WorldWideScience

Sample records for seal captive care

  1. Foraging-Based Enrichment Promotes More Varied Behaviour in Captive Australian Fur Seals (Arctocephalus pusillus doriferus)

    Science.gov (United States)

    Hocking, David P.; Salverson, Marcia; Evans, Alistair R.

    2015-01-01

    During wild foraging, Australian fur seals (Arctocephalus pusillus doriferus) encounter many different types of prey in a wide range of scenarios, yet in captive environments they are typically provided with a narrower range of opportunities to display their full repertoire of behaviours. This study aimed to quantitatively explore the effect of foraging-based enrichment on the behaviour and activity patterns displayed by two captive Australian fur seals at Melbourne Zoo, Australia. Food was presented as a scatter in open water, in a free-floating ball device, or in a static box device, with each treatment separated by control trials with no enrichment. Both subjects spent more time interacting with the ball and static box devices than the scatter feed. The total time spent pattern swimming was reduced in the enrichment treatments compared to the controls, while the time spent performing random swimming behaviours increased. There was also a significant increase in the total number of bouts of behaviour performed in all three enrichment treatments compared to controls. Each enrichment method also promoted a different suit of foraging behaviours. Hence, rather than choosing one method, the most effective way to increase the diversity of foraging behaviours, while also increasing variation in general activity patterns, is to provide seals with a wide range of foraging scenarios where food is encountered in different ways. PMID:25946412

  2. Captive elephants - an overview

    Directory of Open Access Journals (Sweden)

    H.S. Riddle

    2011-06-01

    Full Text Available Currently a significant portion of the world’s elephant population is in captivity, mainly in Asia. Elephants have a long history of captivity in both Africa and Asia, and have adapted to many environments. Today, due to evolving needs and philosophies, some changes have occurred in the use of captive elephants, and debate about their welfare and management is increasing. To address this, several countries are developing higher standards of care via policies and guidelines; unfortunately most elephant range countries do not have a national strategy concerning their captive elephant population. Challenges in elephant medicine are always present, yet there is a lack of standardized requirements for veterinary care in elephant range countries, and the ability of veterinarians to treat elephant diseases is often limited. In recent years, much has been learned about elephant physiology, biology, and communication from captive elephants, and this knowledge supports management decisions affecting both captive and wild populations. Captive elephants present important educational and fundraising opportunities in support of conservation, but these are often not fully leveraged. Future considerations include implementing changes to improve staff support and training, establishing comprehensive registration of all captive populations, and ensuring that captive management does not negatively impact wild elephant populations.

  3. Detection of canine distemper virus serum neutralizing antibodies in captive U.S. phocids.

    Science.gov (United States)

    Clancy, Meredith M; Gamble, Kathryn C; Travis, Dominic A

    2013-03-01

    Antibodies to morbilliviruses have been documented in free-ranging pinnipeds throughout populations in the Atlantic and Arctic Oceans, but not from the Pacific Ocean. As a symbolic geographic barrier between the exposed Atlantic and naive Pacific populations, the captive phocid population in North America had undocumented serologic status. In this study, canine distemper virus (CDV) serum neutralization assays were used to assess the prevalence of antibodies in this population with participation of 25 U.S. institutions from grey seals (Halichoerus grypus, n = 6) and harbor seals (Phoca vitulina, n = 108). Historic and environmental risk factors associated with the epidemiology of distemper virus were collected by survey. Based on antibodies to canine distemper virus, the prevalence of exposure in this population was 25.5%, with 28 seals (grey, n = 2; harbor, n = 26) demonstrating antibody titers > or = 1:16, and positive titers ranged from 1:4 to 1:1,536. By survey analysis, strong associations with seropositive status were identified for captive origin (P = 0.013) and movement among institutions (P = 0.024). Size of population has positive correlation with likelihood of seropositive seals at an institution (P = 0.020). However, no major husbandry or enclosure-based risk factors were identified in institutions with seropositive seals, and no interaction between individual or institutional risk factors was identified. Previously undocumented prior to this study, CDV antibodies were measured in harbor seals (n = 2) recently stranded from the Pacific coast.

  4. Thoracic auscultation in captive bottlenose dolphins (Tursiops truncatus), California sea lions (Zalophus californianus), and South African fur seals (Arctocephalus pusillus) with an electronic stethoscope.

    Science.gov (United States)

    Scharpegge, Julia; Hartmann, Manuel García; Eulenberger, Klaus

    2012-06-01

    Thoracic auscultation is an important diagnostic method used in cases of suspected pulmonary disease in many species, as respiratory sounds contain significant information on the physiology and pathology of the lungs and upper airways. Respiratory diseases are frequent in marine mammals and are often listed as one of their main causes of death. The aim of this study was to investigate and report baseline parameters for the electronic-mediated thoracic auscultation of one cetacean species and two pinniped species in captivity. Respiratory sounds from 20 captive bottlenose dolphins (Tursiops truncatus), 6 California sea lions (Zalophus californianus), and 5 South African fur seals (Arctocephalus pusillus) were recorded with an electronic stethoscope. The sounds were analyzed for duration of the respiratory cycle, adventitious sounds, and peak frequencies of recorded sounds during expiration and inspiration as well as for sound intensity as reflected by waveform amplitude during the respiratory cycle. In respiratory cycles of the bottlenose dolphins' expiring "on command," the duration of the expiration was significantly shorter than the duration of the inspiration. In the examined pinnipeds of this study, there was no clear pattern concerning the duration of one breathing phase: Adventitious sounds were detected most often in bottlenose dolphins that were expiring on command and could be compared with "forced expiratory wheezes" in humans. This is the first report of forced expiratory wheezes in bottlenose dolphins; they can easily be misinterpreted as pathologic respiratory sounds. The peak frequencies of the respiratory sounds reached over 2,000 Hz in bottlenose dolphins and over 1,000 Hz in California sea lions and South African fur seals, but the variation of the frequency spectra was very high in all animals. To the authors' knowledge, this is the first systematic analysis of respiratory sounds of bottlenose dolphins and two species of pinnipeds.

  5. Conjunctival flora of healthy and diseased eyes of grey seals (Halichoerus grypus): implications for treatment.

    Science.gov (United States)

    Fleming, M; Bexton, S

    2016-07-23

    Ocular pathology is relatively common in stranded seals admitted to wildlife rehabilitation hospitals. Some have pre-existing problems, while others develop eye problems in captivity, and in particular ulcerative keratitis, due to factors such as large prominent eyes, suboptimal water quality, trauma and infighting. Despite treatment, corneal ulcerations can rapidly progress to 'melting' ulcers with subsequent rupture of the globe. In this case series, 32 grey seals (Halichoerus grypus) had conjunctival swabs taken on admission to a UK wildlife hospital to identify ocular bacterial flora and nine had subsequent swabs taken after four weeks to see if this changed in captivity. Additionally, nine seals with ocular pathology were also swabbed. Although a wide range of bacteria were cultured on admission, the most common isolates were Gemella haemolysans, Escherichia coli and Clostridium perfringens All 'melting' ulcers were associated with Pseudomonas aeruginosa, which suggests this bacterial species may be significant in the pathogenesis of progressive stromal ulceration in grey seals. British Veterinary Association.

  6. Clawed forelimbs allow northern seals to eat like their ancient ancestors

    Science.gov (United States)

    Hocking, David P.; Marx, Felix G.; Sattler, Renae; Harris, Robert N.; Pollock, Tahlia I.; Sorrell, Karina J.; Fitzgerald, Erich M. G.; McCurry, Matthew R.; Evans, Alistair R.

    2018-04-01

    Streamlined flippers are often considered the defining feature of seals and sea lions, whose very name `pinniped' comes from the Latin pinna and pedis, meaning `fin-footed'. Yet not all pinniped limbs are alike. Whereas otariids (fur seals and sea lions) possess stiff streamlined forelimb flippers, phocine seals (northern true seals) have retained a webbed yet mobile paw bearing sharp claws. Here, we show that captive and wild phocines routinely use these claws to secure prey during processing, enabling seals to tear large fish by stretching them between their teeth and forelimbs. `Hold and tear' processing relies on the primitive forelimb anatomy displayed by phocines, which is also found in the early fossil pinniped Enaliarctos. Phocine forelimb anatomy and behaviour therefore provide a glimpse into how the earliest seals likely fed, and indicate what behaviours may have assisted pinnipeds along their journey from terrestrial to aquatic feeding.

  7. Study on reproduction of captive marine mammals.

    Science.gov (United States)

    Katsumata, Etsuko

    2010-02-01

    The reproductive endocrinological characteristics of beluga, killer whale, spotted seal and bottlenose dolphin were evaluated and used in conjunction with applied reproductive research to enhance captive breeding programs. Results from 8 y of biweekly serum progesterone determination in a female beluga indicated that sexual maturity occured at approximately age 13, two to seven estrous cycles, lasting 37 +/- 3.9 days, per yr began in April-May every year. Rectal temperature was positively correlated with serum progesterone levels and negatively associated with behavioral estrus. In five cases of pregnancy of two female killer whale, positive relationship was found between serum progesterone concentration and temperature during the first period of 18 month-gestation. In the normal parturitions (n=4), rectal temperature decreased 0.8 C lower than average rectal temperature during pregnancy. Sexual maturity of female killer whales occurred at age nine. Yearly contraception in the mono-estrus captive spotted seals (n=10) using a single dose of the progestagen (proligestone(TM); 5 or 10 mg/kg s.c.) was achieved in 94% (33/35) of the attempts over 5 yr when the hormone was administered two months prior to the breeding season. Artificial insemination trials (n=4) were conducted in female bottlenose dolphin (n=3) using fresh and frozen-thawed semen. Estrus synchronization using regumate (27 days) resulted in ovulation occurring 19 to 24 days post withdrawal. Conception was confirmed in 75% of the attempts, with two females successfully delivering calves.

  8. Update on common nutritional disorders of captive reptiles.

    Science.gov (United States)

    Mans, Christoph; Braun, Jana

    2014-09-01

    Nutritional disorders of captive reptiles remain very common despite the increasing knowledge about reptile husbandry and nutrition. Many nutritional disorders are diagnosed late in the disease process; often secondary complications, such as pathologic fractures in reptiles suffering from nutritional secondary hyperparathyroidism have occurred. Therefore, every attempt should be made to educate reptile owners and keepers about the proper care and dietary needs of reptiles under their care because all nutritional disorders seen in captive reptiles are preventable. Copyright © 2014 Elsevier Inc. All rights reserved.

  9. Blood metal levels and metal-influenced immune functions of harbour seals in captivity

    International Nuclear Information System (INIS)

    Kakuschke, Antje; Valentine-Thon, Elizabeth; Griesel, Simone; Rosenberger, Tanja; Mundry, Roger; Siebert, Ursula; Prange, Andreas

    2008-01-01

    Immunological blood parameters and the effects of environmental pollutants on the immune system are important to assess the health status of seals. Animals living permanently in seal centres are useful for development and validation of diagnostic tools for free-ranging animals. In this study, parameters of cellular immunity as well as metal concentrations in blood and metal influence on cell proliferation of seven seals from a seal centre were investigated repeatedly using multi-element analysis and a lymphocyte proliferation assay. The metal concentrations, except for tin and chromium, were in general comparable to those of free-ranging animals of the North Sea. The unstimulated and mitogen-stimulated lymphocyte proliferation showed strong intra- and inter-individual variability, which reflected variability in activation of the immune status. Furthermore, both immunosuppressive and stimulative influences of metals on lymphocytes were found. Summarising, the methods used in this investigation provided useful information on these animals, and their application to free-ranging animals can be recommended

  10. Blood metal levels and metal-influenced immune functions of harbour seals in captivity

    Energy Technology Data Exchange (ETDEWEB)

    Kakuschke, Antje [GKSS Research Centre, Institute for Coastal Research, Max-Planck-Strasse 1, 21502 Geesthacht (Germany)], E-mail: antje.kakuschke@gkss.de; Valentine-Thon, Elizabeth [Department of Immunology, Laboratory Center Bremen, Friedrich-Karl-Strasse 22, 28205 Bremen (Germany); Griesel, Simone [GKSS Research Centre, Institute for Coastal Research, Max-Planck-Strasse 1, 21502 Geesthacht (Germany); Rosenberger, Tanja [Seal Centre Friedrichskoog e.V., 25718 Friedrichskoog (Germany); Mundry, Roger [Research and Technology Centre Westcoast (FTZ), University of Kiel, Hafentoern 1, 25761 Buesum (Germany); Max Planck Institute for Evolutionary Anthropology, Deutscher Platz 6, 04103 Leipzig (Germany); Siebert, Ursula [Research and Technology Centre Westcoast (FTZ), University of Kiel, Hafentoern 1, 25761 Buesum (Germany); Prange, Andreas [GKSS Research Centre, Institute for Coastal Research, Max-Planck-Strasse 1, 21502 Geesthacht (Germany)

    2008-04-15

    Immunological blood parameters and the effects of environmental pollutants on the immune system are important to assess the health status of seals. Animals living permanently in seal centres are useful for development and validation of diagnostic tools for free-ranging animals. In this study, parameters of cellular immunity as well as metal concentrations in blood and metal influence on cell proliferation of seven seals from a seal centre were investigated repeatedly using multi-element analysis and a lymphocyte proliferation assay. The metal concentrations, except for tin and chromium, were in general comparable to those of free-ranging animals of the North Sea. The unstimulated and mitogen-stimulated lymphocyte proliferation showed strong intra- and inter-individual variability, which reflected variability in activation of the immune status. Furthermore, both immunosuppressive and stimulative influences of metals on lymphocytes were found. Summarising, the methods used in this investigation provided useful information on these animals, and their application to free-ranging animals can be recommended.

  11. Mineral elements and essential trace elements in blood of seals of the North Sea measured by total-reflection X-ray fluorescence analysis

    International Nuclear Information System (INIS)

    Griesel, S.; Mundry, R.; Kakuschke, A.; Fonfara, S.; Siebert, U.; Prange, A.

    2006-01-01

    Mineral and essential trace elements are involved in numerous physiological processes in mammals. Often, diseases are associated with an imbalance of the electrolyte homeostasis. In this study, the concentrations of mineral elements (P, S, K, Ca) and essential trace elements (Fe, Cu, Zn, Se, Rb, Sr) in whole blood of harbor seals (Phoca vitulina) were determined using total-reflection X-ray fluorescence spectrometry (TXRF). Samples from 81 free-ranging harbor seals from the North Sea and two captive seals were collected during 2003-2005. Reference ranges and element correlations for health status determination were derived for P, S, K, Ca, Fe, Cu, and Zn level in whole blood. Grouping the seals by age, gender and sample location the concentration levels of the elements were compared. The blood from two captive seals with signs of diseases and four free-ranging seals showed reduced element levels of P, S, and Ca and differences in element correlation of electrolytes were ascertained. Thus, simultaneous measurements of several elements in only 500 μL volumes of whole blood provide the possibility to obtain information on both, the electrolyte balance and the hydration status of the seals. The method could therefore serve as an additional biomonitoring tool for the health assessment

  12. Variability of Hormonal Stress Markers and Stress Responses in a Large Cross-Sectional Sample of Elephant Seals

    Science.gov (United States)

    2015-09-30

    regulation in a captive dolphin population PI: Cory Champagne This project examines roles of CBG and rT3 in the sister study on the Navy captive...bottlenose dolphin population. Molecular indicators of chronic stress in a model pinniped - the northern elephant seal. PI: Cory Champagne This...Khudyakov J.I., C.D. Champagne , L. Preeyanon, R.M. Ortiz, D.E. Crocker. 2015. Muscle transcriptome response to ACTH administration in a free-ranging

  13. Use of the North Sea by harbour seal with special emphasis on the Horns Reef area. Test of prototype GPS/GSM-transmitter on harbour seals in the Sealarium Esbjerg

    International Nuclear Information System (INIS)

    Tougaard, S.; Tougaard, J.

    2004-04-01

    A combined GPS-receiver and GSM mobile phone transmitter designed for deployment on wild seals was tested on a captive harbour seal. The unit has been under development in recent years and consists of a GPS-unit for positioning and a GSM mobile phone unit for transmission of logged positions to land. The test took place in the Sealarium at the Fisheries and Maritime Museum, Esbjerg. The unit was glued onto the fur on the head of the seal, where it stayed on for 13 days. Only one position was acquired by the unit and it failed to connect to the GSM-net during the test. Technical information from the constructor of the unit is not available and it is thus not possible to conclude on the reasons why the unit did not function as intended. The behaviour of the seal can however, be ruled out, as close observation and registration of the seals dive behaviour during the first days of deployment showed that the unit was free of the water for sufficiently long periods for positions to be acquired. (au)

  14. Use of the North Sea by harbour seal with special emphasis on the Horns Reef area. Test of prototype GPS/GSM-transmitter on harbour seals in the Sealarium Esbjerg[Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Tougaard, S.; Tougaard, J.

    2004-04-15

    A combined GPS-receiver and GSM mobile phone transmitter designed for deployment on wild seals was tested on a captive harbour seal. The unit has been under development in recent years and consists of a GPS-unit for positioning and a GSM mobile phone unit for transmission of logged positions to land. The test took place in the Sealarium at the Fisheries and Maritime Museum, Esbjerg. The unit was glued onto the fur on the head of the seal, where it stayed on for 13 days. Only one position was acquired by the unit and it failed to connect to the GSM-net during the test. Technical information from the constructor of the unit is not available and it is thus not possible to conclude on the reasons why the unit did not function as intended. The behaviour of the seal can however, be ruled out, as close observation and registration of the seals dive behaviour during the first days of deployment showed that the unit was free of the water for sufficiently long periods for positions to be acquired. (au)

  15. Keeping and breeding the rescued Sunda pangolins (Manis javanica) in captivity.

    Science.gov (United States)

    Zhang, Fuhua; Yu, Jiaming; Wu, Shibao; Li, Shaoshan; Zou, Cuiyun; Wang, Qiaoyun; Sun, Ruyong

    2017-12-01

    The Sunda pangolin (Manis javanica Desmarest, 1822) is a Critically Endangered species. Given that this species lacks effective policies for in situ conservation and prevention of poaching in the wild, ex situ conservation and a captive breeding program are urgently needed to save this species from extinction. However, techniques for the maintenance and captive breeding of pangolins have not been well developed. In June 2010, we established the Pangolin Research Base for Artificial Rescue and Conservation Breeding of South China Normal University (PRB-SCNU). To date, a total of 34 Sunda pangolin cubs have been born at PRB-SCNU, 26 of which were captive bred, indicating great progress in keeping and breeding the Sunda pangolin. The techniques for maintenance-including housing, transitioning to an artificial diet, husbandry, and captive breeding-are described in this paper. The purpose of this manuscript is to share our successful experiences and techniques in the maintenance, management, and captive breeding of Sunda pangolins, and to provide guidance and a reference for the captive care and management of Sunda pangolins and other pangolin species. © 2017 Wiley Periodicals, Inc.

  16. Day care PNL using 'Santosh-PGI hemostatic seal' versus standard PNL: A randomized controlled study.

    Science.gov (United States)

    Kumar, Santosh; Singh, Shivanshu; Singh, Prashant; Singh, Shrawan Kumar

    2016-01-01

    To compare the outcomes of tubeless day care PNL using hemostatic seal in the access tract versus standard PNL. It was a prospective randomized controlled study. Cases were randomized to either the day care group with hemostatic seal (DCS) or the control group where patients were admitted and a nephrostomy tube was placed at the conclusion of surgery. A total of 180 cases were screened and out of these, 113 were included in the final analysis. The stone clearance rates were comparable in both the groups. The mean drop in hemoglobin was significantly lower in DCS group than the control group (1.05 ±0.68 vs. 1.30 ±0.58 gm/dl, p = 0.038).Mean postoperative pain score, analgesic requirement (paracetamol) and duration of hospital stay were also significantly lower in the DCS group (3.79 ±1.23 vs. 6.12 ±0.96, 1.48 ±0.50 vs. 4.09 ±1.11 grams and 0.48 ±0.26 vs. 4.74 ±1.53 days respectively; p PNL with composite hemostatic tract seal is considered safe. It resulted in a significant reduction of blood loss and analgesic requirement with significantly reduced hospital stay, nephrostomy tube site morbidity and time required to resume normal activity when compared to the standard PNL. However, patients must be compliant with the given instructions and should have access to a health care facility, as few of them may need re-admission.

  17. Seals and sea lions are what they eat, plus what? Determination of trophic discrimination factors for seven pinniped species.

    Science.gov (United States)

    Beltran, Roxanne S; Peterson, Sarah H; McHuron, Elizabeth A; Reichmuth, Colleen; Hückstädt, Luis A; Costa, Daniel P

    2016-05-15

    Mixing models are a common method for quantifying the contribution of prey sources to the diet of an individual using stable isotope analysis; however, these models rely upon a known trophic discrimination factor (hereafter, TDF) that results from fractionation between prey and animal tissues. Quantifying TDFs in captive animals is ideal, because diet is controlled and the proportional contributions and isotopic values of all prey items are known. To calculate TDFs for the Hawaiian monk seal, northern elephant seal, bearded seal, ringed seal, spotted seal, harbor seal, and California sea lion, we obtained whiskers, serum, plasma, red blood cells, and prey items from nine captive individuals. We obtained δ(13) C and δ(15) N values using continuous-flow isotope-ratio mass spectrometry. The average δ(13) C and δ(15) N values from bulk and lipid-corrected prey from the diet were subtracted from the δ(13) C and δ(15) N values of each blood and whisker sample to calculate tissue-specific TDFs for each individual (∆(13) C or ∆(15) N). The ∆(13) C values ranged from +1.7 to +3.2‰ (bulk prey) and from +0.8 to +1.9‰ (lipid-corrected prey) for the various blood components, and from +3.9 to +4.6‰ (bulk prey) or +2.6 to +3.9‰ (lipid-corrected prey) for whiskers. The ∆(15) N values ranged from +2.2 to +4.3‰ for blood components and from +2.6 to +4.0‰ for whiskers. The TDFs tended to group by tissue, with whiskers having greater ∆(13) C values than blood components. In contrast, the ∆(15) N values were greater in serum and plasma than in red blood cells and whiskers. By providing the first TDF values for five seal species (family Phocidae) and one otariid species (family Otariidae), our study facilitates more accurate mixing models for these species. These values are particularly important for critically endangered Hawaiian monk seals and the three Arctic seal species (bearded, ringed, and spotted) that are faced with a rapidly changing environment

  18. Seals and sealing handbook

    CERN Document Server

    Flitney, Robert K

    2014-01-01

    Seals and Sealing Handbook, 6th Edition provides comprehensive coverage of sealing technology, bringing together information on all aspects of this area to enable you to make the right sealing choice. This includes detailed coverage on the seals applicable to static, rotary and reciprocating applications, the best materials to use in your sealing systems, and the legislature and regulations that may impact your sealing choices. Updated in line with current trends this updated reference provides the theory necessary for you to select the most appropriate seals for the job and with its 'Failur

  19. National Accreditation and Its Role in Early Education: An Analysis of Florida's Gold Seal Quality Child-Care Program and Licensing Standards

    Science.gov (United States)

    Winterbottom, Christian; Jones, Ithel

    2014-01-01

    This article reports on the first Florida statewide assessment of the Gold Seal Quality Care program, accreditation, and the relationship with licensing violations. This study analyzed the differences between the Department of Children and Families Gold Seal-Accredited facilities and nonaccredited facilities by comparing the facilities and the…

  20. Female harbor seal (Phoca vitulina) behavioral response to playbacks of underwater male acoustic advertisement displays.

    Science.gov (United States)

    Matthews, Leanna P; Blades, Brittany; Parks, Susan E

    2018-01-01

    During the breeding season, male harbor seals ( Phoca vitulina ) make underwater acoustic displays using vocalizations known as roars. These roars have been shown to function in territory establishment in some breeding areas and have been hypothesized to be important for female choice, but the function of these sounds remains unresolved. This study consisted of a series of playback experiments in which captive female harbor seals were exposed to recordings of male roars to determine if females respond to recordings of male vocalizations and whether or not they respond differently to roars from categories with different acoustic characteristics. The categories included roars with characteristics of dominant males (longest duration, lowest frequency), subordinate males (shortest duration, highest frequency), combinations of call parameters from dominant and subordinate males (long duration, high frequency and short duration, low frequency), and control playbacks of water noise and water noise with tonal signals in the same frequency range as male signals. Results indicate that overall females have a significantly higher level of response to playbacks that imitate male vocalizations when compared to control playbacks of water noise. Specifically, there was a higher level of response to playbacks representing dominant male vocalization when compared to the control playbacks. For most individuals, there was a greater response to playbacks representing dominant male vocalizations compared to playbacks representing subordinate male vocalizations; however, there was no statistical difference between those two playback types. Additionally, there was no difference between the playbacks of call parameter combinations and the controls. Investigating female preference for male harbor seal vocalizations is a critical step in understanding the harbor seal mating system and further studies expanding on this captive study will help shed light on this important issue.

  1. Non-invasive assessment of reproductive status and stress in captive Asian elephants in three south Indian zoos.

    Science.gov (United States)

    Kumar, Vinod; Palugulla Reddy, Vivekananda; Kokkiligadda, Adiseshu; Shivaji, Sisinthy; Umapathy, Govindhaswamy

    2014-05-15

    Asian elephants in captivity need immediate attention to be bred so as to meet the increasing demand for captive elephants and to overcome the dependence on supplementing the captive stock with wild animals. Unfortunately, captive breeding programs across the globe have met with limited success and therefore more effort is needed to improve breeding in captivity. Endocrine profiling of reproductive hormones (progestagens and androgens) and the stress hormone (glucocorticoids) could facilitate better management and breeding strategies. In the present study, we investigated reproductive and stress physiology of 12 captive Asian elephants for 10-27 months using a non-invasive method based on steroid analysis of 1700 elephant dung samples. Most of the elephants were cycling regularly. Males during musth showed increased fecal androgen metabolite concentrations and exhibited a slight increase in fecal glucocorticoid metabolite levels. Elephants used in public festivals and processions showed significantly increased in faecal glucocorticoid metabolite levels. The results indicate that captive elephants require periodic health care, better husbandry practices and scientific management for sustainable captive population. Copyright © 2014 Elsevier Inc. All rights reserved.

  2. Selection of vacuum seals for EBT-P

    International Nuclear Information System (INIS)

    Dillow, C.F.; Adlon, G.L.; Stubblefield, V.E.

    1981-01-01

    Elmo Bumpy Torus Proof of Principle (EBT-P) is a magnetic fusion RandD facility being constructed by McDonnell Douglas Astronautics Company - St. Louis Division of Oak Ridge National Laboratory (ORNL). EBT-P is a truly unique fusion device requiring careful consideration in selecting both the primary vacuum seals on the toroidal vessel and the secondary vacuum seals in components such as vacuum pumps and and valves. The vacuum seal environment is described and the considerations in vacuum seal selection fully discussed. Methods for protecting vacuum seals in pumps and valves from the microwave environments are also presented

  3. Robotic Seals as Therapeutic Tools in an Aged Care Facility: A Qualitative Study

    Directory of Open Access Journals (Sweden)

    Melanie Birks

    2016-01-01

    Full Text Available Robots, including robotic seals, have been used as an alternative to therapies such as animal assisted therapy in the promotion of health and social wellbeing of older people in aged care facilities. There is limited research available that evaluates the effectiveness of robot therapies in these settings. The aim of this study was to identify, explore, and describe the impact of the use of Paro robotic seals in an aged care facility in a regional Australian city. A qualitative, descriptive, exploratory design was employed. Data were gathered through interviews with the three recreational therapists employed at the facility who were also asked to maintain logs of their interactions with the Paro and residents. Data were transcribed and thematically analysed. Three major themes were identified from the analyses of these data: “a therapeutic tool that’s not for everybody,” “every interaction is powerful,” and “keeping the momentum.” Findings support the use of Paro as a therapeutic tool, revealing improvement in emotional state, reduction of challenging behaviours, and improvement in social interactions of residents. The potential benefits justify the investment in Paro, with clear evidence that these tools can have a positive impact that warrants further exploration.

  4. Seals, Concrete Anchors, and Connections

    Science.gov (United States)

    1989-02-01

    caulking compounds, nonhardening extruded tapes, nonhardening mastics, strippable spray coatings, pressure sensitive tapes, gaskets, adhesives, fabrics...films, etc. Although all of these materials may provide a seal, care must be taken when selecting a sealing material as to its chemical and...gaskets have performed satisfactorily. Another factor to be considered in the selection of gasketing material is its compatibility with both the

  5. Self-hypnosis training and captivity survival.

    Science.gov (United States)

    Wood, D P; Sexton, J L

    1997-01-01

    In February and March, 1973, 566 U.S. military prisoners (POWs) were released from North Vietnam. These men had been POWs for a period of time between 2 months and 9 years, with a mean incarceration of 4.44 years. They had faced physical and psychological stress similar to that experienced by POWs from previous wars: starvation, disease, inadequate shelter, lack of medical care, interrogations and torture (Deaton, Burge, Richlin & Latrownik, 1977; Mitchell, 1991). By definition, such prison conditions constituted a traumatic experience (Deaton et al., 1977). However, a unique stress for our POWs in North Vietnam was the additional trauma of solitary confinement. This paper reviews the coping and "time killing" activities of U.S. Navy Vietnam POWs who experienced solitary confinement and tortuous interrogation. This paper also reports the physical and psychological adjustment of our POWs following their release from captivity. Suggestions are made regarding the revision of the curriculum for captivity survival training programs such as Survival, Evasion, Resistance, and Escape (SERE) school.

  6. An investigation into onshore captive insurance companies

    Directory of Open Access Journals (Sweden)

    ME Le Roux

    2015-01-01

    Full Text Available Insurance provided by captive insurers is one of various forms of risk financing.  The nature and main types of captive insurance companies are discussed.  This is followed by the results of an empirical study that focused on South African onshore captive insurance companies.  The objectives in establishing and operating a captive insurer, the factors which determine the decision of the parent company to establish and operate a captive insurer and the future and usefulness of insurance provided by captive insurers are some of the aspects that are addressed.

  7. What role does heritability play in transgenerational phenotypic responses to captivity? Implications for managing captive populations.

    Science.gov (United States)

    Courtney Jones, Stephanie K; Byrne, Phillip G

    2017-12-01

    Animals maintained in captivity exhibit rapid changes in phenotypic traits, which may be maladaptive for natural environments. The phenotype can shift away from the wild phenotype via transgenerational effects, with the environment experienced by parents influencing the phenotype and fitness of offspring. There is emerging evidence that controlling transgenerational effects could help mitigate the effects of captivity, improving the success of captively bred animals post release. However, controlling transgenerational effects requires knowledge of the mechanisms driving transgenerational changes. To better understand the genetic mechanisms that contribute to transgenerational effects in captivity we investigated the heritability of behavioral phenotypes using mid parent- and single parent-offspring regressions in a population of captive-reared house mouse (Mus musculus) that we had previously shown exhibit transgenerational changes in boldness and activity behavioral types. Slopes for boldness and activity were all positive, indicating a low to moderate degree of heritability. Though, none of the heritability estimates were statistically significant due to the large surrounding errors. However, the large error surrounding the heritability estimates may also indicate that there is variability in heritability between behavioral traits within the boldness and activity behavioral types. The implication of this finding is that the potential for heritable genetic changes in captivity varies considerably between traits. We conclude that continued investigation of the potential for traits to evolve in captivity is needed to better inform captive breeding and reintroduction programs. © 2017 Wiley Periodicals, Inc.

  8. Tooth damage in captive orcas (Orcinus orca).

    Science.gov (United States)

    Jett, John; Visser, Ingrid N; Ventre, Jeffrey; Waltz, Jordan; Loch, Carolina

    2017-12-01

    Tooth damage as a result of oral stereotypies is evident in captive orca, yet little research on the topic exists. This study examines the associations between dental pathology, sex, facility, duration of captivity and other factors in captive orca. We evaluated mandibular and maxillary teeth from dental images of 29 captive orca owned by a US-based theme park. Each tooth was scored for coronal wear, wear at or below gum line and bore holes. Fractured and missing teeth were also noted. Summary statistics described the distribution and severity of pathologies; inferential statistics examined how pathologies differed between sexes, between wild-captured and captive-born orcas and between captive orca at four facilities. We also evaluated how dental pathology and duration of captivity were related. Approximately 24% of whales exhibited "major" to "extreme" mandibular coronal tooth wear, with coronal wear and wear at or below gum line highly correlated. More than 60% of mandibular teeth 2 and 3 exhibited fractures. Bore holes were observed primarily among anterior mandibular teeth, with more than 61% of teeth 2 and 3 bearing evidence of having been drilled. Four of five orca with the highest age-adjusted tooth pathology indices were captive-born. Various dental pathologies were observed across all whales, with pathologies beginning at a young age. Oral stereotypies exhibited by captive orca contributed to the observed dental damage. By making dental and health records of captive whales publicly available, the theme park industry is uniquely positioned to provide further insight into dental pathology and resultant health consequences in captive orca. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Sealing of boreholes using natural, compatible materials: Granular salt

    International Nuclear Information System (INIS)

    Finley, R.E.; Zeuch, D.H.; Stormont, J.C.; Daemen, J.J.K.

    1994-01-01

    Granular salt can be used to construct high performance permanent seals in boreholes which penetrate rock salt formations. These seals are described as seal systems comprised of the host rock, the seal material, and the seal rock interface. The performance of these seal systems is defined by the complex interactions between these seal system components through time. The interactions are largely driven by the creep of the host formation applying boundary stress on the seal forcing host rock permeability with time. The immediate permeability of these seals is dependent on the emplaced density. Laboratory test results suggest that careful emplacement techniques could results in immediate seal system permeability on the order of 10 -16 m 2 to 10 -18 m 2 (10 -4 darcy to 10 -6 ). The visco-plastic behavior of the host rock coupled with the granular salts ability to ''heal'' or consolidate make granular salt an ideal sealing material for boreholes whose permanent sealing is required

  10. 46 CFR 59.10-30 - Seal welding.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Seal welding. 59.10-30 Section 59.10-30 Shipping COAST... VESSELS AND APPURTENANCES Welding Repairs to Boilers and Pressure Vessels in -Service § 59.10-30 Seal welding. Where leaks occur in riveted joints or connections, they shall be carefully investigated to...

  11. Efficacy of fenbendazole and levamisole treatments in captive Houston toads (Bufo [Anaxyrus] houstonensis).

    Science.gov (United States)

    Bianchi, Catherine M; Johnson, Cassidy B; Howard, Lauren L; Crump, Paul

    2014-09-01

    Effective disease monitoring and prevention is critical to the success of captive amphibian care. Nematodes, including the genera Rhabdias and Strongyloides, are known to contribute to mortality in captive amphibians and have been identified in the Houston Zoo's endangered Houston toad (Bufo [Anaxyrus] houstonensis) captive assurance colony. Five years of fecal data for the toad colony were compiled and analyzed in order to investigate the efficacy of two anthelminthic medications, fenbendazole (FBZ) and levamisole (LMS), which were used to control nematode infections. Both FBZ (dusted onto food items) and topical LMS (6.5 to 13.5 mg/kg) significantly reduced the number of nematode eggs, larvae, and adults observed by fecal parasitologic examination. There were no significant differences between treatments, and egg reappearance periods were difficult to compare as a result of low sample size. No adverse effects from either anthelminthic treatment were observed. Both topical LMS and oral FBZ appear to be safe and efficacious treatments for the reduction of the internal nematode burden in captive Houston toads.

  12. Absorption of decabromodiphenyl ether and other organohalogen chemicals by grey seals (Halichoerus grypus)

    International Nuclear Information System (INIS)

    Thomas, Gareth O.; Moss, Simon E.W.; Asplund, Lillemor; Hall, Ailsa J.

    2005-01-01

    An input-output balance study was performed for polybrominated diphenyl ethers, polychlorinated biphenyls and some organochlorine pesticides on three captive, juvenile grey seals (Halichoerus grypus). The animals were fed a diet of herring for six months, during the last three months of which this study was performed. A supplement of decabromodiphenyl ether was included in the diet during the second month of the study. Consistently high absorption (>89%) was observed for all of the chemicals studied, whereas work on other animals has generally shown high (>80%) net absorption at log K OW OW , and very low absorption of decabromodiphenyl ether. The half-life of decabromodiphenyl ether in blood was estimated to be between 8.5 and 13 days. Measurable concentrations of decabromodiphenyl ether were detected in seal blubber at the end of the study, indicating that this chemical can be stored in adipose and may bioaccumulate. Current understanding of the mechanism of absorption of organohalogen chemicals and the potential for accumulation of decabromodiphenyl ether will need reassessing in the light of these results. - Decabromodiphenyl ether is absorbed effectively from the diet by grey seals, and can be stored in the blubber even after exposure ceases

  13. Shuttle Primary Reaction Control Subsystem Thruster Fuel Valve Pilot Seal Extrusion: A Failure Correlation

    Science.gov (United States)

    Waller, Jess; Saulsberry, Regor L.

    2003-01-01

    Pilot operated valves (POVs) are used to control the flow of hypergolic propellants monomethylhydrazine (fuel) and nitrogen tetroxide (oxidizer) to the Shuttle orbiter Primary Reaction Control Subsystem (PRCS) thrusters. The POV incorporates a two-stage design: a solenoid-actuated pilot stage, which in turn controls a pressure-actuated main stage. Isolation of propellant supply from the thruster chamber is accomplished in part by a captive polytetrafluoroethylene (PTFE) pilot seal retained inside a Custom 455.1 stainless steel cavity. Extrusion of the pilot seal restricts the flow of fuel around the pilot poppet, thus impeding or preventing the main valve stage from opening. It can also prevent the main stage from staying open with adequate force margin, particularly if there is gas in the main stage actuation cavity. During thruster operation on-orbit, fuel valve pilot seal extrusion is commonly indicated by low or erratic chamber pressure or failure of the thruster to fire upon command (Fail-Off). During ground turnaround, pilot seal extrusion is commonly indicated by slow gaseous nitrogen (GN2) main valve opening times (greater than 38 ms) or slow water main valve opening response times (greater than 33 ms). Poppet lift tests and visual inspection can also detect pilot seal extrusion during ground servicing; however, direct metrology on the pilot seat assembly provides the most quantitative and accurate means of identifying extrusion. Minimizing PRCS fuel valve pilot seal extrusion has become an important issue in the effort to improve PRCS reliability and reduce associated life cycle costs.

  14. Captivity humanizes the primate microbiome.

    Science.gov (United States)

    Clayton, Jonathan B; Vangay, Pajau; Huang, Hu; Ward, Tonya; Hillmann, Benjamin M; Al-Ghalith, Gabriel A; Travis, Dominic A; Long, Ha Thang; Tuan, Bui Van; Minh, Vo Van; Cabana, Francis; Nadler, Tilo; Toddes, Barbara; Murphy, Tami; Glander, Kenneth E; Johnson, Timothy J; Knights, Dan

    2016-09-13

    The primate gastrointestinal tract is home to trillions of bacteria, whose composition is associated with numerous metabolic, autoimmune, and infectious human diseases. Although there is increasing evidence that modern and Westernized societies are associated with dramatic loss of natural human gut microbiome diversity, the causes and consequences of such loss are challenging to study. Here we use nonhuman primates (NHPs) as a model system for studying the effects of emigration and lifestyle disruption on the human gut microbiome. Using 16S rRNA gene sequencing in two model NHP species, we show that although different primate species have distinctive signature microbiota in the wild, in captivity they lose their native microbes and become colonized with Prevotella and Bacteroides, the dominant genera in the modern human gut microbiome. We confirm that captive individuals from eight other NHP species in a different zoo show the same pattern of convergence, and that semicaptive primates housed in a sanctuary represent an intermediate microbiome state between wild and captive. Using deep shotgun sequencing, chemical dietary analysis, and chloroplast relative abundance, we show that decreasing dietary fiber and plant content are associated with the captive primate microbiome. Finally, in a meta-analysis including published human data, we show that captivity has a parallel effect on the NHP gut microbiome to that of Westernization in humans. These results demonstrate that captivity and lifestyle disruption cause primates to lose native microbiota and converge along an axis toward the modern human microbiome.

  15. Social grooming network in captive chimpanzees: does the wild or captive origin of group members affect sociality?

    Science.gov (United States)

    Levé, Marine; Sueur, Cédric; Petit, Odile; Matsuzawa, Tetsuro; Hirata, Satoshi

    2016-01-01

    Many chimpanzees throughout the world are housed in captivity, and there is an increasing effort to recreate social groups by mixing individuals with captive origins with those with wild origins. Captive origins may entail restricted rearing conditions during early infant life, including, for example, no maternal rearing and a limited social life. Early rearing conditions have been linked with differences in tool-use behavior between captive- and wild-born chimpanzees. If physical cognition can be impaired by non-natural rearing, what might be the consequences for social capacities? This study describes the results of network analysis based on grooming interactions in chimpanzees with wild and captive origins living in the Kumamoto Sanctuary in Kumamoto, Japan. Grooming is a complex social activity occupying up to 25% of chimpanzees' waking hours and plays a role in the emergence and maintenance of social relationships. We assessed whether the social centralities and roles of chimpanzees might be affected by their origin (captive vs wild). We found that captive- and wild-origin chimpanzees did not differ in their grooming behavior, but that theoretical removal of individuals from the network had differing impacts depending on the origin of the individual. Contrary to findings that non-natural early rearing has long-term effects on physical cognition, living in social groups seems to compensate for the negative effects of non-natural early rearing. Social network analysis (SNA) and, in particular, theoretical removal analysis, were able to highlight differences between individuals that would have been impossible to show using classical methods. The social environment of captive animals is important to their well-being, and we are only beginning to understand how SNA might help to enhance animal welfare.

  16. Seals and sealing handbook

    CERN Document Server

    Flitney, Robert K

    2007-01-01

    Wherever machinery operates there will be seals of some kind ensuring that the machine remains lubricated, the fluid being pumped does not leak, or the gas does not enter the atmosphere. Seals are ubiquitous, in industry, the home, transport and many other places. This 5th edition of a long-established title covers all types of seal by application: static, rotary, reciprocating etc. The book bears little resemblance to its predecessors, and Robert Flitney has re-planned and re-written every aspect of the subject. No engineer, designer or manufacturer of seals can afford to be without this uniq

  17. First Care Area Logs for captive loggerhead and Kemps ridley sea turtles 2003-2014

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The database contains records pertaining to sick captive sea turtles, their daily behavior, medications, food offered, food consumed, and water quality.

  18. Genetic composition of captive panda population.

    Science.gov (United States)

    Yang, Jiandong; Shen, Fujun; Hou, Rong; Da, Yang

    2016-10-03

    A major function of the captive panda population is to preserve the genetic diversity of wild panda populations in their natural habitats. Understanding the genetic composition of the captive panda population in terms of genetic contributions from the wild panda populations provides necessary knowledge for breeding plans to preserve the genetic diversity of the wild panda populations. The genetic contributions from different wild populations to the captive panda population were highly unbalanced, with Qionglai accounting for 52.2 % of the captive panda gene pool, followed by Minshan with 21.5 %, Qinling with 10.6 %, Liangshan with 8.2 %, and Xiaoxiangling with 3.6 %, whereas Daxiangling, which had similar population size as Xiaoxiangling, had no genetic representation in the captive population. The current breeding recommendations may increase the contribution of some small wild populations at the expense of decreasing the contributions of other small wild populations, i.e., increasing the Xiaoxiangling contribution while decreasing the contribution of Liangshan, or sharply increasing the Qinling contribution while decreasing the contributions of Xiaoxiangling and Liangshan, which were two of the three smallest wild populations and were already severely under-represented in the captive population. We developed three habitat-controlled breeding plans that could increase the genetic contributions from the smallest wild populations to 6.7-11.2 % for Xiaoxiangling, 11.5-12.3 % for Liangshan and 12.9-20.0 % for Qinling among the offspring of one breeding season while reducing the risk of hidden inbreeding due to related founders from the same habitat undetectable by pedigree data. The three smallest wild panda populations of Daxiangling, Xiaoxiangling and Liangshan either had no representation or were severely unrepresented in the current captive panda population. By incorporating the breeding goal of increasing the genetic contributions from the smallest wild

  19. Pressure Actuated Leaf Seals for Improved Turbine Shaft Sealing

    Science.gov (United States)

    Grondahl, Clayton

    2006-01-01

    This presentation introduces a shaft seal in which leaf seal elements are constructed from slotted shim material formed and layered into a frusto-conical assembly. Limited elastic deflection of seal leaves with increasing system pressure close large startup clearance to a small, non-contacting, steady state running clearance. At shutdown seal elements resiliently retract as differential seal pressure diminishes. Large seal clearance during startup and shutdown provides a mechanism for rub avoidance. Minimum operating clearance improves performance and non-contacting operation promises long seal life. Design features of this seal, sample calculations at differential pressures up to 2400 psid and benefit comparison with brush and labyrinth seals is documented in paper, AIAA 2005 3985, presented at the Advanced Seal Technology session of the Joint Propulsion Conference in Tucson this past July. In this presentation use of bimetallic leaf material will be discussed. Frictional heating of bimetallic leaf seals during a seal rub can relieve the rub condition to some extent with a change in seal shape. Improved leaf seal rub tolerance is expected with bimetallic material.

  20. ?????? ?? ???????? ??????????? ?????????? ?????? ? ?????????? ?? ?????????? ? ?????????? Adobe Captivate

    OpenAIRE

    ??????, ?. ?.

    2012-01-01

    ???????? ?????? ?? ???????? ??????????? ?????????? ?????? (???). ????????????? ???? ?????????? ?????????? ? ??????????? ?????????? ????????. ???????? ???????????? ?? ????????? ???, ??? ????? ?????????? ??? ??????????? ?????????-??????????? ????????? ?? ????????? ?????????? Adobe Captivate. There are the requirements for modern electronic training edition (ETE) in the work. There is the classification of types of ETE training materials in the work. The recommendations for the creation of ...

  1. CAPTIVE AS AN INSURANCE FORMULA FOR RISK MANAGEMENT: ADVANTAGES AND DISADVANTAGES

    Directory of Open Access Journals (Sweden)

    R. Holly

    2017-04-01

    Full Text Available This article introduces subject of an insurance captive entity, with focus on how it could be used as insurance formula for risk management. Captive might be the most appropriate insurance formula for risk management. However, the level of achieved success depends on many factors.Insurance captivesare understood as entities which are formed and owned by companies mostly for the purpose of insuring own risks (pure captive or single parent captive. More and more often captives are also formed by a group of companies (group captives to insure their properties and liabilities towards 3rd parties. Captives are widely used by many companies nowadays. However, many of them,are used solely for a purpose of a risk cession and premium transfer, with an intention to use captivesmore as a profit center in a low taxation country rather than for the purpose of risk management (i.e. a more appropriate role for captive would be to support their owners in enterprise risk management - ERM. This article touches on why captives are not used to their full potential. It may be toochallenging for many decision makers to embrace on captives as risk management formula and extend captives' roles to utilize all possible advantages resulting from owning a captive. Captive can deliver risk management in a more comprehensive way than most commercial insurers on the market. The article also presents advantages and disadvantages of owning an insurance captive.

  2. VAK III. Seals and sealing system

    International Nuclear Information System (INIS)

    d'Agraives, B.C.; Dal Cero, G.; Debeir, R.; Mascetti, E.; Toornvliet, J.; Volcan, A.

    1986-01-01

    This report presents the VAK III seals and sealing system, which have been used over a period of two years at the Kahl nuclear facility (Federal Republic of Germany), where field tests and feasibility studies were conducted in order to offer a possible solution for the sealing of LWR fuel assemblies. It has been prepared with the aim of an assessment study to be done at the IAEA. It gives all characteristics and technical descriptions for: the sealing principle, the seal construction, the operating tools, the data processing, the drawings, the publications related to that seal. The main points of progress are: the Strong Random Internal Defects (STRID) incorporated in the seals, allowing the obtention of a good signature stability; the Integrity Check on the Seal Status (broken or not) obtained through a decisive mechanical improvement: the Double Breakage Integrity Check (DOBRIC) and with a better ultrasonic evidence of that status; the provision of new function tools, allowing the performance of Identity Measurements in dry conditions (which means also at the manufacturer plant) or in deeper water (wet storage); the study and development of a new JRC VAK 45 Compact Instrument Box, in which all the measuring functions can be grouped and incorporating an autonomous Minicomputer offering to the Inspection the possibility of performing, on the spot, Correlation and Decision processes. The general benefit of such a feasibility study should be to convince the potential users that such a Safeguards Sealing System can be studied for slightly - or largely - different other applications, provided that the Basic and Operating Functions required to the system be clearly defined, possibly after a common agreement would be stated

  3. Innovation to reality for improved pump seal performance

    International Nuclear Information System (INIS)

    Wong, W.; Eyvindson, A.; Rhodes, D.B.

    2003-01-01

    'Full-Text:' The nuclear industry requires reliable pump seals. Extended operating conditions for aging plants (i.e., low pressure starts, pressure and temperature transients) and increasing demands from new plants (larger sizes, higher speeds) are pushing the operating envelope for seals. This means that many seals that were previously considered adequate are now requiring increased attention and care. Operating utilities have taken different approaches to addressing their existing, or emerging, seal problems. Primary concerns include maintenance practices, seal design, and monitoring capabilities, as well as operating conditions, transients, pump and motor design. Success in this area requires ongoing dialogue among the station operators, pump manufacturers and seal designers. Regardless of the design, the basic requirement in CANDU is a reliable seal lifetime exceeding 5 years. This paper describes AECL's efforts to meet this requirement through an ongoing program of research and development in seal technology. Current work includes rigorous testing and evaluation of new seal materials and coatings to maximize seal stability and minimize friction and wear (i.e., pressure/temperature transients produce unpredictable shaft movement that can significantly alter face deflections affecting leak rates and seal stability, and sometimes cause the seal to hang-up and de-stage). Also required is a practical method for on-line monitoring of the condition of the seal, whether it is newly installed or after several years of reliable performance. This provides crucial information for inventory, maintenance and outage planning. While new concepts may look good on paper, it is only after they have been demonstrated under fully representative station operating conditions that they can truly be considered ready for field use. AECL CAN-seals lead the nuclear industry in reliability and seal life. They effectively save operators millions of dollars in outage time and person

  4. Captivity, citizenship, and the ethics of otherwise in the society-of-captives thesis: a commentary on Arrigo.

    Science.gov (United States)

    Brown, Michelle

    2013-06-01

    In this engagement with Professor Bruce Arrigo's psychological jurisprudence model, I explore his critique of captivity and risk management. I am particularly interested in his claims that incarceration culminates in society's own captivity, that the most destructive aspect of captivity is its foreclosing of human difference and potentiality, and that a praxis that is both clinical and mindful might point a way out. By way of a case anecdote, I interrogate several of the key terms in Arrigo's formulation-citizenship, reform, revolution, and praxis-in an effort to further conjugate from the ground up such an innovative and important set of possibilities.

  5. Cover-gas seals: 11-LMFBR seal-test program

    International Nuclear Information System (INIS)

    Steele, O.P. III; Horton, P.H.

    1977-01-01

    The objective of the Cover Gas Seal Material Development Program is to perform the engineering development required to provide reliable seals for LMFBR application. Specific objectives are to verify the performance of commercial solid cross-section and inflatable seals under reactor environments including radiation, to develop advanced materials and configurations capable of achieving significant improvement in radioactive gas containment and seal temperature capabilities, and to optimize seal geometry for maximum reliability and minimal gas permeation

  6. Mechanical seals

    CERN Document Server

    Mayer, E

    1977-01-01

    Mechanical Seals, Third Edition is a source of practical information on the design and use of mechanical seals. Topics range from design fundamentals and test rigs to leakage, wear, friction and power, reliability, and special designs. This text is comprised of nine chapters; the first of which gives a general overview of seals, including various types of seals and their applications. Attention then turns to the fundamentals of seal design, with emphasis on six requirements that must be considered: sealing effectiveness, length of life, reliability, power consumption, space requirements, and c

  7. Sealing device

    Science.gov (United States)

    Garcia-Crespo, Andres Jose

    2013-12-10

    A sealing device for sealing a gap between a dovetail of a bucket assembly and a rotor wheel is disclosed. The sealing device includes a cover plate configured to cover the gap and a retention member protruding from the cover plate and configured to engage the dovetail. The sealing device provides a seal against the gap when the bucket assemply is subjected to a centrifugal force.

  8. Mastering Adobe Captivate 7

    CERN Document Server

    Bruyndonckx, Damien

    2014-01-01

    A comprehensive tutorial packed with examples, which is divided into small subtopics that follows a clear and logical outline to help you get to grips with Adobe Captivate 7. Readers are also encouraged to develop their understanding of the tool through practical exercises and experimentations in every chapter. A lot of external references and tips and tricks from established e-Learning professionals are also included. If you are a designer, e-Learning developer, or webmaster who wants to construct an interactive and fun-filled e-Learning project using Adobe Captivate 7, this book is ideal for

  9. Sealing Failure Analysis on V-Shaped Sealing Rings of an Inserted Sealing Tool Used for Multistage Fracturing Processes

    Directory of Open Access Journals (Sweden)

    Gang Hu

    2018-06-01

    Full Text Available The inserted sealing tool is a critical downhole implement that is used to balance the downhole pressure in multistage fracturing operations and prevent fracturing fluid from overflow and/or backward flow. The sealing ring of an inserted sealing tool plays an important role in downhole sealing since a sealing failure would ail the fracturing operation. In order to improve the sealing performance and reduce the potential fracturing failures, this research aims to investigate the influence of V-shaped sealing ring geometries on sealing performance. Constitutive experiments of rubber materials were carried out and the parameters of the constitutive relationship of rubber materials were obtained. A two-dimensional axisymmetric model considering the sealing ring has been established and influences are investigated with considerations of various system parameters and operating conditions. It is found that the stresses concentrated at the shoulder and inner vertex of the sealing ring have direct impact on the damage of the sealing rings under operational conditions. Moreover, the sealing interference, among several other factors, greatly affects the life of the sealing ring. A new design of the sealing ring is suggested with optimized geometric parameters. Its geometric parameters are the edge height of 5 mm, the vertex angle of 90°–100°, and the interference of 0.1 mm, which show a better performance and prolonged operation life of the sealing ring.

  10. Cover gas seals: FFTF-LMFBR seal test program

    International Nuclear Information System (INIS)

    Kurzeka, W.; Oliva, R.; Welch, T.S.; Shimazaki, T.

    1974-01-01

    The objectives of this program are to: (1) conduct static and dynamic tests to demonstrate or determine the mechanical performance of full-size (cross section) FFTF fuel transfer machine and reactor vessel head seals intended for use in a sodium vapor-inert gas environment, (2) demonstrate that these FFTF seals or new seal configurations provide acceptable fission product and cover gas retention capabilities at Clinch River Breeder Reactor Plant (CRBRP) operating environmental conditions other than radiation, and (3) develop improved seals and seal technology for the CRBRP to support the national objective to reduce all atmospheric contaminations to low levels

  11. Impaired immune function in seals and laboratory rats exposed to dioxin-like compounds from Baltic herring

    Energy Technology Data Exchange (ETDEWEB)

    Ross, P.S. [Seal Rehabilitation and Research Centre, Pieterburen (Netherlands)]|[National Inst. of Public Health and Environmental Protection, Bilthoven (Netherlands); Swart, R.L. de [Seal Rehabilitation and Research Centre, Pieterburen (Netherlands)]|[Erasmus Univ., Rotterdam (Netherlands); Timmerman, H.H.; Loveren, H. van [National Inst. of Public Health and Environmental Protection, Bilthoven (Netherlands); Osterhaus, A.D.M.E. [Seal Rehabilitation and Research Centre, Pieterburen (Netherlands)]|[National Inst. of Public Health and Environmental Protection, Bilthoven (Netherlands)]|[Erasmus Univ., Rotterdam (Netherlands)

    1995-12-31

    Complex mixtures of lipophilic contaminants have been shown to affect certain top predators in the aquatic food chain, including seals. A recent demonstration that harbor seals (Phoca vitulina) fed Baltic Sea herring displayed impaired natural killer cell activity and T-lymphocyte function represented the first demonstration of immunotoxicity induced by ambient levels of contaminants in the environment. While these animals had a lower ability to respond to immunizations with inactivated vaccines, specific antibody responses, and in vitro antigen-specific lymphoproliferative responses, obvious constraints limited the ability to extend these results with host resistance tests or an evaluation of thymus and other lymphoid organs. The authors therefore set up a parallel study by exposing pregnant laboratory rats to the same Baltic herring contaminant mixture as received the seals. They then examined immune function parameters and host resistance to virus infection. As in the seals, rat pups of the Baltic group had impaired T-lymphocyte function. In addition, thymus cells and/or their precursors appeared to be targeted, as their numbers and function were reduced in the rats. Following challenge with rat cytomegalovirus in a host resistance study, rat pups in the Baltic group had impaired natural killer cell responses to the virus infection, and lower specific CD8 + (cytotoxic T-lymphocyte) responses following in vitro stimulation. By extrapolation, these results suggest that the impaired immune responses observed in the Baltic group of seals may lead to a less effective defense against virus infections in marine mammals inhabiting polluted coastal waters. Toxicological profiles and results of both the captive seal and laboratory rat experiments tend to implicate the 2,3,7,8-TCDD-like PCB, dioxin and furan congeners in the immunosuppression, and point to a major role for the PCBs.

  12. Longitudinal trajectories of subjective care stressors: the role of personal, dyadic, and family resources.

    Science.gov (United States)

    Bangerter, Lauren R; Liu, Yin; Zarit, Steven H

    2017-11-24

    Stressors are critical to the caregiver stress process, yet little work has examined resources that contribute to longitudinal changes in subjective stressors. The present study examines a variety of factors that contribute to changes in subjective stressors across time. Dementia caregivers (N = 153) completed an in-person interview and eight daily telephone interviews at baseline, and follow up interviews at 6 and 12 months. Growth curve analyses examine how care- and non-care stressors, respite, dyadic relationship quality, family support/conflict and care transitions (e.g. nursing home placement) are associated with changes in role overload and role captivity across 12 months. Caregivers who transitioned out of their role had higher overload and captivity at baseline. Among caregivers who transitioned out of caregiving, higher captivity at baseline was associated with declines in captivity and overload; more non-care stressors at baseline was linked to increased captivity and greater overload across time. Adult day service use and family support were associated with lesser captivity over time; taking more breaks from caregiving was linked to lower overload. Higher dyadic relationship quality was associated with lower captivity and overload. Findings contribute to caregiver intervention efforts by highlighting important resources associated with subjective stressors across time.

  13. Failure analysis and seal life prediction for contacting mechanical seals

    Science.gov (United States)

    Sun, J. J.; He, X. Y.; Wei, L.; Feng, X.

    2008-11-01

    Fault tree analysis method was applied to quantitatively investigate the causes of the leakage failure of mechanical seals. It is pointed out that the change of the surface topography is the main reasons causing the leakage of mechanical seals under the condition of constant preloads. Based on the fractal geometry theory, the relationship between the surface topography and working time were investigated by experiments, and the effects of unit load acting on seal face on leakage path in a mechanical seal were analyzed. The model of predicting seal life of mechanical seals was established on the basis of the relationship between the surface topography and working time and allowable leakage. The seal life of 108 mechanical seal operating at the system of diesel fuel storage and transportation was predicted and the problem of the condition monitoring for the long-period operation of mechanical seal was discussed by this method. The research results indicate that the method of predicting seal life of mechanical seals is feasible, and also is foundation to make scheduled maintenance time and to achieve safe-reliability and low-cost operation for industrial devices.

  14. Ceramic Seal.

    Energy Technology Data Exchange (ETDEWEB)

    Smartt, Heidi A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Romero, Juan A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Custer, Joyce Olsen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hymel, Ross W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Krementz, Dan [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Gobin, Derek [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Harpring, Larry [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Martinez-Rodriguez, Michael [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Varble, Don [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); DiMaio, Jeff [Tetramer Technologies, Pendleton, SC (United States); Hudson, Stephen [Tetramer Technologies, Pendleton, SC (United States)

    2016-11-01

    Containment/Surveillance (C/S) measures are critical to any verification regime in order to maintain Continuity of Knowledge (CoK). The Ceramic Seal project is research into the next generation technologies to advance C/S, in particular improving security and efficiency. The Ceramic Seal is a small form factor loop seal with improved tamper-indication including a frangible seal body, tamper planes, external coatings, and electronic monitoring of the seal body integrity. It improves efficiency through a self-securing wire and in-situ verification with a handheld reader. Sandia National Laboratories (SNL) and Savannah River National Laboratory (SRNL), under sponsorship from the U.S. National Nuclear Security Administration (NNSA) Office of Defense Nuclear Nonproliferation Research and Development (DNN R&D), have previously designed and have now fabricated and tested Ceramic Seals. Tests have occurred at both SNL and SRNL, with different types of tests occurring at each facility. This interim report will describe the Ceramic Seal prototype, the design and development of a handheld standalone reader and an interface to a data acquisition system, fabrication of the seals, and results of initial testing.

  15. Ceramic Seal

    International Nuclear Information System (INIS)

    Smartt, Heidi A.; Romero, Juan A.; Custer, Joyce Olsen; Hymel, Ross W.; Krementz, Dan; Gobin, Derek; Harpring, Larry; Martinez-Rodriguez, Michael; Varble, Don; DiMaio, Jeff; Hudson, Stephen

    2016-01-01

    Containment/Surveillance (C/S) measures are critical to any verification regime in order to maintain Continuity of Knowledge (CoK). The Ceramic Seal project is research into the next generation technologies to advance C/S, in particular improving security and efficiency. The Ceramic Seal is a small form factor loop seal with improved tamper-indication including a frangible seal body, tamper planes, external coatings, and electronic monitoring of the seal body integrity. It improves efficiency through a self-securing wire and in-situ verification with a handheld reader. Sandia National Laboratories (SNL) and Savannah River National Laboratory (SRNL), under sponsorship from the U.S. National Nuclear Security Administration (NNSA) Office of Defense Nuclear Nonproliferation Research and Development (DNN R&D), have previously designed and have now fabricated and tested Ceramic Seals. Tests have occurred at both SNL and SRNL, with different types of tests occurring at each facility. This interim report will describe the Ceramic Seal prototype, the design and development of a handheld standalone reader and an interface to a data acquisition system, fabrication of the seals, and results of initial testing.

  16. Captive Conditions of Pet Lemurs in Madagascar.

    Science.gov (United States)

    Reuter, Kim E; Schaefer, Melissa S

    2016-01-01

    Live extraction of wildlife is a threat to biodiversity and can compromise animal welfare standards. Studies of the captive environments and welfare of pet primates are known, but none has focused on Madagascar. We aimed to expand knowledge about the captive conditions of pet lemurs in Madagascar. We hypothesized that captive lemurs would often be kept in restrictive settings, including small cages, would be fed foods inconsistent with their natural diets and, as a result, would be in bad physical or psychological health. Data were collected via a web-based survey (n = 253 reports) and from the websites and social media pages of 25 hotels. Most lemurs seen by respondents were either kept on a rope/leash/chain or in a cage (67%), though some lemurs were habituated and were not restrained (28%). Most of the time (72%) cages were considered small, and lemurs were rarely kept in captivity together with other lemurs (81% of lemurs were caged alone). Pet lemurs were often fed foods inconsistent with their natural diets, and most (53%) were described as being in bad health. These findings point to a need to undertake outreach to pet lemur owners in Madagascar about the captivity requirements of primates. © 2016 S. Karger AG, Basel.

  17. Mechanical seal assembly

    Science.gov (United States)

    Kotlyar, Oleg M.

    2001-01-01

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

  18. Mechanical Seal Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Kotlyar, Oleg M.

    1999-06-18

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

  19. Age and sex-specific mortality of wild and captive populations of a monogamous pair-bonded primate (Aotus azarae)

    DEFF Research Database (Denmark)

    Larson, Sam; Colchero, Fernando; Jones, Owen

    2016-01-01

    In polygynous primates, a greater reproductive variance in males has been linked to their reduced life expectancy relative to females. The mortality patterns of monogamous pair-bonded primates, however, are less clear. We analyzed the sex differences in mortality within wild (NMales = 70, NFemales...... = 73) and captive (NMales = 25, NFemales = 29) populations of Azara's owl monkeys (Aotus azarae), a socially and genetically monogamous primate exhibiting bi-parental care. We used Bayesian Survival Trajectory Analysis (BaSTA) to test age-dependent models of mortality. The wild and captive populations...

  20. Glass sealing

    Energy Technology Data Exchange (ETDEWEB)

    Brow, R.K.; Kovacic, L.; Chambers, R.S. [Sandia National Labs., Albuquerque, NM (United States)

    1996-04-01

    Hernetic glass sealing technologies developed for weapons component applications can be utilized for the design and manufacture of fuel cells. Design and processing of of a seal are optimized through an integrated approach based on glass composition research, finite element analysis, and sealing process definition. Glass sealing procedures are selected to accommodate the limits imposed by glass composition and predicted calculations.

  1. Rotary plug seal

    International Nuclear Information System (INIS)

    Ito, Koji; Abiko, Yoshihiro.

    1981-01-01

    Purpose: To enable fuel exchange even upon failure of regular seals and also to enable safety seal exchange by the detection of the reduction in the contact pressure of a rotary plug seal. Constitution: If one of a pair of regular tube seals for the rotary plug is failed during ordinary operation of a FBR type reactor, the reduction in the contact pressure of the seal to the plug gibbousness is detected by a pressure gauge and a solenoid valve is thereby closed. Thus, a back-up-tube seal provided above or below the tube seal is press-contacted by way of argon gas to the gibbousness to enter into operation state and lubricants are supplied from an oil tank. In such a structure, the back-up-tube seal is operated before the failure of the tube seal to enable to continue the fuel exchange work, as well as safety exchange for the tube seal. (Moriyama, K.)

  2. Sealing performance of a magnetic fluid seal for rotary blood pumps.

    Science.gov (United States)

    Mitamura, Yoshinori; Takahashi, Sayaka; Kano, Kentaro; Okamoto, Eiji; Murabayashi, Shun; Nishimura, Ikuya; Higuchi, Taka-Aki

    2009-09-01

    A magnetic fluid (MF) for a rotary blood pump seal enables mechanical contact-free rotation of the shaft and, hence, has excellent durability. The performance of a MF seal, however, has been reported to decrease in liquids. We have developed a MF seal that has a "shield" mechanism and a new MF with a higher magnetization of 47.9 kA/m. The sealing performance of the MF seal installed in a rotary blood pump was studied. Under the condition of continuous flow, the MF seal remained in perfect condition against a pressure of 298 mm Hg (pump flow rate: 3.96 L/min). The seal was also perfect against a pressure of 170 mm Hg in a continuous flow of 3.9 L/min for 275 days. We have developed a MF seal that works in liquid against clinically used pressures. The MF seal is promising as a shaft seal for rotary blood pumps.

  3. 77 FR 42941 - Captive Nations Week, 2012

    Science.gov (United States)

    2012-07-20

    ..., 2012 Captive Nations Week, 2012 By the President of the United States of America A Proclamation When... unbreakable bonds endure. During Captive Nations Week, America renews our abiding ties to all peoples who... sound the call for reform. We see the same fierce hope in those who defy censorship and reach beyond an...

  4. Captive-rearing piping plovers: Developing techniques to augment wild populations

    Science.gov (United States)

    Powell, A.N.; Cuthbert, F.J.; Wemmer, L.C.; Doolittle, A.W.; Feirer, S.T.

    1997-01-01

    Techniques for captive-rearing and releasing piping plovers (Charadrius melodus) were developed using a surrogate species, killdeer (Charadrius vociferus). We compared captive-and parent-reared killdeer, and parent-reared piping plovers and determined that growth and behavior were similar. After surrogate trials determined that captive-rearing was feasible, we used the same methods to raise piping plover chicks from salvaged eggs. For captive-reared chick of both species, survival to fledging was higher than and behaviors similar to parent-reared chicks in the wild. Rearing techniques were fine-tuned, and ten piping plover fledglings were released to the wild. Based on our results, we developed recommendations for captive-rearing piping plovers using salvaged eggs to enhance productivity of small populations. ?? 1997 Wiley-Liss, Inc.

  5. Developments in amphibian captive breeding and reintroduction programs.

    Science.gov (United States)

    Harding, Gemma; Griffiths, Richard A; Pavajeau, Lissette

    2016-04-01

    Captive breeding and reintroduction remain high profile but controversial conservation interventions. It is important to understand how such programs develop and respond to strategic conservation initiatives. We analyzed the contribution to conservation made by amphibian captive breeding and reintroduction since the launch of the International Union for Conservation of Nature (IUCN) Amphibian Conservation Action Plan (ACAP) in 2007. We assembled data on amphibian captive breeding and reintroduction from a variety of sources including the Amphibian Ark database and the IUCN Red List. We also carried out systematic searches of Web of Science, JSTOR, and Google Scholar for relevant literature. Relative to data collected from 1966 to 2006, the number of species involved in captive breeding and reintroduction projects increased by 57% in the 7 years since release of the ACAP. However, there have been relatively few new reintroductions over this period; most programs have focused on securing captive-assurance populations (i.e., species taken into captivity as a precaution against extinctions in the wild) and conservation-related research. There has been a shift to a broader representation of frogs, salamanders, and caecilians within programs and an increasing emphasis on threatened species. There has been a relative increase of species in programs from Central and South America and the Caribbean, where amphibian biodiversity is high. About half of the programs involve zoos and aquaria with a similar proportion represented in specialist facilities run by governmental or nongovernmental agencies. Despite successful reintroduction often being regarded as the ultimate milestone for such programs, the irreversibility of many current threats to amphibians may make this an impractical goal. Instead, research on captive assurance populations may be needed to develop imaginative solutions to enable amphibians to survive alongside current, emerging, and future threats. © 2015

  6. Electronic self-monitoring seal

    International Nuclear Information System (INIS)

    Campbell, J.W.

    1978-01-01

    The Electronic Self-Monitoring Seal is a new type of security seal which allows continuous verification of the seal's identity and status. The identity information is a function of the individual seal, time, and seal integrity. A description of this seal and its characteristics are presented. Also described are the use cycle for the seal and the support equipment for programming and verifying the seal

  7. Inboard seal mounting

    Science.gov (United States)

    Hayes, John R. (Inventor)

    1983-01-01

    A regenerator assembly for a gas turbine engine has a hot side seal assembly formed in part by a cast metal engine block having a seal recess formed therein that is configured to supportingly receive ceramic support blocks including an inboard face thereon having a regenerator seal face bonded thereto. A pressurized leaf seal is interposed between the ceramic support block and the cast metal engine block to bias the seal wear face into sealing engagement with a hot side surface of a rotary regenerator matrix.

  8. Security seal

    Science.gov (United States)

    Gobeli, Garth W.

    1985-01-01

    Security for a package or verifying seal in plastic material is provided by a print seal with unique thermally produced imprints in the plastic. If tampering is attempted, the material is irreparably damaged and thus detectable. The pattern of the imprints, similar to "fingerprints" are recorded as a positive identification for the seal, and corresponding recordings made to allow comparison. The integrity of the seal is proved by the comparison of imprint identification records made by laser beam projection.

  9. Mechanical seal program

    International Nuclear Information System (INIS)

    Lowery, G.B.

    1983-01-01

    The experimental plans and timing for completion of the mechanical seal program for both the slurry and transfer pumps are given. The slurry pump seal program will be completed by April 1984 with turnover of two seals in pumps to SRP Tank 15H. Transfer pump seal design will be released for plant use by May 1984. Also included are various other pump and seal related tests

  10. Secondary seal effects in hydrostatic non-contact seals for reactor coolant pump shaft

    International Nuclear Information System (INIS)

    Fujita, T.; Koga, T.; Tanoue, H.; Hirabayashi, H.

    1987-01-01

    The paper presents a seal flow analysis in a hydrostatic non-contact seal for a PWR coolant pump shaft. A description is given of the non-contact seal for the reactor coolant pump. Results are presented for a distortion analysis of the seal ring, along with the seal flow characteristics and the contact pressure profiles of the secondary seals. The results of the work confirm previously reported findings that the seal ring distortion is sensitive to the o-ring location (which was placed between the ceramic seal face and the seal ring retainer). The paper concludes that the seal flow characteristics and the tracking performance depend upon the dynamic properties of the secondary seal. (U.K.)

  11. Design optimization of seal structure for sealing liquid by magnetic fluids

    International Nuclear Information System (INIS)

    Liu Tonggang; Cheng Yusheng; Yang Zhiyi

    2005-01-01

    The durability of the magnetic fluid seal clearly decreases when sealing another liquid because of the interface instability caused by the applied magnetic field and the velocity difference of the two liquids. With an intention to establish a stable interface during sealing liquid, a new magnetic fluid seal was developed in this paper. The parameters of the structure were optimized by a simulation apparatus. And the magnetic fluid seal designed based on the optimum parameters shows good performance and long life for sealing lubricating oil

  12. Comparative analyses of tooth wear in free-ranging and captive wild equids.

    Science.gov (United States)

    Taylor, L A; Müller, D W H; Schwitzer, C; Kaiser, T M; Castell, J C; Clauss, M; Schulz-Kornas, E

    2016-03-01

    Captive breeding has played a crucial role in the conservation of threatened equid species. Grazing ruminants and rhinoceros in captivity have less abrasion-dominated tooth wear than their free-ranging conspecifics, with potential negative consequences for their health. However, a similar study on wild equids in captivity is missing. The aim was to establish if different tooth wear patterns are exhibited by free-ranging and captive equids. Cross-sectional study of museum specimens comparing free-ranging and captive equids. Dental casts of maxillary cheek teeth of 228 museum specimens (122 from free-ranging and 106 from captive individuals) of 7 wild equid species were analysed using the extended mesowear method. Although teeth showing specific abnormalities were not scored, the presence of focal overgrowths (hooks) of the rostral premolars (106, 206) was recorded. Captive Equus ferus przewalskii, E. grevyi, E. hemionus, E. quagga boehmi and E. zebra hartmannae have less abrasion-dominated tooth wear on their premolars than their free-ranging conspecifics (P<0.001). Fewer differences were exhibited between populations in the molars. No differences were exhibited in the distal cusp of the molars (110, 210) between populations, except in a small sample of E. kiang. Captive equids exhibited more homogeneous wear along the tooth row whereas free-ranging equids exhibited a tooth wear gradient, with more abrasion on premolars than molars. There were more rostral hooks on the premolars (106, 206) in the captive than the free-ranging population (P = 0.02). Captive equids did experience less abrasion-dominated tooth wear than their free-ranging conspecifics, but the differences in tooth wear were less pronounced than those between captive and free-ranging wild ruminant and rhinoceros species. This indicates that feeding regimes for captive equids deviate less from natural diets than those for captive ruminants and rhinoceros but that factors leading to hook

  13. Seal arrangement

    International Nuclear Information System (INIS)

    Dempsey, J.D.

    1978-01-01

    A hydraulically balanced face type shaft seal is provided in which the opening and closing seal face areas retain concentricity with each other in the event of lateral shaft displacement. The seal arrangement is for a vertical high pressure pump, indented for use in the cooling system of a nuclear reactor. (Auth.)

  14. Seroprevalence of Antibodies against Seal Influenza A(H10N7) Virus in Harbor Seals and Gray Seals from the Netherlands.

    Science.gov (United States)

    Bodewes, Rogier; Rubio García, Ana; Brasseur, Sophie M; Sanchez Conteras, Guillermo J; van de Bildt, Marco W G; Koopmans, Marion P G; Osterhaus, Albert D M E; Kuiken, Thijs

    2015-01-01

    In the spring and summer 2014, an outbreak of seal influenza A(H10N7) virus infection occurred among harbor seals (Phoca vitulina) off the coasts of Sweden and Denmark. This virus subsequently spread to harbor seals off the coasts of Germany and the Netherlands. While thousands of seals were reported dead in Sweden, Denmark and Germany, only a limited number of seals were found dead in the Netherlands. To determine the extent of exposure of seals in the Netherlands to influenza A/H10N7 virus, we measured specific antibody titers in serum samples from live-captured seals and seals admitted for rehabilitation in the Netherlands by use of a hemagglutination inhibition assay and an ELISA. In harbor seals in 2015, antibodies against seal influenza A(H10N7) virus were detected in 41% (32 out of 78) pups, 10% (5 out of 52) weaners, and 58% (7 out of 12) subadults or adults. In gray seals (Halichoerus grypus) in 2015, specific antibodies were not found in the pups (n = 26), but in 26% (5 out of 19) of the older animals. These findings indicate that, despite apparent low mortality, infection with seal influenza A(H10N7) virus was geographically widespread and also occurred in grey seals.

  15. Harbor Seal (Phoca vitulina) Reproductive Advertisement Behavior and the Effects of Vessel Noise

    Science.gov (United States)

    Matthews, Leanna P.

    overlaps with peak tourism in Glacier Bay, and the majority of tourists visit the park on a motorized vessel. Because of this overlap, I investigated the impacts of vessel noise on the vocal behavior of individual males. In the presence of vessel noise, male harbor seals increase the amplitude of their vocalizations, decrease the duration, and increase the minimum frequency. These vocal shifts are similar to studies of noise impacts on other species across taxa, but it is unknown how this could impact the reproductive success of male harbor seals. Finally, I looked at the role of female preference for male vocalizations. Using playbacks of male vocalizations to captive female harbor seals, I found that females have a higher response to vocalizations that correspond to dominant males. Females were less responsive to subordinate male vocalizations, which had a shorter duration and a higher frequency. Given that male harbor seals decrease the duration and increase the frequency of vocalizations in the presence of noise, it is possible that these vocalizations become less attractive in noise.

  16. Seal design alternatives study

    International Nuclear Information System (INIS)

    Van Sambeek, L.L.; Luo, D.D.; Lin, M.S.; Ostrowski, W.; Oyenuga, D.

    1993-06-01

    This report presents the results from a study of various sealing alternatives for the WIPP sealing system. Overall, the sealing system has the purpose of reducing to the extent possible the potential for fluids (either gas or liquid) from entering or leaving the repository. The sealing system is divided into three subsystems: drift and panel seals within the repository horizon, shaft seals in each of the four shafts, and borehole seals. Alternatives to the baseline configuration for the WIPP seal system design included evaluating different geometries and schedules for seal component installations and the use of different materials for seal components. Order-of-magnitude costs for the various alternatives were prepared as part of the study. Firm recommendations are not presented, but the advantages and disadvantages of the alternatives are discussed. Technical information deficiencies are identified and studies are outlined which can provide required information

  17. Rabies in Captive Deer

    Centers for Disease Control (CDC) Podcasts

    2012-04-30

    Dr. Brett Petersen, a medical officer at CDC, discusses rabies in captive deer.  Created: 4/30/2012 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 4/30/2012.

  18. Reproductive profile of captive Sumateran tiger (Panthera tigris sumatrae

    Directory of Open Access Journals (Sweden)

    GONO SEMIADI

    2006-10-01

    Full Text Available The Sumatran tiger (Panthera tigris sumatrae is one of several endemic Indonesian wild cat groups which population is critically endangered. A program to increase the population size had been conducted in captivity, especially in the zoo. In order to monitor the captive population and for the means of management in captivity, a logbook data recording system had been developed for individual animals. A compilation data from the Tiger International Stud Book from 1942 to 2000 was analyzed. The extraction data consisted of the reproduction performance of the animals, such as calving pattern, sex ratio, litter size etc. The results showed that mortality of cubs at ≤ 5 months old reached 59%, between 5 and 24 months old was 9.3% and above 24 months was 31.7%. Cubs were born all year round with concentration in July for Europe and North America regions. The mean of first reproductive age was at 4.6 years old (± 2.28, with the mean of the oldest reproductive age was at 8.3 years (± 3.63. Mean litter size was 2.21 cubs from dame born in captivity and 2.45 cubs from dame capture from the wild. Sex ratio of male to female was 53.8:46.2. The average lifespan of adult wild captive tiger was 5108.9 day (± 2365.4 day, while for adult (≥ 24 months of age captive tiger was 4417.4 day (± 1972.7.

  19. Nuclear waste vault sealing

    International Nuclear Information System (INIS)

    Gyenge, M.

    1980-01-01

    A nuclear waste vault must be designed and built to ensure adequate isolation of the nuclear wastes from human contact. Consequently, after a vault has been fully loaded, it must be adequately sealed off to prevent radionuclide migration which may be provided by circulating groundwater. Vault sealing entails four major aspects, i.e.: (a) vault grouting; (b) borehole sealing; (c) buffer packing; and (d) backfilling. Of particular concern in vault sealing are the physical and chemical properties of the sealing material, its long-term durability and stability, and the techniques used for its emplacement. Present sealing technology and sealing materials are reviewed in terms of the particular needs of vault sealing. Areas requiring research and development are indicated

  20. Nozzle seal

    International Nuclear Information System (INIS)

    Herman, R.F.

    1977-01-01

    In an illustrative embodiment of the invention, a nuclear reactor pressure vessel, having an internal hoop from which the heated coolant emerges from the reactor core and passes through to the reactor outlet nozzles, is provided with sealing members operatively disposed between the outlet nozzle and the hoop. The sealing members are biased against the pressure vessel and the hoop and are connected by a leak restraining member establishing a leak-proof condition between the inlet and outlet coolants in the region about the outlet nozzle. Furthermore, the flexible responsiveness of the seal assures that the seal will not structurally couple the hoop to the pressure vessel

  1. Nozzle seal

    International Nuclear Information System (INIS)

    Walling, G.A.

    1977-01-01

    In an illustrative embodiment of the invention, a nuclear reactor pressure vessel, having an internal hoop from which the heated coolant emerges from the reactor core and passes through to the reactor outlet nozzles, is provided with sealing rings operatively disposed between the outlet nozzles and the hoop. The sealing rings connected by flexible members are biased against the pressure vessel and the hoop, establishing a leak-proof condition between the inlet and outlet coolants in the region about the outlet nozzle. Furthermore, the flexible responsiveness of the seal assures that the seal will not structurally couple the hoop to the pressure vessel. 4 claims, 2 figures

  2. Adobe Captivate 7 for mobile learning

    CERN Document Server

    Bruyndonckx, Damien

    2013-01-01

    A tutorial-based approach to learning the basics of Adobe Captivate to help bring your existing eLearning content to mobile platforms. The book will help readers to learn at their own pace with practical examples and step-by-step instructions.This book has been primarily written for teachers, course designers, professors, curriculum experts, subject matter experts, and eLearning developers who want to provide mobile-friendly content to their students.A basic knowledge of your operating system is required to follow the exercises of this book. No prior knowledge of Captivate is required, althoug

  3. Flexible ring seal

    International Nuclear Information System (INIS)

    Abbes, Claude; Gournier, Andre; Rouaud, Christian; Villepoix, Raymond de.

    1976-01-01

    The invention concerns a flexible metal ring seal, able to ensure a perfect seal between two bearings due to the crushing and elastic deformation properties akin to similar properties in elastomers. Various designs of seal of this kind are already known, particularly a seal made of a core formed by a helical wire spring with close-wound turns and with high axial compression ratio, closed on itself and having the shape of an annulus. This wire ring is surrounded by at least one envelope having at rest the shape of a toroidal surface of which the generating circle does not close on itself. In a particular design mode, the seal in question can include, around the internal spring, two envelopes of which one in contact with the spring is composed of a low ductility elastic metal, such as mild steel or stainless steel and the other is, on the contrary, made of a malleable metal, such as copper or nickel. The first envelope evenly distributes the partial crushing of the spring, when the seal is tightened, on the second envelope which closely fits the two surfaces between which the seal operates. The stress-crushing curve characteristic of the seal comprises two separate parts, the first with a relatively sharp slope corresponds to the start of the seal compression phase, enabling at least some of these curves to reach the requisite seal threshold very quickly, then, beyond this, a second part, practically flat, where the stress is appreciably constant for a wide operating bracket [fr

  4. Active Infrared Thermography for Seal Contamination Detection in Heat-Sealed Food Packaging

    Directory of Open Access Journals (Sweden)

    Karlien D’huys

    2016-11-01

    Full Text Available Packaging protects food products from environmental influences, assuring quality and safety throughout shelf life if properly performed. Packaging quality depends on the quality of the packaging material and of the closure or seal. A common problem possibly jeopardizing seal quality is the presence of seal contamination, which can cause a decreased seal strength, an increased packaging failure risk and leak formation. Therefore, early detection and removal of seal contaminated packages from the production chain is crucial. In this work, a pulsed-type active thermography method using the heated seal bars as an excitation source was studied for detecting seal contamination. Thermal image sequences of contaminated seals were recorded shortly after sealing. The detection performances of six thermal image processing methods, based on a single frame, a fit of the cooling profiles, thermal signal reconstruction, pulsed phase thermography, principal component thermography and a matched filter, were compared. High resolution digital images served as a reference to quantify seal contamination, and processed thermal images were mapped to these references. The lowest detection limit (equivalent diameter 0.60 mm was obtained for the method based on a fit of the cooling profiles. Moreover, the detection performance of this method did not depend strongly on the time after sealing at which recording of the thermal images was started, making it a robust and generally applicable method.

  5. Nuclear reactor sealing system

    International Nuclear Information System (INIS)

    McEdwards, J.A.

    1983-01-01

    A liquid metal-cooled nuclear reactor sealing system is disclosed. The nuclear reactor includes a vessel sealed at its upper end by a closure head. The closure head comprises at least two components, one of which is rotatable; and the two components define an annulus therebetween. The sealing system includes at least a first and second inflatable seal disposed in series in an upper portion of the annulus. The system further includes a dip seal extending into a body of insulation located adjacent a bottom portion of the closure head. The dip seal comprises a trough formed by a lower portion of one of the components, and a seal blade pendently supported from the other component and extending downwardly into the trough. A body of liquid metal is contained in the trough which submerges a portion of the seal blade. The seal blade is provided with at least one aperture located above the body of liquid metal for providing fluid communication between the annulus intermediate the dip seal and the inflatable seals, and a body of cover gas located inside the vessel. There also is provided means for introducing a purge gas into the annulus intermediate the inflatable seals and the seal blade. The purge gas is introduced in an amount sufficient to substantially reduce diffusion of radioactive cover gas or sodium vapor up to the inflatable seals. The purge gas mixes with the cover gas in the reactor vessel where it can be withdrawn from the vessel for treatment and recycle to the vessel

  6. The IRES electronic seal

    International Nuclear Information System (INIS)

    Autrusson, B.; Brochard, D.; Moreau, J.F.; Martin, J.C.

    2001-01-01

    In the framework of the French Support Program for the IAEA Safeguards, the 'Institut de Protection et de Surete Nucleaire' (IPSN), developed an electronic seal called Integrated and Reusable Electronic Seal (IRES) that enables independent verification by different inspectorates (IAEA, Euratom, and National Inspectorate). The seal can be remotely interrogated by radio frequency and integrated to other Containment/surveillance systems by serial line RS 485. Data are authenticated and the IRESMAG software manages in the seal reader all functionalities of the seal and records inspection data compatible with the IAEA's Seal Database. To perform this development, IPSN relies on industrial partners: SAPHYMO for the general architecture of the seal and the electronics, THALES for the authentication of data and the security of transmission. The main features of the IRES seal are the following: Interrogation by different inspectorate, allowing independent conclusions; Recording of events, including tampering, in a non-volatile memory; Authentication of data and enhanced security of the communication between the seal and the seal reader; Remote interrogation by an inspector or/and automatic for unattended systems or remote monitoring; Reusable after erasing the seal memory and replacement of the batteries

  7. Compliant seal development

    Science.gov (United States)

    Hendricks, Robert C.

    1993-10-01

    The compliant metallic seal combines the noncontact feature of the labyrinth seal, the low leakage of a mechanical seal, and the compliant nature of the brush seal. It consists of several thin metallic elements or leaves mounted within a ring which is press fit into the housing, and in form, sort of resembles a lip seal sections wiping the shaft. A second set of overlapping cover leaves are placed on top of the shaft riding leaves which reduces leakage and provides stiffness. The leaves can be straight or angle cut. The shaft riding fingers are designed with mismatched curvature to provide lift off similar to the Rayleigh lift pads in mechanical seals with leading edge clearances nearly twice those of the trailing edge as as shown by Fleming to be optimal for gas flows in convergent seal passages. Leading edge clearances range from 300 to 500 microinches. Balance pockets beneath the leaves provide fluid film feed to the 'Rayleigh lift' surface and the proper balance ratio (mechanical seal) when combined with the static pressure and film pressure. The leaves flex in the radial direction and accommodate thermomechanical behavior as well as axial motion and angular misalignment. In the static mode, there is a net closing force on the leaves. The seals were tested to 70 psi at speeds to 16,000 rpm or surface speeds to 330 fps and temperatures from ambient to 440 F. A slow cycle through the rig critical at 10,000 rpm induced a radial vibration response of 0.004 to 0.005 inch were accommodated by the seal. Preliminary performance data are encouraging demonstrating hydrodynamic liftoff and noncontacting operation at pressure and speeds typical of gas turbine engines. The leakage performance data are significantly better than commercial labyrinth and brush seals which should be expected as this design incorporates the features of the low leakage face or mechanical seal along with the flexibility of the brush configuration.

  8. Self-acting shaft seals

    Science.gov (United States)

    Ludwig, L. P.

    1978-01-01

    Self-acting seals are described in detail. The mathematical models for obtaining a seal force balance and the equilibrium operating film thickness are outlined. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis reveals three different vibration models with secondary seal friction being an important parameter. Leakage flow inlet pressure drop and affects of axisymmetric sealing face deformations are discussed. Experimental data on self-acting face seals operating under simulated gas turbine conditions are given. Also a spiral groove seal design operated to 244 m/sec (800 ft/sec) is described.

  9. HMSRP Hawaiian Monk Seal Master Identification Records (seal)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records of all individually identified Hawaiian monk seals since 1981. These seals were identified by PSD personnel and cooperating scientists...

  10. Enhanced sealing project (ESP): design, construction and monitoring of a full-scale shaft seal

    International Nuclear Information System (INIS)

    Dixon, D.; Martino, J.; Kim, C.S.; Holowick, B.; Kwong, G.; Jonsson, E.; Palonen, E.; DeCombarieu, M.

    2010-01-01

    a result of this opportunity, these four organizations have partnered to support a package of work managed by AECL that will see the NRCan-funded construction of the shaft seal enhanced through the installation of a suite of monitoring instruments in the main shaft seal. However, the ventilation raise seal will not be instrumented. Each of the participants have provided technical input to the design of the seal and the sensor suite installed, providing this construction with a very well defined scope and focus, as well as an opportunity to test a variety of sensors under repository-like conditions. A challenge not previously dealt with in an underground laboratory is the issue of dealing with very long cable lengths (> 300 m) necessary to reach from the sensor installation point to a location where a logger can be installed and monitored. This has been dealt with by using a combination of three data logging techniques, including a watertight pressure-resistant logger, a sacrificial logger that is required to last only until water reaches it and selection of sensors that are capable of tolerating long cable lengths. The main shaft of the URL at the location of the seal is circular, having been excavated using careful drill and blast techniques. The seal itself consists of two keyed, conical sectioned, concrete sections 3-m-thick by 5- to 6-m diameter that confine a 6-m-thick swelling clay section. The lower concrete section, based approximately 279 m below the ground surface consists of reinforced low-heat, low-pH, high performance concrete that is intended to have minimal chemical influence on its surroundings. The clay segment of the seal consists of a mixture of Wyoming bentonite and sand-sized aggregate that is densely compacted using conventional compaction techniques. This bentonite-sand material provides a substantial self-sealing capacity to the installation and will minimize mass transport into the fracture zone. The upper concrete segment consists of a

  11. Sealing devices

    International Nuclear Information System (INIS)

    Coulson, R.A.

    1980-01-01

    A sealing device for minimising the leakage of toxic or radioactive contaminated environments through a biological shield along an opening through which a flexible component moves that penetrates the shield. The sealing device comprises an outer tubular member which extends over a length not less than the maximum longitudinal movement of the component along the opening. An inner sealing block is located intermediate the length of the component by connectors and is positioned in the bore of the outer tubular member to slide in the bore and effect a seal over the entire longitudinal movement of the component. The cross-section of the device may be circular and the block may be of polytetrafluoroethylene or of nylon impregnated with molybdenum or may be metallic. A number of the sealing devices may be combined into an assembly for a plurality of adjacent longitudinally movable components, each adapted to sustain a tensile load, providing the various drives of a master-slave manipulator. (author)

  12. Hermetically Sealed Compressor

    Science.gov (United States)

    Holtzapple, Mark T.

    1994-01-01

    Proposed hermetically sealed pump compresses fluid to pressure up to 4,000 atm (400 MPa). Pump employs linear electric motor instead of rotary motor to avoid need for leakage-prone rotary seals. In addition, linear-motor-powered pump would not require packings to seal its piston. Concept thus eliminates major cause of friction and wear. Pump is double-ended diaphragm-type compressor. All moving parts sealed within compressor housing.

  13. Feeding kinematics, suction, and hydraulic jetting performance of harbor seals (Phoca vitulina.

    Directory of Open Access Journals (Sweden)

    Christopher D Marshall

    Full Text Available The feeding kinematics, suction and hydraulic jetting capabilities of captive harbor seals (Phoca vitulina were characterized during controlled feeding trials. Feeding trials were conducted using a feeding apparatus that allowed a choice between biting and suction, but also presented food that could be ingested only by suction. Subambient pressure exerted during suction feeding behaviors was directly measured using pressure transducers. The mean feeding cycle duration for suction-feeding events was significantly shorter (0.15±0.09 s; P<0.01 than biting feeding events (0.18±0.08 s. Subjects feeding in-water used both a suction and a biting feeding mode. Suction was the favored feeding mode (84% of all feeding events compared to biting, but biting comprised 16% of feeding events. In addition, seals occasionally alternated suction with hydraulic jetting, or used hydraulic jetting independently, to remove fish from the apparatus. Suction and biting feeding modes were kinematically distinct regardless of feeding location (in-water vs. on-land. Suction was characterized by a significantly smaller gape (1.3±0.23 cm; P<0.001 and gape angle (12.9±2.02°, pursing of the rostral lips to form a circular aperture, and pursing of the lateral lips to occlude lateral gape. Biting was characterized by a large gape (3.63±0.21 cm and gape angle (28.8±1.80°; P<0.001 and lip curling to expose teeth. The maximum subambient pressure recorded was 48.8 kPa. In addition, harbor seals were able to jet water at food items using suprambient pressure, also known as hydraulic jetting. The maximum hydraulic jetting force recorded was 53.9 kPa. Suction and hydraulic jetting where employed 90.5% and 9.5%, respectively, during underwater feeding events. Harbor seals displayed a wide repertoire of behaviorally flexible feeding strategies to ingest fish from the feeding apparatus. Such flexibility of feeding strategies and biomechanics likely forms the basis of their

  14. Captive power generation in Saudi Arabia—Overview and recommendations on policies

    International Nuclear Information System (INIS)

    Abdul-Majeed, Mohammed Arif; Al-Hadhrami, Luai M.; Al-Soufi, Khaled Y.; Ahmad, Firoz; Rehman, Shafiqur

    2013-01-01

    The power sector in the Kingdom of Saudi Arabia is undergoing the restructuring process. Moreover, during the last decade the Kingdom has witnessed a phenomenal growth in the load demand, consequently a huge amount of generation is added to the electric utilities to meet the load. Up to now only the electric utility generation was taken in the planning of the electrical sector. The data regarding the captive power generation was not readily available. A survey is conducted regarding the captive power generation in Saudi Arabia based on its utilization pattern, fuel used and amount of excess energy available to the grid. The existing regulatory framework and institutional structure of the Saudi power industry was also reviewed. Based on the information collected in the survey of captive power, key guidelines that may be considered in developing the policy for the captive power generators are presented. Furthermore, these guidelines and later the policies will help promote the investors to come forward in developing the captive power generation in Saudi Arabia. -- Highlights: •Database of captive power generation in the Kingdom of Saudi Arabia. •Historical perspective of electrical power industry in the Kingdom. •Saudi Arabia′s power requirements. •Regulatory framework and key guidelines regarding captive power generation. •It is first of its kind study in the region

  15. Reinforced seal component

    International Nuclear Information System (INIS)

    Jeanson, G.M.; Odent, R.P.

    1980-01-01

    The invention concerns a seal component of the kind comprising a soft sheath and a flexible reinforcement housed throughout the entire length of the sheath. The invention enables O ring seals to be made capable of providing a radial seal, that is to say between two sides or flat collars of two cylindrical mechanical parts, or an axial seal, that is to say between two co-axial axisymmetrical areas. The seal so ensured is relative, but it remains adequately sufficient for many uses, for instance, to ensure the separation of two successive fixed blading compartments of axial compressors used in gas diffusion isotope concentration facilities [fr

  16. Numerical Investigation of the Effect of Radial Lip Seal Geometry on Sealing Performance

    Science.gov (United States)

    Tok, G.; Parlar, Z.; Temiz, V.

    2018-01-01

    Sealing elements are often needed in industry and especially in machine design. With the change and development of machine technology from day to day, sealing elements show continuous development and change in parallel with these developments. Many factors influence the performance of the sealing elements such as shaft surface roughness, radial force, lip geometry etc. In addition, the radial lip seals must have a certain pre-load and interference in order to provide a good sealing. This also affects the friction torque. Researchers are developing new seal designs to reduce friction losses in mechanical systems. In the presented study, the effect of the lip seal geometry on sealing performance will be examined numerically. The numerical model created for this purpose will be verified with experimental data firstly. In the numerical model, shaft and seal will be modeled as hyper-elastic in 2D and 3D. NBR (Nitrile Butadiene Rubber) as seal material will be analyzed for the rotating shaft state at constant speed by applying a uniform radial force.

  17. Redfish Lake sockeye salmon captive broodstock rearing and research, 1994. Annual report

    International Nuclear Information System (INIS)

    Flagg, T.A.; McAuley, W.C.; Wastel, M.R.; Frost, D.A.; Mahnken, C.V.W.

    1996-03-01

    The National Marine Fisheries Service (NMFS) Northwest Fisheries Science Center, in cooperation with the Idaho Department of Fish and Game (IDFG) and the Bonneville Power Administration, has established captive broodstocks to aid recovery of Snake River sockeye salmon (Oncorhynchus nerka) listed as endangered under the US Endangered Species Act (ESA). Captive broodstock programs are emerging as an important component of restoration efforts for ESA-listed salmon populations. Captive broodstock programs are a form of artificial propagation. However, they differ from standard hatchery techniques in one important respect: fish are cultured in captivity for the entire life cycle. The high fecundity of Pacific salmon, coupled with their potentially high survival in protective culture, affords an opportunity for captive broodstocks to produce large numbers of juveniles in a single generation for supplementation of natural populations. The captive broodstocks discussed in this report were intended to protect the last known remnants of this stock: sockeye salmon that return to Redfish Lake in the Sawtooth Basin of Idaho at the headwaters of the Salmon River. This report addresses NMFS research from January to December 1994 on the Redfish Lake sockeye salmon captive broodstock program and summarizes results since the beginning of the study in 1991. Spawn from NMFS Redfish Lake sockeye salmon captive broodstocks is being returned to Idaho to aid recovery efforts for the species

  18. Redfish Lake Sockeye Salmon Captive Broodstock Rearing and Research, 1994 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Flagg, Thomas A.

    1996-03-01

    The National Marine Fisheries Service (NMFS) Northwest Fisheries Science Center, in cooperation with the Idaho Department of Fish and Game (IDFG) and the Bonneville Power Administration, has established captive broodstocks to aid recovery of Snake River sockeye salmon (Oncorhynchus nerka) listed as endangered under the US Endangered Species Act (ESA). Captive broodstock programs are emerging as an important component of restoration efforts for ESA-listed salmon populations. Captive broodstock programs are a form of artificial propagation. However, they differ from standard hatchery techniques in one important respect: fish are cultured in captivity for the entire life cycle. The high fecundity of Pacific salmon, coupled with their potentially high survival in protective culture, affords an opportunity for captive broodstocks to produce large numbers of juveniles in a single generation for supplementation of natural populations. The captive broodstocks discussed in this report were intended to protect the last known remnants of this stock: sockeye salmon that return to Redfish Lake in the Sawtooth Basin of Idaho at the headwaters of the Salmon River. This report addresses NMFS research from January to December 1994 on the Redfish Lake sockeye salmon captive broodstock program and summarizes results since the beginning of the study in 1991. Spawn from NMFS Redfish Lake sockeye salmon captive broodstocks is being returned to Idaho to aid recovery efforts for the species.

  19. The social and ecological integration of captive-raised adolescent male African elephants (Loxodonta africana into a wild population.

    Directory of Open Access Journals (Sweden)

    Kate Evans

    Full Text Available BACKGROUND: A rapid rise in the number of captive African elephants (Loxodonta africana used in the tourism industry in southern Africa and orphaned elephants in human care has led to concerns about their long-term management, particularly males. One solution is to release them into the wild at adolescence, when young males naturally leave their herd. However, this raises significant welfare concerns: little is known about how well released elephants integrate into wild populations and whether they pose a greater threat to humans than wild elephants. We document the release of three captive-raised adolescent male African elephants in the Okavango Delta, Botswana. METHODOLOGY/PRINCIPAL FINDINGS: Despite having been part of a herd of working elephants for at least eight years, the three males progressively integrated into the complex fission-fusion society of wild bull elephants. In the three years following release, they showed no tendency to be closer to human habitation, and there were no significant differences between wild and captive-raised adolescent males in the total number of social interactions, size of ranges and habitat use. However, the captive-raised elephants sparred less and vocalised more, and spent more time alone and in smaller social groups. Thereafter the released elephants continued to expand their ranges and interact with both mixed-sex herds and males. One male was shot by farmers 94 months after release, along with ten wild elephants, on a ranch outside the protected area. CONCLUSIONS/SIGNIFICANCE: We show that captive-raised adolescent male elephants can integrate into a wild population. Long-term studies are required to determine the longevity, breeding success, and eventual fate of released male elephants, but we identified no significant short-term welfare problems for the released elephants or recipient population. Release of captive-raised mammals with complex social systems is a husbandry option that should be

  20. Chest Seal Placement for Penetrating Chest Wounds by Prehospital Ground Forces in Afghanistan.

    Science.gov (United States)

    Schauer, Steven G; April, Michael D; Naylor, Jason F; Simon, Erica M; Fisher, Andrew D; Cunningham, Cord W; Morissette, Daniel M; Fernandez, Jessie Renee D; Ryan, Kathy L

    Thoracic trauma represents 5% of all battlefield injuries. Communicating pneumothoraces resulting in tension physiology remain an important etiology of prehospital mortality. In addressing penetrating chest trauma, current Tactical Combat Casualty Care (TCCC) guidelines advocate the immediate placement of a vented chest seal device. Although the Committee on TCCC (CoTCCC) has approved numerous chest seal devices for battlefield use, few data exist regarding their use in a combat zone setting. To evaluate adherence to TCCC guidelines for chest seal placement among personnel deployed to Afghanistan. We obtained data from the Prehospital Trauma Registry (PHTR). Joint Trauma System personnel linked patients to the Department of Defense Trauma Registry, when available, for outcome data upon reaching a fixed facility. In the PHTR, we identified 62 patients with documented gunshot wound (GSW) or puncture wound trauma to the chest. The majority (74.2%; n = 46) of these were due to GSW, with the remainder either explosive-based puncture wounds (22.6%; n = 14) or a combination of GSW and explosive (3.2%; n = 2). Of the 62 casualties with documented GSW or puncture wounds, 46 (74.2%) underwent chest seal placement. Higher proportions of patients with medical officers in their chain of care underwent chest seal placement than those that did not (63.0% versus 37.0%). The majority of chest seals placed were not vented. Of patients with a GSW or puncture wound to the chest, 74.2% underwent chest seal placement. Most of the chest seals placed were not vented in accordance with guidelines, despite the guideline update midway through the study period. These data suggest the need to improve predeployment training on TCCC guidelines and matching of the Army logistical supply chain to the devices recommended by the CoTCCC. 2017.

  1. Reactor vessel sealing plug

    International Nuclear Information System (INIS)

    Dooley, R.A.

    1986-01-01

    This invention relates to an apparatus and method for sealing the cold leg nozzles of a nuclear reactor pressure vessel from a remote location during maintenance and inspection of associated steam generators and pumps while the pressure vessel and refueling canal are filled with water. The apparatus includes a sealing plug for mechanically sealing the cold leg nozzle from the inside of a reactor pressure vessel. The sealing plugs include a primary and a secondary O-ring. An installation tool is suspended within the reactor vessel and carries the sealing plug. The tool telescopes to insert the sealing plug within the cold leg nozzle, and to subsequently remove the plug. Hydraulic means are used to activate the sealing plug, and support means serve to suspend the installation tool within the reactor vessel during installation and removal of the sealing plug

  2. High pressure shaft seal

    International Nuclear Information System (INIS)

    Martinson, A.R.; Rogers, V.D.

    1980-01-01

    In relation to reactor primary coolant pumps, mechanical seal assembly for a pump shaft is disclosed which features a rotating seal ring mounting system which utilizes a rigid support ring loaded through narrow annular projections in combination with centering non-sealing O-rings which effectively isolate the rotating seal ring from temperature and pressure transients while securely positioning the ring to adjacent parts. A stationary seal ring mounting configuration allows the stationary seal ring freedom of motion to follow shaft axial movement up to 3/4 of an inch and shaft tilt about the pump axis without any change in the hydraulic or pressure loading on the stationary seal ring or its carrier. (author)

  3. Does the seal licensing system in Scotland have a negative impact on seal welfare?

    Directory of Open Access Journals (Sweden)

    Laetitia Nunny

    2016-08-01

    Full Text Available This study examined the licensing system that permits seal shooting in Scotland, which was established under Part 6 Conservation of Seals of the Marine (Scotland Act 2010. Four approaches were used: data were collated and analyzed from both the Scottish Government and Scottish Marine Animal Stranding Scheme; a survey was sent to current license holders and informal interviews were conducted with key stakeholder types. Between February 2011 and the end of October 2015, 1229 gray seals and 275 common seals were reported shot under license to the Scottish Government. The numbers of seals reported as shot has reduced year-on-year since the licensing system was put in place. While some license holders, notably fish farms, were using some non-lethal forms of deterrent to reduce seal-related damage, these were often used alongside seal shooting. Of the seals reported as shot to the Scottish Government, only a small percentage were also reported to the Scottish Marine Animal Stranding Scheme, despite this being a licensing requirement. Only 2.3% of the shot gray seals and 4.5% of the shot common seals were necropsied. There is evidence from these necropsies that some seals had not died instantly or had not been shot in the manner recommended by the Scottish Seal Management Code of Practice. These preliminary results show that more carcasses need to be recovered and necropsied if the welfare implications of current seal shooting practice are to be properly assessed. The current legislation does not specify closed seasons to protect breeding seals and thirty-five per cent of necropsied seals were pregnant gray seals. Seals have also been shot during their lactation periods when pups are dependent on their mothers. This raises significant welfare concerns. The re-introduction of closed seasons specific to each species of seal is recommended along with greater effort to deploy non-lethal methods. Independent assessment of the number of seals being killed

  4. The transaction costs driving captive power generation: Evidence from India

    International Nuclear Information System (INIS)

    Ghosh, Ranjan; Kathuria, Vinish

    2014-01-01

    The 2003 Indian Electricity Act incentivizes captive power production through open access in an attempt to harness all sources of generation. Yet, we observe that only some firms self-generate while others do not. In this paper we give a transaction cost explanation for such divergent behavior. Using a primary survey of 107 firms from India, we construct a distinct variable to measure the transaction-specificity of electricity use. The ‘make or buy’ decision is then econometrically tested using probit model. Results are highly responsive to transaction-specificity and the likelihood of captive power generation is positively related to it. At the industrial level, this explains why food and chemical firms are more likely to make their own electricity. Since the burden of poor grid supply is highest on smaller sized and high transaction-specific firms, the grid access policies need to account for firm-level characteristics if government wants to incentivize captive power generation. - Highlights: • We analyze why some firms opt for captive power generation while others do not. • We examine the role of transaction costs in this decision making using probit model. • Unique data from a primary survey of manufacturing firms in Andhra Pradesh, India. • Transaction-specificity significantly determines who installs captive power plant (CPP). • Firm-level characteristics crucial in policies incentivizing captive generation

  5. SSME Seal Test Program: Test results for sawtooth pattern damper seal

    Science.gov (United States)

    Childs, D. W.

    1986-01-01

    Direct and transverse force coefficients for 11, sawtooth-pattern, and damper-seal configurations were examined. The designation damper seal uses a deliberately roughened stator and smooth rotor to increase the net damping force developed by a seal. The designation sawtooth-pattern refers to a stator roughness pattern. The sawtooth pattern yields axial grooves in the stator which are interrupted by spacer elements which act as flow constrictions or dams. All seals use the same smooth rotor and have the same, constant, minimum clearance. The stators examined the consequences of changes in the following design parameters: (1) axial-groove depth; (2) number of teeth: (3) number of sawtooth sections; (4) number of spacer elements; (5) dam width; (6) axially aligned sawtooth sections versus axially-staggered sawtooth sections; and (7) groove geometry. It is found that none of the sawtooth-pattern seal performs as well as the best round-hole-pattern seal. Maximum damping configurations for the sawtooth and round-hole-pattern stators have comparable stiffness performance. Several of the sawtooth pattern stators outperformed the best round-hole pattern seal.

  6. Circumferential shaft seal

    Science.gov (United States)

    Ludwig, L. P. (Inventor)

    1981-01-01

    A circumferential shaft seal comprising two sealing rings held to a rotating shaft by means of a surrounding elastomeric band is disclosed. The rings are segmented and are of a rigid sealing material such as carbon or a polyimide and graphite fiber composite.

  7. Microbiological evaluation of different strategies for management of snakes in captivity.

    Science.gov (United States)

    Campagner, M V; Bosco, S M G; Bagagli, E; Cunha, M L R S; Jeronimo, B C; Saad, E; Biscola, N P; Ferreira, R S; Barraviera, B

    2012-01-01

    Keeping snakes in captivity to produce venom for scientific research and production of inputs is now a worldwide practice. Maintaining snakes in captivity involves capture, infrastructure investments, management techniques, and appropriate qualified personnel. Further, the success of the project requires knowledge of habitat, nutrition, and reproduction, and control of opportunistic infections. This study evaluated the management of snakes in three types of captivity (quarantine, intensive, and semiextensive) and diagnosed bacterial and fungal contaminants. A bacteriological profile was obtained by swabbing the oral and cloacal cavities, scales, and venoms of healthy adult snakes from Bothrops jararaca (Bj) and Crotalus durissus terrificus (Cdt). There was predominance of Enterobacteriaceae, especially non-fermenting Gram-negative bacilli excluding Pseudomonas spp and Gram- positive bacteria. Statistically, intensive captivity resulted in the highest number of bacterial isolates, followed by recent capture (quarantine) and by semiextensive captivity. No statistical difference was found between Bj and Cdt bacterial frequency. In vitro bacterial susceptibility testing found the highest resistance against the semisynthetic penicillins (amoxicillin and ampicillin) and highest sensitivity to amicacin and tobramycin aminoglycosides. To evaluate mycological profile of snakes from intensive captivity, samples were obtained from two healthy Bj and one B. moojeni, one B. pauloensis, and one Cdt showing whitish lesions on the scales suggestive of ringworm. Using conventional methods and DNA-based molecular procedures, five samples of Trichosporon asahii were identified. Despite the traditional role of intense captivity in ophidian venom production, semiextensive captivity was more effective in the present study by virtue of presenting superior control of bacterial and fungal transmission, easier management, lowest cost, and decreased rate of mortality; therefore, it should be

  8. Sealing arrangement for radioactive material

    International Nuclear Information System (INIS)

    Gray, I.L.S.; Sievwright, R.W.T.; Elliott, J.C.

    1993-01-01

    A sealing arrangement for hermetically sealing two mating surfaces comprises two seals arranged to lie between the surfaces. Each seal provides hermetic sealing over a respective different temperature range and lie serially along the surfaces between the regions to be isolated. A main seal integrity test arrangement is provided in the form of a port and passage. This allows for the introduction of a fluid into or the evacuation of a region between the two seals to detect a leak. The port is also provided with at least two test port seals which seal with a plug. The plug is also provided with a test port to allow the integrity of the test port seal to be tested. (UK)

  9. Severe service sealing solutions

    International Nuclear Information System (INIS)

    Metcalfe, R.; Wensel, R.

    1994-09-01

    Successful sealing usually requires much more than initial leak-tightness. Friction and wear must also be acceptable, requiring a good understanding of tribology at the sealing interface. This paper describes various sealing solutions for severe service conditions. The CAN2A and CAN8 rotary face seals use tungsten carbide against carbon-graphite to achieve low leakage and long lifetime in nuclear main coolant pumps. The smaller CAN6 seal successfully uses tungsten carbide against silicon carbide in reactor water cleanup pump service. Where friction in CANDU fuelling machine rams must be essentially zero, a hydrostatic seal using two silicon carbide faces is the solution. In the NRU reactor moderator pumps, where pressure is much lower, eccentric seals that prevent boiling at the seal faces are giving excellent service. All these rotary face seals rely on supplementary elastomer seals between their parts. An integrated engineering approach to high performance sealing with O-rings is described. This is epitomized in critical Space Shuttle applications, but is increasingly being applied in CANDU plants. It includes gland design, selection and qualification of material, quality assurance, detection of defects and the effects of lubrication, surface finish, squeeze, stretch and volume constraints. In conclusion, for the severe service applications described, customized solutions have more than paid for themselves by higher reliability, lower maintenance requirements and reduced outage time. (author)

  10. Comparative skull analysis suggests species-specific captivity-related malformation in lions (Panthera leo).

    Science.gov (United States)

    Saragusty, Joseph; Shavit-Meyrav, Anat; Yamaguchi, Nobuyuki; Nadler, Rona; Bdolah-Abram, Tali; Gibeon, Laura; Hildebrandt, Thomas B; Shamir, Merav H

    2014-01-01

    Lion (Panthera leo) populations have dramatically decreased worldwide with a surviving population estimated at 32,000 across the African savannah. Lions have been kept in captivity for centuries and, although they reproduce well, high rates of stillbirths as well as morbidity and mortality of neonate and young lions are reported. Many of these cases are associated with bone malformations, including foramen magnum (FM) stenosis and thickened tentorium cerebelli. The precise causes of these malformations and whether they are unique to captive lions remain unclear. To test whether captivity is associated with FM stenosis, we evaluated 575 lion skulls of wild (N = 512) and captive (N = 63) origin. Tiger skulls (N = 276; 56 captive, 220 wild) were measured for comparison. While no differences were found between males and females or between subadults and adults in FM height (FMH), FMH of captive lions (17.36±3.20 mm) was significantly smaller and with greater variability when compared to that in wild lions (19.77±2.11 mm). There was no difference between wild (18.47±1.26 mm) and captive (18.56±1.64 mm) tigers in FMH. Birth origin (wild vs. captive) as a factor for FMH remained significant in lions even after controlling for age and sex. Whereas only 20/473 wild lions (4.2%) had FMH equal to or smaller than the 5th percentile of the wild population (16.60 mm), this was evident in 40.4% (23/57) of captive lion skulls. Similar comparison for tigers found no differences between the captive and wild populations. Lions with FMH equal to or smaller than the 5th percentile had wider skulls with smaller cranial volume. Cranial volume remained smaller in both male and female captive lions when controlled for skull size. These findings suggest species- and captivity-related predisposition for the pathology in lions.

  11. Comparative skull analysis suggests species-specific captivity-related malformation in lions (Panthera leo.

    Directory of Open Access Journals (Sweden)

    Joseph Saragusty

    Full Text Available Lion (Panthera leo populations have dramatically decreased worldwide with a surviving population estimated at 32,000 across the African savannah. Lions have been kept in captivity for centuries and, although they reproduce well, high rates of stillbirths as well as morbidity and mortality of neonate and young lions are reported. Many of these cases are associated with bone malformations, including foramen magnum (FM stenosis and thickened tentorium cerebelli. The precise causes of these malformations and whether they are unique to captive lions remain unclear. To test whether captivity is associated with FM stenosis, we evaluated 575 lion skulls of wild (N = 512 and captive (N = 63 origin. Tiger skulls (N = 276; 56 captive, 220 wild were measured for comparison. While no differences were found between males and females or between subadults and adults in FM height (FMH, FMH of captive lions (17.36±3.20 mm was significantly smaller and with greater variability when compared to that in wild lions (19.77±2.11 mm. There was no difference between wild (18.47±1.26 mm and captive (18.56±1.64 mm tigers in FMH. Birth origin (wild vs. captive as a factor for FMH remained significant in lions even after controlling for age and sex. Whereas only 20/473 wild lions (4.2% had FMH equal to or smaller than the 5th percentile of the wild population (16.60 mm, this was evident in 40.4% (23/57 of captive lion skulls. Similar comparison for tigers found no differences between the captive and wild populations. Lions with FMH equal to or smaller than the 5th percentile had wider skulls with smaller cranial volume. Cranial volume remained smaller in both male and female captive lions when controlled for skull size. These findings suggest species- and captivity-related predisposition for the pathology in lions.

  12. Research on seal control systems for international nuclear safeguard and the vulnerability assessment on the seals

    International Nuclear Information System (INIS)

    Zhang Hongjian; Liu Tianshu; Cao Fangfang; Xu Chunyan

    2014-01-01

    Safeguard seals, also called Tamper-indicating devices (TIDs), are widely used to detect tampering or unauthorized entry in the international safeguard and security systems, Seal control systems consist of seal implementing plan, seal development and the vulnerability assessment on tbe seals, effective implementing procedures and methods of the seals. The vulnerability assessment contents of safeguard seals, thermo-shrinked film seals being as an example, and seals control systems in the implementation program are researched. The seal control systems discuss task assignment, seals management flow and seals program data flow to promote applying effectively seals. The vulnerability assessment program of seals studies assurance level to some different tampering techniques and measures. The researches must promote utilizing seals effectively for nuclear security, non-proliferation of nuclear weapons, radioactive waste management, and the nuclear material accounting and control. (authors)

  13. The IRES electronic seal

    International Nuclear Information System (INIS)

    Gourlez, P.; Funk, P.; Brochard, D.; Moreau, J.F.; Martin, J.C.

    2001-01-01

    In the framework of the French Support Program for the IAEA Safeguards, the 'Institut de Protection et de Surete Nucleaire' (IPSN), developed an electronic seal called Integrated and Reusable Electronic Seal (IRES) that enables independent verification by different inspectorates (IAEA, Euratom, and National Inspectorate) Furthermore, a bilateral co-ordination between Euratom and French domestic safeguards takes place in some French facilities regarding a common approach concerning the seals especially in case of crisis situation. The seal can be remotely interrogated by radio frequency and integrated to other Containment/surveillance systems by serial line RS 485. Data are authenticated and the IRESMAG software manages in the seal reader all functionalities of the seal and records inspection data compatible with the IAEA's Seal Database

  14. Cover-gas-seal component development: dynamic inflatable-plug seal improvement

    International Nuclear Information System (INIS)

    Horton, P.H.

    1977-01-01

    This report documents the 1) radial compliance and 2) low friction coating tests conducted on the CRBRP Rotating Plug Inflatable Seals per test plan N707TR810014. Test results show that narrowing the seal blade from 0.25 to 0.12 in. will effectively reduce dynamic drag from 30 to 20 lb/ft under nominal conditions and will increase seal radial compliance from 0.12 to 0.30 in. without an unacceptable rise in dynamic drag. Tests also demonstrated that application of a teflon coating to the seal wear surface reduced breakaway drag by 25% based on results of comparison dwells

  15. Effect of bar sealing parameters on OPP/MCPP heat seal strength

    Directory of Open Access Journals (Sweden)

    2007-11-01

    Full Text Available The effect of bar sealing parameters on the heat seal strength of oriented polypropylene (OPP/metallic cast polypropylene (MCPP laminate film was investigated. Based on the results obtained from the parametric study, a bar sealing process window was developed. All points drop within the process window are combinations of platen temperature and dwell time that produce acceptable heat seal. Optimum combinations are indicated by the lower border of the window. The plateau initiation temperature, Tpi of OPP/MCPP laminate film used in the present study occurred before the final melting temperature, Tmf of the sealant material. The highest achievable heat seal strength was at the plateau region, and the corresponding failure modes were delaminating, tearing or combine failure modes (delaminating and tearing. Minimum pressure level of 1.25 bars is necessary to bring the laminate interface into intimate contact in order to effect sealing.

  16. Comparative study on two different seal surface structure for reactor pressure vessel sealing behavior

    International Nuclear Information System (INIS)

    Chen Jun; Xiong Guangming; Deng Xiaoyun

    2014-01-01

    The seal surface structure is very important to reactor pressure vessel (RPV) sealing behavior. In this paper, two 3-D RPV sealing analysis finite models have been established with different seal surface structures, in order to study the influence of two structures. The separation of RPV upper and lower flanges, bolt loads and etc. are obtained, which are used to evaluate the sealing behavior of the RPV. Meanwhile, the comparative analysis of safety margin of two seal surface structural had been done, which provides the theoretical basis for RPV seal structure design optimization. (authors)

  17. TB in Captive Elephants

    Centers for Disease Control (CDC) Podcasts

    2017-04-27

    Dr. Barry Kreiswirth, founding director of the Public Health Research Institute, TB Center, at Rutgers University, discusses TB in three captive elephants.  Created: 4/27/2017 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 4/27/2017.

  18. Seals in motion

    NARCIS (Netherlands)

    Brasseur, Sophie Marie Jacqueline Michelle

    2017-01-01

    The harbour seal Phoca vitulina and the grey seal Halichoerus grypus have been inhabitants of the Wadden Sea since millennia. Prehistoric findings indicate the presence of both species around 5000 BC. This changed dramatically in the mid Middle-Ages as around 1500 AC, the grey seal disappeared from

  19. Coherent captivity of population in gas of excited atoms

    International Nuclear Information System (INIS)

    Anisimov, P.M.; Akhmedzhanov, R.A.; Zelenskij, I.V.; Kolesov, R.L.; Kuznetsova, E.A.

    2003-01-01

    The coherent captivity of the population in the gaseous discharge on the transitions between the neon atoms excited levels is studied. The resonances, corresponding to the origination of the population coherent captivity in the Λ- and V-schemes on the Zeeman sublevels of the low and upper working states, were observed in the presence of the longitudinal magnetic field. The effect of the nonlinear rotation of the polarization plane under the conditions of the population coherent captivity was studied. The possibility of applying the results of the work for the diagnostics of the local magnetic fields and other plasma parameters in the gaseous discharges is considered [ru

  20. Periodicals оn the Fate of Russian Captives During the First World War

    Directory of Open Access Journals (Sweden)

    Nazarova Tatyana

    2014-11-01

    Full Text Available The materials of periodicals represent an important source for studying public opinion and the executive policy regarding the fate of Russian captives. The analysis of the periodicals proves that despite the patriotic fervor that swept the press during the First World War, the plight of Russian captives was not widely highlighted. The article analyzes the nature of the publications on the Russian captives and identifies the reasons of journalists’ neglect of their problems. Among these reasons, the author calls an unprecedented scale of captivity – the millions of war prisoners from each warring sides. The government and their controlled press tried to forget the captives instead of analyzing the causes of mass captivity and correcting the command errors. The theme of captivity was not a separate issue in the national press, and it was used only as the material for the formation of the “image of enemy” to illustrate the violations of the international humanistic principles by the Germans. This was largely due to the attitude of the government and the military toward their captives – they were treated like traitors, they were blamed for the failures that have dogged the Russian army in the first years of the war.

  1. Nature versus nurture? Consequences of short captivity in early stages.

    Science.gov (United States)

    Horreo, Jose L; Valiente, America G; Ardura, Alba; Blanco, Aida; Garcia-Gonzalez, Claudia; Garcia-Vazquez, Eva

    2018-01-01

    Biological changes occurring as a consequence of domestication and/or captivity are not still deeply known. In Atlantic salmon (S almo salar ), endangered (Southern Europe) populations are enhanced by supportive breeding, which involves only 6 months of captive rearing following artificial spawning of wild-collected adults. In this work, we assess whether several fitness-correlated life-history traits (migratory behavior, straying rate, age at maturity, and growth) are affected by early exposure to the captive environment within a generation, before reproduction thus before genetic selection. Results showed significant differences in growth and migratory behavior (including straying), associated with this very short period of captivity in natural fish populations, changing even genetic variability (decreased in hatchery-reared adults) and the native population structure within and between rivers of the species. These changes appeared within a single generation, suggesting very short time of captivity is enough for initiating changes normally attributed to domestication. These results may have potential implications for the long-term population stability/viability of species subjected to restoration and enhancement processes and could be also considered for the management of zoo populations.

  2. Captivate Your Audience by Turning Powerpoint Presentations into Interactive E-Learning Content

    Science.gov (United States)

    Young, Montessa; Hirnyck, Ronda; Agenbroad, Ariel; Bechinski, Edward J.

    2015-01-01

    Adobe® Captivate software provides educators with a tool to create interactive distance learning modules. This article describes how Adobe® Captivate was used to increase engagement of volunteer learners. An Adobe® Captivate module was created for the University of Idaho Master Gardener program to educate and test new Master Gardener volunteers on…

  3. Design and development of face seal type sealing plug for advanced heavy water reactor

    International Nuclear Information System (INIS)

    Bansal, S.; Bhattacharyya, S.; Patel, R.J.; Agrawal, R.G.; Vaze, K.K.

    2005-09-01

    Advanced Heavy Water Reactor is a vertical pressure tube type reactor having light water as its coolant and heavy water as moderator. Sealing plug is required to close the pressure boundary of main heat transport system of the reactor by preventing escape of light water/steam From the coolant channel. There are 452 coolant channels in the reactor located in square lattice pitch. Sealing plug is located at the top of each coolant channel (in the top end fitting). Top end fitting is having a stepped bore to create a sealing face. Sealing plug is held through its expanded jaws in a specially provided groove of the end fitting. The plug was designed and prototypes were manufactured considering its functional importance, intricate design and precision machining requirements. Sealing plug consists of about 20 components mostly made up of precipitation hardening stainless steel, which is suitable for water environment and meets other requirements of strength and resistance to wear and galling. Seal disc is a critical component of the sealing plug as it is the pressure-retaining component. It is a circular disc with protruded stem. One face of the seal disc is nickel plated in the peripheral area that creates the sealing by abutting against the sealing face provided in the end fitting. The typical shape and profile of seal disc provides flexibility and allows elastic deformation to assist in locking of sealing plug and creating adequate seating force for effective sealing. Design and development aspects of the sealing plug have been detailed out in this report. Also results of stress analysis and experimental studies for seal disc have been mentioned in the report. Stress analysis and experimental testing was required for the seal disc because high stresses are developed due to its exposure to high pressure and temperature environment of Main Heat Transport system. Hot testing was carried out to simulate the reactor-simulated condition. The performance was found to be

  4. Genetic characterization of Strongyloides spp. from captive, semi-captive and wild Bornean orangutans (Pongo pygmaeus) in Central and East Kalimantan, Borneo, Indonesia.

    Science.gov (United States)

    Labes, E M; Nurcahyo, W; Wijayanti, N; Deplazes, P; Mathis, A

    2011-09-01

    Orangutans (Pongo spp.), Asia's only great apes, are threatened in their survival due to habitat loss, hunting and infections. Nematodes of the genus Strongyloides may represent a severe cause of death in wild and captive individuals. In order to better understand which Strongyloides species/subspecies infect orangutans under different conditions, larvae were isolated from fecal material collected in Indonesia from 9 captive, 2 semi-captive and 9 wild individuals, 18 captive groups of Bornean orangutans and from 1 human working with wild orangutans. Genotyping was done at the genomic rDNA locus (part of the 18S rRNA gene and internal transcribed spacer 1, ITS1) by sequencing amplicons. Thirty isolates, including the one from the human, could be identified as S. fuelleborni fuelleborni with 18S rRNA gene identities of 98·5-100%, with a corresponding published sequence. The ITS1 sequences could be determined for 17 of these isolates revealing a huge variability and 2 main clusters without obvious pattern with regard to attributes of the hosts. The ITS1 amplicons of 2 isolates were cloned and sequenced, revealing considerable variability indicative of mixed infections. One isolate from a captive individual was identified as S. stercoralis (18S rRNA) and showed 99% identity (ITS1) with S. stercoralis sequences from geographically distinct locations and host species. The findings are significant with regard to the zoonotic nature of these parasites and might contribute to the conservation of remaining orangutan populations.

  5. Cover gas seals. 11 - FFTF-LMFBR seal-test program, January-March 1974

    International Nuclear Information System (INIS)

    Kurzeka, W.; Oliva, R.; Welch, F.

    1974-01-01

    The objectives of this program are to: (1) conduct static and dynamic tests to demonstrate or determine the mechanical performance of full-size (cross section) FFTF fuel transfer machine and reactor vessel head seals intended for use in a sodium vapor - inert gas environment, (2) demonstrate that these FFTF seals or new seal configuration provide acceptable fission product and cover gas retention capabilities at LMFBR Clinch River Plant operating environmental conditions other than radiation, and (3) develop improved seals and seal technology for the LMFBR Clinch River Plant to support the national objective to reduce all atmospheric contaminations to low levels

  6. Seals Research at AlliedSignal

    Science.gov (United States)

    Ullah, M. Rifat

    1996-01-01

    A consortium has been formed to address seal problems in the Aerospace sector of Allied Signal, Inc. The consortium is represented by makers of Propulsion Engines, Auxiliary Power Units, Gas Turbine Starters, etc. The goal is to improve Face Seal reliability, since Face Seals have become reliability drivers in many of our product lines. Several research programs are being implemented simultaneously this year. They include: Face Seal Modeling and Analysis Methodology; Oil Cooling of Seals; Seal Tracking Dynamics; Coking Formation & Prevention; and Seal Reliability Methods.

  7. Redfish Lake Sockeye Salmon Captive Broodstock Rearing and Research, 1995-2000 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Flagg, Thomas A.

    2001-01-01

    The National Marine Fisheries Service (NMFS) Northwest Fisheries Science Center, in cooperation with the Idaho Department of Fish and Game and the Bonneville Power Administration, has established captive broodstocks to aid recovery of Snake River sockeye salmon (Oncorhynchus nerka) listed as endangered under the US Endangered Species Act (ESA). Captive broodstock programs are a form of artificial propagation and are emerging as an important component of restoration efforts for ESA-listed salmon populations. However, they differ from standard hatchery techniques in one important respect: fish are cultured in captivity for the entire life cycle. The high fecundity of Pacific salmon, coupled with their potentially high survival in protective culture, affords an opportunity for captive broodstocks to produce large numbers of juveniles in a single generation for supplementation of natural populations. The captive broodstocks discussed in this report were intended to protect the last known remnants of this stock: sockeye salmon that return to Redfish Lake in the Sawtooth Basin of Idaho at the headwaters of the Salmon River. This report addresses NMFS research from January 1995 to August 2000 on the Redfish Lake sockeye salmon captive broodstock program and summarizes results since the beginning of the study in 1991. Since initiating captive brood culture in 1991, NMFS has returned 742,000 eyed eggs, 181 pre-spawning adults, and over 90,000 smolts to Idaho for recovery efforts. The first adult returns to the Stanley Basin from the captive brood program began with 7 in 1999, and increased to about 250 in 2000. NMFS currently has broodstock in culture from year classes 1996, 1997, 1998, and 1999 in both the captive broodstock program, and an adult release program. Spawn from NMFS Redfish Lake sockeye salmon captive broodstocks is being returned to Idaho to aid recovery efforts for the species.

  8. Brush seal performance measurement system

    OpenAIRE

    Aksoy, Serdar; Akşit, Mahmut Faruk; Aksit, Mahmut Faruk; Duran, Ertuğrul Tolga; Duran, Ertugrul Tolga

    2009-01-01

    Brush seals are rapidly replacing conventional labyrinth seals in turbomachinery applications. Upon pressure application, seal stiffness increases drastically due to frictional bristle interlocking. Operating stiffness is critical to determine seal wear life. Typically, seal stiffness is measured by pressing a curved shoe to brush bore. The static-unpressurized measurement is extrapolated to pressurized and high speed operating conditions. This work presents a seal stiffness measurement syste...

  9. Seals

    International Nuclear Information System (INIS)

    Welsher, R.A.G.

    1982-01-01

    An aperture through a biological shield is sealed by a flexible sheath having a beading at one end located on an annular member slidable in the aperture such that the beading bears in sealing engagement against the sides of the aperture. The annular member is retained by a retractable latch and can be rejected by pushing it out of the aperture using a replacement annular member with a replacement sheath thereon to butt against the annular member to be rejected. The replacement annular member may be mounted on a tubular device having an outer co-axial member for operating the latch when the replacement annular member butts against the annular member to be rejected. Applications include effecting a seal between a remote handling equipment and a wall through which the equipment extends. (author)

  10. Reintroduction of captive-bred African Grass-Owls Tyto capensis ...

    African Journals Online (AJOL)

    This study represents the first attempt to determine post-release survival of a captive-bred owl in Africa. We released six captive-bred African Grass-Owls Tyto capensis into suitable habitat and, using radio telemetry, determined their daytime roost sites. One bird left the study area soon after release and did not yield data.

  11. Electronic seal

    International Nuclear Information System (INIS)

    Musyck, E.

    1981-01-01

    An electronic seal is presented for a volume such as container for fissile materials. The seal encloses a lock for barring the space as well as a device for the detection and the recording of the intervention of the lock. (AF)

  12. A modified captive bubble method for determining advancing and receding contact angles

    International Nuclear Information System (INIS)

    Xue, Jian; Shi, Pan; Zhu, Lin; Ding, Jianfu; Chen, Qingmin; Wang, Qingjun

    2014-01-01

    Graphical abstract: - Highlights: • A modified captive bubble method for determining advancing and receding contact angle is proposed. • We have designed a pressure chamber with a pressure control system to the original experimental. • The modified method overcomes the deviation of the bubble in the traditional captive bubble method. • The modified captive bubble method allows a smaller error from the test. - Abstract: In this work, a modification to the captive bubble method was proposed to test the advancing and receding contact angle. This modification is done by adding a pressure chamber with a pressure control system to the original experimental system equipped with an optical angle mater equipped with a high speed CCD camera, a temperature control system and a computer. A series of samples with highly hydrophilic, hydrophilic, hydrophobic and superhydrophobic surfaces were prepared. The advancing and receding contact angles of these samples with highly hydrophilic, hydrophilic, and hydrophobic surfaces through the new methods was comparable to the result tested by the traditional sessile drop method. It is proved that this method overcomes the limitation of the traditional captive bubble method and the modified captive bubble method allows a smaller error from the test. However, due to the nature of the captive bubble technique, this method is also only suitable for testing the surface with advancing or receding contact angle below 130°

  13. A modified captive bubble method for determining advancing and receding contact angles

    Energy Technology Data Exchange (ETDEWEB)

    Xue, Jian; Shi, Pan; Zhu, Lin [Key Laboratory of High Performance Polymer Materials and Technology (Nanjing University), Ministry of Eduction, Nanjing 210093 (China); Ding, Jianfu [Security and Disruptive Technologies, National Research Council Canada, 1200 Montreal Road, Ottawa, K1A 0R6, Ontario (Canada); Chen, Qingmin [Key Laboratory of High Performance Polymer Materials and Technology (Nanjing University), Ministry of Eduction, Nanjing 210093 (China); Wang, Qingjun, E-mail: njuwqj@nju.edu.cn [Key Laboratory of High Performance Polymer Materials and Technology (Nanjing University), Ministry of Eduction, Nanjing 210093 (China)

    2014-03-01

    Graphical abstract: - Highlights: • A modified captive bubble method for determining advancing and receding contact angle is proposed. • We have designed a pressure chamber with a pressure control system to the original experimental. • The modified method overcomes the deviation of the bubble in the traditional captive bubble method. • The modified captive bubble method allows a smaller error from the test. - Abstract: In this work, a modification to the captive bubble method was proposed to test the advancing and receding contact angle. This modification is done by adding a pressure chamber with a pressure control system to the original experimental system equipped with an optical angle mater equipped with a high speed CCD camera, a temperature control system and a computer. A series of samples with highly hydrophilic, hydrophilic, hydrophobic and superhydrophobic surfaces were prepared. The advancing and receding contact angles of these samples with highly hydrophilic, hydrophilic, and hydrophobic surfaces through the new methods was comparable to the result tested by the traditional sessile drop method. It is proved that this method overcomes the limitation of the traditional captive bubble method and the modified captive bubble method allows a smaller error from the test. However, due to the nature of the captive bubble technique, this method is also only suitable for testing the surface with advancing or receding contact angle below 130°.

  14. Comparison of Serum Protein Electrophoresis Values in Wild and Captive Whooping Cranes ( Grus americana ).

    Science.gov (United States)

    Hausmann, Jennifer C; Cray, Carolyn; Hartup, Barry K

    2015-09-01

    Protein electrophoresis of serum samples from endangered, wild whooping cranes ( Grus americana ) was performed to help assess the health of the only self-sustaining, migratory population in North America. Serum samples from wild adult cranes (n = 22) were taken at Aransas National Wildlife Refuge, Texas, USA during winter. Wild juvenile cranes (n = 26) were sampled at Wood Buffalo National Park, Northwest Territories, Canada, in midsummer. All captive crane samples were acquired from the International Crane Foundation, Baraboo, WI, USA. Captive adult cranes (n = 30) were sampled during annual examinations, and archived serum samples from captive juvenile cranes (n = 19) were selected to match the estimated age of wild juveniles. Wild juveniles had significantly lower concentrations of all protein fractions than wild adults, except for prealbumin and γ globulins. All protein fraction concentrations for wild juveniles were significantly lower compared with captive juveniles, except for prealbumin and γ globulins, which were higher. Wild adults had significantly greater γ globulin concentrations than captive adults. Captive juveniles had significantly lower prealbumin and albumin concentrations and albumin : globulin ratios than captive adults. The higher γ globulin concentrations in wild versus captive cranes are likely because of increased antigenic exposure and immune stimulation. Protein fraction concentrations vary significantly with age and natural history in this species. Reference intervals for serum protein electrophoresis results from captive adult whooping cranes are provided in this study.

  15. The human obesity epidemic, the mismatch paradigm, and our modern "captive" environment.

    Science.gov (United States)

    Power, Michael L

    2012-01-01

    In the distant past obesity in humans was rare and likely caused by metabolic dysregulation due to genetic or disease-related pathology. External factors precluded the ability of most people to overeat or under exert. Socio-cultural obesity came about due to the rareness of obesity and its difficulty to achieve. What is rare becomes valuable and what is difficult to achieve becomes a badge of prestige. The modern human obesity epidemic would appear to represent a third class of obesity: environmental obesity. Much like the captive environments which humans construct for the captive/companion animals in our care, the modern human environment has greatly decreased the challenges of life that would restrict food intake and enforce exertion. And like us, our captive/companion animal populations are also experiencing obesity epidemics. A further concern is that maternal obesity alters maternal signaling to offspring, in utero through the placenta and after birth through breast milk, in ways that perpetuate an enhanced vulnerability to obesity. Molecules such as leptin, produced by adipose tissue and placenta, have significant developmental effects on brain areas associated with feeding behavior. Leptin and other cytokines and growth factors are found in breast milk. These molecules have positive effects on gut maturation; their effects on metabolism and brain development are unclear. Placenta and brain also are hotspots for epigenetic regulation, and epigenetic changes may play significant roles in the later vulnerability to obesity and to the development of a diverse array of diseases, including heart disease, hypertension, and noninsulin-dependent diabetes. Copyright © 2012 Wiley Periodicals, Inc.

  16. Research on Captive Broodstock Programs for Pacific Salmon; Assessment of Captive Broodstock Technologies, Annual Report 2002-2003.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry

    2004-01-01

    The success of captive broodstock programs depends on high in-culture survival, appropriate development of the reproductive system, and the behavior and survival of cultured salmon after release, either as adults or juveniles. Continuing captive broodstock research designed to improve technology is being conducted to cover all major life history stages of Pacific salmon. Current velocity in rearing vessels had little if any effect on reproductive behavior of captively reared steelhead. However, males and females reared in high velocity vessels participated a greater number of spawning events than siblings reared in low velocity tanks. Observations of nesting females and associated males in a natural stream (Hamma Hamma River) were consistent with those observed in a controlled spawning channel. DNA pedigree analyses did not reveal significant differences in the numbers of fry produced by steelhead reared in high and low velocity vessels. To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon are being exposed to known odorants at key developmental stages. Subsequently they will be tested for development of long-term memories of these odorants. In 2002-2003, the efficacy of EOG analysis for assessing imprinting was demonstrated and will be applied in these and other behavioral and molecular tools in the current work plan. Results of these experiments will be important to determine the critical periods for imprinting for the offspring of captively-reared fish destined for release into natal rivers or lakes. By early August, the oocytes of all of Rapid River Hatchery chinook salmon females returning from the ocean had advanced to the tertiary yolk globule stage; whereas, only some of the captively reared Lemhi River females sampled had advanced to this stage, and the degree of advancement was not dependent on rearing temperature. The mean spawning time of captive Lemhi River females was 3-4 weeks after that of the Rapid River fish

  17. A hybrid floating brush seal (HFBS) for improved sealing and wear performance in turbomachinery applications

    Science.gov (United States)

    Lattime, Scott Byran

    A conceptually new type of seal has been developed for gas turbine applications which dramatically reduces wear and leakage associated with current labyrinth and brush seal technologies. The Hybrid Floating Brush Seal (HFBS) combines brush seal and film riding face seal technologies to create a hybrid seal that allows both axial and radial excursions of the sealed shaft, while simultaneously eliminating interface surface speeds (friction and heat) between the rotor and the brush material that characterize standard brush seal technology. A simple test rig was designed to evaluate feasibility of the HFBS under relatively low pressures and rotational speeds (50psig, 5krpm). A second test stand was created to study the effects of centrifugal force on bristle deflection. A third test facility was constructed for prototype development and extensive room temperature testing at moderate pressures and fairly high rotational speeds (100psig, 40krpm). This test rig also allowed the evaluation of the HFBS during axial movement of a rotating shaft. An analytical model to predict the effects of centrifugal force on the bristles of a rotating brush seal was developed. Room temperature analysis of the HFBS proved successful for relatively high operating rotational velocities at moderate pressures with very acceptable leakage rates for gas turbine engines. Brush seals were able to track rotor speeds up to 24krpm while maintaining sealing integrity. The HFBS's ability to function under axial shaft displacement and synchronous dynamic radial loading was also proven successful. Hydrodynamic performance of the face seal was proven to provide adequate stiffness and load carrying capacity to keep the brush seal from contacting the face seal at pressure drops across the brush of up to 100psi. Leakage performance over standard brush seal and labyrinth technology was quite dramatic. The HFBS showed its sealing advantage using much higher radial interference between the rotor and the bristle

  18. Hydrodynamic perception in true seals (Phocidae) and eared seals (Otariidae).

    Science.gov (United States)

    Hanke, Wolf; Wieskotten, Sven; Marshall, Christopher; Dehnhardt, Guido

    2013-06-01

    Pinnipeds, that is true seals (Phocidae), eared seals (Otariidae), and walruses (Odobenidae), possess highly developed vibrissal systems for mechanoreception. They can use their vibrissae to detect and discriminate objects by direct touch. At least in Phocidae and Otariidae, the vibrissae can also be used to detect and analyse water movements. Here, we review what is known about this ability, known as hydrodynamic perception, in pinnipeds. Hydrodynamic perception in pinnipeds developed convergently to the hydrodynamic perception with the lateral line system in fish and the sensory hairs in crustaceans. So far two species of pinnipeds, the harbour seal (Phoca vitulina) representing the Phocidae and the California sea lion (Zalophus californianus) representing the Otariidae, have been studied for their ability to detect local water movements (dipole stimuli) and to follow hydrodynamic trails, that is the water movements left behind by objects that have passed by at an earlier point in time. Both species are highly sensitive to dipole stimuli and can follow hydrodynamic trails accurately. In the individuals tested, California sea lions were clearly more sensitive to dipole stimuli than harbour seals, and harbour seals showed a superior trail following ability as compared to California sea lions. Harbour seals have also been shown to derive additional information from hydrodynamic trails, such as motion direction, size and shape of the object that caused the trail (California sea lions have not yet been tested). The peculiar undulated shape of the harbour seals' vibrissae appears to play a crucial role in trail following, as it suppresses self-generated noise while the animal is swimming.

  19. Thermal characteristics of wild and captive Micronesian Kingfisher nesting habitats

    Science.gov (United States)

    Kesler, Dylan C.; Haig, Susan M.

    2004-01-01

    To provide information for managing the captive population of endangered Guam Micronesian kingfishers (Halcyon cinnamomina cinnamomina), four biologically relevant thermal metrics were compared among captive facilities on the United States mainland and habitats used by wild Micronesian kingfishers on the island of Pohnpei (H. c. reichenbachii), Federated States of Micronesia. Additionally, aviaries where kingfishers laid eggs were compared to those in which birds did not attempt to breed. Compared to aviaries, habitats used by wild Pohnpei kingfishers had 3.2A?C higher daily maximum and minimum temperatures and the proportion of time when temperatures were in the birds' thermoneutral zone was 45% greater. No differences were found in the magnitude of temperature fluctuation in captive and wild environments. In captive environments in which birds bred, daily maximum temperatures were 2.1A?C higher and temperatures were within the thermoneutral zone 25% more often than in the aviaries where the kingfishers did not breed. No differences were found in the magnitude of temperature fluctuation or the daily minimum temperature. Results suggest that the thermal environment has the potential to influence reproduction, and that consideration should be given to increasing temperatures in captive breeding facilities to improve propagation of the endangered Micronesian kingfisher.

  20. Shaft seal assembly and method

    Science.gov (United States)

    Keba, John E. (Inventor)

    2007-01-01

    A pressure-actuated shaft seal assembly and associated method for controlling the flow of fluid adjacent a rotatable shaft are provided. The seal assembly includes one or more seal members that can be adjusted between open and closed positions, for example, according to the rotational speed of the shaft. For example, the seal member can be configured to be adjusted according to a radial pressure differential in a fluid that varies with the rotational speed of the shaft. In addition, in the closed position, each seal member can contact a rotatable member connected to the shaft to form a seal with the rotatable member and prevent fluid from flowing through the assembly. Thus, the seal can be closed at low speeds of operation and opened at high speeds of operation, thereby reducing the heat and wear in the seal assembly while maintaining a sufficient seal during all speeds of operation.

  1. Rotary shaft seal

    International Nuclear Information System (INIS)

    Langebrake, C.O.

    1984-01-01

    The invention is a novel rotary shaft seal assembly which provides positive-contact sealing when the shaft is not rotated and which operates with its sealing surfaces separated by a film of compressed ambient gas whose width is independent of the speed of shaft rotation. In a preferred embodiment, the assembly includes a disc affixed to the shaft for rotation therewith. Axially movable, non-rotatable plates respectively supported by sealing bellows are positioned on either side of the disc to be in sealing engagement therewith. Each plate carries piezoelectric transducer elements which are electrically energized at startup to produce films of compressed ambient gas between the confronting surfaces of the plates and the disc. Following shutdown of the shaft, the transducer elements are de-energized. A control circuit responds to incipient rubbing between the plate and either disc by altering the electrical input to the transducer elements to eliminate rubbing

  2. Seal containment system

    International Nuclear Information System (INIS)

    Kugler, R.W.; Gerkey, K.S.; Kasner, W.H.

    1978-01-01

    An automated system for transporting nuclear fuel elements between fuel element assembly stations without contaminating the area outside the sealed assembly stations is described. The system comprises a plurality of assembly stations connected together by an elongated horizontal sealing mechanism and an automatic transport mechanism for transporting a nuclear fuel element in a horizontal attitude between the assembly stations while the open end of the fuel element extends through the sealing mechanism into the assembly station enclosure. The sealing mechanism allows the fuel element to be advanced by the transport mechanism while limiting the escape of radioactive particles from within the assembly station enclosure. 4 claims, 6 figures

  3. Tucannon River Spring Chinook Salmon Captive Broodstock Program, Annual Report 2001.

    Energy Technology Data Exchange (ETDEWEB)

    Gallinat, Michael P.; Bumgarner, Joseph D.

    2002-05-01

    This report summarizes the objectives, tasks, and accomplishments of the Tucannon River spring chinook captive brood during 2001. The WDFW initiated a captive broodstock program in 1997. The overall goal of the Tucannon River captive broodstock program is for the short-term, and eventually long-term, rebuilding of the Tucannon River spring chinook salmon run, with the hope that natural production will sustain itself. The project goal is to rear captive salmon selected from the supplementation program to adults, spawn them, rear their progeny, and release approximately 150,000 smolts annually into the Tucannon River between 2003-2007. These smolt releases, in combination with the current hatchery supplementation program (132,000 smolts) and wild production, are expected to produce 600-700 returning adult spring chinook to the Tucannon River each year from 2005-2010. The captive broodstock program will collect fish from five (1997-2001) brood years (BY). The captive broodstock program was initiated with 1997 BY juveniles, and the 2001 BY fish have been selected. As of Jan 1, 2002, WDFW has 17 BY 1997, 159 BY 1998, 316 BY 1999, 448 BY 2000, and approximately 1,200 BY 2001 fish on hand at LFH. The 2001 eggtake from the 1997 brood year (Age 4) was 233,894 eggs from 125 ripe females. Egg survival was 69%. Mean fecundity based on the 105 fully spawned females was 1,990 eggs/female. The 2001 eggtake from the 1998 brood year (Age 3) was 47,409 eggs from 41 ripe females. Egg survival was 81%. Mean fecundity based on the 39 fully spawned females was 1,160 eggs/female. The total 2001 eggtake from the captive brood program was 281,303 eggs. As of May 1, 2002 we have 171,495 BY 2001 captive brood progeny on hand. A total of 20,592 excess fish were marked as parr (AD/CWT) and will be released during early May, 2002 into the Tucannon River (rkm 40-45). This will allow us to stay within our maximum allowed number (150,000) of smolts released. During April 2002, WDFW volitionally

  4. Core disruptive accident margin seal

    International Nuclear Information System (INIS)

    Golden, M.P.

    1979-01-01

    An apparatus for sealing the annulus defined within a substantially cylindrical rotatable riser assembly and plug combination of a nuclear reactor closure head is described. The apparatus comprises an inflatable sealing mechanism disposed in one portion of the riser assembly near the annulus such that upon inflation the sealing mechanism is radially actuated against the other portion of the riser assembly thereby sealing the annulus. The apparatus further comprises a connecting mechanism which places one end of the sealing mechanism in fluid communication with the reactor cover gas so that overpressurization of the reactor cover gas will increase the radial actuation of the sealing mechanism thus enhancing sealing of the annulus

  5. Captive breeding of pangolins: current status, problems and future prospects.

    Science.gov (United States)

    Hua, Liushuai; Gong, Shiping; Wang, Fumin; Li, Weiye; Ge, Yan; Li, Xiaonan; Hou, Fanghui

    2015-01-01

    Pangolins are unique placental mammals with eight species existing in the world, which have adapted to a highly specialized diet of ants and termites, and are of significance in the control of forest termite disaster. Besides their ecological value, pangolins are extremely important economic animals with the value as medicine and food. At present, illegal hunting and habitat destruction have drastically decreased the wild population of pangolins, pushing them to the edge of extinction. Captive breeding is an important way to protect these species, but because of pangolin's specialized behaviors and high dependence on natural ecosystem, there still exist many technical barriers to successful captive breeding programs. In this paper, based on the literatures and our practical experience, we reviewed the status and existing problems in captive breeding of pangolins, including four aspects, the naturalistic habitat, dietary husbandry, reproduction and disease control. Some recommendations are presented for effective captive breeding and protection of pangolins.

  6. Captive breeding of pangolins: current status, problems and future prospects

    Directory of Open Access Journals (Sweden)

    Liushuai Hua

    2015-06-01

    Full Text Available Pangolins are unique placental mammals with eight species existing in the world, which have adapted to a highly specialized diet of ants and termites, and are of significance in the control of forest termite disaster. Besides their ecological value, pangolins are extremely important economic animals with the value as medicine and food. At present, illegal hunting and habitat destruction have drastically decreased the wild population of pangolins, pushing them to the edge of extinction. Captive breeding is an important way to protect these species, but because of pangolin’s specialized behaviors and high dependence on natural ecosystem, there still exist many technical barriers to successful captive breeding programs. In this paper, based on the literatures and our practical experience, we reviewed the status and existing problems in captive breeding of pangolins, including four aspects, the naturalistic habitat, dietary husbandry, reproduction and disease control. Some recommendations are presented for effective captive breeding and protection of pangolins.

  7. Captive breeding of pangolins: current status, problems and future prospects

    Science.gov (United States)

    Hua, Liushuai; Gong, Shiping; Wang, Fumin; Li, Weiye; Ge, Yan; Li, Xiaonan; Hou, Fanghui

    2015-01-01

    Abstract Pangolins are unique placental mammals with eight species existing in the world, which have adapted to a highly specialized diet of ants and termites, and are of significance in the control of forest termite disaster. Besides their ecological value, pangolins are extremely important economic animals with the value as medicine and food. At present, illegal hunting and habitat destruction have drastically decreased the wild population of pangolins, pushing them to the edge of extinction. Captive breeding is an important way to protect these species, but because of pangolin’s specialized behaviors and high dependence on natural ecosystem, there still exist many technical barriers to successful captive breeding programs. In this paper, based on the literatures and our practical experience, we reviewed the status and existing problems in captive breeding of pangolins, including four aspects, the naturalistic habitat, dietary husbandry, reproduction and disease control. Some recommendations are presented for effective captive breeding and protection of pangolins. PMID:26155072

  8. Rotary peening with captive shot

    International Nuclear Information System (INIS)

    1998-02-01

    Roto Peen with captive shot removes coatings and surface contamination from concrete floors. The objective of treating radioactively contaminated concrete floors during the Deactivation and Decommissioning (D and D) process is to reduce the surface contamination levels to meet regulatory criteria for unrestricted use. The US Department of Energy (DOE) Chicago Operations office and DOE's Federal Energy Technology Center (FETC) jointly sponsored a Large-Scale Demonstration Project (LSDP) at the Chicago Pile-5 Research Reactor (CP-5) at Argonne National Laboratory-East (ANL). The objective of the LSDP is to demonstrate potentially beneficial D and D technologies in comparison with current baseline technologies. As part of the LSDP, roto Peen with captive shot was demonstrated March 17--20, 1997, to treat a 20 x 25 ft area of radioactively contaminated concrete floor on the service level of the CP-5 building

  9. Improved circumferential shaft seal

    Science.gov (United States)

    Ludwig, L. P.; Strom, T. N.

    1974-01-01

    Comparative tests of modified and unmodified carbon ring seals showed that addition of helical grooves to conventional segmented carbon ring seals reduced leakage significantly. Modified seal was insensitive to shaft runout and to flooding by lubricant.

  10. Seals for sealing a pressure vessel such as a nuclear reactor vessel or the like

    International Nuclear Information System (INIS)

    Bruns, H.J.; Huelsermann, K.H.

    1975-01-01

    A description is given of seals for sealing a pressure vessel such as a nuclear reactor vessel, steam boiler vessel, or any other vessel which is desirably sealed against pressure of the type including a housing and a housing closure that present opposed vertical sealing surfaces which define the sides of a channel. The seals of the present invention comprise at least one sealing member disposed in the channel, having at least one stop face, a base portion and two shank portions extending from the base portion to form a groove-like recess. The shank portions are provided with sealing surfaces arranged to mate with the opposed vertical pressure vessel sealing surfaces. A shank-spreading wedge element also disposed in the channel has at least one stop face and is engaged in the groove-like recess with the sealing member and wedge element stop face adjacent to each other

  11. Seals in nuclear reactors

    International Nuclear Information System (INIS)

    1979-01-01

    The seals described are for use in a nuclear reactor where there are fuel assemblies in a vessel, an inlet and an outlet for circulating a coolant in heat transfer relationship with the fuel assemblies and a closure head on the vessel in a tight fluid relationship. The closure head comprises rotatable plugs which have mechanical seals disposed in the annulus around each plug while allowing free rotation of the plug when the seal is not actuated. The seal is usually an elastomer or copper. A means of actuating the seal is attached for drawing it vertically into the annulus for sealing. When the reactor coolant is liquid sodium, contact with oxygen must be avoided and argon cover gas fills the space between the bottom of the closure head and the coolant liquid level and the annuli in the closure head. (U.K.)

  12. Investigation of positive shaft seals

    Science.gov (United States)

    Pfouts, J. O.

    1970-01-01

    Welded metal bellows secondary seals prevent secondary seal leakage with a minimum number of potential leak paths. High performance seal is obtained by controlling the potentially unstable seal-face movements induced by mechanical vibrations and fluid pressure pulsations.

  13. Continuous improvement of pump seals

    International Nuclear Information System (INIS)

    Wong, W.; Eyvindson, A.; Rhodes, D.B.

    2003-01-01

    Pump seal reliability continues to be an area needing improvement and ongoing vigilance. Methods have been developed for identifying and assessing factors relating to seal performance, selecting the most relevant ones for a specific station, and then focusing on the most significant aspects and how to improve. Discussion invariably addresses maintenance practices, seal design, monitoring capabilities, operating conditions, transients, and pump and motor design. Success in reliability improvement requires ongoing dialogue among the station operators, pump manufacturers and seal designers. AECL CAN-seals lead the nuclear industry in reliability and seal life. They effectively save operators millions of dollars in outage time and person-rem. This paper describes some of the significant developments in AECL's ongoing program in seal R and D, as well as recent new installations following the most demanding seal qualification programs to date. (author)

  14. (Forced Walks on the Wild Side: Precarious Borders in American Captivity Narratives

    Directory of Open Access Journals (Sweden)

    Alexander Starre

    2010-01-01

    Full Text Available Most readings of American captivity narratives have so far investigated their intercultural, psychological, and theological significances, while disregarding their ecological aspects. Despite its appropriation into US-American national literature, the captivity genre contains at its root a transcultural plot of an individual's confrontation with the environment and the unsettling forces of wilderness and animality. These personal memoirs indeed hold global value by pointing to our collective embeddedness and embodiedness.This essay surveys two early captivity narratives - the classical one by Mary Rowlandson (1682 and a lesser known text by John Gyles (1736 - alongside contemporary examples of the genre that relate the stories of American captives in Iraq and Colombia.

  15. Ferrules seals

    Science.gov (United States)

    Smith, J.L.

    1984-07-10

    A device is provided for sealing an inner tube and an outer tube without excessively deforming the tubes. The device includes two ferrules which cooperate to form a vacuum-tight seal between the inner tube and outer tube and having mating surfaces such that overtightening is not possible. 3 figs.

  16. A magnetic fluid seal for rotary blood pumps: effects of seal structure on long-term performance in liquid.

    Science.gov (United States)

    Mitamura, Yoshinori; Takahashi, Sayaka; Amari, Shuichi; Okamoto, Eiji; Murabayashi, Shun; Nishimura, Ikuya

    2011-03-01

    A magnetic fluid (MF) seal enables mechanical contact-free rotation of the shaft and hence has excellent durability. The performance of an MF seal, however, has been reported to decrease in liquids. We developed an MF seal that has a "shield" mechanism, and a new MF with a higher magnetization of 47.9 kA/m. The sealing performance of the MF seal installed in a rotary blood pump was studied. Three types of MF seals were used. Seal A was a conventional seal without a shield. Seal B had the same structure as that of Seal A, but the seal was installed at 1 mm below liquid level. Seal C was a seal with a shield and the MF was set at 1 mm below liquid level. Seal A failed after 6 and 11 days. Seal B showed better results (20 and 73 days). Seal C showed long-term durability (217 and 275 days). The reason for different results in different seal structures was considered to be different flow conditions near the magnetic fluid. Fluid dynamics near the MF in the pump were analyzed using computational fluid dynamics (CFD) software. We have developed an MF seal with a shield that works in liquid for >275 days. The MF seal is promising as a shaft seal for rotary blood pumps.

  17. Aerobic salivary bacteria in wild and captive Komodo dragons.

    Science.gov (United States)

    Montgomery, Joel M; Gillespie, Don; Sastrawan, Putra; Fredeking, Terry M; Stewart, George L

    2002-07-01

    During the months of November 1996, August 1997, and March 1998, saliva and plasma samples were collected for isolation of aerobic bacteria from 26 wild and 13 captive Komodo dragons (Varanus komodoensis). Twenty-eight Gram-negative and 29 Gram-positive species of bacteria were isolated from the saliva of the 39 Komodo dragons. A greater number of wild than captive dragons were positive for both Gram-negative and Gram-positive bacteria. The average number of bacterial species within the saliva of wild dragons was 46% greater than for captive dragons. While Escherichia coli was the most common bacterium isolated from the saliva of wild dragons, this species was not present in captive dragons. The most common bacteria isolated from the saliva of captive dragons were Staphylococcus capitis and Staphylococcus capitis and Staphylococcus caseolyticus, neither of which were found in wild dragons. High mortality was seen among mice injected with saliva from wild dragons and the only bacterium isolated from the blood of dying mice was Pasteurella multocida. A competitive inhibition enzyme-linked immunosorbent assay revealed the presence of anti-Pasteurella antibody in the plasma of Komodo dragons. Four species of bacteria isolated from dragon saliva showed resistance to one or more of 16 antimicrobics tested. The wide variety of bacteria demonstrated in the saliva of the Komodo dragon in this study, at least one species of which was highly lethal in mice and 54 species of which are known pathogens, support the observation that wounds inflicted by this animal are often associated with sepsis and subsequent bacteremia in prey animals.

  18. Research on Captive Broodstock Technology for Pacific Salmon, 1995 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Swanson, Penny; Pascho, Ronald; Hershberger, William K. (Northwest and Alaska Fisheries Center, Coastal Zone and Estuarine Studies Division, Seattle, WA)

    1996-01-01

    This report summarizes research on captive broodstock technologies conducted during 1995 under Bonneville Power Administration Project 93-56. Investigations were conducted by the National Marine Fisheries Service (NMFS) in cooperation with the US Fish and Wildlife Service, University of Washington, and Northwest Biological Science Center (US Geological Survey). Studies encompassed several categories of research, including fish husbandry, reproductive physiology, immunology, pathology, nutrition, and genetics. Captive broodstock programs are being developed and implemented to aid recovery of endangered Pacific salmon stocks. Like salmon hatchery programs, however, captive broodstock programs are not without problems and risks to natural salmon populations. The research projects described in this report were developed in part based on a literature review, Assessment of the Status of Captive Broodstock Technology for Pacific Salmon. The work was divided into three major research areas: (1) research on sockeye salmon; (2) research on spring chinook salmon; and (3) research on quantitative genetic problems associated with captive broodstock programs. Investigations of nutrition, reproductive physiology, fish husbandry, and fish health were integrated into the research on sockeye and spring chinook salmon. A description of each investigation and its major findings and conclusions is presented.

  19. Borehole sealing method and apparatus

    International Nuclear Information System (INIS)

    Hartley, J.N.; Jansen, G. Jr.

    1977-01-01

    A method and apparatus is described for sealing boreholes in the earth. The borehole is blocked at the sealing level, and a sealing apparatus capable of melting rock and earth is positioned in the borehole just above seal level. The apparatus is heated to rock-melting temperature and powdered rock or other sealing material is transported down the borehole to the apparatus where it is melted, pooling on the mechanical block and allowed to cool and solidify, sealing the hole. Any length of the borehole can be sealed by slowly raising the apparatus in the borehole while continuously supplying powdered rock to the apparatus to be melted and added to the top of the column of molten and cooling rock, forming a continuous borehole seal. The sealing apparatus consists of a heater capable of melting rock, including means for supplying power to the heater, means for transporting powdered rock down the borehole to the heater, means for cooling the apparatus and means for positioning the apparatus in the borehole. 5 claims, 1 figure

  20. Tucannon River Spring Chinook Salmon Captive Broodstock Program, Annual Report 2002.

    Energy Technology Data Exchange (ETDEWEB)

    Gallinat, Michael; Varney, Michelle

    2003-05-01

    This report summarizes the objectives, tasks, and accomplishments of the Tucannon River Spring Chinook Captive Broodstock Program during 2002. The WDFW initiated a captive broodstock program in 1997. The overall goal of the Tucannon River captive broodstock program is for the short-term, and eventually long-term, rebuilding of the Tucannon River spring chinook salmon run, with the hope that natural production will sustain itself. The project goal is to rear captive salmon selected from the supplementation program to adults, spawn them, rear their progeny, and release approximately 150,000 smolts annually into the Tucannon River between 2003-2007. These smolt releases, in combination with the current hatchery supplementation program (132,000 smolts) and wild production, are expected to produce 600-700 returning adult spring chinook to the Tucannon River each year from 2005-2010. The captive broodstock program collected fish from five (1997-2001) brood years (BY). As of January 1, 2003, WDFW has approximately 11 BY 1998, 194 BY 1999, 314 BY 2000, 447 BY 2001, and 300 BY 2002 (for extra males) fish on hand at LFH. The 2002 eggtake from the 1997 brood year (Age 5) was 13,176 eggs from 10 ripe females. Egg survival was 22%. Mean fecundity based on the 5 fully spawned females was 1,803 eggs/female. The 2002 eggtake from the 1998 brood year (Age 4) was 143,709 eggs from 93 ripe females. Egg survival was 29%. Mean fecundity based on the 81 fully spawned females was 1,650 eggs/female. The 2002 eggtake from the 1999 brood year (Age 3) was 19,659 eggs from 18 ripe females. Egg survival was 55%. Mean fecundity based on the 18 fully spawned fish was 1,092 eggs/female. The total 2002 eggtake from the captive brood program was 176,544 eggs. A total of 120,833 dead eggs (68%) were removed with 55,711 live eggs remaining for the program. As of May 1, 2003 we had 46,417 BY 2002 captive brood progeny on hand A total of 20,592 excess BY 01 fish were marked as parr (AD/CWT) and

  1. TECHNOLOGY ROADMAPPING FOR IAEA SEALS.

    Energy Technology Data Exchange (ETDEWEB)

    HOFFHEINS,B.; ANNESE,C.; GOODMAN,M.; OCONNOR,W.; GUSHUE,S.; PEPPER,S.

    2003-07-13

    In the fall of 2002, the U.S. Support Program (USSP) initiated an effort to define a strategy or ''roadmap'' for future seals technologies and to develop a generalized process for planning safeguards equipment development, which includes seals and other safeguards equipment. The underlying objectives of the USSP include becoming more proactive than reactive in addressing safeguards equipment needs, helping the IAEA to maintain an inventory of cost-effective, reliable, and effective safeguards equipment, establishing a long-term planning horizon, and securing IAEA ownership in the process of effective requirements definition and timely transitioning of new or improved systems for IAEA use. At an initial workshop, seals, their functions, performance issues, and future embodiments were discussed in the following order: adhesive seals, metal seals, passive and active loop seals, ultrasonic seals, tamper indicating enclosures (including sample containers, equipment enclosures, and conduits). Suggested improvements to these technologies focused largely on a few themes: (1) The seals must be applied quickly, easily, and correctly; (2) Seals and their associated equipment should not unduly add bulk or weight to the inspectors load; (3) Rapid, in-situ verifiability of seals is desirable; and (4) Seal systems for high risk or high value applications should have two-way, remote communications. Based upon these observations and other insights, the participants constructed a skeletal approach for seals technology planning. The process begins with a top-level review of the fundamental safeguards requirements and extraction of required system features, which is followed by analysis of suitable technologies and identification of technology gaps, and finally by development of a planning schedule for system improvements and new technology integration. Development of a comprehensive procedure will require the partnership and participation of the IAEA. The

  2. Closure and Sealing Design Calculation

    International Nuclear Information System (INIS)

    T. Lahnalampi; J. Case

    2005-01-01

    The purpose of the ''Closure and Sealing Design Calculation'' is to illustrate closure and sealing methods for sealing shafts, ramps, and identify boreholes that require sealing in order to limit the potential of water infiltration. In addition, this calculation will provide a description of the magma that can reduce the consequences of an igneous event intersecting the repository. This calculation will also include a listing of the project requirements related to closure and sealing. The scope of this calculation is to: summarize applicable project requirements and codes relating to backfilling nonemplacement openings, removal of uncommitted materials from the subsurface, installation of drip shields, and erecting monuments; compile an inventory of boreholes that are found in the area of the subsurface repository; describe the magma bulkhead feature and location; and include figures for the proposed shaft and ramp seals. The objective of this calculation is to: categorize the boreholes for sealing by depth and proximity to the subsurface repository; develop drawing figures which show the location and geometry for the magma bulkhead; include the shaft seal figures and a proposed construction sequence; and include the ramp seal figure and a proposed construction sequence. The intent of this closure and sealing calculation is to support the License Application by providing a description of the closure and sealing methods for the Safety Analysis Report. The closure and sealing calculation will also provide input for Post Closure Activities by describing the location of the magma bulkhead. This calculation is limited to describing the final configuration of the sealing and backfill systems for the underground area. The methods and procedures used to place the backfill and remove uncommitted materials (such as concrete) from the repository and detailed design of the magma bulkhead will be the subject of separate analyses or calculations. Post-closure monitoring will not

  3. Sealing properties of mechanical seals for an axial flow blood pump.

    Science.gov (United States)

    Tomioka, J; Mori, T; Yamazaki, K; Koyanagi, H

    1999-08-01

    A miniature intraventricular axial flow blood pump for left ventricular support is under development. One of the key technologies required for such pumps is sealing of the motor shaft. In this study, to prevent blood backflow into the motor side, mechanical seals were developed and their sealing properties investigated. In the experimental apparatus, the mechanical seal separated the bovine blood on the chamber side from the cooling water on the motor side. A leakage of the blood was measured by inductively coupled plasma (ICP) light emission analysis. The rate of hemolysis was measured by the cyanmethemoglobin method. Frictional torque acting on the shaft was measured by a torque transducer. In the experiments, the rotational speed of the shaft was changed from 1,000 to 10,000 rpm, and the contact force of the seal faces was changed from 1.96 to 4.31 N. To estimate lubrication regimes, the Stribeck curve, a diagram of the coefficient of friction against the bearing characteristic G number, was drawn. The results of the experiments showed that both the leakage of blood and the rate of hemolysis were very small. The friction loss was also very small. The mechanical seal was operated in various lubrication regimes, from a fluid lubrication regime to a mixed lubrication regime.

  4. Safeguards sealing systems for Zebra

    International Nuclear Information System (INIS)

    Ingram, G.; Jamieson, G.R.

    1983-01-01

    A relatively simple design has been produced for safeguards seals to be applied throughout the fuel containing areas at Zebra. It is based on the use of wire seals and regular Inspector surveillance. The application of the system would allow an Inspector to establish to a high degree of confidence that significant quantities of fuel had not been diverted during an intensive experimental programme. It would add about 5% to the time required for experiments, and careful planning would reduce this value. The inspection effort required to witness element movements during the experimental programme would average about 2 hours per day, with a further 2 hours spent each week on NDA of the fuel exposed. The Safeguards Inspector would require to spend about 25% of his time in the reactor area and would have ample time to deal with the relatively small number of fuel movements taking place in the storage area and with his duties elsewhere in the plant. During a core change, full-time inspection effort would be required for about 6 weeks each year. (author)

  5. Investigating the sealing capacity of a seal system in rock salt (DOPAS project)

    Energy Technology Data Exchange (ETDEWEB)

    Jantschik, Kyra; Moog, Helge C.; Czaikowski, Oliver; Wieczorek, Klaus [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Braunschweig (Germany)

    2016-11-15

    This paper describes research and development work on plugging and sealing repositories, an issue of fundamental importance for the rock salt option which represents one of the three European repository options, besides the clay rock and the crystalline rock options. The programme aims at providing experimental data needed for the theoretical analysis of the long-term sealing capacity of concrete- based sealing materials. In order to demonstrate hydro-mechanical material stability under representative load scenarios, a comprehensive laboratory testing programme is carried out. This comprises investigation of the sealing capacity of the combined seal system and impact of the so-called excavation-damaged zones (EDZ) as well as investigation of the hydro-chemical long-term stability of the seal in contact with different brines under diffusive and advective conditions. This paper presents experimental approaches and preliminary results from laboratory investigations on salt concrete and combined systems as obtained to date.

  6. Regenerator cross arm seal assembly

    Science.gov (United States)

    Jackman, Anthony V.

    1988-01-01

    A seal assembly for disposition between a cross arm on a gas turbine engine block and a regenerator disc, the seal assembly including a platform coextensive with the cross arm, a seal and wear layer sealingly and slidingly engaging the regenerator disc, a porous and compliant support layer between the platform and the seal and wear layer porous enough to permit flow of cooling air therethrough and compliant to accommodate relative thermal growth and distortion, a dike between the seal and wear layer and the platform for preventing cross flow through the support layer between engine exhaust and pressurized air passages, and air diversion passages for directing unregenerated pressurized air through the support layer to cool the seal and wear layer and then back into the flow of regenerated pressurized air.

  7. Tucannon River Spring Chinook Salmon Captive Brood Program, FY 2000 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Bumgarner, Joseph D.; Gallinat, Michael P.

    2001-06-01

    This report summarizes the objectives, tasks, and accomplishments of the Tucannon River spring chinook captive brood program from program inception (1997) through April 2001. The WDFW initiated a captive broodstock program in 1997. The overall goal of the Tucannon River captive broodstock program is for the short-term, and eventually long-term, rebuilding of the Tucannon River spring chinook salmon run, with the hope that natural production will eventually sustain itself. The project goal is to rear captive salmon to adults, spawn them, rear their progeny, and release approximately 150,000 smolts annually into the Tucannon River between 2003-2007. These smolt releases, in combination with the current hatchery supplementation program (132,000 smolts), and wild production, is expected to produce 600-700 returning adult spring chinook to the Tucannon River each year from 2005-2010. The Master Plan, Environmental Assessment, and most facility modifications at LFH were completed for the Tucannon River spring chinook captive broodstock program during FY2000 and FY2001. DNA samples collected since 1997 have been sent to the WDFW genetics lab in Olympia for baseline DNA analysis. Results from the genetic analysis are not available at this time. The captive broodstock program is planned to collect fish from five (1997-2001) brood years (BY). The captive broodstock program was initiated with 1997 BY juveniles, and the 2000 BY fish have been selected. As of April 30, 2001, WDFW has 172 BY 1997, 262 BY 1998, 407 BY 1999, and approximately 1,190 BY 2000 fish on hand at LFH. Twelve of 13 mature 97 BY females were spawned in 2000. Total eggtake was 14,813. Mean fecundity was 1,298 eggs/female based on 11 fully spawned females. Egg survival to eye-up was 47.3%. This low survival was expected for three year old captive broodstock females. As of April 30, 2001, WDFW has 4,211 captive broodstock progeny on hand. These fish will be tagged with blank wire tag without fin clips and

  8. Aerial surveys of seals at Rødsand seal sanctuary and adjacent haul-out sites

    DEFF Research Database (Denmark)

    Teilmann, J.; Dietz, R.; Edren, Susi M.C.

    This report describes the preliminary results of aerial surveys at Rødsand seal sanctuary, southeast Denmark and adjacent seal haul-out sites in southwestern Baltic. The work was carried out in connection with studies of potential effects of the Nysted offshore wind farm. Rødsand seal sanctuary...... is a part of seal management area 4, and the area is believed to hold a more or less closed population with little exchange to other areas. Although the harbour seal is relatively stationary there may be movements between the haul-out sites in the area. A possible reaction to disturbance from...... the construction and operation of the wind farm may be that the seals use other haul-out sites to a higher extend....

  9. Sharks in Captivity: The Role of Husbandry, Breeding, Education, and Citizen Science in Shark Conservation.

    Science.gov (United States)

    Grassmann, Michael; McNeil, Bryan; Wharton, Jim

    The role of public aquariums in promoting conservation has changed substantially over the decades, evolving from entertainment attractions to educational and research centres. In many facilities, larger sharks are an essential part of the collection and represent one of the biggest draws for the public. Displaying healthy elasmobranchs comes with many challenges, but improvements in husbandry techniques have enabled aquariums to have success with a variety of species. The establishment of organisations such as the Association of Zoos and Aquariums, and the completion of texts like the Elasmobranch Husbandry Manual, has helped set high standards of care for sharks in captivity and promoted international conservation efforts. Aquariums keeping sharks are in a unique position to influence local, regional, and international attitudes and policies by acting as both educational and research facilities. Interactions with multiple stakeholders of diverse educational and demographic backgrounds through the use of in-house advocacy, public outreach, media interviews, and partnerships with academic and government institutions enable these facilities to engage and share information with a broad audience. Although the data collected on sharks in captivity often cannot be directly translated to animals in the wild, it offers better insight into a number of life history traits and poorly understood behaviours, and has been the foundation for many captive breeding programs. Several Northeast Pacific (NEP) shark species are commonly displayed for long durations or bred in aquariums, while other less studied species have been held for short periods to collect valuable data that can be applied towards ongoing studies and conservation measures. Here, we discuss past and current tangible benefits of holding NEP sharks in captivity, as well as noting several ways in which future research and education activities will continue to inform and shape public opinions on shark management and

  10. R+D works for the further development of high temperature reactors. (1) Captive bearing experiments for active magnetic bearings. (2) Captive bearing test for HTR blowers

    International Nuclear Information System (INIS)

    1991-01-01

    When using active magnetic bearings as blower shaft bearings, blower motors and bearings must be protected against mechanical damage in case of faults (example: total electrical supply failure due to the supply cables breaking). So-called captive bearings are provided, in order to be able to shut the blowers down safely in such faults. These captive bearings are roller bearings which are additionally fitted in the area of the blower shaft bearings, to prevent mechanical contact between the blower rotor and stator. As there was little experience available for the given boundary conditions, such as - speed, - acceleration, - bearing load, - bearing dimensions, - ambient conditions, appropriate development and tests had to be carried out. It was important to determine suitable captive bearings and the necessary ambient conditions, which will make it possible to support the failures of the magnetic bearings to be expected in 40 years' operation of the reactor without damage and to meet the requirements of the captive bearings. (orig./GL) [de

  11. Ceramic/metal seals. [refractory materials for hermetic seals for lighium-metal sulfide batteries

    Science.gov (United States)

    Bredbenner, A. M.

    1977-01-01

    Design criteria are discussed for a hermetic seal capable of withstanding the 450 C operating temperature of a lithium-metal sulfide battery system. A mechanical seal consisting of two high strength alloy metal sleeves welded or brazed to a conductor assembly and pressed onto a ceramic is described. The conductor center passes through the ceramic but is not sealed to it. The seal is effected on the outside of the taper where the tubular part is pressed down over and makes contact.

  12. Proteomic comparisons of venoms of long-term captive and recently wild-caught Eastern brown snakes (Pseudonaja textilis) indicate venom does not change due to captivity.

    Science.gov (United States)

    McCleary, Ryan J R; Sridharan, Sindhuja; Dunstan, Nathan L; Mirtschin, Peter J; Kini, R Manjunatha

    2016-07-20

    Snake venom is a highly variable phenotypic character, and its variation and rapid evolution are important because of human health implications. Because much snake antivenom is produced from captive animals, understanding the effects of captivity on venom composition is important. Here, we have evaluated toxin profiles from six long-term (LT) captive and six recently wild-caught (RC) eastern brown snakes, Pseudonaja textilis, utilizing gel electrophoresis, HPLC-MS, and shotgun proteomics. We identified proteins belonging to the three-finger toxins, group C prothrombin activators, Kunitz-type serine protease inhibitors, and phospholipases A2, among others. Although crude venom HPLC analysis showed LT snakes to be higher in some small molecular weight toxins, presence/absence patterns showed no correlation with time in captivity. Shotgun proteomics indicated the presence of similar toxin families among individuals but with variation in protein species. Although no venom sample contained all the phospholipase A2 subunits that form the textilotoxin, all did contain both prothrombin activator subunits. This study indicates that captivity has limited effects on venom composition, that venom variation is high, and that venom composition may be correlated to geographic distribution. Through proteomic comparisons, we show that protein variation within LT and RC groups of snakes (Pseudonaja textilis) is high, thereby resulting in no discernible differences in venom composition between groups. We utilize complementary techniques to characterize the venom proteomes of 12 individual snakes from our study area, and indicate that individuals captured close to one another have more similar venom gel electrophoresis patterns than those captured at more distant locations. These data are important for understanding natural variation in and potential effects of captivity on venom composition. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Nuclear instrumentation cable end seal

    International Nuclear Information System (INIS)

    Cannon, C.P.; Brown, D.P.

    1979-01-01

    An improved coaxial end seal for hermetically sealed nuclear instrumentation cable exhibiting an improved breakdown pulse noise characteristic under high voltage, high temperature conditions is described. A tubular insulator body has metallized interior and exterior surface portions which are braze sealed to a center conductor and an outer conductive sheath. The end surface of the insulator body which is directed toward the coaxial cable to which it is sealed has a recessed surface portion within which the braze seal material terminates

  14. Turbine interstage seal with self-balancing capability

    Science.gov (United States)

    Mills, Jacob A; Jones, Russell B; Sexton, Thomas D

    2017-09-26

    An interstage seal for a turbine of a gas turbine engine, the interstage seal having a seal carrier with an axial extending seal tooth movable with a stator of the engine, and a rotor with a seal surface that forms the interstage seal with the seal tooth, where a magnetic force produced by two magnets and a gas force produced by a gas pressure acting on the seal carrier forms a balancing force to maintain a close clearance of the seal without the seal tooth contacting the rotor seal surfaces during engine operation. In other embodiments, two pairs of magnets produce first and second magnetic forces that balance the seal in the engine.

  15. Maintenance of Genetic Diversity in Natural Spawning of Captively-Reared Endangered Sockeye Salmon, Oncorhynchus nerka

    Directory of Open Access Journals (Sweden)

    Ruth E. Withler

    2014-06-01

    Full Text Available Captive propagation of Pacific salmon is routine, but few captive breeding programs have been conducted to successfully re-establish extirpated wild populations. A captive breeding program for endangered Sakinaw Lake sockeye salmon was established from 84 adults between 2002 and 2005, just prior to extirpation of the wild population. After several years of absence, sockeye salmon released from captivity returned to spawn in Sakinaw Lake in 2010 and in all years thereafter. Freshwater survival rates of released hatchery fry and naturally produced progeny of reintroduced sockeye salmon have not limited abundance of the reintroduced population. In contrast, marine survival rates for Sakinaw sockeye salmon have been <1%, a level that precludes population restoration in the absence of supplementation. Genetic diversity commensurate with the number of parental founders has been maintained in captivity. The 517 adult second-generation captive fish that spawned in Sakinaw Lake in 2011 produced a smolt emigration of almost 28,000 juvenile fish with an effective population size of 132. Allelic richness and gene diversity levels in the smolts were similar to those observed in captivity. This indicates genetic contributions from all or most founding parents have been retained both in captivity and in the nascent reintroduced natural population.

  16. Enhanced sealing project (ESP): evolution of a full-sized concrete and bentonite shaft seal

    International Nuclear Information System (INIS)

    Dixon, D.A.; Priyanto, D.G.; Martino, J.B.; De Combarieu, M.; Johansson, R.; Korkeakoski, P.; Villagran, J.

    2012-01-01

    Document available in extended abstract form only. A full-scale shaft seal was designed and installed in the 5-m-diameter access shaft at Atomic Energy of Canada's (AECL's) Underground Research Laboratory (URL) at the point where he shaft intersects an ancient water-bearing, low-angle thrust fault in granitic rock. The seal, part of the permanent closure of the URL, consists of a 6-m-thick bentonite-based component sandwiched between 3-m-thick upper and lower, 3-m-thick concrete components. The bentonite-based component spans the fracture zone and extends approximately 1 m beyond the maximum identified extent of the fracture. This design was adopted in order to limit water from the deeper, saline regions mixing with the fresher, near-surface groundwater regime. The concrete components provide the mechanical confinement and an in situ compacted 40/60 mixture of bentonite clay and quartz sand provides the sealing component. Construction of the shaft seal was done as part of Canada's Nuclear Legacies Liability Program. However, monitoring the seal evolution was not part of the decommissioning program's mandate. In addition to accomplishing the permanent closure of the URL, this seal's construction provides a unique opportunity to instrument and monitor the evolution of a full-scale shaft seal as well as the recovery of the regional groundwater regime as the facility passively floods above the seal. A jointly funded monitoring project was developed by NWMO (Canada), SKB (Sweden), Posiva (Finland) and ANDRA (France) and since mid 2009 the thermal, hydraulic and mechanical evolution of the seal has been constantly monitored. The evolution of the type of seal being monitored in the ESP is of relevance to repository closure planning, gaining confidence in the functionality of shaft seals. Although constructed in a crystalline rock medium, the results of the ESP are expected to be relevant to the performance of seals in a variety of host rock types. The shaft seal has been

  17. Sealing a conduit end

    International Nuclear Information System (INIS)

    Mentz, R.M.

    1993-01-01

    An apparatus for sealing or blocking conduits, such as the primary nozzles of a nuclear steam generator is described. It includes an annular bracket sealingly attached to the open end of the nozzle, the bracket having a plurality of threaded holes therein. Mounted atop the bracket is a generally circular nozzle dam for covering the opening. Interposed between the nozzle dam and the bracket is an extrusion-resistant seal member having a plurality of apertures therethrough for receiving each bolt. The seal member is configured to resist extrusion by having laminated layers of differing hardnesses, so that the seal member will not laterally extrude away from each bolt in a manner that enlarges the aperture surrounding each bolt as the nozzle dam is bolted to the bracket. (author)

  18. Hermetic Seal Leak Detection Apparatus

    Science.gov (United States)

    Kelley, Anthony R. (Inventor)

    2013-01-01

    The present invention is a hermetic seal leak detection apparatus, which can be used to test for hermetic seal leaks in instruments and containers. A vacuum tight chamber is created around the unit being tested to minimize gas space outside of the hermetic seal. A vacuum inducing device is then used to increase the gas chamber volume inside the device, so that a slight vacuum is pulled on the unit being tested. The pressure in the unit being tested will stabilize. If the stabilized pressure reads close to a known good seal calibration, there is not a leak in the seal. If the stabilized pressure reads closer to a known bad seal calibration value, there is a leak in the seal. The speed of the plunger can be varied and by evaluating the resulting pressure change rates and final values, the leak rate/size can be accurately calculated.

  19. Reusable, tamper-indicating seal

    International Nuclear Information System (INIS)

    Ryan, M.J.

    1978-01-01

    A reusable, tamper-indicating seal is comprised of a drum confined within a fixed body and rotatable in one direction therewithin, the top of the drum constituting a tray carrying a large number of small balls of several different colors. The fixed body contains parallel holes for looping a seal wire therethrough. The base of the drums carries cams adapted to coact with cam followers to lock the wire within the seal at one angular position of the drum. A channel in the fixed body, visible from outside the seal, adjacent the tray constitutes a segregated location for a small plurality of the colored balls. A spring in the tray forces colored balls into the segregated location at one angular position of the drum, further rotation securing the balls in position and the wires in the seal. A wedge-shaped plough removes the balls from the segregated location, at a different angular position of the drum, the wire being unlocked at the same postion. A new pattern of colored balls will appear in the segregated location when the seal is relocked

  20. The Traumatic Tube: Bleeding Rectal Ulcer Caused by Flexi-Seal Device

    Directory of Open Access Journals (Sweden)

    Abhinav Tiwari

    2017-01-01

    Full Text Available Diarrhea and fecal incontinence are common in critically ill patients and present a challenging problem in patient management. The Flexi-Seal® Fecal Management System is a device to divert the stools away from the patient, thus improving the care to patients with fecal incontinence. There have been only few case reports describing the complications with the use of this device. Here, we present a case of a 77-year-old woman who was admitted due to massive hematochezia while on anticoagulation. She was found to have a large rectal ulcer caused by the Flexi-Seal device, used during the last hospital stay for fecal incontinence. Flexi-Seal device can be effective for the management of incontinence; however, caution should be exercised during handling and pressure from the retention balloon should be relieved periodically.

  1. Double angle seal forming lubricant film

    Science.gov (United States)

    Ernst, William D.

    1984-01-01

    A lubricated piston rod seal which inhibits gas leaking from a high pressure chamber on one side of the seal to a low pressure chamber on the other side of the seal. A liquid is supplied to the surface of the piston rod on the low pressure side of the seal. This liquid acts as lubricant for the seal and provides cooling for the rod. The seal, which can be a plastic, elastomer or other material with low elastic modulus, is designed to positively pump lubricant through the piston rod/seal interface in both directions when the piston rod is reciprocating. The capacity of the seal to pump lubricant from the low pressure side to the high pressure side is less than its capacity to pump lubricant from the high pressure side to the low pressure side which ensures that there is zero net flow of lubricant to the high pressure side of the seal. The film of lubricant between the seal and the rod minimizes any sliding contact and prevents the leakage of gas. Under static conditions gas leakage is prevented by direct contact between the seal and the rod.

  2. Discrepancies in the occurrence of Balantidium coli between wild and captive African great apes.

    Science.gov (United States)

    Pomajbíková, Kateřina; Petrželková, Klára J; Profousová, Ilona; Petrášová, Jana; Modrý, David

    2010-12-01

    Balantidium coli is a ciliate reported in many mammalian species, including African great apes. In the former, asymptomatic infections as well as clinical balantidiasis have been reported in captivity. We carried out a cross-sectional study of B. coli in African great apes (chimpanzees, bonobos, and both species of gorillas) and examined 1,161 fecal samples from 28 captive facilities in Europe, plus 2 sanctuaries and 11 wild sites in Africa. Samples were analyzed with the use of Sheather's flotation and merthiolate-iodine-formaldehyde (MIFC) sedimentation. MIFC sedimentation was the more sensitive technique for diagnostics of B. coli in apes. Although not detected in any wild-ape populations, B. coli was diagnosed in 52.6% of captive individuals. Surprisingly, in the apes' feces, trophozoites of B. coli were commonly detected, in contrast with other animals, e.g., Old World monkeys, pigs, etc. Most likely reservoirs for B. coli in captive apes include synantropic rats. High starch diets in captive apes are likely to exacerbate the occurrence of balantidiasis in captive apes.

  3. Shaft and tunnel sealing considerations

    International Nuclear Information System (INIS)

    Kelsall, P.C.; Shukla, D.K.

    1980-01-01

    Much of the emphasis of previous repository sealing research has been placed on plugging small diameter boreholes. It is increasingly evident that equal emphasis should now be given to shafts and tunnels which constitute more significant pathways between a repository and the biosphere. The paper discusses differences in requirements for sealing shafts and tunnels as compared with boreholes and the implications for seal design. Consideration is given to a design approach for shaft and tunnel seals based on a multiple component design concept, taking into account the requirements for retrievability of the waste. A work plan is developed for the future studies required to advance shaft and tunnel sealing technology to a level comparable with the existing technology for borehole sealing

  4. Rotatable seal assembly

    International Nuclear Information System (INIS)

    Garibaldi, J.L.; Logan, C.M.

    1982-01-01

    An assembly is provided for rotatably supporting a rotor on a stator so that vacuum chambers in the rotor and stator remain in communication while the chambers are sealed from ambient air, which enables the use of a ball bearing or the like to support most of the weight of the rotor. The apparatus includes a seal device mounted on the rotor to rotate therewith, but shiftable in position on the rotor while being sealed to the rotor as by an oring. The seal device has a flat face that is biased towards a flat face on the stator, and pressurized air is pumped between the faces to prevent contact between them while spacing them a small distance apart to avoid the inflow of large amounts of air between the faces and into the vacuum chambers

  5. Recent advances in magnetic liquid sealing

    International Nuclear Information System (INIS)

    Raj, K.; Stahl, P.; Bottenberg, W.; True, D.; Martis, G.; Zook, C.

    1979-01-01

    In this paper recent work in design and testing of two special magnetic liquid seals extending the state-of-the-art of ferrofluidic sealing is discussed. These custom seals are a moving belt edge seal and an exclusion seal. The first seal provides a hermetic barrier to solid particulates expected to be present in enclosed nuclear environments. The second seal is used on a magnetic disk drive spindle and reduces the particulate contaminants in the memory disk pack area by up to three orders of magnitude. In addition, bearing life in the spindle is found to be doubled due to reduction of operating temperature. The fundamentals of magnetic fluid sealing are presented in terms of magnetic circuit design and physical properties of ferrofluids

  6. Seal Related Development Activities at EG/G

    Science.gov (United States)

    Greiner, Harold F.

    1991-01-01

    Seal related development activities including modeling, analysis, and performance testing are described for several current seal related projects. Among the current seal related projects are the following: high pressure gas sealing systems for turbomachinery; brush seals for gas path sealing in gas turbines; and tribological material evaluation for wear surfaces in sealing systems.

  7. SEALING SIMULATED LEAKS

    Energy Technology Data Exchange (ETDEWEB)

    Michael A. Romano

    2004-09-01

    This report details the testing equipment, procedures and results performed under Task 7.2 Sealing Simulated Leaks. In terms of our ability to seal leaks identified in the technical topical report, Analysis of Current Field Data, we were 100% successful. In regards to maintaining seal integrity after pigging operations we achieved varying degrees of success. Internal Corrosion defects proved to be the most resistant to the effects of pigging while External Corrosion proved to be the least resistant. Overall, with limitations, pressure activated sealant technology would be a viable option under the right circumstances.

  8. Fog seal guidelines.

    Science.gov (United States)

    2003-10-01

    Fog seals are a method of adding asphalt to an existing pavement surface to improve sealing or waterproofing, prevent further stone loss by holding aggregate in place, or simply improve the surface appearance. However, inappropriate use can result in...

  9. Reactor vessel sealing plug

    International Nuclear Information System (INIS)

    Dooley, R.A.

    1986-01-01

    An apparatus is described for sealing a cold leg nozzle of a nuclear reactor pressure vessel from a remote location comprising: at least one sealing plug for mechanically sealing the nozzle from the inside of the reactor pressure vessel. The sealing plug includes a plate and a cone assembly having an end part receptive in the nozzle, the plate being axially moveable relative to the cone assembly. The plate and cone assembly have confronting bevelled edges defining an opening therebetween. A primary O-ring is disposed about the opening and is supported on the bevelled edges, the plate being guidably mounted to the cone assembly for movement toward the cone assembly to radially expand the primary O-ring into sealing engagement with the nozzle. A means is included for providing relative movement between the outer plate and the cone assembly

  10. Comparative social grooming networks in captive chimpanzees and bonobos.

    Science.gov (United States)

    Rodrigues, Michelle A; Boeving, Emily R

    2018-06-21

    Despite similar dispersal patterns, models of Pan sociality emphasize sex differences in social bonding between the two species. Such disparities are attributed to hypothesized differences in environmental selective pressures that structure association patterns. However, recent research documents greater within-species variation in social bonds in both species. Here, we examine grooming networks in captive chimpanzees at the North Carolina Zoo, and captive bonobos at the Columbus Zoo. We hypothesized that male-female grooming relationships would be the strongest in both species, but that males and females of both species would not significantly differ between centrality, strength, or clustering. Via Mantel tests, we found that neither bonobos (t = - 0.070, r = - 0.009, two-tailed p = 0.942) nor chimpanzees (t = - 0.495, r = - 0.0939, two-tailed p = 0.6205) had significant differences in grooming between or within sexes. Neither species had significant sex differences in centrality, strength, or clustering. To account for idiosyncratic factors affecting grooming distribution, we examined the effect of origin, kinship, and group tenure on social network position. We found that wild-born bonobos exhibited greater eigenvector centrality (t = - 2.592, df = 9, p = 0.29) and strength (t = - 2.401; df = 9, p = 0.040), and group tenure was significantly correlated with strength (r = 0.608; N = 11, p - 0 = 0.47). None of these factors varied with social network position in chimpanzees. Our findings suggest that in captive settings, idiosyncratic factors related to individual history play a greater role in structuring social networks. Such variation may point to the behavioral flexibility inherent in fission-fusion networks, and mirror between-site variation found in wild chimpanzees. However, some idiosyncratic factors shaping captive networks may be an artifact of captivity.

  11. Establishment and maintenance of threatened long snouted seahorse, Hippocampus guttulatus, broodstock in captivity

    OpenAIRE

    Planas, Miguel; Chamorro, Alexandro; Quintas, Patricia; Vilar, Antonio

    2008-01-01

    Knowledge on seahorses is generally scarce but has been increasing in recent years due to their conservation status. Seahorse culture is a quite recent activity in most countries attempting it, and captive breeding techniques are available only for some species. With the aim of contributing to the development of breeding in captivity for conservative purposes, captive broodstock of the European long-snouted seahorse (Hippocampus guttulatus) was established with 32 wild seahorses captured in G...

  12. Detection of seal contamination in heat-sealed food packaging based on active infrared thermography

    Science.gov (United States)

    D'huys, Karlien; Saeys, Wouter; De Ketelaere, Bart

    2015-05-01

    In the food industry packaging is often applied to protect the product from the environment, assuring quality and safety throughout shelf life if properly performed. Packaging quality depends on the material used and the closure (seal). The material is selected based on the specific needs of the food product to be wrapped. However, proper closure of the package is often harder to achieve. One problem possibly jeopardizing seal quality is the presence of food particles between the seal. Seal contamination can cause a decreased seal strength and thus an increased packaging failure risk. It can also trigger the formation of microchannels through which air and microorganisms can enter and spoil the enclosed food. Therefore, early detection and removal of seal-contaminated packages from the production chain is essential. In this work, a pulsed-type active thermography method using the heat of the sealing bars as an excitation source was studied for detecting seal contamination. The cooling profile of contaminated seals was recorded. The detection performance of four processing methods (based on a single frame, a fit of the cooling profile, pulsed phase thermography and a matched filter) was compared. High resolution digital images served as a reference to quantify contamination. The lowest detection limit (equivalent diameter of 0.63 mm) and the lowest processing time (0.42 s per sample) were obtained for the method based on a single frame. Presumably, practical limitations in the recording stage prevented the added value of active thermography to be fully reflected in this application.

  13. Comparative Analysis of the Gut Microbiota Composition between Captive and Wild Forest Musk Deer

    Directory of Open Access Journals (Sweden)

    Yimeng Li

    2017-09-01

    Full Text Available The large and complex gut microbiota in animals has profound effects on feed utilization and metabolism. Currently, gastrointestinal diseases due to dysregulated gut microbiota are considered important factors that limit growth of the captive forest musk deer population. Compared with captive forest musk deer, wild forest musk deer have a wider feeding range with no dietary limitations, and their gut microbiota are in a relatively natural state. However, no reports have compared the gut microbiota between wild and captive forest musk deer. To gain insight into the composition of gut microbiota in forest musk deer under different food-source conditions, we employed high-throughput 16S rRNA sequencing technology to investigate differences in the gut microbiota occurring between captive and wild forest musk deer. Both captive and wild forest musk deer showed similar microbiota at the phylum level, which consisted mainly of Firmicutes and Bacteroidetes, although significant differences were found in their relative abundances between both groups. α-Diversity results showed that no significant differences occurred in the microbiota between both groups, while β-diversity results showed that significant differences did occur in their microbiota compositions. In summary, our results provide important information for improving feed preparation for captive forest musk deer and implementing projects where captive forest musk deer are released into the wild.

  14. Use of captive starlings to determine effects of pollutants on passerine reproduction

    Science.gov (United States)

    Grue, C.E.; Christian, C.L.; Lamb, D.W.; Kenaga, E.E.

    1981-01-01

    Three reproductive trials were conducted to develop techniques for propagation of captive starlings (Stumus vulgaris) which could determine the effects of environmental contaminants on passerine reproduction. Trials were conducted during the spring of 1979 in five adjacent 2.4 by 3 by 12-m outdoor wire pens containing four or ten pairs of starlings, a similar number of nest boxes, perches, water, commercial turkey starter, and alfalfa hay as nesting material. Nestling diets consisted of combinations of Nebraska Brand bird of prey diet, live or frozen mealworms (Tenebrio molitor) and crickets (Acheta domestica), or live earthworms (Pheretima sp.). Starlings reproduced successfully when the number of breeding pairs per pen was reduced from ten to four. The average clutch sizes for each pen (4.3 to 4.9) were similar to those reported for wild starlings. Hatching (60 to 90.4 percent) and fledging (0 to 100 percent) success varied among pens. The fledging success was greatest in the pens which received the most diverse nestling diets: Nebraska Brand diet plus frozen or live mealworms and crickets. Whether the insects were presented alive or frozen appeared to have little effect on the reproductive success. The starlings did not consume or carry earthworms to their young. The body weights of 20-day-old nestlings raised in captivity (X=73.9 g) were similar to those of starlings in the wild. The use of single pairs per pen may eliminate problems in presentation of nestling diets due to asynchrony in breeding between pairs and excessive interactions among individuals, which may interfere with parental care. The starling appears to be an excellent model for examining the effects of environmental contaminants on the reproduction of songbirds in captivity.

  15. Shaft Seal Compensates for Cold Flow

    Science.gov (United States)

    Myers, W. N.; Hein, L. A.

    1985-01-01

    Seal components easy to install. Ring seal for rotating or reciprocating shafts spring-loaded to compensate for slow yielding (cold flow) of sealing material. New seal relatively easy to install because components preassembled, then installed in one piece.

  16. Film riding seals for rotary machines

    Science.gov (United States)

    Bidkar, Rahul Anil; Sarawate, Neelesh Nandkumar; Wolfe, Christopher Edward; Ruggiero, Eric John; Raj Mohan, Vivek Raja

    2017-03-07

    A seal assembly for a rotary machine is provided. The seal assembly includes multiple sealing device segments disposed circumferentially intermediate to a stationary housing and a rotor. Each of the segments includes a shoe plate with a forward-shoe section and an aft-shoe section having one or more labyrinth teeth therebetween facing the rotor. The sealing device includes a stator interface element having a groove or slot for allowing disposal of a spline seal for preventing segment leakages. The sealing device segment also includes multiple bellow springs or flexures connected to the shoe plate and to the stator interface element. Further, the sealing device segments include a secondary seal integrated with the stator interface element at one end and positioned about the multiple bellow springs or flexures and the shoe plate at the other end.

  17. Tucannon River spring chinook salmon captive brood program, FY 2000 annual report; ANNUAL

    International Nuclear Information System (INIS)

    Bumgarner, Joseph D.; Gallinat, Michael P.

    2001-01-01

    This report summarizes the objectives, tasks, and accomplishments of the Tucannon River spring chinook captive brood program from program inception (1997) through April 2001. The WDFW initiated a captive broodstock program in 1997. The overall goal of the Tucannon River captive broodstock program is for the short-term, and eventually long-term, rebuilding of the Tucannon River spring chinook salmon run, with the hope that natural production will eventually sustain itself. The project goal is to rear captive salmon to adults, spawn them, rear their progeny, and release approximately 150,000 smolts annually into the Tucannon River between 2003-2007. These smolt releases, in combination with the current hatchery supplementation program (132,000 smolts), and wild production, is expected to produce 600-700 returning adult spring chinook to the Tucannon River each year from 2005-2010. The Master Plan, Environmental Assessment, and most facility modifications at LFH were completed for the Tucannon River spring chinook captive broodstock program during FY2000 and FY2001. DNA samples collected since 1997 have been sent to the WDFW genetics lab in Olympia for baseline DNA analysis. Results from the genetic analysis are not available at this time. The captive broodstock program is planned to collect fish from five (1997-2001) brood years (BY). The captive broodstock program was initiated with 1997 BY juveniles, and the 2000 BY fish have been selected. As of April 30, 2001, WDFW has 172 BY 1997, 262 BY 1998, 407 BY 1999, and approximately 1,190 BY 2000 fish on hand at LFH. Twelve of 13 mature 97 BY females were spawned in 2000. Total eggtake was 14,813. Mean fecundity was 1,298 eggs/female based on 11 fully spawned females. Egg survival to eye-up was 47.3%. This low survival was expected for three year old captive broodstock females. As of April 30, 2001, WDFW has 4,211 captive broodstock progeny on hand. These fish will be tagged with blank wire tag without fin clips and

  18. Low-Torque Seal Development

    Science.gov (United States)

    Lattime, Scott B.; Borowski, Richard

    2009-01-01

    The EcoTurn Class K production prototypes have passed all AAR qualification tests and received conditional approval. The accelerated life test on the second set of seals is in progress. Due to the performance of the first set, no problems are expected.The seal has demonstrated superior performance over the HDL seal in the test lab with virtually zero torque and excellent contamination exclusion and grease retention.

  19. Gastrointestinal and blood parasite determination in the guanaco (Lama guanicoe) under semi-captivity conditions.

    Science.gov (United States)

    Correa, Loreto; Zapata, Beatriz; Soto-Gamboa, Mauricio

    2012-01-01

    The breeding of wild animals for commercial purposes is becoming more frequent nowadays. This situation has led to an increase in contact rates between wild and domestic animals, with subsequent reciprocal transmission of parasites. In this study, we characterized the gastrointestinal and blood parasites of a group of 15 semi-captive guanacos (Lama guanicoe). We characterized gastrointestinal parasites by analyzing fecal samples through the sedimentation-flotation technique and hemoparasites by using blood smears stained with Giemsa. We found several gastrointestinal parasites including Nematoda and protozoans. The most frequently found parasites were Nematodirus sp. and Eimeria sp. In contrast with previous studies, neither Cestoda nor Fasciola were found. The only hemoparasite detected was Mycoplasma haemolamae, a parasite already described in llamas and alpacas. We conclude that the most frequent gastrointestinal parasites of semi-captive guanacos were nematodes and protozoans. Also, the hemoparasite M. haemolamae seems to be prevalent among captive populations of South American camelids. Finally, captive guanacos share several parasites with the traditional livestock. Therefore, keeping captive or semi-captive guanacos without an adequate sanitary protocol might have adverse consequences to adjacent traditional cattle farming and/or for wild animals.

  20. Refrigeration system with clearance seals

    International Nuclear Information System (INIS)

    Holland, N. J.

    1985-01-01

    In a refrigeration system such as a split Stirling system, fluid seals associated with the reciprocating displacer are virtually dragless clearance seals. Movement of the displacer relative to the pressure variations in the working volume of gas is retarded by a discrete braking element. Because it is not necessary that the brake providing any sealing action, the brake can be designed for greater durability and less dependence on ambient and operating temperatures. Similarly, the clearance seal can be formed of elements having low thermal expansion such that the seal is not temperature dependent. In the primary embodiments the braking element is a split friction brake

  1. Reactor cavity seal ring

    International Nuclear Information System (INIS)

    Hankinson, M.F.

    1986-01-01

    A hydrostatic seal is described for sealing an annular gap between two flat substantially horizontal coplanar surfaces comprising, in combination: a generally flat annular plate of a width sufficient to span a gap between two surfaces: compressible annular sealing means disposed on the bottom surface of the flat annular plate for sealingly engaging the two flat surfaces in response to a downward force exerted on the plate; and fastening means, distributed along the center line of the plate, for releasably fastening the plate in a position to span the gap to be sealed and exert a downward force on the plate, each fastening means including a pair of elongated members of a size to fit into the gap to be sealed, means for mounting the members on the bottom surface of the plate so that at least a portion of each member is radially moveable in a direction toward a respective one of the vertical side surfaces defining the gap to be sealed to engage same and so that the plate is moveable relative to the members in a downward direction in response to hydrostatic pressure applied to the upper surface of the plate when the members are engaging the vertical side surfaces of an annular gap, and an actuating means, mounted on the plate for movement therewith in response to hydrostatic pressure, for radially moving the members, the actuating means extending through a bore in the plate to the upper surface of the plate

  2. Genetic evaluation of the captive breeding program of the Persian wild ass

    DEFF Research Database (Denmark)

    Nielsen, R.K.; Pertoldi, C.; Loeschcke, Volker

    2007-01-01

    During the last century, many species have become endangered and conservation in terms of captive breeding has been crucial for their survival. Classical management of captive species is based on recorded genealogies. However, if pedigrees are incomplete or inaccurate, it can bias...

  3. The disadvantages of mating outside home: How breeding in captivity affects the reproductive success of seahorses?

    Science.gov (United States)

    Faleiro, Filipa; Narciso, Luís

    2013-04-01

    In captivity, husbandry conditions are distinct from those experienced by fish in the wild and may have a significant effect on reproductive success. This study evaluates the effect of supportive breeding (i.e., breeding animals in captivity using wild parents) on some quantitative and qualitative aspects of the reproductive success of the long-snouted seahorse, Hippocampus guttulatus. Wild and captive broods were compared in terms of juvenile number, size, condition and fatty acid profile at birth. Reproductive investment and breeding success of H. guttulatus decreased considerably in captivity. Juveniles from captive broods were fewer in number, smaller, generally thinner and with lower fatty acid contents (per juvenile) than those from wild broods, although their fatty acid composition (μg mg- 1 DW or %TFA) was not significantly affected. Although not greatly encouraging, the poor reproductive performance of captive seahorses should not, however, efface the potential of supportive breeding as a tool for seahorse conservation. Enhanced conditions and long-term breeding in captivity will allow to improve the reproductive success of the species and the quality of the fingerlings.

  4. Assessing welfare of individual sirenians in the wild and in captivity

    Science.gov (United States)

    Flint, Mark; Bonde, Robert K.

    2017-01-01

    Assessing the welfare of wild populations of sirenians has required a “generalist” approach. The outcome has been a subjective decision as to whether what the observers are witnessing in an individual or group of animals is normal and whether that has positive or negative consequences. The understanding of sirenian welfare requirements, and a decision process for whether to support and maintain their natural habitats or to try to replicate it in a meaningful way in an artificial captive setting, is still in its early developmental stages and has dynamic qualities that are in need of urgent attention. In this chapter we use the knowledge and observations presented throughout the chapters on sirenians to outline a proposed standard approach for assessing welfare in individuals in wild populations, as well as guidelines for assessing captive groups of dugongs and manatees. In the wild, the suitability of the habitat and human impact on it, the limitations of carrying capacity, the dynamics of ecosystems, and the effects that the immediate environment will have on the known resident populations are examined. In captivity, we use the foundation of the Five Freedoms, based on experience derived from other captive species, and we combine this with experience from rehabilitating manatees in Europe and the United States and, more recently, dugongs in the Indo-Pacific, to identify requirements and to help us to assess the unique needs of these species when held in facilities. We present considerations and approaches to (1) holistically assess captive facilities and to assess the well-being of the individuals held in the facility, (2) derive a guideline for standard captive assessment, (3) determine if adequate welfare needs for the animals are being met, and (4) help to provide guidance on whether an animal is suitable for release after rehabilitation.

  5. Design considerations for mechanical face seals

    Science.gov (United States)

    Ludwig, L. P.; Greiner, H. F.

    1980-01-01

    Two companion reports deal with design considerations for improving performance of mechanical face seals, one of family of devices used in general area of fluid sealing of rotating shafts. One report deals with basic seal configuration and other with lubrication of seal.

  6. An investigation into the prevalence of exploratory behavior in captive cheetahs (Acinonyx jubatus).

    Science.gov (United States)

    Quirke, Thomas; O'Riordan, Ruth

    2015-01-01

    Exploratory behavior in the wild is fundamentally linked to an animal's survival and natural life history. The ability to gather information about their environment, establish territories, assert dominance, communicate information regarding reproductive status and locate mates are closely associated with a range of exploratory behaviors. Understanding how these behaviors are performed within the captive setting is crucial in order to create a captive environment in which these behaviors can be expressed, and their function conserved. The objective of this research was to highlight the factors of captive husbandry and management that influence the occurrence of exploratory behaviour of cheetahs (Acinonyx jubatus) in captivity. One hundred and twelve cheetahs in 88 enclosures across nine zoological institutions in five countries were the subjects of this study. The presence of raised areas, number of movements between enclosures, group composition, sex and an interaction between group composition and the ability to view cheetahs in adjacent enclosures, all significantly influenced the prevalence of exploratory behavior in captive cheetahs. The presence of raised areas and an increasing number of movements between enclosures significantly increased the probability of observing exploratory behaviour, while this probability was significantly decreased for female cheetahs, when cheetahs were able to view conspecifics in adjacent enclosures, and were maintained in groups. A number of recommendations are discussed in relation to promoting exploratory behavior in captive cheetahs. © 2014 Wiley Periodicals, Inc.

  7. EBR-II rotating plug seal maintenance

    International Nuclear Information System (INIS)

    Allen, K.J.

    1986-01-01

    The EBR-II rotating plug seals require frequent cleaning and maintenance to keep the plugs from sticking during fuel handling. Time consuming cleaning on the cover gas and air sides of the dip ring seal is required to remove oxidation and sodium reaction products that accumulate and stop plug rotation. Despite severely limited access, effective seal cleaning techniques have removed 11 800 lb (5 352 kg) of deposits from the seals since 1964. Temperature control modifications and repairs have also required major maintenance work. Suggested seal design recommendations could significantly reduce maintenance on future similar seals

  8. PENINGKATAN KOMPETENSI GURU MELALUI WORKSHOP PENYUSUNAN SOAL DIGITAL BAHASA JAWA DENGAN MENGGUNAKAN PROGRAM ADOBE CAPTIVATE

    Directory of Open Access Journals (Sweden)

    Joko Sukoyo

    2013-02-01

    Full Text Available Kegiatan workshop ini dilakukan dengan tujuan untuk meningkatkan kemampuan guru sekolah dasar di Kecamatan Semarang Utara dalam hal penyusunan soal digital bahasa Jawa dengan menggunakan program adobe captivate. Metode yang digunakan dalam kegiatan ini adalah: ceramah, demonstrasi, praktik langsung, tanya jawab, dan penugasan. Peserta yang mengikuti workshop sebanyak 47 guru SD di Kecamatan Semarang Utara. Materi yang diberikan kepada peserta meliputi pengenalan program adobe captivate, penginstalan program adobe captivate, dan penulisan soal digital bahasa Jawa dengan menggunakan program adobe captivate. Kegiatan workshop ini berdampak positif kepada guru-guru SD di Kecamatan Semarang Utara. Sebelum diadakan kegiatan workshop, mereka sama sekali tidak dapat membuat soal digital dengan program adobe captivate. Setelah diadakan kegiatan worshop dan diadakan evaluasi terjadi peningkatan yang sangat signifikan, lebih dari 75% dapat membuat soal digital.

  9. Tamper-indicating quantum optical seals

    Energy Technology Data Exchange (ETDEWEB)

    Humble, Travis S [ORNL; Williams, Brian P [ORNL

    2015-01-01

    Confidence in the means for identifying when tampering occurs is critical for containment and surveillance technologies. Fiber-optic seals have proven especially useful for actively surveying large areas or inventories due to the extended transmission range and flexible layout of fiber. However, it is reasonable to suspect that an intruder could tamper with a fiber-optic sensor by accurately replicating the light transmitted through the fiber. In this contribution, we demonstrate a novel approach to using fiber-optic seals for safeguarding large-scale inventories with increased confidence in the state of the seal. Our approach is based on the use of quantum mechanical phenomena to offer unprecedented surety in the authentication of the seal state. In particular, we show how quantum entangled photons can be used to monitor the integrity of a fiber-optic cable - the entangled photons serve as active sensing elements whose non-local correlations indicate normal seal operation. Moreover, we prove using the quantum no-cloning theorem that attacks against the quantum seal necessarily disturb its state and that these disturbances are immediately detected. Our quantum approach to seal authentication is based on physical principles alone and does not require the use of secret or proprietary information to ensure proper operation. We demonstrate an implementation of the quantum seal using a pair of entangled photons and we summarize our experimental results including the probability of detecting intrusions and the overall stability of the system design. We conclude by discussing the use of both free-space and fiber-based quantum seals for surveying large areas and inventories.

  10. Repository Closure and Sealing Approach

    International Nuclear Information System (INIS)

    A.T. Watkins

    2000-01-01

    The scope of this analysis will be to develop the conceptual design of the closure seals and their locations in the Subsurface Facilities. The design will be based on the recently established program requirements for transitioning to the Site Recommendation (SR) design as outlined by ''Approach to Implementing the Site Recommendation Baseline'' (Stroupe 2000) and the ''Monitored Geologic Repository Project Description Document'' (CRWMS M andO 1999b). The objective of this analysis will be to assist in providing a description for the Subsurface Facilities System Description Document, Section 2 and finally to document any conclusions reached in order to contribute and provide support to the SR. This analysis is at a conceptual level and is considered adequate to support the SR design. The final closure barriers and seals for the ventilation shafts, and the north and south ramps will require these openings to be permanently sealed to limit excessive air and water inflows and prevent human intrusion. The major tasks identified with closure in this analysis are: (1) Developing the overall subsurface seal layout and identifying design and operational interfaces for the Subsurface Facilities. (2) Summarizing the general site conditions and general rock characteristic with respect to seal location and describing the seal selected. (3) Identify seal construction materials, methodology of construction and strategic locations including design of the seal and plugs. (4) Discussing methods to prevent human intrusion

  11. Blood values in wild and captive Komodo dragons (Varanus komodoensis).

    Science.gov (United States)

    Gillespie, Don; Frye, Frederic L.; Stockham, Steven L.; Fredeking, Terry

    2000-01-01

    The Komodo dragon (Varanus komodoensis) is the largest living lizard and occupies a range smaller than that of any other large carnivore in the world. Samples from 33 free-ranging animals at five localities in Komodo National Park, Indonesia were evaluated to assess underlying health problems. To build a comparative database, samples from 44 Komodo dragons in both Indonesian and U.S. zoos were also analyzed. Tests performed included complete blood counts, clinical chemistry profiles, vitamin A, D(3), and E analyses, mineral levels, and screening for chlorinated pesticides or other toxins in wild specimens. Blood samples from wild dragons were positive for hemogregarines, whereas captive specimens were all negative. Total white blood cell counts were consistently higher in captive Komodo dragons than in wild specimens. Reference intervals were established for some chemistry analytes, and values obtained from different groups were compared. Vitamin A and E ranges were established. Vitamin D(3) levels were significantly different in Komodo dragons kept in captive, indoor exhibits versus those with daily ultraviolet-B exposure, whether captive or wild specimens. Corrective measures such as ultraviolet-permeable skylights, direct sunlight exposure, and self-ballasted mercury vapor ultraviolet lamps increased vitamin D(3) concentrations in four dragons to levels comparable with wild specimens. Toxicology results were negative except for background-level chlorinated pesticide residues. The results indicate no notable medical, nutritional, or toxic problems in the wild Komodo dragon population. Problems in captive specimens may relate to, and can be corrected by, husbandry measures such as regular ultraviolet-B exposure. Zoo Biol 19:495-509, 2000. Copyright 2000 Wiley-Liss, Inc.

  12. Amphibious hearing in ringed seals (Pusa hispida): underwater audiograms, aerial audiograms and critical ratio measurements.

    Science.gov (United States)

    Sills, Jillian M; Southall, Brandon L; Reichmuth, Colleen

    2015-07-01

    Ringed seals (Pusa hispida) are semi-aquatic marine mammals with a circumpolar Arctic distribution. In this study, we investigate the amphibious hearing capabilities of ringed seals to provide auditory profiles for this species across the full range of hearing. Using psychophysical methods with two trained ringed seals, detection thresholds for narrowband signals were measured under quiet, carefully controlled environmental conditions to generate aerial and underwater audiograms. Masked underwater thresholds were measured in the presence of octave-band noise to determine critical ratios. Results indicate that ringed seals possess hearing abilities comparable to those of spotted seals (Phoca largha) and harbor seals (Phoca vitulina), and considerably better than previously reported for ringed and harp seals. Best sensitivity was 49 dB re. 1 µPa (12.8 kHz) in water, and -12 dB re. 20 µPa (4.5 kHz) in air, rivaling the acute hearing abilities of some fully aquatic and terrestrial species in their respective media. Critical ratio measurements ranged from 14 dB at 0.1 kHz to 31 dB at 25.6 kHz, suggesting that ringed seals--like other true seals--can efficiently extract signals from background noise across a broad range of frequencies. The work described herein extends similar research on amphibious hearing in spotted seals recently published by the authors. These parallel studies enhance our knowledge of the auditory capabilities of ice-living seals, and inform effective management strategies for these and related species in a rapidly changing Arctic environment. © 2015. Published by The Company of Biologists Ltd.

  13. Air riding seal with purge cavity

    Science.gov (United States)

    Sexton, Thomas D; Mills, Jacob A

    2017-08-15

    An air riding seal for a turbine in a gas turbine engine, where an annular piston is axial moveable within an annular piston chamber formed in a stator of the turbine and forms a seal with a surface on the rotor using pressurized air that forms a cushion in a pocket of the annular piston. A purge cavity is formed on the annular piston and is connected to a purge hole that extends through the annular piston to a lower pressure region around the annular piston or through the rotor to an opposite side. The annular piston is sealed also with inner and outer seals that can be a labyrinth seal to form an additional seal than the cushion of air in the pocket to prevent the face of the air riding seal from overheating.

  14. Seals in nuclear reactors

    International Nuclear Information System (INIS)

    1979-01-01

    The aim of this invention is the provision of improved seals for reactor vessels in which fuel assemblies are located together with inlets and outlets for the circulation of a coolant. The object is to provide a seal arrangement for the rotatable plugs of nuclear reactor closure heads which has good sealing capacities over a wide gap during operation of the reactor but which also permits uninhibited rotation of the plugs for maintenance. (U.K.)

  15. Vented chest seals for prevention of tension pneumothorax in a communicating pneumothorax.

    Science.gov (United States)

    Kotora, Joseph G; Henao, Jose; Littlejohn, Lanny F; Kircher, Sara

    2013-11-01

    Tension pneumothorax accounts for 3%-4% of combat casualties and 10% of civilian chest trauma. Air entering a wound via a communicating pneumothorax rather than by the trachea can result in respiratory arrest and death. In such cases, the Committee on Tactical Combat Casualty Care advocates the use of unvented chest seals to prevent respiratory compromise. A comparison of three commercially available vented chest seals was undertaken to evaluate the efficacy of tension pneumothorax prevention after seal application. A surgical thoracostomy was created and sealed by placing a shortened 10-mL syringe barrel (with plunger in place) into the wound. Tension pneumothorax was achieved via air introduction through a Cordis to a maximum volume of 50 mL/kg. A 20% drop in mean arterial pressure or a 20% increase in heart rate confirmed hemodynamic compromise. After evacuation, one of three vented chest seals (HyFin(®), n = 8; Sentinel(®), n = 8, SAM(®), n = 8) was applied. Air was injected to a maximum of 50 mL/kg twice, followed by a 10% autologous blood infusion, and finally, a third 50 mL/kg air bolus. Survivors completed all three interventions, and a 15-min recovery period. The introduction of 29.0 (±11.5) mL/kg of air resulted in tension physiology. All three seals effectively evacuated air and blood. Hemodynamic compromise failed to develop with a chest seal in place. HyFin(®), SAM(®), and Sentinel(®) vented chest seals are equally effective in evacuating blood and air in a communicating pneumothorax model. All three prevented tension pneumothorax formation after penetrating thoracic trauma. Published by Elsevier Inc.

  16. Leptospirosis on captive wild animals in Latin America.

    Science.gov (United States)

    Vieira, Anahi S; Lilenbaum, Walter

    2017-12-01

    Leptospirosis is a worldwide bacterial infection, being more prevalent in tropical regions. Human beings, domestic animals and wildlife species are susceptible to a wide variety of serovars. Zoos have a great importance in keeping endangered species, increasing populations and accumulating knowledge on these species. Although some studies describe the occurrence of leptospirosis in captivity animals, a systematic review regarding the infection in these animals in tropical areas has never been conducted. Thus, the objective of this study was to systematically gather and analyze data regarding leptospirosis among captive wild animals in Latin America. A total of 141 species were studied, 93 genus, 44 families and 15 orders from three classes. Median seroprevalence ranged from 0 to 52% and predominant serogroups were Canicola and Icterohaemorrhagiae for mammalian, and Sejroe for reptiles. One important outcome is that, when kept on zoos, wildlife is more frequently infected by incidental strains instead of adapted strains. Preventive measures should consider periodic serosurvey of all animal species in captivity, as well as the use of commercial vaccines to reduce leptospiral infection and its hazards. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Parasitic fauna of captive snakes in Tamilnadu, India

    Directory of Open Access Journals (Sweden)

    Nakulan Valsala Rajesh

    2015-07-01

    Full Text Available Objective: To study the parasitic fauna on serpentines under captive condition in zoological park of Tamilnadu, India. Methods: Fecal samples were collected from (n = 247 serpentines, Arignar Anna Zoological Park (n = 22, Vandalur, Tamilnadu, India and Snake Park (n = 27, Guindy, Tamilnadu, India and screened for endoparasites using sedimentation techniques. Ectoparasites were also reported in this study. Results: Coprological examination (n = 247 from captive snakes (n = 49 on random analysis revealed strongyles were predominant in Arignar Anna Zoological Park, Vandalur and Snake Park, Guindy, however the parasites were absent in king cobras (Ophiophagus hannah. Eggs of Capillaria sp. showed less predominance in Vandalur and Gunidy. Rat snakes [Ptyas mucosus (P. mucosus] showed higher prevalence of strongyle infection in Vandalur, and Russell’s viper (Daboia russelii showed higher prevalence in Guindy. Study on ectoparasites revealed Aponomma gerviasii ticks in P. mucosus, Indian cobras (Naja naja, king cobras (Ophiophagus hannah, reticulated pythons (Python reticulates and Indian rock pythons (Python molurus, among them, the most heavy infestation was documented in P. mucosus (n = 9. Conclusions: Confinement favour stress and dysecdysis in captive condition affect the health status of snakes in zoological park.

  18. Self-acting and hydrodynamic shaft seals

    Science.gov (United States)

    Ludwig, L. P.

    1973-01-01

    Self-acting and hydrodynamic seals are described. The analytical procedures are outlined for obtaining a seal force balance and the operating film thickness. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis revealed three different vibration modes. Proposed applications of self-acting seals in gas turbine engines and in rocket vehicle turbopumps are described. Also experimental data on self-acting face seals operating under simulated gas turbine conditions are given; these data show the feasibility of operating the seal at conditions of 345 newtons per square centimeter (500 psi) and 152 meters per second (500 ft/sec) sliding speed.

  19. Radial lip seals, thermal aspects

    NARCIS (Netherlands)

    Stakenborg, M.J.L.; van Ostaijen, R.A.J.; Dowson, D.

    1989-01-01

    In this paper the influence of temperature on tne seal-snarc contact is studied, using coupled temperature-stress FEH analysis. A thermal network model is used to calculate the seal-shaft contact temperature for steady-state and transient conditions. Contact temperatures were measured under the seal

  20. Airfoil seal system for gas turbine engine

    Science.gov (United States)

    None, None

    2013-06-25

    A turbine airfoil seal system of a turbine engine having a seal base with a plurality of seal strips extending therefrom for sealing gaps between rotational airfoils and adjacent stationary components. The seal strips may overlap each other and may be generally aligned with each other. The seal strips may flex during operation to further reduce the gap between the rotational airfoils and adjacent stationary components.

  1. Analysis on the Viscous Pumping in a Magnetic Fluid Seal Under a Rotating Load and the Seal Design

    OpenAIRE

    長屋, 幸助; 大沼, 浩身; 佐藤, 淳

    1990-01-01

    This paper discusses effects of viscous pumping in a magnetic fluid seal under a rotating load. The Reynolds equation was presented for the seal based on magnetic fluid mechanics, and the expressions for obtaining pressures in the seal, eccentricities of the rotating shaft due to the viscous pumping and seal pressures were given. Numerical Calculations were carried out for some sample problems, and the effect of magnetic flux densities on the pressure in the seal and the seal pressures were c...

  2. Albinistic common seals (Phoca vitulina) and melanistic grey seals (Halichoerus grypus) rehabilitated in the Netherlands

    NARCIS (Netherlands)

    Osinga, Nynke; 't Hart, Pieter; Vader, Pieter C. van Voorst

    2010-01-01

    The Seal Rehabilitation and Research Centre (SRRC) in Pieterburen, The Netherlands, rehabilitates seals from the waters of the Wadden Sea, North Sea and Southwest Delta area. Incidental observations of albinism and melanism in common and grey seals are known from countries surrounding the North Sea.

  3. Enhanced sealing project: monitoring the THM response of a full-scale shaft seal

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, D.A.; Martino, J.B.; Holowick, B.; Priyanto, D. [Atomic Energy of Canada Limited, Pinawa, MB (Canada)

    2011-07-01

    Closure of the subsurface facilities at Atomic Energy of Canada Limited's (AECL) Underground Research Laboratory (URL) was completed in 2010 with installation of a concrete surface cap. Additionally, as part of decommissioning, seals were installed at the penetration of the shafts through the major hydro-geological feature known as Fracture Zone 2 (FZ2). The seal construction was funded by Natural Resources Canada (NRCan) under the Nuclear Legacy Liabilities Program (NLLP). The shaft seals at the URL were based on the composite seal concept developed for application in a deep geological repository for disposal of used nuclear fuel. The access shaft seal consists of two 3-m thick concrete segments that rigidly confine a 6-m long section of swelling clay-based material (40% bentonite clay - 60% sand by dry mass). Monitoring of the regional groundwater recovery following flooding of the lower shaft is a closure requirement and was included in the design. It was widely recognized that the installation of the seals at the URL represented a unique opportunity to monitor the evolution of the type of seal that might be installed in an actual repository but the NLLP mandate did not include any monitoring of shaft seal evolution. As a result the Enhanced Sealing Project (ESP) partnership composed of NWMO, Posiva, SKB and ANDRA was established and a set of 68 instruments (containing 100 sensors) were installed to monitor the evolution of the seal. In the first year of operation sensors have monitored the following parameters in the ESP: thermal evolution and strain of the concrete components, thermal, hydraulic and mechanical changes in the clay component and its contacts with the rock and concrete confinement. Additionally, monitoring of the near-field and regional groundwater evolution has been undertaken. Monitoring of the short-term thermal-mechanical evolution of the concrete components was successfully accomplished and only a small temperature rise occurred due to

  4. Enhanced sealing project: monitoring the THM response of a full-scale shaft seal

    International Nuclear Information System (INIS)

    Dixon, D.A.; Martino, J.B.; Holowick, B.; Priyanto, D.

    2011-01-01

    Closure of the subsurface facilities at Atomic Energy of Canada Limited's (AECL) Underground Research Laboratory (URL) was completed in 2010 with installation of a concrete surface cap. Additionally, as part of decommissioning, seals were installed at the penetration of the shafts through the major hydro-geological feature known as Fracture Zone 2 (FZ2). The seal construction was funded by Natural Resources Canada (NRCan) under the Nuclear Legacy Liabilities Program (NLLP). The shaft seals at the URL were based on the composite seal concept developed for application in a deep geological repository for disposal of used nuclear fuel. The access shaft seal consists of two 3-m thick concrete segments that rigidly confine a 6-m long section of swelling clay-based material (40% bentonite clay - 60% sand by dry mass). Monitoring of the regional groundwater recovery following flooding of the lower shaft is a closure requirement and was included in the design. It was widely recognized that the installation of the seals at the URL represented a unique opportunity to monitor the evolution of the type of seal that might be installed in an actual repository but the NLLP mandate did not include any monitoring of shaft seal evolution. As a result the Enhanced Sealing Project (ESP) partnership composed of NWMO, Posiva, SKB and ANDRA was established and a set of 68 instruments (containing 100 sensors) were installed to monitor the evolution of the seal. In the first year of operation sensors have monitored the following parameters in the ESP: thermal evolution and strain of the concrete components, thermal, hydraulic and mechanical changes in the clay component and its contacts with the rock and concrete confinement. Additionally, monitoring of the near-field and regional groundwater evolution has been undertaken. Monitoring of the short-term thermal-mechanical evolution of the concrete components was successfully accomplished and only a small temperature rise occurred due to

  5. 19 CFR 113.25 - Seals.

    Science.gov (United States)

    2010-04-01

    ... signatures of principal and surety, if individuals, and the corporate seal shall be affixed close to the... law of the state in which executed. However, when the charter or governing statute of a corporation requires its acts to be evidenced by its corporate seal, such seal is required. ...

  6. Microplastic Contamination of Wild and Captive Flathead Grey Mullet (Mugil cephalus)

    Science.gov (United States)

    Lui, Ching Yee

    2018-01-01

    A total of 60 flathead grey mullets were examined for microplastic ingestion. Thirty wild mullets were captured from the eastern coast of Hong Kong and 30 captive mullets were obtained from fish farms. Microplastic ingestion was detected in 60% of the wild mullets, with an average of 4.3 plastic items per mullet, while only 16.7% of captive mullets were found to have ingested microplastics, with an average of 0.2 items per mullet. The results suggested that wild mullets have a higher risk of microplastic ingestion than their captive counterparts. The most common plastic items were fibres that were green in colour and small in size (microplastics was positively correlated with larger body size among the mullets. PMID:29587444

  7. Diet Versus Phylogeny: a Comparison of Gut Microbiota in Captive Colobine Monkey Species.

    Science.gov (United States)

    Hale, Vanessa L; Tan, Chia L; Niu, Kefeng; Yang, Yeqin; Knight, Rob; Zhang, Qikun; Cui, Duoying; Amato, Katherine R

    2018-02-01

    Both diet and host phylogeny shape the gut microbial community, and separating out the effects of these variables can be challenging. In this study, high-throughput sequencing was used to evaluate the impact of diet and phylogeny on the gut microbiota of nine colobine monkey species (N = 64 individuals). Colobines are leaf-eating monkeys that fare poorly in captivity-often exhibiting gastrointestinal (GI) problems. This study included eight Asian colobines (Rhinopithecus brelichi, Rhinopithecus roxellana, Rhinopithecus bieti, Pygathrix nemaeus, Nasalis larvatus, Trachypithecus francoisi, Trachypithecus auratus, and Trachypithecus vetulus) and one African colobine (Colobus guereza). Monkeys were housed at five different captive institutes: Panxi Wildlife Rescue Center (Guizhou, China), Beijing Zoo, Beijing Zoo Breeding Center, Singapore Zoo, and Singapore Zoo Primate Conservation Breeding Center. Captive diets varied widely between institutions, but within an institution, all colobine monkey species were fed nearly identical or identical diets. In addition, four monkey species were present at multiple captive institutes. This allowed us to parse the effects of diet and phylogeny in these captive colobines. Gut microbial communities clustered weakly by host species and strongly by diet, and overall, colobine phylogenetic relationships were not reflected in gut microbiota analyses. Core microbiota analyses also identified several key taxa-including microbes within the Ruminococcaceae and Lachnospiraceae families-that were shared by over 90% of the monkeys in this study. Microbial species within these families include many butyrate producers that are important for GI health. These results highlight the importance of diet in captive colobines.

  8. Upgrading primary heat transport pump seals

    International Nuclear Information System (INIS)

    Graham, T.; Metcalfe, R.; Rhodes, D.; McInnes, D.

    1995-01-01

    Changes in the operating environment at the Bruce-A Nuclear Generating Station created the need for an upgraded Primary Heat Transport Pump (PHTP) seal. In particular, the requirement for low pressure running during more frequent start-ups exposed a weakness of the CAN2 seal and reduced its reliability. The primary concern at Bruce-A was the rotation of the CAN2 No. 2 stators in their holders. The introduction of low pressure running exacerbated this problem, giving rapid wear of the stator back face, overheating, and thermocracking. In addition, the resulting increase in friction between the stator and its holder increased stationary-side hysteresis and thereby changed the seal characteristic to the point where interseal pressure oscillations became prevalent. The resultant increased hysteresis also led to hard rubbing of the seal faces during temperature transients. An upgraded seal was required for improved reliability to avoid forced outages and to reduce maintenance costs. This paper describes this upgraded 'replacement seal' and its performance history. In spite of the 'teething' problems detailed in this paper, there have been no forced outages due to the replacement seal, and in the words of a seal maintenance worker at Bruce-A, 'it allows me to go home and sleep at night instead of worrying about seal failures.' (author)

  9. Advanced High Temperature Structural Seals

    Science.gov (United States)

    Newquist, Charles W.; Verzemnieks, Juris; Keller, Peter C.; Rorabaugh, Michael; Shorey, Mark

    2002-10-01

    This program addresses the development of high temperature structural seals for control surfaces for a new generation of small reusable launch vehicles. Successful development will contribute significantly to the mission goal of reducing launch cost for small, 200 to 300 pound payloads. Development of high temperature seals is mission enabling. For instance, ineffective control surface seals can result in high temperature (3100 F) flows in the elevon area exceeding structural material limits. Longer sealing life will allow use for many missions before replacement, contributing to the reduction of hardware, operation and launch costs.

  10. Upgrading inflatable door seals

    International Nuclear Information System (INIS)

    Sykes, T.M.; Metcalfe, R.; Welch, L.A.; Josefowich, J.M.

    1997-01-01

    Inflatable door seals are used for airlocks in CANDU stations. They have been a significant source of unreliability and maintenance cost. A program is underway to improve their performance and reliability, backed by environmental qualification testing. Only commercial products and suppliers existed in 1993. For historical reasons, these 'existing products' did not use the most durable material then available. In hindsight, neither had they been adapted nor optimized to combat conditions often experienced in the plants-sagging doors, damaged sealing surfaces, and many thousands of openings and closings per year. Initial attempts to involve the two existing suppliers in efforts to upgrade these seals were unsuccessful. Another suitable supplier had therefore to be found, and a 'new,' COG-owned seal developed; this was completed in 1997. This paper summarizes its testing, along with that of the two existing products. Resistance to aging has been improved significantly. Testing has shown that an accident can be safely withstood after 10 years of service or 40,000 openings-closings, whichever comes first. AECL's Fluid Sealing Technology Unit (FSTU) has invested in the special moulds, test fixtures and other necessary tooling and documentation required to begin commercial manufacture of this new quality product. Accordingly, as with FSTU's other nuclear products such as pump seals, the long-term supply of door seals to CANDU plants is now protected from many external uncertainties-e.g., commercial products being discontinued, materials being changed, companies going out of business. Manufacturing to AECL's detailed specifications is being subcontracted to the new supplier. FSTU is performing the quality surveillance, inspection, testing, and customer service activities concomitant with direct responsibility for supply to the plants. (author)

  11. Fiber Optic Safeguards Sealing System

    Science.gov (United States)

    1978-01-01

    8217 or trade names does not constitute an official indorsement or approval of the use thereof. Destroy this report when it is no longer needed. Do not...an intergrity check of a seal than to photograph the seal’s fingerprints and to match positive/negative overlays. The seal identification time and

  12. Oxidative stress, activity behaviour and body mass in captive parrots

    OpenAIRE

    Larcombe, S. D.; Tregaskes, C. A.; Coffey, J.; Stevenson, A. E.; Alexander, L. G.; Arnold, K. E.

    2015-01-01

    Many parrot species are kept in captivity for conservation, but often show poor reproduction, health and survival. These traits are known to be influenced by oxidative stress, the imbalance between the production of reactive oxygen species (ROS) and ability of antioxidant defences to ameliorate ROS damage. In humans, oxidative stress is linked with obesity, lack of exercise and poor nutrition, all of which are common in captive animals. Here, we tested whether small parrots (budgerigars, Melo...

  13. Sexual exchange relationships in captive chimpanzees

    NARCIS (Netherlands)

    Hemelrijk, C.K.; Van Laere, G.J.; Van Hooff, J.A.R.A.M.

    1992-01-01

    In a group of captive chimpanzees (Pan troglodytes), we studied whether females received more social benefits from males when they were in oestrus than at other times and whether males distributed their beneficial acts especially to females with whom they mated more frequently. When in oestrus,

  14. 9 CFR 91.7 - Captive cervids.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Captive cervids. 91.7 Section 91.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS INSPECTION AND HANDLING OF...

  15. Turbine Seal Research at NASA GRC

    Science.gov (United States)

    Proctor, Margaret P.; Steinetz, Bruce M.; Delgado, Irebert R.; Hendricks, Robert C.

    2011-01-01

    Low-leakage, long-life turbomachinery seals are important to both Space and Aeronautics Missions. (1) Increased payload capability (2) Decreased specific fuel consumption and emissions (3) Decreased direct operating costs. NASA GRC has a history of significant accomplishments and collaboration with industry and academia in seals research. NASA's unique, state-of-the-art High Temperature, High Speed Turbine Seal Test Facility is an asset to the U.S. Engine / Seal Community. Current focus is on developing experimentally validated compliant, non-contacting, high temperature seal designs, analysis, and design methodologies to enable commercialization.

  16. Extrinsic factors significantly affect patterns of disease in free-ranging and captive cheetah (Acinonyx jubatus) populations.

    Science.gov (United States)

    Munson, Linda; Terio, Karen A; Worley, Michael; Jago, Mark; Bagot-Smith, Arthur; Marker, Laurie

    2005-07-01

    The cheetah (Acinonyx jubatus) has been considered a paradigm for disease vulnerability due to loss of genetic diversity. This species monomorphism has been suspected to be the basis for their general poor health and dwindling populations in captivity. North American and South African captive populations have high prevalences of hepatic veno-occlusive disease, glomerulosclerosis, gastritis, and systemic amyloidosis, diseases that are rare in other species. Unusually severe inflammatory reactions to common infectious agents have also been documented in captive cheetahs. The current study compared disease prevalences in free-ranging Namibian cheetahs with those in two captive populations of similar ages. The occurrence of diseases in the free-ranging population was determined from 49 necropsies and 27 gastric biopsies obtained between 1986 and 2003 and compared with prevalences in 147 North American and 80 South African captive cheetahs. Except for two cheetahs, the free-ranging population was in robust health with only mild lesions present, in contrast with significantly higher prevalences in the captive populations. Despite widespread heavy Helicobacter colonization in wild cheetahs, only 3% of the free-ranging population had moderate to severe gastritis, in contrast with 64% of captive cheetahs. No severe inflammatory reactions to viral infections were detected in the free-ranging animals. Because free-ranging Namibian cheetahs are as genetically impoverished as captive cheetahs, these findings caution against attributing loss of fitness solely to genetic factors and attest to the fundamental importance of extrinsic factors in wildlife health.

  17. Sealed can of spent fuel

    International Nuclear Information System (INIS)

    Suzuki, Yasuyuki.

    1976-01-01

    Object: To provide a seal plug cover with a gripping portion fitted to a canning machine and a gripping portion fitted to a gripper of the same configuration as a fuel body for handling the fuel body so as to facilitate the handling work. Structure: A sealed can comprises a vessel and a seal plug cover, said cover being substantially in the form of a bottomed cylinder, which is slipped on the vessel and air-tightly secured by a fastening bolt between it and a flange. The spent fuel body is received into the vessel together with coolant during the step of canning operation. Said seal plug cover has two gripping portions, one for opening and closing the plug cover of the canning machine as an exclusive use member, the other being in the form of a hook-shaped peripheral groove, whereby the gripping portions may be effectively used using the same gripper when the spent fuel body is transported while being received in the sealed can or when the fuel body is removed from the sealed can. (Kawakami, Y.)

  18. Insecurity of imperfect quantum bit seal

    International Nuclear Information System (INIS)

    Chau, H.F.

    2006-01-01

    Quantum bit seal is a way to encode a classical bit quantum mechanically so that everyone can obtain non-zero information on the value of the bit. Moreover, such an attempt should have a high chance of being detected by an authorized verifier. Surely, a reader looks for a way to get the maximum amount of information on the sealed bit and at the same time to minimize her chance of being caught. And a verifier picks a sealing scheme that maximizes his chance of detecting any measurement of the sealed bit. Here, I report a strategy that passes all measurement detection procedures at least half of the time for all quantum bit sealing schemes. This strategy also minimizes a reader's chance of being caught under a certain scheme. In this way, I extend the result of Bechmann-Pasquinucci et al. by proving that quantum seal is insecure in the case of imperfect sealed bit recovery

  19. INTERACTION STRATEGIES GENERATED BY KIDNAPPER TOWARD THE VICTIM DURING CAPTIVITY

    Directory of Open Access Journals (Sweden)

    LEONARDO ALBERTO RODRÍGUEZ CELY

    2002-01-01

    Full Text Available This study intends to make a descriptive analysis of the interaction strategies used by the kidnapper withthe victim during captivity, based on information taken from selected documents containing the victim testimonies.Information was supplemented with data from bibliographic references, profound interviews to GAULAgroup members. Document content was analyzed by confronting the three information sources. The findingswere that there is not a single but a multiple type of kidnappers: kidnappers, persons taking care, commanders,negotiators and suppliers. Likewise, it was evident that the type of relationship that the kidnapper establisheswith the victim varies depending on his/her hierarchy in the group, the roll played, age, education, ideal-drivingmotivations and the empathy with the person kidnapped. Other important variables of the study were: kidnappingstage, location, duration and releasing aspects.

  20. Ultrasonic dip seal maintenance system

    International Nuclear Information System (INIS)

    Poindexter, A.M.; Ricks, H.E.

    1978-01-01

    Disclosed is a system for removing impurities from the surfaces of liquid dip seals and for wetting the metal surfaces of liquid dip seals in nuclear components. The system comprises an ultrasonic transducer that transmits ultrasonic vibrations along an ultrasonic probe to the metal and liquid surfaces of the dip seal thereby loosening and removing those impurities

  1. Pododermatitis in captive-reared black stilts (Himantopus novaezelandiae).

    Science.gov (United States)

    Reissig, Elizabeth Chang; Tompkins, Daniel M; Maloney, Richard F; Sancha, Emily; Wharton, David A

    2011-09-01

    A potential cause of pododermatitis ("bumblefoot") was investigated in captive-reared juvenile black stilts at the Department of Conservation "Kaki Recovery Program" at Twizel, New Zealand. To address the importance of substrate, the development of clinical signs in individuals was compared among aviaries that contained rubber matting and/or salt footbaths, and controls. No effect of either experimental manipulation of the environment was apparent on pododermatitis development. With the substrate appearing not to be an initiating factor, and a previous study that indicated that the birds' diet fulfills the nutritional requirements for rearing black stilts in captivity, results of this study suggest that insufficient space for exercise may instead be the cause.

  2. Reusable tamper-indicating security seal

    International Nuclear Information System (INIS)

    Ryan, M.J.

    1981-01-01

    A reusable tamper-indicating mechanical security seal for use in safeguarding nuclear material has been developed. The high-security seal displays an unpredictable, randomly selected, five-digit code each time it is used. This five digit code serves the same purpose that the serial number does for conventional non-reusable seals - a unique identifier for each use or application. The newly developed reusable seal is completely enclosed within a seamless, tamper-indicating, plastic jacket. The jacket is designed to reveal any attempts to penetrate, section or to chemically remove and replace with a counterfeit for surreptitious purposes

  3. Actively controlled shaft seals for aerospace applications

    Science.gov (United States)

    Salant, Richard F.

    1995-07-01

    This study experimentally investigates an actively controlled mechanical seal for aerospace applications. The seal of interest is a gas seal, which is considerably more compact than previous actively controlled mechanical seals that were developed for industrial use. In a mechanical seal, the radial convergence of the seal interface has a primary effect on the film thickness. Active control of the film thickness is established by controlling the radial convergence of the seal interface with a piezoelectric actuator. An actively controlled mechanical seal was initially designed and evaluated using a mathematical model. Based on these results, a seal was fabricated and tested under laboratory conditions. The seal was tested with both helium and air, at rotational speeds up to 3770 rad/sec, and at sealed pressures as high as 1.48 x 10(exp 6) Pa. The seal was operated with both manual control and with a closed-loop control system that used either the leakage rate or face temperature as the feedback. The output of the controller was the voltage applied to the piezoelectric actuator. The seal operated successfully for both short term tests (less than one hour) and for longer term tests (four hours) with a closed-loop control system. The leakage rates were typically 5-15 slm (standard liters per minute), and the face temperatures were generally maintained below 100C. When leakage rate was used as the feedback signal, the setpoint leakage rate was typically maintained within 1 slm. However, larger deviations occurred during sudden changes in sealed pressure. When face temperature was used as the feedback signal, the setpoint face temperature was generally maintained within 3 C, with larger deviations occurring when the sealed pressure changes suddenly. the experimental results were compared to the predictions from the mathematical model. The model was successful in predicting the trends in leakage rate that occurred as the balance ratio and sealed pressure changed

  4. Pool gateway seal

    International Nuclear Information System (INIS)

    Starr, J.A.; Steinert, L.A.

    1983-01-01

    A device for sealing a gateway between interconnectable pools in a nuclear facility comprising a frame supporting a liquid impermeable sheet positioned in a u-shaped gateway between the pools. An inflatable tube carried in a channel in the periphery of the frame and adjoining the gateway provides a seal therebetween when inflated. A restraining arrangement on the bottom edge of the frame is releasably engagable with an adjacent portion of the gateway to restrict the movement of the frame in the u-shaped gateway upon inflation of the tube, thereby enhancing the seal. The impermeable sheet is formed of an elastomer and thus is conformable to a liquid permeable supportive wall upon application of liquid pressure to the side of the sheet opposite the wall

  5. Research on Captive Broodstock Programs for Pacific Salmon, 2001-2002 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry A.; Tezak, E.P. (National Marine Fisheries Service); Endicott, Rick (Long Live the Kings, Seattle, WA)

    2002-08-01

    In the 2000 Federal Columbia River Power System (FCRPS) Biological Opinion, NMFS identified six populations of steelhead and several salmon populations that had dropped to critically low levels and continue to decline. Following thorough risk-benefit analyses, captive propagation programs for some or all of the steelhead (Oncorhynchus mykiss) populations may be required to reduce the risk of extinction, and more programs may be required in the future. Thus, captive propagation programs designed to maintain or rebuild steelhead populations require intensive and rigorous scientific evaluation, much like the other objectives of BPA Project 1993-056-00 currently underway for chinook (O. tshawytscha) and sockeye salmon (O. nerka). Pacific salmon reared to the adult stage in captivity exhibit poor reproductive performance when released to spawn naturally. Poor fin quality and swimming performance, incomplete development of secondary sex characteristics, changes in maturation timing, and other factors may contribute to reduced spawning success. Improving natural reproductive performance is critical for the success of captive broodstock programs in which adult-release is a primary reintroduction strategy for maintaining ESA-listed populations.

  6. Development and high temperature sealing performance study of double sealing flange

    International Nuclear Information System (INIS)

    Zhang Qinhua; Fu Yuan; Xie Leidong; Li Zhong; Tang Zhongfeng

    2013-01-01

    Background: Flange is an important component used in the connection between pipes or between pipe and equipment. It is widely used in mechanical industry, petrochemical industry and nuclear industry. Ordinary flange could be oxidized oi corroded under high temperature and strong corrosion condition, which leads to flange's failure. Purpose: The aim is to design and validate the double sealing flange which could be used in high temperature and strong corrosion condition stably and supplied as a reliable detachable connection for petrochemical industry and nuclear industry under high temperature and strong corrosion environment. Methods: New flange is designed using flexible graphite spiral wound gaskets and C style metal ring double sealing structure. The unique protection gas design ensures the graphite spiral wound gasket used in high temperature reliably. Test bed is built to verify the stability of the flange. Results: Pressure reducing of graphite spiral wound gasket is only 0.01 MPa at 750℃, 0.7 MPa for 43 h, there is not obvious oxidation phenomenon at the same time. The leakage rate of metal C sealing ring is 11.51×10 -4 atm cc/s, and the metal C ring sealing's performance meets the engineering requirements. Conclusion: The leakage rate of double sealing flange is almost zero under 0.7 MPa at 750℃, which meets the engineering requirements. It avoids oxidizing at high temperature and corroding under strong corrosion condition. (authors)

  7. Steam Turbine Flow Path Seals (a Review)

    Science.gov (United States)

    Neuimin, V. M.

    2018-03-01

    Various types of shroud, diaphragm, and end seals preventing idle leak of working steam are installed in the flow paths of steam turbine cylinders for improving their efficiency. Widely known labyrinth seals are most extensively used in the Russian turbine construction industry. The category of labyrinth seals also includes seals with honeycomb inserts. The developers of seals with honeycomb inserts state that the use of such seals makes it possible to achieve certain gain due to smaller leaks of working fluid and more reliable operation of the system under the conditions in which the rotor rotating parts may rub against the stator elements. However, a positive effect can only be achieved if the optimal design parameters of the honeycomb structure are fulfilled with due regard to the specific features of its manufacturing technology and provided that this structure is applied in a goal-seeking manner in the seals of steam and gas turbines and compressors without degrading their vibration stability. Calculated and preliminary assessments made by experts testify that the replacement of conventional labyrinth seals by seals with honeycomb inserts alone, due to which the radial gaps in the shroud seal can be decreased from 1.5 to 0.5 mm, allows the turbine cylinder efficiency to be increased at the initial stage by approximately 1% with the corresponding gain in the turbine set power output. The use of rectangular-cellular seals may result, according to estimates made by their developers, in a further improvement of turbine efficiency by 0.5-1.0%. The labor input required to fabricate such seals is six to eight times smaller than that to fabricate labyrinth seals with honeycomb inserts. Recent years have seen the turbine construction companies of the United States and Germany advertising the use of abradable (sealing) coatings (borrowed from the gas turbine construction technology) in the turbine designs instead of labyrinth seals. The most efficient performance of

  8. Reproduction of Phylloderma stenops in captivity (Chiroptera, Phyllostomidae

    Directory of Open Access Journals (Sweden)

    CEL Esbérard

    Full Text Available A reproductive colony of Phylloderma stenops was established in captivity. The bats were maintained in 1/2" wired screen cages sized 90 × 60 × 80 cm in a room with cycles of 13 hours of light and 11 hours of dark and with temperature and humidity ranging from 27 to 31 °C and 75 to 90% respectively. Bats were fed with a semi-liquid diet composed of chopped fruits, raw eggs, bovine meat, dog food, honey, dehydrated shrimp, salt and a vitamin and mineral complex offered daily. In the first two years of confinement the diet was complemented with laboratory-raised cockroaches, mealworms, young mice and seasonal fruits. Nine births occurred from three wild caught females 770-1050 days after capture and two captive-born females. Births occurred in September, February and November-December. The neonate measured 15.0 g of weight and present 34.1 mm of forearm length. Two captive-born females gave birth for the first time at 402-445 days of age. Phylloderma stenops species presents postpartum oestrus, gestation of 5.5 months, lactation of 3.3 months and sexual maturity at 8.0-8.5 months. Fetuses are palpable around two months before birth and females may present synchronisation of births.

  9. The effects of captive versus wild rearing environments on long bone articular surfaces in common chimpanzees (Pan troglodytes

    Directory of Open Access Journals (Sweden)

    Kristi L. Lewton

    2017-08-01

    Full Text Available The physical environments of captive and wild animals frequently differ in substrate types and compliance. As a result, there is an assumption that differences in rearing environments between captive and wild individuals produce differences in skeletal morphology. Here, this hypothesis is tested using a sample of 42 captive and wild common chimpanzees (Pan troglodytes. Articular surface areas of the humerus, radius, ulna, femur, and tibia were calculated from linear breadth measurements, adjusted for size differences using Mosimann shape variables, and compared across sex and environmental groups using two-way ANOVA. Results indicate that the articular surfaces of the wrist and knee differ between captive and wild chimpanzees; captive individuals have significantly larger distal ulna and tibial plateau articular surfaces. In both captive and wild chimpanzees, males have significantly larger femoral condyles and distal radius surfaces than females. Finally, there is an interaction effect between sex and rearing in the articular surfaces of the femoral condyles and distal radius in which captive males have significantly larger surface areas than all other sex-rearing groups. These data suggest that long bone articular surfaces may be sensitive to differences experienced by captive and wild individuals, such as differences in diet, body mass, positional behaviors, and presumed loading environments. Importantly, these results only find differences due to rearing environment in some long bone articular surfaces. Thus, future work on skeletal morphology could cautiously incorporate data from captive individuals, but should first investigate potential intraspecific differences between captive and wild individuals.

  10. Focal palatine erosion in captive and free-living cheetahs (Acinonyx jubatus) and other felid species.

    Science.gov (United States)

    Zordan, Martýn; Deem, Sharon L; Sanchez, Carlos R

    2012-01-01

    We examined 1,092 skulls of captive and free-living individuals, representing 33 felid species, to determine the prevalence of focal palatine erosion (FPE). FPE was detected in 3.2% of cats evaluated, including cheetah (Acinonyx jubatus) and 14 other felid species. The prevalence of FPE between cheetah (9.4%; n = 64) and non-cheetah species (2.8%; n = 1,028) (χ(2) test; P = 0.004) and between captive (5.7%; n = 246) and free-living (2.4%; n = 824) individuals (χ(2) test; P = 0.010) were significantly different, with prevalence between captive (19%; n = 21) and free-living (2.9%; n = 34) cheetahs approaching significance (Fisher's exact test; P = 0.064). FPE was diagnosed with equal prevalence in skulls from individuals in which the lower molars did not meet the palatine bone (60.6%) and individuals in which it did (39.4%; n = 33) (χ(2) test; P = 0.139). In cheetahs with FPE, one was a captive animal in Germany, one a free-living cheetah from Mali, one captive cheetah from Kenya, and three captive cheetahs of unknown origin. Additionally, we evaluated the medical records of 49 captive cheetahs in Namibia. Of these cheetahs, 48 (98.0%) had clinical signs consistent with FPE, although only 16 of these 48 (39.6%) had perforation of the palatine bone. Based on physical examinations, FPE was diagnosed in two caracals (Caracal caracal) and one fishing cat (Prionailurus viverrinus) from a North American Zoo. Results from this study confirm FPE in cheetahs outside of Namibia, in a minimum of 15 felid species, and a higher FPE prevalence in captive individuals than free-living ones. Clinical implications of these findings and recommendations for future studies are provided. © 2011 Wiley Periodicals, Inc.

  11. Captivity Shapes the Gut Microbiota of Andean Bears: Insights into Health Surveillance

    Directory of Open Access Journals (Sweden)

    Andrea Borbón-García

    2017-07-01

    Full Text Available The Andean bear is an endemic species of the tropical Andes who has an almost exclusively plant-based diet. Since herbivorous mammals do not carry enzymes for fiber degradation, the establishment of symbiosis with cellulolytic microorganisms in their gastrointestinal (GI tract is necessary to help them fulfill their nutritional needs. Furthermore, as described for other mammals, a stable, diverse, and balanced gut microbial composition is an indicator of a healthy status of the host; under disturbances this balance can be lost, leading to potential diseases of the host. The goal of this study was to describe the gut microbiota of wild and captive Andean bears and determine how habitat status influences the composition and diversity of the gut symbiotic community. Fecal samples from wild (n = 28 and captive (n = 8 Andean bears were collected in “Reserva Pantano de Martos” and “Fundación Bioandina”, Colombia. Composition and diversity analyses were performed using amplicons from the V4 region of the 16S rDNA gene sequenced using the Ion PGM platform. PICRUSt algorithm was applied to predict the gene content of the gut microbiome of wild and captive Andean bears. A total of 5,411 and 838 OTUs were identified for wild and captive bears, respectively. Captive bears contained a lower number of bacterial phyla (n = 7 compared to wild individuals (n = 9. Proteobacteria (59.03% and Firmicutes (14.03% were the phyla that contributed the most to differences between wild and captive bears (overall dissimilarity = 87.72%. At family level, Enterobacteriaceae drove the main differences between the two groups (13.7%. PICRUSt metagenomics predictions suggested a similar pattern of relative abundance of gene families associated with the metabolism of carbohydrates across samples in wild individuals, despite the taxonomic differences of their gut microbiota. Captivity alters the availability and diversity of food resources, which likely reduces microbiota

  12. Prefered Feed of Anoa (Bubalus sp. at Manado Forestry Research Institute Captivity

    Directory of Open Access Journals (Sweden)

    Diah Irawati Dwi Arini

    2014-12-01

    Full Text Available The present study aims to determine the type of fodder available and the level of scarcity of Anoa’s fodder at the condition prior to captivity at the Forestry Research Institute of Manado. The method employed was a trial of 12 (twelve types of fodder available around the captivity site given to 2 (two female anoas. The data were analyzed and displayed in tables and graphs while the data of preferred fodder were analyzed using Neu’s index equation. The findings suggest that anoa put in captivity at the Forestry Research Institute of Manado did not encounter problems during the process of feeding adaptation. The average fodder needs required anoa at the captivity site of the Forestry Research Institute of Manado range from 10.2 to 11.7 kg/ day in which the fodder was given twice a day. Meanwhile, based on the availability and ease of supplying the fodder from around the captivity site, the following are the types of fodder from higher to lower preferences, namely: field grass, kangkung, shoes banana, string beans, beans and cucumbers, respectively. While fodder with the lowest level of scarcity is the type of fodder with a hard texture such as sweet potatoes, carrots or potatoes. Based on the results of a number of studies, it is recommended that variations in anoa’s fodder can be done every 4-5 times a day.

  13. Haptoglobin concentrations in free-range and temporarily captive juvenile steller sea lions.

    Science.gov (United States)

    Thomton, Jamie D; Mellish, Jo-Ann E

    2007-04-01

    Haptoglobin (Hp) is an acute-phase protein synthesized in the liver that circulates at elevated concentrations in response to tissue damage caused by inflammation, infection, and trauma. As part of a larger study, sera Hp concentrations were measured in temporarily captive (n = 21) and free-range (n = 38) western stock juvenile Steller sea lions (Eumetopias jubatus) sampled from 2003 to 2006. Baseline Hp concentration at time of capture was 133.3 +/- 17.4 mg/dl. Temporarily captive animals exhibited a 3.2-fold increase in Hp concentrations during the first 4 wk of captivity, followed by a return to entry levels by week 5. Haptoglobin levels were not influenced by age, season, or parasite load. There was a significant positive correlation between Hp concentrations and white blood cell count (P < 0.001) and globulin levels (P < 0.001) and a negative correlation to red blood cell count and hematocrit (P < 0.001 for both). There was no correlation between Hp levels and platelet count (P = 0.095) or hemoglobin (P = 0.457). Routine blubber biopsies collected under gas anesthesia did not produce a measurable Hp response. One animal with a large abscess had an Hp spike of 1,006.0 mg/dl that returned to entry levels after treatment. In conclusion, serum Hp levels correlate to the stable clinical health status observed during captivity, with moderate Hp response during capture and initial acclimation to captivity and acute response to inflammation and infection.

  14. An Assessment of the Status of Captive Broodstock Technology of Pacific Salmon, 1995 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Flagg, Thomas A.; Mahnaken, Conrad V.W.; Hard, Jeffrey J.

    1995-06-01

    This report provides guidance for the refinement and use of captive broodstock technology for Pacific salmon (Oncorhynchus spp.) by bringing together information on the husbandry techniques, genetic risks, physiology, nutrition, and pathology affecting captive broodstocks. Captive broodstock rearing of Pacific salmon is an evolving technology, as yet without well defined standards. At present, we regard captive rearing of Pacific salmon as problematic: high mortality rates and low egg viability were common in the programs we reviewed for this report. One of the most important elements in fish husbandry is the culture environment itself. Many captive broodstock programs for Pacific salmon have reared fish from smolt-to-adult in seawater net-pens, and most have shown success in providing gametes for recovery efforts. However, some programs have lost entire brood years to diseases that transmitted rapidly in this medium. Current programs for endangered species of Pacific salmon rear most fish full-term to maturity in fresh well-water, since ground water is low in pathogens and thus helps ensure survival to adulthood. Our review suggested that captive rearing of fish in either freshwater, well-water, or filtered and sterilized seawater supplied to land-based tanks should produce higher survival than culture in seawater net-pens.

  15. SEAL FOR HIGH SPEED CENTRIFUGE

    Science.gov (United States)

    Skarstrom, C.W.

    1957-12-17

    A seal is described for a high speed centrifuge wherein the centrifugal force of rotation acts on the gasket to form a tight seal. The cylindrical rotating bowl of the centrifuge contains a closure member resting on a shoulder in the bowl wall having a lower surface containing bands of gasket material, parallel and adjacent to the cylinder wall. As the centrifuge speed increases, centrifugal force acts on the bands of gasket material forcing them in to a sealing contact against the cylinder wall. This arrangememt forms a simple and effective seal for high speed centrifuges, replacing more costly methods such as welding a closure in place.

  16. The cool seal system: a practical solution to the shaft seal problem and heat related complications with implantable rotary blood pumps.

    Science.gov (United States)

    Yamazaki, K; Mori, T; Tomioka, J; Litwak, P; Antaki, J F; Tagusari, O; Koyanagi, H; Griffith, B P; Kormos, R L

    1997-01-01

    A critical issue facing the development of an implantable, rotary blood pump is the maintenance of an effective seal at the rotating shaft. Mechanical seals are the most versatile type of seal in wide industrial applications. However, in a rotary blood pump, typical seal life is much shorter than required for chronic support. Seal failure is related to adhesion and aggregation of heat denatured blood proteins that diffuse into the lubricating film between seal faces. Among the blood proteins, fibrinogen plays an important role due to its strong propensity for adhesion and low transition temperature (approximately 50 degrees C). Once exposed to temperature exceeding 50 degrees C, fibrinogen molecules fuse together by multi-attachment between heat denatured D-domains. This quasi-polymerized fibrin increases the frictional heat, which proliferates the process into seal failure. If the temperature of the seal faces is maintained well below 50 degrees C, a mechanical seal would not fail in blood. Based on this "Cool-Seal" concept, we developed a miniature mechanical seal made of highly thermally conductive material (SiC), combined with a recirculating purge system. A large supply of purge fluid is recirculated behind the seal face to augment convective heat transfer to maintain the seal temperature below 40 degrees C. It also cools all heat generating pump parts (motor coil, bearing, seal). The purge consumption has been optimized to virtually nil (seal system has now been incorporated into our intraventricular axial flow blood pump (IVAP) and newly designed centrifugal pump. Ongoing in vivo evaluation of these systems has demonstrated good seal integrity for more than 160 days. The Cool-Seal system can be applied to any type of rotary blood pump (axial, diagonal, centrifugal, etc.) and offers a practical solution to the shaft seal problem and heat related complications, which currently limit the use of implantable rotary blood pumps.

  17. Microplastic Contamination of Wild and Captive Flathead Grey Mullet (Mugil cephalus

    Directory of Open Access Journals (Sweden)

    Lewis T. O. Cheung

    2018-03-01

    Full Text Available A total of 60 flathead grey mullets were examined for microplastic ingestion. Thirty wild mullets were captured from the eastern coast of Hong Kong and 30 captive mullets were obtained from fish farms. Microplastic ingestion was detected in 60% of the wild mullets, with an average of 4.3 plastic items per mullet, while only 16.7% of captive mullets were found to have ingested microplastics, with an average of 0.2 items per mullet. The results suggested that wild mullets have a higher risk of microplastic ingestion than their captive counterparts. The most common plastic items were fibres that were green in colour and small in size (<2 mm. Polypropylene was the most common polymer (42%, followed by polyethylene (25%. In addition, the abundance of microplastics was positively correlated with larger body size among the mullets.

  18. Captive rearing initiative for Salmon River chinook salmon; Report period: January 1998-January 1999; Annual report

    International Nuclear Information System (INIS)

    Hassemer, Peter; Kline, Paul; Heindel, Jeff; Plaster, Kurtis

    1999-01-01

    The IDFG initiated a captive rearing program for populations at high risk of extinction to maintain metapopulation structure. Captive rearing is a short-term approach to species preservation. The main goal of the captive rearing approach is to avoid demographic and environmental risks of cohort extinction; maintaining the genetic identity of the breeding unit is an important but secondary objective

  19. Miniature magnetic fluid seal working in liquid environments

    Energy Technology Data Exchange (ETDEWEB)

    Mitamura, Yoshinori, E-mail: ymitamura@par.odn.ne.jp [Graduate School of Information Science and Technology, Hokkaido University, Sapporo 060-0814 (Japan); Durst, Christopher A., E-mail: chris@procyrion.com [Procyrion, Inc., Houston, TX 77027 (United States)

    2017-06-01

    This study was carried out to develop a miniature magnetic fluid (MF) seal working in a liquid environment. The miniature MF seal is intended for use in a catheter blood pump. The requirements for the MF seal included a size of less than Ø4×4.5 mm, shaft diameter of 1 mm, sealing pressure of 200 mmHg, shaft speed of up to 40000 rpm, and life of one month. The miniature MF seal was composed of an NdFeB magnet (Ø4×Ø2×1) sandwiched between two pole pieces (Ø4×Ø1.1×0.5). A shield (Ø4×Ø1.2×1.5) was placed on the pole piece facing the liquid to minimize the influence of pump flow on the MF. The seal was installed on a Ø1 shaft. A seal was formed by injecting MF (Ms: 47.8 kA/m and η: 0.5 Pa·sec) into the gap between the pole pieces and the shaft. Total volume of the MF seal was 44 μL. A sealing pressure of 370 mmHg was obtained at motor speeds of 0-40,000 rpm. The seal remained perfect for 10 days in saline under the condition of a pump flow of 1.5 L/min (The test was terminated in accordance with plans). The seal remained intact after ethylene oxide sterilization during which the seal was exposed to high pressures. In conclusion, the newly developed MF seal will be useful for a catheter pump. - Highlights: • A miniature magnetic fluid seal working in a liquid environment was developed. • The seal can be installed on Ø1 mm shaft and can seal against 370 mmHg at 40000 rpm. • The magnetic fluid seal will be useful for a catheter blood pump.

  20. Design analysis of a self-acting spiral-groove ring seal for counter-rotating shafts. [o ring seals

    Science.gov (United States)

    Dirusso, E.

    1983-01-01

    A self-acting spiral groove inter-shaft ring seal of nominal 16.33 cm (6.43 in.) diameter for sealing fan bleed air between counter rotating shafts in advanced turbofan engines was analyzed. The analysis focused on the lift force characteristics of the spiral grooves. A NASA Lewis developed computer program for predicting the performance of gas lubricated face seals was used to optimize the spiral groove geometry to produce maximum lift force. Load capacity curves (lift force as function of film thickness) were generated for four advanced turbofan engine operating conditions at relative seal speeds ranging from 17,850 to 29,800 rpm, sealed air pressures from 6 to 42 N/sq cm (9 to 60 psi) absolute and temperatures from 95 to 327 C (203 to 620 F). The relative seal sliding speed range was 152 to 255 m/sec (500 to 836 ft/sec). The analysis showed that the spiral grooves are capable of producing sufficient lift force such that the ring seal will operate in a noncontacting mode over the operating range of typical advanced turbofan engines.

  1. Seal Apparatus and Methods to Manufacture Thereof

    Science.gov (United States)

    Richard, James A. (Inventor)

    2013-01-01

    In some implementations, apparatus and methods are provided through which a dynamic cryogenic seal is manufactured. In some implementations, the seal includes a retainer and a spring-seal assembly, the assembly being comprised of a main spring housing and fluorine-containing polymer seals. In some implementations, either a radial seal, or an axial (or "piston seal") is provided. In some implementations, methods of manufacturing the dynamic cryogenic seal are also provided. In some implementations, the methods include assembling the components while either heated or cooled, taking advantage of thermal expansion and contraction, such that there is a strong interference fit between the components at room temperature. In some implementations, this process ensures that the weaker fluorine-containing polymer seal is forced to expand and contract with the stronger retainer and spring and is under constant preload. In some implementations, the fluorine-containing polymer is therefore fluidized and retained, and can not lift off.

  2. Czechs and Slovaks in Russian Captivity during World War I (1914-1918)

    OpenAIRE

    Oksana E. Dmitrieva

    2013-01-01

    The article is focused on the features of more than 250 000 Czechs and Slovaks in Russian captivity during World War I: the amount, quartering and supply benefits, work in various sectors of the Russian economy, military units formation, social and national organizations activities, charity support. The conditions of Czechs and Slovaks captivity are recollected. New sources are introduced into scientific use.

  3. A dynamic analysis of rotary combustion engine seals

    Science.gov (United States)

    Knoll, J.; Vilmann, C. R.; Schock, H. J.; Stumpf, R. P.

    1984-01-01

    Real time work cell pressures are incorporated into a dynamic analysis of the gas sealing grid in Rotary Combustion Engines. The analysis which utilizes only first principal concepts accounts for apex seal separation from the crochoidal bore, apex seal shifting between the sides of its restraining channel, and apex seal rotation within the restraining channel. The results predict that apex seals do separate from the trochoidal bore and shift between the sides of their channels. The results also show that these two motions are regularly initiated by a seal rotation. The predicted motion of the apex seals compares favorably with experimental results. Frictional losses associated with the sealing grid are also calculated and compare well with measurements obtained in a similar engine. A comparison of frictional losses when using steel and carbon apex seals has also been made as well as friction losses for single and dual side sealing.

  4. Mechanical seal having a double-tier mating ring

    Science.gov (United States)

    Khonsari, Michael M.; Somanchi, Anoop K.

    2005-09-13

    An apparatus and method to enhance the overall performance of mechanical seals in one of the following ways: by reducing seal face wear, by reducing the contact surface temperature, or by increasing the life span of mechanical seals. The apparatus is a mechanical seal (e.g., single mechanical seals, double mechanical seals, tandem mechanical seals, bellows, pusher mechanical seals, and all types of rotating and reciprocating machines) comprising a rotating ring and a double-tier mating ring. In a preferred embodiment, the double-tier mating ring comprises a first and a second stationary ring that together form an agitation-inducing, guided flow channel to allow for the removal of heat generated at the seal face of the mating ring by channeling a coolant entering the mating ring to a position adjacent to and in close proximity with the interior surface area of the seal face of the mating ring.

  5. Socialization of adult owl monkeys (Aotus sp.) in Captivity.

    Science.gov (United States)

    Williams, Lawrence E; Coke, C S; Weed, J L

    2017-01-01

    Social housing has often been recommended as one-way to address the psychological well-being of captive non-human primates. Published reports have examined methods to socialize compatible animals by forming pairs or groups. Successful socialization rates vary depending on the species, gender, and environment. This study presents a retrospective look at pairing attempts in two species of owl monkeys, Aotus nancymaae and A. azarae, which live in monogamous pairs in the wild. The results of 477 pairing attempt conducted with captive, laboratory housed owl monkeys and 61 hr of behavioral observations are reported here. The greatest success pairing these owl monkeys occurred with opposite sex pairs, with an 82% success rate. Opposite sex pairs were more successful when females were older than males. Female-female pairs were more successful than male-male (MM) pairs (62% vs 40%). Successful pairs stayed together between 3 and 7 years before the animals were separated due to social incompatibility. Vigilance, eating, and sleeping during introductions significantly predicted success, as did the performance of the same behavior in both animals. The results of this analysis show that it is possible to give captive owl monkeys a social alternative even if species appropriate social partners (i.e., opposite sex partners) are not available. The focus of this report is a description of one potential way to enhance the welfare of a specific new world primate, the owl monkey, under laboratory conditions. More important is how the species typical social structure of owl monkeys in nature affects the captive management of this genus. Am. J. Primatol. 79:e22521, 2017. © 2015 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  6. High prevalence of antibodies against hepatitis A virus among captive nonhuman primates.

    Science.gov (United States)

    Sa-nguanmoo, Pattaratida; Thawornsuk, Nutchanart; Rianthavorn, Pornpimol; Sommanustweechai, Angkana; Ratanakorn, Parntep; Poovorawan, Yong

    2010-04-01

    Hepatitis A virus (HAV) can infect not only humans but also several other nonhuman primates. This study has been conducted to evaluate the comprehensive anti-HAV seroprevalence in captive nonhuman primate populations in Thailand. The prevalence of antibodies against HAV in 96 captive nonhuman primates of 11 species was evaluated by competitive enzyme immunoassay (EIA). HAV antibodies were found in 64.7% (11/17) of macaques, 85.7% (6/7) of langurs, 28.4% (10/35) of gibbons, and 94.6% (35/37) of orangutans. However, anti-HAV IgM was not found in any sera. These results indicate that the majority of captive nonhuman primates in Thailand were exposed to HAV. It is possible that some of the animals were infected prior to capture.

  7. Development of the seal for nuclear material

    International Nuclear Information System (INIS)

    Lu Feng; Lu Zhao; Zhao Yonggang; Zhang Qixin; Xiao Xuefu

    2000-01-01

    Two kinds of double cap metallic seal and an adhesive seal are developed for the purpose of the accounting for and control of nuclear material. Two kinds of double cap metallic seal are made of stainless steel and copper, respectively and the self-locked technique is used. The number and the random pattern are carved out side and in side of a cap, respectively, for the seal. The random pattern carved inside of a cap for seal is taken a picture using numeral camera and memorized in computer. Special software is developed for verification of the random pattern memorized in computer. The adhesive seal is made of special adhesive paper for purpose of security, and a special pattern guarded against falsification is printed on seal paper using ultraviolet fluorescent light technique

  8. NEPHROPATHIES IN THE EUROPEAN CAPTIVE CHEETAH (ACINONYX JUBATUS) POPULATION.

    Science.gov (United States)

    Url, Angelika; Krutak, Verena; Kübber-Heiss, Anna; Chvala-Mannsberger, Sonja; Robert, Nadia; Dinhopl, Nora; Schmidt, Peter; Walzer, Chris

    2016-09-01

    According to previous studies in captive cheetah ( Acinonyx jubatus ) populations, one of the most threatening diseases besides amyloidosis, myelopathy, veno occlusive disease, and gastritis, is renal failure. Contrary to captive cheetahs in North America and South Africa, morphological data concerning renal lesions in the cheetah European Endangered Species Program (EEP) are lacking. This study details the histological characterization as well as immunohistochemical and morphometrical analysis of nephropathies in 35 captive cheetahs from the EEP, which were necropsied between 1985 and 2003. Examination of paraffin- and glycolmethacrylate-methylmethacrylate (GMA-MMA) embedded kidney samples by light microscopy revealed glomerulonephritis in 91%, with a high prevalence for glomerulosclerosis and glomerulonephritis with the histologic pattern of membranous glomerulonephritis (77%). Besides these predominating glomerulopathies, a wide range of other renal lesions, like acute tubular necrosis, interstitial nephritis, calcinosis, and amyloidosis, were present. Pathological expression of collagen type IV, complement C3, fibronectin, and IgG was demonstrated in the glomeruli of the cheetah kidneys with the use of the avidin-biotin complex method. Morphometrical analysis was performed on GMA-MMA embedded kidney samples to obtain glomerulosclerosis index and glomerulosclerosis incidence.

  9. Occurrence of Hepatozoon spp. (Apicomplexa, Hepatozoidae) in snakes of genus Bothrops in captivity

    OpenAIRE

    Glaser, V.; Boni, A.P.; Albuquerque, C.A.C.

    2008-01-01

    The occurrence of Hepatozoon gamont in the blood cells of Bothrops jararaca and B. jararacussu in captivity was analyzed. The prevalence of infection by Hepatozoon spp. was 50% and few erythrocytes contained the gamonts. Results suggest that the infection by Hepatozoon spp. occurred in the natural environment or after the captivity.

  10. Innovative Seals for Solid Oxide Fuel Cells (SOFC)

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Raj

    2008-06-30

    A functioning SOFC requires different type of seals such as metal-metal, metal-ceramic, and ceramic-ceramic. These seals must function at high temperatures between 600--900{sup o}C and in oxidizing and reducing environments of the fuels and air. Among the different type of seals, the metal-metal seals can be readily fabricated using metal joining, soldering, and brazing techniques. However, the metal-ceramic and ceramic-ceramic seals require significant research and development because the brittle nature of ceramics/glasses can lead to fracture and loss of seal integrity and functionality. Consequently, any seals involving ceramics/glasses require a significant attention and technology development for reliable SOFC operation. This final report is prepared to describe the progress made in the program on the needs, approaches, and performance of high temperature seals for SOFC. In particular, a new concept of self-healing glass seals is pursued for making seals between metal-ceramic material combinations, including some with a significant expansion mismatch.

  11. Isospora bocamontensis (Protozoa: Apicomplexa in captive yellow cardinal Gubernatrix cristata (Passeriformes: Emberezidae

    Directory of Open Access Journals (Sweden)

    Larissa Quinto Pereira

    2013-03-01

    Full Text Available The yellow cardinal (Gubernatrix cristata is a passerine found in southern Brazil, especially along the border with Uruguay and Argentina. It is an endangered species and its population is decreasing. Among the parasites that affect passerines, the genus Isospora is the most easily found in both captive and free-living birds. This parasite commonly causes injury to the intestinal tissue and could occasionally affect other organs. In this work we examined the occurrence of coccidiosis in captive yellow cardinals and its association with factors such as sex, use of parasiticides, type of enclosure, contact with feces, type of food and cleaning frequency. We collected fecal samples of 45 yellow cardinals, healthy and kept in captivity, in late afternoon at the end of the reproductive period. The examination showed parasitic infection by Isospora bocamontensis in 44.5% of the birds. This infection is not influenced by the sex of birds, but is significantly affected by the type of enclosure, contact with the feces, use of parasiticides, type of food and cleaning frequency. The results indicate that to keep yellow cardinals captive, these factors must be observed.

  12. 21 CFR 864.9750 - Heat-sealing device.

    Science.gov (United States)

    2010-04-01

    ... and Blood Products § 864.9750 Heat-sealing device. (a) Identification. A heat-sealing device is a device intended for medical purposes that uses heat to seal plastic bags containing blood or blood... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Heat-sealing device. 864.9750 Section 864.9750...

  13. Refurbishing the seals of the H2S compressors in the isotopic exchange installations at the Heavy Water Reprocessing Plant. Technical solutions for replacing liquid seals by dry seals

    International Nuclear Information System (INIS)

    Panait; Adrian; Serban, Viorel; Androne, Marian; Florea, Ioana; Ciocan, George; State, Elena

    2004-01-01

    An analysis of the present sealing system in the H 2 S compressors showed that the risk of accidental hydrogen sulfide escape into the atmosphere is high in case of a seal oil pressure loss. At the same time there exist drawbacks occurring even in normal regime of functioning among which one can mention: - relatively high losses of oil occur, part of the oil being carried away by the compressors and released into the isotopic exchange columns where the water counter current flow produces a foaming that reduces the column processing capacity; - part of the sealing oil leaks reaches the final product, the heavy water, where from it must be removed by chemical procedures; - the installations adjacent to the sealing system are relatively sophisticated and require relatively high expenses for exploitation and maintenance. The classical sealing systems using sealing rings, sleeves, labyrinths, etc, cannot be used since their safe working range is exceeded due to either driving shaft rotational speed, or to the increase of its diameter, or else to an increase of the speed of motion of moving parts relative to the fix parts. The sealing systems with magnetic liquids are rather sophisticated and expensive while in case of electric supply loss they are completely unsafe, because their sealing capacity vanishes. The materials used for sealing gaskets limit their application only to the cases when the relative motion of the moving pieces is low or vanishing what happens only at shut down or failure situations. To prevent these drawbacks of the present seal system in the H 2 S compressors of the isotopic exchange columns and having in view the limitations of the currently used sealing systems a new system of sealing was conceived and designed on the basis of the patent titled 'Sealing Installation and Procedure' recorded by OSIM under No. A/0315/10.04.2003. The new system can be built as a single or double stage each of them having in turn a dynamic and a static sub-stage. The

  14. Improved cryogenic shaft seals

    Science.gov (United States)

    Gillon, W. A., Jr.; Tellier, G. F.

    1976-01-01

    Seals are designed for use with liquid propellant ball valves at temperatures ranging from -400 F to 130 F and 8,000 psig. Seals are capable of sustaining 90 degree rotation, with substantial amount of lateral and axial play, caused by large pressure loads and differential thermal contraction.

  15. Face-Sealing Butterfly Valve

    Science.gov (United States)

    Tervo, John N.

    1992-01-01

    Valve plate made to translate as well as rotate. Valve opened and closed by turning shaft and lever. Interactions among lever, spring, valve plate, and face seal cause plate to undergo combination of translation and rotation so valve plate clears seal during parts of opening and closing motions.

  16. Haematological values for captive harpy eagle (Harpia harpyja

    Directory of Open Access Journals (Sweden)

    Marcos J. Oliveira

    2014-08-01

    Full Text Available Decreasing of harpy eagle (Harpia harpyja populations in natural environments, mainly in non-preserved areas, makes captive population management an important contribution to genetic diversity conservation. The aim of this study is to evaluate hematological parameters for captive harpy eagles maintained at the wild animals breeding center of Itaipu Binacional, Paraná State, Brazil. Fourteen blood samples from nine harpy eagles were collected from animals of both sexes, of different ages and with no clinical signs of disease. Significant variations were found in haematological values of hematocrit, hemoglobin, mean corpuscular hemoglobin (MCH, mean corpuscular hemoglobin concentration (MCHC, leukocyte, a relative number of heterophils, absolute and relative number of lymphocytes, monocytes, eosinophils, basophils and plasma protein between groups of young (less than six months old and adult birds. Comparing males and females there was variation in the values of erythrocytes, hemoglobin, mean corpuscular volume (MCV, mean corpuscular hemoglobin (MCH on heterophils, absolute and relative number of lymphocytes, eosinophils and basophils. There was also variation in the values of red blood cells, hematocrit, hemoglobin, mean corpuscular volume (MCV, mean corpuscular hemoglobin (MCH, mean corpuscular hemoglobin concentration (MCHC, leukocyte count, absolute number of lymphocytes, eosinophils and basophils among birds that study compared to another reference birds. Due to the limited information available on harpy eagle hematology, this study will be useful to the clinical assessment of birds maintained in captivity.

  17. Efficacy of parasitological diagnosis methods in wild animals kept in captivity

    OpenAIRE

    Carvalho, Aline Feola; Barnabe, Anderson Sena; Federsoni, Igor Popovic; Ferraz, Renato Ribeiro Nogueira; Marco, Rogerio Milton De; Garcia, Isabel Priscilla

    2018-01-01

    ABSTRACT: Parasitic diseases are common in wild animals kept in captivity, and the research of these parasites is a tool used in wildlife management actions. Once the method most used in the practice of veterinary laboratories is the direct examination, it was considered appropriate to report the parasitism in captivity wildlife comparing this technique with modified methods of Hoffman, Pons and Janer (HPJ) and Willis. Fresh feces were surveyed in eleven precincts with specimens of the class ...

  18. Seroepidemiology of TmPV1 infection in captive and wild Florida manatees (Trichechus manatus latirostris).

    Science.gov (United States)

    Donà, Maria Gabriella; Rehtanz, Manuela; Adimey, Nicole M; Bossart, Gregory D; Jenson, Alfred B; Bonde, Robert K; Ghim, Shin-je

    2011-07-01

    In 1997, cutaneous papillomatosis caused by Florida manatee (Trichechus manatus latirostris [Tm]) papillomavirus 1 (TmPV1) was detected in seven captive manatees at the Homosassa Springs Wildlife State Park, Florida, USA, and, subsequently, in two wild manatees from the adjacent Homosassa River. Since then, papillomatosis has been reported in captive manatees housed in other locations, but not in wild animals. To determine TmPV1 antibody prevalence in captive and wild manatees sampled at various locations throughout Florida coastal regions, virus-like particles, composed of the L1 capsid protein of TmPV1, were generated with a baculovirus expression system and used to measure anti-TmPV1 antibodies in an enzyme-linked immunosorbent assay. Serologic analysis of 156 manatees revealed a TmPV1 antibody prevalence of 26.3%, with no significant difference between captive (n=39) and wild (n=117) manatees (28.2% and 25.6%, respectively). No antibody-positive wild animal showed PV-induced cutaneous lesions, whereas papillomatosis was observed in 72.7% of antibody-positive captive manatees. Our data indicate that Florida manatees living in the wild are naturally infected by TmPV1 but rarely show TmPV1-induced papillomatosis. Hence, it appears that the wild population would not be harmed in a case of contact with captive animals without visible lesions and productive infections, which could be thus released into the wild.

  19. Spray sealing: A breakthrough in integral fuel tank sealing technology

    Science.gov (United States)

    Richardson, Martin D.; Zadarnowski, J. H.

    1989-11-01

    In a continuing effort to increase readiness, a new approach to sealing integral fuel tanks is being developed. The technique seals potential leak sources by spraying elastomeric materials inside the tank cavity. Laboratory evaluations project an increase in aircraft supportability and reliability, an improved maintainability, decreasing acquisition and life cycle costs. Increased usable fuel volume and lower weight than conventional bladders improve performance. Concept feasibility was demonstrated on sub-scale aircraft fuel tanks. Materials were selected by testing sprayable elastomers in a fuel tank environment. Chemical stability, mechanical properties, and dynamic durability of the elastomer are being evaluated at the laboratory level and in sub-scale and full scale aircraft component fatigue tests. The self sealing capability of sprayable materials is also under development. Ballistic tests show an improved aircraft survivability, due in part to the elastomer's mechanical properties and its ability to damp vibrations. New application equipment, system removal, and repair methods are being investigated.

  20. Snake River Sockeye Salmon Captive Broodstock; Research Element, 1993 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Keith A.

    1995-12-01

    In 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. Initial steps to recover the species include the establishment of captive broodstocks at the Eagle Fish Hatchery in Eagle, Idaho. Research and recovery activities for sockeye conducted by the Idaho Department of Fish and Game during the period of April 1993 to April 1994 are covered by this report. Eight anadromous adults (two female and six male) returned to the Redfish Lake Creek trap this year and were spawned at the Sawtooth Hatchery near Stanley, Idaho. Fecundity was 3160 for each female. The mean fertilization rate was 52% for female {open_quotes}A{close_quotes} and 65% for female {open_quotes}B.{close_quotes} Captive broodstock also spawned as well as residual sockeye captured in a Merwin trap in Redfish Lake. Spawning data from 72 fish spawned during this period is included in this report. Captive broodstock also matured later than normal (winter and spring 1994). Fish were spawned and samples were taken to investigate reasons for poor fertilization rates. Twenty-four out migrants of 1991 were selected for return to Redfish Lake for volitional spawning. Releases were made in August of 1993. All fish were implanted with sonic tags and tracking of this group began soon after the release to identify spawning-related activities. A research project is being conducted on captive broodstock diets. The project will investigate the effect of diet modification on spawn timing, gamete quality, and fertilization rates. A second project used ultrasound to examine fish for sexual maturity. The goal was to obtain a group a fish to be released f or volitional spawning. A total of 44 fish were found to be mature. The performance of all captive groups held at Eagle are included in this report.

  1. Evolution of Peromyscus leucopus mice in response to a captive environment.

    Directory of Open Access Journals (Sweden)

    Robert C Lacy

    Full Text Available Many wildlife species are propagated in captivity as models for behavioral, physiological, and genetic research or to provide assurance populations to protect threatened species. However, very little is known about how animals evolve in the novel environment of captivity. The histories of most laboratory strains are poorly documented, and protected populations of wildlife species are usually too small and too short-term to allow robust statistical analysis. To document the evolutionary change in captive breeding programs, we monitored reproduction and behavior across 18 generations in six experimental populations of Peromyscusleucopus mice started from a common set of 20 wild-caught founders. The mice were propagated under three breeding protocols: a strategy to retain maximal genetic diversity, artificial selection against stereotypic behaviors that were hypothesized to reflect poor adaptation to captivity, and random bred controls. Two replicates were maintained with each protocol, and inter-replicate crosses at generations 19 and 20 were used to reverse accumulated inbreeding. We found that one of the stereotypic behaviors (repetitive flipping was positively associated with reproductive fitness, while the other (gnawing was relatively invariant. Selection to reduce these stereotypic behaviors caused marked reduction in reproduction, and populations not under artificial selection to reduce these behaviors responded with large increases in flipping. In non-selected populations, there was rapid evolution toward much higher proportion of pairs breeding and more rapid conception. Litter size, pup survival, and weaning mass all declined slowly, to the extent that would be predicted based on inbreeding depression. Inter-crossing between replicate populations reversed these declines in fitness components but did not reverse the changes in behavior or the accelerated breeding. These findings indicate that adaptation to captivity can be rapid

  2. Magnetically Actuated Seal, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — FTT proposes development of a magnetically actuated dynamic seal. Dynamic seals are used throughout the turbopump in high-performance, pump-fed, liquid rocket...

  3. Magnetically Actuated Seal, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — FTT proposes development of a magnetically actuated dynamic seal. Dynamic seals are used throughout the turbopump in high-performance, pump-fed, liquid rocket...

  4. Reproductive seasonality in captive wild ruminants: implications for biogeographical adaptation, photoperiodic control, and life history.

    Science.gov (United States)

    Zerbe, Philipp; Clauss, Marcus; Codron, Daryl; Bingaman Lackey, Laurie; Rensch, Eberhard; Streich, Jürgen W; Hatt, Jean-Michel; Müller, Dennis W H

    2012-11-01

    relationship. Only 11 species (all originating from lower latitudes) were considered to change their reproductive pattern distinctively between the wild and captivity, with 10 becoming less seasonal (but not aseasonal) in human care, indicating that seasonality observed in the wild was partly resource-associated. Only one species (Antidorcas marsupialis) became more seasonal in captivity, presumably because resource availability in the wild overrules the innate photoperiodic response. Reproductive seasonality explains additional variance in the body mass-gestation period relationship, with more seasonal species having shorter gestation periods for their body size. We conclude that photoperiodism, and in particular absolute day length, are genetically fixed triggers for reproduction that may be malleable to some extent by body condition, and that plasticity in gestation length is an important facilitator that may partly explain the success of ruminant radiation to high latitudes. Evidence for an anti-predator strategy involving seasonal reproduction is limited to African species. Reproductive seasonality following rainfall patterns may not be an adaptation to give birth in periods of high resource availability but an adaptation to allow conception only at times of good body condition. © 2012 The Authors. Biological Reviews © 2012 Cambridge Philosophical Society.

  5. Czechs and Slovaks in Russian Captivity during World War I (1914-1918

    Directory of Open Access Journals (Sweden)

    Oksana E. Dmitrieva

    2013-01-01

    Full Text Available The article is focused on the features of more than 250 000 Czechs and Slovaks in Russian captivity during World War I: the amount, quartering and supply benefits, work in various sectors of the Russian economy, military units formation, social and national organizations activities, charity support. The conditions of Czechs and Slovaks captivity are recollected. New sources are introduced into scientific use.

  6. Spawning data - Snake River sockeye salmon captive propagation

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gene rescue captive broodstock program was established for ESA-listed endangered Snake River sockeye salmon from Redfish Lake, Idaho. The program has consisted of...

  7. Production data - Snake River sockeye salmon captive propagation

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gene rescue captive broodstock program was established for ESA-listed endangered Snake River sockeye salmon from Redfish Lake, Idaho. The program has consisted of...

  8. Growth data - Snake River sockeye salmon captive propagation

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gene rescue captive broodstock program was established for ESA-listed endangered Snake River sockeye salmon from Redfish Lake, Idaho. The program has consisted of...

  9. Broodyear data - Snake River sockeye salmon captive propagation

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gene rescue captive broodstock program was established for ESA-listed endangered Snake River sockeye salmon from Redfish Lake, Idaho. The program has consisted of...

  10. Guide to optimized replacement of equipment seals

    International Nuclear Information System (INIS)

    Gleason, J.F.

    1990-03-01

    A reevaluation of current scheduled replacement intervals of polymeric seals in plant equipment can achieve significant benefits. Information is provided which has the potential for increasing replacement intervals based on better information on how seals have performed through unique nuclear industry tests to qualify equipment, improved elastomers and increased knowledge of the failure mechanisms and related performance. The research was performed by reviewing applications of elastomeric seals in nuclear plants and practice associated with defining seal replacement intervals in the nuclear power and other industries. Performance indicators and how they predict degradation of seals were evaluated. Guidelines and a flow chart for reevaluating seal replacement intervals are provided. 29 refs., 38 figs., 8 tabs

  11. Analysis of end-face seals by FEM

    Directory of Open Access Journals (Sweden)

    Juraszek J.

    2002-09-01

    Full Text Available The end face-seals joint simultaneously the function of seal, bearing and heat exchanger. In order to improve the design of end-face seals the analysis of this type of joint by means of finite element method, was developed. The temperature distribution is indispensable to the analysis of displacement and stress in this type of face seal. In this work the values of temperature and stress in end-face seals were calculated. The numerical results were confirmed by measurements in the laboratory.

  12. Causes and correlates of calf mortality in captive Asian elephants (Elephas maximus.

    Directory of Open Access Journals (Sweden)

    Khyne U Mar

    Full Text Available Juvenile mortality is a key factor influencing population growth rate in density-independent, predation-free, well-managed captive populations. Currently at least a quarter of all Asian elephants live in captivity, but both the wild and captive populations are unsustainable with the present fertility and calf mortality rates. Despite the need for detailed data on calf mortality to manage effectively populations and to minimize the need for capture from the wild, very little is known of the causes and correlates of calf mortality in Asian elephants. Here we use the world's largest multigenerational demographic dataset on a semi-captive population of Asian elephants compiled from timber camps in Myanmar to investigate the survival of calves (n = 1020 to age five born to captive-born mothers (n = 391 between 1960 and 1999. Mortality risk varied significantly across different ages and was higher for males at any age. Maternal reproductive history was associated with large differences in both stillbirth and liveborn mortality risk: first-time mothers had a higher risk of calf loss as did mothers producing another calf soon (<3.7 years after a previous birth, and when giving birth at older age. Stillbirth (4% and pre-weaning mortality (25.6% were considerably lower than those reported for zoo elephants and used in published population viability analyses. A large proportion of deaths were caused by accidents and lack of maternal milk/calf weakness which both might be partly preventable by supplementary feeding of mothers and calves and work reduction of high-risk mothers. Our results on Myanmar timber elephants with an extensive keeping system provide an important comparison to compromised survivorship reported in zoo elephants. They have implications for improving captive working elephant management systems in range countries and for refining population viability analyses with realistic parameter values in order to predict future population

  13. Redfish Lake Sockeye Salmon Captive Broodstock Rearing and Research, 1993 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Flagg, Thomas A.

    1994-11-01

    The National Marine Fisheries Service (NMFS), in cooperation with Idaho and BPA, has established captive broodstocks to aid recovery of endangered Snake River sockeye salmon. NMFS is currently maintaining four separate Redfish Lake sockeye Salmon captive broodstocks; all these broodstocks are being reared full-term to maturity in fresh (well) water. Experiments are also being conducted on nonendangered 1990 and 1991-brood Lake Wenatchee (WA) sockeye salmon to compare effects on survival and reproduction to maturity in fresh water and seawater; for both brood-years, fish reared in fresh water were larger than those reared in seawater. Data from captive rearing experiments suggest a ranking priority of circular tanks supplied with pathogen-free fresh water, circular tanks supplied with pumped/filtered/uv-sterilized seawater, and seawater net-pens for rearing sockeye salmon to maturity.

  14. The effects of hibernation and captivity on glucose metabolism and thyroid hormones in American black bear (Ursus americanus).

    Science.gov (United States)

    McCain, Stephanie; Ramsay, Ed; Kirk, Claudia

    2013-06-01

    American black bears (Ursus americanus) have been shown to become transiently insulin resistant and hypothyroid during winter, but no studies have investigated these changes in long-term captive bears or in bears which remain awake year-round. Wild, captive hibernating, and captive nonhibernating bears were evaluated at times corresponding to three of their major physiologic stages: fall (hyperphagic stage), winter (hibernation stage), and summer (normal activity stage). Combined insulin and glucose tolerance tests and thyroid hormone profiles were performed on all bears during each stage. All three groups of bears had evidence of insulin resistance during the winter, as compared to the summer or fall, based on glucose tolerance curves. Analysis of thyroid hormone concentration varied and distinct patterns or similarities were not apparent. While obesity in captive American black bears is multifactorial, the finding that, regardless of their ability to hibernate, captive bears retain similar physiology to their wild counterparts indicates that captive bears' complex physiologic changes need to be addressed in their management.

  15. Sealing device and method for sealing fractures or leaks in wall or formation surrounding tube-shaped channel

    DEFF Research Database (Denmark)

    2014-01-01

    The sealing device (1) includes an elongated body (5) adapted to be introduced into a tube-shaped channel (2) and including a sealing fluid placement section (6) arranged between a first and a second annular flow barrier (7, 8). The elongated body further includes a sealing fluid activation secti...

  16. Quick-sealing design for radiological containment

    International Nuclear Information System (INIS)

    Rampdla, D.S.; Speer, E.

    1991-01-01

    This patent describes a quick-sealing assembly and method for forming an adhesive seal on opposite sides of a mechanical seal for a flexible containment bag of the type used for working with radioactively contaminated objects. The assembly includes an elongated mechanical fastener having opposing engaging members affixed at a predetermined distance from each of the elongated edges, with an adhesive layer formed between the mechanical fastener and the elongated edge such that upon engagement of the mechanical fastener and adhesive layers to opposing containment fabric, a neat triple hermetic seal is formed

  17. Quick-sealing design for radiological containment

    International Nuclear Information System (INIS)

    Rampolia, D.S.; Speer, E.

    1990-01-01

    This patent describes a quick-sealing assembly and method for forming an adhesive seal on opposite sides of a mechanical seal for a flexible containment bag of the type used for working with radioactively contaminated objects. The assembly includes an elongated mechanical fastener having opposing engaging members affixed at a predetermined distance from each of the elongated edges, with an adhesive layer formed between the mechanical fastener and the elongated edge such that upon engagement of the mechanical fastener and adhesive layers to opposing containment fabric, a neat triple hermetic seal is formed

  18. Quick-sealing design for radiological containment

    Science.gov (United States)

    Rampolia, Donald S.; Speer, Elmer

    1990-01-01

    A quick-sealing assembly and method for forming an adhesive seal on opposite sides of a mechanical seal for a flexible containment bag of the type used for working with radioactively contaminated objects. The assembly includes an elongated mechanical fastener having opposing engaging members affixed at a predetermined distance from each of the elongated edges, with an adhesive layer formed between the mechanical fastener and the elongated edge such that upon engagement of the mechanical fastener and adhesive layers to opposing containment fabric, a neat triple hermetic seal is formed.

  19. Auto-identification fiberoptical seal verifier

    International Nuclear Information System (INIS)

    Yamamoto, Yoichi; Mukaiyama, Takehiro

    1998-08-01

    An auto COBRA seal verifier was developed by Japan Atomic Energy Research Institute (JAERI) to provide more efficient and simpler inspection measures for IAEA safeguards. The verifier is designed to provide means of a simple, quantitative and objective judgment on in-situ verification for the COBRA seal. The equipment is a portable unit with hand-held weight and size. It can be operated by battery or AC power. The verifier reads a COBRA seal signature by using a built-in CCD camera and carries out the signature comparison procedure automatically on digital basis. The result of signature comparison is given as a YES/NO answer. The production model of the verifier was completed in July 1996. The development was carried out in collaboration with Mitsubishi Heavy Industries, Ltd. This report describes the design and functions of the COBRA seal verifier and the results of environmental and functional tests. The development of the COBRA seal verifier was carried out in the framework of Japan Support Programme for Agency Safeguards (JASPAS) as a project, JD-4 since 1981. (author)

  20. The use of dual material seals for packaging

    International Nuclear Information System (INIS)

    Temus, C.J.; Nichols, J.C.

    2004-01-01

    The use of dual material seals, metal and elastomeric for a transportation package, provides a viable option for packages requiring high temperature seal capability. Allowing the seal area to go to higher temperatures then allowed for all elastomeric seal reduce the necessity of providing thermal protection during a postulated accident condition fire. It also increases the options for impact limiting features that do not also mitigate the affects of accident thermal events. Typically, high temperature seals require the use of metal O-rings. Only one seal (typically identified as the containment seal) needs to survive the hypothetical accident conditions, including the high temperatures that may occur during the prescribed hypothetical thermal event. However, to expedite the assembly leakage rate testing of radioactive material packages, a dual O-ring seal arrangement is often used to allow creation of a relatively small volume test cavity between the seals. For any package that is being used on a frequent basis, the total cost of seals can be significantly reduced by using an elastomeric seal as the secondary seal. The elastomeric seal is not the containment boundary seal and does not need to survive the high temperature condition. To get the dual material O-ring seals to seat properly, a different approach has to be taken than with closure of a radioactive material package that does not use metallic O-ring(s). A metal O-ring requires an application of a seating force while the elastomeric package requires a certain percentage of deformation. This is further complicated when the seating force is developed using a multi-bolt closure. Because of the nature of multi-bolt closures, elastic interaction prevents the equal application of force. This paper develops the methods involved in properly closing and establishing containment when using dual material seals with a multi-bolt closure. These methods were demonstrated in two production casks requiring testing leak

  1. HFCVD Diamond-Coated Mechanical Seals

    Directory of Open Access Journals (Sweden)

    Raul Simões

    2018-05-01

    Full Text Available A mechanical seal promotes the connection between systems or mechanisms, preventing the escape of fluids to the exterior. Nonetheless, due to extreme working conditions, premature failure can occur. Diamond, due to its excellent properties, is heralded as an excellent choice to cover the surface of these devices and extend their lifetime. Therefore, the main objective of this work was to deposit diamond films over mechanical seals and test the coated seals on a water pump, under real working conditions. The coatings were created by hot filament chemical vapor deposition (HFCVD and two consecutive layers of micro- and nanocrystalline diamond were deposited. One of the main difficulties is the attainment of a good adhesion between the diamond films and the mechanical seal material (WC-Co. Nucleation, deposition conditions, and pre-treatments were studied to enhance the coating. Superficial wear or delamination of the film was investigated using SEM and Raman characterization techniques, in order to draw conclusions about the feasibility of these coatings in the WC-Co mechanical seals with the purpose of increasing their performance and life time. The results obtained gave a good indication about the feasibility of this process and the deposition conditions used, with the mechanical seals showing no wear and no film delamination after a real work environment test.

  2. Effect of Captive Environment on Plasma Cortisol Level and Behavioral Pattern of Bengal Tigers (Panthera tigris tigris

    Directory of Open Access Journals (Sweden)

    S. Sajjad, U. Farooq1*, M. Anwar, A. Khurshid2 and S.A. Bukhari1

    2011-06-01

    Full Text Available Captive environment in zoological parks often do not provide optimum conditions for natural behaviors due to spatial constraints and negative public reaction. These factors elicit stereotypic behavior in tigers such as pacing, head bobbing and aimless repetition of some movements, and are considered to be an indication of stress. The present study was conducted to assess the effect of captivity on the plasma cortisol level and behavioral pattern in Bengal tigers (Panthera tigris tigris. Tigers kept in captivity at the Lahore zoo (n=4 and in semi natural environment at the Lahore Wildlife Park (n=6 were used for this study, and standard protocols of housing and sampling were observed. The mean plasma cortisol values for the captive animals and those kept in a semi natural environment were 34.48±1.33 and 39.22±3.16µg/dl, respectively; and were statistically non significant. Similarly, no significant difference in the plasma cortisol levels was observed among the individuals within each form of captivity. From the behavioral survey it was observed that the time spent in pacing and resting was much longer for captive animals than animals confined to the semi natural environment. Thus, Technically monitored “Environmental Enrichment’ plans need to be devised which are as close as possible to the natural environment of the captive animals in order to achieve their utmost performance.

  3. Laboratory studies of fluid flow through borehole seals

    International Nuclear Information System (INIS)

    South, D.L.

    1983-01-01

    Boreholes in the vicinity of a nuclear waste repository must be reliably sealed to prevent rapid migration of radionuclide contaminated water from the vicinity of the repository to the accessible environment. Few data currently exist regarding the effectiveness of borehole sealing. The objective of this research was to assess the performance of borehole seals under laboratory conditions, particularly with regard to varying stress fields. The approach used to evaluate borehole seals was to compare flow through a sealed borehole with flow through intact rock. Granite, basalt, and tuff were tested, using either cement or bentonite as the seal material. The main conclusions reached as a result of the experiments is that currently existing materials are capable of forming high quality seals when placed under laboratory conditions. Variation of triaxial stress state about a borehole does not significantly affect seal performance if the rock is stiffer than the seal material. Temperature/moisture variations (drying) degraded the quality of cement seals significantly. Performance partially recovered upon resaturation. Significant remaining questions include field emplacement techniques; field vertification of plug quality; plug performance over long time periods, particularly with respect to temperature/moisture variations and chemical stability; and radionuclide sorption capabilities. Scale effects are also important, as shafts and drifts must be sealed as well as larger diameter boreholes

  4. Miniature magnetic fluid seal working in liquid environments

    Science.gov (United States)

    Mitamura, Yoshinori; Durst, Christopher A.

    2017-06-01

    This study was carried out to develop a miniature magnetic fluid (MF) seal working in a liquid environment. The miniature MF seal is intended for use in a catheter blood pump. The requirements for the MF seal included a size of less than Ø4×4.5 mm, shaft diameter of 1 mm, sealing pressure of 200 mmHg, shaft speed of up to 40000 rpm, and life of one month. The miniature MF seal was composed of an NdFeB magnet (Ø4×Ø2×1) sandwiched between two pole pieces (Ø4×Ø1.1×0.5). A shield (Ø4×Ø1.2×1.5) was placed on the pole piece facing the liquid to minimize the influence of pump flow on the MF. The seal was installed on a Ø1 shaft. A seal was formed by injecting MF (Ms: 47.8 kA/m and η: 0.5 Pa·sec) into the gap between the pole pieces and the shaft. Total volume of the MF seal was 44 μL. A sealing pressure of 370 mmHg was obtained at motor speeds of 0-40,000 rpm. The seal remained perfect for 10 days in saline under the condition of a pump flow of 1.5 L/min (The test was terminated in accordance with plans). The seal remained intact after ethylene oxide sterilization during which the seal was exposed to high pressures. In conclusion, the newly developed MF seal will be useful for a catheter pump.

  5. Application of EIS to In Situ Characterization of Hydrothermal Sealing of Anodized Aluminum Alloys: Comparison between Hexavalent Chromium-Based Sealing, Hot Water Sealing and Cerium-Based Sealing

    OpenAIRE

    Carangelo, Anna; Curioni, Michele; Acquesta, Annalisa; Monetta, Tullio; Bellucci, Francesco

    2016-01-01

    Chromic acid anodizing has been used for almost a century to enhance corrosion protection of aerospace alloys. For some applications,hydrothermal sealing in hexavalent chromium-containing solution is required to enhance further the corrosion resistance but, due toenvironmental concerns, the use of hexavalent chromium must be discontinued. Good progress has been made to replace chromatesduring anodizing but comparatively less effort has focused on the sealing process. In this work, for the fir...

  6. Reactor coolant pump seal leakage monitoring

    International Nuclear Information System (INIS)

    Stevens, D.M.; Spencer, J.W.; Morris, D.J.; James, W.; Shugars, H.G.

    1986-01-01

    Problems with reactor coolant pump seals have historically accounted for a large percentage of unscheduled outages. Studies performed for the Electric Power Research Institute (EPRI) have shown that the replacement of coolant pump seals has been one of the leading causes of nuclear plant unavailability over the last ten years. Failures of coolant pump seals can lead to primary coolant leakage rates of 200-500 gallons per minute into the reactor building. Airborne activity and high surface contamination levels following these failures require a major cleanup effort and increases the time and personnel exposure required to refurbish the pump seals. One of the problems in assessing seal integrity is the inability to accurately measure seal leakage. Because seal leakage flow is normally very small, it cannot be sensed directly with normal flow instrumentation, but must be inferred from several other temperature and flow measurements. In operating plants the leakage rate has been quantified with a tipping-bucket gauge, a device which indicates when one quart of water has been accumulated. The tipping-bucket gauge has been used for most rainfall-intensity monitoring. The need for a more accurate and less expensive gauge has been addressed. They have developed a drop-counter precipitation sensor has been developed and optimized. The applicability of the drop-counter device to the problem of measuring seal leakage is being investigated. If a review of system specification and known drop-counter performance indicates that this method is feasible for measuring seal leak rates, a drop-counter gauge will be fabricated and tested in the laboratory. If laboratory tests are successful the gauge will be demonstrated in a pump test loop at Ontario Hydro and evaluated under simulated plant conditions. 3 references, 2 figures

  7. Numerical Investigation on Windback Seals Used in Aero Engines

    Directory of Open Access Journals (Sweden)

    Michael Flouros

    2018-01-01

    Full Text Available Seals are considered one of the most important flow elements in turbomachinery applications. The most traditional and widely known seal is the labyrinth seal but in recent years other types like the brush or carbon seals were introduced since they considerably reduce the sealing air consumption. When seals are used for sealing of aero engine bearing chambers they are subjected to high “bombardment” through oil particles which are present in the bearing chamber. These particles mainly result from the bearings as a consequence of the high rotational speeds. Particularly when carbon or brush seals are used, problems with carbon formation (coking may arise when oil gets trapped in the very tight gap of these seals. In order to prevent oil migration into the turbomachinery, particularly when the pressure difference over a seal is small or even negligible, significant improvement can be achieved through the introduction of so called windback seals. This seal has a row of static helical teeth (thread and below this thread a scalloped or smooth shaft section is rotating. Depending on the application, a windback seal can be used alone or as a combination with another seal (carbon, brush or labyrinth seal. A CFD analysis carried out with ANSYS CFX version 11 is presented in this paper with the aim to investigate this seal type. The simulations were performed by assuming a two-phase flow of air and oil in the bearing compartment. Design parameters like seal clearance, thread size, scallop width, were investigated at different operating conditions.

  8. Seasonal changes in background levels of deuterium and oxygen-18 prove water drinking by harp seals, which affects the use of the doubly labelled water method.

    Science.gov (United States)

    Nordøy, Erling S; Lager, Anne R; Schots, Pauke C

    2017-12-01

    The aim of this study was to monitor seasonal changes in stable isotopes of pool freshwater and harp seal ( Phoca groenlandica ) body water, and to study whether these potential seasonal changes might bias results obtained using the doubly labelled water (DLW) method when measuring energy expenditure in animals with access to freshwater. Seasonal changes in the background levels of deuterium and oxygen-18 in the body water of four captive harp seals and in the freshwater pool in which they were kept were measured over a time period of 1 year. The seals were offered daily amounts of capelin and kept under a seasonal photoperiod of 69°N. Large seasonal variations of deuterium and oxygen-18 in the pool water were measured, and the isotope abundance in the body water showed similar seasonal changes to the pool water. This shows that the seals were continuously equilibrating with the surrounding water as a result of significant daily water drinking. Variations in background levels of deuterium and oxygen-18 in freshwater sources may be due to seasonal changes in physical processes such as precipitation and evaporation that cause fractionation of isotopes. Rapid and abrupt changes in the background levels of deuterium and oxygen-18 may complicate calculation of energy expenditure by use of the DLW method. It is therefore strongly recommended that analysis of seasonal changes in background levels of isotopes is performed before the DLW method is applied on (free-ranging) animals, and to use a control group in order to correct for changes in background levels. © 2017. Published by The Company of Biologists Ltd.

  9. Serratospiculosis in Captive Peregrine Falcons (Falco peregrinus) in Switzerland.

    Science.gov (United States)

    Veiga, Inês B; Schediwy, Marion; Hentrich, Brigitte; Frey, Caroline F; Marreros, Nelson; Stokar-Regenscheit, Nadine

    2017-09-01

    Infection with Serratospiculum species was identified in a captive peregrine falcon (Falco peregrinus) in Switzerland. Pathologic and parasitologic examination results revealed generalized severe granulomatous airsacculitis, with intralesional adults, larvae, and eggs of Serratospiculum species. Subsequently, an individual coprological analysis of the remaining 15 falcons (peregrine falcons and gyrfalcons [Falco rusticolus]) from the same owner was performed. Eggs of Serratospiculum species (4 birds) and Capillaria species (11 birds), and oocysts of Caryospora species (1 bird) were detected. Treatment with ivermection (2 mg/kg SC) was effective, as none of the falcons excreted Serratospiculum species eggs 10 days after one dose. To our knowledge, this is the first report of infection with Serratospiculum species in captive falcons in Europe.

  10. Sealing Occlusal Dentin Caries in Permanent Molars

    DEFF Research Database (Denmark)

    Qvist, Vibeke; Borum, Mette Kit; Møller, Kirsten Dynes

    2017-01-01

    The purpose of this study was to investigate the possibility of postponing restorative intervention of manifest occlusal caries in young, permanent dentition by non-invasive sealing. This RCT-designed study included 521 occlusal lesions in 521 patients aged 6 to 17 y. Based on clinical and radiog......The purpose of this study was to investigate the possibility of postponing restorative intervention of manifest occlusal caries in young, permanent dentition by non-invasive sealing. This RCT-designed study included 521 occlusal lesions in 521 patients aged 6 to 17 y. Based on clinical...... longevity of sealings and restorations until retreatments, and 3) compare effectiveness of sealings and restorations to halt caries progression in sealed lesions and beneath restorations. Furthermore, we aimed to identify factors influencing longevity and the effectiveness of sealings and restorations.......001). The median survival time for sealings not replaced by restorations was 7.3 y (CI, 6.4 y to NA). Survival of sealings was increased in patients with low caries risk and/or excellent oral hygiene, second molars compared with first molars, and lesions not extending the middle one-third of the dentin. Survival...

  11. Steroid excretion during the ovarian cycle in captive and wild muriquis, Brachyteles arachnoides.

    Science.gov (United States)

    Ziegler, T E; Santos, C V; Pissinatti, A; Strier, K B

    1997-01-01

    Urine, feces, and copulation frequency were collected from two captive muriqui females, Brachyteles arachnoides, at the Centro de Primatologia do Rio de Janeiro following the resumption of postpartum ovarian cycles. Fecal steroid profiles from seven wild muriqui females at the Estação Biologica de Caratinga, Minas Gerais, Brazil, were compared to the captive females to determine the approximate patterns of steroid excretion relative to the urinary LH peak. Hormonal profiles from one of the captive female muriquis revealed a discrete urinary LH peak. For this female, fecal progesterone increased on the same day as the urinary LH peak, while fecal estradiol increased 6 days later and urinary steroids increased 5 days later. For both captive females, the onset of fecal progesterone increase was preceded by the onset of copulations, which occurred during at least a 5-day period. The complete fecal hormonal profiles of the one captive female for which continuos data were available were similar to those found in wild muriqui monkeys, with the onset of an increase in sustained progesterone levels occurring several days prior to the onset of sustained estradiol increase. These patterns suggest that fecal progesterone may be excreted rapidly in this species. The onset of sustained increase in fecal progesterone levels, together with the consistent delay in the onset of the sustained increase in estradiol, may provide the best indicators of the periovulatory period for muriqui females.

  12. A new perspective on the pathogenesis of chronic renal disease in captive cheetahs (Acinonyx jubatus).

    Science.gov (United States)

    Mitchell, Emily P; Prozesky, Leon; Lawrence, John

    2018-01-01

    The sustainability of captive cheetah populations is limited by high mortality due to chronic renal disease. This necropsy study, conducted on 243 captive cheetahs from one institution, investigated the relationships between focal palatine erosions, gastritis, enterocolitis, glomerulosclerosis, chronic renal infarcts, renal cortical and medullary fibrosis, and renal medullary amyloidosis at death. Associations between the individual renal lesions and death due to chronic renal disease and comparisons of lesion prevalence between captive bred and wild born and between normal and king coated cheetahs were also assessed. All lesions were significantly positively correlated with age at death. Renal medullary fibrosis was the only lesion associated with the likelihood of death being due to chronic renal disease, and cheetahs with this lesion were younger, on average, than cheetahs with other renal lesions. Alimentary tract lesions were not associated with amyloidosis. All lesions, except for palatine erosions, were more common in wild born than in captive bred cheetahs; the former were older at death than the latter. Having a king coat had no clear effect on disease prevalence. These results suggest that age and renal medullary fibrosis are the primary factors influencing the pathogenesis of chronic renal disease in captive cheetahs. Apart from amyloidosis, these findings are analogous to those described in chronic renal disease in domestic cats, which is postulated to result primarily from repetitive hypoxic injury of renal tubules, mediated by age and stress. Cheetahs may be particularly susceptible to acute renal tubular injury due to their propensity for stress and their extended life span in captivity, as well as their adaptation for fecundity (rather than longevity) and adrenaline-mediated high speed prey chases. The presence of chronic renal disease in subadult cheetahs suggests that prevention, identification and mitigation of stress are critical to the

  13. Floating seal system for rotary devices

    Science.gov (United States)

    Banasiuk, H.A.

    1983-08-23

    This invention relates to a floating seal system for rotary devices to reduce gas leakage around the rotary device in a duct and across the face of the rotary device to an adjacent duct. The peripheral seal bodies are made of resilient material having a generally U-shaped cross section wherein one of the legs is secured to a support member and the other of the legs forms a contacting seal against the rotary device. The legs of the peripheral seal form an extended angle of intersection of about 10[degree] to about 30[degree] in the unloaded condition to provide even sealing forces around the periphery of the rotary device. The peripheral seal extends around the periphery of the support member except where intersected by radial seals which reduce gas leakage across the face of the rotary device and between adjacent duct portions. The radial seal assembly is fabricated from channel bars, the smaller channel bar being secured to the divider of the support member and a larger inverted rigid floating channel bar having its legs freely movable over the legs of the smaller channel bar forming therewith a tubular channel. A resilient flexible tube is positioned within the tubular channel for substantially its full length to reduce gas leakage across the tubular channel. A spacer extends beyond the face of the floating channel near each end of the floating channel a distance to provide desired clearance between the floating channel and the face of the rotary device. 5 figs.

  14. Metal and elastomer seal tests for accelerator applications

    International Nuclear Information System (INIS)

    Welch, K.M.; McIntyre, G.T.; Tuozzolo, J.E.; Skelton, R.; Pate, D.J.; Gill, S.M.

    1989-01-01

    The vacuum system of the Alternating Gradient Synchrotron (AGS) at Brookhaven National Laboratory has more than a thousand metal vacuum seals. Also, numerous elastomer seals are used throughout the AGS to seal large beam component chambers. An accelerator upgrade program is being implemented to reduce the AGS operating pressure by x100 and improve the reliability of the vacuum system. This paper describes work in progress on metal and elastomer vacuum seals to help meet those two objectives. Tests are reported on the sealing properties of a variety of metal seals used on different sealing surfaces. Results are also given on reversible sorption properties of certain elastomers. 16 refs., 6 figs., 4 tabs

  15. Apparatus and method for inspecting a sealed container

    Science.gov (United States)

    Harmon, J Frank [Pocatello, ID; Jones, James L [Idaho Falls, ID; Hunt, Alan W [Pocatello, ID; Spaulding, Randy J [Pocatello, ID; Smith, Michael [Phoenix, AZ

    2009-03-24

    An apparatus for inspecting a sealed container is disclosed and which includes a pulsed electron accelerator which is positioned in spaced relation relative to a first side of the sealed container, and which produces a pulsed beam of photons which passes through the sealed container and any contents enclosed within the sealed container; a detector positioned in spaced relation relative to a second, opposite side of the sealed container, and which receives the pulsed beam of photons which passes through the contents of the sealed container, and which produces an output signal; and a computer for developing a visible image from the output signal of the detector which depicts the contents of the sealed container.

  16. Seal analysis technology for reactor pressure vessel

    International Nuclear Information System (INIS)

    Zheng Liangang; Zhang Liping; Yang Yu; Zang Fenggang

    2009-01-01

    There is the coolant with radiation, high temperature and high pressure in the reactor pressure vessel (RPV). It is closely correlated to RPV sealing capability whether the whole nuclear system work well or not. The aim of this paper is to study the seal analysis method and technology, such as the pre-tensioning of the bolt, elastoplastic contact and coupled technology of thermal and structure. The 3 D elastoplastic seal analysis method really and generally consider the loads and model the contact problem with friction between the contact plates. This method is easier than the specialized seal program and used widely. And it is more really than the 2 D seal analysis method. This 3 D elastoplastic seal analysis method has been successfully used in the design and analysis of RPV. (authors)

  17. Sealed radioactive sources toolkit

    International Nuclear Information System (INIS)

    Mac Kenzie, C.

    2005-09-01

    The IAEA has developed a Sealed Radioactive Sources Toolkit to provide information to key groups about the safety and security of sealed radioactive sources. The key groups addressed are officials in government agencies, medical users, industrial users and the scrap metal industry. The general public may also benefit from an understanding of the fundamentals of radiation safety

  18. On a Luxation of the skull-atlas joint and consecutive ankylosis in a Grey Seal, Halichoerus grypus (Fabricius, 1791), with notes on other Grey Seals from the Netherlands

    NARCIS (Netherlands)

    Bree, van P.J.H.

    1972-01-01

    On January 3, 1969, about 1 km south of Zandvoort, Netherlands, a very young female Grey Seal was found on the beach. The animal was exhausted and in a bad condition and could therefore be caught. It was taken to the Amsterdam Zoo where, in spite of good care, it died on February 17 of the same

  19. Evidence for chronic stress in captive but not free-ranging cheetahs (Acinonyx jubatus) based on adrenal morphology and function.

    Science.gov (United States)

    Terio, Karen A; Marker, Laurie; Munson, Linda

    2004-04-01

    The cheetah (Acinonyx jubatus) is highly endangered because of loss of habitat in the wild and failure to thrive in captivity. Cheetahs in zoos reproduce poorly and have high prevalences of unusual diseases that cause morbidity and mortality. These diseases are rarely observed in free-ranging cheetahs but have been documented in cheetahs that have been captured and held in captive settings either temporarily or permanently. Because captivity may be stressful for this species and stress is suspected as contributing to poor health and reproduction, this study aimed to measure chronic stress by comparing baseline concentrations of fecal corticoid metabolites and adrenal gland morphology between captive and free-ranging cheetahs. Additionally, concentrations of estradiol and testosterone metabolites were quantified to determine whether concentrations of gonadal steroids correlated with corticoid concentration and to assure that corticosteroids in the free-ranging samples were not altered by environmental conditions. Concetntrations of fecal corticoids, estradiol, and testosterone were quantified by radioimmunoassay in 20 free-ranging and 20 captive cheetahs from samples collected between 1994 and 1999. Concentrations of baseline fecal corticoids were significantly higher (p = 0.005) in captive cheetahs (196.08 +/- 36.20 ng/g dry feces) than free-ranging cheetahs (71.40 +/- 14.35 ng/g dry feces). Testosterone concentrations were lower in captive male cheetahs (9.09 +/- 2.84 ng/g dry feces) than in free-ranging cheetahs (34.52 +/- 12.11 ng/g dry feces), which suggests suppression by elevated corticoids in the captive males. Evidence for similar sulppression of estradiol concentrations in females was not present. Adrenal corticomedullary ratios were determined on midsagittal sections of adrenal glands from 13 free-ranging and 13 captive cheetahs obtained between 1991 and 2002. The degree of vacuolation of cortical cells in the zona fasciculata was graded for each animal

  20. Method and system to facilitate sealing in gas turbines

    Science.gov (United States)

    Morgan, Victor John; Foster, Gregory Thomas; Sarawate, Neelesh Nandkumar

    2017-09-12

    A method and system for sealing between components within a gas turbine is provided. A first recess defined in a first component receives a seal member. A second recess defined in a second component adjacent the first component also receives the seal member. The first and second recesses are located proximate a hot gas path defined through the gas turbine, and define circumferential paths about the turbine axis. The seal member includes a sealing face that extends in a direction substantially parallel to the turbine axis. The seal member also includes a plurality of seal layers, wherein at least one of the seal layers includes at least one stress relief region for facilitating flexing of the first seal member.

  1. Silicone foam for penetration seal

    International Nuclear Information System (INIS)

    Hoshino, Yoshikazu

    1986-01-01

    In nuclear power plants or general buildings, it is very important to form a fire-resistant seal around cables, cable trays and conduits passing through a wall or a floor. Rockwool, asbestos, glasswool and flame-retarded urethane foam have so far been used for these purposes. However, they were not satisfactory in sealing property, workability and safety. The silicone foam newly developed, ''TOSSEAL'' 300, has cleared these defects. It has now come to be used for fire resistant seal in nuclear power plants. (author)

  2. Infiltrating/sealing proximal caries lesions

    DEFF Research Database (Denmark)

    Martignon, S; Ekstrand, K R; Gomez, J

    2012-01-01

    This randomized split-mouth controlled clinical trial aimed at assessing the therapeutic effects of infiltration vs. sealing for controlling caries progression on proximal surfaces. Out of 90 adult students/patients assessed at university clinics and agreeing to participate, 39, each with 3...... differences in lesion progression between infiltration and placebo (P = 0.0012) and between sealing and placebo (P = 0.0269). The study showed that infiltration and sealing are significantly better than placebo treatment for controlling caries progression on proximal lesions. No significant difference...

  3. Cost saving synergistic shaft seal

    Science.gov (United States)

    Ludwig, L. P.; Strom, T. N.

    1976-01-01

    Segmented carbon rings, used to replace elastomeric seal lip, provide resistance to high temperatures generated in lubricating film. Machining and close manufacturing tolerances of conventional segmented seal are avoided by mounting segmented rings in elastomeric flex section.

  4. Development of a ceramic tamper indicating seal: SRNL contributions

    International Nuclear Information System (INIS)

    Krementz, Dan; Brinkman, Kyle S.; Martinez-Rodriguez, Michael J.; Mendez-Torres, Adrian E.; Weeks, George E.

    2013-01-01

    Savannah River National Laboratory (SRNL) and Sandia National Laboratories (SNL) are collaborating on development of a Ceramic Seal, also sometimes designated the Intrinsically Tamper Indicating Ceramic Seal (ITICS), which is a tamper indicating seal for international safeguards applications. The Ceramic Seal is designed to be a replacement for metal loop seals that are currently used by the IAEA and other safeguards organizations. The Ceramic Seal has numerous features that enhance the security of the seal, including a frangible ceramic body, protective and tamper indicating coatings, an intrinsic unique identifier using Laser Surface Authentication, electronics incorporated into the seal that provide cryptographic seal authentication, and user-friendly seal wire capture. A second generation prototype of the seal is currently under development whose seal body is of Low Temperature Co-fired Ceramic (LTCC) construction. SRNL has developed the mechanical design of the seal in an iterative process incorporating comments from the SNL vulnerability review team. SRNL is developing fluorescent tamper indicating coatings, with recent development focusing on optimizing the durability of the coatings and working with a vendor to develop a method to apply coatings on a 3-D surface. SRNL performed a study on the effects of radiation on the electronics of the seal and possible radiation shielding techniques to minimize the effects. SRNL is also investigating implementation of Laser Surface Authentication (LSA) as a means of unique identification of each seal and the effects of the surface coatings on the LSA signature.

  5. DEVELOPMENT OF A CERAMIC TAMPER INDICATING SEAL: SRNL CONTRIBUTIONS

    Energy Technology Data Exchange (ETDEWEB)

    Krementz, D.; Brinkman, K.; Martinez-Rodriguez, M.; Mendez-Torres, A.; Weeks, G.

    2013-06-03

    Savannah River National Laboratory (SRNL) and Sandia National Laboratories (SNL) are collaborating on development of a Ceramic Seal, also sometimes designated the Intrinsically Tamper Indicating Ceramic Seal (ITICS), which is a tamper indicating seal for international safeguards applications. The Ceramic Seal is designed to be a replacement for metal loop seals that are currently used by the IAEA and other safeguards organizations. The Ceramic Seal has numerous features that enhance the security of the seal, including a frangible ceramic body, protective and tamper indicating coatings, an intrinsic unique identifier using Laser Surface Authentication, electronics incorporated into the seal that provide cryptographic seal authentication, and user-friendly seal wire capture. A second generation prototype of the seal is currently under development whose seal body is of Low Temperature Co-fired Ceramic (LTCC) construction. SRNL has developed the mechanical design of the seal in an iterative process incorporating comments from the SNL vulnerability review team. SRNL is developing fluorescent tamper indicating coatings, with recent development focusing on optimizing the durability of the coatings and working with a vendor to develop a method to apply coatings on a 3-D surface. SRNL performed a study on the effects of radiation on the electronics of the seal and possible radiation shielding techniques to minimize the effects. SRNL is also investigating implementation of Laser Surface Authentication (LSA) as a means of unique identification of each seal and the effects of the surface coatings on the LSA signature.

  6. Limits to captive breeding of mammals in zoos.

    Science.gov (United States)

    Alroy, John

    2015-06-01

    Captive breeding of mammals in zoos is the last hope for many of the best-known endangered species and has succeeded in saving some from certain extinction. However, the number of managed species selected is relatively small and focused on large-bodied, charismatic mammals that are not necessarily under strong threat and not always good candidates for reintroduction into the wild. Two interrelated and more fundamental questions go unanswered: have the major breeding programs succeeded at the basic level of maintaining and expanding populations, and is there room to expand them? I used published counts of births and deaths from 1970 to 2011 to quantify rates of growth of 118 captive-bred mammalian populations. These rates did not vary with body mass, contrary to strong predictions made in the ecological literature. Most of the larger managed mammalian populations expanded consistently and very few programs failed. However, growth rates have declined dramatically. The decline was predicted by changes in the ratio of the number of individuals within programs to the number of mammal populations held in major zoos. Rates decreased as the ratio of individuals in programs to populations increased. In other words, most of the programs that could exist already do exist. It therefore appears that debates over the general need for captive-breeding programs and the best selection of species are moot. Only a concerted effort could create room to manage a substantially larger number of endangered mammals. © 2015, Society for Conservation Biology.

  7. Improved sealing for in-core systems

    International Nuclear Information System (INIS)

    Dunford, S.

    1989-01-01

    The in-core instrumentation sealing nozzles designed by Framatome have three mechanical seals in series instead of the one traditional seal, and are pressurized by simply tightening up the nozzle covers. They have been installed from the start on all Framatome PWRs, as well as having been backfitted on Belgium and Yugoslavian units and chosen for the Chinese Qinshan plant. (author)

  8. Spatial Memory in Captive Giant Anteaters (Myrmecophaga tridactyla

    Directory of Open Access Journals (Sweden)

    Stephanie M. Allard

    2014-08-01

    Full Text Available The type of learning exhibited during foraging has been studied in a large number of species. Species that feed on food sources that temporally vary in quality could be well suited for exhibiting evidence of spatial learning. The foraging strategies of captive giant anteaters were examined using an experimental foraging task. Two giant anteaters were exposed to a modified radial arm maze in order to determine whether or not they would demonstrate evidence of spatial learning. Both subjects demonstrated significant improvement in performance by visiting baited feeders more consistently across learning trials. A disruption in performance occurred when the task was reversed, indicating that giant anteaters may use spatial learning to locate food sources. Obtaining a more sound understanding of the cognitive abilities of giant anteaters may help to enhance their welfare in captive settings.

  9. Multi-Canister overpack sealing configuration

    International Nuclear Information System (INIS)

    SMITH, K.E.

    1998-01-01

    The Spent Nuclear Fuel (SNF) position regarding the Multi-Canister Overpack (MCO) sealing configuration is to initially rely on an American Society of Mechanical Engineers (ASME) Section III Subsection NB code compliant mechanical closure/sealing system to quickly and safely establish and maintain full confinement of radioactive materials prior to and during MCO fuel drying activities. Previous studies have shown the mechanical seal to be the preferred closure method, based on dose, cost, and schedule considerations. The cost and schedule impacts of redesigning the mechanical closure to a welded shield plug do not support changing the closure system. The SNF Project has determined that the combined mechanical/welded closure system meets or exceeds the regulatory requirements to provide redundant seals while accommodating key safety and schedule limitations that are unique to K Basins fuel removal effort

  10. Coupled processes in repository sealing

    International Nuclear Information System (INIS)

    Case, J.B.; Kelsall, P.C.

    1985-01-01

    The significance of coupled processes in repository sealing is evaluated. In most repository designs, shaft seals will be located in areas of relatively low temperature perturbation, in which case the coupling of temperature with stress and permeability may be less significant than the coupling between stress and permeability that occurs during excavation. Constitutive relationships between stress and permeability are reviewed for crystalline rock and rocksalt. These provide a basis for predicting the development of disturbed zones near excavations. Field case histories of the degree of disturbance are presented for two contrasting rock types - Stripa granite and Southeastern New Mexico rocksalt. The results of field investigations in both rock types confirm that hydraulic conductivity or permeability is stress dependent, and that shaft seal performance may be related to the degree that stresses are perturbed and restored near the seal

  11. Sealing glasses for titanium and titanium alloys

    Science.gov (United States)

    Brow, Richard K.; McCollister, Howard L.; Phifer, Carol C.; Day, Delbert E.

    1997-01-01

    Barium lanthanoborate sealing-glass compositions are provided comprising various combinations (in terms of mole-%) of boron oxide (B.sub.2 O.sub.3), barium oxide (BaO), lanthanum oxide (La.sub.2 O.sub.3), and at least one other oxide selected from the group consisting of aluminum oxide (Al.sub.2 O.sub.3), calcium oxide (CaO), lithium oxide (Li.sub.2 O), sodium oxide (Na.sub.2 O), silicon dioxide (SiO.sub.2), or titanium dioxide (TiO.sub.2). These sealing-glass compositions are useful for forming hermetic glass-to-metal seals with titanium and titanium alloys having an improved aqueous durability and favorable sealing characteristics. Examples of the sealing-glass compositions are provided having coefficients of thermal expansion about that of titanium or titanium alloys, and with sealing temperatures less than about 900.degree. C., and generally about 700.degree.-800.degree. C. The barium lanthanoborate sealing-glass compositions are useful for components and devices requiring prolonged exposure to moisture or water, and for implanted biomedical devices (e.g. batteries, pacemakers, defibrillators, pumps).

  12. Development of Advanced Carbon Face Seals for Aircraft Engines

    Science.gov (United States)

    Falaleev, S. V.; Bondarchuk, P. V.; Tisarev, A. Yu

    2018-01-01

    Modern aircraft gas turbine engines require the development of seals which can operate for a long time with low leakages. The basic type of seals applied for gas turbine engine rotor supports is face seal. To meet the modern requirements of reliability, leak-tightness and weight, low-leakage gas-static and hydrodynamic seals have to be developed. Dry gas seals use both gas-static and hydrodynamic principles. In dry gas seals microgrooves are often used, which ensure the reverse injection of leakages in the sealed cavity. Authors have developed a calculation technique including the concept of coupled hydrodynamic, thermal and structural calculations. This technique allows to calculate the seal performance taking into account the forces of inertia, rupture of the lubricant layer and the real form of the gap. Authors have compared the efficiency of seals with different forms of microgrooves. Results of calculations show that seal with rectangular form of microgrooves has a little gap leading to both the contact of seal surfaces and the wear. Reversible microgrooves have a higher oil mass flow rate, whereas HST micro-grooves have good performance, but they are difficult to produce. Spiral microgrooves have both an acceptable leakages and a high stiffness of liquid layer that is important in terms of ensuring of sealing performance at vibration conditions. Therefore, the spiral grooves were chosen for the developed seal. Based on calculation results, geometric dimensions were chosen to ensure the reliability of the seal operation by creating a guaranteed liquid film, which eliminates the wear of the sealing surfaces. Seals designed were tested both at the test rig and in the engine.

  13. Reactor coolant pump seals: improving their performance

    International Nuclear Information System (INIS)

    Pothier, N.E.; Metcalfe, R.

    1986-06-01

    Large CANDU plants are benefitting from transient-resistant four-year reliable reactor coolant pump seal lifetimes, a direct result of AECL's 20-year comprehensive seal improvement program involving R and D staff, manufacturers, and plant designers and operators. An overview of this program is presented, which covers seal modification design, testing, post-service examination, specialized maintenance and quality control. The relevancy of this technology to Light Water Reactor Coolant Pump Seals is also discussed

  14. Development of simplified rotating plug seal structure

    International Nuclear Information System (INIS)

    Ueta, M.; Ichimiya, M.; Kanaoka, T.; Sekiya, H.; Ueda, S.; Ishibashi, S.

    1991-01-01

    We studied a compact and simplified rotating plug seal structure and conducted experiments for key elements of the concept such us the mechanical seal structure and sodium deposit prevention system. Good characteristics were confirmed for the mechanical seal structure, which utilizes an elastomer seal and thin lathe bearing. Applicability of the density barrier concept was also confirmed as the sodium deposit prevention system. This concept can be applied to actual plants. (author)

  15. Application study of magnetic fluid seal in hydraulic turbine

    International Nuclear Information System (INIS)

    Yu, Z Y; Zhang, W

    2012-01-01

    The waterpower resources of our country are abundant, and the hydroelectric power is developed, but at present the main shaft sealing device of hydraulic turbine is easy to wear and tear and the leakage is great. The magnetic fluid seal has the advantages of no contact, no wear, self-healing, long life and so on. In this paper, the magnetic fluid seal would be used in the main shaft of hydraulic turbine, the sealing structure was built the model, meshed the geometry, applied loads and solved by using MULTIPHYSICS in ANSYS software, the influence of the various sealing structural parameters such as tooth width, height, slot width, sealing gap on the sealing property were analyzed, the magnetic fluid sealing device suitable for large-diameter shaft and sealing water was designed, the sealing problem of the hydraulic turbine main shaft was solved effectively which will bring huge economic benefits.

  16. Sealing apparatus for airfoils of gas turbine engines

    Science.gov (United States)

    Jones, R.B.

    1998-05-19

    An improved airfoil tip sealing apparatus is disclosed wherein brush seals are attached to airfoil tips with the distal ends of the brush seal fibers sealingly contacting opposing wall surfaces. Embodiments for variable vanes, stators and both cooled and uncooled turbine blade applications are disclosed. 17 figs.

  17. Reactor coolant pump shaft seal stability during station blackout

    International Nuclear Information System (INIS)

    Rhodes, D.B.; Hill, R.C.; Wensel, R.G.

    1987-05-01

    Results are presented from an investigation into the behavior of Reactor Coolant Pump shaft seals during a potential station blackout (loss of all ac power) at a nuclear power plant. The investigation assumes loss of cooling to the seals and focuses on the effect of high temperature on polymer seals located in the shaft seal assemblies, and the identification of parameters having the most influence on overall hydraulic seal performance. Predicted seal failure thresholds are presented for a range of station blackout conditions and shaft seal geometries

  18. Reactor coolant pump shaft seal stability during station blackout

    Energy Technology Data Exchange (ETDEWEB)

    Rhodes, D B; Hill, R C; Wensel, R G

    1987-05-01

    Results are presented from an investigation into the behavior of Reactor Coolant Pump shaft seals during a potential station blackout (loss of all ac power) at a nuclear power plant. The investigation assumes loss of cooling to the seals and focuses on the effect of high temperature on polymer seals located in the shaft seal assemblies, and the identification of parameters having the most influence on overall hydraulic seal performance. Predicted seal failure thresholds are presented for a range of station blackout conditions and shaft seal geometries.

  19. The Easter Seal Directory of Resident Camps for Persons with Special Health Needs.

    Science.gov (United States)

    National Easter Seal Society for Crippled Children and Adults, Chicago, IL.

    The directory of resident camps is designed for persons with special health needs (children and adults with physical, mental, social, or emotional handicaps). Published by the National Easter Seal Society for Crippled Children and Adults, the listing contains residential facilities only (day care camp program information is not included). Listed…

  20. Trace element analysis in the serum and hair of Antarctic leopard seal, Hydrurga leptonyx, and Weddell seal, Leptonychotes weddellii

    Energy Technology Data Exchange (ETDEWEB)

    Gray, Rachael [Faculty of Veterinary Science, University of Sydney, NSW 2006 Australia (Australia); Australian Marine Mammal Research Centre PO Box 20 Mosman, NSW 2088 (Australia)], E-mail: rgray@vetsci.usyd.edu.au; Canfield, Paul [Faculty of Veterinary Science, University of Sydney, NSW 2006 (Australia); Rogers, Tracey [Australian Marine Mammal Research Centre PO Box 20 Mosman, NSW 2088 (Australia); Evolution and Ecology Research Centre and School of Biological Earth and Environmental Sciences, University of New South Wales, NSW 2052 (Australia)

    2008-07-25

    Leopard seal, Hydrurga leptonyx, and Weddell seal, Leptonychotes weddellii, occupy an upper trophic level within the Antarctic ecosystem and are useful indicator species in the Southern Ocean of trace element concentrations. Reference values for the concentration of 19 trace elements were determined in the serum and hair of leopard and Weddell seals sampled in Eastern Antarctica. These reference values can be used as 'baseline' levels for monitoring trace element concentrations in these species. Greater trace element concentrations were determined in hair compared to serum, indicating different time scales of trace element accumulation in these samples. For the majority of trace elements, except for Se in the leopard seal samples and Cr in the Weddell seal samples, significant regression relationships for trace element concentrations in hair and serum were not elucidated. Significant differences were determined in the concentrations of seven out of 15 elements with hair type, moult and new, in the leopard seal; concentrations in moult hair were determined to be greater than in new hair for all elements except Zn. Hair analysis was determined to be useful for monitoring exposure to trace elements and when collected off the ice from moulting seals, hair can be employed as a non-invasive sample for trace element analysis in leopard and Weddell seals.

  1. Solid oxide fuel cell having a glass composite seal

    Science.gov (United States)

    De Rose, Anthony J.; Mukerjee, Subhasish; Haltiner, Jr., Karl Jacob

    2013-04-16

    A solid oxide fuel cell stack having a plurality of cassettes and a glass composite seal disposed between the sealing surfaces of adjacent cassettes, thereby joining the cassettes and providing a hermetic seal therebetween. The glass composite seal includes an alkaline earth aluminosilicate (AEAS) glass disposed about a viscous glass such that the AEAS glass retains the viscous glass in a predetermined position between the first and second sealing surfaces. The AEAS glass provides geometric stability to the glass composite seal to maintain the proper distance between the adjacent cassettes while the viscous glass provides for a compliant and self-healing seal. The glass composite seal may include fibers, powders, and/or beads of zirconium oxide, aluminum oxide, yttria-stabilized zirconia (YSZ), or mixtures thereof, to enhance the desirable properties of the glass composite seal.

  2. A note on reproduction of Didelphis marsupialis in captivity

    Directory of Open Access Journals (Sweden)

    Maria de Fatima Dezonne Motta

    1983-12-01

    Full Text Available Conditions leading to successful reproduction of Didelphis marsupialis in captivity are described. A trial involving four mating pairs which had been maintained at least four months in the laboratory resulted in three litters and one false pregnancy. This is, to our knowledge, the first record of successful breeding of this species in captivity.As condições utilizadas para o sucesso da reprodução de D. marsupialis em cativeiro são descritas. Esta tentativa envolveu quatro casais, os quais haviam sido mantidos no mínimo por quatro meses em laboratório e resultou em três ninhadas e uma falsa prenhez. Julgamos ser este o primeiro registro da reprodução desta espécie em cativeiro.

  3. The oxidative stability of chilled and frozen pilchards used as feed for captive southern bluefin tuna

    DEFF Research Database (Denmark)

    Fitz-Gerald, C.H.; Bremner, Allan

    1998-01-01

    . Vacuum packaging in a film of low permeability to oxygen was less effective than glazing and is not recommended due to cost. Pilchards in which oxidation had commenced before freezing continued to oxidise in frozen storage irrespective of whether they were glazed or vacuum packed. It was thus thoroughly...... demonstrated that the oil in the pilchards is very readily oxidised and careful handling, chilling, freezing and storage procedures need to be adopted to provide a product which is a nutritionally sound feed material for captive tuna. The demerit point scoring system was found to be a rapid evaluative...

  4. Piston rod seal for a Stirling engine

    Science.gov (United States)

    Shapiro, Wilbur

    1984-01-01

    In a piston rod seal for a Stirling engine, a hydrostatic bearing and differential pressure regulating valve are utilized to provide for a low pressure differential across a rubbing seal between the hydrogen and oil so as to reduce wear on the seal.

  5. 50 CFR 23.63 - What factors are considered in making a finding that an animal is bred in captivity?

    Science.gov (United States)

    2010-10-01

    ... finding that an animal is bred in captivity? 23.63 Section 23.63 Wildlife and Fisheries UNITED STATES FISH... controlled environment; and has general characteristics that may include artificial housing, waste removal... means an ensemble of captive wildlife used for reproduction. (c) Bred-in-captivity criteria. For a...

  6. Folded membrane dialyzer with mechanically sealed edges

    Energy Technology Data Exchange (ETDEWEB)

    Markley, F.W.

    A semipermeable membrane is folded in accordion fashion to form a stack of pleats and the edges are sealed so as to isolate the opposite surfaces of the membrane. The stack is contained within a case that provides ports for flow of blood in contact with one surface of the membrane through channels formed by the pleats and also provides ports for flow of a dialysate through channels formed by the pleats in contact with the other surface of the membrane. The serpentine side edges of the membrane are sealed by a solidified plastic material, whereas effective mechanical means are provided to seal the end edges of the folded membrane. The mechanical means include a clamping strip which biases case sealing flanges into a sealed relationship with end portions of the membrane near the end edges, which portions extend from the stack and between the sealing flanges.

  7. 30 CFR 75.337 - Construction and repair of seals.

    Science.gov (United States)

    2010-07-01

    ... sealed areas. (b) Prior to sealing, the mine operator shall— (1) Remove insulated cables, batteries, and other potential electric ignition sources from the area to be sealed when constructing seals, unless it... after April 18, 2008, the seal at the lowest elevation shall have a corrosion-resistant, non-metallic...

  8. Note on breeding and parental care behaviours of albino Hoary-bellied Squirrel Callosciurus pygerythrus (Rodentia: Sciuridae in Sibsagar District of Assam, India

    Directory of Open Access Journals (Sweden)

    G. Kalita

    2009-06-01

    Full Text Available A few individuals of albino Horay-bellied Squirrels along with normal gray individuals of Callosciurus pygerythrus have been observed in Sibsagar district of Assam, India. One albino female was studied in captivity. This paper presents our observations on the breeding behaviour and the parental care exhibited by the albino squirrel in captivity. The squirrel bred twice in captivity with a normal male of the same species. In both the periods, a single male baby with normal coat colour developed. Oral dose of vitamin E has been found helpful in the breeding of the studied squirrel species. The mother squirrel exhibited parental care by carrying her baby using her mouth, to a safer place during danger. However, the observed phenomenon is unlike that of the cat species. Some of the habitat ecology and feeding habits of the albino squirrels have also been studied, both in natural and in captive conditions.

  9. Liquid-metal dip seal with pneumatic spring

    International Nuclear Information System (INIS)

    Poindexter, A.M.

    1977-01-01

    An improved liquid-metal dip seal for sealing the annulus between rotating plugs in the reactor vessel head of a liquid-metal fast-breeder nuclear reactor has two legs of differing widths communicating under a seal blade; the wide leg is also in communication with cover gas of the reactor and the narrow leg is also in communication with an isolated plug annulus above the seal. The annulus contains inert gas which acts as a pneumatic spring. Upon increasing cover gas pressure which depresses the level in the wide leg and greatly increases the level in the narrow leg, the pneumatic spring is compressed, and resists further level changes, thus preventing radioactive cover gas from bubbling through the seal

  10. Experimental toxoplasma gondii infection in grey seals (Halichoerus grypus)

    DEFF Research Database (Denmark)

    Gajadhar, A. A.; Measures, L.; Forbes, L. B.

    2004-01-01

    Laboratory-reared animals were used to assess the susceptibility of seals (Halichoerus grypus) to Toxoplasma gondii infection. Four seals were each orally inoculated with 100 or 10,000 oocysts of T. gondii (VEG strain), and another 4 seals served as negative controls. Occasionally, mild behavioral...... changes were observed in all inoculated seals but not in control animals. A modified agglutination test revealed the presence of antibodies to T. gondii in sera collected from inoculated seals and mice inoculated as controls. No evidence of the parasite was found on an extensive histological examination...... of seal tissues, and immunohistochemical staining of tissue sections from inoculated seals revealed a single tissue cyst in only 1 seal. Control mice inoculated with 10 oocysts from the same inoculum given to seals became serologically and histologically positive for T. gondii. Cats that were fed brain...

  11. Low torque hydrodynamic lip geometry for rotary seals

    Science.gov (United States)

    Dietle, Lannie L.; Schroeder, John E.

    2015-07-21

    A hydrodynamically lubricating geometry for the generally circular dynamic sealing lip of rotary seals that are employed to partition a lubricant from an environment. The dynamic sealing lip is provided for establishing compressed sealing engagement with a relatively rotatable surface, and for wedging a film of lubricating fluid into the interface between the dynamic sealing lip and the relatively rotatable surface in response to relative rotation that may occur in the clockwise or the counter-clockwise direction. A wave form incorporating an elongated dimple provides the gradual convergence, efficient impingement angle, and gradual interfacial contact pressure rise that are conducive to efficient hydrodynamic wedging. Skewed elevated contact pressure zones produced by compression edge effects provide for controlled lubricant movement within the dynamic sealing interface between the seal and the relatively rotatable surface, producing enhanced lubrication and low running torque.

  12. Turbine and Structural Seals Team Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — Seals Team Facilities conceive, develop, and test advanced turbine seal concepts to increase efficiency and durability of turbine engines. Current projects include...

  13. Tamper-indicating devices and safeguards seals evaluation test report

    International Nuclear Information System (INIS)

    Horton, P.R.V.; Waddoups, I.G.

    1993-12-01

    Sandia National Laboratories was asked to evaluate the seals used as tamper-indicating devices (TIDs) at DOE facilities. Initially, a survey determined what seal manufacturers were being used and what similar seal types were available. Once the required specifications for TIDs were defined, a test plan measured the currently available seals against the requirements. Environmental and physical type tests stressed the seals under two broad categories: (1) handling durability and (2) tamper resistance. Results of the testing provide comparative ratings for the various seals, recommendations for using currently available seals, and a new tamper-indicating technology

  14. Genetic variability in captive populations of the stingless bee Tetragonisca angustula.

    Science.gov (United States)

    Santiago, Leandro R; Francisco, Flávio O; Jaffé, Rodolfo; Arias, Maria C

    2016-08-01

    Low genetic variability has normally been considered a consequence of animal husbandry and a major contributing factor to declining bee populations. Here, we performed a molecular analysis of captive and wild populations of the stingless bee Tetragonisca angustula, one of the most commonly kept species across South America. Microsatellite analyses showed similar genetic variability between wild and captive populations However, captive populations showed lower mitochondrial genetic variability. Male-mediated gene flow, transport and division of nests are suggested as the most probable explanations for the observed patterns of genetic structure. We conclude that increasing the number of colonies kept through nest divisions does not negatively affect nuclear genetic variability, which seems to be maintained by small-scale male dispersal and human-mediated nest transport. However, the transport of nests from distant localities should be practiced with caution given the high genetic differentiation observed between samples from western and eastern areas. The high genetic structure verified is the result of a long-term evolutionary process, and bees from distant localities may represent unique evolutionary lineages.

  15. Design and research of seal structure for thermocouple column assembly

    International Nuclear Information System (INIS)

    Rao Qiqi; Li Na; Zhao Wei; Ma Zhigang

    2015-01-01

    The new seal structure was designed to satisfy the function of thermocouple column assembly and the reactor structure. This seal structure uses the packing graphite ring and adopts the self-sealing principle. Cone angle is brought to the seal face of seal structure which is conveniently to assembly and disassembly. After the sealing principle analysis and stress calculation of graphite ring which adopt the cone angle, the cone angle increases the radial force of seal structure and improves the seal effect. The stress analysis result shows the seal structure strength satisfies the regulation requirement. The cold and hot function test results shows the sealing effect is good, and the design requirement is satisfied. (authors)

  16. Development of sealing plug for sweep gas line

    International Nuclear Information System (INIS)

    Kikuchi, Taiji; Yamada, Hirokazu; Saitoh, Takashi; Nakamichi, Masaru; Tsuchiya, Kunihiko; Kawamura, Hiroshi

    2004-03-01

    On the irradiation capsule for neutron irradiation test of the tritium breeder, the sealing plug is necessary to prevent a leak of tritium gas when the tritium breeder is picked up from the irradiation capsule after irradiation test. However, the general valve and plug cannot apply to sealing of the sweep gas line because of the following factors, the neutron irradiation effect, limited space in the irradiation capsule, high sealing efficiency, simple method and operation for control. Therefore, the sealing plug for sweep gas line has to be developed. This paper reports the development of the sealing plug for sweep gas line and the operating procedure of the sealing plug in the irradiation capsule. (author)

  17. Fish Culture data - Snake River sockeye salmon captive propagation

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gene rescue captive broodstock program was established for ESA-listed endangered Snake River sockeye salmon from Redfish Lake, Idaho. The program has consisted of...

  18. 2007 NASA Seal/Secondary Air System Workshop. Volume 1

    Science.gov (United States)

    Steinetz, Bruce M.; Hendricks, Robert C.; Delgado, Irebert

    2008-01-01

    The 2007 NASA Seal/Secondary Air System workshop covered the following topics: (i) Overview of NASA's new Orion project aimed at developing a new spacecraft that will fare astronauts to the International Space Station, the Moon, Mars, and beyond; (ii) Overview of NASA's fundamental aeronautics technology project; (iii) Overview of NASA Glenn s seal project aimed at developing advanced seals for NASA's turbomachinery, space, and reentry vehicle needs; (iv) Reviews of NASA prime contractor, vendor, and university advanced sealing concepts, test results, experimental facilities, and numerical predictions; and (v) Reviews of material development programs relevant to advanced seals development. Turbine engine studies have shown that reducing seal leakage as well as high-pressure turbine (HPT) blade tip clearances will reduce fuel burn, lower emissions, retain exhaust gas temperature margin, and increase range. Turbine seal development topics covered include a method for fast-acting HPT blade tip clearance control, noncontacting low-leakage seals, intershaft seals, and a review of engine seal performance requirements for current and future Army engine platforms.

  19. Comparison of correlation algorithms for identifying ultrasonic seals

    International Nuclear Information System (INIS)

    Beer, C.L.; McKenzie, J.M.

    1991-01-01

    Ultrasonic seals are used on reactor fuel assemblies for international safeguards applications. The seals are read by a Seal Pattern Reader to obtain a discrete digital signature that is unique to each seal. The signature is used to determine the identity and integrity of the seals such that accountability and integrity of the nuclear fuel assemblies can be addressed. A correlation coefficient is calculated between the signature obtained at the time of inspection and a stored reference signature, yielding a number between negative one and one. Numbers close to one indicate a high probability that the two signatures represent the same seal. Data from two seals were studied, the Atomic Energy of Canada Limited Random Coil (ARC) seal and the JRC-Ispra VAK-III seal. Currently, correlation coefficients are obtained using data in the time or spatial domain, respectively. An approach is proposed in which the correlation coefficients are obtained from the Fourier transforms of the data. This paper reports that the objective of the study was to perform independent experiments on available ARC and VAK-III data to determine the advantages, if any, of transforming the data to the frequency spectrum prior to performing the correlation calculation. The results indicate definite advantages can be obtained

  20. Effect of sealing on the morphology of anodized aluminum oxide

    International Nuclear Information System (INIS)

    Hu, Naiping; Dong, Xuecheng; He, Xueying; Browning, James F.; Schaefer, Dale W.

    2015-01-01

    Highlights: • We explored structural change of anodizing aluminum oxide induced by sealing. • All sealing methods decrease pore size as shown by X-ray/neutron scattering. • Cold sealing and hot water sealing do not alter the aluminum oxide framework. • Hot nickel acetate sealing both fills the pores and deposits on air oxide interface. • Samples with hot nickel acetate sealing outperform other sealing methods. - Abstract: Ultra-small angle X-ray scattering (USAXS), small-angle neutron scattering (SANS), X-ray reflectometry (XRR) and neutron reflectometry (NR) were used to probe structure evolution induced by sealing of anodized aluminum. While cold nickel acetate sealing and hot-water sealing decrease pore size, these methods do not alter the cylindrical porous framework of the anodic aluminum oxide layer. Hot nickel acetate both fills the pores and deposits on the air surface (air–oxide interface), leading to low porosity and small mean pore radius (39 Å). Electrochemical impedance spectroscopy and direct current polarization show that samples sealed by hot nickel acetate outperform samples sealed by other sealing methods

  1. Immunological evaluation of captive green sea turtle (Chelonia mydas) with ulcerative dermatitis

    Science.gov (United States)

    Muñoz, Fernando Alberto; Estrada-Parra, Sergio; Romero-Rojas, Andrés; Gonzalez-Ballesteros, Erik; Work, Thierry M.; Villaseñor-Gaona, Hector; Estrada-Garcia, Iris

    2013-01-01

    Ulcerative dermatitis (UD) is common in captive sea turtles and manifests as skin erosions and ulcers associated with gram-negative bacteria. This study compared clinically healthy and UD-affected captive turtles by evaluating hematology, histopathology, immunoglobulin levels, and delayed-type hypersensitivity assay. Turtles with UD had significantly lower weight, reduced delayed-type hypersensitivity (DTH) responses, and higher heterophil:lymphocyte ratios. This study is the first to assay DTH in green turtles (Chelonia mydas) and suggests that UD is associated with immunosuppression.

  2. Ergonomics and safety of manual bag sealing.

    NARCIS (Netherlands)

    Groot, M.D. de; Bosch, T.; Eikhout, S.M.; Vink, P.

    2005-01-01

    A variety of seals is used to close bags. Each seal has advantages and disadvantages. For shop assistants sealing bags could be a repetitive physically demanding action. Opening and closing the bags again can cause some discomfort or annoyance for consumers. Besides, it is an activity which can

  3. Is music enriching for group-housed captive chimpanzees (Pan troglodytes)?

    Science.gov (United States)

    Wallace, Emma K.; Altschul, Drew; Körfer, Karoline; Benti, Benjamin; Kaeser, Amanda; Lambeth, Susan; Waller, Bridget M.; Slocombe, Katie E.

    2017-01-01

    Many facilities that house captive primates play music for animal enrichment or for caregiver enjoyment. However, the impact on primates is unknown as previous studies have been inconclusive. We conducted three studies with zoo-housed chimpanzees (Pan troglodytes) and one with group-housed chimpanzees at the National Centre for Chimpanzee Care to investigate the effects of classical and pop/rock music on various variables that may be indicative of increased welfare. Study one compared the behaviour and use of space of 18 animals when silence, classical or pop/rock music was played into one of several indoor areas. Overall, chimpanzees did not actively avoid the area when music was playing but were more likely to exit the area when songs with higher beats per minute were broadcast. Chimpanzees showed significantly fewer active social behaviours when music, rather than silence, was playing. They also tended to be more active and engage in less abnormal behaviour during the music but there was no change to either self-grooming or aggression between music and silent conditions. The genre of music had no differential effects on the chimpanzees’ use of space and behaviour. In the second study, continuous focal observations were carried out on three individuals with relatively high levels of abnormal behaviour. No differences in behaviour between music and silence periods were found in any of the individuals. The final two studies used devices that allowed chimpanzees to choose if they wanted to listen to music of various types or silence. Both studies showed that there were no persistent preferences for any type of music or silence. When taken together, our results do not suggest music is enriching for group-housed captive chimpanzees, but they also do not suggest that music has a negative effect on welfare. PMID:28355212

  4. Is music enriching for group-housed captive chimpanzees (Pan troglodytes?

    Directory of Open Access Journals (Sweden)

    Emma K Wallace

    Full Text Available Many facilities that house captive primates play music for animal enrichment or for caregiver enjoyment. However, the impact on primates is unknown as previous studies have been inconclusive. We conducted three studies with zoo-housed chimpanzees (Pan troglodytes and one with group-housed chimpanzees at the National Centre for Chimpanzee Care to investigate the effects of classical and pop/rock music on various variables that may be indicative of increased welfare. Study one compared the behaviour and use of space of 18 animals when silence, classical or pop/rock music was played into one of several indoor areas. Overall, chimpanzees did not actively avoid the area when music was playing but were more likely to exit the area when songs with higher beats per minute were broadcast. Chimpanzees showed significantly fewer active social behaviours when music, rather than silence, was playing. They also tended to be more active and engage in less abnormal behaviour during the music but there was no change to either self-grooming or aggression between music and silent conditions. The genre of music had no differential effects on the chimpanzees' use of space and behaviour. In the second study, continuous focal observations were carried out on three individuals with relatively high levels of abnormal behaviour. No differences in behaviour between music and silence periods were found in any of the individuals. The final two studies used devices that allowed chimpanzees to choose if they wanted to listen to music of various types or silence. Both studies showed that there were no persistent preferences for any type of music or silence. When taken together, our results do not suggest music is enriching for group-housed captive chimpanzees, but they also do not suggest that music has a negative effect on welfare.

  5. Is music enriching for group-housed captive chimpanzees (Pan troglodytes)?

    Science.gov (United States)

    Wallace, Emma K; Altschul, Drew; Körfer, Karoline; Benti, Benjamin; Kaeser, Amanda; Lambeth, Susan; Waller, Bridget M; Slocombe, Katie E

    2017-01-01

    Many facilities that house captive primates play music for animal enrichment or for caregiver enjoyment. However, the impact on primates is unknown as previous studies have been inconclusive. We conducted three studies with zoo-housed chimpanzees (Pan troglodytes) and one with group-housed chimpanzees at the National Centre for Chimpanzee Care to investigate the effects of classical and pop/rock music on various variables that may be indicative of increased welfare. Study one compared the behaviour and use of space of 18 animals when silence, classical or pop/rock music was played into one of several indoor areas. Overall, chimpanzees did not actively avoid the area when music was playing but were more likely to exit the area when songs with higher beats per minute were broadcast. Chimpanzees showed significantly fewer active social behaviours when music, rather than silence, was playing. They also tended to be more active and engage in less abnormal behaviour during the music but there was no change to either self-grooming or aggression between music and silent conditions. The genre of music had no differential effects on the chimpanzees' use of space and behaviour. In the second study, continuous focal observations were carried out on three individuals with relatively high levels of abnormal behaviour. No differences in behaviour between music and silence periods were found in any of the individuals. The final two studies used devices that allowed chimpanzees to choose if they wanted to listen to music of various types or silence. Both studies showed that there were no persistent preferences for any type of music or silence. When taken together, our results do not suggest music is enriching for group-housed captive chimpanzees, but they also do not suggest that music has a negative effect on welfare.

  6. Cannula has lip seal movingly coupled to proximal section, to facilitate relative movement of instrument shaft between seal and proximal section and to maintain sealing engagement between shaft and proximal portion

    OpenAIRE

    Bonadio, Frank; Vaugh, Trevor

    2007-01-01

    The cannula (1) has an instrument insertion section (3) and a tube (2) with an access channel (7) for extension of an instrument. A lip seal (4) movingly couples to a proximal section to engage with an instrument shaft (5). The seal facilitates a lateral movement of the instrument, and maintains the sealing engagement between the seal and the instrument shaft. A coupling portion made of gelatinous elastomeric material with plasticizer consisting of naturally derived oils, synthetic oils and l...

  7. Reproductive parameters of critically endangered European mink (Mustela lutreola) in captivity.

    Science.gov (United States)

    Kiik, Kairi; Maran, Tiit; Nemvalts, Kristel; Sandre, Siiri-Lii; Tammaru, Toomas

    2017-06-01

    Founding captive populations is often the last chance for saving endangered species from extinction. Ensuring successful reproduction is typically most critical for the maintenance of captive populations, with purposeful selection of individuals for breeding being one of the crucial aspects. Comparable cross-species data on the determinants of reproduction success are most useful for solving problems in captive species programs. In the present study, we provide an overview of a 20-year captive breeding program of the critically endangered European mink. The mating season starts in March, reaching its peak in the middle of April. The average gestation length was 43.8days (mode 43), the mean litter size being 4.4 (mode 4). Litter size and cub survival were negatively correlated with maternal age but this effect was entirely due to the lower performance of the females over 4 years of age. Female body weight also showed a positive correlation with litter size, with the weight itself having increased by 10% during the 20- year period. We did not find any signs of a cost of reproduction: the number of litters the female had delivered earlier in her life did not have an effect on her litter size in the focal year. Beyond the effect of age and size, individual females did not differ in litter sizes. Consistently, we found the heritability of litter size to be low. We conclude that, when selecting females for breeding, there is little need to consider aspects other than genetic relatedness crucial for avoiding progressive inbreeding. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Dampers for Stationary Labyrinth Seals

    Science.gov (United States)

    El-Aini, Yehia; Mitchell, William; Roberts, Lawrence; Montgomery, Stuart; Davis, Gary

    2011-01-01

    Vibration dampers have been invented that are incorporated as components within the stationary labyrinth seal assembly. These dampers are intended to supplement other vibration-suppressing features of labyrinth seals in order to reduce the incidence of high-cycle-fatigue failures, which have been known to occur in the severe vibratory environments of jet engines and turbopumps in which labyrinth seals are typically used. A vibration damper of this type includes several leaf springs and/or a number of metallic particles (shot) all held in an annular seal cavity by a retaining ring. The leaf springs are made of a spring steel alloy chosen, in conjunction with design parameters, to maintain sufficient preload to ensure effectiveness of damping at desired operating temperatures. The cavity is vented via a small radial gap between the retaining ring and seal housing. The damping mechanism is complex. In the case of leaf springs, the mechanism is mainly friction in the slippage between the seal housing and individual dampers. In the case of a damper that contains shot, the damping mechanism includes contributions from friction between individual particles, friction between particles and cavity walls, and dissipation of kinetic energy of impact. The basic concept of particle/shot vibration dampers has been published previously; what is new here is the use of such dampers to suppress traveling-wave vibrations in labyrinth seals. Damping effectiveness depends on many parameters, including, but not limited to, coefficient of friction, mode shape, and frequency and amplitude of vibrational modes. In tests, preloads of the order of 6 to 15 lb (2.72 to 6.8 kilograms) per spring damper were demonstrated to provide adequate damping levels. Effectiveness of shot damping of vibrations having amplitudes from 20 to 200 times normal terrestrial gravitational acceleration (196 to 1,960 meters per square second) and frequencies up to 12 kHz was demonstrated for shot sizes from 0.032 to

  9. Walking with lions: why there is no role for captive-origin lions Panthera leo in species restoration

    OpenAIRE

    Hunter, Luke T.B.; White, Paula; Henschel, Philipp; Frank, Laurence; Burton, Cole; Loveridge, Andrew; Balme, Guy; Breitenmoser, Christine; Breitenmoser, Urs

    2017-01-01

    Despite formidable challenges and few successes in reintroducing large cats from captivity to the wild, the release of captives has widespread support from the general public and local governments, and continues to occur ad hoc. Commercial so-called lion Panthera leo encounter operations in Africa exemplify the issue, in which the captive breeding of the lion is linked to claims of reintroduction and broader conservation outcomes. In this article we assess the capacity of such programmes to c...

  10. Oxidative stress, activity behaviour and body mass in captive parrots.

    Science.gov (United States)

    Larcombe, S D; Tregaskes, C A; Coffey, J; Stevenson, A E; Alexander, L G; Arnold, K E

    2015-01-01

    Many parrot species are kept in captivity for conservation, but often show poor reproduction, health and survival. These traits are known to be influenced by oxidative stress, the imbalance between the production of reactive oxygen species (ROS) and ability of antioxidant defences to ameliorate ROS damage. In humans, oxidative stress is linked with obesity, lack of exercise and poor nutrition, all of which are common in captive animals. Here, we tested whether small parrots (budgerigars, Melopsittacus undulatus) maintained in typical pet cages and on ad libitum food varied in oxidative profile, behaviour and body mass. Importantly, as with many birds held in captivity, they did not have enough space to engage in extensive free flight. Four types of oxidative damage, single-stranded DNA breaks (low-pH comet assay), alkali-labile sites in DNA (high-pH comet assay), sensitivity of DNA to ROS (H2O2-treated comet assay) and malondialdehyde (a byproduct of lipid peroxidation), were uncorrelated with each other and with plasma concentrations of dietary antioxidants. Without strenuous exercise over 28 days in a relatively small cage, more naturally 'active' individuals had more single-stranded DNA breaks than sedentary birds. High body mass at the start or end of the experiment, coupled with substantial mass gain, were all associated with raised sensitivity of DNA to ROS. Thus, high body mass in these captive birds was associated with oxidative damage. These birds were not lacking dietary antioxidants, because final body mass was positively related to plasma levels of retinol, zeaxanthin and α-tocopherol. Individuals varied widely in activity levels, feeding behaviour, mass gain and oxidative profile despite standardized living conditions. DNA damage is often associated with poor immunocompetence, low fertility and faster ageing. Thus, we have candidate mechanisms for the limited lifespan and fecundity common to many birds kept for conservation purposes.

  11. Captive solvent methods for fast, simple carbon-11 radioalkylations

    International Nuclear Information System (INIS)

    Jewett, D.M.; Mangner, T.J.; Watkins, G.L.

    1991-01-01

    Carbon-11 labeled radiopharmaceuticals for receptor studies usually require final purification by high performance liquid chromatography (HPLC). A significant simplification of the apparatus is possible if the radiolabeling reaction can be done directly in the HPLC injection circuit. Captive solvent methods in which the reaction is done in a small volume of solvent absorbed in a porous solid matrix are a general approach to this problem. For N-methylations with [ 11 C] methyl iodide, a basic catalyst may be incorporated in the polymeric or alumina solid phase. Reaction volumes are from 20 to 100 ML. Often no heating or cooling of the reaction column is necessary. The syntheses of [ 11 C]PK11195 and [ 11 C] flumazenil are described to illustrate some of the advantages and limitations of captive solvent methods

  12. Ductile alloys for sealing modular component interfaces

    Science.gov (United States)

    Marra, John J.; Wessell, Brian J.; James, Allister W.; Marsh, Jan H.; Gear, Paul J.

    2017-08-08

    A vane assembly (10) having: an airfoil (12) and a shroud (14) held together without metallurgical bonding there between; a channel (22) disposed circumferentially about the airfoil (12), between the airfoil (12) and the shroud (14); and a seal (20) disposed in the channel (22), wherein during operation of a turbine engine having the vane assembly (10) the seal (20) has a sufficient ductility such that a force generated on the seal (20) resulting from relative movement of the airfoil (12) and the shroud (14) is sufficient to plastically deform the seal (20).

  13. Ceramic-glass-metal seal by microwave heating

    Science.gov (United States)

    Meek, Thomas T.; Blake, Rodger D.

    1985-01-01

    A method for producing a ceramic-glass-metal seal by microwaving mixes a slurry of glass sealing material and coupling agent and applies same to ceramic and metal workpieces. The slurry and workpieces are then insulated and microwaved at a power, time and frequency sufficient to cause a liquid phase reaction in the slurry. The reaction of the glass sealing material forms a chemically different seal than that which would be formed by conventional heating because it is formed by diffusion rather than by wetting of the reactants.

  14. Bingham Sealing and Application in Vacuum Clamping

    Science.gov (United States)

    Yao, S. M.; Teo, Wee Kin; Geng, Zunmin; Turner, Sam; Ridgway, Keith

    2011-12-01

    Vacuum clamping is extensively used in shell machining. In this paper a Bingham Sealing (BS) is presented and formulized based on Bingham plastic performance. The sealing capability of BS is evaluated in various cases. A new Bingham plastic is developed and the yield stress is measured. The performances of "O"ring sealing and BS with the developed Bingham plastic are compared to the static experiment. In this experiment the same vacuum is achieved and the distortion of the blade with BS is better than that with "O" ring sealing.

  15. Bingham Sealing and Application in Vacuum Clamping

    International Nuclear Information System (INIS)

    Yao, S M; Teo, Wee Kin; Geng Zunmin; Turner, Sam; Ridgway, Keith

    2011-01-01

    Vacuum clamping is extensively used in shell machining. In this paper a Bingham Sealing (BS) is presented and formulized based on Bingham plastic performance. The sealing capability of BS is evaluated in various cases. A new Bingham plastic is developed and the yield stress is measured. The performances of Or ing sealing and BS with the developed Bingham plastic are compared to the static experiment. In this experiment the same vacuum is achieved and the distortion of the blade with BS is better than that with 'O' ring sealing.

  16. Risk factors for development of foot lesions in captive flamingos (Phoenicopteridae)

    DEFF Research Database (Denmark)

    Nielsen, Adriana M.W.; Nielsen, Søren Saxmose; King, Catherine E.

    2012-01-01

    different types of foot lesions (hyperkeratosis, nodular lesions, papillomatous growths, and fissures) in captive flamingos. The study was based on photos of 445 pairs of flamingo foot soles. Data originating from 337 birds in 10 different zoos were included. The odds of birds having hyperkeratosis......Foot lesions are highly prevalent in captive flamingos (Phoenicopterus spp.); however, the etiology of these lesions remains mainly speculative. The objectives of this study were to identify climatic factors (latitude, temperature, and housing) and surface factors influencing the risk of four...... and substrate appear to affect the odds of developing different types of foot lesions....

  17. Tunnel sealing: concept and feasibility evidence

    International Nuclear Information System (INIS)

    Brenner, R.P.; Eppinger, G.; Mettler, K.

    1991-01-01

    This report discusses first the aim and purpose of tunnel seals as well as the requirements which should be satisfied. The basic seal concept is a zoned plug consisting of key zones and intermediate zones. The key zones act as barrier elements and will be placed into sections of competent and sound rock. The main function of the intermediate zones is that of a support and the requirements for sealing efficiency may be somewhat relaxed. Three sealing concepts have been devised for both the key zones and the intermediate zones. They differ in the materials used for the seal and in the placement method. For the key zones highly compacted bentonite is recommended, but also cement-based materials, such as standard concrete or prepact concrete are considered suitable. For the intermediate zones, the use of pumped concrete with subsequent grouting of the roof zone is favourable, but also a combination of concrete with a sand/gravel mixture or with properly compacted excavation material is feasible. The concepts introduced can all be realized by conventional tunnelling methods. Excavation by tunnel boring machine is most advantageous as it minimizes disturbance of the rock caused by the cavity-forming process. By employing simple material models, it can be shown that the depth of the excavation disturbed zone can be minimized if support of the tunnel is provided as early as possible after excavation. The cutting of a groove in the tunnel wall along the key zone can further contribute to reduce the depth of the excavation-disturbed zone. In order to ensure the quality of a seal, the quantities of the materials used can be checked and the work procedures to place the seal can be supervised. For the latter the experiences obtained from a large-scale test should be available. Finally, it is also shown that when considering safety analytical aspects, the proposed sealing concepts represent adequate solutions in spite of the probably increased permeability in the excavation

  18. HMSRP Hawaiian Monk Seal Crittercam video

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project investigates foraging behavior of Hawaiian monk seals by conducting telemetry studies. During these studies, live seals are instrumented with dive...

  19. Leak detection of KNI seals

    International Nuclear Information System (INIS)

    Baranyai, G.; Peter, A.; Windberg, P.

    1990-03-01

    In Unit 3 and 4 of the Paks Nuclear Power Plant, Hungary, KNI type seals are used as lead-throughs with conical nickel sealing rings. Their failure can be critical for the operation of the reactor. An Acoustical Leak Detection System (ALDS) was constructed and tested for the operational testing of the seals. Some individual papers are presented in this collection on the calibration and testing of the ALDS intended to be placed on the top of the reactor vessels. The papers include simulation measurements of Unit 3 of NPP, laboratory experiments, evaluation of measurements, and further development needs with the ALDS. (R.P.) 50 figs.; 19 tabs

  20. Unification of reactor elastomeric sealing based on material

    International Nuclear Information System (INIS)

    Sinha, N.K.; Raj, Baldev

    2012-01-01

    The unification of elastomeric sealing applications of Indian nuclear reactors based on a few qualified fluoroelastomer/perfluoroelastomer compounds and standardized approaches for finite element analysis (FEA) based design, manufacturing process and antifriction coatings is discussed. It is shown that the advance polymer architecture based Viton ® formulation developed for inflatable seals of 500 MWe Prototype Fast Breeder Reactor (PFBR) and its four basic variations can encompass other sealing applications of PFBR with minimum additional efforts on development and validation. Changing the blend ratio of Viton ® GBL 200S and 600S in inflatable seal formulation could extend its use to Pressurized Heavy Water Reactors (PHWRs). The higher operating temperature of Advanced Heavy Water Reactor (AHWR) seals expands the choice to perfluoroelastomers. FEA based on plane-strain/axisymmetric modeling (with Mooney–Rivlin as the basic constitutive model), seal manufacture by cold feed extrusion and injection molding as well as plasma Teflon-like coating belonging to two variations obtained from the development of inflatable seals provide the necessary standardization for unification. The gains in simplification of design, development and operation of seals along with the enhancements of safety and reliability are expected to be substantial.

  1. SEALS: an Innovative Pipeline Program Targeting Obstacles to Diversity in the Physician Workforce.

    Science.gov (United States)

    Fritz, Cassandra D L; Press, Valerie G; Nabers, Darrell; Levinson, Dana; Humphrey, Holly; Vela, Monica B

    2016-06-01

    Medical schools may find implementing pipeline programs for minority pre-medical students prohibitive due to a number of factors including the lack of well-described programs in the literature, the limited evidence for program development, and institutional financial barriers. Our goals were to (1) design a pipeline program based on educational theory; (2) deliver the program in a low cost, sustainable manner; and (3) evaluate intermediate outcomes of the program. SEALS is a 6-week program based on an asset bundles model designed to promote: (1) socialization and professionalism, (2) education in science learning tools, (3) acquisition of finance literacy, (4) the leveraging of mentorship and networks, and (5) social expectations and resilience, among minority pre-medical students. This is a prospective mixed methods study. Students completed survey instruments pre-program, post-program, and 6 months post-program, establishing intermediate outcome measures. Thirteen students matriculated to SEALS. The SEALS cohort rated themselves as improved or significantly improved when asked to rate their familiarity with MCAT components (p diverse workforce that may ultimately begin to address and reduce health care disparities.

  2. Machine Vision Inspection of Polymeric Traypack Seal Areas

    National Research Council Canada - National Science Library

    Coburn, John

    2002-01-01

    .... Since entrapped matter can lead to open seals, defects, and seal anomalies, a method of measurement for seal area contamination is useful in quantifying effects of filler changes, line speeds, and product formulations...

  3. Stress assessment in captive greylag geese (Anser anser)

    NARCIS (Netherlands)

    Scheiber, Isabella; Sterenborg, Marlijn; Komdeur, Jan

    2015-01-01

    Chronic stress—or, more appropriately, “allostatic overload”—may be physiologically harmful and can cause death in the most severe cases. Animals in captivity are thought to be particularly vulnerable to allostatic overload due to artificial housing and group makeup. Here we attempted to determine

  4. Place Atrium to Water Seal (PAWS): Assessing Wall Suction Versus No Suction for Chest Tubes After Open Heart Surgery.

    Science.gov (United States)

    Kruse, Tamara; Wahl, Sharon; Guthrie, Patricia Finch; Sendelbach, Sue

    2017-08-01

    Traditionally chest tubes are set to -20 cm H 2 O wall suctioning until removal to facilitate drainage of blood, fluid, and air from the pleural or mediastinal space in patients after open heart surgery. However, no clear evidence supports using wall suction in these patients. Some studies in patients after pulmonary surgery indicate that using chest tubes with a water seal is safer, because this practice decreases duration of chest tube placement and eliminates air leaks. To show that changing chest tubes to a water seal after 12 hours of wall suction (intervention) is a safe alternative to using chest tubes with wall suction until removal of the tubes (usual care) in patients after open heart surgery. A before-and-after quality improvement design was used to evaluate the differences between the 2 chest tube management approaches in chest tube complications, output, and duration of placement. A total of 48 patients received the intervention; 52 received usual care. The 2 groups (intervention vs usual care) did not differ significantly in complications (0 vs 2 events; P = .23), chest tube output (H 1 = 0.001, P = .97), or duration of placement (median, 47 hours for both groups). Changing chest tubes from wall suction to water seal after 12 hours of wall suction is a safe alternative to using wall suctioning until removal of the tubes. ©2017 American Association of Critical-Care Nurses.

  5. Liver iron overloading in captive muriquis (Brachyteles spp.).

    Science.gov (United States)

    Santos, Stéfanie V; Strefezzi, Ricardo De F; Pissinatti, Alcides; Catão-Dias, José L

    2011-04-01

    Iron accumulation was investigated qualitatively and quantitatively in the liver of 15 captive Brachyteles spp. Hepatic hemosiderosis index (HHI) was determined as the area percentage of the liver parenchyma occupied by hemosiderin and ferritin deposits, through computerized histomorphometric analysis of Prussian blue-stained histologic sections. All studied animals presented liver hemosiderosis, and HHI ranged from 0.2% to 41.7%. There were no significant differences in HHI between muriqui species or genders, and no correlations were detected among HHI and age, time in captivity or body mass. Iron deposits were accompanied by other hepatic disorders. This is the first study addressing the occurrence and consequences of iron overloading in the liver of muriquis. We propose that hemosiderosis may act as a contribute factor for the development of hepatic injuries. Further studies are advised to clarify the role of diet in the pathogenesis of hemosiderosis in these atelids. © 2010 John Wiley & Sons A/S.

  6. Comparisons of genetic diversity in captive versus wild populations of the federally endangered Quino checkerspot butterfly (Euphydryas editha quino Behr; Lepidoptera: Nymphalidae)

    Science.gov (United States)

    Miller, Mark P.; Pratt, Gordon F.; Mullins, Thomas D.; Haig, Susan M.

    2014-01-01

    Captive populations can play a significant role in threatened and endangered species management. An important consideration when developing and managing captive populations, however, is the maintenance of genetic diversity to ensure that adequate variation exists to avoid the negative consequences of inbreeding. In this investigation, we compared genetic diversity patterns within captive and wild populations of the federally endangered Quino checkerspot butterfly (Euphydryas editha quino Behr [Lepidoptera: Nymphalidae]), a taxon with a restricted distribution to chaparral and sage shrublands within Riverside and San Diego counties, California. Our analyses revealed that medium to high-frequency alleles from the wild populations were also present in the captive populations. While there was no significant difference in genetic diversity as quantified by expected heterozygosity, the captive populations showed tendencies toward significantly lower allelic richness than their wild counterparts. Given that alleles from the wild populations were occasionally not detected in captive populations, periodic incorporation of new wild specimens into the captive population would help ensure that allelic diversity is maintained to the extent possible. If performed in advance, genetic surveys of wild populations may provide the clearest insights regarding the number of individuals needed in captivity to adequately reflect wild populations.

  7. Research on Captive Broodstock Programs for Pacific Salmon, 2004-2005 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry A. (National Marine Fisheries Service)

    2005-11-01

    The success of captive broodstock programs depends on high in-culture survival, appropriate development of the reproductive system, and the behavior and survival of cultured salmon after release, either as adults or juveniles. Continuing captive broodstock research designed to improve technology is being conducted to cover all major life history stages of Pacific salmon. Accomplishments detailed in this report and those since the last project review period (FY 2003) are listed below by major objective. Objective 1: (i) Developed tools for monitoring the spawning success of captively reared Chinook salmon that can now be used for evaluating the reintroduction success of ESA-listed captive broodstocks in their natal habitats. (ii) Developed an automated temperature controlled rearing system to test the effects of seawater rearing temperature on reproductive success of Chinook salmon. Objective 2: (i) Determined that Columbia River sockeye salmon imprint at multiple developmental stages and the length of exposure to home water is important for successful imprinting. These results can be utilized for developing successful reintroduction strategies to minimize straying by ESA-listed sockeye salmon. (ii) Developed behavioral and physiological assays for imprinting in sockeye salmon. Objective 3: (i) Developed growth regime to reduce age-two male maturation in spring Chinook salmon, (ii) described reproductive cycle of returning hatchery Snake River spring Chinook salmon relative to captive broodstock, and (iii) found delays in egg development in captive broodstock prior to entry to fresh water. (iv) Determined that loss of Redfish Lake sockeye embryos prior to hatch is largely due to lack of egg fertilization rather than embryonic mortality. Objective 4 : (i) Demonstrated safety and efficacy limits against bacterial kidney disease (BKD) in fall Chinook of attenuated R. salmoninarum vaccine and commercial vaccine Renogen, (ii) improved prophylactic and therapeutic

  8. Comparison of serum hormone levels of captive and free-living maned wolves Chrysocyon brachyurus

    Directory of Open Access Journals (Sweden)

    O.B. Maia

    2008-02-01

    Full Text Available Serum hormone levels were compared between captive and free-living maned wolves and seasonal variations of sex hormones were studied. Blood samples were collected from 16 male and 26 female adult animals from Brazilian zoos, and from 30 male and 24 female free-living adults to determine serum progesterone and testosterone by radioimmunoassay. Serum testosterone concentrations varied (P 0.05. Sixteen captive males showed higher testosterone concentration during winter and spring compared with 30 free-living animals (P < 0.05. Progesterone concentration varied among seasons in 26 captive females (P < 0.05, being higher in autumn (15.3 ± 3.1 ng/mL than in summer (6.6 ± 1.5 ng/mL, winter (5.3 ± 3.1 ng/mL and spring (4.3 ± 0.7 ng/mL. Progesterone concentration of 24 free-living females varied between autumn (17.1 ± 6.0 ng/mL and winter (1.7 ± 0.3 ng/mL (P < 0.05, but we could not obtain data for spring or summer. No difference in progesterone levels was observed between captive and free-living females in autumn and winter.

  9. Grande Ronde Basin Chinook Salmon Captive Brood and Conventional Supplementation Programs, 2002 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Carmichael, Richard W. (Oregon Department of Fish and Wildlife, La Grande, OR)

    2003-07-01

    Endangered Species Permit Number 1011 (formerly Permit No. 973) authorizes ODFW to take listed spring chinook salmon juveniles from Catherine Creek (CC), Lostine River (LR) and Grande Ronde River (GR) for research and enhancement purposes. Modification 2 of this permit authorizes ODFW to take adults for spawning and the production and release of smolts for the Captive and Conventional broodstock programs. This report satisfies the requirement that an annual report be submitted. Herein we report on activities conducted and provide cursory data analyses for the Grande Ronde spring chinook salmon Captive and Conventional broodstock projects from 1 January-31 December 2002. The Grande Ronde Basin Spring Chinook Salmon Captive Broodstock Project is designed to rapidly increase numbers of salmon in stocks that are in imminent danger of extirpation. Parr are captured in Catherine Creek, upper Grande Ronde River and Lostine River and reared to adulthood in captivity. Upon maturation, they are spawned (within stocks) and their progeny reared to smoltification before being released into the natal stream of their parents. This program is co-managed by ODFW, National Marine Fisheries Service, the Nez Perce Tribe and Confederated Tribes of the Umatilla Indian Reservation.

  10. Effect of captivity on genetic variance for five traits in the large milkweed bug (Oncopeltus fasciatus).

    Science.gov (United States)

    Rodríguez-Clark, K M

    2004-07-01

    Understanding the changes in genetic variance which may occur as populations move from nature into captivity has been considered important when populations in captivity are used as models of wild ones. However, the inherent significance of these changes has not previously been appreciated in a conservation context: are the methods aimed at founding captive populations with gene diversity representative of natural populations likely also to capture representative quantitative genetic variation? Here, I investigate changes in heritability and a less traditional measure, evolvability, between nature and captivity for the large milkweed bug, Oncopeltus fasciatus, to address this question. Founders were collected from a 100-km transect across the north-eastern US, and five traits (wing colour, pronotum colour, wing length, early fecundity and later fecundity) were recorded for founders and for their offspring during two generations in captivity. Analyses reveal significant heritable variation for some life history and morphological traits in both environments, with comparable absolute levels of evolvability across all traits (0-30%). Randomization tests show that while changes in heritability and total phenotypic variance were highly variable, additive genetic variance and evolvability remained stable across the environmental transition in the three morphological traits (changing 1-2% or less), while they declined significantly in the two life-history traits (5-8%). Although it is unclear whether the declines were due to selection or gene-by-environment interactions (or both), such declines do not appear inevitable: captive populations with small numbers of founders may contain substantial amounts of the evolvability found in nature, at least for some traits.

  11. Reactor coolant pump shaft seal behavior during station blackout

    International Nuclear Information System (INIS)

    Kittmer, C.A.; Wensel, R.G.; Rhodes, D.B.; Metcalfe, R.; Cotnam, B.M.; Gentili, H.; Mings, W.J.

    1985-04-01

    A testing program designed to provide fundamental information pertaining to the behavior of reactor coolant pump (RCP) shaft seals during a postulated nuclear power plant station blackout has been completed. One seal assembly, utilizing both hydrodynamic and hydrostatic types of seals, was modeled and tested. Extrusion tests were conducted to determine if seal materials could withstand predicted temperatures and pressures. A taper-face seal model was tested for seal stability under conditions when leaking water flashes to steam across the seal face. Test information was then used as the basis for a station blackout analysis. Test results indicate a potential problem with an elastomer material used for O-rings by a pump vendor; that vendor is considering a change in material specification. Test results also indicate a need for further research on the generic issue of RCP seal integrity and its possible consideration for designation as an unresolved safety issue

  12. Low Impact of Avian Pox on Captive-Bred Houbara Bustard Breeding Performance.

    Science.gov (United States)

    Le Loc'h, Guillaume; Souley, Mam-Noury Amadou; Bertagnoli, Stéphane; Paul, Mathilde C

    2017-01-01

    Avian pox, a disease caused by avipoxviruses, is a major cause of decline of some endangered bird species. While its impact has been assessed in several species in the wild, effects of the disease in conservation breeding have never been studied. Houbara bustard species ( Chlamydotis undulata and Chlamydotis macqueenii ), whose populations declined in the last decades, have been captive bred for conservation purposes for more than 20 years. While mortality and morbidity induced by avipoxviruses can be controlled by appropriate management, the disease might still affect bird breeding performance and jeopardize the production objectives of conservation programs. Impacts of the disease was studied during two outbreaks in captive-bred juvenile Houbara bustards in Morocco in 2009-2010 and 2010-2011, by modeling the effect of the disease on individual breeding performance (male display and female egg production) of 2,797 birds during their first breeding season. Results showed that the impact of avian pox on the ability of birds to reproduce and on the count of displays or eggs is low and mainly non-significant. The absence of strong impact compared to what could be observed in other species in the wild may be explained by the controlled conditions provided by captivity, especially the close veterinary monitoring of each bird. Those results emphasize the importance of individual management to prevent major disease emergence and their effects in captive breeding of endangered species.

  13. Birth and mortality of maned wolves Chrysocyon brachyurus (Illiger, 1811 in captivity

    Directory of Open Access Journals (Sweden)

    O. B. MAIA

    Full Text Available The aims of this study were to verify the distribution of births of captive maned wolves Chrysocyon brachyurus and the causes of their deaths during the period from 1980 to 1998, based on the registry of births and deaths in the International Studbook for Maned Wolves. To determine birth distribution and average litter size, 361 parturitions were analyzed for the 1989-98 period. To analyze causes of mortality, the animals were divided into four groups: 1. pups born in captivity that died prior to one year of age; 2. animals born in captivity that died at more than one year of age; 3. animals captured in the wild that died at any age; and 4. all animals that died during the 1980-98 period. In group 1, the main causes of mortality were parental incompetence (67%, infectious diseases, (9% and digestive system disorders (5%. The average mortality rate for pups was 56%. Parental incompetence was responsible for 95% of pup deaths during the first week of life. In group 2, the main causes were euthanasia (18% and disorders of the genitourinary (10% and digestive systems (8%. Euthanasia was implemented due to senility, congenital disorders, degenerative diseases, and trauma. In group 3, the main causes were digestive system disorders (12%, infectious diseases (10%, and lesions or accidents (10%. The main causes of mortality of maned wolves in captivity (group 4 were parental incompetence (38%, infectious diseases (9%, and digestive system disorders (7%.

  14. Birth and mortality of maned wolves Chrysocyon brachyurus (Illiger, 1811 in captivity

    Directory of Open Access Journals (Sweden)

    MAIA O. B.

    2002-01-01

    Full Text Available The aims of this study were to verify the distribution of births of captive maned wolves Chrysocyon brachyurus and the causes of their deaths during the period from 1980 to 1998, based on the registry of births and deaths in the International Studbook for Maned Wolves. To determine birth distribution and average litter size, 361 parturitions were analyzed for the 1989-98 period. To analyze causes of mortality, the animals were divided into four groups: 1. pups born in captivity that died prior to one year of age; 2. animals born in captivity that died at more than one year of age; 3. animals captured in the wild that died at any age; and 4. all animals that died during the 1980-98 period. In group 1, the main causes of mortality were parental incompetence (67%, infectious diseases, (9% and digestive system disorders (5%. The average mortality rate for pups was 56%. Parental incompetence was responsible for 95% of pup deaths during the first week of life. In group 2, the main causes were euthanasia (18% and disorders of the genitourinary (10% and digestive systems (8%. Euthanasia was implemented due to senility, congenital disorders, degenerative diseases, and trauma. In group 3, the main causes were digestive system disorders (12%, infectious diseases (10%, and lesions or accidents (10%. The main causes of mortality of maned wolves in captivity (group 4 were parental incompetence (38%, infectious diseases (9%, and digestive system disorders (7%.

  15. Does the stress response predict the ability of wild birds to adjust to short-term captivity? A study of the rock pigeon (Columbia livia).

    Science.gov (United States)

    Angelier, Frédéric; Parenteau, Charline; Trouvé, Colette; Angelier, Nicole

    2016-12-01

    Although the transfer of wild animals to captivity is crucial for conservation purposes, this process is often challenging because some species or individuals do not adjust well to captive conditions. Chronic stress has been identified as a major concern for animals held on long-term captivity. Surprisingly, the first hours or days of captivity have been relatively overlooked. However, they are certainly very stressful, because individuals are being transferred to a totally novel and confined environment. To ensure the success of conservation programmes, it appears crucial to better understand the proximate causes of interspecific and interindividual variability in the sensitivity to these first hours of captivity. In that respect, the study of stress hormones is relevant, because the hormonal stress response may help to assess whether specific individuals or species adjust, or not, to such captive conditions ('the stress response-adjustment to captivity hypothesis'). We tested this hypothesis in rock pigeons by measuring their corticosterone stress response and their ability to adjust to short-term captivity (body mass loss and circulating corticosterone levels after a day of captivity). We showed that an increased corticosterone stress response is associated with a lower ability to adjust to short-term captivity (i.e. higher body mass loss and circulating corticosterone levels). Our study suggests, therefore, that a low physiological sensitivity to stress may be beneficial for adjusting to captivity. Future studies should now explore whether the stress response can be useful to predict the ability of individuals from different populations or species to not only adjust to short-term but also long-term captivity.

  16. Cask systems development program seal technology

    International Nuclear Information System (INIS)

    Madsen, M.M.; Humphreys, D.L.; Edwards, K.R.

    1991-01-01

    General design or test performance requirements for radioactive materials (RAM) packages are specified in Title 10 of the US Code of Federal Regulations Part 71 (10 CFR 71). Seals that provide the containment system interface between the packaging body and the closure must function in both high- and low-temperature environments under dynamic and static conditions. Experiments were performed to characterize the performance of several seal materials at low temperatures. Helium leak tests on face seals were used to compare the materials. Materials tested include butyl, neoprene, ethylene propylene, fluorosilicone, silicone, Eypel, Kalrez, Teflon, fluorocarbon, and Teflon/silicone composites. Results show that the seal materials tested, with the exception of silicone S613-60, are not leak tight (1 x 10 -7 std cm 3 /s) at manufacturer low-temperature ratings

  17. High pressure thimble/guide tube seal fitting with built-in low pressure seal especially suitable for facilitated and more efficient nuclear reactor refueling service

    International Nuclear Information System (INIS)

    Bhatt, P.N.; Blaushield, R.M.

    1991-01-01

    This patent describes a HP/LP seal arrangement for an elongated guide tube and an elongated thimble disposed therein. The guide tube and thimble extending outwardly from the core of a nuclear reactor to a seal table where the guide tube is welded to the seal table to provide a high pressure seal relative thereto. It comprises: a tubular seal fitting disposed in alignment with the guide tube with the thimble extending therethrough on the low pressure side of the seal table; first high pressure sealing means coupling one end of the fitting to an end of the guide tube to prevent leakage from within the guide tube; inwardly facing thread means disposed adjacent the other and outer end of the seal fitting; a nut having an opening through which the thimble extends and further having outwardly facing threading in mating engagement with the fitting thread means; the fitting having a seal seat spaced longitudinally inwardly from the thread means and facing the fitting outer end and further disposed annularly about the inner surface of the fitting; deformable ring seal means; second releasable high pressure sealing means coupling the thimble to the outer end portion of the guide tube

  18. Seal for an object containing nuclear fuel

    International Nuclear Information System (INIS)

    Scheuerpflug, W.; Nentwich, D.

    1977-01-01

    This seal which cannot be counterfeited, specially for sealing nuclear objects, e.g. fuel rods, not only makes any damage which has taken place obvious, but makes identification according to a key possible. For this purpose a minimum number of 'particles' or small bodies, which are identical but of different permeability, are fixed inside a short tube during 'loading' of the seal in a certain or an accidental sequence. The sequence of the spheres, which represents a key, can only be determined by special electromagnetic measuring equipment. On first opening the seal, this key sequence is irrevocably destroyed. (HP) [de

  19. Properties of Sealing Materials in Groundwater Wells

    DEFF Research Database (Denmark)

    Köser, Claus

    pellets as sealing material in groundwater wells. The way and the pattern, in which bentonite pellets are deposited, have been shown to have an effect on the swelling pressure of the bentonite seal. During the transport phase of pellets from the terrain to a given sedimentation depth, a sorting process......) into densities for clay/water systems has been developed. This method has successfully been used to evaluate e.g., macroporosity, homogenization of the bentonite seal during the hydration of water, hydraulic conductivity and the creation of channels in the bentonite seals. Based on the results obtained...

  20. Blood dynamics of mercury and selenium in northern elephant seals during the lactation period

    Energy Technology Data Exchange (ETDEWEB)

    Habran, Sarah, E-mail: S.Habran@ulg.ac.be [Laboratory for Oceanology - MARE Center B6c, University of Liege, 4000 Liege (Belgium); Debier, Cathy, E-mail: cathy.debier@uclouvain.be [Unite de Biochimie de la Nutrition, Institut des Sciences de la vie, Universite catholique de Louvain, Place Croix du Sud 2/8, 1348 Louvain-la-Neuve (Belgium); Crocker, Daniel E., E-mail: crocker@sonoma.edu [Department of Biology, Sonoma State University, Rohnert Park, CA 94928 (United States); Houser, Dorian S., E-mail: biomimetica@cox.net [BIOMIMETICA, Santee, CA 92071 (United States); Das, Krishna, E-mail: Krishna.Das@ulg.ac.be [Laboratory for Oceanology - MARE Center B6c, University of Liege, 4000 Liege (Belgium)

    2011-10-15

    The effects of reproduction and maternal investment (i.e., milk transfer) on trace element levels remain poorly understood in marine mammals. We examined the blood dynamics of mercury (Hg) and selenium (Se) during lactation in the northern elephant seal (Mirounga angustirostris), a top predator from the North Pacific Ocean. Total Hg and Se levels were measured in whole blood and milk of 10 mother-pup pairs on days 5 and 22 of lactation. Both Hg and Se were transferred to offspring through the milk. Results suggested that the maternal transfer of Se was prominent during lactation, whereas the Hg transfer was larger during gestation. The lactation period affected Hg and Se levels in the blood of elephant seal mothers and pups. Physiological processes and their relationship to body condition should be considered carefully when interpreting trace element levels in the framework of biomonitoring. - Graphical abstract: Display Omitted Highlights: > The lactation period affects Hg and Se blood levels in elephant seal mothers and pups. > The Hg maternal transfer to offspring is larger during gestation. > The Se maternal transfer to offspring is prominent during lactation via the milk. - Blood levels of total Hg and Se are modified during the 4-week lactating period in northern elephant seals.

  1. Blood dynamics of mercury and selenium in northern elephant seals during the lactation period

    International Nuclear Information System (INIS)

    Habran, Sarah; Debier, Cathy; Crocker, Daniel E.; Houser, Dorian S.; Das, Krishna

    2011-01-01

    The effects of reproduction and maternal investment (i.e., milk transfer) on trace element levels remain poorly understood in marine mammals. We examined the blood dynamics of mercury (Hg) and selenium (Se) during lactation in the northern elephant seal (Mirounga angustirostris), a top predator from the North Pacific Ocean. Total Hg and Se levels were measured in whole blood and milk of 10 mother-pup pairs on days 5 and 22 of lactation. Both Hg and Se were transferred to offspring through the milk. Results suggested that the maternal transfer of Se was prominent during lactation, whereas the Hg transfer was larger during gestation. The lactation period affected Hg and Se levels in the blood of elephant seal mothers and pups. Physiological processes and their relationship to body condition should be considered carefully when interpreting trace element levels in the framework of biomonitoring. - Graphical abstract: Display Omitted Highlights: → The lactation period affects Hg and Se blood levels in elephant seal mothers and pups. → The Hg maternal transfer to offspring is larger during gestation. → The Se maternal transfer to offspring is prominent during lactation via the milk. - Blood levels of total Hg and Se are modified during the 4-week lactating period in northern elephant seals.

  2. Sealing of ceramic SOFC-components with glass seals; Fuegen von keramischen Komponenten der Hochtemperatur-Brennstoffzellen mittels Glas- und Glaskeramikloten

    Energy Technology Data Exchange (ETDEWEB)

    Schillig, Cora

    2012-07-10

    The solid oxide fuel cell (SOFC) converts chemical energy of a fuel directly into electrical energy. However, for the implementation of SOFC-technology in competition to conventional power plants costs have to be reduced. The use of an alternative tubular cell design without closed end would allow reducing costs during cell manufacturing. However, this change in design makes a gastight sealing inside the generator near the gas inlet necessary. Different ceramic materials with varying coefficients of thermal expansion have to be sealed gastight and electrical insulating at temperatures between 850 C and 1000 C to prevent the gases from mixing and an electrical shortcut between the cells. This work comprises analysis of commercially available glass and glass-ceramic systems manufactured by Schott Electronic Packaging, Areva T and D and Ferro Corporation. Additionally new developed sealing glass and glass-ceramic systems were investigated and all systems were characterized fundamentally for the use as sealing material in SOFC generators. Therefore different test assemblies and series were conducted. Essential characteristics of a suitable sealing system are a thermal expansion coefficient between 9,5 and 12 . 10{sup -6}K{sup -1}, a viscosity in the range between 10{sup 4} to 10{sup 6} dPa{sup *}s and a wetting angle smaller than 90 during the sealing process. Also unwanted chemical side reactions between the sealing partners must be prevented, because a change in the phase composition or the creation of new phases in the sealing material could endanger the stability of the seal. Heat cycles, particularly those during generator operation, cause deterioration of the sealing material and subsequent reduction in its ability to prevent mixing of the gases. Sealant leaks can drastically impact efficiency of the generator. In order to ensure optimum operation low leak rates around 2,3 . 10{sup -4} mbar l/sec/cm{sup 2} must be maintained. Especially glass and glass

  3. Replacement of nickel sealing rings by expanded graphite sealing rings -upgrading of SG primary collector flange connection

    Energy Technology Data Exchange (ETDEWEB)

    Cikryt, F.; Bednarek, L.; Kusyn, L. [Vitkovice, Ostrava (Switzerland)

    1997-12-31

    One of the most loaded parts of a steam generator of VVER 440 MW type are the bolts and thread holes of the primary collector cover sealing set. The strength calculations and tensometric measurings performed during operation proved the high degree of a load on the bolts. The conditions of the stress limitation are not met in some cases according to the pertinent standards. The untightnesses at nickel rings occurred during putting the units of Jaslovske Bohunice and Dukovany nuclear power stations into operation. With regard to improve the reliability, the producer has taken measures to improve the quality of the rings and users have introduced more strict regulations for bolts tightening. Due to these measures the high reliability of the set has been obtained from point of view of the tightness, but substantial reduction of bolts and holes threads loading have not been obtained. Several years operation experience proved relatively low service of bolts, damage of thread holes and sealing grooves. As the degree of mechanical load is one of the vital parameters influencing the damage of sealing set, in 1996 we started with the works aimed at a possibility of nickel sealing rings replacement for a more modern type of sealing which assure the higher reliability and service life of the individual part of sealing set under the reduced load.

  4. Replacement of nickel sealing rings by expanded graphite sealing rings -upgrading of SG primary collector flange connection

    Energy Technology Data Exchange (ETDEWEB)

    Cikryt, F; Bednarek, L; Kusyn, L [Vitkovice, Ostrava (Switzerland)

    1998-12-31

    One of the most loaded parts of a steam generator of VVER 440 MW type are the bolts and thread holes of the primary collector cover sealing set. The strength calculations and tensometric measurings performed during operation proved the high degree of a load on the bolts. The conditions of the stress limitation are not met in some cases according to the pertinent standards. The untightnesses at nickel rings occurred during putting the units of Jaslovske Bohunice and Dukovany nuclear power stations into operation. With regard to improve the reliability, the producer has taken measures to improve the quality of the rings and users have introduced more strict regulations for bolts tightening. Due to these measures the high reliability of the set has been obtained from point of view of the tightness, but substantial reduction of bolts and holes threads loading have not been obtained. Several years operation experience proved relatively low service of bolts, damage of thread holes and sealing grooves. As the degree of mechanical load is one of the vital parameters influencing the damage of sealing set, in 1996 we started with the works aimed at a possibility of nickel sealing rings replacement for a more modern type of sealing which assure the higher reliability and service life of the individual part of sealing set under the reduced load.

  5. Application of radioisotope technique for investigation of pumps seals

    International Nuclear Information System (INIS)

    Antoszewski, B.; Zorawska, A.

    1988-01-01

    Radioisotope method of measuring the wear of rings of the face mechanical seals, bush in soft seals, and leakage in double mechanical seals is described. The examples are given. It is found that radioisotope technique can be used for investigation of the seals. (author)

  6. Design and Calibration of a Full Scale Active Magnetic Bearing Based Test Facility for Investigating Rotordynamic Properties of Turbomachinery Seals in Multiphase Flow

    DEFF Research Database (Denmark)

    Voigt, Andreas Jauernik; Mandrup-Poulsen, Christian; Nielsen, Kenny Krogh

    2016-01-01

    of the subsea installed rotating machinery. It is well known that careful design of turbomachinery seals, such as interstage and balance piston seals, is pivotal for the performance of pumps and compressors. Consequently, the ability to predict the complex interaction between fluid dynamics and rotordynamics...... University of Denmark and Lloyd's Register Consulting are currently establishing a purpose built state of the art multiphase seal test facility, which is divided into three modules. Module I consists of a full scale Active Magnetic Bearing (AMB) based rotor dynamic test bench. The internally designed custom...... AMBs are equipped with an embedded Hall sensor system enabling high precision non-contact seal force quantification. Module II is a fully automatised calibration facility for the Hall sensor based force quantification system. Module III consists of the test seal housing assembly. This paper provides...

  7. Legacy HMSRP Hawaiian Monk Seals Observers

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set documents observers that have collected monk seal data as part of the ongoing monk seal population assessment efforts by PSD personnel and cooperating...

  8. HMSRP Hawaiian Monk Seal Entanglement data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data set contains records of all entanglements of Hawaiian monk seals in marine debris. The data set comprises records of seals entangled by derelict fishing...

  9. Evaluating genetic traceability methods for captive-bred marine fish and their applications in fisheries management and wildlife forensics

    OpenAIRE

    Bylemans, Jonas; Maes, Gregory E.; Diopere, Eveline; Cariani, Alessia; Senn, Helen; Taylor, Martin I.; Helyar, Sarah; Bargelloni, Luca; Bonaldo, Alessio; Carvalho, Gary; Guarniero, Ilaria; Komen, Hans; Martinsohn, Jann Th; Eg Nielsen, Einar; Tinti, Fausto

    2016-01-01

    Growing demands for marine fish products is leading to increased pressure on already depleted wild populations and a rise in aquaculture production. Consequently, more captive-bred fish are released into the wild through accidental escape or deliberate releases. The increased mixing of captive-bred and wild fish may affect the ecological and/or genetic integrity of wild fish populations. Unambiguous identification tools for captive-bred fish will be highly valuable to manage risks (fisheries ...

  10. Salt brickwork as long-term sealing in salt formations

    International Nuclear Information System (INIS)

    Walter, F.; Yaramanci, U.

    1993-01-01

    Radioactive wastes can be disposed of in deep salt formations. Rock salt is a suitable geologic medium because of its unique characteristics. Open boreholes, shafts and drifts are created to provide physical access to the repository. Long-term seals must be emplaced in these potential pathways to prevent radioactive release into the biosphere. The sealing materials must be mechanically and, most important, geochemically stable within the host rock. Salt bricks made from compressed salt-powder are understood to be the first choice long-term sealing material. Seals built of salt bricks will be ductile. Large sealing systems are built by combining the individual bricks with mortar. Raw materials for mortar are fine-grained halite powder and ground saliferous clay. This provides for the good adhesive strength of the mortar to the bricks and the high shear-strength of the mortar itself. To test the interaction of rock salt with an emplaced long-term seal, experiments will be carried out in situ, in the Asse salt mine in Germany. Simple borehole sealing experiments will be performed in horizontal holes and a complicated drift sealing experiment is planned, to demonstrate the technology of sealing a standard size drift or shaft inside a disturbed rock mass. Especially, the mechanical stability of the sealing system has to be demonstrated

  11. Sealed source peer review plan

    International Nuclear Information System (INIS)

    Feldman, Alexander; Leonard, Lee; Burns, Ron

    2009-01-01

    Sealed sources are known quantities of radioactive materials that have been encapsulated in quantities that produce known radiation fields. Sealed sources have multiple uses ranging from instrument calibration sources to sources that produce radiation fields for experimental applications. The Off-Site Source Recovery (OSR) Project at Los Alamos National Laboratory (LANL), created in 1999, under the direction of the Waste Management Division of the U.S. Department of Energy (DOE) Albuquerque has been assigned the responsibility to recover and manage excess and unwanted radioactive sealed sources from the public and private sector. LANL intends to ship drums containing qualified sealed sources to the Waste Isolation Pilot Plant (WIPP) for disposal. Prior to shipping, these drums must be characterized with respect to radiological content and other parameters. The U. S. Environmental Protection Agency (EPA) requires that ten radionulcides be quantified and reported for every container of waste to be disposed in the WIPP. The methods traditionally approved by the EPA include non-destructive assay (NDA) in accordance with Appendix A of the Contact-Handled Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant (DOE, 2002) (CH WAC). However, because of the nature and pedigree of historical records for sealed sources and the technical infeasibility of performing NDA on these sources, LANL proposes to characterize the content of these waste drums using qualified existing radiological data in lieu of direct measurement. This plan describes the process and documentation requirements for the use of the peer review process to qualify existing data for sealed radiological sources in lieu of perfonning radioassay. The peer review process will be performed in accordance with criteria provided in 40 CFR (section) 194.22 which specifies the use of the NUREG 1297 guidelines. The plan defines the management approach, resources, schedule, and technical requirements

  12. Molybdenum sealing glass-ceramic composition

    International Nuclear Information System (INIS)

    Eagan, R.J.

    1976-01-01

    A glass-ceramic composition is described having low hydrogen and helium permeability properties, along with high fracture strength, and a thermal coefficient of expansion similar to that of molybdenum. The composition is adaptable for hermetically sealing to molybdenum at temperatures between 900 and about 950 0 C to form a hermetically sealed insulator body

  13. Assessment of Captive Management of Nile Crocodile, Crocodylus ...

    African Journals Online (AJOL)

    The number of crocodiles and the number of eggs were of the constraints faced in managing them in captivity. The constraints mentioned includes inadequate space (75%) and inadequate funds (62.5%). Others includes problems of water, fighting among the crocodiles, diseases and parasites. The main recommendation is ...

  14. Ascaridosis in captive reticulated python( Python reticulatus ) | Taiwo ...

    African Journals Online (AJOL)

    Two captive reticulated pythons, Python reticulatus, in the Zoological Gardens, University of Ibadan, Ibadan, Nigeria died and were submitted for necropsy at the Diagnostic Laboratory of the Department of Veterinary Pathology, University of Ibadan. Both pythons had been infected with Ascaridia galli for a long period of time ...

  15. Acoustic resonance spectroscopy intrinsic seals

    International Nuclear Information System (INIS)

    Olinger, C.T.; Burr, T.; Vnuk, D.R.

    1994-01-01

    We have begun to quantify the ability of acoustic resonance spectroscopy (ARS) to detect the removal and replacement of the lid of a simulated special nuclear materials drum. Conceptually, the acoustic spectrum of a container establishcs a baseline fingerprint, which we refer to as an intrinsic seal, for the container. Simply removing and replacing the lid changes some of the resonant frequencies because it is impossible to exactly duplicate all of the stress patterns between the lid and container. Preliminary qualitative results suggested that the ARS intrinsic seal could discriminate between cases where a lid has or has not been removed. The present work is directed at quantifying the utility of the ARS intrinsic seal technique, including the technique's sensitivity to ''nuisance'' effects, such as temperature swings, movement of the container, and placement of the transducers. These early quantitative tests support the potential of the ARS intrinsic seal application, but also reveal a possible sensitivity to nuisance effects that could limit environments or conditions under which the technique is effective

  16. Pillow seal system at the BigRIPS separator

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, K., E-mail: ktanaka@riken.jp; Inabe, N.; Yoshida, K.; Kusaka, K.; Kubo, T.

    2013-12-15

    Highlights: • Pillow seal system has been installed for a high-intensity RI-beam facility at RIKEN. • It is aimed at facilitating remote maintenance under high residual radiation. • Local radiation shields are integrated with one of the pillow seals. • Pillow seals have been aligned to the beam axis within 1mm accuracy. • A leakage rate of 10{sup –9} Pa m{sup 3}/s has been achieved with our pillow seal system. -- Abstract: We have designed and installed a pillow seal system for the BigRIPS fragment separator at the RIKEN Radioactive Isotope Beam Factory (RIBF) to facilitate remote maintenance in a radioactive environment. The pillow seal system is a device to connect a vacuum chamber and a beam tube. It allows quick attachment and detachment of vacuum connections in the BigRIPS separator and consists of a double diaphragm with a differential pumping system. The leakage rate achieved with this system is as low as 10{sup –9} Pa m{sup 3}/s. We have also designed and installed a local radiation-shielding system, integrated with the pillow seal system, to protect the superconducting magnets and to reduce the heat load on the cryogenic system. We present an overview of the pillow seal and the local shielding systems.

  17. Plastic profiled sealing element for household refrigeration appliances

    Energy Technology Data Exchange (ETDEWEB)

    Wunderlich, E; Robl, G

    1988-12-28

    A plastic profiled sealing element for household refrigeration appliances, such as freezers, refrigerators, and freezer compartments, includes a sealing bellows having a hose-shaped cross section. The sealing bellows is provided with two side walls and a covering wall, and is made of a plastic that has been set by means of a softener so as to be continuously flexible. Further, the profiled sealing element is provided with an anchor member made of a plastic of the same or different material hardness, with the sealing bellows and the anchor member being connected with one another to form a unit. The cross sections of the two side walls of the sealing bellows narrow as the side walls rise from the region of the connection of the side walls with the covering wall of the anchor member to approximately half the height of the sealing bellows, so that the side walls become increasingly thinner. Thereafter, the cross sections of the side walls increase again to the edges of the covering wall of the sealing bellows, until the side walls again reach approximately their initial cross sections. The side walls, on the one hand, and the covering wall, on the other hand, are kept flexible by means of softeners having different characteristics.

  18. Dynamics of face seals for high speed turbomachinery

    Science.gov (United States)

    Leefe, Simon

    1993-10-01

    Face seals in rocket engine fuel and oxidizer turbopumps have been the subject of intense investigation for over 25 years. While advances have been made in the understanding of thin film lubrication between seal faces, valuable data has been produced on the friction and wear of material pairs in cryogenic environments; pioneering work has been done on the effect of lubricant phase change in seals, and many improvements have been made in mechanical seal design. Relatively superficial attention has been given to the vibrational dynamics of face seals in high-speed turbomachinery. BHR Group Ltd. (formerly BHRA) has recently completed the first stage of a study, commissioned by the European Space Agency, to investigate this area. This has involved the development of a two-dimensional adiabatic, turbulent lubrication model for thick gas film applications, the production of an integrated mathematical model of gas seal vibrational dynamics for thin film applications, implementation in software, the undertaking of an experimental program to validate software against variations in operating conditions and design variables, and suggestions for improved seal design.

  19. HMSRP Hawaiian Monk Seal Handling Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records for all handling and measurement of Hawaiian monk seals since 1981. Live seals are handled and measured during a variety of events...

  20. PTSD of rape after IS ("Islamic State") captivity.

    Science.gov (United States)

    Kizilhan, Jan Ilhan

    2018-03-10

    Research into the psychological consequences of rape on women in war and warlike situations is limited. The aims of this study were (a) to describe the prevalence and the nature of PTSD symptoms among Yazidi women reporting rape during IS captivity, (b) to describe comorbidity of other psychological disorders, and (c) to examine the risk factors associated with posttraumatic stress disorder.The study included 296 Yazidi women survivors of rape and has been conducted in Germany since January 2016 as part of a special-quota project in the German region of Baden-Wuerttemberg, designed to support the women and children who have escaped after being held hostage by IS.The survivors were recruited into a retrospective, cross-sectional study. Interviews in Germany were done through trained personnel to evaluate the mental health status of raped women.All the investigated women had been raped many times during IS captivity. About 82% of the women were also physically tortured. Of the sample, 67% suffered from somatoform disorder, 53% suffered from depression, 39% from anxiety, and 28% from dissociation. The prevalence of PTSD in those with rape events of more than 20 times was 57% (95% CI = 35.1-65.9%), less than 20 times was 41% (95%, CI = 28.7-4.8% and less than 10 times 39% [95% CI = 28.2-41.8%], respectively.The IS captivity and wartime rapes had deep immediate and long-term consequences on the mental health of women survivors. The high prevalence of PTSD emphasizes the need for culturally sensitive diagnostic and therapeutic services to address the intermediate and long-term consequences of wartime rape.

  1. Nutrition of the captive western lowland gorilla (Gorilla gorilla gorilla): a dietary survey.

    Science.gov (United States)

    Smith, B K; Remis, M J; Dierenfeld, E S

    2014-01-01

    The successful management of captive animals requires attention to multiple interconnected factors. One critical aspect of the daily life of a captive animal is the recommended and/or provisioned diet. This study focuses on the diets of zoo-housed gorillas. A national survey of diets among zoo-housed gorillas was conducted to examine diets being offered to captive gorillas in the United States and Canada. This survey serves as a follow-up to a 1995 dietary survey of zoo-housed gorillas and goes further to quantify nutritional profiles at responding institutions. Results are encouraging, as zoos have made clear improvements in dietary nutrient profiles offered over the past 15 years. However, we suggest that zoological and sanctuary institutions follow Gorilla Species Survival Plan (SSP) recommendations and work to continuously improve diets provided, which could improve gorillas' health and well-being. © 2014 Wiley Periodicals, Inc.

  2. Calving pattern on captive sambar deer (Cervus unicolor in East Kalimantan

    Directory of Open Access Journals (Sweden)

    ANDI TRASODIHARTO

    2005-01-01

    Full Text Available Sambar deer (Cervus unicolor is the biggest of tropical deer with its distribution in Indonesia limited to Kalimantan and Sumatera islands and neighboring islands near Sumatera. Several countries such as Malaysia and Thailand have been developing their tropical deer farming, whereas in Indonesia they are still in its infancy, as captive breeding. The knowledge on the biology of reproduction from tropical deer is still limited, particularly those under their natural habitat. An evaluation on the reproduction profiles of captive sambar deer were conducted by analyzing log book of the captive breeding in East Kalimantan. The results indicated that conception rates was very low, only 48,8% (SD=16.24; n=10 years with peak calving time between June and July and mean calving date was on 4 July (SD=10.4 days; n=109 fawns. Calving interval was 388,2 days (SD=82.45; n=33 fawns, with natural nursing lasted for 148 days. Young hind gave birth for the first time at the age of 693.8 days (SD=89.40; n=4 hinds, giving a time estimate of first mating at the age of 453 days.

  3. Feline panleukopaenia virus in captive non-domestic felids in South Africa

    Directory of Open Access Journals (Sweden)

    Emily P. Lane

    2016-06-01

    Full Text Available An outbreak of feline panleukopaenia virus (FPLV infection was diagnosed by pathology, electron microscopy and polymerase chain reaction (PCR in vaccinated captive-bred subadult cheetahs in South Africa. Subsequent to this disease outbreak, 12 cases of FPLV diagnosed on histology were confirmed by PCR in captive African black-footed cat, caracal, cheetah, lion, ocelot and serval. Phylogenetic analyses of the viral capsid protein gene on PCR-positive samples, vaccine and National Center for Biotechnology Information (NCBI reference strains identified a previously unknown strain of FPLV, present since at least 2006, that differs from both the inactivated and the modified live vaccine strains. A previously described South African strain from domestic cats and cheetahs was identified in a serval. Surveys of FPLV strains in South African felids are needed to determine the geographical and host species distribution of this virus. Since non-domestic species may be reservoirs of parvoviruses, and since these viruses readily change host specificity, the risks of FPLV transmission between captive-bred and free-ranging carnivores and domestic cats and dogs warrant further research. Keywords: feline panleukopaenia; parvovirus; felid; cheetah; vaccination

  4. Functional and proteomic comparison of Bothrops jararaca venom from captive specimens and the Brazilian Bothropic Reference Venom.

    Science.gov (United States)

    Farias, Iasmim Baptista de; Morais-Zani, Karen de; Serino-Silva, Caroline; Sant'Anna, Sávio S; Rocha, Marisa M T da; Grego, Kathleen F; Andrade-Silva, Débora; Serrano, Solange M T; Tanaka-Azevedo, Anita M

    2018-03-01

    Snake venom is a variable phenotypic trait, whose plasticity and evolution are critical for effective antivenom production. A significant reduction of the number of snake donations to Butantan Institute (São Paulo, Brazil) occurred in recent years, and this fact may impair the production of the Brazilian Bothropic Reference Venom (BBRV). Nevertheless, in the last decades a high number of Bothrops jararaca specimens have been raised in captivity in the Laboratory of Herpetology of Butantan Institute. Considering these facts, we compared the biochemical and biological profiles of B. jararaca venom from captive specimens and BBRV in order to understand the potential effects of snake captivity upon the venom composition. Electrophoretic analysis and proteomic profiling revealed few differences in venom protein bands and some differentially abundant toxins. Comparison of enzymatic activities showed minor differences between the two venoms. Similar cross-reactivity recognition pattern of both venoms by the antibothropic antivenom produced by Butantan Institute was observed. Lethality and neutralization of lethality for B. jararaca venom from captive specimens and BBRV showed similar values. Considering these results we suggest that the inclusion of B. jararaca venom from captive specimens in the composition of BBRV would not interfere with the quality of this reference venom. Snakebite envenomation is a neglected tropical pathology whose treatment is based on the use of specific antivenoms. Bothrops jararaca is responsible for the majority of snakebites in South and Southeastern Brazil. Its venom shows individual, sexual, and ontogenetic variability, however, the effect of animal captivity upon venom composition is unknown. Considering the reduced number of wild-caught snakes donated to Butantan Institute in the last decades, and the increased life expectancy of the snakes raised in captivity in the Laboratory of Herpetology, this work focused on the comparative

  5. A retrospective study of end-stage renal disease in captive polar bears (Ursus maritimus).

    Science.gov (United States)

    LaDouceur, Elise E B; Davis, Barbara; Tseng, Flo

    2014-03-01

    This retrospective study summarizes 11 cases of end-stage renal disease (ESRD) in captive polar bears (Ursus maritimus) from eight zoologic institutions across the United States and Canada. Ten bears were female, one was male, and the mean age at the time of death was 24 yr old. The most common clinical signs were lethargy, inappetence, and polyuria-polydipsia. Biochemical findings included azotemia, anemia, hyperphosphatemia, and isosthenuria. Histologic examination commonly showed glomerulonephropathies and interstitial fibrosis. Based on submissions to a private diagnostic institution over a 16-yr period, ESRD was the most commonly diagnosed cause of death or euthanasia in captive polar bears in the United States, with an estimated prevalence of over 20%. Further research is needed to discern the etiology of this apparently common disease of captive polar bears.

  6. 39 CFR 2.4 - Seal.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Seal. 2.4 Section 2.4 Postal Service UNITED STATES... Secretary of State, and is required by 39 U.S.C. 207 to be judicially noticed. The Seal shall be in the... description of the Postal Service emblem is described at 39 CFR 221.7. ...

  7. Magnetic shaft seals prevent hazardous leakage from wastewater agitators

    International Nuclear Information System (INIS)

    Traino, F.A.

    1985-01-01

    The US Department of Energy's laboratory in Miamisburg, OH, operated by Monsanto Research Corporation, processes approximately 45,000 gallons per week of low-level radioactive wastewater to meet Federal Environmental Protection Agency quality standards. Preventing the spread of radioactive contamination throughout the operating area demands effective sealing of all process piping, valves, pumps, and agitators. Rotating shafts of pumps and agitators installed a the start of operations in 1947 were sealed by stuffing glands with graphite impregnated asbestos packing. These pumps proved to be unsatisfactory. In the mid-1970's, new process pumps with mechanical seals and some with magnetic drives were installed. Later, in January 1979, new agitator shaft drives with double tandem, spring-loaded mechanical seals were installed, maintenance of these pumps was costly. The agitator drive shafts were redesigned to accommodate magnetic seals of the type successfully used in blowers and vacuum/pressure pumps in other plant locations. One inherent advantage of the magnetic seal is that it operates with a face loading as much as 50% less than a conventional spring-loaded mechanical seal. The lower loading by a predetermined uniform magnetic force contributes to long face life. Other advantages include compactness, ease of assembly with only a few parts, and insensitivity to vibration. The magnetic shaft seals installed on the agitator shafts in February 1983 are still in service without any leakage or need for maintenance. Based on current operating data and a projected five-year meantime between failures, the estimated cost benefit of the magnetic seals over spring-loaded mechanical seals over spring-loaded mechanical seals will be $640 vs $2400 respectively per seal, with 60% less downtime for maintenance

  8. Performances of Magnetic Fluid Seal and Application to Turbopumps

    OpenAIRE

    北洞, 貴也; 黒川, 淳一; 宮副, 雄貴; 林, 正悦

    1994-01-01

    A magnetic fluid shaft seal can achieve zero-leakage and operate stably against shaft vibration, but the sealing pressure is very low. In order to improve the pressure performance of a magnetic fluid seal and apply it to a turbopump, the seal pressure characteristics are studied theoretically and experimentally. The Poisson equation for magnetic vector potential is solved by FEM, and the seal performances are determined by use of the Bernoulli equation. The validity of the theory is confirmed...

  9. Knife-edge seal for vacuum bagging

    Science.gov (United States)

    Rauschl, J. A.

    1980-01-01

    Cam actuated clamps pinch bagging material between long knife edge (mounted to clamps) and high temperature rubber cushion bonded to baseplate. No adhesive, tape, or sealing groove is needed to seal edge of bagging sheet against base plate.

  10. Verification on reliability of diaphragm seal

    International Nuclear Information System (INIS)

    Ide, Hiroshi; Sakuta, Yoshiyuki; Hanawa, Yoshio; Tsuji, Tomoyuki; Tsuboi, Kazuaki; Nagao, Yoshiharu; Miyazawa, Masataka

    2009-06-01

    The main body of the JMTR is composed of reactor pressure vessel, core and reactor pool. At the bottom of the reactor pool, the Diaphragm-seal (2.6m outer diameter, 2m inner diameter, thickness 1.5mm) of the JMTR made of stainless steel is installed to prevent the water leak of the reactor pool and to absorb the expansion of the reactor pressure vessel due to pressure and temperature changes. In the long-term maintenance plans drawn up in 2004, it is required that the visual inspection for the diaphragm-seal should be carried out in 2007 and that the inspection should be carried out every around five-year. Therefore, prior to the refurbishment of the JMTR, the inspection device which is a deposition-collection apparatus with underwater-camera was developed, and the visual inspection was carried out to confirm the soundness of the diaphragm-seal. As a result, harmful flaws and/or corrosions were not inspected in the visual inspection, and the soundness of the diaphragm seal was confirmed. In future, the long-term integrity of the diaphragm-seal will could be achieved by conducting the periodic inspection. (author)

  11. Sealing of investigation boreholes, Phase 4 - Final report

    Energy Technology Data Exchange (ETDEWEB)

    Pusch, Roland [Drawrite AB, Luleaa Technical University, Luleaa (Sweden); Ramqvist, Gunnar [El-Tekno AB, Figeholm (Sweden); Bockgaard, Niclas [Golder Associates, Goeteborg (Sweden); Ekman, Lennart [LE Geokonsult AB, Baelinge (Sweden)

    2011-09-15

    The report describes the outcome of Phase 4 of the project 'Sealing of investigation boreholes', which deals with 1) characterization and planning of borehole sealing, 2) performance and quality assessment, 3) sealing of large diameter holes, and 4) interaction of clay and concrete plugs. A specific goal was to find ways to characterize, plan and seal of boreholes so that their impact on the overall hydraulic performance of the repository rock can predicted and controlled. The work comprised selection of representative 'reference holes' at the Laxemar and Forsmark sites for development of a general programme for planning and simulating implementation of borehole plugging campaigns, considering also cost issues. A second aim was to define and quantify the role of seals in the reference holes for finding out how important sealing really is. A third was to test a practical way to seal large diameter boreholes and a fourth to find out how concrete matures and performs in contact with smectite clay. The study demonstrated, in conclusion, the need for developing techniques for preparing deep boreholes before lasting seals are installed in them, since poor sealing can short-circuit hydraulically important fracture zones intersected by the holes. The practically oriented sealing activities showed that the technique developed for tight sealing of large-diameter boreholes is practical and feasible. The issue of chemical stability was investigated by testing the performance and constitution of a plug consisting of CBI concrete in contact with smectite-rich seals for almost three years. This study showed that none of them underwent substantial degradation in this period of time, but chemical reactions and thereby generated changes in physical behaviour of the plug components had taken place, particularly in the clay. The rate of degradation is, however, not yet known. It was concluded from this study that it is suitable to carry out a corresponding

  12. Sealing of investigation boreholes, Phase 4 - Final report

    International Nuclear Information System (INIS)

    Pusch, Roland; Ramqvist, Gunnar; Bockgaard, Niclas; Ekman, Lennart

    2011-09-01

    The report describes the outcome of Phase 4 of the project 'Sealing of investigation boreholes', which deals with 1) characterization and planning of borehole sealing, 2) performance and quality assessment, 3) sealing of large diameter holes, and 4) interaction of clay and concrete plugs. A specific goal was to find ways to characterize, plan and seal of boreholes so that their impact on the overall hydraulic performance of the repository rock can predicted and controlled. The work comprised selection of representative 'reference holes' at the Laxemar and Forsmark sites for development of a general programme for planning and simulating implementation of borehole plugging campaigns, considering also cost issues. A second aim was to define and quantify the role of seals in the reference holes for finding out how important sealing really is. A third was to test a practical way to seal large diameter boreholes and a fourth to find out how concrete matures and performs in contact with smectite clay. The study demonstrated, in conclusion, the need for developing techniques for preparing deep boreholes before lasting seals are installed in them, since poor sealing can short-circuit hydraulically important fracture zones intersected by the holes. The practically oriented sealing activities showed that the technique developed for tight sealing of large-diameter boreholes is practical and feasible. The issue of chemical stability was investigated by testing the performance and constitution of a plug consisting of CBI concrete in contact with smectite-rich seals for almost three years. This study showed that none of them underwent substantial degradation in this period of time, but chemical reactions and thereby generated changes in physical behaviour of the plug components had taken place, particularly in the clay. The rate of degradation is, however, not yet known. It was concluded from this study that it is suitable to carry out a corresponding investigation of the plugs

  13. Magnetic vector field tag and seal

    Science.gov (United States)

    Johnston, Roger G.; Garcia, Anthony R.

    2004-08-31

    One or more magnets are placed in a container (preferably on objects inside the container) and the magnetic field strength and vector direction are measured with a magnetometer from at least one location near the container to provide the container with a magnetic vector field tag and seal. The location(s) of the magnetometer relative to the container are also noted. If the position of any magnet inside the container changes, then the measured vector fields at the these locations also change, indicating that the tag has been removed, the seal has broken, and therefore that the container and objects inside may have been tampered with. A hollow wheel with magnets inside may also provide a similar magnetic vector field tag and seal. As the wheel turns, the magnets tumble randomly inside, removing the tag and breaking the seal.

  14. Radioactive material package seal tests

    International Nuclear Information System (INIS)

    Madsen, M.M.; Humphreys, D.L.; Edwards, K.R.

    1990-01-01

    General design or test performance requirements for radioactive materials (RAM) packages are specified in Title 10 of the US Code of Federal Regulations Part 71 (US Nuclear Regulatory Commission, 1983). The requirements for Type B packages provide a broad range of environments under which the system must contain the RAM without posing a threat to health or property. Seals that provide the containment system interface between the packaging body and the closure must function in both high- and low-temperature environments under dynamic and static conditions. A seal technology program, jointly funded by the US Department of Energy Office of Environmental Restoration and Waste Management (EM) and the Office of Civilian Radioactive Waste Management (OCRWM), was initiated at Sandia National Laboratories. Experiments were performed in this program to characterize the behavior of several static seal materials at low temperatures. Helium leak tests on face seals were used to compare the materials. Materials tested include butyl, neoprene, ethylene propylene, fluorosilicone, silicone, Eypel, Kalrez, Teflon, fluorocarbon, and Teflon/silicone composites. Because most elastomer O-ring applications are for hydraulic systems, manufacturer low-temperature ratings are based on methods that simulate this use. The seal materials tested in this program with a fixture similar to a RAM cask closure, with the exception of silicone S613-60, are not leak tight (1.0 x 10 -7 std cm 3 /s) at manufacturer low-temperature ratings. 8 refs., 3 figs., 1 tab

  15. Choanal and cloacal aerobic bacterial flora in captive green iguanas: a comparative analysis

    Directory of Open Access Journals (Sweden)

    Silvia Barazorda Romero

    2015-01-01

    Full Text Available The aims of this study were to characterize the choanal and cloacal aerobic bacterial flora in healthy captive green iguanas and to compare it with the bacterial flora of the biofilm present in the water container of each terrarium. Samples were collected from the choana and the cloaca of 20 healthy captive adult green iguanas and from the biofilm of 15 water containers. The final identification of aerobic bacteria was performed by matrix-assisted laser desorption ionization time-of-flight mass spectrometry. Salmonella positive samples were serotyped. The most common strains observed at each test location were from 1 choanae: Staphylococcus spp., Enterobacter cloacae and Comamonas testosteroni; 2 cloacae: Citrobacter spp., Salmonella spp. and Corynebacterium spp.; and 3 biofilms: Pseudomonas spp., Salmonella spp. and Acidovorax spp. We showed that apart from Salmonella spp., the choanal and cloacal bacterial flora differed from the microorganisms present in the biofilm of the animal’s water container. These data revealed that healthy captive adult green iguanas harbored several aerobic bacterial strains that in immunosuppressed reptiles may act as opportunistic pathogens. Also, several of the aerobic bacteria identified in samples are potential zoonotic agents. Characterization of the normal background flora in captive reptiles and their environment can contribute to an understanding of the spread of bacterial contamination and the risk of potential zoonotic diseases for people in contact with these animals.

  16. Cecal bacterial communities in wild Japanese rock ptarmigans and captive Svalbard rock ptarmigans.

    Science.gov (United States)

    Ushida, Kazunari; Segawa, Takahiro; Tsuchida, Sayaka; Murata, Koichi

    2016-02-01

    Preservation of indigenous gastrointestinal microbiota is deemed to be critical for successful captive breeding of endangered wild animals, yet its biology is poorly understood. Here, we investigated cecal bacterial communities in wild Japanese rock ptarmigans (Lagopus muta japonica) and compared them with those in Svalbard rock ptarmigans (L. m. hyperborea) in captivity. Ultra-deep sequencing of 16S rRNA gene indicated that the community structure of cecal microbiota in wild rock ptarmigans was remarkably different from that in captive Svalbard rock ptarmigans. Fundamental differences between bacterial communities in the two groups of birds were detected at the phylum level. Firmicutes, Actinobacteria, Bacteroidetes and Synergistetes were the major phyla detected in wild Japanese rock ptarmigans, whereas Firmicutes alone occupied more than 80% of abundance in captive Svalbard rock ptarmigans. Furthermore, unclassified genera of Coriobacteriaceae, Synergistaceae, Bacteroidaceae, Actinomycetaceae, Veillonellaceae and Clostridiales were the major taxa detected in wild individuals, whereas in zoo-reared birds, major genera were Ruminococcus, Blautia, Faecalibacterium and Akkermansia. Zoo-reared birds seemed to lack almost all rock ptarmigan-specific bacteria in their intestine, which may explain the relatively high rate of pathogenic infections affecting them. We show evidence that preservation and reconstitution of indigenous cecal microflora are critical for successful ex situ conservation and future re-introduction plan for the Japanese rock ptarmigan.

  17. Captive-rearing of Gunnison sage-grouse from egg collection to adulthood to foster proactive conservation and recovery of a conservation-reliant species.

    Science.gov (United States)

    Apa, Anthony D; Wiechman, Lief A

    2015-01-01

    Gunnison sage-grouse (Centrocercus minimus) are distributed across southwestern Colorado and southeastern Utah, United States. Their distribution has decreased over the past century and the species has been listed as threatened by the U.S. Fish and Wildlife Service. Reduced genetic diversity, small population size, and isolation may affect Gunnison sage-grouse population persistence. Population augmentation can be used to counteract or mitigate these issues, but traditional translocation efforts have yielded mixed, and mostly unsuccessful, results. Captive-rearing is a viable, although much debated, conservation approach to bolster wild conservation-reliant species. Although there have been captive-rearing efforts with greater sage-grouse (C. urophasianus), to date, no information exists about captive-rearing methods for Gunnison sage-grouse. Therefore, we investigated techniques for egg collection, artificial incubation, hatch, and captive-rearing of chicks, juveniles, subadults, and adults for Gunnison sage-grouse. In 2009 we established a captive flock that produced viable eggs. From 2009-2011, we collected and artificially incubated 206 Gunnison sage-grouse eggs from 23 wild and 14 captive females. Our hatchability was 90%. Wild-produced eggs were heavier than captive-produced eggs and lost mass similarly during incubation. We produced 148 chicks in captivity and fed them a variety of food sources (e.g. invertebrates to commercial chow). Bacterial infections were the primary cause of chick mortality, but we successfully reduced the overall mortality rate during the course of our study. Conservationists and managers should consider the utility in developing a captive-rearing program or creating a captive population as part of a proactive conservation effort for the conservation-reliant Gunnison sage-grouse. © 2015 Wiley Periodicals, Inc.

  18. Monthly morphometric data on captive loggerhead sea turtles 1995-present

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The database contains monthly measurements taken on captive reared sea turtles. Measurements include: straight carapace length nuchal notch to carapace tip, straight...

  19. 2005 NASA Seal/Secondary Air System Workshop, Volume 1

    Science.gov (United States)

    Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor)

    2006-01-01

    The 2005 NASA Seal/Secondary Air System workshop covered the following topics: (i) Overview of NASA s new Exploration Initiative program aimed at exploring the Moon, Mars, and beyond; (ii) Overview of the NASA-sponsored Propulsion 21 Project; (iii) Overview of NASA Glenn s seal project aimed at developing advanced seals for NASA s turbomachinery, space, and reentry vehicle needs; (iv) Reviews of NASA prime contractor, vendor, and university advanced sealing concepts including tip clearance control, test results, experimental facilities, and numerical predictions; and (v) Reviews of material development programs relevant to advanced seals development. Turbine engine studies have shown that reducing high-pressure turbine (HPT) blade tip clearances will reduce fuel burn, lower emissions, retain exhaust gas temperature margin, and increase range. Several organizations presented development efforts aimed at developing faster clearance control systems and associated technology to meet future engine needs. The workshop also covered several programs NASA is funding to develop technologies for the Exploration Initiative and advanced reusable space vehicle technologies. NASA plans on developing an advanced docking and berthing system that would permit any vehicle to dock to any on-orbit station or vehicle. Seal technical challenges (including space environments, temperature variation, and seal-on-seal operation) as well as plans to develop the necessary "androgynous" seal technologies were reviewed. Researchers also reviewed tests completed for the shuttle main landing gear door seals.

  20. Mechanical seal monitoring technique by acoustic emission measurements

    Energy Technology Data Exchange (ETDEWEB)

    Kataoka, Tadashi; Fujita, Yoshihiro; Kawaguchi, Kazunori; Saito, Kazuhiro; Yokota, Setsuo; Hisada, Yasuhide; Masahiro, Komatsu

    1987-09-20

    This report describes a technique for mechanical seal monitoring through acoustic emission (AE) measurement. The equipment consists of an AE sensor, preamplifier, multiplexer, main amplifier, effective value transducer and computer system. When the sealed liquid pressure undergoes a large change, the seal surface configuration is monitored and evaluated accurately through AE measurement. If the mechanical seal surface id damaged or worn, the AE level is kept high or continues to fluctuate largely for a rather long period. When leak occurs, the AE value shows great fluctuations either at extremely low levels or at high levels. The former trend is considered to result from a decrease in solid contact due to an excessive amount of liquid film being formed at the seal surface during leak. In the latter case, the leak is attributed to severe damage to the seal surface. (18 figs, 1 tab, 5 photos, 3 refs)

  1. The southern elephant seal Mirounga leonina at Gough Island

    African Journals Online (AJOL)

    haul-out in December coincided with the elephant seal moulting season, the elephant seals were found on the vegetated areas whilst the majority of fur seals hauled out onto the boulder beach. No interactions between the two species were recorded. Potential predators of elephant seals, i.e. the killer whales Orcinus orca ...

  2. Application of hydrophilic magnetic fluid to oil seal

    Science.gov (United States)

    Kim, Y. S.; Nakatsuka, K.; Fujita, T.; Atarashi, T.

    1999-07-01

    Bearing and gear are important components in machines. Lubricant for bearing or gear is usually confined in working space by rubber retainer or mechanical seal, and its lifetime which is determined by the friction wear of sealing material is important. In this report, the basic characteristics of magnetic fluid seal applied to lubricant retainer is studied. The fluid used for this purpose is ethyleneglycol-based magnetic fluid in which silica-coated iron particles are dispersed. The lubricant oil seal set consisting of six stages of pole piece and Nd-permanent magnets (4.0 Wb/m 2) in seal housing showed an excellent pressure resistance of 618 kPa under a rotating speed of 1800 rpm.

  3. (Reinsurance captives, efficiency and moral hazard. An attractive manner of risk financing and risk management for companies in certain circumstances

    Directory of Open Access Journals (Sweden)

    Wim Weterings

    2014-03-01

    Full Text Available In this study the contribution is intended to provide more clarity and to demonstrate that under certain circumstances an insurance captive can have important efficiency effects and, among other things, a positive effect on moral hazard and adverse selection. For the purpose of acquiring more information on insurance captives and their operation, literature research was augmented by interviews conducted with the director of an insurance captive of a Dutch multinational, as well as with representatives from AON and Marsh, two major insurance brokers/consultancy firms in risk management that are often involved in the establishment and management of a captive

  4. Windpower and grey seals: An impact assessment of potential effects by sea-based windpower plants in a local seal population

    International Nuclear Information System (INIS)

    Sundberg, Jan; Soederman, Malin

    2000-05-01

    The impact of five sea-based wind power plants on two haulout sites for grey seals on southwestern Gotland, in the Baltic Sea, was analysed. Data on seal numbers was collected on a regular basis during the initial stages of the project from summer 1996, continuing during the building (autumn 1997) and running of the wind power plants (from spring 1998) until the end of June 1999. Additional observational data from earlier years was also available. Indications of lower occurrence and reduced number of seals in the area was found during periods of time in 1997 and 1998, times of construction and active running of the plants. However, no evidence on the wind power plants, per se, affecting the grey seals was found. Instead, several weather factors were found to affect the number of seals in the area, and periods of low occurrence and number of seals were more likely explained by i.e. unfavourable water levels and hard wind from certain directions. One important, short term, impact factor was however found. Human induced disturbances such as boat and helicopter traffic, some which were directly related to maintenance of the wind power plants, temporarily reduced number of seals and made them more restless. Disturbance thus constitutes a potential threat to seals. A shift from one to the other of the two haulout sites was also noted, a shift which likely is due to disturbances. Future guidelines are given, including some restrictions in movements near the haulout sites. Continued observations and studies are suggested if more off-shore wind power plants will be raised in the area. A call for more stringent use of environmental impact assessments is thus made. Also, suggestions on measures to be taken in order to reduce the effect of human related disturbances are made. In order to create sustainable conditions for a continued population of seals in the area and in order to create opportunities for a reestablishment of the grey seal in the southern Baltic region

  5. Windpower and grey seals: An impact assessment of potential effects by sea-based windpower plants in a local seal population

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan; Soederman, Malin [Uppsala Univ. (Sweden). Dept. of Animal Ecology

    2000-05-01

    The impact of five sea-based wind power plants on two haulout sites for grey seals on southwestern Gotland, in the Baltic Sea, was analysed. Data on seal numbers was collected on a regular basis during the initial stages of the project from summer 1996, continuing during the building (autumn 1997) and running of the wind power plants (from spring 1998) until the end of June 1999. Additional observational data from earlier years was also available. Indications of lower occurrence and reduced number of seals in the area was found during periods of time in 1997 and 1998, times of construction and active running of the plants. However, no evidence on the wind power plants, per se, affecting the grey seals was found. Instead, several weather factors were found to affect the number of seals in the area, and periods of low occurrence and number of seals were more likely explained by i.e. unfavourable water levels and hard wind from certain directions. One important, short term, impact factor was however found. Human induced disturbances such as boat and helicopter traffic, some which were directly related to maintenance of the wind power plants, temporarily reduced number of seals and made them more restless. Disturbance thus constitutes a potential threat to seals. A shift from one to the other of the two haulout sites was also noted, a shift which likely is due to disturbances. Future guidelines are given, including some restrictions in movements near the haulout sites. Continued observations and studies are suggested if more off-shore wind power plants will be raised in the area. A call for more stringent use of environmental impact assessments is thus made. Also, suggestions on measures to be taken in order to reduce the effect of human related disturbances are made. In order to create sustainable conditions for a continued population of seals in the area and in order to create opportunities for a reestablishment of the grey seal in the southern Baltic region

  6. Basis of property limits for inflatable seal fluoroelastomers

    International Nuclear Information System (INIS)

    Sinha, N.K.; Raj, Baldev

    2012-01-01

    Identification of a set of governing physico-mechanical properties for inflatable seals of Prototype Fast Breeder Reactor (PFBR) and specification of their limits is described based on operating requirements, design practices and results from seal development. The limits of tensile strength, elongation at break, hardness, tear strength, fluid compatibility, compression set and specific gravity defined for the Viton GBL 200S/600S based inflatable seal formulation provide a standardized framework for regular production of reactor seals and a streamlined approach for compounding, design, manufacture and quality control. This assures significant reduction of efforts during the envisaged unification of Fast Breeder Reactor sealing based on four variations of inflatable seal compound which could result in a universal design code apart from significant gains in safety, reliability and life. The property set has potential use in Pressurized Heavy Water Reactor and Advanced Heavy Water Reactor. Inclusion of factors such as batch-to-batch variations of compound properties and their reproducibility during laboratory measurements, hot tensile behavior of fluoroelastomer, long term ageing effects and the margin of safety at the end of seal design life ensures the utility of property set in attaining its intended objective.

  7. Mechanical seal with textured sidewall

    Energy Technology Data Exchange (ETDEWEB)

    Khonsari, Michael M.; Xiao, Nian

    2017-02-14

    The present invention discloses a mating ring, a primary ring, and associated mechanical seal having superior heat transfer and wear characteristics. According to an exemplary embodiment of the present invention, one or more dimples are formed onto the cylindrical outer surface of a mating ring sidewall and/or a primary ring sidewall. A stationary mating ring for a mechanical seal assembly is disclosed. Such a mating ring comprises an annular body having a central axis and a sealing face, wherein a plurality of dimples are formed into the outer circumferential surface of the annular body such that the exposed circumferential surface area of the annular body is increased. The texture added to the sidewall of the mating ring yields superior heat transfer and wear characteristics.

  8. Investigation of brush seals for application in steam turbines

    International Nuclear Information System (INIS)

    Zorn, Peter

    2012-01-01

    Brush seals have high potential for efficiency increase compared to conventional labyrinth seals in steam turbines. Due to less experience in operation today there is a lot of scepticism with customers of steam turbine manufacturers. Therefore this thesis is investigating characteristics of this type of seal. Experiments and numerical models will be presented, which lead to better knowledge about leakages and influence of flow through seal onto dynamics of rotor in comparison to labyrinth seals. This thesis is increasing area of experience and one more positive reference.

  9. Post-Mating Sexual Behaviors of Oriental Storks (Ciconia boyciana) in Captivity.

    Science.gov (United States)

    Yoon, Jongmin; Ha, Hae-Sook; Jung, Jung-Shim; Park, Shi-Ryong

    2015-08-01

    Parental behaviors that vary by sex and breeding stage facilitate the survival of offspring in birds. Females invest in reproducing according to the level of direct and/or indirect benefits provided by males. Males face trade-offs from defending territories or nests, providing for the young, and seeking additional mating opportunities. We examined whether post-mating sexual behaviors such as courtship display and nest-building were associated with reproductive investments made by males and females in the current study. The oriental stork (Ciconia boyciana) is known as a solitary breeder that nests in tall trees and provides biparental care with long post-hatching development. We filmed parental behaviors in seven stork pairs in captivity for 655 hours (245 hours during nest-building, 218 hours during incubation, 328 hours during nestling, and 192 hours during the fledgling period). We found that paired mating behaviors such as synchronous allopreening and bill-clattering were highly skewed to the pre-incubation period. Males participated in nest-building more than females although both sexes shared similar parental care during the incubation and nestling period. Male nest-building was negatively correlated with male nest attentiveness only during the nestling period. Our results suggest that male oriental storks with higher nest-building effort might spend more time taking precautions against conspecific intruders or nest predators near the nests with chicks while the females were attending the nests in the form of biparental care.

  10. Gas-path leakage seal for a gas turbine

    Science.gov (United States)

    Wolfe, C.E.; Dinc, O.S.; Bagepalli, B.S.; Correia, V.H.; Aksit, M.F.

    1996-04-23

    A gas-path leakage seal is described for generally sealing a gas-path leakage-gap between spaced-apart first and second members of a gas turbine (such as combustor casing segments). The seal includes a generally imperforate foil-layer assemblage which is generally impervious to gas and is located in the leakage-gap. The seal also includes a cloth-layer assemblage generally enclosingly contacting the foil-layer assemblage. In one seal, the first edge of the foil-layer assemblage is left exposed, and the foil-layer assemblage resiliently contacts the first member near the first edge to reduce leakage in the ``plane`` of the cloth-layer assemblage under conditions which include differential thermal growth of the two members. In another seal, such leakage is reduced by having a first weld-bead which permeates the cloth-layer assemblage, is attached to the metal-foil-layer assemblage near the first edge, and unattachedly contacts the first member. 4 figs.

  11. Dye filled security seal

    International Nuclear Information System (INIS)

    Wilson, D.C.

    1982-01-01

    A security seal for providing an indication of unauthorized access to a sealed object includes an elongate member to be entwined in the object such that access is denied unless the member is removed. The elongate member has a hollow, pressurizable chamber extending throughout its length that is filled with a permanent dye under greater than atmospheric pressure. Attempts to cut the member and weld it together are revealed when dye flows through a rupture in the chamber wall and stains the outside surface of the member

  12. Fuel cell cassette with compliant seal

    Science.gov (United States)

    Karl, Haltiner, Jr. J.; Anthony, Derose J.; Klotzbach, Darasack C.; Schneider, Jonathan R.

    2017-11-07

    A fuel cell cassette for forming a fuel cell stack along a fuel cell axis includes a cell retainer, a plate positioned axially to the cell retainer and defining a space axially with the cell retainer, and a fuel cell having an anode layer and a cathode layer separated by an electrolyte layer. The outer perimeter of the fuel cell is positioned in the space between the plate and the cell retainer, thereby retaining the fuel cell and defining a cavity between the cell retainer, the fuel cell, and the plate. The fuel cell cassette also includes a seal disposed within the cavity for sealing the edge of the fuel cell. The seal is compliant at operational temperatures of the fuel cell, thereby allowing lateral expansion and contraction of the fuel cell within the cavity while maintaining sealing at the edge of the fuel cell.

  13. Comparison of clinical parameters in captive Cracidae fed traditional and extruded diets.

    Science.gov (United States)

    Candido, Marcus Vinicius; Silva, Louise C C; Moura, Joelma; Bona, Tania D M M; Montiani-Ferreira, Fabiano; Santin, Elizabeth

    2011-09-01

    The Cracidae family of neotropical birds is regarded as one of the most severely threatened in the world. They traditionally have been extensively hunted, and, thus, ex situ efforts for their conservation are recommended and involve the optimization of their care in captivity. Nutrition is a fundamental aspect of husbandry, which influences survival and reproduction in captivity. In this study, a total of 29 animals, including 3 species (Penelope obscura, Penelope superciliaris, and Aburria jacutinga), were subjected to monthly physical examination and blood sampling before and after dietary conversion from the traditional diet of broiler feed, fruits, and vegetables to a nutritionally balanced commercial diet specifically designed for wild Galliformes. The diet change produced differences in several parameters tested, including an increase (P < 0.05) in hemoglobin concentration for all species. Increases (P < 0.05) in erythrocyte count, packed cell volume, and body weight were observed in P. obscura, with a concomitant decrease in the standard deviation for such parameters that show improved uniformity. Globulins and lipase also were reduced (P < 0.05) in P. obscura. Although leukocyte count was lowered and eosinophils were increased in all 3 species after dietary conversion, only these 2 changes were significant (P < 0.05) in P. superciliaris. A. jacutinga had higher (P < 0.05) blood glucose concentrations than the other species, but diet had no effect on this parameter. Blood uric acid concentrations were higher (P < 0.05) after conversion to the commercial diet in P superciliaris. The provision of a commercial extruded diet as a single food source was beneficial, which led to a general improvement in clinical aspects and group uniformity in these 3 species of Cracidae.

  14. Failure of Magnetic Fluid Seals Operating in Water: Preliminary Conclusions

    Directory of Open Access Journals (Sweden)

    Matuszewski Leszek

    2017-06-01

    Full Text Available The article analyses properties of magnetic fluid seals installed in rotary sealing nodes which operate in the utility water environment. Seals of this type have been examined as a possible solution to the problem with ship manoeuvring propulsion sealing. The present analysis bases on laboratory durability tests of magnetic fluid seals exposed to longterm utility water loads, at different water pressures and shaft revolutions. The basic seal durability criterion was the number of revolutions made by the sealing node shaft until the appearance of water tightness loss (leakage. It was found that the main factor leading to the wear of the seal is the relative speed of the magnetic fluid with respect to that of the utility water, and this process is heavily affected by the pressure acting on the seal. The reported test results are presented in the form of diagrams showing the seal durability (time until water tightness loss as a function of rotational speed. The curves shown in the diagrams are regular, with two different rotational speed ranges: the highspeed range, when the tightness loss is relatively fast, and the low-speed range, with a clear tendency to prolong the seal lifetime. These diagrams were given the name of durability curves of the MF seal operating in water. The results of the performed tests suggest formal similarity between the experimental data distribution concerning tightness loss processes occurring in magnetic fluid seals operating in water environment and metal fatigue processes. The article proposes a preliminary simplified durability model to describe the examined phenomenon.

  15. Genetic assessments and parentage analysis of captive Bolson tortoises (Gopherus flavomarginatus inform their "rewilding" in New Mexico.

    Directory of Open Access Journals (Sweden)

    Taylor Edwards

    Full Text Available The Bolson tortoise (Gopherus flavomarginatus is the first species of extirpated megafauna to be repatriated into the United States. In September 2006, 30 individuals were translocated from Arizona to New Mexico with the long-term objective of restoring wild populations via captive propagation. We evaluated mtDNA sequences and allelic diversity among 11 microsatellite loci from the captive population and archived samples collected from wild individuals in Durango, Mexico (n = 28. Both populations exhibited very low genetic diversity and the captive population captured roughly 97.5% of the total wild diversity, making it a promising founder population. Genetic screening of other captive animals (n = 26 potentially suitable for reintroduction uncovered multiple hybrid G. flavomarginatus×G. polyphemus, which were ineligible for repatriation; only three of these individuals were verified as purebred G. flavomarginatus. We used these genetic data to inform mate pairing, reduce the potential for inbreeding and to monitor the maintenance of genetic diversity in the captive population. After six years of successful propagation, we analyzed the parentage of 241 hatchlings to assess the maintenance of genetic diversity. Not all adults contributed equally to successive generations. Most yearly cohorts of hatchlings failed to capture the diversity of the parental population. However, overlapping generations of tortoises helped to alleviate genetic loss because the entire six-year cohort of hatchlings contained the allelic diversity of the parental population. Polyandry and sperm storage occurred in the captives and future management strategies must consider such events.

  16. Long-term sealing of openings in salt formations

    International Nuclear Information System (INIS)

    Walter, F.; Stockmann, N.; Yaramanci, U.; Laurens, J.F.

    1993-01-01

    Radioactive wastes can be disposed of in deep salt formations. Rock salt is a suitable geologic medium because of its unique characteristics. Open boreholes, shafts and drifts are created to provide physical access to the repository. Long-term seals must be emplaced in those potential pathways to prevent radioactive release to the biosphere. The sealing materials must be mechanically and, most important, geochemically stable within the host rock. Salt bricks made of compressed salt-powder are understood to be the first choice long-term sealing material. Seals built from salt bricks will be ductile. The permeability of the salt bricks is assumed to be in the order of 2*10 -15 m 2 . Large sealing systems are built by combining the individual bricks with mortar. Raw materials for mortar are fine-grained halite powder and ground saliferous clay. The permeability of the mortar decreases with its salt content to approx. 2*10 -14 m 2 . Moistened saliferous clay may show temporary swelling. Sealing experiments will be carried out in the Asse salt mine. Long-term seals will be built into holes of 1 m diameter. The contact and merging of the brick-wall with the surrounding rock salt will be investigated in long-term tests. Within the in situ sealing program a number of geophysical methods are applied. Acoustic emission measurements are used to study the effects of high pressure gas injection and a geoelectrical observation program is aiming to estimate the permeability in and around the long-term seal. High frequency electromagnetic methods contribute to the knowledge of the petrophysical rock properties. 11 refs., 12 figs

  17. Technological progress in sealed lead/acid batteries

    Science.gov (United States)

    Yamashita, J.; Nakashima, H.; Kasai, Y.

    A brief review is given of the history of the research and development of sealed lead/acid batteries during the 30 years since, in 1959, the Yuasa Battery Co. introduced a small-sized sealed battery as the power supply for portable television sets. In 1965, Yuasa began the full-scale mass production and sale of a small-sized sealed lead/acid battery under the NOYPER brand. In 1970, the use of a PbCa alloy grid was adopted, and there followed the successful development of a sealed battery with an oxygen-recombination facility. In 1976, Yuasa more or less established the basic technology for the valve-regulated sealed lead/acid battery — the NP battery — which is now the type in general use. Throughout the 1980s, Yuasa, has continued development in order to expand the sphere of application for the production technology of valve-regulated batteries for motorcycles, as well as for stationary duties with large capacities of 100 to 3000 A h. Recently, in order to improve the reliability and boost the output of sealed lead/acid batteries for employment in UPS power sources, Yuasa has been working intently on the design of a valve-regulated lead/acid battery with outstanding characteristics for high-rate discharge and resistance to high temperatures.

  18. Sealing a Loosely Fitting Valve Assembly

    Science.gov (United States)

    Goff, L.; Tellier, G.

    1986-01-01

    Double-ring seal avoids expense of remachining or redesigning valve parts. Mating fittings on valve sealed by pair of rings - one O-ring and backup ring. Backup ring fills relatively large gap between parts. Prevents softer O-ring from being pushed into and through gap.

  19. Electromagnetic shaft seal

    International Nuclear Information System (INIS)

    Takahashi, Kenji.

    1994-01-01

    As an electromagnetic shaft seal, there are disposed outwarding electromagnetic induction devices having generating power directing to an electroconductive fluid as an object of sealing, and inwarding electromagnetic induction device added coaxially. There are disposed elongate rectangular looped first coils having a predetermined inner diameter, second coils having the same shape and shifted by a predetermined pitch relative to the first coil and third coil having the same shape and shifted by a predetermined pitch relative to the second coil respectively each at a predetermined inner diameter of clearance to the outwarding electromagnetic induction devices and the inwarding electromagnetic induction device. If the inwarding electromagnetic induction device and the outwarding electromagnetic induction device are operated, they are stopped at a point that the generating power of the former is equal with the sum of the generating power of the latter and a differential pressure. When three-phase AC is charged to the first coil, the second coil and the third coil successively, a force is generated in the advancing direction of the magnetic field in the electroconductive fluid by the similar effect to that of a linear motor, and the seal is maintained at high reliability. Moreover, the limit for the rotational angle of the shaft is not caused. (N.H.)

  20. Enclosed mechanical seal face design for brittle materials copyright

    International Nuclear Information System (INIS)

    Marsi, J.A.

    1994-01-01

    Metal carbides are widely used as seal face material due to their hardness and wear resistance. Silicon carbide (SiC) has excellent performance as a seal face material, but it is relatively brittle and may break due to accidental overloads outside the boundary of normal operating conditions. In mechanical seals for nuclear primary coolant pumps, the shattered SiC pieces can get into the reactor system and cause serious damage. The conventional method of containing an SiC seal face is to shrink-fit it in a holder, which may lead the seal designer to contend with unwanted seal face deflections. This paper presents a successful, tested design which does not rely on shrink-fits. 5 refs., 9 figs., 4 tabs

  1. High-Pressure Hot-Gas Self-Acting Floating Ring Shaft Seal for Liquid Rocket Turbopumps. [tapered bore seals

    Science.gov (United States)

    Burcham, R. E.; Diamond, W. A.

    1980-01-01

    Design analysis, detail design, fabrication, and experimental evaluation was performed on two self acting floating ring shaft seals for a rocket engine turbopump high pressure 24132500 n/sq m (3500 psig) hot gas 533 K 9500 F) high speed 3142 rad/sec (30000 rmp) turbine. The initial design used Rayleigh step hydrodynamic lift pads to assist in centering the seal ring with minimum rubbing contact. The final design used a convergent tapered bore to provide hydrostatic centering force. The Rayleigh step design was tested for 107 starts and 4.52 hours total. The leakage was satisfactory; however, the design was not acceptable due to excessive wear caused by inadequate centering force and failure of the sealing dam caused by erosion damage. The tapered bore design was tested for 370 starts and 15.93 hours total. Satisfactory performance for the required life of 7.5 hours per seal was successfully demonstrated.

  2. Prevalence of intestinal parasites among captive Asian Elephants Elephas maximus: effect of season, host demography, and management systems in Tamil Nadu, India

    Directory of Open Access Journals (Sweden)

    V. Vanitha

    2011-02-01

    Full Text Available Maintenance of wild animals in captivity is fraught with numerous challenges, including the control of disease. This study evaluates the effect of season, host demography (age-sex, and differing management systems on the prevalence of intestinal parasites among elephants managed in three captive systems: temple, private, and forest department, in Tamil Nadu. In addition, the study also assessed the availability of veterinary care for elephants in these systems. The parasitic prevalence was evaluated by direct microscopic identification of helminth eggs in faecal samples (n = 115 collected from different age/sex classes of elephants. Of the 115 elephants examined, 37% showed positive results, being infected only with Strongyles sp. The prevalence rate varied significantly across seasons, with the highest rate during summer (49% followed by monsoon (41% and the lowest rate during winter (15%. While males had a significantly lower parasite prevalence compared to females (29% vs. 40%, age classes showed no significant difference. Despite the fact that the proportion of animals receiving veterinary care was higher under the forest department system (100% compared to the private system (26%, parasite prevalence was significantly higher under the former (48% than the latter (31% system. The difference in the proportion of animals with parasitic prevalence among the three systems could be due to differing management practices (i.e. in solitary versus groups and the details are discussed.

  3. Patterns of oocyte development in natural habitat and captive Salminus hilarii Valenciennes, 1850 (Teleostei: Characidae).

    Science.gov (United States)

    Honji, R M; Narcizo, A M; Borella, M I; Romagosa, E; Moreira, R G

    2009-03-01

    Fecundity and oocyte development in Salminus hilarii female brood stock were analyzed with the aim of investigating the impact of migration impediment on oogenesis. Histological analyses of the ovaries were performed in adult females caught in two different environments--the Tietê River (natural) and captivity--and the gonadossomatic index, oocyte diameter and fecundity determined. Five germ cell development stages (oogonium, perinucleolar, cortical alveoli, vitellogenic, ripe) and two other structures (postovulatory follicles and atretic oocytes) were observed in females caught in the river. Captive animals lacked the ripe oocytes and postovulatory follicles and had a relatively higher number of atretic oocytes. Females in captivity are known to produce larger oocytes, and they release fewer eggs in each spawn (absolute fecundity) when compared with animals that are able to migrate. Our results suggest that the Tietê River is undergoing alterations which are being reflected in the reproductive performance of S. hilarii, mainly due to the presence of atretic oocytes in females caught in the river. The lack of postovulatory follicles and ripe oocytes in captive animals reveals that migratory impediment negatively impacts final oocyte maturation. However, the stage of maturation reached is adequate for ovulation induction with hormone manipulation.

  4. Serum Chemistry Variables of Bengal Tigers (Panthera tigris tigris Kept in Various Forms of Captivity

    Directory of Open Access Journals (Sweden)

    U. Farooq*, S. Sajjad1, M. Anwar1 and B.N. Khan2

    2012-05-01

    Full Text Available There is a dearth of published literature regarding the effect of captivity on serum chemistry variables of tigers kept in the zoos and wildlife sanctuaries. The present study was hence conducted to determine and compare serum chemistry values in tigers of Bengal origin (Panthera tigris tigris kept in captivity at Lahore zoo (LZ (n=4 and in semi natural environment of Lahore Wildlife Park (LWP (n=6, Pakistan. The tigers kept at LZ had significantly (P<0.05 higher mean concentrations of Cl- (108.6±0.57 versus 105.6±0.49 mmol/l and a significantly lower creatinine (1.78±0.06 versus 3.04±0.35mg/dl and AST values (41.66±0.77 versus 54.88±4.22 U/l than tigers kept at LWP. No other significant differences in serum chemistry were observed for both forms of captivity. Results would be useful for the evaluation of physiological and pathological alterations in wild and captive tiger individuals and populations not only in Pakistan but also for other countries harboring the Bengal tigers.

  5. Fluid moderator control system fuel assembly seal connector

    International Nuclear Information System (INIS)

    Veronesi, L.; Tower, S.N.; Klassen, W.E.

    1987-01-01

    A nuclear reactor is described comprising fuel assemblies having one or more flow channels therethrough, a core support plate having one or more flow channels therethrough, and seal connectors for sealingly connecting the one or more flow channels in the core support plate with the one or more flow channels in the fuel assemblies. The seal connectors each comprises a first portion and second portion each comprising an elongated member having a flow channel therethrough and being in substantial axial alignment with each other and being separated by a space therebetween, means for sealingly connecting the first portion o one or the one or more flow channels in the fuel assemblies, means for sealingly connecting the second portion to the first portion and for allowing relative motion between the portions, means for limiting the relative motion of the first and second portion in directions toward and away from each other, means for reconnectingly connecting and resealingly sealing the second portion to one of the one or more flow channels in the core support plate. It comprises a slip fit connection whereby the remote end of the second portion fits within whereby the remote end of the second portion fits within an opening in the core support plate which is in flow communication with the one or more flow channels in the core support plate and further comprises a ball and cones seal in series with axially spaced ring seals

  6. Oral, Maxillofacial and Dental Diseases in Captive Cheetahs (Acinonyx jubatus).

    Science.gov (United States)

    Steenkamp, G; Boy, S C; van Staden, P J; Bester, M N

    2018-01-01

    Descriptions of several oral, maxillofacial and dental conditions/diseases exist for a variety of captive large felids, but little is reported on the pathology of free roaming large felids. Apart from focal palatine erosions (FPEs) as initially described by Fitch and Fagan (1982) and some reference to absent incisor teeth, few data exist on diseases affecting the oral, maxillofacial and dental structures of cheetahs (Acinonyx jubatus), regardless of their captivity status. This study reports 18 different conditions affecting the teeth, bone and oral cavity soft tissue of cheetahs, based on initial assessment of 256 animals over 11 years (2002-2012) in South Africa and Namibia. This report excludes oral tumours or FPEs, but includes several acquired and developmental conditions never described before. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. A Study on Sealing Process of Anodized Al Alloy Film

    Science.gov (United States)

    Tsujita, Takeshi; Sato, Hiroshi; Tsukahara, Sonoko; Ishikawa, Yuuichi

    Since sealing is an important process to improve the corrosion resistance in practical application of anodized aluminum, we prepared anodic oxide films on A5052 alloy in an oxalic acid bath and a sulfuric acid bath, sealed them at various conditions, and analyzed them by scanning electron microscopy, acid-dissolution examination, admittance measurements and infrared spectroscopy. The pore radius of the oxalic acid anodized film was about 5 times larger than that of sulfuric acid anodized film, while the corrosion resistance of the former showed about 2 times higher value than the latter with the same sealed state and amount of hydroxide formed by sealing process of the former was 6 times larger than the latter, respectively. Steam sealing formed dense hydroxide and boiling water sealing formed big coral-like hydroxide, whereas the corrosion resistance of the film sealed by the former showed about 1.5 times higher value than that sealed by the latter, respectively. Thus microstructure of anodic oxide films and their surface morphology after sealing process clearly depended on their anodizing solution and the sealing condition and showed obvious relation to electric and corrosive properties.

  8. Shaft seal assembly for high speed and high pressure applications

    Science.gov (United States)

    Hadt, W. F.; Ludwig, L. P. (Inventor)

    1979-01-01

    A seal assembly is provided for reducing the escape of fluids from between a housing and a shaft rotably mounted in the housing. The seal assembly comprises a pair of seal rings resiliently connected to each other and disposed in side-by-side relationship. In each seal ring, both the internal bore surface and the radial face which faces away from the other seal ring are provided with a plurality of equi-spaced recesses. The seal faces referred to are located adjacent a seating surface of the housing. Under normal operating conditions, the seal assembly is stationary with respect to the housing, and the recesses generate life, keep the assembly spaced from the rotating shaft and allow slip therebetween. The seal assembly can seize on the shaft, and slip will then occur between the radial faces and the housing.

  9. Improvement in oil seal performance of gas compressor in HTTR

    International Nuclear Information System (INIS)

    Oyama, Sunao; Hamamoto, Shimpei; Nemoto, Takahiro; Sekita, Kenji; Isozaki, Minoru; Emori, Kouichi; Ohta, Yukimaru; Mizushima, Toshihiko; Kaneshiro, Noriyuki; Ito, Yoshiteru; Yamamoto, Hideo

    2007-08-01

    High-Temperature engineering Test Reactor (HTTR) built by Japan Atomic Energy Agency (JAEA) has reciprocating compressor commonly used to extract and discharge helium gas into primary/secondary coolant helium loop from helium purification system. Piston rod seal of the compressor consist of several components to prevent coolant leak. However, rod seal system has weak reliability during long term operation due to repeated leakage of seal oil in operation. As a result of investigations, leakage's root is found in that seal were used in a range beyond limit sliding properties of seal material. For this reason, a lip of the seal was worn and transformed itself and was not able to sustain a seal function. Therefore, through tests using facility actual equipment for endurance of candidate materials, one seal material were chosen for long term operation. (author)

  10. Use of loop-seals for the control of the overpressures in hydraulic transients evolving in a sea service water system

    Energy Technology Data Exchange (ETDEWEB)

    Canetta, D.; Capozza, A.; Iovino, G.

    1985-01-01

    The transient response following pump trip-offs and start-ups was investigated in the sea water system of a nuclear power plant. Specific care was devoted to water column separation and cavity collapse phenomena. A computer program designed for analysis of complex hydraulic networks was used. It is found that dangerous overpressures can be avoided by the use of loop seals. The design of the vacuum breaker valves of the loop seals and the optimization of overall transient behavior is discussed. 1 reference.

  11. Application of a magnetic fluid seal to rotary blood pumps

    International Nuclear Information System (INIS)

    Mitamura, Y; Arioka, S; Azegami, M; Sakota, D; Sekine, K

    2008-01-01

    A magnetic fluid seal enables mechanical contact-free rotation of a shaft without frictional heat and material wear and hence has excellent durability. However, the durability of a magnetic fluid seal decreases in liquid. The life of a seal applied to a rotary blood pump is not known. We have developed a magnetic fluid seal that has a shield mechanism minimizing the influence of the rotary pump on the magnetic fluid. The developed magnetic fluid seal worked for over 286 days in a continuous flow condition, for 24 days (on-going) in a pulsatile flow condition and for 24 h (electively terminated) in blood flow. The magnetic fluid seal is promising as a shaft seal for rotary blood pumps

  12. VACOSS - variable coding seal system for nuclear material control

    International Nuclear Information System (INIS)

    Kennepohl, K.; Stein, G.

    1977-12-01

    VACOSS - Variable Coding Seal System - is intended to seal: rooms and containers with nuclear material, nuclear instrumentation and equipment of the operator, instrumentation and equipment at the supervisory authority. It is easy to handle, reusable, transportable and consists of three components: 1. Seal. The light guide in fibre optics with infrared light emitter and receiver serves as lead. The statistical treatment of coded data given in the seal via adapter box guarantees an extremely high degree of access reliability. It is possible to store the data of two undue seal openings together with data concerning time and duration of the opening. 2. The adapter box can be used for input or input and output of data indicating the seal integrity. 3. The simulation programme is located in the computing center of the supervisory authority and permits to determine date and time of opening by decoding the seal memory data. (orig./WB) [de

  13. Test of Seal System for Flexible Pipe End Fitting

    DEFF Research Database (Denmark)

    Banke, Lars; Jensen, Thomas Gregers

    1999-01-01

    The purpose of the end fitting seal system is to ensure leak proof termination of flexible pipes. The seal system of an NKT end fitting normally consists of a number of ring joint gaskets mounted in a steel sleeve on the outside of the polymeric inner liner of the pipe. The seal system is activated...... by compression of the gaskets, thus using the geometry to establish a seal towards the inner liner of the pipe and the steel sleeve of the end fitting. This paper describes how the seal system of an end fitting can be tested using an autoclave. By regulating temperature and pressure, the seal system can...... be tested up to 130oC and 51.7 MPa. Pressure, temperature and the mechanical behaviours of the pipe are measured for use in further research. The set-up is used to test the efficiency of the seal system as function of parameters such as cross sectional shapes of the gaskets, tolerances between gaskets...

  14. Stirling engine or heat pump having an improved seal

    Science.gov (United States)

    White, Maurice A.; Riggle, Peter; Emigh, Stuart G.

    1985-01-01

    A Stirling Engine or Heat Pump having two relatively movable machine elements for power transmission purposes includes a hermetic seal bellows interposed between the elements for separating a working gas from a pressure compensating liquid that balances pressure across the bellows to reduce bellows stress and to assure long bellows life. The volume of pressure compensating liquid displaced due to relative movement between the machine elements is minimized by enclosing the compensating liquid within a region exposed to portions of both machine elements at one axial end of a slidable interface presented between them by a clearance seal having an effective diameter of the seal bellows. Pressure equalization across the bellows is achieved by a separate hermetically sealed compensator including a movable enclosed bellows. The interior of the compensator bellows is in communication with one side of the seal bellows, and its exterior is in communication with the remaining side of the seal bellows. A buffer gas or additional liquid region can be provided at the remaining axial end of the clearnace seal, along with valved arrangements for makeup of liquid leakage through the clearance seal.

  15. Blood lipid concentrations and lipoprotein patterns in captive and wild American black bears (Ursus americanus).

    Science.gov (United States)

    Frank, Nicholas; Elliott, Sarah B; Allin, Shawn B; Ramsay, Edward C

    2006-02-01

    To compare blood lipid concentrations and lipoprotein patterns for captive and wild American black bears (Ursus americanus). 7 captive and 9 wild adult (> or = 4 years old) black bears. Blood was collected from 2 groups of captive black bears (groups A and B) and 1 group of wild black bears (group C). Blood triglyceride (TG) and cholesterol concentrations were compared among groups. Plasma lipoproteins were isolated by use of a self-generating gradient of iodixanol, and lipoprotein patterns were compared between groups A and B. Captive bears (mean +/- SD, 187.8 +/- 44.4 kg) weighed significantly more than wild bears (mean, 104.8 +/- 41.4 kg), but mean body weight did not differ between groups A and B. Mean blood TG concentrations for groups B (216.8 +/- 16.0 mg/dL) and C (190.7 +/- 34.0 mg/dL) were significantly higher than that of group A (103.9 +/- 25.3 mg/dL). Mean blood cholesterol concentration was also significantly higher for group B (227.8 +/- 8.2 mg/dL) than for groups A (171.7 +/- 35.5 mg/dL) or C (190.8 +/- 26.8 mg/dL). Mean very-low-density lipoprotein TG and low-density lipoprotein cholesterol concentrations were 2- and 3-fold higher, respectively, for group B, compared with concentrations for group A. Blood lipid concentrations vary significantly among populations of black bears. Plasma lipoprotein patterns of captive bears differed significantly between colonies and may have reflected differences in diet or management practices.

  16. Performance assessment of sealing systems. Conceptual and integrated modelling of plugs and seals

    Energy Technology Data Exchange (ETDEWEB)

    Ruebel, Andre; Buhmann, Dieter; Kindlein, Jonathan; Lauke, Thomas

    2016-08-15

    The long-time isolation of radionuclides from the biosphere is the goal of the storage of radioactive waste in deep geological repositories. For repositories in rock salt, this goal is achieved on the one hand by the impermeable undisturbed part of the salt host rock formation and on the other hand by crushed salt, which is used to backfill the mine openings in the emplacement areas and galleries created during the construction of the repository. The crushed salt backfill is compacted over time and achieves a sufficiently high hydraulic resistance to avoid inflow of brines into the emplacement areas of the repository in the long-term. Plugs and seals must additionally provide their sealing function during the early post closure phase, until the compaction of the backfill is adequate and the permeability of the backfill is sufficiently low. To assess the future development of the waste repository, an adequate knowledge of the material behaviour is necessary and related mathematical models must be developed to be able to perform predictions on the long-term safety of the repository. An integrated performance assessment model was formulated that describes the long-term behaviour of a sealing built from salt concrete. The average permeability of the sealing changes with time after its emplacement from various processes of which two were regarded in a constitutive model: first, the healing of the EDZ in the host rock around the sealing, and second, the corrosion of the salt concrete material resulting from brine attack. Empirical parameter model functions were defined for both processes to reflect the actual behaviour. The mathematical model was implemented in the integrated performance assessment model LOPOS which is used by GRS as near-field model for repositories in salt. Deterministic and probabilistic calculations were performed with realistic parameters showing how the permeability of the sealing decreases during the first 2 000 years due to the healing of the EDZ

  17. Performance assessment of sealing systems. Conceptual and integrated modelling of plugs and seals

    International Nuclear Information System (INIS)

    Ruebel, Andre; Buhmann, Dieter; Kindlein, Jonathan; Lauke, Thomas

    2016-08-01

    The long-time isolation of radionuclides from the biosphere is the goal of the storage of radioactive waste in deep geological repositories. For repositories in rock salt, this goal is achieved on the one hand by the impermeable undisturbed part of the salt host rock formation and on the other hand by crushed salt, which is used to backfill the mine openings in the emplacement areas and galleries created during the construction of the repository. The crushed salt backfill is compacted over time and achieves a sufficiently high hydraulic resistance to avoid inflow of brines into the emplacement areas of the repository in the long-term. Plugs and seals must additionally provide their sealing function during the early post closure phase, until the compaction of the backfill is adequate and the permeability of the backfill is sufficiently low. To assess the future development of the waste repository, an adequate knowledge of the material behaviour is necessary and related mathematical models must be developed to be able to perform predictions on the long-term safety of the repository. An integrated performance assessment model was formulated that describes the long-term behaviour of a sealing built from salt concrete. The average permeability of the sealing changes with time after its emplacement from various processes of which two were regarded in a constitutive model: first, the healing of the EDZ in the host rock around the sealing, and second, the corrosion of the salt concrete material resulting from brine attack. Empirical parameter model functions were defined for both processes to reflect the actual behaviour. The mathematical model was implemented in the integrated performance assessment model LOPOS which is used by GRS as near-field model for repositories in salt. Deterministic and probabilistic calculations were performed with realistic parameters showing how the permeability of the sealing decreases during the first 2 000 years due to the healing of the EDZ

  18. Methicillin resistance gene diversity in staphylococci isolated from captive and free-ranging wallabies

    Directory of Open Access Journals (Sweden)

    Michelle M. S. Chen

    2016-05-01

    Full Text Available Background: Infection with methicillin-resistant staphylococci (MRS can be life-threatening in humans and its presence in animals is a cause for public health concern. The aim of this study was to measure the prevalence of MRS in captive and free-ranging wallabies over a 16-month period in South Australia, Australia. Materials and methods: Eighty-nine purified staphylococcal isolates recovered from 98 captive and free-ranging wallabies' anterior nasal swabs were used in this study. All isolates were tested for the presence of the mecA, mecA1, and mecC genes. Multiplex PCR-directed SCCmec-typing, ccrB-typing, and determination of the minimal inhibitory concentration of oxacillin were performed on mec-positive isolates. Results and discussion: In total, 11 non-Staphylococcus aureus MRS were isolated from 7 out of 98 animals, corresponding to a 7.1% carriage rate. The SCCmec types I, III, and V were identified by multiplex PCR and sequencing of the ccrB gene. This is the first report of MRS carriage in both captive and free-ranging wallabies in Australia. These data demonstrate a low prevalence of MRS and no association between wallaby captivity status and MRS carriage could be assigned. These animals may act as a reservoir for the exchange of genetic elements between staphylococci. Furthermore, the mecA genes of animal isolates were identical to that found in human MRS strains and thus the possibility of zoonotic transfer must be considered.

  19. Materials for water pump mechanical seals

    International Nuclear Information System (INIS)

    Brousse, P.

    1992-01-01

    In view of the continually increasing power ratings of conventional and nuclear power plants and the related reliability and safety problems, plant builders have had to develop seal systems compatible with current water pump performances. In 1970, EDF/R and DD was already concerned by this problem. It soon became obvious that the nature of the materials used for the friction surfaces was decisive for seal durability. Exceptional loads (transients, high vibration levels, etc...) hasten aging. To begin with, friction surfaces consisted of a hard material (tungsten carbide) mated with a soft material (carbon). Resistance was unpredictable and not compatible with industrial requirements. Tests performed on the EDF/R and DD test benches evidenced the same types of degradation. The mechanical seal manufacturers then began to use ceramic materials (silicon carbide), which raised high expectations. Unfortunately, these were recent materials and their manufacturing process was not thoroughly understood. Hopes were soon dashed in many applications, including that of mechanical seals. Fluctuating results were obtained over the next few years. The raw material suppliers made progress, especially with regard to reducing fragility. On a parallel, the mechanical seal manufacturers initiated comparative tests on the friction resistance of materials. It has also been established that ceramics have to be stringently supervised at all levels: part design, inspection, assembly, use. EDF has much insisted that mechanical seal suppliers guarantee the constant quality of their products. EDF/R and DD has systematically tested new sensitive devices, under normal and exceptional conditions, prior to their installation at the plants. At the present time, the silicon carbides proposed by the mechanical seal suppliers are entirely satisfactory. The carbon mating surface was far less problematic. The required reliability was obtained by replacing resin binder carbons by the more resistant

  20. Hepatic lipidosis and other test findings in two captive adult porcupines (Erethizon dorsatum) dying from a "sudden death syndrome".

    Science.gov (United States)

    Barigye, Robert; Schamber, Ev; Newell, Teresa K; Dyer, Neil W

    2007-11-01

    Routine postmortem examination and histologic evaluation of tissue sections demonstrated hepatic lipidosis (HL) in 2 adult captive porcupines with a history of sudden death. The male porcupine had a markedly enlarged pale liver that microscopically showed large unilocular vacuoles within hepatocellular cytoplasm. The periparturient female had similar but less marked hepatic lesions and an incidental pulmonary mycosis. These findings suggest HL as an important differential of spontaneous death in captive porcupines. It is hypothesized that in addition to the widely documented causes, HL in captive porcupines may be specifically associated with nutritional imbalances caused by the feeding of unsuitable commercial diets. The possible association of the condition with dietary and other factors in captive porcupines needs to be thoroughly investigated.

  1. The CANDU irradiated fuel safeguards sealing system at the threshold of implementation

    International Nuclear Information System (INIS)

    Stirling, A.J.; Kupca, S.; Martin, R.E.; West, R.J.; Aikens, A.E.; Cox, C.A.; White, B.F.; Smith, M.T.; Payne, W.E.

    1985-07-01

    The development of a safeguards containment and surveillance system for the irradiated fuel discharged from CANDU nuclear generating stations has inspired the development of three different sealing technologies. Each seal type utilizes a random seal identity of different design. The AECL Random Coil (ARC) Seal combines the identity and integrity elements in the ultrasonic signature of a wire coil. Two variants of an optical seal have been developed which features identity elements of crystalline zirconium and aluminum. The sealed cap-seal uses a conventional IAEA 'Type X Seal' (wire seal). The essential features and relative merits of each seal design are described

  2. Temporary fire sealing of penetrations on TFTR

    International Nuclear Information System (INIS)

    Hondorp, H.L.

    1981-02-01

    The radiation shielding provided for TFTR for D-D and D-T operation will be penetrated by numerous electrical and mechanical services. Eventually, these penetrations will have to be sealed to provide the required fire resistance, tritium sealability, pressure integrity and radiation attenuation. For the initial hydrogen operation, however, fire sealing of the penetrations in the walls and floor is the primary concern. This report provides a discussion of the required and desirable properties of a temporary seal which can be used to seal these penetrations for the hydrogen operation and then subsequently be removed and replaced as required for the D-D and D-T operations. Several candidate designs are discussed and evaluated and recommendations are made for specific applications

  3. Wafer-level packaging with compression-controlled seal ring bonding

    Science.gov (United States)

    Farino, Anthony J

    2013-11-05

    A device may be provided in a sealed package by aligning a seal ring provided on a first surface of a first semiconductor wafer in opposing relationship with a seal ring that is provided on a second surface of a second semiconductor wafer and surrounds a portion of the second wafer that contains the device. Forcible movement of the first and second wafer surfaces toward one another compresses the first and second seal rings against one another. A physical barrier against the movement, other than the first and second seal rings, is provided between the first and second wafer surfaces.

  4. O-Ring sealing arrangements for ultra-high vacuum systems

    Science.gov (United States)

    Kim, Chang-Kyo; Flaherty, Robert

    1981-01-01

    An all metal reusable O-ring sealing arrangement for sealing two concentric tubes in an ultra-high vacuum system. An O-ring of a heat recoverable alloy such as Nitinol is concentrically positioned between protruding sealing rings of the concentric tubes. The O-ring is installed between the tubes while in a stressed martensitic state and is made to undergo a thermally induced transformation to an austenitic state. During the transformation the O-ring expands outwardly and contracts inwardly toward a previously sized austenitic configuration, thereby sealing against the protruding sealing rings of the concentric tubes.

  5. Bentonite as a waste isolation pilot plant shaft sealing material

    International Nuclear Information System (INIS)

    Daemen, J.; Ran, Chongwei

    1996-12-01

    Current designs of the shaft sealing system for the Waste Isolation Pilot Plant (WIPP) propose using bentonite as a primary sealing component. The shaft sealing designs anticipate that compacted bentonite sealing components can perform through the 10,000-year regulatory period and beyond. To evaluate the acceptability of bentonite as a sealing material for the WIPP, this report identifies references that deal with the properties and characteristics of bentonite that may affect its behavior in the WIPP environment. This report reviews published studies that discuss using bentonite as sealing material for nuclear waste disposal, environmental restoration, toxic and chemical waste disposal, landfill liners, and applications in the petroleum industry. This report identifies the physical and chemical properties, stability and seal construction technologies of bentonite seals in shafts, especially in a saline brine environment. This report focuses on permeability, swelling pressure, strength, stiffness, longevity, and densification properties of bentonites

  6. Bentonite as a waste isolation pilot plant shaft sealing material

    Energy Technology Data Exchange (ETDEWEB)

    Daemen, J.; Ran, Chongwei [Univ. of Nevada, Reno, NV (United States)

    1996-12-01

    Current designs of the shaft sealing system for the Waste Isolation Pilot Plant (WIPP) propose using bentonite as a primary sealing component. The shaft sealing designs anticipate that compacted bentonite sealing components can perform through the 10,000-year regulatory period and beyond. To evaluate the acceptability of bentonite as a sealing material for the WIPP, this report identifies references that deal with the properties and characteristics of bentonite that may affect its behavior in the WIPP environment. This report reviews published studies that discuss using bentonite as sealing material for nuclear waste disposal, environmental restoration, toxic and chemical waste disposal, landfill liners, and applications in the petroleum industry. This report identifies the physical and chemical properties, stability and seal construction technologies of bentonite seals in shafts, especially in a saline brine environment. This report focuses on permeability, swelling pressure, strength, stiffness, longevity, and densification properties of bentonites.

  7. Magnetic nanofluids and magnetic composite fluids in rotating seal systems

    International Nuclear Information System (INIS)

    Borbath, T; Borbath, I; Boros, T; Bica, D; Vekas, L; Potencz, I

    2010-01-01

    Recent results are presented concerning the development of magnetofluidic leakage-free rotating seals for vacuum and high pressure gases, evidencing significant advantages compared to mechanical seals. The micro-pilot scale production of various types of magnetizable sealing fluids is shortly reviewed, in particular the main steps of the chemical synthesis of magnetic nanofluids and magnetic composite fluids with light hydrocarbon, mineral oil and synthetic oil carrier liquids. The behavior of different types of magnetizable fluids in the rotating sealing systems is analyzed. Design concepts, some constructive details and testing procedures of magnetofluidic rotating seals are presented such as the testing equipment. The main characteristics of several magnetofluidic sealing systems and their applications will be presented: vacuum deposition systems and liquefied gas pumps applications, mechanical and magnetic nanofluid combined seals, gas valves up to 40 bar equipped by rotating seal with magnetic nanofluids and magnetic composite fluids.

  8. Coping with heat: function of the natal coat of cape fur seal (Arctocephalus Pusillus Pusillus pups in maintaining core body temperature.

    Directory of Open Access Journals (Sweden)

    Nicola Erdsack

    Full Text Available Cape fur seal (Arctocephalus pusillus pups spend the first weeks of life exclusively or mainly ashore. They are exposed to intense solar radiation and high temperatures for long time periods, which results in temperatures up to at least 80°C on their black natal coat. To test the hypothesis that the natal coat has a crucial function in coping with these extreme conditions, we investigated the insulating properties of the natal coat in six captive newborn Cape fur seals during the first 50 days after birth. The natal fur differs from the adult fur not only in colour, but also in density, structure, and water repellence. We measured temperature on the fur surface and within the fur, as well as skin and rectal temperature under varying environmental conditions, comparable to the species' habitat. Experiments were designed to not influence the spontaneous behaviour of the pups. Rectal temperature was constant as long as the pups stayed dry, even during long-lasting intense solar radiation for up to 3 h. Skin temperature remained close to rectal temperature as long as the fur was dry, while with wet fur, skin temperature was significantly reduced as well. Our results show that the natal coat provides an effective insulation against overheating. The severely reduced insulation of wet natal fur against cold supports the assumption that the natal fur is an adaptation to the pups' terrestrial phase of life.

  9. Sensitivity analysis overlaps of friction elements in cartridge seals

    Directory of Open Access Journals (Sweden)

    Žmindák Milan

    2018-01-01

    Full Text Available Cartridge seals are self-contained units consisting of a shaft sleeve, seals, and gland plate. The applications of mechanical seals are numerous. The most common example of application is in bearing production for automobile industry. This paper deals with the sensitivity analysis of overlaps friction elements in cartridge seal and their influence on the friction torque sealing and compressive force. Furthermore, it describes materials for the manufacture of sealings, approaches usually used to solution of hyperelastic materials by FEM and short introduction into the topic wheel bearings. The practical part contains one of the approach for measurement friction torque, which results were used to specifying the methodology and precision of FEM calculation realized by software ANSYS WORKBENCH. This part also contains the sensitivity analysis of overlaps friction elements.

  10. Comment on 'Quantum string seal is insecure'

    International Nuclear Information System (INIS)

    He Guangping

    2007-01-01

    An attack strategy was recently proposed by Chau [Phys. Rev. A 75, 012327 (2007)], which was claimed to be able to break all quantum string seal protocols. Here it will be shown that the attack cannot obtain nontrivial information and escape the detection simultaneously in a class of quantum string seal, including the one proposed by He [Int. J. Quantum Inf. 4, 677 (2006)]. Thus it is insufficient to conclude that all quantum string seals are insecure

  11. A seal analyzer for testing container integrity

    International Nuclear Information System (INIS)

    McDaniel, P.; Jenkins, C.

    1988-01-01

    This paper reports on the development of laboratory and production seal analyzer that offers a rapid, nondestructive method of assuring the seal integrity of virtually any type of single or double sealed container. The system can test a broad range of metal cans, drums and trays, membrane-lidded vessels, flexible pouches, aerosol containers, and glass or metal containers with twist-top lids that are used in the chemical/pesticide (hazardous materials/waste), beverage, food, medical and pharmaceutical industries

  12. HMSRP Hawaiian Monk Seal Telemetry Tag Deployments

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project investigates foraging behavior of Hawaiian monk seals by conducting telemetry studies. During these studies, live seals are instrumented with dive...

  13. HMSRP Hawaiian Monk Seal Argos Location Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project investigates foraging behavior of Hawaiian monk seals by conducting telemetry studies. During these studies, live seals are instrumented with satellite...

  14. EXPERIMENTAL STUDY OF MAGNETIC FLUID SEAL

    Directory of Open Access Journals (Sweden)

    V. G. Bashtovoi

    2006-01-01

    Full Text Available Dependences of critical pressure drop, being held by magnetic fluid seal, on time in a static state and shaft rotation velocity in dynamics have been experimentally determined. The significant influence of particles’ redistribution in magnetic fluid on static parameters of magnetic fluid seal has been established.

  15. Straight cylindrical seal for high-performance turbomachines

    Science.gov (United States)

    Hendricks, Robert C.

    1987-01-01

    A straight cylindrical seal configuration representing the seal for a high-performance turbopump (e.g., the space shuttle main engine fuel pump) was tested under static (nonrotating) conditions. The test data included critical mass flux and pressure profiles over a wide range of inlet temperatures and pressures for fluid nitrogen and fluid hydrogen with the seal in concentric and fully eccentric positions. The critical mass fluxes (or leakage rates) for the concentric and fully eccentric configurations were nearly the same when based on stagnation conditions upstream of the seal. The fully eccentric configuration pressure profiles of the gas and liquid were different. Further, the pressure differences between the maximum and the minimum clearance positions were highly dependent on the geometric conditions, the temperature, and the absolute pressure at both the inlet and the exit. The pressure differences were greatest in the inlet region. The results, although complex, tend to follow the corresponding-states principles for critical flows. Gaseous injection near the seal exit plane significantly altered the pressure profiles and could be used to control turbomachine instabilities.

  16. Ejaculate traits in the Namibian cheetah (Acinonyx jubatus): influence of age, season and captivity.

    Science.gov (United States)

    Crosier, Adrienne E; Marker, Laurie; Howard, JoGayle; Pukazhenthi, Budhan S; Henghali, Josephine N; Wildt, David E

    2007-01-01

    The objective was to examine the influence of animal age, season and captivity status on seminal quality in wild-born cheetahs (Acinonyx jubatus) in Namibia, Africa. Animals were divided into three age categories: juvenile (14-24 months; n = 16 males, 23 ejaculates); adult (25-120 months; n = 76 males, 172 ejaculates); and aged (>120 months; n = 5 males, 5 ejaculates). Seasons were categorised into hot-wet (January-April), cold-dry (May-August) and hot-dry (September-December). A comparison between freshly wild-caught (n = 29 males, 41 ejaculates) and captive-held cheetahs (n = 68 males, 159 ejaculates) was also conducted. Raw ejaculates contained 69.0 +/- 1.1% motile spermatozoa (mean +/- s.e.m.) with 73.6 +/- 1.5% of these cells containing an intact acrosome. Overall, 18.4 +/- 0.9% of spermatozoa were morphologically normal, with midpiece anomalies being the most prevalent (approximately 39%) defect. Juvenile cheetahs produced ejaculates with poorer sperm motility, forward progressive status, lower seminal volume and fewer total motile spermatozoa than adult and aged animals. Spermatogenesis continued unabated throughout the year and was minimally influenced by season. Proportions of sperm malformations were also not affected by season. Ejaculates from captive cheetahs had increased volume and intact acrosomes, but lower sperm density than wild-caught counterparts. In summary, Namibian cheetahs produce an extraordinarily high proportion of pleiomorphic spermatozoa regardless of age, season or living (captive versus free-ranging) status. Young males less than 2 years of age produce poorer ejaculate quality than adult and aged males. Because (1) all study animals were wild born and (2) there was little difference between freshly caught males and those maintained in captivity for protracted periods, our results affirm that teratospermia in the cheetah is mostly genetically derived. It also appears that an ex situ environment for the Namibian cheetah can ensure sperm

  17. Haemangiosarcoma in a captive Asiatic lion ( Panthera leo persica ...

    African Journals Online (AJOL)

    A 2.7-year-old male captive Asiatic lion (Panthera leo persica) died unexpectedly without preceding symptoms. Gross necropsy revealed liver and lung tumours, which proved to be haemangiosarcomas by histopathology. Some of the liver tumours were ruptured, leading to massive intra-abdominal haemorrhage and death.

  18. Automated Image Acquisition System for the Verification of Copper-Brass Seal Images

    International Nuclear Information System (INIS)

    Stringa, E.; Bergonzi, C.; Littmann, F.; ); Marszalek, Y.; Tempesta, S.; )

    2015-01-01

    This paper describes a system for the verification of copper-brass seals realized by JRC according to DG ENER requirements. DG ENER processes about 20,000 metal seals per year. The verification of metal seals consists in visually checking the identity of a removed seal. The identity of a copper-brass seal is defined by a random stain pattern realized by the seal producer together with random scratches engraved when the seals are initialized ('seal production'). In order to verify that the seal returned from the field is the expected one its pattern is compared with an image taken during seal production. Formerly, seal initialization and verification were very heavy tasks as seal pictures were acquired with a camera one by one both in the initialization and verification stages. During the initialization the Nuclear Safeguards technicians had to place one by one new seals under a camera and acquire the related reference images. During the verification, the technician had to take used seals and place them one by one under a camera to take new pictures. The new images were presented to the technicians without any preprocessing and the technicians had to recognize the seal. The new station described in this paper has an automated image acquisition system allowing to easily process seals in batches of 100 seals. To simplify the verification, a software automatically centres and rotates the newly acquired seal image in order to perfectly overlap with the reference image acquired during the production phase. The new system significantly speeds up seal production and helps particularly with the demanding task of seal verification. As a large part of the seals is dealt with by a joint Euratom-IAEA team, the IAEA directly profits from this development. The new tool has been in routine use since mid 2013. (author)

  19. MWTF jumper connector integral seal block development and leak testing

    International Nuclear Information System (INIS)

    Ruff, E.S.; Jordan, S.R.

    1995-01-01

    In fiscal year 1993, tests of an o-ring/tetraseal retainer designed to replace a gasket-type seal used in PUREX-type process jumper connectors encouraged the design of an improved seal block. This new seal block combines several parts into one unitized component called an integral seal block. This report summarizes development and leak testing of the new integral seal block. The integral seal block uses a standard o-ring nested in a groove to accomplish leak tightness. This seal block eliminates the need to machine acme threads into the lower skirt casting and seal retainers, eliminates tolerance stack-up, reduces parts inventory, and eliminates an unnecessary leak path in the jumper connector assembly. This report also includes test data on various types of o-ring materials subjected to heat and pressure. Materials tested included Viton, Kalrez, and fluorosilicone, with some incidental data on teflon coated silicone o-rings. Test experience clearly demonstrates the need to test each seal material for temperature and pressure in its intended application. Some materials advertised as being open-quotes betterclose quotes at higher temperatures did not perform up to expectations. Inspection of the fluorosilicone and Kalrez seals after thermal testing indicates that they are much more susceptible to heat softening than Viton

  20. WIPP [Waste Isolation Pilot Plant] panel entryway seal: Numerical simulation of seal composite interaction for preliminary design evaluation

    International Nuclear Information System (INIS)

    Argueello, J.G.

    1988-04-01

    This report presents the results of a series of structural analyses performed to evaluate the structural interaction of the components of a potential two-component panel entryway seal configuration with each other and with the rock salt formation at the repository horizon of the Waste Isolation Pilot Plant. A two-dimensional axisymmetric geomechanical model is used to numerically simulate the interaction of the components of a 30.48 m (100 ft) long seal, consisting of concrete end caps and a crushed salt core, with each other and with the surrounding formation. Issues addressed in this report pertain to the consolidation of the crushed salt in terms of how much of the seal core reaches effective consolidation in the presence of the stiff concrete end caps since these could conceivably cause bridging (retardation of closure around the core) to occur. In addition, the stress field in the end caps is evaluated to determine if the concrete component maintains its integrity. The stresses induced in the surrounding formation are also evaluated to determine if the presence of the concrete component in the seal system results in a ''tightening'' of the formation around the seal. 20 refs., 43 figs., 2 tabs