundle or single bundle; 3 Allograft or authograft; 4 Early or late reconstruction; 5 Rate of return to sports after ACL reconstruction; 6 Rate of osteoarthritis after ACL reconstruction. A Cochrane Library and PubMed (MEDLINE search of systematic reviews and meta-analysis related to ACL reconstruction was performed. The key words were: ACL reconstruction, systematic reviews and meta-analysis. The main criteria for selection were that the articles were systematic reviews and meta-analysesfocused on the aforementioned questions. Sixty-nine articles were found, but only 26 were selected and reviewed because they had a high grade (I-II of evidence. BPTB-R was associated with better postoperative knee stability but with a higher rate of morbidity. However, the results of both procedures in terms of functional outcome in the long-term were similar. The double-bundle ACL reconstruction technique showed better outcomes in rotational laxity, although functional recovery was similar between single-bundle and double-bundle. Autograft yielded better results than allograft. There was no difference between early and delayed reconstruction. 82% of patients were able to return to some kind of sport participation. 28% of patients presented radiological signs of osteoarthritis with a follow-up of minimum 10 years.

Iterative reconstruction reduces abdominal CT dose

International Nuclear Information System (INIS)

Martinsen, Anne Catrine Trægde; Sæther, Hilde Kjernlie; Hol, Per Kristian; Olsen, Dag Rune; Skaane, Per

2012-01-01

Objective: In medical imaging, lowering radiation dose from computed tomography scanning, without reducing diagnostic performance is a desired achievement. Iterative image reconstruction may be one tool to achieve dose reduction. This study reports the diagnostic performance using a blending of 50% statistical iterative reconstruction (ASIR) and filtered back projection reconstruction (FBP) compared to standard FBP image reconstruction at different dose levels for liver phantom examinations. Methods: An anthropomorphic liver phantom was scanned at 250, 185, 155, 140, 120 and 100 mA s, on a 64-slice GE Lightspeed VCT scanner. All scans were reconstructed with ASIR and FBP. Four readers evaluated independently on a 5-point scale 21 images, each containing 32 test sectors. In total 672 areas were assessed. ROC analysis was used to evaluate the differences. Results: There was a difference in AUC between the 250 mA s FBP images and the 120 and 100 mA s FBP images. ASIR reconstruction gave a significantly higher diagnostic performance compared to standard reconstruction at 100 mA s. Conclusion: A blending of 50–90% ASIR and FBP may improve image quality of low dose CT examinations of the liver, and thus give a potential for reducing radiation dose.

CHANGES IN PRODUCTIVITY OF SELECTED BRANCHES OF THE POLISH FOOD SECTOR IN THE YEARS 2004–2013

Directory of Open Access Journals (Sweden)

Joanna Baran

2016-09-01

Full Text Available The aim of this paper is to specify changes in productivity of the Polish food sector as a whole and its selected branches in the years 2004–2013. Analyses were conducted based on the Malmquist Productivity Index (MPI. In the MPI model the following variables were adopted: the output – sold production (million PLN, inputs – average number of employees (thous and gross value of fi xed assets (million PLN. It was confi rmed that productivity of the Polish food sector improved in the years 2004–2013. Results of analyses showed that changes in technical effi ciency had a greater eff ect on changes in food sector productivity in Poland – particularly in the fi rst period following Poland’s accession to the EU and starting from 2009, i.e. the outbreak of the economic crisis. Technical change had a considerable eff ect on the improvement of productivity in the food sector only in the years 2006– 2008. The greatest mean annual improvement in productivity in the analysed period was observed in meat and milk processing and beverage production

Body mass reconstruction on the basis of selected skeletal traits.

Science.gov (United States)

Myszka, Anna; Piontek, Janusz; Vancata, Vaclav

2012-07-01

The objective of this paper is: to estimate the body mass of the skeletons with the mechanical method (femoral head body mass estimation method--FH) and non-mechanical method (stature/living bi-iliac breadth body mass estimation method--ST/LBIB); to compare the reliability and potential use of results obtained with both methods. The material (46 skeletons, 26 males, 20 females) used in the study came from the medieval burial ground in Cedynia, Poland. Body mass reconstruction according to non-mechanical method was made using equations proposed by Ruff et al. (2005). Body mass estimation based on the mechanical method was calculated using formulas proposed by Ruff et al. (1995). In the mechanical body mass reconstruction method, femoral superoinferior breadth was used. Reconstruction of body weight using the non-mechanical method was based on maximum pelvic breadth and reconstructed body height. The correlation between bi-iliac breadth and femoral head measurements and the correlation between femoral head and reconstructed body height were also calculated. The significance of differences between the body mass of male and female individuals was tested with the Mann-Whitney U-test. The significance of differences between body mass values obtained with the mechanical (FH) and the non-mechanical method (ST/ LBIB) was tested using Pearson's correlation. The same test was used for the calculation of the relationship between bi-iliac breadth and femoral head measurements and between femoral head and reconstructed body height. In contrast to females, in males there is no statistically significant correlation between body mass estimated with the mechanical method (FH) and the non-mechanical method (ST/LBIB). In both sexes there was not statistically significant correlation between bi-iliac breadth and femoral head measurements. Only in the females group the correlation between femoral head and reconstructed body height was statistically significant. It is worth to continue

Agricultural sector

International Nuclear Information System (INIS)

Ainul Hayati Daud; Hazmimi Kasim

2010-01-01

The applications of nuclear technology in agriculture sector cover the use of the technology at every aspects of agricultural activity, starting from the seed to harvesting as well as the management of plantations itself. In this sector, a total of 55 entities comprising 17 public agencies and 38 private companies were selected for the study. Almost all, 91 % of them are located in Peninsular Malaysia; the rest operates in Sabah and Sarawak. The findings of the study in the public agencies and private companies are presented in the next sections. (author)

Selecting International Standards for Accrual-Based Accounting in the Public Sector

DEFF Research Database (Denmark)

Pontoppidan, Caroline Aggestam

2011-01-01

The article discusses the definition of a government business enterprise (GBE), as provided in the International Public Sector Accounting Standards (IPSAS), as a determinant for applying IPSAS or the International Financial Reporting Standards (IFRS) for a public sector entity. The work...... of the IPSASB is focused on the accounting and financial reporting needs of national, regional and local governments, and related governmental agencies, while the IFRS serves the private sector....

Vacuum status-display and sector-conditioning programs

International Nuclear Information System (INIS)

Skelly, J.; Yen, S.

1989-01-01

Two programs have been developed for observation and control of the AGS vacuum system, which include these notable features: they incorporate a graphical user interface, and they are driven by a relational database which describes the vacuum system. The vacuum system comprises some 440 devices organized into 28 vacuum sectors. The Status Display Program invites menu selection of a sector, interrogates the relational database for relevant vacuum devices, acquires live readbacks, and posts a graphical display of their status. The Sector Conditioning Program likewise invites sector selection, produces the same status display, and also implements process control logic on the sector devices to pump the sector down from atmospheric pressure to high vacuum over a period extending for several hours. As additional devices are installed in the vacuum system, the devices are likewise added to the relational database; these programs then automatically include the new devices. 2 refs., 1 fig

“Crossing over”: appropriate private sector principles, to operate more reliable public sector water services

OpenAIRE

Kevin Wall

2008-01-01

Private sector institutions utilise many different business methods, some of which can selectively be adapted for use by organisations outside the private sector, to the benefit of their service delivery responsibilities. But the best of the appropriate practices from the private sector have often “not crossed over”. The Water Research Commission (WRC) of South Africa, working in collaboration with the Council for Scientific and Industrial Research (CSIR), finds that the concept of franch...

Direct iterative reconstruction of computed tomography trajectories (DIRECTT)

International Nuclear Information System (INIS)

Lange, A.; Hentschel, M.P.; Schors, J.

2004-01-01

The direct reconstruction approach employs an iterative procedure by selection of and angular averaging over projected trajectory data of volume elements. This avoids the blur effects of the classical Fourier method due to the sampling theorem. But longer computing time is required. The reconstructed tomographic images reveal at least the spatial resolution of the radiation detector. Any set of projection angles may be selected for the measurements. Limited rotation of the object yields still good reconstruction of details. Projections of a partial region of the object can be reconstructed without additional artifacts thus reducing the overall radiation dose. Noisy signal data from low dose irradiation have low impact on spatial resolution. The image quality is monitored during all iteration steps and is pre-selected according to the specific requirements. DIRECTT can be applied independently from the measurement equipment in addition to conventional reconstruction or as a refinement filter. (author)

Industrial sector

International Nuclear Information System (INIS)

Ainul Hayati Daud; Hazmimi Kasim

2010-01-01

The industrial sector is categorized as related to among others, the provision of technical and engineering services, supply of products, testing and troubleshooting of parts, systems and industrial plants, quality control and assurance as well as manufacturing and processing. A total of 161 entities comprising 47 public agencies and 114 private companies were selected for the study in this sector. The majority of the public agencies, 87 %, operate in Peninsular Malaysia. The remainders were located in Sabah and Sarawak. The findings of the study on both public agencies and private companies are presented in subsequent sections of this chapter. (author)

Selective Tree-ring Models: A Novel Method for Reconstructing Streamflow Using Tree Rings

Science.gov (United States)

Foard, M. B.; Nelson, A. S.; Harley, G. L.

2017-12-01

Surface water is among the most instrumental and vulnerable resources in the Northwest United States (NW). Recent observations show that overall water quantity is declining in streams across the region, while extreme flooding events occur more frequently. Historical streamflow models inform probabilities of extreme flow events (flood or drought) by describing frequency and duration of past events. There are numerous examples of tree-rings being utilized to reconstruct streamflow in the NW. These models confirm that tree-rings are highly accurate at predicting streamflow, however there are many nuances that limit their applicability through time and space. For example, most models predict streamflow from hydrologically altered rivers (e.g. dammed, channelized) which may hinder our ability to predict natural prehistoric flow. They also have a tendency to over/under-predict extreme flow events. Moreover, they often neglect to capture the changing relationships between tree-growth and streamflow over time and space. To address these limitations, we utilized national tree-ring and streamflow archives to investigate the relationships between the growth of multiple coniferous species and free-flowing streams across the NW using novel species-and site-specific streamflow models - a term we coined"selective tree-ring models." Correlation function analysis and regression modeling were used to evaluate the strengths and directions of the flow-growth relationships. Species with significant relationships in the same direction were identified as strong candidates for selective models. Temporal and spatial patterns of these relationships were examined using running correlations and inverse distance weighting interpolation, respectively. Our early results indicate that (1) species adapted to extreme climates (e.g. hot-dry, cold-wet) exhibit the most consistent relationships across space, (2) these relationships weaken in locations with mild climatic variability, and (3) some

Medial patellofemoral ligament reconstruction: patient selection and perspectives

Directory of Open Access Journals (Sweden)

Baer MR

2017-09-01

Full Text Available Michael R. Baer, Jeffrey A. Macalena Department of Orthopaedic Surgery, University of Minnesota, Minneapolis, MN, USA Abstract: Patellofemoral instability is a painful and often recurring disorder with many negative long-term consequences. After a period of failed nonoperative management, surgical intervention has been used to reduce the incidence of patellar subluxation and dislocations. Medial patellofemoral ligament (MPFL reconstruction successfully addresses patellofemoral instability by restoring the deficient primary medial patellar soft tissue restraint. When planning MPFL reconstruction for instability, it is imperative to consider the patient’s unique anatomy including the tibial tuberosity–trochlear groove (TT–TG distance, trochlear dysplasia, and patella alta. Additionally, it is important to individualize surgical treatment in the skeletally immature, hypermobile, and athletic populations. Keywords: MPFL, indications, considerations, contraindications

The EEC's single market and the reconstruction of the Nordic electric power sector

International Nuclear Information System (INIS)

Olsen, O.J.

1992-01-01

When the Single Market comes into operation, the author claims, vertically integrated, national and regional monopolies within the electric power sector will be abolished. The nature of the new organization of this sector is as yet unclear. The Nordic countries are beginning to prepare themselves for the new situation. The subject of the article is this prospective development and some of the problems that will arise for the Nordic countries in this respect. The various Nordic proposals and their background are described in addition to the present conditions within the Nordic electric power sector. The special problems which may arise in relation to the Nordic adaption to the Single Market, the forms of adaption that are already beginning (adaptions of regulations, legal aspects etc.) on the part of the authorities and the electric power companies' attitudes and adaptions to expected future conditions are elucidated. (AB)

Quantum reconstruction of an intense polarization squeezed optical state

DEFF Research Database (Denmark)

Marquardt, Ch.; Heersink, J.; Dong, R.

2007-01-01

We perform a reconstruction of the polarization sector of the density matrix of an intense polarization squeezed beam starting from a complete set of Stokes measurements. By using an appropriate quasidistribution, we map this onto the Poincare space, providing a full quantum mechanical characteri...

The role of the European Bank in the energy sector

International Nuclear Information System (INIS)

Coleman, John

1994-01-01

The European Bank for Reconstruction and Development was established in 1991 and is owned by the western industrialized countries, including Canada, and the former communist countries of Europe and Central Asia. Its purpose is to assist the latter to make the transition from command to market economies in a democratic framework. In the energy sector, most of the EBRD's lending has been in the oil and gas sector in Russia, but it is open for business in other sectors and in all countries of operation. Unlike other development banks, the EBRD is prepared to finance nuclear power projects. The bank is also prepared to finance conventional power plants where these would permit the closure of obsolete or unsafe nuclear plants. In the oil and gas sector, most of the EBRD's lending has related to private sector, joint venture projects aimed at oil field rehabilitation and development. The private sector ventures supported by the Bank normally involve joint stock companies owned 50 per cent by western partners and 50 per cent by Russian state oil companies, which are being privatized or are operating according to private sector principles. (author)

Outcome, Cost, and Oversight of Electricity-Sector Reconstruction Contract With Perini Corporation

National Research Council Canada - National Science Library

Warren, David R; Comfort, Benjamin; Converse, Paul; Franzen, Walt; Shimp, William; Slayton, Frank

2008-01-01

On March 24, 2008, Mr. Paul Converse, an auditor serving with the Special Inspector General for Iraq Reconstruction and a member of the audit team responsible for this report died of wounds sustained in Baghdad, Iraq...

DEVELOPMENT OF METHODS OF ESTIMATION, ANALYSIS, SUBSTANTIATION AND SELECTION OF ORGANIZATIONAL AND TECHNOLOGICAL DECISIONS FOR RECONSTRUCTION OF INDUSTRIAL ENTERPRISES

Directory of Open Access Journals (Sweden)

SIEDIN V. L.

2017-02-01

Full Text Available Raising of problem. Over the past decade, changes in the economy have led to the decline of many industrial enterprises, which in turn led to the emergence of abandoned buildings and degraded areas that create a social and environmental hazard. Accordingly, the buildings and structures of such enterprises do not function and need reconstruction. Purpose of the aricle. Study of the development of methods for assessing, analyzing, substantiating and selecting rational organizational and technological decisions for the reconstruction of industrial enterprises. Conclusion. With the aim of transforming degraded and disordered territories into modern centers of vital activity, it is necessary to identify in each populated area the areas of priority renovation and reconstruction, and also to concentrate budgetary funds and private investments for the implementation of such projects. In the implementation of the above measures, the settlements will be systematically updated in accordance with european standards.

The World Bank's financial support to the petroleum sector in developing countries

International Nuclear Information System (INIS)

Mayorga-Alba, E.; Smith, S.

1996-01-01

This paper presents the World Bank Group's role in the petroleum sector of developing countries. It addresses separately the role of the International Bank for Reconstruction and Development (IBRD), the International Finance Corporation (IFC) and the Multilateral Investment Guarantee Agency (MIGA) in the upstream, downstream, and natural gas subsectors. Using specific examples, it describes the World Bank's role in promotion exercises, infrastructure projects, policy reform, mobilization of the private sector, and provision of political risk insurance. Considering that bank lending in the hydrocarbon sector meets only about 1 % of the industry's capital requirements, the paper argues that the World Bank Group is best suited to use its unique resources to catalyze private sector investment and to provide an environment conducive to market-driven development. 4 refs

Liquidity Determinants of the Selected Banking Sectors and their Size Groups

Directory of Open Access Journals (Sweden)

Jana Laštůvková

2016-01-01

Full Text Available The article focuses on the factors affecting the liquidity of selected bank sectors, as well as their size groups, using panel regression analysis. For higher complexity of the results, multiple dependent variables are used: liquidity creation, outflow and net change. The values are calculated based on the specific method of liquidity risk measurement – gross liquidity flows. The results indicate both multiple effects of some factors on the given variables, as well as isolated influence of factors on a single liquidity form or size group. Thus, when looking for determinants using just one form of liquidity, such as creation, the results need not necessarily comprehensively show the influence of the given factors, and can lead to erroneous conclusions. The results also point to the differing behaviours of the size groups and their different sensitivity on the factors; smaller banks have shown higher sensitivity on macroeconomic variables. Higher flexibility in regulation could lead to higher optimization.

Cross-talk free selective reconstruction of individual objects from multiplexed optical field data

Science.gov (United States)

Zea, Alejandro Velez; Barrera, John Fredy; Torroba, Roberto

2018-01-01

In this paper we present a data multiplexing method for simultaneous storage in a single package composed by several optical fields of tridimensional (3D) objects, and their individual cross-talk free retrieval. Optical field data are extracted from off axis Fourier holograms, and then sampled by multiplying them with random binary masks. The resulting sampled optical fields can be used to reconstruct the original objects. Sampling causes a loss of quality that can be controlled by the number of white pixels in the binary masks and by applying a padding procedure on the optical field data. This process can be performed using a different binary mask for each optical field, and then added to form a multiplexed package. With the adequate choice of sampling and padding, we can achieve a volume reduction in the multiplexed package over the addition of all individual optical fields. Moreover, the package can be multiplied by a binary mask to select a specific optical field, and after the reconstruction procedure, the corresponding 3D object is recovered without any cross-talk. We demonstrate the effectiveness of our proposal for data compression with a comparison with discrete cosine transform filtering. Experimental results confirm the validity of our proposal.

Implementation of multi-criteria decision making approach for the team leader selection in IT sector

Directory of Open Access Journals (Sweden)

Sandhya

2016-12-01

Full Text Available In the era of technology, the demand of the software development increases at a very high speed, as software has touched the human’s life in all aspects. The better quality software development acquiring minimum development time leads to the team work in which a group of people has been formed that work together in a team for the software development. One of the most signifi-cant issues in effective and efficient teamwork is the team leader selection because the team lead-er is the person in any team that is going to handle all types of managerial activities such as lead-ership, motivation to others, etc. The team leader selection process may be dependent on numer-ous conflicting selection indexes that make it a Multi-Criteria Decision Making (MCDM prob-lem. In the present research, an MCDM approach namely, Euclidean Distance Based Approxi-mation (EDBA which is based on the calculation of the composite distance value for each alter-native from a hypothetical optimal point is presented. The result of this study provides a compre-hensive ranking of team leaders that leads to the right selection of team leader in information technology (IT sector.

Reconstruction of the midface and maxilla.

Science.gov (United States)

Dalgorf, Dustin; Higgins, Kevin

2008-08-01

To review the current classification systems and reconstructive options available for restoration of maxillectomy defects. Defects involving the midface can have a great functional and aesthetic impact on the patient. Adequate restoration of the complex three-dimensional maxillary structure is required to replace form and function of the native tissue. An in-depth discussion of appropriate recipient vessel selection and reconstructive options are included in this article. The superficial temporal vessel system is presented as a reliable anastomosis site for restoration of midfacial defects. In addition, the complications of vein grafting, arteriovenous fistula loops and alternative recipient vessels sites are addressed to manage the challenge of the vessel-depleted neck. The current indications, advantages and disadvantages of local, regional and free-flap reconstructive options available for maxillectomy defects are highlighted in order to aid the surgeon in appropriate flap selection. A myriad of reconstructive options are available to restore maxillectomy defects. The surgeon must consider each defect and the needs of the individual patient when choosing the best suited reconstructive technique.

The Effects of Domestic Macroeconomic Determinants on Stock Returns: A Sector Level Analysis

Directory of Open Access Journals (Sweden)

Şerife Özlen

2014-08-01

Full Text Available Investment analysis should be carefully performed in stock markets. Therefore, firms take necessary actions according to stock market behavior and macroeconomic variables. Therefore, the predictability of stock market determinants becomes important. This study aims to identify the effects of selected macroeconomic factors (interest rate, exchange rates, inflation-consumer price index, current account deficit, unemployment rates and sector indices on stock returns of selected 48 companies in 11 different sectors of Istanbul Stock Exchange including electric, food, communication, paper, chemistry, metal-main, metal-product, stone, textile, commerce and transportation sectors. The study employs ARDL approach on the period between the second month of 2005 and the second month of 2012 including 85 monthly observations. According to the results, Sector Indices are found to be quite influential through the selected sectors. Exchanges rate is also significantly influential on almost all the sectors except Communication and Textile sectors. The impacts of Interest Rate, Inflation Rate, Current Account Deficit, and Unemployment Rate are various through the selected sectors. Moreover, the influence of Istanbul Stock Exchange Market on the stock returns of considered companies is significantly clear through the sectors except six companies (two companies from Paper sector, one company from Metal-Main sector, two companies from Stone sector and one company from Textile sector out of 48 companies. Since it includes a wide range of companies and sectors, this study is expected to be useful for all policy makers and investment decisions.

High resolution reconstruction of monthly precipitation of Iberian Peninsula using circulation weather types

Science.gov (United States)

Cortesi, N.; Trigo, R.; Gonzalez-Hidalgo, J. C.; Ramos, A. M.

2012-06-01

Precipitation over the Iberian Peninsula (IP) is highly variable and shows large spatial contrasts between wet mountainous regions, to the north, and dry regions in the inland plains and southern areas. In this work, a high-density monthly precipitation dataset for the IP was coupled with a set of 26 atmospheric circulation weather types (Trigo and DaCamara, 2000) to reconstruct Iberian monthly precipitation from October to May with a very high resolution of 3030 precipitation series (overall mean density one station each 200 km2). A stepwise linear regression model with forward selection was used to develop monthly reconstructed precipitation series calibrated and validated over 1948-2003 period. Validation was conducted by means of a leave-one-out cross-validation over the calibration period. The results show a good model performance for selected months, with a mean coefficient of variation (CV) around 0.6 for validation period, being particularly robust over the western and central sectors of IP, while the predicted values in the Mediterranean and northern coastal areas are less acute. We show for three long stations (Lisbon, Madrid and Valencia) the comparison between model and original data as an example to how these models can be used in order to obtain monthly precipitation fields since the 1850s over most of IP for this very high density network.

Designing a guideline for selecting a supplier for an agile fixed budget & resource contract in the public sector

DEFF Research Database (Denmark)

Pries-Heje, Lene; Pries-Heje, Jan

2014-01-01

A classic contract for IS between a supplier and a public sector institution based on a requirements specification is well suited for a stable situation. However, if you have to accept many changes or have ambiguous requirements then you may end up with “endless” re-negotiation of the requirements...... and the technical support structure. This paper presents a case where that was done. We analyse the case using the iron triangle for projects as our theoretical lens and design a guideline for how to implement a fixed budget and resources contract in the public sector. The guideline includes elements to cope...... with challenges in a tender process such as transparency, criteria for supplier selection, and live assessment of resource skills and capabilities, as well as achieving the flexibility for change needed....

Interactive reconstruction in single-photon tomography

International Nuclear Information System (INIS)

Miller, T.R.; Wallis, J.W.; Wilson, A.D.

1989-01-01

A new method is described to allow interactive selection of the reconstruction filter at the time of interpretation of images from single-photon tomography. In the filtered back projection algorithm, the only part of the reconstruction process requiring user interaction is the selection of the window function. Since the ramp and window filters have different purposes, they can be separated, placing the window at the end of the reconstruction process as a three-dimensional filter. All stages of reconstruction except the window filtering are performed before the physician begins to interpret the study. The three-dimensional filtering is performed very rapidly with use of the Chebyshev convolution algorithm. A 64 x 64 x 64 pixel cube of data is filtered in 13-33 s using filters of 3-11 lengths. Smaller volumes of image data can be filtered in less than 1 s; thus, the user can interactively choose any desired filter for a given tomographic study at the time of interpretation of the images. (orig.)

Online Event Reconstruction in the CBM Experiment at FAIR

Science.gov (United States)

Akishina, Valentina; Kisel, Ivan

2018-02-01

Targeting for rare observables, the CBM experiment will operate at high interaction rates of up to 10 MHz, which is unprecedented in heavy-ion experiments so far. It requires a novel free-streaming readout system and a new concept of data processing. The huge data rates of the CBM experiment will be reduced online to the recordable rate before saving the data to the mass storage. Full collision reconstruction and selection will be performed online in a dedicated processor farm. In order to make an efficient event selection online a clean sample of particles has to be provided by the reconstruction package called First Level Event Selection (FLES). The FLES reconstruction and selection package consists of several modules: track finding, track fitting, event building, short-lived particles finding, and event selection. Since detector measurements contain also time information, the event building is done at all stages of the reconstruction process. The input data are distributed within the FLES farm in a form of time-slices. A time-slice is reconstructed in parallel between processor cores. After all tracks of the whole time-slice are found and fitted, they are collected into clusters of tracks originated from common primary vertices, which then are fitted, thus identifying the interaction points. Secondary tracks are associated with primary vertices according to their estimated production time. After that short-lived particles are found and the full event building process is finished. The last stage of the FLES package is a selection of events according to the requested trigger signatures. The event reconstruction procedure and the results of its application to simulated collisions in the CBM detector setup are presented and discussed in detail.

Employment in the research and development sector in selected countries of the European Union and the world

Directory of Open Access Journals (Sweden)

Anna Turczak

2017-07-01

Full Text Available The aim of this article is to determine how particular factors affect the diversity of countries in terms of the number of employees in the research and development (R&D sector compared with the number of their overall populations. Two factors are analysed in the study: the proportion of employment in the R&D sector to the total number of people employed (i.e. the factor showing the importance given to R&D in the country concerned and the proportion of the total number of people employed to the number of inhabitants aged 15 and more (i.e. the employment rate. The logarithmic method has been used to assess the impact of deviations of these factors on the deviation of employment in the R&D sector in relation to the number of inhabitants. The causal analysis has allowed for answering the question of how each factor affects the variable in the selected twenty-six countries of the European Union and the world, i.e. what are the direction and strength of the influence. The results obtained for Poland are compared with those received for other countries covered by the analysis and the final conclusions are drawn on this basis.

Energy reconstruction in the long-baseline neutrino experiment.

Science.gov (United States)

Mosel, U; Lalakulich, O; Gallmeister, K

2014-04-18

The Long-Baseline Neutrino Experiment aims at measuring fundamental physical parameters to high precision and exploring physics beyond the standard model. Nuclear targets introduce complications towards that aim. We investigate the uncertainties in the energy reconstruction, based on quasielastic scattering relations, due to nuclear effects. The reconstructed event distributions as a function of energy tend to be smeared out and shifted by several 100 MeV in their oscillatory structure if standard event selection is used. We show that a more restrictive experimental event selection offers the possibility to reach the accuracy needed for a determination of the mass ordering and the CP-violating phase. Quasielastic-based energy reconstruction could thus be a viable alternative to the calorimetric reconstruction also at higher energies.

Study of DNA reconstruction enzymes

Energy Technology Data Exchange (ETDEWEB)

Sekiguchi, M [Kyushu Univ., Fukuoka (Japan). Faculty of Science

1976-12-01

Description was made of the characteristics and mechanism of 3 reconstructive enzymes which received from M. luteus or E. coli or T4, and of which natures were clarified as reconstructive enzymes of DNA irradiated with ultraviolet rays. As characteristics, the site of breaking, reaction, molecular weight, electric charge in the neutrality and a specific adhesion to DNA irradiated with ultraviolet rays were mentioned. As to mutant of ultraviolet ray sensitivity, hereditary control mechanism of removal and reconstruction by endo-nuclease activation was described, and suggestion was referred to removal and reconstruction of cells of xedoderma pigmentosum which is a hereditary disease of human. Description was also made as to the mechanism of exonuclease activation which separates dimer selectively from irradiated DNA.

Oral cavity reconstruction with the masseter flap

NARCIS (Netherlands)

Mahieu, R.; Russo, S.; Gualtieri, T.; Colletti, G.; Deganello, A.

The purpose of this report is to highlight how an unusual, outdated, unpopular and overlooked reconstructive method such as the masseter flap can be a reliable, straightforward and effective solution for oral reconstruction in selected cases. We report the transposition of the masseter crossover

Girls' perceptions of challenging work and the factors that motivate them to engage with challenging work within the selective independent sector

OpenAIRE

Hannan, G. V.

2016-01-01

This study focuses on the perceptions of challenging work amongst girls in Years 9, 10 and 11 in single-sex schools in the selective independent sector, and of the factors that they perceive motivate them to engage with challenging work. Although many girls in English selective independent schools achieve amongst the highest GCSE and A Level results in the country, some teachers at these schools are concerned that the girls can be uncomfortable when they are encouraged to think for themselves...

Track Reconstruction and b-Jet Identification for the ATLAS Trigger System

CERN Document Server

Coccaro, A; The ATLAS collaboration

2011-01-01

A sophisticated trigger system, capable of real-time track reconstruction, is in place in the ATLAS experiment, to reject most of the events containing uninteresting background collisions while preserving as much as possible the interesting physics signals. The strategy adopted for fast reconstruction of charged tracks and in particular its application to the selection of jets from the hadronization of b-quarks is reviewed. Track reconstruction is routinely used for selection based on various physics objects while b-jet triggers are actively selecting events from the beginning of the 2011 LHC data-taking campaign.

Economic potential analysis of cogeneration using natural gas in the selected sectors; Analise do potencial economico de cogeracao a gas natural nos setores selecionados

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

This chapter presents the results of the economic potential of the natural gas cogeneration under topping regime, in the selected sectors of beverage industry, editorial and graphic industries, shopping centers, hospitals and hotels.

Building and testing models with extended Higgs sectors

Science.gov (United States)

Ivanov, Igor P.

2017-07-01

Models with non-minimal Higgs sectors represent a mainstream direction in theoretical exploration of physics opportunities beyond the Standard Model. Extended scalar sectors help alleviate difficulties of the Standard Model and lead to a rich spectrum of characteristic collider signatures and astroparticle consequences. In this review, we introduce the reader to the world of extended Higgs sectors. Not pretending to exhaustively cover the entire body of literature, we walk through a selection of the most popular examples: the two- and multi-Higgs-doublet models, as well as singlet and triplet extensions. We will show how one typically builds models with extended Higgs sectors, describe the main goals and the challenges which arise on the way, and mention some methods to overcome them. We will also describe how such models can be tested, what are the key observables one focuses on, and illustrate the general strategy with a subjective selection of results.

Financial Efficacy of Selected Public and Private Sector Banks in India

OpenAIRE

M.Sakthi Vadivel; S.Ayyappan,M.Com,MPhil

2013-01-01

The  banks in India have over 67,000 branches located across the country. All these are classified  into two major categories, non-scheduled banks and scheduled banks. Scheduled banks includes   commercial banks and the co-operative banks. The public sector banks are  accountable  for more than 78 percent of total banking industry in India. Even though private sector banks came later into the market, due to their customer servicing and easy banking features they are also competing equally wit...

Automatic selection of optimal systolic and diastolic reconstruction windows for dual-source CT coronary angiography

International Nuclear Information System (INIS)

Seifarth, H.; Puesken, M.; Wienbeck, S.; Maintz, D.; Heindel, W.; Juergens, K.U.; Fischbach, R.

2009-01-01

The aim of this study was to assess the performance of a motion-map algorithm that automatically determines optimal reconstruction windows for dual-source coronary CT angiography. In datasets from 50 consecutive patients, optimal systolic and diastolic reconstruction windows were determined using the motion-map algorithm. For manual determination of the optimal reconstruction window, datasets were reconstructed in 5% steps throughout the RR interval. Motion artifacts were rated for each major coronary vessel using a five-point scale. Mean motion scores using the motion-map algorithm were 2.4 ± 0.8 for systolic reconstructions and 1.9 ± 0.8 for diastolic reconstructions. Using the manual approach, overall motion scores were significantly better (1.9 ± 0.5 and 1.7 ± 0.6, p 90% of cases using either approach. Using the automated approach, there was a negative correlation between heart rate and motion scores for systolic reconstructions (ρ = -0.26, p 80 bpm (systolic reconstruction). (orig.)

Energy demand analysis in the industrial sector

International Nuclear Information System (INIS)

Lapillone, B.

1991-01-01

This Chapter of the publication is dealing with Energy Demand Analysis in the Industrial Sector.Different estimates of energy consumption in Industry taking Thailand as an example is given. Major energy consuming industrial sectors in selected Asian countries are given. Suggestion for the analysis of the energy consumption trends in industry, whether at the overall level or at the sub-sector level (e.g. food) using the conventional approach , through energy/output ratio is given. 4 refs, 7 figs, 13 tabs

Computer Based Road Accident Reconstruction Experiences

Directory of Open Access Journals (Sweden)

Milan Batista

2005-03-01

Full Text Available Since road accident analyses and reconstructions are increasinglybased on specific computer software for simulationof vehicle d1iving dynamics and collision dynamics, and forsimulation of a set of trial runs from which the model that bestdescribes a real event can be selected, the paper presents anoverview of some computer software and methods available toaccident reconstruction experts. Besides being time-saving,when properly used such computer software can provide moreauthentic and more trustworthy accident reconstruction, thereforepractical experiences while using computer software toolsfor road accident reconstruction obtained in the TransportSafety Laboratory at the Faculty for Maritime Studies andTransport of the University of Ljubljana are presented and discussed.This paper addresses also software technology for extractingmaximum information from the accident photo-documentationto support accident reconstruction based on the simulationsoftware, as well as the field work of reconstruction expertsor police on the road accident scene defined by this technology.

Sectoral Costs of Environmental Policy. Final Report

International Nuclear Information System (INIS)

Vercaemst, P.; Vanassche, S.; Campling, P.; Vranken, L.; Agnolucci, P.; Salmons, R.; Shaw, B.; Jantzen, J.; Van der Woerd, H.; Gruenig, M.; Best, A.

2007-12-01

The Directorate General for Environment of the European Commission has launched a study on the 'Sectoral costs of environmental policy'. The overall aim of the study is to obtain a clearer picture of the impact of environmental policy in some of the industrial sectors most affected by environmental policy, taking into account the differences between sectors and Member States. Previous studies mainly focussed on the individual impact of one Directive, but in this study we will assess the cumulative costs attributable to the environmental policy in its entirety and attempt to identify synergies between individual policies. The project has the following main objectives: paint a clearer picture of the environmental costs for the selected industries; indicate the differences in costs between individual companies; indicate the differences in costs between Member States; demonstrate the drivers for environmental expenditures of the companies and differences between sectors and Member States; describe different types of environmental regulation (policy instruments) and their impact on environmental expenditures; evaluate the environmental performance of the industries and differences between companies/Member States; collect evidence for the impacts of environmental regulation (and associated costs) on the competitiveness of companies; and carry out an international comparison. The sectors selected are:oil supply chain; electricity production; steel industry; and textile and leather industry

Assessment applicability of selected models of multiple discriminant analyses to forecast financial situation of Polish wood sector enterprises

Directory of Open Access Journals (Sweden)

Adamowicz Krzysztof

2017-03-01

Full Text Available In the last three decades forecasting bankruptcy of enterprises has been an important and difficult problem, used as an impulse for many research projects (Ribeiro et al. 2012. At present many methods of bankruptcy prediction are available. In view of the specific character of economic activity in individual sectors, specialised methods adapted to a given branch of industry are being used increasingly often. For this reason an important scientific problem is related with the indication of an appropriate model or group of models to prepare forecasts for a given branch of industry. Thus research has been conducted to select an appropriate model of Multiple Discriminant Analysis (MDA, best adapted to forecasting changes in the wood industry. This study analyses 10 prediction models popular in Poland. Effectiveness of the model proposed by Jagiełło, developed for all industrial enterprises, may be labelled accidental. That model is not adapted to predict financial changes in wood sector companies in Poland.

Reconstruction and analysis of transcription factor-miRNA co-regulatory feed-forward loops in human cancers using filter-wrapper feature selection.

Directory of Open Access Journals (Sweden)

Chen Peng

Full Text Available BACKGROUND: As one of the most common types of co-regulatory motifs, feed-forward loops (FFLs control many cell functions and play an important role in human cancers. Therefore, it is crucial to reconstruct and analyze cancer-related FFLs that are controlled by transcription factor (TF and microRNA (miRNA simultaneously, in order to find out how miRNAs and TFs cooperate with each other in cancer cells and how they contribute to carcinogenesis. Current FFL studies rely on predicted regulation information and therefore suffer the false positive issue in prediction results. More critically, FFLs generated by existing approaches cannot represent the dynamic and conditional regulation relationship under different experimental conditions. METHODOLOGY/PRINCIPAL FINDINGS: In this study, we proposed a novel filter-wrapper feature selection method to accurately identify co-regulatory mechanism by incorporating prior information from predicted regulatory interactions with parallel miRNA/mRNA expression datasets. By applying this method, we reconstructed 208 and 110 TF-miRNA co-regulatory FFLs from human pan-cancer and prostate datasets, respectively. Further analysis of these cancer-related FFLs showed that the top-ranking TF STAT3 and miRNA hsa-let-7e are key regulators implicated in human cancers, which have regulated targets significantly enriched in cellular process regulations and signaling pathways that are involved in carcinogenesis. CONCLUSIONS/SIGNIFICANCE: In this study, we introduced an efficient computational approach to reconstruct co-regulatory FFLs by accurately identifying gene co-regulatory interactions. The strength of the proposed feature selection method lies in the fact it can precisely filter out false positives in predicted regulatory interactions by quantitatively modeling the complex co-regulation of target genes mediated by TFs and miRNAs simultaneously. Moreover, the proposed feature selection method can be generally applied to

European bank for reconstruction and development

Directory of Open Access Journals (Sweden)

Kastratović Radovan

2015-01-01

Full Text Available European Bank for Reconstruction and Development - EBRD was established in the year 1991 and commenced operations in 1991. The objective of the Bank was to instigate market oriented approach to business in the countries of Central and Eastern Europe. This comprises support offered to structural reforms, privatisation, and development of entrepreneurship and legal system through financing of project conducive to the achievement of the aimed targets. The Bank approves loans both to the nation states and to the private sector. European Bank for Reconstruction and Development often appears in the role of investor. In addition, the Bank has also its consultative function. Owners of the European Bank for Reconstruction and Development are the developed countries and those that participate in the distribution of the Bank's profit. The Bank invests in the countries of Central, Eastern and South-East Europe, but also in those of Central Asia and Southern Mediterranean. The importance that the European Bank for Reconstruction and Development has for our country is best illustrated by the fact that this Bank is our largest institutional investor, with investments exceeding 3.5 billion EUR. This work begins with presentation of general information on the work of the European Bank for Reconstruction and Development, its objectives, activities, background history, ownership and organisational structure. It proceeds by giving relevant data on the Bank's business operations - the manner of project financing, the Bank's funds distribution per geographic criteria and activities, and the operative and financial results of the Bank's business activities. Brief description is also offered of the cooperation that the European Bank has with other international financial institutions. Finally, data is given bearing witness on the importance that the European Bank for Reconstruction and Development has for Serbia.

Jini service to reconstruct tomographic data

Science.gov (United States)

Knoll, Peter; Mirzaei, S.; Koriska, K.; Koehn, H.

2002-06-01

A number of imaging systems rely on the reconstruction of a 3- dimensional model from its projections through the process of computed tomography (CT). In medical imaging, for example magnetic resonance imaging (MRI), positron emission tomography (PET), and Single Computer Tomography (SPECT) acquire two-dimensional projections of a three dimensional projections of a three dimensional object. In order to calculate the 3-dimensional representation of the object, i.e. its voxel distribution, several reconstruction algorithms have been developed. Currently, mainly two reconstruct use: the filtered back projection(FBP) and iterative methods. Although the quality of iterative reconstructed SPECT slices is better than that of FBP slices, such iterative algorithms are rarely used for clinical routine studies because of their low availability and increased reconstruction time. We used Jini and a self-developed iterative reconstructions algorithm to design and implement a Jini reconstruction service. With this service, the physician selects the patient study from a database and a Jini client automatically discovers the registered Jini reconstruction services in the department's Intranet. After downloading the proxy object the this Jini service, the SPECT acquisition data are reconstructed. The resulting transaxial slices are visualized using a Jini slice viewer, which can be used for various imaging modalities.

Effect of a novel motion correction algorithm (SSF) on the image quality of coronary CTA with intermediate heart rates: Segment-based and vessel-based analyses

Energy Technology Data Exchange (ETDEWEB)

Li, Qianwen, E-mail: qianwen18@126.com; Li, Pengyu, E-mail: lipyu818@gmail.com; Su, Zhuangzhi, E-mail: suzhuangzhi@xwh.ccmu.edu.cn; Yao, Xinyu, E-mail: 314985151@qq.com; Wang, Yan, E-mail: wy19851121@126.com; Wang, Chen, E-mail: fskwangchen@gmail.com; Du, Xiangying, E-mail: duxying_xw@163.com; Li, Kuncheng, E-mail: kuncheng.li@gmail.com

2014-11-15

Highlights: • SSF provided better image quality than single-sector and bi-sector reconstruction among the intermediate heart rates (65–75 bpm). • Evidence for the application of prospective ECG-triggered coronary CTA with SSF onto an expanded heart rate range. • Information about the inconsistent effectiveness of SSF among the segments of coronary artery. - Abstract: Purpose: To evaluate the effect of SnapShot Freeze (SSF) reconstruction at an intermediate heart-rate (HR) range (65–75 bpm) and compare this method with single-sector reconstruction and bi-sector reconstruction on segmental and vessel bases in retrospective coronary computed tomography angiography (CCTA). Materials and methods: Retrospective electrocardiogram-gated CCTA was performed on 37 consecutive patients with HR between 65 and 75 bpm using a 64-row CT scanner. Retrospective single-sector reconstruction, bi-sector reconstruction, and SSF were performed for each patient. Multi-phase single-sector reconstruction was performed to select the optimal phase. SSF and bi-sector images were also reconstructed at the optimal phase. The images were interpreted in an intent-to-diagnose fashion by two experienced readers using a 5-point scale, with 3 points as diagnostically acceptable. Image quality among the three reconstruction groups were compared on per-patient, per-vessel, and per-segment bases. Results: The average HR of the enrolled patients was 69.4 ± 2.7 bpm. A total of 111 vessels and 481 coronary segments were assessed. SSF provided significantly higher interpretability of the coronary segments than bi-sector reconstructions. The qualified and excellent rates of SSF (97.9% and 82.3%) were significantly higher than those of single-sector (92.9% and 66.3%) and bi-sector (90.9% and 64.7%) reconstructions. The image quality score (IQS) using SSF was also significantly higher than those of single-sector and bi-sector reconstructions both on per-patient and per-vessel bases. On per

Sectoral Innovation Watch electrical and Optical Equipment Sector. Final sector report

NARCIS (Netherlands)

Broek, T. van den; Giessen, A.M. van der

2011-01-01

The electrical and optical equipment sector is a high-tech manufacturing sector. It is one of the most innovative sectors in Europe with investments and advances in fundamental research, applied R&D and innovation in the actual use of equipment. This sector is also one of the most global sectors

Reconstruction design before tumour resection: A new concept of through-and-through cheek defect reconstruction.

Science.gov (United States)

Gong, Zhao-Jian; Ren, Zhen-Hu; Wang, Kai; Tan, Hong-Yu; Zhang, Sheng; Wu, Han-Jiang

2017-11-01

To explore a new method of reconstruction of through-and-through cheek defects and to evaluate this method's efficacy and patient prognosis. This retrospective study included 70 patients who underwent reconstruction of through-and-through cheek defects. The surgical approach, design of facial skin incisions, selection and design of flaps, postoperative quality of life and prognosis of patients were recorded and reported. Postoperative quality of life gradually increased over time, and the mean scores of University of Washington Quality of Life (UW-QOL) Questionnaire was more than 80 at 1-year postoperatively. The appearance, oral competence, chewing, swallowing, speech and other oral functions were well recovered in about 90% of patients at 1-year postoperatively. This new idea of reconstruction before tumour resection, brings the effect of plastic and reconstructive surgery to a new height. Copyright © 2017. Published by Elsevier Ltd.

New site selection for the immigrant transit of the post-disaster reconstruction of Wenchuan earthquake region

Science.gov (United States)

Yang, Wunian; Hu, Guochao; Liu, Hanhu; Peng, Li

2009-06-01

The strong earthquake struck on 12 May 2008 destroyed numerous houses in Wenchuan, Sichuan, China. This earthquake escalated the scale of existing geological disasters, undermined the stability of earthquake-prone zones, and triggered landslides and many other hidden disasters. In addition, many aftershocks and heavy rainfalls have prompted secondary disasters and consequently, the actual damages have been doubled in terms of scale and magnitude. Since some regions there are no longer appropriate for people to live, temporary housing and post-disaster reconstruction are badly needed. Recent advances in remote sensing and geospatial technologies have promoted their successful applications in siting engineering. Because of different research backgrounds, geological disasters and vegetation density were rarely incorporated as primary parameters for siting assessment. Based on the principles of avoiding active faults and encouraging synthetic prevention of geological disasters, we performed a locating analysis using part of the Wenchuan County as a case. Six major parameters were used to build a siting model, including geological disasters, vegetation index, stream systems, faults, terrain slope, and elevation. The results show that the proposed method can provide useful information for decision-making in the selection of temporary housing and post-disaster reconstruction.

Environmental logistics performance indicators affecting per capita income and sectoral growth: evidence from a panel of selected global ranked logistics countries.

Science.gov (United States)

Khan, Syed Abdul Rehman; Qianli, Dong; SongBo, Wei; Zaman, Khalid; Zhang, Yu

2017-01-01

The objective of the study is to examine the long-run and causal relationship between environmental logistics performance indicators (ELPI) and growth-specific factors in a panel of 15 selected global ranked logistics countries over a period of 2007-2015. This study is exclusive as we utilized a number of LPI factors including logistics performance, logistics competence, and logistics infrastructure with mediation of sustainable factors, i.e., carbon dioxide (CO 2 ), fossil fuel, and greenhouse gas (GHG) emissions in a region. The results show that the per capita income, industry, manufacturing, and service share to GDP is affected by CO 2 emissions and GHG emissions. Logistics competence and infrastructure promote economic growth and sectoral value added, while energy demand and FDI inflows both are prerequisite for sustainable agriculture in a region. The causal relationships confirm that more energy demand results in an increase in economic growth, industry value added, and the service sector (i.e., feedback hypothesis), while the sustainable supply chain system improves energy demand, FDI inflows, economic growth, and sectoral growth (i.e., conservation hypothesis) in a panel of countries.

Age-related deficits in selective attention during encoding increase demands on episodic reconstruction during context retrieval: An ERP study.

Science.gov (United States)

James, Taylor; Strunk, Jonathan; Arndt, Jason; Duarte, Audrey

2016-06-01

Previous event-related potential (ERP) and neuroimaging evidence suggests that directing attention toward single item-context associations compared to intra-item features at encoding improves context memory performance and reduces demands on strategic retrieval operations in young and older adults. In everyday situations, however, there are multiple event features competing for our attention. It is not currently known how selectively attending to one contextual feature while attempting to ignore another influences context memory performance and the processes that support successful retrieval in the young and old. We investigated this issue in the current ERP study. Young and older participants studied pictures of objects in the presence of two contextual features: a color and a scene, and their attention was directed to the object's relationship with one of those contexts. Participants made context memory decisions for both attended and unattended contexts and rated their confidence in those decisions. Behavioral results showed that while both groups were generally successful in applying selective attention during context encoding, older adults were less confident in their context memory decisions for attended features and showed greater dependence in context memory accuracy for attended and unattended contextual features (i.e., hyper-binding). ERP results were largely consistent between age groups but older adults showed a more pronounced late posterior negativity (LPN) implicated in episodic reconstruction processes. We conclude that age-related suppression deficits during encoding result in reduced selectivity in context memory, thereby increasing subsequent demands on episodic reconstruction processes when sought after details are not readily retrieved. Copyright © 2016 Elsevier Ltd. All rights reserved.

Breast Reconstruction Following Cancer Treatment.

Science.gov (United States)

Gerber, Bernd; Marx, Mario; Untch, Michael; Faridi, Andree

2015-08-31

About 8000 breast reconstructions after mastectomy are per - formed in Germany each year. It has become more difficult to advise patients because of the wide variety of heterologous and autologous techniques that are now available and because of changes in the recommendations about radiotherapy. This article is based on a review of pertinent articles (2005-2014) that were retrieved by a selective search employing the search terms "mastectomy" and "breast reconstruction." The goal of reconstruction is to achieve an oncologically safe and aestically satisfactory result for the patient over the long term. Heterologous, i.e., implant-based, breast reconstruction (IBR) and autologous breast reconstruction (ABR) are complementary techniques. Immediate reconstruction preserves the skin of the breast and its natural form and prevents the psychological trauma associated with mastectomy. If post-mastectomy radiotherapy (PMRT) is not indicated, implant-based reconstruction with or without a net/acellular dermal matrix (ADM) is a common option. Complications such as seroma formation, infection, and explantation are significantly more common when an ADM is used (15.3% vs. 5.4% ). If PMRT is performed, then the complication rate of implant-based breast reconstruction is 1 to 48% ; in particular, Baker grade III/IV capsular fibrosis occurs in 7 to 22% of patients, and the prosthesis must be explanted in 9 to 41% . Primary or, preferably, secondary autologous reconstruction is an alternative. The results of ABR are more stable over the long term, but the operation is markedly more complex. Autologous breast reconstruction after PMRT does not increase the risk of serious complications (20.5% vs. 17.9% without radiotherapy). No randomized controlled trials have yet been conducted to compare the reconstructive techniques with each other. If radiotherapy will not be performed, immediate reconstruction with an implant is recommended. On the other hand, if post-mastectomy radiotherapy

Environmental dose reconstruction: Approaches to an inexact science

International Nuclear Information System (INIS)

Hoffman, F.O.

1991-01-01

The endpoints of environmental dose reconstruction are quantitative yet the science is inexact. Four problems related to this issue are described. These problems are: (1) Defining the scope of the assessment and setting logical priorities for detailed investigations, (2) Recognizing the influence of investigator judgment of the results, (3) Selecting an endpoint other than dose for the assessment of multiple contaminants, and (4) Resolving the conflict between credibility and expertise in selecting individuals responsible for dose reconstruction. Approaches are recommended for dealing with each of these problems

Ways of improving preparatory stage and reconstruction of coking plants

Energy Technology Data Exchange (ETDEWEB)

Rozenfel' d, M.S.; Martynenko, V.M.; Svyatogorov, A.A.; Kvitkin, I.A.; Zhurba, A.I.; Gurtovnik, P.F.

1987-06-01

Discusses economic and technological aspects of coking plant reconstruction and modernization in the USSR. Effects of standardized technologies on plant reconstruction are analyzed. A standardized planning procedure jointly developed by research institutes in the USSR for plant modernization or reconstruction is discussed: selecting the optimum reconstruction and repair time, sequence of operations without stoppage of a coke oven battery, coke oven cooling, repair of coke oven liners, heating systems, coke oven equipment, drying, initial heating, testing battery equipment. The procedure is aimed at reducing coke losses and eliminating delays during reconstruction operations. A graphic method for modelling plant reconstruction is discussed.

Self-exclusion as a harm minimization strategy: evidence for the casino sector from selected European countries.

Science.gov (United States)

Hayer, Tobias; Meyer, Gerhard

2011-12-01

As the international gambling market continues to expand, determining effective approaches to prevent gambling-related problems becomes increasingly important. Despite a lack of in-depth research into its benefits, self-exclusion is one such measure already in use around the world in various sectors of the gambling industry. The present study is the first of its kind to examine the effectiveness of self-exclusion schemes in the casino sector in selected European countries. A written survey yielded a sample of N = 152 (self)-excluded gamblers. In addition to this cross-section analysis, a small sub-group (n = 31) was monitored over time by means of follow-up surveys carried out 1, 6, and 12 month(s) after the exclusion agreement came into force. The results reveal that the self-excluded individuals are typically under a great deal of strain and show a relatively pronounced willingness to change. However, this largely reaches its peak at the time the decision to self-exclude is made. From a longitudinal perspective, various parameters indicate a clear improvement in psychosocial functioning; a favorable effect that also starts directly after the exclusion agreement was signed. Finally, considering theoretical and empirical findings, possibilities for optimizing (self-)exclusion schemes will be discussed.

Electron Reconstruction in the CMS Electromagnetic Calorimeter

CERN Document Server

Meschi, Emilio; Seez, Christopher; Vikas, Pratibha

2001-01-01

This note describes the reconstruction of electrons using the electromagnetic calorimeter (ECAL) alone. This represents the first step in the High Level Trigger reconstruction and selection chain. By making "super-clusters" (i.e. clusters of clusters) much of the energy radiated by bremsstrahlung in the tracker material can be recovered. Representative performance figures for energy and position resolution in the barrel are given.

Studies for a common selection software environment in ATLAS from the Level-2 Trigger to the offline reconstruction

CERN Document Server

Wiedenmann, W; Baines, J T M; Bee, C P; Biglietti, M; Bogaerts, A; Boisvert, V; Bosman, M; Brandt, S; Caron, B; Casado, M P; Cataldi, G; Cavalli, D; Cervetto, M; Comune, G; Corso-Radu, A; Di Mattia, A; Díaz-Gómez, M; Dos Anjos, A; Drohan, J; Ellis, Nick; Elsing, M; Epp, B; Etienne, F; Falciano, S; Farilla, A; George, S; Ghete, V M; González, S; Grothe, M; Kaczmarska, A; Karr, K M; Khomich, A; Konstantinidis, N P; Krasny, W; Li, W; Lowe, A; Luminari, L; Meessen, C; Mello, A G; Merino, G; Morettini, P; Moyse, E; Nairz, A; Negri, A; Nikitin, N V; Nisati, A; Padilla, C; Parodi, F; Pérez-Réale, V; Pinfold, J L; Pinto, P; Polesello, G; Qian, Z; Resconi, S; Rosati, S; Scannicchio, D A; Schiavi, C; Schörner-Sadenius, T; Segura, E; De Seixas, J M; Shears, T G; Sivoklokov, S Yu; Smizanska, M; Soluk, R A; Stanescu, C; Tapprogge, Stefan; Touchard, F; Vercesi, V; Watson, A T; Wengler, T; Werner, P; Wheeler, S; Wickens, F J; Wielers, M; Zobernig, G; NSS-MIC 2003 - IEEE Nuclear Science Symposium and Medical Imaging Conference, Part 1

2004-01-01

The Atlas High Level Trigger's primary function of event selection will be accomplished with a Level-2 trigger farm and an Event Filter farm, both running software components developed in the Atlas offline reconstruction framework. While this approach provides a unified software framework for event selection, it poses strict requirements on offline components critical for the Level-2 trigger. A Level-2 decision in Atlas must typically be accomplished within 10 ms and with multiple event processing in concurrent threads. In order to address these constraints, prototypes have been developed that incorporate elements of the Atlas Data Flow -, High Level Trigger -, and offline framework software. To realize a homogeneous software environment for offline components in the High Level Trigger, the Level-2 Steering Controller was developed. With electron/gamma- and muon-selection slices it has been shown that the required performance can be reached, if the offline components used are carefully designed and optimized ...

Higher order total variation regularization for EIT reconstruction.

Science.gov (United States)

Gong, Bo; Schullcke, Benjamin; Krueger-Ziolek, Sabine; Zhang, Fan; Mueller-Lisse, Ullrich; Moeller, Knut

2018-01-08

Electrical impedance tomography (EIT) attempts to reveal the conductivity distribution of a domain based on the electrical boundary condition. This is an ill-posed inverse problem; its solution is very unstable. Total variation (TV) regularization is one of the techniques commonly employed to stabilize reconstructions. However, it is well known that TV regularization induces staircase effects, which are not realistic in clinical applications. To reduce such artifacts, modified TV regularization terms considering a higher order differential operator were developed in several previous studies. One of them is called total generalized variation (TGV) regularization. TGV regularization has been successively applied in image processing in a regular grid context. In this study, we adapted TGV regularization to the finite element model (FEM) framework for EIT reconstruction. Reconstructions using simulation and clinical data were performed. First results indicate that, in comparison to TV regularization, TGV regularization promotes more realistic images. Graphical abstract Reconstructed conductivity changes located on selected vertical lines. For each of the reconstructed images as well as the ground truth image, conductivity changes located along the selected left and right vertical lines are plotted. In these plots, the notation GT in the legend stands for ground truth, TV stands for total variation method, and TGV stands for total generalized variation method. Reconstructed conductivity distributions from the GREIT algorithm are also demonstrated.

Method for position emission mammography image reconstruction

Science.gov (United States)

Smith, Mark Frederick

2004-10-12

An image reconstruction method comprising accepting coincidence datat from either a data file or in real time from a pair of detector heads, culling event data that is outside a desired energy range, optionally saving the desired data for each detector position or for each pair of detector pixels on the two detector heads, and then reconstructing the image either by backprojection image reconstruction or by iterative image reconstruction. In the backprojection image reconstruction mode, rays are traced between centers of lines of response (LOR's), counts are then either allocated by nearest pixel interpolation or allocated by an overlap method and then corrected for geometric effects and attenuation and the data file updated. If the iterative image reconstruction option is selected, one implementation is to compute a grid Siddon retracing, and to perform maximum likelihood expectation maiximization (MLEM) computed by either: a) tracing parallel rays between subpixels on opposite detector heads; or b) tracing rays between randomized endpoint locations on opposite detector heads.

RMP: Reduced-set matching pursuit approach for efficient compressed sensing signal reconstruction

Directory of Open Access Journals (Sweden)

Michael M. Abdel-Sayed

2016-11-01

Full Text Available Compressed sensing enables the acquisition of sparse signals at a rate that is much lower than the Nyquist rate. Compressed sensing initially adopted ℓ1 minimization for signal reconstruction which is computationally expensive. Several greedy recovery algorithms have been recently proposed for signal reconstruction at a lower computational complexity compared to the optimal ℓ1 minimization, while maintaining a good reconstruction accuracy. In this paper, the Reduced-set Matching Pursuit (RMP greedy recovery algorithm is proposed for compressed sensing. Unlike existing approaches which either select too many or too few values per iteration, RMP aims at selecting the most sufficient number of correlation values per iteration, which improves both the reconstruction time and error. Furthermore, RMP prunes the estimated signal, and hence, excludes the incorrectly selected values. The RMP algorithm achieves a higher reconstruction accuracy at a significantly low computational complexity compared to existing greedy recovery algorithms. It is even superior to ℓ1 minimization in terms of the normalized time-error product, a new metric introduced to measure the trade-off between the reconstruction time and error. RMP superior performance is illustrated with both noiseless and noisy samples.

RMP: Reduced-set matching pursuit approach for efficient compressed sensing signal reconstruction.

Science.gov (United States)

Abdel-Sayed, Michael M; Khattab, Ahmed; Abu-Elyazeed, Mohamed F

2016-11-01

Compressed sensing enables the acquisition of sparse signals at a rate that is much lower than the Nyquist rate. Compressed sensing initially adopted [Formula: see text] minimization for signal reconstruction which is computationally expensive. Several greedy recovery algorithms have been recently proposed for signal reconstruction at a lower computational complexity compared to the optimal [Formula: see text] minimization, while maintaining a good reconstruction accuracy. In this paper, the Reduced-set Matching Pursuit (RMP) greedy recovery algorithm is proposed for compressed sensing. Unlike existing approaches which either select too many or too few values per iteration, RMP aims at selecting the most sufficient number of correlation values per iteration, which improves both the reconstruction time and error. Furthermore, RMP prunes the estimated signal, and hence, excludes the incorrectly selected values. The RMP algorithm achieves a higher reconstruction accuracy at a significantly low computational complexity compared to existing greedy recovery algorithms. It is even superior to [Formula: see text] minimization in terms of the normalized time-error product, a new metric introduced to measure the trade-off between the reconstruction time and error. RMP superior performance is illustrated with both noiseless and noisy samples.

Surface reconstruction through poisson disk sampling.

Directory of Open Access Journals (Sweden)

Wenguang Hou

Full Text Available This paper intends to generate the approximate Voronoi diagram in the geodesic metric for some unbiased samples selected from original points. The mesh model of seeds is then constructed on basis of the Voronoi diagram. Rather than constructing the Voronoi diagram for all original points, the proposed strategy is to run around the obstacle that the geodesic distances among neighboring points are sensitive to nearest neighbor definition. It is obvious that the reconstructed model is the level of detail of original points. Hence, our main motivation is to deal with the redundant scattered points. In implementation, Poisson disk sampling is taken to select seeds and helps to produce the Voronoi diagram. Adaptive reconstructions can be achieved by slightly changing the uniform strategy in selecting seeds. Behaviors of this method are investigated and accuracy evaluations are done. Experimental results show the proposed method is reliable and effective.

Air Emissions of Selected Substances from Particular Sectors Including Metallurgy in Poland

Directory of Open Access Journals (Sweden)

Kargulewicz I.

2017-03-01

Full Text Available This article presents data on the anthropogenic air emissions of selected substances (CO2, SO2, total suspended particles (TSP, dioxins and furans (PCDD/F, Pb and Cd subject to reporting under the Climate Convention (UNFCCC or the Convention on Long-range Transboundary Air Pollution (UNECE CLRTAP. It also presents the national emissions of these substances in 2014 by the major source categories and defines the share of metal production in these emissions. Analysis is based on national emission inventory reports. Most important source of air emission in case of CO2 and SO2 is 1.A.1 Energy industries category. TSP and PCDD/F are emitted mainly from fuel combustion in small sources (i.a. households. Emission of heavy metals (Pb and Cd is connected mostly with 1.A.2. Manufacturing industries and construction category. Metallurgy is significant source of emission only for lead and cadmium from among all considered substances. The shares of particular sectors in the national emissions of given pollutants are important, in view of the possible reduction measures and the determination in which industries they could bring about tangible results.

Titanium template for scaphoid reconstruction.

Science.gov (United States)

Haefeli, M; Schaefer, D J; Schumacher, R; Müller-Gerbl, M; Honigmann, P

2015-06-01

Reconstruction of a non-united scaphoid with a humpback deformity involves resection of the non-union followed by bone grafting and fixation of the fragments. Intraoperative control of the reconstruction is difficult owing to the complex three-dimensional shape of the scaphoid and the other carpal bones overlying the scaphoid on lateral radiographs. We developed a titanium template that fits exactly to the surfaces of the proximal and distal scaphoid poles to define their position relative to each other after resection of the non-union. The templates were designed on three-dimensional computed tomography reconstructions and manufactured using selective laser melting technology. Ten conserved human wrists were used to simulate the reconstruction. The achieved precision measured as the deviation of the surface of the reconstructed scaphoid from its virtual counterpart was good in five cases (maximal difference 1.5 mm), moderate in one case (maximal difference 3 mm) and inadequate in four cases (difference more than 3 mm). The main problems were attributed to the template design and can be avoided by improved pre-operative planning, as shown in a clinical case. © The Author(s) 2014.

Environmental Aspects of Social Responsibility of Public Sector Organizations

Directory of Open Access Journals (Sweden)

Liliana Hawrysz

2015-12-01

Full Text Available In addition to determining social responsibility policies that affect the market and social actors, certain governments also set objectives related to their internal activity. For example, one of the activities of the German government is to implement the concept of social responsibility into public institutions. In the Netherlands, one of the government tasks is to set an example for responsible practices (government as a role model. The aim of this paper is to examine firstly whether public sector entities set an example for responsible practices, especially with regard to respect for the environment, and secondly, whether public sector organizations in Poland significantly differ from organizations abroad in terms of their practices in the field of environmental protection. A questionnaire was a basis for data collection. The questionnaires were distributed to representatives of deliberately selected public sector organizations located primarily in Europe. The study was conducted in 2012–2013 on a group of 220 public sector organizations (102 Polish and 118 other European. The paper presents only the selected part of research. Public sector organizations in Poland do not have internal mechanisms of environmental responsibility. There is a significant discrepancy between the state of the environmental responsibility of organizations located in Poland and abroad. Obtained results show that public sector organizations, those in Poland in particular, are making their first steps in developing internal environmental responsibility.

Adaptive multiresolution method for MAP reconstruction in electron tomography

Energy Technology Data Exchange (ETDEWEB)

Acar, Erman, E-mail: erman.acar@tut.fi [Department of Signal Processing, Tampere University of Technology, P.O. Box 553, FI-33101 Tampere (Finland); BioMediTech, Tampere University of Technology, Biokatu 10, 33520 Tampere (Finland); Peltonen, Sari; Ruotsalainen, Ulla [Department of Signal Processing, Tampere University of Technology, P.O. Box 553, FI-33101 Tampere (Finland); BioMediTech, Tampere University of Technology, Biokatu 10, 33520 Tampere (Finland)

2016-11-15

3D image reconstruction with electron tomography holds problems due to the severely limited range of projection angles and low signal to noise ratio of the acquired projection images. The maximum a posteriori (MAP) reconstruction methods have been successful in compensating for the missing information and suppressing noise with their intrinsic regularization techniques. There are two major problems in MAP reconstruction methods: (1) selection of the regularization parameter that controls the balance between the data fidelity and the prior information, and (2) long computation time. One aim of this study is to provide an adaptive solution to the regularization parameter selection problem without having additional knowledge about the imaging environment and the sample. The other aim is to realize the reconstruction using sequences of resolution levels to shorten the computation time. The reconstructions were analyzed in terms of accuracy and computational efficiency using a simulated biological phantom and publically available experimental datasets of electron tomography. The numerical and visual evaluations of the experiments show that the adaptive multiresolution method can provide more accurate results than the weighted back projection (WBP), simultaneous iterative reconstruction technique (SIRT), and sequential MAP expectation maximization (sMAPEM) method. The method is superior to sMAPEM also in terms of computation time and usability since it can reconstruct 3D images significantly faster without requiring any parameter to be set by the user. - Highlights: • An adaptive multiresolution reconstruction method is introduced for electron tomography. • The method provides more accurate results than the conventional reconstruction methods. • The missing wedge and noise problems can be compensated by the method efficiently.

Reconstruction and Analysis for the DUNE 35-ton Liquid Argon Prototype

Energy Technology Data Exchange (ETDEWEB)

Wallbank, Michael James [Sheffield U.

2018-01-01

Neutrino physics is approaching the precision era, with current and future experiments aiming to perform highly accurate measurements of the parameters which govern the phenomenon of neutrino oscillations. The ultimate ambition with these results is to search for evidence of CP-violation in the lepton sector, currently hinted at in the world-leading analyses from present experiments, which may explain the dominance of matter over antimatter in the Universe. The Deep Underground Neutrino Experiment (DUNE) is a future long-baseline experiment based at Fermi National Accelerator Laboratory (FNAL), with a far detector at the Sanford Underground Research Facility (SURF) and a baseline of 1300 km. In order to make the required precision measurements, the far detector will consist of 40 kton liquid argon and an embedded time projection chamber. This promising technology is still in development and, since each detector module is around a factor 15 larger than any previous experiment employing this design, prototyping the detector and design choices is critical to the success of the experiment. The 35-ton experiment was constructed for this purpose and will be described in detail in this thesis. The outcomes of the 35-ton prototype are already influencing DUNE and, following the successes and lessons learned from the experiment, confidence can be taken forward to the next stage of the DUNE programme. The main oscillation signal at DUNE will be electron neutrino appearance from the muon neutrino beam. High-precision studies of these νe interactions requires advanced processing and event reconstruction techniques, particularly in the handling of showering particles such as electrons and photons. Novel methods developed for the purposes of shower reconstruction in liquid argon are presented with an aim to successfully develop a selection to use in a νe charged-current analysis, and a first-generation selection using the new techniques is presented.

Reconstructing weak values without weak measurements

International Nuclear Information System (INIS)

Johansen, Lars M.

2007-01-01

I propose a scheme for reconstructing the weak value of an observable without the need for weak measurements. The post-selection in weak measurements is replaced by an initial projector measurement. The observable can be measured using any form of interaction, including projective measurements. The reconstruction is effected by measuring the change in the expectation value of the observable due to the projector measurement. The weak value may take nonclassical values if the projector measurement disturbs the expectation value of the observable

Economic Efficiency of Innovative Materials for Sectors of Economy

Directory of Open Access Journals (Sweden)

Miroshnikova Tatyana

2016-01-01

Full Text Available The paper proposes an approach to the assessment of the economic efficiency of innovative anti-corrosion coatings for sectors of the national economy of the Russia on the basis of a synthesis of strategic sectoral and cost analysis. According to the authors, a comparative analysis of composite polymeric anticorrosion protecting coatings with similar products, estimating of direct and indirect economic effect and prognosis of implementation, forms a deeper understanding of the role of innovative technologies in the Russian state development of import substitution, the investment attractiveness of Russian industries in the new part technologies, applied research activities of private companies. Metal consumption sectors of the economy were chosen as an object of research, as they are characterized by the use of the following products: industrial construction and reconstruction, nuclear and thermal power, chemical, oil and gas, utilities, food processing, automotive, shipbuilding, aviation and rocket science, other industry. Basic modeling of implementation of anticorrosion protecting coatings in industrial enterprises was carried out on the basis of generating energy enterprises as one of the main end-users of anti-corrosive materials that also issue accurate statements.

Filter and slice thickness selection in SPECT image reconstruction

International Nuclear Information System (INIS)

Ivanovic, M.; Weber, D.A.; Wilson, G.A.; O'Mara, R.E.

1985-01-01

The choice of filter and slice thickness in SPECT image reconstruction as function of activity and linear and angular sampling were investigated in phantom and patient imaging studies. Reconstructed transverse and longitudinal spatial resolution of the system were measured using a line source in a water filled phantom. Phantom studies included measurements of the Data Spectrum phantom; clinical studies included tomographic procedures in 40 patients undergoing imaging of the temporomandibular joint. Slices of the phantom and patient images were evaluated for spatial of the phantom and patient images were evaluated for spatial resolution, noise, and image quality. Major findings include; spatial resolution and image quality improve with increasing linear sampling frequencies over the range of 4-8 mm/p in the phantom images, best spatial resolution and image quality in clinical images were observed at a linear sampling frequency of 6mm/p, Shepp and Logan filter gives the best spatial resolution for phantom studies at the lowest linear sampling frequency; smoothed Shepp and Logan filter provides best quality images without loss of resolution at higher frequencies and, spatial resolution and image quality improve with increased angular sampling frequency in the phantom at 40 c/p but appear to be independent of angular sampling frequency at 400 c/p

Tracking SMME research in South Africa’s priority sectors

Directory of Open Access Journals (Sweden)

Christian Rogerson

2012-05-01

Full Text Available The National Industrial Policy Framework and the Accelerated and Shared Growth Initiative for South Africa emphasize the importance of promoting select ‘priority sectors’. This paper provides a review of existing research concerning SMME development in the three priority sectors of tourism, business process outsourcing and offshoring (BPO & O and, creative industries. The paper argues for the importance of undertaking sector-differentiated research on SMME development in South Africa in order to complement other research which is focussed on sector development as a whole.

A comparison of ancestral state reconstruction methods for quantitative characters.

Science.gov (United States)

Royer-Carenzi, Manuela; Didier, Gilles

2016-09-07

Choosing an ancestral state reconstruction method among the alternatives available for quantitative characters may be puzzling. We present here a comparison of seven of them, namely the maximum likelihood, restricted maximum likelihood, generalized least squares under Brownian, Brownian-with-trend and Ornstein-Uhlenbeck models, phylogenetic independent contrasts and squared parsimony methods. A review of the relations between these methods shows that the maximum likelihood, the restricted maximum likelihood and the generalized least squares under Brownian model infer the same ancestral states and can only be distinguished by the distributions accounting for the reconstruction uncertainty which they provide. The respective accuracy of the methods is assessed over character evolution simulated under a Brownian motion with (and without) directional or stabilizing selection. We give the general form of ancestral state distributions conditioned on leaf states under the simulation models. Ancestral distributions are used first, to give a theoretical lower bound of the expected reconstruction error, and second, to develop an original evaluation scheme which is more efficient than comparing the reconstructed and the simulated states. Our simulations show that: (i) the distributions of the reconstruction uncertainty provided by the methods generally make sense (some more than others); (ii) it is essential to detect the presence of an evolutionary trend and to choose a reconstruction method accordingly; (iii) all the methods show good performances on characters under stabilizing selection; (iv) without trend or stabilizing selection, the maximum likelihood method is generally the most accurate. Copyright © 2016 Elsevier Ltd. All rights reserved.

Pediatric thermal injury: acute care and reconstruction update.

Science.gov (United States)

Armour, Alexis D; Billmire, David A

2009-07-01

The acute and reconstructive care of each pediatric burn patient presents unique challenges to the plastic surgeon and the burn care team. : The purpose of this review article is to highlight the interdependence between the acute and reconstructive needs of pediatric burn patients as it pertains to each anatomical site. Relevant principles of acute pediatric burn care and burn reconstruction are outlined, based on the authors' experience and review of the literature. The need for late reconstruction in pediatric burn survivors is significantly influenced by the acute surgical and rehabilitative treatments. With their vulnerability to airway swelling, hypothermia, pulmonary edema, and ischemia-reperfusion injury, pediatric patients with large burns require precise, life-saving treatment in the acute phase. Decision-making in pediatric burn reconstruction must take into account the patient's future growth, maturity, and often lack of suitable donor sites. Appropriately selected reconstructive techniques are essential to optimize function, appearance, and quality of life in pediatric burn survivors.

Is the public healthcare sector a more strenuous working environment than the private sector for a physician?

Science.gov (United States)

Heponiemi, Tarja; Kouvonen, Anne; Sinervo, Timo; Elovainio, Marko

2013-02-01

The present study examined the differences between physicians working in public and private health care in strenuous working environments (presence of occupational hazards, physical violence, and presenteeism) and health behaviours (alcohol consumption, body mass index, and physical activity). In addition, we examined whether gender or age moderated these potential differences. Cross-sectional survey data were compiled on 1422 female and 948 male randomly selected physicians aged 25-65 years from The Finnish Health Care Professionals Study. Logistic regression and linear regression analyses were used with adjustment for gender, age, specialisation status, working time, managerial position, and on-call duty. Occupational hazards, physical violence, and presenteeism were more commonly reported by physicians working in the public sector than by their counterparts in the private sector. Among physicians aged 50 years or younger, those who worked in the public sector consumed more alcohol than those who worked in the private sector, whereas in those aged 50 or more the reverse was true. In addition, working in the private sector was most strongly associated with lower levels of physical violence in those who were older than 50 years, and with lower levels of presenteeism among those aged 40-50 years. The present study found evidence for the public sector being a more strenuous work environment for physicians than the private sector. Our results suggest that public healthcare organisations should pay more attention to the working conditions of their employees.

3D reconstruction based on light field images

Science.gov (United States)

Zhu, Dong; Wu, Chunhong; Liu, Yunluo; Fu, Dongmei

2018-04-01

This paper proposed a method of reconstructing three-dimensional (3D) scene from two light field images capture by Lytro illium. The work was carried out by first extracting the sub-aperture images from light field images and using the scale-invariant feature transform (SIFT) for feature registration on the selected sub-aperture images. Structure from motion (SFM) algorithm is further used on the registration completed sub-aperture images to reconstruct the three-dimensional scene. 3D sparse point cloud was obtained in the end. The method shows that the 3D reconstruction can be implemented by only two light field camera captures, rather than at least a dozen times captures by traditional cameras. This can effectively solve the time-consuming, laborious issues for 3D reconstruction based on traditional digital cameras, to achieve a more rapid, convenient and accurate reconstruction.

Extended Higgs sectors in radiative neutrino models

Directory of Open Access Journals (Sweden)

Oleg Antipin

2017-05-01

Full Text Available Testable Higgs partners may be sought within the extensions of the SM Higgs sector aimed at generating neutrino masses at the loop level. We study a viability of extended Higgs sectors for two selected models of radiative neutrino masses: a one-loop mass model, providing the Higgs partner within a real triplet scalar representation, and a three-loop mass model, providing it within its two-Higgs-doublet sector. The Higgs sector in the one-loop model may remain stable and perturbative up to the Planck scale, whereas the three-loop model calls for a UV completion around 106 GeV. Additional vector-like lepton and exotic scalar fields, which are required to close one- and three-loop neutrino-mass diagrams, play a decisive role for the testability of the respective models. We constrain the parameter space of these models using LHC bounds on diboson resonances.

Reconstruction of the parameters of V0 particles

International Nuclear Information System (INIS)

Ierusalimov, A.P.

2009-01-01

The procedure of reconstruction of the parameters of V 0 particles is considered for CBM setup that is planned to build up at the FAIR complex (GSI, Germany). It was shown that the use of various kinematic cuts permits one to improve essentially the selection of V 0 particles and to increase the signal/background ratio. The use of the kinematic fit procedure gives still more considerable improvement of the accuracy of V 0 parameters. The procedure of the selection of Ξ - hyperons is also examined. The considered algorithm can be used practically without changes to reconstruct the parameters of V 0 particles and Ω - /Ξ - hyperons in MPD/NICA

Online 4-dimensional event reconstruction in the CBM experiment

Energy Technology Data Exchange (ETDEWEB)

Akishina, Valentina [Goethe-Universitaet Frankfurt, Frankfurt am Main (Germany); GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Joint Institute for Nuclear Research, Dubna (Russian Federation); Kisel, Ivan [Goethe-Universitaet Frankfurt, Frankfurt am Main (Germany); GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Frankfurt Institute for Advanced Studies, Frankfurt am Main (Germany); Collaboration: CBM-Collaboration

2015-07-01

The heavy-ion experiment CBM will focus on the measurement of rare probes at interaction rates up to 10 MHz with data flow of up to 1 TB/s. The free-running data acquisition, delivering a stream of untriggered detector data, requires full event reconstruction and selection to be performed online not only in space, but also in time. The First-Level Event Selection package consists of several modules: track finding, track fitting, short-lived particles finding, event building and event selection. For track reconstruction the Cellular Automaton (CA) method is used, which allows to reconstruct tracks with high efficiency in a time-slice and perform event building. The time-based CA track finder allows to resolve tracks from a time-slice in event-corresponding groups. The algorithm is intrinsically local and the implementation is both vectorized and parallelized between CPU cores. The CA track finder shows a strong scalability on many-core systems. The speed-up factor of 10.6 on a CPU with 10 hyper-threaded physical cores was achieved.

Time-based Reconstruction of Free-streaming Data in CBM

Science.gov (United States)

Akishina, Valentina; Kisel, Ivan; Vassiliev, Iouri; Zyzak, Maksym

2018-02-01

Traditional latency-limited trigger architectures typical for conventional experiments are inapplicable for the CBM experiment. Instead, CBM will ship and collect time-stamped data into a readout buffer in a form of a time-slice of a certain length and deliver it to a large computer farm, where online event reconstruction and selection will be performed. Grouping measurements into physical collisions must be performed in software and requires reconstruction not only in space, but also in time, the so-called 4-dimensional track reconstruction and event building. The tracks, reconstructed with 4D Cellular Automaton track finder, are combined into event-corresponding clusters according to the estimated time in the target position and the errors, obtained with the Kalman Filter method. The reconstructed events are given as inputs to the KF Particle Finder package for short-lived particle reconstruction. The results of time-based reconstruction of simulated collisions in CBM are presented and discussed in details.

Mandibular reconstruction using bone allografts

International Nuclear Information System (INIS)

Chang Joon Yim

1999-01-01

Further understanding of bone healing mechanisms, bone physiology and bone biology, transplantation immunology, and development of Tissue Banking procedures has enabled oral and maxillofacial surgeons to reconstruct even the most difficult bony defects successfully with the preserved allogeneic bone implant. Although it had been known that bone allografts were clinically effective, its application has not been widespread until the reports of Inclan (I 942), Hyatt and Butler (I 950), and Wilson (I 95 1). Tissue Banking provides the surgeon with a readily available, relatively inexpensive, and relatively safe selection of allogeneic bone for clinical use. Now autogenous bone and allogeneic bone implants present a wide variety of surgical options to surgeons, whether used separately or in combination. The surgeons are able to make judicious and fruitful choices, only with a thorough knowledge of the above-mentioned biological principles and skillful techniques. Many kinds of bone grafting techniques have been tried for reconstructing defective osseous tissues of the oral and maxillofacial region, though they have varying degrees of success. The osseous defects which require grafting include those of various size, shape, position, or amount. Unlike autogenous grafts, whose function is to provide osteogenic cells, allografts are purely passive, offering only a matrix for the inductive phase of bone healing. The condition of the recipient bed is of primary importance, because the host must produce all of the essential elements for the bone allograft to become incorporated. Depending on the processing methods of the allogeneic bone, the bone graft materials have different qualities, different healing potentials and different indications. Proper selection of grafts and surgical techniques requires an understanding of graft immunology and the mechanisms of graft healing. The surgeons should know about the biological principles to raise the clinical success rate

PROJECT OF THE TRANS-SIBERIAN RAILWAY RECONSTRUCTION AS AN OBJECT OF SOCIAL EFFICIENCY EVALUATION

Directory of Open Access Journals (Sweden)

Kibalov E. B.

2015-06-01

Full Text Available We consider the problem of social efficiency evaluation concerning the project of the Trans-Siberian Railway reconstruction. This project is to be realized in the situation of strategic (fundamental uncertainty. Existing tools are not sufficient for solving this problem (because of qualitatively different nature of the project as compared with those abroad, much higher degree of uncertainty, and the lack of estimates for a number of necessary norms. Our study aims at development of an approach that would be adequate to the problem under consideration. We developed a two-level model for investment decision-making for appraisal and selection of a variant of the large-scale project. The upper level of this model bases on the macroeconomic approach (with the use of a specialized version of the Inter-Sector Inter-Region Optimization Model; the lower level bases on the microeconomic approach. As opposed to the foreign practice, the efficiency evaluation and selection of a variant of the transport project is top-down. End-to-end taking uncertainty into account is implemented. A tool for this is the scenario approach on the upper level, and the fuzzy set theory at the lower one.

Flip-avoiding interpolating surface registration for skull reconstruction.

Science.gov (United States)

Xie, Shudong; Leow, Wee Kheng; Lee, Hanjing; Lim, Thiam Chye

2018-03-30

Skull reconstruction is an important and challenging task in craniofacial surgery planning, forensic investigation and anthropological studies. Existing methods typically reconstruct approximating surfaces that regard corresponding points on the target skull as soft constraints, thus incurring non-zero error even for non-defective parts and high overall reconstruction error. This paper proposes a novel geometric reconstruction method that non-rigidly registers an interpolating reference surface that regards corresponding target points as hard constraints, thus achieving low reconstruction error. To overcome the shortcoming of interpolating a surface, a flip-avoiding method is used to detect and exclude conflicting hard constraints that would otherwise cause surface patches to flip and self-intersect. Comprehensive test results show that our method is more accurate and robust than existing skull reconstruction methods. By incorporating symmetry constraints, it can produce more symmetric and normal results than other methods in reconstructing defective skulls with a large number of defects. It is robust against severe outliers such as radiation artifacts in computed tomography due to dental implants. In addition, test results also show that our method outperforms thin-plate spline for model resampling, which enables the active shape model to yield more accurate reconstruction results. As the reconstruction accuracy of defective parts varies with the use of different reference models, we also study the implication of reference model selection for skull reconstruction. Copyright © 2018 John Wiley & Sons, Ltd.

The Free Trade Agreement and the Mexican health sector.

Science.gov (United States)

Laurell, A C; Ortega, M E

1992-01-01

This article presents a discussion of the probable implications for the Mexican health sector of the Free Trade Agreement (FTA) between the United States, Canada, and Mexico. The authors argue that the FTA should be seen as part of neoliberal policies adopted by the Mexican government in 1983 that are based on large-scale privatization and deregulation of labor relations. In this general context the health sector, which traditionally has been dominated by public institutions, is undergoing a deep restructuring. The main trends are the decapitalization of the public sector and a selective process of privatization that tends to constitute the private health sector in a field of capital accumulation. The FTA is likely to force a change in Mexican health legislation, which includes health services in the public social security system and recognizes the right to health, and to accelerate selective privatization. The U.S. insurance industry and hospital corporations are interested in promoting these changes in order to gain access to the Mexican market, estimated at 20 to 25 million persons. This would lead to further deterioration of the public institutions, increasing inequalities in health and strengthening the private sector. The historical trend toward the integration of a National Health Service in Mexico would be interrupted in favor of formation of a dual private-public system.

Restructuring of the Bulgaria power sector - changes and risks

International Nuclear Information System (INIS)

Petrov, K.

1999-01-01

On the base of the analysis made by KEMA Consulting GmbH, Germany in 1998 - 1999 according to the project 'Aid for the development of the power authority in Bulgaria' some of the possibilities and risks for the new organization are discussed. Currently the National Electric Company is a monopolist in the electricity production sector. The government policy is aimed to efficiency improvement, creation a competition where possible, expanding of the private sector. The reconstruction is based on the model of 'the single customer'. Disadvantages are: insufficient competition, centralized planning and inappropriate risk distribution, necessity of a comprehensive regulatory control. The advantages of the method are: smooth transition to the new structures, separation of the monopole and competition functions, clear predictability of the purchases, competition of new capacities. The recommendations include urgent developing of system rules, conclusion of short-term agreements for power purchase, preparation for introduction of open access and development of the Government Agency for Power Regulation

Pelvic reconstruction with allogeneic bone graft after tumor resection

Science.gov (United States)

Wang, Wei; Bi, Wen Zhi; Yang, Jing; Han, Gang; Jia, Jin Peng

2013-01-01

OBJECTIVES : Pelvic reconstruction after tumor resection is challenging. METHODS: A retrospective study had been preformed to compare the outcomes among patients who received pelvic reconstructive surgery with allogeneic bone graft after en bloc resection of pelvic tumors and patients who received en bloc resection only. RESULTS: Patients without reconstruction had significantly lower functional scores at 3 months (10 vs. 15, P = 0.001) and 6 months after surgery (18.5 vs. 22, P = 0.0024), a shorter duration of hospitalization (16 day vs. 40 days, P 0.05). CONCLUSIONS : Pelvic reconstruction with allogeneic bone graft after surgical management of pelvic tumors is associated with satisfactory surgical and functional outcomes. Further clinical studies are required to explore how to select the best reconstruction method. Level of Evidence IV, Case Series. PMID:24453659

public-private sector wage differentials for males and females in vietnam

OpenAIRE

Nguyen Danh, Hoang Long

2002-01-01

This study examines public administration-private wage differentials and SOEs-private wage differentials for males and females. Based on data from Vietnam Living Standards Survey in 2002 (VLSS 2002), wage equations with and without selectivity correction are estimated by sector of employment for males and females. From these results, the study compares the wage structure by sector of work for males and females. Oaxaca-Blinder decomposition of the public administration-private sector wage diff...

Sector model analysis of risk on cross-jurisdictional treatment of disaster waste related to the Great East Japan Earthquake

International Nuclear Information System (INIS)

Nagashima, Miori; Itokawa, Etsuko; Ozuka, Yohei

2012-01-01

This study addressed the controversial issue of disaster waste treatment in the reconstruction efforts following the Great East Japan Earthquake. Using the Sector Model (Matsumoto 2009), we categorized a range of actions taken in relation to the cross-jurisdictional treatment into the four sectors, government, industry, academia, and private. The analysis through this Sector Model made it possible to map the entire layout of waste treatment, inclusive of less-visible industry and academia sectors. Accordingly, we have argued that differences of risk awareness are not necessarily due to sector differences but rather depend on two aspects of the disaster waste treatment; the safety levels and the nationwide treatment of waste in Japan. We further suggest that the discrepancy in the arguments on safety levels emerged as a result of scientific under-determination and cross-jurisdictional treatment from social and/or political under-determination. (author)

Institutional determinants of power sector reform in Pakistan

International Nuclear Information System (INIS)

Ullah, Kafait; Arentsen, Maarten J.; Lovett, Jon C.

2017-01-01

The electricity supply sector in Pakistan has performed poorly in recent years. Reforms were introduced in the mid-1990s to improve the sector, but progressed slowly with no significant impacts on pre-reform performance. This study uses new institutional economics as a theoretical basis to elucidate reasons for the failure of power sector reforms in Pakistan to make improvements. Interviews with 23 experts using Q-methodology generated 215 statements that were used as a Q concourse. Of these, 51 statements were selected for the Q sample and ranked by 34 respondents depending on their importance. Analysis revealed four important discourses on the determinants of power sector reform failure in Pakistan. These included weak governance structure, country and sectoral endowments, inefficient regulator and unspecified political institutions or unfriendly political contexts. The study recommends establishment of institutions that support a market based power supply sector and improvements to the contractual arrangements between stakeholders to reduce opportunistic behaviour. - Highlights: • This study utilizes New Institutional Approach to study power sector reforms in Pakistan. • Work of Douglass North and Oliver Williamson help create analytical frame. • Q methodology helps overcome data limitations. • Results reveal institutional aspects as important for poor performance of reforms. • Study suggests policy recommendations to improve institutional environment and governance of power sector in Pakistan.

Comparing observer models and feature selection methods for a task-based statistical assessment of digital breast tomsynthesis in reconstruction space

Science.gov (United States)

Park, Subok; Zhang, George Z.; Zeng, Rongping; Myers, Kyle J.

2014-03-01

A task-based assessment of image quality1 for digital breast tomosynthesis (DBT) can be done in either the projected or reconstructed data space. As the choice of observer models and feature selection methods can vary depending on the type of task and data statistics, we previously investigated the performance of two channelized- Hotelling observer models in conjunction with 2D Laguerre-Gauss (LG) and two implementations of partial least squares (PLS) channels along with that of the Hotelling observer in binary detection tasks involving DBT projections.2, 3 The difference in these observers lies in how the spatial correlation in DBT angular projections is incorporated in the observer's strategy to perform the given task. In the current work, we extend our method to the reconstructed data space of DBT. We investigate how various model observers including the aforementioned compare for performing the binary detection of a spherical signal embedded in structured breast phantoms with the use of DBT slices reconstructed via filtered back projection. We explore how well the model observers incorporate the spatial correlation between different numbers of reconstructed DBT slices while varying the number of projections. For this, relatively small and large scan angles (24° and 96°) are used for comparison. Our results indicate that 1) given a particular scan angle, the number of projections needed to achieve the best performance for each observer is similar across all observer/channel combinations, i.e., Np = 25 for scan angle 96° and Np = 13 for scan angle 24°, and 2) given these sufficient numbers of projections, the number of slices for each observer to achieve the best performance differs depending on the channel/observer types, which is more pronounced in the narrow scan angle case.

Muon reconstruction and the search for leptoquarks at LHC

CERN Document Server

Ruckert, B

2006-01-01

This diploma thesis focuses on the reconstruction of high-energetic muons. This simulation study was performed within the ATLAS experiment at the Large Hadron Collider (LHC) which is a pp-collider with a centre-of-mass energy p s = 14 TeV. The purpose of this study was to identify muons with strongly overestimated transverse momentum using Monte Carlo simulated data which has been generated using Pythia and run through a full detector simulation. These muons can lead to a faked leptoquark signal, as leptoquark-decays can include high-energetic muons. If leptoquarks exist, only a small number of such events is expected which makes the safe momentum measurement a crucial point. To achieve an optimal reconstruction, selection criteria have been developed which compare the track’s 2, the particle’s -direction and the reconstructed pT s from the different reconstruction algorithms, namely the inner detector standalone reconstruction, the muon spectrometer standalone reconstruction and a combination of both. Th...

Neural network algorithm for image reconstruction using the grid friendly projections

International Nuclear Information System (INIS)

Cierniak, R.

2011-01-01

Full text: The presented paper describes a development of original approach to the reconstruction problem using a recurrent neural network. Particularly, the 'grid-friendly' angles of performed projections are selected according to the discrete Radon transform (DRT) concept to decrease the number of projections required. The methodology of our approach is consistent with analytical reconstruction algorithms. Reconstruction problem is reformulated in our approach to optimization problem. This problem is solved in present concept using method based on the maximum likelihood methodology. The reconstruction algorithm proposed in this work is consequently adapted for more practical discrete fan beam projections. Computer simulation results show that the neural network reconstruction algorithm designed to work in this way improves obtained results and outperforms conventional methods in reconstructed image quality. (author)

A tracking algorithm for the reconstruction of the daughters of long-lived particles in LHCb

CERN Document Server

Dendek, Adam Mateusz

2018-01-01

A tracking algorithm for the reconstruction of the daughters of long-lived particles in LHCb 5 Jun 2018, 16:00 1h 30m Library, Centro San Domenico () LHC experiments Posters session Speaker Katharina Mueller (Universitaet Zuerich (CH)) Description The LHCb experiment at CERN operates a high precision and robust tracking system to reach its physics goals, including precise measurements of CP-violation phenomena in the heavy flavour quark sector and searches for New Physics beyond the Standard Model. The track reconstruction procedure is performed by a number of algorithms. One of these, PatLongLivedTracking, is optimised to reconstruct "downstream tracks", which are tracks originating from decays outside the LHCb vertex detector of long-lived particles, such as Ks or Λ0. After an overview of the LHCb tracking system, we provide a detailed description of the LHCb downstream track reconstruction algorithm. Its computational intelligence part is described in details, including the adaptation of the employed...

Attractor reconstruction for non-linear systems: a methodological note

Science.gov (United States)

Nichols, J.M.; Nichols, J.D.

2001-01-01

Attractor reconstruction is an important step in the process of making predictions for non-linear time-series and in the computation of certain invariant quantities used to characterize the dynamics of such series. The utility of computed predictions and invariant quantities is dependent on the accuracy of attractor reconstruction, which in turn is determined by the methods used in the reconstruction process. This paper suggests methods by which the delay and embedding dimension may be selected for a typical delay coordinate reconstruction. A comparison is drawn between the use of the autocorrelation function and mutual information in quantifying the delay. In addition, a false nearest neighbor (FNN) approach is used in minimizing the number of delay vectors needed. Results highlight the need for an accurate reconstruction in the computation of the Lyapunov spectrum and in prediction algorithms.

Medical and health care sector

International Nuclear Information System (INIS)

Ainul Hayati Daud; Hazmimi Kasim

2010-01-01

The medical and health care sector in general supplies products and provides services that can be categorized as diagnostic radiology, therapeutic application and nuclear medicine (both, diagnostic and/ or therapeutic). The institutions offer different categories of services. Some provide only one category of service, for example, diagnostic radiology. Others may provide more than one categories, for example, diagnostic nuclear medicine and therapeutic nuclear medicine services. A total of 90 entities comprising 65 public agencies and 34 private companies were selected in this study for this sector. The majority of the entities, 75.6 %, operate in Peninsular Malaysia. The remainders operate in Sabah and Sarawak. The findings of the study on both public agencies and private companies are presented in subsequent sections of this chapter. (author)

Apparatus and method for reconstructing data

International Nuclear Information System (INIS)

Pavkovich, J.M.

1977-01-01

The apparatus and method for reconstructing data are described. A fan beam of radiation is passed through an object, the beam lying in the same quasi-plane as the object slice to be examined. Radiation not absorbed in the object slice is recorded on oppositely situated detectors aligned with the source of radiation. Relative rotation is provided between the source-detector configuration and the object. Reconstruction means are coupled to the detector means, and may comprise a general purpose computer, a special purpose computer, and control logic for interfacing between said computers and controlling the respective functioning thereof for performing a convolution and back projection based upon non-absorbed radiation detected by said detector means, whereby the reconstruction means converts values of the non-absorbed radiation into values of absorbed radiation at each of an arbitrarily large number of points selected within the object slice. Display means are coupled to the reconstruction means for providing a visual or other display or representation of the quantities of radiation absorbed at the points considered in the object. (Auth.)

Quality of life before reconstructive breast surgery: A preoperative comparison of patients with immediate, delayed, and major revision reconstruction.

Science.gov (United States)

Rosson, Gedge D; Shridharani, Sachin M; Magarakis, Michael; Manahan, Michele A; Basdag, Basak; Gilson, Marta M; Pusic, Andrea L

2013-05-01

Women undergo breast reconstruction at different time-points in their cancer care; knowing patients' preoperative quality of life (QoL) is critical in the overall care of the patient with breast cancer. Our objective was to describe presurgical QoL among women undergoing immediate, delayed, or major revision breast reconstructive surgery at our institution. From March 2008 to February 2009, we administered preoperative BREAST-Q questionnaires to women who presented to our institution for breast reconstruction. Univariate and multivariate analyses were performed to compare patient cohorts across multiple QoL domains including body image, physical well-being, psychosocial well-being, and sexual well-being. Of the 231 patients who presented for preoperative consultation, 176 returned the questionnaire (response rate 76%; 117 from the immediate, 21 from the delayed, and 32 from the major revision reconstruction groups, plus 6 mixed or unknown). The three groups differed significantly (P < 0.05) across four of the six domains: body image (satisfaction with breasts), psychosocial well-being, sexual well-being, and physical well-being of the chest and upper body. The immediate reconstruction group had higher (better) scores than the delayed reconstruction group, which had higher (better) scores than the major revision group. These data suggest that women presenting for breast reconstruction at different stages of reconstruction have different baseline QoL. Such data may help us better understand patient selection, education, and expectations, and may lead to improved patient-surgeon communication. Copyright © 2013 Wiley Periodicals, Inc.

Photoelectron holography with improved image reconstruction

Energy Technology Data Exchange (ETDEWEB)

Matsushita, Tomohiro, E-mail: matusita@spring8.or.j [Japan Synchrotron Radiation Research Institute (JASRI), SPring-8, 1-1-1 Kouto, Sayo-cho, Sayo-gun Hyogo 679-5198 (Japan); Matsui, Fumihiko; Daimon, Hiroshi [Nara Institute of Science and Technology (NAIST), 8916-5 Takayama, Ikoma, Nara 630-0192 (Japan); Hayashi, Kouichi [Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan)

2010-05-15

Electron holography is a type of atomic structural analysis, and it has unique features such as element selectivity and the ability to analyze the structure around an impurity in a crystal. In this paper, we introduce the measurement system, electron holograms, a theory for the recording process of an electron hologram, and a theory for the reconstruction algorithm. We describe photoelectron holograms, Auger electron holograms, and the inverse mode of an electron hologram. The reconstruction algorithm, scattering pattern extraction algorithm (SPEA), the SPEA with maximum entropy method (SPEA-MEM), and SPEA-MEM with translational operation are also described.

Photoelectron holography with improved image reconstruction

International Nuclear Information System (INIS)

Matsushita, Tomohiro; Matsui, Fumihiko; Daimon, Hiroshi; Hayashi, Kouichi

2010-01-01

Electron holography is a type of atomic structural analysis, and it has unique features such as element selectivity and the ability to analyze the structure around an impurity in a crystal. In this paper, we introduce the measurement system, electron holograms, a theory for the recording process of an electron hologram, and a theory for the reconstruction algorithm. We describe photoelectron holograms, Auger electron holograms, and the inverse mode of an electron hologram. The reconstruction algorithm, scattering pattern extraction algorithm (SPEA), the SPEA with maximum entropy method (SPEA-MEM), and SPEA-MEM with translational operation are also described.

Designing on ICT reconstruction software based on DSP techniques

International Nuclear Information System (INIS)

Liu Jinhui; Xiang Xincheng

2006-01-01

The convolution back project (CBP) algorithm is used to realize the CT image's reconstruction in ICT generally, which is finished by using PC or workstation. In order to add the ability of multi-platform operation of CT reconstruction software, a CT reconstruction method based on modern digital signal processor (DSP) technique is proposed and realized in this paper. The hardware system based on TI's C6701 DSP processor is selected to support the CT software construction. The CT reconstruction software is compiled only using assembly language related to the DSP hardware. The CT software can be run on TI's C6701 EVM board by inputting the CT data, and can get the CT Images that satisfy the real demands. (authors)

Extended reviewing or the role of potential siting cantons in the ongoing Swiss site selection procedure ('Sectoral Plan')

International Nuclear Information System (INIS)

Flueeler, Thomas

2014-01-01

The disposition of nuclear waste in Switzerland has a long-standing and sinuous history reflecting its complex socio-technical nature (Flueeler, 2006). Upon the twofold failure to site a repository for low- and intermediate-level radioactive waste at Wellenberg during the 1990's and 2000's, it was recognised that the respective site selections had not been fully transparent. The Swiss government, the Federal Council, accepted the lesson and, after an extensive nationwide consultation at that, established a new site selection process 'from scratch': a systematic, stepwise, traceable, fair and binding procedure with a safety-first approach, yet extensively participatory. The so-called Sectoral Plan for Deep Geological Repositories guarantees the inclusion of the affected and concerned cantons and communities, as well as the relevant authorities in neighbouring countries from an early stage (Swiss Nuclear Energy Act, 2003; BFE, 2008). This contribution shares experience and insights in the ongoing procedure from a cantonal point of view that is an intermediate position between national needs and regional concerns, and with technical regulatory expertise between highly specialised experts and involved publics. (authors)

A Phase Current Reconstruction Approach for Three-Phase Permanent-Magnet Synchronous Motor Drive

Directory of Open Access Journals (Sweden)

Hao Yan

2016-10-01

Full Text Available Three-phase permanent-magnet synchronous motors (PMSMs are widely used in renewable energy applications such as wind power generation, tidal energy and electric vehicles owing to their merits such as high efficiency, high precision and high reliability. To reduce the cost and volume of the drive system, techniques of reconstructing three-phase current using a single current sensor have been reported for three-phase alternating current (AC control system using the power converts. In existing studies, the reconstruction precision is largely influenced by reconstructing dead zones on the Space Vector Pulse Width Modulation (SVPWM plane, which requires other algorithms to compensate either by modifying PWM modulation or by phase-shifting of the PWM signal. In this paper, a novel extended phase current reconstruction approach for PMSM drive is proposed. Six novel installation positions are obtained by analyzing the sampling results of the current paths between each two power switches. By arranging the single current sensor at these positions, the single current sensor is sampled during zero voltage vectors (ZVV without modifying the PWM signals. This proposed method can reconstruct the three-phase currents without any complex algorithms and is available in the sector boundary region and low modulation region. Finally, this method is validated by experiments.

Selection of dominant radionuclides for Phase 1 of the Hanford Environmental Dose Reconstruction Project

Energy Technology Data Exchange (ETDEWEB)

Napier, B.A.

1991-07-01

The objective of the Hanford Environmental Dose Reconstruction (HEDR) Project is to estimate the radiation dose that individuals could have received as a result of emissions from nuclear operations at Hanford since their inception in 1944. A vital step in the estimation of radiation doses is the determination of the source term,'' that is, the quantities of radionuclides that were released to the environment from the various Hanford operations. Hanford operations have at various times involved hundreds of different radionuclides, some in relatively large quantities. Those radionuclides present in the largest quantities, although significant from an operational handling point of view, may not necessarily have been those of greatest concern for offsite radiation dose. This report documents the selection of the dominant radionuclides (those that may have resulted in the largest portion of the received doses) in the source term for Phase 1 of the HEDR Project, that is, for atmospheric releases from 1944 through 1947 and for surface water releases from 1964 through 1966. 15 refs., 3 figs., 10 tabs.

Rapidly 3D Texture Reconstruction Based on Oblique Photography

Directory of Open Access Journals (Sweden)

ZHANG Chunsen

2015-07-01

Full Text Available This paper proposes a city texture fast reconstruction method based on aerial tilt image for reconstruction of three-dimensional city model. Based on the photogrammetry and computer vision theory and using the city building digital surface model obtained by prior treatment, through collinear equation calculation geometric projection of object and image space, to obtain the three-dimensional information and texture information of the structure and through certain the optimal algorithm selecting the optimal texture on the surface of the object, realize automatic extraction of the building side texture and occlusion handling of the dense building texture. The real image texture reconstruction results show that: the method to the 3D city model texture reconstruction has the characteristics of high degree of automation, vivid effect and low cost and provides a means of effective implementation for rapid and widespread real texture rapid reconstruction of city 3D model.

Private Sector in Indian Healthcare Delivery: Consumer Perspective and Government Policies to promote private Sector

Directory of Open Access Journals (Sweden)

Utkarsh Shah, Ragini Mohanty

2011-01-01

Full Text Available This research paper attempts to collate literature from various sources, in an attempt to answer three pertinent questions related to healthcare in India. Firstly, what is it meant by ‘private sector’ in healthcare delivery system of India, secondly how has the private sector evolved over the decades and what has been the role of the government in propelling the growth. Finally, the paper tries to highlight some of the factors that have promoted the growth of private sector in India with specific reference to quality of medical care. The paper explicitly indicates that the deficiencies in the public health delivery system of India, was the key to growth of private infrastructure in healthcare.The shift of hospital industry for ‘welfare orientation’ to ‘business orientation’ was marked by the advent of corporate hospitals, supported by various policy level initiatives made by the government. Today, there are over 20 international healthcare brands in India with several corporate hospitals.However, a large section of the ‘private healthcare delivery segment’ is scattered and quality of medical care continues to remain a matter of concern. This paper tracks the various government initiatives to promote private investment in healthcare and attempts to explore the reasons for preference of the private sector. Surprisingly, in contrast to contemporary belief, quality of medical care doesn’t seem to be the leading cause for preference of the private sector. Except for a few select corporate and trust hospitals, quality of medical care in private sector seems to be poor and at times compromised.

The role of the European Bank in the energy sector

International Nuclear Information System (INIS)

Coleman, J.

1993-01-01

The European Bank for Reconstruction and Development was established in 1991 to assist central and eastern European countries in making the transition from command economies to market economies. The Bank provides loans, equity investments, guarantees, advice, and technical cooperation to qualified applicants through its merchant banking and development banking operations. In the energy sector, the Bank recognizes that the energy resources of eastern Europe are enormous but so are the problems associated with their development. Since its foundation, most of the Bank's energy-related lending has been in the oil and gas sector in Russia and the Baltic countries. The Bank has approved eight projects in that sector with total capital costs of ca US$1.7 billion. Major problem areas to be overcome include uneconomic domestic pricing, high energy intensity and pollution, inadequate legal frameworks, inappropriate tax structures, and institutional complexity. Canadian firms have been actively involed in Bank-financed projects in the Russian oil and gas sector, and two such projects are briefly described. They comprise joint ventures with Russian enterprises or associations and include rehabilitation of Siberian oil fields and drilling new wells in the Komi (Arctic) region. A common feature of these projects is that they were well under way before the Bank got involved, but the Bank brings the benefits of additional financing and providing moral support and expertise which can be useful in overcoming administrative and regulatory difficulties

Sectoral and regional expansion of emissions trading

Energy Technology Data Exchange (ETDEWEB)

Boehringer, Christoph; Bouwe, Dijkstra; Rosendahl, Knut Einar

2011-07-01

We consider an international emissions trading scheme with partial sectoral and regional coverage. Sectoral and regional expansion of the trading scheme is beneficial in aggregate, but not necessarily for individual countries. We simulate international CO{sub 2} emission quota markets using marginal abatement cost functions and the Copenhagen 2020 climate policy targets for selected countries that strategically allocate emissions in a bid to manipulate the quota price. Quota exporters and importers generally have conflicting interests about admitting more countries to the trading coalition, and our results indicate that some countries may lose substantially when the coalition expands in terms of new countries. For a given coalition, expanding sectoral coverage makes most countries better off, but some countries (notably the USA and Russia) may lose out due to loss of strategic advantages. In general, exporters tend to have stronger strategic power than importers.(Author)

Merger and Acquisition in the Banking Sector

Directory of Open Access Journals (Sweden)

Anna Szewczyk

2008-12-01

Full Text Available The article presents situation on mergers and acquisitions (MA in banking sector during last twenty years. The main motives are selected and analyzed. All is explained on the base on research reports of the Deutsche Bundesbank and the European Central Bank.

Radiotherapy and breast reconstruction: a meta-analysis.

LENUS (Irish Health Repository)

Barry, M

2011-05-01

The optimum sequencing of breast reconstruction (BR) in patients receiving postmastectomy radiation therapy (PMRT) is controversial. A comprehensive search of published studies that examined postoperative morbidity following immediate or delayed BR with combined radiotherapy was performed. Medical (MEDLINE & EMBASE) databases were searched and cross-referenced for appropriate studies where morbidity following BR was the primary outcome measured. A total of 1,105 patients were identified from 11 appropriately selected studies. Patients undergoing PMRT and BR are more likely to suffer morbidity compared with patients not receiving PMRT (OR = 4.2; 95% CI, 2.4-7.2 [no PMRT vs. PMRT]). Reconstruction technique was also examined with outcome when PMRT was delivered after BR, and this demonstrated that autologous reconstruction is associated with less morbidity in this setting (OR = 0.21; 95% CI, 0.1-0.4 [autologous vs. implant-based]). Delaying BR until after PMRT had no significant effect on outcome (OR = 0.87; 95% CI, 0.47-1.62 [delayed vs. immediate]). PMRT has a detrimental effect on BR outcome. These results suggest that where immediate reconstruction is undertaken with the necessity of PMRT, an autologous flap results in less morbidity when compared with implant-based reconstruction.

Influence of patient axial malpositioning on the trueness and precision of pelvic parameters obtained from 3D reconstructions based on biplanar radiographs

Energy Technology Data Exchange (ETDEWEB)

Ghostine, Bachir; Assi, Ayman [Institut de Biomecanique Humaine Georges Charpak, Arts et Metiers ParisTech, Paris (France); University of Saint-Joseph, Laboratory of Biomechanics and Medical Imaging, Faculty of Medicine, Beirut (Lebanon); Sauret, Christophe; Skalli, Wafa [Institut de Biomecanique Humaine Georges Charpak, Arts et Metiers ParisTech, Paris (France); Bakouny, Ziad; Khalil, Nour [University of Saint-Joseph, Laboratory of Biomechanics and Medical Imaging, Faculty of Medicine, Beirut (Lebanon); Ghanem, Ismat [University of Saint-Joseph, Laboratory of Biomechanics and Medical Imaging, Faculty of Medicine, Beirut (Lebanon); University of Saint-Joseph, Hotel-Dieu de France Hospital, Beirut (Lebanon)

2017-03-15

Radiographs are often performed to assess pelvic and hip parameters, but results depend upon correct pelvis positioning. Three-dimensional (3D) reconstruction from biplanar-radiographs should provide parameters that are less sensitive to pelvic orientation, but this remained to be evaluated. Computerized-tomographic scans of six patients were used both as a reference and for generating simulated frontal and lateral radiographs. These simulated radiographs were generated while introducing axial rotations of the pelvis ranging from 0 to 20 . Simulated biplanar-radiographs were utilized by four operators, three times each, to perform pelvic 3D-reconstructions. These reconstructions were used to assess the trueness, precision and global uncertainty of radiological pelvic and hip parameters for each position. In the neutral position, global uncertainty ranged between ± 2 for pelvic tilt and ± 9 for acetabular posterior sector angle and was mainly related to precision errors (ranging from 1.5 to 7 ). With increasing axial rotation, global uncertainty increased and ranged between ± 5 for pelvic tilt and ± 11 for pelvic incidence, sacral slope and acetabular anterior sector angle, mainly due to precision errors. Radiological parameters obtained from 3D-reconstructions, based on biplanar-radiographs, are less sensitive to axial rotation compared to plain radiographs. However, the axial rotation should nonetheless not exceed 10 . (orig.)

Influence of patient axial malpositioning on the trueness and precision of pelvic parameters obtained from 3D reconstructions based on biplanar radiographs

International Nuclear Information System (INIS)

Ghostine, Bachir; Assi, Ayman; Sauret, Christophe; Skalli, Wafa; Bakouny, Ziad; Khalil, Nour; Ghanem, Ismat

2017-01-01

Radiographs are often performed to assess pelvic and hip parameters, but results depend upon correct pelvis positioning. Three-dimensional (3D) reconstruction from biplanar-radiographs should provide parameters that are less sensitive to pelvic orientation, but this remained to be evaluated. Computerized-tomographic scans of six patients were used both as a reference and for generating simulated frontal and lateral radiographs. These simulated radiographs were generated while introducing axial rotations of the pelvis ranging from 0 to 20 . Simulated biplanar-radiographs were utilized by four operators, three times each, to perform pelvic 3D-reconstructions. These reconstructions were used to assess the trueness, precision and global uncertainty of radiological pelvic and hip parameters for each position. In the neutral position, global uncertainty ranged between ± 2 for pelvic tilt and ± 9 for acetabular posterior sector angle and was mainly related to precision errors (ranging from 1.5 to 7 ). With increasing axial rotation, global uncertainty increased and ranged between ± 5 for pelvic tilt and ± 11 for pelvic incidence, sacral slope and acetabular anterior sector angle, mainly due to precision errors. Radiological parameters obtained from 3D-reconstructions, based on biplanar-radiographs, are less sensitive to axial rotation compared to plain radiographs. However, the axial rotation should nonetheless not exceed 10 . (orig.)

Technologies for climate change adaptation. Agriculture sector

Energy Technology Data Exchange (ETDEWEB)

Zhu, X [ed.; UNEP Risoe Centre, Roskilde (Denmark); Clements, R; Quezada, A; Torres, J [Practical Action Latin America, Lima (Peru); Haggar, J [Univ. of Greenwich, London (United Kingdom)

2011-08-15

This guidebook presents a selection of technologies for climate change adaptation in the agriculture sector. A set of 22 adaptation technologies are showcased. These are based primarily on the principles of agroecology, but also include scientific technologies of climate and biological sciences complemented by important sociological and institutional capacity building processes that are required for climate change to function. The technologies cover: 1) Planning for climate change and variability. 2) Sustainable water use and management. 3) Soil management. 4) Sustainable crop management. 5) Sustainable livestock management. 6) Sustainable farming systems. 7) Capacity building and stakeholder organisation. Technologies that tend to homogenise the natural environment and agricultural production have low possibilities of success in environmental stress conditions that are likely to result from climate change. On the other hand, technologies that allow for, and promote diversity are more likely to provide a strategy which strengthens agricultural production in the face of uncertain future climate change scenarios. The 22 technologies showcased in this guidebook have been selected because they facilitate the conservation and restoration of diversity while also providing opportunities for increasing agricultural productivity. Many of these technologies are not new to agricultural production practices, but they are implemented based on the assessment of current and possible future impacts of climate change in a particular location. agroecology is an approach that encompasses concepts of sustainable production and biodiversity promotion and therefore provides a useful framework for identifying and selecting appropriate adaptation technologies for the agriculture sector. The guidebook provides a systematic analysis of the most relevant information available on climate change adaptation technologies in the agriculture sector. It has been compiled based on a literature

Versatality of Nasolabial Flap in Orofacial Reconstruction

Directory of Open Access Journals (Sweden)

Nandesh Shetty

2015-01-01

Materials and Methods: A total of 10 patients were selected based on the size of surgical defect. Nasolabial flap was used to reconstruct defects of small to moderate size in the oro-facial region and post-operative follow up was done. Results: All of the patients underwent inferiorly based Transposition Island flap for reconstruction of different oro-facial defects. Few complications like bulky size of the flap, slight donor site distortion (scar formation and intra-oral hair growth were seen in six patients. Two incidences of infection in the transferred flap were seen. Conclusion: It is a safe minor procedure done under general anesthesia with good reconstructive results over small or moderately sized maxillofacial defects. Proper attention to flap design, operative technique and post - operative management are useful in reducing the incidence of complications.

Track reconstruction in the emulsion-lead target of the OPERA experiment using the ESS microscope

Science.gov (United States)

Arrabito, L.; Bozza, C.; Buontempo, S.; Consiglio, L.; Cozzi, M.; D'Ambrosio, N.; DeLellis, G.; DeSerio, M.; Di Capua, F.; Di Ferdinando, D.; Di Marco, N.; Ereditato, A.; Esposito, L. S.; Fini, R. A.; Giacomelli, G.; Giorgini, M.; Grella, G.; Ieva, M.; Janicsko Csathy, J.; Juget, F.; Kreslo, I.; Laktineh, I.; Manai, K.; Mandrioli, G.; Marotta, A.; Migliozzi, P.; Monacelli, P.; Moser, U.; Muciaccia, M. T.; Pastore, A.; Patrizii, L.; Petukhov, Y.; Pistillo, C.; Pozzato, M.; Romano, G.; Rosa, G.; Russo, A.; Savvinov, N.; Schembri, A.; Scotto Lavina, L.; Simone, S.; Sioli, M.; Sirignano, C.; Sirri, G.; Strolin, P.; Tioukov, V.; Waelchli, T.

2007-05-01

The OPERA experiment, designed to conclusively prove the existence of νμ→ντ oscillations in the atmospheric sector, makes use of a massive lead-nuclear emulsion target to observe the appearance of ντ's in the CNGS νμ beam. The location and analysis of the neutrino interactions in quasi real-time required the development of fast computer-controlled microscopes able to reconstruct particle tracks with sub-micron precision and high efficiency at a speed of ~20 cm2/h. This paper describes the performance in particle track reconstruction of the European Scanning System, a novel automatic microscope for the measurement of emulsion films developed for OPERA.

Track reconstruction in the emulsion-lead target of the OPERA experiment using the ESS microscope

International Nuclear Information System (INIS)

Arrabito, L; Bozza, C; Buontempo, S

2007-01-01

The OPERA experiment, designed to conclusively prove the existence of ν μ →ν τ oscillations in the atmospheric sector, makes use of a massive lead-nuclear emulsion target to observe the appearance of ν τ 's in the CNGS ν μ beam. The location and analysis of the neutrino interactions in quasi real-time required the development of fast computer-controlled microscopes able to reconstruct particle tracks with sub-micron precision and high efficiency at a speed of ∼20 cm 2 /h. This paper describes the performance in particle track reconstruction of the European Scanning System, a novel automatic microscope for the measurement of emulsion films developed for OPERA

Influence of the different anteromedial portal on femoral tunnel orientation during anatomic ACL reconstruction

Directory of Open Access Journals (Sweden)

Dong-Kyu Moon

2017-05-01

Conclusions: In anatomic ACL reconstruction, a mal-positioned AM portal can cause abnormal tunnel orientation, which may lead to mechanical failure during ACL reconstruction. Therefore, it is important to select accurate AM portal positioning, and possibly using an AAM portal by measuring an accurate position when drilling a femoral tunnel in anatomic ACL reconstruction.

Chiropractic practice in the Danish public health care sector

DEFF Research Database (Denmark)

Myburgh, Corrie

2009-01-01

This commentary offers preliminary considerations around a phenomenological investigation of chiropractic services in a Danish public sector setting. In this narrative description, the main venue for chiropractic public (secondary) sector practice in the Danish context is briefly described...... and defined. Furthermore, a contextually relevant definition of an integral health care service is presented; and the professional importance for chiropractic in providing such services is also discussed. Finally, salient questions requiring empirical investigation in this context are posed; and selected...

Private sector participation in power sector in India

International Nuclear Information System (INIS)

Ranganathan, V.

1992-01-01

The Indian Government is currently thinking of allowing private sector to participate in power sector inviting private sector to generate electricity mainly from coal. The main motivation is resource mobilization from private sector, since the Plan funds are diverted to rural development away from power sector; and yet the massive expansion has to be financed. The paper analyzes the inherent difficulties and contradictions in the Government's proposal, such as co-existence of high cost private power and low cost public power, the potential goal-conflicts of private and public utilities and the constraints in raising finance. It suggests a different model in order to make the privatization proposition feasible. 12 refs

HEALTH SECTOR CORRUPTION AS THE ARCHENEMY OF UNIVERSAL HEALTH CARE IN INDONESIA

OpenAIRE

Juwita, Ratna

2017-01-01

AbstractThis article argues that health sector corruption is a direct threat towards universal health care in Indonesia. Three Indonesian legal cases of health sector corruption are selected to exemplify the reality of health sector corruption and it’s detrimental effect to the realization of the right to health. This article emphasizes that corruption causes misallocation and embezzlement of the fund that hampers the State party to optimally provide universal health care for the people. This...

Reconstruction of deglacial sea surface temperature in the tropical Pacific from selective analysis of a fossil coral

Energy Technology Data Exchange (ETDEWEB)

Allison, N.; Finch, A.A.; Tudhope, A.W.; Newville, M.; Sutton, S.R.; Ellam, R.M. (St Andrews); (Edinburgh); (Scottish); (UC); (St Andrews)

2010-07-13

The Sr/Ca of coral skeletons demonstrates potential as an indicator of sea surface temperatures (SSTs). However, the glacial-interglacial SST ranges predicted from Sr/Ca of fossil corals are usually higher than from other marine proxies. We observed infilling of secondary aragonite, characterized by high Sr/Ca ratios, along intraskeletal pores of a fossil coral from Papua New Guinea that grew during the penultimate deglaciation (130 {+-} 2 ka). Selective microanalysis of unaltered areas of the fossil coral indicates that SSTs at {approx}130 ka were {le} 1 C cooler than at present in contrast with bulk measurements (combining infilled and unaltered areas) which indicate a difference of 6-7 C. The analysis of unaltered areas of fossil skeletons by microprobe techniques may offer a route to more accurate reconstruction of past SSTs.

The effects of slice thickness and reconstructive parameters on VR image quality in multi-slice CT

International Nuclear Information System (INIS)

Gao Zhenlong; Wang Qiang; Liu Caixia

2005-01-01

Objective: To explore the effects of slice thickness, reconstructive thickness and reconstructive interval on VR image quality in multi-slice CT, in order to select the best slice thickness and reconstructive parameters for the imaging. Methods: Multi-slice CT scan was applied on a rubber dinosaur model with different slice thickness. VR images were reconstructed with different reconstructive thickness and reconstructive interval. Five radiologists were invited to evaluate the quality of the images without knowing anything about the parameters. Results: The slice thickness, reconstructive thickness and reconstructive interval did have effects on VR image quality and the effective degree was different. The effective coefficients were V 1 =1413.033, V 2 =563.733, V 3 =390.533, respectively. The parameters interacted with the others (P<0.05). The smaller of those parameters, the better of the image quality. With a small slice thickness and a reconstructive slice equal to slice thickness, the image quality had no obvious difference when the reconstructive interval was 1/2, 1/3, 1/4 of the slice thickness. Conclusion: A relative small scan slice thickness, a reconstructive slice equal to slice thickness and a reconstructive interval 1/2 of the slice thickness should be selected for the best VR image quality. The image quality depends mostly on the slice thickness. (authors)

Aesthetic refinements in reconstructive microsurgery of the lower leg.

Science.gov (United States)

Rainer, Christian; Schwabegger, Anton H; Gardetto, Alexander; Schoeller, Thomas; Hussl, Heribert; Ninkovic, Milomir M

2004-02-01

Even if a surgical procedure is performed for reconstructive and functional reasons, a plastic surgeon must be responsible for the visible result of the work and for the social reintegration of the patient; therefore, the aesthetic appearance of a microsurgically reconstructed lower leg must be considered. Based on the experience of 124 free-tissue transfers to the lower leg performed in 112 patients between January 1994 and March 2001 (110 [88.7 percent] were transferred successfully), three cases are presented. Considerations concerning flap selection and technical refinements in designing and tailoring microvascular flaps to improve the quality of reconstruction, also according to the aesthetic appearance, are discussed.

Function reconstruction from noisy local averages

International Nuclear Information System (INIS)

Chen Yu; Huang Jianguo; Han Weimin

2008-01-01

A regularization method is proposed for the function reconstruction from noisy local averages in any dimension. Error bounds for the approximate solution in L 2 -norm are derived. A number of numerical examples are provided to show computational performance of the method, with the regularization parameters selected by different strategies

Reconstruction of the Proximal Humerus after Wide Resection of Tumors: Comparison of Three Reconstructive Options

International Nuclear Information System (INIS)

EL-SHERBINY, M.

2008-01-01

Purpose: Assessment of the functional results and complications of three bone reconstructive procedures after resection of primary tumors of the proximal humerus. Material and Methods: Between 2000 and 2008, 32 patients having primary malignant, aggressive benign or metastatic tumors of the proximal humerous were selected for limb sparing surgery. Preoperative evaluation included CT chest, MRI. Limb sparing surgical resection was done including intraarticular or extra articular wide resection of the tumor. Bone defect was reconstructed with fusion shoulder using free vascularized fibular graft (FFFG) in 11 patients and pedicled lateral scapular crest graft (PLSCG) in 8 patients and mobile shoulder reconstruction using proximal humerus prosthesis in 13 patients. Those patients were followed-up at regular interval to detect bone union and complications related to bone flaps or prosthesis. Functional results were assessed for every patient after one year postoperatively. Results: The median age of the patients was 21 years and the follow-up period ranged from 19 months to 92 months. Postoperative resection margins were negative in all cases. The mean length of the resected humerus was 13 cm. The mean operative time for prosthesis cases was 3.5 hours and that for FVFG was 6.5 hours and was 5 hours for PLSCG cases. The mean time of bone union proximally and distally for FVFG and PLSCG was 4.2 and 5.5 months accordingly. At 1 year follow-up, the functional results for the three reconstructive procedures were nearly the same with a mean functional score for FVFG cases was 73%, for PLSCG cases was 68% and was 71% for prosthesis cases. Hand and elbow functions were preserved in all types of reconstruction. The range of shoulder abduction and flexion was grossly limited with prosthesis cases while it showed marked improvement with fusion by FVFG and PLSCG. Complications for prosthesis cases were one case proximal migration and one case posterior sublaxation. Complications of

Global Sourcing and Firm Selection

DEFF Research Database (Denmark)

Kohler, Wilhelm; Smolka, Marcel

2014-01-01

We analyze the sourcing strategies of firms active in the Spanish manufacturing sector. We show that firms that select strategies of vertical integration and of foreign sourcing ex post tend to have been more productive, ex ante, than other firms.......We analyze the sourcing strategies of firms active in the Spanish manufacturing sector. We show that firms that select strategies of vertical integration and of foreign sourcing ex post tend to have been more productive, ex ante, than other firms....

Evaluating low pass filters on SPECT reconstructed cardiac orientation estimation

Science.gov (United States)

Dwivedi, Shekhar

2009-02-01

Low pass filters can affect the quality of clinical SPECT images by smoothing. Appropriate filter and parameter selection leads to optimum smoothing that leads to a better quantification followed by correct diagnosis and accurate interpretation by the physician. This study aims at evaluating the low pass filters on SPECT reconstruction algorithms. Criteria for evaluating the filters are estimating the SPECT reconstructed cardiac azimuth and elevation angle. Low pass filters studied are butterworth, gaussian, hamming, hanning and parzen. Experiments are conducted using three reconstruction algorithms, FBP (filtered back projection), MLEM (maximum likelihood expectation maximization) and OSEM (ordered subsets expectation maximization), on four gated cardiac patient projections (two patients with stress and rest projections). Each filter is applied with varying cutoff and order for each reconstruction algorithm (only butterworth used for MLEM and OSEM). The azimuth and elevation angles are calculated from the reconstructed volume and the variation observed in the angles with varying filter parameters is reported. Our results demonstrate that behavior of hamming, hanning and parzen filter (used with FBP) with varying cutoff is similar for all the datasets. Butterworth filter (cutoff > 0.4) behaves in a similar fashion for all the datasets using all the algorithms whereas with OSEM for a cutoff < 0.4, it fails to generate cardiac orientation due to oversmoothing, and gives an unstable response with FBP and MLEM. This study on evaluating effect of low pass filter cutoff and order on cardiac orientation using three different reconstruction algorithms provides an interesting insight into optimal selection of filter parameters.

A parametric reconstruction of the deceleration parameter

Energy Technology Data Exchange (ETDEWEB)

Al Mamon, Abdulla [Manipal University, Manipal Centre for Natural Sciences, Manipal (India); Visva-Bharati, Department of Physics, Santiniketan (India); Das, Sudipta [Visva-Bharati, Department of Physics, Santiniketan (India)

2017-07-15

The present work is based on a parametric reconstruction of the deceleration parameter q(z) in a model for the spatially flat FRW universe filled with dark energy and non-relativistic matter. In cosmology, the parametric reconstruction technique deals with an attempt to build up a model by choosing some specific evolution scenario for a cosmological parameter and then estimate the values of the parameters with the help of different observational datasets. In this paper, we have proposed a logarithmic parametrization of q(z) to probe the evolution history of the universe. Using the type Ia supernova, baryon acoustic oscillation and the cosmic microwave background datasets, the constraints on the arbitrary model parameters q{sub 0} and q{sub 1} are obtained (within 1σ and 2σ confidence limits) by χ{sup 2}-minimization technique. We have then reconstructed the deceleration parameter, the total EoS parameter ω{sub tot}, the jerk parameter and have compared the reconstructed results of q(z) with other well-known parametrizations of q(z). We have also shown that two model selection criteria (namely, the Akaike information criterion and Bayesian information criterion) provide a clear indication that our reconstructed model is well consistent with other popular models. (orig.)

Mastectomy Skin Necrosis After Breast Reconstruction: A Comparative Analysis Between Autologous Reconstruction and Implant-Based Reconstruction.

Science.gov (United States)

Sue, Gloria R; Lee, Gordon K

2018-05-01

Mastectomy skin necrosis is a significant problem after breast reconstruction. We sought to perform a comparative analysis on this complication between patients undergoing autologous breast reconstruction and patients undergoing 2-stage expander implant breast reconstruction. A retrospective review was performed on consecutive patients undergoing autologous breast reconstruction or 2-stage expander implant breast reconstruction by the senior author from 2006 through 2015. Patient demographic factors including age, body mass index, history of diabetes, history of smoking, and history of radiation to the breast were collected. Our primary outcome measure was mastectomy skin necrosis. Fisher exact test was used for statistical analysis between the 2 patient cohorts. The treatment patterns of mastectomy skin necrosis were then analyzed. We identified 204 patients who underwent autologous breast reconstruction and 293 patients who underwent 2-stage expander implant breast reconstruction. Patients undergoing autologous breast reconstruction were older, heavier, more likely to have diabetes, and more likely to have had prior radiation to the breast compared with patients undergoing implant-based reconstruction. The incidence of mastectomy skin necrosis was 30.4% of patients in the autologous group compared with only 10.6% of patients in the tissue expander group (P care in the autologous group, only 3.2% were treated with local wound care in the tissue expander group (P skin necrosis is significantly more likely to occur after autologous breast reconstruction compared with 2-stage expander implant-based breast reconstruction. Patients with autologous reconstructions are more readily treated with local wound care compared with patients with tissue expanders, who tended to require operative treatment of this complication. Patients considering breast reconstruction should be counseled appropriately regarding the differences in incidence and management of mastectomy skin

Exploring the public-private sector wage gap in European countries

OpenAIRE

Christofides, Louis N.; Michael, Maria

2013-01-01

We estimate the public-private sector pay gap for 27 European countries, using the 2008 EU SILC. The coefficients of conditional (on personal and job characteristics) public sector controls give a first impression on wage differences, while decompositions into explained and unexplained components (also accounting for selectivity) allow for a more complete analysis, which helps to identify possible causes of the gap. Regional patterns exist. Separate subsample decompositions based on age, educ...

Determination оf Optimum Constructive Parameters for Circulating-Reagent Regeneration Sector Apparatus

Directory of Open Access Journals (Sweden)

A. M. Sheiko

2008-01-01

Full Text Available On the basis of equation analysis for velocity distribution in near filter mudded zone optimal constructional parameters of sector apparatus for circulating-reagent well filter regeneration have been evaluated via angle ratio of forcing and section sectors and number of sectors. The method for determination of sector apparatus length of а selected pump that provides dissolution of mud formation in filter and near filter zone is proposed in the paper. The obtained data would promote upgrading of circulating-reagent water well regeneration technology and it permits to carry out high quality and even rehabilitation of pore space penetration along the full well filter length.

Dynamic angle selection in X-ray computed tomography

Energy Technology Data Exchange (ETDEWEB)

Dabravolski, Andrei, E-mail: andrei.dabravolski@uantwerpen.be [iMinds-Vision Lab, University of Antwerp, Universiteitsplein 1, 2610 Wilrijk (Belgium); Batenburg, Kees Joost, E-mail: joost.batenburg@uantwerpen.be [iMinds-Vision Lab, University of Antwerp, Universiteitsplein 1, 2610 Wilrijk (Belgium); Centrum Wiskunde and Informatica (CWI), Science Park 123, 1098 XG Amsterdam (Netherlands); Sijbers, Jan, E-mail: jan.sijbers@uantwerpen.be [iMinds-Vision Lab, University of Antwerp, Universiteitsplein 1, 2610 Wilrijk (Belgium)

2014-04-01

Highlights: • We propose the dynamic angle selection algorithm for CT scanning. • The approach is based on the concept of information gain over a set of solutions. • Projection angles are selected based on the already available projection data. • The approach can lead to more accurate results from fewer projections. - Abstract: In X-ray tomography, a number of radiographs (projections) are recorded from which a tomogram is then reconstructed. Conventionally, these projections are acquired equiangularly, resulting in an unbiased sampling of the Radon space. However, especially in case when only a limited number of projections can be acquired, the selection of the angles has a large impact on the quality of the reconstructed image. In this paper, a dynamic algorithm is proposed, in which new projection angles are selected by maximizing the information gain about the object, given the set of possible new angles. Experiments show that this approach can select projection angles for which the accuracy of the reconstructed image is significantly higher compared to the standard angle selections schemes.

Dynamic angle selection in X-ray computed tomography

International Nuclear Information System (INIS)

Dabravolski, Andrei; Batenburg, Kees Joost; Sijbers, Jan

2014-01-01

Highlights: • We propose the dynamic angle selection algorithm for CT scanning. • The approach is based on the concept of information gain over a set of solutions. • Projection angles are selected based on the already available projection data. • The approach can lead to more accurate results from fewer projections. - Abstract: In X-ray tomography, a number of radiographs (projections) are recorded from which a tomogram is then reconstructed. Conventionally, these projections are acquired equiangularly, resulting in an unbiased sampling of the Radon space. However, especially in case when only a limited number of projections can be acquired, the selection of the angles has a large impact on the quality of the reconstructed image. In this paper, a dynamic algorithm is proposed, in which new projection angles are selected by maximizing the information gain about the object, given the set of possible new angles. Experiments show that this approach can select projection angles for which the accuracy of the reconstructed image is significantly higher compared to the standard angle selections schemes

Use of the Anterolateral Thigh in Cranio-Orbitofacial Reconstruction

Directory of Open Access Journals (Sweden)

William J. Parkes

2011-01-01

Full Text Available Objective. To detail the clinical outcomes of a series of patients having undergone free flap reconstruction of the orbit and periorbita and highlight the anterolateral thigh (ALT as a workhorse for addressing defects in this region. Methods. A review of 47 patients who underwent free flap reconstruction for orbital or periorbital defects between September 2006 and May 2011 was performed. Data reviewed included demographics, defect characteristics, free flap used, additional reconstructive techniques employed, length of stay, complications, and follow-up. The ALT subset of the case series was the focus of the data reviewed for this paper. Selected cases were described to highlight some of the advantages of employing the ALT for cranio-orbitofacial reconstruction. Results. 51 free flaps in 47 patients were reviewed. 38 cases required orbital exenteration. The ALT was used in 33 patients. Complications included 1 hematoma, 2 wound infections, 3 CSF leaks, and 3 flap failures. Conclusions. Free tissue transfer allows for the safe and effective reconstruction of complex defects of the orbit and periorbital structures. Reconstructive choice is dependent upon the extent of soft tissue loss, midfacial bone loss, and skullbase involvement. The ALT provides a versatile option to reconstruct the many cranio-orbitofacial defects encountered.

Three Target Sectors for a European Investment Strategy

International Nuclear Information System (INIS)

Janin, Lionel; Douillard, Pierre

2014-11-01

While the president of the European Commission is getting ready to present the 'Juncker package' announced in July 2014, to revive activity in Europe through investment, what are the sectors in which these investments may be concentrated? The overall analysis of investment gaps in the euro zone has confirmed the requirement for a European macro-economic revival effort that involves investment, public or private, undertaken very quickly, even though this diagnosis varies depending on the country. The drivers of a European investment strategy are fiscal, regulatory and financial and are based on the selection of projects for the future. This third 'Note d'analyse' addresses the topic of investment potential in three key sectors: transport, energy and the digital sector, for which the amount of additional investment could reach euro 120 billion per year and thus, over three years, be higher than the forecasts in the Juncker plan. This maximalist amount mainly corresponds to the implementation of an ambitious energy-climate policy. Given current budgetary constraints, carefully selecting the desired investments, for which their social utility must be validated, is imperative: socioeconomic evaluation is the appropriate approach, particularly for taking into account the environmental externalities that now justify significant investments in the ecological transition. (authors)

Review on Suitability of Available LCIA Methodologies for Assessing Environmental Impact of the Food Sector

Directory of Open Access Journals (Sweden)

Pegah Amani

2011-12-01

Full Text Available Production, processing, distribution, and consumption of a wide variety of products in the food sector have different ranges of environmental impacts. Methodologies used in environmental impact assessment differ in which set of impact categories is covered and which models are used to assess them. In the food sector, life cycle assessment results are mostly presented without any clear distinction of the principles applied to selecting the relevant methodology. In this paper, the most relevant life cycle impact assessment methodologies are determined from the list of recommended methodologies published recently in the international reference life cycle data system (ILCD handbook. The range of the relevant impacts covered is considered as the main indicator decisive in selecting a methodology. The selection of the relevant set of impact categories is performed through an overview of more than 50 recent LCA case studies of different products in the sector. The result of the research is a short list of three LCIA methodologies recommended to be used for environmental impact assessment of products in the food sector.

Soft Tissue Coverage of the Hand and Upper Extremity: The Reconstructive Elevator.

Science.gov (United States)

Miller, Erin Anne; Friedrich, Jeffrey

2016-07-01

Soft tissue reconstruction of the upper extremity is a complex topic because every defect has multiple potential solutions. Whereas the often-cited reconstructive ladder advised selection of the simplest reconstruction of the defect, the newer concept of the reconstructive elevator allows freedom to choose a more complex reconstruction to account for specialized function and aesthetic outcome. An algorithm for assessment of the defect is presented and demonstrated in this review, using 6 case examples to highlight key concepts. Representative flaps are presented and a discussion of functional and aesthetic outcomes is undertaken to provide a framework for achieving the patient's and surgeon's goals of reconstruction. Copyright © 2016 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Renewable energy utilization and CO2 mitigation in the power sector: A case study in selected GMS countries

Directory of Open Access Journals (Sweden)

Kong Pagnarith

2011-06-01

Full Text Available Renewable energy is an alternative resource to substitute fossil fuels. Currently, the share of renewable energy inpower generation is very low. The selected Greater Mekong Sub-region (GMS, namely, Cambodia, Laos, Thailand andVietnam is a region having abundant of renewable energy resources. Though these countries have a high potential of renewableenergy utilization, they are still highly dependent on the imported fossil fuels for electricity generation. The less contributionof renewable energy in the power sector in the region is due to the high cost of technologies. Renewable energytechnology cannot compete with the conventional power plant. However, in order to promote renewable energy utilizationand reduce dependency on imported fossil fuel as well as to mitigate CO2 emissions from the power sector, this study introducesfour renewable energy technologies, namely, biomass, wind, solar PV, and geothermal power, for substitution of conventionaltechnologies. To make the renewable energy competitive to the fossil fuels, incentives in terms of carbon credit of20$/ton-ne CO2 are taken into account. Results are analyzed by using the Long-Range Energy Alternative Planning System(LEAP modeling. Results of analyses reveal that in the renewable energy (RE scenario the biomass power, wind, solarphotovoltaics, and geothermal would contribute in electricity supply for 5.47 GW in the region, accounted for 3.5% in 2030.The RE scenario with carbon credits could mitigate CO2 emissions at about 36.0 million tonne at lower system cost whencompared to the business-as-usual scenario.

Conservative mastectomies and immediate reconstruction with the use of ADMs.

Science.gov (United States)

Govshievich, Alexander; Somogyi, Ron B; Brown, Mitchell H

2015-12-01

In recent years, a novel approach to immediate breast reconstruction has been introduced with the advent of acellular dermal matrix (ADM). In the setting of conservative mastectomies where the native skin envelope is preserved, placement of ADM at the lower pole in continuity with the pectoralis major muscle (PMM) provides additional support, allowing direct-to-implant breast reconstruction. The following manuscript presents the senior author's experience with ADM-assisted reconstruction and provides a detailed description of surgical technique along with a comprehensive discussion of patient selection and potential complications. A retrospective chart review of patients undergoing direct-to-implant breast reconstruction following skin sparing or nipple sparing mastectomy with the use of ADM (AlloDerm; LifeCell Corp., Branchburg, USA) was conducted at Women's College Hospital in Toronto over a 5-year period [2008-2013]. Demographic data, previous radiation therapy and post-operative complications were recorded. A total of 72 patients representing 119 breasts were identified. Average follow-up was 16 months (range, 3-51 months). Twenty-seven complications were recorded for a complication rate of 22.7% (27/119). Complications included six cases of capsular contracture (Baker III/IV), five cases of red skin syndrome, four cases of rippling, three cases of dehiscence and two cases of seroma. Overall, direct-to-implant reconstruction was successfully completed in 97.5% of breasts (116/119). One case of infection was treated with explantation and conversion to autogenous reconstruction. Two breasts with tissue necrosis or dehiscence had the implants removed and replaced with tissue expanders. Overall reoperation rate was 9.7% (7/72 patients). ADM assisted direct-to-implant breast reconstruction has been shown to be a safe option for women who are candidates for skin sparing or nipple sparing mastectomies. Judicious patient selection, effective collaboration between the

Modelo de aprendizaje para la selección de un proyecto diseño-construcción (llave en mano en el sector público A learning model for design-build project selection in the public sector

Directory of Open Access Journals (Sweden)

Alfonso Bastias

2010-04-01

public sector has historically separated design and construction contracts. In the 1990s, the U.S. public sector began to experiment with design-build project delivery, which combines design and construction in one contract. In 1997, a decision support system was developed to provide a formal selection model for public sector design-build projects. The model supports public owners in determining which projects are appropriate for design-build delivery. This initial model was static in nature and was based on a regression analysis of 104 projects. The analysis resulted in a predictive model with five performance criteria: overall satisfaction; administrative burden; conformance to expectations; schedule variance; and budget variance. Since 1997, the number of design-build projects has increased dramatically and public sector design-build methods have evolved. The original model can be improved with new data and a new framework to provide for an adaptive model as the industry continues to evolve. This paper presents a formalized application and use of learning capabilities to supplement the original static model. This model adjusts parameters and functions using artificial intelligence as the main knowledge engine. This approach can be adapted to many applications of decision support in the design and construction industry.

Short Summary European Reports on Retail Sector, Motor Vehicle Repair and Sales Sector, Food and Beverages Sector.

Science.gov (United States)

European Centre for the Development of Vocational Training, Berlin (Germany).

This document is composed of European synthesis reports on retail trade, the agro-food sector, and the motor vehicle sales and repair sector. They are based on the most important findings of the European report and the 12 national reports for each sector. Section 1, "Retail Sector," deals in part 1 with the structure of retailing in the…

Survey of corporate social responsibility practices in Nigerian manufacturing sector

OpenAIRE

Akinyomi, Oladele John

2013-01-01

Based on stakeholders’ theory, this study examined the practice of corporate social responsibility by manufacturing companies in Nigeria. It employed survey research design to study 15 randomly selected companies in the food and beverages sector. A total of 225 questionnaires were administered to collect data. Data analysis revealed that CSR is a familiar concept in the sector as most of the companies do engage in CSR activities regularly. The major areas of focus of the CSR activities includ...

Evaluation of Principal Performance in Public and Private Sector Schools

OpenAIRE

Akhtar, Iram; Cheema, Khaliq Ur Rehman

2013-01-01

The purpose of this study is to analyze the performance in context of student learning of principals in public sector and private sector schools. For this purpose five main domains were used as variables are: 1) teaching, learning and professional growth, 2) Inter-personal and inter-professional relationship and collaboration, 3) Parent and faculty involvement in decision making, 4) Vision and values, 5) Innovation and change. The population for this study was selected randomly. The target sa...

Tunka-Rex: energy reconstruction with a single antenna station

Science.gov (United States)

Hiller, R.; Bezyazeekov, P. A.; Budnev, N. M.; Fedorov, O.; Gress, O. A.; Haungs, A.; Huege, T.; Kazarina, Y.; Kleifges, M.; Korosteleva, E. E.; Kostunin, D.; Krömer, O.; Kungel, V.; Kuzmichev, L. A.; Lubsandorzhiev, N.; Mirgazov, R. R.; Monkhoev, R.; Osipova, E. A.; Pakhorukov, A.; Pankov, L.; Prosin, V. V.; Rubtsov, G. I.; Schröder, F. G.; Wischnewski, R.; Zagorodnikov, A.

2017-03-01

The Tunka-Radio extension (Tunka-Rex) is a radio detector for air showers in Siberia. From 2012 to 2014, Tunka-Rex operated exclusively together with its host experiment, the air-Cherenkov array Tunka-133, which provided trigger, data acquisition, and an independent air-shower reconstruction. It was shown that the air-shower energy can be reconstructed by Tunka-Rex with a precision of 15% for events with signal in at least 3 antennas, using the radio amplitude at a distance of 120 m from the shower axis as an energy estimator. Using the reconstruction from the host experiment Tunka-133 for the air-shower geometry (shower core and direction), the energy estimator can in principle already be obtained with measurements from a single antenna, close to the reference distance. We present a method for event selection and energy reconstruction, requiring only one antenna, and achieving a precision of about 20%. This method increases the effective detector area and lowers thresholds for zenith angle and energy, resulting in three times more events than in the standard reconstruction.

STEP: Self-supporting tailored k-space estimation for parallel imaging reconstruction.

Science.gov (United States)

Zhou, Zechen; Wang, Jinnan; Balu, Niranjan; Li, Rui; Yuan, Chun

2016-02-01

A new subspace-based iterative reconstruction method, termed Self-supporting Tailored k-space Estimation for Parallel imaging reconstruction (STEP), is presented and evaluated in comparison to the existing autocalibrating method SPIRiT and calibrationless method SAKE. In STEP, two tailored schemes including k-space partition and basis selection are proposed to promote spatially variant signal subspace and incorporated into a self-supporting structured low rank model to enforce properties of locality, sparsity, and rank deficiency, which can be formulated into a constrained optimization problem and solved by an iterative algorithm. Simulated and in vivo datasets were used to investigate the performance of STEP in terms of overall image quality and detail structure preservation. The advantage of STEP on image quality is demonstrated by retrospectively undersampled multichannel Cartesian data with various patterns. Compared with SPIRiT and SAKE, STEP can provide more accurate reconstruction images with less residual aliasing artifacts and reduced noise amplification in simulation and in vivo experiments. In addition, STEP has the capability of combining compressed sensing with arbitrary sampling trajectory. Using k-space partition and basis selection can further improve the performance of parallel imaging reconstruction with or without calibration signals. © 2015 Wiley Periodicals, Inc.

Private Sector Investments from Small States in Emerging Markets: Can International Financial Institutions Help Handle the Risks?

Directory of Open Access Journals (Sweden)

Hilmar Þór Hilmarsson

2008-12-01

Full Text Available The private sector plays an important role in the economic reconstruction of emerging market economies, and international financial institutions (IFIs increasingly work in partnership with the private sector to increase economic growth and reduce poverty in those economies. IFIs, for example, offer: (i equity financing and/or loans for private sector projects, (ii investment guarantees against political risks (or non-commercial risks, (iii technical assistance, and (iv advisory services, etc. This article will briefly discuss the services that IFIs offer the private sector in emerging markets and cases in which these services could be useful for Icelandic companies. The institutions discussed are (i the World Bank Group, (ii the European Bank for Reconstruction and Development (EBRD, (iii the Asian Development Bank (AsDB, (iv the Inter-American Development Bank (IDB, and (v the African Development Bank (AfDB. A few Icelandic firms already have plans for relatively large projects in emerging market economies, especially in the energy sector, some of them in countries that could be classified as being risky. The ongoing economic crisis in Iceland will make project financing in emerging markets more problematic than before and therefore investments in partnership with international financial institutions could be an option that Icelandic firms will increasingly need to consider if they intend to invest abroad. However, increased private sector and IFI partnerships will not happen without government action. Iceland is a member of only two of the above-mentioned IFIs: the World Bank Group and the EBRD. The decision for Iceland to become member of the AsDB, IDB and AfDB rests solely with the government. Further government inaction in this area could become an impediment for foreign direct investment from Iceland to emerging markets and increase risks when the Icelandic private sector invests in those economies. Unnecessary risks might not only hurt

Computational acceleration for MR image reconstruction in partially parallel imaging.

Science.gov (United States)

Ye, Xiaojing; Chen, Yunmei; Huang, Feng

2011-05-01

In this paper, we present a fast numerical algorithm for solving total variation and l(1) (TVL1) based image reconstruction with application in partially parallel magnetic resonance imaging. Our algorithm uses variable splitting method to reduce computational cost. Moreover, the Barzilai-Borwein step size selection method is adopted in our algorithm for much faster convergence. Experimental results on clinical partially parallel imaging data demonstrate that the proposed algorithm requires much fewer iterations and/or less computational cost than recently developed operator splitting and Bregman operator splitting methods, which can deal with a general sensing matrix in reconstruction framework, to get similar or even better quality of reconstructed images.

THE TSUNAMI TRANSFORMATION: HOW AGENCY FOR RECONSTRUCTION AND REHABILITATION [BRR] CONVERT DISASTER INTO AN OPPORTUNITY TO SUSTAINABLY DEVELOP TSUNAMI AFFECTED REGIONS OF ACEH AND NIAS

Directory of Open Access Journals (Sweden)

A. Hadi Arifin

2008-01-01

Full Text Available Reconstruction and rehabilitation is urgently needed by Aceh, both in terms of infrastructure and its development of the economic sector. Acehnese need to face this challenge to not only reconstruct the economics of Aceh but also to reconstruct the infrastructure and to build the social life of the Acehnese people. After the tsunami, Acehnese have lost their family member and also their property. It has been three years and the reconstruction for the transformation is still going on. The primary task of transformation projects should be further intensified and the education system, infrastructure, health, social, cultural, and economic development of Acehnese need to be reconstructed. This paper tries to elaborate the political economy related to the acute problems faced by BRR and Aceh Local Government and other agencies in the region.

Transformation of the Polish Banking Sector

Directory of Open Access Journals (Sweden)

Marek Stefański

2009-07-01

European Market, i.e. to look for new revenue sources, to reduce costs and improve their loan portfolios. The comparison of selected aspects of the Polish banking sector in the most developed EU Member States shows that the differences are still too large. Therefore, it seems correct to claim that the Polish banking system is undergoing another transition. It is adjustment to the Single European Market.

First results of genetic algorithm application in ML image reconstruction in emission tomography

International Nuclear Information System (INIS)

Smolik, W.

1999-01-01

This paper concerns application of genetic algorithm in maximum likelihood image reconstruction in emission tomography. The example of genetic algorithm for image reconstruction is presented. The genetic algorithm was based on the typical genetic scheme modified due to the nature of solved problem. The convergence of algorithm was examined. The different adaption functions, selection and crossover methods were verified. The algorithm was tested on simulated SPECT data. The obtained results of image reconstruction are discussed. (author)

Impact of private sector credit on the real sector of Nigeria

Directory of Open Access Journals (Sweden)

Aliyu Mamman, Ph.D

2013-07-01

Full Text Available The real sector is a strategic component of an economy because it produces and distributes tangible goods and services required to satisfy aggregate demand in the economy. For this reason, there is the need for adequate credit flow from the banking industry to the real sector, which in the Nigerian case, the credit flow has been grossly inadequate. This study is carried out to examine the impact of credit to private sector (CPS on the real sector of Nigeria with a view to assess the significant contribution of CPS to real sector growth in Nigeria. The study used aggregate time series data from 1986 to 2010, which was drawn from central bank of Nigeria (CBN statistical bulletin and CBN annual report and statement of accounts. The data was analysed using multiple regression and based on the coefficient of determination (R square, the study reveals a 96.1% variation between the CPS and real sector growth in Nigeria. The study cocludes that there is a statistically significant impact of credit to private sector on the real sector of Nigeria. This, suggest that the performance of the real sector is greatly influence by credit to private sector. The study recommends that the federal government of Nigeria through the central bank of Nigeria (CBN should enhance the financing of the real sector as well as improve credit flow to the sector because of its strategic importance in creating and generating growth of the economy.

Eustachian tube three-dimensional reconstruction of secretory otitis media

International Nuclear Information System (INIS)

Yu Yafeng; Zhou Weirong; Bao Xueping; Li Min; Hu Zhenmin

2006-01-01

Objective: To study relationship between Eustachian tube and secretory otitis media and to explore the pathogeny of secretory otitis by three-dimensional reconstruction of Eustachian tube. Methods: Thirty cases of secretory otitis media (male 19, female 11) were selected randomly. Everyone was checked by otoscope and audiometry. Their bilateral Eustachian tubes were scanning by helix CT while making Valsalva's action. All images were passed on to work station to make three-dimensional reconstruction. Results: Four patients were found have Eustachian tube diseases, while most of patients' Eustachian tubes ventilated normally. Conclusions: Three-dimensional reconstruction of Eustachian tube can open out some pathogens of some secretory otitis medias. It will be helpful to diagnosis and therapy of secretory otitis media. (authors)

Structural change and inter-sectoral mobility in a two-sector economy

International Nuclear Information System (INIS)

Antoci, Angelo; Galeotti, Marcello; Iannucci, Gianluca; Russu, Paolo

2015-01-01

This paper studies the dynamics of a two-sector economy (with a natural resource-dependent sector and an industrial sector) characterized by free inter-sectoral labor mobility and heterogeneity of agents (workers and entrepreneurs). In such a context, we analyze the effects of the deterioration of natural resources, caused by the production activity of both sectors, on inter-sectoral movements of the labor force (structural changes), on ecological dynamics and on the revenues of workers and entrepreneurs. As in the seminal work by Matsuyama (1992), we obtain that a low productivity of labor in the resource-dependent sector can fuel the industrialization process. However, differently from Matsuyama, in our model the industrialization process may give rise to a reduction in workers’ revenues if the contribution to environmental depletion of the industrial sector, per unit of product, is higher than that of the resource-dependent one.

Determination of consumption biogenic solid fuels in the commercial sector, trade, services (tertiary sector). Final report

International Nuclear Information System (INIS)

Viehmann, Cornelia; Westerkamp, Tanja; Schwenker, Andre; Schenker, Marian; Thraen, Daniela; Lenz, Volker; Ebert, Marcel

2012-01-01

. While in the energy balance of fossil fuels for the tertiary sector is determined by residual definition, this is not possible with biogenic solid fuels, since the sum of the total energy-recycled wood (and straw) is not known. Reasons for this are that only a fraction of the fuel are sold through the official fuel trade, while at the same time a considerable variety of usable biogenic solid fuels and their sources of supply are available. For this reason, in this project, the bottom-up approach, that is the consideration of the individual selected sectors of the tertiary sector, is used for the extrapolation. The tertiary sector comprises a wide variety of different industries, but not all are suitable for using solid fuels. Therefore, first, the identification of relevant sectors for this project is necessary. In addition to the group of relevant and irrelevant industries, potentially relevant industries are reported, which despite of currently low use of solid fuels can gain important in the future. The input data of classified relevant sectors are collected in a literature review and through interviews. These are processed accordingly and entered into the part of the project to be developed extrapolation method. For a holistic view of the tertiary sector, the extrapolation method is able to include data of potentially relevant or not relevant industries. In conclusion, in this study, the extrapolation results are presented and discussed. [de

Integrated Approach to Reconstruction of Microbial Regulatory Networks

Energy Technology Data Exchange (ETDEWEB)

Rodionov, Dmitry A [Sanford-Burnham Medical Research Institute; Novichkov, Pavel S [Lawrence Berkeley National Laboratory

2013-11-04

This project had the goal(s) of development of integrated bioinformatics platform for genome-scale inference and visualization of transcriptional regulatory networks (TRNs) in bacterial genomes. The work was done in Sanford-Burnham Medical Research Institute (SBMRI, P.I. D.A. Rodionov) and Lawrence Berkeley National Laboratory (LBNL, co-P.I. P.S. Novichkov). The developed computational resources include: (1) RegPredict web-platform for TRN inference and regulon reconstruction in microbial genomes, and (2) RegPrecise database for collection, visualization and comparative analysis of transcriptional regulons reconstructed by comparative genomics. These analytical resources were selected as key components in the DOE Systems Biology KnowledgeBase (SBKB). The high-quality data accumulated in RegPrecise will provide essential datasets of reference regulons in diverse microbes to enable automatic reconstruction of draft TRNs in newly sequenced genomes. We outline our progress toward the three aims of this grant proposal, which were: Develop integrated platform for genome-scale regulon reconstruction; Infer regulatory annotations in several groups of bacteria and building of reference collections of microbial regulons; and Develop KnowledgeBase on microbial transcriptional regulation.

Failed medial patellofemoral ligament reconstruction: Causes and surgical strategies

Science.gov (United States)

Sanchis-Alfonso, Vicente; Montesinos-Berry, Erik; Ramirez-Fuentes, Cristina; Leal-Blanquet, Joan; Gelber, Pablo E; Monllau, Joan Carles

2017-01-01

Patellar instability is a common clinical problem encountered by orthopedic surgeons specializing in the knee. For patients with chronic lateral patellar instability, the standard surgical approach is to stabilize the patella through a medial patellofemoral ligament (MPFL) reconstruction. Foreseeably, an increasing number of revision surgeries of the reconstructed MPFL will be seen in upcoming years. In this paper, the causes of failed MPFL reconstruction are analyzed: (1) incorrect surgical indication or inappropriate surgical technique/patient selection; (2) a technical error; and (3) an incorrect assessment of the concomitant risk factors for instability. An understanding of the anatomy and biomechanics of the MPFL and cautiousness with the imaging techniques while favoring clinical over radiological findings and the use of common sense to determine the adequate surgical technique for each particular case, are critical to minimizing MPFL surgery failure. Additionally, our approach to dealing with failure after primary MPFL reconstruction is also presented. PMID:28251062

Reconstruction of Low Pressure Gas Supply System

Directory of Open Access Journals (Sweden)

S. N. Osipov

2013-01-01

Full Text Available The current reconstruction of residential areas in large cities especially with the developed heat-supply systems from thermal power stations and reduction of heat consumption for heating due to higher thermal resistance of building enclosing structures requires new technical solutions in respect of gas-supply problems. While making reconstruction of a gas-supply system of the modernized or new buildings in the operating zone of one gas-distribution plant it is necessary to change hot water-supply systems from gas direct-flow water heaters to centralized heat-supply and free gas volumes are to be used for other needs or gas-supply of new buildings with the current external gas distribution network.Selection of additional gas-line sections and points of gas-supply systems pertaining to new and reconstructed buildings for their connection to the current distribution system of gas-supply is to be executed in accordance with the presented methodology.

Reconstruction of neutron spectra through neural networks

International Nuclear Information System (INIS)

Vega C, H.R.; Hernandez D, V.M.; Manzanares A, E.

2003-01-01

A neural network has been used to reconstruct the neutron spectra starting from the counting rates of the detectors of the Bonner sphere spectrophotometric system. A group of 56 neutron spectra was selected to calculate the counting rates that would produce in a Bonner sphere system, with these data and the spectra it was trained the neural network. To prove the performance of the net, 12 spectra were used, 6 were taken of the group used for the training, 3 were obtained of mathematical functions and those other 3 correspond to real spectra. When comparing the original spectra of those reconstructed by the net we find that our net has a poor performance when reconstructing monoenergetic spectra, this attributes it to those characteristic of the spectra used for the training of the neural network, however for the other groups of spectra the results of the net are appropriate with the prospective ones. (Author)

Quantifying dose to the reconstructed breast: Can we adequately treat?

Energy Technology Data Exchange (ETDEWEB)

Chung, Eugene; Marsh, Robin B.; Griffith, Kent A.; Moran, Jean M. [Department of Radiation Oncology, University of Michigan, Ann Arbor, MI (United States); Pierce, Lori J., E-mail: ljpierce@umich.edu [Department of Radiation Oncology, University of Michigan, Ann Arbor, MI (United States)

2013-04-01

To evaluate how immediate reconstruction (IR) impacts postmastectomy radiotherapy (PMRT) dose distributions to the reconstructed breast (RB), internal mammary nodes (IMN), heart, and lungs using quantifiable dosimetric end points. 3D conformal plans were developed for 20 IR patients, 10 autologous reconstruction (AR), and 10 expander-implant (EI) reconstruction. For each reconstruction type, 5 right- and 5 left-sided reconstructions were selected. Two plans were created for each patient, 1 with RB coverage alone and 1 with RB + IMN coverage. Left-sided EI plans without IMN coverage had higher heart Dmean than left-sided AR plans (2.97 and 0.84 Gy, p = 0.03). Otherwise, results did not vary by reconstruction type and all remaining metrics were evaluated using a combined AR and EI dataset. RB coverage was adequate regardless of laterality or IMN coverage (Dmean 50.61 Gy, D95 45.76 Gy). When included, IMN Dmean and D95 were 49.57 and 40.96 Gy, respectively. Mean heart doses increased with left-sided treatment plans and IMN inclusion. Right-sided treatment plans and IMN inclusion increased mean lung V{sub 20}. Using standard field arrangements and 3D planning, we observed excellent coverage of the RB and IMN, regardless of laterality or reconstruction type. Our results demonstrate that adequate doses can be delivered to the RB with or without IMN coverage.

Evaluation of a 3D point cloud tetrahedral tomographic reconstruction method

Science.gov (United States)

Pereira, N. F.; Sitek, A.

2010-09-01

Tomographic reconstruction on an irregular grid may be superior to reconstruction on a regular grid. This is achieved through an appropriate choice of the image space model, the selection of an optimal set of points and the use of any available prior information during the reconstruction process. Accordingly, a number of reconstruction-related parameters must be optimized for best performance. In this work, a 3D point cloud tetrahedral mesh reconstruction method is evaluated for quantitative tasks. A linear image model is employed to obtain the reconstruction system matrix and five point generation strategies are studied. The evaluation is performed using the recovery coefficient, as well as voxel- and template-based estimates of bias and variance measures, computed over specific regions in the reconstructed image. A similar analysis is performed for regular grid reconstructions that use voxel basis functions. The maximum likelihood expectation maximization reconstruction algorithm is used. For the tetrahedral reconstructions, of the five point generation methods that are evaluated, three use image priors. For evaluation purposes, an object consisting of overlapping spheres with varying activity is simulated. The exact parallel projection data of this object are obtained analytically using a parallel projector, and multiple Poisson noise realizations of these exact data are generated and reconstructed using the different point generation strategies. The unconstrained nature of point placement in some of the irregular mesh-based reconstruction strategies has superior activity recovery for small, low-contrast image regions. The results show that, with an appropriately generated set of mesh points, the irregular grid reconstruction methods can out-perform reconstructions on a regular grid for mathematical phantoms, in terms of the performance measures evaluated.

Evaluation of a 3D point cloud tetrahedral tomographic reconstruction method

International Nuclear Information System (INIS)

Pereira, N F; Sitek, A

2010-01-01

Tomographic reconstruction on an irregular grid may be superior to reconstruction on a regular grid. This is achieved through an appropriate choice of the image space model, the selection of an optimal set of points and the use of any available prior information during the reconstruction process. Accordingly, a number of reconstruction-related parameters must be optimized for best performance. In this work, a 3D point cloud tetrahedral mesh reconstruction method is evaluated for quantitative tasks. A linear image model is employed to obtain the reconstruction system matrix and five point generation strategies are studied. The evaluation is performed using the recovery coefficient, as well as voxel- and template-based estimates of bias and variance measures, computed over specific regions in the reconstructed image. A similar analysis is performed for regular grid reconstructions that use voxel basis functions. The maximum likelihood expectation maximization reconstruction algorithm is used. For the tetrahedral reconstructions, of the five point generation methods that are evaluated, three use image priors. For evaluation purposes, an object consisting of overlapping spheres with varying activity is simulated. The exact parallel projection data of this object are obtained analytically using a parallel projector, and multiple Poisson noise realizations of these exact data are generated and reconstructed using the different point generation strategies. The unconstrained nature of point placement in some of the irregular mesh-based reconstruction strategies has superior activity recovery for small, low-contrast image regions. The results show that, with an appropriately generated set of mesh points, the irregular grid reconstruction methods can out-perform reconstructions on a regular grid for mathematical phantoms, in terms of the performance measures evaluated.

Evaluation of a 3D point cloud tetrahedral tomographic reconstruction method

Energy Technology Data Exchange (ETDEWEB)

Pereira, N F; Sitek, A, E-mail: nfp4@bwh.harvard.ed, E-mail: asitek@bwh.harvard.ed [Department of Radiology, Brigham and Women' s Hospital-Harvard Medical School Boston, MA (United States)

2010-09-21

Tomographic reconstruction on an irregular grid may be superior to reconstruction on a regular grid. This is achieved through an appropriate choice of the image space model, the selection of an optimal set of points and the use of any available prior information during the reconstruction process. Accordingly, a number of reconstruction-related parameters must be optimized for best performance. In this work, a 3D point cloud tetrahedral mesh reconstruction method is evaluated for quantitative tasks. A linear image model is employed to obtain the reconstruction system matrix and five point generation strategies are studied. The evaluation is performed using the recovery coefficient, as well as voxel- and template-based estimates of bias and variance measures, computed over specific regions in the reconstructed image. A similar analysis is performed for regular grid reconstructions that use voxel basis functions. The maximum likelihood expectation maximization reconstruction algorithm is used. For the tetrahedral reconstructions, of the five point generation methods that are evaluated, three use image priors. For evaluation purposes, an object consisting of overlapping spheres with varying activity is simulated. The exact parallel projection data of this object are obtained analytically using a parallel projector, and multiple Poisson noise realizations of these exact data are generated and reconstructed using the different point generation strategies. The unconstrained nature of point placement in some of the irregular mesh-based reconstruction strategies has superior activity recovery for small, low-contrast image regions. The results show that, with an appropriately generated set of mesh points, the irregular grid reconstruction methods can out-perform reconstructions on a regular grid for mathematical phantoms, in terms of the performance measures evaluated.

State reconstruction and irregular wavefunctions for the hydrogen atom

Science.gov (United States)

Krähmer, D. S.; Leonhardt, U.

1997-07-01

Inspired by a recently proposed procedure by Leonhardt and Raymer for wavepacket reconstruction, we calculate the irregular wavefunctions for the bound states of the Coulomb potential. We select the irregular solutions which have the simplest semiclassical limit.

Cost-effectiveness of simultaneous versus sequential surgery in head and neck reconstruction.

Science.gov (United States)

Wong, Kevin K; Enepekides, Danny J; Higgins, Kevin M

2011-02-01

To determine whether simultaneous (ablation and reconstruction overlaps by two teams) head and neck reconstruction is cost effective compared to sequentially (ablation followed by reconstruction) performed surgery. Case-controlled study. Tertiary care hospital. Oncology patients undergoing free flap reconstruction of the head and neck. A match paired comparison study was performed with a retrospective chart review examining the total time of surgery for sequential and simultaneous surgery. Nine patients were selected for both the sequential and simultaneous groups. Sequential head and neck reconstruction patients were pair matched with patients who had undergone similar oncologic ablative or reconstructive procedures performed in a simultaneous fashion. A detailed cost analysis using the microcosting method was then undertaken looking at the direct costs of the surgeons, anesthesiologist, operating room, and nursing. On average, simultaneous surgery required 3 hours 15 minutes less operating time, leading to a cost savings of approximately $1200/case when compared to sequential surgery. This represents approximately a 15% reduction in the cost of the entire operation. Simultaneous head and neck reconstruction is more cost effective when compared to sequential surgery.

Active numerical model of human body for reconstruction of falls from height.

Science.gov (United States)

Milanowicz, Marcin; Kędzior, Krzysztof

2017-01-01

Falls from height constitute the largest group of incidents out of approximately 90,000 occupational accidents occurring each year in Poland. Reconstruction of the exact course of a fall from height is generally difficult due to lack of sufficient information from the accident scene. This usually results in several contradictory versions of an incident and impedes, for example, determination of the liability in a judicial process. In similar situations, in many areas of human activity, researchers apply numerical simulation. They use it to model physical phenomena to reconstruct their real course over time; e.g. numerical human body models are frequently used for investigation and reconstruction of road accidents. However, they are validated in terms of specific road traffic accidents and are considerably limited when applied to the reconstruction of other types of accidents. The objective of the study was to develop an active numerical human body model to be used for reconstruction of accidents associated with falling from height. Development of the model involved extension and adaptation of the existing Pedestrian human body model (available in the MADYMO package database) for the purposes of reconstruction of falls from height by taking into account the human reaction to the loss of balance. The model was developed by using the results of experimental tests of the initial phase of the fall from height. The active numerical human body model covering 28 sets of initial conditions related to various human reactions to the loss of balance was developed. The application of the model was illustrated by using it to reconstruct a real fall from height. From among the 28 sets of initial conditions, those whose application made it possible to reconstruct the most probable version of the incident was selected. The selection was based on comparison of the results of the reconstruction with information contained in the accident report. Results in the form of estimated

Harmonisation efforts in the field of accounting of public sector

Directory of Open Access Journals (Sweden)

Milena Otavová

2011-01-01

Full Text Available Increasing requirements for financial reporting of public sector led to a need to create a system that would provide relevant and reliable information for management of accounting entities of public sector and also to increase the quality of accounting and financial statements of public institutions. The International Public Sector Accounting Standards Board (IPSASB is therefore creating high-quality financial reporting standards for public sector (IPSAS. Paper points out the ongoing reform of accounting in the field of public finances in the Czech Republic, where there are substantial changes in accounting rules and it also introduces new accounting methods. Regarding the fact that accounting of public sector is nowadays accounting system perhaps with the greatest potential of development, paper highlights the differences in financial reporting in accordance with Czech legislation and IPSAS system. It tries to catch the essential differences that arise from the financial legislation, the accounting basis and also from the content of financial statements. The paper also indicates the difference between Czech Accounting Standards for selected accounting entities that maintain accounts in accordance with Decree No. 410/2009 Coll. and International Public Sector Accounting Standards (IPSAS. There is also recommended approach to the creation of national standards with regard to international harmonization.

Cost-effectiveness of Training Programmes in Insurance Sector of India

Directory of Open Access Journals (Sweden)

Surbhi JAIN

2015-09-01

Full Text Available In the present era of globalization, trough competition and advancement of information technology, the paradigm for success has shifted towards intellectual assets. New ways of commerce and management structures are required to effectively exploit intellectual assets foremost to an improved approach on the development of human capital. Training requires substantial allocation of monetary, human and time resources. A systematic evaluation of training programs is the call of the time. The insurance sector has been playing a vital role in the process of economic advancement since independence in India. The objective of the present study is to identify the cost-effectiveness of training programs in the insurance sector in India. A sample of four companies has been randomly selected. This study is descriptive in nature. Secondary data has been analysed. Effectiveness-cost ratios were calculated and inferences have been drawn accordingly. Finding suggests that training programs in public insurance sector is more cost-effective as compared to private insurance sector in India.

The breaking of flavor democracy in the quark sector

Science.gov (United States)

Fritzsch, Harald; Xing, Zhi-Zhong; Zhang, Di

2017-09-01

The democracy of quark flavors is a well-motivated flavor symmetry, but it must be properly broken in order to explain the observed quark mass spectrum and flavor mixing pattern. We reconstruct the texture of flavor democracy breaking and evaluate its strength in a novel way, by assuming a parallelism between the Q=+2/3 and Q=-1/3 quark sectors and using a nontrivial parametrization of the flavor mixing matrix. Some phenomenological implications of such democratic quark mass matrices, including their variations in the hierarchy basis and their evolution from the electroweak scale to a super-high energy scale, are also discussed. Supported by National Natural Science Foundation of China (11375207) and National Basic Research Program of China (2013CB834300)

Mastectomy skin necrosis after microsurgical breast reconstruction.

Science.gov (United States)

Vargas, Christina R; Koolen, Pieter G; Anderson, Katarina E; Paul, Marek A; Tobias, Adam M; Lin, Samuel J; Lee, Bernard T

2015-10-01

Mastectomy skin necrosis represents a significant clinical morbidity after immediate breast reconstruction. In addition to aesthetic deformity, necrosis of the native mastectomy skin may require debridement, additional reconstruction, or prolonged wound care and potentially delay oncologic treatment. This study aims to evaluate patient and procedural characteristics to identify predictors of mastectomy skin necrosis after microsurgical breast reconstruction. A retrospective review was performed of all immediate microsurgical breast reconstructions performed at a single academic center. Patient records were queried for age, diabetes, active smoking, previous breast surgery, preoperative radiation, preoperative chemotherapy, body mass index, mastectomy type, mastectomy weight, flap type, autologous flap type, and postoperative mastectomy skin flap necrosis. There were 746 immediate autologous microsurgical flaps performed by three plastic surgeons at our institution during the study period. The incidence of mastectomy skin flap necrosis was 13.4%. Univariate analysis revealed a significantly higher incidence of mastectomy skin necrosis in patients with higher mastectomy weight (P mastectomy type. Multivariate analysis demonstrated statistically significant associations between mastectomy skin necrosis and both increasing mastectomy weight (odds ratio 1.348 per quartile increase, P = 0.009) and diabetes (odds ratio 2.356, P = 0.011). Increasing mastectomy weight and coexisting diabetes are significantly associated with postoperative mastectomy skin necrosis after microsurgical reconstruction. These characteristics should be considered during patient counseling, procedure selection, operative planning, and intraoperative tissue viability assessment. Copyright © 2015 Elsevier Inc. All rights reserved.

Algebraic reconstruction techniques for spectral reconstruction in diffuse optical tomography

International Nuclear Information System (INIS)

Brendel, Bernhard; Ziegler, Ronny; Nielsen, Tim

2008-01-01

Reconstruction in diffuse optical tomography (DOT) necessitates solving the diffusion equation, which is nonlinear with respect to the parameters that have to be reconstructed. Currently applied solving methods are based on the linearization of the equation. For spectral three-dimensional reconstruction, the emerging equation system is too large for direct inversion, but the application of iterative methods is feasible. Computational effort and speed of convergence of these iterative methods are crucial since they determine the computation time of the reconstruction. In this paper, the iterative methods algebraic reconstruction technique (ART) and conjugated gradients (CGs) as well as a new modified ART method are investigated for spectral DOT reconstruction. The aim of the modified ART scheme is to speed up the convergence by considering the specific conditions of spectral reconstruction. As a result, it converges much faster to favorable results than conventional ART and CG methods

Preoperative implant selection for unilateral breast reconstruction using 3D imaging with the Microsoft Kinect sensor.

Science.gov (United States)

Pöhlmann, Stefanie T L; Harkness, Elaine; Taylor, Christopher J; Gandhi, Ashu; Astley, Susan M

2017-08-01

This study aimed to investigate whether breast volume measured preoperatively using a Kinect 3D sensor could be used to determine the most appropriate implant size for reconstruction. Ten patients underwent 3D imaging before and after unilateral implant-based reconstruction. Imaging used seven configurations, varying patient pose and Kinect location, which were compared regarding suitability for volume measurement. Four methods of defining the breast boundary for automated volume calculation were compared, and repeatability assessed over five repetitions. The most repeatable breast boundary annotation used an ellipse to track the inframammary fold and a plane describing the chest wall (coefficient of repeatability: 70 ml). The most reproducible imaging position comparing pre- and postoperative volume measurement of the healthy breast was achieved for the sitting patient with elevated arms and Kinect centrally positioned (coefficient of repeatability: 141 ml). Optimal implant volume was calculated by correcting used implant volume by the observed postoperative asymmetry. It was possible to predict implant size using a linear model derived from preoperative volume measurement of the healthy breast (coefficient of determination R 2  = 0.78, standard error of prediction 120 ml). Mastectomy specimen weight and experienced surgeons' choice showed similar predictive ability (both: R 2  = 0.74, standard error: 141/142 ml). A leave one-out validation showed that in 61% of cases, 3D imaging could predict implant volume to within 10%; however for 17% of cases it was >30%. This technology has the potential to facilitate reconstruction surgery planning and implant procurement to maximise symmetry after unilateral reconstruction. Copyright © 2017 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Defining the Role of Free Flaps in Partial Breast Reconstruction.

Science.gov (United States)

Smith, Mark L; Molina, Bianca J; Dayan, Erez; Jablonka, Eric M; Okwali, Michelle; Kim, Julie N; Dayan, Joseph H

2018-03-01

 Free flaps have a well-established role in breast reconstruction after mastectomy; however, their role in partial breast reconstruction remains poorly defined. We reviewed our experience with partial breast reconstruction to better understand indications for free tissue transfer.  A retrospective review was performed of all patients undergoing partial breast reconstruction at our center between February 2009 and October 2015. We evaluated the characteristics of patients who underwent volume displacement procedures versus volume replacement procedures and free versus pedicled flap reconstruction.  There were 78 partial breast reconstructions, with 52 reductions/tissue rearrangements (displacement group) and 26 flaps (replacement group). Bra cup size and body mass index (BMI) were significantly smaller in the replacement group. Fifteen pedicled and 11 free flaps were performed. Most pedicled flaps (80.0%) were used for lateral or upper pole defects. Most free flaps (72.7%) were used for medial and inferior defects or when there was inadequate donor tissue for a pedicled flap. Complications included hematoma, cellulitis, and one aborted pedicled flap.  Free and pedicled flaps are useful for partial breast reconstruction, particularly in breast cancer patients with small breasts undergoing breast-conserving treatment (BCT). Flap selection depends on defect size, location, and donor tissue availability. Medial defects are difficult to reconstruct using pedicled flaps due to arc of rotation and intervening breast tissue. Free tissue transfer can overcome these obstacles. Confirming negative margins before flap reconstruction ensures harvest of adequate volume and avoids later re-operation. Judicious use of free flaps for oncoplastic reconstruction expands the possibility for breast conservation. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Private sector involvement in the US program of technical assistance to IAEA safeguards

International Nuclear Information System (INIS)

Pepper, S.E.; Epel, L.; Maise, G.; Reisman, A.; Skalyo, J.

1995-01-01

The US Program of Technical Assistance to IAEA Safeguards (POTAS) relies on technical expertise found in the U. S private and public sectors. Since 1993, the international Safeguards Project Office (ISPO) has sought to increase the role of the private sector in POTAS. ISPO maintains and continues to develop a database of US companies interested in providing technical expertise to the IAEA. This database is used by ISPO to find appropriate contractors to respond to IAEA requests for technical assistance when the assistance can be provided by the private sector. The private sector is currently providing support in the development of equipment, training, and procedure preparation. POTAS also supports the work of private consultants. This paper discusses ISPO's efforts to identify suitable vendors and discusses conditions that hinder more substantial involvement by the private sector. In addition, the paper will discuss selected projects that are currently in progress and identify common problems that impede the progress and success of tasks performed by the private sector

Energy savings from housing: Ineffective renovation subsidies vs efficient demolition and reconstruction incentives

International Nuclear Information System (INIS)

Dubois, Maarten; Allacker, Karen

2015-01-01

Energy savings in the housing sector are key to reduce global greenhouse gas emissions. Policies to incentivize energy savings are however disparate between countries. Taking into account environmental aspects and consumer surplus, the paper uses a stylized economic model to assess the effectiveness and efficiency of three economic instruments: subsidies for renovation, subsidies for demolition and reconstruction projects and subsidies for building new houses on virgin land. The assessment also relates to differentiated value added taxes and other financial incentives such as green loans. In a counter-intuitive way, the model highlights that subsidies for renovations with minor energy gains worsen the overall energy consumption of housing due to the inducement of lock-ins with energy inefficient houses. Structural changes are needed in the use of policy instruments. First, commonly applied support schemes for renovations with minor energy savings should be abolished. Second, scarce public resources should incentivize deep renovation and demolition and reconstruction. Finally, taxes should apply on the use of virgin land to persuade households with a high willingness to pay for a new house, to invest in demolition and reconstruction. - Highlights: • Renovation subsidies worsen overall energy consumption of housing. • Renovation induces a lock-in with energy inefficient houses. • Renovation subsidies should be abolished or structurally reformed. • Policy should incentivize demolition and reconstruction projects. • Building on virgin land should be taxed.

Comprehensive approach to functional palatomaxillary reconstruction using regional and free tissue transfer: Report of reconstructive and prosthodontic outcomes of 140 patients.

Science.gov (United States)

Urken, Mark L; Roche, Ansley M; Kiplagat, Kimberly J; Dewey, Eliza H; Lazarus, Cathy; Likhterov, Ilya; Buchbinder, Daniel; Okay, Devin J

2018-03-14

Palatomaxillary defects were historically restored with a prosthetic obturator; however, advances in local and free tissue transfer has provided a viable alternative for appropriately selected patients with palatomaxillary defects. A retrospective chart review of patients who underwent palatomaxillary reconstruction by the lead author between 1998 and 2016 was conducted. Patients who were restored with a palatal obturator were excluded. One hundred forty patients were reconstructed with a total of 159 local, regional, and free flaps with a 96.7% success rate. Seventy-four patients (52.8%) underwent prosthodontic rehabilitation, with 183 implants placed and an 86% success rate. Palatomaxillary reconstruction applying a systematic approach, using a multitude of techniques, is a safe and effective way to restore patients without compromising the ability to maintain surveillance. Prosthodontic rehabilitation can be achieved in a high percentage of patients using dental implants, leading to optimal aesthetic and functional results. © 2018 Wiley Periodicals, Inc.

Technique of calculating specific capital investments in the fuel extracting sectors of industry

Energy Technology Data Exchange (ETDEWEB)

Bugrov, V.A.; Filey, I.A.

1980-01-01

An analysis is made of the existing methods of calculating specific capital investments in the fuel extracting sectors of industry. Their shortcomings are shown. It is suggested that specific capital investments for extraction of coal and gas be defined as the ratio of capital investments to the conditional increase in extraction. Coal extraction should take int consideration all the capital investments associated with the input of new facilities, and the maintenance of the attained level of extraction and reconstruction of the enterprise, as well as all the newly introduced facilities both at the new and at the active enterprises associated with an increase in coal extraction and with maintenance of the facilities. The suggested technique completely corresponds to the ''Standard Technique for Developing a Technical-Industrial-Financial Plan,'' which stipulates determination of specific capital investments per unit of introduced facilities with only the difference that it takes into consideration the specific features of the fuel extracting sectors of industry.

From Public to Private Sector: Motives and Explanations for Sector Switching

DEFF Research Database (Denmark)

Hansen, Jesper Rosenberg

2014-01-01

Sector switching is interesting in relation to understanding how to get and keep people working in the public sector as well as to understand public and private differences. This paper focuses on why public employees leave public organizations to work in the private sector. We use a design studying...... higher educated Danish employees who recently worked in the state, comparing those who shift job to another public organization with those who switch to the private sector. We focus on different motives for job shifts which may influence sector switching such as salary, job security, organizational...... characteristics and public service motivation....

Second sector cool down

CERN Multimedia

2007-01-01

At the beginning of July, cool-down is starting in the second LHC sector, sector 4-5. The cool down of sector 4-5 may occasionally generate mist at Point 4, like that produced last January (photo) during the cool-down of sector 7-8.Things are getting colder in the LHC. Sector 7-8 has been kept at 1.9 K for three weeks with excellent stability (see Bulletin No. 16-17 of 16 April 2007). The electrical tests in this sector have got opt to a successful start. At the beginning of July the cryogenic teams started to cool a second sector, sector 4-5. At Point 4 in Echenevex, where one of the LHC’s cryogenic plants is located, preparations for the first phase of the cool-down are underway. During this phase, the sector will first be cooled to 80 K (-193°C), the temperature of liquid nitrogen. As for the first sector, 1200 tonnes of liquid nitrogen will be used for the cool-down. In fact, the nitrogen circulates only at the surface in the ...

Geometric reconstruction methods for electron tomography

Energy Technology Data Exchange (ETDEWEB)

Alpers, Andreas, E-mail: alpers@ma.tum.de [Zentrum Mathematik, Technische Universität München, D-85747 Garching bei München (Germany); Gardner, Richard J., E-mail: Richard.Gardner@wwu.edu [Department of Mathematics, Western Washington University, Bellingham, WA 98225-9063 (United States); König, Stefan, E-mail: koenig@ma.tum.de [Zentrum Mathematik, Technische Universität München, D-85747 Garching bei München (Germany); Pennington, Robert S., E-mail: robert.pennington@uni-ulm.de [Center for Electron Nanoscopy, Technical University of Denmark, DK-2800 Kongens Lyngby (Denmark); Boothroyd, Chris B., E-mail: ChrisBoothroyd@cantab.net [Ernst Ruska-Centre for Microscopy and Spectroscopy with Electrons and Peter Grünberg Institute, Forschungszentrum Jülich, D-52425 Jülich (Germany); Houben, Lothar, E-mail: l.houben@fz-juelich.de [Ernst Ruska-Centre for Microscopy and Spectroscopy with Electrons and Peter Grünberg Institute, Forschungszentrum Jülich, D-52425 Jülich (Germany); Dunin-Borkowski, Rafal E., E-mail: rdb@fz-juelich.de [Ernst Ruska-Centre for Microscopy and Spectroscopy with Electrons and Peter Grünberg Institute, Forschungszentrum Jülich, D-52425 Jülich (Germany); Joost Batenburg, Kees, E-mail: Joost.Batenburg@cwi.nl [Centrum Wiskunde and Informatica, NL-1098XG, Amsterdam, The Netherlands and Vision Lab, Department of Physics, University of Antwerp, B-2610 Wilrijk (Belgium)

2013-05-15

Electron tomography is becoming an increasingly important tool in materials science for studying the three-dimensional morphologies and chemical compositions of nanostructures. The image quality obtained by many current algorithms is seriously affected by the problems of missing wedge artefacts and non-linear projection intensities due to diffraction effects. The former refers to the fact that data cannot be acquired over the full 180° tilt range; the latter implies that for some orientations, crystalline structures can show strong contrast changes. To overcome these problems we introduce and discuss several algorithms from the mathematical fields of geometric and discrete tomography. The algorithms incorporate geometric prior knowledge (mainly convexity and homogeneity), which also in principle considerably reduces the number of tilt angles required. Results are discussed for the reconstruction of an InAs nanowire. - Highlights: ► Four algorithms for electron tomography are introduced that utilize prior knowledge. ► Objects are assumed to be homogeneous; convexity and regularity is also discussed. ► We are able to reconstruct slices of a nanowire from as few as four projections. ► Algorithms should be selected based on the specific reconstruction task at hand.

Geometric reconstruction methods for electron tomography

International Nuclear Information System (INIS)

Alpers, Andreas; Gardner, Richard J.; König, Stefan; Pennington, Robert S.; Boothroyd, Chris B.; Houben, Lothar; Dunin-Borkowski, Rafal E.; Joost Batenburg, Kees

2013-01-01

Electron tomography is becoming an increasingly important tool in materials science for studying the three-dimensional morphologies and chemical compositions of nanostructures. The image quality obtained by many current algorithms is seriously affected by the problems of missing wedge artefacts and non-linear projection intensities due to diffraction effects. The former refers to the fact that data cannot be acquired over the full 180° tilt range; the latter implies that for some orientations, crystalline structures can show strong contrast changes. To overcome these problems we introduce and discuss several algorithms from the mathematical fields of geometric and discrete tomography. The algorithms incorporate geometric prior knowledge (mainly convexity and homogeneity), which also in principle considerably reduces the number of tilt angles required. Results are discussed for the reconstruction of an InAs nanowire. - Highlights: ► Four algorithms for electron tomography are introduced that utilize prior knowledge. ► Objects are assumed to be homogeneous; convexity and regularity is also discussed. ► We are able to reconstruct slices of a nanowire from as few as four projections. ► Algorithms should be selected based on the specific reconstruction task at hand

Organisational ecology in the Danish restaurant sector

DEFF Research Database (Denmark)

Hjalager, Anne Mette

2000-01-01

The article demonstrates the high rates of organisational turmoil in the restaurant sector. The intensity of natural selection depends mainly on the age and size of the enterprise. Affiliation with other enterprises increases the chances of survival, but only if there is a substantial number...... of units co-operating in a group. Surprisingly, the level of staff competence and managerial capacity - measured in quantitative terms - cannot explain the level of success or failure in the restaurant business to any significant degree. Organisational ecology, which constitutes the theoretical...... and methodological base of this article, is a promising research approach to tourism issues. The article, which focuses on explanations for the occurrence of life events in the restaurant sector, calls for more careful policy considerations than are often the case. In particular, human-resource- and labour...

Enhanced capital-asset pricing model for the reconstruction of bipartite financial networks

Science.gov (United States)

Squartini, Tiziano; Almog, Assaf; Caldarelli, Guido; van Lelyveld, Iman; Garlaschelli, Diego; Cimini, Giulio

2017-09-01

Reconstructing patterns of interconnections from partial information is one of the most important issues in the statistical physics of complex networks. A paramount example is provided by financial networks. In fact, the spreading and amplification of financial distress in capital markets are strongly affected by the interconnections among financial institutions. Yet, while the aggregate balance sheets of institutions are publicly disclosed, information on single positions is mostly confidential and, as such, unavailable. Standard approaches to reconstruct the network of financial interconnection produce unrealistically dense topologies, leading to a biased estimation of systemic risk. Moreover, reconstruction techniques are generally designed for monopartite networks of bilateral exposures between financial institutions, thus failing in reproducing bipartite networks of security holdings (e.g., investment portfolios). Here we propose a reconstruction method based on constrained entropy maximization, tailored for bipartite financial networks. Such a procedure enhances the traditional capital-asset pricing model (CAPM) and allows us to reproduce the correct topology of the network. We test this enhanced CAPM (ECAPM) method on a dataset, collected by the European Central Bank, of detailed security holdings of European institutional sectors over a period of six years (2009-2015). Our approach outperforms the traditional CAPM and the recently proposed maximum-entropy CAPM both in reproducing the network topology and in estimating systemic risk due to fire sales spillovers. In general, ECAPM can be applied to the whole class of weighted bipartite networks described by the fitness model.

The transport sectors potential contribution to the flexibility in the power sector required by large-scale wind power integration

DEFF Research Database (Denmark)

Nørgård, Per Bromand; Lund, H.; Mathiesen, B.V.

2007-01-01

-scale integration of renewable energy in the power system – in specific wind power. In the plan, 20 % of the road transport is based on electricity and 20 % on bio- fuels. This, together with other initiatives allows for up to 55-60 % wind power penetration in the power system. A fleet of 0.5 mio electrical...... vehicles in Denmark in 2030 connected to the grid 50 % of the time represents an aggregated flexible power capacity of 1- 1.5 GW and an energy capacity of 10-150 GWh.......In 2006, the Danish Society of Engineers developed a visionary plan for the Danish energy system in 2030. The paper presents and qualifies selected part of the analyses, illustrating the transport sectors potential to contribute to the flexibility in the power sector, necessary for large...

Third sector primary health care in New Zealand.

Science.gov (United States)

Crampton, P; Dowell, A C; Bowers, S

2000-03-24

To describe key organisational characteristics of selected third sector (non-profit and non-government) primary health care organisations. Data were collected, in 1997 and 1998, from 15 third sector primary care organisations that were members of a network of third sector primary care providers, Health Care Aotearoa (HCA). Data were collected by face-to-face interviews of managers and key informants using a semi-structured interview schedule, and from practice computer information systems. Overall the populations served were young: only 4% of patients were aged 65 years or older, and the ethnicity profile was highly atypical, with 21.8% European, 36% Maori, 22.7% Pacific Island, 12% other, and 7.5% not stated. Community services card holding rates were higher than recorded in other studies, and registered patients tended to live in highly deprived areas. HCA organisations had high patient to doctor ratios, in general over 2000:1, and there were significant differences in management structures between HCA practices and more traditional general practice. Third sector organisations provide services for populations that are disadvantaged in many respects. It is likely that New Zealand will continue to develop a diverse range of primary care organisational arrangements. Effort is now required to measure quality and effectiveness of services provided by different primary care organisations serving comparable populations.

Foundations for Knowledge Management Practices for the Fusion Sector

International Nuclear Information System (INIS)

Botrugno, A.

2016-01-01

Full text: This paper intends to overview the status of fusion activities and to present emerging issues related to the management of resources and knowledge in fusion projects; they can be better addressed by looking at appropriate methodologies and tools in the thematic areas of knowledge management. After a short introduction outlining the present transition phase of the worldwide fusion activity, I will present a preliminary analysis of emerging requirements and challenges, which creates the foundations for knowledge management practices for the fusion sector. Differences between the fusion and the nuclear sector will be also discussed, and appropriate practices for some selected challenges will be proposed and analyzed. (author

Rational designing of the internal water supply system in reconstructed residential buildings of mass standard series

OpenAIRE

Orlov Evgeny

2018-01-01

The issues of water supply system reconstruction in mass series buildings are reviewed with consideration of water- and resource saving. Principal points for location of plumbing cells in apartments, arrangement of water devices and wastewater receivers, selection of pipelines for reconstructed water line are described. Comparative analysis of design variants of inner water line before and following reconstruction are given. It was found that applying the developed system design approaches th...

Automatic Texture Optimization for 3D Urban Reconstruction

Directory of Open Access Journals (Sweden)

LI Ming

2017-03-01

Full Text Available In order to solve the problem of texture optimization in 3D city reconstruction by using multi-lens oblique images, the paper presents a method of seamless texture model reconstruction. At first, it corrects the radiation information of images by camera response functions and image dark channel. Then, according to the corresponding relevance between terrain triangular mesh surface model to image, implements occlusion detection by sparse triangulation method, and establishes the triangles' texture list of visible. Finally, combines with triangles' topology relationship in 3D triangular mesh surface model and means and variances of image, constructs a graph-cuts-based texture optimization algorithm under the framework of MRF(Markov random filed, to solve the discrete label problem of texture optimization selection and clustering, ensures the consistency of the adjacent triangles in texture mapping, achieves the seamless texture reconstruction of city. The experimental results verify the validity and superiority of our proposed method.

Management skills as competitive advantage. The case of public sector in Córdoba (Spain

Directory of Open Access Journals (Sweden)

Francisco Javier Pereda Pérez

2014-05-01

Full Text Available Purpose: To analyze the assessment of management skills in the public sector of Cordoba (Spain, trying to find out the possible relationship or influence between the administration of belonging to a set of management skills.Design/methodology/approach: Initial Theoretical study on the public sector, public management and managerial skills, conducting fieldwork affecting four administrations and application of statistical techniques contrast, which, finally, the analysis of their results and the conclusions drawn from them.Findings and Originality/value: The findings of an investigation into the management skills in the context of the public sector in the Province of Córdoba (Spain are presented. At present the personal, interpersonal and managerial skills to manage, are becoming increasingly important in companies and organizations. The strong commitment to the development of management skills becomes a true competitive advantage capable of leading business improvement processes in organizations, especially those in which the human resource is crucial, as is the case of the public sector.Research limitations/implications: To progress in research on management skills in the public sector, it would be desirable to develop more sector research to comparative studies the results of which lead to the establishment of specific labor policies aimed at improving the selection of public employees, developing training policies that emphasize the enhancement of skills and a true career based on merit and efficient performance.Social implications: The selection, training and development of public employees, and greater give greater importance to human resource processes in which the skills and competencies should fill the role they need.Originality / value: The better knowledge of the public sector, the importance of having competent public managers , and basically point out the critical importance of developing leadership skills at all levels

Accelerated gradient methods for total-variation-based CT image reconstruction

Energy Technology Data Exchange (ETDEWEB)

Joergensen, Jakob H.; Hansen, Per Christian [Technical Univ. of Denmark, Lyngby (Denmark). Dept. of Informatics and Mathematical Modeling; Jensen, Tobias L.; Jensen, Soeren H. [Aalborg Univ. (Denmark). Dept. of Electronic Systems; Sidky, Emil Y.; Pan, Xiaochuan [Chicago Univ., Chicago, IL (United States). Dept. of Radiology

2011-07-01

Total-variation (TV)-based CT image reconstruction has shown experimentally to be capable of producing accurate reconstructions from sparse-view data. In particular TV-based reconstruction is well suited for images with piecewise nearly constant regions. Computationally, however, TV-based reconstruction is demanding, especially for 3D imaging, and the reconstruction from clinical data sets is far from being close to real-time. This is undesirable from a clinical perspective, and thus there is an incentive to accelerate the solution of the underlying optimization problem. The TV reconstruction can in principle be found by any optimization method, but in practice the large scale of the systems arising in CT image reconstruction preclude the use of memory-intensive methods such as Newton's method. The simple gradient method has much lower memory requirements, but exhibits prohibitively slow convergence. In the present work we address the question of how to reduce the number of gradient method iterations needed to achieve a high-accuracy TV reconstruction. We consider the use of two accelerated gradient-based methods, GPBB and UPN, to solve the 3D-TV minimization problem in CT image reconstruction. The former incorporates several heuristics from the optimization literature such as Barzilai-Borwein (BB) step size selection and nonmonotone line search. The latter uses a cleverly chosen sequence of auxiliary points to achieve a better convergence rate. The methods are memory efficient and equipped with a stopping criterion to ensure that the TV reconstruction has indeed been found. An implementation of the methods (in C with interface to Matlab) is available for download from http://www2.imm.dtu.dk/~pch/TVReg/. We compare the proposed methods with the standard gradient method, applied to a 3D test problem with synthetic few-view data. We find experimentally that for realistic parameters the proposed methods significantly outperform the standard gradient method. (orig.)

Unit Advancement Flap for Lower Lip Reconstruction.

Science.gov (United States)

Ogino, Akihiro; Onishi, Kiyoshi; Okada, Emi; Nakamichi, Miho

2018-05-01

Lower lip reconstruction requires consideration of esthetic and functional outcome in selecting a surgical procedure, and reconstruction with local tissue is useful. The authors reconstructed full-thickness defects with a unit advancement flap. Reconstruction was performed using this method in 4 patients with lower lip squamous cell carcinoma in whom tumor resection with preservation of the mouth angle was possible. The lower lip resection width was 30 to 45 mm, accounting for 50% to 68% of the entire width of the lower lip. The flap was prepared by lateral extension from above the mental unit and matched with the potential wrinkle line of the lower lip in order to design a unit morphology surrounded by the anterior margin of the depressor labii inferioris muscle. It was elevated as a full-thickness flap composed of the orbicularis oris muscle, skin, and mucosa of the residual lower lip from the bilateral sides, and advanced to the defect. Flap transfer was adjusted by small triangular resection of the skin on the lateral side of the mental unit. The postoperative scar was inconspicuous in all patients and there was no impairment of the mouth opening-closing or articulation functions. This was a relatively simple surgical procedure. A blood supply of the flap was stable, and continuity of the orbicularis oris muscle was reconstructed by transferred the residual lower lip advancement flap from the bilateral sides. The postoperative mouth opening-closing function was sufficient, and dentures could be placed from an early phase in elderly patients. The postoperative scar was consistent with the lip unit morphology, being esthetically superior. This procedure may be applicable for reconstruction of defects approximately 1/3 to 2/3 the width of the lower lip where the mouth angle is preserved.

Cyclical absenteeism among private sector, public sector and self-employed workers.

Science.gov (United States)

Pfeifer, Christian

2013-03-01

This research note analyzes differences in the number of absent working days and doctor visits and in their cyclicality between private sector, public sector and self-employed workers. For this purpose, I used large-scale German survey data for the years 1995 to 2007 to estimate random effects negative binomial (count data) models. The main findings are as follows. (i) Public sector workers have on average more absent working days than private sector and self-employed workers. Self-employed workers have fewer absent working days and doctor visits than dependent employed workers. (ii) The regional unemployment rate is on average negatively correlated with the number of absent working days among private and public sector workers as well as among self-employed men. The correlations between regional unemployment rate and doctor visits are only significantly negative among private sector workers. Copyright © 2012 John Wiley & Sons, Ltd.

Agriculture Sectors

Science.gov (United States)

The Agriculture sectors comprise establishments primarily engaged in growing crops, raising animals, and harvesting fish and other animals. Find information on compliance, enforcement and guidance on EPA laws and regulations on the NAICS 111 & 112 sectors.

Accelerated gradient methods for total-variation-based CT image reconstruction

DEFF Research Database (Denmark)

Jørgensen, Jakob Heide; Jensen, Tobias Lindstrøm; Hansen, Per Christian

2011-01-01

incorporates several heuristics from the optimization literature such as Barzilai-Borwein (BB) step size selection and nonmonotone line search. The latter uses a cleverly chosen sequence of auxiliary points to achieve a better convergence rate. The methods are memory efficient and equipped with a stopping...... reconstruction can in principle be found by any optimization method, but in practice the large scale of the systems arising in CT image reconstruction preclude the use of memory-demanding methods such as Newton’s method. The simple gradient method has much lower memory requirements, but exhibits slow convergence...

Selection of the Sample for Data-Driven $Z \\to \

CERN Document Server

Krauss, Martin

2009-01-01

The topic of this study was to improve the selection of the sample for data-driven Z → ν ν background estimation, which is a major contribution in supersymmetric searches in ̄ a no-lepton search mode. The data is based on Z → + − samples using data created with ATLAS simulation software. This method works if two leptons are reconstructed, but using cuts that are typical for SUSY searches reconstruction efficiency for electrons and muons is rather low. For this reason it was tried to enhance the data sample. Therefore events were considered, where only one electron was reconstructed. In this case the invariant mass for the electron and each jet was computed to select the jet with the best match for the Z boson mass as not reconstructed electron. This way the sample can be extended but significantly looses purity because of also reconstructed background events. To improve this method other variables have to be considered which were not available for this study. Applying a similar method to muons using ...

“Crossing over”: appropriate private sector principles, to operate more reliable public sector water services

Directory of Open Access Journals (Sweden)

Kevin Wall

2008-04-01

Full Text Available Private sector institutions utilise many different business methods, some of which can selectively be adapted for use by organisations outside the private sector, to the benefit of their service delivery responsibilities. But the best of the appropriate practices from the private sector have often “not crossed over”. The Water Research Commission (WRC of South Africa, working in collaboration with the Council for Scientific and Industrial Research (CSIR, finds that the concept of franchising, so successfully used by the private sector to deliver many goods and services, if applied to water services operation and maintenance, could alleviate and address many challenges in the management of water services. At the same time, franchising could provide an ideal stimulus to support the development of local enterprises, all within the municipal service delivery environment. Franchisee water service providers, dependent for their livelihood on the success of their business, would have a strong incentive to perform, and would also enjoy the benefit of the franchisor’s expert guidance and quality assurance. Some areas for potential franchising include meter management, billing, plumbing, pressure management, sewer maintenance, and wastewater treatment processes. The help from the franchisor would be of particular value to water services authorities at a distance from the major urban centres. Few of these authorities can afford to employ competent qualified staff, and often non-compliance with the laid down performance standards is a direct consequence of this lack. Significant improvements would soon be seen if the generally under-qualified and under-resourced water services staff could have this ongoing support, mentoring and quality control — or if the authority could enter into partnerships with small local enterprises or NGOs which would, through franchising, enjoy the necessary ongoing support, mentoring and quality control, and would have

Transient recycling of resected bone to facilitate mandibular reconstruction--a technical note.

Science.gov (United States)

Lee, Jing-Wei; Tsai, Shin-Sheng; Kuo, Yao-Lung

2006-10-01

Mandibular reconstruction requires considerable sculptural skills. The intriguingly complex configuration of the structure is difficult to reproduce. It is thus imperative for surgeons to seek a technique that improves the precision of the reconstruction. A 55-year-old male presented with a full thickness cancer (T4+) of his left cheek. Radical ablative surgery resulted in an extensive loss of bone and soft tissue mandating major reconstruction. The resected bony specimen was thoroughly denuded, autoclaved, and then placed back into its original site so that the mandible resumed its pre-surgical configuration. A reconstruction plate was applied to maintain structural stability, then the "recycled bone" was used as a template and replaced with a free fibular graft. The patient fared well and a follow-up panoramic radiograph demonstrated good alignment and symmetry of the reconstructed mandible. This method is a viable option for segmental mandibulectomy defect repair in selected cases. Using this technique, it is possible to restore the original bony contour expediently and accurately.

ISC-EHB: Reconstruction of a robust earthquake dataset

Science.gov (United States)

Weston, J.; Engdahl, E. R.; Harris, J.; Di Giacomo, D.; Storchak, D. A.

2018-04-01

The EHB Bulletin of hypocentres and associated travel-time residuals was originally developed with procedures described by Engdahl, Van der Hilst and Buland (1998) and currently ends in 2008. It is a widely used seismological dataset, which is now expanded and reconstructed, partly by exploiting updated procedures at the International Seismological Centre (ISC), to produce the ISC-EHB. The reconstruction begins in the modern period (2000-2013) to which new and more rigorous procedures for event selection, data preparation, processing, and relocation are applied. The selection criteria minimise the location bias produced by unmodelled 3D Earth structure, resulting in events that are relatively well located in any given region. Depths of the selected events are significantly improved by a more comprehensive review of near station and secondary phase travel-time residuals based on ISC data, especially for the depth phases pP, pwP and sP, as well as by a rigorous review of the event depths in subduction zone cross sections. The resulting cross sections and associated maps are shown to provide details of seismicity in subduction zones in much greater detail than previously achievable. The new ISC-EHB dataset will be especially useful for global seismicity studies and high-frequency regional and global tomographic inversions.

Cultural reconstruction and experimental exploration for peace in ...

African Journals Online (AJOL)

Cultural reconstruction and experimental exploration for peace in Olu Obafemi's Dark times are over? ... The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader). If you would like more information about how to print, save, ...

Breast reconstruction after mastectomy

Directory of Open Access Journals (Sweden)

Daniel eSchmauss

2016-01-01

Full Text Available Breast cancer is the leading cause of cancer death in women worldwide. Its surgical approach has become less and less mutilating in the last decades. However, the overall number of breast reconstructions has significantly increased lately. Nowadays breast reconstruction should be individualized at its best, first of all taking into consideration oncological aspects of the tumor, neo-/adjuvant treatment and genetic predisposition, but also its timing (immediate versus delayed breast reconstruction, as well as the patient’s condition and wish. This article gives an overview over the various possibilities of breast reconstruction, including implant- and expander-based reconstruction, flap-based reconstruction (vascularized autologous tissue, the combination of implant and flap, reconstruction using non-vascularized autologous fat, as well as refinement surgery after breast reconstruction.

PolyFit: Polygonal Surface Reconstruction from Point Clouds

KAUST Repository

Nan, Liangliang; Wonka, Peter

2017-01-01

We propose a novel framework for reconstructing lightweight polygonal surfaces from point clouds. Unlike traditional methods that focus on either extracting good geometric primitives or obtaining proper arrangements of primitives, the emphasis of this work lies in intersecting the primitives (planes only) and seeking for an appropriate combination of them to obtain a manifold polygonal surface model without boundary.,We show that reconstruction from point clouds can be cast as a binary labeling problem. Our method is based on a hypothesizing and selection strategy. We first generate a reasonably large set of face candidates by intersecting the extracted planar primitives. Then an optimal subset of the candidate faces is selected through optimization. Our optimization is based on a binary linear programming formulation under hard constraints that enforce the final polygonal surface model to be manifold and watertight. Experiments on point clouds from various sources demonstrate that our method can generate lightweight polygonal surface models of arbitrary piecewise planar objects. Besides, our method is capable of recovering sharp features and is robust to noise, outliers, and missing data.

PolyFit: Polygonal Surface Reconstruction from Point Clouds

KAUST Repository

Nan, Liangliang

2017-12-25

We propose a novel framework for reconstructing lightweight polygonal surfaces from point clouds. Unlike traditional methods that focus on either extracting good geometric primitives or obtaining proper arrangements of primitives, the emphasis of this work lies in intersecting the primitives (planes only) and seeking for an appropriate combination of them to obtain a manifold polygonal surface model without boundary.,We show that reconstruction from point clouds can be cast as a binary labeling problem. Our method is based on a hypothesizing and selection strategy. We first generate a reasonably large set of face candidates by intersecting the extracted planar primitives. Then an optimal subset of the candidate faces is selected through optimization. Our optimization is based on a binary linear programming formulation under hard constraints that enforce the final polygonal surface model to be manifold and watertight. Experiments on point clouds from various sources demonstrate that our method can generate lightweight polygonal surface models of arbitrary piecewise planar objects. Besides, our method is capable of recovering sharp features and is robust to noise, outliers, and missing data.

Breast reconstruction - implants

Science.gov (United States)

Breast implants surgery; Mastectomy - breast reconstruction with implants; Breast cancer - breast reconstruction with implants ... harder to find a tumor if your breast cancer comes back. Getting breast implants does not take as long as breast reconstruction ...

Sectoral Innovatiohn Performance in the Biotechnology Sector. Final Report. Task 1

NARCIS (Netherlands)

Enzing, C.M.; Valk, T. van der

2010-01-01

In general the biotechnology sector can be qualified as a science driven and high tech sector. This applies for both the group of biotech start-ups that are present in each of the three sub-sectors (red biotech: health/pharma, green biotech: agrifood and white biotech: chemicals) as for the red

Stochastic mass-reconstruction: a new technique to reconstruct resonance masses of heavy particles decaying into tau lepton pairs

Energy Technology Data Exchange (ETDEWEB)

Maruyama, Sho [Fermilab

2015-12-15

The invariant mass of tau lepton pairs turns out to be smaller than the resonant mass of their mother particle and the invariant mass distribution is stretched wider than the width of the resonant mass as significant fraction of tau lepton momenta are carried away by neutrinos escaping undetected at collider experiments. This paper describes a new approach to reconstruct resonant masses of heavy particles decaying to tau leptons at such experiments. A typical example is a Z or Higgs boson decaying to a tau pair. Although the new technique can be used for each tau lepton separately, I combine two tau leptons to improve mass resolution by requiring the two tau leptons are lined up in a transverse plane. The method is simple to implement and complementary to the collinear approximation technique that works well when tau leptons are not lined up in a transverse plane. The reconstructed mass can be used as another variable in analyses that already use a visible tau pair mass and missing transverse momentum as these variables are not explicitly used in the stochastic mass-reconstruction to select signal-like events.

Reliable reconstruction of HIV-1 whole genome haplotypes reveals clonal interference and genetic hitchhiking among immune escape variants

Science.gov (United States)

2014-01-01

Background Following transmission, HIV-1 evolves into a diverse population, and next generation sequencing enables us to detect variants occurring at low frequencies. Studying viral evolution at the level of whole genomes was hitherto not possible because next generation sequencing delivers relatively short reads. Results We here provide a proof of principle that whole HIV-1 genomes can be reliably reconstructed from short reads, and use this to study the selection of immune escape mutations at the level of whole genome haplotypes. Using realistically simulated HIV-1 populations, we demonstrate that reconstruction of complete genome haplotypes is feasible with high fidelity. We do not reconstruct all genetically distinct genomes, but each reconstructed haplotype represents one or more of the quasispecies in the HIV-1 population. We then reconstruct 30 whole genome haplotypes from published short sequence reads sampled longitudinally from a single HIV-1 infected patient. We confirm the reliability of the reconstruction by validating our predicted haplotype genes with single genome amplification sequences, and by comparing haplotype frequencies with observed epitope escape frequencies. Conclusions Phylogenetic analysis shows that the HIV-1 population undergoes selection driven evolution, with successive replacement of the viral population by novel dominant strains. We demonstrate that immune escape mutants evolve in a dependent manner with various mutations hitchhiking along with others. As a consequence of this clonal interference, selection coefficients have to be estimated for complete haplotypes and not for individual immune escapes. PMID:24996694

Assessing the accuracy of ancestral protein reconstruction methods.

Directory of Open Access Journals (Sweden)

Paul D Williams

2006-06-01

Full Text Available The phylogenetic inference of ancestral protein sequences is a powerful technique for the study of molecular evolution, but any conclusions drawn from such studies are only as good as the accuracy of the reconstruction method. Every inference method leads to errors in the ancestral protein sequence, resulting in potentially misleading estimates of the ancestral protein's properties. To assess the accuracy of ancestral protein reconstruction methods, we performed computational population evolution simulations featuring near-neutral evolution under purifying selection, speciation, and divergence using an off-lattice protein model where fitness depends on the ability to be stable in a specified target structure. We were thus able to compare the thermodynamic properties of the true ancestral sequences with the properties of "ancestral sequences" inferred by maximum parsimony, maximum likelihood, and Bayesian methods. Surprisingly, we found that methods such as maximum parsimony and maximum likelihood that reconstruct a "best guess" amino acid at each position overestimate thermostability, while a Bayesian method that sometimes chooses less-probable residues from the posterior probability distribution does not. Maximum likelihood and maximum parsimony apparently tend to eliminate variants at a position that are slightly detrimental to structural stability simply because such detrimental variants are less frequent. Other properties of ancestral proteins might be similarly overestimated. This suggests that ancestral reconstruction studies require greater care to come to credible conclusions regarding functional evolution. Inferred functional patterns that mimic reconstruction bias should be reevaluated.

Assessing the accuracy of ancestral protein reconstruction methods.

Science.gov (United States)

Williams, Paul D; Pollock, David D; Blackburne, Benjamin P; Goldstein, Richard A

2006-06-23

The phylogenetic inference of ancestral protein sequences is a powerful technique for the study of molecular evolution, but any conclusions drawn from such studies are only as good as the accuracy of the reconstruction method. Every inference method leads to errors in the ancestral protein sequence, resulting in potentially misleading estimates of the ancestral protein's properties. To assess the accuracy of ancestral protein reconstruction methods, we performed computational population evolution simulations featuring near-neutral evolution under purifying selection, speciation, and divergence using an off-lattice protein model where fitness depends on the ability to be stable in a specified target structure. We were thus able to compare the thermodynamic properties of the true ancestral sequences with the properties of "ancestral sequences" inferred by maximum parsimony, maximum likelihood, and Bayesian methods. Surprisingly, we found that methods such as maximum parsimony and maximum likelihood that reconstruct a "best guess" amino acid at each position overestimate thermostability, while a Bayesian method that sometimes chooses less-probable residues from the posterior probability distribution does not. Maximum likelihood and maximum parsimony apparently tend to eliminate variants at a position that are slightly detrimental to structural stability simply because such detrimental variants are less frequent. Other properties of ancestral proteins might be similarly overestimated. This suggests that ancestral reconstruction studies require greater care to come to credible conclusions regarding functional evolution. Inferred functional patterns that mimic reconstruction bias should be reevaluated.

Adaptive algebraic reconstruction technique

International Nuclear Information System (INIS)

Lu Wenkai; Yin Fangfang

2004-01-01

Algebraic reconstruction techniques (ART) are iterative procedures for reconstructing objects from their projections. It is proven that ART can be computationally efficient by carefully arranging the order in which the collected data are accessed during the reconstruction procedure and adaptively adjusting the relaxation parameters. In this paper, an adaptive algebraic reconstruction technique (AART), which adopts the same projection access scheme in multilevel scheme algebraic reconstruction technique (MLS-ART), is proposed. By introducing adaptive adjustment of the relaxation parameters during the reconstruction procedure, one-iteration AART can produce reconstructions with better quality, in comparison with one-iteration MLS-ART. Furthermore, AART outperforms MLS-ART with improved computational efficiency

Sectoral panorama: the electric power sector in Europe

International Nuclear Information System (INIS)

Mons, L.

2003-10-01

This study takes stock on the main european markets to help the electric power companies in their decisions and investments. The first part presents the electric power sector structure in Europe. The second part is devoted to the market evolution for the different european markets (german, french, british, italian and spanish) with an analysis of the retail prices, the competition and the evolution perspectives. The third part presents the highlights in the electric power sector between 2001 and the middle of 2003. The enterprises management and strategies are presented in the fourth part. In the last part the document analyzes the financial performances of the sector and the electric power companies. (A.L.B.)

Promoting women's human rights: A qualitative analysis of midwives' perceptions about virginity control and hymen 'reconstruction'.

Science.gov (United States)

Christianson, Monica; Eriksson, Carola

2015-06-01

To explore midwives' perceptions regarding virginity control and hymen 'reconstructions', and how these practices can be debated from a gender perspective. An international group of 266 midwives answered an open-ended question in a Web survey. The great majority came from the Western world, among them, the majority were from Europe. Data were analysed using qualitative content analysis. Three themes emerged: misogynistic practices that cement the gender order, which revealed how the respondents viewed virginity control and hymen 'reconstructions'; raising public awareness and combatting practices that demean women, which were suggested as strategies by which to combat these practices; and promoting agency in women and providing culturally sensitive care, which were considered to improve health care encounters. Virginity control and hymen 'reconstructions' are elements of patriarchy, whereby violence and control are employed to subordinate women. To counter these practices, macro and micro-level activities are needed to expand women's human rights in the private and the public spheres. Political activism, international debates, collaboration between sectors such as health care and law-makers may lead to increased gender equality. A women-centred approach whereby women are empowered with agency will make women more capable of combatting virginity control and hymen 'reconstruction'.

World Best Practice Energy Intensity Values for SelectedIndustrial Sectors

Energy Technology Data Exchange (ETDEWEB)

Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky,Christina; Zhou, Nan

2007-06-05

"World best practice" energy intensity values, representingthe most energy-efficient processes that are in commercial use in atleast one location worldwide, are provided for the production of iron andsteel, aluminium, cement, pulp and paper, ammonia, and ethylene. Energyintensity is expressed in energy use per physical unit of output for eachof these commodities; most commonly these are expressed in metric tonnes(t). The energy intensity values are provided by major energy-consumingprocesses for each industrial sector to allow comparisons at the processlevel. Energy values are provided for final energy, defined as the energyused at the production facility as well as for primary energy, defined asthe energy used at the production facility as well as the energy used toproduce the electricity consumed at the facility. The "best practice"figures for energy consumption provided in this report should beconsidered as indicative, as these may depend strongly on the materialinputs.

Co-operative bidding of SMEs in health care sector.

Science.gov (United States)

Mezgár, István; Kovács, György; Bonfatti, Fabio

2002-01-01

Tendering become an important process for customers in the health care sector to select products and services from the market for the lowest price, with the highest quality and with the shortest delivery time. The number of SMEs (Small and Medium-sized Enterprises) delivering products or services for the health care sector is increasing, but they have usually limited capital and expertise to participate in tenders. The paper introduces a possible solution for this problem, when SMEs form special groups, so called Smart Bidding Organisations (SBO), to prepare a bid for the tender jointly. The SBO appears for the customer (tender issuer) as a single enterprise and the bidding procedure will be faster and less expensive in this way.

FINANCIAL PERFORMANCE EVOLUTIONS OF TEXTILE SECTOR ENTERPRISES

Directory of Open Access Journals (Sweden)

Nicoleta BARBUTA MISU

2005-01-01

Full Text Available The complete liberalization of international trade led to important changes in financial performancesof the national enterprises. This paper has in view to present the consequences of these changes fromthe macroeconomic level to microeconomic level. Thus, indicators of the financial performance forthree enterprises at the textile sector from Galati are studied selectively. The scope of this study isboth to realize a financial performance hierarchy and to present of their evolution directions in thefuture.

3D visibility analysis as a tool to validate ancient theatre reconstructions: the case of the large Roman theatre of Gortyn

Directory of Open Access Journals (Sweden)

Maria Cristina Manzetti

2016-11-01

Full Text Available With the diffusion of Virtual Archaeology, many projects in the field of Cultural Heritage attempt to virtually reconstruct historical buildings of different types. Unfortunately, some of these 3D reconstructions still have as principal aim to impress the external users, while the correct interpretation of the buildings modeled is much more important in the domain of archaeological research. Still more critical is the situation when we have to encounter a reconstruction of a monument which is not visible anymore, or which consists only of few architectural remains. The main purpose of this paper is to introduce an innovative methodology to verify hypothetical scenarios of 3D architectural reconstructions, specifically for ancient theatres. In very recent time 3D visibility analysis applied to archaeological context using ArcGIS has been developed, in particular about social-urban studies. In this paper, visibility analysis in 3D contexts is used as an additional instrument to correctly reconstruct architectural elements of the large Roman theatre of Gortyn, in Crete. The results indicate that the level of visibility of the stage, and consequently of the presumed actors, from some of the more representative sectors of the cavea, is of crucial importance for leading to a right reconstruction model of the theatre.

A distributed multi-GPU system for high speed electron microscopic tomographic reconstruction.

Science.gov (United States)

Zheng, Shawn Q; Branlund, Eric; Kesthelyi, Bettina; Braunfeld, Michael B; Cheng, Yifan; Sedat, John W; Agard, David A

2011-07-01

Full resolution electron microscopic tomographic (EMT) reconstruction of large-scale tilt series requires significant computing power. The desire to perform multiple cycles of iterative reconstruction and realignment dramatically increases the pressing need to improve reconstruction performance. This has motivated us to develop a distributed multi-GPU (graphics processing unit) system to provide the required computing power for rapid constrained, iterative reconstructions of very large three-dimensional (3D) volumes. The participating GPUs reconstruct segments of the volume in parallel, and subsequently, the segments are assembled to form the complete 3D volume. Owing to its power and versatility, the CUDA (NVIDIA, USA) platform was selected for GPU implementation of the EMT reconstruction. For a system containing 10 GPUs provided by 5 GTX295 cards, 10 cycles of SIRT reconstruction for a tomogram of 4096(2) × 512 voxels from an input tilt series containing 122 projection images of 4096(2) pixels (single precision float) takes a total of 1845 s of which 1032 s are for computation with the remainder being the system overhead. The same system takes only 39 s total to reconstruct 1024(2) × 256 voxels from 122 1024(2) pixel projections. While the system overhead is non-trivial, performance analysis indicates that adding extra GPUs to the system would lead to steadily enhanced overall performance. Therefore, this system can be easily expanded to generate superior computing power for very large tomographic reconstructions and especially to empower iterative cycles of reconstruction and realignment. Copyright © 2011 Elsevier B.V. All rights reserved.

From Principle to Action. An Analysis of the Financial Sector's Approach to Addressing Climate Change

International Nuclear Information System (INIS)

Mudde, P.; Abadie, A.

2008-05-01

The Ministry of the Housing, Spatial Planning and the Environment of the Netherlands (VROM), has taken the initiative to commission a study to determine best practice approaches within the financial sector regarding climate change. This study focuses on the indirect climate change footprint of the financial sector, i.e. the impact of the financial sector's clients on climate change. The study sets out to further the body of knowledge relating to the financial sector's approach to understanding and managing the effects of climate change on their clients' business. Specifically, it offers recommendations and potential next steps for both the financial sector and the Dutch government to enable a more focused and definitive approach to understanding, addressing and incorporating climate change considerations into decision-making procedures and policy development. The paper comprises the following analysis: Chapter 1 is an introduction describing why climate change is relevant to the financial sector, and introduces 18 financial institutions which were selected as the basis for the study. Chapter 2 elaborates on challenges for the financial sector regarding the incorporation of climate change considerations into enhanced risk analysis and decision making. Chapter 3 provides a comprehensive overview of the main international business initiatives regarding climate change and sustainability. It can be seen as a summary of Annex I to this report, which identifies which initiatives the 18 financial institutions are involved in. Chapter 4 highlights selected best practices amongst the 18 financial institutions assessed. Chapter 5 provides the main conclusions of the study and puts forward general and specific recommendations and potential next steps for the Dutch government and the financial sector. The Annexes contain fact sheets containing information about the climate change strategy and main activities of these organisations

A reconstruction algorithm for coherent scatter computed tomography based on filtered back-projection

International Nuclear Information System (INIS)

Stevendaal, U. van; Schlomka, J.-P.; Harding, A.; Grass, M.

2003-01-01

Coherent scatter computed tomography (CSCT) is a reconstructive x-ray imaging technique that yields the spatially resolved coherent-scatter form factor of the investigated object. Reconstruction from coherently scattered x-rays is commonly done using algebraic reconstruction techniques (ART). In this paper, we propose an alternative approach based on filtered back-projection. For the first time, a three-dimensional (3D) filtered back-projection technique using curved 3D back-projection lines is applied to two-dimensional coherent scatter projection data. The proposed algorithm is tested with simulated projection data as well as with projection data acquired with a demonstrator setup similar to a multi-line CT scanner geometry. While yielding comparable image quality as ART reconstruction, the modified 3D filtered back-projection algorithm is about two orders of magnitude faster. In contrast to iterative reconstruction schemes, it has the advantage that subfield-of-view reconstruction becomes feasible. This allows a selective reconstruction of the coherent-scatter form factor for a region of interest. The proposed modified 3D filtered back-projection algorithm is a powerful reconstruction technique to be implemented in a CSCT scanning system. This method gives coherent scatter CT the potential of becoming a competitive modality for medical imaging or nondestructive testing

Reconstruction of hyperspectral image using matting model for classification

Science.gov (United States)

Xie, Weiying; Li, Yunsong; Ge, Chiru

2016-05-01

Although hyperspectral images (HSIs) captured by satellites provide much information in spectral regions, some bands are redundant or have large amounts of noise, which are not suitable for image analysis. To address this problem, we introduce a method for reconstructing the HSI with noise reduction and contrast enhancement using a matting model for the first time. The matting model refers to each spectral band of an HSI that can be decomposed into three components, i.e., alpha channel, spectral foreground, and spectral background. First, one spectral band of an HSI with more refined information than most other bands is selected, and is referred to as an alpha channel of the HSI to estimate the hyperspectral foreground and hyperspectral background. Finally, a combination operation is applied to reconstruct the HSI. In addition, the support vector machine (SVM) classifier and three sparsity-based classifiers, i.e., orthogonal matching pursuit (OMP), simultaneous OMP, and OMP based on first-order neighborhood system weighted classifiers, are utilized on the reconstructed HSI and the original HSI to verify the effectiveness of the proposed method. Specifically, using the reconstructed HSI, the average accuracy of the SVM classifier can be improved by as much as 19%.

Inspection of freeform surfaces considering uncertainties in measurement, localization and surface reconstruction

International Nuclear Information System (INIS)

Mehrad, Vahid; Xue, Deyi; Gu, Peihua

2013-01-01

Inspection of a manufactured freeform surface can be conducted by building its surface model and comparing this manufactured surface model with the ideal design surface model and its tolerance requirement. The manufactured freeform surface model is usually achieved by obtaining measurement points on the manufactured surface, transforming these measurement points from the measurement coordinate system to the design coordinate system through localization, and reconstructing the surface model using the localized measurement points. In this research, a method was developed to estimate the locations and their variances of any selected points on the reconstructed freeform surface considering different sources of uncertainties in measurement, localization and surface reconstruction processes. In this method, first locations and variances of the localized measurement points are calculated considering uncertainties of the measurement points and uncertainties introduced in the localization processes. Then locations and variances of points on the reconstructed freeform surface are obtained considering uncertainties of the localized measurement points and uncertainties introduced in the freeform surface reconstruction process. Two case studies were developed to demonstrate how these three different uncertainty sources influence the quality of the reconstructed freeform curve and freeform surface in inspection. (paper)

Machine Learning and Parallelism in the Reconstruction of LHCb and its Upgrade

Science.gov (United States)

De Cian, Michel

2016-11-01

The LHCb detector at the LHC is a general purpose detector in the forward region with a focus on reconstructing decays of c- and b-hadrons. For Run II of the LHC, a new trigger strategy with a real-time reconstruction, alignment and calibration was employed. This was made possible by implementing an offline-like track reconstruction in the high level trigger. However, the ever increasing need for a higher throughput and the move to parallelism in the CPU architectures in the last years necessitated the use of vectorization techniques to achieve the desired speed and a more extensive use of machine learning to veto bad events early on. This document discusses selected improvements in computationally expensive parts of the track reconstruction, like the Kalman filter, as well as an improved approach to get rid of fake tracks using fast machine learning techniques. In the last part, a short overview of the track reconstruction challenges for the upgrade of LHCb, is given. Running a fully software-based trigger, a large gain in speed in the reconstruction has to be achieved to cope with the 40 MHz bunch-crossing rate. Two possible approaches for techniques exploiting massive parallelization are discussed.

Machine Learning and Parallelism in the Reconstruction of LHCb and its Upgrade

International Nuclear Information System (INIS)

Cian, Michel De

2016-01-01

The LHCb detector at the LHC is a general purpose detector in the forward region with a focus on reconstructing decays of c- and b-hadrons. For Run II of the LHC, a new trigger strategy with a real-time reconstruction, alignment and calibration was employed. This was made possible by implementing an offline-like track reconstruction in the high level trigger. However, the ever increasing need for a higher throughput and the move to parallelism in the CPU architectures in the last years necessitated the use of vectorization techniques to achieve the desired speed and a more extensive use of machine learning to veto bad events early on. This document discusses selected improvements in computationally expensive parts of the track reconstruction, like the Kalman filter, as well as an improved approach to get rid of fake tracks using fast machine learning techniques. In the last part, a short overview of the track reconstruction challenges for the upgrade of LHCb, is given. Running a fully software-based trigger, a large gain in speed in the reconstruction has to be achieved to cope with the 40 MHz bunch-crossing rate. Two possible approaches for techniques exploiting massive parallelization are discussed

Reconstruction of the eruptive activity on the NE sector of Stromboli volcano: timing of flank eruptions since 15 ka

NARCIS (Netherlands)

Calvari, S.; Branca, S.; Corsaro, R.A.; De Beni, E.; Miraglia, L.; Norini, G.; Wijbrans, J.R.; Boschi, E.

2011-01-01

A multidisciplinary geological and compositional investigation allowed us to reconstruct the occurrence of flank eruptions on the lower NE flank of Stromboli volcano since 15 ka. The oldest flank eruption recognised is Roisa, which occurred at ~15 ka during the Vancori period, and has transitional

Evaluation of noise levels in manufacturing sectors in Thika district ...

African Journals Online (AJOL)

Noise is considered as any unwanted sound that may adversely affect the health and wellbeing of individuals or populations exposed. This study assessed the magnitude of occupational noise exposures to workers in different manufacturing sectors in Thika District‐Kenya. Systematic random sampling was used to select 8 ...

Staff/population ratios in South African public sector mental health ...

African Journals Online (AJOL)

To document existing staff/population ratios per 100 000 population in South African public sector mental health services. Design. Cross-sectional survey. ... The staff/population ratios per 100 000 population for selected personnel categories (with the interprovincial ranges in brackets) were as follows: total nursing staff 15.6 ...

Cochlear implant-related three-dimensional characteristics determined by micro-computed tomography reconstruction.

Science.gov (United States)

Ni, Yusu; Dai, Peidong; Dai, Chunfu; Li, Huawei

2017-01-01

To explore the structural characteristics of the cochlea in three-dimensional (3D) detail using 3D micro-computed tomography (mCT) image reconstruction of the osseous labyrinth, with the aim of improving the structural design of electrodes, the selection of stimulation sites, and the effectiveness of cochlear implantation. Three temporal bones were selected from among adult donors' temporal bone specimens. A micro-CT apparatus (GE eXplore) was used to scan three specimens with a voxel resolution of 45 μm. We obtained about 460 slices/specimen, which produced abundant data. The osseous labyrinth images of three specimens were reconstructed from mCT. The cochlea and its spiral characteristics were measured precisely using Able Software 3D-DOCTOR. The 3D images of the osseous labyrinth, including the cochlea, vestibule, and semicircular canals, were reconstructed. The 3D models of the cochlea showed the spatial relationships and surface structural characteristics. Quantitative data concerning the cochlea and its spiral structural characteristics were analyzed with regard to cochlear implantation. The 3D reconstruction of mCT images clearly displayed the detailed spiral structural characteristics of the osseous labyrinth. Quantitative data regarding the cochlea and its spiral structural characteristics could help to improve electrode structural design, signal processing, and the effectiveness of cochlear implantation. Clin. Anat. 30:39-43, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Sectoral Innovation Watch Biotechnology Sector. Final sector report

NARCIS (Netherlands)

Enzing, C.

2011-01-01

Biotechnology has evolved from a single set of technologies in the mid 1970s into a full grown technological field that is the driving force in innovation processes in many industrial sectors (pharmaceutical, medical, agriculture, food, chemical, environment, instruments). Nowadays, biotechnology is

Sectoral crediting mechanism: How far China has to go

International Nuclear Information System (INIS)

Cai Wenjia; Wang Can; Chen Jining; Wang Siqiang

2012-01-01

Based on the review of the basic design of the sectoral crediting mechanism (SCM) – a promising option for developing countries’ emission reduction commitments – this paper analyzes five important practical issues for China to solve before participating in SCM, which include (1) difficulties in determining a crediting baseline (2) the unsolved over-supply problem in the carbon market (3) the very likely “carbon credits falling short of mitigation costs” problem (4) the immature market-oriented price system jeopardizing the success of motivation incentives and (5) inadequate capacity building. Corresponding suggestions or compromise solutions are given after a discussion of each issue. It is also recommended that in order to witness SCM come into being, researchers and negotiators should endeavor to solve the practical issues that SCM meets now, bearing in mind the balance of interests of both developing and developed countries. Finally we believe that SCM’s political barriers can be overcome when technical, economic institutional and capacity problems are solved. - Highlights: ► Latest developments in Sectoral Crediting Mechanism design have been reviewed. ► Ten years would be an ideal duration to adjust sectoral crediting baseline in China. ► Specific sectors could be selected to solve the carbon credits over-supply problem. ► SCM credits may come short of the mitigation costs, claiming a rising carbon price. ► Pricing system in China’s electricity sector makes it not a good candidate for SCM.

The greenhouse gas intensity of the tourism sector: The case of Switzerland

International Nuclear Information System (INIS)

Perch-Nielsen, Sabine; Sesartic, Ana; Stucki, Matthias

2010-01-01

Greenhouse gas intensity is a ratio comparing the greenhouse gas (GHG) emissions of an activity or economic sector to the economic value it generates. In recent years, many countries have calculated the GHG intensity of their economic sectors as a basis for policy making. The GHG intensity of tourism, however, has not been determined since tourism is not measured as an economic sector in the national accounts. While for tourism-reliant countries it would be useful to know this quantity, a number of difficulties exist in its determination. In this study, we determine the GHG intensity of tourism's value added in Switzerland by means of a detailed bottom-up approach with the main methodological focus on how to achieve consistent system boundaries. For comparison, we calculate the tourism sector's GHG intensity for selected European countries using a simpler top-down approach. Our results show that the Swiss tourism sector is more than four times more GHG intensive than the Swiss economy on average. Of all tourism's sub-sectors, air transport stands out as the sector with by far largest emissions (80%) and highest GHG intensity. The results for other countries make similar, if not as pronounced, patterns apparent. We discuss the results and possible mitigation options against the background of the goal to prevent dangerous climate change.

Machine learning and parallelism in the reconstruction of LHCb and its upgrade

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00260810

2016-01-01

The LHCb detector at the LHC is a general purpose detector in the forward region with a focus on reconstructing decays of c- and b-hadrons. For Run II of the LHC, a new trigger strategy with a real-time reconstruction, alignment and calibration was employed. This was made possible by implementing an oine-like track reconstruction in the high level trigger. However, the ever increasing need for a higher throughput and the move to parallelism in the CPU architectures in the last years necessitated the use of vectorization techniques to achieve the desired speed and a more extensive use of machine learning to veto bad events early on. This document discusses selected improvements in computationally expensive parts of the track reconstruction, like the Kalman filter, as well as an improved approach to get rid of fake tracks using fast machine learning techniques. In the last part, a short overview of the track reconstruction challenges for the upgrade of LHCb, is given. Running a fully software-based trigger, a l...

Grammar-based Automatic 3D Model Reconstruction from Terrestrial Laser Scanning Data

Science.gov (United States)

Yu, Q.; Helmholz, P.; Belton, D.; West, G.

2014-04-01

The automatic reconstruction of 3D buildings has been an important research topic during the last years. In this paper, a novel method is proposed to automatically reconstruct the 3D building models from segmented data based on pre-defined formal grammar and rules. Such segmented data can be extracted e.g. from terrestrial or mobile laser scanning devices. Two steps are considered in detail. The first step is to transform the segmented data into 3D shapes, for instance using the DXF (Drawing Exchange Format) format which is a CAD data file format used for data interchange between AutoCAD and other program. Second, we develop a formal grammar to describe the building model structure and integrate the pre-defined grammars into the reconstruction process. Depending on the different segmented data, the selected grammar and rules are applied to drive the reconstruction process in an automatic manner. Compared with other existing approaches, our proposed method allows the model reconstruction directly from 3D shapes and takes the whole building into account.

PET reconstruction

International Nuclear Information System (INIS)

O'Sullivan, F.; Pawitan, Y.; Harrison, R.L.; Lewellen, T.K.

1990-01-01

In statistical terms, filtered backprojection can be viewed as smoothed Least Squares (LS). In this paper, the authors report on improvement in LS resolution by: incorporating locally adaptive smoothers, imposing positivity and using statistical methods for optimal selection of the resolution parameter. The resulting algorithm has high computational efficiency relative to more elaborate Maximum Likelihood (ML) type techniques (i.e. EM with sieves). Practical aspects of the procedure are discussed in the context of PET and illustrations with computer simulated and real tomograph data are presented. The relative recovery coefficients for a 9mm sphere in a computer simulated hot-spot phantom range from .3 to .6 when the number of counts ranges from 10,000 to 640,000 respectively. The authors will also present results illustrating the relative efficacy of ML and LS reconstruction techniques

Economic Multipliers and Sectoral Linkages: Ghana and the New Oil Sector

Directory of Open Access Journals (Sweden)

Dennis Nchor

2016-01-01

Full Text Available The study seeks to assess the structure of the economy of Ghana in terms of changes in the economic structure before and after the production of oil in commercial quantities. This is viewed with regards to economic multipliers, sectoral interdependence and trade concentration. The results show that changes occurred with regards to multipliers and sectoral interdependence. The output multipliers of most sectors have declined. The results also show that the agricultural sector experienced an initial decline in its growth while industry experienced an increase. The performance of the services sector was relatively stable for the period covered by the study. There is a decline in the level of trade concentration though on a whole the concentration index is still high. The study employed input-output modeling techniques and the data was obtained from the Ghana statistical service and the World Development Indicators.

A multi-sector assessment of community organizational capacity for promotion of Chinese immigrant worker health.

Science.gov (United States)

Tsai, Jenny H-C; Thompson, Elaine A

2017-12-01

Community-based collaborative approaches have received increased attention as a means for addressing occupational health disparities. Organizational capacity, highly relevant to engaging and sustaining community partnerships, however, is rarely considered in occupational health research. To characterize community organizational capacity specifically relevant to Chinese immigrant worker health, we used a cross-sectional, descriptive design with 36 agencies from six community sectors in King County, Washington. Joint interviews, conducted with two representatives from each agency, addressed three dimensions of organizational capacity: organizational commitment, resources, and flexibility. Descriptive statistics were used to capture the patterning of these dimensions by community sector. Organizational capacity varied widely across and within sectors. Chinese and Pan-Asian service sectors indicated higher capacity for Chinese immigrant worker health than did Chinese faith-based, labor union, public, and Pan-ethnic nonprofit sectors. Variation in organizational capacity in community sectors can inform selection of collaborators for community-based, immigrant worker health interventions. © 2017 Wiley Periodicals, Inc.

Cine-MRI swallowing evaluation after tongue reconstruction

Energy Technology Data Exchange (ETDEWEB)

Hartl, Dana M. [Department of Otolaryngology-Head and Neck Surgery, Institute Gustave Roussy, 39 rue Camille Desmoulins, 94805 Villejuif Cedex (France)], E-mail: dmhartl@aol.com; Kolb, Frederic; Bretagne, Evelyne [Department of Otolaryngology-Head and Neck Surgery, Institute Gustave Roussy, 39 rue Camille Desmoulins, 94805 Villejuif Cedex (France); Bidault, Francois; Sigal, Robert [Department of Radiology, Institut Gustave Roussy, 39 rue Camille Desmoulins, 94805 Villejuif Cedex (France)

2010-01-15

Objective: To determine the feasibility of cine-MRI for non-invasive swallowing evaluation after surgery for lingual carcinoma with reconstruction using microvascular free flaps. Methods: Ten patients with stage IV carcinoma of the mobile tongue and/or tongue base treated by surgical resection and reconstruction with a free flap were evaluated after an average of 4.3 years (range: 1.5-11 years), using cine-MRI in 'single-shot fast spin echo' (SSFSE) mode. Fiberoptic laryngoscopy of swallowing was performed before MRI to detect aspiration. The tolerance and ability to complete the exam were noted. The mobilities of the oral and pharyngeal structures visualized were evaluated as normal, reduced or increased. Results: Cine-MRI was well tolerated in all cases; 'dry' swallow was performed for the 2 patients with clinical aspiration. Tongue base-pharyngeal wall contact was observed in 5 cases. An increased anterior tongue recoil, increased mandibular recoil, increased posterior oropharyngeal wall advancement and an increased laryngeal elevation were observed in 4 cases. One case of a passive 'slide' mechanism was observed. Conclusions: Cine-MRI is a safe, non-invasive technique for the evaluation of the mobility of oral and oropharyngeal structures after free-flap reconstruction of the tongue. For selected cases, it may be complementary to clinical examination for evaluation of dysphagia after surgery and free-flap reconstruction. Further technical advances will be necessary before cine-MRI can replace videofluoroscopy, however.

Cine-MRI swallowing evaluation after tongue reconstruction

International Nuclear Information System (INIS)

Hartl, Dana M.; Kolb, Frederic; Bretagne, Evelyne; Bidault, Francois; Sigal, Robert

2010-01-01

Objective: To determine the feasibility of cine-MRI for non-invasive swallowing evaluation after surgery for lingual carcinoma with reconstruction using microvascular free flaps. Methods: Ten patients with stage IV carcinoma of the mobile tongue and/or tongue base treated by surgical resection and reconstruction with a free flap were evaluated after an average of 4.3 years (range: 1.5-11 years), using cine-MRI in 'single-shot fast spin echo' (SSFSE) mode. Fiberoptic laryngoscopy of swallowing was performed before MRI to detect aspiration. The tolerance and ability to complete the exam were noted. The mobilities of the oral and pharyngeal structures visualized were evaluated as normal, reduced or increased. Results: Cine-MRI was well tolerated in all cases; 'dry' swallow was performed for the 2 patients with clinical aspiration. Tongue base-pharyngeal wall contact was observed in 5 cases. An increased anterior tongue recoil, increased mandibular recoil, increased posterior oropharyngeal wall advancement and an increased laryngeal elevation were observed in 4 cases. One case of a passive 'slide' mechanism was observed. Conclusions: Cine-MRI is a safe, non-invasive technique for the evaluation of the mobility of oral and oropharyngeal structures after free-flap reconstruction of the tongue. For selected cases, it may be complementary to clinical examination for evaluation of dysphagia after surgery and free-flap reconstruction. Further technical advances will be necessary before cine-MRI can replace videofluoroscopy, however.

Computed Tomography Image Quality Evaluation of a New Iterative Reconstruction Algorithm in the Abdomen (Adaptive Statistical Iterative Reconstruction-V) a Comparison With Model-Based Iterative Reconstruction, Adaptive Statistical Iterative Reconstruction, and Filtered Back Projection Reconstructions.

Science.gov (United States)

Goodenberger, Martin H; Wagner-Bartak, Nicolaus A; Gupta, Shiva; Liu, Xinming; Yap, Ramon Q; Sun, Jia; Tamm, Eric P; Jensen, Corey T

The purpose of this study was to compare abdominopelvic computed tomography images reconstructed with adaptive statistical iterative reconstruction-V (ASIR-V) with model-based iterative reconstruction (Veo 3.0), ASIR, and filtered back projection (FBP). Abdominopelvic computed tomography scans for 36 patients (26 males and 10 females) were reconstructed using FBP, ASIR (80%), Veo 3.0, and ASIR-V (30%, 60%, 90%). Mean ± SD patient age was 32 ± 10 years with mean ± SD body mass index of 26.9 ± 4.4 kg/m. Images were reviewed by 2 independent readers in a blinded, randomized fashion. Hounsfield unit, noise, and contrast-to-noise ratio (CNR) values were calculated for each reconstruction algorithm for further comparison. Phantom evaluation of low-contrast detectability (LCD) and high-contrast resolution was performed. Adaptive statistical iterative reconstruction-V 30%, ASIR-V 60%, and ASIR 80% were generally superior qualitatively compared with ASIR-V 90%, Veo 3.0, and FBP (P ASIR-V 60% with respective CNR values of 5.54 ± 2.39, 8.78 ± 3.15, and 3.49 ± 1.77 (P ASIR 80% had the best and worst spatial resolution, respectively. Adaptive statistical iterative reconstruction-V 30% and ASIR-V 60% provided the best combination of qualitative and quantitative performance. Adaptive statistical iterative reconstruction 80% was equivalent qualitatively, but demonstrated inferior spatial resolution and LCD.

Reporting clinical outcomes of breast reconstruction: a systematic review.

Science.gov (United States)

Potter, S; Brigic, A; Whiting, P F; Cawthorn, S J; Avery, K N L; Donovan, J L; Blazeby, J M

2011-01-05

Breast reconstruction after mastectomy for cancer requires accurate evaluation to inform evidence-based participatory decision making, but the standards of outcome reporting after breast reconstruction have not previously been considered. We used extensive searches to identify articles reporting surgical outcomes of breast reconstruction. We extracted data using published criteria for complication reporting modified to reflect reconstructive practice. Study designs included randomized controlled trials, cohort studies, and case series. The Cochrane Risk of Bias tool was used to critically appraise all study designs. Other criteria used to assess the studies were selection and funding bias, statistical power calculations, and institutional review board approval. Wilcoxon signed rank tests were used to compare the breadth and frequency of study outcomes, and χ² tests were used to compare the number of studies in each group reporting each of the published criteria. All statistical tests were two-sided. Surgical complications following breast reconstruction in 42,146 women were evaluated in 134 studies. These included 11 (8.2%) randomized trials, 74 (55.2%) cohort studies, and 49 (36.6%) case series. Fifty-three percent of studies demonstrated a disparity between methods and results in the numbers of complications reported. Complications were defined by 87 (64.9%) studies and graded by 78 (58.2%). Details such as the duration of follow-up and risk factors for adverse outcomes were omitted from 47 (35.1%) and 58 (43.3%) studies, respectively. Overall, the studies defined fewer than 20% of the complications they reported, and the definitions were largely inconsistent. The results of this systematic review suggest that outcome reporting in breast reconstruction is inconsistent and lacks methodological rigor. The development of a standardized core outcome set is recommended to improve outcome reporting in breast reconstruction.

Visual image reconstruction from human brain activity: A modular decoding approach

International Nuclear Information System (INIS)

Miyawaki, Yoichi; Uchida, Hajime; Yamashita, Okito; Sato, Masa-aki; Kamitani, Yukiyasu; Morito, Yusuke; Tanabe, Hiroki C; Sadato, Norihiro

2009-01-01

Brain activity represents our perceptual experience. But the potential for reading out perceptual contents from human brain activity has not been fully explored. In this study, we demonstrate constraint-free reconstruction of visual images perceived by a subject, from the brain activity pattern. We reconstructed visual images by combining local image bases with multiple scales, whose contrasts were independently decoded from fMRI activity by automatically selecting relevant voxels and exploiting their correlated patterns. Binary-contrast, 10 x 10-patch images (2 100 possible states), were accurately reconstructed without any image prior by measuring brain activity only for several hundred random images. The results suggest that our approach provides an effective means to read out complex perceptual states from brain activity while discovering information representation in multi-voxel patterns.

Pre-operative CT angiography and three-dimensional image post processing for deep inferior epigastric perforator flap breast reconstructive surgery.

Science.gov (United States)

Lam, D L; Mitsumori, L M; Neligan, P C; Warren, B H; Shuman, W P; Dubinsky, T J

2012-12-01

Autologous breast reconstructive surgery with deep inferior epigastric artery (DIEA) perforator flaps has become the mainstay for breast reconstructive surgery. CT angiography and three-dimensional image post processing can depict the number, size, course and location of the DIEA perforating arteries for the pre-operative selection of the best artery to use for the tissue flap. Knowledge of the location and selection of the optimal perforating artery shortens operative times and decreases patient morbidity.

Communication, Relationships, and Religious Difference in the Northern Ireland Workplace: A Study of Private and Public Sector Organizations

Science.gov (United States)

Dickson, David; Hargie, Owen; Wilson, Noel

2008-01-01

Four large organizations, two each from the private and public sectors of the Northern Ireland economy, were selected for this study which, first, explored the effects of religion-based workforce difference on intergroup relationships, second, investigated the contribution of organizational sector to communicative differences, and third, gauged…

Extending voluntary health insurance to the informal sector: experiences and expectations of the informal sector in Kenya [version 1; referees: 2 approved

Directory of Open Access Journals (Sweden)

Edwine W. Barasa

2017-09-01

Full Text Available Background: Kenya has made a policy decision to use contributory health insurance as one of its key pre-payment health financing mechanisms. The National Hospital Insurance Fund (NHIF is the main health insurer in Kenya. While the NHIF has hitherto focused its efforts on providing health insurance coverage to individuals in the formal sector, it has recently broadened its focus to include individuals in the informal sector. This paper provides an analysis of the perceptions, and experiences of informal sector individuals in Kenya with regard to enrolment with the NHIF.  Methods: We collected data through key informant interviews (39 in two purposefully selected counties. Study participants were drawn from healthcare facilities contracted by the NHIF, and current, former, and prospective informal sector members. We analyzed data using a grounded approach.  Results: Participants felt that the NHIF provided inadequate information about the registration and membership processes as well as benefit entitlements. There was variable and inconsistent communication by the NHIF. There was also variance between the official benefit package and the actual benefits received by members. The NHIF registration requirements and processes presented an administrative barrier to obtaining membership. The NHIF premium level and contribution mechanism presents a financial barrier to current and prospective members. Healthcare providers discriminated against NHIF members compared to cash-payers or private insurance holders.  Conclusions: The NHIF could improve enrolment and retention of informal sector individuals by; 1 using communication strategies that are effective at reaching the informal sector, 2 improving the affordability of the premium rates, 3 simplifying the enrolment requirements and process, and 4 strengthening accountability mechanisms between itself and healthcare facilities to ensure that enrolled members receive the benefits that they are

Using Spherical-Harmonics Expansions for Optics Surface Reconstruction from Gradients.

Science.gov (United States)

Solano-Altamirano, Juan Manuel; Vázquez-Otero, Alejandro; Khikhlukha, Danila; Dormido, Raquel; Duro, Natividad

2017-11-30

In this paper, we propose a new algorithm to reconstruct optics surfaces (aka wavefronts) from gradients, defined on a circular domain, by means of the Spherical Harmonics. The experimental results indicate that this algorithm renders the same accuracy, compared to the reconstruction based on classical Zernike polynomials, using a smaller number of polynomial terms, which potentially speeds up the wavefront reconstruction. Additionally, we provide an open-source C++ library, released under the terms of the GNU General Public License version 2 (GPLv2), wherein several polynomial sets are coded. Therefore, this library constitutes a robust software alternative for wavefront reconstruction in a high energy laser field, optical surface reconstruction, and, more generally, in surface reconstruction from gradients. The library is a candidate for being integrated in control systems for optical devices, or similarly to be used in ad hoc simulations. Moreover, it has been developed with flexibility in mind, and, as such, the implementation includes the following features: (i) a mock-up generator of various incident wavefronts, intended to simulate the wavefronts commonly encountered in the field of high-energy lasers production; (ii) runtime selection of the library in charge of performing the algebraic computations; (iii) a profiling mechanism to measure and compare the performance of different steps of the algorithms and/or third-party linear algebra libraries. Finally, the library can be easily extended to include additional dependencies, such as porting the algebraic operations to specific architectures, in order to exploit hardware acceleration features.

Full offline reconstruction in real-time with the LHCb detector

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00341115

2016-01-01

This document describes the novel, unique in High Energy Physics, real-time alignment and calibration of the full LHCb detector. The LHCb experiment has been designed as a dedicated heavy flavour physics experiment focused on the reconstruction of c and b hadrons. The LHCb detector is a single-arm forward spectrometer, which measures proton-proton interactions at the LHC. The operational bunch crossing rate is several orders of magnitude above the current abilities of data recording and storage. Therefore, a trigger system has been implemented to reduce this rate to an acceptable value. The LHCb trigger system has been redesigned during the 2013-2015 long shutdown, achieving oine-quality alignment and calibration online. It also allows analyses to be performed entirely at the trigger level. In addition, having the best performing reconstruction in the trigger gives the possibility to fully use the particle identification selection criteria and greatly increases the eciency, in particular for the selection of ...

A Robust Shape Reconstruction Method for Facial Feature Point Detection

Directory of Open Access Journals (Sweden)

Shuqiu Tan

2017-01-01

Full Text Available Facial feature point detection has been receiving great research advances in recent years. Numerous methods have been developed and applied in practical face analysis systems. However, it is still a quite challenging task because of the large variability in expression and gestures and the existence of occlusions in real-world photo shoot. In this paper, we present a robust sparse reconstruction method for the face alignment problems. Instead of a direct regression between the feature space and the shape space, the concept of shape increment reconstruction is introduced. Moreover, a set of coupled overcomplete dictionaries termed the shape increment dictionary and the local appearance dictionary are learned in a regressive manner to select robust features and fit shape increments. Additionally, to make the learned model more generalized, we select the best matched parameter set through extensive validation tests. Experimental results on three public datasets demonstrate that the proposed method achieves a better robustness over the state-of-the-art methods.

El sector productivo The productive sector

Directory of Open Access Journals (Sweden)

Encarna Santolaria

2004-05-01

Full Text Available El crecimiento del sector servicios en detrimento del sector primario, la flexibilidad del mercado laboral y la progresiva incorporación de la mujer a dicho mercado son los cambios más destacados del sector productivo español en los últimos 25 años. Las mujeres en España presentan tasas de desempleo, trabajo temporal y a tiempo parcial mucho mayores que los hombres. Además, las condiciones de acceso al mercado de trabajo y las condiciones en las que éste se desempeña están también muy relacionadas con la clase social. Las mujeres cubren la escasez de servicios públicos destinados al cuidado de las criaturas pequeñas y de las personas mayores o dependientes, y realizan una labor de cuidadoras informales sin reconocimiento social, lo cual les impide el acceso a un puesto de trabajo o su mantenimiento y limita de forma decisiva las posibilidades de desarrollo y progreso profesional. Todo ello indica una clara diferencia con respecto a los hombres en cuanto a la frecuencia de contratos temporales y de tiempo parcial, así como en la segregación laboral, tanto horizontal como vertical. Estos aspectos de segregación son más evidentes en las mujeres de clases sociales menos privilegiadas, en las que se concentran las peores condiciones de acceso al mercado laboral y de trabajo. En España es imprescindible llevar a cabo políticas que ofrezcan servicios que permitan compatibilizar la vida laboral y familiar en condiciones de mayor equidad, tanto en razón de género como de clase social.In the last 25 years, the production sector in Spain has undergone important changes. Among these changes, the important growth of the services sector at the expense of the primary sector, the increasing flexibility of the labour market, and the rise in the female workforce could be considered as the most relevant ones. Spanish women have higher rates of unemployment, temporary jobs and part time contracts than Spanish men. Moreover, job access and work

A distributed multi-GPU system for high speed electron microscopic tomographic reconstruction

Energy Technology Data Exchange (ETDEWEB)

Zheng, Shawn Q.; Branlund, Eric; Kesthelyi, Bettina; Braunfeld, Michael B.; Cheng, Yifan; Sedat, John W. [The Howard Hughes Medical Institute and the W.M. Keck Advanced Microscopy Laboratory, Department of Biochemistry and Biophysics, University of California, San Francisco, 600, 16th Street, Room S412D, CA 94158-2517 (United States); Agard, David A., E-mail: agard@msg.ucsf.edu [The Howard Hughes Medical Institute and the W.M. Keck Advanced Microscopy Laboratory, Department of Biochemistry and Biophysics, University of California, San Francisco, 600, 16th Street, Room S412D, CA 94158-2517 (United States)

2011-07-15

Full resolution electron microscopic tomographic (EMT) reconstruction of large-scale tilt series requires significant computing power. The desire to perform multiple cycles of iterative reconstruction and realignment dramatically increases the pressing need to improve reconstruction performance. This has motivated us to develop a distributed multi-GPU (graphics processing unit) system to provide the required computing power for rapid constrained, iterative reconstructions of very large three-dimensional (3D) volumes. The participating GPUs reconstruct segments of the volume in parallel, and subsequently, the segments are assembled to form the complete 3D volume. Owing to its power and versatility, the CUDA (NVIDIA, USA) platform was selected for GPU implementation of the EMT reconstruction. For a system containing 10 GPUs provided by 5 GTX295 cards, 10 cycles of SIRT reconstruction for a tomogram of 4096{sup 2}x512 voxels from an input tilt series containing 122 projection images of 4096{sup 2} pixels (single precision float) takes a total of 1845 s of which 1032 s are for computation with the remainder being the system overhead. The same system takes only 39 s total to reconstruct 1024{sup 2}x256 voxels from 122 1024{sup 2} pixel projections. While the system overhead is non-trivial, performance analysis indicates that adding extra GPUs to the system would lead to steadily enhanced overall performance. Therefore, this system can be easily expanded to generate superior computing power for very large tomographic reconstructions and especially to empower iterative cycles of reconstruction and realignment. -- Highlights: {yields} A distributed multi-GPU system has been developed for electron microscopic tomography (EMT). {yields} This system allows for rapid constrained, iterative reconstruction of very large volumes. {yields} This system can be easily expanded to generate superior computing power for large-scale iterative EMT realignment.

A distributed multi-GPU system for high speed electron microscopic tomographic reconstruction

International Nuclear Information System (INIS)

Zheng, Shawn Q.; Branlund, Eric; Kesthelyi, Bettina; Braunfeld, Michael B.; Cheng, Yifan; Sedat, John W.; Agard, David A.

2011-01-01

Full resolution electron microscopic tomographic (EMT) reconstruction of large-scale tilt series requires significant computing power. The desire to perform multiple cycles of iterative reconstruction and realignment dramatically increases the pressing need to improve reconstruction performance. This has motivated us to develop a distributed multi-GPU (graphics processing unit) system to provide the required computing power for rapid constrained, iterative reconstructions of very large three-dimensional (3D) volumes. The participating GPUs reconstruct segments of the volume in parallel, and subsequently, the segments are assembled to form the complete 3D volume. Owing to its power and versatility, the CUDA (NVIDIA, USA) platform was selected for GPU implementation of the EMT reconstruction. For a system containing 10 GPUs provided by 5 GTX295 cards, 10 cycles of SIRT reconstruction for a tomogram of 4096 2 x512 voxels from an input tilt series containing 122 projection images of 4096 2 pixels (single precision float) takes a total of 1845 s of which 1032 s are for computation with the remainder being the system overhead. The same system takes only 39 s total to reconstruct 1024 2 x256 voxels from 122 1024 2 pixel projections. While the system overhead is non-trivial, performance analysis indicates that adding extra GPUs to the system would lead to steadily enhanced overall performance. Therefore, this system can be easily expanded to generate superior computing power for very large tomographic reconstructions and especially to empower iterative cycles of reconstruction and realignment. -- Highlights: → A distributed multi-GPU system has been developed for electron microscopic tomography (EMT). → This system allows for rapid constrained, iterative reconstruction of very large volumes. → This system can be easily expanded to generate superior computing power for large-scale iterative EMT realignment.

An Analysis of Industry and Sector-Specific Impacts of a Japan-Philippines Economic Partnership

OpenAIRE

Escolar, Royce Elvin O.

2004-01-01

The paper aims to identify industry and macrolevel factors that affect competitiveness of selected sectors upon the implementation of the JPEPA. Priority sectors identified by the Department of Trade and Industry, accounting for 82% of total Philippine exports to Japan in 2002, were included in the study. For Philippine industries to gain, market access issues on trade facilitation, nontariff barriers and recognition of standards come into play especially for the service and agricultural sect...

GATS Impacts on Entry Modes and Defensive Marketing Strategies in the Egyptian Banking Sector

OpenAIRE

Lotayif, Mansour Salman Mohamad Abdel-Maguid

2004-01-01

This research examines the effects of GATS agreements, both on entry modes and defensive marketing strategies in the Egyptian banking sector. The research population is the Egyptian banking sector, employing a total of 83179, from which a representative sample (equal to 800 responses) was selected. As the research aims are diversified, this sample was divided into two main groups i.e. local banks and foreign branches, investigated using different questionnaires. The latter popu...

Key Financial Metrics on Australia's Higher Education Sector--December 2016

Science.gov (United States)

Australian Government Tertiary Education Quality and Standards Agency, 2016

2016-01-01

This report is the second release of financial information held by Tertiary Education Quality and Standards Agency (TEQSA). It provides a snapshot of selected key financial metrics across the Australian higher education sector. Data in this report has been sourced from TEQSA's 2015 data collection and relates to financial years ended 31 December…

Image Reconstruction. Chapter 13

Energy Technology Data Exchange (ETDEWEB)

Nuyts, J. [Department of Nuclear Medicine and Medical Imaging Research Center, Katholieke Universiteit Leuven, Leuven (Belgium); Matej, S. [Medical Image Processing Group, Department of Radiology, University of Pennsylvania, Philadelphia, PA (United States)

2014-12-15

This chapter discusses how 2‑D or 3‑D images of tracer distribution can be reconstructed from a series of so-called projection images acquired with a gamma camera or a positron emission tomography (PET) system [13.1]. This is often called an ‘inverse problem’. The reconstruction is the inverse of the acquisition. The reconstruction is called an inverse problem because making software to compute the true tracer distribution from the acquired data turns out to be more difficult than the ‘forward’ direction, i.e. making software to simulate the acquisition. There are basically two approaches to image reconstruction: analytical reconstruction and iterative reconstruction. The analytical approach is based on mathematical inversion, yielding efficient, non-iterative reconstruction algorithms. In the iterative approach, the reconstruction problem is reduced to computing a finite number of image values from a finite number of measurements. That simplification enables the use of iterative instead of mathematical inversion. Iterative inversion tends to require more computer power, but it can cope with more complex (and hopefully more accurate) models of the acquisition process.

One-Stage Immediate Breast Reconstruction: A Concise Review

Directory of Open Access Journals (Sweden)

Nicolò Bertozzi

2017-01-01

Full Text Available Background. One-stage direct-to-implant immediate breast reconstruction (IBR is performed simultaneously with breast cancer resection. We explored indications, techniques, and outcomes of IBR to determine its feasibility, safety, and effectiveness. Material and Methods. We reviewed the available literature on one-stage direct-to-implant IBR, with or without acellular dermal matrix (ADM, synthetic mesh, or autologous fat grafting. We analyzed the indications, preoperative work-up, surgical technique, postoperative care, outcomes, and complications. Results. IBR is indicated for small-to-medium nonptotic breasts and contraindicated in patients who require or have undergone radiotherapy, due to unacceptably high complications rates. Only patients with thick, well-vascularized mastectomy flaps are IBR candidates. Expandable implants should be used for ptotic breasts, while anatomical shaped implants should be used to reconstruct small-to-medium nonptotic breasts. ADMs can be used to cover the implant during IBR and avoid muscle elevation, thereby minimizing postoperative pain. Flap necrosis, reoperation, and implant loss are more common with IBR than conventional two-staged reconstruction, but IBR has advantages such as lack of secondary surgery, faster recovery, and better quality of life. Conclusions. IBR has good outcomes and patient-satisfaction rates. With ADM use, a shift from conventional reconstruction to IBR has occurred. Drawbacks of IBR can be overcome by careful patient selection.

The Convolutional Visual Network for Identification and Reconstruction of NOvA Events

Energy Technology Data Exchange (ETDEWEB)

Psihas, Fernanda [Indiana U.

2017-11-22

In 2016 the NOvA experiment released results for the observation of oscillations in the vμ and ve channels as well as ve cross section measurements using neutrinos from Fermilab’s NuMI beam. These and other measurements in progress rely on the accurate identification and reconstruction of the neutrino flavor and energy recorded by our detectors. This presentation describes the first application of convolutional neural network technology for event identification and reconstruction in particle detectors like NOvA. The Convolutional Visual Network (CVN) Algorithm was developed for identification, categorization, and reconstruction of NOvA events. It increased the selection efficiency of the ve appearance signal by 40% and studies show potential impact to the vμ disappearance analysis.

The French nuclear sector. Situation and predictions 2018 - Sectoral and competitive analysis

International Nuclear Information System (INIS)

2017-01-01

This document comprises two reports. A first one, published and updated three times a year, and a second one which is a yearly publication. The first one, based on an analysis of market perspectives and of actor strategies, proposes a synthesis on the consequences of the evolution of the economic environment, on major trends noticed for the nuclear sector, and on predictable evolutions. It proposes the most recent data regarding the activities of more than 100 firms belonging to the sector (notably in terms of electric power production, of turnover for firms specialised in nuclear maintenance or in the fuel cycle). It highlights recent events for companies of the sector: takeovers, investments, restructuring, introduction of new products, and so on. It proposes a sector-based dashboard which contains all the critical figures useful to analyse the sector situation (activity determining factors, key figures for the sector and its environment). The annual report proposes a general presentation of the sector (determining factors of the activity, operated nuclear plants in the world, nuclear power production in the world, uranium production and consumption in the world, maintenance and improvement expenses on nuclear plants, electric power consumption and shares in power generation by different sources in France), an analysis of the evolution of the sector activity (trends, indicators, financial performance of actors in the maintenance of nuclear plants), an overview of important issues for the profession (growth issue despite the maturity of the French market, implications of intensification of foreign competition, of higher safety requirements, and of a decrease of nuclear energy profitability), and an analysis of the sector economic structure (turnovers, personnel, position of France among world exporters, equipment export structure, key figures for nuclear maintenance). The last part proposes presentations of 20 French actors and data and information sheets for 10

Index of Real Sector Returns as Price Benchmarking for Islamic Banking Products

Directory of Open Access Journals (Sweden)

Researchers of Islamic Banking Department

2012-01-01

Full Text Available Objective – Islamic Banking is closely related to the real sector. Then, its operation should reflect the real sector which is expected to contribute to the sustainable economic growth. Nevertheless, Islamic banks are still benchmarking the price of their products (profit sharing and sales on interest rate. This is as an implication of the implementation of the dual banking system. Moreover, the small portion of Islamic banking compared to the total national banks causes the competitiveness of Islamic banking product in terms of pricing has a high correlation with the interest rate of conventional counterpart. This phenomenon indicates the need to find.Method – This research employed library research method since this paper relies on secondary data by thoroughly reviewing the most relevant literature. The paper attempt to propose a pricing indicator which is based on the real sector activities as the root of Islamic banking operations.Result – Theoretically, this indicator can reflect the real rate of return of every industry sector. In addition, it can help Bank Indonesia to monitor the real sector performance and analyze the possible gap between real sector activities and financial sector. Furthermore, when the benchmark of real rate of real sector return is available, the return index of Islamic banking reflecting the profit sharing performance of the whole Islamic banking industry can be formulated. This concept is different with other indexes which are corresponding to the price of financial assets.Conclusion – In general, return index of real sector as a reference for Islamic banking product pricing is expected to define the way of non-interest return analysis, to calculate the non-interest return of selected sectors that becomes the focus of analysis using Cash Recovery Rates (CRR, forming an index of industry by sector in the second stage, by doing a certain weighting of those companies, to analyze the relationship between macro

Coordinate reconstruction using box reconstruction and projection of X-ray photo

International Nuclear Information System (INIS)

Achmad Suntoro

2011-01-01

Some mathematical formula have been derived for a process of reconstruction to define the coordinate of any point relative to a pre set coordinate system. The process of reconstruction uses a reconstruction box in which each edge's length of the box is known, each top-bottom face and left-right face of the box having a cross marker, and the top face and the right face of the box as plane projections by X-ray source in perspective projection -system. Using the data of the two X-ray projection images, any point inside the reconstruction box, as long as its projection is recorded in the two photos, will be determined its coordinate relative to the midpoint of the reconstruction box as the central point coordinates. (author)

The influence of image reconstruction algorithms on linear thorax EIT image analysis of ventilation

International Nuclear Information System (INIS)

Zhao, Zhanqi; Möller, Knut; Frerichs, Inéz; Pulletz, Sven; Müller-Lisse, Ullrich

2014-01-01

Analysis methods of electrical impedance tomography (EIT) images based on different reconstruction algorithms were examined. EIT measurements were performed on eight mechanically ventilated patients with acute respiratory distress syndrome. A maneuver with step increase of airway pressure was performed. EIT raw data were reconstructed offline with (1) filtered back-projection (BP); (2) the Dräger algorithm based on linearized Newton–Raphson (DR); (3) the GREIT (Graz consensus reconstruction algorithm for EIT) reconstruction algorithm with a circular forward model (GR C ) and (4) GREIT with individual thorax geometry (GR T ). Individual thorax contours were automatically determined from the routine computed tomography images. Five indices were calculated on the resulting EIT images respectively: (a) the ratio between tidal and deep inflation impedance changes; (b) tidal impedance changes in the right and left lungs; (c) center of gravity; (d) the global inhomogeneity index and (e) ventilation delay at mid-dorsal regions. No significant differences were found in all examined indices among the four reconstruction algorithms (p > 0.2, Kruskal–Wallis test). The examined algorithms used for EIT image reconstruction do not influence the selected indices derived from the EIT image analysis. Indices that validated for images with one reconstruction algorithm are also valid for other reconstruction algorithms. (paper)

The influence of image reconstruction algorithms on linear thorax EIT image analysis of ventilation.

Science.gov (United States)

Zhao, Zhanqi; Frerichs, Inéz; Pulletz, Sven; Müller-Lisse, Ullrich; Möller, Knut

2014-06-01

Analysis methods of electrical impedance tomography (EIT) images based on different reconstruction algorithms were examined. EIT measurements were performed on eight mechanically ventilated patients with acute respiratory distress syndrome. A maneuver with step increase of airway pressure was performed. EIT raw data were reconstructed offline with (1) filtered back-projection (BP); (2) the Dräger algorithm based on linearized Newton-Raphson (DR); (3) the GREIT (Graz consensus reconstruction algorithm for EIT) reconstruction algorithm with a circular forward model (GR(C)) and (4) GREIT with individual thorax geometry (GR(T)). Individual thorax contours were automatically determined from the routine computed tomography images. Five indices were calculated on the resulting EIT images respectively: (a) the ratio between tidal and deep inflation impedance changes; (b) tidal impedance changes in the right and left lungs; (c) center of gravity; (d) the global inhomogeneity index and (e) ventilation delay at mid-dorsal regions. No significant differences were found in all examined indices among the four reconstruction algorithms (p > 0.2, Kruskal-Wallis test). The examined algorithms used for EIT image reconstruction do not influence the selected indices derived from the EIT image analysis. Indices that validated for images with one reconstruction algorithm are also valid for other reconstruction algorithms.

Modern principles of reconstructive surgery for advanced head and neck tumors

Science.gov (United States)

Kulbakin, D. E.; Choinzonov, E. L.; Mukhamedov, M. R.; Garbukov, E. U.; Shtin, V. I.; Havkin, N. M.; Vasilev, R. V.

2017-09-01

Background: Surgery remains the mainstay of treatment for head and neck cancer. Reconstruction after cancer surgery can help to restore both the appearance and function of the affected areas. Materials and methods: From 2008 to 2016, a total of 120 reconstructive surgeries were performed at the Department of Head and Neck Tumors of Tomsk Cancer Research Institute. The majority of patients had locally advanced cancer (T3 stage in 49 patients and T4 stage in 41 patients). The localizations of the defects requiring reconstruction were as follows: oral cavity—26 cases; tongue—24 cases; skin (including defects of lower lip)—12 cases; maxilla—14 cases; larynx and hypopharynx—12 cases; lips—6 cases, cheek—11 cases, and mandibulla—5 cases. Various free flaps (83%) and pedicle flaps (17%) were used for the reconstruction of the large defects following extirpation of head and neck malignant tumors. In 15 cases (13%), the implants from titanium and titanium nickelide (TiNi) were used to restore the supporting and skeletal functions of the reconstructed region. We used 3D model of the patient's skull for a more precise planning of the reconstruction of maxillofacial bone defects. Results: Good functional results were achieved in most cases. Full flap necrosis was observed in 12 cases (10%). Fibular flap necroses were noted in 8 cases (7%). Conclusions: Single-stage reconstructions of the lost structures after tumor resection significantly improve survival of head and neck cancer patients without causing significant functional and aesthetic damage, as well as contribute to quick rehabilitation of these patients and improvement of their social status. To reduce postoperative complications after reconstructive surgery, it is necessary to carefully select the appropriate reconstructive implant materials.

Selectivity Skills of Mutual Fund Managers in India: An Analysis

Directory of Open Access Journals (Sweden)

Bilal Ahmad Pandow

2016-12-01

Full Text Available Stock selection is the nucleus in the investment management process. It involves identifying and selecting undervalued securities which among other things requires the successful forecasting of the company specific events or an ability to predict the general behavior of security prices in the future. If the fund manager is able to identify and select the undervalued securities for the portfolio, then it will be possible for the fund manager to increase the returns of the schemes and vice versa. In practice fund managers are expected to earn superior returns for unit holders consistently as being professionals therefore possess superior skills to collect and analyze the data with the purpose to select the right type of securities for the portfolio. The present work is based on the review of tens of studies both foreign and Indian studies relating to mutual funds. The mutual fund industry in India consists of public sector, private sector and foreign funds. All the three sectors were studied to compare the selectivity and timing performance on the basis of sponsorship of funds. However, from these only active funds belongings to Growth, Income, Balanced and Tax-Saving Schemes were selected for the study. In this paper stock selectivity skills of sample fund managers were tested by using Jensen’s Alpha and Fama’s net selectivity measure.

Implications Of Technology Learning in Energy-Economy Models of the Transport Sector

International Nuclear Information System (INIS)

Krzyzanowski, D.A.; Kypreos, S.; Gutzwiller, L.; Barreto, L.

2005-07-01

Diffusion of hydrogen fuelled fuel cell vehicles is foreseen by many as the future for the transportation sector. However, high technological advancement over conventional power trains and improved performance of fuel cells as technology, do not guarantee that fuel cell vehicles will actually play a significant role in the transportation sector in the coming decades. In this study, an attempt is made to evaluate selected factors, which may have a stimulating or hindering effect on the market diffusion of fuel cell vehicles. The analysis evaluates the influence of technological learning of fuel cell stack components, prices of fuel cells, hydrogen and crude oil based fuels as well as governmental initiatives to penalise for CO 2 emissions coming from the transportation sector, on market diffusion of fuel cell vehicles in the coming years. (author)

Implications Of Technology Learning in Energy-Economy Models of the Transport Sector

Energy Technology Data Exchange (ETDEWEB)

Krzyzanowski, D.A.; Kypreos, S.; Gutzwiller, L.; Barreto, L

2005-07-01

Diffusion of hydrogen fuelled fuel cell vehicles is foreseen by many as the future for the transportation sector. However, high technological advancement over conventional power trains and improved performance of fuel cells as technology, do not guarantee that fuel cell vehicles will actually play a significant role in the transportation sector in the coming decades. In this study, an attempt is made to evaluate selected factors, which may have a stimulating or hindering effect on the market diffusion of fuel cell vehicles. The analysis evaluates the influence of technological learning of fuel cell stack components, prices of fuel cells, hydrogen and crude oil based fuels as well as governmental initiatives to penalise for CO{sub 2} emissions coming from the transportation sector, on market diffusion of fuel cell vehicles in the coming years. (author)

Segmentation-DrivenTomographic Reconstruction

DEFF Research Database (Denmark)

Kongskov, Rasmus Dalgas

such that the segmentation subsequently can be carried out by use of a simple segmentation method, for instance just a thresholding method. We tested the advantages of going from a two-stage reconstruction method to a one stage segmentation-driven reconstruction method for the phase contrast tomography reconstruction......The tomographic reconstruction problem is concerned with creating a model of the interior of an object from some measured data, typically projections of the object. After reconstructing an object it is often desired to segment it, either automatically or manually. For computed tomography (CT...

Some comments on reconstructing the historical climate of California, USA

International Nuclear Information System (INIS)

Mock, C.J.

2006-01-01

This paper describes some examples of historical climate reconstruction pertaining to California, USA, focusing mostly on winter climate given the expected strongest teleconnection signals for this season. Climatic data consist of early instrumental data from the US Army Surgeon General at military forts, observers of the Smithsonian Institution, the Signal Service, and some private observers. Documentary (non-instrumental) data were also used in assessing extreme events. Original daily records of these data were carefully assessed for discontinuities from examining diurnal temperature ranges and daily precipitation amounts. The climatic reconstructions conducted were as follows: 1) winter precipitation time series for selected locations since 1850, particularly for Sacramento and San Francisco, 2) winter temperature time series for selected locations since 1850, and 3) analyses of an extreme flooding event in January 1862 and a landfalling tropical cyclone of September 1939. Results indicate distinctive wetter winters for central and northern California in the late nineteenth century, and some of these wetter years correspond to well-known very strong El Ni no events. Connections to weaker El Nino and La Nina events, however, are not clearly evident. The flood of January 1862 is considered unprecedented when compared to other floods of the last 130 years. The reconstruction of a landfalling tropical cyclone for September 1939 near Los Angeles suggests its intensity at just below hurricane strength

Impact of HIV/AIDS to the tourism sector human resources: Case of selected hotels in Harare

Directory of Open Access Journals (Sweden)

Zengeni, D.M.F.

2013-12-01

Full Text Available The study investigated the impacts of HIV/AIDS on human resources in the tourism sector in Zimbabwe’s capital city, Harare. Harare Hotels were used as a case study establishing how HIV/AIDS affects the workforce in the tourism sector and the consequent effects on service delivery. Visitors’ inflows into Zimbabwe have declined since the year 2000. To understand the reasons and related aspects, data was collected by way of questionnaires which were administered to 9 human resources managers and 9 marketing managers from hotels in Harare during the period of 2008 and 2009. These questionnaires were individually distributed and collected which resulted in 100% return rate. Human resources managers were used because they are involved directly with the social welfare of employees and marketing managers were used because they work in customer care and analyse service delivery. The findings of the study were that HIV/AIDS impact negatively to the hotel sector through deaths of skilled members. This was said to consequently leading to the reduction in service delivery and inconsistence in service delivery. Besides losing skilled members through death it was also discovered that the hotels were now moving HIV/AIDS effected victims to the back of the house to minimise their contact with guests. It was also discovered that hotels were using lot of funds to implement mitigation measures.

Decree of the Czech Labor Safety Office No. 263/1991 amending the Decree No. 76/1989 on ensuring safety of technical facilities in the nuclear power sector

International Nuclear Information System (INIS)

1995-01-01

Some provisions of the Decree of the Czech Labor Safety Office No. 76/1989 on ensuring safety of technical facilities in the nuclear power sector are amended, particularly in the field of construction activities, assembling, reconstruction and repair of nuclear power facilities. The Decree entered into force on 28 June 1991. (J.B.)

Public Sector Expatriate Managers:

DEFF Research Database (Denmark)

Fenner, Charles, R., Jr.; Selmer, Jan

2008-01-01

Although public sector expatriates are becoming increasingly common, research on them is very limited. There is reason to believe that the situation for expatriates from the public sector may be different than for those from the private sector. This study investigated U.S. Department of Defense a...

Online selection of short-lived particles on many-core computer architectures in the CBM experiment at FAIR

International Nuclear Information System (INIS)

Zyzak, Maksym

2016-01-01

Modern experiments in heavy ion collisions operate with huge data rates that can not be fully stored on the currently available storage devices. Therefore the data flow should be reduced by selecting those collisions that potentially carry the information of the physics interest. The future CBM experiment will have no simple criteria for selecting such collisions and requires the full online reconstruction of the collision topology including reconstruction of short-lived particles. In this work the KF Particle Finder package for online reconstruction and selection of short-lived particles is proposed and developed. It reconstructs more than 70 decays, covering signals from all the physics cases of the CBM experiment: strange particles, strange resonances, hypernuclei, low mass vector mesons, charmonium, and open-charm particles. The package is based on the Kalman filter method providing a full set of the particle parameters together with their errors including position, momentum, mass, energy, lifetime, etc. It shows a high quality of the reconstructed particles, high efficiencies, and high signal to background ratios. The KF Particle Finder is extremely fast for achieving the reconstruction speed of 1.5 ms per minimum-bias AuAu collision at 25 AGeV beam energy on single CPU core. It is fully vectorized and parallelized and shows a strong linear scalability on the many-core architectures of up to 80 cores. It also scales within the First Level Event Selection package on the many-core clusters up to 3200 cores. The developed KF Particle Finder package is a universal platform for short- lived particle reconstruction, physics analysis and online selection.

Online selection of short-lived particles on many-core computer architectures in the CBM experiment at FAIR

Energy Technology Data Exchange (ETDEWEB)

Zyzak, Maksym

2016-07-07

Modern experiments in heavy ion collisions operate with huge data rates that can not be fully stored on the currently available storage devices. Therefore the data flow should be reduced by selecting those collisions that potentially carry the information of the physics interest. The future CBM experiment will have no simple criteria for selecting such collisions and requires the full online reconstruction of the collision topology including reconstruction of short-lived particles. In this work the KF Particle Finder package for online reconstruction and selection of short-lived particles is proposed and developed. It reconstructs more than 70 decays, covering signals from all the physics cases of the CBM experiment: strange particles, strange resonances, hypernuclei, low mass vector mesons, charmonium, and open-charm particles. The package is based on the Kalman filter method providing a full set of the particle parameters together with their errors including position, momentum, mass, energy, lifetime, etc. It shows a high quality of the reconstructed particles, high efficiencies, and high signal to background ratios. The KF Particle Finder is extremely fast for achieving the reconstruction speed of 1.5 ms per minimum-bias AuAu collision at 25 AGeV beam energy on single CPU core. It is fully vectorized and parallelized and shows a strong linear scalability on the many-core architectures of up to 80 cores. It also scales within the First Level Event Selection package on the many-core clusters up to 3200 cores. The developed KF Particle Finder package is a universal platform for short- lived particle reconstruction, physics analysis and online selection.

One step linear reconstruction method for continuous wave diffuse optical tomography

Science.gov (United States)

Ukhrowiyah, N.; Yasin, M.

2017-09-01

The method one step linear reconstruction method for continuous wave diffuse optical tomography is proposed and demonstrated for polyvinyl chloride based material and breast phantom. Approximation which used in this method is selecting regulation coefficient and evaluating the difference between two states that corresponding to the data acquired without and with a change in optical properties. This method is used to recovery of optical parameters from measured boundary data of light propagation in the object. The research is demonstrated by simulation and experimental data. Numerical object is used to produce simulation data. Chloride based material and breast phantom sample is used to produce experimental data. Comparisons of results between experiment and simulation data are conducted to validate the proposed method. The results of the reconstruction image which is produced by the one step linear reconstruction method show that the image reconstruction almost same as the original object. This approach provides a means of imaging that is sensitive to changes in optical properties, which may be particularly useful for functional imaging used continuous wave diffuse optical tomography of early diagnosis of breast cancer.

Exploring corruption in the South African health sector.

Science.gov (United States)

Rispel, Laetitia C; de Jager, Pieter; Fonn, Sharon

2016-03-01

Recent scholarly attention has focused on weak governance and the negative effects of corruption on the provision of health services. Employing agency theory, this article discusses corruption in the South African health sector. We used a combination of research methods and triangulated data from three sources: Auditor-General of South Africa reports for each province covering a 9-year period; 13 semi-structured interviews with health sector key informants and a content analysis of print media reports covering a 3-year period. Findings from the Auditor-General reports showed a worsening trend in audit outcomes with marked variation across the nine provinces. Key-informants indicated that corruption has a negative effect on patient care and the morale of healthcare workers. The majority of the print media reports on corruption concerned the public health sector (63%) and involved provincial health departments (45%). Characteristics and complexity of the public health sector may increase its vulnerability to corruption, but the private-public binary constitutes a false dichotomy as corruption often involves agents from both sectors. Notwithstanding the lack of global validated indicators to measure corruption, our findings suggest that corruption is a problem in the South African healthcare sector. Corruption is influenced by adverse agent selection, lack of mechanisms to detect corruption and a failure to sanction those involved in corrupt activities. We conclude that appropriate legislation is a necessary, but not sufficient intervention to reduce corruption. We propose that mechanisms to reduce corruption must include the political will to run corruption-free health services, effective government to enforce laws, appropriate systems, and citizen involvement and advocacy to hold public officials accountable. Importantly, the institutionalization of a functional bureaucracy and public servants with the right skills, competencies, ethics and value systems and whose

Theoretical Analysis of Penalized Maximum-Likelihood Patlak Parametric Image Reconstruction in Dynamic PET for Lesion Detection.

Science.gov (United States)

Yang, Li; Wang, Guobao; Qi, Jinyi

2016-04-01

Detecting cancerous lesions is a major clinical application of emission tomography. In a previous work, we studied penalized maximum-likelihood (PML) image reconstruction for lesion detection in static PET. Here we extend our theoretical analysis of static PET reconstruction to dynamic PET. We study both the conventional indirect reconstruction and direct reconstruction for Patlak parametric image estimation. In indirect reconstruction, Patlak parametric images are generated by first reconstructing a sequence of dynamic PET images, and then performing Patlak analysis on the time activity curves (TACs) pixel-by-pixel. In direct reconstruction, Patlak parametric images are estimated directly from raw sinogram data by incorporating the Patlak model into the image reconstruction procedure. PML reconstruction is used in both the indirect and direct reconstruction methods. We use a channelized Hotelling observer (CHO) to assess lesion detectability in Patlak parametric images. Simplified expressions for evaluating the lesion detectability have been derived and applied to the selection of the regularization parameter value to maximize detection performance. The proposed method is validated using computer-based Monte Carlo simulations. Good agreements between the theoretical predictions and the Monte Carlo results are observed. Both theoretical predictions and Monte Carlo simulation results show the benefit of the indirect and direct methods under optimized regularization parameters in dynamic PET reconstruction for lesion detection, when compared with the conventional static PET reconstruction.

Magni: A Python Package for Compressive Sampling and Reconstruction of Atomic Force Microscopy Images

Directory of Open Access Journals (Sweden)

Christian Schou Oxvig

2014-10-01

Full Text Available Magni is an open source Python package that embraces compressed sensing and Atomic Force Microscopy (AFM imaging techniques. It provides AFM-specific functionality for undersampling and reconstructing images from AFM equipment and thereby accelerating the acquisition of AFM images. Magni also provides researchers in compressed sensing with a selection of algorithms for reconstructing undersampled general images, and offers a consistent and rigorous way to efficiently evaluate the researchers own developed reconstruction algorithms in terms of phase transitions. The package also serves as a convenient platform for researchers in compressed sensing aiming at obtaining a high degree of reproducibility of their research.

SU-E-T-362: Automatic Catheter Reconstruction of Flap Applicators in HDR Surface Brachytherapy

International Nuclear Information System (INIS)

Buzurovic, I; Devlin, P; Hansen, J; O'Farrell, D; Bhagwat, M; Friesen, S; Damato, A; Lewis, J; Cormack, R

2014-01-01

Purpose: Catheter reconstruction is crucial for the accurate delivery of radiation dose in HDR brachytherapy. The process becomes complicated and time-consuming for large superficial clinical targets with a complex topology. A novel method for the automatic catheter reconstruction of flap applicators is proposed in this study. Methods: We have developed a program package capable of image manipulation, using C++class libraries of The-Visualization-Toolkit(VTK) software system. The workflow for automatic catheter reconstruction is: a)an anchor point is placed in 3D or in the axial view of the first slice at the tip of the first, last and middle points for the curved surface; b)similar points are placed on the last slice of the image set; c)the surface detection algorithm automatically registers the points to the images and applies the surface reconstruction filter; d)then a structured grid surface is generated through the center of the treatment catheters placed at a distance of 5mm from the patient's skin. As a result, a mesh-style plane is generated with the reconstructed catheters placed 10mm apart. To demonstrate automatic catheter reconstruction, we used CT images of patients diagnosed with cutaneous T-cell-lymphoma and imaged with Freiburg-Flap-Applicators (Nucletron™-Elekta, Netherlands). The coordinates for each catheter were generated and compared to the control points selected during the manual reconstruction for 16catheters and 368control point Results: The variation of the catheter tip positions between the automatically and manually reconstructed catheters was 0.17mm(SD=0.23mm). The position difference between the manually selected catheter control points and the corresponding points obtained automatically was 0.17mm in the x-direction (SD=0.23mm), 0.13mm in the y-direction (SD=0.22mm), and 0.14mm in the z-direction (SD=0.24mm). Conclusion: This study shows the feasibility of the automatic catheter reconstruction of flap applicators with a high

Applying a private sector capitation model to the management of type 2 diabetes in the South African public sector: a cost-effectiveness analysis.

Science.gov (United States)

Volmink, Heinrich C; Bertram, Melanie Y; Jina, Ruxana; Wade, Alisha N; Hofman, Karen J

2014-09-30

Diabetes mellitus contributes substantially to the non-communicable disease burden in South Africa. The proposed National Health Insurance system provides an opportunity to consider the development of a cost-effective capitation model of care for patients with type 2 diabetes. The objective of the study was to determine the potential cost-effectiveness of adapting a private sector diabetes management programme (DMP) to the South African public sector. Cost-effectiveness analysis was undertaken with a public sector model of the DMP as the intervention and a usual practice model as the comparator. Probabilistic modelling was utilized for incremental cost-effectiveness ratio analysis with life years gained selected as the outcome. Secondary data were used to design the model while cost information was obtained from various sources, taking into account public sector billing. Modelling found an incremental cost-effectiveness ratio (ICER) of ZAR 8 356 (USD 1018) per life year gained (LYG) for the DMP against the usual practice model. This fell substantially below the Willingness-to-Pay threshold with bootstrapping analysis. Furthermore, a national implementation of the intervention could potentially result in an estimated cumulative gain of 96 997 years of life (95% CI 71 073 years - 113 994 years). Probabilistic modelling found the capitation intervention to be cost-effective, with an ICER of ZAR 8 356 (USD 1018) per LYG. Piloting the service within the public sector is recommended as an initial step, as this would provide data for more accurate economic evaluation, and would also allow for qualitative analysis of the programme.

Vaginal reconstruction

International Nuclear Information System (INIS)

Lesavoy, M.A.

1985-01-01

Vaginal reconstruction can be an uncomplicated and straightforward procedure when attention to detail is maintained. The Abbe-McIndoe procedure of lining the neovaginal canal with split-thickness skin grafts has become standard. The use of the inflatable Heyer-Schulte vaginal stent provides comfort to the patient and ease to the surgeon in maintaining approximation of the skin graft. For large vaginal and perineal defects, myocutaneous flaps such as the gracilis island have been extremely useful for correction of radiation-damaged tissue of the perineum or for the reconstruction of large ablative defects. Minimal morbidity and scarring ensue because the donor site can be closed primarily. With all vaginal reconstruction, a compliant patient is a necessity. The patient must wear a vaginal obturator for a minimum of 3 to 6 months postoperatively and is encouraged to use intercourse as an excellent obturator. In general, vaginal reconstruction can be an extremely gratifying procedure for both the functional and emotional well-being of patients

An agent-based information management model of the Chinese pig sector

NARCIS (Netherlands)

Osinga, S.A.; Kramer, M.R.; Hofstede, G.J.; Roozmand, O.; Beulens, A.J.M.

2010-01-01

This paper investigates the effect of a selected top-down measure (what-if scenario) on actual agent behaviour and total system behaviour by means of an agent-based simulation model, when agents’ behaviour cannot fully be managed because the agents are autonomous. The Chinese pork sector serves as

Bayes reconstruction of missing teeth

DEFF Research Database (Denmark)

Sporring, Jon; Jensen, Katrine Hommelhoff

2008-01-01

contains two major parts: A statistical model of a selection of tooth shapes and a reconstruction of missing data. We use a training set consisting of 3D scans of dental cast models obtained with a laser scanner, and we have build a model of the shape variability of the teeth, their neighbors...... or equivalently noise elimination and for data analysis. However for small sets of high dimensional data, the log-likelihood estimator for the covariance matrix is often far from convergence, and therefore reliable models must be obtained by use of prior information. We propose a natural and intrinsic...

Noncontextuality with Marginal Selectivity in Reconstructing Mental Architectures

Directory of Open Access Journals (Sweden)

Ru eZhang

2015-06-01

Full Text Available We present a general theory of series-parallel mental architectures with selectively influenced stochastically non-independent components. A mental architecture is a hypothetical network of processes aimed at performing a task, of which we only observe the overall time it takes under variable parameters of the task. It is usually assumed that the network contains several processes selectively influenced by different experimental factors, and then the question is asked as to how these processes are arranged within the network, e.g., whether they are concurrent or sequential. One way of doing this is to consider the distribution functions for the overall processing time and compute certain linear combinations thereof (interaction contrasts. The theory of selective influences in psychology can be viewed as a special application of the interdisciplinary theory of (noncontextuality having its origins and main applications in quantum theory. In particular, lack of contextuality is equivalent to the existence of a hidden random entity of which all the random variables in play are functions. Consequently, for any given value of this common random entity, the processing times and their compositions (minima, maxima, or sums become deterministic quantities. These quantities, in turn, can be treated as random variables with (shifted Heaviside distribution functions, for which one can easily compute various linear combinations across different treatments, including interaction contrasts. This mathematical fact leads to a simple method, more general than the previously used ones, to investigate and characterize the interaction contrast for different types of series-parallel architectures.

Multi-sectoral action for child safety-a European study exploring implicated sectors.

Science.gov (United States)

Scholtes, Beatrice; Schröder-Bäck, Peter; Förster, Katharina; MacKay, Morag; Vincenten, Joanne; Brand, Helmut

2017-06-01

Injury to children in Europe, resulting in both death and disability, constitutes a significant burden on individuals, families and society. Inequalities between high and low-income countries are growing. The World Health Organisation Health 2020 strategy calls for inter-sectoral collaboration to address injury in Europe and advocates the whole of government and whole of society approaches to wicked problems. In this study we explore which sectors (e.g. health, transport, education) are relevant for four domains of child safety (intentional injury, water, road and home safety). We used the organigraph methodology, originally developed to demonstrate how organizations work, to describe the governance of child safety interventions. Members of the European Child Safety Alliance, working in the field of child safety in 24 European countries, drew organigraphs of evidence-based interventions. They included the different actors involved and the processes between them. We analyzed the organigraphs by counting the actors presented and categorizing them into sectors using a pre-defined analysis framework. We received 44 organigraphs from participants in 24 countries. Twenty-seven sectors were identified across the four domains. Nine of the 27 identified sectors were classified as 'core sectors' (education, health, home affairs, justice, media, recreation, research, social/welfare services and consumers). This study reveals the multi-sectoral nature of child safety in practice. It provides information for stakeholders working in child safety to help them implement inter-sectoral child safety interventions taking a whole-of-government and whole-of-society approach to health governance. © The Author 2017. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Investigating the effectiveness of response strategies for vulnerabilities to corruption in the chinese public construction sector.

Science.gov (United States)

Shan, Ming; Chan, Albert P C; Le, Yun; Hu, Yi

2015-06-01

Response strategy is a key for preventing widespread corruption vulnerabilities in the public construction sector. Although several studies have been devoted to this area, the effectiveness of response strategies has seldom been evaluated in China. This study aims to fill this gap by investigating the effectiveness of response strategies for corruption vulnerabilities through a survey in the Chinese public construction sector. Survey data obtained from selected experts involved in the Chinese public construction sector were analyzed by factor analysis and partial least squares-structural equation modeling. Analysis results showed that four response strategies of leadership, rules and regulations, training, and sanctions, only achieved an acceptable level in preventing corruption vulnerabilities in the Chinese public construction sector. This study contributes to knowledge by improving the understanding of the effectiveness of response strategies for corruption vulnerabilities in the public construction sector of developing countries.

eLearning Attitudes in Botswana’s Private Sector

OpenAIRE

Nleya , Paul ,

2011-01-01

International audience; The study investigated eLearning attitudes in Botswana’s private sector. Selected companies in Gaborone, (Botswana) served as the unit of analysis. The study used a multi-pronged approach for data collection. The results show positive attitudes towards eLearning. However, current organizational policy did not accommodate training via eLearning. The results also suggest that eLearning counters threat of national and international private seizure of employee markets. All...

Handbook of the energy sector 1992-1997; 1. ed.; Prontuario del sector de energia 1992-1997

Energy Technology Data Exchange (ETDEWEB)

Garcia Fuentes, Adrian; Ylizaliturri Ridriguez, Jose Carlos; Aguilar Alejandre, Vicente; Gomez Chiu, Rebeca [Secretaria de Energia, Mexico, D. F. (Mexico)

1998-12-31

The planning of the energy sector requires a detailed knowledge of the relations that exist among the International markets of energy and the position of Mexico with respect to these. The Handbook of the energy sector 1992-1997 analyzes the tendency of the International markets of energy and the relative importance of the countries in relationship to its resources, production volumes, energy demand, fuel prices and foreign trade. It allows to know how and to what extent the energy sector has responded to the new economic conditions of the country and to the global tendencies, presenting statistics of easy consultation, updated information at International level on the reserves, installed capacity, production, consumption, prices and commerce of the main energy sources, and of the position of Mexico within this context. The information consists of seven chapters: First, analyzes the world-wide balance of energy, detailing the consumption of primary energy by region and source; in the second, the main crude petroleum statistics are analyzed, of selected countries; the third analyzes the refined products of petroleum, the fourth analyzes the world-wide natural gas reserves; the fifth the world-wide coal reserves and the sixth, the installed capacity of electricity generation in several countries. [Espanol] La planeacion del sector de energia requiere un conocimiento detallado de las relaciones que existen entre los mercados internacionales de energia y la posicion de Mexico con respecto a estos. El Prontuario del sector de energia 1992-1997 analiza la tendencia de los mercados internacionales de energia y la importancia relativa de los paises en relacion con sus recursos, volumenes de produccion, demanda de energia, precios de combustibles y comercio exterior. Permite conocer como y en que medida el sector de energia ha respondido a las nuevas condiciones economicas del pais y a las tendencias globales, al presentar estadisticas de facil consulta, de informacion

Exact Reconstruction From Uniformly Attenuated Helical Cone-Beam Projections in SPECT

International Nuclear Information System (INIS)

Gullberg, Grant T.; Huang, Qiu; You, Jiangsheng; Zeng, Gengsheng L.

2008-01-01

In recent years the development of cone-beam reconstruction algorithms has been an active research area in x-ray computed tomography (CT), and significant progress has been made in the advancement of algorithms. Theoretically exact and computationally efficient analytical algorithms can be found in the literature. However, in single photon emission computed tomography (SPECT), published cone-beam reconstruction algorithms are either approximate or involve iterative methods. The SPECT reconstruction problem is more complicated due to degradations in the imaging detection process, one of which is the effect of attenuation of gamma ray photons. Attenuation should be compensated for to obtain quantitative results. In this paper, an analytical reconstruction algorithm for uniformly attenuated cone-beam projection data is presented for SPECT imaging. The algorithm adopts the DBH method, a procedure consisting of differentiation and backprojection followed by a finite inverse cosh-weighted Hilbert transform. The significance of the proposed approach is that a selected region of interest can be reconstructed even with a detector with a reduced field of view. The algorithm is designed for a general trajectory. However, to validate the algorithm, a numerical study was performed using a helical trajectory. The implementation is efficient and the simulation result is promising

Torus sector handling system

International Nuclear Information System (INIS)

Grisham, D.L.

1981-01-01

A remote handling system is proposed for moving a torus sector of the accelerator from under the cryostat to a point where it can be handled by a crane and for the reverse process for a new sector. Equipment recommendations are presented, as well as possible alignment schemes. Some general comments about future remote-handling methods and the present capabilities of existing systems will also be included. The specific task to be addressed is the removal and replacement of a 425 to 450 ton torus sector. This requires a horizontal movement of approx. 10 m from a normal operating position to a point where its further transport can be accomplished by more conventional means (crane or floor transporter). The same horizontal movement is required for reinstallation, but a positional tolerance of 2 cm is required to allow reasonable fit-up for the vacuum seal from the radial frames to the torus sector. Since the sectors are not only heavy but rather tall and narrow, the transport system must provide a safe, stable, and repeatable method fo sector movement. This limited study indicates that the LAMPF-based method of transporting torus sectors offers a proven method of moving heavy items. In addition, the present state of the art in remote equipment is adequate for FED maintenance

Using Spherical-Harmonics Expansions for Optics Surface Reconstruction from Gradients

Directory of Open Access Journals (Sweden)

Juan Manuel Solano-Altamirano

2017-11-01

Full Text Available In this paper, we propose a new algorithm to reconstruct optics surfaces (aka wavefronts from gradients, defined on a circular domain, by means of the Spherical Harmonics. The experimental results indicate that this algorithm renders the same accuracy, compared to the reconstruction based on classical Zernike polynomials, using a smaller number of polynomial terms, which potentially speeds up the wavefront reconstruction. Additionally, we provide an open-source C++ library, released under the terms of the GNU General Public License version 2 (GPLv2, wherein several polynomial sets are coded. Therefore, this library constitutes a robust software alternative for wavefront reconstruction in a high energy laser field, optical surface reconstruction, and, more generally, in surface reconstruction from gradients. The library is a candidate for being integrated in control systems for optical devices, or similarly to be used in ad hoc simulations. Moreover, it has been developed with flexibility in mind, and, as such, the implementation includes the following features: (i a mock-up generator of various incident wavefronts, intended to simulate the wavefronts commonly encountered in the field of high-energy lasers production; (ii runtime selection of the library in charge of performing the algebraic computations; (iii a profiling mechanism to measure and compare the performance of different steps of the algorithms and/or third-party linear algebra libraries. Finally, the library can be easily extended to include additional dependencies, such as porting the algebraic operations to specific architectures, in order to exploit hardware acceleration features.

Breast Reconstruction After Mastectomy

Science.gov (United States)

... Cancer Prevention Genetics of Breast & Gynecologic Cancers Breast Cancer Screening Research Breast Reconstruction After Mastectomy On This Page What is breast reconstruction? How do surgeons use implants to reconstruct a woman’s breast? How do surgeons ...

Industrial innovation and intra sectoral and inter sectoral technology diffusion; Innovacion industrial y difusion tecnological intrasectorial e intersectorial

Energy Technology Data Exchange (ETDEWEB)

Serrano Domingo, G.; Cabrera Borras, B.; Requena Silvente, F.

2012-07-01

This paper examines whether sectoral backward and forward linkages can generate positive externalises in sectoral innovation through diffusion of technological knowledge, both across countries within a sector or across sectors within a country. Using a sample of 14 OECD countries and 12 sectors over the period 1995-2005 we find that forward linkages enhance sectoral innovation. Intra sectoral slipovers are important among sectors and countries with low-to-medium R an D intensity while inter sectoral slipovers have a major impact on sectors with high R and D intensity. (Author)

KNOWLEDGE SHARING CULTURE: A STUDY ON THE OMANI COMMERCIAL BANKING SECTOR

Directory of Open Access Journals (Sweden)

Tareq Alhousary

2016-07-01

Full Text Available The banking sector is one that is characterized by the high need of management experience and agility to cope with the fast-paced competition raised by the international alliances in this business. The Omani banking sector in general is one of the infrastructure businesses that has essential role in the realization of the Omani Renaissance. This sector has achieved remarkable improvements in terms of the cutting edge technology it has adopted. To reach the Omani aspiration in its economic renaissance, various soft issues beyond technology are to be tuned well to reach of the required competitiveness. Softer issues such as knowledge management are one of the critical soft issues that forms the aim of the study presented, and in particular, to explore how organizational knowledge is shared and nurtured in the sector. Questionnaire-based survey and semi-structured interviews were used to collect both qualitative and quantitative data from over 300 hundred banking employees from five different banks. Clustered sampling was used for the survey and interviews were selective; targeting senior administrator in the sector. The qualitative data was analyzed using SPSS descriptive statistics and thematic analysis was used for analyzing the qualitative data. The study found that the sector has built a competitive cutting edge banking technology over relatively short span of time; however there is still vast room for improvement at the administrative side of the work. Among the recommendations, is having a conscious systematic effort by the sector administration to build physical and virtual facilities for exchanging knowledge among its employees and to provide work stability and an effective reward system for knowledge sharing behavior.

A study of transverse image reconstruction with digital subtraction angiography

International Nuclear Information System (INIS)

Sakamoto, Kiyoshi; Kotoura, Noriko; Terasawa, Yuuji; Oda, Masahiko; Gotou, Hiroshi; Nasada, Toshiya; Tanooka, Masao

1995-01-01

For digital subtraction angiography (DSA) with C-type equipment, it is possible to radiate an X-ray during rotation and to collect data at different angular settings. We tried to reconstruct transverse image from data obtained by scanning DSA images at different angular settings. 88 projection data were obtained by rotating the object at 180deg during radiation. Reconstruction was made using the convolution method with pixel value distribution for each projection. Similarly, the image quality of the reconstructed images were compared with the unsubtracted and subtracted ones. In case a part object was outside the calculating region, artifacts were generally produced. However, the artifacts were reduced by subtracting the background from the image. In addition, the cupping phenomenon caused by beam hardening was relaxed and high-quality imaging could be achieved. This method will become even more effective, if we will use it with selective angiography in which the limited area is enhanced. (author)

Track Reconstruction in the ATLAS Experiment The Deterministic Annealing Filter

CERN Document Server

Fleischmann, S

2006-01-01

The reconstruction of the trajectories of charged particles is essential for experiments at the LHC. The experiments contain precise tracking systems structured in layers around the collision point which measure the positions where particle trajectories intersect those layers. The physics analysis on the other hand mainly needs the momentum and direction of the particle at the estimated creation or reaction point. It is therefore needed to determine these parameters from the initial measurements. At the LHC one has to deal with high backgrounds while even small deficits or artifacts can reduce the signal or may produce additional background after event selection. The track reconstruction does not only contain the estimation of the track parameters, but also a pattern recognition deciding which measurements belong to a track and how many particle tracks can be found. Track reconstruction at the ATLAS experiment suffers from the high event rate at the LHC resulting in a high occupancy of the tracking devices. A...

Reconstructed ancestral enzymes reveal that negative selection drove the evolution of substrate specificity in ADP-dependent kinases.

Science.gov (United States)

Castro-Fernandez, Víctor; Herrera-Morande, Alejandra; Zamora, Ricardo; Merino, Felipe; Gonzalez-Ordenes, Felipe; Padilla-Salinas, Felipe; Pereira, Humberto M; Brandão-Neto, Jose; Garratt, Richard C; Guixe, Victoria

2017-09-22

One central goal in molecular evolution is to pinpoint the mechanisms and evolutionary forces that cause an enzyme to change its substrate specificity; however, these processes remain largely unexplored. Using the glycolytic ADP-dependent kinases of archaea, including the orders Thermococcales , Methanosarcinales , and Methanococcales , as a model and employing an approach involving paleoenzymology, evolutionary statistics, and protein structural analysis, we could track changes in substrate specificity during ADP-dependent kinase evolution along with the structural determinants of these changes. To do so, we studied five key resurrected ancestral enzymes as well as their extant counterparts. We found that a major shift in function from a bifunctional ancestor that could phosphorylate either glucose or fructose 6-phosphate (fructose-6-P) as a substrate to a fructose 6-P-specific enzyme was started by a single amino acid substitution resulting in negative selection with a ground-state mode against glucose and a subsequent 1,600-fold change in specificity of the ancestral protein. This change rendered the residual phosphorylation of glucose a promiscuous and physiologically irrelevant activity, highlighting how promiscuity may be an evolutionary vestige of ancestral enzyme activities, which have been eliminated over time. We also could reconstruct the evolutionary history of substrate utilization by using an evolutionary model of discrete binary characters, indicating that substrate uses can be discretely lost or acquired during enzyme evolution. These findings exemplify how negative selection and subtle enzyme changes can lead to major evolutionary shifts in function, which can subsequently generate important adaptive advantages, for example, in improving glycolytic efficiency in Thermococcales . © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

INTRODUCTION OF A SECTORAL APPROACH TO TRANSPORT SECTOR FOR POST-2012 CLIMATE REGIME

Directory of Open Access Journals (Sweden)

Atit TIPPICHAI

2009-01-01

Full Text Available Recently, the concept of sectoral approaches has been discussed actively under the UNFCCC framework as it could realize GHG mitigations for the Kyoto Protocol and beyond. However, most studies have never introduced this approach to the transport sector explicitly or analyzed its impacts quantitatively. In this paper, we introduce a sectoral approach which aims to set sector-specific emission reduction targets for the transport sector for the post-2012 climate regime. We suppose that developed countries will commit to the sectoral reduction target and key developing countries such as China and India will have the sectoral no-lose targets — no penalties for the failure to meet targets but the right to sell exceeding reductions — for the medium term commitment, i.e. 2013–2020. Six scenarios of total CO2 emission reduction target in the transport sector in 2020, varying from 5% to 30% reductions from the 2005 level are established. The paper preliminarily analyzes shares of emission reductions and abatement costs to meet the targets for key developed countries including the USA, EU-15, Russia, Japan and Canada. To analyze the impacts of the proposed approach, we generate sectoral marginal abatement cost (MAC curves by region through extending a top-down economic model, namely the AIM/CGE model. The total emission reduction targets are analyzed against the developed MAC curves for the transport sector in order to obtain an equal marginal abatement cost which derives optimal emission reduction for each country and minimizes total abatement cost. The results indicate that the USA will play a crucial role in GHG mitigations in the transport sector as it is most responsible for emission reductions (i.e. accounts for more than 70% while Japan will least reduce (i.e. accounts for about 3% for all scenarios. In the case of a 5% reduction, the total abatement is equal to 171.1 MtCO2 with a total cost of 1.61 billion USD; and in the case of a 30

The effects of carbon prices and anti-leakage policies on selected industrial sectors in Spain – Cement, steel and oil refining

International Nuclear Information System (INIS)

Santamaría, Alberto; Linares, Pedro; Pintos, Pablo

2014-01-01

This paper assesses the impacts on the cement, steel and oil refining sectors in Spain of the carbon prices derived from the European Emissions Trading Scheme (EU ETS), and the potential effect on these sectors of the European Union anti-leakage policy measures. The assessment is carried out by means of three engineering models developed for this purpose. Our results show a high exposure to leakage of cement in coastal regions; a smaller risk in the steel sector, and non-negligible risk of leakage for the oil refining sector when carbon allowance prices reach high levels. We also find that the risk of leakage could be better handled with other anti-leakage policies than those currently in place in the EU. - Highlights: • We simulate the impact of carbon prices on the risk of leakage in the cement, steel and oil refining sectors. • We also assess the effectiveness of different anti-leakage policies in Europe. • Cement production in coastal areas is highly exposed. • The risk of leakage for steel and oil refining is smaller. • Anti-leakage policies should be modified to be efficient

Sustainability in the Food Sector: Rethinking the Relationship between the Agro‐Food System and the Natural, Social, Economic and Institutional Environments - Selected papers, 119th Seminar of the EAAE ‐

Directory of Open Access Journals (Sweden)

Gianni Cicia

2011-12-01

Full Text Available Sustainability in the Food Sector: Rethinking the Relationship between the Agro‐Food System and the Natural, Social, Economic and Institutional EnvironmentsSpecial issue with a selection of papers presented at the 119th Seminar of the European Association for Agricultural Economics (EAAE, Capri, Italy, June 30 - July 2, 2010Editors of the special issue:Gianni Cicia, University of Naples, ItalyMelanie Fritz, University of Bonn, Germany 

Prospection works for uranium in the sectors Loma Cimarron y Navarro

International Nuclear Information System (INIS)

Sanchez, J.; Olivera, J.; Cervantes, P.; Geler, T.; Fernandez, P.; Villarino, J.; Alcalde, J.

1995-01-01

The work show the resultate obtained from the prospection realized on sectors Navarro and Loma Cimarron which belong to e structure facial zone Esperanza. Saying works were projected to search radioactive minerals ore. The main result were the selection of perspective area which have been recommendation to evaluation in depth

Does the Sector Experience Affect the Pay Gap for Temporary Agency Workers?

DEFF Research Database (Denmark)

Jahn, Elke; Pozzoli, Dario

estimate the effects of the intensity of agency employment on the temp wage gap and post-temp earnings in Germany. Using a two-stage selection-corrected method in a panel data framework, we show that the wage gap for temps with low treatment intensity is high but decreases with exposure to the sector....... It seems that temps are able to accumulate human capital while being employed in this sector. Temps who move to permanent jobs have to accept a sizeable wage disadvantage at first, indicating that temporary agency employment might stigmatise workers. However, agency employment does not seem to leave a long...

Wealth of Nations or Wealth of Persons: World Billionaires and Sector Concentration

Directory of Open Access Journals (Sweden)

Harun YAKIŞIK

2013-06-01

Full Text Available Despite the recent global financial crisis, the number of billionaires in USA, Russia, China and Turkey has increased in the last five years, while it has remained at a constant scale in most developed European countries. The aim of the study is to explore whether wealth accumulation is closely related to the sector concentration in billionaire-generating countries. Unlike the previous studies on billionaires, this study examines the relationship between sectors and wealth accumulation of billionaires in some selected billionaire generating countries through secondary data from the Forbes list for the years from 2006 to 2011.

Impact analysis of leading sub sector on basic sector to regional income in Siak Regency, Riau Province

Science.gov (United States)

Astuti, P.; Nugraha, I.; Abdillah, F.

2018-02-01

During this time Siak regency only known as oil producing regency in Riau province, but based on the vision of spatial planning Siak’s regency in 2031 there was a shift from petroleum towards to other sectors such as agribusiness, agroindustry and tourism. The purpose of this study was to identify the sector base, the leading subsectors and shift with their characteristics and to identify the leading subsectors development priority. The method used in this research consisted of the method of Location Quotient (LQ, Shift Share, and Overlay method). The research results were used Location Quotient (LQ) to identify sector’s base in Siak regency based on the document of PDRB. The sector’s refers to the constant prices year of 2000 were mining and quarrying sector (2.25). The sector’s base using document of PDRB at constant prices 2000 without oil and gas sector was the agricultural sector with a value of LQ was 2,45. The leading sub sector in the Siak regency with mining and quarrying sector was oil and gas (1.02) and leading sub sector without oil and gas sector was the plantation sector (1.48) and forestry sector (1.73). Overlay analysis results shown that agriculture sector as a sector base and plantation and forestry as a leading sub sector has positive value and categorize as progressive and competitiveness. Because of that, this leading sub sector gets high priority to developing.

Mastectomy by inverted drip incision and immediate reconstruction: data from 510 cases

NARCIS (Netherlands)

A.N. van Geel (Albert); C.M.E. Contant; R.T.J. Wai (Rudi Tjong Joe); P.I.M. Schmitz (Paul); A.M.M. Eggermont (Alexander); M.B.E. Menke-Pluymers (Marian)

2003-01-01

textabstractBACKGROUND: Immediate reconstruction of the breast can be performed in selected cases after mastectomy for breast cancer or after prophylactic mastectomy in patients with a high risk of developing breast cancer. Despite the frequency with which these procedures are

Recent advances in the reconstruction of cranio-maxillofacial defects using computer-aided design/computer-aided manufacturing.

Science.gov (United States)

Oh, Ji-Hyeon

2018-12-01

With the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology, it has been possible to reconstruct the cranio-maxillofacial defect with more accurate preoperative planning, precise patient-specific implants (PSIs), and shorter operation times. The manufacturing processes include subtractive manufacturing and additive manufacturing and should be selected in consideration of the material type, available technology, post-processing, accuracy, lead time, properties, and surface quality. Materials such as titanium, polyethylene, polyetheretherketone (PEEK), hydroxyapatite (HA), poly-DL-lactic acid (PDLLA), polylactide-co-glycolide acid (PLGA), and calcium phosphate are used. Design methods for the reconstruction of cranio-maxillofacial defects include the use of a pre-operative model printed with pre-operative data, printing a cutting guide or template after virtual surgery, a model after virtual surgery printed with reconstructed data using a mirror image, and manufacturing PSIs by directly obtaining PSI data after reconstruction using a mirror image. By selecting the appropriate design method, manufacturing process, and implant material according to the case, it is possible to obtain a more accurate surgical procedure, reduced operation time, the prevention of various complications that can occur using the traditional method, and predictive results compared to the traditional method.

[Trachea repair and reconstruction with new composite artificial trachea transplantation].

Science.gov (United States)

Liu, Wenliang; Xiao, Peng; Liang, Hengxing; An, Ran; Cheng, Gang; Yu, Fenglei

2013-03-01

To construct a new composite artificial trachea and to investigate the feasibility of trachea repair and reconstruction with the new composite artificial trachea transplantation in dogs. The basic skeleton of the new composite artificial trachea was polytetrafluoroethylene vascular prosthesis linked with titanium rings at both ends. Dualmesh was sutured on titanium rings. Sixteen dogs, weighing (14.9 +/- 2.0) kg, female or male, were selected. The 5 cm cervical trachea was resected to prepare the cervical trachea defect model. The trachea repair and reconstruction was performed with the new composite artificial trachea. Then fiberoptic bronchoscope examination, CT scan and three-dimensinal reconstruction were conducted at immediate, 1 month, and 6 months after operation. Gross observation and histological examination were conducted at 14 months to evaluate the repair and reconstruction efficacy. No dog died during operation of trachea reconstruction. One dog died of dyspnea at 37, 41, 55, 66, 140, and 274 days respectively because of anastomotic dehiscence and artificial trachea displacement; the other 10 dogs survived until 14 months. The fiberoptic bronchoscope examination, CT scan and three-dimensinal reconstruction showed that artificial tracheas were all in good location without twisting at immediate after operation; mild stenosis occurred and anastomoses had slight granulation in 6 dogs at 1 month; severe stenosis developed and anastomosis had more granulation in 1 dog and the other dogs were well alive without anastomotic stenosis at 6 months. At 14 months, gross observation revealed that outer surface of the artificial trachea were encapsulated by fibrous connective tissue in all of 10 dogs. Histological examination showed inflammatory infiltration and hyperplasia of fibrous tissue and no epithelium growth on the inner wall of the artificial trachea. The new composite artificial trachea can be used to repair and reconstruct defect of the trachea for a short

Image reconstruction in k-space from MR data encoded with ambiguous gradient fields.

Science.gov (United States)

Schultz, Gerrit; Gallichan, Daniel; Weber, Hans; Witschey, Walter R T; Honal, Matthias; Hennig, Jürgen; Zaitsev, Maxim

2015-02-01

In this work, the limits of image reconstruction in k-space are explored when non-bijective gradient fields are used for spatial encoding. The image space analogy between parallel imaging and imaging with non-bijective encoding fields is partially broken in k-space. As a consequence, it is hypothesized and proven that ambiguities can only be resolved partially in k-space, and not completely as is the case in image space. Image-space and k-space based reconstruction algorithms for multi-channel radiofrequency data acquisitions are programmed and tested using numerical simulations as well as in vivo measurement data. The hypothesis is verified based on an analysis of reconstructed images. It is found that non-bijective gradient fields have the effect that densely sampled autocalibration data, used for k-space reconstruction, provide less information than a separate scan of the receiver coil sensitivity maps, used for image space reconstruction. Consequently, in k-space only the undersampling artifact can be unfolded, whereas in image space, it is also possible to resolve aliasing that is caused by the non-bijectivity of the gradient fields. For standard imaging, reconstruction in image space and in k-space is nearly equivalent, whereas there is a fundamental difference with practical consequences for the selection of image reconstruction algorithms when non-bijective encoding fields are involved. © 2014 Wiley Periodicals, Inc.

Non-Cartesian parallel imaging reconstruction.

Science.gov (United States)

Wright, Katherine L; Hamilton, Jesse I; Griswold, Mark A; Gulani, Vikas; Seiberlich, Nicole

2014-11-01

Non-Cartesian parallel imaging has played an important role in reducing data acquisition time in MRI. The use of non-Cartesian trajectories can enable more efficient coverage of k-space, which can be leveraged to reduce scan times. These trajectories can be undersampled to achieve even faster scan times, but the resulting images may contain aliasing artifacts. Just as Cartesian parallel imaging can be used to reconstruct images from undersampled Cartesian data, non-Cartesian parallel imaging methods can mitigate aliasing artifacts by using additional spatial encoding information in the form of the nonhomogeneous sensitivities of multi-coil phased arrays. This review will begin with an overview of non-Cartesian k-space trajectories and their sampling properties, followed by an in-depth discussion of several selected non-Cartesian parallel imaging algorithms. Three representative non-Cartesian parallel imaging methods will be described, including Conjugate Gradient SENSE (CG SENSE), non-Cartesian generalized autocalibrating partially parallel acquisition (GRAPPA), and Iterative Self-Consistent Parallel Imaging Reconstruction (SPIRiT). After a discussion of these three techniques, several potential promising clinical applications of non-Cartesian parallel imaging will be covered. © 2014 Wiley Periodicals, Inc.

Voting based object boundary reconstruction

Science.gov (United States)

Tian, Qi; Zhang, Like; Ma, Jingsheng

2005-07-01

A voting-based object boundary reconstruction approach is proposed in this paper. Morphological technique was adopted in many applications for video object extraction to reconstruct the missing pixels. However, when the missing areas become large, the morphological processing cannot bring us good results. Recently, Tensor voting has attracted people"s attention, and it can be used for boundary estimation on curves or irregular trajectories. However, the complexity of saliency tensor creation limits its applications in real-time systems. An alternative approach based on tensor voting is introduced in this paper. Rather than creating saliency tensors, we use a "2-pass" method for orientation estimation. For the first pass, Sobel d*etector is applied on a coarse boundary image to get the gradient map. In the second pass, each pixel puts decreasing weights based on its gradient information, and the direction with maximum weights sum is selected as the correct orientation of the pixel. After the orientation map is obtained, pixels begin linking edges or intersections along their direction. The approach is applied to various video surveillance clips under different conditions, and the experimental results demonstrate significant improvement on the final extracted objects accuracy.

Energy sector alliances

International Nuclear Information System (INIS)

McQuade, Owen

1998-09-01

Contains Executive Summary and Chapters on: A changing energy sector; Rationale for the joint venture, merger or acquisition; Mergers, acquisitions and joint ventures by sector; The joint venture process; Key factors for success; Financing the venture; Case studies; The future outlook. (Author)

Reconstruction of the interaction term between dark matter and dark energy using SNe Ia

Energy Technology Data Exchange (ETDEWEB)

Solano, Freddy Cueva; Nucamendi, Ulises, E-mail: freddy@ifm.umich.mx, E-mail: ulises@ifm.umich.mx [Instituto de Física y Matemáticas, Universidad Michoacana de San Nicolás de Hidalgo, Edificio C-3, Ciudad Universitaria, CP. 58040, Morelia, Michoacán (Mexico)

2012-04-01

We apply a parametric reconstruction method to a homogeneous, isotropic and spatially flat Friedmann-Robertson-Walker (FRW) cosmological model filled of a fluid of dark energy (DE) with constant equation of state (EOS) parameter interacting with dark matter (DM)\\@. The reconstruction method is based on expansions of the general interaction term and the relevant cosmological variables in terms of Chebyshev polynomials which form a complete set orthonormal functions. This interaction term describes an exchange of energy flow between the DE and DM within dark sector. To show how the method works we do the reconstruction of the interaction function expanding it in terms of only the first six Chebyshev polynomials and obtain the best estimation for the coefficients of the expansion assuming three models: (a) a DE equation of the state parameter w = −1 (an interacting cosmological Λ), (b) a DE equation of the state parameter w = constant with a dark matter density parameter fixed, (c) a DE equation of the state parameter w = constant with a free constant dark matter density parameter to be estimated, and using the Union2 SNe Ia data set from ''The Supernova Cosmology Project'' (SCP) composed by 557 type Ia supernovae. In both cases, the preliminary reconstruction shows that in the best scenario there exist the possibility of a crossing of the noninteracting line Q = 0 in the recent past within the 1σ and 2σ errors from positive values at early times to negative values at late times. This means that, in this reconstruction, there is an energy transfer from DE to DM at early times and an energy transfer from DM to DE at late times. We conclude that this fact is an indication of the possible existence of a crossing behavior in a general interaction coupling between dark components.

Cross-sector Innovation

DEFF Research Database (Denmark)

Würtz Jessen, Søren; Linnet, Andreas; Tscherning, Rasmus Wiinstedt

2013-01-01

The aim of this handbook is to help improve your opportunities for getting started on innovative and business development projects that reach beyond your own sector, commonly known as ’Cross-sector innovation’, or ’Cross innovation’ for short. We believe that there is a need for an easily read...... innovation handbook that can reach out to all sectors and potential partners whose point of departure, language use and understanding of customers is often very different to that of businesses. These differences constitute a resource for business development. If exploited they can lead to new ways of doing...... things and help us breakaway from the lull of the modes of expression and methods ‘customarily’ employed in business development. The handbook focuses on the interaction of “traditional’ businesses and sectors that belong to those known as the creative and the experience industries, i.e. designers...

[Reconstructive methods after Fournier gangrene].

Science.gov (United States)

Wallner, C; Behr, B; Ring, A; Mikhail, B D; Lehnhardt, M; Daigeler, A

2016-04-01

Fournier's gangrene is a variant of the necrotizing fasciitis restricted to the perineal and genital region. It presents as an acute life-threatening disease and demands rapid surgical debridement, resulting in large soft tissue defects. Various reconstructive methods have to be applied to reconstitute functionality and aesthetics. The objective of this work is to identify different reconstructive methods in the literature and compare them to our current concepts for reconstructing defects caused by Fournier gangrene. Analysis of the current literature and our reconstructive methods on Fournier gangrene. The Fournier gangrene is an emergency requiring rapid, calculated antibiotic treatment and radical surgical debridement. After the acute phase of the disease, appropriate reconstructive methods are indicated. The planning of the reconstruction of the defect depends on many factors, especially functional and aesthetic demands. Scrotal reconstruction requires a higher aesthetic and functional reconstructive degree than perineal cutaneous wounds. In general, thorough wound hygiene, proper pre-operative planning, and careful consideration of the patient's demands are essential for successful reconstruction. In the literature, various methods for reconstruction after Fournier gangrene are described. Reconstruction with a flap is required for a good functional result in complex regions as the scrotum and penis, while cutaneous wounds can be managed through skin grafting. Patient compliance and tissue demand are crucial factors in the decision-making process.

Automatic spectral imaging protocol selection and iterative reconstruction in abdominal CT with reduced contrast agent dose: initial experience.

Science.gov (United States)

Lv, Peijie; Liu, Jie; Chai, Yaru; Yan, Xiaopeng; Gao, Jianbo; Dong, Junqiang

2017-01-01

To evaluate the feasibility, image quality, and radiation dose of automatic spectral imaging protocol selection (ASIS) and adaptive statistical iterative reconstruction (ASIR) with reduced contrast agent dose in abdominal multiphase CT. One hundred and sixty patients were randomly divided into two scan protocols (n = 80 each; protocol A, 120 kVp/450 mgI/kg, filtered back projection algorithm (FBP); protocol B, spectral CT imaging with ASIS and 40 to 70 keV monochromatic images generated per 300 mgI/kg, ASIR algorithm. Quantitative parameters (image noise and contrast-to-noise ratios [CNRs]) and qualitative visual parameters (image noise, small structures, organ enhancement, and overall image quality) were compared. Monochromatic images at 50 keV and 60 keV provided similar or lower image noise, but higher contrast and overall image quality as compared with 120-kVp images. Despite the higher image noise, 40-keV images showed similar overall image quality compared to 120-kVp images. Radiation dose did not differ between the two protocols, while contrast agent dose in protocol B was reduced by 33 %. Application of ASIR and ASIS to monochromatic imaging from 40 to 60 keV allowed contrast agent dose reduction with adequate image quality and without increasing radiation dose compared to 120 kVp with FBP. • Automatic spectral imaging protocol selection provides appropriate scan protocols. • Abdominal CT is feasible using spectral imaging and 300 mgI/kg contrast agent. • 50-keV monochromatic images with 50 % ASIR provide optimal image quality.

Segeberg 1600 - Reconstructing a Historic Town for Virtual Reality Visualisation as AN Immersive Experience

Science.gov (United States)

Deggim, S.; Kersten, T. P.; Tschirschwitz, F.; Hinrichsen, N.

2017-11-01

The 3D reconstruction of historic buildings and cities offers an opportunity to experience the history of relevant objects and their development over the centuries. Digital visualisations of such historic objects allow for a more natural view of history as well as showing information that is not possible in a real world setting. New presentation forms, such as the virtual reality (VR) system HTC Vive, can be used to disseminate information in another dimension and simplify the access by changing the user's viewpoint from a listener and viewer into being an integrated part of an interactive situation. In general, this approach is a combination of education and entertainment, also known as "edutainment" or "gamification", a term used in the education sector as describing where motivation to learn is encouraged through adding a competitive element. It is thus a step away from simple consumption of information towards experiencing information and a more literal interpretation of "living history". In this contribution, we present the development of a 3D reconstruction of the two towns Segeberg and Gieschenhagen (today: Bad Segeberg) in Schleswig-Holstein, Germany in the Early Modern Age around 1600. The historic landscape and its conversion from a reconstructed virtual town model into an interactive VR application is also described. The reconstruction is based on a recent digital terrain model as well as survey data of surviving buildings, historic visual information based on historic drawings and written accounts from that era. All datasets are combined to a single walkable virtual world that spans approximately 3 km2.

Shaping the breast in secondary microsurgical breast reconstruction: single- vs. two-esthetic unit reconstruction.

Science.gov (United States)

Gravvanis, Andreas; Smith, Roger W

2010-10-01

The esthetic outcome is dictated essentially not only by the position, size, and shape of the reconstructed breast, but also by the extra scaring involved. In the present study, we conducted a visual analog scale survey to compare the esthetic outcome in delayed autologous breast reconstruction following two different abdominal flaps inset. Twenty-five patients had their reconstruction using the Single-esthetic Unit principle and were compared with 25 patients that their breast was reconstructed using the Two-Esthetic Unit principle. Photographic images were formulated to a PowerPoint presentation and cosmetic outcomes were assessed from 30 physicians, by means of a Questionnaire and a visual analog scale. Our data showed that the single-esthetic unit breast reconstruction presents significant advantages over the traditional two-esthetic units, due to inconspicuous flap reconstruction, better position of the inframammary fold, and more natural transition from native and reconstructed tissues. Moreover, patient self-evaluation of esthetic outcome and quality of life showed that single-esthetic unit reconstruction is associated with higher patient satisfaction, therefore should be considered the method of choice. © 2010 Wiley-Liss, Inc.

Prospective regularization design in prior-image-based reconstruction

International Nuclear Information System (INIS)

Dang, Hao; Siewerdsen, Jeffrey H; Stayman, J Webster

2015-01-01

Prior-image-based reconstruction (PIBR) methods leveraging patient-specific anatomical information from previous imaging studies and/or sequences have demonstrated dramatic improvements in dose utilization and image quality for low-fidelity data. However, a proper balance of information from the prior images and information from the measurements is required (e.g. through careful tuning of regularization parameters). Inappropriate selection of reconstruction parameters can lead to detrimental effects including false structures and failure to improve image quality. Traditional methods based on heuristics are subject to error and sub-optimal solutions, while exhaustive searches require a large number of computationally intensive image reconstructions. In this work, we propose a novel method that prospectively estimates the optimal amount of prior image information for accurate admission of specific anatomical changes in PIBR without performing full image reconstructions. This method leverages an analytical approximation to the implicitly defined PIBR estimator, and introduces a predictive performance metric leveraging this analytical form and knowledge of a particular presumed anatomical change whose accurate reconstruction is sought. Additionally, since model-based PIBR approaches tend to be space-variant, a spatially varying prior image strength map is proposed to optimally admit changes everywhere in the image (eliminating the need to know change locations a priori). Studies were conducted in both an ellipse phantom and a realistic thorax phantom emulating a lung nodule surveillance scenario. The proposed method demonstrated accurate estimation of the optimal prior image strength while achieving a substantial computational speedup (about a factor of 20) compared to traditional exhaustive search. Moreover, the use of the proposed prior strength map in PIBR demonstrated accurate reconstruction of anatomical changes without foreknowledge of change locations in

Abnormal tibiofemoral contact stress and its association with altered kinematics after center-center anterior cruciate ligament reconstruction: an in vitro study.

Science.gov (United States)

Imhauser, Carl; Mauro, Craig; Choi, Daniel; Rosenberg, Eric; Mathew, Stephen; Nguyen, Joseph; Ma, Yan; Wickiewicz, Thomas

2013-04-01

Abnormal tibiofemoral contact stress and aberrant kinematics may influence the progression of osteoarthritis in the anterior cruciate ligament (ACL)-deficient and the ACL-reconstructed knee. However, relationships between contact stress and kinematics after ACL reconstruction are poorly understood. Therefore, we posed the following research questions: (1) How do ACL deficiency and reconstruction affect the kinematics of and contact stress in the tibiofemoral joint? (2) What kinematic differences are associated with abnormal contact stress after ACL reconstruction? Center-center ACL reconstruction will not restore knee kinematics and contact stress. Correlations will exist between abnormal contact stress and aberrant kinematics after ACL reconstruction. Controlled laboratory study. Clinical tests of anterior and rotational stability were simulated on 11 cadaveric knees using an industrial robot. Tests were conducted with the ACL intact, sectioned, and after single-bundle ACL reconstruction using a quadrupled hamstring autograft with tunnels drilled through the center of the native footprints. Kinematics were recorded during the tests. Contact stress was continuously recorded from a stress transducer fixed to the tibial plateau, and mean contact stress was calculated regionally. ACL deficiency resulted in increased mean contact stress in the posterior sectors of the medial and lateral compartments under anterior and rotational loads, respectively. Reconstruction reduced stress in these locations; however, contact stress abnormalities remained. On average, kinematics were overconstrained after ACL reconstruction (≤1.8 mm and ≤2.6° in all directions). However, combinations of overconstrained and underconstrained motions in abduction/adduction and medial-lateral translation in response to combined moments, and anterior-posterior translation, medial-lateral translation, and axial rotation in response to an anterior load were associated with abnormal mean contact

Our Clinical Experience in Lower Eyelid Reconstruction and Comparison of Reconstruction Techniques.

Directory of Open Access Journals (Sweden)

Erol Kesiktas

2011-03-01

Full Text Available Lower eyelid reconstruction after tumor resection or trauma is extremely important in order to obtain the protection of the globe and it requires extra care. The aim of this study is to evaluate the techniques that we use in lower eyelid reconstruction. Between the years of 1999-2009, a total of 23 patients who had lower eyelid defects due to tumor resection (21 patients or trauma (2 patients were reconstructed by the use of various flaps. Eleven of the patients were women and twelve of them were men. Average age was 60.7. For the reconstruction 13 Mustarde flap, 9 bipedicled Tripier flap, 1 Tenzel flap and 1 bipedicled infraorbital flaps were used. Average postoperative follow up interval was 35 months. (18-47 months. Flap necrosis, function loss in the lower lid were not experienced in any of the patients. Cosmetically satisfactory results were obtained. In lower eyelid reconstruction, the size of the defect and the amount of skin around must be carefully evaluated and should be considered while planning the reconstruction. [Cukurova Med J 2011; 36(1: 15-23

Role of Manufacturing Sector and Trade, Hotel, Restaurant Sector In East Java’s Economy: Input Output Analysis

Directory of Open Access Journals (Sweden)

Anggari Marya Kresnowati

2016-11-01

Full Text Available This study aimed to (1 analyze the relationship the manufacturing sector and the trade, hotel, and restaurant sector with other sectors in East Java, (2 to analyze the economic impact caused the two sectors based on the multiplier effect, (3 and analyze the economic impact caused by these two sectors if there additional investment funds. This study uses data analysis input output 2010 East Java 19x19 aggregation sector.The results indicate that base metals subsector has the highest linkages to other sectors. Based on household income multiplier effect, trade subsector has the greatest multiplier. Employment multiplier in trade and industrial sectors are in medium rank. This is indicates that the labor has been absorbed well in both sectors. The output multiplier effect, subsector non-metal goods, except petroleum and coal has the highest multiplier. The last, according to the analysis of investment injection simulations Input-Output East Java in 2010, subsector other processing industries has a best value added. Overall, the manufacturing sector has a better influence to East Java's economy than trade, hotel, and restaurant sector.

Gender differences in the knee adduction moment after anterior cruciate ligament reconstruction surgery.

Science.gov (United States)

Webster, Kate E; McClelland, Jodie A; Palazzolo, Simon E; Santamaria, Luke J; Feller, Julian A

2012-04-01

The external knee adduction moment during gait has previously been associated with knee pain and osteoarthritis (OA). Recently, the knee adduction moment has been shown to be increased following anterior cruciate ligament (ACL) reconstruction surgery and has been suggested as a potential mechanism for the progression of early onset knee OA in this population. No study has investigated the gender differences in gait biomechanics following ACL reconstruction. To examine gender differences in gait biomechanics following ACL reconstruction surgery. 36 subjects (18 females, 18 males) who had previously undergone ACL reconstruction surgery (mean time since surgery 20 months) underwent gait analysis at a self-selected walking speed. Males and females were well matched for age, time since surgery and walking speed. Maximum flexion and adduction angles and moments were recorded during the stance phase of level walking and compared between the male and female groups. The knee adduction moment was 23% greater in the female compared with the male ACL group. No gender differences were seen in the sagittal plane. No differences were seen between the reconstructed and contralateral limb. The higher knee adduction moment seen in females compared with males may suggest an increased risk for the development of OA in ACL-reconstructed females.

Synchronized multiartifact reduction with tomographic reconstruction (SMART-RECON): A statistical model based iterative image reconstruction method to eliminate limited-view artifacts and to mitigate the temporal-average artifacts in time-resolved CT.

Science.gov (United States)

Chen, Guang-Hong; Li, Yinsheng

2015-08-01

images were quantified using the relative root mean square error (rRMSE) and the universal quality index (UQI) in numerical simulations. The performance of the SMART-RECON algorithm was compared with that of the prior image constrained compressed sensing (PICCS) reconstruction quantitatively in simulations and qualitatively in human subject exam. In numerical simulations, the 240(∘) short scan angular span was divided into four consecutive 60(∘) angular subsectors. SMART-RECON enables four high temporal fidelity images without limited-view artifacts. The average rRMSE is 16% and UQIs are 0.96 and 0.95 for the two local regions of interest, respectively. In contrast, the corresponding average rRMSE and UQIs are 25%, 0.78, and 0.81, respectively, for the PICCS reconstruction. Note that only one filtered backprojection image can be reconstructed from the same data set with an average rRMSE and UQIs are 45%, 0.71, and 0.79, respectively, to benchmark reconstruction accuracies. For in vivo contrast enhanced cone beam CT data acquired from a short scan angular span of 200(∘), three 66(∘) angular subsectors were used in SMART-RECON. The results demonstrated clear contrast difference in three SMART-RECON reconstructed image volumes without limited-view artifacts. In contrast, for the same angular sectors, PICCS cannot reconstruct images without limited-view artifacts and with clear contrast difference in three reconstructed image volumes. In time-resolved CT, the proposed SMART-RECON method provides a new method to eliminate limited-view artifacts using data acquired in an ultranarrow temporal window, which corresponds to approximately 60(∘) angular subsectors.

Novel Fourier-based iterative reconstruction for sparse fan projection using alternating direction total variation minimization

International Nuclear Information System (INIS)

Jin Zhao; Zhang Han-Ming; Yan Bin; Li Lei; Wang Lin-Yuan; Cai Ai-Long

2016-01-01

Sparse-view x-ray computed tomography (CT) imaging is an interesting topic in CT field and can efficiently decrease radiation dose. Compared with spatial reconstruction, a Fourier-based algorithm has advantages in reconstruction speed and memory usage. A novel Fourier-based iterative reconstruction technique that utilizes non-uniform fast Fourier transform (NUFFT) is presented in this work along with advanced total variation (TV) regularization for a fan sparse-view CT. The proposition of a selective matrix contributes to improve reconstruction quality. The new method employs the NUFFT and its adjoin to iterate back and forth between the Fourier and image space. The performance of the proposed algorithm is demonstrated through a series of digital simulations and experimental phantom studies. Results of the proposed algorithm are compared with those of existing TV-regularized techniques based on compressed sensing method, as well as basic algebraic reconstruction technique. Compared with the existing TV-regularized techniques, the proposed Fourier-based technique significantly improves convergence rate and reduces memory allocation, respectively. (paper)

Boot-camps, facilitators for innovation in the American nuclear sector

International Nuclear Information System (INIS)

Martinez Sancho, L.; Avrin, A.P.

2017-01-01

One of the first Nuclear Innovation Boot-camps was organized by the Berkeley University in august 2016, its aim was to develop innovation in nuclear technology through a collective approach in which people from different sectors share information and knowledge. The rules to follow come from the EFICA method: first, no censorship during the 'construction' phase, any idea is welcome; secondly, the more ideas, the more likely to get a relevant one; thirdly, unrealistic ideas can be turned into realistic ideas more often than expected so participants have to be imaginative; and fourthly, favor discussions in which ideas from different participants combine and generate new ideas. The Breakthrough Institute has made 5 propositions to favour innovation in the American nuclear sector: 1) to reform the certification process so that small companies can take part into it; 2) to make public laboratory equipment available to private enterprises; 3) to increase the public financing of research; 4) to let the private sector select the most appropriate technology even if there are public funds in the process. (A.C.)

Abnormal tibiofemoral contact stress and its association with altered kinematics following center-center ACL reconstruction: an in vitro study

Science.gov (United States)

Imhauser, Carl; Mauro, Craig; Choi, Daniel; Rosenberg, Eric; Mathew, Stephen; Nguyen, Joseph; Ma, Yan; Wickiewicz, Thomas

2014-01-01

Background Abnormal tibiofemoral contact stress and aberrant kinematics may influence the progression of osteoarthritis in the ACL-deficient and the ACL-reconstructed knee. However, relationships between contact stress and kinematics following ACL reconstruction are poorly understood. Therefore, we posed the following research questions: (1) How do ACL deficiency and reconstruction affect kinematics of and contact stress in the tibiofemoral joint? (2) What kinematic differences are associated with abnormal contact stress following ACL reconstruction? Hypothesis/Purpose Center-center ACL reconstruction will not restore knee kinematics and contact stress. Correlations will exist between abnormal contact stress and aberrant kinematics following ACL reconstruction will exist. Study Design Controlled laboratory study Methods Clinical tests of anterior and rotational stability were simulated on eleven cadaveric knees using an industrial robot. Tests were conducted with the ACL intact, sectioned, and after single bundle ACL reconstruction using a quadrupled hamstring autograft with tunnels drilled through the center of the native footprints. Kinematics were recorded during the tests. Contact stress was continuously recorded from a stress transducer fixed to the tibial plateau and mean contact stress was calculated regionally. Results ACL deficiency resulted in increased mean contact stress in the posterior sectors of the medial and lateral compartments under anterior and rotational loads, respectively. Reconstruction reduced stress in these locations; however contact stress abnormalities remained. On average, kinematics were overconstrained following ACL reconstruction (≤1.8mm and ≤2.6° in all directions). However, combinations of overconstrained and underconstrained motions in ab/adduction and medial-lateral translation in response to combined moments, and axial rotation, anterior-posterior and medial-lateral translation in response to an anterior load were

Influence of air mass source sector on variations in CO2 mixing ratio at a boreal site in northern Finland

International Nuclear Information System (INIS)

Aalto, T.; Hatakka, J.; Viisanen, Y.

2003-01-01

CO 2 mixing ratio in air masses coming from different source sectors was studied at Pallas measurement station in Lapland. Source sectors were defined using back trajectories and wind direction measurements. Air masses from the North and West sectors showed an annual variation of 17 ppm, possibly affected by a long range transported marine air. A larger variation of 20 ppm was observed in air masses from the more continental South and East sectors. During late autumn mixing ratios in air masses from the South sector were high in comparison with the other sectors. Different methods for a source sector definition were considered for the site, located in a contoured terrain. 52%-73% of wind direction-based source sector definitions agreed with trajectory- based definitions. However, the number of cases with reliable sector definitions may remain low when considering all observations. Different definition methods can cause differences of the order of 1 ppm in sectorially selected monthly mean CO 2 mixing ratios. (orig.)

Reconstruction of caldera collapse and resurgence processes in the offshore sector of the Campi Flegrei caldera (Italy)

Science.gov (United States)

Steinmann, Lena; Spiess, Volkhard; Sacchi, Marco

2015-04-01

Large collapse calderas are associated with exceptionally explosive volcanic eruptions, which are capable of triggering a global catastrophe second only to that from a giant meteorite impact. Therefore, active calderas have attracted significant attention in both scientific communities and governmental institutions worldwide. One prime example of a large collapse caldera can be found in southern Italy, more precisely in the northern Bay of Naples within the Campi Flegrei Volcanic Area. The Campi Flegrei caldera covers an area of approximately 200 km² defined by a quasi-circular depression, half onland, half offshore. It is still under debate whether the caldera formation was related to only one ignimbritic eruption namely the Neapolitan Yellow Tuff (NYT) eruption at 15 ka or if it is a nested-caldera system related to the NYT and the Campanian Ignimbrite eruption at 39 ka. During the last 40 years, the Campi Flegrei caldera has experienced episodes of unrest involving significant ground deformation and seismicity, which have nevertheless not yet led to an eruption. Besides these short-term episodes of unrest, long-term ground deformation with rates of several tens of meters within a few thousand years can be observed in the central part of the caldera. The source of both short-term and long-term deformation is still under debate and possibly related to a shallow hydrothermal system and caldera resurgence attributed to a deeper magma chamber, respectively. Understanding the mechanisms for unrest and eruptions is of paramount importance as a future eruption of the Campi Flegrei caldera would expose more than 500,000 people to the risk of pyroclastic flows. This study is based on a dense grid (semi-3D) of high-resolution multi-channel seismic profiles acquired in the offshore sector of the Campi Flegrei caldera. The seismic lines show evidence for the escape of fluids and/or gases along weak zones such as faults, thereby supporting the existence of a hydrothermal

Factors influencing the retention of midwives in the public sector in Afghanistan: a qualitative assessment of midwives in eight provinces.

Science.gov (United States)

Wood, Molly E; Mansoor, G Farooq; Hashemy, Pashton; Namey, Emily; Gohar, Fatima; Ayoubi, Saadia Fayeq; Todd, Catherine S

2013-10-01

to examine factors that affect retention of public sector midwives throughout their career in Afghanistan. qualitative assessment using semi-structured in-depth interviews (IDIs) and focus group discussions (FGDs). health clinics in eight provinces in Afghanistan, midwifery education schools in three provinces, and stakeholder organisations in Kabul. purposively sampled midwifery profession stakeholders in Kabul (n=14 IDIs); purposively selected community midwifery students in Kabul (n=3 FGDs), Parwan (n=1 FGD) and Wardak (n=1 FGD) provinces (six participants per FGD); public sector midwives, health facility managers, and community health workers from randomly selected clinics in eight provinces (n=48 IDIs); midwives who had left the public sector midwifery service (n=5 IDIs). several factors affect a midwife throughout her career in the public sector, including her selection as a trainee, the training itself, deployment to her pre-assigned post, and working in clinics. Overall, appropriate selection is the key to ensuring deployment and retention later on in a midwife's career. Other factors that affect retention of midwives include civil security concerns in rural areas, support of family and community, salary levels, professional development opportunities and workplace support, and inefficient human resources planning in the public sector. Factors affecting midwife retention are linked to problems within the community midwifery education (CME) programme and those reflecting the wider Afghan context. Civil insecurity and traditional attitudes towards women were major factors identified that negatively affect midwifery retention. Factors such as civil insecurity and traditional attitudes towards women require a multisectoral response and innovative strategies to reduce their impact. However, factors inherent to midwife career development also impact retention and may be more readily modified. © 2013 Elsevier Ltd. All rights reserved.

Evaluation of analytical reconstruction with a new gap-filling method in comparison to iterative reconstruction in [11C]-raclopride PET studies

International Nuclear Information System (INIS)

Tuna, U.; Johansson, J.; Ruotsalainen, U.

2014-01-01

The aim of the study was (1) to evaluate the reconstruction strategies with dynamic [ 11 C]-raclopride human positron emission tomography (PET) studies acquired from ECAT high-resolution research tomograph (HRRT) scanner and (2) to justify for the selected gap-filling method for analytical reconstruction with simulated phantom data. A new transradial bicubic interpolation method has been implemented to enable faster analytical 3D-reprojection (3DRP) reconstructions for the ECAT HRRT PET scanner data. The transradial bicubic interpolation method was compared to the other gap-filling methods visually and quantitatively using the numerical Shepp-Logan phantom. The performance of the analytical 3DRP reconstruction method with this new gap-filling method was evaluated in comparison with the iterative statistical methods: ordinary Poisson ordered subsets expectation maximization (OPOSEM) and resolution modeled OPOSEM methods. The image reconstruction strategies were evaluated using human data at different count statistics and consequently at different noise levels. In the assessments, 14 [ 11 C]-raclopride dynamic PET studies (test-retest studies of 7 healthy subjects) acquired from the HRRT PET scanner were used. Besides the visual comparisons of the methods, we performed regional quantitative evaluations over the cerebellum, caudate and putamen structures. We compared the regional time-activity curves (TACs), areas under the TACs and binding potential (BP ND ) values. The results showed that the new gap-filling method preserves the linearity of the 3DRP method. Results with the 3DRP after gap-filling method exhibited hardly any dependency on the count statistics (noise levels) in the sinograms while we observed changes in the quantitative results with the EM-based methods for different noise contamination in the data. With this study, we showed that 3DRP with transradial bicubic gap-filling method is feasible for the reconstruction of high-resolution PET data with

Refurbishment priorities at the Russian coal-fired power sector for cleaner energy production-Case studies

International Nuclear Information System (INIS)

Grammelis, P.; Koukouzas, N.; Skodras, G.; Kakaras, E.; Tumanovsky, A.; Kotler, V.

2006-01-01

The paper aims to present the current status of the coal-fired power sector in Russia, the prospects for renovation activities based on Clean Coal Technologies (CCT) and two case studies on potential refurbishment projects. Data were collected for 180 thermoelectric units with capacity higher than 100 MWe and the renovation needs of the power sector, among the retrofitting, repowering and reconstruction options, were estimated through a multi-criteria analysis. The most attractive system to renovate a power plant between the Supercritical Combustion (SC) and the Fluidized Bed Combustion (FBC) technologies was evaluated. The application of each of the aforementioned technologies at the Kashirskaya and Shaturskaya power plants was studied and their replication potential in the Russian coal-fired power plant park was examined. Nowadays, the installed capacity of coal-fired power plants in the Russian Federation is 29.3 GWe, while they account for about 19% of the total electricity generation in the area. The low efficiency and especially the advanced age are the determinant factors for renovation applications at the Russian units. Even in the more conservative modernization scenario, over 30% of the thermoelectric units have to be repowered or reconstructed. Concrete proposals about the profitable and reliable operation of two Russian thermoelectric units with minimized environmental effects were elaborated. A new unit of 315 MWe with supercritical steam parameters and reburning for NO x abatement is envisaged to upgrade Unit 1 of Kashirskaya power station, while new Circulating Fluidized Bed (CFB) boilers of the same steam generation is the most promising renovation option for the boilers of Unit 1 in Shaturskaya power station

Refurbishment priorities at the Russian coal-fired power sector for cleaner energy production case studies

Energy Technology Data Exchange (ETDEWEB)

P. Grammelis; N. Koukouzas; G. Skodras; E. Kakaras; A. Tumanovsky; V. Kotler [Centre for Research and Technology Hellas/Institute of Solid Fuels Technology and Applications (CERTH/ISFTA), Ptolemaida (Greece)

2006-11-15

The paper reviews the current status of the coal-fired power sector in Russia, the prospects for renovation activities based on Clean Coal Technologies (CCT) and presents two case studies on potential refurbishment projects. Data were collected for 180 thermoelectric units with capacity higher than 100 MWe and the renovation needs of the power sector, among the retrofitting, repowering and reconstruction options, were estimated through a multi-criteria analysis. The most attractive system to renovate a power plant between the Supercritical Combustion (SC) and the Fluidized Bed Combustion (FBC) technologies was evaluated. The application of each of the aforementioned technologies at the Kashirskaya and Shaturskaya power plants was studied and their replication potential in the Russian coal-fired power plant park was examined. Nowadays, the installed capacity of coal-fired power plants in the Russian Federation is 29.3 GWe, while they account for about 19% of the total electricity generation in the area. The low efficiency and especially the advanced age are the determinant factors for renovation applications at the Russian units. Even in the more conservative modernization scenario, over 30% of the thermoelectric units have to be repowered or reconstructed. Concrete proposals about the profitable and reliable operation of two Russian thermoelectric units with minimized environmental effects were elaborated. A new unit of 315 MWe with supercritical steam parameters and reburning for NOx abatement is envisaged to upgrade Unit 1 of Kashirskaya power station, while new circulating fluidized bed (CFB) boilers of the same steam generation is the most promising renovation option for the boilers of Unit 1 in Shaturskaya power station. 11 refs., 15 figs., 7 tabs.

Refurbishment priorities at the Russian coal-fired power sector for cleaner energy production-Case studies

Energy Technology Data Exchange (ETDEWEB)

Grammelis, P. [Centre for Research and Technology Hellas/Institute of Solid Fuels Technology and Applications (CERTH/ISFTA), 4 km N.R. Ptolemaida-Kozani, P.O. Box 95, Ptolemaida 50200 (Greece) and Laboratory of Steam Boilers and Thermal Plants, Mechanical Engineering Department, National Technical University of Athens, Athens (Greece)]. E-mail: pgra@central.ntua.gr; Koukouzas, N. [Centre for Research and Technology Hellas/Institute of Solid Fuels Technology and Applications (CERTH/ISFTA), 4 km N.R. Ptolemaida-Kozani, P.O. Box 95, Ptolemaida 50200 (Greece); Skodras, G. [Centre for Research and Technology Hellas/Institute of Solid Fuels Technology and Applications (CERTH/ISFTA), 4 km N.R. Ptolemaida-Kozani, P.O. Box 95, Ptolemaida 50200 (Greece); Kakaras, E. [Centre for Research and Technology Hellas/Institute of Solid Fuels Technology and Applications (CERTH/ISFTA), 4 km N.R. Ptolemaida-Kozani, P.O. Box 95, Ptolemaida 50200 (Greece); Laboratory of Steam Boilers and Thermal Plants, Mechanical Engineering Department, National Technical University of Athens, Athens (Greece); Tumanovsky, A. [VTI All Russia Thermal Engineering Institute (Russian Federation); Kotler, V. [VTI All Russia Thermal Engineering Institute (Russian Federation)

2006-11-15

The paper aims to present the current status of the coal-fired power sector in Russia, the prospects for renovation activities based on Clean Coal Technologies (CCT) and two case studies on potential refurbishment projects. Data were collected for 180 thermoelectric units with capacity higher than 100 MWe and the renovation needs of the power sector, among the retrofitting, repowering and reconstruction options, were estimated through a multi-criteria analysis. The most attractive system to renovate a power plant between the Supercritical Combustion (SC) and the Fluidized Bed Combustion (FBC) technologies was evaluated. The application of each of the aforementioned technologies at the Kashirskaya and Shaturskaya power plants was studied and their replication potential in the Russian coal-fired power plant park was examined. Nowadays, the installed capacity of coal-fired power plants in the Russian Federation is 29.3 GWe, while they account for about 19% of the total electricity generation in the area. The low efficiency and especially the advanced age are the determinant factors for renovation applications at the Russian units. Even in the more conservative modernization scenario, over 30% of the thermoelectric units have to be repowered or reconstructed. Concrete proposals about the profitable and reliable operation of two Russian thermoelectric units with minimized environmental effects were elaborated. A new unit of 315 MWe with supercritical steam parameters and reburning for NO {sub x} abatement is envisaged to upgrade Unit 1 of Kashirskaya power station, while new Circulating Fluidized Bed (CFB) boilers of the same steam generation is the most promising renovation option for the boilers of Unit 1 in Shaturskaya power station.

SECTORAL SHARES AND ECONOMIC GROWTH

DEFF Research Database (Denmark)

Ahmad, Nisar; Naveed, Amjad; Naz, Amber

2013-01-01

believe that structural change is an unimportant side effect of the economic development. On the contrary, economists associated with the World Bank and some others posit that growth is brought about by the changes in sectoral composition. The objective of this study is to empirically test...... the relationship between sectoral shares and economic growth by using the panel data for 20 developed countries. The results of the granger causality suggest that both services and agriculture sectors do granger cause economic growth, whereas industrial sector does not granger cause growth. Reverse causality does...... not hold for any of the three sectors. The results of Barro and Non-Barro regressions along with the set of control variables have suggested that services sector is negatively affecting growth, whereas both industrial and agriculture shares are positively affect economic growth....

Absorptive Capacities of Local Enterprises from the Electric-Electronics Sector In the State of Tamaulipas, Mexico

Directory of Open Access Journals (Sweden)

Francisco García Fernández

2012-02-01

Full Text Available The paper analyzes the absorptive capacities of a group of enterprises from the electric-electronics sector in the state of Tamaulipas Mexico. First, the literature on absorptive capabilities is reviewed, adopting an evolutionist approach. Then, an analysis of the sector is carried out in order to verify the recent changes made in various indicators – value of the total products by the selected states, job generation and productivity rates – based on data from the last three economic censuses. Finally, an analysis of the three selected enterprises’ absorptive capacities is addressed from a case study perspective, making our own interpretation of the construct based on the integration of the different analyzed proposals.

Power sector reform in Maharashtra, India

International Nuclear Information System (INIS)

Totare, Ninad P.; Pandit, Shubha

2010-01-01

In early 1990 the power sector in India required an initial set of reforms due to the scarcity of financial resources and its deteriorating technical and commercial efficiency. The Indian power sector is now going through a second stage of reforms in which restructuring of electric supply utilities has taken place. The Maharashtra State Electricity Board (MSEB) initiated reforms in 2005 by dividing the state electricity board into four separate companies. In this paper, the situations that led to the reform of the MSEB and the scope of the work required for an action plan initiated by the state electricity distribution company in the context of the proposed Key Performance Index are discussed. The post-reform status of the distribution company is analyzed with selected key parameters. The study also analyzes the electricity supply model implemented and the effect of a multi-year tariff plan as one of the key milestones of the tariff structure. The various new projects implemented by the distribution company to improve consumer services and the reform experiences of the other states are discussed, along with the future scope of the present reform process. (author)

A new OH5 reconstruction with an assessment of its uncertainty.

Science.gov (United States)

Benazzi, Stefano; Bookstein, Fred L; Strait, David S; Weber, Gerhard W

2011-07-01

The OH5 cranium, holotype of Paranthropus boisei consists of two main portions that do not fit together: the extensively reconstructed face and a portion of the neurocranium. A physical reconstruction of the cranium was carried out by Tobias in 1967, who did not discuss problems related to deformation, although he noted a slight functional asymmetry. Nevertheless, the reconstructed cranium shows some anomalies, mainly due to the right skewed position of the upper calvariofacial fragment and uncertainty of the relative position of the neurocranium to the face, which hamper further quantitative analysis of OH5's cranial geometry. Here, we present a complete virtual reconstruction of OH5, using three-dimensional (3D) digital data, geometric morphometric (GM) methods and computer-aided design (CAD) techniques. Starting from a CT scan of Tobias's reconstruction, a semi-automatic segmentation method was used to remove Tobias's plaster. The upper calvariofacial fragment was separated from the lower facial fragment and re-aligned using superposition of their independent midsagittal planes in a range of feasible positions. The missing parts of the right hemiface were reconstructed using non-uniform rational basis-spline (NURBS) surface and subsequently mirrored using the midsagittal plane to arrive at a symmetrical facial reconstruction. A symmetric neurocranium was obtained as the average of the original shape and its mirrored version. The alignment between the two symmetric shapes (face and neurocranium) used their independent midsagittal plane and a reference shape (KNM-ER 406) to highly reduce their degrees of freedom. From the series of alternative reconstructions, we selected the middle of this rather small feasible range. When reconstructed as a range in this way, the whole cranial form of this unique specimen can be further quantified by comparative coordinate-based methods such as GM or can be used for finite element modeling (FEM) explorations of hypotheses about

Permutationally invariant state reconstruction

DEFF Research Database (Denmark)

Moroder, Tobias; Hyllus, Philipp; Tóth, Géza

2012-01-01

Feasible tomography schemes for large particle numbers must possess, besides an appropriate data acquisition protocol, an efficient way to reconstruct the density operator from the observed finite data set. Since state reconstruction typically requires the solution of a nonlinear large-scale opti...... optimization, which has clear advantages regarding speed, control and accuracy in comparison to commonly employed numerical routines. First prototype implementations easily allow reconstruction of a state of 20 qubits in a few minutes on a standard computer.......-scale optimization problem, this is a major challenge in the design of scalable tomography schemes. Here we present an efficient state reconstruction scheme for permutationally invariant quantum state tomography. It works for all common state-of-the-art reconstruction principles, including, in particular, maximum...

Converting Energy Subsidies to Investments: Scaling-Up Deep Energy Retrofit in Residential Sector of Ukraine

Science.gov (United States)

Denysenko, Artur

After collapse of the Soviet Union, Ukraine inherited vast and inefficient infrastructure. Combination of historical lack of transparency, decades without reforms, chronical underinvestment and harmful cross-subsidization resulted in accumulation of energy problems, which possess significant threat to economic prosperity and national security. High energy intensity leads to excessive use of energy and heavy reliance on energy import to meet domestic demand. Energy import, in turn, results in high account balance deficit and heavy burden on the state finances. A residential sector, which accounts for one third of energy consumption and is the highest consumer of natural gas, is particularly challenging to reform. This thesis explores energy consumption of the residential sector of Ukraine. Using energy decomposition method, recent changes in energy use is analyzed. Energy intensity of space heating in the residential sector of Ukraine is compared with selected EU member states with similar climates. Energy efficiency potential is evaluated for whole residential sector in general and for multistory apartment buildings connected to the district heating in particular. Specifically, investments in thermal modernization of multistory residential buildings will result in almost 45TWh, or 3.81 Mtoe, of annual savings. Required investments for deep energy retrofit of multistory buildings is estimated as much as $19 billion in 2015 prices. Experience of energy subsidy reforms as well as lessons from energy retrofit policy from selected countries is analyzed. Policy recommendations to turn energy subsidies into investments in deep energy retrofit of residential sector of Ukraine are suggested. Regional dimension of existing energy subsidies and capital subsidies required for energy retrofit is presented.

Reconstructing Northern Hemisphere upper-level fields during World War II

Energy Technology Data Exchange (ETDEWEB)

Broennimann, S. [Lunar and Planetary Laboratory, University of Arizona, PO Box 210092, Tucson, AZ 85721-0092 (United States); Luterbacher, J. [Institute of Geography, University of Bern, Bern (Switzerland); NCCR Climate, University of Bern, Bern (Switzerland)

2004-05-01

Monthly mean fields of temperature and geopotential height (GPH) from 700 to 100 hPa were statistically reconstructed for the extratropical Northern Hemisphere for the World War II period. The reconstruction was based on several hundred predictor variables, comprising temperature series from meteorological stations and gridded sea level pressure data (1939-1947) as well as a large amount of historical upper-air data (1939-1944). Statistical models were fitted in a calibration period (1948-1994) using the NCEP/NCAR Reanalysis data set as predictand. The procedure consists of a weighting scheme, principal component analyses on both the predictor variables and the predictand fields and multiple regression models relating the two sets of principal component time series to each other. According to validation experiments, the reconstruction skill in the 1939-1944 period is excellent for GPH at all levels and good for temperature up to 500 hPa, but somewhat worse for 300 hPa temperature and clearly worse for 100 hPa temperature. Regionally, high predictive skill is found over the midlatitudes of Europe and North America, but a lower quality over Asia, the subtropics, and the Arctic. Moreover, the quality is considerably better in winter than in summer. In the 1945-1947 period, reconstructions are useful up to 300 hPa for GPH and, in winter, up to 500 hPa for temperature. The reconstructed fields are presented for selected months and analysed from a dynamical perspective. It is demonstrated that the reconstructions provide a useful tool for the analysis of large-scale circulation features as well as stratosphere-troposphere coupling in the late 1930s and early 1940s. (orig.)

Coastal barrier stratigraphy for Holocene high-resolution sea-level reconstruction.

Science.gov (United States)

Costas, Susana; Ferreira, Óscar; Plomaritis, Theocharis A; Leorri, Eduardo

2016-12-08

The uncertainties surrounding present and future sea-level rise have revived the debate around sea-level changes through the deglaciation and mid- to late Holocene, from which arises a need for high-quality reconstructions of regional sea level. Here, we explore the stratigraphy of a sandy barrier to identify the best sea-level indicators and provide a new sea-level reconstruction for the central Portuguese coast over the past 6.5 ka. The selected indicators represent morphological features extracted from coastal barrier stratigraphy, beach berm and dune-beach contact. These features were mapped from high-resolution ground penetrating radar images of the subsurface and transformed into sea-level indicators through comparison with modern analogs and a chronology based on optically stimulated luminescence ages. Our reconstructions document a continuous but slow sea-level rise after 6.5 ka with an accumulated change in elevation of about 2 m. In the context of SW Europe, our results show good agreement with previous studies, including the Tagus isostatic model, with minor discrepancies that demand further improvement of regional models. This work reinforces the potential of barrier indicators to accurately reconstruct high-resolution mid- to late Holocene sea-level changes through simple approaches.

Surgical reconstruction of pelvic floor descent: anatomic and functional aspects.

Science.gov (United States)

Wagenlehner, F M E; Bschleipfer, T; Liedl, B; Gunnemann, A; Petros, P; Weidner, W

2010-01-01

The human pelvic floor is a complex structure and pelvic floor dysfunction is seen frequently in females. This review focuses on the surgical reconstruction of the pelvic floor employing recent findings on functional anatomy. A selective literature research was performed by the authors. Pelvic floor activity is regulated by 3 main muscular forces that are responsible for vaginal tension and suspension of the pelvic floor organs, bladder and rectum. A variety of symptoms can derive from pelvic floor dysfunctions, such as urinary urge and stress incontinence, abnormal bladder emptying, fecal incontinence, obstructive bowel disease syndrome and pelvic pain. These symptoms mainly derive, for different reasons, from laxity in the vagina or its supporting ligaments as a result of altered connective tissue. Pelvic floor reconstruction is nowadays driven by the concept that in case of pelvic floor symptoms, restoration of the anatomy will translate into restoration of the physiology and ultimately improve patients' symptoms. The surgical reconstruction of the anatomy is almost exclusively focused on the restoration of the lax pelvic floor ligaments. Exact preoperative identification of the anatomical lesions is necessary to allow for exact anatomical reconstruction with respect to the muscular forces of the pelvic floor. Copyright 2010 S. Karger AG, Basel.

A novel algorithm of super-resolution image reconstruction based on multi-class dictionaries for natural scene

Science.gov (United States)

Wu, Wei; Zhao, Dewei; Zhang, Huan

2015-12-01

Super-resolution image reconstruction is an effective method to improve the image quality. It has important research significance in the field of image processing. However, the choice of the dictionary directly affects the efficiency of image reconstruction. A sparse representation theory is introduced into the problem of the nearest neighbor selection. Based on the sparse representation of super-resolution image reconstruction method, a super-resolution image reconstruction algorithm based on multi-class dictionary is analyzed. This method avoids the redundancy problem of only training a hyper complete dictionary, and makes the sub-dictionary more representatives, and then replaces the traditional Euclidean distance computing method to improve the quality of the whole image reconstruction. In addition, the ill-posed problem is introduced into non-local self-similarity regularization. Experimental results show that the algorithm is much better results than state-of-the-art algorithm in terms of both PSNR and visual perception.

Three-diemensional materials science: An intersection of three-dimensional reconstructions and simulations

DEFF Research Database (Denmark)

Thornton, Katsuyo; Poulsen, Henning Friis

2008-01-01

The recent development of experimental techniques that rapidly reconstruct the three-dimensional microstructures of solids has given rise to new possibilities for developing a deeper understanding of the evolution of microstructures and the effects of microstructures on materials properties. Comb...... an overview of this emerging field of materials science, as well as brief descriptions of selected methods and their applicability.......The recent development of experimental techniques that rapidly reconstruct the three-dimensional microstructures of solids has given rise to new possibilities for developing a deeper understanding of the evolution of microstructures and the effects of microstructures on materials properties....... Combined with three-dimensional (3D) simulations and analyses that are capable of handling the complexity of these microstructures, 3D reconstruction, or tomography, has become a powerful tool that provides clear insights into materials processing and properties. This introductory article provides...

Cartilage grafting in nasal reconstruction.

Science.gov (United States)

Immerman, Sara; White, W Matthew; Constantinides, Minas

2011-02-01

Nasal reconstruction after resection for cutaneous malignancies poses a unique challenge to facial plastic surgeons. The nose, a unique 3-D structure, not only must remain functional but also be aesthetically pleasing to patients. A complete understanding of all the layers of the nose and knowledge of available cartilage grafting material is necessary. Autogenous material, namely septal, auricular, and costal cartilage, is the most favored material in a free cartilage graft or a composite cartilage graft. All types of material have advantages and disadvantages that should guide the most appropriate selection to maximize the functional and cosmetic outcomes for patients. Copyright © 2011 Elsevier Inc. All rights reserved.

Fast implementations of reconstruction-based scatter compensation in fully 3D SPECT image reconstruction

International Nuclear Information System (INIS)

Kadrmas, Dan J.; Karimi, Seemeen S.; Frey, Eric C.; Tsui, Benjamin M.W.

1998-01-01

Accurate scatter compensation in SPECT can be performed by modelling the scatter response function during the reconstruction process. This method is called reconstruction-based scatter compensation (RBSC). It has been shown that RBSC has a number of advantages over other methods of compensating for scatter, but using RBSC for fully 3D compensation has resulted in prohibitively long reconstruction times. In this work we propose two new methods that can be used in conjunction with existing methods to achieve marked reductions in RBSC reconstruction times. The first method, coarse-grid scatter modelling, significantly accelerates the scatter model by exploiting the fact that scatter is dominated by low-frequency information. The second method, intermittent RBSC, further accelerates the reconstruction process by limiting the number of iterations during which scatter is modelled. The fast implementations were evaluated using a Monte Carlo simulated experiment of the 3D MCAT phantom with 99m Tc tracer, and also using experimentally acquired data with 201 Tl tracer. Results indicated that these fast methods can reconstruct, with fully 3D compensation, images very similar to those obtained using standard RBSC methods, and in reconstruction times that are an order of magnitude shorter. Using these methods, fully 3D iterative reconstruction with RBSC can be performed well within the realm of clinically realistic times (under 10 minutes for 64x64x24 image reconstruction). (author)

In-process 3D geometry reconstruction of objects produced by direct light projection

DEFF Research Database (Denmark)

Andersen, Ulrik Vølcker; Pedersen, David Bue; Hansen, Hans Nørgaard

2013-01-01

al. 2011), this method has shown its potential with 3D printing (3DP) and selective laser sintering additive manufacturing processes, where it is possible to directly capture the geometrical features of each individual layer during a build job using a digital camera. When considering the process...... equipment such as coordinate measuring machines cannot be verified easily. This problem is addressed by developing an in-line reverse engineering and 3D reconstruction method that allows a true-to-scale reconstruction of a part being additively manufactured. In earlier works (Pedersen et al. 2010; Hansen et...

Update on orbital reconstruction.

Science.gov (United States)

Chen, Chien-Tzung; Chen, Yu-Ray

2010-08-01

Orbital trauma is common and frequently complicated by ocular injuries. The recent literature on orbital fracture is analyzed with emphasis on epidemiological data assessment, surgical timing, method of approach and reconstruction materials. Computed tomographic (CT) scan has become a routine evaluation tool for orbital trauma, and mobile CT can be applied intraoperatively if necessary. Concomitant serious ocular injury should be carefully evaluated preoperatively. Patients presenting with nonresolving oculocardiac reflex, 'white-eyed' blowout fracture, or diplopia with a positive forced duction test and CT evidence of orbital tissue entrapment require early surgical repair. Otherwise, enophthalmos can be corrected by late surgery with a similar outcome to early surgery. The use of an endoscope-assisted approach for orbital reconstruction continues to grow, offering an alternative method. Advances in alloplastic materials have improved surgical outcome and shortened operating time. In this review of modern orbital reconstruction, several controversial issues such as surgical indication, surgical timing, method of approach and choice of reconstruction material are discussed. Preoperative fine-cut CT image and thorough ophthalmologic examination are key elements to determine surgical indications. The choice of surgical approach and reconstruction materials much depends on the surgeon's experience and the reconstruction area. Prefabricated alloplastic implants together with image software and stereolithographic models are significant advances that help to more accurately reconstruct the traumatized orbit. The recent evolution of orbit reconstruction improves functional and aesthetic results and minimizes surgical complications.

Online track reconstruction at hadron colliders

International Nuclear Information System (INIS)

Amerio, Silvia; Bettini, Marco; Nicoletto, Marino; Crescioli, Francesco; Bucciantonio, Martina; DELL'ORSO, Mauro; Piendibene, Marco; VOLPI, Guido; Annovi, Alberto; Catastini, Pierluigi; Giannetti, Paola; Lucchesi, Donatella

2010-01-01

Real time event reconstruction plays a fundamental role in High Energy Physics experiments. Reducing the rate of data to be saved on tape from millions to hundreds per second is critical. In order to increase the purity of the collected samples, rate reduction has to be coupled with the capability to simultaneously perform a first selection of the most interesting events. A fast and efficient online track reconstruction is important to effectively trigger on leptons and/or displaced tracks from b-quark decays. This talk will be an overview of online tracking techniques in different HEP environments: we will show how H1 experiment at HERA faced the challenges of online track reconstruction implementing pattern matching and track linking algorithms on CAMs and FPGAs in the Fast Track Processor (FTT). The pattern recognition technique is also at the basis of the Silicon Vertex Trigger (SVT) at the CDF experiment at Tevatron: coupled to a very fast fitting phase, SVT allows to trigger on displaced tracks, thus greatly increasing the efficiency for the hadronic B decay modes. A recent upgrade of the SVT track fitter, the Giga-fitter, can perform more than 1 fit/ns and further improves the CDF online trigger capabilities at high luminosity. At SLHC, where luminosities will be 2 orders of magnitude greater than Tevatron, online tracking will be much more challenging: we will describe CMS future plans for a Level-1 track trigger and the Fast Tracker (FTK) processor at the ATLAS experiment, based on the Giga-fitter architecture and designed to provide high quality tracks reconstructed over the entire detector in time for a Level-2 trigger decision.luminosity. At SLHC, where luminosities will be 2 orders of magnitude greater than Tevatron, online tracking will be much more challenging: we will describe CMS future plans for a Level-1 track trigger and the Fast Tracker (FTK) processor at the Atlas experiment, based on the Giga-fitter architecture and designed to provide high

Unionism Comes to the Public Sector

OpenAIRE

Richard B. Freeman

1984-01-01

This paper argues that public sector labor relations is best understood in a framework that focuses on unions' ability to shift demand curves rather than to raise wages, as is the case in the private sector. It reviews the public sector labor relations literature and finds that: (i) public sector unionism has flourished as a result of changes in laws; (2) the effects of public sector unions on wages are likely to have been underestimated; (3) public sector unions have a somewhat different eff...

Characteristics of occupational musculoskeletal disorders of five sectors in service industry between 2004 and 2013.

Science.gov (United States)

Choi, Hyun-Woo; Kim, Young-Ki; Kang, Dong-Mug; Kim, Jong-Eun; Jang, Bo-Young

2017-01-01

' Work related musculoskeletal disorders (WRMSDs)' have been mostly reported in the manufacturing industry but recently the occurrence of industrial injuries has been constantly increasing in the service industry. This research is going to analyze the data about workers' compensation for WRMSDs in five different service sectors and identify characteristics of occupations with the highest approved occupations. According to the data released from the Korea Worker's Compensation & Welfare Service, the overview of 12,730 cases of workers' compensation for WRMSDs in five service sectors from 2004 to 2013 is going to be analyzed and the source data is going to be classified by the Korean Standard Classification of Occupations to select the top five occupations that have the highest number of approval. After selecting each five occupations from the service sector that have work related musculoskeletal disorders, the result showed that the occupation with the highest number of approval in the health and social care sector were the early childhood educators, cooks in the school canteens in education services sector, garbage collectors in the sanitation and similar services sector, deliverymen in wholesale and retail, consumer goods repair and building cleaners in general management businesses such as those in building maintenance. The major event observed in the top five occupations was the overexertion and reaction as a cause of WRMSDs. The day when the WRMSDs mostly occurred was on Monday and the most likely time was 10 am. The median days away from work and lost working days are 29-90 days and 0-50 days respectively. The difference in each occupation was observed in year of service, age, and gender. 83.21% of the approved cases of workers' compensation for WRMSDs occurred in the top 25 occupations in all of the five service sectors, which meant that the approval of workers' compensation is concentrated in specific occupations. This research is going to suggest

Sectoral Innovation Watch Food and Drinks Sector. Final Sector Report

NARCIS (Netherlands)

Leis, M.; Gijsbers, G.; Zee, F. van der

2011-01-01

The food and drinks manufacturing industry is a diverse and complex sector. There are ample possibilities for performance improvement and innovation in the food and drinks industry as well as a variety of challenges ranging from a lack of financial and human resources, fragmented consumer interests

Configuring Airspace Sectors with Approximate Dynamic Programming

Science.gov (United States)

Bloem, Michael; Gupta, Pramod

2010-01-01

In response to changing traffic and staffing conditions, supervisors dynamically configure airspace sectors by assigning them to control positions. A finite horizon airspace sector configuration problem models this supervisor decision. The problem is to select an airspace configuration at each time step while considering a workload cost, a reconfiguration cost, and a constraint on the number of control positions at each time step. Three algorithms for this problem are proposed and evaluated: a myopic heuristic, an exact dynamic programming algorithm, and a rollouts approximate dynamic programming algorithm. On problem instances from current operations with only dozens of possible configurations, an exact dynamic programming solution gives the optimal cost value. The rollouts algorithm achieves costs within 2% of optimal for these instances, on average. For larger problem instances that are representative of future operations and have thousands of possible configurations, excessive computation time prohibits the use of exact dynamic programming. On such problem instances, the rollouts algorithm reduces the cost achieved by the heuristic by more than 15% on average with an acceptable computation time.

The Financial Crisis and the Management of Change in the Banking Sector

Directory of Open Access Journals (Sweden)

Alexandra Micu

2014-12-01

Full Text Available In the last two decades the banking sector had been facing a series of profound changes. After a significant period of growth and wellbeing, the economy has faced a sudden and severe crisis. The main effect of the economic downturn implied a sharp decrease in the economic activity overall, and in the banking sector in particular, which led to millions of people losing their jobs. The article focuses on this heavily affected branch of the economy, and looks into the most efficient change management methods and turnaround strategies that enabled select organizations to remain competitive and overcome the multiple difficulties caused by the financial crisis.

Systematic Review: Aesthetic Assessment of Breast Reconstruction Outcomes by Healthcare Professionals.

Science.gov (United States)

Maass, Saskia W M C; Bagher, Shaghayegh; Hofer, Stefan O P; Baxter, Nancy N; Zhong, Toni

2015-12-01

Achieving an aesthetic outcome following postmastectomy breast reconstruction is both an important goal for the patient and plastic surgeon. However, there is currently an absence of a widely accepted, standardized, and validated professional aesthetic assessment scale following postmastectomy breast reconstruction. A systematic review was performed to identify all articles that provided professional assessment of the aesthetic outcome following postmastectomy, implant- or autologous tissue-based breast reconstruction. A modified version of the Scientific Advisory Committee's Medical Outcomes Trust (MOT) criteria was used to evaluate all professional aesthetic assessment scales identified by our systematic review. The criteria included conceptual framework formation, reliability, validity, responsiveness, interpretability, burden, and correlation with patient-reported outcomes. A total of 120 articles were identified: 52 described autologous breast reconstruction, 37 implant-based reconstruction, and 29 both. Of the 12 different professional aesthetic assessment scales that exist in the literature, the most commonly used scale was the four-point professional aesthetic assessment scale. The highest score on the modified MOT criteria was assigned to the ten-point professional aesthetic assessment scale. However, this scale has limited clinical usefulness due to its poor responsiveness to change, lack of interpretability, and wide range of intra- and inter-rater agreements (Veiga et al. in Ann Plast Surg 48(5):515-520, 2002). A "gold standard" professional aesthetic assessment scale needs to be developed to enhance the comparability of breast reconstruction results across techniques, surgeons, and studies to aid with the selection of procedures that produce the best aesthetic results from both the perspectives of the surgeon and patients.

Reconstructing school segregation: on the efficacy and equity of single-sex schooling

OpenAIRE

Billger, Sherrilyn M.

2006-01-01

A change to Title IX has spurred new single-sex public schooling in the US. Until recently, nearly all gender-segregated schools were private, and I therefore address potential selection bias in the effects on educational and labor market outcomes using within private sector comparisons, an index comparing expectations to outcomes, quantile regressions, and other techniques. Descriptive statistics suggest significant benefits, but more consideration of selection bias reveals less consistency....

The emerging fourth sector

OpenAIRE

Friis, Andreas

2009-01-01

The Fourth Sector is a new phenomenon related to dual social and financial value creation, until now not clearly defined with crisp sectoral boundaries and an operationalized definition. The phenomenon is getting increased attention in media, conferences, business schools and by organizations all over the world, and this study intends to explain the macroenvironmental changes that led to the rise of the fourth sector, describe new trends of social value creation in the private ...

Private sector participation in the electricity sector : potential and critical issues

International Nuclear Information System (INIS)

Dunsky, I.

2006-01-01

This presentation discussed the development of infrastructure in the electricity sector with particular reference to public-private partnerships and project finance. Emerging markets that encourage private-sector investment were presented along with recommendations to negotiate power purchase agreements involving small-scale hydroelectric power; a thermal power plant at Suroit, Quebec; and, wind energy in Quebec's Gaspe Peninsula. Interconnection to the provincial power grid was also reviewed with reference to the risk faced by the promoters of a project in terms of project design, construction, financing, production and maintenance. The risks faced by Hydro-Quebec were also discussed along with risk allocations between the private and public sectors. tabs., figs

Regional transport sector mitigation options

Energy Technology Data Exchange (ETDEWEB)

Zhou, Peter [EECG Consultants, Gaborone (Botswana)

1998-10-01

The rationale for conducting climate change mitigation studies in the transport sector is on the premise that: The transport sector is the second largest consumer of fossil fuels in the region; The regional transport sector is an area with high opportunity for infrastructural development under UNFCCC financial mechanism; The regional transport sector is crucial in the SADC region for trade and coupled with the Trade Protocol will play a major role in development hence the need to make it efficient in terms of energy demand and provision of services; The sector offers many mitigation options but with a challenge to evaluate their energy saving and GHG saving potential and yet there is need to quantify possible emission reduction for possible future emission trading. This is also a sector with potential to qualify for financing through Clean Development Mechanism (CDM) recently stipulated in the Kyoto Protocol. (au)

Regional transport sector mitigation options

International Nuclear Information System (INIS)

Zhou, Peter

1998-01-01

The rationale for conducting climate change mitigation studies in the transport sector is on the premise that: The transport sector is the second largest consumer of fossil fuels in the region; The regional transport sector is an area with high opportunity for infrastructural development under UNFCCC financial mechanism; The regional transport sector is crucial in the SADC region for trade and coupled with the Trade Protocol will play a major role in development hence the need to make it efficient in terms of energy demand and provision of services; The sector offers many mitigation options but with a challenge to evaluate their energy saving and GHG saving potential and yet there is need to quantify possible emission reduction for possible future emission trading. This is also a sector with potential to qualify for financing through Clean Development Mechanism (CDM) recently stipulated in the Kyoto Protocol. (au)

Frequency-Selective Signal Sensing with Sub-Nyquist Uniform Sampling Scheme

DEFF Research Database (Denmark)

Pierzchlewski, Jacek; Arildsen, Thomas

2015-01-01

In this paper the authors discuss a problem of acquisition and reconstruction of a signal polluted by adjacent- channel interference. The authors propose a method to find a sub-Nyquist uniform sampling pattern which allows for correct reconstruction of selected frequencies. The method is inspired...... by the Restricted Isometry Property, which is known from the field of compressed sensing. Then, compressed sensing is used to successfully reconstruct a wanted signal even if some of the uniform samples were randomly lost, e. g. due to ADC saturation. An experiment which tests the proposed method in practice...

Incomplete projection reconstruction of computed tomography based on the modified discrete algebraic reconstruction technique

Science.gov (United States)

Yang, Fuqiang; Zhang, Dinghua; Huang, Kuidong; Gao, Zongzhao; Yang, YaFei

2018-02-01

Based on the discrete algebraic reconstruction technique (DART), this study aims to address and test a new improved algorithm applied to incomplete projection data to generate a high quality reconstruction image by reducing the artifacts and noise in computed tomography. For the incomplete projections, an augmented Lagrangian based on compressed sensing is first used in the initial reconstruction for segmentation of the DART to get higher contrast graphics for boundary and non-boundary pixels. Then, the block matching 3D filtering operator was used to suppress the noise and to improve the gray distribution of the reconstructed image. Finally, simulation studies on the polychromatic spectrum were performed to test the performance of the new algorithm. Study results show a significant improvement in the signal-to-noise ratios (SNRs) and average gradients (AGs) of the images reconstructed from incomplete data. The SNRs and AGs of the new images reconstructed by DART-ALBM were on average 30%-40% and 10% higher than the images reconstructed by DART algorithms. Since the improved DART-ALBM algorithm has a better robustness to limited-view reconstruction, which not only makes the edge of the image clear but also makes the gray distribution of non-boundary pixels better, it has the potential to improve image quality from incomplete projections or sparse projections.

Low-dose X-ray CT reconstruction via dictionary learning.

Science.gov (United States)

Xu, Qiong; Yu, Hengyong; Mou, Xuanqin; Zhang, Lei; Hsieh, Jiang; Wang, Ge

2012-09-01

Although diagnostic medical imaging provides enormous benefits in the early detection and accuracy diagnosis of various diseases, there are growing concerns on the potential side effect of radiation induced genetic, cancerous and other diseases. How to reduce radiation dose while maintaining the diagnostic performance is a major challenge in the computed tomography (CT) field. Inspired by the compressive sensing theory, the sparse constraint in terms of total variation (TV) minimization has already led to promising results for low-dose CT reconstruction. Compared to the discrete gradient transform used in the TV method, dictionary learning is proven to be an effective way for sparse representation. On the other hand, it is important to consider the statistical property of projection data in the low-dose CT case. Recently, we have developed a dictionary learning based approach for low-dose X-ray CT. In this paper, we present this method in detail and evaluate it in experiments. In our method, the sparse constraint in terms of a redundant dictionary is incorporated into an objective function in a statistical iterative reconstruction framework. The dictionary can be either predetermined before an image reconstruction task or adaptively defined during the reconstruction process. An alternating minimization scheme is developed to minimize the objective function. Our approach is evaluated with low-dose X-ray projections collected in animal and human CT studies, and the improvement associated with dictionary learning is quantified relative to filtered backprojection and TV-based reconstructions. The results show that the proposed approach might produce better images with lower noise and more detailed structural features in our selected cases. However, there is no proof that this is true for all kinds of structures.

BES-II fast data reconstruction

International Nuclear Information System (INIS)

Rong Gang; Zhang Jiawen; Guo Yiqing; Zhang Shaoqiang; Zhao Dixin

2002-01-01

The BES-II fast data reconstruction is reported. Based on PC FARM and/or a 'Distributed Clustered Linux PC System', BES-II fast data reconstruction system is set up. With this system the BES-II data can be fully reconstructed in about 20 minutes after data collection. It takes only 12 minutes to fully reconstruct 30000 events, collected with BES-II detector at BEPC Collider, with a P III-800 PC. The detector performance can be examined based on fully reconstructed data in about 20 minutes after data taking in the BES-II experiment

76 FR 31211 - Privacy Act of 1974; System of Records

Science.gov (United States)

2011-05-27

...; (8) bio-accumulating non-carcinogen agents; (9) chronic vascular disease- causing agents; and (10) ionizing radiation. Also included are those individuals in the general population who have been selected as... private- sector employers to permit these entities to retrieve records required to reconstruct radiation...

SEGEBERG 1600 – RECONSTRUCTING A HISTORIC TOWN FOR VIRTUAL REALITY VISUALISATION AS AN IMMERSIVE EXPERIENCE

Directory of Open Access Journals (Sweden)

S. Deggim

2017-11-01

Full Text Available The 3D reconstruction of historic buildings and cities offers an opportunity to experience the history of relevant objects and their development over the centuries. Digital visualisations of such historic objects allow for a more natural view of history as well as showing information that is not possible in a real world setting. New presentation forms, such as the virtual reality (VR system HTC Vive, can be used to disseminate information in another dimension and simplify the access by changing the user’s viewpoint from a listener and viewer into being an integrated part of an interactive situation. In general, this approach is a combination of education and entertainment, also known as “edutainment” or “gamification”, a term used in the education sector as describing where motivation to learn is encouraged through adding a competitive element. It is thus a step away from simple consumption of information towards experiencing information and a more literal interpretation of “living history”. In this contribution, we present the development of a 3D reconstruction of the two towns Segeberg and Gieschenhagen (today: Bad Segeberg in Schleswig-Holstein, Germany in the Early Modern Age around 1600. The historic landscape and its conversion from a reconstructed virtual town model into an interactive VR application is also described. The reconstruction is based on a recent digital terrain model as well as survey data of surviving buildings, historic visual information based on historic drawings and written accounts from that era. All datasets are combined to a single walkable virtual world that spans approximately 3 km².

Reconstruction of the Lower Extremity Using Free Flaps

Directory of Open Access Journals (Sweden)

Min Jo Kang

2013-09-01

Full Text Available BackgroundThe aim of lower-extremity reconstruction has focused on wound coverage and functional recovery. However, there are limitations in the use of a local flap in cases of extensive defects of the lower-extremities. Therefore, free flap is a useful option in lower-extremity reconstruction.MethodsWe performed a retrospective review of 49 patients (52 cases who underwent lower-extremity reconstruction at our institution during a 10-year period. In these patients, we evaluated causes and sites of defects, types of flaps, recipient vessels, types of anastomosis, survival rate, and complications.ResultsThere were 42 men and 10 women with a mean age of 32.7 years (range, 3-72 years. The sites of defects included the dorsum of the foot (19, pretibial area (17, ankle (7, heel (5 and other sites (4. The types of free flap included latissimus dorsi muscle flap (10, scapular fascial flap (6, anterolateral thigh flap (6, and other flaps (30. There were four cases of vascular complications, out of which two flaps survived after intervention. The overall survival of the flaps was 96.2% (50/52. There were 19 cases of other complications at recipient sites such as partial graft loss (8, partial flap necrosis (6 and infection (5. However, these complications were not notable and were resolved with skin grafts.ConclusionsThe free flap is an effective method of lower-extremity reconstruction. Good outcomes can be achieved with complete debridement and the selection of appropriate recipient vessels and flaps according to the recipient site.

Nipple-sparing mastectomy with immediate implant reconstruction: cosmetic outcomes and technical refinements.

Science.gov (United States)

Salgarello, Marzia; Visconti, Giuseppe; Barone-Adesi, Liliana

2010-11-01

Nipple-sparing mastectomy is gaining widespread popularity, as it could allow improved aesthetic outcome without increasing oncologic risk. To investigate the reconstructive issues experienced with immediate implant reconstruction, the authors reviewed the cosmetic outcomes of their series. The authors retrospectively analyzed the data on 33 cases of nipple-sparing mastectomy for both cancer and prophylaxis with immediate implant reconstruction using the submusculo-subfascial pocket. Cosmetic evaluation methods were clinical and photography-based assessments and a patient-satisfaction survey. The average follow-up period was 26.8 months. No nipple-areola complex cancer involvement was registered. The reconstructive outcomes ranged from good to excellent in 83 percent of the cases. Patients' satisfaction was high to very high, except in one patient who experienced total nipple-areola complex loss (one breast, 2.4 percent). Overall, early minor complications were registered in four breasts (9.5 percent) and late minor complications in five cases (12 percent). The authors' series suggest that nipple-sparing mastectomy is an option for carefully selected and screened patients. Larger studies with longer follow-up are needed, however. On the whole, the immediate one-stage implant reconstruction with hyperprojected anatomical gel implants represents a valid option. The skin incision algorithm proposed, which is based on the breast size, shape, and previous scars, might aid in the decision-making process to achieve satisfying results using this procedure. The radial approaches represent a good compromise between the oncologic and reconstructive procedures.

Significant components of service brand equity in healthcare sector.

Science.gov (United States)

Chahal, Hardeep; Bala, Madhu

2012-01-01

The purpose of the study is to examine three significant components of service brand equity--i.e. perceived service quality, brand loyalty, and brand image--and analyze relationships among the components of brand equity and also their relationship with brand equity, which is still to be theorized and developed in the healthcare literature. Effective responses were received from 206 respondents, selected conveniently from the localities of Jammu city. After scale item analysis, the data were analyzed using factor analysis, correlations, t-tests, multiple regression analysis and path modeling using SEM. The findings of the study support that service brand equity in the healthcare sector is greatly influenced by brand loyalty and perceived quality. However, brand image has an indirect effect on service brand equity through brand loyalty (mediating variable). The research can be criticized on the ground that data were selected conveniently from respondents residing in the city of Jammu, India. But at the same time the respondents were appropriate for the study as they have adequate knowledge about the hospitals, and were associated with the selected hospital for more than four years. Furthermore, the validity and reliability of the data are strong enough to take care of the limitations of the convenience sampling selection method. The study has unique value addition to the service marketing vis-à-vis healthcare literature, from both theoretical and managerial perspectives. The study establishes a direct and significant relationship between service brand equity and its two components, i.e. perceived service quality and brand loyalty in the healthcare sector. It also provides directions to healthcare service providers in creating, enhancing, and maintaining service brand equity through service quality and brand loyalty, to sustain competitive advantage.

Recipient vessel selection in immediate breast reconstruction with free abdominal tissue transfer after nipple-sparing mastectomy.

Science.gov (United States)

Yang, Sung Jun; Eom, Jin Sup; Lee, Taik Jong; Ahn, Sei Hyun; Son, Byung Ho

2012-05-01

Nipple-sparing mastectomy (NSM) is gaining popularity due to its superior aesthetic results. When reconstructing the breast with free abdominal tissue transfer, we must readdress the recipient vessel, because NSM can cause difficulty in access to the chest vessel. Between June 2006 and March 2011, a total of 92 women underwent NSM with free abdominal tissue transfer. A lateral oblique incision was used for the nipple-sparing mastectomy. For recipient vessels, the internal mammary vessels were chosen if the mastectomy flap did not block access to the vessels. If it did, the thoracodorsal vessels were used. Age, degree of breast ptosis, weight of the mastectomy specimen, and related complications of the internal mammary vessel group and the thoracodorsal vessel group were compared. Thoracodorsal vessels were used as recipient vessels in 59 cases, and internal mammary vessels in 33 cases including 4 cases with perforators of the internal mammary vessels. Breast reconstruction was successful in all cases except one case involving a total flap failure, which was replaced by a silicone gel implant. The internal mammary group and the thoracodorsal group were similar in terms of age, height, breast weight, and degree of ptosis. The flap related complications such as flap loss and take-back operation rates were not significantly different between the two groups. The rate of nipple necrosis was higher in the internal mammary group. The thoracodorsal vessels could produce comparable outcomes in breast reconstruction after nipple-sparing mastectomies. If access to internal mammary vessels is difficult, the thoracodorsal vessel can be a better choice.

Recipient Vessel Selection in Immediate Breast Reconstruction with Free Abdominal Tissue Transfer after Nipple-Sparing Mastectomy

Directory of Open Access Journals (Sweden)

Sung Jun Yang

2012-05-01

Full Text Available BackgroundNipple-sparing mastectomy (NSM is gaining popularity due to its superior aesthetic results. When reconstructing the breast with free abdominal tissue transfer, we must readdress the recipient vessel, because NSM can cause difficulty in access to the chest vessel.MethodsBetween June 2006 and March 2011, a total of 92 women underwent NSM with free abdominal tissue transfer. A lateral oblique incision was used for the nipple-sparing mastectomy. For recipient vessels, the internal mammary vessels were chosen if the mastectomy flap did not block access to the vessels. If it did, the thoracodorsal vessels were used. Age, degree of breast ptosis, weight of the mastectomy specimen, and related complications of the internal mammary vessel group and the thoracodorsal vessel group were compared.ResultsThoracodorsal vessels were used as recipient vessels in 59 cases, and internal mammary vessels in 33 cases including 4 cases with perforators of the internal mammary vessels. Breast reconstruction was successful in all cases except one case involving a total flap failure, which was replaced by a silicone gel implant. The internal mammary group and the thoracodorsal group were similar in terms of age, height, breast weight, and degree of ptosis. The flap related complications such as flap loss and take-back operation rates were not significantly different between the two groups. The rate of nipple necrosis was higher in the internal mammary group.ConclusionsThe thoracodorsal vessels could produce comparable outcomes in breast reconstruction after nipple-sparing mastectomies. If access to internal mammary vessels is difficult, the thoracodorsal vessel can be a better choice.

Public sector leadership: Transforming the market for efficient products and services

Energy Technology Data Exchange (ETDEWEB)

Harris, Jeffrey [Lawrence Berkeley National Laboratory, CA (United States); Aebischer, Bernard [Swiss Federal Inst. of Technology, Zurich (Switzerland); Glickman, Joan [Federal Energy Management Program, Washington, DC (United States); Magnin, Gerard [Energie-Cites, Besancon (France); Meier, Alan [International Energy Agency, Paris (France); Viegand, Jan [Jan Viegand Analysis and Information, Copenhagen (Denmark)

2005-07-01

The public sector represents a significant share of all economic activity (15-25%) in Europe's industrial and transition economies. Government agencies, often the largest energy users and the biggest buyers of energy-using equipment, have significant potential to reduce energy use in their facilities and operations, while also saving taxpayer dollars and avoiding emissions of air pollutants and greenhouse gases. Public sector leadership can be the first step toward market transformation, as government creates entry markets and sets an example for other sectors to adopt efficient technologies and practices. While public sector energy efficiency has not been highlighted in EU or IEA policy compilations, many government agencies from the national to the municipal level have acted to reduce their own energy use, stimulate market demand, and provide an example to others through intergovernmental networking. Several EU projects have addressed the use of government buying power to help commercialize new technologies and to increase the market share of efficient appliances. However, additional steps are needed in order to establish public sector energy efficiency as a core element of energy and climate change policy in Europe. Based on a selected review of public sector energy efficiency activities in the EU we define five program categories: Policies and targets (energy/cost savings; pollution/CO{sub 2} reductions; measurement and verification; tracking and reporting); Public buildings (energy-saving retrofit and operation of existing facilities, as well as sustainability in new construction); Energy-efficient government procurement; Efficiency and renewable energy use in public infrastructure (transit, roads, water, and other public services); Information, training, incentives, and recognition of leadership by agencies and individuals; We discuss examples of program success, lessons learned, and future initiatives to strengthen these activities through increased

Public sector leadership: Transforming the market for efficient products and services

International Nuclear Information System (INIS)

Harris, Jeffrey; Aebischer, Bernard; Glickman, Joan; Magnin, Gerard; Meier, Alan; Viegand, Jan

2005-01-01

The public sector represents a significant share of all economic activity (15-25%) in Europe's industrial and transition economies. Government agencies, often the largest energy users and the biggest buyers of energy-using equipment, have significant potential to reduce energy use in their facilities and operations, while also saving taxpayer dollars and avoiding emissions of air pollutants and greenhouse gases. Public sector leadership can be the first step toward market transformation, as government creates entry markets and sets an example for other sectors to adopt efficient technologies and practices. While public sector energy efficiency has not been highlighted in EU or IEA policy compilations, many government agencies from the national to the municipal level have acted to reduce their own energy use, stimulate market demand, and provide an example to others through intergovernmental networking. Several EU projects have addressed the use of government buying power to help commercialize new technologies and to increase the market share of efficient appliances. However, additional steps are needed in order to establish public sector energy efficiency as a core element of energy and climate change policy in Europe. Based on a selected review of public sector energy efficiency activities in the EU we define five program categories: Policies and targets (energy/cost savings; pollution/CO 2 reductions; measurement and verification; tracking and reporting); Public buildings (energy-saving retrofit and operation of existing facilities, as well as sustainability in new construction); Energy-efficient government procurement; Efficiency and renewable energy use in public infrastructure (transit, roads, water, and other public services); Information, training, incentives, and recognition of leadership by agencies and individuals; We discuss examples of program success, lessons learned, and future initiatives to strengthen these activities through increased recognition

The gas market and sector in France. Situation and predictions 2018 - Sector and competitive analysis

International Nuclear Information System (INIS)

2017-01-01

Through a detailed analysis of market determining factors, of evolutions of supply and demand, and of major events in firms life, this set of two reports proposes an analysis of the recent situation of the gas sector and of the evolutions of the competitive game. The first report on situation and predictions which is updated three times a year, proposes a synthesis on the consequences of the evolution of the economic environment, on major trends noticed for the sector, and on predictable evolutions. It proposes the most recent predictions regarding natural gas consumption in France and the turnover of the gas sector. It highlights recent events for companies of the sector: takeovers, investments, restructuring, introduction of new products, and so on. It proposes a sector-based dashboard which contains all the critical figures useful to analyse the sector situation (activity determining factors, key figures for the sector and its environment). The second report (the annual one) proposes an overview of trends and competition within the gas sector. It gives an overview of some basic aspects of the activity (sector organisation, gas categories, main customer markets, gas consumption in industry), and of its determining factors, analyses the sector environment (sites connected to the natural gas network, evolution of average temperatures in France, production by chemical industry, by the food industry, and by metallurgy and oil refining, thermal production of electricity, regulatory evolution regarding supports to energy efficiency, and new opportunities). The evolution of the sector activity is analysed through its trends and indicators (turnovers, gas consumption, butane-propane deliveries, wholesale prices, regulated tariffs). The economic structure is also analysed: aspects related to the upstream part (extraction, injection of biogas, natural gas main input and output points, transport and storage, natural gas distribution), and aspects related to gas provision

Sectoral Innovation Watch Retail and Wholesale Trade Sector. Final sector report

NARCIS (Netherlands)

Schaffers, H.; Rubalcaba, L.; Merino, F.; Giesecke, S.; Schaper-Rinkel, P.; Velsing, E.J.; Montalvo, C.

2011-01-01

The retail and wholesale trade sector traditionally is considered as a poor innovator. Innovation is seen as driven mostly by applications of information and communication technology (ICT). This report adopts a more comprehensive definition of innovation than the traditional one, taking into account

Large R jet reconstruction and calibration at 13 TeV with the ATLAS detector

CERN Document Server

Taenzer, Joe; The ATLAS collaboration

2017-01-01

Large-R jets are used by many ATLAS analyses working in boosted regimes. ATLAS Large-R jets are reconstructed from locally callibrated calorimeter topoclusters with the Anti-k_{t} algorithm with radius parameter R=1.0, and then groomed to remove pile-up with the trimming algorithm with f_{cut} 0.05 and subjet radius R=0.2. Monte Carlo based energy and mass calibrations correct the reconstructed jet energy and mass to truth, followed by in-situ calibrations using a number of different techniques. Large-R jets can also be reconstructed using small-R jets as constituents, instead of topoclusters, a technique called jet reclustering, or from track calo clusters (TCCs), which are constituents constructed using both tracking and calorimeter information. An overview of large-R jet reconstruction will be presented here, along with selected results from the jet mass calibrations, both Monte Carlo based an insitu, from jet reclustering, and from track calo clusters.

Intermediate view reconstruction using adaptive disparity search algorithm for real-time 3D processing

Science.gov (United States)

Bae, Kyung-hoon; Park, Changhan; Kim, Eun-soo

2008-03-01

In this paper, intermediate view reconstruction (IVR) using adaptive disparity search algorithm (ASDA) is for realtime 3-dimensional (3D) processing proposed. The proposed algorithm can reduce processing time of disparity estimation by selecting adaptive disparity search range. Also, the proposed algorithm can increase the quality of the 3D imaging. That is, by adaptively predicting the mutual correlation between stereo images pair using the proposed algorithm, the bandwidth of stereo input images pair can be compressed to the level of a conventional 2D image and a predicted image also can be effectively reconstructed using a reference image and disparity vectors. From some experiments, stereo sequences of 'Pot Plant' and 'IVO', it is shown that the proposed algorithm improves the PSNRs of a reconstructed image to about 4.8 dB by comparing with that of conventional algorithms, and reduces the Synthesizing time of a reconstructed image to about 7.02 sec by comparing with that of conventional algorithms.

Do sector-specific shocks explain aggregate fluctuations?

DEFF Research Database (Denmark)

Busato, Francesco; Girardi, Alessandro; Argentiero, Amedeo

-sector productivity fluctuations.(ii) Cross-sector technology shocks have very little explanatory power on productivity andemployment, while cross-sector non-technology shocks explain more than 60 percent of employmentthat is reallocated across sector; this suggests that the shocks’ transmission mechanism....... Thenon-durable sector may follow a standard RBC model, while the durable sector should incorporateconsumption habit formation....

Reengineering of MeSH thesauri for term selection to optimize literature retrieval and knowledge reconstruction in support of stem cell research.

Science.gov (United States)

Su, Yan; Andrews, James; Huang, Hong; Wang, Yue; Kong, Liangliang; Cannon, Peter; Xu, Ping

2016-05-23

PubMed is a widely used database for scientists to find biomedical-related literature. Due to the complexity of the selected research subject and its interdisciplinary nature, as well as the exponential growth in the number of disparate pieces of biomedical literature, it is an overwhelming challenge for scientists to define the right search strategies and quickly locate all related information. Specialized subsets and groupings of controlled vocabularies, such as Medical Subject Headings (MeSH), can enhance information retrieval in specialized domains, such as stem cell research. There is a need to develop effective search strategies and convenient solutions for knowledge organization in stem cell research. The understanding of the interrelationships between these MeSH terms also facilitates the building of knowledge organization systems in related subject fields. This study collected empirical data for MeSH-related terms from stem cell literature and developed a novel approach that uses both automation and expert-selection to create a set of terms that supports enhanced retrieval. The selected MeSH terms were reconstructed into a classified thesaurus that can guide researchers towards a successful search and knowledge organization of stem cell literature. First, 4253 MeSH terms were harvested from a sample of 5527 stem cell related research papers from the PubMed database. Next, unrelated terms were filtered out based on term frequency and specificity. Precision and recall measures were used to help identify additional valuable terms, which were mostly non-MeSH terms. The study identified 15 terms that specifically referred to stem cell research for information retrieval, which would yield a higher precision (97.7 %) and recall (94.4 %) rates in comparison to other approaches. In addition, 128 root MeSH terms were selected to conduct knowledge organization of stem cell research in categories of anatomy, disease, and others. This study presented a novel strategy

Perceptions of the Third Sector

NARCIS (Netherlands)

Bekkers, R.H.F.P.; Brink Lund, A.

2014-01-01

How do citizens in Europe view third sector organizations? How can differences in perceptions of the third sector among citizens in Europe be explained? And how is the third sector assessed therein with regard to its contribution to social innovation? Based on the limited scope of the evidence

Evaluation of aortocoronary bypass graft patency by reconstructed CT image

International Nuclear Information System (INIS)

Kawakita, Seizaburo; Koide, Takashi; Saito, Yoshio; Yamamoto, Tadao; Iwasaki, Tadaaki

1982-01-01

Ten patients were examined in the period of three months from January to March 1981. The patients were operated from 1 month to 7 years before CT. A bypass to the left anterior descending artery (LAD) was grafted in 10 cases, 2 to the right coronary artery (RCA), 4 to an obtuse marginal artery (OM), and 1 to a diagonal artery. Image reconstruction was performed in 10 cases by using an image analytical computer Evaluskop. Appropriate planes for reconstruction were selected by trial and error methods upon observation of CT images. When gained picture of a graft course coincided with surgical records or angiography, the work of building images was concluded. On cross section, grafts to LAD were visualized in all 10 cases: 9 in the entire course and 1 in a proximal part of the graft. Two to RCA, 4 to OM and 1 to a diagonal were also successfully visualized. Reconstruction of graft images succeeded in 9 grafts of 6 cases. The course of a graft could be pursued from the proximal to the distal end adjacent to the cardiac chamber. The picture of a bypass to LAD was visualized in 6 of 10 grafts. Two bypass to RCA could be depicted, and 1 to OM was also found. However 3 to OM and 1 to a diagonal failed to be visualized throughout their courses in reconstructed images. I think that the causes of faillure mainly depended upon the course of the graft. When a graft was running arc-like surrounding the heart chamber, it was very difficult to depict its entire length in reconstructed images, though the graft could be detected in cross sections. These preliminary studies indicated that reconstruction of CT images had some benefits for the pursuit of graft courses. (J.P.N.)

Bureaucratic reform, informal sector and welfare

OpenAIRE

Chaudhuri, Sarbajit; Mandal, Biswajit

2012-01-01

In this paper we formulate a three-sector general equilibrium model where one sector produces a service or good used as an intermediate input in two other sectors. Intermediate input here resembles bureaucratic (in)efficiency/control, red-tapism etc. in light of these concerns we introduce informal sector where wage is determined through competitive mechanism. We show that informal wage must go up if bureaucratic efficiency increases in general or if informal sector becomes less prone to bure...

Clinical outcome in MPFL reconstruction with and without tuberositas transposition.

Science.gov (United States)

Mulliez, A; Lambrecht, D; Verbruggen, D; Van Der Straeten, C; Verdonk, P; Victor, J

2017-09-01

There are several surgical options for recurrent patella dislocations. As the reconstruction of the medial patellofemoral ligament (MPFL) has been proven to restore stability, it has become more accepted. Aim of this study was to investigate the clinical outcome after MPFL reconstruction as an isolated procedure or in association with a transposition of the tibial tubercle (in case of patella alta or an excessive TT-TG) in a large prospective cohort study. Additionally, the effect on patellar height was analysed radiographically using the Caton-Deschamps index. In a large prospective cohort study of 129 knees in 124 patients (81 females, 48 males, mean age 22.8 ± 7.7 years), 91 knees received primary MPFL reconstruction (group 1) and 38 were a combination with a transposition of the tibial tubercle (group 2). The clinical follow-up was evaluated using KOOS and Kujala scores preoperatively and 1 year postoperatively. Patient satisfaction, complications and revision surgery were recorded. Overall, Kujala improved significantly from 53.5 (SD 22.7) preoperatively to 74.7 (SD 20.5) postoperatively (p < 0.01). All KOOS subdomains improved significantly (p < 0.01). No significant difference for Kujala score between groups was noticed. Revision rate was (5/129) 3.9 %. Reconstruction was supplemented with a transfer of the tibial tuberosity in (38/129) 29.4 % of the cases and shows a comparable outcome. MPFL reconstruction is a viable treatment option for episodic patellar dislocation. A concomitant tuberositas transposition is useful in selected patients. I.

Probing the dark sector through mono-Z boson leptonic decays

Science.gov (United States)

Yang, Daneng; Li, Qiang

2018-02-01

Collider search for dark matter production has been performed over the years based on high p T standard model signatures balanced by large missing transverse energy. The mono-Z boson production with leptonic decay has a clean signature with the advantage that the decaying electrons and muons can be precisely measured. This signature not only enables reconstruction of the Z boson rest frame, but also makes possible recovery of the underlying production dynamics through the decaying lepton angular distribution. In this work, we exploit full information carried by the leptonic Z boson decays to set limits on coupling strength parameters of the dark sector. We study simplified dark sector models with scalar, vector, and tensor mediators and observe among them different signatures in the distribution of angular coefficients. Specifically, we show that angular coefficients can be used to distinguish different scenarios of the spin-0 and spin-1 models, including the ones with parity-odd and charge conjugation parity-odd operators. To maximize the statistical power, we perform a matrix element method study with a dynamic construction of event likelihood function. We parametrize the test statistic such that sensitivity from the matrix element is quantified through a term measuring the shape difference. Our results show that the shape differences provide significant improvements in the limits, especially for the scalar mediator models. We also present an example application of a matrix-element-kinematic-discriminator, an easier approach that is applicable for experimental data.

Transducer selection and application in magnetoacoustic tomography with magnetic induction

International Nuclear Information System (INIS)

Zhou, Yuqi; Wang, Jiawei; Ma, Qingyu; Sun, Xiaodong; Zhang, Dong

2016-01-01

As an acoustic receiver, transducer plays a vital role in signal acquisition and image reconstruction for magnetoacoustic tomography with magnetic induction (MAT-MI). In order to optimize signal acquisition, the expressions of acoustic pressure detection and waveform collection are theoretically studied based on the radiation theory of acoustic dipole and the reception pattern of transducer. Pressure distributions are simulated for a cylindrical phantom model using a planar piston transducer with different radii and bandwidths. The proposed theory is also verified by the experimental measurements of acoustic waveform detection for an aluminum foil cylinder. It is proved that acoustic pressure with sharp and clear boundary peaks can be detected by the large-radius transducer with wide bandwidth, reflecting the differential of the induced Lorentz force accurately, which is helpful for precise conductivity reconstruction. To detect acoustic pressure with acceptable pressure amplitude, peak pressure ratio, amplitude ratio, and improved signal to noise ratio, the scanning radius of 5–10 times the radius of the object should be selected to improve the accuracy of image reconstruction. This study provides a theoretical and experimental basis for transducer selection and application in MAT-MI to obtain reconstructed images with improved resolution and definition.

Transducer selection and application in magnetoacoustic tomography with magnetic induction

Energy Technology Data Exchange (ETDEWEB)

Zhou, Yuqi; Wang, Jiawei; Ma, Qingyu, E-mail: maqingyu@njnu.edu.cn [Key Laboratory of Optoelectronics of Jiangsu Province, School of Physics and Technology, Nanjing Normal University, Nanjing 210023 (China); Sun, Xiaodong [China Key System & Integrated Circuit Co., Ltd., Wuxi 214072 (China); Zhang, Dong [Laboratory of Modern Acoustics of MOE, Institute of Acoustics, Nanjing University, Nanjing 210093 (China)

2016-03-07

As an acoustic receiver, transducer plays a vital role in signal acquisition and image reconstruction for magnetoacoustic tomography with magnetic induction (MAT-MI). In order to optimize signal acquisition, the expressions of acoustic pressure detection and waveform collection are theoretically studied based on the radiation theory of acoustic dipole and the reception pattern of transducer. Pressure distributions are simulated for a cylindrical phantom model using a planar piston transducer with different radii and bandwidths. The proposed theory is also verified by the experimental measurements of acoustic waveform detection for an aluminum foil cylinder. It is proved that acoustic pressure with sharp and clear boundary peaks can be detected by the large-radius transducer with wide bandwidth, reflecting the differential of the induced Lorentz force accurately, which is helpful for precise conductivity reconstruction. To detect acoustic pressure with acceptable pressure amplitude, peak pressure ratio, amplitude ratio, and improved signal to noise ratio, the scanning radius of 5–10 times the radius of the object should be selected to improve the accuracy of image reconstruction. This study provides a theoretical and experimental basis for transducer selection and application in MAT-MI to obtain reconstructed images with improved resolution and definition.

Responsible leader behavior in health sectors.

Science.gov (United States)

Longest, Beaufort

2017-02-06

Purpose The purpose of this paper is to expand attention to responsible leader behavior in the world's health sectors by explaining how this concept applies to health sectors, considering why health sector leaders should behave responsibly, reviewing how they can do so, and asserting potential impact through an applied example. Design/methodology/approach This paper is a viewpoint, reflecting conceptualizations rooted in leadership literature which are then specifically applied to health sectors. A definition of responsible leader behavior is affirmed and applied specifically in health sectors. Conceptualizations and viewpoints about practice of responsible leader behavior in health sectors and potential consequences are then discussed and asserted. Findings Leadership failures and debacles found in health, but more so in other sectors, have led leadership researchers to offer insights, many of them empirical, into the challenges of leadership especially by more clearly delineating responsible leader behavior. Practical implications Much of what has been learned in the research about responsible leader behavior offers pathways for health sector leaders to more fully practice responsible leadership. Social implications This paper asserts and provides a supporting example that greater levels of responsible leader behavior in health sectors hold potentially important societal benefits. Originality/value This paper is the first to apply emerging conceptualizations and early empirical findings about responsible leader behavior specifically to leaders in health sectors.

Sector Information Data Set

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Fishing sectors were established in the Greater Atlantic region in 2010 under catch share management initiatives. Sector data kept at GARFO is mostly a collection of...

Cyclooxygenase-2 inhibitors and free flap complications after autologous breast reconstruction

DEFF Research Database (Denmark)

Bonde, Christian; Khorasani, Hoda; Hoejvig, Jens

2017-01-01

BACKGROUND: A key component of modern analgesics is the use of multimodal opioid-sparing analgesia (MOSA). In the past, our analgesic regime after autologous breast reconstruction (ABR) included either NSAID or a selective cyclooxygenase-2 (COX-2) inhibitor. COX-2 inhibitors are superior to NSAID...... or gastrointestinal bleeding. CONCLUSIONS: Multimodal analgesia using a COX-2 inhibitor is safe in ABR with free flaps and does not increase flap failure. COX-2 inhibitors seem superior to NSAID with reduced risk of post-operative haematomas.......BACKGROUND: A key component of modern analgesics is the use of multimodal opioid-sparing analgesia (MOSA). In the past, our analgesic regime after autologous breast reconstruction (ABR) included either NSAID or a selective cyclooxygenase-2 (COX-2) inhibitor. COX-2 inhibitors are superior to NSAIDs...... because of the well-known side effects of NSAID treatment (bleeding/gastrointestinal ulcers). However, COX-2 inhibitors have been suggested to increase flap failure rates. We report our experience in using COX-2 inhibitors as part of our post-operative MOSA after ABR using free flaps. MATERIALS...

Public sector pay in the UK

OpenAIRE

Cribb, Jonathan; Emmerson, Carl; Sibieta, Luke

2014-01-01

This report looks at trends in public sector pay and compares these with what has been happening in the private sector. We start by analysing the overall levels of public and private sector pay, including how they have evolved over recent years and the differences after accounting for the different composition of the public and private sector workforces. We then examine how the difference between pay in the public and private sector varies across different groups of workers and areas of the c...

Sectoral Innovation Foresight. Electrical and Optical Equipment Sector. Final report. Task 2

NARCIS (Netherlands)

Broek, T. van den; Giessen, A.M. van der

2010-01-01

The goal of this study is to highlight possible future developments of importance to the electrical and optical (E&O) equipment sector, paying particular importance to ‘radical’ changes and discussing policy options and future scenarios. The electrical & optical equipment sector plays a vital role

An evaluation of the public sector optometric service provided within the health districts in KwaZulu-Natal, South Africa

Directory of Open Access Journals (Sweden)

Moraka E. Maake

2018-04-01

Full Text Available Background: In South Africa, optometry has been traditionally positioned within the private sector. The situation has gradually changed over the past two decades, with optometry being introduced into the public sector in many parts of the country. Despite the growing numbers, optometrists are still new within the public health sector, motivating this study to evaluate the eye care services they provide. Methods: A cross-sectional, retrospective, descriptive study was undertaken. Stratified random selection was applied to select the study sites, and systematic sampling was used to select patients’ files. A saturated sample of public sector optometrists employed in the selected districts completed study questionnaires. Data were analysed using the Statistical Package for Social Sciences, Version 21. Results: A total of 2968 records were reviewed, and gender distribution was 67.6% female and 32.4% male. Refraction (86.73% was the most frequently conducted test, followed by ophthalmoscopy (74.73%, colour vision (0.07% and gonioscopy (0.03%. The response rate for the questionnaires was 64.7%. Optometric outreach services were conducted by 54.5% of optometrists, and the majority (83.3% reported that the farthest outreach facility was more than 50 km from their base hospital. The availability of equipment at outreach facilities was less as compared to base hospitals, while some reported not having the necessary equipment even at base hospitals. None of the optometrists did contact lens fitting at outreach facilities. A lack of equipment was cited as one of the reasons for not providing this service by 100% of optometrists. Most optometrists (63.6% believed that more than 30% of their referrals might have been avoided if they had prescribed therapeutic agents to manage ocular conditions. Conclusion: Introducing optometrists within the public sector improves access to services for rural communities. However, the minimum standard of optometric care

Leading sector development in Muaro Jambi District

Directory of Open Access Journals (Sweden)

Muhammad Safri

2017-09-01

Full Text Available Efforts to improve economic development and economic growth of Muaro Jambi Regency is a must. Efforts to increase economic development and economic growth can occur, if local governments are able to determine or identify priority sectors or become a base sector. Given the importance of determining and defining the right and correct strategy in the development of leading economic sectors/bases, it is necessary to conduct further study related to the development of leading sector policy in Muaro Jambi Regency. Analysis tools that are used are LQ (Location Quotient and SWOT analysis. The results of the analysis found that of there are three sectors that are the main sector or base in Muaro Jambi Regency, namely agriculture, livestock, plantation, fishery and forestry sector, mining and quarrying sector and manufacturing industry sector. Strategies that can be done in order to maintain and develop the sector and sub-sectors/recommended base there are several alternative strategies that combine internal environmental conditions and external environment Muaro Jambi Regency is S - O (power against opportunities, S - T (power against threats W - O (weakness to opportunity and W - T (weakness to threat. Keywords: Location Quotient, SWOT Analysis, Base Sector

Hybrid spectral CT reconstruction.

Directory of Open Access Journals (Sweden)

Darin P Clark

Full Text Available Current photon counting x-ray detector (PCD technology faces limitations associated with spectral fidelity and photon starvation. One strategy for addressing these limitations is to supplement PCD data with high-resolution, low-noise data acquired with an energy-integrating detector (EID. In this work, we propose an iterative, hybrid reconstruction technique which combines the spectral properties of PCD data with the resolution and signal-to-noise characteristics of EID data. Our hybrid reconstruction technique is based on an algebraic model of data fidelity which substitutes the EID data into the data fidelity term associated with the PCD reconstruction, resulting in a joint reconstruction problem. Within the split Bregman framework, these data fidelity constraints are minimized subject to additional constraints on spectral rank and on joint intensity-gradient sparsity measured between the reconstructions of the EID and PCD data. Following a derivation of the proposed technique, we apply it to the reconstruction of a digital phantom which contains realistic concentrations of iodine, barium, and calcium encountered in small-animal micro-CT. The results of this experiment suggest reliable separation and detection of iodine at concentrations ≥ 5 mg/ml and barium at concentrations ≥ 10 mg/ml in 2-mm features for EID and PCD data reconstructed with inherent spatial resolutions of 176 μm and 254 μm, respectively (point spread function, FWHM. Furthermore, hybrid reconstruction is demonstrated to enhance spatial resolution within material decomposition results and to improve low-contrast detectability by as much as 2.6 times relative to reconstruction with PCD data only. The parameters of the simulation experiment are based on an in vivo micro-CT experiment conducted in a mouse model of soft-tissue sarcoma. Material decomposition results produced from this in vivo data demonstrate the feasibility of distinguishing two K-edge contrast agents with

Hybrid spectral CT reconstruction

Science.gov (United States)

Clark, Darin P.

2017-01-01

Current photon counting x-ray detector (PCD) technology faces limitations associated with spectral fidelity and photon starvation. One strategy for addressing these limitations is to supplement PCD data with high-resolution, low-noise data acquired with an energy-integrating detector (EID). In this work, we propose an iterative, hybrid reconstruction technique which combines the spectral properties of PCD data with the resolution and signal-to-noise characteristics of EID data. Our hybrid reconstruction technique is based on an algebraic model of data fidelity which substitutes the EID data into the data fidelity term associated with the PCD reconstruction, resulting in a joint reconstruction problem. Within the split Bregman framework, these data fidelity constraints are minimized subject to additional constraints on spectral rank and on joint intensity-gradient sparsity measured between the reconstructions of the EID and PCD data. Following a derivation of the proposed technique, we apply it to the reconstruction of a digital phantom which contains realistic concentrations of iodine, barium, and calcium encountered in small-animal micro-CT. The results of this experiment suggest reliable separation and detection of iodine at concentrations ≥ 5 mg/ml and barium at concentrations ≥ 10 mg/ml in 2-mm features for EID and PCD data reconstructed with inherent spatial resolutions of 176 μm and 254 μm, respectively (point spread function, FWHM). Furthermore, hybrid reconstruction is demonstrated to enhance spatial resolution within material decomposition results and to improve low-contrast detectability by as much as 2.6 times relative to reconstruction with PCD data only. The parameters of the simulation experiment are based on an in vivo micro-CT experiment conducted in a mouse model of soft-tissue sarcoma. Material decomposition results produced from this in vivo data demonstrate the feasibility of distinguishing two K-edge contrast agents with a spectral

Aortic arch reconstruction: deep and moderate hypothermic circulatory arrest with selective antegrade cerebral perfusion.

Science.gov (United States)

Wu, YanWen; Xiao, LiQiong; Yang, Ting; Wang, Lei; Chen, Xin

2017-07-01

To compare the effects of moderate and deep hypothermic circulatory arrest (DHCA) with selective antegrade cerebral perfusion (SACP) during aortic arch surgery in adult patients and to offer the evidence for the detection of the temperature which provides best brain protection in the subjects who accept aortic arch reconstruction surgery. A total of 109 patients undergoing surgery of the aortic arch were divided into the moderate hypothermic circulatory arrest group (Group I) and the deep hypothermic circulatory arrest group (Group II). We recorded the data of the patients and their cardiopulmonary bypass (CPB) time, aortic clamping time, SACP time and postoperative anesthetized recovery time, tracheal intubation time, time in the intensive care unit (ICU) and postoperative neurologic dysfunction. Patient characteristics were similar in the two groups. There were four patients who died in Group II and 1 patient in Group I. There were no significant differences in aortic clamping time of each group (111.4±58.4 vs. 115.9±16.2) min; SACP time (27.4±5.9 vs. 23.5±6.1) min of the moderate hypothermic circulatory arrest group and the deep hypothermic circulatory arrest group; there were significant differences in cardiopulmonary bypass time (207.4±20.9 vs. 263.8±22.6) min, postoperative anesthetized recovery time (19.0±11.1 vs. 36.8±25.3) hours, extubation time (46.4±15.1 vs. 64.4±6.0) hours; length of stay in the intensive care unit (ICU) (4.7±1.7 vs. 8±2.3) days and postoperative neurologic dysfunction in the two groups. Compared to deep hypothermic circulatory arrest, moderate hypothermic circulatory arrest can provide better brain protection and achieve good clinical results.

Spectral CT metal artifact reduction with an optimization-based reconstruction algorithm

Science.gov (United States)

Gilat Schmidt, Taly; Barber, Rina F.; Sidky, Emil Y.

2017-03-01

Metal objects cause artifacts in computed tomography (CT) images. This work investigated the feasibility of a spectral CT method to reduce metal artifacts. Spectral CT acquisition combined with optimization-based reconstruction is proposed to reduce artifacts by modeling the physical effects that cause metal artifacts and by providing the flexibility to selectively remove corrupted spectral measurements in the spectral-sinogram space. The proposed Constrained `One-Step' Spectral CT Image Reconstruction (cOSSCIR) algorithm directly estimates the basis material maps while enforcing convex constraints. The incorporation of constraints on the reconstructed basis material maps is expected to mitigate undersampling effects that occur when corrupted data is excluded from reconstruction. The feasibility of the cOSSCIR algorithm to reduce metal artifacts was investigated through simulations of a pelvis phantom. The cOSSCIR algorithm was investigated with and without the use of a third basis material representing metal. The effects of excluding data corrupted by metal were also investigated. The results demonstrated that the proposed cOSSCIR algorithm reduced metal artifacts and improved CT number accuracy. For example, CT number error in a bright shading artifact region was reduced from 403 HU in the reference filtered backprojection reconstruction to 33 HU using the proposed algorithm in simulation. In the dark shading regions, the error was reduced from 1141 HU to 25 HU. Of the investigated approaches, decomposing the data into three basis material maps and excluding the corrupted data demonstrated the greatest reduction in metal artifacts.

Organizing cross-sectoral collaboration in river basin management : Case studies from the Rhine and the Zhujiang (Pearl River) basins

NARCIS (Netherlands)

Silveira, André; Junier, S.J.; Hüesker, Frank; Qunfang, Fan; Rondorf, Andreas

2016-01-01

ABSTRACT: This paper analyses the drivers and constraints for effective cross-sectoral collaboration in river basin management and the extent to which factors identified in related literature determine success or failure of collaboration in selected case studies. Cases selected were from

Selective Search, Sectoral Patterns, and the Impact on Product Innovation Performance

DEFF Research Database (Denmark)

Köhler, Christian; Sofka, Wolfgang; Grimpe, Christoph

2012-01-01

The shift toward more open and interconnected innovation activities has been a major topic in recent academic and practitioner discussions. Firms must connect their in-house R&D activities with external partners, such as leading customers or universities, to increase the effectiveness of their in......The shift toward more open and interconnected innovation activities has been a major topic in recent academic and practitioner discussions. Firms must connect their in-house R&D activities with external partners, such as leading customers or universities, to increase the effectiveness...... of their innovation activities. Hence, management needs to define where to search for valuable knowledge in its environment. In this paper we argue that knowledge search has to reflect the heterogeneity of various knowledge sources with regard to the knowledge they can provide and how these sources can be activated....... We hypothesize that search strategies driven by science, suppliers and the product market will contribute differently to innovation success with new-to-market versus imitated products. Moreover, we explore the effect of these types of knowledge search within different sectoral patterns of innovation...

Comparing public and private sector switchers

DEFF Research Database (Denmark)

Frederiksen, Anders; Hansen, Jesper Rosenberg; Bozeman, Barry

are related to sector switching and the pattern of sector switch, public to private versus private to public. We propose a life stage model arguing that people's needs change in different life stages of their lives. We further suggest that this can help explain why they switch sector. We use unique Danish...... labor market data that include information on all employees in Denmark (both private and public sector). The data are for the period 1980 to 2006, and this longitudinal database includes abundant information about job changes, including sector switching. Our findings indicate mixed support....... Finally, we find that people with more education are likely to switch from private to public sector....