Obstetrical correlates of the first time cesarean section, compared with the repeated cesarean section

International Nuclear Information System (INIS)

Rukh, G.; Akhtar, S.

2007-01-01

To determine the clinical and epidemiological characteristics in patients having their first cesarean section (FCS) and compare it with findings in patients with repeated cesarean section (RCS). This study included all the women who gave birth by cesarean sections, 817 of the total 5992 deliveries, at this unit during the study period. Data on potential risk factors for the first cesarean section (FCS) and repeated cesarean section (RCS were extracted from medical records, which were reviewed and compared between these two groups of women. Data were statistically analyzed with student t-test for comparison between means and Chi-square test for comparison between percentages. Crude odds ratio (OR) with 95% confidence interval (95% CI) were calculated. Significance was taken at p 0.05). The frequency of first cesarean section and repeat cesarean section is high in our setup. Adequate following of the programs to diminish the percentage of FCS by curtailing its predisposing factors is needed. (author)

Cross sections for atmospheric corrections

International Nuclear Information System (INIS)

Meyer, J.P.; Casse, M.; Westergaard, N.

1975-01-01

A set of cross sections for spallation of relativistic nuclei is proposed based on (i) the best available proton cross sections, (ii) an extrapolation to heavier nuclei of the dependence on the number of nucleons lost of the 'target factor' observed for C 12 and O 16 by Lindstrom et al. (1975), in analogy with Rudstam's formalism, and (iii) on a normalization of all cross sections to the total cross sections for production of fragments with Asub(f) >= 6. The obtained cross sections for peripheral interactions are not inconsistent with simple geometrical considerations. (orig.) [de

WheelerLab: An interactive program for sequence stratigraphic analysis of seismic sections, outcrops and well sections and the generation of chronostratigraphic sections and dynamic chronostratigraphic sections

OpenAIRE

Adewale Amosu; Yuefeng Sun

2017-01-01

WheelerLab is an interactive program that facilitates the interpretation of stratigraphic data (seismic sections, outcrop data and well sections) within a sequence stratigraphic framework and the subsequent transformation of the data into the chronostratigraphic domain. The transformation enables the identification of significant geological features, particularly erosional and non-depositional features that are not obvious in the original seismic domain. Although there are some software produ...

Multitrajectory eikonal cross sections

International Nuclear Information System (INIS)

Turner, R.E.

1983-01-01

With the use of reference and distorted transition operators, a time-correlation-function representation of the inelastic differential cross section has recently been used to obtain distorted eikonal cross sections. These cross sections involve straight-line and reference classical translational trajectories that are unaffected by any internal-state changes which have occurred during the collision. This distorted eikonal theory is now extended to include effects of internal-state changes on the translational motion. In particular, a different classical trajectory is associated with each pair of internal states. Expressions for these inelastic cross sections are obtained in terms of time-ordered cosine and sine memory functions using the Zwanzig-Feshbach projection-operator method. Explicit formulas are obtained in the time-disordered perturbation approximation

Dosimetry and Calibration Section

International Nuclear Information System (INIS)

Otto, T.

1998-01-01

The two tasks of the Dosimetry and Calibration Section at CERN are the Individual Dosimetry Service which assures the personal monitoring of about 5000 persons potentially exposed to ionizing radiation at CERN, and the Calibration Laboratory which verifies all the instruments and monitors. This equipment is used by the sections of the RP Group for assuring radiation protection around CERN's accelerators, and by the Environmental Section of TISTE. In addition, nearly 250 electronic and 300 quartz fibre dosimeters, employed in operational dosimetry, are calibrated at least once a year. The Individual Dosimetry Service uses an extended database (INDOS) which contains information about all the individual doses ever received at CERN. For most of 1997 it was operated without the support of a database administrator as the technician who had assured this work retired. The Software Support Section of TIS-TE took over the technical responsibility of the database, but in view of the many other tasks of this Section and the lack of personnel, only a few interventions for solving immediate problems were possible

FEMA DFIRM Cross Sections

Data.gov (United States)

Minnesota Department of Natural Resources — FEMA Cross Sections are required for any Digital Flood Insurance Rate Map database where cross sections are shown on the Flood Insurance Rate Map (FIRM). Normally...

The Golden Section as Optical Limitation.

Science.gov (United States)

Elliott, Mark A; Kelly, Joy; Friedel, Jonas; Brodsky, Jennifer; Mulcahy, Paul

2015-01-01

The golden section, ϕ = (1 + √5)/2 = 1.618... and its companion ϕ = 1/ϕ = ϕ -1 = 0.618..., are irrational numbers which for centuries were believed to confer aesthetic appeal. In line with the presence of golden sectioning in natural growth patterns, recent EEG recordings show an absence of coherence between brain frequencies related by the golden ratio, suggesting the potential relevance of the golden section to brain dynamics. Using Mondrian-type patterns comprising a number of paired sections in a range of five section-section areal ratios (including golden-sectioned pairs), participants were asked to indicate as rapidly and accurately as possible the polarity (light or dark) of the smallest section in the patterns. They were also asked to independently assess the aesthetic appeal of the patterns. No preference was found for golden-sectioned patterns, while reaction times (RTs) tended to decrease overall with increasing ratio independently of each pattern's fractal dimensionality. (Fractal dimensionality was unrelated to ratio and measured in terms of the Minkowski-Bouligand box-counting dimension). The ease of detecting the smallest section also decreased with increasing ratio, although RTs were found to be substantially slower for golden-sectioned patterns under 8-paired sectioned conditions. This was confirmed by a significant linear relationship between RT and ratio (p < .001) only when the golden-sectioned RTs were excluded [the relationship was non-significant for the full complement of ratios (p = .217)]. Image analysis revealed an absence of spatial frequencies between 4 and 8 cycles-per-degree that was exclusive to the 8-paired (golden)-sectioned patterns. The significance of this was demonstrated in a subsequent experiment by addition of uniformly distributed random noise to the patterns. This provided a uniform spatial-frequency profile for all patterns, which did not influence the decrease in RT with increasing ratio but abolished the elevated

The Golden Section as Optical Limitation.

Directory of Open Access Journals (Sweden)

Mark A Elliott

Full Text Available The golden section, ϕ = (1 + √5/2 = 1.618... and its companion ϕ = 1/ϕ = ϕ -1 = 0.618..., are irrational numbers which for centuries were believed to confer aesthetic appeal. In line with the presence of golden sectioning in natural growth patterns, recent EEG recordings show an absence of coherence between brain frequencies related by the golden ratio, suggesting the potential relevance of the golden section to brain dynamics. Using Mondrian-type patterns comprising a number of paired sections in a range of five section-section areal ratios (including golden-sectioned pairs, participants were asked to indicate as rapidly and accurately as possible the polarity (light or dark of the smallest section in the patterns. They were also asked to independently assess the aesthetic appeal of the patterns. No preference was found for golden-sectioned patterns, while reaction times (RTs tended to decrease overall with increasing ratio independently of each pattern's fractal dimensionality. (Fractal dimensionality was unrelated to ratio and measured in terms of the Minkowski-Bouligand box-counting dimension. The ease of detecting the smallest section also decreased with increasing ratio, although RTs were found to be substantially slower for golden-sectioned patterns under 8-paired sectioned conditions. This was confirmed by a significant linear relationship between RT and ratio (p < .001 only when the golden-sectioned RTs were excluded [the relationship was non-significant for the full complement of ratios (p = .217]. Image analysis revealed an absence of spatial frequencies between 4 and 8 cycles-per-degree that was exclusive to the 8-paired (golden-sectioned patterns. The significance of this was demonstrated in a subsequent experiment by addition of uniformly distributed random noise to the patterns. This provided a uniform spatial-frequency profile for all patterns, which did not influence the decrease in RT with increasing ratio but abolished

VBAC (Vaginal Birth After C-Section)

Science.gov (United States)

Vaginal birth after C-section (VBAC) Overview If you've delivered a baby by C-section and ... between scheduling a repeat C-section or attempting vaginal birth after C-section (VBAC). For many women, ...

Constitutionality of section 7 of the Atomic Energy Act: Section 20 GG 'Kalkar decision'. [German Federal Republic

Energy Technology Data Exchange (ETDEWEB)

1978-06-01

OVG Muenster, decision dated Aug. 18th, 1977 - VII A 338/74: 'Section 7 of the Atomic Energy Act disagrees with the constitution in as far as it also allows the licensing of FBR type reactores'. The grounds upon which the judgment is based are given in detail: According to the opinion of the Senate, section 7 of the Atomic Energy Act does not conform to the principle of separation of powers (section 20, sub-section 2, sentence 2 GG), to the principle of parliamentary democracy (section 20, sub-section 1 and 2 GG) and to the principles of the law and order state (section 20, sub-section 3 GG) in as far as the present version enables the licensing of fast breeders.

Complication of cesarean section: pregnancy on the cicatrix of a previous cesarean section.

Science.gov (United States)

Wang, Weimin; Long, Wenqing; Yu, Qunhuan

2002-02-01

To probe into the clinical manifestation, diagnosis, as well as treatment of pregnancy on the cicatrix of a previous cesarean section at the uterine isthmus in the first trimester. Analysis of 14 patients with pregnancy on the cicatrix of a previous cesarean section at the uterine isthmus in the first trimester was made after conservative treatment by drugs from January 1996 to December 1999. The 14 patients with a pregnancy on the cicatrix of a previous cesarean section at the uterine isthmus in the first trimester were painless, had slight vaginal bleeding, and concurrently had increased serum beta-subunit human chorionic gonadotropin (beta-HCG). Doppler ultrasonic examination revealed an obvious enlargement of the previous cesarean section cicatrix in the uterine isthmus, and found a gestational sac or mixed mass attached to the cicatrice, with a very thin myometrium between the gestational sac and bladder walls. Among the 14 patients, 12 patients had crystalline trichosanthes injected into the cervix, mifepristone taken orally, or methotrexate in the form of intramuscular injection. Following this procedure, their serum beta-HCG dropped to normal. The other 2 patients had a total hysterectomy. Pregnancy on the cicatrix of a previous cesarean section at the uterine isthmus in the first trimester is a complication of cesarean section. Early diagnosis and effective conservative treatment by drugs are instrumental in decreasing the potential occurrence of uterine rupture, which is also conducive to preserving the patient's future fertility.

14 CFR Section 4 - General

Science.gov (United States)

2010-01-01

... UNIFORM SYSTEM OF ACCOUNTS AND REPORTS FOR LARGE CERTIFICATED AIR CARRIERS Balance Sheet Classifications Section 4 General (a) The balance sheet accounts are designed to show the financial condition of the air... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false General Section 4 Section 4 Aeronautics and...

Comparison of integral cross section values of several cross section libraries in the SAND-II format

International Nuclear Information System (INIS)

Zijp, W.L.; Nolthenius, H.J.

1976-09-01

A comparison of some integral cross-section values for several cross-section libraries in the SAND-II format is presented. The integral cross-section values are calculated with the aid of the spectrum functions for a Watt fission spectrum, a 1/E spectrum and a Maxwellian spectrum. The libraries which are considered here are CCC-112B, ENDF/B-IV, DETAN74, LAPENAS and CESNEF. These 5 cross-section libraries used have all the SAND-II format. Discrepancies between cross-sections in the different libraries are indicated but not discussed

Turbine airfoil having outboard and inboard sections

Science.gov (United States)

Mazzola, Stefan; Marra, John J

2015-03-17

A turbine airfoil usable in a turbine engine and formed from at least an outboard section and an inboard section such that an inner end of the outboard section is attached to an outer end of the inboard section. The outboard section may be configured to provide a tip having adequate thickness and may extend radially inward from the tip with a generally constant cross-sectional area. The inboard section may be configured with a tapered cross-sectional area to support the outboard section.

Photon-splitting cross sections

International Nuclear Information System (INIS)

Johannessen, A.M.; Mork, K.J.; Overbo, I.

1980-01-01

The differential cross section for photon splitting (scattering of one photon into two photons) in a Coulomb field, obtained earlier by Shima, has been integrated numerically to yield various differential cross sections. Energy spectra differential with respect to the energy of one of the outgoing photons are presented for several values of the primary photon energy. Selected examples of recoil momentum distributions and some interesting doubly or multiply differential cross sections are also given. Values for the total cross section are obtained essentially for all energies. The screening effect caused by atomic electrons is also taken into account, and is found to be important for high energies, as in e + e - pair production. Comparisons with various approximate results obtained by previous authors mostly show fair agreement. We also discuss the possibilities for experimental detection and find the most promising candidate to be a measurement of both photons, and their energies, at a moderately high energy

Relativistic photon-Maxwellian electron cross sections

International Nuclear Information System (INIS)

Wienke, B.R.; Lathrop, B.L.; Devaney, J.J.

1986-01-01

Temperature corrected cross sections, complementing the Klein-Nishina set, are developed for astrophysical, plasma, and transport applications. The set is obtained from a nonlinear least squares fit to the exact photon-Maxwellian electron cross sections, using the static formula as the asymptotic basis. Two parameters are sufficient (two decimal places) to fit the exact cross sections over a range of 0-100 keV in electron temperature, and 0-1 MeV in incident photon energy. The fit is made to the total cross sections, yet the parameters predict both total and differential scattering cross sections well. Corresponding differential energy cross sections are less accurate. An extended fit to (just) the total cross sections, over the temperature and energy range 0-5 MeV, is also described. (author)

Integral nucleus-nucleus cross sections

International Nuclear Information System (INIS)

Barashenkov, V.S.; Kumawat, H.

2003-01-01

Expressions approximating the experimental integral cross sections for elastic and inelastic interactions of light and heavy nuclei at the energies up to several GeV/nucleon are presented. The calculated cross sections are inside the corridor of experimental errors or very close to it. Described in detail FORTRAN code and a numerical example of the cross section approximation are also presented

Jet inclusive cross sections

International Nuclear Information System (INIS)

Del Duca, V.

1992-11-01

Minijet production in jet inclusive cross sections at hadron colliders, with large rapidity intervals between the tagged jets, is evaluated by using the BFKL pomeron. We describe the jet inclusive cross section for an arbitrary number of tagged jets, and show that it behaves like a system of coupled pomerons

Neutron-induced fission cross sections

International Nuclear Information System (INIS)

Weigmann, H.

1991-01-01

In the history of fission research, neutron-induced fission has always played the most important role. The practical importance of neutron-induced fission rests upon the fact that additional neutrons are produced in the fission process, and thus a chain reaction becomes possible. The practical applications of neutron-induced fission will not be discussed in this chapter, but only the physical properties of one of its characteristics, namely (n,f) cross sections. The most important early summaries on the subject are the monograph edited by Michaudon which also deals with the practical applications, the earlier review article on fission by Michaudon, and the review by Bjornholm and Lynn, in which neutron-induced fission receives major attention. This chapter will attempt to go an intermediate way between the very detailed theoretical treatment in the latter review and the cited monograph which emphasizes the applied aspects and the techniques of fission cross-section measurements. The more recent investigations in the field will be included. Section II will survey the properties of cross sections for neutron-induced fission and also address some special aspects of the experimental methods applied in their measurement. Section Ill will deal with the formal theory of neutron-induced nuclear reactions for the resolved resonance region and the region of statistical nuclear reactions. In Section IV, the fission width, or fission transmission coefficient, will be discussed in detail. Section V will deal with the broader structures due to incompletely damped vibrational resonances, and in particular will address the special case of thorium and neighboring isotopes. Finally, Section VI will briefly discuss parity violation effects in neutron-induced fission. 74 refs., 14 figs., 3 tabs

Comparison of integral cross section values of several cross section libraries in the SAND-II format

International Nuclear Information System (INIS)

Zijp, W.L.; Nolthenius, H.J.

1978-01-01

A comparison of some integral cross section values for several cross section libraries in the SAND-II format is presented. The integral cross section values are calculated with aid of the spectrum functions for a Watt fission spectrum, a 1/E spectrum and a Maxwellian spectrum. The libraries which are considered here are CCC-112B, ENDF/B-IV, DETAN74, LAPENAS and CESNEF. These 5 cross section libraries used have all the SAND-II format. (author)

Cross-section methodology in SIMMER

International Nuclear Information System (INIS)

Soran, P.D.

1975-11-01

The cross-section methodology incorporated in the SIMMER code is described. Data base for all cross sections is the ENDF/B system with various progressing computer codes to group collapse and modify the group constants which are used in SIMMER. Either infinitely dilute cross sections or the Bondarenko formalism can be used in SIMMER. Presently only a microscopic treatment is considered, but preliminary macroscopic algorithms have been investigated

Cross-section methodology in SIMMER

International Nuclear Information System (INIS)

Soran, P.D.

1976-05-01

The cross-section methodology incorporated in the SIMMER code is described. Data base for all cross sections is the ENDF/B system with various progressing computer codes to group collapse and modify the group constants which are used in SIMMER. Either infinitely dilute cross sections or the Bondarenko formalism can be used in SIMMER. Presently only a microscopic treatment is considered, but preliminary macroscopic algorithms have been investigated

Evaluated cross section libraries

International Nuclear Information System (INIS)

Maqurno, B.A.

1976-01-01

The dosimetry tape (ENDF/B-IV tape 412) was issued in a general CSEWG distribution, August 1974. The pointwise cross section data file was tested with specified reference spectra. A group averaged cross section data file (620 groups based on tape 412) was tested with the above spectra and the results are presented in this report

Radiocaesium accumulation in the mycorrhizal fungi Lactarius rufus and Inocybe longicystis, in upland Britain, following the Chernbobyl accident

International Nuclear Information System (INIS)

Dighton, J.; Horrill, A.D.

1988-01-01

Ratios of the radionuclides 137 Cs to 134 Cs show that a large proportion of the 137 Cs present in the fruit bodies is derived from pre-Chernobyl fallout from atomic weapons testing. This suggests accumulation of the radionuclide by fungal mycelia. (author)

Electron collision cross sections of mercury

International Nuclear Information System (INIS)

Suzuki, Susumu; Kuzuma, Kiyotaka; Itoh, Haruo

2006-01-01

In this paper, we propose a new collision cross section set for mercury which revises the original set summarized by Hayashi in 1989. Hanne reported three excitation collision cross sections (6 3 P 0 , 6 3 P 1 , 6 3 P 2 ) determined from an electron beam experiment in 1988. As a matter for regret, no attentive consideration was given to combining these three excitation cross sections with the cross section set of Hayashi. Therefore we propose a new set where these three excitation cross sections are included. In this study, other two excitation cross sections (6 1 P 1 , 6 3 D 3 ) except for the three excitation collision cross sections (6 3 P 0 , 6 3 P 1 , 6 3 P 2 ) are taken from the original set of Hayashi. The momentum transfer cross section and the ionization collision cross section are also taken from Hayashi. A Monte Carlo Simulation (MCS) technique is applied for evaluating our new cross section set. The present results of the electron drift velocity and the ionization coefficient are compared to experimental values. Agreement is secured in relation to the electron drift velocity for 1.5 Td 2 ) is the reduced electric field, E (V/cm) is the electric field, N (1/cm 3 ) is the number density of mercury atoms at 0degC, 1 Torr, E/N is also equal to 2.828 x 10 -17 E/p 0 from the relation of the ideal gas equation, p 0 (Torr) is gas pressure at 0degC, 1 Torr=1.33322 x 10 -2 N/cm -2 and 10 -17 V/cm 2 is called 1 Td. Thus it is ensured that our new cross section set is reasonable enough to be used up to 100 eV when considering with the electron drift velocity and the ionization coefficient. (author)

Background-cross-section-dependent subgroup parameters

International Nuclear Information System (INIS)

Yamamoto, Toshihisa

2003-01-01

A new set of subgroup parameters was derived that can reproduce the self-shielded cross section against a wide range of background cross sections. The subgroup parameters are expressed with a rational equation which numerator and denominator are expressed as the expansion series of background cross section, so that the background cross section dependence is exactly taken into account in the parameters. The advantage of the new subgroup parameters is that they can reproduce the self-shielded effect not only by group basis but also by subgroup basis. Then an adaptive method is also proposed which uses fitting procedure to evaluate the background-cross-section-dependence of the parameters. One of the simple fitting formula was able to reproduce the self-shielded subgroup cross section by less than 1% error from the precise evaluation. (author)

Clean Water Act (Section 404) and Rivers and Harbors Act (Sections 9 and 10)

International Nuclear Information System (INIS)

1992-01-01

This Reference Book contains a current copy of the Clean Water Act (Section 404) and the Rivers and Harbors Act (Sections 9 and 10) and those regulations that implement those sections of the statutes and appear to be most relevant to DOE activities. The document is provided to DOE and contractor staff for informational purposes only and should not be interpreted as legal guidance. Updates that include important new requirements will be provided periodically. Questions concerning this Reference Book may be directed to Mark Petts, IH-231 (FTS 896-2609 or Commercial 202/586-2609)

Coronary CT angiography characteristics of OCT-defined thin-cap fibroatheroma. A section-to-section comparison study

Energy Technology Data Exchange (ETDEWEB)

Yang, Dong Hyun; Koo, Hyun Jung; Kang, Joon-Won; Lim, Tae-Hwan [Asan Medical Center, University of Ulsan College of Medicine, Department of Radiology and Research Institute of Radiology, Seoul (Korea, Republic of); Kang, Soo-Jin; Chang, Mineok; Lee, Pil Hyung; Roh, Jae-Hyung; Ahn, Jung-Min; Park, Duk-Woo; Lee, Seung-Whan; Lee, Cheol Whan; Park, Seong-Wook; Park, Seung-Jung; Kim, Young-Hak [Asan Medical Center, University of Ulsan College of Medicine, Department of Cardiology, Seoul (Korea, Republic of); Baek, Seunghee [Asan Medical Center, University of Ulsan College of Medicine, Department of Clinical Epidemiology and Biostatistics, Seoul (Korea, Republic of); Han, Seungbong [Gachon University, Department of Applied Statistics, Gyeonggi-do (Korea, Republic of); Mintz, Gary S. [Cardiovascular Research Foundation, New York, NY (United States)

2018-02-15

To evaluate whether plaque characteristics as assessed by coronary computed tomography angiography (CCTA) were associated with the presence of a thin-cap fibroatheroma (TCFA) - a precursor of plaque rupture - defined by optical coherence tomography (OCT) in a section-to-section-level comparison. From 28 symptomatic patients, 31 coronary lesions were evaluated on 727 cross-sections co-registered by both CCTA and OCT. CCTA plaque characteristics included low attenuation plaque (LAP, <30 HU), napkin ring sign (NRS), positive remodelling (PR, remodelling index ≥1.10), and spotty calcification and plaque area and plaque burden. By OCT, presence of TCFA, lumen area and arc of lipid were determined. OCT revealed a TCFA in 69 (9.4%) sections from 19 (61.2 %) lesions. In per-section analysis, OCT-TCFA showed higher frequency of CCTA-detected LAP (58.0% vs. 18.5%), NRS (31.9% vs. 8.8%) and PR (68.1% vs. 48.0%) and greater plaque burden (70.6% vs. 61.9%) as compared to sections without OCT-TCFA (all p < 0.05). In multivariable analysis, LAP (odds ratio [OR] 4.05, p < 0.001) and NRS (OR 2.47, p = 0.005) were associated with OCT-TCFA. CCTA-measured lumen area correlated well with OCT-measured lumen area (R = 0.859, limits of agreement -0.5 ± 3.7 mm{sup 2}). LAP and NRS in CCTA were associated with the presence of OCT-defined TCFA in a section-to-section comparison. (orig.)

Electron-impact cross sections of Ne

International Nuclear Information System (INIS)

Tsurubuchi, S.; Arakawa, K.; Kinokuni, S.; Motohashi, K.

2000-01-01

Electron-impact absolute emission cross sections were measured for the 3p→3s transitions of Ne. Excitation functions of the 3s→2p first resonance lines were measured in the energy range from the threshold to 1000 eV by a polarization-free optical method and relative cross sections were normalized to the absolute values, (41.0±5.4)x10 -19 cm 2 for the 73.6 nm line and (7.1±1.0)x10 -19 cm 2 for the 74.4 nm line, which were determined at 500 eV. The integrated level-excitation cross sections of Suzuki et al for the 1s 2 and 1s 4 levels were combined with the corresponding 3p→3s cascade cross sections obtained in this paper to give absolute emission cross sections for the resonance lines. The level-excitation cross sections of the 1s 2 and 1s 4 states in Paschen notation were determined from the threshold to 1000 eV by subtracting 3p→3s cascade cross sections from the corresponding 3s→2p emission cross sections of the resonance lines. A large cascade contribution is found in the emission cross section of the resonance lines. It is 28.5% for the 73.6 nm line and 49.6% for the 74.4 nm line at 40 eV, and 17.0 and 61.8%, respectively, at 300 eV. (author)

Methodology of failed section location in case of leaks in PGN-200M sectional steam generator

International Nuclear Information System (INIS)

Kuznetsov, A.A.; Govorov, P.P.; Nosov, Yu.V.; Karavaev, A.P.

2009-01-01

The article considers a way of the failed section location when indications of water-sodium reaction emerge in PGN-200M sectional steam generator of the BN-600 power unit. The selection of diagnostic parameters used to locate the failed section is justified. Various alternative locations of leaks have been simulated [ru

Neutron cross sections: Book of curves

International Nuclear Information System (INIS)

McLane, V.; Dunford, C.L.; Rose, P.F.

1988-01-01

Neuton Cross Sections: Book of Curves represents the fourth edition of what was previously known as BNL-325, Neutron Cross Sections, Volume 2, CURVES. Data is presented only for (i.e., intergrated) reaction cross sections (and related fission parameters) as a function of incident-neutron energy for the energy range 0.01 eV to 200 MeV. For the first time, isometric state production cross sections have been included. 11 refs., 4 figs

Differential Top Cross-section Measurements

CERN Document Server

Fenton, Michael James; The ATLAS collaboration

2017-01-01

The top quark is the heaviest known fundamental particle. The measurement of the differential top-quark pair production cross-section provides a stringent test of advanced perturbative QCD calculations. The ATLAS collaboration has performed detailed measurements of those differential cross sections at a centre-of-mass energy of 13 TeV. This talk focuses on differential cross-section measurements in the lepton+jets final state, including using boosted top quarks to probe our understanding of top quark production in the TeV regime.

Cross-sectional anatomy for computed tomography

International Nuclear Information System (INIS)

Farkas, M.L.

1988-01-01

This self-study guide recognizes that evaluation and interpretation of CT-images demands a firm understanding of both cross-sectional anatomy and the principles of computed tomography. The objectives of this book are: to discuss the basic principles of CT, to stress the importance of cross-sectional anatomy to CT through study of selected cardinal transverse sections of head, neck, and trunk, to explain orientation and interpretation of CT-images with the aid of corresponding cross-sectional preparations

Vaginal birth after C-section

Science.gov (United States)

... this page: //medlineplus.gov/ency/patientinstructions/000589.htm Vaginal birth after C-section To use the sharing ... the same way again. Many women can have vaginal deliveries after having a C-section in the ...

Continuity between DSM-5 Section II and Section III personality traits for obsessive-compulsive personality disorder.

Science.gov (United States)

Liggett, Jacqueline; Sellbom, Martin; Bach, Bo

2018-01-01

Obsessive-compulsive personality disorder (OCPD) is formally operationalized in Section II of the DSM-5 by a heterogeneous collection of 8 categorical criteria. Section III contains an alternative model operationalizing personality disorders via dimensional personality traits and associated impairment. The extent to which the personality traits used to define OCPD in Section III correspond with the Section II operationalization of the disorder is contested. The current study aims to contribute to the evidence base necessary to solidify the optimal trait profile for this disorder via a more fine-tuned examination of OCPD. The research questions were examined using a clinical sample of 142 Danish adults who completed the Structured Clinical Interview for DSM-IV Axis II Disorders and the Personality Inventory for DSM-5 to index both the Sections II and III (personality traits) operationalizations of OCPD, respectively. Bivariate correlations supported Rigid Perfectionism and Perseveration as traits relevant to OCPD; however, hierarchical regression analyses indicated that of the 4 traits used in the Section III operationalization of OCPD, only Rigid Perfectionism uniquely predicted OCPD (p traits of Submissiveness, Suspiciousness, and (low) Impulsivity were also found to uniquely predict OCPD and its specific symptoms in a regression model. These findings indicate that the traits proposed in Section III are only partially aligned with the traditional, Section II conceptualization of OCPD, and may be augmented by incorporating Submissiveness, Suspiciousness, and (low) Impulsivity. In light of the current findings and existing literature, a modified constellation of traits to operationalize OCPD is likely justified. Copyright © 2017 John Wiley & Sons, Ltd.

Section for qualitative methods (Letter)

OpenAIRE

Todd, Z.; Madill, A.

2004-01-01

Qualitative research methods are increasingly used in all areas of psychology. We have proposed a new Section – the Qualitative Methods in Psychology Section – for anyone with an interest in using these research methods.

Nuclear Forensics and Radiochemistry: Cross Sections

Energy Technology Data Exchange (ETDEWEB)

Rundberg, Robert S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-11-08

The neutron activation of components in a nuclear device can provide useful signatures of weapon design or sophistication. This lecture will cover some of the basics of neutron reaction cross sections. Nuclear reactor cross sections will also be presented to illustrate the complexity of convolving neutron energy spectra with nuclear excitation functions to calculate useful effective reactor cross sections. Deficiencies in the nuclear database will be discussed along with tools available at Los Alamos to provide new neutron cross section data.

NDS multigroup cross section libraries

International Nuclear Information System (INIS)

DayDay, N.

1981-12-01

A summary description and documentation of the multigroup cross section libraries which exist at the IAEA Nuclear Data Section are given in this report. The libraries listed are available either on tape or in printed form. (author)

Utilization of cross-section covariance data in FBR core nuclear design and cross-section adjustment

International Nuclear Information System (INIS)

Ishikawa, Makoto

1994-01-01

In the core design of large fast breeder reactors (FBRs), it is essentially important to improve the prediction accuracy of nuclear characteristics from the viewpoint of both reducing cost and insuring reliability of the plant. The cross-section errors, that is, covariance data are one of the most dominant sources for the prediction uncertainty of the core parameters, therefore, quantitative evaluation of covariance data is indispensable for FBR core design. The first objective of the present paper is to introduce how the cross-section covariance data are utilized in the FBR core nuclear design works. The second is to delineate the cross-section adjustment study and its application to an FBR design, because this improved design method markedly enhances the needs and importance of the cross-section covariance data. (author)

Activation cross section data file, (1)

International Nuclear Information System (INIS)

Yamamuro, Nobuhiro; Iijima, Shungo.

1989-09-01

To evaluate the radioisotope productions due to the neutron irradiation in fission of fusion reactors, the data for the activation cross sections ought to be provided. It is planning to file more than 2000 activation cross sections at final. In the current year, the neutron cross sections for 14 elements from Ni to W have been calculated and evaluated in the energy range 10 -5 to 20 MeV. The calculations with a simplified-input nuclear cross section calculation system SINCROS were described, and another method of evaluation which is consistent with the JENDL-3 were also mentioned. The results of cross section calculation are in good agreement with experimental data and they were stored in the file 8, 9 and 10 of ENDF/B format. (author)

Is the quasielastic pion cross section really bigger than the pion-nucleus reaction cross section

International Nuclear Information System (INIS)

Silbar, R.R.

1979-01-01

It is shown that soft pion charge exchanges may increase the inclusive (π + ,π 0 ') cross section, relative to the total quasielastic (π + ,π + ') cross section, by as much as a factor of two. 4 references

Partial cross sections near the higher resonances

International Nuclear Information System (INIS)

Falk-Vairant, P.; Valladas, G.

1961-07-01

As a continuation of the report given at the 10. Rochester Conference, recent measurements of charge-exchange cross section and π 0 production in π - -p interactions are presented here. Section 1 gives a summary of the known results for the elastic, inelastic, and charge-exchange cross sections. Section 2 presents the behavior of the cross sections in the T=1/2 state, in order to discuss the resonances at 600 and 890 MeV. Section 3 discusses the charge-exchange scattering and the interference term between the T=1/2 and T=3/2 states. Section 4 presents some comments on inelastic processes. This report is reprinted from 'Reviews of Modern Physics', Vol. 33, No. 3, 362-367, July, 1961

Parametric Study of Fire Performance of Concrete Filled Hollow Steel Section Columns with Circular and Square Cross-Section

Science.gov (United States)

Nurfaidhi Rizalman, Ahmad; Tahir, Ng Seong Yap Mahmood Md; Mohammad, Shahrin

2018-03-01

Concrete filled hollow steel section column have been widely accepted by structural engineers and designers for high rise construction due to the benefits of combining steel and concrete. The advantages of concrete filled hollow steel section column include higher strength, ductility, energy absorption capacity, and good structural fire resistance. In this paper, comparison on the fire performance between circular and square concrete filled hollow steel section column is established. A three-dimensional finite element package, ABAQUS, was used to develop the numerical model to study the temperature development, critical temperature, and fire resistance time of the selected composite columns. Based on the analysis and comparison of typical parameters, the effect of equal cross-sectional size for both steel and concrete, concrete types, and thickness of external protection on temperature distribution and structural fire behaviour of the columns are discussed. The result showed that concrete filled hollow steel section column with circular cross-section generally has higher fire resistance than the square section.

New species in Aspergillus section Terrei

DEFF Research Database (Denmark)

Samson, R. A.; Peterson, S. W.; Frisvad, Jens Christian

2011-01-01

. clade including the type isolate of A. niveus (CBS 115.27) constitutes a lineage closely related to A. carneus. Fennellia nivea, the hypothesized teleomorph is not related to this clade. Aspergillus allahabadii, A. niveus var. indicus, and two species originally placed in section Versicolores, A......Section Terrei of Aspergillus was studied using a polyphasic approach including sequence analysis of parts of the beta-tubulin and calmodulin genes and the ITS region, macro- and micromorphological analyses and examination of extrolite profiles to describe three new species in this section. Based....... floccosus, A. terreus var. africanus, A. terreus var. aureus, while Aspergillus hortai is recognised at species level. Aspergillus terreus NRRL 4017 is described as the new species A. pseudoterreus. Also included in section Terrei are some species formerly placed in sections Flavipedes and Versicolores. A...

Particle sizes from sectional data

DEFF Research Database (Denmark)

Pawlas, Zbynek; Nyengaard, Jens Randel; Jensen, Eva Bjørn Vedel

2009-01-01

We propose a new statistical method for obtaining information about particle size distributions from sectional data without specific assumptions about particle shape. The method utilizes recent advances in local stereology. We show how to estimate separately from sectional data the variance due t...

Doppler broadening of cross sections

International Nuclear Information System (INIS)

Buckler, P.A.C.; Pull, I.C.

1962-12-01

Expressions for temperature dependent cross-sections in terms of resonance parameters are obtained, involving generalisations of the conventional Doppler functions, ψ and φ. Descriptions of Fortran sub-routines, which calculate broadened cross-sections in accordance with the derived formulae, are included. (author)

Research on the Cross Section Precision of High-strength Steel Tube with Rectangular Section in Rotary Draw Bending

Science.gov (United States)

Yang, Hongliang; Zhao, Hao; Xing, Zhongwen

2017-11-01

For the demand of energy conservation and security improvement, high-strength steel (HSS) is increasingly being used to produce safety related automotive components. However, cross-section distortion occurs easily in bending of HSS tube with rectangular section (RS), affecting the forming precision. HSS BR1500HS tube by rotary draw bending is taken as the study object and a description method of cross-section distortion is proposed in this paper. The influence on cross-section precision of geometric parameters including cross-section position, thickness of tube, bend radius etc. are studied by experiment. Besides, simulation of the rotary draw bending of HSS tube with rectangular section by ABAQUS are carried out and compared to the experiment. The results by simulation agree well with the experiment and show that the cross-section is approximately trapezoidal after distortion; the maximum of distortion exists at 45 ∼ 60° of the bending direction; and the absolute and relative distortion values increase with the decreasing of tube thickness or bending radius. Therefore, the results can provide a reference for the design of geometric parameters of HSS tube with rectangular section in rotary draw bending.

38 CFR 10.50 - Section 601 and section 603 payments made on first day of calendar quarter.

Science.gov (United States)

2010-07-01

... section 603 payments made on first day of calendar quarter. Cash payments and the first installment of installment payments authorized in sections 601 and 603, respectively of title VI of the World War Adjusted... 603 payments made on first day of calendar quarter. 10.50 Section 10.50 Pensions, Bonuses, and...

49 CFR 236.52 - Relayed cut-section.

Science.gov (United States)

2010-10-01

..., MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Rules and Instructions: All Systems Track Circuits § 236.52 Relayed cut-section. Where relayed cut-section is used in... 49 Transportation 4 2010-10-01 2010-10-01 false Relayed cut-section. 236.52 Section 236.52...

JENDL gas-production cross section file

International Nuclear Information System (INIS)

Nakagawa, Tsuneo; Narita, Tsutomu

1992-05-01

The JENDL gas-production cross section file was compiled by taking cross-section data from JENDL-3 and by using the ENDF-5 format. The data were given to 23 nuclei or elements in light nuclei and structural materials. Graphs of the cross sections and brief description on their evaluation methods are given in this report. (author)

Vivitron dead section pumping tests

International Nuclear Information System (INIS)

Heugel, J.; Bayet, J.P.; Brandt, C.; Delhomme, C.; Krieg, C.; Kustner, F.; Meiss, R.; Riehl, R.; Roth, C.; Schlewer, B.; Six, P.; Weber, A.

1990-10-01

Pumping tests have been conducted on a simulated accelerator dead section. The behavior of different pump types are compared and analyzed. Vacuum conditions to be expected in the Vivitron are reached and several parameters are verified. Selection of a pump for the Vivitron dead section is confirmed

75 FR 34421 - Notice of Funds Availability for Section 514 Farm Labor Housing Loans and Section 516 Farm Labor...

Science.gov (United States)

2010-06-17

... DEPARTMENT OF AGRICULTURE Rural Housing Service Notice of Funds Availability for Section 514 Farm Labor Housing Loans and Section 516 Farm Labor Housing Grants for Off-Farm Housing for Fiscal Year (FY... the timeframe to submit pre-applications for section 514 Farm Labor Housing (FLH) loans and section...

Low Energy Neutrino Cross Sections

International Nuclear Information System (INIS)

Zeller, G.P.

2004-01-01

Present atmospheric and accelerator based neutrino oscillation experiments operate at low neutrino energies (Ev ∼ 1 GeV) to access the relevant regions of oscillation parameter space. As such, they require precise knowledge of the cross sections for neutrino-nucleon interactions in the sub-to-few GeV range. At these energies, neutrinos predominantly interact via quasi-elastic (QE) or single pion production processes, which historically have not been as well studied as the deep inelastic scattering reactions that dominate at higher energies.Data on low energy neutrino cross sections come mainly from bubble chamber, spark chamber, and emulsion experiments that collected their data decades ago. Despite relatively poor statistics and large neutrino flux uncertainties, these measurements provide an important and necessary constraint on Monte Carlo models in present use. The following sections discuss the current status of QE, resonant single pion, coherent pion, and single kaon production cross section measurements at low energy

H. W. Laboratory manual: 100 Area section

Energy Technology Data Exchange (ETDEWEB)

1950-07-01

The purpose of this manual is to present a Hazard Breakdown of all jobs normally encountered in the laboratory work of the three sections comprising the Analytic Section, Metallurgy and Control Division of the Technical Department. A Hazard Breakdown is a careful analysis of any job in which the source of possible dangers is clearly indicated for each particular step. The analysis is prepared by individuals who are thoroughly familiar with the specific job or procedure. It is felt that if the hazards herein outlined are recognized by the Laboratory personnel and the suggested safety cautions followed, the chance for injury will be minimized and the worker will become generally more safety conscious. The manual, which is prefaced by the general safety rules applying to all the laboratories, is divided into three main sections, one for each of the three sections into which the Laboratories Division is divided. These sections are as follows: Section 1 -- 200 Area Control; Section 2 -- 100 Area Control; Section 3 -- 300 Area Control, Essential Materials, and Methods Improvement.

Reactor-vessel-sectioning demonstration

International Nuclear Information System (INIS)

Lundgren, R.A.

1981-09-01

A technical demonstration was successfully completed of simulated reactor vessel sectioning using the combined techniques of air arc gouging and flame cutting. A 4-ft x 3-ft x 9-in. thick sample was fabricated of A36 carbon steel to simulate a reactor vessel wall. A 1/4-in. layer of stainless steel (SS) was tungsten inert gas (TIG)-welded to the carbon steel. Several techniques were considered to section the simulated reactor vessel; air arc gouging was selected to penetrate the stainless steel, and flame cutting was selected to sever the carbon steel. Three sectioning operations were demonstrated. For all three, the operating parameters were the same; but the position of the sample was varied. For the first cut, the sample was placed in a horizontal position, and it was successfully severed from the SS side. For the second cut, the sample was turned over and cut from the carbon steel side. Cutting from the carbon steel side has the advantages of cost reduction

Cutting work in thick section cryomicrotomy.

Science.gov (United States)

Saubermann, A J; Riley, W D; Beeuwkes, R

1977-09-01

The forces during cryosectioning were measured using miniature strain gauges attached to a load cell fitted to the drive arm of the Porter-Blum MT-2 cryomicrotome. Work was calculated and the data normalized to a standard (1 mm X 1 mm X 0.5 micrometer) section. Thermal energy generated was also calculated. Five parameters were studied: cutting angle, thickness, temperature, hardness, and block shape. Force patterns could be divided into three major groups thought to represent cutting (Type I), large fracture planes greater than 10 micrometer in length (Type II), and small fracture planes less than 10 micrometer in length (Type III). Type I and Type II produced satisfactory sections. Work in cutting ranged from an average of 78.4 muJ to 568.8 muJ. Cutting angle and temperature had the greatest effect on sectioning. Heat generated would be sufficient to cause through-section melting for 0.5 micrometer thick sections assuming the worst possible case, namely that all heat went into the section without loss. Presence of a Type II pattern (large fracture pattern) is thought to be presumptive evidence against thawing.

Flow Cytometry Section

Data.gov (United States)

Federal Laboratory Consortium — The primary goal of the Flow Cytometry Section is to provide the services of state-of-the-art multi-parameter cellular analysis and cell sorting for researchers and...

Total neutron cross section of lead

International Nuclear Information System (INIS)

Kanda, K.; Aizawa, O.

1976-01-01

The total thermal-neutron cross section of natural lead under various physical conditions was measured by the transmission method. It became clear that the total cross section at room temperature previously reported is lower than the present data. The total cross section at 400, 500, and 600 0 C, above the melting point of lead, 327 0 C, was also measured, and the changes in the cross section as a function of temperature were examined, especially near and below the melting point. The data obtained for the randomly oriented polycrystalline state at room temperature were in reasonable agreement with the theoretical values calculated by the THRUSH and UNCLE-TOM codes

Effect of evaporation section and condensation section length on thermal performance of flat plate heat pipe

International Nuclear Information System (INIS)

Wang Shuangfeng; Chen Jinjian; Hu Yanxin; Zhang Wei

2011-01-01

Flat plate heat pipes (FPHPs) are one of the available technologies to deal with the high density electronic cooling problem due to their high thermal conductivity, reliability, and low weight penalty. A series of experiments were performed to investigate the effect of evaporation and condensation length on thermal performance of flat plate heat pipes. In the experiments, the FPHP had heat transfer length of 255 mm and width of 25 mm, and pure water was used as the working fluid. The results show that comparing to vapor chamber, the FPHP could realize long-distance heat transfer; comparing to the traditional heat pipe, the FPHP has large area contact with heat sources; the thermal resistance decreased and the heat transfer limit increased with the increase of evaporation section length; the FPHP would dry out at a lower heating power with the increase of condensation section length, which indicated that the heat transfer limit decreased, but the evaporator temperature also decreased; when the condensation section length approached to evaporation section length, the FPHP had a better thermal performance. - Highlights: → A strip sintered FPHP is proposed and tested. → The total heat transfer length reaches 255 mm → The efficiency of heat transport reaches 94.4%. → When the condensation section length approached to evaporation section length, the FPHP has better overall performance.

Light Imaging Section

Data.gov (United States)

Federal Laboratory Consortium — The mission of the Light Imaging Section is to give NIAMS scientists access to state-of-the-art light imaging equipment and to offer training and assistance at all...

Density-dependent expressions for photoionization cross-sections

International Nuclear Information System (INIS)

Sun Weiguo; Ma Xiaoguang; Cheng Yansong

2004-01-01

Alternative expressions for photoionization cross-sections and dielectric influence functions are suggested to study the photoionization cross-sections of atoms in solid system. The basic picture is that the photoionization cross-section of atoms in a real system can be described as the coupling between quantum quantity (QQ) and classical quantity (CQ) parts. The QQ part represents the photoionization cross-sections of an isolated particle, while the CQ part may represent most of the important influence of the macroscopic effects (e.g., the interactions of all surrounding polarized particles, and the dielectric property, etc.) on the photoionization cross-sections. The applications to the barium system show that the number-density-dependent new photoionization formula not only obtains the same cross-sections as those from the first order approximation for ideal gas, but also can generate the cross-sections for solid barium by transforming those of ideal gas of the same species using the dielectric influence function

Density-dependent expressions for photoionization cross-sections

Energy Technology Data Exchange (ETDEWEB)

Sun Weiguo; Ma Xiaoguang; Cheng Yansong

2004-06-07

Alternative expressions for photoionization cross-sections and dielectric influence functions are suggested to study the photoionization cross-sections of atoms in solid system. The basic picture is that the photoionization cross-section of atoms in a real system can be described as the coupling between quantum quantity (QQ) and classical quantity (CQ) parts. The QQ part represents the photoionization cross-sections of an isolated particle, while the CQ part may represent most of the important influence of the macroscopic effects (e.g., the interactions of all surrounding polarized particles, and the dielectric property, etc.) on the photoionization cross-sections. The applications to the barium system show that the number-density-dependent new photoionization formula not only obtains the same cross-sections as those from the first order approximation for ideal gas, but also can generate the cross-sections for solid barium by transforming those of ideal gas of the same species using the dielectric influence function.

Neutron accelerator tube having improved ionization section

International Nuclear Information System (INIS)

Givens, W.W.

1982-01-01

A neutron accelerator tube is described having a target section, an ionization section, and a replenisher section for supplying accelerator gas to the ionization section. The ionization section is located between the target and the replenisher section and includes an ionization chamber adapted to receive accelerator gas from the replenisher section. The ionization section further includes spaced cathodes having opposed active surfaces exposed to the interior of the ionization chamber. An anode is located intermediate the cathodes whereby in response to an applied positive voltage, electrons created by field emission are transmitted between the opposed active surfaces of the cathodes and produce the emission of secondary electrons. The active surface of at least one of the cathodes is formulated of a material having a secondary electron emission factor of at least one cathode member located in the tube adjacent to th replenisher section may have a protuberant portion extending axially into the ionization chamber. The other cathode spaced from the first cathode member in the direction of the target has an aperture therein along the axis of the protuberant portion. An annular magnet extends around the exterior of the ionization chamber and envelops the anode member. Means are provided to establish a high permeability magnetic flux path extending outwardly from the opposed poles from the magnet to the active surfaces of the cathode members

Neutron accelerator tube having improved ionization section

International Nuclear Information System (INIS)

Givens, W.W.

1981-01-01

A neutron accelerator tube having a target section, an ionization section, and a replenisher section for supplying accelerator gas to the ionization section. The ionization section is located between the target and the replenisher section and includes an ionization chamber adapted to receive accelerator gas from the replenisher section. The ionization section further includes spaced cathodes having opposed active surfaces exposed to the interior of the ionization chamber. An anode is located intermediate the cathodes whereby in response to an applied positive voltage, electrons created by field emmission are transmitted between the opposed active surfaces of the cathodes and produce the emission of secondary electrons. The active surface of at least one of the cathodes is formulated of a material having a secondary electron emission factor of at least 2. One cathode member located in the tube adjacent to the replenisher section may have a protuberant portion extending axially into the ioization chamber. The other cathode spaced from the first cathode member in the direction of the target has an aperture therein along the axis of the protuberant portion. An annular magnet extends around the exterior of the ionization chamber and envelops the anode member. Means are provided to establish a high permeability magnetic flux path extending outwardly from the opposed poles from the magnet to the active surfaces of the cathode members

Top quark production cross-section measurements

CERN Document Server

Chen, Ye; The ATLAS collaboration

2017-01-01

Measurements of the inclusive and differential cross-sections for top-quark pair and single top production cross sections in proton-proton collisions with the ATLAS detector at the Large Hadron Collider are presented at center-of-mass energies of 8 TeV and 13 TeV. The inclusive measurements reach high precision and are compared to the best available theoretical calculations. These measurements, including results using boosted tops, probe our understanding of top-pair production in the TeV regime. The results are compared to Monte Carlo generators implementing LO and NLO matrix elements matched with parton showers and NLO QCD calculations. For the t-channel single top measurement, the single top-quark and anti-top-quark total production cross-sections, their ratio, as well as differential cross sections are also presented. A measurement of the production cross-section of a single top quark in association with a W boson, the second largest single-top production mode, is also presented. Finally, measurements of ...

PREFACE: Focus section on superconducting power systems Focus section on superconducting power systems

Science.gov (United States)

Cardwell, D. A.; Amemiya, N.; Fair, R.

2012-01-01

This focus section of Superconductor Science and Technology looks at the properties, technology and applications of (RE)BCO and MgB2 based superconductors for power engineering systems. Both bulk and conductor forms of material are addressed, including elements of materials fabrication and processing, and the measurement of their applied properties for various levels of system application. The areas of research include ac losses in type II materials in power devices, cables and coated conductors, the development of high current dc cables and the application of superconductors in levitation devices, motors and fault current limiters. This focus section presents a broad cross-section of contemporary issues, that represent state-of-the-art for power applications of superconductors, and highlights the areas that require further development if commercial applications of these rapidly emerging materials are to be realised. It contains papers from some of the major groups in the field, including contributions from Europe, the USA and Japan, and describes devices that are relatively close to market.

(n,{alpha}) cross section measurement of gaseous sample using gridded ionization chamber. Cross section determination

Energy Technology Data Exchange (ETDEWEB)

Sanami, Toshiya; Baba, Mamoru; Saito, Keiichiro; Ibara, Yasutaka; Hirakawa, Naohiro [Tohoku Univ., Sendai (Japan). Faculty of Engineering

1997-03-01

We are developing a method of (n,{alpha}) cross section measurement using gaseous samples in a gridded ionization chamber (GIC). This method enables cross section measurements in large solid angle without the distortion by the energy loss in a sample, but requires a method to estimate the detection efficiency. We solve this problem by using GIC signals and a tight neutron collimation. The validity of this method was confirmed through the {sup 12}C(n,{alpha}{sub 0}){sup 9}Be measurement. We applied this method to the {sup 16}O(n,{alpha}){sup 13}C cross section around 14.1 MeV. (author)

STEM mode in the SEM for the analysis of cellular sections prepared by ultramicrotome sectioning

International Nuclear Information System (INIS)

Hondow, N; Harrington, J; Brydson, R; Brown, A

2012-01-01

The use of the dual imaging capabilities of a scanning electron microscope fitted with a transmitted electron detector is highlighted in the analysis of samples with importance in the field of nanotoxicology. Cellular uptake of nanomaterials is often examined by transmission electron microscopy of thin sections prepared by ultramicrotome sectioning. Examination by SEM allows for the detection of artefacts caused by sample preparation (eg. nanomaterial pull-out) and the complementary STEM mode permits study of the interaction between nanomaterials and cells. Thin sections of two nanomaterials of importance in nanotoxicology (cadmium selenide quantum dots and single walled carbon nanotubes) are examined using STEM mode in the SEM.

Three-section expiratory CT

DEFF Research Database (Denmark)

Loeve, Martine; de Bruijne, Marleen; Hartmann, Ieneke C. J.

2012-01-01

. Longitudinal follow-up was performed with three sections. All images were deidentified and randomized, and TA was scored with the Brody II system and a new quantitative system. Statistical analysis included the Wilcoxon signed rank test, calculation of Spearman and intraclass correlation coefficients, and use......Purpose: To estimate the effect of the number of computed tomography (CT) sections on trapped air (TA) assessment in patients with cystic fibrosis (CF) by using an established scoring system and a new quantitative scoring system and to compare CT and pulmonary function test (PFT) estimates of TA...

XCOM: Photon Cross Sections Database

Science.gov (United States)

SRD 8 XCOM: Photon Cross Sections Database (Web, free access)   A web database is provided which can be used to calculate photon cross sections for scattering, photoelectric absorption and pair production, as well as total attenuation coefficients, for any element, compound or mixture (Z <= 100) at energies from 1 keV to 100 GeV.

14 CFR Section 2 - General Accounting Policies

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false General Accounting Policies Section 2 Section 2 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION... General Accounting Provisions Section 2 General Accounting Policies ...

Section of LHC beampipe

CERN Multimedia

2009-01-01

A short section of the LHC beampipe including beam screen. Particle beams circulate for around 10 hours in the Large Hadron Collider (LHC). During this time, the particles make four hundred million revolutions of the machine, travelling a distance equivalent to the diameter of the solar system. The beams must travel in a pipe which is emptied of air, to avoid collisions between the particles and air molecules (which are considerably bigger than protons). The beam pipes are pumped down to an air pressure similar to that on the surface of the moon. Emptying the air from the two 27 km long Large Hadron Collider beam-pipes is equivalent in volume to emptying the nave of the Notre Dame cathedral in Paris. Initially, the air pressure is reduced by pumping. Then, cold sections of the beam-pipe are further emptied using the temperature gradient across special beam-screens inside the tube where particles travel. The warm sections are emptied using a coating called a getter that works like molecular fly-paper. This va...

Measurements of neutron capture cross sections

International Nuclear Information System (INIS)

Nakajima, Yutaka

1984-01-01

A review of measurement techniques for the neutron capture cross sections is presented. Sell transmission method, activation method, and prompt gamma-ray detection method are described using examples of capture cross section measurements. The capture cross section of 238 U measured by three different prompt gamma-ray detection methods (large liquid scintillator, Moxon-Rae detector, and pulse height weighting method) are compared and their discrepancies are resolved. A method how to derive the covariance is described. (author)

Section Level Public Land Survey - polygons

Data.gov (United States)

Minnesota Department of Natural Resources — Public Land Survey line delineations to the section level. Data are derived primarily from Section corner locations captured from paper USGS seven and one-half...

Section Level Public Land Survey - lines

Data.gov (United States)

Minnesota Department of Natural Resources — Public Land Survey line delineations to the section level. Developed from manually digitized section corners captured from paper USGS seven and one-half map sources.

Differences between LASL- and ANL-processed cross sections

International Nuclear Information System (INIS)

Kidman, R.B.; MacFarlane, R.E.; Becker, M.

1978-03-01

As part of the Los Alamos Scientific Laboratory (LASL) cross-section processing development, LASL cross sections and results from MINX/1DX system are compared to the Argonne National Laboratory cross sections and results from the ETOE-2/MC 2 -2 system for a simple reactor problem. Exact perturbation theory is used to establish the eigenvalue effect of every isotope group cross-section difference. Cross sections, cross-section differences, and their eigenvalue effects are clearly and conveniently displayed and compared on a group-by-group basis

Special Section on Coloured Petri Nets

DEFF Research Database (Denmark)

1998-01-01

Special section on coloured Petri nets, their basic concepts, analysis methods, tool support and industrial applications.......Special section on coloured Petri nets, their basic concepts, analysis methods, tool support and industrial applications....

NNLO jet cross sections by subtraction

International Nuclear Information System (INIS)

Somogyi, G.; Bolzoni, P.; Trocsanyi, Z.

2010-06-01

We report on the computation of a class of integrals that appear when integrating the so-called iterated singly-unresolved approximate cross section of an earlier NNLO subtraction scheme over the factorised phase space of unresolved partons. The integrated approximate cross section itself can be written as the product of an insertion operator (in colour space) times the Born cross section. We give selected results for the insertion operator for processes with two and three hard partons in the final state. (orig.)

NNLO jet cross sections by subtraction

Energy Technology Data Exchange (ETDEWEB)

Somogyi, G.; Bolzoni, P. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Trocsanyi, Z. [CERN, Geneva (Switzerland)

2010-06-15

We report on the computation of a class of integrals that appear when integrating the so-called iterated singly-unresolved approximate cross section of an earlier NNLO subtraction scheme over the factorised phase space of unresolved partons. The integrated approximate cross section itself can be written as the product of an insertion operator (in colour space) times the Born cross section. We give selected results for the insertion operator for processes with two and three hard partons in the final state. (orig.)

NNLO jet cross sections by subtraction

CERN Document Server

Somogyi, Gabor; Trocsanyi, Zoltan

2010-01-01

We report on the computation of a class of integrals that appear when integrating the so-called iterated singly-unresolved approximate cross section of the NNLO subtraction scheme of [1-4], over the factorised phase space of unresolved partons. The integrated approximate cross section itself can be written as the product of an insertion operator (in colour space) times the Born cross section. We give selected results for the insertion operator for processes with two and three hard partons in the final state.

Capture cross sections on unstable nuclei

Science.gov (United States)

Tonchev, A. P.; Escher, J. E.; Scielzo, N.; Bedrossian, P.; Ilieva, R. S.; Humby, P.; Cooper, N.; Goddard, P. M.; Werner, V.; Tornow, W.; Rusev, G.; Kelley, J. H.; Pietralla, N.; Scheck, M.; Savran, D.; Löher, B.; Yates, S. W.; Crider, B. P.; Peters, E. E.; Tsoneva, N.; Goriely, S.

2017-09-01

Accurate neutron-capture cross sections on unstable nuclei near the line of beta stability are crucial for understanding the s-process nucleosynthesis. However, neutron-capture cross sections for short-lived radionuclides are difficult to measure due to the fact that the measurements require both highly radioactive samples and intense neutron sources. Essential ingredients for describing the γ decays following neutron capture are the γ-ray strength function and level densities. We will compare different indirect approaches for obtaining the most relevant observables that can constrain Hauser-Feshbach statistical-model calculations of capture cross sections. Specifically, we will consider photon scattering using monoenergetic and 100% linearly polarized photon beams. Challenges that exist on the path to obtaining neutron-capture cross sections for reactions on isotopes near and far from stability will be discussed.

Status of neutron dosimetry cross sections

International Nuclear Information System (INIS)

Griffin, P.J.; Kelly, J.G.

1992-01-01

Several new cross section libraries, such as ENDF/B-VI(release 2), IRDF-90,JEF-2.2, and JENDL-3 Dosimetry, have recently been made available to the dosimetry community. the Sandia National Laboratories (SNL) Radiation Metrology Laboratory (RML) has worked with these libraries since pre-release versions were available. this paper summarizes the results of the intercomparison and testing of dosimetry cross sections. As a result of this analysis, a compendium of the best dosimetry cross sections was assembled from the available libraries for use within the SNL RML. this library, referred to as the SNLRML Library, contains 66 general dosimetry sensors and 3 special dosimeters unique to the RML sensor inventory. The SNLRML cross sections have been put into a format compatible with commonly used spectrum determination codes

Capture cross sections on unstable nuclei

Directory of Open Access Journals (Sweden)

Tonchev A.P.

2017-01-01

Full Text Available Accurate neutron-capture cross sections on unstable nuclei near the line of beta stability are crucial for understanding the s-process nucleosynthesis. However, neutron-capture cross sections for short-lived radionuclides are difficult to measure due to the fact that the measurements require both highly radioactive samples and intense neutron sources. Essential ingredients for describing the γ decays following neutron capture are the γ-ray strength function and level densities. We will compare different indirect approaches for obtaining the most relevant observables that can constrain Hauser-Feshbach statistical-model calculations of capture cross sections. Specifically, we will consider photon scattering using monoenergetic and 100% linearly polarized photon beams. Challenges that exist on the path to obtaining neutron-capture cross sections for reactions on isotopes near and far from stability will be discussed.

Graphs of the cross sections in the recommended Monte Carlo cross-section library at the Los Alamos Scientific Laboratory

International Nuclear Information System (INIS)

Soran, P.D.; Seamon, R.E.

1980-05-01

Graphs of all neutron cross sections and photon production cross sections on the Recommended Monte Carlo Cross Section (RMCCS) library have been plotted along with local neutron heating numbers. Values for anti ν, the average number of neutrons per fission, are also given

Scattering cross section for various potential systems

Directory of Open Access Journals (Sweden)

Myagmarjav Odsuren

2017-08-01

Full Text Available We discuss the problems of scattering in this framework, and show that the applied method is very useful in the investigation of the effect of the resonance in the observed scattering cross sections. In this study, not only the scattering cross sections but also the decomposition of the scattering cross sections was computed for the α–α system. To obtain the decomposition of scattering cross sections into resonance and residual continuum terms, the complex scaled orthogonality condition model and the extended completeness relation are used. Applying the present method to the α–α and α–n systems, we obtained good reproduction of the observed phase shifts and cross sections. The decomposition into resonance and continuum terms makes clear that resonance contributions are dominant but continuum terms and their interference are not negligible. To understand the behavior of observed phase shifts and the shape of the cross sections, both resonance and continuum terms are calculated.

Scattering cross section for various potential systems

Energy Technology Data Exchange (ETDEWEB)

Odsuren, Myagmarjav; Khuukhenkhuu, Gonchigdorj; Davaa, Suren [Nuclear Research Center, School of Engineering and Applied Sciences, National University of Mongolia, Ulaanbaatar (Mongolia); Kato, Kiyoshi [Nuclear Reaction Data Centre, Faculty of Science, Hokkaido University, Sapporo (Japan)

2017-08-15

We discuss the problems of scattering in this framework, and show that the applied method is very useful in the investigation of the effect of the resonance in the observed scattering cross sections. In this study, not only the scattering cross sections but also the decomposition of the scattering cross sections was computed for the α–α system. To obtain the decomposition of scattering cross sections into resonance and residual continuum terms, the complex scaled orthogonality condition model and the extended completeness relation are used. Applying the present method to the α–α and α–n systems, we obtained good reproduction of the observed phase shifts and cross sections. The decomposition into resonance and continuum terms makes clear that resonance contributions are dominant but continuum terms and their interference are not negligible. To understand the behavior of observed phase shifts and the shape of the cross sections, both resonance and continuum terms are calculated.

Relating DSM-5 section III personality traits to section II personality disorder diagnoses.

Science.gov (United States)

Morey, L C; Benson, K T; Skodol, A E

2016-02-01

The DSM-5 Personality and Personality Disorders Work Group formulated a hybrid dimensional/categorical model that represented personality disorders as combinations of core impairments in personality functioning with specific configurations of problematic personality traits. Specific clusters of traits were selected to serve as indicators for six DSM categorical diagnoses to be retained in this system - antisocial, avoidant, borderline, narcissistic, obsessive-compulsive and schizotypal personality disorders. The goal of the current study was to describe the empirical relationships between the DSM-5 section III pathological traits and DSM-IV/DSM-5 section II personality disorder diagnoses. Data were obtained from a sample of 337 clinicians, each of whom rated one of his or her patients on all aspects of the DSM-IV and DSM-5 proposed alternative model. Regression models were constructed to examine trait-disorder relationships, and the incremental validity of core personality dysfunctions (i.e. criterion A features for each disorder) was examined in combination with the specified trait clusters. Findings suggested that the trait assignments specified by the Work Group tended to be substantially associated with corresponding DSM-IV concepts, and the criterion A features provided additional diagnostic information in all but one instance. Although the DSM-5 section III alternative model provided a substantially different taxonomic structure for personality disorders, the associations between this new approach and the traditional personality disorder concepts in DSM-5 section II make it possible to render traditional personality disorder concepts using alternative model traits in combination with core impairments in personality functioning.

Photoionization cross section of atomic and molecular oxygen

International Nuclear Information System (INIS)

Pareek, P.N.

1983-01-01

Photoionization cross sections of atomic oxygen and dissociative photoionization cross sections of molecular oxygen were measured from their respective thresholds to 120 angstrom by use of a photoionization mass spectrometer in conjunction with a spark light source. The photoionization cross sections O 2 + parent ion and O + fragment ion from neutral O 2 were obtained by a technique that eliminated the serious problem of identifying the true abundances of O + ions. These ions are generally formed with considerable kinetic energy and, because most mass spectrometers discriminate against energetic ions, true O + abundances are difficult to obtain. In the present work the relative cross sections for producing O + ions are obtained and normalized against the total cross sections in a spectral region where dissociative ionization is not possible. The fragmentation cross sections for O + were then obtained by subtraction of O 2 + cross sections from the known total photoionization cross sections. The results are compared with the previously published measurements. The absolute photoionization cross section of atomic oxygen sigma 8 /sub +/ was measured at 304 A. The actual number density of oxygen atoms within the ionization region was obtained by measuring the fraction of 0 2 molecules dissociated. This sigma/sub +/ at 304 angstrom was used to convert the relative photoinization cross sections, measured as a function of wavelength using a calibrated photodiode, to absolute cross sections. The results are compared with previous measurements and calculated cross sections. angstrom Rydberg series converging to the OII 4 P state was observed

Introduction to "PIQ"'s Special Ethics Section.

Science.gov (United States)

Hatcher, Tim

2003-01-01

Introduces "Performance Improvement Quarterly's" special section on ethics. The focus of this special section is to explore ethics and the field of human performance improvement in a broad sense by encouraging an examination of ethical concepts and responsibilities in the profession. This special section includes three critical views of…

Graphs of the cross sections in the Alternate Monte Carlo Cross Section library at the Los Alamos Scientific Laboratory

International Nuclear Information System (INIS)

Seamon, R.E.; Soran, P.D.

1980-06-01

Graphs of all neutron cross sections and photon production cross sections on the Alternate Monte Carlo Cross Section (AMCCS) library have been plotted along with local neutron heating numbers. The values of ν-bar, the average number of neutrons per fission, are also plotted for appropriate isotopes

[Caesarean section in german hospitals: validity of hospital quality report data for monitoring C-section rates].

Science.gov (United States)

Junghänel, K; Renz-Polster, H; Jarczok, M N; Hornemann, A; Böhler, T; De Bock, F

2015-04-01

It is not known if "hospital quality reports" (HQR) document Caesarean (C-) section rates at the hospital level accurately enough for use as a reliable data source when it comes to explaining regional variations of C-sections in Germany by factors at the hospital level. We aimed to answer this question using HQR from hospitals in Baden-Württemberg as data source. Diagnostic and procedure codes from HQR for the year 2008 (HQRdata), were used to calculate numbers of births, numbers of C-sections, and rates of births by C-section (CSR) for 94 of 97 hospitals in Baden-Württemberg. These numbers were compared to internal hospital (IH) data delivered upon request by 80 of 97 hospitals and stemming from vital statistics, birth registry forms, or external quality assurance datasets. There was no difference in the number of births between HQR data and IH data, but the number of C-sections and the CSR differed significantly (pCSR calculated using HQR data was 4.9 ± 17.9% higher than CSR from IH data (absolute difference 1.5 ± 5.8%). The correlation between the 2 data sources was moderate (r=0.73). Only 55% of the variance in IH data-based CSR was explained by HQR data. The proportion between highest and lowest CSR in hospitals in Baden-Württemberg was 4.9 for HQR data and 3.6 for IH data. There are significant and relevant differences between C-section rates based on ei-ther HQR or IH data. This questions routine data from HQR for 2008 as a reliable data source for research work. © Georg Thieme Verlag KG Stuttgart · New York.

ACHP | Section 3

Science.gov (United States)

. EO 13287 includes a number of actions that are intended to encourage better accounting, use Section 7 of the EO, the applicable definition of "historic properties" is the one found in the NHPA. Under that definition a "historic property" is "any prehistoric or historic

Differential cross sections and cross-section ratios for the electron-impact excitation of the neon 2p53s configuration

International Nuclear Information System (INIS)

Khakoo, M. A.; Wrkich, J.; Larsen, M.; Kleiban, G.; Kanik, I.; Trajmar, S.; Brunger, M.J.; Teubner, P.J.O.; Crowe, A.; Fontes, C.J.; Clark, R.E.H.; Zeman, V.; Bartschat, K.; Madison, D.H.; Srivastava, R.; Stauffer, A.D.

2002-01-01

Electron-impact differential cross-section measurements for the excitation of the 2p 5 3s configuration of Ne are reported. The Ne cross sections are obtained using experimental differential cross sections for the electron-impact excitation of the n=2 levels of atomic hydrogen [Khakoo et al., Phys. Rev. A 61, 012701-1 (1999)], and existing experimental helium differential cross-section measurements, as calibration standards. These calibration measurements were made using the method of gas mixtures (Ne and H followed by Ne and He), in which the gas beam profiles of the mixed gases are found to be the same within our experimental errors. We also present results from calculations of these differential cross sections using the R-matrix and unitarized first-order many-body theory, the distorted-wave Born approximation, and relativistic distorted-wave methods. Comparison with available experimental differential cross sections and differential cross-section ratios is also presented

Neutron-capture Cross Sections from Indirect Measurements

Energy Technology Data Exchange (ETDEWEB)

Escher, J E; Burke, J T; Dietrich, F S; Ressler, J J; Scielzo, N D; Thompson, I J

2011-10-18

Cross sections for compound-nuclear reactions play an important role in models of astrophysical environments and simulations of the nuclear fuel cycle. Providing reliable cross section data remains a formidable task, and direct measurements have to be complemented by theoretical predictions and indirect methods. The surrogate nuclear reactions method provides an indirect approach for determining cross sections for reactions on unstable isotopes, which are difficult or impossible to measure otherwise. Current implementations of the method provide useful cross sections for (n,f) reactions, but need to be improved upon for applications to capture reactions.

Neutron Cross Sections for Aluminium

Energy Technology Data Exchange (ETDEWEB)

Forsberg, Leif

1963-08-15

Total, elastic, inelastic, (n, 2n), (n, {alpha}), (n, p), and (n, {gamma}) cross sections for aluminium have been compiled from thermal to 100 MeV based upon literature search and theoretical interpolations and estimates. Differential elastic cross sections in the centre of mass system are represented by the Legendre coefficients. This method was chosen in order to obtain the best description of the energy dependence of the anisotropy.

National Variation in Caesarean Section Rates: A Cross Sectional Study in Ireland.

LENUS (Irish Health Repository)

Sinnott, Sarah-Jo

2016-01-01

Internationally, caesarean section (CS) rates are rising. However, mean rates of CS across providers obscure extremes of CS provision. We aimed to quantify variation between all maternity units in Ireland.

46 CFR Section 1 - Books of account.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Books of account. Section 1 Section 1 Shipping MARITIME... TRANSACTIONS UNDER AGENCY AGREEMENTS Accounts Section 1 Books of account. A separate set of books of account... agreement. The books of original entry and ledgers may be similar in design to those heretofore employed by...

The Levy sections theorem revisited

International Nuclear Information System (INIS)

Figueiredo, Annibal; Gleria, Iram; Matsushita, Raul; Silva, Sergio Da

2007-01-01

This paper revisits the Levy sections theorem. We extend the scope of the theorem to time series and apply it to historical daily returns of selected dollar exchange rates. The elevated kurtosis usually observed in such series is then explained by their volatility patterns. And the duration of exchange rate pegs explains the extra elevated kurtosis in the exchange rates of emerging markets. In the end, our extension of the theorem provides an approach that is simpler than the more common explicit modelling of fat tails and dependence. Our main purpose is to build up a technique based on the sections that allows one to artificially remove the fat tails and dependence present in a data set. By analysing data through the lenses of the Levy sections theorem one can find common patterns in otherwise very different data sets

The Levy sections theorem revisited

Science.gov (United States)

Figueiredo, Annibal; Gleria, Iram; Matsushita, Raul; Da Silva, Sergio

2007-06-01

This paper revisits the Levy sections theorem. We extend the scope of the theorem to time series and apply it to historical daily returns of selected dollar exchange rates. The elevated kurtosis usually observed in such series is then explained by their volatility patterns. And the duration of exchange rate pegs explains the extra elevated kurtosis in the exchange rates of emerging markets. In the end, our extension of the theorem provides an approach that is simpler than the more common explicit modelling of fat tails and dependence. Our main purpose is to build up a technique based on the sections that allows one to artificially remove the fat tails and dependence present in a data set. By analysing data through the lenses of the Levy sections theorem one can find common patterns in otherwise very different data sets.

Instrument ampersand controls section (IA) improvements

International Nuclear Information System (INIS)

Kramer, C.; Paul, J.

1993-01-01

This portion of the panel session briefly delineates improvements in the Instrument and Controls (IA) Section over the past few years. These improvements are listed briefly in summary form. The status of publication of the IA Section of AG-1 is reviewed

Polyphasic taxonomy of Aspergillus section Cervini

DEFF Research Database (Denmark)

Chen, A.J.; Varga, J.; Frisvad, Jens Christian

2016-01-01

Species belonging to Aspergillus section Cervini are characterised by radiate or short columnar, fawn coloured, uniseriate conidial heads. The morphology of the taxa in this section is very similar and isolates assigned to these species are frequently misidentified. In this study, a polyphasic...

Parametric equations for calculation of macroscopic cross sections

International Nuclear Information System (INIS)

Botelho, Mario Hugo; Carvalho, Fernando

2015-01-01

Neutronic calculations of the core of a nuclear reactor is one thing necessary and important for the design and management of a nuclear reactor in order to prevent accidents and control the reactor efficiently as possible. To perform these calculations a library of nuclear data, including cross sections is required. Currently, to obtain a cross section computer codes are used, which require a large amount of processing time and computer memory. This paper proposes the calculation of macroscopic cross section through the development of parametric equations. The paper illustrates the proposal for the case of macroscopic cross sections of absorption (Σa), which was chosen due to its greater complexity among other cross sections. Parametric equations created enable, quick and dynamic way, the determination of absorption cross sections, enabling the use of them in calculations of reactors. The results show efficient when compared with the absorption cross sections obtained by the ALPHA 8.8.1 code. The differences between the cross sections are less than 2% for group 2 and less than 0.60% for group 1. (author)

Neutron-capture cross sections from indirect measurements

Directory of Open Access Journals (Sweden)

Scielzo N.D.

2012-02-01

Full Text Available Cross sections for compound-nuclear reactions reactions play an important role in models of astrophysical environments and simulations of the nuclear fuel cycle. Providing reliable cross section data remains a formidable task, and direct measurements have to be complemented by theoretical predictions and indirect methods. The surrogate nuclear reactions method provides an indirect approach for determining cross sections for reactions on unstable isotopes, which are difficult or impossible to measure otherwise. Current implementations of the method provide useful cross sections for (n,f reactions, but need to be improved upon for applications to capture reactions.

Curves and tables of neutron cross sections

International Nuclear Information System (INIS)

Nakagawa, Tsuneo; Asami, Tetsuo; Yoshida, Tadashi

1990-07-01

Neutron cross-section curves from the Japanese Evaluated Nuclear Data Library version 3, JENDL-3, are presented in both graphical and tabular form for users in a wide range of application areas in the nuclear energy field. The contents cover cross sections for all the main reactions induced by neutrons with an energy below 20 MeV including; total, elastic scattering, capture, and fission, (n,n'), (n,2n), (n,3n), (n,α), (n,p) reactions. The 2200 m/s cross-section values, resonance integrals, and Maxwellian- and fission-spectrum averaged cross sections are also tabulated. (author)

Group cross-section processing method and common nuclear group cross-section library based on JENDL-3 nuclear data file

International Nuclear Information System (INIS)

Hasegawa, Akira

1991-01-01

A common group cross-section library has been developed in JAERI. This system is called 'JSSTDL-295n-104γ (neutron:295 gamma:104) group constants library system', which is composed of a common 295n-104γ group cross-section library based on JENDL-3 nuclear data file and its utility codes. This system is applicable to fast and fusion reactors. In this paper, firstly outline of group cross-section processing adopted in Prof. GROUCH-G/B system is described in detail which is a common step for all group cross-section library generation. Next available group cross-section libraries developed in Japan based on JENDL-3 are briefly reviewed. Lastly newly developed JSSTDL library system is presented with some special attention to the JENDL-3 data. (author)

Operationsteknikker ved section

DEFF Research Database (Denmark)

Aabakke, Anna J M; Secher, Niels Jørgen; Krebs, Lone

2014-01-01

Caesarean section (CS) is a common surgical procedure, and in Denmark 21% of deliveries is by CS. There is an increasing amount of scientific evidence to support the different surgical techniques used at CS. This article reviews the literature regarding CS techniques. There is still a lack of evi...

Atlas of photoneutron cross sections obtained with monoenergetic photons

International Nuclear Information System (INIS)

Dietrich, S.S.; Berman, B.L.

1988-01-01

Photoneutron cross-section and integrated cross-section data obtained with monoenergetic photons are presented in a uniform format. All of the measured partial photoneutron cross sections, the total photoneutron cross section, and the photoneutron yield cross section are plotted as functions of the incident photon energy, as are the integrated photoneutron cross sections and their first and second moments. The values of the integrated cross sections and the moments of the integrated total cross section up to the highest photon energy for which they were measured are tabulated, as are the parameters of Lorentz curves fitted to the total photoneutron cross-section data for medium and heavy nuclei (A>50). This compilation is current as of June 1987. copyright 1988 Academic Press, Inc

Fluoroscopic tomography. [for body section synthesis

Science.gov (United States)

Baily, N. A.; Crepeau, R. L.; Lasser, E. C.

1974-01-01

A fluoroscopic tomography system capable of synthesizing body sections at a number of levels within the body has been developed. The synthesized body sections may lie either in a range of planes parallel to, tilted with respect to, skewed with respect to, or both tilted and skewed with respect to the plane of motion of the X-ray tube target. In addition, body sections can be presented which are contoured to the patient's anatomy. That is to say, they may even encompass such complex surfaces as a quadratic hyperplane. In addition, tomograms of organs in motion can be imaged.

High ET jet cross sections at CDF

International Nuclear Information System (INIS)

Flaugher, B.

1996-08-01

The inclusive jet cross section for p anti p collisions at √s = 1.8 TeV as measured by the CDF collaboration will be presented. Preliminary CDF measurements of the Σ E T cross section at √s = 1.8 TeV and the central inclusive jet cross section at √s = 0.630 TeV will also be shown

Technical advances in the sectioning of dental tissue and of on-section cross-linked collagen detection in mineralized teeth.

Science.gov (United States)

Singhrao, Sim K; Sloan, Alastair J; Smith, Emma L; Archer, Charles W

2010-08-01

Immunohistochemical detection of cross-linked fibrillar collagens in mineralized tissues is much desired for exploring the mechanisms of biomineralization in health and disease. Mineralized teeth are impossible to section when embedded in conventional media, thus limiting on-section characterization of matrix proteins by immunohistochemistry. We hypothesized that by using an especially formulated acrylic resin suitable for mineralized dental tissues, not only sectioning of teeth would be possible, but also our recently developed immunofluorescence labeling technique would be amenable to fully calcified tissues for characterization of dentinal fibrillar collagens, which remains elusive. The hypothesis was tested on fixed rodent teeth embedded in Technovit 9100 New. It was possible to cut thin (1 mum) sections of mineralized teeth, and immunofluorescence characterization of cross-linked type I fibrillar collagen was selected due to its abundance in dentine. Decalcified samples of teeth embedded in paraffin wax were also used to compare immunolabeling from either method using the same immunoreagents in equivalent concentrations. In the decalcified tissue sections, type I collagen labeling in the dentine along the tubules was "patchy" and the signal in the predentine was very weak. However, enhanced signal in mineralized samples with type I collagen was detected not only in the predentine but also at the limit between intertubular dentine, within the elements of the enamel organ and subgingival stroma. This report offers advances in sectioning mineralized dental tissues and allows the application of immunofluorescence not only for on-section protein detection but importantly for detecting cross-linked fibrous collagens in both soft and mineralized tissue sections.

Activation cross section and isomeric cross section ratios for the (n ,2 n ) reaction on 153Eu

Science.gov (United States)

Luo, Junhua; Jiang, Li; Li, Suyuan

2017-10-01

The 153Eu(n ,2 n ) m1,m2,g152Eu cross section was measured by means of the activation technique at three neutron energies in the range 13-15 MeV. The quasimonoenergetic neutron beam was formed via the 3H(d ,n ) 4He reaction, in the Pd-300 Neutron Generator at the Chinese Academy of Engineering Physics (CAEP). The activities induced in the reaction products were measured using high-resolution γ-ray spectroscopy. The cross section of the population of the second high-spin (8-) isomeric state was measured along with the reaction cross section populating both the ground (3-) and the first isomeric state (0-). Cross sections were also evaluated theoretically using the numerical code TALYS-1.8, with different level density options at neutron energies varying from the reaction threshold to 20 MeV. Results are discussed and compared with the corresponding literature.

Rectangular-section mirror light pipes

Energy Technology Data Exchange (ETDEWEB)

Swift, P.D.; Lawlor, R. [School of Physical Sciences, Dublin City University, Dublin 9 (Ireland); Smith, G.B.; Gentle, A. [Department of Applied Physics, University of Technology, Sydney, Broadway, NSW 2007 (Australia)

2008-08-15

Using an integrated-ray approach an expression for the transmission of rectangular section mirror light pipe (MLP) has been derived for the case of collimated light input. The transmittance and the irradiance distribution at the exit aperture of rectangular-section MLPs have been measured experimentally and calculated theoretically for the case of collimated light input. The results presented extend the description of MLPs from the cylindrical case. Measured and calculated transmittances and irradiance distributions are in good agreement. (author)

2010 ANNUAL MEETING ON NUCLEAR TECHNOLOGY. Pt. 4. Section reports

International Nuclear Information System (INIS)

Berlepsch, Thilo v.; Hering, Wolfgang

2011-01-01

Summary report on 2 Sessions of Section: - New Build and Innovations (Section 12) of the ANNUAL MEETING On NUCLEAR TECHNOLOGY held in Berlin on May 4 to 6, 2010. The other Sections 'Reactor Physics and Methods of Calculation (Section 1)', 'Thermodynamics and Fluid Dynamics (Section 2)', 'Safety of Nuclear Installations - Methods, Analysis, Results (Section 3)', 'Front End and Back End of the Fuel Cycle, Radioactive Waste, Storage (Section 4)', 'Front End of the Fuel Cycle, Fuel Elements and Core Components (Section 5)', 'Operation of Nuclear Installations (Section 6)', 'Decommissioning of Nuclear Installations (Section 7)', 'Fusion Technology (Section 8)', 'Energy Industry and Economics (Section 10)', 'Radiation Protection (Section 11)', 'New Build and Innovations (Session New Build and Innovations, Section 12)', and 'Education, Expert Knowledge, Know-how-Transfer (Section 13)' have been covered in atw issues 10, 11 and 12 (2010). (orig.)

The Golden Section.

Science.gov (United States)

Runion, Garth E.

The Golden Section, also known as the "Golden Mean" and the "Divine Proportion," is a ratio found in art and nature that has mathematical properties. This book explores these geometric and algebraic properties in a variety of activities. Construction problems, designs using the pentagon and pentagram, and opportunities to work…

Cross-Sectional Analysis of Longitudinal Mediation Processes.

Science.gov (United States)

O'Laughlin, Kristine D; Martin, Monica J; Ferrer, Emilio

2018-01-01

Statistical mediation analysis can help to identify and explain the mechanisms behind psychological processes. Examining a set of variables for mediation effects is a ubiquitous process in the social sciences literature; however, despite evidence suggesting that cross-sectional data can misrepresent the mediation of longitudinal processes, cross-sectional analyses continue to be used in this manner. Alternative longitudinal mediation models, including those rooted in a structural equation modeling framework (cross-lagged panel, latent growth curve, and latent difference score models) are currently available and may provide a better representation of mediation processes for longitudinal data. The purpose of this paper is twofold: first, we provide a comparison of cross-sectional and longitudinal mediation models; second, we advocate using models to evaluate mediation effects that capture the temporal sequence of the process under study. Two separate empirical examples are presented to illustrate differences in the conclusions drawn from cross-sectional and longitudinal mediation analyses. Findings from these examples yielded substantial differences in interpretations between the cross-sectional and longitudinal mediation models considered here. Based on these observations, researchers should use caution when attempting to use cross-sectional data in place of longitudinal data for mediation analyses.

Recommended evaluation procedure for photonuclear cross section

Energy Technology Data Exchange (ETDEWEB)

Lee, Young-Ouk; Chang, Jonghwa; Fukahori, Tokio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1998-03-01

In order to generate photonuclear cross section library for the necessary applications, data evaluation is combined with theoretical evaluation, since photonuclear cross sections measured cannot provide all necessary data. This report recommends a procedure consisting of four steps: (1) analysis of experimental data, (2) data evaluation, (3) theoretical evaluation and, if necessary, (4) modification of results. In the stage of analysis, data obtained by different measurements are reprocessed through the analysis of their discrepancies to a representative data set. In the data evaluation, photonuclear absorption cross sections are evaluated via giant dipole resonance and quasi-deutron mechanism. With photoabsorption cross sections from the data evaluation, theoretical evaluation is applied to determine various decay channel cross sections and emission spectra using equilibrium and preequilibrium mechanism. After this, the calculated results are compared with measured data, and in some cases the results are modified to better describe measurements. (author)

Recommended activation detector cross sections (RNDL-82)

International Nuclear Information System (INIS)

Bondars, Kh.Ya.; Lapenas, A.A.

1984-01-01

The results of the comparison between measured and calculated average cross sections in 5 benchmark experiments are presented. Calculations have been based on the data from 10 libraries of evaluated cross sections. The recommended library (RNDL-82) of the activation detector cross sections has been created on the basis of the comparison. RNDL-82, including 26 reactions, and the basic characteristics of the detectors are presented. (author)

Radiation Protection Section (SC/SL/RP)

CERN Document Server

2006-01-01

We should like to inform you that the Radiation Protection Section (SC/SL/RP) located on the Prévessin site has moved from Building 865 (ground floor) to new premises in Wing A of Building 892 (second floor). Telephone numbers remain the same. SC/SL/RP section

Accurate Cross Sections for Microanalysis

OpenAIRE

Rez, Peter

2002-01-01

To calculate the intensity of x-ray emission in electron beam microanalysis requires a knowledge of the energy distribution of the electrons in the solid, the energy variation of the ionization cross section of the relevant subshell, the fraction of ionizations events producing x rays of interest and the absorption coefficient of the x rays on the path to the detector. The theoretical predictions and experimental data available for ionization cross sections are limited mainly to K shells of a...

29 CFR Section 1607.16 - Definitions.

Science.gov (United States)

2010-07-01

.... Job analysis. A detailed statement of work behaviors and other information relevant to the job. L. Job description. A general statement of job duties and responsibilities. M. Knowledge. A body of information... of performance on the job. See section 5B and section 14C. E. Construct validity. Demonstrated by...

Activation cross section and isomeric cross-section ratio for the (n,2n) reaction on {sup 132,134}Ba

Energy Technology Data Exchange (ETDEWEB)

Luo, Junhua [Hexi Univ., Zhangye (China). School of Physics and Electromechanical Engineering; Hexi Univ., Zhangye (China). Inst. of New Energy; Wu, Chunlei; Jiang, Li [Chinese Academy of Engineering Physics, Mianyang (China). Inst. of Nuclear Physics and Chemistry; Li, Suyuan [Hexi Univ., Zhangye (China). Inst. of New Energy

2017-07-01

Cross sections of the {sup 132}Ba(n,2n){sup 131m,g}Ba and {sup 134}Ba(n,2n){sup 133m,g}Ba reactions and their isomeric cross section ratios σ{sub m}/σ{sub g} have been measured by means of the activation technique at three neutron energies in the range 13-15 MeV. BaCO{sub 3} samples and Nb monitor foils were activated together to determine the reaction cross section and the incident neutron flux. The quasimonoenergetic neutrons beam were produced via the {sup 3}H(d,n){sup 4}He reaction at the Pd-300 Neutron Generator of the Chinese Academy of Engineering Physics (CAEP). The activities induced in the reaction products were measured using high-resolution γ ray spectroscopy. The pure cross section of the ground-state was derived from the absolute cross section of the metastable state and the residual nuclear decay analysis. Cross sections were also evaluated theoretically using the numerical nuclear model code, TALYS-1.8 with different level density options at neutron energies varying from the reaction threshold to 20 MeV. Results are discussed and compared with the corresponding literature.

Comparative analysis among several cross section sets

International Nuclear Information System (INIS)

Caldeira, A.D.

1983-01-01

Critical parameters were calculated using the one dimensional multigroup transport theory for several cross section sets. Calculations have been performed for water mixtures of uranium metal, plutonium metal and uranium-thorium oxide, and for metallics systems, to determine the critical dimensions of geometries (sphere and cylinder). For this aim, the following cross section sets were employed: 1) multigroup cross section sets obtained from the GAMTEC-II code; 2) the HANSEN-ROACH cross section sets; 3) cross section sets from the ENDF/B-IV, processed by the NJOY code. Finally, we have also calculated the corresponding critical radius using the one dimensional multigroup transport DTF-IV code. The numerical results agree within a few percent with the critical values obtained in the literature (where the greatest discrepancy occured in the critical dimensions of water mixtures calculated with the values generated by the NJOY code), a very good results in comparison with similar works. (Author) [pt

Fission cross section measurements at intermediate energies

International Nuclear Information System (INIS)

Laptev, Alexander

2005-01-01

The activity in intermediate energy particle induced fission cross-section measurements of Pu, U isotopes, minor actinides and sub-actinides in PNPI of Russia is reviewed. The neutron-induced fission cross-section measurements are under way in the wide energy range of incident neutrons from 0.5 MeV to 200 MeV at the GNEIS facility. In number of experiments at the GNEIS facility, the neutron-induced fission cross sections were obtained for many nuclei. In another group of experiments the proton-induced fission cross-section have been measured for proton energies ranging from 200 to 1000 MeV at 100 MeV intervals using the proton beam of PNPI synchrocyclotron. (author)

Convex bodies with many elliptic sections

OpenAIRE

Arelio, Isaac; Montejano, Luis

2014-01-01

{We show in this paper that two normal elliptic sections through every point of the boundary of a smooth convex body essentially characterize an ellipsoid and furthermore, that four different pairwise non-tangent elliptic sections through every point of the $C^2$-differentiable boundary of a convex body also essentially characterize an ellipsoid.

Dielectronic recombination cross sections for H-like ions

International Nuclear Information System (INIS)

Pindzola, M.S.; Badnell, N.R.; Griffin, D.C.

1990-01-01

Dielectronic recombination cross sections for several H-like atomic ions are calculated in an isolated-resonance, distorted-wave approximation. Fine-structure and configuration-interaction effects are examined in detail for the O 7+ cross section. Hartree-Fock, intermediate-coupled, multiconfiguration dielectronic recombination cross sections for O 7+ are then compared with the recent experimental measurements obtained with the Test Storage Ring in Heidelberg. The cross-section spectra line up well in energy and the shape of the main resonance structures are comparable. The experimental integrated cross sections differ by up to 20% from theory, but this may be due in part to uncertainties in the electron distribution function

Spanwise transition section for blended wing-body aircraft

Science.gov (United States)

Hawley, Arthur V. (Inventor)

1999-01-01

A blended wing-body aircraft includes a central body, a wing, and a transition section which interconnects the body and the wing on each side of the aircraft. The two transition sections are identical, and each has a variable chord length and thickness which varies in proportion to the chord length. This enables the transition section to connect the thin wing to the thicker body. Each transition section has a negative sweep angle.

Floodplain Cross Section Lines

Data.gov (United States)

Department of Homeland Security — This table is required for any Digital Flood Insurance Rate Map database where cross sections are shown on the Flood Insurance Rate Map (FIRM). Normally any FIRM...

Combustor Section Acoustic Test

National Research Council Canada - National Science Library

Swanson, Andrew

2003-01-01

.... Following successful coupon and subelement tests on laser welding of Inco 625 heat exchangers, a full-scale scramjet flowpath section was fabricated to more realistically demonstrate the viability of the design concept...

Maternal and Fetal Outcome in Elective versus Emergency Cesarean Section

Directory of Open Access Journals (Sweden)

Anupama Suwal

2013-12-01

Results: The incidence of cesarean section was 254 (22.30% out of which emergency cesarean section accounted for 167 (65.7% and elective cesarean section for 87 (34.3%. The usual indications of emergency cesarean section were fetal distress, previous cesarean section in labour, non progress of labour and prolonged second stage of labour. The usual indications of elective cesarean section were previous cesarean section, breech, cephalopelvic disproportion and cesarean section on demand. There was found to be no significant difference in age, period of gestation, blood loss and blood transfusion in emergency vs. elective cesarean section. There was significant difference seen in the length of hospital stay, fever, urinary tract infection, wound infection and low APGAR in five minutes indicating that these were more common in emergency cesarean section. Significant difference was also seen in the incidence of postpartum haemorrhage indicating that it was seen more in elective cesarean section. Conclusions: The incidence of cesarean section in Nepal Medical College Teaching Hospital is high and the overall complication rate is higher in emergency cesarean section than in elective cesarean section. Keywords: cesarean section; fetal and maternal outcome.

Compilation of cross-sections. Pt. 1

International Nuclear Information System (INIS)

Flaminio, V.; Moorhead, W.G.; Morrison, D.R.O.; Rivoire, N.

1983-01-01

A compilation of integral cross-sections for hadronic reactions is presented. This is an updated version of CERN/HERA 79-1, 79-2, 79-3. It contains all data published up to the beginning of 1982, but some more recent data have also been included. Plots of the cross-sections versus incident laboratory momentum are also given. (orig.)

Compilation of cross-sections. Pt. 4

International Nuclear Information System (INIS)

Alekhin, S.I.; Ezhela, V.V.; Lugovsky, S.B.; Tolstenkov, A.N.; Yushchenko, O.P.; Baldini, A.; Cobal, M.; Flaminio, V.; Capiluppi, P.; Giacomelli, G.; Mandrioli, G.; Rossi, A.M.; Serra, P.; Moorhead, W.G.; Morrison, D.R.O.; Rivoire, N.

1987-01-01

This is the fourth volume in our series of data compilations on integrated cross-sections for weak, electromagnetic, and strong interaction processes. This volume covers data on reactions induced by photons, neutrinos, hyperons, and K L 0 . It contains all data published up to June 1986. Plots of the cross-sections versus incident laboratory momentum are also given. (orig.)

Assembling the LHC short straight sections

CERN Document Server

Maximilien Brice

2005-01-01

The building where the short straight sections are being assembled, was often called ‘Lego Land’ by the workers because of the wide variety of sets of magnets and cryostats. Short straight sections contain magnets for manipulating the beam inside cryostats with liquid helium to keep the magnets at a cool 1.9 K (-271.3°C).

Solid oxide fuel cell power plant having a fixed contact oxidation catalyzed section of a multi-section cathode air heat exchanger

Science.gov (United States)

Saito, Kazuo; Lin, Yao

2015-02-17

The multi-section cathode air heat exchanger (102) includes at least a first heat exchanger section (104), and a fixed contact oxidation catalyzed section (126) secured adjacent each other in a stack association. Cool cathode inlet air flows through cool air channels (110) of the at least first (104) and oxidation catalyzed sections (126). Hot anode exhaust flows through hot air channels (124) of the oxidation catalyzed section (126) and is combusted therein. The combusted anode exhaust then flows through hot air channels (112) of the first section (104) of the cathode air heat exchanger (102). The cool and hot air channels (110, 112) are secured in direct heat exchange relationship with each other so that temperatures of the heat exchanger (102) do not exceed 800.degree. C. to minimize requirements for using expensive, high-temperature alloys.

Use of frozen section in genitourinary pathology.

Science.gov (United States)

Shen, Steven S; Truong, Luan D; Ro, Jae Y; Ayala, Alberto G

2012-08-01

Frozen section diagnosis provides critical information for immediate surgical management decision making. Over the last several years, there have been some significant advances in treatment of genitourinary cancer, particularly with regard to surgical techniques. These changes in turn impact the type and frequency of intraoperative frozen section requests. In this review, we describe the main indications and diagnostic challenges of frozen section diagnosis during surgeries of each genitourinary organ system including prostate, kidney, bladder, testis, and penis. The pitfalls and approaches to different diagnostic situations are discussed. It is also stressed that pathologists must not only be familiar with the histological diagnosis, but also understand the limitations of frozen section diagnosis and communicate with urologists during the intraoperative treatment decision making process.

Transition section for acoustic waveguides

International Nuclear Information System (INIS)

Karplus, H.H.B.

1975-01-01

A means of facilitating the transmission of acoustic waves with minimal reflection between two regions having different specific acoustic impedances is described comprising a region exhibiting a constant product of cross-sectional area and specific acoustic impedance at each cross-sectional plane along the axis of the transition region. A variety of structures that exhibit this feature is disclosed, the preferred embodiment comprising a nested structure of doubly reentrant cones. This structure is useful for monitoring the operation of nuclear reactors in which random acoustic signals are generated in the course of operation

Classical scattering cross section in sputtering transport theory

International Nuclear Information System (INIS)

Zhang Zhulin

2002-01-01

For Lindhard scaling interaction potential scattering commonly used in sputtering theory, the authors analyzed the great difference between Sigmund's single power and the double power cross sections calculated. The double power cross sections can give a much better approximation to the Born-Mayer scattering in the low energy region (m∼0.1). In particular, to solve the transport equations by K r -C potential interaction given by Urbassek few years ago, only the double power cross sections (m∼0.1) can yield better approximate results for the number of recoils. Therefore, the Sigmund's single power cross section might be replaced by the double power cross sections in low energy collision cascade theory

Volcanology Section Bulletin. French Geologic Society; Bulletin de la Section de Volcanologie. Societe Geologique de France

Energy Technology Data Exchange (ETDEWEB)

Boudon, G [I.P.G.P. - Observatoire Volcanologique, 75 - Paris (France); Gourgaud, A [Universite Blaise Pascal, 63 - Clermont Ferrand (France); Soler, E [Universite Paris 6, Paris (France)

1997-12-31

This issue of the Volcanology Section Bulletin is a compilation of abstracts from the meeting the section of April, 2 1996 about the active volcanism of Central America and Mexico. The abstracts selected in this issue report on measurements of uranium, thorium and radium isotopes disequilibrium in lava, and radon fluctuations in volcanic gases. One abstract reports on new {sup 14}C datings on avalanche debris. (J.S.).

Volcanology Section Bulletin. French Geologic Society; Bulletin de la Section de Volcanologie. Societe Geologique de France

Energy Technology Data Exchange (ETDEWEB)

Boudon, G. [I.P.G.P. - Observatoire Volcanologique, 75 - Paris (France); Gourgaud, A. [Universite Blaise Pascal, 63 - Clermont Ferrand (France); Soler, E. [Universite Paris 6, Paris (France)

1996-12-31

This issue of the Volcanology Section Bulletin is a compilation of abstracts from the meeting the section of April, 2 1996 about the active volcanism of Central America and Mexico. The abstracts selected in this issue report on measurements of uranium, thorium and radium isotopes disequilibrium in lava, and radon fluctuations in volcanic gases. One abstract reports on new {sup 14}C datings on avalanche debris. (J.S.).

Broad ion beam serial section tomography

Energy Technology Data Exchange (ETDEWEB)

Winiarski, B., E-mail: b.winiarski@manchester.ac.uk [School of Materials, University of Manchester, Manchester M13 9PL (United Kingdom); Materials Division, National Physical Laboratory, Teddington TW11 0LW (United Kingdom); Gholinia, A. [School of Materials, University of Manchester, Manchester M13 9PL (United Kingdom); Mingard, K.; Gee, M. [Materials Division, National Physical Laboratory, Teddington TW11 0LW (United Kingdom); Thompson, G.E.; Withers, P.J. [School of Materials, University of Manchester, Manchester M13 9PL (United Kingdom)

2017-01-15

Here we examine the potential of serial Broad Ion Beam (BIB) Ar{sup +} ion polishing as an advanced serial section tomography (SST) technique for destructive 3D material characterisation for collecting data from volumes with lateral dimensions significantly greater than 100 µm and potentially over millimetre sized areas. Further, the associated low level of damage introduced makes BIB milling very well suited to 3D EBSD acquisition with very high indexing rates. Block face serial sectioning data registration schemes usually assume that the data comprises a series of parallel, planar slices. We quantify the variations in slice thickness and parallelity which can arise when using BIB systems comparing Gatan PECS and Ilion BIB systems for large volume serial sectioning and 3D-EBSD data acquisition. As a test case we obtain 3D morphologies and grain orientations for both phases of a WC-11%wt. Co hardmetal. In our case we have carried out the data acquisition through the manual transfer of the sample between SEM and BIB which is a very slow process (1–2 slice per day), however forthcoming automated procedures will markedly speed up the process. We show that irrespective of the sectioning method raw large area 2D-EBSD maps are affected by distortions and artefacts which affect 3D-EBSD such that quantitative analyses and visualisation can give misleading and erroneous results. Addressing and correcting these issues will offer real benefits when large area (millimetre sized) automated serial section BIBS is developed. - Highlights: • In this work we examine how microstructures can be reconstructed in three-dimensions (3D) by serial argon broad ion beam (BIB) milling, enabling much larger volumes (>250×250×100µm{sup 3}) to be acquired than by serial section focused ion beam-scanning electron microscopy (FIB-SEM). • The associated low level of damage introduced makes BIB milling very well suited to 3D-EBSD acquisition with very high indexing rates. • We explore

Cross section data for ionization of important cyanides

International Nuclear Information System (INIS)

Kaur, Jaspreet; Antony, Bobby

2015-01-01

Highlights: • Multi centre spherical complex optical potential formalism used to find the CS. • Effective method (CSP-ic) to derive ionization contribution from inelastic CS. • Result shows excellent accord with previous results and consistent behaviour. • Maiden attempt to find CS for many cyanide molecules. • Strong correlation observed between peak of ionization with target properties. - Abstract: This article presents cross section calculations for interactions of important cyanides with electrons possessing energies beginning from ionization threshold of the target molecule to 5 keV. These data are pursued to meet the ever increasing demand for cross sections by the relevant atomic and molecular community for modelling astrophysical, atmospheric and technological domains. The calculations have been executed using an amalgam of multi centre spherical complex optical potential (MSCOP) formalism and complex scattering potential-ionization contribution (CSP-ic) method. Cross sections are compared with experimental and theoretical data wherever available. Strong correlations are observed for the cross sections which affirms consistent and reliable cross sections. Isomeric effect has been interpreted using variation of cross section with structure and target properties. Our cross sections will be tabulated in atomic collision database for use in modelling various statistical and dynamical quantities.

Cross section data for ionization of important cyanides

Energy Technology Data Exchange (ETDEWEB)

Kaur, Jaspreet; Antony, Bobby, E-mail: bka.ism@gmail.com

2015-11-15

Highlights: • Multi centre spherical complex optical potential formalism used to find the CS. • Effective method (CSP-ic) to derive ionization contribution from inelastic CS. • Result shows excellent accord with previous results and consistent behaviour. • Maiden attempt to find CS for many cyanide molecules. • Strong correlation observed between peak of ionization with target properties. - Abstract: This article presents cross section calculations for interactions of important cyanides with electrons possessing energies beginning from ionization threshold of the target molecule to 5 keV. These data are pursued to meet the ever increasing demand for cross sections by the relevant atomic and molecular community for modelling astrophysical, atmospheric and technological domains. The calculations have been executed using an amalgam of multi centre spherical complex optical potential (MSCOP) formalism and complex scattering potential-ionization contribution (CSP-ic) method. Cross sections are compared with experimental and theoretical data wherever available. Strong correlations are observed for the cross sections which affirms consistent and reliable cross sections. Isomeric effect has been interpreted using variation of cross section with structure and target properties. Our cross sections will be tabulated in atomic collision database for use in modelling various statistical and dynamical quantities.

The safe motherhood referral system to reduce cesarean sections and perinatal mortality - a cross-sectional study [1995-2006

Directory of Open Access Journals (Sweden)

Rudge Marilza VC

2011-11-01

Full Text Available Abstract Background In 2000, the eight Millennium Development Goals (MDGs set targets for reducing child mortality and improving maternal health by 2015. Objective To evaluate the results of a new education and referral system for antenatal/intrapartum care as a strategy to reduce the rates of Cesarean sections (C-sections and maternal/perinatal mortality. Methods Design: Cross-sectional study. Setting: Department of Gynecology and Obstetrics, Botucatu Medical School, Sao Paulo State University/UNESP, Brazil. Population: 27,387 delivering women and 27,827 offspring. Data collection: maternal and perinatal data between 1995 and 2006 at the major level III and level II hospitals in Botucatu, Brazil following initiation of a safe motherhood education and referral system. Main outcome measures: Yearly rates of C-sections, maternal (/100,000 LB and perinatal (/1000 births mortality rates at both hospitals. Data analysis: Simple linear regression models were adjusted to estimate the referral system's annual effects on the total number of deliveries, C-section and perinatal mortality ratios in the two hospitals. The linear regression were assessed by residual analysis (Shapiro-Wilk test and the influence of possible conflicting observations was evaluated by a diagnostic test (Leverage, with p Results Over the time period evaluated, the overall C-section rate was 37.3%, there were 30 maternal deaths (maternal mortality ratio = 109.5/100,000 LB and 660 perinatal deaths (perinatal mortality rate = 23.7/1000 births. The C-section rate decreased from 46.5% to 23.4% at the level II hospital while remaining unchanged at the level III hospital. The perinatal mortality rate decreased from 9.71 to 1.66/1000 births and from 60.8 to 39.6/1000 births at the level II and level III hospital, respectively. Maternal mortality ratios were 16.3/100,000 LB and 185.1/100,000 LB at the level II and level III hospitals. There was a shift from direct to indirect causes of

Methodology series module 3: Cross-sectional studies

Directory of Open Access Journals (Sweden)

Maninder Singh Setia

2016-01-01

Full Text Available Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case–control studies (participants selected based on the outcome status or cohort studies (participants selected based on the exposure status, the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design.

Methodology Series Module 3: Cross-sectional Studies.

Science.gov (United States)

Setia, Maninder Singh

2016-01-01

Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case-control studies (participants selected based on the outcome status) or cohort studies (participants selected based on the exposure status), the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design.

Ulcers of anthral and pyloric section of stomach

International Nuclear Information System (INIS)

Oster, A.N.

1986-01-01

Roentgenological symptoms of the ulcer of anthral and pyloric sections of the stomach, as well as the roentgenological image of the topography of the mucous membrane of these sections during ulcerations are given. Complexity of ulcer differentiation of these sections and their roentgenological detection are emphasized

Criticality benchmark comparisons leading to cross-section upgrades

International Nuclear Information System (INIS)

Alesso, H.P.; Annese, C.E.; Heinrichs, D.P.; Lloyd, W.R.; Lent, E.M.

1993-01-01

For several years criticality benchmark calculations with COG. COG is a point-wise Monte Carlo code developed at Lawrence Livermore National Laboratory (LLNL). It solves the Boltzmann equation for the transport of neutrons and photons. The principle consideration in developing COG was that the resulting calculation would be as accurate as the point-wise cross-sectional data, since no physics computational approximations were used. The objective of this paper is to report on COG results for criticality benchmark experiments in concert with MCNP comparisons which are resulting in corrections an upgrades to the point-wise ENDL cross-section data libraries. Benchmarking discrepancies reported here indicated difficulties in the Evaluated Nuclear Data Livermore (ENDL) cross-sections for U-238 at thermal neutron energy levels. This led to a re-evaluation and selection of the appropriate cross-section values from several cross-section sets available (ENDL, ENDF/B-V). Further cross-section upgrades anticipated

40 CFR 52.2465 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section. 52.2465 Section 52.2465 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Original identification of plan section. (a) This section identifies the original “Air Implementation Plan...

40 CFR 52.2186 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section. 52.2186 Section 52.2186 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Original identification of plan section. (a) This section identifies the original “Air Implementation Plan...

40 CFR 52.1100 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section. 52.1100 Section 52.1100 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Original identification of plan section. (a) This section identifies the original “Air Implementation Plan...

40 CFR 52.1281 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section. 52.1281 Section 52.1281 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Original identification of plan section. (a) This section identifies the original “Air Implementation Plan...

40 CFR 52.1426 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section. 52.1426 Section 52.1426 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Original identification of plan section. (a) This section identifies the original “Nebraska Air Quality...

40 CFR 52.1535 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section. 52.1535 Section 52.1535 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Original identification of plan section. (a) This section identifies the original “Air Implementation Plan...

40 CFR 52.1783 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section. 52.1783 Section 52.1783 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Original identification of plan section. (a) This section identifies the original “Air Implementation Plan...

40 CFR 52.2239 - Original Identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original Identification of plan section. 52.2239 Section 52.2239 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Original Identification of plan section. (a) This section identifies the original “Tennessee Air Pollution...

A microfluidic approach to water-rock interactions using thin rock sections: Pb and U sorption onto thin shale and granite sections

Energy Technology Data Exchange (ETDEWEB)

Oh, Youn Soo [Institute of Mine Reclamation Technology, Mine Reclamation Corp., 2 Segye-ro, Wonju-si, Gangwon-do, 26464 (Korea, Republic of); Jo, Ho Young, E-mail: hyjo@korea.ac.kr [Department of Earth and Environmental Sciences, Korea University, Anam-dong, Seongbuk-gu, Seoul, 02841 (Korea, Republic of); Ryu, Ji-Hun; Kim, Geon-Young [Korea Atomic Energy Research Institute, 1045 Daedeokdaero, Yuseong-gu, Daejeon, 34057 (Korea, Republic of)

2017-02-15

Highlights: • Microfluidic tests was used to investigate water-rock (mineral) interactions. • Pb and U sorption onto thin shale and granite sections was evaluated. • Pb removal by thin shale section is related primarily to Fe-containing minerals. • A slightly larger amount of U was removed onto the thin granite section with Fe-containing minerals. - Abstract: The feasibility of using microfluidic tests to investigate water-rock (mineral) interactions in fractures regarding sorption onto thin rock sections (i.e., shale and granite) of lead (Pb) and uranium (U) was evaluated using a synthetic PbCl{sub 2} solution and uranium-containing natural groundwater as fluids. Effluent composition and element distribution on the thin rock sections before and after microfluidic testing were analyzed. Most Pb removal (9.8 mg/cm{sup 2}) occurred within 3.5 h (140 PVF), which was 74% of the total Pb removal (13.2 mg/cm{sup 2}) at the end of testing (14.5 h, 560 PVF). Element composition on the thin shale sections determined by μ-XRF analysis indicated that Pb removal was related primarily to Fe-containing minerals (e.g., pyrite). Two thin granite sections (biotite rich, Bt-R and biotite poor, Bt-P) exhibited no marked difference in uranium removal capacity, but a slightly higher amount of uranium was removed onto the thin Bt-R section (266 μg/cm{sup 2}) than the thin Bt-P section (240 μg/cm{sup 2}) within 120 h (4800 PVF). However, uranium could not be detected by micro X-ray fluorescence (μ-XRF) analysis, likely due to the detection limit. These results suggest that microfluidic testing on thin rock sections enables quantitative evaluation of rock (mineral)-water interactions at the micro-fracture or pore scale.

Evaluation of fusion-evaporation cross-section calculations

Science.gov (United States)

Blank, B.; Canchel, G.; Seis, F.; Delahaye, P.

2018-02-01

Calculated fusion-evaporation cross sections from five different codes are compared to experimental data. The present comparison extents over a large range of nuclei and isotopic chains to investigate the evolution of experimental and calculated cross sections. All models more or less overestimate the experimental cross sections. We found reasonable agreement by using the geometrical average of the five model calculations and dividing the average by a factor of 11.2. More refined analyses are made for example for the 100Sn region.

Model cross section calculations using LAHET

International Nuclear Information System (INIS)

Prael, R.E.

1992-01-01

The current status of LAHET is discussed. The effect of a multistage preequilibrium exciton model following the INC is examined for neutron emission benchmark calculations, as is the use of a Fermi breakup model for light nuclei rather than an evaporation model. Comparisons are made also for recent fission cross section experiments, and a discussion of helium production cross sections is presented

Interference analysis of fission cross section

International Nuclear Information System (INIS)

Toshkov, S.A.; Yaneva, N.B.

1976-01-01

The formula for the reaction cross-section based on the R-matrix formalism considering the interference between the two neighbouring resonances, referred to the same value of total momentum was used for the analysis of the cross-section of resonance neutron induced fission of 230Pu. The experimental resolution and thermal motion of the target nuclei were accounted for numerical integration

FENDL/E-2.0. Evaluated nuclear data library of neutron-nucleus interaction cross sections and photon production cross sections and photon-atom interaction cross sections for fusion applications. Version 1, March 1997. Summary documentation

International Nuclear Information System (INIS)

Pashchenko, A.B.; Wienke, H.

1998-01-01

This document presents the description of a physical tape containing the basic evaluated nuclear data library of neutron-nucleus interaction cross sections, photon production cross sections and photon-atom interaction cross sections for fusion applications. It is part of the evaluated nuclear data library for fusion applications FENDL-2. The data are available cost-free from the Nuclear Data Section upon request. The data can also be retrieved by the user via online access through international computer networks. (author)

Microscopic cross sections: An utopia?

Energy Technology Data Exchange (ETDEWEB)

Hilaire, S. [CEA Bruyeres-le-Chatel, DIF 91 (France); Koning, A.J. [Nuclear Research and Consultancy Group, PO Box 25, 1755 ZG Petten (Netherlands); Goriely, S. [Institut d' Astronomie et d' Astrophysique, Universite Libre de Bruxelles, Campus de la Plaine, CP 226, 1050 Brussels (Belgium)

2010-07-01

The increasing need for cross sections far from the valley of stability poses a challenge for nuclear reaction models. So far, predictions of cross sections have relied on more or less phenomenological approaches, depending on parameters adjusted to available experimental data or deduced from systematical relations. While such predictions are expected to be reliable for nuclei not too far from the experimentally known regions, it is clearly preferable to use more fundamental approaches, based on sound physical bases, when dealing with very exotic nuclei. Thanks to the high computer power available today, all major ingredients required to model a nuclear reaction can now be (and have been) microscopically (or semi-microscopically) determined starting from the information provided by a nucleon-nucleon effective interaction. We have implemented all these microscopic ingredients in the TALYS nuclear reaction code, and we are now almost able to perform fully microscopic cross section calculations. The quality of these ingredients and the impact of using them instead of the usually adopted phenomenological parameters will be discussed. (authors)

Microscopic cross sections: An utopia?

International Nuclear Information System (INIS)

Hilaire, S.; Koning, A.J.; Goriely, S.

2010-01-01

The increasing need for cross sections far from the valley of stability poses a challenge for nuclear reaction models. So far, predictions of cross sections have relied on more or less phenomenological approaches, depending on parameters adjusted to available experimental data or deduced from systematical relations.While such predictions are expected to be reliable for nuclei not too far from the experimentally known regions, it is clearly preferable to use more fundamental approaches, based on sound physical bases, when dealing with very exotic nuclei. Thanks to the high computer power available today, all major ingredients required to model a nuclear reaction can now be (and have been) microscopically (or semi-microscopically) determined starting from the information provided by a nucleon-nucleon effective interaction. We have implemented all these microscopic ingredients in the TALYS nuclear reaction code, and we are now almost able to perform fully microscopic cross section calculations. The quality of these ingredients and the impact of using them instead of the usually adopted phenomenological parameters will be discussed. (authors)

Wound Infection following Caesarean Section in a University ...

African Journals Online (AJOL)

Background: Caesarean section is a common operation in obstetric practice, but there is a general aversion to caesarean section amongst Nigerian women due to a myriad of reasons amongst which are its associated morbidity and mortality. Surgical site infection following caesarean section is both a major cause of ...

26 CFR 1.382-5 - Section 382 limitation.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 4 2010-04-01 2010-04-01 false Section 382 limitation. 1.382-5 Section 1.382-5 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Insolvency Reorganizations § 1.382-5 Section 382 limitation. (a) Scope. Following an...

40 CFR 52.1640 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section. 52.1640 Section 52.1640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Original identification of plan section. (a) This section identifies the original “State of New Mexico...

Fission cross section measurements of actinides at LANSCE

Energy Technology Data Exchange (ETDEWEB)

Tovesson, Fredrik [Los Alamos National Laboratory; Laptev, Alexander B [Los Alamos National Laboratory; Hill, Tony S [INL

2010-01-01

Fission cross sections of a range of actinides have been measured at the Los Alamos Neutron Science Center (LANSCE) in support of nuclear energy applications. By combining measurement at two LANSCE facilities, Lujan Center and the Weapons Neutron Research center (WNR), differential cross sections can be measured from sub-thermal energies up to 200 MeV. Incident neutron energies are determined using the time-of-flight method, and parallel-plate ionization chambers are used to measure fission cross sections relative to the {sup 235}U standard. Recent measurements include the {sup 233,238}U, {sup 239,242}Pu and {sup 243}Am neutron-induced fission cross sections. In this paper preliminary results for cross section data of {sup 243}Am and {sup 233}U will be presented.

76 FR 53880 - Funds Availability for Section 514 Farm Labor Housing Loans and Section 516 Farm Labor Housing...

Science.gov (United States)

2011-08-30

... DEPARTMENT OF AGRICULTURE Rural Housing Service Funds Availability for Section 514 Farm Labor Housing Loans and Section 516 Farm Labor Housing Grants for Off-Farm Housing for Fiscal Year 2011 AGENCY: Rural Housing Service, USDA. ACTION: Notice; correction. SUMMARY: This notice corrects the scoring...

Cesarean section in Ethiopia: prevalence and sociodemographic characteristics.

Science.gov (United States)

Yisma, Engida; Smithers, Lisa G; Lynch, John W; Mol, Ben W

2017-11-20

The objective of this study was to assess the prevalence and sociodemographic characteristics of cesarean section in Ethiopia. We used data collected for Ethiopia Demographic and Health Surveys (DHS) conducted in 2000, 2005, 2011, and 2016. A two-stage, stratified, clustered random sampling design was used to gather information from women who gave birth within the 5-year period before each of the surveys. We analyzed the data to identify sociodemographic characteristics associated with cesarean section using log-Poisson regression models. The national cesarean section rate increased from 0.7% in 2000 to 1.9% in 2016, with increases across seven of the eleven administrative regions of Ethiopia. Addis Ababa had the highest cesarean section rate (21.4%) in 2016 and the greatest increase since 2000. In the adjusted analysis, women who gave birth in private health facility had a 78.0% higher risk of cesarean section (adjusted prevalence ratio (aPR) (95% CI) 1.78 (1.22, 2.58)) compared with women who gave birth in public health facility. Having four or more births was associated with a lower risk of cesarean section compared with first births (aPR (95% CI) 0.36 (0.16, 0.79)). The Ethiopian national cesarean section rate is about 2%, but the rate varies widely among administrative regions, suggesting unequal access. Cesarean sections were highest among urban mothers, first births, births to women with higher education, and births to women from the richest quintile of household wealth.

New airfoil sections for straight bladed turbine

Science.gov (United States)

Boumaza, B.

1987-07-01

A theoretical investigation of aerodynamic performance for vertical axis Darrieus wind turbine with new airfoils sections is carried out. The blade section aerodynamics characteristics are determined from turbomachines cascade model. The model is also adapted to the vertical Darrieus turbine for the performance prediction of the machine. In order to choose appropriate value of zero-lift-drag coefficient in calculation, an analytical expression is introduced as function of chord-radius ratio and Reynolds numbers. New airfoils sections are proposed and analyzed for straight-bladed turbine.

New airfoil sections for straight bladed turbine

International Nuclear Information System (INIS)

Boumaza, B.

1987-07-01

A theoretical investigation of aerodynamic performance for vertical axis Darrieus wind turbine with new airfoils sections is carried out. The blade section aerodynamics characteristics are determined from turbomachines cascade model. The model is also adapted to the vertical Darrieus turbine for the performance prediction of the machine. In order to choose appropriate value of zero-lift-drag coefficient in calculation, an analytical expression is introduced as function of chord-radius ratio and Reynolds numbers. New airfoils sections are proposed and analyzed for straight-bladed turbine

Total reaction cross sections and neutron-removal cross sections of neutron-rich light nuclei measured by the COMBAS fragment-separator

Science.gov (United States)

Hue, B. M.; Isataev, T.; Erdemchimeg, B.; Artukh, A. G.; Aznabaev, D.; Davaa, S.; Klygin, S. A.; Kononenko, G. A.; Khuukhenkhuu, G.; Kuterbekov, K.; Lukyanov, S. M.; Mikhailova, T. I.; Maslov, V. A.; Mendibaev, K.; Sereda, Yu M.; Penionzhkevich, Yu E.; Vorontsov, A. N.

2017-12-01

Preliminary results of measurements of the total reaction cross sections σR and neutron removal cross section σ-xn for weakly bound 6He, 8Li, 9Be and 10Be nuclei at energy range (20-35) A MeV with 28Si target is presented. The secondary beams of light nuclei were produced by bombardment of the 22Ne (35 A MeV) primary beam on Be target and separated by COMBAS fragment-separator. In dispersive focal plane a horizontal slit defined the momentum acceptance as 1% and a wedge degrader of 200 μm Al was installed. The Bρ of the second section of the fragment-separator was adjusted for measurements in energy range (20-35) A MeV. Two-neutron removal cross sections for 6He and 10Be and one -neutron removal cross sections 8Li and 9Be were measured.

Cross section homogenization analysis for a simplified Candu reactor

International Nuclear Information System (INIS)

Pounders, Justin; Rahnema, Farzad; Mosher, Scott; Serghiuta, Dumitru; Turinsky, Paul; Sarsour, Hisham

2008-01-01

The effect of using zero current (infinite medium) boundary conditions to generate bundle homogenized cross sections for a stylized half-core Candu reactor problem is examined. Homogenized cross section from infinite medium lattice calculations are compared with cross sections homogenized using the exact flux from the reference core environment. The impact of these cross section differences is quantified by generating nodal diffusion theory solutions with both sets of cross sections. It is shown that the infinite medium spatial approximation is not negligible, and that ignoring the impact of the heterogeneous core environment on cross section homogenization leads to increased errors, particularly near control elements and the core periphery. (authors)

Total cross-section measurements progress in nuclear physics

CERN Document Server

Giacomelli, G; Mulvey, J H

2013-01-01

Total Cross-Section Measurements discusses the cross-sectional dimensions of elementary hadron collisions. The main coverage of the book is the resonance and high energy area of the given collision. A section of the book explains in detail the characteristic of a resonance region. Another section is focused on the location of the high energy region of collision. Parts of the book define the meaning of resonance in nuclear physics. Also explained are the measurement of resonance and the identification of the area where the resonance originates. Different experimental methods to measure the tota

Cesarean section and offspring's risk of multiple sclerosis

DEFF Research Database (Denmark)

Nielsen, Nete M; Bager, Peter; Stenager, Egon

2013-01-01

Apart from a recent study reporting a 2- to 3-fold increased risk of multiple sclerosis (MS) among women and men who were delivered by Cesarean section (C-section), little attention has been given to the possible association between mode of delivery and the risk of MS.......Apart from a recent study reporting a 2- to 3-fold increased risk of multiple sclerosis (MS) among women and men who were delivered by Cesarean section (C-section), little attention has been given to the possible association between mode of delivery and the risk of MS....

A Pebble Bed Reactor cross section methodology

International Nuclear Information System (INIS)

Hudson, Nathanael H.; Ougouag, Abderrafi M.; Rahnema, Farzad; Gougar, Hans

2009-01-01

A method is presented for the evaluation of microscopic cross sections for the Pebble Bed Reactor (PBR) neutron diffusion computational models during convergence to an equilibrium (asymptotic) fuel cycle. This method considers the isotopics within a core spectral zone and the leakages from such a zone as they arise during reactor operation. The randomness of the spatial distribution of fuel grains within the fuel pebbles and that of the fuel and moderator pebbles within the core, the double heterogeneity of the fuel, and the indeterminate burnup of the spectral zones all pose a unique challenge for the computation of the local microscopic cross sections. As prior knowledge of the equilibrium composition and leakage is not available, it is necessary to repeatedly re-compute the group constants with updated zone information. A method is presented to account for local spectral zone composition and leakage effects without resorting to frequent spectrum code calls. Fine group data are pre-computed for a range of isotopic states. Microscopic cross sections and zone nuclide number densities are used to construct fine group macroscopic cross sections, which, together with fission spectra, flux modulation factors, and zone buckling, are used in the solution of the slowing down balance to generate a new or updated spectrum. The microscopic cross-sections are then re-collapsed with the new spectrum for the local spectral zone. This technique is named the Spectral History Correction (SHC) method. It is found that this method accurately recalculates local broad group microscopic cross sections. Significant improvement in the core eigenvalue, flux, and power peaking factor is observed when the local cross sections are corrected for the effects of the spectral zone composition and leakage in two-dimensional PBR test problems.

New Records of Five Ennomine Moths (Lepidoptera: Geometridae; Ennominae from Korea

Directory of Open Access Journals (Sweden)

Choi, Sei-Woong

2015-04-01

Full Text Available The subfamily Ennominae is one of the most species-rich taxa of Geometridae that include more than 9,700 species worldwide and over 280 species in South Korea. Herein, we present the first report of five species of Ennominae. Abraxas flavisinuata can be characterized by the white wings, a thick black postmedial line that is medially and dorsally broken with an orange band, large rounded black discal dots on the forewing, and a black dotted postmedial line on the hindwing. Lomographa claripennis can be characterized by the whitish wings, the black undulating postmedial line as well as the minute blackish discal dot on the forewing, and the black undulating postmedial line with a minute black discal dot on the hindwing. Arichanna tetrica can be characterized by the grayish forewings, thick black transverse ante- and postmedial lines, a large blackish discal dot, whitish apical streak on the forewing, and scattered black dots on the whitish hindwing. Apocleora rimosa can be characterized by the brown ground color of the fore- and hindwings, the black slanted ante- and postmedial lines of the forewing, and two black medial lines on the hindwing. Ourapteryx japonica can be characterized by the white wings, the dark brown transverse ante- and postmedial lines with a long discal dot on the forewing, and the dark brownish transverse antemedial line as well as a termen that has a sharp white tail with one large dark reddish dot and one small black dot on the hindwing.

Transport cross section for small-angle scattering

International Nuclear Information System (INIS)

D'yakonov, M.I.; Khaetskii, A.V.

1991-01-01

Classical mechanics is valid for describing potential scattering under the conditions (1) λ much-lt α and (2) U much-gt ℎυ/α, where λ is the de Broglie wavelength, α is the characteristic size of the scatterer, U is the characteristic value of the potential energy, and υ is the velocity of the scattered particle. The second of these conditions means that the typical value of the classical scattering angle is far larger than the diffraction angle λ/α. In this paper the authors show that this second condition need not hold in a derivation of the transport cross section. In other words, provided that the condition λ much-lt α holds, it is always possible to calculate the transport cross section from the expressions of classical mechanics, even in the region U approx-lt ℎυ/α, where the scattering is diffractive,and the differential cross section is greatly different from the classical cross section. The transport cross section is found from the classical expression even in the anticlassical case U much-lt ℎυ/α, where the Born approximation can be used

A Study of Aerodynamics in Kevlar-Wall Test Sections

OpenAIRE

Brown, Kenneth Alexander

2014-01-01

This study is undertaken to characterize the aerodynamic behavior of Kevlar-wall test sections and specifically those containing two-dimensional, lifting models. The performance of the Kevlar-wall test section can be evaluated against the standard of the hard-wall test section, which in the case of the Stability Wind Tunnel (SWT) at Virginia Tech can be alternately installed or replaced by the Kevlar-wall test section. As a first step towards the evaluation of the Kevlar-wall test section aer...

ENDF/B-5 fission product cross section evaluations

International Nuclear Information System (INIS)

Schenter, R.E.; England, T.R.

1979-12-01

Cross section evaluations were made for the 196 fission product nuclides on the ENDF/B-5 data files. Most of the evaluations involve updating the capture cross sections of the important absorbers for fast and thermal reactor systems. This included updating thermal values, resonance integrals, resonance parameter sets, and fast capture cross sections. For the fast capture results generalized least-squares calculations were made with the computer code FERRET. Input for these cross section adjustments included nuclear models calculations and both integral and differential experimental data results. The differential cross sections and their uncertainties were obtained from the CSIRS library. Integral measurement results came from CFRMF and STEK Assemblies 500, 1000, 2000, 3000, 4000. Comparisons of these evaluations with recent capture measurements are shown. 15 figures, 10 tables

Nuclear fission and neutron-induced fission cross-sections

Energy Technology Data Exchange (ETDEWEB)

James, G.D.; Lynn, J.E.; Michaudon, A.; Rowlands, J.; de Saussure, G.

1981-01-01

A general presentation of current knowledge of the fission process is given with emphasis on the low energy fission of actinide nuclei and neutron induced fission. The need for and the required accuracy of fission cross section data in nuclear energy programs are discussed. A summary is given of the steps involved in fission cross section measurement and the range of available techniques. Methods of fission detection are described with emphasis on energy dependent changed and detector efficiency. Examples of cross section measurements are given and data reduction is discussed. The calculation of fission cross sections is discussed and relevant nuclear theory including the formation and decay of compound nuclei and energy level density is introduced. A description of a practical computation of fission cross sections is given.

Nonelastic-scattering cross sections of elemental nickel

International Nuclear Information System (INIS)

Smith, A.B.; Guenther, P.T.; Whalen, J.F.

1980-06-01

Neutron total cross sections of elemental nickel were measured from 1.3 to 4.5 MeV, at intervals of approx. 50 keV, with resolutions of 30 to 50 keV and to accuracies of 1 to 2.5%. Neutron differential-elastic-scattering cross sections were measured from 1.45 to 3.8 MeV, at intervals and with resolutions comparable to those of the total cross sections, and to accuracies of 3 to 5%. The nonelastic-scattering cross section is derived from the measured values to accuracies of greater than or equal to 6%. The experimental results are compared with previously reported values as represented by ENDF/B-V, and areas of consistency and discrepancy, noted. The measured results are shown to be in good agreement with the predictions of a model previously reported by the authors. 4 figures, 1 table

Epidemio-Clinical Factors Associated with Caesarean Section in ...

African Journals Online (AJOL)

Abstract Caesarean section incurs significant cost and poses a hindrance to healthcare. The aim of the study was to determine maternal, foetal outcomes and cost. This was a cross sectional study conducted at the two health facilities. The study covered an eight month period. The rate of caesarean section was 5.69% and ...

Measurements of fission cross-sections. Chapter 4

International Nuclear Information System (INIS)

James, G.D.

1981-01-01

The steps involved in the measurement of fission cross sections are summarized and the range of techniques available are considered. Methods of fission detection are described with particular emphasis on the neutron energy dependent properties of the fission process and the details of fragment energy loss which can lead to energy-dependent changes in detector efficiency. Selected examples of fission cross-section measurements are presented and methods of data reduction, storage, analysis and evaluation, are examined. Finally requested accuracies for fission cross section data are compared to estimated available accuracies. (U.K.)

26 CFR 1.1245-6 - Relation of section 1245 to other sections.

Science.gov (United States)

2010-04-01

... accounting treatment of asset retirements), does not require recognition of such gain. (d) Installment method... 1231 (relating to property used in the trade or business), the gain recognized under section 1245(a)(1...). For limitation on amount of adjustments reflected in adjusted basis of property disposed of by an...

Vibrational enhancement of total breakup cross sections

International Nuclear Information System (INIS)

Haftel, M.I.; Lim, T.K.

1984-01-01

This paper considers the role of multi-two-body bound states, namely vibrational excitations, on total three-body breakup cross-sections. Total cross-sections are usually easy to measure, and they play a fundamental role in chemical kinetics. (orig.)

Total cross sections for electron scattering by He

International Nuclear Information System (INIS)

De Heer, F.J.; Jansen, R.H.J.

1977-01-01

A set of total cross sections for scattering of electrons by He has been evaluated over the energy range of zero to 3000 eV by means of the analysis of experiments and theories on total cross sections for elastic scattering, ionisation and excitation, and on differential cross sections for elastic and inelastic scattering. Between 0 and 19.8 eV, where no inelastic processes occur, the total cross sections for scattering are equal to those for elastic scattering. Above 19.8 eV total cross sections for scattering of electrons have been evaluated by adding those for ionisation, excitation and elastic scattering. The total cross sections thus obtained are probably accurate to about 5% over a large part of the energy range. They appear to be in very good agreement with the recent experimental results of Blaauw et al. (J. Phys. B.; 10:L299 (1977)). The present results have already proved useful for application in the dispersion relation for forward scattering in electron-helium collisions. (author)

14 CFR Section 19 - Uniform Classification of Operating Statistics

Science.gov (United States)

2010-01-01

... Statistics Section 19 Section 19 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION... AIR CARRIERS Operating Statistics Classifications Section 19 Uniform Classification of Operating Statistics ...

Heisenberg rise of total cross sections

International Nuclear Information System (INIS)

Ezhela, V.V.; Yushchenko, O.P.

1988-01-01

It is shown that on the basis of the original idea of Heisenberg on the quasiclassical picture of extended particle interactions one can construct a satisfactory description of the total cross sections, elastic cross sections, elastic diffractive slopes and mean charged multiplicities in the cm energy range from 5 to 900 GeV, and produce reasonable extrapolations up to several tens of TeV. 14 refs.; 7 figs.; 2 tabs

Fragmentation cross sections outside the limiting-fragmentation regime

CERN Document Server

Sümmerer, K

2003-01-01

The empirical parametrization of fragmentation cross sections, EPAX, has been successfully applied to estimate fragment production cross sections in reactions of heavy ions at high incident energies. It is checked whether a similar parametrization can be found for proton-induced spallation around 1 GeV, the range of interest for ISOL-type RIB facilities. The validity of EPAX for medium-energy heavy-ion induced reactions is also checked. Only a few datasets are available, but in general EPAX predicts the cross sections rather well, except for fragments close to the projectile, where the experimental cross sections are found to be larger.

Target dependence of K+-nucleus total cross sections

International Nuclear Information System (INIS)

Jiang, M.F.; Ernst, D.J.; Chen, C.M.

1995-01-01

We investigate the total cross section and its target dependence for K + -nucleus scattering using a relativistic momentum-space optical potential model which incorporates relativistically normalized wave functions, invariant two-body amplitudes, covariant kinematics, and an exact full-Fermi averaging integral. The definition of the total cross section in the presence of a Coulomb interaction is reviewed and the total cross section is calculated in a way that is consistent with what is extracted from experiment. In addition, the total cross sections for a nucleus and for the deuteron are calculated utilizing the same theory. This minimizes the dependence of the ratio of these cross sections on the details of the theory. The model dependence of the first-order optical potential calculations is investigated. The theoretical results are found to be systematically below all existing data

Cross Sections for Inner-Shell Ionization by Electron Impact

Energy Technology Data Exchange (ETDEWEB)

Llovet, Xavier, E-mail: xavier@ccit.ub.edu [Centres Científics i Tecnològics, Universitat de Barcelona, Lluís Solé i Sabarís 1-3, 08028 Barcelona (Spain); Powell, Cedric J. [Materials Measurement Science Division, National Institute of Standards and Technology, Gaithersburg, Maryland 20899-8370 (United States); Salvat, Francesc [Facultat de Física (ECM and ICC), Universitat de Barcelona, Diagonal 645, 08028 Barcelona (Spain); Jablonski, Aleksander [Institute of Physical Chemistry, Polish Academy of Sciences, ul. Kasprzaka 44/52, 01-224 Warsaw (Poland)

2014-03-15

An analysis is presented of measured and calculated cross sections for inner-shell ionization by electron impact. We describe the essentials of classical and semiclassical models and of quantum approximations for computing ionization cross sections. The emphasis is on the recent formulation of the distorted-wave Born approximation by Bote and Salvat [Phys. Rev. A 77, 042701 (2008)] that has been used to generate an extensive database of cross sections for the ionization of the K shell and the L and M subshells of all elements from hydrogen to einsteinium (Z = 1 to Z = 99) by electrons and positrons with kinetic energies up to 1 GeV. We describe a systematic method for evaluating cross sections for emission of x rays and Auger electrons based on atomic transition probabilities from the Evaluated Atomic Data Library of Perkins et al. [Lawrence Livermore National Laboratory, UCRL-ID-50400, 1991]. We made an extensive comparison of measured K-shell, L-subshell, and M-subshell ionization cross sections and of Lα x-ray production cross sections with the corresponding calculated cross sections. We identified elements for which there were at least three (for K shells) or two (for L and M subshells) mutually consistent sets of cross-section measurements and for which the cross sections varied with energy as expected by theory. The overall average root-mean-square deviation between the measured and calculated cross sections was 10.9% and the overall average deviation was −2.5%. This degree of agreement between measured and calculated ionization and x-ray production cross sections was considered to be very satisfactory given the difficulties of these measurements.

76 FR 20593 - Guidance Under Section 108(a) Concerning the Exclusion of Section 61(a)(12) Discharge of...

Science.gov (United States)

2011-04-13

... ultimate owner(s) of such partner. Some taxpayers have taken the position that the insolvency exception is... for partnerships under section 108(d)(6), the insolvency exception is available only to the extent the.... Section 1.108-9 is added to read as follows: Sec. 1.108-9 Application of insolvency and bankruptcy...

Progress report : Plasma Physics Section

International Nuclear Information System (INIS)

Iyyengar, S.K.; Rohatgi, V.K.

1975-08-01

The activities of the plasma physics section of the Bhabha Atomic Research Centre, India over the last five years (1970-75) are reported. The R and D programme of the section has been divided into four cells mainly i.e., (i) Thermal plasma (ii) Relativistic Electron Beam (iii) Energetics and (iv) Electron beam technology. The salient features of the development activities carried out in these cells are outlined. In the Thermal plasma group, considerable research work has been done in (a) fundamental plasma studies, (b) industrial plasma technology and (c) open cycle MHD power generation project. The relativistic electron beam group is engaged in improving the technology to realize high power lasers, and pulsed thermonuclear fusion. The energetics programme is oriented to develop high voltage d.c. generators and pulse generators. The electron beam techniques developed here are routinely used for melting refractory and reactive metals. The technical know-how of the welding machines developed has been transfered to industries. Equipment developed by this section, such as, (1) electron beam furnace, (2) plasma cutting torch, (3) impulse magnet charger etc. are listed. (A.K.)

Modelisation of the fission cross section

International Nuclear Information System (INIS)

Morariu, Claudia

2013-03-01

The neutron cross sections of four nuclear systems (n+ 235 U, n+ 233 U, n+ 241 Am and n+ 237 Np) are studied in the present document. The target nuclei of the first case, like 235 U and 239 Pu, have a large fission cross section after the absorption of thermal neutrons. These nuclei are called 'fissile' nuclei. The other type of nuclei, like 237 Np and 241 Am, fission mostly with fast neutrons, which exceed the fission threshold energy. These types of nuclei are called 'fertile'. The compound nuclei of the fertile nuclei have a binding energy higher than the fission barrier, while for the fissile nuclei the binding energy is lower than the fission barrier. In this work, the neutron induced cross sections for both types of nuclei are evaluated in the fast energy range. The total, reaction and shape-elastic cross sections are calculated by the coupled channel method of the optical model code ECIS, while the compound nucleus mechanism are treated by the statistical models implemented in the codes STATIS, GNASH and TALYS. The STATIS code includes a refined model of the fission process. Results from the theoretical calculations are compared with data retrieved from the experimental data base EXFOR. (author) [fr

Multilevel parametrization of fissile nuclei resonance cross sections

International Nuclear Information System (INIS)

Lukyanov, A.A.; Kolesov, V.V.; Janeva, N.

1987-01-01

Because the resonance interference has an important influence on the resonance structure of neutron cross sections energy dependence at lowest energies, multilevel scheme of the cross section parametrization which take into account the resonance interference is used for the description with the same provisions in the regions of the interferential maximum and minimum of the resonance cross sections of the fissile nuclei

NNLO jet cross sections by subtraction

Energy Technology Data Exchange (ETDEWEB)

Somogyi, G.; Bolzoni, P. [DESY, Platanenallee 6, D-15738 Zeuthen (Germany); Trocsanyi, Z. [CERN PH-TH, on leave from University of Debrecen and Institute of Nuclear Research of HAS, H-4001 P.O.Box 51 (Hungary)

2010-08-15

We report on the computation of a class of integrals that appear when integrating the so-called iterated singly-unresolved approximate cross section of the NNLO subtraction scheme of Refs. [G. Somogyi, Z. Trocsanyi, and V. Del Duca, JHEP 06, 024 (2005), (arXiv:hep-ph/0502226); G. Somogyi and Z. Trocsanyi, (2006), (arXiv:hep-ph/0609041); G. Somogyi, Z. Trocsanyi, and V. Del Duca, JHEP 01, 070 (2007), (arXiv:hep-ph/0609042); G. Somogyi and Z. Trocsanyi, JHEP 01, 052 (2007), (arXiv:hep-ph/0609043)] over the factorised phase space of unresolved partons. The integrated approximate cross section itself can be written as the product of an insertion operator (in colour space) times the Born cross section. We give selected results for the insertion operator for processes with two and three hard partons in the final state.

NNLO jet cross sections by subtraction

International Nuclear Information System (INIS)

Somogyi, G.; Bolzoni, P.; Trocsanyi, Z.

2010-01-01

We report on the computation of a class of integrals that appear when integrating the so-called iterated singly-unresolved approximate cross section of the NNLO subtraction scheme of Refs. [G. Somogyi, Z. Trocsanyi, and V. Del Duca, JHEP 06, 024 (2005), (arXiv:hep-ph/0502226); G. Somogyi and Z. Trocsanyi, (2006), (arXiv:hep-ph/0609041); G. Somogyi, Z. Trocsanyi, and V. Del Duca, JHEP 01, 070 (2007), (arXiv:hep-ph/0609042); G. Somogyi and Z. Trocsanyi, JHEP 01, 052 (2007), (arXiv:hep-ph/0609043)] over the factorised phase space of unresolved partons. The integrated approximate cross section itself can be written as the product of an insertion operator (in colour space) times the Born cross section. We give selected results for the insertion operator for processes with two and three hard partons in the final state.

Maternal mortality following caesarean sections.

Science.gov (United States)

Sikdar, K; Kundu, S; Mandal, G S

1979-08-01

A study of 26 maternal deaths following 3647 caesarean sections was conducted in Eden Hospital from 1974-1977. During the time period there were 35,544 births and 308 total maternal deaths (8.74/1000). Indications for Caesarean sections included: 1) abnormal presentation; 2) cephalopelvic disproportion; 3) toxemia; 4) prolonged labor; 5) fetal distress; and 6) post-caesarean pregnancies. Highest mortality rates were among cephalopelvic disproportion, toxemia, and prolonged labor patients. 38.4% of the patients died due to septicaemia and peritonitis, but other deaths were due to preclampsia, shock, and hemorrhage. Proper antenatal care may have prevented anemia and preclampsia and treated other pre-existing or superimposed diseases.

Tables of RCN-2 fission-product cross section evaluation

International Nuclear Information System (INIS)

Gruppelaar, H.

1979-05-01

This report (continuation of ECN-13 and ECN-33) describes the third part of the RCN-2 evaluation of neutron cross sections for fission product nuclides in KEDAK format. It contains evaluated data for nine nuclides, i.e. 142 Nd, 143 Nd, 144 Nd, 145 Nd, 146 Nd, 147 Nd, 148 Nd, 150 Nd and 147 Pm. Most emphasis has been given to the evaluation of the radiative capture cross section, in order to provide a data base for adjustment calculations using results of integral measurements. Short evaluation reports are given for this cross section. The evaluated capture cross sections are compared with recent experimental differential and integral data. Graphs are given of the capture cross sections at neutron energies above 1 keV, in which also adjusted point cross sections, based upon integral STEK and CFRMF data have been plotted. Moreover, the results are compared with those of the well-known ENDF/B-IV evaluation for fission product nucleides. Finally, evaluation summaries are given, which include tables of other important neutron cross sections, such as the total, elastic scattering and inelastic scattering cross sections

Pion-nucleus cross sections

International Nuclear Information System (INIS)

Barashenkov, V.S.

1990-01-01

The tables of inelastic and total cross sections of π ± mesons interactions with nuclei 4 He- 238 U are presented. The tables are obtained by theoretical analysis of known experimental data for energies higher some tens of MeV. 1 ref.; 1 tab

Positive Scattering Cross Sections using Constrained Least Squares

International Nuclear Information System (INIS)

Dahl, J.A.; Ganapol, B.D.; Morel, J.E.

1999-01-01

A method which creates a positive Legendre expansion from truncated Legendre cross section libraries is presented. The cross section moments of order two and greater are modified by a constrained least squares algorithm, subject to the constraints that the zeroth and first moments remain constant, and that the standard discrete ordinate scattering matrix is positive. A method using the maximum entropy representation of the cross section which reduces the error of these modified moments is also presented. These methods are implemented in PARTISN, and numerical results from a transport calculation using highly anisotropic scattering cross sections with the exponential discontinuous spatial scheme is presented

Environmental Impact Section

International Nuclear Information System (INIS)

Anon.

1977-01-01

The Section is concerned with preparation of environmental statements and assessments and development of assessment methodologies for energy technologies. During 1976, activities involved nuclear, fossil, and geothermal energy; this work was supported by the U.S.Army, HUD, US ERDA, and US NRC. Two special studies--one on the effects of power plant intake structures on fish impingement and another on multiple uses of cooling lakes--were completed and should serve as references for future analyses. Two research projects sponsored by NRC--the Unified Transport Approach (UTA) to Power Plant Assessment and the Environmental Monitoring Data Evaluation Study--were continued. The purpose of the UA program is to develop fast-transient, one- and two-dimensional transport models for estimating thermal, radiological, chemical, and biological impacts in complicated water bodies. The impact of public use of various products that contain radioactive isotope is being evaluated. The Environmental Impact Sections assistance to NRC expanded to include assessments of fuel-fabrication facilities being considered for relicensing and two uranium in-situ solution mining facility proposals. The work for HUD comprises an assessment of the first application of MIUS in a new town development. A generic environmental statement was prepared and an environmental monitoring program for the facility was designed

Calculation of atom displacement cross section for structure material

International Nuclear Information System (INIS)

Liu Ping; Xu Yiping

2015-01-01

The neutron radiation damage in material is an important consideration of the reactor design. The radiation damage of materials mainly comes from atom displacements of crystal structure materials. The reaction cross sections of charged particles, cross sections of displacements per atom (DPA) and KERMA are the basis of radiation damage calculation. In order to study the differences of DPA cross sections with different codes and different evaluated nuclear data libraries, the DPA cross sections for structure materials were calculated with UNF and NJOY codes, and the comparisons of results were given. The DPA cross sections from different evaluated nuclear data libraries were compared. And the comparison of DPA cross sections between NJOY and Monte Carlo codes was also done. The results show that the differences among these evaluated nuclear data libraries exist. (authors)

Tachyonic ionization cross sections of hydrogenic systems

Energy Technology Data Exchange (ETDEWEB)

Tomaschitz, Roman [Department of Physics, Hiroshima University, 1-3-1 Kagami-yama, Higashi-Hiroshima 739-8526 (Japan)

2005-03-11

Transition rates for induced and spontaneous tachyon radiation in hydrogenic systems as well as the transversal and longitudinal ionization cross sections are derived. We investigate the interaction of the superluminal radiation field with matter in atomic bound-bound and bound-free transitions. Estimates are given for Ly-{alpha} transitions effected by superluminal quanta in hydrogen-like ions. The tachyonic photoelectric effect is scrutinized, in the Born approximation and at the ionization threshold. The angular maxima occur at different scattering angles in the transversal and longitudinal cross sections, which can be used to sift out longitudinal tachyonic quanta in a photon flux. We calculate the tachyonic ionization and recombination cross sections for Rydberg states and study their asymptotic scaling with respect to the principal quantum number. At the ionization threshold of highly excited states of order n {approx} 10{sup 4}, the longitudinal cross section starts to compete with photoionization, in recombination even at lower levels.

Symmetric charge transfer cross section of uranium

International Nuclear Information System (INIS)

Shibata, Takemasa; Ogura, Koichi

1995-03-01

Symmetric charge transfer cross section of uranium was calculated under consideration of reaction paths. In the charge transfer reaction a d 3/2 electron in the U atom transfers into the d-electron site of U + ( 4 I 9/2 ) ion. The J value of the U atom produced after the reaction is 6, 5, 4 or 3, at impact energy below several tens eV, only resonant charge transfer in which the product atom is ground state (J=6) takes place. Therefore, the cross section is very small (4-5 x 10 -15 cm 2 ) compared with that considered so far. In the energy range of 100-1000eV the cross section increases with the impact energy because near resonant charge transfer in which an s-electron in the U atom transfers into the d-electron site of U + ion. Charge transfer cross section between U + in the first excited state (289 cm -1 ) and U in the ground state was also obtained. (author)

Fast optically sectioned fluorescence HiLo endomicroscopy

Science.gov (United States)

Ford, Tim N.; Lim, Daryl; Mertz, Jerome

2012-02-01

We describe a nonscanning, fiber bundle endomicroscope that performs optically sectioned fluorescence imaging with fast frame rates and real-time processing. Our sectioning technique is based on HiLo imaging, wherein two widefield images are acquired under uniform and structured illumination and numerically processed to reject out-of-focus background. This work is an improvement upon an earlier demonstration of widefield optical sectioning through a flexible fiber bundle. The improved device features lateral and axial resolutions of 2.6 and 17 μm, respectively, a net frame rate of 9.5 Hz obtained by real-time image processing with a graphics processing unit (GPU) and significantly reduced motion artifacts obtained by the use of a double-shutter camera. We demonstrate the performance of our system with optically sectioned images and videos of a fluorescently labeled chorioallantoic membrane (CAM) in the developing G. gallus embryo. HiLo endomicroscopy is a candidate technique for low-cost, high-speed clinical optical biopsies.

29 CFR 451.4 - Labor organizations under section 3(j).

Science.gov (United States)

2010-07-01

... 29 Labor 2 2010-07-01 2010-07-01 false Labor organizations under section 3(j). 451.4 Section 451.4... 1959 § 451.4 Labor organizations under section 3(j). (a) General. Section 3(j) sets forth five... one of these categories listed in section 3(j) is subject to the requirements of the Act. (b...

Prevalence of urinary incontinence and pelvic floor muscle dysfunction in primiparae two years after cesarean section: cross-sectional study.

Science.gov (United States)

Barbosa, Angélica Mércia Pascon; Marini, Gabriela; Piculo, Fernanda; Rudge, Cibele Vieira Cunha; Calderon, Iracema Mattos Paranhos; Rudge, Marilza Vieira Cunha

2013-01-01

There is uncertainty in the literature regarding the theory that obstetric events and pelvic floor injuries give rise to lower risk of subsequent urinary incontinence among women delivering via cesarean section than among women delivering vaginally. The objective of this study was to assess the two-year postpartum prevalence of urinary incontinence and pelvic floor muscle dysfunction and the factors responsible for them. Cross-sectional study, conducted in a public university. 220 women who had undergone elective cesarean section or vaginal childbirth two years earlier were selected. Their urinary incontinence symptoms were investigated, and their pelvic floor muscle dysfunction was assessed using digital palpation and a perineometer. The two-year urinary incontinence prevalences following vaginal childbirth and cesarean section were 17% and 18.9%, respectively. The only risk factor for pelvic floor muscle dysfunction was weight gain during pregnancy. Body mass index less than 25 kg/m 2 and normal pelvic floor muscle function protected against urinary incontinence. Gestational urinary incontinence increased the risk of two-year postpartum urinary incontinence. Gestational urinary incontinence was a crucial precursor of postpartum urinary incontinence. Weight gain during pregnancy increased the subsequent risk of pelvic floor muscle dysfunction, and elective cesarean section did not prevent urinary incontinence.

Prevalence of urinary incontinence and pelvic floor muscle dysfunction in primiparae two years after cesarean section: cross-sectional study

Directory of Open Access Journals (Sweden)

Angélica Mércia Pascon Barbosa

Full Text Available CONTEXT AND OBJECTIVE There is uncertainty in the literature regarding the theory that obstetric events and pelvic floor injuries give rise to lower risk of subsequent urinary incontinence among women delivering via cesarean section than among women delivering vaginally. The objective of this study was to assess the two-year postpartum prevalence of urinary incontinence and pelvic floor muscle dysfunction and the factors responsible for them. DESIGN AND SETTING Cross-sectional study, conducted in a public university. METHODS 220 women who had undergone elective cesarean section or vaginal childbirth two years earlier were selected. Their urinary incontinence symptoms were investigated, and their pelvic floor muscle dysfunction was assessed using digital palpation and a perineometer. RESULTS The two-year urinary incontinence prevalences following vaginal childbirth and cesarean section were 17% and 18.9%, respectively. The only risk factor for pelvic floor muscle dysfunction was weight gain during pregnancy. Body mass index less than 25 kg/m 2 and normal pelvic floor muscle function protected against urinary incontinence. Gestational urinary incontinence increased the risk of two-year postpartum urinary incontinence. CONCLUSION Gestational urinary incontinence was a crucial precursor of postpartum urinary incontinence. Weight gain during pregnancy increased the subsequent risk of pelvic floor muscle dysfunction, and elective cesarean section did not prevent urinary incontinence.

The MMPI-2 Restructured Form Personality Psychopathology Five Scales: bridging DSM-5 Section 2 personality disorders and DSM-5 Section 3 personality trait dimensions.

Science.gov (United States)

Finn, Jacob A; Arbisi, Paul A; Erbes, Christopher R; Polusny, Melissa A; Thuras, Paul

2014-01-01

This study examined in a college sample and a sample of non-treatment-seeking, trauma-exposed veterans the association between the MMPI-2 Restructured Form (MMPI-2-RF) Personality Psychopathology Five (PSY-5) Scales and DSM-5 Section 2 personality disorder (PD) criteria, the same system used in DSM-IV-TR, and the proposed broad personality trait dimensions contained in Section 3 of DSM-5. DSM-5 Section 2 PD symptoms were assessed using the SCID-II-PQ, and applying a replicated rational selection procedure to the SCID-II-PQ item pool, proxies for the DSM-5 Section 3 dimensions and select facets were constructed. The MMPI-2-RF PSY-5 scales demonstrated appropriate convergent and discriminant associations with both Section 2 PDs and Section 3 dimensions in both samples. These findings suggest the MMPI-2-RF PSY-5 scales can serve both conceptually and practically as a bridge between the DSM-5 Section 2 PD criteria and the DSM-5 Section 3 personality features.

First measurement of the Rayleigh cross section

NARCIS (Netherlands)

Naus, H.; Ubachs, W.

2000-01-01

Rayleigh cross section for N2, Ar and SF6 was performed using the technique of cavity ring-down spectroscopy (CRDS). The experiment was based on the assumption that scattering cross section is equal to the extinction in the absence of absorption. The theory explains the molecular origin of

Total and ionization cross sections of electron scattering by fluorocarbons

International Nuclear Information System (INIS)

Antony, B K; Joshipura, K N; Mason, N J

2005-01-01

Electron impact total cross sections (50-2000 eV) and total ionization cross sections (threshold to 2000 eV) are calculated for typical plasma etching molecules CF 4 , C 2 F 4 , C 2 F 6 , C 3 F 8 and CF 3 I and the CF x (x 1-3) radicals. The total elastic and inelastic cross sections are determined in the spherical complex potential formalism. The sum of the two gives the total cross section and the total inelastic cross section is used to calculate the total ionization cross sections. The present total and ionization cross sections are found to be consistent with other theories and experimental measurements, where they exist. Our total cross section results for CF x (x = 1-3) radicals presented here are first estimates on these species

Measurement cross sections for radioisotopes production

International Nuclear Information System (INIS)

Garrido, E.

2011-01-01

New radioactive isotopes for nuclear medicine can be produced using particle accelerators. This is one goal of Arronax, a high energy - 70 MeV - high intensity - 2*350 μA - cyclotron set up in Nantes. A priority list was established containing β - - 47 Sc, 67 Cu - β + - 44 Sc, 64 Cu, 82 Sr/ 82 Rb, 68 Ge/ 68 Ga - and α emitters - 211 At. Among these radioisotopes, the Scandium 47 and the Copper 67 have a strong interest in targeted therapy. The optimization of their productions required a good knowledge of their cross-sections but also of all the contaminants created during irradiation. We launched on Arronax a program to measure these production cross-sections using the Stacked-Foils' technique. It consists in irradiating several groups of foils - target, monitor and degrader foils - and in measuring the produced isotopes by γ-spectrometry. The monitor - nat Cu or nat Ni - is used to correct beam loss whereas degrader foils are used to lower beam energy. We chose to study the nat Ti(p,X) 47 Sc and 68 Zn(p,2p) 67 Cu reactions. Targets are respectively natural Titanium foil - bought from Goodfellow - and enriched Zinc 68 deposited on Silver. In the latter case, Zn targets were prepared in-house - electroplating of 68 Zn - and a chemical separation between Copper and Gallium isotopes has to be made before γ counting. Cross-section values for more than 40 different reactions cross-sections have been obtained from 18 MeV to 68 MeV. A comparison with the Talys code is systematically done. Several parameters of theoretical models have been studied and we found that is not possible to reproduce faithfully all the cross-sections with a given set of parameters. (author)

FENDL/E. Evaluated nuclear data library of neutron nuclear interaction cross-sections and photon production cross-sections and photon-atom interaction cross sections for fusion applications. Version 1.1 of November 1994

International Nuclear Information System (INIS)

Pashchenko, A.B.; Wienke, H.; Ganesan, S.; McLaughlin, P.K.

1996-01-01

This document presents the description of a physical tape containing the basic evaluated nuclear data library of neutron nuclear interaction cross-sections and photon production cross-sections and photon-atom interaction cross-sections for fusion applications. It is part of FENDL, the evaluated nuclear data library for fusion applications. The nuclear data are available cost-free for distribution to interested scientists upon request. The data can also be retrieved by the user via online access through international computer networks. (author). 11 refs, 1 tab

Reactor-vessel-sectioning demonstration

International Nuclear Information System (INIS)

Lundgren, R.A.

1981-07-01

A successful technical demonstration of simulated reactor vessel sectioning was completed using the combined techniques of air arc gouging and flame cutting. A 4-ft x 3-ft x 9-in. thick sample was fabricated of A36 carbon steel to simulate a reactor vessel wall. A 1/4-in layer of stainless steel (SS) was tungsten inert gas (TIG)-welded to the carbon steel. Several techniques were considered to section the simulated reactor vessel: an air arc gouger was chosen to penetrate the stainless steel, and flame cutting was selected to sever the carbon steel. After the simulated vessel was successfully cut from the SS side, another cut was made, starting from the carbon steel side. This cut was also successful. Cutting from the carbon steel side has the advantages of cost reduction since the air arc gouging step is eliminated and contamination controlled because the molten metal is blown inward

Cross sections for hadron and lepton production processes

International Nuclear Information System (INIS)

Bhattacharya, R.

1976-01-01

Charged heavy lepton production in proton-proton collisions is studied. Motivated by recent experimental results from the Stanford Linear Accelerator Center a parton model analysis is given of the reaction p + p → L + + L - + x → μ +- + e/ -+ / + neutrinos + x. Results are presented for the total cross section and the differential cross sections with respect to the invariant mass squared of the final charged leptons and the transverse momenta of each one of them. The two-photon mechanism for pair production in colliding beam exeriments is considered. Through the use of mapped invariant integration variables, a reliable exact numerical calculation of the cross section for the production of muon and pion pairs by the two-photon mechanism is provided. Results are given for the exact total cross sections and also the differential cross sections with respect to the invariant mass squared of the pair. These are compared to the results obtained from the equivalent photon approximation method

An overview and recent changes in Section I

International Nuclear Information System (INIS)

Bernstein, M.D.

1995-01-01

Power Boilers, Section 1 of the ASME B and PV Code, is the first and oldest of the Code sections, originally published in 1915. Eighty years later Section 1 is well established, and changes are typically incremental rather than dramatic. Before reviewing some of these recent changes, it is useful to provide an overview of Section 1 rules, which were originally, and are still today, standard rules for the construction of steam boilers. Changes of the last few years affect the following portions of Section 1: The Foreword; PG-39 rules regarding small nozzles which can be attached without postweld heat treatment; rules of PG-67 and PG-70 regarding safety valve relieving capacity; PW-28 rules covering weld procedure qualification for certain nonpressure parts; PW-39 rules for postweld heat treatment; a major revision to the PW-43 rules for calculating loads permitted on structural attachments to tube walls; and some ongoing revisions to the Manufacturer's Data Report Forms

Microscopic cross-section measurements by thermal neutron activation

International Nuclear Information System (INIS)

Avila L, J.

1987-08-01

Microscopic cross sections measured by thermal neutron activation using RP-0 reactor at the Peruvian Nuclear Energy Institute. The method consists in measuring microscopic cross section ratios through activated samples, requiring being corrected in thermal and epithermal energetic range by Westcott formalism. Furthermore, the comptage ratios measured for each photopeak to its decay fraction should be normalized from interrelation between both processes above, activation microscopic cross sections are obtained

Distorted eikonal cross sections: A time-dependent view

International Nuclear Information System (INIS)

Turner, R.E.

1982-01-01

For Hamiltonians with two potentials, differential cross sections are written as time-correlation functions of reference and distorted transition operators. Distorted eikonal differential cross sections are defined in terms of straight-line and reference classical trajectories. Both elastic and inelastic results are obtained. Expressions for the inelastic cross sections are presented in terms of time-ordered cosine and sine memory functions through the use of the Zwanzig-Feshbach projection-operator method

Discussion of electron cross sections for transport calculations

International Nuclear Information System (INIS)

Berger, M.J.

1983-01-01

This paper deals with selected aspects of the cross sections needed as input for transport calculations and for the modeling of radiation effects in biological materials. Attention is centered mainly on the cross sections for inelastic interactions between electrons and water molecules and the use of these cross sections for the calculation of energy degradation spectra and of ionization and excitation yields. 40 references, 3 figures, 1 table

Diversity and distribution patterns of root-associated fungi on herbaceous plants in alpine meadows of southwestern China.

Science.gov (United States)

Gao, Qian; Yang, Zhu L

2016-01-01

The diversity of root-associated fungi associated with four ectomycorrhizal herbaceous species, Kobresia capillifolia, Carex parva, Polygonum macrophyllum and Potentilla fallens, collected in three sites of alpine meadows in southwestern China, was estimated based on internal transcribed spacer (ITS) rDNA sequence analysis of root tips. Three hundred seventy-seven fungal sequences sorted to 154 operational taxonomical units (sequence similarity of ≥ 97% across the ITS) were obtained from the four plant species across all three sites. Similar taxa (in GenBank with ≥ 97% similarity) were not found in GenBank and/or UNITE for most of the OTUs. Ectomycorrhiz a made up 64% of the fungi operational taxonomic units (OTUs), endophytes constituted 4% and the other 33% were unidentified root-associated fungi. Fungal OTUs were represented by 57% basidiomycetes and 43% ascomycetes. Inocybe, Tomentella/Thelophora, Sebacina, Hebeloma, Pezizomycotina, Cenococcum geophilum complex, Cortinarius, Lactarius and Helotiales were OTU-rich fungal lineages. Across the sites and host species the root-associated fungal communities generally exhibited low host and site specificity but high host and sampling site preference. Collectively our study revealed noteworthy diversity and endemism of root-associated fungi of alpine plants in this global biodiversity hotspot. © 2016 by The Mycological Society of America.

Hardon cross sections at ultra high energies

International Nuclear Information System (INIS)

Yodh, G.B.

1987-01-01

A review of results on total hadronic cross sections at ultra high energies obtained from a study of longitudinal development of cosmic ray air showers is given. The experimental observations show that proton-air inelastic cross section increases from 275 mb to over 500 mb as the collision energy in the center of mass increases from 20 GeV to 20 TeV. The proton-air inelastic cross section, obtained from cosmic ray data at √s = 30 TeV, is compared with calculations using various different models for the energy variation of the parameters of the elementary proton-proton interaction. Three conclusions are derived

[Caesarean section and anal incontinence].

Science.gov (United States)

Kalis, V; Stipán, J; Chaloupka, P; Karbanová, J; Rokyta, Z

2008-04-01

Summary of the impact of Caesarean section on anal incontinence. Review. Department of Gynaecology and Obstetrics, Charles University and University Hospital Plzen. Review of the current international literature. Currently, Caesarean section is not considered to reduce symptoms of anal incontinence. If there is any reduction of symptoms, that remains only for a short term (40% in 3 months after the delivery in the largest trial). In a long term, virtually in no trial has been observed any difference, and others, non-obstetrical factors (particularly aging) prevail. Current knowledge does not allow to assess sufficiently pros and cons of Caesarean compared to vaginal delivery. High risk groups, that would profit from elective Ceasarean, have not been clearly identified yet.

Total cross section results for deuterium electrodisintegration

International Nuclear Information System (INIS)

Skopik, D.M.; Murphy, J.J. II; Shin, Y.M.

1976-01-01

Theoretical total cross sections for deuterium electrodisintegration are presented as a function of incident electron energy. The cross section has been calculated using virtual photon theory with Partovi's photodisintegration calculation for E/subx/ > 10 MeV and effective range theory for E/subx/ 2 H(e, n) reaction in Tokamak reactors

Preparation of next generation set of group cross sections. 3

International Nuclear Information System (INIS)

Kaneko, Kunio

2002-03-01

This fiscal year, based on the examination result about the evaluation energy range of heavy element unresolved resonance cross sections, the upper energy limit of the energy range, where ultra-fine group cross sections are produced, was raised to 50 keV, and an improvement of the group cross section processing system was promoted. At the same time, reflecting the result of studies carried out till now, a function producing delayed neutron data was added to the general-purpose group cross section processing system , thus the preparation of general purpose group cross section processing system has been completed. On the other hand, the energy structure, data constitution and data contents of next generation group cross section set were determined, and the specification of a 151 groups next generation group cross section set was defined. Based on the above specification, a concrete library format of the next generation cross section set has been determined. After having carried out the above-described work, using the general-purpose group cross section processing system , which was complete in this study, with use of the JENDL-3. 2 evaluated nuclear data, the 151 groups next generation group cross section of 92 nuclides and the ultra fine group resonance cross section library for 29 nuclides have been prepared. Utilizing the 151 groups next generation group cross section set and the ultra-fine group resonance cross-section library, a bench mark test calculation of fast reactors has been performed by using an advanced lattice calculation code. It was confirmed, by comparing the calculation result with a calculation result of continuous energy Monte Carlo code, that the 151 groups next generation cross section set has sufficient accuracy. (author)

Section XI -- 25 years of development

International Nuclear Information System (INIS)

Hedden, O.F.

1996-01-01

The original concept of nuclear power plant designers was that the higher standards of design and fabrication would make inservice inspections unnecessary, and little attention was given to provisions for access. By 1966 the Atomic Energy Commission recognized that a planned program of periodic inservice inspections would be needed. They began development of criteria, and encouraged industry code-writing organizations to do likewise. These groups joined forces in 1968, and their product was published by ASME in 1970 as part of the Boiler and Pressure Code, Section XI, Rules for Inservice Inspection of Nuclear Reactor Coolant Systems. Section XI, 24 pages in 1970, is now 723 pages. While it originally covered only light water reactor Class 1 components and piping, it now includes Class 2, 3, and containment, and liquid metal cooled reactor plants. Along the way, rules have been developed for gas-cooled and low pressure heavy water reactor plants. The growth in size of Section XI from its modest beginning has been largely because of recognition that the rules governing plant inspection/operation need to be considerably different from the rules provided for the component designer/manufacturer. Rules have been developed in the areas of repair/replacement technology, NDE methodology, NDE acceptance standards, and analytical evaluation methods in the absence of appropriate rules in Section III

Thin-section CT of Cushing's disease

International Nuclear Information System (INIS)

Takahashi, Tatsuo; Kuwayama, Akio; Katoh, Tetsuo; Ichihara, Kaoru; Kageyama, Naoki; Nakamura, Koji.

1983-01-01

Using 1.5 mm contiguous sections with a GE CT/T 8800 scanner, we investigated the sellar regions of 22 cases of Cushing's diseases which had been diagnosed endocrinologically. Each sellar turcica was normal in size, and in only 5 cases were there significant findings on 2 mm-thick sellar-floor polytomography. Nine tumors appeared as regions of a hypodense area, and three tumors were diagnosed by indirect signs, for example, stalk deviation and diaphragmatic plane asymmetry. The other 10 cases, especially those previously operated on or irradiated, were diagnosed as falsely positive or negative. Because it is best of the microadenomas appear hypodense within the strongly contrast-enhanced anterior pituitary glands, it is better for scans to be obtained immediately after rapid intravenous contrast infusion. Hypodense areas of microadenomas are best demonstrated on direct coronal scans or reversed scans of 1.5 mm-thickness thin-slice sections. By these methods, microadenomas, if they are over 5-6 mm in diameter, can appear as hypodense. Sellar floor findings by means of thin-section CT were more sensitive than those of polytomography and had more advantages in local diagnosis. If the tumor were over 4 mm in diameter, local changes in the sellar floor could be demonstrated by thin-section CT, but by polytomography no changes in the sellar floor could be demonstrated until the tumor size reached 6 mm. (author)

Practicable methods for histological section thickness measurement in quantitative stereological analyses.

Science.gov (United States)

Matenaers, Cyrill; Popper, Bastian; Rieger, Alexandra; Wanke, Rüdiger; Blutke, Andreas

2018-01-01

The accuracy of quantitative stereological analysis tools such as the (physical) disector method substantially depends on the precise determination of the thickness of the analyzed histological sections. One conventional method for measurement of histological section thickness is to re-embed the section of interest vertically to its original section plane. The section thickness is then measured in a subsequently prepared histological section of this orthogonally re-embedded sample. However, the orthogonal re-embedding (ORE) technique is quite work- and time-intensive and may produce inaccurate section thickness measurement values due to unintentional slightly oblique (non-orthogonal) positioning of the re-embedded sample-section. Here, an improved ORE method is presented, allowing for determination of the factual section plane angle of the re-embedded section, and correction of measured section thickness values for oblique (non-orthogonal) sectioning. For this, the analyzed section is mounted flat on a foil of known thickness (calibration foil) and both the section and the calibration foil are then vertically (re-)embedded. The section angle of the re-embedded section is then calculated from the deviation of the measured section thickness of the calibration foil and its factual thickness, using basic geometry. To find a practicable, fast, and accurate alternative to ORE, the suitability of spectral reflectance (SR) measurement for determination of plastic section thicknesses was evaluated. Using a commercially available optical reflectometer (F20, Filmetrics®, USA), the thicknesses of 0.5 μm thick semi-thin Epon (glycid ether)-sections and of 1-3 μm thick plastic sections (glycolmethacrylate/ methylmethacrylate, GMA/MMA), as regularly used in physical disector analyses, could precisely be measured within few seconds. Compared to the measured section thicknesses determined by ORE, SR measures displayed less than 1% deviation. Our results prove the applicability

Section 60 revisited (The Ontario Electrical Safety Code)

Energy Technology Data Exchange (ETDEWEB)

Olechna, T.

2003-06-01

Recent changes to the Ontario Electrical Safety Code (OESC), specifically the deletion of Section 60, Electrical Communication Systems, are discussed in an effort to explain the history behind the decision and the time frame of the changes. Communication systems include telephone, telegraph, data communications, intercommunications, wired music and paging systems. In brief, the deletion of Section 60 occurred in 1983, and resulted from the fact that communication-type wiring was historically the property of the communications utility and under federal jurisdiction. Since such equipment was under federal jurisdiction, they were not inspected in Ontario, hence the deletion of Section 60 from the Ontario Code. It should be noted that although Section 60 is deleted, a number of rules applicable to communications circuits are spread throughout various sections of the Code, notably in Rule 1-032 dealing with damage and interference, Rule 4-022 involving harmonics issues, Rule 12-904(2) regulates the use of conductors that are of different sources of voltage, and Rule 10-708 which specifies the spacing and bonding requirements for communications systems. The end result is that even though Section 60 was deleted, there are these and other rules in the OESC that have direct impact on communications circuits and in effect help to protect the integrity of the system.

Electron-impact ionization cross section of rubidium

International Nuclear Information System (INIS)

Kim, Y.; Migdalek, J.; Siegel, W.; Bieron, J.

1998-01-01

A theoretical model for electron-impact ionization cross section has been applied to Rb and the theoretical cross section (from the threshold to 1 keV in incident energy) is in good agreement with the recent experimental data obtained using Rb atoms trapped in a magneto-optical trap. The theoretical model, called the binary-encounter endash dipole (BED) model, combines a modified Mott cross section with the high-energy behavior of Born cross sections. To obtain the continuum dipole oscillator strength df/dE of the 5s electron required in the BED model, we used Dirac-Fock continuum wave functions with a core polarization potential that reproduced the known position of the Cooper minimum in the photoionization cross section. For inner-shell ionization, we used a simpler version of df/dE, which retained the hydrogenic shape. The contributions of the 4p→4d, 5s, and 5p autoionizing excitations were estimated using the plane-wave Born approximation. As a by-product, we also present the dipole oscillator strengths for the 5s→np 1/2 and 5s→np 3/2 transitions for high principal quantum numbers n near the ionization threshold obtained from the Dirac-Fock wave functions with the same core polarization potential as that used for the continuum wave functions. copyright 1998 The American Physical Society

Prolonged labour as indication for emergency caesarean section

DEFF Research Database (Denmark)

Maaløe, Nanna; Sorensen, B L; Onesmo, R

2012-01-01

To audit the quality of obstetric management preceding emergency caesarean sections for prolonged labour.......To audit the quality of obstetric management preceding emergency caesarean sections for prolonged labour....

Developing Scientific Reasoning Through Drawing Cross-Sections

Science.gov (United States)

Hannula, K. A.

2012-12-01

Cross-sections and 3D models of subsurface geology are typically based on incomplete information (whether surface geologic mapping, well logs, or geophysical data). Creating and evaluating those models requires spatial and quantitative thinking skills (including penetrative thinking, understanding of horizontality, mental rotation and animation, and scaling). However, evaluating the reasonableness of a cross-section or 3D structural model also requires consideration of multiple possible geometries and geologic histories. Teaching students to create good models requires application of the scientific methods of the geosciences (such as evaluation of multiple hypotheses and combining evidence from multiple techniques). Teaching these critical thinking skills, especially combined with teaching spatial thinking skills, is challenging. My Structural Geology and Advanced Structural Geology courses have taken two different approaches to developing both the abilities to visualize and to test multiple models. In the final project in Structural Geology (a 3rd year course with a pre-requisite sophomore mapping course), students create a viable cross-section across part of the Wyoming thrust belt by hand, based on a published 1:62,500 geologic map. The cross-section must meet a number of geometric criteria (such as the template constraint), but is not required to balance. Each student tries many potential geometries while trying to find a viable solution. In most cases, the students don't visualize the implications of the geometries that they try, but have to draw them and then erase their work if it does not meet the criteria for validity. The Advanced Structural Geology course used Midland Valley's Move suite to test the cross-sections that they made in Structural Geology, mostly using the flexural slip unfolding algorithm and testing whether the resulting line lengths balanced. In both exercises, students seemed more confident in the quality of their cross-sections when the

Route 6, Section Pristina – Skopje

OpenAIRE

, F. Isufi; , N. Kelmendi; , F. Humolli; , S. Bulliqi

2016-01-01

Republic of Kosovo in the last 3-4 years has improved the road infrastructure, among others, by improving conditions for the needs of citizens of the country and by meeting the requirements of international organizations who are seeking with the right that the region of South-East to have the performance equivalent to EU standards. Section Pristina-Skopje of Route 6 represents one of the most important sections of this road going through important parts of the country and enabling direct link...

Surface tensor estimation from linear sections

DEFF Research Database (Denmark)

Kousholt, Astrid; Kiderlen, Markus; Hug, Daniel

From Crofton's formula for Minkowski tensors we derive stereological estimators of translation invariant surface tensors of convex bodies in the n-dimensional Euclidean space. The estimators are based on one-dimensional linear sections. In a design based setting we suggest three types of estimators....... These are based on isotropic uniform random lines, vertical sections, and non-isotropic random lines, respectively. Further, we derive estimators of the specific surface tensors associated with a stationary process of convex particles in the model based setting....

Surface tensor estimation from linear sections

DEFF Research Database (Denmark)

Kousholt, Astrid; Kiderlen, Markus; Hug, Daniel

2015-01-01

From Crofton’s formula for Minkowski tensors we derive stereological estimators of translation invariant surface tensors of convex bodies in the n-dimensional Euclidean space. The estimators are based on one-dimensional linear sections. In a design based setting we suggest three types of estimators....... These are based on isotropic uniform random lines, vertical sections, and non-isotropic random lines, respectively. Further, we derive estimators of the specific surface tensors associated with a stationary process of convex particles in the model based setting....

Optical Model and Cross Section Uncertainties

Energy Technology Data Exchange (ETDEWEB)

Herman,M.W.; Pigni, M.T.; Dietrich, F.S.; Oblozinsky, P.

2009-10-05

Distinct minima and maxima in the neutron total cross section uncertainties were observed in model calculations using spherical optical potential. We found this oscillating structure to be a general feature of quantum mechanical wave scattering. Specifically, we analyzed neutron interaction with 56Fe from 1 keV up to 65 MeV, and investigated physical origin of the minima.We discuss their potential importance for practical applications as well as the implications for the uncertainties in total and absorption cross sections.

Meeting cross-section requirements for nuclear-energy design

Energy Technology Data Exchange (ETDEWEB)

Weisbin, C.R.; de Saussure, G.; Santoro, R.T. (Oak Ridge National Lab., TN (USA)); Gilai, T. (Ben-Gurion Univ. of the Negev, Beersheba (Israel))

1982-01-01

Current requirements in cross-section data that are essential to nuclear-energy programmes are summarized and explained and some insight into how these data might be obtained is provided. The six sections of the paper describe: design parameters and target accuracies; data collection, evaluation and analysis; determination of high-accuracy differential nuclear data for technological applications; status of selected evaluated nuclear data; analysis of benchmark testing; identification of important cross sections and inferred needs.

7 CFR 27.9 - Marketing Services Offices; Grading Section.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Marketing Services Offices; Grading Section. 27.9 Section 27.9 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE....9 Marketing Services Offices; Grading Section. Marketing Services Offices shall be maintained at...

Average cross sections for the 252Cf neutron spectrum

International Nuclear Information System (INIS)

Dezso, Z.; Csikai, J.

1977-01-01

A number of average cross sections have been measured for 252 Cf neutrons in (n, γ), (n,p), (n,2n), (n,α) reactions by the activation method and for fission by fission chamber. Cross sections have been determined for 19 elements and 45 reactions. The (n,γ) cross section values lie in the interval from 0.3 to 200 mb. The data as a function of target neutron number increases up to about N=60 with minimum near to dosed shells. The values lie between 0.3 mb and 113 mb. These cross sections decrease significantly with increasing the threshold energy. The values are below 20 mb. The data do not exceed 10 mb. Average (n,p) cross sections as a function of the threshold energy and average fission cross sections as a function of Zsup(4/3)/A are shown. The results obtained are summarized in tables

Torsion of the bar of the round transverse section from the variable on length and the transverse section porosity

Directory of Open Access Journals (Sweden)

Shlyakhov S.M.

2017-06-01

Full Text Available The present article is devoted to the task of finding of level of the secondary tangent voltages arising in sections because of a variable on porosity length. The decision of such task will allow to consider secondary tangent voltages in case of determination of bearing capacity of a porous bar. Distribution of porosity on a transverse section is set rationally - pro-ceeding from early the solved tasks on selection of porosity in case of torsion of a bar of a round transverse section, on bar length – under the linear law. A research objective is to determine the level of secondary tangent voltages and to evaluate from value.

MXS cross-section preprocessor user's manual

International Nuclear Information System (INIS)

Parker, F.; Ishikawa, M.; Luck, L.

1987-03-01

The MXS preprocessor has been designed to reduce the execution time of programs using isotopic cross-section data and to both reduce the execution time and improve the accuracy of shielding-factor interpolation in the SIMMER-II accident analysis program. MXS is a dual-purpose preprocessing code to: (1) mix isotopes into materials and (2) fit analytic functions to the shelf-shielding data. The program uses the isotope microscopic neutron cross-section data from the CCCC standard interface file ISOTXS and the isotope Bondarenko self-shielding data from the CCCC standard interface file BRKOXS to generate cross-section and self-shielding data for materials. The materials may be a mixture of several isotopes. The self-shielding data for the materials may be the actual shielding factors or a set of coefficients for functions representing the background dependence of the shielding factors. A set of additional data is given to describe the functions necessary to interpolate the shielding factors over temperature

Youssef’s Syndrome following Cesarean Section

Directory of Open Access Journals (Sweden)

Ozer Birge

2015-01-01

Full Text Available Youssef’s syndrome is characterized by cyclic hematuria (menouria, absence of vaginal bleeding (amenorrhea, and urinary incontinence due to vesicouterine fistula (VUF, the least common of the urogynecological fistulas. Youssef’s syndrome has a variable clinical presentation. A vesicouterine fistula is an abnormal pathway between the bladder and the uterus. The most common cause is lower segment Cesarean section. Conservative treatment may be appropriate in some cases, but surgery is the definitive treatment. Vesicouterine fistula should be suspected in cases presenting with urinary incontinence even years after Cesarean section. Diagnostic tests as well as necessary appropriate surgery should be performed on cases with suspected vesicouterine fistula. We present a 40-year-old multiparous woman with vesicouterine fistula after primary Cesarean section; she presented with urinary incontinence, hematuria, and amenorrhea 1 year after the birth. Here, we discuss our case with the help of previously published studies found in the literature.

Neutron capture cross sections of Kr

Directory of Open Access Journals (Sweden)

Fiebiger Stefan

2017-01-01

Full Text Available Neutron capture and β− -decay are competing branches of the s-process nucleosynthesis path at 85Kr [1], which makes it an important branching point. The knowledge of its neutron capture cross section is therefore essential to constrain stellar models of nucleosynthesis. Despite its importance for different fields, no direct measurement of the cross section of 85Kr in the keV-regime has been performed. The currently reported uncertainties are still in the order of 50% [2, 3]. Neutron capture cross section measurements on a 4% enriched 85Kr gas enclosed in a stainless steel cylinder were performed at Los Alamos National Laboratory (LANL using the Detector for Advanced Neutron Capture Experiments (DANCE. 85Kr is radioactive isotope with a half life of 10.8 years. As this was a low-enrichment sample, the main contaminants, the stable krypton isotopes 83Kr and 86Kr, were also investigated. The material was highly enriched and contained in pressurized stainless steel spheres.

NNLO jet cross sections by subtraction

Science.gov (United States)

Somogyi, G.; Bolzoni, P.; Trócsányi, Z.

2010-08-01

We report on the computation of a class of integrals that appear when integrating the so-called iterated singly-unresolved approximate cross section of the NNLO subtraction scheme of Refs. [G. Somogyi, Z. Trócsányi, and V. Del Duca, JHEP 06, 024 (2005), arXiv:hep-ph/0502226; G. Somogyi and Z. Trócsányi, (2006), arXiv:hep-ph/0609041; G. Somogyi, Z. Trócsányi, and V. Del Duca, JHEP 01, 070 (2007), arXiv:hep-ph/0609042; G. Somogyi and Z. Trócsányi, JHEP 01, 052 (2007), arXiv:hep-ph/0609043] over the factorised phase space of unresolved partons. The integrated approximate cross section itself can be written as the product of an insertion operator (in colour space) times the Born cross section. We give selected results for the insertion operator for processes with two and three hard partons in the final state.

40 CFR 52.2087 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section... Original identification of plan section. (a) This section identifies the original “Air Implementation Plan.... (B) Original consent agreement between the Rhode Island Department of Environmental Management and...

Multifamily Assistance Section 8 Contracts

Data.gov (United States)

Department of Housing and Urban Development — he information regarding the Multifamily Assistance and Section 8 contracts, and properties is being furnished for the convenience of interested parties. The...

Validation of evaluated neutron standard cross sections

International Nuclear Information System (INIS)

Badikov, S.; Golashvili, T.

2008-01-01

Some steps of the validation and verification of the new version of the evaluated neutron standard cross sections were carried out. In particular: -) the evaluated covariance data was checked for physical consistency, -) energy-dependent evaluated cross-sections were tested in most important neutron benchmark field - 252 Cf spontaneous fission neutron field, -) a procedure of folding differential standard neutron data in group representation for preparation of specialized libraries of the neutron standards was verified. The results of the validation and verification of the neutron standards can be summarized as follows: a) the covariance data of the evaluated neutron standards is physically consistent since all the covariance matrices of the evaluated cross sections are positive definite, b) the 252 Cf spectrum averaged standard cross-sections are in agreement with the evaluated integral data (except for 197 Au(n,γ) reaction), c) a procedure of folding differential standard neutron data in group representation was tested, as a result a specialized library of neutron standards in the ABBN 28-group structure was prepared for use in reactor applications. (authors)

User's manual for BECAS. A cross section analysis tool for anisotropic and inhomogeneous beam sections of arbitrary geometry

Energy Technology Data Exchange (ETDEWEB)

Blasques, J.P.

2012-02-15

The BEam Cross section Analysis Software - BECAS - is a group of Matlab functions used for the analysis of the stiffness and mass properties of beam cross sections. The report presents BECAS' code and user's guide. (LN)

Parameterized representation of macroscopic cross section for PWR reactor

International Nuclear Information System (INIS)

Fiel, João Cláudio Batista; Carvalho da Silva, Fernando; Senra Martinez, Aquilino; Leal, Luiz C.

2015-01-01

Highlights: • This work describes a parameterized representation of the homogenized macroscopic cross section for PWR reactor. • Parameterization enables a quick determination of problem-dependent cross-sections to be used in few group calculations. • This work allows generating group cross-section data to perform PWR core calculations without computer code calculations. - Abstract: The purpose of this work is to describe, by means of Chebyshev polynomials, a parameterized representation of the homogenized macroscopic cross section for PWR fuel element as a function of soluble boron concentration, moderator temperature, fuel temperature, moderator density and 235 92 U enrichment. The cross-section data analyzed are fission, scattering, total, transport, absorption and capture. The parameterization enables a quick and easy determination of problem-dependent cross-sections to be used in few group calculations. The methodology presented in this paper will allow generation of group cross-section data from stored polynomials to perform PWR core calculations without the need to generate them based on computer code calculations using standard steps. The results obtained by the proposed methodology when compared with results from the SCALE code calculations show very good agreement

The total collision cross section in the glory region

International Nuclear Information System (INIS)

Biesen, J.J.H. van den.

1982-01-01

Chapter 1 presents a calculation of approximate total cross sections in the glory region from noble gas potentials. The relations between the main features of the total cross section and the properties of the potential to which these are sensitive are extensively investigated in chapter II. A beam apparatus has been developed, which allows for accurate measurements on the total cross section. All effects due to the finite angular and velocity resolution of the apparatus can be eliminated from the data to yield actual total cross sections as a function of the relative velocity. This facilitates a comparison to total cross sections predicted by potentials available in the literature. A brief description of the apparatus and of the data reduction is given in chapter III. The total cross section data obtained for various noble gas combinations are presented and analysed in chapter IV, where also a large number of potentials proposed in the literature is tested. In chapter V the quenching of the glories in the case of a non-spherical interaction is analysed. Subsequently, total cross section data for some atom-molecule systems are discussed. (Auth.)

Proton-air and proton-proton cross sections

Directory of Open Access Journals (Sweden)

Ulrich Ralf

2013-06-01

Full Text Available Different attempts to measure hadronic cross sections with cosmic ray data are reviewed. The major results are compared to each other and the differences in the corresponding analyses are discussed. Besides some important differences, it is crucial to see that all analyses are based on the same fundamental relation of longitudinal air shower development to the observed fluctuation of experimental observables. Furthermore, the relation of the measured proton-air to the more fundamental proton-proton cross section is discussed. The current global picture combines hadronic proton-proton cross section data from accelerator and cosmic ray measurements and indicates a good consistency with predictions of models up to the highest energies.

Fission-neutron displacement cross sections in metals

International Nuclear Information System (INIS)

Takamura, Saburo; Aruga, Takeo; Nakata, Kiyotomo

1985-01-01

The sensitivity damage rates for 22 metals were measured after fission-spectrum neutron irradiation at low temperature and the experimental damage rates were compared with the theoretical calculation. The relation between the theoretical displacement cross section and the atomic weight of metals can be written by two curves; one is for fcc and hcp metals, and another is for bcc metals. On the other hand, the experimental displacement cross section versus atomic weight is shown approximately by a curve for both fcc and bcc metals, and the cross section for hcp metals deviates from the curve. The defect production efficiency is 0.3-0.4 for fcc metals and 0.6-0.8 for bcc metals. (orig.)

Cross section library DOSCROS77 (in the SAND-II format)

International Nuclear Information System (INIS)

Zijp, W.L.; Nolthenius, H.J.; Borg, N.J.C.M. van der.

1977-08-01

The dosimetry cross section library DOSCROS77 is documented with tables, plots and cross section values averaged over a few reference spectra. This library is based on the ENDF/B-IV dosimetry file, supplemented with some other evaluations. The total number of reaction cross section sets incorporated in this library is 49 (+3 cover cross sections sets). The cross section data are available in a format which is suitable for the program SAND-II

40 CFR 52.465 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Original identification of plan section... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Delaware § 52.465 Original identification of plan section. (a) This section identifies the original “Air Implementation Plan for the State...

40 CFR 52.69 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Original identification of plan section... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Alabama § 52.69 Original identification of plan section. (a) This section identifies the original “Air Implementation Plan for the State...

40 CFR 52.536 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Original identification of plan section... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Florida § 52.536 Original identification of plan section. (a) This section identifies the original “State of Florida Air Implementation...

40 CFR 52.939 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Original identification of plan section... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Kentucky § 52.939 Original identification of plan section. (a) This section identifies the original “Air Implementation Plan for the...

40 CFR 52.677 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Original identification of plan section... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Idaho § 52.677 Original identification of plan section. (a) This section identifies the original “Idaho Air Quality Implementation Plan...

40 CFR 52.824 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Original identification of plan section... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Iowa § 52.824 Original identification of plan section. (a) This section identifies the original “Air Implementation Plan for the State...

40 CFR 52.2635 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section... Original identification of plan section. (a) This section identifies the original “Air Implementation Plan... implementation plan (SIP) for Sheridan, Wyoming. In addition to the original August 28 submittal, eight...

40 CFR 52.875 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Original identification of plan section... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Kansas § 52.875 Original identification of plan section. (a) This section identifies the original “Air Quality Implementation Plan for the...

40 CFR 52.590 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Original identification of plan section... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Georgia> § 52.590 Original identification of plan section. (a) This section identifies the original “Air Implementation Plan for the State...

40 CFR 52.200 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Original identification of plan section... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Arkansas § 52.200 Original identification of plan section. (a) This section identifies the original “Arkansas Plan for Implementation for...

40 CFR 52.2134 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section... Original identification of plan section. (a) This section identifies the original “South Carolina Air... Charleston; for these two sources, the plan's original emission limits continue to apply.) (10) Permit...

40 CFR 52.999 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Original identification of plan section... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Louisiana § 52.999 Original identification of plan section. (a) This section identifies the original “The Louisiana Air Control Commission...

Unsteady potential flow past a propeller blade section

Science.gov (United States)

Takallu, M. A.

1990-01-01

An analytical study was conducted to predict the effect of an oscillating stream on the time dependent sectional pressure and lift coefficients of a model propeller blade. The assumption is that as the blade sections encounter a wake, the actual angles of attack vary in a sinusoidal manner through the wake, thus each blade is exposed to an unsteady stream oscillating about a mean value at a certain reduced frequency. On the other hand, an isolated propeller at some angle of attack can experience periodic changes in the value of the flow angle causing unsteady loads on the blades. Such a flow condition requires the inclusion of new expressions in the formulation of the unsteady potential flow around the blade sections. These expressions account for time variation of angle of attack and total shed vortices in the wake of each airfoil section. It was found that the final expressions for the unsteady pressure distribution on each blade section are periodic and that the unsteady circulation and lift coefficients exhibit a hysteresis loop.

JSD1000: multi-group cross section sets for shielding materials

International Nuclear Information System (INIS)

Yamano, Naoki

1984-03-01

A multi-group cross section library for shielding safety analysis has been produced by using ENDF/B-IV. The library consists of ultra-fine group cross sections, fine-group cross sections, secondary gamma-ray production cross sections and effective macroscopic cross sections for typical shielding materials. Temperature dependent data at 300, 560 and 900 K have been also provided. Angular distributions of the group to group transfer cross section are defined by a new method of ''Direct Angular Representation'' (DAR) instead of the method of finite Legendre expansion. The library designated JSD1000 are stored in a direct access data base named DATA-POOL and data manipulations are available by using the DATA-POOL access package. The 3824 neutron group data of the ultra-fine group cross sections and the 100 neutron, 20 photon group cross sections are applicable to shielding safety analyses of nuclear facilities. This report provides detailed specifications and the access method for the JSD1000 library. (author)

Total cross section of highly excited strings

International Nuclear Information System (INIS)

Lizzi, F.; Senda, I.

1990-01-01

The unpolarized total cross section for the joining of two highly excited strings is calculated. The calculation is performed by taking the average overall states in the given excitation levels of the initial strings. We find that the total cross section grows with the energy and momentum of the initial states. (author). 8 refs, 1 fig

Calculation of the intermediate energy activation cross section

Energy Technology Data Exchange (ETDEWEB)

Furihata, Shiori; Yoshizawa, Nobuaki [Mitsubishi Research Inst., Inc., Tokyo (Japan)

1997-03-01

We discussed the activation cross section in order to predict accurately the activation of soil around an accelerator with high energy and strong intensity beam. For the assessment of the accuracy of activation cross sections estimated by a numerical model, we compared the calculated cross section with various experimental data, for Si(p,x){sup 22}Na, Al(p,x){sup 22}Na, Fe(p,x){sup 22}Na, Si(p,x){sup 7}Be, O(p,x){sup 3}H, Al(p,x){sup 3}H and Si(p,x){sup 3}H reactions. We used three computational codes, i.e., quantum molecular dynamics (QMD) plus statistical decay model (SDM), HETC-3STEP and the semiempirical method developed by Silberberg et.al. It is observed that the codes are accurate above 1GeV, except for {sup 7}Be production. We also discussed the difference between the activation cross sections of proton- and neutron-induced reaction. For the incident energy at 40MeV, it is found that {sup 3}H production cross sections of neutron-induced reaction are ten times as large as those of proton-induced reaction. It is also observed that the choice of the activation cross sections seriously affects to the estimate of saturated radioactivity, if the maximum energy of neutron flux is below 100MeV. (author)

14 CFR Section 3 - Chart of Balance Sheet Accounts

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Chart of Balance Sheet Accounts Section 3 Section 3 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION... Balance Sheet Classifications Section 3 Chart of Balance Sheet Accounts [See footnotes at end of table...

Outcome of caesarean section at the Edward Francis Small ...

African Journals Online (AJOL)

Data was extracted from patients' record. Descriptive ... Results: The Caesarean section rate in the hospital is 24.0%. ... Caesarean section, a surgical procedure to deliver a baby ... rate remain uncertain in the short and long term and the ... Educational level ... Table 4: Duration of hospitalization after caesarean section.

Distribution functions of sections and projections of convex bodies

OpenAIRE

Kim, Jaegil; Yaskin, Vladyslav; Zvavitch, Artem

2015-01-01

Typically, when we are given the section (or projection) function of a convex body, it means that in each direction we know the size of the central section (or projection) perpendicular to this direction. Suppose now that we can only get the information about the sizes of sections (or projections), and not about the corresponding directions. In this paper we study to what extent the distribution function of the areas of central sections (or projections) of a convex body can be used to derive ...

Temperature-dependent absorption cross sections for hydrogen peroxide vapor

Science.gov (United States)

Nicovich, J. M.; Wine, P. H.

1988-01-01

Relative absorption cross sections for hydrogen peroxide vapor were measured over the temperature ranges 285-381 K for lambda = 230 nm-295 nm and 300-381 K for lambda = 193 nm-350 nm. The well established 298 K cross sections at 202.6 and 228.8 nm were used as an absolute calibration. A significant temperature dependence was observed at the important tropospheric photolysis wavelengths lambda over 300 nm. Measured cross sections were extrapolated to lower temperatures, using a simple model which attributes the observed temperature dependence to enhanced absorption by molecules possessing one quantum of O-O stretch vibrational excitation. Upper tropospheric photodissociation rates calculated using the extrapolated cross sections are about 25 percent lower than those calculated using currently recommended 298 K cross sections.

View-CXS neutron and photon cross-sections viewer

International Nuclear Information System (INIS)

Subbaiah, K.V.; Sunil Sunny, C.

2004-01-01

A graphical user-friendly interface is developed in Visual Basic (VB)-6 to view the variation of neutron and photon interaction cross-sections of different isotopes as a function of energy. VB subroutines developed read the binary data files of cross-sections created in MCNP-ACE (Briesmeister, J.F., 1993. MCNP - a general purpose Monte Carlo N-Particle Transport code. Version 4A. LANL, USA), ANISN-DLC (Engle W.W. Jr., 1967, A User's Manual for ANISN, K-1693; ORNL, 1974. 100 group neutron cross section data based on ENDF/B-III. Oak Ridge National Laboratory, USA) and KENO-AMPX (Petrie, L.M., Landers, N.F., 1984 KENO-Va- An Improved Monte Carlo Criticality Program with Super Grouping. RSICC-CCC-548, USA) formats using LAHEY-77 Fortran Compiler. The information on isotopes present in each library will be displayed with the help of database files prepared using Micro-Soft ACESS. The cross-section data can be viewed in different presentation styles namely, line graphs, bar graphs, histograms etc., with different color and symbol options. The cross-section plots generated can be saved as Bit-Map file to embed in any other text files. This software enables inter comparison of cross-sections from different type of libraries for isotopes as well as mixtures. Provision is made to view the cross-sections for nuclear reactions such as (n,γ), (n,f), (n,α), etc. The software can be obtained from Radiation Safety Information and Computational Centre (RSICC), ORNL, USA with the code package identification number PSR-514. The software package needs a hard disk space of about 80 MB when installed and works in WINDOWS-95/98/2000 operating systems

Cesarean section among immigrants in Norway.

Science.gov (United States)

Vangen, S; Stoltenberg, C; Skrondal, A; Magnus, P; Stray-Pedersen, B

2000-07-01

We studied prevalences and risk factors for cesarean section among different groups of immigrants from countries outside Western Europe and North America in comparison to ethnic Norwegians. The study is population based using data from the Medical Birth Registry of Norway. A total of 553,491 live births during the period 1986-1995 were studied, including 17,891 births to immigrant mothers. The prevalences of cesarean section ranged from 10.1% among women from Vietnam to 25.8% in the group of Filipino origin. The use of abdominal delivery was also high in the groups from Sri Lanka/India (21.3%), Somalia/Eritrea/Ethiopia (20.5%) and Chile/Brazil (24.3%), while the frequency among women from Turkey/Morocco (12.6%) and Pakistan (13.2%) was approximately the same as among ethnic Norwegians (12.4%). Feto-pelvic disproportion, fetal distress and prolonged labor were the most important diagnoses associated with the high prevalences, but the significance of these diagnoses differed among the groups. Other unknown factors come into play, particularly among women from Somalia/Eritrea/Ethiopia and Chile/Brazil. There was substantial variation in the use of cesarean section among ethnic groups in Norway. The diagnoses feto-pelvic disproportion, fetal distress and prolonged labor may be confounded by a number of factors including maternal request for cesarean section and difficulties in handling the delivery. Further research is needed to explain the observed differences.

Compact fitting formulas for electron-impact cross sections

International Nuclear Information System (INIS)

Kim, Y.K.

1992-01-01

Compact fitting formulas, which contain four fitting constants, are presented for electron-impact excitation and ionization cross sections of atoms and ions. These formulas can fit experimental and theoretical cross sections remarkably well, when resonant structures are smoothed out, from threshold to high incident electron energies (<10 keV), beyond which relativistic formulas are more appropriate. Examples of fitted cross sections for some atoms and ions are presented. The basic form of the formula is valid for both atoms and molecules

Fetomaternal hemorrhage in women undergoing elective cesarean section

DEFF Research Database (Denmark)

Perslev, Anette; Jørgensen, Finn Stener; Nielsen, Leif Kofoed

2010-01-01

Objective. To investigate the degree of fetomaternal hemorrhage (FMH) caused by elective cesarean section. Design. Descriptive study. Settings. University Hospitals in Copenhagen, Denmark. Population. Women scheduled for elective cesarean section, in the period September 2007 to January 2009......, at the Department of Gynecology and Obstetrics, Hvidovre Hospital, University of Copenhagen, Denmark. Methods. Two maternal blood samples were taken, the first before cesarean section and the second immediately after. Both samples were analyzed at the Blood Bank, Rigshospitalet, Copenhagen, for the presence...

Section of Atomic Collisions

International Nuclear Information System (INIS)

Berenyi, D.; Biri, S.; Gulyas, L.; Juhasz, Z.; Kover, A.; Orban, A.; Palinkas, J.; Papp, T.; Racz, R.; Ricz, S.

2009-01-01

The Section of Atomic Collisions is a research unit with extended activity in the field of atomic and molecular physics. Starting from the study of atomic processes at the beamlines of nuclear physics accelerators in the seventies, our research community became one of the centers of fundamental research in Atomki. We also have a strong connection to materials sciences especially along the line of electron and ion spectroscopy methods. Our present activity covers a wide range of topics from atomic collision mechanisms of fundamental interest, to the complex interactions of electrons, ions, photons and antiparticles with atoms, molecules, surfaces, and specific nanostructures. In the last few years, an increasing fraction of our present topics has become relevant for applications, e.g., molecular collision studies for the radiation therapy methods of tumors, or ion-nanostructure interactions for the future construction of small ion-focusing elements. Our section belongs to the Division of Atomic Physics. The other unit of the Division is the Section of Electron Spectroscopy and Materials Sciences. There are traditionally good connections and a strong collaboration between the groups of the two sections in many fields. From the very beginning of our research work in atomic collisions, external collaborations were of vital importance for us. We regularly organize international workshops in the field of fast ion-atom collisions and related small conferences in Debrecen from 1981. Recently, we organized the Conference on Radiation Damage in Biomolecular Systems (RADAM 2008, Debrecen), and coorganized the Conference on Elementary Processes in Atomic Systems (CEPAS 2008, Cluj). We have access to several large scale facilities in Europe within the framework of formal and informal collaborations. The next themes are in this article: Forward electron emission from energetic atomic collisions; Positron-atom collisions; Photon-atom interactions; Interference effects in electron

Single-level resonance parameters fit nuclear cross-sections

Science.gov (United States)

Drawbaugh, D. W.; Gibson, G.; Miller, M.; Page, S. L.

1970-01-01

Least squares analyses of experimental differential cross-section data for the U-235 nucleus have yielded single level Breit-Wigner resonance parameters that fit, simultaneously, three nuclear cross sections of capture, fission, and total.

26 CFR 1.48-2 - New section 38 property.

Science.gov (United States)

2010-04-01

... Computing Credit for Investment in Certain Depreciable Property § 1.48-2 New section 38 property. (a) In... shall be taken into account as the basis of new section 38 property in determining qualified investment... taken into account by the taxpayer in computing qualified investment in new section 38 property. Example...

40 CFR 52.1960 - Original Identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original Identification of plan section... Original Identification of plan section. (a) This section identifies the original “State of Oklahoma Air... § 856.1(C) of the Oklahoma statutes to mean “original equipment manufacturer (OEM) or equivalent”. (40...

40 CFR 52.2386 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section... Original identification of plan section. (a) This section identifies the original “Air Implementation Plan... from the original approval of Regulation 5-231(3)(b) into the Vermont SIP identified at subparagraph (c...

40 CFR 52.1837 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section... Original identification of plan section. (a) This section identifies the original “Air Implementation Plan...) Explanation of why sources could not comply by the original attainment date submitted April 23, 1975, by the...

Organic research section. 1984 review and 1985 programs

International Nuclear Information System (INIS)

Glass, R.W.

1985-02-01

This report reviews the major activities and accomplishments of the Organic Research Section in 1984 and presents the 1985 work program. The three major areas of the Section's research work are non-metallic materials which includes applications and uses of plastics, petroleum products, coatings and elastomers; reactor waste management; and activity transport/decontamination of nuclear systems. In 1984, 50% of the Section's resources were used on studies in support of nuclear generation, 13% on reactor waste, and 37% on general activities and work in support of utilization, transmission and distribution, and thermal and hydraulic programs. About 60% of the section's work was supported by transfer and revenue funds as a result of urgent short-term work requirements which resulted in 68% of the work falling into the technical investigation, consulting and testing categories

Heavy flavour hadro-production cross-sections

CERN Document Server

Wöhri, H K

2003-01-01

Hadro-production data on charm and beauty absolute cross-sections, collected by experiments at CERN, DESY and Fermilab, are reviewed. The measurements, corrected for the 'time evolution' of the branching ratios, are compared to calculations done with Pythia, as a function of the collision energy, using the latest parametrizations of the parton densities. We then estimate some charm and beauty production cross-sections relevant for future measurements, including nuclear effectes in the PDFs. We finish by briefly addressing the relevance, in heavy-ion collisions, of beauty production as feed-down for J/psi production.

Cesarean section changes neonatal gut colonization

DEFF Research Database (Denmark)

Stokholm, Jakob; Thorsen, Jonathan; Chawes, Bo L

2016-01-01

BACKGROUND: Delivery by means of cesarean section has been associated with increased risk of childhood immune-mediated diseases, suggesting a role of early bacterial colonization patterns for immune maturation. OBJECTIVE: We sought to describe the influence of delivery method on gut and airway......-driven partial least squares analyses. The initial airway microbiota was unaffected by birth method. CONCLUSION: Delivery by means of cesarean section was associated with early colonization patterns of the neonatal gut but not of the airways. The differences normalized within the first year of life. We speculate...

Neutron cross section libraries for analysis of fusion neutronics experiments

International Nuclear Information System (INIS)

Kosako, Kazuaki; Oyama, Yukio; Maekawa, Hiroshi; Nakamura, Tomoo

1988-03-01

We have prepared two computer code systems producing neutron cross section libraries to analyse fusion neutronics experiments. First system produces the neutron cross section library in ANISN format, i.e., the multi-group constants in group independent format. This library can be obtained by using the multi-group constant processing code system MACS-N and the ANISN format cross section compiling code CROKAS. Second system is for the continuous energy cross section library for the MCNP code. This library can be obtained by the nuclear data processing system NJOY which generates pointwise energy cross sections and the cross section compiling code MACROS for the MCNP library. In this report, we describe the production procedures for both types of the cross section libraries, and show six libraries with different conditions in ANISN format and a library for the MCNP code. (author)

[Vaginal birth after cesarean section in light of international opinions].

Science.gov (United States)

Németh, Gábor; Molnár, András

2017-07-01

The tendency of increasing cesarean section rate has drawn worldwide attention. The vaginal birth after cesarean section is a useful method to decrease cesarean section rate at defined cases. Retrospective overview of factors resulting successful vaginal birth, labor/induction's condition, criterias, short and long term benefits and consequences. Overview recommendations of international guidelines and publications' results concerned vaginal birth after cesarean section in "PubMed", "MEDLINE", "Cochrane" databases from 1996 to 2016. Reviewing results of recommendations and publications we can declare that statements are inconsistent, however the option of vaginal birth after cesarean section is appropriate for decrease complications and trend of increasing cesarean section rate. It would be important in our country to define a uniform recommendation regarding vaginal birth after cesarean section, with supporting evidence in obstetrical and gynecological practice. Orv Hetil. 2017; 158(30): 1168-1174.

40 CFR 52.1037 - Original identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original identification of plan section... identification of plan section. (a) This section identifies the original “Air Implementation Plan for the State...), and conditions 12(A), 12(C), (13), (14) and (15) for Tree Free Fiber Company, LLC, (formerly Statler...

Sectional Rail System as Base for a Plate Covering

DEFF Research Database (Denmark)

2015-01-01

The present invention concerns a sectional rail system which is constructed with the known outer rails with U-shaped cross-section and intermediate rails with C-shaped cross-section, and which is peculiar in that each of the retention means of the outer rail includes at least one stop pin which i...

40 CFR 52.1190 - Original Identification of plan section.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Original Identification of plan section... Original Identification of plan section. (a) This section identifies the original “Air Implementation Plan... Stipulation for Entry of Consent Order and Final Order, No. 8-1982. The original Consent Order No. 8-1982 was...

28 CFR 55.6 - Coverage under section 203(c).

Science.gov (United States)

2010-07-01

... THE VOTING RIGHTS ACT REGARDING LANGUAGE MINORITY GROUPS Nature of Coverage § 55.6 Coverage under section 203(c). (a) Coverage formula. There are four ways in which a political subdivision can become subject to section 203(c). 2 2 The criteria for coverage are contained in section 203(b). (1) Political...

Mid-IR Absorption Cross-Section Measurements of Hydrocarbons

KAUST Repository

Alrefae, Majed Abdullah

2013-01-01

-known at combustion-relevant conditions. Absorption cross-section is an important spectroscopic quantity and has direct relation to the species concentration. In this work, the absorption cross-sections of basic hydrocarbons are measured using Fourier Transform

LHCb cross-section measurements with heavy flavour jets

CERN Multimedia

Michielin, Emanuele

2017-01-01

Cross-section measurements of jets originating from the hadronization of beauty ($b$) and charm ($c$) quarks at LHCb give the unique opportunity to probe Parton Distribution Functions (PDFs) at low and large momentum fraction and to test the Standard Model in the forward region. In this poster the production of $t\\bar{t}$ pairs in the forward region, the measurement of the $W+b\\bar{b}$ and $W+c\\bar{c}$ cross-section and the measurement of the $Z\\rightarrow b\\bar{b}$ cross-section are presented.

Priority cross-sections. Joint Nordic analyses of important cross-sections in the Nordel system. Main report

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-06-01

The Nordic Grid Master Plan 2002 shed light on the energy and power balance for the Nordel area but with special focus on 2005. There was a lot to suggest that the tradi-tional transport patterns with frequent southbound transports would change and be more frequently replaced by northbound transports. Against this background, a number of cross-sections were identified within the Nordel area where expansion is expected to have considerable significance for the Nordic elec-tricity market. The present report 'Priority Cross-sections' concludes the work which was started with the grid master plan. The priority cross-sections are subjected to a technical and socio-economic analysis. The analysis aims to understand the transports in the Nordel system and to support Nor-del when prioritizing forthcoming initiatives. The market price is the driving force for the initiatives which will be carried out on the supply and demand side. The commissioning and decommissioning of commercial pro-duction capacity is determined by the market players, and the task of the transmission system operators (TSOs) is to ensure a robust infrastructure for the smooth operation of the electricity market. (au)

Performance of Virginia's warm-mix asphalt trial sections.

Science.gov (United States)

2010-02-01

Three trial sections using two warm-mix asphalt (WMA) technologies were constructed in various locations in Virginia in 2006, and experiences with these trial sections were used in the development of the Virginia Department of Transportation's specia...

Absolute photoionization cross-section of the methyl radical.

Science.gov (United States)

Taatjes, Craig A; Osborn, David L; Selby, Talitha M; Meloni, Giovanni; Fan, Haiyan; Pratt, Stephen T

2008-10-02

The absolute photoionization cross-section of the methyl radical has been measured using two completely independent methods. The CH3 photoionization cross-section was determined relative to that of acetone and methyl vinyl ketone at photon energies of 10.2 and 11.0 eV by using a pulsed laser-photolysis/time-resolved synchrotron photoionization mass spectrometry method. The time-resolved depletion of the acetone or methyl vinyl ketone precursor and the production of methyl radicals following 193 nm photolysis are monitored simultaneously by using time-resolved synchrotron photoionization mass spectrometry. Comparison of the initial methyl signal with the decrease in precursor signal, in combination with previously measured absolute photoionization cross-sections of the precursors, yields the absolute photoionization cross-section of the methyl radical; sigma(CH3)(10.2 eV) = (5.7 +/- 0.9) x 10(-18) cm(2) and sigma(CH3)(11.0 eV) = (6.0 +/- 2.0) x 10(-18) cm(2). The photoionization cross-section for vinyl radical determined by photolysis of methyl vinyl ketone is in good agreement with previous measurements. The methyl radical photoionization cross-section was also independently measured relative to that of the iodine atom by comparison of ionization signals from CH3 and I fragments following 266 nm photolysis of methyl iodide in a molecular-beam ion-imaging apparatus. These measurements gave a cross-section of (5.4 +/- 2.0) x 10(-18) cm(2) at 10.460 eV, (5.5 +/- 2.0) x 10(-18) cm(2) at 10.466 eV, and (4.9 +/- 2.0) x 10(-18) cm(2) at 10.471 eV. The measurements allow relative photoionization efficiency spectra of methyl radical to be placed on an absolute scale and will facilitate quantitative measurements of methyl concentrations by photoionization mass spectrometry.

Asymptotic behaviour of pion-pion total cross-sections

Energy Technology Data Exchange (ETDEWEB)

Greynat, David [Dipartimento di Scienze Fisiche, Universita di Napoli “Federico II”,Via Cintia, 80126 Napoli (Italy); Rafael, Eduardo de [Aix-Marseille Université, CNRS,CPT, UMR 7332, 13288 Marseille (France); Université de Toulon, CNRS,CPT, UMR 7332, 83957 La Garde (France); Vulvert, Grégory [Departament de Física Teórica, IFIC,CSIC - Universitat de València, Apt. Correus 22085, E-46071 València (Spain)

2014-03-24

We derive a sum rule which shows that the Froissart-Martin bound for the asymptotic behaviour of the ππ total cross sections at high energies, if modulated by the Lukaszuk-Martin coefficient of the leading log{sup 2} s behaviour, cannot be an optimal bound in QCD. We next compute the total cross sections for π{sup +}π{sup −}, π{sup ±}π{sup 0} and π{sup 0}π{sup 0} scattering within the framework of the constituent chiral quark model (CχQM) in the limit of a large number of colours N{sub c} and discuss their asymptotic behaviours. The same ππ cross sections are also discussed within the general framework of Large-N{sub c} QCD and we show that it is possible to make an Ansatz for the isospin I=1 and I=0 spectrum which satisfy the Froissart-Martin bound with coefficients which, contrary to the Lukaszuk-Martin coefficient, are not singular in the chiral limit and have the correct Large-N{sub c} counting. We finally propose a simple phenomenological model which matches the low energy behaviours of the σ{sub π{sup ±}π{sup 0total}}(s) cross section predicted by the CχQM with the high energy behaviour predicted by the Large-N{sub c} Ansatz. The magnitude of these cross sections at very high energies is of the order of those observed for the pp and pp-bar scattering total cross sections.

Asymptotic behaviour of pion-pion total cross-sections

International Nuclear Information System (INIS)

Greynat, David; Rafael, Eduardo de; Vulvert, Grégory

2014-01-01

We derive a sum rule which shows that the Froissart-Martin bound for the asymptotic behaviour of the ππ total cross sections at high energies, if modulated by the Lukaszuk-Martin coefficient of the leading log 2  s behaviour, cannot be an optimal bound in QCD. We next compute the total cross sections for π + π − , π ± π 0 and π 0 π 0 scattering within the framework of the constituent chiral quark model (CχQM) in the limit of a large number of colours N c and discuss their asymptotic behaviours. The same ππ cross sections are also discussed within the general framework of Large-N c QCD and we show that it is possible to make an Ansatz for the isospin I=1 and I=0 spectrum which satisfy the Froissart-Martin bound with coefficients which, contrary to the Lukaszuk-Martin coefficient, are not singular in the chiral limit and have the correct Large-N c counting. We finally propose a simple phenomenological model which matches the low energy behaviours of the σ π ± π 0 total (s) cross section predicted by the CχQM with the high energy behaviour predicted by the Large-N c Ansatz. The magnitude of these cross sections at very high energies is of the order of those observed for the pp and pp-bar scattering total cross sections

[Caesarean section with vacuum extraction of the head].

Science.gov (United States)

Dimitrov, A; Pavlova, E; Krŭsteva, K; Nikolov, A

2008-01-01

The aim of the study is to investigate the benefits and the limits in using the soft cup vacuum extractor on the fetal scalp during the caesarean section. The prospective study includes 19 cases of caesarean sections (group A), with vacuum assisted delivery using the soft cup vacuum extractor on the fetal scalp (diameter 6 cm) and 25 cases (group B) of caesarean sections with usual, manual extraction of the head assisted by fundal compression. All of the patients had undergone a planned caesarean section on term in absence of uterine activity and preserved amniotic membranes. Our results doesn't show differences in the Apgar score on the first and 5-th minute in the newborns of the two groups. The duration of the scalp traction was significantly shorter (30 +/- 4 sec) in comparison to the classical manual extraction (53 +/- 21 sec). The mean duration for applying the vacuum cup was 10 sec and 25 sec for tractions. The total blood loose and total duration of the caesarean sections were shorter than in the control group. The applied traction with the vacuum cup was sufficient for head extraction and there was no need for additional fundal compression. In conclusion we consider that the extraction of the fetal head in high position in caesarean section with vacuum extractor is an easy, non traumatic and rapid method which can put away the need of rough and prolonged fundal compression and its consequences.

Methods of achieving and maintaining an appropriate caesarean section rate.

LENUS (Irish Health Repository)

Robson, Michael

2013-04-01

Caesarean section rates continue to increase worldwide. The appropriate caesarean section rate remains a topic of debate among women and professionals. Evidence-based medicine has not provided an answer and depends on interpretation of the literature. Overall caesarean section rates are unhelpful, and caesarean section rates should not be judged in isolation from other outcomes and epidemiological characteristics. Better understanding of caesarean section rates, their consequences and their benefits will improve care, and enable learning between delivery units nationally and internationally. To achieve and maintain an appropriate caesarean section rate requires a Multidisciplinary Quality Assurance Programme in each delivery unit, recognising caesarean section rates as one of many factors that determine quality. Women will always choose the type of delivery that seems safest to them and their babies. Professionals need to monitor the quality of their practice continuously in a standardised way to ensure that women can make the right choice.

Studies on Section XI ultrasonic repeatability

International Nuclear Information System (INIS)

Jamison, T.D.; McDearman, W.R.

1981-05-01

A block representative of a nuclear component has been welded containing intentional defects. Acoustic emission data taken during the welding correlate well with ultrasonic data. Repetitive ultrasonic examinations have been performed by skilled operators using a procedure based on that desribed in ASME Section XI. These examinations were performed by different examination teams using different ultrasonic equipment in such a manner that the effects on the repeatability of the ultrasonic test method caused by the operator and by the use of different equipment could be estimated. It was tentatively concluded that when considering a large number of inspections: (1) there is no significant difference in indication sizing between operators, and (2) there is a significant difference in amplitude and defect sizing when instruments having different, Code acceptable operating characteristics are used. It was determined that the Section XI sizing parameters follow a bivariate normal distribution. Data derived from ultrasonically and physically sizing indications in nuclear components during farication show that the Section XI technique tends to overestimate the size of the reflectors

Measurement of actinide neutron cross sections

International Nuclear Information System (INIS)

Firestone, Richard B.; Nitsche, Heino; Leung, Ka-Ngo; Perry, DaleL.; English, Gerald

2003-01-01

The maintenance of strong scientific expertise is critical to the U.S. nuclear attribution community. It is particularly important to train students in actinide chemistry and physics. Neutron cross-section data are vital components to strategies for detecting explosives and fissile materials, and these measurements require expertise in chemical separations, actinide target preparation, nuclear spectroscopy, and analytical chemistry. At the University of California, Berkeley and the Lawrence Berkeley National Laboratory we have trained students in actinide chemistry for many years. LBNL is a leader in nuclear data and has published the Table of Isotopes for over 60 years. Recently, LBNL led an international collaboration to measure thermal neutron capture radiative cross sections and prepared the Evaluated Gamma-ray Activation File (EGAF) in collaboration with the IAEA. This file of 35, 000 prompt and delayed gamma ray cross-sections for all elements from Z=1-92 is essential for the neutron interrogation of nuclear materials. LBNL has also developed new, high flux neutron generators and recently opened a 1010 n/s D+D neutron generator experimental facility

Section Preequating under the Equivalent Groups Design without IRT

Science.gov (United States)

Guo, Hongwen; Puhan, Gautam

2014-01-01

In this article, we introduce a section preequating (SPE) method (linear and nonlinear) under the randomly equivalent groups design. In this equating design, sections of Test X (a future new form) and another existing Test Y (an old form already on scale) are administered. The sections of Test X are equated to Test Y, after adjusting for the…

Oral microflora in infants delivered vaginally and by caesarean section

DEFF Research Database (Denmark)

Nelun Barfod, Mette; Magnusson, Kerstin; Lexner, Michala Oron

2011-01-01

International Journal of Paediatric Dentistry 2011 Background. Early in life, vaginally delivered infants exhibit a different composition of the gut flora compared with infants delivered by caesarean section (C-section); however, it is unclear whether this also applies to the oral cavity. Aim....... To investigate and compare the oral microbial profile between infants delivered vaginally and by C-section. Design. This is a cross-sectional case-control study. Eighty-four infants delivered either vaginally (n = 42) or by C-section (n = 42) were randomly selected from the 2009 birth cohort at the County...

Neutron total scattering cross sections of elemental antimony

Energy Technology Data Exchange (ETDEWEB)

Smith, A.B.; Guenther, P.T.; Whalen, J.F.

1982-11-01

Neutron total cross sections are measured from 0.8 to 4.5 MeV with broad resolutions. Differential-neutron-elastic-scattering cross sections are measured from 1.5 to 4.0 MeV at intervals of 50 to 200 keV and at scattering angles distributed between 20 and 160 degrees. Lumped-level neutron-inelastic-scattering cross sections are measured over the same angular and energy range. The exPerimental results are discussed in terms of an optical-statistical model and are compared with respective values given in ENDF/B-V.

Neutron total scattering cross sections of elemental antimony

International Nuclear Information System (INIS)

Smith, A.B.; Guenther, P.T.; Whalen, J.F.

1982-11-01

Neutron total cross sections are measured from 0.8 to 4.5 MeV with broad resolutions. Differential-neutron-elastic-scattering cross sections are measured from 1.5 to 4.0 MeV at intervals of 50 to 200 keV and at scattering angles distributed between 20 and 160 degrees. Lumped-level neutron-inelastic-scattering cross sections are measured over the same angular and energy range. The exPerimental results are discussed in terms of an optical-statistical model and are compared with respective values given in ENDF/B-V

Fetomaternal hemorrhage in women undergoing elective cesarean section

DEFF Research Database (Denmark)

Perslev, Anette; Jørgensen, Finn Stener; Nielsen, Leif Kofoed

2011-01-01

OBJECTIVE: To investigate the degree of fetomaternal hemorrhage (FMH) caused by elective cesarean section. DESIGN: Descriptive study. SETTINGS: University Hospitals in Copenhagen, Denmark. POPULATION: Women scheduled for elective cesarean section, in the period September 2007 to January 2009, at ...

Methods for calculating anisotropic transfer cross sections

International Nuclear Information System (INIS)

Cai, Shaohui; Zhang, Yixin.

1985-01-01

The Legendre moments of the group transfer cross section, which are widely used in the numerical solution of the transport calculation can be efficiently and accurately constructed from low-order (K = 1--2) successive partial range moments. This is convenient for the generation of group constants. In addition, a technique to obtain group-angle correlation transfer cross section without Legendre expansion is presented. (author)

Neutron cross section measurements for the Fast Breeder Program

International Nuclear Information System (INIS)

Block, R.C.

1979-06-01

This research was concerned with the measurement of neutron cross sections of importance to the Fast Breeder Reactor. The capture and total cross sections of fission products ( 101 102 104 Ru, 143 145 Nd, 149 Sm, 95 97 Mo, Cs, Pr, Pd, 107 Pd, 99 Tc) and tag gases (Kr, 78 80 Kr) were measured up to 100 keV. Filtered neutron beams were used to measure the capture cross section of 238 U (with an Fe filter) and the total cross section of Na (with a Na filter). A radioactive neutron capture detector was developed. A list of publications is included

Neutrino-nucleus cross sections for oscillation experiments

Science.gov (United States)

Katori, Teppei; Martini, Marco

2018-01-01

Neutrino oscillations physics is entering an era of high precision. In this context, accelerator-based neutrino experiments need a reduction in systematic errors to the level of a few percent. Today, one of the most important sources of systematic errors are neutrino-nucleus cross sections which, in the energy region of hundreds of MeV to a few GeV, are known to a precision not exceeding 20%. In this article we review the present experimental and theoretical knowledge of neutrino-nucleus interaction physics. After introducing neutrino-oscillation physics and accelerator-based neutrino experiments, we give an overview of general aspects of neutrino-nucleus cross sections, from both the theoretical and experimental point of view. Then, we focus on these cross sections in different reaction channels. We start with the quasi-elastic and quasi-elastic-like cross section, placing a special emphasis on the multinucleon emission channel, which has attracted a lot of attention in the last few years. We review the main aspects of the different microscopic models for this channel by discussing analogies and the differences among them. The discussion is always driven by a comparison with the experimental data. We then consider the one-pion production channel where agreement between data and theory remains highly unsatisfactory. We describe how to interpret pion data, and then analyze, in particular, the puzzle related to the difficulty of theoretical models and Monte Carlo to simultaneously describe MiniBooNE and MINERvA experimental results. Inclusive cross sections are also discussed, as well as the comparison between the {ν }μ and {ν }e cross sections, relevant for the charge-conjugation-parity violation experiments. The impact of nuclear effects on the reconstruction of neutrino energy and on the determination of the neutrino-oscillation parameters is also reviewed. Finally, we look to the future by discussing projects and efforts in relation to future detectors, beams

Evaluated activation cross-sections and intercomparison of the ...

Indian Academy of Sciences (India)

mental data cross-section with the theoretical codes, to study the quality of the theoretical ... the cross-section, angular distribution, double differential data, gamma ..... TALYS. TENDL. Figure 6. Excitation function of the 87Sr(p, 2n)86Y reaction.

Roles and responsibilities of the special-section editor

KAUST Repository

Marfurt, Kurt

2017-10-19

Interpretation differs from most journals in that each issue is built largely on special sections that focus on integrated multidisciplinary approaches, techniques in exploration and production, on a specific technology, on a specific basin, or on a specific type of geologic process or feature common to multiple basins. Such special sections provide the reader with the perspective and expertise of authors from different institutions and disciplines focused on the same problem. Depending on the topic, the resulting collection of papers may exhibit diversity, consensus, or both. While the editorial board of a given journal may be able to identify a subset of candidate topics for special sections, in-depth knowledge of critical problems and of the key players working on such topics is usually beyond their areas of expertise. To address this need, Interpretation draws upon such experts to construct most special sections. In addition to providing a focused collection of articles on a given topic, there are two additional advantages of the special-section format. First, the journal broadens the scope of contributors beyond those whose career advancement (typically in academia and in government laboratories) requires them to publish in peer-reviewed journals. Typically, the special-section organizers will identify oral presentations and expanded abstracts presented at meetings (such as SEG, AAPG, URTeC, OTC, and SPE) and ask the authors to expand upon their work and generate a more comprehensive document. Apart from a few technology companies, most companies do not use external publications as a component of career development. For this reason, requests by a respected special editorial team provides not only recognition to the authors, but also the justification of the authors’ management to allow them to build on their work. Nearly all companies include the act of supporting communities among their core values. Contributing to a special section is a great way for

Applications of the BEam Cross section Analysis Software (BECAS)

DEFF Research Database (Denmark)

Blasques, José Pedro Albergaria Amaral; Bitsche, Robert; Fedorov, Vladimir

2013-01-01

A newly developed framework is presented for structural design and analysis of long slender beam-like structures, e.g., wind turbine blades. The framework is based on the BEam Cross section Analysis Software – BECAS – a finite element based cross section analysis tool. BECAS is used for the gener......A newly developed framework is presented for structural design and analysis of long slender beam-like structures, e.g., wind turbine blades. The framework is based on the BEam Cross section Analysis Software – BECAS – a finite element based cross section analysis tool. BECAS is used...... for the generation of beam finite element models which correctly account for effects stemming from material anisotropy and inhomogeneity in cross sections of arbitrary geometry. These type of modelling approach allows for an accurate yet computationally inexpensive representation of a general class of three...

Pion-nucleus cross sections approximation

International Nuclear Information System (INIS)

Barashenkov, V.S.; Polanski, A.; Sosnin, A.N.

1990-01-01

Analytical approximation of pion-nucleus elastic and inelastic interaction cross-section is suggested, with could be applied in the energy range exceeding several dozens of MeV for nuclei heavier than beryllium. 3 refs.; 4 tabs

Radioecological state of the Czechoslovakian Danube section

International Nuclear Information System (INIS)

Kortus, J.; Mayer, J.; Kopuncova, T.; Vondra, M.

1984-01-01

As to be able to determine the radioactivity of the Czechoslovak section of the Danube river monthly water sampling and quarterly sediment, aquatic flora, and fauna sampling was performed. The results of this investigation have shown that the radioactivity level of our Danube section is low, consisting mostly of natural radionuclides. No relationships among respective seasons and radioactivity level were observed, neither any significant dependencies between flow rate and radionuclide level. In spite of the low radioactivity of the Czechoslovak Danube section we assume it necessary to continue in carrying out radiological analyses of water and sediment samples, as well as aquatic flora and fauna, since there are some nuclear power plants already in operation in the Danube basin and further are to be constructed or are already under construction. (author)

LEP beampipe section

CERN Multimedia

1989-01-01

Short section of beampipe from the Large Electron Positron collider (LEP, for short). With its 27-kilometre circumference, LEP was the largest electron-positron accelerator ever built and ran from 1989 to 2000 at CERN. During 11 years of research, LEP's experiments provided a detailed study of the electroweak interaction. Measurements performed at LEP also proved that there are three – and only three – generations of particles of matter. LEP was closed down on 2 November 2000 to make way for the construction of the Large Hadron Collider in the same tunnel.

Total cross sections for heavy flavour production at HERA

CERN Document Server

Frixione, Stefano; Nason, P; Ridolfi, G; Frixione, S; Mangano, M L; Nason, P; Ridolfi, G

1995-01-01

We compute total cross sections for charm and bottom photoproduction at HERA energies, and discuss the relevant theoretical uncertainties. In particular we discuss the problems arising from the small-x region, the uncertainties in the gluon parton density, and the uncertainties in the hadronic component of the cross section. Total electroproduction cross sections, calculated in the Weizs\\"acker-Williams approximation, are also given.

Clean Water Act (Section 404) and Rivers and Harbors Act (Sections 9 and 10). Environmental Guidance Program Reference Book, Revision 4

Energy Technology Data Exchange (ETDEWEB)

None

1992-03-01

This Reference Book contains a current copy of the Clean Water Act (Section 404) and the Rivers and Harbors Act (Sections 9 and 10) and those regulations that implement those sections of the statutes and appear to be most relevant to DOE activities. The document is provided to DOE and contractor staff for informational purposes only and should not be interpreted as legal guidance. Updates that include important new requirements will be provided periodically. Questions concerning this Reference Book may be directed to Mark Petts, IH-231 (FTS 896-2609 or Commercial 202/586-2609).

Mounting ground sections of teeth: Cyanoacrylate adhesive versus Canada balsam.

Science.gov (United States)

Vangala, Manogna Rl; Rudraraju, Amrutha; Subramanyam, R V

2016-01-01

Hard tissues can be studied by either decalcification or by preparing ground sections. Various mounting media have been tried and used for ground sections of teeth. However, there are very few studies on the use of cyanoacrylate adhesive as a mounting medium. The aim of our study was to evaluate the efficacy of cyanoacrylate adhesive (Fevikwik™) as a mounting medium for ground sections of teeth and to compare these ground sections with those mounted with Canada balsam. Ground sections were prepared from twenty extracted teeth. Each section was divided into two halves and mounted on one slide, one with cyanoacrylate adhesive (Fevikwik™) and the other with Canada balsam. Scoring for various features in the ground sections was done by two independent observers. Statistical analysis using Student's t-test (unpaired) of average scores was performed for each feature observed. No statistically significant difference was found between the two for most of the features. However, cyanoacrylate was found to be better than Canada balsam for observing striae of Retzius (P < 0.0205), enamel lamellae (P < 0.036), dentinal tubules (P < 0.0057), interglobular dentin (P < 0.0001), sclerotic dentin - transmitted light (P < 0.00001), sclerotic dentin - polarized light (P < 0.0002) and Sharpey's fibers (P < 0.0004). This initial study shows that cyanoacrylate is better than Canada balsam for observing certain features of ground sections of teeth. However, it remains to be seen whether it will be useful for studying undecalcified sections of carious teeth and for soft tissue sections.

Agaricus section Xanthodermatei: a phylogenetic reconstruction with commentary on taxa.

Science.gov (United States)

Kerrigan, Richard W; Callac, Philippe; Guinberteau, Jacques; Challen, Michael P; Parra, Luis A

2005-01-01

Agaricus section Xanthodermatei comprises a group of species allied to A. xanthodermus and generally characterized by basidiomata having phenolic odors, transiently yellowing discolorations in some parts of the basidiome, Schaeffer's reaction negative, and mild to substantial toxicity. The section has a global distribution, while most included species have distributions restricted to regions of single continents. Using specimens and cultures from Europe, North America, and Hawaii, we analyzed DNA sequences from the ITS1+2 region of the nuclear rDNA to identify and characterize phylogenetically distinct entities and to construct a hypothesis of relationships, both among members of the section and with representative taxa from other sections of the genus. 61 sequences from affiliated taxa, plus 20 from six (or seven) other sections of Agaricus, and one Micropsalliota sequence, were evaluated under distance, maximum parsimony and maximum likelihood methods. We recognized 21 discrete entities in Xanthodermatei, including 14 established species and 7 new ones, three of which are described elsewhere. Four species from California, New Mexico, and France deserve further study before they are described. Type studies of American taxa are particularly emphasized, and a lectotype is designated for A. californicus. Section Xanthodermatei formed a single clade in most analyses, indicating that the traditional sectional characters noted above are good unifying characters that appear to have arisen only once within Agaricus. Deep divisions within the sequence-derived structure of the section could be interpreted as subsections in Xanthodermatei; however, various considerations led us to refrain from proposing new supraspecific taxa. The nearest neighbors of section Xanthodermatei are putatively in section Duploannulati.

Photoionization cross sections: present status and future needs

International Nuclear Information System (INIS)

Manson, S.T.

1988-01-01

The existing experimental data situation for photoionization cross section of ground-state atoms, excited states and positive ions is reviewed. The ability of theory to predict these cross sections is also discussed. The likely progress for the near future is presented [pt

THE CAVALIERI ESTIMATOR WITH UNEQUAL SECTION SPACING REVISITED

Directory of Open Access Journals (Sweden)

Markus Kiderlen

2017-06-01

Full Text Available The Cavalieri method allows to estimate the volume of a compact object from area measurements in equidistant parallel planar sections. However, the spacing and thickness of sections can be quite irregular in applications. Recent publications have thus focused on the effect of random variability in section spacing, showing that the classical Cavalieri estimator is still unbiased when the stack of parallel planes is stationary, but that the existing variance approximations must be adjusted. The present paper considers the special situation, where the distances between consecutive section planes can be measured and thus where Cavalieri’s estimator can be replaced by a quadrature rule with randomized sampling points. We show that, under mild conditions, the trapezoid rule and Simpson’s rule lead to unbiased volume estimators and give simulation results that indicate that a considerable variance reduction compared to the generalized Cavalieri estimator can be achieved.

LINEAR2007, Linear-Linear Interpolation of ENDF Format Cross-Sections

International Nuclear Information System (INIS)

2007-01-01

1 - Description of program or function: LINEAR converts evaluated cross sections in the ENDF/B format into a tabular form that is subject to linear-linear interpolation in energy and cross section. The code also thins tables of cross sections already in that form. Codes used subsequently need thus to consider only linear-linear data. IAEA1311/15: This version include the updates up to January 30, 2007. Changes in ENDF/B-VII Format and procedures, as well as the evaluations themselves, make it impossible for versions of the ENDF/B pre-processing codes earlier than PREPRO 2007 (2007 Version) to accurately process current ENDF/B-VII evaluations. The present code can handle all existing ENDF/B-VI evaluations through release 8, which will be the last release of ENDF/B-VI. Modifications from previous versions: - Linear VERS. 2007-1 (JAN. 2007): checked against all ENDF/B-VII; increased page size from 60,000 to 600,000 points 2 - Method of solution: Each section of data is considered separately. Each section of File 3, 23, and 27 data consists of a table of cross section versus energy with any of five interpolation laws. LINEAR will replace each section with a new table of energy versus cross section data in which the interpolation law is always linear in energy and cross section. The histogram (constant cross section between two energies) interpolation law is converted to linear-linear by substituting two points for each initial point. The linear-linear is not altered. For the log-linear, linear-log and log- log laws, the cross section data are converted to linear by an interval halving algorithm. Each interval is divided in half until the value at the middle of the interval can be approximated by linear-linear interpolation to within a given accuracy. The LINEAR program uses a multipoint fractional error thinning algorithm to minimize the size of each cross section table

MINERvA - neutrino nucleus cross section experiment

CERN Multimedia

CERN. Geneva

2014-01-01

Recent results from MINERvA, a neutrino cross section experiment at Fermilab, are presented. MINERVA has the goal of providing precision results which will have important impact on oscillation experiments.  Initial data runs for muon neutrino and antineutrino beams of ~3.5 GeV have produced a large number of new results. This seminar will introduce the experiment and describe results for quasielastic, pion production, and inclusive cross sections.

Evaluation methods for neutron cross section standards

International Nuclear Information System (INIS)

Bhat, M.R.

1980-01-01

Methods used to evaluate the neutron cross section standards are reviewed and their relative merits, assessed. These include phase-shift analysis, R-matrix fit, and a number of other methods by Poenitz, Bhat, Kon'shin and the Bayesian or generalized least-squares procedures. The problems involved in adopting these methods for future cross section standards evaluations are considered, and the prospects for their use, discussed. 115 references, 5 figures, 3 tables

Exploring full cervical dilatation caesarean sections-A retrospective cohort study.

Science.gov (United States)

Corry, Edward M A; Ramphul, Meenakshi; Rowan, Ann M; Segurado, Ricardo; Mahony, Rhona M; Keane, Declan P

2018-05-01

The rate of caesarean sections at full cervical dilatation with their high risk of morbidity continues to rise mirroring the overall increase in caesarean section rates internationally. The objectives of this study were to determine the rate of full dilatation caesarean section in a tertiary referral unit and evaluate key labour, maternal and fetal factors potentially linked to those deliveries. We also assessed maternal and fetal morbidity at full dilatation sections. Where possible, these were compared with successful operative vaginal deliveries carried out in theatre to determine key differences. Retrospective cohort study. We reviewed the rate of full dilatation caesarean section over a 10-year period. We analysed deliveries (caesarean sections or operative vaginal deliveries) in single cephalic pregnancies ≥34 weeks with contemporaneously collected data from our unit's electronic database for 2015. The rate of full dilatation caesarean section increased by over a third in the ten-year period (56/6947 (0.80%) vs 92/7378 (1.24%), p = 0.01). Of 84 full dilatation caesarean sections who met the inclusion criteria, 63 (75%) were nulliparous and the mean maternal age was 33 (±5) years. Oxytocin was used in the second stage in less than half of second stage caesarean sections (22 out of a recorded 57, 38.6%). There were more fetal head malposition (occipito-posterior, or occipito-transverse) at full dilatation caesarean section compared to successful operative vaginal deliveries (41/46 (89.1%) vs 2/21 (9.5), p < 0.001). The rate of significant postpartum haemorrhage (defined as estimated blood loss ≥1000 ml) was similar in both full dilatation caesarean section and operative vaginal deliveries. There was no difference in the mean birthweight at full dilatation caesarean sections compared to operative vaginal delivery (3.88 kg (2.80-5.33 kg) vs 3.48 kg (1.53-4.40 kg)). There was no difference in neonatal morbidity. Fetal head malposition is

Scar Endometriosis Following Cesarean Section

Directory of Open Access Journals (Sweden)

Rüya Deveer

2012-04-01

CONCLUSION: Abdominal wall endometriosis frequently presents with cyclical pain during menstruation which is localised to a palpable mass in the abdominal wall especially in those who have had previous cesarean section. Complete surgical excision is curative.

Transverse section radionuclide scanning system

International Nuclear Information System (INIS)

Kuhl, D.E.; Edwards, R.Q.

1976-01-01

This invention provides a transverse section radionuclide scanning system for high-sensitivity quantification of brain radioactivity in cross-section picture format in order to permit accurate assessment of regional brain function localized in three dimensions. High sensitivity crucially depends on overcoming the heretofore known raster type scanning, which requires back and forth detector movement involving dead-time or partial enclosure of the scan field. Accordingly, this invention provides a detector array having no back and forth movement by interlaced detectors that enclose the scan field and rotate as an integral unit around one axis of rotation in a slip ring that continuously transmits the detector data by means of laser emitting diodes, with the advantages that increased amounts of data can be continuously collected, processed and displayed with increased sensitivity according to a suitable computer program. 5 claims, 11 figures

Large-spored Alternaria pathogens in section Porri disentangled

NARCIS (Netherlands)

Woudenberg, J H C; Truter, M; Groenewald, J Z; Crous, P W

The omnipresent fungal genus Alternaria was recently divided into 24 sections based on molecular and morphological data. Alternaria sect. Porri is the largest section, containing almost all Alternaria species with medium to large conidia and long beaks, some of which are important plant pathogens

Large-spored Alternaria pathogens in section Porri disentangled

NARCIS (Netherlands)

Woudenberg, J.H.C.; Truter, M.; Groenewald, J.Z.; Crous, P.W.

2014-01-01

The omnipresent fungal genus Alternaria was recently divided into 24 sections based on molecular and morphological data. Alternaria sect. Porri is the largest section, containing almost all Alternaria species with medium to large conidia and long beaks, some of which are important plant pathogens

238U subthreshold neutron induced fission cross section

International Nuclear Information System (INIS)

Difilippo, F.C.; Perez, R.B.; De Saussure, G.; Olsen, D.K.; Ingle, R.W.

1976-01-01

High resolution measurements of the 238 U neutron induced fission cross section are reported for neutron energies between 600 eV and 2 MeV. The average subthreshold fission cross section between 10 and 100 keV was found to be 44 +- 6 μb

Fission cross sections in the intermediate energy region

International Nuclear Information System (INIS)

Lisowski, P.W.; Gavron, A.; Parker, W.E.; Ullmann, J.L.; Balestrini, S.J.; Carlson, A.D.; Wasson, O.A.; Hill, N.W.

1991-01-01

Until recently there has been very little cross section data for neutron-induced fission in the intermediate energy region, primarily because no suitable neutron source has existed. At Los Alamos, the WNR target-4 facility provides a high-intensity source of neutrons nearly ideal for fission measurements extending from a fraction of a MeV to several hundred MeV. This paper summarizes the status of fission cross section data in the intermediate energy range (En > 30 MeV) and presents our fission cross section data for 235 U and 238 U compared to intranuclear cascade and statistical model predictions

Fission cross sections in the intermediate energy region

Energy Technology Data Exchange (ETDEWEB)

Lisowski, P.W.; Gavron, A.; Parker, W.E.; Ullmann, J.L.; Balestrini, S.J. (Los Alamos National Lab., NM (USA)); Carlson, A.D.; Wasson, O.A. (National Inst. of Standards and Technology, Gaithersburg, MD (USA)); Hill, N.W. (Oak Ridge National Lab., TN (USA))

1991-01-01

Until recently there has been very little cross section data for neutron-induced fission in the intermediate energy region, primarily because no suitable neutron source has existed. At Los Alamos, the WNR target-4 facility provides a high-intensity source of neutrons nearly ideal for fission measurements extending from a fraction of a MeV to several hundred MeV. This paper summarizes the status of fission cross section data in the intermediate energy range (En > 30 MeV) and presents our fission cross section data for {sup 235}U and {sup 238}U compared to intranuclear cascade and statistical model predictions.

An audit of intraoperative frozen section in Johor.

Science.gov (United States)

Khoo, J J

2004-03-01

A 4-year-review was carried out on intraoperative frozen section consultations in Sultanah Aminah Hospital, Johor Bahru. Two hundred and fifteen specimens were received from 79 patients in the period between January 1999 and December 2002. An average of 2.72 specimens per patient was received. The overall diagnostic accuracy was high, 97.56%. The diagnoses were deferred in 4.65% of the specimens. False positive diagnoses were made in 3 specimens (1.46%) and false negative diagnoses in 2 specimens (0.98%). This gave an error rate of 2.44%. The main cause of error was incorrect interpretation of the pathologic findings. In the present study, frozen sections showed good sensitivity (97.98%) and specificity (97.16%). Despite its limitations, frozen section is still generally considered to be an accurate mode of intraoperative consultation to assist the surgeon in deciding the best therapeutic approach for his patient at the operating table. The use of frozen section with proper indications was cost-effective as it helped lower the number of reoperations. An audit of intraoperative frozen section from time to time serves as part of an ongoing quality assurance program and should be recommended where the service is available.

Short Nissl staining for incubated cryostat sections of the brain.

Science.gov (United States)

Lindroos, O F

1991-01-01

Nissl stain often binds poorly to cryostat sections which have been incubated in solutions of radiolabeled ligands. Such incubation is used in receptor autoradiography of the brain when using the in vitro method. We have developed a rapid (16 min) modification of Nissl staining for sections that bind stain poorly, e.g., incubated sections. The method stains well sections which cannot be stained with other rapid Nissl staining methods.

Inclined Bodies of Various Cross Sections at Supersonic Speeds

Science.gov (United States)

Jorgensen, Leland H.

1958-01-01

To aid in assessing effects of cross-sectional shape on body aerodynamics, the forces and moments have been measured for bodies with circular, elliptic, square, and triangular cross sections at Mach numbers 1.98 and 3.88. Results for bodies with noncircular cross sections have been compared with results for bodies of revolution having the same axial distribution of cross-sectional area (and, thus, the same equivalent fineness ratio). Comparisons have been made for bodies of fineness ratios 6 and 10 at angles of attack from 0 deg to about 20 deg and for Reynolds numbers, based on body length, of 4.0 x 10(exp 6) and 6.7 x 10(exp 6). The results of this investigation show that distinct aerodynamic advantages can be obtained by using bodies with noncircular cross sections. At certain angles of bank, bodies with elliptic, square, and triangular cross sections develop considerably greater lift and lift-drag ratios than equivalent bodies of revolution. For bodies with elliptic cross sections, lift and pitching-moment coefficients can be correlated with corresponding coefficients for equivalent circular bodies. It has been found that the ratios of lift and pitching-moment coefficients for an elliptic body to those for an equivalent circular body are practically constant with change in both angle of attack and Mach number. These lift and moment ratios are given very accurately by slender-body theory. As a result of this agreement, the method of NACA Rep. 1048 for computing forces and moments for bodies of revolution has been simply extended to bodies with elliptic cross sections. For the cases considered (elliptic bodies of fineness ratios 6 and 10 having cross-sectional axis ratios of 1.5 and 2), agreement of theory with experiment is very good. As a supplement to the force and moment results, visual studies of the flow over bodies have been made by use of the vapor-screen, sublimation, and white-lead techniques. Photographs from these studies are included in the report.

Dosimetry and Calibration Section

International Nuclear Information System (INIS)

Otto, T.

1999-01-01

The Dosimetry and Calibration Section fulfils two tasks within CERN's Radiation Protection Group: the Individual Dosimetry Service monitors more than 5000 persons potentially exposed to ionizing radiation on the CERN sites, and the Calibration Laboratory verifies throughout the year, at regular intervals, over 1000 instruments, monitors, and electronic dosimeters used by RP Group. The establishment of a Quality Assurance System for the Individual Dosimetry Service, a requirement of the new Swiss Ordinance for personal dosimetry, put a considerable workload on the section. Together with an external consultant it was decided to identify and then describe the different 'processes' of the routine work performed in the dosimetry service. The resulting Quality Manual was submitted to the Federal Office for Public Health in Bern in autumn. The CERN Individual Dosimetry Service will eventually be officially endorsed after a successful technical test in March 1999. On the technical side, the introduction of an automatic development machine for gamma films was very successful. It processes the dosimetric films without an operator being present, and its built-in regeneration mechanism keeps the concentration of the processing chemicals at a constant level

A "Projective" Test of the Golden Section Hypothesis.

Science.gov (United States)

Lee, Chris; Adams-Webber, Jack

1987-01-01

In a projective test of the golden section hypothesis, 24 high school students rated themselves and 10 comic strip characters on basis of 12 bipolar constructs. Overall proportion of cartoon figures which subjects assigned to positive poles of constructs was very close to golden section. (Author/NB)

Positron induced scattering cross sections for hydrocarbons relevant to plasma

Science.gov (United States)

Singh, Suvam; Antony, Bobby

2018-05-01

This article explores positron scattering cross sections by simple hydrocarbons such as ethane, ethene, ethyne, propane, and propyne. Chemical erosion processes occurring on the surface due to plasma-wall interactions are an abundant source of hydrocarbon molecules which contaminate the hydrogenic plasma. These hydrocarbons play an important role in the edge plasma region of Tokamak and ITER. In addition to this, they are also one of the major components in the planetary atmospheres and astrophysical mediums. The present work focuses on calculation of different positron impact interactions with simple hydrocarbons in terms of the total cross section (Qtot), elastic cross section (Qel), direct ionization cross section (Qion), positronium formation cross section (Qps), and total ionization cross section (Qtion). Knowing that the positron-plasma study is one of the trending fields, the calculated data have diverse plasma and astrophysical modeling applications. A comprehensive study of Qtot has been provided where the inelastic cross sections have been reported for the first time. Comparisons are made with those available from the literature, and a good agreement is obtained with the measurements.

Applying Lean Six Sigma methodology to reduce cesarean section rate.

Science.gov (United States)

Chai, Ze-Ying; Hu, Hua-Min; Ren, Xiu-Ling; Zeng, Bao-Jin; Zheng, Ling-Zhi; Qi, Feng

2017-06-01

This study aims to reduce cesarean section rate and increase rate of vaginal delivery. By using Lean Six Sigma (LSS) methodology, the cesarean section rate was investigated and analyzed through a 5-phase roadmap consisting of Define, Measure, Analyze, Improve, and Control. The principal causes of cesarean section were identified, improvement measures were implemented, and the rate of cesarean section before and after intervention was compared. After patients with a valid medical reason for cesarean were excluded, the main causes of cesarean section were maternal request, labor pain, parturient women assessment, and labor observation. A series of measures was implemented, including an improved parturient women assessment system, strengthened pregnancy nutrition guidance, implementation of painless labor techniques, enhanced midwifery team building, and promotion of childbirth-assist skills. Ten months after introduction of the improvement measures, the cesarean section rate decreased from 41.83% to 32.00%, and the Six Sigma score (ie, Z value) increased from 1.706 to 1.967 (P < .001). LSS is an effective way to reduce the rate of cesarean section. © 2016 John Wiley & Sons, Ltd.

Neutron standard cross sections in reactor physics - Need and status

International Nuclear Information System (INIS)

Carlson, A.D.

1990-01-01

The design and improvement of nuclear reactors require detailed neutronics calculations. These calculations depend on comprehensive libraries of evaluated nuclear cross sections. Most of the cross sections that form the data base for these evaluations have been measured relative to neutron cross-section standards. The use of these standards can often simplify the measurement process by eliminating the need for a direct measurement of the neutron fluence. The standards are not known perfectly, however; thus the accuracy of a cross-section measurement is limited by the uncertainty in the standard cross section relative to which it is measured. Improvements in a standard cause all cross sections measured relative to that standard to be improved. This is the reason for the emphasis on improving the neutron cross-section standards. The continual process of measurement and evaluation has led to improvements in the accuracy and range of applicability of the standards. Though these improvements have been substantial, this process must continue in order to obtain the high-quality standards needed by the user community

Evaluation of kerma in carbon and the carbon cross sections

International Nuclear Information System (INIS)

Axton, E.J.

1992-02-01

A preliminary simultaneous least squares fit to measurements of kerma in carbon, and carbon cross sections taken from the ENDF/B-V file was carried out. In the calculation the shapes of the total cross section and the various partial cross sections were rigid but their absolute values were allowed to float in the fit within the constraints of the ENDF/B-V uncertainties. The construction of the ENDF/B-V file imposed improbable shapes, particularly in the case of the (12)C(n,n'3(alpha)) reaction, which were incompatible with direct measurements of kerma and of the reaction cross sections. Consequently a new evaluation of the cross section data became necessary. Since the available time was limited the new evaluation concentrated particularly on those aspects of the ENDF/B-V carbon file which would have most impact on kerma calculations. Following the new evaluation of cross sections new tables of kerma factors were produced. Finally, the simultaneous least squares fit to measurements of kerma and the new cross section file was repeated

single-top quark production cross section using the ATLAS detector

CERN Document Server

Feng, Cunfeng; The ATLAS collaboration

2014-01-01

Measurements of single top-quark production cross section in proton proton collisions at 7 and 8 TeV are presented. In the leading order process, a W boson is exchanged in the t-channel. For this process, for the first time a fiducial cross section measured within the detector acceptance is presented and the modelling uncertainty when extrapolating to the total inclusive cross section is assessed with a large number of different Monte Carlo generators. The result is in good agreement with the most up-to-date theory predictions. Furthermore, the single top-quark and anti-top total production cross sections, their ratio, as well as a measurement of the inclusive production cross section is presented. Differential cross sections are measured as a function of the transverse momentum and the absolute value of the rapidity of top and anti-top quarks. In addition, a measurement of the production cross section of a single top quark in association with a W boson is presented. The s-channel production is explored and l...

Effects of cross-section on mechanical properties of Au nanowire

Energy Technology Data Exchange (ETDEWEB)

Vazinishayan, Ali; Yang, Shuming, E-mail: shuming.yang@mail.xjtu.edu.cn; Duongthipthewa, Anchalee; Wang, Yiming [State Key Laboratory for manufacturing system engineering, Xi’an Jiaotong University, Xi’an, 710049 (China)

2016-02-15

The aim of this paper is study of the effects of multiple cross-section of Au nanowire on mechanical properties. Different cross-section models of Au nanowires including circular, hexagonal, pentagonal and rectangular were simulated by finite element modeling using ABAQUS. In this study, the bending technique was applied so that both ends of the model were clamped with mid-span under loading condition. The cross-sections had the length of 400 nm and the diameter of 40 nm, except the circular cross-section while the rest of the cross-sections had an equivalent diameter. Von Misses stresses distribution were used to define the stress distribution in the cross-section under loading condition, and elastic deformation was analyzed by the beam theory. The results disclosed that the circular and the rectangular models had highest and lowest strengths against plastic deformation, respectively.

Design of injector section for SPring-8 linac

International Nuclear Information System (INIS)

Yoshikawa, Hiroshi; Nakamura, Naoki; Mizuno, Akihiko; Suzuki, Shinsuke; Hori, Toshihiko; Yanagida, Kenichi; Mashiko, Katsuo; Yokomizo, Hideaki

1993-07-01

In the SPring-8, we are planning to use positrons in order to increase the beam life time in the storage-ring. For the injector linac, though high current beam production to yield positrons is alternative with accurate low current beam production for commissioning, we designed the injector section to achieve both of the high current mode and the low current mode. In this paper, overview of some simulation codes for the design of electron accelerators are described and the calculation results by TRACE for the injector section of the linac are shown. That is useful not only for the design of machines but for the selection of sensitive parameters to establish the good beam quality. Now the injector section, which is settled at Tokai Establishment, is arranged for the case of the performance check of the electron gun. And we present that the layout of this section is needed to be rearranged for the high current mode operation. (author)

Effects of Music during Multiple Cesarean Section Delivery.

Science.gov (United States)

Handan, Eren; Sahiner, Nejla Canbulat; Bal, Meltem Demirgoz; Dissiz, Melike

2018-03-01

This experimental study was conducted to determine the level of anxiety in women undergoing multiple cesarean section. Sixty multiple cesarean section referrals were randomly assigned to either the experimental or control groups. Data was collected at the Karaman Public Health Hospital in Turkey, from June 2015 to June 2016. Songs chosen earlier by the patients were played during the cesarean section procedure for the experimental group. The control group was studied without music. Data was collected using a questionnaire form, and Visual Analogue Scale (VAS) was used to determine the anxiety levels. The t-test and chi-square test were used to analyse statistically significant differences between the groups. The VAS scores before and during the procedure showed significantly lower scores for the experimental group, compared to the control group (p<0.05). Music therapy reduces the physiological and cognitive responses of anxiety in patients undergoing multiple cesarean section, and can be used in the clinical practice.

Positron total scattering cross-sections for alkali atoms

Science.gov (United States)

Sinha, Nidhi; Singh, Suvam; Antony, Bobby

2018-01-01

Positron-impact total scattering cross-sections for Li, Na, K, Rb, Cs and Fr atoms are calculated in the energy range from 5-5000 eV employing modified spherical complex optical potential formalism. The main aim of this work is to apply this formalism to the less studied positron-target collision systems. The results are compared with previous theoretical and experimental data, wherever available. In general, the present data show overall agreement and consistency with other results. Furthermore, we have done a comparative study of the results to investigate the effect of atomic size on the cross-sections as we descend through the group in the periodic table. We have also plotted a correlation graph of the present total cross-sections with polarizability and number of target electrons. The two correlation plots confirm the credibility and consistency of the present results. Besides, this is the first theoretical attempt to report positron-impact total cross-sections of alkali atoms over such a wide energy range.

Invisible anti-cloak with elliptic cross section using phase complement

International Nuclear Information System (INIS)

Yang Yu-Qi; Zhang Min; Yue Jian-Xiang

2011-01-01

Based on the theory of phase complement, an anti-cloak with circular cross section can be made invisible to an object outside its domain. As the cloak with elliptic cross section is more effective to make objects invisible than that with circular cross section, a scaled coordinate system is proposed to design equivalent materials of invisible anti-cloak with elliptic cross section using phase complement. The cloaks with conventional dielectric and double negative parameters are both simulated with the geometrical transformations. The results show that the cloak with elliptic cross section through phase complement can effectively hide the outside objects. (classical areas of phenomenology)

Using the automized system ''section'' to forecast velocity sections using data on borehole velocity measurement and seismic field prospecting

Energy Technology Data Exchange (ETDEWEB)

Dorman, M.I.; Gein, F.F.; Zubairov, F.B.

1981-01-01

A system of automated processing of seismic data is examined which makes it possible to set up rate functions at arbitrary points of a seismic prospecting section or at points conciding with boreholes in which rate measurements have not been completed. The basis for the forecasting method is data on seismic well logging investigations, seismic prospecting and some indirect observations on sections. The bases of a procedure realizing a forecasting method are set forth, as are those requirements which satisfy the system as a whole. The results of using the ''section'' system in a terrestrial section of Western Siberia are set forth.

PRES 2012 special section

DEFF Research Database (Denmark)

Klemeš, Jiří Jaromír; Varbanov, Petar Sabev; Wang, Qiuwang

2013-01-01

This Special Section provides introduction to the 15th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2012). In this editorial introduction, the editors are highlighting the individual articles included in this issue and discussing...... the main points. The main areas of this issue can be summarised as: Process Integration for Energy Saving, Integrating Renewable Energy Sources and Energy Optimisation issues....

Conodont dating of some Telychian (Silurian sections in Estonia

Directory of Open Access Journals (Sweden)

Männik, Peep

2008-09-01

Full Text Available Several Telychian–Sheinwoodian strata exposed in Estonia are precisely dated using conodont biostratigraphy. The beds in the Valgu-1 section correspond to the uppermost Distomodus staurognathoides and Pterospathodus eopennatus ssp. n. 1 zones. In the Valgu-2 and Valgu-3 sections only the P. eopennatus ssp. n. 1 Zone is exposed. The strata in the Velise-Kõrgekalda section correspond to the Lower subzone of the P. amorphognathoides angulatus Zone. Marlstones in the Jädivere section are assigned to the P. a. lennarti Zone. In the Avaste section part of the P. a. lithuanicus Zone is exposed. On the Saastna Peninsula two stratigraphical intervals, the lower corresponding to the Upper subzone of the P. a. amorphognathoides Zone and the upper to the Upper Kockelella ranuliformis Zone, crop out along the shoreline. In Saastna the exposed strata are separated by a covered interval corresponding to five conodont zones, from the Lower Pseudooneotodus bicornis Zone to the Lower K. ranuliformis Zone.

Damage energy and displacement cross sections: survey and sensitivity

International Nuclear Information System (INIS)

Doran, D.G.; Parkin, D.M.; Robinson, M.T.

1976-10-01

Calculations of damage energy and displacement cross sections using the recommendations of a 1972 IAEA Specialists' Meeting are reviewed. The sensitivity of the results to assumptions about electronic energy losses in cascade development and to different choices respecting the nuclear cross sections is indicated. For many metals, relative uncertainties and sensitivities in these areas are sufficiently small that adoption of standard displacement cross sections for neutron irradiations can be recommended

Cross section recondensation method via generalized energy condensation theory

International Nuclear Information System (INIS)

Douglass, Steven; Rahnema, Farzad

2011-01-01

Highlights: → A new method is presented which corrects for core environment error from specular boundaries at the lattice cell level. → Solution obtained with generalized energy condensation provides improved approximation to the core level fine-group flux. → Iterative recondensation of the cross sections and unfolding of the flux provides on-the-fly updating of the core cross sections. → Precomputation of energy integrals and fine-group cross sections allows for easy implementation and efficient solution. → Method has been implemented in 1D and shown to correct the environment error, particularly in strongly heterogeneous cores. - Abstract: The standard multigroup method used in whole-core reactor analysis relies on energy condensed (coarse-group) cross sections generated from single lattice cell calculations, typically with specular reflective boundary conditions. Because these boundary conditions are an approximation and not representative of the core environment for that lattice, an error is introduced in the core solution (both eigenvalue and flux). As current and next generation reactors trend toward increasing assembly and core heterogeneity, this error becomes more significant. The method presented here corrects for this error by generating updated coarse-group cross sections on-the-fly within whole-core reactor calculations without resorting to additional cell calculations. In this paper, the fine-group core flux is unfolded by making use of the recently published Generalized Condensation Theory and the cross sections are recondensed at the whole-core level. By iteratively performing this recondensation, an improved core solution is found in which the core-environment has been fully taken into account. This recondensation method is both easy to implement and computationally very efficient because it requires precomputation and storage of only the energy integrals and fine-group cross sections. In this work, the theoretical basis and development

Electron-collision cross sections for iodine

International Nuclear Information System (INIS)

Zatsarinny, O.; Bartschat, K.; Garcia, G.; Blanco, F.; Hargreaves, L.R.; Jones, D.B.; Murrie, R.; Brunton, J.R.; Brunger, M.J.; Hoshino, M.; Buckman, S.J.

2011-01-01

We present results from a joint experimental and theoretical study of elastic electron scattering from atomic iodine. The experimental results were obtained by subtracting known cross sections from the measured data obtained with a pyrolyzed mixed beam containing a variety of atomic and molecular species. The calculations were performed using both a fully relativistic Dirac B-spline R-matrix (close-coupling) method and an optical model potential approach. Given the difficulty of the problem, the agreement between the two sets of theoretical predictions and the experimental data for the angle-differential and the angle-integrated elastic cross sections at 40 eV and 50 eV is satisfactory.

SSCL RFQ-DTL Matching Section instrumentation

International Nuclear Information System (INIS)

Datte, P.; Aielo, R.; Hayworth, M.

1993-11-01

A description of the SSCL RFQ-DTL Matching Section instrumentation is presented with emphasis on design issues and early instrumentation commissioning results. The H - beam energy through the RFQ-DTL matching section is 2.5 MeV, the beam current is 27 mA with a pulse width of 35 Its. The typical beam diameter is 3 mm. The instrumentation consists of three beam position monitors (BPM), a wire scanner, beam loss monitors (BLM), a slit and collector emittance measurement unit (EMU), a current toroid, and a Faraday cup. The instruments were designed to accommodate high current densities, have a large dynamic range with moderate bandwidths, and fit congested spaces

Cesarean section imprints cord blood immune cell distributions

DEFF Research Database (Denmark)

Thysen, Anna Hammerich; Larsen, Jeppe Madura; Rasmussen, Mette Annelie

2014-01-01

Immune programming in early life may affect the risk of developing immune-related diseases later in life. Children born by cesarean section seem to be at higher risk of asthma, allergic rhinitis, and type-1 diabetes. We hypothesized that delivery by cesarean section may affect immune maturation i...

pp production cross sections and the constraint method

International Nuclear Information System (INIS)

Anjos, J.C.; Santoro, A.F.S.; Souza, M.H.G.

1983-01-01

A method of constructing production cross sections that satisfy the constraints represented by the first few moments is shown to give an excellent account of the data when applied to the high energy pp production cross section ν sub(n) (s) plotted as functions of n. (Author) [pt

Total Cross Sections at High Energies An update

CERN Document Server

Fazal-e-Aleem, M; Alam, Saeed; Qadee-Afzal, M

2002-01-01

Current and Future measurements for the total cross sections at E-811, PP2PP, CSM, FELIX and TOTEM have been analyzed using various models. In the light of this study an attempt has been made to focus on the behavior of total cross section at very high energies.

75 FR 64773 - Study Required by Section 989G(b) of the Dodd-Frank Act Regarding Compliance With Section 404(b...

Science.gov (United States)

2010-10-20

... from the auditor attestation requirement in Section 404(b) would encourage companies to list on... auditor attestation requirement with respect to a company's internal control over financial reporting. The... auditor attest to management's assessment under Section 404(b) for issuers with a public float between $75...

Production technique for thin undecalcified bone sections suitable for autoradiography

International Nuclear Information System (INIS)

Farnham, J.E.; Schlenker, R.A.

1985-01-01

The production of thin bone sections using power-driven grinding equipment is described. With such equipment, sections can be readily ground to thicknesses between 30 and 40 μm in a rapid and controlled fashion. The yield of usable sections is nearly 100%

Neutron cross sections for fusion

International Nuclear Information System (INIS)

Haight, R.C.

1979-10-01

First generation fusion reactors will most likely be based on the 3 H(d,n) 4 He reaction, which produces 14-MeV neutrons. In these reactors, both the number of neutrons and the average neutron energy will be significantly higher than for fission reactors of the same power. Accurate neutron cross section data are therefore of great importance. They are needed in present conceptual designs to calculate neutron transport, energy deposition, nuclear transmutation including tritium breeding and activation, and radiation damage. They are also needed for the interpretation of radiation damage experiments, some of which use neutrons up to 40 MeV. In addition, certain diagnostic measurements of plasma experiments require nuclear cross sections. The quality of currently available data for these applications will be reviewed and current experimental programs will be outlined. The utility of nuclear models to provide these data also will be discussed. 65 references

Polynomial parameterized representation of macroscopic cross section for PWR reactor

International Nuclear Information System (INIS)

Fiel, Joao Claudio B.

2015-01-01

The purpose of this work is to describe, by means of Tchebychev polynomial, a parameterized representation of the homogenized macroscopic cross section for PWR fuel element as a function of soluble boron concentration, moderator temperature, fuel temperature, moderator density and 235 U 92 enrichment. Analyzed cross sections are: fission, scattering, total, transport, absorption and capture. This parameterization enables a quick and easy determination of the problem-dependent cross-sections to be used in few groups calculations. The methodology presented here will enable to provide cross-sections values to perform PWR core calculations without the need to generate them based on computer code calculations using standard steps. The results obtained by parameterized cross-sections functions, when compared with the cross-section generated by SCALE code calculations, or when compared with K inf , generated by MCNPX code calculations, show a difference of less than 0.7 percent. (author)

Review of Section XI inservice inspection program effectiveness

International Nuclear Information System (INIS)

Cook, J.F. Sr.

1993-08-01

To evaluate the effectiveness of Section XI, Division 1, open-quotes Rules for Inservice Inspection of Nuclear Power Plant Components,close quotes of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, searches were performed of the Licensing Event Report and Nuclear Plant Reliability Data System computerized data bases, and a review was made of inservice inspection summary reports. It was found that the Section XI examinations and tests detect flaws in welds and plant components and result in subsequent corrective action. This study also shows that the format and topics of information provided in Section XI-prescribed inservice inspection summary reports vary widely

Review of Section XI inservice inspection program effectiveness

Energy Technology Data Exchange (ETDEWEB)

Cook, J.F. Sr.

1993-08-01

To evaluate the effectiveness of Section XI, Division 1, {open_quotes}Rules for Inservice Inspection of Nuclear Power Plant Components,{close_quotes} of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, searches were performed of the Licensing Event Report and Nuclear Plant Reliability Data System computerized data bases, and a review was made of inservice inspection summary reports. It was found that the Section XI examinations and tests detect flaws in welds and plant components and result in subsequent corrective action. This study also shows that the format and topics of information provided in Section XI-prescribed inservice inspection summary reports vary widely.

Poster - 18: New features in EGSnrc for photon cross sections

Energy Technology Data Exchange (ETDEWEB)

Ali, Elsayed; Mainegra-Hing, Ernesto; Rogers, David W.O. [The Ottawa Hospital Cancer Centre, National Research Council Canada, Carleton University (Canada)

2016-08-15

Purpose: To implement two new features in the EGSnrc Monte Carlo system. The first is an option to account for photonuclear attenuation, which can contribute a few percent to the total cross section at the higher end of the energy range of interest to medical physics. The second is an option to use exact NIST XCOM photon cross sections. Methods: For the first feature, the photonuclear total cross sections are generated from the IAEA evaluated data. In the current, first-order implementation, after a photonuclear event, there is no energy deposition or secondary particle generation. The implementation is validated against deterministic calculations and experimental measurements of transmission signals. For the second feature, before this work, if the user explicitly requested XCOM photon cross sections, EGSnrc still used its own internal incoherent scattering cross sections. These differ by up to 2% from XCOM data between 30 keV and 40 MeV. After this work, exact XCOM incoherent scattering cross sections are an available option. Minor interpolation artifacts in pair and triplet XCOM cross sections are also addressed. The default for photon cross section in EGSnrc is XCOM except for the new incoherent scattering cross sections, which have to be explicitly requested. The photonuclear, incoherent, pair and triplet data from this work are available for elements and compounds for photon energies from 1 keV to 100 GeV. Results: Both features are implemented and validated in EGSnrc.Conclusions: The two features are part of the standard EGSnrc distribution as of version 4.2.3.2.

Acute parotiditis after cesarean section; case report

OpenAIRE

Cristina Moisei; Romina M. Sima; Liana Pleş

2017-01-01

The enlargement of the parotid gland develops in inflammatory or stenotic conditions but after Cesarean section the symptomatology is unusual. A 38 year old patient with no obstetrical history referred to our clinic for pregnancy, which followed our national program of prenatal care. The outcome of the pregnancy was favorable for both mother and fetus. During labor the fetus developed bradycardia and the patient delivered by Cesarean section a 3400 g baby-boy with 8 Apgar Score; the anesthesi...

From ZZ to ZH: How Low Can These Cross Sections Go or Everybody, Let's Cross Section Limbo

International Nuclear Information System (INIS)

Strauss, Emanuel Alexandre

2009-01-01

We report on two searches performed at the D0 detector at the Fermi National Laboratory. The first is a search for Z di-boson production with a theoretical cross section of 1.4 pb. The search was performed on 2.6 fb -1 of data and contributed to the first observation of ZZ production at a hadron collider. The second is a search for a low mass Standard Model Higgs in 4.2 fb -1 of data. The Higgs boson is produced in association with a Z boson where the Higgs decays hadronically and the Z decays to two leptons. The ZZ search was performed in both the di-electron and di-muon channels. For the ZH search, we will focus on the muonic decays where we expanded the traditional coverage by considering events in which one of the two muons fails the selection requirement, and is instead reconstructed as an isolated track. We consider Higgs masses between 100 and 150 GeV, with theoretical cross sections ranging from 0.17 to 0.042 pb, and set upper limits on the ZH production cross-section at 95% confidence level

Information section of evolution of new technology

Directory of Open Access Journals (Sweden)

Straka Martin

2001-12-01

Full Text Available When the new technology is developed, the large amount of information is needed, at the beginning, also through development and there is large amount of data, information at the output, which create a manual, design procedure of the new technology. Evolution the new technology goes out from one primary original idea, or by the help of sectional or piecemeal solution come near into the bargain what we want to achieve research. Attempts and collection of information get in possession to results not only after information section, but also after technical - technological section. Another important of information source is quantity data receives from books, magazines, old planning documentation and nowadays also from Internet. This article contains the information gaining and the sources, which we have in disposal and which are necessary for developing the new technology from primary data at the beginning to data, which are gathered through development.

Water Chemistry Section: progress report (1981-82)

International Nuclear Information System (INIS)

Dharwadkar, S.R.; Ramshesh, V.

1983-01-01

The activities of the Water Chemistry Section of the Bhabha Atomic Research Centre (BARC), Bombay, during the years 1981 and 1982 are reported in the form of individual summaries. The research activities of the Section cover the following areas: (1) chemistry and thermodynamics of nuclear materials, (2) crystal structure of organo-metallic complexes using X-ray diffraction, (3) thermophysical and phase transition studies, (4) solid state chemistry and thermochemical studies, (5) water and steam chemistry of heavy water plants and phwr type reactors, and (6) uranium isotope exchange studies. A survey is also given of: (i) the Section's participation in advisory and consultancy services in nuclear and thermal power stations, (ii) training activities, and (iii) assistance in chemical analysis by various techniques to other units of BARC and outside agencies. A list of publications and lectures by the staff during the report period is included. (M.G.B.)

Photoproton cross section for /sup 19/F

Energy Technology Data Exchange (ETDEWEB)

Tsubota, H [Tohoku Univ., Sendai (Japan). Coll. of General Education; Kawamura, N; Oikawa, S; Uegaki, J I

1975-02-01

Proton energy spectra have been measured at 90/sup 0/ for the /sup 19/F(e,e'p)/sup 18/O reaction in the giant resonance region. The (..gamma..,p/sub 0/) and (..gamma..,p/sub 1/) differential cross sections are extracted from the proton energy spectra by using virtual-photon spectra. The integrated differential cross section of the (..gamma..,p/sub 0/) and (..gamma..,p/sub 1/) reactions are 1.80+-0.27 and 0.50+-0.45 MeV-mb/sr, respectively. The results are discussed with the shell model theory by comparing with the (..gamma..,p/sub 0/) cross section of the neighboring 4n-nucleus /sup 20/Ne. A significant increase of the proton yield leaving the non-ground states is found at 25 MeV of the incident electron energy. This is discussed in terms of the core excitation effect.

Evaluation of cross sections for neutron-induced reactions in sodium

International Nuclear Information System (INIS)

Larson, D.C.

1980-09-01

An evaluation of the neutron-induced cross sections of 23 Na has been done for the energy range from 10 -5 eV to 20 MeV. All significant cross sections are given, including differential cross sections for production of gamma rays. The recommended values are based on experimental data where available, and use results of a consistent model code analysis of available data to predict cross sections where there are no experimental data. This report describes the evaluation that was submitted to the Cross Section Evaluation Working Group (CSEWG) for consideration as a part of the Evaluated Nuclear Data File, Version V, and subsequently issued as MAT 1311. 126 references, 130 figures, 14 tables

Differential bremsstrahlung and pair production cross sections at high energies

International Nuclear Information System (INIS)

Olsen, Haakon A.

2003-01-01

Detailed differential cross sections for high energy bremsstrahlung and pair production are derived with specific attention to the differences between the two processes, which are considerable. For the integrated cross sections, which are the only cross sections specifically known until now, the final state integration theorem guarantees that the exact cross section formulas can be exchanged between bremsstrahlung and pair production by the same substitution rules as for the Born-approximation Bethe-Heitler cross sections, for any amount of atomic screening. In fact the theorem states that the Coulomb corrections to the integrated bremsstrahlung and pair production cross sections are identical for any amount of screening. The analysis of the basic differential cross sections leads to fundamental physical differences between bremsstrahlung and pair production. Coulomb corrections occur for pair production in the strong electric field of the atom for 'large' momentum transfer of the order of mc. For bremsstrahlung, on the other hand, the Coulomb corrections take place at a 'large' distance from the atom of the order of ((ℎ/2π)/mc)ε, with a 'small' momentum transfer mc/ε, where ε is the initial electron energy in units of mc 2 . And the Coulomb corrections can be large, of the order of larger than (Z/137) 2 , which is considerably larger than the integrated cross section corrections

Dystocia as a cause of untimely cesarean section.

Science.gov (United States)

Djurić, Janko; Arsenijević, Slobodan; Banković, Dragic; Protrka, Zoran; Sorak, Marija; Dimitrijević, Aleksandra; Tanasković, Irena

2012-07-01

One of the most frequent indications for cesarean section is dystocia. It is impossible to predict, difficult to identify and coincident with the rapid expiry of the expected time, so it is important to point out some mistakes in expecting vaginal delivery. The aim of this study was to examine the frequency and the length of dystocia-related cesarean delivery, as well as the vitality of the newborn immediately after birth. A prospective 3-year study was conducted including a total number of 6470 deliveries regardless of whether they were completed using cesarean section after an unsuccessful attempt of spontaneous vaginal delivery or not. The Apgar score, a proved useful tool for the assessment of the vitality of newborn children in the first minute, was used. On the basis of the established indications, 653 (10.10%) of deliveries were completed using cesarean section. Dystocia was the third most common indication for cesarean section (16.38%). Deliveries in which dystocia was established as a diagnosis lasted much longer (p = 0.030) which resulted in weaker vitality of newborn children (p = 0.000) compared to the deliveries ended by spontaneous vaginal delivery. This study shows that deliveries caused by dystocia last much longer and newborn children are of weaker vitality compared to other deliveries caused not by dystocia. Decisions concerning cesarean section must be made in a timely fashion.

Terahertz radar cross section measurements

DEFF Research Database (Denmark)

Iwaszczuk, Krzysztof; Heiselberg, Henning; Jepsen, Peter Uhd

2010-01-01

We perform angle- and frequency-resolved radar cross section (RCS) measurements on objects at terahertz frequencies. Our RCS measurements are performed on a scale model aircraft of size 5-10 cm in polar and azimuthal configurations, and correspond closely to RCS measurements with conventional radar...

Compression and flexural properties of finger jointed mango wood sections

OpenAIRE

Kumar, V.S Kishan; Sharma, C.M; Gupta, Sachin

2014-01-01

In this paper, an attempt was made to assess the effectiveness of finger jointing in utilising mango wood sections for various end uses like furniture. The study was based on the estimation of Modulus of elasticity and Modulus of rupture under static bending and Maximum Crushing Stress and Modulus of elasticity under compression parallel to grain of finger jointed sections and comparing them with the values measured for clear wood sections from the same lot. For joining the sections, the Poly...

Learning of Cross-Sectional Anatomy Using Clay Models

Science.gov (United States)

Oh, Chang-Seok; Kim, Ji-Young; Choe, Yeon Hyeon

2009-01-01

We incorporated clay modeling into gross anatomy and neuro-anatomy courses to help students understand cross-sectional anatomy. By making clay models, cutting them and comparing cut surfaces to CT and MR images, students learned how cross-sectional two-dimensional images were created from three-dimensional structure of human organs. Most students…

77 FR 321 - Section 4(f) Policy Paper

Science.gov (United States)

2012-01-04

...] Section 4(f) Policy Paper AGENCY: Federal Highway Administration (FHWA), DOT. ACTION: Notice; Request for comments. SUMMARY: This is a notice and request for comments on a draft Section 4(f) Policy Paper that will... Paper is available for download and public inspection under the docket number noted above at the Federal...

Q.C.D. estimates of hadronic cross sections

International Nuclear Information System (INIS)

Navelet, H.; Peschanski, R.

1983-03-01

Estimates for hadron-hadron cross-sections are made using the leading log approximation of Q.C.D. The rise of the total inelastic pp cross-sections at high energy is reproduced, thanks to the competition between the small parton-parton interaction and the large multiplicity of gluons predicted by Q.C.D

Squalene aspiration pneumonia : thin-section CT and histopathologic findings

International Nuclear Information System (INIS)

Lee, Jin Seong; Gong, Gyung Yub; Lim, Tae Hwan

1998-01-01

The purpose of this study was to describe the thin-section computed tomography (CT) findings and histopathologic findings of squalene aspiration pneumonia. Thin-section CT scans were obtained from nine patients with proven exogenous lipoid pneumonia resulting from aspiration of squalene (derived from shark liver oil). The condition was diagnosed by biopsy (n=3), bronchoalveolar lavage(n=4), or sputum cytology and clinical history (n=2) of squalene use was confirmed in all patients. Specimens of transbronchial lung biopsy were also reviewed and compared with thin-section CT findings. On the basis of these results, we concluded that squalene aspiration pneumonia can be reliably diagnosed by thin-section CT findings particularly when the appropriate history is known. (author). 19 refs., 3 figs

Cross section measurements of fissile nuclei for slow neutrons; Mesures de sections efficaces de noyaux fissiles pour les neutrons lents

Energy Technology Data Exchange (ETDEWEB)

Auclair, J M; Hubert, P; Joly, R; Vendryes, G; Jacrot, B; Netter, F [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Galula, M [Centre National de la Recherche Scientifique (CNRS), 91 - Gif-sur-Yvette (France)

1955-07-01

It presents the experimental measurements of cross section of fissile nuclei for slow neutrons to improve the understanding of some heavy nuclei of great importance in the study of nuclear reactors. The different experiments are divided in three categories. In the first part, it studied the variation with energy of the cross sections of natural uranium, {sup 233}U, {sup 235}U and {sup 239}Pu. Two measurement techniques are used: the time-of-flight spectrometer and the crystal spectrometer. In a second part, the fission cross sections of {sup 233}U and {sup 239}Pu for thermal neutrons are compared using a neutron flux from EL-2 going through a double fission chamber. The matter quantity contained in each source is measured by counting the {alpha} activity with a solid angle counter. Finally, the average cross section of {sup 236}U for a spectra of neutrons from the reactor is measured by studying the {beta} activity of {sup 237}U formed by the reaction {sup 236}U (n, {gamma}) {sup 237}U in a sample of {sup 236}U irradiated in the Saclay reactor (EL-2). (M.P.)

A method for measuring light ion reaction cross-sections

International Nuclear Information System (INIS)

Carlson, R.F.; Ingemarsson, A.; Lantz, M.; Arendse, G.J.; Auce, A.; Cox, A.J.; Foertsch, S.V.; Jacobs, N.M.; Johansson, R.; Nyberg, J.; Peavy, J.; Renberg, P.-U.; Sundberg, O.; Stander, J.A.; Steyn, G.F.; Tibell, G.; Zorro, R.

2005-01-01

An experimental procedure for measuring reaction cross-sections of light ions in the energy range 20-50 MeV/nucleon, using a modified attenuation technique, is described. The detection method incorporates a forward detector that simultaneously measures the reaction cross-sections for five different sizes of the solid angle in steps from 99.1% to 99.8% of the total solid angle. The final reaction cross-section values are obtained by extrapolation to the full solid angle

A method for measuring light ion reaction cross sections

International Nuclear Information System (INIS)

Carlson, R.F.; Ingemarsson, A.; Lantz, M.

2005-03-01

An experimental procedure for measuring reaction cross sections of light ions in the energy range 20-50 MeV/nucleon, using a modified attenuation technique, is described. The detection method incorporates a forward detector that simultaneously measures the reaction cross sections for five different sizes of the solid angles in steps from 99.1 to 99.8% of the total solid angle. The final reaction cross section values are obtained by extrapolation to the full solid angle

β-ray photography of lyophilized animal sections

International Nuclear Information System (INIS)

Baba, Shigeo; Kimata, Hideki; Matsuzawa, Takashi

1997-01-01

A new photographic method that images the density distribution of lyophilized animal sections approximately 50 μm in thickness is described. The new method involves sandwiching the animal section between a radiation sensor and a 147 Pm planar radiation source. Either conventional photographic film or an imaging plate for radioluminography can be used as the sensor. The method described herein will find promising applications in whole body autoradiography as well as in the study of osteoporosis in experimental animals. (Author)

CT of the pelvis after cesarean section

International Nuclear Information System (INIS)

Twickler, D.; Setiawan, H.; Harrell, R.; Brown, C.E.L.

1989-01-01

Febrile morbidity following cesarean section is often evaluated with CT, although the CT appearance of the normal uterus has not been evaluated. This study was undertaken to learn the normal uterine appearance after cesarean section. To date, 15 women who also underwent bilateral tubal ligation have been studied. Six had a vertical uterine incision; nine had a low transverse incision. Contrast-enhanced pelvic CT was performed 1--5 days after surgery. All women were asymptomatic, with a normal postpartum course

A global reference for caesarean section rates (C-Model): a multicountry cross-sectional study.

Science.gov (United States)

Souza, J P; Betran, A P; Dumont, A; de Mucio, B; Gibbs Pickens, C M; Deneux-Tharaux, C; Ortiz-Panozo, E; Sullivan, E; Ota, E; Togoobaatar, G; Carroli, G; Knight, H; Zhang, J; Cecatti, J G; Vogel, J P; Jayaratne, K; Leal, M C; Gissler, M; Morisaki, N; Lack, N; Oladapo, O T; Tunçalp, Ö; Lumbiganon, P; Mori, R; Quintana, S; Costa Passos, A D; Marcolin, A C; Zongo, A; Blondel, B; Hernández, B; Hogue, C J; Prunet, C; Landman, C; Ochir, C; Cuesta, C; Pileggi-Castro, C; Walker, D; Alves, D; Abalos, E; Moises, Ecd; Vieira, E M; Duarte, G; Perdona, G; Gurol-Urganci, I; Takahiko, K; Moscovici, L; Campodonico, L; Oliveira-Ciabati, L; Laopaiboon, M; Danansuriya, M; Nakamura-Pereira, M; Costa, M L; Torloni, M R; Kramer, M R; Borges, P; Olkhanud, P B; Pérez-Cuevas, R; Agampodi, S B; Mittal, S; Serruya, S; Bataglia, V; Li, Z; Temmerman, M; Gülmezoglu, A M

2016-02-01

To generate a global reference for caesarean section (CS) rates at health facilities. Cross-sectional study. Health facilities from 43 countries. Thirty eight thousand three hundred and twenty-four women giving birth from 22 countries for model building and 10,045,875 women giving birth from 43 countries for model testing. We hypothesised that mathematical models could determine the relationship between clinical-obstetric characteristics and CS. These models generated probabilities of CS that could be compared with the observed CS rates. We devised a three-step approach to generate the global benchmark of CS rates at health facilities: creation of a multi-country reference population, building mathematical models, and testing these models. Area under the ROC curves, diagnostic odds ratio, expected CS rate, observed CS rate. According to the different versions of the model, areas under the ROC curves suggested a good discriminatory capacity of C-Model, with summary estimates ranging from 0.832 to 0.844. The C-Model was able to generate expected CS rates adjusted for the case-mix of the obstetric population. We have also prepared an e-calculator to facilitate use of C-Model (www.who.int/reproductivehealth/publications/maternal_perinatal_health/c-model/en/). This article describes the development of a global reference for CS rates. Based on maternal characteristics, this tool was able to generate an individualised expected CS rate for health facilities or groups of health facilities. With C-Model, obstetric teams, health system managers, health facilities, health insurance companies, and governments can produce a customised reference CS rate for assessing use (and overuse) of CS. The C-Model provides a customized benchmark for caesarean section rates in health facilities and systems. © 2015 World Health Organization; licensed by John Wiley & Sons Ltd on behalf of Royal College of Obstetricians and Gynaecologists.

Measurement of (n,Xn) reaction cross sections at 96 MeV; Measure des sections efficaces (n,Xn) a 96 MeV

Energy Technology Data Exchange (ETDEWEB)

Sagrado Garcia, Melle Inmaculada C. [Ecole Doctorale: SINEM, U.F.R. de Sciences, Universite de Caen/Basse-Normandie, Esplanade Paix14000 Caen (France)

2006-10-15

Nucleon induced reactions in the 20-200 MeV energy range are intensively studied since a long time. The evaporation and the pre-equilibrium processes correspond to an important contribution of the production cross section in these reactions. Several theoretical approaches have been proposed and their predictions must be tested. The experimental results shown in this work are the only complete set of data for the (n,Xn) reactions in this energy range. Neutron double differential cross section measurements using lead and iron targets for an incident neutron beam at 96 MeV were carried out at TSL Laboratory in Uppsala, Sweden. The measurements have been performed for the first time with an energy threshold of 2 MeV and for a wide angular range (15 angle - 98 angle). Neutrons have been detected using two independent setups, DECOI and DEMON and CLODIA and SCANDAL, in order to cover the whole energy range (2-100) MeV. The angular distributions, the differential cross sections and the total inelastic production cross sections have been calculated using the double differential cross sections. The comparison between the experimental data and the predictions given by two of the most popular simulation codes, GEANT3 and MCNPX, have been performed, as well as the comparison with the predictions of the microscopic simulation model DYWAN, selected for its treatment of nucleon-nucleon reactions. (author)

Evaluation of covariance for 238U cross sections

International Nuclear Information System (INIS)

Kawano, Toshihiko; Nakamura, Masahiro; Matsuda, Nobuyuki; Kanda, Yukinori

1995-01-01

Covariances of 238 U are generated using analytic functions for representation of the cross sections. The covariances of the (n,2n) and (n,3n) reactions are derived with a spline function, while the covariances of the total and the inelastic scattering cross section are estimated with a linearized nuclear model calculation. (author)

Electron collision cross section sets of TMS and TEOS vapours

Science.gov (United States)

Kawaguchi, S.; Takahashi, K.; Satoh, K.; Itoh, H.

2017-05-01

Reliable and detailed sets of electron collision cross sections for tetramethylsilane [TMS, Si(CH3)4] and tetraethoxysilane [TEOS, Si(OC2H5)4] vapours are proposed. The cross section sets of TMS and TEOS vapours include 16 and 20 kinds of partial ionization cross sections, respectively. Electron transport coefficients, such as electron drift velocity, ionization coefficient, and longitudinal diffusion coefficient, in those vapours are calculated by Monte Carlo simulations using the proposed cross section sets, and the validity of the sets is confirmed by comparing the calculated values of those transport coefficients with measured data. Furthermore, the calculated values of the ionization coefficient in TEOS/O2 mixtures are compared with measured data to confirm the validity of the proposed cross section set.

Reference Cross Sections for Charged-particle Monitor Reactions

Science.gov (United States)

Hermanne, A.; Ignatyuk, A. V.; Capote, R.; Carlson, B. V.; Engle, J. W.; Kellett, M. A.; Kibédi, T.; Kim, G.; Kondev, F. G.; Hussain, M.; Lebeda, O.; Luca, A.; Nagai, Y.; Naik, H.; Nichols, A. L.; Nortier, F. M.; Suryanarayana, S. V.; Takács, S.; Tárkányi, F. T.; Verpelli, M.

2018-02-01

Evaluated cross sections of beam-monitor reactions are expected to become the de-facto standard for cross-section measurements that are performed over a very broad energy range in accelerators in order to produce particular radionuclides for industrial and medical applications. The requirements for such data need to be addressed in a timely manner, and therefore an IAEA coordinated research project was launched in December 2012 to establish or improve the nuclear data required to characterise charged-particle monitor reactions. An international team was assembled to recommend more accurate cross-section data over a wide range of targets and projectiles, undertaken in conjunction with a limited number of measurements and more extensive evaluations of the decay data of specific radionuclides. Least-square evaluations of monitor-reaction cross sections including uncertainty quantification have been undertaken for charged-particle beams of protons, deuterons, 3He- and 4He-particles. Recommended beam monitor reaction data with their uncertainties are available at the IAEA-NDS medical portal http://www-nds.iaea.org/medical/monitor_reactions.html.

Impact of clinical audits on cesarean section rate.

Science.gov (United States)

Peng, Fu-Shiang; Lin, Hsien-Ming; Lin, Ho-Hsiung; Tu, Fung-Chao; Hsiao, Chin-Fen; Hsiao, Sheng-Mou

2016-08-01

Many countries have noted a substantial increase in the cesarean section rate (CSR). Several methods for lowering the CSR have been described. Understanding the impact of clinical audits on the CSR may aid in lowering CSR. Thus, our aim is to elucidate the effect of clinical audits on the CSR. We retrospectively analyzed 3781 pregnant women who gave birth in a medical center between January 2008 and January 2011. Pregnant women who delivered between January 2008 and July 2009 were enrolled as the pre-audit group (n = 1592). After August 2009, all cesarean section cases that were audited were enrolled in the audit group (n = 2189). The CSR was compared between groups. The overall CSR (34.5% vs. 31.1%, adjusted odds ratio [OR] = 0.83, p = 0.008) and the cesarean section rate due to dystocia (9.6% vs. 6.2%, p strategy for reducing the CSR. Therefore, we recommend strict monitoring of the indications in dystocia for cesarean section to reduce the CSR. Copyright © 2016. Published by Elsevier B.V.

Handbook of LHC Higgs Cross Sections: 3. Higgs Properties Report of the LHC Higgs Cross Section Working Group

CERN Document Server

Heinemeyer, S; Passarino, G; Tanaka, R; Andersen, J R; Artoisenet, P; Bagnaschi, E A; Banfi, A; Becher, T; Bernlochner, F U; Bolognesi, S; Bolzoni, P; Boughezal, R; Buarque, D; Campbell, J; Caola, F; Carena, M; Cascioli, F; Chanon, N; Cheng, T; Choi, S Y; David, A; de Aquino, P; Degrassi, G; Del Re, D; Denner, A; van Deurzen, H; Diglio, S; Di Micco, B; Di Nardo, R; Dittmaier, S; Dührssen, M; Ellis, R K; Ferrera, G; Fidanza, N; Flechl, M; de Florian, D; Forte, S; Frederix, R; Frixione, S; Gangal, S; Gao, Y; Garzelli, M V; Gillberg, D; Govoni, P; Grazzini, M; Greiner, N; Griffiths, J; Gritsan, A V; Grojean, C; Hall, D C; Hays, C; Harlander, R; Hernandez-Pinto, R; Höche, S; Huston, J; Jubb, T; Kadastik, M; Kallweit, S; Kardos, A; Kashif, L; Kauer, N; Kim, H; Klees, R; Krämer, M; Krauss, F; Laureys, A; Laurila, S; Lehti, S; Li, Q; Liebler, S; Liu, X; Logan, E; Luisoni, G; Malberti, M; Maltoni, F; Mawatari, K; Maierhoefer, F; Mantler, H; Martin, S; Mastrolia, P; Mattelaer, O; Mazzitelli, J; Mellado, B; Melnikov, K; Meridiani, P; Miller, D J; Mirabella, E; Moch, S O; Monni, P; Moretti, N; Mück, A; Mühlleitner, M; Musella, P; Nason, P; Neu, C; Neubert, M; Oleari, C; Olsen, J; Ossola, G; Peraro, T; Peters, K; Petriello, F; Piacquadio, G; Potter, C T; Pozzorini, S; Prokofiev, K; Puljak, I; Rauch, M; Rebuzzi, D; Reina, L; Rietkerk, R; Rizzi, A; Rotstein-Habarnau, Y; Salam, G P; Sborlini, G; Schissler, F; Schönherr, M; Schulze, M; Schumacher, M; Siegert, F; Slavich, P; Smillie, J M; Stål, O; von Soden-Fraunhofen, J F; Spira, M; Stewart, I W; Tackmann, F J; Taylor, P T E; Tommasini, D; Thompson, J; Thorne, R S; Torrielli, P; Tramontano, F; Tran, N V; Trócsányi, Z; Ubiali, M; Vazquez Acosta, M; Vickey, T; Vicini, A; Waalewijn, W J; Wackeroth, D; Wagner, C; Walsh, J R; Wang, J; Weiglein, G; Whitbeck, A; Williams, C; Yu, J; Zanderighi, G; Zanetti, M; Zaro, M; Zerwas, P M; Zhang, C; Zirke, T J E; Zuberi, S

2013-01-01

This Report summarizes the results of the activities in 2012 and the first half of 2013 of the LHC Higgs Cross Section Working Group. The main goal of the working group was to present the state of the art of Higgs Physics at the LHC, integrating all new results that have appeared in the last few years. This report follows the first working group report Handbook of LHC Higgs Cross Sections: 1. Inclusive Observables (CERN-2011-002) and the second working group report Handbook of LHC Higgs Cross Sections: 2. Differential Distributions (CERN-2012-002). After the discovery of a Higgs boson at the LHC in mid-2012 this report focuses on refined prediction of Standard Model (SM) Higgs phenomenology around the experimentally observed value of 125-126 GeV, refined predictions for heavy SM-like Higgs bosons as well as predictions in the Minimal Supersymmetric Standard Model and first steps to go beyond these models. The other main focus is on the extraction of the characteristics and properties of the newly discovered p...

Cesarean Section: MedlinePlus Health Topic

Science.gov (United States)

... Foundation) Cesarean Section: The Operation (March of Dimes Birth Defects Foundation) Statistics and Research Changes in Cesarean Delivery Rates by Gestational Age: United States, 1996-2011 (National ...

Absolute cross-section measurements of inner-shell ionization

Science.gov (United States)

Schneider, Hans; Tobehn, Ingo; Ebel, Frank; Hippler, Rainer

1994-12-01

Cross section ratios for K- and L-shell ionization of thin silver and gold targets by positron and electron impact have been determined at projectile energies of 30 70 keV. The experimental results are confirmed by calculations in plane wave Born approximation (PWBA) which include an electron exchange term and account for the deceleration or acceleration of the incident projectile in the nuclear field of the target atom. We report first absolute cross sections for K- and L-shell ionization of silver and gold targets by lepton impact in the threshold region. We have measured the corresponding cross sections for electron (e-) impact with an electron gun and the same experimental set-up.

Homogenized group cross sections by Monte Carlo

International Nuclear Information System (INIS)

Van Der Marck, S. C.; Kuijper, J. C.; Oppe, J.

2006-01-01

Homogenized group cross sections play a large role in making reactor calculations efficient. Because of this significance, many codes exist that can calculate these cross sections based on certain assumptions. However, the application to the High Flux Reactor (HFR) in Petten, the Netherlands, the limitations of such codes imply that the core calculations would become less accurate when using homogenized group cross sections (HGCS). Therefore we developed a method to calculate HGCS based on a Monte Carlo program, for which we chose MCNP. The implementation involves an addition to MCNP, and a set of small executables to perform suitable averaging after the MCNP run(s) have completed. Here we briefly describe the details of the method, and we report on two tests we performed to show the accuracy of the method and its implementation. By now, this method is routinely used in preparation of the cycle to cycle core calculations for HFR. (authors)

Single-section mines carve out a market

International Nuclear Information System (INIS)

Sanda, A.P.

1991-01-01

In the Appalachian states of Pennsylvania, West Virginia, Kentucky and Virginia there are large operations whose complexes are an agglomeration of one and two-section mines; large operators whose own mines are augmented by small contractors; small contractors whose one-section mines collectively make them large operators within this genre; and independent, sole-owner operators of single-contract mines. Finally, there is the totally independent operator who negotiates his own leases, mines his own coal and searches for his own markets. The article profiles 6 single section mines. Mines were chosen on criteria including: the equipment in use; obtaining a representive sample of the states with many small coal mines particularly West Virginia, Virginia and Kentucky; the divergence of operators and situations. The mines chosen were: Elk Run; Kinney Branch Coal Co. No. 5 mine; A ampersand G No. 1 mine; Dotson and Rife Coal Co.; Bullion Hollow Coal Co.; and Bruce Coal. The article includes production rates and mine specifications. 1 tab

Double-differential heavy-ion production cross sections

International Nuclear Information System (INIS)

Miller, T. M.; Townsend, L. W.

2004-01-01

Current computational tools used for space or accelerator shielding studies transport energetic heavy ions either using a one-dimensional straight-ahead approximation or by dissociating the nuclei into protons and neutrons and then performing neutron and proton transport using Monte Carlo techniques. Although the heavy secondary particles generally travel close to the beam direction, a proper treatment of the light ions produced in these reactions requires that double-differential cross sections should be utilised. Unfortunately, no fundamental nuclear model capable of serving as an event generator to provide these cross sections for all ions and energies of interest exists currently. Herein, we present a model for producing double-differential heavy-ion production cross sections that uses heavy-ion fragmentation yields produced by the NUCFRG2 fragmentation code coupled with a model of energy degradation in nucleus-nucleus collisions and systematics of momentum distributions to provide energy and angular dependences of the heavy-ion production. (authors)

Prospects for Precision Neutrino Cross Section Measurements

Energy Technology Data Exchange (ETDEWEB)

Harris, Deborah A. [Fermilab

2016-01-28

The need for precision cross section measurements is more urgent now than ever before, given the central role neutrino oscillation measurements play in the field of particle physics. The definition of precision is something worth considering, however. In order to build the best model for an oscillation experiment, cross section measurements should span a broad range of energies, neutrino interaction channels, and target nuclei. Precision might better be defined not in the final uncertainty associated with any one measurement but rather with the breadth of measurements that are available to constrain models. Current experience shows that models are better constrained by 10 measurements across different processes and energies with 10% uncertainties than by one measurement of one process on one nucleus with a 1% uncertainty. This article describes the current status of and future prospects for the field of precision cross section measurements considering the metric of how many processes, energies, and nuclei have been studied.

Neutron Elastic Scattering Cross Sections Experimental Data and Optical Model Cross Section Calculations. A Compilation of Neutron Data from the Studsvik Neutron Physics Laboratory

Energy Technology Data Exchange (ETDEWEB)

Holmqvist, B; Wiedling, T

1969-06-15

Neutron elastic scattering cross section measurements have been going on for a long period at the Studsvik Van de Graaff laboratory. The cross sections of a range of elements have been investigated in the energy interval 1.5 to 8 MeV. The experimental data have been compared with cross sections calculated with the optical model when using a local nuclear potential.

Electron capture cross sections by O+ from atomic He

International Nuclear Information System (INIS)

Joseph, Dwayne C; Saha, Bidhan C

2009-01-01

The adiabatic representation is used in both the quantal and semi classical molecular orbital close coupling methods (MOCC) to evaluate charge exchange cross sections. Our results show good agreement with experimental cross sections

Electron capture cross sections by O+ from atomic He

Science.gov (United States)

Joseph, Dwayne C.; Saha, Bidhan C.

2009-11-01

The adiabatic representation is used in both the quantal and semi classical molecular orbital close coupling methods (MOCC) to evaluate charge exchange cross sections. Our results show good agreement with experimental cross sections

ACHP | Advisory Council on Historic Preservation Section 213 Reports

Science.gov (United States)

Building, Washington, DC. Click here to read the Section 213 Report on the Highwood Generating Station , DC. For more information on the Section 106 process click here. Updated February 28, 2016 Return to

Portrayal of caesarean section in Brazilian women's magazines: 20 year review.

Science.gov (United States)

Torloni, Maria Regina; Daher, Silvia; Betrán, Ana Pilar; Widmer, Mariana; Montilla, Pilar; Souza, Joao Paulo; Merialdi, Mario

2011-01-25

To assess the quality and comprehensiveness of the information on caesarean section provided in Brazilian women's magazines. Review of articles published during 1988-2008 in top selling women's magazines. Brazil, one of the countries with the highest caesarean section rates in the world. Women's magazines with the largest distribution during the study period, identified through the official national media indexing organisations. Articles with objective scientific information or advice, comments, opinions, or the experience of ordinary women or celebrities on delivery by caesarean section. Sources of information mentioned by the author of the article, the accuracy and completeness of data presented on caesarean section, and alleged reasons why women would prefer to deliver though caesarean section. 118 articles were included. The main cited sources of information were health professionals (78% (n=92) of the articles). 71% (n=84) of the articles reported at least one benefit of caesarean section, and 82% (n=97) reported at least one short term maternal risk of caesarean section. The benefits most often attributed to delivery by caesarean section were reduction of pain and convenience for family or health professionals. The most frequently reported short term maternal risks of caesarean section were increased time to recover and that it is a less natural way of giving birth. Only one third of the articles mentioned any long term maternal risks or perinatal complications associated with caesarean section. Fear of pain was the main reported reason why women would prefer to deliver by caesarean section. Most of the articles published in Brazilian women's magazines do not use optimal sources of information. The portrayal of caesarean section is mostly balanced, not explicitly in favour of one or another route of delivery, but incomplete and may be leading women to underestimate the maternal/perinatal risks associated with this route of delivery.

Precise measurements of neutron capture cross sections for FP

International Nuclear Information System (INIS)

Nakamura, Shoji; Harada, Hideo; Katoh, Toshio

2000-01-01

The thermal neutron capture cross sections (σ 0 ) and the resonance integrals (I 0 ) of some fission products (FP), such as 137 Cs, 90 Sr, 99 Tc, 129 I and 135 Cs, were measured by the activation and γ-ray spectroscopic methods. Moreover, the cross section measurements were done for other FP elements, such as 127 I, 133 Cs and 134 Cs. This paper provides the summary of the FP cross section measurements, which have been performed by authors. (author)

Habit, Production, and the Cross-Section of Stock Returns

OpenAIRE

Chen, Andrew Y.

2014-01-01

Solutions to the equity premium puzzle should inform us about the cross-section of stock returns. An external habit model with heterogeneous firms reproduces numerous stylized facts about both the equity premium and the value premium. The equity premium is large, time-varying, and linked with consumption volatility. The cross-section of expected returns is log-linear in B/M, and the slope matches the data. The explanation for the value premium lies in the interaction between the cross-section...

Drell-Yan cross section in the jet calculus scheme

International Nuclear Information System (INIS)

Tanaka, Hidekazu; Kobayashi, Hirokazu

2009-01-01

We calculate factorized cross sections for lepton pair production mediated by a virtual photon in hadron-hadron collisions using the jet calculus scheme, in which a kinematical constraint due to parton radiation is taken into account. This method guarantees a proper phase space boundary for subtraction terms. Some properties of the calculated cross sections are examined. We also discuss matching between the hard scattering cross sections and parton showers at the next-to-leading logarithmic (NLL) order of quantum chromodynamics (QCD). (author)

Testing of cross section libraries for TRIGA criticality benchmark

International Nuclear Information System (INIS)

Snoj, L.; Trkov, A.; Ravnik, M.

2007-01-01

Influence of various up-to-date cross section libraries on the multiplication factor of TRIGA benchmark as well as the influence of fuel composition on the multiplication factor of the system composed of various types of TRIGA fuel elements was investigated. It was observed that keff calculated by using the ENDF/B VII cross section library is systematically higher than using the ENDF/B-VI cross section library. The main contributions (∼ 2 20 pcm) are from 235 U and Zr. (author)

Systematics of fission cross sections at the intermediate energy region

Energy Technology Data Exchange (ETDEWEB)

Fukahori, Tokio; Chiba, Satoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1997-03-01

The systematics was obtained with fitting experimental data for proton induced fission cross sections of Ag, {sup 181}Ta, {sup 197}Au, {sup 206,207,208}Pb, {sup 209}Bi, {sup 232}Th, {sup 233,235,238}U, {sup 237}Np and {sup 239}Pu above 20 MeV. The low energy cross section of actinoid nuclei is omitted from systematics study, since the cross section has a complicated shape and strongly depends on characteristic of nucleus. The fission cross sections calculated by the systematics are in good agreement with experimental data. (author)

Section of mechanized timbering

Energy Technology Data Exchange (ETDEWEB)

Balaganskiy, S Ye; Aksanov, Sh I; Ardashev, K A; Mednik, L Ye; Mikhaylov, P G

1980-09-05

A section of mechanized timbering is claimed which contains a base, roof timber, hydraulic stand, hydraulic packing cylinders, packing telescopic shield hinged to the roof timber by means of guides. To improve the reliability of forming the filling massif, the packing telescopic shield is made in the form of individual telescopic beams with guards which are interconnected by means of cross beams, while the gaps between the telescopic beams are covered with elasic plates.

An overview of the health economic implications of elective caesarean section.

Science.gov (United States)

Petrou, Stavros; Khan, Kamran

2013-12-01

The caesarean section rate has continued to increase in most industrialised countries, which raises a number of economic concerns. This review provides an overview of the health economic implications of elective caesarean section. It provides a succinct summary of the health consequences associated with elective caesarean section for both the infant and the mother over the perinatal period and beyond. It highlights factors that complicate our understanding of the health consequences of elective caesarean section, including inconsistencies in definitions and coding of the procedure, failure to adopt an intention-to-treat principle when drawing comparisons, and the widespread reliance on observational data. The paper then summarises the economic costs associated with elective caesarean section. Evidence is presented to suggest that planned caesarean section may be less costly than planned vaginal birth in some clinical contexts, for example where the singleton fetus lies in a breech position at term. In contrast, elective caesarean section (or caesarean section as a whole) appears to be more costly than vaginal delivery (either spontaneous or instrumented) in low-risk or unselected populations. The paper proceeds with an overview of economic evaluations associated with elective caesarean section. All are currently based on decision-analytic models. Evidence is presented to suggest that planned trial of labour (attempted vaginal birth) following a previous caesarean section appears to be a more cost-effective option than elective caesarean section, although its cost effectiveness is dependent upon the probability of successful vaginal delivery. There is conflicting evidence on the cost effectiveness of maternal request caesareans when compared with trial of labour. The paucity of evidence on the value pregnant women, clinicians and other groups in society place on the option of elective caesarean section is highlighted. Techniques that might be used to elicit

Elastic scattering and total cross section at very high energies

International Nuclear Information System (INIS)

Castaldi, R.; Sanguinetti, G.

1985-01-01

The aim of this review is to summarize the recent progress in the field of elastic scattering and total cross section in this new energy domain. In Section 2 a survey of the experimental situation is outlined. The most significant data are presented, with emphasis on the interpretation, not the specific details or technicalities. This section is therefore intended to give a self-contained look at the field, especially for the nonspecialist. In Section 3, hadron scattering at high energy is described in an impact parameter picture, which provides a model-independent intuitive geometrical representation. The diffractive character of elastic scattering, seen as the shadow of inelastic absorption, is presented as a consequence of unitarity in the s-channel. Spins are neglected throughout this review, inasmuch as the asymptotic behavior in the very high-energy limit is the main concern here. In Section 4 some relevant theorems are recalled on the limiting behavior of hadron-scattering amplitudes at infinite energy. There is also a brief discussion on how asymptotically rising total cross sections imply scaling properties in the elastic differential cross sections. A quick survey of eikonal models is presented and their predictions are compared with ISR and SPS Collider data

26 CFR 301.7701(b)-5 - Coordination with section 877.

Science.gov (United States)

2010-04-01

... section 877. (a) General rule. An alien individual will be subject to United States income tax in the manner provided by section 877, regardless of whether the individual has a tax avoidance motive, if— (1...) Tax imposed. The tax provided for under paragraph (a) of this section will be imposed for the...

Total and partial recombination cross sections for F6+

International Nuclear Information System (INIS)

Mitnik, D.M.; Pindzola, M.S.; Badnell, N.R.

1999-01-01

Total and partial recombination cross sections for F 6+ are calculated using close-coupling and distorted-wave theory. For total cross sections, close-coupling and distorted-wave results, which include interference between the radiative and dielectronic pathways, are found to be in good agreement with distorted-wave results based on a sum of independent processes. Total cross sections near zero energy are dominated by contributions from low-energy dielectronic recombination resonances. For partial cross sections, the close-coupling and distorted-wave theories predict strong interference for recombination into the final recombined ground state 1s 2 2s 21 S 0 of F 5+ , but only weak interference for recombination into the levels of the 1s 2 2s2p configuration. copyright 1999 The American Physical Society

Introduction to the Volume's Two Thematic Sections

Directory of Open Access Journals (Sweden)

Christopher Chase-Dunn

2015-08-01

Full Text Available The first batch contains an article by Political Scientist Daniel Whitcncck on epistemic communities and global leadership and a special thematic section focussing around the ideas ofW. Warren Wagar regarding the future of the world-system and global politics. The second batch of papers in Volume 2 has been edited by P. Nick Kardulias of the Department of Anthropology and Sociology at Kenyon College. This special thematic section focusses on anthropological and archaeological approaches to the study of world systems.

Can cross sections be accurately known for priori?

International Nuclear Information System (INIS)

Pigni, M.T.; Dietrich, F.S.; Herman, M.; Oblozinsky, P.

2008-01-01

Distinct maxima and minima in the neutron total cross section uncertainties were observed in our large scale covariance calculations using a spherical optical potential. In this contribution we investigate the physical origin of this oscillating structure. Specifically, we analyze the case of neutron reactions on 56 Fe, for which total cross section uncertainties are characterized by the presence of five distinct minima at 0.1, 1.1, 5, 25, and 70 MeV. To investigate their origin, we calculated total cross sections by perturbing the real volume depth V v by its expected uncertainty ±ΔV v . Inspecting the effect of this perturbation on the partial wave cross sections we found that the first minimum (at 0.1 MeV) is exclusively due to the contribution of the s-wave. On the other hand, the same analysis at 1.1 MeV showed that the minimum is the result of the interplay between s-, p-, and d-waves; namely the change in the s-wave happens to be counterbalanced by changes in the p- and d-waves. Similar considerations can be extended for the third minimum, although it can be also explained in terms of the Ramsauer effect as well as the other ones (at 25 and 70 MeV). We discuss the potential importance of these minima for practical applications as well as the implications of this work for the uncertainties in total and absorption cross sections

Radar cross section

CERN Document Server

Knott, Gene; Tuley, Michael

2004-01-01

This is the second edition of the first and foremost book on this subject for self-study, training, and course work. Radar cross section (RCS) is a comparison of two radar signal strengths. One is the strength of the radar beam sweeping over a target, the other is the strength of the reflected echo sensed by the receiver. This book shows how the RCS ?gauge? can be predicted for theoretical objects and how it can be measured for real targets. Predicting RCS is not easy, even for simple objects like spheres or cylinders, but this book explains the two ?exact? forms of theory so well that even a

Optimization of specimen preparation of thin cell section for AFM observation

Energy Technology Data Exchange (ETDEWEB)

Li Xinhui [Nanobiology Laboratory, Bio-X Life Science Research Center, School of Life Science and Biotechnology, Shanghai Jiao Tong University, 800 Dongchuan Road, Minhang District, Shanghai 200240 (China); Ji Tong [Department of Oral and Maxillofacial Surgery, School of Stomatology, Affiliated Ninth People' s Hospital, Medical School, Shanghai Jiao Tong University, Shanghai 200011 (China); Hu Jun [Nanobiology Laboratory, Bio-X Life Science Research Center, School of Life Science and Biotechnology, Shanghai Jiao Tong University, 800 Dongchuan Road, Minhang District, Shanghai 200240 (China); Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Sun Jielin [Nanobiology Laboratory, Bio-X Life Science Research Center, School of Life Science and Biotechnology, Shanghai Jiao Tong University, 800 Dongchuan Road, Minhang District, Shanghai 200240 (China)], E-mail: jlsun@sjtu.edu.cn

2008-08-15

High resolution imaging of intracellular structures of ultrathin cell section samples is critical to the performance of precise manipulation by atomic force microscopy (AFM). Here, we test the effect of multiple factors during section sample preparation on the quality of the AFM image. These factors include the embedding materials, the annealing process of the specimen block, section thickness, and section side. We found that neither the embedding materials nor the temperature and speed of the annealing process has any effect on AFM image resolution. However, the section thickness and section side significantly affect the surface topography and AFM image resolution. By systematically testing the image quality of both sides of cell sections over a wide range of thickness (40-1000 nm), we found that the best resolution was obtained with upper-side sections approximately 50-100 nm thick. With these samples, we could observe precise structure details of the cell, including its membrane, nucleoli, and other organelles. Similar results were obtained for other cell types, including Tca8113, C6, and ECV-304. In brief, by optimizing the condition of ultrathin cell section preparation, we were able to obtain high resolution intracellular AFM images, which provide an essential basis for further AFM manipulation.

Measurements of Electron Proton Elastic Cross Sections for 0.4

International Nuclear Information System (INIS)

Christy, M.E.; Abdellah Ahmidouch; Christopher Armstrong; John Arrington; Arshak Asaturyan; Steven Avery; Baker, O.; Douglas Beck; Henk Blok; Bochna, C.W.; Werner Boeglin; Peter Bosted; Maurice Bouwhuis; Herbert Breuer; Brown, D.S.; Antje Bruell; Roger Carlini; Nicholas Chant; Anthony Cochran; Leon Cole; Samuel Danagoulian; Donal Day; James Dunne; Dipangkar Dutta; Rolf Ent; Howard Fenker; Fox, B.; Liping Gan; Haiyan Gao; Kenneth Garrow; David Gaskell; Ashot Gasparian; Don Geesaman; Paul Gueye; Mark Harvey; Roy Holt; Xiaodong Jiang; Cynthia Keppel; Edward Kinney; Yongguang Liang; Wolfgang Lorenzon; Allison Lung; Pete Markowitz; Martin, J.W.; Kevin Mcilhany; David Mckee; David Meekins; Miller, M.A.; Richard Milner; Joseph Mitchell; Hamlet Mkrtchyan; Robert Mueller; Alan Nathan; Gabriel Niculescu; Maria-ioana Niculescu; Thomas O'neill; Vassilios Papavassiliou; Stephen Pate; Rodney Piercey; David Potterveld; Ronald Ransome; Joerg Reinhold; Rollinde, E.; Philip Roos; Adam Sarty; Reyad Sawafta; Elaine Schulte; Edwin Segbefia; Smith, C.; Samuel Stepanyan; Steffen Strauch; Vardan Tadevosyan; Liguang Tang; Raphael Tieulent; Alicia Uzzle; William Vulcan; Stephen Wood; Feng Xiong; Lulin Yuan; Markus Zeier; Benedikt Zihlmann; Vitaliy Ziskin

2004-01-01

We report on precision measurements of the elastic cross section for electron-proton scattering performed in Hall C at Jefferson Lab. The measurements were made at 28 distinct kinematic settings covering a range in momentum transfer of 0.4 < Q2 < 5.5 (GeV/c)2. These measurements represent a significant contribution to the world's cross section data set in the Q2 range, where a large discrepancy currently exists between the ratio of electric to magnetic proton form factors extracted from previous cross section measurements and that recently measured via polarization transfer in Hall A at Jefferson Lab. This data set shows good agreement with previous cross section measurements, indicating that if a heretofore unknown systematic error does exist in the cross section measurements, then it is intrinsic to all such measurements

Calculated Cross Sections for the Electron Impact Ionization of Molecular Ions

Science.gov (United States)

Deutsch, H.; Becker, K.; Defrance, P.; Onthong, U.; Parajuli, R.; Probst, M.; Matt-Leubner, S.; Maerk, T.

2002-10-01

We report the results of the application of the semi- classical Deutsch-Märk (DM) formalism to the calculation of the absolute electron-impact ionization cross section of the molecular ions H2+, N2+, O2+, CD+, CO+, CO2+, H3O+, and CH4+ for which experimental data have been reported . Where available, we also compare our calculated cross sections with calculated cross sections using the BEB method of Kim and co-workers. The level of agreement between the experimentally determined and calculated cross section is satisfactory in some cases. In all cases, the calculated cross sections exceed the measured cross sections which is not surprising in view of the experimental complications in measuring ionization cross sections of molecular ions due to the presence of competing channels such as ionization dissociative ionization, and dissociative excitation. Work supported in part by FWF, OEAW, and NASA.

Content Model Use and Development to Redeem Thin Section Records

Science.gov (United States)

Hills, D. J.

2014-12-01

The National Geothermal Data System (NGDS) is a catalog of documents and datasets that provide information about geothermal resources located primarily within the United States. The goal of NGDS is to make large quantities of geothermal-relevant geoscience data available to the public by creating a national, sustainable, distributed, and interoperable network of data providers. The Geological Survey of Alabama (GSA) has been a data provider in the initial phase of NGDS. One method by which NGDS facilitates interoperability is through the use of content models. Content models provide a schema (structure) for submitted data. Schemas dictate where and how data should be entered. Content models use templates that simplify data formatting to expedite use by data providers. These methodologies implemented by NGDS can extend beyond geothermal data to all geoscience data. The GSA, using the NGDS physical samples content model, has tested and refined a content model for thin sections and thin section photos. Countless thin sections have been taken from oil and gas well cores housed at the GSA, and many of those thin sections have related photomicrographs. Record keeping for these thin sections has been scattered at best, and it is critical to capture their metadata while the content creators are still available. A next step will be to register the GSA's thin sections with SESAR (System for Earth Sample Registration) and assign an IGSN (International Geo Sample Number) to each thin section. Additionally, the thin section records will be linked to the GSA's online record database. When complete, the GSA's thin sections will be more readily discoverable and have greater interoperability. Moving forward, the GSA is implementing use of NGDS-like content models and registration with SESAR and IGSN to improve collection maintenance and management of additional physical samples.

28 CFR 55.5 - Coverage under section 4(f)(4).

Science.gov (United States)

2010-07-01

... THE VOTING RIGHTS ACT REGARDING LANGUAGE MINORITY GROUPS Nature of Coverage § 55.5 Coverage under section 4(f)(4). (a) Coverage formula. Section 4(f)(4) applies to any State or political subdivision in...) Coverage may be determined with regard to section 4(f)(4) on a statewide or political subdivision basis. (1...

Cross-section sensitivity analyses for a Tokamak Experimental Power Reactor

International Nuclear Information System (INIS)

Simmons, E.L.; Gerstl, S.A.W.; Dudziak, D.J.

1977-09-01

The objectives of this report were (1) to determine the sensitivity of neutronic responses in the preliminary design of the Tokamak Experimental Power Reactor by Argonne National Laboratory, and (2) to develop the use of a neutron-gamma coupled cross-section set in the calculation of cross-section sensitivity analysis. Response functions such as neutron plus gamma kerma, Mylar dose, copper transmutation, copper dpa, and activation of the toroidal field coil dewar were investigated. Calculations revealed that the responses were most sensitive to the high-energy group cross sections of iron in the innermost regions containing stainless steel. For example, both the neutron heating of the toroidal field coil and the activation of the toroidal field coil dewar show an integral sensitivity of about -5 with respect to the iron total cross sections. Major contributors are the scattering cross sections of iron, with -2.7 and -4.4 for neutron heating and activation, respectively. The effects of changes in gamma cross sections were generally an order of 10 lower

DMCA Section 104 Report: A Report of the Register of Copyrights Pursuant to [Section] 104 of the Digital Millennium Copyright Act.

Science.gov (United States)

Library of Congress, Washington, DC. Copyright Office.

As required under section 104 of Public Law No. 105-304, this Report evaluates the effects of title I of the Digital Millennium Copyright Act (DMCA) of 1998 and the development of electronic commerce and associated technology on the operation of sections 109 and 117 of title 17, U.S.C. It also evaluates the relationship between existing and…

Neutrino-carbon cross section in QRPA models

International Nuclear Information System (INIS)

Samana, Arturo R.; Krmpotic, Francisco; Bertulani, Carlos A.; Paar, Nils

2009-01-01

Full text follows. The ν/ν-bar - 12 C cross sections are calculated in the projected quasiparticle random phase approximation (PQRPA) [1,2] and the relativistic quasiparticle random phase approximation (RQRPA) [3,4]. We compare these cross section as a function of the incident neutrino energy and the number of shells used in the nuclear structure calculation. Additional comparison with other RPA models are performed. A guide to find an upper limit of the incident neutrino energy as a function of the number of shell is implemented. Important consequences on the extrapolation of the cross section to higher neutrino energies is discussed. The formalism obtained in Ref. [1] for the neutrino interaction is extended for antineutrino scattering. This formalism includes the effect of the violation of the Conserved Vector Current by the Coulomb field. It is furthermore simplified by classifying the nuclear matrix elements in natural and unnatural parities. The distribution of cross sections averaged with the Michel spectrum as well as with other estimated fluxes for future experiments are compared for ν e and ν-bar e . Some astrophysical implications are addressed. References [1] F. Krmpotic, A. Mariano and A. Samana, Phys.Lett. B541, 298 (2002). [2] F. Krmpotic, A. Mariano and A. Samana, Phys. Rev. C 71, 044319 (2005). [3] N. Paar, T. Niksic, D. Vretenar, and P. Ring, Phys. Rev. C 69, 054303 (2004). [4] N. Paar, D. Vretenar, T. Marketin and P. Ring, Phys. Rev. C 77, 024608 (2008)

PLANNING VESSEL BODY SECTION PRODUCTION

Directory of Open Access Journals (Sweden)

A. G. Grivachevsky

2015-01-01

Full Text Available A problem of planning production of a vessel body section is considered. The problem is reduced to the classic Johnson’s tree-machine flow-shop scheduling problem. A genetic algorithm and computer experiment to compare efficiency of this algorithm and the algorithm of full enumeration are described.

Caesarean section and anaesthetic mortality

African Journals Online (AJOL)

Southern African Journal of Anaesthesia and Analgesia is co-published by Medpharm Publications, NISC (Pty) Ltd and Cogent, Taylor & Francis Group. LETTER TO THE EDITOR. Caesarean section and ... births there are 3.1 maternal deaths,2 13 neonatal deaths, 28 infantile deaths and 40 deaths under the age of 5 ...

Referred pain location depends on the affected section of the sacroiliac joint.

Science.gov (United States)

Kurosawa, Daisuke; Murakami, Eiichi; Aizawa, Toshimi

2015-03-01

Pain referred from the sacroiliac joint (SIJ) may originate in the joint's posterior ligamentous region. The site of referred pain may depend on which SIJ section is affected. This study aimed to determine the exact origin of pain referred from four SIJ sections. The study included 50 patients with SIJ dysfunction, confirmed by more than 70 % pain relief after periarticular injection of local anesthetic into the SIJ. The posterior SIJ was divided into four sections-upper, middle, lower, and other (cranial portion of the ilium outside the SIJ)-designated sections 1, 2, 3, and 0, respectively. We then inserted a needle into the periarticular SIJ under fluoroscopy. After the patient identified the area(s) in which the needle insertion produced referred pain, we injected a mixture of 2 % lidocaine and contrast medium into the corresponding SIJ section. Referred pain from SIJ section 0 was mainly located in the upper buttock along the iliac crest; pain from section 1, around the posterosuperior iliac spine; pain from section 2, in the middle buttock area; pain from section 3, in the lower buttock. In all, 22 (44.0 %) patients complained of groin pain, which was slightly relieved by lidocaine injection into SIJ sections 1 and 0. Dysfunctional upper sections of the SIJ are associated with pain in the upper buttock and lower sections with pain in the lower buttock. Groin pain might be referred from the upper SIJ sections.

29 CFR 779.504 - The retailer and section 12(c).

Science.gov (United States)

2010-07-01

... Child Labor Provisions § 779.504 The retailer and section 12(c). Section 12(c) was amended in 1961 to prohibit the employment of oppressive child labor in any enterprise engaged in commerce or in the... comply with section 12(c) of the child labor provisions of the Act. As stated in § 779.503, compliance...

Automated Cross-Sectional Measurement Method of Intracranial Dural Venous Sinuses.

Science.gov (United States)

Lublinsky, S; Friedman, A; Kesler, A; Zur, D; Anconina, R; Shelef, I

2016-03-01

MRV is an important blood vessel imaging and diagnostic tool for the evaluation of stenosis, occlusions, or aneurysms. However, an accurate image-processing tool for vessel comparison is unavailable. The purpose of this study was to develop and test an automated technique for vessel cross-sectional analysis. An algorithm for vessel cross-sectional analysis was developed that included 7 main steps: 1) image registration, 2) masking, 3) segmentation, 4) skeletonization, 5) cross-sectional planes, 6) clustering, and 7) cross-sectional analysis. Phantom models were used to validate the technique. The method was also tested on a control subject and a patient with idiopathic intracranial hypertension (4 large sinuses tested: right and left transverse sinuses, superior sagittal sinus, and straight sinus). The cross-sectional area and shape measurements were evaluated before and after lumbar puncture in patients with idiopathic intracranial hypertension. The vessel-analysis algorithm had a high degree of stability with <3% of cross-sections manually corrected. All investigated principal cranial blood sinuses had a significant cross-sectional area increase after lumbar puncture (P ≤ .05). The average triangularity of the transverse sinuses was increased, and the mean circularity of the sinuses was decreased by 6% ± 12% after lumbar puncture. Comparison of phantom and real data showed that all computed errors were <1 voxel unit, which confirmed that the method provided a very accurate solution. In this article, we present a novel automated imaging method for cross-sectional vessels analysis. The method can provide an efficient quantitative detection of abnormalities in the dural sinuses. © 2016 by American Journal of Neuroradiology.

The golden section and American psychology, 1892-1938.

Science.gov (United States)

Benjafield, John G

2010-01-01

The golden section has been said by many to be the most beautiful proportion. Fechner was the first to investigate it experimentally, and several late-nineteenth- and early-twentieth-century American psychologists followed up on his work. Among these were four prominent names: Lightner Witmer (1867-1956), Edward L. Thorndike (1874-1949), Robert S. Woodworth (1869-1962), and Robert M. Ogden (1877-1959). Why did such well-known psychologists bother with the golden section? In attempting to answer this question we discovered that the golden section was surprisingly well known during this period, not only in psychology but also in advertising and design. It would have been entirely congruent with their stature for prominent psychologists to take an interest in it.

Measurements of neutron cross sections of radioactive waste nuclides

Energy Technology Data Exchange (ETDEWEB)

Katoh, Toshio [Gifu College of Medical Technology, Seki, Gifu (Japan); Harada, Hideo; Nakamura, Shoji; Tanase, Masakazu; Hatsukawa, Yuichi

1998-01-01

Accurate nuclear reaction cross sections of radioactive fission products and transuranic elements are required for research on nuclear transmutation methods in nuclear waste management. Important fission products in the nuclear waste management are {sup 137}Cs, {sup 135}Cs, {sup 90}Sr, {sup 99}Tc and {sup 129}I because of their large fission yields and long half-lives. The present authors have measured the neutron capture cross sections and resonance integrals of {sup 137}Cs, {sup 90}Sr and {sup 99}Tc. The purpose of this study is to measure the neutron capture cross sections and resonance integrals of nuclides, {sup 129}I and {sup 135}Cs accurately. Preliminary experiments were performed by using Rikkyo University Reactor and JRR-3 reactor at Japan Atomic Energy Research Institute (JAERI). Then, it was decided to measure the cross section and resonance integral of {sup 135}Cs by using the JRR-3 Reactor because this measurement required a high flux reactor. On the other hand, those of {sup 129}I were measured at the Rikkyo Reactor because the product nuclides, {sup 130}I and {sup 130m}I, have short half-lives and this reactor is suitable for the study of short lived nuclide. In this report, the measurements of the cross section and resonance integral of {sup 135}Cs are described. To obtain reliable values of the cross section and resonance integral of {sup 135}Cs(n, {gamma}){sup 136}Cs reaction, a quadrupole mass spectrometer was used for the mass analysis of nuclide in the sample. A progress report on the cross section of {sup 134}Cs, a neighbour of {sup 135}Cs, is included in this report. A report on {sup 129}I will be presented in the Report on the Joint-Use of Rikkyo University Reactor. (author)

Development of automatic cross section compilation system for MCNP

International Nuclear Information System (INIS)

Maekawa, Fujio; Sakurai, Kiyoshi

1999-01-01

A development of a code system to automatically convert cross-sections for MCNP is in progress. The NJOY code is, in general, used to convert the data compiled in the ENDF format (Evaluated Nuclear Data Files by BNL) into the cross-section libraries required by various reactor physics codes. While the cross-section library: FSXLIB-J3R2 was already converted from the JENDL-3.2 version of Japanese Evaluated Nuclear Data Library for a continuous energy Monte Carlo code MCNP, the library keeps only the cross-sections at room temperature (300 K). According to the users requirements which want to have cross-sections at higher temperature, say 600 K or 900 K, a code system named 'autonj' is under development to provide a set of cross-section library of arbitrary temperature for the MCNP code. This system can accept any of data formats adopted JENDL that may not be treated by NJOY code. The input preparation that is repeatedly required at every nuclide on NJOY execution is greatly reduced by permitting the conversion process of as many nuclides as the user wants in one execution. A few MCNP runs were achieved for verification purpose by using two libraries FSXLIB-J3R2 and the output of autonj'. The almost identical MCNP results within the statistical errors show the 'autonj' output library is correct. In FY 1998, the system will be completed, and in FY 1999, the user's manual will be published. (K. Tsuchihashi)

Changing trends of indications and rate of cesarean section

International Nuclear Information System (INIS)

Ambreen, A.; Intsar, A.; Khurshid, S.

2013-01-01

Background: There is a trend of rising caesarean section rate over the past decade affecting the economy of the country. This continually rising caesarean section rate is of increasing concern to the health professionals and the public This study was designed to assess the indications and trends of caesarean sections done over a five year period from 2007 to 2011. Methods: This was a retrospective observational study done over a five year period in the department of Obstetrics and Gynaecology Fatima Memorial Hospital Lahore from 2007 to 2011. Results: Total no of deliveries from 2007 to 2011 were 30741 out of which caesarean sections performed were 13820.The caesarean birth rate increased from 41% to-48%. The indications varied a little in case of mal-presentation and eclampsia. APH and IUGR has risen a little from (from 2.56% to 2.6% and 1.83% to 2.34% respectively). But proportion of repeat caesarean section increased by 25.99% to 31.45% and that of presumed fetal distress increased from 8% to 15% respectively. Recently the indication of maternal choice is emerging with incidence of 0.8% in our study. The proportion has fallen in prolonged labour due to cervical dystocia from 17% to 14% and in obstructed labour from 4.6% to 3%. Conclusion: Individualization of every case, meticulous clinical examination, use of intrapartum fetomaternal survellience along with regular use of partograrm would limit the practice of undue caesarean sections. (author)

Frozen section pathology for decision making in parotid surgery.

Science.gov (United States)

Olsen, Kerry D; Moore, Eric J; Lewis, Jean E

2013-12-01

For parotid lesions, the high accuracy and utility of intraoperative frozen section (FS) pathology, compared with permanent section pathology, facilitates intraoperative decision making about the extent of surgery required. To demonstrate the accuracy and utility of FS pathology of parotid lesions as one factor in intraoperative decision making. Retrospective review of patients undergoing parotidectomy at a tertiary care center. Evaluation of the accuracy of FS pathology for parotid surgery by comparing FS pathology results with those of permanent section. Documented changes from FS to permanent section in 1339 parotidectomy pathology reports conducted from January 1, 2000, through December 31, 2009, included 693 benign and 268 primary and metastatic malignant tumors. Changes in diagnosis were found from benign to malignant (n = 11) and malignant to benign (n = 2). Sensitivity and specificity of a malignant diagnosis were 98.5% and 99.0%, respectively. Other changes were for lymphoma vs inflammation or lymphoma typing (n = 89) and for confirmation of or change in tumor type for benign (n = 36) or malignant (n = 69) tumors. No case changed from low- to high-grade malignant tumor. Only 4 cases that changed from FS to permanent section would have affected intraoperative decision making. Three patients underwent additional surgery 2 to 3 weeks later. Overall, only 1 patient was overtreated (lymphoma initially deemed carcinoma). Frozen section pathology for parotid lesions has high accuracy and utility in intraoperative decision making, facilitating timely complete procedures.

Fission neutron spectrum averaged cross sections for threshold reactions on arsenic

International Nuclear Information System (INIS)

Dorval, E.L.; Arribere, M.A.; Kestelman, A.J.; Comision Nacional de Energia Atomica, Cuyo Nacional Univ., Bariloche; Ribeiro Guevara, S.; Cohen, I.M.; Ohaco, R.A.; Segovia, M.S.; Yunes, A.N.; Arrondo, M.; Comision Nacional de Energia Atomica, Buenos Aires

2006-01-01

We have measured the cross sections, averaged over a 235 U fission neutron spectrum, for the two high threshold reactions: 75 As(n,p) 75 mGe and 75 As(n,2n) 74 As. The measured averaged cross sections are 0.292±0.022 mb, referred to the 3.95±0.20 mb standard for the 27 Al(n,p) 27 Mg averaged cross section, and 0.371±0.032 mb referred to the 111±3 mb standard for the 58 Ni(n,p) 58m+g Co averaged cross section, respectively. The measured averaged cross sections were also evaluated semi-empirically by numerically integrating experimental differential cross section data extracted for both reactions from the current literature. The calculations were performed for four different representations of the thermal-neutron-induced 235 U fission neutron spectrum. The calculated cross sections, though depending on analytical representation of the flux, agree with the measured values within the estimated uncertainties. (author)

Review of multigroup nuclear cross-section processing

Energy Technology Data Exchange (ETDEWEB)

Trubey, D.K.; Hendrickson, H.R. (comps.)

1978-10-01

These proceedings consist of 18 papers given at a seminar--workshop on ''Multigroup Nuclear Cross-Section Processing'' held at Oak Ridge, Tennessee, March 14--16, 1978. The papers describe various computer code systems and computing algorithms for producing multigroup neutron and gamma-ray cross sections from evaluated data, and experience with several reference data libraries. Separate abstracts were prepared for 13 of the papers. The remaining five have already been cited in ERA, and may be located by referring to the entry CONF-780334-- in the Report Number Index. (RWR)

Cross sections for charm production by neutrinos

Energy Technology Data Exchange (ETDEWEB)

Ushida, N [Aichi Univ. of Education, Kariya (Japan). Dept. of Physics; Kondo, T [Fermi National Accelerator Lab., Batavia, IL (USA); Fujioka, G; Fukushima, J; Takahashi, Y; Tatsumi, S; Yokoyama, C [Kobe Univ. (Japan). Dept. of Physics; Homma, Y; Tsuzuki, Y [Kobe Univ. (Japan). Coll. of Liberal Arts; Bahk, S

1983-02-03

The production of charmed particles has been measured using a hybrid emulsion spectrometer in the Fermilab wide-band neutrino beam. The relative cross section for charged current charmed particle production is sigma(v -> ..mu../sup -/c)/sigma(v -> ..mu../sup -/) = 6.5 +- 1.9/1.8%, and the energy dependence of the cross section is presented. One event with charm pair production was observed. A limit of sigma(v -> ..mu..canti c)/sigma(v -> ..mu..c) < 6% (90% CL) is found for the ratio of charged current pair and single charm production.

EDDIX--a database of ionisation double differential cross sections.

Science.gov (United States)

MacGibbon, J H; Emerson, S; Liamsuwan, T; Nikjoo, H

2011-02-01

The use of Monte Carlo track structure is a choice method in biophysical modelling and calculations. To precisely model 3D and 4D tracks, the cross section for the ionisation by an incoming ion, double differential in the outgoing electron energy and angle, is required. However, the double differential cross section cannot be theoretically modelled over the full range of parameters. To address this issue, a database of all available experimental data has been constructed. Currently, the database of Experimental Double Differential Ionisation Cross sections (EDDIX) contains over 1200 digitalised experimentally measured datasets from the 1960s to present date, covering all available ion species (hydrogen to uranium) and all available target species. Double differential cross sections are also presented with the aid of an eight parameter functions fitted to the cross sections. The parameters include projectile species and charge, target nuclear charge and atomic mass, projectile atomic mass and energy, electron energy and deflection angle. It is planned to freely distribute EDDIX and make it available to the radiation research community for use in the analytical and numerical modelling of track structure.

Resonance parameters for measured keV neutron capture cross sections

Energy Technology Data Exchange (ETDEWEB)

Musgrove, A.R. de L

1969-05-01

All available neutron capture cross sections in the keV region ({approx} to 100 keV) have been fitted with resonance parameters. Capture cross sections for nuclides with reasonably well known average s-wave parameters, but no measured cross section, have been calculated and tabulated using p-and d- wave strength functions interpolated between fitted values. Several of these nuclides are of interest in the theory of slow nucleosynthesis of heavy elements in stars, and the product of cosmic abundance (due to the s-process) and capture cross section at 30 keV has been plotted versus mass number. (author)

RESEND, Infinitely Dilute Point Cross-Sections Calculation from ENDF/B Resonance Parameter. ADLER, ENDF/B Adler-Adler Resonance Parameter to Point Cross-Sections with Doppler Broadening

International Nuclear Information System (INIS)

Bhat, M.R.; Ozer, O.

1982-01-01

1 - Description of problem or function: RESEND generates infinitely- dilute, un-broadened, point cross sections in the ENDF format by combining ENDF File 3 background cross sections with points calculated from ENDF File 2 resonance parameter data. ADLER calculates total, capture, and fission cross sections from the corresponding Adler-Adler parameters in the ENDF/B File 2 Version II data and also Doppler-broadens cross sections. 2 - Method of solution: RESEND calculations are done in two steps by two separate sections of the program. The first section does the resonance calculation and stores the results on a scratch file. The second section combines the data from the scratch file with background cross sections and prints the results. ADLER uses the Adler-Adler formalism. 3 - Restrictions on the complexity of the problem: RESEND expects its input to be a standard mode BCD ENDF file (Version II/III). Since the output is also a standard mode BCD ENDF file, the program is limited by the six significant figure accuracy inherent in the ENDF formats. (If the cross section has been calculated at two points so close in energy that only their least significant figures differ, that interval is assumed to have converged, even if other convergence criteria may not be satisfied.) In the unresolved range the cross sections have been averaged over a Porter-Thomas distribution. In some regions the calculated resonance cross sections may be negative. In such cases the standard convergence criterion would cause an unnecessarily large number of points to be produced in the region where the cross section becomes zero. For this reason an additional input convergence criterion (AVERR) may be used. If the absolute value of the cross section at both ends of an interval is determined to be less than AVERR then the interval is assumed to have converged. There are no limitations on the total number of points generated. The present ENDF (Version II/III) formats restrict the total number of

Section 608 Technician Certification Test Topics

Science.gov (United States)

Identifies some of the topics covered on Section 608 Technician Certification tests such as ozone depletion, the Clean Air Act and Montreal Protocol, Substitute Refrigerants and oils, Refrigeration and Recovery Techniques.

Highlights of top quark cross-section measurements at ATLAS

Directory of Open Access Journals (Sweden)

Berta Peter

2017-01-01

Full Text Available The highlights of the measurements of top quark production in proton-proton collisions at the Large Hadron Collider with the ATLAS detector are presented. The inclusive measurements of the top-pair production cross section have reached high precision and are compared to the best available theoretical calculations. The differential cross section measurements, including results using boosted top quarks, probe our understanding of top-pair production in the TeV regime. The results are compared to Monte Carlo generators implementing LO and NLO matrix elements matched with parton showers. Measurements of the single top quark production cross section are presented in the t-channel and s-channel, and with associated production with a W boson. For the t-channel production, results on the ratio between top quark and antitop quark production cross sections and differential measurements are also included.

Rapid in vivo vertical tissue sectioning by multiphoton tomography

Science.gov (United States)

Batista, Ana; Breunig, Hans Georg; König, Karsten

2018-02-01

A conventional tool in the pathological field is histology which involves the analysis of thin sections of tissue in which specific cellular structures are stained with different dyes. The process to obtain these stained tissue sections is time consuming and invasive as it requires tissue removal, fixation, sectioning, and staining. Moreover, imaging of live tissue is not possible. We demonstrate that multiphoton tomography can provide within seconds, non-invasive, label-free, vertical images of live tissue which are in quality similar to conventional light micrographs of histologic stained specimen. In contrast to conventional setups based on laser scanning which image horizontally sections, the vertical in vivo images are directly recorded by combined line scanning and timed adjustments of the height of the focusing optics. In addition, multiphoton tomography provides autofluorescence lifetimes which can be used to determine the metabolic states of cells.

Handbook of LHC Higgs Cross Sections: 2. Differential Distributions

CERN Document Server

Dittmaier, S; Passarino, G; Tanaka, R; Alekhin, S; Alwall, J; Bagnaschi, E A; Banfi, A; Blumlein, J; Bolognesi, S; Chanon, N; Cheng, T; Cieri, L; Cooper-Sarkar, A M; Cutajar, M; Dawson, S; Davies, G; De Filippis, N; Degrassi, G; Denner, A; D'Enterria, D; Diglio, S; Di Micco, B; Di Nardo, R; Ellis, R K; Farilla, A; Farrington, S; Felcini, M; Ferrera, G; Flechl, M; de Florian, D; Forte, S; Ganjour, S; Garzelli, M V; Gascon-Shotkin, S; Glazov, S; Goria, S; Grazzini, M; Guillet, J -Ph; Hackstein, C; Hamilton, K; Harlander, R; Hauru, M; Heinemeyer, S; Hoche, S; Huston, J; Jackson, C; Jimenez-Delgado, P; Jorgensen, M D; Kado, M; Kallweit, S; Kardos, A; Kauer, N; Kim, H; Kovac, M; Kramer, M; Krauss, F; Kuo, C -M; Lehti, S; Li, Q; Lorenzo, N; Maltoni, F; Mellado, B; Moch, S O; Muck, A; Muhlleitner, M; Nadolsky, P; Nason, P; Neu, C; Nikitenko, A; Oleari, C; Olsen, J; Palmer, S; Paganis, S; Papadopoulos, C G; Petersen, T C; Petriello, F; Petrucci, F; Piacquadio, G; Pilon, E; Potter, C T; Price, J; Puljak, I; Quayle, W; Radescu, V; Rebuzzi, D; Reina, L; Rojo, J; Rosco, D; Salam, G P; Sapronov, A; Schaarschmidt, J; Schonherr, M; Schumacher, M; Siegert, F; Slavich, P; Spira, M; Stewart, I W; Stirling, W J; Stockli, F; Sturm, C; Tackmann, F J; Thorne, R S; Tommasini, D; Torrielli, P; Tramontano, F; Trocsanyi, Z; Ubiali, M; Uccirati, S; Acosta, M Vazquez; Vickey, T; Vicini, A; Waalewijn, W J; Wackeroth, D; Warsinsky, M; Weber, M; Wiesemann, M; Weiglein, G; Yu, J; Zanderighi, G

2012-01-01

This Report summarises the results of the second year's activities of the LHC Higgs Cross Section Working Group. The main goal of the working group was to present the state of the art of Higgs Physics at the LHC, integrating all new results that have appeared in the last few years. The first working group report Handbook of LHC Higgs Cross Sections: 1. Inclusive Observables (CERN-2011-002) focuses on predictions (central values and errors) for total Higgs production cross sections and Higgs branching ratios in the Standard Model and its minimal supersymmetric extension, covering also related issues such as Monte Carlo generators, parton distribution functions, and pseudo-observables. This second Report represents the next natural step towards realistic predictions upon providing results on cross sections with benchmark cuts, differential distributions, details of specific decay channels, and further recent developments.

High-energy behaviour of e--H scattering cross section

International Nuclear Information System (INIS)

Saha, B.C.; Chaudhuri, J.; Ghosh, A.S.

1976-01-01

An integral form of the close coupling equation has been employed to investigate the high energy behaviour of the elastic and 2s excitation cross sections of hydrogen atom by electron impact retaining the 1s and 2s states. The results, with and without exchange, for both the total and the differential cross sections are presented. The effects of exchange as well as of couplings to the 1s-2s states on the elastic cross section have been studied. The FBA results for the elastic cross section differ from the present results appreciably in the energy range 100 to 200 eV where FBA is considered to be valid. On the other hand, the present 1s-2s excitation results are very close to the corresponding FBA results in the said energy region. (auth.)

Implementation of the rapid cross section adjustment approach at General Electric

International Nuclear Information System (INIS)

Cowan, C.L.; Kujawski, E.; Protsik, R.

1978-01-01

The General Electric rapid cross section adjustment approach was developed to use the shielding factor method for formulating multigroup cross sections. In this approach, space- and composition-dependent cross sections for a particular reactor or shield design are prepared from a generalized cross section library by the use of resonance self-shielding factors, and by the adjustment of elastic scattering cross sections for the local neutron flux spectra. The principal tool in the cross section adjustment package is the data processing code TDOWN. This code was specified to give the user a high degree of flexibility in the analysis of advanced reactor designs. Of particular interest in the analysis of critical experiments is the ability to carry out cell heterogeneity self-shielding calculations using a multiregion equivalence relationship, and the homogenization of the cross sections over the specified cell with the flux weighting obtained from transport theory calculations. Extensive testing of the rapid cross section adjustment approach, including comparisons with Monte Carlo methods, indicated that this approach can be utilized with a high degree of confidence in the design analysis of complex fast reactor systems. 2 figures, 1 table

Chicago section activities to enhance public acceptance of nuclear power

International Nuclear Information System (INIS)

Snyder, T.L.; Keffer, J.W.

1992-01-01

The Chicago section of the American Nuclear Society (ANS) is an active organization with ∼450 members. The local section territory encompasses northern Illinois and includes in its territory all six of Commonwealth Edison Company's (CECo's) nuclear generating stations as well as Argonne National Laboratory (ANL). Included in the territory are several large engineering firms - ABB Impell, Bechtel, Fluor Daniel, and Sargent ampersand Lundy. The national headquarters of the ANS is also located within the local section boundaries. All these organizations are represented in the local section membership and provide access to abundant technical resources that can be used to enhance public acceptance of nuclear power. An important attribute of any local section that enables it to perform interesting programs and be active in the community is its financial resources. The Chicago section has a strong financial base because of its ability to raise funds by participating in and sponsoring ANS topical and other meetings. For instance, in 1991, they sponsored and were actively involved in the Emergency Preparedness Topical Meeting held in Chicago. In 1992, they were actively involved in sponsoring the organizational activities of the ANS/ENS International Meeting, which will celebrate the 50th year of nuclear fission. The financial and technical resources of the Chicago section continue to contribute to a successful program of public education and public acceptance activities regarding the nuclear industry

Radar cross sections for mesospheric echoes at Jicamarca

Directory of Open Access Journals (Sweden)

G. A. Lehmacher

2009-07-01

Full Text Available Radar cross sections (RCS of mesospheric layers at 50 MHz observed at Jicamarca, Peru, range from 10−18 to 10−16 m−1, three orders of magnitudes smaller than cross sections reported for polar mesospheric winter echoes during solar proton events and six orders of magnitude smaller than polar mesospheric summer echoes. Large RCS are found in thick layers around 70 km that also show wide radar spectra, which is interpreted as turbulent broadening. For typical atmospheric and ionospheric conditions, volume scattering RCS for stationary, homogeneous, isotropic turbulence at 3 m are also in the range 10−18 to 10−16 m−1, in reasonable agreement with measurements. Moreover, theory predicts maximum cross sections around 70 km, also in agreement with observations. Theoretical values are still a matter of order-of-magnitude estimation, since the Bragg scale of 3 m is near or inside the viscous subrange, where the form of the turbulence spectrum is not well known. In addition, steep electron density gradients can increase cross-sections significantly. For thin layers with large RCS and narrow spectra, isotropic turbulence theory fails and scattering or reflection from anisotropic irregularities may gain relevance.

Partial wave analysis for folded differential cross sections

Science.gov (United States)

Machacek, J. R.; McEachran, R. P.

2018-03-01

The value of modified effective range theory (MERT) and the connection between differential cross sections and phase shifts in low-energy electron scattering has long been recognized. Recent experimental techniques involving magnetically confined beams have introduced the concept of folded differential cross sections (FDCS) where the forward (θ ≤ π/2) and backward scattered (θ ≥ π/2) projectiles are unresolved, that is the value measured at the angle θ is the sum of the signal for particles scattered into the angles θ and π - θ. We have developed an alternative approach to MERT in order to analyse low-energy folded differential cross sections for positrons and electrons. This results in a simplified expression for the FDCS when it is expressed in terms of partial waves and thereby enables one to extract the first few phase shifts from a fit to an experimental FDCS at low energies. Thus, this method predicts forward and backward angle scattering (0 to π) using only experimental FDCS data and can be used to determine the total elastic cross section solely from experimental results at low-energy, which are limited in angular range.

Measurement of multinucleon transfer cross-sections

Indian Academy of Sciences (India)

Keywords. Ni(C, ), Fe(C, ), =C, C, B, B, Be, Be, Be, Be, Li, Li; = 60 MeV; measured reaction cross-section; elastic scattering angular distribution; deduced transfer probabilities and enhancement factors.

Evolutionary relationships in Vaccinium section Cyanococcus

Science.gov (United States)

The North American Vaccinium section Cyanococcus includes the ecologically and economically important blueberry species, Vaccinium corymbosum (highbush blueberry), Vaccinium angustifolium (lowbush blueberry), Vaccinium myrtilloides (velvet-leaf blueberry), and Vaccinium virgatum (rabbiteye blueberry...

Second order effects in adjustment processes of cross sections

International Nuclear Information System (INIS)

Silva, F.C. da; D'Angelo, A.; Gandini, A.; Rado, V.

1982-01-01

An iterative processe, that take in account the non linear effects of some integral quantities in relation to cross sections, is used to execute an adjustment of cross sections of some elements that constitute the fast reactors shielding. (E.G.) [pt

Measurement of 76Se and 78Se (γ, n) cross sections

International Nuclear Information System (INIS)

Kitatani, Fumito; Harada, Hideo; Goko, Shinji; Utsunomiya, Hiroaki; Akimune, Hidetoshi; Toyokawa, Hiroyuki; Yamada, Kawakatsu

2011-01-01

The (γ, n) cross sections of Se isotopes ( 76 Se, 78 Se) were measured to supply fundamental data for estimating the inverse reaction cross section, i.e., the 79 Se(n, γ) 80 Se cross section. The enriched samples and a reference 197 Au sample were irradiated with laser-Compton scattering (LCS) γ-rays. The excitation function of each (γ, n) cross section was determined for the energy range from each near neutron separation energy to the threshold energy of (γ, 2n) reaction. The energy point corresponding to each cross section was deduced using the accurately determined energy distribution of LCS γ-rays. Systematic (γ, n) cross sections for Se isotopes including 80 Se were compared with those calculated by using a statistical model calculation code TALYS. (author)

Radar Cross Section (RCS) Simulation for Wind Turbines

Science.gov (United States)

2013-06-01

wind turbines are unsafe to operate. Also, helical wind turbines generally have less environmental concerns such as killing birds , especially in...SECTION (RCS) SIMULATION FOR WIND TURBINES by Cuong Ton June 2013 Thesis Advisor: David C. Jenn Second Reader: Ric Romero THIS PAGE...TITLE AND SUBTITLE RADAR CROSS SECTION (RCS) SIMULATION FOR WIND TURBINES 5. FUNDING NUMBERS 6. AUTHOR(S) Cuong Ton 7. PERFORMING ORGANIZATION

Quality Quantification of Evaluated Cross Section Covariances

International Nuclear Information System (INIS)

Varet, S.; Dossantos-Uzarralde, P.; Vayatis, N.

2015-01-01

Presently, several methods are used to estimate the covariance matrix of evaluated nuclear cross sections. Because the resulting covariance matrices can be different according to the method used and according to the assumptions of the method, we propose a general and objective approach to quantify the quality of the covariance estimation for evaluated cross sections. The first step consists in defining an objective criterion. The second step is computation of the criterion. In this paper the Kullback-Leibler distance is proposed for the quality quantification of a covariance matrix estimation and its inverse. It is based on the distance to the true covariance matrix. A method based on the bootstrap is presented for the estimation of this criterion, which can be applied with most methods for covariance matrix estimation and without the knowledge of the true covariance matrix. The full approach is illustrated on the 85 Rb nucleus evaluations and the results are then used for a discussion on scoring and Monte Carlo approaches for covariance matrix estimation of the cross section evaluations

Study of fast neutron scattering. The displacement cross-section (1962); Etude de la diffusion des neutrons rapides. Section efficace de deplacement (1962)

Energy Technology Data Exchange (ETDEWEB)

Millot, J P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1962-07-01

We propose a method for calculating the biological efficiency of fast neutrons emitted by in-pile fission sources. This method justifies the empirical theory of Albert and Welton. In making simple assumptions concerning the cross-sections, we have supposed that the propagation can ben reduced to a mono-kinetic problem. A system of orthonormal functions is then set up making it possible to calculate the flux leaving a planar source. This method generalises the results obtained by Platzek to the case where the elastic cross-sections are not isotropic, and make it possible in particular to define a displacement cross-section: extension of the diffusion coefficient. This method can be generalised to the case of neutron diffraction as a function of time, and to the study of slowing-down. Numerical results are given in an appendix for the following: H{sub 2}O, D{sub 2}O, Fe, Be, Pb, CH, CH{sub 2}. These cross-sections have been verified experimentally in water and in graphite for neutrons of 2.5 and 14 MeV using a SAMES accelerator and a 2 MeV Van De Graaff. (author) [French] Nous proposons une methode permettant de calculer l'efficacite biologique des neutrons rapides issus des sources de fission dans la protection d'une pile. Cette methode justifie la theorie empirique d'Albert et Welton. En faisant des hypotheses simples sur les sections efficaces, nous avons suppose que la propagation pouvait etre ramenee a un probleme monocinetique. Nous construisons alors un systeme de fonctions orthonormales qui permet de calculer le flux issu d'une source plane. Cette methode generalise les resultats obtenus par Platzek au cas ou les sections efficaces elastiques ne sont pas isotropes et en particulier permet de definir une section efficace de deplacement: extension du coefficient de diffusion. Cette methode peut etre generalisee a la diffusion des neutrons en fonction du temps et a l'etude du ralentissement. Les resultats numeriques sont donnes en annexe pour les corps. H{sub 2

Update to the R33 cross section file format

International Nuclear Information System (INIS)

Vickridge, I.C.

2003-01-01

In September 1991, in response to the workshop on cross sections for Ion Beam Analysis (IBA) held in Namur (July 1991, Nuclear Instruments and Methods B66(1992)), a simple ascii format was proposed to facilitate transfer and collation of nuclear reaction cross section data for Ion Beam Analysis (IBA) and especially for Nuclear Reaction Analysis (NRA). Although intended only as a discussion document, the ascii format - referred to as the R33 (Report 33) format - has become a de facto standard. In the decade since this first proposal there have been spectacular advances in computing power and in software usability, however the cross-platform compatibility of the ascii character set has ensured that the need for an ascii format remains. Nuclear reaction cross section data for Nuclear Reaction analysis has been collected and archived on internet web sites over the last decade. This data has largely been entered in the R33 format, although there is a series of elastic cross sections that are expressed as the ratio to the corresponding Rutherford cross sections that have been entered in a format referred to as RTR (ratio to Rutherford). During this time the R33 format has been modified and added to - firstly to take into account angular distributions, which were not catered for in the first proposal, and more recently to cater for elastic cross sections expressed as the ratio-to- Rutherford, which it is useful to have for some elastic scattering programs. It is thus timely to formally update the R33 format. There also exists the large nuclear cross section data collections of the Nuclear Data Network - of which the core centres are the OECD NEA Nuclear Data Bank, the IAEA Nuclear Data Section, the Brookhaven National Laboratory National Nuclear Data Centre and CJD IPPE Obninsk, Russia. The R33 format is now proposed to become a legal computational format for the NDN. It is thus also necessary to provide an updated formal definition of the R33 format in order to provide

Elective caesarean section at 38 weeks versus 39 weeks

DEFF Research Database (Denmark)

Glavind, Julie; Kindberg, S F; Uldbjerg, N

2013-01-01

To investigate whether elective caesarean section before 39 completed weeks of gestation increases the risk of adverse neonatal or maternal outcomes.......To investigate whether elective caesarean section before 39 completed weeks of gestation increases the risk of adverse neonatal or maternal outcomes....

Cross‑Sectional Studies Published in Indian Journal of Community ...

African Journals Online (AJOL)

of Observational Studies in Epidemiology (STROBE) statement.[2] Items relate to title, abstract, introduction, methods, results and discussion sections of articles. This. Cross‑Sectional Studies Published in Indian Journal of Community Medicine: Evaluation of Adherence to the Strengthening the Reporting of Observational.

[Fast neutron cross section measurements

International Nuclear Information System (INIS)

1991-01-01

In the 14 MeV Neutron Laboratory, we have continued the development of a facility that is now the only one of its kind in operation in the United States. We have refined the klystron bunching system described in last year's report to the point that 1.2 nanosecond pulses have been directly measured. We have tested the pulse shape discrimination capability of our primary NE 213 neutron detector. We have converted the RF sweeper section of the beamline to a frequency of 1 MHz to replace the function of the high voltage pulser described in last year's report which proved to be difficult to maintain and unreliable in its operation. We have also overcome several other significant experimental difficulties, including a major problem with a vacuum leak in the main accelerator column. We have completed additional testing to prove the remainder of the generation and measurement systems, but overcoming some of these experimental difficulties has delayed the start of actual data taking. We are now in a position to begin our first series of ring geometry elastic scattering measurements, and these will be underway before the end of the current contract year. As part of our longer term planning, we are continuing the conceptual analysis of several schemes to improve the intensity of our current pulsed beam. These include the provision of a duoplasmatron ion source and/or the provision of preacceleration bunching. Additional details are given later in this report. A series of measurements were carried out at the Tandem Dynamatron Facility involving the irradiation of a series of yttrium foils and the determination of activation cross sections using absolute counting techniques. The experimental work has been completed, and final analysis of the cross section data will be completed within several months

Fe L-shell Excitation Cross Section Measurements on EBIT-I

Science.gov (United States)

Chen, Hui; Beiersdorfer, P.; Brown, G.; Boyce, K.; Kelley, R.; Kilbourne, C.; Porter, F.; Gu, M. F.; Kahn, S.

2006-09-01

We report the measurement of electron impact excitation cross sections for the strong iron L-shell 3-2 lines of Fe XVII to Fe XXIV at the LLNL EBIT-I electron beam ion trap using a crystal spectrometer and NASA-Goddard Space Flight Center's 6x6 pixel array microcalorimeter. The cross sections were determined by direct normalization to the well-established cross sections for radiative electron capture. Our results include the excitation cross section for over 50 lines at multiple electron energies. Although we have found that for 3C line in Fe XVII the measured cross sections differ significantly from theory, in most cases the measurements and theory agree within 20%. This work was performed under the auspices of the U.S. DOE by LLNL under contract No. W-7405-Eng-48 and supported by NASA APRA grants to LLNL, GSFC, and Stanford University.

Neutron-induced capture cross sections via the surrogate reaction method

International Nuclear Information System (INIS)

Boutoux, G.; Jurado, B.; Aiche, M.; Barreau, G.; Capellan, N.; Companis, I.; Czajkowski, S.; Dassie, D.; Haas, B.; Mathieu, L.; Meot, V.; Bail, A.; Bauge, E.; Daugas, J. M.; Faul, T.; Gaudefroy, L.; Morel, P.; Pillet, N.; Roig, O.; Romain, P.; Taieb, J.; Theroine, C.; Burke, J.T.; Companis, I.; Derkx, X.; Gunsing, F.; Matea, I.; Tassan-Got, L.; Porquet, M.G.; Serot, O.

2011-01-01

The surrogate reaction method is an indirect way of determining cross sections for nuclear reactions that proceed through a compound nucleus. This technique enables neutron-induced cross sections to be extracted for nuclear reactions on short-lived unstable nuclei that otherwise can not be measured. This technique has been successfully applied to determine the neutron-induced fission cross sections of several short-lived nuclei. In this work, we investigate whether this powerful technique can also be used to determine of neutron-induced capture cross sections. For this purpose we use the surrogate reaction 174 Yb( 3 He, pγ) 176 Lu to infer the well known 175 Lu(n, γ) cross section and compare the results with the directly measured neutron-induced data. This surrogate experiment has been performed in March 2010. The experimental technique used and the first preliminary results will be presented. (authors)

Role of frozen section in surgery of benign thyroid

Directory of Open Access Journals (Sweden)

Tomaž Štupnik

2007-04-01

Full Text Available Background: Fine-needle aspiration biopsy can very reliably discriminate between benign and malignant thyroid tumors. The role of additional intraoperative frozen section to guide intraoperative management was questioned.Methods: A retrospective analysis of all thyroid resections at our department between 2000 and 2004 was performed.Results: 420 patients with benign thyroid lesions underwent surgical resections. 169 lobectomies and 251 total thyroidectomies were performed and 57 (13.5 % thyroid cancers discovered (mostly papillary carcinomas. 54 frozen sections were performed and sensitivity rate of 11.1 % and specificity rate of 97.8 % was estimated.Conclusions: Our data supports the fact that intraoperative frozen section is not sensitive enough to substantially add to preoperative fine-needle aspiration biopsy, even with more selective use. We conclude that routine use of frozen section is not cost-effective in surgery of the benign thyroid and can therefore be abandoned.

Theoretical Studies on Photoionization Cross Sections of Solid Gold

International Nuclear Information System (INIS)

Ma Xiaoguang; Sun Weiguo; Cheng Yansong

2005-01-01

Accurate expression for photoabsorption (photoionization) cross sections of high density system proposed recently is used to study the photoionization of solid gold. The results show that the present theoretical photoionization cross sections have good agreement both in structure and in magnitude with the experimental results of gold crystal. The studies also indicate that both the real part ε' and the imaginary part ε'' of the complex dielectric constant ε, and the dielectric influence function of a nonideal system have rich structures in low energy side with a range about 50 eV, and suggest that the influence of particle interactions of surrounding particles with the photoionized particle on the photoionization cross sections can be easily investigated using the dielectric influence function. The electron overlap effects are suggested to be implemented in the future studies to improve the accuracy of theoretical photoionization cross sections of a solid system.

Development of C-band Accelerating Section for SuperKEKB

CERN Document Server

Kamitani, T; Ikeda, M; Kakihara, K; Ohsawa, S; Oogoe, T; Sugimura, T; Takatomi, T; Yamaguchi, S; Yokoyama, K

2004-01-01

For the luminosity upgrade of the present KEK B-factory to SuperKEKB, the injector linac has to increase the positron acceleration energy from 3.5 to 8.0 GeV. In order to double the acceleration field gradient from 21 to 42 MV/m, design studies on C-band accelerator module has started in 2002. First prototype 1-m long accelerating section has been fabricated based upon a design which is half scale of the present S-band section. High power test of the C-band section has been performed at a test stand and later at an accelerator module in the KEKB injector linac. In a beam acceleration test, a field gradient of 41 MV/m is achieved with 43 MW RF power from a klystron. This paper report on the recent status of the high-power test and also the development of a second prototype section.

A phylogenetic reconstruction and emendation of Agaricus section Duploannulatae.

Science.gov (United States)

Challen, Michael P; Kerrigan, Richard W; Callac, Philippe

2003-01-01

Agaricus section Duploannulatae comprises the group of species allied with A. bisporus and A. bitorquis. Disagreement exists in the literature regarding the composition of this group. We used DNA sequence data from the ITS segments of the nuclear ribosomal DNA region, in a sample of European and North American isolates, to identify characters shared by this group, to further delimit species-level taxa within the section, and to develop a phylogenetic hypothesis. Shared polymorphisms that suggest a natural limit for section Duploannulatae were found. ITS1 data were assessed using parsimony, distance and maximum likelihood methods of phylogeny. The section Duploannulatae comprised six robust clades. Five clades corresponded to well characterized species from the temperate Northern Hemisphere (A. bisporus, A. subfloccosus, A. bitorquis, A. vaporarius, A. cupressicola). The sixth clade encompassed an A. devoniensis complex. Species concepts, nomenclature, and relationships are discussed and compared with prior reports.

Elastic neutron-proton differential cross section at 647 MeV

International Nuclear Information System (INIS)

Evans, M.L.

1979-04-01

The differential cross section for n-p elastic scattering in the angular range 51 0 was measured with high statistical accuracy using the 647 MeV monoenergetic neutron beam of the Los Alamos Meson Physics Facility. A proton recoil magnetic spectrometer was used for momentum analysis of the charge exchange protons from the reaction n+p→p+n. Absolute normalization of the cross section was established to within 7% using existing cross section data for the reaction p+p→π + +d. The results differ significantly from previous Dubna and PPA cross sections but agree well with recent Saclay data except at extreme backward angles. 41 references

Adjustement of multigroup cross sections using fast reactor integral data

International Nuclear Information System (INIS)

Renke, C.A.C.

1982-01-01

A methodology for the adjustment of multigroup cross section is presented, structured with aiming to compatibility the limitated number of measured values of integral parameters known and disponible, and the great number of cross sections to be adjusted the group of cross section used is that obtained from the Carnaval II calculation system, understanding as formular the sets of calculation methods and data bases. The adjustment is realized, using the INCOAJ computer code, developed in function of one statistical formulation, structural from the bayer considerations, taking in account the measurement processes of cross section and integral parameters defined on statistical bases. (E.G.) [pt

SPS, preassembly of short straight sections

CERN Multimedia

1975-01-01

Short straight sections were preassembled with their vacuum chambers, ready for installation in the SPS. Here we see two, containing sextupoles for chromaticity adjustment. See also 7501017, 7501018, and Annual Report 1976, p.174.

SPS, short straight section with sextupole

CERN Multimedia

CERN PhotoLab

1975-01-01

Short straight sections were preassembled with their vacuum chambers, ready for installation in the SPS. This one contains a sextupole for chromaticity adjustment. See also 7501017, 7501009X, and Annual Report 1974, p.174.

C-Section Recovery: What to Expect

Science.gov (United States)

... Mood changes. Childbirth triggers a jumble of powerful emotions. Many new moms experience a period of feeling ... labor-and-delivery/in-depth/c-section-recovery/art-20047310 . Mayo Clinic Footer Legal Conditions and Terms ...

a cross-sectional analytic study 2014

African Journals Online (AJOL)

Assessment of HIV/AIDS comprehensive correct knowledge among Sudanese university: a cross-sectional analytic study 2014. ... There are limited studies on this topic in Sudan. In this study we investigated the Comprehensive correct ...

Heavy-Section Steel Technology Program

International Nuclear Information System (INIS)

Pennell, W.E.

1992-11-01

The Heavy-Section Steel Technology (HSST) Program is conducted for the Nuclear Regulatory Commission (NRC) by Oak Ridge National Laboratory (ORNL). The program focus is on the development and validation of technology for the assessment of fracture-prevention margins in commercial nuclear reactor pressure vessels. The HSST Program is organized in 11 tasks: program management, fracture methodology and analysis, material characterization and properties, special technical assistance, fracture analysis computer programs, cleavage-crack initiation, cladding evaluations, pressurized-thermal-shock technology, analysis methods validation, fracture evaluation tests, and warm prestressing. The program tasks have been structured to place emphasis on the resolution fracture issues with near-term licensing significance. Resources to execute the research tasks are drawn from ORNL with subcontract support from universities and other research laboratories. Close contact is maintained with the sister Heavy-Section Steel Irradiation (HSSI) Program at ORNL and with related research programs both in the United States and abroad. This report provides an overview of principal developments in each of the II program tasks from October 1, 1991 to March 31, 1992

Defining SNAP by cross-sectional and longitudinal definitions of neurodegeneration

OpenAIRE

Wisse, L.E.M.; Das, S.R.; Davatzikos, C.; Dickerson, B.C.; Xie, S.X.; Yushkevich, P.A.; Wolk, D.A.

2018-01-01

Introduction: Suspected non-Alzheimer's pathophysiology (SNAP) is a biomarker driven designation that represents a heterogeneous group in terms of etiology and prognosis. SNAP has only been identified by cross-sectional neurodegeneration measures, whereas longitudinal measures might better reflect “active” neurodegeneration and might be more tightly linked to prognosis. We compare neurodegeneration defined by cross-sectional ‘hippocampal volume’ only (SNAP/L−) versus both cross-sectional and ...

Methods for obtaining true particle size distributions from cross section measurements

Energy Technology Data Exchange (ETDEWEB)

Lord, Kristina Alyse [Iowa State Univ., Ames, IA (United States)

2013-01-01

Sectioning methods are frequently used to measure grain sizes in materials. These methods do not provide accurate grain sizes for two reasons. First, the sizes of features observed on random sections are always smaller than the true sizes of solid spherical shaped objects, as noted by Wicksell [1]. This is the case because the section very rarely passes through the center of solid spherical shaped objects randomly dispersed throughout a material. The sizes of features observed on random sections are inversely related to the distance of the center of the solid object from the section [1]. Second, on a plane section through the solid material, larger sized features are more frequently observed than smaller ones due to the larger probability for a section to come into contact with the larger sized portion of the spheres than the smaller sized portion. As a result, it is necessary to find a method that takes into account these reasons for inaccurate particle size measurements, while providing a correction factor for accurately determining true particle size measurements. I present a method for deducing true grain size distributions from those determined from specimen cross sections, either by measurement of equivalent grain diameters or linear intercepts.

Achondroplasia: anaesthetic challenges for caesarean section.

Science.gov (United States)

Dubiel, L; Scott, G A; Agaram, R; McGrady, E; Duncan, A; Litchfield, K N

2014-08-01

Pregnancy in women with achondroplasia presents major challenges for anaesthetists and obstetricians. We report the case of a woman with achondroplasia who underwent general anaesthesia for an elective caesarean section. She was 99cm in height and her condition was further complicated by severe kyphoscoliosis and previous back surgery. She was reviewed in the first trimester at the anaesthetic high-risk clinic. A multidisciplinary team was convened to plan her peripartum care. Because of increasing dyspnoea caesarean section was performed at 32weeks of gestation. She received a general anaesthetic using a modified rapid-sequence technique with remifentanil and rocuronium. The intraoperative period was complicated by desaturation and high airway pressures. The woman's postoperative care was complicated by respiratory compromise requiring high dependency care. Copyright © 2014 Elsevier Ltd. All rights reserved.

Revision of Geranium sections Azorelloida, Neoandina, and Paramensia (Geraniaceae)

NARCIS (Netherlands)

Aedo, C.; Aldasoro, J.J.; Navarro, C.

2002-01-01

The sections Azorelloida, Neoandina, and Paramensia of Geranium, all of them from the Andes, are taxonomically revised. Fruits with the ‘seed ejection-type’ dispersal have been found in all species, which allows classifying them within subg. Geranium. The sections Azorelloida and Paramensia consist

75 FR 1735 - Section 3504 Agent Employment Tax Liability

Science.gov (United States)