Integrating neural network technology and noise analysis

International Nuclear Information System (INIS)

Uhrig, R.E.; Oak Ridge National Lab., TN

1995-01-01

The integrated use of neural network and noise analysis technologies offers advantages not available by the use of either technology alone. The application of neural network technology to noise analysis offers an opportunity to expand the scope of problems where noise analysis is useful and unique ways in which the integration of these technologies can be used productively. The two-sensor technique, in which the responses of two sensors to an unknown driving source are related, is used to demonstration such integration. The relationship between power spectral densities (PSDs) of accelerometer signals is derived theoretically using noise analysis to demonstrate its uniqueness. This relationship is modeled from experimental data using a neural network when the system is working properly, and the actual PSD of one sensor is compared with the PSD of that sensor predicted by the neural network using the PSD of the other sensor as an input. A significant deviation between the actual and predicted PSDs indicate that system is changing (i.e., failing). Experiments carried out on check values and bearings illustrate the usefulness of the methodology developed. (Author)

Cost-effectiveness Analysis for Technology Acquisition.

Science.gov (United States)

Chakravarty, A; Naware, S S

2008-01-01

In a developing country with limited resources, it is important to utilize the total cost visibility approach over the entire life-cycle of the technology and then analyse alternative options for acquiring technology. The present study analysed cost-effectiveness of an "In-house" magnetic resonance imaging (MRI) scan facility of a large service hospital against outsourcing possibilities. Cost per unit scan was calculated by operating costing method and break-even volume was calculated. Then life-cycle cost analysis was performed to enable total cost visibility of the MRI scan in both "In-house" and "outsourcing of facility" configuration. Finally, cost-effectiveness analysis was performed to identify the more acceptable decision option. Total cost for performing unit MRI scan was found to be Rs 3,875 for scans without contrast and Rs 4,129 with contrast. On life-cycle cost analysis, net present value (NPV) of the "In-house" configuration was found to be Rs-(4,09,06,265) while that of "outsourcing of facility" configuration was Rs-(5,70,23,315). Subsequently, cost-effectiveness analysis across eight Figures of Merit showed the "In-house" facility to be the more acceptable option for the system. Every decision for acquiring high-end technology must be subjected to life-cycle cost analysis.

Development of safety analysis technology for LMR

International Nuclear Information System (INIS)

Hahn, Do Hee; Kwon, Y. M.; Suk, S. D.

2002-05-01

In the present study, the KALIMER safety analysis has been made for the transients considered in the design concept, hypothetical core disruptive accident (HCDA), and containment performance with the establishment of the design basis. Such analyses have not been possible without the computer code improvement, and the experience attained during this research period must have greatly contributed to the achievement of the self reliance in the domestic technology establishment on the safety analysis areas of the conceptual design. The safety analysis codes have been improved to extend their applicable ranges for detailed conceptual design, and a basic computer code system has been established for HCDA analysis. A code-to-code comparison analysis has been performed as a part of code verification attempt, and the leading edge technology of JNC also has been brought for the technology upgrade. In addition, the research and development on the area of the database establishment has been made for the efficient and systematic project implementation of the conceptual design, through performances on the development of a project scheduling management, integration of the individually developed technology, establishment of the product database, and so on, taking into account coupling of the activities conducted in each specific area

Analysis technologies firewall

Directory of Open Access Journals (Sweden)

Б.Я. Корнієнко

2006-02-01

Full Text Available  With the purpose of research of properties and maintenance of protection of the information in telecommunication systems and information  systems is lead the comparative analysis of technologies of firewalls. Three basictechnologies of firewalls are considered: on the basis of popular free-of-charge sources of program maintenance, commercial program decisions and hardware-software decisions. Results of researches are presented in tables and conclusions.

DECISION ANALYSIS AND TECHNOLOGY ASSESSMENTS FOR METAL AND MASONRY DECONTAMINATION TECHNOLOGIES

International Nuclear Information System (INIS)

Ebadian, M.A.

1999-01-01

The purpose of this investigation was to conduct a comparative analysis of innovative technologies for the non-aggressive removal of coatings from metal and masonry surfaces and the aggressive removal of one-quarter to one-inch thickness of surface from structural masonry. The technologies tested should be capable of being used in nuclear facilities. Innovative decontamination technologies are being evaluated under standard, non-nuclear conditions at the FIU-HCET technology assessment site in Miami, Florida. This study is being performed to support the OST, the Deactivation and Decommissioning (D and D) Focus Area, and the environmental restoration of DOE facilities throughout the DOE complex by providing objective evaluations of currently available decontamination technologies

Systemization of Design and Analysis Technology for Advanced Reactor

International Nuclear Information System (INIS)

Kim, Keung Koo; Lee, J.; Zee, S. K.

2009-01-01

The present study is performed to establish the base for the license application of the original technology by systemization and enhancement of the technology that is indispensable for the design and analysis of the advanced reactors including integral reactors. Technical reports and topical reports are prepared for this purpose on some important design/analysis methodology; design and analysis computer programs, structural integrity evaluation of main components and structures, digital I and C systems and man-machine interface design. PPS design concept is complemented reflecting typical safety analysis results. And test plans and requirements are developed for the verification of the advanced reactor technology. Moreover, studies are performed to draw up plans to apply to current or advanced power reactors the original technologies or base technologies such as patents, computer programs, test results, design concepts of the systems and components of the advanced reactors. Finally, pending issues are studied of the advanced reactors to improve the economics and technology realization

Nuclear Proliferation Technology Trends Analysis

Energy Technology Data Exchange (ETDEWEB)

Zentner, Michael D.; Coles, Garill A.; Talbert, Robert J.

2005-10-04

A process is underway to develop mature, integrated methodologies to address nonproliferation issues. A variety of methodologies (both qualitative and quantitative) are being considered. All have one thing in common, a need for a consistent set of proliferation related data that can be used as a basis for application. One approach to providing a basis for predicting and evaluating future proliferation events is to understand past proliferation events, that is, the different paths that have actually been taken to acquire or attempt to acquire special nuclear material. In order to provide this information, this report describing previous material acquisition activities (obtained from open source material) has been prepared. This report describes how, based on an evaluation of historical trends in nuclear technology development, conclusions can be reached concerning: (1) The length of time it takes to acquire a technology; (2) The length of time it takes for production of special nuclear material to begin; and (3) The type of approaches taken for acquiring the technology. In addition to examining time constants, the report is intended to provide information that could be used to support the use of the different non-proliferation analysis methodologies. Accordingly, each section includes: (1) Technology description; (2) Technology origin; (3) Basic theory; (4) Important components/materials; (5) Technology development; (6) Technological difficulties involved in use; (7) Changes/improvements in technology; (8) Countries that have used/attempted to use the technology; (9) Technology Information; (10) Acquisition approaches; (11) Time constants for technology development; and (12) Required Concurrent Technologies.

Strategic Analysis of Technology Integration at Allstream

OpenAIRE

Brown, Jeff

2011-01-01

Innovation has been defined as the combination of invention and commercialization. Invention without commercialization is rarely, if ever, profitable. For the purposes of this paper the definition of innovation will be further expanded into the concept of technology integration. Successful technology integration not only includes new technology introduction, but also the operationalization of the new technology within each business unit of the enterprise. This paper conducts an analysis of Al...

Analysis of technological, institutional and socioeconomic factors ...

African Journals Online (AJOL)

Analysis of technological, institutional and socioeconomic factors that influences poor reading culture among secondary school students in Nigeria. ... Proliferation and availability of smart phones, chatting culture and social media were identified as technological factors influencing poor reading culture among secondary ...

Seal analysis technology for reactor pressure vessel

International Nuclear Information System (INIS)

Zheng Liangang; Zhang Liping; Yang Yu; Zang Fenggang

2009-01-01

There is the coolant with radiation, high temperature and high pressure in the reactor pressure vessel (RPV). It is closely correlated to RPV sealing capability whether the whole nuclear system work well or not. The aim of this paper is to study the seal analysis method and technology, such as the pre-tensioning of the bolt, elastoplastic contact and coupled technology of thermal and structure. The 3 D elastoplastic seal analysis method really and generally consider the loads and model the contact problem with friction between the contact plates. This method is easier than the specialized seal program and used widely. And it is more really than the 2 D seal analysis method. This 3 D elastoplastic seal analysis method has been successfully used in the design and analysis of RPV. (authors)

Exploring health information technology education: an analysis of the research.

Science.gov (United States)

Virgona, Thomas

2012-01-01

This article is an analysis of the Health Information Technology Education published research. The purpose of this study was to examine selected literature using variables such as journal frequency, keyword analysis, universities associated with the research and geographic diversity. The analysis presented in this paper has identified intellectually significant studies that have contributed to the development and accumulation of intellectual wealth of Health Information Technology. The keyword analysis suggests that Health Information Technology research has evolved from establishing concepts and domains of health information systems, technology and management to contemporary issues such as education, outsourcing, web services and security. The research findings have implications for educators, researchers, journal.

Value analysis for advanced technology products

Science.gov (United States)

Soulliere, Mark

2011-03-01

Technology by itself can be wondrous, but buyers of technology factor in the price they have to pay along with performance in their decisions. As a result, the ``best'' technology may not always win in the marketplace when ``good enough'' can be had at a lower price. Technology vendors often set pricing by ``cost plus margin,'' or by competitors' offerings. What if the product is new (or has yet to be invented)? Value pricing is a methodology to price products based on the value generated (e.g. money saved) by using one product vs. the next best technical alternative. Value analysis can often clarify what product attributes generate the most value. It can also assist in identifying market forces outside of the control of the technology vendor that also influence pricing. These principles are illustrated with examples.

Advanced Technology Lifecycle Analysis System (ATLAS)

Science.gov (United States)

O'Neil, Daniel A.; Mankins, John C.

2004-01-01

Developing credible mass and cost estimates for space exploration and development architectures require multidisciplinary analysis based on physics calculations, and parametric estimates derived from historical systems. Within the National Aeronautics and Space Administration (NASA), concurrent engineering environment (CEE) activities integrate discipline oriented analysis tools through a computer network and accumulate the results of a multidisciplinary analysis team via a centralized database or spreadsheet Each minute of a design and analysis study within a concurrent engineering environment is expensive due the size of the team and supporting equipment The Advanced Technology Lifecycle Analysis System (ATLAS) reduces the cost of architecture analysis by capturing the knowledge of discipline experts into system oriented spreadsheet models. A framework with a user interface presents a library of system models to an architecture analyst. The analyst selects models of launchers, in-space transportation systems, and excursion vehicles, as well as space and surface infrastructure such as propellant depots, habitats, and solar power satellites. After assembling the architecture from the selected models, the analyst can create a campaign comprised of missions spanning several years. The ATLAS controller passes analyst specified parameters to the models and data among the models. An integrator workbook calls a history based parametric analysis cost model to determine the costs. Also, the integrator estimates the flight rates, launched masses, and architecture benefits over the years of the campaign. An accumulator workbook presents the analytical results in a series of bar graphs. In no way does ATLAS compete with a CEE; instead, ATLAS complements a CEE by ensuring that the time of the experts is well spent Using ATLAS, an architecture analyst can perform technology sensitivity analysis, study many scenarios, and see the impact of design decisions. When the analyst is

Health Monitoring System Technology Assessments: Cost Benefits Analysis

Science.gov (United States)

Kent, Renee M.; Murphy, Dennis A.

2000-01-01

The subject of sensor-based structural health monitoring is very diverse and encompasses a wide range of activities including initiatives and innovations involving the development of advanced sensor, signal processing, data analysis, and actuation and control technologies. In addition, it embraces the consideration of the availability of low-cost, high-quality contributing technologies, computational utilities, and hardware and software resources that enable the operational realization of robust health monitoring technologies. This report presents a detailed analysis of the cost benefit and other logistics and operational considerations associated with the implementation and utilization of sensor-based technologies for use in aerospace structure health monitoring. The scope of this volume is to assess the economic impact, from an end-user perspective, implementation health monitoring technologies on three structures. It specifically focuses on evaluating the impact on maintaining and supporting these structures with and without health monitoring capability.

Analysis of technologies databases use in physical education and sport

OpenAIRE

Usychenko V.V.; Byshevets N.G.

2010-01-01

Analysis and systematization is conducted scientific methodical and the special literature. The questions of the use of technology of databases rise in the system of preparation of sportsmen. The necessity of application of technologies of operative treatment of large arrays of sporting information is rotined. Collected taking on the use of computer-aided technologies of account and analysis of results of testing of parameters of training process. The question of influence of technologies is ...

Social and ethical analysis in health technology assessment.

Science.gov (United States)

Tantivess, Sripen

2014-05-01

This paper presents a review of the domestic and international literature on the assessment of the social and ethical implications of health technologies. It gives an overview of the key concepts, principles, and approaches that should be taken into account when conducting a social and ethical analysis within health technology assessment (HTA). Although there is growing consensus among healthcare experts that the social and ethical ramifications of a given technology should be examined before its adoption, the demand for this kind of analysis among policy-makers around the world, including in Thailand, has so far been lacking. Currently decision-makers mainly base technology adoption decisions using evidence on clinical effectiveness, value for money, and budget impact, while social and ethical aspects have been neglected. Despite the recognized importance of considering equity, justice, and social issues when making decisions regarding health resource allocation, the absence of internationally-accepted principles and methodologies, among other factors, hinders research in these areas. Given that developing internationally agreed standards takes time, it has been recommended that priority be given to defining processes that are justifiable, transparent, and contestable. A discussion of the current situation in Thailand concerning social and ethical analysis of health technologies is also presented.

Second NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

Science.gov (United States)

ONeil, D. A.; Mankins, J. C.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The Advanced Technology Lifecycle Analysis System (ATLAS), a spreadsheet analysis tool suite, applies parametric equations for sizing and lifecycle cost estimation. Performance, operation, and programmatic data used by the equations come from a Technology Tool Box (TTB) database. In this second TTB Technical Interchange Meeting (TIM), technologists, system model developers, and architecture analysts discussed methods for modeling technology decisions in spreadsheet models, identified specific technology parameters, and defined detailed development requirements. This Conference Publication captures the consensus of the discussions and provides narrative explanations of the tool suite, the database, and applications of ATLAS within NASA s changing environment.

Strategic Mobility 21 Joint Sea Based Logistics

National Research Council Canada - National Science Library

Mallon, Lawrence G

2008-01-01

.... Conceptually the SM21 JDDSP would support sea-based logistics through the use of advanced distribution information management systems and the management of sustainment buffer stocks at strategic...

Digital Printing Quality Detection and Analysis Technology Based on CCD

Science.gov (United States)

He, Ming; Zheng, Liping

2017-12-01

With the help of CCD digital printing quality detection and analysis technology, it can carry out rapid evaluation and objective detection of printing quality, and can play a certain control effect on printing quality. It can be said CDD digital printing quality testing and analysis of the rational application of technology, its digital printing and printing materials for a variety of printing equipments to improve the quality of a very positive role. In this paper, we do an in-depth study and discussion based on the CCD digital print quality testing and analysis technology.

Discuss on luminescence dose data analysis technology

International Nuclear Information System (INIS)

Ma Xinhua; Xiao Wuyun; Ai Xianyun; Shi Zhilan; Liu Ying

2009-01-01

This article describes the development of luminescence dose data measurement and processing technology. General design planning of luminescence dose data measurement and processing technology is put forward with the diverse demands. The emphasis is focused on dose data processing method, luminescence curve analysis method, using of network, mechanics of communication among computers, data base management system of individual dose in this paper. The main methods and skills used in this technology as well as their advantages are also discussed. And it offers general design references for development luminescence dose data processing software. (authors)

Advanced nuclear energy analysis technology

International Nuclear Information System (INIS)

Gauntt, Randall O.; Murata, Kenneth K.; Romero, Vicente Josce; Young, Michael Francis; Rochau, Gary Eugene

2004-01-01

A two-year effort focused on applying ASCI technology developed for the analysis of weapons systems to the state-of-the-art accident analysis of a nuclear reactor system was proposed. The Sandia SIERRA parallel computing platform for ASCI codes includes high-fidelity thermal, fluids, and structural codes whose coupling through SIERRA can be specifically tailored to the particular problem at hand to analyze complex multiphysics problems. Presently, however, the suite lacks several physics modules unique to the analysis of nuclear reactors. The NRC MELCOR code, not presently part of SIERRA, was developed to analyze severe accidents in present-technology reactor systems. We attempted to: (1) evaluate the SIERRA code suite for its current applicability to the analysis of next generation nuclear reactors, and the feasibility of implementing MELCOR models into the SIERRA suite, (2) examine the possibility of augmenting ASCI codes or alternatives by coupling to the MELCOR code, or portions thereof, to address physics particular to nuclear reactor issues, especially those facing next generation reactor designs, and (3) apply the coupled code set to a demonstration problem involving a nuclear reactor system. We were successful in completing the first two in sufficient detail to determine that an extensive demonstration problem was not feasible at this time. In the future, completion of this research would demonstrate the feasibility of performing high fidelity and rapid analyses of safety and design issues needed to support the development of next generation power reactor systems

Target objectives in Spanish Marine Science within the European context (2003-2007

Directory of Open Access Journals (Sweden)

Beatriz Morales-Nin

2009-03-01

Full Text Available The analysis of the marine projects funded by the Spanish RTD funding agency between 2003 and 2007 in the framework of the European policies, showed that although the funds available have increased (232 projects and 33 Million € from 2003 to 2007 there are still research and strategic areas that are not covered. The relevance of marine related services and economic revenues for Spain requires that a strategy is developed to address the challenges that are emerging due to the growing competing uses of the sea, which include maritime transport, fishing, aquaculture, leisure activities, off-shore energy production and other forms of seabed exploitation. By helping to develop a more sophisticated understanding of the impact of human activities on marine systems, scientific research and technology may provide the key to carrying out sea-based activities without degrading the environment, and to predicting and mitigating as far as possible the effects of climate change.

Grazing-incident PIXE Analysis Technology

International Nuclear Information System (INIS)

Li Hongri; Wang Guangpu; Liang Kun; Yang Ru; Han Dejun

2009-01-01

In the article, the grazing incidence technology is first applied to the PIXE (proton induced X-ray emission) analysis. Three pieces of samples were investigated, including the contaminated aluminium substrate, the SIMOX (separated by oxygen implantation) SOI (Silicon on Insulator) sample and the silicon wafer implanted with Fe + . The results reveal that the grazing-incident proton can improve the sensitivity of PIXE in trace analysis, especially for samples contaminated on surface. With the penetration depth of the proton bean decreased, the ratio of the peak area to the detection limit raised observably and the sensitivity near the sample surface increased. (authors)

A Survivability Assessment of the Transformable Craft in an Operational Environment

Science.gov (United States)

2010-06-01

Robert F. Dell Chairman, Department of Operations Research iv THIS PAGE INTENTIONALLY LEFT BLANK v ABSTRACT Seabasing is developing as a dominant...Scenario..................................................................43 b. Malaysia Scenario...52 b. Malaysia Scenario...................................................................58

Nuclear Fuel Cycle Analysis Technology to Develop Advanced Nuclear Fuel Cycle

Energy Technology Data Exchange (ETDEWEB)

Park, Byung Heung [Chungju National University, Chungju (Korea, Republic of); Ko, Won IL [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2011-12-15

The nuclear fuel cycle (NFC) analysis is a study to set a NFC policy and to promote systematic researches by analyzing technologies and deriving requirements at each stage of a fuel cycle. System analysis techniques are utilized for comparative analysis and assessment of options on a considered system. In case that NFC is taken into consideration various methods of the system analysis techniques could be applied depending on the range of an interest. This study presented NFC analysis strategies for the development of a domestic advanced NFC and analysis techniques applicable to different phases of the analysis. Strategically, NFC analysis necessitates the linkage with technology analyses, domestic and international interests, and a national energy program. In this respect, a trade-off study is readily applicable since it includes various aspects on NFC as metrics and then analyzes the considered NFC options according to the derived metrics. In this study, the trade-off study was identified as a method for NFC analysis with the derived strategies and it was expected to be used for development of an advanced NFC. A technology readiness level (TRL) method and NFC simulation codes could be utilized to obtain the required metrics and data for assessment in the trade-off study. The methodologies would guide a direction of technology development by comparing and assessing technological, economical, environmental, and other aspects on the alternatives. Consequently, they would contribute for systematic development and deployment of an appropriate advanced NFC.

Nuclear Fuel Cycle Analysis Technology to Develop Advanced Nuclear Fuel Cycle

International Nuclear Information System (INIS)

Park, Byung Heung; Ko, Won IL

2011-01-01

The nuclear fuel cycle (NFC) analysis is a study to set a NFC policy and to promote systematic researches by analyzing technologies and deriving requirements at each stage of a fuel cycle. System analysis techniques are utilized for comparative analysis and assessment of options on a considered system. In case that NFC is taken into consideration various methods of the system analysis techniques could be applied depending on the range of an interest. This study presented NFC analysis strategies for the development of a domestic advanced NFC and analysis techniques applicable to different phases of the analysis. Strategically, NFC analysis necessitates the linkage with technology analyses, domestic and international interests, and a national energy program. In this respect, a trade-off study is readily applicable since it includes various aspects on NFC as metrics and then analyzes the considered NFC options according to the derived metrics. In this study, the trade-off study was identified as a method for NFC analysis with the derived strategies and it was expected to be used for development of an advanced NFC. A technology readiness level (TRL) method and NFC simulation codes could be utilized to obtain the required metrics and data for assessment in the trade-off study. The methodologies would guide a direction of technology development by comparing and assessing technological, economical, environmental, and other aspects on the alternatives. Consequently, they would contribute for systematic development and deployment of an appropriate advanced NFC.

Analysis of technologies databases use in physical education and sport

Directory of Open Access Journals (Sweden)

Usychenko V.V.

2010-03-01

Full Text Available Analysis and systematization is conducted scientific methodical and the special literature. The questions of the use of technology of databases rise in the system of preparation of sportsmen. The necessity of application of technologies of operative treatment of large arrays of sporting information is rotined. Collected taking on the use of computer-aided technologies of account and analysis of results of testing of parameters of training process. The question of influence of technologies is considered on training and competition activity. A database is presented «Athlete». A base contains anthropometric and myometrical indexes of sportsmen of bodybuilding of high qualification.

Green Curriculum Analysis in Technological Education

Science.gov (United States)

Chakraborty, Arpita; Singh, Manvendra Pratap; Roy, Mousumi

2018-01-01

With rapid industrialization and technological development, India is facing adverse affects of unsustainable pattern of production and consumption. Education for sustainable development has been widely recognized to reduce the threat of environmental degradation and resource depletion. This paper used the content analysis method to explore the…

The value function as a criterion of analysis in separation technologies

International Nuclear Information System (INIS)

Peculea, Marius

2005-01-01

Production costs of heavy water are described by two functions: φ(ε), the energy function which represents the variable costs and φ(τ), the technologic function which represents the stable costs. The Dirac value function related to the circulation in the separation cascade allows calculating φ(ε) and consequently the technologic function may be represented in relation to the specific separation process. This representation allows the qualitative analysis of different separation processes or, for a given process, provides the analysis of different technological solutions which were worked out. An example is given referring to the analysis of heavy water technologies of separation through the dual temperature process of H 2 O-H 2 S isotopic exchange

SILICATE TECHNOLOGY CORPORATION'S SOLIDIFICATION/ STABILIZATION TECHNOLOGY FOR ORGANIC AND INORGANIC CONTAMINANTS IN SOILS - APPLICATIONS ANALYSIS REPORT

Science.gov (United States)

This Applications Analysis Report evaluates the solidification/stabilization treatment process of Silicate Technology Corporation (STC) for the on-site treatment of hazardous waste. The STC immobilization technology utilizes a proprietary product (FMS Silicate) to chemically stab...

The investigation of nano-monitoring technology and the probability analysis of application of nuclear technology

International Nuclear Information System (INIS)

Kang Kejun; Wang Xuewu; Gao Wenhuan

1999-01-01

After several-decade of development, nano science/nano technology has become a scientific and technical frontier that with major trends foreseen in several disciplines. By connecting with the development of nano science/nano technology and considering the human body environment that the nano system is applicable in, the author analyzes the probability of the present nuclear detection technologies integrating and application with the monitoring of nano system, and draws an analysis of optimality choice

The process system analysis for advanced spent fuel management technology (I)

International Nuclear Information System (INIS)

Lee, H. H.; Lee, J. R.; Kang, D. S.; Seo, C. S.; Shin, Y. J.; Park, S. W.

1997-12-01

Various pyrochemical processes were evaluated, and viable options were selected in consideration of the proliferation safety, technological feasibility and compatibility to the domestic nuclear power system. Detailed technical analysis were followed on the selected options such as unit process flowsheet including physico-chemical characteristics of the process systems, preliminary concept development, process design criteria and materials for equipment. Supplementary analysis were also carried out on the support technologies including sampling and transport technologies of molten salt, design criteria and equipment for glove box systems, and remote operation technologies. (author). 40 refs., 49 tabs., 37 figs

Decision Analysis System for Selection of Appropriate Decontamination Technologies

International Nuclear Information System (INIS)

Ebadian, M.A.; Boudreaux, J.F.; Chinta, S.; Zanakis, S.H.

1998-01-01

The principal objective for designing Decision Analysis System for Decontamination (DASD) is to support DOE-EM's endeavor to employ the most efficient and effective technologies for treating radiologically contaminated surfaces while minimizing personnel and environmental risks. DASD will provide a tool for environmental decision makers to improve the quality, consistency, and efficacy of their technology selection decisions. The system will facilitate methodical comparisons between innovative and baseline decontamination technologies and aid in identifying the most suitable technologies for performing surface decontamination at DOE environmental restoration sites

A Network Analysis Model for Selecting Sustainable Technology

Directory of Open Access Journals (Sweden)

Sangsung Park

2015-09-01

Full Text Available Most companies develop technologies to improve their competitiveness in the marketplace. Typically, they then patent these technologies around the world in order to protect their intellectual property. Other companies may use patented technologies to develop new products, but must pay royalties to the patent holders or owners. Should they fail to do so, this can result in legal disputes in the form of patent infringement actions between companies. To avoid such situations, companies attempt to research and develop necessary technologies before their competitors do so. An important part of this process is analyzing existing patent documents in order to identify emerging technologies. In such analyses, extracting sustainable technology from patent data is important, because sustainable technology drives technological competition among companies and, thus, the development of new technologies. In addition, selecting sustainable technologies makes it possible to plan their R&D (research and development efficiently. In this study, we propose a network model that can be used to select the sustainable technology from patent documents, based on the centrality and degree of a social network analysis. To verify the performance of the proposed model, we carry out a case study using actual patent data from patent databases.

Spatial analysis of digital technologies and impact on socio - cultural ...

African Journals Online (AJOL)

The objective of this study was to determine the spatial distribution of digital technologies and ascertain whether digital technologies have significant impact on socio - cultural values or not. Moran's index and Getis and Ord's statistic were used for cluster and hotspots analysis. The unique locations of digital technologies ...

Ethical analysis to improve decision-making on health technologies

DEFF Research Database (Denmark)

Saarni, Samuli I; Hofmann, Bjørn; Lampe, Kristian

2008-01-01

Health technology assessment (HTA) is the multidisciplinary study of the implications of the development, diffusion and use of health technologies. It supports health-policy decisions by providing a joint knowledge base for decision-makers. To increase its policy relevance, HTA tries to extend...... beyond effectiveness and costs to also considering the social, organizational and ethical implications of technologies. However, a commonly accepted method for analysing the ethical aspects of health technologies is lacking. This paper describes a model for ethical analysis of health technology...... to only analyse the ethical consequences of a technology, but also the ethical issues of the whole HTA process must be considered. Selection of assessment topics, methods and outcomes is essentially a value-laden decision. Health technologies may challenge moral or cultural values and beliefs...

NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box

Science.gov (United States)

ONeil, D. A.; Craig, D. A.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The objective of this Technical Interchange Meeting was to increase the quantity and quality of technical, cost, and programmatic data used to model the impact of investing in different technologies. The focus of this meeting was the Technology Tool Box (TTB), a database of performance, operations, and programmatic parameters provided by technologists and used by systems engineers. The TTB is the data repository used by a system of models known as the Advanced Technology Lifecycle Analysis System (ATLAS). This report describes the result of the November meeting, and also provides background information on ATLAS and the TTB.

A cross-case analysis of technology-in-use practices

DEFF Research Database (Denmark)

Boulus, Nina; Bjørn, Pernille

2010-01-01

Purpose: To identify and characterize enabling factors that support a continuous adaptation of technology and work practices in the health care sector. Methods: Cross-case analysis of two longitudinal ethnographic studies of managing the gradual adaptation of electronic patient records, one...... in Canada and one Norway. Results: The cross-case analysis revealed that technology-in-use practices developed more rapidly in one of the cases, and one of the major driving forces was the establishment of a special committee and the associated project meetings. Based on the literature and grounded...... in the empirical observations, we complement and expand the notion of project meetings as composed of continuous reflection-on-practice activities to construct technology-in-use practices. Conclusion: We characterize reflection-on-practice activities as frequent encounters of negotiations of work practices...

Education for sustainable development in technology education in Irish schools: a curriculum analysis

OpenAIRE

McGarr, Oliver

2010-01-01

peer-reviewed This paper explores the integration of Education for Sustainable Development (ESD) in technology education and the extent to which it is currently addressed in curriculum documents and state examinations in technology education at post-primary level in Ireland. This analysis is conducted amidst the backdrop of considerable change in technology education at post-primary level. The analysis of the provision of technology education found, that among the range of technology relat...

Floating marine debris in fjords, gulfs and channels of southern Chile.

Science.gov (United States)

Hinojosa, Iván A; Thiel, Martin

2009-08-01

Floating marine debris (FMD) is reported from all oceans. The bulk of FMD are plastics, which due to their longevity cause multiple negative impacts on wildlife and environment. Identifying the origins of FMD (land- or sea-based) is important to take the necessary steps to diminish their abundance. Using ship surveys we examined the abundance, composition and distribution of FMD during the years 2002-2005 in the fjords, gulfs and channels of southern Chile. Abundances of FMD were relatively high compared with other studies, ranging from 1 to 250 items km(-2). The majority (approximately 80%) of FMD was composed of styrofoam (expanded polystyrene), plastic bags and plastic fragments. Styrofoam, which is intensively used as flotation device by mussel farms, was very abundant in the northern region but rarely occurred in the southern region of the study area. Food sacks from salmon farms were also most common in the northern region, where approximately 85% of the total Chilean mussel and salmon harvest is produced. Plastic bags, which could be from land- or sea-based sources, were found throughout the entire study area. Our results indicate that sea-based activities (mussel farming and salmon aquaculture) are responsible for most FMD in the study area. In order to reduce FMDs in the environment, in addition to stronger legislation and identification of potential sources, we suggest environmental education programs and we encourage public participation (e.g. in beach surveys and clean-ups).

Automated Technology for Verificiation and Analysis

DEFF Research Database (Denmark)

-of-the-art research on theoretical and practical aspects of automated analysis, verification, and synthesis. Among 74 research papers and 10 tool papers submitted to ATVA 2009, the Program Committee accepted 23 as regular papers and 3 as tool papers. In all, 33 experts from 17 countries worked hard to make sure......This volume contains the papers presented at the 7th International Symposium on Automated Technology for Verification and Analysis held during October 13-16 in Macao SAR, China. The primary objective of the ATVA conferences remains the same: to exchange and promote the latest advances of state...

Climate mitigation under an uncertain technology future: A TIAM-World analysis

International Nuclear Information System (INIS)

Labriet, Maryse; Kanudia, Amit; Loulou, Richard

2012-01-01

This paper explores the impacts of long-term technology and climate uncertainties on the optimal evolution of the World energy system. Stochastic programming with the TIAM-World model is used for a parametric analysis of hedging strategies, varying the probabilities associated to each of two contrasted technology outlooks. The parametric analysis constitutes an original supplement to the computation of hedging strategies by identifying technologies that are robust under a broad range of probabilities of the two technology outlooks. Natural gas appears to be one of the most appealing robust options in an uncertain technological context, especially in China, given its relatively low emissions and the low capital cost of associated technologies. Natural gas and some other options are in fact considered as “super-hedging” actions, penetrating more in the hedging solution than in any of the deterministic scenarios. Nuclear power and CCS use are less robust: they depend much more on either the level of the climate target or the probabilities of the technology outlooks. The analysis also shows that technological uncertainty has a greater impact under milder climate targets than under more severe ones. Future research might consider a larger set of possible technology outlooks, as well as specific analyses focused on key characteristics of low-carbon technologies. - Highlights: ► The hedging strategy is not an average of deterministic strategies. ► The hedging offers a mix of abatement actions that cannot easily be found otherwise. ► Natural gas is an appealing choice in an uncertain context, especially in China. ► China reduces its emissions only when options in other countries are exhausted.

A Technology-Organization-Environment Perspective on Eco-effectiveness: A Meta-analysis

Directory of Open Access Journals (Sweden)

Josephine LL Chong

2017-03-01

Full Text Available In this research, we perform a meta-analysis to explain how organizations are deploying technologies to enforce organizational sustainability by meeting the goal of eco-effectiveness. Prior studies have studied the influences on the adoption of technologies using the Technology-Organisation-Environment (TOE model that incorporate some aspects of technological, organizational or environmental factors. We collected prior research to test the factors of the TOE model to ascertain their relative impact and strength. Our meta-analysis found eight additional technological and organizational factors. We found strong support for IT infrastructure, perceived direct benefits, top management support, and competitive pressure. Moderate support for compatibility, technological readiness, perceived indirect benefits, knowledge (human resources, organizational size, attitudes towards innovation, learning culture, pressure from trade partners (industry characteristics and regulatory support. Lastly, weak support was found for relative advantage, complexity, perceived risks and information learning culture. Only two dimensions, financial resources and environmental uncertainty failed to reach statistical significance.

A Maturity Analysis of Big Data Technologies

Directory of Open Access Journals (Sweden)

Radu BONCEA

2017-01-01

Full Text Available In recent years Big Data technologies have been developed at faster pace due to increase in demand from applications that generate and process vast amount of data. The Cloud Computing and the Internet of Things are the main drivers for developing enterprise solutions that support Business Intelligence which in turn, creates new opportunities and new business models. An enterprise can now collect data about its internal processes, process this data to gain new insights and business value and make better decisions. And this is the reason why Big Data is now seen as a vital component in any enterprise architecture. In this article the maturity of several Big Data technologies is put under analysis. For each technology there are several aspects considered, such as development status, market usage, licensing policies, availability for certifications, adoption, support for cloud computing and enterprise.

Sustainable Technology Analysis of Artificial Intelligence Using Bayesian and Social Network Models

Directory of Open Access Journals (Sweden)

Juhwan Kim

2018-01-01

Full Text Available Recent developments in artificial intelligence (AI have led to a significant increase in the use of AI technologies. Many experts are researching and developing AI technologies in their respective fields, often submitting papers and patent applications as a result. In particular, owing to the characteristics of the patent system that is used to protect the exclusive rights to registered technology, patent documents contain detailed information on the developed technology. Therefore, in this study, we propose a statistical method for analyzing patent data on AI technology to improve our understanding of sustainable technology in the field of AI. We collect patent documents that are related to AI technology, and then analyze the patent data to identify sustainable AI technology. In our analysis, we develop a statistical method that combines social network analysis and Bayesian modeling. Based on the results of the proposed method, we provide a technological structure that can be applied to understand the sustainability of AI technology. To show how the proposed method can be applied to a practical problem, we apply the technological structure to a case study in order to analyze sustainable AI technology.

Engineering, Analysis and Technology FY 1995 Site Support Program Plan

International Nuclear Information System (INIS)

Suyama, R.M.

1994-09-01

The vision of the Engineering, Analysis and Technology organization is to be recognized as the cost-effective supplier of specialized, integrated, multi-disciplined engineering teams to support Hanford missions. The mission of the Engineering, Analysis and Technology organization is to provide centralized engineering services. These services are focused on supplying technical design, analytical engineering and related support services that support Hanford's environmental restoration mission. These services include engineering analysis, design and development of systems and engineered equipment, supplying multi-disciplined engineering teams to all Hanford programs and project organizations, engineering document release, and site-wide leadership in the development and implementation of engineering standards, engineering practices, and configuration management processes

Development of safety analysis technology for LMR

International Nuclear Information System (INIS)

Lee, Y. B.; Kwon, Y. M.; Suk, S. D.

2005-03-01

The MATRA-LMR-FB has been developed internally for the damage prevention as well as the safety assessment during a channel blockage accident and, as a the result, the quality of the code becomes comparable to that developed in the leading countries. For a code-to-code comparison, KAERI could have access to the SASSYS-1 through a bilateral collaboration between KAERI and ANL. The study could bring into the reliability improvements both on the reactivity models in the SSC-K and on the SSC-K prediction capability. It finally leads to the completion of the SSC-K version 1.3 resulting from the qualitative and quantitative code-to-code comparison. The preliminary analysis for a metal fueled LMR could also become possible with the MELT-III and the VENUS-II, which had originally been developed for the HCDA analysis with an oxidized fuel, by developing the relevant models For the development of the safety evaluation technology, the safety limits have been set up, and the analyses of the internal and external channel blockages in an assembly have also been performed. Besides, the more reliable analysis results on the key design concepts could be obtained by way of the methodology improvement resulting from the qualitative and quantitative comparison study. For an efficient and systematic control of the main project, the integration of the developed technologies and the establishment of their data base have been pursued. It has gone through the development of the process control with taking account of interfaces among the sub-projects, the overall coordination of the developed technologies, the data base for the design products, and so on

Ultra Wideband Indoor Positioning Technologies: Analysis and Recent Advances.

Science.gov (United States)

Alarifi, Abdulrahman; Al-Salman, AbdulMalik; Alsaleh, Mansour; Alnafessah, Ahmad; Al-Hadhrami, Suheer; Al-Ammar, Mai A; Al-Khalifa, Hend S

2016-05-16

In recent years, indoor positioning has emerged as a critical function in many end-user applications; including military, civilian, disaster relief and peacekeeping missions. In comparison with outdoor environments, sensing location information in indoor environments requires a higher precision and is a more challenging task in part because various objects reflect and disperse signals. Ultra WideBand (UWB) is an emerging technology in the field of indoor positioning that has shown better performance compared to others. In order to set the stage for this work, we provide a survey of the state-of-the-art technologies in indoor positioning, followed by a detailed comparative analysis of UWB positioning technologies. We also provide an analysis of strengths, weaknesses, opportunities, and threats (SWOT) to analyze the present state of UWB positioning technologies. While SWOT is not a quantitative approach, it helps in assessing the real status and in revealing the potential of UWB positioning to effectively address the indoor positioning problem. Unlike previous studies, this paper presents new taxonomies, reviews some major recent advances, and argues for further exploration by the research community of this challenging problem space.

Ultra Wideband Indoor Positioning Technologies: Analysis and Recent Advances

Directory of Open Access Journals (Sweden)

Abdulrahman Alarifi

2016-05-01

Full Text Available In recent years, indoor positioning has emerged as a critical function in many end-user applications; including military, civilian, disaster relief and peacekeeping missions. In comparison with outdoor environments, sensing location information in indoor environments requires a higher precision and is a more challenging task in part because various objects reflect and disperse signals. Ultra WideBand (UWB is an emerging technology in the field of indoor positioning that has shown better performance compared to others. In order to set the stage for this work, we provide a survey of the state-of-the-art technologies in indoor positioning, followed by a detailed comparative analysis of UWB positioning technologies. We also provide an analysis of strengths, weaknesses, opportunities, and threats (SWOT to analyze the present state of UWB positioning technologies. While SWOT is not a quantitative approach, it helps in assessing the real status and in revealing the potential of UWB positioning to effectively address the indoor positioning problem. Unlike previous studies, this paper presents new taxonomies, reviews some major recent advances, and argues for further exploration by the research community of this challenging problem space.

Strategic Technology Investment Analysis: An Integrated System Approach

Science.gov (United States)

Adumitroaie, V.; Weisbin, C. R.

2010-01-01

Complex technology investment decisions within NASA are increasingly difficult to make such that the end results are satisfying the technical objectives and all the organizational constraints. Due to a restricted science budget environment and numerous required technology developments, the investment decisions need to take into account not only the functional impact on the program goals, but also development uncertainties and cost variations along with maintaining a healthy workforce. This paper describes an approach for optimizing and qualifying technology investment portfolios from the perspective of an integrated system model. The methodology encompasses multi-attribute decision theory elements and sensitivity analysis. The evaluation of the degree of robustness of the recommended portfolio provides the decision-maker with an array of viable selection alternatives, which take into account input uncertainties and possibly satisfy nontechnical constraints. The methodology is presented in the context of assessing capability development portfolios for NASA technology programs.

Ethical analysis to improve decision-making on health technologies

DEFF Research Database (Denmark)

Saarni, Samuli I; Hofmann, Bjørn; Lampe, Kristian

2008-01-01

beyond effectiveness and costs to also considering the social, organizational and ethical implications of technologies. However, a commonly accepted method for analysing the ethical aspects of health technologies is lacking. This paper describes a model for ethical analysis of health technology...... that is easy and flexible to use in different organizational settings and cultures. The model is part of the EUnetHTA project, which focuses on the transferability of HTAs between countries. The EUnetHTA ethics model is based on the insight that the whole HTA process is value laden. It is not sufficient...... to only analyse the ethical consequences of a technology, but also the ethical issues of the whole HTA process must be considered. Selection of assessment topics, methods and outcomes is essentially a value-laden decision. Health technologies may challenge moral or cultural values and beliefs...

RISK ANALYSIS IN INFORMATION TECHNOLOGY AND COMMUNICATION OUTSOURCING

Directory of Open Access Journals (Sweden)

Edmir Parada Vasques Prado

2011-12-01

Full Text Available This research aims at evaluating the risk analysis process in Information Technology and Communication (ICT outsourcing conducted by organizations of the private sector. The research is characterized by being a descriptive, quantitative and transversal type study, which was used the survey method. Data were collected through questionnaire, the sample is not random and we used a convenience sampling process. The research made contributions to understanding the risk analysis process in ICT services outsourcing, and identified statistically significant relationships between risk analysis, organization's size and its industry, and between risk analysis and diversity of outsourced services

Business Oriented Technological System Analysis (BOTSA) at Eindhoven University of Technology : an innovative learning method to foster entrepreneurship

NARCIS (Netherlands)

Wijnker, M.A.S.G.; van Kasteren, H.; Romijn, H.A.; Taufik, T.; Prabasari, I.; Rineksane, I.A.; Yana, R.; Widowati, R.; Putra Rosyidi, S.A.; Riyadi, S.; Harsanto, P.

BOTSA is an innovative teaching method for students with technical background in the field of sustainable energy technologies and an interest in entrepreneurship. Two core features of this method, namely the connection between a technological analysis and a business case as well as the involvement

Analysis on Japanese nuclear industrial technologies and their military implications

Energy Technology Data Exchange (ETDEWEB)

Kim, H S; Yang, M H; Kim, H J. and others

2000-10-01

This study covered the following scopes : analysis of Japan's policy trend on the development and utilization of nuclear energy, international and domestic viewpoint of Japan's nuclear weapon capability, Japan's foreign affairs and international cooperation, status of Japan's nuclear technology development and its level, status and level of nuclear core technologies such as nuclear reactor and related fuel cycle technologies. Japan secures the whole spectrum of nuclear technologies including core technologies through the active implementation of nuclear policy for the peaceful uses of nuclear energy during the past five decades. Futhermore, as the result of the active cultivation of nuclear industry, Japan has most nuclear-related facilities and highly advanced nuclear industrial technologies. Therefore, it is reasonable that Japan might be recognized as one of countries having capability to get nuclear capability in several months.

Analysis on Japanese nuclear industrial technologies and their military implications

International Nuclear Information System (INIS)

Kim, H. S.; Yang, M. H.; Kim, H. J. and others

2000-10-01

This study covered the following scopes : analysis of Japan's policy trend on the development and utilization of nuclear energy, international and domestic viewpoint of Japan's nuclear weapon capability, Japan's foreign affairs and international cooperation, status of Japan's nuclear technology development and its level, status and level of nuclear core technologies such as nuclear reactor and related fuel cycle technologies. Japan secures the whole spectrum of nuclear technologies including core technologies through the active implementation of nuclear policy for the peaceful uses of nuclear energy during the past five decades. Futhermore, as the result of the active cultivation of nuclear industry, Japan has most nuclear-related facilities and highly advanced nuclear industrial technologies. Therefore, it is reasonable that Japan might be recognized as one of countries having capability to get nuclear capability in several months

Systems analysis support to the waste management technology center

International Nuclear Information System (INIS)

Rivera, A.L.; Osborne-Lee, I.W.; DePaoli, S.M.

1988-01-01

This paper describes a systems analysis concept being developed in support of waste management planning and analysis activities for Martin Marietta Energy Systems, Inc. (Energy Systems), sites. This integrated systems model serves as a focus for the accumulation and documentation of technical and economic information from current waste management practices, improved operations projects, remedial actions, and new system development activities. The approach is generic and could be applied to a larger group of sites. This integrated model is a source of technical support to waste management groups in the Energy Systems complex for integrated waste management planning and related technology assessment activities. This problem-solving methodology for low-level waste (LLW) management is being developed through the Waste Management Technology Center (WMTC) for the Low-Level Waste Disposal, Development, and Demonstration (LLWDDD) Program. In support of long-range planning activities, this capability will include the development of management support tools such as specialized systems models, data bases, and information systems. These management support tools will provide continuing support in the identification and definition of technical and economic uncertainties to be addressed by technology demonstration programs. Technical planning activities and current efforts in the development of this system analysis capability for the LLWDDD Program are presented in this paper

NASA Subsonic Rotary Wing Project-Multidisciplinary Analysis and Technology Development: Overview

Science.gov (United States)

Yamauchi, Gloria K.

2009-01-01

This slide presentation reviews the objectives of the Multidisciplinary Analysis and Technology Development (MDATD) in the Subsonic Rotary Wing project. The objectives are to integrate technologies and analyses to enable advanced rotorcraft and provide a roadmap to guide Level 1 and 2 research. The MDATD objectives will be met by conducting assessments of advanced technology benefits, developing new or enhanced design tools, and integrating Level 2 discipline technologies to develop and enable system-level analyses and demonstrations.

Biomechanical Analysis and Evaluation Technology Using Human Multi-Body Dynamic Model

Energy Technology Data Exchange (ETDEWEB)

Kim, Yoon Hyuk; Shin, June Ho; Khurelbaatar, Tsolmonbaatar [Kyung Hee University, Yongin (Korea, Republic of)

2011-10-15

This paper presents the biomechanical analysis and evaluation technology of musculoskeletal system by multi-body human dynamic model and 3-D motion capture data. First, medical image based geometric model and material properties of tissue were used to develop the human dynamic model and 3-D motion capture data based motion analysis techniques were develop to quantify the in-vivo joint kinematics, joint moment, joint force, and muscle force. Walking and push-up motion was investigated using the developed model. The present model and technologies would be useful to apply the biomechanical analysis and evaluation of human activities.

Life Cycle Analysis of Dedicated Nano-Launch Technologies

Science.gov (United States)

Zapata, Edgar; McCleskey, Carey (Editor); Martin, John; Lepsch, Roger; Ternani, Tosoc

2014-01-01

Recent technology advancements have enabled the development of small cheap satellites that can perform useful functions in the space environment. Currently, the only low cost option for getting these payloads into orbit is through ride share programs - small satellites awaiting the launch of a larger satellite, and then riding along on the same launcher. As a result, these small satellite customers await primary payload launches and a backlog exists. An alternative option would be dedicated nano-launch systems built and operated to provide more flexible launch services, higher availability, and affordable prices. The potential customer base that would drive requirements or support a business case includes commercial, academia, civil government and defense. Further, NASA technology investments could enable these alternative game changing options. With this context, in 2013 the Game Changing Development (GCD) program funded a NASA team to investigate the feasibility of dedicated nano-satellite launch systems with a recurring cost of less than $2 million per launch for a 5 kg payload to low Earth orbit. The team products would include potential concepts, technologies and factors for enabling the ambitious cost goal, exploring the nature of the goal itself, and informing the GCD program technology investment decision making process. This paper provides an overview of the life cycle analysis effort that was conducted in 2013 by an inter-center NASA team. This effort included the development of reference nano-launch system concepts, developing analysis processes and models, establishing a basis for cost estimates (development, manufacturing and launch) suitable to the scale of the systems, and especially, understanding the relationship of potential game changing technologies to life cycle costs, as well as other factors, such as flights per year.

Analysis of alternative technologies stamping compressor blades of marine engines

Directory of Open Access Journals (Sweden)

Олександр Сергійович Аніщенко

2015-10-01

Full Text Available The author has made an analysis of several technologies stamping forgings compressor blades from titanium alloy ВT3-1. These technologies use different types of forming equipment: crank hot press, high-speed hammers, screw presses with hydraulic drive (SPHD, as well as isothermal forging hydraulic press. He pointed out the main advantages and disadvantages of the technology, noting that high-speed punching in the shipbuilding industry of Ukraine is not used for the manufacture of forgings blades. The article contains an economic analysis of the cost of forgings blades, which are made on four technologies: punching and calibration to crank hot press, stamping and calibration to press for isothermal forging, stamping and calibration on SPHD-press, stamping on SPHD-press and calibration to press for isothermal forging. The author has identified the effective use of these technologies. He showed that the use of SPHD-presses and hydraulic presses for isothermal forging reduces the cost of forging on the average 12% in comparison with the technology at the crank hot stamping press, increases the utilization of metal 1,3-1,5 times more, reduces power consumption 1,05-3,0 times less and complexity of manufacturing 1,8-4,2 times. However SPHD-press increases capital investment in the organization of stamping technology 2,6-5,3 times more and depreciation 2-4 times. Isothermal forging technology requires the cost of the stamps in 1,4-2,0 times higher than stamps for crank presses. The author argues that stamping forging blades technology improvement should be implemented saving basic materials first of all. Efficiency of isothermal stamping and calibration will be the higher, the more geometric dimensions of stamped forgings are

Fostering sustainable energy entrepreneurship among students : the Business Oriented Technological System Analysis (BOTSA) program at Eindhoven University of Technology

NARCIS (Netherlands)

Wijnker, M.A.S.G.; Kasteren, van Han; Romijn, H.A.

2015-01-01

The Business Oriented Technological System Analysis (BOTSA) program is a new teaching and learning concept developed by Eindhoven University of Technology (the Netherlands) with participation from innovative companies in renewable energy. It is designed to stimulate sustainable entrepreneurship

Technology Analysis of Global Smart Light Emitting Diode (LED Development Using Patent Data

Directory of Open Access Journals (Sweden)

Sangsung Park

2017-08-01

Full Text Available Technological developments related to smart light emitting diode (LED systems have progressed rapidly in recent years. In this paper, patent documents related to smart LED technology are collected and analyzed to understand the technology development of smart LED systems. Most previous studies of the technology were dependent on the knowledge and experience of domain experts, using techniques such as Delphi surveys or technology road-mapping. These approaches may be subjective and lack robustness, because the results can vary according to the selected expert groups. We therefore propose a new technology analysis methodology based on statistical modeling to obtain objective and relatively stable results. The proposed method consists of visualization based on Bayesian networks and a linear count model to analyze patent documents related to smart LED technology. Combining these results, a global hierarchical technology structure is created that can enhance the sustainability in smart LED system technology. In order to show how this methodology could be applied to real-world problems, we carry out a case study on the technology analysis of smart LED systems.

Assessment of major nuclear technologies with decision and risk analysis

International Nuclear Information System (INIS)

Winterfeldt, D. von

1995-01-01

Selecting technologies for major nuclear programs involves several complexities, including multiple stakeholders, multiple conflicting objectives, uncertainties, and risk. In addition, the programmatic risks related to the schedule, cost, and performance of these technologies often become major issues in the selection process. This paper describes a decision analysis approach for addressing these complexities in a logical manner

Analysis on Japanese nuclear industrial technologies and their military implications

Energy Technology Data Exchange (ETDEWEB)

Kim, H. S.; Yang, M. H.; Kim, H. J. and others

2000-10-01

This study covered the following scopes : analysis of Japan's policy trend on the development and utilization of nuclear energy, international and domestic viewpoint of Japan's nuclear weapon capability, Japan's foreign affairs and international cooperation, status of Japan's nuclear technology development and its level, status and level of nuclear core technologies such as nuclear reactor and related fuel cycle technologies. Japan secures the whole spectrum of nuclear technologies including core technologies through the active implementation of nuclear policy for the peaceful uses of nuclear energy during the past five decades. Futhermore, as the result of the active cultivation of nuclear industry, Japan has most nuclear-related facilities and highly advanced nuclear industrial technologies. Therefore, it is reasonable that Japan might be recognized as one of countries having capability to get nuclear capability in several months.

Integrated thermal and nonthermal treatment technology and subsystem cost sensitivity analysis

International Nuclear Information System (INIS)

Harvego, L.A.; Schafer, J.J.

1997-02-01

The U.S. Department of Energy's (DOE) Environmental Management Office of Science and Technology (EM-50) authorized studies on alternative systems for treating contact-handled DOE mixed low-level radioactive waste (MLLW). The on-going Integrated Thermal Treatment Systems' (ITTS) and the Integrated Nonthermal Treatment Systems' (INTS) studies satisfy this request. EM-50 further authorized supporting studies including this technology and subsystem cost sensitivity analysis. This analysis identifies areas where technology development could have the greatest impact on total life cycle system costs. These areas are determined by evaluating the sensitivity of system life cycle costs relative to changes in life cycle component or phase costs, subsystem costs, contingency allowance, facility capacity, operating life, and disposal costs. For all treatment systems, the most cost sensitive life cycle phase is the operations and maintenance phase and the most cost sensitive subsystem is the receiving and inspection/preparation subsystem. These conclusions were unchanged when the sensitivity analysis was repeated on a present value basis. Opportunity exists for technology development to reduce waste receiving and inspection/preparation costs by effectively minimizing labor costs, the major cost driver, within the maintenance and operations phase of the life cycle

Determining Technological Innovation and Competitiveness: A Cross Organizational Analysis of the Malaysian Manufacturing Industry

Directory of Open Access Journals (Sweden)

Amlus Ibrahim

2012-01-01

Full Text Available This study analyzed the determinants of technological innovation in the Malaysian manufacturing industry. Its main purpose is to identify a set of management- related variables characterizing Malaysian innovative firms. Moreover, the study aimed to test whether the set of determinant differs for firms with different technological trajectories. A sample of 204 Malaysian firms was used for the investigation, with one respondent from each firm. The questionnaire measured the technological innovation, as well as 5 main potential determinants of innovation adopted from literature. Statistical analysis used, including bivariate correlation and multivariate regression, in identifying association between the technological innovation and the determining variables. The results of the analysis lead the researcher to the model of 5 important determining factors of technological innovation. The important factors were intensity of R&D, trvhnoogical trajectories,intensity of marketing, engineers, scientist and managers with experience locally and technical competency of personnel,. The analysis of technological trajectories confirmed the hypotheses that set of important determinants of innovation as well as the extent of technological innovation differs for firms in different innovation processes.Keywords: Technologies trajectories, technological innovation, intensity of R&D.

Rapid Analysis and Manufacturing Propulsion Technology (RAMPT)

Science.gov (United States)

Fikes, John C.

2018-01-01

NASA's strategic plan calls for the development of enabling technologies, improved production methods, and advanced design and analysis tools related to the agency's objectives to expand human presence in the solar system. NASA seeks to advance exploration, science, innovation, benefits to humanity, and international collaboration, as well as facilitate and utilize U.S. commercial capabilities to deliver cargo and crew to space.

Research on Technology Innovation of China's NEV Industry Based on Patent Analysis

DEFF Research Database (Denmark)

Wang, Jingyu; Liu, Yingqi; Kokko, Ari

2016-01-01

Purpose/Significance: The development of Chinas new energy vehicle(NEV) industry is concerned by both the government and enterprises. Method/Process: Based on the patent data, this paper conducts a deep analysis on the technology innovation of Chinas NEV industry from three perspectives- the year...... distribution of the patent, the distribution of the patent applicants and the distribution of patent technology area. Then, the paper makes further correlation analysis on the NEV industry chain and the patent data. Result/Conclusion: In general,the paper comprehensively reflects the whole picture of Chinas...... NEV industry technology innovation and gives some ideas for its further development....

Explaining Technology Integration in K-12 Classrooms: A Multilevel Path Analysis Model

Science.gov (United States)

Liu, Feng; Ritzhaupt, Albert D.; Dawson, Kara; Barron, Ann E.

2017-01-01

The purpose of this research was to design and test a model of classroom technology integration in the context of K-12 schools. The proposed multilevel path analysis model includes teacher, contextual, and school related variables on a teacher's use of technology and confidence and comfort using technology as mediators of classroom technology…

Data analysis for the LISA Technology Package

Energy Technology Data Exchange (ETDEWEB)

Hewitson, M; Danzmann, K; Diepholz, I; GarcIa, A [Albert-Einstein-Institut, Max-Planck-Institut fuer Gravitationsphysik und Universitaet Hannover, 30167 Hannover (Germany); Armano, M; Fauste, J [European Space Agency, ESAC, Villanueva de la Canada, 28692 Madrid (Spain); Benedetti, M [Dipartimento di Ingegneria dei Materiali e Tecnologie Industriali, Universita di Trento and INFN, Gruppo Collegato di Trento, Mesiano, Trento (Italy); Bogenstahl, J [Department of Physics and Astronomy, University of Glasgow, Glasgow (United Kingdom); Bortoluzzi, D; Bosetti, P; Cristofolini, I [Dipartimento di Ingegneria Meccanica e Strutturale, Universita di Trento and INFN, Gruppo Collegato di Trento, Mesiano, Trento (Italy); Brandt, N [Astrium GmbH, 88039 Friedrichshafen (Germany); Cavalleri, A; Ciani, G; Dolesi, R; Ferraioli, L [Dipartimento di Fisica, Universita di Trento and INFN, Gruppo Collegato di Trento, 38050 Povo, Trento (Italy); Cruise, M [Department of Physics and Astronomy, University of Birmingham, Birmingham (United Kingdom); Fertin, D; GarcIa, C [European Space Agency, ESTEC, 2200 AG Noordwijk (Netherlands); Fichter, W, E-mail: martin.hewitson@aei.mpg.d [Institut fuer Flugmechanik und Flugregelung, 70569 Stuttgart (Germany)

2009-05-07

The LISA Technology Package (LTP) on board the LISA Pathfinder mission aims to demonstrate some key concepts for LISA which cannot be tested on ground. The mission consists of a series of preplanned experimental runs. The data analysis for each experiment must be designed in advance of the mission. During the mission, the analysis must be carried out promptly so that the results can be fed forward into subsequent experiments. As such a robust and flexible data analysis environment needs to be put in place. Since this software is used during mission operations and effects the mission timeline, it must be very robust and tested to a high degree. This paper presents the requirements, design and implementation of the data analysis environment (LTPDA) that will be used for analysing the data from LTP. The use of the analysis software to perform mock data challenges (MDC) is also discussed, and some highlights from the first MDC are presented.

Data analysis for the LISA Technology Package

International Nuclear Information System (INIS)

Hewitson, M; Danzmann, K; Diepholz, I; GarcIa, A; Armano, M; Fauste, J; Benedetti, M; Bogenstahl, J; Bortoluzzi, D; Bosetti, P; Cristofolini, I; Brandt, N; Cavalleri, A; Ciani, G; Dolesi, R; Ferraioli, L; Cruise, M; Fertin, D; GarcIa, C; Fichter, W

2009-01-01

The LISA Technology Package (LTP) on board the LISA Pathfinder mission aims to demonstrate some key concepts for LISA which cannot be tested on ground. The mission consists of a series of preplanned experimental runs. The data analysis for each experiment must be designed in advance of the mission. During the mission, the analysis must be carried out promptly so that the results can be fed forward into subsequent experiments. As such a robust and flexible data analysis environment needs to be put in place. Since this software is used during mission operations and effects the mission timeline, it must be very robust and tested to a high degree. This paper presents the requirements, design and implementation of the data analysis environment (LTPDA) that will be used for analysing the data from LTP. The use of the analysis software to perform mock data challenges (MDC) is also discussed, and some highlights from the first MDC are presented.

High temperature structure design for FBRs and analysis technology

International Nuclear Information System (INIS)

Iwata, Koji

1986-01-01

In the case of FBRs, the operation temperature exceeds 500 deg C, therefore, the design taking the inelastic characteristics of structural materials, such as plasticity and creep, into account is required, and the high grade and detailed evaluation of design is demanded. This new high temperature structure design technology has been advanced in respective countries taking up experimental, prototype and demonstration reactors as the targets. The development of FBRs in Japan was begun with the experimental reactor 'Joyo' which has been operated since 1977, and now, the prototype FBR 'Monju' of 280 MWe is under construction, which is expected to attain the criticality in 1992. In order to realize FBRs which can compete with LWRs through the construction of a demonstration FBR, the construction of large scale plants and the heightening of the economy and reliability are necessary. The features and the role of FBR structural design, the method of high temperature structure design and the trend of its standardization, the trend of the structural analysis technology for FBRs such as inelastic analysis, buckling analysis and fluid and structure coupled vibration analysis, the present status of structural analysis programs, and the subjects for the future of high temperature structure design are explained. (Kako, I.)

76 FR 6406 - Takes of Marine Mammals Incidental to Specified Activities; Taking Marine Mammals Incidental to a...

Science.gov (United States)

2011-02-04

... not limited to, migration, breathing, nursing, breeding, feeding, or sheltering [Level B harassment... 15 in order to protect spawning fish populations. The further restriction of in-water work window... with the U.S. Fish and Wildlife Service (USFWS). As part of the Navy's sea-based strategic deterrence...

77 FR 43049 - Takes of Marine Mammals Incidental to Specified Activities; Taking Marine Mammals Incidental to a...

Science.gov (United States)

2012-07-23

... causing disruption of behavioral patterns, including, but not limited to, migration, breathing, nursing... spawning fish populations. As part of the Navy's sea-based strategic deterrence mission, the Navy Strategic... in-water work when ESA-listed fish populations are most likely to be present. The in-water work...

Establishment of Safety Analysis System and Technology for CANDU Reactors

International Nuclear Information System (INIS)

Min, Byung Joo; Kim, W. Y.; Kim, H. T.; Rhee, B. W.; Yoon, C.; Kang, H. S.; Yoo, K. J.

2005-03-01

To improve the CANDU design/operation safety analysis codes and the CANDU safety analysis methodology, the following works have been done. From the development of the lattice codes (WIMS/CANDU), the lattice model simulates the real core lattice geometry and the effect of the pressure tube creep to the core lattice parameter has been evaluated. From the development of the 3-dimensional thermal-hydraulic analysis model of the moderator behavior (CFX4-CAMO), validation of the model against STERN Lab experiment has been executed. The butterfly-shaped grid structure and the 3-dimensional flow resistance model for porous media were developed and applied to the moderator analysis for Wolsong units 2/3/4. The single fuel channel analysis codes for blowdown and post-blowdown were unified by CATHENA. The 3-dimensional fuel channel analysis model (CFX-CACH) has been developed for validation of CATHENA fuel channel analysis model. The interlinking analysis system (CANVAS) of the thermal-hydraulic safety analysis codes for the primary heat transport system and containment system has been executed. The database system of core physics and thermal-hydraulics experimental data for safety analysis has been established on the URL: http://CANTHIS.kaeri.re.kr. For documentation and Standardization of the general safety analysis procedure, the general safety analysis procedure is developed and applied to a large break LOCA. The present research results can be utilized for establishment of the independent safety analysis technology and acquisition of the optimal safety analysis technology

Ultra Wideband Indoor Positioning Technologies: Analysis and Recent Advances †

Science.gov (United States)

Alarifi, Abdulrahman; Al-Salman, AbdulMalik; Alsaleh, Mansour; Alnafessah, Ahmad; Al-Hadhrami, Suheer; Al-Ammar, Mai A.; Al-Khalifa, Hend S.

2016-01-01

In recent years, indoor positioning has emerged as a critical function in many end-user applications; including military, civilian, disaster relief and peacekeeping missions. In comparison with outdoor environments, sensing location information in indoor environments requires a higher precision and is a more challenging task in part because various objects reflect and disperse signals. Ultra WideBand (UWB) is an emerging technology in the field of indoor positioning that has shown better performance compared to others. In order to set the stage for this work, we provide a survey of the state-of-the-art technologies in indoor positioning, followed by a detailed comparative analysis of UWB positioning technologies. We also provide an analysis of strengths, weaknesses, opportunities, and threats (SWOT) to analyze the present state of UWB positioning technologies. While SWOT is not a quantitative approach, it helps in assessing the real status and in revealing the potential of UWB positioning to effectively address the indoor positioning problem. Unlike previous studies, this paper presents new taxonomies, reviews some major recent advances, and argues for further exploration by the research community of this challenging problem space. PMID:27196906

Innovative Technology-Based Interventions for Autism Spectrum Disorders: A Meta-Analysis

Science.gov (United States)

Grynszpan, Ouriel; Weiss, Patrice L.; Perez-Diaz, Fernando; Gal, Eynat

2014-01-01

This article reports the results of a meta-analysis of technology-based intervention studies for children with autism spectrum disorders. We conducted a systematic review of research that used a pre-post design to assess innovative technology interventions, including computer programs, virtual reality, and robotics. The selected studies provided…

Analysis of cumulative exergy losses in the chains of technological processes

International Nuclear Information System (INIS)

Szargut, J.

1989-01-01

This paper reports on cumulative exergy consumption (CExC) which characterizes the chain of technological processes leading from natural resources to the final product under consideration. The difference of CExC and exergy of material or energy carrier expresses the cumulative exergy loss (CExL) in the mentioned technological chain. Two apportionment methods of CExL have been proposed. Partial exergy losses appear in particular links of the technological chain and characterize the influence of irreversibility of these links. Constituent exergy losses express the influence of thermodynamic imperfection of constituent technological chains leading to the final link of the total technological chain. Analysis of the partial and constituent exergy losses informs about the possibilities of improvement of the technological chains

Parametric economic analysis of natural gas reburn technologies. Topical report, June 1991-June 1992

International Nuclear Information System (INIS)

Bluestein, J.

1992-06-01

The report presents a parametric economic analysis of natural gas reburn technologies used for control of nitrogen oxides emissions in coal-fired utility boilers. It is a competitive assessment of the economics of gas reburn performed in the context of regulatory requirements and competing conventional technologies. The reburn technologies examined are basic gas reburn, reburn with sorbent injection and advanced gas reburn. The analysis determined the levelized costs of these technologies in $/ton of NOx removed with respect to a gas-coal price differential in $/MMBtu of energy input. For those niches in which reburn was less economical, a breakeven capital cost analysis was carried out to determine the R ampersand D goals which would make reburn more cost competitive

Space science technology: In-situ science. Sample Acquisition, Analysis, and Preservation Project summary

Science.gov (United States)

Aaron, Kim

1991-01-01

The Sample Acquisition, Analysis, and Preservation Project is summarized in outline and graphic form. The objective of the project is to develop component and system level technology to enable the unmanned collection, analysis and preservation of physical, chemical and mineralogical data from the surface of planetary bodies. Technology needs and challenges are identified and specific objectives are described.

Using Cluster Analysis for Data Mining in Educational Technology Research

Science.gov (United States)

Antonenko, Pavlo D.; Toy, Serkan; Niederhauser, Dale S.

2012-01-01

Cluster analysis is a group of statistical methods that has great potential for analyzing the vast amounts of web server-log data to understand student learning from hyperlinked information resources. In this methodological paper we provide an introduction to cluster analysis for educational technology researchers and illustrate its use through…

Study on a Preliminary Survey and Analysis of HLW Management Technology Suitable for Nuclear Industrial Environment in Korea

International Nuclear Information System (INIS)

Kim, Eun Ka; Suh, In Suk; Ro, Seong Gy; Yoo, Kun Joong; Yoo, Jae Hyung; Cho, Sung Soo

2010-12-01

The purpose of this study is to suggest development direction of related technologies to analyze patented technology filed as a leading technology and to identify the technology trend for developing HLW management technology suitable for atomic industrial environment in Korea. For patent analysis of HLW management technology, international patent data were collected. And international application number, patent share of applicant and nationality, annual number of applications, application trends of assignees and detail technology, and frequency of patent citations / citations-to were analyzed by statistical analysis. Technical level and competitiveness through quantitative analysis by indicators of patent analysis were confirmed. And technology developments of blank technology, similarity analysis, the point of the main patent and a range of patent rights were analyzed through in-depth analysis. Trends of the patented technology of our country and world patent technology in such results have been identified, and statistical data on patents were secured. Especially in HLW management technology, patent application in Korea compared ti United States, Japan and European Union was began much later for the '90s, and are showing the annual increase on trend of patent application. Patent trend in Korea corresponds to development generation, while declining in foreign patent. The result of this study will be usefully applied to setting a development direction and blank technology of patent technology to pursue future in Korea

Technology and Power. A Foucauldian Analysis of Electronic Monitoring Discourses

OpenAIRE

Anna Vitores; Miquel Domènech

2007-01-01

The article aims to show the importance of FOUCAULT within social studies of science and technology. It also illustrates how a Foucauldian analysis can be useful for studies of science, technology and society focused on power effects. To accomplish these objectives we analyze the emergence of a specific techno-scientific innovation: the electronic monitoring of offenders. We map the discontinuities and discourse dispersions linked to those practices that constitute different materializations ...

ANALYSIS AND COMPARISON OF EXISTING DECISION SUPPORT TECHNOLOGY

Directory of Open Access Journals (Sweden)

V. A. Rybak

2016-01-01

Full Text Available The article presents the results of an analytical review and comparison of the most common managerial decision support technologies: the analytic hierarchy method, neural networks, fuzzy set theory, genetic algorithms and neural-fuzzy modeling. The advantages and disadvantages of these approaches are shown. Determine the scope of their application. It is shown that the hierarchy analysis method works well with the full initial information, but due to the need for expert comparison of alternatives and the selection of evaluation criteria has a high proportion of subjectivity. For problems in the conditions of risk and uncertainty prediction seems reasonable use of the theory of fuzzy sets and neural networks. It is also considered technology collective decision applied both in the general election, and the group of experts. It reduces the time for conciliation meetings to reach a consensus by the preliminary analysis of all views submitted for the plane in the form of points. At the same time the consistency of opinion is determined by the distance between them.

The Clean Energy Manufacturing Analysis Center (CEMAC): Providing Analysis and Insights on Clean Technology Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Johnson, Nicholi S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-28

The U.S. Department of Energy's Clean Energy Manufacturing Analysis Center (CEMAC) provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Policymakers and industry leaders seek CEMAC insights to inform choices to promote economic growth and the transition to a clean energy economy.

Learning curve analysis of mitral valve repair using telemanipulative technology.

Science.gov (United States)

Charland, Patrick J; Robbins, Tom; Rodriguez, Evilio; Nifong, Wiley L; Chitwood, Randolph W

2011-08-01

To determine if the time required to perform mitral valve repairs using telemanipulation technology decreases with experience and how that decrease is influenced by patient and procedure variables. A single-center retrospective review was conducted using perioperative and outcomes data collected contemporaneously on 458 mitral valve repair surgeries using telemanipulative technology. A regression model was constructed to assess learning with this technology and predict total robot time using multiple predictive variables. Statistical analysis was used to determine if models were significantly useful, to rule out correlation between predictor variables, and to identify terms that did not contribute to the prediction of total robot time. We found a statistically significant learning curve (P learning percentage∗ derived from total robot times† for the first 458 recorded cases of mitral valve repair using telemanipulative technology is 95% (R(2) = .40). More than one third of the variability in total robot time can be explained through our model using the following variables: type of repair (chordal procedures, ablations, and leaflet resections), band size, use of clips alone in band implantation, and the presence of a fellow at bedside (P Learning in mitral valve repair surgery using telemanipulative technology occurs at the East Carolina Heart Institute according to a logarithmic curve, with a learning percentage of 95%. From our regression output, we can make an approximate prediction of total robot time using an additive model. These metrics can be used by programs for benchmarking to manage the implementation of this new technology, as well as for capacity planning, scheduling, and capital budget analysis. Copyright © 2011 The American Association for Thoracic Surgery. All rights reserved.

Analysis of key technologies for virtual instruments metrology

Science.gov (United States)

Liu, Guixiong; Xu, Qingui; Gao, Furong; Guan, Qiuju; Fang, Qiang

2008-12-01

Virtual instruments (VIs) require metrological verification when applied as measuring instruments. Owing to the software-centered architecture, metrological evaluation of VIs includes two aspects: measurement functions and software characteristics. Complexity of software imposes difficulties on metrological testing of VIs. Key approaches and technologies for metrology evaluation of virtual instruments are investigated and analyzed in this paper. The principal issue is evaluation of measurement uncertainty. The nature and regularity of measurement uncertainty caused by software and algorithms can be evaluated by modeling, simulation, analysis, testing and statistics with support of powerful computing capability of PC. Another concern is evaluation of software features like correctness, reliability, stability, security and real-time of VIs. Technologies from software engineering, software testing and computer security domain can be used for these purposes. For example, a variety of black-box testing, white-box testing and modeling approaches can be used to evaluate the reliability of modules, components, applications and the whole VI software. The security of a VI can be assessed by methods like vulnerability scanning and penetration analysis. In order to facilitate metrology institutions to perform metrological verification of VIs efficiently, an automatic metrological tool for the above validation is essential. Based on technologies of numerical simulation, software testing and system benchmarking, a framework for the automatic tool is proposed in this paper. Investigation on implementation of existing automatic tools that perform calculation of measurement uncertainty, software testing and security assessment demonstrates the feasibility of the automatic framework advanced.

Innovative classification of methods of the Future-oriented Technology Analysis

OpenAIRE

HALICKA, Katarzyna

2016-01-01

In the era characterized by significant dynamics of the environment traditional methods of anticipating the future, assuming the immutability of the factors affecting the forecasted phenomenon, may be in the long term ineffective. The modern approach of predicting the future of technology, taking into account the multidimensionality of the environment, is, among other things, the Future-Oriented Technology Analysis (FTA). Designing the FTA research procedure is a complex process, both in orga...

Technology Clusters Exploration for Patent Portfolio through Patent Abstract Analysis

Directory of Open Access Journals (Sweden)

Gabjo Kim

2016-12-01

Full Text Available This study explores technology clusters through patent analysis. The aim of exploring technology clusters is to grasp competitors’ levels of sustainable research and development (R&D and establish a sustainable strategy for entering an industry. To achieve this, we first grouped the patent documents with similar technologies by applying affinity propagation (AP clustering, which is effective while grouping large amounts of data. Next, in order to define the technology clusters, we adopted the term frequency-inverse document frequency (TF-IDF weight, which lists the terms in order of importance. We collected the patent data of Korean electric car companies from the United States Patent and Trademark Office (USPTO to verify our proposed methodology. As a result, our proposed methodology presents more detailed information on the Korean electric car industry than previous studies.

[Guidelines for budget impact analysis of health technologies in Brazil].

Science.gov (United States)

Ferreira-Da-Silva, Andre Luis; Ribeiro, Rodrigo Antonini; Santos, Vânia Cristina Canuto; Elias, Flávia Tavares Silva; d'Oliveira, Alexandre Lemgruber Portugal; Polanczyk, Carisi Anne

2012-07-01

Budget impact analysis (BIA) provides operational financial forecasts to implement new technologies in healthcare systems. There were no previous specific recommendations to conduct such analyses in Brazil. This paper reviews BIA methods for health technologies and proposes BIA guidelines for the public and private Brazilian healthcare system. The following recommendations were made: adopt the budget administrator's perspective; use a timeframe of 1 to 5 years; compare reference and alternative scenarios; consider the technology's rate of incorporation; estimate the target population by either an epidemiological approach or measured demand; consider restrictions on technologies' indication or factors that increase the demand for them; consider direct and averted costs; do not adjust for inflation or discounts; preferably, integrate information on a spreadsheet; calculate the incremental budget impact between scenarios; and summarize information in a budget impact report.

Technological change in Swiss thermal waste treatment: An expert-based socio-technical analysis

International Nuclear Information System (INIS)

Spoerri, Andy; Lang, Daniel J.; Staeubli, Beat; Scholz, Roland W.

2010-01-01

Understanding technological change provides a crucial basis for governing sustainability transitions. In this paper we present an analysis of technological change using the example of Swiss thermal waste processing. In recent years, increased concerns about the low quality of residues from grate-firing systems led to the examination of alternative technologies. Yet despite clear indications of a potential better performance with respect to residue quality, none of these alternatives has been adopted. Based on a two-stage knowledge integration among 15 leading experts, in a retrospective analysis we identified factors that have significantly affected technological change in Swiss thermal waste processing. These factors were then related to three technological options representing different types of technological change, i.e., from incremental improvements of the existing to the implementation of a new technology. The results indicate that technological change is currently in a technological lock-in and provide detailed insights on the causes. The lock-in results in the step-wise further development of the status quo grate-firing system despite its limitations for improving the residue qualities. Almost all factors (legal, economic, societal, technological) of the existing 'thermal waste management' system have been well adapted to the cost- and energy-efficient grate-firing technology, blocking innovative technologies from entering the Swiss market. In addition, pressures from the context, e.g., societal pressure related to landfill risks, have not been strong enough to promote non-incremental change.

Modeling energy technology choices. Which investment analysis tools are appropriate?

International Nuclear Information System (INIS)

Johnson, B.E.

1994-01-01

A variety of tools from modern investment theory appear to hold promise for unraveling observed energy technology investment behavior that often appears anomalous when analyzed using traditional investment analysis methods. This paper reviews the assumptions and important insights of the investment theories most commonly suggested as candidates for explaining the apparent ''energy technology investment paradox''. The applicability of each theory is considered in the light of important aspects of energy technology investment problems, such as sunk costs, uncertainty and imperfect information. The theories addressed include the capital asset pricing model, the arbitrage pricing theory, and the theory of irreversible investment. Enhanced net present value methods are also considered. (author)

Green technologies for the use of urban wastewater: economic analysis

Directory of Open Access Journals (Sweden)

Horacio Alfredo Gil

2013-12-01

Full Text Available Urban sewage is one of the biggest polluters of water resources. For treatment, the usual conventional technologies (CT are based on civil and hydraulic engineering; more recently, green technologies (GT based on biology and ecology began to be developed. The aim of this study was to assess the economic aspects of these technologies using cost-benefit analysis. The economic benefits are derived from the sale of forest products and the environmental benefits of water decontamination, valued by the avoided cost method. The results of the study establish that GT have better commercial and economic performance than CT, and that the inclusion of environmental benefit significantly improves the results.

Analysis of in-situ renewal technology for the backhoe bucket bores

Energy Technology Data Exchange (ETDEWEB)

Torims, Toms; Ratkus, Andris; Vilcans, Janis; Zarins, Marcis; Rusa, Aldis [Department of Material Processing Technology Faculty of Transport and Mechanical Engineering Riga Technical University, Riga (Latvia)

2011-07-01

The overall aim of this article is to outline the progress of the research on how to develop an economically and scientifically justified backhoe buckets boreholes renewal technology by using mobile on-site technological equipment. Today the new mobile (in-situ) repair technologies are extensively used for the specialized equipment and machinery repairs. This repair technology is deployed directly on the damaged product: repair equipment is installed by using specialized centering devices. The bucket bores central axes are used as a reference base and damaged layer of material is removed mechanically applying turning operation. Subsequently the renewable surface is covered by new material layer by means of regular MIG/MAG welding. The last technological operation is final turning to the nominal diameter. Outlined renewal technology should meet high expectations – this necessitates in-depth and systematic study of pins and bores which are the most repaired objects of shovel bucket excavators. Therefore, research on established accuracy and technical requirements, both for the repaired unit and technological equipment in line with in-situ repair technology specifics, has been done. It was supported by impact analysis of the technological regimes to surface integrity with ambition to provide practical recommendations for the optimal choice of the technological regimes. Key words: in-situ repair technology, surface integrity, technological parameters.

Ethical analysis to improve decision-making on health technologies.

Science.gov (United States)

Saarni, Samuli I; Hofmann, Bjørn; Lampe, Kristian; Lühmann, Dagmar; Mäkelä, Marjukka; Velasco-Garrido, Marcial; Autti-Rämö, Ilona

2008-08-01

Health technology assessment (HTA) is the multidisciplinary study of the implications of the development, diffusion and use of health technologies. It supports health-policy decisions by providing a joint knowledge base for decision-makers. To increase its policy relevance, HTA tries to extend beyond effectiveness and costs to also considering the social, organizational and ethical implications of technologies. However, a commonly accepted method for analysing the ethical aspects of health technologies is lacking. This paper describes a model for ethical analysis of health technology that is easy and flexible to use in different organizational settings and cultures. The model is part of the EUnetHTA project, which focuses on the transferability of HTAs between countries. The EUnetHTA ethics model is based on the insight that the whole HTA process is value laden. It is not sufficient to only analyse the ethical consequences of a technology, but also the ethical issues of the whole HTA process must be considered. Selection of assessment topics, methods and outcomes is essentially a value-laden decision. Health technologies may challenge moral or cultural values and beliefs, and their implementation may also have significant impact on people other than the patient. These are essential considerations for health policy. The ethics model is structured around key ethical questions rather than philosophical theories, to be applicable to different cultures and usable by non-philosophers. Integrating ethical considerations into HTA can improve the relevance of technology assessments for health care and health policy in both developed and developing countries.

Sponge Aquaculture Trials in the East-Mediterranean Sea: New Approaches to Earlier Ideas

NARCIS (Netherlands)

Osinga, R.; Sidri, M.; Cerig, E.; Gokalp, S.Z.; Gokalp, M.

2010-01-01

Aquaculture trials were conducted in the East Aegean Sea with Dysidea avara and Chondrosia reniformis to test the possibility of growing these sponges in the vicinity of sea-based fish farms. Culturing sponges in the vicinity of fish farms may have two benefits: the sponges may grow faster due to an

Analysis of risk management during AP1000 equipment technology transfer and localization

International Nuclear Information System (INIS)

Gao Yongjun; Guan Rui

2009-01-01

This article analyzes the risk factors existing in AP1000 equipment technology transfer and localization process by describing the invitation for bid, tender evaluation and contract negotiation process of the third-generation nuclear power plant technology introduction project of China and discusses the classification, evaluation and analysis methods of risks, and puts forward some referential suggestions for the successful introduction of equipment technology for AP1000 nuclear project. (authors)

An application of a grey data envelopment analysis model to the risk comparative analysis among power generation technologies

International Nuclear Information System (INIS)

Garcia, Pauli A.A.; Melo, P.F. Frutuoso e

2005-01-01

The comparative risk analysis is a technique for which one seeks equilibrium among benefits, costs, and risks associated with common-purpose activities performed. In light of the ever-growing world demand for a sustainable power supply, we present in this paper a comparison among different power generation technologies. The data for the comparative analyses has been taken from the literature. A hybrid approach is proposed for performing the comparisons, in which the Grey System Theory and the Data Envelopment Analysis (DEA) are combined. The purpose of this combination is to take into account different features that influence the risk analysis, when one aims to compare different power generation technologies. The generation technologies considered here are: solar, biomass, wind, hydroelectric, oil, natural gas, coal, and nuclear. The criteria considered in the analysis are: contribution to the life expectancy reduction (in years); contribution to the life expectancy growth (in years); used area (in km 2 ); tons of released CO 2 per GWh generated. The results obtained by using the aforementioned approach are promising and demonstrate the advantages of the Grey-DEA approach for the problem at hand. The results show that investments in the nuclear and solar power generation technologies are the options that present the best relative efficiencies, that is, among all considered options, they presented the best cost-benefit-risk relationships. (author)

Control system for technological processes in tritium processing plants with process analysis

International Nuclear Information System (INIS)

Retevoi, Carmen Maria; Stefan, Iuliana; Balteanu, Ovidiu; Stefan, Liviu; Bucur, Ciprian

2005-01-01

Integration of a large variety of installations and equipment into a unitary system for controlling the technological process in tritium processing nuclear facilities appears to be a rather complex approach particularly when experimental or new technologies are developed. Ensuring a high degree of versatility allowing easy modifications in configurations and process parameters is a major requirement imposed on experimental installations. The large amount of data which must be processed, stored and easily accessed for subsequent analyses imposes development of a large information network based on a highly integrated system containing the acquisition, control and technological process analysis data as well as data base system. On such a basis integrated systems of computation and control able to conduct the technological process could be developed as well protection systems for cases of failures or break down. The integrated system responds to the control and security requirements in case of emergency and of the technological processes specific to the industry that processes radioactive or toxic substances with severe consequences in case of technological failure as in the case of tritium processing nuclear plant. In order to lower the risk technological failure of these processes an integrated software, data base and process analysis system are developed, which, based on identification algorithm of the important parameters for protection and security systems, will display the process evolution trend. The system was checked on a existing plant that includes a removal tritium unit, finally used in a nuclear power plant, by simulating the failure events as well as the process. The system will also include a complete data base monitoring all the parameters and a process analysis software for the main modules of the tritium processing plant, namely, isotope separation, catalytic purification and cryogenic distillation

Impact evaluation for University-Business Cooperation and Technology Transfer in higher education systems: cluster analysis

Directory of Open Access Journals (Sweden)

Tomoe Daniela Hamanaka Gusberti

2017-09-01

Full Text Available Abstract Higher education systems evolved in recent decades. Universities must not only provide society with capable professionals but also act in the market for technologies, knowledge, and ideas to promote technological development. This paper discusses the motivational performance evaluation system for technology transfer process, specifically the patterns’ evaluation of academic units considering micro-cultures and idiosyncrasies’ analysis, in the academic context of autonomy. Based on action research, the existing performance evaluation system was assessed, and multivariate cluster analysis was proposed and tested as a method to enable micro cultures’ identification and evaluation. The analysis proposed enabled a tool for reflexive discussion regarding the effectiveness of the institutional innovation system in academic units and Engineering Education, and its implications for social and technological development of industry and society enabled action proposals for improvement in the university’s technology transfer management process.

The development of human behaviour analysis techniques -The development of human factors technologies-

International Nuclear Information System (INIS)

Lee, Jung Woon; Cheon, Se Woo; Shu, Sang Moon; Park, Geun Ok; Lee, Yong Hee; Lee, Han Yeong; Park, Jae Chang; Lee, Eu Jin; Lee, Seung Hee

1994-04-01

This project has two major areas ; one is the development of an operator task simulation software and another is the development of human error analysis and application technologies. In this year project, the second year, for the development of an operator task simulation software, we studied the followings: - analysis of the characteristics of operator tasks, - development of operator task structures : Macro Structures, - development of an operator task simulation analyzes, - analysis of performance measures. And the followings for the development of human error analysis and application technologies : - analysis of human error mechanisms, - analysis of human error characteristics in tasks, - analysis of human error occurrence in Korean Nuclear Power Plants, - establishment of an experimental environment for human error data collection with Compact Nuclear Simulator, - basic design of a Multimedia-based Human Error Representing System. (Author)

Factors influencing the societal acceptance of new energy technologies. Meta-analysis of recent European projects

Energy Technology Data Exchange (ETDEWEB)

Poti, B.; Difiore, M. [Consiglio Nazionale delle Ricerche, Rome (Italy); Brohmann, B.; Daniels, A.; Fritsche, U.; Huenecke, K. [Oeko-Institut, Darmstadt (Germany); Heiskanen, E. [National Consumer Research Centre, Helsinki (Finland); Raven, R.P.J.M.; Mourik, R.; Feenstra, C.F.J.; Willemse, R. [ECN Policy Studies, Petten (Netherlands); Hodson, M. [Centre for Sustainable Urban and Regional Futures SURF, University of Salford, Manchester (United Kingdom); Alcantud Torrent, A.; Schaefer, B. [Ecoinstitut Barcelona, Barcelona (Spain); Farkas, B.; Fucsko, J. [Hungarian Environmental Economics Centre MAKK, Budapest (Hungary); Jolivet, E. [IAE Toulouse, Toulouse (France); Maack, M.H.; Matschoss, K. [Icelandic New Energy INE, Reykjavik (Iceland); Oniszk-Poplawska, A. [Institute for Renewable Energy IEO, Warszawa (Poland); Prasad, G. [Energy Research Centre ERC, University of Cape Town, Cape Town (South Africa)

2008-03-15

Within this report an analysis is made of 27 case studies of historical and recent new energy technologies in different European regions and South Africa. The analysis focuses on the societal acceptance in these projects in order to identify determinants of success and failure. A wide diversity of technologies is discussed including hydrogen, CO2 capture and storage, biomass, solar and wind energy technologies.

Life support technology investment strategies for flight programs: An application of decision analysis

Science.gov (United States)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA's proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for development of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

Multiple criteria decision analysis for health technology assessment.

Science.gov (United States)

Thokala, Praveen; Duenas, Alejandra

2012-12-01

Multicriteria decision analysis (MCDA) has been suggested by some researchers as a method to capture the benefits beyond quality adjusted life-years in a transparent and consistent manner. The objectives of this article were to analyze the possible application of MCDA approaches in health technology assessment and to describe their relative advantages and disadvantages. This article begins with an introduction to the most common types of MCDA models and a critical review of state-of-the-art methods for incorporating multiple criteria in health technology assessment. An overview of MCDA is provided and is compared against the current UK National Institute for Health and Clinical Excellence health technology appraisal process. A generic MCDA modeling approach is described, and the different MCDA modeling approaches are applied to a hypothetical case study. A comparison of the different MCDA approaches is provided, and the generic issues that need consideration before the application of MCDA in health technology assessment are examined. There are general practical issues that might arise from using an MCDA approach, and it is suggested that appropriate care be taken to ensure the success of MCDA techniques in the appraisal process. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Organizational Capability Deployment Analysis for Technology Conversion into Processes, Products and Services

Directory of Open Access Journals (Sweden)

Tomoe Daniela Hamanaka Gusberti

2013-12-01

Full Text Available This article discusses Organizational Capabilities as the basic components of business models that emerged under the New Product Development Process and Technological Management. In the context of the new Technology Based Companies Development, it adopts a qualitative research in order to identify, analyze and underpin the organizational capability deployment in a process of technology conversion into product and service. The analysis was carried out considering concepts from literature review, in a technology based enterprise started by an academic spin-off company. The analysis enabled the elicitation of a Business Model and the discussion of their components, and correspondent evolution hypothesis. The paper provides an example of capability deployment accordingly the established theory illustrated by a case study. The study not just enumerate the needed partners, resources, customer channels, it enabled the description of their connection, representing the logic behind the decision made to develop the conceptual model. This detailed representation of the model allows better addressed discussions.

Implementing recovery: an analysis of the key technologies in Scotland

Science.gov (United States)

2011-01-01

Background Over the past ten years the promotion of recovery has become a stated aim of mental health policies within a number of English speaking countries, including Scotland. Implementation of a recovery approach involves a significant reorientation of mental health services and practices, which often poses significant challenges for reformers. This article examines how four key technologies of recovery have assisted in the move towards the creation of a recovery-oriented mental health system in Scotland. Methods Drawing on documentary analysis and a series of interviews we examine the construction and implementation of four key recovery 'technologies' as they have been put to use in Scotland: recovery narratives, the Scottish Recovery Indicator (SRI), Wellness Recovery Action Planning (WRAP) and peer support. Results Our findings illuminate how each of these technologies works to instantiate, exemplify and disseminate a 'recovery orientation' at different sites within the mental health system in order to bring about a 'recovery oriented' mental health system. They also enable us to identify some of the factors that facilitate or hinder the effectiveness of those technologies in bringing about a change in how mental health services are delivered in Scotland. These finding provide a basis for some general reflections on the utility of 'recovery technologies' to implement a shift towards recovery in mental health services in Scotland and elsewhere. Conclusions Our analysis of this process within the Scottish context will be valuable for policy makers and service coordinators wishing to implement recovery values within their own national mental health systems. PMID:21569633

Implementing recovery: an analysis of the key technologies in Scotland

Directory of Open Access Journals (Sweden)

Sturdy Steve

2011-05-01

Full Text Available Abstract Background Over the past ten years the promotion of recovery has become a stated aim of mental health policies within a number of English speaking countries, including Scotland. Implementation of a recovery approach involves a significant reorientation of mental health services and practices, which often poses significant challenges for reformers. This article examines how four key technologies of recovery have assisted in the move towards the creation of a recovery-oriented mental health system in Scotland. Methods Drawing on documentary analysis and a series of interviews we examine the construction and implementation of four key recovery 'technologies' as they have been put to use in Scotland: recovery narratives, the Scottish Recovery Indicator (SRI, Wellness Recovery Action Planning (WRAP and peer support. Results Our findings illuminate how each of these technologies works to instantiate, exemplify and disseminate a 'recovery orientation' at different sites within the mental health system in order to bring about a 'recovery oriented' mental health system. They also enable us to identify some of the factors that facilitate or hinder the effectiveness of those technologies in bringing about a change in how mental health services are delivered in Scotland. These finding provide a basis for some general reflections on the utility of 'recovery technologies' to implement a shift towards recovery in mental health services in Scotland and elsewhere. Conclusions Our analysis of this process within the Scottish context will be valuable for policy makers and service coordinators wishing to implement recovery values within their own national mental health systems.

Business of Nuclear Safety Analysis Office, Nuclear Technology Test Center

International Nuclear Information System (INIS)

Hayakawa, Masahiko

1981-01-01

The Nuclear Technology Test Center established the Nuclear Safety Analysis Office to execute newly the works concerning nuclear safety analysis in addition to the works related to the proving tests of nuclear machinery and equipments. The regulations for the Nuclear Safety Analysis Office concerning its organization, business and others were specially decided, and it started the business formally in August, 1980. It is a most important subject to secure the safety of nuclear facilities in nuclear fuel cycle as the premise of developing atomic energy. In Japan, the strict regulation of safety is executed by the government at each stage of the installation, construction, operation and maintenance of nuclear facilities, based on the responsibility for the security of installers themselves. The Nuclear Safety Analysis Office was established as the special organ to help the safety examination related to the installation of nuclear power stations and others by the government. It improves and puts in order the safety analysis codes required for the cross checking in the safety examination, and carries out safety analysis calculation. It is operated by the cooperation of the Science and Technology Agency and the Agency of Natural Resources and Energy. The purpose of establishment, the operation and the business of the Nuclear Safety Analysis Office, the plan of improving and putting in order of analysis codes, and the state of the similar organs in foreign countries are described. (Kako, I.)

76 FR 68189 - Healthcare Technology Holdings, Inc.; Analysis of Proposed Agreement Containing Consent Orders To...

Science.gov (United States)

2011-11-03

... FEDERAL TRADE COMMISSION [File No. 111 0097] Healthcare Technology Holdings, Inc.; Analysis of... Technology Holdings, Inc. (``Healthcare Technology''), subject to final approval, an Agreement Containing... Healthcare Technology's proposed acquisition of SDI Health LLC (``SDI'') from SDI Health Holdings LLC (``SDI...

Wireless Technology Use Case Requirement Analysis for Future Space Applications

Science.gov (United States)

Abedi, Ali; Wilkerson, DeLisa

2016-01-01

This report presents various use case scenarios for wireless technology -including radio frequency (RF), optical, and acoustic- and studies requirements and boundary conditions in each scenario. The results of this study can be used to prioritize technology evaluation and development and in the long run help in development of a roadmap for future use of wireless technology. The presented scenarios cover the following application areas: (i) Space Vehicles (manned/unmanned), (ii) Satellites and Payloads, (iii) Surface Explorations, (iv) Ground Systems, and (v) Habitats. The requirement analysis covers two parallel set of conditions. The first set includes the environmental conditions such as temperature, radiation, noise/interference, wireless channel characteristics and accessibility. The second set of requirements are dictated by the application and may include parameters such as latency, throughput (effective data rate), error tolerance, and reliability. This report provides a comprehensive overview of all requirements from both perspectives and details their effects on wireless system reliability and network design. Application area examples are based on 2015 NASA Technology roadmap with specific focus on technology areas: TA 2.4, 3.3, 5.2, 5.5, 6.4, 7.4, and 10.4 sections that might benefit from wireless technology.

Technology images and concepts of technology in transition. An analysis in the philosophy of technology and general technology; Technikbilder und Technikkonzepte im Wandel. Eine technikphilosophische und allgemeintechnische Analyse

Energy Technology Data Exchange (ETDEWEB)

Banse, G. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (DE). Inst. fuer Technikfolgen-Abschaetzung und Systemanalyse (ITAS); Meier, B. [Potsdam Univ. (Germany). Inst. fuer Arbeitslehre/Technik; Wolffgramm, H. (eds.)

2002-02-01

This volume contains contributions resulting from an expert discussion on 'Technology Images and Concepts of Technology in Transition - an analysis in the philosophy of technology and general technology. This expert discussion took place on 6 October 2000 at the State Pedagogical Institute Brandenburg in Ludwigsfelde-Struveshof and was conceived and organized co-operatively by the Forschungszentrum Karlsruhe, Institute for Technology Assessment and Systems Analysis, the University of Potsdam, Institute for the Theory of Work/Technology and Professor Horst Wolffgramm, Frankfurt (Oder). It was the aim of the expert discussion to compile, compare and relate the various positions in the philosophy of technology, general technology science, the history of technology and the didactics of technology of the 'conceptualisation' of technology as a basis for generally understanding technology or for a scientifically based 'image of technology' to each other, and then to make them accessible for curricula within a framework of conceiving general technical education at all school levels. The contributions are grouped according to the two main foci of the event: On the one hand they are concerned with determining a contemporary concept of technology ('Image of technology'). One of the aims is to characterize technological change from the historical-genetic perspective and in this way to access technology as a work of mankind, as an important element of our culture. At the same time it is necessary to forecast future developments or to make future paths of development visible to enable the indication of change by basic innovations. Second, on this basis and supported by educational theory, conclusions are drawn for future-oriented technical general education for all students. The main focus in this is on the linkage between goals, content and subject-specific methods. In order to enable the determination of competence of any individual

Social behaviour of Jackass penguins at sea | Siegfried | African ...

African Journals Online (AJOL)

This paper reports flocking, communal feeding and other aspects of sea-based social behaviour in the jackass penguin (Spheniscus demersus). Penguins tend to occur within about 15 km of the mainland, but range farther afield from the islands used for breeding and/or roosting. Relatively large groups of 50 and more birds ...

Application of mathematical methods of analysis in selection of competing information technologies

Science.gov (United States)

Semenov, V. L.; Kadyshev, E. N.; Zakharova, A. N.; Patianova, A. O.; Dulina, G. S.

2018-05-01

The article discusses the use of qualimetry methods using the apparatus of mathematical analysis in the formation of the integral index that allows one to select the best option among competing information technology. The authors propose the use of affine space in the evaluation and selection of competing information technologies.

Technological Change in a Small European Country: A Patent- Based Analysis for Greece

OpenAIRE

Maria Markatou

2012-01-01

The description of the development of the Greek technological change is the main aim of this paper. The analysis is based on the examination and elaboration of patent records and relies on the study of their technological content and their economic direction. Results show that technological change focuses on producing new technologies for the ‘agricultural sector’, ‘food’, ‘pharmaceuticals’, ‘metal shaping-separation’, ‘rubber-plastic products’, ‘building-housing’, ‘instruments’ and ‘electric...

Commercial sector gas cooling technology frontier and market share analysis

International Nuclear Information System (INIS)

Pine, G.D.; Mac Donald, J.M.; McLain, H.A.

1990-01-01

This paper describes a method, developed for the Gas Research Institute of the United States, that can assist planning for commercial sector natural gas cooling systems R and D. These systems are higher in first cost than conventional electric chillers. Yet, engine-driven chiller designs exist which are currently competitive in U.S. markets typified by high electricity or demand charges. Section II describes a scenario analysis approach used to develop and test the method. Section III defines the technology frontier, a conceptual tool for identifying new designs with sales potential. Section IV describes a discrete choice method for predicting market shares of technologies with sales potential. Section V shows how the method predicts operating parameter, cost, and/or performance goals for technologies without current sales potential (or for enhancing a frontier technology's sales potential). Section VI concludes with an illustrative example for the Chicago office building retrofit market

Sustainability Assessment of Electricity Generation Technologies in Egypt Using Multi-Criteria Decision Analysis

Directory of Open Access Journals (Sweden)

Mostafa Shaaban

2018-05-01

Full Text Available Future electricity planning necessitates a thorough multi-faceted analysis of the available technologies in order to secure the energy supply for coming generations. To cope with worldwide concerns over sustainable development and meet the growing demands of electricity we assess the future potential technologies in Egypt through covering their technical, economic, environmental and social aspects. In this study we fill the gap of a lacking sustainability assessment of energy systems in Egypt where most of the studies focus mainly on the economic and technical aspects of planning future installation of power plants in Egypt. Furthermore, we include the stakeholder preferences of the indicators in the energy sector into our assessment. Moreover, we perform a sensitivity analysis through single dimension assessment scenarios of the technologies as well as a sustainable scenario with equal preferences of all dimensions of the sustainability. We employ two multi-criteria decision analysis (MCDA methodologies: the analytical hierarchy process for weighing the assessment criteria, and the weighted sum method for generating a general integrated sustainability index for each technology. The study investigates seven technologies: coal, natural gas, wind, concentrated solar power, photovoltaics, biomass and nuclear. The results reveal a perfect matching between the ranking of the technologies by the stakeholders and the sustainable scenario showing the highest ranking for natural gas and the lowest for nuclear and coal. There is a strong potential for renewable energy technologies to invade the electricity market in Egypt where they achieve the second ranking after natural gas. The Monte-Carlo approach gives photovoltaics a higher ranking over concentrated solar power as compared to the sample data ranking. The study concludes the importance of a multi-dimensional evaluation of the technologies while considering the preferences of the stakeholders in

Life cycle analysis of advanced nuclear power generation technologies

International Nuclear Information System (INIS)

Uchiyama, Yoji; Yokoyama, Hayaichi

1996-01-01

In this research, as for light water reactors and fast breeder reactors, for the object of all the processes from the mining, transport and refining of fuel, electric power generation to the treatment and disposal of waste, the amount of energy input and the quantity of CO 2 emission over the life cycle were analyzed, and regarding the influence that the technical progress of nuclear power generation exerted to environment, the effect of improvement was elucidated. Attention has been paid to nuclear power generation as its CO 2 emission is least, and the effect of global warming is smallest. In order to reduce the quantity of radioactive waste generation in LWRs and the cost of fuel cycle, and to extend the operation cycle, the technical development for heightening fuel burnup is in progress. The process of investigation of the new technologies of nuclear power generation taken up in this research is described. The analysis of the energy balance of various power generation methods is discussed. In the case of pluthermal process, the improvement of energy balance ratio is dependent on uranium enrichment technology. Nuclear power generation requires much materials and energy for the construction, and emits CO 2 indirectly. The CO 2 unit emission based on the analysis of energy balance was determined for the new technologies of nuclear power generation, and the results are shown. (K.I.)

MAS: Malware Analysis System Based on Hardware-Assisted Virtualization Technology

Science.gov (United States)

Kim, Taehyoung; Kim, Inhyuk; Min, Changwoo; Eom, Young Ik

There are many analysis techniques in order to analyze malicious codes. However, recently malicious codes often evade detection using stealthy obfuscation techniques, and attack computing systems. We propose an enhanced dynamic binary instrumentation using hardware-assisted virtualization technology. As a machine-level analyzer, our system can be isolated from almost the whole threats of malware, and provides single step analysis environment. Proposed system also supports rapid system call analysis environment. We implement our malware analysis system (referred as MAS) on the KVM hypervisor with Intel VT-x virtualization support. Our experiments with benchmarks show that the proposed system provides efficient analysis environment with low overhead.

Different methods for ethical analysis in health technology assessment: an empirical study.

Science.gov (United States)

Saarni, Samuli I; Braunack-Mayer, Annette; Hofmann, Bjørn; van der Wilt, Gert Jan

2011-10-01

Ethical analysis can highlight important ethical issues related to implementing a technology, values inherent in the technology itself, and value-decisions underlying the health technology assessment (HTA) process. Ethical analysis is a well-acknowledged part of HTA, yet seldom included in practice. One reason for this is lack of knowledge about the properties and differences between the methods available. This study compares different methods for ethical analysis within HTA. Ethical issues related to bariatric (obesity) surgery were independently evaluated using axiological, casuist, principlist, and EUnetHTA models for ethical analysis within HTA. The methods and results are presented and compared. Despite varying theoretical underpinnings and practical approaches, the four methods identified similar themes: personal responsibility, self-infliction, discrimination, justice, public funding, and stakeholder involvement. The axiological and EUnetHTA models identified a wider range of arguments, whereas casuistry and principlism concentrated more on analyzing a narrower set of arguments deemed more important. Different methods can be successfully used for conducting ethical analysis within HTA. Although our study does not show that different methods in ethics always produce similar results, it supports the view that different methods of ethics can yield relevantly similar results. This suggests that the key conclusions of ethical analyses within HTA can be transferable between methods and countries. The systematic and transparent use of some method of ethics appears more important than the choice of the exact method.

Activation analysis in the environment: Science and technology

International Nuclear Information System (INIS)

Lenihan, J.

1989-01-01

Science is disciplined curiosity. Activation analysis was created more than 50 yr ago by Hevesy's curiosity and Levi's experimental skill. Technology is the exploitation of machines and materials for the fulfillment of human needs or wants. The early history of neutron activation analysis (NAA) was greatly influenced by military requirements. Since then the technique has found applications in many disciplines, including materials science, medicine, archaeology, geochemistry, agriculture, and forensic science. More recently, neutron activation analysts, responding to increasing public interest and concern, have made distinctive contributions to the study of environmental problems. Activation analysis, though it uses some procedures derived from physics, is essentially a chemical technique. The chemical study of the environment may be reviewed under many headings; three are discussed here: 1. occupational medicine 2. health of the general public 3. environmental pollution

Technology and Power. A Foucauldian Analysis of Electronic Monitoring Discourses

Directory of Open Access Journals (Sweden)

Anna Vitores

2007-05-01

Full Text Available The article aims to show the importance of FOUCAULT within social studies of science and technology. It also illustrates how a Foucauldian analysis can be useful for studies of science, technology and society focused on power effects. To accomplish these objectives we analyze the emergence of a specific techno-scientific innovation: the electronic monitoring of offenders. We map the discontinuities and discourse dispersions linked to those practices that constitute different materializations of this electronic device. Because we start from questions concerning power technologies, rather than simply analyzing the ideologies and knowledges that legitimate electronic monitoring and its technical reliability, we attend to the assemblage of discourses, rhetorics, vocabularies, techniques and procedures by which knowledge is intertwined and joins with the exercise of power. In this way, we show how one of FOUCAULT's technologies of power—disciplinary technology—is articulated, nourished and contradicted by other emergent logics drawing on new forms of regulation and social control. URN: urn:nbn:de:0114-fqs070225

The Comparative Analysis of the Efficiency of Coal Liquefaction Technologies

Directory of Open Access Journals (Sweden)

Rudyka Viktor I.

2017-12-01

Full Text Available Organization of production of synthetic liquid fuels (SLF in Ukraine becomes an especially topical and at the same time complex scientific and applied task, taking into consideration criteria of the techno-ecological and economic rationality. The article presents a methodical approach to the comparative analysis of efficiency of the main methods and technologies for the synthetic liquid fuels production and a carried out testing, the results of which allowed to conclude that the most rational is the technology of indirect coal liquefaction based on coal thermal plasma gasification.

A Study on Diffusion Pattern of Technology Convergence: Patent Analysis for Korea

Directory of Open Access Journals (Sweden)

Jae Young Choi

2015-08-01

Full Text Available Technology convergence indicates that technologies of different application areas are converted into a new and common unity of technology. Its range spans from inter-field, whereby technologies are converged between heterogeneous fields in homogeneous sector, to a wider inter-sector, whereby technologies belong to heterogeneous technology sector are converged. This paper determined the definition of technology convergence from previous literature and classified patents into technology category depending on patent information. Furthermore, we empirically measure technology convergence degree based on co-classification analysis and estimate its diffusion trend at the entire technology domain level by using overall 1,476,967 of patents filed to the KIPO (Korean Intellectual Property Office from 1998 to 2010. As a result, potential size and growth rate of technology convergence are varied by both technology and type of technology convergence, i.e., inter-field and inter-sector technology convergence. Diffusion pattern of inter-sector technology convergence appears as the more various form than that of inter-field technology convergence. In a relationship between potential size and growth rate of technology convergence, growth rate of technology convergence is in inverse proportion to potential size of technology convergence in general. That is, the faster the growth rate of technology convergence, the smaller the potential size of technology convergence. In addition, this paper found that technology convergence of the instrument and chemistry sector is actively progressing in both inter-field and inter-sector convergence, while the technologies related to Information and Communication Technology (ICT in electrical engineering sector have relatively mature progress of technology convergence, especially in inter-sector technology convergence.

A network meta-analysis on the effects of information technology application on preoperative knowledge of patients.

Science.gov (United States)

Lai, Yi-Horng

2015-01-01

The application of information technology in health education plan in Taiwan has existed for a long time. The purpose of this study is to explore the relationship between information technology application in health education and patients' preoperative knowledge by synthesizing existing researches that compare the effectiveness of information technology application and traditional instruction in the health education plan. In spite of claims regarding the potential benefits of using information technology in health education plan, results of previous researches were conflicting. This study is carried out to examine the effectiveness of information technology by using network meta-analysis, which is a statistical analysis of separate but similar studies in order to test the pooled data for statistical significance. Information technology application in health education discussed in this study include interactive technology therapy (person-computer), group interactive technology therapy (person-person), multimedia technology therapy and video therapy. The result has shown that group interactive technology therapy is the most effective, followed by interactive technology therapy. And these four therapies of information technology are all superior to the traditional health education plan (leaflet therapy).

The Relative Efficiencies of Research Universities of Science and Technology in China: Based on the Data Envelopment Analysis and Stochastic Frontier Analysis

Science.gov (United States)

Chuanyi, Wang; Xiaohong, Lv; Shikui, Zhao

2016-01-01

This paper applies data envelopment analysis (DEA) and stochastic frontier analysis (SFA) to explore the relative efficiency of China's research universities of science and technology. According to the finding, when talent training is the only output, the efficiency of research universities of science and technology is far lower than that of…

Risk-based systems analysis for emerging technologies: Applications of a technology risk assessment model to public decision making

International Nuclear Information System (INIS)

Quadrel, M.J.; Fowler, K.M.; Cameron, R.; Treat, R.J.; McCormack, W.D.; Cruse, J.

1995-01-01

The risk-based systems analysis model was designed to establish funding priorities among competing technologies for tank waste remediation. The model addresses a gap in the Department of Energy's (DOE's) ''toolkit'' for establishing funding priorities among emerging technologies by providing disciplined risk and cost assessments of candidate technologies within the context of a complete remediation system. The model is comprised of a risk and cost assessment and a decision interface. The former assesses the potential reductions in risk and cost offered by new technology relative to the baseline risk and cost of an entire system. The latter places this critical information in context of other values articulated by decision makers and stakeholders in the DOE system. The risk assessment portion of the model is demonstrated for two candidate technologies for tank waste retrieval (arm-based mechanical retrieval -- the ''long reach arm'') and subsurface barriers (close-coupled chemical barriers). Relative changes from the base case in cost and risk are presented for these two technologies to illustrate how the model works. The model and associated software build on previous work performed for DOE's Office of Technology Development and the former Underground Storage Tank Integrated Demonstration, and complement a decision making tool presented at Waste Management 1994 for integrating technical judgements and non-technical (stakeholder) values when making technology funding decisions

Preliminary analysis of patent trends for magnetic fusion technology

International Nuclear Information System (INIS)

Levine, L.O.; Ashton, W.B.; Campbell, R.S.

1984-02-01

This study presents a preliminary analysis of development trends in magnetic fusion technology based on data from US patents. The research is limited to identification and description of general patent activity and ownership characteristics for 373 patents. The results suggest that more detailed studies of fusion patents could provide useful R and D planning information

Information Technology Systems Vulnerabilities Detecting based on Network’s Traffic Analysis

Directory of Open Access Journals (Sweden)

Dmitry Anatolevich Melnikov

2013-12-01

Full Text Available This paper proposes traffic analysis procedure that is very effective and sometimes single countermeasure on counteracting of network attacks and information leakage channels (hidden control channels. Traffic analysis envisages certain measures to control the security of the Russian Federation information technology infrastructure and, most importantly, to establish the reasons of the occurred and predictable computer incidents.

Renewable energy technology portfolio planning with scenario analysis: A case study for Taiwan

International Nuclear Information System (INIS)

Chen, T.-Y.; Yu, Oliver S.; Hsu, George Jyh-yih; Hsu, Fang-Ming; Sung, W.-N.

2009-01-01

This paper presents the results of a case study of applying a systematic and proven process of technology portfolio planning with the use of scenario analysis to renewable energy developments in Taiwan. The planning process starts with decision values of technology development based on a survey of society leaders. It then generates, based on expert opinions and literature search, a set of major technology alternatives, which in this study include: wind energy, photovoltaic, bio-energy, solar thermal power, ocean energy, and geothermal energy. Through a committee of technical experts with diversified professional backgrounds, the process in this study next constructs three scenarios ('Season in the Sun', 'More Desire than Energy', and 'Castle in the Air') to encompass future uncertainties in the relationships between the technology alternatives and the decision values. Finally, through a second committee of professionals, the process assesses the importance and risks of these alternative technologies and develops a general strategic plan for the renewable energy technology portfolio that is responsive and robust for the future scenarios. The most important contributions of this paper are the clear description of the systematic process of technology portfolio planning and scenario analysis, the detailed demonstration of their application through a case study on the renewable energy development in Taiwan, and the valuable results and insights gained from the application.

Total analysis systems with Thermochromic Etching Discs technology.

Science.gov (United States)

Avella-Oliver, Miquel; Morais, Sergi; Carrascosa, Javier; Puchades, Rosa; Maquieira, Ángel

2014-12-16

A new analytical system based on Thermochromic Etching Discs (TED) technology is presented. TED comprises a number of attractive features such as track independency, selective irradiation, a high power laser, and the capability to create useful assay platforms. The analytical versatility of this tool opens up a wide range of possibilities to design new compact disc-based total analysis systems applicable in chemistry and life sciences. In this paper, TED analytical implementation is described and discussed, and their analytical potential is supported by several applications. Microarray immunoassay, immunofiltration assay, solution measurement, and cell culture approaches are herein addressed in order to demonstrate the practical capacity of this system. The analytical usefulness of TED technology is herein demonstrated, describing how to exploit this tool for developing truly integrated analytical systems that provide solutions within the point of care framework.

Analysis of some potential social effects of four coal technologies

Energy Technology Data Exchange (ETDEWEB)

Walker, C.A.; Gould, L.C.

1980-09-01

This is an analysis of the potential social impacts of four coal technologies: conventional combustion, fluidized-bed combustion, liquifaction, and gasification. Because of their flexibility, and the abundance and relatively low costs of coal, the potential benefits of these technologies would seem to outweigh their potential social costs, both in the intermediate and long term. Nevertheless, the social costs of a coal industry are far more obscure and hard to quantify than the benefits. In general, however, it maybe expected that those technologies that can be deployed most quickly, that provide fuels that can substitute most easily for oil and natural gas, that are the cheapest, and that are the most thermally efficient will minimize social costs most in the intermediate term, while technologies that can guide energy infrastructure changes to become the most compatable with the fuels that will be most easily derived from inexhaustible sources (electricity and hydrogen) will minimize social costs most in the long run. An industry structured to favor eastern over western coal and plant sites in moderate sized communities, which could easily adapt to inexhaustible energy technologies (nuclear or solar) in the future, would be favored in either time period.

VATE: VAlidation of high TEchnology based on large database analysis by learning machine

NARCIS (Netherlands)

Meldolesi, E; Van Soest, J; Alitto, A R; Autorino, R; Dinapoli, N; Dekker, A; Gambacorta, M A; Gatta, R; Tagliaferri, L; Damiani, A; Valentini, V

2014-01-01

The interaction between implementation of new technologies and different outcomes can allow a broad range of researches to be expanded. The purpose of this paper is to introduce the VAlidation of high TEchnology based on large database analysis by learning machine (VATE) project that aims to combine

Development of Ultra-sensitive Laser Spectroscopic Analysis Technology

Energy Technology Data Exchange (ETDEWEB)

Cha, H. K.; Kim, D. H.; Song, K. S. (and others)

2007-04-15

Laser spectroscopic analysis technology has three distinct merits in detecting various nuclides found in nuclear fields. High selectivity originated from small bandwidth of tunable lasers makes it possible to distinguish various kinds of isotopes and isomers. High intensity of focused laser beam makes it possible to analyze ultratrace amount. Remote delivery of laser beam improves safety of workers who are exposed in dangerous environment. Also it can be applied to remote sensing of environment pollution.

Development of Ultra-sensitive Laser Spectroscopic Analysis Technology

International Nuclear Information System (INIS)

Cha, H. K.; Kim, D. H.; Song, K. S.

2007-04-01

Laser spectroscopic analysis technology has three distinct merits in detecting various nuclides found in nuclear fields. High selectivity originated from small bandwidth of tunable lasers makes it possible to distinguish various kinds of isotopes and isomers. High intensity of focused laser beam makes it possible to analyze ultratrace amount. Remote delivery of laser beam improves safety of workers who are exposed in dangerous environment. Also it can be applied to remote sensing of environment pollution

Climatic change, technological, financial and commercial flows : new directions in input-output analysis

International Nuclear Information System (INIS)

Cloutier, L.M.; DeBresson, C.; Dietzenbacher, E.

2004-01-01

This book presents the recent work of prominent economists who used the latest input-output analysis techniques to examine complex and interdependent problems such as global warming, climate change and greenhouse gas reduction. It proposes solutions to Solow's Paradox regarding information and communication technologies and examines the role of technological and financial flows. It also proposes theoretical applications for use in Quebec and Canada. The work of young economists who participated at the Leontief International Input-Output Association was also presented. The book is mainly intended for analysts of economic policies and for young researchers looking for advanced input-output analysis techniques. It offers a useful, realistic and systematic analysis of various issues facing contemporary companies. refs., tabs., figs

Future-oriented technology analysis: Its potential to address disruptive transformations

OpenAIRE

Gagnin, Cristiano; Havas, Attila; Saritas, Ozcan

2011-01-01

This paper reflects on the potential of future-oriented analysis (FTA) to address major change and to support decision-makers and other stakeholders in anticipating and dealing with transformations. It does so by critically reflecting on the selected papers for this special issue as well as on the discussions that took place at the fourth Seville International Conference on Future-oriented Technology Analysis. Considering the potential roles of FTA in enabling a better understanding of co...

Application of analysis technology in nuclear plant

International Nuclear Information System (INIS)

Takaoka, Keiko; Miura, Hiromi; Umeda, Kenji

1996-01-01

Recently, thanks to the rapid improvement of EWS performance, the authors have been able to carry out design evaluation comparatively, easily, utilizing computational fluid dynamics (CFD) technology. The Nuclear Plant Engineering Department has carried out some analyses in the past several years with the main purpose of evaluating the design of nuclear reactor internals. These studies included ''Thermal Hydraulic Analysis for Top Plenum'' and ''Flow Analysis for Lower Plenum''. It is considered to be a special matter in thermal hydraulic analysis of the top plenum that temperature distribution has been estimated with a relatively small number of meshes by means of an imaginary spray nozzle, and in the flow analysis for the lower plenum that flow distribution has been found to change largely, depending on the reactor internals. One of the ways to confirm the safety of nuclear plants, detailed structural analysis, is required for all possible combinations of transient and load conditions during operation. In particular, it is very important to clarify the thermal stress behavior under operating conditions and to evaluate fatigue analysis in accordance with the Code Requirements. However, it is very complicated and it takes a lot of time. A new system was developed which can operate continuously all of the definitions of the analytical model, the analyzation of pressurized thermal and external stress, and editing reports. In this paper, the authors introduce this system and apply it to a pressurized water reactor

Education for Sustainable Development in Technology Education in Irish Schools: A Curriculum Analysis

Science.gov (United States)

McGarr, Oliver

2010-01-01

This paper explores the integration of Education for Sustainable Development (ESD) in technology education and the extent to which it is currently addressed in curriculum documents and state examinations in technology education at post-primary level in Ireland. This analysis is conducted amidst the backdrop of considerable change in technology…

An assistive technology for hearing-impaired persons: analysis, requirements and architecture.

Science.gov (United States)

Mielke, Matthias; Grunewald, Armin; Bruck, Rainer

2013-01-01

In this contribution, a concept of an assistive technology for hearing-impaired and deaf persons is presented. The concept applies pattern recognition algorithms and makes use of modern communication technology to analyze the acoustic environment around a user, identify critical acoustic signatures and give an alert to the user when an event of interest happened. A detailed analysis of the needs of deaf and hearing-impaired people has been performed. Requirements for an adequate assisting device have been derived from the results of the analysis, and have been turned into an architecture for its implementation that will be presented in this article. The presented concept is the basis for an assistive system which is now under development at the Institute of Microsystem Engineering at the University of Siegen.

Task 11 - systems analysis of environmental management technologies

Energy Technology Data Exchange (ETDEWEB)

Musich, M.A.

1997-06-01

A review was conducted of three systems analysis (SA) studies performed by Lockheed Idaho Technologies Company (LITCO) on integrated thermal treatment systems (ITTs) and integrated nonthermal treatment systems (INTSs) for the remediation of mixed low-level waste (MLLW) stored throughout the U.S. Department of Energy (DOE) weapons complex. The review was performed by an independent team led by the Energy & Environment Research Center (EERC), including Science Applications International Corporation (SAIC), the Waste Policy Institute (WPI), and Virginia Tech.

Development of radiochemical property analysis and handling technology of long-lived radionuclide

International Nuclear Information System (INIS)

Park, Jin Ho; Choung, W. M.; Lee, K. I.; Woo, M. S.; Hwang, D. S.; Kim, Y. K.; Choi, Y. D.; Jung, K. C.; Kim, B. H.; Jung, J. Y.

1997-08-01

The goals of this research are completion of detail design of wet type lead cell for radioactive test of partitioning process, and possession of technologies to operate and handle safely process equipments in hot cells. The main contents in this research are as follows: 1) For analysis of radiolysis property of extractants in high level radioactive atmosphere, three extractants (DEHPA, DIDPA, TBP) were irradiated, and degradation phenomena was investigated. 2) For development of radioactive analysis technologies of sample solution, property tests of ion chromatography (NovaPac C-18) and activity measuring tests of Cs-137 with collimator, and design/application tests of collimator were performed. 3) Wet type lead cells (α-γ cell, 2 sets) and auxiliary facilities were designed, and tong manipulator and special tools were designed and fabricated, performed test operation. 4) For getting of MA fuel basic data, a review on process technologies for MA fuel production was performed. (author). 55 refs., 10 tabs., 46 figs

Disciplinary analysis of nuclear engineering education for 21st century style science and technology

International Nuclear Information System (INIS)

Woo, Taeho

2012-01-01

The nuclear engineering education (NEE) is analyzed by the aspect of the advanced science and technology which is characterized by interdisciplinary R and D. The creative innovation is a goal of the education. This work is performed by the conceptual analysis and numerical analysis. Creativity and its innovation are represented as a critical role in the science and technology. So, the education should follow the characteristics of the creativity and its innovation philosophy. Using system dynamics (SD) method, the quantification of the education effect is performed. In addition, the dynamical simulation shows the expected situations of the education usefulness. The final result shows the highest value is 19.11 of Nuclear Industry Innovation. The value increases gradually. So, the education is well developed, as time goes on in this study. In this paper, the education of the nuclear science and technology is modelled for the interdisciplinary promotions in the nuclear industry. The conventional technology has focused on the unit subject and its related technologies. By the way, creativity and its innovation are shown as a critical role in the science and technology. Hence, the education should follow the characteristics of the creativity and its innovation philosophy. Following the characteristics of the 21 st style science and technology, it is necessary to construct the education program of the information technology (IT), nanotechnology (NT), and biotechnology (BT). (orig.)

Application of Ontology Technology in Health Statistic Data Analysis.

Science.gov (United States)

Guo, Minjiang; Hu, Hongpu; Lei, Xingyun

2017-01-01

Research Purpose: establish health management ontology for analysis of health statistic data. Proposed Methods: this paper established health management ontology based on the analysis of the concepts in China Health Statistics Yearbook, and used protégé to define the syntactic and semantic structure of health statistical data. six classes of top-level ontology concepts and their subclasses had been extracted and the object properties and data properties were defined to establish the construction of these classes. By ontology instantiation, we can integrate multi-source heterogeneous data and enable administrators to have an overall understanding and analysis of the health statistic data. ontology technology provides a comprehensive and unified information integration structure of the health management domain and lays a foundation for the efficient analysis of multi-source and heterogeneous health system management data and enhancement of the management efficiency.

Development of HANARO Activation Analysis System and Utilization Technology

Energy Technology Data Exchange (ETDEWEB)

Chung, Y. S.; Moon, J. H.; Cho, H. J. (and others)

2007-06-15

1. Establishment of evaluation system using a data for a neutron activation analysis : Improvement of NAA measurement system and its identification, Development of combined data evaluation code of NAA/PGAA, International technical cooperation project 2. Development of technique for a industrial application of high precision gamma nuclide spectroscopic analysis : Analytical quality control, Development of industrial application techniques and its identification 3. Industrial application research for a prompt gamma-ray activation analysis : Improvement of Compton suppression counting system (PGAA), Development of applied technology using a PGAA system 4. Establishment of NAA user supporting system and KOLAS management : Development and validation of KOLAS/ISO accreditation testing and identification method, Cooperation researches for a industrial application, Establishment of integrated user analytical supporting system, Accomplishment of sample irradiation facility.

Development of HANARO Activation Analysis System and Utilization Technology

International Nuclear Information System (INIS)

Chung, Y. S.; Moon, J. H.; Cho, H. J.

2007-06-01

1. Establishment of evaluation system using a data for a neutron activation analysis : Improvement of NAA measurement system and its identification, Development of combined data evaluation code of NAA/PGAA, International technical cooperation project 2. Development of technique for a industrial application of high precision gamma nuclide spectroscopic analysis : Analytical quality control, Development of industrial application techniques and its identification 3. Industrial application research for a prompt gamma-ray activation analysis : Improvement of Compton suppression counting system (PGAA), Development of applied technology using a PGAA system 4. Establishment of NAA user supporting system and KOLAS management : Development and validation of KOLAS/ISO accreditation testing and identification method, Cooperation researches for a industrial application, Establishment of integrated user analytical supporting system, Accomplishment of sample irradiation facility

Techno-economic and environmental analysis of low carbon energy technologies: Indian perspective

Energy Technology Data Exchange (ETDEWEB)

Saha, Vijay Prakash; Kumar, Rahul; Kumar, Manish; Deswal, Surinder; Chandna, Pankaj

2010-09-15

In this paper, techno-economic and an environmental investigation and analysis of Low Carbon Technologies (LCTs) has been presented, with special emphasis on India. The paper identify, analyze and recommend, on the basis of available and collected / collated information and data, the promising and potential low carbon energy technology options suited to Indian conditions for grid connected power generation. The evaluation criteria adopted include - emission reduction potential, technological feasibility, and economic viability; and on its basis recommend a detailed action plan and strategy for guiding future research and development with a more focused approach considering current Indian policy framework.

Open access for ALICE analysis based on virtualization technology

CERN Document Server

Buncic, P; Schutz, Y

2015-01-01

Open access is one of the important leverages for long-term data preservation for a HEP experiment. To guarantee the usability of data analysis tools beyond the experiment lifetime it is crucial that third party users from the scientific community have access to the data and associated software. The ALICE Collaboration has developed a layer of lightweight components built on top of virtualization technology to hide the complexity and details of the experiment-specific software. Users can perform basic analysis tasks within CernVM, a lightweight generic virtual machine, paired with an ALICE specific contextualization. Once the virtual machine is launched, a graphical user interface is automatically started without any additional configuration. This interface allows downloading the base ALICE analysis software and running a set of ALICE analysis modules. Currently the available tools include fully documented tutorials for ALICE analysis, such as the measurement of strange particle production or the nuclear modi...

Analysis of the concept of nursing educational technology applied to the patient

Directory of Open Access Journals (Sweden)

Aline Cruz Esmeraldo Áfio

2014-04-01

Full Text Available It is aimed at analyzing the concept of educational technology, produced by nursing, applied to the patient. Rodgers´ Evolutionary Method of Concept Analysis was used, identifying background, attributes and consequential damages. 13 articles were selected for analysis in which the background was identified: knowledge deficiency, shortage of nursing professionals' time, to optimize nursing work, the need to achieve the goals of the patients. Attributes: tool, strategy, innovative approach, pedagogical approach, mediator of knowledge, creative way to encourage the acquisition of skills, health production instrument. Consequences: to improve the quality of life, encouraging healthy behavior, empowerment, reflection and link. It emphasizes the importance of educational technologies for the care in nursing, to boost health education activities.

Materials, process, product analysis of coal process technology. Phase I final report

Energy Technology Data Exchange (ETDEWEB)

Saxton, J. C.; Roig, R. W.; Loridan, A.; Leggett, N. E.; Capell, R. G.; Humpstone, C. C.; Mudry, R. N.; Ayres, E.

1976-02-01

The purpose of materials-process-product analysis is a systematic evaluation of alternative manufacturing processes--in this case processes for converting coal into energy and material products that can supplement or replace petroleum-based products. The methodological steps in the analysis include: Definition of functional operations that enter into coal conversion processes, and modeling of alternative, competing methods to accomplish these functions; compilation of all feasible conversion processes that can be assembled from combinations of competing methods for the functional operations; systematic, iterative evaluation of all feasible conversion processes under a variety of economic situations, environmental constraints, and projected technological advances; and aggregative assessments (economic and environmental) of various industrial development scenarios. An integral part of the present project is additional development of the existing computer model to include: A data base for coal-related materials and coal conversion processes; and an algorithmic structure that facilitates the iterative, systematic evaluations in response to exogenously specified variables, such as tax policy, environmental limitations, and changes in process technology and costs. As an analytical tool, the analysis is intended to satisfy the needs of an analyst working at the process selection level, for example, with respect to the allocation of RDandD funds to competing technologies.

Vehicle technology under CO2 constraint: a general equilibrium analysis

International Nuclear Information System (INIS)

Schaefer, Andreas; Jacoby, Henry D.

2006-01-01

A study is presented of the rates of penetration of different transport technologies under policy constraints on CO 2 emissions. The response of this sector is analyzed within an overall national level of restriction, with a focus on automobiles, light trucks, and heavy freight trucks. Using the US as an example, a linked set of three models is used to carry out the analysis: a multi-sector computable general equilibrium model of the economy, a MARKAL-type model of vehicle and fuel supply technology, and a model simulating the split of personal and freight transport among modes. Results highlight the importance of incremental improvements in conventional internal combustion engine technology, and, in the absence of policies to overcome observed consumer discount rates, the very long time horizons before radical alternatives like the internal combustion engine hybrid drive train vehicle are likely to take substantial market share

Coal conversion processes and analysis methodologies for synthetic fuels production. [technology assessment and economic analysis of reactor design for coal gasification

Science.gov (United States)

1979-01-01

Information to identify viable coal gasification and utilization technologies is presented. Analysis capabilities required to support design and implementation of coal based synthetic fuels complexes are identified. The potential market in the Southeast United States for coal based synthetic fuels is investigated. A requirements analysis to identify the types of modeling and analysis capabilities required to conduct and monitor coal gasification project designs is discussed. Models and methodologies to satisfy these requirements are identified and evaluated, and recommendations are developed. Requirements for development of technology and data needed to improve gasification feasibility and economies are examined.

[Technology in nursing care: an analysis from the conceptual framework of Fundamental Nursing].

Science.gov (United States)

da Silva, Rafael Celestino; Ferreira, Márcia de Assunção

2014-01-01

This is a qualitative, field research, whose purpose was to discuss the use of technologies in the nursing care in intensive therapy, taking as reference the theoretical conceptual framework of Fundamental Nursing. Observation and interviews were conducted with twenty two nurses of an intensive therapy unit, with ethnographic analysis. The technology, from the domain of a technological language, provides conditions so that the fundamentals of the nursing care can be effectively incorporated to the nurse practice. The idea of dehumanization linked to the technology can be explained by the way that the nurse ads sense to the things related to his daily life, which will guide his action. The conclusion is that the technologies help to promote life and to rescue the human.

Image Sharing Technologies and Reduction of Imaging Utilization: A Systematic Review and Meta-analysis

Science.gov (United States)

Vest, Joshua R.; Jung, Hye-Young; Ostrovsky, Aaron; Das, Lala Tanmoy; McGinty, Geraldine B.

2016-01-01

Introduction Image sharing technologies may reduce unneeded imaging by improving provider access to imaging information. A systematic review and meta-analysis were conducted to summarize the impact of image sharing technologies on patient imaging utilization. Methods Quantitative evaluations of the effects of PACS, regional image exchange networks, interoperable electronic heath records, tools for importing physical media, and health information exchange systems on utilization were identified through a systematic review of the published and gray English-language literature (2004–2014). Outcomes, standard effect sizes (ESs), settings, technology, populations, and risk of bias were abstracted from each study. The impact of image sharing technologies was summarized with random-effects meta-analysis and meta-regression models. Results A total of 17 articles were included in the review, with a total of 42 different studies. Image sharing technology was associated with a significant decrease in repeat imaging (pooled effect size [ES] = −0.17; 95% confidence interval [CI] = [−0.25, −0.09]; P utilization (pooled ES = 0.20; 95% CI = [0.07, 0.32]; P = .002). For all outcomes combined, image sharing technology was not associated with utilization. Most studies were at risk for bias. Conclusions Image sharing technology was associated with reductions in repeat and unnecessary imaging, in both the overall literature and the most-rigorous studies. Stronger evidence is needed to further explore the role of specific technologies and their potential impact on various modalities, patient populations, and settings. PMID:26614882

URBAN CHILDHOOD ROUTINES MEDIATED BY TECHNOLOGY: A VISUAL ANALYSIS

Directory of Open Access Journals (Sweden)

González-Patiño, Javier

2011-07-01

Full Text Available With the goal of documenting routines in which a technological component had some type of impact and observe the influences of immediate environments, exploring meaning and sense, interviews and some observations and, especially, a series of photographs taken by a young girl about her daily life were collected. The purpose of this article is to foster a critical debate about the social and developmental consequences that have been attributed to changes in the living conditions of contemporary Western urban children. For the analytical approach and the analysis of the data, it was especially important to take into consideration the characteristics of the case study participant, a high social class 12 year old pre-adolescent who lives in a home where a large variety of information and communication technology equipment is at her disposal. The conclusions that are presented mainly revolve around two issues. First, related to the emergence of multimodal communication situations, of increasingly semiotic complexity, promoted by digital practices visible in different styles of mediation in the uses of technologies identified as: "convergence", "divergence" and "accessibility". Second, that these technological practices facilitate transformations in space, whether public, private or virtual, altering the importance that traditionally held by other places in the processes of socialization of urban children. This article is published in Spanish.

Environmental technology strongholds. A business analysis of cluster creation; Miljoeteknologiske styrkepositioner. En erhvervsanalyse af klyngedannelse

Energy Technology Data Exchange (ETDEWEB)

Rosted, J.; Andersen, Torsten; Degn Bertelsen, M. [FORA (Denmark)

2006-08-31

Global focus on environmental responsibility has increased interest in new environmental technology solutions, and environmental technologies will see impressive global growth rates in the coming decades. Environmental technologies make important contributions to solving global environmental challenges. But they are only part of the solution. The development of ground-braking environmental technology solutions should go hand in hand with political decisions on binding environmental goals, public environmental regulation and economic incentives that promote an appropriate behaviour among companies and consumers. The environmental technology market is a highly competitive market that focuses on utilising new and emerging technologies. A large number of Danish companies are active participants in the global competition. There are several examples of government institutions taking an active part in the competition. More and more, new environmental technologies are developed in a binding and strategic collaboration involving companies, universities, research laboratories and government authorities. The level of Danish government authority participation is a critical element. However, this is not the focus of this analysis. The purpose of the analysis is to identify environmental technology areas where Denmark potentially could create new strongholds, if strategic and binding collaboration involving companies, knowledge institutions and government authorities is carried out. The actual level of co-operation should be decided among the relevant stake holders. (au)

Evolutionary analysis of technological innovations: the example of solar photovoltaic and wind energy

International Nuclear Information System (INIS)

Taillant, Pierre

2005-01-01

The objective of this research thesis is to study the building up and the development of technologies for renewable energies considered as environmental radical innovations. In a first part, the author discusses the systemic aspects of innovation and the environmental challenges associated with energy technologies. He examines the main evolutions of energy systems over a long period. In a second part, he addresses innovation incentives in the case of environmental technologies and within the frame of the neo-classical economic theory. The next parts aim at presenting the theoretical framework of the evolutionary analysis of innovation and technical change, and at applying it to the case of technological innovations for renewable energies (photovoltaic and wind energy). World PV market trends are discussed and the technological competition context of this sector is analysed. The evolution of the solar PV technological system in Germany is discussed, as well as the specific case of development of the wind energy technological system in Denmark

Java technology for implementing efficient numerical analysis in intranet

International Nuclear Information System (INIS)

Song, Hee Yong; Ko, Sung Ho

2001-01-01

This paper introduces some useful Java technologies for utilizing the internet in numerical analysis, and suggests one architecture performing efficient numerical analysis in the intranet by using them. The present work has verified it's possibility by implementing some parts of this architecture with two easy examples. One is based on Servlet-Applet communication, JDBC and swing. The other is adding multi-threads, file transfer and Java remote method invocation to the former. Through this work it has been intended to make the base for the later advanced and practical research that will include efficiency estimates of this architecture and deal with advanced load balancing

New Mobile Technologies

DEFF Research Database (Denmark)

Tan, Su-En; Henten, Anders

2006-01-01

This paper takes a look at Clayton Christensen 's theory of disruptive technologies and how Christensen's theory relates to other innovation theories. It also proposes a new layer of analysis to this theory to better link the technology analysis to the market analysis of any given technology...... product. This layer suggests that complementarity and substitutability are important criteria for technologies to be market disruptions or sustaining changes....

Application of 'C.A.R.B. financial methodology' analysis for alternative energy technologies into UK housing

International Nuclear Information System (INIS)

Spanos, Ioannis; Duckers, Les; Holmes, Kenneth L.

2007-01-01

Current energy trends in UK housing are reviewed and then assessed by introducing the 'CARB financial analysis' methodology. CARB is an acronym for 'Carbon Abatement', as it evaluates the potential carbon-dioxide reduction from different technologies; 'Relative', as all the technologies examined are dependant on various primary sources; and 'Balance', as the cost of surplus CO 2 is quantified. According to conventional financial analysis, most of the technologies examined have the potential to provide positive returns on the investments especially for those with an environmentally conscious agenda. Further reduction of up to 30% of most installed alternative energy systems cost is required to compete with an investment in, e.g., a UK pension scheme. Using the 'CARB financial analysis' the cost of reducing CO 2 has been quantified, and compared with the potential cost of climate change impact. Conventional installed solar technologies are not financially attractive both with a pay back period calculations and 'CARB financial analysis' under current market costs and governmental subsidy regimes. Heat recovery technologies could be sensible investments, both in financial and environmental terms under particular assumptions; especially if the investment budget is small. The use of cogeneration technologies provides a financial advantage in the attempt to minimise the cost of climate change impact, as pay back period of such investment could be less than 7 yr, and the cost of CO 2 saved could be two to seven times less than the global damage cost of carbon emissions. (author)

Development of the complex of nuclear-physical methods of analysis for geology and technology tasks in Kazakhstan

International Nuclear Information System (INIS)

Solodukhin, V.; Silachyov, I.; Poznyak, V.; Gorlachev, I.

2016-01-01

The paper describes the development of nuclear-physical methods of analysis and their applications in Kazakhstan for geological tasks and technology. The basic methods of this complex include instrumental neutron-activation analysis, x-ray fluorescent analysis and instrumental γ-spectrometry. The following aspects are discussed: applications of developed and adopted analytical techniques for assessment and calculations of rare-earth metal reserves at various deposits in Kazakhstan, for technology development of mining and extraction from uranium-phosphorous ore and wastes, for radioactive coal gasification technology, for studies of rare metal contents in chromite, bauxites, black shales and their processing products. (author)

An analysis of contingent factors for the detection of strategic relevance in business information technologies

Directory of Open Access Journals (Sweden)

Antonio Paños Álvarez

2005-01-01

Full Text Available Information Technologies are resources able to create competitive advantages for companies. In this analysis, the Resource-based perspective have taken special relevance, because it is argued that this advantages should be identified, reached and maintained. This work is positioned in the analysis of several contingent factors in the process of pointing the possible assesment of these advantages. It is aproaching a portfolio for helping to select what Information Technologies are valuable for what companies and in what activity areas and the study of in what way the sector, the technological innovation profile, the size and the financial capacity of the companies affects this process

Decision analysis for the selection of tank waste retrieval technology

International Nuclear Information System (INIS)

DAVIS, FREDDIE J.; DEWEESE, GREGORY C.; PICKETT, WILLIAM W.

2000-01-01

The objective of this report is to supplement the C-104 Alternatives Generation and Analysis (AGA) by providing a decision analysis for the alternative technologies described therein. The decision analysis used the Multi-Attribute Utility Analysis (MUA) technique. To the extent possible information will come from the AGA. Where data are not available, elicitation of expert opinion or engineering judgment is used and reviewed by the authors of the AGA. A key element of this particular analysis is the consideration of varying perspectives of parties interested in or affected by the decision. The six alternatives discussed are: sluicing; sluicing with vehicle mounted transfer pump; borehole mining; vehicle with attached sluicing nozzle and pump; articulated arm with attached sluicing nozzle; and mechanical dry retrieval. These are evaluated using four attributes, namely: schedule, cost, environmental impact, and safety

Development of safety analysis technology for integral reactor

Energy Technology Data Exchange (ETDEWEB)

Sim, Suk K.; Song, J. H.; Chung, Y. J. and others

1999-03-01

Inherent safety features and safety system characteristics of the SMART integral reactor are investigated in this study. Performance and safety of the SMART conceptual design have been evaluated and confirmed through the performance and safety analyses using safety analysis system codes as well as a preliminary performance and safety analysis methodology. SMART design base events and their acceptance criteria are identified to develop a preliminary PIRT for the SMART integral reactor. Using the preliminary PIRT, a set of experimental program for the thermal hydraulic separate effect tests and the integral effect tests was developed for the thermal hydraulic model development and the system code validation. Safety characteristics as well as the safety issues of the integral reactor has been identified during the study, which will be used to resolve the safety issues and guide the regulatory criteria for the integral reactor. The results of the performance and safety analyses performed during the study were used to feedback for the SMART conceptual design. The performance and safety analysis code systems as well as the preliminary safety analysis methodology developed in this study will be validated as the SMART design evolves. The performance and safety analysis technology developed during the study will be utilized for the SMART basic design development. (author)

Plant phenomics: an overview of image acquisition technologies and image data analysis algorithms.

Science.gov (United States)

Perez-Sanz, Fernando; Navarro, Pedro J; Egea-Cortines, Marcos

2017-11-01

The study of phenomes or phenomics has been a central part of biology. The field of automatic phenotype acquisition technologies based on images has seen an important advance in the last years. As with other high-throughput technologies, it addresses a common set of problems, including data acquisition and analysis. In this review, we give an overview of the main systems developed to acquire images. We give an in-depth analysis of image processing with its major issues and the algorithms that are being used or emerging as useful to obtain data out of images in an automatic fashion. © The Author 2017. Published by Oxford University Press.

Entropy Generation Analysis of Desalination Technologies

Directory of Open Access Journals (Sweden)

John H. Lienhard V

2011-09-01

Full Text Available Increasing global demand for fresh water is driving the development and implementation of a wide variety of seawater desalination technologies. Entropy generation analysis, and specifically, Second Law efficiency, is an important tool for illustrating the influence of irreversibilities within a system on the required energy input. When defining Second Law efficiency, the useful exergy output of the system must be properly defined. For desalination systems, this is the minimum least work of separation required to extract a unit of water from a feed stream of a given salinity. In order to evaluate the Second Law efficiency, entropy generation mechanisms present in a wide range of desalination processes are analyzed. In particular, entropy generated in the run down to equilibrium of discharge streams must be considered. Physical models are applied to estimate the magnitude of entropy generation by component and individual processes. These formulations are applied to calculate the total entropy generation in several desalination systems including multiple effect distillation, multistage flash, membrane distillation, mechanical vapor compression, reverse osmosis, and humidification-dehumidification. Within each technology, the relative importance of each source of entropy generation is discussed in order to determine which should be the target of entropy generation minimization. As given here, the correct application of Second Law efficiency shows which systems operate closest to the reversible limit and helps to indicate which systems have the greatest potential for improvement.

[Effect of 3D printing technology on pelvic fractures:a Meta-analysis].

Science.gov (United States)

Zhang, Yu-Dong; Wu, Ren-Yuan; Xie, Ding-Ding; Zhang, Lei; He, Yi; Zhang, Hong

2018-05-25

To evaluate the effect of 3D printing technology applied in the surgical treatment of pelvic fractures through the published literatures by Meta-analysis. The PubMed database, EMCC database, CBM database, CNKI database, VIP database and Wanfang database were searched from the date of database foundation to August 2017 to collect the controlled clinical trials in wich 3D printing technology was applied in preoperative planning of pelvic fracture surgery. The retrieved literatures were screened according to predefined inclusion and exclusion criteria, and quality evaluation were performed. Then, the available data were extracted and analyzed with the RevMan5.3 software. Totally 9 controlled clinical trials including 638 cases were chosen. Among them, 279 cases were assigned to the 3D printing technology group and 359 cases to the conventional group. The Meta-analysis results showed that the operative time[SMD=-2.81, 95%CI(-3.76, -1.85)], intraoperative blood loss[SMD=-3.28, 95%CI(-4.72, -1.85)] and the rate of complication [OR=0.47, 95%CI(0.25, 0.87)] in the 3D printing technology were all lower than those in the conventional group;the excellent and good rate of pelvic fracture reduction[OR=2.09, 95%CI(1.32, 3.30)] and postoperative pelvic functional restoration [OR=1.94, 95%CI(1.15, 3.28) in the 3D printing technology were all superior to those in the conventional group. 3D printing technology applied in the surgical treatment of pelvic fractures has the advantage of shorter operative time, less intraoperative blood loss and lower rate of complication, and can improve the quality of pelvic fracture reduction and the recovery of postoperative pelvic function. Copyright© 2018 by the China Journal of Orthopaedics and Traumatology Press.

Adapting for uncertainty : a scenario analysis of U.S. technology energy futures

International Nuclear Information System (INIS)

Laitner, J.A.; Hanson, D.A.; Mintzner, I.; Leonard, J.A.

2006-01-01

The pattern of future evolution for United States (US) energy markets is highly uncertain at this time. This article provided details of a study using a scenario analysis technique to investigate key energy issues affecting decision-making processes in the United States. Four scenarios were used to examine the driving forces and critical uncertainties that may shape United States energy markets and the economy for the next 50 years: (1) a reference scenario benchmarked to the 2002 annual energy outlook forecast, (2) abundant and inexpensive supplies of oil and gas, (3) a chaotic future beset with international conflict, faltering new technologies, environmental policy difficulties and slowed economic growth, and (4) a technology-driven market in which a variety of forces converge to reshape the energy sector. Each of the scenarios was quantified using a computable general equilibrium model known as the All Modular Industry Growth Assessment (AMIGA) model. Results suggested that the range of different outcomes for the US is broad. However, energy use is expected to increase in all 4 scenarios. It was observed that the introduction of policies to encourage capital stock turnover and accelerate the commercialization of high efficiency, low-emissions technologies may reduce future primary energy demand. The analysis also showed that lower energy prices may lead to higher economic growth. Policies introduced to improve energy efficiency and accelerate the introduction of new technologies did not appreciably reduce the prospects for economic growth. Results also suggested that lower fossil fuel prices discourage investments in energy efficiency or new technologies and may mask the task of responding to future surprises. It was concluded that an investment path that emphasizes both energy efficiency improvements and advanced energy supply technologies will provide economic growth conditions similar to the implementation of lower energy prices. 11 refs., 1 tab., 2 figs

[Analysis of medical cost of atlantoaxial disorders in patients receiving innovated treatment technologies].

Science.gov (United States)

Wu, Yunxia; Liu, Zhongjun

2016-01-19

To explore the effects of innovated technologies and products on improving outcomes and decreasing medical costs by analyzing a total and subtotal medical costs of patients with atlantoaxial disorders. The medical costs of 1 489 patients with atlantoaxial disorders from Peking University Third Hospital from 2005 to 2014, who received innovated technologies and products treatment were retrospectively analyzed and compared.Descriptive analysis and ANOVA were used for statistical analysis, and SPSS 19.0 was used to analyze data. From 2005 to 2014, under the situation of a general increase in medical cost by 327%, the total medical costs were stable for patients who used innovated technologies and products for treatment, fluctuating from 20 851 in 2005 to 20 878 in 2014; however, the cases of operation increased year by year, from 88 in 2005 to 163 in 2014; the average length of stay decreased from 21 in 2005 to 10 in 2014; the total cases of transfusion were 22 from 2005 to 2014; the safety, stability and feasibility of the innovated technologies and products were illustrated through the decrease of average length of stay, the reduction of bleeding and the significance of outcomes. It is illustrated that the innovated technologies and products not only decrease patients' suffering and medical costs but also are safe, stable and feasible.

Disciplinary analysis of nuclear engineering education for 21{sup st} century style science and technology

Energy Technology Data Exchange (ETDEWEB)

Woo, Taeho [Seoul National Univ. (Korea, Republic of). Dept. of Nuclear Engineering; Yoon, Jaehwan [2G-PEM Engineers, Inc., Seoul (Korea, Republic of)

2012-03-15

The nuclear engineering education (NEE) is analyzed by the aspect of the advanced science and technology which is characterized by interdisciplinary R and D. The creative innovation is a goal of the education. This work is performed by the conceptual analysis and numerical analysis. Creativity and its innovation are represented as a critical role in the science and technology. So, the education should follow the characteristics of the creativity and its innovation philosophy. Using system dynamics (SD) method, the quantification of the education effect is performed. In addition, the dynamical simulation shows the expected situations of the education usefulness. The final result shows the highest value is 19.11 of Nuclear Industry Innovation. The value increases gradually. So, the education is well developed, as time goes on in this study. In this paper, the education of the nuclear science and technology is modelled for the interdisciplinary promotions in the nuclear industry. The conventional technology has focused on the unit subject and its related technologies. By the way, creativity and its innovation are shown as a critical role in the science and technology. Hence, the education should follow the characteristics of the creativity and its innovation philosophy. Following the characteristics of the 21{sup st} style science and technology, it is necessary to construct the education program of the information technology (IT), nanotechnology (NT), and biotechnology (BT). (orig.)

Technology integrated teaching in Malaysian schools: GIS, a SWOT analysis

Directory of Open Access Journals (Sweden)

Habibah Lateh, vasugiammai muniandy

2011-08-01

, articles and proceeding papers. Researches had been continuously done in integrating GIS into Geography syllabus. Thus, this article describes and discusses the barriers and opportunities of implementing GIS in schools with a deep focus of how GIS could enhance the process of teaching and learning geography. The purpose of the study is to determine the effectiveness of GIS in enhancing students’ interest towards the subject. Barriers that might limit the implementation of GIS in schools also briefly discussedin this article. The capabilities of GIS in schools and teaching with GIS is also a part of this article. SWOT analysis is used to find the strength, threaten, opportunities and weakness of GIS to be integrated in Malaysian schools. A content analysis was performed using articles from local and abroad publications regarding technology integration and GIS. Conference proceedings were also analyzed. This content analysis included 35 articles selected from ICT and GIS publication in Malaysia and abroad. The content analysis was done in order to identify the barriers of trying GIS in schools in Malaysia. Thus, this article discusses strengths, weaknesses, opportunities and threatens. The future of GIS in Malaysian Schools has been added into the conclusion.

Technology Management

DEFF Research Database (Denmark)

Pilkington, Alan

2014-01-01

This paper reports a bibliometric analysis (co-citation network analysis) of 10 journals in the management of technology (MOT) field. As well as introducing various bibliometric ideas, network analysis tools identify and explore the concepts covered by the field and their inter-relationships. Spe......This paper reports a bibliometric analysis (co-citation network analysis) of 10 journals in the management of technology (MOT) field. As well as introducing various bibliometric ideas, network analysis tools identify and explore the concepts covered by the field and their inter......-relationships. Specific results from different levels of analysis show the different dimensions of technology management: • Co-word terms identify themes • Journal co-citation network: linking to other disciplines • Co-citation network show concentrations of themes The analysis shows that MOT has a bridging role...

Comparative analysis of the application of different Low Power Wide Area Network technologies in power grid

Science.gov (United States)

Wang, Hao; Sui, Hong; Liao, Xing; Li, Junhao

2018-03-01

Low Power Wide Area Network (LPWAN) technologies developed rapidly in recent years, but the application principle of different LPWAN technologies in power grid is still not clear. This paper gives a comparative analysis of two mainstream LPWAN technologies including NB-IoT and LoRa, and gives an application suggestion of these two LPWAN technologies, which can guide the planning and construction of LPWAN in power grid.

Media analysis of the representations of fusion and other future energy technologies

Energy Technology Data Exchange (ETDEWEB)

Delicado, Ana; Schmidt, Luisa; Pereira, Sergio [Institute of Social Sciences of the University of Lisbon, Av. Prof. Anibal de Bettencourt, 9 1600-189 Lisbon (Portugal); Oltra, Christian; Prades, Ana [CISOT-CIEMAT. Gran Via de les Corts Catalanes 604, 4, 2, 08007 Barcelona (Spain)

2015-07-01

Media representations of energy have a relevant impact on public opinion and public support for investment in new energy sources. Fusion energy is one among several emerging energy technologies that requires a strong public investment on its research and development. This paper aims to characterise and compare the media representations of fusion and other emerging energy technologies in Portugal and in Spain. The emerging energy technologies selected for analysis are wave and tidal power, hydrogen, deep sea offshore wind power, energy applications of nanotechnology, bio-fuels from microalgae and IV generation nuclear fission. This work covered the news published in a selection of newspapers in Portugal and Spain between January 2007 and June 2013. (authors)

Media analysis of the representations of fusion and other future energy technologies

International Nuclear Information System (INIS)

Delicado, Ana; Schmidt, Luisa; Pereira, Sergio; Oltra, Christian; Prades, Ana

2015-01-01

Media representations of energy have a relevant impact on public opinion and public support for investment in new energy sources. Fusion energy is one among several emerging energy technologies that requires a strong public investment on its research and development. This paper aims to characterise and compare the media representations of fusion and other emerging energy technologies in Portugal and in Spain. The emerging energy technologies selected for analysis are wave and tidal power, hydrogen, deep sea offshore wind power, energy applications of nanotechnology, bio-fuels from microalgae and IV generation nuclear fission. This work covered the news published in a selection of newspapers in Portugal and Spain between January 2007 and June 2013. (authors)

Open access for ALICE analysis based on virtualization technology

International Nuclear Information System (INIS)

Buncic, P; Gheata, M; Schutz, Y

2015-01-01

Open access is one of the important leverages for long-term data preservation for a HEP experiment. To guarantee the usability of data analysis tools beyond the experiment lifetime it is crucial that third party users from the scientific community have access to the data and associated software. The ALICE Collaboration has developed a layer of lightweight components built on top of virtualization technology to hide the complexity and details of the experiment-specific software. Users can perform basic analysis tasks within CernVM, a lightweight generic virtual machine, paired with an ALICE specific contextualization. Once the virtual machine is launched, a graphical user interface is automatically started without any additional configuration. This interface allows downloading the base ALICE analysis software and running a set of ALICE analysis modules. Currently the available tools include fully documented tutorials for ALICE analysis, such as the measurement of strange particle production or the nuclear modification factor in Pb-Pb collisions. The interface can be easily extended to include an arbitrary number of additional analysis modules. We present the current status of the tools used by ALICE through the CERN open access portal, and the plans for future extensions of this system. (paper)

Technology Resource, Distribution, and Development Characteristics of Global Influenza Virus Vaccine: A Patent Bibliometric Analysis

Science.gov (United States)

Liu, Long; Yan, Zhe; Tao, Lixin; Guo, Xiuhua; Luo, Yanxia; Yan, Aoshuang

2015-01-01

Influenza virus vaccine (IVV) is a promising research domain that is closely related to global health matters, which has been acknowledged not only by scientists and technology developers, but also by policy-makers. Meanwhile, patents encompass valuable technological information and reflect the latest technological inventions as well as the innovative capability of a nation. However, little research has examined this up-and-coming research field using patent bibliometric method. Thus, this paper (a) designs the technology classification system and search strategy for the identification of IVV; and (b) presents a longitudinal analysis of the global IVV development based on the European Patent Office (EPO) patents. Bibliometric analysis is used to rank countries, institutions, inventors and technology subfields contributing to IVV technical progress. The results show that the global trends of IVV are a multi-developing feature of variety but an uneven technical resource distribution. Although the synthetic peptide vaccine is a comparatively young field, it already demonstrates the powerful vitality and the enormous development space. With the worldwide competition increasing, all nations especially China should be looking to increase devotion, enhance capability and regard effectiveness of technological innovation. PMID:26372160

Technology Resource, Distribution, and Development Characteristics of Global Influenza Virus Vaccine: A Patent Bibliometric Analysis.

Science.gov (United States)

Chen, Ning; Liu, Yun; Cheng, Yijie; Liu, Long; Yan, Zhe; Tao, Lixin; Guo, Xiuhua; Luo, Yanxia; Yan, Aoshuang

2015-01-01

Influenza virus vaccine (IVV) is a promising research domain that is closely related to global health matters, which has been acknowledged not only by scientists and technology developers, but also by policy-makers. Meanwhile, patents encompass valuable technological information and reflect the latest technological inventions as well as the innovative capability of a nation. However, little research has examined this up-and-coming research field using patent bibliometric method. Thus, this paper (a) designs the technology classification system and search strategy for the identification of IVV; and (b) presents a longitudinal analysis of the global IVV development based on the European Patent Office (EPO) patents. Bibliometric analysis is used to rank countries, institutions, inventors and technology subfields contributing to IVV technical progress. The results show that the global trends of IVV are a multi-developing feature of variety but an uneven technical resource distribution. Although the synthetic peptide vaccine is a comparatively young field, it already demonstrates the powerful vitality and the enormous development space. With the worldwide competition increasing, all nations especially China should be looking to increase devotion, enhance capability and regard effectiveness of technological innovation.

Technology Resource, Distribution, and Development Characteristics of Global Influenza Virus Vaccine: A Patent Bibliometric Analysis.

Directory of Open Access Journals (Sweden)

Ning Chen

Full Text Available Influenza virus vaccine (IVV is a promising research domain that is closely related to global health matters, which has been acknowledged not only by scientists and technology developers, but also by policy-makers. Meanwhile, patents encompass valuable technological information and reflect the latest technological inventions as well as the innovative capability of a nation. However, little research has examined this up-and-coming research field using patent bibliometric method. Thus, this paper (a designs the technology classification system and search strategy for the identification of IVV; and (b presents a longitudinal analysis of the global IVV development based on the European Patent Office (EPO patents. Bibliometric analysis is used to rank countries, institutions, inventors and technology subfields contributing to IVV technical progress. The results show that the global trends of IVV are a multi-developing feature of variety but an uneven technical resource distribution. Although the synthetic peptide vaccine is a comparatively young field, it already demonstrates the powerful vitality and the enormous development space. With the worldwide competition increasing, all nations especially China should be looking to increase devotion, enhance capability and regard effectiveness of technological innovation.

Content analysis to locate assistive technology in Queensland's motor injury insurance rehabilitation legislation and guidelines.

Science.gov (United States)

Steel, Emily J

2018-06-08

Reforms to Australia's disability and rehabilitation sectors have espoused the potential of assistive technology as an enabler. As new insurance systems are being developed it is timely to examine the structure of existing systems. This exploratory study examined the policies guiding assistive technology provision in the motor accident insurance sector of one Australian state. Policy documents were analyzed iteratively with set of qualitative questions to understand the intent and interpretation of policies guiding assistive technology provision. Content analysis identified relevant sections and meaningful terminology, and context analysis explored the dominant perspectives informing policy. The concepts and language of assistive technology are not part of the policy frameworks guiding rehabilitation practice in Queensland's motor accident insurance sector. The definition of rehabilitation in the legislation is consistent contemporary international interpretations that focus on optimizing functioning in interaction with the environment. However, the supporting documents are focused on recovery from injuries where decisions are guided by clinical need and affordability. The policies frame rehabilitation in a medical model that assistive technology provision from the rehabilitation plan. The legislative framework provides opportunities to develop and improve assistive technology provision as part of an integrated approach to rehabilitation.

Safety assessment technology on the free drop impact and puncture analysis of the cask for radioactive material transport

International Nuclear Information System (INIS)

Lee, Dew Hey; Lee, Young Shin; Ryu, Chung Hyun; Kim, Hyun Su; Lee, Ho Chul; Hong, Song Jin; Choi, Young Jin; Lee, Jae Hyung; Na, Jae Yun

2001-03-01

In this study, the regulatory condition and analysis condition is analyzed for the free drop and puncture impact analysis to develop the safety assessment technology. Impact analysis is performed with finite element method which is one of the many analysis methods of the shipping cask. LS-DYNA3D and ABAQUS is suitable for the free drop and the puncture impact analysis of the shipping cask. For the analysis model, the KSC-4 that is the shipping cask to transport spent nuclear fuel is investigated. The results of both LS-DYNA3D and ABAQUS is completely corresponded. And The integrity of the shipping cask is verified. Using this study, the reliable safety assessment technology is supplied to the staff. The efficient and reliable regulatory tasks is performed using the standard safety assessment technology

Safety assessment technology on the free drop impact and puncture analysis of the cask for radioactive material transport

Energy Technology Data Exchange (ETDEWEB)

Lee, Dew Hey [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of); Lee, Young Shin; Ryu, Chung Hyun; Kim, Hyun Su; Lee, Ho Chul; Hong, Song Jin; Choi, Young Jin; Lee, Jae Hyung; Na, Jae Yun [Chungnam National Univ., Taejon (Korea, Republic of)

2001-03-15

In this study, the regulatory condition and analysis condition is analyzed for the free drop and puncture impact analysis to develop the safety assessment technology. Impact analysis is performed with finite element method which is one of the many analysis methods of the shipping cask. LS-DYNA3D and ABAQUS is suitable for the free drop and the puncture impact analysis of the shipping cask. For the analysis model, the KSC-4 that is the shipping cask to transport spent nuclear fuel is investigated. The results of both LS-DYNA3D and ABAQUS is completely corresponded. And The integrity of the shipping cask is verified. Using this study, the reliable safety assessment technology is supplied to the staff. The efficient and reliable regulatory tasks is performed using the standard safety assessment technology.

Estimates of oil entering the marine environment in the past decade : GESAMP Working Group 32 project

International Nuclear Information System (INIS)

Etkin, D.S.; Grey, C.; Wells, P.; Koefoed, J.; Nauke, M.; Meyer, T.; Campbell, J.; Reddy, S.

1998-01-01

A meeting of the Joint Group of Experts on the Scientific Aspects of Marine Protection (GESAMP), Working Group 32, was held to discuss a new approach for evaluating available data sources on the input of oil into the marine environment from sea-based activities. GESAMP Working Group on Estimates of Oil Entering the Marine Environment, Sea Based Activities (Working Group 32) will collect and analyze data on oil inputs over the last decade from shipping, offshore and coastal exploration and production, pipelines, atmospheric emissions from sea-based activities, coastal refineries and storage facilities, oil reception facilities, materials disposed of at sea, and natural seepage. The group will compare its oil input estimate model to estimates made by the National Research Council, the International Maritime Organization (IMO), and GESAMP in previous decades, to evaluate the efficacy of IMO conventions and other pollution reduction efforts in the last 10 years. The group will also consider the amounts of oil entering the sea through operational and accidental spillage in relation to the quantities of oil transported by ship and through pipelines, and in relation to offshore and coastal oil production. 7 refs., 4 tabs

The influence of future-oriented technology analysis: addressing the Cassandra challenge

OpenAIRE

JOHNSTON Ron; CAGNIN Cristiano

2011-01-01

This paper is based on a series of interviews with nine leading researchers conducted during the Future-Oriented Technology Analysis International Conference held in Seville on 16–17 October 2008. Analysis of these interviews paints a picture of FTA as an increasingly important approach being adopted in many countries to address the many challenges which are emerging at this time in human history. From this are drawn implications for the community of FTA practitioners. The biggest challenge i...

Assessment of Technologies for the Space Shuttle External Tank Thermal Protection System and Recommendations for Technology Improvement. Part 2; Structural Analysis Technologies and Modeling Practices

Science.gov (United States)

Knight, Norman F., Jr.; Nemeth, Michael P.; Hilburger, Mark W.

2004-01-01

A technology review and assessment of modeling and analysis efforts underway in support of a safe return to flight of the thermal protection system (TPS) for the Space Shuttle external tank (ET) are summarized. This review and assessment effort focuses on the structural modeling and analysis practices employed for ET TPS foam design and analysis and on identifying analysis capabilities needed in the short-term and long-term. The current understanding of the relationship between complex flight environments and ET TPS foam failure modes are reviewed as they relate to modeling and analysis. A literature review on modeling and analysis of TPS foam material systems is also presented. Finally, a review of modeling and analysis tools employed in the Space Shuttle Program is presented for the ET TPS acreage and close-out foam regions. This review includes existing simplified engineering analysis tools are well as finite element analysis procedures.

Probabilistic Latent Semantic Analyses (PLSA in Bibliometric Analysis for Technology Forecasting

Directory of Open Access Journals (Sweden)

Wang Zan

2007-03-01

Full Text Available Due to the availability of internet-based abstract services and patent databases, bibliometric analysis has become one of key technology forecasting approaches. Recently, latent semantic analysis (LSA has been applied to improve the accuracy in document clustering. In this paper, a new LSA method, probabilistic latent semantic analysis (PLSA which uses probabilistic methods and algebra to search latent space in the corpus is further applied in document clustering. The results show that PLSA is more accurate than LSA and the improved iteration method proposed by authors can simplify the computing process and improve the computing efficiency

Mission Benefits Analysis of Logistics Reduction Technologies

Science.gov (United States)

Ewert, Michael K.; Broyan, James Lee, Jr.

2013-01-01

Future space exploration missions will need to use less logistical supplies if humans are to live for longer periods away from our home planet. Anything that can be done to reduce initial mass and volume of supplies or reuse or recycle items that have been launched will be very valuable. Reuse and recycling also reduce the trash burden and associated nuisances, such as smell, but require good systems engineering and operations integration to reap the greatest benefits. A systems analysis was conducted to quantify the mass and volume savings of four different technologies currently under development by NASA s Advanced Exploration Systems (AES) Logistics Reduction and Repurposing project. Advanced clothing systems lead to savings by direct mass reduction and increased wear duration. Reuse of logistical items, such as packaging, for a second purpose allows fewer items to be launched. A device known as a heat melt compactor drastically reduces the volume of trash, recovers water and produces a stable tile that can be used instead of launching additional radiation protection. The fourth technology, called trash-to-gas, can benefit a mission by supplying fuel such as methane to the propulsion system. This systems engineering work will help improve logistics planning and overall mission architectures by determining the most effective use, and reuse, of all resources.

Prehispanic goldwork technology study by PIXE analysis

Energy Technology Data Exchange (ETDEWEB)

Zucchiatti, Alessandro, E-mail: alessandro.zucchiatti@uam.es [Centro de Micro Análisis de Materiales, Universidad Autónoma de Madrid, Calle de Faraday 3, Madrid 28049 (Spain); Climent Font, Aurelio [Centro de Micro Análisis de Materiales, Universidad Autónoma de Madrid, Calle de Faraday 3, Madrid 28049 (Spain); Gutierrez Neira, Patricia Carolina; Perea, Alicia [Centro de Ciencias Humanas y Sociales, CSIC, Calle Albasanz 26-28, Madrid 28037 (Spain); Fernandez Esquivel, Patricia [Fundación Museos, Banco Central de Costa Rica, San José (Costa Rica); Rovira Llorens, Salvador [Museo Arqueológico Nacional, Calle Serrano 13, Madrid 28006 (Spain); Ruvalcaba Sil, José Luis [Instituto de Física, Universidad Nacional Autónoma de Mexico, Mexici DF 28006 (Mexico); Verde, Ana [Museo de América, Avda. de los Reyes Católicos 6, Madrid 28040 (Spain)

2014-08-01

Technological characterization of pre-Hispanic gold metallurgy has still a wide deficit of analytical data. A set of 103 pieces from the so called “Quimbaya’s treasure” (QT) and the “Costa Rica collection” (CRC) of the Museo de America of Madrid were submitted to IBA analysis (PIXE and RBS) at the CMAM in three phases and the metal composition was determined. Only in a limited number of cases, due to the dramatic erosion of the gilded layer, produced by abrasive cleaning methods applied after the discovery and before the seventies, it was possible to determine also the sequence of layers, which gives information on the manufacture technology and the type and purity of the metals. PIXE results are reported and discussed. Data show that the CRC objects have very high gold levels (>80% in weight) while the QT have a more variable composition with significant Cu levels associated to the so called Tumbaga-alloy. In the cases where polishing had a tolerable effect, PIXE (and RBS), point to depletion gilding as a standard finishing process in the Costa Rica production, resulting in a gold rich surface alloy, while the variable composition of the QT objects may well be linked to deliberate colour choice.

Technological Innovations and Consumer Needs: An Analysis of Mobile Communications Market

Directory of Open Access Journals (Sweden)

Norlia Ahmad

2011-12-01

Full Text Available This study combines insights from market diffusion and consumer research to provide an inte-grated framework of mobile communications market in Japan. We base our analysis on data from company interview, focus group discussion and industry reports. Our findings indicate that technology push dominates in the early introduction and consumer needs pull in the maturing stage. Three implications for the marketing area are; first, user needs for mobile communications have evolved from basic mobility and functionality to include aesthetic and experiential benefits, second, innovations of product capabilities co-evolve with user needs, and lead to increases in mobile usage and product-user attachments, and third, in a saturated market, mobile consumption is premised on the utilitarian and hedonic values as perceived by the users. As mobile phone is a universal product, analysis of a saturated market such as Japan provides a deeper understanding of the evolution of technology and consumer in other markets.

Benefits and Pitfalls of Multimedia and Interactive Features in Technology-Enhanced Storybooks : A Meta-Analysis

NARCIS (Netherlands)

Takacs, Zsofia K.; Swart, Elise K.; Bus, Adriana G

2015-01-01

A meta-analysis was conducted on the effects of technology-enhanced stories for young children's literacy development when compared to listening to stories in more traditional settings like storybook reading. A small but significant additional benefit of technology was found for story comprehension

Mobile technology boosts the effectiveness of psychotherapy and behavioral interventions: a meta-analysis.

Science.gov (United States)

Lindhiem, Oliver; Bennett, Charles B; Rosen, Dana; Silk, Jennifer

2015-11-01

We conducted a meta-analysis on the effects of mobile technology on treatment outcome for psychotherapy and other behavioral interventions. Our search of the literature resulted in 26 empirical articles describing 25 clinical trials testing the benefits of smartphone applications, personal digital assistants (PDAs), or text messaging systems either to supplement treatment or substitute for direct contact with a clinician. Overall, mobile technology use was associated with superior treatment outcome across all study designs and control conditions, effect size (ES) = .34, p mobile technology using a rigorous "Treatment" versus "Treatment + Mobile" design, effect sizes were only slightly more modest (ES = .27) and still significant (p mobile technology for the delivery of psychotherapy and other behavioral interventions. © The Author(s) 2015.

An analysis of CDTN performance in the reactors technology area

International Nuclear Information System (INIS)

Pinheiro, R.B.

1985-01-01

The author makes an analysis of CDTN (Centro de Desenvolvimento da Tecnologia Nuclear) performance in the reactors technology area, showing difficulties and failures, but emphasizing the particular competence and capacity acquired in this area, as for example: the capacity in codes and methods are of neutronic calculations and nuclear projects, experimental thermohydraulic program, tests services in components and the others. (C.M.) [pt

Feasibility Analysis of a Type of Soft Firing Technology with Pneumatic Transmission

Institute of Scientific and Technical Information of China (English)

YANG Jun-rong; MI Liang-chuan; ZHAO Hua

2006-01-01

Aimed at solving the conflict between the requirements of reducing gun recoil and increasing muzzle velocity, a new type of soft firing technology with pneumatic transmission is put forward. By mathematical model and instance simulation, the feasibility analysis of this technique is made. The result shows that the soft firing technology with pneumatic transmission can reduce the maximum pressure on the breechblock by 27 % and increase the muzzle velocity by 20 %. The proposed new approach has the significance to the compatibility of power and flexibility.

Research Trends in Technology-Based Learning from 2000 to 2009: A Content Analysis of Publications in Selected Journals

Science.gov (United States)

Hsu, Yu-Chen; Ho, Hsin Ning Jessie; Tsai, Chin-Chung; Hwang, Gwo-Jen; Chu, Hui-Chun; Wang, Chin-Yeh; Chen, Nian-Shing

2012-01-01

This paper provides a content analysis of studies in technology-based learning (TBL) that were published in five Social Sciences Citation Index (SSCI) journals (i.e. "the British Journal of Educational Technology, Computers & Education, Educational Technology Research & Development, Educational Technology & Society, the Journal of Computer…

Interoperability In Multi-Layered Active Defense:The Need For Commonality And Robustness Between Active Defense Weapon Systems

Science.gov (United States)

2016-02-16

into areas where there is no access to maritime platforms. Sea-based interceptor platforms have the ability to intercept targets at each stage of the...argues that the most efficient concept for integrating active defense weapon systems is a multi- layered architecture with redundant intercept ...faster data transfer and will prevent data loss. The need for almost 100% interception successes is increasing as the threat becomes more

Flow cytometric analysis of microbial contamination in food industry technological lines--initial study.

Science.gov (United States)

Józwa, Wojciech; Czaczyk, Katarzyna

2012-04-02

Flow cytometry constitutes an alternative for traditional methods of microorganisms identification and analysis, including methods requiring cultivation step. It enables the detection of pathogens and other microorganisms contaminants without the need to culture microbial cells meaning that the sample (water, waste or food e.g. milk, wine, beer) may be analysed directly. This leads to a significant reduction of time required for analysis allowing monitoring of production processes and immediate reaction in case of contamination or any disruption occurs. Apart from the analysis of raw materials or products on different stages of manufacturing process, the flow cytometry seems to constitute an ideal tool for the assessment of microbial contamination on the surface of technological lines. In the present work samples comprising smears from 3 different surfaces of technological lines from fruit and vegetable processing company from Greater Poland were analysed directly with flow cytometer. The measured parameters were forward and side scatter of laser light signals allowing the estimation of microbial cell contents in each sample. Flow cytometric analysis of the surface of food industry production lines enable the preliminary evaluation of microbial contamination within few minutes from the moment of sample arrival without the need of sample pretreatment. The presented method of fl ow cytometric initial evaluation of microbial state of food industry technological lines demonstrated its potential for developing a robust, routine method for the rapid and labor-saving detection of microbial contamination in food industry.

Technology penetration and capital stock turnover. Lessons from IEA scenario analysis

Energy Technology Data Exchange (ETDEWEB)

Philibert, C. [International Energy Agency IEA, Organisation for Economic Co-operation and Development OECD, Paris (France)

2007-05-15

The aim of this paper is to reflect on the significant differences between the emissions reductions projections in mid-term and long-term scenarios, and to explore their policy implications. It draws mainly on two recent IEA publications: the 2006 World Energy Outlook (WEO), which contains energy and energy-related CO2 projections up to 2030, and the 2006-published Energy Technology Perspectives (ETP), which considers scenarios and strategies up to 2050. The analysis focuses on a comparison of the Alternative Policy Scenario of the 2006 WEO, and the various Accelerated Technology (ACT) Scenarios in the ETP. The next section provides the necessary background on these two publications and their energy-related CO2 emissions by 2030 and 2050, respectively. The third section investigates in some more depth the reasons for the large differences in the amount of emission reductions at these dates. Capital stock turnover and technology maturation lead times, in particular, are identified as primary reasons for the differences. The fourth section suggests several possible policy conclusions that can be drawn from this analysis. They include thought pieces with respect to the action required in the short-term; to the necessity of long-term signals; to the advantages and limitations of short-term targets; and to the opportunities and challenges the international community faces with respect to emission reductions in developing countries.

Integrated intelligent instruments using supercritical fluid technology for soil analysis

International Nuclear Information System (INIS)

Liebman, S.A.; Phillips, C.; Fitzgerald, W.; Levy, E.J.

1994-01-01

Contaminated soils pose a significant challenge for characterization and remediation programs that require rapid, accurate and comprehensive data in the field or laboratory. Environmental analyzers based on supercritical fluid (SF) technology have been designed and developed for meeting these global needs. The analyzers are designated the CHAMP Systems (Chemical Hazards Automated Multimedia Processors). The prototype instrumentation features SF extraction (SFE) and on-line capillary gas chromatographic (GC) analysis with chromatographic and/or spectral identification detectors, such as ultra-violet, Fourier transform infrared and mass spectrometers. Illustrations are given for a highly automated SFE-capillary GC/flame ionization (FID) configuration to provide validated screening analysis for total extractable hydrocarbons within ca. 5--10 min, as well as a full qualitative/quantitative analysis in 25--30 min. Data analysis using optional expert system and neural networks software is demonstrated for test gasoline and diesel oil mixtures in this integrated intelligent instrument approach to trace organic analysis of soils and sediments

The Evolution of U.S. e-Learning Policy: A Content Analysis of the National Education Technology Plans

Science.gov (United States)

Roumell, Elizabeth Anne; Salajan, Florin Daniel

2016-01-01

The purpose of this study was threefold: to expand on existing reviews of 20 years of educational technology policy in the United States, to perform an empirical content analysis of the four National Education Technology Plan (NETP) documents issued by the Department of Education since 1996, and to provide a dialectic analysis of the evolution of…

Performance-Based Technology Selection Filter description report. INEL Buried Waste Integrated Demonstration System Analysis project

Energy Technology Data Exchange (ETDEWEB)

O`Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

1992-05-01

A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

Adherence to Technology-Mediated Insomnia Treatment: A Meta-Analysis, Interviews, and Focus Groups.

Science.gov (United States)

Horsch, Corine; Lancee, Jaap; Beun, Robbert Jan; Neerincx, Mark A; Brinkman, Willem-Paul

2015-09-04

Several technologies have been proposed to support the reduction of insomnia complaints. A user-centered assessment of these technologies could provide insight into underlying factors related to treatment adherence. Gaining insight into adherence to technology-mediated insomnia treatment as a solid base for improving those adherence rates by applying adherence-enhancing strategies. Adherence to technology-mediated sleep products was studied in three ways. First, a meta-analysis was performed to investigate adherence rates in technology-mediated insomnia therapy. Several databases were queried for technology-mediated insomnia treatments. After inclusion and exclusion steps, data from 18 studies were retrieved and aggregated to find an average adherence rate. Next, 15 semistructured interviews about sleep-support technologies were conducted to investigate perceived adherence. Lastly, several scenarios were written about the usage of a virtual sleep coach that could support adherence rates. The scenarios were discussed in six different focus groups consisting of potential users (n=15), sleep experts (n=7), and coaches (n=9). From the meta-analysis, average treatment adherence appeared to be approximately 52% (95% CI 43%-61%) for technology-mediated insomnia treatments. This means that, on average, half of the treatment exercises were not executed, suggesting there is a substantial need for adherence and room for improvement in this area. However, the users in the interviews believed they adhered quite well to their sleep products. Users mentioned relying on personal commitment (ie, willpower) for therapy adherence. Participants of the focus groups reconfirmed their belief in the effectiveness of personal commitment, which they regarded as more effective than adherence-enhancing strategies. Although adherence rates for insomnia interventions indicate extensive room for improvement, users might not consider adherence to be a problem; they believe willpower to be an

Thinking Ahead on Deep Brain Stimulation: An Analysis of the Ethical Implications of a Developing Technology.

Science.gov (United States)

Johansson, Veronica; Garwicz, Martin; Kanje, Martin; Halldenius, Lena; Schouenborg, Jens

2014-01-01

Deep brain stimulation (DBS) is a developing technology. New generations of DBS technology are already in the pipeline, yet this particular fact has been largely ignored among ethicists interested in DBS. Focusing only on ethical concerns raised by the current DBS technology is, albeit necessary, not sufficient. Since current bioethical concerns raised by a specific technology could be quite different from the concerns it will raise a couple of years ahead, an ethical analysis should be sensitive to such alterations, or it could end up with results that soon become dated. The goal of this analysis is to address these changing bioethical concerns, to think ahead on upcoming and future DBS concerns both in terms of a changing technology and changing moral attitudes. By employing the distinction between inherent and noninherent bioethical concerns we identify and make explicit the particular limits and potentials for change within each category, respectively, including how present and upcoming bioethical concerns regarding DBS emerge and become obsolete. Many of the currently identified ethical problems with DBS, such as stimulation-induced mania, are a result of suboptimal technology. These challenges could be addressed by technical advances, while for instance perceptions of an altered body image caused by the mere awareness of having an implant may not. Other concerns will not emerge until the technology has become sophisticated enough for new uses to be realized, such as concerns on DBS for enhancement purposes. As a part of the present analysis, concerns regarding authenticity are used as an example.

Operative and informative nuclear-physical methods for analysis of mineral raw materials and control of technological process

International Nuclear Information System (INIS)

Sattarov, G.S.; Muzafarov, A.M.; Komilov, J.M.; Kadirov, F.; Kist, A.A.

2006-01-01

Full text: In the Navoi region uranium and gold are mined for more than 35 and 30 years, respectively. Various nuclear-chemical and nuclear-physical analysis methods are applied for elemental analysis of gold and uranium bearing ores and technological elements. The nuclear-physical analysis methods have a number of advantages: high sensitivity, capabilities for simultaneous determination of a number of elements, capabilities for automation of analysis process and their expressness at determination of short-living radionuclides. In the given work the comparative characteristics of nuclear-physical methods are shown applied for operative control of gold, uranium and some other rare elements at technological separation processes by sampling and at continuous flow of crushed ore and solution. They are: control of gold sorption leaching; quality control of ore, gravio- and flotation concentrate; x-ray spectral analysis; x-ray energy disperse analysis; radio-indicator and gamma-absorption analysis methods; neutron-activation analysis with using the ampoule neutron sources; elemental analysis at continuous flow of crushed ore and solution; and others. The analytical capabilities of some developed nuclear-physical research methods, which provide information on for geochemical and technological behaviour of gold, uranium and accompanying elements. Like photo-registration of radioluminescence; neutron-activation autoradiography and radio scanning; natural radiation radiometry; alpha, beta and gamma spectrometry of naturally active samples; determination of form in which the elements are present in sewage and underground waters; study of leachability of elements in dynamical and static conditions; determination of time of products being in technological apparatus. Practical examples are presented showing application of the developed methods for the study of geochemical behaviour of main and accompanying elements; for control of the gold, uranium, and some other rare and

Longitudinal Patent Analysis for Nanoscale Science and Engineering: Country, Institution and Technology Field

International Nuclear Information System (INIS)

Huang Zan; Chen Hsinchun; Yip, Alan; Ng, Gavin; Guo Fei; Chen Zhikai; Roco, Mihail C.

2003-01-01

Nanoscale science and engineering (NSE) and related areas have seen rapid growth in recent years. The speed and scope of development in the field have made it essential for researchers to be informed on the progress across different laboratories, companies, industries and countries. In this project, we experimented with several analysis and visualization techniques on NSE-related United States patent documents to support various knowledge tasks. This paper presents results on the basic analysis of nanotechnology patents between 1976 and 2002, content map analysis and citation network analysis. The data have been obtained on individual countries, institutions and technology fields. The top 10 countries with the largest number of nanotechnology patents are the United States, Japan, France, the United Kingdom, Taiwan, Korea, the Netherlands, Switzerland, Italy and Australia. The fastest growth in the last 5 years has been in chemical and pharmaceutical fields, followed by semiconductor devices. The results demonstrate potential of information-based discovery and visualization technologies to capture knowledge regarding nanotechnology performance, transfer of knowledge and trends of development through analyzing the patent documents

Longitudinal Patent Analysis for Nanoscale Science and Engineering: Country, Institution and Technology Field

Science.gov (United States)

Huang, Zan; Chen, Hsinchun; Yip, Alan; Ng, Gavin; Guo, Fei; Chen, Zhi-Kai; Roco, Mihail C.

2003-08-01

Nanoscale science and engineering (NSE) and related areas have seen rapid growth in recent years. The speed and scope of development in the field have made it essential for researchers to be informed on the progress across different laboratories, companies, industries and countries. In this project, we experimented with several analysis and visualization techniques on NSE-related United States patent documents to support various knowledge tasks. This paper presents results on the basic analysis of nanotechnology patents between 1976 and 2002, content map analysis and citation network analysis. The data have been obtained on individual countries, institutions and technology fields. The top 10 countries with the largest number of nanotechnology patents are the United States, Japan, France, the United Kingdom, Taiwan, Korea, the Netherlands, Switzerland, Italy and Australia. The fastest growth in the last 5 years has been in chemical and pharmaceutical fields, followed by semiconductor devices. The results demonstrate potential of information-based discovery and visualization technologies to capture knowledge regarding nanotechnology performance, transfer of knowledge and trends of development through analyzing the patent documents.

Analysis of the need for intermediate and peaking technologies in the year 2000

Energy Technology Data Exchange (ETDEWEB)

Barrager, S.M.; Campbell, G.L.

1980-04-01

This analysis was conducted to assess the impact of load management on the future need for intermediate- and peak-generating technologies (IPTs) such as combustion turbines, pumped storage, and cycling coal plants. There will be a reduced need for IPTs if load-management activities such as time-of-use pricing, together with customer-owned energy-storage devices, hot-water-heater controls, and interruptible service, can economically remove most of the variation from electric-power demands. Therefore, the analysis assesses the need for IPTs in an uncertain future, which will probably include load management and time-differentiated electricity prices. Section 2 provides a condensed description of the models used in the analysis. (Details and data sets are contained in the appendixes.) Results of sensitivities on growth rates, model parameters, and appliance saturations are discussed in Section 3, which also contains the analysis of the potential impacts of customer energy storage, appliance control, and time-of-use pricing. The future need for intermediate and peaking technologies is analyzed in Section 4.

Application of information technology in the process analysis of structural subdivisions of light industry enterprises

Directory of Open Access Journals (Sweden)

Тарана Тахир кызы Мусаева

2016-02-01

Full Text Available The problems of application of information technologies in the process analysis of structural subdivisions of the enterprises of light industry enterprises are considered. For the functional cost analysis in the company it was prepared a computerized structure of the workplace and its principle of operation is described. The functionality of the computerized workplace is tested for textile enterprises. The results showed that the use of information technology has good prospects at the implementation of the quality management system at the textile enterprises

Applications of Modern Analysis Techniques in Searching back Ancient Art Ceramic Technologies

Directory of Open Access Journals (Sweden)

Nguyen Quang Liem

2011-12-01

Full Text Available This report highlights the promising applications of modern analysis techniques such as Scanning Electron Microsopy, X-ray fluorescence, X-ray diffraction, Raman scattering spectroscopy, and thermal expansion measurement in searching back the ancient art ceramics technologies.

Spent Nuclear Fuel Alternative Technology Decision Analysis

International Nuclear Information System (INIS)

Shedrow, C.B.

1999-01-01

The Westinghouse Savannah River Company (WSRC) made a FY98 commitment to the Department of Energy (DOE) to recommend a technology for the disposal of aluminum-based spent nuclear fuel (SNF) at the Savannah River Site (SRS). The two technologies being considered, direct co-disposal and melt and dilute, had been previously selected from a group of eleven potential SNF management technologies by the Research Reactor Spent Nuclear Fuel Task Team chartered by the DOE''s Office of Spent Fuel Management. To meet this commitment, WSRC organized the SNF Alternative Technology Program to further develop the direct co-disposal and melt and dilute technologies and ultimately provide a WSRC recommendation to DOE on a preferred SNF alternative management technology

[Mass spectrometry technology and its application in analysis of biological samples].

Science.gov (United States)

Zhao, Long-Shan; Li, Qing; Guo, Chao-Wei; Chen, Xiao-Hui; Bi, Kai-Shun

2012-02-01

With the excellent merits of wide analytical range, high sensitivity, small sample size, fast analysis speed, good repeatability, simple operation, low mobile phase consumption, as well as its capability of simultaneous isolation and identification, etc, mass spectrometry techniques have become widely used in the area of environmental science, energy chemical industry, biological medicine, and so on. This article reviews the application of mass spectrometry technology in biological sample analysis in the latest three years with the focus on the new applications in pharmacokinetics and bioequivalence, toxicokinetics, pharmacokinetic-pharmacodynamic, population pharmacokinetics, identification and fragmentation pathways of drugs and their metabolites and metabonomics to provide references for further study of biological sample analysis.

Nano market and analysis of technology

International Nuclear Information System (INIS)

2001-10-01

This book gives descriptions of summary of nano technology with meaning, character and field, trend of technical development in domestic, current condition of nano basic research in domestic, trend of technical development in foreign country such as summary, trend of technology by industrial field, machine and metronics, material and process, standard of nano mechanism, scale of market and trend, competitiveness of nano technology of major country and research development system in Japan, Korean company and major countries.

BUSINESS PROCESS MANAGEMENT SYSTEMS TECHNOLOGY COMPONENTS ANALYSIS

Directory of Open Access Journals (Sweden)

Andrea Giovanni Spelta

2007-05-01

Full Text Available The information technology that supports the implementation of the business process management appproach is called Business Process Management System (BPMS. The main components of the BPMS solution framework are process definition repository, process instances repository, transaction manager, conectors framework, process engine and middleware. In this paper we define and characterize the role and importance of the components of BPMS's framework. The research method adopted was the case study, through the analysis of the implementation of the BPMS solution in an insurance company called Chubb do Brasil. In the case study, the process "Manage Coinsured Events"" is described and characterized, as well as the components of the BPMS solution adopted and implemented by Chubb do Brasil for managing this process.

Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the application of photon to industrial technologies, in particular, a hard photon technology was surveyed which uses photon beams of 0.1-200nm in wavelength. Its features such as selective atom reaction, dense inner shell excitation and spacial high resolution by quantum energy are expected to provide innovative techniques for various field such as fine machining, material synthesis and advanced inspection technology. This wavelength region has been hardly utilized for industrial fields because of poor development of suitable photon sources and optical devices. The developmental meaning, usable time and issue of a hard photon reduction lithography were surveyed as lithography in ultra-fine region below 0.1{mu}m. On hard photon analysis/evaluation technology, the industrial use of analysis, measurement and evaluation technologies by micro-beam was viewed, and optimum photon sources and optical systems were surveyed. Prediction of surface and surface layer modification by inner shell excitation, the future trend of this process and development of a vacuum ultraviolet light source were also surveyed. 383 refs., 153 figs., 17 tabs.

Information System Hazard Analysis: A Method for Identifying Technology-induced Latent Errors for Safety.

Science.gov (United States)

Weber, Jens H; Mason-Blakley, Fieran; Price, Morgan

2015-01-01

Many health information and communication technologies (ICT) are safety-critical; moreover, reports of technology-induced adverse events related to them are plentiful in the literature. Despite repeated criticism and calls to action, recent data collected by the Institute of Medicine (IOM) and other organization do not indicate significant improvements with respect to the safety of health ICT systems. A large part of the industry still operates on a reactive "break & patch" model; the application of pro-active, systematic hazard analysis methods for engineering ICT that produce "safe by design" products is sparse. This paper applies one such method: Information System Hazard Analysis (ISHA). ISHA adapts and combines hazard analysis techniques from other safety-critical domains and customizes them for ICT. We provide an overview of the steps involved in ISHA and describe.

Technologies for Teaching and Learning about Box Plots and Statistical Analysis

Science.gov (United States)

Forster, Patricia A.

2007-01-01

This paper analyses technology-based instruction on data-analysis with box plots. Examples of instruction taken from the research literature inform a study of two classes of 17 year-old students (upper secondary) in which the mathematical relationships that their teachers targeted are distinguished as being, or not being, relevant to statistical…

Spent Nuclear Fuel Alternative Technology Decision Analysis

Energy Technology Data Exchange (ETDEWEB)

Shedrow, C.B.

1999-11-29

The Westinghouse Savannah River Company (WSRC) made a FY98 commitment to the Department of Energy (DOE) to recommend a technology for the disposal of aluminum-based spent nuclear fuel (SNF) at the Savannah River Site (SRS). The two technologies being considered, direct co-disposal and melt and dilute, had been previously selected from a group of eleven potential SNF management technologies by the Research Reactor Spent Nuclear Fuel Task Team chartered by the DOE''s Office of Spent Fuel Management. To meet this commitment, WSRC organized the SNF Alternative Technology Program to further develop the direct co-disposal and melt and dilute technologies and ultimately provide a WSRC recommendation to DOE on a preferred SNF alternative management technology.

Energy balance, costs and CO2 analysis of tillage technologies in maize cultivation

International Nuclear Information System (INIS)

Šarauskis, Egidijus; Buragienė, Sidona; Masilionytė, Laura; Romaneckas, Kęstutis; Avižienytė, Dovile; Sakalauskas, Antanas

2014-01-01

To achieve energy independence, Lithuania and other Baltic countries are searching for new ways to produce energy. Maize is a crop that is suitable for both food and forage, as well as for the production of bioenergy. The objective of this work was to assess the energy efficiency of maize cultivation technologies in different systems of reduced tillage. The experimental research and energy assessment was carried out for five different tillage systems: DP (deep ploughing), SP (), DC (deep cultivation), SC (shallow cultivation) and NT (no tillage). The assessment of the fuel inputs for these systems revealed that the greatest amount of diesel fuel (67.2 l ha −1 ) was used in the traditional DP system. The reduced tillage systems required 12–58% less fuel. Lower fuel consumption reduces the costs of technological operations and reduces CO 2 emissions, which are associated with the greenhouse effect. The agricultural machinery used in reduced tillage technologies emits 107–223 kg ha −1 of CO 2 gas into the environment, whereas DP emits 253 kg ha −1 of CO 2 . The energy analysis conducted in this study showed that the greatest total energy input (approximately 18.1 GJ ha −1 ) was associated with the conventional deep-ploughing tillage technology. The energy inputs associated with the reduced-tillage technologies, namely SP, DC and SC, ranged from 17.1 to 17.6 GJ ha −1 . The lowest energy input (16.2 GJ ha −1 ) was associated with the NT technology. Energy efficiency ratios for the various technologies were calculated as a function of the yield of maize grain and biomass. The best energy balance and the highest energy efficiency ratio (14.0) in maize cultivation was achieved with the NT technology. The energy efficiency ratios for DP, SP, DC and SC were 12.4, 13.4, 11.3 and 12.0, respectively. - Highlights: • Energetical and economic analysis of maize cultivation was done. • Reduced tillage technology reduces working time, fuel consumption

A Survey on Quality of Service Monitoring and Analysis of Network of Agricultural Science and Technology Resources

OpenAIRE

Jian , Ma

2014-01-01

International audience; First, current situation on Network of agricultural science and technology resources is described. Then we pay much attention to the quality of service monitoring and analysis system of network resources. And finally, we come to the conclusion that the construction of Quality of service monitoring, analysis of network of agricultural science and technology resources is in great need.

Benefits and Pitfalls of Multimedia and Interactive Features in Technology-Enhanced Storybooks: A Meta-Analysis

Science.gov (United States)

Takacs, Zsofia K.; Swart, Elise K.; Bus, Adriana G.

2015-01-01

A meta-analysis was conducted on the effects of technology-enhanced stories for young children's literacy development when compared to listening to stories in more traditional settings like storybook reading. A small but significant additional benefit of technology was found for story comprehension (g+ = 0.17) and expressive vocabulary (g+ =…

Aqueous nitrate waste treatment: Technology comparison, cost/benefit, and market analysis

Energy Technology Data Exchange (ETDEWEB)

1994-01-01

The purpose of this analysis is to provide information necessary for the Department of Energy (DOE) to evaluate the practical utility of the Nitrate to Ammonia and Ceramic or Glass (NAC/NAG/NAX) process, which is under development in the Oak Ridge National Laboratory. The NAC/NACx/NAX process can convert aqueous radioactive nitrate-laden waste to a glass, ceramic, or grout solid waste form. The tasks include, but are not limited to, the following: Identify current commercial technologies to meet hazardous and radiological waste disposal requirements. The technologies may be thermal or non-thermal but must be all inclusive (i.e., must convert a radionuclide-containing nitrate waste with a pH around 12 to a stable form that can be disposed at permitted facilities); evaluate and compare DOE-sponsored vitrification, grouting, and minimum additive waste stabilization projects for life-cycle costs; compare the technologies above with respect to material costs, capital equipment costs, operating costs, and operating efficiencies. For the NAC/NAG/NAX process, assume aluminum reactant is government furnished and ammonia gas may be marketed; compare the identified technologies with respect to frequency of use within DOE for environmental management applications with appropriate rationale for use; Assess the potential size of the DOE market for the NAC/NAG/NAX process; assess and off-gas issues; and compare with international technologies, including life-cycle estimates.

Aqueous nitrate waste treatment: Technology comparison, cost/benefit, and market analysis

International Nuclear Information System (INIS)

1994-01-01

The purpose of this analysis is to provide information necessary for the Department of Energy (DOE) to evaluate the practical utility of the Nitrate to Ammonia and Ceramic or Glass (NAC/NAG/NAX) process, which is under development in the Oak Ridge National Laboratory. The NAC/NACx/NAX process can convert aqueous radioactive nitrate-laden waste to a glass, ceramic, or grout solid waste form. The tasks include, but are not limited to, the following: Identify current commercial technologies to meet hazardous and radiological waste disposal requirements. The technologies may be thermal or non-thermal but must be all inclusive (i.e., must convert a radionuclide-containing nitrate waste with a pH around 12 to a stable form that can be disposed at permitted facilities); evaluate and compare DOE-sponsored vitrification, grouting, and minimum additive waste stabilization projects for life-cycle costs; compare the technologies above with respect to material costs, capital equipment costs, operating costs, and operating efficiencies. For the NAC/NAG/NAX process, assume aluminum reactant is government furnished and ammonia gas may be marketed; compare the identified technologies with respect to frequency of use within DOE for environmental management applications with appropriate rationale for use; Assess the potential size of the DOE market for the NAC/NAG/NAX process; assess and off-gas issues; and compare with international technologies, including life-cycle estimates

Assessment of technologies for hazardous waste site remediation: Non-treatment technologies and pilot scale facility implementation -- excavation -- storage technology -- safety analysis and review statement

International Nuclear Information System (INIS)

Johnson, H.R.; Overbey, W.K. Jr.; Koperna, G.J. Jr.

1994-02-01

The purpose of this study is to assess the state-of-the-art of excavation technology as related to environmental remediation applications. A further purpose is to determine which of the excavation technologies reviewed could be used by the US Corp of Engineers in remediating contaminated soil to be excavated in the near future for construction of a new Lock and Dam at Winfield, WV. The study is designed to identify excavation methodologies and equipment which can be used at any environmental remediation site but more specifically at the Winfield site on the Kanawha River in Putnam County, West Virginia. A technical approach was determined whereby a functional analysis was prepared to determine the functions to be conducted during the excavation phase of the remediation operations. A number of excavation technologies were identified from the literature. A set of screening criteria was developed that would examine the utility and ranking of the technologies with respect to the operations that needed to be conducted at the Winfield site. These criteria were performance, reliability, implementability, environmental safety, public health, and legal and regulatory compliance. The Loose Bulk excavation technology was ranked as the best technology applicable to the Winfield site. The literature was also examined to determine the success of various methods of controlling fugitive dust. Depending upon any changes in the results of chemical analyses, or prior remediation of the VOCs from the vadose zone, consideration should be given to testing a new ''Pneumatic Excavator'' which removes the VOCs liberated during the excavation process as they outgas from the soil. This equipment however would not be needed on locations with low levels of VOC emissions

Efficacy of computer technology-based HIV prevention interventions: a meta-analysis.

Science.gov (United States)

Noar, Seth M; Black, Hulda G; Pierce, Larson B

2009-01-02

To conduct a meta-analysis of computer technology-based HIV prevention behavioral interventions aimed at increasing condom use among a variety of at-risk populations. Systematic review and meta-analysis of existing published and unpublished studies testing computer-based interventions. Meta-analytic techniques were used to compute and aggregate effect sizes for 12 randomized controlled trials that met inclusion criteria. Variables that had the potential to moderate intervention efficacy were also tested. The overall mean weighted effect size for condom use was d = 0.259 (95% confidence interval = 0.201, 0.317; Z = 8.74, P partners, and incident sexually transmitted diseases. In addition, interventions were significantly more efficacious when they were directed at men or women (versus mixed sex groups), utilized individualized tailoring, used a Stages of Change model, and had more intervention sessions. Computer technology-based HIV prevention interventions have similar efficacy to more traditional human-delivered interventions. Given their low cost to deliver, ability to customize intervention content, and flexible dissemination channels, they hold much promise for the future of HIV prevention.

Terahertz Technology: A Boon to Tablet Analysis

Science.gov (United States)

Wagh, M. P.; Sonawane, Y. H.; Joshi, O. U.

2009-01-01

The terahertz gap has a frequency ranges from ∼0.3 THz to ∼10 THz in the electromagnetic spectrum which is in between microwave and infrared. The terahertz radiations are invisible to naked eye. In comparison with x-ray they are intrinsically safe, non-destructive and non-invasive. Terahertz spectroscopy enables 3D imaging of structures and materials, and the measurement of the unique spectral fingerprints of chemical and physical forms. Terahertz radiations are produced by a dendrimer based high power terahertz source and spectroscopy technologies. It resolves many of the questions left unanswered by complementary techniques, such as optical imaging, Raman and infrared spectra. In the pharmaceutical industries it enables nondestructive, internal, chemical analysis of tablets, capsules, and other dosage forms. Tablet coatings are a major factor in drug bioavailability. Therefore tablet coatings integrity and uniformity are of crucial importance to quality. Terahertz imaging gives an unparalleled certainty about the integrity of tablet coatings and the matrix performance of tablet cores. This article demonstrates the potential of terahertz pulse imaging for the analysis of tablet coating thickness by illustrating the technique on tablets. PMID:20490288

FPGA-based technology for Pulse Height Analysis in nuclear spectrometry system

International Nuclear Information System (INIS)

Andrianiaina, H.; Raoelina Andriambololona; Rajaobelison, J.; Rambolamanana, G.; Roengen, H.

2009-01-01

Facing the rapid technology development applied in nuclear instruments, Madagascar-INSTN has taken measures to estabilish and enhance the national capabilities in their maintenance, calibration, design/modification and repair, which is a key factor in the development of sustainable nuclear technology.The maintenance will be more convenient if all technical resources are made available: this is only possible when the acces to designer side of the instruments is permitted. Research and instrumentation development projects have been developed to support and to fit the local needs: Pulse Height Analysis algorithm is designed within FPGA and VHDL programming technics to build a Multi-Input Multi-Channel Analyzer. Description and measurement results with the MIMCA will be described in the present paper

Implementation of advanced finite element technology in structural analysis computer codes

International Nuclear Information System (INIS)

Kohli, T.D.; Wiley, J.W.; Koss, P.W.

1975-01-01

Advances in finite element technology over the last several years have been rapid and have largely outstripped the ability of general purpose programs in the public domain to assimilate them. As a result, it has become the burden of the structural analyst to incorporate these advances himself. This paper discusses the implementation and extension of specific technological advances in Bechtel structural analysis programs. In general these advances belong in two categories: (1) the finite elements themselves and (2) equation solution algorithms. Improvements in the finite elements involve increased accuracy of the elements and extension of their applicability to various specialized modelling situations. Improvements in solution algorithms have been almost exclusively aimed at expanding problem solving capacity. (Auth.)

Thinking about information work of nuclear science and technology in the age of big data: speaking of the information analysis and research

International Nuclear Information System (INIS)

Chen Tieyong

2014-01-01

Human society is entering a 'PB' (1024TB) the new era as the unit of structured and unstructured data, In the network era, with the development of mobile communications, electronic commerce, the emergence and development of social network. Now, a large-scale production, sharing and application data era is opening. How to explore the value of data, to conquer big data, to get useful information, is an important task of our science and technology information workers. This paper tries to analyze the development of the nuclear science and technology information work from big data obtain, analysis, application. Our analysis and research work for information will be increasingly based on all data and analysis, Instead of random sampling. The data 'sound' is possible. A lot of results of information analysis and research can be expressed quantitatively. We should attach great importance to data collection, careful analysis of the big data. We involves the professional division of labor, but also to cooperation In nuclear science and technology information analysis and research process. In addition, we should strengthen the nuclear science and technology information resource construction, improve Information supply; strengthen the analysis and research of nuclear science and technology information, improve the information service; strengthen information management of nuclear science and technology, pay attention to the security problems and intellectual property rights in information sharing; strengthen personnel training, continuously improve the nuclear science and technology information work efficiency and performance. In the age of big data, our nuclear science and technology information workers shall be based on the information analysis and study as the core, one hand grasping information collection, another hand grasping information service, forge ahead and innovation, continuous improvement working ability of nuclear science and technology information, improve the

Toward a technology of derived stimulus relations: an analysis of articles published in the journal of applied behavior analysis, 1992-2009.

Science.gov (United States)

Rehfeldt, Ruth Anne

2011-01-01

Every article on stimulus equivalence or derived stimulus relations published in the Journal of Applied Behavior Analysis was evaluated in terms of characteristics that are relevant to the development of applied technologies: the type of participants, settings, procedure (automated vs. tabletop), stimuli, and stimulus sensory modality; types of relations targeted and emergent skills demonstrated by participants; and presence versus absence of evaluation of generalization and maintenance. In most respects, published reports suggested the possibility of applied technologies but left the difficult work of technology development to future investigations, suggestions for which are provided.

Microarray technology for major chemical contaminants analysis in food: current status and prospects.

Science.gov (United States)

Zhang, Zhaowei; Li, Peiwu; Hu, Xiaofeng; Zhang, Qi; Ding, Xiaoxia; Zhang, Wen

2012-01-01

Chemical contaminants in food have caused serious health issues in both humans and animals. Microarray technology is an advanced technique suitable for the analysis of chemical contaminates. In particular, immuno-microarray approach is one of the most promising methods for chemical contaminants analysis. The use of microarrays for the analysis of chemical contaminants is the subject of this review. Fabrication strategies and detection methods for chemical contaminants are discussed in detail. Application to the analysis of mycotoxins, biotoxins, pesticide residues, and pharmaceutical residues is also described. Finally, future challenges and opportunities are discussed.

Energy prices, technological knowledge and green energy innovation. A dynamic panel analysis of patent counts

International Nuclear Information System (INIS)

Kruse, Juergen; Wetzel, Heike; Koeln Univ.

2014-01-01

We examine the effect of energy prices and technological knowledge on innovation in green energy technologies. In doing so, we consider both demand-pull effects, which induce innovative activity by increasing the expected value of innovations, and technology-push effects, which drive innovative activity by extending the technological capability of an economy. Our analysis is conducted using patent data from the European Patent Office on a panel of 26 OECD countries over the period 1978-2009. Utilizing a dynamic count data model for panel data, we analyze 11 distinct green energy technologies. Our results indicate that the existing knowledge stock is a significant driver of green energy innovation for all technologies. Furthermore, the results suggest that energy prices have a positive impact on innovation for some but not all technologies and that the e.ect of energy prices and technological knowledge on green energy innovation becomes more pronounced after the Kyoto protocol agreement in 1997.

LC-NMR coupling technology: recent advancements and applications in natural products analysis

NARCIS (Netherlands)

Exarchou, V.; Krucker, M.; Beek, van T.A.; Vervoort, J.J.M.; Gerothanassis, I.P.; Albert, K.

2005-01-01

An overview of recent advances in nuclear magnetic resonance (NMR) coupled with separation technologies and their application in natural product analysis is given and discussed. The different modes of LC-NMR operation are described, as well as how technical improvements assist in establishing LC-NMR

Analysis of Land Subsidence Monitoring in Mining Area with Time-Series Insar Technology

Science.gov (United States)

Sun, N.; Wang, Y. J.

2018-04-01

Time-series InSAR technology has become a popular land subsidence monitoring method in recent years, because of its advantages such as high accuracy, wide area, low expenditure, intensive monitoring points and free from accessibility restrictions. In this paper, we applied two kinds of satellite data, ALOS PALSAR and RADARSAT-2, to get the subsidence monitoring results of the study area in two time periods by time-series InSAR technology. By analyzing the deformation range, rate and amount, the time-series analysis of land subsidence in mining area was realized. The results show that InSAR technology could be used to monitor land subsidence in large area and meet the demand of subsidence monitoring in mining area.

The Analysis of the Relationship between Clean Technology Transfer and Chinese Intellectual Property Countering the Climate Changes

DEFF Research Database (Denmark)

Min, Hao

This report discusses the relationship between the Chinese intellectual property systems which counter with the climate change and the transfer of clean technology, and states how to encourage the developed countries transfer the clean technology to the developing countries according to the relat...... property countering the climate changes; the analysis of current technology transfer modes relating to the climate; the difficulties of Chinese countering climate changes technology transfer and strategic thinking....

SUCCESS CONCEPT ANALYSIS APPLIED TO THE INFORMATION TECHNOLOGY PROJECT MANAGEMENT

Directory of Open Access Journals (Sweden)

Cassio C. Montenegro Duarte

2012-05-01

Full Text Available This study evaluates the concept of success in project management that is applicable to the IT universe, from the classical theory associated with the techniques of project management. Therefore, it applies the theoretical analysis associated to the context of information technology in enterprises as well as the classic literature of traditional project management, focusing on its application in business information technology. From the literature developed in the first part of the study, four propositions were prepared for study which formed the basis for the development of the field research with three large companies that develop projects of Information Technology. The methodology used in the study predicted the development of the multiple case study. Empirical evidence suggests that the concept of success found in the classical literature in project management adjusts to the environment management of IT projects. Showed that it is possible to create the model of standard IT projects in order to replicate it in future derivatives projects, which depends on the learning acquired at the end of a long and continuous process and sponsorship of senior management, which ultimately results in its merger into the company culture.

Smarter elder care? A cost-effectiveness analysis of implementing technology in elder care.

Science.gov (United States)

Aanesen, Margrethe; Lotherington, Ann Therese; Olsen, Frank

2011-09-01

Whereas in most sectors, technology has taken over trivial and labour consuming tasks, this transformation has been delayed in the healthcare sector. Although appropriate technology is available, there is general resistance to substituting 'warm' hands with 'cold' technology. In the future, this may change as the number of elderly people increases relative to the people in the work force. In combination with an increasing demand for healthcare services, there are calls for efforts to increase productivity in the sector. Based on experience data from previous studies on information and communication technology efforts in the healthcare sector, we quantitatively assess the use of smart house technology and video visits in home care. Having identified healthcare providers, hospitals and relatives as the main affected groups, we show that smart house technology is cost-effective, even if only relatives gain from it. Video visits, which have higher implementation costs, demand effects on both relatives and health care providers in order to be a cost-effective tool in home care. As the analysis is purely quantitative, these results need to be complemented with qualitative effects and with more thorough discussions of the ethical, medical and legal aspects of the use of technology in home care.

Fostering Sustainable Energy Entrepreneurship among Students: The Business Oriented Technological System Analysis (BOTSA Program at Eindhoven University of Technology

Directory of Open Access Journals (Sweden)

Mara Wijnker

2015-06-01

Full Text Available The Business Oriented Technological System Analysis (BOTSA program is a new teaching and learning concept developed by Eindhoven University of Technology (the Netherlands with participation from innovative companies in renewable energy. It is designed to stimulate sustainable entrepreneurship among engineering students in this field. The program combines the placement of students in companies to study and contribute to the development and incubation of sustainable energy innovations, with a curriculum at the university designed to support these internships from a scientific perspective. The teaching method assists students in developing a broad system view that enables them to analyze the potential of, and bottlenecks to promising innovations from a realistic business perspective. This empowers students to identify those techno-economic aspects that are critical to innovation success, and advise the entrepreneurs about these aspects. Experience indicates that teachers, students, and entrepreneurs find BOTSA a valuable way of coaching, learning and working. Theoretical support for this method is found in system analysis originating in evolutionary innovation theory in combination with concepts of entrepreneurship, business model generation and sustainable/green innovation.

Application of Artificial Intelligence technology to the analysis and synthesis of reliable software systems

Science.gov (United States)

Wild, Christian; Eckhardt, Dave

1987-01-01

The development of a methodology for the production of highly reliable software is one of the greatest challenges facing the computer industry. Meeting this challenge will undoubtably involve the integration of many technologies. This paper describes the use of Artificial Intelligence technologies in the automated analysis of the formal algebraic specifications of abstract data types. These technologies include symbolic execution of specifications using techniques of automated deduction and machine learning through the use of examples. On-going research into the role of knowledge representation and problem solving in the process of developing software is also discussed.

Construction Process Simulation and Safety Analysis Based on Building Information Model and 4D Technology

Institute of Scientific and Technical Information of China (English)

HU Zhenzhong; ZHANG Jianping; DENG Ziyin

2008-01-01

Time-dependent structure analysis theory has been proved to be more accurate and reliable com-pared to commonly used methods during construction. However, so far applications are limited to partial pe-riod and part of the structure because of immeasurable artificial intervention. Based on the building informa-tion model (BIM) and four-dimensional (4D) technology, this paper proposes an improves structure analysis method, which can generate structural geometry, resistance model, and loading conditions automatically by a close interlink of the schedule information, architectural model, and material properties. The method was applied to a safety analysis during a continuous and dynamic simulation of the entire construction process.The results show that the organic combination of the BIM, 4D technology, construction simulation, and safety analysis of time-dependent structures is feasible and practical. This research also lays a foundation for further researches on building lifecycle management by combining architectural design, structure analy-sis, and construction management.

Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

Techno-economic analysis of an autonomous power system integrating hydrogen technology as energy storage medium

Energy Technology Data Exchange (ETDEWEB)

Tzamalis, G. [Center for Renewable Energy Sources (CRES), RES and Hydrogen Technologies, 19th km Marathon Avenue, GR 19009 Pikermi (Greece); Laboratory of Fuels and Lubricants Technology, School of Chemical Engineering, National Technical University of Athens, 9 Iroon Polytechniou Street, Zografou Campus, 157 80 Athens (Greece); Zoulias, E.I.; Stamatakis, E.; Varkaraki, E. [Center for Renewable Energy Sources (CRES), RES and Hydrogen Technologies, 19th km Marathon Avenue, GR 19009 Pikermi (Greece); Lois, E.; Zannikos, F. [Laboratory of Fuels and Lubricants Technology, School of Chemical Engineering, National Technical University of Athens, 9 Iroon Polytechniou Street, Zografou Campus, 157 80 Athens (Greece)

2011-01-15

Two different options for the autonomous power supply of rural or/and remote buildings are examined in this study. The first one involves a PV - diesel based power system, while the second one integrates RES and hydrogen technologies for the development of a self - sustained power system. The main objective is the replacement of the diesel generator and a comparison between these two options for autonomous power supply. Model simulations of the two power systems before and after the replacement, an optimization of the component sizes and a techno - economic analysis have been performed for the purpose of this study. A sensitivity analysis taking into account future cost scenarios for hydrogen technologies is also presented. The results clearly show that the Cost of Energy Produced (COE) from the PV - hydrogen technologies power system is extremely higher than the PV - diesel power system. However, the adopted PV - hydrogen technologies power system reduces to zero the Green - House Gas (GHG) emissions. Moreover, the sensitivity analysis indicates that COE for the latter system can be further reduced by approximately 50% compared to its initial value. This could be achieved by reducing critical COE's parameters, such as PEM electrolyser and fuel cell capital costs. Hence, a possible reduction on the capital costs of hydrogen energy equipment in combination with emissions reduction mentioned above could make hydrogen - based power systems more competitive. (author)

Rising to the challenges-Reflections on Future-oriented Technology Analysis

OpenAIRE

Georghiou, Luke; Cassingena Harper, Jennifer

2013-01-01

Drawing upon the presentations made at the fourth conference on Future-oriented Technology Analysis, this essay reflects on the implications of the current period of instability and discontinuity for the practice of FTA or foresight. In the past the demand environment for foresight on research and innovation policy favoured application to priority-setting and articulation of demand. New tendencies include a heightened search for breakthrough science and a focus on grand societal challenges. B...

Analysis on complex structure stability under different bar angle with BIM technology

Directory of Open Access Journals (Sweden)

Wang Xiongjue

2016-03-01

Full Text Available Sun Valley, the landmark building of World Expo in Shanghai, which has free surface with single-layer reticulated shell structure, is a typical complex structure. CAD/CAM integrated information system to design is used for the complex structure; however, it is a very rigorous process to be used widely. The relevant technology of the Sun Valley is not open to the public at present, so we try to use BIM technology to model the Sun Valley, including architecture modelling and structure analysis. By analysis of the Sun Valley structure using this method, it is proved that the problems in modelling may be solved by writing some script codes in Rhino software and the stability of the model can also be analyzed. The new approach is viable and effective in combination with different softwares such as Rhino, Revit, and Midas in solution of the complex shaped surfaces’ structure for modelling and calculation.

Integration of hydrogen energy technologies in stand-alone power systems analysis of the current potential for applications

International Nuclear Information System (INIS)

Zoulias, E.I.; Lymberopoulos, N.; Tsoutsos, T.; Glockner, R.; Mydske, H.J.; Vosseler, I.; Gavalda, O.; Taylor, P.

2006-01-01

The European study entitled: 'Market Potential Analysis for Introduction of Hydrogen Energy Technology in Stand-Alone Power Systems (H-SAPS)' aimed to establish a broad understanding of the market potential for H-SAPS and provide a basis for promoting in wide scale new technological applications. The scope of the study was limited to small and medium installations, up to a few hundred kW power rating and based on RE as the primary energy source. The potential for hydrogen technology in SAPS was investigated through an assessment of the technical potential for hydrogen, the market analysis and the evaluation of external factors. The results are mostly directed towards action by governments and the research community but also industry involvement is identified. The results include targeted market research, establishment of individual cost targets, regulatory changes to facilitate alternative grid solutions, information and capacity building, focused technology research and bridging the technology gaps. (author)

Basis of combined Pinch Technology and exergy analysis and its application to energy industry in Mexico

International Nuclear Information System (INIS)

Rodriguez T, M.A.; Rangel D, H.

1994-01-01

The energy industry scheme in Mexico has an enormous potential to do re adaptations with the intention of increase the efficiency in the use of energy. One of the most modern engineering tools to make such re adaptations consist in a suitable combination of analysis of exergy and Pinch technology. In this work, the basis of this new technology are presented, besides the potential areas of application in the Mexican energy industry are also considered. So then, it is shown that a combined analysis of exergy and Pinch technology (ACETP) is useful to analyze, in a conceptual and easy to understand way, systems that involve heat and power. The potential areas of application of ACETP are, cryogenic processes, power generation systems and cogeneration systems. (Author)

Development of systems of analysis in industrial processes with XRF. A technology transfer alternative

International Nuclear Information System (INIS)

Galvez, Juan; Poblete, Victor

1999-01-01

The FRX Laboratory's experience in developing a unit of analysis by excitation with a radioisotope source is described, with a discussion of its advantages, limitations, types of existing units in the market, use, values and state-of-the-art. The evolution of mining and metallurgical processes has led to the development of new technologies that provide quick and precise control of control and analysis operations, avoiding loss of raw material, chemical reagents, waste of materials and time, to obtain a better quality and purer product. The system developed by the FRX Laboratory is relatively low cost compared to other equipment that is available in the market, and it focuses on single element analysis in hydrometallurgical processes. This system uses a NaI (T1) detector with a beryllium window, related electronics, monitor and printer, which controls the operation automatically using an adequate program for taking samples, measuring, analysis, printing results, changing samples, etc. The sampling is continuous, so it does not have to be taken or prepared chemically. This system can extrapolate to other more complex ones, using new kinds of detectors with higher resolution, more modern electronics, and new multichannel cards. The development of this kind of equipment in Chile means that dependence on foreign technology can be avoided by replacing expensive imported equipment, creating our own technology and transferring it to the domestic market, and even generating income by exporting these units and opening new development prospects (au)

EARLY DETECTION OF NEAR-FIELD TSUNAMIS USING UNDERWATER SENSOR NETWORKS

Directory of Open Access Journals (Sweden)

L. E. Freitag

2012-01-01

Full Text Available We propose a novel approach for near-field tsunami detection, specifically for the area near the city of Padang, Indonesia. Padang is located on the western shore of Sumatra, directly across from the Mentawai segment of the Sunda Trench, where accumulated strain has not been released since the great earthquake of 1797. Consequently, the risk of a major tsunamigenic earthquake on this segment is high. Currently, no ocean-bottom pressure sensors are deployed in the Mentawai basin to provide a definitive tsunami warning for Padang. Timely warnings are essential to initiate evacuation procedures and minimize loss of human life. Our approach augments existing technology with a network of underwater sensors to detect tsunamis generated by an earthquake or landslide fast enough to provide at least 15 minutes of warning. Data from the underwater sensor network would feed into existing decision support systems that accept input from land and sea-based sensors and provide warning information to city and regional authorities.

Certified Integral Programme Management for R&D European Projects in Marine Sciences

Science.gov (United States)

Castro, Ayoze; Hildebrandt, silvia; Quevedo, Eduardo; Meme, Simone; Loustau, Josefina; Hernandez-Brito, Joaquin; Llinás, Octavio

2017-04-01

The Oceanic Platform of the Canary Islands (PLOCAN) is a multipurpose service centre with novel land-based and sea-based infrastructures to support research, technology development an innovation in the marine and maritime sectors. Its mission is to promote long-term observation and sustainability of the ocean, providing a cost-effective combination of services, such as observatories, test site, base for underwater vehicles, training and innovation hub. PLOCAN has been actively participating in the European Commission Blue Growth strategy to support sustainable growth in the marine and maritime sectors as a whole. As a result, during the period 2014-2016, there has been a particularly high increase in the number of projects in execution in the organization. In order to successfully manage this situation, the development of a robust, effective and certified programme management system has turned out to be essential. To do so, an integral management methodology was specifically created and has successfully passed the ISO 9001:2008 certification in 2016.

Research and Development Strategy in Biological Technologies: A Patent Data Analysis of Japanese Manufacturing Firms

Directory of Open Access Journals (Sweden)

Hidemichi Fujii

2016-04-01

Full Text Available Biological technology allows us to invent new medical approaches, create effective food production methods and reserves and develop new materials for industrial production. There is a diversity of biological technology types, and different technologies have different priorities for invention. This study examines the factors that are important for the invention of biology-related technologies in Japan using patent application data and a decomposition analysis framework. As the results show, patent applications related to biochemistry and biotechnology increased until 1995 because of the expanded scale of R&D activities and the high priority assigned to biological technology. However, the number of patent applications stagnated after 1995, because the importance of biochemistry, especially waste-gas treatment technologies, decreased. Additionally, patent applications for medicines and disease-related technologies increased rapidly from 1971 to 1995. The primary determinant of rapid growth is an increase in research priority, especially among firms in the chemical industry whose technologies are related to supplemental foods and foods with health-promoting benefits. Finally, patent applications involving foodstuff- and agriculture-related technologies increased from 1971 to 1995 due to increased R&D and the increased priority of biological technology.

Making technology public

DEFF Research Database (Denmark)

Winthereik, Brit Ross; Johannsen, Nis; Strand, Dixi Louise

2008-01-01

the transformative potential of the portal presentation for reconfiguring relationships between citizens, health care systems, and information and communication technology (ICT). The analysis is guided by Haraway's notion of diffraction. Findings – The analysis demonstrates the particular way in which the user...... secure the future of the technology and organisation behind it. Research limitations/implications – The paper extends the script metaphor beyond a limited designer-technology-user configuration and argues that scripts in the paraphernalia of technologies also can and should be “de......Purpose – Through an analysis of a demonstration video presenting a new national e-health portal, this paper aims to explore the assumptions and limitations of the concept of “script” and suggests a different approach to analysing the moral order of technology design. Design...

Establishment of Safety Analysis System and Technology for CANDU Reactors

International Nuclear Information System (INIS)

Park, Joo Hwan; Rhee, B. W.; Min, B. J.; Kim, H. T.; Kim, W. Y.; Yoon, C.; Chun, J. S.; Cho, M. S.; Jeong, J. Y.; Kang, H. S.

2007-06-01

The following 4 research items have been studied to establish a CANDU safety analysis system and to develop the relevant elementary technology for CANDU reactors. First, to improve and validate the CANDU design and operational safety analysis codes, the CANDU physics cell code WIMS-CANDU was improved, and validated, and an analysis of the moderator subcooling and pressure tube integrity has been performed for the large break LOCAs without ECCS. Also a CATHENA model and a CFD model for a post-blowdown fuel channel analysis have been developed and validated against two high temperature thermal-chemical experiments, CS28-1 and 2. Second, to improve the integrated operating system of the CANDU safety analysis codes, an extension has been made to them to include the core and fuel accident analyses, and a web-based CANDU database, CANTHIS version 2.0 was completed. Third, to assess the applicability of the ACR-7 safety analysis methodology to CANDU-6 the ACR-7 safety analysis methods were reviewed and the safety analysis methods of ACR-7 applicable to CANDU-6 were recommended. Last, to supplement and improve the existing CANDU safety analysis procedures, detailed analysis procedures have been prepared for individual accident scenarios. The results of this study can be used to resolve the CANDU safety issues, to improve the current design and operational safety analysis codes, and to technically support the Wolsong site to resolve their problems

Comparative Analysis of Pedagogical Technologies in the Context of Future Agrarians' Multicultural Education in the USA

Science.gov (United States)

Kravets, Ruslan

2015-01-01

In the article the comparative analysis of pedagogical technologies in the USA has been carried out in the context of future agrarians' multicultural education. The essence of traditional and innovative pedagogical technologies and the peculiarities of their realization at higher educational establishments have been viewed. The expediency of…

Technology and Research Requirements for Combating Human Trafficking: Enhancing Communication, Analysis, Reporting, and Information Sharing

Energy Technology Data Exchange (ETDEWEB)

Kreyling, Sean J.; West, Curtis L.; Olson, Jarrod

2011-03-17

DHS’ Science & Technology Directorate directed PNNL to conduct an exploratory study on the domain of human trafficking in the Pacific Northwest in order to examine and identify technology and research requirements for enhancing communication, analysis, reporting, and information sharing – activities that directly support efforts to track, identify, deter, and prosecute human trafficking – including identification of potential national threats from smuggling and trafficking networks. This effort was conducted under the Knowledge Management Technologies Portfolio as part of the Integrated Federal, State, and Local/Regional Information Sharing (RISC) and Collaboration Program.

Analysis on Pollution Factors in Asparagus Production and Research on Safety Production Technology

OpenAIRE

Ma, Liping; Hao, Bianqing; Qiao, Xiongwu

2013-01-01

Based on the analysis on the infection degree, infection law and influencing factors of the main diseases on asparagus and the analysis on the pollution factors in asparagus production such as blind pesticide use, atmospheric pollution and acid rain, the pollution of soil and fertilizer, this article proposes asparagus safety production technologies which include the selection of disease-resistant variety and suitable planting field, scientific and reasonable disease control, balanced fertili...

ANALYSIS OF AMMONIA REMOVAL FROM WASTEWATER MARKET: FEASIBILITY OF SALTWORKS INTRODUCING NEW TECHNOLOGY

OpenAIRE

Nicholas Roch

2015-01-01

This paper presents an analysis of the market for removing ammonia from wastewater to assess its attractiveness and confirm the feasibility of Saltworks developing and launching its promising new ammonia removal technology. After an introduction, the paper qualitatively analyses the opportunity for Saltworks to enter the ammonia removal market using a SWOT analysis. The author’s personal experiences, Saltworks documentation, and interviews with Saltworks staff provide insight into the company...

Information technology portfolio in supply chain management using factor analysis

Directory of Open Access Journals (Sweden)

Ahmad Jaafarnejad

2013-11-01

Full Text Available The adoption of information technology (IT along with supply chain management (SCM has become increasingly a necessity among most businesses. This enhances supply chain (SC performance and helps companies achieve the organizational competitiveness. IT systems capture and analyze information and enable management to make decisions by considering a global scope across the entire SC. This paper reviews the existing literature on IT in SCM and considers pertinent criteria. Using principal component analysis (PCA of factor analysis (FA, a number of related criteria are divided into smaller groups. Finally, SC managers can develop an IT portfolio in SCM using mean values of few extracted components on the relevance –emergency matrix. A numerical example is provided to explain details of the proposed method.

Analysis of Engineering Content within Technology Education Programs

Science.gov (United States)

Fantz, Todd D.; Katsioloudis, Petros J.

2011-01-01

In order to effectively teach engineering, technology teachers need to be taught engineering content, concepts, and related pedagogy. Some researchers posit that technology education programs may not have enough content to prepare technology teachers to teach engineering design. Certain technology teacher education programs have responded by…

Analysis on Dynamic Decision-Making Model of the Enterprise Technological Innovation Investment under Uncertain Environment

Directory of Open Access Journals (Sweden)

Yong Long

2012-01-01

Full Text Available Under the environment of fuzzy factors including the return of market, performance of product, and the demanding level of market, we use the method of dynamic programming and establish the model of investment decision, in technology innovation project of enterprise, based on the dynamic programming. Analysis of the influence caused by the changes of fuzzy uncertainty factors to technological innovation project investment of enterprise.

Task 11 - systems analysis of environmental management technologies. Topical report

International Nuclear Information System (INIS)

Musich, M.A.

1997-06-01

A review was conducted of three systems analysis (SA) studies performed by Lockheed Idaho Technologies Company (LITCO) on integrated thermal treatment systems (ITTs) and integrated nonthermal treatment systems (INTSs) for the remediation of mixed low-level waste (MLLW) stored throughout the U.S. Department of Energy (DOE) weapons complex. The review was performed by an independent team led by the Energy ampersand Environment Research Center (EERC), including Science Applications International Corporation (SAIC), the Waste Policy Institute (WPI), and Virginia Tech

The FSM technology -- Operational experience and improvements in local corrosion analysis

International Nuclear Information System (INIS)

Stroemmen, R.; Horn, H.; Gartland, P.O.; Wold, K.

1996-01-01

FSM (Field Signature Method) is a non-intrusive monitoring technique based on a patented principle, developed for the purpose of detection and monitoring of both general and localized corrosion, erosion and cracking in steel and metal structures, piping systems and vessels. Since 1991 FSM has been used for a wide range of applications e.g. for buried and open pipelines, process piping offshore, subsea pipelines and flowlines, applications in the nuclear power industry and in materials research in general. This paper describes typical applications of the FSM technology, and presents operational experience from some of the landbased and subsea installations. The paper also describes recent enhancements in the FSM technology and in the analysis of FSM readings, allowing for monitoring and detailed quantification of pitting and mesa corrosion, and of corrosion in welds

Erbium Laser Technology vs Traditional Drilling for Caries Removal: A Systematic Review with Meta-Analysis.

Science.gov (United States)

Tao, Siying; Li, Lan; Yuan, He; Tao, Sibei; Cheng, Yiming; He, Libang; Li, Jiyao

2017-12-01

The study aimed to assess the efficacy of erbium laser technology compared with traditional drilling for caries removal. A systematic search was conducted through Medline via PubMed, Embase, Cochrane databases, CNKI till December 2016. Randomised controlled trials, quasi-randomized controlled trials, or controlled clinical trials with data comparing the efficacy of erbium laser technology versus traditional drilling for caries removal were included. Fourteen studies were selected in our meta-analysis. Erbium laser technology showed an increased time when removing caries compared with drilling (mean difference: 3.48, 95% confidence interval: 1.90-5.06, P drilling with regard to restoration loss, pulpal vitality, and postoperative sensitivity. Erbium laser technology showed an increased time for cavity preparation compared with traditional drilling. However, erbium laser technology reduced the requirement for local anesthesia. There was no significant difference between erbium laser technology and traditional drilling regarding restoration loss, pulpal vitality, and postoperative sensitivity. Copyright © 2017 Elsevier Inc. All rights reserved.

Exploring the Reduction of Fuel Consumption for Ship-to-Shore Connectors of the Marine Expeditionary Brigade

Science.gov (United States)

2013-12-01

include the Command Element (CE), the Aviation Combat Element (ACE), the Ground Combat Element ( GCE ), and the Combat Service Support Element (CSSE) (from...35 Figure 9. The upper level functional architecture for EW12 shows the three primary functions of F1-Assemble the Seabase, F2...Function F2-Perform Assault is decomposed to obtain the lower level specific functions. From this decomposition, the sub-function of F2.2- Gain Entry

Evaluation of the U.S. strategic nuclear triad. Hearing before the Committee on Governmental Affairs, United States Senate, One Hundred Third Congress, First Session, June 10, 1993

International Nuclear Information System (INIS)

Anon.

1994-01-01

These hearings address the issue of the US nuclear deterrent bassed on a triad of land-based, air-based, and sea-based ability to deliver nuclear weapons and how the decisions about such a policy were made. The goal is to apply this information to consideration about new weapons systems. Testimony is from the following: Chelimsky, General Accounting Office; Perry, Deputy Secretary of Defense. Written testimony and documents comprise a large part of the hearing

Health technology management: a database analysis as support of technology managers in hospitals.

Science.gov (United States)

Miniati, Roberto; Dori, Fabrizio; Iadanza, Ernesto; Fregonara, Mario M; Gentili, Guido Biffi

2011-01-01

Technology management in healthcare must continually respond and adapt itself to new improvements in medical equipment. Multidisciplinary approaches which consider the interaction of different technologies, their use and user skills, are necessary in order to improve safety and quality. An easy and sustainable methodology is vital to Clinical Engineering (CE) services in healthcare organizations in order to define criteria regarding technology acquisition and replacement. This article underlines the critical aspects of technology management in hospitals by providing appropriate indicators for benchmarking CE services exclusively referring to the maintenance database from the CE department at the Careggi Hospital in Florence, Italy.

Testing of technology readiness index model based on exploratory factor analysis approach

Science.gov (United States)

Ariani, AF; Napitupulu, D.; Jati, RK; Kadar, JA; Syafrullah, M.

2018-04-01

SMEs readiness in using ICT will determine the adoption of ICT in the future. This study aims to evaluate the model of technology readiness in order to apply the technology on SMEs. The model is tested to find if TRI model is relevant to measure ICT adoption, especially for SMEs in Indonesia. The research method used in this paper is survey to a group of SMEs in South Tangerang. The survey measures the readiness to adopt ICT based on four variables which is Optimism, Innovativeness, Discomfort, and Insecurity. Each variable contains several indicators to make sure the variable is measured thoroughly. The data collected through survey is analysed using factor analysis methodwith the help of SPSS software. The result of this study shows that TRI model gives more descendants on some indicators and variables. This result can be caused by SMEs owners’ knowledge is not homogeneous about either the technology that they are used, knowledge or the type of their business.

Assessment of technologies for hazardous waste site remediation: Non-treatment technologies and pilot scale facility implementation -- excavation -- storage technology -- safety analysis and review statement. Final report

Energy Technology Data Exchange (ETDEWEB)

Johnson, H.R.; Overbey, W.K. Jr.; Koperna, G.J. Jr.

1994-02-01

The purpose of this study is to assess the state-of-the-art of excavation technology as related to environmental remediation applications. A further purpose is to determine which of the excavation technologies reviewed could be used by the US Corp of Engineers in remediating contaminated soil to be excavated in the near future for construction of a new Lock and Dam at Winfield, WV. The study is designed to identify excavation methodologies and equipment which can be used at any environmental remediation site but more specifically at the Winfield site on the Kanawha River in Putnam County, West Virginia. A technical approach was determined whereby a functional analysis was prepared to determine the functions to be conducted during the excavation phase of the remediation operations. A number of excavation technologies were identified from the literature. A set of screening criteria was developed that would examine the utility and ranking of the technologies with respect to the operations that needed to be conducted at the Winfield site. These criteria were performance, reliability, implementability, environmental safety, public health, and legal and regulatory compliance. The Loose Bulk excavation technology was ranked as the best technology applicable to the Winfield site. The literature was also examined to determine the success of various methods of controlling fugitive dust. Depending upon any changes in the results of chemical analyses, or prior remediation of the VOCs from the vadose zone, consideration should be given to testing a new ``Pneumatic Excavator`` which removes the VOCs liberated during the excavation process as they outgas from the soil. This equipment however would not be needed on locations with low levels of VOC emissions.

An analysis of communications and networking technologies for the smart grid

Energy Technology Data Exchange (ETDEWEB)

Garcia Hernandez, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2013-03-01

The Smart Grid concept has been foreseen as the integration of the electrical generation, transmission and distribution network and the data communications network. Although, traditional communications interfaces, protocols and standards has been used in the electrical grid in an isolated manner, modern communications network is considered as the fundamental enabling technology within the future Smart Grid. Modern communications technologies, protocol architectures and standards can help to build a common communications network infrastructure for data transport between customer premises, power substations, and power distribution systems, utility control centers and utility data centers. The Smart Grid will support traditional applications such as SCADA, distribution automation (DA), energy management systems (EMS), demand site management (DSM) and automatic meter reading (AMR), etc., as well as new applications like advanced metering infrastructure (AMI), substation automation (SA), microgrids, distributed generation, grid monitoring and control, data storage and analysis, among others. To make this possible, the Smart Grid requires a two-way wide area communications network between different dispersed areas, from generation, to distribution to consumer premises. In fact, it will consist of many different types of communications networks such as wide area networks, local area network, home area networks, etc. This requires a new architectural approach to implement a common communications infrastructure that provides the reliability, scalability, security and interoperability to support multiple applications. In addition, open standards addressing interoperability, are key for the development and deployment of the Smart Grid as a true integrated network. A communications backbone is necessary to provide interoperability. To achieve the level of networking, interoperability and security that meets the technical requirements of the Smart Grid, its data communications

Impact of Technology on Indian Media-An Analysis

Directory of Open Access Journals (Sweden)

Chandra Shekhar Ghanta

2012-07-01

Full Text Available Technology is playing a major role in disseminating the information. The ethical use ofnew technologies in journalistic work is imperative given the widespread use of such technology forthe benefit of society. In general the usage of information technology can be found in the form ofInternet-based technologies in information gathering and news writing. Attribution of onlineinformation, general use of online content, plagiarism of Web-based news, use of direct quotationsfound online. In this regard a million dollars question will emerge that whither these new mediatechnologies? This paper examines the ethics of Indian newsgathering practices in the context of newmedia technologies.The methodology of the paper is descriptive and explorative in nature.

Analysis technology in the thick plate free drop impact, heat and thermal stress of the cask for radioactive material transport

International Nuclear Information System (INIS)

Lee, Dew Hey; Lee, Young Shin; Ryu, Chung Hyun; Kim, Hyun Su; Choi, Kyung Joo; Choi, Young Jin; Lee, Jae Hyung; Na, Jae Yun; Kim, Seong Jong

2002-03-01

In this study, The regulatory condition and analysis condition is analyzed for thick plate free drop, heat and thermal stress analysis to develop the safety assessment technology. Analysis is performed with finite element method which is one of the many analysis methods of the shipping cask. ANSYS, LS-DYNA3D and ABAQUS is suitable for thick plate free drop, heat and thermal stress analysis of the shipping cask. For the analysis model, the KSC-4 that is the shipping cask to transport spent nuclear fuel is investigated. The results of both LS-DYNA3D and ABAQUS for thick plate free drop and the results of ANSYS, LS-DYNA3D and ABAQUS for heat and thermal stress analysis is completely corresponded. And the integrity of the shipping cask is verified. Using this study, the reliable safety assessment technology is supplied to the staff. The efficient and reliable regulatory tasks is performed using the standard safety assessment technology

Analysis technology in the thick plate free drop impact, heat and thermal stress of the cask for radioactive material transport

Energy Technology Data Exchange (ETDEWEB)

Lee, Dew Hey [Korea Institute of Nuclear and Safety, Taejon (Korea, Republic of); Lee, Young Shin; Ryu, Chung Hyun; Kim, Hyun Su; Choi, Kyung Joo; Choi, Young Jin; Lee, Jae Hyung; Na, Jae Yun; Kim, Seong Jong [Chungnam National Univ., Taejon (Korea, Republic of)

2002-03-15

In this study, The regulatory condition and analysis condition is analyzed for thick plate free drop, heat and thermal stress analysis to develop the safety assessment technology. Analysis is performed with finite element method which is one of the many analysis methods of the shipping cask. ANSYS, LS-DYNA3D and ABAQUS is suitable for thick plate free drop, heat and thermal stress analysis of the shipping cask. For the analysis model, the KSC-4 that is the shipping cask to transport spent nuclear fuel is investigated. The results of both LS-DYNA3D and ABAQUS for thick plate free drop and the results of ANSYS, LS-DYNA3D and ABAQUS for heat and thermal stress analysis is completely corresponded. And the integrity of the shipping cask is verified. Using this study, the reliable safety assessment technology is supplied to the staff. The efficient and reliable regulatory tasks is performed using the standard safety assessment technology.

An application of multiattribute decision analysis to the Space Station Freedom program. Case study: Automation and robotics technology evaluation

Science.gov (United States)

Smith, Jeffrey H.; Levin, Richard R.; Carpenter, Elisabeth J.

1990-01-01

The results are described of an application of multiattribute analysis to the evaluation of high leverage prototyping technologies in the automation and robotics (A and R) areas that might contribute to the Space Station (SS) Freedom baseline design. An implication is that high leverage prototyping is beneficial to the SS Freedom Program as a means for transferring technology from the advanced development program to the baseline program. The process also highlights the tradeoffs to be made between subsidizing high value, low risk technology development versus high value, high risk technology developments. Twenty one A and R Technology tasks spanning a diverse array of technical concepts were evaluated using multiattribute decision analysis. Because of large uncertainties associated with characterizing the technologies, the methodology was modified to incorporate uncertainty. Eight attributes affected the rankings: initial cost, operation cost, crew productivity, safety, resource requirements, growth potential, and spinoff potential. The four attributes of initial cost, operations cost, crew productivity, and safety affected the rankings the most.

Technological Criteria Technology-Environmental under a Systemic Approach: Chemistry Technology Transfer

Directory of Open Access Journals (Sweden)

Durán-García Martín Enrique

2014-07-01

Full Text Available Currently the transfer of chemical technology is a process that contributes to the technology policy of a country, an industry or an organization in general chemistry. This process requires the application of clear criteria for the proper development of the complex interrelations in the transfer of chemical technology. A group of criteria that are present, are those related to environmental technology which intrinsically define the technology and its impact to the environment. Therefore, the transfer of chemical technology requires technological-environmental criteria defining, in conjunction with other criteria, an adequate process for the selection, acquisition and incorporation of technology in a holistic perspective, so it provides feasible solutions the chemical industry in pursuit of their goals. Then the criterion becomes a benchmark for assessing an appropriate technology transfer process. We performed a theoretical analysis of the technological and environmental criteria, proposing thirty-six (36 technological-environmental criteria interrelated under a systemic approach in the process of transfer of chemical technology, focused on a methodological cycle first run, based primarily on the research-action method. Future research is expected to make a refinement of the criteria from the formulation and validation of metrics so that necessary adjustments are made to optimize the process of transfer of chemical technology.

Cognitive technologies

CERN Document Server

Mello, Alan; Figueiredo, Fabrício; Figueiredo, Rafael

2017-01-01

This book focuses on the next generation optical networks as well as mobile communication technologies. The reader will find chapters on Cognitive Optical Network, 5G Cognitive Wireless, LTE, Data Analysis and Natural Language Processing. It also presents a comprehensive view of the enhancements and requirements foreseen for Machine Type Communication. Moreover, some data analysis techniques and Brazilian Portuguese natural language processing technologies are also described here. .

How cutting-edge technologies impact the design of electrochemical (bio)sensors for environmental analysis. A review.

Science.gov (United States)

Arduini, Fabiana; Cinti, Stefano; Scognamiglio, Viviana; Moscone, Danila; Palleschi, Giuseppe

2017-03-22

Through the years, scientists have developed cutting-edge technologies to make (bio)sensors more convenient for environmental analytical purposes. Technological advancements in the fields of material science, rational design, microfluidics, and sensor printing, have radically shaped biosensor technology, which is even more evident in the continuous development of sensing systems for the monitoring of hazardous chemicals. These efforts will be crucial in solving some of the problems constraining biosensors to reach real environmental applications, such as continuous analyses in field by means of multi-analyte portable devices. This review (with 203 refs.) covers the progress between 2010 and 2015 in the field of technologies enabling biosensor applications in environmental analysis, including i) printing technology, ii) nanomaterial technology, iii) nanomotors, iv) biomimetic design, and (v) microfluidics. Next section describes futuristic cutting-edge technologies that are gaining momentum in recent years, which furnish highly innovative aspects to biosensing devices. Copyright © 2016 Elsevier B.V. All rights reserved.

Analysis of human resources in science and technology in ICT companies–case of Croatia

Directory of Open Access Journals (Sweden)

Jelena Horvat

2014-12-01

Full Text Available This paper integrates theories and findings of the level of tertiary educated workforce, the human resources in science and technology and skills that are desirable in employees from in the information and communication technologies (ICT sector. It is important to examine the real situation on the labor market in the ICT sector, which is often referred to as the key to overcoming the crisis and the future of national economy. Basic statistical elements, upon which to predict future demand for human resources in science and technology (HRST, are people who enter tertiary level of education (inputs or are already in the system (throughputs, but until graduation are not considered HRST’s (outputs. Analysis is based on a sample of 56 small companies in ICT sector in Croatia. This paper presents the overview of the situations of human resources in small companies ICT sector in Croatia. Existing literature on HRST, employee’s skills and ICT sector is reviewed in the light of this analysis, in order to better understand current employment structure and desirable competencies of future employees of small companies in the ICT sector in Croatia.

Application of Open Source Technologies for Oceanographic Data Analysis

Science.gov (United States)

Huang, T.; Gangl, M.; Quach, N. T.; Wilson, B. D.; Chang, G.; Armstrong, E. M.; Chin, T. M.; Greguska, F.

2015-12-01

NEXUS is a data-intensive analysis solution developed with a new approach for handling science data that enables large-scale data analysis by leveraging open source technologies such as Apache Cassandra, Apache Spark, Apache Solr, and Webification. NEXUS has been selected to provide on-the-fly time-series and histogram generation for the Soil Moisture Active Passive (SMAP) mission for Level 2 and Level 3 Active, Passive, and Active Passive products. It also provides an on-the-fly data subsetting capability. NEXUS is designed to scale horizontally, enabling it to handle massive amounts of data in parallel. It takes a new approach on managing time and geo-referenced array data by dividing data artifacts into chunks and stores them in an industry-standard, horizontally scaled NoSQL database. This approach enables the development of scalable data analysis services that can infuse and leverage the elastic computing infrastructure of the Cloud. It is equipped with a high-performance geospatial and indexed data search solution, coupled with a high-performance data Webification solution free from file I/O bottlenecks, as well as a high-performance, in-memory data analysis engine. In this talk, we will focus on the recently funded AIST 2014 project by using NEXUS as the core for oceanographic anomaly detection service and web portal. We call it, OceanXtremes

Risk analysis and technology assessment in support of technology development: Putting responsible innovation in practice in a case study for nanotechnology.

Science.gov (United States)

van Wezel, Annemarie P; van Lente, Harro; van de Sandt, Johannes Jm; Bouwmeester, Hans; Vandeberg, Rens Lj; Sips, Adrienne Jam

2018-01-01

Governments invest in "key enabling technologies," such as nanotechnology, to solve societal challenges and boost the economy. At the same time, governmental agencies demand risk reduction to prohibit any often unknown adverse effects, and industrial parties demand smart approaches to reduce uncertainties. Responsible research and innovation (RRI) is therefore a central theme in policy making. Risk analysis and technology assessment, together referred to as "RATA," can provide a basis to assess human, environmental, and societal risks of new technological developments during the various stages of technological development. This assessment can help both governmental authorities and innovative industry to move forward in a sustainable manner. Here we describe the developed procedures and products and our experiences to bring RATA in practice within a large Dutch nanotechnology consortium. This is an example of how to put responsible innovation in practice as an integrated part of a research program, how to increase awareness of RATA, and how to help technology developers perform and use RATA. Integr Environ Assess Manag 2018;14:9-16. © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC). © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Technology and Greenhouse Gas Emissions: An Integrated Scenario Analysis using the LBNL-NEMS model

International Nuclear Information System (INIS)

Koomey, J.G.; Latiner, S.; Markel, R.J.; Marnay, C.; Richey, R.C.

1998-01-01

This report describes an analysis of possible technology-based scenarios for the U.S. energy system that would result in both carbon savings and net economic benefits. We use a modified version of the Energy Information Administration's National Energy Modeling System (LBNL-NEMS) to assess the potential energy, carbon, and bill savings from a portfolio of carbon saving options. This analysis is based on technology resource potentials estimated in previous bottom-up studies, but it uses the integrated LBNL-NEMS framework to assess interactions and synergies among these options. The analysis in this paper builds on previous estimates of possible ''technology paths'' to investigate four major components of an aggressive greenhouse gas reduction strategy: (1) the large scale implementation of demand-side efficiency, comparable in scale to that presented in two recent policy studies on this topic; (2) a variety of ''alternative'' electricity supply-side options, including biomass cofiring, extension of the renewable production tax credit for wind, increased industrial cogeneration, and hydropower refurbishment. (3) the economic retirement of older and less efficient existing fossil-find power plants; and (4) a permit charge of $23 per metric ton of carbon (1996 $/t),l assuming that carbon trading is implemented in the US, and that the carbon permit charge equilibrates at this level. This level of carbon permit charge, as discussed later in the report, is in the likely range for the Clinton Administration's position on this topic

Sustainability assessment of electricity generation technologies using weighted multi-criteria decision analysis

International Nuclear Information System (INIS)

Maxim, Alexandru

2014-01-01

Solving the issue of environmental degradation due to the expansion of the World's energy demand requires a balanced approach. The aim of this paper is to comprehensively rank a large number of electricity generation technologies based on their compatibility with the sustainable development of the industry. The study is based on a set of 10 sustainability indicators which provide a life cycle analysis of the plants. The technologies are ranked using a weighted sum multi-attribute utility method. The indicator weights were established through a survey of 62 academics from the fields of energy and environmental science. Our results show that large hydroelectric projects are the most sustainable technology type, followed by small hydro, onshore wind and solar photovoltaic. We argue that political leaders should have a more structured and strategic approach in implementing sustainable energy policies and this type of research can provide arguments to support such decisions. - Highlights: • We rank 13 electricity generation technologies based on sustainability. • We use 10 indicators in a weighted sum multi-attribute utility approach. • Weights are calculated based on a survey of 62 academics from the field. • Large hydroelectric projects are ranked as the most sustainable. • Decision makers can use the results to promote a more sustainable energy industry

Enhanced AFCI Sampling, Analysis, and Safeguards Technology Review

Energy Technology Data Exchange (ETDEWEB)

John Svoboda

2009-09-01

The focus of this study includes the investigation of sampling technologies used in industry and their potential application to nuclear fuel processing. The goal is to identify innovative sampling methods using state of the art techniques that could evolve into the next generation sampling and analysis system for metallic elements. Sampling and analysis of nuclear fuel recycling plant processes is required both to monitor the operations and ensure Safeguards and Security goals are met. In addition, environmental regulations lead to additional samples and analysis to meet licensing requirements. The volume of samples taken by conventional means, can restrain productivity while results samples are analyzed, require process holding tanks that are sized to meet analytical issues rather than process issues (and that create a larger facility footprint), or, in some cases, simply overwhelm analytical laboratory capabilities. These issues only grow when process flowsheets propose new separations systems and new byproduct material for transmutation purposes. Novel means of streamlining both sampling and analysis are being evaluated to increase the efficiency while meeting all requirements for information. This report addresses just a part of the effort to develop and study novel methods by focusing on the sampling and analysis of aqueous samples for metallic elements. It presents an overview of the sampling requirements, including frequency, sensitivity, accuracy, and programmatic drivers, to demonstrate the magnitude of the task. The sampling and analysis system needed for metallic element measurements is then discussed, and novel options being applied to other industrial analytical needs are presented. Inductively coupled mass spectrometry instruments are the most versatile for metallic element analyses and are thus chosen as the focus for the study. Candidate novel means of process sampling, as well as modifications that are necessary to couple such instruments to

Sectoral dynamics and technological convergence: an evolutionary analysis of eco-innovation in the automotive sector

DEFF Research Database (Denmark)

Faria, Lourenco; Andersen, Maj Munch

2017-01-01

We know from evolutionary theory that sectoral characteristics are important to innovation. This paper investigates if sectoral characteristics also are important to eco-innovation, a hitherto under-researched theme. We argue that research into possible sectoral patterns in eco-innovation is key...... 1965 to 2012, focusing on powertrain technologies. The empirical analysis is based on patent data amongst big car producers and focuses on identifying changes in two main aspects: (1) the convergence/divergence of firms’ green strategies and technologies within the automotive sector; and (2......) the contribution of alternative key green technological trajectories relative to the dominant design. Our findings indicate that the evolution of relative green patenting has followed a positive, linear growth over the last decades with increasing participation of alternative propulsion technologies and increasing...

Quantitative Analysis of Technological Innovation in Urology.

Science.gov (United States)

Bhatt, Nikita R; Davis, Niall F; Dalton, David M; McDermott, Ted; Flynn, Robert J; Thomas, Arun Z; Manecksha, Rustom P

2018-01-01

To assess major areas of technological innovation in urology in the last 20 years using patent and publication data. Patent and MEDLINE databases were searched between 1980 and 2012 electronically using the terms urology OR urological OR urologist AND "surgeon" OR "surgical" OR "surgery". The patent codes obtained were grouped in technology clusters, further analyzed with individual searches, and growth curves were plotted. Growth rates and patterns were analyzed, and patents were correlated with publications as a measure of scientific support and of clinical adoption. The initial search revealed 417 patents and 20,314 publications. The top 5 technology clusters in descending order were surgical instruments including urinary catheters, minimally invasive surgery (MIS), lasers, robotic surgery, and image guidance. MIS and robotic surgery were the most emergent clusters in the last 5 years. Publication and patent growth rates were closely correlated (Pearson coefficient 0.78, P innovation and adoption into clinical practice. Patent metrics identify emergent technological innovations and such trends are valuable to understand progress in the field of urology. New surgical technologies like robotic surgery and MIS showed exponential growth in the last decade with good scientific vigilance. Copyright © 2017 Elsevier Inc. All rights reserved.

Risk-based systems analysis of emerging high-level waste tank remediation technologies. Volume 2: Final report

International Nuclear Information System (INIS)

Peters, B.B.; Cameron, R.J.; McCormack, W.D.

1994-08-01

The objective of DOE's Radioactive Waste Tank Remediation Technology Focus Area is to identify and develop new technologies that will reduce the risk and/or cost of remediating DOE underground waste storage tanks and tank contents. There are, however, many more technology investment opportunities than the current budget can support. Current technology development selection methods evaluate new technologies in isolation from other components of an overall tank waste remediation system. This report describes a System Analysis Model developed under the US Department of Energy (DOE) Office of Technology Development (OTD) Underground Storage Tank-Integrated Demonstration (UST-ID) program. The report identifies the project objectives and provides a description of the model. Development of the first ''demonstration'' version of this model and a trial application have been completed and the results are presented. This model will continue to evolve as it undergoes additional user review and testing

Risk-based systems analysis of emerging high-level waste tank remediation technologies. Volume 2: Final report

Energy Technology Data Exchange (ETDEWEB)

Peters, B.B.; Cameron, R.J.; McCormack, W.D. [Enserch Environmental Corp., Richland, WA (United States)

1994-08-01

The objective of DOE`s Radioactive Waste Tank Remediation Technology Focus Area is to identify and develop new technologies that will reduce the risk and/or cost of remediating DOE underground waste storage tanks and tank contents. There are, however, many more technology investment opportunities than the current budget can support. Current technology development selection methods evaluate new technologies in isolation from other components of an overall tank waste remediation system. This report describes a System Analysis Model developed under the US Department of Energy (DOE) Office of Technology Development (OTD) Underground Storage Tank-Integrated Demonstration (UST-ID) program. The report identifies the project objectives and provides a description of the model. Development of the first ``demonstration`` version of this model and a trial application have been completed and the results are presented. This model will continue to evolve as it undergoes additional user review and testing.

Low carbon technology performance vs infrastructure vulnerability: analysis through the local and global properties space.

Science.gov (United States)

Dawson, David A; Purnell, Phil; Roelich, Katy; Busch, Jonathan; Steinberger, Julia K

2014-11-04

Renewable energy technologies, necessary for low-carbon infrastructure networks, are being adopted to help reduce fossil fuel dependence and meet carbon mitigation targets. The evolution of these technologies has progressed based on the enhancement of technology-specific performance criteria, without explicitly considering the wider system (global) impacts. This paper presents a methodology for simultaneously assessing local (technology) and global (infrastructure) performance, allowing key technological interventions to be evaluated with respect to their effect on the vulnerability of wider infrastructure systems. We use exposure of low carbon infrastructure to critical material supply disruption (criticality) to demonstrate the methodology. A series of local performance changes are analyzed; and by extension of this approach, a method for assessing the combined criticality of multiple materials for one specific technology is proposed. Via a case study of wind turbines at both the material (magnets) and technology (turbine generators) levels, we demonstrate that analysis of a given intervention at different levels can lead to differing conclusions regarding the effect on vulnerability. Infrastructure design decisions should take a systemic approach; without these multilevel considerations, strategic goals aimed to help meet low-carbon targets, that is, through long-term infrastructure transitions, could be significantly jeopardized.

Sea-based JSOTFs: Considerations for the Operational Planner

Science.gov (United States)

2014-05-15

the distinct requirements of the GCE hitting the beach. An equal level of specialization regarding special operations extends to the various...will discuss some of the operational level advantages and challenges of this novel construct and will proffer suggestions regarding how current...This paper will discuss some of the operational level advantages and challenges of this novel construct and will proffer suggestions regarding how

Using applied behavior analysis and smart technology for meeting the health needs of individuals with intellectual disabilities.

Science.gov (United States)

Haymes, Linda K; Storey, Keith; Maldonado, Ana; Post, Michal; Montgomery, Joyce

2015-01-01

Individuals with intellectual disabilities often have special healthcare concerns such as diabetes, kidney disease, severe allergies, progressive illnesses, respiratory weaknesses, and obesity. Smart technology can be an asset for individuals with intellectual disabilities for better managing their healthcare needs. A critical review of the literature related to applied behavior analysis, smart technology, and health needs of individuals with intellectual disabilities was conducted. This discussion paper describes factors that contribute to the successful use of smart technology for the health issues of individuals with intellectual disabilities. We see key components in developing appropriate access and use of smart technology for the health of people with intellectual disabilities being: (a) systematic instructional methods for consistent and accurate use of the technology, (b) modifying the current technology for people with intellectual disabilities, (c) guidelines for implementation, and (d) resources for getting the technology.

System analysis for material control and accountancy technology

International Nuclear Information System (INIS)

Persiani, P.J.; Daly, T.A.; Bucher, R.G.; Rothman, A.B.; Cha, B.C.; Trevorrow, L.E.; Seefeldt, W.B.

1987-01-01

The systems analysis for material control and accountancy technology (SAMCAT) program involves a working group structured to ensure that direct operating measurements, accountancy experience, and knowledge of the processes and flows of nuclear material in the total US Department of Energy (DOE) complex of production fuel cycles would be the major bases for developing and implementing a plan of action. This working group consists of facility operators, DOE Office of Safeguards Security headquarters and field offices, and government laboratories. The program focus is to develop a system for decision support in validating the material control and accountancy (MC ampersand A) aspects of the masters safeguards and security agreements effectiveness and in evaluating proposed MC ampersand A upgrades. This paper is a status report on the current capabilities of the system

An Analysis of Technology Acceptance in Turkey using Fuzzy Logic and Structural Equation Modelling

Directory of Open Access Journals (Sweden)

Bilgin Şenel

2011-12-01

Full Text Available Technology is in a constant progress in the way of satisfying increasing human needs. This fact will hold true for the years to come. However, the level of adaptation to technological advancements varies greatly across countries. The pace of adjustment is directly proportional to the importance attached to and the funds allocated for this purpose. Despite the abundance of technological investments in Turkey in recent years, there are only a few studies analyzing the current level of individual interest in technology. This study therefore aims to determine the technology acceptance of Turkish people by using the Technology Acceptance Model (TAM developed by Davis (1989 and to demonstrate the reasons to accept or not accept technology departing from the links between dimensions. While accomplishing this aim, Structural Equation Model (SEM that is a highly strong multivariable analysis technique that makes possible the evaluation of latent structures like psychosocial needs, and the Fuzzy Logic Theorem that provides strong and significant instruments for the measurement of ambiguities and provides the opportunity to meaningfully represent ambiguous concepts expressed in the natural language were used. According to the findings of this study, it was determined that the perceived ease of use is more influential in people’s acceptance of technology than the perceived usefulness is. It was also found that technology acceptance does not differ significantly at the statistical significance level of 0.05 with respect to the participants’ demographic characteristics (age, gender, education level, hometown etc.. In addition, analyses performed to define the relationships between the dimensions of the TAM yielded results that highly supported the TAM. In other words, the dimensions affect technology acceptance to positive and significant degrees

Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)

Energy Technology Data Exchange (ETDEWEB)

Moe, Wayne L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-08-23

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

Energy Technology Data Exchange (ETDEWEB)

Moe, Wayne Leland [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-05-01

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

Risk-based systems analysis of emerging high-level waste tank remediation technologies. Volume 1: Executive summary

International Nuclear Information System (INIS)

Peters, B.B.; Cameron, R.J.; McCormack, W.D.

1994-08-01

This report describes a System Analysis Model developed under the US Department of Energy (DOE) Office of Technology Development (OTD) Underground Storage Tank-Integrated Demonstration (UST-ID) program to aid technology development funding decisions for radioactive tank waste remediation. Current technology development selection methods evaluate new technologies in isolation from other components of an overall tank waste remediation system. These methods do not show the relative effect of new technologies on tank remediation systems as a whole. Consequently, DOE may spend its resources on technologies that promise to improve a single function but have a small or possibly negative, impact on the overall system, or DOE may overlook a technology that does not address a high priority problem in the system but that does, if implemented, offer sufficient overall improvements. Systems engineering and detailed analyses often conducted under the National Environmental Policy Act (NEPA 1969) use a ''whole system'' approach but are costly, too time-consuming, and often not sufficiently focused to support the needs of the technology program decision-makers. An alternative approach is required to evaluate these systems impacts but still meet the budget and schedule needs of the technology program

Fluid Vessel Quantity using Non-Invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

Science.gov (United States)

Garofalo, Anthony A.

2013-01-01

The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

Analysis of application of “Power to Gas” technology in Bosnia and Herzegovina

Directory of Open Access Journals (Sweden)

Amila Ajdinovic

2016-11-01

Full Text Available Significant use of renewable energy sources (RES for production of electrical energy causes issues related to balancing between production and consumption. One of the possibilities for balancing production and consumption of electrical energy is the “Power to Gas” technology (PtG. PtG is a technology for methanation of hydrogen by carbon from carbondioxide using surplus of power from a grid. Analysis of PtG application in Bosnia and Herzegovina is described in this paper. The results showed that after deployment of major part of wind and minor part of solar potential, optimal capacity of PtG would be 150 MW.

Air & Space Journal. Volume 28, Number 4. July-August 2014

Science.gov (United States)

2014-08-01

College, Washington DC. He served as an air battle manager for Opera- tions Desert Fox , Enduring Freedom, Iraqi Freedom, and New Dawn. After completing US...platform during a rigorous three-day hunt . The E-8C arrived on orbit shortly after dark to stalk July–August 2014 Air & Space Power Journal | 98 Dalman...carried out 75 percent of strike sorties and 100 percent of sea-based enforce- ment of the arms embargo.11 France and Britain successfully ran the

Using Citation Analysis Methods to Assess the Influence of Science, Technology, Engineering, and Mathematics Education Evaluations

Science.gov (United States)

Greenseid, Lija O.; Lawrenz, Frances

2011-01-01

This study explores the use of citation analysis methods to assess the influence of program evaluations conducted within the area of science, technology, engineering, and mathematics (STEM) education. Citation analysis is widely used within scientific research communities to measure the relative influence of scientific research enterprises and/or…

Introduction to a special section: Impacts and implications of future-oriented technology analysis for policy and decision-making

OpenAIRE

Karel Haegeman; Jennifer C Harper; Ron Johnston

2010-01-01

Experiences of recent years place a premium, for governments and individuals, on being able to discern the possible shape of the future: what is likely to influence it, and what can be done to prepare for it. This special section is based on selected papers from the Third International Seville Seminar on Future-Oriented Technology Analysis, held 16–17 October 2008 at Seville, Spain, which addressed the challenge of increasing the impact of future-oriented technology analysis on policy and dec...

Telemedicine Technologies for Diabetes in Pregnancy: A Systematic Review and Meta-Analysis.

Science.gov (United States)

Ming, Wai-Kit; Mackillop, Lucy H; Farmer, Andrew J; Loerup, Lise; Bartlett, Katy; Levy, Jonathan C; Tarassenko, Lionel; Velardo, Carmelo; Kenworthy, Yvonne; Hirst, Jane E

2016-11-09

Diabetes in pregnancy is a global problem. Technological innovations present exciting opportunities for novel approaches to improve clinical care delivery for gestational and other forms of diabetes in pregnancy. To perform an updated and comprehensive systematic review and meta-analysis of the literature to determine whether telemedicine solutions offer any advantages compared with the standard care for women with diabetes in pregnancy. The review was developed using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) framework. Randomized controlled trials (RCT) in women with diabetes in pregnancy that compared telemedicine blood glucose monitoring with the standard care were identified. Searches were performed in SCOPUS and PubMed, limited to English language publications between January 2000 and January 2016. Trials that met the eligibility criteria were scored for risk of bias using the Cochrane Collaborations Risk of Bias Tool. A meta-analysis was performed using Review Manager software version 5.3 (Nordic Cochrane Centre, Cochrane Collaboration). A total of 7 trials were identified. Meta-analysis demonstrated a modest but statistically significant improvement in HbA1c associated with the use of a telemedicine technology. The mean HbA1c of women using telemedicine was 5.33% (SD 0.70) compared with 5.45% (SD 0.58) in the standard care group, representing a mean difference of -0.12% (95% CI -0.23% to -0.02%). When this comparison was limited to women with gestational diabetes mellitus (GDM) only, the mean HbA1c of women using telemedicine was 5.22% (SD 0.70) compared with 5.37% (SD 0.61) in the standard care group, mean difference -0.14% (95% CI -0.25% to -0.04%). There were no differences in other maternal and neonatal outcomes reported. There is currently insufficient evidence that telemedicine technology is superior to standard care for women with diabetes in pregnancy; however, there was no evidence of harm. No trials were

Green technology foresight of high technology: a social shaping of technology approach to the analysis of hopes and hypes

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Jørgensen, Ulrik

2009-01-01

Protection Agency with the purpose of acquiring knowledge about the environmental potentials and risks related to the three areas of technology. The foresight was organized with a social shaping of technology (SST) approach to the field in order to cater for the complex relationship between societal demands......, technology options, innovation dynamics and environmental impacts. The approach involved studying actor-networks, laboratory programs and technology trajectories as well as deconstructing different stakeholders’ high tech visions. The identified environmental potentials and risks related to the three areas...

Multimedia Image Technology and Computer Aided Manufacturing Engineering Analysis

Science.gov (United States)

Nan, Song

2018-03-01

Since the reform and opening up, with the continuous development of science and technology in China, more and more advanced science and technology have emerged under the trend of diversification. Multimedia imaging technology, for example, has a significant and positive impact on computer aided manufacturing engineering in China. From the perspective of scientific and technological advancement and development, the multimedia image technology has a very positive influence on the application and development of computer-aided manufacturing engineering, whether in function or function play. Therefore, this paper mainly starts from the concept of multimedia image technology to analyze the application of multimedia image technology in computer aided manufacturing engineering.

Analysis and study of data security in the Internet of Things paradigm from a Blockchain technology approach

OpenAIRE

Rull Aixa, David

2018-01-01

This project is a space of information and knowledge of the IoT paradigm and Blockchain technology with the analysis of the most relevant research articles and the study of the most important threats of IoT technologies and scenarios. In addition, it offers an overview of the current state of the paradigm from the perspective of security and the opportunities that its combination with Blockchain technology can bring to our society. Aquest projecte és un espai d'informació i coneixement ...

Teaching motor skills by means of biomechanical analysis of the motion: the physiological basis and applied information technologies

Directory of Open Access Journals (Sweden)

Razuvanova A.V.

2016-01-01

Full Text Available The article proves the possibility of training athletes using motor skills on the basis of biomechanical analysis of movements with application of information technologies. Motion Tracking – digital single frame shooting photography – is proposed as a method for biomechanical analysis. The relevance of this method is conditioned by the results of the study of a repulsion phase in the performing of the standing jump by athletes of different qualifications. The conclusion about the importance of an optimal model of a jump based on biomechanical analysis is given, and the formation of athletes’ skills, using information technologies and the principle of urgent information, is discussed.

Evaluating New Technology.

Science.gov (United States)

Carniol, Paul J; Heffelfinger, Ryan N; Grunebaum, Lisa D

2018-05-01

There are multiple complex issues to consider when evaluating any new technology. First evaluate the efficacy of the device. Then considering your patient population decide whether this technology brings an added benefit to your patients. If it meets these 2 criteria, then proceed to the financial analysis of acquiring this technology. The complete financial analysis has several important components that include but are not limited to cost, value, alternatives, return on investment, and associated marketing expense. Copyright © 2018 Elsevier Inc. All rights reserved.

Decision Analysis Methods Used to Make Appropriate Investments in Human Exploration Capabilities and Technologies

Science.gov (United States)

Williams-Byrd, Julie; Arney, Dale C.; Hay, Jason; Reeves, John D.; Craig, Douglas

2016-01-01

NASA is transforming human spaceflight. The Agency is shifting from an exploration-based program with human activities in low Earth orbit (LEO) and targeted robotic missions in deep space to a more sustainable and integrated pioneering approach. Through pioneering, NASA seeks to address national goals to develop the capacity for people to work, learn, operate, live, and thrive safely beyond Earth for extended periods of time. However, pioneering space involves daunting technical challenges of transportation, maintaining health, and enabling crew productivity for long durations in remote, hostile, and alien environments. Prudent investments in capability and technology developments, based on mission need, are critical for enabling a campaign of human exploration missions. There are a wide variety of capabilities and technologies that could enable these missions, so it is a major challenge for NASA's Human Exploration and Operations Mission Directorate (HEOMD) to make knowledgeable portfolio decisions. It is critical for this pioneering initiative that these investment decisions are informed with a prioritization process that is robust and defensible. It is NASA's role to invest in targeted technologies and capabilities that would enable exploration missions even though specific requirements have not been identified. To inform these investments decisions, NASA's HEOMD has supported a variety of analysis activities that prioritize capabilities and technologies. These activities are often based on input from subject matter experts within the NASA community who understand the technical challenges of enabling human exploration missions. This paper will review a variety of processes and methods that NASA has used to prioritize and rank capabilities and technologies applicable to human space exploration. The paper will show the similarities in the various processes and showcase instances were customer specified priorities force modifications to the process. Specifically

Evaluation of Groundwater Remediation Technologies Based on Fuzzy Multi-Criteria Decision Analysis Approaches

Directory of Open Access Journals (Sweden)

Hao Wang

2017-06-01

Full Text Available Petroleum is an essential resource for the development of society and its production is huge. There is a great risk of leakage of oil during production, refining, and transportation. After entering the environment, the oil pollutants will be a great threat to the environment and may endanger human health. Therefore, it is very important to remediate oil pollution in the subsurface. However, it is necessary to choose the appropriate remediation technology. In this paper, 18 technologies are evaluated through constructing a parameter matrix with each technology and seven performance indicators, and a comprehensive analysis model is presented. In this model, four MCDA methods are used. They are SWA (Simple Weighted Addition Method, WP (Weighted Product Method, CGT (Cooperative Game Theory, and TOPSIS (Technique for Order Preference by Similarity to Ideal Solution. Mean ranking and Borda ranking methods are used to integrate the results of SWA, WP, CGT, and TOPSIS. Then two selection priorities of each method (mean ranking and Borda ranking are obtained. The model is proposed to help decide the best choice of remediation technologies. It can effectively reduce contingency, subjectivity, one-sidedness of the traditional methods and provide scientific reference for effective decision-making.

Data-Proximate Analysis and Visualization in the Cloud using Cloudstream, an Open-Source Application Streaming Technology Stack

Science.gov (United States)

Fisher, W. I.

2017-12-01

The rise in cloud computing, coupled with the growth of "Big Data", has lead to a migration away from local scientific data storage. The increasing size of remote scientific data sets increase, however, makes it difficult for scientists to subject them to large-scale analysis and visualization. These large datasets can take an inordinate amount of time to download; subsetting is a potential solution, but subsetting services are not yet ubiquitous. Data providers may also pay steep prices, as many cloud providers meter data based on how much data leaves their cloud service. The solution to this problem is a deceptively simple one; move data analysis and visualization tools to the cloud, so that scientists may perform data-proximate analysis and visualization. This results in increased transfer speeds, while egress costs are lowered or completely eliminated. Moving standard desktop analysis and visualization tools to the cloud is enabled via a technique called "Application Streaming". This technology allows a program to run entirely on a remote virtual machine while still allowing for interactivity and dynamic visualizations. When coupled with containerization technology such as Docker, we are able to easily deploy legacy analysis and visualization software to the cloud whilst retaining access via a desktop, netbook, a smartphone, or the next generation of hardware, whatever it may be. Unidata has created a Docker-based solution for easily adapting legacy software for Application Streaming. This technology stack, dubbed Cloudstream, allows desktop software to run in the cloud with little-to-no effort. The docker container is configured by editing text files, and the legacy software does not need to be modified in any way. This work will discuss the underlying technologies used by Cloudstream, and outline how to use Cloudstream to run and access an existing desktop application to the cloud.

A meta-analysis of determinants of RFID adoption around the world: Organization, technology, and public policy

Directory of Open Access Journals (Sweden)

Sabinne Lee

2017-01-01

Full Text Available Purpose - This paper aims to explore various factors associated with radio frequency identification (RFID adoption with quantitative meta-analysis. More specifically, this paper attempts to measure key variables of RFID adoption derived from Rogers’ innovation theory and further examines how state intervention influences the process of RFID adoption. First, this paper compares, relying on a meta-analysis, various mean effect sizes among technological, organizational and environmental factors (i.e. government-driven policies that Rogers suggested in his innovation model. Design/methodology/approach - In mean effect size analysis, this paper finds that the technological factor is the most powerful factor that affects the RFID adoption. The technological factor is statistically significant across all regions, including North America, Europe and Asia. The organizational factor is significant only in developing countries like Southeast Asian countries and East Asian countries. Environmental factors like government intervention for facilitating RFID adoption are strong enough only in Southeast Asia and Europe. Findings - This paper finds that government’s supportive policy is more effective in Europe but not in America, while external pressure is still more effective in Southeast Asia. These results implicate that developmentalism or government-driven policy can be effective not only in developing countries but also in the case of developed countries. In addition, this paper conducts a seemingly unrelated regression (SUR analysis based on Fisher’s standardized score. Originality/value - In SUR analysis, this paper finds that the correlations between RFID adoption intention and three innovation factors vary across industrial areas. More specifically, the manufacturing area shows negative moderating effect on all three equations where correlations between Rogers’ innovation factors and RFID adoption intention are meta-dependent variables. Also

High-throughput metagenomic technologies for complex microbial community analysis: open and closed formats.

Science.gov (United States)

Zhou, Jizhong; He, Zhili; Yang, Yunfeng; Deng, Ye; Tringe, Susannah G; Alvarez-Cohen, Lisa

2015-01-27

Understanding the structure, functions, activities and dynamics of microbial communities in natural environments is one of the grand challenges of 21st century science. To address this challenge, over the past decade, numerous technologies have been developed for interrogating microbial communities, of which some are amenable to exploratory work (e.g., high-throughput sequencing and phenotypic screening) and others depend on reference genes or genomes (e.g., phylogenetic and functional gene arrays). Here, we provide a critical review and synthesis of the most commonly applied "open-format" and "closed-format" detection technologies. We discuss their characteristics, advantages, and disadvantages within the context of environmental applications and focus on analysis of complex microbial systems, such as those in soils, in which diversity is high and reference genomes are few. In addition, we discuss crucial issues and considerations associated with applying complementary high-throughput molecular technologies to address important ecological questions. Copyright © 2015 Zhou et al.

Strategic analysis of companies offering technology services to farmers for mobile applications media

Directory of Open Access Journals (Sweden)

Rodrigo da Silva Riquena

2016-03-01

Full Text Available The use of smart-phones and tablets is increasing the farming community before these fact companies that offer products and services to this sector are mobilizing to be active in this new reality. However, companies that operate in the rural market, not only have the aim of helping farmers in providing services through mobile technology applications, it was necessary to identify the strategic performance of these companies as a market opportunity in selling their products in the agricultural sector. Therefore, this article aimed to identify the strategic planning of technology companies to provide services through applications to farmers. The methodological approach used is a qualitative approach with the exploratory and descriptive aim of the use of content analysis of the websites of those companies studied. This study concluded that companies by offering technology services to farmers, use these services strategically to your advantage without the knowledge of the real needs of farmers.

Impacts and Implications of Future-oriented Technology Analysis for Policy and Decision Making

OpenAIRE

SARITAS Ozcan; CAGNIN CRISTIANO; HAVAS Attila; MILES Ian

2009-01-01

Most of the papers in this special issue were presented at the Third International Seville Conference on Future-Oriented Technology Analysis (FTA) that took place in October 2008. They address a wide variety of issues in FTA including methods and policy and governance impacts with discussions and demonstrations at the regional and corporate levels.

Cost/benefit analysis comparing ex situ treatment technologies for removing carbon tetrachloride from Hanford groundwater

International Nuclear Information System (INIS)

Truex, M.J.; Brown, D.R.; Elliott, D.B.

1993-05-01

Pacific Northwest Laboratory conducted a cost/benefit and performance analysis to compare ex situ technologies that can be used to destroy the carbon tetrachloride (CCl 4 ) in the ground water of Hanford's 200 West Area. The objective of this work was to provide a direct quantitative and qualitative comparison of competing technologies. The technologies examined included a biological system, the Thermochemical Environmental Energy System II (TEES II), and a UV/oxidation system. The factors examined included key system operation parameters, impact on inorganic contaminants in the ground water, and secondary waste production. The cost effectiveness of these destruction technologies was also compared to the cost for an air stripping/granular activated carbon (AS/GAC) system. While the AS/GAC system appeared to be more cost effective at many levels than the CCl 4 destruction technologies, the secondary waste produced by this system may lead to significant cost and/or regulatory problems. The factors with the greatest influence on cost for each destruction technology are as follows: nutrient requirements for both of the biological systems, electricity requirements and the type of unit operations for the TEES II process, and electricity requirements for UV/oxidation

Analysis of the application of decontamination technologies to radioactive metal waste minimization using expert systems

Energy Technology Data Exchange (ETDEWEB)

Bayrakal, Suna [Iowa State Univ., Ames, IA (United States)

1993-09-30

Radioactive metal waste makes up a significant portion of the waste currently being sent for disposal. Recovery of this metal as a valuable resource is possible through the use of decontamination technologies. Through the development and use of expert systems a comparison can be made of laser decontamination, a technology currently under development at Ames Laboratory, with currently available decontamination technologies for applicability to the types of metal waste being generated and the effectiveness of these versus simply disposing of the waste. These technologies can be technically and economically evaluated by the use of expert systems techniques to provide a waste management decision making tool that generates, given an identified metal waste, waste management recommendations. The user enters waste characteristic information as input and the system then recommends decontamination technologies, determines residual contamination levels and possible waste management strategies, carries out a cost analysis and then ranks, according to cost, the possibilities for management of the waste. The expert system was developed using information from literature and personnel experienced in the use of decontamination technologies and requires validation by human experts and assignment of confidence factors to the knowledge represented within.

Analysis of the application of decontamination technologies to radioactive metal waste minimization using expert systems

International Nuclear Information System (INIS)

Bayrakal, S.

1993-01-01

Radioactive metal waste makes up a significant portion of the waste currently being sent for disposal. Recovery of this metal as a valuable resource is possible through the use of decontamination technologies. Through the development and use of expert systems a comparison can be made of laser decontamination, a technology currently under development at Ames Laboratory, with currently available decontamination technologies for applicability to the types of metal waste being generated and the effectiveness of these versus simply disposing of the waste. These technologies can be technically and economically evaluated by the use of expert systems techniques to provide a waste management decision making tool that generates, given an identified metal waste, waste management recommendations. The user enters waste characteristic information as input and the system then recommends decontamination technologies, determines residual contamination levels and possible waste management strategies, carries out a cost analysis and then ranks, according to cost, the possibilities for management of the waste. The expert system was developed using information from literature and personnel experienced in the use of decontamination technologies and requires validation by human experts and assignment of confidence factors to the knowledge represented within

Information Technology: A Community of Practice. A Workplace Analysis

Science.gov (United States)

Guerrero, Tony

2014-01-01

Information Technology (IT) encompasses all aspects of computing technology. IT is concerned with issues relating to supporting technology users and meeting their needs within an organizational and societal context through the selection, creation, application, integration, and administration of computing technologies (Lunt, et. al., 2008). The…

The Data Envelopment Analysis Method in Benchmarking of Technological Incubators

Directory of Open Access Journals (Sweden)

Bożena Kaczmarska

2010-01-01

Full Text Available This paper presents an original concept for the application of Data Envelopment Analysis (DEA in benchmarking processes within innovation and entrepreneurship centers based on the example of technological incubators. Applying the DEA method, it is possible to order analyzed objects, on the basis of explicitly defined relative efficiency, by compiling a rating list and rating classes. Establishing standards and indicating “clearances” allows the studied objects - innovation and entrepreneurship centers - to select a way of developing effectively, as well as preserving their individuality and a unique way of acting with the account of local needs. (original abstract

Development of regulatory technology for thermal-hydraulic safety analysis

International Nuclear Information System (INIS)

Bang, Young Seok; Lee, S. H.; Ryu, Y. H.

2001-02-01

The present study aims to develop the regulation capability in thermal-hydraulic safety analysis which was required for the reasonable safety regulation in the current NPP, the next generation reactors, and the future-type reactors. The fourth fiscal year of the first phase of the research was focused on the following research topics: Investigation on the current status of the thermal-hydraulic safety analysis technology outside and inside of the country; Review on the improved features of the thermal-hydraulic safety analysis regulatory audit code, RELAP5/MOD3; Assessments of code with LOFT L9-3 ATWS experiment and LSTF SB-SG-10 multiple SGTR experiment; Application of the RELAP5/CANDU code to analyses of SLB and LBLOCA and evaluation of its effect on safety; Application of the code to IAEA PHWR ISP analysis; Assessments of RELAP5 and TRAC with UPTF downcomer injection test and Analysis of LBLOCA with RELAP5 for the performance evaluation of KNGR DVI; Setup of a coupled 3-D kinetics and thermal-hydraulics and application it to a reactivity accident analysis; and Extension of database and improvement of plant input decks. For supporting the resolution of safety issues, loss of RHR event during midloop operation was analyzed for Kori Unit 3, issues on high burnup fuel were reviewed and performance of FRAPCON-3 assessed. Also MSLB was analyzed to figure out the sensitivity of downcomer temperature supporting the PTS risk evaluation of Kori Unit 1. Thermal stratification in pipe was analyzed using the method proposed. And a method predicting the thermal-hydraulic performance of IRWST of KNGR was explored. The PWR ECCS performance criteria was issued as a MOST Article 200-19.and a regulatory guide on evaluation methodology was improved to cover concerns raised from the related licensing review process

Analysis and Synthesis of Leaky-Wave Devices in Planar Technology

Science.gov (United States)

Martinez Ros, Alejandro Javier

The work developed along this doctoral thesis has been focused on the analysis and synthesis of microwave devices in planar technology. In particular, several types of devices based on the radiation mechanism of leaky waves have been studied. Typically, the radiation properties in leaky-wave devices are determined by the complex propagation constant of the leaky mode, wherein the phase constant is responsible for the pointing angle and the leakage rate for the intensity of the radiated fields. In this manner, by controlling both amplitude and phase of the leaky mode, an effective control over the device's radiation diagram can be obtained. Moreover, with the purpose of efficiently obtaining the leaky mode's radiation properties as function of the main geometrical parameters of the structure, several modal tools based on the transverse resonance analysis of the structure have been performed. In order to demonstrate this simultaneous control over the complex propagation constant in planar technology, several types of leaky-wave devices, including antennas (LWAs), multiplexors and near-field focusing systems, have been designed and manufactured in the technology of substrate integrated waveguide (SIW). This recently proposed technology, allows the design of devices based on classical waveguide technology with standard manufacturing techniques used for printed circuit board (PCB) designs. In this way, most of the parts that form a communication system can be integrated into a single substrate, thus reducing its cost and providing a more robust and compact device, which has less losses compared to other planar technologies such as the microstrip. El trabajo llevado a cabo durante la realizacion de esta tesis doctoral, se ha centrado en el analisis y sintesis de dispositivos de microondas en tecnologia planar. En concreto, se han estudiado diferentes tipos de dispositivos basados en radiacion por ondas de fuga "leaky waves", en los cuales las propiedades de radiacion

Analysis of an Interactive Technology Supported Problem-Based Learning STEM Project Using Selected Learning Sciences Interest Areas (SLSIA)

Science.gov (United States)

Kumar, David Devraj

2017-01-01

This paper reports an analysis of an interactive technology-supported, problem-based learning (PBL) project in science, technology, engineering and mathematics (STEM) from a Learning Sciences perspective using the Selected Learning Sciences Interest Areas (SLSIA). The SLSIA was adapted from the "What kinds of topics do ISLS [International…

Assisted reproductive technology in India: A 3 year retrospective data analysis

Directory of Open Access Journals (Sweden)

Narendra Malhotra

2013-01-01

Full Text Available Assisted reproductive technology (ART has grown by leaps and bounds in the last few years. India has one of the highest growths in the ART centers and the number of ART cycles performed every year. Very soon India will be the leader in the world of ART in terms of a number of cycles. With the advances of technology and availability of techniques even in tier II and tier III cities our country, the results still vary dramatically. There is no standardization of protocols and reporting is very inadequate. Furthermore, there are only ART guidelines and no law still exists. Our first and the biggest challenge is to document the tremendous work being done in India and on the basis of analysis of this work, a proper registry can be made and guidance given to all on standardization and improvement. This is the 8 th edition of National ART Registry of India being presented and analyzed.

Changes in abundance and composition of anthropogenic marine debris on the continental slope off the Pacific coast of northern Japan, after the March 2011 Tohoku earthquake

International Nuclear Information System (INIS)

Goto, Tomoaki; Shibata, Haruka

2015-01-01

Highlights: • Benthic marine debris on continental slope off northeastern Japan quantified. • Low density of sea-base sourced debris dominant until 2011 Tohoku earthquake. • Increase in marine debris after the earthquake indicated by post-2011 tsunami survey. • Much increase in land-base sourced debris mainly due to 2011 tsunami. • Additional sources of land-based debris during post-tsunami survey implied. - Abstract: Abundance and composition of anthropogenic marine debris were assessed on the basis of six bottom trawl surveys conducted on the continental slope off Iwate Prefecture, Pacific coast of northern Japan, in 2003, 2004 and 2011, and the temporal changes due to the Tohoku earthquake and tsunami in March 2011 evaluated. In 2003 and 2004, 54–94 items km −2 of marine debris, dominated by sea-base sourced items mainly comprising fishing gear and related items from adjacent fishing grounds on the continental shelf, were quantified. In the post-earthquake period, the density increased drastically to 233–332 items km −2 , due to an increase in land-base sourced items generated by the tsunami. However, a major increase in abundance after the disaster, compared to the total amount of tsunami debris swept into the sea, was not found. Additional sources of land-based debris from the adjacent continental shelf are suggested in the present waters

Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

International Nuclear Information System (INIS)

Moe, Wayne Leland

2015-01-01

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a ''critical path'' for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain ''minimum'' levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial ''first step'' in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by

Decontamination and decommissioning technology tree and the current status of the technologies

Energy Technology Data Exchange (ETDEWEB)

Oh, Won Zin; Won, H.J.; Kim, G.N.; Lee, K.W.; Chol, W.K.; Jung, C.H.; Kim, C.J.; Kim, S.H.; Kwon, S.O.; Chung, C.M

2001-03-01

A technology tree diagram was developed on the basis of the necessary technologies applicable to the decontamination and decommissioning of nuclear facilities. The technology tree diagram is consist of 6 main areas such as characterization, decontamination, decommissioning and remote technology, radwaste management, site restoration, and decommissioning plan and engineering. Characterization is divided into 4 regions such as sampling and data collection, general characterization, chemical analysis and radiological analysis. Decontamination is also divided into 4 regions such as chemical decontamination, mechanical decontamination, the other decontamination technologies and new decontamination technologies. Decommissioning and remote technology area is divided into 4 regions such as cutting techniques, decommissioning technologies, new developing technologies and remote technologies. Radwaste management area is divided into 5 regions such as solid waste treatment, sludge treatment, liquid waste treatment, gas waste treatment and thermal treatment. Site restoration area is divided into 3 regions such as the evaluation of site contamination, soil decontamination and ground water decontamination. Finally, permission, decommissioning process, cost evaluation, quality assurance and the estimation of radionuclide inventory were mentioned in the decommissioning plan and engineering area. The estimated items for each technology are applicable domestic D and D facilities, D and D problem area and contamination/requirement, classification of D and D technology, similar technology, principle and overview of technology, status, science technology needs, implementation needs, reference and contact point.

Decontamination and decommissioning technology tree and the current status of the technologies

International Nuclear Information System (INIS)

Oh, Won Zin; Won, H. J.; Kim, G. N.; Lee, K. W.; Chol, W. K.; Jung, C. H.; Kim, C. J.; Kim, S. H.; Kwon, S. O.; Chung, C. M.

2001-03-01

A technology tree diagram was developed on the basis of the necessary technologies applicable to the decontamination and decommissioning of nuclear facilities. The technology tree diagram is consist of 6 main areas such as characterization, decontamination, decommissioning and remote technology, radwaste management, site restoration, and decommissioning plan and engineering. Characterization is divided into 4 regions such as sampling and data collection, general characterization, chemical analysis and radiological analysis. Decontamination is also divided into 4 regions such as chemical decontamination, mechanical decontamination, the other decontamination technologies and new decontamination technologies. Decommissioning and remote technology area is divided into 4 regions such as cutting techniques, decommissioning technologies, new developing technologies and remote technologies. Radwaste management area is divided into 5 regions such as solid waste treatment, sludge treatment, liquid waste treatment, gas waste treatment and thermal treatment. Site restoration area is divided into 3 regions such as the evaluation of site contamination, soil decontamination and ground water decontamination. Finally, permission, decommissioning process, cost evaluation, quality assurance and the estimation of radionuclide inventory were mentioned in the decommissioning plan and engineering area. The estimated items for each technology are applicable domestic D and D facilities, D and D problem area and contamination/requirement, classification of D and D technology, similar technology, principle and overview of technology, status, science technology needs, implementation needs, reference and contact point

A meta-analysis of the technology acceptance model : investigating subjective norm and moderation effects

NARCIS (Netherlands)

Schepers, J.J.L.; Wetzels, M.G.M.

2007-01-01

We conducted a quantitative meta-analysis of previous research on the technology acceptance model (TAM) in an attempt to make well-grounded statements on the role of subjective norm. Furthermore, we compared TAM results by taking into account moderating effects of one individual-related factor (type

The development of severe accident analysis technology

Energy Technology Data Exchange (ETDEWEB)

Kim, Heuy Dong; Cho, Sung Won; Kim, Sang Baek; Park, Jong Hwa; Lee, Kyu Jung; Park, Lae Joon; Hu, Hoh; Hong, Sung Wan [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1993-07-01

The objective of the development of severe accident analysis technology is to understand the severe accident phenomena such as core melt progression and to provide a reliable analytical tool to assess severe accidents in a nuclear power plant. Furthermore, establishment of the accident management strategies for the prevention/mitigation of severe accidents is also the purpose of this research. The study may be categorized into three areas. For the first area, two specific issues were reviewed to identify the further research direction, that is the natural circulation in the reactor coolant system and the fuel-coolant interaction as an in-vessel and an ex-vessel phenomenological study. For the second area, the MELCOR and the CONTAIN codes have been upgraded, and a validation calculation of the MELCOR has been performed for the PHEBUS-B9+ experiment. Finally, the experimental program has been established for the in-vessel and the ex-vessel severe accident phenomena with the in-pile test loop in KMRR and the integral containment test facilities, respectively. (Author).

A life cycle assessment and economic analysis of the Scum-to-Biodiesel technology in wastewater treatment plants.

Science.gov (United States)

Mu, Dongyan; Addy, Min; Anderson, Erik; Chen, Paul; Ruan, Roger

2016-03-01

This study used life cycle assessment and technical economic analysis tools in evaluating a novel Scum-to-Biodiesel technology and compares the technology with scum digestion and combustion processes. The key variables that control environmental and economic performance are identified and discussed. The results show that all impacts examined for the Scum-to-Biodiesel technology are below zero indicating significant environmental benefits could be drawn from it. Of the three technologies examined, the Scum-to-Biodiesel technology has the best environmental performance in fossil fuel depletion, GHG emissions, and eutrophication, whereas combustion has the best performance on acidification. Of all process inputs assessed, process heat, glycerol, and methanol uses had the highest impacts, much more than any other inputs considered. The Scum-to-Biodiesel technology also makes higher revenue than other technologies. The diesel price is a key variable for its economic performance. The research demonstrates the feasibility and benefits in developing Scum-to-Biodiesel technology in wastewater treatment facilities. Copyright © 2015 Elsevier Ltd. All rights reserved.

Mobile Health Technology Interventions for Suicide Prevention: Protocol for a Systematic Review and Meta-Analysis.

Science.gov (United States)

Melia, Ruth; Francis, Kady; Duggan, Jim; Bogue, John; O'Sullivan, Mary; Chambers, Derek; Young, Karen

2018-01-26

Previous research has reported that two of the major barriers to help-seeking for individuals at risk of suicide are stigma and geographical isolation. Mobile technology offers a potential means of delivering evidence-based interventions with greater specificity to the individual, and at the time that it is needed. Despite documented motivation by at-risk individuals to use mobile technology to track mental health and to support psychological interventions, there is a shortfall of outcomes data on the efficacy of mobile health (mHealth) technology on suicide-specific outcomes. The objective of this study is to develop a protocol for a systematic review and meta-analysis that aims to evaluate the effectiveness of mobile technology-based interventions for suicide prevention. The search includes the Cochrane Central Register of Controlled Trials (CENTRAL: The Cochrane Library), MEDLINE, Embase, PsycINFO, CRESP and relevant sources of gray literature. Studies that have evaluated psychological or nonpsychological interventions delivered via mobile computing and communication technology, and have suicidality as an outcome measure will be included. Two authors will independently extract data and assess the study suitability in accordance with the Cochrane Collaboration Risk of Bias Tool. Studies will be included if they measure at least one suicide outcome variable (ie, suicidal ideation, suicidal intent, nonsuicidal self-injurious behavior, suicidal behavior). Secondary outcomes will be measures of symptoms of depression. Where studies are sufficiently homogenous and reported outcomes are amenable for pooled synthesis, meta-analysis will be performed. A narrative synthesis will be conducted if the data is unsuitable for a meta-analysis. The review is in progress, with findings expected by summer 2018. To date, evaluations of mobile technology-based interventions in suicide prevention have focused on evaluating content as opposed to efficacy. Indeed, previous research has

Identifying Multimedia Production Competencies and Skills of Instructional Design and Technology Professionals: An Analysis of Recent Job Postings

Science.gov (United States)

Sugar, William; Hoard, Brent; Brown, Abbie; Daniels, Lee

2012-01-01

In an effort to document necessary multimedia production competencies of Instructional Design and Technology graduates, a recent analysis of over 7 months' worth of Instructional Design and Technology job advertisements (n = 615) were conducted. Specific job skills from these postings were categorized and analyzed. The data set includes three job…

Analysis of Global CCS Technology, Regulations and Its Potential for Emission Reduction with Focus on China

OpenAIRE

Fan, Ying; Zhu, Lei; Zhang, Xiaobing

2011-01-01

This paper introduces the development of Carbon Capture and Storage (CCS) technology, the progress in CCS demonstration projects, and regulations and policies related to CCS. Barriers and limitations for the large-scale deployment of CCS are discussed. CCS and different technological solutions for emission reduction (e.g., energy conservation and renewable energy) are compared. The analysis shows that China should carefully evaluate the negative impacts of CCS deployment and needs to enhance ...

System description for DART (Decision Analysis for Remediation Technologies)

International Nuclear Information System (INIS)

Nonte, J.; Bolander, T.; Nickelson, D.; Nielson, R.; Richardson, J.; Sebo, D.

1997-09-01

DART is a computer aided system populated with influence models to determine quantitative benefits derived by matching requirements and technologies. The DART database is populated with data from over 900 DOE sites from 10 Field Offices. These sites are either source terms, such as buried waste pits, or soil or groundwater contaminated plumes. The data, traceable to published documents, consists of site-specific data (contaminants, area, volume, depth, size, remedial action dates, site preferred remedial option), problems (e.g., offsite contaminant plume), and Site Technology Coordinating Group (STCG) need statements (also contained in the Ten-Year Plan). DART uses this data to calculate and derive site priorities, risk rankings, and site specific technology requirements. DART is also populated with over 900 industry and DOE SCFA technologies. Technology capabilities can be used to match technologies to waste sites based on the technology''s capability to meet site requirements and constraints. Queries may be used to access, sort, roll-up, and rank site data. Data roll-ups may be graphically displayed

Benefits and Pitfalls of Multimedia and Interactive Features in Technology-Enhanced Storybooks: A Meta-Analysis.

Science.gov (United States)

Takacs, Zsofia K; Swart, Elise K; Bus, Adriana G

2015-12-01

A meta-analysis was conducted on the effects of technology-enhanced stories for young children's literacy development when compared to listening to stories in more traditional settings like storybook reading. A small but significant additional benefit of technology was found for story comprehension (g+ = 0.17) and expressive vocabulary (g+ = 0.20), based on data from 2,147 children in 43 studies. When investigating the different characteristics of technology-enhanced stories, multimedia features like animated pictures, music, and sound effects were found beneficial. In contrast, interactive elements like hotspots, games, and dictionaries were found to be distracting. Especially for children disadvantaged because of less stimulating family environments, multimedia features were helpful and interactive features were detrimental. Findings are discussed from the perspective of cognitive processing theories.

Part I.2: Perspectives on Technological Transformation

DEFF Research Database (Denmark)

Müller, Jens

2003-01-01

The article defines the technology concept as knowledge, organisation, technique and product, and describes the processes for technology analysis.......The article defines the technology concept as knowledge, organisation, technique and product, and describes the processes for technology analysis....

Technology certification and technology acceptance: Promoting interstate cooperation and market development for innovative technologies

International Nuclear Information System (INIS)

Brockbank, B.R.

1995-03-01

In the past two years, public and private efforts to promote development and deployment of innovative environmental technologies have shifted from the analysis of barriers to the implementation of a variety of initiatives aimed at surmounting those barriers. Particular attention has been directed at (1) streamlining fragmented technology acceptance processes within and among the states, and (2) alleviating disincentives, created by inadequate or unverified technology cost and performance data, for users and regulators to choose innovative technologies. Market fragmentation currently imposes significant cost burdens on technology developers and inhibits the investment of private capital in environmental technology companies. Among the responses to these problems are state and federal technology certification/validation programs, efforts to standardize cost/performance data reporting, and initiatives aimed at promoting interstate cooperation in technology testing and evaluation. This paper reviews the current status of these initiatives, identifies critical challenges to their success, and recommends strategies for addressing those challenges

The HTA Risk Analysis Chart: Visualising the Need for and Potential Value of Managed Entry Agreements in Health Technology Assessment.

Science.gov (United States)

Grimm, Sabine Elisabeth; Strong, Mark; Brennan, Alan; Wailoo, Allan J

2017-12-01

Recent changes to the regulatory landscape of pharmaceuticals may sometimes require reimbursement authorities to issue guidance on technologies that have a less mature evidence base. Decision makers need to be aware of risks associated with such health technology assessment (HTA) decisions and the potential to manage this risk through managed entry agreements (MEAs). This work develops methods for quantifying risk associated with specific MEAs and for clearly communicating this to decision makers. We develop the 'HTA risk analysis chart', in which we present the payer strategy and uncertainty burden (P-SUB) as a measure of overall risk. The P-SUB consists of the payer uncertainty burden (PUB), the risk stemming from decision uncertainty as to which is the truly optimal technology from the relevant set of technologies, and the payer strategy burden (PSB), the additional risk of approving a technology that is not expected to be optimal. We demonstrate the approach using three recent technology appraisals from the UK National Institute for Health and Clinical Excellence (NICE), each of which considered a price-based MEA. The HTA risk analysis chart was calculated using results from standard probabilistic sensitivity analyses. In all three HTAs, the new interventions were associated with substantial risk as measured by the P-SUB. For one of these technologies, the P-SUB was reduced to zero with the proposed price reduction, making this intervention cost effective with near complete certainty. For the other two, the risk reduced substantially with a much reduced PSB and a slightly increased PUB. The HTA risk analysis chart shows the risk that the healthcare payer incurs under unresolved decision uncertainty and when considering recommending a technology that is not expected to be optimal given current evidence. This allows the simultaneous consideration of financial and data-collection MEA schemes in an easily understood format. The use of HTA risk analysis charts will

Use of Emerging Grid Computing Technologies for the Analysis of LIGO Data

Science.gov (United States)

Koranda, Scott

2004-03-01

The LIGO Scientific Collaboration (LSC) today faces the challenge of enabling analysis of terabytes of LIGO data by hundreds of scientists from institutions all around the world. To meet this challenge the LSC is developing tools, infrastructure, applications, and expertise leveraging Grid Computing technologies available today, and making available to LSC scientists compute resources at sites across the United States and Europe. We use digital credentials for strong and secure authentication and authorization to compute resources and data. Building on top of products from the Globus project for high-speed data transfer and information discovery we have created the Lightweight Data Replicator (LDR) to securely and robustly replicate data to resource sites. We have deployed at our computing sites the Virtual Data Toolkit (VDT) Server and Client packages, developed in collaboration with our partners in the GriPhyN and iVDGL projects, providing uniform access to distributed resources for users and their applications. Taken together these Grid Computing technologies and infrastructure have formed the LSC DataGrid--a coherent and uniform environment across two continents for the analysis of gravitational-wave detector data. Much work, however, remains in order to scale current analyses and recent lessons learned need to be integrated into the next generation of Grid middleware.

Heart rhythm analysis using ECG recorded with a novel sternum based patch technology

DEFF Research Database (Denmark)

Saadi, Dorthe Bodholt; Fauerskov, Inge; Osmanagic, Armin

2013-01-01

, reliable long-term ECG recordings. The device is designed for high compliance and low patient burden. This novel patch technology is CE approved for ambulatory ECG recording of two ECG channels on the sternum. This paper describes a clinical pilot study regarding the usefulness of these ECG signals...... for heart rhythm analysis. A clinical technician with experience in ECG interpretation selected 200 noise-free 7 seconds ECG segments from 25 different patients. These 200 ECG segments were evaluated by two medical doctors according to their usefulness for heart rhythm analysis. The first doctor considered...... 98.5% of the segments useful for rhythm analysis, whereas the second doctor considered 99.5% of the segments useful for rhythm analysis. The conclusion of this pilot study indicates that two channel ECG recorded on the sternum is useful for rhythm analysis and could be used as input to diagnosis...

Experimental investigation of thermal neutron analysis based landmine detection technology

International Nuclear Information System (INIS)

Zeng Jun; Chu Chengsheng; Ding Ge; Xiang Qingpei; Hao Fanhua; Luo Xiaobing

2013-01-01

Background: Recently, the prompt gamma-rays neutron activation analysis method is wildly used in coal analysis and explosive detection, however there were less application about landmine detection using neutron method especially in the domestic research. Purpose: In order to verify the feasibility of Thermal Neutron Analysis (TNA) method used in landmine detection, and explore the characteristic of this technology. Methods: An experimental system of TNA landmine detection was built based on LaBr 3 (Ce) fast scintillator detector and 252 Cf isotope neutron source. The system is comprised of the thermal neutron transition system, the shield system, and the detector system. Results: On the basis of the TNA, the wide energy area calibration method especially to the high energy area was investigated, and the least detection time for a typical mine was defined. In this study, the 72-type anti-tank mine, the 500 g TNT sample and several interferential objects are tested in loess, red soil, magnetic soil and sand respectively. Conclusions: The experimental results indicate that TNA is a reliable demining method, and it can be used to confirm the existence of Anti-Tank Mines (ATM) and large Anti-Personnel Mines (APM) in complicated condition. (authors)

Urban Analysis and Smart Communities: An Approach to the Use of Technology in Everyday Mobility

Directory of Open Access Journals (Sweden)

Zurisaddai De la Cruz Severiche Maury

2015-01-01

Full Text Available Concentration of population in urban centers is a global problem for which different strategies in order to organize different processes in cities and improve the quality of life are required. The creation of smart communities is shown as a sustainable solution since they deal with various key aspects, such as traffic management and mobility, through the use of information technologies (ITs. This work presents a review of recent studies using information technologies for urban analysis and mobility in cities. A descriptive analysis of automated methods for collecting and analyzing citizens’ mobility patterns is performed; it is centered in smart card use, geolocation and geotagging. It is concluded that a robust communication infrastructure, supported by an efficient computational platform allowing big data management and ubiquitous computing, is a crucial aspect for urban management in a smart community

Experience curve analysis on South Korean nuclear technology and comparative analysis with South Korean renewable technologies

International Nuclear Information System (INIS)

Kim, Dong Wook; Chang, Hyun Joon

2012-01-01

Increasing awareness on environmental damage and climate change has induced many nations to engage in green growth. South Korea, as one of the largest consumers of energy, is no exception and has shown its determination to pursue green growth in the future. In order to do so, South Korea plans to substitute fossil fuel with alternative sources in electricity generation. However, the key constraint to green growth is the high cost faced by renewable electricity generation. Fortunately, nuclear energy can serve as an economic alternative to fossil fuel. To achieve CO 2 emission reduction and faster economic growth, it is wise to analyze prospects of alternatives using experience curve framework. The results and industry background are consistent for nuclear technology, and the results suggest that nuclear should serve as the main substitute. Consideration of policy risk inherent in renewable also strengthens the argument. Renewable technologies, on the other hand, showed overstated learning capacity that is partially inconsistent with technological background. Nevertheless, the renewable (photovoltaic and fuel cell) should help nuclear marginally in substituting fossil fuel in South Korea's Electricity Generation. - Highlights: ► Progress ratios of renewable energy show great prospect. ► The policy risk is inherent in renewable and may overestimate its prospect. ► Nuclear sources are economic and less affected by policy risk. ► Fuel cell and photovoltaic should help nuclear marginally in green growth.

Factor analysis for the adoption of nuclear technology in diagnosis and treatment of chronic diseases

International Nuclear Information System (INIS)

Sato, Renato Cesar; Zouain, Desiree Moraes

2012-01-01

To identify and evaluate latent variables (variables that are not directly observed) for adopting and using nuclear technologies in diagnosis and treatment of chronic diseases. The measurement and management of these latent factors are important for health care due to complexities of the sector. Methods: An exploratory factor analysis study was conducted among 52 physicians practicing in the areas of Cardiology, Neurology and Oncology in the State of Sao Paulo who agreed to participate in the study between 2009 and 2010. Data were collected using an attitude measurement questionnaire, and analyzed according to the principal component method with Varimax rotation. Results: The component matrix after factor rotation showed three elucidative groups arranged according to demand for nuclear technology: clinical factors, structural factors, and technological factors. Clinical factors included questionnaire answers referring to medical history, previous interventions, complexity and chronicity of the disease. Structural factors included patient age, physician's practice area, and payment ability. Technological factors included prospective growth in the use of nuclear technology and availability of services. Conclusions: The clinical factors group dimension identified in the study included patient history, prior interventions, and complexity and chronicity of the disease. This dimension is the main motivating for adopting nuclear technology in diagnosis and treatment of chronic diseases. (author)

A Survey of Key Technology of Network Public Opinion Analysis

Directory of Open Access Journals (Sweden)

Li Su Ying

2016-01-01

Full Text Available The internet has become an important base for internet users to make comments because of its interactivity and fast dissemination. The outbreak of internet public opinion has become a major risk for network information security. Domestic and foreign researchers had carried out extensive and in-depth study on public opinion. Fruitful results have achieved in the basic theory research and emergency handling and other aspects of public opinion. But research on the public opinion in China is still in the initial stage, the key technology of the public opinion analysis is still as a starting point for in-depth study and discussion.

Long-term affected energy production of waste to energy technologies identified by use of energy system analysis.

Science.gov (United States)

Münster, M; Meibom, P

2010-12-01

Affected energy production is often decisive for the outcome of consequential life-cycle assessments when comparing the potential environmental impact of products or services. Affected energy production is however difficult to determine. In this article the future long-term affected energy production is identified by use of energy system analysis. The focus is on different uses of waste for energy production. The Waste-to-Energy technologies analysed include co-combustion of coal and waste, anaerobic digestion and thermal gasification. The analysis is based on optimization of both investments and production of electricity, district heating and bio-fuel in a future possible energy system in 2025 in the countries of the Northern European electricity market (Denmark, Norway, Sweden, Finland and Germany). Scenarios with different CO(2) quota costs are analysed. It is demonstrated that the waste incineration continues to treat the largest amount of waste. Investments in new waste incineration capacity may, however, be superseded by investments in new Waste-to-Energy technologies, particularly those utilising sorted fractions such as organic waste and refuse derived fuel. The changed use of waste proves to always affect a combination of technologies. What is affected varies among the different Waste-to-Energy technologies and is furthermore dependent on the CO(2) quota costs and on the geographical scope. The necessity for investments in flexibility measures varies with the different technologies such as storage of heat and waste as well as expansion of district heating networks. Finally, inflexible technologies such as nuclear power plants are shown to be affected. Copyright © 2010 Elsevier Ltd. All rights reserved.

Cookstove options for safety and health: Comparative analysis of technological and usability attributes

International Nuclear Information System (INIS)

Kimemia, David; Van Niekerk, Ashley

2017-01-01

Energy use in low-income households in South Africa is considerably more hazardous than in middle to high-income households. Poverty is a key underlying factor. However, poor quality domestic energy technologies, including stoves, heaters and light sources contribute to this vulnerability. The problem is compounded by behavioural and environmental factors. Since cooking is a key energy-using chore, access to efficient, safe and versatile stoves portend safety improvements. This paper reports on a comparative analysis of eleven technological and usability attributes (CO emissions, firepower, efficiency, fuel toxicity, fuel cost, stove price, controllability, durability, availability, temperature of touchable-parts, and mechanical stability) of commercially available stoves that utilise four energy sources (kerosene, methanol, ethanol gel, and LPG). The ensuing discussion serves as a guide to enable the selection of the best-fit stove-fuel combination for low-income households. The findings indicate that LPG stoves have comparatively better overall rankings for cleanliness, firepower, safety, and durability. This analysis highlights that no combustion technology is risk-proof and there remains a burden on users to exercise diligence. We recommend that South Africa adopts an affirmative policy and strategic actions that discourage the use of kerosene as a household combustion fuel, and promotes the adoption of LPG as a safer and practical alternative. - Highlights: • Inefficient fuel combustion stoves raise risk profile in energy-poor households. • This study uses quantitative methods to compare the attributes of four stove types. • LPG stoves have comparatively better ranking for emissions, safety, and durability. • Transformative policies and strategies are required to promote safe, clean stoves.

New Technologies of Information and Communications from a Science, Technology and Society.

Directory of Open Access Journals (Sweden)

Manuel Martín Rodríguez

2012-03-01

Full Text Available With this work we want to make a short analysis of the New Technologies of Information and Communications in basic aspects of interest to technology education, refered to it from a Science Technology and Society (CTS. Based on different conceptions of technology and technological literacy, considers issues such as beliefs about the nature of technological knowledge, relationships and differences between scientific knowledge and the interactions between technology and society, the interests and attitudes of teachers and students to technology and learning from the perspective of education and, finally, various approaches to technology education programs following the approaches Science, Technology and Society.

Miniaturization for Point-of-Care Analysis: Platform Technology for Almost Every Biomedical Assay.

Science.gov (United States)

Schumacher, Soeren; Sartorius, Dorian; Ehrentreich-Förster, Eva; Bier, Frank F

2012-10-01

Platform technologies for the changing need of diagnostics are one of the main challenges in medical device technology. From one point-of-view the demand for new and more versatile diagnostic is increasing due to a deeper knowledge of biomarkers and their combination with diseases. From another point-of-view a decentralization of diagnostics will occur since decisions can be made faster resulting in higher success of therapy. Hence, new types of technologies have to be established which enables a multiparameter analysis at the point-of-care. Within this review-like article a system called Fraunhofer ivD-platform is introduced. It consists of a credit-card sized cartridge with integrated reagents, sensors and pumps and a read-out/processing unit. Within the cartridge the assay runs fully automated within 15-20 minutes. Due to the open design of the platform different analyses such as antibody, serological or DNA-assays can be performed. Specific examples of these three different assay types are given to show the broad applicability of the system.

System analysis for technology transfer readiness assessment of horticultural postharvest

Science.gov (United States)

Hayuningtyas, M.; Djatna, T.

2018-04-01

Availability of postharvest technology is becoming abundant, but only a few technologies are applicable and useful to a wider community purposes. Based on this problem it requires a significant readiness level of transfer technology approach. This system is reliable to access readiness a technology with level, from 1-9 and to minimize time of transfer technology in every level, time required technology from the selection process can be minimum. Problem was solved by using Relief method to determine ranking by weighting feasible criteria on postharvest technology in each level and PERT (Program Evaluation Review Technique) to schedule. The results from ranking process of post-harvest technology in the field of horticulture is able to pass level 7. That, technology can be developed to increase into pilot scale and minimize time required for technological readiness on PERT with optimistic time of 7,9 years. Readiness level 9 shows that technology has been tested on the actual conditions also tied with estimated production price compared to competitors. This system can be used to determine readiness of technology innovation that is derived from agricultural raw materials and passes certain stages.

Toward a Technology of Derived Stimulus Relations: An Analysis of Articles Published in the "Journal of Applied Behavior Analysis," 1992-2009

Science.gov (United States)

Rehfeldt, Ruth Anne

2011-01-01

Every article on stimulus equivalence or derived stimulus relations published in the "Journal of Applied Behavior Analysis" was evaluated in terms of characteristics that are relevant to the development of applied technologies: the type of participants, settings, procedure automated vs. tabletop), stimuli, and stimulus sensory modality; types of…

A sensitivity analysis of process design parameters, commodity prices and robustness on the economics of odour abatement technologies.

Science.gov (United States)

Estrada, José M; Kraakman, N J R Bart; Lebrero, Raquel; Muñoz, Raúl

2012-01-01

The sensitivity of the economics of the five most commonly applied odour abatement technologies (biofiltration, biotrickling filtration, activated carbon adsorption, chemical scrubbing and a hybrid technology consisting of a biotrickling filter coupled with carbon adsorption) towards design parameters and commodity prices was evaluated. Besides, the influence of the geographical location on the Net Present Value calculated for a 20 years lifespan (NPV20) of each technology and its robustness towards typical process fluctuations and operational upsets were also assessed. This comparative analysis showed that biological techniques present lower operating costs (up to 6 times) and lower sensitivity than their physical/chemical counterparts, with the packing material being the key parameter affecting their operating costs (40-50% of the total operating costs). The use of recycled or partially treated water (e.g. secondary effluent in wastewater treatment plants) offers an opportunity to significantly reduce costs in biological techniques. Physical/chemical technologies present a high sensitivity towards H2S concentration, which is an important drawback due to the fluctuating nature of malodorous emissions. The geographical analysis evidenced high NPV20 variations around the world for all the technologies evaluated, but despite the differences in wage and price levels, biofiltration and biotrickling filtration are always the most cost-efficient alternatives (NPV20). When, in an economical evaluation, the robustness is as relevant as the overall costs (NPV20), the hybrid technology would move up next to BTF as the most preferred technologies. Copyright © 2012 Elsevier Inc. All rights reserved.

Testing and analysis SDN technology

Directory of Open Access Journals (Sweden)

Taher Abdullah

2014-10-01

Full Text Available The Software Defined Networking (SDN is currently one of the most promising technologies in mobile backhaul networks based on the OpenFlow protocol. OpenFlow provides a specification to migrate the control logic from a switch into the controller. In this paper we apply Mininet software to verify the OpenFlow protocol messages.

Analysis of technology and seminar on economic trends about High-intensity LED

International Nuclear Information System (INIS)

2003-09-01

This is divided into two parts. Contents of this report in the first part are technical trends on high-intensity LED which reports introduction of LED as compound semiconductor, white LED? patent issues, review on technology of High-intensity LED and Reliability of High-intensity LED. The second part deals with economic tends about High-intensity LED. This seminar was held to report analysis and economical trends about High-intensity LED by Korea Industrial Education Institute in 2003.

Silicon ribbon technology assessment 1978-1986 - A computer-assisted analysis using PECAN

Science.gov (United States)

Kran, A.

1978-01-01

The paper presents a 1978-1986 economic outlook for silicon ribbon technology based on the capillary action shaping technique. The outlook is presented within the framework of two sets of scenarios, which develop strategy for approaching the 1986 national energy capacity cost objective of $0.50/WE peak. The PECAN (Photovoltaic Energy Conversion Analysis) simulation technique is used to develop a 1986 sheet material price ($50/sq m) which apparently can be attained without further scientific breakthrough.

Quality Assurance in Environmental Technology Verification (ETV): Analysis and Impact on the EU ETV Pilot Programme Performance

Science.gov (United States)

Molenda, Michał; Ratman-Kłosińska, Izabela

2018-03-01

Many innovative environmental technologies never reach the market because they are new and cannot demonstrate a successful track record of previous applications. This fact is a serious obstacle on their way to the market. Lack of credible data on the performance of a technology causes mistrust of investors in innovations, especially from public sector, who seek effective solutions however without compromising the technical and financial risks associated with their implementation. Environmental technology verification (ETV) offers a credible, robust and transparent process that results in a third party confirmation of the claims made by the providers about the performance of the novel environmental technologies. Verifications of performance are supported by high quality, independent test data. In that way ETV as a tool helps establish vendor credibility and buyer confidence. Several countries across the world have implemented ETV in the form of national or regional programmes. ETV in the European Union was implemented as a voluntary scheme if a form of a pilot programme. The European Commission launched the Environmental Technology Pilot Programme of the European Union (EU ETV) in 2011. The paper describes the European model of ETV set up and put to operation under the Pilot Programme of Environmental Technologies Verification of the European Union. The goal, objectives, technological scope, involved entities are presented. An attempt has been made to summarise the results of the EU ETV scheme performance available for the period of 2012 when the programme has become fully operational until the first half of 2016. The study was aimed at analysing the overall organisation and efficiency of the EU ETV Pilot Programme. The study was based on the analysis of the documents the operation of the EU ETV system. For this purpose, a relevant statistical analysis of the data on the performance of the EU ETV system provided by the European Commission was carried out.

Large scale meta-analysis of fragment-based screening campaigns: privileged fragments and complementary technologies.

Science.gov (United States)

Kutchukian, Peter S; Wassermann, Anne Mai; Lindvall, Mika K; Wright, S Kirk; Ottl, Johannes; Jacob, Jaison; Scheufler, Clemens; Marzinzik, Andreas; Brooijmans, Natasja; Glick, Meir

2015-06-01

A first step in fragment-based drug discovery (FBDD) often entails a fragment-based screen (FBS) to identify fragment "hits." However, the integration of conflicting results from orthogonal screens remains a challenge. Here we present a meta-analysis of 35 fragment-based campaigns at Novartis, which employed a generic 1400-fragment library against diverse target families using various biophysical and biochemical techniques. By statistically interrogating the multidimensional FBS data, we sought to investigate three questions: (1) What makes a fragment amenable for FBS? (2) How do hits from different fragment screening technologies and target classes compare with each other? (3) What is the best way to pair FBS assay technologies? In doing so, we identified substructures that were privileged for specific target classes, as well as fragments that were privileged for authentic activity against many targets. We also revealed some of the discrepancies between technologies. Finally, we uncovered a simple rule of thumb in screening strategy: when choosing two technologies for a campaign, pairing a biochemical and biophysical screen tends to yield the greatest coverage of authentic hits. © 2014 Society for Laboratory Automation and Screening.

Innovative Molecular Analysis Technologies Program Funding Opportunities | Office of Cancer Clinical Proteomics Research

Science.gov (United States)

The NCI is very pleased to announce that the Innovative Molecular Analysis Technologies (IMAT) program funding opportunity announcements have been posted for calendar year (CY) 2013. Please visit this website for more information on these announcements. For your convenience, a link to each solicitation is provided below with associated submission deadlines for new applications and resubmissions. Please contact the NCI IMAT program director, Dr.

Advanced energy technologies and climate change: An analysis using the Global Change Assessment Model (GCAM)

International Nuclear Information System (INIS)

Edmonds, J.; Wise, M.; MacCracken, C.

1994-01-01

The authors report results from a ''top down'' energy-economy model employing ''bottom up'' assumptions and embedded in an integrated assessment framework, GCAM. The analysis shows that, from the perspective of long-term energy system development, differences in results from the ''top down'' and ''bottom up'' research communities would appear to be more closely linked to differences in assumptions regarding the economic cost associated with advanced technologies than to differences in modeling approach. The adoption of assumptions regarding advanced energy technologies were shown to have a profound effect on the future rate of anthropogenic climate change. The cumulative effect of the five sets of advanced energy technologies is to reduce annual emissions from fossil fuel use to levels which stabilize atmospheric concentrations below 550 ppmv, the point at which atmospheric concentrations are double those that existed in the middle of the eighteenth century. The consideration of all greenhouse gases, and in particular sulfur, leads to some extremely interesting results that the rapid deployment of advanced energy technologies leads to higher temperatures prior to 2050 than in the reference case. This is due to the fact that the advanced energy technologies reduce sulfur emissions as well as those of carbon. The short-term cooling impact of sulfur dominates the long-term warming impact of CO 2 and CH 4 . While all energy technologies play roles, the introduction of advanced biomass energy production technology plays a particularly important role. 16 refs., 12 figs., 3 tabs

FY 1998 report on the results of the development of the utilization technology of biological resources such as bioconsortia. Development of the consortium based analysis technology; 1998 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei kaiseki gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the purpose of establishing the analysis technology and industrial utilization technology required for the establishment of the utilization technology of consortia's high functions which are already used in the fermentation technology field over the limit of the conventional bio-technology using functions of single biological species, study was made to look for the consortium based analysis technology by which the consortium base can be analyzed as it is using the molecular biological method. Studies were made in the following four fields: 1) new identification technology of eucaryote using II DNA topoisomerase genes (PCR amplification method of II DNA topoisomerase genes); 2) method to detect new recognition peptide activated microorganism (adjustment of cortical antigen); 3) technology to elucidate detection/response mechanism of the specific environment and adaptation/resistance mechanism of the specific environment; 4) incubation method inside 3D matrices. In 3), studies were made of the analysis of inhibition mechanism of korormicin and separation of solvent-resistant oil degradable bacteria. In 4), for the settlement and dynamic analysis of microorganism consortium by studying incubation conditions, conducted was the molecular system analysis of bacteria and eumycetes inhabiting in sponge. (NEDO)

Investments in technology subject to uncertainty. Analysis and policy

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard

1997-01-01

Investments in technology are today of such a magnitude that it matters. In the paper there are three important questions. First on the question in which sense technological uncertainty can be said to be a problem. Second on strategies for diminishing technological uncertainties. Three on policy...

Technologies in organic farming

DEFF Research Database (Denmark)

Lassen, Jesper

2015-01-01

the nutrient gap by recycling sewage sludge, and in particular the criteria applied when these technologies are assessed, are analysed. This part of the analysis shows how organic consumers base their assessment of alternative strategies and technologies primarily on concerns about environmental risks...... to phase out their use of conventional manure before 2021. This, however, raises a number of questions about consumers’ acceptance of the alternative technologies that have been proposed to close the nutrient gap. Drawing on qualitative interviews with Danish organic consumers, this paper first discusses...... what, from a consumers perspective, characterizes the technologies consumers associate with organic production. This part of the analysis shows that by and large consumers regard organic technologies as the opposite of conventional farming. Second, consumers’ perceptions of solutions suggested to close...

Robotics Technology Crosscutting Program. Technology summary

International Nuclear Information System (INIS)

1995-06-01

The Robotics Technology Development Program (RTDP) is a needs-driven effort. A length series of presentations and discussions at DOE sites considered critical to DOE's Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the resulting robotics needs assessment revealed several common threads running through the sites: Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination and Dismantlement (D and D). The RTDP Group also realized that some of the technology development in these four areas had common (Cross Cutting-CC) needs, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) process urged an additional organizational breakdown between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). These factors lead to the formation of the fifth application area for Crosscutting and Advanced Technology (CC and AT) development. The RTDP is thus organized around these application areas -- TWR, CAA, MWO, D and D, and CC and AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas

Robotics Technology Crosscutting Program. Technology summary

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

The Robotics Technology Development Program (RTDP) is a needs-driven effort. A length series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the resulting robotics needs assessment revealed several common threads running through the sites: Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination and Dismantlement (D and D). The RTDP Group also realized that some of the technology development in these four areas had common (Cross Cutting-CC) needs, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) process urged an additional organizational breakdown between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). These factors lead to the formation of the fifth application area for Crosscutting and Advanced Technology (CC and AT) development. The RTDP is thus organized around these application areas -- TWR, CAA, MWO, D and D, and CC and AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.

Analysis of methodology for designing education and training model for professional development in the field of radiation technology

Energy Technology Data Exchange (ETDEWEB)

Kim, Kon Wuk; Lee, Jae Hun; Park, Tai Jin; Song, Myung Jae [Korean Association for Radiation Application, Seoul (Korea, Republic of)

2015-02-15

The domestic Radiation Technology is integrated into and utilized in various areas and is closely related to the industrial growth in Korea. The domestic use of radiation and RI (Radioisotope) increases in quantity every year, however the level of technology is poor when compared to other developed countries. Manpower training is essential for the development of Radiation Technology. Therefore, this study aimed to propose a methodology for designing systemic education and training model in the field of measurement and analysis of radiation. A survey was conducted to design education and training model and the training program for measurement and analysis of radiation was developed based on the survey results. The education and training program designed in this study will be utilized as a model for evaluating the professional development and effective recruitment of the professional workforce, and can be further applied to other radiation-related fields.

Analysis of methodology for designing education and training model for professional development in the field of radiation technology

International Nuclear Information System (INIS)

Kim, Kon Wuk; Lee, Jae Hun; Park, Tai Jin; Song, Myung Jae

2015-01-01

The domestic Radiation Technology is integrated into and utilized in various areas and is closely related to the industrial growth in Korea. The domestic use of radiation and RI (Radioisotope) increases in quantity every year, however the level of technology is poor when compared to other developed countries. Manpower training is essential for the development of Radiation Technology. Therefore, this study aimed to propose a methodology for designing systemic education and training model in the field of measurement and analysis of radiation. A survey was conducted to design education and training model and the training program for measurement and analysis of radiation was developed based on the survey results. The education and training program designed in this study will be utilized as a model for evaluating the professional development and effective recruitment of the professional workforce, and can be further applied to other radiation-related fields

The Design of WORKER'S Behavior Analysis Method in Workplace Using Indoor Positioning Technology

Science.gov (United States)

Tabata, K.; Konno, H.; Nakajima, M.

2016-06-01

This study presents a method for analyzing workers' behavior using indoor positioning technology and field test in the workplace. Recently, various indoor positioning methods, such as Wi-Fi, Bluetooth low energy (BLE), visible light communication, Japan's indoor messaging system, ultra-wide band (UWB), and pedestrian dead reckoning (PDR), have been investigated. The development of these technologies allows tracking of movement of both people and/or goods in indoor spaces, people and/or goods behavior analysis is expected as one of the key technologies for operation optimization. However, when we use these technologies for human tracking, there are some problem as follows. 1) Many cases need to use dedicated facilities (e.g. UWB). 2) When we use smartphone as sensing device, battery depletion is one of the big problem (especially using PDR). 3) the accuracy is instability for tracking (e.g. Wi-Fi). Based on these matters, in this study we designed and developed an indoor positioning system using BLE positioning. And, we adopted smartphone for business use as sensing device, developed a smartphone application runs on android OS. Moreover, we conducted the field test of developed system at Itoki Corporation's ITOKI Tokyo Innovation Center, SYNQA, office (Tokyo, Japan). Over 40 workers participated in this field test, and worker tracking log data were collected for 6 weeks. We analyzed the characteristics of the workers' behavior using this log data as a prototyping.

Analysis of the international environment for the national nuclear technology development in the post-coldwar era

International Nuclear Information System (INIS)

Yang, Maeng Ho; Kim, Hwa Sup; Kim, Ji Whan; Lee, Dong Jin; Kim, Jong Sook; Kim, Hyun Joon; Yoon, Young Woo; Ham, Chul Hoon; Cho, Suck Hong

1992-12-01

The main objective of this study is to suggest future policy directions of national nuclear technology development and to define the role of nuclear power in the post-coldwar era. This study first reviews how the collapse of USSR have exerted subsequent effects on the international nuclear industry and analyses the efforts of the multinational nuclear enterprises to obtain technological, competitiveness and to expand the share in the international nuclear market in order to compete the economical and technological superiority. Finally, this study analyses scenarios for the global environmental regulations which may be imposed over internationally in the near future. This study suggests; firstly, increasing investment on science and technology, secondly, diversifying international cooperation, thirdly, rearranging and strengthening a national system for information collecting and analysis, fourthly, making up infrastructure to expand the role of nuclear power, fifthly, expanding the applications of nuclear energy including district heating, etc. (Author)

Technology-related medication errors in a tertiary hospital: a 5-year analysis of reported medication incidents.

Science.gov (United States)

Samaranayake, N R; Cheung, S T D; Chui, W C M; Cheung, B M Y

2012-12-01

Healthcare technology is meant to reduce medication errors. The objective of this study was to assess unintended errors related to technologies in the medication use process. Medication incidents reported from 2006 to 2010 in a main tertiary care hospital were analysed by a pharmacist and technology-related errors were identified. Technology-related errors were further classified as socio-technical errors and device errors. This analysis was conducted using data from medication incident reports which may represent only a small proportion of medication errors that actually takes place in a hospital. Hence, interpretation of results must be tentative. 1538 medication incidents were reported. 17.1% of all incidents were technology-related, of which only 1.9% were device errors, whereas most were socio-technical errors (98.1%). Of these, 61.2% were linked to computerised prescription order entry, 23.2% to bar-coded patient identification labels, 7.2% to infusion pumps, 6.8% to computer-aided dispensing label generation and 1.5% to other technologies. The immediate causes for technology-related errors included, poor interface between user and computer (68.1%), improper procedures or rule violations (22.1%), poor interface between user and infusion pump (4.9%), technical defects (1.9%) and others (3.0%). In 11.4% of the technology-related incidents, the error was detected after the drug had been administered. A considerable proportion of all incidents were technology-related. Most errors were due to socio-technical issues. Unintended and unanticipated errors may happen when using technologies. Therefore, when using technologies, system improvement, awareness, training and monitoring are needed to minimise medication errors. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Usability and use reference in the social network facebook: a netnographic analysis of technological users

Directory of Open Access Journals (Sweden)

Naiara Silva Ferreira

2015-10-01

Full Text Available This article presents a study about the preference of use in virtual social networks, using Facebook as object of study, to identify the motivational factors for the usability of this technology platform. The social network Facebook has been chosen to present a technological scenario of high sociability and virtual interaction. The methodology used was the netnography, being made through the collection of discussions in North American sites of news and forums online, where there is a large critical user participation on the internet, about the gains and frustrations in this context. The content analysis was performed comparing the categories of users found in the literature about values that motivate consumer technology, describing the hedonic, social, utilitarian values and perceptions of risk in consumption when related to lack of privacy. The results show two main groups of users of this technology and 7 subgroups. Therefore, the contribution of the study is that the formation of these groups may reflect technological usability of user groups around the world. The study also brings to the discussion issues related to the behaviors of the users of virtual networks which can be useful for businesses and their relationships with consumers and also the development of new knowledge from such criticism and demands that digital consumers expose about the technologies.

Transmutation technology development; thermal hydraulic power analysis and structure analysis of the HYPER target beam window

Energy Technology Data Exchange (ETDEWEB)

Choi, J. H.; Ju, E. S.; Song, M. K.; Jeon, Y. Z. [Gyeongsang National University, Jinju (Korea)

2002-03-01

A thermal hydraulic power analysis, a structure analysis and optimization computation for some design factor for the design of spallation target suitable for HYPER with 1000 MW thermal power in this study was performed. Heat generation formula was used which was evaluated recently based on the LAHET code, mainly to find the maximum beam current under given computation conditions. Thermal hydraulic power of HYPER target system was calculated using FLUENT code, structure conducted by inputting the data into ANSYS. On the temp of beam windows and the pressure distribution calculated using FLUENT. Data transformation program was composed apply the data calculated using FLUENT being commercial CFD code and ANSYS being FEM code for CFX structure analysis. A basic study was conducted on various singular target to obtain fundamental data on the shape for optimum target design. A thermal hydraulic power analysis and structure analysis were conducted on the shapes of parabolic, uniform, scanning beams to choose the optimum shape of beam current analysis was done according to some turbulent model to simulate the real flow. To evaluate the reliability of numerical analysis result, benchmarking of FLUENT code reformed at SNU and Korea Advanced Institute of Science and Technology and it was compared to CFX in the possession of Korea Atomic Energy Research Institute and evaluated. Reliable deviation was observed in the results calculated using FLUENT code, but temperature deviation of about 200 .deg. C was observed in the result from CFX analysis at optimum design condition. Several benchmarking were performed on the basis of numerical analysis concerning conventional HYPER. It was possible to allow a beam arrests of 17.3 mA in the case of the {phi} 350 mm parabolic beam suggested to the optimum in nuclear transmutation when stress equivalent to VON-MISES was calculated to be 140 MPa. 29 refs., 109 figs. (Author)

FACTORS INFLUENCING INFORMATION TECHNOLOGY ADPOTION: A CROSS-SECTIONAL ANALYSIS

OpenAIRE

Stroade, Jeri L.; Schurle, Bryan W.

2003-01-01

This project will explore information technology adoption issues. The unique characteristics of information technology will be discussed. Advantages and disadvantages to adoption will also be identified. Finally, a statistical model of Internet adoption will be developed to estimate the impacts of certain variables on the underlying process of information technology adoption.

Monitoring Technology Meets Care Work

DEFF Research Database (Denmark)

Kanstrup, Anne Marie; Bygholm, Ann

2015-01-01

's ability to meet the complexity of care work. Understanding intersectional challenges between these care technologies and care work is fundamental to improve design and use of health informatics. In this paper we present an analysis of interaction challenges between a wet-sensor at the task of monitoring......Monitoring technology, especially sensor-based technology, is increasingly taken into use in care work. Despite the simplicity of these technologies – aimed to automate what appear as mundane monitoring tasks – recent research has identified major challenges primarily related to the technology...... wet beds at a nursing home. The analysis identifies the multifaceted nature of monitoring work and the intricacy of integrating sensor technology into the complex knowledge system of monitoring work....

Trace elements in high purity materials for advanced technology: contribution of neutron activation analysis and radioanalytical technique

International Nuclear Information System (INIS)

Gallorini, M.; Pietra, R.; Sabbioni, E.

1991-01-01

Neutron activation analysis and radioanalytical techniques have been employed to investigate problems related to trace elements and high purity technology materials. Applications of these techniques are overviewed: semiconductor technology as in the case of As and In ion implantation in high purity silicon; problems related to trace elements impurities in thermometric measurements; coating materials to prevent trace elements contamination in biological sampling and metals release from human prostheses. (author) 8 refs.; 2 figs.; 8 tabs

Does internationalisation of technology determine technological diversification in large firms?

OpenAIRE

Christian Le Bas; Pari Patel

2005-01-01

The purpose of the paper is to examine the relationship between technological diversification and internationalisation of technology for large multinational firms, operating at the world technological frontier. More precisely we address the question as to whether internationalisation determines diversification. The analysis is based on a rich database of the European patenting activity of 345 large multinational firms with the highest levels of patenting over two periods of time (1988-1990 an...

Analysis of Laser Sintering Technology

Directory of Open Access Journals (Sweden)

Vladislav Markovič

2014-02-01

Full Text Available The new, high-tech development and customization is one ofthe most important factors in promoting the country‘s economicgrowth indicators. The economic downturn in the industryrequires technology and equipment using a minimumof raw materials and providing maximum performance. Thisstatement perfectly describes the innovative, forward-looking,cost-effective laser powder sintering (SLS technology. Here,thanks to the latest engineering achievements, product surfacesare modified and improved, they gain new characteristics. SLSis viable in automobile, engineering, construction, aerospace,aircraft, printing, medical and other areas.In order to create a product which meets the standards andtechnical documentation it is necessary to use and ensure highquality of raw materials, high-end equipment, qualified personnel,the working environment with proper climatic conditions, ergonomics,etc. But all of these, the quality of the product becomesthe decisive indicators meaningless if know how to properly selectthe laser processing operation. Scanning speed, beam power,pulse frequency, protective gases, powder layer thickness – allof them are the physical and mechanical characteristics of thechange in a small range changes the quality of the product of thefuture, the field of application and performance characteristics.

76 FR 70722 - Healthcare Technology Holdings, Inc.; Analysis of Proposed Agreement Containing Consent Orders To...

Science.gov (United States)

2011-11-15

... FEDERAL TRADE COMMISSION [File No. 111 0097] Healthcare Technology Holdings, Inc.; Analysis of Proposed Agreement Containing Consent Orders To Aid Public Comment Correction In notice document 2011-28497 appearing on pages 68189-68191 in the issue of Thursday, November 3, 2011, make the following corrections: 1...

An analysis of cost effective incentives for initial commercial deployment of advanced clean coal technologies

Energy Technology Data Exchange (ETDEWEB)

Spencer, D.F. [SIMTECHE, Half Moon Bay, CA (United States)

1997-12-31

This analysis evaluates the incentives necessary to introduce commercial scale Advanced Clean Coal Technologies, specifically Integrated Coal Gasification Combined Cycle (ICGCC) and Pressurized Fluidized Bed Combustion (PFBC) powerplants. The incentives required to support the initial introduction of these systems are based on competitive busbar electricity costs with natural gas fired combined cycle powerplants, in baseload service. A federal government price guarantee program for up to 10 Advanced Clean Coal Technology powerplants, 5 each ICGCC and PFBC systems is recommended in order to establish the commercial viability of these systems by 2010. By utilizing a decreasing incentives approach as the technologies mature (plants 1--5 of each type), and considering the additional federal government benefits of these plants versus natural gas fired combined cycle powerplants, federal government net financial exposure is minimized. Annual net incentive outlays of approximately 150 million annually over a 20 year period could be necessary. Based on increased demand for Advanced Clean Coal Technologies beyond 2010, the federal government would be revenue neutral within 10 years of the incentives program completion.

Inertial Sensor Technology for Elite Swimming Performance Analysis: A Systematic Review

Science.gov (United States)

Mooney, Robert; Corley, Gavin; Godfrey, Alan; Quinlan, Leo R; ÓLaighin, Gearóid

2015-01-01

Technical evaluation of swimming performance is an essential factor of elite athletic preparation. Novel methods of analysis, incorporating body worn inertial sensors (i.e., Microelectromechanical systems, or MEMS, accelerometers and gyroscopes), have received much attention recently from both research and commercial communities as an alternative to video-based approaches. This technology may allow for improved analysis of stroke mechanics, race performance and energy expenditure, as well as real-time feedback to the coach, potentially enabling more efficient, competitive and quantitative coaching. The aim of this paper is to provide a systematic review of the literature related to the use of inertial sensors for the technical analysis of swimming performance. This paper focuses on providing an evaluation of the accuracy of different feature detection algorithms described in the literature for the analysis of different phases of swimming, specifically starts, turns and free-swimming. The consequences associated with different sensor attachment locations are also considered for both single and multiple sensor configurations. Additional information such as this should help practitioners to select the most appropriate systems and methods for extracting the key performance related parameters that are important to them for analysing their swimmers’ performance and may serve to inform both applied and research practices. PMID:26712760

Marketing technology in macroeconomics.

Science.gov (United States)

Tamegawa, Kenichi

2012-01-01

In this paper, we incorporate a marketing technology into a dynamic stochastic general equilibrium model by assuming a matching friction for consumption. An improvement in matching can be interpreted as an increase in matching technology, which we call marketing technology because of similar properties. Using a simulation analysis, we confirm that a positive matching technology shock can increase output and consumption.

Modeling, analysis and experiments for fusion nuclear technology

International Nuclear Information System (INIS)

Abdou, M.A.; Hadid, A.H.; Raffray, A.R.; Tillack, M.S.; Iizuka, T.

1988-01-01

Selected issues in the development of fusion nuclear technology (FNT) have been studied. These relate to (1) near-term experiments, modeling, and analysis for several key FNT issues, and (2) FNT testing in future fusion facilities. A key concern for solid breeder blankets is to reduce the number of candidate materials and configurations for advanced experiments to emphasize those with the highest potential. Based on technical analysis, recommendations have been developed for reducing the size of the test matrix and for focusing the testing program on important areas of emphasis. The characteristics of an advanced liquid metal MHD experiment have also been studied. This facility is required in addition to existing facilities in order to address critical uncertainties in MHD fluid flow and heat transfer. In addition to experiments, successful development of FNT will require models for interpreting experimental data, for planning experiments, and for use as a design tool for fusion components. Modeling of liquid metal fluid flows is a particular area of need in which substantial progress is expected, and initial efforts are reported here. Preliminary results on the modeling of tritium transport and inventory in solid breeders are also summarized. Finally, the thermo-mechanical behavior of liquid-metal-cooled limiters is analyzed and the parameter space for feasible designs is explored. Because of the renewed strong interest in a fusion engineering facility, a critical review and analysis of the important FNT testing requirements have been performed. Several areas have been emphasized due to their strong impact on the design and cost of the test facility. These include (1) the length of the plasma burn and the mode of operation (pulsed vs. steady-state), and (2) the need for a tritium-producing blanket and its impact on the availability of the device. (orig.)

Manufacturing Technology Information Analysis Center: Knowledge Is Strength

Science.gov (United States)

Safar, Michal

1992-01-01

The Center's primary function is to facilitate technology transfer within DoD, other government agencies and industry. The DoD has recognized the importance of technology transfer, not only to support specific weapon system manufacture, but to strengthen the industrial base that sustains DoD. MTIAC uses an experienced technical staff of engineers and information specialists to acquire, analyze, and disseminate technical information. Besides ManTech project data, MTIAC collects manufacturing technology from other government agencies, commercial publications, proceedings, and various international sources. MTIAC has various means of disseminating this information. Much of the technical data is on user accessible data bases. The Center researches and writes a number of technical reports each year and publishes a newsletter monthly. Customized research is performed in response to specific inquiries from government and industry. MTIAC serves as a link between Government and Industry to strengthen the manufacturing technology base through the dissemination of advanced manufacturing information.

Soulful Technologies

DEFF Research Database (Denmark)

Fausing, Bent

2010-01-01

Samsung introduced in 2008 a mobile phone called "Soul" made with a human touch and including itself a "magic touch". Through the analysis of a Nokia mobile phone TV-commercials I want to examine the function and form of digital technology in everyday images. The mobile phone and its digital camera...... and other devices are depicted by everyday aesthetics as capable of producing a unique human presence and interaction. The medium, the technology is a necessary helper of this very special and lost humanity. Without the technology, no special humanity, no soul - such is the prophecy. This personification...... or anthropomorphism is important for the branding of new technology. Technology is seen as creating a techno-transcendence towards a more qualified humanity which is in contact with fundamental human values like intuition, vision, and sensing; all the qualities that technology, industrialization, and rationalization...

Estimating GHG emissions of marine ports-the case of Barcelona

International Nuclear Information System (INIS)

Villalba, Gara; Gemechu, Eskinder Demisse

2011-01-01

In recent years, GHG inventories of cities have expanded to include extra-boundary activities that form part of the city's urban metabolism and economy. This paper centers on estimating the emissions due to seaports, in such a way that they can be included as part of the city's inventory or be used by the port itself to monitor their policy and technology improvements for mitigating climate change. We propose the indicators GHG emissions per ton of cargo handled or per passenger and emissions per value of cargo handled as practical measures for policy making and emission prevention measures to be monitored over time. Adapting existing methodologies to the Port of Barcelona, we calculated a total of 331,390 tons of GHG emissions (CO 2 equivalents) for the year of 2008, half of which were attributed to vessel movement (sea-based emissions) and the other half to port, land related activities (land-based emissions). The highest polluters were auto carriers with 6 kg of GHG emissions per ton of cargo handled. Knowing the highest emitters, the port can take action to improve the ship's activities within the port limits, such as maneuvering and hotelling. With these results, the port and the city can also find ways to reduce the land-based emissions. - Research highlights: → Adapting existing methodologies to the Port of Barcelona (PoB), we calculated a total of 331,390 tons of GHG emissions for the year of 2008, half of which were attributed to vessel movement (sea-based emissions) and the other half to port, land related activities (land-based emissions) → Emissions per ton of cargo handled is proposed as an indicator to pin point high polluting vessels-a measure independent of the city the port belongs to. For 2008, the highest polluters were auto carriers with 6 kg of GHG emissions per ton of cargo handled. → An additional measure of emissions per value of cargo handled is proposed to complement the emissions per weight indicator. For 2008, the volume of cargo

Fiscal 1998 R and D project on global environmental industrial technology. Research result report on DNA analysis and information processing technology for photosynthesis microorganisms (Development of CO{sub 2} fixation and effective use technology by using bacteria and algae); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kogosei biseibutsu nado DNA kaiseki joho shori gijutsu no kenkyu (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This report summarizes the fiscal 1998 research result on DNA analysis and information processing technology for photosynthesis microorganisms. On the study on DNA analysis technology by triple-strand formation method, as the comparison study result of a READ method, stable triple- strand formation method and hairpin method, a READ method showed the highest triple-strand formation efficiency for target DNA. On the study on accurate separation technology of specific genes, establishment of protocols was promoted for solid-phase probe technology, subtract technology and leveling technology. On the study on DNA microarray analysis technology by high-efficiency hybridization method, the analysis technology of genes by hybridization method using DNA chips is under investigation. In addition, the high- efficiency analysis technology of specific DNA segments by using an affinity sensor, and the high-accuracy cloning technology for DNA with altered primary structure were also studied. (NEDO)

Fiscal 2000 pioneering research on the research on high-sensitivity passive measurement/analysis technologies; 2000 nendo kokando passive keisoku bunseki gijutsu no chosa sendo kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The above-named research was brought over from the preceding fiscal year. Needs for passive measurement were investigated, and it was found that what are named below were interested in passive measurement. Wanting passive measurement technology were the analysis of organic matters on semiconductor wafers, analysis of dangerous substances in wastes, measurement of substances in the life space causing allergy to chemical substances, measurement of constituents of gas emitted by organisms for example through expiration, measurement for automatic sorting of plastic wastes, 2-dimensional spectrometry for medical treatment of organisms, and so forth. In the survey of seeds, various novel technologies were investigated in the fields of optical systems, sensors, and signal processing. The outcomes of the survey indicated that high-sensitivity measurement and analysis of spectral images, measurement and analysis of trace quantities in he fields of medical treatment, environmental matters, and semiconductors would be feasible by the use of newly developed technologies involving the interference array type 2-dimensional modulation/demodulation device, 2-dimensional high-sensitivity infrared sensor, high-sensitivity systematization technology, mixed signal separation technology capable of suppressing noise and background light, and technology for increasing processing speeds. (NEDO)

Application of failure mode and effect analysis in an assisted reproduction technology laboratory.

Science.gov (United States)

Intra, Giulia; Alteri, Alessandra; Corti, Laura; Rabellotti, Elisa; Papaleo, Enrico; Restelli, Liliana; Biondo, Stefania; Garancini, Maria Paola; Candiani, Massimo; Viganò, Paola

2016-08-01

Assisted reproduction technology laboratories have a very high degree of complexity. Mismatches of gametes or embryos can occur, with catastrophic consequences for patients. To minimize the risk of error, a multi-institutional working group applied failure mode and effects analysis (FMEA) to each critical activity/step as a method of risk assessment. This analysis led to the identification of the potential failure modes, together with their causes and effects, using the risk priority number (RPN) scoring system. In total, 11 individual steps and 68 different potential failure modes were identified. The highest ranked failure modes, with an RPN score of 25, encompassed 17 failures and pertained to "patient mismatch" and "biological sample mismatch". The maximum reduction in risk, with RPN reduced from 25 to 5, was mostly related to the introduction of witnessing. The critical failure modes in sample processing were improved by 50% in the RPN by focusing on staff training. Three indicators of FMEA success, based on technical skill, competence and traceability, have been evaluated after FMEA implementation. Witnessing by a second human operator should be introduced in the laboratory to avoid sample mix-ups. These findings confirm that FMEA can effectively reduce errors in assisted reproduction technology laboratories. Copyright © 2016 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Development of Realistic Safety Analysis Technology for CANDU Reactors

International Nuclear Information System (INIS)

Park, Joo Hwan; Rhee, B. W.; Rho, G. H.

2010-04-01

The following 3 research items have been studied to develop and establish the realistic safety analysis and the associated technologies for a CANDU reactor. At the first, WIMS-CANDU which is physics cell code for a CANDU has been improved and validated against the physics criticality experiment data transferred through the international cooperation programs. Also an improved physics model to take into account the pressure tube creep was developed and utilized to assess the effects of the pressure tube creep of 0%, 2.5% and 5% diametral increase of pressure tube on core physics parameters. Secondly, the interfacing module between physics and thermal-hydraulics codes has been developed to provide the enhancement of reliability and convenience of the calculation results of the physics parameters such as power coefficient which was calculated by independent code systems. Finally, the important parameters related to the complex heat transfer mechanisms in the crept pressure tubes were identified to find how to improve the existing fuel channel models. One of the important parameters such as the oxidation model of Zr-steam reaction was identified, implemented and verified with the experimental data of the high pressure and temperature fuel channel and its model was utilized for CFD analysis of the crept pressure tube effect on the reactor safety. The results were also provided to validate the CATNENA models of the crept pressure tube and the effects of the pressure tube creep on the blowdown and post-blowdown phase during LOCA was assessed. The results of this study can be used to assess the uncertainty analysis of coolant void reactivity and the effects of the creep deformed pressure tubes on physics/TH/safety issues. Also, those results will be used to improve the current design and operational safety analysis codes, and to technically support the related issues to resolve their problems

Environmental science and technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-07-01

The environmental Science and Technology Program was structured based on the continuous growth of environmental activities on areas related to nuclear programs at IPEN. The program comprehends five main areas: Environmental analysis: Chemical technology; Polymer technology nucleus: Chemical and Isotope characterization and Analytical Chemistry for the Nuclear Fuel Cycle samples.

A Content Analysis of Dissertations in the Field of Educational Technology: The Case of Turkey

Science.gov (United States)

Durak, Gurhan; Cankaya, Serkan; Yunkul, Eyup; Misirli, Zeynel Abidin

2018-01-01

The present study aimed at conducting content analysis on dissertations carried out so far in the field of Educational Technology in Turkey. A total of 137 dissertations were examined to determine the key words, academic discipline, research areas, theoretical frameworks, research designs and models, statistical analyses, data collection tools,…

Dealing with uncertainty and pursuing superior technology options in risk management-The inherency risk analysis

International Nuclear Information System (INIS)

Helland, Aasgeir

2009-01-01

Current regulatory systems focus on the state of scientific evidence as the predominant factor for how to handle risks to human health and the environment. However, production and assessment of risk information are costly and time-consuming, and firms have an intrinsic disincentive to produce and distribute information about risks of their products as this could endanger their production opportunities and sales. An emphasis on more or better science may result in insufficient thought and attention going into the exploration of technology alternatives, and that risk management policies miss out on the possible achievement of a more favorable set of consequences. In this article, a method is proposed that combines risk assessment with the search for alternative technological options as a part of the risk management procedure. The method proposed is the inherency risk analysis where the first stage focuses on the original agent subject to investigation, the second stage focuses on identifying technological options whereas the third stage reviews the different alternatives, searching for the most attractive tradeoffs between costs and inherent safety. This is then used as a fundament for deciding which technology option to pursue. This method aims at providing a solution-focused, systematic technology-based approach for addressing and setting priorities for environmental problems. By combining risk assessment with a structured approach to identify superior technology options within a risk management system, the result could very well be a win-win situation for both company and the environment.

[THE TECHNOLOGY "CELL BLOCK" IN CYTOLOGICAL PRACTICE].

Science.gov (United States)

Volchenko, N N; Borisova, O V; Baranova, I B

2015-08-01

The article presents summary information concerning application of "cell block" technology in cytological practice. The possibilities of implementation of various modern techniques (immune cytochemnical analysis. FISH, CISH, polymerase chain reaction) with application of "cell block" method are demonstrated. The original results of study of "cell block" technology made with gelatin, AgarCyto and Shadon Cyoblock set are presented. The diagnostic effectiveness of "cell block" technology and common cytological smear and also immune cytochemical analysis on samples of "cell block" technology and fluid cytology were compared. Actually application of "cell block" technology is necessary for ensuring preservation of cell elements for subsequent immune cytochemical and molecular genetic analysis.

Dupont Analysis of An Information Technology Enabled Competitive Advantage

OpenAIRE

Nustini, Yuni

2009-01-01

The transformation of business caused by e-business and e-commerce applications of the internet and related technologies demonstrates that information systems and information technologies are essential ingredients for business survival and success. The most often cited benefit of IT are integrating business process, increasing efficiency, sales, productivity, and competitiveness. This study is designed for determining where managers considering investment in information technology (IT) projec...

Dupont Analysis of an Information Technology Enabled Competitive Advantage

OpenAIRE

Nustini, Yuni

2003-01-01

The transformation of business caused by e-business and e-commerce applications of the internet and related technologies demonstrates that information systems and information technologies are essential ingredients for business survival and success. The most often cited benefit of IT are integrating business process, increasing efficiency, sales, productivity, and competitiveness. This study is designed for determining where managers considering investment in information technology (IT) projec...

Multivariate Statistical Analysis Software Technologies for Astrophysical Research Involving Large Data Bases

Science.gov (United States)

Djorgovski, S. G.

1994-01-01

We developed a package to process and analyze the data from the digital version of the Second Palomar Sky Survey. This system, called SKICAT, incorporates the latest in machine learning and expert systems software technology, in order to classify the detected objects objectively and uniformly, and facilitate handling of the enormous data sets from digital sky surveys and other sources. The system provides a powerful, integrated environment for the manipulation and scientific investigation of catalogs from virtually any source. It serves three principal functions: image catalog construction, catalog management, and catalog analysis. Through use of the GID3* Decision Tree artificial induction software, SKICAT automates the process of classifying objects within CCD and digitized plate images. To exploit these catalogs, the system also provides tools to merge them into a large, complex database which may be easily queried and modified when new data or better methods of calibrating or classifying become available. The most innovative feature of SKICAT is the facility it provides to experiment with and apply the latest in machine learning technology to the tasks of catalog construction and analysis. SKICAT provides a unique environment for implementing these tools for any number of future scientific purposes. Initial scientific verification and performance tests have been made using galaxy counts and measurements of galaxy clustering from small subsets of the survey data, and a search for very high redshift quasars. All of the tests were successful and produced new and interesting scientific results. Attachments to this report give detailed accounts of the technical aspects of the SKICAT system, and of some of the scientific results achieved to date. We also developed a user-friendly package for multivariate statistical analysis of small and moderate-size data sets, called STATPROG. The package was tested extensively on a number of real scientific applications and has

Multivariate statistical analysis software technologies for astrophysical research involving large data bases

Science.gov (United States)

Djorgovski, S. George

1994-01-01

We developed a package to process and analyze the data from the digital version of the Second Palomar Sky Survey. This system, called SKICAT, incorporates the latest in machine learning and expert systems software technology, in order to classify the detected objects objectively and uniformly, and facilitate handling of the enormous data sets from digital sky surveys and other sources. The system provides a powerful, integrated environment for the manipulation and scientific investigation of catalogs from virtually any source. It serves three principal functions: image catalog construction, catalog management, and catalog analysis. Through use of the GID3* Decision Tree artificial induction software, SKICAT automates the process of classifying objects within CCD and digitized plate images. To exploit these catalogs, the system also provides tools to merge them into a large, complete database which may be easily queried and modified when new data or better methods of calibrating or classifying become available. The most innovative feature of SKICAT is the facility it provides to experiment with and apply the latest in machine learning technology to the tasks of catalog construction and analysis. SKICAT provides a unique environment for implementing these tools for any number of future scientific purposes. Initial scientific verification and performance tests have been made using galaxy counts and measurements of galaxy clustering from small subsets of the survey data, and a search for very high redshift quasars. All of the tests were successful, and produced new and interesting scientific results. Attachments to this report give detailed accounts of the technical aspects for multivariate statistical analysis of small and moderate-size data sets, called STATPROG. The package was tested extensively on a number of real scientific applications, and has produced real, published results.

On School Educational Technology Leadership

Science.gov (United States)

Davies, Patricia M.

2010-01-01

This analysis of the literatures on school educational technology leadership addresses definitions of school technology leaders and leadership, their role in educational change, and why schools are now changing as a result of 21st century advancements in technology. The literatures disagree over the definition of educational technology leadership.…

An Analysis of Change Mechanisms in Government Budgets on Science and Technology

Science.gov (United States)

Jung, C.

2012-12-01

Recent studies on policy changes have shown that there are limitations of incrementalism and that there no longer exists a general theory that can explain policy change. A number of studies have been conducted to examine policy changes in terms of drastic changes in budgets or policy agenda. According to the Punctuated Equilibrium Theory (PET), policy change is punctuated by long periods of stability, and large, but rare, changes due to shifts in society or the government. Although the reasons for these drastic changes are interpreted mainly from external events, the exact mechanisms of these changes are still not known. In this study, we assume that the punctuated budget changes are a result of not only external events but also the bureaucratic power of government departments. We attempt to identify the regularity of budget change pattern due to these internal characteristics (bureaucratic power). In order to understand budget changes caused by external events, especially for science and technology, the ARIMA-Intervention analysis was implemented. The results showed that the ARIMA-Intervention analysis explained the abrupt change in budget well. This means that a change in budget cannot be explained as incrementalism. Also, we analyzed the budget change kurtosis of government department along with various policy and organization types. Normally, a high kurtosis means there is a high probability of a punctuated equilibrium. The results show that science and technology agency as well as productive, delivery, and transfer agencies have a relatively high kurtosis.;

Analysis of accelerants and fire debris using aroma detection technology

Energy Technology Data Exchange (ETDEWEB)

Barshick, S.A.

1997-01-17

The purpose of this work was to investigate the utility of electronic aroma detection technologies for the detection and identification of accelerant residues in suspected arson debris. Through the analysis of known accelerant residues, a trained neural network was developed for classifying suspected arson samples. Three unknown fire debris samples were classified using this neural network. The item corresponding to diesel fuel was correctly identified every time. For the other two items, wide variations in sample concentration and excessive water content, producing high sample humidities, were shown to influence the sensor response. Sorbent sampling prior to aroma detection was demonstrated to reduce these problems and to allow proper neural network classification of the remaining items corresponding to kerosene and gasoline.

Development and analysis of educational technologies for a blended organic chemistry course

Science.gov (United States)

Evans, Michael James

Blended courses incorporate elements of both face-to-face and online instruction. The extent to which blended courses are conducted online, and the proper role of the online components of blended courses, have been debated and may vary. What can be said in general, however, is that online tools for blended courses are typically culled together from a variety of sources, are often very large scale, and may present distractions for students that decrease their utility as teaching tools. Furthermore, large-scale educational technologies may not be amenable to rigorous, detailed study, limiting evaluation of their effectiveness. Small-scale educational technologies run from the instructor's own server have the potential to mitigate many of these issues. Such tools give the instructor or researcher direct access to all available data, facilitating detailed analysis of student use. Code modification is simple and rapid if errors arise, since code is stored where the instructor can easily access it. Finally, the design of a small-scale tool can target a very specific application. With these ideas in mind, this work describes several projects aimed at exploring the use of small-scale, web-based software in a blended organic chemistry course. A number of activities were developed and evaluated using the Student Assessment of Learning Gains survey, and data from the activities were analyzed using quantitative methods of statistics and social network analysis methods. Findings from this work suggest that small-scale educational technologies provide significant learning benefits for students of organic chemistry---with the important caveat that instructors must offer appropriate levels of technical and pedagogical support for students. Most notably, students reported significant learning gains from activities that included collaborative learning supported by novel online tools. For the particular context of organic chemistry, which has a unique semantic language (Lewis

Analysis of Language Learning Strategies Used by Students of Traffic Technology

Directory of Open Access Journals (Sweden)

Violeta Jurkovič

2005-06-01

Full Text Available Language learning strategies play a vital role in the language acquisition process, and this includes the realm of ESP at the tertiary level of education. This contribution first defines the concept of language learning strategies and gives a historical background to language learning strategy research. The central section focuses on a comparative analysis of language learning strategies used by first year students of traffic technology at the Faculty of Maritime Studies and Transport in Portorož, University of Ljubljana. The analysis, based on Rebecca Oxford’s “Strategy Inventory for Language Learning”, aims to assess the students’ existing awareness of the process of language acquisition and the learning strategies that they use. Objectives of language teachers should include helping students to raise their awareness of language learning strategies and providing them with contexts for their development. Therefore, the concluding section contains sample ESP teaching materials and student instructions focusing on cognitive language learning strategies.

Concrete Crack Measurement and Analysis Based on Terrestrial Laser Scanning Technology

Directory of Open Access Journals (Sweden)

Xiangyang Xu

2015-03-01

Full Text Available Terrestrial laser scanning (TLS has become one of the potential technologies for an object three-dimensional (3D information acquisition. The using vibration analysis for early detection of cracks has gained popularity over the years and in the last decade substantial progress has been made in that direction. However, the crack detection using TLS is also a good method. In the experimental part of this study, the effect of crack width and location on modal properties of the beam was investigated. The recent paper provides a method for automatic concrete cracks detection from the data that was obtained by TLS. The method of cracks detection is achieved by six steps. The objective of this study is to analyze the crack of concrete beams both experimentally and using MATLAB analysis. Besides this, information about the width, location and percentage of cracks in cracked concrete beams can be obtained using this technique.

Comparative analysis of hydraulic crane-manipulating installations transport and technological machines and industrial robots hydraulic manipulators

Directory of Open Access Journals (Sweden)

Lagerev I.A.

2016-09-01

Full Text Available The article presents results of comparative analysis of hydraulic crane-manipulator installations of mobile transport and technological machines and hydraulic manipulators of industrial robots. The comparative analysis is based on consid-eration of a wide range of types and sizes indicated technical devices of both domestic and foreign production: 1580 structures of cranes and more than 450 structures of industrial robots. It was performed in the following areas: func-tional purpose and basic technical characteristics; a design; the loading conditions of the model and failures in operation process; approaches to the design, calculation methods and mathematical modeling. The conclusions about the degree of similarity and the degree of difference hydraulic crane-manipulator installations of transport and technological ma-chines and hydraulic industrial robot manipulators from the standpoint of their design and modeling occurring in them during operation of dynamic and structural processes.

Reliability analysis for new technology-based transmitters

Energy Technology Data Exchange (ETDEWEB)

Brissaud, Florent, E-mail: florent.brissaud.2007@utt.f [Institut National de l' Environnement Industriel et des Risques (INERIS), Parc Technologique Alata, BP 2, 60550 Verneuil-en-Halatte (France); Universite de Technologie de Troyes (UTT), Institut Charles Delaunay (ICD) and STMR UMR CNRS 6279, 12 rue Marie Curie, BP 2060, 10010 Troyes cedex (France); Barros, Anne; Berenguer, Christophe [Universite de Technologie de Troyes (UTT), Institut Charles Delaunay (ICD) and STMR UMR CNRS 6279, 12 rue Marie Curie, BP 2060, 10010 Troyes cedex (France); Charpentier, Dominique [Institut National de l' Environnement Industriel et des Risques (INERIS), Parc Technologique Alata, BP 2, 60550 Verneuil-en-Halatte (France)

2011-02-15

The reliability analysis of new technology-based transmitters has to deal with specific issues: various interactions between both material elements and functions, undefined behaviours under faulty conditions, several transmitted data, and little reliability feedback. To handle these particularities, a '3-step' model is proposed, based on goal tree-success tree (GTST) approaches to represent both the functional and material aspects, and includes the faults and failures as a third part for supporting reliability analyses. The behavioural aspects are provided by relationship matrices, also denoted master logic diagrams (MLD), with stochastic values which represent direct relationships between system elements. Relationship analyses are then proposed to assess the effect of any fault or failure on any material element or function. Taking these relationships into account, the probabilities of malfunction and failure modes are evaluated according to time. Furthermore, uncertainty analyses tend to show that even if the input data and system behaviour are not well known, these previous results can be obtained in a relatively precise way. An illustration is provided by a case study on an infrared gas transmitter. These properties make the proposed model and corresponding reliability analyses especially suitable for intelligent transmitters (or 'smart sensors').

Design and implementation of the system of importing data of nuclear analysis experiment based on UML technology

International Nuclear Information System (INIS)

Peng Yanguang; Yu Chuansong; Ma Mei; Sun Gongxing

2004-01-01

There are some problems that Excel data importing to database for our scientific data processing, we introduce a method how to use UML and XML technology design and implementation our system. Because XML technology have flexible data exchange mechanism, so it is appropriate to do it, and it is easy for use that the system of importing data of nuclear analysis experiment has a web browser GUI. Our paper emphasis on the software design method and UML design cases. (authors)

Comparative analysis of monetizing technologies for the use of offshore natural gas; Analise comparativa das tecnologias embarcadas de aproveitamento de gas natural

Energy Technology Data Exchange (ETDEWEB)

Biruel Junior, Jose

2008-09-15

The growing world need for natural gas, the issue of offshore oil and associated gas exploration in regions constantly farther from the consumer market, and the law restrictions due to greenhouses gases emissions have stimulated the development of technologies intended to monetizing stranded gas reserves. In order to compare these technologies, a Multi Criteria Decision Analysis Methodology, based on fuzzy parameters, has been developed. The Methodology enables specialists to define analysis dimensions and criteria as well as to assign weight and ratings by means of linguistic variables, resulting in a general performance index for each technology. The Methodology has been applied in a case study to compare the floating technologies FCNG (Floating Compressed Natural Gas), FLNG (Floating Liquefied Natural Gas), FGTL (Floating Gas-to-Liquid) and FGTW (Floating Gas-to- Wire). The efficacy of the Methodology depends on the comprehensiveness and quality of the information provided. Therefore, this dissertation presents a study of these technologies, placing strong emphasis on the Technological Dimension. The Methodology allows for the identification of the drawbacks of each technology so as to especially conduct R and D efforts to improve their competitiveness. (author)

What influences the choice of assessment methods in health technology assessments? Statistical analysis of international health technology assessments from 1989 to 2002.

Science.gov (United States)

Draborg, Eva; Andersen, Christian Kronborg

2006-01-01

Health technology assessment (HTA) has been used as input in decision making worldwide for more than 25 years. However, no uniform definition of HTA or agreement on assessment methods exists, leaving open the question of what influences the choice of assessment methods in HTAs. The objective of this study is to analyze statistically a possible relationship between methods of assessment used in practical HTAs, type of assessed technology, type of assessors, and year of publication. A sample of 433 HTAs published by eleven leading institutions or agencies in nine countries was reviewed and analyzed by multiple logistic regression. The study shows that outsourcing of HTA reports to external partners is associated with a higher likelihood of using assessment methods, such as meta-analysis, surveys, economic evaluations, and randomized controlled trials; and with a lower likelihood of using assessment methods, such as literature reviews and "other methods". The year of publication was statistically related to the inclusion of economic evaluations and shows a decreasing likelihood during the year span. The type of assessed technology was related to economic evaluations with a decreasing likelihood, to surveys, and to "other methods" with a decreasing likelihood when pharmaceuticals were the assessed type of technology. During the period from 1989 to 2002, no major developments in assessment methods used in practical HTAs were shown statistically in a sample of 433 HTAs worldwide. Outsourcing to external assessors has a statistically significant influence on choice of assessment methods.

Aptamer-based technology for food analysis.

Science.gov (United States)

Liu, Xiaofei; Zhang, Xuewu

2015-01-01

Aptamers are short and functional single-stranded oligonucleotide sequences selected from systematic evolution of ligands by exponential enrichment (SELEX) process, which have the capacity to recognize various classes of target molecules with high affinity and specificity. Various analytical aptamers acquired by SELEX are widely used in many research fields, such as medicine, biology, and chemistry. However, the application of this innovative and emerging technology to food safety is just in infant stage. Food safety plays a very important role in our daily lives because varieties of poisonous and harmful substances in food affect human health. Aptamer technique is promising, which can overcome many disadvantages of existing detection methods in food safety, such as long detection time, low sensitivity, difficult, and expensive antibody preparation. This review provides an overview of various aptamer screening technologies and summarizes the recent applications of aptamers in food safety, and future prospects are also discussed.

Narrative text analysis to identify technologies to prevent motor vehicle crashes: examples from military vehicles.

Science.gov (United States)

Pollack, Keshia M; Yee, Nathan; Canham-Chervak, Michelle; Rossen, Lauren; Bachynski, Kathleen E; Baker, Susan P

2013-02-01

The purpose of this research is to describe the leading circumstances of military vehicle crashes to guide prioritization and implementation of crash avoidance and/or warning technologies. A descriptive study using narrative text analysis on 3,944 military vehicle crash narratives. Crash data on drivers, from 2001 to 2006, were assembled from the U.S. Army Combat Readiness/Safety Center. Reviewers collected information on the circumstances of crashes and determined if vehicle technology could have prevented the crash. Nearly 98% of the crashes were nonfatal; 63% occurred in the U.S. and 24% in Iraq. Among crash events where the direction of the impact was recorded, 32% were to the front of the vehicle and 16% involved a vehicle being rear-ended. Rollovers were mentioned in 20% of the narratives. Technology was determined to have the potential to prevent 26% of the crashes, with the forward collision warning system, rear end collision avoidance, emergency brake assistance, and rollover stability control system likely to have the greatest impacts. Some technologies available for civilian vehicles may prevent certain military crash circumstances. The results of this research are significant in light of ongoing global military operations that rely on military vehicles. Improving the preventive technology featured on military vehicles may be an effective strategy to reduce the occurrence of military crashes. Copyright © 2013 Elsevier Ltd. All rights reserved.

Composite science and technology innovation index

International Nuclear Information System (INIS)

2011-02-01

This book reports the composite science and technology innovation index with the purpose, process, conception and, the method of evaluation. It also indicates the result of composite science and technology innovation index in 2010, which itemizes the result according to resource, activity network, environment and outcome. The last part records analysis of science and technology innovation in Korea and development plan with various analysis.

Technology assessment of solar energy utilization

Science.gov (United States)

Jaeger, F.

1985-11-01

The general objectives and methods of Technology Assessment (TA) are outlined. Typical analysis steps of a TA for solar energy are reviewed: description of the technology and its further development; identification of impact areas; analysis of boundary conditions and definition of scenarios; market penetration of solar technologies; projection of consequences in areas of impact; and assessment of impacts and identification of options for action.

Analysis of the impact of heat pump technology on the Irish energy system to the year 2000. Energy case study series: No. 2

Energy Technology Data Exchange (ETDEWEB)

Brady, J.

1977-09-15

An analysis of the impact of existing and new heat pump technology on the Irish energy system to the year 2000 was undertaken. The methodology used involved the measurement of the potential impact against a base Reference Energy System for various heat pump strategies. A short analysis of the implementation rates and their effect on technology impact was also carried out.