WorldWideScience

Sample records for seitai yugo kinosei

  1. Fiscal 1998 regional consortium R and D project (Regional consortium field). Report on R and D of production technology of hybrid-type biocompatible hard tissue replacing materials (1st fiscal year); 1998 nendo chiiki konsoshiamu kenkyu kaihatsu jigyo. Chiiki konsoshiamu bun'ya (hybrid gata seitai yugo kinosei kososhiki daitai sozai seizo gijutsu no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This project aims at development of high-strength high- biocompatible {beta}-type Ti alloy with lower modulli of elasticity composed of non-toxic elements, phosphate calcium ceramics for improving the biocompatibility and coating technology, and establishment of production technology of hybrid-type biocompatible hard tissue replacing materials. In fiscal 1998, the project promoted the following: Design of high-biocompatible {beta}-type Ti alloy materials, development of thermomechanical treatment for improving dynamic characteristics of such alloy, survey on practical melting and casting technologies and dental precision casting process, evaluation of the biocompatibility of the alloy by cytotoxicity, selection of tools for precision machining and surface finishing, control of contents, orientation and precipitation of biocompatible crystals such as {beta}- Ca(PO{sub 3}){sub 2} fibers for further improvement of the biocompatibility. This paper also outlines the survey results on the market needs, market size and market share for the feasibility of these materials. (NEDO)

  2. Fiscal 1999 achievement report on regional consortium research and development project. Regional consortium activity in its 2nd year (Research and development of hybrid-type biocompatible hard tissue replacing materials); 1999 nendo hybrid gata seitai yugo kinosei kososhiki daitai sozai seizo gijutsu no kenkyu kaihatsu seika hokokusho. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Studies are conducted about highly biocompatible {beta}-type titanium alloys and calcium phosphate-based ceramics, high in strength and low in elasticity and constituted of non-toxic alloy elements, and about the technology of providing coatings for these materials. In the designing of such a highly biocompatible titanium alloy and the evaluating of its mechanical properties, studies are conducted about alloy formation into a practical size, fatigue characteristics and micro-structure, methods for improving its wear resistance, etc. In the development of a melting/casting technique for this purpose, studies are conducted about the melting/casting of the alloy into a practical size and about a high-recision casting technology. In the research on biological evaluation of biocompatibility and on the technology of precision casting for dentistry, studies are conducted about the reaction of the alloy with biological tissues and methods for precision casting for dentistry. Studies are also conducted about the development of technologies for precision work and precision finish for alloys. Further studies involve the development of calcium phosphate-based ceramics for the enhancement of {beta}-type titanium alloy's biocompatibility and the establishment of a technology of providing coatings for the alloy. (NEDO)

  3. FY 2000 report on the results of the regional consortium R and D project - Regional consortium field. Third year report. R and D of the manufacturing technology of hybrid type biocompatible hard tissue substituting materials; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium bun'ya. Hybrid gata seitai yugo kinosei kososhiki daitai sozai seizo gijutsu no kenkyu kaihatsu (dai 3 nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    As instrument materials substituting for hard tissue such as tooth root and artificial hip joint, the technology development is being proceeded with of the use of high-biocompatible {beta} Ti alloys coated by hydroxy apatite. Studies were made in the following 6 fields: 1) design of high-biocompatible {beta} Ti alloys, system control and dynamic evaluation; 2) development of high efficiency calcium phosphate ceramics (hydroxy apatite) and development of surface coating technology; 3) development of melting casting technology of high-biocompatible {beta} Ti alloys; 4) biological evaluation of biocompatibility of high-biocompatible {beta} Ti alloys and completion of dental precision casting technology; 5) basic research on affinity of low rigidity Ti alloys (trial manufacture); 6) development of technology of precision processing and precision finishing processing of alloys. In 5), in the test on affinity of the trial-manufactured alloys, stainless steel and existing Ti alloys, it was verified that the trial-manufactured alloys were excellent in affinity. (NEDO)

  4. FY 1998 achievement report on the R and D project on industrial science technology. Development of a functional biomolecule analysis/synthesis system; 1998 nendo kinosei seitai bunshi kaiseki gosei system no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of developing the technology required for the biotechnology industry, a study was made on proteins having ligand recognition function, and the FY 1998 results were reported. In the technology development of a system for various/diversified syntheses of functional molecules, a system was designed/trially manufactured which enables the simultaneous synthesis of various biological/functional substances (compound library) at high-efficiency. In the development of the structure analysis system of ligand recognized proteins, a high-efficient biopolymer analysis system was developed which is based on TOF (time-of-flight) mass spectrometer and analyzes proteins produced by recombined genes quickly and precisely. In the R and D of functional molecules using ligand recognized proteins, the cloning was successfully made of the human estrogen receptor gene hER {alpha}, which is composed of 1,785 bp, from MCF-7-BOS. Further, the bioassay system for estrogen-like substances using MCF-7 cells was established. (NEDO)

  5. Biosensor. Seitai sensa

    Energy Technology Data Exchange (ETDEWEB)

    Karube, I [The Univ. of Tokyo, Tokyo (Japan). Research Center for Advanced Science and Technology

    1993-06-15

    Present state of the art of biosensors is described by taking taste sensors and odor sensors as examples. Bio-devices that response only to specific chemical substances are made using membranes that recognize particular molecules. Biosensors are constructed in combination of bio-devices with electronics devices that transduce the response of bio-devices to electric signals. Enzymes are used often as bio-devices to recognize molecules. They recognize strictly chemical substances and promote chemical reactions. Devices to measure electrochemically substances consumed or produced in the reactions serve as sensors. For taste sensors, inosinic acid or glutamic acid that is a component of taste, is recognized and measured. Combination of various bio-devices other than enzymes with various transducers makes it possible to produce biosensors based on a variety of principles. Odor sensors recognize odors by measuring frequency change of the electrode of quartz oscillator. The change occurs with weight change due to odorous substances absorbed on the oscillator electrode coated with lipids which exist in olfactory cells. 1 ref., 1 fig.

  6. Evolution and ecology of bats; Komori no shinka to seitai

    Energy Technology Data Exchange (ETDEWEB)

    Kuramoto, T.

    1999-12-05

    This paper studies the ecology of bats. The age of the birth of bats is estimated to be from the end of the Mesozoic period to the early part of the Cenozoic period. It is inferred that the fingers were extended in the last stage of the evolution and that a membrane was developed between fingers and turned into wings. Further, improvement of the body was necessary for bats to fly. For example, bats need to have the powerful muscular strength, solid frame for the muscles to adhere to, framework and joints of the wings that surpass air resistance, and the circulatory system and the blood capable of supplying oxygen to the muscles. Different kinds of bats have different patterns of flying, which are each characterized by the shape and the muscle systems of the wings. The flying method has been analyzed in high speed movies. The shoulder joints are essential for the flight while their strength is different by the species. The difference in the flying method governs their ecology (zone of life, number of colony formations). The flocking types are classified into six kinds. The feeds are numerous. They do echo location except non-nocturnal large bats (Pteropodidae). The life span varies depending on the species of bats, ranging widely from 7 to 30 years. (NEDO)

  7. Survey of technological trends in functional membrane materials; Kinosei makuzai ni kansuru gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1979-03-01

    Materials for membranes with novel functions are surveyed. The survey is focused on 10 subjects, which are high-performance RO (reverse osmosis)/UF (ultrafiltration) membranes; development of an energy-efficient secondary treatment system for urban wastewater using pollution-free membranes; high-performance ion exchange membranes; artificial lung membranes; hydrogen separation membranes (hydrogen as energy); development of an energy-efficient combustion system using gas separation membranes (oxygen-enriched membranes); organic matter separation membranes; enzyme-aided chemical reaction membranes and their application; development of a distilling ship; and functional membranes making use of photosynthesis. Discussed in this connection are the outlines of the technologies, the need of their development, methods and contents of the development efforts, and the effects and impacts of their development. The survey further concerns the particulars of the trends in novel technologies about functional membrane materials development, covering gas separation and liquid separation technologies; chemical reaction membranes; and enzyme-aided chemical reaction membranes and their application systems. As for their application, the survey covers the field of application of desalinated or ultrapure water; field of application of food fermentation technologies; industrial wastewater, valuable materials recovery, and urban wastewater treatment; and application to medical systems. (NEDO)

  8. Countermeasures for increasing sequence continuous casting; Renchu kinosei taikabutsu zaishitsu, kozo kaizen ni yoru renrenchusu kojosaku

    Energy Technology Data Exchange (ETDEWEB)

    Tsuda, Masato; Shinagawa, Hiroaki; Kamada, Ryuji; Hiraga, Yutaka; Hara, Takayasu [Nippon Steel Corp., Tokyo (Japan)

    1999-06-01

    In the second continuous casting line of Kure Iron Works, Nisshin Steel Co., Ltd. improvement of the continuous casting counts per tundish was attempted for a target of max. 20. The results are as follows: (1) Non-SiO{sub 2} conversion of material for the long nozzle immersed part: About 20% improvement of durability compared with a conventional material to clear 0.059 mm/min of the targeted erosion speed when 20 CCC/TD is realized, (2) Durability improvement of SN plate: About 20% durability improvement was attained compared with a conventional material by the adoption of a non-SiO{sub 2} material, (3) Erosion resistance improvement of the immersed nozzle slug line part: Castable period was extended to 1 ch life improvement by increasing zirconia content, (4) Rise of stopper full open position: The rise of the full open position produced less variation of melt level than the conventional structure without increase of the SN opening, enabling plugging prevention between the stopper head and the upper nozzle which was an objective of this improvement, (5) Structure improvement of the upper nozzle: This improvement successfully prevented leaks from damage of the casting stop nozzle metal case and enabled casting under low gas flow even in TD nozzle plugging. These improvements gave a possibility to achieve max. 20 CCC/TD. (NEDO)

  9. Assessment report on the development of functionally inclined material; Keisha kinosei zairyo no kaihatsu hyoka hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Concerning a project whose aim is to develop heat resistant engine members through the application of the concept of functionally inclined materials, deliberation and assessment are made of the meaning of its implementation, validity of the research program, research achievement, etc. The project deals with a specimen, diameter 150mm or more and thickness 5mm or more, built of a zirconia/stainless steel-based functionally inclined material, and its goal is to develop technologies for optimizing the baking process for the said specimen, baking system and related devices, assessment technique, tribological assessment technique, etc., and it is inferred that these targets are reasonable. As the result of this research, an energy-efficient (power consumption reduced to 1/3 to 1/5) practical rapid sintering system is constructed. Basic data are collected relative to the tribology of the functionally inclined material, and it is proved that it is feasible to use the material for engine members. The process technology, assessment technology, and devices developed under this project are the first in the world, and are highly evaluated. (NEDO)

  10. Maruzen Petrochemical Co., Ltd.: It sells function carbon material; Kinosei tanso zai wo kakuhan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-28

    Maruzen Petrochemical Co., Ltd. strengthens the sales of the function carbon material. Maruzen Petrochemical Co., Ltd. started development of demand of the new function charcoals purple material. New carbon material proceeds with the sample work to turn the lithium ion the second battery that an electric self-help car and so on is being expected demand expansion with the material for molding which made naphsa resolution child quality oil raw material, and capacitor. In the same company, the policy that laying will be fitted to this rank diffusion of the electric car in the future and a business story comic will be advanced as a high-performance capacitor material. (translated by NEDO)

  11. Naturally occurring surfactants and their functional design. Seitai yurai safakutanto to kinoka sekkei

    Energy Technology Data Exchange (ETDEWEB)

    Ishigami, Y [National Inst. of Materials and Chemical Research, Tsukuba (Japan)

    1994-04-20

    An active use of the natural materials replaced the petroleum chemical products and an attempt for a development of the organism imitation materials are not limited only on the surfactants, but become a great trend also widely over the dyestuff, plastics material, food, cosmetics, agricultural chemicals and so forth. In addition, an institution of the recognition system for an 'eco-mark' is done, and a development of the environment conformity materials (eco-material) is advanced. In Japan since around 1950, a practical application and a research and development of new surfactants have been rapidly progressed making the derivatives originated in a petroleum chemistry as an axis. In this paper, including a viewpoint of the ecotechnology, a chemical structure and function of the surfactant being derived from the organisms, a molecule design and attempt for functional material making of the biomimetic surfactants are described. The author considers the biomimetic surfactants as one of the approaches to develop a new functional surfactant as the new raw materials, and is performing a development of the admixtures for improving a defect the soap has and so forth. 80 refs., 3 figs., 5 tabs.

  12. Surface modification of biocompatible materials. Seitai tekigo zairyo no hyomen kaishitsu

    Energy Technology Data Exchange (ETDEWEB)

    Tateishi, T [Mechanical Engineering Lab., Tsukuba, Ibaraki (Japan)

    1993-07-05

    The necessary conditions for biocompatible materials such as human bone, joints and teeth are mainly classified into biological condition and mechanical conditions. The former condition is consisted of chemical stability without causing poisoning or allergy, compatibility of good biological tissue, no carcinogenesis and not antigenicity, no decomposition and degradation inside human body, not causing adsorbate or precipitate. As for the latter, appropriate static strength, elastic modulus and hardness together with the characteristics like fatigue resistance, wear resistance and lubricating properties are given. As for other conditions for biomaterials, characteristics as a functional material, workability, adhesion and so forth are important. When surface nitrification of sintered Ti, forging Ti, sintered Ti-6Al-4V and forging Ti-6Al-4V is carried out, the solubility is decreased significantly by surface nitrification. The powder generated by the wear of nitriding Ti-6Al-4V with ultra high molecular weight polyethylene (UHMWPE) is less cell poisoning than the powder caused by the wear of the other alumina, stabilized zirconia, hydroxy apatite with UHMWPE. 16 refs., 2 figs., 1 tab.

  13. Artificial control of biocatalytic reaction; Seitai shokubai hanno no jin`iteki seigyo

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, K. [Kyoto University, Kyoto (Japan). Institute for Chemical Research

    1997-08-25

    Selective composition of optically active compounds by use of biocatalysts is discussed. No search is made for any particular microbes or enzymes, but predetermined ones are used. For an increase in the selective yield of L-type carnitine by reducing 4-chloroacetoacetic acid ester using baker`s yeast, the ester length should be enlarged to that of octyl ester. Just as in this case, steric control by ground substance modification is often effective. Lipase helps on esterification which is contrary to hydrolysis in an organic solvent and, even in the optical division in this process, steric control by ground substance modification (for example by changing the structure of the acyl section) is effective. Immobilization of biocatalysts for use in reaction occasionally exerts some effect on stereoselectivity. Two types of enzymes may be participating in a reaction and inhibiting selectivity, and then a two-layer system of water and organic solvent may be effective in performing steric control over the situation. Another measure is to inhibit the activity of either of the two enzymes by use of a selective inhibitor utilizing enzyme reaction. The kind of solvent is also an influential factor. 11 refs., 7 figs.

  14. Medical mechatronics which imitates living organisms. Seitai ni manabu iyo mechatronics

    Energy Technology Data Exchange (ETDEWEB)

    Ikuta, K. (Kyushu Inst. of Technology, Fukuoka (Japan))

    1991-11-01

    Medical equipments which aim at replacement of biological functions require some different mechatronic elements from industrial ones and such medical equipments are being developed with the object of imitating the functions of living organisms. Research and development of actuators and transmission devices with new principles modelling the functions of living organisms are presented. Servoactuators of small size and large output for their weights are constructedby the use of shape memory alloy. Prototypes of active endoscope and active catheter have been manufactured. A prototype of a cybernetic actuator have been manufactured by imitating flexible motion characteristics of biological muscle systems by the use of piezoelectric devices. A rotor-type cybernetic actuator consists of a pair of layered piezoelectric devices and a rotor with a small gap inbetween. A linear tvpe cybernetic actuator consists of piezoelectric devices for restricting the actuator and impact driving. A transmission mechanism of a new principle whose features are safety, no noise and nodusts is designed by the use of non-contact magnetic gears. 10 refs., 6 figs.

  15. Study about the effect of microgravity on biofunctions; Seitai kino eno bisho juryoku no eikyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A study is made for the elucidation of the effect of microgravity on biofunctions. The protoplast of shiitake is exposed to microgravity and then cultured, and a significant difference occurs. The rate of colony formation by cell fusion in the test sector is found to be two times higher than that in the control sector. When swimming ciliates which are unicellular are suddenly exposed to microgravity, their swimming speeds changed differently according to the direction of swimming. When a mouse subjected to acupuncture for three days is exposed to microgravity, its water metabolism and excretory function are enhanced. A mouse treated with Chinese medicine reacts in the similar way. The change due to microgravity in the amount of acetylcholine in the hypothalamus is found characteristically time dependent. Mice infected with lethal herpes viruses just after exposure to microgravity die at a rate in proportion to the number of exposures and to the amount of viruses given. The migration speed of chemical stripes in case of a gel-base BZ (Belousov-Zhabotinsky) reaction under microgravity is equal to that on the ground. The trigger wave migration speed in case of a water solution-base BZ reaction under microgravity is reduced to approximately 80% of the speed on the ground. 12 refs., 31 figs., 3 tabs.

  16. Environmental control by biotechnology and ecotechnology, construction of ecopolis. Seibutsu kogaku-seitai kogaku to kankyo joka, Ecopolis no soshutsu

    Energy Technology Data Exchange (ETDEWEB)

    Mori, T [Shimane Univ., Shimane (Japan). Faculty of Agriculture

    1992-09-01

    The relationship between environmental control and biotechnology is discussed, and purification of moats and lakes is taken up as a concrete example of introducing biological waste water treatment technology to ecotechnology. In addition, an overall waste disposal system connecting cities and agricultural districts is investigated. After the purification of water and waste problem solution, etc. are discussed, the importance of creating ecopolis and ecotown is described. The 3 concepts of microbial ecotechnology (high densification of organism, field control, interaction between organisms) are used to explain biological treatment technology. Attempts for direct purification and ecotechnology are described quoting a few examples. If waste produced in cities and ligneous materials or charcoal obtained from forests are mixed for treatment, effective waste treatment or new resources production may be possible. It seems to be possible to create ideal ecopolis and ecotown by applying the doctrine of irrigation, drainage and reclamation engineering and the technology established by now. 35 refs., 1 fig., 2 tabs.

  17. Study on the creation of biopolymer materials under micro-gravity; Bisho juryokuka deno seitai kobunshi zairyo no sosei kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In order to create new functional organic thin film materials, basic data were examined under micro-gravity. Polymerization of pyrrole was affected by micro-gravity after a few minutes from the beginning of reaction. Although relatively uniform particles were obtained, the particle size was finely dependent on conditions. Electrolytic polymerization of conductive organic thin films was yet unstable in reproducibility. On orientation control and thin film formation of protein under gravity-free environment, electrodeposited films were obtained using bacteriorhodopsin film suspension by applying voltage of 6.4V for 9s after 1s from falling. The reproducibility of the number and area of molecular layers was poor. On the study on the formation process of organic thin films, creation of homogeneous films is probably possible by filtration from suspension under reduced pressure under micro-gravity for a short time. Trial linear polymer tied in a row was obtained by capillary injection of dense polymer solution. The viscous fingering phenomenon of viscoelastic bodies under micro-gravity was compared with that on the ground. 11 refs., 36 figs., 1 tab.

  18. Study on the advanced orientation control technology of biopolymers; Seitai kobunshi zairyo no kodo haiko hairetsu seigyo gijutsu no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Creation of new functional organic materials for the medical application has been investigated under the microgravity. Facilities of the Japan Microgravity Center were used for this study. For the high-speed synthesis of uniform polymer particles under the microgravity condition for ten seconds, appropriately good results were obtained in the oxidation polymerization of pyrroles. For the synthesis of organic conductive thin films by the electrolytic polymerization, the resistance of electrolyte became larger in the microgravity field. It was required to set conditions so as to enhance the effects of microgravity environment. For the orientation control and thin film formation of proteins, the bacteriorhodopsin was examined. It was found that the microgravity improved the quality of electrocoatings. When the surface tension and viscosity of coating liquid were appropriately controlled under the microgravity, thin films were able to be prepared by utilizing a change from 1g to {mu}g. When the high viscosity fluid is placed in the artificial two-dimensional space composing of two parallel plates, and the low viscosity fluid, such as air, is injected into the above, the interface grows in the finger shaped pattern, namely, viscous fingering. The influence of gravity on this phenomenon was also investigated. 11 refs., 45 figs., 5 tabs.

  19. Research and development on fusion zones in fiscal 1999. Third volume. Biomolecular mechanism and design; 1999 nendo yugo ryoiki kenkyu kaihatsu seika hokokusho. 3. Biomolecular mechanism and design

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    It was intended to elucidate the structures of living organisms having excellent functions and the principles of these functions, and to create cells, structural bodies and molecular mechanisms that substitute these functions outside the bodies of the living organisms. Therefore, research and development has been performed on the fundamental technologies, whose achievements are compiled. In the research of creating cultured bones and cartilages, marrow cells and cartilage cells were cultured while providing physiological active materials and mechanical stimulation. Porous ceramics and porous biodegradating polymers coated with collagen were used as the substrate materials to have created artificial cartilages. In the research of structural change in a molecule motor, a low temperature electron microscope was used to make the structure visualized successfully for the first time. In the research of creating an artificial liver, the world's first cells like stem cells separated and refined from liver cells were cultured three dimensionally in a bio-reactor using special cultivation solution to have established the basic technology. In the research of libozyme, sensor function and high catalytic function were realized successfully in the cells by dimerizing libozymes. (NEDO)

  20. Research and development on fusion zones in fiscal 1999. Third volume. Biomolecular mechanism and design; 1999 nendo yugo ryoiki kenkyu kaihatsu seika hokokusho. 3. Biomolecular mechanism and design

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    It was intended to elucidate the structures of living organisms having excellent functions and the principles of these functions, and to create cells, structural bodies and molecular mechanisms that substitute these functions outside the bodies of the living organisms. Therefore, research and development has been performed on the fundamental technologies, whose achievements are compiled. In the research of creating cultured bones and cartilages, marrow cells and cartilage cells were cultured while providing physiological active materials and mechanical stimulation. Porous ceramics and porous biodegradating polymers coated with collagen were used as the substrate materials to have created artificial cartilages. In the research of structural change in a molecule motor, a low temperature electron microscope was used to make the structure visualized successfully for the first time. In the research of creating an artificial liver, the world's first cells like stem cells separated and refined from liver cells were cultured three dimensionally in a bio-reactor using special cultivation solution to have established the basic technology. In the research of libozyme, sensor function and high catalytic function were realized successfully in the cells by dimerizing libozymes. (NEDO)

  1. To the fusion of age - economy and ecology of the ring industry revolution; Kankyo kakumei no jidai {approx}ekonomi to ekoroji no yugo he

    Energy Technology Data Exchange (ETDEWEB)

    Akaike, Manabu

    1999-05-31

    What has suddenly been noticed as a keyword of the durable industry creation in which the ecology is made to be compatible with the economy is a philosophy of {sup t}he bio region (the life regionalism){sup .} As the concepts of region management desired at present, the philosophy of bio region which is the thought of the next generation development which I notice at present most roots in the place where selves live, and it aims at uniting with the region. In the reason, it is required that natural resources such as climate, land form, basin, soil, microorganism, flora and fauna, resources that the region has are utilized maximally. (NEDO)

  2. The City of Women Festival and the Context of the Nineties: From the Journey in a Red Yugo to the Setting Up the Festival

    Directory of Open Access Journals (Sweden)

    Vlasta Jalušič

    2015-09-01

    Full Text Available The text addresses the question of political and social circumstances in which the festival City of Women was established in 1995. The main points of discussion are what were the main features of the post-socialist experience in the 90s; what was the attitude towards feminism as a political position, theory and a way of life; what were the relationships between the state and civil society; and how we could assess the emergence of the festival. The contribution builds on the personal recollection of the author and includes some personal accounts, and on already collected documents, material and interviews from the book How We Attended a Feminist Secondary School and some other sources. The main conclusion is that the biggest achievement of the City of Women Festival was that it uniquely brought about the important connection between feminism, art, culture, science and theory, and everyday life experience in the post-socialist Slovenia, and also to other regions. It has also contributed to the birth of a new generation of younger feminists.

  3. Achievement report on research and development on fusion zones in fiscal 1999. Second volume. Chemo-intelligence; 1999 nendo yugo ryoiki kenkyu kaihatsu seika hokokusho. 2. Kemo intelligence

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    With an objective to artificially realize diverse functions and structures using as a trigger the molecule recognition in living things and organisms, researches and surveys were performed on chemo-intelligence. This paper reports the achievements in fiscal 1999. In a theoretical approach to elucidate inter-molecular interactions, research was performed on hydrogen bondage, CH-{pi} interactions and stacking by using the computerized chemical method. In the design and synthesis of host molecules, development was carried out on a synthesizing method based on large ring compounds and non-ring compounds utilizing the interactions having weak hydrogen bondage, and molecular design utilizing the conformity in sizes and shapes of the molecules. In structuring the host molecules having a function to recognize neutral molecules, research was executed on capturing and activation of neutral organic molecules as the artificial host molecules. In addition, investigations were given on the latest information about separation of ionic substance recognizing compounds and their application to sensing, structure of ultra-molecular construction and the function thereof, and approaches aimed at their use as materials and applications. (NEDO)

  4. Report on results 1998. Research and development on fusion area. Part 2 (chemo-intelligence); 1998 nendo seika hokokusho. Yugo ryoiki kenkyu kaihatsu daini bunsatsu (chemo-intelligence)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Chemo-intelligence is defined as artificially realizing and then materializing various functions and structures that are caused by the transmission of precise chemical information based on molecular recognition in organisms. Creation of substances/materials having functions no less superior to those of organisms enables environmentally benign, energy-saving, and resource-conserving functional materials to be realized, as materials for separation of toxic and useful substances, their sensing, and the conversion (catalysts). For this purpose, started were a computational chemical approach for molecular design, functional prediction, functional analysis, etc., to realize precise molecular recognition; an approach from synthesis of molecular recognition compounds; an approach from functional manifestation/elucidation, structural analysis, etc.; and also investigation and research on application to the materialization and systematization. The results were summarized by classifying them into molecular interactions, host molecules, ionic substance recognition compounds, super molecular structures, materialization, application, etc.. (NEDO)

  5. Report on the achievements in fiscal 1999 of research and development of fusion zones. Calculation science; 1999 nendo yugo ryoiki kenkyu kaihatsu seika hokokusho. Keisan kagaku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In order to elucidate the mechanism for specific phenomena from the atom scale to the meso-scale, developmental research has been performed on a fusion type calculation method. This paper reports the achievements in fiscal 1999. In planning the policy of structuring the program package TACPAC and its application method, the program for materials STATE using the classical molecule dynamics method and the biological program, Peach, were selected as the programs to act as the nuclei. In continuing performance improvements respectively in the computer programs to be fused, and improving the performance of the software fused with them, the programs were transferred into a super-computer. As a result, it was found that the classical and the first principle quantum molecular dynamics method program STATE can be executed at high efficiency on the super-computer. In executing the challenging computer simulation and developing a calculation method for large scale systems, researches were performed on alcohol synthesizing reaction on copper surface and the status of association of gene DNA molecules with enzymes, and development was carried out on a matrix generation method to calculate non-empirical molecule trajectories of the large scale systems. (NEDO)

  6. FY 1997 research and development of fusion domains. Part 2. Studies on bionic design; 1997 nendo seika hokokusho (yugo ryoiki kenkyu kaihatsu). 1. Bionic design no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Studies were conducted on actuator function in bio materials, cells, structures, and living organisms, and on structuring a biological molecule machine. In the study on soft biological structures, biological compatibility of artificial glass bodies using ultra-polymeric PVA was found very high, raising expectation on feasibility of their practical use. Three-dimensional structure of glass bodies was made clear for the first time in the world. As a result of separating and purifying cells from a liver for the first time in the world, it was indicated that excellent proliferation performance and differentiation into cells are shown. With regard to hydroxyapatite in hard biological structure such as bones and teeth, single crystals were synthesized, and growth rate on the surface C was measured successfully. For molecular motors, studies are being performed on functions of twin-head structure in biological protein enzyme. In molecule structuring, studies were conducted on preparation of a hydrogenase LB membrane as an electric-hydrogen energy conversion element, and structuring of protein molecular structure using gene recombination. 69 refs., 37 figs., 8 tabs.

  7. Correlation between the structural relaxation and the functionality of optically functional glasses; Kokinosei glass ni okeru kozo kanwa to kinosei no sokan

    Energy Technology Data Exchange (ETDEWEB)

    Nishida, T [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1994-12-15

    A discussion was given to elucidate the correlation between the crystallization of infrared ray permeating glass and the infrared ray permeability. The elucidation used infrared ray permeation spectrum, infrared ray absorption spectrum, and the Mosbauer effect. Reduction in permeability due to heat treatment of aluminate glass was discussed from the crystallization mechanism. Ultrafine crystals of mayenite phase having a composition ratio of CaO/Al2O3 = 1.7 diffuse and grow from the glass surface into interior as a result of heat treatment. The crystal growth is triggered by severance of Al-O tetrahedron. Gallate glass has CaGa2O4 and small amount of CaFe2O4 phase deposited when it is heat-treated in the vicinity of Tg. Although the infrared ray permeability decreases in association with the crystallization, the decrease is limited to crystallization on the glass surface, hence the permeability will not fall to zero. Laser irradiation on the gallate glass causes crystallization, resulting in reduced infrared ray permeability. Semi-stable Ca3Ga4O7 phase remains, however, because the heat energy amount is not large. Tellurite glass has {alpha}-TeO2 and a small amount of telluric acid iron deposit when heat-treated. 29 refs., 10 figs.

  8. Evaluation report on the development of high-function ultrathin film for new oil refining process; Shinsekiyu seisei process ni kakawaru kinosei chousumaku no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This evaluation committee report covers the project entitled 'Development of high-function ultrathin film for new oil refining process' which was under way for three years from fiscal 1998 through 2000. The evaluation committee is so designed that researchers outside the organization responsible for the project performs an objective and impartial evaluation of the national project concerned as to its objective, goal, plan, operation, implementation system, rate of progress toward achievement, and the significance of the results achieved. The committee aims to disclose to the taxpayer the actualities of State-run research and development projects by making them transparent to people's eyes, which is one of the duties of the committee, and to elevate the value of the research results by impartially and duly evaluating them. In this report, the outlines of the project and of the obtained research results are introduced in Chapter 1, and then the details of the evaluation of the project are described in Chapter 2. It is stated that the organic/inorganic laminate membrane fabrication technology utilizing low temperature TiO{sub 2} film formation is evaluated high. It is also stated that the effect of the analysis and evaluation technology is expected to spread and find its use in various industrial fields. (NEDO)

  9. Preliminary observations of cadmium and copper effects on juveniles of the polychaete Capitella sp. Y (Annelida: Polychaeta from Estero del Yugo, Mazatlán, México Observaciones preliminares de los efectos de cadmio y cobre sobre juveniles del poliqueto Capitella sp. Y (Annelida: Polychaeta del Estero del Yugo, Mazatlán, México

    Directory of Open Access Journals (Sweden)

    NURIA MÉNDEZ

    2005-12-01

    Full Text Available The effects of cadmium (Cd and copper (Cu on cultured juveniles of Capitella sp. Y were investigated. Seven-day old juveniles were exposed to 13 (control, 60, 160, 240 and 340 mg Cd L-1 and 17 (control, 50, 120 and 150 mg Cu L-1 for 30 days. Mortality significantly increased with increasing Cu concentrations, but in Cd exposures, it was only evident at 340 mg L-1. Body size and faecal pellet production were reduced earlier in juveniles exposed to Cu than those exposed to Cd, especially in the higher Cu concentrations. These facts indicate that juveniles are more sensitive to Cu in terms of mortality, feeding and growth. Haemoglobin production was inhibited due to the scarcity of food in the experimental sediment rather than to metal exposure. Tube building was not affected by the presence of metals or by the scarcity of food. This study suggests that Cu concentrations from 50 to 150 mg L-1 and 340 mg L-1 of Cd could affect the population dynamics of this species in natural ecosystemsSe investigaron los efectos de cadmio (Cd y cobre (Cu sobre juveniles cultivados de Capitella sp. Y. Organismos juveniles de siete días de edad fueron expuestos a 13 (control, 60, 160, 240 y 340 mg Cd L-1 y a 17 (control, 50, 120 y 150 mg Cu L-1 durante 30 días. La mortalidad se incrementó significativamente al aumentar las concentraciones de Cu y, en las exposiciones a Cd, solamente fue evidente a 340 mg L-1. El tamaño corporal y la producción de heces fecales disminuyeron antes en los especímenes expuestos a Cu que en los expuestos a Cd, especialmente en las concentraciones más altas de Cu. Estos resultados indican que los juveniles son más sensibles al Cu en términos de mortalidad, alimentación y crecimiento. La producción de hemoglobina fue inhibida debido a la escasez de alimento en el sedimento experimental, más que a exposición a los metales. La formación de tubos no fue afectada por la presencia de metales ni por la escasez de alimento. Este estudio sugiere que concentraciones entre 50 y 150 mg L-1 de Cu y de 340 mg L-1 de Cd, podrían afectar la dinámica poblacional de esta especie en ecosistemas naturales

  10. FY1995 new technology of artificial organ materials which can induce host biocompatibility; 1995 nendo jinko zokiyo seitai kino fukatsukagata sozai no kaihatsu gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The aim of this project is to produce a highly biocompatible materials for next generation's artificial organs using the following methods: 1, Micromodification of polymer materials. 2, Biocompatible treatment for biological materials. 3, Application of bioabsorbable materials. 4, Bioactive substance immobilization. and 5, Use of autologous tissue as artificial organ materials. As a synthetic polymer material, microporous polyurethane was used for a small diameter vascular prosthesis. The graft with this technology was successfully implanted in rat abdomical aortic position. The graft of 1.5 mm in internal diameter and 10cm in length showed excellent patency with nice endothelialisation. As a biological material, microfibers of collagen was used for a sealing substance of vascular prothesis. The microfibers absorbed a large amount of water, which could prevent blood leakage from the graft wall. The graft showed non-thrombogenic property and excellent host cell affinity, resulted in rapid neointima formation. As to autologous tissue, bone marrow was used, since marrow cells can differentiate into any mesenchimal cells with synthesis of growth factors. Marrow cell transplanted vascular prothesis showed rapid capillary ingrowth. These results indicated that the newly designed materials had suitable properties for materials of next generation's artificial organs. (NEDO)

  11. Study on the effect of micro-gravity on bio-functions; Seitai kino eno bisho juryoku no eikyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The effect of micro-gravity on bio-functions and vital reaction was studied using the facility of Underground Gravity-free Experiment Center Co. On the effect on osteoblast shape and gene expression, although fluorochrome reacting with Ca was well taken into cells, no significant difference in Ca content in cells was observed before/after falling. Expression of genes related to cell propagation was controlled under micro-gravity. Protoplast fusion of Lentinus was unaffected by micro-gravity. The mRNA fragments of gravity sensitive mutant of rice plant were affected by micro-gravity. Paramecium was set swimming in solutions with different specific gravities. The reaction behavior of Paramecium was affected by the difference in specific gravity between cell bodies and solutions. The water content metabolism functions of a mouse with needle stimulus, in particular excretory, were slightly promoted by micro- gravity. The cortisol level in blood of a falling mouse group rose showing strong stress. As the preliminary study on the geotaxis of insects, motion of bagworm was observed. 12 refs., 38 figs., 4 tabs.

  12. Continuous measurement of electrical characteristics in plants. 3. Shokubutsu seitai no denki tokusei sokuteiho. 3. ; Suikoeki pH chosei heno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Sekiyama, T; Haniyu, H; Saiki, H

    1989-09-01

    Controlling pH of nutrient solution and keeping the other conditions unchanged, measurements of variation in electric potential difference between leaf and hypocotyl of a bush bean plant was performed for about seven days. Silver electrodes 0.3mm in diameter were glued on the surface of the plant using conductive paste prepared by dissolving gelatine in Ringel {prime} s solution. The results obtained are summarized as follws: first, when pH of the solution is suddenly increased or decreased, the potential of leave becomes high or low with respect to that of hypocotyl respectively; second, the variation in potential difference between them is affected by the rate at which pH of the solution is adjusted, although the total variation of pH is controlled to be the same, and in particular by mild adjustment (0.02 - 0.05pH/min) it is reduced to 1/2 - 1/4 of that produced by sudden change; third, abrupt change in pH of the solution cause to the plant the temporary suppression of its water absorption having a duration of 7 - 15 minutes. A short account is given of a non-contact type measurement of bioelectric potential performanced by making use of a Faraday {prime} s cage. 11 refs., 12 figs.

  13. FY1995 new technology of artificial organ materials which can induce host biocompatibility; 1995 nendo jinko zokiyo seitai kino fukatsukagata sozai no kaihatsu gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The aim of this project is to produce a highly biocompatible materials for next generation's artificial organs using the following methods: 1, Micromodification of polymer materials. 2, Biocompatible treatment for biological materials. 3, Application of bioabsorbable materials. 4, Bioactive substance immobilization. and 5, Use of autologous tissue as artificial organ materials. As a synthetic polymer material, microporous polyurethane was used for a small diameter vascular prosthesis. The graft with this technology was successfully implanted in rat abdomical aortic position. The graft of 1.5 mm in internal diameter and 10cm in length showed excellent patency with nice endothelialisation. As a biological material, microfibers of collagen was used for a sealing substance of vascular prothesis. The microfibers absorbed a large amount of water, which could prevent blood leakage from the graft wall. The graft showed non-thrombogenic property and excellent host cell affinity, resulted in rapid neointima formation. As to autologous tissue, bone marrow was used, since marrow cells can differentiate into any mesenchimal cells with synthesis of growth factors. Marrow cell transplanted vascular prothesis showed rapid capillary ingrowth. These results indicated that the newly designed materials had suitable properties for materials of next generation's artificial organs. (NEDO)

  14. Study of the influence of microgravity on the biological cells and molecular level; Seitai saibo bunshi level ni okeru bisho juryoku no eikyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The shape of osteoblast, gene appearance, gene of rice blast, cellular fusion of plants, gravity acceptance mechanism of unicellular organisms, and physiological and immunity functions of mice were investigated under the microgravity condition. The influence of gravity on the vital reaction and the influence of microgravity on the crystallization of vital substances were also investigated. For the observation of osteoblast, the fluorescence dye reacted with Ca was well taken in the cells. The microgravity affected the stability of rice blast, but hardly affected the protoplast culture of mushroom. The reaction of ciliate against the gravity related to the specific gravity difference between cells and outer liquid. The level of adrenaline in blood of mice increased during the drop. The moving speed of trigger waves of chemical parallel slit formed at the BZ reaction under the microgravity became 60% to 80% of that on the ground. In the case of crystallization at the deposition agent concentration of 1% to 4%, the turbidity showing the degree of crystallization changed complicatedly. Nine processes of crystal growth were recognized. 21 refs., 55 figs., 1 tab.

  15. FY1995 report on the analyses of functional living systems using magnetic stimulation and magnetic fields; 1995 nendo jiki shigeki oyobi kyojiba ni yoru seitai kino kaimei

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The purpose of the project is to widen the understanding of the biological effects o magnetic fields and to search potential applications of biomagnetics to medical diagnosis and treatments. We developed a method of localized magnetic stimulation of the brain. By concentrating induced eddy currents on a target with a pair of opposing pulsed magnetic fields produced by a figure-eight coil, they were able to stimulate the human cortex within a 5 mm resolution. We studied the properties of diamagnetic water in static magnetic fields. The phenomenon that the surface of the water was pushed back by magnetic fields of higher gradients was observed. The behavior of oxygen dissolved in an aqueous solution under magnetic fields of up to 8T with a gradient of 50T/m was studied. For oxygen concentrations greater than 11 mg/l, a clear redistribution of dissolved oxygen was observed. Effects of strong magnetic fields on a process of dissolution of fibrin clots was studied. Fibrin polymers in water magneto-phoresically drifted in the direction of increasing magnetic fields, and dissolution of fibrin polymers by plasmin was accelerated. (NEDO)

  16. Report on achievements in fiscal 1998. Development of a technology to measure biological molecular interactions; 1998 nendo seitai bunshi sogo sayo no keisoku gijutsu no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    It has been indicated possible in principle in recent years to measure biological molecular interactions with the molecules in the living state by combining the technologies called the co-focussing optical system and the fluorescence correlation spectroscopy (FCS). The FCS method is a method capable of analyzing concentrations, sizes, and inter-molecule interactions through detection of fluorescence fluctuation in single molecules in submicron zones. In spite of the FCS method being a very effective method to measure interactions in biological molecules, the technology has not reached a level that allows easy utilization under the present condition. The present research and development is intended to solve the technological problems in the FCS method in the co-focussing optical system, and perform as many research and development works as possible in a short time to establish a technological foundation that can be provided to bio-industrial and medical sites. Particularly, in order to make the utilization thereof possible in measuring biological molecular interactions in cells, a measuring technology using the bi-photon excited fluorescence correlation spectroscopy was established with an objective to reduce damages to cells and their internal micro organs, and minimize effects of interference signals from the own fluorescence. (NEDO)

  17. FY1995 bio-information monitoring microsystems for human health care; 1995 nendo kenko kanri wo mokutei to shita seitai joho keisokuyo micro system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-31

    Long term and continuous monitoring of health parameters have been expected for patient monitoring, human health care and sick prevention. Bio-information monitoring microsystems which can send personal health information to the doctor in the hospital at any time through mutual data communication networks. A prototype of the very low-power consumption wireless systems for monitoring ECG (Electrocardiogram) was fabricated and tested. It consists of an ECG detector/transmitter located at the chest and a relay transmitter placed at the wrist. Data communication between them is obtained with very low-power signal transmission by AC micro current flown through the tissue of the body. A prototype of a multi sensor chip for biosensing micro capsule was also fabricated and tested. It consists of a piezo resistive diaphragm pressure sensor, a pH ISFET (Ion Sensitive Field Effect Transistor) and a p-n diode temperature sensor. To realize reliable medical telemetry in severe electromagnetic environment, spread spectrum communication to ECG data method was applied. This method is very useful for the data communication of bio-information monitoring microsystems. (NEDO)

  18. FY1995 new technology of artificial organ materials which can induce host biocompatibility; 1995 nendo jinko zokiyo seitai kino fukatsukagata sozai no kaihatsu gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    The aim of this project is to produce a highly biocompatible materials for next generation's artificial organs using the following methods: 1, Micromodification of polymer materials. 2, Biocompatible treatment for biological materials. 3, Application of bioabsorbable materials. 4, Bioactive substance immobilization. and 5, Use of autologous tissue as artificial organ materials. As a synthetic polymer material, microporous polyurethane was used for a small diameter vascular prosthesis. The graft with this technology was successfully implanted in rat abdomical aortic position. The graft of 1.5 mm in internal diameter and 10 cm in length showed excellent patency with nice endothelialisation. As a biological material, microfibers of collagen was used for a sealing substance of vascular prothesis. The microfibers absorbed a large amount of water, which could prevent blood leakage from the graft wall. The graft showed non-thrombogenic property and excellent host cell affinity, resulted in rapid neointima formation. As to autologous tissue, bone marrow was used, since marrow cells can differentiate into any mesenchimal cells with synthesis of growth factors. Marrow cell transplanted vascular prothesis showed rapid capillary ingrowth. These results indicated that the newly designed materials had suitable properties for materials of next generation's artificial organs. (NEDO)

  19. FY1995 new technology of artificial organ materials which can induce host biocompatibility; 1995 nendo jinko zokiyo seitai kino fukatsukagata sozai no kaihatsu gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    The aim of this project is to produce a highly biocompatible materials for next generation's artificial organs using the following methods: 1, Micromodification of polymer materials. 2, Biocompatible treatment for biological materials. 3, Application of bioabsorbable materials. 4, Bioactive substance immobilization. and 5, Use of autologous tissue as artificial organ materials. As a synthetic polymer material, microporous polyurethane was used for a small diameter vascular prosthesis. The graft with this technology was successfully implanted in rat abdomical aortic position. The graft of 1.5 mm in internal diameter and 10 cm in length showed excellent patency with nice endothelialisation. As a biological material, microfibers of collagen was used for a sealing substance of vascular prothesis. The microfibers absorbed a large amount of water, which could prevent blood leakage from the graft wall. The graft showed non-thrombogenic property and excellent host cell affinity, resulted in rapid neointima formation. As to autologous tissue, bone marrow was used, since marrow cells can differentiate into any mesenchimal cells with synthesis of growth factors. Marrow cell transplanted vascular prothesis showed rapid capillary ingrowth. These results indicated that the newly designed materials had suitable properties for materials of next generation's artificial organs. (NEDO)

  20. FY 2000 report on the results of the R and D of the fusion domain. Volume 3. Biomolecular mechanism and design; 2000 nendo yugo ryoiki kenkyu kaihatsu. 3. Biomolecular mechanism and design

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of creating cells/tissue assemblies and the molecular machine that substitute for self-organizing and self-repairing functions of a living body outside the body, the basic technology research was conducted, and the FY 2000 results were reported. In the study of 3D cell and tissue module engineering, the following were conducted: study of the surface modification and functional expression of biomaterials, study of the mechanical stress to cartilaginous cells and the response, development of the production method of biodegradable synthetic polymer porous materials, study of organism hard tissue materials/bone remodeling and cultured bone transportation, development of zinc-releasing calcium phosphate ceramics. In the study of biomolecular mechanism and design, 1D unidirectional movement of microtubules by applying microlithography technology, structural study of kinesin-family molecular motor by low temperature microscope, ribozyme and the application to leukemia, basic study on assessment of chemical substances by human cultured cells, study of a low molecule detection system using nucleic acid and peptide. (NEDO)

  1. FY 1996 Report on the research and development project for interdisciplinary area. Part.2. Research on bionic designs; 1996 nendo yugo ryoiki kenkyu kaihatsu. 2. Bionic design ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The objects of this project are to elucidate the self-organization mechanisms of a living body, e.g., functional adaptation to environments and self-restoration, to utilize the molecular interactions in a living body, and thereby to establish the basic technologies for developing molecular motor functions, e.g., artificial organs. Described herein are the FY 1996 results. For creation of living soft tissues, N-ePTFE and Gf are found to be good base materials for cell growth in the serum-free culture, and may be applicable to bio-reactors. Sugar-bound high-molecular-weight compounds and artificial hyaloid body are created. For hard tissue materials, e.g., artificial articulation, the macrophage is activated by englobing worn debris of polyethylene, to activate the broken bone cells that absorb the bone, causing the artificial articulation to become loose. For researches on molecular motor mechanisms, it is considered that myosin changes the head morphology to give a driving force to the muscle, and this concept is studied in detail. The photosynthesizing protein is a molecule related to light and electricity, and is useful as the material to apply the living functions to industrial technologies. The technologies for assembling molecules are studied by utilizing the self-organization functions of living molecules. Development of other molecular machines is also attempted. (NEDO)

  2. Report on result 1998. Research and development on fusion area. Part 3 (biomolecular mechanism and design); 1998 nendo seika hokokusho. Yugo ryoiki kenkyu kaihatsu daisan bunsatsu (bimolecular mechanism and design)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    An organism is a molecular mechanical system consisting of nucleic acid, peptide and protein having a self-forming and a self-repairing function. For the purpose of creating cells, tissues and molecular mechanism alternating these biological functions, their basic technology was developed. Concretely, studies were made on three-dimensional cellular structural module engineering and biomolecular mechanism and design. Studies on biological soft tissue resulted in success by giving atmospheric glow discharge treatment to the inner surface of a tubular PVC. An artificial vitreous body was created using PVA hydrogels. In addition, liver cells were successfully cultured for the first time in the world. Studies on biological hard tissue revealed that osteopontin plays a role of a trigger for the initial differentiation of the osteoblast cell. Further, a basic experiment was carried out on the initial response of the cartilage cell. In the research on the molecular mechanism, examination was made on the mechanism of a double-head molecular motor. Examination was also made on the adjustment of the hydrogenase LB film as an electricity/hydrogen energy conversion element and on the biomolecular mechanism and design. (NEDO)

  3. Report on the achievements in fiscal 1999 of research and development of fusion zones. Volume 1. Next generation light beam foundation technology; 1999 nendo yugo ryoiki kenkyu kaihatsu seika hokokusho. 1. Jisedai hikari kiban gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    With an objective to develop a high-speed high-density light beam recording technology by application of proximity field light, researches were performed on a flat opening type proximity field head, a recording and replaying system for the super lens, the materials thereof, proximity field optical elements, and the application to lithography. As a result of the researches, development was made on a promising light scattering super lens, whose noise level is low and the carrier is stable. Deterioration of the replay signals in association with repeated read-out is caused by instability of the recording film. It was verified, however, that more than 60,000 read-outs are possible by adding oxygen into the recording film material to raise the crystallization temperature. Application of the super lens to organic thin film recording utilizing thermo-chromism was verified to be effective. In discussing the application of the super lens to lithography, a possibility was confirmed to expose a resist film through the super lens structure. A simulation program for the proximity field light was developed, and new findings were acquired. (NEDO)

  4. Report on results 1998. Research and development on fusion area. Part 1 (next generation optical substrate technology); 1998 nendo seika hokokusho. Yugo ryoiki kenkyu kaihatsu daiichi bunsatsu (jisedai hikari kiban gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Emphasis was placed on the research on a planar apertured near-field head and a super-RENS (super-resolution near-field structure) method, as a near-field application element for replacing protruding probes, which has a number of difficult points in developing near-field recording into a practical system, and as a recording and reproducing method. The super-RENS method, as a result of the examination, has become capable of recording/detecting a mark of the minimum 60nm diameter, by the near-field, under conditions such as the most advanced optical disk size and the number of revolution of the disk. This means that a high density recording is possible which is at least 40 times as dense as a DVD (digital versatile disk). It was confirmed by an experiment that the high density was possible in the track pitch direction by the super-RENS method. As a result of the examination on the behavior of the near-field in the super-RENS disk, it revealed that signal detection by the transmitted light which had not been tried before was effective for the improvement of the performance. The smallest detectable mark size was 80nm, in which case CNR (carrier to noise ratio) was 6.4dB. These values are approximately the same level as in the signal detection by reflected light, and are insufficient to verify the superiority. (NEDO)

  5. FY 1997 research and development of fusion domains. Part 3. Studies on next generation optical substrate technologies; 1997 nendo seika hokokusho (yugo ryoiki kenkyu kaihatsu). 3. Jisedai hikari kiban gijutsu no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    With an objective of realizing super large capacity recording technologies largely exceeding the current limits of optical recording and magnetic recording, studies were conducted on application of near-field optics. In the study on recording by using near-field light, it was verified that a mark with approximately the same size as an aperture diameter can be formed on a phase change recording film when a fiber probe with an aperture diameter of about 200 nm is used. However, it was found that the recording using this system takes excessive amount of time. When laser light collected on an objective lens was irradiated pulse-wise, a mark with a minimum width of about 20 nm was observed with high contrast. This will mean that a record with recording density of one terabit/in {sup 2} can be read out. Other studies performed include those on evaluation of effects of polarized light and surface shape on near-field read-out, simulation, mechanism of crystallization in a phase change recording film, recording and playback with ultra-high resolution by using a conformable near-field aperture, fabrication of a flat aperture type near-field light probe array, and the evaluation thereon. 22 refs., 27 figs.

  6. 78 FR 28628 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

    Science.gov (United States)

    2013-05-15

    ........... Subsidiary of Sealy, Inc., Express Employment Professionals. 82,440 Stone Age Interiors, Inc., Colorado Colorado Springs, CO Springs Marble & Granite, Express Employment Professionals. 82,447 Yugo Mold, Inc...

  7. FY 2000 report on the results of the research and development project for utilization of information of high-molecular-weight structures in a living body. Survey on the technological trends of utilizing the reactions with metals in a living body; 2000 nendo seitai kobunshi kozo joho riyo gijutsu kaihatsu chosa hokokusho. 'Seitai kinzoku hanno riyo gijutsu' ni kansuru gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of the survey on the technological trends of utilizing the reactions with metals in a living body, noting the bio-processes effectively coping with the environmental problems. The effects of heavy metals on microorganisms have been investigated on the molecular biology level, but are not fully elucidated. Recently, the microorganisms capable of converting inorganic metal ions in water into the insoluble compounds have been known, leading to possibility of bioremediation to solve pollution by heavy metals, which have detrimental effects on human health. Heavy metals must be recovered, because they are not extinct by decomposition. The plant aided purification has been attracting attention to cope with heavy metals accumulated in soil. Application of bacteria-aided leaching, which is adopted as one ore smelting process, to the technologies for utilizing metals in a living body has been expected, because diversified activities of inanimate matters in extreme environments have been known. Recently, bio-machining of metals aided by Thiobacillus ferrooxidans, one species of independent nutrient bacteria capable of eating metals, has been developed to a potentially viable stage. (NEDO)

  8. FY 1998 annual report on the exploration and production of functional peptide from unutilized protein resources; 1998 nendo miriyo tanpakushitsugen kara no kinosei pepuchido no tansaku to seisan ni kansuru kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This project is aimed at promotion of effective utilization of unutilized resources by transforming histidine-containing peptide (anserine), enzymatically hydrolyzed muscle protein present in lean salmon swimming off the Sanriku District in the spawning season, into functional peptide. A reactor system, comprising an enzyme-immobilized column and rotary bioreactor, is investigated to efficiently produce peptide by enzymatically hydrolyzing the water-insoluble muscle protein. Anserine is isolated by ethanol extraction, ion-exchanging and partition chromatography. The TPTZ and ABTS methods are developed for speeding up measurement of the antioxidant activity. The salmon muscle protein is hydrolyzed by 3 types of enzymes, to measure the free radical erasing activity by the ABTS method. The enzymatically hydrolyzed protein is fractionated by gel permeation chromatography. The fractions having a molecular weight of 10,000 or less show strong antioxidant activity. The hydrolyzed protein shows improved activity by the iron rhodanide method when it has histidine at the center of tripeptide, and strong radical erasing function when it has thyrosine or tryptophan at the carboxyl terminal. (NEDO)

  9. Fiscal 2000 survey report. Development of nucleation control technology for new functional alloy creation and development of new process; 2000 nendo kinosei shingokin sosei no tame no kaku seisei seigyo gijutsu kaihatsu oyobi shin process kaihatsu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the above-said purposes, studies were conducted involving the construction of a database on supercooling and nucleation and on alloy species and functionality. Composition, concentration, supercooling method, container, atmosphere, maximum degree of supercooling, cooling rate, and the contents of the study to be made were investigated in the study of items for databasing. Also, in an experiment dealing with alloy species remaining to be exploited, the coagulation of drop size GaSb alloy was investigated. In the study of the formation of a quasi-stable phase in functional alloy, it was demonstrated that a nonequilibrium or quasi-stable phase might be quantitatively formed by use of a containerless process. In the study of texture control, texture fining by causing flowability was particularly investigated, and it was suggested that not only nucleation but also growth to follow should be properly controlled for the fining of coagulated texture. In the study of simulation of texture prediction, construction of a database on practical alloy nucleation frequency and stochastic simulation of coagulated texture to be built on this database were taken up. (NEDO)

  10. Fiscal 1999 report on results. Development item, 'development of evaluation technique for biocompatibility and the like of porous materials'; 1999 nendo takozairyo no seitai tekigosei nado hyoka gijutsu no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With the purpose of establishing fundamental technologies for ceramic porous materials that are excellent for artificial bone for a living body, evaluation technologies were developed for mechanical properties and biocompatibility, with fiscal 1999 results compiled. Performed for the examination of the mechanical properties were flexural test, compression test, tensile test, shearing test, torsion test, fatigue test, etc., with an evaluation testing method studied assuming that ceramic porous materials were applicable to implanting members. In the evaluation of biocompatibility, five kinds of osteoblast-like cell lines were cultured on a plastic disk and a dense hydroxyapatite disk, with adhesion and proliferation of the cells compared. Since these osteoblast-like cell lines adhere and proliferate on the surface and in the pore of hydroxyapatite, evaluation of the biocompatibility such as cell affinity was found possible with this in vitro method. With the view of obtaining principles for designing new bioactive ceramics, a method was developed for evaluating apatite-forming abilities of metal oxide gels having different compositions and structures in simulated body fluid. (NEDO)

  11. Fiscal 2000 achievement report on the development of polymeric material from renewable resource using biocatalyst; 2000 nendo seitai shokubai wo riyoshita saisei kano shigen kara no kobunshi sozai no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The project aims to develop a biocatalyst-assisted synthesizing method for efficiently manufacturing sugar containing polymers and polylactic acids which generate less environmental impact. The ALP-901 derived from actinomycetes operates best with 5% water content, and remains free of hydrolytic effect even when the rate rises to 20%, and catalyzes transesterification only. The esterification activity of bioprase rose remarkably upon addition of water. A polymer with a molecular weight of scores of thousands was obtained in the polymerization of sugar ester monomers. A sugar undecylenate with a double bond at an end was successfully polymerized. The sugar containing polymer exhibited excellent biodegradability. In a reaction of butanediol and lactide, several types of lactic oligomers different in molecular weight were synthesized. The oligomers were caused to react with divinylcarboxylic acid in the presence of an enzyme, and a polymerizable lactic oligomer was obtained. Furthermore, in a reaction between glucose and lactide, several lactic oligomer derivatives were synthesized, different in molecular weight. In a reaction of the derivatives and divinylcarboxylic acid with an enzyme added thereto, a polymerizable lactic oligomer derivative was obtained, which was brought into polymerization in the presence of a radical polymerization initiator for the production of a high molecular weight gel. (NEDO)

  12. Effect of heat generation from bone cement on bone tissue in total knee arthroplasty; Jinko kansetsu okikaeji no one cement no hatsunetsu ga seitai soshiki ni oyobosu eikyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, M.; Uchida, T. [Kobe University, Kobe (Japan); Iwatsubo, T. [Kobe University, Kobe (Japan). Faculty of Engineering; Kurosawa, M.; Hashimoto, Y. [Kobe University, Kobe (Japan). Faculty of Medicine; Fukushima, H.

    1998-01-25

    Bone cement is often applied to fix the components in a surgical operation, such as TKA (total knee arthroplasty). In this paper, we consider the effect of heat generation from bone cement on bone tissue in TKA by using numerical simulation. First, we applied an axisymmetric model of tibia to finite element method and analyzed heat generation of bone cement. To confirm the results of analysis by experiment, we measured the temperature determined by 6 points i.e., 2 points each in component-cement interface, cement and bone-cement interface. As a result, the temperature determined by analysis agrees with that determined by experiment. Next, we proposed the evaluation formula of the bone necrosis. We constructed a bone necrosis map from the simulation. From the map, we found that the bone necrosis region was about 2 mm from the bone-cement interface. In addition, the bone necrosis is severe at the base of the tibial component. 7 refs., 15 figs., 3 tabs.

  13. Report on the FY 1999 international research cooperation project. Development of polymer materials from renewable resources using biocatalyst; 1999 nendo seitai shokubai wo riyoshita saisei kano shigen kara no kobunshi sozai no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The R and D were conducted of saccharide polymer using biocatalyst and polylactic acid using biocatalyst. In the R and D of technology to synthesize polymerizing saccharide ester, the use of ALP901 led to success in acquiring hydrophobic polymerizing saccharide ester and saccharide ester with phenol residue. A study was also made of technology to synthesize polymerizing divinyl ester. In the study of the optimization of enzyme reaction conditions, the optimum temperature of ester exchange was 50 degrees C, and also under much higher temperature, 100 degrees C, the enzyme reaction was found to proceed with. In the study of the synthesis of polylactic acid, it was impossible to obtain polymer in the case of using ester lactate. However, in the case of using lactic acid, polymer was acquired at the numerical average molecular weight of approximately 1,200. In the study of the optimization of enzyme reaction conditions, polymer with high molecular weight was acquired at the enzyme amount of 5-10%. It was found out that the conversion rate exceeds 98% in the case of doing the reaction for more than 3 days at the enzyme amount of 5-10%. (NEDO)

  14. Fiscal 1999 report on results. Development item, 'development of evaluation technique for biocompatibility and the like of porous materials'; 1999 nendo takozairyo no seitai tekigosei nado hyoka gijutsu no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With the purpose of establishing fundamental technologies for ceramic porous materials that are excellent for artificial bone for a living body, evaluation technologies were developed for mechanical properties and biocompatibility, with fiscal 1999 results compiled. Performed for the examination of the mechanical properties were flexural test, compression test, tensile test, shearing test, torsion test, fatigue test, etc., with an evaluation testing method studied assuming that ceramic porous materials were applicable to implanting members. In the evaluation of biocompatibility, five kinds of osteoblast-like cell lines were cultured on a plastic disk and a dense hydroxyapatite disk, with adhesion and proliferation of the cells compared. Since these osteoblast-like cell lines adhere and proliferate on the surface and in the pore of hydroxyapatite, evaluation of the biocompatibility such as cell affinity was found possible with this in vitro method. With the view of obtaining principles for designing new bioactive ceramics, a method was developed for evaluating apatite-forming abilities of metal oxide gels having different compositions and structures in simulated body fluid. (NEDO)

  15. FY1995 study of the new generation system for the vector type biomagnetmeter and optimization of the system; 1995 nendo jisedai seitai jiki tajigen keisoku system oyobi saitekika no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The most advanced devices for magneto-encephalography(MEG),so far developed are equipped with more than 100 channels which measure the z-component of the magnetic field perpendicular to the surface of the scalp or of the chest, However, there do not exist any multi-channel MEG measuring device capable of measuring the three components of the MEG vectors. The purpose of this study is to develop a SQUID magnetometer with more than 180 channels with the configuration for the three-component vector measurement and to apply the device to the investigation of the higher functions of the brain of which the mechanisms are still largely unknown. Furthermore, it will open up new clinical methods for various discases. 1) We arranged three coils in a column to measure the x,y and z-components of the magnetic field and arranged 60 of those columns so that they cover the whole scalp and measure the 3-component MEG at 60 points simultaneously. 2) We developed a dewar in which more than 200 SQUID elements can be immersed in liquid helium and at the same time the arrangement of the coils allows as close fit as possible to the scalp to be measured. 3) A gantry was developed for the above dewar so that the dewar might be fixed at an arbitary position and its vibrations were minimized. 4) DOIT-type circuit was adopted for the FLL circuit, which realized a simple system. 5) We established a signal processing system which samples the signal from all the SQUID sensors simultaneously at a high sampling rate and analyzes the data efficiently. 6) We measured 3-component MEG signals and found that it can bring out new information useful for investigating the higher functions of the brain. (NEDO)

  16. FY 2000 report on the results of the research and development project for utilization of information of high-molecular-weight structures in a living body. Survey on the technological trends of utilizing the reactions with metals in a living body; 2000 nendo seitai kobunshi kozo joho riyo gijutsu kaihatsu chosa hokokusho. 'Seitai kinzoku hanno riyo gijutsu' ni kansuru gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of the survey on the technological trends of utilizing the reactions with metals in a living body, noting the bio-processes effectively coping with the environmental problems. The effects of heavy metals on microorganisms have been investigated on the molecular biology level, but are not fully elucidated. Recently, the microorganisms capable of converting inorganic metal ions in water into the insoluble compounds have been known, leading to possibility of bioremediation to solve pollution by heavy metals, which have detrimental effects on human health. Heavy metals must be recovered, because they are not extinct by decomposition. The plant aided purification has been attracting attention to cope with heavy metals accumulated in soil. Application of bacteria-aided leaching, which is adopted as one ore smelting process, to the technologies for utilizing metals in a living body has been expected, because diversified activities of inanimate matters in extreme environments have been known. Recently, bio-machining of metals aided by Thiobacillus ferrooxidans, one species of independent nutrient bacteria capable of eating metals, has been developed to a potentially viable stage. (NEDO)

  17. 78 FR 14360 - Investigations Regarding Eligibility To Apply for Worker Adjustment Assistance

    Science.gov (United States)

    2013-03-05

    ... Technologies Miamisburg, OH......... 02/12/13 02/11/13 (State/One-Stop). 82447 Yugo Mold (State/One-Stop... Financial Services LLC, Round Rock, TX......... 02/13/13 02/12/13 Operations Organization (State/One-Stop). 82454 Laserwords, Inc (Workers)... Madison, WI 02/13/13 02/12/13 82455 First Advantage Corporation St...

  18. Report on achievements in fiscal 1998. Venture business growing type consortium - small business creating infrastructure (Development of ultra-high efficiency cultivation system for Hyphomycetes, and application of the system to plant device to manufacture fermentative foods); 1998 nendo itojokin no chokoritsu tairyo baiyo system no kaihatsu to kinosei hakko sho0kuhin seizo plant kiki eno tekiyo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This project has noticed the membrane surface liquid culture method, and researched and developed the following themes with an objective to commercialize the membrane surface liquid culture system and develop novel fermentative foods using this system. Cultivation of Beni-koji bacteria (solid culture of M. pilosus k) is taken up in the model cultivation system. (1) establishment of the membrane surface liquid culture system and development of devices, (2) elucidation of cultivation characteristics of the membrane surface liquid culture system and optimization of the cultivating conditions, and (3) development of fermentative foods. In Item (1), such problems were solved as automation of bacteria planting, long-term pasteurized cultivation, and assurance of clean cultivation broth. In Item (2), it was discovered most suitable that maltose concentration is about 5%, glutamic acid concentration is about 50 mM, the initial culture medium pH is about six, and the cultivation temperature is 30 degree C. In item (3), as a result of mixing this red coloring matter containing cultivation broth into preparation of Miso (bean paste) and soy sauce, products having high {gamma}-Aminobutyric acid and monacholin k content were developed. In addition, while Beni-koji made by solid cultivation had peculiar taste and odor, this drawback was eliminated by using this coloring matter containing cultivation broth. This has made differentiation from conventional products possible. (NEDO)

  19. FY 2000 report on the investigational study on 'the development of micro laboratory for acceleration/manpower saving of the development of functional materials'; 2000 nendo seika hokokusho. Kinosei zairyo kaihatsu kasokuka shoryokuka no tameno maikuro raboratori ni kaihatsu no kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    An investigational study of micro laboratory was conducted in terms of its future needs, technical elements to be needed, image of a viable system, etc. As the needs for micro laboratory, the following were cited: In the creation of functional materials, there are a lot of synthetic parameters, and therefore, improvement in experimental efficiency is needed; For the synthesis under the high temperature atmosphere such as synthesis of ceramics, manpower saving/improvement of efficiency are needed in raising/lowering temperatures of furnace; In the creation of new materials, improvement of controllability is needed in such extreme situations as high temperature, high pressure, environment of hazardous materials and explosive reaction. The above-mentioned needs can be satisfied by making the experimental system smaller. The technical elements applicable to micro laboratory are technology pertaining to combinatorial chemistry and technology pertaining to nano/micro technology. As to the system image, the manufacturing process and system structure were studied for which characteristics of nano/micro technology and combinatorial chemistry were made use of. (NEDO)

  20. FY 1997 report on the study on lamination control technology for functional multi-element oxide thin films by complex beam epitaxy (CxBE) process; 1997 nendo chosa hokokusho (sakutaisen epitaxy (CxBE) ho ni yoru kinosei tagenso sankabutsu usumaku no sekiso seigyo gijutsu ni kansuru kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Complex beam epitaxy (CxBE) process was proposed and demonstrated as new deposition process of multi-element oxide thin films. This process radiates excimer laser onto a metal complex target of ethylenediamine-tetraacetate complex under reduced pressure oxygen atmosphere condition in a reaction vessel to supply raw material onto a heated substrate. This process allowed deposition of YBCO123 phase hetero-epitaxial film onto a single-crystalline SrTiO3 substrate. This process was proved to be promising through study on crystal orientation, composition transcription and surface smoothness of the obtained oxide thin films. In addition, epitaxial ZnO film was also deposited onto a single crystalline Al2O3 substrate by this process. The relation between the obtained film and substrate epitaxy was examined, and photoluminescence of specimens was measured by triple wave of Nd:YAG laser. As a result, it was clarified that the epitaxial ZnO film prepared by this process is useful as laser material. 60 refs., 48 figs., 5 tabs.

  1. Fiscal 1998 research report on application technology of molecular assemblies for a functional protein system (Development of advanced maintenance technology for power plants); 1998 nendo kinosei tanpakushitsu shugotai oyo gijutsu no kenkyu kaihatsu. Hatsuden shisetsuyo kokino mentenansu gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Basic research was made on engineering reappearance and industrial use of the complex function of molecular assemblies for a functional protein system of organisms. In research on a light controllable reaction system by physicochemical technique, construction of a light controllable bioreactor is in promotion. In research on a light controllable reaction system by biochemical technique, researches are in promotion on structure and correlation analysis of photosynthetic protein complex, stabilization of an activity, and conversion of light energy to membrane transport energy using cyanobacteria as material. In research on a molecular recognition controllable reaction system in a fine membrane region, correlation analysis of the structure and function of glutamine receptor channels is in promotion. In addition, researches were made on reconstitution of endocytic micromachinery, a multi-enzyme system for synthesis of glycosphingolipids, a complex redox system by genetic engineering technique, and application technology of molecular assemblies for a functional protein system. (NEDO)

  2. Study of the ablation of extra-low temperature aggregate target and the development of technology of formation of non-equilibrium high-quality functional thin films by the plume control; Gokuteion gyoshutai target no abureshon oyobi purumu seigyo ni yoru hiheiko kohinshitsu kinosei usumaku seisei gijutsu kaihatsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A study was made on factors of the formation of high-quality thin films in the pulse laser deposition (PLD) method, a synthesis method of high-grade functional material thin films. In the experiment, plume current measurements using Cu target were conducted for the control of electric and magnetic fields. Especially, the measuring evaluation was made of the two-dimensional distribution including not only the central part of the substrate placed opposite to the target, but the periphery of the substrate. As a result, the following was found out. The distribution of charged particles in the plume is different in positive charge and negative charge, and the negative charge is dispersed/distributed more widely. Accelerating/decelerating effects of charged particles by the electric field are saturated when the bias voltage absolute value is approximately 100V. Ionization is promoted by giving the magnetic field, and the plume distribution is expanded. Positive charged particles of the plume in the magnetic field are decelerated. In the distribution control by giving the electric field, it is effective to think improvement of the distribution not by attracting charged particles by the electric field, but by shutting out charged particles of the same polarity. 29 refs., 75 figs., 2 tabs.

  3. Report on the results of the fiscal 1997 international research cooperation project. `Joint R and D industrial base technology` (development of functionally graded materials); 1997 nendo kokusai kyoryoku jigyo. `Sangyo kiban gijutsu kyodo kenkyu kaihatsu` keisha kinosei zairyo no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of developing functionally graded materials (FGM/LB) of thermal stress relaxation heat resistant large bulk state which are adoptable to high efficiency engine members, conducted in fiscal 1997 as intermediate target were the experiment for enlargement of the sintering process of FGM/LB with bore of up to 100mm, evaluation of physical properties, the basic development of the fabricating system facility for the commercialization. In the development of heat resistance use FGM/LB fabrication technology, to obtain ZrO2(3Y) stainless steel system FGM/LB, the following were fabricated in each bore size of 50-100mm by the research use large discharge plasma sintering machine: sintered bodies of ceramics/metal single substrate materials and mixed layer single substance materials, and FGM/LB sintered bodies without separation and crack which are composed of 9 intermediate graded layers. The survey was also made on the optimal composition and optimal sintering conditions toward the enlargement without unevenness. In the evaluation of physical properties, ZrO2(3Y)/stainless steel system was selected and test pieces were fabricated to obtain basic data on texture observation, distribution of hardness, fracture toughness, high temperature abrasion resistance, thermal expansion rates, etc. 27 refs., 108 figs., 43 tabs.

  4. Fiscal 1997 report on the results of the international standardization R and D. R and D of the basic evaluation method of functional composite particles; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Kinosei fukugo biryushi no kibanteki hyoka hoho no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper established the basic evaluation method of composite particles manifesting functions which the existing mono-componet particles do not have and aimed at the international standardization of the measuring method of them. To be concrete, the development was studied of methods to evaluate the mechanical bonding state of different composition in composite particles, the chemical bonding state of different composition and the electromagnetic state of the surface of composite particles. As a result, in the evaluation method of the mechanical bonding state of different composition in composite particles, methods to evaluate the bonding state and the large composite bonding state of the coated particle layer were developed to clarify the details to be standardized for each method. In the evaluation method of the chemical bonding state of different composition in composite particles, the electronic energy loss spectroscopy was an effective method to evaluate the chemical bonding state in composite particles of oxide ceramics. Further, in the evaluation method of the electromagnetic field of the surface of composite particles, standard experimental procedures for observing the electromagnetic field by interference of electronic waves were proposed, and the evaluation of the electromagnetic field state of composite particles used ranging from low temperature to high temperature was made possible. 41 refs., 85 figs., 14 tabs.

  5. Fiscal 1999 achievement report on regional consortium research and development project. Regional consortium on energy research in its 3rd year (Research and development of novel method for manufacturing recycling-compatible functional thin film and its application to coloring of glass); 1999 nendo recycle ni tekishita kinosei usumaku no shinki seizoho to chakushoku glass eno oyo ni kansuru kenkyu kaihatsi seika hokokusho. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    A thin film is developed which adds new functions to the surface of glass materials. The method is applied to the coloring of glass for the enhancement of recyclability (for example, by coating colorless glass bottles with colorful thin film) and to the functionalization of glass. Studies are conducted about the assessment of coloring-capable thin film basic characteristics, manufacture of liquids for application, and the manufacture of photosensitive gel thin film using chemically modified metal alkoxides. It is found that use of functional pigments reduces the transmissivity of ultraviolet and infrared rays. A method for manufacturing coloring liquids for application to glass bottles and a method of improving film durability using a 3,2-functional silane are established. Ultrafine gold/cuprous oxide powder, azobenzen based pigments, etc., are deposited on porous glass for the formation of a photoresponsive film. Conditions for color application to round glass bottles are optimized by use of an air spray device. Film exfoliation during colored glass bottle transportation is lessoned to a practically acceptable level by modifying the carton pack configuration. A large roll-type applicator is operated to successfully form a homogenous coating on a 1.8m times 1m glass plate. Double glazing capable of light modulation is also manufactured. (NEDO)

  6. Achievement report for fiscal 1998. Research and development on a new manufacturing method for functional thin films suitable for recycling, and their application to colored glasses (the second year); 1998 nendo seika hokokusho. Recycle ni tekishita kinosei usumaku no shinki seizoho to chakushoku glass eno oyo ni kansuru kenkyu kaihatsu (dai 2 nendo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A new thin film manufacturing method is established to add a function to glass material surface, as a new material technology which harmonizes with global environment, and is suitable for resource re-utilization and energy conservation. It is intended to develop a leading technology to promote recycling of colored glasses by applying this technical method to colored glasses. Fiscal 1998 has implemented subsequently to fiscal 1997 the following subjects in the three research items composed of a new manufacturing method of functional thin films, application of the functional thin films to colored glasses, and the comprehensive investigative studies: establishment of an industrial manufacturing method for color coating liquid and evaluation of basic characteristics of the colored functional thin films, optimization of element technology for photo-sensitive gel films by means of chemically modifying metallic alkoxide, tests of forming films on glass bottles and plate glasses by using a coating machine installed in fiscal 1997, design and prototype fabrication of a new demonstration coating machine, and analysis on thermal decomposition of the colored thin films. Optimization was performed on the element technology for manufacturing sol-gel functional thin films, and a survey was carried out on recycling systems of colored glasses adopted in Europe. (NEDO)

  7. 大政奉還と「職制案(新官制擬定書)」 : 「公議」の人事

    OpenAIRE

    寺島, 宏貴; Terashima, Hirotaka

    2013-01-01

    This paper is extended to the philosophy of "Kougi Seitai" (a thought of the parliamentary system 公議政体) to carry out "Kougi" as the open forum in the New Government before the Restoration of Imprial Rule (王政復古) in an, 1867. Concretely, reevaluation of the "Shoku- Sei-An" (New government organization idea) which was authored and edited by Sakamoto Ryoma (坂本龍馬) together with Ozaki Saburo (尾崎三良) from political history view. It considered specially one of the precondition of publishing the "Shok...

  8. FY 2000 report on the results of the regional consortium R and D project - Regional consortium energy. First year report. Development of a next generation biopolymer information measuring system based on the nano channel electrophoresis; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium energy. Nano channel denki eido ni motozuku jisedai seitai kobunshi joho keisoku system no kaihatsu (dai 1 nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    On the basis of the nano channel electrophoresis technology, the construction was proceeded with of a system which integrates the basic process such as reaction, separation and detection needed for measuring biopolymer information and analyzes a number of samples simultaneously and with high accuracy/high sensitivity. Studies were made in the following three fields: 1) development of the basement technology on extraction/amplification/separation/detection of biopolymer; 2) development of micro-processing technology and system design and study on the development of device; 3) comprehensive investigational study. In 1), developmental technology is divided into the following: technology to effectively fraction/refine biopolymer from biological samples, technology for recognition control and manipulation of biopolymer, technology of amplification use micro-reaction of biopolymer, multiple selection technology of biopolymer using the specific molecular recognition, and technology for ultra-high speed separation of biopolymer. As to the multiple selection technology, DNA terminal recognizing hemin is altered by thiol group and connected to the surface of electrode to make an electrode type hemin recognition device. (NEDO)

  9. Report on achievements in fiscal 1999 on research and development of the glycocluster controlled biological molecule synthesizing under the industrial and scientific technology research and development theme [university collaborated type]. Bio-fiber manufacturing technology of glycocluster utilizing type; 1999 nendo glycocluster seigyo seitai bunshi gosei gijutsu seika hokokusho (glycocluster riyogata bio sen'i seizo gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes the achievements in fiscal 1999 on development of the technology to manufacture glycocluster controlled biological molecules, particularly bio-fibers. It was made clear for the first time that the method for synthesizing glycoside and sugar chain using solid ultra-strong acid can be a new method for polysaccharide synthesis (polycondensation reaction) which is extremely simple and versatile as a result of using the solid ultra-strong acid. It can also be applied to general glycoside synthesis. In glycopeptide synthesis of the regular sequence type using high-functional condensation reaction, such a condensation agent as diphenyl phosphoryl azide was found effective in polymerization reaction without protection of glycopeptide, which has been impossible conventionally, and was found to have high versatility as a method for synthesizing mucin glycoproteins widely distributed naturally. In simplified synthesis of physiologically active glycopeptide, notice was given to tyrosine which is not glycosylated in the natural world, even though having hydroxyl groups in side chains as in serine and threonine. A method was established to introduce sugar chains into this hydroxyl group. This method exhibits power also in the synthesis of physiologically active glycopeptide of non-natural type. The paper describes also the comprehensive survey. (NEDO)

  10. FY 2000 report on the R and D of the particulate utilization type creation technology of biological connective substances. Survey of the technical trend overseas; 2000 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho. Kaigai gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper summarized the reports on the results of Japanese engineers' participating in the related scientific meetings held overseas as a survey report on the trend of the overseas technology. The scientific meetings they participated in were: 1) Impact of Genomics on Medicine and Pharmacogenomics Europe (Amsterdam; May 15-26, 2000), 2) Drug Discovery Technology 2000 (Boston; August 10-20, 2000), 3) Biotechnology 2000 (Berlin; September 3-12, 2000), 4) PacificChem 2000 (Hawaii; December 14-21, 2000), 5) 4th Winter Conference on Medicinal and Bioorganic Chemistry (Seattle; January 27 - February 4, 2001). Impact of Genomics on Medicine was composed of the following five fields: microarrays, proteomics, functional genomics and target validation, genetic variation technology, and applications of SNP analysis (joint session). Pharmacogenomics Europe was composed of the following four fields: applications of SNP analysis (joint session), SNP assays, targets and compounds, and clinical applications. (NEDO)

  11. Report on survey in fiscal 2000 on the survey and research on technology to integrate artificial bone system with living organism, taking individual difference into account; 2000 nendo kotaisa wo koryoshita jinkokotsu system no seitai tekigoka gijutsu ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Survey and research have been performed on artificial bones as to the bone growth and bone absorption mechanism, nature demanded in artificial bones, and ideal concept of artificial bones. As a result of the survey, the following matters were made clear: Ti alloy draws high attention as the artificial bone material; and up-to-date research is being made to promote fusion of the Ti alloy bone with natural bones by putting apatite covering on the Ti alloy bone by means of chemical treatment, wherein porous layers are produced on the surface that do not form inclination from a dense bone to a sponging bone, or from high density to low density, but produce the reverse inclination, as in the cross section structure of natural bones. Reports have been given from the dentistry, oral surgery, plastic surgery, and orthopedic surgery on the followings: a fact that magnesium affects greatly the stimulation of osteoblasts; a case where absorption of the mandibular bone has been created clinically due to Ti-made mini-plate; and a case where even Ti has been eluted into soft tissues. Artificial bones made of magnesium structure is being studied as one of the solutions thereof. (NEDO)

  12. Report on surveys in fiscal 1999 on technological trends in overseas countries in research and development of the technology to create biological bonding substances utilizing particulates under the industrial and scientific technology research and development theme (university collaborated type); 1999 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu kaigai gijutsu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes the surveys in fiscal 1999 on technological trends in overseas countries in research and development of the technology to create biological bonding substances utilizing particulates. Attendance was made at the U.S. Biochemistry and Molecular Biology '99 to survey signal transmission in cells, new molecules related to gene transcription control, and the mechanisms thereof. A visit was made to the U.S.A. to collect the chromatin research information. In order to analyze efficiently specific biological receptors relative chemical substances, and structure an activity evaluation system, attendance was made at a society meeting in Britain to incorporate the high throughput screening technology. Attendance was made at a publication meeting in the U.S.A. to understand the current status of the DNA micro-array process. Visits were made to American business entities and societies to survey information that contributes to efficient separation and analysis of biological receptors. American business entities and universities were visited to survey the cDNA manifestation library system, technological trends, and researches on intra-living organism systems by using molecular biology. Visits were made to research institutes and societies in the U.S.A. to survey the method for carrying ligands onto latex beads, combinatorial chemistry, and solid phase synthesis. (NEDO)

  13. Fiscal 2000 project of inviting proposals for international joint research - invitation for international proposal (Novel No.2). Achievement report on development of high-strength ultralight biocompatible implant material using porous titanium; 2000 nendo kokusai kyodo kenkyu teian kobo jigyo - kokusai teian kobo (shinki No.2). Takoshitsu chitan ni yoru seitai shinwasei kokyodo chokeiryo implant zai no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    An implant material manufacturing technology is developed for which a titanium based metal material is made porous and osteoblasts are allowed into holes in the material surface for the establishment of fixation and mechanical similarity between the material and bones. Activities are conducted in the six fields of (1) the establishment of material adjusting technology, (2) establishment of high-porosity sintering technology, (3) research and development of hydrogen-aided technology of pore formation, (4) improvement on mechanical characteristics/dimensions evaluation technology, (5) establishment and implementation of biocompatibility evaluation technology, and (6) the development of technology for commercializing high-porosity implant materials. In field (3), pure titanium and titanium hydride are pulverized and classified, and very fine powders only are mixed and sealed into a capsule made of pure iron, which is subjected to extrusion into bulk and then heated to a high temperature for the generation of hydrogen gas for the formation of a limitless number of pores. Pure titanium and a Ti-Al-V-Mo-Fe alloy easy to treat in a low-temperature superplastic process are used for the study of the process. In field (6), in the wake of element technology development, commercialization of implant materials is considered, technical tasks to discharge before new industry creation are made clear, and measures in this connection are studied. (NEDO)

  14. FY2000 report of the research results of medical/engineering cooperative research project, fundamental research on diagnosis/treatment systems by imaging higher order information of living systems; 2000 nendo igaku kogaku renkeigata kenkyu jigyo koji seitai joho no gazoka ni yoru shindan chiryo system ni kansuru kiban kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The research and development efforts are made for the fundamental technology necessary for visualizing higher order information of the physiological functions of the organs and tissues at high precision and non-invasively, and for supporting treatment of the malignant tumor and cerebrovascular diseases, while keeping the functions of the affected organs intact, and the FY 2000 results are reported. The program for the visualizing techniques includes development of the pulse sequence for commercializing the proton and carbon magnetic resonance spectrometric imaging (MRSI), and development of the prototype 1H/13C-detecting circuit. The program for the real-time analysis of tissue dynamics includes production of cine-images of, e.g., the peristalsis of the uterus, to accumulate the basic data for monitoring dynamics of the abdominal organs. The program for systems for supporting treatment while keeping the functions of the affected organs intact includes the MR-aided temperature-sensing systems, and improvement of the techniques for correcting motion of the measured organs by extracting characteristic points in the images taken and of MR-aided temperature sensing accuracy. The program for radiotherapy and ultrasonic therapy of malignant tumors in the body stems includes development of high-accuracy irradiation system aided by real-time three-dimensional body motion monitoring system. (NEDO)

  15. FY 2000 report on the R and D of the particulate utilization type creation technology of biological connective substances. Survey of the technical trend overseas; 2000 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho. Kaigai gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper summarized the reports on the results of Japanese engineers' participating in the related scientific meetings held overseas as a survey report on the trend of the overseas technology. The scientific meetings they participated in were: 1) Impact of Genomics on Medicine and Pharmacogenomics Europe (Amsterdam; May 15-26, 2000), 2) Drug Discovery Technology 2000 (Boston; August 10-20, 2000), 3) Biotechnology 2000 (Berlin; September 3-12, 2000), 4) PacificChem 2000 (Hawaii; December 14-21, 2000), 5) 4th Winter Conference on Medicinal and Bioorganic Chemistry (Seattle; January 27 - February 4, 2001). Impact of Genomics on Medicine was composed of the following five fields: microarrays, proteomics, functional genomics and target validation, genetic variation technology, and applications of SNP analysis (joint session). Pharmacogenomics Europe was composed of the following four fields: applications of SNP analysis (joint session), SNP assays, targets and compounds, and clinical applications. (NEDO)

  16. Report on achievements in fiscal 1999 on research and development of the technology to create biological bonding substances utilizing particulates under the industrial and scientific technology research and development theme [university collaborated type]. Research and development of the technology to create biological bonding substances utilizing particulates; 1999 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes the achievements in fiscal 1999 on development of the technology to create biological bonding substances utilizing particulates. In fixing ligands onto particulates, it is necessary that various compounds be fixed with their receptor bonding specificity maintained. Therefore, carboxylic acid, thiol and bromoacetyl groups were introduced into the particulates. Capping them by using methoxyacetyl was found capable of suppressing non-specific adsorption. Opioid compounds were synthesized for their fixation onto particulates for selection and separation. Carrying particulate bonding precursors in latex beads was realized. Synthesis will continue on opiod compounds in which amide groups are introduced into different positions to provide the particulate carrying ligands with diversity. Biological receptors for different compounds were obtained and refined by using compound fixing particulates. Refinement and acquisition were possible on FK506 bonded protein in a short time from cell extraction liquid by using the fixing particulates for the FK506 bonded protein. The paper also describes analysis of bonded domains, and position-specific fixation of the biological receptors. (NEDO)

  17. Fiscal 1997 report on the results of the international standardization R and D. System to make comprehensive evaluation of potential health effects of next generation image media; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Jisedai media seitai eikyo sogo hyoka system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper proposed the international standardization for the use of next generation image media by evaluating health effects of the use of next generation image media such as head mounted display and 3D monitor. A method to comprehensively evaluate health effects was studied with the design friendly to humans and standardization on safety as final targets. Themes were divided into the autonomous nervous system and the measuring system. The development was carried out of a method to evaluate the autonomous nervous function by the dynamic state of blood circulation and pupillary reflex as well as the development of portable sphygmomanometer and pupillometer. Using these developmental instruments and conventional instruments, measurement was made of blood pressure, cardiac output, respiration, pupil size, eyeball movement and focus accommodation. A possibility was suggested of obtaining the uniform elucidation also in case analytical changes of individual parameters cannot be extracted or consistency cannot be seen in the course of changes. The paper determined basic standards for the experimental use stereoscopic image, made measuring use 3D images, and collected realtime data by the overall simultaneous measuring system constructed. 109 refs., 166 figs., 18 tabs.

  18. Fiscal 1998 achievement report on regional consortium research and development project. Regional consortium of venture business fostering type--Creation of key industries (Development of technologies for manufacturing and utilizing various biological regulatory substances using Hokkaido-produced biomasses as materials); 1998 nendo Dosan biomass wo genryo to shita kakushu seitai chosetsu kino busshitsu no seisan riyo gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The efforts aim to meet consumers' needs for products that will prevent lifestyle diseases or the like. For this purpose, substances answering the purpose are extracted from Hokkaido-produced agricultural and aquatic biomasses, and prepared for testing. Researches are conducted on how they behave in the enzyme, cell, and biological systems, and active substances are isolated and identified. In relation to the aquatic biomass, a technology is established of extracting and separating DHA (docosahexaenoic acid), EPA (eicosapentaenoic acid), taurine, etc., which are multivalent unsaturated fatty acids effective in preventing lifestyle diseases, from the unused parts of the squid. In relation to the agricultural biomass, antimicrobial active substances are extracted and separated from small fruit plants such as the chicory. Long-keeping foods are tentatively produced by the addition of dried powder of the chicory root tuber. In the elucidation of various biological regulatory substances contained in the Hokkaido-produced biomasses, they are tested for their abilities to resist microbes and active oxygen. Furthermore, verification tests are conducted by administering the substances to the senescence-accelerated mouse (SAM). (NEDO)

  19. Achievement report for fiscal 1998. Research and development of technologies for creating new bioaffinity molecules using submicron beads (Energy use rationalization related technology practicalization); 1998 nendo biryushi riyogata seitai ketsugo busshitsunado sosei gijutsu no kenkyu kaihatsu seika hokokusho. Energy shiyo gorika kankei gijutsu jitsuyoka kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In the effort to develop chemical substance/bioreceptor analysis technology using submicron beads, polystyrene core/polyglycidyl methacrilate beads are used in a study started about a detachable spacer using newly developed fixation technology. In the development of bioaffinity chemical substance refining technology, two kinds of sugars and several kinds of aromatic aldehydes serve as building blocks in the construction of a library, and studies are made of analyses using liquid chromatography and mass spectrography. In the development of novel substance creation technology based on information on the analysis of chemical substance/bioreceptor, in an effort at developing technologies for creating novel function provided chemical substances, heterocyclic compounds, alkaloids, and sugar compounds are selected and their syntheses in the liquid phase and solid phase are studied, which is again for the construction of a library. (NEDO)

  20. Fiscal 1998 industrial science and technology R and D theme (University coordination type). Research report on R and D of technologies for creating new bioaffinity molecules using submicron beads; 1998 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 result on the entrusted research 'R and D of technologies for creating new bioaffinity molecules using submicron beads' based on 'Industrial science and technology R and D system.' As for development of technologies for analyzing chemical- biomolecule complexes using submicron affinity beads, for molecule design of DNA to be connected with cisplatin, telomere DNA was employed as a target DNA of cisplatin, and cisplatin-modified DNA (Pt-DNA) was synthesized. Reaction condition for Pt-DNA connected beads was established, and affinity beads with Pt-DNA were prepared. As for development of organic receptor refining technology, proteins bound to cisplatin-DNA were preliminarily analyzed, showing that the Pt-DNA is a proper target chemical substance. It is the first evidence that certain proteins recognize cisplatin-damaged telomere DNA. In addition, introduction of the equipment for developing analysis technology of binding domains, development of technology to create organic receptors with new functions, and general research on the titled technologies were carried out. (NEDO)

  1. FY1999 report of the research results of medical/engineering cooperative research project, fundamental research on diagnosis/treatment systems by imaging higher order information of living systems; 1999 nendo igaku kogaku renkeigata jigyo koji seitai joho no gazoka ni yoru shindan chiryo system ni kansuru kiban kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The research and development efforts are made for the fundamental technology necessary for visualizing higher order information of the organs and tissues at high precision and non-invasively, and for supporting treatment of the malignant tumor and cerebrovascular diseases, while keeping the functions of the affected organs intact, and the FY 1999 results are reported. The program for the visualizing techniques includes designs of the pulse sequence for a 1H/13C-MRSI analyzer which observes proton and carbon by magnetic resonance spectrometric imaging (MRSI), and starts its programming. The program for the real-time analysis of tissue dynamics starts the designs of the coil for pelvis receiving the signals for monitoring dynamics of the abdominal organs at superhigh field. The program for systems for supporting treatment while keeping the functions of the affected organs intact starts development of the MR-matching heating system, for which the applications are designed, and measures against eddy current and resistance of the system as a whole to noise are studied. Development of the high-precision supersonic wave and far-infrared ray irradiation systems is started, in order to establish the treatment aided by radiant ray while keeping functions of the affected organs intact. (NEDO)

  2. "It All Ended in an Unsporting Way": Serbian Football and the Disintegration of Yugoslavia, 1989-2006

    OpenAIRE

    Mills, Richard

    2009-01-01

    Part of a wider examination into football during the collapse of Eastern European Communism between 1989 and 1991, this article studies the interplay between Serbian football and politics during the period of Yugoslavia's demise. Research utilizing interviews with individuals directly involved in the Serbian game, in conjunction with contemporary Yugoslav media sources, indicates that football played an important proactive role in the revival of Serbian nationalism. At the same time the Yugos...

  3. Failed catharsis after the Second World War

    OpenAIRE

    Bijelić Biljana

    2002-01-01

    The Second World War is not relevant only in historical and political context. Its unsolved character is usually mentioned as one of the causes of the 1990 war. The after war policy of identity is especially relevant for today’s difficulties in consideration of collective responsibility and achieving reconciliation between communities which were in conflict. Croatian example of war crimes against Serbs in the Second World War is especially illustrative. However, that is only one of many Yugos...

  4. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium energy field / Study on a new production process of functional thin films suitable for recycling and its application to colored glasses (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium energy bun`ya / recycle ni tekishita kinosei usumaku no shinki seizoho to chakushoku glass eno oyo ni kansuru kenkyu kaihatsu (daiichi nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the fiscal 1997 result. Using organic pigment and dye, the basic composition of sol-gel colored coating liquid for glass bottles and sheets was selected to clarify characteristics of gel films. Moreover, chemical modification and optical sensitivity of metallic alkoxide were studied to obtain a trially produced colored glass bottle use coating liquid. As to sheet glass, strength of the gel film is low, which requires further improvement. In relation to optical sensitive gel films, the reaction of various metallic alkoxides and {beta}-diketones was discussed to clarify chemical reactivity with utltaviolet rays. Trial design was also conducted of the coating equipment. The paper examined by literature the present status of recycling systems of colored glass bottles and the technical development in European countries. The problem is a method to wash colored bottles for sterilization. To make colored films durable, it is necessary to form films by organic-inorganic hybrid thin films. Also discussed was a possibility of changing the washing method by administrative guidance. 27 refs., 62 figs., 42 tabs.

  5. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the application technology of functional protein complex (R and D of the high-functional maintenance technology for power plants); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Kinosei tanpakushitsu shugotai oyo gijutsu no kenkyu kaihatsu (hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In order to develop advanced maintenance technology for power generation facilities, application technology of functional protein complexes is under investigation. On a light controllable enzymatic reaction system, construction of a light controllable bio-reactor by physico-chemical and bio- chemical techniques, and structure and functions of a photosynthetic protein complex using thermophilic cyanobacteria as material are under investigation. On a molecular mechanism for recognition and reaction of receptor proteins, structure analysis and engineering application of glutamate receptor channels of a synaptic transmission system, and basic study and material proteins for artificial structures using endocytic micromachinery, and a multi-enzyme system for synthesis of glycosphingolipids are under investigation. On a complex oxidation/reduction system by genetic engineering technique, construction of a high- efficiency stable system with functionally arranged oxidoreductase and electron transmission systems in biomembranes is in promotion. Research work was also made on molecular assemblies for a functional protein system. 166 refs., 91 figs., 9 tabs.

  6. Randomized Comparison of the Therapeutic Effect of Acupuncture, Massage, and Tachibana-Style-Method on Stiff Shoulders by Measuring Muscle Firmness, VAS, Pulse, and Blood Pressure

    Directory of Open Access Journals (Sweden)

    Kazuhiro Tachibana

    2012-01-01

    Full Text Available To compare the therapeutic efficacy of acupuncture, massage, and Tachibana-Ryojutsu (one of Japanese traditional body balance therapy techniques (SEITAI, on stiff shoulders, the subjects’ muscle firmness, blood pressure, pulse, VAS, and body temperature were measured before and after the treatment. Forty-seven volunteer subjects gave written informed consent to participate in this study. The subjects were randomly divided into three groups to receive acupuncture, massage, or Tachibana-Ryojutsu. Each therapy lasted for 90 seconds. The acupuncture treatment was applied by a retaining-needle at GB-21, massage was conducted softly on the shoulders, and Tachibana-Ryojutsu treated only the muscles and joints from the legs to buttocks without touching the shoulders or backs. The study indicated that the muscle firmness and VAS of the Tachibana-Ryojutsu group decreased significantly in comparison with the acupuncture and massage groups after treatment.

  7. FY 1998 report on the results of the R and D for acceleration of biological resource information basement preparation (bioinformatics). Third revision. Development of measurement technology of interaction among biological molecules (Development of high-precise automatic analysis technology for a trace amount of cellular protein); 1998 nendo seibutsu shigen joho kiban seibi kasokuka kenkyu kaihatsu (bioinformatics) seika hokokusho. Seitai bunshikan sogo sayo no keisoku gijutsu no kaihatsu (saibonai chobiryo tanpakushitsu no koseido jido kaiseki gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    An experimental study was conducted with the aim of developing the technology to acquire/analyze in high sensitivity manifestation proteins existing in a trace amount and in various kinds, concretely, signal transfer molecules, transcription factors, etc. which exist in one cell. After extracting a trace amount of functional proteins for analysis from the specified functional cell, the study was made on the following: precise separation and detection technique for cellular proteins, efficient digestion technique and contaminant elimination technique of stained protein, precise separation of peptides by micro-LC technique, precise peptide molecular mass detection of each separated peptide with high sensitivity, reconstruction of protein structure by computer algorithm. As a result, as to the analysis level, an analysis technology with high sensitivity of a 50 fmol level was established as against the existing level of several pmol. Moreover, after the separation/digestion of proteins by the 2D electrophoresis, a series of the process automation system was completed which is high-precise separation using protein columns - molecular analysis - structure prediction by computer. (NEDO)

  8. De héroes, naciones milenarias y guerras fratricidas. Tres mitos fundacionales en tres relatos historiográficos de la nación mexicana

    OpenAIRE

    Oscar Javier Linares Londoño

    2011-01-01

    La interpretación canónica de la independencia de México explica los hechos que van de 1810 a 1821 como la emancipación de la nación mexicana, pueblo milenario que remonta su identidad nacional a los mexicas, habitantes del Valle de México, antes de la llegada de los españoles. Por trescientos años el pueblo fue oprimido bajo el yugo español, y logra su independencia gracias al movimiento nacionalista de sus héroes. Esta interpretación construida por los relatos historiográficos del siglo...

  9. Obsolescencia programada como fenómeno cultural real

    OpenAIRE

    Liliana Karina Niño Rubio

    2015-01-01

    Los modelos económicos han mutado a través del tiempo dependiendo de las necesidades sociales, históricas y culturales; ya haya sido los esclavos, la tierra o el dinero, siempre ha habido un factor claro que se ha mantenido. Quienes tuvieron el poder desde el primer modelo económico son los mismos que lo poseen en la actualidad, al igual que quienes vivieron bajo su yugo seguimos siendo los mismos. A pesar de los cambios sufridos por el modelo económico reinante, el que más ha perdurado y nos...

  10. De héroes, naciones milenarias y guerras fratricidas. Tres mitos fundacionales en tres relatos historiográficos de la nación mexicana About heroes, ancient nations and fratricidal wars: Three foundational myths in three Mexican nation's historiographic stories

    OpenAIRE

    Óscar Javier Linares Londoño

    2010-01-01

    La interpretación canónica de la independencia de México explica los hechos que van de 1810 a 1821 como la emancipación de la nación mexicana, pueblo milenario que remonta su identidad nacional a los mexicas, habitantes del Valle de México, antes de la llegada de los españoles. Por trescientos años el pueblo fue oprimido bajo el yugo español, y logra su independencia gracias al movimiento nacionalista de sus héroes. Esta interpretación construida por los relatos historiográficos del siglo XIX...

  11. Del posol a la Coca Cola: cambios en las prácticas alimentarias en dos comunidades tojolabales

    Directory of Open Access Journals (Sweden)

    Antonio de Jesús Nájera Castellanos

    2010-08-01

    Full Text Available Tras la liberación del yugo finquero, los tojolabales obtuvieron su “libertad” para engancharse a una nueva forma de vida que ha traído consigo modificaciones y cambios en diversas prácticas cotidianas, entre ellas las prácticas alimentarias. Las vías de comunicación y diversos factores sociales y económicos como la iglesia, los servicios de salud, los apoyos y programas gubernamentales y la comercialización, han incidido en las últimas cuatro décadas en los cambios en las prácticas alimentarias de las familias tojolabales, particularmente en el consumo.

  12. Welcome to the Largest International Fair of the Balkans: The Borderli-ness of Kara Boaz Fair

    Directory of Open Access Journals (Sweden)

    S. Antova

    2015-08-01

    Full Text Available The location of this study is the border area of the North – West Bulgaria at Bulgarian – Serbian border, near the town of Belogradchik. As a result of several times redrawing of nation state borders between Serbia (Yugoslavia and Bulgaria during 20th century the borderland population, named Torlatsi had been separated. The Kada Boaz Fair creates a safe space and time for meeting of the separated families and friends, living at the both sides of the border. Very significant point is that the place of the Kada Boaz Fair is widely exploited of all local and governmental authorities from both sides since 2000 as a place to re-construct economic and social relations. The aim of the paper is to discuss which are the factors influencing the real openness and the making borders pervious. The paper explores the border crossing of Bulgarian and Serbian population, living at both sides of national borders on an everyday level, while trying to explain its notions in different periods of time (Socialist past, Yugo-embargo, EU accession of Bulgaria. The presentation answers the question how people use the political situations and politicians so that they could benefit from certain circumstances on their everyday level of life.

  13. De héroes, naciones milenarias y guerras fratricidas. Tres mitos fundacionales en tres relatos historiográficos de la nación mexicana

    Directory of Open Access Journals (Sweden)

    Oscar Javier Linares Londoño

    2011-08-01

    Full Text Available La interpretación canónica de la independencia de México explica los hechos que van de 1810 a 1821 como la emancipación de la nación mexicana, pueblo milenario que remonta su identidad nacional a los mexicas, habitantes del Valle de México, antes de la llegada de los españoles. Por trescientos años el pueblo fue oprimido bajo el yugo español, y logra su independencia gracias al movimiento nacionalista de sus héroes. Esta interpretación construida por los relatos historiográficos del siglo XIX, está basada en loque llamaré los mitos fundacionales de la nación: el mito de la nación milenaria, el mito de loshéroes y el mito de la pugna irreconciliable entre criollos y españoles. La historiografía decimonónica difundirá estos mitos con la firme intención de legitimar el movimiento independentista y de dotar de un relato homogéneo a la naciente nación.

  14. OS FRUTOS DE MAIO: RESENHA HISTÓRICA DO MOVIMENTO ESTUDANTIL NA AMÉRICA LATINA NO INICIO DO SÉCULO XX

    Directory of Open Access Journals (Sweden)

    José Rubens Lima Jardilino

    2008-01-01

    Full Text Available En este artículo me propongo examinar las cuestiones de la historia social de los movimientos estudiantiles en el continente, tomando como caso de Argentina, Perú, Cuba y México, por supuesto lo hago en plena colaboración con los especialistas con los cuales mantengo diálogo intenso y los tengo como referencia de mi narrativa sobre el tema. Los movimientos estudiantiles reciben diferentes interpretaciones de su protagonismo juvenil. En Francia, incluso con los socialistas en el poder, hubo un trabajo de la desfiguración del movimiento poco después de su término. Mayo del 68 fue establecido definitivamente como una revuelta de la juventud, o como la juventud es considerada el tiempo del amor y pasiones, el movimiento de 1968, se asimila como una aspiración de los jóvenes en la búsqueda de suprimir el yugo de los padres y de los tabúes sexuales. Por otra parte, hay que reconocer en el movimiento francés sus fuertes contenidos culturales y su firme deseo de cambiar las estructuras institucionales de la modernidad - la Universidad, la Familia, señalando como un movimiento social que se solidarizan a asociaciones como de los agricultores y de los trabajadores en general en la lucha por un cambio cultura. También hay quienes afirman que su legado ha dejado sólo el peso de la droga a un mundo postmoderno y esotérico. En frente de esta diversidad de visiones, nosotros tomamos la libertad de entender el movimiento de los 68 en una perspectiva histórica del papel de los jóvenes en búsqueda de los cambios en las estructuras sociales, desde principios de siglo.

  15. BIENESTAR SOSTENIBLE EN EL TRABAJO: REVISIÓN Y REFORMULACIÓN

    Directory of Open Access Journals (Sweden)

    José Mª Peiró

    2014-01-01

    Full Text Available Uno de los principales objetivos de la psicología del trabajo y de las organizaciones es promover tanto el bienestar como el rendimiento de los empleados. Sin embargo, el yugo de la crisis económica actual tiraniza este objetivo, amenazando sin piedad la sostenibilidad del bienestar y del rendimiento alcanzado en décadas anteriores. El decremento en uno de esos factores puede afectar el otro, dando lugar a un círculo vicioso. En este contexto, uno de los mayores retos para los psicólogos organizacionales es convertir esta tendencia en un círculo virtuoso, en el que promover altos niveles de bienestar en el trabajo suponga una mejora del rendimiento y vice-versa, lo que en este trabajo denominamos “sinergia del bienestar-productivo sostenible”. Sin embargo, estudios anteriores no han obtenido resultados concluyentes al respecto. La falta de rigor y de consideración de las conceptualizaciones más contemporáneas del bienestar y el rendimiento laboral, como praxis común, son parte de la causa de esos resultados. El objetivo del presente trabajo es proporcionar una revisión de los estudios previos, que permita sustentar una nueva reformulación del concepto de bienestar y de productividad. También se plantea integrar los conceptos más contemporáneos, revisando la “tesis del trabajador feliz y productivo” y utilizando como marco de referencia la teoría de emociones positivas de la “ampliación y construcción” de Fredrickson. Finalmente, se discute la adecuación y la sostenibilidad de modelos alternativos sobre el “trabajador infeliz y productivo” y el “trabajador feliz e improductivo”.

  16. Obsolescencia programada como fenómeno cultural real

    Directory of Open Access Journals (Sweden)

    Liliana Karina Niño Rubio

    2015-01-01

    Full Text Available Los modelos económicos han mutado a través del tiempo dependiendo de las necesidades sociales, históricas y culturales; ya haya sido los esclavos, la tierra o el dinero, siempre ha habido un factor claro que se ha mantenido. Quienes tuvieron el poder desde el primer modelo económico son los mismos que lo poseen en la actualidad, al igual que quienes vivieron bajo su yugo seguimos siendo los mismos. A pesar de los cambios sufridos por el modelo económico reinante, el que más ha perdurado y nos acompaña hasta nuestros días es el capitalismo, el cual nació gracias a la industrialización, los avances tecnológicos y la adquisición de bienes de consumo. En teoría es un modelo sólido y funcional que ha subsistido bastante tiempo, sin embargo, este ha llegado a convertirse en un problema social, económico, cultural y ecológico. La sociedad de consumo masivo en la que nos hemos convertido, no solo puede llegar a generar escalofríos, sino que también está generando un gran daño a nuestro medio ambiente; solo en Estados Unidos cada habitante genera en promedio 2,3 kg de basura al día; o, por ejemplo, en el mar Caspio, situado al Norte de Irán y al extremo sur del Cáucaso con 374 000 km2 (el mar cerrado más grande del mundo recoge las aguas servidas y la contaminación de una de las regiones más pobladas e industrializadas de Rusia a través del río Volga, el más importante de los 130 cursos de agua que lo alimentan. Al comienzo de los años 90, el nivel de contaminación del Volga era considerado realmente alarmante y sigue empeorando desde entonces.

  17. Elevation of urinary liver-type fatty acid binding protein after cardiac catheterization related to cardiovascular events

    Directory of Open Access Journals (Sweden)

    Kamijo-Ikemori A

    2015-08-01

    Full Text Available Atsuko Kamijo-Ikemori,1,3 Nobuyuki Hashimoto,2 Takeshi Sugaya,1 Katsuomi Matsui,1 Mikako Hisamichi,1 Yugo Shibagaki,1 Fumihiko Miyake,2 Kenjiro Kimura1 1Department of Nephrology and Hypertension, 2Department of Cardiology, 3Department of Anatomy, St Marianna University School of Medicine, Kawasaki, Kanagawa, Japan Purpose: Contrast medium (CM induces tubular hypoxia via endothelial damage due to direct cytotoxicity or viscosity. Urinary liver-type fatty acid binding protein (L-FABP increases along with tubular hypoxia and may be a detector of systemic circulation injury. The aim of this study was to evaluate the clinical usefulness of detecting increases in urinary L-FABP levels due to administration of CM, as a prognostic biomarker for cardiovascular disease in patients without occurrence of CM-induced nephropathy undergoing cardiac catheterization procedure (CCP. Methods: Retrospective longitudinal analyses of the relationship between urinary L-FABP levels and occurrence of cardiovascular events were performed (n=29. Urinary L-FABP was measured by ELISA before CCP, and at 6, 12, 24, and 48 hours after CCP. Results: Urinary L-FABP levels were significantly higher at 12 hours (P<0.05 and 24 hours (P<0.005 after CCP compared with before CCP, only in the patients with occurrence of cardiovascular events (n=17, but not in those without cardiovascular events (n=12. The parameter with the largest area under the curve (0.816 for predicting the occurrence of cardiovascular events was the change in urinary L-FABP at 24 hours after CCP. The difference in urinary L-FABP levels (ΔL-FABP ≥11.0 µg/g creatinine between before CCP and at 24 hours after CCP was a risk factor for the occurrence of cardiovascular events (hazard ratio, 4.93; 95% confidence interval, 1.27–19.13; P=0.021. Conclusion: Measurement of urinary L-FABP before CCP and at 24 hours after CCP in patients with mild to moderate renal dysfunction may be an important indicator for risk

  18. De héroes, naciones milenarias y guerras fratricidas. Tres mitos fundacionales en tres relatos historiográficos de la nación mexicana About heroes, ancient nations and fratricidal wars: Three foundational myths in three Mexican nation's historiographic stories

    Directory of Open Access Journals (Sweden)

    Óscar Javier Linares Londoño

    2010-07-01

    Full Text Available La interpretación canónica de la independencia de México explica los hechos que van de 1810 a 1821 como la emancipación de la nación mexicana, pueblo milenario que remonta su identidad nacional a los mexicas, habitantes del Valle de México, antes de la llegada de los españoles. Por trescientos años el pueblo fue oprimido bajo el yugo español, y logra su independencia gracias al movimiento nacionalista de sus héroes. Esta interpretación construida por los relatos historiográficos del siglo XIX, está basada en lo que llamaré los mitos fundacionales de la nación: el mito de la nación milenaria, el mito de los héroes y el mito de la pugna irreconciliable entre criollos y españoles. La historiografía decimonónica difundirá estos mitos con la firme intención de legitimar el movimiento independentista y de dotar de un relato homogéneo a la naciente nación.The canonical interpretation of the independence of Mexico explains the facts that go from 1810 to 1821 as the emancipation of the Mexican nation, ancient nation that traced back its national identity to the Mexican people, inhabitants of the Valley of Mexico before the Spanish arrived. Oppressed for three hundred years under Spanish rule, the Mexican nation achieves its independence through nationalist movement of its heroes. This interpretation, built by the nineteenth-century historiographical tales, is based on what we call the nation founding myths: the myth of the ancient nation, the myth of the heroes, and the myth of irreconcilable conflict between Creoles and Spanish people. Nineteenth-century historiography will spread these myths with the firm intention of legitimizing the independence movement and give a consistent story to the emerging nation.

  19. A Clinical Radioisotope Scanner for Cylindrical and Section Scanning; Dispositif de Scintigraphie pour l'Exploration en Spirale et dans Plusieurs Plans; Tsilindricheskij radioizotopnyj ckehhep dlya tsilindricheskogo i sektsionnogo skennirovaniya; Aparato Gammagrafico para Exploraciones Cilindricas y por Secciones

    Energy Technology Data Exchange (ETDEWEB)

    Kuhl, D. E. [Department of Radiology, University of Pennsylvania, Philadelphia, PA (United States)

    1964-10-15

    superposent sur le scintigramme, qui est alors difficile a interpreter. Au cours de l'exploration, le patient est installe sur un lit cantilever entre deux detecteurs a scintillation montes aux extremites d'un.support qui se deplace de maniere a permettre le mouvement des detecteurs en trois sens: longitudinal, transversal et rotatoire. On aveille tout particulierement a assurer un controle precis de la position et de la vitesse des detecteurs par l 'incorporation de servo-mecanismes. Le systeme d'enregistrement comprend: a) un stockage permanent des donnees sur bandes de papier perfore; b) un moyen de reproduction rapide des images scintigraphiques sur un oscilloscope a rayons cathodiques; c) un dispositif electronique d'exploitation des signaux. L'auteur donne des exemples des applications cliniques de cet appareil, notamment de l'exploration en spirale du foie et de l'exploration dans plusieurs plans du cerveau. (author) [Spanish] El aparato descrito en la memoria se construyo para estudiar las ventajas que puede ofrecer el empleo de un detector de radiaciones que se desplace sobre el enfermo de manera distinta de la habitual. Al estudiar un organo aproximadamente redondo, como el higado, el aparato es animado de un movimiento cilindrico a fin de poder explorar una parte mayor del organo. Otra modificacion consiste en la exploracion por secciones, que permite separar imagenes de estructuras radiativas en planos situados a diversas profundidades del organismo. Este procedimiento tiene particular interes cuando las imagenes de las diversas estructuras corporales se superponen en el registro dando resultados dificiles de interpretar. Durante la exploracion, el paciente se encuentra sobre una camilla sujeta por uno de sus extremos y situada entre dos detectores de centelleo montados en las extremidades de una pieza en forma de yugo capaz de desplazarse'en direccion longitudinal y transversal y de describir un movimiento giratorio. Se ha prestado particular atencion a la