OPERATIONAL CIRCULAR NO2 (REV. 1) - APRIL 1998 'CONDITIONS OF ACCESS TO THE FENCED PARTS OF THE CERN SITE'

CERN Multimedia

Human Resources Division

2001-01-01

Subsidiary document 'Implementation Measures' (Rev. 2) - April 2001 The subsidiary document has been amended. Copies are available from Divisional Secretariats and at CERN card issue points. Note : Administrative and operational circulars, as well as the lists of those in force, are available for consultation on WWW : ADMINISTRATIVE CIRCULARS OPERATIONAL CIRCULARS

Administrative Circular No. 22B (Rev. 2) - Compensation for hours of long-term shift work

CERN Multimedia

Department Head Office - HR Department

2016-01-01

Administrative Circular No. 22B (Rev. 2) entitled "Compensation for hours of long-term shift work",  approved by the Director-General following discussion in the Standing Concertation Committee meeting on 22 March 2016, will be available on 1st September 2016 via the following link: https://cds.cern.ch/record/2208538.   This revised circular cancels and replaces Administrative Circular No. 22B (Rev. 1) also entitled "Compensation for hours of long-term shift work" of March 2011. This document contains minor changes to reflect the new career structure. This circular will enter into force on 1st September 2016.

Artículos científicos: tipos, secciones y publicación

OpenAIRE

Reverter Masià, Joaquín; Hernández González, Vicenç

2012-01-01

Las revistas científicas han sido el principal vehículo de transmisión de conocimientos entre los investigadores y la comunidad científica. Investigar y publicar un artículo científico son dos actividades íntimamente relacionadas. Saber los tipos de publicación existentes, las secciones de un artículo y donde publicarlo es el objetivo de este trabajo.

Terminología masorética en la exégesis de Génesis rabba (secciones 'Bere'sit' y Noah')

OpenAIRE

Martín Contreras, Elvira

1999-01-01

[ES] Este articulo examina los ejemplos de interpretaciones rabínicas de las dos primeras secciones (nBéie'Siia y «Noah») de Génesis Rabba, en los que se comentan las características del texto con un lenguaje similar al utilizado en las noticias masoréticas. Después de comprobar dichos ejemplos en listas y tratados masoréticos, se analiza la función de esas interpretaciones dentro de la exégesis de estas dos secciones. Dicho estudio ha permitido comprobar que la intención ex...

Operational circular No.10 – Principles and procedures governing investigation of fraud

CERN Multimedia

2013-01-01

Operational Circular No. 10 entitled “Principles and procedures governing investigation of Fraud”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 4 December 2012 and entering into force on 1 January 2013, is available on the intranet site of the Human Resources Department.   This circular is applicable to all persons working at or on behalf of CERN. The purpose of this new operational circular is to specify the definition of fraud and to lay down the Organization’s fraud investigation process pursuant to the CERN Anti-fraud Policy and in accordance with the principles of due process. Department Head Office HR Department

Circular Coinduction

Science.gov (United States)

Rosu, Grigore; Goguen, Joseph; Norvig, Peter (Technical Monitor)

2001-01-01

Circular coinduction is a technique for behavioral reasoning that extends cobasis coinduction to specifications with circularities. Because behavioral satisfaction is not recursively enumerable, no algorithm can work for every behavioral statement. However. algorithms using circular coinduction can prove every practical behavioral result that we know. This paper proves the correctness of circular coinduction and some consequences.

OPERATIONAL CIRCULAR No. 4 (REV. 1) – USE OF VEHICLES BELONGING TO OR RENTED BY CERN

CERN Document Server

2012-01-01

Operational Circular No. 4 (Rev. 1) entitled “Use of vehicles belonging to or rented by CERN”, approved by the Director-general following discussion in the Standing Concertation Committee meeting of 15 February 2012, is available on the intranet site of the Human Resources Department: https://hr-docs.web.cern.ch/hr-docs/opcirc/opcirc.asp It cancels and replaces Operational Circular No. 4 entitled “Conditions for use by members of the CERN personnel of vehicles belonging to or rented by CERN” of April 2003. This new version enables, in particular, to include CERN contractors and their personnel, to harmonize the structure of the circular with other circulars and to simplify the procedures by permitting electronics forms. Department Head Office HR Department

Publication Of Administrative Circulars: No. 4 (Rev. 4) – Unemployment Insurance Scheme No. 30 (Rev. 2) – Financial Benefits on Taking Up Appointment and on Termination of Contract

CERN Multimedia

HR Department

2008-01-01

Administrative Circular No. 4 (Rev. 4) – Unemployment insurance scheme Administrative Circular No. 4 (Rev. 4) – "Unemployment insurance scheme", approved following discussion in the Standing Concertation Committee meetings of 28 August 2007 and 27 February 2008, is now available on the intranet site of the Human Resources Department. It cancels and replaces Administrative Circular No. 4 (Rev. 3) – "Unemployment insurance" of October 1993. Copies will shortly be available in Departmental secretariats. Human Resources Department Tel. 78003 Administrative Circular No. 30 (Rev. 2) – Financial benefits on taking up appointment and termination of contract Administrative Circular No. 30 (Rev. 2) – "Financial benefits on taking up appointment and termination of contract", approved following discussion in the Standing Concertation Committee meetings of 28 August 2007 and 27 February 2008, is now available on the intranet site of the Human Resources De...

Publication Of Administrative Circulars: No. 4 (Rev. 4) – Unemployment Insurance Scheme No. 30 (Rev. 2) – Financial Benefits on Taking Up Appointment and on Termination of Contract

CERN Document Server

HR Department

2008-01-01

Administrative Circular No. 4 (Rev. 4) – Unemployment insurance scheme Administrative Circular No. 4 (Rev. 4) – "Unemployment insurance scheme", approved following discussion at the Standing Concertation Committee meetings of 28 August 2007 and 27 February 2008, is now available on the intranet site of the Human Resources Department. It cancels and replaces Administrative Circular No. 4 (Rev. 3) – "Unemployment insurance" of October 1993. Copies will shortly be available in Departmental secretariats. Human Resources Department Tel. 78003 Administrative Circular No. 30 (Rev. 2) – Financial benefits on taking up appointment and termination of contract Administrative Circular No. 30 (Rev. 2) – "Financial benefits on taking up appointment and termination of contract", approved following discussion at the Standing Concertation Committee meetings of 28 August 2007 and 27 February 2008, is now available on the intranet site of the Human Resources De...

ADMINISTRATIVE CIRCULAR NO. 20 USE OF PRIVATE VEHICLES FOR OFFICIAL DUTY - INSURANCE

CERN Multimedia

Human Resources Division - Tel. 73634

2002-01-01

Administrative Circular No. 20 on the use of private vehicles for official duty is shortly to be revised with a view to making certain procedures more flexible. CERN no longer requires members of the personnel to take out optional private insurances (insurance for official journeys, legal assistance insurance) in the case of duty travel for the Organization, since the associated risks are covered by CERN's own insurance. Pending the above mentioned revision, members of the personnel may continue to use their private vehicles for official duty in accordance with the others provisions laid down in the Circular Reminder: Owners of private vehicles must of course be insured by the normal compulsory car insurance required by the laws of the Host States when driving on and off the CERN sites.

78 FR 59726 - Interim Final Appendix D of OMB Circular No. A-123, “Management's Responsibility for Internal...

Science.gov (United States)

2013-09-27

... Management Systems'' September 27, 2013. ACTION: Notice. SUMMARY: OMB Circular No. A-123, ``Management's Responsibility for Internal Control,'' defines management's responsibility for internal control in Federal... OFFICE OF MANAGEMENT AND BUDGET Interim Final Appendix D of OMB Circular No. A-123, ``Management's...

7 CFR Appendix B to Part 3015 - OMB Circular A-128, “Audits of State and Local Governments”

Science.gov (United States)

2010-01-01

... claims for advances and reimbursements; —Negative assurance on those items not tested; —A summary of all... 7 Agriculture 15 2010-01-01 2010-01-01 false OMB Circular A-128, âAudits of State and Local... Pt. 3015, App. B Appendix B to Part 3015—OMB Circular A-128, “Audits of State and Local Governments...

Administrative Circular No. 14 (Rev. 2)

CERN Document Server

HR Department

2007-01-01

The HR Department wishes to draw the attention of members of the personnel to a number of amendments to Administrative Circular No. 14 (Rev. 2) entitled "Protection of members of the personnel against the financial consequences of illness, accident and disability" which came into force on 1st July 2006 (cf. Weekly Bulletin of 14 and 21 August 2006). Occupational Accident Declaration Form (HS50) https://cern.ch/service-procedures/AdminMan/Forms/HS50E.doc •\tIt must be completed within 10 working days of the date on which the accident occurred (§ 29.2.1), unless the person concerned is materially unable to meet this deadline. • The completed formula must be accompanied by a medical certificate giving details of any bodily injuries resulting from the accident (Annex 1, § 5). The medical certificate must be obtained from the doctor who has been consulted for that purpose. Benefits resulting from illnesses and accidents Medical treatment will cease to be reimbursed under ...

Administrative circular No. 20 (Rev. 2) – Use of private vehicules for journeys on official duty

CERN Multimedia

HR Department

2011-01-01

Administrative Circular No. 20 (Rev. 2) entitled "Use of private vehicles for journeys on official duty", adopted following discussion in the Standing Concertation Committee meeting of 21 September 2010 and entering into force on 1 January 2011, is available on the intranet site of the Human Resources Department: http://cern.ch/hr-docs/admincirc/admincirc.asp It cancels and replaces Administrative Circular No. 20 (Rev. 1) entitled "Use of private vehicles on official duty" of April 1993. This new version introduces, in particular, the payment of a kilometer allowance in case of emergency during standby duty or when on call and a simplified calculation of the allowance for journeys between sites. This circular also clarifies the type of permitted private vehicles. Department Head Office  

Administrative Circular No. 2 (Rev. 7) - Recruitment, appointment and possible developments regarding the contractual position of staff members

CERN Multimedia

2015-01-01

Administrative Circular No. 2 (Rev. 7), entitled "Recruitment, appointment and possible developments regarding the contractual position of staff members", approved by the Director-General following discussion at the Standing Concertation Committee meeting held on 17 February 2015 is available via the following link: AC No. 2 (Rev.7).   This revised circular cancels and replaces Administrative Circular No. 2 (Rev. 6), entitled "Recruitment, appointment and possible developments regarding the contractual position of staff members" and dated January 2015. The circular was revised in order to implement the amendment to Article R II 1.17 of the Staff Regulations, which introduces the possibility of extending limited-duration (LD) contracts up to a maximum total duration of eight years from the previous duration of five years. The award of indefinite contracts will continue to be subject to the outcome of a competitive process. Department Head Of...

Administrative Circular No. 30 (Rev. 3) - “Financial benefits on taking up appointment and on termination of contract”

CERN Multimedia

2013-01-01

Administrative Circular No. 30 (Rev. 3) entitled “Financial benefits on taking up appointment and on termination of contract”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 27 June 2013 and entering into force on 1 August 2013, is available on the intranet site of the Human Resources Department (see here).   Administrative Circular No. 30 (Rev. 3) is applicable to all members of the personnel. It cancels and replaces Administrative Circular No. 30 (Rev. 2/Corr.) entitled "Financial benefits on taking up appointment and on termination of contract” of September 2009. This circular was revised in order to implement the modifications introduced into the Staff Rules and Regulations in January 2013 relating to the introduction of the status of Associate Member States and new categories of associated members of the personnel. In particular, the notion of “Member State” in Annexe II (&a...

Publication of administrative circular

CERN Multimedia

HR Department

2009-01-01

ADMINISTRATIVE CIRCULAR NO. 23 (REV. 2) – SPECIAL WORKING HOURS Administrative Circular No. 23 (Rev. 2) entitled "Special working hours", approved following discussion in the Standing Concertation Committee on 9 December 2008, will be available on the intranet site of the Human Resources Department as from 19 December 2008: http://cern.ch/hr-docs/admincirc/admincirc.asp It cancels and replaces Administrative Circular No. 23 (Rev. 1) entitled "Stand-by duty" of April 1988. A "Frequently Asked Questions" information document on special working hours will also be available on this site. Paper copies of this circular will shortly be available in Departmental Secretariats. Human Resources Department Tel. 78003

PUBLICATION OF ADMINISTRATIVE CIRCULAR

CERN Multimedia

HR Department

2008-01-01

ADMINISTRATIVE CIRCULAR NO. 23 (REV. 2) – SPECIAL WORKING HOURS Administrative Circular No. 23 (Rev. 2) entitled "Special working hours", approved following discussion in the Standing Concertation Committee meeting of 9 December 2008, will be available on the intranet site of the Human Resources Department as from 19 December 2008: http://cern.ch/hr-docs/admincirc/admincirc.asp It cancels and replaces Administrative Circular No. 23 (Rev. 1) entitled "Stand-by duty" of April 1988. A "Frequently Asked Questions" information document on special working hours will also be available on this site. Paper copies of this circular will shortly be available in departmental secretariats. Human Resources Department Tel. 78003

Gradually varied flow in compound open channels; Flujo gradualmente variado en canales de seccion compuesta

Energy Technology Data Exchange (ETDEWEB)

Sotela Avila, Gilberto [Universidad Nacional Autonoma de Mexico (Mexico)

2001-03-01

The author shows that the computation of gradually-varied-flow profiles in prismatic compound channels involves the solution of the dynamic equation, but using the compound channel Froude number defined by Blalock and Sturm. The same equation is used for non-prismatic channels by dividing the channel into short reaches and carrying the computation step by step through an iterative process. [Spanish] El autor demuestra que los perfiles del flujo gradualmente variado en canales prismaticos de seccion compuesta se pueden determinar mediante la integracion de la llamada ecuacion dinamica, pero usando el numero de Froude definido por Blalock y Sturm para este tipo de canales. Cuando no son prismaticos, tambien se aplica la ecuacion de la energia por tramos y el calculo sigue un proceso iterativo una vez definidos los tirantes criticos multiples y la zona en que se desarrolla el perfil.

San Pedro de la Paz: elementos del patrimonio natural estructurantes del paisaje urbano, seccional El Venado

Directory of Open Access Journals (Sweden)

Leonel Pérez Bustamante

2003-09-01

Full Text Available El proyecto Plan Seccional El Venado se circunscribe en la intención de desarrollar un proyecto inmobiliario de gran extensión territorial en las mesetas de la Cordillera de Nahuelbuta, comuna de San Pedro de la Paz, en el denominado fundo El Venado.

Design for Circular Behaviour: Considering Users in a Circular Economy

Directory of Open Access Journals (Sweden)

Thomas Wastling

2018-05-01

Full Text Available In a linear economy, a product is manufactured and sold to a customer. Then, little concern is given to what the user actually does with it when they have it. However, in a circular economy where the aim is to circulate products at their highest level of value, the customer’s behaviour can become an important part of the system. Circular design strategies have tended to focus on the physical aspects of a product (e.g., disassembly, material selection, but the design of products and services can also have an influence on user behaviour and, to date, this aspect of circular design has not been fully explored. This project aims to define what key user behaviours are required for circular business models to work and to outline how design can enable these ‘circular behaviours’. This research project consists of a literature review, case study analysis and expert interviews with practitioners. A theoretical framework for designing products and services to encourage circular behaviour is developed. This work provides an initial step towards a better understanding of the user’s role in the transition to a circular economy as well as a preliminary model for how design for behaviour change strategies could be implemented in this context.

Dimensionamiento de secciones de hormigón armado orientado a garantizar un nivel de ductilidad

Directory of Open Access Journals (Sweden)

Mari Bernat, Antonio R.

1987-06-01

Full Text Available The convenience of satisfying a ductility condition at critical sections of reinforced concrete frames and continuos beams in order to avoid local failures under low loading levéis is discussed in this paper. The behaviour of rectangular reinforced concrete sections subjected to bending and axial load in ultimate limit state is studied, and direct analytical relationships between the relative depth of neutral axis x/d and the difference of tension and compression reinforcement mechanical ratios are obtained. Finally a method for the design of the reinforcement necessary to resist a bending moment with a given ductility level, in terms of x/d or w-w' is presented. The method is applied to practical cases and its interest is shown since much more ductile structures are designed without increase in the cost and in the construction difficulties.

En este artículo se plantea la conveniencia de garantizar un mínimo de ductilidad en las secciones críticas de pórticos y vigas continuas de hormigón armado, para evitar roturas localizadas bajo niveles de carga inferiores al de proyecto. Se aborda el estudio analítico de secciones rectangulares de hormigón armado sometidas a flexión en estado límite último, obteniéndose una relación analítica directa entre la profundidad de la fibra neutra x/d y la diferencia de cuantías mecánicas de armaduras de tracción y compresión. último, se propone un método para el dimensionamiento de armaduras en secciones de hormigón armado que garantice unas condiciones de ductilidad prefijadas, establecidas en términos de profundidad máxima de la fibra neutra o bien de diferencia de cuantías. El método se aplica a algún caso práctico, demostrándose el interés del mismo, ya que se consiguen estructuras mucho más dúctiles sin incremento de coste alguno y de ejecución más sencilla.

Administrative Circular No. 2 (Rev. 6) – Recruitment, appointment and possible developments regarding the contractual position of staff members (1 January 2015)

CERN Multimedia

2014-01-01

Administrative Circular No. 2 (Rev. 6) entitled "Recruitment, appointment and possible developments regarding the contractual position of staff members", approved by the Director-General following discussion in the Standing Concertation Committee meeting on 27 November 2014 is available on the Human Resources Department website. It cancels and replaces Administrative Circular No. 2 (Rev. 5) entitled "Recruitment, appointment and possible developments regarding the contractual position of staff members" of September 2011. This circular was revised in order to improve the effectiveness of the career transition measures, in particular by expanding the scope of the programme to include also career transition within the Organization and by placing emphasis on career orientation and job search. Administrative Circular No. 2 will be further revised next year with the adoption of the new contract policy, subject to approval of the relevant amendments by all competent bodies. ...

Group cross-sections for fast reactors; Sections efficaces de groupes pour les reacteurs a neutrons rapides; Gruppovye secheniya reaktorov na bystrykh nejtronakh; Secciones eficaces de grupos para reactores rapidos

Energy Technology Data Exchange (ETDEWEB)

Zweifel, P P [University of Michigan, Ann Arbor, MI (United States); Ball, G L [Atomic Power Development Associates, Inc., Detroit, MI (United States)

1962-03-15

, comme c'est souvent le cas, la section efficace de groupe en terme d'integrales de resonance efficace, mais qu'il faut modifier cette definition suivant le type de schema multigroupe utilise. (author) [Spanish] La memoria discute en terminos generales las ecuaciones de difusion de grupos multiples y la forma correcta de las secciones eficaces correspondientes . En particular, demuestra que la seccion eficaz media de transporte puede expresarse con bastante precision en terminos de un promedio de recorridos libres medios. Esta magnitud es dificil de calcular porque no se puede expresar en funcion de promedios elementales ; sin embargo, se demuestran varias desigualdades que simplifican el procedimiento de determinacion de promedios. La memoria discute otros tres aspectos de las secciones eficaces de grupos que con frecuencia se ignoran, pero que pueden ser importantes al estudiar detalladamente un diseno. a) El empleo de los mismos valores medios correspondientes a las secciones eficaces de grupos para todos los reactores rapidos no se justifica si los espectros de los diferentes reactores no son similares y si las secciones eficaces varian rapidamente dentro del grupo, como ocurre a menudo. Los autores describen un metodo de iteracion, que permite obtener valores medios correctos y determinar en que medida los efectos espectrales ejercen influencia sobre los calculos de reactores. b) En los calculos de transporte (metodo S{sub n} por ejemplo), los promedios deben evaluarse en funcion del angulo y de la energia. Como el flujo no es separable en una parte angulo y en una parte energetica, es necesario proceder con sumo cuidado para evitar errores. La ecuacion S{sub n} se estudia sobre la base de un modelo sencillo, y de este estudio se deduce un criterio que puede ser de utilidad al determinar la importancia de la no-separabilida d angular en los calculos de reactores. c) Basandose en los argumentos de conservacion neutronica, se deriva una relacion de compatibilidad

10 CFR 760.1 - Uranium leases on lands controlled by DOE. (Domestic Uranium Program Circular No. 760.1, formerly...

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Uranium leases on lands controlled by DOE. (Domestic Uranium Program Circular No. 760.1, formerly (AEC) Domestic Uranium Program Circular 8, 10 CFR 60.8). 760.1 Section 760.1 Energy DEPARTMENT OF ENERGY DOMESTIC URANIUM PROGRAM § 760.1 Uranium leases on lands...

Administrative circular No. 2 (Rev. 5) – Recruitment, appointment and possible developments regarding the contractual position of staff members

CERN Document Server

HR Department

2011-01-01

Administrative Circular No. 2 (Rev. 5) entitled "Recruitment, appointment and possible developments regarding the contractual position of staff members", approved by the Director-General following discussion in the Standing Concertation Committee meeting on 1 September 2011, is available on the intranet site of the Human Resources Department: https://cern.ch/hr-docs/admincirc/admincirc.asp It cancels and replaces Administrative Circular No. 2 (Rev. 4) entitled "Recruitment, appointment and possible developments regarding the contractual position of staff members" of September 2009. Department Head Office

Compliance with Operational Circular No. 2 on conditions of access to the fenced CERN sites

CERN Multimedia

Relations with the Host States Service

2004-01-01

The purpose of Operational Circular No. 2 is to contribute to the protection of people and property by defining the conditions of access to the Organization's fenced sites. However, recently, the services concerned have noted a significant increase in the instances of non-compliance with those conditions that cannot be tolerated, for example: use of CERN access cards by people, other than the cardholders themselves, in order to gain access to facilities without having attended the required safety course; speeding, particularly on Route Gregory and Route Weisskopf; driving in and out of the site on the wrong side of the road; parking on spaces set aside for the disabled; nuisance parking, especially in the proximity of the Restaurants; the dumping of wrecked vehicles. As the aforementioned instances of non-compliance can lead to dangerous situations, the Organization reserves the right to apply the penalties provided for under paragraph 26 of Operational Circular No. 2, namely to refuse access to the site...

Circular arc structures

KAUST Repository

Bo, Pengbo; Pottmann, Helmut; Kilian, Martin; Wang, Wen Ping; Wallner, Johannes

2011-01-01

and connecting elements as well as repetition of costly parts. This paper proposes so-called circular arc structures as a means to faithfully realize freeform designs without giving up smooth appearance. In contrast to non-smooth meshes with straight edges where

Radical Circular Economy

NARCIS (Netherlands)

Prins, M.; Mohammadi, S.; Slob, N.

2015-01-01

Recently the Circular Economy (CE) concept has gained momentum in the Netherlands, propounding that environmental impact reduction can provide a significant positive economical impulse. The government, larger parts of the industry as a whole, as well as the construction industry, has warmly received

ADMINISTRATIVE CIRCULAR No. 25 (REV. 3) - Special provisions for the fire and rescue service governing working and rest time

CERN Multimedia

2012-01-01

Administrative Circular No. 25 (Rev. 3) entitled “Special provisions for the Fire and Rescue Service governing working and rest time”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 28 September 2012 and entering into force in October 2012, is available on the intranet site of the Human Resources Department: http://cern.ch/hr-docs/admincirc/admincirc.asp This Circular is applicable to staff members of the Fire and Rescue Service It cancels and replaces Administrative Circular No. 25 (Rev. 2) entitled “Shift work – Special provisions for the Fire and Rescue Service” of April 2003. This new version takes into account the new organisation of the Fire and Rescue Service, members of which will henceforth not exclusively perform their functions in the context of shift work, but also during reference working hours and during stand-by duty. Additionally, applicable limits regarding working and rest times an...

Circular arc structures

KAUST Repository

Bo, Pengbo

2011-07-01

The most important guiding principle in computational methods for freeform architecture is the balance between cost efficiency on the one hand, and adherence to the design intent on the other. Key issues are the simplicity of supporting and connecting elements as well as repetition of costly parts. This paper proposes so-called circular arc structures as a means to faithfully realize freeform designs without giving up smooth appearance. In contrast to non-smooth meshes with straight edges where geometric complexity is concentrated in the nodes, we stay with smooth surfaces and rather distribute complexity in a uniform way by allowing edges in the shape of circular arcs. We are able to achieve the simplest possible shape of nodes without interfering with known panel optimization algorithms. We study remarkable special cases of circular arc structures which possess simple supporting elements or repetitive edges, we present the first global approximation method for principal patches, and we show an extension to volumetric structures for truly threedimensional designs. © 2011 ACM.

Administrative Circulars

CERN Document Server

Département des Ressources humaines

2004-01-01

Administrative Circular N° 2 (Rev. 2) - May 2004 Guidelines and procedures concerning recruitment and probation period of staff members This circular has been revised. It cancels and replaces Administrative Circular N° 2 (Rev. 1) - March 2000. Administrative Circular N° 9 (Rev. 3) - May 2004 Staff members contracts This circular has been revised. It cancels and replaces Administrative Circular N° 9 (Rev. 2) - March 2000. Administrative Circular N° 26 (Rev. 4) - May 2004 Procedure governing the career evolution of staff members This circular has also been revised. It Administrative Circulars Administrative Circular N° 26 (Rev. 3) - December 2001 and brings up to date the French version (Rev. 4) published on the HR Department Web site in January 2004. Operational Circular N° 7 - May 2004 Work from home This circular has been drawn up. Operational Circular N° 8 - May 2004 Dealing with alcohol-related problems...

REMINDER - Compliance with Operational Circular No. 2 on conditions of access to the fenced CERN sites

CERN Multimedia

Relations with the Host States Service

2004-01-01

The purpose of Operational Circular No. 2 is to contribute to the protection of people and property by defining the conditions of access to the Organization's fenced sites. However, recently, the services concerned have noted a significant increase in the instances of non-compliance with those conditions that cannot be tolerated, for example: use of CERN access cards by people, other than the cardholders themselves, in order to gain access to facilities without having attended the required safety course; speeding, particularly on Route Gregory and Route Weisskopf; driving in and out of the site on the wrong side of the road; parking on spaces set aside for the disabled; nuisance parking, especially in the proximity of the Restaurants; the dumping of wrecked vehicles. As the aforementioned instances of non-compliance can lead to dangerous situations, the Organization reserves the right to apply the penalties provided for under paragraph 26 of Operational Circular No. 2, namely to refuse access to the site ...

48 CFR 39.000 - Scope of part.

Science.gov (United States)

2010-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY 39.000 Scope of part. This part prescribes acquisition policies and procedures for use in acquiring— (a) Information technology, including financial management systems, consistent with other parts of this regulation, OMB Circular No. A-127, Financial Management...

Evolución del Programa de Control de Tuberculosis en el Servicio Seccional de Salud del Meta

Directory of Open Access Journals (Sweden)

Pedro Pablo Velásquez Rico

1990-04-01

Full Text Available

La Academia Nacional de Medicina y el Ministerio de Salud patrocinaron en la sede de nuestra Corporación, un Seminario Coordinado por el académico doctor Gilberto Rueda Pérez, para estudiar el estado actual de la Campana contra la Tuberculosis en el país y optimizar las labores que en este caso se adelantan.
Corno reconocimiento y estímulo al trabajo más completo y objetivo de los presentados en este certamen. publicamos el estudio que sobre la lucha anti-tuberculosa en el Meta. realizó la delegación de este Departamento. Médico Coordinador:’ Dr. Velásquez.

Prólogo
Dentro del marco del XII CURSO DE EPIDEMIOLOGIA y CONTROL DE LA TUBERCULOSIS, para médicos, enfermeras y bacteriólogas realizado del 3 al 30 de octubre de 1988, en el Hospital Santa Clara, organizado por la sección de Transmisibles del Ministerio de Salud a cargo del Doctor Guido Chaves Montagno; se llevó también a cabo el XVIII SEMINARIO NACIONAL DE EVALUACION DEL PROGRAMA DE TUBERCULOSIS, en el cual cada Servicio Seccional de Salud presentó un trabajo para concurso, mostrando la evolución del programa del año 1982 a 1987.

Concurso en el cual el primer puesto le fue otorgado al Programa de Control de Tuberculosis del Servicio Seccional de Salud del Meta: este trabajo es el que a continuación se presenta. Quiere el Coordinador del Programa en el Meta, presentar agradecimientos al Ministerio de Salud y al Instituto Nacional de Salud por el gran apoyo que siempre se le ha brindado; lo mismo ljue a todos los funcionarios del Servicio Seccional de Salud, como a los de los diferentes organismos de salud del Departamento y un reconocimiento muy especial a todo el grupo de Tuberculosis del Hospital San Antonio de Villavicencio, donde funciona el Consultorio de Vías Respiratorias; ya que gracias a su activa participación en las diferentes actividades del Programa es quc se

El mejoramiento de la gestión del talento humano a través del empowerment en las micro, pequeñas y medianas empresas, transformadoras de alimentos afiliadas a ACOPI seccional Nariño

OpenAIRE

Mora Gómez, Nelson Armando

2011-01-01

Tesis de grado (Maestría en Gerencia del Talento Humano). Universidad de Manizales. Facultad de Ciencias Sociales y Humanas, 2011 Uno de los propósitos de esta investigación fue conocer la situación en materia de Gestión del Talento Humano en las pymes del sector alimentos afiliadas a ACOPI seccional Nariño, se tomo como referencica 6 empresas de la ciudad de Pasto, que estuvieron dispuestas a ser parte del estudio. Desde la Gestión del Talento Humano se tuvo en cuenta principalmente los p...

Breaking the fault tree circular logic

International Nuclear Information System (INIS)

Lankin, M.

2000-01-01

Event tree - fault tree approach to model failures of nuclear plants as well as of other complex facilities is noticeably dominant now. This approach implies modeling an object in form of unidirectional logical graph - tree, i.e. graph without circular logic. However, genuine nuclear plants intrinsically demonstrate quite a few logical loops (circular logic), especially where electrical systems are involved. This paper shows the incorrectness of existing practice of circular logic breaking by elimination of part of logical dependencies and puts forward a formal algorithm, which enables the analyst to correctly model the failure of complex object, which involves logical dependencies between system and components, in form of fault tree. (author)

Circular geodesic of Bardeen and Ayon-Beato-Garcia regular black-hole and no-horizon spacetimes

Science.gov (United States)

Stuchlík, Zdeněk; Schee, Jan

2015-12-01

In this paper, we study circular geodesic motion of test particles and photons in the Bardeen and Ayon-Beato-Garcia (ABG) geometry describing spherically symmetric regular black-hole or no-horizon spacetimes. While the Bardeen geometry is not exact solution of Einstein's equations, the ABG spacetime is related to self-gravitating charged sources governed by Einstein's gravity and nonlinear electrodynamics. They both are characterized by the mass parameter m and the charge parameter g. We demonstrate that in similarity to the Reissner-Nordstrom (RN) naked singularity spacetimes an antigravity static sphere should exist in all the no-horizon Bardeen and ABG solutions that can be surrounded by a Keplerian accretion disc. However, contrary to the RN naked singularity spacetimes, the ABG no-horizon spacetimes with parameter g/m > 2 can contain also an additional inner Keplerian disc hidden under the static antigravity sphere. Properties of the geodesic structure are reflected by simple observationally relevant optical phenomena. We give silhouette of the regular black-hole and no-horizon spacetimes, and profiled spectral lines generated by Keplerian rings radiating at a fixed frequency and located in strong gravity region at or nearby the marginally stable circular geodesics. We demonstrate that the profiled spectral lines related to the regular black-holes are qualitatively similar to those of the Schwarzschild black-holes, giving only small quantitative differences. On the other hand, the regular no-horizon spacetimes give clear qualitative signatures of their presence while compared to the Schwarschild spacetimes. Moreover, it is possible to distinguish the Bardeen and ABG no-horizon spacetimes, if the inclination angle to the observer is known.

Administrative circular No.14 (Rev. 3) – Protection of members of the personnel against the financial consequences of illness, accident and incapacity for work

CERN Multimedia

2013-01-01

Administrative Circular No. 14 (Rev. 3) entitled “Protection of members the personnel against the financial consequences of illness, accident and incapacity for work”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 19 April 2012 and entering into force on 1 January 2013, is available on the intranet site of the Human Resources Department.   This circular is applicable to all members of the personnel. It cancels and replaces Administrative Circular No. 14 (Rev. 2) entitled “Protection of members of the personnel against the financial consequences of illness, accident and disability” from July 2006. The circular was revised in order to improve the procedure before the Joint Advisory Rehabilitation and Disability Board (JARDB) and the management of long-term sick leave through a multidisciplinary approach launched upstream. The aim of this approach is to allow staff/fellows c...

Diseño y análisis de perfiles estructurales de madera densificada conformada con refuerzos de fibras

OpenAIRE

Cabrero, J. (J.M.); Heiduschke, A. (A.); Haller, P. (P.)

2009-01-01

La sociedad es cada vez más consciente del valor de los recursos naturales, y por ello demanda un uso eficiente de los mismos. Ése ha de ser también un objetivo al diseñar estructuras de madera. Habitualmente se emplean secciones macizas, circulares o rectangulares, que no obtienen un comportamiento óptimo, y que por tanto no aprovechan al máximo las propiedades y posibilidades de la madera. En el Instituto de Construcción en Madera de la Universidad Tecnológica de Dresd...

Circular RNAs as Promising Biomarkers: A mini-review

Directory of Open Access Journals (Sweden)

Nadiah Abu

2016-08-01

Full Text Available The interest in circular RNAs has resurfaced in the past few years. What was considered as junk for nearly two decades is now one of the most interesting molecules. Circular RNAs are non-coding RNAs that are formed by back-splicing events and have covalently closed loops with no poly-adenylated tails. The regulation of circular RNAs is distinctive and they are selectively abundant in different types of tissues. Based on the current knowledge of circular RNAs, these molecules have the potential to be the next big thing especially as biomarkers for different diseases. This mini-review attempts to concisely look at the biology of circular RNAs, the putative functional activities, the prevalence of circular RNAs, and the possible role of circular RNA as biomarkers for diagnosis or measuring drug response.

Cálculo en agotamiento de secciones de fábrica reforzadas a flexión con láminas de FRP

Directory of Open Access Journals (Sweden)

Martínez, S.

2015-12-01

Full Text Available Masonry structures can hardly resist tensile loads. For this reason these structures are vulnerable to accidental actions, such as earthquakes, or when they suffer damage that change their geometry conditions, for instead, due to differential soil settlements. This paper presents an ultimate limit state method for checking FRP-strengthened unreinforced masonry sections. The method is similar to the one used for reinforced concrete members, but it is adapted to masonry and FRP laminates particularities. In this proposal a bilinear strength-strain relationship is used and the FRP design strain is limited to take into account different aspects which cause the plate can’t reach its ultimate strength. In particular, it is proposed a “bond reduction factor”, derived from a large bending test database.Las estructuras de fábrica apenas tienen capacidad para resistir tracciones lo que las hace vulnerables ante acciones desestabilizantes de tipo accidental, como terremotos, o cuando sufren daños que alteran su geometría, por ejemplo, por asientos diferenciales. En este trabajo se presenta un método para la comprobación en agotamiento de secciones de fábrica reforzadas a flexión con láminas de FRP. Está basado en el procedimiento de cálculo de la capacidad resistente de secciones de hormigón pero adaptado a las particularidades y condicionantes de las fábricas reforzadas. En esta propuesta se utiliza un diagrama de cálculo tensión deformación de la fábrica de tipo bilineal y se limita la deformación de cálculo del refuerzo teniendo en consideración ciertos aspectos que provocan que no pueda desarrollar toda su resistencia. En concreto, se propone un «coeficiente reductor por adherencia» que se determina a partir de una amplia base de datos con ensayos de flexión.

Algoritmo para generar formulas de características geométricas de las secciones planas, su implementación en DERIVE // Algorithm for the calculation of the geometric characteristics of the plane sections defined for polygonal, their implementation in DERI

Directory of Open Access Journals (Sweden)

Rolando Rivero-Galán

2010-01-01

Full Text Available ResumenEn la esfera del diseno de estructuras y de elementos de maquinas, se presenta con relativafrecuencia el calculo de determinadas caracteristicas o propiedades geometricas de seccionesplanas, como son entre otras: el area de una seccion transversal, el centro de gravedad, unmomento de inercia o mas general la determinacion de alguna caracteristica geometrica definidapor una integral doble extendida en la region del plano que ocupa la seccion, pieza o elemento.El presente trabajo tiene como objetivo la confeccion de un programa para computadora,utilizando el asistente matematico DERIVE, para la determinacion de las caracteristicas geometricasde secciones planas cuyo contorno este constituido por segmentos de rectas.Palabras claves: Algoritmo, seccion plana, DERIVE, momentos, centro de gravedad.______________________________________________________________AbstractIn the sphere of the design of structures, is relative frequency the calculation of certaincharacteristic or geometric properties of plane sections, like: the area of a traverse section, thecenter of gravity, a moment of inertia or more general the determination of some geometriccharacteristic defined by a double integral extended in the region of the plane that occupies thesection, piece or element.The present work has as objective the making of a program for computer, using the mathematicalassistant DERIVE, for the determination of the geometric characteristics of plane sections whosecontour this constituted by segments of right.Key words: Algorithm, plane section, DERIVE, moments, center of gravity

Supermarkets and unhealthy food marketing: An international comparison of the content of supermarket catalogues/circulars.

Science.gov (United States)

Charlton, Emma L; Kähkönen, Laila A; Sacks, Gary; Cameron, Adrian J

2015-12-01

Supermarket marketing activities have a major influence on consumer food purchases. This study aimed to assess and compare the contents of supermarket marketing circulars from a range of countries worldwide from an obesity prevention perspective. The contents of supermarket circulars from major supermarket chains in 12 non-random countries were collected and analysed over an eight week period from July to September 2014 (n=89 circulars with 12,563 food products). Circulars were largely English language and from countries representing most continents. Food products in 25 sub-categories were categorised as discretionary or non-discretionary (core) food or drinks based on the Australian Guide to Healthy Eating. The total number of products in each subcategory in the whole circular, and on front covers only, was calculated. Circulars from most countries advertised a high proportion of discretionary foods. The only exceptions were circulars from the Philippines (no discretionary foods) and India (11% discretionary food). Circulars from six countries advertised more discretionary foods than core foods. Front covers tended to include a much greater proportion of healthy products than the circulars overall. Supermarket circulars in most of the countries examined include a high percentage of discretionary foods, and therefore promote unhealthy eating behaviours that contribute to the global obesity epidemic. A clear opportunity exists for supermarket circulars to promote rather than undermine healthy eating behaviours of populations. Governments need to ensure that supermarket marketing is included as part of broader efforts to restrict unhealthy food marketing. Copyright © 2015 Elsevier Inc. All rights reserved.

Lung Cancer-Specific Circular RNAs as Biomarkers

Science.gov (United States)

2017-08-01

determine whether differential expression of circular RNAs can also be detected in cell culture models. Third, we will determine whether circular RNAs can...four of them as representative differentially expressed circRNAs in Table 1. For example , hsa_circRNA_400633 and hsa_circRNA_101100 were upregulated...sequence for hsa_circRNA_400633 and hsa_circRNA_101100, as shown in Figs. 1 and 2 as an example . The top part is the actual sequence and the

Pensamiento social en estudiantes del programa de derecho de la Fundación Universitaria del Área Andina Seccional Pereira

OpenAIRE

Muñoz Guzmán, Blanca Elena

2016-01-01

La finalidad de la presente investigación consiste en comprender, analizar, categorizar e interpretar las habilidades de pensamiento social que se identifican a través de la ejecución de una unidad didáctica integral y completa sobre el concepto de seguridad social, concretamente en su componente de pensión de vejez en el régimen de prima media con prestación definida en los estudiantes de sexto semestre del programa de Derecho de la Fundación Universitaria del Área Andina Seccional Pereira. ...

Propuesta de un modelo de gestión integral para la Universidad de San Buenaventura seccional Medellín

OpenAIRE

Castaño Gutiérrez, Valentina

2014-01-01

Ubicación en Biblioteca USB Medellín (San Benito): CD-3101t .--Grupo de Investigación en Estudios Interdisciplinarios sobre Educación (ESINED).-- Línea de Investigación: Gestión Educativa - Currículo.-- Área: gestión universitaria.--Tema: modelo de gestión El objetivo de este proyecto fue realizar una propuesta para la Universidad de San Buenaventura Seccional Medellín de un modelo integral de gestión que le permitiese la planeación, organización, ejecución y seguimiento de sus procesos. D...

REMINDER: Compliance with Operational Circular No. 2 (Rev. 1) on “Conditions of access to the fenced CERN site”

CERN Multimedia

2012-01-01

The purpose of Operational Circular No. 2 (Rev. 1) is to contribute to the protection of people and property by defining the conditions of access to the Organization's fenced sites. The behaviours that cannot be tolerated under any circumstances are: use of CERN access cards by people, other than the cardholders themselves, in order to gain access to facilities without having attended the required safety course; speeding, particularly on Route Gregory and Route Weisskopf; driving in and out of the site on the wrong side of the road; parking on spaces set aside for the disabled; nuisance parking, especially in the proximity of the restaurants; dumping of wrecked vehicles. As the aforementioned instances of non-compliance can lead to dangerous situations, the Organization reserves the right to apply the penalties provided for under paragraph 26 of Operational Circular No. 2 (Rev. 1), namely to refuse access to the site to people and/or their vehicles deemed to be in infringement of the circu...

ADMINISTRATIVE CIRCULARS

CERN Multimedia

Division des ressources humaines

2000-01-01

N° 2 (Rev. 1) - March 2000Guidelines and procedures concerning recruitment and probation period of staff membersN° 9 (Rev. 2) - March 2000Staff members contractsN° 16 (Rev. 2) - January 2000TrainingN° 30 (Rev. 1) - January 2000Indemnities and reimbursements upon taking up appointment and termination of contractN° 32 - February 2000Principles and procedures governing complaints of harassmentThese circular have been amended (No 2, N° 9, N° 16 and N° 30) or drawn up (N° 32).Copies are available in the Divisional Secretariats.Note:\tAdministrative and operational circulars, as well as the lists of those in force, are available for consultation in the server SRV4_Home in the Appletalk zone NOVELL (as GUEST or using your Novell username and password), volume PE Division Data Disk.The Word files are available in the folder COM, folder Public, folder ADM.CIRC.docHuman Resources DivisionTel. 74128

Algoritmo para generar formulas de características geométricas de las secciones planas, su implementación en DERIVE

Directory of Open Access Journals (Sweden)

Rolando Rivero-Galán

2010-01-01

Full Text Available En la esfera del diseño de estructuras y de elementos de maquinas, se presenta con relativa frecuencia el cálculo de determinadas características o propiedades geométricas de secciones planas, como son entre otras: el área de una sección transversal, el centro de gravedad, un momento de inercia o más general la determinación de alguna característica geométrica definida por una integral doble extendida en la región del plano que ocupa la sección, pieza o elemento.El presente trabajo tiene como objetivo la confección de un programa para computadora, utilizando el asistente matemático DERIVE, para la determinación de las características geométricas de secciones planas cuyo contorno este constituido por segmentos de rectas.In the sphere of the design of structures, is relative frequency the calculation of certain characteristic or geometric properties of plane sections, like: the area of a traverse section, the center of gravity, a moment of inertia or more general the determination of some geometric characteristic defined by a double integral extended in the region of the plane that occupies the section, piece or element.The present work has as objective the making of a program for computer, using the mathematical assistant DERIVE, for the determination of the geometric characteristics of plane sections whose contour this constituted by segments of right

Applying circular economy innovation theory in business process modeling and analysis

Science.gov (United States)

Popa, V.; Popa, L.

2017-08-01

The overall aim of this paper is to develop a new conceptual framework for business process modeling and analysis using circular economy innovative theory as a source for business knowledge management. The last part of the paper presents an author’s proposed basic structure for a new business models applying circular economy innovation theories. For people working on new innovative business models in the field of the circular economy this paper provides new ideas for clustering their concepts.

Computational simulations of hydrogen circular migration in protonated acetylene induced by circularly polarized light

Energy Technology Data Exchange (ETDEWEB)

Shi, Xuetao; Li, Wen; Schlegel, H. Bernhard, E-mail: hbs@chem.wayne.edu [Department of Chemistry, Wayne State University, Detroit, Michigan 48202 (United States)

2016-08-28

The hydrogens in protonated acetylene are very mobile and can easily migrate around the C{sub 2} core by moving between classical and non-classical structures of the cation. The lowest energy structure is the T-shaped, non-classical cation with a hydrogen bridging the two carbons. Conversion to the classical H{sub 2}CCH{sup +} ion requires only 4 kcal/mol. The effect of circularly polarized light on the migration of hydrogens in oriented C{sub 2}H{sub 3}{sup +} has been simulated by Born-Oppenheimer molecular dynamics. Classical trajectory calculations were carried out with the M062X/6-311+G(3df,2pd) level of theory using linearly and circularly polarized 32 cycle 7 μm cosine squared pulses with peak intensity of 5.6 × 10{sup 13} W/cm{sup 2} and 3.15 × 10{sup 13} W/cm{sup 2}, respectively. These linearly and circularly polarized pulses transfer similar amounts of energy and total angular momentum to C{sub 2}H{sub 3}{sup +}. The average angular momentum vectors of the three hydrogens show opposite directions of rotation for right and left circularly polarized light, but no directional preference for linearly polarized light. This difference results in an appreciable amount of angular displacement of the three hydrogens relative to the C{sub 2} core for circularly polarized light, but only an insignificant amount for linearly polarized light. Over the course of the simulation with circularly polarized light, this corresponds to a propeller-like motion of the three hydrogens around the C{sub 2} core of protonated acetylene.

Administrative circular

CERN Multimedia

2003-01-01

• N° 21 - August 2003 Special leave This circular has been amended. Copies of this circular are available in the Divisional Secretariats. In addition, administrative and operational circulars, as well as the lists of those in force, are available for consultation on the Web at: http://cern.ch/hr-div/internal/admin_services/admincirc/listadmincirc.asp Human Resources Division Tel. 74128

Administrative Circulars Rev.

CERN Multimedia

2003-01-01

Administrative Circular N° 19 (Rev. 3) - April 2003 Subsistence indemnity - Other expenses necessarily incurred in the course of duty travelAdministrative Circular N° 25 (Rev. 2) - April 2003 Shift work - Special provisions for the Fire and Rescue Service - These circulars have been revised. Human Resources Division Tel. 74128Copies of these circulars are available in the Divisional Secretariats. In addition, administrative and operational circulars, as well as the lists of those in force, are available for consultation on the Web at: http://humanresources.web.cern.ch/humanresources/internal/admin_services/admincirc/listadmincirc.asp

12 CFR 563g.2 - Offering circular requirement.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Offering circular requirement. 563g.2 Section 563g.2 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY SECURITIES OFFERINGS § 563g.2 Offering circular requirement. (a) General. No savings association shall offer or sell, directly...

Deaf-Blindness: National Organizations and Resources. Reference Circular No. 93-1.

Science.gov (United States)

Library of Congress, Washington, DC. National Library Service for the Blind and Physically Handicapped.

This circular lists national organizations and print and audiovisual resources on areas of service to persons with deaf blindness, including rehabilitation, education, information and referral, recreation, and sources for adaptive devices and products. Section I is an alphabetical list of 40 national organizations and resources, including…

Operational Circulars

CERN Multimedia

2003-01-01

Operational Circular N° 4 - April 2003 Conditions for use by members of the CERN personnel of vehicles belonging to or rented by CERN - This circular has been drawn up. Operational Circular N° 5 - October 2000 Use of CERN computing facilities - Further details on the personal use of CERN computing facilities Operational Circular N° 5 and its Subsidiary Rules http://cern.ch/ComputingRules defines the rules for the use of CERN computing facilities. One of the basic principles governing such use is that it must come within the professional duties of the user concerned, as defined by the user's divisional hierarchy. However, personal use of the computing facilities is tolerated or allowed provided : a) It is in compliance with Operational Circular N° 5 and not detrimental to official duties, including those of other users; b) the frequency and duration is limited and there is a negligible use of CERN resources; c) it does not constitute a political, commercial and/or profit-making activity; d) it is not...

Circular polarimetry of the magnetic compact binary AM Herculis

Energy Technology Data Exchange (ETDEWEB)

Piirola, V; Vilhu, O; Tuominen, I

1982-01-01

Circular polarimetry in the red and simultaneous photometric observations in the UBVRI bands during the period June 1 to 3, 1981, of AM Herculis are discussed. Peak value of negative circular polarization (- 15 %) is stronger than observed in 1976 to 1979. Variations in the shape of the polarization and light curves occur from night to night. Positive crossover and reversal of the sign of the circular polarization are only marginal. Long term changes in polarization may be partly due to precession of the axis of rotation of the white dwarf about the binary axis. However, the duration of the phase interval where circular polarization remains close to zero changes on a time scale of days, casting doubt on precession models. The changing shape and position of the accretion columns with respect to the magnetic axis could explain short term variations. (ESA)

Information Circulars

International Nuclear Information System (INIS)

1969-01-01

Information circulars are published from time to time under the symbol INFCIRC/. . . . for the purpose of bringing matters of general interest to the attention of all Members of the Agency. A list of the circulars which were of current interest on 15 January 1969 is given below, followed by an index to their subject matter. Other circulars can be traced by reference to earlier issues of the present document.

Information Circulars

Energy Technology Data Exchange (ETDEWEB)

NONE

1969-01-24

Information circulars are published from time to time under the symbol INFCIRC/. . . . for the purpose of bringing matters of general interest to the attention of all Members of the Agency. A list of the circulars which were of current interest on 15 January 1969 is given below, followed by an index to their subject matter. Other circulars can be traced by reference to earlier issues of the present document.

Administrative Circulars Nos. 12 A and B (Rev. 1) – Education Fees

CERN Multimedia

HR Department

2007-01-01

Administrative Circulars Nos. 12 A and B (Rev. 1) – "Education Fees" are now available on the intranet site of the Human Resources Department: http://cern.ch/hr-docs/admincirc/admincirc.asp These Circulars cancel and replace Administrative Circular No.12 – "Education Grant" of April 1981. Copies will shortly be available in Departmental secretariats. Administrative Circular No. 12 A is applicable to staff members (except former "local staff"), fellows and paid associates, recruited before 1st January 2007. It may be noted that, at the initiative of the Human Resources Department, a number of important simplifications have been introduced. These cover in particular lump sum payments to compensate for accommodation, meals and journey expenses. Administrative Circular No. 12 B is applicable to staff members, fellows, scientific associates recruited as of 1st January 2007, as well as to former "local staff" recruited prior to this date. If you require any additional informa...

Administrative Circulars Nos. 12 A and B (Rev. 1) – Education Fees

CERN Multimedia

HR Department

2007-01-01

Administrative Circulars Nos. 12 A and B (Rev. 1) – "Education Fees" are now available on the intranet site of the Human Resources Department: http://https://hr-docs.web.cern.ch/hr-docs/admincirc/admincirc_fr.asp These circulars cancel and replace Administrative Circular No.12 – "Education Grant" of April 1981. Copies will shortly be available in Departmental secretariats. Administrative Circular No. 12 A is applicable to staff members (except former "local staff"), fellows and paid associates, recruited before 1st January 2007. It may be noted that, at the initiative of the Human Resources Department, a number of important simplifications have been introduced. These cover, in particular, lump sum payments to compensate for accommodation, meals and journey expenses. Administrative Circular No. 12 B is applicable to staff members, fellows, scientific associates recruited as of 1st January 2007, as well as to former "local staff" recruited prior to this date. If you requi...

Circular defects detection in welded joints using circular hough transform

International Nuclear Information System (INIS)

Hafizal Yazid; Mohd Harun; Shukri Mohd; Abdul Aziz Mohamed; Shaharudin Sayuti; Muhamad Daud

2007-01-01

Conventional radiography is one of the common non-destructive testing which employs manual image interpretation. The interpretation is very subjective and depends much on the inspector experience and working conditions. It is therefore useful to have pattern recognition system in order to assist human interpreter in evaluating the quality of the radiograph sample, especially radiographic image of welded joint. This paper describes a system to detect circular discontinuities that is present in the joints. The system utilizes together 2 different algorithms, which is separability filter to identify the best object candidate and Circular Hough Transform to detect the present of circular shape. The result of the experiment shows a promising output in recognition of circular discontinuities in a radiographic image. This is based on 81.82-100% of radiography film with successful circular detection by using template movement of 10 pixels. (author)

Propuesta para el mejoramiento del clima organizacional del personal policial de la Seccional de Tránsito y Transporte del departamento de Santander, Colombia

OpenAIRE

2012-01-01

La presente propuesta estudia la situación actual del clima organizacional de la Seccional de Tránsito Transporte del departamento de Policía en Santander, hace un seguimiento especial a los indicadores de deserción, renuncias, retiros por diversas causas. El proyecto busca proponer estrategias asertivas para el mejoramiento del clima organizacional de la unidad, con el fin de ofrecer alternativas, programas y planes que al ser ejecutados permitan mejorar el clima organizacional y por lo tant...

Compressor Has No Moving Macroscopic Parts

Science.gov (United States)

Gasser, Max

1995-01-01

Compressor containing no moving macroscopic parts functions by alternating piston and valve actions of successive beds of magnetic particles. Fabricated easily because no need for precisely fitting parts rotating or sliding on each other. Also no need for lubricant fluid contaminating fluid to be compressed. Compressor operates continuously, eliminating troublesome on/off cycling of other compressors, and decreasing consumption of energy. Phased cells push fluid from bottom to top, adding increments of pressure. Each cell contains magnetic powder particles loose when electromagnet coil deenergized, but tightly packed when coil energized.

Low-Cost and High-Gain SIW Circularly Polarized Circular-Horn-Loaded Antenna for Broadband Millimeter-Wave Applications

Directory of Open Access Journals (Sweden)

Ming Du

2017-09-01

Full Text Available A wideband, low-cost and high-gain circularly polarized (CP circular-horn-loaded antenna based on substrate integrated waveguide (SIW technology operating at Ka band is presented. The proposed antenna, which is built on a single-layer substrate, consists of five parts: a short-ended SIW, a centro-symmetric wide slot, an L-shaped probe, a circular horn and a transition from SIW to air-filled rectangular waveguide for measurement. The slot is etched on the upper ground of the SIW, while the L-shaped probe for generating CP wave is printed inside the slot and connected to the SIW. A circular horn is also loaded on the surface of the SIW slot for high gain. Then, the proposed antenna with a dimension of 45×45×24.16 mm3 was fabricated and measured. The measured results show that the antenna has a wide impedance matching bandwidth of 28.6% from 30 to 40 GHz for |S11| ≤10 dB and a wide axial ratio (AR bandwidth of 22.8% from 31.5 to 39.6 GHz for AR ≤ 3 dB. The measured maximum gain is 15.6 dBi at 36 GHz with slight fluctuations over the 30–40-GHz frequency range. This kind of antenna merits low cost and easy integration with common differential circuits at the same time.

Navigation and vessel inspection circular No. 9-82 change 1. Change 1 to NVIC 9-82 of 10 May 1982, subj: MSD certification. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-10-08

This Circular revises guidance in Navigation and Vessel Inspection Circular No. 9-82, by providing for acceptance of non-Coast Guard certified sewage treatment plants on foreign flag vessels operating in waters of the United States, if the sewage treatment plants meet the requirements of Annex IV of the International Convention for the Prevention of Pollution from Ships, 1973 (MARPOL). The performance requirements for Annex IV Sewage treatment plants are in Resolution MEPC.2(VI) of the International Maritime Organization (IMO).

Circular polarization memory in single Quantum Dots

International Nuclear Information System (INIS)

Khatsevich, S.; Poem, E.; Benny, Y.; Marderfeld, I.; Gershoni, D.; Badolato, A.; Petroff, P. M.

2010-01-01

Under quasi-resonant circularly polarized optical excitation, charged quantum dots may emit polarized light. We measured various transitions with either positive, negative or no circular-polarization memory. We explain these observations and quantitatively calculate the polarization spectrum. Our model use the full configuration-interaction method, including the electron-hole exchange interaction, for calculating the quantum dot's confined many-carrier states, along with one assumption regarding the spin relaxation of photoexcited carriers: Electrons maintain their initial spin polarization, while holes do not.

Sourcewise represented green's function of the circular waveguide

International Nuclear Information System (INIS)

Prijmenko, S.D.; Bondarenko, L.A.

2007-01-01

Singular part of the Green's function of unbounded space is singled out in explicit form and contains all singularities, including a delta-shaped singularity. The problem of construction of Green's function for a field is solved, as a problem for diffraction of potential and rotational components electric field intensity of a point current source on the circular waveguide walls. The singling out of the electric field intensity singularity in an explicit form about a source enables to develop an effective algorithm of Green's function calculation at any distance between the source point and observation point in a circular waveguide

Information Circulars

Energy Technology Data Exchange (ETDEWEB)

NONE

1973-09-10

Information circulars are published from time to time under the symbol INFCIRC/.. for the purpose of bringing matters of general interest to the attention of all Members of the Agency. A subject index to the circulars is presented overleaf. It covers all those published in the last five years (that is, since the beginning of 1968 and ending with INFCIRC/192), as well as others which, for one reason or another, are still considered to be of current rather than merely historical interest. Such circulars can be traced by reference to the indexes that were included in earlier revisions of the present document.

Information Circulars

International Nuclear Information System (INIS)

1973-01-01

Information circulars are published from time to time under the symbol INFCIRC/.. for the purpose of bringing matters of general interest to the attention of all Members of the Agency. A subject index to the circulars is presented overleaf. It covers all those published in the last five years (that is, since the beginning of 1968 and ending with INFCIRC/192), as well as others which, for one reason or another, are still considered to be of current rather than merely historical interest. Such circulars can be traced by reference to the indexes that were included in earlier revisions of the present document.

Administrative circular n°23 (Rev. 3) – Special working hours

CERN Multimedia

2013-01-01

Administrative Circular No. 23 (Rev. 3) entitled “Special working hours”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 11 October 2012 and entering into force on 1 January 2013, is available on the intranet site of the Human Resources Department.   This circular is applicable to staff members and fellows. It cancels and replaces Administrative Circular No. 23 (Rev. 2) entitled “Special working hours” of December 2008. Paragraph 6 a) of Annex II of this circular was revised following the modification of Article III 1.04 of the Staff Regulations approved by Council on 14 December 2012. The modification serves to adapt the minimum rest time to the fact that, in case of rapidly alternating shifts, a maximum of seven consecutive shifts may be performed. Department Head Office HR Department

A novel x-ray circularly polarized ranging method

Science.gov (United States)

Song, Shi-Bin; Xu, Lu-Ping; Zhang, Hua; Gao, Na; Shen, Yang-He

2015-05-01

Range measurement has found multiple applications in deep space missions. With more and further deep space exploration activities happening now and in the future, the requirement for range measurement has risen. In view of the future ranging requirement, a novel x-ray polarized ranging method based on the circular polarization modulation is proposed, termed as x-ray circularly polarized ranging (XCPolR). XCPolR utilizes the circular polarization modulation to process x-ray signals and the ranging information is conveyed by the circular polarization states. As the circular polarization states present good stability in space propagation and x-ray detectors have light weight and low power consumption, XCPolR shows great potential in the long-distance range measurement and provides an option for future deep space ranging. In this paper, we present a detailed illustration of XCPolR. Firstly, the structure of the polarized ranging system is described and the signal models in the ranging process are established mathematically. Then, the main factors that affect the ranging accuracy, including the Doppler effect, the differential demodulation, and the correlation error, are analyzed theoretically. Finally, numerical simulation is carried out to evaluate the performance of XCPolR. Projects supported by the National Natural Science Foundation of China (Grant Nos. 61172138 and 61401340), the Natural Science Basic Research Plan in Shaanxi Province of China (Grant No. 2013JQ8040), the Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20130203120004), the Open Research Fund of the Academy of Satellite Application, China (Grant No. 2014 CXJJ-DH 12), the Xi’an Science and Technology Plan, China (Grant No. CXY1350(4)), the Fundamental Research Funds for the Central Universities, China (Grant Nos. 201413B, 201412B, and JB141303), and the Open Fund of Key Laboratory of Precision Navigation and Timing Technology, National Time Service Center, Chinese

METHOD OF CONJUGATED CIRCULAR ARCS TRACING

Directory of Open Access Journals (Sweden)

N. Ageyev Vladimir

2017-01-01

Full Text Available The geometric properties of conjugated circular arcs connecting two points on the plane with set directions of tan- gent vectors are studied in the work. It is shown that pairs of conjugated circular arcs with the same conditions in frontier points create one-parameter set of smooth curves tightly filling all the plane. One of the basic properties of this set is the fact that all coupling points of circular arcs are on the circular curve going through the initially given points. The circle radius depends on the direction of tangent vectors. Any point of the circle curve, named auxiliary in this work, determines a pair of conjugated arcs with given boundary conditions. One more condition of the auxiliary circle curve is that it divides the plane into two parts. The arcs going from the initial point are out of the circle limited by this circle curve and the arcs coming to the final point are inside it. These properties are the basis for the method of conjugated circular arcs tracing pro- posed in this article. The algorithm is rather simple and allows to fulfill all the needed plottings using only the divider and ruler. Two concrete examples are considered. The first one is related to the problem of tracing of a pair of conjugated arcs with the minimal curve jump when going through the coupling point. The second one demonstrates the possibility of trac- ing of the smooth curve going through any three points on the plane under condition that in the initial and final points the directions of tangent vectors are given. The proposed methods of conjugated circular arcs tracing can be applied in solving of a wide variety of problems connected with the tracing of cam contours, for example pattern curves in textile industry or in computer-aided-design systems when programming of looms with numeric control.

Circular economy and nuclear energy

International Nuclear Information System (INIS)

2017-01-01

This article first recalls what circular economy is, and its main principles (sustainable supply, eco-design, industrial and territorial ecology, economy of function rather than of possession, extension of product lifetime, recycling). It outlines its different benefits: improved resilience, inclusion of all actors of the territory, creation of local jobs, a global vision. In the next part, the nuclear industry is presented as a pioneer in this respect through various trends and developments: closure of the fuel cycle and saving of uranium and energy in the upstream part, reduction of wastes in the downstream part, exploitation of plants on a longer term, management of the production of conventional wastes, reduction of energy consumption, evolution of the doctrine in terms of management of very low level radioactive wastes

System for circular and complex tomography

International Nuclear Information System (INIS)

Hellstrom, M.J.

1979-01-01

This invention discloses a system for conducting circular as well as complex tomographic procedures utilizing apparatus which has no mechanical linkage between the X-ray source and the X-ray receptor. The path of travel of the X-ray source both circularly and linearly is sensed by electromagnetic radiation and more particularly by light radiation which is generated by a laser. The linear travel is sensed by means of reflected laser radiation directed to the X-ray source and fed to an interferometer. The circular travel, on the other hand, is sensed by means of a laser gyroscope also receiving light radiation from a laser. Optical energy sensing means is thus used to generate command signals which are coupled to respective drive motors which act to rotate and when desirable, translate the X-ray receptor so that its motion follows the motion, both orbital and linear, of the X-ray source for performing any desired type of tomographic procedure

Guide to Spoken-Word Recordings: Popular Literature. Reference Circular No. 95-01.

Science.gov (United States)

Library of Congress, Washington, DC. National Library Service for the Blind and Physically Handicapped.

This reference circular contains selected sources for the purchase, rental, or loan of fiction and nonfiction spoken-word recordings. The sources in sections 1, 2, and 3 are commercial and, unless otherwise noted, offer abridged and unabridged titles on audio cassette. Sources in section 1 make available popular fiction; classics; poetry; drama;…

Information Circulars

International Nuclear Information System (INIS)

1965-01-01

Information circulars are published from time to time under the symbol INFCIRC/. for the purpose of bringing matters of general interest to the attention of all Members of the Agency. A list of the circulars that were current on 31 December 1964 is given, followed by an index to their subject matter.

Information circulars

International Nuclear Information System (INIS)

1992-08-01

The document summarizes the Information Circulars published by the IAEA for the purpose of bringing matters of general interest to the attention of all Members of the Agency. This revision contains INFCIRCs published up to mid-August 1992. A complete numerical lift of Information Circulars with their titles is reproduced in an Annex

Information Circulars

Energy Technology Data Exchange (ETDEWEB)

NONE

1965-01-18

Information circulars are published from time to time under the symbol INFCIRC/. for the purpose of bringing matters of general interest to the attention of all Members of the Agency. A list of the circulars that were current on 31 December 1964 is given, followed by an index to their subject matter.

21 CFR Appendix A to Part 1403 - OMB Circular A-128, “Audits of State and Local Governments”

Science.gov (United States)

2010-04-01

.... Supersession. The Circular supersedes Attachment P, “Audit Requirements,” of Circular A-102, “Uniform... borough, municipality, city, town, township, parish, local public authority, special district, school.... Major Federal Assistance Program, as defined by Pub. L. 98-502, is described in the Attachment to this...

Information circulars

International Nuclear Information System (INIS)

1997-02-01

The document summarizes the Information Circulars published by the IAEA for the purpose of bringing matters of general interest to the attention of all Member States. This revision contains INFCIRCs published up to February 1997, grouped by field of activity. A complete list of information circulars in numerical order is given in an annex

Information circulars

International Nuclear Information System (INIS)

1994-08-01

Information circulars are published from time to time under the symbol INFCIRC/... for the purpose of bringing matters of general interest to the attention of all Members of the Agency. The present revision contains INFCIRCs published up to mid-August 1994. A complete numerical list of information circulars is reproduced with their titles in the Annex

Information circulars

International Nuclear Information System (INIS)

2002-05-01

Information circulars are published from time to time under the symbol INFCIRC/... for the purpose of bringing matters of general interest to the attention of all Members of the Agency. The present revision contains INFCIRCs published up to the end of April 2002. A complete numerical list of information circulars is reproduced with their titles in the Annex

Information circulars

International Nuclear Information System (INIS)

1999-06-01

The document summarizes the Information Circulars published by the IAEA for the purpose of bringing matters of general interest to the attention of all Member States. This revision contains INFCIRCs published up to the end of May 1999, grouped by field of activity. A complete list of information circulars in numerical order is given in an annex

Information Circulars

International Nuclear Information System (INIS)

1966-01-01

Information circulars are published from time to time under the symbol INFCIRC/. . . . for the purpose of bringing matters of general interest to the attention of all Members of the Agency. A list of the circulars that were current or on the press on 15 May 1966 is given, followed by an index to their subject matter.

Information Circulars

Energy Technology Data Exchange (ETDEWEB)

NONE

1966-06-10

Information circulars are published from time to time under the symbol INFCIRC/. . . . for the purpose of bringing matters of general interest to the attention of all Members of the Agency. A list of the circulars that were current or on the press on 15 May 1966 is given, followed by an index to their subject matter.

Transposable elements and circular DNAs

KAUST Repository

Mourier, Tobias

2016-09-26

Circular DNAs are extra-chromosomal fragments that become circularized by genomic recombination events. We have recently shown that yeast LTR elements generate circular DNAs through recombination events between their flanking long terminal repeats (LTRs). Similarly, circular DNAs can be generated by recombination between LTRs residing at different genomic loci, in which case the circular DNA will contain the intervening sequence. In yeast, this can result in gene copy number variations when circles contain genes and origins of replication. Here, I speculate on the potential and implications of circular DNAs generated through recombination between human transposable elements.

Transposable elements and circular DNAs

KAUST Repository

Mourier, Tobias

2016-01-01

Circular DNAs are extra-chromosomal fragments that become circularized by genomic recombination events. We have recently shown that yeast LTR elements generate circular DNAs through recombination events between their flanking long terminal repeats (LTRs). Similarly, circular DNAs can be generated by recombination between LTRs residing at different genomic loci, in which case the circular DNA will contain the intervening sequence. In yeast, this can result in gene copy number variations when circles contain genes and origins of replication. Here, I speculate on the potential and implications of circular DNAs generated through recombination between human transposable elements.

Finding the right incentives; circular business models for the construction industry

NARCIS (Netherlands)

van den Brink, R.; Prins, M.; Straub, A.; Ploeger, H.D.

2017-01-01

After its launch, the circular economy gained popularity all over the world as the new sustainability paradigm. Despite its popularity there is little to no material to be found on the implementation of the circular economy in the construction industry. Through a mixed method methodology using

Designing the Business Models for Circular Economy—Towards the Conceptual Framework

Directory of Open Access Journals (Sweden)

Mateusz Lewandowski

2016-01-01

Full Text Available Switching from the current linear model of economy to a circular one has recently attracted increased attention from major global companies e.g., Google, Unilever, Renault, and policymakers attending the World Economic Forum. The reasons for this are the huge financial, social and environmental benefits. However, the global shift from one model of economy to another also concerns smaller companies on a micro-level. Thus, comprehensive knowledge on designing circular business models is needed to stimulate and foster implementation of the circular economy. Existing business models for the circular economy have limited transferability and there is no comprehensive framework supporting every kind of company in designing a circular business model. This study employs a literature review to identify and classify the circular economy characteristics according to a business model structure. The investigation in the eight sub-domains of research on circular business models was used to redefine the components of the business model canvas in the context of the circular economy. Two new components—the take-back system and adoption factors—have been identified, thereby leading to the conceptualization of an extended framework for the circular business model canvas. Additionally, the triple fit challenge has been recognized as an enabler of the transition towards a circular business model. Some directions for further research have been outlined, as well.

A systematic review on drivers, barriers, and practices towards circular economy

DEFF Research Database (Denmark)

Govindan, Kannan; Hasanagic, Mia

2018-01-01

identified that emerge from the application of a circular economy, no concrete studies exist that investigate current state-of-the-art drivers, barriers and practices in this relevant field. An in-depth exploration of current practices would enhance the circular economy’s significance and would help...... understand its present level of implementation. With this concern, this study provides an analysis of the drivers, barriers and practices that influence the implementation of the circular economy in the context of supply chains through a systematic review. In order to analyse the circular economy’s level...... of implementation, we correlate stakeholders’ perspectives with drivers, barriers, and practices; thus, a multi-perspective framework is proposed. From the results, it is evident that among various stakeholders, the governmental perspective has the maximum positive impact on the implementation of the circular...

Administrative circulars No. 22A (rev. 1) – Award of additional periods of membership in the Pensions Fund for long-term shift work and No. 22B (rev. 1) – Compensation for long-term shift work hours

CERN Multimedia

HR Department

2011-01-01

Administrative Circulars No. 22A (Rev. 1) entitled "Award of additional periods of membership in the Pension Fund for long-term shift work" and No. 22B (Rev.1) entitled “Compensation for long-term shift work hours”, adopted following discussion in the Standing Concertation Committee meeting of 21 September 2010 and entering into force on 1 March 2011, are available on the intranet site of the Human Resources Department: http://cern.ch/hr-docs/admincirc/admincirc.asp They cancel and replace Administrative Circulars No. 22A and 22B entitled "Award of additional periods of membership in the Pension Fund to shift workers (Early Departure)” and “Duration and special compensation for shift work” of January 2000. This new version clarifies, in particular, the compensation of effective long-term shift work hours. Department Head Office  

Information circulars

International Nuclear Information System (INIS)

1987-06-01

The document summarizes the information circulars published by the IAEA for the purpose of bringing matters of general interest to the attention of all Members of the Agency. In the main body of the document only those documents which are regarded as likely to be of current interest are listed. A complete numerical list of information circulars with their titles is reproduced in the Annex

Efectos del sistema de pedaleo no circular Q-Ring sobre el rendimiento en el sprint de la disciplina ciclista BMX

Directory of Open Access Journals (Sweden)

M. Mateo

2010-12-01

Full Text Available

El objetivo de este estudio ha sido evaluar los efectos de un sistema de plato no circular de desarrollo variable Q-Ring (Q frente a uno convencional (NQ sobre el rendimiento en el sprint ciclista de Bicicleta de Moto Cross (BMX. Catorce deportistas pertenecientes a la Selección Nacional Española han realizado un test de sprint, desde la rampa de salida, en una pista de BMX (3.95 s de duración; orden randomizado y contrabalanceado. El análisis de contraste prueba T para muestras relacionadas no muestra diferencias estadísticamente significativas para las variables Velocidad media (Vmedia y Tiempo en 31m (T31m entre Q y NQ cuando considera al grupo en su conjunto. Sin embargo, al dividir la muestra entre deportistas Expertos y Noveles, encontramos diferencias a favor de Q respecto de NQ entre los Expertos (Vmedia: 5.91±0.03 vs 5.81±0.05 m/s; T31m: 3.21±0.02 vs 3.23±0.02 s; P < 0.05, diferencias que se traducen hasta en 40 cm de ganancia en los 3.95 primeros segundos de carrera. Estos resultados sugieren que el sistema Q mejora el rendimiento en el sprint de la especialidad ciclista BMX siempre que el deportista posea la capacidad de mover adecuadamente su desarrollo.
Palabras clave: Eficiencia mecánica, plato no circular, pedaleo, rendimiento, sprint, BMX

Bright circularly polarized soft X-ray high harmonics for X-ray magnetic circular dichroism.

Science.gov (United States)

Fan, Tingting; Grychtol, Patrik; Knut, Ronny; Hernández-García, Carlos; Hickstein, Daniel D; Zusin, Dmitriy; Gentry, Christian; Dollar, Franklin J; Mancuso, Christopher A; Hogle, Craig W; Kfir, Ofer; Legut, Dominik; Carva, Karel; Ellis, Jennifer L; Dorney, Kevin M; Chen, Cong; Shpyrko, Oleg G; Fullerton, Eric E; Cohen, Oren; Oppeneer, Peter M; Milošević, Dejan B; Becker, Andreas; Jaroń-Becker, Agnieszka A; Popmintchev, Tenio; Murnane, Margaret M; Kapteyn, Henry C

2015-11-17

We demonstrate, to our knowledge, the first bright circularly polarized high-harmonic beams in the soft X-ray region of the electromagnetic spectrum, and use them to implement X-ray magnetic circular dichroism measurements in a tabletop-scale setup. Using counterrotating circularly polarized laser fields at 1.3 and 0.79 µm, we generate circularly polarized harmonics with photon energies exceeding 160 eV. The harmonic spectra emerge as a sequence of closely spaced pairs of left and right circularly polarized peaks, with energies determined by conservation of energy and spin angular momentum. We explain the single-atom and macroscopic physics by identifying the dominant electron quantum trajectories and optimal phase-matching conditions. The first advanced phase-matched propagation simulations for circularly polarized harmonics reveal the influence of the finite phase-matching temporal window on the spectrum, as well as the unique polarization-shaped attosecond pulse train. Finally, we use, to our knowledge, the first tabletop X-ray magnetic circular dichroism measurements at the N4,5 absorption edges of Gd to validate the high degree of circularity, brightness, and stability of this light source. These results demonstrate the feasibility of manipulating the polarization, spectrum, and temporal shape of high harmonics in the soft X-ray region by manipulating the driving laser waveform.

Light-induced circular birefringence in cyanoazobenzene side-chain liquid-crystalline polyester films

DEFF Research Database (Denmark)

Naydenova, I; Nikolova, L; Ramanujam, P.S.

1999-01-01

We report the inducement of large circular birefringence (optical activity) in films of a cyanoazobenzene side-chain liquid-crystalline polyester on illumination with circularly polarized light. The polyester has no chiral groups and is initially isotropic. The induced optical rotation is up to 5...

A new derivation of the conformally flat stationary cyclic non-circular spacetimes

International Nuclear Information System (INIS)

Ayon-Beato, Eloy; Campuzano, Cuauhtemoc; GarcIa, Alberto

2007-01-01

We present an alternative way to derive the conformally flat stationary cyclic non-circular spacetimes. We show that there is no room for stationary axisymmetric non-circular axisymmetric spacetimes. We reproduce the well know results for this sort of spacetimes recently reported in [1

A new derivation of the conformally flat stationary cyclic non-circular spacetimes

Energy Technology Data Exchange (ETDEWEB)

Ayon-Beato, Eloy [Departamento de Fisica, Facultad de Fisica e Inteligencia Artificial, Universidad Veracruzana, 91000 Xalapa, Veracruz (Mexico); Campuzano, Cuauhtemoc [Departamento de Fisica, Facultad de Fisica e Inteligencia Artificial, Universidad Veracruzana, 91000 Xalapa, Veracruz (Mexico); GarcIa, Alberto [Department of Physics, University of California, Davis, CA 95616 (United States)

2007-11-15

We present an alternative way to derive the conformally flat stationary cyclic non-circular spacetimes. We show that there is no room for stationary axisymmetric non-circular axisymmetric spacetimes. We reproduce the well know results for this sort of spacetimes recently reported in [1].

Dimensionamiento en rotura a flexión de secciones de hormigón armado. Un planteamiento compacto

Directory of Open Access Journals (Sweden)

Gil-Martín, L. M.

2012-12-01

Full Text Available This paper is an overview of the traditional method of strength design of reinforced concrete sections. The procedure, presented in the current textbooks, dates from the 50's of XX century and it can be simplified. In this work the approach is reformulated and presented in a more compact way, which implies a change both from the educational point of view and from the professional point of view of reinforced concrete. Theorem of Optimal Reinforcement of RC Sections confirms that the ingenious solutions proposed by Whitney and Wuczkowsky correspond to the minimum of a general problem that can be developed more rationally. Presenting the problem in compact form, using diagrams RSD allowed to choose alternative solutions of reinforcement with reduced environmental impact.

Este artículo es una revisión general del procedimiento tradicional de dimensionamiento en rotura de secciones de hormigón armado. El procedimiento que recogen la mayor parte de los libros de texto actuales data de los años 50 del siglo XX y es susceptible de ser simplificado. En este artículo el planteamiento se reformula y se presenta de una manera más compacta, lo que supone un cambio tanto desde el punto de vista docente como desde el punto de vista profesional del hormigón armado. El Teorema de Armado a Flexión confirma que las ingeniosas soluciones propuestas por Whitney o Wuczkowsky, corresponden a los mínimos de un problema general que puede ser planteado de una forma más racional. El hecho de presentar el problema de forma compacta, empleando los diagramas RSD permite poder elegir soluciones alternativas de armado de menor impacto medioambiental.

Behaviour of FRP confined concrete in square columns

Directory of Open Access Journals (Sweden)

de Diego, A.

2015-12-01

efecto de confinamiento en secciones no circulares.

Collection of ministerial circulars on the transport of radioactive substances

International Nuclear Information System (INIS)

1977-10-01

This publication by the CNEN reproduces the full texts of Ministerial Circulars on the transport by road, rail, air and sea of radioactive substances, made in implementation of Act No. 1860 on the peaceful uses of nuclear energy of 1962, as amended by Decree No. 1704 of 1965, laying down that regulatory standards should be elaborated for such transport in accordance with the Euratom basic radiation protection standards and the IAEA Regulations on the Safe Transport of Radioactive Materials. These Circulars are set out in chronological order with reference to the national and international provisions under which they were made. (NEA) [fr

Beam Dynamics and Beam Losses - Circular Machines

CERN Document Server

Kain, V

2016-01-01

A basic introduction to transverse and longitudinal beam dynamics as well as the most relevant beam loss mechanisms in circular machines will be presented in this lecture. This lecture is intended for physicists and engineers with little or no knowledge of this subject.

Performance limits of ion extraction systems with non-circular apertures

Energy Technology Data Exchange (ETDEWEB)

Shagayda, A., E-mail: shagayda@gmail.com; Madeev, S. [Keldysh Research Centre, Onezhskaya, 8, 125438 Moscow (Russian Federation)

2016-04-15

A three-dimensional computer simulation is used to determine the perveance limitations of ion extraction systems with non-circular apertures. The objective of the study is to analyze the possibilities to improve mechanical strength of the ion optics made of carbon-carbon composite materials. Non-circular grid apertures are better suited to the physical structure of carbon-carbon composite materials, than conventionally used circular holes in a hexagonal pattern, because they allow a fewer number of cut fibers. However, the slit-type accelerating systems, usually regarded as the main alternative to the conventional ion optics, have an intolerably narrow range of operating perveance values at which there is no direct ion impingement on the acceleration grid. This paper presents results of comparative analysis of a number of different ion optical systems with non-circular apertures and conventional ion optical systems with circular apertures. It has been revealed that a relatively wide perveance range without direct ion impingement may be obtained with apertures shaped as a square with rounded corners. Numerical simulations show that this geometry may have equivalent perveance range as the traditional geometry with circular apertures while being more mechanically robust. In addition, such important characteristics, as the effective transparency for both the ions and the neutral atoms, the height of the potential barrier reflecting the downstream plasma electrons and the angular divergence of the beamlet also can be very close to these parameters for the optics with circular apertures.

Performance limits of ion extraction systems with non-circular apertures.

Science.gov (United States)

Shagayda, A; Madeev, S

2016-04-01

A three-dimensional computer simulation is used to determine the perveance limitations of ion extraction systems with non-circular apertures. The objective of the study is to analyze the possibilities to improve mechanical strength of the ion optics made of carbon-carbon composite materials. Non-circular grid apertures are better suited to the physical structure of carbon-carbon composite materials, than conventionally used circular holes in a hexagonal pattern, because they allow a fewer number of cut fibers. However, the slit-type accelerating systems, usually regarded as the main alternative to the conventional ion optics, have an intolerably narrow range of operating perveance values at which there is no direct ion impingement on the acceleration grid. This paper presents results of comparative analysis of a number of different ion optical systems with non-circular apertures and conventional ion optical systems with circular apertures. It has been revealed that a relatively wide perveance range without direct ion impingement may be obtained with apertures shaped as a square with rounded corners. Numerical simulations show that this geometry may have equivalent perveance range as the traditional geometry with circular apertures while being more mechanically robust. In addition, such important characteristics, as the effective transparency for both the ions and the neutral atoms, the height of the potential barrier reflecting the downstream plasma electrons and the angular divergence of the beamlet also can be very close to these parameters for the optics with circular apertures.

Performance limits of ion extraction systems with non-circular apertures

Science.gov (United States)

Shagayda, A.; Madeev, S.

2016-04-01

A three-dimensional computer simulation is used to determine the perveance limitations of ion extraction systems with non-circular apertures. The objective of the study is to analyze the possibilities to improve mechanical strength of the ion optics made of carbon-carbon composite materials. Non-circular grid apertures are better suited to the physical structure of carbon-carbon composite materials, than conventionally used circular holes in a hexagonal pattern, because they allow a fewer number of cut fibers. However, the slit-type accelerating systems, usually regarded as the main alternative to the conventional ion optics, have an intolerably narrow range of operating perveance values at which there is no direct ion impingement on the acceleration grid. This paper presents results of comparative analysis of a number of different ion optical systems with non-circular apertures and conventional ion optical systems with circular apertures. It has been revealed that a relatively wide perveance range without direct ion impingement may be obtained with apertures shaped as a square with rounded corners. Numerical simulations show that this geometry may have equivalent perveance range as the traditional geometry with circular apertures while being more mechanically robust. In addition, such important characteristics, as the effective transparency for both the ions and the neutral atoms, the height of the potential barrier reflecting the downstream plasma electrons and the angular divergence of the beamlet also can be very close to these parameters for the optics with circular apertures.

Performance limits of ion extraction systems with non-circular apertures

International Nuclear Information System (INIS)

Shagayda, A.; Madeev, S.

2016-01-01

A three-dimensional computer simulation is used to determine the perveance limitations of ion extraction systems with non-circular apertures. The objective of the study is to analyze the possibilities to improve mechanical strength of the ion optics made of carbon-carbon composite materials. Non-circular grid apertures are better suited to the physical structure of carbon-carbon composite materials, than conventionally used circular holes in a hexagonal pattern, because they allow a fewer number of cut fibers. However, the slit-type accelerating systems, usually regarded as the main alternative to the conventional ion optics, have an intolerably narrow range of operating perveance values at which there is no direct ion impingement on the acceleration grid. This paper presents results of comparative analysis of a number of different ion optical systems with non-circular apertures and conventional ion optical systems with circular apertures. It has been revealed that a relatively wide perveance range without direct ion impingement may be obtained with apertures shaped as a square with rounded corners. Numerical simulations show that this geometry may have equivalent perveance range as the traditional geometry with circular apertures while being more mechanically robust. In addition, such important characteristics, as the effective transparency for both the ions and the neutral atoms, the height of the potential barrier reflecting the downstream plasma electrons and the angular divergence of the beamlet also can be very close to these parameters for the optics with circular apertures.

the mathematics of ghanaian circular musical drumheads

African Journals Online (AJOL)

User

overtones. INTRODUCTION. The mathematics of percussion drums and other musical instruments has been delved into by lots of researchers tackling it from different angles, and especially for circular drumheads with constant tension. Such drums include the conga which usually produces rhythmic sounds. But little or no ...

A New Limit on CMB Circular Polarization from SPIDER

Science.gov (United States)

Nagy, J. M.; Ade, P. A. R.; Amiri, M.; Benton, S. J.; Bergman, A. S.; Bihary, R.; Bock, J. J.; Bond, J. R.; Bryan, S. A.; Chiang, H. C.; Contaldi, C. R.; Doré, O.; Duivenvoorden, A. J.; Eriksen, H. K.; Farhang, M.; Filippini, J. P.; Fissel, L. M.; Fraisse, A. A.; Freese, K.; Galloway, M.; Gambrel, A. E.; Gandilo, N. N.; Ganga, K.; Gudmundsson, J. E.; Halpern, M.; Hartley, J.; Hasselfield, M.; Hilton, G.; Holmes, W.; Hristov, V. V.; Huang, Z.; Irwin, K. D.; Jones, W. C.; Kuo, C. L.; Kermish, Z. D.; Li, S.; Mason, P. V.; Megerian, K.; Moncelsi, L.; Morford, T. A.; Netterfield, C. B.; Nolta, M.; Padilla, I. L.; Racine, B.; Rahlin, A. S.; Reintsema, C.; Ruhl, J. E.; Runyan, M. C.; Ruud, T. M.; Shariff, J. A.; Soler, J. D.; Song, X.; Trangsrud, A.; Tucker, C.; Tucker, R. S.; Turner, A. D.; Van Der List, J. F.; Weber, A. C.; Wehus, I. K.; Wiebe, D. V.; Young, E. Y.

2017-08-01

We present a new upper limit on cosmic microwave background (CMB) circular polarization from the 2015 flight of Spider, a balloon-borne telescope designed to search for B-mode linear polarization from cosmic inflation. Although the level of circular polarization in the CMB is predicted to be very small, experimental limits provide a valuable test of the underlying models. By exploiting the nonzero circular-to-linear polarization coupling of the half-wave plate polarization modulators, data from Spider's 2015 Antarctic flight provide a constraint on Stokes V at 95 and 150 GHz in the range 33< {\\ell }< 307. No other limits exist over this full range of angular scales, and Spider improves on the previous limit by several orders of magnitude, providing 95% C.L. constraints on {\\ell }({\\ell }+1){C}{\\ell }{VV}/(2π ) ranging from 141 to 255 μK2 at 150 GHz for a thermal CMB spectrum. As linear CMB polarization experiments become increasingly sensitive, the techniques described in this paper can be applied to obtain even stronger constraints on circular polarization.

A New Limit on CMB Circular Polarization from SPIDER

Energy Technology Data Exchange (ETDEWEB)

Nagy, J. M.; Ade, P. A. R.; Amiri, M.; Benton, S. J.; Bergman, A. S.; Bihary, R.; Bock, J. J.; Bond, J. R.; Bryan, S. A.; Chiang, H. C.; Contaldi, C. R.; Doré, O.; Duivenvoorden, A. J.; Eriksen, H. K.; Farhang, M.; Filippini, J. P.; Fissel, L. M.; Fraisse, A. A.; Freese, K.; Galloway, M.; Gambrel, A. E.; Gandilo, N. N.; Ganga, K.; Gudmundsson, J. E.; Halpern, M.; Hartley, J.; Hasselfield, M.; Hilton, G.; Holmes, W.; Hristov, V. V.; Huang, Z.; Irwin, K. D.; Jones, W. C.; Kuo, C. L.; Kermish, Z. D.; Li, S.; Mason, P. V.; Megerian, K.; Moncelsi, L.; Morford, T. A.; Netterfield, C. B.; Nolta, M.; Padilla, I. L.; Racine, B.; Rahlin, A. S.; Reintsema, C.; Ruhl, J. E.; Runyan, M. C.; Ruud, T. M.; Shariff, J. A.; Soler, J. D.; Song, X.; Trangsrud, A.; Tucker, C.; Tucker, R. S.; Turner, A. D.; List, J. F. Van Der; Weber, A. C.; Wehus, I. K.; Wiebe, D. V.; Young, E. Y.

2017-08-01

We present a new upper limit on CMB circular polarization from the 2015 flight of SPIDER, a balloon-borne telescope designed to search for $B$-mode linear polarization from cosmic inflation. Although the level of circular polarization in the CMB is predicted to be very small, experimental limits provide a valuable test of the underlying models. By exploiting the non-zero circular-to-linear polarization coupling of the HWP polarization modulators, data from SPIDER's 2015 Antarctic flight provides a constraint on Stokes $V$ at 95 and 150 GHz from $33<\\ell<307$. No other limits exist over this full range of angular scales, and SPIDER improves upon the previous limit by several orders of magnitude, providing 95% C.L. constraints on $\\ell (\\ell+1)C_{\\ell}^{VV}/(2\\pi)$ ranging from 141 $\\mu K ^2$ to 203 $\\mu K ^2$ at 150 GHz for a thermal CMB spectrum. As linear CMB polarization experiments become increasingly sensitive, the techniques described in this paper can be applied to obtain stronger constraints on circular polarization.

Circular states of atomic hydrogen

International Nuclear Information System (INIS)

Lutwak, R.; Holley, J.; Chang, P.P.; Paine, S.; Kleppner, D.; Ducas, T.

1997-01-01

We describe the creation of circular states of hydrogen by adiabatic transfer of a Rydberg state in crossed electric and magnetic fields, and also by adiabatic passage in a rotating microwave field. The latter method permits rapid switching between the two circular states of a given n manifold. The two methods are demonstrated experimentally, and results are presented of an analysis of the field ionization properties of the circular states. An application for the circular states is illustrated by millimeter-wave resonance in hydrogen of the n=29→n=30 transition. copyright 1997 The American Physical Society

Somatic DNA recombination yielding circular DNA and deletion of a genomic region in embryonic brain

International Nuclear Information System (INIS)

Maeda, Toyoki; Chijiiwa, Yoshiharu; Tsuji, Hideo; Sakoda, Saburo; Tani, Kenzaburo; Suzuki, Tomokazu

2004-01-01

In this study, a mouse genomic region is identified that undergoes DNA rearrangement and yields circular DNA in brain during embryogenesis. External region-directed inverse polymerase chain reaction on circular DNA extracted from late embryonic brain tissue repeatedly detected DNA of this region containing recombination joints. Wide-range genomic PCR and digestion-circularization PCR analysis showed this region underwent recombination accompanied with deletion of intervening sequences, including the circularized regions. This region was mapped by fluorescence in situ hybridization to C1 on mouse chromosome 16, where no gene and no physiological DNA rearrangement had been identified. DNA sequence in the region has segmental homology to an orthologous region on human chromosome 3q.13. These observations demonstrated somatic DNA recombination yielding genomic deletions in brain during embryogenesis

Case Report: Use of a circular stapler for Billroth I anastomosis after ...

African Journals Online (AJOL)

After separating the stomach from the duodenum, we anastomosed the posterior wall of the stomach to the duodenum by introducing the circular stapler through the part of the stomach that was to be resected. Then we separated the distal part of the stomach with a linear stapler, and so completed the distal gastric resection.

Thin circular cylinder under axisymmetrical thermal and mechanical loading

International Nuclear Information System (INIS)

Arnaudeau, F.; Zarka, J.; Gerij, J.

1977-01-01

To assess structural integrity of components subjected to cyclic thermal loadings one must look at thermal ratchetting as a possible failure mode. Considering a thin circular cylinder subjected to constant internal pressure and cyclically varying thermal gradient through the thickness Bree, J. Strain Analysis 2 (1967) No.3, obtained a diagram that serves as a foundation for many design rules (e.g.: ASME code). The upper part of the french LMFBR main vessel is subjected to an axisymmetrical axial thermal loading and an axial load (own weight). Operation of the reactor leads to cyclic variations of the axial thermal loading. The question that arises is whether or not the Bree diagram is realistic for such loading conditions. A special purpose computer code (Ratch) was developed to analyse a thin circular cylinder subjected to axisymmetrical mechanical and thermal loadings. The Mendelson's approach of this problem is followed. Classical Kirchoff-Love hypothesis of thin shells is used and a state of plane stress is assumed. Space integrations are performed by Gaussian quadrature in the axial direction and by Simpson's one third rule throughout the thickness. Thermoelastic-plastic constitutive equations are solved with an implicit scheme (Nguyen). Thermovisco-plastic constitutive equations are solved with an explicit time integration scheme (Treanor's algorithm especially fitted). A Bree type diagram is obtained for an axial step of temperature which varies cyclically and a sustained constant axial load. The material behavior is assumed perfectly plastic and creep effect is not considered. Results show that the domain where no ratchetting occurs is reduced when compared with the domain predicted by the Bree diagram

Two-craft Coulomb formation study about circular orbits and libration points

Science.gov (United States)

Inampudi, Ravi Kishore

This dissertation investigates the dynamics and control of a two-craft Coulomb formation in circular orbits and at libration points; it addresses relative equilibria, stability and optimal reconfigurations of such formations. The relative equilibria of a two-craft tether formation connected by line-of-sight elastic forces moving in circular orbits and at libration points are investigated. In circular Earth orbits and Earth-Moon libration points, the radial, along-track, and orbit normal great circle equilibria conditions are found. An example of modeling the tether force using Coulomb force is discussed. Furthermore, the non-great-circle equilibria conditions for a two-spacecraft tether structure in circular Earth orbit and at collinear libration points are developed. Then the linearized dynamics and stability analysis of a 2-craft Coulomb formation at Earth-Moon libration points are studied. For orbit-radial equilibrium, Coulomb forces control the relative distance between the two satellites. The gravity gradient torques on the formation due to the two planets help stabilize the formation. Similar analysis is performed for along-track and orbit-normal relative equilibrium configurations. Where necessary, the craft use a hybrid thrusting-electrostatic actuation system. The two-craft dynamics at the libration points provide a general framework with circular Earth orbit dynamics forming a special case. In the presence of differential solar drag perturbations, a Lyapunov feedback controller is designed to stabilize a radial equilibrium, two-craft Coulomb formation at collinear libration points. The second part of the thesis investigates optimal reconfigurations of two-craft Coulomb formations in circular Earth orbits by applying nonlinear optimal control techniques. The objective of these reconfigurations is to maneuver the two-craft formation between two charged equilibria configurations. The reconfiguration of spacecraft is posed as an optimization problem using the

Solid Angle Computations for a Circular Radiator and a Circular Detector

Energy Technology Data Exchange (ETDEWEB)

Konijn, J; Tollander, B

1963-02-15

The problem of particle detection, when using an isotropic neutron point source at different distances from a circular target or a radioactive source as seen by a circular detector, e. g. a solid state counter, is dealt with. Tables are given for different distances of the source when the reaction at the target has an isotropic or a cosine angular distribution in the laboratory system.

The Panther Mountain circular structure, a possible buried meteorite crater

Science.gov (United States)

Isachsen, Y. W.; Wright, S. F.; Revetta, F. A.; Duneen, R. J.

Panther Mountain, located near Phoenicia, New York, is part of the Catskill Mountains, which form the eastern end of the Allegheny Plateau in New York. It is a circular mass defined physiographically by an anomalous circular drainage pattern produced by Esopus Creek and its tributary Woodland Creek. The circular valley that rings the mountain is fracture-controlled; where bedrock is exposed, it shows a joint density 5 to 10 times greater than that on either side of the valley. Where obscured by alluvial valley fill, the bedrock's low seismic velocity suggests that this anomalous fracturing is continuous in the bedrock underlying the rim valley. North-south and east-west gravity and magnetic profiles were made across the structure. Terrane-corrected, residual gravity profiles show an 18-mgal negative anomaly, and very steep gradients indicate a near-surface source. Several possible explanations of the gravity data were modeled. We conclude that the Panther Mountain circular structure is probably a buried meteorite crater that formed contemporaneously with marine or fluvial sedimentation during Silurian or Devonian time. An examination of drill core and cuttings in the region is underway to search for ejecta deposits and possible seismic and tsunami effects in the sedimentary section. Success would result in both dating the impact and furnishing a chronostratigraphic marker horizon.

Design of Gerotor Using Cycloid and Circular-Arc Curves

Energy Technology Data Exchange (ETDEWEB)

Choi, Tae Hoon; Kim, Moon Saeng; Jung, Sung Yuen; Kim, Chul [Pusan National University, Busan (Korea, Republic of); Lee, Geun Su [Samhan Co., Ltd, Seoul (Korea, Republic of)

2011-03-15

The new gerotor developed in this paper has an inner rotor in which a circular arc is inserted between the hypocycloid and epicycloid curves, whereas the outer rotor is designed using the simulation results for the rotor and a modification method. The new gerotor has no cusps and loops and no limit on the eccentricity. We increase the average flow rate by adding a new design parameter, {gamma}, which is the inclined angle of the inner rotor at the intersection of the hypocycloid and the circular arc. A calculation method to calculate the chamber area is also developed. This method can also be used to calculate the flow rate and flow rate irregularity when the contact points are unknown. The control of eccentricity and {gamma} is expected to lead to an efficient rotor.

3D knitting using large circular knitting machines

Science.gov (United States)

Simonis, K.; Gloy, Y.-S.; Gries, T.

2017-10-01

For the first time 3D structures can now be produced on large circular knitting machines. Till date, such structures could only be manufactured on flat knitting machines. Since large circular knitting machines operate much faster, this development increases the overall productivity of 3D knits. It thus opens up a totally new avenue for cost reduction for applications in sportswear, upholstery, aerospace and automotive industry. The following paper presents the state of the art regarding the realisation of three dimensional fabrics. In addition, current knitting technologies regarding three dimensional formations will be explained. Results of the pretrials explaining the change in knitted fabrics´ dimension, executed at the Institut für Textiltechnik of the RWTH Aachen University, will be presented. Finally, the description of the 3D knit prototype developed will be provided as a part of this paper.

Antennas on circular cylinders

DEFF Research Database (Denmark)

Knudsen, H. L.

1959-01-01

On the basis of the results obtained by Silver and Saunders [4] for the field radiated from an arbitrary slot in a perfectly conducting circular cylinder, expressions have been derived for the field radiated by a narrow helical slot, with an arbitrary aperture field distribution, in a circular...... antenna in a circular cylinder. By a procedure similar to the one used by Silver and Saunders, expressions have been derived for the field radiated from an arbitrary surface current distribution on a cylinder surface coaxial with a perfectly conducting cylinder. The cases where the space between the two...

Insect and Pest Control Section newsletter and information circular on radiation techniques and their application to insect pests. No. 39

International Nuclear Information System (INIS)

1987-07-01

The Information Circular presents preliminary reports of research and development activities in the application of nuclear energy for entomological problems and related aspects. Radiation sterilization and isotope-aided studies are stressed, however, articles relating to practical pest control or eradication are also within the scope of the Information Circular

Towards Circular Business Models

DEFF Research Database (Denmark)

Guldmann, Eva; Remmen, Arne

The present report concerns the practical process of developing initiatives based on the circular economy in eight Danish companies. The report outlines how the process of integrating the circular economy was approached in each of the participating companies during 2014 and 2015 and what came out...

Administrative circular n°11 (REV. 2) – Categories of members of the personnel

CERN Multimedia

2012-01-01

Administrative Circular No. 11 (Rev. 2) entitled “Categories of members of the personnel”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 11 May 2012 and entering into force on 1 January 2013, is available on the intranet site of the Human Resources Department. This circular is applicable to all members of the personnel. It cancels and replaces Administrative Circular No. 11 (Rev. 1) entitled “Categories of members of the personnel” of January 1997 as regards all contracts of members of the personnel issued on or after 1 January 2013. The circular was revised in order to take into account developments since the last revision of the categories of personnel in 1997 as well as the needs of the Organization and collaborating institutes. In particular, it introduces a new system for distinguishing categories of associated members of the personnel, namely with regard to the purpo...

Circularity and Lambda Abstraction

DEFF Research Database (Denmark)

Danvy, Olivier; Thiemann, Peter; Zerny, Ian

2013-01-01

unknowns from what is done to them, which we lambda-abstract with functions. The circular unknowns then become dead variables, which we eliminate. The result is a strict circu- lar program a la Pettorossi. This transformation is reversible: given a strict circular program a la Pettorossi, we introduce...

The generalized circular model

NARCIS (Netherlands)

Webers, H.M.

1995-01-01

In this paper we present a generalization of the circular model. In this model there are two concentric circular markets, which enables us to study two types of markets simultaneously. There are switching costs involved for moving from one circle to the other circle, which can also be thought of as

Sistema de diagnóstico para la estimación de secciones en fallo en sistemas eléctricos de potencia; A Diagnostic Systems to Estimate Faulty Sections in Power Electric Systems

OpenAIRE

Marta Bravo de las Casas; Humberto Machado Fernández; Zenaida García Valdivia; Alain Álvarez Chávez; Isis Bonet Cruz; Norma E Cabrera González

2011-01-01

El sistema de diagnóstico para la estimación de secciones en fallo (SDESF) para sistemas eléctricos depotencia (SEP) expuesto en el trabajo, usa la información procedente de los relés operados e interruptoresdisparados. Está escrito en Prolog, lenguaje de inteligencia artificial e implementado en una computadorapersonal. La tarea básica de este sistema es entrenar a los despachadores y utilizarlo como una herramientade apoyo a la toma de decisi...

Best Practice Examples of Circular Business Models

DEFF Research Database (Denmark)

Guldmann, Eva

Best practice examples of circular business models are presented in this report. The purpose is to inform and inspire interested readers, in particular companies that aspire to examine the potentials of the circular economy. Circular business models in two different sectors are examined, namely...... the textile and clothing sector as well as the durable goods sector. In order to appreciate the notion of circular business models, the basics of the circular economy are outlined along with three frameworks for categorizing the various types of circular business models. The frameworks take point of departure...... in resource loops, value bases and business model archetypes respectively, and they are applied for analysing and organizing the business models that are presented throughout the report. The investigations in the report show that circular business models are relevant to businesses because they hold...

Escoamento uniforme em canais circulares lisos. Parte I: adaptação e validação do método de Kazemipour Uniform flow in smooth circular channels. Part I: adaptation and validation of the Kazemipour method

Directory of Open Access Journals (Sweden)

Maurício C. Goldfarb

2004-12-01

Full Text Available A partir da equação de von Karman Prandtl para tubos pressurizados, Kazemipour & Apelt (1980 desenvolveram uma metodologia para cálculo do escoamento em canais circulares lisos, denominada método de Kazemipour o qual, apesar de apresentar resultados de bastante eficiência necessita, no entanto, de recursos gráficos na sua aplicação, o que impossibilita a solução através de métodos computacionais e, também, a comparação deste com outras metodologias existentes. Neste trabalho, mostram-se os resultados da investigação analítica que resulta na validação do método de Kazemipour, como também o ajuste, de acordo com o procedimento proposto por Silva & Figueiredo (1993, de maneira a tornar o procedimento completamente equacionável sem a necessidade de recursos gráficos. O resultado encontrado é satisfatório e sua aplicação é apresentada num exemplo de aplicação prática.Considering the von Karman Prandtl equation for pressurized tubes, Kazemipour & Apelt (1980 developed a methodology for flow calculation in smooth circular channels, denominated as method of Kazemipour. Inspite of good results, the Kazemipour method needs graphic tools in its application, which makes its solution through computational methods and comparison to other existing methodologies difficult. In this research, the results of the analytic investigation that provides the validation of the Kazemipour method are shown, as well as the adjustments according to procedure proposed by Silva & Figueiredo (1993, performed in such a way to make the procedure independent of graphic tools. The result obtained is satisfactory and its use is presented in an example of practical application.

Factores que afectan la distribución circular del muérdago sin hojas Tristerix aphyllus (Loranthaceae sobre el cacto Echinopsis chilensis Factors affecting the circular distribution of the leafless mistletoe Tristerix aphyllus (Loranthaceae on the cactus Echinopsis chilensis

Directory of Open Access Journals (Sweden)

CAREZZA BOTTO-MAHAN

2000-09-01

Full Text Available Describimos el patrón de emergencia del muérdago holoparásito Tristerix aphyllus desde su cacto hospedador Echinopsis chilensis en un ecosistema semiárido de Chile. La distribución circular de las inflorescencias del parásito difirió significativamente de una distribución uniforme basada en un proceso aleatorio. Cuantificamos la distribución circular de las semillas defecadas sobre la superficie del cacto por el mímido Mimus thenca, el único ave responsable de la dispersión del muérdago. Nuestros datos no sostuvieron la idea de una deposición de semillas direccional por parte del ave. Para someter a prueba la hipótesis que la distribución circular observada es atribuible a una sobrevivencia diferencial de las semillas debido a variación térmica entre micrositios, infectamos cactos con semillas de T. aphyllus cada 30º y evaluamos la temperatura asociada a cada ángulo. Aun cuando las semillas ubicadas en ángulos con mayor exposición solar presentaron la menor formación de disco haustorial, esta variación en mortalidad no fue suficiente para dar cuenta de la polaridad angular observada. No obstante, las inflorescencias de T. aphyllus que emergieron 17 meses después de la infección experimental, revelaron estadígrafos circulares indistinguibles de aquellos observados en la situación natural. La inspección de la estructura anatómica en dos ángulos opuestos de la cactácea reveló diferencias en la constitución de la epidermis, observándose un espesor en promedio cuatro veces mayor en las muestras orientadas hacia el norte que en las orientadas hacia el sur debido a la formación de corteza altamente lignificada. Sugerimos que la formación de corteza es probablemente el factor más importante en determinar la distribución circular sesgada de T. aphyllusWe describe the pattern of emergence of the holoparasitic mistletoe Tristerix aphyllus from its cactus host Echinopsis chilensis in a semiarid Chilean ecosystem. The

Bifurcation and stability analysis of rotating chemical spirals in circular domains: Boundary-induced meandering and stabilization

Science.gov (United States)

Bär, Markus; Bangia, Anil K.; Kevrekidis, Ioannis G.

2003-05-01

Recent experimental and model studies have revealed that the domain size may strongly influence the dynamics of rotating spirals in two-dimensional pattern forming chemical reactions. Hartmann et al. [Phys. Rev. Lett. 76, 1384 (1996)], report a frequency increase of spirals in circular domains with diameters substantially smaller than the spiral wavelength in a large domain for the catalytic NO+CO reaction on a microstructured platinum surface. Accompanying simulations with a simple reaction-diffusion system reproduced the behavior. Here, we supplement these studies by a numerical bifurcation and stability analysis of rotating spirals in a simple activator-inhibitor model. The problem is solved in a corotating frame of reference. No-flux conditions are imposed at the boundary of the circular domain. At large domain sizes, eigenvalues and eigenvectors very close to those corresponding to infinite medium translational invariance are observed. Upon decrease of domain size, we observe a simultaneous change in the rotation frequency and a deviation of these eigenvalues from being neutrally stable (zero real part). The latter phenomenon indicates that the translation symmetry of the spiral solution is appreciably broken due to the interaction with the (now nearby) wall. Various dynamical regimes are found: first, the spiral simply tries to avoid the boundary and its tip moves towards the center of the circular domain corresponding to a negative real part of the “translational” eigenvalues. This effect is noticeable at a domain radius of R

Circular Formation Control of Multiagent Systems with Any Preset Phase Arrangement

Directory of Open Access Journals (Sweden)

Lina Jin

2018-01-01

Full Text Available This paper deals with the circular formation control problem of multiagent systems for achieving any preset phase distribution. The control problem is decomposed into two parts: the first is to drive all the agents to a circle which either needs a target or not and the other is to arrange them in positions distributed on the circle according to the preset relative phases. The first part is solved by designing a circular motion control law to push the agents to approach a rotating transformed trajectory, and the other is settled using a phase-distributed protocol to decide the agents’ positioning on the circle, where the ring topology is adopted such that each agent can only sense the relative positions of its neighboring two agents that are immediately in front of or behind it. The stability of the closed-loop system is analyzed, and the performance of the proposed controller is verified through simulations.

75 FR 35125 - Unblocking of Specially Designated Nationals and Blocked Persons Pursuant to the Foreign...

Science.gov (United States)

2010-06-21

... California CP 22000, Mexico; Calle Granito No. 2025, Seccion El Dorado, Fraccionamiento Playas de Tijuana, Tijuana, Baja California, Mexico; Calle Granito No. 602, Seccion El Dorado, Fraccionamiento Playas de... blocked pursuant to the Kingpin Act. 1. Carrillo Rodriguez, Luis Miguel, c/o VUELA PERU S.A.C., Lima, Peru...

Circular motion of particles suspended in a Gaussian beam with circular polarization validates the spin part of the internal energy flow

DEFF Research Database (Denmark)

Angelsky, O. V.; Bekshaev, A. Ya.; Maksimyak, P. P.

2012-01-01

switching to the right (left) circular polarization, the particles performed spinning motion in agreement with the angular momentum imparted by the field, but they were involved in an orbital rotation around the beam axis as well, which in previous works [Y. Zhao et al, Phys. Rev. Lett. 99, 073901 (2007......Non-spherical dielectric microparticles were suspended in a water-filled cell and exposed to a coherent Gaussian light beam with controlled state of polarization. When the beam polarization is linear, the particles were trapped at certain off-axial position within the beam cross section. After...... of inhomogeneously polarized paraxial beams [A. Bekshaev et al, J. Opt. 13, 053001 (2011)]....

A Conceptual Framework for Circular Design

Directory of Open Access Journals (Sweden)

Mariale Moreno

2016-09-01

Full Text Available Design has been recognised in the literature as a catalyst to move away from the traditional model of take-make-dispose to achieve a more restorative, regenerative and circular economy. As such, for a circular economy to thrive, products need to be designed for closed loops, as well as be adapted to generate revenues. This should not only be at the point of purchase, but also during use, and be supported by low-cost return chains and reprocessing structures, as well as effective policy and regulation. To date, most academic and grey literature on the circular economy has focused primarily on the development of new business models, with some of the latter studies addressing design strategies for a circular economy, specifically in the area of resource cycles and design for product life extension. However, these studies primarily consider a limited spectrum of the technical and biological cycles where materials are recovered and restored and nutrients (e.g., materials, energy, water are regenerated. This provides little guidance or clarity for designers wishing to design for new circular business models in practice. As such, this paper aims to address this gap by systematically analysing previous literature on Design for Sustainability (DfX (e.g., design for resource conservation, design for slowing resource loops and whole systems design and links these approaches to the current literature on circular business models. A conceptual framework is developed for circular economy design strategies. From this conceptual framework, recommendations are made to enable designers to fully consider the holistic implications for design within a circular economy.

Asymptotic theory of circular polarization memory.

Science.gov (United States)

Dark, Julia P; Kim, Arnold D

2017-09-01

We establish a quantitative theory of circular polarization memory, which is the unexpected persistence of the incident circular polarization state in a strongly scattering medium. Using an asymptotic analysis of the three-dimensional vector radiative transfer equation (VRTE) in the limit of strong scattering, we find that circular polarization memory must occur in a boundary layer near the portion of the boundary on which polarized light is incident. The boundary layer solution satisfies a one-dimensional conservative scattering VRTE. Through a spectral analysis of this boundary layer problem, we introduce the dominant mode, which is the slowest-decaying mode in the boundary layer. To observe circular polarization memory for a particular set of optical parameters, we find that this dominant mode must pass three tests: (1) this dominant mode is given by the largest, discrete eigenvalue of a reduced problem that corresponds to Fourier mode k=0 in the azimuthal angle, and depends only on Stokes parameters U and V; (2) the polarization state of this dominant mode is largely circular polarized so that |V|≫|U|; and (3) the circular polarization of this dominant mode is maintained for all directions so that V is sign-definite. By applying these three tests to numerical calculations for monodisperse distributions of Mie scatterers, we determine the values of the size and relative refractive index when circular polarization memory occurs. In addition, we identify a reduced, scalar-like problem that provides an accurate approximation for the dominant mode when circular polarization memory occurs.

Spontaneous excitation of a circularly accelerated atom coupled to electromagnetic vacuum fluctuations

International Nuclear Information System (INIS)

Jin, Yao; Hu, Jiawei; Yu, Hongwei

2014-01-01

We study, using the formalism proposed by Dalibard, Dupont-Roc and Cohen-Tannoudji, the contributions of the vacuum fluctuation and radiation reaction to the rate of change of the mean atomic energy for a circularly accelerated multilevel atom coupled to vacuum electromagnetic fields in the ultrarelativistic limit. We find that the balance between vacuum fluctuation and radiation reaction is broken, which causes spontaneous excitations of accelerated ground state atoms in vacuum. Unlike for a circularly accelerated atom coupled to vacuum scalar fields, the contribution of radiation reaction is also affected by acceleration, and this term takes the same form as that of a linearly accelerated atom coupled to vacuum electromagnetic fields. For the contribution of vacuum fluctuations, we find that in contrast to the linear acceleration case, terms proportional to the Planckian factor are replaced by those proportional to a non-Planck exponential term, and this indicates that the radiation perceived by a circularly orbiting observer is no longer thermal as is in the linear acceleration case. However, for an ensemble of two-level atoms, an effective temperature can be defined in terms of the atomic transition rates, which is found to be dependent on the transition frequency of the atom. Specifically, we calculate the effective temperature as a function of the transition frequency and find that in contrast to the case of circularly accelerated atoms coupled to the scalar field, the effective temperature in the current case is always larger than the Unruh temperature. -- Highlights: •We study the spontaneous excitation of a circularly accelerated atom. •Contribution of radiation reaction to the excitation is affected by acceleration. •The radiation perceived by a circularly orbiting observer is no longer thermal. •An effective temperature can be defined in terms of atomic transition rates. •Effective temperature is larger than Unruh temperature and frequency-dependent

Neurotransmitter implications in descending motility of longitudinal and circular muscles in rat colon

Directory of Open Access Journals (Sweden)

Zornitsa V. Gorcheva

2018-03-01

Full Text Available Introduction. The role of neurotransmitter systems in the motor activity of longitudinal or circular muscles in autonomic regulation of the motility of the colon by the nervous system is unclear. The aim of the study was to investigate the neurotransmitter implications in descending motility of longitudinal and circular muscles in rat colon. Methods. Electrically-induced (2, 5 or 10 Hz, 0.8 ms, 40 V, 20 s local or descending motor responses of longitudinal and circular muscles in isolated preparations and drugs were used to define the neurotransmitters’ role in colonic motility. Results. The spontaneous activity of the distal part of preparations manifested as high-amplitude irregular contractions more expressed in the longitudinal muscles. The electrically-induced local responses differed considerably in the two muscles: in longitudinal muscle there were frequency-dependent contractions, while initial relaxation followed by contraction was observed in circular muscle. The descending motor response resembled the pattern of the local responses, but the amplitudes were significantly less expressed, as compared to the respective local responses.

How to Assess Product Performance in the Circular Economy? Proposed Requirements for the Design of a Circularity Measurement Framework

OpenAIRE

Saidani , Michael; YANNOU , Bernard; Leroy , Yann; Cluzel , François

2017-01-01

International audience; Assessing product circularity performance is not straightforward. Meanwhile, it gains increasingly importance for businesses and industrial practitioners who are willing to effectively take benefits from circular economy promises. Thus, providing methods and tools to evaluate then enhance product performance—in the light of circular economy—becomes a significant but still barely addressed topic. Following a joint agreement on the need to measure product circularity per...

Testing the magnetar scenario for superluminous supernovae with circular polarimetry

Science.gov (United States)

Cikota, Aleksandar; Leloudas, Giorgos; Bulla, Mattia; Inserra, Cosimo; Chen, Ting-Wan; Spyromilio, Jason; Patat, Ferdinando; Cano, Zach; Cikota, Stefan; Coughlin, Michael W.; Kankare, Erkki; Lowe, Thomas B.; Maund, Justyn R.; Rest, Armin; Smartt, Stephen J.; Smith, Ken W.; Wainscoat, Richard J.; Young, David R.

2018-05-01

Superluminous supernovae (SLSNe) are at least ˜5 times more luminous than common supernovae (SNe). Especially hydrogen-poor SLSN-I are difficult to explain with conventional powering mechanisms. One possible scenario that might explain such luminosities is that SLSNe-I are powered by an internal engine, such as a magnetar or an accreting black hole. Strong magnetic fields or collimated jets can circularly polarize light. In this work, we measured circular polarization of two SLSNe-I with the FOcal Reducer and low dispersion Spectrograph (FORS2) mounted at the ESO's Very Large Telescope (VLT). PS17bek, a fast evolving SLSN-I, was observed around peak, while OGLE16dmu, a slowly evolving SLSN-I, was observed 100 days after maximum. Neither SLSN shows evidence of circularly polarized light, however, these non-detections do not rule out the magnetar scenario as the powering engine for SLSNe-I. We calculate the strength of the magnetic field and the expected circular polarization as a function of distance from the magnetar, which decreases very fast. Additionally, we observed no significant linear polarization for PS17bek at four epochs, suggesting that the photosphere near peak is close to spherical symmetry.

Circular Updates

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Circular Updates are periodic sequentially numbered instructions to debriefing staff and observers informing them of changes or additions to scientific and specimen...

Optimización de secciones de vigas y columnas para el cumplimiento de la deriva en edificaciones de concreto reforzado mediante Redes Neuronales Artificiales

Directory of Open Access Journals (Sweden)

Jorge Arcila Zea

2014-01-01

Full Text Available Este artículo presenta los resultados del uso de Redes Neuronales Artificiales (RNA para la estimación de secciones óptimas de vigas y columnas en concreto reforzado en edificaciones aporticadas simétricas de 1 a 6 pisos teniendo en cuenta los requisitos mínimos exigidos en la NSR-10 relacionados con la deriva y el diseño sísmico. Además se estudió la sensibilidad de la deriva respecto a los valores de dimensiones de vigas y de columnas, para que una vez se tenga una mejor comprensión de dicha relación, se puedan obtener diseños óptimos de manera más rápida, sencilla y confiable en comparación con los procedimientos utilizados actualmente.

Analytical solution to the circularity problem in the discounted cash flow valuation framework

Directory of Open Access Journals (Sweden)

Felipe Mejía-Peláez

2011-12-01

Full Text Available In this paper we propose an analytical solution to the circularity problem between value and cost of capital. Our solution is derived starting from a central principle of finance that relates value today to value, cash flow, and the discount rate for next period. We present a general formulation without circularity for the equity value (E, cost of levered equity (Ke, levered firm value (V, and the weighted average cost of capital (WACC. We furthermore compare the results obtained from these formulas with the results of the application of the Adjusted Present Value approach (no circularity and the iterative solution of circularity based upon the iteration feature of a spreadsheet, concluding that all methods yield exactly the same answer. The advantage of this solution is that it avoids problems such as using manual methods (i.e., the popular “Rolling WACC” ignoring the circularity issue, setting a target leverage (usually constant with the inconsistencies that result from it, the wrong use of book values, or attributing the discrepancies in values to rounding errors.

Decaying Two-Dimensional Turbulence in a Circular Container

OpenAIRE

Schneider, Kai; Farge, Marie

2005-01-01

We present direct numerical simulations of two-dimensional decaying turbulence at initial Reynolds number 5×104 in a circular container with no-slip boundary conditions. Starting with random initial conditions the flow rapidly exhibits self-organization into coherent vortices. We study their formation and the role of the viscous boundary layer on the production and decay of integral quantities. The no-slip wall produces vortices which are injected into the bulk flow and tend to compensate the...

Broadband Circularly Polarized Slot Antenna Loaded by a Multiple-Circular-Sector Patch.

Science.gov (United States)

Trinh-Van, Son; Yang, Youngoo; Lee, Kang-Yoon; Hwang, Keum Cheol

2018-05-15

In this paper, a microstrip-fed broadband circularly polarized (CP) slot antenna is presented. CP operation can be attained simply by embedding an S-shaped strip. By loading with a multiple-circular-sector patch, which consists of 12 circular-sector patches with identical central angles of 30° and different radii, the 3 dB axial ratio (AR) bandwidth is significantly broadened. To validate the performance of the proposed antenna, an antenna prototype is fabricated and tested. The fabricated antenna is 54 mm × 54 mm × 0.8 mm in size. The measured -10 dB reflection and 3 dB AR bandwidths are 81.06% (1.68⁻3.97 GHz) and 70.55% (1.89⁻3.95 GHz), respectively. Within the 3 dB AR bandwidth, the measured peak gain is 3.81 dBic. Reasonable agreement is also obtained between the measured and simulated results.

77 FR 60170 - Americans With Disabilities Act: Proposed Circular Chapter, Vehicle Acquisition

Science.gov (United States)

2012-10-02

... specifications in Part 38 by vehicle type. The section begins by emphasizing that an accessible bus or rail car... With Disabilities Act: Proposed Circular Chapter, Vehicle Acquisition AGENCY: Federal Transit... buses and rail cars they acquire meet the requirements of the U.S. Department of Transportation's (DOT...

Circular Business: Collaborate and Circulate : a bookreview

NARCIS (Netherlands)

Timmermans, Ratna W.; Witjes, S.|info:eu-repo/dai/nl/381088200

2016-01-01

With their book, “Circular Business: Collaborate and Circulate”, Circular Collaboration, Amersfoort, ISBN: 978-90-824902-0-6, €35, Kraaijenhagen et al. (2016) give companies practical guidance on their contribution to the development of a more circular economy by presenting a practical 10-step

The Modeling of Viscoelastic Circular Plates for Use as Waveguide Absorbers

Science.gov (United States)

1988-09-01

oncituoe Security Ciasstircation) X THE MODELING OF VISCOELASTIC CIRCULAR PLATES FOR USE AS WAVEGUIDE ABSORBERS C 12 PERSONAL AUTmO ?S) -Hettema...33mvU3dT’U Figure 67. Experimental Jmainiey Part ot the Driving Point Jmpedancs of a 6 in Radius Elastic Plate, With and Without aaker and Mount Conecon, In

Symplectic methods in circular accelerators

International Nuclear Information System (INIS)

Forest, E.

1994-01-01

By now symplectic integration has been applied to many problems in classical mechanics. It is my conviction that the field of particle simulation in circular rings is ideally suited for the application of symplectic integration. In this paper, I present a short description symplectic tools in circular storage rings

76 FR 60593 - Title VI; Proposed Circular

Science.gov (United States)

2011-09-29

..., several of them related to ambiguous language in the existing Circular. The proposed Circular reorganizes... regional entity, and inclusive of public and private entities. This term is used exclusively in Chapter IV... revisions to the Title VI Circular. The section that addresses the existing requirement for a Language...

Exploring the implementation of a circular economy strategy: the case of a closed-loop supply of aluminum beverage cans

DEFF Research Database (Denmark)

Stewart, Raphaëlle Marie Marianne; Niero, Monia; Murdock, Karen

2018-01-01

The circular economy concept provides a key opportunity to address the challenge of resource scarcity for both policy makers and industries. Companies are urged to play their part and integrate circular economy in their business. However, little has been said about how implementation should occur...... and the consequences for the industry. This paper explores possibilities for the business implementation of a beverage producer’s circular economy strategy, which consists in setting up a closed-loop supply of aluminum beverage cans. For this purpose, we develop a business model-inspired framework derived from...

Linearly and circularly polarized laser photoinduced molecular order in azo dye doped polymer films

Directory of Open Access Journals (Sweden)

Saad Bendaoud

2017-01-01

Full Text Available Photo-induced behavior of Azo Disperse one (AZD1 doped Poly(Methyl MethAcrylate (PMMA using both linear and circular polarized light is studied. The anisotropy is not erased by the circular polarization light. The circular polarization light combined with relatively long lifetime of the cis state in azo dye doped polymers activate all transverse directions of the angular hole burning through the spot in the film inducing anisotropy. Under circular polarized light, there is no orientation perpendicularly to the helex described by the rotating electric field vector, trans molecules reorients in the propagation direction of the pump beam. The polarization state of the probe beam after propagation through the pumped spot depends strongly on the angle of incidence of both pump and probe beams on the input face. In the case where circular polarized pump and probe beams are under the same angle of incidence, the probe beam “sees” anisotropic film as if it is isotropic. Results of this work shows the possibility to reorient azobenzene-type molecules in two orthogonal directions using alternately linearly and circularly polarized beams.

Designing Business Solutions for Plastic Waste Management to Enhance Circular Transitions in Kenya

Directory of Open Access Journals (Sweden)

Balint Horvath

2018-05-01

Full Text Available Least-developed countries face many challenges regarding their plastic waste management systems. In 2017, Kenya imposed a selective ban targeting manufacturers and consumers of plastic carrier bags. However, this selectivity does not avoid the continuous use of other plastic products. The present paper states that circular priorities, which have been defined to advanced economies, would not be entirely valid for the rest of the world. While high-income countries face only the impacts of their own consumption, developing nations must endure the externalities of these developed economies. Thus, the focus of the least developed part of the world must not be on reducing its relatively normal (or even low consumption, but to manage its surplus material flow. According to the employed circular evaluation methodology (CEV—Circular Economic Value, the circularity level in Kenya’s plastic material flow stands on a rather low stage with 32.72%. This result outlines the linear deficiencies of the plastic waste management system and urges the prevention of further material leakage (such as energy use. Through the Business Model Canvas (BMC approach this study offers a holistic business solution which can improve the system’s sustainability.

LUDOPATHY AND THE EMPLOYEES AT SAINT BONAVENTURE UNIVERSITY, MEDELLIN BRANCH, COLOMBIA, 2010. La ludopatá y los empleados en la Universidad de San Buenaventura seccional Medellín – 2010

OpenAIRE

Victor Hugo Cano Bedoya; Jorge Arturo Pérez Pérez

2010-01-01

RESUMEN:El presente estudio consiste en una descripción del uso de los juegos de azar y vídeo juegos en los estudiantes, docentes y empleados de la Universidad de San Buenaventura, seccional de Medellín, y su relación con las dimensiones médica y psicológica con variables como son: dificultades de concentración, cambio del estado de ánimo, las molestias físicas, preferir el juego a las prácticas deportivas y la distensión que produce el juego; en este tercer momento se presentan los resultado...

Flexión y compresión compuestas en secciones rectangulares. Método en rotura del momento tope

Directory of Open Access Journals (Sweden)

Jiménez Montoya, P.

1963-09-01

Full Text Available This is a systematic summary of studies on rectangular sections subjected to compound loading and bending, calculated by the method of ultimate bending moment. The studies are part of the work which the author is preparing on reinforced and prestressed concrete. The method of ultimate bending moment, which is based on the rheological properties of concrete and on the new concepts of safety factors, has been accepted by the European Committee on Concrete (C. E. B. after being proposed by the Spanish Committee. It is very useful, since it is a simple procedure, and is also closer to reality than the classical methods. Also, this is the method of calculation adopted m the recent Specification H. A. 61, for reinforced concrete structures, issued by the Instituto Eduardo Torroja. The object of this paper is to give an account of the ultimate bending moment method, by establishing the equilibrium and compatibility equations, and applying them to the various design and calculation problems that most often arise. To simplify the task of the calculating technician, a number of monograms have been constructed, which are easy to operate. Only two of these are given in this paper, in order to limit the length of the latter.Constituye este trabajo un resumen ordenado del estudio de secciones rectangulares sometidas a flexión o compresión compuesta, por el método del momento tope, que forma parte de la obra que el autor tiene en preparación sobre hormigón armado y pretensado. El método del momento tope, basado en las propiedades reológicas del hormigón y en los nuevos conceptos del coeficiente de seguridad, ha sido admitido por el Comité Européen du Béton (C. E. B., a propuesta de la Comisión española, y es de mucha utilidad por constituir un procedimiento muy sencillo, y a la vez más de acuerdo con la realidad, que los métodos clásicos. Por otra parte, este es el método de cálculo adoptado por la reciente Instrucción H. A. 61, especial

Non-Asymptotic Confidence Sets for Circular Means

Directory of Open Access Journals (Sweden)

Thomas Hotz

2016-10-01

Full Text Available The mean of data on the unit circle is defined as the minimizer of the average squared Euclidean distance to the data. Based on Hoeffding’s mass concentration inequalities, non-asymptotic confidence sets for circular means are constructed which are universal in the sense that they require no distributional assumptions. These are then compared with asymptotic confidence sets in simulations and for a real data set.

Cygnus X-1: Discovery of variable circular polarization

International Nuclear Information System (INIS)

Michalsky, J.J.; Swedlund, J.B.; Stokes, R.A.

1975-01-01

HDE 226868, the optical counterpart of Cyg X-1, has been observed for circular polarization during 1974. Observations in five colors suggest that circular polarization results from an interstellar effect. Measurements of the blue polarization reveal circular polarization variations synchronous with the 5)./sub /6 orbital period. The circular polarization variation appears to be similar to the blue intensity variation

Report of the group on beam-beam effects in circular colliders

International Nuclear Information System (INIS)

Furman, M.A.

1991-05-01

We present a summary of the discussions and conclusions of the working group on beam-beam effects for circular colliders. This group was part of the larger beam-beam dynamics group at the 7th ICFA Workshop on Beam Dynamics, on the subject ''Beam-Beam and Beam-Radiation Interactions,'' held at UCLA, May 13--16, 1991. 15 refs

Experimental study of the effect of icing on the aerodynamics of circular cylinders - Part II: Inclined flow

DEFF Research Database (Denmark)

Demartino, C.; Georgakis, Christos T.; Ricciardelli, F.

are produced from HDPE, as used for bridge stays. Variations in the accretion parameters were chosen to generate the most common natural ice formations, which might also be expected to produce bridge cable vibrations. A parallel paper deals with the case of circular cylinders in cross flow....

Circularly Polarized Microwave Antenna Element with Very Low Off-Axis Cross-Polarization

Science.gov (United States)

Greem. David; DuToit, Cornelis

2013-01-01

The goal of this work was to improve off-axis cross-polarization performance and ease of assembly of a circularly polarized microwave antenna element. To ease assembly, the initial design requirement of Hexweb support for the internal circuit part, as well as the radiating disks, was eliminated. There is a need for different plating techniques to improve soldering. It was also desirable to change the design to eliminate soldering as well as the need to use the Hexweb support. Thus, a technique was developed to build the feed without using solder, solving the lathing and soldering issue. Internal parts were strengthened by adding curvature to eliminate Hexweb support, and in the process, the new geometries of the internal parts opened the way for improving the off-axis cross-polarization performance as well. The radiating disks curvatures were increased for increased strength, but it was found that this also improved crosspolarization. Optimization of the curvatures leads to very low off-axis cross-polarization. The feed circuit was curved into a cylinder for improved strength, eliminating Hexweb support. An aperture coupling feed mechanism eliminated the need for feed pins to the disks, which would have required soldering. The aperture coupling technique also improves cross-polarization performance by effectively exciting the radiating disks very close to the antenna s central axis of symmetry. Because of the shape of the parts, it allowed for an all-aluminum design bolted together and assembled with no solder needed. The advantage of a solderless design is that the reliability is higher, with no single-point failure (solder), and no need for special plating techniques in order to solder the unit together. The shapes (curved or round) make for a more robust build without extra support materials, as well as improved offaxis cross-polarization.

Development pattern of circular economy in Jiangsu coastland

OpenAIRE

Wang, Liang

2009-01-01

Circular economy is an effective development pattern to balance economic growth, social development and environmental protection. Based on apprehending the connotation of circular economy, this paper fully considers and studies on the future trends in this area according to the theory of circular economy and the empirical circumstances of Jiangsu Coastland. This paper also discusses the circular economy development pattern adopted by Jiangsu coastland during economic and social development fr...

CiSE: a circular spring embedder layout algorithm.

Science.gov (United States)

Dogrusoz, Ugur; Belviranli, Mehmet E; Dilek, Alptug

2013-06-01

We present a new algorithm for automatic layout of clustered graphs using a circular style. The algorithm tries to determine optimal location and orientation of individual clusters intrinsically within a modified spring embedder. Heuristics such as reversal of the order of nodes in a cluster and swap of neighboring node pairs in the same cluster are employed intermittently to further relax the spring embedder system, resulting in reduced inter-cluster edge crossings. Unlike other algorithms generating circular drawings, our algorithm does not require the quotient graph to be acyclic, nor does it sacrifice the edge crossing number of individual clusters to improve respective positioning of the clusters. Moreover, it reduces the total area required by a cluster by using the space inside the associated circle. Experimental results show that the execution time and quality of the produced drawings with respect to commonly accepted layout criteria are quite satisfactory, surpassing previous algorithms. The algorithm has also been successfully implemented and made publicly available as part of a compound and clustered graph editing and layout tool named CHISIO.

Circular No. 62 of 2 August 1984 on radiation protection of patients in radiology and nuclear medicine

International Nuclear Information System (INIS)

1984-01-01

This Circular by the Ministry of Health is based on the Directive of the Council of the European Communities of 3 September 1984 laying down basic measures for the radiation protection of persons undergoing medical examination or treatment. (NEA) [fr

Total and Differential Efficiencies for a Circular Detector Viewing a Circular Radiator of Finite Thickness

Energy Technology Data Exchange (ETDEWEB)

Lauber, A; Tollander, B

1967-08-15

Total and differential detection efficiencies have been computed for a circular detector viewing a circular radiator of finite thickness. Isotropic, cosines and n-p scattering angular emission distributions of the radiated particles are considered. Tables are given for the total efficiencies as well as for the differential efficiencies in the n-p scattering case.

Circular codes revisited: a statistical approach.

Science.gov (United States)

Gonzalez, D L; Giannerini, S; Rosa, R

2011-04-21

In 1996 Arquès and Michel [1996. A complementary circular code in the protein coding genes. J. Theor. Biol. 182, 45-58] discovered the existence of a common circular code in eukaryote and prokaryote genomes. Since then, circular code theory has provoked great interest and underwent a rapid development. In this paper we discuss some theoretical issues related to the synchronization properties of coding sequences and circular codes with particular emphasis on the problem of retrieval and maintenance of the reading frame. Motivated by the theoretical discussion, we adopt a rigorous statistical approach in order to try to answer different questions. First, we investigate the covering capability of the whole class of 216 self-complementary, C(3) maximal codes with respect to a large set of coding sequences. The results indicate that, on average, the code proposed by Arquès and Michel has the best covering capability but, still, there exists a great variability among sequences. Second, we focus on such code and explore the role played by the proportion of the bases by means of a hierarchy of permutation tests. The results show the existence of a sort of optimization mechanism such that coding sequences are tailored as to maximize or minimize the coverage of circular codes on specific reading frames. Such optimization clearly relates the function of circular codes with reading frame synchronization. Copyright © 2011 Elsevier Ltd. All rights reserved.

Building a Circular Future

DEFF Research Database (Denmark)

Merrild, Heidi

2016-01-01

Natural resources are scarce and construction accounts for 40 percent of the material and energy consumption in Europe. This means that a switch to a circular future is necessary. ’Building a Circular Future’ maps out where we are, where we are going, and what is needed for this conversion to take...... on the project’s strategies. The financial result is a profit of DKK 35 million on the structure alone in the demolition of a building built for the cost of DKK 860 million. The total potential for the whole building, calculated in projected material prices, is estimated to be up to 16% of the total construction...... of the circular strategies is not only in the future. Increased flexibility, optimized operation and maintenance, as well as a healthier building, is low-hanging fruit that can be harvested today. The project’s principles can be implemented in industrialized construction in a large scale today. That is proven...

Are eikonal quasinormal modes linked to the unstable circular null geodesics?

Directory of Open Access Journals (Sweden)

R.A. Konoplya

2017-08-01

Full Text Available In Cardoso et al. [6] it was claimed that quasinormal modes which any stationary, spherically symmetric and asymptotically flat black hole emits in the eikonal regime are determined by the parameters of the circular null geodesic: the real and imaginary parts of the quasinormal mode are multiples of the frequency and instability timescale of the circular null geodesics respectively. We shall consider asymptotically flat black hole in the Einstein–Lovelock theory, find analytical expressions for gravitational quasinormal modes in the eikonal regime and analyze the null geodesics. Comparison of the both phenomena shows that the expected link between the null geodesics and quasinormal modes is violated in the Einstein–Lovelock theory. Nevertheless, the correspondence exists for a number of other cases and here we formulate its actual limits.

Are eikonal quasinormal modes linked to the unstable circular null geodesics?

Science.gov (United States)

Konoplya, R. A.; Stuchlík, Z.

2017-08-01

In Cardoso et al. [6] it was claimed that quasinormal modes which any stationary, spherically symmetric and asymptotically flat black hole emits in the eikonal regime are determined by the parameters of the circular null geodesic: the real and imaginary parts of the quasinormal mode are multiples of the frequency and instability timescale of the circular null geodesics respectively. We shall consider asymptotically flat black hole in the Einstein-Lovelock theory, find analytical expressions for gravitational quasinormal modes in the eikonal regime and analyze the null geodesics. Comparison of the both phenomena shows that the expected link between the null geodesics and quasinormal modes is violated in the Einstein-Lovelock theory. Nevertheless, the correspondence exists for a number of other cases and here we formulate its actual limits.

Perceptions of Circular Business Models in SMEs

Directory of Open Access Journals (Sweden)

Sebastian-Ion Ceptureanu

2018-05-01

Full Text Available Testing circular economy business models is crucial in understanding Circular Economy features across various industries. This paper analyses Circular Economy perceptions in Romanian SMEs by investigating entrepreneurs from PVC joinery industry. Using a multidimensional framework, ReSOLVE, as a conceptual model, and Lewandowski systematization, we measured 6 business actions and their relations with Value creation. The results of our survey can be described as mixed. Of the 6 business actions of ReSOLVE framework, for half of them (Regenerate, Optimize and Exchange we can definitely conclude that these are correlated with Circular Economy in terms of Value Creation, while for a fourth there are variables significantly correlated without being able to conclude its overall contribution in terms of Value creation. Our empirical investigation contributes to literature development on Circular Economy research in SMEs and a step forward to shape future research initiatives.

Localization of CO2 Leakage from a Circular Hole on a Flat-Surface Structure Using a Circular Acoustic Emission Sensor Array

Directory of Open Access Journals (Sweden)

Xiwang Cui

2016-11-01

Full Text Available Leak localization is essential for the safety and maintenance of storage vessels. This study proposes a novel circular acoustic emission sensor array to realize the continuous CO2 leak localization from a circular hole on the surface of a large storage vessel in a carbon capture and storage system. Advantages of the proposed array are analyzed and compared with the common sparse arrays. Experiments were carried out on a laboratory-scale stainless steel plate and leak signals were obtained from a circular hole in the center of this flat-surface structure. In order to reduce the influence of the ambient noise and dispersion of the acoustic wave on the localization accuracy, ensemble empirical mode decomposition is deployed to extract the useful leak signal. The time differences between the signals from the adjacent sensors in the array are calculated through correlation signal processing before estimating the corresponding distance differences between the sensors. A hyperbolic positioning algorithm is used to identify the location of the circular leak hole. Results show that the circular sensor array has very good directivity toward the circular leak hole. Furthermore, an optimized method is proposed by changing the position of the circular sensor array on the flat-surface structure or adding another circular sensor array to identify the direction of the circular leak hole. Experiential results obtained on a 100 cm × 100 cm stainless steel plate demonstrate that the full-scale error in the leak localization is within 0.6%.

Theoretical confirmation of Feynman's hypothesis on the creation of circular vortices in Bose-Einstein condensates: II

Energy Technology Data Exchange (ETDEWEB)

Senatorski, A; Infeld, E [Soltan Institute for Nuclear Studies, Hoza 69, 00-681 Warsaw (Poland)

2004-09-15

In a recent paper (Infeld and Senatorski 2003 J. Phys.: Condens. Matter 15 5865) we confirmed Feynman's hypothesis on how circular vortices can be created from an oppositely polarized linear pair in a Bose-Einstein condensate. This was done by perturbing the original pair numerically, so that a circular vortex (or array of identical circular vortices) was created as a result of reconnection. These circular vortices were then checked against known theoretical relations binding velocities and radii. Agreement to a high degree of accuracy was found. Here in part II, we give examples of the creation of several different vortices from one linear pair. All are checked as above. We also confirm the limit of separation of the line vortices below which mutual attraction, followed by annihilation, prevents the Feynman metamorphosis. Other possible modes of behaviour are illustrated.

Development of non-linear TWB parts

Energy Technology Data Exchange (ETDEWEB)

Lee, J.; Yoon, C.S.; Lim, J.D. [Hyundai Motor Company and Kia Motors Corp. (Korea). Advanced Technology Center; Park, H.C. [Hyundai Hysco (Korea). Technical Research Lab.

2005-07-01

New manufacturing methods have applied for automotive parts to reduce total weight of car, resulting in improvement of fuel efficiency. TWB technique is applied to auto body parts, especially door inner, side inner and outer panel, and center floor panel to accomplish this goal. We applied non-linear (circular welded) TWB to shock absorber housing (to reduce total weight of shock absorber housing assembly). Welding line and shape of blank were determined by FEM analysis. High formability steel sheet and 440MPa grade high strength steel sheet were laser welded and press formed to final shock absorber housing (S/ABS HSG) panel and assembled with other sub parts. As a result, more than 10% of total weight of shock absorber housing assembly could be reduced compared with the mass of same part manufactured by conventional method. Also circular welding technique made it possible to design optimum welding line of TWB part. This paper is about result of FEM analysis and development procedure of non-linear TWB part (shock absorber housing assembly). (orig.)

Photoinduced Circular Anisotropy in Side-Chain Azobenzene Polyesters

DEFF Research Database (Denmark)

Nikolova, L.; Todorov, T.; Ivanov, M.

1997-01-01

We report for the first time the inducing of large circular anisotropy in previously unoriented films of side-chain azobenzene polyesters on illumination with circularly polarized light at a wavelength of 488 nm. The circular dichroism and optical activity are measured simultaneously in real time...

A computational protocol for the study of circularly polarized phosphorescence and circular dichroism in spin-forbidden absorption

DEFF Research Database (Denmark)

Kaminski, Maciej; Cukras, Janusz; Pecul, Magdalena

2015-01-01

We present a computational methodology to calculate the intensity of circular dichroism (CD) in spinforbidden absorption and of circularly polarized phosphorescence (CPP) signals, a manifestation of the optical activity of the triplet–singlet transitions in chiral compounds. The protocol is based...

Self-complementary circular codes in coding theory.

Science.gov (United States)

Fimmel, Elena; Michel, Christian J; Starman, Martin; Strüngmann, Lutz

2018-04-01

Self-complementary circular codes are involved in pairing genetic processes. A maximal [Formula: see text] self-complementary circular code X of trinucleotides was identified in genes of bacteria, archaea, eukaryotes, plasmids and viruses (Michel in Life 7(20):1-16 2017, J Theor Biol 380:156-177, 2015; Arquès and Michel in J Theor Biol 182:45-58 1996). In this paper, self-complementary circular codes are investigated using the graph theory approach recently formulated in Fimmel et al. (Philos Trans R Soc A 374:20150058, 2016). A directed graph [Formula: see text] associated with any code X mirrors the properties of the code. In the present paper, we demonstrate a necessary condition for the self-complementarity of an arbitrary code X in terms of the graph theory. The same condition has been proven to be sufficient for codes which are circular and of large size [Formula: see text] trinucleotides, in particular for maximal circular codes ([Formula: see text] trinucleotides). For codes of small-size [Formula: see text] trinucleotides, some very rare counterexamples have been constructed. Furthermore, the length and the structure of the longest paths in the graphs associated with the self-complementary circular codes are investigated. It has been proven that the longest paths in such graphs determine the reading frame for the self-complementary circular codes. By applying this result, the reading frame in any arbitrary sequence of trinucleotides is retrieved after at most 15 nucleotides, i.e., 5 consecutive trinucleotides, from the circular code X identified in genes. Thus, an X motif of a length of at least 15 nucleotides in an arbitrary sequence of trinucleotides (not necessarily all of them belonging to X) uniquely defines the reading (correct) frame, an important criterion for analyzing the X motifs in genes in the future.

A product design framework for a circular economy

NARCIS (Netherlands)

Van den Berg, M.R.; Bakker, C.A.

2015-01-01

The paper provides a circular economy framework from a product design perspective with tools to aid product designers in applying circular product design in practice. Design research for circular economy has so far mainly been limited to referring to existing fields of research such as design for

Alterações morfométricas da musculatura dos músculos longitudinal e circular de ratos submetidos à criação de piloros no intestino delgado

Directory of Open Access Journals (Sweden)

Cícero de Lima Rena

Full Text Available OBJETIVO: Realizar um estudo morfométrico comparativo da musculatura longitudinal e circular do intestino delgado de ratos submetidos à construção cirúrgica de um e de dois piloros no intestino delgado utilizando-se da técnica de criação de piloros proposta por Rena et al. MÉTODO: Foram utilizados 52 ratos Wistar machos divididos em três grupos. O Grupo A, destacado como controle, composto de 10 animas, cada um forneceu 20mm de segmento de intestino para o estudo. Os animais do Grupo B, composto de 32 animais, foram submetidos à construção de dois piloros, um a 100mm e outro a 150mm da válvula ileocecal e os animais do grupo C, composto de 10 animais, foram submetidos à construção de um piloro a 100mm da mesma. A eutanásia ocorreu no décimo dia. A morfometria das camadas musculares longitudinal e circular acima e abaixo dos piloros foi estudada com utilização do microscópico modelo "Axiostar plus" conectado à câmera "Axioncam Version 5.05.10" com objetiva X5 / 0,12 no o programa "AxioVision 3.1.2.1". RESULTADOS: As alças apresentaram aumento da espessura da camada muscular acima e abaixo do ponto da operação. O estudo morfométrico comparativo das camadas musculares longitudinal e circular mostrou aumento significativo em comparação ao controle, não demonstrando significância entre os grupos B e C. CONCLUSÃO: Os resultados deste estudo revelaram importante aumento de espessura das camadas musculares, porém, menos acentuados que aqueles descritos na literatura quando foram realizados em animais submetidos à estenose fixa. Esses dados indicam que a construção operatória de piloros pela técnica utilizada promove alterações musculares de menor monta, possivelmente, pela função valvular do piloro.

Zernike vs. Bessel circular functions in visual optics.

Science.gov (United States)

Trevino, Juan P; Gómez-Correa, Jesus E; Iskander, D Robert; Chávez-Cerda, Sabino

2013-07-01

We propose the Bessel Circular Functions as alternatives of the Zernike Circle Polynomials to represent relevant circular ophthalmic surfaces. We assess the fitting capabilities of the orthogonal Bessel Circular Functions by comparing them to Zernike Circle Polynomials for approximating a variety of computationally generated surfaces which can represent ophthalmic surfaces. The Bessel Circular Functions showed better modelling capabilities for surfaces with abrupt variations such as the anterior eye surface at the limbus region, and influence functions. From our studies we find that the Bessel Circular Functions can be more suitable for studying particular features of post surgical corneal surfaces. We show that given their boundary conditions and free oscillating properties, the Bessel Circular Functions are an alternative for representing specific wavefronts and can be better than the Zernike Circle Polynomials for some important cases of corneal surfaces, influence functions and the complete anterior corneal surface. © 2013 The Authors Ophthalmic & Physiological Optics © 2013 The College of Optometrists.

Information circulars

International Nuclear Information System (INIS)

1989-04-01

The document summarizes the Information Circulars published by the IAEA under the symbol INFCIRC/ for the purpose of bringing matters of general interest to the attention of all Members of the Agency. A complete list of INFCIRCs in numerical order with their titles is given in the Annex

31 CFR Appendix to Part 321 - Appendix to Department of the Treasury Circular No. 750, Fourth Revision

Science.gov (United States)

2010-07-01

... January 1, 2003, or earlier, presented no earlier than six months from their issue dates; (2) Series EE... date of presentation, the total number of pieces transmitted, the value of each of the bundles in the...

Photoexcitation circular dichroism in chiral molecules

Science.gov (United States)

Beaulieu, S.; Comby, A.; Descamps, D.; Fabre, B.; Garcia, G. A.; Géneaux, R.; Harvey, A. G.; Légaré, F.; Mašín, Z.; Nahon, L.; Ordonez, A. F.; Petit, S.; Pons, B.; Mairesse, Y.; Smirnova, O.; Blanchet, V.

2018-05-01

Chiral effects appear in a wide variety of natural phenomena and are of fundamental importance in science, from particle physics to metamaterials. The standard technique of chiral discrimination—photoabsorption circular dichroism—relies on the magnetic properties of a chiral medium and yields an extremely weak chiral response. Here, we propose and demonstrate an orders of magnitude more sensitive type of circular dichroism in neutral molecules: photoexcitation circular dichroism. This technique does not rely on weak magnetic effects, but takes advantage of the coherent helical motion of bound electrons excited by ultrashort circularly polarized light. It results in an ultrafast chiral response and the efficient excitation of a macroscopic chiral density in an initially isotropic ensemble of randomly oriented chiral molecules. We probe this excitation using linearly polarized laser pulses, without the aid of further chiral interactions. Our time-resolved study of vibronic chiral dynamics opens a way to the efficient initiation, control and monitoring of chiral chemical change in neutral molecules at the level of electrons.

Equatorial circular orbits in the Kerr-de Sitter spacetimes

International Nuclear Information System (INIS)

Stuchlik, Zdenek; Slany, Petr

2004-01-01

Equatorial motion of test particles in Kerr-de Sitter spacetimes is considered. Circular orbits are determined, their properties are discussed for both black-hole and naked-singularity spacetimes, and their relevance for thin accretion disks is established. The circular orbits constitute two families that coalesce at the so-called static radius. The orientation of the motion along the circular orbits is, in accordance with case of asymptotically flat Kerr spacetimes, defined by relating the motion to the locally nonrotating frames. The minus-family orbits are all counterrotating, while the plus-family orbits are usually corotating relative to these frames. However, the plus-family orbits become counterrotating in the vicinity of the static radius in all Kerr-de Sitter spacetimes, and they become counterrotating in the vicinity of the ring singularity in Kerr-de Sitter naked-singularity spacetimes with a low enough rotational parameter. In such spacetimes, the efficiency of the conversion of the rest energy into heat energy in the geometrically thin plus-family accretion disks can reach extremely high values exceeding the efficiency of the annihilation process. The transformation of a Kerr-de Sitter naked singularity into an extreme black hole due to accretion in the thin disks is briefly discussed for both the plus-family and minus-family disks. It is shown that such a conversion leads to an abrupt instability of the innermost parts of the plus-family accretion disks that can have strong observational consequences

Distribución de tensiones tangenciales en vigas de sección constante bajo esfuerzos cortantes

OpenAIRE

Fernández, T.; Viaño, J.; Samartín, A.

2000-01-01

En este trabajo se analizan algunos resultados obtenidos por Trabucho y Viaño, mediante desarrollos asintótico de las ecuaciones de la elasticidad tridimensional en vigas de sección constante, para la distribución de tensiones tangenciales en una sección transversal bajo la acción de un esfuerzo cortante. Se aplican, con carácter ilustrativo, a vigas con distintos tipos de secciones transversales (rectangular, circular, triangular y perfil UPN) comparando los resultados con los qu...

Beamforming with a circular array of microphones mounted on a rigid sphere (L)

DEFF Research Database (Denmark)

Tiana Roig, Elisabet; Jacobsen, Finn; Fernandez Grande, Efren

2011-01-01

Beamforming with uniform circular microphone arrays can be used for localizing sound sources over 360. Typically, the array microphones are suspended in free space or they are mounted on a solid cylinder. However, the cylinder is often considered to be infinitely long because the scattering problem...... has no exact solution for a finite cylinder. Alternatively one can use a solid sphere. This investigation compares the performance of a circular array mounded on a rigid sphere with that of such an array in free space and mounted on an infinite cylinder, using computer simulations. The examined...

NUMERICAL MODELING OF STRESSES NEAR THE SURFACE IN THE INGOT OF CIRCULAR SECTION, CRYSTALLIZABLE AT CIRCULAR TORCH SECONDARY COOLING

Directory of Open Access Journals (Sweden)

A. N. Chichko

2004-01-01

Full Text Available The results of computer calculations of the stresses, generated in outside layer of ingot of steel 20 of circular section with diameter 300 mm, in application to one of the industrial technological schemas of RUP “BMZ”, are presented. The segments of compressive and tensile stresses formation along the length of ingot are determined and the principal possibility of production of continuously cast slug of circular section at circular-torch spray cooling is shown.

Expulsion of swimming bacteria by a circular flow

Science.gov (United States)

Sokolov, Andrey; Aronson, Igor

Macroscopic shear flow alters swimming trajectories in a highly nontrivial way and results in dramatic reduction of viscosity and heterogeneous bacterial distributions. We report on experimental and theoretical studies of rapid expulsion of microswimmers, such as motile bacteria, by a circular flow created by a rotating microparticle. We observed a formation of a macroscopic depletion area in a high-shear region, in the vicinity of a microparticle. The rapid migration of bacteria from the shear-rich area is caused by a circular structure of the flow rather than intrinsic random fluctuations of bacteria orientations, in stark contrast to planar shear flow. Our mathematical model revealed that expulsion is a combined effect of motility and alignment by a vortical flow. Our findings offer a novel approach for manipulation of motile microorganisms and shed new light on bacteria-flow interactions. Was supported by the US DOE, Office of Basic Energy Sciences, Division of Materials Science And Engineering, under Contract No. DE AC02-06CH11357.

Magnetic circular dichroism studies on microsomal aryl hydrocarbon hydroxylase: comparison with cytochrome b/sub 5/ and cytochrome P-450/sub cam/

Energy Technology Data Exchange (ETDEWEB)

Vickery, L; Salmon, A; Sauer, K

1975-01-01

Magnetic circular dichroism spectra are reported for the visible and near ultraviolet spectral regions of liver microsomes from dimethylbenzanthracene-treated rats. The sequential addition of NADH, dithionite, and carbon monoxide enables us to determine contributions to the magnetic circular dichroism by cytochromes b/sub 5/ and P-450, which dominate the spectra. The magnetic circular dichroism of the microsomal preparation is compared with that of purified oxidized and reduced cytochrome b/sub 5/ from pig liver and with the camphor-complexed and camphor-free oxidized, reduced, and reduced carbonmonoxy cytochrome P-450/sub cam/ from Pseudomonas putida. The magnetic circular dichroism spectra of the membrane bound cytochrome b/sub 5/ are similar to those of the purified protein, indicating that little or no alteration in the environment of the heme occurs during the isolation procedure. The soluble bacterial cytochrome P-450/sub cam/ also appears to be a suitable model for microsomal P-450, although differences in the magnetic circular dichroism intensity are observed for the two enzymes. No effect of dimethylbenzanthracene on the magnetic circular dichroism spectra of induced compared to control rat microsomes could be observed.

Experimental hydraulic analysis in conduction tunnels at the trunk section working as a channel considering compound roughness; Analisis hidraulico experimental en tuneles de conduccion en seccion baul trabajando como canal, considerando rugosidades compuestas

Energy Technology Data Exchange (ETDEWEB)

Marengo-Mogollon, Humberto; Cortes-Cortes, Carlos [Comision Federal de Electricidad (Mexico); Arreguin-Cortes, Felipe I [Comision Nacional del Agua (Mexico)

2008-01-15

This paper presents the roughness coefficients of a conduction tunnel at the trunk section working as a channel obtained experimentally using a hydraulic model of the diversion tunnel of the Hydroelectric Project called El Cajon (Mexico). A comparative analysis between experimental and theoretical coefficients obtained in the literature is shown. [Spanish] Se presentan los coeficientes de rugosidad compuesta de un tunel de conduccion en seccion baul trabajando como canal obtenidos en forma experimental en un modelo hidraulico del tunel de desvio del Proyecto Hidroelectrico El Cajon (Mexico). Se muestra un analisis comparativo entre los coeficientes experimentales y los teoricos obtenidos en la literatura.

The Baltics on Their Way towards a Circular Economy

Directory of Open Access Journals (Sweden)

Grigoryan A. A.

2017-10-01

Full Text Available Circular economy has been studied extensively both in Europe and worldwide. It is largely viewed as a potential strategy for societal development, aimed to increase prosperity while reducing dependence on raw materials and energy. Many businesses regard circular economy as a way to enhance economic growth and increase profits. Governments across the world actively engage in the discussion about the benefits of a transition to a circular economy and about its impact on employment, economic growth, and the environment. This paper aims to study the major issues of circular economy, to identify its advantages, and to offer an insight into the transition stage the Baltic States are undergoing today on their way to circular economy. It is stressed that the Baltic countries are not fully using the opportunities offered by a circular economy. For example, Latvia’s, Lithuania’s, and Estonia’s recycling rates are significantly below those of other European countries. The Baltics depend heavily on EU financial support. An increase in funding will contribute to the implementation of circular economy technologies.

Administrative circular n°3 (Rev. 2) – Home leave, travel to home station and assimilated leave and travel

CERN Multimedia

2013-01-01

Administrative Circular No. 3 (Rev. 2) entitled “Home leave, travel to the home station and assimilated leave and travel”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 11 October 2012 and entering into force on 1 January 2013, is available on the intranet site of the Human Resources Department.   This circular is applicable to employed members of the personnel. It cancels and replaces Administrative Circular No. 3 (Rev. 1) entitled “Travel to the home station and home leave” of June 2002. The circular was revised in order to take into account the new status of Associate Member State and the fact that henceforth, home stations may be situated on territory outside of Europe. It is proposed to introduce a new system of determination of the benefits (Travel expenses, travel time and distance indemnity) granted in the context of home leave and supplementary journeys to the home station.  For t...

Limit moments for non circular cross-section (elliptical) pipe bends

International Nuclear Information System (INIS)

Spence, J.

1977-01-01

A number of experiment studies have been reported or are underway which investigate limit moments applied to pipe bends. Some theoretical work is also available. However, most of the work has been confined to nominally circular cross-section bends and little account has been taken of the practical problem of manufacturing tolerances. Many methods of manufacture result in bends which are not circular in cross-section but have an oval or elliptical shape. The present paper extends previous analyses on circular bends to cater for initially elliptical cross-sections. The loading is primarily in plane bending but out of plane is also considered and several independent methods are presented. No previous information is known to the authors. Upper and lower bound limit moments are derived first of all from existing linear elastic analyses and secondly upper bound moments are derived via a plastic analogy from existing stationary creep results. It is also shown that the creep information on design factors for bends can be used to obtain a reasonable estimate of the complete moment/strain behaviour of a bend or indeed a system. (Auth.)

University Students Alternative Conceptions On Circular Motion

Directory of Open Access Journals (Sweden)

Ian Phil Canlas

2015-08-01

Full Text Available This study attempted to find out university students alternative conceptions on circular motion. An 18-item researcher-compiled and content-validated questionnaire was administered to twenty-six 26 students taking up a program in Bachelor in Secondary Education-Physical Science in their second year enrolled in a course on mechanics. Results revealed that majority of the students possess alternative conceptions on circular motion specifically along velocity acceleration and force. Moreover results showed the inconsistencies in the students understanding of circular motion concepts.

Architectural Surfaces and Structures from Circular Arcs

KAUST Repository

Shi, Ling

2013-01-01

the most attention from geometry researchers. In this thesis, we aim to realize this process with simple geometric primitives, circular arcs. We investigate architectural surfaces and structures consisting of circular arcs. Our focus is lying on how

Ministry of Health Circular No. 36 on the physical requirements for marine waters intended for mollusc culture (Section 12 of Act No. 192 of 2 May 1977 and Section 5 of Ministerial Decree of 27 April 1978)

International Nuclear Information System (INIS)

1979-01-01

This Circular by the Minister of Health follows up a Ministerial Decree of 27 April 1978 made in implementation of the 1977 Act on health protection standards for the production of and trade in molluscs. It fixes the microbiological, biological, chemical and physical quality requirements for waters intended for molluscs culture and production. These include radionuclide concentrations which must not exceed the limits laid down by Presidential Decree No. 185 of 13 February 1964 on radiation protection. (NEA) [fr

CURVAS PARALELAS EXPLÍCITAS DE LAS CURVAS CÓNICAS NO DEGENERADAS PARA EL TORNEADO CNC DE LENTES Y ESPEJOS ASFÉRICO-CÓNICOS EXPLICIT PARALLEL CURVES OF NON-DEGENERATE CONIC CURVES FOR THE TURNED CNC OF ASPHERIC-CONIC LENSES AND MIRORS

Directory of Open Access Journals (Sweden)

Juan Camilo Valencia

2008-12-01

Full Text Available Este artículo presenta el método para obtener, en coordenadas cartesianas, las líneas curvas paralelas de las curvas cónicas no degeneradas, por métodos analíticos y numéricos. Se define el offset como una función paralela a la función original a una distancia r. El offset de una cónica es importante para los procesos de fabricación de mecanismos, lentes, espejos y moldes; especialmente en el torneado con control numérico computarizado (CNC de superficies de revolución con secciones cónicas, usando buriles de diamante con punta de radio r. También se presenta una técnica refinada usando interpolación circular segmentaria para construir numéricamente el offset de una parábola, que también puede usarse como modelo para determinar el offset de la elipse y de la hipérbola.This paper presents the method to obtain, in Cartesian coordinates, the parallel curve lines of non-degenerate conical curves, by analytical and numerical methods. Offset is defined as parallel function to the original function to a distance r. Offset of a conic is important for the manufacturing processes of mechanisms, lenses, mirrors, and molds; especially in the turning with computerized numerical control (CNC of surfaces of revolution with conical sections, using diamond tools of radio r. Also a refined tip technique using segmental circular interpolation to numerically construct the parabola offset is presented, that also can be used as model to determine offsets of ellipse and hyperbola.

Environmental issues elimination through circular economy

Energy Technology Data Exchange (ETDEWEB)

Špirková, M., E-mail: marta.spirkova@stuba.sk; Pokorná, E.; Šujanová, J.; Samáková, J. [Paulínska 16, 917 24 Trnava, Slovakia, Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava (Slovakia)

2016-04-21

Environmental efforts of European Union are currently going towards circular economy. Tools like Extended Producer Responsibility and Eco-design were established. The circular economy deals with resources availability issue on one hand and waste management on the other hand. There are few pioneering companies all over the world with some kind of circular economy practice. Generally the concept is not very wide-spread. The paper aims to evaluate possibility of transition towards circular economy in Slovak industrial companies. They need to have an active approach to material treatment of their products after usage stage. Innovation is another important pre-condition for the transition. Main problem of current cradle to grave system is landfilling of valuable materials after one cycle of usage. Their potential value for next manufacturing cycles is lost. Companies may do not see connection between waste management and material resource prices and volatility of supplies. Municipalities are responsible for municipal waste collection and treatment in Slovakia. The circular economy operates by cradle to cradle principle. Company manages material flow until the material comes back to the beginning of manufacturing process by itself or by another partners. Stable material supplies with quite low costs are provided this way. It is necessary to deal with environmental problems in phase of product design. Questionnaire survey results show on one hand low involvement of industrial companies in waste management area, however on the other hand they are open to environmental innovations in future.

Environmental issues elimination through circular economy

International Nuclear Information System (INIS)

Špirková, M.; Pokorná, E.; Šujanová, J.; Samáková, J.

2016-01-01

Environmental efforts of European Union are currently going towards circular economy. Tools like Extended Producer Responsibility and Eco-design were established. The circular economy deals with resources availability issue on one hand and waste management on the other hand. There are few pioneering companies all over the world with some kind of circular economy practice. Generally the concept is not very wide-spread. The paper aims to evaluate possibility of transition towards circular economy in Slovak industrial companies. They need to have an active approach to material treatment of their products after usage stage. Innovation is another important pre-condition for the transition. Main problem of current cradle to grave system is landfilling of valuable materials after one cycle of usage. Their potential value for next manufacturing cycles is lost. Companies may do not see connection between waste management and material resource prices and volatility of supplies. Municipalities are responsible for municipal waste collection and treatment in Slovakia. The circular economy operates by cradle to cradle principle. Company manages material flow until the material comes back to the beginning of manufacturing process by itself or by another partners. Stable material supplies with quite low costs are provided this way. It is necessary to deal with environmental problems in phase of product design. Questionnaire survey results show on one hand low involvement of industrial companies in waste management area, however on the other hand they are open to environmental innovations in future.

Environmental issues elimination through circular economy

Science.gov (United States)

Špirková, M.; Pokorná, E.; Šujanová, J.; Samáková, J.

2016-04-01

Environmental efforts of European Union are currently going towards circular economy. Tools like Extended Producer Responsibility and Eco-design were established. The circular economy deals with resources availability issue on one hand and waste management on the other hand. There are few pioneering companies all over the world with some kind of circular economy practice. Generally the concept is not very wide-spread. The paper aims to evaluate possibility of transition towards circular economy in Slovak industrial companies. They need to have an active approach to material treatment of their products after usage stage. Innovation is another important pre-condition for the transition. Main problem of current cradle to grave system is landfilling of valuable materials after one cycle of usage. Their potential value for next manufacturing cycles is lost. Companies may do not see connection between waste management and material resource prices and volatility of supplies. Municipalities are responsible for municipal waste collection and treatment in Slovakia. The circular economy operates by cradle to cradle principle. Company manages material flow until the material comes back to the beginning of manufacturing process by itself or by another partners. Stable material supplies with quite low costs are provided this way. It is necessary to deal with environmental problems in phase of product design. Questionnaire survey results show on one hand low involvement of industrial companies in waste management area, however on the other hand they are open to environmental innovations in future.

The Circular Economy between Desiderates and Realities.

Directory of Open Access Journals (Sweden)

Tăchiciu Laurentiu

2018-05-01

Full Text Available The present issue of Amfiteatru Economic Journal addresses the subject of the circular economy, bringing together research contributions to a better understanding of the current state and perspectives of the adoption of economic and business models conceived to give resources’ highest utility and value in every stage by reducing waste, reusing and recycling. Contributors are approaching the circular economy from different perspectives. Some are concerned with the macroeconomic and social conditions accompanying a higher circularity in the economy, while others focus on businesses’ and individuals’ behaviours.

The Circular Economy: In Practice-focused Undergraduate Engineering Education

DEFF Research Database (Denmark)

Knudby, Torben; Larsen, Samuel

2017-01-01

The growth of the planet’s population makes the traditional industrial model of “take, make and waste” unsustainable. The circular economy, in which resources are continuously reused, offers a solution. For manufacturers of durable goods the circular economy requires a well-functioning circular...

Flow-induced vibration of circular cylindrical structures

International Nuclear Information System (INIS)

Chen, S.S.

1985-06-01

This report summarizes the flow-induced vibration of circular cylinders in quiescent fluid, axial flow, and crossflow, and applications of the analytical methods and experimental data in design evaluation of various system components consisting of circular cylinders. 219 figs., 30 tabs

Eco-Innovation in Circular Agri-Business

Directory of Open Access Journals (Sweden)

Dong-Her Shih

2018-04-01

Full Text Available This study constructs a theory of eco-innovation in circular agri-business. Although previous studies have discussed eco-innovation in circular agri-business, they did not address eco-innovation from the perspective of a closed-loop sustainable supply chain. Hence, this study applied the fuzzy TOPSIS method to conduct the analysis and determine the interrelationship between eco-innovation and the closed-loop concept. The results are consistent with the theory and a significant improvement in terms of the decisive attributes. The findings suggest that improving water management, relationships with suppliers, knowledge sharing, environmental management systems, and new product and service development are the most effective and efficient ways to build eco-innovation in circular agri-business. The managerial and theoretical implications are discussed.

Optics modules for circular accelerator design

International Nuclear Information System (INIS)

Brown, K.L.; Servranckx, R.V.

1986-05-01

The first-order differential equations of motion for a single particle in a closed circular machine are solved, introducing the concepts of phase shift, beta functions, and the Courant-Snyder invariant. The transfer matrix between two points in the machine is derived as a function of the phase shift and the parameters contained in the Courant-Snyder invariant. Typical optical modules used in circular machine designs are introduced and related to their characteristic transfer matrix elements, the phase shift through them, and the Courant-Snyder-Twiss parameters. The systematics of some elementary phase ellipse matching problems between optical modules are discussed. Second-order optical modules are discussed, including how they are used to provide the momentum bandwidth needed for the design of a typical circular machine

Equatorial circular motion in Kerr spacetime

International Nuclear Information System (INIS)

Pugliese, Daniela; Quevedo, Hernando; Ruffini, Remo

2011-01-01

We analyze the properties of circular orbits of test particles on the equatorial plane of a rotating central mass whose gravitational field is described by the Kerr spacetime. For rotating black holes and naked singularities we explore all the spatial regions where circular orbits can exist and analyze the behavior of the energy and the angular momentum of the corresponding test particles. In particular, we find all the radii at which a test particle can have zero angular momentum due to the repulsive gravity effects generated by naked singularities. We classify all the stability zones of circular orbits. It is shown that the geometric structure of the stability zones of black holes is completely different from that of naked singularities.

Characteristics of a Circular Logic and Its Treatment

International Nuclear Information System (INIS)

Lim, Ho-Gon; Han, Sang-Hoon; Yang, Joon Eon

2007-01-01

A circular logic or a logical loop is defined as the infinite circulation of supporting relations due to their mutual dependencies among the systems in the Fault Tree Analysis (FTA). While many methods to break the circular logic have been developed and used in the fault tree quantification codes, the general solution for a circular logic and its breaking methods are not generally known as yet. This paper presents an analytic solution for circular logics in which the systems are linearly interrelated with each other. Then, a general treatment of circular logics is discussed. To formulate the analytic solution, the relations among systems in the fault tree structure are described by the Boolean equations. The solution is, then, obtained from the successive substitutions of the Boolean equations, which is equivalent to the attaching processes of interrelated system's fault tree to a given fault tree. The solution for three interrelated systems and their independent fault tree structures are given as an example

Circular polarization opportunities at the SASE3 undulator line of the European XFEL

Energy Technology Data Exchange (ETDEWEB)

Serkez, Svitozar; Geloni, Gianluca [European XFEL GmbH, Hamburg (Germany); Kocharyan, Vitali; Saldin, Evgeni [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2016-08-15

XFELs provide X-ray pulses with unprecedented peak brightness and ultrashort duration. They are usually driven by planar undulators, meaning that the output radiation is linearly polarized. For many experimental applications, however, polarization control is critical: besides the ability to produce linearly polarized radiation, one often needs the possibility of generating circularly polarized radiation with a high, stable degree of polarization. This may be achieved by using a first part of the XFEL undulator to produce bunching and then, by propagating the the bunched beam through an ''afterburner'' - a short undulator with tunable polarization, where only limited gain takes place. One of the issues that one needs to consider in this case is the separation of the circularly polarized radiation obtained in the radiator from the linearly polarized background produced in the first part of the FEL. In this article we review several methods to do so, including the inverse tapering technique. In particular, we use the Genesis FEL code to simulate a case study pertaining to the SASE3 FEL line at the European XFEL with up-to-date parameters and we confirm that a high degree of circular polarization is expected. Moreover, we propose to further improve the effectiveness of the inverse tapering technique either via angular separation of the linearly polarized radiation or strongly defocusing it at the sample position. In this way we exploit the unique flexibility of the European XFEL from both the electron beam and the photon beam optics side.

The circular economy applied to local communities

NARCIS (Netherlands)

van der Blonk, Heico; van Spijk, Alex; van der Schoor, Tineke

2015-01-01

Based on a theoretical discussion the main difference between models of lineair economy and circular economy are elaborated; (1) Elimination of waste is essential the circulation of circular flows and reclamation of (raw) materials; this requires mechanisms for the return of obsolete materials. (2)

Quantum wave-packet revivals in circular billiards

International Nuclear Information System (INIS)

Robinett, R.W.; Heppelmann, S.

2002-01-01

We examine the long-term time dependence of Gaussian wave packets in a circular infinite well (billiard) system and find that there are approximate revivals. For the special case of purely m=0 states (central wave packets with no momentum) the revival time is T rev (m=0) =8μR 2 /(ℎ/2π)π, where μ is the mass of the particle, and the revivals are almost exact. For all other wave packets, we find that T rev (m≠0) =(π 2 /2)T rev (m=0) ≅5T rev (m=0) and the nature of the revivals becomes increasingly approximate as the average angular momentum or number of m≠0 states is increased. The dependence of the revival structure on the initial position, energy, and angular momentum of the wave packet and the connection to the energy spectrum is discussed in detail. The results are also compared to two other highly symmetrical two-dimensional infinite well geometries with exact revivals, namely, the square and equilateral triangle billiards. We also show explicitly how the classical periodicity for closed orbits in a circular billiard arises from the energy eigenvalue spectrum, using a WKB analysis

Culture as a Caveat Towards Circular Economy

DEFF Research Database (Denmark)

Guerrieri, Valeria

2015-01-01

Circular economy represents an economic and political challenge, as well as a cultural one, requiring a massive transformation on all levels of society. But why is cultural change so important to understanding today’s economy and how can the circular model be considered a truly cross-cultural...

Primal-dual path-following algorithms for circular programming

Directory of Open Access Journals (Sweden)

Baha Alzalg

2017-06-01

Full Text Available Circular programming problems are a new class of convex optimization problems that include second-order cone programming problems as a special case‎. ‎Alizadeh and Goldfarb [Math‎. ‎Program‎. ‎Ser‎. ‎A 95 (2003 3--51] introduced primal-dual path-following algorithms for solving second-order cone programming problems‎. ‎In this paper‎, ‎we generalize their work by using the machinery of Euclidean Jordan algebras associated with the circular cones to derive primal-dual path-following interior point algorithms for circular programming problems‎. ‎We prove polynomial convergence of the proposed algorithms by showing that the circular logarithmic barrier is a strongly self-concordant barrier‎. ‎The numerical examples show the path-following algorithms are simple and efficient‎.

A new neolithic circular enclosure in Central Germany

Science.gov (United States)

Kretzer, Olaf

2015-08-01

Today we know about 130 neolithic enclosures in Central Europe. About 20 of them are located in Germany. In the last years, there was a great discussion about the function of the openings: Are the openings aligned with points of the solstices? Or are the openings aligned with points of rising stars?Four years ago, a new neolithic circular enclosure was found in the northern part of Thuringia. With a diameter of about 50 meters it was not so large but it was the first evidence of a neolithic culture in Thuringia: the central part of Germany!7000 years ago, people with unknown identity built up three rings with three or four openings.With the help of various measurements we were able to determine in which directions the openings were aligned. We found a link between these directions and very interesting landmarks - an amazing connection between sky and landscape.

Research on the development and countermeasures for circular economy

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

Ecological economics and sustainable development economics are the basic theories to research on circular economy. Through the systemically research on the relationship of the three above, this paper thinks that the reuse and recycle of circular economy ts a way that the stall is mended after a sheep is lost. Although the reduction technically controls the production process, it cannot solve the waste caused by blind production and excess competition. We have experienced variety obstacles when implementing the circular economy, whose main reason ts the conflict between the individual ration and the social ration. Therefore, only when the individual ration and social ration incline to conformity,the cooperating Nash equilibrium will be appeared. In order to realize the harmony of ecology, economy and society, we have to explore effective evaluation theory. This paper cites the "five flows of wealth operation theory"from professor Ma Chuandong to search operation mechanism of circular economy, makes clear the developing thoughts of circular economy based on the realities, and brings forward some countermeasures to develop circular economy based on the above theoretical analysis.

Circular economy and nuclear energy

International Nuclear Information System (INIS)

2016-01-01

Circular economy means no production of waste through re-using and recycling. As other industries, nuclear industry has committed itself to a policy of sustainability and resource preservation. EDF has developed a 5 point strategy: 1) the closure of the fuel cycle through recycling, 2) operating nuclear power plants beyond 40 years, 3) reducing the volume of waste, 4) diminishing the consumption of energy through the implementation of new processes (for instance the enrichment through centrifugation uses 50 times less power than gaseous diffusion enrichment) and 5) making evolve the prevailing doctrine concerning the management of very low level radioactive waste: making possible the re-use of slightly contaminated steel scrap or concrete instead of storing them in dedicated disposal centers. (A.C.)

Nuclear spin circular dichroism

International Nuclear Information System (INIS)

Vaara, Juha; Rizzo, Antonio; Kauczor, Joanna; Norman, Patrick; Coriani, Sonia

2014-01-01

Recent years have witnessed a growing interest in magneto-optic spectroscopy techniques that use nuclear magnetization as the source of the magnetic field. Here we present a formulation of magnetic circular dichroism (CD) due to magnetically polarized nuclei, nuclear spin-induced CD (NSCD), in molecules. The NSCD ellipticity and nuclear spin-induced optical rotation (NSOR) angle correspond to the real and imaginary parts, respectively, of (complex) quadratic response functions involving the dynamic second-order interaction of the electron system with the linearly polarized light beam, as well as the static magnetic hyperfine interaction. Using the complex polarization propagator framework, NSCD and NSOR signals are obtained at frequencies in the vicinity of optical excitations. Hartree-Fock and density-functional theory calculations on relatively small model systems, ethene, benzene, and 1,4-benzoquinone, demonstrate the feasibility of the method for obtaining relatively strong nuclear spin-induced ellipticity and optical rotation signals. Comparison of the proton and carbon-13 signals of ethanol reveals that these resonant phenomena facilitate chemical resolution between non-equivalent nuclei in magneto-optic spectra

High Reynolds number oscillations of a circular cylinder

OpenAIRE

Hirata, Miguel H.; Pereira, Luiz Antonio A.; Recicar, Jan N.; Moura, Washington H. de

2008-01-01

This paper concerns the numerical simulation of the flow around an oscillating circular cylinder, which moves with constant velocity in a quiescent Newtonian fluid with constant properties. For each time step of the simulation a number of discrete Lamb vortices is placed close to the body surface; the intensity of each of these is determined such as to satisfy the no-slip boundary condition. The aerodynamic loads acting on the surface of cylinder are computed using the integral formulation de...

Circular Bioassay Platforms for Applications in Microwave-Accelerated Techniques.

Science.gov (United States)

Mohammed, Muzaffer; Clement, Travis C; Aslan, Kadir

2014-12-02

In this paper, we present the design of four different circular bioassay platforms, which are suitable for homogeneous microwave heating, using theoretical calculations (i.e., COMSOL™ multiphysics software). Circular bioassay platforms are constructed from poly(methyl methacrylate) (PMMA) for optical transparency between 400-800 nm, has multiple sample capacity (12, 16, 19 and 21 wells) and modified with silver nanoparticle films (SNFs) to be used in microwave-accelerated bioassays (MABs). In addition, a small monomode microwave cavity, which can be operated with an external microwave generator (100 W), for use with the bioassay platforms in MABs is also developed. Our design parameters for the circular bioassay platforms and monomode microwave cavity during microwave heating were: (i) temperature profiles, (ii) electric field distributions, (iii) location of the circular bioassay platforms inside the microwave cavity, and (iv) design and number of wells on the circular bioassay platforms. We have also carried out additional simulations to assess the use of circular bioassay platforms in a conventional kitchen microwave oven (e.g., 900 W). Our results show that the location of the circular bioassay platforms in the microwave cavity was predicted to have a significant effect on the homogeneous heating of these platforms. The 21-well circular bioassay platform design in our monomode microwave cavity was predicted to offer a homogeneous heating pattern, where inter-well temperature was observed to be in between 23.72-24.13°C and intra-well temperature difference was less than 0.21°C for 60 seconds of microwave heating, which was also verified experimentally.

Circular economy opportunity in the wind industry. Final report

International Nuclear Information System (INIS)

Bellini, Robert

2015-05-01

industrializing the first-generation turbines, circular economy appears as an opportunity for the next 15 years. Concerning the 'product dimension': the main challenges are to control rare earth consumption and to create a specific treatment process for composite blades, but also to maximize the use of equipment by extending the equipment lifetime or the reconditioning of critical components. The creation of maintenance / recycling activities is a major component of circular economy, which creates value and local jobs. Concerning the 'territorial dimension': as there is no French leading manufacturer, there is still a large potential to optimize supply chain, by re-localizing added value at different levels (wind turbine assembly, tower manufacturing, 2. level maintenance). This would limit transportation and enhance skills throughout the all value chain creating more sustainable industrials ecosystems. To contribute to the development of these opportunities, ADEME can pull several levers: - To conduct in-depth environmental studies to validate environmental opportunities; - To conduct strategic and economic studies to validate the impact of strategic opportunities; - To support innovation for eco-technologies in wind turbine sector; - To promote the integration of circular economy criteria in public policies; - To promote development of the opportunities. To conclude, as the French wind industry is still young and lacking of clear leader, pulling the levers of circular economy is a strategic opportunity to strengthen the French wind industry

Evaluación de programas bilingües: análisis de resultados de las secciones experimentales de francés en el marco del Plan de Fomento del Plurilingúismo de Andalucía

OpenAIRE

Pérez Invernón, María América

2013-01-01

Evaluación de programas bilingües: Análisis de resultados de las secciones experimentales de francés en el marco del Plan de Fomento del plurilingüismo de Andalucía¿ En 1999 llega la implantación de forma experimental del futuro Plan de Fomento del Plurilingüismo de Andalucía. A finales del curso 2008/09 algunos de los alumnos/as que comenzaron en aquel entonces finalizaron el recorrido formativo en esta sección junto con aquellos otros compañeros que se habían querido incorporar en distin...

High-power TM01 millimeter wave pulse sensor in circular waveguide

International Nuclear Information System (INIS)

Wang Guang-Qiang; Zhu Xiang-Qin; Chen Zai-Gao; Wang Xue-Feng; Zhang Li-Jun

2015-01-01

By investigating the interaction of an n-type silicon sample with the TM 01 mode millimeter wave in a circular waveguide, a viable high-power TM 01 millimeter wave sensor is proposed. Based on the hot electron effect, the silicon sample serving as a sensing element (SE) and appropriately mounted on the inner wall of the circular waveguide is devoted to the on-line measurement of a high-power millimeter wave pulse. A three-dimensional parallel finite-difference time-domain method is applied to simulate the wave propagation within the measuring structure. The transverse electric field distribution, the dependences of the frequency response of the voltage standing-wave ratio (VSWR) in the circular waveguide, and the average electric field amplitude within the SE on the electrophysical parameters of the SE are calculated and analyzed in the frequency range of 300–400 GHz. As a result, the optimal dimensions and specific resistance of the SE are obtained, which provide a VSWR of no more than 2.0, a relative sensitivity around 0.0046 kW −1 fluctuating within ± 17.3%, and a maximum enduring power of about 4.3 MW. (paper)

The protein circular dichroism data bank, a Web-based site for access to circular dichroism spectroscopic data.

Science.gov (United States)

Whitmore, Lee; Woollett, Benjamin; Miles, Andrew J; Janes, Robert W; Wallace, B A

2010-10-13

The Protein Circular Dichroism Data Bank (PCDDB) is a newly released resource for structural biology. It is a web-accessible (http://pcddb.cryst.bbk.ac.uk) data bank for circular dichroism (CD) and synchrotron radiation circular dichroism (SRCD) spectra and their associated experimental and secondary metadata, with links to protein sequence and structure data banks. It is designed to provide a public repository for CD spectroscopic data on macromolecules, to parallel the Protein Data Bank (PDB) for crystallographic, electron microscopic, and nuclear magnetic resonance spectroscopic data. Similarly to the PDB, it includes validation checking procedures to ensure good practice and the integrity of the deposited data. This paper reports on the first public release of the PCDDB, which provides access to spectral data that comprise standard reference datasets. Copyright © 2010 Elsevier Ltd. All rights reserved.

Codon Distribution in Error-Detecting Circular Codes

Directory of Open Access Journals (Sweden)

Elena Fimmel

2016-03-01

Full Text Available In 1957, Francis Crick et al. suggested an ingenious explanation for the process of frame maintenance. The idea was based on the notion of comma-free codes. Although Crick’s hypothesis proved to be wrong, in 1996, Arquès and Michel discovered the existence of a weaker version of such codes in eukaryote and prokaryote genomes, namely the so-called circular codes. Since then, circular code theory has invariably evoked great interest and made significant progress. In this article, the codon distributions in maximal comma-free, maximal self-complementary C3 and maximal self-complementary circular codes are discussed, i.e., we investigate in how many of such codes a given codon participates. As the main (and surprising result, it is shown that the codons can be separated into very few classes (three, or five, or six with respect to their frequency. Moreover, the distribution classes can be hierarchically ordered as refinements from maximal comma-free codes via maximal self-complementary C3 codes to maximal self-complementary circular codes.

Codon Distribution in Error-Detecting Circular Codes.

Science.gov (United States)

Fimmel, Elena; Strüngmann, Lutz

2016-03-15

In 1957, Francis Crick et al. suggested an ingenious explanation for the process of frame maintenance. The idea was based on the notion of comma-free codes. Although Crick's hypothesis proved to be wrong, in 1996, Arquès and Michel discovered the existence of a weaker version of such codes in eukaryote and prokaryote genomes, namely the so-called circular codes. Since then, circular code theory has invariably evoked great interest and made significant progress. In this article, the codon distributions in maximal comma-free, maximal self-complementary C³ and maximal self-complementary circular codes are discussed, i.e., we investigate in how many of such codes a given codon participates. As the main (and surprising) result, it is shown that the codons can be separated into very few classes (three, or five, or six) with respect to their frequency. Moreover, the distribution classes can be hierarchically ordered as refinements from maximal comma-free codes via maximal self-complementary C(3) codes to maximal self-complementary circular codes.

A novel x-ray circularly polarized ranging method

International Nuclear Information System (INIS)

Song Shi-Bin; Xu Lu-Ping; Zhang Hua; Shen Yang-He; Gao Na

2015-01-01

Range measurement has found multiple applications in deep space missions. With more and further deep space exploration activities happening now and in the future, the requirement for range measurement has risen. In view of the future ranging requirement, a novel x-ray polarized ranging method based on the circular polarization modulation is proposed, termed as x-ray circularly polarized ranging (XCPolR). XCPolR utilizes the circular polarization modulation to process x-ray signals and the ranging information is conveyed by the circular polarization states. As the circular polarization states present good stability in space propagation and x-ray detectors have light weight and low power consumption, XCPolR shows great potential in the long-distance range measurement and provides an option for future deep space ranging. In this paper, we present a detailed illustration of XCPolR. Firstly, the structure of the polarized ranging system is described and the signal models in the ranging process are established mathematically. Then, the main factors that affect the ranging accuracy, including the Doppler effect, the differential demodulation, and the correlation error, are analyzed theoretically. Finally, numerical simulation is carried out to evaluate the performance of XCPolR. (paper)

El retorno de las migraciones circulares: la regulación de las migraciones profesionales (The return of circular migration: regulation of professional migration

Directory of Open Access Journals (Sweden)

Santacreu Fernández, Óscar Antonio

2009-06-01

Full Text Available Resumen: Nuevamente, reaparece la noción de migraciones circulares como procedimiento de racionalización de las migraciones con motivación laboral. Es un concepto que produce tanto reacciones adversas como favorables entre los investigadores. Como tantos propuestas, sus virtudes y defectos dependerán más de cómo se concrete su reglamentación y aplicación práctica que de sus contenidos y potencialidades. Una parte sustantiva de las migraciones corresponde con motivaciones socioeconómicas, asociadas a la movilidad laboral. Para este tipo de migración, la ruptura con los elementos culturales, de vida cotidiana, y con las redes sociales de su país de origen son consecuencias no deseadas de la movilidad. La contribución más visible de su esfuerzo, en las sociedades de origen, son las remesas económicas. Las migraciones circulares proponen que la movilidad incorpore la noción de regreso. Es decir, que la migración suponga un momento de su ciclo vital, donde la restitución al entorno social de origen pueda ser una realidad. Incluyendo las ventajas para una nueva migración posterior. Las consecuencias de esta reestructuración en el horizonte vital de los migrados son importantes. Permite reintegrar a las sociedades de origen capital humano formado y cualificado, con las consecuencias positivas para el desarrollo social y económico en estas sociedades. Mantiene la calidad de vida afectiva y emocional en los migrantes y su entorno familiar. Intensifica la relación entre las dos sociedades y simplifica los problemas que supone la convivencia entre sistemas culturales o religiosos contradictorios. Especialmente referidos a la libertad e igualdad. Son múltiples los ejemplos referidos a la violencia de género, sobre niños, etc., inaceptables en los estados sociales de derecho democráticos que predominan en las sociedades occidentales. Ciertamente el ámbito de aplicación óptimo lo define la migración económica. Este enfoque

Circular relativistic motion of two identical bodies

International Nuclear Information System (INIS)

Shavokhina, N.S.

1983-01-01

Circular relativistic motion of two bodies as a solution of the earlier obtained equations with a deflecting argument where the self-deflection of the argument is an unknown function of time is considered. In case of circular motion the argument deflection is independent from time and it is the root of the transcendental equation obtained in the paper

Single particle dynamics in circular accelerators

International Nuclear Information System (INIS)

Ruth, R.D.

1986-10-01

The purpose of this paper is to introduce the reader to the theory associated with the transverse dynamics of single particle, in circular accelerators. The discussion begins with a review of Hamiltonian dynamics and canonical transformations. The case of a single particle in a circular accelerator is considered with a discussion of non-linear terms and chromaticity. The canonical perturbation theory is presented and nonlinear resonances are considered. Finally, the concept of renormalization and residue criterion are examined. (FI)

Management of paediatric tibial fractures using two types of circular external fixator: Taylor spatial frame and Ilizarov circular fixator.

Science.gov (United States)

Tafazal, Suhayl; Madan, Sanjeev S; Ali, Farhan; Padman, Manoj; Swift, Simone; Jones, Stanley; Fernandes, James A

2014-05-01

The use of circular fixators for the treatment of tibial fractures is well established in the literature. The aim of this study was to compare the Ilizarov circular fixator (ICF) with the Taylor spatial frame (TSF) in terms of treatment results in consecutive patients with tibial fractures that required operative management. A retrospective analysis of patient records and radiographs was performed to obtain patient data, information on injury sustained, the operative technique used, time duration in frame, healing time and complications of treatment. The minimum follow-up was 24 months. Ten patients were treated with ICF between 2000 and 2005, while 15 patients have been treated with TSF since 2005. Two of the 10 treated with ICF and 5 of the 15 treated with TSF were open fractures. All patients went on to achieve complete union. Mean duration in the frame was 12.7 weeks for ICF and 14.8 weeks for the TSF group. Two patients in the TSF group had delayed union and required additional procedures including adjustment of fixator and bone grafting. There was one malunion in the TSF group that required osteotomy and reapplication of frame. There were seven and nine pin-site infections in the ICF and TSF groups, respectively, all of which responded to antibiotics. There were no refractures in either group. In an appropriate patient, both types of circular fixator are equally effective but have different characteristics, with TSF allowing for postoperative deformity correction. Of concern are the two cases of delayed union in the TSF group, all in patients with high-energy injuries. We feel another larger study is required to provide further clarity in this matter. Level II-comparative study.

Ministerial Circular No. 73 of 1 December 1977 on the medical uses of ionizing radiation. Commentary

International Nuclear Information System (INIS)

This circular by the Minister of Public Health specifies the provisions for medical uses of sources of ionizing for radiation. Such uses are subject to prior notification and a licensing system as well as to inspections carried out by the Health Authorities and the National Commission for Nuclear Energy (CNEN). It follows the general decentralisation policy begun in Italy in 1972 and formulates recommendations to the regional competent bodies which are henceforth responsible for the surveillance of the medical uses of sources of ionizing radiation. (NEA) [fr

Nearest Neighbor Estimates of Entropy for Multivariate Circular Distributions

Directory of Open Access Journals (Sweden)

Neeraj Misra

2010-05-01

Full Text Available In molecular sciences, the estimation of entropies of molecules is important for the understanding of many chemical and biological processes. Motivated by these applications, we consider the problem of estimating the entropies of circular random vectors and introduce non-parametric estimators based on circular distances between n sample points and their k th nearest neighbors (NN, where k (≤ n – 1 is a fixed positive integer. The proposed NN estimators are based on two different circular distances, and are proven to be asymptotically unbiased and consistent. The performance of one of the circular-distance estimators is investigated and compared with that of the already established Euclidean-distance NN estimator using Monte Carlo samples from an analytic distribution of six circular variables of an exactly known entropy and a large sample of seven internal-rotation angles in the molecule of tartaric acid, obtained by a realistic molecular-dynamics simulation.

Propagation and radiation characteristics of the circular electric, circular magnetic and hybrid waveguide modes

International Nuclear Information System (INIS)

Crenn, J.P.

1996-06-01

The field distributions and propagation constants of the circular electric, circular magnetic and hybrid modes of oversized waveguides are expressed, taking the effects of walls into account. The near and far field patterns are derived in the case of real wall functions. It is shown that, for very oversized waveguides, the terms containing wall functions can be ignored in the calculations, and it results that the expressions of fields and propagation constants become independent of the types of waveguides. An application to corrugated waveguides for Electron Cyclotron Resonance Heating experiments shows the variations of the radiation characteristics versus geometric parameters of the corrugations and determines the ranges of interest for these parameters. (author)

Angular momentum of circularly polarized light in dielectric media

OpenAIRE

Mansuripur, Masud

2014-01-01

A circularly polarized plane-wave is known to have no angular momentum when examined through Maxwell's equations. This, however, contradicts the experimentally observed facts, where finite segments of plane waves are known to be capable of imparting angular momentum to birefringent platelets. Using a superposition of four plane-waves propagating at slightly different angles to a common direction, we derive an expression for the angular momentum density of a single plane-wave in the limit when...

Shear strength of reinforced concrete circular cross-section beams

Directory of Open Access Journals (Sweden)

P. W. G. N. Teixeira

Full Text Available A proposed adequation of NBR 6118, Item 7.4, related to shear strength of reinforced concrete beams is presented with aims to application on circular cross-section. The actual expressions are most suitable to rectangular cross-section and some misleading occurs when applied to circular sections at determination of VRd2, Vc and Vsw, as consequence of bw (beam width and d (effective depth definitions as well as the real effectiveness of circular stirrups. The proposed adequation is based on extensive bibliographic review and practical experience with a great number of infrastructure elements, such as anchored retaining pile walls, where the use of circular reinforced concrete members is frequent.

Comparison of Scour and Flow Characteristics Around Circular and Oblong Bridge Piers in Seepage Affected Alluvial Channels

Science.gov (United States)

Chavan, Rutuja; Venkataramana, B.; Acharya, Pratik; Kumar, Bimlesh

2018-06-01

The present study examines scour geometry and turbulent flow characteristics around circular and oblong piers in alluvial channel with downward seepage. Experiments were conducted in plane sand bed of non-uniform sand under no seepage, 10% seepage and 15% seepage conditions. Scour depth at oblong pier is significantly lesser than the scour depth at circular one. However, the scour depth at both piers reduces with downward seepage. The measurements show that the velocity and Reynolds stresses are negative near the bed at upstream of piers where the strong reversal occurs. At downstream of oblong pier near the free surface, velocity and Reynolds stresses are less positive; whereas, they are negative at downstream of circular pier. The streamline shape of oblong pier leads to reduce the strength of wake vortices and consequently reversal flow at downstream of pier. With application of downward seepage turbulent kinetic energy is decreasing. The results show that the wake vortices at oblong pier are weaker than the wake vortices at circular pier. The strength of wake vortices diminishes with downward seepage. The Strouhal number is lesser for oblong pier and decreases with downward seepage for both oblong and circular piers.

15 CFR Supplement No. 13 to Part 760 - Interpretation

Science.gov (United States)

2010-01-01

.... Analysis of Additional Contractual Language The Office of Antiboycott Compliance has learned of the... consistent with the language discussed in Supplement No. 1 to part 760, the second sentence significantly... agreeing to refuse to do business for boycott reasons. The apparent attempt to bring this language within...

Modeling of circular-grating surface-emitting lasers

Science.gov (United States)

Shams-Zadeh-Amiri, Ali M.

Grating-coupled surface-emitting lasers became an area of growing interest due to their salient features. Emission from a broad area normal to the wafer surface, makes them very well suited in high power applications and two- dimensional laser arrays. These new possibilities have caused an interest in different geometries to fully develop their potential. Among them, circular-grating lasers have the additional advantage of producing a narrow beam with a circular cross section. This special feature makes them ideal for coupling to optical fibers. All existing theoretical models dealing with circular- grating lasers only consider first-order gratings, or second-order gratings, neglecting surface emission. In this thesis, the emphasis is to develop accurate models describing the laser performance by considering the radiation field. Toward this aim, and due to the importance of the radiation modes in surface-emitting structures, a theoretical study of these modes in multilayer planar structures has been done in a rigorous and systematic fashion. Problems like orthogonality of the radiation modes have been treated very accurately. We have considered the inner product of radiation modes using the distribution theory. Orthogonality of degenerate radiation modes is an important issue. We have examined its validity using the transfer matrix method. It has been shown that orthogonality of degenerate radiation modes in a very special case leads to the Brewster theorem. In addition, simple analytical formulas for the normalization of radiation modes have been derived. We have shown that radiation modes can be handled in a much easier way than has been thought before. A closed-form spectral dyadic Green's function formulation of multilayer planar structures has been developed. In this formulation, both rectangular and cylindrical structures can be treated within the same mathematical framework. The Hankel transform of some auxiliary functions defined on a circular aperture has

Molecular photoelectron holography with circularly polarized laser pulses.

Science.gov (United States)

Yang, Weifeng; Sheng, Zhihao; Feng, Xingpan; Wu, Miaoli; Chen, Zhangjin; Song, Xiaohong

2014-02-10

We investigate the photoelectron momentum distribution of molecular-ion H2+driven by ultrashort intense circularly polarized laser pulses. Both numerical solutions of the time-dependent Schrödinger equation (TDSE) and a quasiclassical model indicate that the photoelectron holography (PH) with circularly polarized pulses can occur in molecule. It is demonstrated that the interference between the direct electron wave and rescattered electron wave from one core to its neighboring core induces the PH. Moreover, the results of the TDSE predict that there is a tilt angle between the interference pattern of the PH and the direction perpendicular to the molecular axis. Furthermore, the tilt angle is sensitively dependent on the wavelength of the driven circularly polarized pulse, which is confirmed by the quasiclassical calculations. The PH induced by circularly polarized laser pulses provides a tool to resolve the electron dynamics and explore the spatial information of molecular structures.

Circular pools in the seagrass beds of the Banc d'Arguin, Mauritania, and their possible origin

NARCIS (Netherlands)

van der Laan, BBPA; Wolff, WJ

The tidal flats of the Banc d'Arguin, Mauritania, are covered by vast beds of Zostera noltii. At low tide these seagrass beds appear to be interspersed with partly vegetated, circular pools of 5-25 in diameter. Between February and May 2001 we described these pools and studied their possible origin.

Organización territorial y distribución de la tierra en la comunidad de San Felipe Otlaltepec, Puebla, México

Directory of Open Access Journals (Sweden)

Jesús García Maceda

2014-01-01

Full Text Available San Felipe Otlaltepec, una comunidad indígena Popoloca del estado de Puebla, organiza su territorio en secciones, una unidad territorial colonial. Esta organización es la base de la apropiación del territorio urbano y de las tierras agrícolas. Con entrevistas y fotografías aéreas, se construyó un modelo de la conformación original y actual de las viviendas de las secciones y de la apropiación de la tierra, para su comparación. Actualmente, se observa una mezcla de viviendas de diferentes secciones, que no corresponde al arreglo original de las mismas. Situación similar se observó en la distribución de las tierras agrícolas. Estos cambios se deben principalmente a casamientos entre miembros de diferentes secciones, los cuales cambian la posesión de la tierra y la pertenencia a una sección determinada. A pesar de la mezcla de viviendas de diferentes secciones, los entrevistados manifestaron un sentido profundo de pertenencia a la sección a la que pertenecen formalmente.

Cone-beam and fan-beam image reconstruction algorithms based on spherical and circular harmonics

International Nuclear Information System (INIS)

Zeng, Gengsheng L; Gullberg, Grant T

2004-01-01

A cone-beam image reconstruction algorithm using spherical harmonic expansions is proposed. The reconstruction algorithm is in the form of a summation of inner products of two discrete arrays of spherical harmonic expansion coefficients at each cone-beam point of acquisition. This form is different from the common filtered backprojection algorithm and the direct Fourier reconstruction algorithm. There is no re-sampling of the data, and spherical harmonic expansions are used instead of Fourier expansions. As a special case, a new fan-beam image reconstruction algorithm is also derived in terms of a circular harmonic expansion. Computer simulation results for both cone-beam and fan-beam algorithms are presented for circular planar orbit acquisitions. The algorithms give accurate reconstructions; however, the implementation of the cone-beam reconstruction algorithm is computationally intensive. A relatively efficient algorithm is proposed for reconstructing the central slice of the image when a circular scanning orbit is used

Circular economy and waste to energy

Science.gov (United States)

Rada, E. C.; Ragazzi, M.; Torretta, V.; Castagna, G.; Adami, L.; Cioca, L. I.

2018-05-01

Waste management in European Union has long being regulated by the 4Rs principle, i.e. reduction, reuse, recycling, recovery, with landfill disposal as the last option. This vision recently led the European Union (especially since 2015) to the introduction of virtuous goals based on the rejection of linear economy in favour of circular economy strongly founded on materials recovery. In this scenario, landfill disposal option will disappear, while energy recovery may appear controversial when not applied to biogas production from anaerobic digestion. The present work aims to analyse the effects that circular economy principles introduced in the European Union context will have on the thermochemical waste treatment plants design. Results demonstrate that indirect combustion (gasification + combustion) along with integrated vitrification of the non-combustible fraction of treated waste will have a more relevant role in the field of waste treatment than in the past, thanks to the compliance of this option with the principles of circular economy.

Advisory Circular checklist and status of other FAA publications

Science.gov (United States)

1997-08-15

This 1997 circular transmits the revised checklist of the Federal Aviation : Administration's (FAA) Advisory Circulars (AC's). It also lists certain other : FAA publications sold by the Superintendent of Documents.

Circular RNAs

DEFF Research Database (Denmark)

Han, Yi-Neng; Xia, Shengqiang; Zhang, Yuan-Yuan

2017-01-01

Circular RNAs (circRNAs) are a novel type of universal and diverse endogenous noncoding RNAs (ncRNAs) and they form a covalently closed continuous loop without 5' or 3' tails unlike linear RNAs. Most circRNAs are presented with characteristics of abundance, stability, conservatism, and often exhi...... and expression regulators, RBP sponges in cancer as well as current research methods of circRNAs, providing evidence for the significance of circRNAs in cancer diagnosis and clinical treatment....

Circular fringe projection profilometry.

Science.gov (United States)

Zhao, Hong; Zhang, Chunwei; Zhou, Changquan; Jiang, Kejian; Fang, Meiqi

2016-11-01

In this Letter, a novel three-dimensional (3D) measurement method, called the circular fringe projection profilometry (CFPP), is proposed. Similar to the conventional fringe projection profilometry, CFPP also requires fringe pattern projection and capture, phase demodulation, and phase unwrapping. However, it works with a totally different mechanism. CFPP recovers the height of a point by calculating its distance to the optical center of a projector along the optical axis. This distance is calculated with the aid of the divergence angle of a projected light ray and the distance between the measured point and the optical axis. The distance between the measured point and the optical axis is detected by a camera with telecentric lenses, while the divergence angle can be calculated from the phase of a captured circular fringe pattern. The validity of CFPP is confirmed by a set of experiments.

Finite Element Analysis of Circular Plate using SolidWorks

International Nuclear Information System (INIS)

Kang, Yeo Jin; Jhung, Myung Jo

2011-01-01

Circular plates are used extensively in mechanical engineering for nuclear reactor internal components. The examples in the reactor vessel internals are upper guide structure support plate, fuel alignment plate, lower support plate etc. To verify the structural integrity of these plates, the finite element analyses are performed, which require the development of the finite element model. Sometimes it is very costly and time consuming to make the model especially for the beginners who start their engineering job for the structural analysis, necessitating a simple method to develop the finite element model for the pursuing structural analysis. Therefore in this study, the input decks are generated for the finite element analysis of a circular plate as shown in Fig. 1, which can be used for the structural analysis such as modal analysis, response spectrum analysis, stress analysis, etc using the commercial program Solid Works. The example problems are solved and the results are included for analysts to perform easily the finite element analysis of the mechanical plate components due to various loadings. The various results presented in this study would be helpful not only for the benchmark calculations and results comparisons but also as a part of the knowledge management for the future generation of young designers, scientists and computer analysts

Experimental investigation of complex circular Airy beam characteristics

Science.gov (United States)

Porfirev, A. P.; Fomchenkov, S. A.; Khonina, S. N.

2018-04-01

We demonstrate a new type of circular Airy beams, the so-called azimuthally modulated circular Airy beams, generated by utilizing a diffraction element, whose transmission function is the sum of the transmission function of the element generating a "petal" pattern and the transmission function of the element generating a circular Airy beam. We experimentally investigate the propagation dynamics of such beams and demonstrate that their autofocusing and selfhealing properties are strongly dependent on the number of generated petals. These beams are a combination of a conventional circular Airy beam and vortex laser beams (or their superpositions). Using a spatial light modulator, we demonstrate that these beams have unique properties such as autofocusing, "nondiffractive" propagation and self-healing after passing through an obstacle. The experimental results are in good agreement with the simulation. We believe that these results can be very useful for lensless laser fabrication and laser manipulation techniques, as well as for development of new filament plasma multi-channel formation methods.

15 CFR Supplement No. 11 to Part 760 - Interpretation

Science.gov (United States)

2010-01-01

... TRADE PRACTICES OR BOYCOTTS Pt. 760, Supp. 11 Supplement No. 11 to Part 760—Interpretation Definition of... who receives an unsolicited invitation to bid, or similar proposal, containing a boycott request has... in receipt of an invitation containing a boycott term or condition is undecided about a response by...

12 CFR 563g.8 - Use of the offering circular.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Use of the offering circular. 563g.8 Section 563g.8 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY SECURITIES OFFERINGS § 563g.8 Use of the offering circular. (a) An offering circular or amendment declared effective by the...

SIMULACIÓN DE FORMACIÓN DE ESTRUCTURAS DE GRANO PERIMETRAL, COLUMNAR Y EQUIAXIAL EN SECCIONES DE ACERO INCLUYENDO RUTINAS DE PRE-SOLIDIFICACIÓN

Directory of Open Access Journals (Sweden)

Adán Ramírez-López

2010-01-01

Full Text Available Este trabajo muestra el desarrollo y la implementación de algoritmos computacionales basados en teoría del caos y autómatas celulares para la simulación del crecimiento de granos en secciones cuadradas de acero producidas por colada continua. Se desarrollaron tres algoritmos para la simulación de las estructuras de grano en las zonas perimetral, columnar y equiaxial; incluyen rutinas para estimular la nucleación y crecimiento del grano. Estas fueron compiladas separadamente al algoritmo principal con el objeto de hacer más eficiente el sistema de simulación. Los algoritmos analizan todos los nodos a cada paso, durante la simulación de cálculo y una interfase de despliegue gráfico muestra en la pantalla el proceso de solidificación. La teoría del caos fue empleada integrando un proceso aleatorio de selección. El resultado de este análisis es una imagen digital de celdas que representan a los granos (autómata celular y es desplegada en la pantalla en función a un código numérico asignado a las posiciones nodales.

Swarm Robotics with Circular Formation Motion Including Obstacles Avoidance

Directory of Open Access Journals (Sweden)

Nabil M. Hewahi

2017-07-01

Full Text Available The robots science has been developed over the past few years, where robots have become used to accomplish difficult, repetitive or accurate tasks, which are very hard for humans to carry out. In this paper, we propose an algorithm to control the motion of a swarm of robots and make them able to avoid obstacles. The proposed solution is based on forming the robots in circular fashion. A group set of robots consists of multiple groups of robots, each group of robots consists of robots forming a circular shape and each group set is a circular form of robots. The proposed algorithm is concerned with first locating the randomly generated robots in groups and secondly with the swarm robot motion and finally with the swarm obstacle avoidance and swarm reorganization after crossing the obstacle. The proposed algorithm has been simulated with five different obstacles with various numbers of randomly generated robots. The results show that the swarm in the circular form can deal with the obstacles very effectively by passing the obstacles smoothly. The proposed algorithm has been compared with flocking algorithm and it is shown that the circular formation algorithm does not need extensive computation after obstacle avoidance whereas the flocking algorithm needs extensive computation. In addition, the circular formation algorithm maintains every robot in its group after avoiding the obstacles whereas with flocking algorithm does not.

FUCHS—towards full circular RNA characterization using RNAseq

Directory of Open Access Journals (Sweden)

Franziska Metge

2017-02-01

Full Text Available Circular RNAs (circRNAs belong to a recently re-discovered species of RNA that emerge during RNA maturation through a process called back-splicing. A downstream 5′ splice site is linked to an upstream 3′ splice site to form a circular transcript instead of a canonical linear transcript. Recent advances in next-generation sequencing (NGS have brought circRNAs back into the focus of many scientists. Since then, several studies reported that circRNAs are differentially expressed across tissue types and developmental stages, implying that they are actively regulated and not merely a by-product of splicing. Though functional studies have shown that some circRNAs could act as miRNA-sponges, the function of most circRNAs remains unknown. To expand our understanding of possible roles of circular RNAs, we propose a new pipeline that could fully characterizes candidate circRNA structure from RNAseq data—FUCHS: FUll CHaracterization of circular RNA using RNA-Sequencing. Currently, most computational prediction pipelines use back-spliced reads to identify circular RNAs. FUCHS extends this concept by considering all RNA-seq information from long reads (typically >150 bp to learn more about the exon coverage, the number of double break point fragments, the different circular isoforms arising from one host-gene, and the alternatively spliced exons within the same circRNA boundaries. This new knowledge will enable the user to carry out differential motif enrichment and miRNA seed analysis to determine potential regulators during circRNA biogenesis. FUCHS is an easy-to-use Python based pipeline that contributes a new aspect to the circRNA research.

15 CFR Supplement No. 3 to Part 760 - Interpretation

Science.gov (United States)

2010-01-01

... TRADE PRACTICES OR BOYCOTTS Pt. 760, Supp. 3 Supplement No. 3 to Part 760—Interpretation Pursuant to... economic boycott of Israel was formally terminated on January 25, 1980. On the basis of this action, it is... considered boycott-related by implication now cannot be presumed boycott-related and thus would not be...

15 CFR Supplement No. 7 to Part 760 - Interpretation

Science.gov (United States)

2010-01-01

... TRADE PRACTICES OR BOYCOTTS Pt. 760, Supp. 7 Supplement No. 7 to Part 760—Interpretation Prohibited Refusal To Do Business When a boycotting country rejects for boycott-related reasons a shipment of goods... supplier and demand restitution). The U.S. person may then make a non-boycott based selection of another...

15 CFR Supplement No. 16 to Part 760 - Interpretation

Science.gov (United States)

2010-01-01

... TRADE PRACTICES OR BOYCOTTS Pt. 760, Supp. 16 Supplement No. 16 to Part 760—Interpretation Pursuant to... boycott of Israel was formally terminated on August 16, 1995. On the basis of this action, it is the... considered boycott-related by implication now cannot be presumed boycott-related and thus would not be...

On the Recognition of Fuzzy Circular Interval Graphs

OpenAIRE

Oriolo, Gianpaolo; Pietropaoli, Ugo; Stauffer, Gautier

2011-01-01

Fuzzy circular interval graphs are a generalization of proper circular arc graphs and have been recently introduced by Chudnovsky and Seymour as a fundamental subclass of claw-free graphs. In this paper, we provide a polynomial-time algorithm for recognizing such graphs, and more importantly for building a suitable representation.

5 CFR 1310.5 - List of current circulars.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false List of current circulars. 1310.5 Section 1310.5 Administrative Personnel OFFICE OF MANAGEMENT AND BUDGET OMB DIRECTIVES OMB CIRCULARS § 1310.5... and Use of Voluntary Consensus Standards and in Conformity Assessment Activities” A-122—“Cost...

An analysis of near-circular lunar mapping orbits

Indian Academy of Sciences (India)

Numerical investigations have been carried out to analyse the evolution of lunar circular orbits and the influence of the higher order harmonics of the lunar gravity field. The aim is to select the appropriate near-circular orbit characteristics, which extend orbit life through passive orbit maintenance. The spherical harmonic ...

University Students Alternative Conceptions On Circular Motion

OpenAIRE

Ian Phil Canlas

2015-01-01

This study attempted to find out university students alternative conceptions on circular motion. An 18-item researcher-compiled and content-validated questionnaire was administered to twenty-six 26 students taking up a program in Bachelor in Secondary Education-Physical Science in their second year enrolled in a course on mechanics. Results revealed that majority of the students possess alternative conceptions on circular motion specifically along velocity acceleration and force. Moreover res...

Circular mode: a new scanning probe microscopy method for investigating surface properties at constant and continuous scanning velocities.

Science.gov (United States)

Nasrallah, Hussein; Mazeran, Pierre-Emmanuel; Noël, Olivier

2011-11-01

In this paper, we introduce a novel scanning probe microscopy mode, called the circular mode, which offers expanded capabilities for surface investigations especially for measuring physical properties that require high scanning velocities and/or continuous displacement with no rest periods. To achieve these specific conditions, we have implemented a circular horizontal displacement of the probe relative to the sample plane. Thus the relative probe displacement follows a circular path rather than the conventional back and forth linear one. The circular mode offers advantages such as high and constant scanning velocities, the possibility to be combined with other classical operating modes, and a simpler calibration method of the actuators generating the relative displacement. As application examples of this mode, we report its ability to (1) investigate the influence of scanning velocity on adhesion forces, (2) measure easily and instantly the friction coefficient, and (3) generate wear tracks very rapidly for tribological investigations. © 2011 American Institute of Physics

The study of evaluation index system on construction enterprise’s circular economy

Science.gov (United States)

Yi, Lu; Liu, Zhigang

2017-06-01

The development of circular economy is an important way to judge quality of enterprise development and to realize the sustainable development of enterprises. This paper will combine the characteristics of the development of circular economy in construction enterprise to construct circular economy evaluation index system. Then it uses fuzzy mathematics theory and hierarchical analysis evaluation method for comprehensive evaluation of circular economy development level. Through the empirical analysis, the paper provides the reference basis for construction enterprises to further improve the level of circular economy.

Fabrication of circular microfluidic network in enzymatically-crosslinked gelatin hydrogel

Energy Technology Data Exchange (ETDEWEB)

He, Jiankang, E-mail: jiankanghe@mail.xjtu.edu.cn; Chen, Ruomeng; Lu, Yongjie; Zhan, Li; Liu, Yaxiong; Li, Dichen; Jin, Zhongmin

2016-02-01

It is a huge challenge to engineer vascular networks in vital organ tissue engineering. Although the incorporation of artificial microfluidic network into thick tissue-engineered constructs has shown great promise, most of the existing microfluidic strategies are limited to generate rectangle cross-sectional channels rather than circular vessels in soft hydrogels. Here we present a facile approach to fabricate branched microfluidic network with circular cross-sections in gelatin hydrogels by combining micromolding and enzymatically-crosslinking mechanism. Partially crosslinked hydrogel slides with predefined semi-circular channels were molded, assembled and in situ fully crosslinked to form a seamless and circular microfluidic network. The bonding strength of the resultant gelatin hydrogels was investigated. The morphology and the dimension of the resultant circular channels were characterized using scanning electron microscopy (SEM) and micro-computerized tomography (μCT). Computational fluid dynamic simulation shows that the fabrication error had little effect on the distribution of flow field but affected the maximum velocity in comparison with designed models. The microfluidic gelatin hydrogel facilitates the attachment and spreading of human umbilical endothelial cells (HUVECs) to form a uniform endothelialized layer around the circular channel surface, which successfully exhibited barrier functions. The presented method might provide a simple way to fabricate circular microfluidic networks in biologically-relevant hydrogels to advance various applications of in vitro tissue models, organ-on-a-chip systems and tissue engineering. - Highlights: • A facile method was proposed to build a circular fluidic network in gelatin hydrogel. • The fluidic network is mechanically robust and supports physiological flow. • HUVECs formed endothelialized layer around the channel to express barrier function.

Circular Business Models: Defining a Concept and Framing an Emerging Research Field

Directory of Open Access Journals (Sweden)

Julia L. K. Nußholz

2017-10-01

Full Text Available To aid companies in transitioning towards a circular economy and adopting strategies such as reuse, repair, and remanufacturing, the concept of circular business models has been developed. Although the concept draws on contributions from various academic disciplines, and despite its increasingly frequent use, few scholars clearly define what a circular business model is. Understanding about what makes a business model circular is diverse, hampering the theoretical development and practical application of circular business models. This study aims to help frame the field of circular business model research, by clarifying the fundamentals of the concept from the perspectives of resource efficiency and business model innovation. Expanding on these findings, a review of how the concept is used in recent academic literature is provided. It shows that a coherent view is lacking on which resource efficiency strategies classify a business model as circular. This study clarifies which resource efficiency strategies can be deemed as relevant key strategies for circular business models, and suggests a new definition of the concept. With the definition grounded in analysis of the fundamentals in terms of resource efficiency and business models, the study contributes to theoretical advancement and effective implementation of circular business models.

Band vs. Circular Sawmills: Relative Labor & Maintenance Costs

Science.gov (United States)

Philip H. Steele; Philip A. Araman

1997-01-01

Substantial sawmill lumber yield increases from kerf and sawing variation reductions can be realized by employing band rather than circular headrigs. Softwood sawmills rapidly adopted bandsaw headrig technology to the extent that it is currently unusual to find circular saw headrigs in a softwood sawmill. Hardwood sawmills, faced with a different economic situation,...

How can design science contribute to a circular economy?

DEFF Research Database (Denmark)

Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2017-01-01

Circular Economy is increasingly seen as a key approach to operationalising goals and supporting the transition to a sustainable society by enhancing competitiveness and economic growth. Creating a Circular Economy requires fundamental changes throughout the value chain, from innovation, product...... design and production processes all the way to end of life, new business models and consumption patterns. This paper explores how design science can support the transition from the traditional linear 'take-make-consume-dispose' approach, to a Circular Economy. By means of a systematic literature review...

Calibration of circular aperture area using vision probe at inmetro

Directory of Open Access Journals (Sweden)

Costa Pedro Bastos

2016-01-01

Full Text Available Circular aperture areas are standards of high importance for the realization of photometric and radiometric measurements, where the accuracy of these measures is related to the accuracy of the circular aperture area calibrations. In order to attend the requirement for traceability was developed in Brazilian metrology institute, a methodology for circular aperture area measurement as requirements from the radiometric and photometric measurements. In the developed methodology apertures are measured by non-contact measurement through images of the aperture edges captured by a camera. These images are processed using computer vision techniques and then the values of the circular aperture area are determined.

¿Son diferentes los migrantes circulares? La integración, el bienestar y la intención de quedarse de los que migran por primera vez y de los migrantes circulares (Are circular migrants different? Integration, wellbeing, and intention to stay of first-time and circular migrants

Directory of Open Access Journals (Sweden)

Michael Braun

2010-12-01

Full Text Available ResumenCon datos tomados del proyecto PIONEUR sobre la migración interna en la Unión Europea, definiremos (una forma débil de migrantes circulares como el colectivo de aquellos migrantes que ya habían experimentado una estancia prolongada en el país de residencia (en lo sucesivo abreviado a PDR antes de su traslado definitivo. A continuación, se ofrecerá una descripción de este colectivo junto con sus características sociodemográficas y se emplearán análisis de regresión (multinivel para determinar si la migración circular explica las diferencias en algunas variables dependientes (como el dominio del idioma, el apego al PDR que arrojan esos migrantes teniendo en cuenta las características sociodemográficas. De este modo, la migración circular estaría relacionada con un mayor contacto con la cultura del PDR y con una decisión consciente de regresar al país.AbstractUsing data from the PIONEUR project on intra-European migration, (a weak form of circular migrants will be defined by the group of migrants who experienced a prolonged sojourn in the country of residence (in the following abbreviated as CoR already before the final move. Then this group will be described along socio-demographic characteristics and (multilevel regression analysis will be used to determine whether circular migration explains differences in some outcome variables (such as language proficiency, attachment to the CoR, net of the socio-demographic characteristics these migrants have. Circular migration would then be related to additional exposure to the culture of the CoR and a conscious decision to re-enter the country.

FUTURE CIRCULAR COLLIDER LOGISTICS STUDY

CERN Document Server

Beißert, Ulrike; Kuhlmann, Gerd; Nettsträter, Andreas; Prasse, Christian; Wohlfahrt, Andreas

2018-01-01

The Large Hadron Collider (LHC) at the European Organization for Nuclear Research CERN in Geneva is the largest and most powerful collider in the world. CERN and its research and experimental infrastructure is not only a focus for the science community but is also very much in the public eye. With the Future Circular Collider (FCC) Study, CERN has begun to examine the feasibility of a new underground accelerator ring with a length of approximately 100 kilometres. Logistics is of great importance for the construction, assembly and operation of the FCC. During the planning, construction and assembly of the LHC, logistics proved to be one of the key factors. As the FCC is even larger than the LHC, logistics will also become more and more significant. This report therefore shows new concepts, methods and analytics for logistics, supply chain and transport concepts as part of the FCC study. This report deals with three different logistics aspects for the planning and construction phase of FCC: 1. A discussion of d...

Effect of Temperature on Topological States of Circular DNA

Science.gov (United States)

Fan, Yang-Tao; Li, Xiu-Yan; Liu, Yan-Hui; Chen, Hu

2017-07-01

The different topological states of circular double-stranded DNA can be defined by their linking number. The equilibrium distribution of linking number can be obtained by circularizing a linear DNA into a circle by ligase. Based on the recent experimental results that the DNA bending rigidity and twist rigidity strongly depend on temperature, the reduced bending rigidity can be approximated by g=(3.19× {10}-19-T\\cdot 4.14× {10}-22) {erg}\\cdot {cm} over the temperature interval (5 ∼ 53) °C, and the temperature dependence of twist rigidity can be fitted by C(T)=(4588.89{exp} (-T/117.04)-251.33) nm. The temperature dependence of the linking number distribution of circular DNAs can be predicted by using Monte Carlo simulation. The variance of linking number distribution on temperature is in accordance with the previous experimental results. Compared with the temperature dependence of bending rigidity, the temperature dependence of twist rigidity causes a noticeable fluctuation in linking number distribution and mainly contribute towards the variance change of linking number distribution of circular DNA. The variance of the writhe number and twist number in the equation = + depends on the length of circular DNA. When the length of circular DNA is less than 230 nm, the variance of twist number is dominant over the variance of writhe number ( ), whereas for the condition that the length of the circular DNA is larger than 370 nm. Supported by the National Natural Science Foundation of China under Grant Nos. 11047022, 11204045, and 11464004, Guizhou Provincial Tracking Key Program of Social Development (SY20123089, SZ20113069), the General Financial Grant from the China Postdoctoral Science Foundation (2014M562341), the Research Foundation for Young University Teachers from Guizhou University (201311), and College Innovation Talent Team of Guizhou Province (2014)32

Breaking the Barriers to the Circular Economy

OpenAIRE

Kirchherr, J.W.; Hekkert, M.P.; Bour, Ruben; Huijbrechtse-Truijens, Anne; Kostense-Smit, Erica; Muller, Jennifer

2017-01-01

The Copernicus Institute of Sustainable Development, Utrecht University, the Netherlands and Deloitte have jointly carried out research on barriers to the Circular Economy (CE) in the European Union. For this research, a survey with 153 businesses, 55 government officials and expert interviews with forty-seven thought leaders on the circular economy from businesses, governments, academia and NGOs have been carried out. Two types of barriers emerged as main barriers Firstly, there are the cult...

Extended high circular polarization in the Orion massive star forming region: implications for the origin of homochirality in the solar system.

Science.gov (United States)

Fukue, Tsubasa; Tamura, Motohide; Kandori, Ryo; Kusakabe, Nobuhiko; Hough, James H; Bailey, Jeremy; Whittet, Douglas C B; Lucas, Philip W; Nakajima, Yasushi; Hashimoto, Jun

2010-06-01

We present a wide-field (approximately 6' x 6') and deep near-infrared (K(s) band: 2.14 mum) circular polarization image in the Orion nebula, where massive stars and many low-mass stars are forming. Our results reveal that a high circular polarization region is spatially extended (approximately 0.4 pc) around the massive star-forming region, the BN/KL nebula. However, other regions, including the linearly polarized Orion bar, show no significant circular polarization. Most of the low-mass young stars do not show detectable extended structure in either linear or circular polarization, in contrast to the BN/KL nebula. If our solar system formed in a massive star-forming region and was irradiated by net circularly polarized radiation, then enantiomeric excesses could have been induced, through asymmetric photochemistry, in the parent bodies of the meteorites and subsequently delivered to Earth. These could then have played a role in the development of biological homochirality on Earth.

Soil and land management in a circular economy.

Science.gov (United States)

Breure, A M; Lijzen, J P A; Maring, L

2018-05-15

This article elaborates the role of soil and land management in a circular economy. The circular economy is highly dependent on the functioning of soils and land for the production of food and other biomass; the storage, filtration and transformation of many substances including water, carbon, and nitrogen; the provision of fresh mineral resources and fossil fuels; and the use of their functions as the platform for nature and human activities. Resource demand is increasing as a result of the growing human population. In addition to the shrinking availability of resources resulting from their unsustainable use in the past, our planet's diminishing potential for resource production, due to a range of reasons, is leading to resource scarcity, especially in the case of depletable resources. As an economic system that focuses on maximizing the reuse of resources and products and minimizing their depreciation, the circular economy greatly influences, and depends on, soil and land management. The concise management of the resources, land and soil is thus necessary, to make a circular economy successful. Copyright © 2017 Elsevier B.V. All rights reserved.

Second-harmonic generation circular dichroism spectroscopy from tripod-like chiral molecular films

International Nuclear Information System (INIS)

Wang Xiao-Ou; Chen Li-An; Chen Li-Xue; Sun Xiu-Dong; Li Jun-Qing; Li Chun-Fei

2010-01-01

The second-harmonic generation (SHG) circular dichroism in the light of reflection from chiral films of tripod-like chiral molecules is investigated. The expressions of the second-harmonic generation circular dichroism are derived from our presented three-coupled-oscillator model for the tripod-like chiral molecules. Spectral dependence of the circular dichroism of SHG from film surface composed of tripod-like chiral molecules is simulated numerically and analysed. Influence of chiral parameters on the second-harmonic generation circular dichroism spectrum in chiral films is studied. The result shows that the second-harmonic generation circular dichroism is a sensitive method of detecting chirality compared with the ordinary circular dichroism in linear optics. All of our work indicates that the classical molecular models are very effective to explain the second-harmonic generation circular dichroism of chiral molecular system. The classical molecular model theory can give us a clear physical picture and brings us very instructive information about the link between the molecular configuration and the nonlinear processes

Inkjet printed circularly polarized antennas for GPS applications

KAUST Repository

Farooqui, Muhammad Fahad

2014-07-01

Two novel, inkjet printed circularly polarized antenna designs are presented for GPS applications. First antenna design comprises a planar monopole which has been made circularly polarized by the introduction of an L-shaped slit. The antenna shows a gain of 0.2 dBi at 1.575 GHz with 3-dB axial ratio bandwidth of 3.8%. The second antenna design comprises a modified monopole in the form of an inverted L and has been termed as circularly polarized inverted L antenna (CILA). The antenna shows a gain of -2 dBi at 1.575 GHz with 3-dB axial ratio bandwidth of 4.1%. Both the antenna designs are attractive for mobile applications.

Quantitative analysis of the flexibility effect of cisplatin on circular DNA

Science.gov (United States)

Ji, Chao; Zhang, Lingyun; Wang, Peng-Ye

2013-10-01

We study the effects of cisplatin on the circular configuration of DNA using atomic force microscopy (AFM) and observe that the DNA gradually transforms to a complex configuration with an intersection and interwound structures from a circlelike structure. An algorithm is developed to extract the configuration profiles of circular DNA from AFM images and the radius of gyration is used to describe the flexibility of circular DNA. The quantitative analysis of the circular DNA demonstrates that the radius of gyration gradually decreases and two processes on the change of flexibility of circular DNA are found as the cisplatin concentration increases. Furthermore, a model is proposed and discussed to explain the mechanism for understanding the complicated interaction between DNA and cisplatin.

Circular arc snakes and kinematic surface generation

KAUST Repository

Barton, Michael

2013-05-01

We discuss the theory, discretization, and numerics of curves which are evolving such that part of their shape, or at least their curvature as a function of arc length, remains unchanged. The discretization of a curve as a smooth sequence of circular arcs is well suited for such purposes, and allows us to reduce evolution of curves to the evolution of a control point collection in a certain finite-dimensional shape space. We approach this evolution by a 2-step process: linearized evolution via optimized velocity fields, followed by optimization in order to exactly fulfill all geometric side conditions. We give applications to freeform architecture, including "rationalization" of a surface by congruent arcs, form finding and, most interestingly, non-static architecture. © 2013 The Author(s) Computer Graphics Forum © 2013 The Eurographics Association and Blackwell Publishing Ltd.

Perturbation analysis of octupoles in circular accelerators

International Nuclear Information System (INIS)

Moohyun Yoon

1998-01-01

The octupole effects in a circular accelerator are analyzed using a first-order canonical perturbation theory. It is shown that, to the first order, the nonlinear amplitude-dependent tune shifts due to an octupole are composed of two types: terms of second order and terms of fourth order in betatron-oscillation amplitudes. The fourth-order part of tune shifts is expressed in terms of distortion functions. Distortion functions are also expanded in harmonics to express the higher-order tune shifts in harmonically expanded form. Finally, the results are applied to an accelerator and compared with the results of numerical tracking of particles. Laskar's algorithm for numerical analysis of the fundamental frequency is used to determine tunes from the tracking data, in which the error becomes inversely proportional to the cube of the number of data points. (author)

Circularly polarized luminescence of syndiotactic polystyrene

Science.gov (United States)

Rizzo, Paola; Abbate, Sergio; Longhi, Giovanna; Guerra, Gaetano

2017-11-01

Syndiotactic polystyrene (s-PS) films, when crystallized from the amorphous state by temporary sorption of non-racemic guest molecules (like carvone) not only exhibit unusually high optical activity, both in the UV-Visible and Infrared ranges, but also present circularly polarized luminescence (CPL) with high dissymmetry ratios (g = ΔI/I values in the range 0.02-0.03). Experimental evidences provide support, rather than to the usual molecular circular dichroism, to a supramolecular chiral optical response being extrinsic to the site of photon absorption and emission, possibly associated with a helical morphology of s-PS crystallites.

Magnetic field generation by circularly polarized laser light and inertial plasma confinement in a miniature 'Magnetic Bottle' induced by circularly polarized laser light

International Nuclear Information System (INIS)

Kolka, E.

1993-07-01

A new concept of hot plasma confinement in a miniature magnetic bottle induced by circularly polarized laser light is suggested in this work. Magnetic fields generated by circularly polarized laser light may be of the order of megagauss. In this configuration the circularly polarized laser light is used to get confinement of a plasma contained in a good conductor vessel. The poloidal magnetic field induced by the circularly polarized laser and the efficiency of laser absorption by the plasma are calculated in this work. The confinement in this scheme is supported by the magnetic forces and the Lawson criterion for a DT plasma might be achieved for number density n=5*10 21 cm -3 and confinement time τ= 20 nsec. The laser and the plasma parameters required to get an energetic gain are calculated. (authors)

La descongestión en la jurisdicción contencioso administrativa. Una visión desde el tribunal Administrativo de Cundinamarca

Directory of Open Access Journals (Sweden)

Leonardo Augusto Torres-Calderón

2010-03-01

Full Text Available La jurisdicción de lo contencioso administrativo está muy congestionada. Para solucionar esta situación, son necesarias varias medidas: La disminución de los términos de caducidad de las acciones contenciosas ordinarias; la disminución del  periodo  probatorio  y  de las pruebas practicadas dentro del mismo; el aumento de los gastos del proceso que debe sufragar el demandante para que se le tramite el proceso, y la imposición de costas para la parte vencida en el pleito; la transferencia de asuntos que actualmente están asigna­ dos a la jurisdicción contenciosa,  a la  jurisdicción  ordinaria  civil; la eliminación de acciones constitucionales mal diseñadas por el legislador, que no han tenido una eficacia real; la redistribución de competencias en las secciones del Tribunal Administrativo de Cundinamarca, para disminuir la carga laboral de las Secciones congestionadas; extensión de la perención en contra de las entidades públicas demandantes, cuando éstas no cumplen con sus car­ gas procesales; eliminación de la aprobación de las conciliaciones prejudiciales por parte de los tribunales administrativos, para que estas sean  aprobadas  en  sede administrativa.

Modified circular velocity law

Science.gov (United States)

Djeghloul, Nazim

2018-05-01

A modified circular velocity law is presented for a test body orbiting around a spherically symmetric mass. This law exhibits a distance scale parameter and allows to recover both usual Newtonian behaviour for lower distances and a constant velocity limit at large scale. Application to the Galaxy predicts the known behaviour and also leads to a galactic mass in accordance with the measured visible stellar mass so that additional dark matter inside the Galaxy can be avoided. It is also shown that this circular velocity law can be embedded in a geometrical description of spacetime within the standard general relativity framework upon relaxing the usual asymptotic flatness condition. This formulation allows to redefine the introduced Newtonian scale limit in term of the central mass exclusively. Moreover, a satisfactory answer to the galactic escape speed problem can be provided indicating the possibility that one can also get rid of dark matter halo outside the Galaxy.

Unleashing the Power of the Circular Economy

Energy Technology Data Exchange (ETDEWEB)

Kok, L.; Wurpel, G.; Ten Wolde, A. [IMSA Amsterdam, Amsterdam (Netherlands)

2013-04-15

The concept of circular economy is an economic and industrial system that focuses on the reusability of products and raw materials, reduces value destruction in the overall system and aims at value creation within each tier of the system. This report for Circle Economy (CE) outlines the general direction and concrete steps that must be taken to accomplish a breakthrough to a circular economy. It also provides a knowledge base behind the concept, connecting it to sustainability.

Molecular electron recollision dynamics in intense circularly polarized laser pulses

Science.gov (United States)

Bandrauk, André D.; Yuan, Kai-Jun

2018-04-01

Extreme UV and x-ray table top light sources based on high-order harmonic generation (HHG) are focused now on circular polarization for the generation of circularly polarized attosecond pulses as new tools for controlling electron dynamics, such as charge transfer and migration and the generation of attosecond quantum electron currents for ultrafast magneto-optics. A fundamental electron dynamical process in HHG is laser induced electron recollision with the parent ion, well established theoretically and experimentally for linear polarization. We discuss molecular electron recollision dynamics in circular polarization by theoretical analysis and numerical simulation. The control of the polarization of HHG with circularly polarized ionizing pulses is examined and it is shown that bichromatic circularly polarized pulses enhance recollision dynamics, rendering HHG more efficient, especially in molecules because of their nonspherical symmetry. The polarization of the harmonics is found to be dependent on the compatibility of the rotational symmetry of the net electric field created by combinations of bichromatic circularly polarized pulses with the dynamical symmetry of molecules. We show how the field and molecule symmetry influences the electron recollision trajectories by a time-frequency analysis of harmonics. The results, in principle, offer new unique controllable tools in the study of attosecond molecular electron dynamics.

Circular polarization observed in bioluminescence

NARCIS (Netherlands)

Wynberg, H.; Meijer, E.W.; Hummelen, J.C.; Dekkers, H.P.J.M.; Schippers, P.H.; Carlson, A.D.

1980-01-01

The left and right lanterns of live larvae of the fireflies Photuris lucicrescens and P. versicolor emitted circularly polarized light of opposite sense. A possible mechanism is discussed. [on SciFinder (R)

The potential of a circular economy in the Netherlands: summary report

NARCIS (Netherlands)

Bastein, T.; Roelofs, E.; Rietveld, E.; Hoogendoorn, A.

2013-01-01

For the Dutch Parliament, TNO has assessed the opportunities for a circular economy in The Netherlands. TNO estimates the value of a circular economy to be about 7.3 billion euro. The results and conclusions of the TNO-rapport ‘The potential of a circular economy in the Netherlands’ are sent to the

Circular braiding take-up speed generation using inverse kinematics

NARCIS (Netherlands)

van Ravenhorst, J.H.; Akkerman, Remko

2014-01-01

Circular overbraiding of composite preforms on complex mandrels currently lacks automatic generation of machine control data. To solve this limitation, an inverse kinematics-based procedure was designed and implemented for circular braiding machines with optional guide rings, resulting in a take-up

Generation of circular polarization of the cosmic microwave background

International Nuclear Information System (INIS)

Alexander, Stephon; Ochoa, Joseph; Kosowsky, Arthur

2009-01-01

The standard cosmological model, which includes only Compton scattering photon interactions at energy scales near recombination, results in zero primordial circular polarization of the cosmic microwave background. In this paper we consider a particular renormalizable and gauge-invariant standard model extension coupling photons to an external vector field via a Chern-Simons term, which arises as a radiative correction if gravitational torsion couples to fermions. We compute the transport equations for polarized photons from a Boltzmann-like equation, showing that such a coupling will source circular polarization of the microwave background. For the particular coupling considered here, the circular polarization effect is always negligible compared to the rotation of the linear polarization orientation, also derived using the same formalism. We note the possibility that limits on microwave background circular polarization may probe other photon interactions and related fundamental effects such as violations of Lorentz invariance.

The optimum circular field size for dental radiography with intraoral films

International Nuclear Information System (INIS)

van Straaten, F.J.; van Aken, J.

1982-01-01

Intraoral radiographs are often made with circular fields to irradiate the film, and in many instances these fields are much larger than the film. The feasibility of reducing a circular radiation field without increasing the probability of excessive cone cutting was evaluated clinically, and an optimum field size was determined. A circular radiation field 4.5 cm. at the tube end was found to minimize cone cutting and reduce the area of tissue irradiated by at least 44 percent. Findings suggest that current I.C.R.P. recommendations for a 6 to 7.5 cm. diameter circular field may be too liberal

Magnetic fields with photon beams: Use of circular current loops

International Nuclear Information System (INIS)

Jette, David

2001-01-01

Strong transverse magnetic fields can produce very large dose enhancements and reductions in localized regions of a patient under irradiation by a photon beam. Through EGS4 Monte Carlo simulations, we have examined the effects of applying a magnetic field produced by a pair of circular current loops to a photon beam penetrating a water phantom of finite thickness. We have indeed found very substantial localized dose enhancements, albeit with no corresponding dose reduction just distal to the region of dose enhancement. (However, dose reduction does occur near the distal end of the phantom.) We have also observed two phenomena to be concerned with, for this configuration: significant broadening of the penumbra close to the current loop, and narrowness of the enhanced dose region in a plane parallel to the planes of the loops. We have also examined the use of a single current loop to produce the magnetic field, and have found great asymmetry in the dose distribution; this asymmetry appears to make it impossible to treat with a single circular magnet a tumor of large dimension extending below the application surface

FROM CIRCULAR ECONOMY TO BLUE ECONOMY

Directory of Open Access Journals (Sweden)

Iustin-Emanuel, ALEXANDRU

2014-11-01

Full Text Available Addressing the subject of this essay is based on the background ideas generated by a new branch of science - Biomimicry. According to European Commissioner for the Environment, "Nature is the perfect model of circular economy". Therefore, by imitating nature, we are witnessing a process of cycle redesign: production-consumption-recycling. The authors present some reflections on the European Commission's decision to adopt after July 1, 2014 new measures concerning the development of more circular economies. Starting from the principles of Ecolonomy, which is based on the whole living paradigm, this paper argues for the development within each economy of entrepreneurial policies related to the Blue economy. In its turn, Blue economy is based on scientific analyses that identify the best solutions in a business. Thus, formation of social capital will lead to healthier and cheaper products, which will stimulate entrepreneurship. Blue economy is another way of thinking economic practice and is a new model of business design. It is a healthy, sustainable business, designed for people. In fact, it is the core of the whole living paradigm through which, towards 2020, circular economy will grow more and more.

Chemical detection of cysteine-rich circular petides in selected ...

African Journals Online (AJOL)

Cysteine-rich circular peptides (CRCs) comprise a large family of gene encoded and low molecular weight polypeptides that has recently engaged the attention of scientists. This class of peptides exhibit a continuous circular configuration and a cystine knot backbone, which defines their resilient nature-directed structural ...

15 CFR Supplement No. 2 to Part 748 - Unique Application and Submission Requirements

Science.gov (United States)

2010-01-01

... to the CNC unit for on-line processing of CAD data. Specify the make and model of the computer; (D..., and type of interpolation (linear, circular, and other); (E) Minimum programmable increment; (F) A... control board, including software/firmware for axis interpolation function and for any programmable...

The Circular Economy and the Leading European Retailers: A Research Note

Directory of Open Access Journals (Sweden)

Peter Jones

2018-03-01

Full Text Available The concept of the circular economy is gaining momentum in political and business thinking about the transition to a more sustainable future. EuroCommerce and the European Retail Round Table, for example, have argued that leading retailers are keen to play a leading role in shaping the circular economy within Europe. This exploratory research note outlines the characteristic features of the concept of the circular economy, provides some illustrations of how Europe’s leading retailers are publicly addressing circular economy approaches and offers some general reflections on the application of the concept within the retail sector of the economy. The findings reveal that almost 50% of the leading European retailers signalled a commitment to the circular economy and to the principles underpinning it and a number of them looked to evidence their commitment within their retail operations. That said the authors suggest that If Europe’s leading retailers’ public commitments to a more circular economy are to become a reality then they will not only need to effect a radical change in their current business models and that this will need to be accompanied by radical changes in consumers consumption behaviour. More contentiously, there must be concerns that the leading European retailers might effectively capture the concept of the circular economy to justify continuing economic growth.

Circularity bias in abusive head trauma studies could be diminished with a new ranking scale

DEFF Research Database (Denmark)

Högberg, Göran; Colville-Ebeling, Bonnie; Högberg, Ulf

2016-01-01

Causality in abusive head trauma has never been fully established and hence no gold standard exists for the diagnosis. Implications hereof include bias introduced by circular reasoning and a shift from a trustful doctor patient relationship to a distrustful one when the caregiver statement...

[Integrated evaluation of circular agriculture system: a life cycle perspective].

Science.gov (United States)

Liang, Long; Chen, Yuan-Quan; Gao, Wang-Sheng

2010-11-01

For the point of view that recycling economy system is one of ways to achieve the low-carbon economy, we have made an evaluation on a typical circular agriculture duck industry in Hunan Province, China, through improving the framework of life cycle assessment (LCA). The analysis indicated that the consumption of non-renewable resources, land and water were 48.629 MJ, 2.36 m2 and 1 321.41 kg, while the potential greenhouse gas (GHGs), acidification, eutrophication, human toxicity, freshwater ecotoxicity and terrestrial ecotoxicity were 11 543.26 g (CO2 eq), 52.36g (SO2eq), 25.83g (PO4eq), 1.26, 60.74 and 24.65 g (1,4-DCBeq), respectively. The potential damage of aquatic eutrophication, freshwater ecotoxicity and terrestrial ecotoxicity was more serious than that of GHGs. Main results were following: i. the circular agricultural chain promoted the principle of "moderate circulation", which based on the traditional production methods; ii. circular agriculture could not blindly pursue low carbon development. Instead, soil and biological carbon sequestration should be considered, in addition to reducing carbon emissions; iii. circular economy and circular agriculture should take other potential environmental impacts into account such as acidification, eutrophication and ecotoxicity,with the exception to carbon emissions,to developed integrated system assessment; iv. LCA could provide a comprehensive assessment of circular agriculture, and it was worth of further study.

PCDDB: the Protein Circular Dichroism Data Bank, a repository for circular dichroism spectral and metadata.

Science.gov (United States)

Whitmore, Lee; Woollett, Benjamin; Miles, Andrew John; Klose, D P; Janes, Robert W; Wallace, B A

2011-01-01

The Protein Circular Dichroism Data Bank (PCDDB) is a public repository that archives and freely distributes circular dichroism (CD) and synchrotron radiation CD (SRCD) spectral data and their associated experimental metadata. All entries undergo validation and curation procedures to ensure completeness, consistency and quality of the data included. A web-based interface enables users to browse and query sample types, sample conditions, experimental parameters and provides spectra in both graphical display format and as downloadable text files. The entries are linked, when appropriate, to primary sequence (UniProt) and structural (PDB) databases, as well as to secondary databases such as the Enzyme Commission functional classification database and the CATH fold classification database, as well as to literature citations. The PCDDB is available at: http://pcddb.cryst.bbk.ac.uk.

Role of Food Logistics Management in a circular economy

NARCIS (Netherlands)

Bloemhof-Ruwaard, J.M.; Groot, J.J.; Snels, J.C.M.A.

2016-01-01

In this paper we will discuss the role of food logistics management in a circular economy. Specific pillars in Circular Economy such as Closed Loop supply Chain management and Industrial Ecology will be discussed. Apart from a research agenda, we will provide exemplary cases in practice showing the

HBV-Specific shRNA is Capable of Reducing the Formation of Hepatitis B Virus Covalently Closed Circular DNA, but has No Effect on Established Covalently Closed Circular DNA in vitro

OpenAIRE

Starkey, Jason L.; Chiari, Estelle F.; Isom, Harriet C.

2009-01-01

Hepatitis B virus (HBV) covalently closed circular DNA (CCC DNA) is the source of HBV transcripts and persistence in chronically infected patients. The novel aspect of this study was to determine the effect of RNA interference (RNAi) on HBV CCC DNA when administered prior to establishment of HBV replication or during chronic HBV infection. HBV replication was initiated in HepG2 cells by transduction with HBV baculovirus. Subculture of HBV expressing HepG2 cells at 10 days post-transduction ge...

Entropic derivation of F=ma for circular motion

International Nuclear Information System (INIS)

Duncan, Michael; Myrzakulov, Ratbay; Singleton, Douglas

2011-01-01

We examine the entropic picture of Newton's second law for the case of circular motion. It is shown that one must make modifications to the derivation of F=ma due to a change in the effective Unruh temperature for circular motion. These modifications present a challenge to the entropic derivation of Newton's second law, but also open up the possibility to experimentally test and constrain this model for large centripetal accelerations.

Polarization variablity among Wolf-Rayet stars. IV. A complete lack of circular polarization in the optical continuum

International Nuclear Information System (INIS)

Robert, C.; Moffat, A.F.J.

1989-01-01

Quasi-simultaneous blue and red, broadband optical monitoring in linear and circular polarization and in intensity has been carried out over an interval of three weeks for several Wolf-Rayet stars that show relatively large Delta P variations in linear polarization. No significant varying Delta V component of circular polarization is detected in any of these stars. The lower upper limit Delta V/Delta P implies that the intrinsic linearly polarized light which does vary cannot be produced by electrons gyrating in a magnetic field, unless they are ultrarelativistic - a rather unlikely situation. The low mean circular polarization typically observed is probably interstellar in origin. Lack of periodicity in the observed variations of linear polarization implies that even weak magnetic field loops are unlikely to be involved in confining pockets of wind plasma. The observed linear polarization variations are related mainly to electron scattering. 25 refs

Circular RNA profiling reveals that circular RNAs from ANXA2 can be used as new biomarkers for multiple sclerosis.

Science.gov (United States)

Iparraguirre, Leire; Muñoz-Culla, Maider; Prada-Luengo, Iñigo; Castillo-Triviño, Tamara; Olascoaga, Javier; Otaegui, David

2017-09-15

Multiple sclerosis is an autoimmune disease, with higher prevalence in women, in whom the immune system is dysregulated. This dysregulation has been shown to correlate with changes in transcriptome expression as well as in gene-expression regulators, such as non-coding RNAs (e.g. microRNAs). Indeed, some of these have been suggested as biomarkers for multiple sclerosis even though few biomarkers have reached the clinical practice. Recently, a novel family of non-coding RNAs, circular RNAs, has emerged as a new player in the complex network of gene-expression regulation. MicroRNA regulation function through a 'sponge system' and a RNA splicing regulation function have been proposed for the circular RNAs. This regulating role together with their high stability in biofluids makes them seemingly good candidates as biomarkers. Given the dysregulation of both protein-coding and non-coding transcriptome that have been reported in multiple sclerosis patients, we hypothesised that circular RNA expression may also be altered. Therefore, we carried out expression profiling of 13.617 circular RNAs in peripheral blood leucocytes from multiple sclerosis patients and healthy controls finding 406 differentially expressed (P-value  1.5) and demonstrate after validation that, circ_0005402 and circ_0035560 are underexpressed in multiple sclerosis patients and could be used as biomarkers of the disease. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Success Factors of Sustainable Social Enterprises Through Circular Economy Perspective

Directory of Open Access Journals (Sweden)

Stratan Dumitru

2017-05-01

Full Text Available The scope of the research is to find out how social entrepreneurship operations can be modelled within existing business methods using circular economy principles. A literature review was undertaken in order to clarify and find out different opinions regarding circularity and social businesses models. Moreover, the author interviewed managers of different social mission organizations in order to find out the critical factors that determine the sustainability and performances of the organizations. Using the results of the field and desk research, the author suggests the following business model elements to be considered by social enterprises aiming to implement circular economy principles: Desired social and environment vision; Value proposition; Alignment of organizations to the strategy and acceleration of change through executive leadership implication; Financial sustainable perspective: a to increase financial resources and b to manage costs; Stakeholders perspective: a customers segments, b users, c employees, d community beneficiaries, e channels, f customer relationships, g Key partnerships; Internal process perspective: a processes necessary to use circular economy principles; b impact measurement and key activities; c internal and external communication; Resources perspective: a networks; b skills on circular principles and social impact; c information and technologies.`

Time can't be circular

CERN Multimedia

2003-01-01

"Delivering the Albert Einstein lecture at the Centre for Philosophy and Foundations of Science on Tuesday, Nobel Laureate Professor Gerard Hooft said that any notion of time can not be circular or have loops or multi dimensionality" (1/2 page).

Characteristics of circular features on comet 67P/Churyumov-Gerasimenko

Science.gov (United States)

Deller, J. F.; Güttler, C.; Tubiana, C.; Hofmann, M.; Sierks, H.

2017-09-01

Comet 67P/Churyumov-Gerasimenko shows a large variety of circular structures such as pits, elevated roundish features in Imhotep, and even a single occurrence of a plausible fresh impact crater. Imaging the pits in the Ma'at region, aiming to understand their structure and origin drove the design of the final descent trajectory of the Rosetta spacecraft. The high-resolution images obtained during the last mission phase allow us to study these pits as exemplary circular features. A complete catalogue of circular features gives us the possibility to compare and classify these structures systematically.

Linear versus circular polarization of head coils - comparison on phantom and in the clinic

International Nuclear Information System (INIS)

Schratter, M.; Kramer, J.; Prayer, L.; Wimberger, D.; Imhof, H.; Schmid, W.

1990-01-01

Two different head coils - one with linear polarization and the other with circular polarization - were compared under the same measurement conditions. Comparison was done on a phantom with waterfilled and gadolinium-filled pin-holes, as well as on anatomical MR images of 23 volunteers. In three volunteers the whole brain was examined while, in the remaining 20 volunteers the sella region or cerebellopontine angleregion was examined. Criteria for comparison were signal-to-noise ratio, background noise, and detail resolution (phantom), as well as subjective criteria - image sharpness, anatomical, contrast, and recognition of anatomical details -, evaluated on anatomical MR images by four radiologists independently of each other. The results show a significant improvement of signal-to-noise ratio, lower background noise and therefore marked improvement of images harpness, and moderate improvement in the recognition of anatomical details using the circular polarized head coil; as for as detail resolution and anatomical contrast were concerned, however, no significant difference was seen between the two coils. Major advantages of the circular, polarized head coil in clinical application are shorter measurement times (reduced number of acquisitions), as well as thinner slices without loss of signal-to-noise ratio. (orig.) [de

The Potential of Circular Economy in Sustainable Buildings

DEFF Research Database (Denmark)

Malabi Larsen, Leonora Charlotte; Birgisdottir, Harpa; Birkved, Morten

2018-01-01

benefits of designing the buildings concrete structure for disassembly, with the purpose of reuse, as well as to exemplify how circular economy can be applied in future building projects. Moreover, the paper aims at suggesting a more industry focused approach towards circular economy in order to seize...... the inherent potentials. As a result, it was found that recycling and energy recovery are the most common circular economy practices in the building industry, even though the economic and environmental benefits of reuse are believed to be much higher. This observation is supported by the findings of the case...... and glass, thereby enabling easier disassembly for both reuse and recycling. However, main challenges preventing the industry from seizing these potentials are identified as: focus on short term goals, complex supply chains, lack of collaboration between stakeholders and absence of a commonly agreed...

Slotted Circularly Polarized Microstrip Antenna for RFID Application

Directory of Open Access Journals (Sweden)

S. Kumar

2017-12-01

Full Text Available A single layer coaxial fed rectangular microstrip slotted antenna for circular polarization (CP is proposed for radio frequency identification (RFID application. Two triangular shaped slots and one rectangular slot along the diagonal axis of a square patch have been embedded. Due to slotted structure along the diagonal axis and less surface area, good quality of circular polarization has been obtained with the reduction in the size of microstrip antenna by 4.04 %. Circular polarization radiation performance has been studied by size and angle variation of diagonally slotted structures. The experimental result found for 10-dB return loss is 44 MHz with 10MHz of 3dB Axial Ratio (AR bandwidth respectively at the resonant frequency 910 MHz. The overall proposed antenna size including the ground plane is 80 mm x 80 mm x 4.572 mm.

Measurement of electron-spin transports in GaAs quantum wells using a transmission-grating-sampled circular dichroism absorption spectroscopy

International Nuclear Information System (INIS)

Yu, Hua-Liang; Fang, Shaoyin; Wen, Jinhui; Lai, Tianshu

2014-01-01

A transmission-grating-sampled circular dichroism absorption spectroscopy (TGS-CDAS) and its theoretical model are developed sensitively to measure decay dynamics of a transient spin grating (TSG). A binary transmission grating with the same period as TSG is set behind TSG. It allows only a same small part of each period in TSG measured by circular dichroism absorption effect of a probe. In this way, the zero average of spin-dependent effects measured over a whole period in TSG is avoided so that TGS-CDAS has a high sensitivity to spin evolution in TSG. Spin transport experiments are performed on GaAs/AlGaAs quantum wells. Experimental results prove the feasibility and reliability of TGS-CDAS

Frenkel-exciton decomposition analysis of circular dichroism and circularly polarized luminescence for multichromophoric systems.

Science.gov (United States)

Shiraogawa, Takafumi; Ehara, Masahiro; Jurinovich, Sandro; Cupellini, Lorenzo; Mennucci, Benedetta

2018-06-15

Recently, a method to calculate the absorption and circular dichroism (CD) spectra based on the exciton coupling has been developed. In this work, the method was utilized for the decomposition of the CD and circularly polarized luminescence (CPL) spectra of a multichromophoric system into chromophore contributions for recently developed through-space conjugated oligomers. The method which has been implemented using rotatory strength in the velocity form and therefore it is gauge-invariant, enables us to evaluate the contribution from each chromophoric unit and locally excited state to the CD and CPL spectra of the total system. The excitonic calculations suitably reproduce the full calculations of the system, as well as the experimental results. We demonstrate that the interactions between electric transition dipole moments of adjacent chromophoric units are crucial in the CD and CPL spectra of the multichromophoric systems, while the interactions between electric and magnetic transition dipole moments are not negligible. © 2018 Wiley Periodicals, Inc. © 2018 Wiley Periodicals, Inc.

Circular arc fuel plate stability experiments and analyses for the advanced neutron source

International Nuclear Information System (INIS)

Swinson, W.F.; Battiste, R.L.; Yahr, G.T.

1995-08-01

The thin fuel plates planned for the Advanced Neutron Source are to be cooled by forcing heavy water at high velocity, 25 m/s, through thin cooling channels on each side of each plate. Because the potential for structural failure of the plates is a design concern, considerable effort has been expended in assessing this potential. As part of this effort, experimental flow tests and analyses to evaluate the structural response of circular arc plates have been conducted, and the results are given in this report

Relationship between chromatin complexity and nuclear envelope circularity in hippocampal pyramidal neurons

International Nuclear Information System (INIS)

Pantic, Igor; Basailovic, Milos; Paunovic, Jovana; Pantic, Senka

2015-01-01

Highlights: •We analyzed chromatin structure and nuclear envelope of 200 hippocampal pyramidal neurons. •Fractal and GLCM mathematical parameters were calculated each chromatin structure. •Nuclear shape was quantified by calculating circularity of the nuclear envelope. •Circularity was in significant relationship with chromatin fractal dimension. •Strong correlation was detected between circularity and some GLCM parameters. -- Abstract: In this study we tested the existence and strength of the relationship between circularity of nuclear envelope and mathematical parameters of chromatin structure. Coronal sections of the brain were made in 10 male albino mice. The brain tissue was stained using a modification of Feulgen method for DNA visualization. A total of 200 hippocampal pyramidal neurons (20 per animal) were visualized using DEM 200 High-Speed Color CMOS Chip and Olympus CX21FS1 microscope. Circularity of the nuclear membrane was calculated in ImageJ (NIH, USA) after the nuclear segmentation, based on the freehand selection of the nuclear regions of interest. Circularity was determined from the values of area and perimeter. For each chromatin structure, using fractal and grey level co-occurrence matrix (GLCM) algorithms, we determined the values of fractal dimension, lacunarity, angular second moment, GLCM entropy, inverse difference moment, GLCM correlation, and GLCM contrast. It was found that circularity is in a significant correlation (p < 0.05) with fractal dimension as the main parameter of fractal complexity analysis. Also, circularity was in a very strong relationship (p < 0.001) with certain parameters of grey level co-occurrence matrix such as the angular second moment and GLCM correlation. This is the first study to indicate that nuclear shape is significantly related to mathematical parameters of higher chromatin organization. Also, it seems that circularity of the nuclear envelope is a good predictor of certain features of chromatin

Development of circular filters for active facilities

International Nuclear Information System (INIS)

Pratt, R.P.

1986-01-01

An assessment of problems associated with remote handling, changing and disposal of filters suggested that significant improvements to filtration systems could be made if circular geometries were adopted in place of conventional systems. Improved systems have been developed and are now available for a range of applications and air flow rates. Where primary filters are installed within the active cell or cave, circular filters incorporating a lip seal have been developed which enable the filters to be sealed into the facility without recourse to clamping. For smaller cells, a range of push-through filter change systems have been developed, the principal feature being that the filter is passed into the housing from the clean side, but transferred from the housing directly into the cell for subsequent disposal. For plant room applications, circular bag change canister systems have been developed which ease the sealing and bag change operation. Such systems have a rated air flow of up to 3000 m 3 /h whilst still allowing ultimate disposal via the 200 litre waste drum route without prior volume reduction of the filter inserts. (author)

Higgs measurement at $e^+e^-$ circular colliders

CERN Document Server

Ruan, Manqi

2016-01-01

Now that the mass of the Higgs boson is known, circular electron positron colliders, able to measure the properties of these particles with high accuracy, are receiving considerable attention. Design studies have been launched (i) at CERN with the Future Circular Colliders (FCC), of which an e+e- collider is a potential first step (FCC-ee, formerly caller TLEP) and (ii) in China with the Circular Electron Positron Collider (CEPC). Hosted in a tunnel of at least 50 km (CEPC) or 80-100 km (FCC), both projects can deliver very high luminosity from the Z peak to HZ threshold (CEPC) and even to the top pair threshold and above (FCC-ee). At the ZH production optimum, around 240 GeV, the FCC-ee (CEPC) will be able to deliver 10 (5) ab-1 integrated luminosity in 5 (10) years with 4 (2) interaction points: hence to produce millions of Higgs bosons through the Higgsstrahlung process and vector boson fusion processes. This sample opens the possibility of subper- cent precision absolute measurements of the Higgs boson co...

Higgs Measurement at e+e- Circular Colliders

CERN Document Server

Ruan, M

2014-01-01

Now that the mass of the Higgs boson is known, circular electron positron colliders, able to measure the properties of these particles with high accuracy, are receiving considerable attention. Design studies have been launched (i) at CERN with the Future Circular Colliders (FCC), of which an e+e- collider is a potential first step (FCC-ee, formerly caller TLEP) and (ii) in China with the Circular Electron Positron Collider (CEPC). Hosted in a tunnel of at least 50 km (CEPC) or 80-100 km (FCC), both projects can deliver very high luminosity from the Z peak to HZ threshold (CEPC) and even to the top pair threshold and above (FCC-ee). At the ZH production optimum, around 240 GeV, the FCC-ee (CEPC) will be able to deliver 10 (5) ab-1 integrated luminosity in 5 (10) years with 4 (2) interaction points: hence to produce millions of Higgs bosons through the Higgsstrahlung process and vector boson fusion processes. This sample opens the possibility of subper-cent precision absolute measurements of the Higgs boson cou...

Multi-band circular polarizer based on a twisted triple split-ring resonator

International Nuclear Information System (INIS)

Wu Song; Huang Xiao-Jun; Yang He-Lin; Xiao Bo-Xun; Jin Yan

2014-01-01

A multi-band circular polarizer using a twisted triple split-ring resonator (TSRR) is presented and studied numerically and experimentally. At four distinct resonant frequencies, the incident linearly polarized wave can be transformed into left/right-handed circularly polarized waves. Numerical simulation results show that a y-polarized wave can be converted into a right-handed circularly polarized wave at 5.738 GHz and 9.218 GHz, while a left-handed circularly polarized wave is produced at 7.292 GHz and 10.118 GHz. The experimental results are in agreement with the numerical results. The surface current distributions are investigated to illustrate the polarization transformation mechanism. Furthermore, the influences of the structure parameters of the circular polarizer on transmission spectra are discussed as well. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

Circular polarization observed in bioluminescence

NARCIS (Netherlands)

Wijnberg, Hans; Meijer, E.W.; Hummelen, J.C.; Dekkers, H.P.J.M.; Schippers, P.H.; Carlson, A.D.

1980-01-01

While investigating circular polarization in luminescence, and having found it in chemiluminescence, we have studied bioluminescence because it is such a widespread and dramatic natural phenomenon. We report here that left and right lanterns of live larvae of the fireflies, Photuris lucicrescens and

Soft x-ray circular dichroism of biomolecules

International Nuclear Information System (INIS)

Nakagawa, Kazumichi; Tanaka, Makoto; Agui, Akane

2005-01-01

We succeeded to observe natural circular dichroism NCD for biomolecules in soft X-ray region for the first time. Evaporated films of amino acids, phenylalanine (phe) and serine (ser) were prepared in vacuum with the thickness of about 300 nm. Measurement was carried out at the soft X-ray undulator beamline BL23SU of the Spring-8, where left- and right-circularly polarized light (LCPL and RCPL) was available from an APPLE-2 undulator. Difference spectra DA(hν) was plotted as a function of photon energy hν of soft X-ray to be the difference between absorption coefficient A L for LCPL and absorption coefficient A R for RCPL, namely, DA(hν) ≡ A L (hν) - A R (hν). Values of A L and A R were determined by means of the photoelectric drain current measurement. In the DA(hν) spectra for L-phe films, negative peak was observed at 407 eV. On the contrary, for D-phe films, positive peak was observed at 407 eV with the same magnitude but opposite sign. Moreover, no signal was observed for racemic phenylalanine (DL-phe). In the wavelength region of visible to ultraviolet, there is well-known general law in which NCD signals for D- and L-enantiomers are the same magnitude but opposite sign and racemic compound does not show NCD spectra. Characteristic features in DA(hν) spectra of the L-phe, D-phe and DL-phe were of good agreement with this well-known general law. Based on this good agreement, we concluded that peaks at 407 eV in the DA(hν) spectra are true NCD peaks. For ser films, we assigned peaks at 540 eV and 548 eV to be NCD peaks in the same manner. We hope that our first observation of NCD for biomolecules at soft X-ray region will open new science and technologies such as basic science including elucidation of fundamental mechanism of NCD and application to manipulate biomolecules using circularly polarized soft X-ray beams. (author)

Circular no. 166 F. on the licencing procedure for construction and operation of nuclear installations indicated in the Ministerial Decree of 4.1.1977 subject to the provisions of Section 55 of Decree no.185 of the President of the Republic of 13.2.1964

International Nuclear Information System (INIS)

1978-01-01

This 1978 Circular by the Minister of Industry, Commerce and Crafts lays down the licensing procedure to be complied with for construction and operation of nuclear installations, determined by a Ministerial Decree of 4 January 1977 subjecting certain installations to Section 55 of Presidential Decree no.185 of 13 February 1964. It lists the documents to be supplied by applicants for a licence and describes the technical enquiry to be undertaken by the Comitato Nazionale per l'Energia Nucleare (CNEN). (NEA) [fr

Forced vibrations of rotating circular cylindrical shells

International Nuclear Information System (INIS)

Igawa, Hirotaka; Maruyama, Yoshiyuki; Endo, Mitsuru

1995-01-01

Forced vibrations of rotating circular cylindrical shells are investigated. Basic equations, including the effect of initial stress due to rotation, are formulated by the finite-element method. The characteristic relations for finite elements are derived from the energy principle by considering the finite strain. The equations of motion can be separated into quasi-static and dynamic ones, i.e., the equations in the steady rotating state and those in the vibration state. Radial concentrated impulses are considered as the external dynamic force. The transient responses of circular cylindrical shells are numerically calculated under various boundary conditions and rotating speeds. (author)

17 CFR 230.253 - Offering circular.

Science.gov (United States)

2010-04-01

.... Repetition of information should be avoided; cross-referencing of information within the document is... COMPLETENESS OF ANY OFFERING CIRCULAR OR OTHER SELLING LITERATURE. THESE SECURITIES ARE OFFERED PURSUANT TO AN...

Wiimote Experiments: Circular Motion

Science.gov (United States)

Kouh, Minjoon; Holz, Danielle; Kawam, Alae; Lamont, Mary

2013-01-01

The advent of new sensor technologies can provide new ways of exploring fundamental physics. In this paper, we show how a Wiimote, which is a handheld remote controller for the Nintendo Wii video game system with an accelerometer, can be used to study the dynamics of circular motion with a very simple setup such as an old record player or a…

HPLC purification and re-evaluation of chemical identity of two circular bacteriocins, gassericin A and reutericin 6.

Science.gov (United States)

Arakawa, K; Kawai, Y; Ito, Y; Nakamura, K; Chujo, T; Nishimura, J; Kitazawa, H; Saito, T

2010-04-01

The study aimed for the complete purification and recharacterization of the highly hydrophobic circular bacteriocins, gassericin A and reutericin 6. Gassericin A and reutericin 6 were purified to homogeneity using previously described method and reverse-phase HPLC with an octyl column and eluents of aqueous acetonitrile and 2-propanol. Mass analysis, N-terminal sequencing and bacteriocin assay of the HPLC-purified bacteriocins showed the two bacteriocins had identical seamless circular structures with the same m/z value (5651) of [M + H](+) and both had the same specific activity. D/L-amino acid composition analysis using two distinct methods with the chiral fluorescent derivatization reagents (+)-1-(9-fluorenyl)ethyl chloroformate and O-phthalaldehyde/N-acetyl-L-cystein revealed neither gassericin A nor reutericin 6 contained D-alanine residues contrary to our previous results. Purified gassericin A and reutericin 6 are chemically identical circular molecules containing no D-alanine residues. The HPLC conditions developed in this study will facilitate advanced purification and correct characterization of other highly hydrophobic bacteriocins.

A MEMS and agile optics-based dual-mode variable optical power splitter with no moving parts

Science.gov (United States)

Khwaja, Tariq S.; Suleman, Hamid; Reza, Syed Azer

2017-06-01

In this paper, we present a novel design of an optical power splitter. Owing to the inherent variable power split ratios that the proposed design delivers, it is ideal for use in communications, sensing and signal processing applications where variable power splitting is often quintessential. The proposed power splitter module is dual mode as it combines the use of a Micro-Electro-Mechanical Systems (MEMS) based Digital Micro-mirror Device (DMD) and an Electronically Controlled Tunable Lens (ECTL) to split the power of an input optical signal between two output ports - the designated port and the surplus port. The use of a reflective Digital Spatial Light Modulator (DSLM) such as the DMD provides a motion-free digital control of the split ratio between the two output ports. Although the digital step between two possible successive split ratios can be fairly minimal with the use of a high resolution DMD but it is a challenge to correctly ascertain the exact image pattern on the DMD to obtain any desired specific split ratio. To counter this challenge, we propose the synchronized use of a circular pattern on the DMD, which serves as a circular clear aperture with a tunable radius, and an ECTL. The radius of the circular pattern on the DMD provides a digital control of the split ratio between the two ports whereas the ECTL, depending on its controller, can provide either an analog or a digital control by altering the beam radius which is incident at the DMD circular pattern. The radius of the circular pattern on the DMD can be minimally changed by one micro-pixel thickness. Setting the radius of the circular pattern on the DMD to an appropriate value provides the closest "ball-park" split ratio whereas further tuning the ECTL aids in slightly altering from this digitally set value to obtain the exact desired split ratio in-between any two digitally-set successive split ratios that correspond to any clear aperture radius of the DMD pattern and its incremental minimal

140 CIRCULAR INTERACTION BETWEEN LINGUISTIC ...

African Journals Online (AJOL)

economy. Although a country or administrative district should have one or more official languages for obvious reasons, Nelde (1991) proposes that the ... circular interaction between linguistic departments and language departments. Finding an answer to' Plato's abovementioned problem entails that as many languages as ...

Filtered backprojection for modifying the impulse response of circular tomosynthesis

International Nuclear Information System (INIS)

Stevens, Grant M.; Fahrig, Rebecca; Pelc, Norbert J.

2001-01-01

A filtering technique has been developed to modify the three-dimensional impulse response of circular motion tomosynthesis to allow the generation of images whose appearance is like those of some other imaging geometries. In particular, this technique can reconstruct images with a blurring function which is more homogeneous for off-focal plane objects than that from circular tomosynthesis. In this paper, we describe the filtering process, and demonstrate the ability to alter the impulse response in circular motion tomosynthesis from a ring to a disk. This filtering may be desirable because the blurred out-of-plane objects appear less structured

Evaluation of the resin cement thicknesses and push-out bond strengths of circular and oval fiber posts in oval-shapes canals

Science.gov (United States)

Er, Özgür; Kılıç, Kerem; Kılınç, Halil İbrahim; Sağsen, Burak

2015-01-01

PURPOSE The aim of this study was to evaluate whether the push-out bond strength varies between oval and circular fiber posts, and to examine the effect on the resin cement thicknesses around the posts. MATERIALS AND METHODS Eighteen mandibular premolar roots were separated into two groups for oval and circular fiber posts systems. Post spaces were prepared and fiber posts were luted to the post spaces. Roots were cut horizontally to produce 1-mm-thick specimens. Resin cement thicknesses were determined with a metallographic optical microscope and push-out tests were done. RESULTS No significant differences were observed in terms of push-out bond strength between the oval and circular fiber posts (P>.05) The resin cement thicknesses of the oval posts were greater than those of the circular posts group in the coronal, middle and apical specimens (P<.05). CONCLUSION In the light of these results, it can be stated that resin cement thickness does not affect the push-out bond strength. PMID:25722832

Piezoelectric shunt damping of a circular saw blade with autonomous power supply for noise and vibration reduction

Science.gov (United States)

Pohl, Martin; Rose, Michael

2016-01-01

Circular saws are widespread tools for machining metal, wood or even ceramics. Due to the thin blade and excitation by the workpiece contact of the cutting edges, circular saws are prone to vibration and intense noise emission. Damping the blade will lower the hearing protection requirements of the users and possibly increase precision. Therefore a new damping concept for circular saw blades is presented in this paper. It is based on negative capacitance shunted piezoelectric transducers which are applied to the saw blade core. The required energy for the electronics is harvested from the rotation by a generator, so that no change of the machine tool is required. All components are integrated into an autonomous saw tool. Finally, the system is experimentally investigated without rotation, in idling and in cutting condition in a circular saw test stand in the Institute for Machine Tools and Production Engineering (IWF) at TU Braunschweig. The experimental investigation shows a good reduction of the vibration amplitude over a wide frequency range in the non-rotating condition. When rotating, the damping effect is lower and limited to some narrow frequency bands. The proposed reason for the reduced damping effect in rotating condition consists in the saturation of the electronic circuits due to the limited supply voltage capabilities.

Circularly Polarized Low-Profile Antenna for Radiating Parallel to Ground Plane for RFID Reader Applications

Directory of Open Access Journals (Sweden)

Kittima Lertsakwimarn

2013-01-01

Full Text Available This paper presents a low-profile printed antenna with double U-shaped arms radiating circular polarization for the UHF RFID readers. The proposed antenna consists of double U-shaped strip structures and a capacitive feeding line to generate circular polarization. A part of the U-shaped arms is bent by 90° to direct the main beam parallel to the ground plane. From the results, -10 dB |S11| and 3 dB axial ratio of the antenna cover a typical UHF RFID band from 920 MHz to 925 MHz. The bidirectional beam is obtained with the maximum gain of 1.8 dBic in the parallel direction to the ground plane at the 925 MHz. The overall size of the proposed antenna including ground plane is 107 mm × 57 mm × 12.8 mm (0.33λ0 × 0.17λ0 × 0.04λ0.

Evaluation of circularity error in drilling of syntactic foam composites

Science.gov (United States)

Ashrith H., S.; Doddamani, Mrityunjay; Gaitonde, Vinayak

2018-04-01

Syntactic foams are widely used in structural applications of automobiles, aircrafts and underwater vehicles due to their lightweight properties combined with high compression strength and low moisture absorption. Structural application requires drilling of holes for assembly purpose. In this investigation response surface methodology based mathematical models are used to analyze the effects of cutting speed, feed, drill diameter and filler content on circularity error both at entry and exit level in drilling of glass microballoon reinforced epoxy syntactic foam. Experiments are conducted based on full factorial design using solid coated tungsten carbide twist drills. The parametric analysis reveals that circularity error is highly influenced by drill diameter followed by spindle speed at the entry and exit level. Parametric analysis also reveals that increasing filler content decreases circularity error by 13.65 and 11.96% respectively at entry and exit levels. Average circularity error at the entry level is found to be 23.73% higher than at the exit level.

Circular revisit orbits design for responsive mission over a single target

Science.gov (United States)

Li, Taibo; Xiang, Junhua; Wang, Zhaokui; Zhang, Yulin

2016-10-01

The responsive orbits play a key role in addressing the mission of Operationally Responsive Space (ORS) because of their capabilities. These capabilities are usually focused on supporting specific targets as opposed to providing global coverage. One subtype of responsive orbits is repeat coverage orbit which is nearly circular in most remote sensing applications. This paper deals with a special kind of repeating ground track orbit, referred to as circular revisit orbit. Different from traditional repeat coverage orbits, a satellite on circular revisit orbit can visit a target site at both the ascending and descending stages in one revisit cycle. This typology of trajectory allows a halving of the traditional revisit time and does a favor to get useful information for responsive applications. However the previous reported numerical methods in some references often cost lots of computation or fail to obtain such orbits. To overcome this difficulty, an analytical method to determine the existence conditions of the solutions to revisit orbits is presented in this paper. To this end, the mathematical model of circular revisit orbit is established under the central gravity model and the J2 perturbation. A constraint function of the circular revisit orbit is introduced, and the monotonicity of that function has been studied. The existent conditions and the number of such orbits are naturally worked out. Taking the launch cost into consideration, optimal design model of circular revisit orbit is established to achieve a best orbit which visits a target twice a day in the morning and in the afternoon respectively for several days. The result shows that it is effective to apply circular revisit orbits in responsive application such as reconnoiter of natural disaster.

Circular induction accelerator for borehole logging

International Nuclear Information System (INIS)

Chen, F.K.; Bertozzi, W.; Corris, G.W.; Diamond, W.; Doucet, J.A.; Schweitzer, J.S.

1992-01-01

This patent describes a downhole logging sonde adapted to be moved through a borehole, a source of gamma rays in the sonde for irradiating earth formations traversed by the borehole, one or more gamma ray detectors for detecting gamma rays scattered back to the sonde from the irradiated earth formations, and means for transmitting signals representative of the detected gamma rays to the earth's surface for processing. This patent describes improvement in the gamma ray source comprises a magnetic induction particle accelerator, including: a magnetic circuit having a field magnet, generally circular opposed pole pieces, and a core magnet metal ions from the group consisting of Mn, Zn and Ni; an excitation circuit including a field coil surrounding the field magnet and the core magnet and a core coil surrounding the central axially leg of the core magnet; an annular acceleration chamber interposed between the pole pieces; means for applying time-varying acceleration voltage pulses across the primary excitation circuit; means for injecting charged particles into orbit within the acceleration chamber; means for compressing the particle orbits to trap particles within generally circular orbits within the acceleration chamber; means for generating a particle accelerating magnetic flux in the magnetic circuit; and means for ejecting charged particles from the generally circular orbits and into contact with a target to produce gamma ray photons

Application of circular polarized synchrotron radiation

International Nuclear Information System (INIS)

Miyahara, Tsuneaki; Kawata, Hiroshi

1988-03-01

The idea of using the polarizing property of light for physical experiment by controlling it variously has been known from old time, and the Faraday effect and the research by polarizing microscopy are its examples. The light emitted from the electron orbit of an accelerator has the different polarizing characteristics from those of the light of a laboratory light source, and as far as observing it within the electron orbit plane, it becomes linearly polarized light. By utilizing this property well, research is carried out at present in synchrotron experimental facilities. Recently, the technology related to the insert type light cources using permanent magnets has advanced remarkably, and circular polarized light has become to be producible. If the light like this can be obtained with the energy not only in far ultraviolet region but also to x-ray region at high luminance, new possibility should open. At the stage that the design of an insert type light source was finished, and its manufacture was started, the research on the method of evaluating the degree of circular polarization and the research on the utilization of circular polarized synchrotron radiation are earnestly carried out. In this report, the results of researches presented at the study meeting are summarized. Moreover, the design and manufacture of the beam lines for exclusive use will be carried out. (Kako, I.)

Staff Rules & Regulations – modification No. 2 to the 11th Edition

CERN Multimedia

HR Department

2008-01-01

In June 2008, the Finance Committee and the Council approved the following amendments to the Staff Rules and Regulations:Chapter II, Conditions of Employment and Association, Section 4 (Leave): page 26 has been amended - with effect from 1 July 2008;Chapter III, Working Conditions, Section 1 (Working Hours): pages 30 to 32 have been amended and pages 33 and 34 have been deleted – with effect from 1 July 2008. Modification No. 2 is available from departmental secretariats (paper copies), or from the HR Department’s intranet site. In accordance with the above-mentioned amendments, the deleted parts of Chapter III will appear in the relevant administrative circulars. Until the revision of the latter (currently in process) is completed, the deleted parts of Chapter III continue to apply in accordance with transition measures decided by the Director-General. Please note that modification No. 1, concerning amendments approved by the Council in June 2007 to Annexes A 1 and corr...

Dynamic ASXL1 Exon Skipping and Alternative Circular Splicing in Single Human Cells.

Directory of Open Access Journals (Sweden)

Winston Koh

Full Text Available Circular RNAs comprise a poorly understood new class of noncoding RNA. In this study, we used a combination of targeted deletion, high-resolution splicing detection, and single-cell sequencing to deeply probe ASXL1 circular splicing. We found that efficient circular splicing required the canonical transcriptional start site and inverted AluSx elements. Sequencing-based interrogation of isoforms after ASXL1 overexpression identified promiscuous linear splicing between all exons, with the two most abundant non-canonical linear products skipping the exons that produced the circular isoforms. Single-cell sequencing revealed a strong preference for either the linear or circular ASXL1 isoforms in each cell, and found the predominant exon skipping product is frequently co-expressed with its reciprocal circular isoform. Finally, absolute quantification of ASXL1 isoforms confirmed our findings and suggests that standard methods overestimate circRNA abundance. Taken together, these data reveal a dynamic new view of circRNA genesis, providing additional framework for studying their roles in cellular biology.

Product design and business model strategies for a circular economy

NARCIS (Netherlands)

Bocken, N.M.P.; de Pauw, I.C.; Bakker, C.A.; van der Grinten, B.

The transition within business from a linear to a circular economy brings with it a range of practical challenges for companies. The following question is addressed: What are the product design and business model strategies for
companies that want to move to a circular economy model? This paper

Interactions of circular Rydberg atoms with charged particles

International Nuclear Information System (INIS)

Wang, J.

1994-01-01

Recent progress in experimental cross-field techniques has made it possible to produce oriented Rydberg atoms of any angular momentum l within a given n manifold. The largest angular momentum state l max = n - 1 of a given n manifold is of particular interest because of its semiclassical properties for n much-gt 1. The corresponding classical Kepler orbit is circular with highly localized phase space distribution. The circular Rydberg atoms afford the opportunity to study various interactions in the semiclassical regime. The authors report electron capture from circular Rydberg atoms by protons and positrons at speeds comparable to the electron orbital speed. They find orientation dependent, novel peak structures for both protons and positrons in the angular scattering of the particles. The structures may be understood in terms of quasi Thomas double scattering mechanism for capture. Other related aspects including final state population and orientation indulged scattering asymmetry will also be discussed

Architectural Surfaces and Structures from Circular Arcs

KAUST Repository

Shi, Ling

2013-12-01

In recent decades, the popularity of freeform shapes in contemporary architecture poses new challenges to digital design. One of them is the process of rationalization, i.e. to make freeform skins or structures affordable to manufacture, which draws the most attention from geometry researchers. In this thesis, we aim to realize this process with simple geometric primitives, circular arcs. We investigate architectural surfaces and structures consisting of circular arcs. Our focus is lying on how to employ them nicely and repetitively in architectural design, in order to decrease the cost in manufacturing. Firstly, we study Darboux cyclides, which are algebraic surfaces of order ≤ 4. We provide a computational tool to identify all families of circles on a given cyclide based on the spherical model of M ̈obius geometry. Practical ways to design cyclide patches that pass through certain inputs are presented. In particular, certain triples of circle families on Darboux cyclides may be suitably arranged as 3-webs. We provide a complete classification of all possible 3-webs of circles on Darboux cyclides. We then investigate the circular arc snakes, which are smooth sequences of circu- lar arcs. We evolve the snakes such that their curvature, as a function of arc length, remains unchanged. The evolution of snakes is utilized to approximate given surfaces by circular arcs or to generated freeform shapes, and it is realized by a 2-step pro- cess. More interestingly, certain 6-arc snake with boundary constraints can produce a smooth self motion, which can be employed to build flexible structures. Another challenging topic is approximating smooth freeform skins with simple panels. We contribute to this problem area by approximating a negatively-curved 5 surface with a smooth union of rational bilinear patches. We provide a proof for vertex consistency of hyperbolic nets using the CAGD approach of the rational B ́ezier form. Moreover, we use Darboux transformations for the

Absorbed Power Minimization in Cellular Users with Circular Antenna Arrays

Science.gov (United States)

Christofilakis, Vasilis; Votis, Constantinos; Tatsis, Giorgos; Raptis, Vasilis; Kostarakis, Panos

2010-01-01

Nowadays electromagnetic pollution of non ionizing radiation generated by cellular phones concerns millions of people. In this paper the use of circular antenna array as a means of minimizing the absorbed power by cellular phone users is introduced. In particular, the different characteristics of radiation patterns produced by a helical conventional antenna used in mobile phones operating at 900 MHz and those produced by a circular antenna array, hypothetically used in the same mobile phones, are in detail examined. Furthermore, the percentage of decrement of the power absorbed in the head as a function of direction of arrival is estimated for the circular antenna array.

Children's success at detecting circular explanations and their interest in future learning.

Science.gov (United States)

Mills, Candice M; Danovitch, Judith H; Rowles, Sydney P; Campbell, Ian L

2017-10-01

These studies explore elementary-school-aged children's ability to evaluate circular explanations and whether they respond to receiving weak explanations by expressing interest in additional learning. In the first study, 6-, 8-, and 10-year-olds (n = 53) heard why questions about unfamiliar animals. For each question, they rated the quality of single explanations and later selected the best explanation between pairs of circular and noncircular explanations. When judging single explanations, 8- and 10-year-olds, and to some extent 6-year-olds, provided higher ratings for noncircular explanations compared to circular ones. When selecting between pairs of explanations, all age groups preferred noncircular explanations to circular ones, but older children did so more consistently than 6-year-olds. Children who recognized the weakness of the single circular explanations were more interested in receiving additional information about the question topics. In Study 2, all three age groups (n = 87) provided higher ratings for noncircular explanations compared to circular ones when listening to responses to how questions, but older children showed a greater distinction in their ratings than 6-year-olds. Moreover, the link between recognizing circular explanations as weak and interest in future learning could not be accounted for solely by individual differences in verbal intelligence. These findings illustrate the developmental trajectory of explanation evaluation and support that recognition of weak explanations is linked to interest in future learning across the elementary years. Implications for education are discussed.

Behaviour of a stiffened circular slab

International Nuclear Information System (INIS)

Kulkarni, M.G.; Subramanian, K.V.

1975-01-01

Configuration of intake structure for cooling water system for Madras Atomic Power Project was studied on a hydraulic model and it was recommended to provide a circular slab in the structure to give directional property to the inflow and reduce air entrainment. This slab, as indicated by hydraulic model tests was required to withstand hydrodynamic pressures of the order of 10T/m 2 due to breaking waves of about 6 m height. Analysis of this circular cover slab, Stiffened by radial and circumferential beams, carried with the help of an analysis based on grid idealisation is presented. Results of approximate design analysis to assess behaviour of radial stiffener have been compared. Actual design is based on judgement of actual degree of fixity possessed by the supports or restraints. (author)

Straight, conic and circular fringes in single interferogram

International Nuclear Information System (INIS)

Rajkumar

2015-01-01

Interferometry is an important part of optics courses taught at the undergraduate level in universities throughout the world. It is used to explain to students the wave nature of light and is also used to measure parameters like length, refractive index, thickness of test samples and wavelength of light source, etc. The shape of interference fringes (linear, conic or circular) gives vital information about the interfering wavefronts and is used for firsthand visual inspection in optical shop testing and other applications of scientific and engineering importance. The present work describes a simple laboratory technique to generate fringes with different shapes in a single interferogram. This is achieved by using our diffraction-Lloyd mirror interferometer where two portions of the diffracted field are superimposed to generate the interference fringes. The technique is quite helpful in explaining the role of source orientation on the shape of interference fringes to students. (paper)

static analysis of circular cylindrical shell under hydrostatic and ring

African Journals Online (AJOL)

DEPT OF AGRICULTURAL ENGINEERING

(Golzan et al, 2008). Circular cylindrical shells are used in a large variety of civil engineering structures, e.g. off-shore platforms, chimneys, silos, pipelines, bridge arches or wind turbine towers (Winterstetter et al, 2002). This work is concerned with the analysis of circular cylindri- cal shell subjected to hydrostatic pressure in.

Efecto de la rugosidad del terreno en las secciones sísmicas: modelamiento por elementos finitos

Directory of Open Access Journals (Sweden)

Quintana Robinson

2002-08-01

Full Text Available

The foothills areas are characterized by low velocity shallow layers and rugged topopgraphy. Inside these stratas a coherent noise named back scattering is produced, that noise overlaps the waves comming from the deeper reflectors. In seismic sections of the colombian foothills this signal is observed, obscuring the subsurface image. A method to attenuate this signal is presented in this paper, the approach is based in the prediction of this noise and the posterior remotion from the seismic records. The shallow layer response is simulated through the numerical modeling in finite elements of the acustic wave propagation in a subsurface model. Lately, the shallow layer response is subtracted trace by trace from the synthetic record, getting a high noise's attenuation in the shot. We present results obtained by synthetic data modeling.

Las zonas de piedemonte se caracterizan por las capas someras de baja velocidad y poria topografía rugosa. En esos estratos se produce un ruido coherente lIamado backscattering que apantalla las ondas que provienen de los retlectores profundos. Esta señal se observa en las secciones sísmicas del piedemonte colombiano, oscureciendo la imagen del subsuelo. Para atenuar esta señal, se presenta en este artículo un método basado en la predicción de dicho ruido y su posterior remoción de los registros. Para ello se simula la respuesta de la capa somera mediante el modelamiento numérico en elementos finitos de la propagación de la onda acústica en un modelo del subsuelo. Posteriormente, esta respuesta se sustrae traza por traza del registro sintético, logrando una atenuaci

Circularly polarized antennas

CERN Document Server

Gao, Steven; Zhu, Fuguo

2013-01-01

This book presents a comprehensive insight into the design techniques for different types of CP antenna elements and arrays In this book, the authors address a broad range of topics on circularly polarized (CP) antennas. Firstly, it introduces to the reader basic principles, design techniques and characteristics of various types of CP antennas, such as CP patch antennas, CP helix antennas, quadrifilar helix antennas (QHA), printed quadrifilar helix antennas (PQHA), spiral antenna, CP slot antennas, CP dielectric resonator antennas, loop antennas, crossed dipoles, monopoles and CP horns. Adva

Pull-in instability tuning in imperfect nonlinear circular microplates under electrostatic actuation

Energy Technology Data Exchange (ETDEWEB)

Jallouli, A.; Kacem, N., E-mail: najib.kacem@univ-fcomte.fr; Bourbon, G.; Le Moal, P.; Walter, V.; Lardies, J.

2016-12-01

Highlights: • Dynamic range improvement of electrostatically actuated circular microplates. • Pull-in instability tuning based on geometric nonlinearity and imperfections. • Predictive computational model for the nonlinear behavior of circular microplates. - Abstract: Dynamic range improvement based on geometric nonlinearity and initial deflection is demonstrated with imperfect circular microplates under electrostatic actuation. Depending on design parameters, we prove how the von Kármán nonlinearity and the plate imperfections lead to a significant delay in pull-in occurrence. These promising results open the way towards an accurate identification of static parameters of circular microplates and the development of a predictive model for the nonlinear dynamics of imperfect capacitive micromachined ultrasonic transducers.

Beam steering for circular switched parasitic arrays using a combinational approach

CSIR Research Space (South Africa)

Mofolo, ROM

2011-09-01

Full Text Available In this paper, the authors present a method of electronic beam steering for circular switched parasitic array (SPA) antennas. In circular SPA antennas, one achieves azimuth beam steering by open-circuiting and short-circuiting different parasitic...

Análise da aderência do disclosure da gestão de riscos pelas instituições financeiras à circular Bacen 3.477

Directory of Open Access Journals (Sweden)

Mônica Campos Torres

2013-01-01

Full Text Available Banco Central de Brasil emitió la Circular nº. 3.477/09 que establece la obligación de divulgar la información relativa a la gestión de riesgos, al Capital de Solvencia Obligatorio y al Patrimonio de Referencia. Este estudio evalúa el nivel de divulgación de estas informaciones por parte de las instituciones financieras a la luz de las directrices de la circular mencionada. Los resultados muestran que sólo el 49,5% de las instituciones dio a conocer las informaciones requeridas por la circular. El tamaño, el nivel de exposición a los derivados financieros y el índice de apalancamiento fueron las variables que presentaron una relación estadísticamente significativa, con una relación negativa de esta última variable.

Dynamic Response of Underground Circular Lining Tunnels Subjected to Incident P Waves

Directory of Open Access Journals (Sweden)

Hua Xu

2014-01-01

Full Text Available Dynamic stress concentration in tunnels and underground structures during earthquakes often leads to serious structural damage. A series solution of wave equation for dynamic response of underground circular lining tunnels subjected to incident plane P waves is presented by Fourier-Bessel series expansion method in this paper. The deformation and stress fields of the whole medium of surrounding rock and tunnel were obtained by solving the equations of seismic wave propagation in an elastic half space. Based on the assumption of a large circular arc, a series of solutions for dynamic stress were deduced by using a wave function expansion approach for a circular lining tunnel in an elastic half space rock medium subjected to incident plane P waves. Then, the dynamic response of the circular lining tunnel was obtained by solving a series of algebraic equations after imposing its boundary conditions for displacement and stress of the circular lining tunnel. The effects of different factors on circular lining rock tunnels, including incident frequency, incident angle, buried depth, rock conditions, and lining stiffness, were derived and several application examples are presented. The results may provide a good reference for studies on the dynamic response and aseismic design of tunnels and underground structures.

CSA: An efficient algorithm to improve circular DNA multiple alignment

Directory of Open Access Journals (Sweden)

Pereira Luísa

2009-07-01

Full Text Available Abstract Background The comparison of homologous sequences from different species is an essential approach to reconstruct the evolutionary history of species and of the genes they harbour in their genomes. Several complete mitochondrial and nuclear genomes are now available, increasing the importance of using multiple sequence alignment algorithms in comparative genomics. MtDNA has long been used in phylogenetic analysis and errors in the alignments can lead to errors in the interpretation of evolutionary information. Although a large number of multiple sequence alignment algorithms have been proposed to date, they all deal with linear DNA and cannot handle directly circular DNA. Researchers interested in aligning circular DNA sequences must first rotate them to the "right" place using an essentially manual process, before they can use multiple sequence alignment tools. Results In this paper we propose an efficient algorithm that identifies the most interesting region to cut circular genomes in order to improve phylogenetic analysis when using standard multiple sequence alignment algorithms. This algorithm identifies the largest chain of non-repeated longest subsequences common to a set of circular mitochondrial DNA sequences. All the sequences are then rotated and made linear for multiple alignment purposes. To evaluate the effectiveness of this new tool, three different sets of mitochondrial DNA sequences were considered. Other tests considering randomly rotated sequences were also performed. The software package Arlequin was used to evaluate the standard genetic measures of the alignments obtained with and without the use of the CSA algorithm with two well known multiple alignment algorithms, the CLUSTALW and the MAVID tools, and also the visualization tool SinicView. Conclusion The results show that a circularization and rotation pre-processing step significantly improves the efficiency of public available multiple sequence alignment

Zero-point field in a circular-motion frame

International Nuclear Information System (INIS)

Kim, S.K.; Soh, K.S.; Yee, J.H.

1987-01-01

The energy spectrum of zero-point fields of a massless scalar field observed by a detector in circular motion is studied by analyzing the Wightman function. It is shown to be quite different from the Planck spectrum which would have been expected from the result of a uniformly accelerated detector. In a nonrelativistic limit zero-point fields with frequencies only up to the first harmonics of the circular-motion frequency contribute dominantly. In an extremely relativistic case the energy spectrum is dominated by a particular pole in the complex proper-time plane

Magnetic field, inductance of circular coil and solenoids

International Nuclear Information System (INIS)

Ramirez Hoyos, P.; Barbero Garcia, A.J.; Mafe Matoses, S.

1995-01-01

The self-inductance of a current-carrying circular coil and the mutual inductances of the Helmholtz coils and coil-sole-noid systems have been measured and calculated theoretically. The experiments and the required equipment are suited to an undergraduate laboratory. The theoretical calculation involve the use of simple numerical integration methods for evaluating the magnetic field of the circular coil and the inductances. The calculated values agree with the measurements within the experimental error. The material presented can be proposed to the students as a laboratory project. (Author) 7 refs

Thermal performance in circular tube fitted with coiled square wires

International Nuclear Information System (INIS)

Promvonge, Pongjet

2008-01-01

The effects of wires with square cross section forming a coil used as a turbulator on the heat transfer and turbulent flow friction characteristics in a uniform heat flux, circular tube are experimentally investigated in the present work. The experiments are performed for flows with Reynolds numbers ranging from 5000 to 25,000. Two different spring coiled wire pitches are introduced. The results are also compared with those obtained from using a typical coiled circular wire, apart from the smooth tube. The experimental results reveal that the use of coiled square wire turbulators leads to a considerable increase in heat transfer and friction loss over those of a smooth wall tube. The Nusselt number increases with the rise of Reynolds number and the reduction of pitch for both circular and square wire coils. The coiled square wire provides higher heat transfer than the circular one under the same conditions. Also, performance evaluation criteria to assess the real benefits in using both coil wires of the enhanced tube are determined

Risk management of hazardous substances in a circular economy.

Science.gov (United States)

Bodar, Charles; Spijker, Job; Lijzen, Johannes; Waaijers-van der Loop, Susanne; Luit, Richard; Heugens, Evelyn; Janssen, Martien; Wassenaar, Pim; Traas, Theo

2018-04-15

The ambitions for a circular economy are high and unambiguous, but day-to-day experience shows that the transition still has many difficulties to overcome. One of the current hurdles is the presence of hazardous substances in waste streams that enter or re-enter into the environment or the technosphere. The key question is: do we have the appropriate risk management tools to control any risks that might arise from the re-using and recycling of materials? We present some recent cases that illustrate current practice and complexity in the risk management of newly-formed circular economy chains. We also highlight how separate legal frameworks are still disconnected from each other in these cases, and how circular economy initiatives interlink with the European REACH regulation. Furthermore, we introduce a novel scheme describing how to decide whether a(n)(additional) risk assessment is necessary with regard to the re-use of materials containing hazardous substances. Finally, we present our initial views on new concepts for the fundamental integration of sustainability and safety aspects. These concepts should be the building blocks for the near future shifts in both policy frameworks and voluntary initiatives that support a sound circular economy transition. Copyright © 2018 Elsevier Ltd. All rights reserved.

Perturbation approach to design of circularly polarised microstrip antennas

Science.gov (United States)

Lo, Y. T.; Richards, W. F.

1981-05-01

One of the most interesting applications of microstrip antennas is its use for transmitting or receiving circularly polarized (CP) waves. A description is given of a simple but accurate method to determine the critical dimensions needed to produce circular polarization for nearly square and nearly circular microstrip antennas. Shen (1981) in connection with the determination of the proper dimensions of an elliptical patch CP microstrip antenna first expressed the modal field in terms of Mathieu functions. To avoid the complicated numerical computation of the Mathieu functions, he approximated these functions in terms of Bessel functions. It is pointed out that the computation of Mathieu functions, or their approximate expressions can be avoided altogether if a perturbation method is applied to find the resonant frequencies of the two orthogonal modes. The implementation of this approach is demonstrated.

On the ''circular vacuum noise'' in electron storage rings

International Nuclear Information System (INIS)

Rosu, H.

1992-02-01

We clarify in some essential points the proposal of Bell and Leinaas to measure the circular Unruh effect in storage rings. In particular the term 'circular Unruh effect' is inappropriate and should be replaced by the better 'circular vacuum noise'. This concept has been used by Takagi in his PTP Supplement of 1986 and corresponds best to the BL discussion. The BL resonance behavior does not fit to the SPEAR first order betatron resonance at 3.605 GeV, but of course, the real experimental situation is much more complicated, corresponding, as a matter of fact, to the rather general term 'synchrotron noise'. The detailed aspects of the synchrotron noise are, as yet, not very well understood. Besides, the much more practical accelerator jargon is to be preferred. We also include a section with comments on radiometry at storage rings. (author). 27 refs

Clinical Outcomes and Safety of Partial Full-Thickness Myotomy versus Circular Muscle Myotomy in Peroral Endoscopic Myotomy for Achalasia Patients

Directory of Open Access Journals (Sweden)

Chenyu Li

2017-01-01

Full Text Available Background. Here we aimed to evaluate and compare the efficacy and safety between partial full-thickness myotomy and circular muscle myotomy during POEM procedure in achalasia patients. Methods. Clinical data of achalasia of cardia (AC patients who underwent POEM in our center during January 2014 to January 2015 was collected (34 cases. 19 patients who received partial full-thickness myotomy were assigned to group A and 14 patients who received circular muscle myotomy were assigned to group B. The procedure-related parameters between the two groups were compared. Symptom relief rate and postprocedure manometry outcomes were compared to evaluate the efficacy. Procedure-related adverse events and complications were compared to evaluate the safety. Results. (1 Mean operation times were significantly shorter in group A than group B (62.42±23.17 vs 87.86±26.44 min, p0.05. (3 Comparison of procedure-related adverse events and complications had no statistical differences (all p>0.05. Conclusion. Partial full-thickness myotomy had no significant differences in efficacy or safety with circular myotomy, but partial full-thickness myotomy significantly reduced the procedure time.

Preparación de secciones estratigráficas: aspectos prácticos del análisis de estratos en obras del Patrimonio Cultural (pigmentos y soportes

Directory of Open Access Journals (Sweden)

Jiménez Roca, E.

2005-12-01

Full Text Available The stratigraphic sections (cross-sections are of valuable utility for scientific studies concerning samples coming from Cultural Heritage materials. This paper aims to show several indications and orientations as a working methodology that allows an easy, economic and versatile procedure of simultaneous preparation concerning these stratigraphic sections. Several steps must be followed: a initial preparation of samples using (polymetacrylate bars; b consolidation using a polymer; c cutting; d polishing; e observation using optical microscopy and photography. The main practical aspects involved in the stratigraphic analysis are described. In particular, pigments and supports are used as illustrative examples. It is pointed out the importante of stratigraphic preparations, which must be representative of the material if a diagnosis or approximation to the conservation-degradation state of the original artwork piece is being pursued. This is very important prior to a second step of restauration and conservation by other specialists. Moreover, the preparation of stratigraphic sections open the possibility of further studies using several techniques applied in materials science analysis, obtaining relevant results concerning texture, chemical and phase composition of these samples of Cultural Heritage.

Las secciones estratigráficas (estratigrafías son de suma utilidad para los estudios científicos de muestras pertenecientes al Patrimonio Cultural. En este artículo se pretende dar una serie de consejos y orientaciones útiles como metodología de trabajo que permite un fácil, económico y versátil procedimiento de preparación de dichas secciones estratigráficas, con posibilidad de realización simultánea. En concreto, las distintas etapas a seguir son: a preparación inicial utilizando tiras de (polimetacrilato; b embutido de las muestras; c corte de las preparaciones; d lijado y pulido; e observación al microscopio óptico y

Introduccion a la hidraulica de aguas subterraneas : un texto programado para auto-ensenanza

Science.gov (United States)

Bennett, Gordon D.

1987-01-01

Este ' texto programado esta diseflado para ayudarle a comprender la teoria de la hidniulica de aguas subterraneas por medio de la auto-enseflanza. La instrucci6n programada es un enfoque a una materia, un metodo de aprender;que no elimina el esfuerzo mental del proceso de aprendizaje. Algunas secciones de este programa necesitan solamente ser leidas; otras tendrian que ser elaboradas con lapiz y papel. Algunas preguntas pueden ser contestadas directamente; otras requieren calculos. A medida que se avanza en el texto, tendra que consultar frecuentemente textos o referencias sobre matematicas, mecanica de fluidos e hidrologia. En cada una de las ocho partes del texto, inicie el programa de instrucci6n leyendo la Secci6n 1. Elija una respuesta a la pregunta al final de la secci6n y dirijase a la nueva secci6n indicada al lado de la respuesta escogida. Si su respuesta fue correcta, pase a la secci6n que contiene materia nueva y otra pregunta, y proceda tal como en la Secci6n 1. Si su respuesta no fue correcta, dirijase a la secci6n que contiene explicaciones adicionales sobre el tema anterior y que le indica volver a la pregunta inicial e intentar de nuevo. En este caso, valdra Ia pena repasar el material de la secci6n anterior. Continue de esta man era en el programa hasta que llegue a Ia secci6n que indica el final de la parte. Observe que aunque las secciones estan en orden numerico en cada una de las ocho partes, por lo general, usted no procedeni en secuencia numerica (Secci6n 1 ala Secci6n 2, etc.) de principia a fin.

Simulation of car movement along circular path

Science.gov (United States)

Fedotov, A. I.; Tikhov-Tinnikov, D. A.; Ovchinnikova, N. I.; Lysenko, A. V.

2017-10-01

Under operating conditions, suspension system performance changes which negatively affects vehicle stability and handling. The paper aims to simulate the impact of changes in suspension system performance on vehicle stability and handling. Methods. The paper describes monitoring of suspension system performance, testing of vehicle stability and handling, analyzes methods of suspension system performance monitoring under operating conditions. The mathematical model of a car movement along a circular path was developed. Mathematical tools describing a circular movement of a vehicle along a horizontal road were developed. Turning car movements were simulated. Calculation and experiment results were compared. Simulation proves the applicability of a mathematical model for assessment of the impact of suspension system performance on vehicle stability and handling.

An expert system for process planning of sheet metal parts produced ...

Indian Academy of Sciences (India)

Sachin Salunkhe

set of production rules and frames for process planning of axisymmetric deep ... parameters for design of stamping die for manufacturing of circular cup with ..... proper sequence of operations to manufacture sheet metal part correctly and ...

A fast computation method for MUSIC spectrum function based on circular arrays

Science.gov (United States)

Du, Zhengdong; Wei, Ping

2015-02-01

The large computation amount of multiple signal classification (MUSIC) spectrum function seriously affects the timeliness of direction finding system using MUSIC algorithm, especially in the two-dimensional directions of arrival (DOA) estimation of azimuth and elevation with a large antenna array. This paper proposes a fast computation method for MUSIC spectrum. It is suitable for any circular array. First, the circular array is transformed into a virtual uniform circular array, in the process of calculating MUSIC spectrum, for the cyclic characteristics of steering vector, the inner product in the calculation of spatial spectrum is realised by cyclic convolution. The computational amount of MUSIC spectrum is obviously less than that of the conventional method. It is a very practical way for MUSIC spectrum computation in circular arrays.

41 CFR 102-33.315 - What are the procedures for mutilating unsalvageable aircraft parts?

Science.gov (United States)

2010-07-01

... Advisory Circular 21-38, “Disposition of Unsalvageable Aircraft Parts and Materials,” available from the... Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT..., remove the serial/lot/part numbers, and cut, crush, grind, melt, burn, or use other means to prevent the...

Administrative Circular n° 12

CERN Document Server

2005-01-01

Following a recommendation by the Standing Concertation Committee, the Director-General has approved the amounts used for the reimbursements mentioned in Administrative Circular N° 12 as follows : The figures, effective from 1 September 2005, are : § 8a : 16.50 Swiss francs § 9a : 662 Swiss francs § 9b : 33 Swiss francs

Bragg transmission phase plates for the production of circularly polarized x-rays

International Nuclear Information System (INIS)

Lang, J.C.; Srajer, G.

1994-01-01

A thin-crystal Si (400) Bragg transmission x-ray phase plate has been constructed for the production of 5 to 12 keV circularly polarized x-rays. Using multiple beam diffraction from a GaAs crystal, a direct measurement of the degree of circular polarization as a function of off-Bragg position was made. These measurements indicated nearly complete circular polarization (|P c | ≥ 0.95) and full helicity reversal on opposite sides of the rocking curve

Políticas de apropiación de las TIC en los procesos de enseñanza y de aprendizaje de la Universidad Pontificia Bolivariana seccional Palmira

Directory of Open Access Journals (Sweden)

Ortega Z., Edwin J.

2015-07-01

Full Text Available El acelerado desarrollo de las TIC propone gran reto para todas las instituciones de educación, involucrando en ello a las instituciones de educación superior y consecuentemente a la UPB (Universidad Pontificia Bolivariana seccional Palmira que acorde a las políticas nacionales propone la extensión de las políticas de apropiación de las TIC en los procesos de enseñanza y de aprendizaje. El ejercicio se soporte definiciones de didáctica y currículo a nivel histórico e institucional, por otro lado el concepto posmoderno de sociedad de la información que entrega gran importancia al conocimiento y propone una nueva dinámica económica, término que se apoya en la teoría generalde sistemas y como complemento los niveles de competencias en TIC para docentes definidos por la UNESCO. Lo anterior permite revisar el ejercicio de transformación curricular que actualmente se adelanta en la institución, y de manera facilita la correcta integración de las TIC en el currículo.

The optimum circular field size for dental radiography with intraoral films

NARCIS (Netherlands)

Straaten, F.J. van; Aken, J. van

Intraoral radiographs are often made with circular fields to irradiate the film, and in many instances these fields are much larger than the film. The feasibility of reducing a circular radiation field without increasing the probability of excessive cone cutting was evaluated clinically, and an

Administrative Circular N° 12

CERN Multimedia

2003-01-01

Following a recommendation by the Standing Concertation Committee, the Director-General has approved the amounts used for the reimbursements mentioned in Administrative Circular N° 12 as follows : The figures, effective from 1 September 2003, are : § 8a : 16.50 Swiss francs (previously 16.- Swiss francs) § 9a : 663 Swiss francs (previously 640.- Swiss francs) § 9b : 33 Swiss francs (previously 32.- Swiss francs) Human Resources Division Tel. 72862/74474

Elliptical cross section fuel rod study II; Estudio de barras combustibles de seccion eliptica II

Energy Technology Data Exchange (ETDEWEB)

Taboada, H; Marajofsky, A [Comision Nacional de Energia Atomica, San Martin (Argentina). Unidad de Actividad Combustibles Nucleares

1997-12-31

In this paper it is continued the behavior analysis and comparison between cylindrical fuel rods of circular and elliptical cross sections. Taking into account the accepted models in the literature, the fission gas swelling and release were studied. An analytical comparison between both kinds of rod reveals a sensible gas release reduction in the elliptical case, a 50% swelling reduction due to intragranular bubble coalescence mechanism and an important swelling increase due to migration bubble mechanism. From the safety operation point of view, for the same linear power, an elliptical cross section rod is favored by lower central temperatures, lower gas release rates, greater gas store in ceramic matrix and lower stored energy rates. (author). 6 refs., 8 figs., 1 tab.

Symmetric Circular Matchings and RNA Folding

DEFF Research Database (Denmark)

Hofacker, Ivo L.; Reidys, Christian; Stadler, Peter F.

2012-01-01

RNA secondary structures can be computed as optimal solutions of certain circular matching problems. An accurate treatment of this energy minimization problem has to account for the small --- but non-negligible --- entropic destabilization of secondary structures with non-trivial automorphisms. S...

Circular Economy: Questions for Responsible Minerals, Additive Manufacturing and Recycling of Metals

Directory of Open Access Journals (Sweden)

Damien Giurco

2014-05-01

Full Text Available The concept of the circular economy proposes new patterns of production, consumption and use, based on circular flows of resources. Under a scenario where there is a global shift towards the circular economy, this paper discusses the advent of two parallel and yet-to-be-connected trends for Australia, namely: (i responsible minerals supply chains and (ii additive manufacturing, also known as 3D production systems. Acknowledging the current context for waste management, the paper explores future interlinked questions which arise in the circular economy for responsible supply chains, additive manufacturing, and metals recycling. For example, where do mined and recycled resources fit in responsible supply chains as inputs to responsible production? What is required to ensure 3D production systems are resource efficient? How could more distributed models of production, enabled by additive manufacturing, change the geographical scale at which it is economic or desirable to close the loop? Examples are given to highlight the need for an integrated research agenda to address these questions and to foster Australian opportunities in the circular economy.

Ultra-wideband circular-polarization converter with micro-split Jerusalem-cross metasurfaces

Science.gov (United States)

Gao, Xi; Yu, Xing-Yang; Cao, Wei-Ping; Jiang, Yan-Nan; Yu, Xin-Hua

2016-12-01

An ultrathin micro-split Jerusalem-cross metasurface is proposed in this paper, which can efficiently convert the linear polarization of electromagnetic (EM) wave into the circular polarization in ultra-wideband. By symmetrically employing two micro-splits on the horizontal arm (in the x direction) of the Jerusalem-cross structure, the bandwidth of the proposed device is significantly extended. Both simulated and experimental results show that the proposed metasurface is able to convert linearly polarized waves into circularly polarized waves in a frequency range from 12.4 GHz to 21 GHz, with an axis ratio better than 1 dB. The simulated results also show that such a broadband and high-performance are maintained over a wide range of incident angle. The presented polarization converter can be used in a number of areas, such as spectroscopy and wireless communications. Project supported by the National Natural Science Foundation of China (Grant Nos. 61461016 and 61661012), the Natural Science Foundation of Guangxi Zhuang Autonomous Region, China (Grant Nos. 2014GXNSFAA118366, 2014GXNSFAA118283, and 2015jjBB7002), and the Innovation Project of Graduate Education of Guilin University of Electronic Technology, China (Grant No. 2016YJCX82).

Subsurface architecture of Las Bombas volcano circular structure (Southern Mendoza, Argentina) from geophysical studies

Science.gov (United States)

Prezzi, Claudia; Risso, Corina; Orgeira, María Julia; Nullo, Francisco; Sigismondi, Mario E.; Margonari, Liliana

2017-08-01

The Plio-Pleistocene Llancanelo volcanic field is located in the south-eastern region of the province of Mendoza, Argentina. This wide back-arc lava plateau, with hundreds of monogenetic pyroclastic cones, covers a large area behind the active Andean volcanic arc. Here we focus on the northern Llancanelo volcanic field, particularly in Las Bombas volcano. Las Bombas volcano is an eroded, but still recognizable, scoria cone located in a circular depression surrounded by a basaltic lava flow, suggesting that Las Bombas volcano was there when the lava flow field formed and, therefore, the lava flow engulfed it completely. While this explanation seems reasonable, the common presence of similar landforms in this part of the field justifies the need to establish correctly the stratigraphic relationship between lava flow fields and these circular depressions. The main purpose of this research is to investigate Las Bombas volcano 3D subsurface architecture by means of geophysical methods. We carried out a paleomagnetic study and detailed topographic, magnetic and gravimetric land surveys. Magnetic anomalies of normal and reverse polarity and paleomagnetic results point to the occurrence of two different volcanic episodes. A circular low Bouguer anomaly was detected beneath Las Bombas scoria cone indicating the existence of a mass deficit. A 3D forward gravity model was constructed, which suggests that the mass deficit would be related to the presence of fracture zones below Las Bombas volcano cone, due to sudden degassing of younger magma beneath it, or to a single phreatomagmatic explosion. Our results provide new and detailed information about Las Bombas volcano subsurface architecture.

A Review of the Circular Economy and its Implementation

OpenAIRE

Heshmati, Almas

2015-01-01

Circular economy (CE) is a sustainable development strategy that is being proposed to tackle urgent problems of environmental degradation and resource scarcity. CE's 3R principles are to reduce, reuse and recycle materials. The principles account for a circular system where all materials are recycled, all energy is derived from renewables; activities support and rebuild the ecosystem and support human health and a healthy society and resources are used to generate value. This study is a revie...

Effect of plasma actuator and splitter plate on drag coefficient of a circular cylinder

Science.gov (United States)

Akbıyık, Hürrem; Erkan Akansu, Yahya; Yavuz, Hakan; Ertuğrul Bay, Ahmet

2016-03-01

In this paper, an experimental study on flow control around a circular cylinder with splitter plate and plasma actuator is investigated. The study is performed in wind tunnel for Reynolds numbers at 4000 and 8000. The wake region of circular cylinder with a splitter plate is analyzed at different angles between 0 and 180 degrees. In this the study, not only plasma actuators are activated but also splitter plate is placed behind the cylinder. A couple electrodes are mounted on circular cylinder at ±90 degrees. Also, flow visualization is achieved by using smoke wire method. Drag coefficient of the circular cylinder with splitter plate and the plasma actuator are obtained for different angles and compared with the plain circular cylinder. While attack angle is 0 degree, drag coefficient is decreased about 20% by using the splitter plate behind the circular cylinder. However, when the plasma actuators are activated, the improvement of the drag reduction is measured to be 50%.

Circular dichroism in a three-dimensional semiconductor chiral photonic crystal

Energy Technology Data Exchange (ETDEWEB)

Takahashi, S.; Ota, Y.; Tatebayashi, J. [Institute of Nano Quantum Information Electronics, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505 (Japan); Tajiri, T. [Institute of Industrial Science, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505 (Japan); Iwamoto, S.; Arakawa, Y. [Institute of Nano Quantum Information Electronics, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505 (Japan); Institute of Industrial Science, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505 (Japan)

2014-08-04

Circular dichroism covering the telecommunication band is experimentally demonstrated in a semiconductor-based three-dimensional chiral photonic crystal (PhC). We design a rotationally stacked woodpile PhC structure where neighboring layers are rotated by 60° and three layers construct a single helical unit. The mirror-asymmetric PhC made from GaAs with sub-micron periodicity is fabricated by a micro-manipulation technique. Due to the large contrast of refractive indices between GaAs and air, the experimentally obtained circular dichroism extends over a wide wavelength range, with the transmittance of right-handed circularly polarized incident light being 85% and that of left-handed light being 15% at a wavelength of 1.3 μm. The obtained results show good agreement with numerical simulations.

Circular dichroism measurements at an x-ray free-electron laser with polarization control

Energy Technology Data Exchange (ETDEWEB)

Hartmann, G.; Shevchuk, I.; Walter, P.; Viefhaus, J. [Deutsches Elektronen-Synchrotron, Notkestraße 85, 22607 Hamburg (Germany); Lindahl, A. O. [PULSE at Stanford, 2575 Sand Hill Road, Menlo Park, California 94025 (United States); Knie, A. [Institut für Physik, University of Kassel, Heinrich-Plett-Str. 40, 34132 Kassel (Germany); Hartmann, N.; Lutman, A. A.; MacArthur, J. P.; Glownia, J. M.; Helml, W.; Huang, Z.; Marinelli, A.; Nuhn, H.-D.; Moeller, S.; Coffee, R. N.; Ilchen, M., E-mail: markus.ilchen@xfel.eu [SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, California 94025 (United States); Buck, J.; Galler, A.; Liu, J. [European XFEL GmbH, Albert-Einstein-Ring 19, 22761 Hamburg (Germany); and others

2016-08-15

A non-destructive diagnostic method for the characterization of circularly polarized, ultraintense, short wavelength free-electron laser (FEL) light is presented. The recently installed Delta undulator at the LCLS (Linac Coherent Light Source) at SLAC National Accelerator Laboratory (USA) was used as showcase for this diagnostic scheme. By applying a combined two-color, multi-photon experiment with polarization control, the degree of circular polarization of the Delta undulator has been determined. Towards this goal, an oriented electronic state in the continuum was created by non-resonant ionization of the O{sub 2} 1s core shell with circularly polarized FEL pulses at hν ≃ 700 eV. An also circularly polarized, highly intense UV laser pulse with hν ≃ 3.1 eV was temporally and spatially overlapped, causing the photoelectrons to redistribute into so-called sidebands that are energetically separated by the photon energy of the UV laser. By determining the circular dichroism of these redistributed electrons using angle resolving electron spectroscopy and modeling the results with the strong-field approximation, this scheme allows to unambiguously determine the absolute degree of circular polarization of any pulsed, ultraintense XUV or X-ray laser source.

Circular dichroism measurements at an x-ray free-electron laser with polarization control

Science.gov (United States)

Hartmann, G.; Lindahl, A. O.; Knie, A.; Hartmann, N.; Lutman, A. A.; MacArthur, J. P.; Shevchuk, I.; Buck, J.; Galler, A.; Glownia, J. M.; Helml, W.; Huang, Z.; Kabachnik, N. M.; Kazansky, A. K.; Liu, J.; Marinelli, A.; Mazza, T.; Nuhn, H.-D.; Walter, P.; Viefhaus, J.; Meyer, M.; Moeller, S.; Coffee, R. N.; Ilchen, M.

2016-08-01

A non-destructive diagnostic method for the characterization of circularly polarized, ultraintense, short wavelength free-electron laser (FEL) light is presented. The recently installed Delta undulator at the LCLS (Linac Coherent Light Source) at SLAC National Accelerator Laboratory (USA) was used as showcase for this diagnostic scheme. By applying a combined two-color, multi-photon experiment with polarization control, the degree of circular polarization of the Delta undulator has been determined. Towards this goal, an oriented electronic state in the continuum was created by non-resonant ionization of the O2 1s core shell with circularly polarized FEL pulses at hν ≃ 700 eV. An also circularly polarized, highly intense UV laser pulse with hν ≃ 3.1 eV was temporally and spatially overlapped, causing the photoelectrons to redistribute into so-called sidebands that are energetically separated by the photon energy of the UV laser. By determining the circular dichroism of these redistributed electrons using angle resolving electron spectroscopy and modeling the results with the strong-field approximation, this scheme allows to unambiguously determine the absolute degree of circular polarization of any pulsed, ultraintense XUV or X-ray laser source.

A bifunctional amorphous polymer exhibiting equal linear and circular photoinduced birefringences.

Science.gov (United States)

Royes, Jorge; Provenzano, Clementina; Pagliusi, Pasquale; Tejedor, Rosa M; Piñol, Milagros; Oriol, Luis

2014-11-01

The large and reversible photoinduced linear and circular birefringences in azo-compounds are at the basis of the interest in these materials, which are potentially useful for several applications. Since the onset of the linear and circular anisotropies relies on orientational processes, which typically occur on the molecular and supramolecular length scale, respectively, a circular birefringence at least one order of magnitude lower than the linear one is usually observed. Here, the synthesis and characterization of an amorphous polymer with a dimeric repeating unit containing a cyanoazobenzene and a cyanobiphenyl moiety are reported, in which identical optical linear and circular birefringences are induced for proper light dose and ellipticity. A pump-probe technique and an analytical method based on the Stokes-Mueller formalism are used to investigate the photoinduced effects and to evaluate the anisotropies. The peculiar photoresponse of the polymer makes it a good candidate for applications in smart functional devices. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Enrichment of Circular Code Motifs in the Genes of the Yeast Saccharomyces cerevisiae

Directory of Open Access Journals (Sweden)

Christian J. Michel

2017-12-01

Full Text Available A set X of 20 trinucleotides has been found to have the highest average occurrence in the reading frame, compared to the two shifted frames, of genes of bacteria, archaea, eukaryotes, plasmids and viruses. This set X has an interesting mathematical property, since X is a maximal C 3 self-complementary trinucleotide circular code. Furthermore, any motif obtained from this circular code X has the capacity to retrieve, maintain and synchronize the original (reading frame. Since 1996, the theory of circular codes in genes has mainly been developed by analysing the properties of the 20 trinucleotides of X , using combinatorics and statistical approaches. For the first time, we test this theory by analysing the X motifs, i.e., motifs from the circular code X , in the complete genome of the yeast Saccharomyces cerevisiae. Several properties of X motifs are identified by basic statistics (at the frequency level, and evaluated by comparison to R motifs, i.e., random motifs generated from 30 different random codes R . We first show that the frequency of X motifs is significantly greater than that of R motifs in the genome of S. cerevisiae. We then verify that no significant difference is observed between the frequencies of X and R motifs in the non-coding regions of S. cerevisiae, but that the occurrence number of X motifs is significantly higher than R motifs in the genes (protein-coding regions. This property is true for all cardinalities of X motifs (from 4 to 20 and for all 16 chromosomes. We further investigate the distribution of X motifs in the three frames of S. cerevisiae genes and show that they occur more frequently in the reading frame, regardless of their cardinality or their length. Finally, the ratio of X genes, i.e., genes with at least one X motif, to non- X genes, in the set of verified genes is significantly different to that observed in the set of putative or dubious genes with no experimental evidence. These results, taken together

Enrichment of Circular Code Motifs in the Genes of the Yeast Saccharomyces cerevisiae.

Science.gov (United States)

Michel, Christian J; Ngoune, Viviane Nguefack; Poch, Olivier; Ripp, Raymond; Thompson, Julie D

2017-12-03

A set X of 20 trinucleotides has been found to have the highest average occurrence in the reading frame, compared to the two shifted frames, of genes of bacteria, archaea, eukaryotes, plasmids and viruses. This set X has an interesting mathematical property, since X is a maximal C3 self-complementary trinucleotide circular code. Furthermore, any motif obtained from this circular code X has the capacity to retrieve, maintain and synchronize the original (reading) frame. Since 1996, the theory of circular codes in genes has mainly been developed by analysing the properties of the 20 trinucleotides of X, using combinatorics and statistical approaches. For the first time, we test this theory by analysing the X motifs, i.e., motifs from the circular code X, in the complete genome of the yeast Saccharomyces cerevisiae . Several properties of X motifs are identified by basic statistics (at the frequency level), and evaluated by comparison to R motifs, i.e., random motifs generated from 30 different random codes R. We first show that the frequency of X motifs is significantly greater than that of R motifs in the genome of S. cerevisiae . We then verify that no significant difference is observed between the frequencies of X and R motifs in the non-coding regions of S. cerevisiae , but that the occurrence number of X motifs is significantly higher than R motifs in the genes (protein-coding regions). This property is true for all cardinalities of X motifs (from 4 to 20) and for all 16 chromosomes. We further investigate the distribution of X motifs in the three frames of S. cerevisiae genes and show that they occur more frequently in the reading frame, regardless of their cardinality or their length. Finally, the ratio of X genes, i.e., genes with at least one X motif, to non-X genes, in the set of verified genes is significantly different to that observed in the set of putative or dubious genes with no experimental evidence. These results, taken together, represent the first

Mecánica de vigas curvas anisótropas con sección de paredes delgadas

OpenAIRE

Piovan, Marcelo; Cortínez, Víctor

2003-01-01

En este trabajo se presenta un modelo teórico para el análisis estructural estático de vigas curvas anisótropas con secciones de pared delgada. El modelo incorpora de manera completa la flexibilidad de corte, la cual se discrimina en corte debido a flexión y corte debido a alabeo no uniforme. Asimismo, el modelo se concibe para secciones arbitrarias tanto abiertas como cerradas. Se introduce un nuevo elemento finito de viga curva de clase C0, el cual se desarrolla a partir de la i...

Circular myotomy as an aid to resection and end-to-end anastomosis of the esophagus.

Science.gov (United States)

Attum, A A; Hankins, J R; Ngangana, J; McLaughlin, J S

1979-08-01

Segments ranging from 40 to 70% of the thoracic esophagus were resected in 80 mongrel dogs. End-to-end anastomosis was effected after circular myotomy either proximal or distal, or both proximal and distal, to the anastomosis. Among dogs undergoing resection of 60% of the esophagus, distal myotomy enabled 6 of 8 animals to survive, and combined proximal and distal myotomy permitted 8 of 10 to survive. Cineesophagography was performed in a majority of the 50 surviving animals and showed no appreciable delay of peristalsis at the myotomy sites. When these sites were examined at postmortem examination up to 13 months after operation, 1 dog showed a small diverticulum but none showed dilatation or stricture. It is concluded that circular myotomy holds real promise as a means of extending the clinical application of esophageal resection with end-to-end anastomosis.

Lattice Boltzmann simulation of flow around a confined circular cyclinder

International Nuclear Information System (INIS)

Ashrafizaadeh, M.; Zadehgol, A.

2002-01-01

A two dimensional lattice Boltzmann model (LBM) based on a single time relaxation BGK model has been developed. Several benchmark problems including the Poiseuille flow, the lid driven cavity flow and the flow around a circular cylinder have been performed employing a d2q9 lattice. The laminar flow around a circular cylinder within a channel has been extensively investigated using the present lattice Boltzmann model. Both symmetric and asymmetric placement configurations of the circular cylinder within the channel have been considered. A new treatment for the outlet velocity and pressure (density) boundary conditions has been proposed and validated. The present LBM results are in excellent agreement with those of the other existing CFD results. Careful examination of the LBM results and an appropriate calculation of the lift coefficient based on the rectangular lattice representation of the circular cylinder reveals that the periodic oscillation of the lift coefficient has a second harmonic when the cylinder is placed asymmetrically within the channel. The second harmonic could be associated with an asymmetrical shedding pattern of the vortices behind the cylinder from the upper and lower sides of the cylinder. (author)

Use of a circular stapler for Billroth I anastomosis after distal ...

African Journals Online (AJOL)

2013-11-04

Nov 4, 2013 ... linear staplers. Takeuchi et al.[3] then reported the first gastroduodenal anastomosis using one circular and one linear stapler. This technique has also been effectively used for Billroth II anastomosis.[4] We established gastroduodenal anastomosis using the circular stapler before resection of the stomach ...

Circular Stapler-Assisted Extraperitoneal Colostomy in Laparoscopic Abdominoperineal Resection: a Single Surgeon Experience.

Science.gov (United States)

Zhang, Peng; Bai, Jie; Shuai, Xiaoming; Chang, Weilong; Gao, Jinbo; Liu, Xinghua; Wang, Guobin; Tao, Kaixiong

2016-03-01

Nowadays, laparoscopic abdominoperineal resection (LAPR) not only has the same oncologic safety of open surgery and but also has the common advantages of laparoscopic surgery. However, given the difficulty in operation and long operative time, laparoscopic extraperitoneal colostomy construction is rarely practiced and reported. In this study, we describe technique of extraperitoneal colostomy using circular stapler following LAPR and demonstrate its efficacy and safety. This is a retrospective analysis of prospectively maintained data of 42 patients who underwent LAPR with circular stapler-assisted extraperitoneal colostomy in our department between July 2011 and June 2014. The mean time for extraperitoneal colostomy construction was 25 min (18-33 min). The mean operative time, estimated blood loss, postoperative gastrointestinal function recovery time, and duration of postoperative hospital stay were 160 min (115-225 min), 45 ml (10-250 ml), 33 h (26-45 h), and 8.6 days (6-13 days), respectively; 4.8 % of the patients had postoperative short-term complications. There were no stenosis, prolapse, and parastomal hernia observed in follow-up period. At 6 months after operation, 26 patients (62 %) claimed to be satisfied with their postoperative stool habits, 29 patients (69 %) had sensation to defecate per stoma, and 11 (26.2 %) patients had the ability to defer defecation for solid or liquid stool per stoma. Circular stapler-assisted extraperitoneal colostomy is an easy, effective, and safe technique following LAPR and appears to minimize the occurrence of stomal complications and improve the quality of life for patients.

PROPERTIES OF BULGELESS DISK GALAXIES. II. STAR FORMATION AS A FUNCTION OF CIRCULAR VELOCITY

Energy Technology Data Exchange (ETDEWEB)

Watson, Linda C. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Martini, Paul; Wong, Man-Hong [Department of Astronomy, Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Lisenfeld, Ute [Departamento de Fisica Teorica y del Cosmos, Universidad de Granada, 18071 Granada (Spain); Boeker, Torsten [European Space Agency, Keplerlaan 1, 2200 AG Noordwijk (Netherlands); Schinnerer, Eva, E-mail: lwatson@cfa.harvard.edu [Max-Planck-Institut fuer Astronomie, Koenigstuhl 17, D-69117 Heidelberg (Germany)

2012-06-01

We study the relation between the surface density of gas and star formation rate in 20 moderately inclined, bulgeless disk galaxies (Sd-Sdm Hubble types) using CO(1-0) data from the IRAM 30 m telescope, H I emission line data from the VLA/EVLA, H{alpha} data from the MDM Observatory, and polycyclic aromatic hydrocarbon emission data derived from Spitzer IRAC observations. We specifically investigate the efficiency of star formation as a function of circular velocity (v{sub circ}). Previous work found that the vertical dust structure and disk stability of edge-on, bulgeless disk galaxies transition from diffuse dust lanes with large scale heights and gravitationally stable disks at v{sub circ} < 120 km s{sup -1} (M{sub *} {approx}< 10{sup 10} M{sub Sun }) to narrow dust lanes with small scale heights and gravitationally unstable disks at v{sub circ} > 120 km s{sup -1}. We find no transition in star formation efficiency ({Sigma}{sub SFR}/{Sigma}{sub Hi+H{sub 2}}) at v{sub circ} = 120 km s{sup -1} or at any other circular velocity probed by our sample (v{sub circ} = 46-190 km s{sup -1}). Contrary to previous work, we find no transition in disk stability at any circular velocity in our sample. Assuming our sample has the same dust structure transition as the edge-on sample, our results demonstrate that scale height differences in the cold interstellar medium of bulgeless disk galaxies do not significantly affect the molecular fraction or star formation efficiency. This may indicate that star formation is primarily affected by physical processes that act on smaller scales than the dust scale height, which lends support to local star formation models.

A new X-ray detector for magnetic circular dichroism experiments

CERN Document Server

Bateman, J E; Dudzik, E; Laan, G V D; Lipp, J D; Smith, A D; Stephenson, R

2001-01-01

X-ray magnetic circular dichroism (XMCD) studies of magnetic 3d transition metal samples require the recording of high quality absorption scans in high magnetic fields using circularly polarised soft X-rays of energies in the range 0.5-1 keV. A Gas Microstrip Detector is described which permits the option of using the X-ray fluorescence signal instead of the usual electron yield signal.

Modeling and analysis of circular flexural-vibration-mode piezoelectric transformer.

Science.gov (United States)

Huang, Yihua; Huang, Wei

2010-12-01

We propose a circular flexural-vibration-mode piezoelectric transformer and perform a theoretical analysis of the transformer. An equivalent circuit is derived from the equations of piezoelectricity and the Hamilton's principle. With this equivalent circuit, the voltage gain ratio, input impedance, and the efficiency of the circular flexural-vibration-mode piezoelectric transformer can be determined. The basic behavior of the transformer is shown by numerical results.

Chiroptical methods in a wide wavelength range for obtaining Ln3+ complexes with circularly polarized luminescence of practical interest.

Science.gov (United States)

Górecki, Marcin; Carpita, Luca; Arrico, Lorenzo; Zinna, Francesco; Di Bari, Lorenzo

2018-05-29

We studied enantiopure chiral trivalent lanthanide (Ln3+ = La3+, Sm3+, Eu3+, Gd3+, Tm3+, and Yb3+) complexes with two fluorinated achiral tris(β-diketonate) ligands (HFA = hexafluoroacetylacetonate and TTA = 2-thenoyltrifluoroacetonate), incorporating a chiral bis(oxazolinyl)pyridine (PyBox) unit as a neutral ancillary ligand, by the combined use of optical and chiroptical methods, ranging from UV to IR both in absorption and circular dichroism (CD), and including circularly polarized luminescence (CPL). Ultimately, all the spectroscopic information is integrated into a total and a chiroptical super-spectrum, which allows one to characterize a multidimensional chemical space, spanned by the different Ln3+ ions, the acidity and steric demand of the diketone and the chirality of the PyBox ligand. In all cases, the Ln3+ ions endow the systems with peculiar chiroptical properties, either allied to f-f transitions or induced by the metal onto the ligand. In more detail, we found that Sm3+ complexes display interesting CPL features, which partly superimpose and partly integrate the more common Eu3+ properties. Especially, in the context of security tags, the pair Sm/Eu may be a winning choice for chiroptical barcoding.

Circular polarization analyzer with polarization tunable focusing of surface plasmon polaritons

Energy Technology Data Exchange (ETDEWEB)

Wang, Sen; Zhang, Yan, E-mail: yzhang@mail.cnu.edu.cn [Department of Physics, Harbin Institute of Technology, Harbin 150001 (China); Beijing Key Laboratory for Metamaterials and Devices, and Key Laboratory of Terahertz Optoelectronics, Ministry of Education, Department of Physics, Capital Normal University, Beijing 100048 (China); Wang, Xinke [Beijing Key Laboratory for Metamaterials and Devices, and Key Laboratory of Terahertz Optoelectronics, Ministry of Education, Department of Physics, Capital Normal University, Beijing 100048 (China); Kan, Qiang [State Key Laboratory for Integrated Optoelectronics, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083 (China); Qu, Shiliang [Optoelectronics Department, Harbin Institute of Technology at Weihai, Weihai 264209 (China)

2015-12-14

A practical circular polarization analyzer (CPA) that can selectively focus surface plasmon polaritons (SPPs) at two separate locations, according to the helicity of the circularly polarized light, is designed and experimentally verified in the terahertz frequency range. The CPA consists of fishbone-slit units and is designed using the simulated annealing algorithm. By differentially detecting the intensities of the two SPPs focuses, the helicity of the incident circularly polarized light can be obtained and the CPA is less vulnerable to the noise of incident light. The proposed device may also have wide potential applications in chiral SPPs photonics and the analysis of chiral molecules in biology.

Control of charged droplets using electrohydrodynamic repulsion for circular droplet patterning

International Nuclear Information System (INIS)

Kim, Bumjoo; Sung, Jungwoo; Lim, Geunbae; Nam, Hyoryung; Kim, Sung Jae; Joo, Sang W

2011-01-01

We report a novel method to form a circular pattern of monodisperse microdroplets using an electrohydrodynamic repulsion (EDR) mechanism. EDR is a phenomenon of electrostatical bounced microdroplets from an accumulated droplet on a bottom substrate. In addition to a regular EDR system, by placing a ring electrode between the capillary and ground substrate, two separate regions were created. A parameter study of two regions was carried out for droplet formation and falling velocity to control the radius of the generated droplets and the circular patterns independently. Based on energy conservation theory, our experimental results showed that the free-falling region exerted crucial influences on the sizes of the circular patterns

Institutional incentives in circular economy transition

NARCIS (Netherlands)

Fischer, Aglaia; Pascucci, Stefano

2017-01-01

The aim of this paper is to gain insight into how requirements for transitioning to circular economy creates new organizational forms in inter-firm collaborations, and ultimately how they stimulate the emergence of new institutions enhancing sustainability. Two strands of literature, one on

There exists circularity between WACC and value? Another solution

Directory of Open Access Journals (Sweden)

Ignacio Vélez-Pareja

2006-01-01

Full Text Available Although we know there exists a simple approach to solve the circularity between value and the discount rate, known as the Adjusted Present Value proposed by Myers, 1974, it seems that practitioners still rely on the traditional Weighted Average Cost of Capital, WACC approach of weig-hting the cost of debt, Kd and the costof equity, Ke and discounting the Free Cash Flow, FCF. We show how to solve circularity when calculating value with the free cash flow, FCF and the WACC. As a result of the solution wearrive at a known solution when we assume the discount rate of the tax savings as Ke, the cost of unlevered equity: the capital cash flow, CCF discounted at Ku. When assuming Kdas the discount rate for the tax savings, we find an expression for calculating value that does not implies circularity. We do this for a single period and for N periods.

Dual-Resonant Implantable Circular Patch Antenna for Biotelemetry Communication

Directory of Open Access Journals (Sweden)

Rongqiang Li

2016-01-01

Full Text Available A compact broadband implantable circular patch antenna is designed and experimentally demonstrated for Medical Implant Communications Service (MICS band (402–405 MHz. Compared with other similar implantable antennas, the proposed antenna incorporates three advantages for biotelemetry communication. First, it can realize a broad impedance bandwidth by exhibiting dual resonances. Second, it can obtain a compact structure by introducing two arc-shaped slots, a rectangular slot and a circular slot on metal radiating patch. Finally, it can display a friendly shape by using a circular structure. The proposed antenna occupies a volume of about 431.5 mm3 (10.42 × 1.27π mm3, which is a compromise between miniaturization and bandwidth. The measured −10 dB impedance bandwidth is 55 MHz (385–440 MHz. Furthermore, the radiation performance and human body safety consideration of the antenna are examined and characterized.

WIYN Open Cluster Study: Binary Orbits and Tidal Circularization in NGC 6819

Science.gov (United States)

Morscher, Meagan B.; Mathieu, R. D.; Kaeppler, S.; Hole, K. T.; Meibom, S.

2006-12-01

We are conducting a comprehensive stellar radial-velocity survey in NGC 6819, a rich, intermediate age ( 2.4 Gyr) open cluster with [Fe/H] -0.05. As of October 2006, we have obtained 7065 radial-velocity measurements of 1409 stars using the WIYN Hydra Multi-Object Spectrograph, with typical velocity measurement precisions of 0.4 km/s. Using an E/I criterion of 3, we have identified 282 velocity variables. In the past year we have expanded the number of final orbital solutions by 45 to a total of more than 80 solutions. In coeval stellar populations, circular binaries tend to have the shortest orbital periods, while longer period binaries show a distribution of non-zero eccentricities. The circularization of the shortest period orbits is the result of an exchange of stellar and orbital angular momentum due to tidal interactions. We defined a population’s tidal circularization period as the longest orbital period at which a binary of typical initial eccentricity has become circularized (e.g., has evolved to an eccentricity e = 0.01) over the lifetime of the cluster (Meibom & Mathieu, 2005, ApJ, 620, 970). We are studying the trend of increasing tidal circularization periods with population age. Preliminary results in NGC 6819 indicate a tidal circularization period of 7.5 days, which is consistent with this overall trend. We will recalculate the tidal circularization period in order to include the latest sample of orbital solutions. This comprehensive survey also allows us to investigate the relative spatial distributions of spectroscopic binaries and other constant-velocity cluster members of similar mass. We find the spectroscopic binaries to be more centrally concentrated at a statistically significant level, which we attribute to energy equipartition processes. MM was supported by REU NSF grant AST-0453442. RDM, SK, KTH, and SM were supported by NSF grant AST-0406615.

Structural insights into the backbone-circularized granulocyte colony-stimulating factor containing a short connector.

Science.gov (United States)

Miyafusa, Takamitsu; Shibuya, Risa; Honda, Shinya

2018-06-02

Backbone circularization is a powerful approach for enhancing the structural stability of polypeptides. Herein, we present the crystal structure of the circularized variant of the granulocyte colony-stimulating factor (G-CSF) in which the terminal helical region was circularized using a short, two-amino acid connector. The structure revealed that the N- and C-termini were indeed connected by a peptide bond. The local structure of the C-terminal region transited from an α helix to 3 10 helix with a bend close to the N-terminal region, indicating that the structural change offset the insufficient length of the connector. This is the first-ever report of a crystal structure of the backbone of a circularized protein. It will facilitate the development of backbone circularization methodology. Copyright © 2018 Elsevier Inc. All rights reserved.

Behavior of water jet horizontally discharged from a small circular hole set on a circular pipe-surface into air

International Nuclear Information System (INIS)

Tsuyuki, Koji; Igarashi, Saburo; Sudo, Seiichi; Yamabe, Masahiro; Kikuchi, Akira; Oba, Risaburo

2001-01-01

In order to clarify the behavior of the water jet horizontally discharged from a small circular hole set on a circular pipe surface into air, in this paper, for the first step, we systematically observed the jet aspects, the efflux angle, the discharge coefficient and so on, when the hole diameter d is much smaller than the pipe diameter D. Since the upstream kinetic energy from the hole is somewhat higher than the downstream counterpart, the upstream partial jet with higher efflux angle crashes into the downstream partial jet and drives out the latter into up- and down-side, resulting in a marked pair of vortices, so that resulting in a three-dimensional spiral flow accompanying with marked surface waves. (author)

Circularly polarized infrared and visible sum-frequency-generation spectroscopy: Vibrational optical activity measurement

International Nuclear Information System (INIS)

Cheon, Sangheon; Cho, Minhaeng

2005-01-01

Vibrational optical activity spectroscopies utilizing either circularly polarized ir or circularly polarized visible beams were theoretically investigated by considering the infrared and visible sum-frequency-generation (IV-SFG) schemes. In addition to the purely electric dipole-allowed chiral component of the IV-SFG susceptibility, the polarizability-electric quadrupole hyperpolarizability term also contributes to the vibrationally resonant IV-SFG susceptibility. The circular-intensity-difference signal is shown to be determined by the interferences between the all-electric dipole-allowed chiral component and the polarizability-electric-dipole or electric-dipole-electric-quadrupole Raman optical activity tensor components. The circularly polarized SFG methods are shown to be potentially useful coherent spectroscopic tools for determining absolute configurations of chiral molecules in condensed phases

High intensity circular proton accelerators

International Nuclear Information System (INIS)

Craddock, M.K.

1987-12-01

Circular machines suitable for the acceleration of high intensity proton beams include cyclotrons, FFAG accelerators, and strong-focusing synchrotrons. This paper discusses considerations affecting the design of such machines for high intensity, especially space charge effects and the role of beam brightness in multistage accelerators. Current plans for building a new generation of high intensity 'kaon factories' are reviewed. 47 refs

2 CFR Appendix A to Part 230 - General Principles

Science.gov (United States)

2010-01-01

... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false General Principles A Appendix A to Part 230 Grants and Agreements OFFICE OF MANAGEMENT AND BUDGET CIRCULARS AND GUIDANCE Reserved COST PRINCIPLES FOR... Principles General Principles Table of Contents A. Basic Considerations 1. Composition of total costs 2...

The Difficult Conceptualisation of Circular Migration between the EU and the MENA Region

Directory of Open Access Journals (Sweden)

Tamirace FAKHOURY

2010-05-01

Full Text Available This article examines the extent to which circular migration (CM can be framed first as a useful migration typology and second as an efficient migration strategy in the MENA region and between the latter and the EU. After discussing the difficult conceptualisation of the circular migration model, it alludes to the inherent discrepancies between the normative, empirical and prescriptive connotations of the concept, then it analyses different examples of circularity in the MENA region and between the latter and the EU. It concludes that since the very concept of circular migration (as proposed by the EU is still in its exploratory and genesis phases, it is advisable to refrain from conferring an overvalued significance on the CM approach and to consider it rather as a strategy inherent to a more global approach to labour migration in the EU-MENA context. On a more theoretical level, and beyond the specificities of the EU and MENA, this article would suggest caution in the normative use of circular migration. As much contention prevails over circular migration as a migration typology, it would be recommendable that CM be rather considered an option, a policy initiative suitable for some countries more than others, or a strategy to manage migration trends in transnational contexts.

Beyond reductionism: metabolic circularity as a guiding vision for a real biology of systems.

Science.gov (United States)

Cornish-Bowden, Athel; Cárdenas, María Luz; Letelier, Juan-Carlos; Soto-Andrade, Jorge

2007-03-01

The definition of life has excited little interest among molecular biologists during the past half-century, and the enormous development in biology during that time has been largely based on an analytical approach in which all biological entities are studied in terms of their components, the process being extended to greater and greater detail without limit. The benefits of this reductionism are so obvious that they need no discussion, but there have been costs as well, and future advances, for example, for creating artificial life or for taking biotechnology beyond the level of tinkering, will need more serious attention to be given to the question of what makes a living organism living. According to Robert Rosen's theory of metabolism-replacement systems, the central idea missing from molecular biology is that of metabolic circularity, most evident from the obvious but commonly ignored fact that proteins are not given from outside but are products of metabolism, and thus metabolites. Among other consequences, this implies that the usual distinction between proteome and metabolome is conceptually artificial -- however useful it may be in practice -- as the proteome is part of the metabolome.

Home Sewage Disposal. Special Circular 212.

Science.gov (United States)

Wooding, N. Henry

This circular provides current information for homeowners who must repair or replace existing on-lot sewage disposal systems. Site requirements, characteristics and preparation are outlined for a variety of alternatives such as elevated sand mounds, sand-lined beds and trenches, and oversized absorption area. Diagrams indicating construction…

DNA electronic circular dichroism on the inter-base pair scale

DEFF Research Database (Denmark)

Di Meo, Florent; Nørby, Morten Steen; Rubio-Magnieto, Jenifer

2015-01-01

A successful elucidation of the near-ultraviolet electronic circular dichroism spectrum of a short double-stranded DNA is reported. Time-dependent density functional theory methods are shown to accurately predict spectra and assign bands on the microscopic base-pair scale, a finding that opens...... the field for using circular dichroism spectroscopy as a sensitive nanoscale probe of DNA to reveal its complex interactions with the environment. (Chemical Equation Presented)....

Design of circular differential microphone arrays

CERN Document Server

Benesty, Jacob; Cohen, Israel

2015-01-01

Recently, we proposed a completely novel and efficient way to design differential beamforming algorithms for linear microphone arrays. Thanks to this very flexible approach, any order of differential arrays can be designed. Moreover, they can be made robust against white noise amplification, which is the main inconvenience in these types of arrays. The other well-known problem with linear arrays is that electronic steering is not really feasible.  In this book, we extend all these fundamental ideas to circular microphone arrays and show that we can design small and compact differential arrays of any order that can be electronically steered in many different directions and offer a good degree of control of the white noise amplification problem, high directional gain, and frequency-independent response. We also present a number of practical examples, demonstrating that differential beamforming with circular microphone arrays is likely one of the best candidates for applications involving speech enhancement (i....

Transition towards Circular Economy in the Food System

Directory of Open Access Journals (Sweden)

Alexandra Jurgilevich

2016-01-01

Full Text Available Growing population and increased demand for food, inefficient resource use and food distribution, environmental impacts, and high rates of food wasted at all stages of the food system are all calling for transition towards more sustainable practices. In this article we apply the concept of circular economy to the case of a sustainable food system. Furthermore, we explore the transition towards a circular food system through the lens of socio-technical transition theory towards sustainability. We discuss challenges and potential solutions for the production stage (focusing on nutrient flow, the consumption stage (focusing on meat consumption, and food waste and surplus management and prevention.

Stability and amplitude ranges of two dimensional non-linear oscillations with periodical Hamiltonian applied to betatron oscillations in circular particle accelerators: Part 1 and Part 2

Energy Technology Data Exchange (ETDEWEB)

Hagedorn, R

1957-03-07

A mechanical system of two degrees of freedom is considered which can be described by a system of canonical differential equations. The Hamiltonian is assumed to be explicitly time-dependent with period 2. The aim is to bring this system by a sequence of canonical and periodical transformations into a form where the new Hamiltonian is constant and as simple as possible. The general theory is then brought to a stage where it becomes immediately applicable to given particular cases, particularly to circular particle accelerators. More general results are given on exciting strengths of different subresonance lines of equal order, on symmetry relations and on the one-dimensional case. An example is also given where the theory is overstressed and its predictions become wrong.

Analysis of the multipactor effect in circular waveguides excited by two orthogonal polarization waves

Energy Technology Data Exchange (ETDEWEB)

Pérez, A. M.; Boria, V. E. [Departamento de Comunicaciones-iTEAM, Universidad Politécnica de Valencia Camino de Vera s/n, 46022 Valencia (Spain); Gimeno, B. [Departamento de Física Aplicada y Electromagnetismo-ICMUV, Universitat de València c/Dr. Moliner, 50, 46100 Valencia (Spain); Anza, S.; Vicente, C.; Gil, J. [Aurora Software and Testing S.L., Edificio de Desarrollo Empresarial 9B, Universidad Politécnica de Valencia, Camino de Vera s/n, 46022 Valencia (Spain)

2014-08-15

Circular waveguides, either employed as resonant cavities or as irises connecting adjacent guides, are widely present in many passive components used in different applications (i.e., particle accelerators and satellite subsystems). In this paper, we present the study of the multipactor effect in circular waveguides considering the coexistence of the two polarizations of the fundamental TE{sub 11} circular waveguide mode. For a better understanding of the problem, only low multipactor orders have been explored as a function of the polarization ellipse eccentricity. Special attention has been paid to the linear and circular polarizations, but other more general configurations have also been explored.

Analysis of the multipactor effect in circular waveguides excited by two orthogonal polarization waves

International Nuclear Information System (INIS)

Pérez, A. M.; Boria, V. E.; Gimeno, B.; Anza, S.; Vicente, C.; Gil, J.

2014-01-01

Circular waveguides, either employed as resonant cavities or as irises connecting adjacent guides, are widely present in many passive components used in different applications (i.e., particle accelerators and satellite subsystems). In this paper, we present the study of the multipactor effect in circular waveguides considering the coexistence of the two polarizations of the fundamental TE 11 circular waveguide mode. For a better understanding of the problem, only low multipactor orders have been explored as a function of the polarization ellipse eccentricity. Special attention has been paid to the linear and circular polarizations, but other more general configurations have also been explored

The tail of two models: Impact of circularity and biomass non-homogeneity on UV disinfection of wastewater flocs.

Science.gov (United States)

Azimi, Y; Liu, Y; Tan, T C; Allen, D G; Farnood, R R

2017-12-01

The effects of floc structural characteristics, i.e. shape and dense biomass distribution, were evaluated on ultraviolet (UV) disinfection resistance, represented by the tailing level of the UV dose response curve (DRC). Ellipsoid-shaped flocs of similar volume and different projected circularities were constructed in-silico and a mathematical model was developed to compare their UV DRC tailing levels (indicative of UV-resistance). It was found that floc shape can significantly influence tailing level, and rounder flocs (i.e. flocs with higher circularity) were more UV-resistant. This result was confirmed experimentally by obtaining UV DRCs of two 75-90 μm floc populations with different percentages (20% vs. 30%) of flocs with circularities higher than 0.5. The population enriched in less circular flocs (i.e. 20% flocs with circularities >0.5) had a lower tailing level (at least by 1-log) compared to the other population. The second model was developed to describe variations in UV disinfection kinetics observed in flocs with transverse vs. radial biomass non-homogeneity, indicative of biofilm-originated vs. suspended flocs. The varied-density hemispheres model and shell-core model were developed to simulate transverse and radial non-homogeneity, respectively. The UV DRCs were mathematically constructed and biofilm-originated flocs showed higher UV resistance compared to suspended flocs. The calculated UV DRCs agreed well with the experimental data collected from activated sludge and trickling filter flocs (no fitting parameters were used). These findings provide useful information in terms of designing/modifying upstream processes for reducing UV disinfection energy demand. Copyright © 2017 Elsevier Ltd. All rights reserved.

Attenuation in Superconducting Circular Waveguides

Directory of Open Access Journals (Sweden)

K. H. Yeap

2016-09-01

Full Text Available We present an analysis on wave propagation in superconducting circular waveguides. In order to account for the presence of quasiparticles in the intragap states of a superconductor, we employ the characteristic equation derived from the extended Mattis-Bardeen theory to compute the values of the complex conductivity. To calculate the attenuation in a circular waveguide, the tangential fields at the boundary of the wall are first matched with the electrical properties (which includes the complex conductivity of the wall material. The matching of fields with the electrical properties results in a set of transcendental equations which is able to accurately describe the propagation constant of the fields. Our results show that although the attenuation in the superconducting waveguide above cutoff (but below the gap frequency is finite, it is considerably lower than that in a normal waveguide. Above the gap frequency, however, the attenuation in the superconducting waveguide increases sharply. The attenuation eventually surpasses that in a normal waveguide. As frequency increases above the gap frequency, Cooper pairs break into quasiparticles. Hence, we attribute the sharp rise in attenuation to the increase in random collision of the quasiparticles with the lattice structure.

Chemical Synthesis of Circular Proteins*

Science.gov (United States)

Tam, James P.; Wong, Clarence T. T.

2012-01-01

Circular proteins, once thought to be rare, are now commonly found in plants. Their chemical synthesis, once thought to be difficult, is now readily achievable. The enabling methodology is largely due to the advances in entropic chemical ligation to overcome the entropy barrier in coupling the N- and C-terminal ends of large peptide segments for either intermolecular ligation or intramolecular ligation in end-to-end cyclization. Key elements of an entropic chemical ligation consist of a chemoselective capture step merging the N and C termini as a covalently linked O/S-ester intermediate to permit the subsequent step of an intramolecular O/S-N acyl shift to form an amide. Many ligation methods exploit the supernucleophilicity of a thiol side chain at the N terminus for the capture reaction, which makes cysteine-rich peptides ideal candidates for the entropy-driven macrocyclization. Advances in desulfurization and modification of the thiol-containing amino acids at the ligation sites to other amino acids add extra dimensions to the entropy-driven ligation methods. This minireview describes recent advances of entropy-driven ligation to prepare circular proteins with or without a cysteinyl side chain. PMID:22700959

15 CFR Supplement No. 5 to Part 742 - Checklist on Encryption and Other “Information Security” Functions

Science.gov (United States)

2010-01-01

... Part 742—Checklist on Encryption and Other “Information Security” Functions 1. Does your product... the following “information security” functions? (Mark with an “X” all that apply) a. __ encryption b...Information Securityâ Functions No. Supplement No. 5 to Part 742 Commerce and Foreign Trade Regulations...

CALCULATION OF FOUNDATIONS WITH CIRCULAR (CLOSED IN-PLANE SHAPES

Directory of Open Access Journals (Sweden)

L. S. Khasenevich

2017-01-01

Full Text Available It has been found that four reinforced concrete flue stacks being constructed in late 80-ies and early in 90-ies of the 20th century and being operated at various thermal power stations show practically no settlement, and this fact is not taken into account by any applicable regulatory documents. Foundations of these stacks were designed at the same time and they have been protected by patents of Russian Federation and Republic of Belarus. They represent circular bases made of reinforced concrete piles buried tightly together and forming so-called “slurry wall” with common monolithic reinforced concrete grillage. The grillage presents a direct extension of the stack shaft. One of these stacks has been built in Russia, and three – in Belarus. Due to significant differences in soil conditions and loads in each case, it is a fair assumption to say about regularity of the observed phenomenon. Notwithstanding the fact that circular foundations significantly decrease steel and concrete consumption, construction period and labour input, they have not yet received adequate attention from the side of scientific community and designers. While considering specific examples of the constructed stacks the paper reveals an opportunity to apply calculations which efficiently use passive soil resistance. The presented calculations and designs of the existing foundations make it possible to assess probability of the proposed methodology for the foundations which are analogous in design and which have closed in-plane structure not only for industrial buildings and structures.

Transitions in Theory and Practice: Managing Metals in the Circular Economy

Directory of Open Access Journals (Sweden)

Melissa Jackson

2014-07-01

Full Text Available Transitioning from current resource management practice dominated by linear economic models of consumption and production, to circular models of resource use, will require insights into the stages and processes associated with socio-technical transitions. This paper is concerned with transitions in practice. It explores two frameworks within the transitions literature—the multi-level perspective and transition management theory—for practical guidance to inform a deliberate transition in practice. The critical futures literature is proposed as a source of tools and methods to be used in conjunction with the transition frameworks to influence and enable transitions in practice. This enhanced practical guidance for initiating action is applied to a specific context—transitioning the Australian metals sector towards a circular economy model. This particular transition case study is relevant because the vision of a circular economy model of resource management is gaining traction internationally, Australia is significant globally as a supplier of finite mineral resources and it will also be used in a collaborative research project on Wealth from Waste to investigate possibilities for the circular economy and metals recycling.

Circular dichroism spectral data and metadata in the Protein Circular Dichroism Data Bank (PCDDB): a tutorial guide to accession and deposition.

Science.gov (United States)

Janes, Robert W; Miles, A J; Woollett, B; Whitmore, L; Klose, D; Wallace, B A

2012-09-01

The Protein Circular Dichroism Data Bank (PCDDB) is a web-based resource containing circular dichroism (CD) and synchrotron radiation circular dichroism spectral and associated metadata located at http://pcddb.cryst.bbk.ac.uk. This resource provides a freely available, user-friendly means of accessing validated CD spectra and their associated experimental details and metadata, thereby enabling broad usage of this material and new developments across the structural biology, chemistry, and bioinformatics communities. The resource also enables researchers utilizing CD as an experimental technique to have a means of storing their data at a secure site from which it is easily retrievable, thereby making their results publicly accessible, a current requirement of many grant-funding agencies world-wide, as well as meeting the data-sharing requirements for journal publications. This tutorial provides extensive information on searching, accessing, and downloading procedures for those who wish to utilize the data available in the data bank, and detailed information on deposition procedures for creating and validating entries, including comprehensive explanations of their contents and formats, for those who wish to include their data in the data bank. Copyright © 2012 Wiley Periodicals, Inc.

Scattering of inhomogeneous circularly polarized optical field and mechanical manifestation of the internal energy flows

DEFF Research Database (Denmark)

Bekshaev, A. Ya; Angelsky, O. V.; Hanson, Steen Grüner

2012-01-01

between the forward- and backward-scattered momentum fluxes in the Rayleigh scattering regime appears due to the spin part of the internal energy flow in the incident beam. The transverse ponderomotive forces exerted on dielectric and conducting particles of different sizes are calculated and special......Based on the Mie theory and on the incident beam model via superposition of two plane waves, we analyze numerically the momentum flux of the field scattered by a spherical, nonmagnetic microparticle placed within the spatially inhomogeneous circularly polarized paraxial light beam. The asymmetry...

Statistically based splicing detection reveals neural enrichment and tissue-specific induction of circular RNA during human fetal development.

Science.gov (United States)

Szabo, Linda; Morey, Robert; Palpant, Nathan J; Wang, Peter L; Afari, Nastaran; Jiang, Chuan; Parast, Mana M; Murry, Charles E; Laurent, Louise C; Salzman, Julia

2015-06-16

The pervasive expression of circular RNA is a recently discovered feature of gene expression in highly diverged eukaryotes, but the functions of most circular RNAs are still unknown. Computational methods to discover and quantify circular RNA are essential. Moreover, discovering biological contexts where circular RNAs are regulated will shed light on potential functional roles they may play. We present a new algorithm that increases the sensitivity and specificity of circular RNA detection by discovering and quantifying circular and linear RNA splicing events at both annotated and un-annotated exon boundaries, including intergenic regions of the genome, with high statistical confidence. Unlike approaches that rely on read count and exon homology to determine confidence in prediction of circular RNA expression, our algorithm uses a statistical approach. Using our algorithm, we unveiled striking induction of general and tissue-specific circular RNAs, including in the heart and lung, during human fetal development. We discover regions of the human fetal brain, such as the frontal cortex, with marked enrichment for genes where circular RNA isoforms are dominant. The vast majority of circular RNA production occurs at major spliceosome splice sites; however, we find the first examples of developmentally induced circular RNAs processed by the minor spliceosome, and an enriched propensity of minor spliceosome donors to splice into circular RNA at un-annotated, rather than annotated, exons. Together, these results suggest a potentially significant role for circular RNA in human development.

Dynamic stability analysis of circular arch subjected to follower forces with small disturbances; Judo kaju wo ukeru enkei arch no yuran ni yoru doteki kyodo to anteisei kaiseki

Energy Technology Data Exchange (ETDEWEB)

Fukuchi, N.; Okada, K. [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Hirano, Y. [Sumitomo Heavy Industries, Ltd., Tokyo (Japan)

1997-09-04

This paper describes the deformation and dynamic stability of circular arch subjected to follower forces in a submerged membrane type marine structure reinforced by arch frames. Governing equations for finite deformations of the circular arch subjected to follower forces are introduced using an embedded curve coordinate, which are formulated by applying Galerkin method. In addition, equations of motion due to small disturbances under given condition of loading are introduced. Based on these equations, dynamic stability of the arch is analyzed by means of Runnge-Kutta-Gill method, to clarify the relationship between disturbances and instability regions and the resulting phenomena. Near the boundary regions of stability, both amplitude and cycle of deformation are greatly affected by the amplitude of disturbances. The dynamic instability is governed by the inverse symmetry primary mode with minimum characteristic frequency which is specific for the circular arch. The dynamic stability has high parameter dependency, and the instability regions have a complicated shapes. Although flattened arch has a smaller static critical load, it provides the dynamic stability against the disturbance. 5 refs., 10 figs.

Synergies between agriculture and bioenergy in Latin American countries: A circular economy strategy for bioenergy production in Ecuador.

Science.gov (United States)

Vega-Quezada, Cristhian; Blanco, María; Romero, Hugo

2017-10-25

This study quantifies the synergies between agriculture and bioenergy considering biodiesel production as part of a set of systemic initiatives. We present a case study in Ecuador taking into account the recent government measures aimed at developing the bioenergy sector. Four scenarios have been evaluated through a newly designed systemic scheme of circular-economy initiatives. These scenarios encompass three production pathways covering three energy crops: palm oil (PO), microalgae in open ponds (M1) and microalgae in laminar photobioreactors (M2). We have applied Benefit-Cost Analysis (BCA) methodology considering the Net Present Value (NPV) and the Benefit-Cost Ratio (BCR) as the main evaluation criteria. In terms of private investment, biodiesel production from PO is more attractive than from M2. However, regarding efficiency and effectiveness of public funds, M2 is superior to PO because the public BCR and NPV are higher, and the pressure on agricultural land is lower. Moreover, M2 as part of a systemic approach presents a better carbon balance. These findings show that, under a systemic approach based on circular economy, strategies like the one analyzed in this study are economically feasible and may have a promising future. Copyright © 2016 Elsevier B.V. All rights reserved.

Researches Regarding The Circular Interpolation Algorithms At CNC Laser Cutting Machines

Science.gov (United States)

Tîrnovean, Mircea Sorin

2015-09-01

This paper presents an integrated simulation approach for studying the circular interpolation regime of CNC laser cutting machines. The circular interpolation algorithm is studied, taking into consideration the numerical character of the system. A simulation diagram, which is able to generate the kinematic inputs for the feed drives of the CNC laser cutting machine is also presented.

Analytical estimation of the dynamic apertures of circular accelerators

International Nuclear Information System (INIS)

Gao, J.

2000-02-01

By considering delta function sextupole, octupole, and deca-pole perturbations and using difference action-angle variable equations, we find some useful analytical formulae for the estimation of the dynamic apertures of circular accelerators due to single sextupole, single octupole, single deca-pole (single 2 m pole in general). Their combined effects are derived based on the Chirikov criterion of the onset of stochastic motions. Comparisons with numerical simulations are made, and the agreement is quite satisfactory. These formulae have been applied to determine the beam-beam limited dynamic aperture in a circular collider. (author)

Inflation of polymer melts into elliptic and circular cylinders

DEFF Research Database (Denmark)

Rasmussen, Henrik Koblitz; Christensen, Jens Horslund; Gøttsche, Søren

2000-01-01

A thin sheet (membrane) of the polymeric material is clamped between a Teflon-coated thermostated plate and a thermostated aluminium cylinder. By applying thermostated air through the plate, the polymer membrane deforms into an elliptic or a circular cylinder. The position of the top of the infla......A thin sheet (membrane) of the polymeric material is clamped between a Teflon-coated thermostated plate and a thermostated aluminium cylinder. By applying thermostated air through the plate, the polymer membrane deforms into an elliptic or a circular cylinder. The position of the top...

Characterization of a microfocused circularly polarized x-ray probe

International Nuclear Information System (INIS)

Pollmann, J.; Srajer, G.; Maser, J.; Lang, J. C.; Nelson, C. S.; Venkataraman, C. T.; Isaacs, E. D.

2000-01-01

We report on the development of a circularly polarized x-ray microprobe in the intermediate energy range from 5 to 10 keV. In this experiment linearly polarized synchrotron radiation was circularly polarized by means of a Bragg-diffracting diamond phase retarder and subsequently focused down to a spot size of about 4x2 μm 2 by a Fresnel zone plate. The properties of the microprobe were characterized, and the technique was applied to the two-dimensional mapping of magnetic domains in HoFe 2 . (c) 2000 American Institute of Physics

Electrically small circularly polarized spherical antenna with air core

DEFF Research Database (Denmark)

Kim, O. S.

2013-01-01

An electrically small circularly polarized self-resonant spherical antenna with air core is presented. The antenna is a modified multiarm spherical helix exciting TM10 and TE10 spherical modes with equal radiated power, and thus yielding perfect circular polarization over the entire far......-field sphere (except the polar regions, where the radiation is low). The self-resonance is achieved by exciting higher-order TM modes, which provide the necessary electric stored energy in the near-field, while contributing negligibly to the far-field radiation of the antenna. The antenna has electrical size...

Modeling and Simulation of Nonlinear Micro-electromechanical Circular Plate

Directory of Open Access Journals (Sweden)

Chin-Chia Liu

2013-09-01

Full Text Available In the present study, the hybrid differential transformation and finite difference method is applied to analyze the dynamic behavior of the nonlinear micro-electromechanical circular plate actuated by combined DC / AC loading schemes. The analysis takes account of the axial residual stress and hydrostatic pressure acting on micro circular plate upper surface. The dynamic response of the plate as a function of the magnitude of the AC driving voltage is explored. Moreover, the effect of the initial gap height on the pull-in voltage of the plate is systematically explored.

Capacitance of circular patch resonator

International Nuclear Information System (INIS)

Miano, G.; Verolino, L.; Naples Univ.; Panariello, G.; Vaccaro, V.G.; Naples Univ.

1995-11-01

In this paper the capacitance of the circular microstrip patch resonator is computed. It is shown that the electrostatic problem can be formulated as a system of dual integral equations, and the most interesting techniques of solutions of these systems are reviewed. Some useful approximated formulas for the capacitance are derived and plots of the capacitance are finally given in a wide range of dielectric constants

[Haikou issues circular on planned parenthood].

Science.gov (United States)

1981-02-03

The Organization Department of the Haikou Municipal CCP Committee, the municipal grain, finance, commerce, education bureau, personnel, public security, labor, civil affairs, public health, and housing bureaus, supply and marketing cooperative, and planned parenthood office recently issued a joint circular on implementing the provincial planned parenthood regulations. The circular demanded that the marriage registration and census system be seriously implemented. When people are registering for marriage, we must teach them to have only 1 child. We must give priority in housing and employment to an only child and his parents. When commercial, supply, and marketing departments are distributing coupons for fuel, and nonstaple food, they should supply a double amount to the only child. We must carry out serious health care for an only child and give them regular physical check-ups. When they are ill, hospitals should give them priority in registration, treatment, reservation of beds and medicines. The circular reiterated: We must seriously implement the stipulations on rewards and punishments contained in the provincial planned parenthood regulations. Cadres, staff, or workers who apply to have only 1 child must be given lump sums in addition to enjoying the relevant rewards stipulated by the regulations. Cadres, staff, workers, inhabitants, and commune workers who depend on state grain who violate the regulations must be punished according to the regulation. As for those who have 3 or more than 3 children, a 2nd child without planning, or an illegitimate child, the child's grain ration will be sold at negotiated price up to the age of 14. The grain department will distribute to them a supply ticket for negotiated price grain to buy grain in assigned grain shops. full text

Sistema de diagnóstico para la estimación de secciones en fallo en sistemas eléctricos de potencia; A Diagnostic Systems to Estimate Faulty Sections in Power Electric Systems

Directory of Open Access Journals (Sweden)

Marta Bravo de las Casas

2011-02-01

Full Text Available El sistema de diagnóstico para la estimación de secciones en fallo (SDESF para sistemas eléctricos depotencia (SEP expuesto en el trabajo, usa la información procedente de los relés operados e interruptoresdisparados. Está escrito en Prolog, lenguaje de inteligencia artificial e implementado en una computadorapersonal. La tarea básica de este sistema es entrenar a los despachadores y utilizarlo como una herramientade apoyo a la toma de decisiones del despachador ante situaciones de emergencias complejas con unambiente computacional de usuario amigable. Este sistema ha sido verificado prácticamente por pruebasrealizadas en el SEP del territorio central de Cuba y los resultados preliminares de las pruebas sugieren quepuede ser implementado para el entrenamiento de despachadores. Se ha demostrado la efectividad delsistema para identificar la localización del fallo muy eficientemente, por lo tanto, puede servir como uninstrumento valioso de ayuda para la localización de fallos, y puede ser usado en las universidades comomedio de enseñanza. El sistema en un futuro pudiera ser ampliado para conectarse al sistema Scada(Sircre-2 a tiempo real para la estimación de secciones en fallo on-line.  The diagnostic system to estimate faulty sections (DSEFS in power electric systems (PES shown in thework it uses the information coming from the relays and breakers operated. It is written in Prolog Language ofartificial Intelligence and implemented in a personal computer. The basic task of this system is to train thedispatchers and to use it like a support tool to the taking of the dispatcher's decisions before situations ofcomplex emergencies with an ambient computacional of friendly user. This system has been verified practicallyby tests carried out in the PES of the central territory of Cuba and the preliminary results of the tests suggestthat  it  can  be  implemented  for  the  training  of  dispatchers.  The  effectiveness  of  the

Circular dichroism beamline B23 at the Diamond Light Source.

Science.gov (United States)

Hussain, Rohanah; Jávorfi, Tamás; Siligardi, Giuliano

2012-01-01

Synchrotron radiation circular dichroism (SRCD) is a well established technique in structural biology. The first UV-VIS beamline, dedicated to circular dichroism, at Diamond Light Source Ltd, a third-generation synchrotron facility in south Oxfordshire, UK, has recently become operational and it is now available for the user community. Herein the main characteristics of the B23 SRCD beamline, the ancillary facilities available for users, and some of the recent advances achieved are summarized.

Circular, explosion-proof lamp provides uniform illumination

Science.gov (United States)

1966-01-01

Circular explosion-proof fluorescent lamp is fitted around a TV camera lens to provide shadowless illumination with a low radiant heat flux. The lamp is mounted in a transparent acrylic housing sealed with clear silicone rubber.

A growth factor signaling cascade confined to circular ruffles in macrophages

Directory of Open Access Journals (Sweden)

Timothy P. Welliver

2012-06-01

The formation of macropinosomes requires large-scale movements of membranes and the actin cytoskeleton. Over several minutes, actin-rich surface ruffles transform into 1–5 µm diameter circular ruffles, which close at their distal margins, creating endocytic vesicles. Previous studies using fluorescent reporters of phosphoinositides and Rho-family GTPases showed that signals generated by macrophages in response to the growth factor Macrophage Colony-Stimulating Factor (M-CSF appeared transiently in domains of plasma membrane circumscribed by circular ruffles. To address the question of how signaling molecules are coordinated in such large domains of plasma membrane, this study analyzed the relative timing of growth factor-dependent signals as ruffles transformed into macropinosomes. Fluorescent protein chimeras expressed in macrophages were imaged by microscopy and quantified relative to circular ruffle formation and cup closure. The large size of macropinocytic cups allowed temporal resolution of the transitions in phosphoinositides and associated enzyme activities that organize cup closure. Circular ruffles contained transient and sequential spikes of phosphatidylinositol (4,5-bisphosphate (PI(4,5P2, phosphatidylinositol (3,4,5-trisphosphate (PIP3, diacylglycerol, PI(3,4P2, PI(3P and the activities of protein kinase C-α, Rac1, Ras and Rab5. The confinement of this signal cascade to circular ruffles indicated that diffusion barriers present in these transient structures focus feedback activation and deactivation of essential enzyme activities into restricted domains of plasma membrane.

Detection of circular telomeric DNA without 2D gel electrophoresis.

Science.gov (United States)

Dlaska, Margit; Anderl, Conrad; Eisterer, Wolfgang; Bechter, Oliver E

2008-09-01

The end of linear chromosomes forms a lasso-like structure called the t-loop. Such t-loops resemble a DNA recombination intermediate, where the single-stranded 3' overhang is arrested in a stretch of duplex DNA. Presumably, such a t-loop can also be deleted via a recombination process. This would result in the occurrence of circular extrachromosomal telomeric DNA (t-circles), which are known to be abundantly present in immortal cells engaging the recombination-based alternative lengthening of telomeres pathway (ALT pathway). Little is known about the basic mechanism of telomeric recombination in these cells and what ultimately causes the generation of such t-circles. Current standard procedures for detecting these molecules involve 2D gel electrophoresis or electron microscopy. However, both methods are labor intense and sophisticated to perform. Here, we present a simpler, faster, and equally sensitive method for detecting t-circles. Our approach is a telomere restriction fragment assay that involves the enzymatic preservation of circular DNA with Klenow enzyme followed by Bal31 degradation of the remaining linear DNA molecules. We show that with this approach t-circles can be detected in ALT cell lines, whereas no t-circles are present in telomerase-positive cell lines. We consider our approach a valid method in which t-circle generation is the experimental readout.

Investigation of enhanced condensation heat transfer outside vertical titanium circularly-grooved tube

International Nuclear Information System (INIS)

Zhaorigetu; Huang Weitang; Lv Xiangbo; Liu Feng

2005-01-01

The investigation of enhanced condensation heat transfer had been conducted on the outside vertical Titanium circularly-grooved tube. The experimental result indicates that the Titanium circularly-grooved tube is fairly efficient in enhancing the heat transfer. Within the experimental scope, the total heat transfer coefficient of the optimum circularly-grooved tube is 1.12 to 1.36 times of that of the Titanium smooth tube. Through regression analysis on the experimental data, the experimental correlations for the inside heat transfer coefficient, the condensation heat transfer coefficient on film condensation and the friction coefficient were achieved. (authors)

Circular RNAs in cancer

DEFF Research Database (Denmark)

Kristensen, L S; Hansen, T B; Venø, M T

2018-01-01

Circular RNA (circRNA) is a novel member of the noncoding cancer genome with distinct properties and diverse cellular functions, which is being explored at a steadily increasing pace. The list of endogenous circRNAs involved in cancer continues to grow; however, the functional relevance of the vast...... for circRNA cancer research and current caveats, which must be addressed to facilitate the translation of basic circRNA research into clinical use.Oncogene advance online publication, 9 October 2017; doi:10.1038/onc.2017.361....

Shear stresses around circular cylindrical openings

NARCIS (Netherlands)

Hoogenboom, P.C.J.; Van Weelden, C.; Blom, C.M.B.

2010-01-01

In this paper stress concentrations are studied around circular cylindrical openings or voids in a linear elastic continuum. The loading is such that a uniform shear stress occurs in the continuum, which is disturbed by the opening. The shear stress is in the direction of the centre axis of the

Economic Development Mode and Countermeasure Research on the Nansi Lake Drainage Area Based on Circular Economy

OpenAIRE

Jia, Yong-fei; Peng, Li-min

2011-01-01

Firstly, it is pointed out that circular economy should be vigorously developed in the Nansi Lake Drainage Area, and the connotation of circular economy is expounded. Then, problems in developing circular economy in Nansi Lake Drainage Area are analyzed from the aspects of agriculture, industrial enterprises, and waste utilization. Finally, combining with the four modes of peasant household, enterprise, region and society in the development of circular economy, corresponding countermeasures a...

The emergent role of digital technologies in the Circular Economy: A review

DEFF Research Database (Denmark)

Pagoropoulos, Aris; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2017-01-01

Digital technologies have enabled the formulation of multiple Product Service-Systems (PSS) with considerable economic, environmental and societal benefits. One of the most promising paradigms, which is inspired by business models and value propositions that have already been described in the PSS....... The study concludes by identifying research gaps, reflecting on the application of digital technologies in the field of PSS and proposing suggestions for future research....... literature, is the concept of Circular Economy. Circular Economy is characterized as an economy that is restorative and regenerative by design and is attracting significant attention from researchers and policy makers alike. In light of the recent proliferation of digital technologies such as Big Data...... and the Internet of Things, this article attempts to identify how can digital technologies support the transition to Circular Economy. This article conducted a systematic review of the literature based on a review protocol, in an effort to evaluate the application of key digital technologies in Circular Economy...

Magnetic induction strength on surface of a ferro-medium circular cylinder

Directory of Open Access Journals (Sweden)

M. Jin

2016-09-01

Full Text Available Based on the Ampere molecular current hypothesis and the Biot–Savart law, a magnetic model on the metal magnetic memory (MMM testing of a specimen is proposed. Relation between magnetic flux leakage (MFL and magnetization of a ferro-medium circular cylinder is set up. We can predict magnetization of material according to the MFL on surface of the circular cylinder.

The effect of brain hematoma location on volumetric inductive phase shift spectroscopy of the brain with circular and magnetron sensor coils: a numerical simulation study

International Nuclear Information System (INIS)

Rojas, R; González, C A; Rubinsky, B

2008-01-01

This numerical simulation study addressed the effects of the location of a discrete brain hematoma on the volumetric inductive phase shift of the brain measured with an induction circular sensor coil and an induction magnetron sensor coil. The theoretical study simulates the brain cavity as a circular sphere transversely centered with respect to the circular and magnetron sensor coils. As a case study for the effects of hematoma location, we employed similar size simulated spherical hematomas placed at three different positions from the center of the brain outward. A three-dimensional finite element analysis of the field equations in the frequency range from 100 kHz to 100 MHz revealed a substantial effect of hematoma location on the ability of both the circular and magnetron sensors to detect the hematomas. In particular it was found that there are frequencies, which may be related to resonance, at which the occurrence of the hematomas has no effect on the volumetric inductive phase shift of the brain. Furthermore it was found that the relative sensitivity of circular and magnetron sensor coils with respect to the occurrence of hematoma varies with the location of the hematoma

Biological processes for advancing lignocellulosic waste biorefinery by advocating circular economy.

Science.gov (United States)

Liguori, Rossana; Faraco, Vincenza

2016-09-01

The actualization of a circular economy through the use of lignocellulosic wastes as renewable resources can lead to reduce the dependence from fossil-based resources and contribute to a sustainable waste management. The integrated biorefineries, exploiting the overall lignocellulosic waste components to generate fuels, chemicals and energy, are the pillar of the circular economy. The biological treatment is receiving great attention for the biorefinery development since it is considered an eco-friendly alternative to the physico-chemical strategies to increase the biobased product recovery from wastes and improve saccharification and fermentation yields. This paper reviews the last advances in the biological treatments aimed at upgrading lignocellulosic wastes, implementing the biorefinery concept and advocating circular economy. Copyright © 2016 Elsevier Ltd. All rights reserved.

Circularly organized quantum dot nanostructures of Ge on Si substrates

International Nuclear Information System (INIS)

Cai, Qijia; Chen, Peixuan; Zhong, Zhenyang; Jiang, Zuimin; Lu, Fang; An, Zhenghua

2009-01-01

A novel circularly arranged structure of germanium quantum dots has been fabricated by combining techniques including electron beam lithography, wet etching and molecular beam epitaxy. It was observed that both pattern and growth parameters affect the morphology of the quantum dot molecules. Meanwhile, the oxidation mask plays a vital role in the formation of circularly organized quantum dots. The experimental results demonstrate the possibilities of investigating the properties of quantum dot molecules as well as single quantum dots

Injection and extraction techniques in circular accelerators

International Nuclear Information System (INIS)

Tang Jingyu

2008-01-01

Injection and extraction are usually the key systems in circular accelerators. They play important roles in transferring the beam from one stage acceleration to the other or to experimental stations. It is also in the injection and extraction regions where beam losses happen mostly. Due to the tight space and to reduce the perturbation to the circulating orbit, the devices are usually designed to meet special requirements such as compactness, small stray field, fast rise time or fall time, etc. Usual injection and extraction devices include septum magnets, kicker magnets, electrostatic deflectors, slow bump magnets and strippers. In spite of different accelerators and specification for the injection and extraction devices, many techniques are shared in the design and manufacturing. This paper gives a general review on the techniques employed in the major circular accelerators in China. (authors)

Propelling plastics into the circular economy - weeding out the toxics first.

Science.gov (United States)

Leslie, H A; Leonards, P E G; Brandsma, S H; de Boer, J; Jonkers, N

2016-09-01

The Stockholm Convention bans toxic chemicals on its persistent organic pollutants (POPs) list in order to promote cleaner production and prevent POPs accumulation in the global environment. The original 'dirty dozen' set of POPs has been expanded to include some of the brominated diphenyl ether flame retardants (POP-BDEs). In addition to cleaner production, there is an urgent need for increased resource efficiency to address the finite amount of raw materials on Earth. Recycling plastic enhances resource efficiency and is part of the circular economy approach, but how clean are the materials we are recycling? With the help of a new screening method and detailed analyses, we set out to investigate where these largely obsolete BDEs were showing up in Dutch automotive and electronics waste streams, calculate mass flows and determine to what extent they are entering the new product chains. Our study revealed that banned BDEs and other toxic flame retardants are found at high concentrations in certain plastic materials destined for recycling markets. They were also found in a variety of new consumer products, including children's toys. A mass flow analysis showed that 22% of all the POP-BDE in waste electrical and electronic equipment (WEEE) is expected to end up in recycled plastics because these toxic, bioaccumulative and persistent substances are currently not effectively separated out of plastic waste streams. In the automotive sector, this is 14%, while an additional 19% is expected to end up in second-hand parts (reuse). These results raise the issue of delicate trade-offs between consumer safety/cleaner production and resource efficiency. As petroleum intensive materials, plastic products ought to be repaired, reused, remanufactured and recycled, making good use of the 'inner circles' of the circular economy. Keeping hazardous substances - whether they are well known POPs or emerging contaminants - out of products and plastic waste streams could make these

Optical force and torque on a dielectric Rayleigh particle by a circular Airy vortex beam

Science.gov (United States)

Chen, Musheng; Huang, Sujuan; Shao, Wei; Liu, Xianpeng

2018-03-01

Optical force and torque exerted on the Rayleigh particles by tightly focused circularly polarized circular Airy vortex beams (CAVB) in the far field are studied in this paper. The relation between parameters of circularly polarized CAVB and the trapping properties is numerically analyzed based on Rayleigh models and the Debye diffraction theory. The results show that both the high refractive index and low refractive index particles can be fully stably trapped in three dimensions by circularly polarized CAVB. The parameters of circularly polarized CAVB greatly affect the optical force. The longitudinal and transverse gradient force increase with the increase of decay factor and scaling factor, and decrease with the increase of the radius of the first primary ring and topological charges. The positions of the longitudinal stable equilibrium move toward the high numerical aperture lens when the scaling factor and the radius of the primary ring increase. The trapping range is broadened with the decrease of scaling factor. The optical orbital torque (OOT) of circularly polarized CAVB has circular symmetry and remains positive or negative. With the increase of topological charges, the peak value of OOT first increases and then decreases after reaches a maximum. These results are useful for optical trapping, optical levitation and particle acceleration.

A circular aperture array for ultrasonic tomography and quantitative NDE

Energy Technology Data Exchange (ETDEWEB)

Nielsen, S A

1998-08-01

The main topics of this thesis are ultrasonic tomography and ultrasonic determination of elastic stiffness constants. Both issues are based on a synthetic array with transducer elements distributed uniformly along a circular aperture, i.e., a circular aperture array. The issues are treated both theoretically and experimentally by broadband pulse techniques. Ultrasonic tomography, UCT, from a circular aperture is a relatively new imaging technique in Non-destructive Evaluation (NDE) to acquire cross sectional images in bulk materials. A filtered back-projection algorithm is used to reconstruct images in four different experiments and results of attenuation, velocity and reflection tomograms in Plexiglas of AlSi-alloy cylinders are presented. Two kinds of ultrasonic tomography are introduced: bistatic and monostatic imaging. Both techniques are verified experimentally by Plexiglas cylinders. Different reconstruction artifacts are discussed and theoretical resolution constraints are discussed for various configurations of the circular aperture array. The monostatic technique is used in volumetric imaging. In the experimental verification artificial and real discontinuities in a cylindrical AlSi-alloy are compared with similar discontinuities in a Plexiglas specimen. Finally, some limitations to UCT are discussed. The circular aperture array is used to determine five independent elastic stiffness constants of a unidirectional glass/PET (Poly Ethylene Teraphtalate) laminate. Energy flux propagation and attenuation of ultrasonic waves are considered and velocity surfaces are calculated for different planes of interest. Relations between elastic stiffness constants and engineering constants (i.e., Young`s moduli, shear moduli and Poisson`s ratios) are discussed for an orthotropic composite. Six micromechanical theories are reviewed, and expressions predicting the elastic engineering constants are evaluated. The micromechanical predicted elastic stiffness constants for the

Análise retrospectiva dos traumas faciais associados aos traumas cervicais dos pacientes atendidos na área de Cirurgia Buco-maxilo-facial da Faculdade de Odontologia de Piracicaba - UNICAMP, no período de 1999 a 2009

OpenAIRE

Paulo Maria Santos Rabêlo Junior

2011-01-01

Resumo: Este trabalho foi baseado em um estudo observacional, seccional, retrospectivo do tipo caso-controle, com o objetivo de analisar a prevalência e características epidemiológicas da associação entre traumas faciais e traumas cervicais nos pacientes atendidos pela Área de Cirurgia Buco-Maxilo-Facial da Faculdade de Odontologia de Piracicaba (FOP)-Unicamp, na cidade de Piracicaba e região, no período de abril de 1999 a dezembro de 2009. Um total de 3095 pacientes com trauma facial foi inc...

Determinación del tiempo equivalente acumulado durante los ciclos de esterilización, por vapor saturado, en un fermentador empleado en la producción de vacunas.

Directory of Open Access Journals (Sweden)

Jorge A. Padrón

2001-03-01

Full Text Available Se realizó una revisión acerca de la esterilidad y de los procesos de esterilización en equipos empleados a escala de producción. Se describe el concepto de Fo y su empleo en la evaluación de la efectividad de un proceso de esterilización. Se estudió el perfil de temperatura en diferentes secciones del fermentador durante los ciclos de esterilización, encontrándose algunas secciones en las cuales el tiempo equivalente no era suficiente por lo que se propusieron modificaciones, que luego de ejecutadas permitieron obtener resultados satisfactorios.

Embedding the Circular Economy in Investment Decision-making for Capital Assets – A Business Case Framework

NARCIS (Netherlands)

Korse, M.; Ruitenburg, Richard Jacob; Toxopeus, Marten E.; Braaksma, Anne Johannes Jan

2016-01-01

Industry shows an increasing interest in the circular economy. However, circularity for physical capital assets is still ill-defined and existing models are complex and information dependent hindering implementation. This paper addresses these gaps by operationalizing circular economy principles and

76 FR 18624 - Research, Technical Assistance and Training Programs: Notice of Final Circular

Science.gov (United States)

2011-04-04

... to FTA Circular 6100.1D, Research and Technical Assistance Training Program: Application Instructions... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Research, Technical Assistance and Training Programs: Notice of Final Circular AGENCY: Federal Transit Administration (FTA), DOT. ACTION...

Identification of Circular RNAs From the Parental Genes Involved in Multiple Aspects of Cellular Metabolism in Barley

Directory of Open Access Journals (Sweden)

Behrooz eDarbani

2016-06-01

Full Text Available RNA circularization made by head-to-tail back-splicing events is involved in the regulation of gene expression from transcriptional to post-translational levels. By exploiting RNA-Seq data and down-stream analysis, we shed light on the importance of circular RNAs in plants. The results introduce circular RNAs as novel interactors in the regulation of gene expression in plants and imply the comprehensiveness of this regulatory pathway by identifying circular RNAs for a diverse set of genes. These genes are involved in several aspects of cellular metabolism as hormonal signaling, intracellular protein sorting, carbohydrate metabolism and cell-wall biogenesis, respiration, amino acid biosynthesis, transcription and translation, and protein ubiquitination. Additionally, these parental loci of circular RNAs, from both nuclear and mitochondrial genomes, encode for different transcript classes including protein coding transcripts, microRNA, rRNA, and long non-coding/microprotein coding RNAs. The results shed light on the mitochondrial exonic circular RNAs and imply the importance of circular RNAs for regulation of mitochondrial genes. Importantly, we introduce circular RNAs in barley and elucidate their cellular-level alterations across tissues and in response to micronutrients iron and zinc. In further support of circular RNAs' functional roles in plants, we report several cases where fluctuations of circRNAs do not correlate with the levels of their parental-loci encoded linear transcripts.Keywords: circular RNAs, coding and non-coding transcripts, leaves, seeds, transfer cells, micronutrients, mitochondria

Análise comparativa da resistência de fêmures de cães após a confecção de janelas ósseas circular e quadrada Comparative analysis of dog femur resistance after receiving circular and square holes

Directory of Open Access Journals (Sweden)

Olavo Pires de Camargo

2002-06-01

Full Text Available Com o objetivo de avaliar o enfraquecimento causado pela confecção de janela óssea cortical, os autores confeccionaram uma janela circular no osso cortical da diáfise de oito fêmures de carcaças de cães e uma janela quadrada nos oito pares destes fêmures, com diagonal semelhante ao diâmetro da janela circular contralateral. As peças anatômicas foram submetidas a teste de tensão torcional em uma máquina de ensaios mecânicos; obtendo-se o torque máximo e a rigidez à torção. Os resultados mostraram que, para o fêmur com janela circular, o torque máximo médio foi de 13,65 ± 5,12 Nm, e a rigidez média foi de 1,18 ± 0,45 Nm/grau, enquanto que para a janela quadrada o torque máximo médio foi de 13, 39 ± 5,23 Nm, e a rigidez média foi de 1,05 ± 0,41 Nm/grau. A resistência nos ossos com janela circular e quadrada submetidos à tensão torcional foi praticamente igual, fato este corroborado pela análise estatística que não revelou diferença significante (p = 0,05.With the purpose of evaluating the weakness caused by holes in the cortical bone, the authors performed circular holes in the diaphysis cortical bone of eight femurs from dog carcasses, and square holes in the diaphysis cortical bone of the contralateral femurs, the diagonals being similar to the diameters. The specimens were submitted to torsion stress test in a mechanical test machine to determine maximum torque and rigidity to torsion. Maximum mean torque for the femurs with circular holes was 13.65 ± 5.12 Nm and mean rigidity was 1.18 ± 0.45 Nm/degree, while the femurs with square holes showed maximum mean torque of 13.39 ± 5.23 Nm and mean rigidity of 1.05 ± 0.41 Nm/degree. The resistance to torsion stress in femurs with circular or square holes was very similar and the statistical analysis did not show a significant difference (p = 0.05.

Innermost stable circular orbit of Kerr-MOG black hole

Energy Technology Data Exchange (ETDEWEB)

Lee, Hyun-Chul; Han, Yong-Jin [Soonchunhyang University, Department of Physics, Asan (Korea, Republic of)

2017-10-15

We study the innermost stable circular orbit (ISCO) of the metric of the Kerr black hole in modified gravity (Kerr-MOG black hole), which is one of the exact solutions of the field equation of modified gravity in the strong gravity regime. The Kerr-MOG metric is constructed; it is the commonly known Kerr metric in Boyer-Lindquist coordinates by adding a repulsive term like the Yukawa force, which is explained in quantum gravity. In this paper, we numerically calculate the circular orbit of a photon and the ISCO of a test particle of Kerr-MOG black holes. (orig.)

Phase Radiation Characteristics of an Open-Ended Circular Waveguide

DEFF Research Database (Denmark)

Shishkova, A.V.; Pivnenko, Sergiy; Kim, O.S.

2002-01-01

Analytic expressions for phase radiation characteristics of a semi-infinite open-ended circular waveguide regardless of its aperture size and operating frequency have been obtained making use of the rigorous Weinstein's theory. The analysis of phase radiation patterns has been carried out...... for the dominant mode (TE11) as well as for the high order modes TM01 and TE01, both for a single and multimode propagation. The measurement of radiation characteristics of an open-ended circular waveguide has been carried out at the DTU-ESA Spherical Near-Field Antenna Test Facility. It is shown...

Equipotential doming in flooded circular basins on the moon

Science.gov (United States)

Roth, L. E.; Elachi, C.; Phillips, R. J.

1977-01-01

A procedure is presented that permits determination of the shape of the gravity field due to an arbitrary mass configuration with circular symmetry. The procedure is used to model the shape of the field associated with the lunar circular basins. The mean slopes of the equipotential surfaces generated by a superisostatic deposit corresponding to a near-surface Crisium-size mascon are calculated to fall within the range from 1:700 to 1:1000; those generated by a mantle rebound of the same excess mass, at 60 km below the lunar surface, cluster around the value of 1:1500.

Modeling magnetic circular dichroism within the polarizable embedding approach

DEFF Research Database (Denmark)

Nørby, Morten Steen; Coriani, Sonia; Kongsted, Jacob

2018-01-01

Magnetic circular dichroism (MCD) is defined as the differential absorption of left and right circularly polarized light in a sample subjected to an external magnetic field. In order to interpret the results of MCD measurements, theoretical predictions of key MCD parameters can be of utmost...... importance. From an experimental point of view, MCD spectra of molecules are often measured in an environment and most notably in a solution. Thus, it may be very important that the method used to predict the MCD parameters is able to correctly account for medium effects. In this paper, we investigate...

78 FR 14620 - Joint Development: Proposed Circular

Science.gov (United States)

2013-03-06

... development. This circular provides guidance to recipients of Federal Transit Administration (FTA) financial... of opportunities for private sector participation in public transportation projects, and includes the... ``value capture'' mechanisms, such as income derived from rental or lease payments, and private sector...

77 FR 42077 - Environmental Justice: Final Circular

Science.gov (United States)

2012-07-17

..., rulemaking, and policy formulation. The DOT Order sets forth steps to prevent disproportionately high and... Circular as a whole. Some commenters expressed concerns about perceived administrative and financial... Engagement With Environmental Justice Populations Chapter III contains recommended strategies and techniques...

Large circular dichroism and optical rotation in titanium doped chiral silver nanorods

Energy Technology Data Exchange (ETDEWEB)

Titus, Jitto; Perera, A.G. Unil [Department of Physics and Astronomy, Optoelectronics Laboratory, GSU, Atlanta, GA (United States); Larsen, George; Zhao, Yiping [Department of Physics and Astronomy, Nanolab, UGA, Athens, GA (United States)

2016-10-15

The circular dichroism of titanium-doped silver chiral nanorod arrays grown using the glancing angle deposition (GLAD) method is investigated in the visible and near infrared ranges using transmission ellipsometry and spectroscopy. These films are found to have significant circular polarization effects across broad ranges of the visible to NIR spectrum, including large values for optical rotation. The characteristics of these circular polarization effects are strongly influenced by the morphology of the deposited arrays. Thus, the morphological control of the optical activity in these nanostructures demonstrates significant optimization capability of the GLAD technique for fabricating chiral plasmonic materials. (copyright 2016 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Methodology for appreciation the manufacturing castings from perspective of circular economy

Science.gov (United States)

Soporan, V. F.; Crișan, M.; Lehene, T.; Pop, A. L.

2016-06-01

This paper presents a methodology for studying the trends toward developing circular economy, comprising the following steps: description the field analyzed statistically and technological, establishing assessment criteria, establishing the event which will be analyzed and its description and evaluation of the event from the perspective of circular economy. The case study was designed to the manufacture castings through the analysis, after the methodology proposed, by the work of the 71-th World Foundry Congress in 2014 from Bilbao. The conclusion of this approach shows us that the manufacture castings through the trends expressed fall in the principles of circular economy. At the level of resources needed for the manufacturing process of castings - specifically immaterial resources, materials and energy, are analyzed at all levels, specific phases, namely: 1. Information analysis specific for the field; 2. Analysis preparation in terms of manufacturing technology and technological infrastructure available; 3. Analysis of manufacturing castings; 4. Analysis of the results of the manufacturing process; 5. Analysis of exploitation and disposal at end of life cycle; 6. Analysis of other phases that contribute to achieving castings; 7. Analysis of the entire process in terms of respecting the environment and sustainable development. The analysis method on a field belonging to the specific requirements of circular economy is made by analyzing a global event. This comprises the following stages: Establish specific criteria for the analyzed domain in relation to the circular economy; Specifying event works falling within the criteria set, which will be analyzed, and justification for selection.

Magnetohydrodynamic flow past a circular cylinder

International Nuclear Information System (INIS)

Swarup, S.; Sinha, P.C.

1977-01-01

This paper deals with the slow-flow problem of an incompressible, viscous, electrically conducting fluid past a circular cylinder in an alignment magnetic field. The solutions for the velocity and magnetic fields as sought by the method of matched asymptotic expansions under the assumptions R,Rsub(m) 2 ) and O(R/log M), respectively. (Auth.)

Concentric circular ring and nanodisk optical antenna enhanced multispectral quantum dot infrared photodetector with spectral localization

International Nuclear Information System (INIS)

Zhang, Yingjie; Kemsri, Thitikorn; Li, Lin; Lu, Xuejun; Gu, Guiru

2017-01-01

In this paper, we report a concentric circular ring and nanodisk plasmonic optical antenna (POA) enhanced multispectral quantum dot infrared photodetector (QDIP). The circular ring and the nanodisk POA structures are designed to have plasmonic resonant wavelengths in the longwave infrared (LWIR) and the midwave infrared (MWIR) spectral regimes, respectively. The electric field ( E -field) distributions are simulated and show spectral localization due to the distinct plasmonic resonant wavelengths of the POA structures. The circular ring is found to enhance the E -fields in the nanodisk regions due to the mutual coupling. A concentric circular ring and nanodisk POA enhanced multispectral QDIP was fabricated and tested. Multispectral enhancement was observed. The enhancement is compared to that of a QDIP with only the circular ring POA structure. The experiment data agree with the simulation. The concentric circular ring and nanodisk POA provides a compact planar structure for multispectral QDIP enhancement. (paper)

Multiband Circular Polarizer Based on Fission Transmission of Linearly Polarized Wave for X-Band Applications

Directory of Open Access Journals (Sweden)

Farman Ali Mangi

2016-01-01

Full Text Available A multiband circular polarizer based on fission transmission of linearly polarized wave for x-band application is proposed, which is constructed of 2 × 2 metallic strips array. The linear-to-circular polarization conversion is obtained by decomposing the linearly incident x-polarized wave into two orthogonal vector components of equal amplitude and 90° phase difference between them. The innovative approach of “fission transmission of linear-to-circular polarized wave” is firstly introduced to obtain giant circular dichroism based on decomposition of orthogonal vector components through the structure. It means that the incident linearly polarized wave is converted into two orthogonal components through lower printed metallic strips layer and two transmitted waves impinge on the upper printed strips layer to convert into four orthogonal vector components at the end of structure. This projection and transmission sequence of orthogonal components sustain the chain transmission of electromagnetic wave and can achieve giant circular dichroism. Theoretical analysis and microwave experiments are presented to validate the performance of the structure. The measured results are in good agreement with simulation results. In addition, the proposed circular polarizer exhibits the optimal performance with respect to the normal incidence. The right handed circularly polarized wave is emitted ranging from 10.08 GHz to 10.53 GHz and 10.78 GHz to 11.12 GHz, while the left handed circular polarized wave is excited at 10.54 GHz–10.70 GHz and 11.13 GHz–11.14 GHz, respectively.

Sensing site-specific structural characteristics and chirality using vibrational circular dichroism of isotope labeled peptides.

Science.gov (United States)

Keiderling, Timothy A

2017-12-01

Isotope labeling has a long history in chemistry as a tool for probing structure, offering enhanced sensitivity, or enabling site selection with a wide range of spectroscopic tools. Chirality sensitive methods such as electronic circular dichroism are global structural tools and have intrinsically low resolution. Consequently, they are generally insensitive to modifications to enhance site selectivity. The use of isotope labeling to modify vibrational spectra with unique resolvable frequency shifts can provide useful site-specific sensitivity, and these methods have been recently more widely expanded in biopolymer studies. While the spectral shifts resulting from changes in isotopic mass can provide resolution of modes from specific parts of the molecule and can allow detection of local change in structure with perturbation, these shifts alone do not directly indicate structure or chirality. With vibrational circular dichroism (VCD), the shifted bands and their resultant sign patterns can be used to indicate local conformations in labeled biopolymers, particularly if multiple labels are used and if their coupling is theoretically modeled. This mini-review discusses selected examples of the use of labeling specific amides in peptides to develop local structural insight with VCD spectra. © 2017 Wiley Periodicals, Inc.

In-line production of a bi-circular field for generation of helically polarized high-order harmonics

Energy Technology Data Exchange (ETDEWEB)

Kfir, Ofer, E-mail: ofertx@technion.ac.il, E-mail: oren@si.technion.ac.il; Bordo, Eliyahu; Ilan Haham, Gil; Lahav, Oren; Cohen, Oren, E-mail: ofertx@technion.ac.il, E-mail: oren@si.technion.ac.il [Solid State Institute and Physics Department, Technion, Haifa 32000 (Israel); Fleischer, Avner [Solid State Institute and Physics Department, Technion, Haifa 32000 (Israel); Department of Physics and Optical Engineering, Ort Braude College, Karmiel 21982 (Israel)

2016-05-23

The recent demonstration of bright circularly polarized high-order harmonics of a bi-circular pump field gave rise to new opportunities in ultrafast chiral science. In previous works, the required nontrivial bi-circular pump field was produced using a relatively complicated and sensitive Mach-Zehnder-like interferometer. We propose a compact and stable in-line apparatus for converting a quasi-monochromatic linearly polarized ultrashort driving laser field into a bi-circular field and employ it for generation of helically polarized high-harmonics. Furthermore, utilizing the apparatus for a spectroscopic spin-mixing measurement, we identify the photon spins of the bi-circular weak component field that are annihilated during the high harmonics process.

Near shot-noise limited time-resolved circular dichroism pump-probe spectrometer

Science.gov (United States)

Stadnytskyi, Valentyn; Orf, Gregory S.; Blankenship, Robert E.; Savikhin, Sergei

2018-03-01

We describe an optical near shot-noise limited time-resolved circular dichroism (TRCD) pump-probe spectrometer capable of reliably measuring circular dichroism signals in the order of μdeg with nanosecond time resolution. Such sensitivity is achieved through a modification of existing TRCD designs and introduction of a new data processing protocol that eliminates approximations that have caused substantial nonlinearities in past measurements and allows the measurement of absorption and circular dichroism transients simultaneously with a single pump pulse. The exceptional signal-to-noise ratio of the described setup makes the TRCD technique applicable to a large range of non-biological and biological systems. The spectrometer was used to record, for the first time, weak TRCD kinetics associated with the triplet state energy transfer in the photosynthetic Fenna-Matthews-Olson antenna pigment-protein complex.

Particle transport across a circular shear layer with coherent structures

International Nuclear Information System (INIS)

Nielsen, A.H.; Lynov, J.P.; Juul Rasmussen, J.

1998-01-01

In the study of the dynamics of coherent structures, forced circular shear flows offer many desirable features. The inherent quantisation of circular geometries due to the periodic boundary conditions makes it possible to design experiments in which the spatial and temporal complexity of the coherent structures can be accurately controlled. Experiments on circular shear flows demonstrating the formation of coherent structures have been performed in different physical systems, including quasi-neutral plasmas, non-neutral plasmas and rotating fluids. In this paper we investigate the evolution of such coherent structures by solving the forced incompressible Navier-Stokes equations numerically using a spectral code. The model is formulated in the context of a rotating fluid but apply equally well to low frequency electrostatic oscillations in a homogeneous magnetized plasma. In order to reveal the Lagrangian properties of the flow and in particular to investigate the transport capacity in the shear layer, passive particles are traced by the velocity field. (orig.)

Nonlinear spin-up in a circular cylinder

NARCIS (Netherlands)

van de Konijnenberg, J.A.; Heijst, van G.J.F.

1995-01-01

Nonlinear spin-up in a circular cylindrical tank is investigated experimentally and compared with the Wedemeyer model. The experiments were performed with water, using tracer particles floating at the free surface in order to visualize the flow field. The experimentally determined vorticity profiles

Breaking the Barriers to the Circular Economy

NARCIS (Netherlands)

Kirchherr, J.W.; Hekkert, M.P.; Bour, Ruben; Huijbrechtse-Truijens, Anne; Kostense-Smit, Erica; Muller, Jennifer

2017-01-01

The Copernicus Institute of Sustainable Development, Utrecht University, the Netherlands and Deloitte have jointly carried out research on barriers to the Circular Economy (CE) in the European Union. For this research, a survey with 153 businesses, 55 government officials and expert interviews with

Falling aprons at circular piers under currents

NARCIS (Netherlands)

De Sonneville, B.; Van Velzen, G.; Verheij, H.J.; Dorst, K.

2012-01-01

Traditional guidelines on rock protection at circular piers predominantly focus on preventing shear failure (by choosing a sufficiently large rock size), winnowing failure (by designing an appropriate filter) and edge failure (by selecting a sufficient extent). In particular areas (e.g. in an

Chiral Plasmonic Nanostructures Fabricated by Circularly Polarized Light.

Science.gov (United States)

Saito, Koichiro; Tatsuma, Tetsu

2018-05-09

The chirality of materials results in a wide variety of advanced technologies including image display, data storage, light management including negative refraction, and enantioselective catalysis and sensing. Here, we introduce chirality to plasmonic nanostructures by using circularly polarized light as the sole chiral source for the first time. Gold nanocuboids as precursors on a semiconductor were irradiated with circularly polarized light to localize electric fields at specific corners of the cuboids depending on the handedness of light and deposited dielectric moieties as electron oscillation boosters by the localized electric field. Thus, plasmonic nanostructures with high chirality were developed. The present bottom-up method would allow the large-scale and cost-effective fabrication of chiral materials and further applications to functional materials and devices.

Circular symmetry in topologically massive gravity

International Nuclear Information System (INIS)

Deser, S; Franklin, J

2010-01-01

We re-derive, compactly, a topologically massive gravity (TMG) decoupling theorem: source-free TMG separates into its Einstein and Cotton sectors for spaces with a hypersurface-orthogonal Killing vector, here concretely for circular symmetry. We then generalize the theorem to include matter; surprisingly, the single Killing symmetry also forces conformal invariance, requiring the sources to be null. (note)

Circular symmetry in topologically massive gravity

Energy Technology Data Exchange (ETDEWEB)

Deser, S [Physics Department, Brandeis University, Waltham, MA 02454 (United States); Franklin, J, E-mail: deser@brandeis.ed, E-mail: jfrankli@reed.ed [Reed College, Portland, OR 97202 (United States)

2010-05-21

We re-derive, compactly, a topologically massive gravity (TMG) decoupling theorem: source-free TMG separates into its Einstein and Cotton sectors for spaces with a hypersurface-orthogonal Killing vector, here concretely for circular symmetry. We then generalize the theorem to include matter; surprisingly, the single Killing symmetry also forces conformal invariance, requiring the sources to be null. (note)

Magnetic circular dichroism in electron microscopy

Czech Academy of Sciences Publication Activity Database

Rusz, Ján; Novák, Pavel; Rubino, S.; Hébert, C.; Schattschneider, P.

2008-01-01

Roč. 113, č. 1 (2008), s. 599-604 ISSN 0587-4246. [CSMAG'07. Košice, 09.07.2007-12.07.2007] EU Projects: European Commission(XE) 508971 - CHIRALTEM Institutional research plan: CEZ:AV0Z10100521 Keywords : magnetic circular dichroism * electron microscopy Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.321, year: 2008

24 CFR 700.175 - Other Federal requirements.

Science.gov (United States)

2010-04-01

... requirements described in 24 CFR part 44 (OMB Circular A-128). (b) Conflict of interest. In addition to the conflict of interest requirements in OMB Circular A-87 and 24 CFR part 85, no person who is an employee..., and the implementing regulations at 24 CFR part 108; and (3) Racial and ethnic collection requirements...

Beam induced hydrodynamic tunneling in the future circular collider components

Directory of Open Access Journals (Sweden)

N. A. Tahir

2016-08-01

Full Text Available A future circular collider (FCC has been proposed as a post-Large Hadron Collider accelerator, to explore particle physics in unprecedented energy ranges. The FCC is a circular collider in a tunnel with a circumference of 80–100 km. The FCC study puts an emphasis on proton-proton high-energy and electron-positron high-intensity frontier machines. A proton-electron interaction scenario is also examined. According to the nominal FCC parameters, each of the 50 TeV proton beams will carry an amount of 8.5 GJ energy that is equivalent to the kinetic energy of an Airbus A380 (560 t at a typical speed of 850  km/h. Safety of operation with such extremely energetic beams is an important issue, as off-nominal beam loss can cause serious damage to the accelerator and detector components with a severe impact on the accelerator environment. In order to estimate the consequences of an accident with the full beam accidently deflected into equipment, we have carried out numerical simulations of interaction of a FCC beam with a solid copper target using an energy-deposition code (fluka and a 2D hydrodynamic code (big2 iteratively. These simulations show that, although the penetration length of a single FCC proton and its shower in solid copper is about 1.5 m, the full FCC beam will penetrate up to about 350 m into the target because of the “hydrodynamic tunneling.” These simulations also show that a significant part of the target is converted into high-energy-density matter. We also discuss this interesting aspect of this study.

Radial Internal Material Handling System (RIMS) for Circular Habitat Volumes

Science.gov (United States)

Howe, Alan S.; Haselschwardt, Sally; Bogatko, Alex; Humphrey, Brian; Patel, Amit

2013-01-01

On planetary surfaces, pressurized human habitable volumes will require a means to carry equipment around within the volume of the habitat, regardless of the partial gravity (Earth, Moon, Mars, etc.). On the NASA Habitat Demonstration Unit (HDU), a vertical cylindrical volume, it was determined that a variety of heavy items would need to be carried back and forth from deployed locations to the General Maintenance Work Station (GMWS) when in need of repair, and other equipment may need to be carried inside for repairs, such as rover parts and other external equipment. The vertical cylindrical volume of the HDU lent itself to a circular overhead track and hoist system that allows lifting of heavy objects from anywhere in the habitat to any other point in the habitat interior. In addition, the system is able to hand-off lifted items to other material handling systems through the side hatches, such as through an airlock. The overhead system consists of two concentric circle tracks that have a movable beam between them. The beam has a hoist carriage that can move back and forth on the beam. Therefore, the entire system acts like a bridge crane curved around to meet itself in a circle. The novelty of the system is in its configuration, and how it interfaces with the volume of the HDU habitat. Similar to how a bridge crane allows coverage for an entire rectangular volume, the RIMS system covers a circular volume. The RIMS system is the first generation of what may be applied to future planetary surface vertical cylinder habitats on the Moon or on Mars.

Beam Induced Hydrodynamic Tunneling in the Future Circular Collider Components

Science.gov (United States)

Tahir, N. A.; Burkart, F.; Schmidt, R.; Shutov, A.; Wollmann, D.; Piriz, A. R.

2016-08-01

A future circular collider (FCC) has been proposed as a post-Large Hadron Collider accelerator, to explore particle physics in unprecedented energy ranges. The FCC is a circular collider in a tunnel with a circumference of 80-100 km. The FCC study puts an emphasis on proton-proton high-energy and electron-positron high-intensity frontier machines. A proton-electron interaction scenario is also examined. According to the nominal FCC parameters, each of the 50 TeV proton beams will carry an amount of 8.5 GJ energy that is equivalent to the kinetic energy of an Airbus A380 (560 t) at a typical speed of 850 km /h . Safety of operation with such extremely energetic beams is an important issue, as off-nominal beam loss can cause serious damage to the accelerator and detector components with a severe impact on the accelerator environment. In order to estimate the consequences of an accident with the full beam accidently deflected into equipment, we have carried out numerical simulations of interaction of a FCC beam with a solid copper target using an energy-deposition code (fluka) and a 2D hydrodynamic code (big2) iteratively. These simulations show that, although the penetration length of a single FCC proton and its shower in solid copper is about 1.5 m, the full FCC beam will penetrate up to about 350 m into the target because of the "hydrodynamic tunneling." These simulations also show that a significant part of the target is converted into high-energy-density matter. We also discuss this interesting aspect of this study.

Negative circular polarization as a universal property of quantum dots

International Nuclear Information System (INIS)

Taylor, Matthew W.; Spencer, Peter; Murray, Ray

2015-01-01

This paper shows that negative circular polarization, a spin flip of polarized carriers resulting in emission of opposite helicity, can be observed in undoped, n-doped, and p-doped InAs/GaAs quantum dots. These results contradict the usual interpretation of the effect. We show using power dependent and time resolved spectroscopy that the generation of negative circular polarization correlates with excited state emission. Furthermore, a longer spin lifetime of negatively polarized excitons is observed where emission is largely ground state in character

Evaluation of energy absorption performance of steel square profiles with circular discontinuities

Directory of Open Access Journals (Sweden)

Dariusz Szwedowicz

Full Text Available This article details the experimental and numerical results on the energy absorption performance of square tubular profile with circular discontinuities drilled at lengthwise in the structure. A straight profile pattern was utilized to compare the absorption of energy between the ones with discontinuities under quasi-static loads. The collapse mode and energy absorption conditions were modified by circular holes. The holes were drilled symmetrically in two walls and located in three different positions along of profile length. The results showed a better performance on energy absorption for the circular discontinuities located in middle height. With respect to a profile without holes, a maximum increase of 7% in energy absorption capacity was obtained experimentally. Also, the numerical simulation confirmed that the implementation of circular discontinuities can reduce the peak load (Pmax by 10%. A present analysis has been conducted to compare numerical results obtained by means of the finite element method with the experimental data captured by using the testing machine. Finally the discrete model of the tube with and without geometrical discontinuities presents very good agreements with the experimental results.

INTERNATIONAL UNION OF OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM - ADAMANT CIRCULAR SAW OENHP NUMBER: 2001-05, VERSION A

International Nuclear Information System (INIS)

2002-01-01

Florida International University's (FIU) Hemispheric Center for Environmental Technology (HCET) evaluated five saws for their effectiveness in cutting up specially prepared fiberglass-reinforced plywood crates. These crates were built as surrogates for crates that presently hold radioactive contaminated glove boxes at the Department of Energy's (DOE) Los Alamos facility. The Adamant circular saw was assessed on August 14, 2001. During the FIU test of efficacy, a team from the Operating Engineers National Hazmat Program (OENHP) evaluated the occupational safety and health issues associated with this technology. The Adamant was only used during a limited ''test'' on a regular plywood crate due to safety considerations of the tool for this application. The Adamant circular saw, a counter-rotating twin-cutter, constructed with blades that work differently than conventional cutting wheels with twin blades, each rotating in opposite directions. It is used to cut wood and metals. Each blade is approximately 8 3/4 inches in diameter with a maximum cutting depth of 2 1/2 inches. The machine has two rotation speeds: 1,900 and 2,900 rotations per minute (rpm). The saw is operated with an interlocked, guarded trigger switch located at the end of the saw opposite the cutting blades. To operate the saw, the safety interlock must be depressed prior to powering the saw with the trigger control. The saw is supported by a handle at the front of the saw near the cutting blades. The top part of the blades is guarded near the handle, with approximately three-fourths of the face of the blades exposed. The Adamant circular saw is an innovative technology used to cut metals and wood. Its safety features include: interlocking switch for powering the saw, overload indicator and shutoff, and an electronic brake that stops the engine immediately when the start button is released. The top part of the blades is guarded near the motor. With approximately three-fourths of the face of the blades

Circular arc snakes and kinematic surface generation

KAUST Repository

Barton, Michael; Shi, Ling; Kilian, Martin; Wallner, Johannes; Pottmann, Helmut

2013-01-01

of circular arcs is well suited for such purposes, and allows us to reduce evolution of curves to the evolution of a control point collection in a certain finite-dimensional shape space. We approach this evolution by a 2-step process: linearized evolution via

Parenting on Your Own. Circulars 1245-1258.

Science.gov (United States)

Hughes, Robert, Jr.; And Others

These 14 circulars for single parents provide advice about several aspects of parenting. Contents discuss developing self-esteem, conquering loneliness, managing stress, obtaining social support, managing time, controlling finances, getting and using credit, developing job-readiness skills, searching for a job, disciplining children effectively,…