WorldWideScience

Sample records for seat backs

  1. Effects of Inclined Treadmill Walking on Pelvic Anterior Tilt Angle, Hamstring Muscle Length, and Trunk Muscle Endurance of Seated Workers with Flat-back Syndrome

    OpenAIRE

    Kim, Min-hee; Yoo, Won-gyu

    2014-01-01

    [Purpose] This study investigated the effects of inclined treadmill walking on pelvic anterior tilt angle, hamstring muscle length, and back muscle endurance of seated workers with flat-back syndrome. [Subjects] Eight seated workers with flat-back syndrome who complained of low-back pain in the L3–5 region participated in this study. [Methods] The subjects performed a walking exercise on a 30° inclined treadmill. We measured the pelvic anterior tilt angle, hamstring muscle length, and back mu...

  2. Effects of Inclined Treadmill Walking on Pelvic Anterior Tilt Angle, Hamstring Muscle Length, and Trunk Muscle Endurance of Seated Workers with Flat-back Syndrome.

    Science.gov (United States)

    Kim, Min-Hee; Yoo, Won-Gyu

    2014-06-01

    [Purpose] This study investigated the effects of inclined treadmill walking on pelvic anterior tilt angle, hamstring muscle length, and back muscle endurance of seated workers with flat-back syndrome. [Subjects] Eight seated workers with flat-back syndrome who complained of low-back pain in the L3-5 region participated in this study. [Methods] The subjects performed a walking exercise on a 30° inclined treadmill. We measured the pelvic anterior tilt angle, hamstring muscle length, and back muscle endurance before and after inclined treadmill walking. [Results] Anterior pelvic tilt angle and active knee extension angle significantly increased after inclined treadmill walking. Trunk extensor and flexor muscle endurance times were also significantly increased compared to the baseline. [Conclusion] Inclined treadmill walking may be an effective approach for the prevention or treatment of low-back pain in flat-back syndrome.

  3. Experimental and numerical study of back-cooling car-seat system using embedded heat pipes to improve passenger’s comfort

    International Nuclear Information System (INIS)

    Hatoum, Omar; Ghaddar, Nesreen; Ghali, Kamel; Ismail, Nagham

    2017-01-01

    Graphical abstract: Heat pipe assembly (a) with the insulation layer (b) without the insulation layer; and (c) thermal manikin test on the heat pipe chair. - Highlights: • A new back cooling system for a car seat using embedded heat pipes was modeled numerically. • The heat-pipe seat model was experimentally validated using heated thermal manikin. • An integrated heat pipe model and bio-heat model was used to predict local thermal comfort. • The heat pipe system reduced the back skin temperature by 1 °C compared to seat without heat pipes. • The heat pipe system increased the overall thermal comfort of the passenger by 30%. - Abstract: This work develops a back-cooling system for a car seat using seat embedded heat pipes to improve passenger comfort. The heat pipe system utilizes the temperature difference between the passenger back and the car cabin air to remove heat from the human body and enhance the comfort state. The developed seat heat-pipe model was validated experimentally using a thermal manikin with controlled constant skin temperature mode in a climatic chamber. Good agreement was found between the measured and the numerically predicted values of base panel temperature. By integrating the validated heat pipe with a bio-heat model, the back segmental skin temperature as well as the overall thermal comfort was predicted and compared with the conventional seat case without the heat pipe system. The heat pipes were able to reduce the skin temperature by 1 °C and to increase the overall thermal comfort of the body by 30%. In addition, a parametric study was performed to determine the optimal number of heat pipes that ensure the thermal comfort of the passenger.

  4. Odorous house ants (Tapinoma sessile as back-seat drivers of localized ant decline in urban habitats.

    Directory of Open Access Journals (Sweden)

    Adam Salyer

    "back-seat driver" role and affects pest management strategies. As demonstrated by T. sessile, this article concludes native species can become back-seat drivers of biodiversity loss and potentially thrive as "metro-invasive" species.

  5. Taking a back seat

    DEFF Research Database (Denmark)

    Egerod, Ingrid; Overgaard, Dorthe

    2012-01-01

    As more patients with cardiac failure are being bridged to transplantation with left ventricular assist devices (LVAD), more insight into the lives of their close relatives is needed.......As more patients with cardiac failure are being bridged to transplantation with left ventricular assist devices (LVAD), more insight into the lives of their close relatives is needed....

  6. Pregnancy: Should I Use a Seat Belt?

    Science.gov (United States)

    ... passenger has not been shown to affect the safety of an unborn baby in a crash. Injuries from car crashes tend to be less serious in people who are sitting in the back seat. If you are not driving, you may want to sit in the back seat. It is still important to wear a seat belt, no matter where ...

  7. Shoulder muscular activity in individuals with low back pain and spinal cord injury during seated manual load transfer tasks.

    Science.gov (United States)

    Dickerson, Clark R; Alenabi, Talia; Martin, Bernard J; Chaffin, Don B

    2018-03-08

    This study aimed to compare the activity of four shoulder muscles in individuals with low back pain (LBP), spinal cord injuries (SCI) and a control group, during one-handed load transfer trials. Nine individuals with minimum one-year of LBP, eleven with thoracic/lumbar SCI and nine healthy controls participated in this study. The activations of anterior deltoid, upper trapezius, infraspinatus and pectoralis major were recorded by surface EMG during one-handed transferring of a cylinder from a home shelve to six spatially distributed target shelves. The integrated EMG values were compared using repeated measure ANOVA. Both LBPs and SCIs had higher anterior deltoid activation and LBPs required more upper trapezius activation than controls (p demands for these two muscles. The anterior deltoid and upper trapezius in LBP and SCI individuals are under higher demand during occupational load transfer tasks. Practitioner Summary: This study aimed to compare the activation of four shoulder muscles in individuals with low back pain, spinal cord injuries and healthy condition. EMG analysis showed that the injured groups required more upper trapezius and anterior deltoid activation during load transfer tasks, which may predispose them to muscle overexertion.

  8. Car Seat Safety

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Car Seat Safety KidsHealth / For Parents / Car Seat Safety ... certified child passenger safety technician.) Guidelines for Choosing Car Seats Choose a seat with a label that ...

  9. Seat belt reminders.

    NARCIS (Netherlands)

    2008-01-01

    Seat belts are an effective way of reducing the number or road deaths and severe road injuries in crashes. Seat belt reminders warn car drivers and passengers if the seat belt is not fastened. This can be done by a visual signal or an acoustic signal or by a combination of the two. Seat belt

  10. Active Suspension of Truck Seat

    Directory of Open Access Journals (Sweden)

    Masaaki Kawana

    1998-01-01

    Full Text Available The driver’s seat of a heavy duty truck is usually mounted on a spring–damper assembly anchored to the cab floor. To improve riding comfort, this study investigated the effects of mounting a computer-controlled actuator in parallel with the traditional spring–damper assembly. A dynamic model of the seat is represented by a two degree-of-freedom system, including a cushion. In this paper, a control system is designed, using optimal control theory, which minimizes rms vertical acceleration at a point representing the driver’s hip point. In this system, accelerations of the hip point, the seat frame and the cab floor are picked up and integrated to obtain the state variables to be fed back and fed forward to the actuator through a digital computer. The actuator is constructed with electric servo-motor and ball-screw mechanism. The experimental study was carried out on a shaker, which simulates the vibrations of the cab floor in actual service. Results were obtained for both a dummy and a real human body. The vibration test produced rms accelerations of the seat and the hip point of about 1.0 m/s2 without the actuator, while the rms accelerations were suppressed to about 0.5 m/s2 at a rms input voltage to the servo-motor of 1.0 V.

  11. Determining the reliability of a custom built seated stadiometry set-up for measuring spinal height in participants with chronic low back pain.

    Science.gov (United States)

    Steele, James; Bruce-Low, Stewart; Smith, Dave; Jessop, David; Osborne, Neil

    2016-03-01

    Indirect measurement of disc hydration can be obtained through measures of spinal height using stadiometry. However, specialised stadiometers for this are often custom-built and expensive. Generic wall-mounted stadiometers alternatively are common in clinics and laboratories. This study examined the reliability of a custom set-up utilising a wall-mounted stadiometer for measurement of spinal height using custom built wall mounted postural rods. Twelve participants with non-specific chronic low back pain (CLBP; females n = 5, males n = 7) underwent measurement of spinal height on three separate consecutive days at the same time of day where 10 measurements were taken at 20 s intervals. Comparisons were made using repeated measures analysis of variance for 'trial' and 'gender'. There were no significant effects by trial or interaction effects of trial x gender. Intra-individual absolute standard error of measurement (SEM) was calculated for spinal height using the first of the 10 measures, the average of 10 measures, the total shrinkage, and the rate of shrinkage across the 10 measures examined as the slope of the curve when a linear regression was fitted. SEMs were 3.1 mm, 2.8 mm, 2.6 mm and 0.212, respectively. Absence of significant differences between trials and the reported SEMs suggests this custom set-up for measuring spinal height changes is suitable use as an outcome measure in either research or clinical practice in participants with CLBP. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  12. Blast resistant vehicle seat

    Science.gov (United States)

    Ripley, Edward B

    2013-02-12

    Disclosed are various seats for vehicles particularly military vehicles that are susceptible to attack by road-bed explosive devices such as land mines or improvised explosive devices. The seats often have rigid seat shells and may include rigid bracing for rigidly securing the seat to the chassis of the vehicle. Typically embodiments include channels and particulate media such as sand disposed in the channels. A gas distribution system is generally employed to pump a gas through the channels and in some embodiments the gas is provided at a pressure sufficient to fluidize the particulate media when an occupant is sitting on the seat.

  13. The Impact of Seating Location and Seating Type on Student Performance

    OpenAIRE

    Meeks, Michael; Knotts, Tami; James, Karen; Williams, Felice; Vassar, John; Wren, Amy

    2013-01-01

    While an extensive body of research exists regarding the delivery of course knowledge and material, much less attention has been paid to the performance effect of seating position within a classroom. Research findings are mixed as to whether students in the front row of a classroom outperform students in the back row. Another issue that has not been fully examined in higher education is the effect of environmental factors, specifically seating type, on student performance. This study examines...

  14. Putting Opportunism in the Back Seat

    DEFF Research Database (Denmark)

    Foss, Nicolai; Weber, Libby

    2013-01-01

    TCE and its applications in management research put more emphasis on opportunism than on bounded rationality. By augmenting the bounded rationality assumption to include interpretive limitations, we show that there are sources of costly conflict that are not rooted in opportunism. Moreover, we show...

  15. Putting Opportunism in the Back Seat

    DEFF Research Database (Denmark)

    Foss, Nicolai; Weber, Libby

    2013-01-01

    TCE and its applications in management research put more emphasis on opportunism than on bounded rationality. By augmenting the bounded rationality assumption to include interpretive limitations, we show that there are sources of costly conflict that are not rooted in opportunism. Moreover, we show...... that bounded rationality may drive opportunism. All hierarchal forms are inherently subject to specific bounded-rationality-based conflicts, thus have different capacities to mitigate bounded-rationality-based transaction costs....

  16. Drivers' attitudes toward front or rear child passenger belt use and seat belt reminders at these seating positions.

    Science.gov (United States)

    Kidd, David G; McCartt, Anne T

    2014-01-01

    Passengers, especially those in rear seating positions, use seat belts less frequently than drivers. In-vehicle technology can inform drivers when their passengers are unbuckled and encourage passengers to use belts. The current study collected information about drivers' attitudes toward passenger belt use and belt reminders for front passengers and children in back seats. A national telephone survey of 1218 people 18 and older was conducted, of which 477 respondents were drivers who transport a front seat passenger at least once a week and 254 were drivers who transport an 8- to 15-year-old child in the back seat. Respondents were asked about their attitudes toward belt use by their front passengers or rear child passengers and preferences for different passenger belt reminder features. Ninety percent of drivers who regularly transport front seat passengers said that the passengers always use seat belts. Reported belt use was even higher among 8- to 15-year-old children in the back seat (97%). Among the drivers whose children do not always buckle up, about half said their child unbuckled the belt during the trip. Almost every full-time belt use driver (96%) would encourage front passengers to buckle up if not belted, compared to 57 percent of part-time belt users and nonusers. In contrast, nearly every driver who transports children in the back seat would encourage their belt use, regardless of the driver's belt use habits. Most drivers who transport front passengers wanted passenger belt reminders to encourage passengers to buckle up. Most of these drivers wanted a chime/buzzer or warning light or text display and wanted the reminder to last indefinitely. Most drivers who transport child passengers in the rear seat wanted the vehicle to indicate whether child passengers are unbuckled. A large majority of these drivers wanted notifications via a visual diagram of seating positions and belt use, a chime/buzzer, and a warning light or text display. These drivers

  17. Support force measures of midsized men in seated positions.

    Science.gov (United States)

    Bush, Tamara Reid; Hubbard, Robert P

    2007-02-01

    Two areas not well researched in the field of seating mechanics are the distribution of normal and shear forces, and how those forces change with seat position. The availability of these data would be beneficial for the design and development of office, automotive and medical seats. To increase our knowledge in the area of seating mechanics, this study sought to measure the normal and shear loads applied to segmental supports in 12 seated positions, utilizing three inclination angles and four levels of seat back articulation that were associated with automotive driving positions. Force data from six regions, including the thorax, sacral region, buttocks, thighs, feet, and hand support were gathered using multi-axis load cells. The sample contained 23 midsized subjects with an average weight of 76.7 kg and a standard deviation of 4.2 kg, and an average height of 1745 mm with a standard deviation of 19 mm. Results were examined in terms of seat back inclination and in terms of torso articulation for relationships between seat positions and support forces. Using a repeated measures analysis, significant differences (p<0.05) were identified for normal forces relative to all inclination angles except for forces occurring at the hand support. Other significant differences were observed between normal forces behind the buttocks, pelvis, and feet for torso articulations. Significant differences in the shear forces occurred under the buttocks and posterior pelvis during changes in seat back inclination. Significant differences in shear forces were also identified for torso articulations. These data suggest that as seat back inclination or torso articulation change, significant shifts in force distribution occur.

  18. The Impact of Seating Location and Seating Type on Student Performance

    Science.gov (United States)

    Meeks, Michael D.; Knotts, Tami L.; James, Karen D.; Williams, Felice; Vassar, John A.; Wren, Amy Oakes

    2013-01-01

    While an extensive body of research exists regarding the delivery of course knowledge and material, much less attention has been paid to the performance effect of seating position within a classroom. Research findings are mixed as to whether students in the front row of a classroom outperform students in the back row. Another issue that has not…

  19. Fire-resistant materials for aircraft passenger seat construction

    Science.gov (United States)

    Fewell, L. L.; Tesoro, G. C.; Moussa, A.; Kourtides, D. A.

    1979-01-01

    The thermal response characteristics of fabric and fabric-foam assemblies are described. The various aspects of the ignition behavior of contemporary aircraft passenger seat upholstery fabric materials relative to fabric materials made from thermally stable polymers are evaluated. The role of the polymeric foam backing on the thermal response of the fabric-foam assembly is also ascertained. The optimum utilization of improved fire-resistant fabric and foam materials in the construction of aircraft passenger seats is suggested.

  20. International survey of seat belt use exemptions.

    Science.gov (United States)

    Weiss, H; Sirin, H; Levine, J A; Sauber, E

    2006-08-01

    Substantial evidence of seatbelt efficacy has been shown by several studies, and it is widely recommended that motor vehicle occupants use properly fitted seat belts. However, some (but a heretofore unknown number of) countries with national seat belt laws permit various exemptions which may lower use rates. The aim of this study was to survey the variety of exemptions to national seat belt laws. This investigation relied on identifying respondents from national traffic safety agencies, other governmental and non-governmental organizations, Internet searches, personal contacts, and other sources. Questionnaires were deployed through a web based survey supplemented by email and postal versions. Responses were received from 30 countries of which 28 (93.7%) had a national seat belt law. About two thirds (63.7%) of the 28 national laws applied to both front and back seat passengers. The leading exemption types included vehicles made before a certain year (n = 13), antique vehicles (n = 12), military vehicles (n = 11), buses (n = 9), and emergency vehicles (n = 8). Most responding countries reported one or more specific categories of individuals as exempt including those with medical exemptions (n = 20), taxi drivers (n = 11), police (n = 9), emergency medical personnel (n = 8), physically disabled people (n = 6), and pregnant women (n = 6). Out of 26 responses to the question regarding current level of enforcement, 42.3% felt enforcement was "very good or good" and 57.7% characterized it as "fair or poor". This study represents one of the largest international traffic law surveys reported. Most national seatbelt laws offer perilous exemptions to a broad array of vehicle types and road user groups. These findings, coupled with concern over the level of enforcement in the majority of countries surveyed, suggest that international road safety efforts have a long way to go to improve coverage and enforcement of national seat belt laws.

  1. Fire resistant aircraft seat program

    Science.gov (United States)

    Fewell, L. A.

    1979-01-01

    Foams, textiles, and thermoformable plastics were tested to determine which materials were fire retardant, and safe for aircraft passenger seats. Seat components investigated were the decorative fabric cover, slip covers, fire blocking layer, cushion reinforcement, and the cushioning layer.

  2. Misuse of car safety seats.

    Science.gov (United States)

    Bull, M J; Stroup, K B; Gerhart, S

    1988-01-01

    Correct use of car seats for small children is essential to prevent serious injuries and death from automotive accidents. Failure to use a car seat properly can contribute to serious injury or death of a child. A case study in which misuse of a car seat occurred is reported. The infant died of hemorrhage and shock secondary to liver laceration which resulted from excessive pressure over the abdomen sustained on impact. Surveys of car seat use for small children prior to and following a child restraint law are also reported. Observers noted types of car seats and specific forms of misuse. Survey results suggest that parents are more likely to misuse car seats for infants than toddlers. Medical professionals can reinforce the importance of proper car seat use by incorporating specific car seat use questions into the patient interview and by providing educational materials.

  3. İngilizce Öğrencilerinin Arka Koltuk TV Sistemleri ve Altyazılı Filmlere olan Tutumları English Language Learners’ Attitudes to Back-seat TV Systems and Subtitled Movies

    Directory of Open Access Journals (Sweden)

    Buğra ZENGİN

    2013-09-01

    Full Text Available Given the limited exposure to the target language typical ofEnglish as a foreign language setting, English language movies or seriesare needed as sources of authentic input, especially concerning chunks.However, numerous factors may get in the way of their utilization insideand outside the classroom. Even though all classrooms are transformedinto technologically advanced, media enhanced learning environments;other constraints (especially time limits make it necessary to seek outways of benefiting from movies in informal settings. Nevertheless, evenpresuming their availability is within the budget of people of everysocio-economic background, the company they keep in this social andfun activity may induce a shift to the version dubbed into the learner’snative language. Likelihood of such interference is not low at all.Focusing on a university context with high-frequency intercitystudent commuting, this study tries to tackle the attitudes of thecommuter students to back-seat TV systems and subtitled movies.Using a five-point Likert-scale to assess the attitudes of Englishpreparation students, the questionnaire findings indicated that such aservice would be welcome once initiated. It is hoped that this study mayinduce the government, educational institutions, broadcasting andtravel companies to collaborate for a solution. İngilizcenin yabancı dil olarak öğretildiği konumlarda genel olarak görülen bir durum olan hedef dil girdisinin çok sınırlı olması gerçeği düşündüğünde, İngilizce film ya da dizilerine, özellikle dil kalıpları bakımından, doğal girdi kaynakları olarak ihtiyaç duyulmaktadır. Ancak öğrencilerin bu kaynaklardan faydalanmalarına engel teşkil eden, sınıf içi ve sınıf dışı birçok etken vardır. Bütün sınıflar gelişmiş teknolojilere sahip multi-medyalı öğrenme ortamlarına dönüştürülse dahi, diğer kısıtlamalar (özellikle zaman sınırlılıkları, İngilizce öğrenimi i

  4. The Surprising Impact of Seat Location on Student Performance

    Science.gov (United States)

    Perkins, Katherine K.; Wieman, Carl E.

    2005-01-01

    Every physics instructor knows that the most engaged and successful students tend to sit at the front of the class and the weakest students tend to sit at the back. However, it is normally assumed that this is merely an indication of the respective seat location preferences of weaker and stronger students. Here we present evidence suggesting that in fact this may be mixing up the cause and effect. It may be that the seat selection itself contributes to whether the student does well or poorly, rather than the other way around. While a number of studies have looked at the effect of seat location on students, the results are often inconclusive, and few, if any, have studied the effects in college classrooms with randomly assigned seats. In this paper, we report on our observations of a large introductory physics course in which we randomly assigned students to particular seat locations at the beginning of the semester. Seat location during the first half of the semester had a noticeable impact on student success in the course, particularly in the top and bottom parts of the grade distribution. Students sitting in the back of the room for the first half of the term were nearly six times as likely to receive an F as students who started in the front of the room. A corresponding but less dramatic reversal was evident in the fractions of students receiving As. These effects were in spite of many unusual efforts to engage students at the back of the class and a front-to-back reversal of seat location halfway through the term. These results suggest there may be inherent detrimental effects of large physics lecture halls that need to be further explored.

  5. Development of adaptive helicopter seat systems for aircrew vibration mitigation

    Science.gov (United States)

    Chen, Yong; Wickramasinghe, Viresh; Zimcik, David G.

    2008-03-01

    Helicopter aircrews are exposed to high levels of whole body vibration during flight. This paper presents the results of an investigation of adaptive seat mount approaches to reduce helicopter aircrew whole body vibration levels. A flight test was conducted on a four-blade helicopter and showed that the currently used passive seat systems were not able to provide satisfactory protection to the helicopter aircrew in both front-back and vertical directions. Long-term exposure to the measured whole body vibration environment may cause occupational health issues such as spine and neck strain injuries for aircrew. In order to address this issue, a novel adaptive seat mount concept was developed to mitigate the vibration levels transmitted to the aircrew body. For proof-of-concept demonstration, a miniature modal shaker was properly aligned between the cabin floor and the seat frame to provide adaptive actuation authority. Adaptive control laws were developed to reduce the vibration transmitted to the aircrew body, especially the helmet location in order to minimize neck and spine injuries. Closed-loop control test have been conducted on a full-scale helicopter seat with a mannequin configuration and a large mechanical shaker was used to provide representative helicopter vibration profiles to the seat frame. Significant vibration reductions to the vertical and front-back vibration modes have been achieved simultaneously, which verified the technical readiness of the adaptive mount approach for full-scale flight test on the vehicle.

  6. Fire resistant aircraft seat materials

    Science.gov (United States)

    Trabold, E. L.

    1978-01-01

    The establishment of a technical data base for individual seat materials in order to facilitate materials selections is reviewed. The thermal response of multi-layer constructions representative of the basic functional layers of a typical future seat is examined. These functional layers include: (1) decorative fabric cover; (2) slip sheet (topper); (3) fire blocking layer; (4) cushion reinforcement; and (5) cushioning layer. The implications for material selection for full-scale seats are discussed.

  7. Seat and seatbelt accommodation in fire apparatus: Anthropometric aspects.

    Science.gov (United States)

    Hsiao, Hongwei; Whitestone, Jennifer; Wilbur, Michael; Lackore, J Roger; Routley, J Gordon

    2015-11-01

    This study developed anthropometric information on U.S. firefighters to guide fire-apparatus seat and seatbelt designs and future standards development. A stratified sample of 863 male and 88 female firefighters across the U.S. participated in the study. The study results suggested 498 mm in width, 404 mm in depth, and 365-476 mm in height for seat pans; 429-522 mm in width and 542 mm in height for seat back; 871 mm in height for head support; a seat space of 733 mm at shoulder and 678 mm at hip; and a knee/leg clearance of 909 mm in fire truck cab. Also, 1520 mm of lap belt web effective length and 2828 mm of lap-and-shoulder belt web effective length were suggested. These data for fire-truck seats and seatbelts provide a foundation for fire apparatus manufacturers and standards committees to improve firefighter seat designs and seatbelt usage compliance. Published by Elsevier Ltd.

  8. AAP Updates Recommendations on Car Seats

    Science.gov (United States)

    ... Size Email Print Share AAP Updates Recommendations on Car Seats Page Content Article Body Children should ride ... of approved car safety seats. Healthy Children Radio: Car Seat Safety Dennis Durbin, MD, FAAP, lead author ...

  9. Comparative study of potential whiplash injuries for different occupant seated positions during rear end accidents.

    Science.gov (United States)

    Omerović, Senad; Tomasch, Ernst; Gutsche, Andreas J; Prebil, Ivan

    2016-01-01

    Whiplash injuries to the cervical spine represent a considerable economic burden on society with medical conditions, in some cases persisting for more than a year. Numerous studies of whiplash injuries have been made for occupant normal seated position, leaving the analysis of neck injuries for out-of-normal positions not well documented. For that purpose, a detailed human cervical spine finite element model was developed. The analysis was made for four most common occupant seated positions, such as: Normal Position with the torso against the seat back and the head looking straight ahead, Torso Lean forward position with the torso away from the seat back for approximately 10°, Head Flexed position with the head flexed forward approximately 20° from the normal position and Head-Flexed with Torso Lean forward position with the head flexed forward approximately 20° and torso 10° from the normal position. The comparative study included the analysis of capsular ligament deformation and the level of S-curvature of the cervical spine. The model developed predicted that Head Flexed seated position and Head-Flexed with Torso Lean forward seated position are most threatening for upper and lower cervical spine capsular ligament, respectively. As for the level of S-curvature, the model predicted that Head-Flexed with Torso Lean forward seated position would be most prone to neck injuries associated with it. This study demonstrated that the occupant seated position has a significant influence on potential whiplash injuries.

  10. Take your seats: Leftward asymmetry in classroom seating choice

    Directory of Open Access Journals (Sweden)

    Victoria Lynn Harms

    2015-08-01

    Full Text Available Despite an overall body symmetry, human behaviour is full of examples of asymmetry, from writing or gesturing to kissing and cradling. Prior research has revealed that theatre patrons show a bias towards sitting on the right side of a movie theatre. Two competing theories have attempted to explain this seating asymmetry: one posits that expectation of processing demand drives the bias; the other posits that basic motor asymmetries drive the bias. To test these theories we assessed the real-world classroom seating choices of university students using photographs. A bias for students to choose seats on the left side of the classroom was observed, in contrast to the right side bias observed in theatre seating studies. These results provide evidence in support of a processing-expectation bias.

  11. A new landing impact attenuation seat in manned spacecraft biologically-inspired by felids

    Directory of Open Access Journals (Sweden)

    Yu Hui

    2015-04-01

    Full Text Available When manned spacecraft comes back to the earth, it relies on the impact attenuation seat to protect astronauts from injuries during landing phase. Hence, the seat needs to transfer impact load, as small as possible, to the crew. However, there is little room left for traditional seat to improve further. Herein, a new seat system biologically-inspired by felids’ landing is proposed. Firstly, a series of experiments was carried out on cats and tigers, in which they were trained to jump down voluntarily from different heights. Based on the ground reaction forces combined with kinematics, the experiment indicated that felids’ landing after self-initial jump was a multi-step impact attenuation process and the new seat was inspired by this. Then the construction and work process of new seat were redesigned to realize the multi-step impact attenuation. The dynamic response of traditional and new seat is analyzed under the identical conditions and the results show that the new concept seat can significantly weaken the occupant overload in two directions compared with that of traditional seat. As a consequence, the risk of injury evaluated for spinal and head is also lowered, meaning a higher level of protection which is especially beneficial to the debilitated astronaut.

  12. The effect of shaped wheelchair cushion and lumbar supports on under-seat pressure, comfort, and pelvic rotation.

    Science.gov (United States)

    Samuelsson, Kersti; Björk, Maarit; Erdugan, Ann-Marie; Hansson, Anna-Karin; Rustner, Birgitta

    2009-09-01

    A wheelchair seat and position help clients perform daily activities. The comfort of the wheelchair can encourage clients to participate in daily activities and can help prevent future complications. This study evaluates how a shaped seat-cushion and two different back supports affect under-seat pressure, comfort, and pelvic rotation. Thirty healthy subjects were tested using two differently equipped manual wheelchairs. One wheelchair had a Velcro adjustable back seat and a plane seat-cushion. The other wheelchair had a non-adjustable sling-back seat and a plane cushion. The second wheelchair was also equipped with a shaped cushion and/or a detachable lumbar support. Under-seat pressure, estimated comfort, and pelvic rotation were measured after 10 min in each wheelchair outfit. Peak pressure increased with the shaped cushion compared to the plane cushion. No significant difference in estimated comfort was found. Pelvic posterior-rotation was reduced with the adjustable or detachable back-support irrespective of the shape of the seat cushion. To support a neutral pelvic position and spinal curvature, a combination of a shaped cushion and a marked lumbar support is most effective.

  13. Effect of a Dynamic Seating Surface on Postural Control and Function in Children with Cerebral Palsy

    DEFF Research Database (Denmark)

    Meyer, Erna Rosenlund; Trew, Lisa

    Purpose: The purpose was to investigate if a seating system involving a dynamic material covering the seat back and base improves postural control, alignment and function in children with cerebral palsy and to investigate consequences of adapting The Seated Postural Control Measure to a target...... group with multifunctional disabilities. Relevance: Developing sitting systems for disabled persons is of great importance to avoid sitting problems, to increase the level of functioning and postural control which will have an impact on their daily living and activities. This project takes its starting...... Ethical Committee. Outcome measures were Seated Postural Control Measure (SPCM), which was modified to meet the children’s needs, was used to measure alignment and function. Force Sensitive Applications (FSA) on the seat surfaces was used to measure postural movements and interface pressure. All tests...

  14. Multiculturalism on the Back Seat? Culture, Religion, and Justice

    Directory of Open Access Journals (Sweden)

    Jocelyn Maclure

    2015-06-01

    Full Text Available Alan Patten’s Equal Recognition is a major contribution to the normative literature on minority rights. I nonetheless suggest that liberal culturalism as a normative theory, even in Patten’s sophisticated version, is ill suited to deal with the challenges related to the status of religion in the public sphere that are so prevalent in contemporary democracies. In addition, I submit that Patten did not supply a fully convincing answer to the argument that liberal egalitarianism, well understood, is capacious enough to secure fair terms of social cooperation for members of cultural minorities, making the (allegedly burdensome language of “cultural rights” and “cultural recognition” superfluous.

  15. NASA Standards Inform Comfortable Car Seats

    Science.gov (United States)

    2014-01-01

    NASA developed standards, which included the neutral body posture (NBP), to specify ways to design flight systems that support human health and safety. Nissan Motor Company, with US offices in Franklin, Tennessee, turned to NASA's NBP research for the development of a new driver's seat. The 2013 Altima now features the new seat, and the company plans to incorporate the seats in upcoming vehicles.

  16. Development of a Methodology to Gather Seated Anthropometry in a Microgravity Environment

    Science.gov (United States)

    Rajulu, Sudhakar; Young, Karen; Mesloh, Miranda

    2009-01-01

    restraint to eliminate any gap between the subject s gluteal surface and the seat pan and b) to document any necessary design and procedural changes needed due to the microgravity environment. The methodology and setup used during the simulated microgravity evaluations was replicable to the proposed methodology and setup for in-space missions. A flight-like Shuttle seat, pressure sensors, anthropometer, and existing hardware was used to measure seated height and contact area while experiencing microgravity. The outlying buttock and thigh surface contact areas were collected to determine if the subjects were in contact with the seat pan, while a measurer recorded their seated height with an anthropometer. The Anthropometry and Biomechanics Facility (ABF) completed data collection from three microgravity flights to assess the restraint methods and techniques to be used for the in-flight procedures performed by the crewmembers in orbit. The first flight demonstrated that the restraint system on the seat, used in a nominal configuration, did not sufficiently restrain a person in the seat. The results showed the subjects were not in full contact with the seat pan, resulting in inaccurate sitting height data. Thus, a second flight was conducted to test different restraint system options. The results showed that by 1) changing the restraint system from the nominal 3-points of the 5-point harness, which is used for crewmembers when fully suited with emergency equipment, and 2) rerouting the lap straps around the joint of the backrest, where the backrest and seat pan are joined, resulted in the optimal method to restrain a subject. This rerouting method allowed for the anchor location to change and pull the subjects back into the seat instead of being anchored at the side of the subjects thighs. The results from the third flight validated the final restraint system, which resulted in a verified methodology for collecting seated anthropometry to ultimately determine the amount of

  17. Reduced energy and volume air pump for a seat cushion

    Energy Technology Data Exchange (ETDEWEB)

    Vaughn, M.R.; Constantineau, E.J.; Groves, G.E.

    1997-08-19

    An efficient pump system is described for transferring air between sets of bladders in a cushion. The pump system utilizes a reversible piston within a cylinder in conjunction with an equalizing valve in the piston which opens when the piston reaches the end of travel in one direction. The weight of a seated user then forces air back across the piston from an inflated bladder to the previously deflated bladder until the pressure is equalized. In this fashion the work done by the pump is cut in half. The inflation and deflation of the different bladders is controlled to vary the pressure on the several pressure points of a seated user. A principal application is for wheel chair use to prevent pressure ulcers. 12 figs.

  18. Reduced energy and volume air pump for a seat cushion

    Energy Technology Data Exchange (ETDEWEB)

    Vaughn, Mark R. (Albuquerque, NM); Constantineau, Edward J. (Albuquerque, NM); Groves, Gordon E. (Tijeras, NM)

    1997-01-01

    An efficient pump system for transferring air between sets of bladders in a cushion. The pump system utilizes a reversible piston within a cylinder in conjunction with an equalizing valve in the piston which opens when the piston reaches the end of travel in one direction. The weight of a seated user then forces air back across the piston from an inflated bladder to the previously deflated bladder until the pressure is equalized. In this fashion the work done by the pump is cut in half. The inflation and deflation of the different bladders is controlled to vary the pressure on the several pressure points of a seated user. A principal application is for wheel chair use to prevent pressure ulcers.

  19. Applications of Mechatronics in Seating Furniture

    Directory of Open Access Journals (Sweden)

    Hynek Maňák

    2014-01-01

    Full Text Available Mechatronics is gradually being used in different fields of the production process and final products. In the field of home seating furniture, it has not been formally declared as such yet. The purpose of further development of seating furniture is to improve its ergonomic parameters, to improve user comfort in controlling and using seating furniture or to provide new additional functions of seating furniture. Application of mechatronic principles can be presumed within the framework of this development. An analysis of the current state of reclining seating furniture, which uses mechanical and electromechanical positioning mechanisms, is conducted in order to formulate possible fields of applying mechatronics. The analysis defines individual ergonomic parameters which are influenced in reclining of seating furniture. This analysis is used as a basis for formulating a hypothesis describing potential development fields of applying mechatronics in home seating furniture.

  20. Ergonomic Evaluation of Space Shuttle Light-Weight Seat Lever Position and Operation

    Science.gov (United States)

    Maida, J.; Rajulu, Sudhakar L.; Bond, Robert L. (Technical Monitor)

    2000-01-01

    During a Shuttle flight in the early part of 1999, one of the crewmembers was unable to operate the backrest lever for the light-weight seat in microgravity. It is essential that the crewmembers are able to adjust this back-rest lever, which is titled forward 2 degrees from vertical during launch and then moved backwards to 10 degrees aft of vertical upon reaching orbit. This adjustment is needed to cushion the crewmembers during an inadvertent crash landing situation. The original Shuttle seats, which had seat controls located on the front left and right sides of the seat, were replaced recently with the new light-weight seats. The controls for these new, seats were moved to the night side with one control at the front and the other at the back. While it was uncertain whether the problem encountered was unique to that crewmember or not it was clear to the personnel responsible for maintaining the Shuttle seats that not knowing the cause of the problem posed a safety concern for NASA. Hence the Anthropometry and Biomechanics Facility (ABF) of the Johnson Space Center was requested to perform an evaluation of the seat controls and provide NASA with appropriate recommendations on whether the seat lever positions and operations should be modified. The ABF designed an experiment to investigate the amount of pull force exerted by subjects, wearing an unpressurized or pressurized crew launch escape suit, when controls were placed in the front and back (on the right side) of the light-weight seat. Single-axis load cells were attached to the seat levers, which measured the maximum static pull forces that were exerted by the subjects. Twelve subjects, six male and six female, participated in this study. Each subject was asked to perform the pull test at least three times for each combination of lever position and suit pressure conditions. The results from this study showed that as a whole (or in general), the subjects were able to pull on the lever at the back position with

  1. Whole-body Vibration Exposure Intervention among Professional Bus and Truck Drivers: A Laboratory Evaluation of Seat-suspension Designs.

    Science.gov (United States)

    Blood, Ryan P; Yost, Michael G; Camp, Janice E; Ching, Randal P

    2015-01-01

    Long-term exposure to seated whole-body vibration (WBV) is one of the leading risk factors for the development of low back disorders. Professional bus and truck drivers are regularly exposed to continuous WBV, since they spend the majority of their working hours driving heavy vehicles. This study measured WBV exposures among professional bus and truck drivers and evaluated the effects of seat-suspension designs using simulated field-collected data on a vibration table. WBV exposures were measured and compared across three different seat designs: an air-ride bus seat, an air-ride truck seat, and an electromagnetically active (EM-active) seat. Air-ride seats use a compressed-air bladder to attenuate vibrations, and they have been in operation throughout the transportation industry for many years. The EM-active seat is a relatively new design that incorporates a microprocessor-controlled actuator to dampen vibration. The vibration table simulated seven WBV exposure scenarios: four segments of vertical vibration and three scenarios that used field-collected driving data on different road surfaces-a city street, a freeway, and a section of rough roadway. The field scenarios used tri-axial WBV data that had been collected at the seat pan and at the driver's sternum, in accordance with ISO 2631-1 and 2631-5. This study found that WBV was significantly greater in the vertical direction (z-axis) than in the lateral directions (x-and y-axes) for each of the three road types and each of the three types of seats. Quantitative comparisons of the results showed that the floor-to-seat-pan transmissibility was significantly lower for the EM-active seat than for either the air-ride bus seat or the air-ride truck seat, across all three road types. This study also demonstrated that seat-suspension designs have a significant effect on the vibrations transmitted to vehicle operators, and the study's results may prove useful in designing future seat suspensions.

  2. Digital Recovery Sequencer - Advanced Concept Ejection Seats

    National Research Council Canada - National Science Library

    Ross, David A; Cotter, Lee; Culhane, David; Press, Matthew J

    2005-01-01

    .... Continued usage of the Analog Sequencer is undesirable due to limitations with respect to its installed life, electronic component obsolescence, flexibility to accommodate seat safety improvements...

  3. Drive alive: teen seat belt survey program.

    Science.gov (United States)

    Burkett, Katie M; Davidson, Steve; Cotton, Carol; Barlament, James; Loftin, Laurel; Stephens, James; Dunbar, Martin; Butterfield, Ryan

    2010-08-01

    To increase teen seat belt use among drivers at a rural high school by implementing the Drive Alive Pilot Program (DAPP), a theory-driven intervention built on highway safety best practices. The first component of the program was 20 observational teen seat belt surveys conducted by volunteer students in a high school parking lot over a 38-month period before and after the month-long intervention. The survey results were published in the newspaper. The second component was the use of incentives, such as gift cards, to promote teen seat belt use. The third component involved disincentives, such as increased police patrol and school policies. The fourth component was a programmatic intervention that focused on education and media coverage of the DAPP program. Eleven pre-intervention surveys and nine post-intervention surveys were conducted before and after the intervention. The pre- and post-intervention seat belt usage showed significant differences (p<0.0001). The average pre-intervention seat belt usage rate was 51.2%, while the average post-intervention rate was 74.5%. This represents a percentage point increase of 23.3 in seat belt use after the DAPP intervention. Based on seat belt observational surveys, the DAPP was effective in increasing seat belt use among rural high school teenagers. Utilizing a theory-based program that builds on existing best practices can increase the observed seat belt usage among rural high school students.

  4. Ergonomic Analysis of Tricycle Sidecar Seats: Basis for Proposed Standard Design

    Directory of Open Access Journals (Sweden)

    Michael C. Godoy

    2015-12-01

    Full Text Available Ergonomics (also called human factors engineering is the study of human characteristics for the appropriate design of the living and work environment. It is applied in various industrial areas which includes transportation.Tricycle being one of the most common means of public transportation in Lipa City has various adaptations to suit the culture, and environment. The purpose of this study is to analyze the variability in design of the tricycles in Lipa City, Philippines and propose a standard ergonomically designed tricycle sidecar seat for a greater population. The study was conducted at 26 tricycle terminals with 232 tricycle samples within Lipa City proper including the public market area where 400 commuters were given questionnaires to determine the risk factors associated with the existing tricycle sidecar seat design. Anthropometric measurements of 100 males and 100 female commuters were obtained together with the sidecar dimensions of 232 tricycles to substantiate the observed variations in design. Using the design for the average and design for the extremes, it was found out that most of the tricycles in Lipa City, Philippines have inappropriate inclined seat and lowered sidecar seat pan height which can result to leg and abdominal pain; narrowed seat pan depth which caused pressure on buttocks and legs; narrowed backrest width which can cause upper and low back pain; low backrest height that can pose upper back pain; which can also result to abdominal pain; inclined backrest and limited vertical clearance which can cause upper back pain and neck pain. The researcher proposed a sidecar seat design standard which can be used by the Land Transportation Office, and Land Transportation Franchising and Regulatory Board to provide ease, comfort, and convenience to the passengers.

  5. Using haptic feedback to increase seat belt use : traffic tech.

    Science.gov (United States)

    2011-07-01

    The legacy of research on increasing seat belt use has : focused on enactment of seat belt legislation, public education, : high-visibility police enforcement, and seat belt : reminder systems. Several behavioral programs have : produced large, susta...

  6. The dynamic response of human subjects while seated in car seats.

    Science.gov (United States)

    Pope, M H; Magnusson, M; Broman, N H; Hasson, T

    1998-01-01

    A pendulum impact method was used to establish the dynamic response of the seated subject. Threaded K wires were placed in the L3 spinous process. The gain and phase angle between the platform and the vertebra were established. The response of the subject was observed while seated on a platform and a variety of other seats. The seats were found to be very important in the attenuation of the impulse, leading to a higher transmissibility. Clinical Relevance Skeletal impact through the lower extremity is quite common in many occupations. The importance of posture and seat design in attenuation of impulses has been established.

  7. Technical note: Spine loading in automotive seating

    NARCIS (Netherlands)

    Zenk, R.; Franz, M.; Bubb, H.; Vink, P.

    2012-01-01

    For car manufacturers, seat comfort is becoming more important in distinguishing themselves from their competitors. Therefore, many studies on participative seat comfort are carried out. In this paper, an objective assessment approach is reported which evaluates the concept of "optimal load

  8. Seat belt injuries and sigmoid colon trauma.

    OpenAIRE

    Eltahir, E M; Hamilton, D

    1997-01-01

    Colonic seat belt injuries are rare but carry higher mortality rates than small bowel injuries. The case of a 44 year old man is described who had severe sigmoid colon compression injury from his seat belt a few days after a road traffic accident.

  9. Rear-facing car seat (image)

    Science.gov (United States)

    A rear-facing car seat position is recommended for a child who is very young. Extreme injury can occur in an accident because ... child. In a frontal crash a rear-facing car seat is best, because it cradles the head, ...

  10. Environmental and psychosocial factors affecting seat belt use among Turkish front-seat occupants in Ankara: two observation studies.

    Science.gov (United States)

    Simşekoğlu, Ozlem; Lajunen, Timo

    2008-01-01

    Low seat belt use rate among car occupants is one of the main problems contributing to low driver and passenger safety in Turkey, where injury and fatality rates of car occupants are very high in traffic crashes. The present article consists of two observation studies, which were conducted in Ankara. The first study aimed at investigating environmental factors and occupant characteristics affecting seat belt use among front-seat occupants, and the objective of the second study was to investigate the relationship between driver and front-seat passenger seat belt use. In the first study, 4, 227 front-seat occupants (drivers or front seat passengers) were observed on four different road sides and, in the second study 1, 398 front seat occupants were observed in car parks of five different shopping centers in Ankara. In both observations, front-seat occupants' seat bet use (yes, no), sex (male, female), and age ( 50 years) were recorded. The data were analyzed using chi-square statistics and binary logistic regression techniques. Results of the first study showed that seat belt use proportion among observed front seat occupants was very low (25%). Being female and traveling on intercity roads were two main factors positively related to use a seat belt among front-seat occupants. High correlations between seat belt use of the drivers and front-seat passengers were found in the second study. Overall, low seat belt use rate (25%) among the front-seat occupants should be increased urgently for an improved driver and passenger safety in Turkey. Seat belt campaigns especially tailored for male front-seat occupants and for the front-seat occupants traveling on city roads are needed to increase seat belt use rates among them. Also, both drivers and passengers may have an important role in enforcing seat belt use among themselves.

  11. Drive Alive: Teen Seat Belt Survey Program

    Directory of Open Access Journals (Sweden)

    Loftin, Laurel

    2010-08-01

    Full Text Available Objective: To increase teen seat belt use among drivers at a rural high school by implementing the Drive Alive Pilot Program (DAPP, a theory-driven intervention built on highway safety best practices.Methods: The first component of the program was 20 observational teen seat belt surveys conducted by volunteer students in a high school parking lot over a 38-month period before and after the month-long intervention. The survey results were published in the newspaper. The second component was the use of incentives, such as gift cards, to promote teen seat belt use. The third component involved disincentives, such as increased police patrol and school policies. The fourth component was a programmatic intervention that focused on education and media coverage of the DAPP program.Results: Eleven pre-intervention surveys and nine post-intervention surveys were conducted before and after the intervention. The pre- and post-intervention seat belt usage showed significant differences (p<0.0001. The average pre-intervention seat belt usage rate was 51.2%, while the average post-intervention rate was 74.5%. This represents a percentage point increase of 23.3 in seat belt use after the DAPP intervention.Conclusion: Based on seat belt observational surveys, the DAPP was effective in increasing seat belt use among rural high school teenagers. Utilizing a theory-based program that builds on existing best practices can increase the observed seat belt usage among rural high school students. [West J Emerg Med. 2010; 11(3: 280-283.

  12. Development of an Emergency Locking Unit for a Belt-In-Seat (BIS System Using a MEMS Acceleration Sensor

    Directory of Open Access Journals (Sweden)

    Chang Hyun Baek

    2010-04-01

    Full Text Available This paper proposes an emergency locking unit (ELU for a seat belt retractor which is mounted on the back frame of a vehicle seat. The proposed unit uses a recliner sensor based on a MEMS acceleration sensor and solenoid mechanism. The seat has an upper frame supported to tilt on a lower frame. The retractor in belt in seat (BIS system is supported by the upper frame. The proposed recliner sensor based on a MEMS acceleration sensor comprises orientation means for maintaining a predetermined orientation of emergency relative to the lower frame independently of the force of gravity when the upper frame tilts on the lower frame. Experimental results show that the developed recliner sensor unit operates effectively with respect to rollover angles. Thus, the developed unit will have a considerable potential to offer a new design concept in BIS system.

  13. Compatibility of booster seats and vehicles in the U.S. market.

    Science.gov (United States)

    Bing, Julie A; Agnew, Amanda M; Bolte, John H

    2018-05-19

    The objective of this study was to analyze booster and rear vehicle seat dimensions to identify the most frequent compatibility problems. Measurements were collected from 40 high-back and backless boosters and 95 left rear and center rear row seating positions in 50 modern vehicles. Dimensions were compared for 3,800 booster/vehicle seat combinations. For validation and estimation of tolerance and correction factors, 72 booster installations were physically completed and compared with measurement-based compatibility predictions. Dimensions were also compared to the International Organization for Standardization (ISO) volumetric envelopes of forward-facing child restraints and boosters. Seat belt buckles in outboard positions accommodated the width of boosters better than center positions (success rates of 85.4 and 34.7%, respectively). Adequate head restraint clearance occurred in 71.9 to 77.2% of combinations, depending on the booster's head support setting. Booster recline angles aligned properly with vehicle seat cushion angles in 71.5% of combinations. In cases of poor angle alignment, booster angles were more obtuse than the vehicle seat angles 97.7% of the time. Head restraint interference exacerbated angle alignment issues. Data indicate success rates above 90% for boosters being fully supported by the length of the seat cushion and for adequate height clearance with the vehicle roofline. Comparison to ISO envelopes indicates that most boosters on the U.S. market are taller and angled more obtusely than ISO target envelopes. This study quantifies some of the common interferences between boosters and vehicles that may complicate booster usage. Data are useful for design and to prioritize specific problem areas.

  14. Child seat belt guidelines: Examining the 4 feet 9 inches rule as the standard.

    Science.gov (United States)

    Morse, Amber M; Aitken, Mary E; Mullins, Samantha H; Miller, Beverly K; Pomtree, Mindy M; Ulloa, Erin M; Montgomery, Jeffrey S; Saylors, Marie E

    2017-08-01

    Current American Academy of Pediatrics recommendations regarding transition from child safety/booster seat to adult safety belt use indicate that children should be at least 4 feet 9 inches, 8 years old, or 80 pounds. Proper fit in the vehicle seat, assessed with a five-point fit test, should also be met. Although most children reach 4 feet 9 inches around age 8 years, each child and vehicle presents a unique combination; thus a child may not fit appropriately in all vehicle types using only the 4 feet 9 inches requirement. We enrolled children, aged 7 years to 12 years, into our study. Height, weight, and demographic data were obtained. A Child Passenger Safety Technician then performed the five-point fit test in each of a uniform lineup of five vehicles. Data were collected on fit in the standard vehicle seat and also in a booster seat. We set 90% as the threshold proportion of children who meet all criteria for proper fit to validate current recommendations of a height of 4 feet 9 inches. Data were collected on 388 children. The percentage of 90% proper fit was met in the compact car and small sport-utility vehicle (SUV). However, only 80 (77%) of 104 students (p vehicles (large SUVs and trucks). This emphasizes the need for evaluation of fit by a trained personnel and/or development of standard back seat dimensions in all vehicles for maximum safety. Epidemiologic study, level III; Therapeutic study, level V.

  15. 14 CFR 135.113 - Passenger occupancy of pilot seat.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Passenger occupancy of pilot seat. 135.113... Operations § 135.113 Passenger occupancy of pilot seat. No certificate holder may operate an aircraft type certificated after October 15, 1971, that has a passenger seating configuration, excluding any pilot seat, of...

  16. Compliance with Seat Belt Use in Makurdi, Nigeria: An ...

    African Journals Online (AJOL)

    Background: Seat belts are designed to reduce injuries due to road crash among vehicle occupants. Aims: This study aims to determine the availability of seat belt in vehicles and compliance with seat belt use among vehicle occupants. Materials and methods: This was a 24‑h direct observational study of seat belt usage ...

  17. Valve seat pores sealed with thermosetting monomer

    Science.gov (United States)

    Olmore, A. B.

    1966-01-01

    Hard anodic coating provides a smooth wear resistant value seating surface on a cast aluminum alloy valve body. Vacuum impregnation with a thermosetting monomer, diallyl phthalate, seals the pores on the coating to prevent galvanic corrosion.

  18. The dynamic response of human subjects while seated in car seats.

    OpenAIRE

    Pope, M. H.; Magnusson, M.; Broman, N. H.; Hasson, T.

    1998-01-01

    A pendulum impact method was used to establish the dynamic response of the seated subject. Threaded K wires were placed in the L3 spinous process. The gain and phase angle between the platform and the vertebra were established. The response of the subject was observed while seated on a platform and a variety of other seats. The seats were found to be very important in the attenuation of the impulse, leading to a higher transmissibility. Clinical Relevance Skeletal impact through the lower ext...

  19. Seat-belt message and the law?

    Science.gov (United States)

    Sengupta, S K; Patil, N G; Law, G

    1989-09-01

    This paper attempts to draw together available information on the use of seat belts, one of the most important safety devices for a person in a car. Considering the high rate of mortality and morbidity due to road traffic accidents in Papua New Guinea the authors strongly feel that seat-belt usage should be made compulsory. When one looks at the history of the implementation of such a successful countermeasure in other countries it seems that legislation is the only answer.

  20. Fabrics for fire resistant passenger seats in aircraft

    Science.gov (United States)

    Tesoro, G. C.

    1978-01-01

    The essential elements of the problem and of approaches to improved fire resistance in aircraft seats are reviewed. The performance requirements and availability of materials, delay in the ignition of upholstery fabric by a small source are considered a realistic objective. Results of experimental studies on the thermal response of fabrics and fabric/foam combinations suggest significant conclusions regarding: (1) the ignition behavior of a commercial 90/10 wool/nylon upholstery fabric relative to fabrics made from thermally stable polymers; (2) the role of the foam backing; (3) the behavior of seams. These results, coupled with data from other sources, also confirm the importance of materials' interactions in multicomponent assemblies, and the need for system testing prior to materials' selection. The use of an interlinear or thermal barrier between upholstery fabric and foam is a promising and viable approach to improved fire resistance of the seat assembly, but experimental evaluation of specific combinations of materials or systems is an essential part of the selection process.

  1. Back Pain

    Science.gov (United States)

    ... addition, there doesn't appear to be one type of mattress that's best for people with back pain. It's probably a ... of Nondiscrimination Advertising Mayo Clinic is a not-for-profit organization ...

  2. Social prejudice hindering proper use of car safety seats.

    Science.gov (United States)

    Kanburoglu, Mehmet Kenan; Cizmeci, Mehmet Nevzat; Akelma, Ahmet Zulfikar; Orun, Emel; Yesilyurt, Kubra; Tatli, Mustafa Mansur

    2013-12-01

    The compliance of parents with child passenger safety (CPS) has been mainly explained by their level of knowledge. Social, ethnic and cultural factors have not been investigated in detail. This study investigated the rate of compliance of parents with CPS guidelines, as well as the factors hindering it. Parents of infants aged 2-10 days were enrolled. The proportions of families obtaining a car safety seat (CSS; 57%) and complying with CPS recommendations (2%) were very low. Most of the parents thought CSS were harmful for infants (mother, 57%; father, 63%), despite having already purchased one. Parents believed their children to be too small to use CSS and cannot sit in CSS because they should lie flat on their backs at all times. These prejudices may be due to the social and cultural circumstances specific to Turkey, or corresponding findings may be found in countries with similar socioeconomic status. © 2013 The Authors. Pediatrics International © 2013 Japan Pediatric Society.

  3. Numerical and Experimental Investigation on the Performance of a Thermoelectric Cooling Automotive Seat

    Science.gov (United States)

    Su, Chuqi; Dong, Wenbin; Deng, Yadong; Wang, Yiping; Liu, Xun

    2018-06-01

    Heating, ventilating and air conditioning (HVAC) is the most significant auxiliary load in vehicles and largely increases extra emissions. Therefore, thermoelectric cooling automotive seat, a relatively new technology, is used in an attempt to reduce HVAC consumption and improve thermal comfort. In this study, three design schemes of the thermoelectric cooler (TEC) are proposed. Then the numerical simulation is used to analyze their heat transfer performance, and evaluate the improvement of the seat cooling in terms of the occupant back thermal comfort. Moreover, an experiment is conducted to validate the accuracy of the simulation results. The experimental results show that: (1) an average reduction in air temperature of 4°C in 60 s is obtained; (2) the temperature of the occupant's back drops from 33.5°C to 25.7°C in cooperation with the HVAC system; (3) back thermal comfort is greatly improved. As expected, the thermoelectric cooling automotive seat is able to provide an improvement in the occupant's thermal comfort at a reduced energy consumption rate, which makes it promising for vehicular application.

  4. Design Control Systems of Human Machine Interface in the NTVS-2894 Seat Grinder Machine to Increase the Productivity

    Science.gov (United States)

    Ardi, S.; Ardyansyah, D.

    2018-02-01

    In the Manufacturing of automotive spare parts, increased sales of vehicles is resulted in increased demand for production of engine valve of the customer. To meet customer demand, we carry out improvement and overhaul of the NTVS-2894 seat grinder machine on a machining line. NTVS-2894 seat grinder machine has been decreased machine productivity, the amount of trouble, and the amount of downtime. To overcome these problems on overhaul the NTVS-2984 seat grinder machine include mechanical and programs, is to do the design and manufacture of HMI (Human Machine Interface) GP-4501T program. Because of the time prior to the overhaul, NTVS-2894 seat grinder machine does not have a backup HMI (Human Machine Interface) program. The goal of the design and manufacture in this program is to improve the achievement of production, and allows an operator to operate beside it easier to troubleshoot the NTVS-2894 seat grinder machine thereby reducing downtime on the NTVS-2894 seat grinder machine. The results after the design are HMI program successfully made it back, machine productivity increased by 34.8%, the amount of trouble, and downtime decreased 40% decrease from 3,160 minutes to 1,700 minutes. The implication of our design, it could facilitate the operator in operating machine and the technician easer to maintain and do the troubleshooting the machine problems.

  5. Child seat belt guidelines: Examining the 4 feet 9 inches rule as the standard.

    Science.gov (United States)

    Morse, Amber M; Aitken, Mary E; Mullins, Samantha H; Miller, Beverly K; Pomtree, Mindy M; Ulloa, Erin M; Montgomery, Jeffrey S; Saylors, Marie E

    2017-11-01

    Current American Academy of Pediatrics recommendations regarding transition from child safety/booster seat to adult safety belt use indicate that children should be at least 4 feet 9 inches, 8 years old, or 80 pounds. Proper fit in the vehicle seat, assessed with a five-point fit test, should also be met. Although most children reach 4 feet 9 inches around age 8 years, each child and vehicle presents a unique combination; thus a child may not fit appropriately in all vehicle types using only the 4 feet 9 inches requirement. We enrolled children, aged 7 years to 12 years, into our study. Height, weight, and demographic data were obtained. A Child Passenger Safety Technician then performed the five-point fit test in each of a uniform lineup of five vehicles. Data were collected on fit in the standard vehicle seat and also in a booster seat. We set 90% as the threshold proportion of children who meet all criteria for proper fit to validate current recommendations of a height of 4 feet 9 inches. Data were collected on 388 children. The percentage of 90% proper fit was met in the compact car and small sport-utility vehicle (SUV). However, only 80 (77%) of 104 students (p guidelines for an adult seat belt do not meet safety requirements for fit, especially in larger, commonly used vehicles (large SUVs and trucks). This emphasizes the need for evaluation of fit by a trained personnel and/or development of standard back seat dimensions in all vehicles for maximum safety. Epidemiologic level 1.

  6. Deep-seated sarcomas of the penis

    Directory of Open Access Journals (Sweden)

    Alberto A. Antunes

    2005-06-01

    Full Text Available Mesenchymal neoplasias represent 5% of tumors affecting the penis. Due to the rarity of such tumors, there is no agreement concerning the best method for staging and managing these patients. Sarcomas of the penis can be classified as deep-seated if they derive from the structures forming the spongy body and the cavernous bodies. Superficial lesions are usually low-grade and show a small tendency towards distant metastasis. In contrast, deep-seated lesions usually show behavior that is more aggressive and have poorer prognosis. The authors report 3 cases of deep-seated primary sarcomas of the penis and review the literature on this rare and aggressive neoplasia.

  7. Fighting Back

    Science.gov (United States)

    Academe, 2005

    2005-01-01

    In this new feature of the "Academe" journal, work by faculty members is highlighted who are mobilizing in support of academic freedom on their campuses and beyond. This September-October issue of the journal includes the following brief reflections from faculty all relating to the central theme of "fighting back": "Free…

  8. Civil aircraft side-facing seat research summary.

    Science.gov (United States)

    2012-11-01

    The Federal Aviation Administration (FAA) has standards and regulations that are intended to protect aircraft : occupants in the event of a crash. However, side-facing seats were not specifically addressed when aircraft seat : dynamic test standards ...

  9. Automated recognition of rear seat occupants' head position using Kinect™ 3D point cloud.

    Science.gov (United States)

    Loeb, Helen; Kim, Jinyong; Arbogast, Kristy; Kuo, Jonny; Koppel, Sjaan; Cross, Suzanne; Charlton, Judith

    2017-12-01

    Child occupant safety in motor-vehicle crashes is evaluated using Anthropomorphic Test Devices (ATD) seated in optimal positions. However, child occupants often assume suboptimal positions during real-world driving trips. Head impact to the seat back has been identified as one important injury causation scenario for seat belt restrained, head-injured children (Bohman et al., 2011). There is therefore a need to understand the interaction of children with the Child Restraint System to optimize protection. Naturalistic driving studies (NDS) will improve understanding of out-of-position (OOP) trends. To quantify OOP positions, an NDS was conducted. Families used a study vehicle for two weeks during their everyday driving trips. The positions of rear-seated child occupants, representing 22 families, were evaluated. The study vehicle - instrumented with data acquisition systems, including Microsoft Kinect™ V1 - recorded rear seat occupants in 1120 driving 26 trips. Three novel analytical methods were used to analyze data. To assess skeletal tracking accuracy, analysts recorded occurrences where Kinect™ exhibited invalid head recognition among a randomly-selected subset (81 trips). Errors included incorrect target detection (e.g., vehicle headrest) or environmental interference (e.g., sunlight). When head data was present, Kinect™ was correct 41% of the time; two other algorithms - filtering for extreme motion, and background subtraction/head-based depth detection are described in this paper and preliminary results are presented. Accuracy estimates were not possible because of their experimental nature and the difficulty to use a ground truth for this large database. This NDS tested methods to quantify the frequency and magnitude of head positions for rear-seated child occupants utilizing Kinect™ motion-tracking. This study's results informed recent ATD sled tests that replicated observed positions (most common and most extreme), and assessed the validity of child

  10. The repeatability and reproducibility of the BioRID IIg in a repeatable laboratory seat based on a production car seat.

    Science.gov (United States)

    Hynd, David; Depinet, Paul; Lorenz, Bernd

    2013-01-01

    The United Nations Economic Commission for Europe Informal Group on GTR No. 7 Phase 2 are working to define a build level for the BioRID II rear impact (whiplash) crash test dummy that ensures repeatable and reproducible performance in a test procedure that has been proposed for future legislation. This includes the specification of dummy hardware, as well as the development of comprehensive certification procedures for the dummy. This study evaluated whether the dummy build level and certification procedures deliver the desired level of repeatability and reproducibility. A custom-designed laboratory seat was made using the seat base, back, and head restraint from a production car seat to ensure a representative interface with the dummy. The seat back was reinforced for use in multiple tests and the recliner mechanism was replaced by an external spring-damper mechanism. A total of 65 tests were performed with 6 BioRID IIg dummies using the draft GTR No.7 sled pulse and seating procedure. All dummies were subject to the build, maintenance, and certification procedures defined by the Informal Group. The test condition was highly repeatable, with a very repeatable pulse, a well-controlled seat back response, and minimal observed degradation of seat foams. The results showed qualitatively reasonable repeatability and reproducibility for the upper torso and head accelerations, as well as for T1 Fx and upper neck Fx . However, reproducibility was not acceptable for T1 and upper neck Fz or for T1 and upper neck My . The Informal Group has not selected injury or seat assessment criteria for use with BioRID II, so it is not known whether these channels would be used in the regulation. However, the ramping-up behavior of the dummy showed poor reproducibility, which would be expected to affect the reproducibility of dummy measurements in general. Pelvis and spine characteristics were found to significantly influence the dummy measurements for which poor reproducibility was

  11. The Effects of Prototype Helicopter Seat Cushion Concepts on Human Body Vibration Response

    National Research Council Canada - National Science Library

    Smith, Suzanne

    1998-01-01

    ...), and thigh, and the input at the seat. Seating configurations included the rigid seat, a current inventory seat cushion, and a prototype cushion with an inflatable thigh support in both the deflated and inflated positions...

  12. Study to develop improved fire resistant aircraft passenger seat materials

    Science.gov (United States)

    Duskin, F. E.; Schutter, K. J.; Sieth, H. H.; Trabold, E. L.

    1980-01-01

    The Phase 3 study of the NASA 'Improved Fire Resistant Aircraft Seat Materials' involved fire tests of improved materials in multilayered combinations representative of cushion configurations. Tests were conducted to determine their thermal, smoke, and fire resistance characteristics. Additionally, a 'Design Guideline' for Fire Resistant Passenger Seats was written outlining general seat design considerations. Finally, a three-abreast 'Tourist Class' passenger seat assembly fabricated from the most advanced fire-resistant materials was delivered.

  13. 75 FR 58340 - Airworthiness Directives; Koito Industries, Ltd., Seats and Seating Systems Approved Under...

    Science.gov (United States)

    2010-09-24

    ... under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States... cable, hook and loop (hook and loop is a generic term for Velcro), leather cover that is glued to seat...

  14. Percentage of Drivers and Front Seat Passengers Wearing Seat Belts, 2012 & 2014, All States

    Data.gov (United States)

    U.S. Department of Health & Human Services — Source for 2012 national data: National Occupant Protection Use Survey (NOPUS), 2012. Source for 2012 state data: State Observational Survey of Seat Belt Use, 2012....

  15. 49 CFR 571.207 - Standard No. 207; Seating systems.

    Science.gov (United States)

    2010-10-01

    ... standard establishes requirements for seats, their attachment assemblies, and their installation to....2. General performance requirements. When tested in accordance with S5, each occupant seat shall... than a school bus; a passenger seat on a school bus with a GVWR greater than 4,536 kilograms (10,000...

  16. Classroom Seating Considerations for 21st Century Students and Faculty

    Science.gov (United States)

    Harvey, Eugene J.; Kenyon, Melaine C.

    2013-01-01

    This quantitative, cross-sectional research study explored students' perceptions of five different seating styles within typical classrooms in an urban public higher education institution. The five seating styles included: modern mobile chairs, tablet arm chairs, fixed tiered seating with tablet arms, rectangle tables with standard chairs, and…

  17. Low back pain - acute

    Science.gov (United States)

    Backache; Low back pain; Lumbar pain; Pain - back; Acute back pain; Back pain - new; Back pain - short-term; Back strain - new ... lower back supports most of your body's weight. Low back pain is the number two reason that Americans see ...

  18. TU-H-CAMPUS-TeP1-02: Seated Treatment: Setup Uncertainty Comparable to Supine

    Energy Technology Data Exchange (ETDEWEB)

    McCarroll, R [UT MD Anderson Cancer Center, Houston, TX (United States); UT Health Science Center, Graduate School of Biomedical Sciences, Houston, TX (United States); Beadle, B; Fullen, D; Balter, P; Followill, D; Stingo, F; Yang, J; Court, L [UT MD Anderson Cancer Center, Houston, TX (United States)

    2016-06-15

    Purpose: For some head and neck patients, positioning in the supine position is not well tolerated. For these patients, treatment in a seated position would be preferred. We have evaluated inter- and intra- fraction uncertainty of patient set-up in a novel treatment chair which is compatible with modern linac designs. Methods: Five head-and-neck cancer patients were positioned in the chair, fitted with immobilization devices, and imaged with orthogonal X-rays. The couch (with chair attached) was rotated to simulate delivery (without actual treatment), another set of images were acquired, providing a measure of intra-fraction displacement. The patient then got off of and back onto the chair and the process was repeated, thus providing a measure of inter-fraction set-up uncertainty. Six sub-regions in the head-and-neck were rigidly registered to evaluate local intra- and interfraction displacement. Image guidance was simulated by first registering one sub-region; the residual displacement of other sub-regions was then measured. Additionally, a patient questionnaire was administered to evaluate tolerance of the seated position. Results: The chair design is such that all advantages of couch motions may be utilized. Average inter- and intrafraction displacements of all sub-regions in the seated position were less than 2 and 3 mm, respectively. When image guidance was simulated, interfraction displacements were reduced by an average of 4 mm, providing comparable setup to the supine position. The enrolled patients, who had no indication for a seated treatment position, reported no preference for the seated or the supine position. Conclusion: The novel chair design provides acceptable inter- and intra-fraction displacement, with reproducibility similar to that observed for patients in the supine position. Such a chair will be utilized for patients who cannot tolerate the supine position and use with CBCT images for planning, in a fixed-beam linac system, and for other

  19. Aortic ruptures in seat belt wearers.

    Science.gov (United States)

    Arajärvi, E; Santavirta, S; Tolonen, J

    1989-09-01

    Several investigations have indicated that rupture of the thoracic aorta is one of the leading causes of immediate death in victims of road traffic accidents. In Finland in 1983, 92% of front-seat passengers were seat belt wearers on highways and 82% in build-up areas. The mechanisms of rupture of the aorta have been intensively investigated, but the relationship between seat belt wearing and injury mechanisms leading to aortic rupture is still largely unknown. This study comprises 4169 fatally injured victims investigated by the Boards of Traffic Accident Investigation of Insurance Companies during the period 1972 to 1985. Chest injuries were recorded as the main cause of death in 1121 (26.9%) victims, 207 (5.0%) of those victims having worn a seat belt. Aortic ruptures were found at autopsy in 98 victims and the exact information of the location of the aortic tears was available in 68. For a control group, we analyzed 72 randomly chosen unbelted victims who had a fatal aortic rupture in similar accidents. The location of the aortic rupture in unbelted victims was more often in the ascending aorta, especially in drivers, whereas in seat belt wearers the distal descending aorta was statistically more often ruptured, especially in right-front passengers (p less than 0.05). The steering wheel predominated statistically as the part of the car estimated to have caused the injury in unbelted victims (37/72), and some interior part of the car was the most common cause of fatal thoracic impacts in seat belt wearers (48/68) (p less than 0.001). The mechanism of rupture of the aorta in the classic site just distal to the subclavian artery seems to be rapid deceleration, although complex body movements are also responsible in side impact collisions. The main mechanism leading to rupture of the ascending aorta seems to be severe blow to the bony thorax. This also often causes associated thoracic injuries, such as heart rupture and sternal fracture. Injuries in the ascending

  20. Adaptive magnetorheological seat suspension for shock mitigation

    Science.gov (United States)

    Singh, Harinder Jit

    This research focuses on theoretical and experimental analysis of an adaptive seat suspension employing magnetorheological energy absorber with the objective of minimizing injury potential to seated occupant of different weights subjected to broader crash intensities. The research was segmented into three tasks: (1) development of magnetorheological energy absorber, (2) biodynamic modeling of a seated occupant, and (3) control schemes for shock mitigation. A linear stroking semi-active magnetorheological energy absorber (MREA) was designed, fabricated and tested for intense impact conditions with piston velocities up to 8 m/s. MREA design was optimized on the basis of Bingham-plastic model (BPM model) in order to maximize the energy absorption capabilities at high impact velocities. Computational fluid dynamics and magnetic FE analysis were conducted to validate MREA performance. Subsequently, low-speed cyclic testing (0-2 Hz subjected to 0-5.5 A) and high-speed drop testing (0-4.5 m/s at 0 A) were conducted for quantitative comparison with the numerical simulations. Later, a nonlinear four degrees-of-freedom biodynamic model representing a seated 50th percentile male occupant was developed on the basis of experiments conducted on Hybrid II 50th percentile male anthropomorphic test device. The response of proposed biodynamic model was compared quantitatively against two different biodynamic models from the literature that are heavily implemented for obtaining biodynamic response under impact conditions. The proposed biodynamic model accurately predicts peak magnitude, overall shape and the duration of the biodynamic transient response, with minimal phase shift. The biodynamic model was further validated against 16 impact tests conducted on horizontal accelerator facility at NAVAIR for two different shock intensities. Compliance effects of human body were also investigated on the performance of adaptive seat suspension by comparing the proposed biodynamic model

  1. Protection of children restrained in child safety seats in side impact crashes.

    Science.gov (United States)

    Arbogast, Kristy B; Locey, Caitlin M; Zonfrillo, Mark R; Maltese, Matthew R

    2010-10-01

    The performance of child restraint systems (CRS) in side impact motor vehicle crashes has been under study due to the injury and fatality burden of these events. Although previous research has quantified injury risk or described injured body regions, safety advances require an understanding of injury causation. Therefore, the objective was to delineate injury causation scenarios for CRS-restrained children in side impacts and document probable contact points in the vehicle interior. Two in-depth crash investigation databases, the Crash Injury Research and Engineering Network and the Partners for Child Passenger Safety Study, were queried for rear-seated, CRS-restrained children in side impact crashes who sustained Abbreviated Injury Scale 2+ injury. These cases were reviewed by a multidisciplinary team of physicians and engineers to describe injury patterns, injury causation, and vehicle components that contributed to the injuries. Forty-one occupants (average age, 2.6 years) met the inclusion criteria. Twenty-four were near side to the crash, 7 were far side, and 10 were center seated. The most common injuries were to the skull and brain with an increasing proportion of skull fracture as age increased. Head and spine injuries without evidence of head contact were rare but present. All thoracic injuries were lung contusions and no rib fractures occurred. Near-side head and face contacts points were along the rear vertical plane of the window and the horizontal plane of the window sill. Head and face contact points for center- and far-side occupants were along the edges of the front seat back and front seat head restraint. Head injuries are the target for injury prevention for children in CRS in side impact crashes. Most of these injuries are due to the contact; for near-side occupants, contact with the CRS structure and the door interior, for far- or center-seated occupants, contact with the front seat back. These data are useful in developing both educational and

  2. La nuova sfida di SEAT Pagine Gialle

    Directory of Open Access Journals (Sweden)

    Leonardo Landini

    2008-03-01

    Full Text Available SEAT Pagine Gialle’s new challengeSEAT Pagine Gialle is a company that for over 80 years has provided information services, search and communication tools.The companies success and notoriety is built on a customer base of about 20 million families and 3 million professional operators with a continually updated technology with which it integrates with detailed geographical information that allows it to reach millions of users every day. The services the company offers include an advanced cartographic web-based search, satellite and aerial photos, the calculation of driving instructions, weather forecasts and traffic information, 360 degree views and the modelling of whole cities in 3D.

  3. A field-based approach for examining bicycle seat design effects on seat pressure and perceived stability.

    Science.gov (United States)

    Bressel, Eadric; Bliss, Shantelle; Cronin, John

    2009-05-01

    The purpose of this study was to investigate the effect of various bicycle seat designs on seat pressure and perceived stability in male and female cyclists using a unique field-based methodology. Thirty participants, comprising male and female cyclists, pedaled a bicycle at 118W over a 350m flat course under three different seat conditions: standard seat, a seat with a partial anterior cutout, and a seat with a complete anterior cutout. The pressure between the bicycle seat and perineum of the cyclist was collected with a remote pressure-sensing mat, and perceived stability was assessed using a continuous visual analogue scale. Anterior seat pressure and stability values for the complete cutout seat were significantly lower (p<0.05; 62-101%) than values for the standard and partial cutout designs. These findings were consistent between males and females. Our results would support the contention that the choice of saddle design should not be dictated by interface pressure alone since optimal anterior seat pressure and perceived seat stability appear to be inversely related.

  4. The seated bus passenger--a review.

    Science.gov (United States)

    Levis, J A

    1978-09-01

    The paper describes the inter-relationship of anthropometry, rig studies and dynamic testing of aspects related to problems of the seated bus passenger. It seeks to draw together sub-sections of a very large study sponsored by the government through the Transport and Road Research Laboratory and undertaken by the Human Factors Group of Leyland Truck and Bus. It is relevant to all those designing passenger carrying transport systems.

  5. Front versus rear seat placement of children aged 12 or younger within vehicles: a rural/urban comparison in North Dakota.

    Science.gov (United States)

    Huseth-Zosel, Andrea L

    2012-01-01

    Research has shown that rear-seated children are 36 to 40 percent safer than front-seated children. Because of the substantial differences in traffic safety culture that appear to exist in rural areas and the limited research regarding seat placement and rurality, this study seeks to contribute to the safety literature by determining at what rate children are riding in the front seat and whether differences exist between rural and urban areas in regards to child front seat placement. Current child placement frequencies within vehicles were ascertained through direct observations of morning child drop-offs at randomly selected urban and rural elementary schools in eastern North Dakota during November and December of 2009, with a focus on children aged 12 or younger. Two observers wearing orange safety vests and carrying observation sheets were stationed at each elementary school a minimum of 45 min prior to each school's designated start time. Based on the vehicles that entered the school's parking lot/drop-off circle and from which a minimum of one child exited, observers were instructed to record vehicle type, presence of children in the front seat appearing to be younger than 13 years old, availability of room in the back seat, and placement of other children in the vehicle. During November and December of 2009 a total of 537 vehicles were observed at urban schools and 150 vehicles were observed at rural schools. Of the 537 vehicles observed at urban schools, 28.7 percent had children seated in the front seat, whereas 41.3 percent of the 150 vehicles observed at rural schools had front-seated children. Significant urban/rural differences exist in child seat placement, with vehicles in rural areas much more likely to be carrying front-seated children than vehicles in urban areas. Based on a sample of vehicles observed at urban and rural elementary schools in North Dakota, the results of this study indicate that there are significant rural/urban differences in

  6. Comparison of Abdominal Muscles Thickness Changes Different Postures beween Non-Specific Chronic Low Back Pain Patients and Healthy Males by Ultrasonography

    Directory of Open Access Journals (Sweden)

    Omid Rasouli

    2010-01-01

    Conclusion: Abdominal muscles respond to postural changes and these muscles are automatically targeted by decreasing the seated stability. In non–specific chronic low back pain patients, activity of Transvers Abdominis was decreased and activity of Rectus Abdominis was increased.

  7. Sliding and pressure evaluation on conventional and V-shaped seats of reclining wheelchairs for stroke patients with flaccid hemiplegia: a crossover trial

    Directory of Open Access Journals (Sweden)

    Chen Chi-Myn

    2011-07-01

    with flaccid hemiplegia. The back displacement of able-bodied subjects when using both conventional and V-shape seats in reclining positions differs from the back displacement of stroke patients with flaccid hemiplegia when using such seats. These results are of paramount value and should be considered when prescribing the use of reclining wheelchairs to subjects with flaccid hemiplegia.

  8. Back Pain During Pregnancy

    Science.gov (United States)

    ... Advocacy For Patients About ACOG Back Pain During Pregnancy Home For Patients Search FAQs Back Pain During ... FAQ115, January 2016 PDF Format Back Pain During Pregnancy Pregnancy What causes back pain during pregnancy? How ...

  9. SEAT CHOICE AND DISTANCE JUDGMENT IN PUBLIC SPACES (1).

    Science.gov (United States)

    Neto, Olavo Avalone; Munakata, Jun

    2015-10-01

    This research assessed whether public space users will adopt a least-effort approach and choose a less suitable seat nearby or seek the most suitable seat, even if it is farther away from them when the decision is made. How distance assessment affects seat choice was investigated through an observational survey, which allowed the identification of behavioral patterns. Those behavioral patterns were then tested in a paired comparison experiment with 40 participants. The results showed that the effect of distance on seat choice is related to the difference in distance between the options and that a sufficient difference can cause trade-offs between distance and seat properties. The necessary difference in distance is conditioned by the activity and the seat properties.

  10. Optimization of Aircraft Seat Cushion Fire Blocking Layers.

    Science.gov (United States)

    1983-03-01

    function of cost and weight, and the costs of labor involved in assembling a ccmposite seat cushion. The same classes of high char yield polymers that are...SEAT LATER DESIGN REPORT NRBBNBsg$$$$$$NN$$R$$$$$ SEAT DESIGN NUMBER: 009 LAYER NAME CODE NO. S MANUFACTURER 5 COST FACTORS . LABOR ...72621, 9096.. 7SS43. 73757. 77147. DELTA COSTS 0. 8340. 2922. 1136. 4327. ACOSOS in Iho..aS Of dollars. COST SUIRNY REPORT Re ....... VONR3 MORFA

  11. Seat Belt Use Intention among Brazilian Undergraduate Students

    OpenAIRE

    TORQUATO, RENATA; FRANCO, CLÁUDIO M. A; BIANCHI, ALESSANDRA

    2012-01-01

    The objectives of this study were to explore self-reported seat belt use and group differences in different scenarios in a Brazilian sample and research the variables related to it. 120 college students answered a questionnaire with variables from the theory of planned behavior in order to evaluate the intention of seat belt use among car occupants. Results indicated that attitude and intention were the variables that most contributed to explaining seat belt use. Intention was highly correlat...

  12. A Functional Analysis of DOD Implementation of Seat Management

    National Research Council Canada - National Science Library

    Rasmussen, David

    1999-01-01

    .... Seat management, also known as desktop outsourcing, involves the acquisition and management of all hardware and software, desktop and network management, operations management, support services...

  13. A target fibre study on seats in public houses.

    Science.gov (United States)

    Kelly, E; Griffin, R M

    1998-01-01

    A target fibre survey was conducted to assess the random occurrence of a blue wool fibre on seats in public houses throughout the United Kingdom. Fibre tape lifts were taken from 80 seats. Four seats yielded matching fibres and five of these were found on one seat. A total of 292 fibres were identified; nine fibres proved indistinguishable from the target after comparison microscopy, microspectro-photometry and attempts at thin layer chromatography, and two of these fibres were still apparently indistinguishable after TLC analysis although only one dye component was visible.

  14. 75 FR 30775 - Availability of Seats for the Monitor National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2010-06-02

    ..., Recreational Diving seat, Education seat, Archaeological Research seat, Maritime Museum seat, Youth seat, and... by NOAA's Office of National Marine Sanctuaries. It is one of 13 sanctuaries and protects the wreck..., Recreational Diving, the US Navy, Virginia and North Carolina Department of Historic Resources, the National...

  15. Will the Driver Seat Ever Be Empty?

    OpenAIRE

    Fraichard , Thierry

    2014-01-01

    Self-driving technologies have matured and improved to the point that, in the past few years, self-driving cars have been able to safely drive an impressive number of kilometers. It should be noted though that, in all cases, the driver seat was never empty: a human driver was behind the wheel, ready to take over whenever the situation dictated it. This is an interesting paradox since the point of a self-driving car is to remove the most unreliable part of the car, namely the human driver. So,...

  16. Vibration isolation of a ship's seat

    Science.gov (United States)

    Agahi, Maryam; Samani, Mehrdad B.; Behzad, Mehdi

    2005-05-01

    Different factors cause vibration. These vibrations make the voyages difficult and reduce comfort and convenience in passenger ships. In this paper, the creating factors of vibration have discussed first, then with mathematical modelling it will be attempted to minimize the vibration over the crew's seat. The modelling consists of a system with two degrees of freedom and by using vibrationisolation with passive method of Tuned Mass Damper (TMD) it will be tried to reduce the vibration over personnel. Moreover using active control systems will be compared with passive systems.

  17. 76 FR 31803 - Airworthiness Directives; Koito Industries, Ltd., Seats and Seating Systems Approved Under...

    Science.gov (United States)

    2011-06-02

    ... CONTACT: Patrick Farina, Aerospace Engineer, Cabin Safety Branch, ANM-150L, FAA, Los Angeles Aircraft... understands that the FAA considers this phased testing structure as an acceptable testing plan, but also... the suspect seats were witnessed by FAA ``delegates'' (designated engineering representatives (DERs...

  18. [The use of seatbelts and child seats in drivers and passengers of motor vehicles in four metropolitan areas in Mexico].

    Science.gov (United States)

    Cervantes-Trejo, Arturo; Leenen, Iwin

    2015-01-01

    To estimate the rate of seatbelt and child seat use in drivers and passengers of motor vehicles in four metropolitan areas in Mexico (Guadalajara, León, Monterrey and Mexico City). To evaluate the impact of the Mexican Initiative for Road Safety (IMESEVI) in this respect. Data were collected at the start of IMESEVI (June 2008) and one year after the program's implementation (October 2009) in the four participating metropolitan areas. In particular, the use of seatbelts and child seats was observed in occupants of automobiles, station wagons, and light trucks. The sample included 28,412 (pre) and 52,274 (post) individuals, of which 1,454 (pre) and 1,679 (post) were younger than five years old. The data analysis was based on a hierarchical logistic model. Globally, the probability of using either safety device is 46% (95% CI: 43-49%) at baseline and 52% (95% CI: 48-55%) at the post measurement, with large differences, though, among the four participating metropolitan areas. Factors that significantly affect their use include the individual's position in the vehicle, the type and age of the vehicle, and the individual's sex. Child seat use is very limited. At baseline, about 17% (95% CI: 11-25%) of children below five years old travelled in a special seat, with this number increasing to 26% (95% CI: 19-34%) after the implementation of IMESEVI. Child seat use for children above four years is virtually nonexistent. Continued efforts are required to raise the public awareness of the importance of using safety devices, especially for passengers in the back of the car as well as with respect to the use of adapted seats for small children.

  19. Development of electrostatic charging evaluation equipment for automobile seat; Jidoshayo seat no taidensei shiken hyoka sochi no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Maeda, K [Mazda Motor Corp., Hiroshima (Japan)

    1997-10-01

    When passengers get out of vehicle, electrostatics is generated by separation of seat cloth and passenger cloth, and then charged to passenger`s body. It has been impossible for us to simulate this induction charging phenomenon with current evaluation equipments. We developed a new seat cloth evaluation equipments using induction charging plate, which enables us to simulate the phenomenon. This paper describes this new electrostatic charging evaluation method for automobile seat cloth. 5 refs., 6 figs.

  20. Joint overbooking and seat allocation for fare families

    DEFF Research Database (Denmark)

    Hjorth, Robert; Fiig, Thomas; Bondoux, Nicolas

    2016-01-01

    Revenue Management Systems (RMS) traditionally solve the seat allocation problem separately from the overbooking problem. Overbooking is managed by inflating the authorization levels obtained from seat allocation by various heuristics. This approach although suboptimal, is necessitated because...... independent demand model, which is readily solved. The resulting availability control can easily by implemented in existing RMS...

  1. Assessment of Rail Seat Abrasion Patterns and Environment

    Science.gov (United States)

    2012-05-01

    Rail seat abrasion (RSA) of concrete ties is manifested by the loss of material under the rail seat area and, in extreme cases, results in loss of rail clip holding power, reverse rail cant, and gauge widening. RSA was measured in several curves on t...

  2. Restraint use and seating position among children in motor vehicles ...

    African Journals Online (AJOL)

    Just over a third of the children were seated on the front seat of the vehicle, ... meaning adult will be dislodged by the huge gravitational forces in the case of an ..... action. 2009. http://whqlibdoc.who.int/publications/2009/9789241563840_.

  3. Identifying strategies to improve the effectiveness of booster seat laws

    Science.gov (United States)

    2008-05-01

    The objective of this project was to identify strategies to improve the effectiveness of booster seat laws. The project explored the possible factors that relate to the use and nonuse of booster seats, and examined the attitudes of law enforcement of...

  4. Musculoskeletal analysis of driving fatigue: The influence of seat adjustments

    DEFF Research Database (Denmark)

    Majid, Noor Aliah binti Abdul; Abdullah, Mohd Fareez Edzuan; Jamaludin, Mohd Syahmi

    2013-01-01

    Main causes for discomfort experienced by vehicle drivers during driving were investigated using a rigid-body model originally developed in the AnyBody Modeling System [1]. The interactions between the human body and the car-seat in various combinations of seat-pan/backrest inclinations and the e...

  5. 14 CFR 125.211 - Seat and safety belts.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Seat and safety belts. 125.211 Section 125... Requirements § 125.211 Seat and safety belts. (a) No person may operate an airplane unless there are available... the airplane who is at least 2 years old; and (2) An approved safety belt for separate use by each...

  6. Self-reported seat discomfort among Dutch commercial truck drivers

    NARCIS (Netherlands)

    Tan, C.F.; Chen, W.; Rauterberg, G.W.M.

    2010-01-01

    Comfort is an attribute that today’s consumers demand more and more. The seat has an important role to play in fulfilling these comfort expectations. Seating comfort is a major concern for drivers and other members of the work force who are exposed to extended periods of sitting and its associated

  7. Lightweight, fire-retardant, crashworthy aircraft seat cushioning

    Science.gov (United States)

    Haslim, Leonard A.; Mcdonough, Paul T.

    1991-01-01

    A two page discussion of non-aerospace seating applications and the design of NASA's safety seat cushioning (SSC) is presented. The SSC was designed for both safety and comfort in order to replace polyurethane cushioning which is flammable and produces lethal fumes upon combustion. The SSC is composed of advanced fabric reinforced composites and is lightweight, fire-retardent, and crashworthy. The seat design consists of central elliptical tubular spring supports made of fire-resistant and fatigue-durable composites surrounded by a fire-blocking sheath. The cushioning is made crashworthy by incorporating energy-absorbing, viscoelastic layers between the nested, elliptical-hoop springs. The design is intended to provide comfortable seating that meets aircraft-loading requirements without using the conventional polyurethane materials. The designs of an aircraft seat and structural components of the SSC are also presented.

  8. The effects of seat belt legislation on road traffic injuries.

    Science.gov (United States)

    Trinca, G W; Dooley, B J

    1977-04-01

    The compulsory wearing of seat belts, first introduced in the world in Victoria in 1970, has effectively reduced the number of deaths and injuries by approximately one-third for car occupants involved in motor vehicle crashes. Initially, the legislation did not apply to children under the age of eight years, but in 1975 a further law was introduced banning children from the front seat of any vehicle unless properly harnessed. Seat belts offer the best protection for front seat drivers and passengers involved in frontal impacts, but offer less protection to the recipient of a side impact. Ten per cent of car occupants admitted to hospital after a frontal impact show injuries, mostly minor, directly attibutable to the wearing of seat belts.

  9. 75 FR 36062 - Availability of Conservation Seat and Diving Operations Seat for the Flower Garden Banks National...

    Science.gov (United States)

    2010-06-24

    ... Conservation Seat and Diving Operations Seat for the Flower Garden Banks National Marine Sanctuary Advisory... Flower Garden Banks National Marine Sanctuary Advisory Council: Conservation and Diving Operations... Jennifer Morgan, NOAA--Flower Garden Banks National Marine Sanctuary, 4700 Avenue U, Bldg. 216, Galveston...

  10. Back pain and sports

    Science.gov (United States)

    ... Running - back pain; Weightlifting - back pain; Lumbar pain - sports; Sciatica - sports; Low back pain - sports ... MD, Thompson SR, eds. DeLee and Drez's Orthopaedic Sports Medicine: Principles and Practice . 4th ed. Philadelphia, PA: ...

  11. Finding an optimal seating arrangement for employees

    Directory of Open Access Journals (Sweden)

    Ninoslav Čerkez

    2015-10-01

    Full Text Available The paper deals with modelling a specifc problem called the Optimal Seating Arrangement (OSA as an Integer Linear Program and demonstrated that the problem can be efficiently solved by combining branch-and-bound and cutting plane methods. OSA refers to a specific scenario that could possibly happen in a corporative environment, i.e. when a company endeavors to minimize travel costs when employees travel to an organized event. Each employee is free to choose the time to travel to and from an event and it depends on personal reasons. The paper differentiates between using different travel possibilities in the OSA problem, such as using company assigned or a company owned vehicles, private vehicles or using public transport, if needed. Also, a user-friendly web application was made and is available to the public for testing purposes.

  12. In vivo measurement of lower back deformations with Fourier-transform profilometry

    International Nuclear Information System (INIS)

    Hanafi, Abdelmalek; Gharbi, Tijani; Cornu, Jean-Yves

    2005-01-01

    Through the variation of their cross sections, the in vivo response of lower back muscles to low loading in an upright seated posture is explored by the Fourier-transform profilometry technique. The maximization of its sensitivity allows us to reach an adequate resolution for the evaluation of low-back displacements. Refinements of the fringe pattern analysis permit the minimization of errors. The experiments show an asymmetric distribution of the displacement during head rotation movements. Significant contribution of the lower back to grasping exertions is also observed. These results are thought to be useful for early defect detection in the lower back

  13. The effect of a multi-axis suspension on whole body vibration exposures and physical stress in the neck and low back in agricultural tractor applications.

    Science.gov (United States)

    Kim, Jeong Ho; Dennerlein, Jack T; Johnson, Peter W

    2018-04-01

    Whole body vibration (WBV) exposures are often predominant in the fore-aft (x) or lateral (y) axis among off-road agricultural vehicles. However, as the current industry standard seats are designed to reduce mainly vertical (z) axis WBV exposures, they may be less effective in reducing drivers' exposure to multi-axial WBV. Therefore, this laboratory-based study aimed to determine the differences between a single-axial (vertical) and multi-axial (vertical + lateral) suspension seat in reducing WBV exposures, head acceleration, self-reported discomfort, and muscle activity (electromyography) of the major muscle of the low back, neck and shoulders. The results showed that the multi-axial suspension seat had significantly lower WBV exposures compared to the single-axial suspension seats (p' suspension seat had lower head acceleration and muscle activity of the neck, shoulder, and low back compared to the single-axial suspension seat; some but not all of the differences were statistically significant. These results indicate that the multi-axial suspension seat may reduce the lateral WBV exposures and associated muscular loading in the neck and low back in agricultural vehicle operators. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Back pain and low back pain

    International Nuclear Information System (INIS)

    Cotta, H.; Niethard, F.U.

    1983-01-01

    In patients with back pain there is only a poor correlation between clinical and radiological symptoms. Therefore the interpretation of radiological findings is only possible with respect to the natural history of the disease. Indication for radiological examination is given for early diagnosis and treatment of malinformation of the spine; diagnosis and treatment of functional disturbances of the spine with back- and low back pain and diagnosis and treatment of diseases which affect the stability of the vertebrae. (orig.)

  15. The Effects of Microgravity on Seated Height (Spinal Elongation)

    Science.gov (United States)

    Young, K. S.; Rajulu, S.

    2011-01-01

    ABSTRACT Many physiological factors, such as spinal elongation, fluid shifts, bone atrophy, and muscle loss, occur during an exposure to a microgravity environment. Spinal elongation is just one of the factors that can also affect the safety and performance of a crewmember while in space. Spinal elongation occurs due to the lack of gravity/compression on the spinal column. This allows for the straightening of the natural spinal curve. There is a possible fluid shift in the inter-vertebral disks that may also result in changes in height. This study aims at collecting the overall change in seated height for crewmembers exposed to a microgravity environment. During previous Programs, Apollo-Soyuz Test Project (ASTP) and Skylab, spinal elongation data was collected from a small number of subjects in a standing posture but were limited in scope. Data from these studies indicated a quick increase in stature during the first few days of weightlessness, after which stature growth reached a plateau resulting in up to a 3% increase of the original measurement [1-5]. However, this data was collected only for crewmembers in standing posture and not in a seated posture. Seated height may have a different effect than standing height due to a change in posture as well as due to a compounded effect of wearing restraints and a potential compression of the gluteal area. Seated height was deemed as a critical measurement in the design of the Constellation Program s (CxP) Crew Exploration Vehicle (CEV), called Orion which is now the point-of-departure vehicle for the Multi-Purpose Crew Vehicle (MPCV) Program; therefore a better understanding of the effects of microgravity on seated height is necessary. Potential changes in seated height that may not have impacted crew accommodation in previous Programs will have significant effects on crew accommodation due to the layout of seats in the Orion.. The current and existing configuration is such that the four crewmembers are stacked two by

  16. MACRO MODEL OF SEAT BELT USE BY CAR DRIVERS AND PASSENGERS

    Directory of Open Access Journals (Sweden)

    Kazimierz JAMROZ

    2013-12-01

    Full Text Available The article presents some problems of seat belt use by car drivers and passengers. It looks in particular at seat belt use and effectiveness in selected countries. Next, factors of seat belt use are presented and methodology of model development. A macro model of seat belt use is presented based on data from around fifty countries from different continents.

  17. A comparative policy analysis of seat belt laws : final report.

    Science.gov (United States)

    2014-06-24

    This analysis examined data from a variety of sources to estimate the benefit of enhancing Iowas current law to require all : passengers to use seat belts. In addition to assessing Iowans opinions about changing the law, a literature review, a ...

  18. Controversial Swedish science minister loses seat in reshuffle

    CERN Multimedia

    Sylawan, P

    1998-01-01

    Carl Tham, who introduced sweeping changes to higher education and research, has lost his seat in a cabinet reshuffle. As science minister for 4 years he redirected funding to applied science and established new regional universities (1 page).

  19. Like Driving from "The Back Seat": Teaching English as a Second Language in Commodified Curricular Terrains

    Science.gov (United States)

    Plaisance, Michelle; Salas, Spencer; D'Amico, Mark M.

    2018-01-01

    Contemporary K-12 standards-based educational reform has emerged as a central focus of scholarship in TESOL, with robust discussions (practical and theoretical) addressing the shift from ESL as a subject matter unto itself to teaching standards-based content in English (and the standardized assessment of students' achievement across those content…

  20. Materials for fire resistant passenger seats in aircraft

    Science.gov (United States)

    Tesoro, G.; Moussa, A.

    1980-01-01

    The paper considers the selection of cushioning foam and upholstery fabric materials for aircraft passenger seats. Polyurethane, polychloroprene, polyimide, and polyphosphazene are the foam materials considered; and a variety of commercial and developmental fabrics (including wool, cotton, synthetics, and blends) are examined. Viable approaches to the design of fire-resistant seat assemblies are indicated. Results of an experimental laboratory study of fabrics and fabric/foam assemblies exposed to external point-source radiative heat flux are discussed.

  1. Infant bath seats, drowning and near-drowning.

    Science.gov (United States)

    Byard, R W; Donald, T

    2004-01-01

    To investigate the possible role of infant bathtub seats in drowning and near-drowning episodes in infants. A review was conducted of the files of the Forensic Science Centre and Child Protection Unit, Women's and Children's Hospital, Adelaide, South Australia, for significant immersion incidents in infants involving bathtub seats from January 1998 to December 2003. A total of six cases of drowning occurred over the 6-year period of the study in children under 2 years of age, including two infants. One of these cases, a 7-month-old boy, had been left unattended for some time in an adult bath in a bathtub seat. He was found drowned, having submerged after slipping down and becoming trapped in the seat. Three near-drowning episodes occurred in children under the age of 2 years, including two boys aged 7 and 8 months, both of whom had been left for some time in adult baths in bath seats. Both were successfully resuscitated and treated in hospital. These cases demonstrate the vulnerability of infants to immersion incidents when left unattended in bathtubs. Bathtubs are particularly dangerous for infants as the slippery and smooth surfaces predispose to loss of balance and make escape from water difficult. Infant bathtub seats may give parents and child carers a false sense of security leading to infants being left unattended. Unfortunately, however, infants may fall out of, or slip and become trapped in, such seats. Infants and young children cannot be left unsupervised in water, and devices used as bathing aids such as bathtub seats may contribute to immersion incidents.

  2. Autist mobile seat's frame strength simulation used in a car

    Science.gov (United States)

    Suryo, S. H.; Jamari, J.; Naufal, G. K.; Ismail, R.; Bayuseno, A. P.; Desiningrum, D. R.

    2016-04-01

    Going on a car with autistic children needs a special handling. Autistic children that tend to be hyperactive in the car may disturb driving. A tool is needed to keep them in a calm state when they are in the car. Autist Mobile Seat is an aid for the autistic children when going on a car. The aid is an additional seat paired with the main seat of the car. This aid consists of three main things: Main frame, body skin, and pneumatic system. Frame as the main component supporting the Autist Mobile Seat functions as a holder as well as a body skin retainer in order to be able to retain the body of the autistic children. The strength of the frame from this Autist Mobile Seat should be counted as an anticipation from the failure of the frame function when receiving load when used by the autistic children in the car. Consequently, a test on the frame of the Autist Mobile Seat towards the load received should be conducted by using a method of FEM (Finite Element Method) with the help of commercial software. The simulation produces the maximum strength, the frame towards the load received as well as the critical point on the frame when loading occurs.

  3. SEAT BELT USE AMONG CAR USERS IN MALAYSIA

    Directory of Open Access Journals (Sweden)

    S. KULANTHAYAN

    2004-01-01

    Full Text Available The car is the second (40% most common mode of transportation in Malaysia. In terms of fatal road accidents, car drivers constitute about 9.0% and passengers 13.6% of fatalities. The major cause of car occupants' fatality in such accidents is head injuries, which consist of more than half (56.4% of the fatalities. Thus restraining the head and body, the initial position is the most important injury control strategy for car users. The use of seat belts was deemed one of the most effective ways to reduce road accident fatalities in Malaysia and consequently the mandatory seat belt law was enforced in the early seventies. Therefore, a study on factors influencing the compliance behaviour of seat belt use among cars is needed as to date no such research has been undertaken in Malaysia. A questionnaire study was carried out in Selangor, Malaysia on the compliance behaviour of car occupants in relation to seat belt use. A total of 237 respondents were interviewed and the data analysed using logistic regression method. Six variables were found to be significant at 5 percent level (p<0.05: seating position, location of travel, education level, speeding, night-time driving and enforcement. Compliance with the seat belt law was higher among drivers, educated car users, in the presence of enforcement activities, travelling in city-center areas and car users with a positive attitude towards the risks of speeding and night driving.

  4. Design and Evaluation Methods for Optimizing Ejection Seat Cushions for Comfort and Safety

    Science.gov (United States)

    1977-02-01

    buttocks to the seat cushion or seat pan. Kohara , a Japaners Investigator discussed the problems of seating comfort and the measuren.ent of buttock/seat...loads In an unpublished report in 1965 (23) and subsequently In a magazine article In 1966 (24). Kohara was able to weasure pressures by means of...Isolation. Kohara has also studied the vibration Isolation requirements in high speed trains (23, 2’). Howeveri the seat cushion has been used only rarely in

  5. Time course of the acute effects of core stabilisation exercise on seated postural control.

    Science.gov (United States)

    Lee, Jordan B; Brown, Stephen H M

    2017-09-20

    Core stabilisation exercises are often promoted for purposes ranging from general fitness to high-performance athletics, and the prevention and rehabilitation of back troubles. These exercises, when performed properly, may have the potential to enhance torso postural awareness and control, yet the potential for achieving immediate gains has not been completely studied. Fourteen healthy young participants performed a single bout of non-fatiguing core stabilisation exercise that consisted of repeated sets of 2 isometric exercises, the side bridge and the four-point contralateral arm-and-leg extension. Seated postural control, using an unstable balance platform on top of a force plate, was assessed before and after exercise, including multiple time points within a 20-minute follow-up period. Nine standard postural control variables were calculated at each time point, including sway displacement and velocity ranges, root mean squares and cumulative path length. Statistical analysis showed that none of the postural control variables were significantly different at any time point following completion of core stabilisation exercise. Thus, we conclude that a single bout of acute core stabilisation exercise is insufficient to immediately improve seated trunk postural control in young healthy individuals.

  6. Low back pain - chronic

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/007422.htm Low back pain - chronic To use the sharing features on this page, please enable JavaScript. Low back pain refers to pain that you feel in your ...

  7. The Study of Fabric Performance for Car Seats

    Directory of Open Access Journals (Sweden)

    Antonin Havelka

    2017-09-01

    Full Text Available This paper deals with the investigation of the performance of car seat fabrics in terms of physiological comfort of sitting, specifi cally their water vapour resistance and air permeability. The current work presents an alternative approach to increasing the effectiveness of car seat fabrics through a combination of newly designed middle layer with forced convection achieved by a supplementary suction ventilation device. The supplementary device was designed to measure water vapour permeability by means of the sweating guarded hot plate (SGHP system. It consists of two parts: a frame to grip a tested sample for measurements within the SGHP system and two suction ventilators which are arranged at one end of the mentioned frame in order to provide suction into the tested fabric plane during the SGHP test. The results of this investigation show that water vapour transport is increased by approximately 20% compared to the standard way of measurement by means of SGHP because of forced air flow in the plane of ribbed – channelled structure of the car seat middle layer. The findings of this study have a number of important implications for future practice. The combination of a car seat cover with channelled structure and forced air fl ow improves physiological comfort of sitting which is a key issue for both drivers and manufacturers. The suggested device for forced air flow convection in the plane of a car seat fabric has not yet been part of an actual car seat, however it is possible to use its principles in a smart car seat prototype.

  8. Development of a method for rating climate seat comfort

    Science.gov (United States)

    Scheffelmeier, M.; Classen, E.

    2017-10-01

    The comfort aspect in the vehicle interior is becoming increasingly important. A high comfort level offers the driver a good and secure feeling and has a strong influence on passive traffic safety. One important part of comfort is the climate aspect, especially the microclimate that emerges between passenger and seat. In this research, different combinations of typical seat materials are used. Fourteen woven and knitted fabrics and eight leathers and its substitutes for the face fabric layer, one foam, one non-woven and one 3D spacer for the plus pad layer and for the support layer three foam types with variations in structure and raw material as well as one rubber hair structure were investigated. To characterise this sample set by thermo-physiological aspects (e.g. water vapour resistance Ret, thermal resistance Rct, buffering capacity of water vapour Fd) regular and modified sweating guarded hotplates were used according to DIN EN ISO 11092. The results of the material characterisation confirm the common knowledge that seat covers out of textiles have better water vapour resistance values than leathers and its substitutes. Subject trials in a driving simulator were executed to rate the subjective sensation while driving in a vehicle seat. With a thermal, sweating Manikin (Newton Type, Thermetrics) objective product measurements were carried out on the same seat. Indeed the subject trials show that every test subject has his or her own subjective perception concerning the climate comfort. The results of the subject trials offered the parameters for the Newton measuring method. Respectively the sweating rate, sit-in procedure, ambient conditions and sensor positions on and between the seat layers must be comparable with the subject trials. By taking care of all these parameters it is possible to get repeatable and reliable results with the Newton Manikin. The subjective feelings of the test subjects, concerning the microclimate between seat and passenger, provide

  9. Effect of different seated positions on lung volume and oxygenation in acute respiratory distress syndrome.

    Science.gov (United States)

    Dellamonica, J; Lerolle, N; Sargentini, C; Hubert, S; Beduneau, G; Di Marco, F; Mercat, A; Diehl, J L; Richard, J C M; Bernardin, G; Brochard, L

    2013-06-01

    Lung volume available for ventilation is markedly decreased during acute respiratory distress syndrome. Body positioning may contribute to increase lung volume and partial verticalization is simple to perform. This study evaluated whether verticalization had parallel effects on oxygenation and end expiratory lung volume (EELV). Prospective multicenter study in 40 mechanically ventilated patients with ALI/ARDS in five university hospital MICUs. We evaluated four 45-min successive trunk position epochs (supine slightly elevated at 15°; semi recumbent with trunk elevated at 45°; seated with trunk elevated at 60° and legs down at 45°; back to supine). Arterial blood gases, EELV measured using the nitrogen washin/washout, and static compliance were measured. Responders were defined by a PaO₂/FiO₂ increase >20 % between supine and seated position. Results are median [25th-75th percentiles]. With median PEEP = 10 cmH₂O, verticalization increased lung volume but only responders (13 patients, 32 %) had a significant increase in EELV/PBW (predicted body weight) compared to baseline. This increase persisted at least partially when patients were positioned back to supine. Responders had a lower EELV/PBW supine [14 mL/kg (13-15) vs. 18 mL/kg (15-27) (p = 0.005)] and a lower compliance [30 mL/cmH₂O (22-38) vs. 42 (30-46) (p = 0.01)] than non-responders. Strain decreased with verticalization for responders. EELV/PBW increase and PaO₂/FiO₂ increase were not correlated. Verticalization is easily achieved and improves oxygenation in approximately 32 % of the patients together with an increase in EELV. Nonetheless, effect of verticalization on EELV/PBW is not predictable by PaO₂/FiO₂ increase, its monitoring may be helpful for strain optimization.

  10. Exploring the design of a lightweight, sustainable and comfortable aircraft seat.

    Science.gov (United States)

    Kokorikou, A; Vink, P; de Pauw, I C; Braca, A

    2016-07-19

    Making a lightweight seat that is also comfortable can be contradictory because usually comfort improvement means adding a feature (e.g. headrest, adjustable lumbar support, movable armrests, integrated massage systems, etc.), which makes seats heavier. This paper explores the design of an economy class aircraft seat that aims to be lightweight, comfortable and sustainable. Theory about comfort in seats, ergonomics, lightweight design, Biomimicry and Cradle to cradle was studied and resulted in a list of requirements that the new seat should satisfy. The design process resulted in a new seat that is 36% lighter than the reference seat, which showed that a significant weight reduction can be achieved. This was completed by re-designing the backrest and seat pan and integrating their functions into a reduced number of parts. Apart from the weight reduction that helps in reducing the airplane's environmental impact, the seat also satisfies most of the other sustainability requirements such as the use of recyclable materials, design for disassembly, easy to repair. A user test compared the new seat with a premium economy class aircraft seat and the level of comfort was similar. Strong points of the new design were identified such as the lumbar support and the cushioning material, as well as shortcomings on which the seat needs to be improved, like the seat pan length and the first impression. Long term comfort tests are still needed as the seat is meant for long-haul flights.

  11. Experimental study on occupant evacuation in narrow seat aisle

    Science.gov (United States)

    Huang, Shenshi; Lu, Shouxiang; Lo, Siuming; Li, Changhai; Guo, Yafei

    2018-07-01

    Narrow seat aisle is an important area in the train car interior due to the large passenger population, however evacuation therein has not gained enough concerns. In this experimental study, the occupant evacuation of the narrow seat aisle area is investigated, with the aisle width of 0.4-0.6 m and the evacuation direction of forward and backward. The evacuation behaviors are analyzed based on the video record, and the discussion is carried out in the aspect of evacuation time, crowdedness, evacuation order, and aisle conflicts. The result shows that with the increasing aisle width, total evacuation time and the average specific evacuation rate decrease. The aisle is crowded for some time, with a large linear occupant densities. The evacuation order of each occupant is mainly related to the seat position. Moreover, it is found that the aisle conflicts can be well described by Burstedde's model. This study gives a useful benchmark for evacuation simulation of narrow seat aisle, and provides reference to safety design of seat area in train cars.

  12. Thermal comfort of seats as visualized by infrared thermography.

    Science.gov (United States)

    Sales, Rosemary Bom Conselho; Pereira, Romeu Rodrigues; Aguilar, Maria Teresa Paulino; Cardoso, Antônio Valadão

    2017-07-01

    Published studies that deal with the question of how the temperature of chair seats influences human activities are few, but the studies considering such a factor, a function of the type of material, could contribute to improvements in the design of chairs. This study evaluates seat temperatures of 8 types of chairs made of different materials. The parts of the furniture that people come into contact with, and the thermal response of the material to heating and cooling have been evaluated. Infrared thermography was used for this, as it is a non-contact technique that does not present any type of risk in the measurement of temperatures. Seats made of synthetic leather (leatherette), wood and polyester fabric were found to have the highest temperatures, and the plywood seat showed the lowest. The study has also revealed that thermography can contribute to studies of thermal comfort of chair seats in addition to determining the most suitable material. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Children's and Adults' Comfort Experience of Extra Seat Belts When Riding in the Rear Seat of a Passenger Car.

    Science.gov (United States)

    Osvalder, Anna-Lisa; Hansson, Ida; Bohman, Katarina

    2015-01-01

    The objective of this study was to explore passengers' comfort experience of extra seat belts during on-road driving in the rear seat of a passenger car and to investigate how the use of extra belts affects children's and adults' attitudes to the product. Two different seat belt systems were tested, criss-cross (CC) and backpack (BP), consisting of the standard 3-point belt together with an additional 2-point belt. In total, 32 participants (15 children aged 6-10, 6 youths aged 11-15, and 11 adults aged 20-79, who differed considerably in size, shape, and proportions) traveled for one hour with each system, including city traffic and highway driving. Four video cameras monitored the test subject during the drive. Subjective data regarding emotions and perceived discomfort were collected in questionnaires every 20 min. A semistructured interview was held afterwards. All participant groups accepted the new products and especially the increased feeling of safety (P car. CC was appreciated for its symmetry, comfort, and the perceived feeling of safety. Some participants found CC unpleasant because the belts tended to slip close to the neck, described as a strangling feeling. BP was simpler to use and did not cause annoyance to the neck in the way CC did. Instead, it felt asymmetric and to some extent less safe than CC. Body size and shape affected seat belt fit to a great extent, which in turn affected the experience of comfort, both initially and over time. Perceived safety benefit and experienced comfort were the most determinant factors for the attitude toward the extra seat belts. The extra seat belts were perceived as being better than the participants had expected before the test, and they became more used to them over time. This exploratory study provided valuable knowledge from a user perspective for further development of new seat belt systems in cars. In addition to an increased feeling of safety, seat belt fit and comfort are supplementary influencing

  14. MIT-Skywalker: Evaluating comfort of bicycle/saddle seat.

    Science.gov (United States)

    Goncalves, Rogerio S; Hamilton, Taya; Daher, Ali R; Hirai, Hiroaki; Krebs, Hermano I

    2017-07-01

    The MIT-Skywalker is a robotic device developed for the rehabilitation of gait and balance after a neurological injury. This device has been designed based on the concept of a passive walker and provides three distinct training modes: discrete movement, rhythmic movement, and balance training. In this paper, we present our efforts to evaluate the comfort of a bicycle/saddle seat design for the system's novel actuated body weight support device. We employed different bicycle and saddle seats and evaluated comfort using objective and subjective measures. Here we will summarize the results obtained from a study of fifteen healthy subjects and one stroke patient that led to the selection of a saddle seat design for the MIT-Skywalker.

  15. Back Pain in Children

    Directory of Open Access Journals (Sweden)

    Sadi Kayiran ; Sinan Mahir Kayiran;

    2011-02-01

    Full Text Available Contrary to popular knowledge, back pain is quite frequently seen in children. While very rare in the pre-school age group, frequency reaches 30% in the adolescent period. In many cases, the causes of back pain in childhood cannot be exactly determined and the pain disappears by itself in a short time. It should be remembered that back pain that persists for more than two weeks may be associated with organic causes. Whether or not there have been disruptions in neurological functions should be definitely probed in the medical history. Keeping in mind that back pain could be a part of a systemic disease, a systemic examination should be carried out in cases where there has been long-term back pain. The complaint of childhood back pain should be assessed with a thorough history, a careful physical examination and advanced testing tools. [TAF Prev Med Bull 2011; 10(1.000: 115-118

  16. Back Pain and Modic

    DEFF Research Database (Denmark)

    Manniche, Claus; Jordan, Alan; Mikkelsen, Connie

    Long awaited breakthrough Approximately 25 years ago a few researchers managed to publish an article in the renowned medical journal, The Lancet. The article demonstrated that intensive exercise was most useful for patients with chronic back pain. Many of our colleagues found this difficult...... to accept, nonetheless, intensive exercise has for chronic back pain has spread across the world and has become – in different forms – the most commonly prescribed treatment for back pain patients. Since that time, there has not been much research based progress in back science, however, we have taken...... a significant step forward with the advent of the new back pain diagnosis, ”Modic changes”. During the coming years, thousands of back pain patients will now be given a precise diagnosis as well as a useful treatment in cases where we previously we unable to provide either a diagnosis or a useful treatment...

  17. Advanced Infant Car Seat Would Increase Highway Safety

    Science.gov (United States)

    Dabney, Richard; Elrod, Susan

    2004-01-01

    An advanced infant car seat has been proposed to increase highway safety by reducing the incidence of crying, fussy behavior, and other child-related distractions that divert an adult driver s attention from driving. In addition to a conventional infant car seat with safety restraints, the proposed advanced infant car seat would include a number of components and subsystems that would function together as a comprehensive infant-care system that would keep its occupant safe, comfortable, and entertained, and would enable the driver to monitor the baby without having to either stop the car or turn around to face the infant during driving. The system would include a vibrator with bulb switch to operate; the switch would double as a squeeze toy that would make its own specific sound. A music subsystem would include loudspeakers built into the seat plus digital and analog circuitry that would utilize plug-in memory modules to synthesize music or a variety of other sounds. The music subsystem would include a built-in sound generator that could synthesize white noise or a human heartbeat to calm the baby to sleep. A second bulb switch could be used to control the music subsystem and would double as a squeeze toy that would make a distinct sound. An anti-noise sound-suppression system would isolate the baby from potentially disturbing ambient external noises. This subsystem would include small microphones, placed near the baby s ears, to detect ambient noise. The outputs of the microphone would be amplified and fed to the loudspeakers at appropriate amplitude and in a phase opposite that of the detected ambient noise, such that the net ambient sound arriving at the baby s ears would be almost completely cancelled. A video-camera subsystem would enable the driver to monitor the baby visually while continuing to face forward. One or more portable miniature video cameras could be embedded in the side of the infant car seat (see figure) or in a flip-down handle. The outputs of

  18. Child car seats – a habitat for house dust mites and reservoir for harmful allergens

    Directory of Open Access Journals (Sweden)

    David Clarke

    2015-02-01

    Child car seats and driver seats are habitats to a range of mite species which can be present in sufficient concentrations to cause or aggravate allergen related illnesses in individuals who are genetically predisposed.

  19. Evaluation of the League General Insurance Company child safety seat distribution program

    Science.gov (United States)

    1982-05-01

    This report presents an evaluation of the child safety seat distribution initiated by the League General Insurance Company in June 1979. The program provides child safety seats as a benefit under the company's auto insurance policies to policy-holder...

  20. Optimum design of automobile seat using statistical design support system; Tokeiteki sekkei shien system no jidoshayo seat eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Kashiwamura, T [NHK Spring Co. Ltd., Yokohama (Japan); Shiratori, M; Yu, Q; Koda, I [Yokohama National University, Yokohama (Japan)

    1997-10-01

    The authors proposed a new practical optimum design method called statistical design support system, which consists of five steps: the effectivity analysis, reanalysis, evaluation of dispersion, the optimiza4ion and evaluation of structural reliability. In this study, the authors applied the present system to analyze and optimum design of an automobile seat frame subjected to crushing. This study should that the present method could be applied to the complex nonlinear problems such as large deformation, material nonlinearity as well as impact problem. It was shown that the optimum design of the seat frame has been solved easily using the present system. 6 refs., 5 figs., 5 tabs.

  1. Effectiveness of media and enforcement campaigns in increasing seat belt usage rates in a state with a secondary seat belt law.

    Science.gov (United States)

    Vasudevan, Vinod; Nambisan, Shashi S; Singh, Ashok K; Pearl, Traci

    2009-08-01

    In 2005, in terms of seat belt usage rates, Nevada ranked third nationally and first among states with secondary seat belt use enforcement laws in the United States. An effective combination of a media-based education and enforcement campaign helped in this regard. The objective of this article is to document the effectiveness of enforcement and media-based education and outreach campaigns on the seat belt usage rates in Nevada, a state with a secondary seat belt usage law. Observational data on seat belt usage and passenger fatality data are used to evaluate the effectiveness of enforcement campaigns and media-based education and outreach campaigns. Data based on observations of about 40,000 vehicles in each of the years 2003 to 2005 were analyzed. Statistical analyses show that a significant increase in seat belt usage rates among both drivers and passengers for both genders resulted from the accompanying the media and enforcement campaigns. The results from this study indicate that effective and well-planned media/enforcement campaigns can have a significant impact on seat belt usage rates even in a state where the enforcement of seat belt laws can only be as a secondary violation. They validate and expand on findings from other efforts documented in the literature. These results demonstrate that, if coordinated properly, media and enforcement campaigns work very effectively in increasing seat belt usage rates even in states with secondary seat belt laws.

  2. Vehicle seat design : state of the art and recent development

    NARCIS (Netherlands)

    Tan, C.F.; Delbressine, F.L.M.; Rauterberg, G.W.M.; Mokhtar, A.S.; Abdullah, E.J.; Adam, N.M.

    2007-01-01

    Seats are one of the most important components of vehicles and they are the place where professional driver spend most of their time. For example, according to Occupational Outlook Handbook by United State Department of Labor, the truck drivers frequently work 50 or more hours a week. The truck

  3. 49 CFR 392.16 - Use of seat belts.

    Science.gov (United States)

    2010-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS DRIVING OF COMMERCIAL MOTOR VEHICLES Driving of Commercial Motor Vehicles § 392.16 Use of seat belts. A commercial motor vehicle which...

  4. Design Optimisation and Conrol of a Pilot Operated Seat Valve

    DEFF Research Database (Denmark)

    Nielsen, Brian; Andersen, Torben Ole; Hansen, Michael Rygaard

    2004-01-01

    The paper gives an approach for optimisation of the bandwidth of a pilot operated seat valve for mobile applications. Physical dimensions as well as parameters of the implemented control loop are optimised simultaneously. The frequency response of the valve varies as a function of the pressure drop...

  5. Adaptive magnetorheological seat suspension for the expeditionary fighting vehicle

    International Nuclear Information System (INIS)

    Hiemenz, G J; Hu, W; Wereley, N M

    2009-01-01

    The Expeditionary Fighting Vehicle (EFV) is an amphibious vehicle designed to operate through harsh conditions and at much higher speeds than its predecessors. These unique capabilities and broadly varying operational conditions lead to a complex design and human factors scenario for the forward seating positions that cannot be solved using conventional passive seat suspension systems. Injurious shock loads transmitted to the occupants when traversing over water in high sea states and/or at high speeds, as well as harmful shock and vibration transmitted to the occupants when the vehicle is travelling over land, pose a threat to occupant health and significantly limit mission duration. In this study, a semi-active magnetorheological (MR) seat suspension is developed which adapts to broadly varying operational conditions, as well as occupant weight, to provide optimal protection of EFV occupants. It is shown that this MR seat suspension system will reduce the shock and vibration transmitted to the occupant by up to 33% and 65%, respectively, as compared to the existing passive suspension.

  6. Adaptive magnetorheological seat suspension for the expeditionary fighting vehicle

    Energy Technology Data Exchange (ETDEWEB)

    Hiemenz, G J [Techno-Sciences, Inc., 11750 Beltsville Dr. Ste. 300, Beltsville, MD 20705 (United States); Hu, W; Wereley, N M [Aerospace Engineering, University of Maryland, College Park, MD 20712 (United States)], E-mail: greg@technosci.com, E-mail: wereley@umd.edu

    2009-02-01

    The Expeditionary Fighting Vehicle (EFV) is an amphibious vehicle designed to operate through harsh conditions and at much higher speeds than its predecessors. These unique capabilities and broadly varying operational conditions lead to a complex design and human factors scenario for the forward seating positions that cannot be solved using conventional passive seat suspension systems. Injurious shock loads transmitted to the occupants when traversing over water in high sea states and/or at high speeds, as well as harmful shock and vibration transmitted to the occupants when the vehicle is travelling over land, pose a threat to occupant health and significantly limit mission duration. In this study, a semi-active magnetorheological (MR) seat suspension is developed which adapts to broadly varying operational conditions, as well as occupant weight, to provide optimal protection of EFV occupants. It is shown that this MR seat suspension system will reduce the shock and vibration transmitted to the occupant by up to 33% and 65%, respectively, as compared to the existing passive suspension.

  7. Knowledge, attitude and use of seat belt among commercial drivers ...

    African Journals Online (AJOL)

    The effectiveness of seat belt usage in reducing the severity of the sequelae of road traffic accidents is widely known. ... Each correct response to the knowledge questions was scored one mark and wrong response or non-response was ...

  8. Classroom Management: Seating Solutions [and] Hooray for Volunteers.

    Science.gov (United States)

    Novelli, Joan; Edgar, Susan

    1997-01-01

    Two articles present suggestions for enhancing classroom management in creative ways. The first article describes how to use flexible seating arrangements to encourage cooperation, friendship, and community. The second article discusses how to encourage and work with classroom volunteers from the community. (SM)

  9. Experimental verification of numerical calculations of railway passenger seats

    Science.gov (United States)

    Ligaj, B.; Wirwicki, M.; Karolewska, K.; Jasińska, A.

    2018-04-01

    The construction of railway seats is based on industry regulations and the requirements of end users, i.e. passengers. The two main documents in this context are the UIC 566 (3rd Edition, dated 7 January 1994) and the EN 12663-1: 2010+A1:2014. The study was to carry out static load tests of passenger seat frames. The paper presents the construction of the test bench and the results of experimental and numerical studies of passenger seat rail frames. The test bench consists of a frame, a transverse beam, two electric cylinders with a force value of 6 kN, and a strain gauge amplifier. It has a modular structure that allows for its expansion depending on the structure of the seats. Comparing experimental results with numerical results for points A and B allowed to determine the existing differences. It follows from it that higher stress values are obtained by numerical calculations in the range of 0.2 MPa to 35.9 MPa.

  10. Designing Train Passenger Seat by Kansei Engineering in Indonesia

    Directory of Open Access Journals (Sweden)

    Hapsari Sakya Nabila

    2017-01-01

    Full Text Available Public transport adoption is still major problem in Indonesia. Integrating impression and emotion to service may change the image of public transport, leading to fast adoption rate. As product development technique, Kansei Engineering is well known to facilitate that integration. This paper communicates the implementation of Kansei Engineering (KE in designing train passenger seat in Indonesia. The train between Bandung-Solo (8 hours journey was chosen to be the investigated object. The train was selected to be refurbished by introducing a new passenger seat design, emphasizing on the improvement of passenger experience. As the first step of KE type I technique, travel experience of the existing passengers were taken into the consideration for selecting Kansei words. It was found that the relevant Kansei words to design passenger train seat in Indonesia were: comfort, people-friendly, multifunction, safe, soft, spacious, relaxing, superior, maintainable, strong, producible, minimalist, attractive, modern, unique, and durable. Upon understanding the semantic meaning of those words, physical properties and technical specification were produced by consulting to the related members. Finally, a passenger seat with synthetic leather cover, modular design, foldable table, individual power point, bluesilver color, and adjusted to Indonesian’s anthropometry data was proposed as the final design

  11. The use of seat belts and contributing factors : an international comparison.

    NARCIS (Netherlands)

    Mäkinen, T. Wittink, R.D. & Hagenzieker, M.P.

    1991-01-01

    The purpose of this study was to define factors that contribute to the use or non-use of seat belts. Legislation prescribing compulsory seat belt usage is one of the most important factors. Promotion of the use of seat belts without this legislation is very difficult and time-consuming. So far, the

  12. Knowledge, attitude and use of seat belt among commercial drivers in Sokoto Metropolis

    Directory of Open Access Journals (Sweden)

    A O Abiola

    2010-01-01

    Conclusion: This study has identified high level of knowledge, positive attitude and reported use of seat belt. It is recommended that public awareness of the safety benefits of seat belts and strong enforcement are necessary to achieve optimal use of seat belt.

  13. 76 FR 23793 - Extension of Application Period for Seats for the Stellwagen Bank National Marine Sanctuary...

    Science.gov (United States)

    2011-04-28

    ... Period for Seats for the Stellwagen Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric... seats on the Stellwagen Bank National Marine Sanctuary Advisory Council: (1) Research Member seat and (2...

  14. 49 CFR 571.210 - Standard No. 210; Seat belt assembly anchorages.

    Science.gov (United States)

    2010-10-01

    ... bolt holes or the centroid of any other means of attachment to the structure specified in 4.1.3.1... are either: (a) For designated seating positions that are common to the same occupant seat and that... common to the same occupant seat, but that face in the same direction, if the vertical centerline of the...

  15. Fall Back Equilibrium

    NARCIS (Netherlands)

    Kleppe, J.; Borm, P.E.M.; Hendrickx, R.L.P.

    2008-01-01

    Fall back equilibrium is a refinement of the Nash equilibrium concept. In the underly- ing thought experiment each player faces the possibility that, after all players decided on their action, his chosen action turns out to be blocked. Therefore, each player has to decide beforehand on a back-up

  16. Push-Back Leadership.

    Science.gov (United States)

    Tetenbaum, Toby J.; Tetenbaum, Hilary

    2003-01-01

    Describes push-back leadership, a model of leadership based on the work of Ronald Heifetz and Martin Linksky. Argues that the two key roles of the leader are to give the work back to people and to keep them within a healthy range of disequilibrium that generates creativity and innovation to solve organizational problems. (Author/LRW)

  17. The Sit & Stand chair. A revolutionary advance in adaptive seating systems.

    Science.gov (United States)

    Galumbeck, Michael H; Buschbacher, Ralph M; Wilder, Robert P; Winters, Kathryne L; Hudson, Mary Anne; Edlich, Richard F

    2004-01-01

    allows elevation of the back portion of the seat. The design of this chair ensured that there were no pinch points that could endanger the user or assistant. Its framework ensured that it was stable and did not tip over. After the prototype chair is manufactured, it is being sent to Underwriters Laboratory Inc. (Los Angeles, California) for review and certification. The performance of the SIT & STAND chair was determined in a clinical study involving seven elderly or disabled individuals who complained of difficulty in rising from a chair from a seated position. During each performance evaluation, a mechanical chest and shoulder harness attached to an overhead sling encircled the individual to ensure that he/she would not fall. In the first part of the evaluation, these individuals were asked to achieve a standing position after being seated in the SIT & STAND chair without the use of the actuator. Three individuals were unable to achieve a standing position, while four achieved this standing position with considerable difficulty and potential instability. When these participants used the SIT & STAND chair with the use of the electrical actuator, all individuals achieved a standing position without difficulty or instability. All individuals expressed disappointment that the SIT & STAND chair was not commercially available for them to purchase and use in their homes. Because the SIT & STAND chair allows the individual to achieve a standing position without assistance, the SIT & STAND chair has other potential benefits not evaluated in this study. The beneficial effects of standing have been documented by comprehensive scientific studies. These benefits include reduction of seating pressure, decreased bone demineralization, increased bladder pressure, enhanced circulatory regulation, reduction in muscular tone, decrease in upper extremity muscle stress, and participation in activities of daily living. Another irrefutable benefit of the SIT & STAND chair is that the chair

  18. Low back pain

    DEFF Research Database (Denmark)

    Buchbinder, Rachelle; van Tulder, Maurits; Öberg, Birgitta

    2018-01-01

    Low back pain is the leading worldwide cause of years lost to disability and its burden is growing alongside the increasing and ageing population.1 Because these population shifts are more rapid in low-income and middle-income countries, where adequate resources to address the problem might...... not exist, the effects will probably be more extreme in these regions. Most low back pain is unrelated to specific identifiable spinal abnormalities, and our Viewpoint, the third paper in this Lancet Series,2,3 is a call for action on this global problem of low back pain....

  19. ANTHROPOMETRIC CHARACTERISTICS OF FLIGHT PERSONNEL FOR DESIGNING DAMPERS FOR SHOCKPROOF SEATS OF HELICOPTER CREWS.

    Science.gov (United States)

    Moiseev, Yu B; Ignatovich, S N; Strakhov, A Yu

    The article discusses anthropometric design of shockproof pilot seats for state-of-the-art helicopters. Object of the investigation was anthropometric parameters of the helicopter aviation personnel of the Russian interior troops. It was stated that the body parameters essential for designing helicopter seat dampers are mass of the body part that presses against the seat in the seating position, and eye level above the seat surface. An uncontrolled seat damper ensuring shockproof safety to 95 % helicopter crews must be designed for the body mass contacting the seat of 99.7 kg and eye level above the seat of 78.6 cm. To absorb.shock effectively, future dampers should be adjustable to pilot's body parameters. The optimal approach to anthropometric design of a helicopter seat is development of type pilot' body models with due account of pilot's the flight outfit and seat geometry. Principle criteria of type models are body mass and eye level. The authors propose a system of type body models facilitating specification of anthropometric data helicopter seat developers.

  20. specific low back pain

    African Journals Online (AJOL)

    2015-09-01

    Sep 1, 2015 ... SPECIFIC LOW BACK PAIN: IMPLICATION FOR DIRECT HEALTH. CARE COST ... abundant evidence suggesting the benefits of therapeu- tic exercise on pain and ... Exercise and behavioural therapies in chronic pain. 174.

  1. Squeezed fermions and back-to-back correlations

    International Nuclear Information System (INIS)

    Panda, P.K.; Krein, G.; Padula, S.S.; Csoergoe, T.; Hama, Y.

    2001-01-01

    Back-to-back correlations of asymptotic fermion pairs appear if in-medium interactions lead to mass modifications of fermion states in a thermalized medium. The back-to-back correlations of protons and anti-protons will be experimentally observable in ultrarelativistic heavy ion collisions. The strength of back-to-back correlations of fermions can be unlimitedly large, diverging as the momentum of the pair increases and the net baryon density decreases. (author)

  2. Squeezed fermions and back-to-back correlations

    Energy Technology Data Exchange (ETDEWEB)

    Panda, P.K.; Krein, G.; Padula, S.S. [Instituto de Fisica Teorica (IFT), Sao Paulo, SP (Brazil); Csoergoe, T. [Hungarian Academy of Sciences, Budapest (Hungary). Research Institute for Particle and Nuclear Physics (RMKI, KFKI); Hama, Y. [Sao Paulo Univ., SP (Brazil). Inst. de Fisica

    2001-07-01

    Back-to-back correlations of asymptotic fermion pairs appear if in-medium interactions lead to mass modifications of fermion states in a thermalized medium. The back-to-back correlations of protons and anti-protons will be experimentally observable in ultrarelativistic heavy ion collisions. The strength of back-to-back correlations of fermions can be unlimitedly large, diverging as the momentum of the pair increases and the net baryon density decreases. (author)

  3. The transmission of vertical vibration through seats: Influence of the characteristics of the human body

    Science.gov (United States)

    Toward, Martin G. R.; Griffin, Michael J.

    2011-12-01

    The transmission of vibration through a seat depends on the impedance of the seat and the apparent mass of the seat occupant. This study was designed to determine how factors affecting the apparent mass of the body (age, gender, physical characteristics, backrest contact, and magnitude of vibration) affect seat transmissibility. The transmission of vertical vibration through a car seat was measured with 80 adults (41 males and 39 females aged 18-65) at frequencies between 0.6 and 20 Hz with two backrest conditions (no backrest and backrest), and with three magnitudes of random vibration (0.5, 1.0, and 1.5 m s -2 rms). Linear regression models were used to study the effects of subject physical characteristics (age, gender, and anthropometry) and features of their apparent mass (resonance frequency, apparent mass at resonance and at 12 Hz) on the measured seat transmissibility. The strongest predictor of both the frequency of the principal resonance in seat transmissibility and the seat transmissibility at resonance was subject age, with other factors having only marginal effects. The transmissibility of the seat at 12 Hz depended on subject age, body mass index, and gender. Although subject weight was strongly associated with apparent mass, weight was not strongly associated with seat transmissibility. The resonance frequency of the seat decreased with increases in the magnitude of the vibration excitation and increased when subjects made contact with the backrest. Inter-subject variability in the resonance frequency and transmissibility at resonance was less with greater vibration excitation, but was largely unaffected by backrest contact. A lumped parameter seat-person model showed that changes in seat transmissibility with age can be predicted from changes in apparent mass with age, and that the dynamic stiffness of the seat appeared to increase with increased loading so as to compensate for increases in subject apparent mass associated with increased sitting

  4. Analysis of Ejection Seat Stability Using Easy Program. Volume I.

    Science.gov (United States)

    1980-09-01

    BODY AXiS FURCE COMPONENT. L ACTING ON THE AiRPLANc FROM THE CATAPULT (Ld) C ILA1(3) - PORT ONE X,Y,L AIRPLANE BODY AXIS TORQUE COMPONENTS C ACrINu...THE AIRPLANE (FT) C EAPI3) - EARTH TO AIRPLANc . EULER ANGLES (DEG) C SKPt3) - XtYZ EARTh POSITIGN VECTOR OF THE SEAT REFERENCE L POINT (FT) f- LST(3

  5. Analysis of Transportation Alternatives for Ejection Seat Training

    OpenAIRE

    Gambel, Ray; Lundy, David; Murphy, William; Southmost Consulting

    2011-01-01

    EMBA Project Report EXECUTIVE SUMMARY Student Military Aviators who complete primary flight training at Training Wing FOUR and select jets for their advanced training track will require Naval Aviation Survival Training Program (NASTP) Class 1 training until the T-6B replaces the T-34C as the primary flight training aircraft. This Class 1 training instructs students in ejection seat equipment and procedures for emergency egress of their new aircraft. Of the eight available Aviation Survi...

  6. A social media program to increase adolescent seat belt use.

    Science.gov (United States)

    Drake, Stacy A; Zhang, Ni; Applewhite, Courtney; Fowler, Katherine; Holcomb, John B

    2017-09-01

    In response to motor vehicle crashes remaining the leading cause of death for teenagers in the United States, a nursing clinical group (n = 10) in conjunction with a local hospital injury prevention program created an educational campaign to bolster seat belt use. The nursing students created an Instagram account to serve as an educational tool to promote seat belt use among teenagers aged 14-19, and the program was presented at three high school health fairs. In all, 135 postings were made to the account over a 3-month period. The number of likes posted by high school students was the unit of analysis. The most significant result (p = .01) was the difference between postings most liked (celebrities wearing seat belts) and least liked (postings made at the high school health fair), otherwise, differences among postings liked (humor postings, response requests, pictures of celebrities, factual data) were not significant. Instagram user engagement, measured in number of likes, is indicative that social media provides platforms to promote injury prevention efforts. Further research is needed to identify measurable elements of social media and to follow-up on behavioral changes following participation. © 2017 Wiley Periodicals, Inc.

  7. Assessing ergonomic risks of software: Development of the SEAT.

    Science.gov (United States)

    Peres, S Camille; Mehta, Ranjana K; Ritchey, Paul

    2017-03-01

    Software utilizing interaction designs that require extensive dragging or clicking of icons may increase users' risks for upper extremity cumulative trauma disorders. The purpose of this research is to develop a Self-report Ergonomic Assessment Tool (SEAT) for assessing the risks of software interaction designs and facilitate mitigation of those risks. A 28-item self-report measure was developed by combining and modifying items from existing industrial ergonomic tools. Data were collected from 166 participants after they completed four different tasks that varied by method of input (touch or keyboard and mouse) and type of task (selecting or typing). Principal component analysis found distinct factors associated with stress (i.e., demands) and strain (i.e., response). Repeated measures analyses of variance showed that participants could discriminate the different strain induced by the input methods and tasks. However, participants' ability to discriminate between the stressors associated with that strain was mixed. Further validation of the SEAT is necessary but these results indicate that the SEAT may be a viable method of assessing ergonomics risks presented by software design. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Machine for development impact tests in sports seats and similar

    International Nuclear Information System (INIS)

    Gonçalves, R M

    2015-01-01

    This paper describes the stages of development of a machine to perform impact tests in sport seats, seats for spectators and multiple seats. This includes reviews and recommendations for testing laboratories that have needs similar to the laboratory where unfolded this process.The machine was originally developed seeking to meet certain impact tests in accordance with the NBR15925 standards; 15878 and 16031. The process initially included the study of the rules and the election of the tests for which the machine could be developed and yet all reports and outcome of interaction with service providers and raw materials.For operating facility, it was necessary to set entirely the machine control, which included the concept of dialogue with operator, the design of the menu screens and the procedures for submission and registration of results. To ensure reliability in the process, the machine has been successfully calibrated according to the requirements of the Brazilian network of calibration.The criticism to this enterprise covers the technical and economic aspects involved and points out the main obstacles that were needed to overcome. (paper)

  9. Affirmative Action: Reservation Seats untuk Perempuan di Parlemen India

    Directory of Open Access Journals (Sweden)

    Evi Yunita Kurniaty

    2015-12-01

    Full Text Available The study aims to help us understand and analyze women's efforts in the policy-making process to increase their political participation in the constitutional and electoral processes. We can also see the extent to which the values rooted in the patriarchal culture in a society and what can be done and reduce them. Affirmative action is carried out in India by applying the system of reservation seats for women in the Indian Parliament. This is done in India is proven to increase the number of women in the Indian Parliament. By the way there are quotas for women as a strategy for accessing the political arena has growing support among MPs. In this study, Indonesia could get a reservation seats of learning about the system is done. To increase the representation in the "area" is very difficult to be touched by a quota system which is run now, it can be done with reservation seats quota to ensure women's representation in parliament.

  10. Effective seat-to-head transmissibility in whole-body vibration: Effects of posture and arm position

    Science.gov (United States)

    Rahmatalla, Salam; DeShaw, Jonathan

    2011-12-01

    Seat-to-head transmissibility is a biomechanical measure that has been widely used for many decades to evaluate seat dynamics and human response to vibration. Traditionally, transmissibility has been used to correlate single-input or multiple-input with single-output motion; it has not been effectively used for multiple-input and multiple-output scenarios due to the complexity of dealing with the coupled motions caused by the cross-axis effect. This work presents a novel approach to use transmissibility effectively for single- and multiple-input and multiple-output whole-body vibrations. In this regard, the full transmissibility matrix is transformed into a single graph, such as those for single-input and single-output motions. Singular value decomposition and maximum distortion energy theory were used to achieve the latter goal. Seat-to-head transmissibility matrices for single-input/multiple-output in the fore-aft direction, single-input/multiple-output in the vertical direction, and multiple-input/multiple-output directions are investigated in this work. A total of ten subjects participated in this study. Discrete frequencies of 0.5-16 Hz were used for the fore-aft direction using supported and unsupported back postures. Random ride files from a dozer machine were used for the vertical and multiple-axis scenarios considering two arm postures: using the armrests or grasping the steering wheel. For single-input/multiple-output, the results showed that the proposed method was very effective in showing the frequencies where the transmissibility is mostly sensitive for the two sitting postures and two arm positions. For multiple-input/multiple-output, the results showed that the proposed effective transmissibility indicated higher values for the armrest-supported posture than for the steering-wheel-supported posture.

  11. Validation of seat-off and seat-on in repeated sit-to-stand movements using a single-body-fixed sensor

    International Nuclear Information System (INIS)

    Van Lummel, R C; Ainsworth, E; Hausdorff, J M; Lindemann, U; Beek, P J; Van Dieën, J H

    2012-01-01

    The identification of chair rise phases is a prerequisite for quantifying sit-to-stand movements. The aim of this study is to validate seat-off and seat-on detection using a single-body-fixed sensor against detection based on chair switches. A single sensor system with three accelerometers and three gyroscopes was fixed around the waist. Synchronized on–off switches were placed under the chair. Thirteen older adults were recruited from a residential care home and fifteen young adults were recruited among college students. Subjects were asked to complete two sets of five trials each. Six features of the trunk movement during seat-off and seat-on were calculated automatically, and a model was developed to predict the moment of seat-off and seat-on transitions. The predictions were validated with leave-one-out cross-validation. Feature extraction failed in two trials (0.7%). For the optimal combination of seat-off predictors, cross-validation yielded a mean error of 0 ms and a mean absolute error of 51 ms. For the best seat-on predictor, cross-validation yielded a mean error of –3 ms and a mean absolute error of 127 ms. The results of this study demonstrate that seat-off and seat-on in repeated sit-to-stand movements can be detected semi-automatically in young and older adults using a one-body-fixed sensor system with an accuracy of 51 and 127 ms, respectively. The use of the ambulatory instrumentation is feasible for non-technically trained personnel. This is an important step in the development of an automated method for the quantification of sit-to-stand movements in clinical practice. (paper)

  12. Acknowledging the back patient

    DEFF Research Database (Denmark)

    Damsgaard, Janne Brammer; Bastrup Jørgensen, Lene; Norlyk, Annelise

    , Silkeborg Regional Hospital, Regional Hospital Central Jutland, Silkeborg, Denmark 2. Health, Section for Nursing, Aarhus University, Aarhus, Denmark 3. University of Southern Denmark & Vejle Sygehus, Vejle, Denmark keywords:Back Patient, Narrative, Biomedical, Marginalisation, Self-Identity, Ethical......#296 Acknowledging The Back Patient. A Thematic Synthesis Of Qualitative Research. A Systematic Literature Review. Janne Brammer Damsgaard1, Lene Bastrup Jørgensen1, Annelise Norlyk2, Regner Birkelund3 1. Health, Section for Nursing, Aarhus University & Research Unit, Elective Surgery Centre....... Therefore, telling about experiences and perceptions is important for back patients in order to feel accepted and acknowledged. But selfhood cannot be reduced to narrative identity since the identity of the self is only fully revealed the moment we include the ethical dimension including certain norms...

  13. Bone regeneration by gelatin hydro-gel seat containing BMP-2 and its application to canine orbital floor fracture Model

    International Nuclear Information System (INIS)

    Mochizuki, Yuichi

    2007-01-01

    Reported are preparation of the gel seat in the title (GHG) for sustained release of BMP-2 (bone morphogenetic protein-2) and its application to the fracture model of orbital floor of the dog. The chemically linked GHG was prepared from gelatin and glutaraldehyde and lyophilized. BMP-2 solution was dropped on the GHG seat to be contained there. To see the biobehavior of BMP-2 and GHG, they were labeled with 125 I and were given subcutaneously in the back of nude mice, of which remaining radioactivity was periodically measured by Aloka ARC-310B gamma counter. This experiment revealed the sustained release of BMP-2 along with degradation of the GHG. Then a complex of the GHG and bio-degradable polymer (L-lactide-ε-caprolactone) was prepared and implanted to the artificially fractured region (10 x 10 mm) of dog orbit floor, of which recovering process was evaluated by analysis of bone structure with soft X-ray (SOFRON, TRS-1005) roentgenography, histology, and micro-CT imaging (Comscantecno's Scan Xmate-A090S) for trabecular bone volume, thickness, number and separation. This experiment revealed that new bone was effectively induced to regenerate on the complex, of which structure was found similar to the normal trabecula. Thus in future, the complex can be useful for ideal treatment of the orbit floor fracture without necessity of donor. (R.T.)

  14. Multi-leg Seat Inventory Control Based on EMSU and Virtual Bucket

    Directory of Open Access Journals (Sweden)

    Wei Fan

    2014-01-01

    Full Text Available Expected marginal seat revenue (EMSR is a well-known method for airline seat inventory control airlines. However, this method employs a static model to study the dynamic reservation process, and does not take into account the risk tolerance of policy makers. Expected marginal seat utility (EMSU replaces revenue by utility, which addresses the real situation of seat inventory control. However, there is still a lack of multi-leg seat control algorithms based on EMSU. Therefore, using EMSU and bucket algorithms, this paper applies the Markov decision-making process to simulate the flight reservation process and builds a dynamic multi-leg seat inventory control model. Experimental results validate the effectiveness of the proposed method.

  15. specific low back pain

    African Journals Online (AJOL)

    2015-09-01

    Sep 1, 2015 ... 2Department of Medicine, School of Medicine and Dentistry, University of Ghana. ... ly, 10% to 20% of patients with low back pain develop ... directly because of illness which are not health care ... activity as regards the treatment outcomes of chronic .... maximal training at 70-80% maximum heart rate).

  16. Back to Work

    Science.gov (United States)

    Fernandez, Kim

    2010-01-01

    The economic downturn hit working America particularly hard, as agricultural, automotive, manufacturing, and retail jobs in many corners of the country all but evaporated. Consumers continue to cut back, and jobless rates in many states have eclipsed levels not seen in decades. Out of work and under pressure, many Americans are turning to the…

  17. Back Pain - Multiple Languages

    Science.gov (United States)

    ... List of All Topics All Back Pain - Multiple Languages To use the sharing features on this page, please enable JavaScript. Arabic (العربية) ... Bethesda, MD 20894 U.S. Department of Health and Human Services National Institutes of Health Page last updated on 31 May 2018

  18. Acknowledging the back patient

    DEFF Research Database (Denmark)

    Damsgaard, Janne Brammer; Bastrup, Lene; Norlyk, Annelise

    and reluctant to speak out. Therefore, telling about experiences and perceptions is important for back patients in order to feel accepted and acknowledged. The health professionals must incorporate the patients’ narratives as an integral part of the care and treatment. Conclusions: In order to acknowledge...

  19. [Use of seat belts and mobile phone while driving in Florence: trend from 2005 to 2009].

    Science.gov (United States)

    Lorini, Chiara; Pellegrino, Elettra; Mannocci, Federico; Allodi, Guendalina; Indiani, Laura; Mersi, Anna; Petrioli, Giuseppe; Santini, Maria Grazia; Garofalo, Giorgio; Bonaccorsi, Guglielmo

    2012-01-01

    to evaluate the trend over time of the use of seat belts by drivers and passengers of cars and vans and the use of hand held mobile phone while driving in Florence from 2005 to 2009. DESIGN, SETTING AND PARTICIPANTS AND MAIN OUTCOME MEASURES: direct observations (58,773 vehicles) have been conducted to detect the use of seat belts by occupants of cars and vans, and the use of mobile phone while driving. It has been carried out correlation analysis between the use of the seat belt by occupants of vehicles and between the simultaneous use of this device and mobile phone while driving.Moreover, it has been carried out time series analysis (ARIMA Box Jenkins) of in the prevalence of the use of seat belts by occupants of vehicles observed, of mobile phone by drivers and the trend of the risk to drive using the mobile phone with unfastened seat belt rather than to drive using the mobile phone with fastened seat belt. seat belts were used on average by 75.7% of drivers, 75.5% of front passengers and 25.1% of rear passengers. The average mobile phone use while driving was 4.5%. Drivers most frequently fasten seat belt if front passengers use it and while they do not use mobile phone. The use of seat belts by drivers and front passengers has not changed over time, whereas the use of mobile phone while driving has significantly increased. The prevalence of using mobile phone with unfastened seat belt rather than to use it with fastened seat belt while driving has significantly decreased over the years, indicating an increase in the use of mobile phone, especially among those who fasten the seat belt. it is necessary to plan and realize stronger interventions in the whole area.

  20. Race, belief in destiny, and seat belt usage: a pilot study.

    Science.gov (United States)

    Colón, I

    1992-01-01

    A survey of 1063 individuals found that when belief in destiny was statistically controlled, differences in seat belt use by race disappeared. Thus, racial differences in seat belt use are statistically accounted for and might be explained by belief in destiny. Efforts to increase seat belt use should target minority groups rather than include them in broadbrush programs. Further, these efforts should take into account this important difference in motivation. PMID:1585969

  1. Assessment of the vibration on the foam legged and sheet metal-legged passenger seat

    Directory of Open Access Journals (Sweden)

    L. Dahil

    2015-10-01

    Full Text Available In this study, it was aim ed to decrease the vibration reaching to passenger from the legs of vehicle seats. In order to determine the levels of vibrations reaching at passengers, a test pad placed under the passenger seat was used, and HVM100 device was used for digitizing the information obtained. By transferring the vibration data to system by using HVM100 device, the acceleration graphics were prepared with Blaze software. As a result, it was determined that the acceleration values of seat legs made of foam material were lower than that of seat legs made of 2 mm thick sheet metal, so they damped the vibration better.

  2. Development of Methodology to Gather Seated Anthropometry Data in a Microgravity Environment

    Science.gov (United States)

    Rajulu, Sudhakar; Young, Karen; Mesloh, Miranda

    2010-01-01

    The Constellation Program is designing a new vehicle based off of new anthropometric requirements. These requirements specify the need to account for a spinal elongation factor for anthropometric measurements involving the spine, such as eye height and seated height. However, to date there is no data relating spinal elongation to a seated posture. Only data relating spinal elongation to stature has been collected in microgravity. Therefore, it was proposed to collect seated height in microgravity to provide the Constellation designers appropriate data for their analyses. This document will describe the process in which the best method to collect seated height in microgravity was developed.

  3. Resection of deep-seated brain glioma by microsurgery assisted with neuronavigation

    International Nuclear Information System (INIS)

    Feng Ming; Zhou Youxin; Sun Chunming; Zhang Shiming

    2009-01-01

    Objective: To investigate the clinical value of neuronavigator assisted microsurgery for deep-seated brain glioma. Methods: The electromagnetic neuronavigation system had been applied for microsurgery of deep-seated brain glioma in fifteen cases. Results: Ten from 15 patients were totally removed, 2 were subtotally removed and 3 were partial removed.All patients had no new neurological deficit. Conclusion: The neuronavigator assisted microsurgery for deep-seated brain glioma is of characters including accurate location, minimal invasiveness, and can enhance the rate of total resection and decrease the operative complications in the patients with deep-seated brain glioma. (authors)

  4. Car safety seat usage and selection among families attending University Hospital Limerick

    LENUS (Irish Health Repository)

    Scully, P

    2016-05-01

    The safest way for children to travel within a car is by provision of a weight-appropriate safety-seat. To investigate this, we conducted a cross-sectional study of adult parents who had children under 12 years, and collected information related to: car use, safety-seat legislation, and type of safety-seat employed. Data were reviewed on 120 children from 60 respondents. Ninety-eight (81.7%) children were transported daily by car. Forty-eight (81.4%) respondents were aware that current safety-seat legislation is based on the weight of the child. One hundred and seven (89.9%) children were restrained during travel using a car safety-seat. One hundred and two (96.2%) safety seats were newly purchased, installed in 82.3% (88) cases by family members with installation instructions fully read in 58 (55.2%) cases. Ninety-nine (83.2%) children were restrained using an appropriate safety-seat for their weight. The results show that four out of five families are employing the most appropriate safety-seat for their child, so providing an effective mechanism to reduce car-related injury. However, the majority of safety-seats are installed by family members, which may have child safety consequences.

  5. Effects of Wheelchair Seat-height Settings on Alternating Lower Limb Propulsion With Both Legs.

    Science.gov (United States)

    Murata, Tomoyuki; Asami, Toyoko; Matsuo, Kiyomi; Kubo, Atsuko; Okigawa, Etsumi

    2014-01-01

    This study investigated the effects of seat-height settings of wheelchairs with alternating propulsion with both legs. Seven healthy individuals with no orthopedic disease participated. Flexion angles at initial contact (FA-IC) of each joint, range of motion during propulsion period (ROM-PP), and ground reaction force (GRF) were measured using a three dimensional motion capture system and force plates, and compared with different seat-height settings. Statistically significant relationships were found between seat-height and speed, stride length, knee FA-IC, ankle FA-IC, hip ROM-PP, vertical ground reaction force (VGRF), and anterior posterior ground reaction force (APGRF). Speed, hip ROM-PP, VGRF and APGRF increased as the seat-height was lowered. This effect diminished when the seat-height was set below -40 mm. VGRF increased as the seat-height was lowered. The results suggest that the seat-height effect can be attributed to hip ROM-PP; therefore, optimal foot propulsion cannot be achieved when the seat height is set either too high or too low. Efficient foot propulsion of the wheelchair can be achieved by setting the seat height to lower leg length according to a combination of physical characteristics, such as the user's physical functions, leg muscles, and range of motion.

  6. 75 FR 39656 - Availability of Seats for the Florida Keys National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2010-07-12

    ... (alternate), Research and Monitoring (member), Research and Monitoring (alternate), South Florida Ecosystem... seat for which they are applying; community and professional affiliations; philosophy regarding the...

  7. Airflow Characteristics at the Breathing Zone of a Seated Person

    DEFF Research Database (Denmark)

    Melikov, Arsen Krikor; Bolashikov, Zhecho Dimitrov; Nagano, Hideaki

    2011-01-01

    A method for active control over the interaction between the free convection flow around occupant‘s body and locally applied airflow from front on the velocity field at the breathing zone of a seated person was studied. A workplace equipped with personalised ventilation (PV) generating flow from......) was installed below the table board, above the thighs of the manikin, and was used to exhaust the air of the free convection flow coming from the lower body parts of the manikin. The velocity field at the breathing zone was measured with Particle Image Velocimetry consisting of a dual cavity laser and two CCD...

  8. Seat pressure measurement technologies: considerations for their evaluation.

    Science.gov (United States)

    Gyi, D E; Porter, J M; Robertson, N K

    1998-04-01

    Interface pressure measurement has generated interest in the automotive industry as a technique which could be used in the prediction of driver discomfort for various car seat designs, and provide designers and manufacturers with rapid information early on in the design process. It is therefore essential that the data obtained are of the highest quality, relevant and have some quantitative meaning. Exploratory experimental work carried out with the commercially available Talley Pressure Monitor is outlined. This led to a better understanding of the strengths and weaknesses of this system and the re-design of the sensor matrix. Such evaluation, in the context of the actual experimental environment, is considered essential.

  9. Affirmative Action: Reservation Seats untuk Perempuan di Parlemen India

    OpenAIRE

    Evi Yunita Kurniaty

    2015-01-01

    The study aims to help us understand and analyze women's efforts in the policy-making process to increase their political participation in the constitutional and electoral processes. We can also see the extent to which the values rooted in the patriarchal culture in a society and what can be done and reduce them. Affirmative action is carried out in India by applying the system of reservation seats for women in the Indian Parliament. This is done in India is proven to increase the number of w...

  10. Review the Proportion of university seats with body dimensions of students at the School of Public Health of Qazvin University of Medical Sciences in 1388

    Directory of Open Access Journals (Sweden)

    A. Safaryvaryani

    2011-12-01

    Full Text Available Background and aims   Educating of students that have the ability to solve society problems, is considered as the most important task of universities. This important issue is achieved through effective education in a safe and stress free environment. Proper design of classroom seats proportional to anthropometric characteristics of students not only can improve academic quality but also prevent musculoskeletal disorders. In addition it may encourage students to practice correct sitting habits. This study was conducted to check the correlation of physical dimensions of students and prevalence of musculoskeletal disorder with educational chair dimensions that provided by companies.   Methods   This descriptive - analytical study was performed on 115 students of 18 to 27 years. 15 anthropometric parameters correlated with sitting on the chair were measured by anthropometry page and anthropometric caliper gauge. Dimensions of two Types of seats provided in the classrooms were compared with the standard seat dimensions.   Results   comparison of dimensions confirmed that seat dimension and students dimensions correspond with one another only in elbow length parameter and other parameters were not correspondent with each other. T-Test showed that there are significant  differences between girl and boy parameters.  conclusion   Comparison of the results of measurement of  physical dimensions and chair dimensions with results of emotional dissatisfaction questionnaire and body map chart showed that plastic chair is better than wooden type in term of comfort, chair kind and slope of back rest, and in using plastic chairs students do not have to change their sitting postures; however,  due to incorrect design of foot rest and high effective depth of sea,،  discomfort and pain in lower limbs is higher in plastic chairs when compared with wooden chairs.

  11. Backed up and gone...

    CERN Multimedia

    Computer Security Team

    2013-01-01

    Remember how easy it is to lose your passwords for web applications (“Don’t let Chrome expose your passwords”)? This time we go bigger and discuss how easy it is to lose the passwords for every wireless access point you’ve visited. You just need to be running Android on your smartphone…   Apparently, Google was already capturing wireless access points during its Streetview campaign but was forced to stop this after complaints from data protection advocates. It was done “mistakenly”. With Google’s Android now dominating the smartphone market, they’re back to their old tricks. As a useful feature, Android (version 2.2 and higher) stores the identifiers (“SSIDs”) of wireless access points and credentials by default, so that you do not have to reissue them on every connection. The interesting part happens when the smartphone is automatically backed up to Google'...

  12. There and Back Again

    DEFF Research Database (Denmark)

    Danvy, Olivier; Goldberg, Mayer

    2002-01-01

    We present a programming pattern where a recursive function traverses a data structure---typically a list---at return time. The idea is that the recursive calls get us there (typically to a base case) and the returns get us back again while traversing the data structure. We name this programming...... pattern of traversing a data structure at return time "There And Back Again" (TABA).The TABA pattern directly applies to computing a symbolic convolution. It also synergizes well with other programming patterns, e.g., dynamic programming and traversing a list at double speed. We illustrate TABA...... and dynamic programming with Catalan numbers. We illustrate TABA and traversing a list at double speed with palindromes and we obtain a novel solution to this traditional exercise.A TABA-based function written in direct style makes full use of an Algol-like control stack and needs no heap allocation...

  13. Acknowledging the back patient

    DEFF Research Database (Denmark)

    Damsgaard, Janne Brammer; Bastrup, Lene; Norlyk, Annelise

    the back patient the narrative must be complemented by a different perspective that includes the issue of ethical responsibility. It is therefore also a question of adopting certain norms as binding; to be bound by obligation or loyalty. Thus, the literature review argues for a more process......-oriented patient approach that incorporates patients' narratives as an integral and ethical part of the care and treatment....

  14. Back to School

    Directory of Open Access Journals (Sweden)

    Pamela Osmond

    2014-10-01

    Full Text Available The Back to School of the title refers to post- school or second chance education in America. Mike Rose’s focus is on adult remedial (sic and occupational education.  However, although he writes about America, it is hard not to read this little book without a constant alternative reading of second chance learning or Technical and Further Education in the Australian context.

  15. Vibration control of an energy regenerative seat suspension with variable external resistance

    Science.gov (United States)

    Ning, Donghong; Sun, Shuaishuai; Du, Haiping; Li, Weihua; Zhang, Nong

    2018-06-01

    In this paper, an energy regenerative seat suspension with a variable external resistance is proposed and built, and a semi-active controller for its vibration control is also designed and validated. The energy regenerative seat suspension is built with a three-phase generator and a gear reducer, which are installed in the scissors structure centre of the seat suspension, and the vibration energy is directly harvested from the rotary movement of suspension's scissors structure. The electromagnetic torque of the semi-active seat suspension actuator is controlled by an external variable resistor. An integrated model including the seat suspension's kinematics and the generator is built and proven to match the test result very well. A simplified experimental phenomenon model is also built based on the test results for the controller design. A state feedback H∞ controller is proposed for the regenerative seat suspension's semi-active vibration control. The proposed regenerative seat suspension and its controller are validated with both simulations and experiments. A well-tuned passive seat suspension is applied to evaluate the regenerative seat's performance. Based on ISO 2631-1, the frequency-weighted root mean square (FW-RMS) acceleration of the proposed seat suspension has a 22.84% reduction when compared with the passive one, which indicates the improvement of ride comfort. At the same time, the generated RMS power is 1.21 W. The proposed regenerative seat suspension can greatly improve the driver's ride comfort and has the potential to be developed to a self-powered semi-active system.

  16. Child car seats – a habitat for house dust mites and reservoir for harmful allergens

    Directory of Open Access Journals (Sweden)

    David Clarke

    2015-02-01

    Full Text Available [b]Introduction and objective[/b]. House dust mites produce allergens which can cause or aggravate diseases such as asthma, eczema and rhinitis. The objectives of this study are to quantify typical house dust mite and Der p 1 allergen levels in child car seats, and to determine external variables that may influence mite populations in cars. [b]Materials and Methods[/b]. Dust samples were collected from the child car seats and driver seats of 106 cars using a portable vacuum sampling pump over a two minute sampling period. Mites were counted and identified and results were expressed as mites per gram (mites/g of dust, while Der p 1 content of samples were measured by enzyme-linked immunosorbent assay (ELISA. Questionnaires were completed by participants to identify environmental and behavioural effects on mite populations. Results were analysed using General Linear Model (GLM procedures. [b]Results[/b]. Twelve species of mites, of which nine are known to produce harmful allergens, were recorded from 212 dust samples. Over 80% of drivers’ seats and over 77% of child car seats harboured dust mites with a significant correlation (p = 0.001 between the mites/g of dust and Der p 1 content recovered from each seat. A mean of 53 mites/g of dust per seat was recovered, with a mean Der p 1 level of 1.1µg/g. Over 12% of driver seats and 15% of child car seats contained house dust mite levels sufficient to be risk factors for sensitisation and allergic reactions. [b]Conclusions[/b]. Child car seats and driver seats are habitats to a range of mite species which can be present in sufficient concentrations to cause or aggravate allergen related illnesses in individuals who are genetically predisposed.

  17. Restaurant No. 1 seating capacity increases by 240

    CERN Document Server

    Laëtitia Pedroso

    2010-01-01

    These days you need patience when looking for a seat in Restaurant No. 1 to eat your lunch. The opening of the new dining room, which will increase the restaurant’s seating capacity by 240, should alleviate the problem and improve service.   The new restaurant area. For the past several years the number of people using Restaurant No. 1 has grown steadily. Now, for a change, the restaurant itself is growing. Luz Lopez-Hernandez, leader of the project in the GS Department, explains: “Enlarging the restaurant has been on the GS Department's agenda for several years, but the project really got off the ground in 2009. Once it was approved and the design completed, construction itself only took seven months.” Seven months later, the restaurant extension is indeed on the verge of opening. One of the people who will be particularly happy is Joël Nallet, who manages the Novae restaurant: “I am thrilled, because until now, even if we managed to increase...

  18. The benefit of seat belt legislation in the United Kingdom.

    Science.gov (United States)

    McCarthy, M

    1989-09-01

    Legislation for compulsory wearing of seat belts by car drivers and front seat passengers has been acclaimed as a major public health advance. Reports from other countries, and two recent evaluative studies in the United Kingdom, have suggested that legislation reduces both deaths and injuries. To assess the effect of the UK law 5 years after its implementation, trends in routine data for 1976-1987 have been reviewed. There were two sources of data: mortality statistics, published by the Office of Population Censuses and Surveys in the quarterly Monitor DH4, and road accident statistics, recorded by the police and published by the Department of Transport. There is a downward trend in deaths over the period, but the data show little impact from the law. One explanation for this lack of effect is the risk compensation hypothesis, which suggests that "safety" improvements are transferred by drivers into increased performance--the amount and speed of travel. Public health policies need to take into account the complex behavioural interactions between travel and safety choices if they are to affect underlying trends.

  19. Development of a shear force measurement dummy for seat comfort.

    Directory of Open Access Journals (Sweden)

    Seong Guk Kim

    Full Text Available Seat comfort is one of the main factors that consumers consider when purchasing a car. In this study, we develop a dummy with a shear-force sensor to evaluate seat comfort. The sensor has dimensions of 25 mm × 25 mm × 26 mm and is made of S45C. Electroless nickel plating is employed to coat its surface in order to prevent corrosion and oxidation. The proposed sensor is validated using a qualified load cell and shows high accuracy and precision (measurement range: -30-30 N; sensitivity: 0.1 N; linear relationship: R = 0.999; transverse sensitivity: <1%. The dummy is manufactured in compliance with the SAE standards (SAE J826 and incorporates shear sensors into its design. We measure the shear force under four driving conditions and at five different speeds using a sedan; results showed that the shear force increases with speed under all driving conditions. In the case of acceleration and deceleration, shear force significantly changes in the lower body of the dummy. During right and left turns, it significantly changes in the upper body of the dummy.

  20. Development of a shear force measurement dummy for seat comfort.

    Science.gov (United States)

    Kim, Seong Guk; Ko, Chang-Yong; Kim, Dong Hyun; Song, Ye Eun; Kang, Tae Uk; Ahn, Sungwoo; Lim, Dohyung; Kim, Han Sung

    2017-01-01

    Seat comfort is one of the main factors that consumers consider when purchasing a car. In this study, we develop a dummy with a shear-force sensor to evaluate seat comfort. The sensor has dimensions of 25 mm × 25 mm × 26 mm and is made of S45C. Electroless nickel plating is employed to coat its surface in order to prevent corrosion and oxidation. The proposed sensor is validated using a qualified load cell and shows high accuracy and precision (measurement range: -30-30 N; sensitivity: 0.1 N; linear relationship: R = 0.999; transverse sensitivity: <1%). The dummy is manufactured in compliance with the SAE standards (SAE J826) and incorporates shear sensors into its design. We measure the shear force under four driving conditions and at five different speeds using a sedan; results showed that the shear force increases with speed under all driving conditions. In the case of acceleration and deceleration, shear force significantly changes in the lower body of the dummy. During right and left turns, it significantly changes in the upper body of the dummy.

  1. The seating mechanics of head-neck modular tapers in vitro: Load-displacement measurements, moisture, and rate effects.

    Science.gov (United States)

    Ouellette, Eric S; Shenoy, Aarti A; Gilbert, Jeremy L

    2018-04-01

    The mechanically assisted crevice corrosion performance of head-neck modular tapers is a significant concern in orthopedic biomaterials. Fretting crevice corrosion processes in modular tapers are thought to be influenced by a wide array of factors including seating mechanics of the junction, hence there is a need for in vitro test methods that can assess their performance. This study presented a test method to directly measure the load-displacement seating mechanics of modular tapers and used this method to compare the seating mechanics for different tapers, moisture, seating loads and seating rates. Seating mechanics were explored whereby the instantaneous load-displacement behavior of the head seating onto the neck is captured and used to define the mechanics of seating. Two distinct taper design/material combinations were assembled wet or dry using axially applied loads (500, 1,000, 2,000, and 4,000 N) at two loading rates of 100 and 10 4  N/s (n = 5 for each condition) using a servohydraulic test frame. The results showed that pull-off strength scaled with seating load and ranged between 43% and 68% of seating load depending on sample and wetness. Tapers seated wet had higher pull-off strengths (2,200 ± 300 N) than those seated dry (1,800 ± 200 N, p mechanics (load-displacement plots) varied due to sample type and due to wetness with differences in seating energy, seating stiffness, and seating displacement. These results show the detailed mechanics of seating during assembly and provide significant insight into the complex interplay of factors associated with even "ideal" seating (axial, quasistatic) loading. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1164-1172, 2018. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

  2. Seat belt use to save face: impact on drivers' body region and nature of injury in motor vehicle crashes.

    Science.gov (United States)

    Han, Guang-Ming; Newmyer, Ashley; Qu, Ming

    2015-01-01

    Seat belt use is the single most effective way to save lives and reduce injuries in motor vehicle crashes. However, some case reports described seat belt use as a double-edged sword because some injuries are related to seat belt use in motor vehicle crashes. To comprehensively understand the effects of seat belt use, we systemically investigated the association between seat belt use and injuries based on anatomic body region and type of injury in drivers involved in motor vehicle crashes. The injury information was obtained by linking crash reports with hospital discharge data and categorized by using the diagnosis codes based on the Barell injury diagnosis matrix. A total of 10,479 drivers (≥15 years) in passenger vehicles involved in motor vehicle crashes from 2006 to 2011 were included in this study. Seat belt use significantly reduced the proportions of traumatic brain injury (10.4% non-seat belt; 4.1% seat belt) and other head, face, and neck injury (29.3% non-seat belt; 16.6% seat belt) but increased the proportion of spine: thoracic to coccyx injury (17.9% non-seat belt; 35.5% seat belt). Although the proportion of spine: thoracic to coccyx injury was increased in drivers with seat belt use, the severity of injury was decreased, such as fracture (4.2% with seat belt use; 22.0% without seat belt use). Furthermore, the total medical charges decreased due to the change of injury profiles in drivers with seat belt use from a higher percentage of fractures (average cost for per case $26,352) to a higher percentage of sprains and/or strains ($1,897) with spine: thoracic to coccyx injury. This study provide a comprehensive picture for understanding the protective effect of seat belt use on injuries based on anatomic body region and type of injury in drivers involved in motor vehicle crashes.

  3. Best seating condition in children with spastic cerebral palsy : One type does not fit all

    NARCIS (Netherlands)

    Angsupaisal, Mattana; Dijkstra, Linze-Jaap; la Bastide-van Gemert, Sacha; van Hoorn, Jessika F.; Burger, Karine; Maathuis, Carel G. B.; Hadders-Algra, Mijna

    2017-01-01

    Background: The effect of forward-tilting of the seat surface and foot-support in children with spastic cerebral palsy (CP) is debated. Aim: To assess the effect of forward-tilting of the seat surface and foot-support in children with CP on kinematic head stability and reaching. Methods: Nineteen

  4. Kineto-dynamic design optimisation for vehicle-specific seat-suspension systems

    Science.gov (United States)

    Shangguan, Wen-Bin; Shui, Yijie; Rakheja, Subhash

    2017-11-01

    Designs and analyses of seat-suspension systems are invariably performed considering effective vertical spring rate and damping properties, while neglecting important contributions due to kinematics of the widely used cross-linkage mechanism. In this study, a kineto-dynamic model of a seat-suspension is formulated to obtain relations for effective vertical suspension stiffness and damping characteristics as functions of those of the air spring and the hydraulic damper, respectively. The proposed relations are verified through simulations of the multi-body dynamic model of the cross-linkage seat-suspension in the ADAMS platform. The validity of the kineto-dynamic model is also demonstrated through comparisons of its vibration transmission response with the experimental data. The model is used to identify optimal air spring coordinates to attain nearly constant natural frequency of the suspension, irrespective of the seated body mass and seated height. A methodology is further proposed to identify optimal damping requirements for vehicle-specific suspension designs to achieve minimal seat effective amplitude transmissibility (SEAT) and vibration dose value (VDV) considering vibration spectra of different classes of earthmoving vehicles. The shock and vibration isolation performance potentials of the optimal designs are evaluated under selected vehicle vibration superimposed with shock motions. Results show that the vehicle-specific optimal designs could provide substantial reductions in the SEAT and VDV values for the vehicle classes considered.

  5. 75 FR 31691 - Safety Standard for Infant Bath Seats: Final Rule

    Science.gov (United States)

    2010-06-04

    ... would actually make the requirement less restrictive than what is already in the voluntary standard. For... various water levels and possible head positions of occupants vs. angles of bath seats to determine what... instructional literature or warnings, it is foreseeable that caregivers will install the bath seat on a wet and...

  6. Creative thinking of design and redesign on SEAT aircraft cabin testbed: a case study

    NARCIS (Netherlands)

    Tan, C.F.; Chen, W.; Rauterberg, G.W.M.

    2009-01-01

    this paper, the intuition approach in the design and redesign of the environmental friendly innovative aircraft cabin simulator is presented.. The aircraft cabin simulator is a testbed that used for European Project SEAT (Smart tEchnologies for Stress free Air Travel). The SEAT project aims to

  7. 75 FR 66064 - Extension of Application Period for Seats for the Stellwagen Bank National Marine Sanctuary...

    Science.gov (United States)

    2010-10-27

    ... Period for Seats for the Stellwagen Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric... following vacant seats on the Stellwagen Bank National Marine Sanctuary Advisory Council: Advisory Council...

  8. 77 FR 27188 - Extension of Application Period for Seats for the Channel Islands National Marine Sanctuary...

    Science.gov (United States)

    2012-05-09

    ... Period for Seats for the Channel Islands National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric... following vacant seats on the Channel Islands National Marine Sanctuary Advisory Council: Chumash Community...

  9. 78 FR 5779 - Extension of Application Period for Seats for the Channel Islands National Marine Sanctuary...

    Science.gov (United States)

    2013-01-28

    ... Period for Seats for the Channel Islands National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric... following vacant seats on the Channel Islands National Marine Sanctuary Advisory Council: Business Alternate...

  10. 75 FR 57444 - Extension of Application Period for Seats for the Stellwagen Bank National Marine Sanctuary...

    Science.gov (United States)

    2010-09-21

    ... Period for Seats for the Stellwagen Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric... following vacant seats on the Stellwagen Bank National Marine Sanctuary Advisory Council: Advisory Council...

  11. Pattern of seat belt use and its associated factors among taxi drivers ...

    African Journals Online (AJOL)

    Objective: Road traffic injuries constitute a major public health concern that demands effective interventions. Use of car seat belts is recommended as an effective intervention to reduce serious and fatal road traffic injuries. The study intended to investigate the pattern of seat belt use and its correlates among taxi drivers in ...

  12. Demonstration of the Trauma Nurses Talk Tough seat belt diversion program in North Carolina.

    Science.gov (United States)

    2014-03-01

    Trauma Nurses Talk Tough is a seat belt diversion program originally developed at the Legacy Emanuel Hospital in Portland, Oregon, in 1988. Attendance at the course is a condition for a one-time dismissal of a seat belt citation without fine or court...

  13. A study on mechanism of wear on body seat in nozzle of diesel fuel injector

    Energy Technology Data Exchange (ETDEWEB)

    Jeonggee, Son; Yamashita, Toru; Sato, Susumu; Kosaka, Hidenori; Masuko, Masabumi [Tokyo Institute of Technology (Japan)

    2013-06-01

    Wear of nozzle's body seat of diesel fuel injector, which is caused by the collision of needle on the body seat in a nozzle, affects fuel spray behaviors and injection characteristics. Recently, to reduce the wear of body seat, DLC nozzles are widely used. The DLC on the needle which is called diamond-like carbon has a certain effect in reducing wear of body seat. However, disallowable wear is reported at limited engine operating conditions. Moreover, the wear mechanism of body seat with DLC coated needle has not been made clear yet. In this study, the influence of temperature of the body seat and fuel property on the wear of DLC nozzle was investigated with a newly developed wear testing device which was constructed based on common-rail injection system. Worn surfaces of body seat were observed by FE-SEM, laser scanning microscope and EPMA. The obtained results from the measurements show that DLC nozzle has much less wear amount than non-DLC nozzle on the body seat and the corrosive wear effect is suppressed with DLC nozzle. (orig.)

  14. Seat-belt use still low in Kuwait: self-reported driving behaviours among adult drivers.

    Science.gov (United States)

    Raman, Sudha R; Ottensmeyer, C Andrea; Landry, Michel D; Alfadhli, Jarrah; Procter, Steven; Jacob, Susan; Hamdan, Elham; Bouhaimed, Manal

    2014-01-01

    Kuwait mandated seat-belt use by drivers in 1976 and by front seat passengers in 1994. The study objectives were to identify and estimate current factors associated with seat-belt use and levels of potentially unsafe driving behaviours in Kuwait. In 2010, 741 adults were surveyed regarding driving habits and history. Only 41.6% of drivers reported always using a seat belt. Front seat passenger belt use was more common (30.5%) than rear seat belt use (6.5%). Distracted driving behaviours were common, including mobile phone use ('always' or 'almost always': 51.1%) and texting/SMS (32.4%). Logistic regression indicated that drivers who were young (18-19 years), male, Kuwaiti nationals or non-Kuwaiti Arabs, drove over the speed limit, had traffic violation tickets or >1 car crashes in the last year, were less likely to use seat belts. Targeted initiatives to increase public awareness and to enforce car-safety legislation, including use of seat belts, are necessary to decrease the health burden of car crashes in Kuwait.

  15. Seat Adjustment Design of an Intelligent Robotic Wheelchair Based on the Stewart Platform

    Directory of Open Access Journals (Sweden)

    Po Er Hsu

    2013-03-01

    Full Text Available A wheelchair user makes direct contact with the wheelchair seat, which serves as the interface between the user and the wheelchair, for much of any given day. Seat adjustment design is of crucial importance in providing proper seating posture and comfort. This paper presents a multiple-DOF (degrees of freedom seat adjustment mechanism, which is intended to increase the independence of the wheelchair user while maintaining a concise structure, light weight, and intuitive control interface. This four-axis Stewart platform is capable of heaving, pitching, and swaying to provide seat elevation, tilt-in-space, and sideways movement functions. The geometry and types of joints of this mechanism are carefully arranged so that only one actuator needs to be controlled, enabling the wheelchair user to adjust the seat by simply pressing a button. The seat is also equipped with soft pressure-sensing pads to provide pressure management by adjusting the seat mechanism once continuous and concentrated pressure is detected. Finally, by comparing with the manual wheelchair, the proposed mechanism demonstrated the easier and more convenient operation with less effort for transfer assistance.

  16. 49 CFR 571.209 - Standard No. 209; Seat belt assemblies.

    Science.gov (United States)

    2010-10-01

    ... seat belt assembly to fit the user, including such hardware that may be integral with a buckle... the proper use of the assembly, stressing particularly the importance of wearing the assembly snugly... of Standard No. 208. (a)(1) A manual seat belt assembly, which is subject to the requirements of S5.1...

  17. Long-term conditioning of deep-seated rockslides in deglaciated valleys: the Spriana case study

    Science.gov (United States)

    Agliardi, Federico; Crosta, Giovanni B.

    2015-04-01

    Deep-seated rockslides in alpine valleys evolve over long time under the action of multiple triggers. Early Warning based on monitoring is often the only effective approach to cope with these landslides, but it requires an improved understanding of mechanisms interplaying over long time. Deep-seated rockslides are often characterized by long-term 'creep' and seasonal displacement components, contributing to measured displacement patterns which are often modelled as rockslide responses to hydrologic perturbations. Although this hydro-mechanical modelling approach fits the behaviour of disrupted rockslide masses with well-developed shear zones, it is often insufficient to explain the initial onset and the long-term components of creep movements of deep-seated rockslides. This outlines the need to link long-term evolution of rock slopes and their sensitivity to triggers. We discuss the Spriana rockslide, affecting the steep left-hand flank of Val Malenco (italian Central Alps). Documented instabilities date back to 1912, whereas the rockslide underwent major acceleration stages in 1960 and 1977-78 and later minor reactivations. We reviewed a large amount of data collected since 1978 by extensive geotechnical site investigation (borehole drilling, exploratory adits, and seismic refraction) and monitoring activities (ground surface and deep displacements, pore pressures) motivated by potential catastrophic collapse threatening the city of Sondrio area. We performed rock mass characterization based on laboratory studies on intact rock samples, field surveys and drillcore logging. These data allowed re-evaluating the geological model of the Spriana rockslide, which is a compound slide of up to 50 Mm3 of slope debris and fractured gneiss, with multiple shear failure zones up to 90 m deep. Two main scarps developed in different stages, suggesting progressive failure processes. The rockslide creeps at slow rates of 0.4-3 cm/a, and undergoes acceleration stages (weeks to

  18. Imaging in mechanical back pain

    DEFF Research Database (Denmark)

    Hansen, Bjarke Brandt; Hansen, Philip; Carrino, John A

    2016-01-01

    Low back pain is common and relates to a variety of overlapping pathologies. Within the last few decades, almost every medical imaging modality has been applied in the evaluation of low back pain. Imaging of the spine has a high priority in the assessment of patients with low back pain, who seem ...

  19. Understanding cultural influences on back pain and back pain research.

    Science.gov (United States)

    Henschke, Nicholas; Lorenz, Eva; Pokora, Roman; Michaleff, Zoe A; Quartey, Jonathan N A; Oliveira, Vinicius Cunha

    2016-12-01

    Low back pain is highly prevalent and places a considerable burden on individuals, their families and communities. This back pain burden is unequally distributed around the world and within populations. Clinicians and researchers addressing back pain should be aware of the cultural, social and political context of back pain patients and how this context can influence pain perception, disability and health care use. Culture, which influences the beliefs and behaviour of individuals within a social group, could be considered an important contributor to the unequal distribution of back pain. However, there is paucity of high-quality research exploring the influence of culture on the experience and management of back pain. Further development and testing of specific tools, assessment methods and communication strategies are needed to improve our understanding of how cultural practices, values and identifications affect those dealing with back pain. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Back to basics audio

    CERN Document Server

    Nathan, Julian

    1998-01-01

    Back to Basics Audio is a thorough, yet approachable handbook on audio electronics theory and equipment. The first part of the book discusses electrical and audio principles. Those principles form a basis for understanding the operation of equipment and systems, covered in the second section. Finally, the author addresses planning and installation of a home audio system.Julian Nathan joined the audio service and manufacturing industry in 1954 and moved into motion picture engineering and production in 1960. He installed and operated recording theaters in Sydney, Austra

  1. The Poster Strikes Back

    DEFF Research Database (Denmark)

    Christensen, Line Hjorth

    2005-01-01

    The paper discusses fundamental issues in relation to placing graphic design in locations such as museums of decorative arts and living history museums. Based on my Ph.D. project on British commercial posters of the interwar years and approached from a combined perspective of museology, semiotics...... and design history, I argue that the poster during the interwar years inhabits a new active position. By exploiting and challenging the commercial and aesthetic paradox out of which it arose, the poster ‘strikes back' as a museologized, exhibited object. Rather than being absorbed into the city swirl...

  2. Giving Back, Moving Forward

    Directory of Open Access Journals (Sweden)

    Louise Fortmann

    2014-07-01

    Full Text Available While reflecting on her own experience with giving back in Zimbabwe, Fortmann considers how the idea of “giving back” sits at the intersection of feminist theory, participatory research, and the democratization of science. From feminist theory arises the question of how to reciprocate to those who have contributed to our research. The participatory research and democratization of science literature push us to recognize and consider the collaborative nature of our research. Fortmann concludes by identifying three categories of reciprocity in research: material, intellectual, and personal. Sharing must occur, regardless of the kind of research taking place.

  3. Roll back malaria update.

    Science.gov (United States)

    1999-10-01

    This article presents the activities under WHO's Roll Back Malaria (RBM) program in Asia, particularly in Nepal, Indonesia, India, Bangladesh, Sri Lanka and the Philippines. In India, the RBM program will start in 5 districts with a major malaria problem. A national committee has been formed by researchers, which will be able to provide operational and strategic support and research expertise in relation to malaria. In Bangladesh, the RBM program was initiated in the sparsely populated hill tract areas of Banderban and Chittagong where access to health care is very poor. At the district level, effective partnerships with private practitioners, politicians, community leaders, school teachers, the press and district Ministry of Health officials are operating to plan for rolling back malaria. In Myanmar, Cambodia, Lao People's Democratic Republic, Yunnan province of China, Vietnam, and Thailand, the focus of the RBM program was to move health care closer to the malaria-infected communities. WHO¿s Global Health Leadership Fellowship Programme, supported by the UN Foundation and Rockefeller Foundation, enables potential leaders to experience the work of UN agencies and contribute to the work of the organization for 2 years. Three out of four persons appointed to the RBM program received prestigious awards: Dr. Paola Marchesini of Brazil; Dr. Tieman Diarra of Mali; and Dr. Bob Taylor of the UK.

  4. Hardfacing materials used in valves for seating and wear surfaces

    International Nuclear Information System (INIS)

    Knecht, W.G.

    1996-01-01

    Most valves and essentially all critical service valves utilize hardfacing materials for seating and wear surfaces to minimize wear and galling. The type of hardfacing materials used, the methods of deposition, and the quality of the final product all contribute to the wear characteristics, required operating force, and life of the final product. Over the last forty years the most prevalent hardfacing materials furnished to the commercial nuclear industry consisted of cobalt base and nickel base materials. In the last several years there has been extensive development and evaluation work performed on iron base hardfacing materials. This presentation will address the wear characteristics of the various materials and the importance of consistent quality of deposited materials necessary to achieve optimum product performance and longevity

  5. Hardfacing materials used in valves for seating and wear surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Knecht, W.G.

    1996-12-01

    Most valves and essentially all critical service valves utilize hardfacing materials for seating and wear surfaces to minimize wear and galling. The type of hardfacing materials used, the methods of deposition, and the quality of the final product all contribute to the wear characteristics, required operating force, and life of the final product. Over the last forty years the most prevalent hardfacing materials furnished to the commercial nuclear industry consisted of cobalt base and nickel base materials. In the last several years there has been extensive development and evaluation work performed on iron base hardfacing materials. This presentation will address the wear characteristics of the various materials and the importance of consistent quality of deposited materials necessary to achieve optimum product performance and longevity.

  6. «Take a Back Seat»: due attività per l’insegnamento della microlingua straniera

    Directory of Open Access Journals (Sweden)

    Matteo Broggini

    2015-12-01

    Full Text Available The growing presence of foreign instrumentalists and singers in Italian conservatories calls for increased attention to the planning of support didactic activities aimed at teaching the micro-language of music in the context of Italian as a second language. The article describes two didactic activities that are easily replicable, also with different materials than those presented by way of example. Both assignments apply the principles of humanistic-affective language teaching and of cooperative learning to the Italian musical micro-language.

  7. 76 FR 64074 - Request for Applications for Vacant Seats on the Flower Garden Banks National Marine Sanctuary...

    Science.gov (United States)

    2011-10-17

    ... for Vacant Seats on the Flower Garden Banks National Marine Sanctuary Advisory Council AGENCY: Office... ONMS is seeking applications for the following six vacant seats on the Flower Garden Banks National... experience in relation to the seat for which they are applying; community and professional affiliations...

  8. 77 FR 57481 - Special Conditions: Embraer S.A., Models EMB-135 and EMB-145 Series; Airplane Seats with Non...

    Science.gov (United States)

    2012-09-18

    ... flammability of seat cushions. With the seat design being mostly fabric and metal, the contribution to a fire..., large, non-metallic panels that would affect survivability during a post-crash fire event. The.... At the time the applicable rules were written, seats were designed with a metal frame covered by...

  9. Naturalistic driving study of rear seat child occupants: Quantification of head position using a Kinect™ sensor.

    Science.gov (United States)

    Arbogast, Kristy B; Kim, Jinyong; Loeb, Helen; Kuo, Jonny; Koppel, Sjaan; Bohman, Katarina; Charlton, Judith L

    2016-09-01

    Restraint performance is evaluated using anthropomorphic test devices (ATDs) positioned in prescribed, optimal seating positions. Anecdotally, humans-children in particular-assume a variety of positions that may affect restraint performance. Naturalistic driving studies (NDSs), where cameras and other data acquisition systems are placed in a vehicle used by participants during their regular transportation, offer means to collect these data. To date, these studies have used conventional video and analysis methods and, thus, analyses have largely been qualitative. This article describes a recently completed NDS of child occupants in which their position was monitored using a Kinect sensor to quantify their head position throughout normal, everyday driving trips. A study vehicle was instrumented with a data acquisition system to measure vehicle dynamics, a set of video cameras, and a Kinect sensor providing 3D motion capture at 1 Hz of the rear seat occupants. Participant families used the vehicle for all driving trips over 2 weeks. The child occupants' head position was manually identified via custom software from each Kinect color image. The 3D head position was then extracted and its distribution summarized by seat position (left, rear, center) and restraint type (forward-facing child restraint system [FFCRS], booster seat, seat belt). Data from 18 families (37 child occupants) resulted in 582 trips (with children) for analysis. The average age of the child occupants was 45.6 months and 51% were male. Twenty-five child occupants were restrained in FFCRS, 9 in booster seats, and 3 in seat belts. As restraint type moved from more to less restraint (FFCRS to booster seat to seat belt), the range of fore-aft head position increased: 218, 244, and 340 mm on average, respectively. This observation was also true for left-right movement for every seat position. In general, those in the center seat position demonstrated a smaller range of head positions. For the first

  10. An Active Seat Controller with Vehicle Suspension Feedforward and Feedback States: An Experimental Study

    Directory of Open Access Journals (Sweden)

    Abdulaziz Alfadhli

    2018-04-01

    Full Text Available Active seat suspensions can be used to reduce the harmful vertical vibration of a vehicle’s seat by applying an external force using a closed loop controller. Many of the controllers found in the literature are difficult to implement practically, because they are based on using unavailable or difficult and costly measurements. This paper presents both simulation and experimental studies of five novel, simple, and cost-effective control strategies to be used for an active seat suspension in order to improve ride comfort at low frequencies below 20 Hz. These strategies use available and measurable feedforward (preview information states from the vehicle secondary suspension, as well as feedback states from the seat suspension, together with gains optimised to minimise the occupant vibration. The gains were optimised using a genetic algorithm (GA, with a fitness function based on the seat effective amplitude transmissibility (SEAT factor. Constraints on the control force and the seat suspension stroke were also included in the optimisation algorithm. Simulation and laboratory experimental tests were carried out to assess the performance of the proposed controllers according to the ISO 2631-1 standard, in both the frequency and time domains with a range of different road profiles. The experimental tests were performed using a multi-axis simulation table (MAST and a physical active seat suspension configured as a hardware-in-loop (HIL simulation with a virtual linear quarter vehicle model (QvM. The results demonstrate that the proposed controllers substantially attenuate the vertical vibration at the driver’s seat compared with both a passive and a proportional-integral-derivative (PID active seat suspension and thus improve ride comfort together with reducing vibration-linked health risks. Moreover, experimental results show that employing both feedforward information and feedback vehicle body and seat acceleration signals in the controller

  11. Nonconformities in real-world fatal crashes--electronic stability control and seat belt reminders.

    Science.gov (United States)

    Lie, Anders

    2012-01-01

    Many new safety systems are entering the market. Vision Zero is a safety strategy aiming at the elimination of fatalities and impairing injuries by the use of a holistic model for safe traffic to develop a safe system. The aim of this article is to analyze fatalities in modern cars with respect to the Vision Zero model with special respect to electronic stability control (ESC) systems and modern seat belt reminders (SBRs). The model is used to identify and understand cases where cars with ESC systems lost control and where occupants were unbelted in a seat with seat belt reminders under normal driving conditions. The model for safe traffic was used to analyze in-depth studies of fatal crashes with respect to seat belt use and loss of control. Vehicles from 2003 and later in crashes from January 2004 to mid-2010 were analyzed. The data were analyzed case by case. Cars that were equipped with ESC systems and lost control and occupants not using the seat belt in a seat with a seat belt reminder were considered as nonconformities. A total of 138 fatal crashes involving 152 fatally injured occupants were analyzed. Cars with ESC systems had fewer loss-of-control-relevant cases than cars without ESC systems. Thirteen percent of the ESC-equipped vehicles had loss-of-control-relevant crashes and 36 percent of the cars without ESC systems had loss-of-control-relevant crashes. The analysis indicates that only one car of the 9 equipped with ESC that lost control did it on a road surface with relevant friction when driving within the speed restriction of the road. In seats with seat belt reminders that are in accordance with the European New Car Assessment Programme's (Euro NCAP) protocol, 93 percent of the occupants were using a seat belt. In seats without reminders this number was 74 percent. This study shows that ESC systems result in a very significant reduction in fatal crashes, especially under normal driving conditions. Under extreme driving conditions such as speeding

  12. Bringing "indigenous" ownership back

    DEFF Research Database (Denmark)

    Kragelund, Peter

    2012-01-01

    policies thrive again, this time disguised in terms such as ‘empowerment’, but just as politicised as in the 1970s. Zambia is at the heart of this development. In the light of liberalisation, booming commodity prices and the increasing importance of Chinese investors, this article seeks to further our...... understanding of how processes of exclusion interact with domestic politics in Zambia. It argues that the Citizens Economic Empowerment Commission, a new institution to bring ownership back to Zambians, builds on a long tradition of nationalist policies in Zambia, while its actual work is strictly related...... to the critique of the growing foreign dominance over the economy, and in particular of the upsurge in Chinese investments....

  13. Back wall solar cell

    Science.gov (United States)

    Brandhorst, H. W., Jr. (Inventor)

    1978-01-01

    A solar cell is disclosed which comprises a first semiconductor material of one conductivity type with one face having the same conductivity type but more heavily doped to form a field region arranged to receive the radiant energy to be converted to electrical energy, and a layer of a second semiconductor material, preferably highly doped, of opposite conductivity type on the first semiconductor material adjacent the first semiconductor material at an interface remote from the heavily doped field region. Instead of the opposite conductivity layer, a metallic Schottky diode layer may be used, in which case no additional back contact is needed. A contact such as a gridded contact, previous to the radiant energy may be applied to the heavily doped field region of the more heavily doped, same conductivity material for its contact.

  14. Back from Sestriere

    CERN Multimedia

    2006-01-01

    Jean-Yves Le Meur during the Special Slalom at the Paralympic Winter Games on 19 March. (Photo credit: G. Place and B. Loyseau) CERN's Olympian, Jean-Yves Le Meur (IT Department), is back from Sestriere after competing in the Paralympic Winter Games in the sitting skiing competition. Ranked 14th after his first run in the Special Slalom, Jean-Yves had an excellent second run which brought him right up the field. He eventually finished ninth, 11 seconds off the gold medal place. In the Giant Slalom, he unfortunately fell in the final gates of his second run, having reached 10th position in his first run. With about 50 top athletes from all the competing nations contesting each event, the competition was stiff, and our warmest congratulations go to Jean-Yves for his participation and great performance!

  15. Crust-mantle branch of the global carbon cycle and origin of deep-seated hydrocarbons

    Directory of Open Access Journals (Sweden)

    Sorokhtin N. O.

    2018-03-01

    Full Text Available The processes of multi-stage and polycyclic transformation and transfer of carbon in the crust and mantle have been described. The sediments drawn in the plate underthrust zones break down, become transformed and altered by metamorphic events, and part of the newly formed carbon compounds is transferred by the mantle convective currents to rift zones of the mid-oceanic ridges and carried up to the surface as hydrocarbons of various composition and carbon dioxide. This material becomes re-deposited on the sea floor as sediments forming carbonaceous and carbon-bearing units. As a result of multi-stage mechanism of physical and chemical transformations in the crust-mantle areas of the Earth hydrocarbon compounds acquire features of abiogenic origin remaining, in fact, exogenic. The revealed crust-mantle carbon cycle represents part of a global process for the cyclic carbon transfer from the atmosphere to the mantle and back. The scale of its manifestation is likely not so wide, and numerous small (mm and portions of millimeters particles of exogenic substance and dispersed carbon drawn in the plate underthrust zones form a stable geochemical tail of the crustal direction in the mantle propagating in the plane of convective currents motion. The scale of this process may be indirectly suggested by the volumes of hydrocarbon and carbon dioxide de-gassing and hydrogen in the rift systems of the Earth crust. The amount of generated hydrocarbon gases with deep-seated origin cannot form large gas and oil-and-gas fields since their significant part is transferred to the atmosphere. Just some portion of compounds may be deposited in oceanic sediments and generate gas-hydrate pools.

  16. Biomechanical investigation of prolonged driving in an ergonomically designed truck seat prototype.

    Science.gov (United States)

    Cardoso, Michelle; McKinnon, Colin; Viggiani, Dan; Johnson, Michel J; Callaghan, Jack P; Albert, Wayne J

    2018-03-01

    A postural evaluation during a prolonged driving task was conducted to determine the ergonomic validity of a new freely adjustable truck seat prototype. Twenty participants were recruited to perform two 2-h simulated driving sessions. Postures were assessed using motion capture, accelerometers and pressure pads. Subjective discomfort was also monitored in 15-min increments using ratings of perceived discomfort (RPD) and the Automotive Seating Discomfort Questionnaire. Participants had a more neutral spine posture during the first hour of the drive and reported lower RPDs while sitting in the prototype. Pairing the gluteal backrest panel with the adjustable seat pan helped reduce the average sitting pressure. The industry-standard truck seat may lead to the development of poor whole body posture, and the proposed ergonomic redesign of a new truck seat helped improve sitting posture and reduce perceived discomfort. Practitioner Summary: A new freely adjustable truck seat prototype was compared to an Industry standard seat to assess hypothesised improvements to sitting posture and discomfort for long haul driving. It was found that the adjustable panels in the prototype helped promote spine posture, reduce sitting pressure and improved discomfort ratings.

  17. Factors related to seatbelt-wearing among rear-seat passengers in Malaysia.

    Science.gov (United States)

    Ng, Choy Peng; Law, Teik Hua; Wong, Shaw Voon; Kulanthayan, S

    2013-01-01

    The benefit of wearing a rear seatbelt in reducing the risk of motor vehicle crash-related fatalities and injuries has been well documented in previous studies. Wearing a seatbelt not only reduces the risk of injury to rear-seat passengers, but also reduces the risk of injury to front-seat occupant who could be crushed by unbelted rear-seat passengers in a motor vehicle crash. Despite the benefits of wearing a rear seatbelt, its rate of use in Malaysia is generally low. The objective of this study was to identify factors that are associated with the wearing of a seatbelt among rear-seat passengers in Malaysia. Multinomial logistic regression analysis of the results of a questionnaire survey of 1651 rear-seat passengers revealed that rear-seat passengers who were younger, male, single and less educated and who had a perception of a low level of legislation enforcement, a lower risk-aversion and less driving experience (only for passengers who are also drivers) were less likely to wear a rear seatbelt. There was also a significant positive correlation between driver seatbelt and rear seatbelt-wearing behaviour. This implies that, in regards to seatbelt-wearing behaviour, drivers are more likely to adopt the same seatbelt-wearing behaviour when travelling as rear-seat passengers as they do when driving. These findings are crucial to the development of new interventions to increase the compliance rate of wearing a rear seatbelt. Copyright © 2012 Elsevier Ltd. All rights reserved.

  18. Comparative Performance of Rear Facing Child Restraint Systems on the CMVSS 213 Bench and Vehicle Seats

    Science.gov (United States)

    Tylko, Suzanne; Locey, Caitlin M.; Garcia-Espana, J. Felipe; Arbogast, Kristy B.; Maltese, Matthew R.

    2013-01-01

    The purpose of this study was to compare the dynamic response of rear-facing child restraint systems (RFCRS) installed on the CMVSS 213 sled bench and a selection of vehicle seats. Thirty-six sled tests were conducted: three models of rear facing CRS with an anthropomorphic test device (ATD) representing a 12 month old child (CRABI) were affixed via lower anchors (LATCH), 3 point belt without CRS base, and 3 point belt with CRS base to one of three vehicle seats or the CMVSS 213 bench seat. All CRS were subjected to an identical sled acceleration pulse. Two types of matched pair analysis: “bench-to-vehicle” and “method of attachment” were conducted. Statistically significant differences were observed in the kinematic responses of the ATD and the CRS. This is the first study to quantify differences between the regulatory bench and vehicle seats on a system level and evaluate the influence of attachment method. Our results show that the difference in RFCRS forward excursion between 3-point belt with base and LATCH installations was between 1 and 7 percent on the bench and 22 to 76 percent on the vehicle seats. When evaluating the dynamic performance of RFCRS, the use of real vehicle seats from vehicles that commonly carry children may provide valuable insight. The findings would require further confirmation using a broader selection of RFCRS and vehicle seats, before generalizable conclusions can be drawn. PMID:24406967

  19. Physiological Motion Axis for the Seat of a Dynamic Office Chair

    Science.gov (United States)

    Kuster, Roman Peter; Bauer, Christoph Markus; Oetiker, Sarah; Kool, Jan

    2016-01-01

    Objective The aim of this study was to determine and verify the optimal location of the motion axis (MA) for the seat of a dynamic office chair. Background A dynamic seat that supports pelvic motion may improve physical well-being and decrease the risk of sitting-associated disorders. However, office work requires an undisturbed view on the work task, which means a stable position of the upper trunk and head. Current dynamic office chairs do not fulfill this need. Consequently, a dynamic seat was adapted to the physiological kinematics of the human spine. Method Three-dimensional motion tracking in free sitting helped determine the physiological MA of the spine in the frontal plane. Three dynamic seats with physiological, lower, and higher MA were compared in stable upper body posture (thorax inclination) and seat support of pelvic motion (dynamic fitting accuracy). Spinal kinematics during sitting and walking were compared. Results The physiological MA was at the level of the 11th thoracic vertebra, causing minimal thorax inclination and high dynamic fitting accuracy. Spinal motion in active sitting and walking was similar. Conclusion The physiological MA of the seat allows considerable lateral flexion of the spine similar to walking with a stable upper body posture and a high seat support of pelvic motion. Application The physiological MA enables lateral flexion of the spine, similar to walking, without affecting stable upper body posture, thus allowing active sitting while focusing on work. PMID:27150530

  20. Occupant Kinematics in Simulated Autonomous Driving Vehicle Collisions: Influence of Seating Position, Direction and Angle.

    Science.gov (United States)

    Kitagawa, Yuichi; Hayashi, Shigeki; Yamada, Katsunori; Gotoh, Mitsuaki

    2017-11-01

    This two-part study analyzed occupant kinematics in simulated collisions of future automated driving vehicles in terms of seating configuration. In part one, a frontal collision was simulated with four occupants with the front seats reversed. The left front seat occupant was unbelted while the others were belted. In part two of the study, occupant restraint was examined in various seating configurations using a single seat model with a three-point seatbelt. The seat direction with respect to impact was considered as forward, rearward, and lateral facing in 45 degree increments. The effect of seat recline was also studied in the forward-facing and rear-facing cases by assuming three positions: driving position, resting position and relaxed position. Occupants were represented by human body finite element models. The results of part one showed that the front seat (rear-facing) occupants were restrained by the seatback, resulting in T1 forward displacement less than 100 mm; the rear seat occupants were restrained by the seatbelt resulting larger T1 forward displacement more than 500 mm. The results of the part two showed the directional dependence of occupant restraint. Greater T1 displacements were observed when the occupant faced lateral or front oblique. However, the seatbelt provided some restraint in all directions considered. The seatback generated contact force to the occupant when it was in the impact direction, including the lateral directions. The relaxed position allowed increased excursion compared to the driving position when the occupant faced rearward, but the magnitude of this increase was lower with lower impact speed.

  1. Disturbance observer based Takagi-Sugeno fuzzy control for an active seat suspension

    Science.gov (United States)

    Ning, Donghong; Sun, Shuaishuai; Zhang, Fei; Du, Haiping; Li, Weihua; Zhang, Bangji

    2017-09-01

    In this paper, a disturbance observer based Takagi-Sugeno (TS) fuzzy controller is proposed for an active seat suspension; both simulations and experiments have been performed verifying the performance enhancement and stability of the proposed controller. The controller incorporates closed-loop feedback control using the measured acceleration of the seat and deflection of the suspension; these two variables can be easily measured in practical applications, thus allowing the proposed controller to be robust and adaptable. A disturbance observer that can estimate the disturbance caused by friction, model simplification, and controller output error has also been used to compensate a H∞ state feedback controller. The TS fuzzy control method is applied to enhance the controller's performance by considering the variation of driver's weight during operation. The vibration of a heavy duty vehicle seat is largest in the frequency range between 2 Hz and 4 Hz, in the vertical direction; therefore, it is reasonable to focus on controlling low frequency vibration amplitudes and maintain the seat suspensions passivity at high frequency. Moreover, both the simulation and experimental results show that the active seat suspension with the proposed controller can effectively isolate unwanted vibration amplitudes below 4.5 Hz, when compared with a well-tuned passive seat suspension. The active controller has been further validated under bump and random road tests with both a 55 kg and a 70 kg loads. The bump road test demonstrated the controller has good transient response capabilities. The random road test result has been presented both in the time domain and the frequency domain. When with the above two loads, the controlled seat suspensions root-mean-square (RMS) accelerations were reduced by 45.5% and 49.5%, respectively, compared with a well-tuned passive seat suspension. The proposed active seat suspension controller has great potential and is very practical for application

  2. Optimization of geometry of annular seat valves suitable for Digital Displacement fluid power pumps/motors

    DEFF Research Database (Denmark)

    Rømer, Daniel; Johansen, Per; Pedersen, Henrik C.

    2013-01-01

    Digital Displacement Fluid Power is an upcoming technology setting new standards for the achievable efficiency of fluid power pumps and motors. The core element of the Digital Displacement technology is high performance electronically controlled seat valves, which must exhibit very low flow...... work an annular seat valve suitable for use in Digital Displacement units is considered, and the ring geometry is optimized using finite element analysis including non-linear material behaviour, contact elements and fluid pressure penetrating load, closely reflecting the actual load of the seat valve...

  3. Airline seat inventory control benefiting from currency differentials to enhance revenues

    Directory of Open Access Journals (Sweden)

    C.E. Love

    2003-12-01

    Full Text Available The purpose of this paper is to develop an airline seat inventory control model which will capitalise on currency differentials that exist between city pairs. The approach taken here is to maximise Expected Marginal Seat Revenues as proposed by Belobaba for non-nested fare classes. the basic Expected Marginal Seat Revenue model is extended to explicitly include the effects of overbooking. Data from the South African Airways return flight between Cape Town and London is utilised to demonstrate the model.

  4. Trajectories of low back pain

    DEFF Research Database (Denmark)

    Axén, Iben; Leboeuf-Yde, Charlotte

    2013-01-01

    Low back pain is not a self-limiting problem, but rather a recurrent and sometimes persistent disorder. To understand the course over time, detailed investigation, preferably using repeated measurements over extended periods of time, is needed. New knowledge concerning short-term trajectories...... indicates that the low back pain 'episode' is short lived, at least in the primary care setting, with most patients improving. Nevertheless, in the long term, low back pain often runs a persistent course with around two-thirds of patients estimated to be in pain after 12 months. Some individuals never have...... low back pain, but most have it on and off or persistently. Thus, the low back pain 'condition' is usually a lifelong experience. However, subgroups of patients with different back pain trajectories have been identified and linked to clinical parameters. Further investigation is warranted...

  5. Design and evaluation of a suspension seat to reduce vibration exposure of subway operators: a case study.

    Science.gov (United States)

    Marcotte, Pierre; Beaugrand, Sylvie; Boutin, Jérôme; Larue, Christian

    2010-01-01

    Subway operators have complained about discomfort caused by whole-body vibration. To address this problem, a suspension seat with extensive ergonomic features has been adapted to the confined space of the subway operator cab. The suspension was modified from an existing suspension in order to reduce the dominant frequency of the subway vertical vibration (2.4 Hz). The suspension seat has been extensively tested on a vertical hydraulic shaker. These tests have shown that the SEAT value was lower for a higher vibration level, for higher subject weight, and for the suspension adjusted at median height. The seat also produces a lower SEAT value when there was a predominance of the 6 Hz vibration component. The horizontal seat adjustments had no influence on the suspension SEAT value. Removing the suspension damper also decreases the SEAT value for all the tested configurations. The final version of the suspension seat prototype was validated during normal subway operation with 19 different operators having weight in the 5th, 50th and 95th percentile of the operator population. Accelerations were measured with triaxial accelerometers at the seat cushion, above the suspension and on the floor. In addition to the vibration measurements, each operator was asked about his perceived discomfort from vibration exposure. Globally, the suspension seat attenuated the vertical vibration (SEAT values from 0.86 to 0.99), but discomfort due to amplification of the 2.4 Hz component occurred when the suspension height was adjusted at the minimum, even when the global weighted acceleration was lower (SEAT value < 1). These results suggest that in order to reduce the discomfort caused by whole-body vibration, the transmissibility of the seat should also be considered, in particular when there is a dominant frequency in the vibration spectra.

  6. Effectiveness of Ford's belt reminder system in increasing seat belt use

    OpenAIRE

    Williams, A; Wells, J; Farmer, C

    2002-01-01

    Objectives: The study investigated the effectiveness in increasing seat belt use of Ford's belt reminder system, a supplementary system that provides intermittent flashing lights and chimes for five minutes if drivers are not belted.

  7. Increasing seat belt use through state-level demonstration projects : a compendium of initial findings

    Science.gov (United States)

    2008-08-01

    This report summarizes the efforts and results from four of six State-level demonstration projects supported with cooperative agreements from the National Highway Traffic Safety Administration. The projects were intended to increase seat belt use sta...

  8. Expanding the seat belt program strategies toolbox: a starter kit for trying new program ideas.

    Science.gov (United States)

    2016-10-01

    The purpose of this research was to explore alternative strategies for increasing seat belt use. Researchers examined behavior : change strategies proven effective in education, healthcare, advertising, and marketing, and they considered how these : ...

  9. Effect of the "Long Term Solution" Seat Pack on Harvard II (CT156) Aircrew Accommodation

    National Research Council Canada - National Science Library

    Murphy, Pierre

    2003-01-01

    ...). A previous study determined that any increase in seat thickness would likely have repercussions on the ability of the taller individuals to see all of the information displayed by the Electronic...

  10. Acquisition: Defense Hotline Allegations Concerning the Procurement of the Seat Management Initiative

    National Research Council Canada - National Science Library

    2002-01-01

    ...) to the development of the Seat Management initiative, We performed the audit in response to allegations made to the Defense Hotline concerning the contracting for the Office of the Assistant Secretary of Defense...

  11. Seat belt, DWI, and other traffic violations among recent immigrants in Florida and Tennessee.

    Science.gov (United States)

    2013-05-01

    Phase I of this project identified two States, Florida and Tennessee, that maintain information on drivers traffic violations and residency status. : Phase II analyzed State databases to examine seat belt nonuse, DWI, and other traffic safety viol...

  12. 76 FR 31453 - Special Conditions: Gulfstream Model GVI Airplane; Single-Occupant Side-Facing Seats

    Science.gov (United States)

    2011-06-01

    ... or furnishing that will support the pelvis, upper arm, chest, and head of an occupant seated next to.... 3. Thoracic Trauma: Thoracic trauma index (TTI) injury criterion must be substantiated by dynamic...

  13. SIT (seated immobility thromboembolism) syndrome: a 21st century lifestyle hazard.

    Science.gov (United States)

    Beasley, Richard; Heuser, Patricia; Raymond, Nigel

    2005-04-01

    The association between prolonged seated immobility and venous thromboembolism (VTE) is well recognised in relation to travel. In this case series, we report the occurrence of deep vein thrombosis (DVT) or pulmonary embolism (PE) following prolonged sitting in relation to work and/or recreation. The cases were characterised by the considerable length of time the individuals sat, the extensive nature of the VTE events in young individuals without other recognised risk factors, and the lack of recognition by the attending doctors of seated immobility as the likely major risk factor. While recognising that the association may be coincidental rather than causal, we propose the acronym 'SIT' (seated immobility thromboembolism) syndrome to encompass all forms of seated immobility associated with VTE.

  14. Comparison of interior crashworthiness observed in passenger train accidents and 8G dynamic seat sled tests

    Science.gov (United States)

    2012-04-17

    The Office of Research and Development of the Federal Railroad Administration conducts engineering research to address protection of passengers and crew during train accidents. This research includes accident investigations and dynamic seat testing t...

  15. The 2007 click it or ticket high-visibility seat belt mobilization : traffic tech.

    Science.gov (United States)

    2010-09-01

    In May 2007 the National Highway Traffic Safety Administration : sponsored the fifth national Click It or Ticket (CIOT) : high-visibility seat belt enforcement mobilization, which followed : the CIOT program model of earned and paid media : publicizi...

  16. Evaluation of the May 2005 Click It or Ticket mobilization to increase seat belt use

    Science.gov (United States)

    2007-05-01

    Click It or Ticket (CIOT) is an intense, short-duration, seat belt publicity and enforcement program. The CIOT May 2005 Mobilization involved approximately $33 million of purchased media. Law enforcement agencies across the Nation reported issuing mo...

  17. 76 FR 14651 - Availability of Seats for the Stellwagen Bank National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2011-03-17

    ... the Stellwagen Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration, Department... applicants for the following seats on the Stellwagen Bank National Marine Sanctuary Advisory Council: (1...

  18. 75 FR 44215 - Availability of Seats for the Stellwagen Bank National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2010-07-28

    ... the Stellwagen Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration, Department... applicants for the following seats on the Stellwagen Bank National Marine Sanctuary Advisory Council: Member...

  19. 75 FR 81224 - Availability of Seats for the Channel Islands National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2010-12-27

    ... the Channel Islands National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Channel Islands National Marine Sanctuary Advisory Council...

  20. 77 FR 33718 - Availability of Seats for the Stellwagen Bank National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2012-06-07

    ... the Stellwagen Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration, Department... applications for the following vacant seats on the Stellwagen Bank National Marine Sanctuary Advisory Council...

  1. 75 FR 9390 - Availability of Seats for the Cordell Bank National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2010-03-02

    ... the Cordell Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Cordell Bank National Marine Sanctuary Advisory Council...

  2. 76 FR 12070 - Availability of Seats for the Gray's Reef National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2011-03-04

    ... the Gray's Reef National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seat on the Gray's Reef National Marine Sanctuary Advisory Council...

  3. 76 FR 12069 - Availability of Seats for the Cordell Bank National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2011-03-04

    ... the Cordell Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Cordell Bank National Marine Sanctuary Advisory Council...

  4. 77 FR 15359 - Availability of Seats for the Stellwagen Bank National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2012-03-15

    ... the Stellwagen Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration, Department... applications for the following vacant seats on the Stellwagen Bank National Marine Sanctuary Advisory Council...

  5. 76 FR 77780 - Availability of Seats for the Fagatele Bay National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2011-12-14

    ... the Fagatele Bay National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Fagatele Bay National Marine Sanctuary Advisory Council...

  6. 76 FR 51953 - Availability of Seats for the Stellwagen Bank National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2011-08-19

    ... the Stellwagen Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration, Department... applicants for the following seat on the Stellwagen Bank National Marine Sanctuary Advisory Council: (2...

  7. 75 FR 3444 - Availability of Seats for the Florida Keys National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2010-01-21

    ... the Florida Keys National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Florida Keys National Marine Sanctuary Advisory Council...

  8. 76 FR 41763 - Availability of Seats for the Fagatele Bay National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2011-07-15

    ... the Fagatele Bay National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Fagatele Bay National Marine Sanctuary Advisory Council...

  9. 76 FR 68428 - Availability of Seats for the Gray's Reef National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2011-11-04

    ... the Gray's Reef National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Gray's Reef National Marine Sanctuary Advisory Council...

  10. 77 FR 66073 - Availability of Seats for the Channel Islands National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2012-11-01

    ... the Channel Islands National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Channel Islands National Marine Sanctuary Advisory Council...

  11. 75 FR 16075 - Availability of Seats for the Fagatele Bay National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2010-03-31

    ... the Fagatele Bay National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Fagatele Bay National Marine Sanctuary Advisory Council...

  12. 75 FR 57442 - Availability of Seats for the Fagatele Bay National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2010-09-21

    ... the Fagatele Bay National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Fagatele Bay National Marine Sanctuary Advisory Council...

  13. 77 FR 27719 - Availability of Seats for the Gray's Reef National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2012-05-11

    ... the Gray's Reef National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Gray's Reef National Marine Sanctuary Advisory Council...

  14. 75 FR 17899 - Availability of Seats for the Gray's Reef National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2010-04-08

    ... the Gray's Reef National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Gray's Reef National Marine Sanctuary Advisory Council...

  15. 75 FR 16074 - Availability of Conservation Seat for the Flower Garden Banks National Marine Sanctuary Advisory...

    Science.gov (United States)

    2010-03-31

    ... Conservation Seat for the Flower Garden Banks National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric... Sanctuary Advisory Council: Conservation. Applicants are chosen based upon their particular expertise and...

  16. 76 FR 66274 - Availability of Seats for the Cordell Bank National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2011-10-26

    ... the Cordell Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Cordell Bank National Marine Sanctuary Advisory Council...

  17. 76 FR 27307 - Availability of Seats for the Gray's Reef National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2011-05-11

    ... the Gray's Reef National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seat on the Gray's Reef National Marine Sanctuary Advisory Council...

  18. 75 FR 17899 - Availability of Seats for the Stellwagen Bank National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2010-04-08

    ... the Stellwagen Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration, Department... applicants for the following seats on the Stellwagen Bank National Marine Sanctuary Advisory Council: Member...

  19. 77 FR 56190 - Availability of Seats for the Fagatele Bay National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2012-09-12

    ... the Fagatele Bay National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seat on the Fagatele Bay National Marine Sanctuary Advisory Council...

  20. Tilted seat position for non-ambulant individuals with neurological and neuromuscular impairment: a systematic review.

    Science.gov (United States)

    Michael, S M; Porter, D; Pountney, T E

    2007-12-01

    To determine the effects of tilt-in-space seating on outcomes for people with neurological or neuromuscular impairment who cannot walk. Search through electronic databases (MEDLINE, Embase, CINAHL, AMED). Discussions with researchers who are active in field. Selection criteria included interventional studies that investigated the effects of seat tilt on outcome or observational studies that identified outcomes for those who had used tilt-in-space seating in populations with neurological or neuromuscular impairments. Two reviewers independently selected trials for inclusion, assessed quality and extracted data. Nineteen studies were identified which fulfilled the selection criteria. Seventeen of these were essentially before-after studies investigating the immediate effects of tilting the seating. All studies looked at populations with neurological impairment, and most were on children with cerebral palsy (n=8) or adults with spinal cord injury (n=8). REVIEWER'S CONCLUSION: Posterior tilt can reduce pressures at the interface under the pelvis.

  1. EVALUATING EXTREMELY LOW FREQUENCY MAGNETIC FIELDS IN THE REAR SEATS OF THE ELECTRIC VEHICLES.

    Science.gov (United States)

    Lin, Jun; Lu, Meng; Wu, Tong; Yang, Lei; Wu, Tongning

    2018-03-23

    In the electric vehicles (EVs), children can sit on a safety seat installed in the rear seats. Owing to their smaller physical dimensions, their heads, generally, are closer to the underfloor electrical systems where the magnetic field (MF) exposure is the greatest. In this study, the magnetic flux density (B) was measured in the rear seats of 10 different EVs, for different driving sessions. We used the measurement results from different heights corresponding to the locations of the heads of an adult and an infant to calculate the induced electric field (E-field) strength using anatomical human models. The results revealed that measured B fields in the rear seats were far below the reference levels by the International Commission on Non-Ionizing Radiation Protection. Although small children may be exposed to higher MF strength, induced E-field strengths were much lower than that of adults due to their particular physical dimensions.

  2. Design Method for Fast Switching Seat Valves for Digital Displacement Machines

    DEFF Research Database (Denmark)

    Roemer, Daniel Beck; Johansen, Per; Pedersen, Henrik C.

    2014-01-01

    corresponding to the piston movement, which has been shown to facilitate superior part load efficiency combined with high bandwidth compared to traditional displacement machines. However, DD machines need fast switching on-off valves with low pressure loss for efficient operation, especially in fast rotating......Digital Displacement (DD) machines are upcoming technology where the displacement of each pressure chamber is controlled electronically by use of two fast switching seat valves. The effective displacement and operation type (pumping/motoring) may be controlled by manipulating the seat valves...... method for DD seat valves are presented, taking into account the significant aspects related to obtaining efficient DD valves with basis in a given DD machine specifications. The seat area is minimized and the stroke length is minimized to obtain fast switching times while considering the pressure loss...

  3. Car child safety seats use among Iranian children in Mashad.

    Science.gov (United States)

    Karbakhsh, Mojgan; Jarahi, Lida

    2016-01-01

    Despite the strong evidence of child safety seats (CSSs) effectiveness in reducing injuries, it is still rarely used in some societies. The purpose of this study was to determine prevalence and predictors of CSS use in Mashad, Iran. Five hundred ninety kindergarten children whose parents owned a car were enrolled in the study. Parents were asked about using CSS for their children, reasons for CSS use/non-use, demographics, history of road traffic injuries and receiving any advice on CSS. Of families, 25.5% expressed that they used CSS for their child at present or any time in the past, but only 6.3% of children travelled restrained in CSS at the time of study. Age-appropriate CSS use was reported in 14.5% of infants and 2.3% of 1-5-year-old children. A significant relationship was observed between lower child age, higher maternal education and high family income with CSS use. The main reasons for CSS none-use were reported as not feeling the need (42%), followed by its high price (22%). Use of CSS was uncommon. The financial concerns and information gap about the essential need for CSS should be considered as priorities for action especially among lower socio-economic groups of society.

  4. Application of YAG laser cladding to the flange seating surface

    International Nuclear Information System (INIS)

    Nakanishi, Koki; Ninomiya, Kazuyuki; Nezaki, Koji

    1999-01-01

    Stainless cladding on carbon steel is usually conducted by shielded metal arc welding (SMAW) or gas tungsten arc welding (GTAW). YAG ( Yttrium-Aluminum-Garnet) laser welding is superior to these methods of welding in the following respects : (1) The heat affected zone (HAZ) is narrower and there is less distortion. (2) YAG laser cladding has the required chemical compositions, even with possibly fewer welding layers under controlled dilution. (3) Greater welding speed. YAG laser cladding application to vessel flange seating surfaces was examined in this study and the results are discussed. The following objectives were carried out : (1) Determination of welding conditions for satisfactory cladding layers and (2) whether cladding would be adequately possible at a cornered section of a stair-like plate, assuming actual flange shape. (3) Measurement of welding distortion and heat affected zone in carbon steel. The welding conditions for producing no-crack deposit with low dilution in carbon steel were clarified and welding by which cladding at cornered section would be possible was achieved. welding distortion by YAG laser was found less than with GTAW and HAZ made by first layer welding could be tempered appropriately by second layer welding. (author)

  5. Thermometry system development for thermoradiotherapy of deep-seated tumours

    Science.gov (United States)

    Fadeev, A. M.; Ivanov, S. M.; Perelstein, E. A.; Polozov, S. M.

    2017-12-01

    Therapeutic hyperthermia (including RF hyperthermia) in combination with radiotherapy (called thermoradiotherapy) is one of widely used contemporary cancer treatment methods. The independent electron linac and RF system or their combinations are necessary for effective therapy. Whole-body hyperthermia is used for treatment of metastatic cancer that was spread throughout the body, regional one is used for treatment of part of the body (for instance leg or abdominal cavity). Local hyperthermia with characteristic size of heating volume of 20-100 mm permits to heat tumour without overheating of healthy tissues. The thermometry of deep suited tissues during the hyperthermia process is an important and complex task. Invasive methods as thermistors, optical sensors or thermo-couples can not be widely used because all of them are able to transport tumor cells to the healthy region of the patient body. Distant methods of the temperature measurement such, as radiothermometry and acoustic thermometry can not be used for tissues seated deeper than 5-7 cm. One of possible ways to solve the problem of temperature measurement of the deep suited tissues is discussed in this article: it was proposed to use the same electrodes for RF hyperthermia and thermometry. As known electrodynamics characteristics of tissues are sufficiently depends on temperature. It was proposed to use this effect for active radiothermometry in local hyperthermia. Two opposite RF dipoles can be used as generator and receiver of pick-up signal.

  6. Enhancement of pressurizer safety valve operability by seating design improvement

    International Nuclear Information System (INIS)

    Moisidis, N.T.; Ratiu, M.D.

    1995-01-01

    Operating conditions specific to pressurizer safety valves (PSVs) have led to numerous problems and have caused industry and NRC concerns regarding the adequacy of spring-loaded self-actuated safety valves for reactor coolant system (RCS) overpressure protection. Specific concerns are: setpoint drift, spurious actuations, and pressure protection. Specific concerns are: setpoint drift, spurious actuations, and leakage. Based on testing and valve construction analysis of a Crosby model 6M6 PSV (Moisidis and Ratiu, 1992), it was established that the primary contributor to the valve problems is a susceptibility to weak seating. To eliminate spring instability, a new spring washer was designed, which guides the spring and precludes its rotation from the reference installed position. Results of tests performed on a prototype PSV equipped with the modified upper spring washer has shown significant improvements in valve operability and a consistent setpoint reproducibility to less than ±1% of the PSV setpoint (testing of baseline, unmodified valve, resulted in a setpoint drift of ± 2%). Enhanced valve operability will result in a significant decrease in operating and maintenance costs associated with valve maintenance and testing. In addition, the enhanced setpoint reproducibility will allow the development of a nitrogen to steam correlation for future in-house PSV testing which will result in further reductions in costs associated with valve testing

  7. Enhancement of pressurizer safety valve operability by seating design improvement

    International Nuclear Information System (INIS)

    Moisidis, N.T.; Ratiu, M.D.

    1994-01-01

    Operating conditions specific to Pressurizer Safety Valves (PSVs) have led to numerous problems and have caused industry and NRC concerns regarding the adequacy of spring loaded self-actuated safety valves for Reactor Coolant System (RCS) overpressure protection. Specific concerns are: setpoint drift, spurious actuations and leakage. Based on testing and valve construction analysis of a Crosby model 6M6 PSV, it was established that the primary contributor to the valve problems is a susceptibility to weak seating. To eliminate spring instability, a new spring washer was designed, which guides the spring and precludes its rotation from the reference installed position. Results of tests performed on a prototype PSV equipped with the modified upper spring washer has shown significant improvements in valve operability and a consistent setpoint reproducibility to less than ±1% of the PSV setpoint (testing of baseline, unmodified valve, resulted in a setpoint drift of ±2%). Enhanced valve operability will result in a significant decrease in operating and maintenance costs associated with valve maintenance and testing. In addition, the enhanced setpoint reproducibility will allow the development of a nitrogen to steam correlation for future in-house PSV testing which will result in further reductions in costs associated with valve testing

  8. A Motion Control of a Robotic Walker for Continuous Assistance during Standing, Walking and Seating Operation

    OpenAIRE

    Chugo, Daisuke; Takase, Kunikatsu

    2010-01-01

    In this paper, we develop an active walker system for standing, walking and seating operation continuously which cooperates the developed standing assistance system with safety and stability. For realizing these conditions, our walker coordinates the assisting position cooperating the standing assistance manipulator according to the posture of the patient. Furthermore, our walker adjusts a seating position when the patient sit down which has high risk for falling down. Using our proposed syst...

  9. Bring back the Glory!

    Directory of Open Access Journals (Sweden)

    James Q. Whitman

    2004-01-01

    Full Text Available This paper, drafted in response to Dr. Kiesow’s question, »Wozu Rechtsgeschichte?«, begins with a backward glance at the nineteenth century, when legal history played a leading role in the intellectual life of the western world. Since those great days, when legal history attracted figures like Karl Marx and Max Weber, the field has fallen on hard times. This is in large part the inevitable consequence of the declining prestige of law itself, which no longer seems to matter in the way that it did in the nineteenth century. Nevertheless, the paper pleads for something of a Return of Grand Theory in legal history. It is true that we can never bring back the glory years. But we can be figures of importance in the public debates of our time if we remain mindful of what it is that gives law itself its enduring social importance. Law reflects, in an unsystematic but telling way, some of the basic value commitments of society-commitments such as the contemporary American commitment to the free market, or the contemporary European commitment to »human dignity«. Law also reflects stylized histories of a given society’s past-histories like that of the American triumph over race slavery, or the European triumph over Nazism. These value commitments and stylized histories are the natural territory of legal historians, who can best claim a role for themselves in public debate if they think of themselves as historians of values, rather than as historians of social realities.

  10. Strong-back safety latch

    International Nuclear Information System (INIS)

    DeSantis, G.N.

    1995-01-01

    The calculation decides the integrity of the safety latch that will hold the strong-back to the pump during lifting. The safety latch will be welded to the strong-back and will latch to a 1.5-in. dia cantilever rod welded to the pump baseplate. The static and dynamic analysis shows that the safety latch will hold the strong-back to the pump if the friction clamps fail and the pump become free from the strong-back. Thus, the safety latch will meet the requirements of the Lifting and Rigging Manual for under the hook lifting for static loading; it can withstand shock loads from the strong-back falling 0.25 inch

  11. The Influence of Tractor-Seat Height above the Ground on Lateral Vibrations

    Directory of Open Access Journals (Sweden)

    Jaime Gomez-Gil

    2014-10-01

    Full Text Available Farmers experience whole-body vibrations when they drive tractors. Among the various factors that influence the vibrations to which the driver is exposed are terrain roughness, tractor speed, tire type and pressure, rear axle width, and tractor seat height above the ground. In this paper the influence of tractor seat height above the ground on the lateral vibrations to which the tractor driver is exposed is studied by means of a geometrical and an experimental analysis. Both analyses show that: (i lateral vibrations experienced by a tractor driver increase linearly with tractor-seat height above the ground; (ii lateral vibrations to which the tractor driver is exposed can equal or exceed vertical vibrations; (iii in medium-size tractors, a feasible 30 cm reduction in the height of the tractor seat, which represents only 15% of its current height, will reduce the lateral vibrations by around 20%; and (iv vertical vibrations are scarcely influenced by tractor-seat height above the ground. The results suggest that manufacturers could increase the comfort of tractors by lowering tractor-seat height above the ground, which will reduce lateral vibrations.

  12. Evaluation of the seat fastening in the frame of a road bus submitted to frontal impact

    Directory of Open Access Journals (Sweden)

    Márcio Walber

    Full Text Available The collective intercity transportation by bus is currently a mean of locomotion much sought after by people. Security in accidents is a very important factor that must be taken into account in design of bus body structure, being the evaluation of passenger safety of this type of vehicle is an important subject that should be checked, because in many accidents occur disconnection between seats and fastening members causing serious passengers injury, often fatal. This work aims at evaluation the behavior of frame fixing of seats of intercity bus bodies, submitted to the frontal impact situation in a rigid wall of 100% offset, through evaluation by finite element method (FEM. This study uses a numerical model corresponding to the body structure and chassis, developed through flexible beam elements, combining with shell elements for the structure of the seats and its fastening members, with the objective of not missing the essential aspects of the problem, allowing the solution with a reduced computational time. The numerical model of bus body and seat was impacted against a rigid wall at a speed of 8.89 m/s, being its validation according to the deceleration curve established by Regulation 80. Then it was gotten the Von Mises stress in fastening members of the seat structure in bus body. It is also presented a proposal to improve the fastening of the seat structure, comparing the results of the stress gotten in the two types fastening submitted to the frontal impact.

  13. Using naturalistic driving data to identify variables associated with infrequent, occasional, and consistent seat belt use.

    Science.gov (United States)

    Reagan, Ian J; McClafferty, Julie A; Berlin, Sharon P; Hankey, Jonathan M

    2013-01-01

    Seat belt use is one of the most effective countermeasures to reduce traffic fatalities and injuries. The success of efforts to increase use is measured by road side observations and self-report questionnaires. These methods have shortcomings, with the former requiring a binary point estimate and the latter being subjective. The 100-car naturalistic driving study presented a unique opportunity to study seat belt use in that seat belt status was known for every trip each driver made during a 12-month period. Drivers were grouped into infrequent, occasional, or consistent seat belt users based on the frequency of belt use. Analyses were then completed to assess if these groups differed on several measures including personality, demographics, self-reported driving style variables as well as measures from the 100-car study instrumentation suite (average trip speed, trips per day). In addition, detailed analyses of the occasional belt user group were completed to identify factors that were predictive of occasional belt users wearing their belts. The analyses indicated that consistent seat belt users took fewer trips per day, and that increased average trip speed was associated with increased belt use among occasional belt users. The results of this project may help focus messaging efforts to convert occasional and inconsistent seat belt users to consistent users. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. "Hot Seat" Questioning: A Technique to Promote and Evaluate Student Dialogue

    Science.gov (United States)

    Crider, Anthony

    Several approaches have been proposed to include students in classroom dialogue, including "think-pair-share" and "talk to your neighbor." I recently implemented an additional technique in which four students answer questions in a "Hot Seat" at the front of the classroom. An unforeseen by-product of this was student-initiated peer instruction outside of the classroom. A small case study (approximately 50 students) on the effect of the Hot Seat using the midterm exam showed that students were 9.5 +/- 3.2% more likely to correctly answer a question related to material covered while they occupied the Hot Seat. Analysis of the Astronomy Diagnostic Test revealed that they were twice as likely to learn their Hot Seat material. A survey revealed one likely reason: Students typically spent 15-60 additional minutes preparing for class on their two assigned Hot Seat dates. Curiously, students received no significant benefit (2.2 +/- 3.6%) from their second turn in the Hot Seat, possibly reflecting student immunization to its motivational pressure.

  15. Tectonics, Deep-Seated Structure and Recent Geodynamics of the Caucasus

    Science.gov (United States)

    Amanatashvili, I.; Adamia, Sh.; Lursmanashvili, N.; Sadradze, N.; Meskhia, V.; Koulakov, I.; Zabelina, I.; Jakovlev, A.

    2012-04-01

    The tectonics and deep-seated structure of the Caucasus are determined by its position between the still converging Eurasian and Africa-Arabian plates, within a wide zone of continental collision. The region in the Late Proterozoic - Early Cenozoic belonged to the Tethys Ocean and its Eurasian and Africa-Arabian margins. During Oligocene-Middle Miocene and Late Miocene-Quaternary time as a result of collision back-arc basins were inverted to form fold-thrust mountain belts and the Transcaucasian intermontane lowlands. The Caucasus is divided into platform and fold-thrust units, and forelands superimposed mainly on the rigid platform zones. The youngest structural units composed of Neogene-Quaternary continental volcanic formations of the Armenian and Javakheti highlands and extinct volcanoes of the Great Caucasus. As a result of detailed geophysical study of the gravity, magnetic, seismic, and thermal fields, the main features of the deep crustal structure of the Caucasus have been determined. Knowledge on the deep lithospheric structure of the Caucasus region is based on surface geology and deep and super deep drilling data combined with gravity, seismic, heat flow, and magnetic investigations. Close correlation between the geology and its deep-seated structures appears in the peculiarities of spatial distribution of gravitational, thermal and magnetic fields, particularly generally expressed in orientation of regional anomalies that is in good agreement with general tectonic structures. In this study we present two tomographic models derived for the region based on two different tomographic approaches. In the first case, we use the travel time data on regional seismicity recorded by networks located in Caucasus. The tomographic inversion is based on the LOTOS code which enables simultaneous determination of P and S velocity distributions and source locations. The obtained model covers the crustal and uppermost mantle depths. The second model, which is constructed

  16. Going back to Java.

    Science.gov (United States)

    Critchfield, R

    1985-01-01

    decline in the death rate, especially in infant mortality, and an increase in life expectancy have meant a rise in annual overall growth back to the present 1.9-2.2%. Despite the present disappointment, Indonesia's government-sponsored family planning campaigns have shown how village culture can be harnessed to promote change.

  17. Peeling Back the Layers

    Science.gov (United States)

    2004-01-01

    NASA's Mars Exploration Rover Spirit took this panoramic camera image of the rock target named 'Mazatzal' on sol 77 (March 22, 2004). It is a close-up look at the rock face and the targets that will be brushed and ground by the rock abrasion tool in upcoming sols. Mazatzal, like most rocks on Earth and Mars, has layers of material near its surface that provide clues about the history of the rock. Scientists believe that the top layer of Mazatzal is actually a coating of dust and possibly even salts. Under this light coating may be a more solid portion of the rock that has been chemically altered by weathering. Past this layer is the unaltered rock, which may give scientists the best information about how Mazatzal was formed. Because each layer reveals information about the formation and subsequent history of Mazatzal, it is important that scientists get a look at each of them. For this reason, they have developed a multi-part strategy to use the rock abrasion tool to systematically peel back Mazatzal's layers and analyze what's underneath with the rover's microscopic imager, and its Moessbauer and alpha particle X-ray spectrometers. The strategy began on sol 77 when scientists used the microscopic imager to get a closer look at targets on Mazatzal named 'New York,' 'Illinois' and 'Arizona.' These rock areas were targeted because they posed the best opportunity for successfully using the rock abrasion tool; Arizona also allowed for a close-up look at a range of tones. On sol 78, Spirit's rock abrasion tool will do a light brushing on the Illinois target to preserve some of the surface layers. Then, a brushing of the New York target should remove the top coating of any dust and salts and perhaps reveal the chemically altered rock underneath. Finally, on sol 79, the rock abrasion tool will be commanded to grind into the New York target, which will give scientists the best chance of observing Mazatzal's interior. The Mazatzal targets were named after the home states of

  18. Attitudes towards child restrains and seat belts usage in the learned population of Karachi, Pakistan.

    Science.gov (United States)

    Siddiqui, Emaduddin; Ejaz, Kiran; Waheed, Shahan; Kazi, Ghazala Irfan; Khursheed, Munawar

    2014-01-01

    Motor vehicles crashes (MVCs) are the leading cause of injury related morbidity and mortality in developed countries. Recent evidence proves that properly used child seat belts can dramatically reduce the risk of severe and life-threatening injury from MVCs. There are rarities of thought and inspiration regarding the use of child seat belts in our society and region, therefore we lack of data regarding factors and paucity of usage of child seat belts in motor vehicles. This study aimed to assess the knowledge and attitudes of child seat belt usage among the educated population in Karachi, Pakistan. Altogether 304 employees were investigated. They were employees of Aga Khan University who were using their cars and having children younger than 10 years old. A cross sectional observational study was designed, and a 36-item questionnaire in English was used to collect data on participants' demographic details, designation, educational level, economic status, validity of driving license, number of children and cars, availability of adult seat belts and child seat belts along with their functionality, awareness, knowledge and attitude toward its use, and reason of not using these devices. SPSS version 20 for Windows was used to analyze the data and the Chi-square test was used. Totally 290 participants were recruited with a response rate of 72% (212). Of 212 participants, 126 (59%) were male. 154 (72.6%) participants had valid driver licenses, and 154 (72.6%) had adult seat belts in their vehicles. Only 32 (15%) reported regular use of adult seat belts. Although 168 (79.2%) participants had some knowledge about child restrains (CRs), only 65 (22%) had CRs in their cars. Eighty-two (38.7%) participants got the knowledge about CRs and seat belts from media. Mothers were more concerned about the use of CRs than fathers. Only 14 (6.6%) parents were found to use both adult and child seat belts all the time. Of the 157 parents who did not us use CRs, 42 considered unnecessary

  19. Expansion effects on back-to-back correlations

    Energy Technology Data Exchange (ETDEWEB)

    Padula, S.S.; Krein, G. [Instituto de Fisica Teorica (IFT), Sao Paulo, SP (Brazil)]. E-mail: padula@ift.unesp.br; Csoerg, T.; Panda, P.K. [Central Research Institute for Physics (KFKI), Budapest (Hungary). Research Institute for Particle and Nuclear Physics (RMKI); Hama, Y. [Santa Catarina Univ., Florianopolis, SC (Brazil). Centro de Ciencias Fisicas e Matematicas. Dept. de Fisica

    2004-07-01

    The back-to-back correlations (BBC) of particle-antiparticle pairs, signalling in-medium mass modification, are studied in a finite size thermalized medium. The width of BBC function is explicitly evaluated in the case of a nonrelativistic spherically symmetric expanding fireball. The effect of the flow is to reduce the BBC signal as compared to the case of non flow. Nevertheless, a significant signal survives finite-time emission plus expansion effects. (author)

  20. Expansion effects on back-to-back correlations

    International Nuclear Information System (INIS)

    Padula, S.S.; Krein, G.; Csoerg, T.; Panda, P.K.; Hama, Y.

    2004-01-01

    The back-to-back correlations (BBC) of particle-antiparticle pairs, signalling in-medium mass modification, are studied in a finite size thermalized medium. The width of BBC function is explicitly evaluated in the case of a nonrelativistic spherically symmetric expanding fireball. The effect of the flow is to reduce the BBC signal as compared to the case of non flow. Nevertheless, a significant signal survives finite-time emission plus expansion effects. (author)

  1. Expansion Effects on Back-to-Back Correlations

    International Nuclear Information System (INIS)

    Padula, S.S.; Krein, G.; Csoergo, T.; Hama, Y.; Panda, P.K.

    2004-01-01

    The back-to-back correlations (BBC) of particle-antiparticle pairs, signalling in-medium mass modification, are studied in a finite size thermalized medium. The width of BBC function is explicitly evaluated in the case of a nonrelativistic spherically symmetric expanding fireball. The effect of the flow is to reduce the BBC signal as compared to the case of non flow. Nevertheless, a significant signal survives finite-time emission plus expansion effects

  2. Newborn Parent Based Intervention to Increase Child Safety Seat Use

    Directory of Open Access Journals (Sweden)

    Xiangxiang Liu

    2016-08-01

    Full Text Available This paper intends to assess the effect of a maternity department intervention on improvement of knowledge and use of child safety seats (CSS among newborn parents. An intervention study included three groups (one education plus free CSS intervention group, one education only group, and one control group. The participants were parents of newborns in the maternity department of two hospitals. Both of the intervention groups received a folded pamphlet of child passenger safety, a height chart and standardized safety education during their hospital stay after giving birth. The education plus free CSS intervention group received an additional free CSS and professional installation training at hospital discharge. The control group received a pamphlet with educational information about nutrition and food safety. Three months after enrollment, a telephone follow-up was conducted among participants in the three groups. Data on child passenger safety knowledge, risky driving behaviors, and use of CSS were evaluated before and after the intervention. A total of 132 newborn parents were enrolled in the study; of those, 52 (39.4% were assigned into the education plus free CSS intervention group, 44 (33.3% were in the education intervention only group, and 36 (27.3% were in the control group. No significant differences existed in demographics among the three groups. There was a significant difference in newborn parents’ child passenger safety knowledge and behaviors in the three groups before and after the intervention. In addition, the CSS use increased significantly in the education plus free CSS group after the intervention compared to parents in the education only or control groups. Education on safety, combined with a free CSS and professional installation training, were effective at increasing newborn parents’ knowledge and use of CSS. Future studies with larger sample sizes and longer follow-up are needed to determine a long-term effect of the

  3. Newborn Parent Based Intervention to Increase Child Safety Seat Use

    Science.gov (United States)

    Liu, Xiangxiang; Yang, Jingzhen; Cheng, Fuyuan; Li, Liping

    2016-01-01

    This paper intends to assess the effect of a maternity department intervention on improvement of knowledge and use of child safety seats (CSS) among newborn parents. An intervention study included three groups (one education plus free CSS intervention group, one education only group, and one control group). The participants were parents of newborns in the maternity department of two hospitals. Both of the intervention groups received a folded pamphlet of child passenger safety, a height chart and standardized safety education during their hospital stay after giving birth. The education plus free CSS intervention group received an additional free CSS and professional installation training at hospital discharge. The control group received a pamphlet with educational information about nutrition and food safety. Three months after enrollment, a telephone follow-up was conducted among participants in the three groups. Data on child passenger safety knowledge, risky driving behaviors, and use of CSS were evaluated before and after the intervention. A total of 132 newborn parents were enrolled in the study; of those, 52 (39.4%) were assigned into the education plus free CSS intervention group, 44 (33.3%) were in the education intervention only group, and 36 (27.3%) were in the control group. No significant differences existed in demographics among the three groups. There was a significant difference in newborn parents’ child passenger safety knowledge and behaviors in the three groups before and after the intervention. In addition, the CSS use increased significantly in the education plus free CSS group after the intervention compared to parents in the education only or control groups. Education on safety, combined with a free CSS and professional installation training, were effective at increasing newborn parents’ knowledge and use of CSS. Future studies with larger sample sizes and longer follow-up are needed to determine a long-term effect of the intervention. PMID

  4. Impact of Active Climate Control Seats on Energy Use, Fuel Use, and CO2 Emissions

    Energy Technology Data Exchange (ETDEWEB)

    Kreutzer, Cory J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Rugh, John P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Titov, Eugene V [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kekelia, Bidzina [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-11-28

    A project was developed through collaboration between Gentherm and NREL to determine the impact of climate control seats for light-duty vehicles in the United States. The project used a combination of experimentation and analysis, with experimental results providing critical input to the analysis process. First, outdoor stationary vehicle testing was performed at NREL's facility in Golden, CO using multiple occupants. Two pre-production Ford Focus electric vehicles were used for testing; one containing a standard inactive seat and the second vehicle containing a Gentherm climate control seat. Multiple maximum cool-down and steady-state cooling tests were performed in late summer conditions. The two vehicles were used to determine the increase in cabin temperature when using the climate control seat in comparison to the baseline vehicle cabin temperature with a standard seat at the equivalent occupant whole-body sensation. The experiments estimated that on average, the climate control seats allowed for a 2.61 degrees Celsius increase in vehicle cabin temperature at equivalent occupant body sensation compared to the baseline vehicle. The increased cabin air temperature along with their measured energy usage were then used as inputs to the national analysis process. The national analysis process was constructed from full vehicle cabin, HVAC, and propulsion models previously developed by NREL. In addition, three representative vehicle platforms, vehicle usage patterns, and vehicle registration weighted environmental data were integrated into the analysis process. Both the baseline vehicle and the vehicle with climate control seats were simulated, using the experimentally determined cabin temperature offset of 2.61degrees Celsius and added seat energy as inputs to the climate control seat vehicle model. The U.S. composite annual fuel use savings for the climate control seats over the baseline A/C system was determined to be 5.1 gallons of gasoline per year per

  5. A joint econometric analysis of seat belt use and crash-related injury severity.

    Science.gov (United States)

    Eluru, Naveen; Bhat, Chandra R

    2007-09-01

    This paper formulates a comprehensive econometric structure that recognizes two important issues in crash-related injury severity analysis. First, the impact of a factor on injury severity may be moderated by various observed and unobserved variables specific to an individual or to a crash. Second, seat belt use is likely to be endogenous to injury severity. That is, it is possible that intrinsically unsafe drivers do not wear seat belts and are the ones likely to be involved in high injury severity crashes because of their unsafe driving habits. The preceding issues are considered in the current research effort through the development of a comprehensive model of seat belt use and injury severity that takes the form of a joint correlated random coefficients binary-ordered response system. To our knowledge, this is the first instance of such a model formulation and application not only in the safety analysis literature, but in the econometrics literature in general. The empirical analysis is based on the 2003 General Estimates System (GES) data base. Several types of variables are considered to explain seat belt use and injury severity levels, including driver characteristics, vehicle characteristics, roadway design attributes, environmental factors, and crash characteristics. The results, in addition to confirming the effects of various explanatory variables, also highlight the importance of (a) considering the moderating effects of unobserved individual/crash-related factors on the determinants of injury severity and (b) seat belt use endogeneity. From a policy standpoint, the results suggest that seat belt non-users, when apprehended in the act, should perhaps be subjected to both a fine (to increase the chances that they wear seat belts) as well as mandatory enrollment in a defensive driving course (to attempt to change their aggressive driving behaviors).

  6. Injury severity and seating position in accidents with German EMS helicopters.

    Science.gov (United States)

    Hinkelbein, Jochen; Spelten, Oliver; Neuhaus, Christopher; Hinkelbein, Mandy; Özgür, Enver; Wetsch, Wolfgang A

    2013-10-01

    Accident rates and fatality rates for Helicopter Emergency Medical Service (HEMS) missions have been investigated recently, but none of these studies considered the influence of the seating position in the helicopter. The aim of the present descriptive and observational study was to analyze injury severity depending on the seating position during HEMS accidents in Germany. Data from the German Federal Agency for Flight Accident Investigation was gathered for a period of 40 years (from 1970 to 2009). The seating position in the aircraft during the accident and the resulting injury severity (i.e., 1=no; 2=slight; 3=severe; and 4=fatal) were recorded. Injury severity was compared using the Fisher's exact test. P values accidents were investigated (n=61 accidents did not lead to any injuries in the occupants, n=7 accidents resulted in minor, and n=6 in severe injuries, and lethal injuries resulted from n=15 accidents). The occupant in the "patient" position was most likely to suffer from deadly injuries (44.9%), followed by the HEMS crew member rear seat (25.0%), compared to lower lethality rates in the other seating positions (9.4-11.2%). Sitting on the HEMS crew member rear seat also was associated with the highest percentage of severe and minor injuries (12.5% each). In HEMS accidents, the patients' position and the HEMS crew member rear seat were found to be at the highest risk for fatal or severe injuries. These results support the urgent requirement of a large international data base for HEMS accidents as a basis for further studies to improve the safety in HEMS missions. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. Compliance with Use of Seat Belt among Commercial Drivers in a Nigerian Community

    Directory of Open Access Journals (Sweden)

    Oluwole C. Omolase

    2012-06-01

    Full Text Available AIM: This study aimed at determining compliance with use of seat belt among commercial intercity drivers. METHOD: This is a descriptive cross-sectional study conducted in Owo, South West Nigeria among commercial intercity drivers between June and September, 2009. Ethical clearance was obtained from the Ethical Review Committee of Federal Medical Centre, Owo, Ondo State, Nigeria prior to commencement of this study. The permission of the leadership of Road Transport Workers’ Union was also sought and obtained. Ninety intercity commercial drivers out of the estimated one hundred and sixty intercity commercial drivers in the community were enrolled in this study. Informed consent was obtained from each of the respondents. The data obtained was collated and analyzed with SPSS 15.0.1 statistical soft ware version. RESULTS: Ninety respondents were enrolled in this study. The driving experience of the respondents revealed that most respondents: 53 (58.9% had more than 20 years driving experience. Most respondents;78 (86.7% complied with use of seat belt .The main barrier to compliance with seat belt was short trip;28 (50.9%.Most respondents; 67 (74.4%were in support of penalization of defaulters. The major source of awareness about seat belt was Federal Road Safety Corps;59 (65.6%. CONCLUSION: Most respondents complied with use of seat belt. The major barrier to compliance with seat belt was short trip within the community. The Federal Road Safety Corps should enforce compliance with the use of seat belt most especially within communities. [TAF Prev Med Bull 2012; 11(3.000: 281-286

  8. The Limits to Giving Back

    Directory of Open Access Journals (Sweden)

    Jade S. Sasser

    2014-07-01

    Full Text Available In this thematic section, authors consider the limitations on giving back that they faced in field research, or saw others face. For some authors, their attempts at giving back were severely limited by the scope of their projects, or their understandings of local cultures or histories. For others, very specific circumstances and historical interventions of foreigners in certain places can limit how and to what extent a researcher is able to have a reciprocal relationship with the participating community. Some authors, by virtue of their lesser positions of power relative to those that they were studying, simply decided not to give back to those communities. In each article it becomes apparent that how and in what ways people give back is unique (and limited both to their personal values and the contexts in which they do research.

  9. Epidemiology of low back pain.

    Science.gov (United States)

    Skovron, M L

    1992-10-01

    At present, although there have been many epidemiological studies of risk factors for low back pain, there are few risk factors established in prospective studies; and our understanding of them remains relatively crude. Individuals in jobs requiring manual materials handling, particularly repeated heavy lifting and lifting while twisting, are at increased risk of back pain leading to work absence. In addition, exposure to whole-body vibration and job requirements for static postures are associated with back pain. Individual trunk strength has not been consistently demonstrated as associated with back pain; although there is some suggestion that when work requirements for heavy lifting exceed individual capacities, back pain is more likely to occur. The pattern of peak age at onset in the 20's is consistent with back pain development early in working life. Among other individual characteristics, only cigarette smoking has consistently been associated with back pain; and the biological mechanism for this finding is not understood. Evidence with respect to spinal flexibility, aerobic capacity, educational attainment and other variables is suggestive but not consistent. There is some evidence that the individual's relation to work, expressed as job satisfaction or supervisor rating, is also related to work absence due to back pain. While it is possible to describe, however crudely, the characteristics placing people at risk for back pain leading to work absence and/or medical attention, the problem of predicting chronicity and thus identifying patients for more intensive clinical intervention remains unresolved. At this time, only age of the patient and certain clinical features of the back pain such as the presence of sciatic symptoms, duration of the current episode, and history of prior episodes are consistently demonstrated predictors. In chronic patients, there is suggestive evidence that spinal flexibility, trunk strength, and certain psychological

  10. Modeling and Analysis of Static and Dynamic Characteristics of Nonlinear Seat Suspension for Off-Road Vehicles

    OpenAIRE

    Yan, Zhenhua; Zhu, Bing; Li, Xuefei; Wang, Guoqiang

    2015-01-01

    Low-frequency vibrations (0.5–5 Hz) that harm drivers occur in off-road vehicles. Thus, researchers have focused on finding methods to effectively isolate or control low-frequency vibrations. A novel nonlinear seat suspension structure for off-road vehicles is designed, whose static characteristics and seat-human system dynamic response are modeled and analyzed, and experiments are conducted to verify the theoretical solutions. Results show that the stiffness of this nonlinear seat suspension...

  11. An Ergonomic Desk and Chair Prototype to Improve Seating Position on Senior High School Students at Kabupaten Gresik

    Directory of Open Access Journals (Sweden)

    Neffrety Nilamsari

    2015-04-01

    chair N, length = 48 cm, wide = 43 cm, cushion base’s height from floor surfaces = 47 cm, bag keeper’s height from floor surfaces =3cm, bag keeper’s wide= 43 cm, bag keeper’s length = 47 cm, cushion’s wide = 41 cm, cushion’s length = 46cm, handrest’s height = 22 cm, handrest’s length = 30 cm, backrest’s height = 38 cm, backrest’s wide = 43 cm, cushion’s foam thickness = 4 cm, backrest’s foam thickness = 4 cm; 2 Prototype desk N, length = 50 cm, wide = 66 cm, back section’s height = 85 cm, front section’s height = 75 cm, footrest from fl oor surfaces = 10 cm, drawer’s height = 10cm, front bamper’s height = 40 cm, and table’s angle = 10o. Discussion: An ergonomic desks and chairs are very important for students at school, it will help teaching learning process run well and comfortable. The measurement of desk and chair must be reviewed after fi ve years, because of student’s anthropometric development. So then students will feel no fatigue. Keywords: ergonomy, senior high school student’s seating position

  12. Reliability and Validity of a New Method for Isometric Back Extensor Strength Evaluation Using A Hand-Held Dynamometer.

    Science.gov (United States)

    Park, Hee-Won; Baek, Sora; Kim, Hong Young; Park, Jung-Gyoo; Kang, Eun Kyoung

    2017-10-01

    To investigate the reliability and validity of a new method for isometric back extensor strength measurement using a portable dynamometer. A chair equipped with a small portable dynamometer was designed (Power Track II Commander Muscle Tester). A total of 15 men (mean age, 34.8±7.5 years) and 15 women (mean age, 33.1±5.5 years) with no current back problems or previous history of back surgery were recruited. Subjects were asked to push the back of the chair while seated, and their isometric back extensor strength was measured by the portable dynamometer. Test-retest reliability was assessed with intraclass correlation coefficient (ICC). For the validity assessment, isometric back extensor strength of all subjects was measured by a widely used physical performance evaluation instrument, BTE PrimusRS system. The limit of agreement (LoA) from the Bland-Altman plot was evaluated between two methods. The test-retest reliability was excellent (ICC=0.82; 95% confidence interval, 0.65-0.91). The Bland-Altman plots demonstrated acceptable agreement between the two methods: the lower 95% LoA was -63.1 N and the upper 95% LoA was 61.1 N. This study shows that isometric back extensor strength measurement using a portable dynamometer has good reliability and validity.

  13. Factors associated with rear seating of children in motor vehicles: a study in two low-income, predominantly Hispanic communities.

    Science.gov (United States)

    Greenberg-Seth, Jennifer; Hemenway, David; Gallagher, Susan S; Lissy, Karen S; Ross, Julie B

    2004-07-01

    This study examined child seating patterns in two predominantly low-income, Hispanic communities in Massachusetts. The purpose was to determine the factors associated with child rear seating in the community as a whole and for a subset of Hispanic motorists. Five hundred and five vehicles carrying child passengers and no adult other than the driver were observed in parking lots of fast food restaurants and grocery stores. Four hundred and thirty-two vehicle drivers agreed to be interviewed. A child was defined as a passenger younger than age 12 as determined by appearance and height (head below the vehicle headrest when seated). Variables under study included driver gender, age, ethnicity, and educational attainment; driver shoulder belt use; driver perception of passenger-side airbag presence; and the number and ages of children in the car. Overall, 51% of vehicles were observed with all children seated in the rear. In a bivariate analysis, child rear seating was strongly associated with female drivers ( P = 0.01), younger drivers ( P = 0.02) driver shoulder belt use ( P safety behavior (e.g. seat belt use). Messages should be culturally appropriate and should emphasize driver seat belt use in conjunction with rear seating and the importance of rear seating regardless of the presence of a passenger-side airbag.

  14. Feasibility study for the development and marketing of magnesium seats for motor coaches and other modes of public transit

    Energy Technology Data Exchange (ETDEWEB)

    Bergeron, F. [IC-2 Technologies Inc., Quebec City, PQ (Canada); Audet, J.F. [J-F Audet Courtier Stratege, Carignan, PQ (Canada)

    2004-06-01

    Magnesium is currently used for seats in many minivans and luxury cars, as well as in some high speed trains. This paper addresses concerns about the use of magnesium in manufacturing seats for public transit vehicles. This paper aimed to validate the feasibility of magnesium and/or aluminum passenger seats and determine if they met weight and cost reduction objectives currently set by the public transportation industry. An assessment of the North American bus and motor coach market was made, and passenger seat design standards were reviewed. Additionally, magnesium samples were tested to ensure industry standards for material flammability and toxic fumes emissions during exposure to intense heat. Corrosion testing and a comparison with automobile industry tests were made. A number of manufacturing case studies were conducted, including life-cycle costs and comparisons with the manufacture of traditional steel seats. It was concluded that a lighter-weight seat is both technically possible and economically viable. In terms of flammability, magnesium seats met all required industry standards, and when combined with excellent seat design, increased the safety of seat occupants projected forward during collisions. In addition, magnesium's ability to absorb vibration was seen as a substantial benefit in terms of passenger comfort. In terms of manufacturing cost alone, a magnesium-aluminum hybrid was recommended. 15 refs., 25 tabs., 24 figs.

  15. Research Paper: Impact of Air Seat Cushions and Ball Chairs on Classroom Behavior of Students with Autism Spectrum Disorder

    Directory of Open Access Journals (Sweden)

    Nader Matin Sadr

    2016-07-01

    Conclusion In the present study, therapy balls and or cushioned chairs for ASD students facilitated in-seat and on-task behaviors and improved classroom performance. It seems that using these alternative seating chairs can satisfy the subjects’ needs to sensory stimuli, and therefore, decreases their sensory seeking behaviors which interferes with their academic achievements. While, using therapy ball chairs for these students may facilitate in-seat behavior and decrease autistic behavior in class, the student’s response to dynamic seating is different individually. Therefore, chair selection must be based on vestibular reaction of the students.

  16. Spinal Manipulation for Low-Back Pain

    Science.gov (United States)

    ... V W X Y Z Spinal Manipulation for Low-Back Pain Share: On This Page Introduction Key Points About ... will help ensure coordinated and safe care. About Low-Back Pain Back pain is one of the most common ...

  17. Inversion Therapy: Can It Relieve Back Pain?

    Science.gov (United States)

    Inversion therapy: Can it relieve back pain? Does inversion therapy relieve back pain? Is it safe? Answers from Edward R. Laskowski, M.D. Inversion therapy doesn't provide lasting relief from back ...

  18. On the Modeling of a MEMS Based Capacitive Accelerometer for Measurement of Tractor Seat Vibration

    Directory of Open Access Journals (Sweden)

    M. Alidoost

    2010-04-01

    Full Text Available Drivers of heavy vehicles often face with higher amplitudes of frequencies range between 1-80 Hz. Hence, this range of frequency results in temporary or even sometimes permanent damages to the health of drivers. Examples for these problems are damages to the vertebral column and early tiredness, which both reduce the driver’s performance significantly. One solution to this problem is to decrease the imposed vibration to the driver’s seat by developing an active seat system. These systems require an online measuring unit to sense vibrations transferred to the seat. The measuring unit can include a capacitive micro-accelerometer on the basis of MEMS which measure online vibrations on the seat. In this study, the mechanical behavior of a capacitive micro-accelerometer for the vibration range applied to a tractor seat has been simulated. The accelerometer is capable to measure step, impact and harmonic external excitations applied to the system. The results of the study indicate that, with increasing the applied voltage, the system sensitivity also increases, but the measuring range of vibrations decreases and vice versa. The modeled accelerometer, at damping ratio of 0.67 is capable to measure accelerations within the frequency range of lower than 130 Hz.

  19. Evaluating the impact of child safety seat check-up events on parental knowledge.

    Science.gov (United States)

    Herring, Ashley B; Jones, Ches; Nunez, Casandra

    2002-12-01

    Riding unrestrained is the greatest risk factor for death and injury among children in motor vehicles. Restraining a child can reduce the risk of death for that child by up to 71%. However, despite increased awareness, child safety seat usage rates are still disturbingly low. The purpose of this study was to evaluate the impact that child safety seat check-up events have on parental knowledge on child safety seats and installation. The subjects for this study were 101 parents/caregivers who attended child safety seat check-up events in northwest Arkansas from May 2000 through June 2001. A 20-item survey was conducted via the telephone. Results showed that the check-up events in northwest Arkansas have had an impact on self-efficacy. The participants of the events were primarily Caucasian and females in the 30-34 age group. Nine of 10 subjects scored in the high knowledge category. Conclusions are that check-up events do have an impact on parental knowledge and are accepted by the target group. Additionally, participants believed that car seats are of great importance and do protect their children in the event of a crash.

  20. Towards evidence-based classification in wheelchair sports: impact of seating position on wheelchair acceleration.

    Science.gov (United States)

    Vanlandewijck, Yves C; Verellen, Joeri; Tweedy, Sean

    2011-07-01

    In most Paralympic wheelchair sports, active trunk range of movement is assessed by observing shoulder girdle excursion during active trunk movements and is a key determinant of an athlete's class. However, to date research evaluating the impact of reduced trunk range of movement on wheelchair sports performance has not been conducted. In the present study, 15 non-disabled male participants performed two 20-s sprints on a wheelchair ergometer in each of three seating positions. Positions were typical of those used to enhance sitting stability in wheelchair sport and each impacted available trunk range of movement differently: condition-90 (seated with thighs horizontal; unrestricted range of movement) condition-45 (seated with thighs in 45°), and condition-0 (seated with hips maximally flexed; minimum range of movement). In condition-90, the trunk only actively contributed to the first push; for the remainder of the sprint, the trunk was held almost isometrically at 48.2° to the horizontal (range 42.1-56.4°). Similar patterns were observed for both condition-45 and condition-0. Compared with condition-90, participants in condition-0 had reduced capacity to accelerate of statistical (P sports performance, including strapping, seating position, and impairments of trunk muscle power and coordination.

  1. Experimental Investigation of a Temperature-Controlled Car Seat Powered by an Exhaust Thermoelectric Generator

    Science.gov (United States)

    Du, H.; Wang, Y. P.; Yuan, X. H.; Deng, Y. D.; Su, C. Q.

    2016-03-01

    To improve the riding comfort and rational utilization of the electrical energy captured by an automotive thermoelectric generator (ATEG), a temperature-controlled car seat was constructed to adjust the temperature of the car seat surface. Powered by the ATEG and the battery, the seat-embedded air conditioner can improve the riding comfort using a thermoelectric device to adjust the surface temperature of the seat, with an air duct to regulate the cold side and hot side of the thermoelectric device. The performance of the thermoelectric cooler (TEC) and theoretical analysis on the optimum state of the TEC device are put forward. To verify the rationality of the air duct design and to ensure sufficient air supply, the velocity field of the air duct system was obtained by means of the finite element method. To validate the reliability of the numerical simulation, the air velocity around the thermoelectric device was measured by a wind speed transmitter. The performance of the temperature-controlled car seat has been validated and is in good agreement with bench tests and real vehicle tests.

  2. A cost benefit analysis of an enhanced seat belt enforcement program in South Africa.

    Science.gov (United States)

    Harris, G T; Olukoga, I A

    2005-04-01

    To examine whether a program to increase the wearing of seat belts in a South African urban area would be worthwhile in societal terms. A cost benefit analysis of a one year enhanced seat belt enforcement program in eThekwini (Durban) Municipality. Data were drawn from two main sources--a 1998 study of the cost of road crashes in South Africa and, given the absence of other data, a meta-analysis of the effectiveness of various types of interventions to reduce road crash casualties in the United States--and were analyzed using cost benefit analysis. A program designed to enforce greater wearing of seat belts, estimated to cost 2 million rand in one year, could be reasonably expected to increase seat belt usage rates by 16 percentage points and reduce fatalities and injuries by 9.5%. This would result in saved social costs of 13.6 million rand in the following year or a net present value of 11.6 million rand. There would also be favorable consequences for municipal finances. Investment in a program to increase seat belt wearing rates is highly profitable in societal terms.

  3. Analysis of WBV on standing and seated passengers during off-peak operation in KL monorail

    Science.gov (United States)

    Hasnan, K.; Bakhsh, Q.; Ahmed, A.; Ali, D.; Jamali, A. R.

    2018-03-01

    In this study, the Whole-Body Vibration (WBV) was analyzed on the standing and seated passenger during off-peak operating hours when train was on the track. The experiments were conducted on two car train at one constant location (bogie-1, which is near to driver’s cabin) during downward direction from KL sentral station towards Titiwangsa station. The aim of this study was to analyze that, in which posture of passenger’s exposures the maximum level of WBV. Since, one passenger was performed the whole journey in standing posture whereas, the other passenger was in seated posture. The result obtained from experiments for the RMS accelerations (Arms), maximum acceleration (Amax) and minimum acceleration (Amin) during the trip. As per standard ISO 2631-1, the daily vibration exposure (A8), Vibration Dose value (VDV) and Crest Factor (CF) of this trip for both standing and sitting orientations were calculated. Results shows that the seated passenger was exposed to longer periods of continuous vibration as compared to the standing passenger. Whereas, the Vibration Dose value (VDV) value was greater than the action value as per ISO 2631-1 and within the limit values. The study concluded that whole body vibration transmitted towards both passengers either standing or seated during their journey. But in overall results comparison of both orientations, the seated passengers gained higher vibration than the standing one.

  4. Flow Characteristics and Sizing of Annular Seat Valves for Digital Displacement Machines

    Directory of Open Access Journals (Sweden)

    Christian Nørgård

    2018-01-01

    Full Text Available This paper investigates the steady-state flow characteristics and power losses of annular seat valves for digital displacement machines. Annular seat valves are promising candidates for active check-valves used in digital displacement fluid power machinery which excels in efficiency in a broad operating range. To achieve high machine efficiency, the valve flow losses and the required electrical power needed for valve switching should be low. The annular valve plunger geometry, of a valve prototype developed for digital displacement machines, is parametrized by three parameters: stroke length, seat radius and seat width. The steady-state flow characteristics are analyzed using static axi-symmetric computational fluid dynamics. The pressure drops and flow forces are mapped in the valve design space for several different flow rates. The simulated results are compared against measurements using a valve prototype. Using the simulated maps to estimate the flow power losses and a simple generic model to estimate the electric power losses, both during digital displacement operation, optimal designs of annular seat valves, with respect to valve power losses, are derived under several different operating conditions.

  5. The effect of a backrest and seatpan inclination on sitting discomfort and trunk muscle activation in subjects with extension-related low back pain.

    Science.gov (United States)

    Curran, Máire; Dankaerts, Wim; O'Sullivan, Peter; O'Sullivan, Leonard; O'Sullivan, Kieran

    2014-01-01

    Few studies have demonstrated that seating modifications reduce low back pain (LBP). One recent study found that a forward-inclined seatpan reduced low back discomfort (LBD), however this was only examined in people with flexion-related LBP. No study has yet investigated its effectiveness among people with extension-related LBP. This crossover study examined 12 subjects with extension-related LBP. Sitting discomfort and surface electromyography of three trunk muscles were recorded during a 10-minute typing task while sitting with two different seatpan inclinations, both with and without a backrest. LBD (p ergonomics prescriptions according to the individual presentation of people with LBP.

  6. Concepts and embodiment design of a reentry recumbent seating system for the NASA Space Shuttle

    Science.gov (United States)

    Mcmillan, Scott; Looby, Brent; Devany, Chris; Chudej, Chris; Brooks, Barry

    1993-01-01

    This report deals with the generation of a recumbent seating system which will be used by NASA to shuttle astronauts from the Russian space station Mir. We begin by examining the necessity for designing a special couch for the returning astronauts. Next, we discuss the operating conditions and constraints of the recumbent seating system and provide a detailed function structure. After working through the conceptual design process, we came up with ten alternative designs which are presented in the appendices. These designs were evaluated and weighted to systematically determine the best choice for embodiment design. A detailed discussion of all components of the selected system follows with design calculations for the seat presented in the appendices. The report concludes with an evaluation of the resulting design and recommendations for further development.

  7. Wheelchair Seating Assessment and Intervention: A Comparison Between Telerehabilitation and Face-to-Face Service

    Science.gov (United States)

    Barlow, Ingrid G; Liu, Lili; Sekulic, Angela

    2009-01-01

    This study compared outcomes of wheelchair seating and positioning interventions provided by telerehabilitation (n=10) and face-to-face (n=20; 10 in each of two comparison groups, one urban and one rural). Comparison clients were matched to the telerehabilitation clients in age, diagnosis, and type of seating components received. Clients and referring therapists rated their satisfaction and identified if seating intervention goals were met. Clients recorded travel expenses incurred or saved, and all therapists recorded time spent providing service. Wait times and completion times were tracked. Clients seen by telerehabilitation had similar satisfaction ratings and were as likely to have their goals met as clients seen face-to-face; telerehabilitation clients saved travel costs. Rural referring therapists who used telerehabilitation spent more time in preparation and follow-up than the other groups. Clients assessed by telerehabilitation had shorter wait times for assessment than rural face-to-face clients, but their interventions took as long to complete. PMID:25945159

  8. Analysis of vibroprotection characteristics of pneumatic relaxation seat suspension with capability of vibration energy recuperation

    Directory of Open Access Journals (Sweden)

    Lyashenko Mikhail

    2017-01-01

    Full Text Available This paper proposes mechanism and control algorithm for pneumatic relaxation system of suspension with vibration energy recuperation applied to standard vehicle operator seat (“Sibeko” company. Mathematical model of the seat pneumatic relaxation suspension with two additional air volumes was created. Pneumatic motor – recuperator activated by means of air flow from the one additional volume to another is installed in air piping between additional volumes. Computational research was made in Matlab/Simulink. Amplitude-frequency characteristics of transmission coefficient for standard and proposed suspensions were plotted for preliminary evaluation of vibration protection properties of seat suspension. Performed comparative analysis of amplitude-frequency characteristics shows that noticeable improvement of vibration protection properties of pneumatic relaxation suspension system with vibration energy recuperation in comparison with standard system both in region of resonance disturbances and in above-resonance region. Main ways for further improvement of vibration protection properties of proposed system were marked out.

  9. Oil Stiction in Fast Switching Annular Seat Valves for Digital Displacement Fluid Power Machines

    DEFF Research Database (Denmark)

    Roemer, Daniel Beck; Johansen, Per; Pedersen, Henrik C.

    2014-01-01

    Digital Displacement (DD) fluid power machines utilizes electronically controlled seat valves connected to pressure chambers to obtain variable displacement with high operational efficiency and high bandwidth. To achieve high efficiency, fast valve switching is essential and all aspects related...... to the dynamic behaviour of the seat valves must be considered to optimize the machine efficiency. A significant effect influencing the valves switching performance is the presence of oil stiction when separating the contact surfaces in valve opening movement. This oil stiction force is limited by cavitation...... for low pressure levels, e.g. valves connected to the low pressure manifold, however for valves operated at higher pressure levels, the oil stiction force is dominating when the separating surfaces are close to contact. This paper presents an analytic solution to the oil stiction force for annular seat...

  10. Descriptive study of electromagnetic wave distribution for various seating positions: using digital textbooks.

    Science.gov (United States)

    Seomun, GyeongAe; Kim, YoungHwan; Lee, Jung-Ah; Jeong, KwangHoon; Park, Seon-A; Kim, Miran; Noh, Wonjung

    2014-04-01

    To better understand environmental electromagnetic wave exposure during the use of digital textbooks by elementary school students, we measured numeric values of the electromagnetic fields produced by tablet personal computers (TPCs). Specifically, we examined the distribution of the electromagnetic waves for various students' seating positions in an elementary school that uses digital textbooks. Electric and magnetic fields from TPCs were measured using the HI-3603 Visual Display Terminal/ Very Low Frequency (VDT/VLF) radiation measurement system. Electromagnetic field values from TPCs measured at a student's seat and at a teacher's computer were deemed not harmful to health. However, electromagnetic field values varied based on the distance between students, other electronic devices such as a desktop computers, and student posture while using a TPC. Based on these results, it is necessary to guide students to observe proper posture and to arrange seats at an appropriate distance in the classroom.

  11. Flow Characteristics and Sizing of Annular Seat Valves for Digital Displacement Machines

    DEFF Research Database (Denmark)

    Nørgård, Christian; Bech, Michael Møller; Andersen, Torben O.

    2018-01-01

    operating range. To achieve high machine efficiency, the valve flow losses and the required electrical power needed for valve switching should be low. The annular valve plunger geometry, of a valve prototype developed for digital displacement machines, is parametrized by three parameters: stroke length......This paper investigates the steady-state flow characteristics and power losses of annular seat valves for digital displacement machines. Annular seat valves are promising candidates for active check-valves used in digital displacement fluid power machinery which excels in efficiency in a broad...... a valve prototype. Using the simulated maps to estimate the flow power losses and a simple generic model to estimate the electric power losses, both during digital displacement operation, optimal designs of annular seat valves, with respect to valve power losses, are derived under several different...

  12. Seating Arrangement, Group Composition and Competition-driven Interaction: Effects on Students' Performance in Physics

    International Nuclear Information System (INIS)

    Roxas, R. M.; Monterola, C.; Carreon-Monterola, S. L.

    2010-01-01

    We probe the effect of seating arrangement, group composition and group-based competition on students' performance in Physics using a teaching technique adopted from Mazur's peer instruction method. Ninety eight lectures, involving 2339 students, were conducted across nine learning institutions from February 2006 to June 2009. All the lectures were interspersed with student interaction opportunities (SIO), in which students work in groups to discuss and answer concept tests. Two individual assessments were administered before and after the SIO. The ratio of the post-assessment score to the pre-assessment score and the Hake factor were calculated to establish the improvement in student performance. Using actual assessment results and neural network (NN) modeling, an optimal seating arrangement for a class was determined based on student seating location. The NN model also provided a quantifiable method for sectioning students. Lastly, the study revealed that competition-driven interactions increase within-group cooperation and lead to higher improvement on the students' performance.

  13. Performance robustness of a magnetorheological seat suspension to temperature variations using skyhook control

    Science.gov (United States)

    Wilson, Nicholas L.; Wereley, Norman M.; Choi, Young-Tai; Hiemenz, Gregory J.; Hu, Wei

    2009-03-01

    The harmonic steady-state responses of an MR seat isolator, designed and fabricated at the University of Maryland for the driver/commander seat of the Expeditionary Fighting Vehicle (EFV), are measured over a temperature range from 100°C to 1000°C, and the damper behavior is characterized using a variant of the nonlinear Bingham plastic model. The effect of damper self-heating on the model parameters is investigated and the trends with temperature variation are presented. Numerical simulations are carried out to investigate seat isolation performance across a broad frequency spectrum as temperature and payload vary. Conclusions are drawn about the performance robustness to temperature variations of the semi-active skyhook control algorithm typically utilized in vibration isolation problems.

  14. Semi-active variable stiffness vibration control of vehicle seat suspension using an MR elastomer isolator

    International Nuclear Information System (INIS)

    Du, Haiping; Li, Weihua; Zhang, Nong

    2011-01-01

    This paper presents a study on continuously variable stiffness control of vehicle seat suspension using a magnetorheological elastomer (MRE) isolator. A concept design for an MRE isolator is proposed in the paper and its behavior is experimentally evaluated. An integrated seat suspension model, which includes a quarter-car suspension and a seat suspension with a driver body model, is used to design a sub-optimal H ∞ controller for an active isolator. The desired control force generated by this active isolator is then emulated by the MRE isolator through its continuously variable stiffness property when the actuating condition is met. The vibration control effect of the MRE isolator is evaluated in terms of driver body acceleration responses under both bump and random road conditions. The results show that the proposed control strategy achieves better vibration reduction performance than conventional on–off control

  15. Rear seat safety: Variation in protection by occupant, crash and vehicle characteristics.

    Science.gov (United States)

    Durbin, Dennis R; Jermakian, Jessica S; Kallan, Michael J; McCartt, Anne T; Arbogast, Kristy B; Zonfrillo, Mark R; Myers, Rachel K

    2015-07-01

    Current information on the safety of rear row occupants of all ages is needed to inform further advances in rear seat restraint system design and testing. The objectives of this study were to describe characteristics of occupants in the front and rear rows of model year 2000 and newer vehicles involved in crashes and determine the risk of serious injury for restrained crash-involved rear row occupants and the relative risk of fatal injury for restrained rear row vs. front passenger seat occupants by age group, impact direction, and vehicle model year. Data from the National Automotive Sampling System Crashworthiness Data System (NASS-CDS) and Fatality Analysis Reporting System (FARS) were queried for all crashes during 2007-2012 involving model year 2000 and newer passenger vehicles. Data from NASS-CDS were used to describe characteristics of occupants in the front and rear rows and to determine the risk of serious injury (AIS 3+) for restrained rear row occupants by occupant age, vehicle model year, and impact direction. Using a combined data set containing data on fatalities from FARS and estimates of the total population of occupants in crashes from NASS-CDS, logistic regression modeling was used to compute the relative risk (RR) of death for restrained occupants in the rear vs. front passenger seat by occupant age, impact direction, and vehicle model year. Among all vehicle occupants in tow-away crashes during 2007-2012, 12.3% were in the rear row where the overall risk of serious injury was 1.3%. Among restrained rear row occupants, the risk of serious injury varied by occupant age, with older adults at the highest risk of serious injury (2.9%); by impact direction, with rollover crashes associated with the highest risk (1.5%); and by vehicle model year, with model year 2007 and newer vehicles having the lowest risk of serious injury (0.3%). Relative risk of death was lower for restrained children up to age 8 in the rear compared with passengers in the right

  16. Car seat inspection among children older than 3 years: Using data to drive practice in child passenger safety.

    Science.gov (United States)

    Kroeker, Amber M; Teddy, Amy J; Macy, Michelle L

    2015-09-01

    Motor vehicle crashes are the leading cause of unintentional death and disability among children 4 years to 12 years of age in the United States. Despite the high risk of injury from motor vehicle crashes in this age group, parental awareness and child passenger safety programs in particular may lack focus on this age group. This is a retrospective cross-sectional analysis of child passenger safety seat checklist forms from two Safe Kids coalitions in Michigan (2013) to identify restraint type upon arrival to car seat inspections. Other variables were included if the coalition provided a new child safety seat and if the child had a sibling who underwent a car seat inspection. χ statistics were used to compare change in restraint use on arrival and at departure, the proportion of children attending a car seat inspection event by age, the age category of children by site, the proportion of children with siblings also undergoing a car seat inspection by age, and the distribution of a new child safety seat by age. Data were available from 1,316 Safe Kids Huron Valley and 3,215 Safe Kids Greater Grand Rapids car seat inspections. Just 10.8% of the total seats inspected were booster seats. Child safety seats for infant and young children were more commonly inspected (rear-facing carrier [40.3%], rear-facing convertible [10.2%], and forward-facing [19.3%] car seats). Few children at inspections used a seat belt only (5.4%) or had no restraint (13.8%). Children 4 years and older were found to be in a suboptimal restraint at least 30% of the time. Low proportions of parents use car seat inspections for children in the booster seat age group. The proportion of children departing the inspection in a more protective restraint increased with increasing age. This highlights an area of weakness in child passenger safety programs and signals an opportunity to strengthen efforts on The Booster Age Child. Epidemiologic/prognostic study, level III.

  17. The influence of parental education and other socio-economic factors on child car seat use.

    Science.gov (United States)

    Rok Simon, Mateja; Korošec, Aleš; Bilban, Marjan

    2017-03-01

    The behaviour of parents in ensuring car passenger safety for their children is associated with socio-economic (SE) status of the family; however, the influence of parental education has rarely been researched and the findings are contradictory. The aim of the study was to clarify whether parental education influences the use of a child car seat during short rides. A cross-sectional survey was carried out in outpatient clinics for children's healthcare across Slovenia. 904 parents of 3-year-old children participated in the study; the response rate was 95.9%. A self-administered questionnaire was used. A binary multiple logistic regression was applied to assess the association between parental unsafe behaviour as dependent variable, and education and other SE factors as independent variables. 14.6% of parents did not use a child car seat during short rides. Families where mother had low or college education had higher odds of the non-use of a child car seat than families where mother had a university education. Single-parent families and those who lived in areas with low or medium SE status also had higher odds of the non-use of a child car seat. Low educational attainment influences parents' behaviour regarding the non-use of a child car seat. Low parental education is not the only risk factor since some highly educated parents also have high odds of unsafe behaviour. All parents should therefore be included in individually tailored safety counselling programmes. SE inequalities could be further reduced with provision of free child car seats for eligible families.

  18. Laid Back Avant-Garde

    DEFF Research Database (Denmark)

    Degn Johansson, Troels

    2010-01-01

    controversial. Whereas Laid Back has been one of the largest commercial successes of the Danish music industry due to the success of a handful of pop hits (in Germany, mainly), the duo has never been recognized for its artistic contribution. A few years after his public statement, von Trier directed...... the official music video for Laid Back’s Bakerman single, where the duo and a backing group dressed up as bakers is seen performing while skydiving. Rather than approaching this video as an illustration of the song, the paper suggests that the Bakerman video should be seen as the result of a curatorial act...... where Lars von Trier seeks to elaborate on his particular fondness of the values that this pop duo seems to represent for him; simplicity, popularity (in Danish “folkelighed”), and irony. In this sense, by promoting the Laid Back single by means of a music video, von Trier’s contribution leads us rather...

  19. Active Prompting to Decrease Cell Phone Use and Increase Seat Belt Use While Driving

    OpenAIRE

    Clayton, Michael; Helms, Bridgett; Simpson, Cathy

    2006-01-01

    Automobile crashes are the leading cause of death for those aged 3 to 33, with 43,005 (118 per day) Americans killed in 2002 alone. Seat belt use reduces the risk of serious injury in an accident, and refraining from using a cell phone while driving reduces the risk of an accident. Cell phone use while driving increases accident rates, and leads to 2,600 U.S. fatalities each year. An active prompting procedure was employed to increase seat belt use and decrease cell phone use among drivers ex...

  20. The optimization of aircraft seat cushion fire-blocking layers. Full Scale: Test description and results

    Science.gov (United States)

    Schutter, K. J.; Duskin, F. E.

    1982-01-01

    Full-scale burn tests were conducted on thirteen different seat cushion configurations in a cabin fire simulator. The fire source used was a quartz lamp radiant energy panel with a propane pilot flame. During each test, data were recorded for cushion temperatures, radiant heat flux, rate of weight loss of test specimens, and cabin temperatures. When compared to existing passenger aircraft seat cushions, the test specimens incorporating a fire barrier and those fabricated from advance materials, using improved construction methods, exhibited significantly greater fire resistance.

  1. ACES II Seat Roller Study: Findings of Detrimental Friction under High Windblast or Adverse Flight Conditions

    Science.gov (United States)

    2015-08-12

    speed, in zero wind) kt = knot lbf = pounds of force (=1 lbm x 1g) lbm = pounds of mass (=1/32.174 of a slug) MDRC = Multi-Axial Dynamic Response...pilot whose weight has been waived to the modern limits (i.e. originally limited to 211 lbm pilots for seat qualification, now waived up to 245 lbm ...below [repeating Ref-1 figures], by the DRS of the subject mishap, and by the aft seat (heavyweight; 198 lbm nude, 95th percentile) of sled test 110E

  2. Body height and arterial pressure in seated and supine young males during +2 G centrifugation

    DEFF Research Database (Denmark)

    Arvedsen, Sine K.; Eiken, Ola; Kölegård, Roger

    2015-01-01

    by the use of a human centrifuge would increase mean arterial pressure (MAP) more in tall than in short males in the seated position. In short (162-171cm, n=8) and tall (194-203cm, n=10) healthy males (18-41yr), brachial arterial pressure, heart rate (HR) and cardiac output were measured during +2G...... centrifugation, while they were seated upright with the legs kept horizontal (+2Gz). In a separate experiment, the same measurements were done with the subjects supine (+2Gx). During +2Gz MAP increased in the short (22±2 mmHg, P 

  3. Characterization of Vertical Impact Device Acceleration Pulses Using Parametric Assessment: Phase 3 Wiaman Seat

    Science.gov (United States)

    2016-07-01

    711 HPW/RHCPT) and their in-house technical support contractor , Infoscitex, conducted a series of tests to identify the performance capabilities of...Cell Seat Configuration Drop Ht . (in) Mean Peak Acceleration (G) Mean Velocity Change (ft/s) SH1 WS1 20 80.08 ± 3.71 13.54 ± 0.49 SH2...6. Test Matrix for VID Response with WS2 Test Cell Seat (Felt) Configuration Drop Ht . (in) Mean Peak Acceleration (G

  4. The risk of whiplash-induced medical impairment in rear-end impacts for males and females in driver seat compared to front passenger seat

    Directory of Open Access Journals (Sweden)

    Bertil Jonsson

    2013-07-01

    Females had a relative risk of medical impairment of 3.1 compared to men after adjustment for the average increased risk in the driver position. The driver position had a doubled relative risk compared to the front passenger position. As a conclusion it may be of value to take risk differences between male and female occupants and between driver and front passenger positions into account in future automotive car and seat construction.

  5. Back surgery: Modern medical pitfall.

    Science.gov (United States)

    Smith, Jc

    2002-01-01

    Medical iatrogenesis is at an all-time high with increasing deaths, disability, and costs compounded by unnecessary and ineffective surgeries despite the warnings from WHO, the US Public Health Service, and the Institute of Medicine. One area in particular, failed back surgeries, has drawn increasing attention by researchers due to disproved medical theories and surgical treatments. Paradoxically, while spinal manipulative therapy has been shown to achieve better results for this epidemic of low back pain in particular, medical and insurance programs often limit or boycott this inexpensive and effective treatment, indicating the solution to lowering medical costs and iatrogenesis now rests with political and economic factors primarily.

  6. Back Schools for chronic non-specific low back pain.

    Science.gov (United States)

    Parreira, Patrícia; Heymans, Martijn W; van Tulder, Maurits W; Esmail, Rosmin; Koes, Bart W; Poquet, Nolwenn; Lin, Chung-Wei Christine; Maher, Christopher G

    2017-08-03

    Many people with low back pain (LBP) become frequent users of healthcare services in their attempt to find treatments that minimise the severity of their symptoms. Back School consists of a therapeutic programme given to groups of people that includes both education and exercise. However, the content of Back School has changed over time and appears to vary widely today. This review is an update of a Cochrane review of randomised controlled trials (RCTs) evaluating the effectiveness of Back School. We split the Cochrane review into two reviews, one focusing on acute and subacute LBP, and one on chronic LBP. The objective of this systematic review was to determine the effect of Back School on pain and disability for adults with chronic non-specific LBP; we included adverse events as a secondary outcome. In trials that solely recruited workers, we also examined the effect on work status. We searched for trials in the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, Embase, CINAHL, two other databases and two trials registers to 15 November 2016. We also searched the reference lists of eligible papers and consulted experts in the field of LBP management to identify any potentially relevant studies we may have missed. We placed no limitations on language or date of publication. We included only RCTs and quasi-RCTs evaluating pain, disability, and/or work status as outcomes. The primary outcomes for this update were pain and disability, and the secondary outcomes were work status and adverse events. Two review authors independently performed the 'Risk of bias' assessment of the included studies using the 'Risk of bias' assessment tool recommended by The Cochrane Collaboration. We summarised the results for the short-, intermediate-, and long-term follow-ups. We evaluated the overall quality of evidence using the GRADE approach. For the outcome pain, at short-term follow-up, we found very low-quality evidence that Back School is more effective than no

  7. Interference of Different Types of Seats on Postural Control System during a Forward-Reaching Task in Individuals with Paraplegia

    Science.gov (United States)

    de Abreu, Daniela Cristina Carvalho; Takara, Kelly; Metring, Nathalia Lopes; Reis, Julia Guimaraes; Cliquet, Alberto, Jr.

    2012-01-01

    We aimed to evaluate the influence of different types of wheelchair seats on paraplegic individuals' postural control using a maximum anterior reaching test. Balance evaluations during 50, 75, and 90% of each individual's maximum reach in the forward direction using two different cushions on seat (one foam and one gel) and a no-cushion condition…

  8. 75 FR 52614 - Special Conditions: Embraer Model ERJ 170-100 SU Series Airplanes; Seats With Non-Traditional...

    Science.gov (United States)

    2010-08-27

    ... being mostly fabric and metal, the contribution to a fire in the cabin had been minimized and was not..., non-metallic panels that would affect survivability during a post-crash fire event. The applicable..., seats were designed with a metal frame covered by fabric, not with large, non-metallic panels. Seats...

  9. 75 FR 81224 - Availability of Recreational Diving, Oil and Gas Operations and Commercial Fishing Seats for the...

    Science.gov (United States)

    2010-12-27

    ... Recreational Diving, Oil and Gas Operations and Commercial Fishing Seats for the Flower Garden Banks National... Service (NOS), National Oceanic and Atmospheric Administration (NOAA), Department of Commerce DOC). ACTION... seats on the Flower Garden Banks National Marine Sanctuary Advisory Council: Recreational Diving, Oil...

  10. Explaining state-to-state differences in seat belt use : an analysis of socio-demographic variables.

    Science.gov (United States)

    2011-02-01

    "Despite the extensive evidence about the benefits of seat belt use, there is a great deal of variation in use within the US. For example, the national average for seat belt use in 2009 was 84 percent while the state-level averages ranged from 68 per...

  11. Topology Selection and Analysis of Actuator for Seat Valves suitable for use in Digital Displacement Pumps/Motors

    DEFF Research Database (Denmark)

    Rømer, Daniel; Johansen, Per; Pedersen, Henrik C.

    2013-01-01

    seat valves is developed, and the resulting dynamic response of the seat valve is presented. Requirements for the valve actuator is established based on the DD application, and three feasible actuator topologies are analyzed by means of transient electro-magnetic FEA simulation. From this analysis...

  12. 20 CFR 404.1242 - Back pay.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Back pay. 404.1242 Section 404.1242 Employees... Prior to 1987 § 404.1242 Back pay. (a) Back pay defined. Back pay is pay received in one period of time... an employer. It includes pay made under Federal or State laws intended to create an employment...

  13. Association Between NCAP Ratings and Real-World Rear Seat Occupant Risk of Injury.

    Science.gov (United States)

    Metzger, Kristina B; Gruschow, Siobhan; Durbin, Dennis R; Curry, Allison E

    2015-01-01

    Several studies have evaluated the correlation between U.S. or Euro New Car Assessment Program (NCAP) ratings and injury risk to front seat occupants, in particular driver injuries. Conversely, little is known about whether NCAP 5-star ratings predict real-world risk of injury to restrained rear seat occupants. The NHTSA has identified rear seat occupant protection as a specific area under consideration for improvements to its NCAP. In order to inform NHTSA's efforts, we examined how NCAP's current 5-star rating system predicts risk of moderate or greater injury among restrained rear seat occupants in real-world crashes. We identified crash-involved vehicles, model year 2004-2013, in NASS-CDS (2003-2012) with known make and model and nonmissing occupant information. We manually matched these vehicles to their NCAP star ratings using data on make, model, model year, body type, and other identifying information. The resultant linked NASS-CDS and NCAP database was analyzed to examine associations between vehicle ratings and rear seat occupant injury risk; risk to front seat occupants was also estimated for comparison. Data were limited to restrained occupants and occupant injuries were defined as any injury with a maximum Abbreviated Injury Scale (AIS) score of 2 or greater. We linked 95% of vehicles in NASS-CDS to a specific vehicle in NCAP. The 18,218 vehicles represented an estimated 6 million vehicles with over 9 million occupants. Rear seat passengers accounted for 12.4% of restrained occupants. The risk of injury in all crashes for restrained rear seat occupants was lower in vehicles with a 5-star driver rating in frontal impact tests (1.4%) than with 4 or fewer stars (2.6%, P =.015); results were similar for the frontal impact passenger rating (1.3% vs. 2.4%, P =.024). Conversely, side impact driver and passenger crash tests were not associated with rear seat occupant injury risk (driver test: 1.7% for 5-star vs. 1.8% for 1-4 stars; passenger test: 1.6% for 5

  14. Back Pain in the U.S. Army Aviation Community

    Science.gov (United States)

    2017-05-16

    69 0 Active Duty 268 250 18 Reserve/National Guard 136 130 6 Dept. of the Army Civilian 16 16 0 Contractor 2 2 0 *Missing 45 45 0...respondents based on reported military affiliation could be qualified to receive such benefits (Department of the Army Civilians and contractors that are...activity actual help manage my pain 23 20-Seat material is non-supportive- I used an organ aero seat helped. Seat ht when reclined was to low

  15. The seat of ground water discharge as ore-mabilizing factor in the formatian of hydrogenic uranium deposits

    International Nuclear Information System (INIS)

    Natal'chenko, B.I.; Gol'dshtejn, R.I.

    1982-01-01

    The role of structural-hydrogeological factor in the process of ore-controlling zoning development during hydrogeneous deposit formation is discussed, as reflecting in the most objective way the spreading of stratal oxidation zones and morphology of uranium mineralization as regards discharge seats because there are only they which mobilize stratal waters for active displacement. The types of discharge seats of stratal waters and their effect on formation of ore-controlling zones of stratal oxidation with uranium mineralization are presented. The conclusion is drawn that local and regional discharge seats of stratal waters dictate both the spacing of regional fronts of stratal-oxidized rocks and their ore content degree. The displacement of discharge seats or their growing into local regions of alimentation results in reorganization of the total ore-controlling zoning, which enables to consider the seats of water discharge as ore-mobilizing structures in the formation of hydrogenic uranium deposits

  16. Climbing back to the top

    Energy Technology Data Exchange (ETDEWEB)

    Curry, Lynn

    2010-07-01

    California - the top wind producer in the US since the 1980s lost its lead in 2008 in the face of intense competition from other states. But backed by strong financial and political support from the government, California's wind energy sector is slowly making a comeback. (orig.)

  17. Sociology Back to the Publics

    NARCIS (Netherlands)

    Ossewaarde, Marinus R.R.

    2007-01-01

    This article is a reading of the `new sociology' that is mainly identified with the works of C. Wright Mills and Alvin Gouldner. Its main argument is that during the past 40 years the new sociology gave back a public face to sociology. This distinguishes it from the `old sociology' that had not been

  18. Pilates for low back pain

    NARCIS (Netherlands)

    Yamato, T.P.; Maher, C.G.; Saragiotto, B.T.; Hancock, M.J.; Ostelo, R.W.J.G.; Cabral, C.M.N.; Menezes Costa, L.C.; Costa, L.O.P.

    2015-01-01

    BACKGROUND: Non-specific low back pain is a major health problem worldwide. Interventions based on exercises have been the most commonly used treatments for patients with this condition. Over the past few years, the Pilates method has been one of the most popular exercise programmes used in clinical

  19. Pilates for low back pain

    NARCIS (Netherlands)

    Yamato, Tiê P.; Maher, Christopher G.; Saragiotto, Bruno T.; Hancock, Mark J.; Ostelo, Raymond W.J.G.; Cabral, Cristina M.N.; Menezes Costa, Luciola C.; Costa, Leonardo O.P.

    2016-01-01

    BACKGROUND: Non-specific low back pain is a major health problem worldwide. Interventions based on exercises have been the most commonly used treatments for patients with this condition. Over the past few years, the Pilates method has been one of the most popular exercise programmes used in clinical

  20. Coping with Low Back Pain.

    Science.gov (United States)

    Kindig, L. E.; Mrvos, S. R.

    Guidelines are offered for the prevention and relief of lower back pain. The structure of the spine is described, and the functions and composition of spinal disks are explained. A list is included of common causes of abnormalities of the spinal column, and injuries which may cause the fracture of the vertebrae are described. Factors causing low…

  1. Low back pain and yoga.

    Science.gov (United States)

    Singh, Supreet

    2014-12-01

    ABSTRACT Questions from patients about pain conditions and analgesic pharmacotherapy and responses from authors are presented to help educate patients and make them more effective self-advocates. The topic addressed in this issue is chronic low back pain, one of the most common reasons to visit one's primary care doctor. Complementary approaches, including yoga, will be addressed.

  2. Enhancing social inclusion of children with externalizing problems through classroom seating arrangements: A randomized controlled trial

    NARCIS (Netherlands)

    Berg, Y.H.M. van den; Stoltz, S.E.M.J.

    2018-01-01

    Inclusive education has brought new challenges for teachers, including the search for a suitable place in the classroom for children with externalizing problems. In the current study, we examined whether a careful rearrangement of the classroom seats could promote social acceptance and more

  3. Application of a bus seat buffer to mitigate frontal crash effects

    Science.gov (United States)

    Stanisławek, Sebastian; Dziewulski, Paweł; Sławiński, Grzegorz

    2018-01-01

    The paper considers the problem of coach occupant safety during crash events. The authors present a simple low-cost seat buffer concept which may mitigate the effects of frontal impact. The method of computer simulation was chosen to solve the problem efficiently. The Finite Element Method (FEM) implemented in the LS-DYNA commercial code was used. The testing procedure was based on European Commission regulations, under which vehicles move at a defined speed. Simulations have shown that seat occupants suffer serious trauma during a crash, with the head experiencing relatively high acceleration, thus resulting in an HIC36 of 1490. The installation of a protective buffer mounted on the upper part of the seat reduced the HIC36 to only 510. However, in its current form it does not meet the requirements of the regulations. Further modifications to the overlay shape and structure are essential in order to better improve the deceleration of passengers' bodies. Moreover, a detailed model of seats and their anchorage should be taken into account. A more flexible structure should provide more positive and more accurate results.

  4. Users in the Driver's Seat: A New Approach to Classifying Teaching Methods in a University Repository

    NARCIS (Netherlands)

    Neumann, Susanne; Oberhuemer, Petra; Koper, Rob

    2009-01-01

    Neumann, S., Oberhuemer, P., & Koper, R. (2009). Users in the Driver's Seat: A New Approach to Classifying Teaching Methods in a University Repository. In U. Cress, V. Dimitrova & M. Specht (Eds.), Learning in the Synergy of Multiple Disciplines. Proceedings of the Fourth European Conference on

  5. Transportation of Wheelchair Seated Students in School Buses: A Review of State Policy

    Science.gov (United States)

    Moore, Britta; Fuhrman, Susan; Karg, Patricia

    2010-01-01

    This study quantitatively reviews publicly available state policies as they relate to the transportation of wheelchair-seated students in school buses. Inclusion of best practices in specially equipped school bus and driver training policies was assessed. Key points of interest within state policies were identified based on site visits, common…

  6. 76 FR 53660 - Federal Motor Vehicle Safety Standards; Seat Belt Assemblies

    Science.gov (United States)

    2011-08-29

    ... Traffic Safety Administration 49 CFR Part 571 [Docket No. NHTSA-2011-0078] Federal Motor Vehicle Safety... integration of electrical signals from vehicle crash sensors would work with the requested mechanical seat... (350,000) of the vehicles were stopped in the traffic lane prior to the crash event (pg. 22, Table 7...

  7. Active Prompting to Decrease Cell Phone Use and Increase Seat Belt Use while Driving

    Science.gov (United States)

    Clayton, Michael; Helms, Bridgett; Simpson, Cathy

    2006-01-01

    Automobile crashes are the leading cause of death for those aged 3 to 33, with 43,005 (118 per day) Americans killed in 2002 alone. Seat belt use reduces the risk of serious injury in an accident, and refraining from using a cell phone while driving reduces the risk of an accident. Cell phone use while driving increases accident rates, and leads…

  8. Neck injury criteria and certification procedure for side-facing aircraft seats

    NARCIS (Netherlands)

    Philippens, M.M.G.M.; Forbes, P.A.; Wismans, J.S.H.M.; DeWeese, R.; Moorcroft, D.

    2011-01-01

    This report documents research started in 2002 that identified the potential need for explicit neck injury criteria and tolerances for certification of side-facing seats in aircraft. Laboratory sled tests with full-body postmortem human subjects proved that there is a substantial risk for serious

  9. Optimum design of seat region in valves suitable for digital displacement machines

    DEFF Research Database (Denmark)

    Roemer, Daniel Beck; Johansen, Per; Pedersen, Henrik C.

    2014-01-01

    Digital displacement fluid power is an upcoming technology setting new standards for the achievable efficiency in variable displacement fluid power pumps and motors. In the present work, an annular seat valve suitable for use in digital displacement units is considered, and the valve geometry...

  10. 41 CFR 301-10.124 - What are coach-class Seating Upgrade Programs?

    Science.gov (United States)

    2010-07-01

    ... traveler's personal choice and therefore is at the traveler's personal expense. An agency travel... Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES ALLOWABLE TRAVEL EXPENSES 10... reimburse the additional seat choice fee, according to internal agency policy. [FTR Amdt. 2009-06, 74 FR...

  11. Non-Invasive Detection of Respiration and Heart Rate with a Vehicle Seat Sensor.

    Science.gov (United States)

    Wusk, Grace; Gabler, Hampton

    2018-05-08

    This study demonstrates the feasibility of using a seat sensor designed for occupant classification from a production passenger vehicle to measure an occupant’s respiration rate (RR) and heart rate (HR) in a laboratory setting. Relaying occupant vital signs after a crash could improve emergency response by adding a direct measure of the occupant state to an Advanced Automatic Collision Notification (AACN) system. Data was collected from eleven participants with body weights ranging from 42 to 91 kg using a Ford Mustang passenger seat and seat sensor. Using a ballistocardiography (BCG) approach, the data was processed by time domain filtering and frequency domain analysis using the fast Fourier transform to yield RR and HR in a 1-min sliding window. Resting rates over the 30-min data collection and continuous RR and HR signals were compared to laboratory physiological instruments using the Bland-Altman approach. Differences between the seat sensor and reference sensor were within 5 breaths per minute for resting RR and within 15 beats per minute for resting HR. The time series comparisons for RR and HR were promising with the frequency analysis technique outperforming the peak detection technique. However, future work is necessary for more accurate and reliable real-time monitoring of RR and HR outside the laboratory setting.

  12. Measurement of the functional impact of adaptive seating technology in children with cerebral palsy

    NARCIS (Netherlands)

    Ryan, S.E.

    2009-01-01

    Many young children with cerebral palsy have motor impairments that affect their ability to sit and do activities unsupported. They often rely on special adaptive seating devices for postural control and stability. Healthcare practitioners generally accept that these products improve functioning in

  13. Virtual Seating in the Globe Theatre: Appreciating Film Adaptations of Shakespeare's Plays

    Science.gov (United States)

    Williamson, Lynette

    2009-01-01

    While it may be true that different interpretations of Shakespeare's words elicit varied responses, Shakespeare's popularity in Renaissance England was due in large part to his ability to appeal to a socially and educationally diverse audience. Shakespeare knew what it took to fill the seats. To encourage appreciation of Shakespeare's universal…

  14. 75 FR 66686 - Federal Motor Vehicle Safety Standards; Seat Belt Assembly Anchorages, School Bus Passenger...

    Science.gov (United States)

    2010-10-29

    ... loose belts) also applies to seats that have wheelchair positions or side emergency doors behind them... have wheelchair positions or side emergency doors behind them); and, the test requirements for self... which correspond to the size of some high school football players) and school buses closer in weight to...

  15. Three experiments to support the design of lightweight comfortable vehicle seats

    NARCIS (Netherlands)

    Vink, P.; Franz, M.; Kampa, I.; Zenk, R.

    2012-01-01

    Seats need to be more lightweight for airplanes, cars, busses and even trains to contribute to a better environment and to reduce energy consumption. However, a reduction in comfort due to weight reduction is not preferable, which opens a new area of research: improving comfort with a minimum of

  16. Impact of Implementing a Primary Enforcement Seat Belt Law in Florida : A Case Study

    Science.gov (United States)

    2012-08-01

    On June 30, 2009, Florida implemented a primary seat belt law. The State was already engaged in a Rural : Demonstration Program (RDP) to increase belt usage in rural areas in the northern part of the State and participated : regularly in annual Click...

  17. Estimated medical cost savings in Utah by implementation of a primary seat belt law

    Science.gov (United States)

    2010-05-01

    This report examines 2007 hospital discharge data reporting cases where the external cause of injury to : a vehicle occupant was a motor vehicle crash to predict the estimated savings to Utah if a primary seat : belt law is implemented. The savings a...

  18. Estimated medical cost savings in Nevada by implementation of a primary seat belt law

    Science.gov (United States)

    2008-09-01

    This report examines 2007 hospital discharge data reporting cases where the external cause of injury to a vehicle occupant was a motor vehicle crash to predict the estimated savings to Nevada if a primary seat belt law is implemented. The savings are...

  19. Estimated medical cost savings in Rhode Island by implementation of a primary seat belt law

    Science.gov (United States)

    2008-09-01

    This report examines 2006 hospital discharge data reporting cases where the external cause of injury to a vehicle occupant was a motor vehicle crash to predict the estimated savings to Rhode Island if a primary seat belt law is implemented. The savin...

  20. Estimated medical cost savings in Massachusetts by implementation of a primary seat belt law

    Science.gov (United States)

    2008-12-01

    This report examines 2006 hospital discharge data reporting cases where the external cause of injury to a vehicle occupant was a motor vehicle crash to predict the estimated savings to Massachusetts if a primary seat belt law is implemented. The savi...

  1. Estimated medical cost savings in Vermont by implementation of a primary seat belt law

    Science.gov (United States)

    2008-09-01

    This report examines 2005 hospital discharge data reporting cases where the external cause of injury to a vehicle occupant was a motor vehicle crash to predict the estimated savings to the State of Vermont if a primary seat belt law is implemented. T...

  2. STS-37 Commander Nagel in commanders seat on OV-104's flight deck

    Science.gov (United States)

    1991-01-01

    STS-37 Commander Steven R. Nagel, wearing launch and entry suit (LES), sits at commanders station on the forward flight deck of Atlantis, Orbiter Vehicle (OV) 104. Surrounding Nagel are the seat headrest, control panels, checklists, forward flight deck windows, and three drinking water containers with straws attached to forward panel F2.

  3. Teaching Undergraduate Marketing Students Using "Hot Seating through Puppetry": An Exploratory Study

    Science.gov (United States)

    Pearce, Glenn; Hardiman, Nigel

    2012-01-01

    Changes in preferred methods of learning among many students in recent years have challenged educators to introduce more interactive and experiential teaching methods. "Hot seating"--where a person, such as an invited subject expert is interviewed by an audience--is a well-established interactive method of learning, but is often limited…

  4. Wheelchair Seating Assessment and Intervention: A Comparison between Telerehabilitation and Face-to-Face Service

    Directory of Open Access Journals (Sweden)

    Ingrid G Barlow

    2009-09-01

    Full Text Available This study compared outcomes of wheelchair seating and positioning interventions provided by telerehabilitation (n=10 and face-to-face (n=20; 10 in each of two comparison groups, one urban and one rural. Comparison clients were matched to the telerehabilitation clients in age, diagnosis, and type of seating components received. Clients and referring therapists rated their satisfaction and identified if seating intervention goals were met. Clients recorded travel expenses incurred or saved, and all therapists recorded time spent providing service. Wait times and completion times were tracked. Clients seen by telerehabilitation had similar satisfaction ratings and were as likely to have their goals met as clients seen face-to-face; telerehabilitation clients saved travel costs. Rural referring therapists who used telerehabilitation spent more time in preparation and follow-up than the other groups. Clients assessed by telerehabilitation had shorter wait times for assessment than rural face-to-face clients, but their interventions took as long to complete. Keywords: Telerehabilitation, Telehealth, Videoconferencing, Wheelchair Seating, Outcomes, Rehabilitation

  5. Temporal behavior of deep-seated gravitational slope deformations: A review

    Czech Academy of Sciences Publication Activity Database

    Pánek, T.; Klimeš, Jan

    2016-01-01

    Roč. 156, MAY (2016), s. 14-38 ISSN 0012-8252 Institutional support: RVO:67985891 Keywords : deep-seated gravitational slope deformations * catastrophic slope failures * deformation rates * dating * monitoring Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 7.051, year: 2016

  6. Determining the Relationship of Primary Seat Belt Laws to Minority Ticketing

    Science.gov (United States)

    2011-09-01

    Racial profiling is often raised as an issue when States change their seat belt law from secondary enforcement (i.e., stop only for some other violation) to primary enforcement (i.e., stop for an observed belt law violation alone). Thirteen States ma...

  7. Thermal comfort of seated occupants in rooms with personalized ventilation combined with mixing or displacement ventilation

    DEFF Research Database (Denmark)

    Forejt, L.; Melikov, Arsen Krikor; Cermak, Radim

    2004-01-01

    The performance of two personalized ventilation systems combined with mixing or displacement ventilation was studied under different conditions in regard to thermal comfort of seated occupants. The cooling performance of personalized ventilation was found to be independent of room air distribution...

  8. Searching the seat of the soul in Ancient Greek and Byzantine medical literature.

    Science.gov (United States)

    Lykouras, Eleftherios; Poulakou-Rebelakou, Effie; Ploumpidis, Demetrios N

    2010-12-01

    The objective of this paper was to examine the ancient and medieval concepts about the seat of the mental functions, as exposed in Greek texts from Antiquity to Byzantine times. The review of the philosophical and medical literature from the original ancient Greek language from the Homeric epics to the Holy Fathers of Christianity, as the problem of the seat of the soul remained without a certain answer through the centuries. Primitive concepts attributed great significance to the soul and dictated cannibal behaviours for the possession and eating of the defeated enemy's heart. Mental functions, such as thinking, feeling and mainly those related to affective manifestations, were attributed to the heart and to some other internal organs (liver, diaphragm) from the times of Greek mythology. Philosophy and empirical medicine had underestimated the brain probably because it is a 'silent' organ, contrary to the palpitating heart, with its obvious participations in the emotional reactions. The role of the brain as the mental organ and the seat of emotions has been gradually recognized. The permanent question of the seat of the soul had been for many centuries a critical dispute and the contribution of Greek philosophical and medical thought was decisive for the contemporary transformation of the whole concept.

  9. Using CFD to Establish a Correlation between Design Parameters and Performance Characteristics for Seat valves

    DEFF Research Database (Denmark)

    Andersen, T. O.; Hansen, M. R.; Sørensen, H. L.

    2003-01-01

    This paper describes experimental and Computational Fluid Dynamics (CFD) analyses of the flow and flow force characteristics in hydraulic seat valves. The flow force compensation method were investigated based on balancing the axial fluid momentum by designing a rim on the rear edge of the poppet...

  10. 76 FR 23305 - Availability of Seats for the Stellwagen Bank National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2011-04-26

    ... the Stellwagen Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration, Department... applicants for the following seat on the Stellwagen Bank National Marine Sanctuary Advisory Council: (1) At...

  11. 76 FR 68429 - Availability of Seats for Olympic Coast National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2011-11-04

    ... Olympic Coast National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries... applications for the following vacant seats on the Olympic Coast National Marine Sanctuary Advisory Council... in the area affected by the sanctuary. Applicants who are chosen as members should expect to serve...

  12. 76 FR 2347 - Availability of Seats for the Stellwagen Bank National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2011-01-13

    ... the Stellwagen Bank National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration, Department... applicants for the following seats on the Stellwagen Bank National Marine Sanctuary Advisory Council: (1) At...

  13. 77 FR 16813 - Availability of Seat for Olympic Coast National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2012-03-22

    ... Olympic Coast National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries... applications for the following vacant seat on the Olympic Coast National Marine Sanctuary Advisory Council... resources; and possibly the length of residence in the area affected by the sanctuary. Applicants who are...

  14. 75 FR 66064 - Availability of Seats for Olympic Coast National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2010-10-27

    ... Olympic Coast National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries... applications for the following vacant seats on the Olympic Coast National Marine Sanctuary Advisory Council... in the area affected by the sanctuary. Applicants who are chosen as members should expect to serve...

  15. 78 FR 2957 - Availability of Seats for the Flower Garden Banks National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2013-01-15

    ... the Flower Garden Banks National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Flower Garden Banks National Marine Sanctuary Advisory...

  16. 77 FR 64797 - Availability of Seats for the Gray's Reef National Marine Sanctuary Advisory Council

    Science.gov (United States)

    2012-10-23

    ... the Gray's Reef National Marine Sanctuary Advisory Council AGENCY: Office of National Marine Sanctuaries (ONMS), National Ocean Service (NOS), National Oceanic and Atmospheric Administration (NOAA... applications for the following vacant seats on the Gray's Reef National Marine Sanctuary Advisory Council: K...

  17. Nigeria's bid for inclusion in the permanent seat of the security ...

    African Journals Online (AJOL)

    This paper seeks to examine the opinions of some scholars on Nigeria's agitation for reform and inclusion in the permanent seat of the Security Council of the United Nations, presently occupied by five countries including the United States of America, Russia, Great Britain, France and China. The essence of the reform is to ...

  18. Comfort, experience, physiology and car seat innovation : Theory, Design and Evaluation

    NARCIS (Netherlands)

    Franz, M.M.

    2010-01-01

    The development process of car seats is very complex and many factors have to be considered in the development, such as anthropometry, physiology, safety, design and comfort. A factor making it more complex is the fact that future cars should be more sustainable, making the need for weight reduction

  19. The Role of Seat Belt in the Prevention of Fatalities and ...

    African Journals Online (AJOL)

    Background Road traffic crashes still remain a prominent cause of death worldwide but proper use of safety belts can prevent death in some of these accidents. The aim of this study was therefore to examine the role of seat beltuse I violation in Rivers State, Nigeria and to determine its relationship with fatality of road traffic ...

  20. Shoulder Pain in Cases of Spinal Injury: Influence of the Position of the Wheelchair Seat

    Science.gov (United States)

    Giner-Pascual, Manuel; Alcanyis-Alberola, Modesto; Millan Gonzalez, Luis; Aguilar-Rodriguez, Marta; Querol, Felipe

    2011-01-01

    The objective of this study was to determine the relationship between shoulder pain and the position of the seat of a wheelchair relative to the ground and to determine the relationship between shoulder pain and structural damage. A transversal study of a patient cohort of 140 patients with grade A and B spinal cord injuries below the T1 vertebra,…

  1. Integrating gesture recognition in airplane seats for in-flight entertainment

    NARCIS (Netherlands)

    van de Westelaken, H.F.M.; Hu, J.; Liu, H.; Rauterberg, G.W.M.; Pan, Z.; Zhang, X.; El Rhalibi, A.; Woo, W.; Li, Y.

    2008-01-01

    In order to reduce both the psychological and physical stress in air travel, sensors are integrated in airplane seats to detect the gestures as input for in-flight entertainment systems. The content provided by the entertainment systems helps to reduce the psychological stress, and the gesture

  2. Embedding gesture recognition into airplane seats for in-flight entertainment

    NARCIS (Netherlands)

    van de Westelaken, H.F.M.; Hu, J.; Liu, H.; Rauterberg, G.W.M.

    2011-01-01

    In order to reduce both psychological and physical stress in air travel, sensors are integrated into airplane seats to detect gestures as input for in-flight entertainment systems. The content provided by the entertainment systems helps to reduce psychological stress, and gesture recognition is used

  3. Microenvironment temperature prediction between body and seat interface using autoregressive data-driven model.

    Science.gov (United States)

    Liu, Zhuofu; Wang, Lin; Luo, Zhongming; Heusch, Andrew I; Cascioli, Vincenzo; McCarthy, Peter W

    2015-11-01

    There is a need to develop a greater understanding of temperature at the skin-seat interface during prolonged seating from the perspectives of both industrial design (comfort/discomfort) and medical care (skin ulcer formation). Here we test the concept of predicting temperature at the seat surface and skin interface during prolonged sitting (such as required from wheelchair users). As caregivers are usually busy, such a method would give them warning ahead of a problem. This paper describes a data-driven model capable of predicting thermal changes and thus having the potential to provide an early warning (15- to 25-min ahead prediction) of an impending temperature that may increase the risk for potential skin damages for those subject to enforced sitting and who have little or no sensory feedback from this area. Initially, the oscillations of the original signal are suppressed using the reconstruction strategy of empirical mode decomposition (EMD). Consequentially, the autoregressive data-driven model can be used to predict future thermal trends based on a shorter period of acquisition, which reduces the possibility of introducing human errors and artefacts associated with longer duration "enforced" sitting by volunteers. In this study, the method had a maximum predictive error of body insensitivity and disability requiring them to be immobile in seats for prolonged periods. Copyright © 2015 Tissue Viability Society. Published by Elsevier Ltd. All rights reserved.

  4. 75 FR 30776 - Extension of Application Period for Seats for the Channel Islands National Marine Sanctuary...

    Science.gov (United States)

    2010-06-02

    ... the general public. The Council functions in an advisory capacity to the Sanctuary Superintendent. The... their particular expertise and experience in relation to the seat for which they are applying; community... increase the public knowledge and stewardship of the Sanctuary environment; and (4) assisting to develop an...

  5. Reliability and validity of a talent identification test battery for seated and standing Paralympic throws.

    Science.gov (United States)

    Spathis, Jemima Grace; Connick, Mark James; Beckman, Emma Maree; Newcombe, Peter Anthony; Tweedy, Sean Michael

    2015-01-01

    Paralympic throwing events for athletes with physical impairments comprise seated and standing javelin, shot put, discus and seated club throwing. Identification of talented throwers would enable prediction of future success and promote participation; however, a valid and reliable talent identification battery for Paralympic throwing has not been reported. This study evaluates the reliability and validity of a talent identification battery for Paralympic throws. Participants were non-disabled so that impairment would not confound analyses, and results would provide an indication of normative performance. Twenty-eight non-disabled participants (13 M; 15 F) aged 23.6 years (±5.44) performed five kinematically distinct criterion throws (three seated, two standing) and nine talent identification tests (three anthropometric, six motor); 23 were tested a second time to evaluate test-retest reliability. Talent identification test-retest reliability was evaluated using Intra-class Correlation Coefficient (ICC) and Bland-Altman plots (Limits of Agreement). Spearman's correlation assessed strength of association between criterion throws and talent identification tests. Reliability was generally acceptable (mean ICC = 0.89), but two seated talent identification tests require more extensive familiarisation. Correlation strength (mean rs = 0.76) indicated that the talent identification tests can be used to validly identify individuals with competitively advantageous attributes for each of the five kinematically distinct throwing activities. Results facilitate further research in this understudied area.

  6. Using haptic feedback to increase seat belt use of service vehicle drivers.

    Science.gov (United States)

    2011-01-01

    This study pilot-tested a new application of a technology-based intervention to increase seat belt use. The technology was based on a : contingency in which unbelted drivers experienced sustained haptic feedback to the gas pedal when they exceeded 25...

  7. 78 FR 73506 - Submission for OMB Review; Comment Request: Infant Bath Seats

    Science.gov (United States)

    2013-12-06

    ... mark or other means that identifies the date (month and year, as a minimum) of manufacture. Section 9... instructions with infant bath seats thus would be ``usual and customary'' and not within the definition of... a GS-12 level, salaried employee. The average hourly wage rate for a mid-level salaried GS-12...

  8. Seat Capacity Selection for an Advanced Short-Haul Aircraft Design

    Science.gov (United States)

    Marien, Ty V.

    2016-01-01

    A study was performed to determine the target seat capacity for a proposed advanced short-haul aircraft concept projected to enter the fleet by 2030. This analysis projected the potential demand in the U.S. for a short-haul aircraft using a transportation theory approach, rather than selecting a target seat capacity based on recent industry trends or current market demand. A transportation systems model was used to create a point-to-point network of short-haul trips and then predict the number of annual origin-destination trips on this network. Aircraft of varying seat capacities were used to meet the demand on this network, assuming a single aircraft type for the entire short-haul fleet. For each aircraft size, the ticket revenue and operational costs were used to calculate a total market profitability metric for all feasible flights. The different aircraft sizes were compared, based on this market profitability metric and also the total number of annual round trips and markets served. Sensitivity studies were also performed to determine the effect of changing the aircraft cruise speed and maximum trip length. Using this analysis, the advanced short-haul aircraft design team was able to select a target seat capacity for their design.

  9. Descriptive Study of Electromagnetic Wave Distribution for Various Seating Positions: Using Digital Textbooks

    Science.gov (United States)

    Seomun, GyeongAe; Kim, YoungHwan; Lee, Jung-Ah; Jeong, KwangHoon; Park, Seon-A; Kim, Miran; Noh, Wonjung

    2014-01-01

    To better understand environmental electromagnetic wave exposure during the use of digital textbooks by elementary school students, we measured numeric values of the electromagnetic fields produced by tablet personal computers (TPCs). Specifically, we examined the distribution of the electromagnetic waves for various students' seating positions in…

  10. Evaluation of a rural demonstration program to increase seat belt use in the Great Lakes Region.

    Science.gov (United States)

    2009-03-01

    Six States in the Great Lakes Region (Region 5) participated in a Rural Demonstration Program to increase seat belt : use in rural areas and among high-risk occupants, such as young males and occupants of pickup trucks. These : efforts, which include...

  11. Correlations in back-to-back hadron production in SIDIS

    Energy Technology Data Exchange (ETDEWEB)

    Avakian, Harut [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Pisano, Silvia [National Inst. of Nuclear Physics (INFN), Frascati (Italy). National Lab. of Frascati (INFN-LNF)

    2016-08-01

    The Deep Inelastic Scattering (DIS) proved to be a great tool in testing of the theory of strong in- teractions. Semi-Inclusive DIS (SIDIS), with detection of an additional hadron allowed first stud- ies of 3D structure of the nucleon, moving the main focus from testing the QCD to understanding of strong interactions and quark gluon dynamics to address a number of puzzles accumulated in recent years. Detection of two hadrons in SIDIS, which is even more complicated, provides ac- cess to details of quark gluon interactions inaccessible in single-hadron SIDIS, providing a new avenue to study the complex nucleon structure. Large acceptance of the CLAS detector at Jef- ferson Lab, allowing detection of two hadrons, produced back-to-back (b2b) in the current and target fragmentation regions, provides a unique possibility to study the nucleon structure in target fragmentation region, and correlations of target and current fragmentation regions

  12. [Upper extremities, neck and back symptoms in office employees working at computer stations].

    Science.gov (United States)

    Zejda, Jan E; Bugajska, Joanna; Kowalska, Małgorzata; Krzych, Lukasz; Mieszkowska, Marzena; Brozek, Grzegorz; Braczkowska, Bogumiła

    2009-01-01

    To obtain current data on the occurrence ofwork-related symptoms of office computer users in Poland we implemented a questionnaire survey. Its goal was to assess the prevalence and intensity of symptoms of upper extremities, neck and back in office workers who use computers on a regular basis, and to find out if the occurrence of symptoms depends on the duration of computer use and other work-related factors. Office workers in two towns (Warszawa and Katowice), employed in large social services companies, were invited to fill in the Polish version of Nordic Questionnaire. The questions included work history and history of last-week symptoms of pain of hand/wrist, elbow, arm, neck and upper and lower back (occurrence and intensity measured by visual scale). Altogether 477 men and women returned the completed questionnaires. Between-group symptom differences (chi-square test) were verified by multivariate analysis (GLM). The prevalence of symptoms in individual body parts was as follows: neck, 55.6%; arm, 26.9%; elbow, 13.3%; wrist/hand, 29.9%; upper back, 49.6%; and lower back, 50.1%. Multivariate analysis confirmed the effect of gender, age and years of computer use on the occurrence of symptoms. Among other determinants, forearm support explained pain of wrist/hand, wrist support of elbow pain, and chair adjustment of arm pain. Association was also found between low back pain and chair adjustment and keyboard position. The findings revealed frequent occurrence of symptoms of pain in upper extremities and neck in office workers who use computers on a regular basis. Seating position could also contribute to the frequent occurrence of back pain in the examined population.

  13. Variation between seated and standing/walking postures among male and female call centre operators

    Directory of Open Access Journals (Sweden)

    Toomingas Allan

    2012-03-01

    Full Text Available Abstract Background The dose and time-pattern of sitting has been suggested in public health research to be an important determinant of risk for developing a number of diseases, including cardiovascular disorders and diabetes. The aim of the present study was to assess the time-pattern of seated and standing/walking postures amongst male and female call centre operators, on the basis of whole-shift posture recordings, analysed and described by a number of novel variables describing posture variation. Methods Seated vs. standing/walking was recorded using dichotomous inclinometers throughout an entire work shift for 43 male and 97 female call centre operators at 16 call centres. Data were analysed using an extensive set of variables describing occurrence of and switches between seated and standing/walking, posture similarity across the day, and compliance with standard recommendations for computer work. Results The majority of the operators, both male and female, spent more than 80% of the shift in a seated posture with an average of 10.4 switches/hour between seated and standing/walking or vice versa. Females spent, on average, 11% of the day in periods of sustained sitting longer than 1 hour; males 4.6% (p = 0.013. Only 38% and 11% of the operators complied with standard recommendations of getting an uninterrupted break from seated posture of at least 5 or 10 minutes, respectively, within each hour of work. Two thirds of all investigated variables showed coefficients of variation between subjects above 0.5. Since work tasks and contractual break schedules were observed to be essentially similar across operators and across days, this indicates that sedentary behaviours differed substantially between individuals. Conclusions The extensive occurrence of uninterrupted seated work indicates that efforts should be made at call centres - and probably in other settings in the office sector - to introduce more physical variation in terms of standing

  14. Overtreating chronic back pain: time to back off?

    Science.gov (United States)

    Deyo, Richard A; Mirza, Sohail K; Turner, Judith A; Martin, Brook I

    2009-01-01

    Chronic back pain is among the most common patient complaints. Its prevalence and impact have spawned a rapidly expanding range of tests and treatments. Some of these have become widely used for indications that are not well validated, leading to uncertainty about efficacy and safety, increasing complication rates, and marketing abuses. Recent studies document a 629% increase in Medicare expenditures for epidural steroid injections; a 423% increase in expenditures for opioids for back pain; a 307% increase in the number of lumbar magnetic resonance images among Medicare beneficiaries; and a 220% increase in spinal fusion surgery rates. The limited studies available suggest that these increases have not been accompanied by population-level improvements in patient outcomes or disability rates. We suggest a need for a better understanding of the basic science of pain mechanisms, more rigorous and independent trials of many treatments, a stronger regulatory stance toward approval and post-marketing surveillance of new drugs and devices for chronic pain, and a chronic disease model for managing chronic back pain.

  15. Lack of conformity between Indian classroom furniture and student dimensions: proposed future seat/table dimensions.

    Science.gov (United States)

    Savanur, C S; Altekar, C R; De, A

    2007-10-01

    Children spend one-quarter of a day in school. Of this, 60-80% of time is spent in the classroom. Classroom features, such as workspace and personal space play an important role in children's growth and performance as this age marks the period of anatomical, physiological and psychological developments. Since the classroom is an influential part of a student's life the present study focused on classroom furniture in relation to students' workspace and personal space requirements and standards and was conducted in five schools at Mumbai, India. Dimensions of 104 items of furniture (chairs and desks) were measured as were 42 anthropometric dimensions of 225 students from grade six to grade nine (age: 10-14 years). Questionnaire responses of 292 students regarding the perceived adequacy of their classroom furniture were collected. Results indicated that the seat and desk heights (450 mm, 757 mm respectively) were higher than the comparable students' anthropometric dimensions and that of the recommendations of Bureau of Indian Standards (BIS) (340 + 3 mm, 380 + 3 mm seat-heights, 580 + 3 mm 640 + 3 mm desk-heights) as well as Time-Saver Standards (TSS) (381.0 mm seat-height and 660.4 mm desk-height). The depth of the seats and the desks (299 mm, 319 mm, respectively) were less than comparable students' anthropometric dimensions and the recommendations of BIS (IS 4837: 1990). Students reported discomfort in shoulder, wrist, knee and ankle regions. Based on the students' anthropometric data, proposed future designs with fixed table-heights and adjustable seat-heights along with footrests were identified.

  16. Prevalence and factors associated to back pain in adults from the northeast of São Paulo, Brazil: a population-based study

    Directory of Open Access Journals (Sweden)

    Alberto De Vitta

    Full Text Available Abstract Introduction: Back pain has become a serious public health problem. Objective: To determine the prevalence of back pain in a population-based sample of subjects over 20 years old living in the city of Bauru (São Paulo, Brazil and to analyze the associations to variables- sociodemographic, ergonomic and lifestyle-related - and to morbidity. Methods: a cross-sectional study which evaluated 600 adults over 20 years old, both gender and living in the city. We used a structured protocol and the Nordic questionnaire. Also, we developed a descriptive analysis, bivariate and multivariate by binary logistic regression. Results: The prevalence of back pain was of 50.3% (CI 46.3 to 54.3, since 42.3% (CI 36.9 to 48.0 in men and 57.6% (CI 51.9 to 63.0 in women, with statistical significant difference (p = 0.001. Different variables remained in final models when assessed by gender. For male to be widowed and divorced and smoking habits and, for women to be widowed and divorced, to work in seated position and to perform occupational activities that demand carrying and lifting weight. Conclusion: We verified high prevalence in back pain in the population of Bauru and high association to widowed/divorced in both gender, with women performing occupational activities usually or always in seated position, those who carry or lift weight in work and men who smoke.

  17. Development of a multi-body nonlinear model for a seat-occupant system

    Science.gov (United States)

    Azizi, Yousof

    A car seat is an important component of today's cars, which directly affects ride comfort experienced by occupants. Currently, the process of ride comfort evaluation is subjective. Alternatively, the ride comfort can be evaluated by a series of objective metrics in the dynamic response of the occupant. From previous studies it is well known that the dynamic behavior of a seat-occupant system is greatly affected by soft nonlinear viscoelastic materials used in the seat cushion. Therefore, in this research, especial attention was given to efficiently modeling the behavior of seat cushion. In the first part of this research, a phenomenological nonlinear viscoelastic foam model was proposed and its ability to capture uniaxial behavior of foam was investigated. The model is based on the assumption that the total stress can be decomposed into the sum of a nonlinear elastic component, modeled by a higher order polynomial of strain, and a nonlinear hereditary type viscoelastic component. System identification procedures were developed to estimate the model parameters using uniaxial cyclic compression data from experiments conducted at different rates on two types of low density polyurethane foams and three types of high density CONFOR foams. The performance of the proposed model was compared to that of other traditional continuum models. For each foam type, it was observed that lower order models are sufficient to describe the uniaxial behavior of the foam compressed at different rates. Although, the estimated model parameters were functions of the input strain rate. Alternatively, higher order comprehensive models, with strain independent parameters, were estimated as well. The estimated comprehensive model predicts foam responses under different compression rates. Also, a methodology was proposed to predict the stress-response of a layered foam system using the estimated models of each foam in the layers. Next, the estimated foam model was incorporated into a single

  18. Scintigraphic examinations concerning back pain

    International Nuclear Information System (INIS)

    Mueller-Brand, J.

    1983-01-01

    Radinuclide skeletal scintigraphy is recognized as a screening method for patients with back pain. The analog scintigram is a functional image with high sensitivity and low specificity. The improvement in specificity can be achieved using computer procedures as digital imaging, smoothing, contrast enhancement and profile selection to quantitate certain properties of the scan. Three-phase-skeletal scintigraphy, 67-Ga-citrate or 111-In labeled leucocytes augement the specificity, too. (orig.)

  19. Centrifuge-induced neck and back pain in F-16 pilots: a report of four cases.

    Science.gov (United States)

    Lange, Britt; Nielsen, René Tyranski; Skejø, Pernille Bro; Toft, Palle

    2013-07-01

    Early in their careers, as an important part of their training to become fighter pilots, pilots undergo centrifuge training in order to learn effective anti-G straining maneuvers (AGSM) and to test their G tolerance. The exposure of pilots, especially early in their careers, to training that could lead to injuries should be avoided. This is a report of four cases of neck pain experienced during G-tolerance training, some of which may have caused ongoing problems for the pilot. Four cases, describing four different injuries experienced during G-tolerance training, are presented, including the history of the incident, radiographic description, and physical examination. Three main questions were identified in regards to the training of fighter pilots in centrifuges: 1) should the seat be positioned to imitate a specific aircraft's seat? 2) should the pilot wear a helmet and a mask? 3) what is the appropriate amount of head support? Based on the four cases reported it is recommended that pilots should be given the best possible conditions concerning neck support and load on the neck and the back for G-tolerance testing. Training the pilot in an anatomical neutral sitting position, without a helmet, and with maximal neck support minimizes head movements in cases of conscious or unconscious loss of muscle control. To test the stability of the neck in a setup similar to the environment where the pilot is going to operate, the pilot should be given the opportunity to prepare himself or herself accordingly in advance.

  20. A study on the Horizontal Control of a Seat for Heavy Machinery using a Phase Adjusting Technique

    Directory of Open Access Journals (Sweden)

    Kim Chae-sil.

    2016-01-01

    Full Text Available This study proposes a dynamic plant model to simulate the performance of a heavy equipment vehicle seat system. The system controls the transmission of vibration using a phase adjustment control method. First, a dynamic model for the flexible heavy equipment seat is proposed using a commercial multi-body dynamic analysis tool, ADAMS. This model is used as a plant model. Then a phase adjustment control mechanism for reducing the vibration and shock transmitted by the seat is applied to the driving dynamics control plant model. Angle control using the phase adjustment control was confirmed. This technique is expected to be the basis for a future commercial system.

  1. Returning to sports after a back injury

    Science.gov (United States)

    ... medlineplus.gov/ency/patientinstructions/000518.htm Returning to sports after a back injury To use the sharing ... Back pain - returning to sports Which Type of Sport is Best? In deciding when and if to ...

  2. Task-related and person-related variables influence the effect of low back pain on anticipatory postural adjustments.

    Science.gov (United States)

    Jacobs, Jesse V; Lyman, Courtney A; Hitt, Juvena R; Henry, Sharon M

    2017-08-01

    People with low back pain exhibit altered postural coordination that has been suggested as a target for treatment, but heterogeneous presentation has rendered it difficult to identify appropriate candidates and protocols for such treatments. This study evaluated the associations of task-related and person-related factors with the effect of low back pain on anticipatory postural adjustments. Thirteen subjects with and 13 without low back pain performed seated, rapid arm flexion in self-initiated and cued conditions. Mixed-model ANOVA were used to evaluate group and condition effects on APA onset latencies of trunk muscles, arm-raise velocity, and pre-movement cortical potentials. These measures were evaluated for correlation with pain ratings, Fear Avoidance Beliefs Questionnaire scores, and Modified Oswestry Questionnaire scores. Delayed postural adjustments of subjects with low back pain were greater in the cued condition than in the self-initiated condition. The group with low back pain exhibited larger-amplitude cortical potentials than the group without pain, but also significantly slower arm-raise velocities. With arm-raise velocity as a covariate, the effect of low back pain remained significant for the latencies of postural adjustments but not for cortical potentials. Latencies of the postural adjustments significantly correlated with Oswestry and Fear Avoidance Beliefs scores. Delayed postural adjustments with low back pain appear to be influenced by cueing of movement, pain-related disability and fear of activity. These results highlight the importance of subject characteristics, task condition, and task performance when comparing across studies or when developing treatment of people with low back pain. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Muscle Power during Standing and Seated Trunk Rotations with Different Weights

    Directory of Open Access Journals (Sweden)

    Erika Zemková

    2017-10-01

    Full Text Available This study compares peak and mean power during standing and seated trunk rotations with different weights. Twenty seven fit men completed four trials of trunk rotations in both standing and seated positions with a bar weight of 5.5, 10.5, 15.5, and 20 kg placed on the shoulders. The FiTRO Torso Premium was used to monitor basic biomechanical parameters throughout the movement. Results showed significantly higher peak power during standing than seated trunk rotations at weights of 20 kg (274.4±63.5 vs. 206.4±54.6 W, p=0.004, 15.5 kg (371.2±93.9 vs. 313.5±72.3 W, p=0.007, and 10.5 kg (336.9±77.8 vs. 286.3±66.0 W, p=0.009 but not at 5.5 kg (191.6±46.2 vs. 166.0±37.0 W, p=0.061. Similarly, mean power in the acceleration phase of trunk rotations was significantly higher when performed in standing than seated position at weights of 20 kg (143.2±32.1 vs. 101.9±23.7 W, p=0.008, 15.5 kg (185.1±42.3 vs. 150.4±36.5 W, p=0.019, and 10.5 kg (169.8±40.7 vs. 139.7±31.6 W, p=0.024 but not at 5.5 kg (107.4±29.4 vs. 86.5±21.1 W, p=0.111. Furthermore, peak and mean power during standing trunk rotations significantly correlated with values achieved in the seated position at the weight of 5.5 kg (r=0.684, p=0.027; r=0.676, p=0.033 but not at 10.5 kg (r=0.589, p=0.089; r=0.552, p=0.143, 15.5 kg (r=0.493, p=0.243; r=0.436, p=0.298, and 20 kg (r=0.357, p=0.361; r=0.333, p=0.417. In conclusion, power production is greater during standing as compared to seated trunk rotations, with more pronounced differences at higher weights. This fact has to be taken into account when training and testing the trunk rotational power.

  4. Low back pain during pregnancy

    Directory of Open Access Journals (Sweden)

    Maria Emília Coelho Costa Carvalho

    2017-05-01

    Full Text Available Objective: Low back pain is a common complaint among pregnant women. It is estimated that about 50% of pregnant women complain of some form of back pain at some point in pregnancy or during the postpartum period. The aim of this study was to evaluate the frequency of low back pain during pregnancy and its characteristics. Methods: Cross-sectional study with low-risk pregnant women. After approval by the Human Research Ethics Committee and receiving written informed consent, we included pregnant women over 18 years of age and excluded those with psychiatric disorders, previous lumbar pathologies, and receiving treatment for low back pain. Results: We interviewed 97 pregnant women. The frequency of low back pain was 68%. The mean age was 26.2 years and the median gestational age was 30 weeks. Fifty-eight pregnant women declared themselves as brown (58%. Most (88.6% were married or living in common-law marriage, 56 (57.7% worked outside the home, and 71 (73.2% had completed high school. Low back pain was more frequent during the second trimester of pregnancy (43.9%, referred to as a “burning” sensation in 37.8% of patients, with intermittent frequency in 96.9% of the women. The symptoms got worse at night (71.2%. Resting reduced low back pain in 43.9% of pregnant women, while the standing position for a long time worsened it in 27.2% of patients. Conclusion: Low back pain is common in pregnant women, has specific characteristics, and is more frequent in the second trimester of pregnancy. This indicates the need for prevention strategies that enable better quality of life for pregnant women. Resumo: Objetivo: A lombalgia é uma queixa comum entre grávidas. Estima-se que cerca de 50% das gestantes queixam-se de algum tipo de dor lombar em algum momento da gravidez ou durante o puerpério. O objetivo deste estudo foi avaliar a frequência da lombalgia na gestação e suas características. Método: Estudo de corte transversal com gestantes de

  5. Vital Sign Monitoring Through the Back Using an UWB Impulse Radar With Body Coupled Antennas.

    Science.gov (United States)

    Schires, Elliott; Georgiou, Pantelis; Lande, Tor Sverre

    2018-04-01

    Radar devices can be used in nonintrusive situations to monitor vital sign, through clothes or behind walls. By detecting and extracting body motion linked to physiological activity, accurate simultaneous estimations of both heart rate (HR) and respiration rate (RR) is possible. However, most research to date has focused on front monitoring of superficial motion of the chest. In this paper, body penetration of electromagnetic (EM) wave is investigated to perform back monitoring of human subjects. Using body-coupled antennas and an ultra-wideband (UWB) pulsed radar, in-body monitoring of lungs and heart motion was achieved. An optimised location of measurement in the back of a subject is presented, to enhance signal-to-noise ratio and limit attenuation of reflected radar signals. Phase-based detection techniques are then investigated for back measurements of vital sign, in conjunction with frequency estimation methods that reduce the impact of parasite signals. Finally, an algorithm combining these techniques is presented to allow robust and real-time estimation of both HR and RR. Static and dynamic tests were conducted, and demonstrated the possibility of using this sensor in future health monitoring systems, especially in the form of a smart car seat for driver monitoring.

  6. Assessment of back pain in horses

    International Nuclear Information System (INIS)

    Cauvin, E.

    1997-01-01

    Back pain is common in horses yet, in many cases, a definitive diagnosis remains elusive. The aim of this article is to present a systematic approach to the patient with a suspected back problem. For the present purposes, back pain is defined as pain arising from the thoracolumbar or sacral spine and associated soft tissues. Examination of the pelvis is also included

  7. When the Ocean Strikes Back

    DEFF Research Database (Denmark)

    Gebauer, Mirjam

    2013-01-01

    The disaster scenario is one of the predominant settings we find unfold in the pop-cultural imagination, namely in films and novels. In recent years, as increased awareness of environmental issues affect the agendas of public debate, we also see local and increasingly global environmental disasters...... is evolving caused by an intelligent life form of the deep sea striking back at mankind. This article aims at discussing in what ways The Swarm uses elements and patterns of the pop-cultural disaster imagination, specifically the disaster and science fiction movie of the 1990s. Furthermore, it investigates...

  8. Afterloading technique for interstitial irradiation of lesions in deep-seated organs

    International Nuclear Information System (INIS)

    Kitagawa, T.; Kakehi, M.; Kunieda, T.; Tsukiyama, I.; Hamada, M.; Inakoshi, H.; Sakudo, M.; Suemasu, K.; Matsumoto, K.; Yoneyama, T.; Iizuka, T.; Nomura, K.; Kawachi, K.

    1982-01-01

    An afterloading procedure using 192 Ir seeds was developed for the control of both localized primary lesions that are difficult to remove and superficial residual lesions that remain after the partial removal of tumors in relatively inaccessible, deep-seated organs. This technique makes possible the delivery of a minimal radiation dose to lesions in deep-seated organs. Fewer complications result, the seeds can be adjusted at appropriate intervals in proportion to the amount of radioactivity desired, and radiation exposure to personnel can be reduced. This paper describes the techniques and apparatus used to place the seeds in the tubing. Primary lesions of the urinary bladder, the prostate gland, and the esophagus, residual lesions in the brain and lung, and metastases in intrapelvic lymph nodes were treated. No technical difficulties or complications were encountered. Radiation exposures to personnel were minimized. The results indicate that the procedure has practical applications

  9. Hemodynamic responses to seated and supine lower body negative pressure - Comparison with +Gz acceleration

    Science.gov (United States)

    Polese, Alvese; Sandler, Harold; Montgomery, Leslie D.

    1992-01-01

    The hemodynamic responses to LBNP in seated subjects and in subjects in supine body positions were compared and were correlated with hemodynamic changes which occurred during a simulated (by centrifugation) Shuttle reentry acceleration with a slow onset rate of 0.002 G/s and during gradual onset exposures to +3 Gz and +4 Gz. Results demonstrate that seated LBNP at a level of -40 mm Hg can serve as a static simulator for changes in the heart rate and in mean blood pressure induced by gradual onset acceleration stress occurring during Shuttle reentry. The findings also provide a rationale for using LBNP during weightlessness as a means of imposing G-loading on the circulation prior to reentry.

  10. Seat headrest-incorporated personalized ventilation: Thermal comfort and inhaled air quality

    DEFF Research Database (Denmark)

    Melikov, Arsen Krikor; Ivanova, T.; Stefanova, G.

    2012-01-01

    inhaled by the manikin was measured and used to assess the clean air supply efficiency of the SHPV. The response of 35 subjects was collected to examine thermal comfort with the SHPV. The subjects participated in 3 experiments at personalized air temperature and room air temperature of 22/20 °C, 23/23 °C......The performance of personalized ventilation with seat headrest-mounted air supply terminal devices (ATD), named seat headrest personalized ventilation (SHPV), was studied. Physical measurements using a breathing thermal manikin were taken to identify its ability to provide clean air to inhalation...... depending on design, shape, size and positioning of the ATD, flow rate and temperature of personalized air, room temperature, clothing thermal insulation of the manikin, etc. Tracer gas was mixed with the room air. The air supplied by the SHPV was free of tracer gas. Tracer gas concentration in the air...

  11. Seat belt syndrome with unstable Chance fracture dislocation of the second lumbar vertebra without neurological deficits.

    Science.gov (United States)

    Onu, David O; Hunn, Andrew W; Bohmer, Robert D

    2014-01-08

    The seat belt syndrome is a recognised complication of seat belt use in vehicles. Unstable Chance fractures of the spine without neurological deficits have been reported infrequently. We describe a young woman with completely disrupted Chance fracture of the second lumbar vertebra in association with left hemidiaphragmatic rupture/hernia, multiple bowel perforations, splenic capsular tear, left humeral shaft and multiple rib fractures. These injuries which resulted from high-speed vehicle collision and led to death of one of the occupants were readily detected by trauma series imaging. The patient was successfully treated by a dedicated multidisciplinary team which adopted a staged surgical approach and prioritisation of care. There were no manifested neurological or other deficits after 1 year of follow-up. To the authors' knowledge, this is the first report of such a case in Australasia. We discuss the challenging surgical management, highlighting the role of radiological imaging in such cases and provide a literature review.

  12. Rotor dynamic studies of a vertical sodium pump supported on a spherical seat

    International Nuclear Information System (INIS)

    Asokkumar, S.; Ramalingam, P.; Baskar, S.; Balachander, K.; Kale, R.D.

    1994-01-01

    One of the important areas in the mechanical design of Primary Sodium Pumps (PSP) concerns with the problem of accommodating the differential thermal expansion between the pump support and the discharge pipe which function at substantially different temperatures. A spherical ball resting on a spherical split seat is designed to allow the tilting of the pump without creating significant stresses in the pump casing and the discharge pipe. To ascertain the dynamic performance of the pump and to validate the design, an experimental study was carried out with a 1/4 model spherical seat installed in an existing 50 cu.m/hr pump. The paper discusses the modeling criteria, details of theoretical/experimental studies and results obtained during testing. This paper also discusses details of full size test rig which is under construction. (author). 4 refs., 3 figs., 2 tabs

  13. A Qualitative Case Study on the Implementation of a Priority Seating Program at an NCAA Division I School

    National Research Council Canada - National Science Library

    Delich, Joseph R

    2004-01-01

    ...) athletic department's priority seating program. A qualitative case study was the chosen methodology and the use of personal interviews and documents were the primary sources of evidence for data collection...

  14. Comparative Assessment of Torso and Seat Mounted Restraint Systems using Manikins on the Vertical Deceleration Tower

    Science.gov (United States)

    2017-03-01

    AFRL-RH-WP-TR-2017-0044 Comparative Assessment of Torso and Seat Mounted Restraint Systems using Manikins on the Vertical ...Restraint Systems using Manikins on the Vertical Deceleration Tower 5a. CONTRACT NUMBER FA8650-14-D-6500-0001 5b. GRANT NUMBER 5c. PROGRAM...experimental effort involving a series of +z-axis impact tests was conducted on the 711th Human Performance Wing’s Vertical Deceleration Tower (VDT

  15. Radiologic findings of deep seated cerebral arteriovenous malformation with nonvisualization of straight sinus: focused on angiogram

    International Nuclear Information System (INIS)

    Won, Jong Boo; Park, Sung Ho; Hong, Jong Won; Kim, Yoo Kyoung; Shin, Mi Jeong; Baik, Seung Kuk; Choi, Han Yong; Kim, Bong Gi

    1999-01-01

    To analyze the radiologic-especially angiographic-findings of deep seated cerebral arteriovenous malformation(AVM) involving nonvisualized straight sinus. In six patients aged between 15 and 53 years with deep seated cerebral AVM, CT and MR images were retrospectively analyzed with regard to the following features : the presence of straight sinus, the location of AVM, and the occurrence of hemorrhage. Angiograms were analyzed for venous drainage routes of AVM, the appearance of veins, the presence of falcine sinus and venous drainage from normal deep brain parenchyme. In four patients who had undergone intravascular embolization therapy, pre- and post- embolization angiograms were compared. CT and MR images showed neither straight sinus nor thrombosis. AVMs were deeply seated in the brain, and in all cases there was cerebral hemorrhage. Angiograms disclosed that venous drainage of all AVMs occurred via the veins of Galen. In one case, venous flow via the falcine sinus to the superior sagittal sinus was noted, but in others, retrograde flow in the deep venous system was observed. Marked collateral routes followed in response to the obstruction of straight sinus included the basal vein of Rosenthal, the internal occipital, internal cerebral, and cerebellar hemispheric veins (which are Galenic afferents), and the inferior sagittal sinus. In all patients, contralateral routes were partially involved. Venous drainage from normal deep parenchyme through the transcerebral veins to the superficial venous system was noted, and in one case, straight sinus which had been observed on an angiogram five years earlier was no longer present. Angiography offers effective evaluation of the dynamic aspect of venous flow in cases involving deep-seated AVM, and of normal deep parenchyme in cases in which AVM involves nonvisualized straight sinus. Before intravascular treatment of AVM, venous flow must be carefully analyzed

  16. Inversion kinematics at deep-seated gravity slope deformations revealed by trenching techniques

    OpenAIRE

    Pasquaré Mariotto, Federico; Tibaldi, Alessandro

    2016-01-01

    We compare data from three deep-seated gravitational slope deformations (DSGSDs) where palaeoseismological techniques were applied in artificial trenches. At all trenches, located in metamorphic rocks of the Italian Alps, there is evidence of extensional deformation given by normal movements along slip planes dipping downhill or uphill, and/or fissures, as expected in gravitational failure. However, we document and illustrate – with the aid of trenching – evidenc...

  17. Computed tomography-guided percutaneous core needle biopsy of deep seated bone lesions in two dogs

    International Nuclear Information System (INIS)

    Mori, T.; Sakaida, M.; Yamada, M.; Akiyama, H.; Takai, Y.; Sakai, H.; Maruo, K.

    2006-01-01

    Computed Tomography (CT)-guided percutaneous core needle biopsies were undertaken for the diagnosis of osteosarcoma in the pelvis (case 1) and myeloma (case 2) in the seventh lumber vertebra which were difficult to targeted by palpation, ultrasound or fluoroscopy. In both cases, enough tissue for pathological diagnosis were obtained without any complication. CT-guided biopsy was thought to be a safe, easy and effective technique for the evaluation of the deep seated bone lesion

  18. Accessing hospital packaged foods and beverages : the importance of a seated posture when eating

    OpenAIRE

    Bell, Alison; Tapsell, Linda; Walton, Karen; Yoxall, Alaster

    2017-01-01

    Background: Hospitalised and community dwelling older people (65 years and over), have difficulties opening food and beverage items such as cheese portions and tetra packs served in public hospitals. Previously, the role of hand strength on successful pack opening has been explored in a seated position. However, as many people in hospital eat in bed, this laboratory study examined the differences between participants opening a selection of products both in a hospital bed and a chair.\\ud Metho...

  19. The Role of Seat Belt in the Prevention of Fatalities and ...

    African Journals Online (AJOL)

    TNHJOURNALPH

    The study was a retrospective study conducted in ... The Role of Seat Belt in Determining Road Traffic Accident Outcomes - Akinbami B.O.. Lagos State is .... The highest number of injured was in 1982 and the lowest in 1977. (figure 1). Table J: Demopaphla ot rcNUJ. accicleau in riven ~.Nigeria from liiOOI5 toJ01J ill Mia sa.

  20. Effect of interpolation on parameters extracted from seating interface pressure arrays

    OpenAIRE

    Michael Wininger, PhD; Barbara Crane, PhD, PT

    2015-01-01

    Interpolation is a common data processing step in the study of interface pressure data collected at the wheelchair seating interface. However, there has been no focused study on the effect of interpolation on features extracted from these pressure maps, nor on whether these parameters are sensitive to the manner in which the interpolation is implemented. Here, two different interpolation paradigms, bilinear versus bicubic spline, are tested for their influence on parameters extracted from pre...

  1. Burn from car seat heater in a man with paraplegia: case report

    Science.gov (United States)

    Benjamin, Cheryl; Gittler, Michelle; Lee, Ray

    2011-01-01

    Objective/background Heated car seats are a common feature in newer automobiles. They are increasingly being recognized as potential hazards as there have been multiple reports of significant burns to its users. The potential for harm is considerably increased in those with impaired sensation with the possibility of a devastating injury. Methods Case report and literature review. Results A 26-year-old male with a T8 ASIA A paraplegia presented to the outpatient clinic for management of a hip burn. Two weeks prior to his visit he was driving a 2004 Jeep Cherokee for approximately 30 minutes. He was unaware that the driver's side seat warmer was set on high. He denied that his seat belt was in direct contact with the skin of his right hip. He presented to an acute care hospital that evening with a hip burn where he was prescribed silver sulfadiazine cream and instructed to apply it until his scheduled follow-up clinic visit. In clinic, the hip wound was unstageable with approximately 95% eschar. A dressing of bismuth tribromophenate in petrolatum was applied to the wound and he was instructed to change the dressing daily. This was later changed to an antimicrobial alginate dressing. The ulcer eventually healed. Conclusions This case illustrates the significant risk of car seat heaters in individuals with spinal cord injuries or neurological impairment who have decreased sensation. Additionally, it highlights an atypical area of potential for burn. Furthermore, it emphasizes the need for a heightened awareness for this unique and dangerous situation. PMID:21756574

  2. Modelling flow and heat transfer around a seated human body by computational fluid dynamics

    DEFF Research Database (Denmark)

    Sørensen, Dan Nørtoft; Voigt, Lars Peter Kølgaard

    2003-01-01

    A database (http://www.ie.dtu.dk/manikin) containing a detailed representation of the surface geometry of a seated female human body was created from a surface scan of a thermal manikin (minus clothing and hair). The radiative heat transfer coefficient and the natural convection flow around...... of the computational manikin has all surface features of a human being; (2) the geometry is an exact copy of an experimental thermal manikin, enabling detailed comparisons between calculations and experiments....

  3. LHC Report: Back in operation

    CERN Multimedia

    2016-01-01

    With the machine back in their hands since Friday, 4 March, the LHC operators are now performing the powering tests on the magnets. This is a crucial step before receiving the first beams and restarting Run 2 for physics.   A Distribution Feed-Box (DFB) brings power to the LHC magnets and maintains the stability of the current in the superconducting circuits. The LHC was the last machine to be handed back to operators after the completion of maintenance work carried out during the Year-End Technical Stop (YETS) that had started on 14 December 2015. During the eleven weeks of scheduled maintenance activities, several operations took place in all the accelerators and beam lines. They included the maintenance in several points of the cryogenic system, the replacement of 18 magnets in the Super Proton Synchrotron; an extensive campaign to identify and remove thousands of obsolete cables; the replacement of the LHC beam absorbers for injection (TDIs) that are used to absorb the SPS b...

  4. Reduction of low frequency vibration of truck driver and seating system through system parameter identification, sensitivity analysis and active control

    Science.gov (United States)

    Wang, Xu; Bi, Fengrong; Du, Haiping

    2018-05-01

    This paper aims to develop an 5-degree-of-freedom driver and seating system model for optimal vibration control. A new method for identification of the driver seating system parameters from experimental vibration measurement has been developed. The parameter sensitivity analysis has been conducted considering the random excitation frequency and system parameter uncertainty. The most and least sensitive system parameters for the transmissibility ratio have been identified. The optimised PID controllers have been developed to reduce the driver's body vibration.

  5. In-situ Study of Seating Static Comfort in Passenger Vehicles

    Directory of Open Access Journals (Sweden)

    Seraj Umi Salmah

    2018-01-01

    Full Text Available In today’s automotive market, comfort is huge selling point of a vehicle. Priority is given by buyers to how comfortable a seat feels during purchase decisions. The measure of comfort is harmonious mix of many aspects such as human ergonomics and physiological factors. However, a gap still exists between objective and subjective measures due to lack of emphasis by past researchers. This is particularly obvious in the lumbar support feature that has still not been able to address the health problems related to driving. This project focuses on bridging the gap by giving users the ability to define true preferred posture in realistic settings. This is done by the creation of a apparatus that allows users to individually manipulate the seat contour for optimum support in more segments than just lumbar area. The experiment is performed in 3 parts, where in each part different segments of the apparatus are manipulatable (lumbar segment, sacral & thoracic segment, and all segments. Sixty human subjects’ statistics are recorded (gender, age, BMI and height and the subjects are palpated to locate internal joints. These joints are marked and postural angles between them are measured using a goniometer. In each seat configuration, the angles are measured and a comfort rating is taken to be compared. It was found that the posture angles are different among the 3 experiments, and there is a change in comfort felt. Some human factors have also been proven to contribute heavily to angles chosen by occupants.

  6. Resection of deep-seated gliomas using neuroimaging for stereotactic placement of guidance catheters

    Energy Technology Data Exchange (ETDEWEB)

    Matsumoto, Kengo; Higashi, Hisato; Tomita, Susumu; Furuta, Tomohisa; Ohmoto, Takashi [Okayama Univ. (Japan). School of Medicine

    1995-03-01

    A simple computed tomography- (CT) or magnetic resonance (MR) imaging-guided stereotactic method for guided microsurgical resection of either deep-seated gliomas or tumors adjacent to an eloquent area is described. The technique employs the Brown-Roberts-Wells stereotactic system and twist drills, 2.7 mm in diameter, for the stereotactic placement of 2.4 mm diameter scaled guidance catheters through the calvaria. In a patient with a deep-seated small glioma, less than 2 cm diameter, one catheter was implanted into the center of the enhanced mass through the cerebral cortex. In the other 14 patients, three to six catheters were used which made the tumor border clearer. After implantation of the guidance catheters, the stereotactic frame was removed and a standard open craniotomy performed. Target localization is not affected by brain movement, which is inevitable during open surgery. The tumor involved the frontal lobe in eight patients, the parietal lobe in two, and the thalamus in five. In all cases the lesion was quickly localized and radical removal was acheived. Neurological complications occurred in only one patient who suffered transient hemiparesis after the resection of a lesion in the pyramidal tract. The results demonstrate that microsurgery combined with CT- or MR imaging-guided stereotactic placement of guidance catheters is a new option for surgery of deep-seated gliomas or tumors adjacent to an eloquent area. (author).

  7. Advocacy for booster seat legislation in Florida: a lesson in politics and policy formation.

    Science.gov (United States)

    Haring, R Sterling; Frattaroli, Shannon; Schneider, Eric B; Holland, M Becker; Vernick, Jon S

    2015-04-01

    MVCs are a major contributor to child injury and death. Infant restraint seats and child booster seats have been shown to reduce the odds of severe injury or death when used correctly. While all states have mandated the use of these restraint systems, the age at which a child can be legally restrained using an adult seat belt varies from state to state. Efforts to strengthen Florida's weak child restraint laws have failed for more than a decade; in the 2014 legislative session, advocates succeeded in raising the state's age requirement from 3 years to 5  years. While many factors contributed to this year's success, some key elements included efficient communication of supporting data, a strong and broad advocacy network and the leveraging of election year political rivalries. Efforts to further strengthen the law will continue into future legislative sessions. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  8. The efficacy of airflow and seat vibration on reducing visually induced motion sickness.

    Science.gov (United States)

    D'Amour, Sarah; Bos, Jelte E; Keshavarz, Behrang

    2017-09-01

    Visually induced motion sickness (VIMS) is a well-known sensation in virtual environments and simulators, typically characterized by a variety of symptoms such as pallor, sweating, dizziness, fatigue, and/or nausea. Numerous methods to reduce VIMS have been previously introduced; however, a reliable countermeasure is still missing. In the present study, the effect of airflow and seat vibration to alleviate VIMS was investigated. Eighty-two participants were randomly assigned to one of four groups (airflow, vibration, combined airflow and vibration, and control) and then exposed to a 15 min long video of a bicycle ride shot from first-person view. VIMS was measured using the Fast Motion Sickness Scale (FMS) and the Simulator Sickness Questionnaire (SSQ). Results showed that the exposure of airflow significantly reduced VIMS, whereas the presence of seat vibration, in contrast, did not have an impact on VIMS. Additionally, we found that females reported higher FMS scores than males, however, this sex difference was not found in the SSQ scores. Our findings demonstrate that airflow can be an effective and easy-to-apply technique to reduce VIMS in virtual environments and simulators, while vibration applied to the seat is not a successful method.

  9. Comparison between a Computational Seated Human Model and Experimental Verification Data

    Directory of Open Access Journals (Sweden)

    Christian G. Olesen

    2014-01-01

    Full Text Available Sitting-acquired deep tissue injuries (SADTI are the most serious type of pressure ulcers. In order to investigate the aetiology of SADTI a new approach is under development: a musculo-skeletal model which can predict forces between the chair and the human body at different seated postures. This study focuses on comparing results from a model developed in the AnyBody Modeling System, with data collected from an experimental setup. A chair with force-measuring equipment was developed, an experiment was conducted with three subjects, and the experimental results were compared with the predictions of the computational model. The results show that the model predicted the reaction forces for different chair postures well. The correlation coefficients of how well the experiment and model correlate for the seat angle, backrest angle and footrest height was 0.93, 0.96, and 0.95. The study show a good agreement between experimental data and model prediction of forces between a human body and a chair. The model can in the future be used in designing wheelchairs or automotive seats.

  10. Enhancement of control rod drive mechanism seating position detector for JRR-3

    International Nuclear Information System (INIS)

    Ohuchi, Satoshi; Kurumada, Osamu; Kamiishi, Eigo; Sato, Masayuki; Ikekame, Yoshinori; Wada, Shigeru

    2016-06-01

    The purpose of the control rod drive mechanism seating position detector for JRR-3 is one of methods for confirming the shutdown condition of the reactor and sending out the seat position signal to other systems. The detector has been utilizing more than 25 years with maintenance regularly. However, some troubles occurred recently. Moreover, the detector has already been discontinued, and it is confirmed that the successor detector is unsuitable for the control rod drive mechanism of JRR-3. Therefore, it was necessary to select the adequate detector to the control rod drive mechanism of JRR-3. Accordingly, we built a test device with the aim of verifying several detectors for integrity and function. At the time of the test for performance confirmation, it was occurred unexpected problems. Nevertheless, we devise improvement of the problems and took measures. Thus we were able to make adequate detector for JRR-3 and replace to enhanced detector. This paper reports the Enhanced of Control rod drive mechanism seating position detector. (author)

  11. An evaluation method on seat comfort based on optical motion capture

    Directory of Open Access Journals (Sweden)

    Qing TAO

    2015-10-01

    Full Text Available To research the sitting posture comfort evaluation method, through the example of comfort evaluation of the ergonomic seat and standard office seat, a methodology is introduced to evaluate the sitting posture comfort combining ergonomics theory. The proposed method is based on optical motion capture system, pressure sensor and JACK software, and TRC file is acquired by using EVART real-time capture software for identifying the spatial motion trail of human body. Then MATLAB software is used to analyze the human body motion data, and the sitting posture angle difference data for human body in different seats is acquired. TRC file is loaded into JACK software, and with the TAT REPORTER of JACK software, muscle force, moment of force and fatigue data, etc. are output, which are compared with the actual measured data from experiments, and ergonomics method is used for the evaluation. The result shows that the method of considering joint angles combining JACK software for data output is effective for evaluating sitting comfort.

  12. Delineation of potential deep seated landslides in a watershed using environmental index

    Science.gov (United States)

    Lai, Siao Ying; Lin, Chao Yuan; Lin, Cheng Yu

    2016-04-01

    The extreme rainfall induced deep seated landslides cause more attentions recently. Extreme rainfall can accelerate soil moisture content and surface runoff in slopeland which usually results in severe headward erosion and slope failures in an upstream watershed. It's a crucial issue for disaster prevention to extract the sites of potential deep seated landslide dynamically. Landslide risk and scale in a watershed were well discussed in this study. Risk of landslide occurrence in a watershed can be calculated from the multiplication of hazard and vulnerability for a certain event. A synthesis indicator derived from the indices of inverted extreme rainfall, road development and inverted normalized difference vegetation index can be effectively used as vulnerability for a watershed before the event. Landslide scale estimated from the indices of soil depth, headward erosion, river concave and dip slope could be applied to locate the hotspots of deep seated landslide in a watershed. The events of Typhoon Morakot in 2009 and Soudelor in 2015 were also selected in this study to verify the delineation accuracy of the model for the references of related authorities.

  13. Seat pan and backrest pressure distribution while sitting in office chairs.

    Science.gov (United States)

    Zemp, Roland; Taylor, William R; Lorenzetti, Silvio

    2016-03-01

    Nowadays, an increasing amount of time is spent seated, especially in office environments, where sitting comfort and support are increasingly important due to the prevalence of musculoskeletal disorders. The aim of this study was to develop a methodology for chair-specific sensor mat calibration, to evaluate the interconnections between specific pressure parameters and to establish those that are most meaningful and significant in order to differentiate pressure distribution measures between office chairs. The shape of the exponential calibration function was highly influenced by the material properties and geometry of the office chairs, and therefore a chair-specific calibration proved to be essential. High correlations were observed between the eight analysed pressure parameters, whereby the pressure parameters could be reduced to a set of four and three parameters for the seat pan and the backrest respectively. In order to find significant differences between office chairs, gradient parameters should be analysed for the seat pan, whereas for the backrest almost all parameters are suitable. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  14. The influence of occupant anthropometry and seat position on ejection risk in a rollover.

    Science.gov (United States)

    Atkinson, Theresa; Fras, Andrew; Telehowski, Paul

    2010-08-01

    During rollover crashes, ejection increases an occupant's risk of severe to fatal injury as compared to risks for those retained in the vehicle. The current study examined whether occupant anthropometry might influence ejection risk. Factors such as restraint use/disuse, seating position, vehicle type, and roll direction were also considered in the analysis. The current study examined occupant ejections in 10 years of National Automotive Sampling System (NASS) single-event rollovers of passenger vehicles and light trucks. Statistical analysis of unweighted and weighted ejection data was carried out. No statistically significant differences in ejection rates were found based on occupant height, age, or body mass index. Drivers were ejected significantly more frequently than other occupants: 62 percent of unrestrained drivers were ejected vs. 51 percent unrestrained right front occupants. Second row unrestrained occupants were ejected at rates similar to right front-seated occupants. There were no significant differences in ejection rates for near- vs. far-side occupants. These data suggest that assessment of ejection prevention systems using either a 50th or 5th percentile adult anthropomorphic test dummy (ATD) might provide a reasonable measure of system function for a broad range of occupants. They also support the development of ejection mitigation technologies that extend beyond the first row to protect occupants in rear seat positions. Future studies should consider potential interaction effects (i.e., occupant size and vehicle dimensions) and the influence of occupant size on ejection risk in non-single-event rollovers.

  15. Availability, functionality, and use of seat belts in Beijing taxis prior to the 2008 Beijing Olympic Games.

    Science.gov (United States)

    Fleiter, Judy J; Gao, Liping; Qiu, Chen; Shi, Kan

    2009-03-01

    Use of driver seat belts and availability and functionality of passenger seat belts in a convenience sample of 231 Beijing taxis were examined in the months prior to the 2008 Beijing Olympic Games. Driver and front passenger seat belt use was mandated in China from 2004 to help address the growing public health crisis of road trauma. Results from observations made by in-vehicle passengers revealed that 21.2% of drivers were correctly wearing a belt, approximately half were not, and one third were using the belt in a non-functional way. Over 3/4 of this sample of taxi drivers were unrestrained while working. The percentage of functionally available belts was higher for front than rear passengers (88.3% and 22.9%, respectively). This low rate of belt availability in rear seats calls into question the preparedness of the fleet to cater for the safety needs of foreign visitors to China, particularly those from countries with high levels of restraint use. Factors influencing the use/misuse of seat belts in China remain largely unexplored. Results of this pilot study support further investigations of barriers to using injury prevention mechanisms such as seat belts in less motorised countries.

  16. A subjective framework for seat comfort based on a heuristic multi criteria decision making technique and anthropometry.

    Science.gov (United States)

    Fazlollahtabar, Hamed

    2010-12-01

    Consumer expectations for automobile seat comfort continue to rise. With this said, it is evident that the current automobile seat comfort development process, which is only sporadically successful, needs to change. In this context, there has been growing recognition of the need for establishing theoretical and methodological automobile seat comfort. On the other hand, seat producer need to know the costumer's required comfort to produce based on their interests. The current research methodologies apply qualitative approaches due to anthropometric specifications. The most significant weakness of these approaches is the inexact extracted inferences. Despite the qualitative nature of the consumer's preferences there are some methods to transform the qualitative parameters into numerical value which could help seat producer to improve or enhance their products. Nonetheless this approach would help the automobile manufacturer to provide their seats from the best producer regarding to the consumers idea. In this paper, a heuristic multi criteria decision making technique is applied to make consumers preferences in the numeric value. This Technique is combination of Analytical Hierarchy Procedure (AHP), Entropy method, and Technique for Order Preference by Similarity to an Ideal Solution (TOPSIS). A case study is conducted to illustrate the applicability and the effectiveness of the proposed heuristic approach. Copyright © 2010 Elsevier Ltd. All rights reserved.

  17. A wireless lingual feedback device to reduce overpressures in seated posture: a feasibility study.

    Directory of Open Access Journals (Sweden)

    Olivier Chenu

    2009-10-01

    Full Text Available Pressure sores are localized injuries to the skin and underlying tissues and are mainly resulting from overpressure. Paraplegic peoples are particularly subjects to pressure sores because of long-time seated postures and sensory deprivation at the lower limbs.Here we report outcomes of a feasibility trial involving a biofeedback system aimed at reducing buttock overpressure whilst an individual is seated. The system consists of (1 pressure sensors, (2 a laptop coupling sensors and actuator (3 a wireless Tongue Display Unit (TDU consisting of a circuit embedded in a dental retainer with electrodes put in contact with the tongue. The principle consists in (1 detecting overpressures in people who are seated over long periods of time, (2 estimating a postural change that could reduce these overpressures and (3 communicating this change through directional information transmitted by the TDU.Twenty-four healthy subjects voluntarily participated in this study. Twelve healthy subjects initially formed the experimental group (EG and were seated on a chair with the wireless TDU inside their mouth. They were asked to follow TDU orders that were randomly spread throughout the session. They were evaluated during two experimental sessions during which 20 electro-stimulations were sent. Twelve other subjects, added retrospectively, formed the control group (CG. These subjects participated in one session of the same experiment without any biofeedback.Three dependent variables were computed: (1 the ability of subjects to reach target posture (EG versus CG, (2 high pressure reductions after a biofeedback (EG versus CG and (3 the level of these reductions relative to their initial values (EG only. Results show (1 that EG reached target postures in 90.2% of the trials, against 5,3% in the CG, (2 a significant reduction in overpressures in the EG compared to the CG and (3, for the EG, that the higher the initial pressures were, the more they were decreased

  18. A Wireless Lingual Feedback Device to Reduce Overpressures in Seated Posture: A Feasibility Study

    Science.gov (United States)

    Chenu, Olivier; Vuillerme, Nicolas; Demongeot, Jacques; Payan, Yohan

    2009-01-01

    Background Pressure sores are localized injuries to the skin and underlying tissues and are mainly resulting from overpressure. Paraplegic peoples are particularly subjects to pressure sores because of long-time seated postures and sensory deprivation at the lower limbs. Methodology/Principal Findings Here we report outcomes of a feasibility trial involving a biofeedback system aimed at reducing buttock overpressure whilst an individual is seated. The system consists of (1) pressure sensors, (2) a laptop coupling sensors and actuator (3) a wireless Tongue Display Unit (TDU) consisting of a circuit embedded in a dental retainer with electrodes put in contact with the tongue. The principle consists in (1) detecting overpressures in people who are seated over long periods of time, (2) estimating a postural change that could reduce these overpressures and (3) communicating this change through directional information transmitted by the TDU.Twenty-four healthy subjects voluntarily participated in this study. Twelve healthy subjects initially formed the experimental group (EG) and were seated on a chair with the wireless TDU inside their mouth. They were asked to follow TDU orders that were randomly spread throughout the session. They were evaluated during two experimental sessions during which 20 electro-stimulations were sent. Twelve other subjects, added retrospectively, formed the control group (CG). These subjects participated in one session of the same experiment without any biofeedback.Three dependent variables were computed: (1) the ability of subjects to reach target posture (EG versus CG), (2) high pressure reductions after a biofeedback (EG versus CG) and (3) the level of these reductions relative to their initial values (EG only). Results show (1) that EG reached target postures in 90.2% of the trials, against 5,3% in the CG, (2) a significant reduction in overpressures in the EG compared to the CG and (3), for the EG, that the higher the initial pressures

  19. Vibration transmitted to operator’s back by machines with back-pack power unit: a case study on blower and spraying machines

    Directory of Open Access Journals (Sweden)

    Roberto Deboli

    2013-09-01

    Full Text Available To correctly evaluate the vibration transmitted to the operators, it is necessary to consider each body’s point interested by the vibratory stimulus produced by machines. All the body’s part in contact to the vibration, when a portable device with internal combustion engine is used, are: hands, back and shoulders. Some information for wholebody vibration are available in the ISO 2631-1997 standard, which otherwise refers to a seated operator. ‘C’ type standards for the vibration analysis exist for some portable machines with an internal combustion engine which is comprehensive in the machine (chainsaw, brush-cutter, blower. If the engine is not inside the machine, but it is on the operator’s back, ‘C’ type standards on vibration measurements are quite incomplete. The IMAMOTER institute of CNR, the DISAFA Department (University of Turin and the Occupational Medicine Department of the University of Catania started some tests to verify the vibration levels transmitted to an operator working with backed engine devices. Two machines have been examined: a blower and a spraying machine. Two operative conditions have been considered during all the tests: idling and full load. Three operators have been involved and each test has been repeated three times. The spraying machine has been tested both with the empty tank and with 10 litres of water, to simulate the load to be caused by the presence of liquid inside the tank. In this work the comfort condition of ISO 2631-1 standard was considered, using the frequency weighting Wc curve with the weighting factor 0.8 for X axis (back-ventral direction and the Wd curve for Y and Z axis (shoulder - shoulder and buttocks - head with weighting factors 0.5 and 0.4 (respectively for Y and Z axis. Data were examined using IBM SPSS Statistics 20 software package. The statistical analysis underlined that the running condition is the main factor to condition the vibration levels transmitted to the operator

  20. Better backs by better beds?

    DEFF Research Database (Denmark)

    Bergholdt, Kim; Fabricius, Rasmus N; Bendix, Tom

    2008-01-01

    mattresses have a positive effect on LBP, and especially a hard mattress is commonly believed to have a positive effect. METHODS: One hundred sixty CLBP patients were randomized to 1 of 3 groups, having a mattress/bed mounted in their sleeping room for 1 month. The beds were: (1) waterbed (Akva), (2) body......-conforming foam mattress (Tempur), and (3) a hard mattress (Innovation Futon). At baseline and after 4 weeks, a blinded observer interviewed the patients on LBP levels (0-10), daily function (activities of daily living, 0-30), and on the amount of sleeping hours/night. RESULTS: Because of dropout of 19 patients...... using the probably most relevant "worst case" data. There were no relevant difference between the effects of the water bed and the foam bed. CONCLUSION: The Waterbed and foam mattress' did influence back symptoms, function and sleep more positively as apposed to the hard mattress, but the differences...

  1. Back to the 80s

    CERN Multimedia

    Fitness Club

    2010-01-01

    The fitness club is organizing a “Back to the 80s Party” in aid of the Haiti earthquake appeal on Saturday 26.06.2010 in the Pump Room.   There’s an 80s theme, so our pro DJ will be spinning 80s tunes (all tastes catered for), Morpho will be powering the visuals and the car club will be cooking-up a bbq in case you’re peckish. Fancy dress 1980s style is welcome, though not obligatory and it kicks off just after 'music on the lawn' finishes at 20.30. Its open to anyone working at CERN, friends and family. There’s a limited number of tickets and it’s entrance by ticket only, we are selling them on Thurs lunchtimes in R1 12.15 – 13.30 for 5CHF. For more information contact fitness.club@cern.ch.

  2. Looking Back at 'Purgatory Dune'

    Science.gov (United States)

    2005-01-01

    The wheels of NASA's Mars Exploration Rover Opportunity dug more than 10 centimeters (4 inches) deep into the soft, sandy material of a wind-shaped ripple in Mars' Meridiani Planum region during the rover's 446th martian day, or sol (April 26, 2005). Getting the rover out of the ripple, dubbed 'Purgatory Dune,' required more than five weeks of planning, testing, and carefully monitored driving. Opportunity used its navigation camera to capture this look back at the ripple during sol 491 (June 11, 2005), a week after the rover drove safely onto firmer ground. The ripple that became a sand trap is about one-third meter (one foot) tall and 2.5 meters (8 feet) wide.

  3. Alternative Packaging for Back-Illuminated Imagers

    Science.gov (United States)

    Pain, Bedabrata

    2009-01-01

    An alternative scheme has been conceived for packaging of silicon-based back-illuminated, back-side-thinned complementary metal oxide/semiconductor (CMOS) and charge-coupled-device image-detector integrated circuits, including an associated fabrication process. This scheme and process are complementary to those described in "Making a Back-Illuminated Imager With Back-Side Connections" (NPO-42839), NASA Tech Briefs, Vol. 32, No. 7 (July 2008), page 38. To avoid misunderstanding, it should be noted that in the terminology of imaging integrated circuits, "front side" or "back side" does not necessarily refer to the side that, during operation, faces toward or away from a source of light or other object to be imaged. Instead, "front side" signifies that side of a semiconductor substrate upon which the pixel pattern and the associated semiconductor devices and metal conductor lines are initially formed during fabrication, and "back side" signifies the opposite side. If the imager is of the type called "back-illuminated," then the back side is the one that faces an object to be imaged. Initially, a back-illuminated, back-side-thinned image-detector is fabricated with its back side bonded to a silicon handle wafer. At a subsequent stage of fabrication, the front side is bonded to a glass wafer (for mechanical support) and the silicon handle wafer is etched away to expose the back side. The frontside integrated circuitry includes metal input/output contact pads, which are rendered inaccessible by the bonding of the front side to the glass wafer. Hence, one of the main problems is to make the input/output contact pads accessible from the back side, which is ultimately to be the side accessible to the external world. The present combination of an alternative packaging scheme and associated fabrication process constitute a solution of the problem.

  4. Back-contacted back-junction silicon solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Mangersnes, Krister

    2010-10-15

    Conventional silicon solar cells have a front-side contacted emitter. Back-contacted back-junction (BC-BJ) silicon solar cells, on the other hand, have both the complete metallization and the active diffused regions of both polarities on the backside. World-record efficiencies have already been demonstrated for this type of cell design in production, both on cell and module level. However, the production of these cells is both complex and costly, and a further cost reduction in fabrication is needed to make electricity from BC-BJ silicon solar cells cost-competitive with electricity on the grid ('grid-parity'). During the work with this thesis, we have investigated several important issues regarding BC-BJ silicon solar cells. The aim has been to reduce production cost and complexity while at the same time maintaining, or increasing, the already high conversion efficiencies demonstrated elsewhere. This has been pursued through experimental work as well as through numerical simulations and modeling. Six papers are appended to this thesis, two of which are still under review in scientific journals. In addition, two patents have been filed based on the work presented herein. Experimentally, we have focused on investigating and optimizing single, central processing steps. A laser has been the key processing tool during most of the work. We have used the same laser both to structure the backside of the cell and to make holes in a double-layer of passivating amorphous silicon and silicon oxide, where the holes were opened with the aim of making local contact to the underlying silicon. The processes developed have the possibility of using a relatively cheap and industrially proven laser and obtain results better than most state-of-the-art laser technologies. During the work with the laser, we also developed a thermodynamic model that was able to predict the outcome from laser interaction with amorphous and crystalline silicon. Alongside the experimental work, we

  5. The effect of a 3-point harness restraint and car seat in whiplash-type lateral impacts.

    Science.gov (United States)

    Kumar, Shrawan; Ferrari, Robert; Narayan, Yogesh; Jones, Troy

    2006-01-01

    Seventeen healthy volunteers were subjected to right and left lateral impacts 5.0, 6.8, 9.2, and 16.8 m/s acceleration while positioned in a Volvo car seat with lap and shoulder seat belt restraint in laboratory setting. The purpose of this study was to determine the effect of using a standard 3-point lap and shoulder seat belt and Volvo car seat on the response of the cervical muscles to increasing low-velocity lateral impacts. A previous study of lateral impacts in a 5-point harness restraint with head and trunk in neutral posture suggests that the burden of impact is borne primarily by the splenius capitis muscle contralateral to the direction of impact. That study, however, used a nonstandard harness for automobiles, and other studies suggest that a lap-and-shoulder seat belt may increase the risk of whiplash injury. Triaxial accelerometers recorded the acceleration of the 1) sled, 2) torso at the shoulder level, and 3) head of the participant, while bilateral electromyograms of the sternocleidomastoids, trapezii, and splenii capitis were also recorded. For participants experiencing a right or left lateral impact, the muscle responses increased with increasing levels of acceleration (P trend to progressively decrease with increasing levels of acceleration. The peak head accelerations relative to the sled ranged from 2.5 to 10.6 m/s. When the impact was a right lateral impact, at the highest sled acceleration, the left splenius capitis generated 47% of its maximal voluntary contraction (MVC), and the left trapezius also 46% of its MVC; the left and right sternocleidomastoid, right splenius capitis, and right trapezius generated 29% or less of their MVC. For the highest level of acceleration in a left lateral impact, the right splenius capitis generated 48% of its MVC and the right trapezius 57% of the MVC, the left and right sternocleidomastoid, left splenius capitis, and left trapezius generated 29% or less of their MVC. In both directions of impact, the

  6. Reliability and responsiveness of the Self-Efficacy in Assessing, Training and Spotting wheelchair skills (SEATS) outcome measure.

    Science.gov (United States)

    Rushton, Paula W; Smith, Emma M; Miller, William C; Kirby, R Lee; Daoust, Geneviève

    2018-01-31

    The aim of this study was to evaluate the internal consistency, test-retest reliability and responsiveness of the Self-Efficacy in Assessing, Training and Spotting manual wheelchair skills (SEATS-M) and Self-Efficacy in Assessing, Training and Spotting power wheelchair skills (SEATS-P). A 2-week test-retest design was used with a convenience sample of occupational and physical therapists who worked at a provincial rehabilitation centre (inpatient and outpatient services). Sixteen participants completed the SEATS-M and 18 participants completed the SEATS-P. For the SEATS-M assessment, training, spotting and documentation sections, Cronbach's alpha coefficients ranged from 0.90 to 0.97, the 2-week intraclass correlation coefficients (ICC 1,1 ) ranged from 0.81 to 0.95, the standard error of measurements (SEM) ranged from 5.06 to 8.70 and the smallest real differences (SRD) ranged from 6.24 to 8.18. For the SEATS-P assessment, training, spotting and documentation sections, Cronbach's alpha coefficients ranged from 0.83 to 0.92, the ICCs ranged from 0.72 to 0.86, the SEMs ranged from 4.54 to 8.91 and the SRDs ranged from 5.90 to 8.27. There is preliminary evidence that both the SEATS-M and the SEATS-P have high internal consistency, good test-retest reliability and support for responsiveness. These tools can be used in evaluating clinician self-efficacy with assessing, training, spotting and documenting wheelchair skills included on the Wheelchair Skills Test. Implications for Rehabilitation There is preliminary evidence that the SEATS-M and SEATS-P are reliable and responsive outcome measures that can be used to evaluate the self-efficacy of clinicians to administer the Wheelchair Skills Program. Measurement of clinicians' self-efficacy in this area of practice may enable an enhanced understanding of the areas in which clinicians lack self-efficacy, thereby informing the development of improved knowledge translation interventions.

  7. The effect of chronic low back pain on tactile suppression during back movements.

    Science.gov (United States)

    Van Damme, Stefaan; Van Hulle, Lore; Danneels, Lieven; Spence, Charles; Crombez, Geert

    2014-10-01

    The aim of the present study was to examine whether tactile suppression, the phenomenon whereby tactile perception is suppressed during movement, would occur in the context of back movements. Of particular interest, it was investigated if tactile suppression in the back would be attenuated in those suffering from chronic low back pain. Individuals with chronic low back pain (N = 30) and a matched control group (N = 24) detected tactile stimuli on three possible locations (back, arm, chest) while performing a back or arm movement, or no movement. We hypothesized that the movements would induce tactile suppression, and that this effect would be largest for low-intense stimuli on the moving body part. We further hypothesized that, during back movements, tactile suppression on the back would be less pronounced in the chronic low back pain group than in the control group. The results showed the expected general tactile suppression effects. The hypothesis of back-specific attenuation of tactile suppression in the chronic low back pain group was not supported. However, back-specific tactile suppression in the chronic low back pain group was less pronounced in those who performed the back movements more slowly. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. The Practical Realities of Giving Back

    Directory of Open Access Journals (Sweden)

    Ashton Bree Wesner

    2014-07-01

    Full Text Available In this thematic section, authors consider practical ways of giving back to the communities in which they conduct research. Each author discusses their evolving thoughts on how to give back in these practical ways. Some of these authors discuss giving back by giving money, food, rides, parties, and water bottles. In other cases, authors discuss giving back by creating jobs in the short or long term, grant writing, advocacy, and education. Story-telling is also a theme that many of the authors in this section discuss. For some authors, non-material forms of giving back are critical—simply maintaining social ties to the communities in which they worked, or sharing humor. The authors consider the utility of their attempts at giving back, and in some cases present their personal philosophy or guidelines on the subject.

  9. Negative beliefs about low back pain are associated with persistent high intensity low back pain.

    Science.gov (United States)

    Ng, Sin Ki; Cicuttini, Flavia M; Wang, Yuanyuan; Wluka, Anita E; Fitzgibbon, Bernadette; Urquhart, Donna M

    2017-08-01

    While previous cross-sectional studies have found that negative beliefs about low back pain are associated with pain intensity, the relationship between back beliefs and persistent low back pain is not well understood. This cohort study aimed to examine the role of back beliefs in persistent low back pain in community-based individuals. A hundred and ninety-two participants from a previous musculoskeletal health study were invited to take part in a two-year follow-up study. Beliefs about back pain were assessed by the Back Beliefs Questionnaire (BBQ) at baseline and low back pain intensity was measured by the Chronic Pain Grade Questionnaire at baseline and follow-up. Of the 150 respondents (78.1%), 16 (10.7%) reported persistent high intensity low back pain, 12 (8.0%) developed high intensity low back pain, in 16 (10.7%) their high intensity low back pain resolved and 106 (70.7%) experienced no high intensity low back pain. While participants were generally positive about low back pain (BBQ mean (SD) = 30.2 (6.4)), those with persistent high intensity pain reported greater negativity (BBQ mean (SD) = 22.6 (4.9)). Negative beliefs about back pain were associated with persistent high intensity low back pain after adjusting for confounders (M (SE) = 23.5 (1.6) vs. >30.1 (1.7), p back beliefs were associated with persistent high intensity low back pain over 2 years in community-based individuals. While further longitudinal studies are required, these findings suggest that targeting beliefs in programs designed to treat and prevent persistent high intensity low back pain may be important.

  10. Pilates for low back pain.

    Science.gov (United States)

    Yamato, Tiê P; Maher, Christopher G; Saragiotto, Bruno T; Hancock, Mark J; Ostelo, Raymond W J G; Cabral, Cristina M N; Costa, Luciola C Menezes; Costa, Leonardo O P

    2016-01-01

    Non-specific low back pain is a major health problem worldwide. Interventions based on exercises have been the most commonly used treatments for patients with this condition. Over the past few years, the Pilates method has been one of the most popular exercise programmes used in clinical practice. To determine the effects of the Pilates method for patients with non-specific acute, subacute or chronic low back pain. We conducted the searches in CENTRAL, MEDLINE, EMBASE, CINAHL, PEDro and SPORTDiscus from the date of their inception to March 2014. We updated the search in June 2015 but these results have not yet been incorporated. We also searched the reference lists of eligible papers as well as six trial registry websites. We placed no limitations on language or date of publication. We only included randomized controlled trials that examined the effectiveness of Pilates intervention in adults with acute, subacute or chronic non-specific low back pain. The primary outcomes considered were pain, disability, global impression of recovery and quality of life. Two independent raters performed the assessment of risk of bias in the included studies using the 'Risk of bias' assessment tool recommended by The Cochrane Collaboration. We also assessed clinical relevance by scoring five questions related to this domain as 'yes', 'no' or 'unclear'. We evaluated the overall quality of evidence using the GRADE approach and for effect sizes we used three levels: small (mean difference (MD) 20% of the scale). We converted outcome measures to a common 0 to 100 scale when different scales were used. The search retrieved 126 trials; 10 fulfilled the inclusion criteria and we included them in the review (a total sample of 510 participants). Seven studies were considered to have low risk of bias, and three were considered as high risk of bias.A total of six trials compared Pilates to minimal intervention. There is low quality evidence that Pilates reduces pain compared with minimal

  11. Rehabilitation of Low Back Pain in Golfers

    OpenAIRE

    Finn, Christopher

    2013-01-01

    Context: Low back injuries are the most common injury in golf. Best practice guidelines for rehabilitation and prevention of these injuries are helpful for health care professionals and all golfers. Objective: To establish a best practice clinical model for low back pain in golfers from diagnosis through treatment and rehabilitation to return to golf. Evidence Acquisition: The PubMed database and Google Scholar were searched from 1993 to 2012 with the following keywords: golf and low back inj...

  12. Evaluation of the vibration attenuation properties of an air-inflated cushion with two different heavy machinery seats in multi-axis vibration environments including jolts.

    Science.gov (United States)

    Ji, Xiaoxu; Eger, Tammy R; Dickey, James P

    2017-03-01

    Seats and cushions can attenuate whole-body vibration (WBV) exposures and minimize health risks for heavy machine operators. We successfully developed neural network (NN) algorithms to identify the vibration attenuation properties for four different seating conditions (seat/cushion combinations), and implemented each of the NN models to predict the equivalent daily exposure A(8) values for various vehicles in the forestry and mining environments. We also evaluated the performance of the new prototype No-Jolt™ air-inflated cushion and the original cushion of each seat with jolt exposures. We observed that the air cushion significantly improved the vibration attenuation properties of the seat that initially had good performance, but not for the seat that had relatively poor vibration attenuation properties. In addition, operator's anthropometrics and sex influenced the performance of the air-inflated cushion when the vibration environment included jolt exposures. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Whole-body vibration training as a workplace-based sports activity for employees with chronic low-back pain.

    Science.gov (United States)

    Kaeding, T S; Karch, A; Schwarz, R; Flor, T; Wittke, T-C; Kück, M; Böselt, G; Tegtbur, U; Stein, L

    2017-12-01

    The goal of this randomized and controlled study was to examine whether whole-body vibration (WBV) training is able to reduce back pain and physical disability in seated working office employees with chronic low-back pain in a real-world setting. A total of 41 subjects (68.3% female/mean age 45.5±9.1 years/mean BMI 26.6±5.2) were randomly allocated to an intervention group (INT [n=21]) or a control group (CON [n=20]). The INT participated in WBV training 2.5 times per week for 3 months. The primary outcome was the change in the Roland and Morris disability questionnaire (RMQ) score over the study period. In addition, secondary outcomes included changes in the Oswestry Disability Index (ODI), the Work Ability Index Questionnaire, the quality of life questionnaire SF-36, the Freiburger activity questionnaire, and an isokinetic test of the musculature of the trunk. Compliance with the intervention in the INT reached a mean of 81.1%±31.2% with no long-lasting unwanted side effects. We found significant positive effects of 3 months of WBV training in the INT compared to the CON regarding the RMQ (P=.027), the ODI (P=.002), the SF-36 (P=.013), the Freiburger activity questionnaire (P=.022), the post-interventional sick-leave in the INT (P=.008), and trends regarding a positive effect of the intervention on the muscular capacity of the muscles of the trunk in flexion. WBV training seems to be an effective, safe, and suitable intervention for seated working employees with chronic low-back pain. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  14. Neural network construction via back-propagation

    International Nuclear Information System (INIS)

    Burwick, T.T.

    1994-06-01

    A method is presented that combines back-propagation with multi-layer neural network construction. Back-propagation is used not only to adjust the weights but also the signal functions. Going from one network to an equivalent one that has additional linear units, the non-linearity of these units and thus their effective presence is then introduced via back-propagation (weight-splitting). The back-propagated error causes the network to include new units in order to minimize the error function. We also show how this formalism allows to escape local minima

  15. Back to school at CERN

    CERN Multimedia

    2007-01-01

    The Education Group is expanding its courses for teachers: over 700 secondary school teachers will be going back to school at CERN this year. Thirty-seven teachers from various countries participated in the High School Teachers at CERN programme, with Rolf Landua, the head of the Education Group, Mick Storr, the Education Group’s programme coordinator and Robert Aymar, the CERN Director-General.From 3 to 8 July, CERN hosted the runners-up from the finals of the British Physics Olympiad, the prize for the winners being a trip to the International Physics Olympiad in Iran. The five students were invited to visit CERN to attend the summer student programme for three days. "This gives us an opportunity to study new subjects that are not necessarily part of the school curriculum. Even though I’ve heard about the various types of research, it is a real plus to be able to attend these lectures", explains Oliver Mac Farlane, a young stu...

  16. Chinese energy demand falls back

    Energy Technology Data Exchange (ETDEWEB)

    Smil, V.

    1977-10-01

    China's growth in energy demand and production declined in 1976, partly because of difficulty of sustaining a rapid 5.4 percent growth and partly because of the disruptions caused by a major earthquake and the deaths of Mao Tse-Tung and Chou En-Lai. The earthquake, which damaged all mines, the power station, refineries, and transportation lines in the Tangshan area, has had serious economic consequences. The failure to back up a growing coal industry with adequate investments and mechanization was recognized in 1975 and prompted a 10-year modernization program. Progress has been made with new mine shafts, pulverizing equipment, and the use of small mines for local industries. Oil and gas production increased after the discovery of new fields and the use of new technology in the hydrocarbon industries. Ports and terminal facilities to handle large tankers will increase China's oil export traffic. Electricity generation increased with new power facilities, although China's dependence on human and animal power is still a major factor. Changes in energy consumption patterns are developing, but industry still represents 50 percent and transportation less than 10 percent. (DCK)

  17. A bad back needs help

    Directory of Open Access Journals (Sweden)

    Gotway MB

    2011-08-01

    Full Text Available No abstract available. Article truncated at 150 words. Case Presentation History of Present Illness A 61-year-old man was admitted to the hospital with a 2 month complaint of atraumatic back pain, worsening over the previous two weeks. The patient described his pain as sharp, 10/10 in intensity, radiating to his ribs, right hip, and right groin, and aggravated by coughing, weight lifting, and movement. His pain was worse in the supine and prone positions, with some relief provided by sitting, and relieved with high doses of pain medications, topical lidocaine, menthol-containing skin ointments, and chiropractic adjustments. Over the 2 days prior to admission, the patient became increasingly desperate as a result of his pain, and drank several pints of vodka.Past Medical and Social HistoryThe patient is a retired machinist whose medical history includes fibromyalgia and binge drinking. He smokes three-quarters of a pack of cigarettes per day.Physical ExaminationPhysical examination showed normal vital signs and …

  18. High levels of incorrect use of car seat belts and child restraints in Fife--an important and under-recognised road safety issue.

    Science.gov (United States)

    Campbell, H; Macdonald, S; Richardson, P

    1997-03-01

    To pilot data collection instruments and to make a preliminary estimate of the level of incorrect use of car seat belts and child restraints in Fife, Scotland. Cross sectional survey of cars containing adults and children at a number of public sites across Fife in 1995 to assess use of car occupant restraints. Trained road safety officers assessed whether seat restraints were appropriate for the age of the passengers and whether restraints were used correctly. These assessments were based on standards published by the Child Accident Prevention Trust. The survey gathered data from 596 occupants in 180 cars: 327 adults and 269 children. Ten per cent of drivers who were approached refused to participate. Car occupant restraint was assessed in 180 drivers, 151 front seat passengers, and 265 rear seat passengers. Three hundred and sixty one occupants wore seat belts, 68 were restrained by a seat belt and booster cushion, 63 in toddler seats, 25 in two way seats, and 18 in rear facing infant carriers. Ninety seven per cent of drivers, 95% of front seat passengers, and 77% of rear seat passengers were restrained. However, in 98 (52%) vehicles at least one passenger was restrained by a device that was used incorrectly. Seven per cent of adults and 28% of children were secured incorrectly. The commonest errors were loose seat belts and restraint devices not adequately secured to the seat. Rates of incorrect use were highest in child seat restraints, reaching 60% with two way seats and 44% with rear facing infant seats. The incorrect use of car occupant restraints is an under-recognised problem, both by health professionals, and the general public. Incorrect use has been shown to reduce the effectiveness of restraints, can itself result in injury, and is likely to be an important factor in child passenger injuries. The correct use of car seat restraints merits greater attention in strategies aiming to reduce road traffic casualties. Areas of intervention that could be

  19. Do functional tests predict low back pain?

    Science.gov (United States)

    Takala, E P; Viikari-Juntura, E

    2000-08-15

    A cohort of 307 nonsymptomatic workers and another cohort of 123 workers with previous episodes of low back pain were followed up for 2 years. The outcomes were measured by symptoms, medical consultations, and sick leaves due to low back disorders. To study the predictive value of a set of tests measuring the physical performance of the back in a working population. The hypothesis was that subjects with poor functional capacity are liable to back disorders. Reduced functional performance has been associated with back pain. There are few data to show whether reduced functional capacity is a cause or a consequence of pain. Mobility of the trunk in forward and side bending, maximal isokinetic trunk extension, flexion and lifting strength, and static endurance of back extension were measured. Standing balance and foot reaction time were recorded with a force plate. Clinical tests for the provocation of back or leg pain were performed. Gender, workload, age, and anthropometrics were managed as potential confounders in the analysis. Marked overlapping was seen in the measures of the subjects with different outcomes. Among the nonsymptomatic subjects, low performance in tests of mobility and standing balance was associated with future back disorders. Among workers with previous episodes of back pain, low isokinetic extension strength, poor standing balance, and positive clinical signs predicted future pain. Some associations were found between the functional tests and future low back pain. The wide variation in the results questions the value of the tests in health examinations (e.g., in screening or surveillance of low back disorders).

  20. Accessing hospital packaged foods and beverages: the importance of a seated posture when eating.

    Science.gov (United States)

    Bell, A; Tapsell, L; Walton, K; Yoxall, A

    2017-06-01

    Hospitalised and community dwelling older people (aged 65 years and over) have difficulties opening certain food and beverage items (e.g. cheese portions and tetra packs) served in public hospitals. Previously, the role of hand strength on successful pack opening has been explored in a seated position. However, because many people in hospital eat in bed, the present laboratory study examined the differences between participants opening a selection of products in a hospital bed and a chair. The present study used a qualitative method (satisfaction) and quantitative methods (grip and pinch strength, dexterity, time and attempts) in two conditions (bed; chair) in a sample of well older community dwelling adults (n = 34). Packs tested included foil sealed thickened pudding, foil sealed thickened water, tetra pack, dessert, custard, jam, cereal, honey sachet and cheese portions. Honey sachets, cheese portions, foil sealed thickened pudding and tetra packs were the most difficult packs to open, with 15% of cheese portions unable to be opened in either the bed or chair posture. Although grip strength was consistent for each posture, pinch grips and dexterity were adversely affected by the bed posture. Lying in a hospital bed required greater pinch strength and dexterity to open packs. Eating in a seated position when in hospital has been shown to improve intake. The present study demonstrates that eating in a seated posture is also advantageous for opening the food and beverage packs used in the NSW hospital food service and supports the notion that patients should sit to eat in hospital. © 2016 The British Dietetic Association Ltd.

  1. Comparison of the Effects of Seated, Supine, and Walking Interset Rest Strategies on Work Rate.

    Science.gov (United States)

    Ouellette, Kristen A; Brusseau, Timothy A; Davidson, Lance E; Ford, Candus N; Hatfield, Disa L; Shaw, Janet M; Eisenman, Patricia A

    2016-12-01

    Ouellette, KA, Brusseau, TA, Davidson, LE, Ford, CN, Hatfield, DL, Shaw, JM, and Eisenman, PA. Comparison of the effects of seated, supine, and walking interset rest strategies on work rate. J Strength Cond Res 30(12): 3396-3404, 2016-The idea that an upright posture should be maintained during the interset rest periods of training sessions is pervasive. The primary aim of this study was to determine differences in work rate associated with 3 interset rest strategies. Male and female members of the CrossFit community (male n = 5, female n = 10) were recruited to perform a strenuous training session designed to enhance work capacity that involved both cardiovascular and muscular endurance exercises. The training session was repeated on 3 separate occasions to evaluate 3 interset rest strategies, which included lying supine on the floor, sitting on a flat bench, and walking on a treadmill (0.67 m·s). Work rate was calculated for each training session by summing session joules of work and dividing by the time to complete the training session (joules of work per second). Data were also collected during the interset rest periods (heart rate [HR], respiratory rate [RR], and volume of oxygen consumed) and were used to explain why one rest strategy may positively impact work rate compared with another. Statistical analyses revealed significant differences (p ≤ 0.05) between the passive and active rest strategies, with the passive strategies allowing for improved work rate (supine = 62.77 ± 7.32, seated = 63.66 ± 8.37, and walking = 60.61 ± 6.42 average joules of work per second). Results also suggest that the passive strategies resulted in superior HR, RR, and oxygen consumption recovery. In conclusion, work rate and physiological recovery were enhanced when supine and seated interset rest strategies were used compared with walking interset rest.

  2. Does knowledge of seat design and whiplash injury mechanisms translate to understanding outcomes?

    Science.gov (United States)

    Ivancic, Paul C

    2011-12-01

    Review of whiplash injury mechanisms and effects of anti-whiplash systems including active head restraint (AHR) and Whiplash Protection System (WHIPS). This article provides an overview of previous biomechanical and epidemiological studies of AHR and WHIPS and investigates whether seat design and biomechanical knowledge of proposed whiplash injury mechanisms translates to understanding outcomes of rear crash occupants. In attempt to reduce whiplash injuries, some newer automobiles incorporate anti-whiplash systems such as AHR or WHIPS. During a rear crash, mechanically based systems activate by occupant momentum pressing into the seatback whereas electronically based systems activate using crash sensors and an electronic control unit linked to the head restraint. To investigate the effects of AHR and WHIPS on occupant responses including head and neck loads and motions, biomechanical studies of simulated rear crashes have been performed using human volunteers, mathematical models, crash dummies, whole cadavers, and hybrid cadaveric/surrogate models. Epidemiological studies have evaluated the effects of AHR and WHIPS on reducing whiplash injury claims and lessening subjective complaints of neck pain after rear crashes. RESULTS.: Biomechanical studies indicate that AHR and WHIPS reduced the potential for some whiplash injuries but did not completely eliminate the injury risk. Epidemiological outcomes indicate reduced whiplash injury claims or subjective complaints of crash-related neck pain between 43 and 75% due to AHR and between 21% and 49% due to WHIPS as compared to conventional seats and head restraints. Yielding energy-absorbing seats aim to reduce occupant loads and accelerations whereas AHRs aim to provide early head support to minimize head and neck motions. Continued objective biomechanical and epidemiological studies of anti-whiplash systems together with industry, governmental, and clinical initiatives will ultimately lead to reduced whiplash injuries

  3. Use of a minimally invasive tubular retraction system for deep-seated tumors in pediatric patients.

    Science.gov (United States)

    Recinos, Pablo F; Raza, Shaan M; Jallo, George I; Recinos, Violette Renard

    2011-05-01

    Microsurgical removal is the preferred treatment for most deep-seated, intraaxial tumors in the pediatric population. The feasibility of surgery as an option has improved with advances in surgical technology and technique. Tubular retractors disperse retraction forces over a greater surface area than do conventional retractors, which can lower the risk of ischemic complications. The authors describe their experience utilizing a new tubular retractor system specifically designed for cranial applications in conjunction with frameless neuronavigation. The Vycor ViewSite retractor was used in 4 pediatric patients (ages 15 months and 9, 10, and 16 years) with deep-seated intraaxial tumors. The lesions included a papillary tumor of the pineal region, a low-grade astrocytoma in the occipital lobe, a dysembryoplastic neuroepithelial tumor arising from the basal ganglia, and an intraventricular low-grade glioma. The extent of white matter damage along the surgical trajectory (based on T2 or FLAIR and diffusion restriction/apparent diffusion coefficient signals) and the extent of resection were assessed on postoperative imaging. Satisfactory resection or biopsy was achieved in all patients. A comparison of pre- and postoperative MR imaging studies revealed evidence of white matter damage along the surgical trajectory in 1 patient. None of the patients demonstrated new neurological deficits postoperatively. Obtaining surgical access to deep-seated, intraaxial tumors is challenging. In this small series of pediatric patients, the combination of the ViewSite tubular retractor and frameless neuronavigation facilitated the surgical approach. The combination of these technologies adds to the armamentarium to safely approach tumors in deep locations.

  4. [Clinical analyses of patients with intractable epistaxis originated from deep-seated nasal cavity].

    Science.gov (United States)

    Xu, Tong; Li, Na; Jiang, Yan; Yu, Hailing; Yu, Longgang; Jiang, Ye

    2015-07-01

    To investigate the clinical features and management of intractable deep-seated epistaxis. Clinical data were analyzed retrospectively in 195 patients with intractable deep-seated epistaxis treated in Affiliated Hospital of Qingdao College between June 2008 and June 2014. The analyses included common risk factors, bleeding sites, treatments and therapeutic effects. SPSS 17.0 software was used to analyze the data. There were 162 males and 33 females, aged from 15 to 88 years old (mean 52 ± 16 years). One hundred and eighty-seven cases (95.9%) were unilateral and 8 cases (4.1%) were bilateral. One hundred and twenty-six cases (64.6%) had the history of hypertension or blood pressure higher than normal on admission. Eight patients were cured by nasal packing and appropriate drugs, and 187 patients were treated by endoscopy and electrocoagulation. The numbers of treatment needed to stop bleeding were 1 time in 184 cases (98.4%), 2 times in 3 cases (1.6%). Thirteen cases did not have certain bleeding point, while the other 174 had certain one or more bleeding sites. The rewarded bleeding sites were 222, which were found in the following different sites: posterior inferior nasal meatus (33.3%, 74 /222), olfactory cleft of nasal septum (26.6%, 59/222), the root of the middle turbinate (14.0%, 31/222), and so on. Hypertension and diabetes were risk factors (OR value was 3.411, 7.142, both P epistaxis are mainly found in males and are almost unilatera1. Hypertension and diabetes are the common risk factor. The most effective and safe treatment for intractable deep-seated epistaxis is electrocoagulation under nasal endoscopy.

  5. Rural and Urban Differences in Passenger-Vehicle-Occupant Deaths and Seat Belt Use Among Adults - United States, 2014.

    Science.gov (United States)

    Beck, Laurie F; Downs, Jonathan; Stevens, Mark R; Sauber-Schatz, Erin K

    2017-09-22

    Motor-vehicle crashes are a leading cause of death in the United States. Compared with urban residents, rural residents are at an increased risk for death from crashes and are less likely to wear seat belts. These differences have not been well described by levels of rurality. 2014. Data from the Fatality Analysis Reporting System (FARS) and the Behavioral Risk Factor Surveillance System (BRFSS) were used to identify passenger-vehicle-occupant deaths from motor-vehicle crashes and estimate the prevalence of seat belt use. FARS, a census of U.S. motor-vehicle crashes involving one or more deaths, was used to identify passenger-vehicle-occupant deaths among adults aged ≥18 years. Passenger-vehicle occupants were defined as persons driving or riding in passenger cars, light trucks, vans, or sport utility vehicles. Death rates per 100,000 population, age-adjusted to the 2000 U.S. standard population and the proportion of occupants who were unrestrained at the time of the fatal crash, were calculated. BRFSS, an annual, state-based, random-digit-dialed telephone survey of the noninstitutionalized U.S. civilian population aged ≥18 years, was used to estimate prevalence of seat belt use. FARS and BRFSS data were analyzed by a six-level rural-urban designation, based on the U.S. Department of Agriculture 2013 rural-urban continuum codes, and stratified by census region and type of state seat belt enforcement law (primary or secondary). Within each census region, age-adjusted passenger-vehicle-occupant death rates per 100,000 population increased with increasing rurality, from the most urban to the most rural counties: South, 6.8 to 29.2; Midwest, 5.3 to 25.8; West, 3.9 to 40.0; and Northeast, 3.5 to 10.8. (For the Northeast, data for the most rural counties were not reported because of suppression criteria; comparison is for the most urban to the second-most rural counties.) Similarly, the proportion of occupants who were unrestrained at the time of the fatal crash

  6. Standardized error severity score (ESS) ratings to quantify risk associated with child restraint system (CRS) and booster seat misuse.

    Science.gov (United States)

    Rudin-Brown, Christina M; Kramer, Chelsea; Langerak, Robin; Scipione, Andrea; Kelsey, Shelley

    2017-11-17

    Although numerous research studies have reported high levels of error and misuse of child restraint systems (CRS) and booster seats in experimental and real-world scenarios, conclusions are limited because they provide little information regarding which installation issues pose the highest risk and thus should be targeted for change. Beneficial to legislating bodies and researchers alike would be a standardized, globally relevant assessment of the potential injury risk associated with more common forms of CRS and booster seat misuse, which could be applied with observed error frequency-for example, in car seat clinics or during prototype user testing-to better identify and characterize the installation issues of greatest risk to safety. A group of 8 leading world experts in CRS and injury biomechanics, who were members of an international child safety project, estimated the potential injury severity associated with common forms of CRS and booster seat misuse. These injury risk error severity score (ESS) ratings were compiled and compared to scores from previous research that had used a similar procedure but with fewer respondents. To illustrate their application, and as part of a larger study examining CRS and booster seat labeling requirements, the new standardized ESS ratings were applied to objective installation performance data from 26 adult participants who installed a convertible (rear- vs. forward-facing) CRS and booster seat in a vehicle, and a child test dummy in the CRS and booster seat, using labels that only just met minimal regulatory requirements. The outcome measure, the risk priority number (RPN), represented the composite scores of injury risk and observed installation error frequency. Variability within the sample of ESS ratings in the present study was smaller than that generated in previous studies, indicating better agreement among experts on what constituted injury risk. Application of the new standardized ESS ratings to installation

  7. When Your Back Hurts: Don't Let Back Pain Knock You Flat

    Science.gov (United States)

    ... Your Back Hurts Don’t Let Back Pain Knock You Flat En español Send us your comments ... Complementary Health Approaches Halt the Hurt! References The SPORT Value Compass: Do the Extra Costs of Undergoing ...

  8. Well-circumscribed deep-seated lipomas of the upper extremity. A report of 13 cases.

    Science.gov (United States)

    Elbardouni, A; Kharmaz, M; Salah Berrada, M; Mahfoud, M; Elyaacoubi, M

    2011-04-01

    The purpose of this study is to determine if giant size is of bad prognosis in deep lipomas of the upper extremity. We report a retrospective study of 13 patients with deep-seated lipomas of the upper extremity treated during the period from April 1997 to April 2008. We evaluated the clinical and radiological characteristics, treatment and evolution profile of these patients. There were 10 women and three men, with an average age of 53 years (range 30-79 years). Seven of these lipomas were in the arm, one in the shoulder, and five in the forearm. Six lipomas were intramuscular, six intermuscular (three of them being attached to bone and labelled parosteal lipoma) and one epivaginal lipoma of the flexor tendon sheath. All patients presented a progressive slow-growing mass that was associated with radial paralysis in one case and carpal tunnel syndrome in one case. Plain radiographs showed a radiolucent soft-tissue image in all cases and an associated osteochondroma in one parosteal lipoma. Computer tomography (CT) or magnetic resonance imaging (MRI) suggested the lipomatous nature and benign characteristics of these deep lipomas that were giant in all cases (mean size: 7 cm). Lipoma marginal excision was performed and histopathological examination demonstrated features consistent with a benign lipoma. There was good function and no clinical recurrence was observed after a mean follow-up of three years. Giant deep-seated lipomas of the upper extremity are uncommon and can be intermuscular or intramuscular. A painless soft-tissue mass is the most frequent chief complaint. MRI with fat suppression suggests the diagnosis and studies the extension of deep lipoma. Marginal excision is the treatment of choice and histopathology eliminates diagnosis of well-differentiated liposarcoma. Appropriate evaluation of deep lipoma is to rule out malignancy by systematically performing MRI and biopsy. In contrast to deep-seated lipomas of the lower extremity or the retroperitoneal

  9. Real-world adjustments of driver seat and head restraint in Saab 9-3 vehicles.

    Science.gov (United States)

    Carlsson, Anna; Pipkorn, Linda; Kullgren, Anders; Svensson, Mats

    2017-05-19

    Whiplash-associated disorder (WAD), commonly denoted whiplash injury, is a worldwide problem. These injuries occur at relatively low changes of velocity (typically whiplash injury than males.  Improved seat design is the prevailing means of increasing the protection of whiplash injury for occupants in rear impacts. Since 1997, more advanced whiplash protection systems have been introduced on the market, the Saab Active Head Restraint (SAHR) being one of the most prominent. The SAHR-which is height adjustable-is mounted to a pressure plate in the seatback by means of a spring-resisted link mechanism.  Nevertheless, studies have shown that seats equipped with reactive head restraints (such as the SAHR) have a very high injury-reducing effect for males (∼60-70%) but very low or no reduction effect for females. One influencing factor could be the position of the head restraint relative to the head, because a number of studies have reported that adjustable head restraints often are incorrectly positioned by drivers.  The aim was to investigate how female and male Saab drivers adjust the seat in the car they drive the most. The seated positions of drivers in stationary conditions have been investigated in a total of 76 volunteers (34 females, 42 males) who participated in the study. Inclusion criteria incorporated driving a Saab 9-3 on a regularly basis. The majority of the volunteers (89%) adjusted the head restraint to any of the 3 uppermost positions and as many as 59% in the top position.  The average vertical distance between the top of the head and the top of the head restraint (offset) increase linearly with increasing statures, from an average of -26 mm (head below the head restraint) for small females to an average of 82 mm (head above the head restraint) for large males. On average, the offset was 23 mm for females, which is within a satisfactory range and in accordance with recommendations; the corresponding value for males was 72 mm.

  10. Comparison of photon beam qualities for treatment of deep seated tumours

    International Nuclear Information System (INIS)

    Ssengabi, J.

    1977-06-01

    Physical parameters that influence the quality of photon beams have been examined. The interaction of photon beams of different qualities from cobolt-60 gamma rays to 42 MV X-rays, with a patient-target region system has been investigated with a view to compare the photon beam qualities under specified irradiation conditions. The concept of integral dose and its use in photon beam intercomparison has been investigated. The results of the study have shown the inadequacy of a single beam parameter, such as the central axis depth dose data, in the intercomparison of photon beam qualities for the treatment of deep seated tumours. (author)

  11. The influence of heated or cooled seats on the acceptable ambient temperature range

    DEFF Research Database (Denmark)

    Zhang, Y.F.; Wyon, David Peter; Fang, Lei

    2007-01-01

    series, subjects were preconditioned to be too hot, while in other series they were preconditioned to be thermally neutral. They reported their thermal sensations, overall thermal acceptability and comfort on visual analogue scales at regular intervals. Instantaneous heat flow to the seat was measured...... continuously. At each ambient room temperature, the percentage dissatisfied was found to be a second-order polynomial function of local heat flow. Zero heat flow was preferred at an air temperature of 22 degrees C and the heat flow that minimized the percentage dissatisfied was found to be a single linear...

  12. Detecting MOV stem to stem-nut lubricant degradation by reviewing MOV {open_quotes}seating time{close_quotes}

    Energy Technology Data Exchange (ETDEWEB)

    Loweth, W.A.

    1996-12-01

    The objective is to describe a methodology, suitable for IST Programs, that obtains sufficient data to assess and trend the overall condition of AC and DC MOVs. Using existing diagnostic test equipment, recording the time from Hard Seat Contact to the Torque Switch Trip point (TST), {open_quote}Seating Time (msec){close_quotes}, can provide a means to quickly detect for signs of lubricant degradation in the interface between the stem and stem-nut for MOVs. Obtaining and trending the {open_quote}Seating Time{close_quote} parameter can be easily accomplished using the sensors which provide motor current, torque or thrust. From the initial baseline test to subsequent tests, it is the change in time between Hard Seat Contact to Torque Switch Trip point that is utilized to monitor changes in the coefficient of friction between the stem and stem-nut. While many Licensees have begun their MOV Periodic Verification Programs, obtaining the {open_quotes}Seating Time{close_quotes} during Refueling Outages and comparing the results from subsequent outages can be an input to the justification for changing the MOV baseline test frequency.

  13. Assessment of changes in spine curvatures and the sensations caused in three different types of working seats

    Directory of Open Access Journals (Sweden)

    Caique de Melo do Espírito Santo

    2017-08-01

    Full Text Available Abstract Aims This study aimed to evaluate the changes in the spine curvatures and the sensations caused by different types of seats: standard, ischial support and salli. Methods The analyzes were performed by the kinematics and scales of discomfort and pain in 14 healthy subjects. The data collection occurred in three days, one day for each type of seat. The subjects answered questionnaires and were assessed for placement of kinematic markers used to measure the thoracic, thoraco-lumbar and lumbar angles. Each trial was conducted in a sixty-minute period on each chair. Results and conclusions The results showed that the salli seat type causes larger lumbar angles, which is consistent with the maintenance of lumbar lordosis. Likewise, the salli seat showed smaller thoraco-lumbar angle, which is consistent with smaller inferior thoracic kyphosis. Paradoxically, the ischial support seat produced less discomfort and pain than salli type. And finally, the longer the sitting position was the higher the score on the discomfort scale.

  14. Localization techniques in resection of deep seated cavernous angiomas - review and reevaluation of frame based stereotactic approaches.

    Science.gov (United States)

    Slotty, P J; Ewelt, C; Sarikaya-Seiwert, S; Steiger, H-J; Vesper, J; Hänggi, D

    2013-04-01

    Providing high accuracy is crucial in neurosurgery especially for resection of deep seated small cerebral pathologies such as cavernous angiomas. The goal of the present series was to reevaluate the feasibility, accuracy, efficacy and safety of frame-based, stereotactically guided resection for patients suffering from small deep-seated cavernous angiomas. Additionally a review of the literature on navigational tools in cavernoma surgery is provided comparing different navigation strategies. Ten patients with deep-seated, small intracranial, cavernous angiomas being subject to frame-based, stereotactically aided resection are included in this survey. Based on the stereotactic-fused image, set entry and target point aimed at the rim of the cavernoma were calculated. A minicraniotomy (Assets and drawbacks of the stereotactic-aided approach were evaluated, patients were analyzed for surgery-related neurological deficits and completeness of resection. Complete resection was achieved in all ten patients verified by post-surgery MRI imaging. The surgical procedure itself was only slightly aggravated by the stereotactic equipment. No adverse events such as bleedings or infections were observed in our series. Stereotactically guided, minimally invasive resection of deep seated and small cavernous angiomas is accurate and effective. The frame-based stereotactic guidance requires some additional time and effort which seems justified only for deep seated and small cavernous angiomas. Frameless neuronavigation is a common tool in cavernoma surgery and its spatial resolution is sufficient for the majority of cases.

  15. Detecting MOV stem to stem-nut lubricant degradation by reviewing MOV open-quotes seating timeclose quotes

    International Nuclear Information System (INIS)

    Loweth, W.A.

    1996-01-01

    The objective is to describe a methodology, suitable for IST Programs, that obtains sufficient data to assess and trend the overall condition of AC and DC MOVs. Using existing diagnostic test equipment, recording the time from Hard Seat Contact to the Torque Switch Trip point (TST), open-quote Seating Time (msec)close quotes, can provide a means to quickly detect for signs of lubricant degradation in the interface between the stem and stem-nut for MOVs. Obtaining and trending the open-quote Seating Time close-quote parameter can be easily accomplished using the sensors which provide motor current, torque or thrust. From the initial baseline test to subsequent tests, it is the change in time between Hard Seat Contact to Torque Switch Trip point that is utilized to monitor changes in the coefficient of friction between the stem and stem-nut. While many Licensees have begun their MOV Periodic Verification Programs, obtaining the open-quotes Seating Timeclose quotes during Refueling Outages and comparing the results from subsequent outages can be an input to the justification for changing the MOV baseline test frequency

  16. Effectiveness of a Seat Pad in Reducing Back Pain in Long-Distance Drivers Deployed to Kuwait, October 2008-May 2009

    Science.gov (United States)

    2009-12-01

    and strains of sacroiliac ligament D 8 3 846.2 Sprains and strains of sacrospinatus (ligament) D 8 3 846.3 Sprains and strains of sacrotuberous...ligament) D 8 3 846.8 Sprains and strains of sacrotuberous (ligament) D 8 3 846.9 Sprains and strains of unspecified site of sacroiliac region D 8...ligament) D 8 3 846.1 Sprains and strains of sacroiliac ligament D 8 846.2 Sprains and strains of sacrospinatus (ligament) 846.3 Sprains and strains of

  17. Get the Monkey off Your Back

    Science.gov (United States)

    Ciabattini, David; Custer, Timothy J.

    2008-01-01

    Monkeys are the problems that need solutions, the tasks that need to be accomplished, the decisions that need to be made, and the actions that need to be taken. According to a theory, people carry monkeys around on their backs until they can successfully shift their burden to someone else and the monkey leaps from one back to the next. Managers…

  18. Attention modulates sensory suppression during back movements.

    Science.gov (United States)

    Van Hulle, Lore; Juravle, Georgiana; Spence, Charles; Crombez, Geert; Van Damme, Stefaan

    2013-06-01

    Tactile perception is often impaired during movement. The present study investigated whether such sensory suppression also occurs during back movements, and whether this would be modulated by attention. In two tactile detection experiments, participants simultaneously engaged in a movement task, in which they executed a back-bending movement, and a perceptual task, consisting of the detection of subtle tactile stimuli administered to their upper or lower back. The focus of participants' attention was manipulated by raising the probability that one of the back locations would be stimulated. The results revealed that tactile detection was suppressed during the execution of the back movements. Furthermore, the results of Experiment 2 revealed that when the stimulus was always presented to the attended location, tactile suppression was substantially reduced, suggesting that sensory suppression can be modulated by top-down attentional processes. The potential of this paradigm for studying tactile information processing in clinical populations is discussed. Copyright © 2013 Elsevier Inc. All rights reserved.

  19. The self-reported seat discomfort survey on economy class aircraft passenger in the Netherlands

    NARCIS (Netherlands)

    Tan, C.F.; Chen, W.; Rauterberg, G.W.M.; Said, M.R.

    2013-01-01

    The economy class aircraft passengers who experience long hour sitting during air travel has experienced significant body discomfort at neck, shoulder, lower back, upper leg and lower leg. The questionnaire was set out to study the relationship between different body back part discomfort and travel

  20. A study on the piston ring wear in automotive engine Seat 1500 CA by means of radioactive tracer technique; Estudio del desgaste de segmentos en motor Seat 1500 CA mediante trazadores radiactivos

    Energy Technology Data Exchange (ETDEWEB)

    Val Cob, M del; Chul, Y; Fuentes Figuera de Vargas, J.

    1971-07-01

    The iron side wear in the chromium-plated top compression ring has been a matter of interest for the engine makers and it has been required by them to investigate the wear characteristics of the chromium-plated piston ring. Meanwhile, Bureau of Nuclear Energy in Spain (Junta de Energia Nuclear) and Seat Car Manufacturing Company (Sociedad Espanola de Automoviles de Turismo) agreed to study the wear characteristics of chromium-plated piston ring of type CA gasoline engine for Seat 1500 car by means of radioactive tracer technique. (Author) 9 refs.