Application of CFD methods in research of SCWR thermo-hydraulics

International Nuclear Information System (INIS)

Zeng Xiaokang; Li Yongliang; Yan Xiao; Xiao Zejun; Huang Yanping

2013-01-01

The CFD method has been an important tool in the research of SCWR thermo- hydraulics. Currently, the CFD methods uses commonly the subcritical turbulence models, which can not accurately simulate the gravity and thermal expansion acceleration effect, and CFD numerical method is not applicable when the heat flux is large. The paper summarizes the application status of the CFD methods in the research of SCWR thermo-hydraulics in RETH. (authors)

Comparisons of thermal SCWR assembly designs by in- or inter-assembly moderation

International Nuclear Information System (INIS)

Zhang, P.; Wang, K.

2010-01-01

As one of the six GEN-IV reactor systems and the only one with water as coolant, SCWR is thought to be the most hopeful future nuclear energy system. Many designs have already been proposed worldwide. For thermal SCWR designs, a key consideration factor is how to provide the dedicated moderation, which leads to various designs with water as moderator. It is much like BWR, where under-moderation is an important issue and central water rods are adopted to account for it. Naturally, water rods can be adopted in SCWR assemblies too, but with counter-flow scheme to increase the outlet temperature and thermal efficiency which is unlike the co-flow scheme in BWR. This type can be seen in the American, Japanese and European HPLWR designs. As the other option, moderation could be provided with inter-assembly gap like CANDU-SCWR design. It is worthy of review of these designs for better understanding the water moderating effects and putting forward any new designs. (author)

A SCWR core design with a conceptual fuel assembly using a cruciform moderator

International Nuclear Information System (INIS)

Bae, Kang Mok; Joo, Hyung Kook; Lee, Hyun Chul; Noh, Jae Man; Bae, Yoon Yong

2005-01-01

A super critical water cooled reactor (SCWR) system has a potential to compete with the advanced fossil plant by achieving a high thermal efficiency up to 44% and a plant simplification by eliminating steam generators, steam dryers, steam separators, and recirculation pumps. Due to these advantages, a SCWR is considered as one of the most promising nuclear plants for the Generation-IV (Gen-IV) system. As a first step of a feasibility study a rectangular fuel assembly with a cruciform solid moderator was suggested as a conceptual assembly design at the Korea Atomic Energy Research Institute (KAERI) for the SCWR on a thermal neutron spectrum. In this paper, based on the system parameters proposed by the Gen-IV road map, a preliminary SCWR core design was performed using a conceptual assembly design focused on the power shape control, reactivity coefficients, and cladding temperature limit

Materials challenges for the supercritical water-cooled reactor (SCWR)

International Nuclear Information System (INIS)

Baindur, S.

2008-01-01

This paper discusses the materials requirements of the Supercritical Water-cooled Reactor (SCWR) which arise from its severe expected operating conditions: (i) Outlet Temperature (to 650 C); (ii) Pressure of 25 MPa for the coolant containment, (iii) Thermochemical stress in the presence of supercritical water, and (iv) Radiative damage (up to 150 dpa for the fast spectrum variant). These operating conditions are reviewed; the phenomenology of materials in the supercritical water environment that create the materials challenges is discussed; knowledge gaps are identified, and efforts to understand material behaviour under the operating conditions expected in the SCWR are described. (author)

CFD in supercritical water-cooled nuclear reactor (SCWR) with horizontal tube bundles

International Nuclear Information System (INIS)

Shang, Zhi; Lo, Simon

2009-01-01

The commercial CFD code STAR-CD 4.02 is used as a numerical simulation tool for flows in the supercritical water-cooled nuclear reactor (SCWR). The basic heat transfer element in the reactor core can be considered as round tubes and tube bundles. Reactors with vertical or horizontal flow in the core can be found. In vertically oriented core, symmetric characters of flow and heat transfer can be found and two-dimensional analyses are often performed. However, in horizontally oriented core the flow and heat transfer are fully three-dimensional due to the buoyancy effect. In this paper, horizontal tubes and tube bundles at SCWR conditions are studied. Special STAR-CD subroutines were developed by the authors to correctly represent the dramatic change in physical properties of the supercritical water with temperature. From the study of single round tubes, the Speziale quadratic non-linear high-Re k-ε turbulence model with the two-layer model for near wall treatment is found to produce the best results in comparison with experimental data. In tube bundle simulations, it is found that the temperature is higher in the top half of the bundle and the highest tube wall temperature is located at the outside tubes where the flow rate is the lowest. The secondary flows across the bundle are highly complex. Their main effect is to even out the temperature over the area within each individual recirculating region. Similar analysis could be useful in design and safety studies to obtain optimum fuel rod arrangement in a SCWR. (author)

CFD in supercritical water-cooled nuclear reactor (SCWR) with horizontal tube bundles

Energy Technology Data Exchange (ETDEWEB)

Zhi Shang, E-mail: zhi.shang@stfc.ac.uk [Science and Technology Facilities Council, Daresbury Laboratory, Warrington WA4 4AD (United Kingdom); Lo, Simon, E-mail: simon.lo@uk.cd-adapco.com [CD-adapco, Trident House, Basil Hill Road, Didcot OX11 7HJ (United Kingdom)

2011-11-15

The commercial CFD code STAR-CD 4.02 is used as a numerical simulation tool for flows in the supercritical water-cooled nuclear reactor (SCWR). The basic heat transfer element in the reactor core can be considered as round tubes and tube bundles. Reactors with vertical or horizontal flow in the core can be found. In a vertically oriented core, symmetric characters of flow and heat transfer can be found and two-dimensional analyses are often performed. However, in a horizontally oriented core the flow and heat transfer are fully three-dimensional due to the buoyancy effect. In this paper, horizontal tubes and tube bundles at SCWR conditions are studied. Special STAR-CD subroutines were developed by the authors to correctly represent the dramatic change in physical properties of the supercritical water with temperature. From the study of single round tubes, the Speziale quadratic non-linear high-Re k-{epsilon} turbulence model with the two-layer model for near wall treatment is found to produce the best results in comparison with experimental data. In tube bundle simulations, it is found that the temperature is higher in the top half of the bundle and the highest tube wall temperature is located at the outside tubes where the flow rate is the lowest. The secondary flows across the bundle are highly complex. Their main effect is to even out the temperature over the area within each individual recirculation region. Similar analysis could be useful in design and safety studies to obtain optimum fuel rod arrangement in a SCWR.

Optimization of the fuel assembly for the Canadian Supercritical Water-cooled Reactor (SCWR)

Energy Technology Data Exchange (ETDEWEB)

French, C.; Bonin, H.; Chan, P., E-mail: Corey.French@rmc.ca [Royal Military College of Canada, Dept. of Chemistry and Chemical Engineering, Kingston, Ontario (Canada)

2013-07-01

A parametric optimization of the Canadian Supercritical Water-cooled Reactor (SCWR) lattice geometry and fresh fuel content is performed in this work. With the potential to improve core physics and performance, significant gains to operating and safety margins could be achieved through slight progressions. The fuel performance codes WIMS-AECL and SERPENT are used to calculate performance factors, and use them as inputs to an optimization algorithm. (author)

Clean energy and hydrogen for oil sands development with CANDU SCWR nuclear reactors and Cu-Cl cycles

International Nuclear Information System (INIS)

Wang, Z.L.; Naterer, G.F.; Gabriel, K.S.

2010-01-01

In this paper, the unique capabilities and advantages of SCWR technology for cleaner oil sands development are discussed from two perspectives: lower temperature steam generation by supercritical water for steam assisted gravity drainage (SAGD), and hydrogen production for oil sands upgrading by coupling SCWR with the thermochemical copper-chlorine (Cu-Cl) cycle. The heat requirements for bitumen extraction from the oil sands and the hydrogen requirements for bitumen upgrading are evaluated. A conceptual layout of SCWR coupled with oil sands development is presented. The reduction of CO 2 emissions due to the use of SCWR and thermo chemical hydrogen production cycle is also analyzed. (author)

Fuel to Moderator Ratio Sensitivity Study Using Water Rod Moderator in SCWR Conceptual Core Design

International Nuclear Information System (INIS)

Bae, Seong Man; Kim, Yong Bae; Park, Dong Hwan; Lee, Kwang Ho

2009-01-01

The conceptual operating condition of Super Critical Water-cooled Reactor (SCWR) is above critical point of water, such that the coolant temperature ranges from 280 .deg. C to 510 .deg. C with a pressure of 25MPa. This operating condition makes an SCWR have both merits and demerits when compared with current Light Water Reactors (LWRs). One of the demerits of SCWR is degradation of neutron moderation due to a lower water density from ∼0.1g/cm 3 to ∼0.7g/cm 3 under a high coolant temperature condition. Therefore it is necessary to enhance the moderation capability for SCWR to slow down the fast fission neutrons. Many SCWR designs have a water rod concept as an additional moderator, because water has a good moderation capability. Through reviewing the previous water rod assembly designs, it was identified that a sensitivity study is required to optimize fuel assembly pitch to increase the neutron economy. In this paper, the results of the conceptual assembly design sensitivity study which focuses on the comparison of sensitivity for the fuel pitch to diameter (P/D) ratio using water rod moderator, are presented

Pre-conceptual core design of SCWR with annular fuel rods

Energy Technology Data Exchange (ETDEWEB)

Zhao, Chuanqi [Key Laboratory of Thermo-Fluid Science and Engineering of MOE, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, Shaanxi 710049 (China); School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, Shaanxi 710049 (China); Cao, Liangzhi, E-mail: caolz@mail.xjtu.edu.cn [Key Laboratory of Thermo-Fluid Science and Engineering of MOE, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, Shaanxi 710049 (China); School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, Shaanxi 710049 (China); Wu, Hongchun; Zheng, Youqi [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, Shaanxi 710049 (China)

2014-02-15

Highlights: • Annular fuel with both internal and external cooling is used in supercritical light water reactor (SCWR). • The geometry of the annular fuel has been optimized to achieve better performance for the SCWR. • Based on the annular fuel assembly, an equilibrium core has been designed. • The results show that the equilibrium core has satisfied all the objectives and design criteria. - Abstract: The new design of supercritical light water reactor was proposed using annular fuel assemblies. Annular fuel consists of several concentric rings. Feed water flows through the center and outside of the fuel to give both internal and external cooling. Thanks to this feature, the fuel center temperature and the cladding temperature can be reduced and high power density can be achieved. The water flowing through the center also provides moderation, so there is no need for extra water rods in the assembly. The power distribution can be easily flattened by use of this design. The geometry of the annular fuel has been optimized to achieve better performance for the SCWR. There are 19 fuel pins in an assembly. Burnable poison is utilized to reduce the initial excess reactivity. The fuel reloading pattern and water flow scheme were optimized to achieve more uniform power distribution and lower cladding temperature. An equilibrium core has been designed and analyzed using three dimensional neutronics and thermal-hydraulics coupling calculations. The void reactivity, Doppler coefficient and cold shut down margin were calculated for safety consideration. The present results show that this concept is a promising design for the SCWR.

Study on Material Selection of Reactor Pressure Vessel of SCWR

Science.gov (United States)

Ma, Shuli; Luo, Ying; Yin, Qinwei; Li, Changxiang; Xie, Guofu

This paper first analyzes the feasibility of SA-508 Grade 3 Class 1 Steel as an alternative material for Supercritical Water-Cooled Reactor (SCWR) Reactor Pressure Vessel (RPV). This kind of steel is limited to be applied in SCWR RPV due to its quenching property, though large forging could be accomplished by domestic manufacturers in forging aspect. Therefore, steels with higher strength and better quenching property are needed for SWCR RPV. The chemical component of SA-508 Gr.3 Cl.2 steel is similar to that of SA-508 Gr.3 Cl.1 steel, and more appropriate matching of strength and toughness could be achieved by the adjusting the elements contents, as well as proper control of tempering temperature and time. In light of the fact that Cl.2 steel has been successfully applied to steam generator, it could be an alternative material for SWCR RPV. SA-508 Gr.4N steel with high strength and good toughness is another alternative material for SCWR RPV. But large amount of research work before application is still needed for the lack of data on welding and irradiation etc.

Thermal-hydraulic analyses for in-pile SCWR fuel qualification test loops and SCWR material loop

Energy Technology Data Exchange (ETDEWEB)

Vojacek, A.; Mazzini, G.; Zmitkova, J.; Ruzickova, M. [Research Centre Rez (Czech Republic)

2014-07-01

One of the R&D directions of Research Centre Rez is dedicated to the supercritical water-cooled reactor concept (SCWR). Among the developed experimental facilities and infrastructure in the framework of the SUSEN project (SUStainable ENergy) is construction and experimental operation of the supercritical water loop SCWL focusing on material tests. At the first phase, this SCWL loop is assembled and operated out-of-pile in the dedicated loop facilities hall. At this out-of-pile operation various operational conditions are tested and verified. After that, in the second phase, the SCWL loop will be situated in-pile, in the core of the research reactor LVR-15, operated at CVR. Furthermore, it is planned to carry out a test of a small scale fuel assembly within the SuperCritical Water Reactor Fuel Qualification Test (SCWR-FQT) loop, which is now being designed. This paper presents the results of the thermal-hydraulic analyses of SCWL loop out-of-pile operation using the RELAP5/MOD3.3. The thermal-hydraulic modeling and the performed analyses are focused on the SCWL loop model validation through a comparison of the calculation results with the experimental results obtained at various operation conditions. Further, the present paper focuses on the transient analyses for start-up and shut-down of the FQT loop, particularly to explore the ability of system codes ATHLET 3.0A to simulate the transient between subcritical conditions and supercritical conditions. (author)

Development and application of sub-channel analysis code based on SCWR core

International Nuclear Information System (INIS)

Fu Shengwei; Xu Zhihong; Yang Yanhua

2011-01-01

The sub-channel analysis code SABER was developed for thermal-hydraulic analysis of supercritical water-cooled reactor (SCWR) fuel assembly. The extended computational cell structure, a new boundary conditions, 3 dimensional heat conduction model and water properties package were implemented in SABER code, which could be used to simulate the thermal fuel assembly of SCWR. To evaluate the applicability of the code, a steady state calculation of the fuel assembly was performed. The results indicate good applicability of the SABER code to simulate the counter-current flow and the heat exchange between coolant and moderator channels. (authors)

SCWR Concepts in Japan

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-08-15

Two SCWR concepts are being developed in Japan, one corresponding to the thermal spectrum reactor and the other to the fast spectrum reactor. Yamada et al. described the thermal-spectrum reactor concept referred to as the Japan SCWR (or JSCWR). This concept was developed under the financial support of the Ministry of Economy, Trade and Industry (METI). The basic philosophy of the JSCWR development is to utilize proven light water reactor and supercritical fossil-fired power plant technologies as much as possible to minimize the R&D cost, time and risks. Therefore, the JSCWR is designed as a thermal neutron spectrum reactor using light water as moderator and reactor coolant. The JSCWR plant consists of a pressure-vessel type, once-through reactor and a direct Rankine cycle system. Reactor coolant fed through inlet nozzles is heated up in the core and flows through outlet nozzles with no recirculation in the vessel. Other options to the JSCWR core design are being investigated at the University of Tokyo. The electric output of the JSCWR is assumed to range from 600 MWe to 1700 MWe class to fulfill user’s requirements as much as possible. In this section, the reference value is selected to 1725 MWe, which corresponds to a reactor thermal output of 4039 MWth. Nakatsuka et al. described the core design for the fast-spectrum reactor, which is based on a similar plant system compared to that of the thermal-spectrum reactor. The fast-spectrum reactor, however, would produce higher power rating than the thermal-spectrum one of the same reactor pressure-vessel size. Since the fast-spectrum reactor does not require the moderator, its unit capital cost would be lower than the thermal-spectrum reactor.

Testing requirements for SCWR radiolysis

International Nuclear Information System (INIS)

Guzonas, D.; Stuart, C.; Jay-Gerin, J.-P.; Meesungnoen, J.

2010-01-01

The Generation IV supercritical water-cooled reactor (SCWR) designs under consideration would operate at ∼430-625 o C and 25 MPa, i.e., well beyond the thermodynamic critical point of water. Supercritical (light/heavy) water (SCW)-cooled reactors would enable thermodynamic cycle efficiencies as high as ∼44% (versus ∼33% for existing water reactors), thus generating lower-cost electricity. The purpose of this report is to survey the literature on SCW radiolysis, describe the recent modeling performed at the Universite de Sherbrooke, and to broadly outline the testing required to develop a benchmarked SCW radiolysis model. (author)

Progress reports on SCWR-related development projects from Chinese universities for FY2008-2009

International Nuclear Information System (INIS)

Leung, L.K.H.

2010-02-01

Canada is participating in the international cooperative forum on system research for two designs (supercritical water-cooled reactor, SCWR, and Very High Temperature Reactor, VHTR) of the Gen-IV nuclear reactor. The forum is referred to as the Generation-IV International Forum (or GIF). The Canadian effort focuses mainly on the SCWR. Among various GIF participants, Canada is the leader of this design and has interest mainly on the pressure-tube type reactor, which is a natural extension of the existing CANDU reactor. Several critical research areas (such as material, chemistry, thermalhydraulics, instability, critical flow, etc.) have been identified in the system-research plan for supporting the SCWR design. Collaborative projects have been established between AECL and universities in China to expedite the CANDU SCWR design. These projects focus on research areas beyond the current scope of the AECL and the NSERC/NRCan/AECL collaborative research and development (CRD) project. AECL supports these projects directly and is contributing (in-kind) the results and findings to the Canadian national program. The collaboration between AECL and Chinese universities began in 2007 July. Most projects cover the duration of three years. The Chinese universities submit their annual progress reports each year prior to the project renewal. The objective of this report is to summarize the progress on collaborative projects between AECL and Chinese universities (namely the Tsinghua University, Shanghai Jiaotong University, and Xi'an Jiaotong University) over the duration of 2008 July to 2009 June. (author)

Convergence analysis of neutronic/thermohydraulic coupling behavior of SCWR

International Nuclear Information System (INIS)

Liu, Shichang; Cai, Jiejin

2013-01-01

The neutronic/thermohydraulic coupling (N–T coupling) calculations play an important role in core design and stability analysis. The traditional iterative method is not applicable for some new reactors (such as supercritical water-cooled reactor) which have intense N–T coupling behavior. In this paper, the mathematical model of N–T coupling based on fixed point theory is established firstly, with the convergent criterion, which can show the real-time convergence situation of iteration. Secondly, the self-adaptive relaxation factor and corresponding algorithm are proposed. Thirdly, the convergence analysis of the method of self-adaptive relaxation factor and common relaxation iteration has been performed, based on three calculation examples of SCWR fuel assembly. The results show that the proposed algorithm can efficiently reduce the calculation time and be adapted to different coupling cases and different initial distribution. It is easy to program, providing convenience for reactor design and analysis. This research also provides the theoretical basis for further study of N–T coupling behavior of new reactors such as SCWR

The axial power distribution validation of the SCWR fuel assembly with coupled neutronics-thermal hydraulics method

Energy Technology Data Exchange (ETDEWEB)

Xi, Xi [CNNC Key Laboratory on Nuclear Reactor Thermal Hydraulics Technology, Nuclear Power Institute of China, Chengdu 610041 (China); Xiao, Zejun, E-mail: fabulous_2012@sina.com [CNNC Key Laboratory on Nuclear Reactor Thermal Hydraulics Technology, Nuclear Power Institute of China, Chengdu 610041 (China); Yan, Xiao; Li, Yongliang; Huang, Yanping [CNNC Key Laboratory on Nuclear Reactor Thermal Hydraulics Technology, Nuclear Power Institute of China, Chengdu 610041 (China)

2013-05-15

Highlights: ► CFX and MCNP codes are suitable to calculate the axial power profile of the FA. ► The partition method in the calculation will affect the final result. ► The density feedback has little effect on the axial power profile of CSR1000 FA. -- Abstract: SCWR (super critical water reactor) is one of the IV generation nuclear reactors in the world. In a typical SCWR the water enters the reactor from the cold leg with a temperature of 280 °C and then leaves the core with a temperature of 500 °C. Due to the sharp change in temperature, there is a huge density change of the water along the axial direction of the fuel assembly (FA), which will affect the moderating power of the water. So the axial power distribution of the SCWR FA could be different from the traditional PWR FA.In this paper, it is the first time that the thermal hydraulics code CFX and neutronics code MCNP are used to analyze the axial power distribution of the SCWR FA. First, the factors in the coupled method which could affect the result are analyzed such as the initialization value or the partition method especially in the MCNP code. Then the axial power distribution of the Europe HPLWR FA is obtained by the coupled method with the two codes and the result is compared with that obtained by Waata and Reiss. There is a good agreement among the three kinds of results. At last, this method is used to calculate the axial power distribution of the Chinese SCWR (CSR1000) FA. It is found the axial power profile of the CSR1000 FA is not so sensitive to the change of the moderator density.

Analysing supercritical water reactor's (SCWR's) special safety systems using probabilistic tools

International Nuclear Information System (INIS)

Ituen, I.; Novog, D.R.

2011-01-01

The next generation of reactors, termed Generation IV, has very attractive features -- its superior safety characteristics, high thermal efficiency, and fuel cycle sustainability. A key element of the Generation IV designs is the improvement in safety, which in turn requires improvements in safety system performance and reliability, as well as a reduction in initiating event frequencies. This study compares the response of the systems important to safety in the CANDU-Supercritical Water Reactor to those of the generic CANDU under a main steamline break accident and loss of forced circulation events -- to quantify the improvements in safety for the pre-conceptual CANDU SCWR design. Probabilistic safety analysis is the tool used in this study to test the behavior of the pre- conceptual design during these events. (author)

Linear parameter-varying modeling and control of the steam temperature in a Canadian SCWR

Energy Technology Data Exchange (ETDEWEB)

Sun, Peiwei, E-mail: sunpeiwei@mail.xjtu.edu.cn; Zhang, Jianmin; Su, Guanghui

2017-03-15

Highlights: • Nonlinearity of Canadian SCWR is analyzed based on step responses and Nyquist plots. • LPV model is derived through Jacobian linearization and curve fitting. • An output feedback H{sub ∞} controller is synthesized for the steam temperature. • The control performance is evaluated by step disturbances and wide range operation. • The controller can stabilize the system and reject the reactor power disturbance. - Abstract: The Canadian direct-cycle Supercritical Water-cooled Reactor (SCWR) is a pressure-tube type SCWR under development in Canada. The dynamics of the steam temperature have a high degree of nonlinearity and are highly sensitive to reactor power disturbances. Traditional gain scheduling control cannot theoretically guarantee stability for all operating regions. The control performance can also be deteriorated when the controllers are switched. In this paper, a linear parameter-varying (LPV) strategy is proposed to solve such problems. Jacobian linearization and curve fitting are applied to derive the LPV model, which is verified using a nonlinear dynamic model and determined to be sufficiently accurate for control studies. An output feedback H{sub ∞} controller is synthesized to stabilize the steam temperature system and reject reactor power disturbances. The LPV steam temperature controller is implemented using a nonlinear dynamic model, and step changes in the setpoints and typical load patterns are carried out in the testing process. It is demonstrated through numerical simulation that the LPV controller not only stabilizes the steam temperature under different disturbances but also efficiently rejects reactor power disturbances and suppresses the steam temperature variation at different power levels. The LPV approach is effective in solving control problems of the steam temperature in the Canadian SCWR.

CFD simulation of flow and heat transfer in Canadian SCWR bundles

International Nuclear Information System (INIS)

Podila, K.; Rao, Y.F.

2014-01-01

Within the Generation-IV (Gen-IV) International Forum, Atomic Energy of Canada Limited (AECL) is leading the effort in developing a conceptual design for the Canadian supercritical water-cooled reactor (SCWR). AECL proposed a new fuel bundle design with two rings of fuel elements placed between central flow tube and the pressure tube. In line with the scope of the conceptual design, the objective of the present CFD work is to aid in developing a bundle heat transfer correlation for the Canadian SCWR fuel bundle design. This paper presents results from an ongoing effort in determining the conditions favorable for possible occurrence of heat transfer deterioration (HTD) in the supercritical bundle flows. In the current investigation, a bare-rod bundle geometry was tested for the proposed fuel bundle design at 23.5, 25 and 28 MPa using STAR-CCM+ CFD code. Taking advantage of the design symmetry of the fuel bundle, only 1/32 of the computational domain was simulated. The SST k-ω turbulence model along with y + <1 was used in the simulations. For lower mass flow simulations, the increase of inlet temperature and operational pressure was found effective in reducing the occurrence of HTD. For higher mass flow simulations, normal heat transfer behaviour was observed except for the lower pressure range (23.5MPa). Ultimately, the goal of this study is to aid the development of a criterion for the onset of HTD in the proposed SCWR bundles, which is planned in the next phase of the project. (author)

Development and assessment of a sub-channel code applicable for trans-critical transient of SCWR

International Nuclear Information System (INIS)

Liu, X.J.; Yang, T.; Cheng, X.

2013-01-01

Highlights: • A new sub-channel code COBRA-SC for SCWR is developed. • Pseudo two-phase method is employed to realize trans-critical transient calculation. • Good suitability of COBRA-SC is demonstrated by preliminary assessment. • The calculation results of COBRA-SC agree well with ATHLET code. -- Abstract: In the last few years, extensive R and D activities have been launched covering various aspects of supercritical water-cooled reactor (SCWR), especially the thermal-hydraulic analysis. Sub-channel code plays an indispensable role to predict the detail thermal-hydraulic behavior of the SCWR fuel assembly. This paper develops a new version of sub-channel code COBRA-SC based on the previous COBRA-IV code. The supercritical water property and heat transfer/pressure drop correlations under supercritical pressure are implemented to this code. Moreover, in order to simulate the trans-critical transient (the pressure undergo a decrease from the supercritical pressure to the subcritical pressure), pseudo two-phase method is employed in COBRA-SC code. This work is completed by introduction of a virtual two-phase region near the pseudo-critical line. A smooth transition of void fraction can be realized. In addition, several heat transfer correlations right underneath the critical point are introduced into this code to capture the heat transfer behavior during the trans-critical transient. Some experimental data from simple geometry, e.g. the single tube, small rod bundle, is used to validate and evaluate this new developed COBRA-SC code. The predicted results show a good agreement with the experimental data, demonstrating good feasibility of this code for SCWR condition. A code to code comparison between COBRA-SC and ATHLET for a blowdown transient of a small fuel assembly is also presented and discussed in this paper

Optimization of the fuel assembly for the Canadian SuperCritical Water-cooled Reactor (SCWR)

Energy Technology Data Exchange (ETDEWEB)

French, C., E-mail: Corey.French@cnsc-ccsn.gc.ca [Canadian Nuclear Safety Commission, Ottawa, Ontario (Canada); Bonin, H.; Chan, P.K. [Royal Military College of Ontario, Kingston, Ontario (Canada)

2013-07-01

An approach to develop a parametric optimization tool to support the Canadian Supercritical Water-cooled Reactor (SCWR) fuel design is presented in this work. The 2D benchmark lattices for 78-pin and 64-pin fuel assemblies are used as the initial models from which fuel performance and subsequent optimization stem from. A tandem optimization procedure is integrated which employs the steepest descent method. The physics codes WIMS-AECL, MCNP6 and SERPENT are used to calculate and verify select performance factors. The results are used as inputs to an optimization algorithm that yield optimal fresh fuel isotopic composition and lattice geometry. Preliminary results on verifications of infinite lattice reactivity are demonstrated in this paper. (author)

Proliferation attractiveness of nuclear material in a small modular pressure tube SCWR

Energy Technology Data Exchange (ETDEWEB)

McDonald, M.; Pencer, J., E-mail: mcdonamh@aecl.ca, E-mail: pencerj@aecl.ca [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

2013-07-01

The SuperSafe© Reactor (SSR), has been recently proposed as a small modular version of the Canadian supercritical water cooled reactor (SCWR). This reactor is a heavy water moderated, pressure tube reactor using supercritical light water as coolant. The current SSR design is to generate 300 MWe taking advantage of the expected high thermal efficiency (assumed 45%). As one of the reactor types being considered by the Generation-IV International Forum, it is expected that this SCWR design will feature enhanced proliferation resistance over current generation technologies. Proliferation resistance assessments are wide-ranging, multidisciplinary efforts that are typically performed at a number of levels, from a state level down to a specific facility level. One small, but particularly important, sub-assessment is that of nuclear material attractiveness, that is, assessing the quality of nuclear materials throughout the fuel cycle for use in making a nuclear explosive device. The attractiveness of materials for three different SSR fuel options is examined in this work. (author)

Properties of aqueous systems relevant to the SCWR via molecular dynamics simulations

Energy Technology Data Exchange (ETDEWEB)

Kallikragas, D. [Trent Univ., Dept. of Chemistry, Peterborough, Ontario (Canada); Guzonas, D. [Canadian Nuclear Laboratories, Chalk River, Ontario (Canada); Svishchev, I., E-mail: isvishchev@trentu.ca [Trent Univ., Dept. of Chemistry, Peterborough, Ontario (Canada)

2015-06-15

Supercritical water (SCW) is the intended heat transfer fluid in the proposed GEN-IV supercritical water cooled reactor (SCWR). The oxidative environment poses challenges in choosing appropriate design materials and understanding the behaviour of SCW at the nanoscale within crevices of the passivation layer is needed for developing a control strategy to minimize corrosion. Molecular dynamics simulations have been employed to investigate molecular structure and diffusion of water and chloride in nanometer-spaced iron hydroxide surfaces. Results demonstrate that water is more likely to accumulate on the surface at low-density conditions. The effect of confinement on the water structure diminishes with as little as 20 Å of surface separation. Clustering and the accumulation of water at the surface imply that the SCWR will be most susceptible to pitting corrosion and stress corrosion cracking. A parameterized equation is provided that gives the diffusion coefficients of {sub O2}, H{sub 2}, and OH radical in high temperature and SCW. (author)

Thermal-Hydraulic Analysis of a Supercritical Water Reactor (SCWR) Core

International Nuclear Information System (INIS)

Kucukboyaci, V.N.; Oriani, L.

2004-01-01

The supercritical water reactor (SCWR) has been the object of interest throughout the nuclear Generation IV community because of its high potential: a simple, direct cycle, compact configuration; elimination of many traditional LWR components, operation at coolant temperatures much higher than traditional LWRs and thus high thermal efficiency. It could be said that the SWR was viewed as the water counterpart to the high temperature gas reactor

Corrosion in the SCWR: insights from molecular dynamics simulations of the supercritical water - iron hydroxide interface

Energy Technology Data Exchange (ETDEWEB)

Kallikragas, D.; Plugatyr, A.; Svishchev, I.M., E-mail: dimitrioskallikragas@trentu.ca [Trent University, Peterborough, Ontario (Canada)

2013-07-01

The adsorption properties of supercritical water confined between parallel iron (II) hydroxide surfaces were determined through molecular dynamics simulations. Simulations were conducted at temperatures and water densities typically found in the heat transport system of the supercritical water cooled nuclear reactor (SCWR). Surface water layer densities were compared to those of the bulk water. Adsorption coverage was calculated as a function of the number of waters per surface OH group. Images of the water molecules configurations are provided along with the density profile of the adsorption layer. The observed localized adsorption and surface clustering of supercritical water, would likely produce more localized corrosion phenomena in the water bearing components of the SCWR. (author)

Response matrix method and its application to SCWR single channel stability analysis

International Nuclear Information System (INIS)

Zhao, Jiyun; Tseng, K.J.; Tso, C.P.

2011-01-01

To simulate the reactor system dynamic features during density wave oscillations (DWO), both the non-linear method and the linear method can be used. Although some transient information is lost through model linearization, the high computational efficiency and relatively accurate results make the linear analysis methodology attractive, especially for prediction of the onset of instability. In the linear stability analysis, the system models are simplified through linearization of the complex non-linear differential equations, and then, the linear differential equations are generally solved in the frequency domain through Laplace transformation. In this paper, a system response matrix method was introduced by directly solving the differential equations in the time domain. By using a system response matrix method, the complicated transfer function derivation, which must be done in the frequency domain method, can be avoided. Using the response matrix method, a model was developed and applied to the single channel or parallel channel type instability analyses of the typical proposed SCWR design. The sensitivity of the decay ratio (DR) to the axial mesh size was analyzed and it was found that the DR is not sensitive to mesh size once sufficient number of axial nodes is applied. To demonstrate the effects of the inlet orificing to the stability feature for the supercritical condition, the sensitivity of the stability to inlet orifice coefficient was conducted for hot channel. It is clearly shown that a higher inlet orifice coefficient will make the system more stable. The susceptibility of stability to operating parameters such as mass flow rate, power and system pressure was also performed. And the measure to improve the SCWR stability sensitivity to operating parameters was investigated. It was found that the SCWR stability sensitivity feature can be improved by carefully managing the inlet orifices and choosing proper operating parameters. (author)

ULTRA SCWR+: Practical advanced water reactor concepts

International Nuclear Information System (INIS)

Duffey, Romney; Khartabil, Hussam; Kuran, Sermet; Zhou, Tracy; Pioro, Igor

2008-01-01

Modern thermal power plants now utilize supercritical steam cycles with thermal efficiencies of over 45%. Recent developments have lead to Ultra-SuperCritical (USC) systems, which adopt reheat turbines that can attain efficiencies of over 50%. Because these turbines are already developed, demonstrated and deployed worldwide, and use existing and traditional steam cycle technology, the simplest nuclear advance is to utilize these proven thermal cycle conditions by coupling this turbine type to a reactor. This development direction is fundamentally counter to the usual approach of adopting high-temperature gas-cooled (helium-cooled) reactor cycles, for which turbines have yet to be demonstrated on commercial scale unlike the supercritical steam turbines. The ULTRA (Ultra-supercritical Light water Thermal ReActor) SCWR+ concept adopts the fundamental design approach of matching a water and steam-cooled reactor to the ultra-supercritical steam cycle, adopting the existing and planned thermal power plant turbines. The HP and IP sections are fed with conditions of 25 MPa/625degC and 7 MPa/700degC, respectively, to achieve operating plant thermal efficiencies in excess of 50%, with a direct turbine cycle. By using such low-pressure reheated steam, this concept also adopts technology that was explored and used many years ago in existing water reactors, with the potential to produce large quantities of low cost heat, which can be used for other industrial and district processes. Pressure-Tube (PT) reactors are suitable for adoption of this design approach and, in addition, have other advantages that will significantly improve water-cooled reactor technology. These additional advantages include enhanced safety and improved resource utilization and proliferation resistance. This paper describes the PT-SCWR+ concept and its potential enhancements. (author)

Thermal hydraulic behavior of SCWR sliding pressure startup

International Nuclear Information System (INIS)

Fu Shengwei; Zhou Chong; Xu Zhihong; Yang Yanhua

2011-01-01

The modification to ATHLET-SC code is introduced in this paper, which realizes the simulation of trans-critical transients using two-phase model. With the modified code, the thermal-hydraulic dynamic behavior of the mixed SCWR core during the startup process is simulated. The startup process is similar to the design of SCLWR-H sliding pressure startup. The results show that maximum temperature of cladding-surface does not exceed 650℃ in the whole startup process, and the sudden change of water properties in the trans-critical transients will not cause harmful influence to the heat transfer of the fuel cladding. (authors)

CFD analysis of thermal-hydraulic behavior in SCWR typical flow channels

International Nuclear Information System (INIS)

Gu, H.Y.; Cheng, X.; Yang, Y.H.

2008-01-01

Investigations on thermal-hydraulic behavior in SCWR fuel assembly have obtained a significant attention in the international SCWR community. However, there is still a lack of understanding and ability to predict the heat transfer behavior of supercritical water. In this paper, CFD analysis is carried out to study the flow and heat transfer behavior of supercritical water in sub-channels of both square and triangular rod bundles. Effect of various parameters, e.g. thermal boundary conditions and pitch-to-diameter ratio on the thermal-hydraulic behavior is investigated. Two boundary conditions, i.e., constant heat flux at the outer surface of cladding and constant heat density in the fuel pin are applied. The results show that the structure of the secondary flow mainly depends on the rod bundle configuration as well as the pitch-to-diameter ratio, whereas, the amplitude of the secondary flow is affected by the thermal boundary conditions, as well. The secondary flow is much stronger in a square lattice than that in a triangular lattice. The turbulence behavior is similar in both square and triangular lattices. The dependence of the amplitude of the turbulent velocity fluctuation across the gap on Reynolds number becomes prominent in both lattices as the pitch-to-diameter ratio increases. The effect of thermal boundary conditions on turbulent velocity fluctuation is negligibly small. For both lattices with small pitch-to-diameter ratios (P/D < 1.3), the mixing coefficient is about 0.022. Both secondary flow and turbulent mixing show unusual behavior in the vicinity of the pseudo-critical point. Further investigation is needed. A strong circumferential non-uniformity of wall temperature and heat transfer is observed in tight lattices at constant heat flux boundary conditions, especially in square lattices. In the case with constant heat density of fuel pin, the circumferential conductive heat transfer significantly reduces the non-uniformity of circumferential

Study on high-cycle fatigue behavior of candidate Fe-Cr-Ni alloys for SCWR

International Nuclear Information System (INIS)

Zhao Yuxiang; Liu Guiliang; Tang Rui; Xiong Ru; Qiao Yingjie

2014-01-01

In the design for supercritical water reactor (SCWR), the operating temperature, pressure, burn up and irradiation damage are very high, so it seems vital to make correct choice of structural materials in core and obtain their key application behavior which would beneficial the research and development of SCWR. In this paper, the high cycle fatigue (HCF) tests of commerce austenite alloys including 6XN and 825 were conducted under bending and rotating loads at room temperature (RT) as well as at 550 ℃ in air. The experimental data were analyzed and the S-N curves were processed, the fracture morphology was also observed by SEM. The results indicate that the fatigue limited stresses at RT for the 2 Fe-Cr-Ni alloy were in such order of 825 < 6XN, which consistent with the order of their tensile strength. Elevated temperature would accelerate the oxidation of the specimen and therefore the fatigue life would decrease, among them 6XN was more sensitive to high temperature with the larger decreasing tendency which make the fatigue limited stress of the two alloys more closer at 550 ℃. While 825 is more sensitive to the stress cycles. All the two alloys have good resistance to high cycle fatigue when comparing their experimental data with the calculated value from the empirical formula. The fracture morphology presents areas of crack initiation, crack growth and fracture, the fracture area has much dimples. This work can be applied to the conceptional design for SCWR. (authors)

Evaluation of a thermal SCWR core with sub-channel analysis

International Nuclear Information System (INIS)

Liu Xiaojing; Cheng Xu

2008-01-01

A previous study shows that the two-row fuel assembly has much more favorable neutron-physical and thermal-hydraulic behaviour than the existing one-row fuel assemblies. With this new developed two-row fuel assembly, a thermal SCWR core design is proposed Assessment of this design is carried out in this paper. The performance of this new core design is investigated with 3-D coupled thermal-hydraulic/neutronic calculations. During the coupling procedure, the thermal-hydraulic behaviour is analyzed using a single-channel code and the neutron-physical performance is computed with a 3-D reactor physical code. This paper presents the main results achieved so far related to the distribution of some neutronic and thermal-hydraulic parameters. Since the power distribution in some fuel assemblies is extremely uneven, sub-channel analysis is applied to the hottest and most non-uniform assembly in the core. The sub-channel analysis is performed with the power and thermal hydraulic parameters from the coupling results. It provides the hot channel factor and the maximal cladding surface temperature more precisely. The power and mass flux distribution in these assemblies are illustrated in detail for the demonstration purpose. The difference of the results evaluated with two different methods, i.e. sub-channel analysis and single-channel analysis, shows the importance of applying sub-channel analysis. A sensitivity analysis of some important parameters is also carried out. (author)

An analysis of the sliding pressure start-up of SCWR

International Nuclear Information System (INIS)

Wang, F.; Yang, J.; Li, H.; Zhang, Y.; Zhang, J.; Shan, J.; Gou, J.; Zhang, B.; Chen, C.

2012-01-01

In this paper, the preliminary sliding pressure start-up system and scheme of supercritical water-cooled reactor in CGNPC (CGN-SCWR) were proposed. Thermal-hydraulic behavior in start-up procedures was analyzed in detail by employing advanced reactor subchannel analysis software ATHAS. The maximum cladding temperature (MCT for short) and core power of fuel assembly during the whole start-up process were investigated comparatively. The results show that the recommended start-up scheme meets the design requirements from the perspective of thermal-hydraulic. (authors)

Ab Initio investigation of chloroaqualead (II) complexes as possible corrosion products in Super Critical Water Cooled Reactor (SCWR)

Energy Technology Data Exchange (ETDEWEB)

Anzelj, D.; Pye, C.C., E-mail: diki1979@hotmail.com, E-mail: cory.pye@smu.ca [Saint Mary' s University, Halifax, NS (Canada)

2015-07-01

One of the undesirable processes hindering development of Generation IV SCWR is the possibility of corrosion of construction material. Formation of corrosion products such as metal-ligand complexes is poorly understood both experimentally and computationally. It is essential to predict and control its water chemistry to ensure sustainability of SCWR. Pressurized and heated solutions are challenging for experimental research; computational method becomes an important research tool. A series of ab initio calculations of chloroaqualead (II) complexes have been performed at HF, MP2 and B3LYP levels of theory with CEP-121G, LANL2DZ, SDD basis sets for Pb and 6-31G*, 6-31+G*, 6-311+G* for water. (author)

Ab Initio investigation of chloroaqualead (II) complexes as possible corrosion products in Super Critical Water Cooled Reactor (SCWR)

International Nuclear Information System (INIS)

Anzelj, D.; Pye, C.C.

2015-01-01

One of the undesirable processes hindering development of Generation IV SCWR is the possibility of corrosion of construction material. Formation of corrosion products such as metal-ligand complexes is poorly understood both experimentally and computationally. It is essential to predict and control its water chemistry to ensure sustainability of SCWR. Pressurized and heated solutions are challenging for experimental research; computational method becomes an important research tool. A series of ab initio calculations of chloroaqualead (II) complexes have been performed at HF, MP2 and B3LYP levels of theory with CEP-121G, LANL2DZ, SDD basis sets for Pb and 6-31G*, 6-31+G*, 6-311+G* for water. (author)

Computation of a Canadian SCWR unit cell with deterministic and Monte Carlo codes

International Nuclear Information System (INIS)

Harrisson, G.; Marleau, G.

2012-01-01

The Canadian SCWR has the potential to achieve the goals that the generation IV nuclear reactors must meet. As part of the optimization process for this design concept, lattice cell calculations are routinely performed using deterministic codes. In this study, the first step (self-shielding treatment) of the computation scheme developed with the deterministic code DRAGON for the Canadian SCWR has been validated. Some options available in the module responsible for the resonance self-shielding calculation in DRAGON 3.06 and different microscopic cross section libraries based on the ENDF/B-VII.0 evaluated nuclear data file have been tested and compared to a reference calculation performed with the Monte Carlo code SERPENT under the same conditions. Compared to SERPENT, DRAGON underestimates the infinite multiplication factor in all cases. In general, the original Stammler model with the Livolant-Jeanpierre approximations are the most appropriate self-shielding options to use in this case of study. In addition, the 89 groups WIMS-AECL library for slight enriched uranium and the 172 groups WLUP library for a mixture of plutonium and thorium give the most consistent results with those of SERPENT. (authors)

SCWR Concept in China

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-08-15

To avoid the mechanical and safety problems in both thermal and fast SCWR design, and in the other hand to achieve a high temperature at the reactor exit, a mixed core design with multi-layer fuel assembly has been proposed by the Shanghai Jiao Tong University. The core consists of two zones with different neutron spectra, one with thermal and the other with fast spectrum. In the thermal zone, a co-current downward flow is applied with an exit temperature over the pseudo-critical point. The downward flow in the thermal fuel assembly will provide an effective cooling of the fuel rods. As a result, the cladding temperature will be kept at a low value. In the forthcoming fast zone a high exit temperature is achieved. Due to the high coolant inlet temperature over the pseudo-critical point, the heat transfer deterioration phenomenon will be eliminated in this upward flowing area. The low density in the fast zone can provide a hard neutron spectrum with a wide lattice structure, which can mitigate the non-uniformity of the circumferential heat transfer at the cladding surface and ensure a big inventory of water in the core. Consequently, with a hard neutron spectrum and the multi-layer fuel assembly, a conversion ratio close to 1.0 can be achieved.

Filling the gaps in SCWR materials research: advanced nuclear corrosion research facilities in Hamilton

International Nuclear Information System (INIS)

Krausher, J.L.; Zheng, W.; Li, J.; Guzonas, D.; Botton, G.

2011-01-01

Research efforts on materials selection and development in support of the design of supercritical water-cooled reactors (SCWRs) have produced a considerable amount of data on corrosion, creep and other related properties. Summaries of the data on corrosion [1] and stress corrosion cracking [2] have recently been produced. As research on the SCWR advances, gaps and limitations in the published data are being identified. In terms of corrosion properties, these gaps can be seen in several areas, including: 1) the test environment, 2) the physical and chemical severity of the tests conducted as compared with likely reactor service/operating conditions, and 3) the test methods used. While some of these gaps can be filled readily using existing facilities, others require the availability of advanced test facilities for specific tests and assessments. In this paper, highlights of the new materials research facilities jointly established in Hamilton by CANMET Materials Technology Laboratory and McMaster University are presented. (author)

Development of sub-channel code SACoS and its application in coupled neutronics/thermal hydraulics system for SCWR

International Nuclear Information System (INIS)

Chaudri, Khurrum Saleem; Su Yali; Chen Ronghua; Tian Wenxi; Su Guanghui; Qiu Suizheng

2012-01-01

Highlights: ► A tool is developed for coupled neutronics/thermal-hydraulic analysis for SCWR. ► For thermal hydraulic analysis, a sub-channel code SACoS is developed and verified. ► Coupled analysis agree quite well with the reference calculations. ► Different choice of important parameters makes huge difference in design calculations. - Abstract: Supercritical Water Reactor (SCWR) is one of the promising reactors from the list of fourth generation of nuclear reactors. High thermal efficiency and low cost of electricity make it an attractive option in the era of growing energy demand. An almost seven fold density variation for coolant/moderator along the active height does not allow the use of constant density assumption for design calculations, as used for previous generations of reactors. The advancement in computer technology gives us the superior option of performing coupled analysis. Thermal hydraulics calculations of supercritical water systems present extra challenges as not many computational tools are available to perform that job. This paper introduces a new sub-channel code called Sub-channel Analysis Code of SCWR (SACoS) and its application in coupled analyses of High Performance Light Water Reactor (HPLWR). SACoS can compute the basic thermal hydraulic parameters needed for design studies of a supercritical water reactor. Multiple heat transfer and pressure drop correlations are incorporated in the code according to the flow regime. It has the additional capability of calculating the thermal hydraulic parameters of moderator flowing in water box and between fuel assemblies under co-current or counter current flow conditions. Using MCNP4c and SACoS, a coupled system has been developed for SCWR design analyses. The developed coupled system is verified by performing and comparing HPLWR calculations. The results were found to be in very good agreement. Significant difference between the results was seen when Doppler feedback effect was included in

Delayed hydride cracking and elastic properties of Excel, a candidate CANDU-SCWR pressure tube material

International Nuclear Information System (INIS)

Pan, Z.L.

2010-01-01

Excel, a Zr alloy which contains 3.5%Sn, 0.8%Nb and 0.8%Mo, shows high strength, good corrosion resistance, excellent creep-resistance and dimension stability and thus is selected as a candidate pressure tube material for CANDU-SCWR. In the present work, the delayed hydride cracking properties (K IH and the DHC growth rates), the hydrogen solubility and elastic modulus were measured in the irradiated and unirradiated Excel pressure tube material. (author)

Microscopy investigation on the corrosion of Canadian generation IV SCWR materials

Energy Technology Data Exchange (ETDEWEB)

Li, J. [CanmetMATERIALS, Hamilton, ON (Canada); Huang, X. [Carleton Univ., Ottawa, ON (Canada); Zeng, Y.; Zheng, W. [CanmetMATERIALS, Hamilton, ON (Canada); Woo, O.T.; Guzonas, D. [Atomic Energy Canada Limited, Chalk River, ON (Canada)

2014-07-01

Selection of fuel cladding materials for the Canadian Generation-IV Supercritical Water-cooled Reactor (SCWR) concept faces major challenges due to the severe operating conditions (650 {sup o}C and 25 MPa). High temperature microstructure stability and excellent resistance to general corrosion and stress corrosion cracking are key criteria. While corrosion resistance are generally assessed using weight change measurements and surface oxide examinations by optical and Scanning Electron Microscope (SEM) techniques, for materials exposed to SCW conditions, advanced analytical techniques that involve the use of Focused Ion Beam (FIB) and Transmission Electron Microscopy (TEM) techniques are required. This paper provides examples of such work conducted at CanmetMATERIALS and AECL to provide an in-depth understanding of the corrosion mechanisms of alloys exposed under SCW conditions. (author)

Safety analyses for an in-pile SCWR fuel qualification test loop

Energy Technology Data Exchange (ETDEWEB)

Schulenberg, T.; Raque, M. [Karlsruhe Inst. of Tech., Karlsruhe (Germany)

2014-07-01

As a nuclear facility cooled with supercritical water has never been built nor operated in the past, the planned SCWR fuel qualification test will give the first experience with supercritical water-cooled nuclear systems in general. With a fuel inventory of almost 1 kg of UO{sub 2} with almost 20% enrichment, the supercritical pressure test section inside a low pressure, pool type research reactor needs to be cooled properly even in case of a number of postulated design basis accidents. Depressurization systems and emergency cooling systems will need to be designed with similar reliability as for a prototype reactor to ensure the integrity of barriers retaining the radioactive material. The paper reports about the safety concept and summarizes the safety analyses which have been performed in this context. (author)

Improving Corrosion Behavior in SCWR, LFR and VHTR Reactor Materials by Formation of a Stable Oxide

International Nuclear Information System (INIS)

Motta, Arthur T.; Comstock, Robert; Li, Ning; Allen, Todd; Was, Gary

2009-01-01

The objective of this study is to understand the influence of the alloy microstructure and composition on the formation of a stable, protective oxide in the environments relevant to the SCWR and LFR reactor concepts, as well as to the VHTR. It is proposed to use state-of-the art techniques to study the fine structure of these oxides to identify the structural differences between stable and unstable oxide layers. The techniques to be used are microbeam synchrotron radiation diffraction and fluorescence, and cross-sectional transmission electron microcopy on samples prepared using focused ion beam.

A benchmark comparison of the Canadian Supercritical Water-Cooled Reactor (SCWR) 64-element fuel lattice cell parameters using various computer codes

Energy Technology Data Exchange (ETDEWEB)

Sharpe, J.; Salaun, F.; Hummel, D.; Moghrabi, A., E-mail: sharpejr@mcmaster.ca [McMaster University, Hamilton, ON (Canada); Nowak, M. [McMaster University, Hamilton, ON (Canada); Institut National Polytechnique de Grenoble, Phelma, Grenoble (France); Pencer, J. [McMaster University, Hamilton, ON (Canada); Canadian Nuclear Laboratories, Chalk River, ON, (Canada); Novog, D.; Buijs, A. [McMaster University, Hamilton, ON (Canada)

2015-07-01

Discrepancies in key lattice physics parameters have been observed between various deterministic (e.g. DRAGON and WIMS-AECL) and stochastic (MCNP, KENO) neutron transport codes in modeling previous versions of the Canadian SCWR lattice cell. Further, inconsistencies in these parameters have also been observed when using different nuclear data libraries. In this work, the predictions of k∞, various reactivity coefficients, and relative ring-averaged pin powers have been re-evaluated using these codes and libraries with the most recent 64-element fuel assembly geometry. A benchmark problem has been defined to quantify the dissimilarities between code results for a number of responses along the fuel channel under prescribed hot full power (HFP), hot zero power (HZP) and cold zero power (CZP) conditions and at several fuel burnups (0, 25 and 50 MW·d·kg{sup -1} [HM]). Results from deterministic (TRITON, DRAGON) and stochastic codes (MCNP6, KENO V.a and KENO-VI) are presented. (author)

A benchmark comparison of the Canadian Supercritical Water-Cooled Reactor (SCWR) 64-element fuel lattice cell parameters using various computer codes

International Nuclear Information System (INIS)

Sharpe, J.; Salaun, F.; Hummel, D.; Moghrabi, A.; Nowak, M.; Pencer, J.; Novog, D.; Buijs, A.

2015-01-01

Discrepancies in key lattice physics parameters have been observed between various deterministic (e.g. DRAGON and WIMS-AECL) and stochastic (MCNP, KENO) neutron transport codes in modeling previous versions of the Canadian SCWR lattice cell. Further, inconsistencies in these parameters have also been observed when using different nuclear data libraries. In this work, the predictions of k∞, various reactivity coefficients, and relative ring-averaged pin powers have been re-evaluated using these codes and libraries with the most recent 64-element fuel assembly geometry. A benchmark problem has been defined to quantify the dissimilarities between code results for a number of responses along the fuel channel under prescribed hot full power (HFP), hot zero power (HZP) and cold zero power (CZP) conditions and at several fuel burnups (0, 25 and 50 MW·d·kg"-"1 [HM]). Results from deterministic (TRITON, DRAGON) and stochastic codes (MCNP6, KENO V.a and KENO-VI) are presented. (author)

State of the art on the heat transfer experiments under supercritical pressure condition

International Nuclear Information System (INIS)

Kim, Hwan Yeol; Song, Chul Hwa

2003-07-01

The SCWR(Super-Critical Water cooled Reactor) is one of the six reactor candidates selected in the Gen-IV project which aims at the development of new reactors with enhanced economy and safety. The SCWR is considered to be a feasible concept of new nuclear power plant if the existing technologies developed in fossil fuel fired plant and LWR technologies together with additional research on several disciplines such as materials, water chemistry and safety. As KAERI takes part in the GIF(Generation IV Forum) for the Gen-IV project, domestic concerns about the SCWR have been recently increased. In order to establish a foundation for the development of SCWR, efforts should be concentrated on the conceptual design of systems and the associated key experiments as well. Heat transfer experiments, among others, under supercritical condition are required for the proper prediction of thermal hydraulic phenomena, which are essential for the thermal hydraulic designs of reactor core. Nevertheless, the experiments have not been performed in Korea yet. This report deals with fundamental surveys on the heat transfer experiments under supercritical conditions, which are required for the understanding of heat transfer characteristics for the thermal hydraulic designs of supercritical reactor core. Investigations on the physical properties of water and CO 2 showed that the physical properties such as density, specific heat, viscosity and thermal conductivity are significantly changed near the pseudo-critical points. The state of the art on the heat transfer characteristics in relation with heat transfer deterioration and heat transfer coefficient is briefly described. In addition, previous experiments with supercritical water as well as supercritical CO 2 and Freon used for an alternating fluid are presented

State of the art on the heat transfer experiments under supercritical pressure condition

Energy Technology Data Exchange (ETDEWEB)

Kim, Hwan Yeol; Song, Chul Hwa

2003-07-01

The SCWR(Super-Critical Water cooled Reactor) is one of the six reactor candidates selected in the Gen-IV project which aims at the development of new reactors with enhanced economy and safety. The SCWR is considered to be a feasible concept of new nuclear power plant if the existing technologies developed in fossil fuel fired plant and LWR technologies together with additional research on several disciplines such as materials, water chemistry and safety. As KAERI takes part in the GIF(Generation IV Forum) for the Gen-IV project, domestic concerns about the SCWR have been recently increased. In order to establish a foundation for the development of SCWR, efforts should be concentrated on the conceptual design of systems and the associated key experiments as well. Heat transfer experiments, among others, under supercritical condition are required for the proper prediction of thermal hydraulic phenomena, which are essential for the thermal hydraulic designs of reactor core. Nevertheless, the experiments have not been performed in Korea yet. This report deals with fundamental surveys on the heat transfer experiments under supercritical conditions, which are required for the understanding of heat transfer characteristics for the thermal hydraulic designs of supercritical reactor core. Investigations on the physical properties of water and CO{sub 2} showed that the physical properties such as density, specific heat, viscosity and thermal conductivity are significantly changed near the pseudo-critical points. The state of the art on the heat transfer characteristics in relation with heat transfer deterioration and heat transfer coefficient is briefly described. In addition, previous experiments with supercritical water as well as supercritical CO{sub 2} and Freon used for an alternating fluid are presented.

Coupled 3D neutron kinetics and thermalhydraulic characteristics of the Canadian supercritical water reactor

Energy Technology Data Exchange (ETDEWEB)

Hummel, David William, E-mail: hummeld@mcmaster.ca; Novog, David Raymond

2016-03-15

Highlights: • A coupled spatial kinetics and thermalhydraulics model of the PT-SCWR was created. • Positive power excursions were demonstrated during accident-like transients. • The reactor will inherently self-shutdown in such transients with some delay. • A fast-acting shutdown system would limit the consequences of the power pulse. - Abstract: The Canadian Supercritical Water-cooled Reactor concept, as an evolution of the CANada Deuterium Uranium (CANDU) reactor, includes both pressure tubes and a low temperature heavy water moderator. The current Pressure Tube type SCWR (PT-SCWR) concept features 64-element fuel assemblies placed within High Efficiency Re-entrant Channels (HERCs) that connect to core inlet and outlet plena. Among current SCWR concepts the PT-SCWR is unique in that the HERC separates multiple coolant and moderator regions, giving rise to coupled neutronic-thermalhydraulic feedbacks beyond those present in CANDU or contemporary Light Water Reactors. The objective of this work was thus to model the coupled neutronic-thermal hydraulic properties of the PT-SCWR to establish the impact of these multiple regions on the core's transient behavior. To that end, the features of the PT-SCWR were first modeled with the neutron transport code DRAGON to create a database of homogenized and condensed cross-sections and thermalhydraulic feedback coefficients. These were used as input to a core-level neutron diffusion model created with the code DONJON. The behavior of the primary heat transport system was modeled with the thermalhydraulic system code CATHENA. A procedure was developed to couple the outputs of DONJON and CATHENA, facilitating three-dimensional spatial neutron kinetics and coupled thermalhydraulic analysis of the PT-SCWR core. Several postulated transients were initiated within the coupled model by changing the core inlet and outlet boundary conditions. Decreasing coolant density around the fuel was demonstrated to produce positive

Analysis of pin removal experiments conducted in an SCWR-like test lattice

Energy Technology Data Exchange (ETDEWEB)

Chawla, R. [Paul Scherrer Institue, CH-5232 Villigen PSI (Switzerland); Swiss Federal Inst. of Technology EPFL, CH-1015 Lausanne (Switzerland); Raetz, D. [Paul Scherrer Institue, CH-5232 Villigen PSI (Switzerland); Resun AG, CH-5001 Aarau (Switzerland); Jordan, K. A. [Paul Scherrer Institue, CH-5232 Villigen PSI (Switzerland); Univ. of Florida, Gainesville, FL (United States); Perret, G. [Paul Scherrer Institue, CH-5232 Villigen PSI (Switzerland)

2012-07-01

A comprehensive program of integral experiments, largely based on the measurement of reaction rate distributions, was carried out recently on an SCWR-like fuel lattice in the central test zone of the PROTEUS zero-power research reactor at the Paul Scherrer Inst. in Switzerland. The present paper reports on the analysis of a complementary set of measurements, in which the reactivity effects of removing individual pins from the unperturbed, heterogeneously moderated reference lattice were investigated. It has been found that the detailed Monte Carlo modeling of the whole reactor using MCNPX is able - as in the case of the reaction rate distributions - to reproduce the experimental results for the pin removal worths within the achievable statistical accuracy. A comparison of reduced-geometry calculations between MCNPX and the deterministic LWR assembly code CASMO-4E has revealed certain discrepancies. On the basis of a reactivity decomposition analysis of the differences between the codes, it has been suggested that these could be due to CASMO-4E deficiencies in calculating the effect, upon pin removal, of the extra moderation in the neighboring fuel pins. (authors)

Nuclear data sensitivity and uncertainty for the Canadian supercritical water-cooled reactor II: Full core analysis

International Nuclear Information System (INIS)

Langton, S.E.; Buijs, A.; Pencer, J.

2015-01-01

Highlights: • H-2, Pu-239, and Th-232 make large contributions to SCWR modelling sensitivity. • H-2, Pu-239, and Th-232 make large contributions to SCWR modelling uncertainty. • Isotopes of Zr make large contributions to SCWR modelling uncertainty. - Abstract: Uncertainties in nuclear data are a fundamental source of uncertainty in reactor physics calculations. To determine their contribution to uncertainties in calculated reactor physics parameters, a nuclear data sensitivity and uncertainty study is performed on the Canadian supercritical water reactor (SCWR) concept. The nuclear data uncertainty contributions to the neutron multiplication factor k eff are 6.31 mk for the SCWR at the beginning of cycle (BOC) and 6.99 mk at the end of cycle (EOC). Both of these uncertainties have a statistical uncertainty of 0.02 mk. The nuclear data uncertainty contributions to Coolant Void Reactivity (CVR) are 1.0 mk and 0.9 mk for BOC and EOC, respectively, both with statistical uncertainties of 0.1 mk. The nuclear data uncertainty contributions to other reactivity parameters range from as low as 3% of to as high as ten times the values of the reactivity coefficients. The largest contributors to the uncertainties in the reactor physics parameters are Pu-239, Th-232, H-2, and isotopes of zirconium

Physical Therapy and Manual Physical Therapy: Differences in Patient Characteristics.

NARCIS (Netherlands)

van Ravensberg, C. D. Dorine; Oostendorp, Rob A B; van Berkel, Lonneke M.; Scholten-Peeters, Gwendolijne G M; Pool, Jan J.M.; Swinkels, Raymond A. H. M.; Huijbregts, Peter A.

2005-01-01

This study compared socio-demographic characteristics, health problem characteristics, and primary process data between database samples of patients referred to physical therapy (PT) versus a sample of patients referred to manual physical therapy (MPT) in the Netherlands. Statistical analysis

Physical therapy and manual physical therapy: Differences in patient characteristics

NARCIS (Netherlands)

van Ravensberg, C. D. Dorine; Oostendorp, R.A.B.; van Berkel, Lonneke M.; Scholten-Peeters, G.G.M.; Pool, J.J.M.; Swinkels, Raymond A. H. M.; Huijbregts, Peter A.

2005-01-01

This study compared socio-demographic characteristics, health problem characteristics, and primary process data between database samples of patients referred to physical therapy (PT) versus a sample of patients referred to manual physical therapy (MPT) in the Netherlands. Statistical analysis

Physical Therapy and Manual Physical Therapy: Differences in Patient Characteristics

NARCIS (Netherlands)

van Ravensberg, C. D. Dorine; Oostendorp, Rob A B; van Berkel, Lonneke M.; Scholten-Peeters, Gwendolijne G. M.; Pool, Jan J.M.; Swinkels, Raymond A. H. M.; Huijbregts, Peter A.

2005-01-01

This study compared socio-demographic characteristics, health problem characteristics, and primary process data between database samples of patients referred to physical therapy (PT) versus a sample of patients referred to manual physical therapy (MPT) in the Netherlands. Statistical analysis

Physical characteristics related to bra fit.

Science.gov (United States)

Chen, Chin-Man; LaBat, Karen; Bye, Elizabeth

2010-04-01

Producing well-fitting garments has been a challenge for retailers and manufacturers since mass production began. Poorly fitted bras can cause discomfort or pain and result in lost sales for retailers. Because body contours are important factors affecting bra fit, this study analyses the relationship of physical characteristics to bra-fit problems. This study has used 3-D body-scanning technology to extract upper body angles from a sample of 103 college women; these data were used to categorise physical characteristics into shoulder slope, bust prominence, back curvature and acromion placement. Relationships between these physical categories and bra-fit problems were then analysed. Results show that significant main effects and two-way interactions of the physical categories exist in the fit problems of poor bra support and bra-motion restriction. The findings are valuable in helping the apparel industry create better-fitting bras. STATEMENT OF RELEVANCE: Poorly fitted bras can cause discomfort or pain and result in lost sales for retailers. The findings regarding body-shape classification provide researchers with a statistics method to quantify physical characteristics and the findings regarding the relationship analysis between physical characteristics and bra fit offer bra companies valuable information about bra-fit perceptions attributable to women with figure variations.

Heat Transfer Characteristics for an Upward Flowing Supercritical Pressure CO{sub 2} in a Vertical Circular Tube

Energy Technology Data Exchange (ETDEWEB)

Kang, Deog Ji

2008-02-15

The SCWR(Super Critical Water-cooled Reactor) is one of the feasible options for the 4th generation nuclear power plant, which is being pursued by an international collaborative organization, the Gen IV International Forum(GIF). The major advantages of the SCWR include a high thermal efficiency and a maximum use of the existing technologies. In the SCWR, the coolant(water) of a supercritical pressure passes the pseudo-critical temperature as it flows upward through the sub-channels of the fuel assemblies. At certain conditions a heat transfer deterioration occurs near the pseudo-critical temperature and it may cause an excessive rise of the fuel surface temperature. Therefore, an accurate estimation of the heat transfer coefficient is necessary for the thermal-hydraulic design of the reactor core. A test facility, SPHINX(Supercritical Pressure Heat Transfer Investigation for the Next Generation), dedicated to produce heat transfer data and study flow characteristics, uses supercritical pressure CO{sub 2} as a surrogate medium to take advantage of the relatively low critical temperature and pressure: and similar physical properties with water. The produced data includes the temperature of the heating surface and the heat transfer coefficient at varying mass fluxes, heat fluxes, and operating pressures. The test section is a circular tube of ID 6.32 mm: it is almost the same as the hydraulic diameter of the sub-channel in the conceptional design presented by KAERI. The test range of the mass flux is 285 to 1200 kg/m{sup 2}s and the maximum heat flux is 170 kW/m{sup 2}. The tests were mainly performed for an inlet pressure of 8.12 MPa which is 1.1 times of critical pressure. With the test results of the wall temperature and the heat transfer coefficient, effects of mass flux, heat flux, inlet pressure, and the tube diameter on the heat transfer were studied. And the test results were compared with the existing correlations of the Nusselt number. In addition, New

Physical characteristics comparison of virtual wedge device with physical wedge

International Nuclear Information System (INIS)

Cho, Jung Keun; Choi, Kye Sook; Lim, Cheong Hwan; Kim, Jeong Koo; Jung, Hong Ryang; Lee, Jung Ok; Lee, Man Goo

2001-01-01

We compared the characteristics of Siemens virtual wedge device with physical wedges for clinical application. We investigated the characteristics of virtual and physical wedges for various wedge angles (15, 30, 45, and 60) using 6- and 15- MV photon beams. Wedge factors were measured in water using an ion chamber for various field sizes and depths. In case of virtual wedge device, as upper jaw moves during irradiation, wedge angles were estimated by accumulated doses. These measurements were performed at off-axis points perpendicular to the beam central axis in water for a 15 cm x 20 cm radiation field size at the depth of 10 cm. Surface does without and with virtual or physical wedges were measured using a parallel plate ion chamber at surface. Field size was 15 cm * 20 cm and a polystyrene phantom was used. For various field sizes, virtual and physical wedge factors were changed by maximum 2.1% and 3.9%, respectively. For various depths, virtual and physical wedge factors were changed by maximum 1.9% and 2.9%, respectively. No major difference was found between the virtual and physical wedge angles and the difference was within 0.5. Surface dose with physical wedge was reduced by maximum 20% (x-ray beam : 6 MV, wedge angle : 45, SSD : 80 cm) relative to one with virtual wedge or without wedge. Comparison of the characteristics of Siemens virtual wedge device with physical wedges was performed. Depth dependence of virtual wedge factor was smaller than that of physical wedge factor. Virtual and physical wedge factors were nearly independent of field sizes. The accuracy of virtual and physical wedge angles was excellent. Surface dose was found to be reduced using a physical wedge

Physical characteristics comparison of virtual wedge device with physical wedge

International Nuclear Information System (INIS)

Choi, Dong Rak; Shin, Kyung Hwan; Lee, Kyu Chan; Kim, Dae Yong; Ahn, Yong Chan; Lim, Do Hoon; Kim, Moon Kyung; Huh, Seung Jae

1999-01-01

We have compared the characteristics of Siemens virtual wedge device with physical wedges for clinical application. We investigated the characteristics of virtual and physical wedges for various wedge angles (15, 30, 45, and 60 ) using 6- and 15MV photon beams. Wedge factors were measured in water using an ion chamber for various field sizes and depths. In case of virtual wedge device, as upper jaw moves during irradiation, wedge angles were estimated by accumulated doses. These measurements were performed at off-axis points perpendicular to the beam central axis in water for a 15 cm x 20 cm radiation field size at the depth of 10 cm. Surface doses without and with virtual or physical wedges were measured using a parallel plate ion chamber at surface. Field size was 15 cm x 20 cm and a polystyrene phantom was used. For various field sizes, virtual and physical wedge factors were changed by maximum 2.1% and 3.9%, respectively. For various depths, virtual and physical wedge factors were changed by maximum 1.9% and 2.9%, respectively. No major difference was found between the virtual and physical wedge angles and the difference was within 0.5 .deg. . Surface dose with physical wedge was reduced by maximum 20% (x-ray beam: 6 MV, wedge angle: 45 .deg. , SSD: 80cm) relative to one with virtual wedge or without wedge. Comparison of the characteristics of Siemens virtual wedge device with physical wedges was performed. Depth dependence of virtual wedge factor was smaller than that of physical wedge factor. Virtual and physical wedge factors were nearly independent of field sizes. The accuracy of virtual and physical wedge angles was excellent. Surface dose was found to be reduced using physical wedge

Study on low-cycle fatigue property of candidate stainless steels for SCWR

International Nuclear Information System (INIS)

Chen Le; Tang Rui; Liang Bo; Zhang Qiang; Liu Hong

2013-01-01

Low cyclic fatigue property of three austenitic stainless steels (316Ti, 347 and HR3C) as candidate materials for SCWR was investigated at room temperature (RT) and 650℃ under a strain amplitude of ± 0.5%, and fracture morphology of all the samples was observed by scanning electron microscope (SEM). The results showed that, at both temperatures the fatigue life of 347 was best and 316Ti worst. For each material, the area of hysteresis was nearly the same in the two temperatures. The elastic deformation was 0.1% - 0.15% both at RT and 650℃ for the three materials with different fatigue lives, indicating it had no direct connection with fatigue life. There was different cyclic hardening/saturation behavior for each material. The maximum/minimum stress of either HR3C or 347 was quite different at the two temperatures, while of 316Ti was almost the same. The cyclic hardening behavior was more remarkable in 316Ti compared with 347 at 650℃. SEM observation found that the fatigue striation width was only 1.87 μm for 347, but up to 4.67 μm and 3.0 μm for 316Ti and HR3C respectively, which further demonstrated that 347 had the best fatigue property at 650℃. (authors)

Teachers' and Students' Perceptions of Effective Physics Teacher Characteristics

Science.gov (United States)

Korur, Fikret; Eryilmaz, Ali

2012-01-01

Problem Statement: What do teachers and students in Turkey perceive as the common characteristics of effective physics teachers? Purpose of Study: The first aim was to investigate the common characteristics of effective physics teachers by asking students and teachers about the effects of teacher characteristics on student physics achievement and…

Actual and preferred personality characteristics of physical educators

Directory of Open Access Journals (Sweden)

Saša Cecić Erpič

2002-12-01

Full Text Available The Five-Factor Model of personality, which includes dimensions energy, agreeableness, conscientiousness, emotional stability, and openness, gained a growing acceptance by personality researchers. In the present study the actual personality characteristics of physical educators and the personality profile of an ideal (according to subjective evaluations of experts physical educator were investigated. The aim of the study was to examine differences between profiles of actual and preferred personality characteristics and to present differences in personality characteristics between male and female physical educators of different ages. The study included 76 (40 male, 36 female 24 to 58 year-old physical educators (mean age 39.7 years. 34 experts from the field of sport, physical education, and kinesiology evaluated the preferred personality structure of an ideal physical educator. The Big Five Observer (BFO was used to assess actual and preferred personality structures. These results show that the actual personality profile of physical educators is described with all five moderately high dimensions, which is relatively congruent with the social type from Holland's typology, characteristic of educators. In comparison with participants, an ideal physical educator should have equally expressed agreeableness, while other four dimensions should be highly expressed. Gender differences in energy and agreeableness (women have higher results in both dimensions were found significant. No significant age differences in the personality structure were obtained by a cross-sectional comparison.

An experimental study of commercially available alloys for potential use in the CANDU®-SCWR

Energy Technology Data Exchange (ETDEWEB)

Cook, W.; Miles, J.; Bradley, C. [Univ. of New Brunswick, Dept. of Chemical Engineering, Fredericton, New Brunswick (Canada); Li, J.; Zheng, W. [CANMET-MTL, Hamilton, Ontario (Canada)

2010-07-01

In order to study the corrosion of candidate alloys in conditions simulating those proposed for the CANDU®-SCWR, a dynamic test loop has been constructed in the nuclear laboratories in the Department of Chemical Engineering at UNB. For this review, the following materials were selected for analysis: Inconel 625 (I625), Hastelloy C 276 (HC276) and 304SS. I625 and HC276 are members of a class of 'superalloys' comprised primarily of nickel and chromium, which are suitable for high temperature applications and 304SS is a commonly used construction material in current reactors. Coupons were cut from each material and polished to an 800 grit finish. Experiments were conducted at 400{sup o}C, 500{sup o}C and 550{sup o}C at 25MPa with exposure times of 100, 250, and 500 hours to examine the corrosion rate and oxide formation for each of these materials. Preliminary results indicate minimal weight change for both I625 and HC276, while small weight gains were observed for the 304SS samples. These results are supported with SEM work, which shows minimal oxidation on the I625 and HC276 samples. The 304SS samples also showed minimal oxide growth characterized by localized attack on the coupon surfaces. (author)

Physical aspects of the Canadian generation IV supercritical water-cooled pressure tube reactor plant design

Energy Technology Data Exchange (ETDEWEB)

Gaudet, M.; Yetisir, M.; Haque, Z. [Atomic Energy of Canada Limited, Chalk River, ON (Canada)

2014-07-01

The form of the containment building is a function of the requirements imposed by various systems. In order to provide sufficient driving force for naturally-circulated emergency cooling systems, as well as providing a gravity-driven core flooding pool function, the Canadian SCWR reactor design relies on elevation differences between the reactor and the safety systems. These elevation differences, the required cooling pool volumes and the optimum layout of safety-related piping are major factors influencing the plant design. As a defence-in-depth, the containment building and safety systems also provide successive barriers to the unplanned release of radioactive materials, while providing a path for heat flow to the ultimate heat sink, the atmosphere. Access to the reactor for refuelling is from the top of the reactor, with water used as shielding during the refuelling operations. The accessibility to the reactor and protection of the environment are additional factors influencing the plant design. This paper describes the physical implementation of the major systems of the Canadian SCWR within the reactor building, and the position of major plant services relative to the reactor building. (author)

Quantifying physical characteristics of wildland fuels using the fuel characteristic classification system.

Science.gov (United States)

Cynthia L. Riccardi; Susan J. Prichard; David V. Sandberg; Roger D. Ottmar

2007-01-01

Wildland fuel characteristics are used in many applications of operational fire predictions and to understand fire effects and behaviour. Even so, there is a shortage of information on basic fuel properties and the physical characteristics of wildland fuels. The Fuel Characteristic Classification System (FCCS) builds and catalogues fuelbed descriptions based on...

Schoolyard Characteristics, Physical Activity, and Sedentary Behavior

DEFF Research Database (Denmark)

Van Kann, Dave H H; de Vries, Sanne I; Schipperijn, Jasper

2016-01-01

BACKGROUND: Physical activity (PA) is decreasing among children, while sedentary behavior (SB) is increasing. Schoolyards seem suitable settings to influence children's PA behavior. This study investigated the associations between schoolyard characteristics and moderate-to-vigorous physical activ...

Characteristics of the General Physics student population.

Science.gov (United States)

Hunt, Gary L.

2006-12-01

Are pre-medical students different than the other students in a General physics class? They often appear to be different, based on how often they seek help from the instructor or how nervous they are about 2 points on a lab report. But are these students different in a measurable characteristic? The purpose of this study is to better understand the characteristics of the students in the introductory physics classes. This is the first step toward improving the instruction. By better understanding the students the classroom, the organization and pedagogy can be adjusted to optimize student learning. The characteristics to be investigated during this study are: · student epistemological structure, · student attitudes, · science course preparation prior to this course, · study techniques used, · physics concepts gained during the class · performance in the class. The data will be analyzed to investigate differences between groups. The groups investigated will be major, gender, and traditional/nontraditional students.

Oxidation behavior of austenitic stainless steels as fuel cladding candidate materials for SCWR in superheated steam

International Nuclear Information System (INIS)

Abe, Hiroshi; Hong, Seung Mo; Watanabe, Yutaka

2014-01-01

Highlights: • Effect of cold work on oxidation kinetics was clearly observed for 15Cr–20Ni SS. • The tube-shaped 15Cr–20Ni SS showed very good oxidation resistance. • The machined layer by cold drawing has a significant role to mitigate oxidation. - Abstract: Oxidation behavior of austenitic stainless steels as fuel cladding candidate materials for supercritical-water-cooled reactor (SCWR), including three types of 15Cr–20Ni stainless steels (1520 SSs), in the temperature range of 700–780 °C superheated steam have been investigated. Effect of temperature, dissolved oxygen (DO), degree of cold work (CW), and machined layer by cold drawing process on the oxidation kinetics assuming power-law kinetics are discussed. Characteristics of oxide layers and its relation to oxidation behaviors are also discussed. The effect of DO on the weight gain behavior in superheated steam at 700 °C was minor for all specimens at least up to 200 ppb DO. The tube-shaped specimens of 1520 SSs showed very good oxidation resistance at 700–780 °C. There was no clear difference in the oxidation kinetics among the three investigated types of 1520 SSs. The machined layer formed at the tube surface has a significant role to mitigate oxidation in superheated steam. A fine-grained microstructure near the surface due to recrystallization by cold drawing process is effective to form the protective Cr 2 O 3 layer. It has been suggested that since Cr diffusion in the outside surface of tubes is accelerated as a result of an increased dislocation density and/or grain refinement by cold drawing, tube specimens show very slow oxidation kinetics. Breakdown of the protective Cr 2 O 3 layer and nodule oxide formation were partly observed on the tube-shaped specimens of 15Cr–20Ni SSs. The reliability of Cr 2 O 3 layer has to be carefully examined to predict the oxidation kinetics after long-term exposure

Oxidation behavior of austenitic stainless steels as fuel cladding candidate materials for SCWR in superheated steam

Energy Technology Data Exchange (ETDEWEB)

Abe, Hiroshi, E-mail: hiroshi.abe@qse.tohoku.ac.jp; Hong, Seung Mo; Watanabe, Yutaka

2014-12-15

Highlights: • Effect of cold work on oxidation kinetics was clearly observed for 15Cr–20Ni SS. • The tube-shaped 15Cr–20Ni SS showed very good oxidation resistance. • The machined layer by cold drawing has a significant role to mitigate oxidation. - Abstract: Oxidation behavior of austenitic stainless steels as fuel cladding candidate materials for supercritical-water-cooled reactor (SCWR), including three types of 15Cr–20Ni stainless steels (1520 SSs), in the temperature range of 700–780 °C superheated steam have been investigated. Effect of temperature, dissolved oxygen (DO), degree of cold work (CW), and machined layer by cold drawing process on the oxidation kinetics assuming power-law kinetics are discussed. Characteristics of oxide layers and its relation to oxidation behaviors are also discussed. The effect of DO on the weight gain behavior in superheated steam at 700 °C was minor for all specimens at least up to 200 ppb DO. The tube-shaped specimens of 1520 SSs showed very good oxidation resistance at 700–780 °C. There was no clear difference in the oxidation kinetics among the three investigated types of 1520 SSs. The machined layer formed at the tube surface has a significant role to mitigate oxidation in superheated steam. A fine-grained microstructure near the surface due to recrystallization by cold drawing process is effective to form the protective Cr{sub 2}O{sub 3} layer. It has been suggested that since Cr diffusion in the outside surface of tubes is accelerated as a result of an increased dislocation density and/or grain refinement by cold drawing, tube specimens show very slow oxidation kinetics. Breakdown of the protective Cr{sub 2}O{sub 3} layer and nodule oxide formation were partly observed on the tube-shaped specimens of 15Cr–20Ni SSs. The reliability of Cr{sub 2}O{sub 3} layer has to be carefully examined to predict the oxidation kinetics after long-term exposure.

HTR characteristics affecting reactor physics

International Nuclear Information System (INIS)

Ehlers, K.

1980-01-01

A physical description of high-temperature has-cooled reactors is given, followed by an overview of HTR characteristics. The emphasis is placed on the HTR fuel cycle alternatives and thermohydraulics of pebble bed core. Some prospects of HTRs in the Federal Republic of Germany are also presented

Physical and chemical characteristics of fibrous peat

Science.gov (United States)

Sutejo, Yulindasari; Saggaff, Anis; Rahayu, Wiwik; Hanafiah

2017-11-01

Banyuasin is one of the regency in South Sumatera which has an area of 200.000 Ha of peat land. Peat soil are characterized by high compressibility parameters and low initial shear strength. Block sampling method was used to obtain undisturbed sample. The results of this paper describe the characteristics of peat soil from physical and chemical testing. The physical and chemical characteristics of peat include water content (ω), specific gravity (Gs), Acidity (pH), unit weight (γ), and ignition loss tests. SEM and EDS test was done to determine the differences in fiber content and to analyze chemical elements of the specimen. The average results ω, Gs, and pH are 263.538 %, 1.847, and 3.353. Peat is classified in H4 (by Von Post). The results of organic content (OC), ash content (AC), and fiber content (FC) are found 78.693 %, 21.310 %, and 73.703 %. From the results of physical and chemical tests, the peat in Banyuasin is classified as fibrous peat. All the results of the characteristics and classification of fibrous peat compared with published data were close.

Comparison of measured and calculated reaction rate distributions in an scwr-like test lattice

Energy Technology Data Exchange (ETDEWEB)

Raetz, Dominik, E-mail: dominik.raetz@psi.ch [Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland); Jordan, Kelly A., E-mail: kelly.jordan@psi.ch [Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland); Murphy, Michael F., E-mail: mike.murphy@psi.ch [Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland); Perret, Gregory, E-mail: gregory.perret@psi.ch [Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland); Chawla, Rakesh, E-mail: rakesh.chawla@psi.ch [Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland); Ecole Polytechnique Federale de Lausanne (EPFL), CH-1015 Lausanne, EPFL (Switzerland)

2011-04-15

High resolution gamma-ray spectroscopy measurements were performed on 61 rods of an SCWR-like fuel lattice, after irradiation in the central test zone of the PROTEUS zero-power research reactor at the Paul Scherrer Institute in Switzerland. The derived reaction rates are the capture rate in {sup 238}U (C{sub 8}) and the total fission rate (F{sub tot}), and also the reaction rate ratio C{sub 8}/F{sub tot}. Each of these has been mapped rod-wise on the lattice and compared to calculated results from whole-reactor Monte Carlo simulations with MCNPX. Ratios of calculated to experimental values (C/E's) have been assessed for the C{sub 8}, F{sub tot} and C{sub 8}/F{sub tot} distributions across the lattice. These C/E's show excellent agreement between the calculations and the measurements. For the {sup 238}U capture rate distribution, the 1{sigma} level in the comparisons corresponds to an uncertainty of {+-}0.8%, while for the total fission rate the corresponding value is {+-}0.4%. The uncertainty for C{sub 8}/F{sub tot}, assessed as a reaction rate ratio characterizing each individual rod position in the test lattice, is significantly higher at {+-}2.2%. To determine the reproducibility of these results, the measurements were performed twice, once in 2006 and again in 2009. The agreement between these two measurement sets is within the respective statistical uncertainties.

Photodegradation of polymers physical characteristics and applications

CERN Document Server

Rabek, Jan F

1996-01-01

In this book on physical characteristics and practical aspects of polymer photodegradation Rabek emphasizes the experimental work on the subject. The most important feature of the book is the physical interpretation of polymer degradation, e.g. mechanism of UV/light absorption, formation of excited states, energy transfer mechanism, kinetics, dependence on physical properties of macromolecules and polymer matrices, formation of mechanical defects, practics during environmental ageing. He includes also some aspects of polymer photodegradation in environmental and space condition.

ERP differences between processing of physical characteristics and personality attributes

Science.gov (United States)

2012-01-01

Background Limited data from behavioral and brain-imaging studies indicate that personality traits and physical characteristics are processed differently by the brain. Additionally, electrophysiological results of studies comparing the processing of positive and negative words have produced mixed results. It is therefore not clear how physical and personality attributes with emotional valence (i.e., positive and negative valence) are processed. Thus, this study aimed to examine the neural activity associated with words describing personality traits and physical characteristics with positive or negative emotional valence using Event Related Potentials (ERPs). Methods A sample of 15 healthy adults (7 men, 8 women) participated in a computerized word categorization task. Participants were asked to categorize visual word stimuli as physical characteristics or personality traits, while ERPs were recorded synchronously. Results Behavioral reaction times to negative physical stimuli were shorter compared to negative personality words, however reaction times did not significantly differ for positive stimuli. Electrophysiological results showed that personality stimuli elicited larger P2 and LPC (Late Positive Component) amplitudes compared to physical stimuli, regardless of negative or positive valence. Moreover, negative as compared with positive stimuli elicited larger P2 and LPC amplitudes. Conclusion Personality and physical stimuli were processed differently regardless of positive or negative valence. These findings suggest that personality traits and physical characteristics are differentially classified and are associated with different motivational significance. PMID:22967478

Advanced Computational Thermal Fluid Physics (CTFP) and Its Assessment for Light Water Reactors and Supercritical Reactors

International Nuclear Information System (INIS)

D.M. McEligot; K. G. Condie; G. E. McCreery; H. M. McIlroy; R. J. Pink; L.E. Hochreiter; J.D. Jackson; R.H. Pletcher; B.L. Smith; P. Vukoslavcevic; J.M. Wallace; J.Y. Yoo; J.S. Lee; S.T. Ro; S.O. Park

2005-01-01

Background: The ultimate goal of the study is the improvement of predictive methods for safety analyses and design of Generation IV reactor systems such as supercritical water reactors (SCWR) for higher efficiency, improved performance and operation, design simplification, enhanced safety and reduced waste and cost. The objective of this Korean/US/laboratory/university collaboration of coupled fundamental computational and experimental studies is to develop the supporting knowledge needed for improved predictive techniques for use in the technology development of Generation IV reactor concepts and their passive safety systems. The present study emphasizes SCWR concepts in the Generation IV program

Advanced Computational Thermal Fluid Physics (CTFP) and Its Assessment for Light Water Reactors and Supercritical Reactors

Energy Technology Data Exchange (ETDEWEB)

D.M. McEligot; K. G. Condie; G. E. McCreery; H. M. McIlroy; R. J. Pink; L.E. Hochreiter; J.D. Jackson; R.H. Pletcher; B.L. Smith; P. Vukoslavcevic; J.M. Wallace; J.Y. Yoo; J.S. Lee; S.T. Ro; S.O. Park

2005-10-01

Background: The ultimate goal of the study is the improvement of predictive methods for safety analyses and design of Generation IV reactor systems such as supercritical water reactors (SCWR) for higher efficiency, improved performance and operation, design simplification, enhanced safety and reduced waste and cost. The objective of this Korean / US / laboratory / university collaboration of coupled fundamental computational and experimental studies is to develop the supporting knowledge needed for improved predictive techniques for use in the technology development of Generation IV reactor concepts and their passive safety systems. The present study emphasizes SCWR concepts in the Generation IV program.

Some Physical Characteristics of Microcrystalline Cellulose ...

African Journals Online (AJOL)

Purpose: The microcrystalline cellulose is an important ingredient in pharmaceutical, food, cosmetic and other industries. This study aimed at evaluating the physical characteristics of microcrystalline cellulose (CP-MCC), obtained from the raw cotton of Cochlospermum planchonii. Methods: CP-MCC was obtained from the ...

Evaluation of physical and chemical characteristics of xanthan gums

Directory of Open Access Journals (Sweden)

Claire Tondo Vendruscolo

2007-03-01

Full Text Available This work aimed at evaluating the physical and chemical characteristics of the xanthan produced by Xanthomonas arboricola pv pruni strain 115, and at comparing it with two xanthans obtained from commercial sources – Kelzan e Roeper. The analyzed xanthans showed specified patterns mentioned in the literature, except for low pyruvic acid content in the xanthan produced by strain 115, low monovalent salt content in the Roeper sample and high divalent salt content in both commercial samples. The low pyruvic acid content in the xanthan produced by X. arboricola pv pruni 115 did not affect the aqueous solution viscosity. Thus, the xanthan produced by strain 115 show physical and chemical characteristics that allow its use by the petroleum industry, as well as, in food, pharmaceutical and cosmetics products. Xanthomonas arboricola pv pruni. Xanthan. Physical and chemical characteristics.

Perceptions of Important Characteristics of Physical Activity Facilities: Implications for Engagement in Walking, Moderate and Vigorous Physical Activity.

Science.gov (United States)

Heinrich, Katie M; Haddock, Christopher K; Jitnarin, Natinee; Hughey, Joseph; Berkel, LaVerne A; Poston, Walker S C

2017-01-01

Although few United States adults meet physical activity recommendations, those that do are more likely to access to physical activity facilities. Additionally, vigorous exercisers may be more likely to utilize a nearby physical activity facility, while light-to-moderate exercisers are less likely to do so. However, it is unclear what characteristics of those facilities are most important as well as how those characteristics are related to activity intensity. This study examined relationships between self-reported leisure-time physical activities and the use of and perceived characteristics of physical activity facilities. Data were from a cross-sectional study in a major metropolitan area. Participants ( N  = 582; ages 18-74, mean age = 45 ± 14.7 years) were more likely to be female (69.9%), Caucasian (65.6%), married (51.7%), and have some college education (72.8%). Household surveys queried leisure-time physical activity, regular physical activity facility use, and importance ratings for key facility characteristics. Leisure-time physical activity recommendations were met by 41.0% of participants and 50.9% regularly used a physical activity facility. Regular facility use was positively associated with meeting walking ( p  = 0.036), moderate ( p  importance on facility quality ( p  = 0.022), variety of physical activity options offered ( p  = 0.003), and availability of special equipment and resources ( p  = 0.01). The facility characteristics of low or free cost ( p  = 0.02) and offering childcare ( p  = 0.028) were barriers for walking, and being where friends and family like to go were barriers for moderate leisure-time physical activity ( p  = 0.013). Findings offer insights for structuring interventions using the social ecological model as well as for improving existing physical activity facilities.

Three-dimensional Core Design of a Super Fast Reactor with a High Power Density

International Nuclear Information System (INIS)

Cao, Liangzhi; Oka, Yoshiaki; Ishiwatari, Yuki; Ikejiri, Satoshi; Ju, Haitao

2010-01-01

The SuperCritical Water-cooled Reactor (SCWR) pursues high power density to reduce its capital cost. The fast spectrum SCWR, called a super fast reactor, can be designed with a higher power density than thermal spectrum SCWR. The mechanism of increasing the average power density of the super fast reactor is studied theoretically and numerically. Some key parameters affecting the average power density, including fuel pin outer diameter, fuel pitch, power peaking factor, and the fraction of seed assemblies, are analyzed and optimized to achieve a more compact core. Based on those sensitivity analyses, a compact super fast reactor is successfully designed with an average power density of 294.8 W/cm 3 . The core characteristics are analyzed by using three-dimensional neutronics/thermal-hydraulics coupling method. Numerical results show that all of the design criteria and goals are satisfied

Perceptions of Important Characteristics of Physical Activity Facilities: Implications for Engagement in Walking, Moderate and Vigorous Physical Activity

Directory of Open Access Journals (Sweden)

Katie M. Heinrich

2017-11-01

Full Text Available BackgroundAlthough few United States adults meet physical activity recommendations, those that do are more likely to access to physical activity facilities. Additionally, vigorous exercisers may be more likely to utilize a nearby physical activity facility, while light-to-moderate exercisers are less likely to do so. However, it is unclear what characteristics of those facilities are most important as well as how those characteristics are related to activity intensity.PurposeThis study examined relationships between self-reported leisure-time physical activities and the use of and perceived characteristics of physical activity facilities.MethodsData were from a cross-sectional study in a major metropolitan area. Participants (N = 582; ages 18–74, mean age = 45 ± 14.7 years were more likely to be female (69.9%, Caucasian (65.6%, married (51.7%, and have some college education (72.8%. Household surveys queried leisure-time physical activity, regular physical activity facility use, and importance ratings for key facility characteristics.ResultsLeisure-time physical activity recommendations were met by 41.0% of participants and 50.9% regularly used a physical activity facility. Regular facility use was positively associated with meeting walking (p = 0.036, moderate (p < 0.001, and vigorous (p < 0.001 recommendations. Vigorous exercisers were more likely to use a gym/fitness center (p = 0.006 and to place higher importance on facility quality (p = 0.022, variety of physical activity options offered (p = 0.003, and availability of special equipment and resources (p = 0.01. The facility characteristics of low or free cost (p = 0.02 and offering childcare (p = 0.028 were barriers for walking, and being where friends and family like to go were barriers for moderate leisure-time physical activity (p = 0.013.ConclusionFindings offer insights for structuring interventions using the social ecological

CFD validation of a supercritical water flow for SCWR design heat and mass fluxes

International Nuclear Information System (INIS)

Roelofs, F.; Lycklama a Nijeholt, J.A.; Komen, E.M.J.; Lowenberg, M.; Starflinger, J.

2007-01-01

The applicability of Computational Fluid Dynamics (CFD) for water under supercritical conditions in supercritical water reactors (SCWR) has still to be verified. In the recent past, CFD validation analyses were performed by various institutes for supercritical water in vertical tubes based on the well known experimental data from Yamagata. However, validation using data from experiments with working conditions closer to the actual operational conditions of such reactors is needed. From a literature survey the experiments performed by Herkenrath are selected to perform validation analyses at higher heat fluxes and a higher mass flux. The accuracy of CFD using RANS (Reynolds Average Navier-Stokes) turbulence modelling for supercritical fluids under conditions close to the operational conditions of a supercritical water reactor is determined. It is concluded that the wall temperature can be predicted by RANS CFD, using the RNG k-ε turbulence model, with accuracy in the range of 5% for heat fluxes up to 1100 kW/m 2 and for a bulk enthalpy up to 2200 kJ/kg. For a bulk enthalpy exceeding 2200 kJ/kg, a significant lower accuracy of the CFD predictions (about 3%) is found for the simulations of the experiments of Yamagata in comparison with the simulations of the experiments of Herkenrath. For these experiments, the accuracy is about 18 per cent. This might be a result of the fact that the CFD analyses do not simulate the flattening of the temperature profile at about 2200 kJ/kg which is found in the experiments of Herkenrath. However, the obtained accuracies ranging from 3% to 18% are still deemed to be acceptable for many design purposes. (authors)

Children with Physical Disabilities at School and Home: Physical Activity and Contextual Characteristics.

Science.gov (United States)

Li, Ru; Sit, Cindy Hui-Ping; Yu, Jane Jie; Sum, Raymond Kim-Wai; Wong, Stephen Heung-Sang; Cheng, Kenneth Chik-Chi; McKenzie, Thomas L

2017-06-25

The purpose of this study was to assess the physical activity (PA) of children with physical disabilities (PD) in school and home settings and to simultaneously examine selected contextual characteristics in relation to PA in those settings. Children with PD (N = 35; Mean age = 15.67 ± 4.30 years; 26 boys) were systematically observed using BEACHES (Behaviors of Eating and Activity for Children's Health: Evaluation System) at school (before school, recess, lunch break, after class) and at home (before dinner) during four normal school days. The children spent most of their time in all five settings being physically inactive, but had slightly more PA during recess and lunch break periods. Hierarchical multiple regression revealed that selected contextual characteristics explained 18.9-56.0% ( p motivators at home. This study highlights how little PA that children with PD receive and identifies the importance of the provision of prompts for PA at both school and home with this special population.

Thermal and irradiation effects on high-temperature mechanical properties of materials for SCWR fuel cladding

International Nuclear Information System (INIS)

Kano, F.; Tsuchiya, Y.; Oka, K.

2009-01-01

The thermal and irradiation effects on high-temperature mechanical properties are examined for candidate alloys for fuel cladding of supercritical water-cooled reactors (SCRWs). JMTR (Japan Materials Testing Reactor) and Experimental Fast Reactor JOYO were utilized for neutron irradiation tests, considering their fluence and temperature. Irradiation was performed with JMTR at 600degC up to 4x10 24 n/m 2 and with JOYO at 600degC and 700degC up to 6x10 25 n/m 2 . Tensile test, creep test and hardness measurement were carried out for high-temperature mechanical properties. Based on the uniaxial creep test, the extrapolation curves were drawn with time-temperature relationships utilizing the Larson and Miller Parameter. Several candidate alloys are expected to satisfy the design requirement from the estimation of the creep rupture stress for 50000 hours. Comparing the creep strengths under irradiated and unirradiated conditions, it was inferred that creep deformation was dominated by the thermal effect rather than the irradiation at SCWR core condition. The microstructure was examined using transmission electron microscope (TEM) analysis, focusing on void swelling and helium (He) bubble formation. Void formation was observed in the materials irradiated with JOYO at 600degC but not at 700degC. However, its effect on the deformation of components was estimated to be tolerable since their size and density were negligibly small. The manufacturability of the thin-wall, small-diameter tube was confirmed for the potential candidate alloys through the trial tests in the factory where the fuel cladding tube is manufactured. (author)

PHYSICAL AND MECHANICAL CHARACTERISTICS OF BUILDING MATERIALS OF HISTORIC BUILDINGS

Directory of Open Access Journals (Sweden)

Jiří Witzany

2017-12-01

Full Text Available The article presents partial results of laboratory research into physical and mechanical characteristics of materials most commonly used as walling units in masonry structures of historic and heritage buildings. Core boreholes and specimens for the laboratory research of selected characteristics were sampled from accessible places of historic buildings, which had not been restored or reconstructed. The results of the research brought new knowledge about the unreliability (variance of the properties of historical, mainly natural building materials, and, at the same time, pointed out the need for further research and extension of knowledge necessary for the assessment of residual physical and mechanical characteristics of historic masonry structures.

Variation in the chemical composition, physical characteristics and ...

African Journals Online (AJOL)

Variation in the chemical composition, physical characteristics and energy values of cereal grains produced in the Western Cape area of South Africa. TS Brand, CW Cruywagen, DA Brandt, M Viljoen, WW Burger ...

Physical characteristics as determinants of adolescents' moral ...

African Journals Online (AJOL)

This study was designed to investigate the physical characteristics as determinants of adolescent moral behaviour in Ekiti State secondary schools. Two research hypotheses were formulated. The research design used was the descriptive of the survey type. The population for this study was made up of all adolescents in ...

Stress-corrosion cracking properties of candidate fuel cladding alloys for the Canadian SCWR: a summary of literature data and recent test results

Energy Technology Data Exchange (ETDEWEB)

Zheng, W.; Zeng, Y., E-mail: Wenyue@NRcan.gc.ca [CanmetMATERIALS, Hamilton, ON (Canada); Luo, J. [Univ. of Alberta, Edmonton, AB (Canada); Novotny, R. [JRC-European Commission, Patten (Netherlands); Li, J.; Amirkhiz, B.S., E-mail: Jian.li@nrcan.gc.ca [CanmetMATERIALS, Hamilton, ON (Canada); Guzonas, D. [Atomic Energy of Canada Limited, Chalk River, ON (Canada); Matchim, M.; Collier, J.; Yang, L., E-mail: lin.yang@nrcan.gc.ca [CanmetMATERIALS, Hamilton, ON (Canada)

2014-07-01

Cracking of fuel claddings is a serious concern when selecting candidate alloys for the development of a next-generation reactor. Whether the cracking is due to an environment-metal interaction such as stress-corrosion, or a pure metallurgical process such as localized plastic deformation along grain boundaries, the final impact is the same: cracking of the cladding can lead to fuel failure. In the course of a review of potential candidate alloys in preparation for further assessment under conditions relevant to the Canadian SCWR concept, relevant cracking studies reported for five short-listed alloys (namely 310S, 347H, 800H, 625 and 214) in the open literature were examined, and the key findings are provided in this paper. Discussions are also made of the recent SCC data from capsule tests and slow-strain rate tests (SSRT) in supercritical water. The data suggest that there is a threshold strain level below which SCC is not developed during SSRT tests. The practical implication of this finding is also discussed. (author)

Children with Physical Disabilities at School and Home: Physical Activity and Contextual Characteristics

Directory of Open Access Journals (Sweden)

Ru Li

2017-06-01

Full Text Available The purpose of this study was to assess the physical activity (PA of children with physical disabilities (PD in school and home settings and to simultaneously examine selected contextual characteristics in relation to PA in those settings. Children with PD (N = 35; Mean age = 15.67 ± 4.30 years; 26 boys were systematically observed using BEACHES (Behaviors of Eating and Activity for Children’s Health: Evaluation System at school (before school, recess, lunch break, after class and at home (before dinner during four normal school days. The children spent most of their time in all five settings being physically inactive, but had slightly more PA during recess and lunch break periods. Hierarchical multiple regression revealed that selected contextual characteristics explained 18.9–56.0% (p < 0.01 of the variance predicting moderate-to-vigorous physical activity (MVPA after controlling for demographic variables. Prompts to be active were positively associated with MVPA at school and the presence of fathers and fathers being motivators at home. This study highlights how little PA that children with PD receive and identifies the importance of the provision of prompts for PA at both school and home with this special population.

Anthropometric and physical fitness characteristics of young male soccer players

Directory of Open Access Journals (Sweden)

Leslie Andrews Portes

2010-06-01

Full Text Available The objective of this study was to determine anthropometric and physical fitnesscharacteristics of Brazilian male children and adolescents at the beginning of soccer training. Inthis study, 282 male soccer players ranging in age from 10 to 13 years were evaluated. The athletesparticipated in a formal soccer training program 3 times per week, with each training lasting 3hours. Anthropometric and physical fitness parameters were obtained. The boys were divided intoage classes and prevalence data were analyzed using Pearson’s chi-square test. Parametric datawere compared by one-way ANOVA or the Kruskal-Wallis test, when necessary. The resultsare expressed as the mean ± standard deviation and a p value <0.05 was considered to be significant.Growth, development, body adiposity and physical fitness characteristics were adequateand proportional to age among the boys studied (p<0.05. It was concluded that anthropometricand physical fitness characteristics of young male elite soccer players improve with and areproportional to age. Children and adolescents greatly benefit from regular physical activity. Thepresent results show that young male soccer players present adequate anthropometric conditionsand physical fitness prior to the initiation of formal training at soccer clubs.

Interaction Between Physical Environment, Social Environment, and Child Characteristics in Determining Physical Activity at Child Care

NARCIS (Netherlands)

Gubbels, J.S.; Kremers, S.P.J.; Kann, D.H.H. van; Stafleu, A.; Candel, M.J.J.M.; Dagnelie, P.C.; Thijs, C.; Vries, N.K.de

2011-01-01

Objective: To investigate the association between the child-care environment and physical activity of 2- and 3-year-olds. Based on an ecological view of environmental influences on health behavior, we hypothesized that the social and physical environment, as well as child characteristics (age and

Physical Characteristics Of Female Basketball Players According To Playing Position

Directory of Open Access Journals (Sweden)

Kucsa Richard

2015-05-01

Full Text Available Physical characteristics play an important role in the selection of young basketball players and the progress in their playing performance. The aim of the study was to analyze differences in chosen physical characteristics of Slovak U17 female basketball players with respect to their playing positions. We assumed, that there will be statistically significant differences between playing positions in each performance tests results. Chosen characteristics were analyzed for 14 players (mean/SD, age 16.34±0.82; body height 179.72±8.04 cm; body weight 67.62±7.10 kg; body fat 16.59±2.04 %; VO2max 46.20±4.71 ml.kg−1.min−1 according to their playing positions (guard, forward, center. Five specific performance tests for each player were conducted as a 3/4 Basketball court sprint, 10 × 5m Shuttle test, Lane agility drill, No-step vertical jump and Maximum vertical jump. The differences in tests results by playing positions were evaluated by one-way ANOVA. There were no significant differences found in results of chosen performance tests between playing positions (p>.05. In spite of fact, that there were no significant differences, we found interesting results between playing positions in physical characteristics. Guards had better results in speed (3.73±0.16 s, quickness (17.43±0.56 s and both lower-body power tests (47.16±3.06 cm; 57.00±3.40 cm than forwards and centers. Forwards had the best results in agility test (12.54±0.43 s. The results of this study produce useful information about physical characteristics of young basketball players according to their playing position and help to diagnose and improve their performance.

Characteristics of joint physical custody families in Flanders

Directory of Open Access Journals (Sweden)

An Katrien Sodermans

2013-04-01

Full Text Available BACKGROUND Research conducted in the 1990s showed that children who live alternately with their mother and father after divorce (joint physical custody have closer relationships with both parents and better emotional outcomes. In 1995 and 2006, joint legal custody and joint physical custody became the default judicial recommendations in Belgium. These defaults served to increase the incidence of joint custody arrangements. However, parents with joint physical custody arrangements who divorced before 2006 may have had higher socio-economic standing and lower conflict relationships than couples that divorced afterwards. Thus earlier research on the impact of joint physical custody arrangements on child outcomes may be too optimistic when considering children of recently divorced parents. OBJECTIVE This study examines the characteristics of four different physical custody arrangements (sole mother, sole father, joint physical, and flexible custody in Flanders, Belgium, and whether these characteristics have changed over time. The legal changes in 1995 and 2006 are used to distinguish three divorce cohorts. METHODS We use data on 2,207 couples that legally divorced between 1971 and 2010 from the Divorce in Flanders project, a large-scale representative multi-actor survey. Multinomial logistic regression models provide estimates of the likelihoods of different physical custody arrangements. RESULTS The incidence of sole mother custody has decreased over the last decades and children increasingly alternate between the households of the mother and the father after divorce. The incidence of sole father custody has remained low. Higher educated parents are more likely to have joint physical custody arrangements than parents from lower social classes. Also, within couples, relative educational levels are important because the higher educated spouse is more likely to have physical custody of the child. We also find that the associations between socio

Structural Characteristics and Physical Properties of Tectonically Deformed Coals

OpenAIRE

Yiwen Ju; Zhifeng Yan; Xiaoshi Li; Quanlin Hou; Wenjing Zhang; Lizhi Fang; Liye Yu; Mingming Wei

2012-01-01

Different mechanisms of deformation could make different influence on inner structure and physical properties of tectonically deformed coal (TDC) reservoirs. This paper discusses the relationship between macromolecular structure and physical properties of the Huaibei-Huainan coal mine areas in southern North China. The macromolecular structure and pore characteristics are systematically investigated by using techniques such as X-ray diffraction (XRD), high-resolution transmission electron mic...

Characteristics of physical activity programs in the Brazilian primary health care system

Directory of Open Access Journals (Sweden)

Grace Angélica de Oliveira Gomes

2014-10-01

Full Text Available The aim of this study was to describe the characteristics of programs that promote physical activity in the public primary care system by region of Brazil, subject to the presence or absence of multidisciplinary primary care teams (NASF. We conducted a cross sectional and population-based telephone survey of the health unit coordinators from 1,251 health care units. Coordinators were asked about the presence and characteristics of physical activity programs. Four out of ten health units reported having a physical activity intervention program, the most common involving walking groups. Most of the activities were performed in the morning, once or twice a week, and in sessions of 30 minutes or more. Physical education professionals were primarily responsible for directing the activities. Interventions occurred in the health unit itself or in adjacent community spaces. In general, these characteristics were similar between units with or without NASF, but varied substantially across regions. These findings will guide future physical activity policies and programs within primary care in Brazil.

PHYSICAL EDUCATION AND INDIVIDUAL CHARACTERISTICS OF THE AGE SPECIFIC DEVELOPMENT

Directory of Open Access Journals (Sweden)

Е. М. Revenko

2017-01-01

Full Text Available The aim of this paper is scientific substantiation of the importance of the individual characteristics of the age specific youth development which will result in the rational modelling of students’ physical education.Methodology and research methods. The methods involve collection of experimental data carried out by means of evaluation of motor abilities and general intelligence of students. Motor abilities of students were studied by measuring of strength (dead lift dynamometry, strength endurance (pull-up, speed and power abilities (standing jump, as well as speed ability (running 30, 60 or 100 m, depending on age, aerobic endurance (running 1000 or 3000 m, depending on age. The dynamics of integral physical preparedness (DIPP of each student was calculated by calculation the arithmetic mean values of the growth rates of the development of motor abilities. Assessment of General Intelligence (GI of the 8th, 10th and 11th-grades school pupils as well as the 1st to 3rd year students was carried out through the test of R. Amthauer in the adaptation of L. A. Yazykova, and school pupils of the 6th grade were assessed through the Intelligent Test (GIT.Results. Discrepancies in the dynamics of the mental and motor areas development of maturing personality, which are interpreted as individual characteristics of the age specific development are experimentally revealed. Individual psychological differences leading to the different susceptibility to the development of motor and intellectual abilities appearing in adolescence and early adolescence are analysed. A leading role of activity in formation of the individual characteristics of the age specific development is substantiated. The conclusion of necessity to formulate to the students differing in individual characteristics of the age specific development differentiated in the complexity requirements and motor tasks in the course of physical training is made.Scientific novelty. For the first time

Oak Ridge Reservation. Physical Characteristics and National Resources

Energy Technology Data Exchange (ETDEWEB)

Parr, Patricia Dreyer [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Joan, F. Hughes [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2006-10-09

The topology, geology, hydrology, vegetation, and wildlife of the Oak Ridge Reservation (ORR) provide a complex and intricate array of resources that directly impact land stewardship and use decisions. The purpose of this document is to consolidate general information regarding the natural resources and physical characteristics of the ORR.

Comparative study of soil physical characteristics of Jaipur district ...

African Journals Online (AJOL)

Vikram

The present study was carried in Jaipur district of Rajasthan state to measure physical characteristics of the soil samples from different districts of Jaipur. Soils samples were taken at ..... Random field models in earth sciences. Academic. Press.

Study of a fuel assembly for the nuclear reactor of IV generation cooled with supercritical water

International Nuclear Information System (INIS)

Barragan M, A.; Martin del Campo M, C.; Francois L, J. L.; Espinosa P, G.

2011-11-01

In this work a neutron study is presented about a square assembly design of double line of fuel rods, with moderator box to the center of the arrangement, for a nuclear reactor cooled with supercritical water (SCWR). The SCWR reactor was chosen by the characteristics of its design, mainly because is based in light water reactors (PWR and BWR), and the operational experience that has of them allow to use models and similar programs to simulate the fuel and the nucleus of this type of reactors. To develop the necessary models and to carry out the design and analysis of the SCWR reactor, the neutron codes MCNPX and Helios were used. The reason of using both codes, is because the code MCNPX used thoroughly in the neutron simulation of these reactors, it has been our reference code to analyze the results obtained with the Helios code which results are more efficient because its calculation times are minors. In the nucleus design the same parameters for both codes were considered. The results show that the design with Helios is a viable option to simulate these reactors since their values of the neutrons multiplication factor are very similar to those obtained with MCNPX. On the other hand, it could be corroborated that the CASMO-4 code is inadequate to simulate the fuel to the temperature conditions and water pressure in the SCWR. (Author)

Study of a fuel assembly for the nuclear reactor of IV generation cooled with supercritical water; Estudio de un ensamble de combustible para el reactor nuclear de generacion IV enfriado con agua supercritica

Energy Technology Data Exchange (ETDEWEB)

Barragan M, A.; Martin del Campo M, C.; Francois L, J. L. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Ciudad Universitaria, 04510 Mexico D. F. (Mexico); Espinosa P, G., E-mail: albrm29@yahoo.com [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Area de Ingenieria en Recursos Energeticos, Av. San Rafael Atlixco 186, Col. Vicentina, 09340 Mexico D. F. (MX)

2011-11-15

In this work a neutron study is presented about a square assembly design of double line of fuel rods, with moderator box to the center of the arrangement, for a nuclear reactor cooled with supercritical water (SCWR). The SCWR reactor was chosen by the characteristics of its design, mainly because is based in light water reactors (PWR and BWR), and the operational experience that has of them allow to use models and similar programs to simulate the fuel and the nucleus of this type of reactors. To develop the necessary models and to carry out the design and analysis of the SCWR reactor, the neutron codes MCNPX and Helios were used. The reason of using both codes, is because the code MCNPX used thoroughly in the neutron simulation of these reactors, it has been our reference code to analyze the results obtained with the Helios code which results are more efficient because its calculation times are minors. In the nucleus design the same parameters for both codes were considered. The results show that the design with Helios is a viable option to simulate these reactors since their values of the neutrons multiplication factor are very similar to those obtained with MCNPX. On the other hand, it could be corroborated that the CASMO-4 code is inadequate to simulate the fuel to the temperature conditions and water pressure in the SCWR. (Author)

Start up physics tests of units 5 and 6 (WWER 1000) at Kozloduy NPP by comparison with the calculated neutron physics characteristics

International Nuclear Information System (INIS)

Antov, A.; Stoyanova, I.

2008-01-01

In conjunction with each refuelling shutdown of the reactor core, nuclear design calculations are performed to ensure that the reactor physics characteristics of the new core will be consistent with the safety limits. Prior to return to normal operation, a physics test program is required to determine if the operating characteristics of the core are consistent with the design predictions and to ensure that the core can be operated as designed. Successful completion of the physics test program is demonstrated when the test results agree with the predicted results within predetermined test criteria. Successful completion of the physics test program and successful completion of other tests, which are performed after each refuelling provides assurance that the plant can be operated as designed. The calculated neutron-physics characteristics values of Kozloduy NPP Unit 5 and Unit 6 (WWER 1000) obtained by the computer code package KASKAD are compared with the obtained results during the start up physics tests. The core fuel loading consists of 163 fuel assemblies (FAs). The calculated values are given according to actual experimental conditions of the reactor core during start up physics tests. The report includes comparisons between calculation results by code package KASKAD (BIPR7A) and experimental data values of main neutron-physics characteristics during start up physics tests in selected recent cycles of Kozloduy NPP Unit 5 and Unit 6. (authors)

Start up physics tests of Units 5 and 6 (WWER-1000) at Kozloduy NPP by comparison with the calculated neutron physics characteristics

International Nuclear Information System (INIS)

Stoyanova, I.; Antov, A.

2007-01-01

In conjunction with each refuelling shutdown of the reactor core, nuclear design calculations are performed to ensure that the reactor physics characteristics of the new core will be consistent with the safety limits. Prior to return to normal operation, a physics test program is required to determine if the operating characteristics of the core are consistent with the design predictions and to ensure that the core can be operated as designed. Successful completion of the physics test program is demonstrated when the test results agree with the predicted results within predetermined test criteria. Successful completion of the physics test program and successful completion of other tests which are performed after each refuelling provides assurance that the plant can be operated as designed. The calculated neutron-physics characteristics values of Kozloduy NPP Unit 5 and Unit 6 (WWER 1000) obtained by the computer code package KASKAD are compared with the obtained results during the start up physics tests. The core fuel loading consists of 163 fuel assemblies. The calculated values are given according to actual experimental conditions of the reactor core during start up physics tests. The report includes comparisons between calculation results by code package KASKAD (BIPR7A) and experimental data values of main neutron-physics characteristics during start up physics tests in selected recent cycles of Kozloduy NPP Unit 5 and Unit 6 (Authors)

Evaluation of some physical fitness characteristics in 11-13 years old

Directory of Open Access Journals (Sweden)

Ileana Monica Popovici

2017-01-01

Full Text Available Abstract Many studies indicate that a physical fitness characteristic is an important marker for healthy body and healthy mind. The major purpose of this study is to explore the levels of physical fitness of the students between 11 and 13 years of age. The participants of this study are 251 volunteer students including 95 boys and 156 girls between the ages 11 and 13 who participated at physical education lessons two times a week. The students were assessed for six anthropometric characteristics and five physical tests. Mean, standard deviation, and multiple comparisons were used for statistical analyses to find out differences between sexes with ANOVA, and Bonferoni Tests for differences between ages. Anthropometric measurements were reported as body mass index, height, weight, arm span, waist and hip and physical fitness traits such as agility, balance and strength. The findings suggest some differences between female and male students and between ages; male participants obtained higher results as means compared to female participants. Keywords: anthropometrics, agility, balances, strength, students

Characteristics of Missing Physical Activity Data in Children and Youth

Science.gov (United States)

Zhuang, Jie; Chen, Peijie; Wang, Chao; Huang, Liang; Zhu, Zheng; Zhang, Wenjie; Fan, Xiang

2013-01-01

Purpose: The purpose of this study was to investigate the characteristics of missing physical activity (PA) data of children and youth. Method: PA data from the Chinese City Children and Youth Physical Activity Study ("N" = 2,758; 1,438 boys and 1,320 girls; aged 9-17 years old) were used for the study. After the data were sorted by the…

A study on the effects of fatigue driving and drunk driving on drivers' physical characteristics.

Science.gov (United States)

Zhang, Xingjian; Zhao, Xiaohua; Du, Hongji; Rong, Jian

2014-01-01

The purpose of this study was to analyze the effects of fatigue driving and drunk driving on drivers' physical characteristics; to analyze the differences in drivers' physical characteristics affected by different kinds of fatigue; and to compare the differences in the effects of the 2 driving states, fatigue driving and drunk driving. Twenty-five participants' physical characteristics were collected under 5 controlled situations: normal, tired driving, drowsy driving, drowsiness + tired driving, and drunk driving. In this article, fatigue driving refers to tiredness and drowsiness and includes 3 situations: tired driving, drowsy driving, and drowsiness + tired driving. The drivers' physical characteristics were measured in terms of 9 parameters: systolic blood pressure (SBP), heart rate (HR), eyesight, dynamic visual acuity (DVA), time for dark adaption (TDA), reaction time to sound (RTS), reaction time to light (RTL), deviation of depth perception (DDP), and time deviation of speed anticipation (TDSA). They were analyzed using analysis of variance (ANOVA) with repeated measures. Binary logistical regression analysis was used to explain the relationship between drivers' physical characteristics and the two driving states. Most of the drivers' physical characteristic parameters were found to be significantly different under the influence of different situations. Four indicators are significantly affected by fatigue driving during deep fatigue (in decreasing order of influence): HR, RTL, SBP and RTS. HR and RTL are significant in the logistical regression model of the drowsiness + tired driving situation and normal situations. Six indicators of the drivers' physical characteristics are significantly affected by drunk driving (in decreasing order of influence): SBP, RTL, DDP, eyesight, RTS, and TDSA. SBP and DDP have a significant effect in the logistical regression model of the drunk driving situation and the normal situation. Both fatigue driving and drunk driving

Schoolyard Characteristics, Physical Activity, and Sedentary Behavior: Combining GPS and Accelerometry

Science.gov (United States)

Van Kann, Dave H. H.; de Vries, Sanne I.; Schipperijn, Jasper; de Vries, Nanne K.; Jansen, Maria W. J.; Kremers, Stef P. J.

2016-01-01

Background: Physical activity (PA) is decreasing among children, while sedentary behavior (SB) is increasing. Schoolyards seem suitable settings to influence children's PA behavior. This study investigated the associations between schoolyard characteristics and moderate-to-vigorous physical activity (MVPA) and SB of children aged 8-11 years at…

Effect of Tube Diameter on Heat Transfer to Vertically Upward Flowing Supercritical CO2

International Nuclear Information System (INIS)

Kang, Deog Ji; Kim, Sin; Bae, Yoon Yeong; Kim, Hwan Yeol; Kim, Hyung Rae

2007-01-01

Heat transfer characteristics of supercritical carbon dioxide are being investigated experimentally in the test loop named as SPHINX(Supercritical Pressure Heat Transfer Investigation for NeXt generation) at KAERI. The main purpose of the experiment is to provide a reliable heat transfer database for a SCWR (SuperCritical Water-cooled Reactor) by a prudent extension of the carbon dioxide test results to the estimation of a heat transfer for water. The produced data will be used in the thermo-hydraulic design of core and safety analysis for SCWR. The aim of the present paper is to study the influence of a tube diameter on a heat transfer. The experiments were completed for tubes of an inside diameter of 4.4mm and 9.0mm, respectively. The heat transfer characteristics from the two tubes of different diameters were compared and discussed

Effect of Tube Diameter on Heat Transfer to Vertically Upward Flowing Supercritical CO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Kang, Deog Ji; Kim, Sin [Cheju National University, Jeju (Korea, Republic of); Bae, Yoon Yeong; Kim, Hwan Yeol; Kim, Hyung Rae [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2007-07-01

Heat transfer characteristics of supercritical carbon dioxide are being investigated experimentally in the test loop named as SPHINX(Supercritical Pressure Heat Transfer Investigation for NeXt generation) at KAERI. The main purpose of the experiment is to provide a reliable heat transfer database for a SCWR (SuperCritical Water-cooled Reactor) by a prudent extension of the carbon dioxide test results to the estimation of a heat transfer for water. The produced data will be used in the thermo-hydraulic design of core and safety analysis for SCWR. The aim of the present paper is to study the influence of a tube diameter on a heat transfer. The experiments were completed for tubes of an inside diameter of 4.4mm and 9.0mm, respectively. The heat transfer characteristics from the two tubes of different diameters were compared and discussed.

The physical properties and compaction characteristics of swelling soils

International Nuclear Information System (INIS)

Komine, Hideo; Ogata, Nobuhide

1990-01-01

Expansive soils have recently attracted increasing attention as the back filling material for the repositories of high level nuclear wastes or as the material for improving extremely soft grounds. However, since very little has been known concerning the physical and mechanical properties of such materials, it is necessary to clarify the swelling, compaction and thermal characteristics of expansive soils. For this purpose, various kinds of index tests and a series of static compaction tests were performed using several kinds of swelling soils in order to investigate the relationship between the fundamental physical properties and the compaction characteristics. Since the ordinary testing method stipulated in JIS is difficult to perform for such expansive soils, the new method was proposed to obtained the reliable values of specific gravity, grain size distribution and liquid/plastic limits. By this method, some representative values were presented for various kinds of clay including bentonite. As the results of static compaction tests, the compaction characteristics of clay were strongly dependent on the plastic limit of clay. The maximum dry density and optimum water content were strongly dependent on both plastic limit and compaction pressure. (K.I.)

Physical characteristics of GE [General Electric] BWR [boiling-water reactor] fuel assemblies

International Nuclear Information System (INIS)

Moore, R.S.; Notz, K.J.

1989-06-01

The physical characteristics of fuel assemblies manufactured by the General Electric Company for boiling-water reactors are classified and described. The classification into assembly types is based on the GE reactor product line, the Characteristics Data Base (CDB) assembly class, and the GE fuel design. Thirty production assembly types are identified. Detailed physical data are presented for each assembly type in an appendix. Descriptions of special (nonstandard) fuels are also reported. 52 refs., 1 fig., 6 tabs

Supercritical Water Reactors

International Nuclear Information System (INIS)

Bouchter, J.C.; Dufour, P.; Guidez, J.; Latge, C.; Renault, C.; Rimpault, G.

2014-01-01

The supercritical water reactor (SCWR) is one of the 6 concepts selected for the 4. generation of nuclear reactors. SCWR is a new concept, it is an attempt to optimize boiling water reactors by using the main advantages of supercritical water: only liquid phase and a high calorific capacity. The SCWR requires very high temperatures (over 375 C degrees) and very high pressures (over 22.1 MPa) to operate which allows a high conversion yield (44% instead of 33% for a PWR). Low volumes of coolant are necessary which makes the neutron spectrum shift towards higher energies and it is then possible to consider fast reactors operating with supercritical water. The main drawbacks of supercritical water is the necessity to use very high pressures which has important constraints on the reactor design, its physical properties (density, calorific capacity) that vary strongly with temperatures and pressures and its very high corrosiveness. The feasibility of the concept is not yet assured in terms of adequate materials that resist to corrosion, reactor stability, reactor safety, and reactor behaviour in accidental situations. (A.C.)

Physical Characteristics of the Dalat Nuclear Research Reactor

International Nuclear Information System (INIS)

Ngo Quang Huy

1994-10-01

The operation of the TRIGA MARK II reactor of nominal power 250 KW has been stopped as all the fuel elements have been dismounted and taken away in 1968. The reconstruction of the reactor was accomplished with Russian technological assistance after 1975. The nominal power of the reconstructed reactor is of 500 KW. The recent Dalat reactor is unique of its kind in the world: Russian-designed core combined with left-over infrastructure of the American-made TRIGA II. The reactor was loaded in November 1983. It has reached physical criticality on 1/11/1983 (without central neutron trap) and on 18/12/1983 (with central neutron trap). The power start up occurred in February 1984 and from 20/3/1984 the reactor began to be operated at the nominal power 500 KW. The selected reports included in the proceedings reflect the start up procedures and numerous results obtained in the Dalat Nuclear Research Institute and the Centre of Nuclear Techniques on the determination of different physical characteristics of the reactor. These characteristics are of the first importance for the safe operation of the Dalat reactor

Physical characteristics of cinnamon oil microcapsule

Science.gov (United States)

Hermanto, R. F.; Khasanah, L. U.; Kawiji; Atmaka, W.; Manuhara, G. J.; Utami, R.

2016-02-01

Cinnamon (Cinnamomum burmanii) oil products can be obtained from the bark by steam distillation. Essential oils are susceptible to high temperatures, oxidation, UV light, and humidity. Microencapsulation may change essential oils into powder, protect the sensitive core material and reduce the amount of flavor which lost during storage. In the microencapsulation, one of the important factors is the type of coating agent. The objective of this work was to characterize the cinnamon oil microcapsule. Ratio variations of coating agent maltodextrin and gum arabic were (1:0); (0:1); (1:1); (2:3). Physical characteristics such as water content, solubility, bulk density, surface oil, and microencapsulation efficiency of samples were investigated. Results showed that the ratio variations of the coating agent significantly affected the water content, bulk density, surface oil and microencapsulation efficiency but significantly affected the water solubility. Characteristics of selected microcapsule were 6.13% water content; 96.33% solubility; 0.46 g/cm3 bulk density; 2.68% surface oil; 70.68% microencapsulation efficiency and microstructures were rather good.

Pervious concrete physical characteristics and effectiveness in stormwater pollution reduction.

Science.gov (United States)

2016-04-01

The objective of this research was to investigate the physical/chemical and water flow characteristics of various previous concrete : mixes made of different concrete materials and their effectiveness in attenuating water pollution. Four pervious con...

Physical characteristics of shrub and conifer fuels for fire behavior models

Science.gov (United States)

Jonathan R. Gallacher; Thomas H. Fletcher; Victoria Lansinger; Sydney Hansen; Taylor Ellsworth; David R. Weise

2017-01-01

The physical properties and dimensions of foliage are necessary inputs for some fire spread models. Currently, almost no data exist on these plant characteristics to fill this need. In this report, we measured the physical properties and dimensions of the foliage from 10 live shrub and conifer fuels throughout a 1-year period. We developed models to predict relative...

Evaluation of Some Physical Fitness Characteristics in 11-13 Years Old

Science.gov (United States)

Popovici, Ileana Monica; Popescu, Lucian; Radu, Liliana-Elisabeta

2017-01-01

Many studies indicate that a physical fitness characteristic is an important marker for healthy body and healthy mind. The major purpose of this study is to explore the levels of physical fitness of the students between 11 and 13 years of age. The participants of this study are 251 volunteer students including 95 boys and 156 girls between the…

Characteristics of HTTR's startup physics tests

International Nuclear Information System (INIS)

Nojiri, N.; Nakano, M.; Takeuchi, M.; Pohl, P.; Yamashita, K.

1997-01-01

The High Temperature Engineering Test Reactor (HTTR) which is under construction by Japan Atomic Energy Research Institute (JAERI) is a graphite-moderated and helium gas-cooled reactor with an outlet temperature of 950 deg. C and a thermal output of 30MW. The first criticality is expected at the end of October 1997. The start-up physics tests (SPTs) are planned in the period from mid 1997 to the end of 1998. Characteristic items of the SPTs are: 1) Criticality approach; 2) Tests on a preliminary annual core; 3) Measurement of scram reactivity; 4) Excess reactivity test; 5) Measurements along with a 2-step-scram reactor shutdown procedure. (author)

Perceived neighborhood environmental characteristics and different types of physical activity among Brazilian adolescents.

Science.gov (United States)

Mendonça, Gerfeson; Florindo, Alex Antonio; Rech, Cassiano Ricardo; Freitas, Delma Katiana Silva de; Farias Júnior, José Cazuza de

2018-05-01

Little is known about the association between environmental characteristics and types of physical activity in adolescents in a Latin American context. The aim of this study was to examine the association between perceived neighborhood environmental characteristics and different types of physical activity in 2,874 adolescents from Joao Pessoa, Paraiba State, Northeastern Brazil. The types of activity measured by questionnaire (≥10 min/day) included sports, physical exercises, active commuting and recreational activities. Neighborhood characteristics were measured by a 15-item scale. Multilevel analyses showed that adolescents who reported "having places they liked to go to" (OR = 1.41; 95%CI: 1.10-1.79) and "places with opportunities to practice" (OR = 1.29; 95%CI: 1.01-1.65) were more likely to play sports. "Seeing interesting things while walking" (OR = 1.24; 95%CI: 1.01-1.53) and "Seeing other adolescents engaged in physical activity" (OR = 1.47; 95%CI: 1,05-2,06) were associated with exercises. "Seeing other adolescents engaged in physical activity" (OR = 1.47; 95%CI: 1.18-1.82), "the neighborhood is not violent" (OR = 1.29; 95%CI: 1.04-1.60) and "having places they like to go to" (OR = 1.59; 95%CI: 1.13-2.25) were positively associated and "places with opportunities to practice" (OR = 0.79; 95%CI: 0.63-0.98) inversely related to active commuting. "Seeing other adolescents engaged in physical activities" (OR = 1.31; 95%CI: 1.05-1.63) and "seeing interesting things while walking" (OR = 1.26; 95%CI: 1.02-1.56) were associated with recreational activities. Neighborhood environmental characteristics associated with the physical activity vary with the type of practices adopted by adolescents.

Thermodynamic properties of water in the critical region

International Nuclear Information System (INIS)

Veloso, Marcelo A.

2009-01-01

The supercritical-water-cooled reactor (SCWR) is one of the nuclear reactor technologies selected for research and development under the Generation IV program. SCWRs offer the potential for high thermal efficiencies and considerable plant simplifications for improved economics. One of the main characteristics of critical water is the strong variations of its thermal-physical properties in the vicinity of the critical point. These large variations may result in an unusual heat transfer behavior. The 1967 IFC Formulation for Industrial Use, which until 1998 formed the basis of steam tables used in many areas of steam power industry throughout the world since the late 1960's, has been now replaced with the IAPWS IF-97 Formulation for the Thermodynamic Properties of Water and Steam for Industrial Use, adopted by the International Association for the Properties of Water and Steam (IAPWS) in 1997. An IAPWS release points out that this new formulation has some unsatisfactory features in the immediate vicinity of the critical point. In order to investigate this singular aspect, which is crucial to better understand the heat transfer mechanism in a SCWR system, predictions by the IAPWS-IF97 formulation will be compared with thermodynamic properties values predicted by an alternative crossover equation of state as well as with experimental data found in literature. (author)

The physical characteristics of the surface of the satellites and rings of giant planets

Science.gov (United States)

Vidmachenko, A. P.; Morozhenko, O. V.

2017-10-01

The book gives the main results of the study of the optical characteristics of the field diffusely reflected radiation and physical characteristics of the surface of the satellites of giant planets and their rings. The publication is intended for teachers of higher educational institutions, students - graduate students and professionals who specialize in experimental physics and astrophysics and solar system surfaces.

Review of physical and socio-economic characteristics and intervention approaches of informal settlements

CSIR Research Space (South Africa)

Wekesa, BW

2011-04-01

Full Text Available -1 Habitat International Volume 35, Issue 2, April 2011, Pages 238-245 A review of physical and socio-economic characteristics and intervention approaches of informal settlements B.W. Wekesaa, b, , , G.S. Steyna, 1, , F.A.O. (Fred) Otienoc, 2, , a... a literature survey, this paper reviews physical and socio-economic characteristics and the factors attributed to proliferation of the informal settlements and intervention approaches. The main objective was to establish how such settlements could...

Physical activity and body mass index: the contribution of age and workplace characteristics.

Science.gov (United States)

Nelson, Candace C; Wagner, Gregory R; Caban-Martinez, Alberto J; Buxton, Orfeu M; Kenwood, Christopher T; Sabbath, Erika L; Hashimoto, Dean M; Hopcia, Karen; Allen, Jennifer; Sorensen, Glorian

2014-03-01

The workplace is an important domain for adults, and many effective interventions targeting physical activity and weight reduction have been implemented in the workplace. However, the U.S. workforce is aging, and few studies have examined the relationship of BMI, physical activity, and age as they relate to workplace characteristics. This paper reports on the distribution of physical activity and BMI by age in a population of hospital-based healthcare workers and investigates the relationships among workplace characteristics, physical activity, and BMI. Data from a survey of patient care workers in two large academic hospitals in the Boston area were collected in late 2009 and analyzed in early 2013. In multivariate models, workers reporting greater decision latitude (OR=1.02, 95% CI=1.01, 1.03) and job flexibility (OR=1.05, 95% CI=1.01, 1.10) reported greater physical activity. Overweight and obesity increased with age (pworkplace characteristics. Sleep deficiency (OR=1.56, 95% CI=1.15, 2.12) and workplace harassment (OR=1.62, 95% CI=1.20, 2.18) were also associated with obesity. These findings underscore the persistent impact of the work environment for workers of all ages. Based on these results, programs or policies aimed at improving the work environment, especially decision latitude, job flexibility, and workplace harassment should be included in the design of worksite-based health promotion interventions targeting physical activity or obesity. Copyright © 2014 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

In situ real-time measurement of physical characteristics of airborne bacterial particles

Science.gov (United States)

Jung, Jae Hee; Lee, Jung Eun

2013-12-01

Bioaerosols, including aerosolized bacteria, viruses, and fungi, are associated with public health and environmental problems. One promising control method to reduce the harmful effects of bioaerosols is thermal inactivation via a continuous-flow high-temperature short-time (HTST) system. However, variations in bioaerosol physical characteristics - for example, the particle size and shape - during the continuous-flow inactivation process can change the transport properties in the air, which can affect particle deposition in the human respiratory system or the filtration efficiency of ventilation systems. Real-time particle monitoring techniques are a desirable alternative to the time-consuming process of microscopic analysis that is conventionally used in sampling and particle characterization. Here, we report in situ real-time optical scattering measurements of the physical characteristics of airborne bacteria particles following an HTST process in a continuous-flow system. Our results demonstrate that the aerodynamic diameter of bacterial aerosols decreases when exposed to a high-temperature environment, and that the shape of the bacterial cells is significantly altered. These variations in physical characteristics using optical scattering measurements were found to be in agreement with the results of scanning electron microscopy analysis.

Development of sub-channel/system coupled code and its application to a supercritical water-cooled test loop

International Nuclear Information System (INIS)

Liu, X.J.; Yang, T.; Cheng, X.

2014-01-01

To analyze the local thermal-hydraulic parameters in the supercritical water reactor-fuel qualification test (SCWR-FQT) fuel bundle with a flow blockage, a coupled sub-channel and system code system is developed in this paper. Both of the sub-channel code and system code are adapted to transient analysis of SCWR. Two codes are coupled by data transfer and data adaptation at the interface. In the coupled code, the whole system behavior including safety system characteristic is analyzed by system code ATHLET-SC, whereas the local thermal-hydraulic parameters are predicted by the sub-channel code COBRA-SC. Sensitivity analysis are carried out respectively in ATHLET-SC and COBRA-SC code, to identify the appropriate models for description of the flow blockage phenomenon in the test loop. Some measures to mitigate the accident consequence are also trialed to demonstrate their effectiveness. The results indicate that the new developed code has good feasibility to transient analysis of supercritical water-cooled test. And the peak cladding temperature caused by blockage in the fuel assembly can be reduced effectively by the safety measures of SCWR-FQT. (author)

SCWR Concept in Russia

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-08-15

An increase in the efficiency of NPPs with light-water reactors through ‘nuclear’ steam superheating was one of the problems solved in the field of nuclear power industry. The commissioning of the Beloyarsk NPP, Units 1&2 with the channel-type reactor in the sixties of the 20th century showed the potential of realization of this idea and the necessity to solve a series of problems in technology and materials science. The NPP operation experience, elaboration and operational experience of steam superheating channels are extremely important in choosing the ways of design development of Generation IV reactors with supercritical pressure coolant water. The first technical proposal on a supercritical water cooled reactor of vessel type made in Russia in 1986 was the design of a two-circuit reactor plant (RP). The concept of the two-circuit RP of integrated type VVER-SCP-I with electric power of 500 MW was proposed in 1990. The design activities on these projects were performed at OKB GIDROPRESS and the analyses were carried out at the RRC Kurchatov Institute. The State Science Center of the Russian Federation Institute of Physics and Power Engineering (SSC RF IPPE) has been performing the computational studies of a single-circuit RP VVER-SCP since 2001. In 2006 OKB GIDROPRESS launched the design effort and computational analyses to corroborate the design of a single loop RP.

Rural Latino youth park use: characteristics, park amenities, and physical activity.

Science.gov (United States)

Perry, Cynthia K; Saelens, Brain E; Thompson, Beti

2011-06-01

Less than half of youth engage in sufficient physical activity to achieve health benefits. Key environmental factors of park and recreation spaces may influence youth physical activity. We sought to ascertain youth characteristics and behaviors that attract youth to parks with specific amenities and encourage physical activity while at the parks in a rural, predominantly Latino community. We examined the quality of amenities in the 13 parks and recreation spaces that middle school aged youth have access to in their community using the Environmental Assessment of Parks and Recreation Spaces (EAPRS) tool. Middle school students completed surveys in the school classroom (n = 1,102) regarding park use, physical activity, and intrapersonal characteristics (e.g., motivators). We used logistic regression to identify correlates of any park use, use of higher quality field and court parks, and active and sedentary park use. Younger age, participation in an after school activity, and identification of a team as a motivator were positively associated with any park use. Use of higher quality court and field parks was associated with participation in an after school activity and being Latino. The odds of being active in the parks were greater for boys and Latinos. Older age and alcohol use are correlated with being sedentary at the park, while odds of being sedentary at the park were lower for boys and youth who met physical activity guidelines. Organized team activities may encourage active use of higher quality fields and courts parks by Latino youth; thereby, increasing their level of physical activity.

Physical, chemical and texture characteristics of Aro cheese

Directory of Open Access Journals (Sweden)

González, M.L.

2017-10-01

Full Text Available In 2016, Mexico’s total annual production of cheese was 375,181 tons. Cheese is widely consumed among all socioeconomic groups, and the decision to purchase this product is based on income, with a wide variety of cheeses, brands, and styles available. The fresco cheese is the most popular type and is mostly produced according to traditional or artisanal methods in small family businesses, and small and medium-sized enterprises. It is made with the milk of the producers' livestock, giving it an added value. In Mexico, however, there is not enough scientific information related to the characterization of various dairy products of artisanal production, for example, Aro cheese. The aim of the present study was to define the physical, chemical, and rheological characteristics of the Aro cheese that is commercialized in Teotitlán de Flores Magón, Oaxaca, Mexico. Twenty-four samples of Aro cheese were collected in four establishments with high sales in Teotitlán de Flores Magón, Oaxaca, for analysis physical (Diameter, weight, height and color, chemical (pH, acidity, aw, chlorides, moisture, ashes, protein and fat, and texture (hardness, springiness, adhesiveness and cohesiveness. No difference was found in weight, diameter, height, and color (L* and b*. However, differences in hardness and cohesiveness were found. Although Aro cheese is characterized as an enzymatically coagulated cheese, pH values of 5.82 to 6.08 were recorded, and the data relating to moisture, protein, fat, and chlorides are similar to other Mexican fresh cheeses. The cheese of Aro that is commercialized in Teotitlán de Flores Magón, presents similar physical, chemical and texture characteristics to other fresh cheeses of artisanal production.

Physical activity and health characteristics : a survey among Dutch elderly women and men

NARCIS (Netherlands)

Hombergh, van den C.E.J.

1995-01-01

To study physical activity of elderly people and its relationship with health characteristics, a cross-sectional study was conducted in 1991/1992 in Arnhem, the Netherlands, among 515 women and 497 men, aged 65 to 85 years. Habitual physical activity was assessed with a questionnaire,

Maternal risk factors predicting child physical characteristics and dysmorphology in fetal alcohol syndrome and partial fetal alcohol syndrome.

Science.gov (United States)

May, Philip A; Tabachnick, Barbara G; Gossage, J Phillip; Kalberg, Wendy O; Marais, Anna-Susan; Robinson, Luther K; Manning, Melanie; Buckley, David; Hoyme, H Eugene

2011-12-01

Previous research in South Africa revealed very high rates of fetal alcohol syndrome (FAS), of 46-89 per 1000 among young children. Maternal and child data from studies in this community summarize the multiple predictors of FAS and partial fetal alcohol syndrome (PFAS). Sequential regression was employed to examine influences on child physical characteristics and dysmorphology from four categories of maternal traits: physical, demographic, childbearing, and drinking. Then, a structural equation model (SEM) was constructed to predict influences on child physical characteristics. Individual sequential regressions revealed that maternal drinking measures were the most powerful predictors of a child's physical anomalies (R² = .30, p < .001), followed by maternal demographics (R² = .24, p < .001), maternal physical characteristics (R²=.15, p < .001), and childbearing variables (R² = .06, p < .001). The SEM utilized both individual variables and the four composite categories of maternal traits to predict a set of child physical characteristics, including a total dysmorphology score. As predicted, drinking behavior is a relatively strong predictor of child physical characteristics (β = 0.61, p < .001), even when all other maternal risk variables are included; higher levels of drinking predict child physical anomalies. Overall, the SEM model explains 62% of the variance in child physical anomalies. As expected, drinking variables explain the most variance. But this highly controlled estimation of multiple effects also reveals a significant contribution played by maternal demographics and, to a lesser degree, maternal physical and childbearing variables. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

THE MORPHOBATHYMETRIC FEATURES OF THE CUCIULAT LAKES (SĂLAJ COUNTY AND THEIR WATERS’ PHYSICAL CHARACTERISTICS

Directory of Open Access Journals (Sweden)

Csaba HORVATH

2010-12-01

Full Text Available The lake units analyzed in this study are located in the Purcăreţ-Boiu Mare plateau, specifically in the formerly Cuciulat quarry (Salaj County. To the origin of the two lake basins, have contributed mostly anthropogenic factors and to a smaller extent natural ones. The lakes formed next to the quarry are significantly influenced by the spoil bank: this can be seen in the lakes’ form, in their bathymetry and also in some of their physical characteristics. The identification of the lakes’ morphobathymetric features and of the waters’ physical characteristics relied on measurements taken in the summer of 2009 (August 17. In the field, we used a Hannah HI 9828 multiparameter instrument to measure the waters’ physical characteristics and a GPS to pinpoint the measurements’ position. Also for the depth measurements, because they are shallow lakes, besides the GPS, we used a Seechi disk. To capture the best possible spatial variation of the mentioned characteristics, we used interpolation as modeling method.

Probabilistic analysis of strength and thermal-physic WWER fuel rod characteristics using START-3 code

International Nuclear Information System (INIS)

Medvedev, A.; Bogatyr, S.; Khramtsov; Sokolov, F.

2001-01-01

During the last years probabilistic methods for evaluation of the influence of the fuel geometry and technology parameters on fuel operational reliability are widely used. In the present work the START-3 procedure is used to calculate the thermal physics and strength characteristics of WWER fuel rods behavior. The procedure is based on the Monte-Carlo method with the application of Sobol quasi-random sequences. This technique allows to treat the fuel rod technological and operating parameters as well as its strength and thermal physics characteristics as random variables. The work deals with a series of WWER-1000 fuel rod statistical tests and verification based on the PIE results. Also preliminary calculations are implemented with the aim to determine the design schema parameters. This should ensure the accuracy of the assessment of the parameters of WWER fuel rod characteristics distribution. The probability characteristics of fuel rod strength and thermal physics are assessed via the statistical analysis of the results of probability calculations

Physical, chemical and sensory characteristics of red guava (Psidium guajava) velva at different fruit ripening time

Science.gov (United States)

Ishartani, D.; Rahman, F. L. F.; Hartanto, R.; Utami, R.; Khasanah, L. U.

2018-01-01

This study purposed to determine the effect of red guava fruit ripening time on the physical (overrun and melting rate), chemical (vitamin C, pH, total dissolved solid) and sensory (color, taste, aroma, texture, and overall compare to control (without ripening) velva) characteristic of red guava velva. Red guava fruits were harvested at 90 days after flowering, ripened and then processed into velva. This research used Completely Randomized Design with fruit ripening time (without ripening, 4 days, and 6 days) as single factor. The research was conducted in triplicate. Chemical and physical characteristic data was analysed using One Way Analysis of Varian whether sensory characteristic data was analyzed using Independent Sample T-test. The result showed that fruit ripening time significantly affected the physical, chemical and sensory characteristic of the velva. Vitamin C, pH, and total solid of the velva were increased as the ripening time prolonged. In other hand, increasing of fruit ripening time decreased the overrun and melting rate of the velva. Red guava velva made from 6 days ripening had better sensory characteristics compared to velva made from red guava fruit without ripening or 4 day ripening. This research conclude that 6 days ripening time gives better chemical, physical and sensory characteristics of the velva compare to 4 days ripening time. Red guava fruits ripened for 6 days were recommended as raw material in velva making.

Physical and ionic characteristics in water soluble fraction (WSF) of ...

African Journals Online (AJOL)

The values of ionic and physical characteristics at 25, 50 and 100% water soluble fraction (WSF) of Olomoro well-head crude oil before and after exposure to Azolla africana were investigated. The WSF values before and after exposure to the plants showed that more ions were available after the introduction of the test plant.

INDIVIDUAL CHARACTERISTICS OF THE STUDENTS ENROLLED IN DIFFERENT TYPES OF MOTOR ACTIVITY OF PHYSICAL EDUCATION

Directory of Open Access Journals (Sweden)

E. M. Revenko

2017-01-01

Full Text Available The aim of this study was to examine intensity of motor and intellectual abilities and motivation for physical activity of students engaged in physical education in different sports groups.Methodology and research methods. Motor abilities of the students were assessed by measuring: hand, strength endurance, speed-power abilities, speed ability and general stamina. Assessment of general intelligence (GI was carried out by R. Amthauer’s test in the adaptation of L. A. Yasjukova. Formal-dynamic characteristics of the individuality (FDCI were studied using the technique of FDCI feedback form proposed by V. M. Rusalov. Assessment of motivation to implement motor activity was performed using the author's questionnaire. The method of statistical information processing has allowed the author to reveal correlation communications between motor abilities and GI of first-year students.Results. Significant differences in the manifestation of the individual students’ characteristics choosing practicing in different types of physical activity are experimentally established. In particular, students who chose table tennis, are inferior to the students who went in for wrestling in the manifestation of certain (power, motor skills, motivation for physical activity, but at the same time show relatively higher rates of certain intellectual abilities.Formal-dynamic traits of individuality are peculiar to students involved in table tennis, reflecting lower psychomotor activity (integrated indicator PDI - Psychomotor Development Index, in comparison with students who prefer fighting. The material presented provides a basis to argue that sports-oriented approach has some potential in the aspect of increase of efficiency of students’ physical education, distinguished by individual characteristics of age specific development.Scientific novelty. Scientific findings on distinct differences in motivation to physical activity, manifestation of motor and mental

Revamping of entisol soil physical characteristics with compost treatment

Science.gov (United States)

Sumono; Loka, S. P.; Nasution, D. L. S.

2018-02-01

Physical characteristic of Entisol soil is an important factor for the growth of plant. The aim of this research was to know the effect of compost application on physical characteristics of Entisol soil. The research method used was experimental method with 6 (six) treatments and 3 replications of which K1 = 10 kg Entisol soil without compost, K2 = 9 Kg Entisol soil with 1 kg compost, K3 = 8 kg Entisol soil with 2 kg compost, K4 = 7 kg Entisol soilwith3 kg compost, K5 = 6 kg Entisol soil with 4 kg compost and K6 = 5 kg Entisol soil with 5 kg compost. The observed parameters were soil texture, soil organic matter, soil thickness, porosity, soil pore size, soil permeability and water availability. The results showed that the Entisol soil texture was loamy sand texture, the value of soil organic matter ranged from 0.74% to 4.69%, soil thickness ranged from 13.83 to 20.16 cm, porosity ranged from16% to 37%, soil pore size ranged from 2.859 to 5.493 µm, permeability ranged from 1.24 to 5.64 cm/hour and water availability ranged from 6.67% to 9.12% by each treatment.

Physical characteristics of anti-scatter grids according to old and new JIS Standards

International Nuclear Information System (INIS)

Ishikawa, Mitsuo; Ide, Toshinori; Miyake, Hiroyuki; Kamishima, Yuki; Negishi, Toru

2004-01-01

Japan Industrial Standard (JIS) Z 4910 (anti-scatter grids) of the JIS standards was revised in 2000. Major points of revision were the provision of general-purpose and mammographic anti-scatter grids and changes in the diameter of the measuring field and difference in the manufacturing allowance. We measured the physical characteristics (grid selectivity, contrast improvement ratio, and grid exposure factor) of [general-purpose anti-scatter grids] referring to the methods of measurement [JIS Z 4910:2000] and [JIS Z 4910:1983] using an inverter-type high-voltage generator. Physical characteristics indicated a lower value for [JIS Z 4910:2000] than for [JIS Z 4910:1983]. [JIS Z 4910:2000] was able to measure primary radiation and scattered radiation more accurately than [JIS Z 4910:1983] because of the diameter of the measuring field and the measurement arrangement. Moreover, the physical characteristic values were influenced by radiation quality, e.g., differences in high-voltage generators. In the method of measuring stipulated by JIS, strict conditions regarding the arrangement of the measurement tools and the stability and other factors of the power output of the X-ray generator are provided for the type approval test conducted by the manufacturer. (author)

Life cycle assessment of hydrogen and power production by supercritical water reforming of glycerol

International Nuclear Information System (INIS)

Galera, S.; Gutiérrez Ortiz, F.J.

2015-01-01

Highlights: • The environmental performance of the supercritical water reforming (SCWR) of glycerol was assessed. • Biogenic CO 2 emissions allowed quantifying a realistic GHG inventory of 3.8 kg CO 2 -eq/kg H 2 . • The environmental profile of SCWR process was compared to those of other technologies. • A good environmental performance of H 2 and power production by SCWR of glycerol was obtained. - Abstract: The environmental performance of hydrogen and electricity production by supercritical water reforming (SCWR) of glycerol was evaluated following a Life Cycle Assessment (LCA) approach. The heat-integrated process was designed to be energy self-sufficient. Mass and energy balances needed for the study were performed using Aspen Plus 8.4, and the environmental assessment was carried out through SimaPro 8.0. CML 2000 was selected as the life cycle impact assessment method, considering as impact categories the global warming, ozone layer depletion, abiotic depletion, photochemical oxidant formation, eutrophication, acidification, and cumulative energy demand. A distinction between biogenic and fossil CO 2 emissions was done to quantify a more realistic GHG inventory of 3.77 kg CO 2 -eq per kg H 2 produced. Additionally, the environmental profile of SCWR process was compared to other H 2 production technologies such as steam methane reforming, carbon gasification, water electrolysis and dark fermentation among others. This way, it is shown that SCWR of glycerol allows reducing greenhouse gas emissions and obtaining a favorable positive life cycle energy balance, achieving a good environmental performance of H 2 and power production by SCWR of glycerol

A Conceptual Supercritical Water Cooled Reactor Design Using a Cruciform Solid Moderator

Energy Technology Data Exchange (ETDEWEB)

Joo, Hyung Kook; Bae, Kang Mok; Yoo, Jae Woon; Lee, Hyun Chul; Noh, Jae Man; Bae, Yoon Yong

2006-01-15

A Super Critical Water-Cooled Reactor(SCWR) concept proposed by Gen-IV has an advantage of a high thermal efficiency. However, there are some difficulties in neutronic core design for a SCWR due to lower moderator density resulting from the high operating temperature over the pseudo-critical temperature. In this report, the design concepts for the fuel assembly and the core for a SCWR were described as a feasibility study on the SCWR core design. HELIOS lattice code which will be used for group constants generation was verified for the application to the low coolant density condition of a SCWR. The TAF module for a thermal hydraulic feedback in MASTER was modified to consider high pressure and temperature of the supercritical coolant with single-phase fluid. A cruciform ZrH{sub 2} solid moderator was proposed for the SCWR fuel assembly design to compensate the lower coolant density. The axial zoning concept with three different enrichments for a fuel rod was used for the axial power shape control. Gadolinia burnable poison rods were used to reduce excess reactivity. Control rod system was grouped into 6 banks to control the excess reactivity of the core during normal operation. An orifice concept for each assembly was applied to control a coolant flow rate individually. As a result of the neutronic analysis for the equilibrium SCWR core, the maximum linear heat generation rete limit was satisfied and the maximum coolant temperature of the core outlet was {approx}590 .deg. C which is lower than 620 .deg. C of the maximum clad temperature limit.

Numerical investigation of supercritical water-cooled nuclear reactor in horizontal rod bundles

Energy Technology Data Exchange (ETDEWEB)

Shang Zhi, E-mail: shangzhi@tsinghua.org.c [Faculty of Engineering, Kingston University, London SW15 3DW (United Kingdom); Science and Technology Facilities Council, Daresbury Laboratory, Warrington WA4 4AD (United Kingdom); Lo, Simon, E-mail: simon.lo@uk.cd-adapco.co [CD-adapco, Trident House, Basil Hill Road, Didcot OX11 7HJ (United Kingdom)

2010-04-15

The commercial CFD code STAR-CD v4.02 is used as a numerical simulation tool for flows in the supercritical water-cooled nuclear reactor (SCWR). The basic heat transfer element in the reactor core can be considered as round rods and rod bundles. Reactors with vertical or horizontal flow in the core can be found. In vertically oriented core, symmetric characters of flow and heat transfer can be found and two-dimensional analyses are often performed. However, in horizontally oriented core the flow and heat transfer are fully three-dimensional due to the buoyancy effect. In this paper, horizontal rods and rod bundles at SCWR conditions are studied. Special STAR-CD subroutines were developed by the authors to correctly represent the dramatic change in physical properties of the supercritical water with temperature. In the rod bundle simulations, it is found that the geometry and orientation of the rod bundle have strong effects on the wall temperature distributions and heat transfers. In one orientation the square bundle has a higher wall temperature difference than other bundles. However, when the bundles are rotated by 90 deg. the highest wall temperature difference is found in the hexagon bundle. Similar analysis could be useful in design and safety studies to obtain optimum fuel rod arrangement in a SCWR.

[Correlation between physical characteristics of sticks and quality of traditional Chinese medicine pills prepared by plastic molded method].

Science.gov (United States)

Wang, Ling; Xian, Jiechen; Hong, Yanlong; Lin, Xiao; Feng, Yi

2012-05-01

To quantify the physical characteristics of sticks of traditional Chinese medicine (TCM) honeyed pills prepared by the plastic molded method and the correlation of adhesiveness and plasticity-related parameters of sticks and quality of pills, in order to find major parameters and the appropriate range impacting pill quality. Sticks were detected by texture analyzer for their physical characteristic parameters such as hardness and compression action, and pills were observed by visual evaluation for their quality. The correlation of both data was determined by the stepwise discriminant analysis. Stick physical characteristic parameter l(CD) can exactly depict the adhesiveness, with the discriminant equation of Y0 - Y1 = 6.415 - 41.594l(CD). When Y0 Y1, pills were adhesive with each other. Pills' physical characteristic parameters l(CD) and l(AC), Ar, Tr can exactly depict smoothness of pills, with the discriminant equation of Z0 - Z1 = -195.318 + 78.79l(AC) - 3 258. 982Ar + 3437.935Tr. When Z0 Z1, pills were rough on surface. The stepwise discriminant analysis is made to show the obvious correlation between key physical characteristic parameters l(CD) and l(AC), Ar, Tr of sticks and appearance quality of pills, defining the molding process for preparing pills by the plastic molded and qualifying ranges of key physical characteristic parameters characterizing intermediate sticks, in order to provide theoretical basis for prescription screening and technical parameter adjustment for pills.

Supercritical water-cooled reactor fuel management and economic comparison and analysis

International Nuclear Information System (INIS)

Cai Guangming; Ruan Liangcheng; Liu Xuechun

2014-01-01

The supercritical water-cooled reactor (SCWR) is expected to have an excellent fuel economical efficiency because of its high thermal efficiency. This article compares CSR1OOO with the current mainstream PWR and ABWR on the aspect of the economical efficiency of fuel management, and finally makes an unexpected conclusion that the SCWR has worse fuel economy than others. And it remains to be deliberated whether the SCWR will be the fourth generation of nuclear system. (authors)

Study on Reactor Physics Characteristic of the PWR Core Using UO2

International Nuclear Information System (INIS)

Tukiran Surbakti

2009-01-01

Study on reactor physics characteristic of the PWR core using UO 2 fuel it is necessary to be done to know the characteristic of geometry, condition and configuration of pin cell in the fuel assembly Because the geometry, configuration and condition of the pin cell in fuel core determine the loading strategy of in-core fuel management Calculation of k e ff is a part of the neutronic core parameter calculation to know the reactor physics characteristic. Generally, core calculation is done using computer code starts from modelling one unit fuel lattice cell, fuel assembly, reflector, irradiation facility and until core reactor. In this research, the modelling of pin cell and fuel assembly of the PWR 17 ×17 is done homogeneously. Calculation of the k-eff is done with variation of the fuel volume fraction, fuel pin diameter, fuel enrichment. The calculation is using by NITAWL and CENTRM, and then the results will be compared to KENOVI code. The result showed that the value of k e ff for pin cell and fuel assembly PWR 17 ×17 is not different significantly with homogenous and heterogenous models. The results for fuel volume fraction of 0.5; rod pitch 1.26 cm and fuel pin diameter of 9.6 mm is critical with burn up of 35,0 GWd/t. The modeling and calculation method accurately is needed to calculation the core physic parameter, but sometimes, it is needed along time to calculate one model. (author)

Physical and textural characteristics of fermented milk products obtained by kombucha inoculums with herbal teas

Directory of Open Access Journals (Sweden)

Malbaša Radomir V.

2012-01-01

Full Text Available In this investigation, kombucha fermented milk products were produced from milk with 1.6% milk fat using 10% (v/v kombucha inoculums cultivated on the extracts of peppermint and stinging nettle. The fermentation process was conducted at temperatures of 37, 40 and 43°C. Fermentation was stopped when the pH value of 4.5 was reached. The fermentation process was shortened with an increase of temperature. Physical characteristics of the fermented products were determined by using standard methods of analysis. Textural characteristics were determined by texture profile analysis. The obtained products showed good physical and textural characteristics, typical for the yoghurt-like products. [Projekat Ministarstva nauke Republike Srbije, br. III-46009

Physical Characteristics and Performance of Japanese Top-Level American Football Players.

Science.gov (United States)

Yamashita, Daichi; Asakura, Masaki; Ito, Yoshihiko; Yamada, Shinzo; Yamada, Yosuke

2017-09-01

Yamashita, D, Asakura, M, Ito, Y, Yamada, S, and Yamada, Y. Physical characteristics and performance of Japanese top-level American football players. J Strength Cond Res 31(9): 2455-2461, 2017-This study aimed to compare the physical characteristics and performance between top-level nonprofessional football players in Japan and National Football League (NFL) Combine invited players and between top-level and middle-level players in Japan to determine the factors that enhance performance in international and national competitions. A total of 168 American football players (>20 years) in Japan participated in an anthropometric (height and weight) and physical (vertical jump, long jump, 40-yard dash, pro-agility shuttle, 3-cone drill, and bench press repetition test) measurement program based on the NFL Combine program to compete in the selection of candidates for the Senior World Championship. All players were categorized into 1 of the 3 position groups based on playing position: skill players, big skill players, and linemen. Japanese players were additionally categorized into selected and nonselected players for the second tryout. The NFL Combine candidates had significantly better performance than selected Japanese players on all variables except on performance related to quickness among the 3 position groups. Compared with nonselected players, selected Japanese skill players had better performance in the 40-yard dash and bench press test and big skill players had better performance in the vertical jump, broad jump, and 40-yard dash. Selected and nonselected Japanese linemen were not different in any measurements. These results showed the challenges in American football in Japan, which include not only improving physical performance of top-level players, but also increasing the number of football players with good physical performance.

Neighbourhood built environment characteristics associated with different types of physical activity in Canadian adults.

Science.gov (United States)

McCormack, Gavin R

2017-06-01

The aim of this study was to estimate the associations between neighbourhood built environment characteristics and transportation walking (TW), recreational walking (RW), and moderate-intensity (MPA) and vigorous-intensity physical activity (VPA) in adults independent of sociodemographic characteristics and residential self-selection (i.e. the reasons related to physical activity associated with a person's choice of neighbourhood). In 2007 and 2008, 4423 Calgary adults completed land-based telephone interviews capturing physical activity, sociodemographic characteristics and reasons for residential self-selection. Using spatial data, we estimated population density, proportion of green space, path/cycleway length, business density, bus stop density, city-managed tree density, sidewalk length, park type mix and recreational destination mix within a 1.6 km street network distance from the participants' geolocated residential postal code. Generalized linear models estimated the associations between neighbourhood built environment characteristics and weekly neighbourhood-based physical activity participation (≥ 10 minutes/week; odds ratios [ORs]) and, among those who reported participation, duration of activity (unstandardized beta coefficients [B]). The sample included more women (59.7%) than men (40.3%) and the mean (standard deviation) age was 47.1 (15.6) years. TW participation was associated with intersection (OR = 1.11; 95% CI: 1.03 to 1.20) and business (OR = 1.52; 1.29 to 1.78) density, and sidewalk length (OR = 1.19; 1.09 to 1.29), while TW minutes was associated with business (B = 19.24 minutes/week; 11.28 to 27.20) and tree (B = 6.51; 2.29 to 10.72 minutes/week) density, and recreational destination mix (B = -8.88 minutes/ week; -12.49 to -5.28). RW participation was associated with path/cycleway length (OR = 1.17; 1.05 to 1.31). MPA participation was associated with recreational destination mix (OR = 1.09; 1.01 to 1.17) and sidewalk length (OR = 1.10; 1

A study of automotive workers anthropometric physical characteristics from Mexico Northwest.

Science.gov (United States)

Lucero-Duarte, Karla; de la Vega-Bustillos, Enrique; López-Millán, Francisco

2012-01-01

Due to the lack of anthropometric information in northwest Mexico, we did an anthropometric study that represents the population physical characteristics and that is reliable for the design or redesign of workstations. The study was divided in two phases. The first one was the anthropometric study of 2900 automotive industry workers in northwest of Mexico. The study includes 40 body dimensions of 2345 males and 555 females personalized to be used in future researches. Second phase includes compared anthropometric characteristics of population reported in four Mexican studies and a Colombian study against the current study. Benefits of this project are: a reliable database of anthropometric characteristic of automotive industry population for workstations design or redesign that match with the users, increase product quality and reduce economic, medical and union complains.

Physical properties, evaporation and combustion characteristics of nanofluid-type fuels

OpenAIRE

Tanvir, Saad

2016-01-01

Nanofluids are liquids with stable suspension of nanoparticles. Limited studies in the past have shown that both energetic and catalytic nanoparticles once mixed with traditional liquid fuels can be advantageous in combustion applications, e.g., increased energy density and shortened ignition delay. Contradictions in existing literature, scarcity of experimental data and lack of understanding on how the added nanoparticles affect the physical properties as well as combustion characteristics o...

The relationship of exercise to anovulatory cycles in female athletes: hormonal and physical characteristics.

Science.gov (United States)

Russell, J B; Mitchell, D; Musey, P I; Collins, D C

1984-04-01

The objective of this study was to examine the mechanisms by which physical activity affects the menstrual cycle. Women with high, medium, and low levels of physical activity were compared for menstrual function, physical characteristics, and urinary and serum levels of luteinizing hormone, follicle-stimulating hormone, prolactin, estradiol-17 beta, and 2-hydroxyestrone. None of the physical characteristics other than age and muscle area were significantly different in the three groups. The percentage of body fat did not appear to be a factor in the amenorrhea induced by strenuous exercise, as the percent of body fat in all three groups was less than 22%. The group of athletes under strenuous exercise which correlated with oligomenorrhea had decreased serum levels of luteinizing hormone, prolactin, and estradiol-17 beta but elevated levels of 2-hydroxyestrone. These data suggest that anovulatory cycles are correlated with the amount of exercise and increased levels of catechol estrogens. Catecholamines and beta-endorphin elevated by exercise may interact to suppress luteinizing hormone release at the hypothalamic pituitary axis.

Physical-chemical characteristics of whitening toothpaste and evaluation of its effects on enamel roughness

Directory of Open Access Journals (Sweden)

Sérgio Paulo Hilgenberg

2011-08-01

Full Text Available This in vitro study evaluated the physical-chemical characteristics of whitening toothpastes and their effect on bovine enamel after application of a bleaching agent (16% carbamide peroxide. Physical-chemical analysis was made considering mass loss by desiccation, ash content and pH of the toothpastes. Thirty bovine dental enamel fragments were prepared for roughness measurements. The samples were subjected to bleaching treatments and simulated brushing: G1. Sorriso Dentes Brancos (Conventional toothpaste, G2. Close-UP Whitening (Whitening toothpaste, and G3. Sensodyne Branqueador (Whitening toothpaste. The average roughness (Ra was evaluated prior to the bleaching treatment and after brushing. The results revealed differences in the physical-chemical characteristics of the toothpastes (p < 0.0001. The final Ra had higher values (p < 0.05 following the procedures. The mean of the Ra did not show significant differences, considering toothpaste groups and bleaching treatment. Interaction (toothpaste and bleaching treatment showed significant difference (p < 0.0001. The whitening toothpastes showed differences in their physical-chemical properties. All toothpastes promoted changes to the enamel surface, probably by the use of a bleaching agent.

Effects of Cardio-Pilates Exercise Program on Physical Characteristics of Females

Science.gov (United States)

Sevimli, Dilek; Sanri, Murat

2017-01-01

Aim: This study aims to investigate the effects of four weeks cardio-Pilates exercise program on physical characteristics in females. Material and methods: The total 40 female participants were tested before and after four weeks regular exercise of 3 × 1 hr. sessions/week. Body height and weight, waist and hip circumferences, body fat percent and…

An Overview of Promising Grades of Tool Materials Based on the Analysis of their Physical-Mechanical Characteristics

Science.gov (United States)

Kudryashov, E. A.; Smirnov, I. M.; Grishin, D. V.; Khizhnyak, N. A.

2018-06-01

The work is aimed at selecting a promising grade of a tool material, whose physical-mechanical characteristics would allow using it for processing the surfaces of discontinuous parts in the presence of shock loads. An analysis of the physical-mechanical characteristics of most common tool materials is performed and the data on a possible provision of the metal-working processes with promising composite grades are presented.

Socioeconomic inequalities in physical and mental functioning of Japanese civil servants: explanations from work and family characteristics.

Science.gov (United States)

Sekine, Michikazu; Chandola, Tarani; Martikainen, Pekka; Marmot, Michael; Kagamimori, Sadanobu

2006-07-01

Poor physical and mental functioning is more common among people of low socioeconomic status (SES) and those with disadvantaged work and family characteristics. This study aims to clarify whether the SES inequalities in functioning can be explained by the SES differences in work and family characteristics. The subjects were 3787 male and female civil servants, aged 20-65, working in a local government on the west coast of Japan. Logistic regression analysis was performed to examine (1) whether there were employment-grade (SES) differences in poor physical and mental functioning as measured by the Short Form 36 (SF-36) and (2) whether these SES differences were explained by work and family characteristics. In general, low control at work, high demands, low social support, short and long work hours, shift work, being unmarried, high family-to-work conflict and high work-to-family conflict were independently associated with poor physical and mental functioning in both men and women. In men, the age-adjusted odds ratio (OR) of low-grade employees for poor physical functioning was 1.93 (95% confidence interval: 1.38-2.69) in comparison to high-grade employees. The grade difference was mildly attenuated, when adjusted for work and family characteristics (OR = 1.72)(1.20-2.47). The age-adjusted OR of the low-grade employees for poor mental functioning was 1.88 (1.29-2.74). The grade difference was attenuated and no longer significant when adjusted for work and family characteristics (OR = 1.51)(0.99-2.31). Among women, there were no significant grade-differences in poor physical and mental functioning. Although longitudinal research is necessary to clarify the causal nature of these associations, improvements in SES differences in work and family characteristics may be important for reducing SES inequalities in physical and mental functioning among Japanese men. The different patterns of SES inequalities in health between men and women deserve further research.

Neighbourhood built environment characteristics associated with different types of physical activity in Canadian adults

Directory of Open Access Journals (Sweden)

Gavin R. McCormack

2017-06-01

Full Text Available Introduction: The aim of this study was to estimate the associations between neighbourhood built environment characteristics and transportation walking (TW, recreational walking (RW, and moderate-intensity (MPA and vigorous-intensity physical activity (VPA in adults independent of sociodemographic characteristics and residential self-selection (i.e. the reasons related to physical activity associated with a person’s choice of neighbourhood. Methods: In 2007 and 2008, 4423 Calgary adults completed land-based telephone interviews capturing physical activity, sociodemographic characteristics and reasons for residential self-selection. Using spatial data, we estimated population density, proportion of green space, path/cycleway length, business density, bus stop density, city-managed tree density, sidewalk length, park type mix and recreational destination mix within a 1.6 km street network distance from the participants’ geolocated residential postal code. Generalized linear models estimated the associations between neighbourhood built environment characteristics and weekly neighbourhood-based physical activity participation (≥ 10 minutes/week; odds ratios [ORs] and, among those who reported participation, duration of activity (unstandardized beta coefficients [B]. Results: The sample included more women (59.7% than men (40.3% and the mean (standard deviation age was 47.1 (15.6 years. TW participation was associated with intersection (OR = 1.11; 95% CI: 1.03 to 1.20 and business (OR = 1.52; 1.29 to 1.78 density, and sidewalk length (OR = 1.19; 1.09 to 1.29, while TW minutes was associated with business (B = 19.24 minutes/week; 11.28 to 27.20 and tree (B = 6.51; 2.29 to 10.72 minutes/week density, and recreational destination mix (B = −8.88 minutes/week; −12.49 to −5.28. RW participation was associated with path/cycleway length (OR = 1.17; 1.05 to 1.31. MPA participation was associated with recreational destination mix (OR = 1.09; 1

Is a perceived supportive physical environment important for self-reported leisure time physical activity among socioeconomically disadvantaged women with poor psychosocial characteristics? An observational study.

Science.gov (United States)

Cleland, Verity J; Ball, Kylie; Crawford, David

2013-03-27

Over the past decade, studies and public health interventions that target the physical environment as an avenue for promoting physical activity have increased in number. While it appears that a supportive physical environment has a role to play in promoting physical activity, social-ecological models emphasise the importance of considering other multiple levels of influence on behaviour, including individual (e.g. self-efficacy, intentions, enjoyment) and social (e.g. social support, access to childcare) factors (psychosocial factors). However, not everyone has these physical activity-promoting psychosocial characteristics; it remains unclear what contribution the environment makes to physical activity among these groups. This study aimed to examine the association between the perceived physical environment and self-reported leisure-time physical activity (LTPA) among women living in socioeconomically disadvantaged areas demonstrating different psychosocial characteristics. In 2007-8, 3765 women (18-45 years) randomly selected from low socioeconomic areas in Victoria, Australia, self-reported LTPA, and individual, social and physical environmental factors hypothesised within a social-ecological framework to influence LTPA. Psychosocial and environment scores were created. Associations between environment scores and categories of LTPA (overall and stratified by thirds of perceived environment scores) were examined using generalised ordered logistic regression. Women with medium and high perceived environment scores had 20-38% and 44-70% greater odds respectively of achieving higher levels of LTPA than women with low environment scores. When stratified by thirds of psychosocial factor scores, these associations were largely attenuated and mostly became non-significant. However, women with the lowest psychosocial scores but medium or high environment scores had 76% and 58% higher odds respectively of achieving ≥120 minutes/week (vs. <120 minutes/week) LTPA

Repeatability, correlation and path analysis of physical and chemical characteristics of peach fruits

Directory of Open Access Journals (Sweden)

Rosana Gonçalves Pires Matias

2014-12-01

Full Text Available This study aimed to determine the number of measurements necessary to evaluate physical and chemical characteristics of peach fruits, study the relationships between them and their direct and indirect effects on the content of ascorbic acid and total carotenoids. The characteristics skin and pulp color, fruit weight, suture, equatorial and polar diameters, firmness, soluble solids (SS, titratable acidity (TA, SS/TA ratio, ascorbic acid and total carotenoids were evaluated in 39 cultivars of peach and 3 cultivars of nectarine from the orchard of the Universidade Federal de Viçosa. The repeatability coefficient was estimated by ANOVA and CPCOR. Phenotypic correlation coefficients (rf were estimated and, after the multicollinearity diagnostics, they were unfolded to direct and indirect effects of the explanatory variables on the response variable using path analysis. There was agreement on the magnitude of repeatability coefficients obtained by the two methods; however, they varied among the 14 characteristics. The highest correlations were found between FW, SD, ED and PD. Seven fruits are sufficient to evaluate the physical and chemical characteristics of peach with a correlation coefficient of 90%. The characteristics considered in the path diagrams (b* skin, hº skin, b* pulp, hº pulp, ED, PD, FIR, SS, SS/AT and TC are not the main determinants of the ascorbic acid. The yellow hue of the pulp (hº pulp has the potential to be used in indirect selection for total carotenoids.

Exploring Relationships: Teacher Characteristics and Student Learning in Physical Science

Science.gov (United States)

Close, Eleanor; Vokos, S.; Seeley, L.

2006-12-01

The Department of Physics and the School of Education at Seattle Pacific University, together with FACET Innovations, LLC, are beginning the second year of a five-year NSF TPC grant, Improving the Effectiveness of Teacher Diagnostic Skills and Tools. We are working in partnership with school districts in Washington State to identify and characterize widespread productive and unproductive modes of reasoning employed by both pre-college students and teachers on foundational topics in physical science. In the first year of the grant, base-line preand post-test data were collected from a large number (N 2300) of middle and high school students. We will discuss relationships between preand post-test results, student learning gains, and student and teacher characteristics. * Supported in part by NSF grant #ESI-0455796, The Boeing Corporation, and the SPU Science Initiative.

Heat Transfer Characteristics for an Upward Flowing Supercritical Pressure CO2 in a Vertical Annulus Passage

International Nuclear Information System (INIS)

Kang, Deog Ji; Kim, Sin; Kim, Hwan Yeol; Bae, Yoon Yeong

2007-01-01

Heat transfer experiments at a vertical annulus passage were carried out in the SPHINX(Supercritical Pressure Heat Transfer Investigation for NeXt Generation) to investigate the heat transfer behaviors of supercritical CO 2 . The collected test data are to be used for the reactor core design of the SCWR (SuperCritical Water-cooled Reactor). The mass flux was in the range of 400 ∼1200 kg/m 2 s and the heat flux was chosen up to 150 kW/m 2 . The selected pressures were 7.75 and 8.12 MPa. The heat transfer data were analyzed and compared with the previous tube test data. The test results showed that the heat transfer characteristics were similar to those of the tube in case of a normal heat transfer mode and degree of heat transfer deterioration became smaller than that in the tube. Comparison of the experimental heat transfer coefficients with the predicted ones by the existing correlations showed that there was not a distinct difference between the correlations

Physical characteristics of stream subbasins in the Pomme de Terre River Basin, west-central Minnesota

Science.gov (United States)

Lorenz, D.L.; Payne, G.A.

1994-01-01

Data describing the physical characteristics of stream subbasins upstream from selected points on streams in the Pomme de Terre River Basin, located in west-central Minnesota, are presented in this report. The physical characteristics are the drainage area of the subbasin, the percentage area of the subbasin covered only by lakes, the percentage area of the subbasin covered by both lakes and wetlands, the main-channel length, and the main-channel slope. The points on the stream include outlets of subbasins of at least 5 square miles, outfalls of sewage treatment plants, and locations of U.S. Geological Survey low-flow, high-flow, and continuous-record gaging stations.

Effects of Gamma Irradiation on Antioxidant, Antimicrobial Activities and Physical Characteristics of Sargassum thunbergii Extract

International Nuclear Information System (INIS)

Lee, S.J.; Song, E.J.; Lee, S.Y.

2010-01-01

This study was carried out to determine the effect of gamma irradiation (3-20 kGy) on the antioxidant, antimicrobial activities and physical characteristics of Sargassum thunbergii (ST) extracts. When ST powder was treated by gamma irradiation, the yields and total phenolic compounds (TPC) of water extracts were increased, but radical scavenging activities were not changed. When ST extract was irradiated, the TPC and DPPH radical scavenging activities were increased. In addition, gamma irradiation of ST extract decreased viscosity and removed color. These results suggest that gamma irradiation would be a useful method for improving the physical characteristics of ST extract while maintaining native biological activities

Which psychological, social and physical environmental characteristics predict changes in physical activity and sedentary behaviors during early retirement? A longitudinal study

Directory of Open Access Journals (Sweden)

Delfien Van Dyck

2017-05-01

Full Text Available Background In the context of healthy ageing, it is necessary to identify opportunities to implement health interventions in order to develop an active lifestyle with sufficient physical activity and limited sedentary time in middle-aged and older adults. The transition to retirement is such an opportunity, as individuals tend to establish new routines at the start of retirement. Before health interventions can be developed, the psychological, social and physical environmental determinants of physical activity and sedentary behaviors during early retirement should be identified, ideally with longitudinal studies. The aim of this paper was first to examine whether psychological, social and physical environmental factors at the start of retirement predict longitudinal changes in physical activity and sedentary behaviors during the first years of retirement. Second, moderating effects of gender and educational levels were examined. Methods This longitudinal study was conducted in Flanders, Belgium. In total, 180 recently retired (>1 month, <2 years at baseline adults completed a postal questionnaire twice (in 2012–2013 and two years later in 2014–2015. The validated questionnaire assessed socio-demographic information, physical activity, sedentary behaviors, and psychological, social and physical environmental characteristics. Multiple moderated hierarchic regression analyses were conducted in SPSS 22.0. Results Higher perceived residential density (p < 0.001 and lower aesthetics (p = 0.08 predicted an increase in active transportation (adjusted R2 = 0.18. Higher baseline self-efficacy was associated with an increase in leisure-time physical activity (p = 0.001, adjusted R2 = 0.13. A more positive perception of old age (p = 0.04 and perceiving less street connectivity (p = 0.001 were associated with an increase in screen time (adjusted R2 = 0.06. Finally, higher baseline levels of modeling from friends (p = 0.06 and lower

Non-ionizing radiations : physical characteristics, biological effects and health hazard assessment

International Nuclear Information System (INIS)

Repacholi, M.H.

1988-01-01

The Workshop was a project of the International Non-Ionizing Radiation Committee of IRPA and comprised a series of educational lectures and demonstrations intended to give a comprehensive overview of non-ionizing electromagnetic radiation: physical characteristics, sources of concern, levels of exposure, mechanisms of interaction and reported effects of these fields and radiations with biological tissues, human studies, health risk assessment, national and international standards and guidelines, and protective measures

Fish assemblage relationships with physical characteristics and presence of dams in three eastern Iowa rivers

Science.gov (United States)

Pierce, Clay; Nicholas L. Ahrens,; Anna K. Loan-Wilsey,; Gregory A. Simmons,; Gregory T. Gelwicks,

2013-01-01

Fish assemblages in rivers of the Midwestern United States are an important component of the region's natural resources and biodiversity. We characterized the physical environment and presence of dams in a series of reaches in three eastern Iowa rivers tributary to the Mississippi River and related these characteristics to the fish assemblages present. Some physical characteristics were similar among the 12 study reaches, whereas others differed substantially. We found a total of 68 species across the 12 study reaches; 56 in the Turkey River, 51 in the Maquoketa River and 50 in the Wapsipinicon River. Seventeen species could be described as ‘downstream-distributed’; 15 being found only in the lowest reach of one or more rivers and the other two being found only in the lowest reaches or two or more contiguous reaches including the lowest reach. Two species could be described as ‘upstream-distributed’, being found only in an uppermost reach. Non-metric multidimensional scaling ordination illustrated similarities among reaches, and five physical variables were significantly correlated with assemblage similarities. Catchment area and number of dams between reaches and the Mississippi River were strongly correlated with assemblage similarities, but the directions of their effects were opposite. Catchment area and number of dams were confounded. The collective evidence to date suggests that the pervasiveness of dams on rivers significantly alters fish assemblages, making underlying patterns of species change and relationships with naturally varying and human-influenced physical characteristics along a river's course difficult to discern.

Blood donors’ physical characteristics are associated with pre- and post-donation symptoms - Donor InSight

Science.gov (United States)

van den Hurk, Katja; Peffer, Karlijn; Habets, Karin; Atsma, Femke; Pasker-de Jong, Pieternel C.M.; van Noord, Paulus A.H.; Veldhuizen, Ingrid J.T.; de Kort, Wim L.A.M.

2017-01-01

Background Observational data suggest that some donors might benefit from donating while others may be harmed. The aim of this study was to investigate the prevalence and potential, routinely measured, determinants of pre- and post-donation symptoms. Materials and methods In Donor InSight, questionnaire data from 23,064 whole blood donors (53% female) were linked to routinely measured data on donors’ physical characteristics (haemoglobin, blood pressure, body mass index and estimated blood volume) from the Dutch donor database. Absolute and relative associations between donors’ physical donor and the presence of pre- and post-donation symptoms were studied using multivariable logistic regression. Results Pre-donation symptoms (lack of energy, headaches) were reported by 3% of men and 3% of women. Five percent of men and 4% of women reported positive post-donation symptoms (feeling fit, fewer headaches). Negative symptoms (fatigue, dizziness) were more common, occurring in 8% of men and 19% of women. All the studied donors’ physical characteristics were positively associated with pre- and positive post-donation symptoms and negatively associated with negative symptoms. Body mass index was most consistently and independently associated with symptoms. Discussion Donors’ physical characteristics, in particular body mass index, were consistently associated with pre- and post-donation symptoms. This indicates that subgroups of donors more and less tolerant to donation might be identifiable using routinely measured data. Further research is warranted to study underlying mechanisms and potential strategies to predict and prevent donor reactions. PMID:27416579

Heat Transfer Characteristics for an Upward Flowing Supercritical Pressure CO{sub 2} in a Vertical Annulus Passage

Energy Technology Data Exchange (ETDEWEB)

Kang, Deog Ji; Kim, Sin [Cheju National Univ., Cheju (Korea, Republic of); Kim, Hwan Yeol; Bae, Yoon Yeong [KAERI, Daejeon (Korea, Republic of)

2007-07-01

Heat transfer experiments at a vertical annulus passage were carried out in the SPHINX(Supercritical Pressure Heat Transfer Investigation for NeXt Generation) to investigate the heat transfer behaviors of supercritical CO{sub 2}. The collected test data are to be used for the reactor core design of the SCWR (SuperCritical Water-cooled Reactor). The mass flux was in the range of 400 {approx}1200 kg/m{sup 2}s and the heat flux was chosen up to 150 kW/m{sup 2}. The selected pressures were 7.75 and 8.12 MPa. The heat transfer data were analyzed and compared with the previous tube test data. The test results showed that the heat transfer characteristics were similar to those of the tube in case of a normal heat transfer mode and degree of heat transfer deterioration became smaller than that in the tube. Comparison of the experimental heat transfer coefficients with the predicted ones by the existing correlations showed that there was not a distinct difference between the correlations.

Physical characteristic and irritation index of Syzigium aromaticum essential oil in O/W and W/O creams

Science.gov (United States)

Safriani, R.; Sugihartini, N.; Yuliani, S.

2017-11-01

Essential oil of Syzigium aromaticum has been formulated in O/W and W/O creams as anti-inflammatory dosage form. The purpose of this study was to evaluate the physical characteristic and irritation index of S. aromaticum essential oil in O/W and W/O creams. The creams were made by fusion method. The creams then were evaluated the physical characteristic including pH, viscosity, spreadability and adhesivity. The irritation index was obtained by irritation skin test in male rabbit. The results showed that the W/O and O/W creams have the value of pH: 6.3 and 6.27; spreadability: 3,18 and 4.17 cm2; adhesivity: 5.59 and 0.07 minutes; viscosity: 4.43 and 2.88 Pa.S, respectively. The irritation test showed that the control enhancer caused mild irritation in both of W/O and O/W creams. These findings indicated that type of cream might influence the physical characteristic and irritation index of S. aromaticum essential oil cream.

Handwriting Characteristics among Secondary Students with and without Physical Disabilities: A Study with a Computerized Tool

Science.gov (United States)

Li-Tsang, Cecilia W. P.; Au, Ricky K. C.; Chan, Michelle H. Y.; Chan, Lily W. L.; Lau, Gloria M. T.; Lo, T. K.; Leung, Howard W. H.

2011-01-01

The purpose of the present study was to investigate the handwriting characteristics of secondary school students with and without physical disabilities (PD). With the use of a computerized Chinese Handwriting Assessment Tool (CHAT), it was made possible to objectively assess and analyze in detail the handwriting characteristics of individual…

Retorting conditions affect palatability and physical characteristics of canned cat food.

Science.gov (United States)

Hagen-Plantinga, Esther A; Orlanes, Denmark F; Bosch, Guido; Hendriks, Wouter H; van der Poel, Antonius F B

2017-01-01

The effects of different temperature and time conditions during retorting of canned cat food on physicochemical characteristics and palatability were examined. For this purpose, lacquer cans containing an unprocessed loaf-type commercial cat food were heated in a pressurised retorting system at three specified temperature-time profiles (113°C/232 min, 120°C/103 min and 127°C/60 min) to equal a similar lethality ( F 0 value = 30). Physicochemical properties (viscosity, texture, particle size, pH) were determined, and a 10 d three-bowl palatability test was performed with ten European shorthair cats. Retorting at 113°C/232 min resulted in differences in all the physical parameters examined ( particle size). Significant pH differences were observed (6·53, 6·63 and 6·66 for T113/232, 120 and 127°C, respectively). Preference ratios were 0·38, 0·31 and 0·31 for T113/232, 120 and 127°C, respectively ( P  = 0·067). It can be concluded that different retorting temperature-time profiles with equal F 0 value significantly affect physical characteristics and tended to affect palatability of moist cat food.

The effect of morphological characteristics on the physical and physiological performance of Turkish soccer referees and assistant referees

Directory of Open Access Journals (Sweden)

Bozdoğan Tuba Kızılet

2017-01-01

Full Text Available Physical fitness and physiological status play an important role in the referees’ performance. Therefore, the aim of this study was to analyze the body structure and morphological characteristics of Turkish Ssccer refereesand assistant referees and to determine the effect of these variables on physical performance. A sample of 158 male referees and 55 asisstant referees (mean age 31.8 ± 4.2 and 37.4 ± 3.3 yearswas evaluated. Physical assesment were conducted using the Yo-Yo Intermittent Recovery Test Level 1 (YYIRTL1 and Repeated Sprint Ability (RSA for referees and Active Recovery Intermittent Endurance Test (ARIET and the RSA for assistant referees. We analyzed heart rate assesments. The measures used to assess morphological characteristics were age, weight, body mass index (BMI, body fat (BF, body mass, and fat free mass.The ANOVA test (Tukey testwas used to determine the result. Correlations between the referees’ fitness test performance and their morphological characteristics were examined using Pearson’s correlation (p<0.05. To result of this study, point to the existence of a strong correlation between morphological and physical and physiological characteristics. According to the literature, we found that greater BF and a higher BMI may negatively affect areferee’s running performance.

Utilization of the national Portland cement for immobilizing radioactive wastes - Physical characteristics

International Nuclear Information System (INIS)

Rzyski, B.M.; Suarez, A.A.

1988-01-01

This paper shows the results obtained in the study of the national Portland cement, P320, as matrix for radioactive nitric waste incorporation. Cement use practice in other countries is common for this purposes and demonstrates to be cheap and accessible when low and medium level wastes are immobilized. Some of physical characteristics as: homogeneity,mechanical strenght, setting and porosity are analysed due to water-cement ratio and salt contents. Those characteristics which are proper of the final product, must be controlled in such way to assure a long time integrity of the wasteform. The establishment of process and quality control criteria are based in such kind of data. (author) [pt

Assessment of spatial and physical neighborhood characteristics that influence sound quality and herewith well-being and health.

NARCIS (Netherlands)

Devilee, Jeroen; Kempen, Elise van; Swart, Wim; Kamp, Irene van; Ameling, Caroline

2018-01-01

Environmental noise and health studies seldom address the positive effect of environments with high acoustic quality. Sound quality, in turn, is influenced by a large number of factors, including the spatial-physical characteristics of a neighborhood. In general, these characteristics cannot be

Physical and temporal characteristics of under 19, under 21 and senior male beach volleyball players.

Science.gov (United States)

Medeiros, Alexandre; Marcelino, Rui; Mesquita, Isabel; Palao, José Manuel

2014-09-01

This study aimed to assess the effects of age groups and players' role (blocker vs. defender specialist) in beach volleyball in relation to physical and temporal variables, considering quality of opposition. 1101 rallies from Under 19 (U19), 933 rallies from Under 21 (U21), and 1480 rallies from senior (senior) (Men's Swatch World Championships, 2010-2011) were observed using video match analysis. Cluster analysis was used to set teams' competitive levels and establish quality of opposition as "balanced", "moderate balanced" and "unbalanced" games. The analyzed variables were: temporal (duration of set, total rest time, total work time, duration of rallies, rest time between rallies) and physical (number of jumps and number of hits done by defenders and blockers) characteristics. A one-way ANOVA, independent samples t-test and multinomial logistic regression were performed to analyze the variables studied. The analysis of temporal and physical characteristics showed differences considering age group, player's role and quality of opposition. The duration of set, total rest time, and number of jumps done by defenders significantly increased from the U19 to senior category. Multinomial logistic regression showed that in: a) balanced games, rest time between rallies was higher in seniors than in U19 or U21; number of jumps done by defenders was higher in seniors than in U19) and U21; b) moderate balanced games, number of jumps done by defenders was higher in seniors than in U21 and number of jumps done by blockers was smaller in U19 than U21 or seniors; c) unbalanced games, no significant findings were shown. This study suggests differences in players' performances according to age group and players' role in different qualities of opposition. The article provides reference values that can be useful to guide training and create scenarios that resemble a competition, taking into account physical and temporal characteristics. Key PointsPlayer roles, quality of opposition

Designing the organizational creativity based on job characteristics and job involvement among physical education units’ employees of Technology University

Directory of Open Access Journals (Sweden)

Seyed Hossein Alavi

2017-10-01

Full Text Available The aim of the present study was designing the organizational creativity based on job characteristics and job involvement among physical education employees of Technology University. The statistical population of the present study consisted of all employees, experts, and physical education units’ managers. The statistical samples were 389 people reduced to 338 employees after eliminating the incomplete and useless questionnaires. The research method of the present study was descriptive-correlative. Three questionnaires of job characteristics, job involvement, and organizational creativity were used to evaluate the research variables which were distributed and gathered among research samples after translation and comparison with research samples via face validity (views of 12 sport management experts and construct validity. The research results were analyzed by Partial Least Square (PLS and showed that the best predictor of job involvement among physical education units’ employees of Technology University was problem solving (ES= 0.41. However, the job characteristics of autonomy (0.26 and job feedback (.024 had more effects on employees’ creativity. Other results showed that managers reported lower scores of job characteristics and creativity than sport employees. According to research findings, in order to achieve creativity in the workplace within physical education units of Technology University, the managers should stimulate the autonomy and feedback characteristics. Of course, it should not be neglected that this mechanism would be facilitated by creating the problem solving in job.

Physiological and physical characteristics of elite dragon boat paddlers.

Science.gov (United States)

Ho, Sarah R; Smith, Richard M; Chapman, Philip G; Sinclair, Peter J; Funato, Kazuo

2013-01-01

The objectives of this study were to profile the physiological and physical characteristics of elite dragon boat paddlers, to identify characteristics that predict race performance and to quantify the metabolic energy contributions to simulated 200-m and 500-m dragon boat racing. Eleven, national level, male, Japanese dragon boat paddlers completed a battery of tests on a paddling ergometer including an incremental maximal aerobic capacity test, a 2-minute maximal accumulated oxygen deficit (MAOD) test, and simulated 200-m and 500-m races. A physiological and physical profile of subjects was compiled. Results showed that 200-m race performance correlated with flexed arm girth and excess postexercise oxygen consumption (EPOC) measured in the 30 minutes after the MAOD test, whereas 500-m race performance correlated with body fat percentage, relaxed and flexed arm girth, MAOD, EPOC, and peak power during the MAOD test. Stepwise multiple regression revealed that flexed arm girth was the most powerful predictor of 200-m and 500-m race performance, followed by EPOC with the combination of these 2 factors able to explain 74% and 68% of the variance in 200-m and 500-m race performance, respectively. Aerobic energy contributions for 200-m (50 seconds) and 500-m (1 minute 50 seconds) races were (mean (95% confidence intervals)) 52.1% (range, 47.4-56.8%) and 67.5% (range, 60.1-77.8%), respectively. In conclusion, coaches should develop training programs targeted at developing upper-body musculature and increasing anaerobic capacity because these factors are the strongest predictors of 200-m and 500-m race performance. Given the substantial aerobic energy contributions even for a 200-m race event, coaches should aim to increase the maximal aerobic capacity of the paddler in preparation for both 200-m and 500-m events.

Physical characteristics of some wheat genotypes cultivated in Lake District of Turkey

Directory of Open Access Journals (Sweden)

Hülya GÜL

2012-12-01

Full Text Available This study was carried out to determine the physical characteristics of wheat genotypes cultivated in lakes district of Turkey. The genotypes were collected from the center of Isparta and Burdur province, districts and selected five different villages in this district at harvest in 2011. Totaly 19 genotypes named as; Hard Wheat, Red Kazmalı Wheat, Lavanta, Red Wheat, Burgaz, Osmaniye and Yunak (Landraces, Kızıltan-91, İzmir 85, Bezostoya, Ankara 98, Sönmez 2001, Çeşit-1252, Hatay 86, Mirzabey, Kunduru-1149, Gerek-79, Gediz-75 and Cumhuriyet-75 (Wheat registered cultivars were collected from these districts. Physical characteristics of the wheat samples brought to laboratory were analyzed as completely randomized design with three replications. Foreign matters of wheats were determined according to TS 2974 standards. 4 genotypes were found at second degree, 5 genotypes were at third degree and remaining 10 genotypes were found out of these rating. Highest thousand kernel weight and hectoliter weight were determined on Mirzabey and Sönmez 2001 respectively in bread wheat varieties while highest thousand kernel weight and hectoliter weight were determeined on Kunduru 1149 and Burgaz respectively in durum wheat varieties.

Historical Delineation of Landscape Units Using Physical Geographic Characteristics and Land Use/Cover Change

Science.gov (United States)

Campos-Campos, Oswaldo; Cruz-Cárdenas, Gustavo; Aquino, Roque Juan Carrasco; Moncayo-Estrada, Rodrigo; Machuca, Martha Alicia Velázquez; Meléndez, Luis Arturo Ávila

2018-03-01

Landscape units are conceived as a part of the territory that share similar physical and geographic characteristics. Their delineation can contribute to identify the physical and social dynamics that emerge in the spatial environment and to propose strategies of planning and management of the territory. The main objective was to make a historical delineation of landscape units in the Duero river basin that demonstrate the dynamics of changes in the territory, the description of the actors involved, and the affectations in the natural and social environment. We analyzed the vegetation change and urban growth from 1983 to 2014, incorporating climatic, edaphic, and topographic variables. A Principal Component Analysis was performed with the information and results were used in Maximum Likelihood procedure to define different clusters based on environmental characteristics. We defined five categories from the Landsat images. Results showed landscape units with homogeneous environmental characteristics and some differences in the units' delineation were mainly influenced by political and socioeconomic factors. Temporally there was an increased tendency of landscape units, three in 1983, nine in 1990, 1995, 2000 and 2011, and eight in 2014. This increase resulted from territory fragmentation because of berries and avocado cultivars expansion over wooded area.

Physical and dispersive optical characteristics of ZrON/Si thin-film system

Energy Technology Data Exchange (ETDEWEB)

Wong, Yew Hoong [University of Malaya, Centre of Advanced Materials, Department of Mechanical Engineering, Faculty of Engineering, Kuala Lumpur (Malaysia); University of Malaya, Centre of Advanced Manufacturing and Material Processing, Kuala Lumpur (Malaysia); Atuchin, V.V. [Institute of Semiconductor Physics, SB RAS, Laboratory of Optical Materials and Structures, Novosibirsk (Russian Federation); Kruchinin, V.N. [Institute of Semiconductor Physics, SB RAS, Laboratory for Ellipsometry of Semiconductor Materials and Structures, Novosibirsk (Russian Federation); Cheong, Kuan Yew [Universiti Sains Malaysia, Electronic Materials Research Group, School of Materials and Mineral Resources Engineering, Engineering Campus, Seberang Perai Selatan, Penang (Malaysia)

2014-06-15

To date, the complex evaluation of physical and dispersive optical characteristics of the ZrON/Si film system has yet been reported. Hence, ZrON thin films have been formed on Si(100) substrates through oxidation/nitridation of sputtered metallic Zr in N{sub 2}O environment at 500, 700, and 900 C. Physical properties of the deposited films have been characterized by X-ray diffractometry (XRD), Fourier transform infrared (FTIR) spectroscopy, reflection high-energy electron diffraction (RHEED), and spectroscopic ellipsometry (SE). It has been shown that ZrON/Si thin films without optical absorption can be prepared by oxidation/nitridation reaction in N{sub 2}O environment at 700-900 C. (orig.)

Student characteristics and learning environment interactions in mathematics and physics education: a resource perspective

NARCIS (Netherlands)

Brekelmans, M.; van den Eeden, P.; Terwel, J.; Wubbels, Th.

1997-01-01

In two studies, one on secondary mathematics education, the other on secondary physics education, data were collected on students' cognitive achievement and characteristics of students and their learning environment. In this chapter the findings of the two studies are brought together in secondary

Profiling in basketball: physical and physiological characteristics of elite players.

Science.gov (United States)

Ostojic, Sergej M; Mazic, Sanja; Dikic, Nenad

2006-11-01

The purpose of this study was to describe structural and functional characteristics of elite Serbian basketball players and to evaluate whether players in different positional roles have different physical and physiological profiles. Five men's basketball teams participated in the study and competed in the professional First National League. Physiological measurements were taken of 60 players during the final week of their preparatory training for competition. According to positional roles, players were categorized as guards (n = 20), forwards (n = 20), and centers (n = 20). Guards were older (p Vertical jump power was significantly higher in centers (p basketball.

Evaluation of spacer grid spring characteristics by means of physical tests and numerical simulation

Energy Technology Data Exchange (ETDEWEB)

Schettino, Carlos Frederico Mattos, E-mail: carlosschettino@inb.gov.br [Industrias Nucleares do Brasil (INB), Resende, RJ (Brazil)

2017-11-01

Among all fuel assemblies' components, the spacer grids play an important structural role during the energy generation process, mainly due for its primary functional requirement, that is, to provide fuel rod support. The present work aims to evaluate the spring characteristics of a specific spacer grid design used in a PWR fuel assembly type 16 x 16. These spring characteristics comprises the load versus deflection capability and its spring rate, which are very important, and also mandatory, to be correctly established in order to preclude spacer grid spring and fuel rod cladding fretting during operation, as well as prevent an excessive fuel rod buckling. This study includes physical tests and numerical simulation. The tests were performed on an adapted load cell mechanical device, using as a specimen a single strap of the spacer grid. Three numerical models were prepared using the Finite Element Method, with the support of the commercial code ANSYS. One model was built to validate the simulation according to the performed physical test, the others were built inserting a gradient of temperature (Beginning Of Life hot condition) and to evaluate the spacer grid spring characteristics in End Of Life condition. The obtained results from physical test and numerical model have shown a good agreement between them, therefore validating the simulation. The obtained results from numerical models make available information regarding the spacer grid design purpose, such as the behavior of the fuel rod cladding support during operation. Therewith, these evaluations could be useful to improve the spacer grid design. (author)

Evaluation of spacer grid spring characteristics by means of physical tests and numerical simulation

International Nuclear Information System (INIS)

Schettino, Carlos Frederico Mattos

2017-01-01

Among all fuel assemblies' components, the spacer grids play an important structural role during the energy generation process, mainly due for its primary functional requirement, that is, to provide fuel rod support. The present work aims to evaluate the spring characteristics of a specific spacer grid design used in a PWR fuel assembly type 16 x 16. These spring characteristics comprises the load versus deflection capability and its spring rate, which are very important, and also mandatory, to be correctly established in order to preclude spacer grid spring and fuel rod cladding fretting during operation, as well as prevent an excessive fuel rod buckling. This study includes physical tests and numerical simulation. The tests were performed on an adapted load cell mechanical device, using as a specimen a single strap of the spacer grid. Three numerical models were prepared using the Finite Element Method, with the support of the commercial code ANSYS. One model was built to validate the simulation according to the performed physical test, the others were built inserting a gradient of temperature (Beginning Of Life hot condition) and to evaluate the spacer grid spring characteristics in End Of Life condition. The obtained results from physical test and numerical model have shown a good agreement between them, therefore validating the simulation. The obtained results from numerical models make available information regarding the spacer grid design purpose, such as the behavior of the fuel rod cladding support during operation. Therewith, these evaluations could be useful to improve the spacer grid design. (author)

Physical and chemical characteristics of cheese bread, using fermented broken rice

Directory of Open Access Journals (Sweden)

Andressa CORADO

2017-10-01

Full Text Available Abstract Development of new food products, taking as raw material the subproducts obtained during industrial process become an economic and nutritious alternative, since these are usually discarded, caning be a significant nutritional source good. This research aimed to develop cheese bread using fermented broken rice instead of sour starch in four different concentrations (0%, 25%, 50%, 75% and 100%. After the development of formulations, was performed physics and chemicals characterization of products obtained, performing analysis of: proximate composition, dietary fiber, acidity, pH, ºBrix, total soluble sugars, reducing and sucrose. The increased formulations didn’t present significant differences, highlighting the average values of protein 7%, dietary fiber 9% and ash 1.9%. Broken rice, after fermentation process, becomes a profitable alternative instead of the sour starch on cheese breads, saving all the physical and chemical characteristics and being inexpensive.

Soil physical characteristics after EDTA washing and amendment with inorganic and organic additives

International Nuclear Information System (INIS)

Zupanc, Vesna; Kastelec, Damijana; Lestan, Domen; Grcman, Helena

2014-01-01

Soil washing has been established as suitable remediation technology, with most research focused on metal removing efficiency and toxic effect on plants, less on the influence on soil physical characteristics, which was the focus of this study. In soil column experiment highly contaminated soil and soil washed with EDTA, mixed with additives (gypsum, hydrogel, manure, peat) were tested. White clover was used as a soil cover. Yield, metal concentration in soil and plant, aggregate fractionation and stability, saturated hydraulic conductivity and soil water retention of the soil were measured. Soil washing decreased metal concentration in soil and plants, but yield of white clover on remediated soil was significantly lower compared to the original soil. Significant differences in water retention characteristics, aggregate fractionation and stability between original and remediated soil have been determined. Gypsum, hydrogel and peat increased plant available water, manure and peat increased yield on remediated soil. -- Highlights: • Clover yield on washed soil was significantly lower than on original soil. • Organic additives increased yield on remediated soils. • Soil washing changed soil water retention and soil structure. • Hydrogen, gypsum and peat increased plant available water of remediated soil. -- The study critically examines yield, plant metal uptake and possible changes in soil physical characteristics as a consequence of soil washing procedure for metal pollution remediation

Physical and physiological characteristics in male team handball players by playing position - Does age matter?

Science.gov (United States)

Nikolaidis, P T; Ingebrigtsen, J; Póvoas, S C; Moss, S; Torres-Luque, G

2015-04-01

The purpose of this study was to examine the variation in physical and physiological characteristics according to playing position in adolescent and adult male team handball (TH) players. Adolescent (N.=57, aged 14.9±1.4 yr) and adult (N.=39, 26.6±5.7 yr) players were examined for anthropometric characteristics, somatotype and body composition, and performed the physical working capacity test, a force-velocity test, the Wingate anaerobic test (WAnT), sit-and-reach test, handgrip strength test, squat jump (SJ), countermovement vertical jump without (CMJ) and with arm-swing, and a 30-s Bosco test. Eccentric utilization ratio (EUR) was calculated as the ratio CMJ to SJ. In adult players, there were significant differences between wings and the other positions with regard to anthropometric and body composition parameters (body mass, -17.9% to -13.2%; height, -5.3% to -4.3%; and fat-free mass, -13.7% to -9.9%) and anaerobic power assessed by WAnT (peak power, -20.5% to -15.2%; and mean power, -20% to -14.8%); however, these characteristics did not differ significantly in adolescents, in which the only statistically significant difference was found between goalkeepers and the other positions in EUR (+8.1%). Therefore, the differences in physical and physiological characteristics between playing positions are age-dependent. As adult players in this study were taken from players competing in the top Greek league, findings could serve as a base for talent identification and development for future studies. Moreover, knowledge about positional differences might enhance the ability to make tailored position-specific training programs among adult and adolescent players in the future.

Comparison of Conflict Management Strategies of Physical Education Office Managers Based on some Demographic Characteristics

OpenAIRE

Fatemeh Ghorbanalizadeh Ghaziani; Mohsen Moadi; Siavash Khodaparast Sareshkeh

2013-01-01

The purpose of study was comparison of conflict management strategies of physical education office managers based on their some demographic characteristics. All of managers of physical education office of Mazandaran (n = 15) and Guilan (n = 16) province and their assistant [(n = 15) and (n =16) respectively] response to Putnam and Wilson’s “organizational communication conflict instrument (OCCI)”.Analysis showed that Mazandaran’s and Guilan’s managers and their assistant hadn’t differences to...

Oak Ridge Reservation Physical Characteristics and Natural Resources

Energy Technology Data Exchange (ETDEWEB)

Parr, P.D.; Hughes, J.F.

2006-09-19

The topography, geology, hydrology, vegetation, and wildlife of the Oak Ridge Reservation (ORR) provide a complex and intricate array of resources that directly impact land stewardship and use decisions (Fig. 1). The purpose of this document is to consolidate general information regarding the natural resources and physical characteristics of the ORR. The ORR, encompassing 33,114 acres (13,401 ha) of federally owned land and three Department of Energy (DOE) installations, is located in Roane and Anderson Counties in east Tennessee, mostly within the corporate limits of the city of Oak Ridge and southwest of the population center of Oak Ridge. The ORR is bordered on the north and east by the population center of the city of Oak Ridge and on the south and west by the Clinch River/Melton Hill Lake impoundment. All areas of the ORR are relatively pristine when compared with the surrounding region, especially in the Valley and Ridge Physiographic Province (Fig. 2). From the air, the ORR is clearly a large and nearly continuous island of forest within a landscape that is fragmented by urban development and agriculture. Satellite imagery from 2006 was used to develop a land-use/land-cover cover map of the ORR and surrounding lands (Fig. 3). Following the acquisition of the land comprising the ORR in the early 1940s, much of the Reservation served as a buffer for the three primary facilities: the X-10 nuclear research facility (now known as the Oak Ridge National Laboratory [ORNL]), the first uranium enrichment facility or Y-12 (now known as the Y-12 National Security Complex [Y-12 Complex]), and a gaseous diffusion enrichment facility (now known as the East Tennessee Technology Park [ETTP]). Over the past 60 years, this relatively undisturbed area has evolved into a rich and diverse eastern deciduous forest ecosystem of streams and reservoirs, hardwood forests, and extensive upland mixed forests. The combination of a large land area with complex physical characteristics

Chemical kinetics in H2O and D2O under hydrothermal conditions

International Nuclear Information System (INIS)

Ghandi, K.; Alcorn, C.D.; Legate, G.; Percival, P.W.; Brodovitch, J.-C.

2010-01-01

Muonium (Mu = μ + e - ) is a light analogue of the H-atom. Studies of Mu chemical kinetics have been extended to supercritical water, a medium in some designs of future generation nuclear reactors. The Supercritical-Water-Cooled Reactor (SCWR) would operate at higher temperatures than current pressurized water-cooled reactors, and the lack of knowledge of water radiolysis under supercritical conditions constitutes a technology gap for SCWR development. Accurate modeling of chemistry in a SCWR requires data on kinetics of reactions involved in the radiolysis of water. In this paper, we first review our measurements of kinetics in H 2 O and then describe new data for D 2 O under sub- and supercritical conditions. (author)

Sexual Activity and Physical Tenderness in Older Adults: Cross-Sectional Prevalence and Associated Characteristics.

Science.gov (United States)

Freak-Poli, Rosanne; Kirkman, Maggie; De Castro Lima, Gustavo; Direk, Nese; Franco, Oscar H; Tiemeier, Henning

2017-07-01

Despite a common misconception, older adults engage in sexual behavior. However, there is limited sexual behavior research in older adults, which is often restricted to small samples, to cohorts recruiting adults from 45 years old, and to questions regarding only sexual intercourse. To assess the cross-sectional prevalence of and characteristics associated with sexual activity and physical tenderness in community-dwelling older adults. From the Rotterdam Study, sexual activity and physical tenderness were assessed in 2,374 dementia-free, community-dwelling men and women at least 65 years old from 2009 through 2012 in the Netherlands. Analyses were stratified by sex and partner status. Sexual activity and physical tenderness (eg, fondling or kissing) in the last 6 months. Potential associated characteristics included measurements of demographics, socioeconomic position, health behavior, and health status. The vast majority of partnered participants (men, n = 858; women, n = 724) had experienced physical tenderness in the previous 6 months (83.7% of men and 82.9% of women) and nearly half had engaged in sexual activity (49.5% and 40.4% respectively). Very few unpartnered women (n = 675) had engaged in sexual activity (1.3%) or physical tenderness (5.2%), whereas prevalence rates were slightly higher for unpartnered men (n = 117; 13.7% or 17.1%). Engaging in sexual behavior was generally associated with younger age, greater social support, healthier behaviors, and better physical and psychological health. Findings show that older adults engage in sexual activity. It is important not to assume that an older person is not interested in sexual pleasure or that an older person is unhappy with not having a sexual partner. Offering an opportunity for open discussion of sexuality and medical assistance without imposing is a difficult balance. We encourage health care professionals to proactively address sexuality and extend knowledge about safe sex and sexual function

The Organoleptic and Physic Characteristics and Lactic Acid Contents of Yoghurt with Commercial Starter Added Bifidobacteria bifidum

Directory of Open Access Journals (Sweden)

Tatik Khusniati

2012-10-01

Full Text Available Bifidobacteria bifidum is probiotic bacteria which inhibit negative bacteria in human ulcer. Adding B. bifidum in commercial yoghurt starter, may increase yoghurt quality. To know yoghurt quality, organoleptic and physic characteristics and lactic acidcontents of yoghurt with commercial starter added B. bifidum was observed. B. bifidum concentrations added were 1:4, 2:4, 3:4 (v/v. Organoleptic characteristics were conducted by 18 panelists, physics were visually detected and lactic acid contents were by titration method. The results show that accepted yoghurt characteristics were yoghurt with commercial starter added B. bifidum 1:4 (v/v, and fat yoghurt were more acceptable than that skim. The higher B. bifidum concentrations used, the stronger flavours (after expiry date and colours (at and after expiry date of yoghurt, while yoghurt homogenity decreased (at and after expiry date. Fat yoghurt flavours were stronger than that of skim. The higher B. bifidum concentrations and storage times, the higher yoghurt lactic acid contents. Lactic acid contents of fat yoghurt with various starters, were higher than that skim at storage 0-15 days. The fat yoghurt lactic acid contents were 0.99%-1.44%, while that skim were 0.95-1.20%. Based on organoleptic and physic characteristics and lactic acid contents, fat yoghurt were more acceptable that that skim.

Chrome Tanning Leather of Giant Sea Perch Combined with Seed Extract Areca Nut on the Physical Characteristics

Directory of Open Access Journals (Sweden)

Bustami - Ibrahim

2014-11-01

Full Text Available Tanning is the process of converting raw hide protein to leather, which are stable, not easily decompose, and is suitable for a variety of uses. The use of vegetable based tanning materials in the leather tanning process has not been carried out. Vegetable based materials that were used are betel nuts. This plant contains tannin which is the main agent in the process of leather tanning. The aim of this study was to determine the physical characteristics of snapper leather treated with betel nut extract. Soxhlet extracting method with methanol as a solvent were used to obtain tannin from betel nuts. Tanned Snapper Leather were analyzed for physical quality, elongation strength, tensile strength, tear strength, and sewing strength. The result showed that methanol extracted betel nut with 10% concentration gives the optimum physical characteristics.Keywords: areca nut, chrome, snapper, snapper

Physical characteristics of chemically modified starch from potatoes, evaluated by X-ray diffraction, SEM and NMR

International Nuclear Information System (INIS)

Sivolil; Perez, E.

1995-01-01

The aim of this study was to compare the physical characteristics of chemically modified starch by cross-linking and methylation in order to observe the changes occurred in the molecule which could give it a positive and specific application. The physical characteristics were evaluated by morphometric analysis using analytical methods as scanning electron microscopy, x-ray diffraction and nuclear magnetic resonance in solid state. The results point for all the evaluated characteristics that the cross-linked starch from potato maintains a granular size and shape similar to native starch, through some granules were affected since they presented cracks and outlet of internal material; the introduction of phosphate groups in the molecule is evident in the NMR spectra: the methylated starch from potato changed in a drastic way the structure of granules since the size increased from 9 to 53 μm of the native starch to 44 to 181 μm for the methylated, the X-ray spectra shows a formation of crystals, banishing the characteristic standard type B, likewise with NMR a modification of starch was observed due to the presence of methyl groups. (Author)

Historical Delineation of Landscape Units Using Physical Geographic Characteristics and Land Use/Cover Change

Directory of Open Access Journals (Sweden)

Campos-Campos Oswaldo

2018-03-01

Full Text Available Landscape units are conceived as a part of the territory that share similar physical and geographic characteristics. Their delineation can contribute to identify the physical and social dynamics that emerge in the spatial environment and to propose strategies of planning and management of the territory. The main objective was to make a historical delineation of landscape units in the Duero river basin that demonstrate the dynamics of changes in the territory, the description of the actors involved, and the affectations in the natural and social environment. We analyzed the vegetation change and urban growth from 1983 to 2014, incorporating climatic, edaphic, and topographic variables. A Principal Component Analysis was performed with the information and results were used in Maximum Likelihood procedure to define different clusters based on environmental characteristics. We defined five categories from the Landsat images. Results showed landscape units with homogeneous environmental characteristics and some differences in the units’ delineation were mainly influenced by political and socioeconomic factors. Temporally there was an increased tendency of landscape units, three in 1983, nine in 1990, 1995, 2000 and 2011, and eight in 2014. This increase resulted from territory fragmentation because of berries and avocado cultivars expansion over wooded area.

Effect of biomaterials and working pressure of a briquetting machine on physical characteristics and energy consumption of briquette production

Directory of Open Access Journals (Sweden)

Niedziółka Ignacy

2018-01-01

Full Text Available The paper presents an analysis of the influence of biomaterials and working pressure of a briquetting machine on physical characteristics and energy consumption of briquette production. The following types of biomaterials were used in the study: rape, oat and maize straw. Hydraulic piston briquetting machine JUNIOR manufactured by Deta Polska was used for briquetting. During the briquetting process, the working pressures of briquetting machine were 20, 26 and 32 MPa. Depending on the type of biomaterial used and the assumed working pressure of briquetting machine, produced briquettes differed in terms of both their physical characteristics and energy consumption. Based on the analysis of the obtained results, it was found that physical characteristics and energy consumption during briquette production were influenced by such factors as the type of compacted material, its fragmentation as well as granulometric composition and working pressure of the briquetting machine used.

Effects of irradiation on physical and sensory characteristics of cowpea seed cultivars (Vigna unguiculata L. Walp)

International Nuclear Information System (INIS)

Ocloo, F.C.K.; Darfour, B.; Ofosu, D.O.; Wilson, D.D.

2012-01-01

Cowpeas (Vigna unguiculata L. Walp) are leguminous seeds widely produced and consumed in most developing countries of sub-Saharan Africa where they are a good source of affordable proteins, minerals and vitamins to the mainly carbohydrate-based diet of sub-Saharan Africa. At storage cowpea may be attacked by insects that cause severe damage to the seeds. The objective of this study was to investigate the effects of gamma irradiation on some physical and sensory characteristics of cowpea seed cultivars. Four cowpea cultivars were irradiated with gamma radiation at dose levels of 0.25, 0.50, 0.75, 1.0 and 1.5 kGy. Moisture content, thousand grain weight and bulk densities were determined as well as the amount of water absorbed during soaking and some sensory characteristics were equally determined. All the physical parameters studied were not significantly (p>0.05) affected by the radiation. There was no significant (p>0.05) effect of the radiation on the sensory attributes like flavour, taste, texture, softness and colour of the cowpea seeds. Similarly, the radiation did not affect significantly (p>0.05) the acceptability of the treated cowpea cultivars. - Highlights: → We investigated the effects of gamma irradiation on some physical and sensory characteristics of cowpea seed cultivars. → Four cowpea cultivars were irradiated at dose levels of 0.25, 0.50, 0.75, 1.0 and 1.5 kGy. → Physical parameters were not significantly (p>0.05) affected by the radiation. → Sensory attributes considered were not significantly influenced by the radiation doses used.

Effects of irradiation on physical and sensory characteristics of cowpea seed cultivars (Vigna unguiculata L. Walp)

Energy Technology Data Exchange (ETDEWEB)

Ocloo, F.C.K., E-mail: fidelis_ocloo@yahoo.com [Radiation Technology Centre, Biotechnology and Nuclear Agriculture Research Institute, Ghana Atomic Energy Commission. P.O. Box LG 80, Legon (Ghana); Darfour, B.; Ofosu, D.O. [Radiation Technology Centre, Biotechnology and Nuclear Agriculture Research Institute, Ghana Atomic Energy Commission. P.O. Box LG 80, Legon (Ghana); Wilson, D.D. [Department of Zoology, University of Ghana, Legon (Ghana)

2012-01-15

Cowpeas (Vigna unguiculata L. Walp) are leguminous seeds widely produced and consumed in most developing countries of sub-Saharan Africa where they are a good source of affordable proteins, minerals and vitamins to the mainly carbohydrate-based diet of sub-Saharan Africa. At storage cowpea may be attacked by insects that cause severe damage to the seeds. The objective of this study was to investigate the effects of gamma irradiation on some physical and sensory characteristics of cowpea seed cultivars. Four cowpea cultivars were irradiated with gamma radiation at dose levels of 0.25, 0.50, 0.75, 1.0 and 1.5 kGy. Moisture content, thousand grain weight and bulk densities were determined as well as the amount of water absorbed during soaking and some sensory characteristics were equally determined. All the physical parameters studied were not significantly (p>0.05) affected by the radiation. There was no significant (p>0.05) effect of the radiation on the sensory attributes like flavour, taste, texture, softness and colour of the cowpea seeds. Similarly, the radiation did not affect significantly (p>0.05) the acceptability of the treated cowpea cultivars. - Highlights: > We investigated the effects of gamma irradiation on some physical and sensory characteristics of cowpea seed cultivars. > Four cowpea cultivars were irradiated at dose levels of 0.25, 0.50, 0.75, 1.0 and 1.5 kGy. > Physical parameters were not significantly (p>0.05) affected by the radiation. > Sensory attributes considered were not significantly influenced by the radiation doses used.

Sex differences in physical and mental functioning of Japanese civil servants: explanations from work and family characteristics.

Science.gov (United States)

Sekine, Michikazu; Chandola, Tarani; Martikainen, Pekka; Marmot, Michael; Kagamimori, Sadanobu

2010-12-01

Poor physical and mental functioning are more common among women than men and those with disadvantaged work and family characteristics. This study aims to clarify whether sex differences in health functioning can be explained by sex differences in work and family characteristics. The subjects were 3787 civil servants (2525 men and 1262 women), aged 20-65, working in a local government on the west coast of Japan. A questionnaire survey was conducted in January 2003. Low employment grade, high demands, long work hours, shift work, being unmarried, having no young children, high family-to-work conflict and high work-to-family conflict were more common among women than men and were independently associated with poor physical and mental functioning. The age-adjusted odds ratios (ORs) of women for poor health functioning were 1.80 for poor physical functioning and 1.77 for poor mental functioning. When adjusted for employment grade and work characteristics (control, demand, support, work hours, and shift work), the sex differences in health functioning attenuated. When adjusted for family characteristics (family structure and work-family conflicts), the sex differences in health functioning further attenuated and were no longer statistically significant. Sex differences in family characteristics contributed more to sex difference in mental functioning than sex differences in work characteristics. Japan belongs to conservative welfare regimes. In such countries, men are able to concentrate on their work with relative freedom from their family tasks and responsibilities, whereas women feel difficulties in maintaining their work-life balances. Such sex differences in work- and family-related stresses may contribute to sex difference in health. Longitudinal research is necessary to clarify the causal nature of these associations. Copyright © 2010 Elsevier Ltd. All rights reserved.

Carcass physical composition and physic-chemical characteristics of meat from Nellore cattle

Directory of Open Access Journals (Sweden)

Aline Kellermann de Freitas

2016-04-01

Full Text Available Assessment of carcass physical composition and physicochemical characteristics of meat from Nellore males distributed randomly into three treatments: males castrated at 13 months of age at puberty (n=26; castrated at 18 months of age, 15 days before confinement (n=26; and young bulls (n=25. For the evaluation of meat chemical characteristics, we used samples of 12 animals taken at random from each treatment. The experimental design was completely randomized. Animals were slaughtered at 22 months of age after 100 days of confinement. The carcasses of young bulls showed higher contents of muscle (66.46 % and bone (16.03 %, and lower fat content (17.66 %, in relation to that of steers castrated at 13 (62.83,15.28, and 22.11 %, respectively or 18 months (63.99, 15.29, and 21.53%, respectively, which did not differ amongst themselves. The meat of young bulls was darker (3.07 points than the meat from those castrated at 13 months of age (3.43 points, while the meat from those castrated at 18 months displayed an intermediate color (3.29 points, not differing from the others. Young bulls yielded meat with lower content of intramuscular fat (3.18 points and lipids (3.81% in relation to those castrated at 13 (4.58 points and 6.77%, respectively or 18 months (4.52 points and 5.66%, respectively. Protein content was higher (P 0.05 by the age of castration, with young bulls having lower values in relation to the castrated males. Castration of Nellore young bulls in early puberty increases the edible portion of the carcass due to the higher body fat deposit.

Family Socioeconomic Status, Cortisol, and Physical Health in Early Childhood: The Role of Advantageous Neighborhood Characteristics.

Science.gov (United States)

Roubinov, Danielle S; Hagan, Melissa J; Boyce, W Thomas; Adler, Nancy E; Bush, Nicole R

2018-06-01

Children from families with lower socioeconomic status (SES) evidence greater physiological dysregulation and poorer health. Despite recognition of environmental contributors, little is known about the influence of neighborhood characteristics. The present study examined the moderating role of community-level risks and resources on the relation of family SES to children's daily cortisol output and physical health during the kindergarten year. In fall and spring of kindergarten, children's (N = 338) daily total cortisol was measured and parents and teachers rated children's global physical health. Parents reported family SES. Neighborhood characteristics were assessed using the Child Opportunity Index, a population-level tool that evaluates the quality of multiple domains of neighborhood attributes. In fall, children reared in lower SES family environments had higher cortisol when residing in lower quality (lower opportunity) neighborhoods (b = -.097, p family SES and children's cortisol in more advantaged (higher opportunity) neighborhoods (b = -.023, p = .36). Lower family SES was prospectively associated with poorer physical health in spring (controlling for fall health) only among children living in lower opportunity neighborhoods (b = -.250, p = .018) and was unrelated to physical health among children residing in higher opportunity neighborhoods (b = .042, p = .70). Higher opportunity neighborhoods may protect against the negative consequences of low family SES on children's stress physiology and physical health. Public health interventions that bolster neighborhood opportunities may benefit young children reared in socioeconomically disadvantaged family environments.

Project research on nuclear physical and chemical characteristics of actinide nuclides

International Nuclear Information System (INIS)

Yamana, Hajimu; Nakagome, Yoshihiro; Shibata, Seiichi; Fujii, Toshiyuki; Uehara, Akihiro; Shirai, Osamu; Moriyama, Hirotake; Nagai, Takayuki; Yamanaka, Shinsuke; Shinohara, Atsushi; Kurata, Masaki; Myochin, Munetaka; Nakamura, Shoji; Matsuura, Haruaki

2008-01-01

The chemical and nuclear physical characteristics of actinide elements have been investigated using the experimental methods and instruments of this laboratory. This laboratory has a facility in which the transuranium elements (TRU) and the long-lived fission products (LLFP) can be dealt with. The utility of this facility has been expected. The investigation on the actinide elements and its fission products have been carried out as a project research from both view points of science and technology. The research reports during three years (2005-07) are described here. (M.H.)

"The effect of supervised exercise training on psychological characteristics and physical fitness after myocardial infarction "

Directory of Open Access Journals (Sweden)

"Boshtam M

2000-11-01

Full Text Available Regarding the increasing prevalence of cardiovascular disease (CVD especially myocardial infarction (MI, and the insufficiency of information in the field of physical rehabilitation, this study aimed to investigate the effectiveness of a course of physical rehabilitation on the psychological status and physical characteristics f cardiac patients. In this study, the effect of 8 weeks exercise training, 3 sessions of 45 minutes duration per week, on the physical and psychological function of MI patients was evaluated. Eighty patients who were referred to the rehabilitation unit of Isfahan cardiovascular Research Center were randomly divided into two groups of exercise and non-exercise. The data of pre and post exercise course were analyzed with the SPSS software using the two-sample t-test and multiple liner regression. The comparison of the mean changes of functional capacity. Weight, body mass index (BMI, heart rate, and systolic and diastolic blood pressures between exercise and non-exercise groups after 8 weeks showed significant difference for all studied factors (P<0.05. Also, investigating the psychological characteristics such as depression, anxiety and hostility scores indicated a significant change after exercise training (P<0.05. Personality and behavior showed no significant difference. This study suggests the functional has a significant effect on improving the function capacity and psychological behavior in post MI patients.

Anthropometric profile and physical performance characteristic of the Brazilian amputee football (soccer team

Directory of Open Access Journals (Sweden)

Mário A. M. Simim

2013-09-01

Full Text Available Amputee football is a variation of conventional soccer in which athletes with lower limb amputation and one athelete with upper limb amputation (the goalkeeper participate. The objective of this study was to investigate the anthropometric and physical characteristics of amputee football athletes and to verify differences between heart rate peak (HRpeak and equations for predicting maximum heart rate (HRmax. Twelve amputee soccer players from the Brazilian team participated in this study. The body mass, height and body composition were measured. The physical tests used were: the 20 m running test, the T-square test and the Yo Yo intermitent recovery test - level 1 (YYIRT1. The percentage of fat was significantly different between midfielders and defenders. No significant differences were found between positions in the physical tests. The HRpeak was significantly lower than all of HRmax prediction equations tested. We conclude that the indicators of physical performance did not differ significantly between the different tactics roles of players, and that, after intermittent maximum effort, the cardiac response was lower when compared with the investigated HRmax prediction equations.

Effect of Socio-Demographic and Clinical Characteristics on Physical Activity of Pregnant Women at Referral Hospital in Riyadh, KSA

Directory of Open Access Journals (Sweden)

Shaffi Ahamed Shaik

2017-01-01

Full Text Available Objective: The objective of this study was to investigate the effects of socio demographic and clinical characteristics of pregnant women on their physical activity. Methods: An observational quantitative cross sectional design was carried out in the delivery ward and paediatrics clinic of king Khalid University Hospital, Riyadh, Saudi Arabia. The study subjects included all women who had delivered in the last three months, during the study period between 2013- 2014. The sample size was 336. Data collection included socio-demographic variables, pregnancy related variables and the physical activity by using validated pregnancy physical activity questionnaire. Results: The mean (standard deviation total physical activity score of all the study subjects was 197.39(72.1. The physical activity scores are statistically significantly higher in younger women, graduation education level, and among those who were employed. The physical activity scores were statistically significantly higher in women who had normal delivery, did not have any illness and those who had followed the advice to perform physical activity. Conclusion: The levels of physical activity along with their socio demographic and clinical characteristic were assessed among the pregnant women. The study found low pursuance of physical activity during pregnancy. Any kind of illness suffered during pregnancy further reduced the physical activity levels. It was only the young and educated pregnant women who held onto regular physical activity as advised during their pregnancy.

Physical and functional characteristics of extrudates prepared from fenugreek and oats

Directory of Open Access Journals (Sweden)

Sajad Ahmad Wani

2016-12-01

Full Text Available This study was conducted to investigate the effect of fenugreek seed powder (FSP and oat flour (OF on the physical and functional properties of extruded snack product such as bulk density (BD, hardness (HD, lateral expansion (LE, water absorption index (WAI and water solubility index (WSI using response surface methodology. All the properties were found to be significantly (p < 0.05 affected by proportion of FSP and OF. Results indicated that with the increase in the FSP content, an increase in the values of BD, HD, WAI and WSI was noticed, whereas negative effect of FSP on LE was observed. Results showed negative effect of OF on HD and WSI and an increased effect on BD, LE and WAI of the extruded product. Numerical optimization results showed that a mixture of 2% FSP and 6% OF had higher preference levels for parameters of physical and functional characteristics and could be extruded to produce acceptable quality extrudates.

Comparison of caribou physical characteristics from Yukon and neighboring caribou herds

Directory of Open Access Journals (Sweden)

David A. Gauthier

1986-06-01

Full Text Available Data on seven external body measurements of caribou from six woodland and two barren-ground caribou herds from Yukon, Alaska, Alberta and British Columbia were compared. Comparisons between females in the fall and winter and mature males in the fall revealed that (1 barren-ground Porcupine caribou were consistently smaller than caribou from other herds, (2 British Columbia and Alberta caribou tended to be larger than Yukon caribou, or the Alaskan caribou studied, (3 central Yukon caribou were intermediate in body size, (4 no difference was found between Yukon «mountain» and «woodland» type caribou in body size, and (5 the barren-ground Fortymile caribou were more similar in physical characteristics to Yukon woodland or mountain caribou than to those of the barren-ground Porcupine herd. These data support Banfield's (1961 view of a gradient of decreasing physical size from the northern British Columbia — Alberta herds through the Yukon mountain or woodland herds to the northern barren-ground herds.

Chemical and physical characteristics of phosphate rock materials of varying reactivity

International Nuclear Information System (INIS)

Syers, J.K.; Currie, L.D.

1986-01-01

Several chemical and physical properties of 10 phosphate rock (PR) materials of varying reactivity were evaluated. The highest concentrations of As and Cd were noted. Because Cd and U can accumulate in biological systems, it may be necessary to direct more attention towards the likely implications of Cd and U concentrations when evaluating a PR for direct application. Three sequential extractions with 2% citric acid may be more useful for comparing the chemical solubility of PR materials, particularly for those containing appreciable CaC0 3 . The poor relationship obtained between surface area and the solubility of the PR materials suggests that surface area plays a secondary role to chemical reactivity in controlling the solubility of a PR in a chemical extractant. A Promesh plot provided an effective method for describing the particle-size characteristics of those PR materials which occurred as sands. Fundamental characteristics, such as mean particle size and uniformity, can readily be determined from a Promesh plot. (author)

Chemical kinetics in H{sub 2}O and D{sub 2}O under hydrothermal conditions

Energy Technology Data Exchange (ETDEWEB)

Ghandi, K.; Alcorn, C.D.; Legate, G. [Mount Allison Univ., Sackville, New Brunswick (Canada); Percival, P.W.; Brodovitch, J.-C. [Simon Fraser Univ., Burnaby, British Columbia (Canada)

2010-07-01

Muonium (Mu = μ{sup +}e{sup -}) is a light analogue of the H-atom. Studies of Mu chemical kinetics have been extended to supercritical water, a medium in some designs of future generation nuclear reactors. The Supercritical-Water-Cooled Reactor (SCWR) would operate at higher temperatures than current pressurized water-cooled reactors, and the lack of knowledge of water radiolysis under supercritical conditions constitutes a technology gap for SCWR development. Accurate modeling of chemistry in a SCWR requires data on kinetics of reactions involved in the radiolysis of water. In this paper, we first review our measurements of kinetics in H{sub 2}O and then describe new data for D{sub 2}O under sub- and supercritical conditions. (author)

The Social, Physical and Temporal Characteristics of Primary School Dining Halls and Their Implications for Children's Eating Behaviours

Science.gov (United States)

Moore, Sue N.; Murphy, Simon; Tapper, Katy; Moore, Laurence

2010-01-01

Purpose: Social, physical and temporal characteristics are known to influence the eating experience and the effectiveness of nutritional policies. As the school meal service features prominently in UK nutritional and health promotion policy, the paper's aim is to investigate the characteristics of the primary school dining context and their…

Variations in adolescents' motivational characteristics across gender and physical activity patterns: A latent class analysis approach.

Science.gov (United States)

Lawler, Margaret; Heary, Caroline; Nixon, Elizabeth

2017-08-17

Neglecting to take account of the underlying context or type of physical activity (PA) that underpins overall involvement has resulted in a limited understanding of adolescents' PA participation. The purpose of the present research was to identify male and female adolescents' leisure time PA patterns and examine whether psychological processes derived from self-determination theory differ as a function of the pattern of PA undertaken. Nine hundred ninety-five students (61.2% females, 38.8% males; M age = 13.72 years, SD = 1.25) from eight secondary schools in Dublin, Ireland completed a physical activity recall 7 day diary and measures of intrinsic motivation, competence, relatedness, autonomy and autonomy support. Based on the diary five binary indicators of physical activity were derived reflecting recommended levels of MVPA on a minimum of 3 days, at least three sessions of non-organized physical activity (e.g. jog), team sport, individual sport, and organized non-sport physical activity (e.g. dance). Latent class analysis was used to identify subgroups of adolescents that engaged in similar patterns of physical activity. Profiles of physical activity participation were subsequently compared on motivational characteristics using Kruskal-Wallis tests. Latent class analysis revealed six distinct classes for girls (Organized Run/Swim & Dance/Gym; Organized Dance; Leisure Active Team Sport; Active Individual Sport; Walk/Run/Outdoor games; Non-Participation) and five for boys (Leisure Active Gym; Leisure Active Individual Sport; Active Team Sport; Active Mixed Type; Non-Participation). Significant differences were found between the classes. Girls characterized by participation in team or individual sport, and boys represented by team sport participation demonstrated significantly higher self-determined motivational characteristics relative to other profiles of physical activity. This research offers a nuanced insight into the underlying type of activities that

Variations in adolescents’ motivational characteristics across gender and physical activity patterns: A latent class analysis approach

Directory of Open Access Journals (Sweden)

Margaret Lawler

2017-08-01

Full Text Available Abstract Background Neglecting to take account of the underlying context or type of physical activity (PA that underpins overall involvement has resulted in a limited understanding of adolescents’ PA participation. The purpose of the present research was to identify male and female adolescents’ leisure time PA patterns and examine whether psychological processes derived from self-determination theory differ as a function of the pattern of PA undertaken. Methods Nine hundred ninety-five students (61.2% females, 38.8% males; M age = 13.72 years, SD = 1.25 from eight secondary schools in Dublin, Ireland completed a physical activity recall 7 day diary and measures of intrinsic motivation, competence, relatedness, autonomy and autonomy support. Based on the diary five binary indicators of physical activity were derived reflecting recommended levels of MVPA on a minimum of 3 days, at least three sessions of non-organized physical activity (e.g. jog, team sport, individual sport, and organized non-sport physical activity (e.g. dance. Latent class analysis was used to identify subgroups of adolescents that engaged in similar patterns of physical activity. Profiles of physical activity participation were subsequently compared on motivational characteristics using Kruskal-Wallis tests. Results Latent class analysis revealed six distinct classes for girls (Organized Run/Swim & Dance/Gym; Organized Dance; Leisure Active Team Sport; Active Individual Sport; Walk/Run/Outdoor games; Non-Participation and five for boys (Leisure Active Gym; Leisure Active Individual Sport; Active Team Sport; Active Mixed Type; Non-Participation. Significant differences were found between the classes. Girls characterized by participation in team or individual sport, and boys represented by team sport participation demonstrated significantly higher self-determined motivational characteristics relative to other profiles of physical activity. Conclusion This research

Investigation on flow stability of supercritical water cooled systems

International Nuclear Information System (INIS)

Cheng, X.; Kuang, B.

2006-01-01

Research activities are ongoing worldwide to develop nuclear power plants with supercritical water cooled reactor (SCWR) with the purpose to achieve a high thermal efficiency and to improve their economical competitiveness. However, the strong variation of the thermal-physical properties of water in the vicinity of the pseudo-critical line results in challenging tasks in various fields, e.g. thermal-hydraulic design of a SCWR. One of the challenging tasks is to understand and to predict the dynamic behavior of supercritical water cooled systems. Although many thermal-hydraulic research activities were carried out worldwide in the past as well as in the near present, studies on dynamic behavior and flow stability of SC water cooled systems are scare. Due to the strong density variation, flow stability is expected to be one of the key items which need to be taken into account in the design of a SCWR. In the present work, the dynamic behavior and flow stability of SC water cooled systems are investigated using both numerical and theoretical approaches. For this purpose a new computer code SASC was developed, which can be applied to analysis the dynamic behavior of systems cooled by supercritical fluids. In addition, based on the assumptions of a simplified system, a theoretical model was derived for the prediction of the onset of flow instability. A comparison was made between the results obtained using the theoretical model and those from the SASC code. A good agreement was achieved. This gives the first evidence of the reliability of both the SASC code and the theoretical model

A Simple and Effective Physical Characteristic Profiling Method for Methamphetamine Tablet Seized in China.

Science.gov (United States)

Li, Tao; Hua, Zhendong; Meng, Xin; Liu, Cuimei

2018-03-01

Methamphetamine (MA) tablet production confers chemical and physical properties. This study developed a simple and effective physical characteristic profiling method for MA tablets with capital letter "WY" logos, which realized the discrimination between linked and unlinked seizures. Seventeen signature distances extracted from the "WY" logo were explored as factors for multivariate analysis and demonstrated to be effective to represent the features of tablets in the drug intelligence perspective. Receiver operating characteristic (ROC) curve was used to evaluate efficiency of different pretreatments and distance/correlation metrics, while "Standardization + Euclidean" and "Logarithm + Euclidean" algorithms outperformed the rest. Finally, hierarchical cluster analysis (HCA) was applied to the data set of 200 MA tablet seizures randomly selected from cases all around China in 2015, and 76% of them were classified into a group named after "WY-001." Moreover, the "WY-001" tablets occupied 51-80% tablet seizures from 2011 to 2015 in China, indicating the existence of a huge clandestine factory incessantly manufacturing MA tablets. © 2017 American Academy of Forensic Sciences.

Irreversible Aspects of Continuum Mechanics and Transfer of Physical Characteristics in Moving Fluids : Symposia

CERN Document Server

Sedov, L

1968-01-01

At its meeting on April 23, 1965 in Paris the Bureau of IUTAM decided to have a Symposium on the Irreversible Aspects of Continaum Mechanics held in June 1966 in Vienna. In addition, a Symposium on the Transfer of Physical Characteristics in Moving Fluids which, orig­ inally, had been scheduled to take place in Stockholm was rescheduled to be held in Vienna immediately following the Symposium on the Irre­ versible Aspects of Continuum Mechanics. It was felt that the subjects of the two symposia were so closely related that participants should be given an opportunity to attend both. Both decisions were unanimously approved by the members of the General Assembly of IUTAM. Prof. H. PARKUS, Vienna, was appointed Chairman of the Symposium on the Irreversible Aspects, and Prof. L. I. SEDOV, Moscow, was appointed Chairman of the Symposium on the Transfer of Physical Characteristics, with Prof. P ARKUS being re­ sponsible for the local organization of both symposia. In accordance with the policy set forth by IUTAM...

Conservation of Semarang chinatown traditional settlement as physical characteristics of chinatown district

Science.gov (United States)

Prabowo, Bintang Noor; Widiastuti, Ratih; Bramiana, C. N.

2017-12-01

Historical environment must be conserved due to their contribution toward cultural, social, economic and aesthetic values. They transfer the emotion, thought and backgrounds of social live to modern societies. As one of oldest settlements, Semarang Chinatown gives great influence toward Semarang City and has endless historical values. Old Chinese settlement is very thick with Chinese culture. It becomes the primary source of physical characteristics in this historical environment. However, physical and visual problems come along with the rapid economic growth in Semarang Chinatown. The old buildings that still remains in Semarang Chinatown are in deficient condition and losing their shapes. Moreover, modernization and economic growth influence the change building facade. Several old buildings were replaced with new buildings that tend not to adopt Chinese Architecture style. Consequently, it changes the value of the buildings and the value of the historical environment.

COMPARISON BETWEEN SOME PHYSICAL - CHEMICAL CHARACTERISTICS OF CACAO MILK AND RAW MILK

OpenAIRE

Florin Roman

2009-01-01

The paper presents a comparison between some physical - chemical characteristics of the cacao milk and of the raw milk. For this comparison we made the following determinations for both types of milk: the determination of the dry substance using the drying oven with a 102 °C temperature, the determination of the proteic substance by titration with sodium hydroxide ( NaOH ) N/10, the milk pasteurization control by the starch and potassium iodide test and the pH determination using the indicato...

Physical Characteristics of Cocoa Butter and Palm Stearin Mixture in Milk Chocolate System

Directory of Open Access Journals (Sweden)

Misnawi Jati

2008-12-01

Full Text Available Chocolate products for consumption in tropical areas frequently become soft and tend to bloom due to melting and migration of fat contained, the product becomes dully and less interesting. Fat fraction determines chocolate texture, appearance and its handling. Objective of this research is to study the characteristic of mixed fat of cocoa butter, milk fat and stearin; in which the latest was added into a chocolate formula expected to increase its physical characteristic. Response Surface Methodology design was used for the study at stearin concentration of 10–60 g kg-1 and lecithin of 1–7 g kg-1. Parameters of the study were fat melting point, chocolate hardness and preference on chocolate texture and overall acceptance. Result of the study showed that the stearin concentration significantly altered chocolate physical characteristic, where the lecithin concentration did not influence. The presence of stearin in milk chocolate system showed fat eutectic phenomenon. Substitution of cocoa butter with stearin up to concentration of 35 g kg-1 in the formulation showed a clear eutectic; however, at higher concentrations the phenomenon was compensated by the increase in stearin crystal seed which raised melting point and hardness. This result also clearly indicated that cocoa butter substitution with palm stearin to obtain resistant chocolate should be designed in a range of 43–60 g kg-1 in its formulation, equal to 15–18% from cocoa butter added.Key words : chocolate, cocoa butter, stearin, eutectic, solidifier, emulsifier, melting point, texture.

CONDITIONS OF PHYSICAL MODELING AERODYNAMIC CHARACTERISTICS OF AIRCRAFT WITH CHASSIS HOVERCRAFT

Directory of Open Access Journals (Sweden)

Yu. Yu. Merzlikin

2015-01-01

Full Text Available The features of the physical modeling in the experimental determination of aerodynamics-cal tubes (WT of low-velocity steady and unsteady aerodynamic characteristics at takeoff and landing of aircraft (LA with the chassis air-cushion (ball screw and in studies to determine the stability of equilibrium regimes of movement and shock-absorbing properties of ball screws. Are conscdered the requirements for the experimental facilities, model aircraft with ball screws and re-test of the latest zhimam on the free stream velocity, flow and pressure blowers VР, the frequencies and amplitudes of the oscillations are formulated.

The Influence of the Physical Environment and Sociodemographic Characteristics on Children's Mode of Travel to and From School

Science.gov (United States)

Larsen, Kristian; Hess, Paul; Tucker, Patricia; Irwin, Jennifer; He, Meizi

2009-01-01

Objectives. We examined whether certain characteristics of the social and physical environment influence a child's mode of travel between home and school. Methods. Students aged 11 to 13 years from 21 schools throughout London, Ontario, answered questions from a travel behavior survey. A geographic information system linked survey responses for 614 students who lived within 1 mile of school to data on social and physical characteristics of environments around the home and school. Logistic regression analysis was used to test the influence of environmental factors on mode of travel (motorized vs “active”) to and from school. Results. Over 62% of students walked or biked to school, and 72% from school to home. The likelihood of walking or biking to school was positively associated with shorter trips, male gender, higher land use mix, and presence of street trees. Active travel from school to home was also associated with lower residential densities and lower neighborhood incomes. Conclusions. Our findings demonstrate that active travel is associated with environmental characteristics and suggest that school planners should consider these factors when siting schools in order to promote increased physical activity among students. PMID:19106422

The Characteristics of Electrical and Physical Properties of Peat Soil in Rasau Village, West Kalimantan

Science.gov (United States)

Aminudin, A.; Hasanah, T. R.; Iryati, M.

2018-05-01

The Electrical and physical properties can be used as indicators for measuring soil conditions. One of the methods developed in agricultural systems to obtain information on soil conditions is through measuring of electrical conductivity. Peat soil is one of the natural resources that exist in Indonesia. This study aims to determine the characteristics of peat soil in Rasau village, West Kalimantan. This research was conducted by the properties of electrical conductivity and water content using 5TE Water Contents and EC Sensor equipment, but also to know the change of physical nature of peat soil covering peat soil and peat type. The results showed that the electrical conductivity value of 1-4 samples was 0.02 -0.29 dS/m and the volume water content value (VWC) was 0.255-0.548 m3/m3 and the physical characteristics obtained were peat colour brown to dark brown that allegedly the soil still has a very high content of organic material derived from weathering plants and there are discovery of wood chips, wood powder and leaf powder on the ground. Knowing the information is expected to identify the land needs to be developed to be considered for future peat soil utilization.

Extrusion of blends of cassava leaves and cassava flour: physical characteristics of extrudates

Directory of Open Access Journals (Sweden)

Cristiane da Cunha Salata

2014-09-01

Full Text Available A cassava-based puffed snack was produced using a single screw extruder to determine the effect of the raw material composition (cassava leaf flour and moisture and the process parameters (extrusion temperature and screw speed on the physical characteristics of an extruded-expanded snack. A central composite rotational design, including four factors with 30 treatments, was used with the following as dependent variables: expansion index, specific volume, water solubility index, water absorption index, color (L*, a*, b*, and hardness. Under conditions of low moisture content (12 to 14%, low percentage of cassava leaf flour (2 to 4%, and intermediate conditions of extrusion temperature (100°C and screw speed (230rpm, it was possible to obtain puffed snack products with desirable characteristics.

Physical and Temporal Characteristics of Under 19, Under 21 and Senior Male Beach Volleyball Players

Directory of Open Access Journals (Sweden)

Alexandre Medeiros, Rui Marcelino, Isabel Mesquita, José Manuel Palao

2014-09-01

Full Text Available This study aimed to assess the effects of age groups and players’ role (blocker vs. defender specialist in beach volleyball in relation to physical and temporal variables, considering quality of opposition. 1101 rallies from Under 19 (U19, 933 rallies from Under 21 (U21, and 1480 rallies from senior (senior (Men’s Swatch World Championships, 2010-2011 were observed using video match analysis. Cluster analysis was used to set teams’ competitive levels and establish quality of opposition as “balanced”, “moderate balanced” and “unbalanced” games. The analyzed variables were: temporal (duration of set, total rest time, total work time, duration of rallies, rest time between rallies and physical (number of jumps and number of hits done by defenders and blockers characteristics. A one-way ANOVA, independent samples t-test and multinomial logistic regression were performed to analyze the variables studied. The analysis of temporal and physical characteristics showed differences considering age group, player’s role and quality of opposition. The duration of set, total rest time, and number of jumps done by defenders significantly increased from the U19 to senior category. Multinomial logistic regression showed that in: a balanced games, rest time between rallies was higher in seniors than in U19 or U21; number of jumps done by defenders was higher in seniors than in U19 and U21; b moderate balanced games, number of jumps done by defenders was higher in seniors than in U21 and number of jumps done by blockers was smaller in U19 than U21 or seniors; c unbalanced games, no significant findings were shown. This study suggests differences in players’ performances according to age group and players’ role in different qualities of opposition. The article provides reference values that can be useful to guide training and create scenarios that resemble a competition, taking into account physical and temporal characteristics.

Sifat Fisik Daging Sapi, Kerbau dan Domba pada Lama Postmortem yang Berbeda (Physical Characteristics of Beef, Buffalo and Lamb Meat on Different Postmortem Periods)

OpenAIRE

Komariah (Komariah); Sri Rahayu; Sarjito (Sarjito)

2012-01-01

Physical characteristic of meat is very important in processing since it will determine the quality and type of processing being made. Meat characteristics of each livestock may different, but it is thought to be the same. Society in general assess the characteristics of buffalo and lamb meat with reference to the  characteristics of beef, so that the processing of meat into processed meat products often have different outcomes. The aim of the experiment was to study the physical character...

A cross-sectional cluster analysis of the combined association of physical activity and sleep with sociodemographic and health characteristics in mid-aged and older adults.

Science.gov (United States)

Rayward, Anna T; Duncan, Mitch J; Brown, Wendy J; Plotnikoff, Ronald C; Burton, Nicola W

2017-08-01

This study aimed to identify how different patterns of physical activity, sleep duration and sleep quality cluster together, and to examine how the identified clusters differ in terms of socio-demographic and health characteristics. Participants were adults from Brisbane, Australia, aged 42-72 years who reported their physical activity, sleep duration, sleep quality, socio-demographic and health characteristics in 2011 (n=5854). Two-step Cluster Analyses were used to identify clusters. Cluster differences in socio-demographic and health characteristics were examined using chi square tests (phealth characteristics and a high proportion of participants with low physical activity. Physical activity, sleep duration and sleep quality cluster together in distinct patterns and clusters of poor behaviours are associated with poor health status. Multiple health behaviour change interventions which target both physical activity and sleep should be prioritised to improve health outcomes in mid-aged adults. Copyright © 2017 Elsevier B.V. All rights reserved.

Physical characteristics associated with weight misperception among overweight and obese men: NHANES 1999-2006.

Science.gov (United States)

Lewis, Dwight W; Dutton, Gareth R; Affuso, Olivia

2015-01-01

The purpose of this study was to (1) determine the prevalence of weight misperception among overweight and obese men with total body fat levels ≥ 25%, and (2) examine associations of weight misperception with anthropometric and body composition measures. Data came from 4,200 overweight or obese men from the 1999 to 2006 National Health and Nutrition Examination Survey. Weight misperception was operationalized as having a dual-energy X-ray absorptiometry-derived total body fat percentage ≥25% and classifying oneself as either "underweight" or "about right weight." Logistic regression was used to determine physical characteristics associated with weight misperception. Weight misperception was highest among Mexican American (35.9%) followed by Black (30.8%) and White men (22.9%). Physical characteristics (OR, 95% CI) associated with weight misperception were decreased arm fat (0.95, 0.91-0.98), being overweight (9.02, 5.34-15.24), and having a waist circumference ≤ 94 cm (2.31, 1.72-3.09). Findings suggest that future research should include a measure of adiposity in the operationalization of weight misperception among male populations. © 2014 The Obesity Society.

Physical characteristics of the Japanese in relation to reference man

International Nuclear Information System (INIS)

Tanaka, G.-i.; Kawamura, H.; Nomura, E.

1980-01-01

Quantitative description of physical and other characteristics of the human body provides basic data for the estimation of radiation risk and the establishment of dose equivalent in line with the International Commission on Radiological Protection recommendations. ICRP Reference Man is based essentially on data reported on populations in rather limited areas in the world although Committee 2 of ICRP concedes that ''it is neither feasible nor necessary to specify Reference Man as representative of a well-defined population group''. ICRP Reference Man is not necessarily based on the most recent available data. In order to be more realistic and quantitative in dose equivalent estimation in Japan, it is necessary to consider populations which are largely different from those of European and North American countries in physical dimensions and other aspects. Therefore, standard or reference values of mass and size of organs, body and organ content and metabolic parameters of some elements have been studied. These are compared with the values of ICRP Reference Man authorized up to now, with the intention of establishing ''Reference Japanese Man'' and contributing to the improvement of models of man used in radiation protection. Dose equivalent commitment and annual limit of intake have been calculated using the obtained data for the general population in Japan,for some nuclides. (H.K.)

Microbiological and physical-chemical characteristics of honeys from the bee Melipona fasciculata produced in two regions of Brazil

Directory of Open Access Journals (Sweden)

Rachel Torquato Fernandes

2018-05-01

Full Text Available ABSTRACT: The honey from Tiúba bees (Melipona fasciculata is commercially important in the Brazilian state of Maranhão. However, the absence of any specific legislation for this kind of honey is an obstacle to its increased production and commercialization. Determining the microbiological and physical-chemical characteristics of different Tiúba honey can inform the elaboration of specific legislation. Thus, honey samples from two Water Catchment Areas in Maranhão (Munim and Pericumã, sample size 20 for each were collected and submitted for microbiological analysis (total coliforms, thermotolerant coliforms, molds and yeasts, Clostridium sulfite reducers and Salmonella sp. and physical-chemical analysis (moisture content, reducing and non-reducing sugars, insoluble and soluble solids, ash content, acidity and pH. Most of honeys sampled were suitable for human consumption, except for one sample from Pericumã. Honeys from the two water catchment areas presented differences in some physicochemical characteristics, which can be attributed to the botanic, soil and climatic diversity of the two areas. Still, these Tiúba honey samples did not fall within the Brazilian legislation for Apis mellifera honey for some of the physical-chemical characteristics, and so is not properly regulated, thus reinforcing the need for specific legislation for this type of honey.

Physical attributes, physiological characteristics, on-court performances and nutritional strategies of female and male basketball players.

Science.gov (United States)

Ziv, Gal; Lidor, Ronnie

2009-01-01

This article reviews a series of studies (n = 51) examining physical attributes, physiological characteristics, on-court performances and nutritional strategies of female and male elite basketball players. These studies included relevant information on physical and physiological variables, such as height, weight, somatotype, relative size, aerobic profile, strength, anaerobic power, agility and speed. Six main findings emerged from our review: (i) differences in physical attributes exist among playing positions and skill levels (e.g. guards tend to be lighter, shorter and more mesomorphic than centres); (ii) maximum aerobic capacity (VO(2max)) values of female and male players are 44.0-54.0 and 50-60 mLO(2)/kg/min, respectively; (iii) male and female players of higher skill levels tend to have higher vertical jump values; (iv) the more skilled female and male players are faster and more agile than the less skilled players; (v) guards tend to perform more high-intensity movements during game play compared with forwards and centres; and (vi) a water deficit of 2% of bodyweight can lead to reduced physical and mental performance during an actual game. Five limitations associated with the testing protocols used in the studies are outlined, among them the lack of a longitudinal approach, lack of tests performed under physical exertion conditions, and lack of studies using a time-motion analysis. In addition, three practical recommendations for the basketball coach and the strength and conditioning coach are presented. It is concluded that the data emerging from these studies, combined with the knowledge already obtained from the studies on physical and physiological characteristics of elite basketball players, should be applied by basketball and strength and conditioning coaches when planning training programmes for elite basketball players.

Physical and physiological characteristics of male handball players: influence of playing position and competitive level.

Science.gov (United States)

Haugen, Thomas A; Tønnessen, Espen; Seiler, Stephen

2016-01-01

The purpose of this study was to quantify differences in anthropometrical and physical characteristics according to playing position and competitive level in male elite handball. One hundred and seventy-six national team and 1st division players (age 23±4 years, body mass 89±11 kg, body height 188±5 cm) participated in the study. All participants were tested on throwing velocity, 20-meter sprint, countermovement jump, 3000-meter run, 1RM squat and bench press. Back players achieved higher throwing velocities compared to other positions. National team back players achieved higher velocities in set shots (9.4%, Pteam back players ran faster than 1st division back players over 3000 meters (4.9%, P=0.011, d=0.7). Back players showed better relative strength in squat than pivots (12.1%, P=0.016, d=0.7). Wings had better relative strength in squat that pivots (17.4%, P=0.001, d=1.0) and goalkeepers (13.1%, P=0.016, d=0.8). Pivots were 8.9% stronger than wing players (P=0.044, d=0.7) in 1RM bench press. Varying on-court demands in handball are reflected by different physical and physiological characteristics across playing standard and positions. Physical conditioning of players should therefore be individualized and targeted to solve the position-dependent tasks during play.

Modelling of heat transfer to fluids at a supercritical pressure

International Nuclear Information System (INIS)

Shuisheng, He

2014-01-01

A key feature of Supercritical Water-cooled Reactor (SCWR) is that, by raising the pressure of the reactor coolant fluid above the critical value, a phase change crisis is avoided. However, the changes in water density as it flows through the core of an SCWR are actually much higher than in the current water-cooled reactors. In a typical design, the ratio of the density of water at the core inlet to that at exit is as high as 7:1. Other fluid properties also vary significantly, especially around the pseudo-critical temperature (at which the specific heat capacity peaks). As a result, turbulent flow and heat transfer behaviour in the core is extremely complex and under certain conditions, significant heat transfer deterioration can potentially occur. Consequently, understanding and being able to predict flow and heat transfer phenomena under normal steady operation conditions and in start-up and hypothetical fault conditions are fundamental to the design of SCWR. There have been intensive studies on flow and heat transfer to fluids at supercritical pressure recently and several excellent review papers have been published. In the talk, we will focus on some turbulence modelling issues encountered in CFD simulations. The talk will first discuss some flow and heat transfer issues related to fluids at supercritical pressures and their potential implications in SCWR, and some recent developments in the understanding and modelling techniques of such problems, which will be followed by an outlook for some future developments.Factors which have a major influence on the flow and will be discussed are buoyancy and flow acceleration due to thermal expansion (both are due to density variations but involve different mechanisms) and the nonuniformity of other fluid properties. In addition, laminar-turbulent flow transition coupled with buoyancy and flow acceleration plays an important role in heat transfer effectiveness and wall temperature in the entrance region but such

Heat Transfer Behaviour and Thermohydraulics Code Testing for Supercritical Water Cooled Reactors (SCWRs)

International Nuclear Information System (INIS)

2014-08-01

The supercritical water cooled reactor (SCWR) is an innovative water cooled reactor concept which uses water pressurized above its thermodynamic critical pressure as the reactor coolant. This concept offers high thermal efficiencies and a simplified reactor system, and is hence expected to help to improve economic competitiveness. Various kinds of SCWR concepts have been developed, with varying combinations of reactor type (pressure vessel or pressure tube) and core spectrum (thermal, fast or mixed). There is great interest in both developing and developed countries in the research and development (R&D) and conceptual design of SCWRs. Considering the high interest shown in a number of Member States, the IAEA established in 2008 the Coordinated Research Project (CRP) on Heat Transfer Behaviour and Thermo-hydraulics Code Testing for SCWRs. The aim was to foster international collaboration in the R&D of SCWRs in support of Member States’ efforts and under the auspices of the IAEA Nuclear Energy Department’s Technical Working Groups on Advanced Technologies for Light Water Reactors (TWG-LWR) and Heavy Water Reactors (TWG-HWR). The two key objectives of the CRP were to establish accurate databases on the thermohydraulics of supercritical pressure fluids and to test analysis methods for SCWR thermohydraulic behaviour to identify code development needs. In total, 16 institutes from nine Member States and two international organizations were involved in the CRP. The thermohydraulics phenomena investigated in the CRP included heat transfer and pressure loss characteristics of supercritical pressure fluids, development of new heat transfer prediction methods, critical flow during depressurization from supercritical conditions, flow stability and natural circulation in supercritical pressure systems. Two code testing benchmark exercises were performed for steady state heat transfer and flow stability in a heated channel. The CRP was completed with the planned outputs in

Heat Transfer Behaviour and Thermohydraulics Code Testing for Supercritical Water Cooled Reactors (SCWRs)

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-08-15

The supercritical water cooled reactor (SCWR) is an innovative water cooled reactor concept which uses water pressurized above its thermodynamic critical pressure as the reactor coolant. This concept offers high thermal efficiencies and a simplified reactor system, and is hence expected to help to improve economic competitiveness. Various kinds of SCWR concepts have been developed, with varying combinations of reactor type (pressure vessel or pressure tube) and core spectrum (thermal, fast or mixed). There is great interest in both developing and developed countries in the research and development (R&D) and conceptual design of SCWRs. Considering the high interest shown in a number of Member States, the IAEA established in 2008 the Coordinated Research Project (CRP) on Heat Transfer Behaviour and Thermo-hydraulics Code Testing for SCWRs. The aim was to foster international collaboration in the R&D of SCWRs in support of Member States’ efforts and under the auspices of the IAEA Nuclear Energy Department’s Technical Working Groups on Advanced Technologies for Light Water Reactors (TWG-LWR) and Heavy Water Reactors (TWG-HWR). The two key objectives of the CRP were to establish accurate databases on the thermohydraulics of supercritical pressure fluids and to test analysis methods for SCWR thermohydraulic behaviour to identify code development needs. In total, 16 institutes from nine Member States and two international organizations were involved in the CRP. The thermohydraulics phenomena investigated in the CRP included heat transfer and pressure loss characteristics of supercritical pressure fluids, development of new heat transfer prediction methods, critical flow during depressurization from supercritical conditions, flow stability and natural circulation in supercritical pressure systems. Two code testing benchmark exercises were performed for steady state heat transfer and flow stability in a heated channel. The CRP was completed with the planned outputs in

Investigation of the basic reactor physics characteristics of the Dalat Nuclear Research Reactor

Energy Technology Data Exchange (ETDEWEB)

Huy, Ngo Quang [Centre for Nuclear Technique Application, Ho Chi Minh City (Viet Nam); Thong, Ha Van; Khang, Ngo Phu [Nuclear Research Inst., Da Lat (Viet Nam)

1994-10-01

The Dalat nuclear research reactor was reconstructed from TRIGA MARK II reactor, built in 1963 with nominal power of 250 KW, and reached its planned nominal power of 500 kW for the first time in Feb. 1984. The Dalat reactor has some characteristics distinct from the former TRIGA reactor. Investigation of its characteristics is carried out by the determination of the reactor physics parameters. This paper represents the experimental results obtained for the effective fraction of the delayed photoneutrons, the extraneous neutron source left after the reactor is shut down, the lowest power levels of reactor critical states, the relative axial and radial distributions of thermal neutrons, the safe positive reactivity inserted into the reactor at deep subcritical state, the reactivity temperature coefficient of water, the temperature on the surface of the fuel elements, etc. (author). 10 refs., 10 figs., 2 tabs.

Mexican-American children's perspectives: neighborhood characteristics and physical activity in Texas-Mexico border colonias.

Science.gov (United States)

Mier, Nelda; Lee, Chanam; Smith, Matthew Lee; Wang, Xiaohui; Irizarry, David; Avila-Rodriguez, Elias H; Trevino, Laura; Ory, Marcia G

2013-10-01

The qualitative study described in this article investigated perceptions about environmental factors influencing physical activity (PA) among children from underserved neighborhoods known as colonias in the U.S.-Mexico border. Ten focus groups were conducted with 67 Mexican-American colonia children ages 8 to 13 living in one of the poorest border counties in the U.S. Analyses indicated that PA among children was influenced by neighborhood characteristics, including litter, speeding cars, unleashed dogs, and dark streets. The children also underlined intrapersonal and social environmental factors. Findings may inform policy makers and public health professionals about ways to promote PA among underserved children through urban planning and programs focusing on PA-supportive infrastructure, neighborhood safety, and family- and home-based physical activities.

THE INFLUENCE OF EXPERIMENTAL PROGRAM OF PHYSICAL EDUCATION ON MORPHOLOGICAL CHARACTERISTICS OF MALE PUPILS

Directory of Open Access Journals (Sweden)

Nevenka Zrnzević

2008-08-01

Full Text Available The research purpose was to determine the effects of the experimental program of physical education on morphological characteristics of male pupils from the first-grade of primary school. The experimental program was carried out on the sample of 50 male pupils of the primary schools in Leposavic and Zvecan, age of 7 years ± 6 months. Morphological characteristics were estimated according to 13 variables (body height, total arm length, leg length, biacromial diameter, biiliocristal diameter, wrist width, chest circum ference, upper arm circum ference, upper leg circum ference, triceps skin fold, subscapular skin fold, abdomen skin fold and body mass. The results of the research were processed through standard procedures and basic descriptive parameters were calculated, and variations were determined using multi-variable analysis of variance (MAN′s and uni-variable analysis of variance (AN′s. Multivariable analysis of variance showed a significant statistic difference in morphological characteristics showed at initial and final measuring. On the basis of the results and discussion, it can be concluded that the experimental program has statistically significant effects on the changes of some morphological characteristics.

Risk factor characteristics in carers who physically abuse or neglect their elderly dependants.

Science.gov (United States)

Reay, A M; Browne, K D

2001-02-01

This study investigates the prevalence of, and differences in, risk factor characteristics in a sample of two select populations of carers, one of which physically abused their elderly dependants and one of which neglected them. Nineteen carers (nine who had physically abused and 10 who had neglected their elderly relatives), who were referred to clinical psychology by either their general practitioner or their psychiatrist, were invited to take part in this study. A detailed history of risk factors was obtained, including history of alcohol dependency, type and history of mental ill health, history of maltreatment earlier in life, who they were caring for, how long they had been a carer and whether they felt isolated as a carer. Subjects were then given five assessments to determine whether there were any differences between the two groups. These were the Conflict Tactic Scale, Strain Scale, Beck Depression Inventory, Beck Anxiety Inventory and Cost of Care Index. An examination of the risk factors suggests that heavy alcohol consumption and past childhood abuse by fathers were likely to lead to physical abuse. Significantly higher conflict and depression scores were also present in the physical abuse group, while the neglect group had significantly higher anxiety scores. It is suggested that these findings should be incorporated into an assessment of future risk of abuse or neglect by the carer.

PSYCHOLOGICAL AND SOCIODEMOGRAPHIC CHARACTERISTICS AND DEVELOPMENT OF PHYSICAL EXERCISE DEPENDENCE

Directory of Open Access Journals (Sweden)

Almedina Numanović

Full Text Available ABSTRACT Introduction: Excessive physical exercise combined with certain psychic and sociodemographic factors can lead to dependence. Objective: To examine which factors lead to the emergence of exercise dependence. Methods: Sample consisted of 103 men (mean age 27.3 years, SD 6.127 who performed exercises at gyms at least three times a week in the last year or more in Novi Pazar, Sjenica, Raska and Tutin, Serbia. Participants completed questionnaires and took appropriate tests. Results: Our results showed that there is no association between exercise dependence and financial status, number of siblings, level of education, family stability, health, and medication use among the interviewees. However, it was found that the degree of exercise dependence is associated with marital status and problems with the law. Regression analysis showed that body dysmorphia, body mass index and aggressiveness are better predictors of exercise dependence. Conclusion: People whose self-perception is dismorphic have lower self-esteem, and exercise in gyms to improve their physical appearance. If we consider other characteristics, such as unfavorable BMI, problems with the lаw and being single, it is hardly surprising these individuals cross the line between healthy exercise and exercise dependence. An important finding is that aggressiveness and exercise dependence are related to problems with the law due to aggression, and body dysmorphia. Level of Evidence; Diagnostic studies - Investigating a diagnostic test.

Stable evaluation methods of neutron-physical characteristics of nuclides on the basis of experimental data

International Nuclear Information System (INIS)

Volkov, N.G.; Kryanev, A.V.

1984-01-01

Technique for obtaining estimations of neutron-physical characteristics of nuclides on the basis of stable estimation methods is set forth. The technique presupposes correction of incorrectly determined errors of measurements and disclosure of systematic errors with their succeeding accountancy. A system of orthogonal polynomials is used as approximating functional dependence. The technique is also generalized at the presence of correlation between measurements

A comparison of physical characteristics between patients seeking treatment for neck pain and age-matched healthy people

DEFF Research Database (Denmark)

Jordan, A; Mehlsen, J; Ostergaard, K

1997-01-01

To compare physical characteristics of the cervical musculature, including maximal isometric strength of the flexors and extensors, relative isometric endurance of the extensors and the active range of motion (ROM) in extension in a group of patients seeking treatment for chronic neck pain...

Evaluation of gamma irradiation impact on antibacterial activity, chemical and physical characteristics of the sodium cifteraxon compound

International Nuclear Information System (INIS)

Al-Bachir, M.; Al-Adawi, M. A.; Hammouda, A.; Al-Baroudi, H.

2008-04-01

To investigate the effect of gamma irradiation on the solid state of ceftriaxon sodium salt (C18H16N8Na2O7S3) as a member of the third generation of cephalosporins. Solid Ceftriaxon as a pharmaceutical dosage was exposed to doses of 0, 5, 10, 15, 20, 25, and 50 kGy in 60 Co package irradiator. Physical and chemical characteristics of ceftriaxon have been investigated by using UV (Ultra Violet) and IR (Infra Red) spectroscopic, pH, solubility and DSC (Differential Scanning Calorimetric) methods. Antibacterial activity of ceftriaxon was investigated using Escherichia coli ATCC 25922 as a strain of bacteria. The obtained results indicated that gamma irradiation have no effect on physical and chemical characteristics of ceftriaxon, No significant differences were found between irradiated and non-irradiated samples in the Antibacterial activity of ceftriaxon on E. Coli.(author)

Characteristic of physical, chemical, and microbiological kombucha from various varieties of apples

Science.gov (United States)

Zubaidah, E.; Yurista, S.; Rahmadani, N. R.

2018-03-01

Kombucha is a fermented tea beverage with the addition of kombucha starter also called SCOBY (Symbiotic Culture Of Bacteria and Yeast). The purpose of this research was to know the physical, chemical and microbiological characteristics of kombucha from various varieties of apple kombucha. The study used Randomized Block Design (RAK) with one factor of apple varieties (Anna, Fuji, Granny Smith, Manalagi, Red Delicious, Rome Beauty, Royal Gala). Each treatment was repeated three times. Data was analyzed with ANOVA (Analysis of Variance). The best treatment was selected using Multiple Attribute method. Data of hedonic test was analysed using Friedman Test. The best treatment was obtained on Fuji varieties of kombucha apple with the characteristics as follows: total acid 1.33%; pH 2.95; Total phenol 268.57 μg/ml GAE; Total sugar 6.74%; Antibacterial activity against S.aureus 21.30 mm; Antibacterial activity E.coli 21.20 mm; Antioxidant activity 35.62%; Organoleptic aroma 3.55, taste 3.3; Color 3.4 (on a scale of 1-5)

Physical Characteristics of White Sweet Potato (Ipomoea batatas L.), Rice (Oryza sativa L.), and Tapioca (Manihot esculenta) Flours - Based Seasoning Composite Flour

Science.gov (United States)

Alfani, NNA; Ishartani, D.; Anam, C.; Praseptiangga, D.; Manuhara, G. J.

2017-04-01

The objective of this study was to determine the physical characteristics of seasoning composite flour that made from white sweet potato, rice, and tapioca flours, and determined the best formula of seasoning composite flour. A completely randomized design (CRD) with formula as the single factor was used. The data were analyzed by one-way ANOVA method and followed by Duncan Multiple Range Test (DMRT) at significance 5% if there was a significant difference. The best formula of seasoning composite flour was 30% tapioca flour, 30% rice flour, and 40% white sweet potato flour. The physical characteristics of the best formula were 5.689 ml/g of swelling power, 2.681 g/g of water absorption capacity, 0.887 ml/g of oil absorption capacity, and 22.03% cooking loss. Physical characteristics of the best seasoning composite flour were significantly different from the commercial seasoning flour and showed a better cooking loss, oil absorption capacity, and swelling power than commercial seasoning flour.

Physical Principles of the Method for Determination of Geometrical Characteristics and Particle Recognition in Digital Holography

Science.gov (United States)

Dyomin, V. V.; Polovtsev, I. G.; Davydova, A. Yu.

2018-03-01

The physical principles of a method for determination of geometrical characteristics of particles and particle recognition based on the concepts of digital holography, followed by processing of the particle images reconstructed from the digital hologram, using the morphological parameter are reported. An example of application of this method for fast plankton particle recognition is given.

Effects of physical characteristics of carbon black on metabolic regulation in mice

International Nuclear Information System (INIS)

Chuang, Hsiao-Chi; Hsiao, Ta-Chih; Lee, Chii-Hong; Chun-Te Lin, Justin; Chuang, Kai-Jen; Feng, Po-Hao; Cheng, Tsun-Jen

2018-01-01

Potential adverse effects of human exposure to carbon black (CB) have been reported, but limited knowledge regarding CB-regulated metabolism is currently available. To evaluate how physical parameters of CB influence metabolism, we investigated CB and diesel exhaust particles (DEPs) and attempted to relate various physical parameters, including the hydrodynamic diameter, zeta potential, and particle number concentrations, to lung energy metabolism in female BALB/c mice. A body weight increase was arrested by 3 months of exposure to CB of smaller-size fractions, which was negatively correlated with pyruvate in plasma. There were no significant differences in cytotoxic lactate dehydrogenase (LDH) or total protein in bronchoalveolar lavage fluid (BALF) after 3 months of CB exposure. However, we observed alterations in acetyl CoA and the NADP/NADPH ratio in lung tissues with CB exposure. Additionally, the NADP/NADPH ratio was associated with the zeta potential of CB. Mild peribronchiovascular and interstitial inflammation and multinucleated giant cells (macrophages) with a transparent and rhomboid appearance and containing foreign bodies were observed in lung sections. We suggest that physical characteristics of CB, such as the zeta potential, may disrupt metabolism after pulmonary exposure. These results, therefore, provide the first evidence of a link between pulmonary exposure to CB and metabolism. - Highlights: • We evaluated how physical parameters of CB influence metabolism in mice lungs. • Body weight was arrested by exposure to CB in mice. • CB-induced peribronchiovascular and interstitial inflammation in the lungs. • Disruption in functions of acetyl CoA and NADP/NADPH was observed in lungs. • NADP/NADPH ratio was associated with the zeta potentials of CB.

What contributes to action plan enactment? Examining characteristics of physical activity plans.

Science.gov (United States)

Fleig, Lena; Gardner, Benjamin; Keller, Jan; Lippke, Sonia; Pomp, Sarah; Wiedemann, Amelie U

2017-11-01

Individuals with chronic conditions can benefit from formulating action plans to engage in regular physical activity. However, the content and the successful translation of plans into action, so-called plan enactment, are rarely adequately evaluated. The aim of this study was to describe the content of user-specified plans and to examine whether participants were more likely to enact their plans if these plans were highly specific, viable, and instrumental. The study presents secondary analyses from a larger behavioural intervention in cardiac and orthopaedic rehabilitation. The content of 619 action plans from 229 participants was evaluated by two independent raters (i.e., qualitative analyses and ratings of specificity) and by participants themselves (i.e., instrumentality and viability). Plan enactment was also measured via self-reports. Multilevel analyses examined the relationship between these plan characteristics and subsequent plan enactment, and between plan enactment and aggregated physical activity. Participants preferred to plan leisure-time physical activities anchored around time-based cues. Specificity of occasion cues (i.e., when to act) and highly instrumental plans were positively associated with plan enactment. Interestingly, individuals who planned less specific behavioural responses (i.e., what to do) were more likely to enact their plans. Plan enactment was positively associated with aggregated behaviour. Interventions should not only emphasize the importance of planning, but also the benefits of formulating specific contextual cues. Planning of the behavioural response seems to require less precision. Allowing for some flexibility in executing the anticipated target behaviour seems to aid successful plan enactment. Statement of Contribution What is already known on this subject? Action planning interventions are efficacious in promoting health behaviour. Characteristics of plan content (i.e., specificity) matter for unconditional behaviour

Physical and chemical characteristics of interplanetary dust particles

International Nuclear Information System (INIS)

Gruen, E.

1981-01-01

For the first time, the micrometeoroid experiment on board of Helios allowed the measurement of physical and chemical characteristics of interplanetary dust particles between 0.3AU and 1AU solar distance. During the first 10 orbits of Helios 1,235 impacts of micrometeoroids have been detected. 83 particles have been registered by the ecliptic sensor and 152 by the south sensor. Most of the particles detected by the ecliptic sensor had masses 10 -13 g -10 g and impacted the sensor from the apex direction. The particles observed by the south sensor had masses 10 -15 g -9 g and impacted the sensor from all directions with a slightly enhanced flux from solar direction. The average impact speed of particles with masses 10 -13 g -10 g was 15km/s. From 1AU to.3AU, the observed paritcle flux increased by a factor 5-10. The orbits of the registered particles are highly eccentric, e approx. >= 0.6, and some are hyperbolic. The mass spectra measured upon impact allow the classification of chondritic and iron-rich particles. Approx. 20% of the particles had low densities rho 3 . On 4 particles, a positive electric charge has been observed. (orig.) [de

Physical chemistry and microscopic characteristics of matured beef peccary (Tayassu tajacu

Directory of Open Access Journals (Sweden)

Hugo Rangel Fernandes

2015-06-01

Full Text Available ABSTRACT. Fernandes H.R., Oliveira L.C., Ribeiro S.C.A. & Lourenço L.F.H. [Physical chemistry and microscopic characteristics of matured beef peccary (Tayassu tajacu.] Características físicas e microscópicas da carne maturada de caititu (Tayassu tajacu. Revista Brasileira de Medicina Veterinária, 37(2:167-172, 2015. Universidade do Estado do Pará, Travessa Enéas Pinheiro, 2626, Marco, Belém, PA 66113-200, Brasil. Email: suziar@yahoo.com The objective of this article was to analyze the physical and microscopic matured beef peccary. Were performed analyses of shear force, water holding capacity, weight loss by cooking and scanning electron microscopy in matured beef. The matured beef presented values of shear force between 3.76 and 5.26 %, water activity between 0,96 to 0,98 and weight loss by cooking between 19,46 and 21,17%. Therefore, it was found that the matured beef peccary, were considered soft according to analysis of shear force. The matured beef at 0ºC for 12 days was considered the best product for having less weight loss by cooking and softness according to analysis of shear force and scanning electron microscopy.

Gender differences in characteristics of physical and sexual victimization in patients with dual diagnosis: a cross-sectional study

NARCIS (Netherlands)

de Waal, Marleen M.; Dekker, Jack J. M.; Kikkert, Martijn J.; Kleinhesselink, Maaike D.; Goudriaan, Anna E.

2017-01-01

Patients with substance use disorders and co-occurring mental health disorders are vulnerable to violent victimization. However, no evidence-based interventions are available to reduce patients' vulnerability. An exploration of the characteristics of physical and sexual violence can provide valuable

The physical characteristics of match-play in English schoolboy and academy rugby union.

Science.gov (United States)

Read, Dale B; Jones, Ben; Phibbs, Padraic J; Roe, Gregory A B; Darrall-Jones, Joshua; Weakley, Jonathon J S; Till, Kevin

2018-03-01

The aim was to compare the physical characteristics of under-18 academy and schoolboy rugby union competition by position (forwards and backs). Using a microsensor unit, match characteristics were recorded in 66 players. Locomotor characteristics were assessed by maximum sprint speed (MSS) and total, walking, jogging, striding and sprinting distances. The slow component (<2 m · s -1 ) of PlayerLoad TM (PL slow ), which is the accumulated accelerations from the three axes of movement, was analysed as a measure of low-speed activity (e.g., rucking). A linear mixed-model was assessed with magnitude-based inferences. Academy forwards and backs almost certainly and very likely covered greater total distance than school forwards and backs. Academy players from both positions were also very likely to cover greater jogging distances. Academy backs were very likely to accumulate greater PL slow and the academy forwards a likely greater sprinting distance than school players in their respective positions. The MSS, total, walking and sprinting distances were greater in backs (likely-almost certainly), while forwards accumulated greater PL slow (almost certainly) and jogging distance (very likely). The results suggest that academy-standard rugby better prepares players to progress to senior competition compared to schoolboy rugby.

Measured and perceived environmental characteristics are related to accelerometer defined physical activity in older adults

Directory of Open Access Journals (Sweden)

Strath Scott J

2012-04-01

Full Text Available Abstract Background Few studies have investigated both the self-perceived and measured environment with objectively determined physical activity in older adults. Accordingly, the aim of this study was to examine measured and perceived environmental associations with physical activity of older adults residing across different neighborhood types. Methods One-hundred and forty-eight older individuals, mean age 64.3 ± 8.4, were randomly recruited from one of four neighborhoods that were pre-determined as either having high- or low walkable characteristics. Individual residences were geocoded and 200 m network buffers established. Both objective environment audit, and self-perceived environmental measures were collected, in conjunction with accelerometer derived physical activity behavior. Using both perceived and objective environment data, analysis consisted of a macro-level comparison of physical activity levels across neighborhood, and a micro-level analysis of individual environmental predictors of physical activity levels. Results Individuals residing in high-walkable neighborhoods on average engaged in 11 min of moderate to vigorous physical activity per day more than individuals residing in low-walkable neighborhoods. Both measured access to non-residential destinations (b = .11, p p = .031 were significant predictors of time spent in moderate to vigorous physical activity. Other environmental variables significantly predicting components of physical activity behavior included presence of measured neighborhood crime signage (b = .4785, p = .031, measured street safety (b = 26.8, p = .006, and perceived neighborhood satisfaction (b = .5.8, p = .003. Conclusions Older adult residents who live in high-walkable neighborhoods, who have easy and close access to nonresidential destinations, have lower social dysfunction pertinent to crime, and generally perceive the neighborhood to a higher overall satisfaction are likely to engage in higher levels

Self-Consciousness, Evaluation of Physical Characteristics, and Physical Attractiveness.

Science.gov (United States)

Turner, Robert G.; Gilliland, LuNell

1981-01-01

Investigated the relationship between public self-consciousness and speed of processing information about self. Results indicated that high public self-conciousness subjects required less time to report evaluations of their physical features. In a second study high public self-conciousness was shown to be positively related to judged physical…

Physical environmental characteristics and individual interests as correlates of physical activity in Norwegian secondary schools: The health behaviour in school-aged children study

Directory of Open Access Journals (Sweden)

Samdal Oddrun

2008-09-01

Full Text Available Abstract Background The school has been identified as a key arena for physical activity promotion for young people. Effective change of physical activity behaviour requires identification of consistent and modifiable correlates. The study explores students' interests in school physical activity and facilities in the school environment and examines their associations with students' participation in physical activity during recess and their cross-level interaction effect. Methods This cross-sectional study was based on a national representative sample of Norwegian secondary schools and grade 8 students who participated in the Health Behaviour in School-aged Children (HBSC 2005/06 study. The final sample comprised 68 schools and 1347 students. Physical environment characteristics were assessed through questionnaires completed by the principals, and students' physical activity and interests in physical activity were assessed through student self-completion questionnaires. Results Most students were interested in more opportunities for physical activity in school. Multilevel logistic regression models demonstrated that students attending schools with many facilities had 4.49 times (95% Confidence Interval (CI = 1.93–10.44 higher odds of being physically active compared to students in schools with fewer facilities when adjusting for socio-economic status, sex and interests in school physical activity. Also open fields (Odds Ratio (OR = 4.31, 95% CI = 1.65–11.28, outdoor obstacle course (OR = 1.78, 95% CI = 1.32–2.40, playground equipment (OR = 1.73, 95% CI = 1.24–2.42 and room with cardio and weightlifting equipment (OR = 1.58, 95%CI = 1.18–2.10 were associated with increased participation in physical activity. Both students' overall interests and the physical facilitation of the school environment significantly contributed to the prediction of recess physical activity. The interaction term demonstrated that students' interests might

Characteristics and health conditions of a group of nursing home patients with mental-physical multimorbidity - the MAPPING study

NARCIS (Netherlands)

van den Brink, Anne M. A.; Gerritsen, Debby L.; de Valk, Miranda M. H.; Oude Voshaar, Richard C.; Koopmans, Raymond T. C. M.

Background: Long-term care facilities have partly taken over the traditional asylum function of psychiatric hospitals and house an increasing group of patients with mental-physical multimorbidity (MPM). Little is known about the characteristics, behavior, and care dependency of these patients. This

Physical characteristics, mineral analysis and antioxidant properties of some apricot varieties grown in North India

Directory of Open Access Journals (Sweden)

S.M. Wani

2015-12-01

Full Text Available Eleven apricot varieties (Chinese, Rival, Tilton, Cuminis Haley, Harcot, Margulam, Narmu, Khante, Halman, Badam Chuli, and Cuban were studied for their mineral analysis, physical characteristics, and antioxidant properties. The physical characteristics varied significantly (p ≤ 0.05 among the apricot varieties. Cuban and Harcot showed a comparatively larger fruit size. However, Cuminis Haley and Harcot showed the highest edible bulk. Nine minerals (Zn, Ca, Cu, Fe, Mg, Na, Mn, P, and K were analyzed and were found to vary significantly (p ≤ 0.05 among the apricot varieties. Mn, Cu, and Zn elements were present in micro amounts, while K, Mg, Ca, P, and Fe levels were present in macro amounts. Halman and Margulam showed significantly (p ≤ 0.05 higher amount of the minerals. All the varieties showed lower amounts of Cu as compared to the recommended daily intake, ranging from 0–0.82 ppm. All the varieties proved to be rich sources of polyphenols, with significant (p ≤ 0.05 varietal difference. Khante and Halman showed the significantly (p ≤ 0.05 highest methanolic 1,1-diphenyl-2-picrylhydrazyl (DPPH• radical scavenging activity.

Effect of time and storage conditions on the physical and physico-chemical characteristics of the pulp of yellow and purple passion fruit

Directory of Open Access Journals (Sweden)

Letícia da Silva ARAÚJO

Full Text Available Abstract The aim of this study was evaluate the physical and physico-chemical characteristics of extracted fruit pulp of passion fruit with different skin color (yellow, light and dark purple under refrigeration temperatures and storage times. The extracted pulp of passion fruit was stored at different temperatures: 10 °C, 25 °C; - 30 °C and - 80 °C and at four different storage periods: 0; 10; 20 and 30 days. The following physical and physico-chemical characteristics of the fruit were evaluated: color of fruit peel, fruit weight, diameter, length and width of the fruit, peel thickness, peel mass, pulp mass, pulp color, juice yield, pH, soluble solids, titratable acidity and ratio. The physical and physico-chemical results indicate that all the passion fruit pulp, in natura as well as refrigerated, presented values in conformity to the identity and quality standards. The coloration of the fruit peel influenced the preservation of pulp color during the storage period and conditions. Purple fruits showed no change in the color of the pulp, even under different conservation procedures. The passion fruit pulp can be stored up to 30 days while preserving the physical and physico-chemical characteristics, similar to the pulp in natura.

Investigation on thermo physical characteristics of ethylene glycol based Al:ZnO nanofluids

International Nuclear Information System (INIS)

Kiruba, R.; George, Ritty; Gopalakrishnan, M.; Kingson Solomon Jeevaraj, A.

2015-01-01

The present work describes the experimental aspects of viscosity and thermal conductivity characteristics of nanofluids. Aluminium doped zinc oxide nanostructures were synthesized by chemical precipitation method. Ultrasonic technique is used to disperse the nanostructures in ethylene glycol. Structural and morphological properties of Al doped ZnO nanostructures are characterized using X-ray diffractometer and scanning electron microscopic technique. The effect of concentration and temperature on thermo-physical properties of Al/ZnO nanofluids is also investigated. The experimental results showed there is enhancement in thermal conductivity with rise in temperature which can be utilized for coolant application

Thermal-Hydraulic Analysis of SWAMUP Facility Using ATHLET-SC Code

Energy Technology Data Exchange (ETDEWEB)

Wang, Zidi; Cao, Zhen; Liu, Xiaojing, E-mail: xiaojingliu@sjtu.edu.cn [School of Nuclear Science and Engineering, Shanghai Jiao Tong University, Shanghai (China)

2015-03-16

During the loss of coolant accident (LOCA) of supercritical water-cooled reactor (SCWR), the pressure in the reactor system will undergo a rapid decrease from the supercritical pressure to the subcritical condition. This process is called trans-critical transients, which is of crucial importance for the LOCA analysis of SCWR. In order to simulate the trans-critical transient, a number of system codes for SCWR have been developed up to date. However, the validation work for the trans-critical models in these codes is still missing. The test facility Supercritical WAter MUltiPurpose loop (SWAMUP) with 2 × 2 rod bundle in Shanghai Jiao Tong University (SJTU) will be applied to provide test data for code validation. Some pre-test calculations are important and necessary to show the feasibility of the experiment. In this study, trans-critical transient analysis is performed for the SWAMUP facility with the system code ATHLET-SC, which is modified in SJTU, for supercritical water system. This paper presents the system behavior, e.g., system pressure, coolant mass flow, cladding temperature during the depressurization. The effects of some important parameters such as heating power, depressurization rate on the system characteristics are also investigated in this paper. Additionally, some sensitivities study of the code models, e.g., heat transfer coefficient, critical heat flux correlation are analyzed and discussed. The results indicate that the revised system code ATHLET-SC is capable of simulating thermal-hydraulic behavior during the trans-critical transient. According to the results, the cladding temperature during the transient is kept at a low value. However, the pressure difference of the heat exchanger after depressurization could reach 6 MPa, which should be considered in the experiment.

Characteristic of bioplastic’s physical and mechanical (Study on Tapioca Concentration and Composition Mixture of Plasticizer

Directory of Open Access Journals (Sweden)

Bambang Admadi Harsojuwono

2016-03-01

Full Text Available This study aims to (1 the effect of the concentration of starch and  ratio mixture of plasticizer to the physical and mechanical characteristics of bioplastics (2 determine the concentration of starch and plasticizer RATIO mixture  that results in physical and mechanical characteristics of bio plastics best. The experiment was conducted using a factorial randomized block design. The first factor is the concentration of tapioca consisting of 3 levels 4%, 5% and 6% (w / w. The second factor is the   mixture plasticizer ratio  of glycerol and sorbitol   consisting of 5 levels ie (100: 0%, (95: 5%, (90:10%, (85:15%, (80:20% b / b. Each combination of treatments classified into 2 time  processing bio plastics, so there are 30 experimental units. Variables observed water content, elongation at break, tensile strength and Young's modulus . The data obtained were analyzed of variant and  test of Duncan's. The results showed that the concentration of tapioca and  mixture plasticizer had no effect on water content but significant effect on the elongation at break, tensile strength and Young's modulus. The concentration of starch 6% with a ratio of mixture of plasticizers glycerol: sorbitol ( 100: 0 produces the best characteristics of bioplastics with water content of 3.98%, elongation at break of 18.75%, the tensile strength of 930 MPa and a Young's modulus of 50 MPa.

Physical activity behavior and related characteristics of highly active eighth-grade girls.

Science.gov (United States)

Taverno Ross, Sharon E; Dowda, Marsha; Beets, Michael W; Pate, Russell R

2013-06-01

Although girls are generally less physically active than boys, some girls regularly engage in high levels of physical activity (PA); however, very little is known about these girls and how they differ from those who are less physically active. This study examined the PA behavior and related characteristics of highly active adolescent girls and compared them with those who are less active. Data from 1,866 eighth-grade girls from six field centers across the United States participating in the Trial of Activity for Adolescent Girls (TAAG) were included in the present analysis. Mixed-model analysis of variance examined differences in sociodemographic, anthropometric, psychosocial, and physical activity (accelerometry and self-report) variables between high- and low-active girls; effect sizes were calculated for the differences. High-active girls were taller, had lower body mass indices and body fat, and were less sedentary. High-active girls scored higher on self-efficacy, enjoyment of PA, self-management strategies, outcome-expectancy value, and support from family and friends than low-active girls. Low-active girls participated in more leisure time and educational sedentary activities than high-active girls. High-active girls participated in more PA classes/lessons outside of school, team sports, and individual sports. They were also more likely to participate in sports in an organized setting in the community or at school than low-active girls. Health promotion efforts should focus on decreasing the amount of time girls spend in sedentary activities and replacing that time with organized PA opportunities; such efforts should seek to minimize perceived barriers and increase self-efficacy and support for PA. Copyright © 2013 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Variation of beam characteristics for physical and enhanced dynamic wedge from a dual energy accelerator

International Nuclear Information System (INIS)

Varatharaj, C.; Ravikumar, M.; Sathiyan, S.; Supe, Sanjay S.

2008-01-01

The use of Megavoltage X-ray sources of radiation, with their skin-sparing qualities in radiation therapy has been a boon in relieving patient discomfort and allowing higher tumor doses to be given with fewer restrictions due to radiation effects in the skin. The aim of this study was to compare few of the dosimetric characteristics of a physical and enhanced dynamic wedge from a dual energy (6-18 MV) linear accelerator

Study of thermal hydraulic behavior of supercritical water flowing through fuel rod bundles

International Nuclear Information System (INIS)

Thakre, Sachin; Lakshmanan, S.P.; Kulkarni, Vinayak; Pandey, Manmohan

2009-01-01

Investigations on thermal-hydraulic behavior in Supercritical Water Reactor (SCWR) fuel assembly have obtained a significant attention in the international SCWR community because of its potential to obtain high thermal efficiency and compact design. Present work deals with CFD analysis to study the flow and heat transfer behavior of supercritical water in 4 metre long 7-pin fuel bundle using commercial CFD package ANSYS CFX for single phase steady state conditions. Considering the symmetric conditions, 1/12th part of the fuel rod bundle is taken as a domain of analysis. RNG K-epsilon model with scalable wall functions is used for modeling the turbulence behavior. Constant heat flux boundary condition is applied at the fuel rod surface. IAPWS equations of state are used to compute thermo-physical properties of supercritical water. Sharp variations in its thermo-physical properties (specific heat, density) are observed near the pseudo-critical temperature causing sharp change in heat transfer coefficient. The pseudo-critical point initially appears in the gaps among heated fuel rods, and then spreads radially outward reaching the adiabatic wall as the flow goes downstream. The enthalpy gain in the centre of the channel is much higher than that in the wall region. Non-uniformity in the circumferential distribution of surface temperature and heat transfer coefficient is observed which is in agreement with published literature. Heat transfer coefficient is high on the rod surface near the tight region and decreases as the distance between rod surfaces increases. (author)

Effects of irradiation on physical and sensory characteristics of cowpea seed cultivars ( Vigna unguiculata L. Walp)

Science.gov (United States)

Ocloo, F. C. K.; Darfour, B.; Ofosu, D. O.; Wilson, D. D.

2012-01-01

Cowpeas ( Vigna unguiculata L. Walp) are leguminous seeds widely produced and consumed in most developing countries of sub-Saharan Africa where they are a good source of affordable proteins, minerals and vitamins to the mainly carbohydrate-based diet of sub-Saharan Africa. At storage cowpea may be attacked by insects that cause severe damage to the seeds. The objective of this study was to investigate the effects of gamma irradiation on some physical and sensory characteristics of cowpea seed cultivars. Four cowpea cultivars were irradiated with gamma radiation at dose levels of 0.25, 0.50, 0.75, 1.0 and 1.5 kGy. Moisture content, thousand grain weight and bulk densities were determined as well as the amount of water absorbed during soaking and some sensory characteristics were equally determined. All the physical parameters studied were not significantly ( p>0.05) affected by the radiation. There was no significant ( p>0.05) effect of the radiation on the sensory attributes like flavour, taste, texture, softness and colour of the cowpea seeds. Similarly, the radiation did not affect significantly ( p>0.05) the acceptability of the treated cowpea cultivars.

Control of Canadian once-through direct cycle supercritical water-cooled reactors

International Nuclear Information System (INIS)

Sun, Peiwei; Wang, Baosheng; Zhang, Jianmin; Su, Guanghui

2015-01-01

Highlights: • Dynamic characteristics of Canadian SCWR are analyzed. • Hybrid feedforward and feedback control is adopted to deal with cross-coupling. • Gain scheduling control with smooth weight is applied to deal with nonlinearity. • It demonstrates through simulation that the control requirements are satisfied. - Abstract: Canadian supercritical water-cooled reactor (SCWR) can be modelled as a Multiple-input Multiple-output (MIMO) system. It has a high power-to-flow ratio, strong cross-coupling and high degree of nonlinearity in its dynamic characteristics. Among the outputs, the steam temperature is strongly affected by the reactor power and the most challenging to control. It is difficult to adopt a traditional control system design methodology to obtain a control system with satisfactory performance. In this paper, feedforward control is applied to reduce the effect on steam temperature from the reactor power. Single-input Single-output (SISO) feedback controllers are synthesized in the frequency domain. Using the feedforward controller, the steam temperature variation due to disturbances at the reactor power has been significantly suppressed. The control system can effectively maintain the overall system stability and regulate the plant around a specified operating condition. To deal with the nonlinearities, gain scheduling control strategy is adopted. Different sets of controllers combined by smooth weight functions are used for the plant at different load conditions. The proposed control strategies have been evaluated under various operating scenarios. Simulation results show that satisfactory performance can successfully achieved by the designed control system

An experimental investigation of flow instability between two heated parallel channels with supercritical water

Energy Technology Data Exchange (ETDEWEB)

Xi, Xi; Xiao, Zejun, E-mail: fabulous_2012@sina.com; Yan, Xiao; Li, Yongliang; Huang, Yanping

2014-10-15

Highlights: • Flow instability experiment between two heated channels with supercritical water is carried out. • Two kinds of out of phase flow instability are found and instability boundaries under different working conditions are obtained. • Dynamics characteristics of flow instability are analyzed. - Abstract: Super critical water reactor (SCWR) is the generation IV nuclear reactor in the world. Under normal operation, water enters SCWR from cold leg with a temperature of 280 °C and then leaves the core with a temperature of 500 °C. Due to the sharp change of temperature, there is a huge density change in the core, which could result in potential flow instability and the safety of reactor would be threatened consequently. So it is necessary to carry out relevant investigation in this field. An experimental investigation which concerns with out of phase flow instability between two heated parallel channels with supercritical water has been carried out in this paper. Due to two INCONEL 625 pipes with a thickness of 6.5 mm are adopted, more experimental results are attained. To find out the influence of axial power shape on the onset of flow instability, each heated channel is divided into two sections and the heating power of each section can be controlled separately. Finally the instability boundaries are obtained under different inlet temperatures, axial power shapes, total inlet mass flow rates and system pressures. The dynamics characteristics of out of phase oscillation are also analyzed.

Physical and chemical characteristics of goldenberry fruit (Physalis peruviana L.).

Science.gov (United States)

Yıldız, Gökçen; İzli, Nazmi; Ünal, Halil; Uylaşer, Vildan

2015-04-01

Some physical and chemical characteristics of goldenberry fruit (Physalis peruviana L.) were investigated. These characteristics are necessary for the design of equipments for harvesting, processing, transportation, sorting, separating and packing. The fruit length, diameter, geometric and arithmetic mean diameters, sphericity, surface area, projected areas (vertical-horizontal) and aspect ratio of goldenberries were determined as 17.52 mm, 17.31 mm, 17.33 mm, 17.38 mm, 98.9 %, 0.949 cm(2), 388.67-387.85 mm(2) and 0.988, respectively. The mass of fruit, bulk density, fruit density, porosity and fruit hardness were 3.091 g, 997.3 kg/m(3), 462.3 kg/m(3), 53.61 % and 8.01 N, respectively. The highest static coefficient of friction was observed on rubber surface, followed by stainless steel sheet, aluminum sheet, and plywood materials. The dry matter, water soluble dry matter, ash, protein, oil, carbohydrate, titratable acidity, pH, total sugar, reducing sugar, antioxidant capacity were 18.67 %, 14.17 %, 2.98 %, 1.66 %, 0.18 %, 13.86 %, 1.26 %, 6.07, 63.90 g/kg, 31.99 g/kg and 57.67 %, respectively. The fresh fruits have 145.22 mg gallic acid equivalent (GAE)/100 g total phenol content and skin colour data represented as L*, a*, b*, Chroma (C) and Hue angle (α) were 49.92, 25.11, 50.23, 56.12 and 63.48, respectively.

Abuse Characteristics and Individual Differences Related to Disclosing Childhood Sexual, Physical, and Emotional Abuse and Witnessed Domestic Violence.

Science.gov (United States)

Bottoms, Bette L; Peter-Hagene, Liana C; Epstein, Michelle A; Wiley, Tisha R A; Reynolds, Carrie E; Rudnicki, Aaron G

2016-04-01

Many adult survivors of childhood abuse hide their victimization, avoiding disclosure that could identify perpetrators, end the abuse, and bring help to the victim. We surveyed 1,679 women undergraduates to understand disclosure of childhood sexual, physical, and emotional abuse, and, for the first time, witnessed domestic violence, which many consider to be emotionally abusive. A substantial minority of victims failed to ever disclose their sexual abuse (23%), physical abuse (34%), emotional abuse (20%), and witnessed domestic violence (29%). Overall, abuse-specific factors were better predictors of disclosure than individual-level characteristics. Disclosure of sexual abuse was related to experiencing more frequent abuse (by the same and by multiple perpetrators), being more worried about injury and more upset at the time of the abuse, and self-labeling as a victim of abuse. Disclosure of physical abuse was related to experiencing more frequent abuse (by the same and multiple perpetrators), being less emotionally close to the perpetrator, being older when the abuse ended, being more worried and upset, and self-labeling as a victim. Disclosure of emotional abuse was associated with being older when the abuse ended, and being more worried and upset. Disclosure was unrelated to victim demographic characteristics or defensive reactions (dissociative proneness, fantasy proneness, repressive coping style, and temporary forgetting), except that among physical and emotional abuse victims, repressors were less likely to disclose than non-repressors. Disclosure of witnessing domestic violence was not significantly related to any factors measured. © The Author(s) 2014.

Characteristics of 'tween' participants and non-participants in the VERB™ summer scorecard physical activity promotion program.

Science.gov (United States)

Nickelson, Jen; Alfonso, Moya L; McDermott, Robert J; Bumpus, Elizabeth C; Bryant, Carol A; Baldwin, Julie A

2011-04-01

Creating community-based opportunities for youth to be physically active is challenging for many municipalities. A Lexington, Kentucky community coalition designed and piloted a physical activity program, 'VERB™ summer scorecard (VSS)', leveraging the brand equity of the national VERB™--It's What You Do! campaign. Key elements of VSS subsequently were adopted in Sarasota County, FL. This study identified characteristics of Sarasota's VSS participants and non-participants. Students in Grades 5-8 from six randomly selected public schools completed a survey assessing VSS participation, physical activity level, psychosocial variables, parental support for physical activity and demographics. Logistic regression showed that VSS participants were more likely to be from Grades 5 to 6 versus Grades 7 and 8 [odds ratio (OR) = 6.055] and perceive high versus low parental support for physical activity (OR = 4.627). Moreover, for each unit rise in self-efficacy, the odds of VSS participation rose by 1.839. Chi-squared automatic interaction detector (CHAID) analysis suggested an interaction effect between grade and school socioeconomic status (SES), with a large proportion of seventh and eighth graders from high SES schools being non-participants (76.6%). A VSS-style program can be expected to be more effective with tweens who are younger, in a middle SES school, having high self-efficacy and high parental support for physical activity.

Predictors of race time in male ironman triathletes: physical characteristics, training, or prerace experience?

OpenAIRE

Knechtle, B; Wirth, A; Rosemann, T

2010-01-01

The aim of the present study was to assess whether physical characteristics, training, or prerace experience were related to performance in recreational male Ironman triathletes using bi- and multivariate analysis. 83 male recreational triathletes who volunteered to participate in the study (M age 41.5 yr., SD = 8.9) had a mean body height of 1.80 m (SD = 0.06), mean body mass of 77.3 kg (SD = 8.9), and mean Body Mass Index of 23.7 kg/m2 (SD = 2.1) at the 2009 IRONMAN SWITZERLAND competition....

Compliance with different physical activity recommendations and its association with socio-demographic characteristics using an objective measure.

Science.gov (United States)

Scheers, Tineke; Philippaerts, Renaat; Lefevre, Johan

2013-02-14

In the past decades, several public health guidelines concerning physical activity have been published. This study evaluated compliance with various physical activity guidelines and examined the associations between meeting the guidelines and socio-demographic characteristics. Data were obtained from 357 Flemish men and women (41.9 ± 9.6 years). Physical activity was assessed for seven consecutive days using the SenseWear Armband. The prevalence of sufficient physical activity was calculated according to various public health guidelines. Logistic regressions examined the associations between socio-demographic characteristics and the odds of meeting the different guidelines. 87.2% of men and 68.1% of women achieved ≥150 min/week of moderate-to-vigorous physical activity (MVPA), but only 57.6% and 37.3% accumulated this amount as ≥30 min/day on ≥5 days/week. With regard to vigorous physical activity, 27.9% of men and 15.7% of women achieved ≥75 min/week and 12.8% and 7.0% achieved ≥20 min/day on ≥3 days/week. In addition, 34.9% of men and 21.6% of women attained an average physical activity level (PAL) of 1.75 MET and thus met the criteria for weight maintenance. Only 16.3% of men and 14.1% of women took 10000 steps/day on 7 days/week. Women had a lower probability of achieving 30 min/day MVPA on 5 days/week (OR: 0.40), or a weekly total of 150 min or 500 MET.min MVPA or 75 min of vigorous activity compared to men (OR: 0.27-0.46). In addition, they were 50% less likely to meet the guidelines for weight maintenance. The odds of engaging in 150 min/week MVPA or attaining a PAL of 1.75 was lower with higher age. Educational level was positively related with accumulating 75 min/week of vigorous activity, but negatively with taking 10000 steps/day. Smokers were 60% less likely to participate weekly in 150 min of MVPA compared to non-smokers. The prevalence of sufficient physical activity differed greatly depending on the definition used. Women and subjects

Do physical and relational aggression explain adolescents' friendship selection? The competing roles of network characteristics, gender, and social status.

Science.gov (United States)

Dijkstra, Jan Kornelis; Berger, Christian; Lindenberg, Siegwart

2011-01-01

The role of physical and relational aggression in adolescents' friendship selection was examined in a longitudinal sample of 274 Chilean students from 5th and 6th grade followed over 1 year. Longitudinal social network modeling (SIENA) was used to study selection processes for aggression while influence processes were controlled for. Furthermore, the effects of network characteristics (i.e., reciprocity and transitivity), gender, and social status on friendship selection were examined. The starting assumption of this study was that selection effects based on aggression might have been overestimated in previous research as a result of failing to consider influence processes and alternative characteristics that steer friendship formation. The results show that selection effects of both physical and relational aggression disappeared when network effects, gender, and social status were taken into account. Particularly gender and perceived popularity appeared to be far more important determinants of friendship selection over time than aggression. Moreover, a peer influence effect was only found for relational aggression, and not for physical aggression. These findings suggest that similarity in aggression among befriended adolescents can be considered to be mainly a by-product rather than a leading dimension in friendship selection. © 2011 Wiley-Liss, Inc.

Electrical and physical characteristics for crystalline atomic layer deposited beryllium oxide thin film on Si and GaAs substrates

International Nuclear Information System (INIS)

Yum, J.H.; Akyol, T.; Lei, M.; Ferrer, D.A.; Hudnall, Todd W.; Downer, M.; Bielawski, C.W.; Bersuker, G.; Lee, J.C.; Banerjee, S.K.

2012-01-01

In a previous study, atomic layer deposited (ALD) BeO exhibited less interface defect density and hysteresis, as well as less frequency dispersion and leakage current density, at the same equivalent oxide thickness than Al 2 O 3 . Furthermore, its self-cleaning effect was better. In this study, the physical and electrical characteristics of ALD BeO grown on Si and GaAs substrates are further evaluated as a gate dielectric layer in III–V metal-oxide-semiconductor devices using transmission electron microscopy, selective area electron diffraction, second harmonic generation, and electrical analysis. An as-grown ALD BeO thin film was revealed as a layered single crystal structure, unlike the well-known ALD dielectrics that exhibit either poly-crystalline or amorphous structures. Low defect density in highly ordered ALD BeO film, less variability in electrical characteristics, and great stability under electrical stress were demonstrated. - Highlights: ► BeO is an excellent electrical insulator, but good thermal conductor. ► Highly crystalline film of BeO has been grown using atomic layer deposition. ► An ALD BeO precursor, which is not commercially available, has been synthesized. ► Physical and electrical characteristics have been investigated.

Caribbean and Filipino adolescents' and parents' perceptions of parental authority, physical punishment, and cultural values and their relation to migratory characteristics.

Science.gov (United States)

Hassan, Ghayda; Rousseau, Cécile; Measham, Toby; Lashley, Myrna

2008-01-01

This article describes the perceptions of parents and adolescents of physical punishment in relation to family and migratory characteristics. Adolescents and their parents of Caribbean (n=118) and of Filipino (n=136) heritage responded to questions on their attitude toward physical discipline, their family relations, and their socio-demographic and migratory characteristics. Data analyses show that many Caribbean (78%) and Filipino (41.9%) parents perceive that they should have the right to physically punish their children, while youth disagree with this. The dissonance between parents' and their children's attitudes is related to acculturation factors due to the earlier and more intense exposure of youth to their host society. Further studies should be conducted on the impact of the divergence between parents and their youth's opinions on the actual shifts in power in the parent-child relationship, as well as on immigrant parents' discipline strategies and on the family's adaptation to the challenges of migration.

Preliminary analysis in a clayey mass aimed at ceramic blocks production: physical and mineralogical characteristics

International Nuclear Information System (INIS)

Silva, L.J.M.D. da; Apolonio, T.G.; Salviano, A.F.; Taveira, S.K.A.; Garcia, T.G.C.; Silva, J; Luna, P.A.; Macedo, R.S.

2016-01-01

The physical, chemical and mineralogical characterization of the clayey mass are important in determining its properties, allowing a better knowledge of the raw material used in the manufacture of ceramic products. This work aims to characterize the raw material used in the manufacture of ceramic sealing blocks in a ceramic industry. Thus, it was evaluated by laboratory tests the raw material used in the production of ceramic blocks in a ceramics industry in the region of Carnauba dos Dantas, RN. The methodology used in the tests is the same as the IPT, which consists in carrying out the plasticity testing, particle size, chemical analysis and X-ray diffraction. Results indicate that the sample studied by the physical and mineralogical characteristics, has the potential to be applied in the manufacture of red ceramic products for use in construction. (author)

Chemistry control challenges in a supercritical water-cooled reactor

International Nuclear Information System (INIS)

Guzonas, David; Tremaine, Peter; Jay-Gerin, Jean-Paul

2009-01-01

The long-term viability of a supercritical water-cooled reactor (SCWR) will depend on the ability of designers to predict and control water chemistry to minimize corrosion and the transport of corrosion products and radionuclides. Meeting this goal requires an enhanced understanding of water chemistry as the temperature and pressure are raised beyond the critical point. A key aspect of SCWR water chemistry control will be mitigation of the effects of water radiolysis; preliminary studies suggest markedly different behavior than that predicted from simple extrapolations from conventional water-cooled reactor behavior. The commonly used strategy of adding excess hydrogen at concentrations sufficient to suppress the net radiolytic production of primary oxidizing species may not be effective in an SCWR. The behavior of low concentrations of impurities such as transition metal corrosion products, chemistry control agents, anions introduced via make-up water or from ion-exchange resins, and radionuclides (e.g., 60 Co) needs to be understood. The formation of neutral complexes increases with temperature, and can become important under near-critical and supercritical conditions; the most important region is from 300-450 C, where the properties of water change dramatically, and solvent compressibility effects exert a huge influence on solvation. The potential for increased transport and deposition of corrosion products (active and inactive), leading to (a) increased deposition on fuel cladding surfaces, and (b) increased out-of-core radiation fields and worker dose, must be assessed. There are also significant challenges associated with chemistry sampling and monitoring in an SCWR. The typical methods used in current reactor designs (grab samples, on-line monitors at the end of a cooled, depressurized sample line) will be inadequate, and in-situ measurements of key parameters will be required. This paper describes current Canadian activities in SCWR chemistry and chemistry

Physical and electrical characteristics of silicon oxynitride films with various refractive indices

Energy Technology Data Exchange (ETDEWEB)

Liao, Jeng-Hwa; Hsieh, Jung-Yu; Lin, Hsing-Ju; Tang, Wei-Yao; Chiang, Chun-Ling; Yang, Ling-Wu; Yang, Tahone; Chen, Kuang-Chao; Lu, Chih-Yuan [Macronix International Co. Ltd, No 16, Li-Hsin Road, Hsinchu Science Park, Hsinchu 300, Taiwan (China); Lo, Yun-Shan; Wu, Tai-Bor, E-mail: jhliao@mxic.com.t [Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu 300, Taiwan (China)

2009-09-07

This study explores the relationship between both the physical and the electrical characteristics of silicon oxynitride (SiON) films and the refractive index. The single wafer rapid thermal process modules were used for low pressure chemical vapour deposition of SiON films. A series of SiON films with refractive index between 1.50 and 1.83 were fabricated. Fourier transform infrared absorption spectroscopy and x-ray photoelectron spectroscopy identified the chemical bonding configurations of different SiON films: the Si-N bonds are replaced by Si-O bonds as the refractive index of the SiON films declines. Moreover, the Si atomic ratio is kept between 35% and 40% while the oxygen atomic ratio increases and the nitrogen atomic ratio decreases as the refractive index of the SiON film declines. The electrical characteristics of different SiON-based silicon-oxide-nitride-oxide-silicon (SONOS) devices suggest that (1) the dielectric constant increases with increasing refractive index of the SiON film and (2) the charge-trap density is inversely proportional to the oxygen concentration in the SiON film. Based on these results, the SiON films with various refractive indices can provide a wider application for silicon-based devices, such as SONOS and MOS devices.

Physical and electrical characteristics of silicon oxynitride films with various refractive indices

International Nuclear Information System (INIS)

Liao, Jeng-Hwa; Hsieh, Jung-Yu; Lin, Hsing-Ju; Tang, Wei-Yao; Chiang, Chun-Ling; Yang, Ling-Wu; Yang, Tahone; Chen, Kuang-Chao; Lu, Chih-Yuan; Lo, Yun-Shan; Wu, Tai-Bor

2009-01-01

This study explores the relationship between both the physical and the electrical characteristics of silicon oxynitride (SiON) films and the refractive index. The single wafer rapid thermal process modules were used for low pressure chemical vapour deposition of SiON films. A series of SiON films with refractive index between 1.50 and 1.83 were fabricated. Fourier transform infrared absorption spectroscopy and x-ray photoelectron spectroscopy identified the chemical bonding configurations of different SiON films: the Si-N bonds are replaced by Si-O bonds as the refractive index of the SiON films declines. Moreover, the Si atomic ratio is kept between 35% and 40% while the oxygen atomic ratio increases and the nitrogen atomic ratio decreases as the refractive index of the SiON film declines. The electrical characteristics of different SiON-based silicon-oxide-nitride-oxide-silicon (SONOS) devices suggest that (1) the dielectric constant increases with increasing refractive index of the SiON film and (2) the charge-trap density is inversely proportional to the oxygen concentration in the SiON film. Based on these results, the SiON films with various refractive indices can provide a wider application for silicon-based devices, such as SONOS and MOS devices.

Physical characteristics of cometary dust from dynamical studies - A review

Science.gov (United States)

Sekanina, Z.

1980-01-01

Progress made in the determination of the physical characteristics of cometary dust particles from studies of dust tail dynamics is reviewed. Applications of the combined dynamical photometric approach of Finson and Probstein (1968) to studies of cometary tails exhibiting continuous light intensity variations are discussed, with attention given to determinations of the particle-size-related distribution function of the solar radiation pressure exerted on the particles, the contribution of comets to the interplanetary dust, calculations of dust ejection rates and a Monte Carlo approach to the analysis of dust tails. Investigations of dust streamers and striae, which are believed to be related to comet outbursts entailing brief but sharp enhancements of dust production, are then reviewed, with particular attention given to observations of Comet West 1976 VI. Finally, the question of cometary particle type is addressed, and it is pointed out that the presence of submicron absorbing particles in the striae of Comet West is not incompatible with the presence of micron-size dielectric particles in the inner coma.

Advances in computed radiography systems and their physical imaging characteristics

International Nuclear Information System (INIS)

Cowen, A.R.; Davies, A.G.; Kengyelics, S.M.

2007-01-01

Radiological imaging is progressing towards an all-digital future, across the spectrum of medical imaging techniques. Computed radiography (CR) has provided a ready pathway from screen film to digital radiography and a convenient entry point to PACS. This review briefly revisits the principles of modern CR systems and their physical imaging characteristics. Wide dynamic range and digital image enhancement are well-established benefits of CR, which lend themselves to improved image presentation and reduced rates of repeat exposures. However, in its original form CR offered limited scope for reducing the radiation dose per radiographic exposure, compared with screen film. Recent innovations in CR, including the use of dual-sided image readout and channelled storage phosphor have eased these concerns. For example, introduction of these technologies has improved detective quantum efficiency (DQE) by approximately 50 and 100%, respectively, compared with standard CR. As a result CR currently affords greater scope for reducing patient dose, and provides a more substantive challenge to the new solid-state, flat-panel, digital radiography detectors

Recruitment rates in workplace physical activity interventions: characteristics for success.

Science.gov (United States)

Ryde, Gemma C; Gilson, Nicholas D; Burton, Nicola W; Brown, Wendy J

2013-01-01

To conduct a systematic review to assess recruitment rates in workplace physical activity (PA) intervention studies and describe characteristics of studies with high recruitment rates. Data Source. Electronic and manual searches were conducted. Workplace PA intervention studies that reported the number of employees invited to participate and the number who responded were included. Studies with recruitment rates of ≥70% were categorized as high with the remaining studies (recruitment rate. Seventy-six percent of studies failed to report recruitment rates (n = 30 included for review). Studies with high recruitment rates (n = 8) tended to have longer study duration (mean 1.6 years) and target smaller cohorts of employees (mean n = 199) than comparison studies (3.9 months; n = 1241). For recruitment strategies and intervention components of high studies, involvement of employees was driven by the organization, with PA interventions provided as part of the working day in paid time. These findings suggest a potential to improve recruitment through targeting small cohorts of employees, incorporating PA as a long-term strategy, facilitating organizationally driven employee involvement, and providing PA interventions during paid time.

Physical Activity Characteristics across GOLD Quadrants Depend on the Questionnaire Used.

Directory of Open Access Journals (Sweden)

Heleen Demeyer

Full Text Available The GOLD multidimensional classification of COPD severity combines the exacerbation risk with the symptom experience, for which 3 different questionnaires are permitted. This study investigated differences in physical activity (PA in the different GOLD quadrants and patient's distribution in relation to the questionnaire used.136 COPD patients (58±21% FEV1 predicted, 34F/102M completed COPD assessment test (CAT, clinical COPD questionnaire (CCQ and modified Medical Research Council (mMRC questionnaire. Exacerbation history, spirometry and 6MWD were collected. PA was objectively measured for 2 periods of 1 week, 6 months apart, in 5 European centres; to minimise seasonal and clinical variation the average of these two periods was used for analysis.GOLD quadrants C+D had reduced PA compared with A+B (3824 [2976] vs. 5508 [4671] steps.d-1, p<0.0001. The choice of questionnaire yielded different patient distributions (agreement mMRC-CAT κ = 0.57; CCQ-mMRC κ = 0.71; CCQ-CAT κ = 0.72 with different clinical characteristics. PA was notably lower in patients with an mMRC score ≥2 (3430 [2537] vs. 5443 [3776] steps.d-1, p <0.001 in both the low and high risk quadrants.Using different questionnaires changes the patient distribution and results in different clinical characteristics. Therefore, standardization of the questionnaire used for classification is critical to allow comparison of different studies using this as an entry criterion.ClinicalTrials.gov NCT01388218.

A new simulation model for assessing aircraft emergency evacuation considering passenger physical characteristics

International Nuclear Information System (INIS)

Liu, Yu; Wang, Weijie; Huang, Hong-Zhong; Li, Yanfeng; Yang, Yuanjian

2014-01-01

Conducting a real aircraft evacuation trial is oftentimes unaffordable as it is extremely expensive and may cause severe injury to participants. Simulation models as an alternative have been used to overcome the aforementioned issues in recent years. This paper proposes a new simulation model for emergency evacuation of civil aircraft. Its unique features and advantages over the existing models are twofold: (1) passengers' critical physical characteristics, e.g. waist size, gender, age, and disabilities, which impact the movement and egress time of individual evacuee from a statistical viewpoint, are taken into account in the new model. (2) Improvements are made to enhance the accuracy of the simulation model from three aspects. First, the staggered mesh discretization method together with the agent-based approach is utilized to simulate movements of individual passengers in an emergency evacuation process. Second, each node discretized to represent cabin space in the new model can contain more than one passenger if they are moving in the same direction. Finally, each individual passenger is able to change his/her evacuation route in a real-time manner based upon the distance from the current position to the target exit and the queue length. The effectiveness of the proposed simulation model is demonstrated on Boeing 767-300 aircraft. - Highlights: • A new simulation model of aircraft emergency evacuation is developed. • Some critical physical characteristics of passengers', e.g. waist size, gender, age, and disabilities, are taken into account in the new model. • An agent-based approach along with a multi-level fine network representation is used. • Passengers are able to change their evacuation routes in a real-time manner based upon distance and length of queue

Microbiological and physical-chemical characteristics of fermented milk beverages

Directory of Open Access Journals (Sweden)

E.H.P. Andrade

2015-12-01

Full Text Available This study aimed to evaluate some microbiological and physical-chemical characteristics of fermented milk beverages collected at the main supermarkets in Belo Horizonte (MG. 40 samples of the products corresponding to five distinct brands were collected. They were submitted to the following analyses: Most Probable Number (MPN of total (30ºC and thermal tolerant coliforms (45ºC, Salmonella spp., coagulase positive Staphylococcus, molds and yeasts, lactic acid bacteria, pH, titratable acidity and contents of moisture, total solids, protein and fat. The analyses were carried out during the last week of shelf life. The microbiological quality of the samples was good and the counts of lactic bacteria were above the minimum established by the official legislation. Streptococcus and Lactobacillus were isolated and identified from the products and Lactobacillus delbrueckii was molecularly identified in three samples. The mean values for the contents of fat and protein, titratable acidity, pH, moisture and total solids ranged from 1.24 to 1.98%; 1.88 to 2.22%; 0.54 to 0.66%; 3.91 to 4.16; 81.18 to 83.25% and 16.75 to 18.82%, respectively. All samples had protein content in agreement with the official legislation.

Multivariate Analysis of Erosivity Indices and Rainfall Physical Characteristics Associated with Rainfall Patterns in Rio de Janeiro

Directory of Open Access Journals (Sweden)

Roriz Luciano Machado

2017-12-01

Full Text Available ABSTRACT The identification of areas with greater erosive potential is important for planning soil and water conservation. The objective of this study was to evaluate the physical characteristics of rainfall events in the state of Rio de Janeiro, Brazil, and their interactions with rainfall patterns through multivariate statistical analysis. Rainfall depth, kinetic energy, 30-min intensity (I30, duration of rainfall events, and the erosivity indices KE >10, KE >25, and EI30 in 36 locations (stations were subjected to principal component analysis (PCA and canonical discriminant analysis (CDA. Based on evaluation of the respective historical series of hyetographs, it was found that the advanced pattern occurs with highest frequency (51.8 %, followed by the delayed pattern (26.1 %, and by the intermediate pattern (22.1 %. All the evaluated rainfall characteristics have high response capacity in describing localities and rainfall patterns through PCA and CDA. In CDA, the Tukey test (p<0.05 applied to the scores of the first canonical discriminant function (CDF1 allowed differentiation of the stations with respect to the rainfall and erosivity characteristics for the advanced and delayed patterns. In the delayed pattern, the localities of Angra dos Reis, Campos, Eletrobrás, Manuel Duarte, Santa Isabel do Rio Preto, Tanguá, Teresópolis, Vila Mambucaba, and Xerém had the highest CDF1 scores, indicating that they have rainfalls with higher depth, I30, and duration because the standardized canonical coefficient (SCC and the correlation coefficient (“r” of these characteristics were positive. The rainfall events in the state of Rio de Janeiro differ from one locality to another in relation to the advanced and delayed rainfall patterns, mainly due to the physical characteristics of rainfall depth, I30, and duration, indicating a higher risk of soil loss and runoff in the localities where rainfall events with the delayed pattern prevail.

Effect of Biochar on Soil Physical Characteristics

DEFF Research Database (Denmark)

Sun, Zhencai; Møldrup, Per; Vendelboe, Anders Lindblad

Biochar addition to agricultural soil has been reported to reduce climate gas emission, as well as improve soil fertility and crop productivity. Little, however, is known about biochar effects on soil structural characteristics. This study investigates if biochar-application changes soil structural...... characteristics, as indicated from water retention and gas transport measurements on intact soil samples. Soil was sampled from a field experiment on a sandy loam with four control plots (C) without biochar and four plots (B) with incorporated biochar at a rate of 20 tons per hectare (plot size, 6 x 8 m). The C...... and B plots were placed in a mixed sequence (C-B-C-B-C-B-C-B) and at the same time the eight plots formed a natural pH gradient ranging from pH 7.7 to 6.3. We determined bulk density, saturated hydraulic conductivity (K-sat), soil water retention characteristics, soil-air permeability, and soil...

Constant physics and characteristics of fundamental constant

International Nuclear Information System (INIS)

Tarrach, R.

1998-01-01

We present some evidence which supports a surprising physical interpretation of the fundamental constants. First, we relate two of them through the renormalization group. This leaves as many fundamental constants as base units. Second, we introduce and a dimensional system of units without fundamental constants. Third, and most important, we find, while interpreting the units of the a dimensional system, that is all cases accessible to experimentation the fundamental constants indicate either discretization at small values or boundedness at large values of the corresponding physical quantity. (Author) 12 refs

Factors determining differences in biological effectiveness of ionizing radiations possessing different physical characteristics

International Nuclear Information System (INIS)

Korogodin, V.I.; Krasavin, E.A.

1982-01-01

Radiosensitivity of pro- and eukaryotes (D 0- 1 ) is considered with regard to the linear energy transfer (LET) of ionizing radiations. It was shown that radiosensitivity, as a function of LET, D 0- 1 (LET), is determined by not merely physical characteristics of radiations but also the ability of repair of DNA double strand breaks (DSB). The increase in the radiosensitivity of eukaryotes is connected with the decrease in the DSB repair when cells are exposed to densely ionizing particles. The decrease in DSB repair is apparently connected with the increment of straight DSB, comparing to enzymatic DSB, upon exposure to heavy ions. Potential mechanisms of D 0- 1 (LET) modifications for radiosensitive and superresistant mutants are discussed

Physical activity practice´s characteristics of students of Faculty of Education (University of Seville

Directory of Open Access Journals (Sweden)

Carolina Castañeda Vázquez

2012-02-01

Full Text Available The aim of this research is to know about students´ physical activity from Faculty of Education of University of Seville, and its characteristics.The sample (N=409 is constituted for students from the different degrees of this Faculty (±4.8%; 95%CI. A specific questionnaire, built to that effect, was used to obtain dates. This instrument was validated by different experts on this area of studies, and statistic tests was done to check its reliability (Alpha Cronbach: .78 using SPSS V.15. The main results showed that 62.19% of students do physical activity regularly. Students prefer recreational activities or exercise aimed at being fit or watching health instead competitive games. Activities done by students inside University are very similar to activities done out of this. They also do exercise during all academic year, preferably along the all week or from Monday to Friday, and especially in the afternoon. This group usually practice with friends, classmates or workmates, but lonely too, and they prefer public areas and public or private sport facilities for their sport practice.Key Words: University students, physical activity practice, leisure time.

Predicted Variations of Water Chemistry in the Primary Coolant Circuit of a Supercritical Water Reactor

International Nuclear Information System (INIS)

Yeh, Tsung-Kuang; Wang, Mei-Ya; Liu, Hong-Ming; Lee, Min

2012-09-01

In response to the demand over a higher efficiency for a nuclear power plant, various types of Generation IV nuclear reactors have been proposed. One of the new generation reactors adopts supercritical light water as the reactor coolant. While current in-service light water reactors (LWRs) bear an average thermal efficiency of 33%, the thermal efficiency of a supercritical water reactor (SCWR) could generally reach more than 44%. For LWRs, the coolants are oxidizing due to the presence of hydrogen peroxide and oxygen, and the degradation of structural materials has mainly resulted from stress corrosion cracking. Since oxygen is completely soluble in supercritical water, similar or even worse degradation phenomena are expected to appear in the structural and core components of an SCWR. To ensure proper designs of the structural components and suitable selections of the materials to meet the requirements of operation safety, it would be of great importance for the design engineers of an SCWR to be fully aware of the state of water chemistry in the primary coolant circuit (PCC). Since SCWRs are still in the stage of conceptual design and no practical data are available, a computer model was therefore developed for analyzing water chemistry variation and corrosion behavior of metallic materials in the PCC of a conceptual SCWR. In this study, a U.S. designed SCWR with a rated thermal power of 3575 MW and a coolant flow rate of 1843 kg/s was selected for investigating the variations in redox species concentration in the PCC. Our analyses indicated that the [H 2 ] and [H 2 O 2 ] at the core channel were higher than those at the other regions in the PCC of this SCWR. Due to the self-decomposition of H 2 O 2 , the core channel exhibited a lower [O 2 ] than the upper plenum. Because the middle water rod region was in parallel with the core channel region with relatively high dose rates, the [H 2 ] and [H 2 O 2 ] in this region were higher than those in the other regions

Child physical abuse: prevalence, characteristics, predictors, and beliefs about parent-child violence in South Asian, Middle Eastern, East Asian, and Latina women in the United States.

Science.gov (United States)

Maker, Azmaira H; Shah, Priti V; Agha, Zia

2005-11-01

The present study examined the prevalence, characteristics, beliefs, and demographic predictors of parent-child physical violence among South Asian, Middle Eastern, East Asian, and Latina women in the United States. Two hundred fifty-one college-educated women from a middle to high SES (South Asian/Middle Eastern, n = 93; East Asian,n = 72; Latina,n = 86) completed a self-report survey on childhood experiences and beliefs regarding physical abuse. Seventy-three percent of the South Asian and Middle Eastern sample, 65% of the East Asian sample, and 78% of the Latina sample reported experiencing at least one type of physical abuse. Significant differences in characteristics and perpetrators of abuse were found across groups. Demographic factors did not predict physical abuse. Experiencing physical abuse was the only predictor for acceptance of physical discipline and as a parental privilege or right across groups. Implications of alternate cultural models of family violence based on beliefs and exposure to violence are discussed.

Physical characteristics cannot be used to predict cooling time using cold-water immersion as a treatment for exertional hyperthermia.

Science.gov (United States)

Poirier, Martin P; Notley, Sean R; Flouris, Andreas D; Kenny, Glen P

2018-03-12

We examined if physical characteristics could be used to predict cooling time during cold water immersion (CWI, 2°C) following exertional hyperthermia (rectal temperature ≥39.5°C) in a physically heterogeneous group of men and women (n=62). Lean body mass was the only significant predictor of cooling time following CWI (R2=0.137; P<0.001); however that prediction did not provide the precision (mean residual square error: 3.18±2.28 min) required to act as a safe alternative to rectal temperature measurements.

Effects of gamma irradiation on physical-chemical properties and dewatering characteristics of sludges

International Nuclear Information System (INIS)

Groneman, A.F.

1976-01-01

Separation of solids from liquids is a paramount operation in the processes applied in treating sewage and waste waters. Therfore, studies were undertaken to investigate effects of gamma irradiation on the physical-chemical properties of sludges and the de-watering characteristics of anaerobically digested sludge and aerobically activated sludge. A dose of 300 krad reduced the specific resistance of anaerobically digested sludges from 33 x 10 sec 2 /g to approximately 10 x 10 9 sec 2 /g. This conditioning effect was little influenced by the presence of oxygen or nitrogen. Pasteurization increased the specific resistance to filtration up to 48 x 10 9 sec 2 /g. Dewatering characteristics of raw sludge were not affected by irradiation in the presence of oxygen but a slight conditioning effect was noticed when the sludge was irradiated under deaerated conditions. Experimental evidence indicated that gamma irradiation detached organic substances from the sludge flocks resulting in a decrease of the specific resistance and an increase in the Total Organic Carbon (TOC) and the Chemical Oxygen Demand (COD) in the filtrates. Elutriation reduced but did not eliminate the conditioning effect of gamma irradiation. (author)

Public open space characteristics influencing adolescents' use and physical activity: A systematic literature review of qualitative and quantitative studies.

Science.gov (United States)

Van Hecke, Linde; Ghekiere, Ariane; Veitch, Jenny; Van Dyck, Delfien; Van Cauwenberg, Jelle; Clarys, Peter; Deforche, Benedicte

2018-04-06

The objective of this systematic review was to provide insight into the specific characteristics of public open spaces (POS) associated with adolescents' POS visitation and physical activity (PA). Qualitative research suggests many characteristics to be associated with POS visitation and PA. Quantitative evidence confirmed a positive association between presence of trails, playgrounds and specific types of sports fields (e.g. basketball) with POS visitation and PA, whereas safety and aesthetics seemed subordinate. Suggestions for future research, as well as some methodological recommendations are provided. Copyright © 2018 Elsevier Ltd. All rights reserved.

Taguchi-generalized regression neural network micro-screening for physical and sensory characteristics of bread.

Science.gov (United States)

Besseris, George J

2018-03-01

Generalized regression neural networks (GRNN) may act as crowdsourcing cognitive agents to screen small, dense and complex datasets. The concurrent screening and optimization of several complex physical and sensory traits of bread is developed using a structured Taguchi-type micro-mining technique. A novel product outlook is offered to industrial operations to cover separate aspects of smart product design, engineering and marketing. Four controlling factors were selected to be modulated directly on a modern production line: 1) the dough weight, 2) the proofing time, 3) the baking time, and 4) the oven zone temperatures. Concentrated experimental recipes were programmed using the Taguchi-type L 9 (3 4 ) OA-sampler to detect potentially non-linear multi-response tendencies. The fused behavior of the master-ranked bread characteristics behavior was smart sampled with GRNN-crowdsourcing and robust analysis. It was found that the combination of the oven zone temperatures to play a highly influential role in all investigated scenarios. Moreover, the oven zone temperatures and the dough weight appeared to be instrumental when attempting to synchronously adjusting all four physical characteristics. The optimal oven-zone temperature setting for concurrent screening-and-optimization was found to be 270-240 °C. The optimized (median) responses for loaf weight, moisture, height, width, color, flavor, crumb structure, softness, and elasticity are: 782 g, 34.8 %, 9.36 cm, 10.41 cm, 6.6, 7.2, 7.6, 7.3, and 7.0, respectively.

Taguchi-generalized regression neural network micro-screening for physical and sensory characteristics of bread

Directory of Open Access Journals (Sweden)

George J. Besseris

2018-03-01

Full Text Available Generalized regression neural networks (GRNN may act as crowdsourcing cognitive agents to screen small, dense and complex datasets. The concurrent screening and optimization of several complex physical and sensory traits of bread is developed using a structured Taguchi-type micro-mining technique. A novel product outlook is offered to industrial operations to cover separate aspects of smart product design, engineering and marketing. Four controlling factors were selected to be modulated directly on a modern production line: 1 the dough weight, 2 the proofing time, 3 the baking time, and 4 the oven zone temperatures. Concentrated experimental recipes were programmed using the Taguchi-type L9(34 OA-sampler to detect potentially non-linear multi-response tendencies. The fused behavior of the master-ranked bread characteristics behavior was smart sampled with GRNN-crowdsourcing and robust analysis. It was found that the combination of the oven zone temperatures to play a highly influential role in all investigated scenarios. Moreover, the oven zone temperatures and the dough weight appeared to be instrumental when attempting to synchronously adjusting all four physical characteristics. The optimal oven-zone temperature setting for concurrent screening-and-optimization was found to be 270–240 °C. The optimized (median responses for loaf weight, moisture, height, width, color, flavor, crumb structure, softness, and elasticity are: 782 g, 34.8 %, 9.36 cm, 10.41 cm, 6.6, 7.2, 7.6, 7.3, and 7.0, respectively. Keywords: Industrial engineering, Food science

A critical review on physical factors and functional characteristics that may explain a sex/gender difference in work-related neck/shoulder disorders.

Science.gov (United States)

Côté, Julie N

2012-01-01

The objective of this paper is to critically review recent literature on physical and functional sex/gender (s/g) differences, with focus on physical determinants associated with neck/shoulder musculoskeletal injuries. It is well known that there are s/g differences in anthropometrical and functional body characteristics (e.g. size and strength). However, s/g differences may be wrongly attributed if data analysis does not include appropriate corrections (e.g. by strength for endurance). Recent literature on motor control shows that there may indeed be s/g differences in muscle coordination and movement strategies during upper limb tasks that are not currently explained by methodological inadequacies. Moreover, recent studies have shown differences between men and women in sensory hypersensitivity characteristics associated with neck/shoulder injuries. Taken together, the literature points to the importance of accounting for possible s/g differences at all levels of the biopsychosocial system in order to better understand sex- and gender-specific issues relevant to workplace health. This article critically reviews recent literature and a conceptual model highlighting s/g differences in physical and functional characteristics related to neck/shoulder musculoskeletal disorders (NSMSD). Findings have implications on understanding how personal factors may affect NSMSD risk. With better understanding, practitioners can make more appropriate decisions to prevent work-related NSMSD.

Differences in physical environmental characteristics between adolescents' actual and shortest cycling routes: a study using a Google Street View-based audit.

Science.gov (United States)

Verhoeven, Hannah; Van Hecke, Linde; Van Dyck, Delfien; Baert, Tim; Van de Weghe, Nico; Clarys, Peter; Deforche, Benedicte; Van Cauwenberg, Jelle

2018-05-29

The objective evaluation of the physical environmental characteristics (e.g. speed limit, cycling infrastructure) along adolescents' actual cycling routes remains understudied, although it may provide important insights into why adolescents prefer one cycling route over another. The present study aims to gain insight into the physical environmental characteristics determining the route choice of adolescent cyclists by comparing differences in physical environmental characteristics between their actual cycling routes and the shortest possible cycling routes. Adolescents (n = 204; 46.5% boys; 14.4 ± 1.2 years) recruited at secondary schools in and around Ghent (city in Flanders, northern part of Belgium) were instructed to wear a Global Positioning System device in order to identify cycling trips. For all identified cycling trips, the shortest possible route that could have been taken was calculated. Actual cycling routes that were not the shortest possible cycling routes were divided into street segments. Segments were audited with a Google Street View-based tool to assess physical environmental characteristics along actual and shortest cycling routes. Out of 160 actual cycling trips, 73.1% did not differ from the shortest possible cycling route. For actual cycling routes that were not the shortest cycling route, a speed limit of 30 km/h, roads having few buildings with windows on the street side and roads without cycle lane were more frequently present compared to the shortest possible cycling routes. A mixed land use, roads with commercial destinations, arterial roads, cycle lanes separated from traffic by white lines, small cycle lanes and cycle lanes covered by lighting were less frequently present along actual cycling routes compared to the shortest possible cycling routes. Results showed that distance mainly determines the route along which adolescents cycle. In addition, adolescents cycled more along residential streets (even if no cycle lane was

Pulse radiolysis study of supercritical water-G-value measurement up to 450 degree C

International Nuclear Information System (INIS)

Katsumura, Y.

2006-01-01

It is widely recognized that the understanding of water radiolysis at elevated temperatures is inevitably important in the field of water chemistry in light water reactors because water radiolysis is closely related to many subjects such as hydrogen water chemistry (H 2 injection), SCC (stress corrosion cracking), dose accumulation and so on. This situation would also be applied to the future reactor using supercritical water (>374 C, 22.1MPa) as a coolant, so called supercritical water-cooled reactor (SCWR). Therefore, it is important to investigate water radiolysis of supercritical water. In 1989 Prof. Oka, University of Tokyo, proposed the SCWR as a future reactor and done much design study. This reactor has many advantages such as high energy efficiency, applicability of experience accumulated in light water reactors and supercritical fissile plant, and compact structure. In 2002 the Department of Energy in USA has selected the SCWR as one of the six Generation IV reactors and fundamental research has started in different countries as a national or an international project. In the present research G-values of water radiolysis have been measured by using a pulse radiolysis method up to 450 degree C to obtain the fundamental data relevant to the development of the SCWR. In supercritical water, the pressure controls the density of water easily and it was found that the G-values are strongly dependent not only on temperature but also on density in supercritical water. After presentation of experimental method and its difficulties, temperature and density dependent G-values of water decomposition products in supercritical water would be summarized. (authors)

Are pelvic adhesions associated with pain, physical, emotional and functional characteristics of women presenting with chronic pelvic pain? A cluster analysis.

Science.gov (United States)

Cheong, Ying; Saran, Mili; Hounslow, James William; Reading, Isabel Claire

2018-01-08

Chronic pelvic pain is a debilitating condition. It is unknown if there is a clinical phenotype for adhesive disorders. This study aimed to determine if the presence or absence, nature, severity and extent of adhesions correlated with demographic and patient reported clinical characteristics of women presenting with CPP. Women undergoing a laparoscopy for the investigation of chronic pelvic pain were recruited prospectively; their pain and phenotypic characteristics were entered into a hierarchical cluster analysis. The groups with differing baseline clinical and operative characteristics in terms of adhesions involvement were analyzed. Sixty two women were recruited where 37 had adhesions. A low correlation was found between women's reported current pain scores and that of most severe (r = 0.34) or average pain experienced (r = 0.44) in the last 6 months. Three main groups of women with CPP were identified: Cluster 1 (n = 35) had moderate severity of pain, with poor average and present pain intensity; Cluster 2 (n = 14) had a long duration of symptoms/diagnosis, the worst current pain and worst physical, emotional and social functions; Cluster 3 (n = 11) had the shortest duration of pain and showed the best evidence of coping with low (good) physical, social and emotional scores. This cluster also had the highest proportion of women with adhesions (82%) compared to 51% in Cluster 1 and 71% in Cluster 2. In this study, we found that there is little or no correlation between patient-reported pain, physical, emotional and functional characteristics scores with the presence or absence of intra-abdominal/pelvic adhesions found during investigative laparoscopy. Most women who had adhesions had the lowest reported current pain scores.

America's Cup yacht racing: race analysis and physical characteristics of the athletes.

Science.gov (United States)

Neville, Vernon; Calefato, Julian; Pérez-Encinas, Cristina; Rodilla-Sala, Enrique; Rada-Ruiz, Sergio; Dorochenko, Paul; Folland, Jonathan P

2009-07-01

The America's Cup is the oldest competing trophy in sport, yet little is known of the nature and intensity of racing or the physical characteristics of the athletes. In this study, aspects of the physical demands of America's Cup yacht racing were analysed, including the intensity of exercise and activity pattern of "grinding". Anthropometric data were collected from 92 professional male America's Cup sailors, and fitness data from a top-4 and a lower-7 ranking team during the 32nd America's Cup. Over the 135 races, mean race duration was 82 min (s = 9), with 20 tacks (s = 10) and 8 gybes (s = 3) per race. Grinding bouts were 5.5 s (s = 5.4; range: 2.2-66.3) long, with 143 exercise bouts per race and an exercise-to-rest ratio of 1:6. Mean and peak heart rate was 64% and 92% of maximum for all positions, with bowmen highest (71% and 96%). Grinders were taller, heavier, and stronger than all other positions. Body fat was similar between positions (13%, s = 4). The higher-standard team was stronger and had greater strength endurance, which probably contributed to their quicker manoeuvres. Intensity of exercise was dependent on the similarity of competing boats and the role of the athlete. The short duration and intermittent nature of grinding is indicative of predominantly anaerobic energy provision.

Solid-state, flat-panel, digital radiography detectors and their physical imaging characteristics

Energy Technology Data Exchange (ETDEWEB)

Cowen, A.R. [LXi Research, Academic Unit of Medical Physics, University of Leeds, West Yorkshire (United Kingdom)], E-mail: a.r.cowen@leeds.ac.uk; Kengyelics, S.M.; Davies, A.G. [LXi Research, Academic Unit of Medical Physics, University of Leeds, West Yorkshire (United Kingdom)

2008-05-15

Solid-state, digital radiography (DR) detectors, designed specifically for standard projection radiography, emerged just before the turn of the millennium. This new generation of digital image detector comprises a thin layer of x-ray absorptive material combined with an electronic active matrix array fabricated in a thin film of hydrogenated amorphous silicon (a-Si:H). DR detectors can offer both efficient (low-dose) x-ray image acquisition plus on-line readout of the latent image as electronic data. To date, solid-state, flat-panel, DR detectors have come in two principal designs, the indirect-conversion (x-ray scintillator-based) and the direct-conversion (x-ray photoconductor-based) types. This review describes the underlying principles and enabling technologies exploited by these designs of detector, and evaluates their physical imaging characteristics, comparing performance both against each other and computed radiography (CR). In standard projection radiography indirect conversion DR detectors currently offer superior physical image quality and dose efficiency compared with direct conversion DR and modern point-scan CR. These conclusions have been confirmed in the findings of clinical evaluations of DR detectors. Future trends in solid-state DR detector technologies are also briefly considered. Salient innovations include WiFi-enabled, portable DR detectors, improvements in x-ray absorber layers and developments in alternative electronic media to a-Si:H.

Assessment of spatial and physical neighborhood characteristics that influence sound quality and herewith well-being and health

Directory of Open Access Journals (Sweden)

Jeroen Devilee

2017-01-01

Full Text Available Environmental noise and health studies seldom address the positive effect of environments with high acoustic quality. Sound quality, in turn, is influenced by a large number of factors, including the spatial–physical characteristics of a neighborhood. In general, these characteristics cannot be retrieved from existing databases. In this article, we describe the design of an audit instrument and demonstrate its value for gathering information about these characteristics of neighborhoods. The audit instrument used was derived from research in other fields than environmental health. The instrument was tested in 33 neighborhoods in the Dutch cities of Amsterdam, Rotterdam, and Arnhem. In these neighborhoods, more or less homogeneous subareas were identified that were subject of the audit. The results show that the audit approach is suitable to gather neighborhood data that are relevant for the sound quality of neighborhoods. Together with survey data, they provide information that could further the field of soundscape and health. Several suggestions for improvement of the audit instrument were made.

Review of thermo-physical properties, wetting and heat transfer characteristics of nanofluids and their applicability in industrial quench heat treatment.

Science.gov (United States)

Ramesh, Gopalan; Prabhu, Narayan Kotekar

2011-04-14

The success of quenching process during industrial heat treatment mainly depends on the heat transfer characteristics of the quenching medium. In the case of quenching, the scope for redesigning the system or operational parameters for enhancing the heat transfer is very much limited and the emphasis should be on designing quench media with enhanced heat transfer characteristics. Recent studies on nanofluids have shown that these fluids offer improved wetting and heat transfer characteristics. Further water-based nanofluids are environment friendly as compared to mineral oil quench media. These potential advantages have led to the development of nanofluid-based quench media for heat treatment practices. In this article, thermo-physical properties, wetting and boiling heat transfer characteristics of nanofluids are reviewed and discussed. The unique thermal and heat transfer characteristics of nanofluids would be extremely useful for exploiting them as quench media for industrial heat treatment.

Review of thermo-physical properties, wetting and heat transfer characteristics of nanofluids and their applicability in industrial quench heat treatment

Directory of Open Access Journals (Sweden)

Ramesh Gopalan

2011-01-01

Full Text Available Abstract The success of quenching process during industrial heat treatment mainly depends on the heat transfer characteristics of the quenching medium. In the case of quenching, the scope for redesigning the system or operational parameters for enhancing the heat transfer is very much limited and the emphasis should be on designing quench media with enhanced heat transfer characteristics. Recent studies on nanofluids have shown that these fluids offer improved wetting and heat transfer characteristics. Further water-based nanofluids are environment friendly as compared to mineral oil quench media. These potential advantages have led to the development of nanofluid-based quench media for heat treatment practices. In this article, thermo-physical properties, wetting and boiling heat transfer characteristics of nanofluids are reviewed and discussed. The unique thermal and heat transfer characteristics of nanofluids would be extremely useful for exploiting them as quench media for industrial heat treatment.

Physical Activity Characteristics across GOLD Quadrants Depend on the Questionnaire Used

Science.gov (United States)

Demeyer, Heleen; Gimeno-Santos, Elena; Rabinovich, Roberto A.; Hornikx, Miek; Louvaris, Zafeiris; de Boer, Willem I.; Karlsson, Niklas; de Jong, Corina; Van der Molen, Thys; Vogiatzis, Ioannis; Janssens, Wim; Garcia-Aymerich, Judith; Troosters, Thierry; Polkey, Michael I.

2016-01-01

Background The GOLD multidimensional classification of COPD severity combines the exacerbation risk with the symptom experience, for which 3 different questionnaires are permitted. This study investigated differences in physical activity (PA) in the different GOLD quadrants and patient’s distribution in relation to the questionnaire used. Methods 136 COPD patients (58±21% FEV1 predicted, 34F/102M) completed COPD assessment test (CAT), clinical COPD questionnaire (CCQ) and modified Medical Research Council (mMRC) questionnaire. Exacerbation history, spirometry and 6MWD were collected. PA was objectively measured for 2 periods of 1 week, 6 months apart, in 5 European centres; to minimise seasonal and clinical variation the average of these two periods was used for analysis. Results GOLD quadrants C+D had reduced PA compared with A+B (3824 [2976] vs. 5508 [4671] steps.d-1, p<0.0001). The choice of questionnaire yielded different patient distributions (agreement mMRC-CAT κ = 0.57; CCQ-mMRC κ = 0.71; CCQ-CAT κ = 0.72) with different clinical characteristics. PA was notably lower in patients with an mMRC score ≥2 (3430 [2537] vs. 5443 [3776] steps.d-1, p <0.001) in both the low and high risk quadrants. Conclusions Using different questionnaires changes the patient distribution and results in different clinical characteristics. Therefore, standardization of the questionnaire used for classification is critical to allow comparison of different studies using this as an entry criterion. Clinical Trial Registration ClinicalTrials.gov NCT01388218 PMID:26974332

Review: Physical, physical chemistries, chemical and sensorial characteristics of the several fruits and vegetables chips by low-temperature vacuum frying machine

Directory of Open Access Journals (Sweden)

AHMAD DWI SETYAWAN

2013-11-01

Full Text Available Setyawan AD, Sugiyarto, Solichatun, Susilowati A. 2013. Review: Physical, physical chemistries, chemical and sensorial characteristics of the several fruits and vegetables chips by low-temperature vacuum frying machine. Nusantara Bioscience 5: 84-100. Frying process is one of the oldest cooking methods and most widely practiced in the world. Frying process is considered as a dry cooking method because the process does not involve water. In frying process, oil conduction occurs at high temperature pressing water out of food in the form of bubbles. Fried foods last longer due to reduced water levels lead less decomposition by microbes, even fried foods can be enhanced nutritional value and quality of appearance. Food frying technology can extend the shelf life of fruits and vegetables and frying oil enhances the flavors of the products, however, improper frying oil can have harmful effects on human health. Vacuum frying is a promising technology that may be an option for the production of novel snacks such as fruit and vegetable crisps that present the desired quality and respond to new health trends. This technique fry food at a low temperature and pressure so that the nutritional quality of the food is maintained and the quality of the used oil does not quickly declined and became saturated oils that are harmful to human health. This technique produces chips that have physical, physico-chemical, chemical, and sensory generally better than conventional deep-fat frying methods.

Experimental investigation of the neutron physics characteristics of the Dalat Nuclear Research Reactor

Energy Technology Data Exchange (ETDEWEB)

Huy, Ngo Quang; Thong, Ha Van [Nuclear Research Inst., Da Lat (Viet Nam)

1994-10-01

The investigation of the neutron physics characteristics of the Dalat Reactor has obtained the results as follows: 1/ The effective fraction of delayed photoneutrons and the extraneous neutron source left after reactor shut down are measured. 2/ The lowest power levels of critical states of the reactor are determined. 3/The perturbation effect is investigated when a water column or a plexiglass rod is substituted for a fuel element. 4/ The relative axial and radial distributions of the thermal neutrons measured and the geometrical parameters of the core such as the inhomogeneous coefficients, the buckling, the effective height and radius, the extrapolated distances are obtained. 4/ The thermal neutron distributions are measured around the old graphite reflector. (author). 10 refs., 10 figs., 2 tabs.

Comparative study regarding physical characteristics at male handball players activating on wing and pivot positions at Romanian team Steaua Bucharest

Directory of Open Access Journals (Sweden)

Ioana-Maria CURIŢIANU

2017-02-01

Full Text Available Aim and purpose. The main purpose of this article was to evaluate the differences between physical characteristics at wings and pivots (nine subjects, male handball experienced players, from Romanian handball team Steaua Bucharest, previous to their participation in the Romanian National League, competitive season 2013-2014. Material and methods. In order to achieve this research on the motric evaluation of the players that activate in the 6m. line at team Steaua Bucharest, that activates in Romanian National League, before competitive season 2013-2014, we used the following research methods: literature review, testing method conducted by using five control samples in order to establish the physical qualities of the handball players understudy, the data collected was used to analyze the motric performance of wing and pivot players; the statistical and mathematical method was used to underline the differences between the players that activate in the three positions on the team. Results. The interpretation of the results led to establishing the differences in terms of physical qualities between 6m line players from Romanian male handball team Steaua Bucharest. Results revealed that there are no significant differences in terms of physical qualities between wing players and pivot players. Conclusions. After processing and interpretation of results we can state that the performance of the 6m. line players of the Romanian team understudy was a good one with no significant differences between the results obtained by wings and pivots at the battery of tests (five tests but after this analysis, coaches could perfect their training program in order to achieve better physical results because it is known that motivation, tactics and technical skills play a far more important role in team sports than any other characteristics, but without a good physical training these abilities are incomplete.

Understanding the undelaying mechanism of HA-subtyping in the level of physic-chemical characteristics of protein.

Science.gov (United States)

Ebrahimi, Mansour; Aghagolzadeh, Parisa; Shamabadi, Narges; Tahmasebi, Ahmad; Alsharifi, Mohammed; Adelson, David L; Hemmatzadeh, Farhid; Ebrahimie, Esmaeil

2014-01-01

The evolution of the influenza A virus to increase its host range is a major concern worldwide. Molecular mechanisms of increasing host range are largely unknown. Influenza surface proteins play determining roles in reorganization of host-sialic acid receptors and host range. In an attempt to uncover the physic-chemical attributes which govern HA subtyping, we performed a large scale functional analysis of over 7000 sequences of 16 different HA subtypes. Large number (896) of physic-chemical protein characteristics were calculated for each HA sequence. Then, 10 different attribute weighting algorithms were used to find the key characteristics distinguishing HA subtypes. Furthermore, to discover machine leaning models which can predict HA subtypes, various Decision Tree, Support Vector Machine, Naïve Bayes, and Neural Network models were trained on calculated protein characteristics dataset as well as 10 trimmed datasets generated by attribute weighting algorithms. The prediction accuracies of the machine learning methods were evaluated by 10-fold cross validation. The results highlighted the frequency of Gln (selected by 80% of attribute weighting algorithms), percentage/frequency of Tyr, percentage of Cys, and frequencies of Try and Glu (selected by 70% of attribute weighting algorithms) as the key features that are associated with HA subtyping. Random Forest tree induction algorithm and RBF kernel function of SVM (scaled by grid search) showed high accuracy of 98% in clustering and predicting HA subtypes based on protein attributes. Decision tree models were successful in monitoring the short mutation/reassortment paths by which influenza virus can gain the key protein structure of another HA subtype and increase its host range in a short period of time with less energy consumption. Extracting and mining a large number of amino acid attributes of HA subtypes of influenza A virus through supervised algorithms represent a new avenue for understanding and

Understanding the undelaying mechanism of HA-subtyping in the level of physic-chemical characteristics of protein.

Directory of Open Access Journals (Sweden)

Mansour Ebrahimi

Full Text Available The evolution of the influenza A virus to increase its host range is a major concern worldwide. Molecular mechanisms of increasing host range are largely unknown. Influenza surface proteins play determining roles in reorganization of host-sialic acid receptors and host range. In an attempt to uncover the physic-chemical attributes which govern HA subtyping, we performed a large scale functional analysis of over 7000 sequences of 16 different HA subtypes. Large number (896 of physic-chemical protein characteristics were calculated for each HA sequence. Then, 10 different attribute weighting algorithms were used to find the key characteristics distinguishing HA subtypes. Furthermore, to discover machine leaning models which can predict HA subtypes, various Decision Tree, Support Vector Machine, Naïve Bayes, and Neural Network models were trained on calculated protein characteristics dataset as well as 10 trimmed datasets generated by attribute weighting algorithms. The prediction accuracies of the machine learning methods were evaluated by 10-fold cross validation. The results highlighted the frequency of Gln (selected by 80% of attribute weighting algorithms, percentage/frequency of Tyr, percentage of Cys, and frequencies of Try and Glu (selected by 70% of attribute weighting algorithms as the key features that are associated with HA subtyping. Random Forest tree induction algorithm and RBF kernel function of SVM (scaled by grid search showed high accuracy of 98% in clustering and predicting HA subtypes based on protein attributes. Decision tree models were successful in monitoring the short mutation/reassortment paths by which influenza virus can gain the key protein structure of another HA subtype and increase its host range in a short period of time with less energy consumption. Extracting and mining a large number of amino acid attributes of HA subtypes of influenza A virus through supervised algorithms represent a new avenue for

Direct and Indirect Short-term Effects of Biochar on Physical Characteristics of an Arable Sandy Loam

DEFF Research Database (Denmark)

Sun, Zhencai; Moldrup, Per; Elsgaard, Lars

2013-01-01

Biochar addition to agricultural soil is reported in several studies to reduce climate gas emissions, boost carbon storage, and improve soil fertility and crop productivity. These effects may be partly related to soil physical changes resulting from biochar amendment, but knowledge of how biochar...... application mechanistically affects soil physical characteristics is limited. This study investigated the effect of biochar application on soil structural and functional properties, including specific surface area, water retention, and gas transport parameters. Intact soil cores were taken from a field...... experiment on an arable sandy loam that included four reference plots without biochar and four plots with 20 tons ha(-1) biochar incorporated into the upper 20 cm 7 months before sampling. Water retention was measured at matric potentials ranging from wet (pF 1.0) to extremely dry conditions (pF similar to 6...

Prevalence and characteristics of self-reported physical and mental disorders among adults with hearing loss in Denmark: a national survey

DEFF Research Database (Denmark)

Dammeyer, Jesper; Chapman, Madeleine

2017-01-01

Purpose Existing research shows that people with hearing loss have a high risk of additional physical and mental disorders. However, only a few population-based studies have been conducted. This study assesses the prevalence and characteristics of additional disorders among adults with hearing loss...

To Evaluate the Effect of Soil Physical and Chemical Characteristics on the Growth Characteristics of Saffron (Crocus sativus L. Corms in Tornbat-e Heydariyeh Area

Directory of Open Access Journals (Sweden)

Fariba Zarghani

2016-07-01

Full Text Available Introduction Saffron is one of the most economically important plants across Iran and all over the world. The most important cultivated areas of saffron are in Khorasan-e Razavi and Southern Khorasan provinces (Jihad Keshavarzi Khorasan Razavi, 2013. The corm is the reservoir of photosynthetic materials and plays an important role in the saffron life cycle. Corm size and physicochemical characteristics of soil determine the growth and yield of saffron (Aytekin et al., 2008. It has been advised to use corms with diameter more than 2.5 cm (Kafi et al., 2002. Despite the importance of this plant, few studies have been conducted on the effects of soil characteristics on the growth of the plant in natural field conditions. Therefore, the objective which we will try to achieve is: to evaluate the effect of soil physical and chemical characteristics of the growth of saffron corm and determine the most important effect characteristics. Materials and methods In September 2012, 30 samples of 3 to 5 years old saffron corms were taken from the fields with similar management in Torbat Heydariyeh. The surrounding soil corms (depth of 0 to 30 cm were sampled, too. Dry weight of corms was measured in the laboratory. Air dried soil samples were passed through a 2 mm sieve and used for physical-chemical analyses. Soil texture was determined by using pipet method. Total nitrogen, available phosphorous, available potassium, soil organic carbon and calcium carbonate equivalent were measured in bulk soil samples. Calcium, magnesium, sodium, EC and pH were measured in the saturated soil paste. Fe, Cu and Zn were extracted by DTPA and measured by atomic adsorption spectroscopy. Correlation, regression and neural network technique were used to analyze the data and to identify the most important soil characteristics on the corms characteristics. Results and discussion Diameter and dry weight of corms with mean values of 34.04 mm and 3.72 g, ranged from 22.8 to 51.7 mm

Do positive psychological characteristics modify associations of physical performance with functional decline and institutionalization? Findings from the Longitudinal Aging Study Amsterdam

NARCIS (Netherlands)

Cooper, R.; Huisman, M.; Kuh, D; Deeg, D.J.H.

2011-01-01

Objectives. To investigate whether 3 positive psychological characteristics, related to sense of control, modify the associations of physical performance levels with subsequent functional decline and institutionalization. Method. One thousand five hundred and thirty-two men and women participating

Radiation chemistry in SCWR

International Nuclear Information System (INIS)

Liu, G.; Ghandi, K.

2015-01-01

In 2002, Ghandi and co-workers proposed a model that includes an efficiency factor to account for the 'cage effect'. This model reproduces the plateau observed in available experimental data. Our group is working on reviewing all the reactions considered in the report submitted by Atomic Energy of Canada Limited in 2009 based on the cage effect model, in order to provide recommendations for the values of rate constants to use in modeling of water radiolysis reactions past the critical point. In this paper, we will be focusing on the very fast reactions that are diffusion controlled past the critical point. (author)

Radiation chemistry in SCWR

Energy Technology Data Exchange (ETDEWEB)

Liu, G.; Ghandi, K., E-mail: kghandi@mta.ca [Mount Allison University, Sackville, NB (Canada)

2015-07-01

In 2002, Ghandi and co-workers proposed a model that includes an efficiency factor to account for the 'cage effect'. This model reproduces the plateau observed in available experimental data. Our group is working on reviewing all the reactions considered in the report submitted by Atomic Energy of Canada Limited in 2009 based on the cage effect model, in order to provide recommendations for the values of rate constants to use in modeling of water radiolysis reactions past the critical point. In this paper, we will be focusing on the very fast reactions that are diffusion controlled past the critical point. (author)

Physical, chemical, technological and sensory characteristics of Frankfurter type sausage containing okara flour

Directory of Open Access Journals (Sweden)

Regina Kitagawa Grizotto

2012-09-01

Full Text Available The addition of okara flour to an emulsified meat product (Frankfurter type sausage was evaluated based on the physical, chemical, technological, and sensory characteristics of the final product. Okara, residue from soymilk production, was provided by two soymilk producing companies whose production systems were based on the hot disintegration of the decorticated (company B or undecorticated (company A soybeans. The okara was dehydrated using a flash dryer and then ground into flour (>420 µm. However, The okara flours A and B showed approximately the same amount of protein (35 and 40 g.100 g-1 dwb. However, the okara flour A presented higher values (p < 0.05 for all technological functional properties studied (emulsification capacity, emulsion stability, protein solubility, and water hold capacity than those of okara flour B. The A and B okara flours were used in a frankfurter sausage formulation as substitution of 1.5% and 4% of meat. The results showed that the sausages containing okara flours A and B, as well as the control sausage, were accepted by the sensory panel. Moreover, there were no significant differences (p < 0.05 in the physical (color, objective texture, and emulsion stability and chemical (pH and proximate composition measurements of the sausages with and without the okara flour.

Comparison of ethylcellulose matrix characteristics prepared by solid dispersion technique or physical mixing

Directory of Open Access Journals (Sweden)

Fatemeh Sadeghi

2003-07-01

Full Text Available The characteristics of ethylcellulose matrices prepared from solid dispersion systems were compared with those prepared from physical mixture of drug and polymer. Sodium diclofenac was used as a model drug and the effect of the drug:polymer ratio and the method of matrix production on tablet crushing strength, friability, drug release profile and drug release mechanism were evaluated. The results showed that increasing the polymer content in matrices increased the crushing strengths of tablets. However the friability of tablets was independent of polymer content. Drug release rate was greatly affected by the amount of polymer in the matrices and considerable decrease in release rate was observed by increasing the polymer content. It was also found that the type of mixture used for matrix production had great influence on the tablet crushing strength and drug release rate. Matrices prepared from physical mixtures of drug and polymer was harder than those prepared from solid dispersion systems, but their release rates were considerably faster. This phenomenon was attributed to the encapsulation of drug particles by polymer in matrices prepared from solid dispersion system which caused a great delay in diffusion of the drug through polymer and made diffusion as a rate retarding process in drug release mechanism.

The Importance of Physical Literacy for Physical Education and Recreation

Science.gov (United States)

Basoglu, Umut Davut

2018-01-01

As the basis of characteristics, qualifications, behaviors, awareness, knowledge and understanding of the development of healthy active living and physical recreation opportunities Physical Literacy (PL); has become a global concern in the fields of physical education and recreation since its first use as a term. Experts from different countries…

Physical Characteristics, Chemical Composition, Organoleptic Test And The Number Of Microbes In The Biscuits With Addition Of Flour Banana Peels

Science.gov (United States)

Hernawati; Aryani, A.; Shintawati, R.

2017-02-01

The purpose of this study to analyze the physical characteristics, chemical composition and organoleptic test of biscuit flour with the addition of flour banana peel. Materials used are banana peels Kepok. Kepok banana peel has been found to contain high fiber food. Biscuit-making stage includes the formation of cream, adding flour and wheat flour dietary fiber from banana peels to concentrations of 0% as control, 25%, 50% and 75% of 100 grams of wheat flour; mixing; molding; baking in the oven for 20-25 minutes with a temperature of 180°C. Parameters to be measured, namely the physical characteristics include: hardness, softness, consistency, crispness. Furthermore, the biscuits were tested by chemical analysis (proximate). Organoleptic test include: aroma, taste, mouthfeel, aftertaste. Data were analyzed statistically using SAS computing programs. Physical and organoleptic test results biscuits with the addition of flour banana peels has sufficient level of preference between like-liked. Based on the results of the proximate analysis of biscuits with the addition of flour banana peels has generally been in accordance with the National Standards of Indonesia (SNI). Conclusion of the study that the addition of flour banana peels in biscuits has the potential to become functional foods that contain high fiber.

Geothermal Potential Based on Physical Characteristics of the Region (Case Study: Mount Karang, Pandeglang Regency and Banten Province

Directory of Open Access Journals (Sweden)

Russel Fhillipo

2018-01-01

Full Text Available This research is about geothermal potential of Mount Karang, Banten Province which is based on the characteristics of the region. This research method used is geochemistry sample of hot springs and integrated with GIS method for spatial of geothermal potential. Based on the geothermal potential, Mount Karang is divided into three regions, ie high potential, normal potential, and low potential. The high geothermal potential region covers an area of 24.16 Km2 and which there are Cisolong and Banjar 2 hot springs. The normal potential covers Kawah hot spring. Index of the fault of Mount Karang region is one of the significant physical characteristics to determine geothermal potential.

Physical resources and infrastructure

NARCIS (Netherlands)

Foeken, D.W.J.; Hoorweg, J.; Foeken, D.W.J.; Obudho, R.A.

2000-01-01

This chapter describes the main physical characteristics as well as the main physical and social infrastructure features of Kenya's coastal region. Physical resources include relief, soils, rainfall, agro-ecological zones and natural resources. Aspects of the physical infrastructure discussed are

Which characteristics of planning matter? Individual and dyadic physical activity plans and their effects on plan enactment.

Science.gov (United States)

Keller, Jan; Fleig, Lena; Hohl, Diana Hilda; Wiedemann, Amelie U; Burkert, Silke; Luszczynska, Aleksandra; Knoll, Nina

2017-09-01

Past research supports individual planning as an effective intervention strategy to increase physical activity in individuals. A similar strategy, dyadic planning, adds a planning partner who supports an individual's planning processes. Whether the two planning formats differ in terms of participants' entered plan content and whether and how different content characteristics are linked to plan enactment remains unknown. By investigating the content of generated plans, this study aimed at distinguishing plan characteristics of the two planning formats and examining their role as predictors of later plan enactment. Secondary analyses of a three-arm RCT with German couples (data collection between 2013 and 2015). Couples were assigned to an individual (IPC, n = 114) or dyadic planning condition (DPC, n = 111) and formulated up to 5 physical activity plans for a target person. Couples assigned to a control condition were not included as they did not generate plans. The following characteristics were distinguished and coded for each plan: number of planned opportunities, presence of a planned routine, planned cue- or activity-related specificity, activity-related intensity, and chronological plan rank. One week before (T0) and two weeks following (T2) the intervention (T1), increase vs. no increase of the planned activity was coded as a dichotomous plan enactment variable. Multilevel logistic regressions were fit. Plan enactment was higher in dyadic than in individual planners. Findings indicated that routines (e.g., after work) were positively related to plan enactment, whereas a high specificity of when-cues (e.g., Friday at 6.30 p.m.) showed a negative relationship. None of the examined plan characteristics could explain differences in enactment between IPC and DPC. Linking health behaviours to other behavioural routines seems beneficial for subsequent plan enactment. Dyadic planning was linked with higher enactment rates than individual planning. However, as

Effect of carbonyl iron particles composition on the physical characteristics of MR grease

Energy Technology Data Exchange (ETDEWEB)

Mohamad, Norzilawati, E-mail: mnorzilawati@gmail.com; Mazlan, Saiful Amri, E-mail: amri.kl@utm.my [Vehicle System Engineering, Malaysia – Japan International Institute of Technology, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra (Jalan Semarak), Kuala Lumpur, 54000 (Malaysia); Ubaidillah, E-mail: ubaidillah@uns.ac.id [Vehicle System Engineering, Malaysia – Japan International Institute of Technology, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra (Jalan Semarak), Kuala Lumpur, 54000 (Malaysia); Mechanical Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami 36A, Kentingan, Surakarta, 57126, Central Java, Surakarta (Indonesia)

2016-03-29

Magnetorheological (MR) grease is an extension of the study of magnetorheological materials. The MR grease can help to reduce the particles sedimentation problem occurred in the MR fluids. Within this study, an effort has been taken to investigate the effect of different weight compositions of carbonyl iron particles on the physical and chemical characteristics of the MR grease under off-state condition (no magnetic field). The MR grease is prepared by mixing carbonyl iron particles having a size range of 1 to 10 µm with commercial NPC Highrex HD-3 grease. Characterizations of MR grease are investigated using Vibrating Sample Magnetometer (VSM), Environmental Scanning Electron Microscopy (ESEM), Differential Scanning Calorimeter (DSC) and rheometer. The dependency of carbonyl iron particles weight towards the magnetic properties of MR grease and other characterizations are investigated.

Physical characteristics of the Laccadive sea (Lakshadweep)

Digital Repository Service at National Institute of Oceanography (India)

Varkey, M.J.; Das, V.K.; RamaRaju, D.V.

and current. Considering the physical behaviour, the coastal waters of this highly industrialised region were found to possess high instantaneous dilution capacity. However the spatial and temporal variability of the parameters calls for better understanding...

Physical and chemical characteristics of fluorinel/sodium calcine generated during 30 cm Pilot-Plant Run 17

International Nuclear Information System (INIS)

Brewer, K.N.; Kessinger, G.F.; Littleton, L.L.; Olson, A.L.

1993-07-01

The 30 centimeter (cm) pilot plant calciner Run 17, of March 9, 1987, was performed to study the calcination of fluroinel-sodium blended waste blended at the ratio 3.5:1 fluorinel to sodium, respectively. The product of the run was analyzed by a variety of analytical techniques that included X-ray powder diffraction (XRD), inductively coupled plasma spectroscopy (ICP), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) to deduce physical and chemical characteristics. The analytical data, as well as data analyses and conclusions drawn from the data, are presented

Power flattening and reactivity suppression strategies for the Canadian supercritical water reactor concept

International Nuclear Information System (INIS)

McDonald, M.; Colton, A.; Pencer, J.

2015-01-01

The Canadian supercritical water-cooled reactor (SCWR) is a conceptual heavy water moderated, supercritical light water cooled pressure tube reactor. In contrast to current heavy water power reactors, the Canadian SCWR will be a batch fuelled reactor. Associated with batch fuelling is a large beginning-of-cycle excess reactivity. Furthermore, radial power peaking arising as a consequence of batch refuelling must be mitigated in some way. In this paper, burnable neutron absorber (BNA) added to fuel and absorbing rods inserted into the core are considered for reactivity management and power flattening. A combination of approaches appears adequate to reduce the core radial power peaking, while also providing reactivity suppression. (author)

Parents of children with physical disabilities perceive that characteristics of home exercise programs and physiotherapists' teaching styles influence adherence: a qualitative study.

Science.gov (United States)

Lillo-Navarro, Carmen; Medina-Mirapeix, Francesc; Escolar-Reina, Pilar; Montilla-Herrador, Joaquina; Gomez-Arnaldos, Francisco; Oliveira-Sousa, Silvana L

2015-04-01

What are the perceptions of parents of children with physical disabilities about the home exercise programs that physiotherapists prescribe? How do these perceptions affect adherence to home exercise programs? Qualitative study using focus groups and a modified grounded theory approach. Parents of children with physical disabilities who have been prescribed a home exercise program by physiotherapists. Twenty-eight parents participated in the focus groups. Two key themes that related to adherence to home exercise programs in young children with physical disabilities were identified: the characteristics of the home exercise program; and the characteristics of the physiotherapist's teaching style. In the first theme, the participants described their experiences regarding their preference for exercises, which was related to the perceived effects of the exercises, their complexity, and the number of exercises undertaken. These factors determined the amount of time spent performing the exercises, the effect of the exercises on the family's relationships, and any sense of related burden. In the second theme, participants revealed that they adhered better to prescribed exercises when their physiotherapist made an effort to build their confidence in the exercises, helped the parents to incorporate the home exercise program into their daily routine, provided incentives and increased motivation. Parents perceive that their children's adherence to home-based exercises, which are supervised by the parents, is more successful when the physiotherapist's style and the content of the exercise program are positively experienced. These findings reveal which issues should be considered when prescribing home exercise programs to children with physical disabilities. [Lillo-Navarro C, Medina-Mirapeix F, Escolar-Reina P, Montilla-Herrador J, Gomez-Arnaldos F, Oliveira-Sousa SL (2015) Parents of children with physical disabilities perceive that characteristics of home exercise programs and

Quantum Physics for Beginners.

Science.gov (United States)

Strand, J.

1981-01-01

Suggests a new approach for teaching secondary school quantum physics. Reviews traditional approaches and presents some characteristics of the three-part "Quantum Physics for Beginners" project, including: quantum physics, quantum mechanics, and a short historical survey. (SK)

Physical, chemical and mineralogical characteristics of some selected gardud soils of kordofan region

International Nuclear Information System (INIS)

Elgubshawi, Abdelmoneim Ahmed Ismail

1995-05-01

Recently much of the attention is given to gardud soil as the main alternative for the depleted marginal sandy soils. A lack of exact knowledge regarding these soils are evident. For studying gardud soil four sites were chosen according to the annual rainfall. Two pits were excavated in each site to represent the concaved and convexed locations plus composite samples to cover the area between two pits. Morphological, physical, chemical and mineralogical investigations were made. The results showed that the gardud soils were relatively differed within and between sites due to the climate and the topography. The dominant clay minerals are kaolinite, montmorillonite and illte. The chemical and physical characteristics were poor. Some of the restrictions limiting the use of these soils such as erosion, hardness, fertility, stoniness, drought and acidity. According to the American system of soil classification, the soils studied were given the following classification: (1) Bardab soil: (A) Kanhablic rhodustalf-fine clay, kaolinite, isohyperthermic (concaved). (B) Kandic paleustalf-very fine clay, kaolinite, isohyperthermic (convexed). (2) Sodari: (A) Typic comborthid-coarse loamy, mixed hyperthermic (concave). (B) Typic comborthid-coarse loamy, mixed hyperthermic (convexed). (3) Nihud (Rahad Elsilk): (A) Rhodic paleustalf-fine loamy, kaolinite isohyperthermic (concaved). (B) Aridic paleustalf-fine loamy kaolinite isohyperthermic (convexed). (4) Umgamalla: (A) Ustic hapustalf-fine loamy kaolinite isohyperthermic (concaved). (B)Ustic hapustalf-fine loamy kaolinite isohyperthermic (convexed). (Author)

Physical, chemical and mineralogical characteristics of some selected gardud soils of kordofan region

Energy Technology Data Exchange (ETDEWEB)

Elgubshawi, Abdelmoneim Ahmed Ismail [Department of Biochemistry and Soil Science, Faculty of agriculture, University of Khartoum, Khartoum (Sudan)

1995-05-01

Recently much of the attention is given to gardud soil as the main alternative for the depleted marginal sandy soils. A lack of exact knowledge regarding these soils are evident. For studying gardud soil four sites were chosen according to the annual rainfall. Two pits were excavated in each site to represent the concaved and convexed locations plus composite samples to cover the area between two pits. Morphological, physical, chemical and mineralogical investigations were made. The results showed that the gardud soils were relatively differed within and between sites due to the climate and the topography. The dominant clay minerals are kaolinite, montmorillonite and illte. The chemical and physical characteristics were poor. Some of the restrictions limiting the use of these soils such as erosion, hardness, fertility, stoniness, drought and acidity. According to the American system of soil classification, the soils studied were given the following classification: (1) Bardab soil: (A) Kanhablic rhodustalf-fine clay, kaolinite, isohyperthermic (concaved). (B) Kandic paleustalf-very fine clay, kaolinite, isohyperthermic (convexed). (2) Sodari: (A) Typic comborthid-coarse loamy, mixed hyperthermic (concave). (B) Typic comborthid-coarse loamy, mixed hyperthermic (convexed). (3) Nihud (Rahad Elsilk): (A) Rhodic paleustalf-fine loamy, kaolinite isohyperthermic (concaved). (B) Aridic paleustalf-fine loamy kaolinite isohyperthermic (convexed). (4) Umgamalla: (A) Ustic hapustalf-fine loamy kaolinite isohyperthermic (concaved). (B)Ustic hapustalf-fine loamy kaolinite isohyperthermic (convexed). (Author) 39 refs. , 8 tabs. , 35 figs.

Association between perceived neighbourhood characteristics, physical activity and diet quality: results of the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil).

Science.gov (United States)

Chor, Dóra; Cardoso, Letícia Oliveira; Nobre, Aline Araújo; Griep, Rosane Härter; Fonseca, Maria de Jesus Mendes; Giatti, Luana; Bensenor, Isabela; Del Carmen Bisi Molina, Maria; Aquino, Estela M L; Diez-Roux, Ana; de Pina Castiglione, Débora; Santos, Simone M

2016-08-09

The study explores associations between perceived neighbourhood characteristics, physical activity and diet quality, which in Latin America and Brazil have been scarcely studied and with inconsistent results. We conducted a cross-sectional analysis of 14,749 individuals who participated in the Brazilian Longitudinal Study of Adult Health (Estudo Longitudinal de Saúde do Adulto, ELSA-Brasil) baseline. The study included current and retired civil servants, aged between 35 and 74 years, from universities and research institutes in six Brazilian states. The International Physical Activity Questionnaire (IPAQ) long form was used to characterize physical activity during leisure time and commuting; additional questions assessed how often fruit and vegetables were consumed, as a proxy for diet quality. Neighbourhood characteristics were evaluated by the "Walking Environment" and "Availability of Healthy Foods" scales originally used in the Multi-Ethnic Study of Atherosclerosis (MESA). Associations were examined using multinomial logistic regression. Perceiving a more walkable neighbourhood was positively associated with engaging in leisure time physical activity and doing so for longer weekly. Compared with those who saw their neighbourhood as less walkable, those who perceived it as more walkable had 1.69 (95 % CI 1.57-1.83) and 1.39 (1.28-1.52) greater odds of engaging in leisure time physical activity for more than 150 min/week or up to 150 min/week (vs. none), respectively. Perceiving a more walkable neighbourhood was also positively associated with transport-related physical activity. The same pattern was observed for diet: compared with participants who perceived healthy foods as less available in their neighbourhood, those who saw them as more available had odds 1.48 greater (1.31-1.66) of eating fruits, and 1.47 greater (1.30-1.66) of eating vegetables, more than once per day. Perceived walkability and neighbourhood availability of healthy food were

The link between perceived characteristics of neighbourhood green spaces and adults' physical activity in UK cities: analysis of the EURO-URHIS 2 Study.

Science.gov (United States)

Ali, Omer; Di Nardo, Francesco; Harrison, Annie; Verma, Arpana

2017-08-01

Urban dwellers represent half the world's population and are increasing worldwide. Their health and behaviours are affected by the built environment and green areas may play a major role in promoting physical activity, thus decreasing the burden of chronic diseases, overweight and inactivity. However, the availability of green areas may not guarantee healthy levels of physical activity among the urban dwellers. It is therefore necessary to study how the perceived characteristics of green areas affect physical activity. Data from the EURO-URHIS 2 survey of residents of 13 cities across the UK were analyzed and a multivariable model was created in order to assess the association between their perceptions of the green areas in their neighbourhood and their engagement in physical activity. Results were adjusted for age, gender and other potential confounders. Those who felt unable to engage in active recreational activities in their local green spaces were significantly less likely to carry out moderate physical exercise for at least 60 min per week (adjusted OR: 0.50; 95% 0.37-0.68). Availability of green areas within walking distance did not affect engagement in physical activity. Other characteristics such as accessibility and safety may play an important role. This study showed that the presence of green space may not itself encourage the necessary preventative health behaviours to tackle physical inactivity in urban populations. Development of more appropriate green spaces may be required. Further research is needed to shed light on the types green spaces that are most effective. © The Author 2017. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Friendship Network Characteristics Are Associated with Physical Activity and Sedentary Behavior in Early Adolescence.

Science.gov (United States)

Marks, Jennifer; de la Haye, Kayla; Barnett, Lisa M; Allender, Steven

2015-01-01

There is limited understanding of the association between peer social networks and physical activity (PA), sedentary and screen-related behaviors. This study reports on associations between personal network characteristics and these important health behaviors for early adolescents. Participants were 310 students, aged 11-13 years, from fifteen randomly selected Victorian primary schools (43% response rate). PA and sedentary behaviors were collected via accelerometer and self-report questionnaire, and anthropometric measures via trained researchers. Participants nominated up to fifteen friends, and described the frequency of interaction and perceived activity intensity of these friends. Personal network predictors were examined using regression modelling for PA and sedentary/screen behavior. Perceived activity levels of friends, and friendships with very frequent interaction were associated with outside-of-school PA and/or sedentary/screen time. Differences according to sex were also observed in the association between network characteristics and PA and sedentary time. A higher number of friends and greater proportion of same sex friends were associated with boys engaging in more moderate-to-vigorous PA outside of school hours. PA intensity during school-day breaks was positively associated with having a greater proportion of friends who played sports for girls, and a greater proportion of male friends for boys. Friendship network characteristics are associated with PA and sedentary/screen time in late childhood/early adolescence, and these associations differ by sex. The positive influence of very active peers may be a promising avenue to strengthen traditional interventions for the promotion of PA and reduction in screen time.

Design and progress of the SPHINX in KAERI

International Nuclear Information System (INIS)

Kim, Hyung Rae; Kim, Hwan Teol; Song, Jin Ho; Kim, Hee Dong; Bae Yoon Yeong

2005-01-01

The SCWR (SuperCritical Water-cooled Reactor) is one of the six reactor candidates selected in the Gen-IV project, which aims at the development of new reactors with enhanced economy and safety. The SCWR is considered to be a feasible concept of new nuclear power plant if the existing technologies developed in fossil fuel fired plants and LWRs are incorporated together with additional researches on several disciplines such as materials, water chemistry, and safety. Among the research areas, heat transfer experiments under supercritical conditions are required for the proper prediction of thermal hydraulic phenomena, which are essential in the reactor core designs. A heat transfer test loop using carbon dioxide (CO 2 ) as a surrogate fluid has been constructed in KAERI. The test facility, named as SPHINX (Supercritical Pressure Heat transfer Investigation for NeXt generation), will be used for the study of heat transfer in a single tube, single rod, and rod bundle. The heat transfer correlations obtained from the SPHINX will be compared with the other correlations generated at Kyushu University and INL. This paper describes the design characteristics and progress of the SPHINX in KAERI. The construction of the facility is completed and a trial run is being conducted. The test and the data production are expected to start by April 2005

Design and progress of the SPHINX in KAERI

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyung Rae; Kim, Hwan Teol; Song, Jin Ho; Kim, Hee Dong; Bae Yoon Yeong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

2005-07-01

The SCWR (SuperCritical Water-cooled Reactor) is one of the six reactor candidates selected in the Gen-IV project, which aims at the development of new reactors with enhanced economy and safety. The SCWR is considered to be a feasible concept of new nuclear power plant if the existing technologies developed in fossil fuel fired plants and LWRs are incorporated together with additional researches on several disciplines such as materials, water chemistry, and safety. Among the research areas, heat transfer experiments under supercritical conditions are required for the proper prediction of thermal hydraulic phenomena, which are essential in the reactor core designs. A heat transfer test loop using carbon dioxide (CO{sub 2}) as a surrogate fluid has been constructed in KAERI. The test facility, named as SPHINX (Supercritical Pressure Heat transfer Investigation for NeXt generation), will be used for the study of heat transfer in a single tube, single rod, and rod bundle. The heat transfer correlations obtained from the SPHINX will be compared with the other correlations generated at Kyushu University and INL. This paper describes the design characteristics and progress of the SPHINX in KAERI. The construction of the facility is completed and a trial run is being conducted. The test and the data production are expected to start by April 2005.

Determining Topographic and Some Physical Characteristics of the Land in Artvin City and Investigating Relationship between These Characteristics with Land Cover

Directory of Open Access Journals (Sweden)

Ayşe Yavuz Özalp

2013-11-01

Full Text Available In this study, the aim was to determine topographic (elevation, slope, and aspect and some physical (Great Soil Groups (GSG and Land Use Capability Classes (LUCC characteristics of the land in Artvin and to reveal relations between these characteristics and land cover of the city that lies along the northeast border of Turkey and due to its natural resources, consists of several protected areas as well as many development projects -both planned and ongoing. Within this scope, areal and percentile distributions in respect to slope, aspect, elevation, GSG, LUCC and land cover were determined for eight towns of Artvin using digitized 1/25000 topographic and soil maps along with CORINE 2006 land cover map with the help of Geographical Information System (GIS. Then, distributions of chosen land use types (forest, agriculture, grassland/meadow were investigated according to the determined-ranges for the parameters of slope, aspect, elevation, GSG, and LUCC. The results showed that about 48.22% of Artvin’s whole land is between an elevation ranges of 1000 – 2000 m while 31.07% of the land lies above 2000 m. Moreover, average elevation of all the towns, except for Hopa, is over the country’s mean elevation of 1132 m and 81.25% of the city’s land consists of more than 30% slope, meaning that topography of the land in Artvin

An internet survey of the characteristics and physical activity of community-dwelling Australian adults with acquired brain injury: Exploring interest in an internet-delivered self-management program focused on physical activity.

Science.gov (United States)

Jones, Taryn M; Dean, Catherine M; Dear, Blake F; Hush, Julia M; Titov, Nickolai

2016-01-01

Individuals with acquired brain injury (ABI) are more likely to be physically inactive and experience barriers to accessing services to address inactivity. This study was designed to guide the development of an internet-delivered self-management program to increase physical activity after ABI. The aims of this study were to examine the current physical activity status of community-dwelling Australian adults with ABI, the barriers to physical activity they experience and to explore interest an internet-delivered self-management program aimed at increasing physical activity. An online survey of Australian adults with ABI was used to collect information about demographic characteristics; general health; emotional well-being; mobility and physical activity status, and satisfaction; barriers to physical activity; confidence in overcoming barriers, and; interest in an internet self-management program. Data were analyzed descriptively and correlational analyses examined relationships between variables. Data were analyzed from 59 respondents. Over half were not satisfied with their current physical activity status. The most frequently reported barriers were pain/discomfort, fatigue and fear, and confidence to overcome these barriers was very low. Interest in an internet-delivered self-management program was high (74%) and not related to the amount of physical activity, satisfaction with physical activity and mobility status or total number of barriers. Australian adults with ABI are not satisfied with their activity levels and experience barriers in maintaining their physical activity levels. Participants were interested in accessing an internet-delivered self-management program aimed at improving physical activity levels. Therefore such a program warrants development and evaluation. Copyright © 2016 Elsevier Inc. All rights reserved.

Anthropometric and physical fitness characteristics of female ...

African Journals Online (AJOL)

These included 24 university-level, 17 provincial-level, and 14 national team players. Anthropometric data included age, stature, body mass, sum of seven skinfolds and percentage body fat. The fitness characteristics included flexibility, strength, explosive power, muscular endurance, agility, speed and aerobic endurance.

Characteristics of Teacher Training in School-Based Physical Education Interventions to Improve Fundamental Movement Skills and/or Physical Activity: A Systematic Review.

Science.gov (United States)

Lander, Natalie; Eather, Narelle; Morgan, Philip J; Salmon, Jo; Barnett, Lisa M

2017-01-01

Fundamental movement skill (FMS) competence is positively associated with physical activity (PA). However, levels of both FMS and PA are lower than expected. Current reviews of interventions to improve FMS and PA have shown that many school-based programs have achieved positive outcomes, yet the maintenance of these interventions is variable. Teachers play a central role in the success and longevity of school-based interventions. Despite the importance of teacher engagement, research into the nature and quality of teacher training in school-based PA and FMS interventions has received little attention. The aim of this systematic review was to investigate the type and quantity of teacher training in school-based physical education PA and/or FMS interventions, and to identify what role teacher training had on the intervention outcome. A systematic search of eight electronic databases was conducted. Publication date restrictions were not implemented in any database, and the last search was performed on 1 March 2015. School physical education-based interventions facilitated by a school teacher, and that included a quantitative assessment of FMS competence and/or PA levels were included in the review. The search identified 39 articles. Eleven of the studies measured FMS, 25 studies measured PA and three measured both FMS and PA. Nine of the studies did not report on any aspect of the teacher training conducted. Of the 30 studies that reported on teacher training, 25 reported statistically significant intervention results for FMS and/or PA. It appears that teacher training programs: are ≥ 1 day; provide comprehensive subject and pedagogy content; are framed by a theory or model; provide follow-up or ongoing support; and measure teacher satisfaction of the training, are more effective at improving student outcomes in FMS and/or PA. However, the provision of information regarding the characteristics of the teacher training was largely inadequate. Therefore, it was

Do neighborhood economic characteristics, racial composition, and residential stability predict perceptions of stress associated with the physical and social environment? Findings from a multilevel analysis in Detroit.

Science.gov (United States)

Schulz, Amy J; Zenk, Shannon N; Israel, Barbara A; Mentz, Graciela; Stokes, Carmen; Galea, Sandro

2008-09-01

As the body of evidence linking disparities in the health of urban residents to disparate social, economic and environmental contexts grows, efforts to delineate the pathways through which broader social and economic inequalities influence health have burgeoned. One hypothesized pathway connects economic and racial and ethnic inequalities to differentials in stress associated with social and physical environments, with subsequent implications for health. Drawing on data from Detroit, Michigan, we examined contributions of neighborhood-level characteristics (e.g., poverty rate, racial and ethnic composition, residential stability) and individual-level characteristics (e.g., age, gender) to perceived social and physical environmental stress. We found that neighborhood percent African American was positively associated with perceptions of both social and physical environmental stress; neighborhood percent poverty and percent Latino were positively associated with perceived physical environmental stress; and neighborhood residential stability was negatively associated with perceived social environmental stress. At the individual level, whites perceived higher levels of both social and physical environmental stress compared to African American residents of the same block groups, after accounting for other variables included in the models. Our findings suggest the importance of understanding and addressing contributions of neighborhood structural characteristics to perceptions of neighborhood stress. The consistency of the finding that neighborhood racial composition and individual-level race influence perceptions of both social and physical environments suggests the continuing importance of understanding the role played by structural conditions and by personal and collective histories that vary systematically by race and ethnicity within the United States.

Chrome Tanning Leather of Giant Sea Perch Combined with Seed Extract Areca Nut on the Physical Characteristics

OpenAIRE

Bustami - Ibrahim; Ella - Salamah; Nurul - Hak; Ade Komalasari Suhendar

2014-01-01

Tanning is the process of converting raw hide protein to leather, which are stable, not easily decompose, and is suitable for a variety of uses. The use of vegetable based tanning materials in the leather tanning process has not been carried out. Vegetable based materials that were used are betel nuts. This plant contains tannin which is the main agent in the process of leather tanning. The aim of this study was to determine the physical characteristics of snapper leather treated with betel n...

Biopolymers to improve physical properties and leaching characteristics of mortar and concrete: A review

Science.gov (United States)

Olivia, M.; Jingga, H.; Toni, N.; Wibisono, G.

2018-04-01

The invention of environmentally friendly, high performance, and green material such as biopolymers marked an emerging trend for sustainable construction over the past decades. Biopolymer comprises of natural monomers and synthesized by plants or other organisms. The sustainable, biodegradable, and renewable biopolymers were used in concrete mixes to improve their physical and mechanical properties and durability. The aim of this paper is to provide a brief an overview of the impact of biopolymer addition into concrete and mortar mixes. Many studies on the influence of biopolymer on the properties of concrete and mortar by adding biopolymers at a certain proportion (usually less than one wt.%) to the concrete or mortar mixes, and the heavy metal leaching, rheological, and mechanical properties of the mixes were conducted. Biopolymers included in this review are chitosan (CH), xanthan gum (XG), guar gum (GG), lignosulphonate (LS), and cellulose ethers (CE). Data from previous studies showed that the addition of certain types of biopolymer into concrete and mortar mixes improve workability, water retention, and compressive strength by up to 30 percent. Chitosan strengthens heavy metal encapsulation in the mortar and neutralizes the negative impact of heavy metal on the mortar properties and environment. To sum up, the use of biopolymers improve physical properties and leaching characteristics of mortar and concrete.

Nuclear Physics Constraints on the Characteristics of Astrophysical Thermonuclear Flashes

International Nuclear Information System (INIS)

Truran, James W

2012-01-01

We review the nuclear physics that is associated with the outbursts of Type Ia (thermonuclear) supernova explosions and with the thermonuclear runaway events that define the outbursts of both classical novae and recurrent novae. We describe how distinguishing characteristics of these two classes of astrophysical explosion are strongly dependent both upon fuel ignition in degenerate matter and upon the rates of critical charged-particle reaction rates and weak interaction rates. In this centennial celebration of the important contributions of Rutherford and his collaborators to our understanding of the structure of the nucleus of an atom, it is quite interesting to note the evolution of the α-particle scattering experiments described in Rutherford's seminal paper (Rutherford 1911) to current studies of α-particle induced reactions and their defining roles in studies of stellar, nova, and supernova nucleosynthesis. We identify and discuss for example: (1) the manner in which (α, p) reactions in proximity to the Z = N line carry the major flows from 12 C and 16 O to 56 Ni in Type Ia supernovae; and (2) the critical role of the 15 O(α, γ) 19 Ne reaction in possibly effecting 'breakout' of the Hot CNO cycles at the highest temperatures achievable in Classical Novae. In this contribution, we first review the current status our understanding of Type Ia supernova events and then that of Classical Novae.

Physical characteristics of experienced and junior open-wheel car drivers.

Science.gov (United States)

Raschner, Christian; Platzer, Hans-Peter; Patterson, Carson

2013-01-01

Despite the popularity of open-wheel car racing, scientific literature about the physical characteristics of competitive race car drivers is scarce. The purpose of this study was to compare selected fitness parameters of experienced and junior open-wheel race car drivers. The experienced drivers consisted of five Formula One, two GP2 and two Formula 3 drivers, and the nine junior drivers drove in the Formula Master, Koenig, BMW and Renault series. The following fitness parameters were tested: multiple reactions, multiple anticipation, postural stability, isometric upper body strength, isometric leg extension strength, isometric grip strength, cyclic foot speed and jump height. The group differences were calculated using the Mann-Whitney U-test. Because of the multiple testing strategy used, the statistical significance was Bonferroni corrected and set at P < 0.004. Significant differences between the experienced and junior drivers were found only for the jump height parameter (P = 0.002). The experienced drivers tended to perform better in leg strength (P = 0.009), cyclic foot speed (P = 0.024) and grip strength (P = 0.058). None of the other variables differed between the groups. The results suggested that the experienced drivers were significantly more powerful than the junior drivers: they tended to be quicker and stronger (18% to 25%) but without statistical significance. The experienced drivers demonstrated excellent strength and power compared with other high-performance athletes.

Investigation of physical image characteristics and phenomenon of edge enhancement by phase contrast using equipment typical for mammography

International Nuclear Information System (INIS)

Yamazaki, Asumi; Ichikawa, Katsuhiro; Kodera, Yoshie

2008-01-01

A technique called phase contrast mammography (PCM) has only recently been applied in clinical examination. In this application, PCM images are acquired at a 1.75x magnification using an x-ray tube for clinical use, and then reduced to the real size of the object by image processing. The images showed enhanced object edges; reportedly, this enhancement occurred because of the refraction of x rays through a cylindrical object. The authors measured the physical image characteristics of PCM to compare the image characteristics of PCM with those of conventional mammography. More specifically, they measured the object-edge-response characteristics and the noise characteristics in the spatial frequency domain. The results revealed that the edge-response characteristics of PCM outperformed those of conventional mammography. In addition, the characteristics changed with the object-placement conditions and the object shapes. The noise characteristics of PCM were better than those of conventional mammography. Subsequently, to verify why object edges were enhanced in PCM images, the authors simulated image profiles that would be obtained if the x rays were refracted and totally reflected by using not only a cylindrical substance but also a planar substance as the object. So, they confirmed that the object edges in PCM images were enhanced because x rays were refracted irrespective of the object shapes. Further, they found that the edge enhancements depended on the object shapes and positions. It was also proposed that the larger magnification than 1.75 in the commercialized system might be more suitable for PCM. Finally, the authors investigated phase-contrast effects to breast tissues by the simulation and demonstrated that PCM would be helpful in the diagnoses of mammography.

Improving Safety, Economic, Substantiality, and Security of Nuclear Energy with Canadian Super-Critical Water-cooled Reactor Concept

International Nuclear Information System (INIS)

Hamilton, Holly; Pencer, Jeremy; Yetisir, Metin; Leung, Laurence

2012-01-01

Super-Critical Water-cooled Reactor is one of the six design concepts being developed under the Generation IV International Forum. It is the only concept evolving from the water-cooled reactors and taking advantages of the balance-of-plant design and operation experience of the fossil-power plants. Canada is developing the SCR concept from the well-established pressure-tube reactor technology. The Canadian SCWR maintains modular design approach using relative small fuel channels with the separation of coolant and moderator. It is equipped with an advanced fuel channel design that is capable to transfer decay heat from the fuel to the moderator under the long-term cooling stage. Coupled with the advanced passive-moderator cooling system, cooling of fuel and fuel channel is continuous even without external power or operator intervention. The Canadian SCWR is operating at a pressure of 25 MPa with a core outlet temperature of 625 deg. C. This has led to a drastic increase in thermal efficiency to 48% from 34% of the current fleet of reactors (a 40% rise in relative efficiency). With the high core outlet temperature, a direct thermal cycle has been adopted and has led to simplification in plant design attributing to the cost reduction compared to the current reactor designs. The Canadian SCWR adopts the advanced Thorium fuel cycle to enhance the substantiality, economic, and security. than uranium in the world (estimated to be three times more). This provides the long-term fuel supply. Thorium's price is stable compared to uranium and is consistently lower than uranium. This would maintain the predictability and economic of fuel supply. Thorium itself is a non-fissile material and once irradiated requires special handling. This improves proliferative resistance. The objective of this paper is to highlight these improvements in generating nuclear energy with the Canadian SCWR

Future generations of CANDU: advantages and development with passive safety

International Nuclear Information System (INIS)

Duffey, R. B.

2006-01-01

Atomic Energy of Canada Limited (AECL) advances water reactor and CANDLT technology using an evolutionary development strategy. This strategy ensures that innovations are based firmly on current experience and keeps our development programs focused on one reactor concept, reducing risks, development costs, and product development cycle times. It also assures our customers that our products will never become obsolete or unsupported, and the continuous line of water reactor development is secure and supported into the future. Using the channel reactor advantage of modularity, the subdivided core has the advantage of passive safety by heat removal to the low- pressure moderator. With continuous improvements, the Advanced CANDU Reactor TM (ACR-1000TM) concept will likely remain highly competitive for a number of years and leads naturally to the next phase of CANDU development, namely the Generation IV CANDU -SCWR concept. This is conventional water technology, since supercritical boilers and turbines have been operating for some time in coal-fired power plants. Significant cost, safety, and performance advantages would result from the CANDU-SCWR concept, plus the flexibility of a range of plant sizes suitable for both small and large electric grids, and the ability for co-generation of electric power, process heat, and hydrogen. In CANDU-SCWR, novel developments are included in the primary circuit layout and channel design. The R and D in Canada is integrated with the Generation IV international Forum (GIF) plans, and has started on examining replaceable insulating liners that would ensure channel life, and on providing completely passive reactor decay heat removal directly to the moderator heat sink without forced cooling. In the interests of sustainability, hydrogen production by a CANDU- SCWR is also be included as part of the system requirements, where the methods for hydrogen production will depend on the outlet temperature of the reactor

What hinders healthcare professionals in promoting physical activity towards cancer patients? The influencing role of healthcare professionals' concerns, perceived patient characteristics and perceived structural factors.

Science.gov (United States)

Haussmann, Alexander; Gabrian, Martina; Ungar, Nadine; Jooß, Stefan; Wiskemann, Joachim; Sieverding, Monika; Steindorf, Karen

2018-05-09

Despite a large body of evidence showing that physical activity (PA) is beneficial to patients with cancer, healthcare professionals (HCPs) are promoting it too scarcely. Factors that hinder HCPs from promoting PA have remained understudied so far. Using a qualitative approach, this study aimed at a comprehensive description of influencing factors for HCPs' PA promotion behaviour and at identifying the reasons and mechanisms behind them. Semi-structured interviews with 30 HCPs were undertaken with a focus on concerns, patient characteristics and structural factors. Answers were analysed using thematic analysis. Results revealed that HCPs had concerns regarding a physical overexertion and psychological stress for patients with cancer. A patient's physical condition and the assumed interest in PA, often derived from former PA, turned out to be the most crucial patient characteristics influencing if PA is addressed. Structural factors relevant for PA promotion pertained to in-house structures, HCPs' workload, timing and coordination, information material for HCPs and patients and availability of exercise programs. In conclusion, this study revealed undetected concerns of HCPs and underlined the relevance of patient characteristics and structural conditions for HCPs' PA promotion towards patients with cancer. A broader perspective is needed to assess these factors in their influence on HCPs' PA promotion. © 2018 John Wiley & Sons Ltd.

The physical characteristics of the sediments on and surrounding Dauphin Island, Alabama

Science.gov (United States)

Ellis, Alisha M.; Marot, Marci E.; Smith, Christopher G.; Wheaton, Cathryn J.

2017-06-20

Scientists from the U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center collected 303 surface sediment samples from Dauphin Island, Alabama, and the surrounding water bodies in August 2015. These sediments were processed to determine physical characteristics such as organic content, bulk density, and grain-size. The environments where the sediments were collected include high and low salt marshes, washover deposits, dunes, beaches, sheltered bays, and open water. Sampling by the USGS was part of a larger study to assess the feasibility and sustainability of proposed restoration efforts for Dauphin Island, Alabama, and assess the island’s resilience to rising sea level and storm events. The data presented in this publication can be used by modelers to attempt validation of hindcast models and create predictive forecast models for both baseline conditions and storms. This study was funded by the National Fish and Wildlife Foundation, via the Gulf Environmental Benefit Fund.This report serves as an archive for sedimentological data derived from surface sediments. Downloadable data are available as Excel spreadsheets, JPEG files, and formal Federal Geographic Data Committee metadata.

Temperature feedback effects in a supercritical water reactor concept with multiple heat-up steps

International Nuclear Information System (INIS)

Barragan-Martinez, A.M.; Espinosa-Paredes, G.; Vazquez-Rodriguez, A.; Martin-del-Campo, C.; Francois, J.L.

2014-01-01

The Supercritical Water Cooled Reactor (SCWR) is one of the most promising and innovative designs selected by the Generation IV International Forum. One of the concepts being studied is the High Performance Light Water Reactor (HPLWR), which is the European version of the SCWR. In this paper we present the numerical analysis of the behavior of a HPLWR with temperature feedback effects. The neutronic process, the heat transfer in the fuel rod and the thermalhydraulics in the core of the HPLWR were considered in this study. The neutronic calculations were performed with HELIOS-2 and the obtained results were used to evaluate the reactivity due to fuel temperature and supercritical water density. (author)

Temperature feedback effects in a supercritical water reactor concept with multiple heat-up steps

Energy Technology Data Exchange (ETDEWEB)

Barragan-Martinez, A.M., E-mail: albrm29@yahoo.com [Universidad Nacional Autonoma de Mexico, Departamento de Sistemas Energeticos, Facultad de Ingenieria, Jiutepec, Mor (Mexico); Espinosa-Paredes, G.; Vazquez-Rodriguez, A., E-mail: gepe@xanum.uam.mx, E-mail: vara@xanum.uam.mx [Universidad Autonoma Metropolitana-Iztapalapa, Area de Ingenieria en Rescursos Energeticos, Col. Vicentina (Mexico); Martin-del-Campo, C.; Francois, J.L., E-mail: cecilia.martin.del.campo@gmail.com, E-mail: juan.louis.francois@gmail.com [Universidad Nacional Autonoma de Mexico, Departamento de Sistemas Energeticos, Facultad de Ingenieria, Jiutepec, Mor (Mexico)

2014-07-01

The Supercritical Water Cooled Reactor (SCWR) is one of the most promising and innovative designs selected by the Generation IV International Forum. One of the concepts being studied is the High Performance Light Water Reactor (HPLWR), which is the European version of the SCWR. In this paper we present the numerical analysis of the behavior of a HPLWR with temperature feedback effects. The neutronic process, the heat transfer in the fuel rod and the thermalhydraulics in the core of the HPLWR were considered in this study. The neutronic calculations were performed with HELIOS-2 and the obtained results were used to evaluate the reactivity due to fuel temperature and supercritical water density. (author)

Most Physically Educated Contest

Science.gov (United States)

Mercier, Kevin; Howard, Thomas

2018-01-01

It is seldom that the accomplishments of secondary physical education students are celebrated. The Most Physically Educated Contest was developed to allow students from several school districts to gather for appropriate competition and to display the characteristics of physical literacy attained from participation in high-quality physical…

Relation between leaching characteristics of heavy metals and physical properties of fly ashes from typical municipal solid waste incinerators.

Science.gov (United States)

Ni, Peng; Li, Hailong; Zhao, Yongchun; Zhang, Junying; Zheng, Chuguang

2017-09-01

Due to the alkalinity and high concentration of potentially hazardous heavy metals, fly ash from a municipal solid waste (MSW) incinerator is classified as hazardous waste, which should be of particular concern. Physical and chemical characterizations of the contrasted fly ashes were investigated to explore the relation between leaching characteristics of heavy metals and physical properties of fly ashes. The results showed that CaClOH, NaCl, Ca(OH) 2 , KCl and SiO 2 were primary mineral compositions in the MSWI fly ashes, and the particle size distribution of fly ash ranged between 10 μm and 300 μm. The smaller the particle size distribution of fly ash, the larger the BET-specific surface area, which was beneficial to the leaching of heavy metals. As a result of various pores, it easily accumulated heavy metals as well. The leaching tests exhibited a high leachability of heavy metals and the leaching concentration of Pb in almost all of the fly ash samples went far beyond the Standard for Pollution Control on the Landfill Site of Municipal Solid Waste. Thereupon, it is necessary to establish proper disposal systems and management strategies for environmental protection based on the characteristics of MSW incineration (MSWI) fly ash in China.

Reactor core and passive safety systems descriptions of a next generation pressure tube reactor - mechanical aspects

Energy Technology Data Exchange (ETDEWEB)

Yetisir, M.; Gaudet, M.; Rhodes, D.; Hamilton, H.; Pencer, J. [Atomic Energy of Canada Limited, Chalk River, ON (Canada)

2014-07-01

Canada has been developing a channel-type supercritical water-cooled nuclear reactor concept, often called the Canadian SCWR. The objective of this reactor concept is to meet the technology goals of the Generation IV International Forum (GIF) for the next generation nuclear reactor development, which include enhanced safety features (inherent safe operation and deploying passive safety features), improved resource utilization, sustainable fuel cycle, and greater proliferation resistance than Generation III nuclear reactors. The Canadian SCWR core concept consists of a high-pressure inlet plenum, a separate low-pressure heavy water moderator contained in a calandria vessel, and 336 pressure tubes surrounded by the moderator. The reactor uses supercritical water as a coolant, and a direct steam power cycle to generate electricity. The reactor concept incorporates advanced safety features such as passive core cooling, long-term decay heat rejection to the environment and fuel melt prevention via passive moderator cooling. These features significantly reduce core damage frequency relative to existing nuclear reactors. This paper presents a description of the design concepts for the Canadian SCWR core, reactor building layout and the plant layout. Passive safety concepts are also described that address containment and core cooling following a loss-of coolant accident, as well as long term reactor heat removal at station blackout conditions. (author)

Emotional, physical, and social needs among 0-5-year-old children displaced by the 2010 Chilean earthquake: associated characteristics and exposures.

Science.gov (United States)

Arbour, MaryCatherine; Murray, Kara A; Yoshikawa, Hirokazu; Arriet, Felipe; Moraga, Cecilia; Vega, Miguel Angel Cordero

2017-04-01

An 8.8-magnitude earthquake occurred off the coast of Chile on 27 February 2010, displacing nearly 2,000 children aged less than five years to emergency housing camps. Nine months later, this study assessed the needs of 140 displaced 0-5-year-old children in six domains: caregiver stability and protection; health; housing; nutrition; psychosocial situation; and stimulation. Multivariate regression was applied to examine the degree to which emotional, physical, and social needs were associated with baseline characteristics and exposure to the earthquake, to stressful events, and to ongoing risks in the proximal post-earthquake context. In each domain, 20 per cent or fewer children had unmet needs. Of all children in the sample, 20 per cent had unmet needs in multiple domains. Children's emotional, physical, and social needs were associated with ongoing exposures amenable to intervention, more than with baseline characteristics or epicentre proximity. Relief efforts should address multiple interrelated domains of child well-being and ongoing risks in post-disaster settings. © 2017 The Author(s). Disasters © Overseas Development Institute, 2017.

Recreational road runners: injuries, training, demographics and physical characteristics

Directory of Open Access Journals (Sweden)

Joris Pazin

2008-07-01

Full Text Available http://dx.doi.org/10.5007/1980-0037.2008v10n3p277 The purpose of this study was to study recreational road runners in order to identify: their physical characteristics, demographics, running profile (training distance, frequency, duration, and experience and the prevalence of injuries and their association with age, running profile, and other sports practiced. Body mass, height (from which BMI was calculated and waist circumference were also measured. The sample of runners was composed of 115 men who participated in two events organized in Santa Catarina State, Brazil, in 2006: 22nd Maratona de Blumenau and 5th Desafio Praias e Trilhas (Florianópolis. The data were analyzed with descriptive statistics and the chi-square test to identify associations between injury prevalence and other variables (p<.05. The majority of the runners were aged between 18 and 50 years (63.2%, with 36.8% older than 50 years. In terms of educational level 24.3% had attended only elementary school, 35.4% high school, and 40% degree courses. Monthly family income (based on Brazilian minimum wage in Reais - R$ 380.00 varied between R$ 300 and R$ 999 for 23.3% of the runners, between R$ 1000 and R$ 2900 for 45.2%, and above R$ 3000 for 31.3% of them. Seventy two percent of them have been running regularly for more than 6 years, and 57% had received specialist guidance for running; 56.5% run more than 64 km/week. The injury prevalence for one year was 37.7%; BMI and waist circumference were within healthy limits. No associations were found between injury prevalence and other variables studied.

Observations and Inferred Physical Characteristics of Compact Intracloud Discharges

International Nuclear Information System (INIS)

Argo, P.E.; Eack, K.B.; Holden, D.N.; Massey, R.S.; Shao, X.; Smith, D.A.; Wiens, K.C.

1999-01-01

Compact intracloud discharges (CIDS) represent a distinct class of electrical discharges that occur within intense regions of thunderstorms. They are singular discharges that produce brief (typically 3 ampersand micro;s in duration) broadband RF emissions that are 20 to 30 dB more powerful than radiation from all other recorded lightning processes in the HF and VHF radio spectrum. Far field electric field change recordings of CIDS consist of a single, large-amplitude bipolar pulse that begins to rise during the RF-producing phase of the CID and typically lasts for 20 ampersand micro;s. During the summer of 1998 we operated a 4-station array of electric field change meters in New Mexico to support FORTE satellite observations of transient RF and optical sources and to learn more about the phenomenology and physical characteristics of CIDS. Over 800 CIDS were detected and located during the campaign. The events were identified on the basis of their unique field change waveforms. CID source heights determined using the relative delays of ionospherically reflected source emissions were typically between 4 and 11 km above ground level. Events of both positive and negative polarity were observed with events' of initially- negative polarity (indicative of discharges occurring between underlying positive and overlying negative charge) occurring at slightly higher altitudes. Within CID field change waveforms the CID pulse was often followed within a few ms by one or more smaller-amplitude pulses. We associate these subsequent pulses with the initial activity of a ''normal'' intracloud flash, the inference being that some fraction of the time, a CID initiates an intracloud lightning flash

Excessive physical demands in modern worklife and characteristics of work and living conditions of persons at risk.

Science.gov (United States)

Karlqvist, Lena K; Härenstam, Annika; Leijon, Ola; Schéele, Patrik

2003-10-01

This study attempted to identify work and leisure-time conditions and life-style factors associated with excess metabolic levels (metabolic demands exceeding one-third of a person's aerobic capacity) at work among men and women. The study focused upon psychological, ergonomic, and physically loading factors and chemical and physical environmental conditions. Data were obtained through self-reports, interviews, workplace analyses, technical measurements, and observations. Gender-specific calculations were used in univariate analyses and in stepwise logistic regression models for excess metabolic level. Twenty-seven percent of the men and twenty-two percent of the women worked at an excess metabolic level during their workday. Awkward work postures, heavy manual materials handling, high circulatory strain, chemical exposures, noise levels, much routine work, and many obstacles to job performance characterized their work conditions. The women had low skill discretion and more often atypical workhours, while the men showed high circulatory strain during leisure-time activities. Important negative life-style factors were a high consumption of alcohol for the men and a high body mass index and no or little regular physical exercise for the women. Metabolic demands in worklife today remain high. The women who exceeded the recommended metabolic level at work in this study were characterized by low pay, poor health, and children at home, in addition to high physical load and psychosocial strain at work. These characteristics indicate a group with few possibilities to leave a hazardous job for a less physically demanding one. The men who worked at an excess metabolic level seemed to be characterized more by a life-style common in some male-dominated work cultures with monotonous work.

Importance of characteristics and modalities of physical activity and exercise in the management of cardiovascular health in individuals with cardiovascular risk factors

DEFF Research Database (Denmark)

Vanhees, L; Geladas, N; Hansen, D

2012-01-01

In a previous paper, as the first of a series of three on the importance of characteristics and modalities of physical activity (PA) and exercise in the management of cardiovascular health within the general population, we concluded that, in the population at large, PA and aerobic exercise capacity...

Effect of different post harvest treatments on physical characteristics of custard apple fruits

International Nuclear Information System (INIS)

Singh, Alpana; Chouksey, Swati; Deshmukh, Reena; Thakur, R.S.

2008-01-01

The study was conducted with the objective to see the effect of different post harvest treatments on physical characteristics of custard apple fruits. Fruits were treated with different doses of gamma radiation ranging from 0.25 to 1.75 kGy in combination with antioxidant i.e. Benzyl Adenine (BA) at the rate of 50 and 100 ppm and stored for 12 days at ambient temperature (25 ± 5 deg C, RH 90 ± 2 %) during winter season. Fruits treated with low doses of gamma radiation i.e. upto 1.00 kGy along with 50 ppm benzyl adenine extended the shelf life of fruits up to 6 days as compared to untreated fruits as well as fruits treated with higher doses of radiation. A decreasing trend in physiological weight loss (PLW) and percentage of marketable fruits was observed with increase in radiation doses. This promises to provide advantage to producers for transhipment of custard apple fruits in good and acceptable condition. (author)

Medically unexplained physical symptoms and work functioning over 2 years: their association and the influence of depressive and anxiety disorders and job characteristics

NARCIS (Netherlands)

Boeft, M. den; Twisk, J.W.; Hoekstra, T.; Terluin, B.; Penninx, B.W.; Wouden, J.C. van der; Numans, M.E.; Horst, H.E. van der

2016-01-01

BACKGROUND: Medically unexplained physical symptoms (MUPS) are highly prevalent and may affect work functioning. In this study we aimed to assess the longitudinal association between MUPS and work functioning over 2 years and the influence of job characteristics and depressive and anxiety disorders

Levels of inclusion in cassava bagasse chicken feed of slow growth: physical and chemical characteristics of meat

Directory of Open Access Journals (Sweden)

Aline Ferreira Amorim

2015-06-01

Full Text Available The purpose of this study the effect of inclusion levels (0, 10, 20 and 30% of cassava bagasse (BM to the diet on the physical and chemical parameters of raw and cooked meat thigh , drumstick and breast of chicken was to evaluate cutting hillbilly kind of lineage Label rouge® slaughtered at 84 days of age . Analyzes were performed in the laboratory of Animal Nutrition , Universidade Federal do Tocantins – UFT, Escola de Medicina Veterinária e Zootecnia , Campus Araguaína . Forty chicken carcasses, which were divided into half-carcases, half-carcases and 10 for analysis of the chemical composition of raw meat and the other 10 half-carcasses for analysis of chemical composition of cooked meat , they are included in these analyzes the crude protein (CP, ether extract ( EE, dry matter (DM and ash (CZ, with base on the percentage of dry matter, in addition to gross energy (GE and cooking losses. Analyzes were also conducted of the physical attributes of meat (color, pH and texture other 20 half-carcasses. The inclusion of BM in the diet of broilers caipira type cut and cooking affected (P <0.05 the chemical characteristics of meat. Observed in thigh meat linear reduction in the deposition of CZ and linear increase in deposition of PB. Drumstick meat in CP content increased up to the level of 17.22% inclusion of BM corresponding to the deposition of 84.21% CP; and lower levels of EE (19.21% was found in the estimated level of 21.33% inclusion of BM. In breast meat was observed deposition of 29.56% with 2.35% DM inclusion of BM deposition and 88.56% to 13.46% of CP inclusion of BM. However the physical characteristics of meat were not influenced by the levels of inclusion of BM. It is recommended, with base on the chemical composition of the meat, to use up the 20% level of inclusion of BM.

A COMPARATIVE STUDY BETWEEN TALENTED YOUNG GREEK AND GERMAN HANDBALL PLAYERS IN SOME PHYSICAL AND ANTHROPOMETRIC CHARACTERISTICS

Directory of Open Access Journals (Sweden)

H. Galal El-Din

2011-11-01

Full Text Available This international comparative study between talented young handball players in Germany and Greece investigated specific physical and anthropometric characteristics. This investigation of both elite profiles will allow us to determine the differences in the selection system for elite young handball players between the two countries. One hundred and sixty-two players participated in this study, 88 Greek young male players and 74 German young male players. For anthropometric tests the players were measured for body height, body mass and body mass index, arm span, hand length and hand spread. Physical fitness measurements were 30 m sprint, standing long jump, sit and reach flexibility, and 20 m shuttle run test. The results of this study demonstrate that Greek players were taller and heavier (p<0.01, had longer arm span and hand length (p<0.01, and performed better in 30 m sprint (p<0.01, standing long jump (p<0.01 and aerobic capacity (p<0.01. German players outperform in hand spread (p=0.03. While some of these differences can be explained by the different strategies and training methods, and also the training environment, the results do have important implications and effects in the physical condition of junior players.

Soymilk plain beverages: correlation between acceptability and physical and chemical characteristics

Directory of Open Access Journals (Sweden)

Marcela Moreira Terhaag

2013-06-01

Full Text Available The objective of the research was to relate the physical and chemical characteristics of soymilk plain beverages to its sensory acceptance. Five commercial products and a new product formulated based on the less accepted sample were used. The overall acceptance was evaluated by 102 assessors using a 10-point hybrid hedonic scale. The hedonic scores ranged from 3.8 (sample E to 7.0 (A. Most assessors (55% preferred sample A, which was viscous (26.6 cp, dark (L* = 77.7, and slightly acidic (pH = 6.6. Sample C, which had lower solid content and higher acidity, was preferred by 29% of the assessors. These two beverages showed the greatest commercial potential of the products analyzed. The least-accepted sample (E, preferred by 8% of the assessors, had a lighter color (L* = 96.8, lower viscosity (13.5 cp, higher lipid content (2.2 g/100 g, and less protein (1.68 g/100 g than the other products evaluated. A reformulation of the least preferred product (E with the addition of maltodextrin and also vanilla and milk flavors increased its acceptance, yielding an average score of 7.2. Overall, it was observed that a soymilk plain beverage with higher viscosity, darker color, and higher protein content best meets consumer expectations.

Physical Education-in-CLIL tasks. Determining tasks characteristics through the analysis of the diaries

Directory of Open Access Journals (Sweden)

Josep Coral Mateu

2013-07-01

Full Text Available This article focuses on the characteristics of Physical Education-in-CLIL (PE-in-CLIL tasks. CLIL (Content and Language Integrated Learning is a teaching approach which uses foreign language as a tool to enhance the subject learning process. We connect PE-in-CLIL with key competences and we introduce the CLIL 4Cs framework. We establish the aims of the study, that is; to describe the features of tasks which are most suitable to PE-in-CLIL and identify integrated tasks which appeal most to learners. We use Action-Research and we collect data through diaries. The participants of the study were twenty-six learners of 5th grade of primary school. We described the strategies of rigour and quality applied and we analysed data using a qualitative data analysis software programme (NVivo. In the results, we identify both the tasks that appeal to students and the tasks that are developed successfully. In the conclusions, we provide teaching guidelines to plan successful PE-in-CLIL tasks that appeal to students. At this point, we emphasise tasks that combined both cooperative learning and oracy with motor activity and games. We also declare the necessity of incorporating scaffolding strategies in order to accommodate students’ linguistic needs and facilitate tasks development. Future CLIL research possibilities emerge in the Physical Education field of work.

Chemical and physical characteristics of local lecithin in comparison with some other food emulsifiers

Directory of Open Access Journals (Sweden)

El-Shattory, Y.

1999-08-01

Full Text Available The chemical and physical characteristics of local lecithin and other food emulsifiers (Emulfuid E, Triodan R 90, Panodan 150 and Glycerol mono stéarate were studied. The characteristics of these emulsifiers studied were solubility, hydrophile-lipophile balance (HLB, stability index (SI, fatty acid composition and infrared spectrum. The results obtained showed that Emulfuid E and local lecithin were mixture of lecithins and phosphatidyl ethanol-amine. In addition, Triodan R 90 was a polyglycerol ester of ricinoleic acid, Panodan 150 was a blend of mono and diglycerides, and G.M.S. was a monoglycerol ester of stearic acid.

Se estudiaron las características químicas y físicas de lecitina local y otros emulsionantes alimentarios (Emulfuid E, Triodan R 90, Panodan 150 y Monoestearato de glicerol. Las características de estos emulsionantes estudiados fueron solubilidad, balance hidrófilo-lipófilo (HLB, índice de estabilidad (SI, composición en ácidos grasos y espectros de infrarrojo. Los resultados obtenidos mostraron que Emulfuid E y lecitina local fueron mezclas de lecitinas y fosfatidil etanolamina. Por otro lado, Triodan R 90 fue ester poliglicerídico del ácido ricinoleico, Panodan 150 una mezcla de mono y diglicéridos y G.M.S. un éster monoglicerídico del ácido esteárico.

Investigation for calculation methods used in analyzing the physics characteristics of nuclear power reactor

International Nuclear Information System (INIS)

Nguyen Tuan Khai; Hoang Van Khanh; Phan Quoc Vuong; Tran Viet Phu; Tran Vinh Thanh; Nguyen Thi Mai Huong; Nguyen Thi Dung; Le Tran Chung; Nguyen Minh Tuan; Tran Quoc Duong

2014-01-01

The project aims at nuclear human resource development and enhancement in research capability in reactor physics and kinetics at Nuclear Energy Center (Institute for Nuclear Science and Technology) and Nuclear Reactor Center (Nuclear Research Institute, Dalat). The main research items of the project can be summarized as follows: i) Considering possibility on using modern calculation techniques and methods in investigating neutronic characteristics and neutronics-thermal hydraulics coupling. This item is proposed to carry out based on international collaboration with Prof. Le Trong Thuy, San Jose University, US; ii) Carrying out the collaborative activities in research and training between Nuclear Energy Center (Institute for Nuclear Science and Technology) and Nuclear Reactor Center (Nuclear Research Institute, Dalat); iii) Opening two-week training course on nuclear reactor engineering (25 Nov - 12 Dec 2013) in collaboration with Japan Atomic Energy Agency (JAEA). (author)

Clinical databases in physical therapy.

NARCIS (Netherlands)

Swinkels, I.C.S.; Ende, C.H.M. van den; Bakker, D. de; Wees, Ph.J van der; Hart, D.L.; Deutscher, D.; Bosch, W.J.H. van den; Dekker, J.

2007-01-01

Clinical databases in physical therapy provide increasing opportunities for research into physical therapy theory and practice. At present, information on the characteristics of existing databases is lacking. The purpose of this study was to identify clinical databases in which physical therapists

Exposure to Physical Activity Resources by Neighborhood Sociodemographic Characteristics in Copenhagen

DEFF Research Database (Denmark)

Svastisalee, Chalida; Schipperijn, Jasper; Holstein, Bjørn Evald

2012-01-01

Background: To investigate socioeconomic patterning of physical activity resources in Copenhagen. Methods: We used multivariate logistic regression analysis to examine the association between physical activity-supportive resources (public open space (POS), cycling and walking paths, sports.......51; CI: 0.31-0.83) but more likely to have POS (OR = 1.40; CI: 1.15-1.70) and paths (OR = 1.52; CI: 1.25-1.85). Conclusions: Residents living in areas with high proportions of low education or young children are likely to have high exposure to physical activity resources. Exposure to physical activity...... resources in Copenhagen may not explain the inequalities in physical activity behavior. Further examination of exposure to built environment resources is warranted....

The Main Physical-Chemical Characteristics of Smoked Sausage

Directory of Open Access Journals (Sweden)

Corina Iuliana Costescu

2015-05-01

Full Text Available The paper presents the organoleptic and physical-chemical quality of smoked sausage, produced by a manufacturer in the western part of Romania. The organoleptic examination highlighted: product shape, exterior and in section aspect, consistency, color, taste and flavor. The physical-chemical examination highlighted the content of moisture, fat, sodium chloride, nitrites and easy hydrolyzed nitrogen. Water content was under the maximum admitted limit of 58%. Medium fat value was 32.24%, by 5.76% under the 38% maximum limit. Medium sodium chloride content was 2.1%, under the maximum admitted limit of 3%. Easy hydrolyzed nitrogen registered a medium value of 26.71 mg NH3/100g product under the 45% maximum admitted limit. Nitrites content was 5.18 ppm, under the 7 ppm imposed limit.

Effect of pozzolans with different physical and chemical characteristics on concrete properties

Directory of Open Access Journals (Sweden)

Paiva, H.

2016-06-01

Full Text Available The durability of concrete structures is an important issue nowadays. Specifically in the case of reinforced concrete bridges or other infrastructures one of the main form of environmental attack is the penetration of chloride ions, which leads to corrosion of concrete steel reinforcement. This study aims to evaluate the effect of the introduction of metakaolin and diatomite, two chemically and physically different pozzolans, on the resistance of concrete to the penetration of chlorides but also the effect on other properties of concrete, namely, its compressive strength and its porosity distribution. The results of this study show that the pozzolans physical and chemical characteristics have a strong influence on the pozzolans behavior and, consequently, on the concrete properties.La durabilidad de las estructuras de hormigón es un tema importante hoy en día. En concreto, en el caso de los puentes de hormigón armado u otras infraestructuras, el principal factor de agresión medioambiental es la penetración de iones cloruro, lo que conduce a la corrosion del acero de refuerzo del hormigón. Este estudio tiene como objetivo evaluar el efecto de la introducción de metacaolín y diatomita, dos puzolanas química y físicamente diferentes, sobre la resistencia del hormigón a la penetración de cloruros, y también sobre otras de sus propiedades como la distribución de su porosidad o su resistencia a compresión. Los resultados de este estudio muestran que las características fisicoquímicas de las puzolanas tienen una fuerte influencia en su comportamiento y en consecuencia, en las propiedades del hormigón.

Physical Performance and Anthropometric Characteristics of Male South African University Soccer Players

Directory of Open Access Journals (Sweden)

Kubayi Alliance

2017-12-01

Full Text Available Soccer is the most popular sport worldwide. Despite its global acclaim, scientific studies of soccer have tended to focus on tactics and techniques, thereby neglecting the physical and physiological profile of the players. Therefore, the purpose of this study was to examine physical and anthropometric characteristics of male South African university soccer players. Twenty-seven male soccer players aged 19 to 24 (mean age: 22.1 years; s = 1.5 years volunteered to participate in the study. The results showed that goalkeepers (77.5 ± 9.7 kg and defenders (68.2 ± 6.5 kg were the heaviest compared to players in other playing positions. The goalkeepers also had the highest percentage of body fat (11.3 ± 2.3%, in contrast to midfielders who had the lowest body fat content (9.1 ± 0.9%. With regard to flexibility, defenders (45.1 ± 4.9 cm and midfielders (45.9 ± 5.4 cm performed better than goalkeepers (37.1 ± 4.3 cm and strikers (40.1 ± 3.4 cm. Midfielders (57.2 ± 3.1 ml1·kg−1·min1 and defenders (56.1 ± 5.1 ml1·kg−1·min1 had significantly higher values of maximal oxygen uptake (VO2max than goalkeepers (47.9 ± 0.2 ml−1·kg−1·min−1 and strikers (49.8 ± 6.2 ml−1·kg−1·min−1. No significant (p > 0.05 differences were observed for all other variables, with the exception of body height, body mass, and VO2max. It was therefore concluded that sports scientists and coaches should tailor conditioning programmes in soccer according to players’ positions in view of the implications for successful performance.

Physical Performance and Anthropometric Characteristics of Male South African University Soccer Players.

Science.gov (United States)

Kubayi, Alliance; Paul, Yvonne; Mahlangu, Prescott; Toriola, Abel

2017-12-01

Soccer is the most popular sport worldwide. Despite its global acclaim, scientific studies of soccer have tended to focus on tactics and techniques, thereby neglecting the physical and physiological profile of the players. Therefore, the purpose of this study was to examine physical and anthropometric characteristics of male South African university soccer players. Twenty-seven male soccer players aged 19 to 24 (mean age: 22.1 years; s = 1.5 years) volunteered to participate in the study. The results showed that goalkeepers (77.5 ± 9.7 kg) and defenders (68.2 ± 6.5 kg) were the heaviest compared to players in other playing positions. The goalkeepers also had the highest percentage of body fat (11.3 ± 2.3%), in contrast to midfielders who had the lowest body fat content (9.1 ± 0.9%). With regard to flexibility, defenders (45.1 ± 4.9 cm) and midfielders (45.9 ± 5.4 cm) performed better than goalkeepers (37.1 ± 4.3 cm) and strikers (40.1 ± 3.4 cm). Midfielders (57.2 ± 3.1 ml 1 ·kg -1 ·min 1 ) and defenders (56.1 ± 5.1 ml 1 ·kg -1 ·min 1 ) had significantly higher values of maximal oxygen uptake (VO 2max ) than goalkeepers (47.9 ± 0.2 ml -1 ·kg -1 ·min -1 ) and strikers (49.8 ± 6.2 ml -1 ·kg -1 ·min -1 ). No significant (p > 0.05) differences were observed for all other variables, with the exception of body height, body mass, and VO 2max . It was therefore concluded that sports scientists and coaches should tailor conditioning programmes in soccer according to players' positions in view of the implications for successful performance.

Investigation of methods for physical characteristics of atmospheric aerosols and ground dust fractions on radioactive contaminated areas

International Nuclear Information System (INIS)

Artem'ev, O.I.; Osintsev, A.Yu.; Gaziev, Ya.I.; Gordeev, S.K.

2005-01-01

The paper presents data about current situation and trends to develop investigation methods for physical characteristics of atmospheric aerosols and ground dust fractions that are observed on the former Semipalatinsk Test Site area and adjacent regions. It was considered one of the options for comprehensive collection of radioactive aerosols as fallout within control area of atmospheric contamination and underlying surface with aerosol products of the man-caused dusting on the former STS area to determine rates of 'dry' deposition and ground-based activity concentration contained in these products of radionuclides at different distances from place of dusting. (author)

NF-6 program complex for BESM-6 computation of the basic neutron-physical characteristics of nuclear reactors

International Nuclear Information System (INIS)

Zizin, M.N.; Savochkina, O.A.; Chukhlova, O.P.

1978-01-01

A structure of standard designations is described and semantics of a number of standard values used in a NF-6 program complex is given. Main source data and results of neutron-physical reactor calculation are standard values, the peculiarities of FORTRAN and ALGOL-GDR algorithm languages in the DUBNA monitoring system were taken account of. As a base of standard values list the FIHAR system list, supplemented with new standard designations for integral reactor characteristics, is used. Developed is also a list of standard values to organize the exchange with external memory in the process of task solution and long-range storage

Adolescent Physical Fighting in Ghana, Their Demographic and Social Characteristics

Directory of Open Access Journals (Sweden)

Emmanuel O. Acquah

2014-05-01

Full Text Available Physical fighting is an important behavioral concern of public health importance among adolescents worldwide. The present study examines the patterns and correlates of physical fighting among a school-based population in a low-income country setting. Data on 6235 adolescents aged 11–16 years were derived from the Republic of Ghana contributions to the Global School-based Health Survey. Three thresholds of participation in a physical fight during a 12-month recall period were compared against several independent sociodemographic variables. Bivariate analyses were used to screen for statistically significant associations and multinomial logistic regression was used to examine significant relationships while adjusting for covariates. Within the recall period, 32% of adolescents had reported being involved in two or more physical fights. Those involved in a physical fight during three or more days during the recall period were more likely to have been bullied (relative risk ratios (RRR = 1.86; 99% confidence intervals (CI: 1.38–2.52, have had a troubled experience with alcohol (RRR = 2.202; CI = 1.55–2.64, and miss days of school (RRR = 2.02; CI = 1.39–2.92. When adjusted only for age and sex, having understanding parents was protective (RRR = 0.64; CI = 0.53–0.78 as was having a positive school environment (RRR = 0.73; CI = 0.55–0.97. Our findings suggest that school-based programming which simultaneously targets multiple risk behaviors and conflict resolution may be helpful in interventions to reduce rates of physical fighting.

Reasons for participation and satisfaction in physical activity, physical exercises, and sports

OpenAIRE

Elmer Garita Azofeifa

2006-01-01

Motivation in physical activity constitutes a multidimensional psychological characteristic that is influenced by the person’s internal aspects (preferences, desires, fears, etc.) and his/her experiences in the external environment (social acceptance, friends, skills, etc.).  In a period in which physical activity is globally increasing among people of all ages, it is important for physical educators, sports trainers, or physical instructors to know the main reasons for their trainees to exer...

Characteristics of Selected Anthropometric Foot Indicators in Physically Active Students.

Science.gov (United States)

Bac, Aneta; Bogacz, Gabriela; Ogrodzka-Ciechanowicz, Katarzyna; Kulis, Aleksandra; Szaporów, Tomasz; Woźniacka, Renata; Radlińska, Natalia

2018-05-01

The aim of this study was to determine the type of medial longitudinal arch (MLA) in students of Krakow universities, investigate the relationship between physical activity and the shaping of the feet, and examine the relationship between hallux valgus angle and the type of footwear chosen most often. The study group consisted of 120 students, of which 56 respondents were students of the University School of Physical Education in Krakow, whereas the remaining 64 respondents were students of the Pedagogical University of Krakow. To evaluate the MLA, a podoscope was used, which allowed us to determine the length and width of the foot, and calculation of the Clarke angle, heel angle γ, and the angle of hallux valgus. All students were also subjected to a measurement of body weight and height. There was a statistically significant relationship between physical activity and the Clarke angle in the group of women studying at the University School of Physical Education. There was no correlation between the hallux valgus angle and the type of footwear chosen most often in the research groups. The most frequently diagnosed type of longitudinal and transverse arch foot in the research group was normal MLA. There was no relationship between physical activity and transverse arch foot in any of the research groups.

Chemical, physical, and sensory characteristics of analog rice developed from the mocaf, arrowroof, and red bean flour

Science.gov (United States)

Wahjuningsih, S. B.; Susanti, S.

2018-01-01

This research was aimed to analyze the chemical, physical, and sensory characteristics of the analog rice developed from a composite formula consisting of mocaf, arrowroot, and red bean flour. Experiment was designed into 5 different composition types i.e B1 (90%: 0%: 10%), B2 (80%:10%: 10%), B3 (70% : 20% : 10%), B4 (60%: 30%:10%), and B5 (50%: 40%: 10%) which in each type was repeated in 4 times. Carrageenan was used as a binder in the making process of those analog rice. Investigation procedure was carried out into several stages such as preparation and characterization of raw materials, production of analog rice in composite formula, then the testing of its chemical and sensory properties. Chemical characteristics were evaluated about the level of starch, amylose, dietary fiber, and resistant starch while sensory characteristics were examined about the texture, flavor, and aroma. The result showed that based on the sensory test, the best composite formula of rice analog was B2 (ratio flour of mocaf: Arrowroot: Red bean = 80:10:10). In addition, B2 formula possessed the chemical characteristics similar with the truth rice either in water content (12.18%), ash (2.63%), protein (6.17%), fat (1.31%), carbohydrate (89.88%), starch (73.29%), amylose (24.91%), total dietary fiber (7.04%), or resistant starch (6.71%). Furthermore, the higher of arrowroot flour proportion, the greater of amylose, dietary fiber and resistant starch containing in the rice analog. In the opposite, its starch content was getting down.

Seasonal variations in physical characteristics of aerosol particles at the King Sejong Station, Antarctic Peninsula

Science.gov (United States)

Kim, Jaeseok; Yoon, Young Jun; Gim, Yeontae; Kang, Hyo Jin; Choi, Jin Hee; Park, Ki-Tae; Lee, Bang Yong

2017-11-01

Seasonal variability in the physical characteristics of aerosol particles sampled from the King Sejong Station in the Antarctic Peninsula was investigated over the period between March 2009 and February 2015. Clear seasonal cycles for the total particle concentration (CN) were observed. The mean monthly concentration of particles larger than 2.5 nm (CN2.5) was highest during the austral summer, with an average value of 1080.39 ± 595.05 cm-3, and lowest during the austral winter, with a mean value of 197.26 ± 71.71 cm-3. The seasonal patterns in the concentrations of cloud condensation nuclei (CCN) and CN coincide, with both concentrations being at a minimum in winter and maximum in summer. The measured CCN spectra were approximated by fitting a power-law function relating the number of CCN for a given supersaturation (SS) to each SS value, with fitting coefficients C and kT. The values for C varied from 6.35 to 837.24 cm-3, with a mean of 171.48 ± 62.00 cm-3. The values for kT ranged from 0.07 to 2.19, with a mean of 0.41 ± 0.10. In particular, the kT values during the austral summer were higher than those during the winter, indicating that aerosol particles are more sensitive to SS changes during summer. Furthermore, the annual mean hygroscopicity parameter, κ, was estimated as 0.15 ± 0.05, for a SS of 0.4 %. The effects of the origin and pathway travelled by the air mass on the physical characteristics of the aerosol particles were also determined. The modal diameter of aerosol particles originating in the South Pacific Ocean showed a seasonal variation varying from 0.023 µm in winter to 0.034 µm in summer for the Aitken mode, and from 0.086 µm in winter to 0.109 µm in summer for the accumulation mode.

Development status and application prospect of supercritical-pressure light water cooled reactor

International Nuclear Information System (INIS)

Li Manchang; Wang Mingli

2006-01-01

The Supercritical-pressure Light Water Cooled Reactor (SCWR) is selected by the Generation IV International Forum (GIF) as one of the six Generation IV nuclear systems that will be developed in the future, and it is an innovative design based on the existing technologies used in LWR and supercritical coal-fired plants. Technically, SCWR may be based on the design, construction and operation experiences in existing PWR and supercritical coal-fired plants, which means that there is no insolvable technology difficulties. Since PWR technology will be adopted in the near term and medium term projects in China, and considering the sustainable development of the technology, it is an inevitable choice to research and develop the nuclear system of supercritical light water cooled reactor. (authors)

Children's recreational physical activity

NARCIS (Netherlands)

Kemperman, A.D.A.M.; Timmermans, H.J.P.

2011-01-01

This study explored children's participation in recreational (physical) activities and the extent to which this participation was influenced by individual and household socio-demographics and characteristics of the social and physical environment. Travel and activity diaries were used to collect

Physical characteristic of brown algae (Phaeophyta from madura strait as irreversible hydrocolloid impression material

Directory of Open Access Journals (Sweden)

Prihartini Widiyanti

2012-09-01

Full Text Available Background: Brown algae is a raw material for producing natrium alginates. One type of brown algae is Sargassum sp, a member of Phaeophyta division. Sargassum sp could be found in Madura strait Indonesia. Natrium alginate can be extracted from Sargassum sp. The demand of alginate in Indonesia is mainly fulfilled from abroad, meanwhile Sargassum sp is abundantly available. Purpose: The purpose of study were to explore the potency of brown alga Sargassum sp from Madura strait as hydrocolloid impression material and to examine its physical characteristic. Methods: The methods of research including extraction natrium alginate from Sargassum sp, synthesis of dental impression material and the test of porosity, density, viscosity, and water content of impression material which fulfilled the standard of material used in clinical application in dentistry. Results: Extraction result of Sargassum sp was natrium alginate powder with cream colour, odorless, and water soluble. The water content of natrium alginate was 21.64% and the viscosity was 0.7 cPs. The best porosity result in the sample with the addition of trinatrium phosphate 4% was 3.61%. Density value of impression material was 3 gr/cm3. Conclusion: The research suggested that brown algae Sargassum sp from Madura strait is potential as hydrocolloid impression material, due to its physical properties which close to dental impression material, but still need further research to optimize the physical characteristic.Latar belakang: Alga coklat adalah sumber bahan baku material natrium alginat. Salah satu jenis alga coklat adalah Sargassum sp yang merupakan anggota divisi Phaeophyta. Sargassum sp dapat ditemukan di Selat Madura Indonesia. Natrium alginat dapat diekstraksi dari Sargassum sp. Kebutuhan akan bahan ini di Indonesia sebagian besar dipenuhi dari impor, padahal ketersediaan Sargassum sp di Indonesia sangat melimpah. Tujuan: Penelitian ini bertujuan untuk mengeksplorasi potensi alga coklat

Contemporary physical activities

OpenAIRE

Tainio, Matti

2018-01-01

The customary view of today’s recreational physical activities turns the human movement into a rational practice that is pursued for practical reasons only: for health, vitality, stamina and longevity. This prevalent point of view affects the understanding of the ends, content and quality of physical activities and it creates a bias where the biological, physiological and medical characteristics of physical activities are emphasized while the sensuous, experiential and creative aspects are su...

Medically unexplained physical symptoms and work functioning over 2 years : their association and the influence of depressive and anxiety disorders and job characteristics

NARCIS (Netherlands)

den Boeft, Madelon; Twisk, Jos W R; Hoekstra, T.; Terluin, Berend; Penninx, Brenda W J H; van der Wouden, Johannes C; Numans, Mattijs E.; van der Horst, Henriette E

2016-01-01

BACKGROUND: Medically unexplained physical symptoms (MUPS) are highly prevalent and may affect work functioning. In this study we aimed to assess the longitudinal association between MUPS and work functioning over 2 years and the influence of job characteristics and depressive and anxiety disorders

Development and physical characteristics of a novel compound radiophotoluminescent glass dosimeter

Energy Technology Data Exchange (ETDEWEB)

Hsu, S.-M. [Department of Biomedical Imaging and Radiological Sciences, National Yang-Ming University, 155, Li-Nong Street Sec. 2, Pei-tou, Taipei 112, Taiwan (China)], E-mail: d49220003@ym.edu.tw; Yang, H.-W. [Department of Material Science and Engineering, National United University, No. 1, Lien Da, Miao-Li 360, Taiwan (China); Huang, David Y.C. [Facutly of Memorial Sloan-Kettering Cancer Center at Mercy Medical Center, 1000 N, Village Avenue, Rockville Centre, NY (United States); Hsu, W.-L.; Lu, C.-C. [Department of Material Science and Engineering, National United University, No. 1, Lien Da, Miao-Li 360, Taiwan (China); Chen, W.-L. [Department of Biomedical Imaging and Radiological Sciences, National Yang-Ming University, 155, Li-Nong Street Sec. 2, Pei-tou, Taipei 112, Taiwan (China)

2008-02-15

The thermoluminescent dosimeters (TLDs) are widely used for measuring the radiation dose. However, the luminescence centers of TLD disappeared by reading process, and then repetition of measurement is impossible. Radiophotoluminescent glass dosimeters (RPLGDs) can be repeatedly read and keep the luminescence centers for a long time. When machine errors occurred, RPLGD data can be re-analyzed to ensure the reliability of measurement results. Our previous study revealed that the RPLGD is one of the most important radiation dose measurement instruments as compared with TLD. Nevertheless, this RPLGD cannot measure the neutron dose. The aims of this study are to develop the novel compound of RPLGD to detect neutrons, and investigate their physical characteristics. In this study, some series self-fabricated glass dosimeters were prepared from reagent powders of AgCl, AgNO{sub 3}, AgPO{sub 3}, Al(OH){sub 3}, NaPO{sub 3}, Na{sub 2}CO{sub 3}, Na{sub 3}PO{sub 4} and P{sub 2}O{sub 5}. Based on this study, we found that the absorption spectra of irradiated glass wavelength maxima typically occurred in the 300-350 nm. Moreover, 0.1 mol% of sliver consist in our newly developed RPLGD showed the highest gamma ray detection sensitivity. The development of a novel compound RPLGD progress will be continuously improved in our laboratory.

Improvement of viability of probiotic bacteria, organoleptic qualities and physical characteristics in kefir using transglutaminase and xanthan.

Science.gov (United States)

Sabooni, Pooria; Pourahmad, Rezvan; Adeli, Hamid Reza Mahdavi

2018-01-01

Using kefir as a probiotic food carrier has many benefits. At the same time, it is considered an appropriate product for the dairy industry. The aim of this study was to evaluate the effect of xanthan gum and transglutaminase enzyme on the viability of probiotics and the organoleptic qualities and physicochemical characteristics of kefir. Three levels of transglutaminase enzyme (50, 100 and 150 ppm), and xanthan gum (0.05%, 0.1% and 0.2%) were used. Sensory and physicochemical properties and viability of probiotic bac- teria were measured over 2 weeks of storage at 4°C. By increasing the amounts of xanthan gum and transglutaminase, the viscosity of the samples was increased and syneresis was reduced significantly (P < 0.05). The kefir sample containing 150 ppm enzyme and 0.2% gum had the highest number of probiotic bacteria. Moreover, the highest organoleptic scores were found for this sample. It can be concluded that adding 150 ppm transglutaminase and 0.2% xanthan improved the vi- ability of probiotics and the physical and organoleptic characteristics of kefir.

Physical characteristics of satellite surfaces

International Nuclear Information System (INIS)

Veverka, J.; Thomas, P.; Johnson, T.V.; Matson, D.; Housen, K.

1986-01-01

Both exogenic and endogenic effects have been proposed to explain the major observed characteristics of satellite surfaces. The current view is that the basic properties of most surfaces result from the intrinsic composition of a body and its geologic history. Exogenic effects have, however, played a role in modifying the appearance of nearly all surfaces. The most important exogenic effect is impact cratering, one manifestation of which is the production of micrometeoroid gardened regoliths on airless bodies. On large, silicate bodies the micrometeoroid bombardment can produce an optically mature, dark agglutinate-rich soil; the nature of regoliths on predominantly icy satellites remains uncertain. Direct accumulation of infalling material does not appear to play a major role in modifying most surfaces. Solar wind radiation effects have not altered greatly the optical properties of solar system objects; magnetospheric charged particles may have modified the optical properties of some outer planet satellites (e.g., sulfur ion bombardment in the case of some of the satellites of Jupiter). Other effects, such as aeolian and liquid/solid chemical weathering, may be important on satellites with atmospheres like Titan and Triton

Gamification in Physical Therapy : More Than Using Games

NARCIS (Netherlands)

Janssen, Joep; Verschuren, Olaf; Renger, Willem Jan; Ermers, Jose; Ketelaar, Marjolijn; van Ee, Raymond

The implementation of computer games in physical therapy is motivated by characteristics such as attractiveness, motivation, and engagement, but these do not guarantee the intended therapeutic effect of the interventions. Yet, these characteristics are important variables in physical therapy

Gamification in physical therapy: More than using games

NARCIS (Netherlands)

Janssen, J; Verschuren, O.; Renger, W.J.; Ermers, J.; Ketelaar, M.; Ee, R. van

2017-01-01

The implementation of computer games in physical therapy is motivated by characteristics such as attractiveness, motivation, and engagement, but these do not guarantee the intended therapeutic effect of the interventions. Yet, these characteristics are important variables in physical therapy

Physical characteristics and quality of water from selected springs and wells in the Lincoln Point-Bird Island area, Utah Lake, Utah

Science.gov (United States)

Baskin, R.L.; Spangler, L.E.; Holmes, W.F.

1994-01-01

From February 1991 to October 1992, the U.S. Geological Survey, in cooperation with the Central Utah Water Conservancy District, investigated the hydrology of the Lincoln Point - Bird Island area in the southeast part of Utah Lake, Utah. The investigation included measurements of the discharge of selected springs and measurements of the physical and chemical characteristics of water from selected springs and wells in the LincolnPoint - Bird Island area. This report contains data for twenty-one distinct springs in the study area including two springs beneath the surface of Utah Lake at Bird Island. Data from this study, combined with data from previous studies, indicate that the location of springs in the Lincoln Point - Bird Island area probably is controlled by fractures that are the result of faulting. Measured discharge of springs in the Lincoln Point - Bird Island area ranged from less than 0.01 cubic foot per second to 0.84 cubic foot per second. Total discharge in the study area, including known unmeasured springs and seeps, is estimated to be about 5 cubic feet per second. Reported and measured temperatures of water from springs and wells in the Lincoln Point - Bird Island area ranged from 16.0 degrees Celsius to 36.5 degrees Celsius. Dissolved-solids con-centrations ranged from 444 milligrams per liter to 7,932 milligrams per liter, and pH ranged from 6.3 to 8.1. Physical and chemical characteristics of spring and well water from the west side of Lincoln Point were virtually identical to the physical and chemical characteristics of water from the submerged Bird Island springs, indicating a similar source for the water. Water chemistry, isotope analyses, and geothermometer calculations indicate deep circulation of water discharging from the springs and indicate that the source of recharge for the springs at Lincoln Point and Bird Island does not appear to be localized in the LincolnPoint - Bird Island area.

Uncertainties in HTGR neutron-physical characteristics due to computational errors and technological tolerances

International Nuclear Information System (INIS)

Glushkov, E.S.; Grebennik, V.N.; Davidenko, V.G.; Kosovskij, V.G.; Smirnov, O.N.; Tsibul'skij, V.F.

1991-01-01

The paper is dedicated to the consideration of uncertainties is neutron-physical characteristics (NPC) of high-temperature gas-cooled reactors (HTGR) with a core as spherical fuel element bed, which are caused by calculations from HTGR parameters mean values affecting NPC. Among NPC are: effective multiplication factor, burnup depth, reactivity effect, control element worth, distribution of neutrons and heat release over a reactor core, etc. The short description of calculated methods and codes used for HTGR calculations in the USSR is given and evaluations of NPC uncertainties of the methodical character are presented. Besides, the analysis of the effect technological deviations in parameters of reactor main elements such as uranium amount in the spherical fuel element, number of neutron-absorbing impurities in the reactor core and reflector, etc, upon the NPC is carried out. Results of some experimental studies of NPC of critical assemblies with graphite moderator are given as applied to HTGR. The comparison of calculations results and experiments on critical assemblies has made it possible to evaluate uncertainties of calculated description of HTGR NPC. (author). 8 refs, 8 figs, 6 tabs

Simulation of Thermal Hydraulic at Supercritical Pressures with APROS

Energy Technology Data Exchange (ETDEWEB)

Kurki, Joona [VTT Technical Research Centre of Finland, P.O. Box 1000, FI02044 VTT (Finland)

2008-07-01

The proposed concepts for the fourth generation of nuclear reactors include a reactor operating with water at thermodynamically supercritical state, the Supercritical Water Reactor (SCWR). For the design and safety demonstrations of such a reactor, the possibility to accurately simulate the thermal hydraulics of the supercritical coolant is an absolute prerequisite. For this purpose, the one-dimensional two-phase thermal hydraulics solution of APROS process simulation software was developed to function at the supercritical pressure region. Software modifications included the redefinition of some parameters that have physical significance only at the subcritical pressures, improvement of the steam tables, and addition of heat transfer and friction correlations suitable for the supercritical pressure region. (author)

Evaluasi Karakteristik Fisik, Komposisi Kimia dan Kualitas Mikrobia Karkas Broiler Beku yang Beredar di Pasar Tradisional Kabupaten Halmahera Utara, Maluku Utara (Evaluation of Physical Characteristics, Chemical Composition and Microbial Quality of Frozen

Directory of Open Access Journals (Sweden)

Dellen Naomi Matulessy

2012-02-01

on the number of coliform (P<0.05. The conclusions of the experiment were that broiler carcasses sold in the traditional market in North Halmahera in respect of their physical characteristics and their chemical composition have not altered, whereas the microbial quality such as total plate count and E.coli number was still below threshold. Furthermore, coliform population was also below the maximum number allowed. (Key words: Traditional market, Broilers frozen, Physical characteristics, Chemical composition, Microbial quality

TRIGA reactor characteristics

International Nuclear Information System (INIS)

Boeck, H.; Villa, M.

2007-01-01

This module describes the general design, characteristics and parameters of TRIGA reactors and fuels. It is recommended that most of this information should be incorporated into any reactor operator training program and, in many cases, the facility Safety Analysis Report. It is oriented to teach the basics of the physics and mechanical design of the TRIGA fuel as well as its unique operational characteristics and the differences between TRIGA fuels and others more traditional reactor fuels. (nevyjel)

Impact of physical properties of mixture of diesel and biodiesel fuels on hydrodynamic characteristics of fuel injection system

Directory of Open Access Journals (Sweden)

Filipović Ivan M.

2014-01-01

Full Text Available One of the alternative fuels, originating from renewable sources, is biodiesel fuel, which is introduced in diesel engines without major construction modifications on the engine. Biodiesel fuel, by its physical and chemical properties, is different from diesel fuel. Therefore, it is expected that by the application of a biodiesel fuel, the characteristic parameters of the injection system will change. These parameters have a direct impact on the process of fuel dispersion into the engine cylinder, and mixing with the air, which results in an impact on the quality of the combustion process. Method of preparation of the air-fuel mixture and the quality of the combustion process directly affect the efficiency of the engine and the level of pollutant emissions in the exhaust gas, which today is the most important criterion for assessing the quality of the engine. The paper presents a detailed analysis of the influence of physical properties of a mixture of diesel and biodiesel fuels on the output characteristics of the fuel injection system. The following parameters are shown: injection pressure, injection rate, the beginning and duration of injection, transformation of potential into kinetic energy of fuel and increase of energy losses in fuel injection system of various mixtures of diesel and biodiesel fuels. For the analysis of the results a self-developed computer program was used to simulate the injection process in the system. Computational results are verified using the experiment, for a few mixtures of diesel and biodiesel fuels. This paper presents the verification results for diesel fuel and biodiesel fuel in particular.

Computation of integral electron storage ring beam characteristics in the application package DeCA. Version 3.3. A physical model

International Nuclear Information System (INIS)

Gladkikh, P.I.; Strelkov, M.A.; Zelinskij, A.Yu.

1993-01-01

In calculations and optimization of electron storage ring lattices, aside from solving the problem of particle motion stability in the ring and calculating ring structure functions and betatron tune, it is of great importance to determine the integral characteristics such as momentum compaction factor, chromaticity of the lattice, emittance, energy spread, bunch size, beam lifetime, etc. Knowing them, one is able to determine all most important properties which the beam would have in the storage ring, as well as to work out requirements for physical equipment of the ring. In this respect it is of importance to have a possibility of calculating rapidly all the parameters required. This paper describes convenient algorithms for calculating integral beam characteristics in electron storage rings, which are employed in the application package DeCA

COMPARATIVE STUDIES OF PHYSICAL CHARACTERISTICS OF RAW AND MODIFIED SAWDUST FOR THEIR USE AS ADSORBENTS FOR REMOVAL OF ACID DYE

Directory of Open Access Journals (Sweden)

Jivan Singh

2011-05-01

Full Text Available The present paper aims to investigate the physical characteristics of sawdust relative to its use as an adsorbent for removal of an acid dye (Orange G from aqueous solutions. The raw sawdust was sieved to have a uniform size and was activated by sulphuric acid by refluxing the content at 60 oC for 4 h. Surface morphology and surface functional groups of both raw and modified sawdust samples were investigated by Scanning Electron Microscope (SEM, Energy Dispersive X-ray Analysis (EDX, Fourier Transformation Infrared (FTIR, and elemental analysis. All these analyses displayed significant change in the structure of the sawdust. The data obtained from batch adsorption experiments for the removal of the selected dye confirmed that adsorption characteristics of the modified sawdust were better than those of raw sawdust.

Racial Disparities in Obesity Prevalence in Mississippi: Role of Socio-Demographic Characteristics and Physical Activity

Directory of Open Access Journals (Sweden)

Mina Qobadi

2017-03-01

Full Text Available Although the etiology of obesity is complex, social disparities are gaining attention for their contribution to obesity. The aim of this study was to estimate prevalence of obesity and to explore the associations between socio-demographic characteristics and obesity by race in Mississippi. Data from the 2014 Mississippi Behavior Risk Factors Surveillance System (BRFSS were used in this study (n = 3794. Descriptive statistics, Chi-square tests and logistic regressions were conducted using SAS Proc. Survey procedures to account for BRFSS’s multistage complex survey design and sample weights. The overall prevalence of self-reported obesity was 37%. Multiple logistic regression model showed gender was the only variable associated with increased risk of obesity among blacks. Black females were more likely to be obese (Adjusted OR [aOR] = 2.0, 95% CI: 1.4–2.7, ref = male after controlling for confounders. Among white adults, obesity was significantly associated with physical activity, gender, age and education levels. Those aged 25–44 years (aOR = 1.7, 95% CI: 1.1–2.6, ref ≥ 64 years, those were physically inactivity (aOR = 1.8, 95% CI: 1.4–2.5, ref = physically active or had high school education (OR = 1.6, 95% CI: 1.2–2.3, ref = college graduate or some college (aOR = 1.5, 95% CI: 1.2–2.3, ref = college graduate were more likely to be obese; females (aOR = 0.8; 95% CI: 0.6–0.9, ref = male and those aged 18–24 years (aOR = 0.50, 95% CI: 0.21–0.9, ref ≥ 64 years were less likely to be obese.

Prediction of perceptual audio reproduction characteristics

DEFF Research Database (Denmark)

Volk, Christer Peter

Perception of the reproduction characteristics of headphones and loudspeakers are presently not directly related to the many technical measurements made in the physical domain. This have made it difficult to interpret traditional measurements of headphones and loudspeakers in terms of how physics...

Examination of nuclear systems of fourth generation

International Nuclear Information System (INIS)

2015-01-01

This report proposes a detailed discussion of the six nuclear systems selected by the Generation IV International Forum with the objective of coordinating research and development activities which should result in the deployment of nuclear systems (reactors and associated fuel cycle installations) of fourth generation by the second half of the 21. century. These systems are: sodium cooled fast reactors (SFR), very high temperature reactors (VHTR), gas cooled fast reactors (GFR), lead cooled fast reactors (LFR) or lead bismuth eutectic reactors (LBE), molten salt reactors (MSR), and supercritical water reactors (SCWR). Fast systems are interesting as they favour the transmutation of fertile materials into fissile materials. History and perspectives of development, main characteristics, management of safety functions, risk analysis, impact on the environment, radiation protection and decommissioning, concept maturity and R and D needs are discussed for each of these systems. A comparison is reported in terms of main characteristics of reactors, of neutron characteristics and reactivity control, of sensitivity to cooling losses, of confinement function, of exploitation safety, of in-service inspection, of behaviour in case of severe accident, of toxicity of chemical substances, of sensitivity to aggressions (seism), of concept maturity and technological difficulties. The report also proposes a review of the various fuels which can be used in these different systems and which have been considered as eligible by the International Forum: oxides, carbides, nitrides, metals, waste processing. The last part addresses the transmutation of long life radioactive elements: physics, context, assessment of scenarios soundness, influence of transmutation on installations and transports

Physical Characteristics of the Dalat Nuclear Research Reactor; Cac dac trung vat ly lo cua lo phan ung hat nhan Da Lat

Energy Technology Data Exchange (ETDEWEB)

Huy, Ngo Quang [ed.; Nuclear Research Inst., Da Lat (Viet Nam)

1994-10-01

The operation of the TRIGA MARK II reactor of nominal power 250 KW has been stopped as all the fuel elements have been dismounted and taken away in 1968. The reconstruction of the reactor was accomplished with Russian technological assistance after 1975. The nominal power of the reconstructed reactor is of 500 KW. The recent Dalat reactor is unique of its kind in the world: Russian-designed core combined with left-over infrastructure of the American-made TRIGA II. The reactor was loaded in November 1983. It has reached physical criticality on 1/11/1983 (without central neutron trap) and on 18/12/1983 (with central neutron trap). The power start up occurred in February 1984 and from 20/3/1984 the reactor began to be operated at the nominal power 500 KW. The selected reports included in the proceedings reflect the start up procedures and numerous results obtained in the Dalat Nuclear Research Institute and the Centre of Nuclear Techniques on the determination of different physical characteristics of the reactor. These characteristics are of the first importance for the safe operation of the Dalat reactor.

Influence of chemical and physical characteristics of cement kiln dusts (CKDs) on their hydration behavior and potential suitability for soil stabilization

International Nuclear Information System (INIS)

Peethamparan, Sulapha; Olek, Jan; Lovell, Janet

2008-01-01

The interaction of CKDs with a given soil depends on the chemical and physical characteristics of the CKDs. Hence, the characterization of CKDs and their hydration products may lead to better understanding of their suitability as soil stabilizers. In the present article, four different CKD powders are characterized and their hydration products are evaluated. A detailed chemical (X-ray diffraction), thermogravimetric and morphological (scanning electron microscope) analyses of both the CKD powders and the hydrated CKD pastes are presented. In general, high free-lime content (∼ 14-29%) CKDs, when reacted with water produced significant amounts of calcium hydroxide, ettringite and syngenite. These CKDs also developed higher unconfined compressive strength and higher temperature of hydration compared to CKDs with lower amounts of free-lime. An attempt was made to qualitatively correlate the performance of CKD pastes with the chemical and physical characteristics of the original CKD powders and to determine their potential suitability as soil stabilizers. To that effect a limited unconfined compressive strength testing of CKD-treated kaolinite clays was performed. The results of this study suggest that both the compressive strength and the temperature of hydration of the CKD paste can give early indications of the suitability of particular CKD for soil stabilization

Thermal performance and efficiency of supercritical nuclear reactors

International Nuclear Information System (INIS)

Romney Duffey; Tracy Zhou; Hussam Khartabil

2009-01-01

The paper reviews the major advances and innovative aspects of the thermal performance of recent concepts for super-critical water-cooled nuclear reactors (SCWR). The concepts are based on the extensive experience in the thermal power industry with super and ultra-supercritical boilers and turbines. The challenges and goals of increased efficiency, reduced cost, enhanced safety and co-generation have been pursued over the last ten years, and have resulted both in viable concepts and a vibrant defined R and D effort. The supercritical concept has wide acceptance among industry, as it reflects standard engineering practices and current thermal plant technology that is being already deployed. The SCWR concept represents a continuous development of water-cooled reactor technology, which utilizes the best and latest advances made in the thermal power industry. (author)

Risk analysis for a radiolysis gas detonation in an in-pile loop with supercritical water

International Nuclear Information System (INIS)

Zeiger, T.; Raque, M.; Kuznetsov, M.; Redlinger, R.; Schulenberg, T.

2012-01-01

The SCWR (supercritical water reactor) -FQT project is a cooperation between European and Chinese partners aimed to test the fuel SCWR elements under reactor conditions. In the frame of this work the risk of radiolysis gas production in the active range of the test track was assessed. The radiolysis gas could accumulate in an emergency cooling system with stagnating coolant. The ignition of this radiolysis gas could cause pressure peaks that are able to damage the primary coolant circuit. Pressure increase and deformations in case of ignition of accumulated gas were investigated. As piping material the Ti stabilized austenitic steel 08Ch18N10T was assumed, the simulation was performed using the ANSYS code. The results show that pipes without significant wall thickness enhancement cannot withstand the radiolysis gas detonation.

Code Development in Coupled PARCS/RELAP5 for Supercritical Water Reactor

Directory of Open Access Journals (Sweden)

Po Hu

2014-01-01

Full Text Available The new capability is added to the existing coupled code package PARCS/RELAP5, in order to analyze SCWR design under supercritical pressure with the separated water coolant and moderator channels. This expansion is carried out on both codes. In PARCS, modification is focused on extending the water property tables to supercritical pressure, modifying the variable mapping input file and related code module for processing thermal-hydraulic information from separated coolant/moderator channels, and modifying neutronics feedback module to deal with the separated coolant/moderator channels. In RELAP5, modification is focused on incorporating more accurate water properties near SCWR operation/transient pressure and temperature in the code. Confirming tests of the modifications is presented and the major analyzing results from the extended codes package are summarized.

Physical and biological characteristics of the winter-summer transition in the Central Red Sea

KAUST Repository

Zarokanellos, Nikolaos

2017-07-25

The Central Red Sea (CRS) lies between two distinct hydrographic and atmospheric regimes. In the southern Red Sea, seasonal monsoon reversal regulates the exchange of water between the Red Sea and the Indian Ocean. In the northern Red Sea, intermediate and occasionally deep water are formed during winter to sustain the basin\\'s overturning circulation. Highly variable mesoscale eddies and the northward flowing eastern boundary current (EBC) determine the physical and biogeochemical characteristics of the CRS. Ship-based and glider observations in the CRS between March and June 2013 capture key features of the transition from winter to summer and depict the impact of the eddy activity on the EBC flow. Less saline and relatively warmer water of Indian Ocean origin reaches the CRS via the EBC. Initially, an anticyclonic eddy with diameter of 140 km penetrating to 150m depth with maximum velocities up to 30–35 cm s prevails in the CRS. This anticyclonic eddy appears to block or at least redirect the northward flow of the EBC. Dissipation of the eddy permits the near-coastal, northward flow of the EBC and gives place to a smaller cyclonic eddy with a diameter of about 50 km penetrating to 200 m depth. By the end of May, as the northerly winds become stronger and persistent throughout the basin, characteristic of the summer southwest monsoon wind regime, the EBC, and its associated lower salinity water became less evident, replaced by the saltier surface water that characterizes the onset of the summer stratification in the CRS.

Physical Characteristics of Laboratory Tested Concrete as a Substituion of Gravel on Normal Concrete

Science.gov (United States)

Butar-butar, Ronald; Suhairiani; Wijaya, Kinanti; Sebayang, Nono

2018-03-01

Concrete technology is highly potential in the field of construction for structural and non-structural construction. The amount uses of this concrete material raise the problem of solid waste in the form of concrete remaining test results in the laboratory. This waste is usually just discarded and not economically valuable. In solving the problem, this experiment was made new materials by using recycle material in the form of recycled aggregate which aims to find out the strength characteristics of the used concrete as a gravel substitution material on the normal concrete and obtain the value of the substitution composition of gravel and used concrete that can achieve the strength of concrete according to the standard. Testing of concrete characteristic is one of the requirements before starting the concrete mixture. This test using SNI method (Indonesian National Standard) with variation of comparison (used concrete : gravel) were 15: 85%, 25: 75%, 35:65%, 50:50 %, 75: 25%. The results of physical tests obtained the mud content value of the mixture gravel and used concrete is 0.03 larger than the standard of SNI 03-4142-1996 that is equal to 1.03%. so the need watering or soaking before use. The water content test results show an increase in the water content value if the composition of the used concrete increases. While the specific gravity value for variation 15: 85% until 35: 65% fulfilled the requirements of SNI 03-1969-1990. the other variasion show the specifics gravity value included on the type of light materials.

Determination and analysis of the physical chemical characteristics of witness coupons of boral for the CNLV

International Nuclear Information System (INIS)

Gonzalez M, J.L.; Aguilar H, F.; Rivero G, T.; Carrillo M, R.

2004-01-01

The burnt fuel elements that are extracted in each charging of the Units 1 and 2 of the Nuclear Power Plant of Laguna Verde, are deposited in shelves placed in the storage reservoir designed for this end. Each cell or storage shelf has a structure type cage. Among the cells neutron absorber material is placed, (Boral), what allows to avoid the possible criticality that could settle down when accumulating in the storage the irradiated fuel elements. This boral has been designed to maintain its characteristics of thermal neutron absorber during a lifetime of the plant. To check that the wings and the Boral have not suffered some degradation or some change due to the environmental conditions in the warehouse, it is necessary to watch over their physical and chemical characteristics periodically, what is carried out by a surveillance program based on Badges or manufactured witness coupons of the same material that the wings. The badges witness are embedded in a special wing, which is placed in the place with more radiation in the pool. In this work the laboratory tests carried out in the ININ to the coupon witness 03 of the Unit 2, (II-03) are described, being presented the results and obtained conclusions. (Author)

Anthropometric and physical performance characteristics of top-elite, elite and non-elite youth female team handball players.

Science.gov (United States)

Moss, Samantha Louise; McWhannell, Nicola; Michalsik, Lars Bojsen; Twist, Craig

2015-01-01

In order to maximise the potential for success, developing nations need to produce superior systems to identify and develop talent, which requires comprehensive and up-to-date values on elite players. This study examined the anthropometric and physical characteristics of youth female team handball players (16.07 ± 1.30 years) in non-elite (n = 47), elite (n = 37) and top-elite players (n = 29). Anthropometric profiling included sum of eight skinfolds, body mass, stature, girths, breadths and somatotype. Performance tests included 20 m sprint, counter-movement jump, throwing velocity, repeated shuttle sprint and jump ability test, and Yo-Yo Intermittent Recovery Test Level 1. Youth top-elite players had greater body mass, lean mass, stature, limb girths and breadths than elite and non-elite players, while only stature and flexed arm were higher in elite compared to non-elite players (all P  0.05). Top-elite performed better in most performance tests compared to both elite and non-elite players (P  0.05). Elite outperformed non-elite players only in throwing velocity. The findings reveal that non-elite players compare unfavourably to top-elite international European players in many anthropometric and performance characteristics, and differ in a few characteristics compared to elite European club team players. This study is useful for emerging team handball nations in improving talent identification processes.

Physical characteristics of the paper filter and low cafestol content filter coffee brews.

Science.gov (United States)

Rendón, Mery Yovana; Dos Santos Scholz, Maria Brígida; Bragagnolo, Neura

2018-06-01

The results found in the literature concerning the effect of consuming filter coffee brews on increasing the blood cholesterol levels due to the presence of diterpenes, are divergent. Thus the present research evaluated the diterpene (cafestol and kahweol) concentrations in filter coffee brews prepared with paper filters of different sizes, colors and origins (Brazil, Japan, The United States of America, Germany, France and the Netherlands), with and without micro perforations. This is the first study that reports the physical characteristics of paper filter and its importance to obtain filter coffee brew with low cafestol content. Thus, a sample of Catuai cultivar coffee with high cafestol content was roasted to a medium-light degree and used to prepare the brews in a 1:10 ratio (coffee powder to water). The diterpenes were extracted by direct saponification and quantified and identified by HPLC-DAD-MS/MS. The paper filters were physically characterized by measuring their grammage, and the fat permeation rate calculated in order to better understand the differences between the filters which allow one to obtain higher or lower diterpene contents. The cafestol and kahweol concentrations in the brews varied from 1.62 to 2.98 mg/L and from 0.73 to 1.96 mg/L, respectively. The highest cafestol and kahweol concentrations were obtained using paper filters with micro perforations, considering similar sized paper filters. The paper filters showed high fat permeability and grammages between 50.46 and 67.48 g/m 2 . The diterpene retention capacities of the filters produced in the different countries were similar. The results showed that the porosity of the paper filter and the particle size of the ground roasted coffee were determinant factors in obtaining filter coffee brews with lower cafestol contents. Copyright © 2018 Elsevier Ltd. All rights reserved.

Physical and chemical characteristics of Vietnamese natural corals used as substitutes for bone grafts

International Nuclear Information System (INIS)

Tran Cong Toai; To Phuong Vu; Tran Bac Hai; Doan Binh

1999-01-01

Coral has been used as substitutes for bone grafts in France and the United State of American. In Vietnam, research on coral has been done at the Biomaterial Research Laboratory, The University Training Centre since 1994. Among the studies are the determination of physical and chemical characteristics of natural coral blocks obtained by the scientists of the NhaTrang Maritime Institute. We found that it was quite necessary to establish a standard formula for processing coral as biomaterial graft. The selected coral was cut into blocks approximately 1x1x1 cm or 1x1x2 cm and cleaned. We measured the density, porous rate, water loading speed (at room temperature and at boiled temperature with low pressure, mechanical strength and content of soluble protein, chitosan in coral rods. (1140 samples of three types of corals). The density of Porites australiensis was heavier than that of Porites lutea. But, Porites lutea has more porous rate than Porites australiensis. This experiment has also showed that mechanical strength of Porites australiensis was harder than that of Porites lutea. To measure the water loading speed, the coral rods were treated at boiled temperature with low pressure versus at room temperature. We found that the water loading speed of Porites australiensis at boiled temperature was faster than that at room temperature. Porites lutea and Montastrea annuligera showed as the same result. The efficiency of water loading rate is quite low approximately 116 - 121 % for 45 minutes at room temperature versus 135 - 155 % for only I 0 minutes at boiled temperature with low pressure. We measured the content of soluble protein by both Lowry and Biuret methods, the content of soluble protein after washing with 0.9% sodium chloride, 1210 degree C, 60 minutes is very low (below limit of tests). The content of chitosan from dried coral rods treated with HCI 36 - 38 % and NAOH 0.01N is about 0.1 - 0.6 %. Our study determined some physical and chemical characteristics

CANONICAL CORRELATION OF PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE WOOD OF Eucalyptus grandis AND Eucalyptus saligna CLONES

Directory of Open Access Journals (Sweden)

Paulo Fernando Trugilho

2003-01-01

Full Text Available The analysis of canonical correlation measures the existence and the intensity of the association between two groups of variables. The research objectified to evaluate thecanonical correlation between chemical and physical characteristics and fiber dimensional ofwood of Eucalyptus grandis and Eucalyptus saligna clones, verifying the interdependenceamong the groups of studied variables. The analysis indicated that the canonical correlationswere high and that in two cases the first and second pair were significant at the level of 1% ofprobability. The analysis of canonical correlation showed that the groups are notindependent. The intergroup associations indicated that the wood of high insoluble lignin contentand low ash content is associated with the high radial and tangential contraction and highbasic density wood.

Examination of perceived neighborhood characteristics and transportation on changes in physical activity and sedentary behavior: The Trial of Activity in Adolescent Girls.

Science.gov (United States)

Evenson, Kelly R; Murray, David M; Birnbaum, Amanda S; Cohen, Deborah A

2010-09-01

We examined the association between perceived neighborhood characteristics and transport and 2-year changes in accelerometer-determined nonschool MET-weighted moderate-to-vigorous physical activity (MW-MVPA) and sedentary behavior of adolescent girls. Reporting that children do not play outdoors in their neighborhood, that their neighborhood was well lit, and that there were trails in their neighborhood were each associated with significant decreases in nonschool MW-MVPA. None of the neighborhood or transportation measures was associated with changes in nonschool sedentary behavior. Further work is needed to understand the determinants of the decline in physical activity and the increase in sedentary behavior among adolescent girls. Copyright 2010 Elsevier Ltd. All rights reserved.

Quantifying the Interactions Between Soil Thermal Characteristics, Soil Physical Properties, Hydro-geomorphological Conditions and Vegetation Distribution in an Arctic Watershed

Science.gov (United States)

Dafflon, B.; Leger, E.; Robert, Y.; Ulrich, C.; Peterson, J. E.; Soom, F.; Biraud, S.; Tran, A. P.; Hubbard, S. S.

2017-12-01

Improving understanding of Arctic ecosystem functioning and parameterization of process-rich hydro-biogeochemical models require advances in quantifying ecosystem properties, from the bedrock to the top of the canopy. In Arctic regions having significant subsurface heterogeneity, understanding the link between soil physical properties (incl. fraction of soil constituents, bedrock depth, permafrost characteristics), thermal behavior, hydrological conditions and landscape properties is particularly challenging yet is critical for predicting the storage and flux of carbon in a changing climate. This study takes place in Seward Peninsula Watersheds near Nome AK and Council AK, which are characterized by an elevation gradient, shallow bedrock, and discontinuous permafrost. To characterize permafrost distribution where the top of permafrost cannot be easily identified with a tile probe (due to rocky soil and/or large thaw layer thickness), we developed a novel technique using vertically resolved thermistor probes to directly sense the temperature regime at multiple depths and locations. These measurements complement electrical imaging, seismic refraction and point-scale data for identification of the various thermal behavior and soil characteristics. Also, we evaluate linkages between the soil physical-thermal properties and the surface properties (hydrological conditions, geomorphic characteristics and vegetation distribution) using UAV-based aerial imaging. Data integration and analysis is supported by numerical approaches that simulate hydrological and thermal processes. Overall, this study enables the identification of watershed structure and the links between various subsurface and landscape properties in representative Arctic watersheds. Results show very distinct trends in vertically resolved soil temperature profiles and strong lateral variations over tens of meters that are linked to zones with various hydrological conditions, soil properties and vegetation

Problems of improving physical training at this stage of the transformation of the system of physical education

Directory of Open Access Journals (Sweden)

Oleksandr Aghyppo

2016-02-01

Full Text Available Purpose: building a system of recreational physical culture on the basis of taking into account the individual characteristics of physical development and physical condition of the local population. Material & Methods: analytical review of the scientific literature on the issue of the research; use the results of previous studies carried out in KSAFC in this area and published in «Slobozhanskyi science and sport bulletin» during 2015 year; the use methods of similarity and analogy, also signs semantic spaces. Results: insolubility of the problem individual approach in organizing recreational physical culture in the previous period explained lack of representation of the content of individual of norm in the assessment of physical development and methods of comparison measure the differences being compared multicomponent objects. In held scientific research were developed signs semantic spaces with the introducted in its a single measure of comparable signs it possible to establish the qualitative structure of objects to be compared with any number of comparable parameters. Obtained methods separation of equifinality results into its component quality components. It is possible to obtain methods of estimating the biological age with the establishment of the individual characteristics of its course; divide the physical condition of its component parts; obtain methods for determining the available physical preparedness depending on the characteristics of the flow of biological age and current physical condition. Conclusions: Obtained results of the research make it possible to proceed to the development of monitoring physical development, physical preparedness and physical condition of the various population groups and on this basis to create a scientifically based of system improving physical training on the basis of which to develop a complex of "ready to work and defense of the fatherland".

Seasonal variations in physical characteristics of aerosol particles at the King Sejong Station, Antarctic Peninsula

Directory of Open Access Journals (Sweden)

J. Kim

2017-11-01

Full Text Available Seasonal variability in the physical characteristics of aerosol particles sampled from the King Sejong Station in the Antarctic Peninsula was investigated over the period between March 2009 and February 2015. Clear seasonal cycles for the total particle concentration (CN were observed. The mean monthly concentration of particles larger than 2.5 nm (CN2.5 was highest during the austral summer, with an average value of 1080.39 ± 595.05 cm−3, and lowest during the austral winter, with a mean value of 197.26 ± 71.71 cm−3. The seasonal patterns in the concentrations of cloud condensation nuclei (CCN and CN coincide, with both concentrations being at a minimum in winter and maximum in summer. The measured CCN spectra were approximated by fitting a power-law function relating the number of CCN for a given supersaturation (SS to each SS value, with fitting coefficients C and kT. The values for C varied from 6.35 to 837.24 cm−3, with a mean of 171.48 ± 62.00 cm−3. The values for kT ranged from 0.07 to 2.19, with a mean of 0.41 ± 0.10. In particular, the kT values during the austral summer were higher than those during the winter, indicating that aerosol particles are more sensitive to SS changes during summer. Furthermore, the annual mean hygroscopicity parameter, κ, was estimated as 0.15 ± 0.05, for a SS of 0.4 %. The effects of the origin and pathway travelled by the air mass on the physical characteristics of the aerosol particles were also determined. The modal diameter of aerosol particles originating in the South Pacific Ocean showed a seasonal variation varying from 0.023 µm in winter to 0.034 µm in summer for the Aitken mode, and from 0.086 µm in winter to 0.109 µm in summer for the accumulation mode.

Etching characteristics and application of physical-vapor-deposited amorphous carbon for multilevel resist

International Nuclear Information System (INIS)

Kim, H. T.; Kwon, B. S.; Lee, N.-E.; Park, Y. S.; Cho, H. J.; Hong, B.

2008-01-01

For the fabrication of a multilevel resist (MLR) based on a very thin, physical-vapor-deposited (PVD) amorphous carbon (a-C) layer, the etching characteristics of the PVD a-C layer with a SiO x hard mask were investigated in a dual-frequency superimposed capacitively coupled plasma etcher by varying the following process parameters in O 2 /N 2 /Ar plasmas: high-frequency/low-frequency combination (f HF /f LF ), HF/LF power ratio (P HF /P LF ), and O 2 and N 2 flow rates. The very thin nature of the a-C layer helps to keep the aspect ratio of the etched features low. The etch rate of the PVD a-C layer increased with decreasing f HF /f LF combination and increasing P LF and was initially increased but then decreased with increasing N 2 flow rate in O 2 /N 2 /Ar plasmas. The application of a 30 nm PVD a-C layer in the MLR structure of ArF PR/BARC/SiO x /PVD a-C/TEOS oxide supported the possibility of using a very thin PVD a-C layer as an etch-mask layer for the TEOS-oxide layer

The importance of the food and physical activity environments.

Science.gov (United States)

Oppert, Jean-Michel; Charreire, Hélène

2012-01-01

There is increasing interest in identifying characteristics of neighborhood environments (physical, social, economical) that might favor unhealthy dietary and physical activity patterns leading to excess weight at population level. Measurement of characteristics of the physical environment in relation to food and physical activity has greatly improved in recent years. Methods based on assessment of perceptions by residents of their neighborhood or on objective assessment of the actual built environment (such as provided by Geographic Information Systems tools) would benefit to be combined. A number of recent systematic reviews have updated our knowledge on relationships of food and physical activity environments with relevant behaviors and obesity. Available evidence appears to show more consistent evidence of association between built environment characteristics related to physical activity ('walkability' indices, land use mix, variety of transports. . .) with physical activity behavior than with weight status. In contrast, built environment characteristics related to food habits (accessibility to different types of food outlets, availability of healthy foods. . .) would be more consistently associated with weight status than with eating behavior. The need for data from different countries and cultures is emphasized, as much as the importance of transdisciplinary research efforts for translation of these findings into our living environment. Copyright © 2012 Nestec Ltd., Vevey/S. Karger AG, Basel.

Analysis of physical characteristics of vegetable oils

Energy Technology Data Exchange (ETDEWEB)

Piamba Tulcan, Oscar Edwin [Universidade Nacional da Colombia (UNAL), Bogota (Colombia). Fac. de Ingenieria; Universidade Federal Fluminense (PGMEC/UFF), Niteroi, RJ (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica], E-mail: oepiambat@unal.edu.co; Andrade, Danielle Oliveira de; Andrade, Ednilton Tavares de [Universidade Federal Fluminense (TER/UFF), Niteroi, RJ (Brazil). Dept. de Engenharia Agricola e do Meio Ambiente; Pereira, Roberto Guimaraes [Universidade Federal Fluminense (TER/UFF), Niteroi, RJ (Brazil). Dept. de Engenharia Mecanica

2008-07-01

Different vegetable oils were characterized using standardized methods. The evaluated characteristics were density, viscosity, flow point, cloud point and corrosion. The obtained data was tabulated and compared with average composition values of oils in percentage of fatty acids and iodine number for each oil. In this analysis it is shown that viscosity decreases with the increase of the iodine number, and density decrease. The cloud and flow point have greater relation with the presence of saturated or highly unsaturated fatty acids, respectively. The index of corrosion is greater when oil saturation or its iodine number are increased. (author)

Forward physics with CMS

CERN Document Server

Grothe, Monika

2008-01-01

Forward physics with CMS at the LHC covers a wide range of physics subjects, including very low-x_Bj QCD, underlying event and multiple interactions characteristics, gamma-mediated processes, shower development at the energy scale of primary cosmic ray interactions with the atmosphere, diffraction in the presence of a hard scale and even MSSM Higgs discovery in central exclusive production. Selected feasibility studies to illustrate the forward physics potential of CMS are presented.

U-shaped associations between time in bed and the physical and mental functioning of Japanese civil servants: the roles of work, family, behavioral and sleep quality characteristics.

Science.gov (United States)

Sekine, M; Tatsuse, T; Cable, N; Chandola, T; Marmot, M

2014-09-01

This study aimed to evaluate (i) whether work, family, behavioral and sleep quality characteristics differ among individuals with different time in bed (TIB), and (ii) whether and how much the U-shaped associations between TIB and health can be explained by these characteristics. Participants were 3510 employees (2371 males and 1139 females) aged 20-65 years working in local government in Japan. They completed a questionnaire regarding work, family, and behavioral characteristics. Sleep quality and physical and mental functioning were evaluated using the Pittsburgh Sleep Quality Index and the Short Form 36. High job demands, long work hours, and high work-family conflict were more prevalent among those with short TIB. Those with long TIB had daily drinking habits. Whereas those with short TIB had poor sleep, mainly due to poor subjective sleep quality and daytime dysfunction, those with long TIB had poor sleep, mainly due to long sleep latency, poor sleep efficiency and sleep disturbances. The U-shaped associations between TIB and poor physical and mental health, with the best health observed in those spending ~8 h in bed, weakened considerably after adjustment for sleep quality, followed by work and family characteristics. After adjusting for behavioral characteristics and long-standing illnesses, the associations hardly changed. The U-shaped associations between TIB and health may be explained by U-shaped associations between TIB and poor sleep and psychosocial stress in work and family life. Copyright © 2014 Elsevier B.V. All rights reserved.

Sifat Fisik Daging Sapi, Kerbau dan Domba pada Lama Postmortem yang Berbeda (Physical Characteristics of Beef, Buffalo and Lamb Meat on Different Postmortem Periods

Directory of Open Access Journals (Sweden)

Komariah (Komariah

2012-02-01

buffalo meat and lamb. The mean shear force of beef (6.73±0.16 kg/cm2 and buffalo meat (6.53±0.38 kg/cm2 were significantly (P<0.05 higher than lamb (5.24±0.93 kg/cm2. (Key words: Physical characteristic, Postmortem, Beef, Buffalo, and Lamb meat

Physical and chemical characteristics of products from the torrefaction of yellow poplar (Liriodendron tulipifera).

Science.gov (United States)

Kim, Young-Hun; Lee, Soo-Min; Lee, Hyoung-Woo; Lee, Jae-Won

2012-07-01

We investigated the characteristics of torrefied yellow poplar (Liriodendron tulipifera) depending on reaction time (30 min) and temperature (240-280 °C). The thermogravimetric, grindability and calorific value of torrefied biomass were analyzed. As the torrefaction temperature increased, the carbon content of torrefied biomass increased from 49.50% to 54.42%, while the hydrogen and oxygen contents decreased from 6.09% to 5.65% and 28.71% to 26.61%, respectively. The highest calorific value was 1233 kJ/kg when torrefaction was performed at 280 °C for 30 min. An overall increase in energy density and decrease in mass and energy yield was observed with the increase in torrefaction temperature. The analysis of thermal decomposition demonstrated that the hemicelluloses contained in torrefied biomass decreased with increasing torrefaction temperature, whereas cellulose and lignin were only slightly affected. The grindability of torrefied biomass was significantly improved when torrefaction was performed at high temperature. Torrefaction of yellow poplar improved the chemical and physical fuel properties of the biomass. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

Predictors of race time in male Ironman triathletes: physical characteristics, training, or prerace experience?

Science.gov (United States)

Knechtle, Beat; Wirth, Andrea; Rosemann, Thomas

2010-10-01

The aim of the present study was to assess whether physical characteristics, training, or prerace experience were related to performance in recreational male Ironman triathletes using bi- and multivariate analysis. 83 male recreational triathletes who volunteered to participate in the study (M age 41.5 yr., SD = 8.9) had a mean body height of 1.80 m (SD = 0.06), mean body mass of 77.3 kg (SD = 8.9), and mean Body Mass Index of 23.7 kg/m2 (SD = 2.1) at the 2009 IRONMAN SWITZERLAND competition. Speed in running during training, personal best marathon time, and personal best time in an Olympic distance triathlon were related to the Ironman race time. These three variables explained 64% of the variance in Ironman race time. Personal best marathon time was significantly and positively related to the run split time in the Ironman race. Faster running while training and both a fast personal best time in a marathon and in an Olympic distance triathlon were associated with a fast Ironman race time.

Wetting and other physical characteristics of polycarbonate surface textured using laser ablation

Energy Technology Data Exchange (ETDEWEB)

Yilbas, B.S., E-mail: bsyilbas@kfupm.edu.sa [ME Department, King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia); Khaled, M. [CHEM Department, King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia); Abu-Dheir, N.; Al-Aqeeli, N.; Said, S.A.M. [ME Department, King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia); Ahmed, A.O.M. [CHEM Department, King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia); Varanasi, K.K.; Toumi, Y.K. [Mechanical Engineering, Massachusetts Institute of Technology, Boston (United States)

2014-11-30

Highlights: • Laser causes micro/nano size pores and shallow fine-size cavities. • Crystallinity at surface is 18% after laser treatment increasing hydrophobicity. • Surface hydrophobicity improves after laser treatment. • Microhardness increases twofold after laser treatment process. • Residual stress is compressive and scratch hardness is 110 ± 11 MPa. • Optical transmittance reduces by 15% after laser treatment. - Abstract: Surface texturing of polycarbonate glass is carried out for improved hydrophobicity via controlled laser ablation at the surface. Optical and physical characteristics of the laser treated layer are examined using analytical tools including optical, atomic force, and scanning electron microscopes, Fourier transform infrared spectroscopy, and X-ray diffraction. Contact angle measurements are carried out to assess the hydrophobicity of the laser treated surface. Residual stress in the laser ablated layer is determined using the curvature method, and microhardnes and scratch resistance are analyzed using a micro-tribometer. Findings reveal that textured surfaces compose of micro/nano pores with fine cavities and increase the contact angle to hydrophobicity such a way that contact angles in the range of 120° are resulted. Crystallization of the laser treated surface reduces the optical transmittance by 15%, contributes to residual stress formation, and enhances the microhardness by twice the value of untreated polycarbonate surface. In addition, laser treatment improves surface scratch resistance by 40%.

Physical characteristics that predict involvement with the ball in recreational youth soccer.

Science.gov (United States)

Ré, Alessandro H Nicolai; Cattuzzo, Maria Teresa; Henrique, Rafael Dos Santos; Stodden, David F

2016-09-01

This study examined the relative contribution of age, stage of puberty, anthropometric characteristics, health-related fitness, soccer-specific tests and match-related technical performance to variance in involvements with the ball during recreational 5-a-side small-sided (32 × 15 m) soccer matches. Using a cross-sectional design, 80 healthy male students (14.6 ± 0.5 years of age; range 13.6-15.4) who played soccer recreationally were randomly divided into 10 teams and played against each other. Measurements included height, body mass, pubertal status, health-related fitness (12-min walk/run test, standing long jump, 15-m sprint and sit-ups in 30 s), soccer-specific tests (kicking for speed, passing for accuracy and agility run with and without a ball), match-related technical performance (kicks, passes and dribbles) and involvements with the ball during matches. Forward multiple regression analysis revealed that cardiorespiratory fitness (12-min walk/run test) accounted for 36% of the variance in involvements with the ball. When agility with the ball (zigzag running) and power (standing long jump) were included among the predictors, the total explained variance increased to 62%. In conclusion, recreational adolescent players, regardless of their soccer-specific skills, may increase participation in soccer matches most through physical activities that promote improvement in cardiorespiratory fitness, muscle power and agility.

Changes in body size and physical characteristics of South African under-20 rugby union players over a 13-year period.

Science.gov (United States)

Lombard, Wayne P; Durandt, Justin J; Masimla, Herman; Green, Mervin; Lambert, Michael I

2015-04-01

This study compared changes in the body size and physical characteristics of South African under-20 rugby union players over a 13-year period. A total of 453 South African under-20 players (forwards: n = 256 and backs: n = 197) underwent measurements of body mass, stature, muscular strength, endurance, and 10- and 40-m sprint times. A 2-way analysis of variance was used to determine significant differences for the main effects of position (forwards vs. backs) and time (1998-2010). The pooled data showed that forwards were significantly heavier (22%), taller (5%), and stronger (18%) than the backs. However, when 1 repetition maximum strength scores were adjusted for body mass, backs were stronger per kg body mass. Stature did not change over the 13-year period for both groups. There were, however, significant increases in muscular strength (50%), body mass (20%), and muscular endurance (50%). Furthermore, an improvement in sprint times over 40 (4%) and 10 m (7%) was evident over the period of the study. In conclusion, the players became heavier, stronger, taller, and improved their upper-body muscular endurance over the 13 years of the study. Furthermore, sprint times over 10 and 40 m improved over the same time period despite the increase in body mass. It can be speculated that the changes in physical characteristics of the players over time are possibly a consequence of (a) adaptations to the changing demands of the game and (b) advancements in training methods.

Comparative study of soil physical characteristics of Jaipur district ...

African Journals Online (AJOL)

Journal Home > Vol 11, No 1 (2017) > ... resulted into huge erosion of the top fertile soil and leaving the land unproductive for agriculture production. ... the variation of physical properties and thus to better planning to work in agricultural field.

Varietal and harvesting time effects on physical characteristics and ...

African Journals Online (AJOL)

SARAH

2014-10-31

Oct 31, 2014 ... characteristics and acceptability of boiled fresh yellow maize hybrids. Methodology and ... bridge the hunger gap after a long dry season(. Osanyintola ... and produced lower yields of prime grits when milled dry (Rutledge ...

Physical properties and pyrolysis characteristics of rice husks in different atmosphere

Directory of Open Access Journals (Sweden)

Xinsheng Wang

Full Text Available This paper explores the physical properties and pyrolysis characteristics of rice husk combustion in air and in argon. The SEM results show that the outer epidermis of combusted RHIR (rice husk in air is well organized with features that include papillae shapes and full, straight, high ridges. The inner epidermis of the RHIR has long rectangular furrow tissues. The results also show that the outer epidermis of pyrolyzed RHR (rice husk in argon has ridges that are not as straight as for the RHIR and the top of the papillae have small holes. The inner surface of the RHR looks a some cracked. XPS analysis shows that the surfaces of RHIR and RHR contain carbon, oxygen, and silicon. The carbon was found to be in the elemental graphite form, the oxygen in the −2 oxidation state, and the silicon in the Si4+ form as SiO2. The DSC graphs have “camel peaks”, showing that an increase in rate of heating leads to an increase in the exothermic peaks. Calculations show that, initially, increased temperature leads to increased activation energy for pyrolysis, but as the temperature continues to increase, the activation energy decreases again. The frequency factor follows the same trend. In analysis of carbon content, rice husk volatile carbon content is the largest, it is about 33.94%, especially 700 °C, the carbon content of volatile minimum is about 0.33%. Keywords: Rice husk, Microstructure, Thermal analysis, Thermal properties, XPS

The physics data base

International Nuclear Information System (INIS)

Gault, F.D.

1984-01-01

The physics data base is introduced along with its associated data base management system. The emphasis is on data and their use and a classification of data and of data bases is developed to distinguish compilation organizations. The characteristics of these organizations are examined briefly and the long term consequences of the physics data base discussed. (orig.)

Comparison of chosen physical fitness characteristics of Turkish professional basketball players by division and playing position.

Science.gov (United States)

Köklü, Yusuf; Alemdaroğlu, Utku; Koçak, Fatma Ünver; Erol, A Emre; Fındıkoğlu, Gülin

2011-12-01

The purpose of the present study was to compare chosen physical fitness characteristics of Turkish professional basketball players in different divisions (first and second division) and playing positions. Forty-five professional male basketball players (14 guards, 15 forwards, 16 centers) participated in this study voluntarily. For each player, anthropometric measurements were performed, as well as a multi-stage 20 m shuttle run, isokinetic leg strength, squat jump (SJ), countermovement jump (CMJ), 10-30 meter single-sprint and T-drill agility tests. The differences in terms of division were evaluated by independent t-test and the differences by playing position were evaluated by one-way ANOVA with Post Hoc Tukey test. First division players' CMJ measurements were significantly higher than those of second division players' (p≤0.05), whereas second division players' 10 m sprint times were significantly better than those of first division players' (p≤0.05). In addition, forwards and centers were significantly taller than guards. Centers were significantly heavier and their T-drill test performances were inferior to those of forwards and guards (p≤0.05). Moreover, guards had a significantly higher maximal oxygen uptake (VO2 max) than centers. Guards and forwards showed significantly better performance in the 10 and 30 m sprint tests than centers (p≤0.05). Forwards and centers had significantly better left leg flexor strength at 180°.s(-1)(p≤0.05). In conclusion, the findings of the present study indicated that physical performance of professional basketball players differed among guards, forwards and centers, whereas there were not significant differences between first and second division players. According to the present study, court positions have different demands and physical attributes which are specific to each playing position in professional basketball players. Therefore, these results suggest that coaches should tailor fitness programs according to

Some physical characteristics of Andaman sea waters during winter

Digital Repository Service at National Institute of Oceanography (India)

RamaRaju, D.V.; Gouveia, A.D.; Murty, C.S.

Based on the data collected during the cruises of R V Gaveshani in Jan-Feb of 1979 and 1980 around the Andaman Islands, 6 transects are selected, along which the present study on some physical properties of the waters derived from the distributions...

Anthropometric characteristics, physical fitness and motor coordination of 9 to 11 year old children participating in a wide range of sports.

Science.gov (United States)

Opstoel, Katrijn; Pion, Johan; Elferink-Gemser, Marije; Hartman, Esther; Willemse, Bas; Philippaerts, Renaat; Visscher, Chris; Lenoir, Matthieu

2015-01-01

The aim of this study was to investigate to what extent 9 to 11 year old children participating in a specific sport already exhibit a specific anthropometric, physical fitness and motor coordination profile, in line with the requirements of that particular sport. In addition, the profiles in children with a different training volume were compared and possible differences in training hours per week between children from a low, moderate, and high level of physical fitness and motor coordination were investigated. Data of 620 children, 347 boys and 273 girls, who participated in the Flemish Sports Compass were used. Only the primary sport of each child was considered and six groups of sports (Ball sports, Dance, Gymnastics, Martial arts, Racquet sports and Swimming) were formed based on common characteristics. Measurements consisted of 17 tests. Independent T-tests and Mann-Whitney U-tests revealed few differences between the groups of sports and the discriminant analyses with the moderate and low active group did not show any significant results (p > .05). However, when discriminating among the high active children, a 85.2 % correct classification between six groups of sports was found (Wilks' Λ = .137 and p sport per week (2.50 ± 1.84 hours) compared to the children performing best (3.25 ± 2.60 hours) (p = .016) and the children performing above average (2.90 ± 1.96 hours) (p = .029) on physical fitness and motor coordination. The study showed that in general, children at a young age do not exhibit sport-specific characteristics, except in children with a high training volume. It is possible that on the one hand, children have not spent enough time yet in their sport to develop sport-specific qualities. On the other hand, it could be possible that they do not take individual qualities into account when choosing a sport.

Fruit physical characteristics, proximate, mineral and starch characterization of FHIA 19 and FHIA 20 plantain and FHIA 03 cooking banana hybrids.

Science.gov (United States)

Annor, George Amponsah; Asamoah-Bonti, Prudence; Sakyi-Dawson, Esther

2016-01-01

Cooking banana and plantain (Musa spp. AAB and ABB groups), have over the years been affected by pest and diseases, resulting in various organizations developing disease resistant hybrids with superior agronomic potential. The characteristics of these improved varieties needs to be studied to ascertain their suitability for use in various food systems. This study aimed at evaluating the physical characteristics, proximate and minerals composition, and characterizing the starch of plantain and a cooking banana hybrid release by Fundación Hondureña de Investigación Agrícola (FHIA), and comparing them to a local landrace in Ghana. FHIA 19 and FHIA 20 plantain, Apentu pa (a local landrace) and FHIA 03 cooking banana hybrid were used for the study. Their physical characteristics, proximate and mineral composition were determined at the proximal, midsection and distal hand positions. Starch granules and cells were then examined under light microscope. Ranges obtained for protein content for FHIA 20, FHIA 03 and FHIA 19 were 3.01-3.40, 2.66-2.91 and 2.81-2.91 %. Potassium was found to be the most abundant mineral in all the cultivars. The highest mean value of 982.5-1013.76 mg/100 g was obtained for FHIA 19. There were significant differences (p < 0.05) in the proximate and mineral composition of the varieties, however no significant difference exited between the hand positions. The largest starch granule size was found in FHIA 19 hybrid. FHIA 03 was also composed predominantly of two types: longitudinal and rounded granules with each type grouped together. The new plantain hybrids compared very well with the local landrace hence making them suitable to be incorporated into local food systems.

Gas Permeation Characteristics across Nano-Porous Inorganic Membranes

Directory of Open Access Journals (Sweden)

M.R Othman, H. Mukhtar

2012-10-01

Full Text Available An overview of parameters affecting gas permeation in inorganic membranes is presented. These factors include membrane physical characteristics, operational parameters and gas molecular characteristics. The membrane physical characteristics include membrane materials and surface area, porosity, pore size and pore size distribution and membrane morphology. The operational parameters include feed flow rate and concentration, stage cut, temperature and pressure. The gas molecular characteristics include gas molecular weight, diameter, critical temperature, critical pressure, Lennard-Jones parameters and diffusion volumes. The current techniques of material characterization may require complementary method in describing microscopic heterogeneity of the porous ceramic media. The method to be incorporated in the future will be to apply a stochastic model and/or fractal dimension. Keywords: Inorganic membrane, surface adsorption, Knudsen diffusion, Micro-porous membrane, permeation, gas separation.

Characteristics of synchrotron radiation

International Nuclear Information System (INIS)

Brown, G.S.

1984-01-01

The characteristics and production of synchrotron radiation are qualitatively discussed. The spectral properties of wigglers and undulators are briefly described. Possible applications in condensed matter physics are outlined. These include atomic and molecular studies, crystallography, impurities in solids and radiographic imaging

Experimental investigation of spray characteristics of alternative aviation fuels

International Nuclear Information System (INIS)

Kannaiyan, Kumaran; Sadr, Reza

2014-01-01

Highlights: • Physical properties of GTL fuel are different from those of conventional jet fuels. • Spray characteristics of GTL and Jet A-1 fuels are experimentally investigated using phase Doppler anemometry. • Regions near the nozzle are influenced by differences in fuel physical properties. • Spray characteristics of GTL can be predicted by empirical relations developed for conventional jet fuels. - Abstract: Synthetic fuels derived from non-oil feedstock are gaining importance due to their cleaner combustion characteristics. This work investigates spray characteristics of two Gas-to-Liquid (GTL) synthetic jet fuels from a pilot-scale pressure swirl nozzle and compares them with those of the conventional Jet A-1 fuel. The microscopic spray parameters are measured at 0.3 and 0.9 MPa injection pressures at several points in the spray using phase Doppler anemometry. The results show that the effect of fuel physical properties on the spray characteristics is predominantly evident in the regions close to the nozzle exit at the higher injection pressure. The lower viscosity and surface tension of GTL fuel seems to lead to faster disintegration and dispersion of the droplets when compared to those of Jet A-1 fuel under atmospheric conditions. Although the global characteristics of the fuels are similar, the effects of fuel properties are evident on the local spray characteristics at the higher injection pressure

Physical Activity and Body Mass Index

Science.gov (United States)

Nelson, Candace C.; Wagner, Gregory R.; Caban-Martinez, Alberto J.; Buxton, Orfeu M.; Kenwood, Christopher T.; Sabbath, Erika L.; Hashimoto, Dean M.; Hopcia, Karen; Allen, Jennifer; Sorensen, Glorian

2014-01-01

Background The workplace is an important domain for adults, and many effective interventions targeting physical activity and weight reduction have been implemented in the workplace. However, the U.S. workforce is aging and few studies have examined the relationship of BMI, physical activity, and age as they relate to workplace characteristics. Purpose This paper reports on the distribution of physical activity and BMI by age in a population of hospital-based healthcare workers and investigates the relationships among workplace characteristics, physical activity, and BMI. Methods Data from a survey of patient care workers in two large academic hospitals in the Boston area were collected in late 2009 and analyzed in early 2013. Results In multivariate models, workers reporting greater decision latitude (OR=1.02; 95% CI=1.01, 1.03) and job flexibility (OR=1.05; 95% CI=1.01, 1.10) reported greater physical activity. Overweight and obesity increased with age (pworkplace characteristics. Sleep deficiency (OR=1.56; 95% CI=1.15, 2.12) and workplace harassment (OR= 1.62; 95% CI=1.20, 2.18) were also associated with obesity. Conclusions These findings underscore the persistent impact of the work environment for workers of all ages. Based on these results, programs or policies aimed at improving the work environment, especially decision latitude, job flexibility and workplace harassment should be included in the design of worksite-based health promotion interventions targeting physical activity or obesity. PMID:24512930

Physical and Social-Motivational Contextual Correlates of Youth Physical Activity in Underresourced Afterschool Programs

Science.gov (United States)

Zarrett, Nicole; Sorensen, Carl; Cook, Brittany Skiles

2015-01-01

Afterschool programs (ASPs) have become increasingly recognized as a key context to support youth daily physical activity (PA) accrual. The purpose of the present study was to assess the physical and social-motivational climate characteristics of ASPs associated with youth PA, and variations in contextual correlates of PA by youth sex. Systematic…

Physical, milling, cooking, and pasting characteristics of different rice varieties grown in the valley of Kashmir India

Directory of Open Access Journals (Sweden)

Tanveer Ahmad Rather

2016-12-01

Full Text Available In the present study, three different rice varieties, namely frome chena (FC, safaid chena (SC, and barkat chena (BC, were evaluated for various quality aspects in terms of physical, milling, cooking, and pasting characteristics. Among the three rice varieties SC had the highest thousand kernel weight and length breadth ratio (L/B. While as, BC had the lowest thousand kernel weight and FC had lowest L/B. Bulk density was found to be highest for FC followed by SC and BC. FC had density of 769.01 kg/m3. Milling characteristic in terms of broken percentage and head rice yield showed non-significant difference between the varieties. Head rice yield was below 70% in all the three varieties. All the three varieties took similar time to cook and cooking time varied non-significantly between 23.66 and 25.83 min. L/B ratio after cooking was found to be highest for FC followed by BC and SC. Elongation ratio of rice after cooking did not varied significantly between varieties. Elongation ratio after cooking ranged from 1.60 to 1.70. Pasting profile of rice flour was determined using rapid visco analyzer. Significant difference was observed in pasting profile of studied rice varieties.

Effects of regular aerobic exercise on physical characteristics, body ...

African Journals Online (AJOL)

... did not participate in any special kind of physical activity. In addition to administering the Body Image Satisfaction Questionnaire and the Self-efficacy Scale, anthropometric variables were assessed before the commencement of the study and again immediately afterwards. The data were analysed by a one-way ANCOVA.

Characteristics of misreporters of dietary intake and physical activity

DEFF Research Database (Denmark)

Rasmussen, Lone Banke; Matthiessen, Jeppe; Biltoft-Jensen, Anja Pia

2007-01-01

a physical activity questionnaire (PAQ). Misreporters were defined as subjects outside the 95% confidence limits of agreement between El or EE reported/EE measured. Setting: Free-living Danish volunteers. Subjects: One hundred and thirty-eight volunteers aged between 20 and 59 years. Results: Body mass index...

Anthropometric and physical performance characteristics of professional handball players: influence of playing position.

Science.gov (United States)

Schwesig, René; Hermassi, Souhail; Fieseler, Georg; Irlenbusch, Lars; Noack, Frank; Delank, Karl-Stefan; Shephard, Roy J; Chelly, Mohamed-Souhaiel

2017-11-01

The aims of the study were to examine the anthropometric and physical performance characteristics of professional handball players classified by playing position. Twenty-one competitors (age: 25.2±5.1 years) were categorized as backs, pivots, wings or goalkeepers. Measures included anthropometrics (body height and mass), scores on the Yo-Yo Intermittent Recovery Test (total distance covered, TD), repeated-sprint ability (6 repetitions of 2x15-m shuttle sprints with recording of best time for a single trial, RSAbest) and performance on a complex handball test (HBKT) of throw slap (TS) and throw jump (TJ) with and without precision. The anthropometric data revealed a significantly lower body height for wings and pivots than for goalkeepers. Wings, pivots and goalkeepers were significantly shorter than backs, but had a similar BMI. The TD was greater for the wings (2.400 m) than for backs (1.832 m) and pivots (2.067m). Wings also achieved a better RSAbest (5.41 s) than backs (5.68 s) or pivots (5.82 s). Body height was significantly related to throw slap (TS) and jump (JT) (r=0.53, Phandball players by modifying both intermittent aerobic and anaerobic endurance components of training sessions.

A life course examination of the physical environmental determinants of physical activity behaviour: A "Determinants of Diet and Physical Activity" (DEDIPAC) umbrella systematic literature review.

Science.gov (United States)

Carlin, Angela; Perchoux, Camille; Puggina, Anna; Aleksovska, Katina; Buck, Christoph; Burns, Con; Cardon, Greet; Chantal, Simon; Ciarapica, Donatella; Condello, Giancarlo; Coppinger, Tara; Cortis, Cristina; D'Haese, Sara; De Craemer, Marieke; Di Blasio, Andrea; Hansen, Sylvia; Iacoviello, Licia; Issartel, Johann; Izzicupo, Pascal; Jaeschke, Lina; Kanning, Martina; Kennedy, Aileen; Lakerveld, Jeroen; Chun Man Ling, Fiona; Luzak, Agnes; Napolitano, Giorgio; Nazare, Julie-Anne; Pischon, Tobias; Polito, Angela; Sannella, Alessandra; Schulz, Holger; Sohun, Rhoda; Steinbrecher, Astrid; Schlicht, Wolfgang; Ricciardi, Walter; MacDonncha, Ciaran; Capranica, Laura; Boccia, Stefania

2017-01-01

Participation in regular physical activity is associated with a multitude of health benefits across the life course. However, many people fail to meet PA recommendations. Despite a plethora of studies, the evidence regarding the environmental (physical) determinants of physical activity remains inconclusive. To identify the physical environmental determinants that influence PA across the life course. An online systematic literature search was conducted using MEDLINE, ISI Web of Science, Scopus and SPORTDiscus. The search was limited to studies published in English (January 2004 to April 2016). Only systematic literature reviews (SLRs) and meta-analyses (MAs) of observational studies, that investigated the association between physical determinants and physical activity outcomes, were eligible for inclusion. The extracted data were assessed on the importance of determinants, strength of evidence and methodological quality. The literature search identified 28 SLRs and 3 MAs on 67 physical environmental characteristics potentially related to physical activity that were eligible for inclusion. Among preschool children, a positive association was reported between availability of backyard space and outdoor toys/equipment in the home and overall physical activity. The availability of physical activity programs and equipment within schools, and neighbourhood features such as pedestrian and cyclist safety structure were positively associated with physical activity in children and adolescents. Negative street characteristics, for example, lack of sidewalks and streetlights, were negatively associated with physical activity in adults. Inconsistent associations were reported for the majority of reviewed determinants in adults. This umbrella SLR provided a comprehensive overview of the physical environment determinants of physical activity across the life course and has highlighted, particularly amongst youth, a number of key determinants that may be associated with overall

Physical and chemical characteristics of off vine ripened mango ...

African Journals Online (AJOL)

The need to develop the best off vine mango ripening technique for both consumption and processing was investigated. Some physical and chemical measurements were performed on mature Green Dodo mangoes before and during a 3-day and 6-day ripening period by smoked pit ripening (SPR), ethylene (fruit ...

Flammability characteristics of LPG

International Nuclear Information System (INIS)

Cardillo, Paolo

2005-01-01

The use of LPG is continuous increase not only in the domestic field but also in the field of the transports. Consequently, there is a renewed interest for its flammability characteristics in order to decide the necessary conditions of safety. The main components of LPG are hydrocarbons containing three or four carbon atoms. The normal components of LPG are propane and butane; small concentrations of other hydrocarbons (isobutene, propylene, butane, ethane, pentane) may also be present. Different mixtures of LGP have different and physical characteristics with a different behavior during the use. Also flammability characteristics can be different according to the composition. In this paper at firsts the flammability characteristics of the main components of LGP, taken singularly, are examinated; subsequently some examples of calculation of the flammability limits of different mixture are reported [it

A longitudinal examination of the influence of maturation on physical self-perceptions and the relationship with physical activity in early adolescent girls.

Science.gov (United States)

Knowles, Ann-Marie; Niven, Ailsa G; Fawkner, Samantha G; Henretty, Joan M

2009-06-01

This longitudinal study investigated the influence of maturation on physical self-perceptions and the relationship with physical activity in early adolescent girls (N=150; mean age=12.79+/-0.31). Physical characteristics were measured and participants completed the Physical Activity Questionnaire for Children, the Children and Youth Physical Self-Perception Profile and the Pubertal Development Scale on two occasions 12 months apart. The results demonstrated a decrease in overall physical activity levels over 12 months which was not influenced by maturational status or physical characteristics. Additional analysis indicated that physical self-perceptions partially accounted for the explained variance in physical activity change, with physical condition being an important individual predictor of physical activity. Further analysis indicated that body mass was an important individual predictor of changes in perceptions of body attractiveness and physical self-worth. At this age maturation has a limited influence on the physical activity behaviours of early adolescent girls and although the variance in physical activity was partly accounted for by physical self-perceptions, this was a relatively small contribution and other factors related to this drop in physical activity need to be considered longitudinally.

Analysis of bone mellow density in adults of domestic local area using multi-detector computed tomography: Focus on correlation about eating habits, lifestyle, physical features and social characteristics

International Nuclear Information System (INIS)

Lee, Tae Hui; Kim, Tae Hyung; So, Woon Young; Lim, Hei Gyeom; Lim, Cheong Hwan; Park, Myeong Hwan; Cheon, Myung Ki

2016-01-01

This study analyzed the correlation between BMD (bone mineral density) value calculated in the MDCT(multidetector computed tomography) and lifestyle, physical features and social characteristics. From July 15 2015 to June 6 2016, we converted from HU (hounsfield unit) value measured by using MDCT to T-score for BMD of 141 patients (male: 63, female: 78) in W medical center. We measured the 2nd, 3rd and 4th lumbar spine and analyzed the correlation between gender differences in BMD and lifestyle, physical features and social characteristics. Statistical significance was validated using independent sample T test with one way Anova. Gender BMD was confirmed that a statistically significant difference (p<0.05). BMD values decreased with increasing age but for the statistically men, there was no significant difference from 20s to 50s, it only showed a significant difference in 20s and 60s (p<0.001). For the statistically women, there was no significant difference from 20s to 40s. but since 50s BMD was decreased rapidly, which showed a significant difference(p<0.001). women showed significant differences for the menstruation and menopause, childbirth, alcohol, cereals and greasy food in bone mineral density (p<0.05) but there were no significant differences in men. The bone mineral density values calculated by the MDCT and lifestyle, physical features and social characteristics correlation analysis method is considered to be used as a basis for estimating the state in BMD and osteoporosis management

Analysis of bone mellow density in adults of domestic local area using multi-detector computed tomography: Focus on correlation about eating habits, lifestyle, physical features and social characteristics

Energy Technology Data Exchange (ETDEWEB)

Lee, Tae Hui [Wonju Medical Center, Wonju (Korea, Republic of); Kim, Tae Hyung; So, Woon Young; Lim, Hei Gyeom [Kangwon National University Graduate School, Wonju (Korea, Republic of); Lim, Cheong Hwan [Hanseo University, Seosan (Korea, Republic of); Park, Myeong Hwan [Daegu Health College, Daegu (Korea, Republic of); Cheon, Myung Ki [Soongsil University, Seoul (Korea, Republic of)

2016-12-15

This study analyzed the correlation between BMD (bone mineral density) value calculated in the MDCT(multidetector computed tomography) and lifestyle, physical features and social characteristics. From July 15 2015 to June 6 2016, we converted from HU (hounsfield unit) value measured by using MDCT to T-score for BMD of 141 patients (male: 63, female: 78) in W medical center. We measured the 2nd, 3rd and 4th lumbar spine and analyzed the correlation between gender differences in BMD and lifestyle, physical features and social characteristics. Statistical significance was validated using independent sample T test with one way Anova. Gender BMD was confirmed that a statistically significant difference (p<0.05). BMD values decreased with increasing age but for the statistically men, there was no significant difference from 20s to 50s, it only showed a significant difference in 20s and 60s (p<0.001). For the statistically women, there was no significant difference from 20s to 40s. but since 50s BMD was decreased rapidly, which showed a significant difference(p<0.001). women showed significant differences for the menstruation and menopause, childbirth, alcohol, cereals and greasy food in bone mineral density (p<0.05) but there were no significant differences in men. The bone mineral density values calculated by the MDCT and lifestyle, physical features and social characteristics correlation analysis method is considered to be used as a basis for estimating the state in BMD and osteoporosis management.

Parent-Adolescent Conversations about Eating, Physical Activity and Weight: Prevalence across Sociodemographic Characteristics and Associations with Adolescent Weight and Weight-Related Behaviors

Science.gov (United States)

Berge, Jerica M.; MacLehose, Richard F; Loth, Katie A.; Eisenberg, Marla E.; Fulkerson, Jayne A.; Neumark-Sztainer, Dianne

2015-01-01

This paper aims to describe the prevalence of parent-adolescent conversations about eating, physical activity and weight across sociodemographic characteristics and to examine associations with adolescent BMI, dietary intake, physical activity and sedentary behaviors. Data from two linked epidemiological studies were used for cross-sectional analysis. Parents (n=3,424; 62% females) and adolescents (n=2,182; 53.2% girls) were socioeconomically and racially/ethnically diverse. Fathers reported more parent-adolescent conversations about healthful eating and physical activity with their sons and mothers reported more weight-focused conversations with their daughters. Parents of Hispanic/Latino and Asian/Hmong youth and parents from lower SES categories engaged in more conversations about weight and size. Adolescents whose mothers or fathers had weight-focused conversations with them had higher BMI percentiles. Adolescents who had two parents engaging in weight-related conversations had higher BMI percentiles. Healthcare providers may want to talk about the types of weight-related conversations parents are having with their adolescents and emphasize avoiding conversations about weight specifically. PMID:24997555