WorldWideScience

Sample records for sculentum mill bajo

  1. Métodos de remoção da mucilagem e qualidade fisiológica de sementes de tomate (Lycopersicon esculentum, Mill. Methods of mucilage remotion and physiological quality of tomato (Lycopersicon sculentum Mill. seeds

    Directory of Open Access Journals (Sweden)

    C. Cavariani

    1994-04-01

    Full Text Available Objetivando estudar diferentes métodos de remoção da mucilagem e a qualidade de sementes de tomate (Lycopersicon esculentum Mill., conduziu-se um experimento, em delineamento inteiramente casualizado com quatro repetições. Após extração manual, sementes e mucilagens foram submetidas aos seguintes tratamentos de remoção: lavagem imediata, fermentação por três dias, ácido clorídrico a 2,5% (25 ml/kg, durante 2 horas, ácido acético a 10% (25 ml/kg de material e hidróxido de amônia a 2,5% (25 ml/kg, durante 2 horas. Seguiu-se a avaliação da qualidade fisiológica das sementes através das determinações de porcentagem de germinação e vigor, pela porcentagem de emergência em areia, condutividade elétrica e pesos das matérias verde e seca de plântulas. Os resultados permitiram concluir que os métodos de remoção por lavagem imediata, fermentação, ácido clorídrico e ácido acético comercial não afetaram a qualidade fisiológica de sementes de tomate; a porcentagem de germinação não foi afetada pelos diferentes métodos de remoção e o método hidróxido de amônia prejudica o vigor das sementes.Different methods of mucilage remotion and quality of tomato (Lycopersicon esculentum Mill. seeds were studied, in a complete randomized design experiment with four replications. After manual extraction, seeds and slimes were submitted to the following remotion treatments: immediate washing, three-day fermentation, hydrochloric acid at 2,5% (25 mg/kg for 2 hrs., acetic acid at 10% (25 ml/kg of material, and ammonia hydroxide at 2,5% (25 ml/kg, for 2 hrs.. A physiological quality evaluation of seeds was carried out through the percentage of germination and vigor, percentage of in-sand emergence, electrical conductivity, and weight of fresh and dry matters of seedlings. The results showed that the methods of immediate washing, fermentation, commercial hydrochloric and acetic acids do not affect the physiological quality of

  2. Caracterización de 14 genotipos de tomate (Lycopersicon esculentum Mill. cultivados bajo invernadero en Costa Rica

    Directory of Open Access Journals (Sweden)

    José Eladio Monge-Pérez

    2014-11-01

    Full Text Available Se caracterizaron 14 genotipos de tomate producidos bajo invernadero, tanto a nivel cualitativo como cuantitativo. Los datos muestran una amplia variabilidad entre genotipos y brindan información útil a los productores en el proceso de selección del genotipo a utilizar en su sistema productivo, según el nicho de mercado de interés. Se destacan varios genotipos de tomate tipo “cherry! y “uva” por su alto contenido de sólidos solubles, que pueden ser opciones para los consumidores que demandan un producto de alta calidad.

  3. CAPACIDAD GERMINATIVA DE GENOTIPOS DE TOMATE (Lycopersicon esculentum Mill. BAJO ESTRESES ABIÓTICOS EN DIFERENTES FOTOPERIODOS

    Directory of Open Access Journals (Sweden)

    Clotilde Andrade

    2016-04-01

    Full Text Available El presente trabajo de investigación se realizó con el objetivo de evaluar y seleccionar genotipos de tomate capaces de germinar bajo estreses abióticos. El experimento se realizó, en el laboratorio del Centro de Investigaciones Agropecuarias (CIAP de la Universidad Estatal Península de Santa Elena (UPSE, donde se probaron semillas de tomate provenientes del agricultor y certificadas, la germinación se realizó en varios días y en diferentes concentraciones de Manitol; 0 (Control, 125, 175, 225, 275 y 325mM y NaCl 0 (Control, 75, 125 y 175 mM, con dos fotoperiodos diferentes, considerando 8 y 24 horas de oscuridad, la variable evaluada fue porcentaje de germinación, cuyos datos fueron transformados a raíz de equis más uno, para luego ser procesados mediante un análisis combinado. En lo que respecta a los resultados, en las pruebas con Manitol, el Análisis de Varianza (ANDEVA, muestra diferencias estadísticas significativas al nivel del 1% de probabilidades para localidades (Días a germinación, Factor A (Concentraciones y para la Interacción AxB, pero no para Factor B (Fotoperiodos, que fue no significativo. En cuanto al porcentaje de germinación, cuando se probó la solución de manitol, a los días 6, 10, 13 y 15 los resultados fueron similares, tanto para la semilla certificada como la proveniente del agricultor, pues en ambos casos respondieron con porcentajes superiores al 7% en bajas concentraciones, mientras que en altas concentraciones de manitol fue la semilla proveniente del agricultor la que tuvo una germinación de hasta el 3%. Así también, cuando se analizó la influencia de los fotoperiodos, se encontró que el mayor porcentaje de germinación se dio para semilla proveniente del agricultor con el 6% y en la certificada con el 4%, a 24 horas de oscuridad en ambos casos, encontrándose un aumento del 2% de germinación entre el primer y último día de la evaluación. En lo que se refiere a las pruebas realizadas

  4. Diversidad de enterobacterias asociadas a frutos de tomate (Lycopersi-cum sculentum Mill y suelos de invernadero

    Directory of Open Access Journals (Sweden)

    M. Lorena Luna-Guevara

    2012-01-01

    Full Text Available El objetivo de este trabajo fue determinar la diversidad de enterobacterias presentes en suelo y tomates provenientes de tres invernaderos de fertirrigación. Estos sistemas de cultivo son una alternativa importante de producción en agricultura protegida, sin embargo, existe escasa información acerca de la calidad microbiológica de los frutos y su relación con las características químicas del suelo. Las evaluaciones del suelo consistieron en analizar el contenido de materia orgánica y pH. En los análisis microbiológicos se aislaron e identificaron enterobacterias en muestras compuestas de suelo y frutos con diferentes grados de madurez (0, 50 y 100%, utilizando medios de cultivo selectivos, diferenciales y pruebas confirmatorias con el sistema VITEK. Los patogrupos de Escherichia coli enteropatogena (EPEC y enterotoxigénica (ETEC se caracterizaron genotípicamente mediante la técnica de reacción en cadena de la polimerasa (PCR, amplificándose los genes bfpA y lngA. Con las especies identificadas se calcularon los índices de diversidad Simpson (D y Shannon-Wiener (H´ y estimador de Chao (SChao1. Las especies Enterobacter cloacae, Citrobacter freundii y C. brakii presentaron mayor frecuencia de aislamiento, EPEC y ETEC fueron identificadas en muestras de suelo y en frutos con 100% de madurez. En suelo, los porcentajes de materia orgánica se correlacionaron positivamente con los índices H´. En fruto, aunque H´ y D reflejaron comunidades bacterianas menos diversas, el aislamiento de ETEC y Shigella boydii sobre la superficie del fruto comprometen su inocuidad debido a que habitualmente se consume en forma cruda.

  5. Effects of Chemical and Organic Fertilizers on Growth, Yield and Yield Component of Tomato (Lycopersicon sculentum L.

    Directory of Open Access Journals (Sweden)

    R Mirzaei Talarposhti

    2017-03-01

    Full Text Available Introduction Although using animal manures and crop residues as a traditional method for increasing soil fertility and crop yield has a long history but Conventional agricultural systems rely on the use of chemical fertilizer due to its immediate availability of nutrients. In many of modern agricultural systems using chemical fertilizers as a fast and easiest way to reduce nutrient deficiency and increasing soil fertility is considered. Intensive and continuous use of chemical fertilizers leads to decreasing the stability and sustainability of agricultural systems and also poses major threat to environment and human health. Organic fertilizers have positive effects on physiochemical and biological attributes of soil and could be classified in three different groups (i.e. Animal manures, green manure and composts.Using animal manure not only increase soil fertility but also could result in increasing infiltration, aeration and water holding capacity of soil. The main role of these fertilizers is related to physical change in soil. Different types of composts such as municipal waste compost and vermicompost also have similar positive effects, but usually the farmers observe the main effect of these organic fertilizers in long term. In order to investigate the effects of different types of organic fertilizers on growth indexes, yield and yield component of tomato (Lycopersicon sculentum L. current experiment was conducted. Materials and Methods The experiment was conducted based on randomized complete block design (RCBD with three replications and six treatments in the research station of Shahid Beheshti University. The experimental treatments were: Control or no fertilizer (NF, chemical fertilizer (CF, cow manure (CM, poultry manure (PM, vermicompost (VC and municipal waste compost (MC. Considering nitrogen concentration in all of the treatments different amounts of these fertilizers were used based on nitrogen recommendation for the field, so in

  6. Efecto de Bombus atratus (Hymenoptera: Apidae sobre la productividad de tomate (Lycopersicon esculentum Mill. bajo invernadero en la Sabana de Bogotá, Colombia

    Directory of Open Access Journals (Sweden)

    Cure José Ricardo

    2007-06-01

    Full Text Available

    En varios países se utilizan con éxito especies de abejorros del género Bombus para la polinización de tomate, reportándose incrementos de productividad hasta del 40%. En la Sabana de Bogotá existen varias especies nativas del género, por lo que se planteó examinar su potencial, desde el punto de vista de su cría en cautiverio y de su utilización como polinizadores de tomate y otras solanáceas. En este trabajo se evaluó el potencial de la especie nativa Bombus atratus como polinizador de tomate, mediante la introducción al cultivo de colonias criadas en cautiverio. Se comparó la autopolinización espontánea de la planta, frente a la obtenida con ayuda de las obreras de B. atratus. Los frutos visitados por ellas presentaron incrementos significativos para las variables ‘peso fresco del fruto’ (40,9%, ‘número de semillas’ (103,3%, ‘diámetro ecuatorial’ (14,3% y ‘proporción de lóculos bien desarrollados’ (42,2%. La relativa facilidad para la cría de esta especie en cautiverio, y el potencial demostrado en el aumento de productividad del tomate bajo invernadero, muestran la necesidad de profundizar en estos estudios en Colombia.

  7. COMPORTAMIENTO DEL CIPRÉS (Cupressus lusitánica Mill. EN LA PRODUCCIÓN DE ÁRBOLES DE NAVIDAD BAJO CONDICIONES DE CLIMA ALTO ANDINO, VENEZUELA

    Directory of Open Access Journals (Sweden)

    J. Petit-Aldana

    2010-01-01

    Full Text Available Las condiciones agroecológicas del estado Mérida, Venezuela tienen potencialidad para establecer plantaciones de árboles de navidad con fines de comercialización. Se estudió el comportamiento silvicultural de la especie Cupressus lusitánica Mill., en condiciones de la zona alto-andina, con el fin de promocionar el cultivo de árboles de navidad entre las comunidades interesadas, El ensayo se estableció en la Estación Experimental Santa Rosa, Instituto de Investigaciones Agropecuarias de la Universidad de Los Andes. Los árboles fueron monitoreados y evaluados a lo largo de 20 meses, realizando mediciones de diámetro basal, altura total; aplicando podas apicales y de formación. Se obtuvo una sobrevivencia de 82.69 % y mortalidad de 17.31 %; altura promedio de 2.56 m. y diámetro basal de 7.79 cm, con respuestas positivas a las podas apicales y de formación. El incremento anual en altura fue de 1.51 m y de 3.80 cm en diámetro. Se concluyó que Cupressus lusitanica demostró adaptación a las condiciones ambientales del estado Mérida, de acuerdo a los parámetros evaluados.

  8. Túnel bajo el agua

    Directory of Open Access Journals (Sweden)

    Stamhuis, E.

    1964-03-01

    Full Text Available This article describes the results obtained by the Dutch Central Institute of Scientific Research when studying the problem of underwater tunnels. This Institute has sought to establish general specifications for the design of this type of tunnels, so that they shall be more efficient than those at present in use. Firstly, a study was made of the strength, waterproof qualities, and most rational type of ventilation, with a view to drawing up of general principles on this aspect of the design. An analysis is given of the shape, suitable cross sections and constructive methods, and these are compared with those adopted in the construction of underwater tunnels at present in use in America. Particular attention has been given to designs which are largely based on prefabrication and the use of factory made structural parts, and also on the transport and erection of these at the site. The author goes on to discuss the interplay of soil and water pressures, buoyancy forces, and cases in which the tunnel is subjected to important bending and shear forces on particular sections of it. In this connection care is taken to give the theoretical considerations a ready practical interpretation. In particular, a description is given of special distance pieces which connect the two tubes making up a tunnel, also the system of joining two sections of the tube, and the measure of watertightness and flexibility which such joints provide. Finally, a summary is given of the theoretical foundations, as well as a number of observations and items of advise, which are applicable to these types of structures.El ingeniero A. Eggink describió, en un trabajo publicado últimamente, un nuevo tipo de túnel bajo el agua para canalizar la circulación rodada. En este trabajo se desarrolla un análisis sobre las consideraciones que han jugado un papel predominante en la redacción del proyecto de ejecución de un túnel subacuo. Acompañan al trabajo los resultados referentes

  9. Viviendas de muy bajo coste

    Directory of Open Access Journals (Sweden)

    Lemus, V.

    1982-11-01

    Full Text Available Not available.En el Instituto de Investigaciones en Materiales de la Universidad Nacional Autónoma de México, se está desarrollando un área de investigación sobre tecnología de materiales y tecnología de sistemas constructivos, la cual está integrada por diversos proyectos encaminados a solucionar problemas relativos a la vivienda. El presente trabajo consiste en el desarrollo de materiales compuestos a base de desechos agrícolas e industriales, con características tales como baja densidad, resistencia adecuada, excelentes propiedades térmicas y acústicas y, fundamentalmente, bajo costo y gran disponibilidad. Los resultados obtenidos son bastante alentadores debido a la durabilidad y resistencia mecánica obtenidos a base del tratamiento proporcionado a la materia orgánica. Se comentan las aplicaciones actuales y futuras de estos nuevos materiales.

  10. con bajo peso al nacer

    Directory of Open Access Journals (Sweden)

    Adriana Mora Antó

    2005-01-01

    Full Text Available Esta investigación dio cuenta de la relación entre el estilo de funcionamiento familiar, los patrones de crianza y las edades de desarrollo evolutivo en niños, nacidos con bajo peso. El estudio descriptivo correlacional se realizó con 41 niños y sus madres, aplicándose cuestionarios sobre funcionamiento familiar, prácticas de crianza y desarrollo infantil. Los resultados señalaron la existencia de un funcionamiento familiar caracterizado por una cohesión amalgamada y una adaptabilidad caótica, una disciplina complaciente, falta de control y de límites claros en la díada madre-hijo. Se trataba de familias monoparentales, donde la temprana edad de concepción, el madresolterismo y el apoyo de la familia extensa eran constantes. Las edades evolutivas registradas indicaron un desarrollo inferior a la edad cronológica, en la mayor parte de los casos; sin embargo, éstas tendieron a ser superiores al compararlas con la edades reales de los infantes. No se encontró una correlación estadísticamente significativa entre la edad de desarrollo y los diferentes factores del funcionamiento familiar para algunos de los rangos de edad considerados; sin embargo, no se lo descartó por completo, especialmente en lo referente al optimismo familiar

  11. The intangible legacy of the Indonesian Bajo

    Directory of Open Access Journals (Sweden)

    Chandra Nuraini

    2016-05-01

    Full Text Available The Sama-Bajau, or Bajo diaspora, extends from the southern Philippines and Sabah (Malaysian Borneo to the eastern part of Indonesia. The Indonesian Bajo, now scattered along the coasts of Sulawesi (Celebes and East Kalimantan, the Eastern Lesser Sunda Islands and Maluku, were once mostly nomadic fishermen of the sea or ocean freight carriers. Today, the Bajo are almost all fishermen and settled. Their former and present ways of life made them favour intangible forms of culture: it is impossible to transport bulky artefacts when moving frequently by boat, or when living in stilt houses, very close to the sea or on a reef. It is therefore an intangible legacy that is the essence of the Bajo’s culture. Sandro healers have a vast range of expertise that allows them to protect and heal people when they suffer from natural or supernatural diseases. On the other hand, music and especially oral literature are very rich. In addition to song and the pantun poetry contests, the most prestigious genre is the iko-iko, long epic songs that the Bajo consider to be historical rather than fictional narratives. The Bajo’s intangible heritage is fragile, since it is based on oral transmission. In this article, I give a description of this heritage, dividing it into two areas: the knowledge that allows them to “protect and heal” on the one hand, and to “distract and relax”, on the other.

  12. Uranium milling costs

    International Nuclear Information System (INIS)

    Coleman, R.B.

    1980-01-01

    Basic process flowsheets are reviewed for conventional milling of US ores. Capital costs are presented for various mill capacities for one of the basic processes. Operating costs are shown for various mill capacities for all of the basic process flowsheets. The number of mills using, or planning to use, a particular process is reviewed. A summary of the estimated average milling costs for all operating US mills is shown

  13. Biomass torrefaction mill

    Science.gov (United States)

    Sprouse, Kenneth M.

    2016-05-17

    A biomass torrefaction system includes a mill which receives a raw biomass feedstock and operates at temperatures above 400 F (204 C) to generate a dusty flue gas which contains a milled biomass product.

  14. cultivadas bajo un gradiente de sombra

    Directory of Open Access Journals (Sweden)

    Marco V. Gutiérrez

    2007-01-01

    Full Text Available Se evaluó el crecimiento de 9 especies de palmas cultivadas bajo un gradiente de sombra producido por mallas de polipropileno negro de 40, 50, 60, 70 y 80% de sombra, más un tratamiento de malla aluminizada de 70%, y uno con plantas a pleno sol. Las especies evaluadas fueron Caryota mitis (cola de pez, Chamaedorea costaricana (pacaya, Chamaedorea tepejilote (tepejilote, Dypsis lutescens (areca, Licuala elegans (licuala, Phoenix roebelenii (fénix, Ptychosperma macarthurii (palma macarthur, Roystonea regia (palma real, y Veitchia merrillii (navideña. Se midió la altura de las plantas, la longitud de las hojas maduras, y el número de hojas cosechadas, durante 5 cosechas por 2 años. En general, la altura de las plantas y la longitud de las hojas fueron menores a 0-40% de sombra, se incrementaron a 50-70%, y decrecieron a 80%. C. mitis, C. tepejilote, L. elegans y P. macarthurii, se comportaron como especies obligadas de sombra y no sobrevivieron a pleno sol. C. costaricana y D. lutescens sobrevivieron a plena exposición solar, y su crecimiento alcanzó valores máximos a 50-60%. P. roebelenii, R. regia, y V. merrillii mostraron un crecimiento reducido a 0-40%, pero éste mejoró bajo los demás niveles de sombra a lo largo del gradiente. En general, 1-2 años es un periodo apropiado para el cultivo de palmas de crecimiento rápido (R. regia, Chamedorea spp., D. lutescens en casas de mallas. Palmas de lento crecimiento (L.elegans pueden permanecer 3-5 años en una casa de sombra. Se discute estrategias para el uso de gradientes de sombra en el tiempo y en el espacio, según la utilidad y los requerimientos de las especies, los requisitos establecidos por el mercado, y el ciclo de producción del material vegetal.

  15. Uranium Mill Tailings Management

    International Nuclear Information System (INIS)

    Nelson, J.D.

    1982-01-01

    This book presents the papers given at the Fifth Symposium on Uranium Mill Tailings Management. Advances made with regard to uranium mill tailings management, environmental effects, regulations, and reclamation are reviewed. Topics considered include tailings management and design (e.g., the Uranium Mill Tailings Remedial Action Project, environmental standards for uranium mill tailings disposal), surface stabilization (e.g., the long-term stability of tailings, long-term rock durability), radiological aspects (e.g. the radioactive composition of airborne particulates), contaminant migration (e.g., chemical transport beneath a uranium mill tailings pile, the interaction of acidic leachate with soils), radon control and covers (e.g., radon emanation characteristics, designing surface covers for inactive uranium mill tailings), and seepage and liners (e.g., hydrologic observations, liner requirements)

  16. FM Interviews: Stephanie Mills

    OpenAIRE

    Valauskas, Edward

    2002-01-01

    Stephanie Mills is an author, editor, lecturer and ecological activist who has concerned herself with the fate of the earth and humanity since 1969, when her commencement address at Mills College in Oakland, Calif., drew the attention of a nation. Her speech, which the New York Times called "perhaps the most anguished statement" of the year's crop of valedictory speeches, predicted a bleak future. According to Mills, humanity was destined for suicide, the result of overpopulation and overuse ...

  17. Viviendas de bajo costo sistema SALVY

    Directory of Open Access Journals (Sweden)

    Suárez Ibarra, Salvador

    1984-06-01

    Full Text Available The aim of this work is to offer an alternative for solving the current problem of housing, through a building system which has been developed and tested in our country — the SAL VY SYSTEM. It is directed towards solving the problem of low-cost housing with own technology, enabling these houses to be built quickly, using materials which are not traditional in building, but are abundant in our country. The house presented by us allows the user to extend its height according to his needs and financial possibilities, keeping the free area of the plot for so-called kitchen gardens.Este trabajo tiene como objetivo presentar una alternativa para la solución del problema actual de la vivienda, a través de un sistema constructivo desarrollado y experimentado en nuestro país —SISTEMA SALVY, dirigido a solucionar el problema de la vivienda de bajo costo, con una tecnología propia que permite la construcción de estas viviendas de una manera rápida, utilizando materiales no tradicionales en construcción, pero abundantes en nuestro país. La vivienda que presentamos permite al usuario ampliarla en altura, de acuerdo a sus necesidades y posibilidades económicas, manteniendo el área libre de la parcela para los denominados huertos del hogar.

  18. Túnel bajo el Elba - Hamburgo - Alemania Federal

    Directory of Open Access Journals (Sweden)

    Editorial, Equipo

    1976-03-01

    Full Text Available This important work, constructed to solve the traffic problem between the northern and Southern parts of Hamburg, has an overall length of 3,325 m. The greater part of the tunnel is provided with special aeration, supplied by three ventilation stations. The tunnel is made up of three independent! circulation tubes, each with two traffic lanes. The lateral tubes are intended for one way traffic, whereas the middle lane is designed for two way traffic. In the section under the river itself, these three tubes, along with the ventilating ducts, come together into one single rectangular piece. This particular stretch consists of eight members, which were constructed in nearby dry dock and were later sunk and laid on the river bottom, along a previously excavated trench. It was completed by means of highly advanced technological methods for sealing the joints and subsequently the trench was again covered up with the excavation material. The section under the greatest slope of the river bed was excavated by means of the method of the advancing driller pipe shield, and the end sections were so near the surface that the work was carried out in the open air. The northern ventilation station —a reinforced concrete construction, connecting sections of the tunnel— further contains the safety and control stations for the entire length of the tunnel, and is equipped with the most modern technical devices.Esta importante obra, construida para solucionar el problema del tráfico entre las zonas norte y sur de la ciudad de Hamburgo, tiene una longitud total de 3.325 m. En la mayor parte de su recorrido se utiliza un sistema de aireación especial, abastecido por tres estaciones de ventilación. El túnel está constituido por tres tubos de circulación independientes, con dos carriles cada uno. Los tubos laterales se utilizan para el tráfico en un solo sentido, mientras que el central permite la circulación en ambas direcciones. En el tramo bajo

  19. Factores asociados al bajo peso al nacer

    Directory of Open Access Journals (Sweden)

    Georgina J Peraza Roque

    2001-10-01

    Full Text Available El bajo peso al nacer (BPN ha constituido un enigma en la ciencia a través de los tiempos. Múltiples son las investigaciones realizadas acerca de las causas que lo producen y las consecuencias que provoca. Su importancia no solo radica en lo que significa en la morbilidad y la mortalidad infantil, sino que estos niños tienen habitualmente múltiples problemas posteriores. El Programa para la Reducción del BPN señala que los niños nacidos con un peso inferior a los 2 500 g presentan riesgo de mortalidad 14 veces mayor durante el primer año de vida, en comparación con los niños que nacen con un peso normal a término. Dentro de los factores de riesgo del BPN se han encontrado con mayor frecuencia en estudios realizados por diferentes autores, los siguientes: el embarazo en la adolescencia, la desnutrición en la madre, el hábito de fumar, la hipertensión arterial durante el embarazo, la sepsis cervicovaginal, la anemia y los embarazos gemelares, entre otros. Es innegable la influencia que el BPN tiene sobre las futuras generaciones, por lo que debe constituir la diana de los esfuerzos que el médico y la enfermera deben desarrollar en su prevención, sobre todo en la comunidadLow birth weight has been an enigma for Science through times. A lot of research works have been carried out about its causes and consequences. The importance of LBW not only lies in its meaning for infant mortality and morbidity but also in the many problems that low birth weight children regularly face in the future. The program for the reduction of LBW points out that newborns weighing under 2500g have during his/her first year of life a mortality risk 14 times higher than newborns with a normal weight at term. Among the low birth weight risk factors, a number of studies by various authors have frequently found the following; pregnancy at adolescence; undernourishment in mothers, smoking, blood hypertension during pregnancy, cervix-vaginal sepsis; anemia, twin

  20. Túnel bajo el puerto de Boston

    Directory of Open Access Journals (Sweden)

    Editorial, Equipo

    1963-05-01

    Full Text Available The new tunnel under Boston harbour has been constructed because of the insufficient capacity of a similar, earlier, tunnel to cope with the ever increasing road traffic. This tunnel is 1,550 ms long, and 9.50 ms in external diameter. There are two traffic lanes, each 3.20 ms wide. Inside it is faced with ceramic tiles, has fluorescent lighting, and ventilation is maintained by means of two ducts, one at each entrance, where the necessary compressor and other equipment has been situated. The most interesting feature of this important project is the excavation method adopted for its construction: the tunnel crosses a clay layer, which at certain places is sufficiently fluid to allow a pneumatic shield to be forced through it leaving hardly any debris behind. It will be readily appreciated that this procedure shows an obvious advantage over ordinary methods, in which it is necessary to cut out, and transport to the exterior all the excavated material. The metal sheathing was by the Commercial Shearing and Stamping Co., Youngstown, Ohio.Este nuevo túnel, bajo el puerto de Boston, es una consecuencia de la necesidad imperiosa que se hacía sentir dada la insuficiente capacidad del otro túnel similar antiguo y el aumento continuo del tráfico urbano y por carretera. Tiene 1.550 m de longitud, 9,50 m de diámetro exterior y una calzada con dos bandas de circulación de 3,20 m de anchura cada una. Está revestido ccn baldosa cerámica, iluminado con luz fluorescente, y el aire viciado se ventila y renueva por medio de dos torres de ventilación—una en cada portal—, en las que se han instalado el equipo mecánico adecuado de ventilación y compresores. La parte más interesante de esta importante obra estriba en los procedimientos empleados para llevar a cabo la excavación, pues atraviesa un banco de arcilla que, en ciertos tramos, es suficientemente fluida para permitir dejarse empujar y ceder paso a un escudo neumático que avanza sin apenas

  1. Effect of the milling conditions on the degree of amorphization of selenium by milling in a planetary ball mill

    International Nuclear Information System (INIS)

    Ksiazek, K; Wacke, S; Gorecki, T; Gorecki, Cz

    2007-01-01

    The effect of the milling parameters (rotation speed of the milling device and duration of milling) on the phase composition of the products of milling of fully crystalline selenium has been investigated. The milling was conducted using a planetary micromill and the phase composition of the milling products was determined by differential thermal analysis. It has been found that ball milling leads to the partial amorphization of the starting crystalline material. The content of amorphous phase in the milling products depends, in a rather complicated way, on the milling parameters. At the milling parameters adopted in the present study, the milling product was never fully amorphous. The complicated way the milling parameters affect the content of amorphous phase in the milling products is a result of competition of two processes: amorphization due to deformation and refinement of grains of milled material and crystallization of the already produced amorphous material at the cost of heat evolved in the milling vial during the milling process

  2. Uranium mill tailings

    International Nuclear Information System (INIS)

    McLaren, L.H.

    1982-11-01

    This bibliography contains information on uranium mill tailings included in the Department of Energy's Energy Data Base from January 1981 through October 1982. The abstracts are grouped by subject category as shown in the table of contents. Entries in the subject index also facilitate access by subject, e.g., Mill Tailings/Radiation Hazards. Within each category the arrangement is by report number for reports, followed by nonreports in reverse chronological order. These citations are to research reports, journal articles, books, patents, theses, and conference papers from worldwide sources. Five indexes, each preceded by a brief description, are provided: Corporate Author, Personal Author, Subject, Contract Number, and Report Number. (335 abstracts)

  3. Uranium mining and milling

    International Nuclear Information System (INIS)

    Floeter, W.

    1976-01-01

    In this report uranium mining and milling are reviewed. The fuel cycle, different types of uranium geological deposits, blending of ores, open cast and underground mining, the mining cost and radiation protection in mines are treated in the first part of this report. In the second part, the milling of uranium ores is treated, including process technology, acid and alkaline leaching, process design for physical and chemical treatment of the ores, and the cost. Each chapter is clarified by added figures, diagrams, tables, and flowsheets. (HK) [de

  4. La organización social en los barrios bajos

    Directory of Open Access Journals (Sweden)

    William Foote Whyte

    2010-07-01

    Full Text Available

    Por mucho tiempo, los sociólogos han estudiado los barrios bajos en términos de desorganización social. El interés en los mismos parece provenir de dos fuentes: una urgencia por promover reformas sociales y un esfuerzo para comprender el proceso de urbanización. Observando el quiebre de los controles del grupo primario en la vida de ciudad, algunos sociólogos han considerado analizar la situación resultante en términos del concepto de desorganización social. Los barrios bajos han sido caracterizados por ciertos sociólogos, como áreas de almas perdidas y misiones, áreas donde individuos y familias viven en intimidad forzada con personas a las cuales normalmente rechazan y evitan; áreas donde no se aprecian estándares de decencia o buena conducta excepto los impuestos por una autoridad externa. Según la opinión de otros sociólogos, los barrios bajos son un área de libertad e individualismo. Harvey Zorbaugh dice que la política en el distrito bajo no es como la política en el distrito de clase media. Como no se ajusta a los estándares de la clase media, no es más que un juego. Más aún, la preocupación con el estudio de la desorganización familiar ha conducido a algunos sociólogos a subestimar cualquier grado de organización que se pueda encontrar en los barrios bajos

  5. Evaluation of End Mill Coatings

    Energy Technology Data Exchange (ETDEWEB)

    L. J. Lazarus; R. L. Hester,

    2005-08-01

    Milling tests were run on families of High Speed Steel (HSS) end mills to determine their lives while machining 304 Stainless Steel. The end mills tested were made from M7, M42 and T15-CPM High Speed Steels. The end mills were also evaluated with no coatings as well as with Titanium Nitride (TiN) and Titanium Carbo-Nitride (TiCN) coatings to determine which combination of HSS and coating provided the highest increase in end mill life while increasing the cost of the tool the least. We found end mill made from M42 gave us the largest increase in tool life with the least increase in cost. The results of this study will be used by Cutting Tool Engineering in determining which end mill descriptions will be dropped from our tool catalog.

  6. Factores de riesgo en el bajo peso al nacer

    Directory of Open Access Journals (Sweden)

    Guillermo Díaz Alonso

    Full Text Available Se realizó un estudio retrospectivo de tipo caso control en el área del Policlínico Docente "Luis A. Turcios Lima" del municipio 10 de Octubre durante el período de 1990 a 1993, con el objetivo de identificar el comportamiento del bajo peso al nacer, establecer la existencia y la intensidad de esta entidad con los factores de riesgo seleccionados, e identificar el grado de influencia individual de dichos factores. La muestra quedó conformada por 92 recién nacidos de bajo peso y 468 con normopeso. Las variables estudiadas fueron la edad materna, la valoración ponderal, las complicaciones obstétricas, las enfermedades asociadas con la gestación, el hábito de fumar y el período intergenésico. Se aplicó el test chi-cuadrado, el odds- -ratio y el de riesgo atribuible en los nacimientos expuestos y en la población total. Todas las variables estuvieron asociadas significativamente con el bajo peso al nacer, y fueron identificadas como factores de riesgo con influencia marcada: la edad materna de 35 años o más, la amenaza de parto prematuro, la rotura prematura de membranas, la toxemia y la diabetes mellitus; con efecto moderado, el bajo peso materno, un período intergenésico menor de 1 año, la hipertensión arterial, el asma bronquial, el hábito de fumar, la sepsis urinaria, y con influencia ligera, la edad materna inferior a los 20 años.

  7. CULTIVOS BAJO CUBIERTA EN EL SURESTE DE ESPAÑA

    Directory of Open Access Journals (Sweden)

    Encarnación Gil Meseguer

    2011-01-01

    Full Text Available En España, más de 62.000 ha regadas se cultivan en ambiente controlado, bajo determinadas cubiertas. Dos tercios se localizan en Andalucía, y más de la cuarta parte, en el Sureste de la Península Ibérica. En el espacio surestino, delimitado por la coincidencia de las isolíneas climáticas (isoyeta de los 400 mm anuales e isoterma de 16ºC de TMA y la línea de costa mediterránea entre Almería y Alicante, sobresalen una serie de estructuras con cubiertas de plásticos y mallas para la producción de cultivos intensivos en las comarcas del Levante Almeriense-Bajo Almanzora, Lorca y Valle Guadalentín, Campo de Cartagena-Mar Menor, Meridional de Alicante-Vega Baja, etc. Los avances tecnológicos aplicados al riego y al ciclo natural de la planta, se incorporan al cultivo forzado bajo cubierta, logrando modificar el ciclo de cultivo, con una amplitud en los calendarios para presentar el producto en los momentos de mayor demanda. El interés de esta agricultura intensiva de invernaderos, mallas y acolchados radica en su mayor productividad, empleo y precio final del producto.

  8. Shear Roll Mill Reactivation

    Science.gov (United States)

    2012-09-13

    pneumatically operated paste dumper and belt conveyor system, the loss in weight feeder system, the hydraulically operated shear roll mill, the pellet...out feed belt conveyor , and the pack out system comprised of the metal detector, scale, and pack out empty and full drum roller conveyors . Page | 4...feed hopper and conveyor supplying the loss in weight feeder were turned on, and it was verified that these items functioned as designed . The

  9. 7 CFR 868.310 - Grades and grade requirements for the classes Long Grain Milled Rice, Medium Grain Milled Rice...

    Science.gov (United States)

    2010-01-01

    ... Grain Milled Rice, Medium Grain Milled Rice, Short Grain Milled Rice, and Mixed Milled Rice. (See also Â... Milled Rice Principles Governing Application of Standards § 868.310 Grades and grade requirements for the classes Long Grain Milled Rice, Medium Grain Milled Rice, Short Grain Milled Rice, and Mixed Milled Rice...

  10. Uranium-mill appraisal program

    International Nuclear Information System (INIS)

    Everett, R.J.; Cain, C.L.

    1982-08-01

    The results of special team appraisals at NRC-licensed uranium mills in the period May to November 1981 are reported. Since the Three Mile Island accident, NRC management has instituted a program of special team appraisals of radiation protection programs at certain NRC-licensed facilities. These appraisals were designed to identify weaknesses and strengths in NRC-licensed programs, including those areas not covered by explicit regulatory requirements. The regulatory requirements related to occupational radiation protection and environmental monitoring at uranium mills have been extensively upgraded in the past few years. In addition, there was some NRC staff concern with respect to the effectiveness of NRC licensing and inspection programs. In response to this concern and to changes in mill requirements, the NRC staff recommended that team appraisals be conducted at mills to determine the adequacy of mill programs, the effectiveness of the new requirements, and mill management implementation of programs and requirements. This report describes the appraisal scope and methodology as well as summary findings and conclusions. Significant weaknesses identified during the mill appraisals are discussed as well as recommendations for improvements in uranium mill programs and mill licensing and inspection

  11. Uranium mill tailings management

    International Nuclear Information System (INIS)

    1982-01-01

    Facilities for the disposal of uranium mill tailings will invariably be subjected to geomorphological and climatological influences in the long-term. Proceedings of a workshop discuss how the principles of geomorphology can be applied to the siting, design, construction, decommissioning and rehabilitation of disposal facilities in order to provide for long-term containment and stability of tailings. The characteristics of tailings and their behaviour after disposal influence the potential impacts which might occur in the long-term. Proceedings of another workshop examine the technologies for uranium ore processing and tailings conditioning with a view to identifying improvements that could be made in such characteristics

  12. Aulas-laboratorios de bajo costo, usando TIC

    Directory of Open Access Journals (Sweden)

    Silvia E. Calderón

    2015-01-01

    Full Text Available En este trabajo se presentan los resultados de una propuesta educativa orientada a promover el desarrollo de un pensamiento critico y un mayor interes por las ciencias experimentales. Con este fin desarrollamos propuestas de proyectos educativos susceptibles de ser destinadas a las aulas y laboratorios de las escuelas secundarias y primeros anos de la universidad, que resaltan los aspectos metodologicos de las ciencias. Aqui, realizamos una compilacion de varios proyectos, que ilustran formas de incorporar las tecnologias de la informacion y la comunicacion (TIC en diversos experimentos de ciencias, muchos de ellos publicados individualmente anteriormente, y que en conjunto se pueden utilizar para implementar un aula-laboratorio de bajo costo. Con TIC hacemos referencia a la convergencia de computadoras, sistemas audiovisuales, Internet, telefonia, y diversos equipos que se integran con algunos de ellos. Los proyectos intentan integrar areas como fisica, matematica, quimica, informatica, arte, etc. y apuntan a que los estudiantes puedan responder a las preguntas: .Como sabemos esto?, .Por que creemos en aquello? Preguntas que ilustran la naturaleza del pensamiento cientifico. Nuestra contribucion mas significativa es haber desarrollado ≪aulas-laboratorios≫ de muy bajo costo, usando TIC. Con el advenimiento de programas como ≪Una Laptop por Nino≫ que se estan implementando en varios paises de Latinoamerica, resulta oportuno utilizar este recurso como base para generar laboratorios de bajo costo, que creemos pueden ser una herramienta util para mejorar el aprendizaje de las ciencias, incentivar vocaciones y contribuir a desarrollar un pensamiento critico, a la par de desarrollar habilidades con el uso de las TIC que pueden ser de utilidad en diversos ambitos academicos y laborales.

  13. [Epiphytic algae from Bajo Pepito, Isla Mujeres, Quintana Roo, Mexico].

    Science.gov (United States)

    Quan-Young, L I; Díaz-Martín, M A; Espinoza-Avalos, J

    2006-06-01

    A total of 96 epiphytic algae species were identified from Bajo Pepito, Quintana Roo, México. 60.4% (58) belonged to the Rhodophyta, 19.79% (19) to the Phaeophyta, 16.6% (16) to the Chlorophyta and 3.1% (3) to the Cyanophyta; 49 species (50.5%) were found only in one month, while Heterosiphonia crispella was found in all of the sampled months. That species provided the largest contribution to the biomass of epiphytes. During January we registered the greater biommass and richness of epiphytes species, coincidently with high values of host species cover and rainfall.

  14. Desafío con wssv bajo fluctuaciones de temperatura

    OpenAIRE

    Sonnenholzner, Stanislaus

    2002-01-01

    Desafío con WSSV bajo fluctuaciones de temperatura En trabajos anteriores sobre el efecto de la temperatura del agua sobre la supervivencia del camarón infectado con el virus de la Mancha Blanca, se demostró que una temperatura constante de 33ºC por 8 días genera una respuesta inmune en el camarón correlacionada a una supervivencia superior al 90%, lo cual se tradujo posteriormente en una propuesta práctica de cultivo de camarón en estanques con invernaderos, actualmente en evaluación e...

  15. Japan steel mill perspective

    Energy Technology Data Exchange (ETDEWEB)

    Murase, K. [Kobe Steel Ltd., Tokyo (Japan)

    2004-07-01

    The international and Japan's steel industry, the coking coal market, and Japan's expectations from Canada's coal industry are discussed. Japan's steel mills are operating at full capacity. Crude steel production for the first half of 2004 was 55.8 million tons. The steel mills are profitable, but costs are high, and there are difficulties with procuring raw materials. Japan is trying to enhance the quality of coke, in order to achieve higher productivity in the production of pig iron. Economic growth is rising disproportionately in the BRICs (Brazil, Russia, India, and China), with a large increase in coking coal demand from China. On the supply side, there are several projects underway in Australia and Canada to increase production. These include new developments by Elk Valley Coal Corporation, Grande Cache Coal, Western Canadian Coal, and Northern Energy and Mining in Canada. The Elga Mine in the far eastern part of Russia is under development. But the market is expected to remain tight for some time. Japan envisions Canadian coal producers will provide a stable coal supply, expansion of production and infrastructure capabilities, and stabilization of price. 16 slides/overheads are included.

  16. Bioassay for uranium mill tailings

    International Nuclear Information System (INIS)

    Tschaeche, A.N.

    1986-01-01

    Uranium mill tailings are composed of fine sand that contains, among other things, some uranium (U/sup 238/ primarily), and all of the uranium daughters starting with /sup 230/Th that are left behind after the usable uranium is removed in the milling process. Millions of pounds of tailings are and continue to be generated at uranium mills around the United States. Discrete uranium mill tailings piles exist near the mills. In addition, the tailings materials were used in communities situated near mill sites for such purposes as building materials, foundations for buildings, pipe runs, sand boxes, gardens, etc. The Uranium Mill Tailings Remedial Action Project (UMTRAP) is a U.S. Department of Energy Program designed with the intention of removing or stabilizing the mill tailings piles and the tailings used to communities so that individuals are not exposed above the EPA limits established for such tailings materials. This paper discusses the bioassay programs that are established for workers who remove tailings from the communities in which they are placed

  17. Indian Americans at Mille Lacs.

    Science.gov (United States)

    Holbert, Victoria L.; And Others

    The Training Center for Community Programs prepared a report on the Mille Lacs (Chippewa) Reservation in Minnesota. Data for the report were from 2 separate sources: a survey conducted by the Training Center with the assistance of the Mille Lacs community action program (1967) and an attitudinal survey conducted by Victoria Holbert during 1969.…

  18. Bajo materialismo y surrealismo. El debate Bataille-Breton

    Directory of Open Access Journals (Sweden)

    Noelia Denise Dunan

    2015-01-01

    Full Text Available Hacia 1923 Georges Bataille era un joven desconocido que comenzaba a entablar amistades y también enemistades en el núcleo del movimiento surrealista e intelectual de París. Alentado por algunos de aquellos vínculos, lee a Mauss y Durkheim, Nietzsche y Freud y, comienza a delinear un pensamiento que se plasmará en la creación de Documents. Resulta difícil comprender la relevancia de esta revista y la producción batailleana sin referir a sus primeras lecturas y al debate que tempranamente entabló con el máximo exponente del movimiento surrealista, André Breton. Bataille coordinó allí un grupo de disidentes y convirtió la publicación en una máquina contra el surrealismo. El presente artículo desarrolla la formación de Bataille para hacer hincapié en la categoría de bajo materialismo construida en tensión entre el idealismo surrealista y los distintos materialismos. Así puede verse que Documents y el bajo materialismo conjugan las preocupaciones que perseguirá toda su vida.

  19. Perubahan Sosial Pada Komunitas Suku Bajo Di Pesisir Teluk Tomini

    Directory of Open Access Journals (Sweden)

    Muhammad Obie

    2016-06-01

    Full Text Available Abstract: Society and culture of human being always change as an ever –present phenomena in the world. A distinction is sometimes made then between processes of change within the social structure, which serve in part to maintain the structure, and, even the processes itself can be slow or fast through evolusion and revolusion.   One of the factors that quicken the social change process is the government interventions. This study aims at analyzing the social change on the Bajo Tribe community as the impact of various government programs at Tomini bay coastal. This research used strategy of historical sociology. The kinds of data collected were primer and secondary data that were analyzed by using qualitative approac. The result showed that various   government programs at Tomini bay, such as designating conservation area, granting concession license to private sectors through forest concession right (FCR, indefeasible right of use (IRU, and fishing industry at the bay had caused the loss of access of the Bajo tribe community to coastal and marine resources area. Various interventions of government programs had implication on resettlement of the Bajo tribe community, causing the Bajo tribe divided into sea Bajo and land Bajo. The loss of access of the Bajo tribe to coastal and marine resources caused traditional institution weaken which made its philosophy of living in harmony with nature, and  conservation ethics fade away, its local wisdom, and self identity lose, and its social capital destructed.  الملخص: كان المجتمع وحضارته متغيّرين في أيّ كان المجتمع وهذه الحضارة. ويكون الفرق في كون هذا التغيّر. قد تكون عملية التغيّر متمهّلة أو سريعة وقد تكون عن طريق التطوّر والثّورة. وأحد العناصر المسرعة في عملية هذا التغيّر هو تدخّل الحكومة. حاولت هذه

  20. Wear of micro end mills

    DEFF Research Database (Denmark)

    Bissacco, Giuliano; Hansen, Hans Nørgaard; De Chiffre, Leonardo

    2005-01-01

    This paper addresses the important issue of wear on micro end mills considering relevant metrological tools for its characterization and quantification. Investigation of wear on micro end mills is particularly difficult and no data are available in the literature. Small worn volumes cause large...... part. For this investigation 200 microns end mills are considered. Visual inspection of the micro tools requires high magnification and depth of focus. 3D reconstruction based on scanning electron microscope (SEM) images and stereo-pair technique is foreseen as a possible method for quantification...

  1. bajo el bosque en Costa Rica. 1980-2000

    Directory of Open Access Journals (Sweden)

    Rafael Ocampo

    2007-01-01

    Full Text Available La ipecacuana o raicilla, hierba nativa de América, es la única planta medicinal del trópico húmedo de Costa Rica cultivada bajo el bosque. Es cultivada en la región Huetar Norte, limítrofe con Nicaragua; la raíz seca de ipecacuana se ha comercializado en Costa Rica como materia prima para la industria farmacéutica internacional desde principios del siglo XX. De acuerdo con las estadísticas oficiales, las exportaciones de raicilla desde Costa Rica en los últimos 20 años han significado un promedio de 64 t año-1. Este trabajo resume actividades relacionadas con la descripción y cultivo de la planta, así como algunos de los aspectos agroecológicos de su cultivo.

  2. Factores de riesgo en el bajo peso al nacer

    Directory of Open Access Journals (Sweden)

    Guillermo Díaz Alonso

    1995-06-01

    Full Text Available Se realizó un estudio retrospectivo de tipo caso control en el área del Policlínico Docente "Luis A. Turcios Lima" del municipio 10 de Octubre durante el período de 1990 a 1993, con el objetivo de identificar el comportamiento del bajo peso al nacer, establecer la existencia y la intensidad de esta entidad con los factores de riesgo seleccionados, e identificar el grado de influencia individual de dichos factores. La muestra quedó conformada por 92 recién nacidos de bajo peso y 468 con normopeso. Las variables estudiadas fueron la edad materna, la valoración ponderal, las complicaciones obstétricas, las enfermedades asociadas con la gestación, el hábito de fumar y el período intergenésico. Se aplicó el test chi-cuadrado, el odds- -ratio y el de riesgo atribuible en los nacimientos expuestos y en la población total. Todas las variables estuvieron asociadas significativamente con el bajo peso al nacer, y fueron identificadas como factores de riesgo con influencia marcada: la edad materna de 35 años o más, la amenaza de parto prematuro, la rotura prematura de membranas, la toxemia y la diabetes mellitus; con efecto moderado, el bajo peso materno, un período intergenésico menor de 1 año, la hipertensión arterial, el asma bronquial, el hábito de fumar, la sepsis urinaria, y con influencia ligera, la edad materna inferior a los 20 años.A case-control retrospective study was carried out at "Luis A. Turcios Lima" Teaching Polyclinics form 10 de Octubre municipality during the period of 1990-1993, with the aim of identifying the behaviour of low birth weight, establishing the occurrence and intensity of this entity with selected risk factors, and identifying the degree of individual influence of such factors. The sample consisted of 92 low birth weight infants and 468 with normal weight. Variables studied were: maternal age, weight appraisal, and obstetric complications, diseases associated with pregnancy, smoking habit, and the

  3. Uranium mill tailings stabilization

    International Nuclear Information System (INIS)

    Hartley, J.N.; Koehmstedt, P.L.; Esterl, D.J.; Freeman, H.D.

    1980-02-01

    Uranium mill tailings pose a potential radiation health hazard to the public. Therefore, stabilization or disposal of these tailings in a safe and environmentally sound way is needed to minimize radon exhalation and other environmental hazards. One of the most promising concepts for stabilizing U tailings is the use of asphalt emulsion to contain radon and other hazardous materials within uranium tailings. This approach is being investigated at the Pacific Northwest Laboratory. Results of these studies indicate that a radon flux reduction of greater than 99% can be obtained using either a poured-on/sprayed-on seal (3.0 to 7.0 mm thick) or an admixture seal (2.5 to 12.7 cm thick) containing about 18 wt % residual asphalt. A field test was carried out in June 1979 at the Grand Junction tailings pile in order to demonstrate the sealing process. A reduction in radon flux ranging from 4.5 to greater than 99% (76% average) was achieved using a 15.2-cm (6-in.) admix seal with a sprayed-on top coat. A hydrostatic stabilizer was used to apply the admix. Following compaction, a spray coat seal was applied over the admix as the final step in construction of a radon seal. Overburden was applied to provide a protective soil layer over the seal. Included in part of the overburden was a herbicide to prevent root penetration

  4. Evaluación del secuestro de carbono con diferentes alternativas de gestión selvícola en monte bajo de castaño en el Norte de España

    OpenAIRE

    Prada Monteagudo, Marta

    2014-01-01

    Las masas forestales y las actividades de manejo forestal juegan un papel importante en la fijación del carbono. Los objetivos del estudio fueron determinar la línea base de almacenamiento de carbono en monte bajo de castaño (Castanea sativa Mill.), evaluar el efecto de la gestión forestal y validar los resultados del modelo. El área de estudio se localiza en el norte de España. El modelo CO2FIX se utilizó para estimar el contenido de carbono en la biomasa, suelo y productos, evaluándose 5 al...

  5. Factores de riesgo de bajo peso al nacer

    Directory of Open Access Journals (Sweden)

    Marcelo Bortman

    1998-05-01

    Full Text Available El bajo peso al nacer (BPN es el principal factor determinante conocido de la mortalidad infantil. Pese a la notable reducción de las tasas de mortalidad infantil y al aumento de las tasas de supervivencia de niños con BPN, en Neuquén, Argentina, no se han observado descensos notables de las tasas de BPN. El propósito de este estudio fue conocer los factores de riesgo de BPN, su frecuencia en la población y el papel de la atención prenatal en su prevención, y desarrollar una escala de riesgo que permita identificar a las mujeres en mayor riesgo de dar a luz un niño de bajo peso. Con tal propósito se realizó un estudio transversal en el cual se utilizó 50% de los datos del Sistema Informático Perinatal correspondientes al período 1988­1995 y procedentes de los 29 hospitales de la provincia de Neuquén (46 171 nacimientos. Se analizaron la distribución del peso y la frecuencia de los posibles factores de riesgo de BPN. La asociación entre estos factores y el BPN se analizó mediante un modelo de regresión logística. Con los resultados obtenidos se desarrolló una escala aditiva, que fue validada con el 50% restante de los registros de nacimientos. La razón de posibilidades (RP más elevada correspondió a la falta de atención prenatal (RP = 8,78; IC95%: 6,7 a 11,4. Las RP asociadas con una atención prenatal inadecuada, una primera consulta prenatal tardía, preeclampsia o eclampsia, hemorragia o anomalías de la placenta o sus membranas e historia de un hijo previo con BPN fueron mayores de 2,0. El riesgo de tener hijos con BPN también fue más alto en las mujeres mayores de 40 años, las menores de 20, las solteras, las fumadoras, aquellas cuyo intervalo intergenésico fue menor de 18 meses y las que tenían un índice de masa corporal menor de 20. Por último, se encontró una relación lineal directa entre el puntaje en la escala y el riesgo de tener un hijo con BPN.

  6. Einstein-Yang-Mills from pure Yang-Mills amplitudes

    Energy Technology Data Exchange (ETDEWEB)

    Nandan, Dhritiman; Plefka, Jan [Institut für Physik and IRIS Adlershof, Humboldt-Universität zu Berlin,Zum Großen Windkanal 6, D-12489 Berlin (Germany); Schlotterer, Oliver [Max-Planck-Institut für Gravitationsphysik, Albert-Einstein-Institut,Am Mühlenberg 1, D-14476 Potsdam (Germany); Wen, Congkao [I.N.F.N. Sezione di Roma Tor Vergata,Via della Ricerca Scientifica, 00133 Roma (Italy)

    2016-10-14

    We present new relations for scattering amplitudes of color ordered gluons and gravitons in Einstein-Yang-Mills theory. Tree-level amplitudes of arbitrary multiplicities and polarizations involving up to three gravitons and up to two color traces are reduced to partial amplitudes of pure Yang-Mills theory. In fact, the double-trace identities apply to Einstein-Yang-Mills extended by a dilaton and a B-field. Our results generalize recent work of Stieberger and Taylor for the single graviton case with a single color trace. As the derivation is made in the dimension-agnostic Cachazo-He-Yuan formalism, our results are valid for external bosons in any number of spacetime dimensions. Moreover, they generalize to the superamplitudes in theories with 16 supercharges.

  7. ¿Aerolíneas de bajo costo en colombia?

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Mantilla

    2003-11-01

    Full Text Available Con la apertura del mercado en Colombia, la competencia entre aerolíneas se agudizó ante la entrada de nuevos operadores y la flexibilización de tarifas como estrategia para la captación de una mayor demanda. Las ventajas competitivas de cada aerolínea fueron el punto clave para la disputa del mercado y todas ellas trabajan hoy en fórmulas que les permitan maximizar beneficios y minimizar costos, enfrentando así la crisis que vive la industria, debido a los acontecimientos del 11 de septiembre de 2001. Puede decirse que los grandes esfuerzos se hacen en los departamentos comerciales, pues debido al auge de las tecnologías y al uso del internet, tanto empresas de transporte aéreo como agentes turísticos deben enfrentar el problema de la competencia de precios. Sin embargo, esto les ofrece a las aerolíneas la oportunidad de comercializar sus servicios a "bajo costo", esquema que ha resultado favorable para empresas y clientes.

  8. Factores de riesgo del bajo peso al nacer

    Directory of Open Access Journals (Sweden)

    Ernesto Rosell Juarte

    1996-06-01

    Full Text Available Se realizó una investigación de casos y controles en las mujeres que parieron niños con bajo peso, de los consultorios urbanos de médicos de la familia pertenecientes al Policlínico Comunitario Docente "Carlos J. Finlay" de Camagüey, durante el año 1994, con el objetivo de identificar los factores de riesgo biológico y socioeconómicos que con más frecuencia se asociaron; se estudiaron 32 "casos" y 53 "controles" de un universo de 521 nacidos vivos. Se demostró que la edad materna hasta 19 años y de 35 y más, la ganancia insuficiente de peso durante la gestación, el antecedente familiar de prematuridad, la amenaza de parto pretérmino y la ruptura prematura de las membranas, resultaron ser factores de riesgo, y esto no coincide con lo reportado por algunos autores en la evaluación de otros factores asociados.

  9. Current uranium mill licensing issues

    International Nuclear Information System (INIS)

    Scarano, R.A.

    1977-01-01

    The problems encountered to insure environmentally safe mining and milling of uranium ores are reviewed. Emphasis is placed on the management of tailings resulting from milling operations. It is pointed out that although the concentration of radioactivity in the tailings is relatively low, control measures are necessary because of the large quantities involved and because of the long half-life of the parent radionuclides present. The major concerns with mill tailings are radon release to the atmosphere and isolation of the tailings from the human environment. Since it is anticipated that the amount of tailings created by the year 2000 will be more than an order of magnitude greater than the quantities that have been generated during the past 30 years, it is recommended that all mill tailings storage areas be located remote from public contact and in areas such that disruption and dispersion by natural forces and seepage of toxic materials into ground water systems are reduced to the maximum extent achievable. Technical issues that receive attention during the NRC licensing process for uranium mills and the preparation of environmental impact statements are discussed briefly

  10. Colorado's prospectus on uranium milling

    International Nuclear Information System (INIS)

    Hazle, A.J.; Franz, G.A.; Gamewell, R.

    1982-01-01

    The first part of this paper will discuss Colorado's control of uranium mill tailings under Titles I and II of the Uranium Mill Tailings Radiation Control Act of 1978. Colorado has a legacy of nine inactive mill sites requiring reclamation under Title I, and two presently active plus a number of new mill proposals which must be regulated in accordance with Title II. Past failures in siting and control on the part of federal jurisdictions have left the state with a heavy legacy requiring extensive effort to address impacts to the state's environment and population. The second part of this paper will discuss the remedial action programme authorized under Public Law 92-314 for Mesa Country, where lack of federal control led to the dispersal of several hundred thousand tons of uranium mill tailings on thousands of properties, including hundreds of homes, schools and other structures. Successful completion of the State efforts under both programmes will depend on a high level of funding and on the maintenance of adequate regulatory standards. (author)

  11. The yang mills gravity dual

    International Nuclear Information System (INIS)

    Crooks, David E.; Evans, Nick

    2003-01-01

    We describe a ten dimensional supergravity geometry which is dual to a gauge theory that is non-supersymmetric Yang Mills in the infra-red but reverts to N=4 super Yang Mills in the ultra-violet. A brane probe of the geometry shows that the scalar potential of the gauge theory is stable. We discuss the infra-red behaviour of the solution. The geometry describes a Schroedinger equation potential that determines the glueball spectrum of the theory; there is a mass gap and a discrete spectrum. The glueball mass predictions match previous AdS/CFT Correspondence computations in the non-supersymmetric Yang Mills theory, and lattice data, at the 10% level. (author)

  12. Galilean Yang-Mills theory

    International Nuclear Information System (INIS)

    Bagchi, Arjun; Basu, Rudranil; Kakkar, Ashish; Mehra, Aditya

    2016-01-01

    We investigate the symmetry structure of the non-relativistic limit of Yang-Mills theories. Generalising previous results in the Galilean limit of electrodynamics, we discover that for Yang-Mills theories there are a variety of limits inside the Galilean regime. We first explicitly work with the SU(2) theory and then generalise to SU(N) for all N, systematising our notation and analysis. We discover that the whole family of limits lead to different sectors of Galilean Yang-Mills theories and the equations of motion in each sector exhibit hitherto undiscovered infinite dimensional symmetries, viz. infinite Galilean Conformal symmetries in D=4. These provide the first examples of interacting Galilean Conformal Field Theories (GCFTs) in D>2.

  13. Galilean Yang-Mills theory

    Energy Technology Data Exchange (ETDEWEB)

    Bagchi, Arjun [Center for Theoretical Physics, Massachusetts Institute of Technology,77 Massachusetts Avenue, Cambridge, MA 02139 (United States); Basu, Rudranil [Saha Institute of Nuclear Physics,Block AF, Sector 1, Bidhannagar, Kolkata 700068 (India); Kakkar, Ashish [Indian Institute of Science Education and Research,Dr Homi Bhabha Road, Pashan. Pune 411008 (India); Mehra, Aditya [Indian Institute of Science Education and Research,Dr Homi Bhabha Road, Pashan. Pune 411008 (India); Van Swinderen Institute for Particle Physics and Gravity, University of Groningen, Nijenborgh 4, 9747 AG Groningen (Netherlands)

    2016-04-11

    We investigate the symmetry structure of the non-relativistic limit of Yang-Mills theories. Generalising previous results in the Galilean limit of electrodynamics, we discover that for Yang-Mills theories there are a variety of limits inside the Galilean regime. We first explicitly work with the SU(2) theory and then generalise to SU(N) for all N, systematising our notation and analysis. We discover that the whole family of limits lead to different sectors of Galilean Yang-Mills theories and the equations of motion in each sector exhibit hitherto undiscovered infinite dimensional symmetries, viz. infinite Galilean Conformal symmetries in D=4. These provide the first examples of interacting Galilean Conformal Field Theories (GCFTs) in D>2.

  14. Uranium mill tailings and radon

    International Nuclear Information System (INIS)

    Hanchey, L.A.

    1981-01-01

    The major health hazard from uranium mill tailings is presumed to be respiratory cancer resulting from the inhalation of radon daughter products. A review of studies on inhalation of radon and its daughters indicates that the hazard from the tailings is extremely small. If the assumptions used in the studies are correct, one or two people per year in the US may develop cancer as a result of radon exhaled from all the Uranium Mill Tailings Remedial Action Program sites. The remedial action should reduce the hazard from the tailings by a factor of about 100

  15. Soil Carbon 4 per mille

    Science.gov (United States)

    Minasny, Budiman; van Wesemael, Bas

    2017-04-01

    The '4 per mille Soils for Food Security and Climate' was launched at the COP21 aiming to increase global soil organic matter stocks by 4 per mille (or 0.4 %) per year as a compensation for the global emissions of greenhouse gases by anthropogenic sources. This paper surveyed the soil organic carbon (SOC) stock estimates and sequestration potentials from 20 regions in the world (New Zealand, Chile, South Africa, Australia, Tanzania, Indonesia, Kenya, Nigeria, India, China Taiwan, South Korea, China Mainland, United States of America, France, Canada, Belgium, England & Wales, Ireland, Scotland, and Russia) and asked whether the 4 per mille initiative is feasible. This study highlights region specific efforts and scopes for soil carbon sequestration. Reported soil C sequestration rates generally show that under best management practices, 4 per mille or even higher sequestration rates can be accomplished. High C sequestration rates (up to 10 per mille) can be achieved for soils with low initial SOC stock (topsoil less than 30 t C ha-1), and at the first twenty years after implementation of best management practices. In addition, areas that have reached equilibrium but not at their saturation level will not be able to further increase their sequestration. We found that most studies on SOC sequestration globally only consider topsoil (up to 0.3 m depth), as it is considered to be most affected by management techniques. The 4 per mille initiative was based on a blanket calculation of the whole global soil profile C stock, however the potential to increase SOC is mostly on managed agricultural lands. If we consider 4 per mille on global topsoil of agricultural land, SOC sequestration is about 3.6 Gt C per year, which effectively offset 40% of global anthropogenic greenhouse gas emissions. As a strategy for climate change mitigation, soil carbon sequestration buys time over the next ten to twenty years while other effective sequestration and low carbon technologies become

  16. Uranium mill tailings and radon

    Energy Technology Data Exchange (ETDEWEB)

    Hanchey, L A

    1981-04-01

    The major health hazard from uranium mill tailings is presumed to be respiratory cancer resulting from the inhalation of radon daughter products. A review of studies on inhalation of radon and its daughters indicates that the hazard from the tailings is extremely small. If the assumptions used in the studies are correct, one or two people per year in the United States may develop cancer as a result of radon exhaled from all the Uranium Mill Tailings Remedial Action program sites. The remedial action should reduce the hazard from the tailings by a factor of about 100.

  17. Uranium mill tailings and radon

    Energy Technology Data Exchange (ETDEWEB)

    Hanchey, L A

    1981-01-01

    The major health hazard from uranium mill tailings is presumed to be respiratory cancer resulting from the inhalation of radon daughter products. A review of studies on inhalation of radon and its daughters indicates that the hazard from the tailings is extremely small. If the assumptions used in the studies are correct, one or two people per year in the US may develop cancer as a result of radon exhaled from all the Uranium Mill Tailings Remedial Action Program sites. The remedial action should reduce the hazard from the tailings by a factor of about 100.

  18. Ley marco de aseguramiento universal en salud, bajo la lupa

    Directory of Open Access Journals (Sweden)

    Leoncio Díaz

    2009-04-01

    Full Text Available La Ley Marco de Aseguramiento Universal en Salud, concebida en el marco del modelo neoliberal conservador, excluyente y polarizante, fue aprobada en circunstancias en la que persisten grandes contrastes entre sistemas de salud. Por un lado, los países que mantienen subsistemas inconexos y privatizados y, por otro, los que unificados y bajo la responsabilidad del Estado, garantizan a todos el acceso integral, gratuito y de calidad a los servicios de salud. En América y el Caribe, existen países cuyos pobladores carecen de derechos y posibilidades, evidenciando las profundas inequidades que mantienen en exclusión a la mayoría pobre y de extrema pobreza, entre ellos, el Perú muestra indicadores de salud que aún se mantienen en cifras alarmantes y por debajo de los que presentan otras realidades en el mundo. En las últimas tres décadas hubo ensayos frustros de reformas, como la integración funcional del Ministerio de Salud con el Instituto Peruano de Seguridad Social, o el Sistema Nacional Coordinado y Descentralizado en Salud. Actualmente se formula la Ley Marco de Aseguramiento Universal, que mantiene los actuales subsistemas sin variación alguna y con sus propias autonomías, ensayando pilotos, estableciendo planes parciales, implementándola de manera progresiva, priorizando la privatización y debilitando la función rectora del Ministerio de Salud, al crear una superintendencia omnipotente, lo cual continuará permitiendo la exclusión social de más de 9 millones de peruanos. Existe, por tanto, la necesidad de plantear la unificación de los subsistemas, para construir un Sistema Único de Salud, capaz de otorgar salud plena, integral, de calidad y sin costo alguno al 100% de ciudadanos.

  19. Capital intelectual bajo el modelo de e-commerce

    Directory of Open Access Journals (Sweden)

    Gladys Rodríguez

    2009-09-01

    Full Text Available Hoy el mundo está cambiando de una economía basada en el acero, automóviles y carreteras hacia una nueva economía construida con base en silicio, computadoras y redes. Esta revolución tecnológica no se limita a modificar los equipos, los productos, las trayectorias tecnológicas y el modelo organizativo. Sino, como en todo cambio de paradigma hay un proceso de desmantelamiento de lo establecido y la construcción de un nuevo conjunto de principios. Hoy ese nuevo paradigma se fundamenta en el conocimiento, la pericia y sobre todo el talento del hombre. Por tanto, el objetivo principal es describir la importancia que tiene el capital intelectual en las organizaciones de e-commerce. La metodología empleada consistió en una revisión teórica con base a la literatura especializada de autores tales como: Edvinsson y Malone (1998, Brooking (1997, Luz Clara (2001, Merino (2004 y Añez (2005: orientándose hacia el capital intelectual bajo el esquema de negocios de organizaciones de e-commerce. Entre los resultados se destacan dos propuestas: una que describe el proceso de transformación de un negocio tradicional a un negocio de e-commerce sobre la base del capital intelectual; la otra, referida a indicar estrategias gerenciales que apuntan a identificar y evaluar la relación del capital intelectual en cuanto a las innovaciones/ respuestas a los cambios exigidos por el proceso de globalización en el marco de organizaciones de e-commerce.

  20. EPA's role in uranium mining and milling

    International Nuclear Information System (INIS)

    Smith, P.B.

    1980-01-01

    EPA's role and actions in regulating uranium mining and milling are reviewed and updated. Special emphasis is given to EPA's current activities under the Uranium Mill Tailings Radiation Control Act of 1978

  1. 75 FR 71463 - Woodland Mills Corporation Mill Spring, NC; Notice of Revised Determination on Reconsideration

    Science.gov (United States)

    2010-11-23

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,695] Woodland Mills Corporation Mill Spring, NC; Notice of Revised Determination on Reconsideration By application dated July 22... regarding the eligibility of workers and former workers of Woodland Mills Corporation, Mill Spring, North...

  2. Would John Stuart Mill have regulated pornography?

    OpenAIRE

    McGlynn, C.; Ward, I.

    2014-01-01

    John Stuart Mill dominates contemporary pornography debates where he is routinely invoked as an authoritative defence against regulation. This article, by contrast, argues that a broader understanding of Mill's ethical liberalism, his utilitarianism, and his feminism casts doubt over such an assumption. New insights into Mill's approach to sex, sexual activity, and the regulation of prostitution reveal an altogether more nuanced and activist approach. We conclude that John Stuart Mill would a...

  3. 77 FR 14837 - Bioassay at Uranium Mills

    Science.gov (United States)

    2012-03-13

    ... NUCLEAR REGULATORY COMMISSION [NRC-2012-0057] Bioassay at Uranium Mills AGENCY: Nuclear Regulatory..., ``Bioassay at Uranium Mills.'' This guide describes a bioassay program acceptable to the NRC staff for uranium mills and applicable portions of uranium conversion facilities where the possibility of exposure...

  4. Chevron's Panna Maria mill process description

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Key features of Chevron's Uranium Mill located near Panna Maria, Texas, are described. The mill is designed to process a nominal 2500 dry tons/day of uranium bearing ore containing 15% uncombined moisture. The following operations at the mill are highlighted: ore receiving, grinding, leaching, countercurrent decantation and tailings disposal, filtering, solvent extraction, solvent stripping, precipitation, drying, and packaging

  5. Ground beetle populations near a kraft mill

    Energy Technology Data Exchange (ETDEWEB)

    Freitag, R.; Hastings, L.; Mercer, W.R.; Smith, A.

    1973-02-01

    Twenty species of ground beetles (Family Carabidae) and one species of carrion beetle (Family Silphidae) were collected in six stations east of a kraft paper mill in Thunder Bay, Ontario, from May to August, 1971. The beetle population decreased markedly towards the mill. There was no apparent statistical difference in size variation of specimens near the mill and those further away.

  6. The automatic lumber planing mill

    Science.gov (United States)

    Peter Koch

    1957-01-01

    It is probable that a truly automatic planning operation could be devised if some of the variables commonly present in the mill-run lumber were eliminated and the remaining variables kept under close control. This paper will deal with the more general situation faced by mostl umber manufacturing plants. In other words, it will be assumed that the incoming lumber has...

  7. Soil carbon 4 per mille

    NARCIS (Netherlands)

    Mulder, V.L.

    2017-01-01

    The ‘4 per mille Soils for Food Security and Climate’ was launched at the COP21 with an aspiration to increase global soil organic matter stocks by 4 per 1000 (or 0.4 %) per year as a compensation for the global emissions of greenhouse gases by anthropogenic sources. This paper surveyed the soil

  8. Massive Yang-Mills fields

    NARCIS (Netherlands)

    Veltman, M.J.G.; Reiff, J.

    1969-01-01

    Two problems are studied in the paper: (i) the relation between Lagrangian and Feynman rules if the Lagrangian contains derivative couplings and/or vector meson fields and (ii) the behaviour of certain two closed loop diagrams in the perturbation theory of Yang-Mills fields. With respect to ( i ) .

  9. Integration of micro milling highspeed spindle on a microEDM-milling machine set-up

    DEFF Research Database (Denmark)

    De Grave, Arnaud; Hansen, Hans Nørgaard; Andolfatto, Loic

    2009-01-01

    In order to cope with repositioning errors and to combine the fast removal rate of micro milling with the precision and small feature size achievable with micro EDM milling, a hybrid micro-milling and micro-EDM milling centre was built and tested. The aim was to build an affordable set-up, easy...... by micro milling. Examples of test parts are shown and used as an experimental validation....

  10. Yang-Mills gravity in biconformal space

    International Nuclear Information System (INIS)

    Anderson, Lara B; Wheeler, James T

    2007-01-01

    We write a gravity theory with Yang-Mills-type action using the biconformal gauging of the conformal group. We show that the resulting biconformal Yang-Mills gravity theories describe 4-dim, scale-invariant general relativity in the case of slowly changing fields. In addition, we systematically extend arbitrary 4-dim Yang-Mills theories to biconformal space, providing a new arena for studying flat-space Yang-Mills theories. By applying the biconformal extension to a 4-dim pure Yang-Mills theory with conformal symmetry, we establish a 1-1, onto mapping between a set of gravitational gauge theories and 4-dim, flat-space gauge theories

  11. Influence of milling process on efavirenz solubility

    Directory of Open Access Journals (Sweden)

    Erizal Zaini

    2017-01-01

    Full Text Available Introduction: The aim of this study was to investigate the influence of the milling process on the solubility of efavirenz. Materials and Methods: Milling process was done using Nanomilling for 30, 60, and 180 min. Intact and milled efavirenz were characterized by powder X-ray diffraction, scanning electron microscopy (SEM, spectroscopy infrared (IR, differential scanning calorimetry (DSC, and solubility test. Results: The X-ray diffractogram showed a decline on peak intensity of milled efavirenz compared to intact efavirenz. The SEM graph depicted the change from crystalline to amorphous habit after milling process. The IR spectrum showed there was no difference between intact and milled efavirenz. Thermal analysis which performed by DSC showed a reduction on endothermic peak after milling process which related to decreasing of crystallinity. Solubility test of intact and milled efavirenz was conducted in distilled water free CO2with 0.25% sodium lauryl sulfate media and measured using high-performance liquid chromatography method with acetonitrile: distilled water (80:20 as mobile phases. The solubility was significantly increased (P < 0.05 after milling processes, which the intact efavirenz was 27.12 ± 2.05, while the milled efavirenz for 30, 60, and 180 min were 75.53 ± 1.59, 82.34 ± 1.23, and 104.75 ± 0.96 μg/mL, respectively. Conclusions: Based on the results, the solubility of efavirenz improved after milling process.

  12. PULPA CUBA MILL ENERGY ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Juan Pedro Hernández Touset

    2015-10-01

    Full Text Available An energy study was performed at Pulpa Cuba Paper Mill, located in Sancti Spiritus, where an energy management system was applied according to NC: ISO 50001, in order to assess the energy system by applying energy management systems for energy and water reduction in the paper mill, in which the current steam generation, distribution and consumption system is diagnosed. The proposal of a modified energy scheme with 1 MW Backpressure Steam Turbine Generator and rehabilitation of the original boiler or installing a lower capacity boiler contributes to save financial resources by the concept of water, fuel and electricity. The implementation of four projects will save 3,095,574 CUC / y and an average payback period of about 1 year is expected.

  13. Mill Glaze: Myth or Reality?

    Science.gov (United States)

    Mark Knaebe

    2013-01-01

    Since the mid-1980s, a condition called “mill glaze” (also called planer’s glaze) has sometimes been blamed for the failure of a coating on smooth flat-grained siding and some other wood products. The exact cause of this problem has been a subject of controversy. Many people believe that the coating fails as a result of the planing and/or drying processes. They...

  14. El crecimiento y desarrollo ante la prematuridad y el bajo peso al nacer

    Directory of Open Access Journals (Sweden)

    Christine Baccarat de Godoy Martins

    2015-09-01

    Full Text Available Objetivo: Realizar una revisión bibliográfica sobre el crecimiento y desarrollo de prematuros y/o de bajo peso al nacer. Metodología: Se utilizaron las bases de datos lilacs, medline y scielo. Se encontraron 64 trabajos: 10 publicados en 2005, 10 en 2006, 12 en 2007, 16 en 2008, 8 en 2009 y 8 en 2010. Las publicaciones halladas pertenecían a las áreas de medicina (59,4%, nutrición (7,8%, enfermería (7,8%, salud pública (7,8%, psicología (6,2%, epidemiología (4,7%, fisiología (3,1% y fonoaudiología (3,1%. Resultados:Los textos encontrados permitieron la organización del conocimiento producido según las siguientes categorías de análisis: Factores asociados al bajo peso en el nacimiento/prematuridad; Repercusiones del bajo peso en el nacimiento/prematuridad para el crecimiento y desarrollo y medidas de prevención; y Supervivencia de los recién nacidos prematuros o de bajo peso. Conclusión: Los niños nacidos prematuramente y de bajo peso generalmente presentan déficit de desarrollo. Un acompañamiento postnatal centrado en el crecimiento y desarrollo es fundamental.

  15. Social Change of Bajo Tribe Society in Karimunjawa: From "Sea Tribe" to "Land Tribe"

    Directory of Open Access Journals (Sweden)

    Titiek Suliyati

    2017-12-01

    The result of the research shows that there is a social change in Bajo society living permanently in Karimunjawa that is, the change of daily behavior in the society, social interaction with other tribes, values held by the society and social institution, structure and social classes. Social change occurring to Bajo society in Karimunjawa brings positive influences. The social changes among others are awareness towards the importance of education, Bajo society has new jobs other than fisherman, the increase of income, living standard, also modernization in fisheries system. The negative impact as a consequence of the social changes is faded culture, changes in life orientation and views of life, and consumerism in the society.

  16. Mechanical alloying and reactive milling in a high energy planetary mill

    International Nuclear Information System (INIS)

    Jiang Xianjin; Trunov, Mikhaylo A.; Schoenitz, Mirko; Dave, Rajesh N.; Dreizin, Edward L.

    2009-01-01

    Powder refinement in a planetary mill (Retsch PM 400-MA) is investigated experimentally and analyzed using discrete element modeling (DEM). Refinement is defined as the average size of the individual components in a composite powder. The specific milling dose, defined as the product of charge ratio and milling time, is used as an experimental parameter tracking the progress of the material refinement. This parameter is determined experimentally for milling of boron and titanium powders, for which the time of initiation of a self-sustained reaction is measured under different milling conditions. It is assumed that the reaction becomes self-sustaining when the same powder refinement is achieved. The DEM calculations established that the milling balls primarily roll along the milling container's perimeter. The inverse of the rate of energy dissipation resulting from this rolling motion is used as the DEM analog of the specific milling dose. The results correlate well with experimental observations.

  17. 75 FR 49524 - Woodland Mills Corporation, Mill Spring, NC; Notice of Affirmative Determination Regarding...

    Science.gov (United States)

    2010-08-13

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,695] Woodland Mills Corporation, Mill Spring, NC; Notice of Affirmative Determination Regarding Application for Reconsideration By application dated July 22, 2010, petitioners requested administrative [[Page 49525

  18. Geometrical characterization of micro end milling tools

    DEFF Research Database (Denmark)

    Borsetto, Francesca; Bariani, Paolo; Bissacco, Giuliano

    2005-01-01

    Performance of the milling process is directly affected by the accuracy of tool geometry. Development of methods suitable for dimensional characterization of such tools, with low measurement uncertainties is therefore of relevance. The present article focuses on the geometrical characterization...... of a flat micro end milling tool with a nominal mill diameter of 200 microns. An experimental investigation was carried out involving two different non-contact systems...

  19. Condiciones de trabajo materno y bajo peso al nacer en la Ciudad de México

    Directory of Open Access Journals (Sweden)

    CERÓN-MIRELES PRUDENCIA

    1997-01-01

    Full Text Available Objetivo. Estudiar la asociación entre condiciones de trabajo materno y bajo peso al nacer en la Ciudad de México. Material y métodos. Se encuestaron 2 623 trabajadoras que atendieron sus partos en tres grandes hospitales de la Ciudad de México en 1992. Se obtuvo información sobre los principales factores biológicos y sociales que se asocian al bajo peso al nacer; asimismo, se determinó el estrés ocupacional utilizando el instrumento desarrollado por Karasek. Se utilizaron modelos de regresión logística para evaluar la relación de las condiciones de trabajo con el bajo peso al nacer, controlando por variables confusoras. Resultados. El bajo peso al nacer fue más alto en trabajadoras con jornadas mayores a 50 horas semanales (RM= 1.6; IC= 1.17, 2.28 y con conflictos laborales (RM= 1.5; IC= 1.0, 2.25. La falta de apoyo social tangible fue identificado como un factor de riesgo de bajo peso al nacer (RM= 1.7; IC= 1.20, 2.33. Las medidas preventivas laborales como el cambio de tareas, disminución de la jornada y las salidas por enfermedad no mostraron un efecto benéfico en el peso al nacer, a excepción de la licencia de maternidad; las madres que no la tuvieron mostraron una probabilidad 2.2 veces mayor para bajo peso al nacer (IC= 1.66, 2.93. Conclusiones. Estos hallazgos resaltan la importancia de identificar los factores de riesgo ocupacional en el embarazo..

  20. Black holes with Yang-Mills hair

    International Nuclear Information System (INIS)

    Kleihaus, B.; Kunz, J.; Sood, A.; Wirschins, M.

    1998-01-01

    In Einstein-Maxwell theory black holes are uniquely determined by their mass, their charge and their angular momentum. This is no longer true in Einstein-Yang-Mills theory. We discuss sequences of neutral and charged SU(N) Einstein-Yang-Mills black holes, which are static spherically symmetric and asymptotically flat, and which carry Yang-Mills hair. Furthermore, in Einstein-Maxwell theory static black holes are spherically symmetric. We demonstrate that, in contrast, SU(2) Einstein-Yang-Mills theory possesses a sequence of black holes, which are static and only axially symmetric

  1. Focused ion beam milling of carbon fibres

    International Nuclear Information System (INIS)

    Huson, Mickey G.; Church, Jeffrey S.; Hillbrick, Linda K.; Woodhead, Andrea L.; Sridhar, Manoj; Van De Meene, Allison M.L.

    2015-01-01

    A focused ion beam has been used to mill both individual carbon fibres as well as fibres in an epoxy composite, with a view to preparing flat surfaces for nano-indentation. The milled surfaces have been assessed for damage using scanning probe microscopy nano-indentation and Raman micro-probe analysis, revealing that FIB milling damages the carbon fibre surface and covers surrounding areas with debris of disordered carbon. The debris is detected as far as 100 μm from the milling site. The energy of milling as well as the orientation of the beam was varied and shown to have an effect when assessed by Raman spectroscopy. - Highlights: • Focused ion beam (FIB) milling was used to mill flat surfaces on carbon fibres. • Raman spectroscopy showed amorphous carbon was generated during FIB milling. • The amorphous debris is detected as far as 100 μm from the milling site. • This surface degradation was confirmed by nano-indentation experiments.

  2. Particle deformation during stirred media milling

    Science.gov (United States)

    Hamey, Rhye Garrett

    Production of high aspect ratio metal flakes is an important part of the paint and coating industry. The United States Army also uses high aspect ratio metal flakes of a specific dimension in obscurant clouds to attenuate infrared radiation. The most common method for their production is by milling a metal powder. Ductile metal particles are initially flattened in the process increasing the aspect ratio. As the process continues, coldwelding of metal flakes can take place increasing the particle size and decreasing the aspect ratio. Extended milling times may also result in fracture leading to a further decrease in the particle size and aspect ratio. Both the coldwelding of the particles and the breakage of the particles are ultimately detrimental to the materials performance. This study utilized characterization techniques, such as, light scattering and image analysis to determine the change in particle size as a function of milling time and parameters. This study proved that a fundamental relationship between the milling parameters and particle deformation could be established by using Hertz's theory to calculate the stress acting on the aluminum particles. The study also demonstrated a method by which milling efficiency could be calculated, based on the amount of energy required to cause particle deformation. The study found that the particle deformation process could be an energy efficient process at short milling times with milling efficiency as high as 80%. Finally, statistical design of experiment was used to obtain a model that related particle deformation to milling parameters, such as, rotation rate and milling media size.

  3. Serie Madera para construcción La madera certificada bajo el concepto del triple resultado

    OpenAIRE

    Camacho-Cornejo, Diego; Moya-Roque, Róger

    2012-01-01

    A nivel mundial existe una tendencia de utilización de los productos certificados de madera bajo el concepto de triple resultado. En Costa Rica, diferentes empresas trabajan bajo este concepto. Es por ello que el presente trabajo tiene como objetivo mostrar el desarrollo de la madera certificada en Costa Rica, estableciendo la importancia de utilizar este tipo de madera, las ventajas de utilizarla en relación a aquella que no presenta esta certificación. Así mismo se presenta un detalle de la...

  4. LA INSATISFACCIÓN LABORAL COMO FACTOR DEL BAJO RENDIMIENTO DEL TRABAJADOR

    OpenAIRE

    Granda Carazas, Segundo Eloy

    2014-01-01

    El tema "la insatisfacción laboral como factor del bajo rendimiento del trabajador" es importante, ya que se puede constatar que en algunas organizaciones, pese a sus significativos esfuerzos para ampliar y modernizar su infraestructura, afrontan problemas de rendimiento laboral. Este artículo se orienta a determinar en qué medida la insatisfacción laboral se asocia al bajo rendimiento laboral en una organización. Como factores constituyentes de la insatisfacción laboral se considerar...

  5. KSC ADVANCED GROUND BASED FIELD MILL V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Ground Based Field Mill (AGBFM) network consists of 34 (31 operational) field mills located at Kennedy Space Center (KSC), Florida. The field mills...

  6. Radiological health aspects of uranium milling

    International Nuclear Information System (INIS)

    Fisher, D.R.; Stoetzel, G.A.

    1983-05-01

    This report describes the operation of conventional and unconventional uranium milling processes, the potential for occupational exposure to ionizing radiation at the mill, methods for radiological safety, methods of evaluating occupational radiation exposures, and current government regulations for protecting workers and ensuring that standards for radiation protection are adhered to. In addition, a survey of current radiological health practices is summarized

  7. Airborne effluent control at uranium mills

    International Nuclear Information System (INIS)

    Sears, M.B.

    1976-01-01

    The Oak Ridge National Laboratory has made an engineering cost--environmental benefit study of radioactive waste treatment systems for decreasing the amount of radioactive materials released from uranium ore processing mills. This paper summarizes the results of the study which pertain to the control and/or abatement of airborne radioactive materials from the mill processes. The tailings area is not included. Present practices in the uranium milling industry, with particular emphasis on effluent control and waste management, have been surveyed. A questionnaire was distributed to each active mill in the United States. Replies were received from about 75 percent of the mill operators. Visits were made to six operating uranium mills that were selected because they represented the different processes in use today and the newest, most modern in mill designs. Discussions were held with members of the Region IV Office of NRC and the Grand Junction Office of ERDA. Nuclear Science Abstracts, as well as other sources, were searched for literature pertinent to uranium mill processes, effluent control, and waste management

  8. ( Rosa damascena Mill.) by microbial inoculation

    African Journals Online (AJOL)

    This study was carried out to determine the effects of microbial inoculation in breaking seed dormancy and on the germination of Rosa damascena Mill. Seeds of R. damascena Mill. are the most used scented rose species in rose oil production. The most important production centers around the world are Turkey and ...

  9. Optimisation of milling parameters using neural network

    Directory of Open Access Journals (Sweden)

    Lipski Jerzy

    2017-01-01

    Full Text Available The purpose of this study was to design and test an intelligent computer software developed with the purpose of increasing average productivity of milling not compromising the design features of the final product. The developed system generates optimal milling parameters based on the extent of tool wear. The introduced optimisation algorithm employs a multilayer model of a milling process developed in the artificial neural network. The input parameters for model training are the following: cutting speed vc, feed per tooth fz and the degree of tool wear measured by means of localised flank wear (VB3. The output parameter is the surface roughness of a machined surface Ra. Since the model in the neural network exhibits good approximation of functional relationships, it was applied to determine optimal milling parameters in changeable tool wear conditions (VB3 and stabilisation of surface roughness parameter Ra. Our solution enables constant control over surface roughness parameters and productivity of milling process after each assessment of tool condition. The recommended parameters, i.e. those which applied in milling ensure desired surface roughness and maximal productivity, are selected from all the parameters generated by the model. The developed software may constitute an expert system supporting a milling machine operator. In addition, the application may be installed on a mobile device (smartphone, connected to a tool wear diagnostics instrument and the machine tool controller in order to supply updated optimal parameters of milling. The presented solution facilitates tool life optimisation and decreasing tool change costs, particularly during prolonged operation.

  10. Radiological health aspects of uranium milling

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, D.R.; Stoetzel, G.A.

    1983-05-01

    This report describes the operation of conventional and unconventional uranium milling processes, the potential for occupational exposure to ionizing radiation at the mill, methods for radiological safety, methods of evaluating occupational radiation exposures, and current government regulations for protecting workers and ensuring that standards for radiation protection are adhered to. In addition, a survey of current radiological health practices is summarized.

  11. Preliminary Test of Upgraded Conventional Milling Machine into PC Based CNC Milling Machine

    International Nuclear Information System (INIS)

    Abdul Hafid

    2008-01-01

    CNC (Computerized Numerical Control) milling machine yields a challenge to make an innovation in the field of machining. With an action job is machining quality equivalent to CNC milling machine, the conventional milling machine ability was improved to be based on PC CNC milling machine. Mechanically and instrumentally change. As a control replacing was conducted by servo drive and proximity were used. Computer programme was constructed to give instruction into milling machine. The program structure of consists GUI model and ladder diagram. Program was put on programming systems called RTX software. The result of up-grade is computer programming and CNC instruction job. The result was beginning step and it will be continued in next time. With upgrading ability milling machine becomes user can be done safe and optimal from accident risk. By improving performance of milling machine, the user will be more working optimal and safely against accident risk. (author)

  12. Estratificación del bajo peso al nacer desde un enfoque de determinantes sociales

    Directory of Open Access Journals (Sweden)

    Hilda María Delgado Acosta

    2013-03-01

    Full Text Available Fundamento: el área materno-infantil requiere de un enfoque en sus determinantes para aumentar el alcance estratégico de sus programas. Objetivo: estratificar el bajo peso al nacer en el municipio de Cienfuegos y caracterizar el bajo peso de acuerdo a determinantes sociales seleccionadas. Métodos: se realizó un estudio epidemiológico, descriptivo, correlacional sobre la estratificación del bajo peso al nacer en los consejos populares del municipio Cienfuegos, en el período comprendido entre los años 2003 y 2007. Los estratos se definieron según el valor de la media del índice de bajo peso al nacer en este periodo. Para realizar el análisis de las variables cualitativas en muestras independientes se utilizó la prueba de independencia u homogeneidad utilizada en el caso de dos muestras con resultado dicotómico o más. El procesamiento estadístico se realizó en el programa SPSS versión 15,0 y se utilizaron como medidas matemáticas para las variables cualitativas el porcentaje, y para las variables cuantitativas la media aritmética. La técnica estadística para relacionar las variables fue la prueba Chi-cuadrado. Resultados: se mostraron diferencias estadísticamente significativas entre los estratos de bajo, mediano y alto riesgo, en el nivel de escolaridad, estado civil, ocupación, evaluación nutricional, hábito de fumar, antecedentes de bajo peso al nacer, período ínter genésico. La única enfermedad asociada que mostró diferencias entre ellos fue la hipertensión gestacional. Conclusiones: el bajo peso al nacer continúa siendo un serio problema de salud en el municipio Cienfuegos, cuestión esta que debe ser abordada desde sus determinantes para realizar intervenciones futuras y el logro de mejores resultados.

  13. Factores nutricionales maternos y el bajo peso al nacer en un área de salud

    Directory of Open Access Journals (Sweden)

    Arley Rey Vilchez

    2013-01-01

    Full Text Available Fundamento: el bajo peso al nacer es multifactorial y se atribuye a causas maternas, fetales y ambientales. Los hábitos alimentarios inadecuados unidos a otros factores nutricionales maternos son determinantes. Objetivo: identificar los factores nutricionales maternos relacionados con el bajo peso al nacer en pacientes del Área I del municipio Cienfuegos. Métodos: se realizó un estudio analítico, retrospectivo, de casos y controles entre enero 2006 y diciembre 2008. Se estudiaron 50 madres de recién nacidos bajo peso (casos y 100 madres de niños normopesos (controles a razón de 2 por cada caso, seleccionadas del registro de nacimientos del área. Se revisaron las historias clínicas obstétricas y se entrevistó a cada paciente para evaluar sus hábitos alimentarios según frecuencia de comidas y grupos de alimentos consumidos. El procesamiento de la información se realizó utilizando el programa estadístico SPSS versión 15,0. Los resultados se presentaron en tablas con frecuencias absolutas, porcentajes y resultados de las técnicas estadísticas empleadas. Resultados: se comportaron como factores de riesgo: la edad materna, el estado nutricional al inicio del embarazo, la ganancia de peso durante la gestación y la hemoglobina del tercer trimestre. Las mujeres con hábitos alimentarios inestables e insuficientes tuvieron 33 veces más probabilidades de tener neonatos bajo peso y las que refirieron dietas no saludables según grupos de alimentos consumidos tuvieron 9 veces más riesgo. Conclusiones: los factores nutricionales maternos influyeron en la incidencia del bajo peso al nacer, fundamentalmente los hábitos alimentarios inadecuados.

  14. Factores de riesgo de bajo peso al nacer en un hospital cubano, 1997-2000

    Directory of Open Access Journals (Sweden)

    Escobar José Andrés Cabrales

    2002-01-01

    Full Text Available Objetivo. Identificar qué factores de riesgo materno durante el embarazo se asocian a la incidencia de bajo peso al nacer (menos de 2 500 g. Métodos. Se diseñó un estudio de casos y testigos con 764 casos de nacimiento simple con un peso al nacer de menos de 2 500 g, y 1 437 testigos del Hospital Gineco-Obstétrico Provincial de Sancti Spíritus, Cuba, durante el cuatrienio de 1997-2000. Los datos se obtuvieron de historias clínicas, registros de partos y entrevistas personales con las madres. Se realizó un análisis con dos variables y se controlaron los posibles factores de confusión mediante regresión logística dicotómica con el programa SPSS. Se usó un modelo final de múltiples variables para identificar los factores de riesgo maternos asociados con el bajo peso al nacer. Resultados. El análisis con múltiples variables mostró una asociación significativa del bajo peso al nacer con la presencia de anemia en la madre cuando se detectó el embarazo, la sepsis urinaria durante el embarazo, el asma bronquial, un aumento de peso materno menor de 8 kg durante todo el embarazo, el hábito de fumar durante el mismo, antecedentes de bajo peso al nacer en partos anteriores, la presencia de hipertensión arterial desde antes de la gestación y la consulta prenatal extemporánea. Conclusiones. A partir de estos resultados se concluyó que, independientemente de la medida de impacto utilizada, es importante tratar de disminuir los factores de riesgo identificados a fin de reducir la incidencia del bajo peso al nacer en la provincia de Sancti Spíritus.

  15. Factores de riesgo de bajo peso al nacer en un hospital cubano, 1997-2000

    Directory of Open Access Journals (Sweden)

    José Andrés Cabrales Escobar

    2002-09-01

    Full Text Available Objetivo. Identificar qué factores de riesgo materno durante el embarazo se asocian a la incidencia de bajo peso al nacer (menos de 2 500 g. Métodos. Se diseñó un estudio de casos y testigos con 764 casos de nacimiento simple con un peso al nacer de menos de 2 500 g, y 1 437 testigos del Hospital Gineco-Obstétrico Provincial de Sancti Spíritus, Cuba, durante el cuatrienio de 1997-2000. Los datos se obtuvieron de historias clínicas, registros de partos y entrevistas personales con las madres. Se realizó un análisis con dos variables y se controlaron los posibles factores de confusión mediante regresión logística dicotómica con el programa SPSS. Se usó un modelo final de múltiples variables para identificar los factores de riesgo maternos asociados con el bajo peso al nacer. Resultados. El análisis con múltiples variables mostró una asociación significativa del bajo peso al nacer con la presencia de anemia en la madre cuando se detectó el embarazo, la sepsis urinaria durante el embarazo, el asma bronquial, un aumento de peso materno menor de 8 kg durante todo el embarazo, el hábito de fumar durante el mismo, antecedentes de bajo peso al nacer en partos anteriores, la presencia de hipertensión arterial desde antes de la gestación y la consulta prenatal extemporánea. Conclusiones. A partir de estos resultados se concluyó que, independientemente de la medida de impacto utilizada, es importante tratar de disminuir los factores de riesgo identificados a fin de reducir la incidencia del bajo peso al nacer en la provincia de Sancti Spíritus.

  16. Settlement of uranium mill tailings

    International Nuclear Information System (INIS)

    Chen, P.K.; Guros, F.B.; Keshian, B.

    1988-01-01

    Two test embankments were constructed on top of an old tailings deposit near Ambrosia Lake, New Mexico to determine settlement characteristics of hydraulically- deposited uranium mill tailings. Before construction of the embankments, properties of in-situ tailings and foundation soils were determined using data from boreholes, piezocone soundings, and laboratory tests. These properties were used to estimate post-construction settlement of a planned disposal embankment to be constructed on the tailings. However, excessive uncertainty existed in the following: field settlement rates of saturated and unsaturated tailings, degree of preconsolidation of the upper 15 feet of tailings, and the ability of an underlying silty sand foundation layer to facilitate drainage. Thus, assurance could not be provided that differential settlements of the radon barrier and erosion protection layers would be within allowable limits should the planned disposal embankment be constructed in a single-stage

  17. Environmental planning in uranium milling

    International Nuclear Information System (INIS)

    Bertello, L.F.

    1987-01-01

    Effluents from uranium milling in the Achala region in the province of Cordoba are studied. Liquids from lixiviation-recovery and from precipitation-washing of yellow-cake were analyzed. Separation of both liquids before treatment and disposal is recommended. Data of the hydric environment are presented specially for volumes of flow. The disposal criteria established by the provincial authorities are presented, and discussed. Calculations to define the effects on the environment of two types of effluents (the leaching effluent without treatment and the same after treating it) on two points of the rivers net, are given and the results discussed. A disposal policy for a treated effluent of mean composition is presented, based on two different amounts for the two phases of the river flux; the possible effects on two points of the net were also calculated. In the author's opinion, such policy will result in a disposal without a sensible damage in the receptor. (Author) [es

  18. Pulp mill as an energy producer

    International Nuclear Information System (INIS)

    Kaulamo, O.

    1998-01-01

    The recovery boilers of pulp mills are today the most significant producers of wood energy. The power-to-heat ratio of the power plant process, i.e., power yield, is poor in existing applications. In the study, an alternative of improving the power yield of conventional pulp mills significantly was studied by applying solutions used in power plants to a pulp mill. Extensive conversion of wood energy into electricity is possible only in the recovery boiler of the pulp mill and in a large combustion boiler of bark, wood waste and wood chips integrated to this boiler. Hence, the harvest and transports of wood raw materials, i.e. pulp wood and energy wood, are integrated, and the fraction going to cook and the energy wood fraction are separated at the pulp mill. The method guarantees competitive supply of energy wood. As a result a SELLUPOWER mill was designed, where the recovery boiler combusting black liquor and the large power plant boiler combusting energy wood are integrated to one unit and constructed to a power plant process with a high power-to-heat ratio. Necessary technical solutions, project costs and economical feasibility compared to a conventional pulp mill were determined, and the effect of different production-economical parameters was also studied. (orig.)

  19. An extended topological Yang-Mills theory

    International Nuclear Information System (INIS)

    Deguchi, Shinichi

    1992-01-01

    Introducing infinite number of fields, we construct an extended version of the topological Yang-Mills theory. The properties of the extended topological Yang-Mills theory (ETYMT) are discussed from standpoint of the covariant canonical quantization. It is shown that the ETYMT becomes a cohomological topological field theory or a theory equivalent to a quantum Yang-Mills theory with anti-self-dual constraint according to subsidiary conditions imposed on state-vector space. On the basis of the ETYMT, we may understand a transition from an unbroken phase to a physical phase (broken phase). (author)

  20. Coal Moisture Estimation in Power Plant Mills

    DEFF Research Database (Denmark)

    Andersen, Palle; Bendtsen, Jan Dimon; Pedersen, Tom S.

    2009-01-01

    Knowledge of moisture content in raw coal feed to a power plant coal mill is of importance for efficient operation of the mill. The moisture is commonly measured approximately once a day using offline chemical analysis methods; however, it would be advantageous for the dynamic operation...... of the plant if an on-line estimate were available. In this paper we such propose an on-line estimator (an extended Kalman filter) that uses only existing measurements. The scheme is tested on actual coal mill data collected during a one-month operating period, and it is found that the daily measured moisture...

  1. Environmental design of a uranium mill

    International Nuclear Information System (INIS)

    Quan, C.H.; Ring, R.J.; McNaughton, S.J.

    2002-01-01

    In the frame work of the Cleaner Technology Project for Uranium Mining and Milling, Australian Nuclear and Technology Organization (ANSTO), Environment Division of ANSTO has carried out a programme of research which seeks to identify, investigate and develop cleaner technologies that have the potential to minimize the environmental impact of uranium mining and milling. This paper describes three design options of a new uranium mill that can meet environmental, technical and economical objectives. The feasibility of such an approach was examined in the laboratory and in a pilot plant study. (author)

  2. Bajo Peso al Nacer. Factores de riesgo y calidad de la atención Prenatal. Buenaventura. 2008-2009

    Directory of Open Access Journals (Sweden)

    Luis Enrique Gallardo-Ibarra

    2012-01-01

    Full Text Available Se realizó estudio descriptivo sobre Bajo Peso al Nacer, Área de Salud Buenaventura, bienio 2008-2009, sobre factores de riesgo y calidad de la atención médica recibida por las gestantes que aportaron recién nacidos bajo peso. Los datos estadísticos se obtuvieron mediante revisión de historias clínicas familiares, obstétricas y hospitalarias. Se emplearon métodos estadísticos histórico lógico, análisis y síntesis e inducción-deducción. Se obtuvo predominio del CIUR como variedad de Bajo Peso al Nacer, mostraron asociación con el bajo peso al nacer la valoración nutricional Bajo Peso materna al inicio de la gestación, insuficiente ganancia de peso, ingreso percápita bajo, malas condiciones de vivienda, antecedentes de dos o más abortos, multigestación, período intergenésico corto, HTA y sepsis cervicovaginal. La Atención Prenatal fue deficiente. No existió relación entre grupos de edades menores de 20 o mayor de 35 años y hábitos tóxicos con la aparición del bajo peso al nacer.

  3. 21 CFR 515.10 - Medicated feed mill license applications.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Medicated feed mill license applications. 515.10... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS MEDICATED FEED MILL LICENSE Applications § 515.10 Medicated feed mill license applications. (a) Medicated feed mill license applications (Forms FDA 3448) may...

  4. 40 CFR 61.142 - Standard for asbestos mills.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Standard for asbestos mills. 61.142... § 61.142 Standard for asbestos mills. (a) Each owner or operator of an asbestos mill shall either discharge no visible emissions to the outside air from that asbestos mill, including fugitive sources, or...

  5. Rough mill simulator version 3.0: an analysis tool for refining rough mill operations

    Science.gov (United States)

    Edward Thomas; Joel Weiss

    2006-01-01

    ROMI-3 is a rough mill computer simulation package designed to be used by both rip-first and chop-first rough mill operators and researchers. ROMI-3 allows users to model and examine the complex relationships among cutting bill, lumber grade mix, processing options, and their impact on rough mill yield and efficiency. Integrated into the ROMI-3 software is a new least-...

  6. Algas epífitas de Bajo Pepito, Isla Mujeres, Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    L.I Quan-Young

    2006-06-01

    Full Text Available Epiphytic algae from Bajo Pepito, Isla Mujeres, Quintana Roo, México. A total of 96 epiphytic algae species were identified from Bajo Pepito, Quintana Roo, México. 60.4% (58 belonged to the Rhodophyta, 19.79% (19 to the Phaeophyta, 16.6% (16 to the Chlorophyta and 3.1% (3 to the Cyanophyta; 49 species (50.5% were found only in one month, while Heterosiphonia crispella was found in all of the sampled months. That species provided the largest contribution to the biomass of epiphytes. During January we registered the greater biommass and richness of epiphytes species, coincidently with high values of host species cover and rainfall. Rev. Biol. Trop. 54(2: 317-328. Epub 2006 Jun 01.

  7. Estudio de una Cronosecuencia de Suelos en el Bajo Cauca (Antioquia

    Directory of Open Access Journals (Sweden)

    Jaramillo J. Daniel F.

    1996-09-01

    Full Text Available En la región del Bajo Cauca, Antioquia, se estudiaron tres terrazas, a diferentes alturas, las cuales poseen diferencias apreciables entre la evolución de sus respectivos suelos. La terraza de mayor altura presentó los suelos más evolucionados: Typic Paleudult; la de mediana altura presentó suelos de incipiente evolución, clasificados como Typic Dystropept y la de menor altitud presentó suelos recientes, con muy bajo grado de evolución: Tropic Fluvaquent. Las diferencias en evolución observadas entre los suelos se deben a los largos intervalos de tiempo transcurridos entre la formación de los tres niveles de las terrazas. La fertilidad natural de los suelos desarrollados sobre las terrazas alta y media se puede calificar como baja a muy baja; por su parte, la terraza a menor altura posee alta fertilidad.

  8. DESARROLLO E IMPLEMENTACIÓN DE FOTOCONTROL TEMPORIZADO CON TECNOLOGÍA DE BAJO CONSUMO

    Directory of Open Access Journals (Sweden)

    Fredy Hernán Martínez Sarmiento

    2013-09-01

    Full Text Available En este trabajo se presenta el desarrollo e implementación de un fotocontrol con tecnología de bajo consumo desarrollado con un microcontrolador, el cual controla variables de tensión, luminosidad  y sincronización con la red, por medio de  una salida con modo PWM producir una salida de Vdc en el relé. El microcontrolador realiza un  muestreo análogo de voltaje sobre la onda sinusoidal y se hace un filtro de promedio móvil para eliminar ruido de la onda.La temporización se realiza cuando el contacto del relé está cerrado y el tiempo a temporizar es programado por el usuario el cual lo requiera, el fotocontrol presenta un modo de ultra bajo consumo en el microcontrolador con un supercap.

  9. Habilidades pre-escolares de los niños nacidos prematuramente y con bajo peso

    OpenAIRE

    Sasha A. Martínez-Espiet; Irene Sumaza Laborde; Leila Crespo Fernández; Maribel Campos Rivera; Frances Boulon Díaz

    2016-01-01

    RESUMEN: El objetivo de este estudio fue conocer el nivel de desarrollo en la etapa pre-escolar de un grupo de niños nacidos prematuramente y con bajo peso. Se evaluó un grupo 20 niños de cuatro años nacidos prematuramente y con bajo peso y un grupo de 20 niños nacidos luego de gestación completada y peso deseado utilizando la prueba de integración visual-motora Beery-Buktenica. Además, se administró el cuestionario del desarrollo Ages and Stages (ASQ-3) a las 40 madres. El análisis estadísti...

  10. Los exilios de católicos y arrianos bajo Leovigildo y Recaredo

    Directory of Open Access Journals (Sweden)

    Vallejo Girvés, Margarita

    2003-06-01

    Full Text Available In this paper we try to analyse the various topics of the exile that have been applied by the visigothic kings Leovigild and Reccared. It is known that most part of the individuals that had suffered this exile were ecclesiasticals, catholics under Leovigild and arians during Reccared, but all of them were of germanic origin.

    En este artículo se analizan los diversos tipos de exilio que aplicaron los monarcas visigodos Leovigildo y Recaredo. Se da la circunstancia de que la mayoría de ellos fueron eclesiásticos y que bajo Leovigildo lo sufrieron singularmente los católicos y los arríanos bajo Recaredo, pero en ambos casos todos los condenados son de origen germánico.

  11. Effects of milling on functional properties of rice flour.

    Science.gov (United States)

    Kadan, R S; Bryant, R J; Miller, J A

    2008-05-01

    A commercial long-grain rice flour (CRF) and the flours made by using a pin mill and the Udy mill from the same batch of broken second-head white long-grain rice were evaluated for their particle size and functional properties. The purpose of this study was to compare the commercial rice flour milling method to the pin and Udy milling methods used in our laboratory and pilot plant. The results showed that pin milled flour had more uniform particle size than the other 2 milled flours. The chalky kernels found in broken white milled rice were pulverized more into fines in both Udy milled flour and CRF than in the pin milled flour. The excessive amount of fines in flours affected their functional properties, for example, WSI and their potential usage in the novel foods such as rice breads (RB). The RB made from CRF collapsed more than loaves made from pin milled Cypress long-grain flours.

  12. Uranium Mill and ISL Facility Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — An Excel database on NRC and Agreement State licensed mills providing status, locational/operational/restoration data, maps, and environmental reports including...

  13. Two loop diagrams in Yang Mills theory

    International Nuclear Information System (INIS)

    Jones, D.R.T.

    1974-01-01

    A calculation of the renormalization constants of the Yang Mills field to 0(g 4 ) is presented. The function β(g) is hence evaluated to 0(g 5 ) and possible implications for gauge theories of the strong interactions discussed

  14. Health risks from uranium mill tailings

    International Nuclear Information System (INIS)

    Russell, J.L.

    1992-01-01

    This paper reviews the risk to public health and the environment from uranium mill tailings. The steps taken by the Environmental Protection Agency (EPA) to reduce this risk from tailing are summarized

  15. Uranium mill tailings remedial action technology

    International Nuclear Information System (INIS)

    Hartley, J.N.; Gee, G.W.

    1984-01-01

    The uranium milling process involves the hydrometallurgical extraction of uranium from ores and the resultant generation of large quantities of waste referred to as tailings. Uranium mill tailings have been identified as requiring remediation because they contain residual radioactive material that is not removed in the milling process. Potential radiation exposure can result from direct contact with the tailings, from radon gas emitted by the tailings, and from radioactive contamination of groundwater. As a result, the technology developed under the US Department of Energy (DOE) Uranium Mill Tailings Remedial Action Project (UMTRAP) and the US Nuclear Regulatory Commission (NRC) Uranium Recovery Program have focused on radon control, groundwater contamination and the long-term protection of the containment system. This paper briefly summarizes the UMTRAP and NRC remedial action technology development. 33 references, 9 figures, 5 tables

  16. Mineralogy and geochemistry of uranium mill tailings

    International Nuclear Information System (INIS)

    Pagel, M.; Somot, S.

    2002-01-01

    We have investigated three main types of uranium mill tailings: (1) acid mill tailings (Mounana, Gabon), (2) neutralized acid mill tailings (Ecarpiere and Jouac, France) and (3) alkaline mill tailings (Lodeve, France). We have focused especially on radium behaviour which is of major environmental concern in these tailings, but other metals were also studied. It is shown that in type 1 , trapping of 226 Ra by anglesite and barite is dominant whereas in types 2 and 3, 226 Ra is mainly or significantly scavenged by Fe- Mn oxyhydroxides. This study points out the importance of keeping conditions in which these oxyhydroxides will be stable for the long-term. Uranium would be also released during acidification of the tailings. This shows the importance to know more about the behavior of Ra during the crystallization of oxyhydroxides and during tailings diagenesis. Therefore, it is very important to study the sorption of Ra by clay minerals or late authigeneous minerals such as barite. (author)

  17. Bajo rendimiento escolar: una perspectiva desde el desarrollo del sistema nervioso

    Directory of Open Access Journals (Sweden)

    K. Shapiro Bruce, MD.

    2011-03-01

    Full Text Available El bajo rendimiento escolar es un problema frecuente y tiene múltiples causas; las alteraciones que lo caracterizan, se expresan fundamentalmente en las áreas de funcionamiento cognitivo, académico y conductual. El bajo rendimiento escolar es una vía final común de diferentes trastornos, etiologías y mecanismos. Es habitual la presencia de múltiples alteraciones, porque la disfunción cerebral en la niñez generalmente afecta a muchas funciones. Consecuente con lo anterior, los programas de manejo deben ser individualizados, comprensivos e incorporar aspectos del niño en particular, la escuela y la familia. La planificación del tratamiento incluye, educación y entrenamiento de los padres, adecuaciones académicas, técnicas para mantener la autoestima y un enfoque psicofarmacológico. Es necesario monitorear en forma continua los programas de manejo especialmente para detectar comorbilidades importantes que puedan emerger, para realizar modificaciones que se adecuen a los cambios en las demandas académicas y sociales a las diferentes edades del niño y para proveer de información actualizada. Las consecuencias que tenga el bajo rendimiento escolar para el niño dependerán en medida importante de las alteraciones subyacentes. El personal de salud tiene múltiples roles en la prevención, detección, diagnóstico y manejo del niño con bajo rendimiento escolar.

  18. Infrared finiteness in Yang--Mills theories

    International Nuclear Information System (INIS)

    Appelquist, T.; Carazzone, J.; Kluberg-Stern, H.; Roth, M.

    1976-01-01

    The infrared divergences of renormalizable theories with coupled massless fields (in particular, the Yang--Mills theory) are shown to cancel for transition probabilities corresponding to finite-energy-resolution detectors, just as in quantum electrodynamics. This result is established through lowest nontrivial order in perturbation theory for the detection of massive muons in a quantum electrodynamic theory containing massless electrons or the detection of massive quarks in a Yang--Mills theory

  19. VOC Control in Kraft Mills; FINAL

    International Nuclear Information System (INIS)

    Zhu, J.Y.; Chai, X.-S.; Edwards, L.L.; Gu, Y.; Teja, A.S.; Kirkman, A.G.; Pfromm, P.H.; Rezac, M.E.

    2001-01-01

    The formation of volatile organic compounds (VOCs), such as methanol, in kraft mills has been an environmental concern. Methanol is soluble in water and can increase the biochemical oxygen demand. Furthermore, it can also be released into atmosphere at the process temperatures of kraft mill-streams. The Cluster Rule of the EPA now requires the control of the release of methanol in pulp and paper mills. This research program was conducted to develop a computer simulation tool for mills to predict VOC air emissions. To achieve the objective of the research program, much effort was made in the development of analytical techniques for the analysis of VOC and determination of vapor liquid partitioning coefficient of VOCs in kraft mill-streams using headspace gas chromatography. With the developed analytical tool, methanol formation in alkaline pulping was studied in laboratory to provide benchmark data of the amount of methanol formation in pulping in kraft mills and for the validation of VOC formation and vapor-liquid equilibrium submodels. Several millwide air and liquid samplings were conducted using the analytical tools developed to validate the simulation tool. The VOC predictive simulation model was developed based on the basic chemical engineering concepts, i.e., reaction kinetics, vapor liquid equilibrium, combined with computerized mass and energy balances. Four kraft mill case studies (a continuous digester, two brownstock washing lines, and a pre-evaporator system) are presented and compared with mill measurements. These case studies provide valuable, technical information for issues related to MACT I and MACT II compliance, such as condensate collection and Clean-Condensate-Alternatives (CCA)

  20. Palm Oil Milling Wastes and Sustainable Development

    OpenAIRE

    A. C. Er; Abd. R.M. Nor; Katiman Rostam

    2011-01-01

    Problem statement: Palm oil milling generates solid wastes, effluent and gaseous emissions. The aim of this study is to assess the progress made in waste management by the Malaysian palm oil milling sector towards the path of sustainable development. Sustainable development is defined as the utilization of renewable resources in harmony with ecological systems. Inclusive in this definition is the transition from low value-added to higher value-added transformation of waste...

  1. Actualización en el manejo del colesterol hdl bajo

    Directory of Open Access Journals (Sweden)

    Rigotti R. Attilio, Dr.

    2012-11-01

    Full Text Available Los niveles plasmáticos bajos de colesterol transportado en las lipoproteínas de alta densidad (HDL constituyen un elemento independiente de riesgo cardiovascular ateroesclerótico. Algunos protocolos clínicos enfocados en el manejo farmacológico de los niveles bajos de colesterol HDL en pacientes de alto riesgo cardiovascular han mostrado resultados favorables. Por otro lado, existen nuevas formulaciones de la niacina, el agente farmacológico disponible más efectivo para el manejo del colesterol HDL bajo, y se están desarrollando nuevos fármacos más potentes para aumentar los niveles plasmáticos de colesterol HDL. En el futuro, nuevos medicamentos que modulen el metabolismo de HDL y demuestren beneficio sobre el control del riesgo cardiovascular ateroesclerótico, podrían mejorar aún más el manejo actual de esta condición patológica que se basa esencialmente en el uso de estatinas.

  2. Perfil cognitivo de niños con rendimientos bajos en comprensión lectora

    Directory of Open Access Journals (Sweden)

    Lorena Canet-Juric

    2013-10-01

    Full Text Available La mayoría de los niños con dificultades en la comprensión lectora poseen rendimientos inferiores en un conjunto de procesos cognitivos. El objetivo del presente estudio es establecer un perfil cognitivo asociado al bajo rendimiento en comprensión lectora en relación a la habilidad de monitoreo, a la producción de inferencias, al vocabulario, a la amplitud de memoria de trabajo y a la capacidad inhibitoria, en niños hispanoparlantes. Para ello se administraron tareas correspondientes a dichos procesos en niños con altos y bajos rendimientos en comprensión lectora. Los resultados mostraron que si bien los niños con mala comprensión presentan bajos rendimientos en estas habilidades, no puede establecerse un perfil consistente ya que hay niños con problemas en comprensión que presentan normal o superior rendimiento en algunas de estas habilidades cognitivas.

  3. Yang Mills instantons, geometrical aspects

    International Nuclear Information System (INIS)

    Stora, R.

    1977-09-01

    The word instanton has been coined by analogy with the word soliton. They both refer to solutions of elliptic non linear field equations with boundary conditions at infinity (of euclidean space time in the first case, euclidean space in the second case) lying on the set of classical vacua in such a way that stable topological properties emerge, susceptible to survive quantum effects, if those are small. Under this assumption, instantons are believed to be relevant to the description of tunnelling effects between classical vacua and signal some characteristics of the vacuum at the quantum level, whereas solitons should be associated with particles, i.e. discrete points in the mass spectrum. In one case the euclidean action is finite, in the other case, the energy is finite. From the mathematical point of view, the geometrical phenomena associated with the existence of solitons have forced physicists to learn rudiments of algebraic topology. The study of euclidean classical Yang Mills fields involves naturally mathematical items falling under the headings: differential geometry (fibre bundles, connections); differential topology (characteristic classes, index theory) and more recently algebraic geometry. These notes are divided as follows: a first section is devoted to a description of the physicist's views; a second section is devoted to the mathematician's vie

  4. Effects of Dry-Milling and Wet-Milling on Chemical, Physical and Gelatinization Properties of Rice Flour

    Directory of Open Access Journals (Sweden)

    Jitranut Leewatchararongjaroen

    2016-09-01

    Full Text Available Rice flour from nine varieties, subjected to dry- and wet-milling processes, was determined for its physical and chemical properties. The results revealed that milling method had an effect on properties of flour. Wet-milling process resulted in flour with significantly lower protein and ash contents and higher carbohydrate content. Wet-milled flour also tended to have lower lipid content and higher amylose content. In addition, wet-milled rice flour contained granules with smaller average size compared to dry-milled samples. Swelling power at 90 °C of wet-milled samples was higher while solubility was significantly lower than those of dry-milled flour. Dry milling process caused the destruction of the crystalline structure and yielded flour with lower crystallinity compared to wet-milling process, which resulted in significantly lower gelatinization enthalpy.

  5. Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data

    OpenAIRE

    Garc?a Nieto, Paulino Jos?; Garc?a-Gonzalo, Esperanza; Ord??ez Gal?n, Celestino; Bernardo S?nchez, Antonio

    2016-01-01

    Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combination with multivariate adaptive regression splines (MARS) technique. This optimization mechanism i...

  6. Influence of rice sample preparation and milling procedures on milling quality appraisals

    Science.gov (United States)

    The objective of this research was to investigate the effect of sample preparation and milling procedure on milling quality appraisals of rough rice. Samples of freshly harvested medium-grain rice (M202) with different initial moisture contents (MCs) ranging from 20.2% to 25.1% (w.b.) were used for...

  7. Learning Activity Packets for Milling Machines. Unit I--Introduction to Milling Machines.

    Science.gov (United States)

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This learning activity packet (LAP) outlines the study activities and performance tasks covered in a related curriculum guide on milling machines. The course of study in this LAP is intended to help students learn to identify parts and attachments of vertical and horizontal milling machines, identify work-holding devices, state safety rules, and…

  8. Improving milling and production of a dust-producing unit equipped with hammer mills

    Energy Technology Data Exchange (ETDEWEB)

    Vorotnikov, Ye.G.; Nikiforov, A.A.; Rasputin, O.V.; Sukhunin, V.I.

    1982-01-01

    This paper presents generalized experience for deriving coarse ground coal dust in hammer mills by providing comparison data on improving efficiency of operation of the unit when switching to a coarser-type grind of the fuel. Need to have more precise formulas to calculate grinding potential of hammer mills when using a coarser grind is shown.

  9. Uranium mill tailings conditioning technology

    International Nuclear Information System (INIS)

    Dreesen, D.R.; Cokal, E.J.; Wangen, L.E.; Williams, J.M.; O'Brien, P.D.; Thode, E.F.

    1982-01-01

    Conditioning of uranium mill tailings involves the physicochemical alteration of tailings to remove or immobilize mobile radionuclides and toxic trace elements before disposal in a repository. The principal immobilization approach under investigation is sintering tailings at high temperatures (1100-1200 deg. C) to radically alter the structure of tailings. This thermal stabilization at 1200 deg. C reduced radon emanation power for tailings sands by factors of 20 to 200 and for tailings fines by factors of 300 to 1100. Substantial reductions in the leachability of most contaminants have been found for thermally conditioned tailings. Obvious mineral transformations occur, including an increase in amorphous material, the conversion of gypsum to anhydrite and its subsequent decomposition, the disappearance of clay minerals, and some decrease in quartz content. A conceptual thermal stabilization process has been developed wherein obsolete coal-fired rotary cement kilns perform the sintering. An economic analysis of this conceptual process has shown that thermal stabilization can be competitive at certain tailings sites with other remedial actions requiring the excavation, transportation, and burial of tailings in a repository. An analysis of the long-term radiological hazard posed by untreated tailings and by tailings conditioned by radionuclide removal has illustrated the necessity of extracting both 226 Ra and 230 Th to achieve long-term hazard reductions. Sulphuric acid extraction of residual mineral values and important radionuclides from tailings has been investigated. Concentrated H 2 SO 4 can extract up to 80% of the 226 Ra, 70% of the Ba, and 90% of the 230 Th from tailings in a single stage extraction. An economic analysis of a sulphuric acid leach process was made to determine whether the value of minerals recovered from tailings would offset the leaching cost. For one relatively mineral-rich tailings pile, the U and V values would more than pay for the

  10. Reclamation of uranium mining and milling disturbances

    International Nuclear Information System (INIS)

    Farmer, E.E.; Schuman, G.E.

    1987-01-01

    Since 1945 the history of uranium mining and milling in the US has been a story of wide fluctuations in market prices and in mining and milling capacity. The late 1960's and the 1970's saw a sizeable reduction in the production of yellowcake because of an earlier over-supply, a leveling off of the military demand, and a failure of the nuclear electric power industry to create the anticipated commercial demand. The decline in the domestic production of yellowcake has continued through the early 1980's to the present. Today, there are five operating uranium mills in the US: one in Wyoming, two in Utah, one in New Mexico, and one in Texas. Of these five mills, three are operating on a reduced schedule, as little as three days a month. A significant portion of the current US production of uranium goes overseas to fulfill Japanese, French, and other European contracts. There is still a sizeable reclamation job to be accomplished on old uranium wastes, both tailings impoundments and overburden embankments. Before the Uranium Mill Tailings Control Act of 1978 (PL 95-604), reclamation was frequently omitted altogether, or else done in a haphazard fashion. We do not know the total area of unreclaimed, radioactive, uranium overburden wastes in the western US, but the area is large, probably several thousand hectares. Fortunately, these overburden wastes are almost entirely located in remote areas. Mill tailings are more difficult to reclaim than overburden, and tailings represent a more serious health hazards. There are approximately 25 million metric tons of unreclaimed uranium mill tailings, with variable health hazards, located in the US

  11. Decontamination effect of milling by a jet mill on bacteria in rice flour.

    Science.gov (United States)

    Sotome, Itaru; Nei, Daisuke; Tsuda, Masuko; Mohammed, Sharif Hossen; Takenaka, Makiko; Okadome, Hiroshi; Isobe, Seiichiro

    2011-06-01

    The decontamination effect of milling by a jet mill was investigated by counting the number of bacteria in brown and white rice flour with mean particle diameters of 3, 20, and 40µm prepared by the jet mill. In the jet mill, the particles are crushed and reduced in size by the mechanical impact caused by their collision. Although the brown and white rice grains were contaminated with approximately 10(6) and 10(5) CFU/g bacteria, the microbial load of the rice flour decreased as the mean particle diameter decreased, ultimately decreasing to approximately 104 and 103 CFU/g in the brown and white rice flour. The temperature and pressure changes of the sample were not considered to have an effect on reducing the bacterial count during the milling. Hence, it was thought that the rice flour was decontaminated by other effects.

  12. Evaluación del crecimiento y productividad del tomate (Lycopersicon esculentum Mill bajo cultivo protegido en tres localidades de Costa Rica

    Directory of Open Access Journals (Sweden)

    Carlos Ramírez Vargas

    2012-05-01

    Full Text Available Mediante un experimento, se evaluó el crecimien- to y la productividad de tres genotipos de tomate en tres localidades de Costa Rica con un sistema de cultivo protegido (San Blas de Carrillo en la pro- vincia de Guanacaste; Santa Clara de San Carlos en la Provincia de alajuela y también en Zapote de Zarcero en la provincia de alajuela. Se evaluaron 19 variables fisiológicas de crecimiento y produc- tividad para nueve tratamientos o interacciones. A los datos obtenidos se les hizo un análisis de com- ponentes principales y como resultado de este aná- lisis se seleccionaron los dos primeros componentes que explican más del 70% de la variabilidad total, también se determinó que el componente princi- pal 1 explica el crecimiento del cultivo, y su variable representativa fue el peso seco de tallos; mientras que el componente 2 representa el rendimiento, y su variable representativa fue el peso seco de frutos. Se encontró también interacción de los genotipos con los ambientes pese a ser cultivados en inverna- dero, lo que demuestra una adaptación específica de los genotipos a las localidades que mostraron datos climáticos diferentes. La productividad de los geno- tipos también fue influenciada por los ambientes, sin embargo, no superaron los diez kilogramos de fruta fresca por planta.

  13. Practitioner Profile: An Interview With Amanda Mills

    Directory of Open Access Journals (Sweden)

    Amanda Mills

    2012-01-01

    Full Text Available For more than 25 years, Amanda Mills has been working with arts organizations across Canada and with artists of all kinds to assist them in achieving financial sanity. She has taught business management at the University of Victoria and has prepared thousands of tax returns for writers, visual artists, choreographers, actors, filmmakers, broadcasters, and creative entrepreneurs. Ten years ago, bringing together her work on trauma, with twenty years of business management, Mills founded Loose Change Financial Therapy – the place where money and feelings meet. Mills has presented Loose Change workshops for social workers, teachers, psychotherapists, artists, anti-poverty activists, sex trade workers, women’s groups, and the general public.  She has been a guest on major Canadian radio and television broadcasts and profiled in many major Canadian newspapers and periodicals. Mills is also a crisis counselor and co-wrote a bestselling book on recovering from trauma. A tax professional and business manager, she is certified as a financial counselor under the Bankruptcy and Insolvency Act. Mills is also currently completing a certificate in mediation.

  14. GEOMETRICAL CHARACTERIZATION OF MICRO END MILLING TOOLS

    DEFF Research Database (Denmark)

    Borsetto, Francesca; Bariani, Paolo

    The milling process is one of the most common metal removal operation used in industry. This machining process is well known since the beginning of last century and has experienced, along the years, many improvements of the basic technology, as concerns tools, machine tools, coolants/lubricants, ......The milling process is one of the most common metal removal operation used in industry. This machining process is well known since the beginning of last century and has experienced, along the years, many improvements of the basic technology, as concerns tools, machine tools, coolants....../lubricants, milling strategies and controls. Moreover the accuracy of tool geometry directly affects the performance of the milling process influencing the dimensional tolerances of the machined part, the surface topography, the chip formation, the cutting forces and the tool-life. The dimensions of certain...... geometrical details, as for instance the cutting edge radius, are determined by characteristics of the manufacturing process, tool material, coating etc. While for conventional size end mills the basic tool manufacturing process is well established, the reduction of the size of the tools required...

  15. Optimization of FIB milling for rapid NEMS prototyping

    DEFF Research Database (Denmark)

    Malm, Bjarke; Petersen, Dirch Hjorth; Lei, Anders

    2011-01-01

    We demonstrate an optimized milling technique to focused ion beam (FIB) milling in template silicon membranes for fast prototyping of nanoelectromechanical systems (NEMS). Using a single-pass milling strategy the highly topology dependent sputtering rate is boosted and shorter milling time...... is achieved. Drift independence is obtained for small critical features using a radial scan strategy, and a back scan routine ensures minimal line width deviation removing redeposited material. Milling a design similar to a nano four-point probe with a pitch down to 400nm we display what optimized FIB milling...

  16. Condiciones de trabajo materno y bajo peso al nacer en la Ciudad de México

    Directory of Open Access Journals (Sweden)

    PRUDENCIA CERÓN-MIRELES

    1997-01-01

    Full Text Available Objetivo. Estudiar la asociación entre condiciones de trabajo materno y bajo peso al nacer en la Ciudad de México. Material y métodos. Se encuestaron 2 623 trabajadoras que atendieron sus partos en tres grandes hospitales de la Ciudad de México en 1992. Se obtuvo información sobre los principales factores biológicos y sociales que se asocian al bajo peso al nacer; asimismo, se determinó el estrés ocupacional utilizando el instrumento desarrollado por Karasek. Se utilizaron modelos de regresión logística para evaluar la relación de las condiciones de trabajo con el bajo peso al nacer, controlando por variables confusoras. Resultados. El bajo peso al nacer fue más alto en trabajadoras con jornadas mayores a 50 horas semanales (RM= 1.6; IC= 1.17, 2.28 y con conflictos laborales (RM= 1.5; IC= 1.0, 2.25. La falta de apoyo social tangible fue identificado como un factor de riesgo de bajo peso al nacer (RM= 1.7; IC= 1.20, 2.33. Las medidas preventivas laborales como el cambio de tareas, disminución de la jornada y las salidas por enfermedad no mostraron un efecto benéfico en el peso al nacer, a excepción de la licencia de maternidad; las madres que no la tuvieron mostraron una probabilidad 2.2 veces mayor para bajo peso al nacer (IC= 1.66, 2.93. Conclusiones. Estos hallazgos resaltan la importancia de identificar los factores de riesgo ocupacional en el embarazo..Objective. To study the association between maternal working conditions and low birth-weight in Mexico City. Material and methods. Interviews of 2 623 workers who gave birth in Mexico City hospitals during 1992 were analyzed. Information on the main biologic and social factors associated to low birth-weight was registered. Occupational stress was determined with the instrument designed by Karasek. Logistic regression models to evaluate the relationship between working conditions and low birth-weight were used, controlling by confounding variables. Results. Low birth-weight was

  17. The postharvest of mill olives

    Directory of Open Access Journals (Sweden)

    Yousfi, Khaled

    2006-03-01

    Full Text Available The greatest deterioration of olive oil is due to poor handling of the olives during the time between harvesting and processing. Storage of olive fruits is carried out by simple heaping in fruit piles, waiting their processing. These fruits develop all kinds of degenerative processes in a short period of time. Oils obtained from them show characteristics hydrolytic and oxidative deteriorations confirmed by their high acidity values, peroxide value or ultraviolet absorbance at 232 and 270 nm. To avoid this situation, the industry is currently reducing the interval between harvesting and processing, through an increase in milling capacity. However, the equipment necessary for preventing the accumulation of fruit in January would be unnecessary for the rest of the season. In this chapter, refrigeration of the olive fruits, or the use of physical treatments, to allow the processing of unripe fruits, are analysed as possible alternatives.El mayor deterioro del aceite de oliva es debido a la inadecuada manipulación de las aceitunas durante el tiempo que media entre su cosecha y su procesado. El almacenamiento de las aceitunas se lleva acabo mediante el simple amontonamiento del fruto, esperando su procesamiento. Estos frutos desarrollan toda clase de procesos degenerativos en un corto periodo de tiempo. Los aceites obtenidos a partir de estos frutos exhiben deterioros hidrolíticos y oxidativos característicos, confirmados por sus valores altos de acidez, de índice de peróxidos o de absorbancia en la región ultravioleta a 232 y 270 nm. Para evitar esta situación, la industria intenta reducir al máximo el intervalo entre la cosecha y el procesado del fruto, mediante un aumento de la capacidad de molturación. Sin embargo, el equipo necesario para prevenir la acumulación de fruto en Enero no se precisa para el resto de la campaña. En este capítulo, la refrigeración de las aceitunas o el uso de tratamientos físicos, que permiten el procesado

  18. Integrated chemical plants at the pulp mill

    Energy Technology Data Exchange (ETDEWEB)

    Ehtonen, P.; Hurme, M.; Jaervelaeinen, M.

    1995-12-31

    The goal of this paper is to present how the chemical plants can be integrated to the pulp mill. The integration renders possible to balance the chemical consumptions. The total mass balance of a pulp mill with the incoming fuel material and the outgoing waste and flue gases are discussed. The balance figures are presented for the chemicals of the modern fibre line, which will produce fully bleached softwood pulp with an improved effluent quality. The main benefits are lower chemical and transportation costs. The principal over-all plant process block diagrams and process descriptions are presented. The presented info system provides real time information on process and production status at overall mill and department levels. (author)

  19. Higher derivative super Yang-Mills theories

    International Nuclear Information System (INIS)

    Bergshoeff, E.; Rakowski, M.; Sezgin, E.

    1986-11-01

    The most general higher derivative Yang-Mills actions of the type (F 2 +α2F 4 ) which are globally supersymmetric up to order α 2 in six and ten dimensional spacetimes are given. The F 4 -terms turn out to occur in the combination α 2 (tr F 4 - 1/4(tr F 2 ) 2 ), where the trace is over the Lorentz indices. This result agrees with the low energy limit of the open superstring in ten dimensions, where α is the string tension. Surprisingly, the transformation rules of the Yang-Mills multiplet receive order α 2 corrections even in the off-shell formulation. For the case of Abelian Yang-Mills group, the action is expressed in Born-Infeld form with a metric generically given by (1+α 2 F 2 +...). (author)

  20. Recycling of mill scale in sintering process

    Directory of Open Access Journals (Sweden)

    El-Hussiny N.A.

    2011-01-01

    Full Text Available This investigation deals with the effect of replacing some amount of Baharia high barite iron ore concentrate by mill scale waste which was characterized by high iron oxide content on the parameters of the sintering process., and investigation the effect of different amount of coke breeze added on sintering process parameters when using 5% mill scale waste with 95% iron ore concentrate. The results of this work show that, replacement of iron ore concentrate with mill scale increases the amount of ready made sinter, sinter strength and productivity of the sinter machine and productivity at blast furnace yard. Also, the increase of coke breeze leads to an increase the ready made sinter and productivity of the sintering machine at blast furnace yard. The productivity of the sintering machine after 5% decreased slightly due to the decrease of vertical velocity.

  1. Usos del celular en jóvenes chilenos de bajos recursos

    OpenAIRE

    Margarita Pedreros-Gajardo; Luis Araya-Castillo

    2013-01-01

    En este trabajo analizamos los significados que los jóvenes y las jóvenes de Chile de bajos recursos atribuyen a la compra, uso y tenencia de un celular. La investigación cualitativa utilizada no sólo nos permitió descubrir las necesidades que los sujetos jóvenes buscan satisfacer con la compra y/o uso de un celular, sino también los factores socioculturales que determinan este comportamiento de compra. La importancia del presente no es sólo por la pretensión de ser un estudio sociológico sob...

  2. Bluetooth 4.0 Low Energy: la futura solucion inalambrica de bajo consumo

    OpenAIRE

    Morales Pedro, Ricard

    2011-01-01

    En los últimos años el sector de las telecomunicaciones se ha erigido como uno de los mas innovadores de nuestra sociedad, donde la irrupción de nuevos estandares de comunicación inalambrica esta permitiendo ir eliminando la necesidad de los cables de transmisión para conectar dispositivos. Con este proposito nació Bluetooth, una tecnologia que permite transmisiones inalambricas de corto alcance de forma robusta y sencilla, junto con un consumo reducido y un bajo coste. Tras la aparición de B...

  3. Sobre un modelo de Holthausen para la empresa competitiva bajo incertidumbre en el precio

    OpenAIRE

    Álvarez López, A. A.

    1999-01-01

    El modelo presentado por HOLTHAUSEN (1979) amplía el modelo original de SANDMO (1971) para una empresa competitiva bajo incertidumbre en el precio y aversión al riesgo. La aportación esencial de HOLTHAUSEN es la de considerar que existe un mercado de futuros para el bien que la empresa produce, lo que causa que el comportamiento de ésta frente al riesgo sea diferente. En este trabajo planteamos el problema de decisión de la empresa del modelo de HOLTHAUSEN como un problema de optimización de ...

  4. Efectos del bajo peso materno preconcepcional sobre el embarazo y el parto

    OpenAIRE

    López Montero, Maribel; Trufero Cánovas, Norma

    2006-01-01

    Se realizó un estudio de cohorte no concurrente pareado 1:1 para investigar los efectos del bajo peso materno preconcepcional (malnutrición materna por defecto) sobre el embarazo, el parto y el recién nacido en el Policlínico Finlay del municipio Camagüey desde octubre de 2002 hasta abril de 2004. Fueron estudiadas 51 gestantes malnutridas por defecto y 51 embarazadas sin riesgo. Los datos fueron tomados a partir de los registros oficiales de la atención perinatal complementados con una encue...

  5. Alumnos con Bajo Rendimiento Escolar, los blogs y el tutor de Primaria

    OpenAIRE

    Rico-Sánchez, Jesús David

    2013-01-01

    Teniendo en cuenta el problema que tiene el sistema educativo español con un índice muy elevado de fracaso escolar, se pretendió investigar concretamente sobre los alumnos del sexto curso de Primaria que presentan Bajo Rendimiento Escolar aprovechando los avances tecnológicos existentes en la actualidad y que han penetrado con gran fuerza en la sociedad. Por ello, el problema planteado en este trabajo es estudiar si el potencial motivador, comunicativo y utilitario del Edublog puede ayudar a ...

  6. La identificación de espacios mineros e industriales abandonados: el caso del Bajo Besaya

    OpenAIRE

    García Valiente, Nieves; Nogués Linares, Soledad

    2014-01-01

    La recuperación de los terrenos conocidos como “brownfields” es un tema recurrente en las políticas del suelo y el medio ambiente de la Unión Europea para el horizonte 2020. Con una tradición eminentemente industrial y minera, el Bajo Besaya presenta, en la actualidad, amplios espacios abandonados degradados, que son el resultado del cese de las actividades productivas anteriores. Éstos suponen un detrimento para la zona, por lo que es necesaria su transformación de pasivos ambientales y soci...

  7. Análisis del bajo peso en la atención primaria

    Directory of Open Access Journals (Sweden)

    Miguel Lugones Botell

    1995-08-01

    Full Text Available Se realiza un estudio retrospectivo de algunos aspectos relacionados con la atención prenatal de las gestantes y su análisis correspondiente, que tuvieron recién nacidos de bajo peso en el período comprendido entre 1988 y 1991, ambos inclusive. Se concluye que los principales factores relacionados con éste fueron: nuliparidad, madre trabajadora, poca ganancia de peso en el embarazo y entre las afecciones asociadas con la gestación encontramos la amenaza de aborto, la anemia y la enfermedad hipertensiva del embarazo, entre las más frecuentes.

  8. Análisis del amortiguamiento en vidrio estructural bajo cargas de impacto

    OpenAIRE

    Ramos, Alberto; Pelayo, F.; Lamela, María Jesús; Fernández Canteli, Alfonso; Huerta Gómez de Merodio, María Consuelo; Pacios Alvarez, Antonia

    2013-01-01

    Los últimos avances tecnológicos y las tendencias arquitectónicas actuales han impulsado notablemente el uso de una gran variedad de productos de vidrio en la construcción que, en función de sus propias características, permiten diseñar y calcular elementos estructurales de este material bajo condiciones de seguridad. Este trabajo presenta la evaluación y el análisis de las propiedades de amortiguamiento de placas rectangulares de vidrio laminado de 1938 mm x 876 mm con distinto espesor, segú...

  9. Corrosión microbiológica en aceros de bajo carbono

    OpenAIRE

    Medina-Custodio, O; Ortiz-Prado, A; Jacobo-Armendáriz, V.H.; Schouwenaars-Franssens, R

    2009-01-01

    La corrosión microbiológica es un tipo común de deterioro que afecta diversas industrias, una de ellas es la petrolera en la que se estiman que el 20% o 30% de fallas en las tuberías de trasporte de hidrocarburos es favorecida por microorganismos. Las reacciones químicas que sustentan éstos, generan transferencia de iones, lo que justifica el empleo de técnicas electroquímicas para su análisis. En este trabajo, se estudiaron probetas de acero de bajo carbono SAE 1018, sumergidas en un medio n...

  10. Involucramiento parental escolar en alumnos de bachillerato de alto y bajo rendimiento

    OpenAIRE

    Ortega Pierres, Susana; Andrade, Patricia; Vásquez Olmedo, Claudia Elena

    2016-01-01

    El Sistema Educativo Mexicano enfrenta problemas como bajo desempeño y reprobación, circunstancias que anteceden el abandono escolar, el cual se ubica como un fenómeno multicausal, en el que además de los diversos factores relacionados (personales, familiares, escolares, económicos sociales, etc.) se caracteriza por una tendencia a incrementarse conforme los alumnos avanzan en la escuela. De 100 alumnos que ingresan a primaria, 24 concluyen el nivel medio superior y de estos solo 14 concluyen...

  11. Evaluación de un cluster bajo agricultura protegida en México

    OpenAIRE

    Padilla-Bernal, Luz Evelia; Reyes-Rivas, Eliver; Pérez-Veyna, Óscar

    2012-01-01

    El naciente cluster de tomate bajo agricultura protegida en Zacatecas enfrenta el reto de participar en los mercados globales de una manera sostenible; una respuesta viable para ello es elevar su capacidad de upgrading. En este trabajo se determina la relación entre la eficiencia colectiva en el upgrading del cluster. La información se obtuvo a través de un cuestionario aplicado a técnicos de las unidades de producción (UP), el cual se complementó con entrevistas a propietarios o gerentes, in...

  12. La importancia de los materiales en las viviendas de muy bajo coste

    OpenAIRE

    Salas, Julián

    1992-01-01

    El texto que sigue se encuadra en el contexto de intentar enmarcar la importancia considerable del capítulo de los materiales de construcción en el subsector de las viviendas de muy bajo coste en los Países en Vías de Desarrollo en general, y en Latinoamérica en particular. El autor trata de cuantificar, en forma global, la repercusión de los materiales en varios supuestos y como ésta aumenta al disminuir —prácticamente desaparecer— las partidas de instalaciones y acabados. De conformidad...

  13. CO2 laser milling of hard tissue

    Science.gov (United States)

    Werner, Martin; Ivanenko, Mikhail; Harbecke, Daniela; Klasing, Manfred; Steigerwald, Hendrik; Hering, Peter

    2007-02-01

    Drilling of bone and tooth tissue belongs to recurrent medical procedures (screw- and pin-bores, bores for implant inserting, trepanation etc.). Small round bores can be in general quickly produced with mechanical drills. Problems arise however by angled drilling, by the necessity to fulfill the drilling without damaging of sensitive soft tissue beneath the bone, or by the attempt to mill precisely noncircular small cavities. We present investigations on laser hard tissue "milling", which can be advantageous for solving these problems. The "milling" is done with a CO2 laser (10.6 μm) with pulse duration of 50 - 100 μs, combined with a PC-controlled galvanic beam scanner and with a fine water-spray, which helps to avoid thermal side-effects. The damaging of underlying soft tissue can be prevented through control of the optical or acoustical ablation signal. The ablation of hard tissue is accompanied with a strong glowing, which is absent during the laser beam action on soft tissue. The acoustic signals from the diverse tissue types exhibit distinct differences in the spectral composition. Also computer image analysis could be a useful tool to control the operation. Laser "milling" of noncircular cavities with 1 - 4 mm width and about 10 mm depth is particularly interesting for dental implantology. In ex-vivo investigations we found conditions for fast laser "milling" of the cavities without thermal damage and with minimal tapering. It included exploration of different filling patterns (concentric rings, crosshatch, parallel lines and their combinations), definition of maximal pulse duration, repetition rate and laser power, optimal position of the spray. The optimized results give evidences for the applicability of the CO2 laser for biologically tolerable "milling" of deep cavities in the hard tissue.

  14. Predicting radon flux from uranium mill tailings

    International Nuclear Information System (INIS)

    Freeman, H.D.; Hartley, J.N.

    1983-11-01

    Pacific Northwest Laboratory (PNL), under contract to the US Department of Energy (DOE) Uranium Mill Tailings Remedial Action Project (UMTRAP) office, is developing technology for the design of radon barriers for uranium mill tailings piles. To properly design a radon cover for a particular tailings pile, the radon flux emanating from the bare tailings must be known. The tailings characteristics required to calculate the radon flux include radium-226 content, emanating power, bulk density, and radon diffusivity. This paper presents theoretical and practical aspects of estimating the radon flux from an uranium tailings pile. Results of field measurements to verify the calculation methodology are also discussed. 24 references, 4 figures, 4 tables

  15. Einstein-Yang-Mills-Lorentz black holes

    Energy Technology Data Exchange (ETDEWEB)

    Cembranos, Jose A.R.; Gigante Valcarcel, Jorge [Universidad Complutense de Madrid, Departamento de Fisica Teorica I, Madrid (Spain)

    2017-12-15

    Different black hole solutions of the coupled Einstein-Yang-Mills equations have been well known for a long time. They have attracted much attention from mathematicians and physicists since their discovery. In this work, we analyze black holes associated with the gauge Lorentz group. In particular, we study solutions which identify the gauge connection with the spin connection. This ansatz allows one to find exact solutions to the complete system of equations. By using this procedure, we show the equivalence between the Yang-Mills-Lorentz model in curved space-time and a particular set of extended gravitational theories. (orig.)

  16. Prototyping of Dental Structures Using Laser Milling

    Science.gov (United States)

    Andreev, A. O.; Kosenko, M. S.; Petrovskiy, V. N.; Mironov, V. D.

    2016-02-01

    The results of experimental studies of the effect of an ytterbium fiber laser radiation parameters on processing efficiency and quality of ZrO2 ceramics widely used in stomatology are presented. Laser operating conditions with optimum characteristics for obtaining high quality final surfaces and rapid material removal of dental structures are determined. The ability of forming thin-walled ceramic structures by laser milling technology (a minimum wall thickness of 50 μm) is demonstrated. The examples of three-dimensional dental structures created in computer 3D-models of human teeth using laser milling are shown.

  17. Gauged supersymmetries in Yang-Mills theory

    International Nuclear Information System (INIS)

    Tissier, Matthieu; Wschebor, Nicolas

    2009-01-01

    In this paper we show that Yang-Mills theory in the Curci-Ferrari-Delbourgo-Jarvis gauge admits some up to now unknown local linear Ward identities. These identities imply some nonrenormalization theorems with practical simplifications for perturbation theory. We show, in particular, that all renormalization factors can be extracted from two-point functions. The Ward identities are shown to be related to supergauge transformations in the superfield formalism for Yang-Mills theory. The case of nonzero Curci-Ferrari mass is also addressed.

  18. Automation for pilger mills at NZFP

    International Nuclear Information System (INIS)

    Manoher; Ramesh, K.; Rout, J.K.

    1997-01-01

    Pilgering is the critical operation in production of zircaloy fuel tubes. The in-going tube is required for feeding in pilgering and the outgoing pilger tube length is measured and is cut into required lengths and transferred to storage tank before sending for degreasing. The paper deals with the automation of the above operation carried out on the pilger mills of New Zircaloy Fabrication Plant (NZFP). This has helped in improving the quality of the pilgered tubes and productivity of the mill besides eliminating manual handling and cutting operations

  19. Operating System For Numerically Controlled Milling Machine

    Science.gov (United States)

    Ray, R. B.

    1992-01-01

    OPMILL program is operating system for Kearney and Trecker milling machine providing fast easy way to program manufacture of machine parts with IBM-compatible personal computer. Gives machinist "equation plotter" feature, which plots equations that define movements and converts equations to milling-machine-controlling program moving cutter along defined path. System includes tool-manager software handling up to 25 tools and automatically adjusts to account for each tool. Developed on IBM PS/2 computer running DOS 3.3 with 1 MB of random-access memory.

  20. Nonperturbative Results for Yang-Mills Theories

    DEFF Research Database (Denmark)

    Sannino, Francesco; Schechter, Joseph

    2010-01-01

    Some non perturbative aspects of the pure SU(3) Yang-Mills theory are investigated assuming a specific form of the beta function, based on a recent modification by Ryttov and Sannino of the known one for supersymmetric gauge theories. The characteristic feature is a pole at a particular value....... Assuming the usual QCD value one finds it to be 1.67 GeV, which is in surprisingly good agreement with a quenched lattice calculation. A similar calculation is made for the supersymmetric Yang-Mills theory where the corresponding beta function is considered to be exact....

  1. Barium Ferrite Ball Milled in Vacuum

    International Nuclear Information System (INIS)

    Campbell, S.J.; Wu, E.; Kaczmarek, W.A.; Wang, G.

    1998-01-01

    The structural and magnetic behaviour of BaFe 12 O 19 subjected to milling in vacuum for 1000 h has been investigated by x-ray powder diffraction and Moessbauer effect spectroscopy techniques. Pronounced structural disorder is obtained along with partial decomposition of BaFe 12 O 19 to α-Fe 2 O 3 and evidence for superparamagnetic relaxation effects due to the fine particles produced on milling. Restoration of the fully crystallised BaFe 12 O 19 structure on annealing at 1000 deg. C is accompanied by a six fold enhancement in the magnetic coercivity. This behaviour is linked with the fine crystallites

  2. Hollow Mill for Extraction of Stripped Titanium Screws: An Easy ...

    African Journals Online (AJOL)

    countries. The known alternative in such condition is ... Key words: Hollow mill, stripped screws, titanium locked plates ... used a locally manufactured stainless steel hollow mill, ... head ‑ plate hole” assembly as a mono‑block single unit. In.

  3. Electropolishing or chemical milling of beryllium to remove machining defects

    International Nuclear Information System (INIS)

    Helms, J.R.

    1975-12-01

    The techniques of electropolishing and chemical milling to remove machine damage from beryllium are compared. Both techniques are found to be effective; chemical milling is recommended because it is easier to use and control

  4. Parametric optimization of CNC end milling using entropy ...

    African Journals Online (AJOL)

    Parametric optimization of CNC end milling using entropy measurement technique combined with grey-Taguchi method. ... International Journal of Engineering, Science and Technology ... Keywords: CNC end milling, surface finish, material removal rate (MRR), entropy measurement technique, Taguchi method ...

  5. Investigation of the milling capabilities of the F10 Fine Grind mill using Box-Behnken designs.

    Science.gov (United States)

    Tan, Bernice Mei Jin; Tay, Justin Yong Soon; Wong, Poh Mun; Chan, Lai Wah; Heng, Paul Wan Sia

    2015-01-01

    Size reduction or milling of the active is often the first processing step in the design of a dosage form. The ability of a mill to convert coarse crystals into the target size and size distribution efficiently is highly desirable as the quality of the final pharmaceutical product after processing is often still dependent on the dimensional attributes of its component constituents. The F10 Fine Grind mill is a mechanical impact mill designed to produce unimodal mid-size particles by utilizing a single-pass two-stage size reduction process for fine grinding of raw materials needed in secondary processing. Box-Behnken designs were used to investigate the effects of various mill variables (impeller, blower and feeder speeds and screen aperture size) on the milling of coarse crystals. Response variables included the particle size parameters (D10, D50 and D90), span and milling rate. Milled particles in the size range of 5-200 μm, with D50 ranging from 15 to 60 μm, were produced. The impeller and feeder speeds were the most critical factors influencing the particle size and milling rate, respectively. Size distributions of milled particles were better described by their goodness-of-fit to a log-normal distribution (i.e. unimodality) rather than span. Milled particles with symmetrical unimodal distributions were obtained when the screen aperture size was close to the median diameter of coarse particles employed. The capacity for high throughput milling of particles to a mid-size range, which is intermediate between conventional mechanical impact mills and air jet mills, was demonstrated in the F10 mill. Prediction models from the Box-Behnken designs will aid in providing a better guide to the milling process and milled product characteristics. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Mill Designed Bio bleaching Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Institute of Paper Science Technology

    2004-01-30

    generation of laccase has a broad spectrum of operating parameters. Nonetheless, the development of future genetically engineered laccases with enhanced temperature, pH and redox potentials will dramatically improve the overall process. A second challenge for LMS bleaching technologies is the need to develop effective, catalytic mediators. From the literature we already know this is feasible since ABTS and some inorganic mediators are catalytic. Unfortunately, the mediators that exhibit catalytic properties do not exhibit significant delignification properties and this is a challenge for future research studies. Potential short-term mill application of laccase has been recently reported by Felby132 and Chandra133 as they have demonstrated that the physical properties of linerboard can be improved when exposed to laccase without a chemical mediator. In addition, xxx has shown that the addition of laccase to the whitewater of the paper machine has several benefits for the removal of colloidal materials. Finally, this research program has presented important features on the delignification chemistry of LMS{sub NHA} and LMS{sub VA} that, in the opinion of the author, are momentous contributions to the overall LMS chemistry/biochemistry knowledge base which will continue to have future benefits.

  7. Machinability Evaluation in Hard Milling of AISI D2 Steel

    OpenAIRE

    Gaitonde, Vinayak Neelakanth; Karnik, Sulse Ramesh; Maciel, Caio Henrique Alves; Rubio, Juan Carlos Campos; Abrão, Alexandre Mendes

    2016-01-01

    Milling of hardened steel components provides considerable benefits in terms of reduced manufacturing cost and time compared to traditional machining. Temperature variation in milling is an important factor affecting the wear of cutting tools. The poor selection of milling parameters may cause excessive tool wear and increased work surface roughness. Hence, there is a need to study the machinability aspects during milling of hardened steel components. In the present work, influence of cutting...

  8. Management of wastes from uranium mines and mills

    International Nuclear Information System (INIS)

    Thomas, K.T.

    1981-01-01

    Uranium mining and milling operations have not given rise to much concern about their hazards, and with advancing technologies for mill processing and waste management, the situation will continue to improve. However, the disposal of large quantities of waste produced in mining and milling does have an environmental impact, owing to the long half-lives and the ready availability of the toxic radionuclides Ra-226 and Rn-222. This article deals with the management of wastes from uranium mines and mills

  9. Restos de vida en Bajo este sol tremendo de Carlos Busqued

    Directory of Open Access Journals (Sweden)

    Marcos Seifert

    2017-07-01

    Full Text Available Este trabajo se propone analizar cómo la novela de Carlos Busqued Bajo este sol tremendo (2009 se apoya en la representación de vidas desechadas, basura y todo tipo de restos para instalarse en una tensión entre orden y exceso. La narración plantea una lógica en la que la basura, en lugar de constituirse en un indicio que posibilite la reconstrucción del paisaje social, exhibe lo desbordante, lo inasimilable y los vacíos de sentido. En el mundo que nos presenta Busqued lo viviente se vuelve resto en la medida en que encarna una heterogeneidad irreductible a cualquier estructura social y productiva. This paper analyzes the way in which Carlos Busqued's novel Bajo este sol tremendo (2009 is based on the representation of discarded lives, garbage, and all kinds of remains and thus proposes a tension between order and excess. The narration raises a logic in which garbage, instead of constituting an indicator that allows for the reconstruction of the social landscape, exhibits the overflowing, the unassimilable, and the voids of meaning. In the world that Busqued presents, the living becomes a remainder because it embodies an irreducible heterogeneity with regards to any social and productive structure.

  10. Materiales, tecnologías y prototipos de viviendas de muy bajo coste

    Directory of Open Access Journals (Sweden)

    Salas Serrano, Julián

    1982-11-01

    Full Text Available Not available.El fin último de la investigación es el de conseguir unas tipologías de viviendas realizadas mediante materiales, procedimientos o sistemas constructivos que permitan proporcionar un producto final, cuyas características fundamentales sean: adecuación a las necesidades físicas y socioculturales de la zona y, prioritariamente, la consecución de un muy bajo coste da ejecución de las mismas. Cuando se habla a continuación de «viviendas de muy bajo coste» se debe entender que nos referimos a las que cumplen básicamente las dos condiciones limitativas aceptadas por las Naciones Unidas (UNCHSHABITAT: a Superficie construida comprendida entre 30 y 50 m2. b Coste de construcción inferior a los 100 $ USA (1982 por metro cuadrado construido. (Para nuestras condiciones, fijaríamos un coste aproximado de 10.000 pts/m2.

  11. Algunas variables bioquímicas en adolescentes obesos con antecedente de bajo peso al nacer

    Directory of Open Access Journals (Sweden)

    María del Carmen Valdés Alonso

    Full Text Available Introducción: la malnutrición intraútero ha sido postulada con vinculación a afecciones del desarrollo embrionario que determinan el desarrollo ulterior de obesidad, diabetes mellitus tipo 2, dislipidemias, disfunción mitocondrial y aterosclerosis. Objetivo: determinar las complicaciones metabólicas en adolescentes obesos con antecedentes de bajo peso al nacer. Métodos: estudio descriptivo y de corte transversal. Se incluyeron 50 pacientes obesos, con antecedentes de bajo peso al nacer y embarazo a término, de ambos sexos, en las edades comprendidas entre 9 y 17 años de edad, que asistieron a la consulta externa del servicio de Endocrinología del Hospital Pediátrico Docente "Juan Manuel Márquez", en el período comprendido de enero de 2011 a enero de 2012. Se realizaron determinaciones de colesterol, triglicéridos, aminotransferasas hepáticas, glucemia, e insulinemia en ayunas y posprandial de dos horas. Resultados: las variables bioquímicas estudiadas no mostraron diferencias entre los puntos de corte utilizados para clasificar el peso al nacer. La transaminasa glutámico pirúvica mostró valores más altos en los adolescentes entre 15 y 17 años de edad. Conclusiones: la hipertrigliceridemia fue más elevada en el sexo femenino, mientras que la hiperglucemia y la hiperinsulinemia lo fueron en el masculino.

  12. Glosa paseada bajo el fuego y la lluvia: cinco lentes para mirar el Chocó

    Directory of Open Access Journals (Sweden)

    Mónica María del Valle Idárraga

    2011-12-01

    Full Text Available A partir de la perspectiva general de la ecocrítica o ecopoética, este artículo analiza los modos como se representa la naturaleza y su relación con lo humano en la obra Glosa paseada bajo el fuego y la lluvia (1982 del escritor chocoano Carlos Arturo Caicedo Licona. Las cinco instancias de esa figuración que aquí se estudian ayudan a crear un universo simbólico que respalda una idea de chocoanidad cifrada en prácticas, creencias, recorridos y visiones desde un marco anterior a tecnologías de la identidad como la biodiversidad o la patrimonialización.Based on the general premises of Ecocriticism, this article explores the ways in which nature and its inter-relation to human beings is created in Glosa paseada bajo el fuego y la lluvia, a work by Carlos Arturo Caicedo Licona, a writer from Chocó, Colombia. Five instances of that representation are analyzed as pieces that, while describing practices, conceptions, beliefs and cartographic descriptions, structure an idea of Chocoan identity previous to current identity technologies, such as patrimonialization and biodiversity.

  13. THE CONSTRUCTION AND CONTESTATION OF ISLAMIC IDENTITY OF THE BAJO PEOPLE IN WAKATOBI ISLANDS, SOUTH EAST SULAWESI, INDONESIA

    Directory of Open Access Journals (Sweden)

    Benny Baskara

    2014-02-01

    Full Text Available On the one one hand, the Bajo people are well-known as ‘the sea people’ who have their own indigenous belief system – belief in the Lord of the Sea. On the other hand, they also acknowledge themselves as Muslims. Thus, the religious identity of the Bajo people reflects a unique combination of Islamic teachings and their indigenous beliefs. This unique combination is not only expressed in their religious life, in their rituals and worship practices, but also in the values found in their customary practices (adat as a guiding system for their life. This paper examines the construction and contestation of the religious identity of the Bajo people, especially how they construct their identities in relation to their natural, social, and religious environments. The contestation of the Bajo religious identity covers three aspects: the contestation of the Islam of ‘the sea people’ against the Islam of ‘the land people’, the contenstation of the ‘official’ Islam against the ‘traditional’ Islam, and the challenges of modernity, especially the commodification of the Bajo religious expressions. This contestation, in turn, reconstructs their religious identity into a more adaptive one.

  14. 46 CFR 50.25-3 - Manufacturer or mill certification.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Manufacturer or mill certification. 50.25-3 Section 50... PROVISIONS Acceptance of Material and Piping Components § 50.25-3 Manufacturer or mill certification. (a) A manufacturer or mill producing materials used in certain products for installation on inspected vessels, shall...

  15. ROMI 4.0: Updated Rough Mill Simulator

    Science.gov (United States)

    Timo Grueneberg; R. Edward Thomas; Urs Buehlmann

    2012-01-01

    In the secondary hardwood industry, rough mills convert hardwood lumber into dimension parts for furniture, cabinets, and other wood products. ROMI 4.0, the US Department of Agriculture Forest Service's ROugh-MIll simulator, is a software package designed to simulate the cut-up of hardwood lumber in rough mills in such a way that a maximum possible component yield...

  16. 78 FR 31315 - Kraft Pulp Mills NSPS Review

    Science.gov (United States)

    2013-05-23

    ... Kraft Pulp Mills NSPS Review; Proposed Rule #0;#0;Federal Register / Vol. 78 , No. 100 / Thursday, May...-OAR-2012-0640; FRL-9815-9] RIN 2060-AR64 Kraft Pulp Mills NSPS Review AGENCY: Environmental Protection... performance standards for kraft pulp mills. These revised standards include particulate matter emission limits...

  17. 7 CFR 58.419 - Curd mill and miscellaneous equipment.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Curd mill and miscellaneous equipment. 58.419 Section... Service 1 Equipment and Utensils § 58.419 Curd mill and miscellaneous equipment. Knives, hand rakes... of the curd mill should be of stainless steel. All pieces of equipment shall be so constructed that...

  18. 7 CFR 868.301 - Definition of milled rice.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Definition of milled rice. 868.301 Section 868.301... FOR CERTAIN AGRICULTURAL COMMODITIES United States Standards for Milled Rice Terms Defined § 868.301 Definition of milled rice. Whole or broken kernels of rice (Oryza sativa L.) from which the hulls and at...

  19. Texture formation in iron particles using mechanical milling with graphite as a milling aid

    Energy Technology Data Exchange (ETDEWEB)

    Motozuka, S.; Hayashi, K. [Department of Mechanical Engineering, Gifu National College of Technology, 2236-2 Kamimakuwa, Motosu, Gifu 501-0495 (Japan); Tagaya, M. [Department of Materials Science and Technology, Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka, Niigata 940-2188 (Japan); Morinaga, M. [Toyota Physical and Chemical Research Institute, 41-1, Yokomichi, Nagakute, Aichi 480-1192 (Japan)

    2015-09-15

    Crystallographically anisotropic platelet iron particles were successfully prepared using a conventional ball mill with addition of graphite (Gp) particles. The morphological and structural changes resulting from the milling were investigated using scanning electron microscopy and X-ray diffraction. The spherical iron particles were plastically deformed into platelet shapes during the milling. Simultaneously, it is suggested that the size of the Gp particles decreased and adhered as nanoparticles on the surface of the iron particles. The adhered Gp particles affected the plastic deformation behavior of the iron particles: the (001) planes of α-iron were oriented parallel to the particle face, and no preferred in-plane orientation was observed. This study not only details the preparation of soft magnetic metal particles that crystallographically oriented to enhance their magnetic properties but also provides new insight into the activities of the well-established and extensively studied mechanical milling method.

  20. Texture formation in iron particles using mechanical milling with graphite as a milling aid

    International Nuclear Information System (INIS)

    Motozuka, S.; Hayashi, K.; Tagaya, M.; Morinaga, M.

    2015-01-01

    Crystallographically anisotropic platelet iron particles were successfully prepared using a conventional ball mill with addition of graphite (Gp) particles. The morphological and structural changes resulting from the milling were investigated using scanning electron microscopy and X-ray diffraction. The spherical iron particles were plastically deformed into platelet shapes during the milling. Simultaneously, it is suggested that the size of the Gp particles decreased and adhered as nanoparticles on the surface of the iron particles. The adhered Gp particles affected the plastic deformation behavior of the iron particles: the (001) planes of α-iron were oriented parallel to the particle face, and no preferred in-plane orientation was observed. This study not only details the preparation of soft magnetic metal particles that crystallographically oriented to enhance their magnetic properties but also provides new insight into the activities of the well-established and extensively studied mechanical milling method

  1. Purchases of Degrees from Diploma Mills.

    Science.gov (United States)

    Cramer, Robert J.

    In response to a request from the Permanent Subcommittee on Investigations of the Senate Committee on Governmental Affairs, the General Accounting Office (GAO) investigated issues concerning the proliferation of "diploma mills," which sell bogus academic degrees based on "life experience" or substandard or negligible work.…

  2. CVD carbon powders modified by ball milling

    Directory of Open Access Journals (Sweden)

    Kazmierczak Tomasz

    2015-09-01

    Full Text Available Carbon powders produced using a plasma assisted chemical vapor deposition (CVD methods are an interesting subject of research. One of the most interesting methods of synthesizing these powders is using radio frequency plasma. This method, originally used in deposition of carbon films containing different sp2/sp3 ratios, also makes possible to produce carbon structures in the form of powder. Results of research related to the mechanical modification of these powders have been presented. The powders were modified using a planetary ball mill with varying parameters, such as milling speed, time, ball/powder mass ratio and additional liquids. Changes in morphology and particle sizes were measured using scanning electron microscopy and dynamic light scattering. Phase composition was analyzed using Raman spectroscopy. The influence of individual parameters on the modification outcome was estimated using statistical method. The research proved that the size of obtained powders is mostly influenced by the milling speed and the amount of balls. Powders tend to form conglomerates sized up to hundreds of micrometers. Additionally, it is possible to obtain nanopowders with the size around 100 nm. Furthermore, application of additional liquid, i.e. water in the process reduces the graphitization of the powder, which takes place during dry milling.

  3. Radiosensitivity of quince seeds (Cydonia oblonga Mill.)

    International Nuclear Information System (INIS)

    Dall'Orto, F.A.C.; Ojima, M.; Hiroce, R.; Igue, T.; Ferraz, E.S.B.; Nascimento Filho, V.F. do; Menten, J.O.M.; Tulmann Neto, A.; Ando, A.

    1984-01-01

    The investigation with quince seeds (Cydonia oblonga Mill.) radiosensitivity and the mineral composition of the plants obtained for mutation breeding are related. The concentration of some macro and micronutrients in quince seedlings obtained from irradiated seeds are studied. (M.A.C.) [pt

  4. Yang-Mills formulation of interacting strings

    International Nuclear Information System (INIS)

    Chan Hongmo; Tsou Sheungtsun

    1988-06-01

    A suggestion that the theory of interacting open bosonic string be reformulated as a generalised Yang-Mills theory is further elucidated. Moreover, a serious reservation regarding the ordering of operators in the earlier 'proof' of equivalence between the new and standard formulations is now removed. (author)

  5. Credentialism: Why We Have Diploma Mills.

    Science.gov (United States)

    Arnstein, George

    1982-01-01

    The demand for credentials and college degrees in the United States has spawned the establishment of many degree-granting institutions that are nothing more than diploma mills. Despite some indicators of institutional quality, such as accreditation and state licensing, the identification of substandard colleges is not always an easy task. (WD)

  6. Uranium mill tailings and risk estimation

    International Nuclear Information System (INIS)

    Marks, S.

    1984-04-01

    Work done in estimating projected health effects for persons exposed to mill tailings at vicinity properties is described. The effect of the reassessment of exposures at Hiroshima and Nagasaki on the risk estimates for gamma radiation is discussed. A presentation of current results in the epidemiological study of Hanford workers is included. 2 references

  7. Unique specification of Yang-Mills solutions

    International Nuclear Information System (INIS)

    Campbell, W.B.; Joseph, D.W.; Morgan, T.A.

    1980-01-01

    Screened time-independent cylindrically-symmetric solutions of Yang-Mills equations are given which show that the source does not uniquely determine the field. However, these particular solutions suggest a natural way of uniquely specifying solutions in terms of a physical realization of a symmetry group. (orig.)

  8. Species status of Mill Creek Elliptio

    Energy Technology Data Exchange (ETDEWEB)

    Davis, G.M. [Academy of Natural Sciences (United States); Mulvey, M. [Savannah River Ecology Lab., Aiken, SC (United States)

    1993-12-31

    This report discusses environmental effects of the Savannah River Plant on aqautic populations in Mill Creek and surrounding tributaries. Of particular concern was the status of Elliptio. Genetics and phenotypic characteristics have shown that the current classification system is not adequate for these populations. The appendices characterize genetic variability at different loci, electrophoretic data, allele frequencies, sympatric species, and anatomical characters.

  9. Lucky Mc Uranium Mill. Draft environmental statement

    International Nuclear Information System (INIS)

    1977-06-01

    The Environmental Impact Statement addressed the following: the existing environment; operations; environmental impacts; environmental effects of accidents; monitoring programs and other mitigating measures; unavoidable adverse environmental impacts; relationship between short-term uses of the environment and long-term productivity; irreversible and irretrievable commitments of resources; alternatives; and NRC benefit-cost summary for the Lucky Mc Mill

  10. Random geometry and Yang-Mills theory

    International Nuclear Information System (INIS)

    Froehlich, J.

    1981-01-01

    The author states various problems and discusses a very few preliminary rigorous results in a branch of mathematics and mathematical physics which one might call random (or stochastic) geometry. Furthermore, he points out why random geometry is important in the quantization of Yang-Mills theory. (Auth.)

  11. Understanding milling induced changes: Some results

    Indian Academy of Sciences (India)

    Unknown

    simple model systems. ... times in a planetary mill are shown in figure 2. ... dynamics (CD) model, based on Martin's model for driven systems,21 along with an ... feature of the phase diagram is the self closing miscibility gap at low temperature.

  12. Understanding Biomass Ignition in Power Plant Mills

    DEFF Research Database (Denmark)

    Schwarzer, Lars; Jensen, Peter Arendt; Glarborg, Peter

    2017-01-01

    Converting existing coal fired power plants to biomass is a readily implemented strategy to increase the share of renewable energy. However, changing from one fuel to another is not straightforward: Experience shows that wood pellets ignite more readily than coal in power plant mills or storages...

  13. Cuttable Ruled Surface Strips for Milling

    DEFF Research Database (Denmark)

    Steenstrup, Kasper Hornbak; Nørbjerg, Toke Bjerge; Søndergaard, Asbjørn

    2016-01-01

    This paper proposes a novel pre-processing method for industrial robotic CNC-milling. The method targets a hybrid machining process, in which the main bulk of material is removed through robotic hot or abrasive wire cutting, after which regular CNC-machining is employed for removal of the remaining...

  14. On the bistable zone of milling processes.

    Science.gov (United States)

    Dombovari, Zoltan; Stepan, Gabor

    2015-09-28

    A modal-based model of milling machine tools subjected to time-periodic nonlinear cutting forces is introduced. The model describes the phenomenon of bistability for certain cutting parameters. In engineering, these parameter domains are referred to as unsafe zones, where steady-state milling may switch to chatter for certain perturbations. In mathematical terms, these are the parameter domains where the periodic solution of the corresponding nonlinear, time-periodic delay differential equation is linearly stable, but its domain of attraction is limited due to the existence of an unstable quasi-periodic solution emerging from a secondary Hopf bifurcation. A semi-numerical method is presented to identify the borders of these bistable zones by tracking the motion of the milling tool edges as they might leave the surface of the workpiece during the cutting operation. This requires the tracking of unstable quasi-periodic solutions and the checking of their grazing to a time-periodic switching surface in the infinite-dimensional phase space. As the parameters of the linear structural behaviour of the tool/machine tool system can be obtained by means of standard modal testing, the developed numerical algorithm provides efficient support for the design of milling processes with quick estimates of those parameter domains where chatter can still appear in spite of setting the parameters into linearly stable domains. © 2015 The Authors.

  15. VENVAL : a plywood mill cost accounting program

    Science.gov (United States)

    Henry Spelter

    1991-01-01

    This report documents a package of computer programs called VENVAL. These programs prepare plywood mill data for a linear programming (LP) model that, in turn, calculates the optimum mix of products to make, given a set of technologies and market prices. (The software to solve a linear program is not provided and must be obtained separately.) Linear programming finds...

  16. A class of Yang-Mills solutions

    International Nuclear Information System (INIS)

    Castillejo, L.; Kugler, M.

    1980-09-01

    We investigate a class of solutions of the classical SU(2) Yang-Mills equations. The symmetry of this class prescribes a natural set of gauge invariant degrees of freedom. Using these degrees of freedom we obtain a simple set of equations which enables us to find all the solutions belonging to the class under discussion. (Author)

  17. Buffalo calves intoxicated with Ageratum houstonianum mill

    Science.gov (United States)

    Ageratum houstonianum Mill, a noxious weed has been reported to contain pyrrolizidine alkaloids, saponins, triterpens and coumarin. It is an invasive weed that is commonly found in the pasturelands of tropical and subtropical regions. The objectives of this work were to verify the toxicity of A. ho...

  18. The progress in the researches for uranium mill tailings cleaning treatment and no-waste uranium ore milling processes

    International Nuclear Information System (INIS)

    Wang Jintang

    1990-01-01

    The production of uranium mill tailings and their risk assessment are described. The moethods of uranium mill tailings disposal and management are criticized and the necessity of the researches for uranium mill tailings cleaning treatment and no-wasle uranium ore milling process are demonstrated. The progress for these researches in China and other countries with uranium production is reviewed, and the corresponding conclusions are reported

  19. Surface Quality of Staggered PCD End Mill in Milling of Carbon Fiber Reinforced Plastics

    Directory of Open Access Journals (Sweden)

    Guangjun Liu

    2017-02-01

    Full Text Available Machined surface quality determines the reliability, wear resistance and service life of carbon fiber reinforced plastic (CFRP workpieces. In this work, the formation mechanism of the surface topography and the machining defects of CFRPs are proposed, and the influence of milling parameters and fiber cutting angles on the surface quality of CFRPs is obtained, which can provide a reference for extended tool life and good surface quality. Trimming and slot milling tests of unidirectional CFRP laminates are performed. The surface roughness of the machined surface is measured, and the influence of milling parameters on the surface roughness is analyzed. A regression model for the surface roughness of CFRP milling is established. A significance test of the regression model is conducted. The machined surface topography of milling CFRP unidirectional laminates with different fiber orientations is analyzed, and the effect of fiber cutting angle on the surface topography of the machined surface is presented by using a digital super depth-of-field microscope and scanning electron microscope (SEM. To study the influence of fiber cutting angle on machining defects, the machined topography under different fiber orientations is analyzed. The slot milling defects and their formation mechanism under different fiber cutting angles are investigated.

  20. Autoestima en adolescentes con bajo rendimiento escolar a través del psicodiagnóstico de Rorschach

    Directory of Open Access Journals (Sweden)

    Magally de Garrido-Lecca

    1997-12-01

    Full Text Available El objetivo fue determinar si existen diferencias en la autoestima de adolescentes con bajo rendimiento escolar comparados con los de un rendimiento promedio o superior. Los participantes fueron 60 adolescentes, entre 13 y 16 años, de ambos sexos, con un C.I. promedio o superior al promedio, de los cuales 30 presentaban un bajo rendimiento escolar  (grupo de estudio y 30 un buen rendimiento (grupo contraste. Se administró el WISCR para determinar el C.I. y el Rorschach según el SC de Exner para evaluar la autoestima. Los resultados mostraron que el Rorschach es adecuado para evaluar la autoestima. Asimismo existe una diferencia significativa en la autoestima de adolescentes con bajo rendimiento como resultado de sus déficits afectivos, en comparación con los de alto rendimiento.

  1. Yang-Mills theory for non-semisimple groups

    CERN Document Server

    Nuyts, J; Nuyts, Jean; Wu, Tai Tsun

    2003-01-01

    For semisimple groups, possibly multiplied by U(1)'s, the number of Yang-Mills gauge fields is equal to the number of generators of the group. In this paper, it is shown that, for non-semisimple groups, the number of Yang-Mills fields can be larger. These additional Yang-Mills fields are not irrelevant because they appear in the gauge transformations of the original Yang-Mills fields. Such non-semisimple Yang-Mills theories may lead to physical consequences worth studying. The non-semisimple group with only two generators that do not commute is studied in detail.

  2. Uranium mill tailings management practices in Saskatchewan, Canada

    International Nuclear Information System (INIS)

    Clifton, A.W.; Barsi, R.G.; Melis, L.A.

    1984-01-01

    Uranium was discovered in Saskatchewan in 1934. The first major mill began operating at Beaverlodge in 1953; two other mills began production in the same area in 1955 and 1957. Waste management measures were limited at the early mills. A new generation of mills was brought into production beginning in 1975 utilizing engineered waste management systems. The paper presents a brief description of the geography and physical environment of northern Saskatchewan, Canada; reviews milling operations and waste managements systems; describes the evolution of waste management systems; and, comments on environmental control measures regulating the industry

  3. Importancia de los antecedentes maternos en el recién nacido bajo peso

    Directory of Open Access Journals (Sweden)

    Gil Vicente Sarmiento Brooks

    2000-10-01

    Full Text Available Se realizó un estudio observacional, analítico, con un modelo de diseño del tipo casos y controles en 117 mujeres del Policlínico Docente "La Rampa" perteneciente al municipio Plaza de la Revolución de las cuales 17 tuvieron un recién nacido con un peso inferior a los 2 500 g. Las restantes 100 mujeres lograron niños con un peso igual al anteriormente señalado o superior. Analizamos la influencia de algunos antecedentes como el orden de nacimientos y de embarazos, el número de abortos y las gestaciones de bajo peso anteriores y determinados antecedentes patológicos de la madre. Se concluyó que los factores que influyen en el nacimiento de un niño con bajo peso son, entre otros: que sea el primer nacimiento (RR = 2; el primer embarazo (RR = 1,8; el haber tenido 2 o más abortos previos (RR = 4,9, el antecedente de haber tenido uno o más recién nacido de bajo peso (RNBP (RR = 6,9 y ciertas enfermedades maternas como la urosepsis (RR = 3,7, la hipertensión crónica (RR = 3,21, la anemia (RR = 2,7 y el asma (RR = 1,9. Se hacen algunas recomendacionesAn observational and analytical case-control study was conducted among 117 women attended at "La Rampa" Teaching Polyclinic, in the municipality of Plaza de la Revolución. 17 of these women had a newborn infant with a birth weight under 2 500 g. The rest of them had children with the same weight or higher. The influence of some history as the order of births and pregnancies, the number of abortions and the previous low weight gestations and certain pathological history of the mother were analyzed. It was concluded that the factors that influenced on the birth of a low birth weight infant are, among others: the first birth (RR=2, the first pregnancy (RR=1,8; having had 2 or more previous abortions (RR=4,9, having had one or more low birth weight infants (RR=6,9, and some maternal diseases as urosepsis (RR=3,7, chronic hypertension (RR=3,21, anemia (RR=2,7 and asthma (RR=1,9

  4. Situación General de la Industria de la Construcción de Bajo Bordo

    OpenAIRE

    Chui, Alexander; Gamero, Magali; Cornejo, Karla; Rios, Vanessa; Valdivia, Maria Laura; Benzaquén de las Casas, Jorge

    2016-01-01

    Objetivo: Determinar las condiciones en que se encuentra la industria de construcción naval de bajo bordo en el Perú, relacionado con su contexto latinoamericano. Métodos: Se estableció un protocolo de actuación a base entrevistas, cuestionarios y recopilación de datos con el fin de conocer los principales indicadores de la dinámica funcional e industria de construcción naval de bajo bordo. Resultados: El Perú ha crecido notablemente en las últimas dos décadas como consecuencia de la apertura...

  5. Comportamiento Tribológico de Aluminio Sinterizado y Desgastado Bajo Distintas Condiciones Comportamiento Tribológico de Aluminio Sinterizado y Desgastado Bajo Distintas Condiciones

    Directory of Open Access Journals (Sweden)

    Veridiana Reyes Z.

    2012-02-01

    Full Text Available Wear is one of the most costly damages in industry and research has been directed towards its prevention. This paper deals with the behavior of aluminum pieces, prepared by powder metallurgy, under wear. The samples tested were prepared under different processing conditions (compacting pressure, temperature and sintering time. The wear test was carried out ina pin-in-disc machine, at various rates and wear pressures. The results showed the tribological behavior of aluminum. Also, a comparative study between a 356-aluminium alloy and pure aluminum was carried out, showing the feasibility of attaining similar tribological behavior between a conventional alloy and pure aluminum prepared by powder metallurgy techniques.El desgaste es uno de los daños más costosos para la industria y las investigaciones buscan entender los mecanismos del desgaste que podrían disminuirlo o evitarlo. Este trabajo analiza el comportamiento del aluminio obtenido por metalurgia de polvos cuando se somete a desgaste. Las muestras usadas fueron preparadas bajo diversas condiciones de proceso (presión de la compactación, la temperatura y tiempode tratamiento térmico. Las pruebas de desgaste se realizaron en una máquina de pin-en-disco y fueron probados diferentes valores de velocidad y presión de desgaste. Los resultados obtenidos muestran el comportamiento tribológico del aluminio. Se presenta también un estudio comparativo entre una aleación de aluminio 356 y aluminio puro, demostrándose la viabilidad de lograr un comportamiento tribológico similar entre esta aleación convencional y el aluminio puro preparado por metalurgia de polvos.

  6. Loop quantum corrected Einstein Yang-Mills black holes

    Science.gov (United States)

    Protter, Mason; DeBenedictis, Andrew

    2018-05-01

    In this paper, we study the homogeneous interiors of black holes possessing SU(2) Yang-Mills fields subject to corrections inspired by loop quantum gravity. The systems studied possess both magnetic and induced electric Yang-Mills fields. We consider the system of equations both with and without Wilson loop corrections to the Yang-Mills potential. The structure of the Yang-Mills Hamiltonian, along with the restriction to homogeneity, allows for an anomaly-free effective quantization. In particular, we study the bounce which replaces the classical singularity and the behavior of the Yang-Mills fields in the quantum corrected interior, which possesses topology R ×S2 . Beyond the bounce, the magnitude of the Yang-Mills electric field asymptotically grows monotonically. This results in an ever-expanding R sector even though the two-sphere volume is asymptotically constant. The results are similar with and without Wilson loop corrections on the Yang-Mills potential.

  7. Sobre la toma de decisiones económicas bajo incertidumbre

    Directory of Open Access Journals (Sweden)

    Aurora García Gallego

    2012-04-01

    Full Text Available En este artículo resumimos la evolución de la Teoría Económica sobre la toma de decisiones bajo incertidumbre. Tras una breve introducción a la teoría de la Utilidad Esperada, nos referimos a comportamientos paradójicos que obligaron a los economistas a adoptar teorías menos simplistas que permitieran explicar un mayor abanico de fenómenos. La mayor complejidad conlleva una descripción multidimensional de las actitudes humanas frente al riesgo económico. Sin embargo, las mediciones de la actitud frente al riesgo utilizadas por los economistas continúan siendo, en su mayoría, unidimensionales.

  8. Vernacular modernism and melodramatic imagination in Bajo el cielo antioqueño

    Directory of Open Access Journals (Sweden)

    Álvaro Andrés Villegas

    2016-12-01

    Full Text Available This article focuses on the film “Bajo el cielo antioqueño”, directed by Arturo Acevedo Vallarino and released in 1925. First, the collective efforts of the Medellin privileged sectors are described, which participated as investors and as actors. Then, the movie’s appropriation of what could be called the “vernacular modernism” is analyzed through the cultural matrix of melodrama, which is characterized by intensity and schematization of feelings, by the story’s development from ignorance to recognition, the supremacy of family relationships and essential loyalties, as well as by the expression of emotional excess. Finally, the acceptance of the movie by the audience, which was characterized by the consensus towards the regional representation shown in the movie, will be commented on.

  9. Desarrollo postembrionario de Ronderosia bergi (Orthoptera: Acrididae: Melanoplinae bajo condiciones controladas

    Directory of Open Access Journals (Sweden)

    Yanina MARIOTTINI

    2006-01-01

    Full Text Available Mediante el seguimiento de cohortes correspondientes a la primera generación de bioterio, provenientes de ejemplares capturados en el sudeste de la provincia de San Luis, se registraron algunos parámetros biológicos fundamentales del acridio Ronderosia bergi (Stål bajo condiciones controladas (30°C, 40% HR; 14hs. luz, 10 hs. oscuridad. La duración total del desarrollo postembrionario fue de 213 días, de los cuales 30 correspondieron a los cinco estadios del desarrollo ninfal. El número promedio de huevos por postura fue de 16,8, y la madurez sexual fue alcanzada dentro de los 4-5 días después del ingreso a imago. Las diferencias con los escasos datos provenientes de estudios previos, obedecerían a las distintas condiciones de crianza o a una alta variabilidad intraespecífica.

  10. Bajo peso al nacer y su implicación en el desarrollo psicomotor

    Directory of Open Access Journals (Sweden)

    Doris Amparo Parada-Rico

    2015-12-01

    Full Text Available Los niños que al nacer presentan peso bajo, pueden desarrollar graves problemas de salud, así mismo, el riesgo de sufrir problemas e incapacidades en su desarrollo psicomotor a largo plazo es mayor. En la revisión en bases de datos científicas, se identifica como un problema de salud a escala mundial, puesto que estos recién nacidos pueden tener serias limitaciones en su supervivencia y posteriormente en su calidad de vida; por ende, se debe evaluar minuciosamente su desarrollo psicomotor, de manera que se asegure la detección temprana de factores de riesgo susceptibles a intervenciones de cuidado.

  11. Comportamiento del fruto de uchuva Physalis peruviana L., bajo diferentes temperaturas de almacenamiento

    Directory of Open Access Journals (Sweden)

    Elberth Hernando Pinzón

    2015-12-01

    Full Text Available El fruto de la uchuva Physalis peruviana L. es muy apetecido en los mercados internacionales, por sus características nutracéuticas; sin embargo, por ser un fruto climatérico, los procesos de maduración se dan de forma acelerada disminuyendo considerablemente su vida poscosecha. Teniendo en cuenta lo anterior se han desarrollado diferentes técnicas que permiten desacelerar los procesos normales de maduración, entre las que se encuentran, la modificación de atmósferas o el almacenamiento a diferentes temperaturas, siendo éste último, muy utilizado por la facilidad de manejo y bajo costo. Por lo anterior, se evaluó el comportamiento del fruto de uchuva ecotipo Colombia sometido a diferentes temperaturas de almacenamiento, a los que se les evaluó la pérdida de masa fresca, índice de color, firmeza, sólidos solubles totales y acidez total. Se presentaron diferencias significativas para todas las variables evaluadas entre los tratamientos bajo refrigeración y el testigo. La temperatura de almacenamiento, influyó sobre todas las características físicas y químicas evaluadas de manera satisfactoria, ya que luego de 18 días después de almacenamiento los frutos refrigerados conservaron su calidad, siendo favorable para su comercialización; sin embargo, se espera en estudios futuros realizar pruebas de vida en anaquel que permitan descartar fisiopatías que afecten la presentación del producto así como su consumo.

  12. New data about the archaeological area of Marroquíes Bajos: the fifth ditch

    Directory of Open Access Journals (Sweden)

    Sánchez, Alberto

    2005-12-01

    Full Text Available The present paper presents the results that were obtained in the excavation carried out in the plot DOC-1 (SUNP-1 in the Archaeological Area of Marroquíes Bajos. The main contribution of this excavation in the context of all the research done in this archaeological area has to do with its Chalcolithic phase, in particular with the delimitation and documentation of the fifth ditch in an extension that was hitherto unknown. Along with this ditch, a fortified structure was also documented, which consisted of two walls and a semicircular hollow tower which was very likely to protect an entrance. Finally, the research has yielded the first data on the food and health of the people in this settlement by analysing a set of bone remains located on the bottom of the ditch.

    Este trabajo presenta los resultados obtenidos en la excavación realizada en la parcela DOC-1 (SUNP-1 de la Zona Arqueológica de Marroquíes Bajos. La principal aportación de la excavación al ámbito de las investigaciones desarrolladas en esta zona arqueológica se centra en su fase calcolítica, concretamente en la delimitación y documentación del quinto foso en una extensión no conocida hasta el momento. Asociado este foso se documentó igualmente una estructura fortificada compuesta por dos muros y una torre semicircular hueca que muy posiblemente protegía un acceso. Finalmente la investigación desarrollada a permitido obtener los primeros datos sobre alimentación y salud de la población del asentamiento mediante el análisis de un conjunto de restos óseos localizados en el fondo del foso.

  13. Beneficial uses of paper mill residuals for New York State`s recycled-paper mills. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    This report evaluates the New York paper mill industry in terms of the productive management and treatment of solid wastes. It identifies current efforts by recycling mills to beneficially use paper mill residuals (often called sludge) and suggests additional options that should be considered by the industry in general and individual mills in particular. It also examines the regulations and economics affecting the mills and suggests actions that could improve the industry`s ability to convert wastes to value-added products. The report recommends that the mills should continue measures to reduce fiber and filler clay losses, promote the transfer of usable fiber and clay to mills able to use them, upgrade sludge dewatering capabilities, and take a more regional approach to solid waste disposal problems. State agencies are urged to support these efforts, encourage the development and commercialization of new beneficial use technologies, and reduce regulatory barriers whenever possible.

  14. Understanding dental CAD/CAM for restorations - dental milling machines from a mechanical engineering viewpoint. Part A: chairside milling machines.

    Science.gov (United States)

    Lebon, Nicolas; Tapie, Laurent; Duret, Francois; Attal, Jean-Pierre

    2016-01-01

    The dental milling machine is an important device in the dental CAD/CAM chain. Nowadays, dental numerical controlled (NC) milling machines are available for dental surgeries (chairside solution). This article provides a mechanical engineering approach to NC milling machines to help dentists understand the involvement of technology in digital dentistry practice. First, some technical concepts and definitions associated with NC milling machines are described from a mechanical engineering viewpoint. The technical and economic criteria of four chairside dental NC milling machines that are available on the market are then described. The technical criteria are focused on the capacities of the embedded technologies of these milling machines to mill both prosthetic materials and types of shape restorations. The economic criteria are focused on investment costs and interoperability with third-party software. The clinical relevance of the technology is assessed in terms of the accuracy and integrity of the restoration.

  15. Analytic representations of Yang–Mills amplitudes

    Energy Technology Data Exchange (ETDEWEB)

    Bjerrum-Bohr, N.E.J. [Niels Bohr International Academy and Discovery Center, The Niels Bohr Institute, University of Copenhagen, Blegdamsvej 17, DK-2100 Copenhagen Ø (Denmark); Bourjaily, Jacob L., E-mail: bourjaily@nbi.ku.dk [Niels Bohr International Academy and Discovery Center, The Niels Bohr Institute, University of Copenhagen, Blegdamsvej 17, DK-2100 Copenhagen Ø (Denmark); Damgaard, Poul H. [Niels Bohr International Academy and Discovery Center, The Niels Bohr Institute, University of Copenhagen, Blegdamsvej 17, DK-2100 Copenhagen Ø (Denmark); Feng, Bo [Zhejiang Institute of Modern Physics, Zhejiang University, Hangzhou City, 310027 (China)

    2016-12-15

    Scattering amplitudes in Yang–Mills theory can be represented in the formalism of Cachazo, He and Yuan (CHY) as integrals over an auxiliary projective space—fully localized on the support of the scattering equations. Because solving the scattering equations is difficult and summing over the solutions algebraically complex, a method of directly integrating the terms that appear in this representation has long been sought. We solve this important open problem by first rewriting the terms in a manifestly Möbius-invariant form and then using monodromy relations (inspired by analogy to string theory) to decompose terms into those for which combinatorial rules of integration are known. The result is the foundations of a systematic procedure to obtain analytic, covariant forms of Yang–Mills tree-amplitudes for any number of external legs and in any number of dimensions. As examples, we provide compact analytic expressions for amplitudes involving up to six gluons of arbitrary helicities.

  16. An ambitwistor Yang-Mills Lagrangian

    International Nuclear Information System (INIS)

    Mason, L.J.; Skinner, D.

    2006-01-01

    We introduce a Chern-Simons Lagrangian for Yang-Mills theory as formulated on ambitwistor space via the Ward, Isenberg, Yasskin, Green, Witten construction. The Lagrangian requires the selection of a codimension-2 Cauchy-Riemann submanifold which is naturally picked out by the choice of space-time reality structure and we focus on the choice of Euclidean signature. The action is shown to give rise to a space-time action that is equivalent to the standard one, but has just cubic vertices. We identify the ambitwistor propagators and vertices and work out their corresponding expressions on space-time and momentum space. It is proposed that this formulation of Yang-Mills theory underlies the recursion relations of Britto, Cachazo, Feng and Witten and provides the generating principle for twistor diagrams for gauge theory

  17. John Stuart Mill's Philosophy of Persuasion

    Directory of Open Access Journals (Sweden)

    Helen Ruth McCabe

    2014-02-01

    Full Text Available In his youth, John Stuart Mill followed his father’s philosophy of persuasion but, in 1830, Mill adopted a new philosophy of persuasion, trying to lead people incrementally towards the truth from their original stand-points rather than engage them antagonistically. Understanding this change helps us understand apparent contradictions in Mill’s cannon, as he disguises some of his more radical ideas in order to bring his audience to re-assess and authentically change their opinions. It also suggests a way of re-assessing the relationship between Mill’s public and private works, to which we should look if we are attempting to understand his thought.

  18. Decommissioning of the Zirovski Vrh Uranium Mill

    International Nuclear Information System (INIS)

    Zabukovec, I.; Logar, Z.; Arh, S.

    1996-01-01

    First of the inventions, which will ensure the beginning of the permanent closure of uranium ore exploitation and prevent the consequences of mining in the Zirovski Vrh Uranium Mine, abandoned according to the law from July 1992, will be soon realized. After obtaining the location permit for dismantling the equipment, foundations and installations in four main buildings of the uranium mill, current procedures are carried out in order to obtain the permission for performing the mentioned activities and to make contracts with acting organizations. Those buildings contain sources of radiation, which were considered within the legal procedures and design of technical documentation. Instructions for decontamination and protection against radiation, both issued with those projects, highly contribute to the Slovenian experience in the field of practical management of radiation sources. Additional requirement, which enters difference between decommissioning of similar mills worldwide and the one mentioned, is preservation of buildings in order to change their purpose. (author)

  19. Optimization of uranium mill tailings disposal practices

    International Nuclear Information System (INIS)

    Richardson, Allan C.B.; Rowe, William D.

    1984-01-01

    So far as we have been to discern, no uranium mill tailings pile has yet been properly stabilized for long-term disposal. And although considerable effort is now being directed at developing practical solutions and at establishing standards for permanent disposal, the difficulties in application are diverse. They arise from the variety of environments in which milling is conducted, the significant costs associated with disposing of the large volumes of materials involved, the diverse nature of the hazards to be protected against, and uncertainties in both performance of controls and in how to determine societal responsibilities for management of the long term hazards to human populations from uranium tailings. There are 24 uranium tailings piles in the United States which no longer have responsible owners, and must now be disposed of by the U.S. Government in order to protect public health

  20. Environmental impact of uranium mining and milling

    International Nuclear Information System (INIS)

    Dory, A.B.

    1981-08-01

    The author introduces the subject with an overview of the regulatory requirments and philosophy applied to uranium mines and mills. The special attention given to tailings management is highlighted, and a discussion of the basic environmental concerns is concluded with an itemizing of the main tasks facing the AECB. The extent of the environmental impact of uranium mining, milling and waste management is illustrated with specific details pertaining to mines in the Elliot Lake area. The author concludes that the impact on the ground and surface water system is not alarming, and the impact on air quality is not significant beyond a few hundred metres from the mining facilities. The publicly perceived impact is discussed, followed by a rationale for the continued licensing of new uranium mining operations complete with tailings management facilities

  1. Elemental characterization of Tummalapalle uranium mill tailing

    International Nuclear Information System (INIS)

    Patra, A.C.; Sahoo, S.K.; Thakur, V.K.; Dubey, J.S.; Jha, S.K.; Tripathi, R.M.; Sharma, D.B.

    2018-01-01

    Elements are present in environmental matrices at varying concentrations. Their levels may increase due to anthropogenic activities like transportation, industrial activities, agriculture, urbanization and human activities. Trace elements can be classified as potentially toxic (eg. cadmium, arsenic, mercury, lead, nickel), probably essential (eg. cobalt, vanadium) and essential (eg. iron, zinc, copper, selenium, manganese). Due to the expansion of the Indian Nuclear Power Programme, new uranium mining sites are coming up. Mining and milling produce large quantities of low active mill tailings contained in engineered Tailings Ponds. The tailings are amenable for interaction with the geochemical forces and can act as potential sources of contamination. Thus it is necessary to ascertain the concentrations of elements that are present therein. In this paper we aim to characterize the uranium tailings generated from Tummalapalle uranium mining facility in Kadappa district, Andhra Pradesh, India

  2. Health concerns in uranium mining and milling

    International Nuclear Information System (INIS)

    Archer, V.E.

    1981-01-01

    Mortality of uranium miners from both lung cancer and other respiratory diseases is strongly dependent on exposure to radon daughters, cigarette smoking and height. Lung cancer among 15 different mining groups (uranium, iron, lead, zinc) was analyzed to determine what factors influence incidence and the induction-latent period. At low exposure or exposure rates, alpha radiation is more efficient in inducing lung cancer, producing an upward convex exposure-response curve. The induction-latent period is shortened by increased age at start of mining, by cigarette smoking and by high exposure rates. Instead of extrapolating downward from high exposures to estimate risk at low levels, it is suggested that it might be more appropriate to use cancer rates associated with background radiation as the lowest point on the exposure-response curve. Although health risks are much greater in uranium mines than mills, there is some health risk in the mills from long-lived radioactive materials

  3. Geothermal Mill Redevelopment Project in Massachusetts

    Energy Technology Data Exchange (ETDEWEB)

    Vale, A.Q.

    2009-03-17

    Anwelt Heritage Apartments, LLC redeveloped a 120-year old mill complex into a mixed-use development in a lower-income neighborhood in Fitchburg, Massachusetts. Construction included 84 residential apartments rented as affordable housing to persons aged 62 and older. The Department of Energy (“DOE”) award was used as an essential component of financing the project to include the design and installation of a 200 ton geothermal system for space heating and cooling.

  4. Environmental impact of uranium mining and milling

    International Nuclear Information System (INIS)

    Dory, A.B.

    1981-08-01

    The Atomic Energy Control Board is now involved from the early planning stages in the development of uranium mine/mill facilities. As a result, new facilities (including tailings management areas) are designed and developed to meet a high standard. The impact of the mines and tailings areas in the Elliot Lake area on ground and surface waters and air quality is discussed in detail

  5. Yang--Mills vacua in Landau gauge

    International Nuclear Information System (INIS)

    Frampton, P.H.; Hagiwara, T.; Palmer, W.F.; Pinsky, S.S.

    1977-01-01

    A vacuum gauge field A/sub μ//sup a/ for Yang-Mills theory is constructed; this field is pure vacuum (A/sub μ//sup a/ = 0) at the origin, approaches at large distances, the Belavin-Polyakov-Schwartz-Tyupkin pseudo-particle, and satisfies delta/sub μ/A/sub μ//sup a/ = 0 everywhere. The net topological charge is zero, and there is a Dirac-like string terminating at the origin

  6. Chemical-milling solution for invar alloy

    Science.gov (United States)

    Batiuk, W.

    1980-01-01

    Excellent surface finishes and tolerances are achieved using two formulations. Solution A gives finish of 3.17 micrometers after milling at 57 to 63 deg C. Constituents of A are: Hydrofluoric acid (70%), 5,8 oz/gal; nitric acid (40-42) degrees Baume), 40 oz/gal. Alternative solution gives 2.16 micrometer finish, and differs from A by addition of 7% phosphoric acid. Formulations eliminate channeling at root fillets, dishing, island formation, and overhangs.

  7. Update of NRC uranium mill licensing activities

    International Nuclear Information System (INIS)

    Martin, J.B.

    1978-01-01

    Increased vigilance must be given to controlling emissions from active milling operations, particularly windblown tailings, to assure that the soon-to-be-effective EPA Fuel Cycle Standard is met. Comprehensive environmental monitoring programs will have to be developed to confirm that, in fact, the limit is met. Just as was the case last year, tailings management and disposal is still the major item of concern relating to uranium milling operations. As stated earlier, the NRC feels that below-grade disposal is the preferred method of tailings disposal in that it provides the greatest assurances of long-term isolation. In any event, tailings must be disposed of in such a way that no active care is required of disposal sites, to avoid committing future generations to a significant, lingering obligation to care for wastes generated to produce benefits which they will only indirectly receive, if at all. While the primary means of providing long-term isolation of tailings must be by physical barriers, as a prudent, supplementary measure of control, we are concluding in the GEIS on Uranium Milling that ownership of disposal sites by a Government agency is desirable. We expect a low level of continued surveillance at disposal sites with small expense involved. We are concluding that requiring operators to contribute on the order of $100,000 per disposal site to cover ongoing expenses would be the most apropriate means of conforming to the principle that the waste generator should pay full costs of waste disposal. We feel such an arrangement would be fair, simple, and efficient, favoring it over complicated schemes involving such things as taxes on product or tailings generated and continued management of ear-marked funds. Legislation is now pending in the Congress which would give NRC direct regulatory control over mill tailings and put into place the authorities needed to implement the long-term control and funding arrangements discussed above

  8. Multifractal properties of ball milling dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Budroni, M. A., E-mail: mabudroni@uniss.it; Pilosu, V.; Rustici, M. [Dipartimento di Chimica e Farmacia, Università degli Studi di Sassari, Via Vienna 2, Sassari 07100 (Italy); Delogu, F. [Dipartimento di Ingegneria Meccanica, Chimica, e dei Materiali, Università degli Studi di Cagliari, via Marengo 2, Cagliari 09123 (Italy)

    2014-06-15

    This work focuses on the dynamics of a ball inside the reactor of a ball mill. We show that the distribution of collisions at the reactor walls exhibits multifractal properties in a wide region of the parameter space defining the geometrical characteristics of the reactor and the collision elasticity. This feature points to the presence of restricted self-organized zones of the reactor walls where the ball preferentially collides and the mechanical energy is mainly dissipated.

  9. Biologi Perbungaan Tanaman Avokad (Persea Americana Mill.)

    OpenAIRE

    SUKAMTO, L. AGUS

    1985-01-01

    L. AGUS SUKAMTO 1985.The flowering biology of avocado (Persea americana Mill.). Berita Biologi 3 (1) 8 - H.- A study on the flowering biology of avocado available at Bogor Botanic Garden was made.The observation was conducted in respects to the opening and closing of the flowers, the versality of the pollen grains which are then related to the fruit production.The climatic condition as well as pollination agents which may affect on the vertilization in avocado are also discussed.

  10. Geometry of Yang-Mills fields

    International Nuclear Information System (INIS)

    Atiyah, M.F.

    1978-01-01

    In this talk I shall explain how information about classical solutions of Yang-Mills equations can be obtained, rather surprisingly, from algebraic geometry. Although direct physical interest is restricted to the case of four dimensions I shall begin by discussing the two-dimensional case. Besides preparing the ground for the four-dimensional problem this has independent mathematical (and possible physical) interest, and very complete results can be obtained. (orig.) [de

  11. PENGARUH TEKNIK PENYAYATAN PAHAT MILLING PADA CNC MILLING 3 AXIS TERHADAP TINGKAT KEKASARAN PERMUKAAN BENDA BERKONTUR

    Directory of Open Access Journals (Sweden)

    Irawan Irawan

    2016-06-01

    Full Text Available Dalam perindustrian penggunaan mesin CNC Milling sangat di andalkan untuk mendapatkan hasil yang optimum baik secara kualitas maupun kuantitas. Akan tetapi muncul permasalahan,bagaimana pengaruh perbedaan teknik penyayatan terhadap nilai kekasaran permukaan benda kerja berkontur dalam proses milling CNC. Penelitian ini bertujuan untuk mengetahui pengaruh metode penyayatan pahat milling terhadap kekasaran permukaan benda kerja berkontur yang di hasilkan pada proses freis dengan menggunakan mesin milling CNC - 3Axis Makino S33. Peneliitan ini merancang dan membuat molding Cover stop kontak dikarenakan permukaan produk cover stop kontak memiliki permukaan yang berkontur. Molding ini terdiri dari Core dan Cavity. Benda kerja yang akan di ujicoba adalah bagian Core sebanyak 3 buah. Dalam pengerjaanya benda ujicoba diberikan perlakuan yang sama antara lain, kedalaman pemotongan, kecepatan spindle, dan jenis pahat yang di gunakan, kemudian dari ke 3 benda kerja tersebut masing- masing di tentukan 3 titik pengukuran. Dari hasil pengujian yang di peroleh kemudian dilakukan analisis tabel. Nilai kekasaran permukaan terendah (rata-rata kekasaran 0.899µ m dengan waktu permesinan tercepat (waktu proses 1 jam 08 menit pada penggunaan metode penyayatan 3D offset finishing. Penulis menyarankan agar dalam proses freis menggunakan mesin milling CNC 3Axis Makino S33 pada permukaan benda yang berkontur, untuk mendapatkan nilai kekasaran yang terendah disarankan menggunakan metode penyayatan 3D offset finishing.

  12. Continuum regularized Yang-Mills theory

    International Nuclear Information System (INIS)

    Sadun, L.A.

    1987-01-01

    Using the machinery of stochastic quantization, Z. Bern, M. B. Halpern, C. Taubes and I recently proposed a continuum regularization technique for quantum field theory. This regularization may be implemented by applying a regulator to either the (d + 1)-dimensional Parisi-Wu Langevin equation or, equivalently, to the d-dimensional second order Schwinger-Dyson (SD) equations. This technique is non-perturbative, respects all gauge and Lorentz symmetries, and is consistent with a ghost-free gauge fixing (Zwanziger's). This thesis is a detailed study of this regulator, and of regularized Yang-Mills theory, using both perturbative and non-perturbative techniques. The perturbative analysis comes first. The mechanism of stochastic quantization is reviewed, and a perturbative expansion based on second-order SD equations is developed. A diagrammatic method (SD diagrams) for evaluating terms of this expansion is developed. We apply the continuum regulator to a scalar field theory. Using SD diagrams, we show that all Green functions can be rendered finite to all orders in perturbation theory. Even non-renormalizable theories can be regularized. The continuum regulator is then applied to Yang-Mills theory, in conjunction with Zwanziger's gauge fixing. A perturbative expansion of the regulator is incorporated into the diagrammatic method. It is hoped that the techniques discussed in this thesis will contribute to the construction of a renormalized Yang-Mills theory is 3 and 4 dimensions

  13. Radiation hazards of uranium mining and milling

    International Nuclear Information System (INIS)

    Fry, R.M.

    1975-09-01

    This paper examines each of the radiological problems that arise in these processes and explains their scientific background. The major operational requirement is to ensure that exposure of miners over their working lives to radon and its daughter products does not lead to an unacceptable increase in their chance of contracting lung cancer. Studies on the incidence of lung cancer amongst underground uranium miners indicate that this risk will be small if lifetime exposures are kept below about 120 'working level months', even amongst underground miners who smoke cigarettes. The risk is much smaller again for miners who do not smoke cigarettes. Other hazards that must be controlled are exposure of miners and mill workers to external radiation and to dusts containing long-lived radioactive alpha emitting isotopes. Finally, the solid waste products from the mill (the tailings) which contain most of the naturally occurring radioactivity, must be properly impounded and after closure of the mill, stabilized to ensure long-term containment. Access by the public to the stabilized tailings must be controlled and habitation within the controlled area prohibited. (author)

  14. John Stuart Mill on socialism and accountability

    Directory of Open Access Journals (Sweden)

    Francisco José Sales Rocha

    2010-01-01

    Full Text Available http://dx.doi.org/10.5007/1677-2954.2010v9n1p17 Este artigo mostra que o tipo de socialismo proposto por John Stuart Mill é marcado por uma forte preocupação com a controlabilidade do poder econômico e político. Ele rejeitou enfaticamente os modelos centralistas de socialismo por entender que eles levam a uma grande concentração de poder que compromete a liberdade. Para J. S. Mill, o socialismo deve ser implantado lentamente a partir de reformas amplamente discutidas que favoreçam a cidadania econômica dos trabalhadores, promovam a participação deles nas decisões referentes ao processo produtivo e em associações voluntárias. J. S. Mill acreditava que a competição econômica é essencial para o adequado funcionamento de uma economia socialista. Ele não esperava que tal economia se tornasse uma realidade em um futuro próximo.

  15. Identification of source and recharge zones in an aquifer system from water stable isotope. Case Study Bajo Cauca Antioqueno

    International Nuclear Information System (INIS)

    Palacio B, Paola Andrea; Betancur V, Teresita

    2008-01-01

    Hydrology and hydrogeochemical are auxiliary techniques to valid conceptual hydrogeology an recharge models. Stable isotopes from water trace sources and path flow and Tritium indicates age. This paper is about the use of D 18, D 2H y 3H to study the aquifer system on Bajo Cauca antioqueno

  16. John Stuart Mill: utilitarismo e liberalismo = John Stuart Mill: utilitarianism and liberalism

    Directory of Open Access Journals (Sweden)

    Simões, Mauro Cardoso

    2013-01-01

    Full Text Available Meu objetivo, neste trabalho, é investigar a compatibilidade das teses utilitaristas e liberais de John Stuart Mill. Apresentarei, inicialmente, os principais críticos da filosofia moral e política de Mill, para os quais o discípulo de Bentham teria abandonado o utilitarismo ou, ainda, não esclarecido suficientemente seu princípio da liberdade, o que o tornaria um pensador assistemático e inconsistente. Minha tese é contrária a tais interpretações, uma vez que sustenta ser Mill consistente. Em seguida, defenderei uma interpretação do princípio da liberdade e da individualidade, procurando demonstrar que seu utilitarismo é compatível com seu liberalismo

  17. Analysis of crystallite size and microdeformation crystal lattice the tungsten carbide milling in mill high energy

    International Nuclear Information System (INIS)

    Silva, F.T. da; Nunes, M.A.M.; Souza, C.P. de; Gomes, U.U.

    2010-01-01

    The tungsten carbide (WC) has wide application due to its properties like high melting point, high hardness, wear resistance, oxidation resistance and good electrical conductivity. The microstructural characteristics of the starting powders influences the final properties of the carbide. In this context, the use of nanoparticle powders is an efficient way to improve the final properties of the WC. The high energy milling stands out from other processes to obtain nanometric powders due to constant microstructural changes caused by this process. Therefore, the objective is to undertake an analysis of microstructural characteristics on the crystallite size and microdeformations of the crystal lattice using the technique of X-ray diffraction (XRD) using the Rietveld refinement. The results show an efficiency of the milling process to reduce the crystallite size, leading to a significant deformation in the crystal lattice of WC from 5h milling. (author)

  18. Milling damage on Carbon Fibre Reinforced Polymer using TiAlN coated End mills

    Science.gov (United States)

    Konneh, Mohamed; Izman, Sudin; Rahman Kassim, Abdullah Abdul

    2015-07-01

    This paper reports on the damage caused by milling Carbon Fibre Reinforced Composite (CFRP) with 2-flute 4 mm-diameter solid carbide end mills, coated with titanium aluminium nitride. The machining parameters considered in work are, rotation speed, feed rate and depth of cut. Experiments were designed based on Box-Behnken design and the experiments conducted on a Mikrotool DT-110 CNC micro machine. A laser tachometer was used to ascertain a rotational speed for conducting any machining trial. Optical microscopy examination reveals minimum delamination value of 4.05 mm at the spindle speed of 25,000 rpm, depth of cut of 50μm and feed rate of 3 mm/min and the maximum delamination value of 5.04 mm at the spindle speed of 35000 rpm, depth of cut of 150μm and feed rate of 9 mm/min A mathematical model relating the milling parameters and delamination has been established.

  19. Peran Tradisi Lisan Iko-Iko Berbasis Sastra Melayu dalam Penguatan Komunitas Etnis Bajo

    Directory of Open Access Journals (Sweden)

    I Ketut Suardika

    2016-12-01

    Full Text Available Etnia Bajo merupakan  suatu komunitas berbudaya  Melayu hidup secara berkelompok  di berbagai wilayah pesisir pantai dan pulau terpencil eli Nusantara dan Asia Tenggara. Di Kawasan Barat Indonesia dan Malay­ sia Barat disebut Orang Laut, atau Suku Laut. Di Malaysia Timur, Brunai Darussalam, dan Philipina disebut Orang Bajau.Meskipun memiliki nama yang berbeda-beda berdasarkan  geografis tempat tinggalnya, tetapi dari segi  budaya  memiliki  persamaan  khususnya  proses  pewarisan  pengetahuan,  nilai, dan  keterampilan dalam bentuk  penguatan  komunitas  melalui tradisi lisan Iko-iko, nauya (nyanyian dan pantun. Beberapa kajian  menunjukkan   bahwa  Etnis  Bajo  ini  berasal  dari  Selat  Malaka,  selanjutnya   mereka  tersebar  di kawasan  Kepulauan  Melayu  (Malaysia,  Indonesia,  Brunai Darussalam, dan Philipina  akibat  kedatangan imperialisme  Portugis  yang merebut  Malaka  pada tahun 1511, Orang Bajo  sebagai salah satu inti rakyat Kerajaan Malaka bangkit melawan Imperialisme Portugis, setelah kerajaannya  takluk. mereka tetap melan­ jutkan perlawanan  eli laut dengan tersebar  di eli berbagai  kawasan tersebut. Pola pemukiman  yang semi­ nomaden  sebagai  nelayan  tradisional,  mengakibatkan  mereka mengembangkan sistem  pembelajaran  asli (learning comunitas system. Salah satu media pembelajaran  yang banyak digunakan adalah iko-iko (cerita kepahlawanan, jenis  tradisi  lisan  ini terancam  punah karena  kurang  eliminati generasi  muda, umumnya mereka yang bisa mengisahkannya berusia sekitar 50 tahun ke atas. Tradisi sastra iko-iko berperan menyam­ paikan pesan  moral dan semangat  juang yang dituturkan  secara lisan  dari generasi  ke generasi, berkisah tentang kepahlawanan dan elibawakan selama beberapa jam yang dinyanyikan menjelang tidur dan atau saat dalam  pelayaran.  Ciri  khas  iko-iko  adalah  lirik  dan baitnya  secara  teratur  yang

  20. Peculiarities of binding composition production in vortex jet mill

    Science.gov (United States)

    Zagorodnyuk, L. Kh; Lesovik, V. S.; Sumskoy, D. A.; Elistratkin, M. Yu; Makhortov, D. S.

    2018-03-01

    The article investigates the disintegration of perlite production waste in a vortex jet mill; the regularities of milling were established. Binding compositions were obtained at different ratios of cement vs. perlite sand production waste in the vortex jet mill in various milling regimes. The peculiarities of milling processes were studied, and technological and physicomechanical properties of the binding compositions were determined as well. The microstructure of the cement stones made of activated Portland cement and binding compositions in the vortex jet mill was elucidated by electron microscopy. The open pores of the cement-binding compositions prepared using perlite fillers were found to be filled by newgrowths at different stages of collective growth. The microstructure of the binding compositions is dense due to rationally proportioned composition, effective mineral filler— perlite waste — that creates additional substrates for internal composite microstructure formation, mechanochemical activation of raw mixture, which allows obtaining composites with required properties.

  1. Health physics program for the Edgemont Uranium Mill decommissioning project

    International Nuclear Information System (INIS)

    Polehn, J.L.; Wallace, R.G.; Reed, R.P.; Wilson, G.T.

    1986-01-01

    The Tennessee Valley Authority (TVA) is actively involved in decommissioning a uranium mill located near the town of Edgemont, South Dakota. The Edgemont Mill Decommissioning Project, which is unique in many respects, will involve dismantlement of the old inactive mill building and excavation and transportation of several million tons of uranium mill tailings to a permanent disposal site. To ensure that workers are adequately protected from radiation exposure during decommissioning operations, a health physics program appropriate for the decommissioning situation was developed. The Edgemont Mill Decommissioning Project Health Physics Manual (HPM) gives the programmatic requirements for worker radiation protection. The requirements of the HPM are implemented by means of detailed onsite operating procedures. The Edgemont project health physics program was developed using currently available regulations and guidance for an operating uranium mill with appropriate modifications for decommissioning. This paper discusses the development, implementation, and documentation of that program

  2. Development of an electromechanical principle for wet and dry milling

    Science.gov (United States)

    Halbedel, Bernd; Kazak, Oleg

    2018-05-01

    The paper presents a novel electromechanical principle for wet and dry milling of different materials, in which the milling beads are moved under a time- and local-variable magnetic field. A possibility to optimize the milling process in such a milling machine by simulation of the vector gradient distribution of the electromagnetic field in the process room is presented. The mathematical model and simulation methods based on standard software packages are worked out. The results of numerical simulations and experimental measurements of the electromagnetic field in the working chamber of a developed and manufactured laboratory plant correlate well with each other. Using the obtained operating parameters, dry milling experiments with crushed cement clinker and wet milling experiments of organic agents in the laboratory plant are performed and the results are discussed here.

  3. Jaduguda uranium mill : rich experiences for future challenges

    International Nuclear Information System (INIS)

    Beri, K.K.

    1991-01-01

    India's only uranium milling plant at Jaduguda was commissioned in 1967-68 utilising low grade uranium ore. The flowsheet of the mill and controlling parameters were based on studies done on laboratory and pilot plant scale tests at the Bhabha Atomic Research Centre, Bombay. The mill has worked upto expectation except in few areas where modifications had to be done for smooth production. Apart from this improvements in operating practices have been done based on experience gained in operating the mill, incorporating the recent technological advances. In the recent past, the mill was expanded to increase the installed capacity by 40% and was commissioned in October 1987. The expanded mill has given the desired capacity and is working smoothly. The present paper deals with the experience gained in running the plant for the last 20 years and changes incorporated (author). 4 figs

  4. Fault Detection in Coal Mills used in Power Plants

    DEFF Research Database (Denmark)

    Odgaard, Peter Fogh; Mataji, Babak

    2006-01-01

    In order to achieve high performance and efficiency of coal-fired power plants, it is highly important to control the coal flow into the furnace in the power plant. This means suppression of disturbances and force the coal mill to deliver the required coal flow, as well as monitor the coal mill...... in order to detect faults in the coal mill when they emerge. This paper deals with the second objective. Based on a simple dynamic model of the energy balance a residual is formed for the coal mill. An optimal unknown input observer is designed to estimate this residual. The estimated residual is following...... tested on measured data of a fault in a coal mill, it can hereby be concluded that this residual is very useful for detecting faults in the coal mill....

  5. Analytical Prediction of Three Dimensional Chatter Stability in Milling

    Science.gov (United States)

    Altintas, Yusuf

    The chip regeneration mechanism during chatter is influenced by vibrations in three directions when milling cutters with ball end, bull nose, or inclined cutting edges are used. A three dimensional chatter stability is modeled analytically in this article. The dynamic milling system is formulated as a function of cutter geometry, the frequency response of the machine tool structure at the cutting zone in three Cartesian directions, cutter engagement conditions and material property. The dynamic milling system with nonlinearities and periodic delayed differential equations is reduced to a three dimensional linear stability problem by approximations based on the physics of milling. The chatter stability lobes are predicted in the frequency domain using the proposed analytical solution, and verified experimentally in milling a Titanium alloy with a face milling cutter having circular inserts.

  6. Properties and sinterability of wet and dry attrition-milled OREOXed powder

    International Nuclear Information System (INIS)

    Lee, J. W.; Kim, J. H.; Kim, W. K.; Park, K. I.; Lee, J. W.

    2001-01-01

    The powder properties and sinterability were investigated with the powder prepared by wet and dry attrition milling of OREOX-treated powder. The OREOX-treated powder was prepared from the simulated spent fuel. Powder having less than 1 μm of average particle size could be obtained by dry milling, but not be obtained by wet milling. Thus, specific surface area of dry milled powder was higher than that of wet milled powder. With increasing of milling time, dry milled powder formed dense agglomerate while wet milled powder showed loose agglomerate. The pellets with higher than 95% T.D. of sintered density and larger than 7 μm of grain size were made with the milled powder regardless of milling method. The milling time in wet milling has greatly improved the sinterability. The pellets produced with dry milled powder have higher sintered density and larger grain size

  7. Habilidades pre-escolares de los niños nacidos prematuramente y con bajo peso

    Directory of Open Access Journals (Sweden)

    Sasha A. Martínez-Espiet

    2016-06-01

    Full Text Available RESUMEN: El objetivo de este estudio fue conocer el nivel de desarrollo en la etapa pre-escolar de un grupo de niños nacidos prematuramente y con bajo peso. Se evaluó un grupo 20 niños de cuatro años nacidos prematuramente y con bajo peso y un grupo de 20 niños nacidos luego de gestación completada y peso deseado utilizando la prueba de integración visual-motora Beery-Buktenica. Además, se administró el cuestionario del desarrollo Ages and Stages (ASQ-3 a las 40 madres. El análisis estadístico se llevó a cabo mediante una prueba t de studentpara grupos independientes. El grupo de niños nacidos prematuramente obtuvo puntuaciones significativamente inferiores en las pruebas que medían las habilidades de percepción visual (µ1 83.65 ; µ2 93.7 (p=0.0001, integración visual-motora (µ1 93.6 ; µ2 104.8 (p=0.001 y motor fina (µ1 36.00 ; µ2 44.25 (p=0.033 al ser comparados con el grupo de niños nacidos luego de una gestacióncompletada.El estudio sugiere que los niños nacidos prematuramente y con bajo peso presentan menor ejecución en el desarrollo sensorio-motor durante la etapa pre-escolar. Estas desventajas pasan desapercibidas y pueden representar rezago en las tareas escolares futuras que requieren de dichas habilidades. Es importante fomentar la evaluación y estimulación ambiental temprana en esta población aún en ausencia de indicadores de riesgo. ABSTRACT: The purpose of this study was to evaluate the development among a group of pre-school children born premature and with low weight. We evaluated a group of four years old children; 20 children born prematurely and 20 children born after a full gestation and desired weight, using the Beery-Buktenica visual-motor integration test. We also administered the Ages and Stages Questionnaire (ASQ-3 development test to all 40 mothers. Statistical analysis was performed using student t test for independent groups. The group of children born prematurely scored significantly lower

  8. Nanograin formation in milled MoO3 powders

    International Nuclear Information System (INIS)

    Guerrero-Paz, J; Dorantes-Rosales, H; Aguilar-Martínez, J A; Garibay-Febles, V

    2013-01-01

    Powder of Molybdenum trioxide was milled for different times in horizontal ball mills. Such powder was characterized by TEM and XRD. Powder was rapidly de-agglomerated and fragmented up to attain nanoplates of two types, amorphous and crystalline. Finally, cold-welding of nanoplates occurred permitting some relaxation process to obtain a more stable energized structure consisting of equiaxial crystalline nanograins after 16 hours of milling.

  9. Wastes from former mining and milling activities in Tajikistan

    International Nuclear Information System (INIS)

    Mirsaidov, U.M.

    2012-01-01

    This article is devoted to wastes from former mining and milling activities in Tajikistan. Currently, the serious radiological and ecological problems in Tajikistan are uranium mining and milling activities consequences overcoming which intensively developed during the soviet period. After the collapse of USSR, the uranic ores extraction in Tajikistan stopped due to deposit's output completion on the territory of the republic. Remediation of mining and milling activities' sites became the most urgent once all mines were closed.

  10. Bajo peso al nacer, crecimiento y desarrollo en el primer año de vida

    Directory of Open Access Journals (Sweden)

    Elia Rosa Lemus Lago

    1997-04-01

    Full Text Available Se efectuó un estudio descriptivo, longitudinal y retrospectivo en el área de salud del Policlínico Docente "19 de Abril" con los niños nacidos con peso inferior a los 2 500 g, en el año 1994, y se siguió su evolución clínica durante el primer año de vida, que correspondió a una muestra de 23 infantes. Los datos fueron recogidos de las historias clínicas individuales de los niños y de la embarazada. Se analizaron los parámetros peso, talla, circunsferencia cefálica, valoración nutricional y desarrollo psicomotor. Predominó el bajo peso para la edad gestacional con un 65,2 y el 34,7 % correspondió a los nacidos antes del término de la gestación. El 100 % de los pretérmino al año de vida tuvieron una valoración nutricional normal. No se comportaron de igual forma los de bajo peso para la edad gestacional en los que el 20 % quedaron por debajo del 3er. percentil.A descriptive, longitudinal and retrospective study was conducted at the health area of the "19 de Abril" Teaching Polyclinic. 23 infants who were born in 1994 with a birth weight < 2 500 g were included in the sample. Their clinical evolution was followed during the first year of life. The data were obtained from the individual medical histories of the children and of the pregnant women. The following parameters were analyzed: weight, size, cephalic perimeter, nutritional assessment and psychomotor development. Low weight prevailed for the gestational age with 65.2 %, whereas 34.7 % corresponded to preterm deliveries. 100 % of the preterm infants had a normal nutritional assessment after the first year of life. However, 20 % of those with low weight at the gestational age remained under the third percentile.

  11. Peso bajo, sobrepeso, obesidad y crecimiento en adolescentes en el Perú 2009-2010

    Directory of Open Access Journals (Sweden)

    Jaime Pajuelo R

    2015-04-01

    Full Text Available Introducción: El grupo de adolescentes representan, de alguna manera, la quinta parte de la población y no se encuentran al margen de los problemas nutricionales. Objetivos: Conocer la situación nutricional, el crecimiento y algunos factores determinantes, en adolescentes en el Perú. Diseño: Estudio descriptivo, observacional, transversal. Participantes: Adolescentes. Intervenciones: En 14 753 adolescentes de 10 a 19 años se obtuvo el peso, talla, índice de masa corporal (IMC. Se utilizó la referencia percentilar de Must y los puntajes Z de OMS. Principales medidas de resultados: Promedios y DE. Prevalencias IC 95%. OR IC 95%. Chi-cuadrado y regresión múltiple. Resultados: Se encontró prevalencias de 2,6; 5,9; 79; 9,3 y 3,2 (Must; 0,2; 1,1; 82,6; 12,5; 3,5% (OMS de déficit, peso bajo, normal, sobrepeso y obesidad, respectivamente. Predominó el sobrepeso-obesidad en áreas urbanas, en los no pobres, en la costa, selva y Lima Metropolitana, en los que vivían por debajo de 3 000 msnm. Los factores de riesgo para el déficit-bajo peso fueron: género masculino, pobres extremos, pobres no extremos, vivir en la costa norte y sierra centro, y como factor protector los que estaban por debajo de los 1 000 msnm. Los factores de riesgo del sobrepeso-obesidad fueron el vivir en áreas urbanas, costa sur y por debajo de los 1 000 msnm, los que vivían entre los 1 000 y 2 999 msnm; y los factores de protección fueron el ser pobre extremo, el pobre no extremo, vivir en costa norte, sierra norte, sierra centro y sierra sur y selva. El 28,5% presentó retardo de crecimiento (adolescentes de 10 a 17 años. Los factores de riesgo del retardo de crecimiento fueron: vivir en áreas rurales, en la mayoría de los dominios geográficos excepto la costa sur, los niveles de pobreza (extrema y no extrema, los niveles de altitud (1 000 a 2 999 y más de 3 000 msnm. Conclusiones: El sobrepeso-obesidad es el problema de mayor magnitud en los adolescentes

  12. lnteracciones medicamentosas en pacientes bajo tratamiento con itraconazol para diferentes tipos de micosis

    Directory of Open Access Journals (Sweden)

    Adriana L. Fernández

    1999-12-01

    Full Text Available Algunos estudios han reportado un aumento en la frecuencia e importancia de las interacciones del itraconazol en pacientes bajo polifarmacia con fármacos que afectan el sistema enzimático de la citocromo P450 y modifican el metabolismo del azol. Con el propósito de determinar las características epidemiológicas, farmacológicas y clínicas de las interacciones medicamentosas en pacientes bajo tratamiento con itraconazol para diferentes tipos de micosis, se realizó un estudio descriptivo transversal retrospectivo en el que se analizaron 21 historias clínicas de pacientes atendidos en la Corporación para Investigaciones Biológicas durante el período 1994-1997. Entre la población estudiada, seis pacientes presentaron paracoccidioidomicosis; cinco, cromoblastomicosis; cuatro, histoplasmosis; cuatro, criptococosis, y dos, aspergilosis. En promedio, la dosis de itraconazol, la duración y el número de fármacos recibidos concomitantes fueron 223,8 mgldia, 44,3 semanas y 2,7 fármacos, respectivamente. En 10 individuos, se presentaron enfermedades de base y en 15, enfermedades concomitantes. Se documentó interacción medicamentosa (niveles no detectables o no terapéuticos de itraconazol en 18 pacientes, de los cuales 17 presentaban sospecha clínica y 14 sospecha paraclínica de interacción. El medicamento más frecuentemente involucrado con interacción fue la rifampicina, seguido de los inhibidores H, antiácidos y fenitoina. Similar a lo encontrado en otros estudios, la administración concomitante de estos fármacos con el itraconazol, reduce los niveles séricos de este último y altera la respuesta clínica al tratamiento. Este estudio es una aproximación inicial, aún no realizada en nuestra población, que permitirá establecer protocolos para el manejo y prevención de interacciones medicamentosas en pacientes en tratamiento con itraconazol y otros fármacos.

  13. 76 FR 30397 - Faribault Woolen Mill Company, Faribault, MN; Faribo Woolens, Inc., a Related Company of...

    Science.gov (United States)

    2011-05-25

    ... Woolen Mill Company, Faribault, MN; Faribo Woolens, Inc., a Related Company of Faribault Woolen Mill... December 9, 2009, applicable to workers of Faribault Woolen Mill Company, Faribault, Minnesota. The notice... Mill Company, a retail outlet store for the subject firm, Faribault Woolen Mill Company. Accordingly...

  14. 76 FR 9593 - Proclaiming Certain Lands, Reykers Acquisition, as an Addition to the Bay Mills Indian...

    Science.gov (United States)

    2011-02-18

    ..., as an Addition to the Bay Mills Indian Reservation for the Bay Mills Indian Community of Michigan..., more or less, to be added to the Bay Mills Indian Reservation for the Bay Mills Indian Community of... the land described below. The land was proclaimed to be an addition to the Bay Mills Indian...

  15. Secuelas del neurodesarrollo de recién nacidos prematuros de extremadamente bajo peso y de muy bajo peso a los dos años de edad, egresados de la Unidad de Cuidados Intensivos Neonatales del Hospital Nacional Edgardo Rebagliati Martins 2009-2014

    OpenAIRE

    Fernández Sierra, Carmen; Matzumura Kasano, Juan; Gutiérrez Crespo, Hugo; Zamudio Eslava, Luisa; Melgarejo García, Giannina

    2017-01-01

    Objetivo: Describir las secuelas del neurodesarrollo de los recién nacidos prematuros de extremadamente bajo peso y de muy bajo peso a los dos años de edad, egresados de la Unidad de Cuidados Intensivos Neonatales del Hospital Nacional Edgardo Rebagliati Martins. Materiales y métodos: Estudio descriptivo, retrospectivo, transversal en una población de 190 prematuros de extremadamente bajo peso y de muy bajo peso que nacieron durante enero 2009 a junio del 2014, egresados de la Unidad de Cuida...

  16. Pavement maintenance procedures with and without milling materials

    Directory of Open Access Journals (Sweden)

    Rafiqul A. Tarefder

    2016-01-01

    Full Text Available This study evaluates maintenance treatment followed by different Districts of New Mexico Department of Transportation (NMDOT. In addition, two case studies on the use of old pavement materials, called the “millings”, in maintenance projects are reported. Based on this study, it is observed that none of the Districts have a written procedure for maintenance work. Rather Districts rely on the experience of the maintenance crew for conducting maintenance projects. All Districts prefer to use chip seal for maintenance irrespective of distress conditions of the pavements. Patching and crack sealing are usually done before chip sealing to extend the life of the chip seals. Sand seal, scrub seal, and slurry seal projects are not done by District maintenance crews but by outside contractors. It is also observed that all Districts are interested in using millings in maintenance projects and most have already used millings in at least one maintenance project with some success and failure. Most of the Districts have used coarse fraction of millings in chip seal projects successfully. However, they failed to find a proper way to process the fine fractions of millings. Case Study I shows that fine millings can be used to construct thin overlay when mixed with emulsion in pug mill or hot drums. Case Study II concludes that fine millings can be used as fine/sand seal successfully following the same procedure and using the same equipment as chip seal. Keywords: Millings, Maintenance, Emulsion, Rutting, Pug-mill

  17. Preparation of iron sulphides by high energy ball milling

    DEFF Research Database (Denmark)

    Lin, R.; Jiang, Jianzhong; Larsen, R.K.

    1998-01-01

    The reaction of a powder mixture consisting of 50 a.% Fe and 50 a.% S during high energy ball milling has been studied by x-ray diffraction and Mossbauer spectroscopy. After around 19 h of milling FeS2 and FeS havebeen formed. By further milling the FeS compound becomes dominating and only Fe......S with an average crystallite size of about 10 nm was observed after milling times longer than 67 h. Mossbauer spectra obtained with applied fields show that the particles are antiferromagnetic or have a strongly canted spin structure....

  18. Model Predictive Control for an Industrial SAG Mill

    DEFF Research Database (Denmark)

    Ohan, Valeriu; Steinke, Florian; Metzger, Michael

    2012-01-01

    identication. When applied to MIMO systems we call this controller a MIMO-ARX based MPC. We use an industrial Semi-Autogenous Grinding (SAG) mill to illustrate the performance of this controller. SAG mills are the primary units in a grinding chain and also the most power consuming units. Therefore, improved...... control of SAG mills has the potential to signicantly improve eciency and reduce the specic energy consumption for mineral processes. Grinding circuits involving SAG mills are multivariate processes. Commissioning of a control system based on a classical single-loop controllers with logic is time...

  19. Engineering assessment of inactive uranium mill tailings

    International Nuclear Information System (INIS)

    1981-07-01

    The Grand Junction site has been reevaluated in order to revise the October 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Grand Junction, Colorado. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 1.9 million tons of tailings at the Grand Junction site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The eight alternative actions presented herein range from millsite and off-site decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II through VIII). Cost estimates for the eight options range from about $10,200,000 for stabilization in-place to about $39,500,000 for disposal in the DeBeque area, at a distance of about 35 mi, using transportation by rail. If transportation to DeBeque were by truck, the cost estimated to be about $41,900,000. Three principal alternatives for the reprocessing of the Grand Junction tailings were examined: (a) heap leaching; (b) treatment at an existing mill; and (c) reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $200/lb by heap leach and $150/lb by conventional plant processes. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery appears not to be economically attractive

  20. Engineering assessment of inactive uranium mill tailings

    Energy Technology Data Exchange (ETDEWEB)

    1981-07-01

    The Grand Junction site has been reevaluated in order to revise the October 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Grand Junction, Colorado. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 1.9 million tons of tailings at the Grand Junction site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The eight alternative actions presented herein range from millsite and off-site decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II through VIII). Cost estimates for the eight options range from about $10,200,000 for stabilization in-place to about $39,500,000 for disposal in the DeBeque area, at a distance of about 35 mi, using transportation by rail. If transportation to DeBeque were by truck, the cost estimated to be about $41,900,000. Three principal alternatives for the reprocessing of the Grand Junction tailings were examined: (a) heap leaching; (b) treatment at an existing mill; and (c) reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $200/lb by heap leach and $150/lb by conventional plant processes. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery appears not to be economically attractive.

  1. Nutritional impacts of different whole grain milling techniques : A review of milling practices and existing data

    NARCIS (Netherlands)

    Miller Jones, J.; Adams, J.; Harriman, C.; Miller, C.; Kamp, J.W. van der

    2015-01-01

    The majority of whole grain flour is produced using modern milling techniques, usually with steel rollers, in which a batch of grain is separated into multiple millstreams, sifted, and recombined. In some cases constituent millstreams are purchased and combined by a supplier or end user to achieve a

  2. Nutritional Impacts of Different Whole Grain Milling Techniques: A Review of Milling Practices and Existing Data

    NARCIS (Netherlands)

    Miller Jones, J.; Adams, J.; Harriman, C.; Miller, C.; Kamp, J.W. van der

    2015-01-01

    The majority of whole grain flour is produced using modern milling techniques, usually with steel rollers, in which a batch of grain is separated into multiple millstreams, sifted, and recombined. In some cases constituent millstreams are purchased and combined by a supplier or end user to achieve a

  3. Yang-Mills theory in Coulomb gauge; Yang-Mills-theorie in Coulombeichung

    Energy Technology Data Exchange (ETDEWEB)

    Feuchter, C.

    2006-07-01

    In this thesis we study the Yang-Mills vacuum structure by using the functional Schroedinger picture in Coulomb gauge. In particular we discuss the scenario of colour confinement, which was originally formulated by Gribov. After a short introduction, we recall some basic aspects of Yang-Mills theories, its canonical quantization in the Weyl gauge and the functional Schroedinger picture. We then consider the minimal Coulomb gauge and the Gribov problem of the gauge theory. The gauge fixing of the Coulomb gauge is done by using the Faddeev-Popov method, which enables the resolution of the Gauss law - the constraint on physical states. In the third chapter, we variationally solve the stationary Yang-Mills Schroedinger equation in Coulomb gauge for the vacuum state. Therefor we use a vacuum wave functional, which is strongly peaked at the Gribov horizon. The vacuum energy functional is calculated and minimized resulting in a set of coupled Schwinger-Dyson equations for the gluon energy, the ghost and Coulomb form factors and the curvature in gauge orbit space. Using the angular approximation these integral equations have been solved analytically in both the infrared and the ultraviolet regime. The asymptotic analytic solutions in the infrared and ultraviolet regime are reasonably well reproduced by the full numerical solutions of the coupled Schwinger-Dyson equations. In the fourth chapter, we investigate the dependence of the Yang-Mills wave functional in Coulomb gauge on the Faddeev-Popov determinant. (orig.)

  4. Technological system self-tuning when milling

    Directory of Open Access Journals (Sweden)

    Kozlov Aleksandr

    2017-01-01

    Full Text Available This paper reports the dynamics of the technological system during the milling of complex parts and the investigations of possibility in efficiency increase of a cutting process at the expense of conditions creation for a system self-tuning at which a general level of oscillations will not decrease in it. This can be achieved with a special damping device located on the machine screw gears supports. In this case, if the period of the wave on the cutting surface does not coincide with the period of natural oscillations, then there will be no resonance, and the level of oscillations will be much smaller.

  5. Duality in supersymmetric Yang-Mills theory

    Energy Technology Data Exchange (ETDEWEB)

    Peskin, M.E.

    1997-02-01

    These lectures provide an introduction to the behavior of strongly-coupled supersymmetric gauge theories. After a discussion of the effective Lagrangian in nonsupersymmetric and supersymmetric field theories, the author analyzes the qualitative behavior of the simplest illustrative models. These include supersymmetric QCD for N{sub f} < N{sub c}, in which the superpotential is generated nonperturbatively, N = 2 SU(2) Yang-Mills theory (the Seiberg-Witten model), in which the nonperturbative behavior of the effect coupling is described geometrically, and supersymmetric QCD for N{sub f} large, in which the theory illustrates a non-Abelian generalization of electric-magnetic duality. 75 refs., 12 figs.

  6. YANG-MILLS FIELDS AND THE LATTICE.

    Energy Technology Data Exchange (ETDEWEB)

    CREUTZ,M.

    2004-05-18

    The Yang-Mills theory lies at the heart of our understanding of elementary particle interactions. For the strong nuclear forces, we must understand this theory in the strong coupling regime. The primary technique for this is the lattice. While basically an ultraviolet regulator, the lattice avoids the use of a perturbative expansion. I discuss some of the historical circumstances that drove us to this approach, which has had immense success, convincingly demonstrating quark confinement and obtaining crucial properties of the strong interactions from first principles.

  7. Duality in supersymmetric Yang-Mills theory

    International Nuclear Information System (INIS)

    Peskin, M.E.

    1997-02-01

    These lectures provide an introduction to the behavior of strongly-coupled supersymmetric gauge theories. After a discussion of the effective Lagrangian in nonsupersymmetric and supersymmetric field theories, the author analyzes the qualitative behavior of the simplest illustrative models. These include supersymmetric QCD for N f c , in which the superpotential is generated nonperturbatively, N = 2 SU(2) Yang-Mills theory (the Seiberg-Witten model), in which the nonperturbative behavior of the effect coupling is described geometrically, and supersymmetric QCD for N f large, in which the theory illustrates a non-Abelian generalization of electric-magnetic duality. 75 refs., 12 figs

  8. Perturbative spacetimes from Yang-Mills theory

    Energy Technology Data Exchange (ETDEWEB)

    Luna, Andrés [School of Physics and Astronomy, University of Glasgow,Glasgow G12 8QQ, Scotland (United Kingdom); Monteiro, Ricardo [Theoretical Physics Department, CERN,Geneva (Switzerland); Nicholson, Isobel; Ochirov, Alexander; O’Connell, Donal [Higgs Centre for Theoretical Physics,School of Physics and Astronomy, The University of Edinburgh,Edinburgh EH9 3JZ, Scotland (United Kingdom); Westerberg, Niclas [Institute of Photonics and Quantum Sciences,School of Engineering and Physical Sciences, Heriot-Watt University,Edinburgh (United Kingdom); Higgs Centre for Theoretical Physics,School of Physics and Astronomy, The University of Edinburgh,Edinburgh EH9 3JZ, Scotland (United Kingdom); White, Chris D. [Centre for Research in String Theory,School of Physics and Astronomy, Queen Mary University of London,327 Mile End Road, London E1 4NS (United Kingdom)

    2017-04-12

    The double copy relates scattering amplitudes in gauge and gravity theories. In this paper, we expand the scope of the double copy to construct spacetime metrics through a systematic perturbative expansion. The perturbative procedure is based on direct calculation in Yang-Mills theory, followed by squaring the numerator of certain perturbative diagrams as specified by the double-copy algorithm. The simplest spherically symmetric, stationary spacetime from the point of view of this procedure is a particular member of the Janis-Newman-Winicour family of naked singularities. Our work paves the way for applications of the double copy to physically interesting problems such as perturbative black-hole scattering.

  9. Radiation exposure of uranium mill workers

    International Nuclear Information System (INIS)

    Jha, Giridhar; Saha, S.C.

    1982-01-01

    The uranium mill workers at Jaduguda were covered by a regular film badge service from 1969 onwards. Since the log normal plot is useful in interpreting occupational exposure, a statistical analysis of the radiation exposure data was attempted. Exposure data for each year has been plotted as cumulative percentage and worker's population with exposure levels in different class intervals. The plot for each of the year under investigation shows an occupational exposure distribution more or less consistent with the log normal distribution function. The analysis shows that more than 98% of radiation workers received less than 200 mrem (2 mSv). (author)

  10. Containment systems for uranium-mill tailings

    International Nuclear Information System (INIS)

    Hartley, J.N.; Buelt, J.L.

    1982-11-01

    Cover and liner systems for uranium mill tailings in the United States must satisfy stringent requirements regarding long-term stability, radon control, and radionuclide and hazardous chemical migration. The cover and liner technology discussed in this paper involves: (1) single and multilayer earthen cover systems; (2) asphalt emulsion radon barrier systems; and (3) asphalt, clay, and synthetic liner systems. These systems have been field tested at the Grand Junction, Colorado, tailings pile, where they have been shown to effectively reduce radon releases and radionuclide and chemical migration

  11. Chapter 2: uranium mines and mills

    International Nuclear Information System (INIS)

    O'Connell, W.J.

    1983-03-01

    This chapter will be included in a larger ASCE Committee Report. Uranium mining production is split between underground and open pit mines. Mills are sized to produce yellowcake concentrate from hundreds to thousands of tons of ore per day. Miner's health and safety, and environmental protection are key concerns in design. Standards are set by the US Mine Safety and Health Administration, the EPA, NRC, DOT, the states, and national standards organizations. International guidance and standards are extensive and based on mining experience in many nations

  12. Self-Improving CNC Milling Machine

    OpenAIRE

    Spilling, Torjus

    2014-01-01

    This thesis is a study of the ability of a CNC milling machine to create parts for itself, and an evaluation of whether or not the machine is able to improve itself by creating new machine parts. This will be explored by using off-the-shelf parts to build an initial machine, using 3D printing/rapid prototyping to create any special parts needed for the initial build. After an initial working machine is completed, the design of the machine parts will be adjusted so that the machine can start p...

  13. Domestic uranium mining and milling industry 1991

    International Nuclear Information System (INIS)

    1992-12-01

    This report was prepared by the Energy Information Administration to provide the Secretary of Energy with basic data and analyses for ninth annual determination of the viability of the domestic uranium mining and milling industry. A viability determination is required annually, for the years 1983 through 1992, by Section 170B of the Nuclear Regulatory Commission (NRC) Authorization Act of 1983, Public Law 97-415, which amend the Atomic Energy Act of 1954. Topics include: evolution of the U.S. uranium industry; nuclear power requirements and uranium industry projections; and attributes of industry viability

  14. Palmito de pejibaye (Bactris gasipaes cultivado bajo diferentes densidades de laurel (Cordia alliodora

    Directory of Open Access Journals (Sweden)

    Johnny Montenegro

    2001-01-01

    Full Text Available Se evalu6 el incremento en altura y gro- SOT de rebrotes, la altura del tallo dominante, la alliodoproducci6n de palmito y el numero de rebrotes diapOT cepa en plantaciones sin y bajo 2 poblacio- domines de laurel (92 y 370 arboles/ha y el efecto ofdel sombreamiento, en la zona Atlantica de Costa Rica. Se observ6 un mayor incremento en el diametro y la altura de los rebrotes en el monocultivo (P=0.0403, P=0.0033 respectiva- mente unicamente en los estadios iniciales de crecimiento. Una mayor altura del tallo princi- pal (P=0.0143se observ6 en la asociaci6n con haraltas densidades de arboles de laurel. EI nume- ro de rebrotes pOT cepa fue mayor (P=0.05 en maxilas parcelas sin la presencia de arboles. Las ma- yores producciones de palmito fueron encon- whetradas en el monocultivo y con 92 arboles ha/(P=O.O 117, determinandose un menor ren- dimiento con mayores niveles de intercepci6n de luz fotosinteticamente activa pOT parte del estrato arb6reo (r=0.68, P=0.0415. Los ingre- monosos fueron mayores en el tratamiento sin arbo- les, los cuales ejercieron un efecto negativo so- bre el rendimiento productivo del cultivo.

  15. COMPETENCIAS PERSONALES Y PROFESIONALES APLICADAS POR GERENTES BAJO ESCENARIOS DE INCERTIDUMBRE ECONÓMICA

    Directory of Open Access Journals (Sweden)

    Jenniz La Madriz

    2016-04-01

    Full Text Available En Venezuela, las compañías de seguro están operando en un entorno económico de incertidumbre, con reducción de ingresos económicos, inflación e inestabilidad financiera. Ante este escenario, la investigación tuvo como objetivo identificar las competencias que aplican los gerentes del área de seguros, para mantener el negocio posicionado en el mercado, tomando como muestra 22 gerentes. El tipo de investigación es de campo, sustentado en los diseños mixtos secuenciales Creswell (2003. Los resultados permitieron identificar que 47,4% de los gerentes encuestados, manifestaron que de las competencias personales que ponen en práctica en su lugar de trabajo, en contextos de incertidumbre económica, están la responsabilidad - comunicación efectiva - resolución de problemas - negociación y trabajar como parte de un grupo. En cuanto a las competencias profesionales, el 52,6% respondieron que está dedicada a gestionar personal, administrar recursos, planificar - organizar estrategias y rendir resultados, bajo escenarios de incertidumbre económica.

  16. Prospectiva de la cadena Productiva de mango bajo el enfoque dinámico

    Directory of Open Access Journals (Sweden)

    Juan Pablo Tribín-Rivera

    2014-01-01

    Full Text Available El propósito del presente documento de investigación, es relacionar los resultados del análisis prospectivo de la cadena productiva de mango en la Provincia del Tequendama – Cundinamarca por medio de dinámica de sistemas, con el fin de compararla desde distintos escenarios; mercado interno frente al mercado externo, y así poder determinar el escenario prospectivo más conveniente para los productores. De igual forma se proponen políticas que mejoren las condiciones de los productores de la región y se relaciona el modelo de simulación por dinámica de sistemas, que puede ser utilizado en diferentes cadenas productivas. La construcción del modelo de simulación se desarrolló con base en las experiencias adquiridas por medio de visitas de campo, recolección de información primaria y secundaria, y la colaboración de expertos que participan, directa o indirectamente, en dicha cadena productiva, enmarcadas bajo el proyecto de investigación titulado “Mercado prospectivo del mango: Comparativo entre el mercado interno y el mercado externo para la Provincia del Tequendama – Cundinamarca”

  17. La gestion bajo una cultura de calidad en Mexico: una verificacion empirica.

    Directory of Open Access Journals (Sweden)

    Rositas, J.

    2004-07-01

    Full Text Available El artículo presenta de entrada, enfoques administrativos que pueden ser englobados en el término “Gestión bajo una cultura de calidad” (GBCC, conocida internacionalmente como Total Quality Management [TQM], o simplemente Gestión de Calidad, citándose en seguida dos puntos de vista contrapunteados a nivel internacional en relación a este enfoque. Se presentan esfuerzos previos de consultores e implantadores mexicanos que, en base al método de casos y de generalizaciones empíricas de sus experiencias profesionales, consideran a la GBCC como una de las grandes tendencias y fuerzas de cambio en el siglo XXI. Se hace referencia a la escasez de investigaciones en las que se ponga a prueba estadísticamente los conceptos de teóricos, practicantes y consultores del área de la calidad. El autor propone y pone a prueba un modelo agregado de ecuaciones estructurales basado en datos de campo de su investigación de doctorado aportados por 45 empresas manufactureras mexicanas. El análisis de datos, realizado con los paquetes de software SPPS y AMOS, arroja coeficientes de regresión y de determinación, así como niveles de bondad del ajuste, altamente significativos. Al concluir, el autor sugiere estrategias adicionales para refinar futuros análisis de datos.

  18. Robot educativo de bajo costo que interpreta melodías en piano

    Directory of Open Access Journals (Sweden)

    Yeison Alberto Buitrago Suescún

    2013-01-01

    Full Text Available Presenta el diseño de un robot educacional que interpreta melodías en un piano. El propósito principal de este robot es servir como instrumento de prácticas en materias relacionadas con fundamentos de robótica, especialmente en los temas de análisis cinemático. Su control se implementó en el software Matlab, que es de uso común en las universidades. Los materiales y equipos utilizados para su implementación son de fáciladquisición y bajo costo, con el fin de que pueda ser replicado fácilmente por un estudiante. La aplicación del intérprete de melodías en un piano estimula a los estudiantes desde edades tempranas a incursionar en esta área tan importante.

  19. Afrontamiento, salud mental y felicidad bajo huelga y ocupación universitaria

    Directory of Open Access Journals (Sweden)

    Emilio Moyano-Díaz

    2017-01-01

    Full Text Available Se identificó la relación entre estrategias de enfrentamiento, salud mental (SM y felicidad en trabajadores de una universidad en huelga y ocupación estudiantil, de acuerdo con status laboral - académico o administrativo-, grado de concordancia con el movimiento estudiantil y sexo. Ciento sesenta y dos participantes respondieron a la Escala de felicidad subjetiva y estrategias de enfrentamiento, y a la Escala de Goldberg (GHQ12. Obtuvimos y discutimos: 1 el uso del humor está asociado con SM y la felicidad y ésta, a la reevaluación cognitiva, enfrentamiento religioso y bajo enfrentamiento de evitación, 2 mayor malestar por la ocupación peor SM, 3 no tener acceso a el espacio de trabajo está asociado con peor SM, más con iguales niveles de felicidad que los que tuvieron acceso, 4 el enfrentamiento varía de acuerdo con el status de académico o administrativo y con el sexo, 5 SM y felicidad no varían de acuerdo con el status académico, 6 aquellos que son pro-movimiento estudiantil presentan mejor SM que aquellos que no lo son.

  20. Modelo matemático de un sistema coordinado productor-comprador bajo el enfoque VMI

    Directory of Open Access Journals (Sweden)

    Fidel Torres

    2012-12-01

    Full Text Available En este trabajo se desarrolla un nuevo modelo matemático de un sistema coordinado productor-comprador mediante un acuerdo de inventarios administrados por el vendedor (VMI. El modelo propuesto considera el tiempo de fabricación del lote e incluye un esquema de sincronización entre el productor y el comprador que facilita la coordinación de la cadena de suministros. El análisis del modelo matemático de coordinación tiene en cuenta las tasas de producción y de demanda y los costos totales anuales de ordenar y mantener inventarios del productor y del comprador. El estudio es complementado por un análisis de sensibilidad que se enfoca sobre los efectos de las variaciones de los parámetros sobre algunas medidas de desempeño en el esquema coordinado VMI entre el productor y el comprador.  Finalmente, se deducen y verifican las condiciones analíticas bajo las cuales la implementación coordinada de VMI otorga beneficios al productor, al comprador y a la cadena de suministros. Los resultados muestran que es posible que el productor y el comprador obtengan beneficios en la implementación de VMI seleccionando una combinación apropiada de los parámetros usando el esquema de coordinación propuesto en una relación gana-gana.

  1. Evaluación de un cluster bajo agricultura protegida en México

    Directory of Open Access Journals (Sweden)

    Luz Evelia Padilla-Bernal

    2012-01-01

    Full Text Available El naciente cluster de tomate bajo agricultura protegida en Zacatecas enfrenta el reto de participar en los mercados globales de una manera sostenible; una respuesta viable para ello es elevar su capacidad de upgrading. En este trabajo se determina la relación entre la eficiencia colectiva en el upgrading del cluster. La información se obtuvo a través de un cuestionario aplicado a técnicos de las unidades de producción (UP, el cual se complementó con entrevistas a propietarios o gerentes, investigadores y funcionarios gubernamentales; posteriormente, se hizo una clasificación de las UP por nivel tecnológico aplicando la técnica de análisis de conglomerado con lo que se obtuvo el índice de eficiencia colectiva, el tipo de gobernanza de las cadenas de valor con las que se relacionan las agroempresas y los tipos de upgrading logrados. Se encontró que las economías externas fueron más dominantes que las acciones conjuntas; la eficiencia colectiva y el upgrading se encuentran positivamente relacionados; asimismo, se observó que el alto nivel tecnológico es condición necesaria, más no suficiente, para que las agroempresas permanezcan competitivas en el mercado global, por lo que se requiere elevar su capacidad de upgrading.

  2. Libertad negativa y libre desarrollo de la personalidad en la jurisprudencia constitucional colombiana: un análisis desde la perspectiva de John Stuart Mill y Thomas Hobbes

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Jaramillo

    2013-12-01

    Full Text Available El presente trabajo pretende demostrar que la Corte Constitucional colombiana confunde la noción de libre desarrollo de la personalidad con la noción de libertad negativa, debido a que en el fondo de su argumentación subyace el pensamiento de Thomas Hobbes; situación distinta sería si la Corte fundamentara sus sentencias en el concepto de libertad, desarrollado por John Stuart Mill, quien estaría más acorde con la noción de libre desarrollo de la personalidad bajo los presupuestos de un Estado Social y Democrático de Derecho fundado en la dignidad humana.

  3. Effect of milling time on microstructure and properties of Nano-titanium polymer by high-energy ball milling

    Science.gov (United States)

    Wang, Bo; Wei, Shicheng; Wang, Yujiang; Liang, Yi; Guo, Lei; Xue, Junfeng; Pan, Fusheng; Tang, Aitao; Chen, Xianhua; Xu, Binshi

    2018-03-01

    Nano-titanium (Nano-Ti) was prepared by high-energy ball milling from pure Ti power and grinding agents (Epoxy resin) at room temperature. The effect of milling time on structure and properties of Nano-Ti polymer were investigated systematically. The results show that high-energy ball milling is an effective way to produce Nano-Ti polymer. The dispersion stability and compatibility between Ti power and grinding agents are improved by prolonging the milling time at a certain degree, that is to say, the optimization milling time is 240 min. The particle size of Ti powder and the diffraction peaks intensity of Ti decrease obviously as the milling time increases due to the compression stress, shear friction and other mechanical forces are formed during ball milling. FT-IR result displays that the wavenumber of all the bands move to lower wavenumber after ball milling, and the epoxy ring is open. The system internal energy rises owing to the broken epoxy group and much more Nano-Ti is formed to promote the grafting reaction between Nano-Ti and epoxy resin. The results from TEM and XPS also prove that. And the grafting ration is maximum as the milling time is 240 min, the mass loss ratio is 17.53%.

  4. Determination of the Tapping Part Diameter of the Thread Mill

    Directory of Open Access Journals (Sweden)

    A. E. Dreval'

    2015-01-01

    Full Text Available Currently, there is a tendency to increase the proportion of thread milling operations, among other ways of tapping, which is associated with increasing number of CNC machines, flexibility and versatility of the process.Developments presently existing in the RF and used in the thread mills deal, mainly, with the thread milling cutter designs, to process internal and external thread with straight flutes made from high-speed steel.The paper presents a technique to calculate and select the initial design parameters, i.e. the external diameter of the tapping part of thread milling cutter, which is chosen as a basic computational design. The analysis of directories of tool companies containing foreign de-signs of solid thread end-milling cutters has shown that most of them rep-resent the thread cutter designs made of solid carbide. There are solid and interlocking side milling cutters, which use a tapping part both as a single-disk and as a multi-disk one; chip flutes are made to be both as direct and as screw; solid designs of cutters are made from carbide with a diameter of up to 20 ... 25 mm; thread cutters can be left- and right-hand cutting; Designs of the combined thread mills are proposed; internal channels are used for coolant supply.It is shown that the purpose of the external diameter of the tapping part of the thread mill should take into account the effect of the thread mill diameter on the milling process performance, precision of thread profile received, taper thread, tool strength, and the volume of flutes.The analysis has shown that when choosing the external diameter of the thread mill it worth taking its maximum diameter to improve the char-acteristics of the process under the restrictions imposed on the accuracy of the formed thread.

  5. Children's Rights, "die Antipadagogen," and the Paternalism of John Stuart Mill.

    Science.gov (United States)

    Nordenbo, Sven Erik

    1989-01-01

    Examines how John Stuart Mill would have viewed present-day educational liberalists' claims that children should be included in Mill's principle of individual liberty. Concludes that educational liberalists cannot rightly claim Mill as spokesman for their views. (KO)

  6. 76 FR 14105 - International Paper Company, Pineville Mill Industrial Packaging Group; Pineville, LA; Notice of...

    Science.gov (United States)

    2011-03-15

    ... Company, Pineville Mill Industrial Packaging Group; Pineville, LA; Notice of Negative Determination on..., Pineville Mill, Industrial Packaging Group, Pineville, Louisiana (subject facility). The Department's Notice... Company, Pineville Mill, Industrial Packaging Group, Pineville, Louisiana. Signed in Washington, DC, on...

  7. Reclamation plans at uranium mill tailings sites

    International Nuclear Information System (INIS)

    Abt, S.R.; Nelson, J.D.

    1990-01-01

    Long-term stability of waste impoundments is of concern because of the long time periods over which various types of waste may remain active. Over the past decade much technology has been developed specifically for reclamation of uranium mill tailings impoundments. Aspects of this technology will be discussed here and is presented as also being directly applicable to reclamation of industrial waste impoundments in general. The paper discusses Title I and Title II sites which represent two different generations in uranium tailings impoundment construction. The comparison between the two represent differences in philosophies as well as in impoundment type. Reclamation of uranium mill tailings impoundments in the U.S. is controlled by Federal legislation, which has set forth the regulatory framework for reclamation plan approval. Title I requirements govern government owned inactive sites and Title II requirements govern active tailings impoundments or those operated by private industries. While the Title I and Title II designation may result in a slightly different regulatory process, reclamation of uranium tailings sites has the same. Differences between Title I and Title II reclamation plans to achieve surface stability relate primarily to the embankment and surface covers. The differences in the cover designs result from site-specific conditions, rather than from differences in engineering approaches or the regulatory process. This paper discusses the site-specific conditions that affect the selection of cover designs, and provides a comparative example to illustrate the effect of this condition

  8. Grouting of uranium mill tailings piles

    International Nuclear Information System (INIS)

    Boegly, W.J. Jr.; Tamura, T.; Williams, J.D.

    1984-03-01

    A program of remedial action was initiated for a number of inactive uranium mill tailings piles. These piles result from mining and processing of uranium ores to meet the nation's defense and nuclear power needs and represent a potential hazard to health and the environment. Possible remedial actions include the application of covers to reduce radon emissions and airborne transport of the tailings, liners to prevent groundwater contamination by leachates from the piles, physical or chemical stabilization of the tailings, or moving the piles to remote locations. Conventional installation of liners would require excavation of the piles to emplace the liner; however, utilization of grouting techniques, such as those used in civil engineering to stabilize soils, might be a potential method of producing a liner without excavation. Laboratory studies on groutability of uranium mill tailings were conducted using samples from three abandoned piles and employing a number of particulate and chemical grouts. These studies indicate that it is possible to alter the permeability of the tailings from ambient values of 10 -3 cm/s to values approaching 10 -7 cm/s using silicate grouts and to 10 -8 cm/s using acrylamide and acrylate grouts. An evaluation of grouting techniques, equipment required, and costs associated with grouting were also conducted and are presented. 10 references, 1 table

  9. Yang-Mills-Chern-Simons supergravity

    International Nuclear Information System (INIS)

    Lue, H; Pope, C N; Sezgin, E

    2004-01-01

    N = (1, 0) supergravity in six dimensions admits AdS 3 x S 3 as a vacuum solution. We extend our recent results presented in Lue et al (2002 Preprint hep-th/0212323), by obtaining the complete N = 4 Yang-Mills-Chern-Simons supergravity in D = 3, up to quartic fermion terms, by S 3 group manifold reduction of the six-dimensional theory. The SU(2) gauge fields have Yang-Mills kinetic terms as well as topological Chern-Simons mass terms. There is in addition a triplet of matter vectors. After diagonalization, these fields describe two triplets of topologically-massive vector fields of opposite helicities. The model also contains six scalars, described by a GL(3, R)/SO(3) sigma model. It provides the first example of a three-dimensional gauged supergravity that can be obtained by a consistent reduction of string theory or M-theory and that admits AdS 3 as a vacuum solution. There are unusual features in the reduction from six-dimensional supergravity, owing to the self-duality condition on the 3-form field. The structure of the full equations of motion in N = (1, 0) supergravity in D = 6 is also elucidated, and the role of the self-dual field strength as torsion is exhibited

  10. Local saw mills save Velky Krtis

    International Nuclear Information System (INIS)

    Haluza, I.

    2006-01-01

    After the Bana Dolina coal mine has received its last state subsidy, the only major employer in the region will be the PRP saw mill. The unemployment rate is very high in the Velky Krtis region over 25%. Several agricultural and food processing companies have gone bankrupt and the Bana Dolina mine today only employs around 200 people. Few new jobs have been created. So far only furniture manufacturers from the Swedish company, Furni Finish, have promised the town they will open a new plant, where they may employ around 150. Another potential investment to be made by a Spanish producer of light components is still under negotiation, stated the mayor of Velky Krtis, Jozef Sauver. Should the Spanish company decide to come to the region, about 100 people could find a job at the former Liaz production halls. Currently, PRP is the largest employer in the region. Over the last 7 years, its owners have invested over 60 mil. Sk (1.58 mil. EUR) in the saw mill. Now they are preparing an 80 mil. Sk (2.10 mil. EUR) investment. The new business would process timber waste that is currently sold to the chipboard producer, Bucina DDD. In the future, the material could be used to produce energy. The town council are considering the construction of a new wood-fired heat plant that would use timber waste bought from PRP. (author)

  11. Semiclassical scattering in Yang-Mills theory

    International Nuclear Information System (INIS)

    Gould, T.M.; Poppitz, E.R.

    1994-01-01

    A classical solution to the Yang-Mills theory is given a semiclassical interpretation. The boundary value problem on a complex time contour which arises from the semiclassical approximation to multiparticle scattering amplitudes is reviewed and applied to the case of Yang-Mills theory. The solution describes a classically forbidden transition between states with a large average number of particles in the limit g→0. It dominates a transition probability with a semiclassical suppression factor equal to twice the action of the well-known BPST instanton. Hence, it is relevant to the problem of high-energy tunnelling. It describes transitions of unit topological charge for an appropriate time contour. Therefore, it may have a direct interpretation in terms of fermion-number violating processes in electroweak theory. The solution describes a transition between an initial state with parametrically fewer particles than the final state. Thus, it may be relevant to the study of semiclassical initial-state corrections in the limit of a small number of initial particles. The implications of these results for multiparticle production in electroweak theory are also discussed. (orig.)

  12. Health concerns in uranium mining and milling

    International Nuclear Information System (INIS)

    Archer, V.E.

    1981-01-01

    Mortality of uranium miners form both lung cancer and other respiratory diseases is strongly dependent on exposure to radon daughters, cigarette smoking and height. Lung cancer among 15 different mining groups (uranium, iron, led, zinc) was analyzed to determine what factors influence incidence and the induction-latent period. At low exposure or exposure rates, alpha radiation is more efficient in inducing lung cancer, producing an upward convex exposure-response curve. The induction-latent period is shortened by increased age at start of mining, by cigarette smoking and by high exposure rates. For a follow-up period of 20 to 25 years, the incidence increases with age at start of mining, with magnitude of exposure and with amount of cigarette smoking. Instead of extrapolating downward from high exposures to estimate risk at low levels, it is suggested that it might be more appropriate to use cancer rates associated with background radiation as the lowest point on the exposure-response curve. Although health risks are much greater in uranium mines than mills, there is some health risk in the mills from long-lived radioactive materials

  13. Quantum Yang–Mills Dark Energy

    Directory of Open Access Journals (Sweden)

    Roman Pasechnik

    2016-02-01

    Full Text Available In this short review, I discuss basic qualitative characteristics of quantum non-Abelian gauge dynamics in the non-stationary background of the expanding Universe in the framework of the standard Einstein–Yang–Mills formulation. A brief outlook of existing studies of cosmological Yang–Mills fields and their properties will be given. Quantum effects have a profound impact on the gauge field-driven cosmological evolution. In particular, a dynamical formation of the spatially-homogeneous and isotropic gauge field condensate may be responsible for both early and late-time acceleration, as well as for dynamical compensation of non-perturbative quantum vacua contributions to the ground state of the Universe. The main properties of such a condensate in the effective QCD theory at the flat Friedmann–Lemaítre–Robertson–Walker (FLRW background will be discussed within and beyond perturbation theory. Finally, a phenomenologically consistent dark energy can be induced dynamically as a remnant of the QCD vacua compensation arising from leading-order graviton-mediated corrections to the QCD ground state.

  14. Producción de biogás a partir de residuos organicos en biodigestores de bajo coste

    OpenAIRE

    Ferrer Martí, Ivet; Uggetti, Enrica; Poggio, Davide; Velo García, Enrique

    2015-01-01

    PRODUCCIÓN DE BIOGÁS A PARTIR DE RESIDUOS ORGANICOS EN BIODIGESTORES DE BAJO COSTE Ivet Ferrer*, Enrica Uggetti**, Davide Poggio***, Enric Velo**** Grup de Recerca en Cooperació i Desenvolupament Humà C. Jordi Girona, 31 08034 - Barcelona, Spain Phone: +34 93 401 64 63 Pàgina web: http://www.upc.edu/grecdh *, **, ***, **** Palabras clave: Digestión anaerobia; Biodigestor; Biogás; Energía; Fertilizante. RESUMEN ...

  15. The MediaMill TRECVID 2010 semantic video search engine

    NARCIS (Netherlands)

    Snoek, C.G.M.; van de Sande, K.E.A.; de Rooij, O.; Huurnink, B.; Gavves, E.; Odijk, D.; de Rijke, M.; Gevers, T.; Worring, M.; Koelma, D.C.; Smeulders, A.W.M.

    2010-01-01

    In this paper we describe our TRECVID 2010 video retrieval experiments. The MediaMill team participated in three tasks: semantic indexing, known-item search, and instance search. The starting point for the MediaMill concept detection approach is our top-performing bag-of-words system of TRECVID

  16. The MediaMill TRECVID 2012 semantic video search engine

    NARCIS (Netherlands)

    Snoek, C.G.M.; van de Sande, K.E.A.; Habibian, A.; Kordumova, S.; Li, Z.; Mazloom, M.; Pintea, S.L.; Tao, R.; Koelma, D.C.; Smeulders, A.W.M.

    2012-01-01

    In this paper we describe our TRECVID 2012 video retrieval experiments. The MediaMill team participated in four tasks: semantic indexing, multimedia event detection, multimedia event recounting and instance search. The starting point for the MediaMill detection approach is our top-performing

  17. High-Energy Ball-Milling of Alloys and Compounds

    International Nuclear Information System (INIS)

    Le Caer, G.; Delcroix, P.; Begin-Colin, S.; Ziller, T.

    2002-01-01

    After outlining some characteristics of high-energy ball-milling, we discuss selected examples of phase transformation and of alloy synthesis which focus on deviations from archetypal behaviours and throw light on the milling mechanisms. Some contributions of Moessbauer spectrometry to the characterization of ground materials are described.

  18. Metallurgical analysis of spalled work roll of hot strip mill

    International Nuclear Information System (INIS)

    Khan, M.M.; Khan, M.A.

    1993-01-01

    In this study failure analysis of four work roll of the Hot Strip Mill is carried out. The microstructure is correlated with the chemical composition of shell and roll-life. It was concluded that for the longer service of the roll, cementite, graphite and martensite should be balanced (as per working requirement of the mill). (author)

  19. John Stuart Mill on Freedom, Education, and Social Reform.

    Science.gov (United States)

    Carbone, Peter F.

    1983-01-01

    Examines the social philosophy of John Stuart Mill, emphasizing his views on freedom, education, and social reform. Considers Mill's individualism and reformism, the conflict between freedom and control that characterizes his work, and the importance of freedom and education. Suggests caution in drawing educational implications from his work. (DAB)

  20. MILLING MECHANICS OF MATERIALS ROLLED IN THICK LAYER

    Directory of Open Access Journals (Sweden)

    E. B. Lojechnikov

    2006-01-01

    Full Text Available Powder rolling conditions are systematized with the purpose of their compacting and milling. The generalized  condition of solid and free-flowing bulk material deformation is proposed in the  paper. The analytical solution of a stressed state of powder being shaped mechanically that ensures milling of its particles has been obtained.

  1. Releases of radioactivity from uranium mills and effluent treatment costs

    International Nuclear Information System (INIS)

    Witherspoon, J.P.; Sears, M.B.; Blanco, R.E.

    1977-01-01

    Airborne releases of radioactive materials from uranium milling to the environment consist of ore dust, yellowcake dust, tailings dust, and radon gas while the mill is active. After a mill has ceased operations, tailings may be stabilized to minimize or prevent airborne releases of radioactive particulates. However, radon gas will continue to be released in amounts inversely proportional to the degree of stabilization treatment (and expense). Liquid waste disposal is by evaporation and natural seepage to the ground beneath the tailings impoundment area. The release of radioactive materials (and potential radiation exposures) determines the majority of costs associated with minimizing the environmental impact of uranium milling. Radwaste treatments to reduce estimated radiation doses to individuals to 3 to 5% of those received with current milling practices are equivalent to $0.66 per pounds of U 3 O 8 and 0.032 mill per kWhr of electricity. This cost would cover a high efficiency reverse jet bag filter and high energy venturi scrubbers for dusts, neutralization of liquids, and an asphalt-lined tailings basin with a clay core dam to reduce seepage. In addition, this increased cost would cover stabilization of tailings, after mill closure, with a 1-in. asphalt membrane topped by 2 ft of earth and 0.5 ft of crushed rock to provide protection against future leaching and wind erosion. The cost of reducing the radiological hazards associated with uranium milling to this degree would contribute about 0.4% to the current total cost of nuclear power

  2. Some global charges in classical Yang-Mills theory

    International Nuclear Information System (INIS)

    Chrus'ciel, P.T.; Kondracki, W.

    1987-01-01

    Three classes of boundary conditions allowing the definition of a global field strength (''global color'') are presented. A definition of global color of the sources and of the Yang-Mills field is proposed. Some exact solutions of Yang-Mills equations with point sources and with ''topologically nontrivial electric color'' are presented

  3. 78 FR 38877 - Kraft Pulp Mills NSPS Review

    Science.gov (United States)

    2013-06-28

    ... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 60 [EPA-HQ-OAR-2012-0640] FRL-9829-3 RIN 2060-AR64 Kraft Pulp Mills NSPS Review AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule... comments on the May 23, 2013, proposed rule titled, ``Kraft Pulp Mills NSPS Review'' is being extended by...

  4. Attempted - to -Phase Conversion of Croconic Acid via Ball Milling

    Science.gov (United States)

    2017-05-18

    ARL-TN-0824 MAY 2017 US Army Research Laboratory Attempted α- to β-Phase Conversion of Croconic Acid via Ball Milling by...Laboratory Attempted α- to β-Phase Conversion of Croconic Acid via Ball Milling by Steven W Dean, Rose A Pesce-Rodriguez, and Jennifer A Ciezak...

  5. Accuracy of depth of cut in micro milling operations

    DEFF Research Database (Denmark)

    Bissacco, Giuliano

    since the magnitude of the cutting forces involved is reduced), which make mechanical micromachining by use of miniaturized tools troublesome or even impossible. This study deals with the use of a conventional 3 axis vertical milling machine equipped with a high speed attached spindle for micro milling...

  6. 33 CFR 117.225 - Yellow Mill Channel.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Yellow Mill Channel. 117.225 Section 117.225 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Connecticut § 117.225 Yellow Mill Channel. The...

  7. 33 CFR 117.800 - Mill Neck Creek.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Mill Neck Creek. 117.800 Section 117.800 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements New York § 117.800 Mill Neck Creek. The draw of the...

  8. Biota of uranium mill tailings near the Black Hills

    Science.gov (United States)

    Mark A. Rumble

    1982-01-01

    Reclamation" often implies the enhancement of the land as wildlife habitat or for other productive uses. However, there are situations where revegetation to stabilize erosion is the only desired goal. Uranium mining and mill sites may fall into this later category. Data pertaining to plant and animal components on revegetated uranium mill tailings was collected....

  9. 'Mill's Liberal Project and Defence of Colonialism from a Post ...

    African Journals Online (AJOL)

    It aims to show that Mill's views on colonial rule were largely informed by his principle of liberty which, in turn, was based on his qualitative utilitarianism. The driving force behind his colonialism, as with his work in general, was his unwavering belief in the importance of human progress and development. Mill never believed ...

  10. A QCD Model Using Generalized Yang-Mills Theory

    International Nuclear Information System (INIS)

    Wang Dianfu; Song Heshan; Kou Lina

    2007-01-01

    Generalized Yang-Mills theory has a covariant derivative, which contains both vector and scalar gauge bosons. Based on this theory, we construct a strong interaction model by using the group U(4). By using this U(4) generalized Yang-Mills model, we also obtain a gauge potential solution, which can be used to explain the asymptotic behavior and color confinement.

  11. The MediaMill TRECVID 2011 semantic video search engine

    NARCIS (Netherlands)

    Snoek, C.G.M.; van de Sande, K.E.A.; Li, X.; Mazloom, M.; Jiang, Y.; Koelma, D.C.; Smeulders, A.W.M.

    2011-01-01

    In this paper we describe our TRECVID 2011 video retrieval experiments. The MediaMill team participated in two tasks: semantic indexing and multimedia event detection. The starting point for the MediaMill detection approach is our top-performing bag-of-words system of TRECVID 2010, which uses

  12. Experience of Milled Peat Burning at Thermal Electric Power Plant

    Directory of Open Access Journals (Sweden)

    G. I. Zhikhar

    2013-01-01

    Full Text Available The paper presents extensive knowledge and practical experience on burning of milled peat in the boilers of thermal electric power plants in Belarus and Russia. The accumulated experience can be used for solution of problems pertaining to substitution of some types of fuel imported to Belarus by milled peat which is extracted at many fuel effective peat enterprises of the Republic.

  13. Uranium Mill Tailings Remedial Action Project surface project management plan

    International Nuclear Information System (INIS)

    1994-09-01

    This Project Management Plan describes the planning, systems, and organization that shall be used to manage the Uranium Mill Tailings Remedial Action Project (UMTRA). US DOE is authorized to stabilize and control surface tailings and ground water contamination at 24 inactive uranium processing sites and associated vicinity properties containing uranium mill tailings and related residual radioactive materials

  14. Simple grain mill boosts production and eases women's workload ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2013-01-11

    Jan 11, 2013 ... Simple grain mill boosts production and eases women's workload ... Farmers also like the design because, unlike other machines, it can be easily adjusted for different millet varieties and sizes. ... Local manufacturing. Discussions have begun with local entrepreneurs to manufacture the grain mill, which ...

  15. Energy conservation achievements by New Shorrock Mills, Ahmedabad

    International Nuclear Information System (INIS)

    Rawal, N.L.; Trivedi, R.M.

    1994-01-01

    The New Shorrock Mills, Ahmedabad is a textile mill manufacturing cloth. Managerial practices like energy auditing and energy conservation monitoring introduced to conserve energy are described. Various measures implemented to conserve energy in machines power; carding, winding, warping and sizing operations; auto looms and lighting power are described. Cost reduction in terms of rupees is given. (N.B.)

  16. Lupine protein enrichment by milling and electrostatic separation

    NARCIS (Netherlands)

    Wang, Jue; Zhao, Jun; Wit, De Martin; Boom, Remko M.; Schutyser, Maarten A.I.

    2016-01-01

    Lupine seeds are excellent source of plant protein. We here report on dry fractionation by combining milling and electrostatic separation providing an alternative to wet extraction of protein from lupine seeds. Relatively coarse milling was preferred as this provides sufficient detached protein

  17. Rough Mill Improvement Guide for Managers and Supervisors

    Science.gov (United States)

    Philip H. Mitchell; Jan Wiedenbeck; Bobby Ammerman; Bobby Ammerman

    2005-01-01

    Wood products manufacturers require an efficient recovery of product from lumber to remain profitable. A company's ability to obtain the best yield in lumber cut-up operations (i.e., the rough mill) varies according to the raw material, product, processing equipment, processing environment, and knowledge and skill of the rough mill's employees. This book...

  18. Recycling and reuse of wastewater from uranium mining and milling

    International Nuclear Information System (INIS)

    Xu Lechang; Gao Jie; Zhang Xueli; Wei Guangzhi; Zhang Guopu

    2010-01-01

    Uranium mining/milling process, and the sources, recycling/reuse approach and treatment methods of process wastewater are introduced. The wastewater sources of uranium mining and milling include effluent, raffinate, tailings water, mine discharge, resin form converted solution, and precipitation mother liquor. Wastewater can be recycled/reused for leachant, eluent, stripping solution,washing solution and tailings slurry. (authors)

  19. Jenis dan Status Konservasi Ikan Hiu yang Tertangkap di Tempat Pelelangan Ikan (TPI Labuan Bajo, Manggarai Barat, Flores

    Directory of Open Access Journals (Sweden)

    Ismail Syakurachman Alaydrus

    2016-03-01

    Full Text Available The study aimed to determine the types of sharks are caught, sold and conservation status in the fish auction place (TPI Labuan Bajo, West Manggarai, Flores, East Nusa Tenggara have been conducted in February and March 2014 in Labuan Bajo. The research method was the survey method and used Market Survey sampling techniques and identification by Rapid Assessment method. Descriptively analyzed data, displayed in the form of narration and a table. Based on the results of the study, found 114 individual sharks, 55 individual males, 59 females were classified into three orders, namely Orectolobiformes, Lamniformes, and Carcharhiniformes; 4 families that Carcharhinidae, Odontaspididae, Rhynchobatidae, and Ginglymostomatidae; 5 genera namely Carcharhinus, Triaenodon, Rhyncobatus, Prionace, and Rhizoprionodon and 9 types of sharks that Carcharhinus melanopterus, Triaenodon obesus, Carcharhinus limbatus, Carcharhinus taurus, Carcharhinus amblyrhynchos, Rhynchobatus australiae, Prionace glauca, Rhizoprionodon acutus, and Nebrius ferrugineus. Based on the state of conservation, shark found in Labuan Bajo TPI classified Vulnerable and Near Threatened, the dominant type of shark found is Carcharhinus melanopterus (91 fishes while the least was found is Rhynchobatus australiae, Prionace glauca, Rhizoprionodon acutus, and Nebrius ferrugineus (each 1 individual.

  20. The Influence of Milling on the Dissolution Performance of Simvastatin

    Directory of Open Access Journals (Sweden)

    Thomas Rades

    2010-12-01

    Full Text Available Particle size reduction is a simple means to enhance the dissolution rate of poorly water soluble BCS-class II and IV drugs. However, the major drawback of this process is the possible introduction of process induced disorder. Drugs with different molecular arrangements may exhibit altered properties such as solubility and dissolution rate and, therefore, process induced solid state modifications need to be monitored. The aim of this study was two-fold: firstly, to investigate the dissolution rates of milled and unmilled simvastatin; and secondly, to screen for the main milling factors, as well as factor interactions in a dry ball milling process using simvastatin as model drug, and to optimize the milling procedure with regard to the opposing responses particle size and process induced disorder by application of a central composite face centered design. Particle size was assessed by scanning electron microscopy (SEM and image analysis. Process induced disorder was determined by partial least squares (PLS regression modeling of respective X-ray powder diffractograms (XRPD and Raman spectra. Valid and significant quadratic models were built. The investigated milling factors were milling frequency, milling time and ball quantity at a set drug load, out of which milling frequency was found to be the most important factor for particle size as well as process induced disorder. Milling frequency and milling time exhibited an interaction effect on the responses. The optimum milling settings using the maximum number of milling balls (60 balls with 4 mm diameter was determined to be at a milling frequency of 21 Hz and a milling time of 36 min with a resulting primary particle size of 1.4 μm and a process induced disorder of 6.1% (assessed by Raman spectroscopy and 8.4% (assessed by XRPD, at a set optimization limit of < 2 μm for particle size and < 10% for process induced disorder. This optimum was tested experimentally and the process induced disorder

  1. Improved hydrogen sorption kinetics in wet ball milled Mg hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Li

    2011-05-04

    In this work, wet ball milling method is used in order to improve hydrogen sorption behaviour due to its improved microstructure of solid hydrogen materials. Compared to traditional ball milling method, wet ball milling has benefits on improvement of MgH{sub 2} microstructure and further influences on its hydrogen sorption behavior. With the help of solvent tetrahydrofuran (THF), wet ball milled MgH{sub 2} powder has much smaller particle size and its specific surface area is 7 times as large as that of dry ball milled MgH{sub 2} powder. Although after ball milling the grain size is decreased a lot compared to as-received MgH{sub 2} powder, the grain size of wet ball milled MgH{sub 2} powder is larger than that of dry ball milled MgH{sub 2} powder due to the lubricant effect of solvent THF during wet ball milling. The improved particle size and specific surface area of wet ball milled MgH{sub 2} powder is found to be determining its hydrogen sorption kinetics especially at relatively low temperatures. And it also shows good cycling sorption behavior, which decides on its industrial applicability. With three different catalysts MgH{sub 2} powder shows improved hydrogen sorption behavior as well as the cyclic sorption behavior. Among them, the Nb{sub 2}O{sub 5} catalyst is found to be the most effective one in this work. Compared to the wet ball milled MgH{sub 2} powder, the particle size and specific surface area of the MgH{sub 2} powder with catalysts are similar to the previous ones, while the grain size of the MgH{sub 2} with catalysts is much finer. In this case, two reasons for hydrogen sorption improvement are suggested: one is the reduction of the grain size. The other may be as pointed out in some literatures that formation of new oxidation could enhance the hydrogen sorption kinetics, which is also the reason why its hydrogen capacity is decreased compared to without catalysts. After further ball milling, the specific surface area of wet ball milled Mg

  2. The dispersion of fine chitosan particles by beads-milling

    Science.gov (United States)

    Rochima, Emma; Utami, Safira; Hamdani, Herman; Azhary, Sundoro Yoga; Praseptiangga, Danar; Joni, I. Made; Panatarani, Camellia

    2018-02-01

    This research aimed to produce fine chitosan particles from a crab shell waste by beads-milling method by two different concentration of PEG as dispersing agent (150 and 300 wt. %). The characterization was performed to obtain the size and size distribution, the characteristics of functional groups and the degree of deacetylation. The results showed that the chitosan fine particles was obtained with a milling time 120 minutes with the best concentration of PEG 400 150 wt. %. The average particle size of the as-prepared suspension is 584 nm after addition of acetic acid solution (1%, v/v). Beads milling process did not change the glucosamine and N-acetylglucosamine content on chitosan structure which is indicated by degree of deacetylation higher than 70%. It was concluded that beads milling process can be applied to prepare chitosan fineparticles by proper adjustment in the milling time, pH and dosage of dispersing agent.

  3. The influence of milling on the dissolution performance of simvastatin

    DEFF Research Database (Denmark)

    Zimper, Ulrike; Aaltonen, Jaakko; Krauel-Goellner, Karen

    2012-01-01

    properties such as solubility and dissolution rate and, therefore, process induced solid state modifications need to be monitored. The aim of this study was two-fold: firstly, to investigate the dissolution rates of milled and unmilled simvastatin; and secondly, to screen for the main milling factors......, as well as factor interactions in a dry ball milling process using simvastatin as model drug, and to optimize the milling procedure with regard to the opposing responses particle size and process induced disorder by application of a central composite face centered design. Particle size was assessed...... by scanning electron microscopy (SEM) and image analysis. Process induced disorder was determined by partial least squares (PLS) regression modeling of respective X-ray powder diffractograms (XRPD) and Raman spectra. Valid and significant quadratic models were built. The investigated milling factors were...

  4. Crystallization degree change of expanded graphite by milling and annealing

    International Nuclear Information System (INIS)

    Tang Qunwei; Wu Jihuai; Sun Hui; Fang Shijun

    2009-01-01

    Expanded graphite was ball milled with a planetary mill in air atmosphere, and subsequently thermal annealed. The samples were characterized by using X-ray diffraction spectroscopy (XRD), scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA). It was found that in the milling initial stage (less than 12 h), the crystallization degree of the expanded graphite declined gradually, but after milling more than 16 h, a recrystallization of the expanded graphite toke place, and ordered nanoscale expanded graphite was formed gradually. In the annealing initial stage, the non-crystallization of the graphite occurred, but, beyond an annealing time, recrystallizations of the graphite arise. Higher annealing temperature supported the recrystallization. The milled and annealed expanded graphite still preserved the crystalline structure as raw material and hold high thermal stability.

  5. Analytical Modelling Of Milling For Tool Design And Selection

    International Nuclear Information System (INIS)

    Fontaine, M.; Devillez, A.; Dudzinski, D.

    2007-01-01

    This paper presents an efficient analytical model which allows to simulate a large panel of milling operations. A geometrical description of common end mills and of their engagement in the workpiece material is proposed. The internal radius of the rounded part of the tool envelope is used to define the considered type of mill. The cutting edge position is described for a constant lead helix and for a constant local helix angle. A thermomechanical approach of oblique cutting is applied to predict forces acting on the tool and these results are compared with experimental data obtained from milling tests on a 42CrMo4 steel for three classical types of mills. The influence of some tool's geometrical parameters on predicted cutting forces is presented in order to propose optimisation criteria for design and selection of cutting tools

  6. Microbiological corrosion in low carbon steels; Corrosion microbiologica en aceros de bajo carbono

    Energy Technology Data Exchange (ETDEWEB)

    Medina-Custodio, O; Ortiz-Prado, A; Jacobo-Armendariz, V. H; Schouwenaars-Franssens, R [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)]. E-mail: medina_1979@yahoo.com; armandoo@servidor.unam.mx; vjacobo@dgapa.unam.mx; raf_schouweenaars@yahoo.com

    2009-01-15

    The Microbiologically Induced Corrosion affects several industries, such as oil industry where it is estimated that 20% to 30% pipes failures are related with microorganism. The chemical reactions generate ions transfer, this validate the use of electrochemical technique for its analysis. Coupons submerged in a nutritional medium with presence and absence of three different microorganisms during two periods, 48 hours and 28 days were studied. Polarization resistance (Rp) and Electrochemical Impedance Spectroscopy (EIS) techniques were applied to determine the corrosively of the systems. The results show a greater corrosive effect of abiotic systems, this indicates a microorganisms protection effect to the metal, opposite to the first hypothesis. This result was ratified observing surface coupons by using Scanning Electron Microscopy (SEM) technique. A possible mechanism based on Evans - Tafel graph is proposed to explain inhibitor microorganism effect. [Spanish] La corrosion microbiologica es un tipo comun de deterioro que afecta diversas industrias, una de ellas es la petrolera en la que se estiman que el 20% o 30% de fallas en las tuberias de trasporte de hidrocarburos es favorecida por microorganismos. Las reacciones quimicas que sustentan estos, generan transferencia de iones, lo que justifica el empleo de tecnicas electroquimicas para su analisis. En este trabajo, se estudiaron probetas de acero de bajo carbono SAE 1018, sumergidas en un medio nutritivo rico en cloruros en presencia y ausencia de tres diferentes cargas microbianas, en tiempos de exposicion de 48 horas y 28 dias. Se realizaron ensayos de resistencia a la polarizacion (Rp) y espectroscopia de impedancia electroquimica (EIS) para determinar el efecto corrosivo de los diferentes sistemas. Los resultados muestran que el medio abiotico causa el mayor efecto corrosivo, lo que indica un efecto protector de los microorganismos al metal contradiciendo la hipotesis inicialmente propuesta. La observacion

  7. Especies forrajeras utilizadas bajo silvo-pastoreo en el centro de Chiapas

    Directory of Open Access Journals (Sweden)

    R. Pinto

    2004-01-01

    Full Text Available Con el objetivo de conocer los usos, la composición química y degradabilidad ruminal de especies arbóreas y herbáceas del trópico mexicano, se desarrolló el presente trabajo en el Valle Central del estado de Chiapas, México. A través de entrevistas con productores se identificaron 14 leñosas y 7 herbáceas con mayor mención forrajera, así como sus múltiples usos. De éstas, el contenido de PC varió de medio a alto (5.8-28.7%, sobresaliendo las especies herbáceas, el contenido de MO fue muy similar entre especies (79.1 96.6% y los niveles más altos de FDN y FDA se encontraron en los frutos y las mayores concentraciones de FT en los follajes arbóreos. En términos de degradabilidad a 24 h de la PC, MS y MO, sobresalieron el follaje de G. americana y el fruto de E. cyclocarpum (P<0.05, en tanto, el follaje y fruto de A. pennatula, y el follaje de B. ungulata y M. hondurana presentaron los valores más bajos (P<0.05 de todas las especies en evaluación. Los parámetros de degradabilidad ruminal (a, b, a+b, c de los frutos fueron menores en comparación a los follajes. Sobresalió el fruto de E. cyclocarpum por su alto potencial de degradabilidad. Para el caso del follaje, excepto el género Acacia, todas las especies presentaron valores altos de degradabilidad ruminal de la MS

  8. El ideal de Yo bajo la tutela del Superyó.

    Directory of Open Access Journals (Sweden)

    María Paulina Mejía.

    1999-01-01

    Full Text Available Este texto se ocupará de analizar la naturaleza y función del Ideal del Yo, así como s relación con la instancia del superyó. Para tal fin se retomará el texto Introducción al Narcisismo, en el cual Freud introduce el Superyó con el nombre de conciencia moral y en el que, a su vez, explica el origen del ideal del Yo como el heredero de la ley y el nacimiento de del “juicio propio”. El ideal del Yo y el Superyó, ambos herederos del Complejo de Edipo, tienen en común que, si bien son resultado de la intervención de la ley y se valen del lenguaje, no se acogen a su estructura y a sus leyes, es decir, que no funcionan con la lógica de la falta y privilegian significantes unarios, que por estar solos no posibilitan la construcción de sentido.En síntesis, este artículo pretende demostrar cómo el Ideal del Yo, bajo la tutela del Superyó, logra darle respuestas al sujeto en relación al ser hombre y ser mujer pero del lado del goce. La lógica que se contrapone a la dimensión del lenguaje y el deseo, los cuales se estructuran a partir de la falta. El ser desde esta dimensión deja de ser una certeza para constituirse en una pregunta

  9. Estimación del tiempo de desarrollo de Lutzomyia evansi bajo condiciones experimentales

    Directory of Open Access Journals (Sweden)

    Claudia Martínez Suárez

    2012-01-01

    Full Text Available Objetivo: Estimar el tiempo promedio de desarrollo de Lutzomyia evansi. Materiales y métodos: Se inició una colonia de Lutzomyia evansi con individuos recolectados en la zona urbana de la ciudad de Sincelejo (Colombia. La colonia fue mantenida en el laboratorio durante tres generaciones filiales bajo condiciones experimentales promedio de 26ºC de temperatura y 94% de humedad relativa. Resultados: La duración del desarrollo de Lutzomyia evansi fue de 36 a 45 días. El tiempo requerido para el desarrollo de los huevos fue en promedio de 6,75 días (rango de 6 a 8 días. La duración en promedio de los diferentes estadios larvales fue 5,75 días en larvas de primer estadio (rango de 5 a 8 días, 5,75 días en larvas de segundo estadio (rango de 4 a 7 días, 5 días en larvas de tercer estadio (rango de 4 a 7 días y 7 días en larvas de cuarto estadio (rango de 6 a 8 días. En la fase de pupa, la duración en promedio fue de 9,75 días (rango de 7 a 17 días. Conclusiones: El tiempo promedio requerido para el desarrollo de Lutzomyia evansi, comprendido desde la alimentación sanguínea de la hembra madre hasta la emergencia del adulto, es de 40 días.

  10. Condiciones de trabajo, fatiga laboral y bajo peso al nacer en vendedoras ambulantes

    Directory of Open Access Journals (Sweden)

    Hernández-Peña Patricia

    1999-01-01

    Full Text Available Objetivo. Este trabajo tipifica las condiciones demográficas, socioeconómicas, laborales, de fatiga laboral y daño reproductivo en una población femenina en edad fértil que trabaja en la venta ambulante en las calles de la Ciudad de México. Material y métodos. Se entrevistaron 426 vendedoras ambulantes. Se describió a la población entrevistada y se exploró la asociación de los componentes de la fatiga laboral con el bajo peso al nacer (BPN mediante regresión logística, en un subgrupo de mujeres que laboraron en la venta ambulante durante su última gestación. Resultados. De las mujeres entrevistadas, 56% realiza jornadas de trabajo superiores a las 48 horas semanales, 87% carece de seguridad social y 68% tiene estudios no mayores de primaria. El riesgo de presentar BPN se eleva cuando se carece de control sobre la cantidad de mercancía a vender (RM 6.5, IC95% 1.3-31, se venden artículos de ocasión como refacciones y ornamentos (RM 6.3, IC95% 1.5-26, se exhibe la mercancía sobre el piso o se carga para su venta (RM 7.7, IC95% 1.8-32, y cuando los recursos para instalar el puesto por primera vez no proceden de la red social de apoyo de la vendedora (RM 7.4, IC95% 1.2-44. Conclusiones. Estos resultados contribuyen a identificar a las vendedoras con mayor riesgo de presentar un hijo con BPN, y sugerir medidas preventivas.

  11. CONTAMINACIÓN DEL SUELO EN LA ZONA MINERA DE RASGATÁ BAJO (TAUSA. MODELO CONCEPTUAL

    Directory of Open Access Journals (Sweden)

    María Eugenia Guerrero Useda

    2016-01-01

    Full Text Available Se desarrolló un modelo conceptual del riesgo de contaminación físico química del suelo en la vereda Rasgatá Bajo. Esta vereda del municipio de Tausa, en Cundinamarca, está en la zona limítrofe del declarado por la Corporación Autónoma Regional de Cundinamarca en 2009, Distrito Regional de Manejo Integrado de los Recursos Naturales Renovables Páramo Guargua y Laguna Verde. La vocación productiva local por tradición ha sido el cultivo de papa (Solanum tuberosum L y la extracción y transformación de arcilla y carbón, actividades con graves impactos sobre el suelo, por lo que el objetivo del proyecto fue identificar y evaluar la condición de este recurso en territorios donde confluyen actividades de extracción y transformación de arcilla y carbón. Se siguió un enfoque metodológico mixto que combinó investigación documental, observaciones in situ y medición de características físico químicas para determinar las fuentes y tipos de contaminantes con riesgo de afectar el suelo aledaño a las faenas mineras y con impactos toxicológicos para las personas, la fauna y la flora. Los datos obtenidos aportarán al rediseño y evaluación de los planes de manejo ambiental local.

  12. Estudio de materiales adsorbentes de bajo costo para remover Cr(VI de efluentes acuosos

    Directory of Open Access Journals (Sweden)

    Claudia Vargas-Niño

    2011-01-01

    Full Text Available El presente estudio muestra el enorme potencial de dos tipos de sólidos diferentes, una alúmina comercial y un material producto del compostaje, en la adsorción/eliminación de Cr(VI en medio acuoso, en concentraciones de metal equivalentes a las halladas en aguas residuales provenientes de industrias en Colombia. Ambos materiales mostraron propiedades importantes para la eliminación de Cr(VI, considerándose de mayor relevancia el compost por ser un material de bajo costo. Se establecieron las condiciones óptimas para la adsorción de cromo sobre alúmina y sobre compost. Para la alúmina: concentración inicial de Cr(VI = 10 mgL-1, volumen de solución por masa de adsorbente = 100 mL/g, pH = 2,0, tiempo de equilibrio = 1 hora, y agitación = 150 rpm. Para el compost: concentración inicial de Cr(VI = 3 mg L-1, volumen de solución por masa de adsorbente = 50 mL/g, pH = 2.5, tiempo de equilibrio = 3 horas, y agitación = 150 rpm. Además, los resultados mostraron que las propiedades de adsorción del compost se pueden mejorar mediante la adición de pequeñas cantidades de alúmina. El estudio permitió seleccionar al compost como un material promisorio para procedimientos de remediación de aguas residuales que contienen cromo (VI dentro de una política de manejo y uso de residuos sólidos con el objeto de minimizar el impacto ambiental de éstos.

  13. Desarrollo post-embrionario de Microcerella acrydiorum (Diptera: Sarcophagidae bajo condiciones de laboratorio

    Directory of Open Access Journals (Sweden)

    Andrea V. DE ARRIBA

    2006-01-01

    Full Text Available Se estudió el desarrollo post-embrionario de Microcerella acrydiorum (Weyenbergh bajo condiciones controladas (temperatura media: 27,50 ± 2,60°C, humedad relativa media: 36,47 ± 8,10% y fotoperíodo artificial: 14 horas luz y se determinaron los siguientes parámetros biológicos: tiempo de desarrollo larval y pupal, período de prelarviposición, supervivencia y razón sexual. El tiempo de desarrollo larval fue de 3,78 ± 0,81 días, el tiempo de desarrollo pupal de 8,63 ± 1,45 días, el período de prelarviposición de 18,25 ± 4,06 días y el ciclo completo fue de 30,66 días. La probabilidad de supervivencia al estado adulto fue de 75,80%. Al menos el 98,73% de las larvas lograron formar el pupario, de estas el 85,81% completó la metamorfosis y transformadas en adultos abandonaron los puparios; sólo el 89,47% de los adultos emergió a la superficie. El estado pupal resultó ser el más susceptible, concentrando casi el 58% de las muertes. La proporción de sexos no se apartó de la relación esperada 1:1 (p > 0,15.

  14. Vivencia infantil del clima de violencia y represión bajo dictadura

    Directory of Open Access Journals (Sweden)

    Salomón Magendzo

    2000-01-01

    Full Text Available Esta investigación parte del supuesto de que el régimen dictatorial chileno no sólo afectó a los niños y niñas cuyos familiares fueron directamente detenidos, torturados y/o desaparecidos, sino también a aquellos que sólo tuvieron que vivir el clima de represión masiva, especialmente en los barrios de bajos recursos. La mayor parte de los jóvenes entrevistados recordaron espontáneamente el clima caracterizado por protestas de la población y represión intensa durante el período 1983-1986. Las entrevistas fueron analizadas a través de un método inductivo, sin categorías preestablecidas. Partiendo del relato de los propios jóvenes sobre su infancia, se identificaron los siguientes ejes que permitieron ordenar la información: la descripción del clima de violencia y represión; el fenómeno de la vivencia emocional de dicho clima como niños y niñas; las reacciones familiares frente al referido clima; la visión de la infancia, la familia y la población que los entrevistados perciben que tuvieron como niños y niñas; las consecuencias del haber vivido en un clima de violencia y represión a nivel personal y social; y la relación de los jóvenes con sus recuerdos, así como la visión actual que tienen de su población. El artículo da cuenta de lo encontrado en los ejes mencionados para luego extenderse a una discusión acerca de los resultados.

  15. Uso eficiente del agua para el cultivo de rosa cv. Freedom bajo invernadero

    Directory of Open Access Journals (Sweden)

    John J. Arévalo-H

    2013-08-01

    Full Text Available Determinar el requerimiento de agua y el momento adecuado de distribución, es un factor fundamental para el cultivo de flores. El objetivo del presente trabajo fue determinar el efecto de la aplicación de tres láminas de riego sobre el desarrollo y producción del cultivo de la Rosa cv. Freedom, bajo invernadero. El experimento se realizó con tres láminas de riego en un cultivo de rosa (Rosa spp. cv. Freedom. Se analizó el crecimiento de los tallos florales, la vida en florero, la producción y la eficiencia en el uso del agua. Los tratamientos se basaron en tres niveles de evapotranspiración de cultivo (ETc (70, 80 y 100%. Durante el estudio, el cultivo se mantuvo en producción constante. Se aplicaron 384,87, 254,25 y 218,97 m³ correspondiente a 100, 80 e 70% de ETc respectivamente, significando un ahorro de agua de 14,0 y 21,8% en el 80 e 70% de ETc respectivamente. El coeficiente de cultivo (Kc vario entre 0,58 y 1,65, con una media de 1,13. No se encontraron diferencias en la producción. Las curvas de crecimiento presentaron incremento continuo, con ajuste al modelo logístico. El 70% de ETc presentó la mayor eficiencia en el uso del agua, con 185 tallos m-3. La conservación media de los tallos florales fue de 12 a 15 días. La mayor causa de pérdida fue la deshidratación, que inició en el día 11, comportamiento normal del tallo floral.

  16. 77 FR 43369 - Alumax Mill Products, Inc. Doing Business as Alcoa Mill Products Texarkana a Subsidiary of Alcoa...

    Science.gov (United States)

    2012-07-24

    ... Products, Inc., a subsidiary of Alcoa, Inc. The intent of the Department's certification is to properly... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,149] Alumax Mill Products, Inc. Doing Business as Alcoa Mill Products Texarkana a Subsidiary of Alcoa, Inc. Nash, TX; Amended...

  17. Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data

    Directory of Open Access Journals (Sweden)

    Paulino José García Nieto

    2016-01-01

    Full Text Available Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC in combination with multivariate adaptive regression splines (MARS technique. This optimization mechanism involved the parameter setting in the MARS training procedure, which significantly influences the regression accuracy. Therefore, an ABC–MARS-based model was successfully used here to predict the milling tool flank wear (output variable as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc. Regression with optimal hyperparameters was performed and a determination coefficient of 0.94 was obtained. The ABC–MARS-based model's goodness of fit to experimental data confirmed the good performance of this model. This new model also allowed us to ascertain the most influential parameters on the milling tool flank wear with a view to proposing milling machine's improvements. Finally, conclusions of this study are exposed.

  18. Effect of kernel size and mill type on protein, milling yield, and baking quality of hard red spring wheat

    Science.gov (United States)

    Optimization of flour yield and quality is important in the milling industry. The objective of this study was to determine the effect of kernel size and mill type on flour yield and end-use quality. A hard red spring wheat composite sample was segregated, based on kernel size, into large, medium, ...

  19. Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data.

    Science.gov (United States)

    García Nieto, Paulino José; García-Gonzalo, Esperanza; Ordóñez Galán, Celestino; Bernardo Sánchez, Antonio

    2016-01-28

    Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combination with multivariate adaptive regression splines (MARS) technique. This optimization mechanism involved the parameter setting in the MARS training procedure, which significantly influences the regression accuracy. Therefore, an ABC-MARS-based model was successfully used here to predict the milling tool flank wear (output variable) as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc . Regression with optimal hyperparameters was performed and a determination coefficient of 0.94 was obtained. The ABC-MARS-based model's goodness of fit to experimental data confirmed the good performance of this model. This new model also allowed us to ascertain the most influential parameters on the milling tool flank wear with a view to proposing milling machine's improvements. Finally, conclusions of this study are exposed.

  20. Nanocrystalline TiAl powders synthesized by high-energy ball milling: effects of milling parameters on yield and contamination

    International Nuclear Information System (INIS)

    Bhattacharya, Prajina; Bellon, Pascal; Averback, Robert S.; Hales, Stephen J.

    2004-01-01

    High-energy ball milling was employed to produce nanocrystalline Ti-Al powders. As sticking of the powders can be sufficiently severe to result in a near zero yield, emphasis was placed on varying milling conditions so as to increase the yield, while avoiding contamination of the powders. The effects of milling parameters such as milling tools, initial state of the powders and addition of process control agents (PCA's) were investigated. Cyclohexane, stearic acid and titanium hydride were used as PCA's. Milling was conducted either in a Cr-steel vial with C-steel balls, or in a tungsten carbide (WC) vial with WC balls, using either elemental or pre-alloyed powders. Powder samples were characterized using X-ray diffraction, scanning and transmission electron microscopy. In the absence of PCA's mechanical alloying in a WC vial and attrition milling in a Cr-steel vial were shown to lead to satisfactory yields, about 65-80%, without inducing any significant contamination of the powders. The results suggest that sticking of the powders on to the milling tools is correlated with the phase evolution occurring in these powders during milling

  1. Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data

    Science.gov (United States)

    García Nieto, Paulino José; García-Gonzalo, Esperanza; Ordóñez Galán, Celestino; Bernardo Sánchez, Antonio

    2016-01-01

    Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combination with multivariate adaptive regression splines (MARS) technique. This optimization mechanism involved the parameter setting in the MARS training procedure, which significantly influences the regression accuracy. Therefore, an ABC–MARS-based model was successfully used here to predict the milling tool flank wear (output variable) as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc. Regression with optimal hyperparameters was performed and a determination coefficient of 0.94 was obtained. The ABC–MARS-based model's goodness of fit to experimental data confirmed the good performance of this model. This new model also allowed us to ascertain the most influential parameters on the milling tool flank wear with a view to proposing milling machine's improvements. Finally, conclusions of this study are exposed. PMID:28787882

  2. Nonperturbative aspects of Yang-Mills theory

    International Nuclear Information System (INIS)

    Schleifenbaum, Wolfgang

    2008-01-01

    The subject of this thesis is the theory of strong interactions of quarks and gluons, with particular emphasis on nonperturbative aspects of the gluon sector. Continuum methods are used to investigate in particular the confinement phenomenon. Confinement which states that the elementary quarks and gluons cannot be detected as free particles requires an understanding of large-scale correlations. In perturbation theory, only short-range correlations can be reliably described. A nonperturbative approach is given by the set of integral Dyson Schwinger equations involving all Green functions of the theory. A solution for the gluon propagator is obtained in the infrared and ultraviolet asymptotic limits. In chapter 1, redundant degrees of freedom of the Yang Mills gauge theory are removed by fixing the Weyl and Coulomb gauge prior to quantization. The constrained quantization in the Dirac bracket formalism is then performed explicitly to produce the quantized Yang Mills Hamiltonian. The asymptotic infrared limits of Coulomb gauge correlation functions are studied analytically in chapter 2 in the framework of the Gribov Zwanziger confinement scenario. The Coulomb potential between heavy quarks as part of the Yang Mills Hamiltonian is calculated in this limit. A connection between the infrared limits of Coulomb and Landau gauge is established. The Hamiltonian derived paves the way in chapter 3 for finding the Coulomb gauge vacuum wave functional by means of the variational principle. Numerical solutions for the propagators in this vacuum state are discussed and seen to reproduce the anticipated infrared limit. The discussion is extended to the vertex functions. The effect of the approximations on the results is examined. Chapter 4 is mainly devoted to the ultraviolet behavior of the propagators. The discussion is issued in both Coulomb and Landau gauge. A nonperturbative running coupling is defined and calculated. The ultraviolet tails of the variational solutions from

  3. Nonperturbative aspects of Yang-Mills theory

    Energy Technology Data Exchange (ETDEWEB)

    Schleifenbaum, Wolfgang

    2008-07-01

    The subject of this thesis is the theory of strong interactions of quarks and gluons, with particular emphasis on nonperturbative aspects of the gluon sector. Continuum methods are used to investigate in particular the confinement phenomenon. Confinement which states that the elementary quarks and gluons cannot be detected as free particles requires an understanding of large-scale correlations. In perturbation theory, only short-range correlations can be reliably described. A nonperturbative approach is given by the set of integral Dyson Schwinger equations involving all Green functions of the theory. A solution for the gluon propagator is obtained in the infrared and ultraviolet asymptotic limits. In chapter 1, redundant degrees of freedom of the Yang Mills gauge theory are removed by fixing the Weyl and Coulomb gauge prior to quantization. The constrained quantization in the Dirac bracket formalism is then performed explicitly to produce the quantized Yang Mills Hamiltonian. The asymptotic infrared limits of Coulomb gauge correlation functions are studied analytically in chapter 2 in the framework of the Gribov Zwanziger confinement scenario. The Coulomb potential between heavy quarks as part of the Yang Mills Hamiltonian is calculated in this limit. A connection between the infrared limits of Coulomb and Landau gauge is established. The Hamiltonian derived paves the way in chapter 3 for finding the Coulomb gauge vacuum wave functional by means of the variational principle. Numerical solutions for the propagators in this vacuum state are discussed and seen to reproduce the anticipated infrared limit. The discussion is extended to the vertex functions. The effect of the approximations on the results is examined. Chapter 4 is mainly devoted to the ultraviolet behavior of the propagators. The discussion is issued in both Coulomb and Landau gauge. A nonperturbative running coupling is defined and calculated. The ultraviolet tails of the variational solutions from

  4. NOAA ESRI Geotiff - 5m Bathymetry around Bajo de Cico, Puerto Rico, Project NF-07-06, 2007, UTM 19 NAD 83

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains an ESRI Geotiff with 5 meter cell size representing the bathymetry of selected portions of seafloor around Bajo De Cico in Puerto Rico, derived...

  5. NOAA TIFF Image - 1 m Backscatter Mosaic of Bajo de Cico, Puerto Rico, Project NF-07-06, 2007, UTM 19 NAD83 (NCEI Accession 0131853)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a 1 meter resolution backscatter mosaic of Bajo de Cico off the coast of western Puerto Rico, collected using a Kongsberg EM 1002 (95 kHz)...

  6. NOAA ESRI Grid - 3m Bathymetry around Bajo de Cico, Puerto Rico, Project NF-07-06, 2007, UTM 19 NAD 83

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains an ESRI Grid with 3 meter cell size representing the bathymetry of selected portions of seafloor around Bajo De Cico in Puerto Rico, derived...

  7. NOAA ESRI Grid - 5m Bathymetry around Bajo de Cico, Puerto Rico, Project NF-07-06, 2007, UTM 19 NAD 83

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains an ESRI Grid with 5 meter cell size representing the bathymetry of selected portions of seafloor around Bajo De Cico in Puerto Rico, derived...

  8. NOAA ESRI Geotiff - 3m Bathymetry around Bajo de Cico, Puerto Rico, Project NF-07-06, 2007, UTM 19 NAD 83

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains an ESRI Geotiff with 3 meter cell size representing the bathymetry of selected portions of seafloor around Bajo De Cico in Puerto Rico, derived...

  9. NOAA ESRI Geotiff - 10m Bathymetry around Bajo de Cico, Puerto Rico, Project NF-07-06, 2007, UTM 19 NAD 83

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains an ESRI Geotiff with 10 meter cell size representing the bathymetry of selected portions of seafloor around Bajo De Cico in Puerto Rico,...

  10. 76 FR 2409 - Proclaiming Certain Lands, Lot 32 Acquisition, as an Addition to the Bay Mills Indian Reservation...

    Science.gov (United States)

    2011-01-13

    ..., as an Addition to the Bay Mills Indian Reservation for the Bay Mills Indian Community of Michigan..., more or less, to be added to the Bay Mills Indian Reservation for the Bay Mills Indian Community of... Mills Indian Reservation and part of the Bay Mills Indian Community of Michigan for the exclusive use of...

  11. Eden Mills Community Hall energy audit prepared for Eden Mills going carbon neutral

    Energy Technology Data Exchange (ETDEWEB)

    Lay, R.; Aussant, C. [Enermodal Engineering Ltd., Kitchener, ON (Canada)

    2009-04-22

    This paper described an energy audit conducted as part of the Eden Mills going carbon neutral project during the spring and summer of 2008. The audit included an inspection of the Eden Mills community hall with a special focus on the building's mechanical system and building envelope. A blower door test was performed to depressurize the building and to measure the airtightness of the building envelope. An energy simulation model was then used to estimate energy use according to the buildings functions and components. Recommendations included the addition of wall insulation, the replacement of some windows, and improved return air ducting and warm air distribution systems. Various new thermostat control systems were also recommended, as well as the use of wood pellets in one of the hall's 2 furnaces. 20 tabs., 28 figs.

  12. Riesgos y consecuencias de las prácticas sexuales en adolescentes bajo los efectos de alcohol y otras drogas

    Directory of Open Access Journals (Sweden)

    Guillermo Castaño Pérez

    2013-03-01

    Full Text Available Introducción: la sexualidad, y el consumo de alcohol y drogas en los adolescentes, figuran en la actualidad como uno de los asuntos con mayor prioridad para la salud pública. La preocupación radica en reducir los riesgos de infecciones de transmisión sexual, el virus de la inmunodeficiencia humana y los embarazos tempranos no deseados. Objetivo: analizar las prácticas sexuales bajo el efecto de alcohol y otras drogas, y los riesgos que esto implica, en los adolescentes de la ciudad de Medellín. Métodos: la muestra se estableció mediante método probabilístico aleatorio y por conglomerados. El universo correspondió al número total de estudiantes matriculados en colegios públicos y privados de la ciudad de Medellín de 8vo., 9no., 10mo. y 11no. grados, en el año 2010 (91 857 estudiantes con edades comprendidas entre los 14 y 17 años. El tamaño muestral incluido fue de 955 estudiantes usando un intervalo de confianza de 95. Se diseñó un estudio descriptivo, transversal para conocer las prácticas sexuales bajo el efecto de alcohol u otras drogas, y los riesgos que corren los adolescentes. Se establecieron frecuencias, porcentajes y asociaciones estadísticas con el programa SPSS, versión 19.0 Resultados: consumir alcohol u otras drogas y tener prácticas sexuales presenta una asociación estadística significativa (p= 0,000. El 62,4 % de los adolescentes que han consumido una sustancia psicoactiva, han tenido relaciones sexuales, frente a un 29,4 % que, habiendo consumido alcohol y otras drogas, no lo han hecho. El alcohol es la droga más usada (79,8 %. Le siguen la marihuana (31,83 %, poppers (8,97 %, la cocaína (7,75 % y el éxtasis (5,71 %. Las prácticas sexuales más frecuentes bajo el efecto de sustancias psicoactivas son las exploratorias (manoseo, caricias, para un 71,02 %, seguida de la penetrativa vaginal (63,67 %, el sexo oral (45,30 % y la masturbación (19,59 %. De los adolescentes que tienen prácticas sexuales (N

  13. Bay Springs Mill: Historical Archaeology of a Rural Mississippi Cotton Milling Community.

    Science.gov (United States)

    1981-06-30

    down Mackeys Creek to the mills at Aberdeen, much of the virgin timber was removed to provide tillable land for cultivation. Beginning in the last decade...Store appear to be substantial competitors for Bay Springs. The other post offices were operated from the house of the postmaster or postmistress. When...slat back chairs and quilts; met at church, family get-togethers and yearly Confederate Reunions; celebrated holidays and weddings, and held all

  14. Thermal stabilization of uranium mill tailings

    International Nuclear Information System (INIS)

    Dreesen, D.R.; Williams, J.M.; Cokal, E.J.

    1981-01-01

    The sintering of tailings at high temperatures (1200 0 C) has shown promise as a conditioning approach that greatly reduces the 222 Rn emanation of uranium mill tailings. The structure of thermally stabilized tailings has been appreciably altered producing a material that will have minimal management requirements and will be applicable to on-site processing and disposal. The mineralogy of untreated tailings is presented to define the structure of the original materials. Quartz predominates in most tailings samples; however, appreciable quantities of gypsum, clay, illite, or albites are found in some tailings. Samples from the Durango and Shiprock sites have plagioclase-type aluminosilicates and non-aluminum silicates as major components. The iron-rich vanadium tailings from the Salt Lake City site contain appreciable quantities of α-hematite and chloroapatite. The reduction in radon emanation power and changes in mineralogy as a function of sintering temperature are presented

  15. Radon emanation characteristics of uranium mill tailings

    International Nuclear Information System (INIS)

    Nielson, K.K.; Freeman, H.D.; Hartley, J.N.; Mauch, M.L.; Rogers, V.C.

    1982-01-01

    Radon emanation from uranium mill tailings was examined with respect to the mechanisms of emanation and the physical properties of the tailings which affect emanation. Radon emanation coefficients were measured at ambient moisture on 135 samples from the 1981 field test site at the Grand Junction tailings pile. These coefficients showed a similar trend with moisture to those observed previously with uranium ores, and averaged 0.10 + or - 0.02 at dryness and 0.38 + or - 0.04 for all samples having greater than five weight-percent moisture. Small differences were noted between the maximum values of the coefficients for the sand and slime fractions of the tailings. Separate measurements on tailings from the Vitro tailings pile exhibited much lower emanation coefficients for moist samples, and similar coefficients for dry samples. Alternative emanation measurement techniques were examined and procedures are recommended for use in future work

  16. Structural debris experiments at operation MILL RACE

    International Nuclear Information System (INIS)

    Rempel, J.R.; Beck, J.E.; McKee, R.G.

    1983-01-01

    Structural debris patterns as determined by the mechanisms of building collapse under airblast loading have been studied experimentally at MILL RACE, White Sands, NM. Three near full-size buildings were instrumented to observe deflections, accelerations and air pressures and exposed to two different regimes of incident blast pressure produced by HE simulating 1 kt, viz., 10 and 3 psi; after the shot enough wall debris was located and identified to provide estimates of debris movement. Two of the test buildings were unreinforced, load-bearing masonry, one located at each of the two incident overpressures. The third building was made of reinforced concrete panels and was exposed to approximately 25 psi. Preliminary estimates of the effect of arching on debris energy and distribution are presented

  17. Automating horizontal boring and milling machine

    International Nuclear Information System (INIS)

    Naqvi, S.A.R.; Mahmood, T.; Choudhry, M.A.; Hanif, A.

    2012-01-01

    Aiming at the requirements of modification for many old import machine tools in industry, the schemes suited to the renovation are presented in this paper. A horizontal boring and milling machine (HBM) involved in machining of tank Al-Khalid has been modified using Mitsubishi FX-1N and FX-2N PLC. The developed software is for control of all the functions of the said machine. These functions include power on/off oil pump, spindle rotation and machine movement in all axes. All the decisions required by the machine for actuation of instructions are based on the data acquired from the control panel, timers and limit switches. Also the developed software minimize the down time, safety of operator and error free actuation of instructions. (author)

  18. Tree growth studies on uranium mill tailings

    International Nuclear Information System (INIS)

    Murray, D.R.; Turcotte, M.

    1982-01-01

    Coniferous trees planted in 1974 and deciduous species that have volunteered since 1970 on uranium mill tailings that had been stabilized to varying degrees using limestone and vegetation were evaluated. Their survival and growth rates were compared with those from other investigations. Competition for light appears to be a major contributor to mortality. Differences in soil moisture conditions under a tree stand as compared to those under a grass sward are potentially significant enough to affect the tailings hydrology and effluent contamination. Recommendations include planting seeds of deciduous species or deciduous and coniferous seedlings on strips of freshly disturbed tailings. The disturbed strips would provide reduced competition for the initial year and assist in tree survival. The planting of block stands of coniferous or deciduous trees would be useful for evaluating the hydrological impact of the trees as compared to the present grass sward

  19. Electrocoagulation of Palm Oil Mill Effluent

    Science.gov (United States)

    Agustin, Melissa B.; Sengpracha, Waya P.; Phutdhawong, Weerachai

    2008-01-01

    Electrocoagulation (EC) is an electrochemical technique which has been employed in the treatment of various kinds of wastewater. In this work the potential use of EC for the treatment of palm oil mill effluent (POME) was investigated. In a laboratory scale, POME from a factory site in Chumporn Province (Thailand) was subjected to EC using aluminum as electrodes and sodium chloride as supporting electrolyte. Results show that EC can reduce the turbidity, acidity, COD, and BOD of the POME as well as some of its heavy metal contents. Phenolic compounds are also removed from the effluent. Recovery techniques were employed in the coagulated fraction and the recovered compounds was analysed for antioxidant activity by DPPH method. The isolate was found to have a moderate antioxidant activity. From this investigation, it can be concluded that EC is an efficient method for the treatment of POME. PMID:19139537

  20. Caustic saving potentile in textile processing mills

    International Nuclear Information System (INIS)

    Latif, M.; Rehman, A.; Ghafar, A.; Hafeez, N.M.

    2010-01-01

    The textile processing industry of pakistan has great potential of improvement in resource consumption in various production processes. One major concern is the heavy usage of caustic soda (sodium hydroxide) especially during the mercerization process which incurs a significant cost to a textile processing mill. To reduce the unit fabric production cost and stay competitive, the industry need to minimize the caustic wastage and explore the caustic saving potential. This paper describe the detailed caustic consumption practices and saving potentials in woven textile sector based on the data base of 100 industries. Region wise caustic saving potential is also investigated . Three caustic conservation option including process improvement, reuse and recycling, and caustic recovery plants are discussed. Detailed technical and and financial requirements. saving potentials and paybacks of these options are provided. (author)

  1. Grinding arrangement for ball nose milling cutters

    Science.gov (United States)

    Burch, C. F. (Inventor)

    1974-01-01

    A grinding arrangement for spiral fluted ball nose end mills and like tools includes a tool holder for positioning the tool relative to a grinding wheel. The tool is mounted in a spindle within the tool holder for rotation about its centerline and the tool holder is pivotably mounted for angular movement about an axis which intersects that centerline. A follower arm of a cam follower secured to the spindle cooperates with a specially shaped cam to provide rotation of the tool during the angular movement of the tool holder during the grinding cycle, by an amount determined by the cam profile. In this way the surface of the cutting edge in contact with the grinding wheel is maintained at the same height on the grinding wheel throughout the angular movement of the tool holder during the grinding cycle.

  2. Understanding Biomass Ignition in Power Plant Mills

    DEFF Research Database (Denmark)

    Schwarzer, Lars; Jensen, Peter Arendt; Glarborg, Peter

    2017-01-01

    . This is not very well explained by apply-ing conventional thermal ignition theory. An experimental study at lab scale, using pinewood as an example fuel, was conducted to examine self-heating and self-ignition. Supplemental experiments were performed with bituminous coal. Instead of characterizing ignition......Converting existing coal fired power plants to biomass is a readily implemented strategy to increase the share of renewable energy. However, changing from one fuel to another is not straightforward: Experience shows that wood pellets ignite more readily than coal in power plant mills or storages...... temperature in terms of sample volume, mass-scaling seems more physically correct for the self-ignition of solids. Findings also suggest that the transition between self-heating and self-ignition is controlled both by the availability of reactive material and temperature. Comparison of experiments at 20...

  3. Optimization of Milling Parameters Employing Desirability Functions

    Science.gov (United States)

    Ribeiro, J. L. S.; Rubio, J. C. Campos; Abrão, A. M.

    2011-01-01

    The principal aim of this paper is to investigate the influence of tool material (one cermet and two coated carbide grades), cutting speed and feed rate on the machinability of hardened AISI H13 hot work steel, in order to identify the cutting conditions which lead to optimal performance. A multiple response optimization procedure based on tool life, surface roughness, milling forces and the machining time (required to produce a sample cavity) was employed. The results indicated that the TiCN-TiN coated carbide and cermet presented similar results concerning the global optimum values for cutting speed and feed rate per tooth, outperforming the TiN-TiCN-Al2O3 coated carbide tool.

  4. Treatment and valorization of olive mill wastewaters

    Directory of Open Access Journals (Sweden)

    Nabila Slimani Alaoui

    2016-04-01

    Full Text Available This study aims to evaluate the effectiveness of the physicochemical process with lime and ferric chloride in removing the pollution generated by the olive mill wastewaters (OMW .The characterization of the samples has shown that they are acidic, with a black color and a strong organic load due to the presence of phenolic compounds. The combination of the lime and the ferric chloride allows the removal of 87% of the total suspended solid (TSs, 58% of chemical oxygen demand (COD and 75% of Phenolic compounds. After purification the treated OMW were valorised as wash water or used for irrigation of green spaces and the generated sludge were dried and used to combustion. 

  5. Development of uranium milling and conversion

    International Nuclear Information System (INIS)

    Takada, Shingo; Hirono, Shuichiro.

    1983-11-01

    The development and improvement of uranium milling and refining producing uranium tetrafluoride from ores by the wet process, without producing yellowcake as an intermediate product, have been carried out for over ten years with a small pilot plant (50 t-ore/day). In the past several years, a process for converting uranium tetrafluoride into hexafluoride has been developed successfully. To develop the process further, the construction of an integrated milling and conversion pilot plant (200 t-U/year) started in 1979 and was completed in 1981. This new plant has two systems of solvent extraction using tri-noctylamine: one of the systems treats the pregnant solution (uranyl sulphate) by heap-leaching followed by ion exchange, and the other treats the uranyl sulphate solution by dissolving imported yellowcake. The uranium loading solvents from the two systems are stripped with hydrochloric acid solution to obtain the concentrated uranium solution containing 100 g-U/1. Uranyl sulphate solution from the stripping circuit is reduced to a uranous sulphate solution by the electrolytic method. In a reduction cell, uranyl sulphate solution and dilute sulphuric acid are used respectively as catholyte and anolyte, and a cation exchange membrane is used to prevent re-oxidation of the uranous sulphate. In the following hydrofluorination step, uranium tetrafluoride, UF 4 .1-1.2H 2 O (particle size: 50-100μ), is produced continuously as the precipitate in an improved reaction vessel, and this makes it possible to simplify the procedures of liquid-solid separation, drying and granulation. The uranium tetrafluoride is dehydrated by heating to 350 0 C in an inert gas flow. The complete conversion from UF 4 into UF 6 is achieved by a fluidized-bed reactor and a high value of utilization efficiency of fluorine, over 99.9 percent, is attained at about 400 0 C. (author)

  6. Milling damage on Carbon Fibre Reinforced Polymer using TiAlN coated End mills

    International Nuclear Information System (INIS)

    Konneh, Mohamed; Kassim, Abdullah Abdul Rahman; Izman, Sudin

    2015-01-01

    This paper reports on the damage caused by milling Carbon Fibre Reinforced Composite (CFRP) with 2-flute 4 mm-diameter solid carbide end mills, coated with titanium aluminium nitride. The machining parameters considered in work are, rotation speed, feed rate and depth of cut. Experiments were designed based on Box-Behnken design and the experiments conducted on a Mikrotool DT-110 CNC micro machine. A laser tachometer was used to ascertain a rotational speed for conducting any machining trial. Optical microscopy examination reveals minimum delamination value of 4.05 mm at the spindle speed of 25,000 rpm, depth of cut of 50μm and feed rate of 3 mm/min and the maximum delamination value of 5.04 mm at the spindle speed of 35000 rpm, depth of cut of 150μm and feed rate of 9 mm/min A mathematical model relating the milling parameters and delamination has been established. (paper)

  7. Improved oral bioavailability of probucol by dry media-milling.

    Science.gov (United States)

    Li, Jia; Yang, Yan; Zhao, Meihui; Xu, Hui; Ma, Junyuan; Wang, Shaoning

    2017-09-01

    The polymer/probucol co-milled mixtures were prepared to improve drug dissolution rate and oral bioavailability. Probucol, a BCS II drug, was co-milled together with Copovidone (Kollidon VA64, VA64), Soluplus, or MCC using the dry media-milling process with planetary ball-milling equipment. The properties of the milled mixtures including morphology, crystal form, vitro drug dissolution and in vivo oral bioavailability in rats were evaluated. Probucol existed as an amorphous in the matrix of the co-milled mixtures containing VA64, which helped to enhance drug dissolution. The ternary mixture composed of VA64, RH40, and probucol showed increased dissolution rates in both sink and non-sink conditions. It also had a higher oral bioavailability compared to the reference formulation. Dry-media milling of binary or ternary mixtures composed of drug, polymer and surfactant possibly have wide applications to improve dissolution rate and oral bioavailability of water-insoluble drugs. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Contamination risk of stable isotope samples during milling.

    Science.gov (United States)

    Isaac-Renton, M; Schneider, L; Treydte, K

    2016-07-15

    Isotope analysis of wood is an important tool in dendrochronology and ecophysiology. Prior to mass spectrometry analysis, wood must be homogenized, and a convenient method involves a ball mill capable of milling samples directly in sample tubes. However, sample-tube plastic can contaminate wood during milling, which could lead to biological misinterpretations. We tested possible contamination of whole wood and cellulose samples during ball-mill homogenization for carbon and oxygen isotope measurements. We used a multi-factorial design with two/three steel milling balls, two sample amounts (10 mg, 40 mg), and two milling times (5 min, 10 min). We further analyzed abrasion by milling empty tubes, and measured the isotope ratios of pure contaminants. A strong risk exists for carbon isotope bias through plastic contamination: the δ(13) C value of polypropylene deviated from the control by -6.77‰. Small fibers from PTFE filter bags used during cellulose extraction also present a risk as the δ(13) C value of this plastic deviated by -5.02‰. Low sample amounts (10 mg) showed highest contamination due to increased abrasion during milling (-1.34‰), which is further concentrated by cellulose extraction (-3.38‰). Oxygen isotope measurements were unaffected. A ball mill can be used to homogenize samples within test tubes prior to oxygen isotope analysis, but not prior to carbon or radiocarbon isotope analysis. There is still a need for a fast, simple and contamination-free sample preparation procedure. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  9. Actividad enzimática del suelo -Deshidrogenasa , -ß Glucosidasa , Fosfatasa y Ureasa - bajo diferentes cultivos.

    Directory of Open Access Journals (Sweden)

    Carlos Henríquez

    2014-01-01

    Full Text Available Se analizó la actividad de 4 enzimas del suelo en fincas bajo diferentes manejos agronómi - cos y en diferentes tipos de suelos. Las enzimas evaluadas fueron la Fosfatasa, β-Glucosidasa, Deshidrogenasa y Ureasa. Se tomaron muestras de suelo de los primeros 20 cm de profundidad con el fin de analizarlas químicamente y determinar la actividad de las 4 enzimas a evaluar. Se encontró que la actividad de la Deshidrogenasa varió de 0,13 a 4,46 con un promedio de 1,17 (μg INTF.g - 1 .h -1 ; la β-Glucosidasa varió de 31,9 a 208,1 con un promedio de 108,1 (μg PNP.g -1 .h -1 . Por otro lado la Fosfatasa tuvo valores entre 413,4 y 3043,6 con un promedio de 1521,5 μg PNP.g -1 .h -1 , mientras que la Ureasa varió de 12,5 a 52,8 con un promedio de 38,3 μg N-NH4.g -1 .h -1 . La Fos - fatasa correlacionó con el porcentaje de materia orgánica y de carbono en el suelo (0,75 y 0,76 respectivamente, p<0,01; se encontró una rela - ción inversa entre la actividad de esta enzima y el contenido de P disponible (r de -0,53, p<0,10. La Ureasa correlacionó con la Fosfatasa (r de 0,61 p<0,05 y con la Deshidrogenasa (r de -0,77 p<0,01. El análisis multivariado de conglomera - dos a partir de la actividad enzimática permitió hacer grupos similares según el tipo de cultivo, lo que evidencia el potencial de utilización que tiene esta propiedad para realizar estudios más detallados.

  10. Viabilidad de Saccharomyces boullardii en queso fresco bajo condiciones de acidez “in vitro”

    Directory of Open Access Journals (Sweden)

    Rafael Zamora-Vega

    2015-01-01

    Full Text Available Un alimento funcional contiene en su formulación una o más sustancias que generan bienestar a la salud humana como son probióticos, prebióticos y ácidos grasos, entre otros. En los alimentos funcionales los microorganismos probióticos deben permanecer viables y activos en el alimento y durante el pasaje gastrointestinal, para garantizar su potencial efecto benéfico en el huésped. En el presente estudio se evaluó la viabilidad de la levadura probiótica Saccharomyces boulardii tanto de forma libre como encapsulada bajo condiciones de acidez, adaptada a un queso fresco. Método: La levadura fue expuesta en el alimento tanto en forma libre como encapsulada. Los materiales usados para encapsular fueron una mezcla de alginato de sodio, inulina y mucílago de nopal (Opuntia ficus-indica. Para la liberación del microorganismo, el estudio se realizó a pH de 2.0 y 6.5, simulándose las condiciones de acidez de estómago y colon respectivamente, a diferentes tiempos de exposición de 0, 60, 120 y 180 min. Resultados: A pH de 2.0 se observó mayor pérdida en la viabilidad del probiótico en forma libre, la cual fue de 23.72, 27.03 y 33.02 % respectivamente, con respecto a la viabilidad inicial; cuando el microorganismo se adicionó al queso en forma encapsulada, su pérdida de viabilidad a los mismos tiempos de exposición fue de 5.74, 14.24 y 18.81%, manteniendo mayor supervivencia. Por otra parte, a pH de 6.5 el probiótico libre en el alimento mostró una pérdida de viabilidad de 2.23, 3.50 y 5.94%, en cambio de forma encapsulada la pérdida de viabilidad fue de 0.95, 2.20 y 3.03%, respectivamente, observándose mayor supervivencia que en estado libre. Conclusión: El queso fresco mantuvo viable el nivel de supervivencia de Saccharomyces boulardii, particularmente cuando fue adicionado en forma encapsulada comparado a cuando fue incorporado en estado libre.

  11. La Frontera como Recurso Turístico. Posibilidades del Bajo/Baixo Guadiana

    Directory of Open Access Journals (Sweden)

    José Manuel Jurado-Almonte

    2018-02-01

    Full Text Available En el espacio de integración de la Unión Europea persisten las fronteras, ya sin las dificultades y barreras de antaño, pero manteniendo numerosos símbolos y elementos del patrimonio cultural que siguen marcando una diferencia. Son líneas divisorias y, a la vez, franjas de territorios de transición con un importante patrimonio natural y cultural que se convierten ahora en recursos de atracción para novedosas demandas turísticas. Por ello, se estudia ya el turismo de frontera como un nuevo producto donde el recurso de la frontera y la historia es el principal atractivo y destino, aunque de forma complementaria a otros recursos y productos turísticos. Al margen de otros territorios y destinos fronterizos de Europa o del mundo, nuestra preocupación investigadora se centra en la Raya luso-española, en su extremo sur, en el Bajo Guadiana, en espacios que participan del Algarve, Baixo Alentejo y Huelva. En este territorio se conjugan destinos turísticos consolidados (Algarve y Costa Occidental de Huelva con un interior muy próximo e ignoto para la mayor parte de los turistas alojados en ese borde costero, a apenas unas decenas de kilómetros. Sin embargo, en los últimos años, un incipiente espacio turístico parece abrirse tierras adentro (y aguas desde la costa. El estuario del Guadiana actúa de puerta de entradahacia un interior rico en recursos y patrimonios histórico-artísticos y naturales y que podría favorecerse de un turismo de frontera. Nuestra hipótesis principal es que el desarrollo del turismo de frontera podría ser una oportunidad para este territorio transfronterizo. En este trabajo tratamos, por tanto, de: -\tAnalizar el marco geográfico y el patrimonio natural y cultural de este ámbito transfronterizo, con una breve semblanza a su población y políticas de cooperación en materia de infraestructuras de accesibilidad y de turismo. -\tdiagnosticar este novedoso producto turístico y para este territorio en

  12. Mecanismo de acción de las fosfatasas ácidas de bajo peso molecular

    Directory of Open Access Journals (Sweden)

    Emilio Guija

    2007-12-01

    Full Text Available Las fosfatasas ácidas son enzimas ampliamente distribuidas en la naturaleza y tienen la propiedad de hidrolizar fosfomonoésteres a pH 5,0, liberando como productos de la reacción un alcohol y fosfato inorgánico. Cuando se compara los valores de kcat/Km de las fosfatasas de hígado, de bovino, alpaca y porcino, nos permite sugerir que estas enzimas tienen elevada afinidad por el sustrato p-nitrofenil fosfato. Los productos que se liberan durante la catálisis por fosfatasa ácida, muestran que el fenol o el p-nitrofenol se comportan como inhibidores de tipo no competitivo, mientras que el fosfato inorgánico muestra una inhibición de tipo competitiva. Para evidenciar la probable formación de un complejo covalente en la secuencia catalítica, se utilizó diversos nucleófilos más eficientes que el agua, tales como metanol, etanol y glicerol. Las modificaciones que produjeron en los valores Km, Vmax y los productos liberados en la reacción sugieren la formación de un complejo enzima-fosfato. El pH afecta los valores de Km y Vmax de las fosfatasas ácidas, un análisis del comportamiento de estas enzimas en un rango de pH comprendido entre 3,8 y 6,8 sugieren que en el sitio activo existe un residuo de aminoácido con un valor pKa de 6,0. El uso del dietilpirocarbonato, un compuesto que selectivamente reacciona con el residuo histidina en las proteínas, inhibe completamente a estas fosfatasas. Así mismo, un experimento de cinética de inhibición múltiple realizado en presencia de fosfato inorgánico y dietilpirocarbonato permite calcular un valor Ki que es igual al obtenido en otras condiciones experimentales. En tal sentido, las fosfatasas ácidas de bajo peso molecular catalizarían las reacciones a través de un modelo de tipo uni biordenado, con la formación de un complejo covalente intermedio, y que el residuo histidina participaría directamente en la catálisis.

  13. La importancia de los materiales en las viviendas de muy bajo coste

    Directory of Open Access Journals (Sweden)

    Salas, Julián

    1992-09-01

    Full Text Available This text fits into the context of the attempt to emphasize the considerable importance of the factor of the construction materials in the subsection of low cost housing in Developing Countries in general and in Latín America in particular. The author tries to quantify, in a global manner, the repercussion of the materials through different assumptions and to show how it increases as the sections of installations and finishes diminish —in fact, practically disappear—. In accordance with this and as a consequence, the author discusses the necessity to use autochthonous materials and to support the research and technological development which lay stress on the use of alternative materials and the re-use of agro-industrial waste. As a pan of the Chapter V reproduced here, a special Section entitled "The Industry of Construction Materials" is contemplated, a section which we omitted and which can be found in n.º 198 of this Quarterly where it was originally published.

    El texto que sigue se encuadra en el contexto de intentar enmarcar la importancia considerable del capítulo de los materiales de construcción en el subsector de las viviendas de muy bajo coste en los Países en Vías de Desarrollo en general, y en Latinoamérica en particular. El autor trata de cuantificar, en forma global, la repercusión de los materiales en varios supuestos y como ésta aumenta al disminuir —prácticamente desaparecer— las partidas de instalaciones y acabados. De conformidad y como consecuencia de lo anterior, el autor se ocupa de la necesidad de emplear materiales autóctonos y de apoyar la investigación y el desarrollo tecnológico que ponen énfasis en la utilización de materiales alternativos y la reutilización de desechos agro-industriales. Formando parte del Capítulo V que se reproduce, se contempla un apartado específico con el título "La Industria de Materiales de la Construcción" que hemos omitido, remitiendo al lector

  14. Bifurcation and stability analysis of a nonlinear milling process

    Science.gov (United States)

    Weremczuk, Andrzej; Rusinek, Rafal; Warminski, Jerzy

    2018-01-01

    Numerical investigations of milling operations dynamics are presented in this paper. A two degree of freedom nonlinear model is used to study workpiece-tool vibrations. The analyzed model takes into account both flexibility of the tool and the workpiece. The dynamics of the milling process is described by the discontinuous ordinary differential equation with time delay, which can cause process instability. First, stability lobes diagrams are created on the basis of the parameters determined in impact test of an end mill and workpiece. Next, the bifurcations diagrams are performed for different values of rotational speeds.

  15. RANCANG BANGUN CNC MILLING MACHINEHOME MADE UNTUK MEMBUAT PCB

    Directory of Open Access Journals (Sweden)

    Dityo Pradana

    2011-06-01

    Full Text Available Kendala yang dimiliki oleh seorang penggemar elektronik untuk membuat PCB diantaranya adalah efisiensi waktu, tenaga, dan biaya. Pembuatan CNC milling machine merupakan salah satu solusi yang tepat untuk membuat PCB. CNC milling machine adalah mesin bubut otomatis yang bekerja atas dasar perintah Numerical Code. Rancang bangun CNC Milling Machine Home Made ini dikontrol oleh komputer yang akan mengontrol IC L297 melalui parallel port. IC L297 ini kemudian memberikan empat data digital a, b, c dan d untuk mengatur phase IC L298 yang menyalurkan tegangan untuk koil motor stepper unipolar. Pada akhirnya motor stepper unipolar akan memutar baut dan dapat menggerakkan meja sumbu menggunakan prinsip kerja ulir.

  16. Ball milling of chalcopyrite: Moessbauer spectroscopy and XRD studies

    International Nuclear Information System (INIS)

    Pollak, H.; Fernandes, M.; Levendis, D.; Schonig, L.

    1999-01-01

    The aim of this project is to study the behavior of chalcopyrite under ball milling for extended periods in order to determine how it's decompose or transform. Tests were done with chalcopyrite mixed with iron and zinc with and without surfactant. The use of surfactants has various effects such as avoiding oxidation and clustering of the fine particles. In all case magnetic chalcopyrite is transformed into a paramagnetic component showing a disordered structure, thus revealing that Cu atoms have replaced Fe atoms. In the case of ball milling in air, chalcopyrite is decomposed with the lost of iron, while in milling under surfactants, iron enters into the chalcopyrite structure. (author)

  17. Massive Yang-Mills fields in the Kemmer's formulation

    International Nuclear Information System (INIS)

    Santana Cordolino, L.A. de.

    1984-01-01

    The Kemmer's equation, which describes the meson, is presented in the field theory formalism. Conservated, quantities are found through the Noether's identity. This formalism is used for masive Yang-Mills fields and two equations, similar to the Kemmer's equation, are obtained, although of different formates, both containing quadratic terms. In consequence two Lagrangians are defined, formally distint, for the Yang-Mills fields. The Schroedinger-like Hamiltonian is calculated for the first wave equations. This Hamiltonian presentes one spin-Yang-Mills field interaction term, PHI jk . (L.C.) [pt

  18. Yang-Mills analogs of general-relativistic solutions

    International Nuclear Information System (INIS)

    Singlton, D.

    1998-01-01

    Some solutions of Yang-Mills equations, which can be found with the use of the general relativistic theory and Yang-Mills theory, are discussed. Some notes concerning possible physical sense of these solutions are made. Arguments showing that some of such solutions in the Yang-Mills theory (similar to the general relativistic ones) may be connected with the confinement phenomenon are given in particular. The motion of probe particles located into the phonon potential similar to the Schwarz-Child one is briefly discussed for this purpose [ru

  19. Environmental impact of uranium mining and milling in Australia

    International Nuclear Information System (INIS)

    Levins, D.M.

    1980-01-01

    Australia has almost twenty per cent of the Western World's low-cost uranium reserves, located mostly in the Alligator Rivers region of the Northern Territory. At present, only one uranium mill is operating in Australia, but a number of new mills are planned for the early 1980s. Details are given of Australian uranium mining and milling proposals and the measures taken to minimize their environmental impact. Major factors affecting environmental impact are discussed, including treatment of liquid wastes, water management, control of radon and other airborne releases, and disposal of tailings. (auth)

  20. Conformally flat spaces and solutions to Yang-Mills equations

    International Nuclear Information System (INIS)

    Chaohao, G.

    1980-01-01

    Using the conformal invariance of Yang-Mills equations in four-dimensional manifolds, it is proved that in a simply connected space of negative constant curvature Yang-Mills equations admit solutions with any real number as their Pontryagin number. It is also shown that the space S 3 x S 1 which is the regular counterpart of the meron solution is one example of a class of solutions to Yang-Mills equations on compact manifolds that are neither self-dual nor anti-self-dual

  1. Tungsten-nanodiamond composite powders produced by ball milling

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, D., E-mail: daniela.nunes@ist.utl.pt [Associacao Euratom/IST, Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade Tecnica de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); LNEG, Estrada do Paco do Lumiar, 1649-038 Lisboa (Portugal); ICEMS, Instituto Superior Tecnico, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); Livramento, V. [Associacao Euratom/IST, Instituto de Plasmas e Fusao Nuclear, Instituto Superior Tecnico, Universidade Tecnica de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); LNEG, Estrada do Paco do Lumiar, 1649-038 Lisboa (Portugal); Mardolcar, U.V. [Departamento de Fisica, Instituto Superior Tecnico, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); Centro de Ciencias Moleculares e Materiais, Faculdade de Ciencias da Universidade de Lisboa, Campo Grande, 1749-016 Lisboa (Portugal); Correia, J.B. [LNEG, Estrada do Paco do Lumiar, 1649-038 Lisboa (Portugal); Carvalho, P.A. [ICEMS, Instituto Superior Tecnico, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); Departamento de Bioengenharia, Instituto Superior Tecnico, Av. Rovisco Pais, 1049-001 Lisboa (Portugal)

    2012-07-15

    The major challenge in producing tungsten-nanodiamond composites by ball milling lies in successfully dispersing carbon nanoparticles in the metallic matrix while keeping carbide formation at a minimum. Processing windows for carbide minimization have been established through systematic variation of the nanodiamond fraction, milling energy and milling time. Materials characterization has been carried out by X-ray diffraction, scanning and transmission electron microscopy and microhardness testing. Nanostructured matrices with homogeneously dispersed particles that preserved the diamond structure have been produced. Differential thermal analysis has been used to evaluate the composites thermal stability.

  2. Factores de riesgo de bajo peso al nacer Risk factors for low birthweight

    Directory of Open Access Journals (Sweden)

    Marcelo Bortman

    1998-05-01

    Full Text Available El bajo peso al nacer (BPN es el principal factor determinante conocido de la mortalidad infantil. Pese a la notable reducción de las tasas de mortalidad infantil y al aumento de las tasas de supervivencia de niños con BPN, en Neuquén, Argentina, no se han observado descensos notables de las tasas de BPN. El propósito de este estudio fue conocer los factores de riesgo de BPN, su frecuencia en la población y el papel de la atención prenatal en su prevención, y desarrollar una escala de riesgo que permita identificar a las mujeres en mayor riesgo de dar a luz un niño de bajo peso. Con tal propósito se realizó un estudio transversal en el cual se utilizó 50% de los datos del Sistema Informático Perinatal correspondientes al período 1988­1995 y procedentes de los 29 hospitales de la provincia de Neuquén (46 171 nacimientos. Se analizaron la distribución del peso y la frecuencia de los posibles factores de riesgo de BPN. La asociación entre estos factores y el BPN se analizó mediante un modelo de regresión logística. Con los resultados obtenidos se desarrolló una escala aditiva, que fue validada con el 50% restante de los registros de nacimientos. La razón de posibilidades (RP más elevada correspondió a la falta de atención prenatal (RP = 8,78; IC95%: 6,7 a 11,4. Las RP asociadas con una atención prenatal inadecuada, una primera consulta prenatal tardía, preeclampsia o eclampsia, hemorragia o anomalías de la placenta o sus membranas e historia de un hijo previo con BPN fueron mayores de 2,0. El riesgo de tener hijos con BPN también fue más alto en las mujeres mayores de 40 años, las menores de 20, las solteras, las fumadoras, aquellas cuyo intervalo intergenésico fue menor de 18 meses y las que tenían un índice de masa corporal menor de 20. Por último, se encontró una relación lineal directa entre el puntaje en la escala y el riesgo de tener un hijo con BPN.Low birthweight (LBW is the main known determinant of

  3. Requerimiento hídrico de la berenjena Solanum melongena L. bajo

    Directory of Open Access Journals (Sweden)

    Sánchez V. Carlos

    2004-12-01

    Full Text Available

    El objetivo del presente trabajo fue determinar los requerimientos hídricos de dos genotipos de berenjena Solanum melongena L. bajo riego por goteo en el valle del Sinú medio, en época seca. El estudio se hizo en el Centro de Investigación Turipaná, de Corpoica, ubicado en Cereté, Córdoba, en un suelo clasificado como eutropet. Se utilizó un diseño de bloques al azar con un arreglo factorial de parcelas divididas, con dos genotipos de berenjena (Morada y Lila gris bajo cinco dosis de riego 1, 2, 4, 6 y 8 l∙planta -1∙día-1. Los resultados  demostraron que los genotipos de berenjena morada y lila gris se comportaron similarmente, sin presentar diferencias significativas. Hubo diferencias altamente significativas en las variables altura de planta, diámetro del tallo y rendimiento. El tratamiento de riego de 8 l∙planta

  4. 46 CFR 50.25-5 - Products requiring manufacturer or mill certification.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Products requiring manufacturer or mill certification... manufacturer or mill certification. (a) Products required to be certified by a manufacturer or by mill... accepted without referring to its manufacturer or mill certification, if: (1) The product is marked in...

  5. Jet milling from a particle perspective : predicting particle fracture based on mechanical material properties

    NARCIS (Netherlands)

    Vegt, Onno Martinus

    2007-01-01

    Milling is a very old discipline originated in milling agricultural products to flour. Despite the enormous literature on size reduction, milling is a unit operation which has no sound underlying theory comparable to those existing for other unit operations. The design of milling equipment for a

  6. 29 CFR 1910.216 - Mills and calenders in the rubber and plastics industries.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Mills and calenders in the rubber and plastics industries... Guarding § 1910.216 Mills and calenders in the rubber and plastics industries. (a) General requirements— (1... installed in accordance with this section and Subpart S of this part. (4) Mill roll heights. All new mill...

  7. 77 FR 35431 - Final Alternative Soils Standards for the Uravan, CO, Uranium Mill

    Science.gov (United States)

    2012-06-13

    ..., Uranium Mill AGENCY: Nuclear Regulatory Commission. ACTION: Notice of Uranium milling alternative... amend their agreements to regulate uranium mill tailings (11e.(2) byproduct material). Six Agreement... transferring the Uravan uranium mill site to the U.S. Department of Energy. The NRC staff found no deficiencies...

  8. 75 FR 30844 - General Mills, Inc.; Withdrawal of Food Additive Petition

    Science.gov (United States)

    2010-06-02

    ...] (formerly Docket No. 2007F-0454) General Mills, Inc.; Withdrawal of Food Additive Petition AGENCY: Food and... 7M4770) had been filed by General Mills, Inc., One General Mills Blvd., Minneapolis, MN 55426. The... use in food production. General Mills, Inc., has now withdrawn the petition without prejudice to a...

  9. 40 CFR 63.1347 - Standards for raw and finish mills.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Standards for raw and finish mills. 63... and Operating Limits § 63.1347 Standards for raw and finish mills. The owner or operator of each new or existing raw mill or finish mill at a facility which is a major source subject to the provisions...

  10. 76 FR 70170 - Proposed Alternative Soils Standards for the Uravan, Colorado Uranium Mill

    Science.gov (United States)

    2011-11-10

    ..., Colorado Uranium Mill AGENCY: Nuclear Regulatory Commission. ACTION: Uranium milling alternative standards... Agreements to regulate uranium mill tailings (11e.(2) byproduct material). Six Agreement States have this... in Colorado are acceptable. Discussion The Uravan site began operations in 1912 as a radium mill and...

  11. Enfermedad periodontal: ¿es factor de riesgo para parto pretérmino, bajo peso al nacer o preeclampsia?

    Directory of Open Access Journals (Sweden)

    José Luis Castaldi

    2006-04-01

    Full Text Available OBJETIVOS: Evaluar si la enfermedad periodontal (EP constituye un factor de riesgo de parto pretérmino, bajo peso al nacer o preeclampsia y si hay alguna relación entre las formas clínicas de la EP y los resultados obstétricos mencionados. MÉTODOS: Estudio analítico, transversal y prospectivo de todas las mujeres que tuvieron su parto en el Hospital Dr. José Penna, de la ciudad de Bahía Blanca, Argentina, entre el 1.º de febrero y el 18 de julio de 2003 y entre el 1.º de marzo y el 31 de mayo de 2004. A las mujeres que cumplieron los criterios de inclusión (ser mayor de 18 años, tener al menos 18 dientes, no ser diabética y que los hijos hubieran sobrevivido al parto se les practicó un examen odontológico en busca de hemorragia al sondaje, movilidad dentaria o inflamación gingival y se realizaron mediciones clínicas de la pérdida de inserción. Se calcularon las razones de posibilidades (odds ratios, RP con sus intervalos de confianza del 95% (IC95% y se ajustaron los resultados por las variables "ser fumadora" y "tener anemia". RESULTADOS: Se registraron 2 003 nacimientos, correspondientes a 1 982 partos. Se excluyeron 420 (21,2% mujeres por no cumplir los criterios de inclusión o por no poder realizárseles el diagnóstico odontológico previsto. De las 1 562 mujeres evaluadas, 809 (51,8% presentaban alguna de las afecciones buscadas; de ellas, 274 (17,5% padecían EP grave y 535 (34,3% tenían gingivitis. En total, 149 (9,5% partos fueron pretérmino, en 161 (10,3% nacieron niños con bajo peso y en 157 (10,0% se presentaron casos de preeclampsia. No se observó asociación alguna entre la EP y el parto pretérmino (RP = 1,06; IC95%: 0,74 a 1,50, el bajo peso al nacer (RP = 1,05; IC95%: 0,74 a 1,47 y la preeclampsia (RP = 0,99; IC95%: 0,70 a 1,40. El riesgo de dar a luz un niño con bajo peso al nacer en el subgrupo de fumadoras de más de 10 cigarrillos diarios fue mayor en las que tenían enfermedad periodontal grave que

  12. Production of nanocrystalline cermet thermal spray powders for wear resistant coatings by high-energy milling

    International Nuclear Information System (INIS)

    Eigen, N.; Klassen, T.; Aust, E.; Bormann, R.; Gaertner, F.

    2003-01-01

    TiC-Ni based nanocrystalline cermet powders for thermal spraying were produced by high-energy milling. Milling experiments were performed in an attrition mill and a vibration mill in kilogram scale, and powder morphologies and microstructures were characterized using scanning electron microscopy, X-ray diffraction, and laser scattering for particle size analysis. Milling time and powder input were optimized with respect to the desired microstructure and particle sizes, and the results using both types of mill were compared. Powders with homogeneously dispersed hard phase particles below 300 nm could be produced in both mills. Additional processes for the refinement of powder morphology and particle size distribution are discussed

  13. Yank-Mills fields and hypersurface twistors

    International Nuclear Information System (INIS)

    Fioravanti, M.A.

    1989-01-01

    The author establishes a one-to-one correspondence between (not necessarily self-dual) solutions of the non-abelian source-free Yang-Mills equations on Minkowski space, and pairs of cohomology classes [γ], [φ]. If O(n) is the sheaf of holomorphic sections of the n th tensor power of the hyperplane line bundle over C P 1 , and g is the Lie algebra of the gauge group, [γ] var-epsilon H CR 1 (PN circumflex,g) and defines a deformation C-R(γ) of the canonical C-R structure on a principal bundle over PN circumflex, the subset of null twistor space PN, representing unscaled null geodesics in Minkowski space. [φ] var-epsilon H CR(γ) 1 (PN,O(-4) direct-product g). The spin-bundle over Minkowski space is used in the construction. This bundle is foliated by a congruence of lines; each of these lines projects into a null geodesic in Minkowski space, and corresponds to a point in N. The restriction S of the spin-bundle to a spacelike hyperplane in Minkowski space is transversal to this foliation, and PN is identified with S. [γ] encodes certain components of the Yang-Mills connection on S, and [φ] encodes the self-dual part of the field on S. They give initial values for a system of evolution equations in the spin-bundle. This system is composed by four first order ordinary differential equations along the lines in the foliation of the spin-bundle, with some of the right-hand sides given by integrals on the fiber over a point in Minkowski space, and a partial differential equation on this fiber. The evolution equations simplify largely in the case of an abelian gauge group. In the case of anti-self-dual fields, the system reduces to two ordinary differential equations along the lines in the foliation of the spin-bundle, and the differential equation on the fiber over each point in Minkowski space. He studies the modifications in the construction when sources are present

  14. PAUTAS PARA LA GESTIÓN INTEGRADA DE LOS RECURSOS HÍDRICOS EN LOS BAJOS SUBMERIDIONALES (ARGENTINA)

    OpenAIRE

    M. PARIS; R. P. MARANO

    2017-01-01

    La cuenca hidrográfi ca es una unidad territorial compleja tanto por sus características naturales, como por las particularidades de la sociedad. Dado que ésta es una “unidad territorial”, entonces los problemas que surjan de la gestión de los recursos hídricos serán de toda la cuenca. En el ámbito de Santa Fe está contemplado un Plan de Manejo Integral de los Bajos Submeridionales. Algunas acciones fueron llevadas a cabo en este marco, pero no hay una Agenda del Agua que sea reconocida po...

  15. Aplicación de tecnologías inalámbricas de bajo consumo para entornos exteriores ferroviarios

    OpenAIRE

    Garrido Calvo, Víctor

    2013-01-01

    El objetivo del proyecto es el análisis del funcionamiento de tecnologías inalámbricas de bajo consumo, tales como ZigBee, aplicadas en el transporte ferroviario de mercancías para la interconexión entre vagones y/o con la locomotora o vagón principal que permitan: - Localizar, posicionar e dentificar el material móvil (trenes / vagones / contenedores) y las mercancías transportadas. - Intercambiar información de manera ágil y flexible entre el material móvil y los Centros de C...

  16. Infecciones del tracto urinario bajo en adultos y embarazadas: consenso para el manejo empírico

    OpenAIRE

    Martinez, E; Osorio, J; Delgado, J; Esparza, G.E; Motoa, G; Blanco, V.M; Hernandez, C.A; Agudelo, A; Aluma, L.J; Betancurt, C.A; Ospina, W; Camargo, J.C; Canaval, H; Castañeda, C; Correa, A

    2013-01-01

    Introducción: La infección no complicada del tracto urinario bajo y la bacteriuria asintomática son causas frecuentes de consulta médica ambulatoria y en el servicio de urgencias en Colombia y el mundo. La falta de pautas y consenso para el manejo, así como la emergencia de resistencia a las múltiples opciones terapéuticas disponibles en los uropatógenos provenientes de la comunidad, hacen necesario elaborar unas recomendaciones que orienten al clínico sobre el abordaje óptimo de estas entida...

  17. Estudio embriológico de Iguana iguana (Linnaeus, 1758) bajo condiciones de incubación controladas

    OpenAIRE

    Ossa Velásquez Jaime de la; Guzmán Lotero Edith Liliana

    2000-01-01

    Se realiza un estudio de Iguana iguana para establecer los estadios embrionarios que caracterizan la especie, bajo condiciones de incubaci6n artificial controladas de 32.5°C y humedad relativa promedio de 90% ± 2, colectándose y fijándose 5 huevos diarios a partir de la postura y durante 67 días. El peso promedio de los huevos fue de 15.4001 g, largo 3.84 mm, ancho 2.7 mm, notándose que estos son independientes del tiempo transcurrido de incubación. El peso de los embriones no presen...

  18. Un análisis de los determinantes del pago bajo Contratos de Préstamo Grupal

    OpenAIRE

    Santiago Pulido, Juan Manuel

    2013-01-01

    En la presente tesis doctoral se estudia la relación entre cohesión social y pago en contratos de préstamo grupal con las herramientas de la economía de redes sociales. En un primer planteamiento, el mecanismo del préstamo grupal se aproxima a uno de contribución voluntaria encontrando que el pago esperado de participar es función directa de la probabilidad de pago individual. Esta última se estudia en primer instancia bajo independencia en los eventos de pago. El mecanismo se tra...

  19. Humedad crítica y repelencia al agua en andisoles colombianos bajo cobertura de pinus patula schltdl y cham.

    OpenAIRE

    Jaramillo Jaramillo, Daniel Francisco

    2011-01-01

    En un lote con Andisoles bajo cobertura de Pinus patula Schltdl y Cham se ubicaron 4 transectos sobre los cuales se hizo un muestreo horizontal cada 5 cm, en 4 profundidades, con el fin de establecer si había una zona de transición de humedad crítica en el suelo que estuviera controlando la presencia de repelencia al agua en él. Se hicieron determinaciones de WDPT en el campo y luego en muestras secadas a 35°C, en laboratorio. En cada condición se determinó el contenido gravimétrico de hum...

  20. Determinantes sociales de la mortalidad infantil en municipios de bajo índice de desarrollo humano en México

    OpenAIRE

    Duarte-Gómez, María Beatriz; Núñez-Urquiza, Rosa María; Restrepo-Restrepo, José Alonso; Richardson-López-Collada, Vesta Louise

    2015-01-01

    Introducción: Se realizó un estudio con el objetivo de identificar determinantes sociales de mortalidad infantil en zonas rurales en México, y recomendar estrategias para disminuir esta mortalidad. Métodos: Se tomó una muestra por conveniencia de 16 municipios de bajo índice de desarrollo humano. Se identificaron fallecimientos de menores de un año de edad a través de registros oficiales y de entrevistas con autoridades civiles, personal de salud y líderes comunitarios. También se realizar...

  1. Fortificaciones de la II Edad del Hierro en el Bajo Aragón : un estilo regional

    OpenAIRE

    Melguizo , Salvador; Moret , Pierre

    2006-01-01

    International audience; Se estudian en esta comunicación las fortificaciones del final de la época ibérica en dos áreas del Bajo Aragón: la desembocadura del Regallo, en Caspe, con los yacimientos de La Tallada y Palermo I, y el valle medio del Matarraña, entre Calaceite y Valdeltormo, con los yacimientos de San Antonio, Els Castellans y Torre Cremada. Se observa en ellos un patrón repetitivo, caracterizado por la presencia de tres elementos, concentrados en la zona de acceso más vulnerable: ...

  2. Desarrollo comunitario en el medio rural: un proyecto en la mancomunidad de Villas del Bajo Carrion y Ucieza

    OpenAIRE

    Giraldo Rojo, Cristina

    2017-01-01

    Este proyecto de fin de grado ha sido elaborado con el fin de hallar teorías de desarrollo comunitario, así como también realizar un análisis de estas mismas. De igual forma que se han analizado las iniciativas por parte de los diferentes agentes y administraciones, para después elaborar y planificar unas actividades de desarrollo comunitario en la Mancomunidad de Villas del bajo Carrión y Ucieza, situado en la provincia de Palencia. Grado en Educación Social

  3. Incidencia de la estrategia colombiana de desarrollo bajo en carbono en el mercado de bonos de carbono en Colombia

    OpenAIRE

    Castellanos Garcia, Camilo Andres

    2015-01-01

    La presente investigación tiene como objetivo principal determinar el papel de la estrategia colombiana de desarrollo bajo en carbono en el mercado de bonos de carbono en Colombia. Esto con el fin de demostrar que las acciones nacionalmente apropiadas de mitigación NAMAS son un mecanismo de mitigación y puede no tener una incidencia en la oferta ni tampoco en la demanda del mercado de bonos de carbono en Colombia. Esta investigación se llevará a cabo por medio de un estudio de caso con un enf...

  4. Diseño de un cuadricóptero de bajo coste basado en herramientas de software libre

    OpenAIRE

    Ciudad Gómez, Rubén

    2016-01-01

    El presente proyecto tiene como objetivo la realización de un cuadricóptero de bajo coste desarrollado con herramientas de software libre, con el fin de permitir el acceso y modificación del mismo a cualquiera que posea los conocimientos necesarios. Los cuadricópteros se definen como un vehículo aéreo no tripulado con cuatro rotores en los extremos. Los ejemplos existentes de estos tipos de vehículos son casi siempre de grandes cuadricópteros, los cuales utilizan diferentes tecnologías en ...

  5. Riesgos y consecuencias de las prácticas sexuales en adolescentes bajo los efectos de alcohol y otras drogas

    OpenAIRE

    Guillermo Castaño Pérez; Eduardo Arango Tobón; Santiago Morales Mesa; Alexander Rodríguez Bustamante; Carolina Montoya Montoya

    2013-01-01

    Introducción: la sexualidad, y el consumo de alcohol y drogas en los adolescentes, figuran en la actualidad como uno de los asuntos con mayor prioridad para la salud pública. La preocupación radica en reducir los riesgos de infecciones de transmisión sexual, el virus de la inmunodeficiencia humana y los embarazos tempranos no deseados. Objetivo: analizar las prácticas sexuales bajo el efecto de alcohol y otras drogas, y los riesgos que esto implica, en los adolescentes de la ciudad de Medellí...

  6. Desarrollo de alimentos tipo snack de bajo contenido graso a partir de discos de manzana verde

    OpenAIRE

    Tavera Quiroz, María José

    2015-01-01

    Esta investigación se basó en el desarrollo de productos tipo snack bajos en grasa a partir de manzana verde Granny Smith (Malus domestica). Se desarrollaron snacks a partir de manzanas verdes estudiando diferentes alternativas de cocción (fritado, horneado o su combinación) con el objetivo de obtener productos con menor contenido graso que los tradicionales pero con las propiedades que los consumidores valoran en los mismos, como el color y la textura crocante. Para ello se analizó...

  7. Estudios biológicos sobre procambarus clarkii girard (decapoda cambaridae) en las marismas del bajo Guadalquivir

    OpenAIRE

    Cano Sánchez, Esperanza

    1994-01-01

    Procambarus clarkii Girard, es un cangrejo de agua dulce, vulgarmente conocido como cangrejo americano o rojo, originario de Estados Unidos (zona Sur central) y México (zona Noreste) (HOBBS, 1972 a). Fue introducido en Las Marismas del Bajo Guadalquivir en 1974 y debido a que presenta una alta tasa de reproducción, actividad excavadora y buena adaptación a zonas con drásticas fluctuaciones temporales en el nivel del agua (HUNER & BARR, 1984 a), en poco tiempo se extendió por toda la marisma. ...

  8. Determinantes sociales de la mortalidad infantil en municipios de bajo índice de desarrollo humano en México

    OpenAIRE

    Duarte-Gómez, María Beatriz; Núñez-Urquiza, Rosa María; Restrepo-Restrepo, José Alonso; López-Collada, Vesta Louise Richardson

    2015-01-01

    ResumenINTRODUCCIÓN: Se realizó un estudio con el objetivo de identificar determinantes sociales de mortalidad infantil en zonas rurales en México, y recomendar estrategias para disminuir esta mortalidad.MÉTODOS: Se tomó una muestra por conveniencia de 16 municipios de bajo índice de desarrollo humano. Se identificaron fallecimientos de menores de un año de edad a través de registros oficiales y de entrevistas con autoridades civiles, personal de salud y líderes comunitarios. También se reali...

  9. Distribución de tensiones tangenciales en vigas de sección constante bajo esfuerzos cortantes

    OpenAIRE

    Fernández, T.; Viaño, J.; Samartín, A.

    2000-01-01

    En este trabajo se analizan algunos resultados obtenidos por Trabucho y Viaño, mediante desarrollos asintótico de las ecuaciones de la elasticidad tridimensional en vigas de sección constante, para la distribución de tensiones tangenciales en una sección transversal bajo la acción de un esfuerzo cortante. Se aplican, con carácter ilustrativo, a vigas con distintos tipos de secciones transversales (rectangular, circular, triangular y perfil UPN) comparando los resultados con los qu...

  10. Selección de portafolios usando simulación y optimización bajo incertidumbre

    Directory of Open Access Journals (Sweden)

    Claudia Lorena Martinez Torres

    2004-01-01

    Full Text Available Los métodos utilizados usualmente en la formación de portafolios, son basados en hipótesis que no son reales en mercados emergentes, y en consecuencia no son aplicables a estos mercados. Ellos no indican la forma en que debe ser conformado el portafolio. Se presenta entonces, una metodología basada en simulación y optimización bajo incertidumbre que permite realizar la conformación del portafolio. Se realizan pruebas en el mercado colombiano y la Bolsa de Nueva York.

  11. Probabilistic calculation of dose commitment from uranium mill tailings

    International Nuclear Information System (INIS)

    1983-10-01

    The report discusses in a general way considerations of uncertainty in relation to probabilistic modelling. An example of a probabilistic calculation applied to the behaviour of uranium mill tailings is given

  12. Effects of Cassava Mill Effluent on Some Chemical and Micro ...

    African Journals Online (AJOL)

    user

    KEY WORDS: Cassava Mill Effluent, Soil Pollution, Soil Properties, Bacteria, Fungi. INTRODUCTION .... The hydrocarbon utilizing bacteria (HUB) were Bacillus substilis and ..... fermentative hydrogen production: A Review Int. J. Hydrogen ...

  13. Noncommutative Yang-Mills from equivalence of star products

    International Nuclear Information System (INIS)

    Jurco, B.; Schupp, P.

    2000-01-01

    It is shown that the transformation between ordinary and noncommutative Yang-Mills theory as formulated by Seiberg and Witten is due to the equivalence of certain star products on the D-brane world-volume. (orig.)

  14. Noncommutative Yang-Mills from equivalence of star products

    Energy Technology Data Exchange (ETDEWEB)

    Jurco, B. [Max-Planck-Institut fuer Mathematik, Bonn (Germany); Schupp, P. [Sektion Physik, Universitaet Muenchen, Theresienstrasse 37, 80333 Muenchen (Germany)

    2000-05-01

    It is shown that the transformation between ordinary and noncommutative Yang-Mills theory as formulated by Seiberg and Witten is due to the equivalence of certain star products on the D-brane world-volume. (orig.)

  15. Rock Characteristics and Ball Mill Energy Requirements at ...

    African Journals Online (AJOL)

    These changes can have great impact on milling operations. ... Goldfields Ghana Limited, Tarkwa Gold Mine (TGM), processes ores which occur in ... The parameters examined had deviated from the design; Work Index (WI) for example was ...

  16. Yang-Mills theory - a string theory in disguise

    International Nuclear Information System (INIS)

    Foerster, D.

    1979-01-01

    An examination of the Schwinger-Dyson equations of U(N) lattice Yang-Mills theory shows that this theory is exactly equivalent to a theory of strings that interact with one another only through their topology. (Auth.)

  17. Visual Inspection for Breakage of Micro-milling Cutter

    Directory of Open Access Journals (Sweden)

    WANG Lei

    2014-11-01

    Full Text Available In order to realize visual inspection for breakage of micro-milling cutter, a developed image acquisition method of the surface of a micro-milling cutter was constructed and a classification method based on multilayer neural network was proposed in this article. While the milling cutter was rotating at a constant speed, a camera was triggered by a rotary encoder to capture a series of images. And the developed image of milling cutter was created by image mosaic algorithms. The moment of regional feature as well as the gray feature of the tooth edge was extracted as the input vector of neural network. The feature vector includes moment of inertia, geometric central moment, three-dimensional invariants moment and the gray value of the projection on two principal axis directions of the tooth region. By designing a proper neural network, breakage defects can be detected 100 %. And the false discovery rate is 0.5 %.

  18. Review of environmental aspects of uranium mill operations: industry's view

    International Nuclear Information System (INIS)

    Beverly, R.G.

    1977-01-01

    Problems faced by uranium mill operators in complying with new environmental regulations and guidelines are discussed. It is pointed out that valid data must be available in order to evaluate impacts on the environment, to determine background radiation levels, to measure the effectiveness of control techniques, and to determine compliance with standards and regulations. Specific problem areas facing mill operators today and some of the unresolved questions include: sampling methods and equipment for radon in ambient air, measurements of radon and radon daughter exposures of people, radon emanation rate meaurements applicable to monitoring mill tailings, the calibration of γ counters, measurements of population doses, regulations concerning mill tailings reclamation nd stabilization, and the comparative value of in-vivo counting and uranium urinary excretion measurements for monitoring personnel

  19. Cosmological coevolution of Yang-Mills fields and perfect fluids

    International Nuclear Information System (INIS)

    Barrow, John D.; Jin, Yoshida; Maeda, Kei-ichi

    2005-01-01

    We study the coevolution of Yang-Mills fields and perfect fluids in Bianchi type I universes. We investigate numerically the evolution of the universe and the Yang-Mills fields during the radiation and dust eras of a universe that is almost isotropic. The Yang-Mills field undergoes small amplitude chaotic oscillations, as do the three expansion scale factors which are also displayed by the expansion scale factors of the universe. The results of the numerical simulations are interpreted analytically and compared with past studies of the cosmological evolution of magnetic fields in radiation and dust universes. We find that, whereas magnetic universes are strongly constrained by the microwave background anisotropy, Yang-Mills universes are principally constrained by primordial nucleosynthesis but the bound is comparatively weak with Ω YM rad

  20. Comparison of hydrogen storage properties of pure Mg and milled ...

    Indian Academy of Sciences (India)

    Administrator

    increase the hydriding and dehydriding rates, pure Mg was ground under hydrogen atmosphere (reactive .... Hydrogen storage properties of pure Mg and milled pure Mg. 833. Figure 3. ... elongated and flat shapes via collisions with the steel.

  1. Biodegradation Potentials of Cassava Mill Effluent (CME) by ...

    African Journals Online (AJOL)

    ADOWIE PERE

    ABSTRACT: The indiscriminate discharge of Cassava mill effluent pose serious ... The study has shown that microbial isolates have the potentials of reducing pollution effect thereby ..... villages in Portharcourt, Rivers State Nigeria. J. Appl. Sci.

  2. Management, stabilisation and environmental impact of uranium mill tailings

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    These proceedings deal with the sources of radioactivity arising from uranium mill wastes, the environmental aspects, the management and stabilisation of radioactive wastes and the policies and regulatory aspects.

  3. Management, stabilisation and environmental impact of uranium mill tailings

    International Nuclear Information System (INIS)

    1978-01-01

    These proceedings deal with the sources of radioactivity arising from uranium mill wastes, the environmental aspects, the management and stabilisation of radioactive wastes and the policies and regularoty aspects

  4. Chemical milling solution produces smooth surface finish on aluminum

    Science.gov (United States)

    Lorenzen, H. C.

    1966-01-01

    Elementary sulfur mixed into a solution of caustic soda and salts produces an etchant which will chemically mill end-grain surfaces on aluminum plate. This composition results in the least amount of thickness variation and pitting.

  5. Auxiliary fields for super Yang-Mills from division algebras

    CERN Document Server

    Evans, Jonathan M.

    1994-01-01

    Division algebras are used to explain the existence and symmetries of various sets of auxiliary fields for super Yang-Mills in dimensions d=3,4,6,10. (Contribution to G\\"ursey Memorial Conference I: Strings and Symmetries)

  6. Waste water treatment of hydrometallurgical mill in mine No. 754

    International Nuclear Information System (INIS)

    Zhang Yiqun

    1997-01-01

    The author briefly introduces some measures to waste water treatment of hydrometallurgical mill of Uranium Mine No. 754. It is shown in practice that making rational use of waste water is advantageous to production, reducing qcost and lightening environment pollution

  7. the quality of locally-manufactured corn- mill grinding plates

    African Journals Online (AJOL)

    User

    sumers of foods prepared from such contaminated milled maize. Keywords: maize ... age of the local plates stem from the fact that they are relatively ..... and also regulates cell growth and differentia- .... with iron supplements”, MCN Am J Ma-.

  8. Homotopy Lie superalgebra in Yang-Mills theory

    International Nuclear Information System (INIS)

    Zeitlin, Anton M.

    2007-01-01

    The Yang-Mills equations are formulated in the form of generalized Maurer-Cartan equations, such that the corresponding algebraic operations are shown to satisfy the defining relations of homotopy Lie superalgebra

  9. Null solution of the Yang-Mills equations

    International Nuclear Information System (INIS)

    Tafel, J.

    1986-05-01

    We investigate the correspondence between null solutions of the Yang-Mills equations and shearfree geodesic null congruences. We give an example of a non-Abelian null solution with twisting rays. (orig.)

  10. Reproductive performance of rabbits fed maize-milling waste based ...

    African Journals Online (AJOL)

    Owner

    The influence of maize-milling waste on the reproductive performance of rabbits was assessed. The .... stored in air-tight polythene bags prior to use in the experimental .... Nutrient digestibility and effect of heat treatment, J. Appl. Rabbit Res.

  11. Simple grain mill boosts production and eases women's workload ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... grain mill boosts production and eases women's workload. 11 janvier 2013. Image ... It aims to increase the production, improve the processing, develop new ... farmer societies, women's self-help groups, and the food-processing industry.

  12. Accelerated aging tests of liners for uranium mill tailings disposal

    International Nuclear Information System (INIS)

    Barnes, S.M.; Buelt, J.L.; Hale, V.Q.

    1981-11-01

    This document describes the results of accelerated aging tests to determine the long-term effectiveness of selected impoundment liner materials in a uranium mill tailings environment. The study was sponsored by the US Department of Energy under the Uranium Mill Tailings Remedial Action Project. The study was designed to evaluate the need for, and the performance of, several candidate liners for isolating mill tailings leachate in conformance with proposed Environmental Protection Agency and Nuclear Regulatory Commission requirements. The liners were subjected to conditions known to accelerate the degradation mechanisms of the various liners. Also, a test environment was maintained that modeled the expected conditions at a mill tailings impoundment, including ground subsidence and the weight loading of tailings on the liners. A comparison of installation costs was also performed for the candidate liners. The laboratory testing and cost information prompted the selection of a catalytic airblown asphalt membrane and a sodium bentonite-amended soil for fiscal year 1981 field testing

  13. Descriptive documentation for New Mexico uranium milling model

    International Nuclear Information System (INIS)

    Bonem, G.; Livevano, R.J.

    1981-01-01

    The New Mexico Uranium Milling Model is a linear programming model. It can demonstrate how cost minimizing management can reduce the costs of milling uranium subject to a series of environmental, resource, and technological constraints. For example, if 15,000 tons were the targeted level of milling output, the model would provide the minimum cost of this production level, given certain levels of environmental, fuel, water, and technological constraints. The model was developed to allow state policymakers to assess the uranium industry from various standpoints. Through the use of the model, state policymakers can determine the effects of air and water discharge standards and limited capital availability on: milling costs of production; uses of electricity, fuel, and water; and levels of air and water emissions. The model covers the following: process technologies which are acid leach and carbonate leach; raw materials mix; air and water discharges; residual treatment process; and plant types

  14. Parametric Study of End Milling Glass Fibre Reinforced Composites

    International Nuclear Information System (INIS)

    Azmi, Azwan I.; Lin, Richard J. T.; Bhattacharyya, Debes

    2011-01-01

    This paper discusses the application of Taguchi 'Design of Experiment' method to investigate the effects of end milling parameters on machinability characteristics of unidirectional E-glass fibre reinforced polymer (GFRP) composites. A series of milling experiments were conducted using tungsten carbide end milling cutters at various spindle speeds, feed rates and depths of cut. Taguchi analysis was carried out and the signal to noise (S/N) ratio with analysis of variance (ANOVA) was employed to analyse the effects of those parameters on GFRP machinability. Overall, the results of the current investigations present some desirable combinations of the machining parameters that can further enhance the end milling machinability characteristics to suit the final requirements of the finished GFRP products.

  15. Effluent controls and environmental monitoring programs for uranium milling operations

    International Nuclear Information System (INIS)

    Maixner, R.D.

    1979-01-01

    Controls will reduce gaseous, particulate, and liquid discharges. Monitoring programs are used to determine effectiveness. The controls and programs discussed are used at Cotter Corporation's Canon City Mill in Colorado. 3 refs

  16. Electric vortex lines from the Yang-Mills theory

    International Nuclear Information System (INIS)

    Nielsen, N.K.; Olesen, P.

    1978-08-01

    The dynamics of an unstable Yang-Mills field mode previously found by the authors is developed. It is argued that this unstable mode corresponds to the transition to a state where electric vortex lines are created. (Auth.)

  17. Epoxy blanket protects milled part during explosive forming

    Science.gov (United States)

    1966-01-01

    Epoxy blanket protects chemically milled or machined sections of large, complex structural parts during explosive forming. The blanket uniformly covers all exposed surfaces and fills any voids to support and protect the entire part.

  18. Integrability of N=3 super Yang-Mills equations

    International Nuclear Information System (INIS)

    Devchand, C.; Ogievetsky, V.

    1993-10-01

    We describe the harmonic superspace formulation of the Witten-Manin supertwistor correspondence for N=3 extended super Yang-Mills theories. The essence in that on being sufficiently supersymmetrised (up to the N=3 extension), the Yang-Mills equations of motion can be recast in the form of Cauchy-Riemann-like holomorphicity conditions for a pair of prepotentials in the appropriate harmonic superspace. This formulation makes the explicit construction of solutions a rather more tractable proposition than previous attempts. (orig.)

  19. The Role of Promotion in Milling and Bakery Products Sales

    OpenAIRE

    Sergiu-Bogdan Constantin

    2009-01-01

    Irrespective of the avenue chosen for the retail of milling and bakery products, a key role in sales growth is the one played by promotion, information of the future customers as to the characteristics of the products, the execution and sale conditions. Such information process takes place by means of the promotional mix, consisting of a blend of advertising, sales promotion, public relations tools, trademarks, promotional events, and sales forces. The milling and baking industry uses, to cer...

  20. Superlocalization formulas and supersymmetric Yang-Mills theories

    International Nuclear Information System (INIS)

    Bruzzo, U.; Fucito, F.

    2004-01-01

    By using supermanifolds techniques we prove a generalization of the localization formula in equivariant cohomology which is suitable for studying supersymmetric Yang-Mills theories in terms of ADHM data. With these techniques one can compute the reduced partition functions of topological super-Yang-Mills theory with 4, 8 or 16 supercharges. More generally, the superlocalization formula can be applied to any topological field theory in any number of dimensions

  1. Environmental Development Plan: uranium mining, milling, and conversion

    International Nuclear Information System (INIS)

    1979-08-01

    This Environmental Development Plan (EDP) identifies the planning and management requirements and schedules needed to evaluate and assess the environmental, health, and safety (EH and S) aspects of the uranium mining, milling, and conversion technologies. The plan represents the collective perceptions of EH and S concerns and requirements and knowledge of ongoing research programs of most of the Federal agencies involved in significant EH and S R and D program management, standards setting, or regulatory activities associated with uranium mining, milling, and conversion

  2. Towards the general solution of the Yang-Mills equations

    International Nuclear Information System (INIS)

    Helfer, A.D.

    1985-01-01

    The author presents a new non-perturbative technique for finding arbitrary self-dual solutions to the Yang-Mills equations, and of describing massless fields minimally coupled to them. The approach uses techniques of complex analysis in several variables, and is complementary to Ward's: it is expected that a combination of the two techniques will yield general, non-self-dual solutions to the Yang-Mills equations. This has been verified to first order in perturbation theory

  3. Site selection and general layout of heap leaching uranium mill

    International Nuclear Information System (INIS)

    Zhang Chunmao; Rongfeng

    2011-01-01

    The site selection and general layout of uranium mill is an important work in the design and consultation stage of uranium mining and metallurgy's engineering construction. Based on the design practices, the principles and methods for the site selection and general layout of heap leaching uranium mill are analyzed and studied. Some problems which should be paid much attention to in the design are discussed in hopes of providing a useful reference for the design and consultation of similar projects. (authors)

  4. Instability of higher dimensional Yang-Mills systems

    International Nuclear Information System (INIS)

    Randjbar-Daemi, S.; Strathdee, J.

    1983-01-01

    We investigate the stability of Poincare xO(3) invariant solutions for a pure semi-simple Yang-Mills, as well as Yang-Mills coupled to gravity in 6-dimensional space-time compactified over M 4 xS 2 . In contrast to the Maxwell U(1) theory (IC-82/208) in six dimensions coupled with gravity and investigated previously, the present theory exhibits tachyonic excitations and is unstable. (author)

  5. Yang-Mills-Vlasov system in the temporal gauge

    International Nuclear Information System (INIS)

    Choquet-Bruhat, Y.; Noutchegueme, N.

    1991-01-01

    We prove a local in time existence theorem of a solution of the Cauchy problem for the Yang-Mills-Vlasov integrodifferential system. Such equations govern the evolution of plasmas, for instance of quarks and gluons (quagmas), where non abelian gauge fields and Yang-Mills charges replace the usual electromagnetic field and electric charge. We work with the temporal gauge and use functional spaces with appropriate weight on the momenta, but no fall off is required in the space direction [fr

  6. Dynamical CP violation of the generalized Yang-Mills model

    International Nuclear Information System (INIS)

    Wang Dianfu; Chang Xiaojing; Sun Xiaoyu

    2011-01-01

    Starting from the generalized Yang-Mills model which contains, besides the vector part V μ , also a scalar part S and a pseudoscalar part P . It is shown, in terms of the Nambu-Jona-Lasinio (NJL) mechanism, that CP violation can be realized dynamically. The combination of the generalized Yang-Mills model and the NJL mechanism provides a new way to explain CP violation. (authors)

  7. Superspace gauge fixing of topological Yang-Mills theories

    Energy Technology Data Exchange (ETDEWEB)

    Constantinidis, Clisthenis P; Piguet, Olivier [Universidade Federal do Espirito Santo (UFES) (Brazil); Spalenza, Wesley [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro (Brazil)

    2004-03-01

    We revisit the construction of topological Yang-Mills theories of the Witten type with arbitrary space-time dimension and number of ''shift supersymmetry'' generators, using a superspace formalism. The super-BF structure of these theories is exploited in order to determine their actions uniquely, up to the ambiguities due to the fixing of the Yang-Mills and BF gauge invariance. UV finiteness to all orders of perturbation theory is proved in a gauge of the Landau type. (orig.)

  8. Superspace gauge fixing of topological Yang-Mills theories

    International Nuclear Information System (INIS)

    Constantinidis, Clisthenis P.; Piguet, Olivier; Spalenza, Wesley

    2004-01-01

    We revisit the construction of topological Yang-Mills theories of the Witten type with arbitrary space-time dimension and number of ''shift supersymmetry'' generators, using a superspace formalism. The super-BF structure of these theories is exploited in order to determine their actions uniquely, up to the ambiguities due to the fixing of the Yang-Mills and BF gauge invariance. UV finiteness to all orders of perturbation theory is proved in a gauge of the Landau type. (orig.)

  9. Perovskite nanoparticles: Preparation by reactive milling and magnetic characteristics

    International Nuclear Information System (INIS)

    Phuc, N.X.; Nguyen, Ha M.; Manh, D.H.; Hung, L.T.; Tuong, L.T.C.; Hong, L.V.; Yao, Yeong-Der

    2006-01-01

    La 0.7 Sr 0.3 MnO 3 and La 0.7 Ca 0.3 MnO 3 nanoparticles were synthesized by reactive milling method. Grain size determined from XRD, TEM, and magnetization measurements show an average diameter ≤18 nm and decreasing with increasing milling time. DC and AC magnetic measurements evidenced an interacting superparamagnetism due to clustering of perovskite nanoferromagnets with spin dynamic time in range of 10 -9 -10 -10 s

  10. Population and economy in the Bajo Ebro in Roman times. Basic concepts for a rural landscape model | Poblamiento y economía en el Bajo Ebro en época romana. Bases para un modelo de paisaje rural

    Directory of Open Access Journals (Sweden)

    Víctor Revilla Calvo

    1994-12-01

    Full Text Available This paper analyses the settlement patterns and the social-economic structures in Bajo Ebro in Roman times. It covers especifically relationships among settlements, rural landscape, structures of agricultural production and landowning. Likewise, the origin and historical evolution of these structures are studied, as well as their role within a broader political, social and economic framework in the Province of Tarraconensis. | El artículo analiza las formas del poblamiento y las estructuras socio-económicas del Bajo Ebro en época romana. Se plantean, en particular, las relaciones entre la distribución del habitat, el paisaje rural, las estructuras de la producción agrícola y de la propiedad. Se analiza igualmente el origen y evolución histórica de estas estructuras, así como su integración en un marco político, social y económico más amplio, constituido por la provincia Tarraconense.

  11. A study on rheological characteristics of roller milled fenugreek fractions.

    Science.gov (United States)

    Sakhare, Suresh D; Inamdar, Aashitosh A; Prabhasankar, P

    2016-01-01

    Fenugreek seeds were fractionated by roller milling to get various fractions. The roller milled fractions and whole fenugreek flour (WFF) were evaluated for the flow behavior and time-dependent flow properties using a rotational viscometer at the temperatures of 10-60 (0)C. The samples subjected to a programmed shear rate increase linearly from 0 to 300 s(-1) in 3 min and successive decrease linearly shear rate from 300 s(-1) to 0 in 3 min. The roller milled fractions and WFF paste exhibited non-Newtonian pseudoplastic behavior. Difference in hysteresis loop area was observed among the roller milled fractions and WFF, being more noticeable at lower temperatures. Power law and Casson models were used to predict flow properties of samples. The power law model described well the flow behavior of the roller milled fractions and WFF at temperatures tested. Except flour (FL) fraction, consistency coefficient, m, increased with the temperature both in the forward and backward measurements. The roller milled fractions and WFF exhibited rheopectic behavior that increased viscosity with increasing the shear speed and the temperature. For all the sample tested, initial shear stress increased with increase in shear rate and temperature.

  12. Radiation health and safety aspects in uranium milling

    International Nuclear Information System (INIS)

    Smart, B.C.

    1982-01-01

    This presentation deals mainly with radiation levels associated with the uranium milling operations, including yellowcake production. The regulation of uranium mills has not received much attention in the past because radiation levels have been generally low, and uranium milling has been substantially free of occupational illness. More attention is being directed towards minimizing exposures, and the Canadian Atomic Energy Control Board is working on new regulations which will reflect the recommendations of various hearings and the International Commission on Radiological Protection. Emphasis is now being placed on improving monitoring methods. At the beginning of 1982 a gamma dosimetry program will be put into effect for all uranium mine and mill workers. An improved method is also being sought to determine radon daughter exposures more accurately. It is expected that a better knowledge of monitoring and assessing thoron daughter levels in mine and mill facilities will be obtained soon. This radiation contribution will be included when calculating a combined radiation exposure factor for individual workers. Programs are underway to better monitor and assess uranium dust inhalation. Initial studies indicate that the present precautions taken to avoid dust inhalation at the mills are effective. A more complete study will be undertaken in 1982

  13. Degree of Milling Effect on Cold Water Rice Quality

    Directory of Open Access Journals (Sweden)

    Ujjwol Subedi

    2018-05-01

    Full Text Available The aim of this study was to examine the effects of degree of milling on various rice parameters such as proximate composition, and cooking properties using mathematical model. The experiments were performed in the laboratory of Food Research Division, Nepal Agricultural Research Council. The three different medium type rice varieties of Nepal (Lumle-2, Chhomrong and Machhapuchre-3 were exposed to five different degrees of milling (0%, 6%, 8%, 10% and 12%. The degree of milling (DM level significantly (P≤0.05 affected the milling recovery; head rice yield, nutrient content as well as cooking properties of the rice. Increase in DM resulted in further reduction of protein content, fat content, minerals, milled rice and head rice yield after bran layer was further removed. A positive correlation between DM used in present model, amylose content, kernel elongation and gruel solid loss was observed, however, with an increase in DM; amylose content, kernel elongation and gruel solid loss were found to be increased. Adopting 6 to 8% DM for commercial milling of rice might help to prevent quantitative, qualitative and nutritional loss along with retention of good cooking characteristics.

  14. Replacing chemicals in recycle mills with mechanical alternatives

    Energy Technology Data Exchange (ETDEWEB)

    Institute of Paper Science Technology

    2002-07-01

    A high-intensity spark fired underwater decomposes a small amount of the water into hydroxyl radicals, which are strong oxidants. These are able to oxidize contaminants such as glue and wood pitch that enter paper recycling mills as a part of the incoming furnish and cost the industry several hundred million dollars. The sparking technique is safe, inexpensive, and is capable of treating large volumes of water, which makes it attractive for mill applications. Several mill trials were run. Sparking caused a decrease in the tack of the deposits in one case. Lower bleach use occurred in two other mills; sparking reduced the degree of ink reattachment to fiber. The payback for either application is attractive. Sparking induced deposition of contaminants in another mill, which is a positive development--if it can be controlled. The technique is also able to degas water and to oxidize odor-causing sulfur compounds. Although one unit has been purchased by a mill, second-order effects caused by the technology needs to be defined further before the technology can be broadly applied.

  15. Cleaning up commingled uranium mill tailings: is Federal assistance necessary

    International Nuclear Information System (INIS)

    1979-01-01

    GAO was asked to determine whether Federal assistance should be given to operating mill owners that have processed uranium for sale to both government and industry and, thus, generated residual radioactive wastes. The wastes generated for both government and commercial use are called commingled uranium mill tailings. GAO recommends that the Congress provide assistance to active mill owners to share in the cost of cleaning up that portion of the tailings which were produced under Federal contract. Further, GAO believes that the Congress should also consider having the Federal government assist those mills who acted in good faith in meeting all legal requirements pertaining to controlling the mill tailings that were generated for commercial purposes and for which the Federal government is now requiring retroactive remedial action. At the same time, the Congress should make sure that this action establishes no precedent for the Federal government assuming the financial responsibility of cleaning up other non-Federal nuclear facilities and wastes, including those mill tailings generated after the date when the Federal government notified industry that the failings should be controlled

  16. Cluff Lake mill operations - a historical review

    International Nuclear Information System (INIS)

    Schnell, H.A.; Doell, E.; Corpus, E.

    2000-01-01

    The Cluff Lake operation started uranium production in 1980 and has produced over 50 million pounds of uranium since that time. The plant started with high grade ore (+30% U) processing and went through a series of modifications to its present operating status: Phase 1 - High-grade ore (+30% U) processing with acid leach and iron cake precipitation followed by direct yellowcake precipitation. Lower grade ore was concentrated in a gravity circuit to +30% U; Phase 1 1/2 - Reprocessing Phase 1 gravity tailings (+1% U) in an acid leach circuit with solvent extraction purification prior to yellowcake precipitation; Reprocessing of the Phase 1 leach tails (58 g/t Au) to recover gold in a Cyanide/CIP circuit followed by additional uranium recovery, and destruction and recycle of cyanide by volatilization; and Phase 2 - Treatment of the lower grade ore (0.5 to 1% U) at an increased tonnage with an acid leach, CCD, SX circuit as it is found in the existing plant. This paper will review the various processing circuits used during the phases of the Cluff Lake Mill from first uranium production to the present operation. (author)

  17. Electrochemical treatment of olive oil mill wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Longhi, P.; Fiori, G [Milan Univ., Milan (Italy). Dept. of Physical Chemistry and Electrochemistry; Vodopivec, B. [Milan Univ. Bicocca, Milan (Italy). Dept. of Biotechnologies and Biosciences

    2001-04-01

    The possibility of oxidizing at a PbO{sub 2} anode the phenols and polyphenols, present in the olive oil mill wastewater, has been studied as a pre-treatment for the submission of such wastewater to the traditional biological treatments. The results obtained operating at current densities ranging 500 to 2000 A/m{sup 2} show that it is possible to reduce the concentration of the phenolic components, which interfere with the biological treatments, down to low values without decreasing too much the total organic content of the wastewater. [Italian] E' stata studiata la possibilita' di ossidare anodicamente i componenti fenolici delle acque reflue di frantoio, quale pretrattamento delle stesse prima del loro invio ai processi di trattamento biologico. I risultati ottenuti impiegando PbO{sub 2} quale materiale anodico e operando con densita' di corrente comprese tra 500 e 2000 A/m{sup 2} mostrano come sia possibile eliminare, o almeno diminuire sino a concentrazioni accettabili, dalle acque di frantoio i fenoli e i polifenoli, che interferiscono con i normali trattamenti biologici, senza diminuire eccessivamente il carico organico totale.

  18. Uranium mill tailings backfill management. Final report

    International Nuclear Information System (INIS)

    Thomson, B.M.; Heggen, R.J.

    1984-01-01

    Backfilling, the disposal of spent uranium mill tailings in empty mine stopes, has been practiced in the Grants Mineral Belt of New Mexico for nearly 20 years. The principal objective of backfilling is the prevention of roof collapse and hydraulic connection with overlying aquifers, increasing mine dewatering requirements. Backfilling is accomplished by gravity feed of a slurry of sand-fraction tailings and treated mine water into the slope. The effects of backfilling on surface discharge of mine wastewater are negligible due to the small fraction of the total flow represented by slurry decant. Furthermore, quality of the decant is not significantly below that of other mine waters. Groundwater effects of backfilling may be classified as short-term (while the mine is operational) and long-term (after dewatering operations have been terminated). Short-term effects are insignificant because of rapid and continuous flow to the mine sump. Long-term effects on aquifer water quality are predicted to be minimal due to (1) the small amount of slurry liquor present after drainage, (2) the precipitation of SO 4 and CO 3 phases, and (3) the reestablishment of reducing conditions and subsequent precipitation of major contaminants including U, As, Mo, Se, and V. 28 references, 19 figures, 9 tables

  19. Catalytic pyrolysis of olive mill wastewater sludge

    Science.gov (United States)

    Abdellaoui, Hamza

    From 2008 to 2013, an average of 2,821.4 kilotons/year of olive oil were produced around the world. The waste product of the olive mill industry consists of solid residue (pomace) and wastewater (OMW). Annually, around 30 million m3 of OMW are produced in the Mediterranean area, 700,000 m3 year?1 in Tunisia alone. OMW is an aqueous effluent characterized by an offensive smell and high organic matter content, including high molecular weight phenolic compounds and long-chain fatty acids. These compounds are highly toxic to micro-organisms and plants, which makes the OMW a serious threat to the environment if not managed properly. The OMW is disposed of in open air evaporation ponds. After evaporation of most of the water, OMWS is left in the bottom of the ponds. In this thesis, the effort has been made to evaluate the catalytic pyrolysis process as a technology to valorize the OMWS. The first section of this research showed that 41.12 wt. % of the OMWS is mostly lipids, which are a good source of energy. The second section proved that catalytic pyrolysis of the OMWS over red mud and HZSM-5 can produce green diesel, and 450 °C is the optimal reaction temperature to maximize the organic yields. The last section revealed that the HSF was behind the good fuel-like properties of the OMWS catalytic oils, whereas the SR hindered the bio-oil yields and quality.

  20. Domestic uranium mining and milling industry 1989

    International Nuclear Information System (INIS)

    1990-01-01

    Section 170B of the Atomic Energy Act of 1954, as amended by Public Law 97-415, requires that the Secretary of Energy submit to Congress an annual assessment of the viability of the domestic uranium mining and milling industry. The Energy Information Administration (EIA) of the Department of Energy (DOE) was assigned the responsibility to develop the criteria for use in estimating the viability of the industry. These criteria include four major attributes of industry viability - resource capability, supply response capability, financial capability, and import commitment dependency. Having established these criteria, the Secretary of Energy is required to monitor the industry and make an annual assessment of its viability for 1983 through 1992. The first six assessments were issued in the years 1984 through 1989 based on information available for 1983 through 1988, respectively. The current report provides the data and analyses, based on the information available through the end of the calendar year 1989, supporting the seventh annual assessment of the uranium industry's viability. It presents information on the four major attributes. Data on past and present industry behavior, as well as projections of the future status of the industry (assuming current market conditions), were used to examine the industry's ability to respond, over a 10-year period, to two hypothetical supply disruption scenarios. 20 figs., 23 tabs

  1. LOCAL GENIUS AS SOCIO-CULTURAL CAPITAL FOR EMPOWERING THE BAJO ETHNIC PEOPLE RESIDING AT THE COASTAL AREA OF BUNGIN PERMAI VILLAGE, SOUTH EAST SULAWESI

    Directory of Open Access Journals (Sweden)

    La Ode Ali Basri

    2012-11-01

    Full Text Available In this dissertation the local genius as socio-cultural capital for empowering theBajo ethnic people residing at the costal area of Bungin Permai Village, TinanggeaDistrict, South Konawe Regency, South Sulawesi Province is discussed. The Bajo ethnicpeople have a set of local genius within their socio-cultural system which is reflected intheir belief, tradition and custom and is used as the reference for conceiving andexplaining the objective and essence of life and the world. However, such local geniushas not functioned optimally yet as they are still marginalized.This research is focused on (1 what forms of local genius serve as the sociocultural capital for empowering the Bajo ethnic group residing at the coastal area?; (2how the local genius is developed to empower the Bajo ethnic people residing at thecoastal area?; and (3 what factors which may support and obstruct the local genius usedas the socio cultural capital for empowering the Bajo ethnic people residing at the coastalarea? Qualitative method is employed in this study with the approach of cultural studies.The theories used are the post colonial theory, structural theory, generative theory,hegemony theory and semiotic theory. The techniques used for collecting the data neededare participative observation, in-depth interview, library research, and focus groupdiscussion. The data obtained are analytically and descriptively processed and arepresented in the forms of narration, tables and visual illustration.The results of the study show that the Bajo ethnic people residing at BunginPermai Village have a set of local genius which may be potentially used as the sociocultural capital for empowering their community such as (1 indigenous skills andknowledge; (2 working culture; and (3 local organizations. The development of theindigenous skills and knowledge (pengetahuan dan ketrampilan asli; hereon abbreviatedto PKA and the revitalization of their local organizations may be used as the

  2. Análisis multifactorial de los factores de riesgo de bajo peso al nacer en Salvador, Bahia

    Directory of Open Access Journals (Sweden)

    Solla Jorge José Santos Pereira

    1997-01-01

    Full Text Available El presente estudio constituye un análisis multifactorial de los factores de riesgo de bajo peso al nacer en un grupo de recién nacidos en una zona urbana del Brasil. Se incluyeron en el estudio un total de 1 023 nacidos vivos, dados a luz en cuatro maternidades de Salvador, Bahia, entre julio de 1987 y febrero de 1988. Las fuentes de información fueron las historias clínicas y las entrevistas con las madres en la maternidad. El análisis se realizó mediante regresión logística. En el modelo final los factores de riesgo incluidos fueron los siguientes: edad materna menos de 21 años o más de 35; edad gestacional menos de 38 semanas; resultado desfavorable del embarazo anterior; intervalo intergenésico previo de 12 meses o menos; tabaquismo; e hipertensión. Se presentan los valores del riesgo atribuible poblacional para los factores de riesgo incluidos en el modelo final. Esos factores deben emplearse para detectar a las gestantes con alto riesgo de dar a luz un niño de bajo peso, a las que debe brindarse mayor atención prenatal.

  3. Bajo peso al nacer y embarazo en la adolescencia en cinco consultorios del médico de la familia

    Directory of Open Access Journals (Sweden)

    Ramón Pérez Queda

    1995-06-01

    Full Text Available Se realizó un estudio de 120 embarazadas en un área de 5 consultorios del médico de la familia en un período que comprendió de enero de 1987 a enero de 1990; de ellas, 56 eran menores de 20 años para el 46,6 %. Se realizó un estudio comparativo entre éstas y las gestantes de más de 20 años de edad, y se observó que las adolescentes presentaron mayor número de recién nacidos con bajo peso (88 % y partos pretérminos. El consumo del tabaco y la desnutrición materna fueron factores importantes que se añadieron a la adolescencia en el resultado del bajo peso al nacer.A study was performed on 120 pregnant women in an area of 5 medical offices of the Family Doctor plan from January 1987 to January 1990. Of them 56 were under 20 years of age accounting for 46,6 %. A comparative study was carried out between this group and pregnant women over 20 years, and it was observed that teenagers had a greater number of low birth weight infants (88 % and preterm deliveries. Smoking and maternal malnutrition were considered as very important factors in addition to adolescence for low birth weight.

  4. Estudio del comportamiento de la escayola reforzada con fibras de sisal, para componentes en viviendas de bajo coste

    Directory of Open Access Journals (Sweden)

    de Oteiza San José, Ignacio

    1993-08-01

    Full Text Available The present article is a brief description of the work done for the elaboration of the doctoral thesis and its conclusions. Starting from the possibilities of using plaster in developing countries, due to its abundance and low cost, a series of mechanical tests have been carried out in order to learn about the physical and mechanical properties of plaster reinforced with sisal fibres for its future use in components for low cost housing.

    El presente artículo es una breve descripción de los trabajos realizados para la elaboración de la tesis doctoral y de las conclusiones de la misma. Partiendo de las posibilidades de utilización en los países en vías de desarrollo del material de escayola, por su abundancia y bajo coste, se llevan a cabo una serie de ensayos mecánicos, con el fin de conocer las propiedades físicas y mecánicas de la escayola reforzada con fibras de sisal, para una futura aplicación en componentes para viviendas de bajo coste.

  5. Completion of the uranium mill tailings remedial project and cleanup of the former mill site at Grand Junction, Colorado

    International Nuclear Information System (INIS)

    Rael, G.J.; Cox, S.W.; Artiglia, E.W.

    2000-01-01

    The United States Department of Energy's Uranium Mill Tailings Remedial Action (UMTRA) Surface Project has successfully completed the cleanup of 22 former uranium mill sites, more than 5400 vicinity properties, and has constructed 18 entombment cells. The Project has recently received the United States Nuclear Regulatory Commission's approval and certification for the last two disposal sites, with these sites being placed under the general license for long term custodial care of residual radioactive material. The UMTRA site located at Grand Junction, Colorado is a good example of the technical, political, economic, and public relations challenges that were overcome in achieving success. The UMTRA Team discussed, negotiated, planned, and eventually acted on this uranium mill tailings problem and brought the project to a successful conclusion for the community. From the early 1940s through the 1970s, uranium ore was mined in significant quantities under United States federal contracts for the government's national defence programmes, i.e. the Manhattan Engineering District and Atomic Energy Commission programmes. The problem started as the need for uranium decreased in the late 1960s, resulting in mills shutting down, leaving behind large quantities of process waste tailings and contaminated mill buildings. The former Climax Uranium Company mill site in Grand Junction was one of the largest of these sites. (author)

  6. Tool Wear Analysis on Five-Axis Flank Milling for Curved Shape Part – Full Flute and Ground Shank End Mill

    Directory of Open Access Journals (Sweden)

    Syahrul Azwan Sundi

    2017-01-01

    Full Text Available This paper is a study on full flute (extra-long tool and ground shank end mill wear analysis by utilizing five-axis CNC to implement flank milling strategy on curved shape part. Five-axis machining eases the user to implement variations of strategy such as flank milling. Flank milling is different from point milling. Point milling cuts materials by using the tip of the tool whereas the flank milling uses the cutting tool body to cut material. The type of cutting tool used was end mill 10 mm diameter with High Speed Steel (HSS material. One factor at a time was utilized to analyze the overall data. Feed rate and spindle speed were the two main factors that been set up equally for both full flute and ground shank end mill. At the end of this research, the qualitative analysis based on tool wear between full flute and ground shank end mill is observed. Generally, both types of cutting tools showed almost the same failure indication such as broken edge or chipped off edge, formation of pinned hole on the surface and serration formation or built-up edge (BUE on the primary flute. However, the results obtained from the enlarged images which were captured by Optical Microscope indicated that, the ground shank end mill is better than the full flute end mill.

  7. Uranium Mill Tailings Remedial Action 1993 Roadmap

    International Nuclear Information System (INIS)

    1993-01-01

    The 1993 Roadmap for the Uranium Mill Tailings Remedial Action (UMTRA) Project office is a tool to assess and resolve issues. The US Department of Energy (DOE) UMTRA Project Office uses the nine-step roadmapping process as a basis for Surface and Groundwater Project planning. This is the second year the Roadmap document has been used to identify key issues and assumptions, develop logic diagrams, and outline milestones. This document is a key element of the DOE planning process. A multi-interest group used the nine-step process to focus on issues, root cause analysis and resolutions. This core group updated and incorporated comments on the basic assumptions, then used these assumptions to identify issues. The list of assumptions was categorized into the following areas: institutional, regulatory compliance, project management, human resource requirements, and other site-specific assumptions. The group identified 10 issues in the analysis phase. All of the issues are ranked according to importance. The number one issue from the 1992 Roadmap, ''Lack of sufficient human resources,'' remained the number one issue in 1993. The issues and their ranking are as follows: Lack of sufficient human resources; increasing regulatory requirements; unresolved groundwater issues; extension of UMTRCA through September 30, 1998; lack of post-UMTRA and post-cell closure policies; unpredictable amounts and timing of Federal funding; lack of regulatory compliance agreements; problem with states providing their share of remedial action costs; different interests and priorities among participants; and technology development/transfer. The issues are outlined and analyzed in detail in Section 8.0, with a schedule for resolution of these issues in Section 9.0

  8. On maximally supersymmetric Yang-Mills theories

    International Nuclear Information System (INIS)

    Movshev, M.; Schwarz, A.

    2004-01-01

    We consider ten-dimensional supersymmetric Yang-Mills theory (10D SUSY YM theory) and its dimensional reductions, in particular, BFSS and IKKT models. We formulate these theories using algebraic techniques based on application of differential graded Lie algebras and associative algebras as well as of more general objects, L ∞ - and A ∞ -algebras. We show that using pure spinor formulation of 10D SUSY YM theory equations of motion and isotwistor formalism one can interpret these equations as Maurer-Cartan equations for some differential Lie algebra. This statement can be used to write BV action functional of 10D SUSY YM theory in Chern-Simons form. The differential Lie algebra we constructed is closely related to differential associative algebra (Ω,∂) of (0,k)-forms on some supermanifold; the Lie algebra is tensor product of (Ω,) and matrix algebra. We construct several other algebras that are quasiisomorphic to (Ω,∂) and, therefore, also can be used to give BV formulation of 10D SUSY YM theory and its reductions. In particular, (Ω,∂) is quasiisomorphic to the algebra (B,d), constructed by Berkovits. The algebras (Ω 0 ,∂) and (B 0 ,d) obtained from (Ω,∂) and (B,d) by means of reduction to a point can be used to give a BV-formulation of IKKT model. We introduce associative algebra SYM as algebra where relations are defined as equations of motion of IKKT model and show that Koszul dual to the algebra (B 0 ,d) is quasiisomorphic to SYM

  9. Environmental control technology for mining, milling, and refining thorium

    International Nuclear Information System (INIS)

    Weakley, S.A.; Blahnik, D.E.; Young, J.K.; Bloomster, C.H.

    1980-02-01

    The purpose of this report is to evaluate, in terms of cost and effectiveness, the various environmental control technologies that would be used to control the radioactive wastes generated in the mining, milling, and refining of thorium from domestic resources. The technologies, in order to be considered for study, had to reduce the radioactivity in the waste streams to meet Atomic Energy Commission (10 CFR 20) standards for natural thorium's maximum permissible concentration (MPC) in air and water. Further regulatory standards or licensing requirements, either federal, state, or local, were not examined. The availability and cost of producing thorium from domestic resources is addressed in a companion volume. The objectives of this study were: (1) to identify the major waste streams generated during the mining, milling, and refining of reactor-grade thorium oxide from domestic resources; and (2) to determine the cost and levels of control of existing and advanced environmental control technologies for these waste streams. Six potential domestic deposits of thorium oxide, in addition to stockpiled thorium sludges, are discussed in this report. A summary of the location and characteristics of the potential domestic thorium resources and the mining, milling, and refining processes that will be needed to produce reactor-grade thorium oxide is presented in Section 2. The wastes from existing and potential domestic thorium oxide mines, mills, and refineries are identified in Section 3. Section 3 also presents the state-of-the-art technology and the costs associated with controlling the wastes from the mines, mills, and refineries. In Section 4, the available environmental control technologies for mines, mills, and refineries are assessed. Section 5 presents the cost and effectiveness estimates for the various environmental control technologies applicable to the mine, mill, and refinery for each domestic resource

  10. 76 FR 2409 - Proclaiming Certain Lands, Golf Course Acquisition, as an Addition to the Bay Mills Indian...

    Science.gov (United States)

    2011-01-13

    ... Acquisition, as an Addition to the Bay Mills Indian Reservation for the Bay Mills Indian Community of Michigan..., more or less, to be added to the Bay Mills Indian Reservation for the Bay Mills Indian Community of... the land described below. The land was proclaimed to be an addition to the Bay Mills Indian...

  11. 77 FR 54607 - Proclaiming Certain Lands, Sugar Parcel Lands, as an Addition to the Bay Mills Indian Reservation...

    Science.gov (United States)

    2012-09-05

    ..., as an Addition to the Bay Mills Indian Reservation for the Bay Mills Indian Community of Michigan... acres, more or less, to be added to the Bay Mills Indian Reservation for the Bay Mills Indian Community... the land described below. The land was proclaimed to be an addition to the Bay Mills Indian...

  12. 76 FR 2409 - Proclaiming Certain Lands, Lots 15 and 16 Acquisition, as an Addition to the Bay Mills Indian...

    Science.gov (United States)

    2011-01-13

    ... Acquisition, as an Addition to the Bay Mills Indian Reservation for the Bay Mills Indian Community of Michigan..., more or less, to be added to the Bay Mills Indian Reservation for the Bay Mills Indian Community of... the land described below. The land was proclaimed to be an addition to the Bay Mills Indian...

  13. 77 FR 54607 - Proclaiming Certain Lands, Dafter Parcel, as an Addition to the Bay Mills Indian Reservation for...

    Science.gov (United States)

    2012-09-05

    ... an Addition to the Bay Mills Indian Reservation for the Bay Mills Indian Community of Michigan AGENCY..., more or less, to be added to the Bay Mills Indian Reservation for the Bay Mills Indian Community of... the land described below. The land was proclaimed to be an addition to the Bay Mills Indian...

  14. 76 FR 52011 - Proclaiming Certain Lands, Forest Service Lands, as an Addition to the Bay Mills Indian...

    Science.gov (United States)

    2011-08-19

    ... Lands, as an Addition to the Bay Mills Indian Reservation for the Bay Mills Indian Community of Michigan... acres, more or less, to be added to the Bay Mills Indian Reservation for the Bay Mills Indian Community... the land described below. The land was proclaimed to be an addition to the Bay Mills Indian...

  15. Swedish Pulp Mill Biorefineries. A vision of future possibilities

    Energy Technology Data Exchange (ETDEWEB)

    Berntsson, Thore (Chamers Univ. of Technology, Goeteborg (Sweden)); Axegaard, Peter; Backlund, Birgit; Samuelsson, Aasa; Berglin, Niklas; Lindgren, Karin (STFI-Packforsk, Stockholm (Sweden))

    2008-07-01

    Today, modern science could make it possible to develop techniques for refining almost the whole wood-matter, pulp mill side streams and bark compounds into platform chemicals, electricity, high quality fuels and structured feed-stock for chemicals and materials. The major challenge is to convert the state of basic scientific knowledge into industrial practise. Our definition of an integrated biorefinery is: 'Full utilization of the incoming biomass and other raw materials for simultaneous and economically optimized production of fibres, chemicals and energy'. Examples of products from a pulp mill biorefinery are: Chemicals and Materials (Phenols, adhesives, carbon fibres, activated carbon, binders, barriers, adhesives, antioxidants, surfactants, chelants, solvents, adhesives surfactants, descaling agents, specialty polymers, pharmaceuticals, nutraceuticals, cosmetics etc., Biofuels (pellets, lignin fuel, methanol, DME, ethanol etc), Electricity (BLGCC, condensing power etc.). The new or increased amounts of traditional products can be made from internal and/or external biomass. Three different levels can be identified: A high degree of energy saving in future mills, especially chemical pulp mills, will lead to large amounts of excess internal biomass which can be transferred to products mentioned above, Components in e.g. the black liquor, forest residues and bark can be upgraded to more valuable ones and the energy balance of the mill is kept through fuel import, wholly or partly depending on the level of mill energy efficiency. This imported fuel can be biomass or other types. External (imported) biomass (in some cases together with excess internal biomass) can be upgraded using synergy effects of docking this upgrading to a pulp mill. Electricity has been included as one of the possible biorefinery products. The electricity production in a mill can be increased in several ways which cannot be directly considered as biorefineries, e.g. recovery boiler

  16. Influencia del bajo peso al nacer en el estado de salud durante el primer año

    Directory of Open Access Journals (Sweden)

    Orlando Ortiz Silva

    1997-08-01

    Full Text Available Se realizó un trabajo descriptivo-retrospectivo sobre la influencia del bajo peso al nacer en el estado de salud al año de edad en el municipio Jaruco, desde el 1ro. de enero de 1994 hasta el 31 de diciembre de 1995. Se estudiaron 2 grupos de niños: grupo 1: formado por 55 niños con peso menor de 2 500 g en el período estudiado y grupo 2: escogidos del resto de nacidos con peso superior a los 2 500 g, numéricamente similar. Se concluye que los niños con bajo peso al nacer no muestran diferencias en el desarrollo físico al año de edad, pero sí aumento en los índices de morbilidad ambulatoria y hospitalaria por infecciones respiratorias agudas, enfermedades diarreicas agudas, sepsis urinaria y anemia, así como un peso importante en la mortalidad infantil. Se recomiendan actividades de promoción y prevención para disminuir el bajo peso al nacer.A descriptive and retrospective study about the influence of low birth weight on the health status during the first year of life was conducted in the municipality of Jaruco from January 1, 1994, to december, 1995. Two gruops of children were analyzed: the first group was composed of 55 infants with less than 2 500 g in the studied period, and in the second group there was a similar amount of infants selected from the rest of those who were born with more than 2 500 g. It is concluded that infants with low birth weight show no differences in their physical development, but that there is an increase in the indexes of ambulatory and hospital morbidity resulting from respiratory tract infections, acute diarrheal diseases, urinary sepsis and anemia. It is also demonstrated the importance of promotion and prevention to reduce low birth weight.

  17. Caracterización nutricional del cactus nopal (Opuntia ficus-indica bajo diferentes tratamientos de fertilización

    Directory of Open Access Journals (Sweden)

    Carlos Eduardo Rodríguez-M.

    2011-02-01

    Full Text Available Nuestro planeta se enfrenta actualmente a grandes cambios en su ambiente natural, no sólo como consecuencia de su evolución, sino también del acelerado proceso de degradación antrópica. Dentro de este contexto se origina la necesidad de buscar soluciones que mitiguen el bajo nivel de vida del campesino, dadas las precarias condiciones de muchos de los actuales ecosistemas, que no permiten implementar los modelos tradicionales de explotación desmesurada de los recursos. El cactus nopal  (Opuntia ficus-indica ofrece ventajas en la producción animal, presentándose como una alternativa agroecológica, fácil de implementar en zonas semiáridas bajo condiciones adversas y con un mínimo de insumosagropecuarios. El  objetivo de este estudio fue evaluar el desempeño nutricional del cactus nopal bajo cuatro tipos de fertilización, mediante el análisis proximal de alimentos, implementado en el laboratorio de nutrición animal de la Universidad Pedagógica y Tecnológica de Colombia, UPTC sede Tunja, en los especímenes de cactus nopal existentes en el jardín botánico de la misma. Se utilizaron cuatro tipos de tratamientos para la fertilización: 1.Químico, 2.Orgánico, 3. Químico + Orgánico y 4.Testigo, aplicados en intervalos de veinte (20 días, por tres veces, aplicando también agua en un riego semanal; tiempo al cabo del cual se realizó la valoraciónnutricional, en donde el Tratamiento 2 (Orgánico fue el de mejor desempeño, seguido por el Tratamiento 3, luego el tratamiento 1 y, por último, el tratamiento 4 (testigo.

  18. Reflexiones sobre los sentimientos y las percepciones de las madres de recién nacidos con bajo peso

    Directory of Open Access Journals (Sweden)

    Darlene Basílio dos Santos

    2011-12-01

    Full Text Available Introducción: Para la mayoría de las mujeres, el nacimiento de un hijo se configura como un evento único, que refuerza y legitima la condición de ser mujer. Antes de nacer, el bebé es concebido, los padres se preguntan cuál es el sexo, e incluso la apariencia de que la profesión. El primero de los movimientos fetales contribuye al establecimiento de una relación de amor entre madre e hijo, que más tarde constituirán el apego materno filial. Materiales y Métodos: Es un salto cualitativo descriptivo. Según Minayo este tipo de investigación hace hincapié en la adquisición de los datos recogidos de forma descriptiva del contacto directo con la investigadora ha estudiado este fenómeno. "La investigación cualitativa el investigador guía en la comprensión del fenómeno objeto de estudio de la experiencia descrita por estar en el mundo" Resultados: Los resultados permitieron la construcción de tres categorías de análisis, que son: La hospitalización de recién nacidos con bajo peso,las estrategias para hacer frente a la hospitalización del niño en la unidad neonatal de cuidados intensivos, y obtener ayuda de enfermería como un factor facilitador para hacer frente a la hospitalización de recién nacidos con bajo peso. Discusión y Conclusiones: Con este estudio se dieron cuenta de que, al ser una madre recién nacidos con bajo peso Escort no es una condición que termina en sí mismo. Para la mujer-madre, la hospitalización del recién nacido se presenta como algo asombroso e impresionante, ya que ella soñaba con tener un bebé sano, lo que podría llevar a casa, cuidar y ejercer su papel de madre.(Rev Cuid 2011; 2(2: 168-74.Palabras clave: Enfermeria, Neonatología, Recién Nacido, Relaciones Madre-Hijo. (Fuente: DeCs BIREME.

  19. Continued care of uranium mill sites: some economic considerations

    International Nuclear Information System (INIS)

    Harrington, W.; Sawyer, J.W. Jr.

    1978-01-01

    A critique of recently enacted legislation authorizing the New Mexico Environmental Improvement Agency to regulate uranium mills in the state is presented. Under this new legislation, the Agency is authorized to require payment of up to 10 cents per pound of yellowcake from each licensed mill in the state until a total of $1 million has been deposited by that mill. The continued care fund thus created will provide for maintenance in perpetuity of mill sites after being decommissioned. Arguments are presented, based on calculations for a typical 5,000 ton per day mill, that even the maximum amount is not likely to generate sufficient income to support an adequate maintenance program. The matter is further aggravated by the rate of inflation which will increase costs beyond the coverage provided by a fixed funding system. To correct this situation, it is proposed that (1) the fund should generate an income stream sufficient to meet all maintenance costs based on currently available information on costs, interest, and inflation rates, and (2) the terms of the continued care contribution should be readily alterable as new information becomes available. The latter condition should be coupled with removal of the upper statutory limit now established for the fund

  20. Nano-sized crystalline drug production by milling technology.

    Science.gov (United States)

    Moribe, Kunikazu; Ueda, Keisuke; Limwikrant, Waree; Higashi, Kenjirou; Yamamoto, Keiji

    2013-01-01

    Nano-formulation of poorly water-soluble drugs has been developed to enhance drug dissolution. In this review, we introduce nano-milling technology described in recently published papers. Factors affecting the size of drug crystals are compared based on the preparation methods and drug and excipient types. A top-down approach using the comminution process is a method conventionally used to prepare crystalline drug nanoparticles. Wet milling using media is well studied and several wet-milled drug formulations are now on the market. Several trials on drug nanosuspension preparation using different apparatuses, materials, and conditions have been reported. Wet milling using a high-pressure homogenizer is another alternative to preparing production-scale drug nanosuspensions. Dry milling is a simple method of preparing a solid-state drug nano-formulation. The effect of size on the dissolution of a drug from nanoparticles is an area of fundamental research, but it is sometimes incorrectly evaluated. Here, we discuss evaluation procedures and the associated problems. Lastly, the importance of quality control, process optimization, and physicochemical characterization are briefly discussed.

  1. Current practices and options for confinement of uranium mill tailings

    International Nuclear Information System (INIS)

    1981-01-01

    At the United Nations Conference on the Human Environment, which took place in Stockholm from 4 to 6 June 1972, national governments were asked to explore, with the International Atomic Energy Agency and other appropriate international organizations, international co-operation on radioactive waste matters including those of mining and tailings disposal. Since that time the IAEA has been active in the field of uranium and thorium mill tailings management. As part of this activity, the present report describes current practices and options for confinement of uranium mill tailings. It is addressed to technical and administrative personnel who are involved in planning and implementing national and industrial programmes on the management of such tailings. In 1974 and 1975 the IAEA convened meetings of experts to review matters of interest and importance in the management of uranium and thorium mine and mill tailings. These activities led to the publication in 1976 of Management of Wastes from the Mining and Milling of Uranium and Thorium Ores, a Code of Practice and Guide to the Code, IAEA Safety Series No. 44. As a continuation of this activity, the IAEA is here dealing more specifically with the design and siting considerations for the management of uranium mill tailings

  2. Preparation of tungsten-iron carbide by ball milling

    International Nuclear Information System (INIS)

    Wang, G.M.; Campbell, S.J.; Calka, A.; Kaczmarek, W.A.

    1996-01-01

    Several sets of elemental powder mixtures of Fe-W-C (W 46 Fe 46 C 8 , W 60 Fe 20 C 20 and W 34 Fe 33 C 33 ) were ball milled using Uni-Ball mill for periods of up to 550 h in vacuum with a ball - to - powder ratio of about 35:1. Depending on the milling time, the main component of the as-milled materials was found to be solid solutions of Fe-W-C or Fe-C. Ternary phase W 3 Fe 3 C was obtained on annealing the as-milled materials at about 700 deg C. This product was then found to transfer to (FeW) 6 C on heat treatment at about 800 deg C. The resultant products of the annealing processes were found to depend not only on the annealing temperature, but also the starting composition, especially the initial carbon concentration. Detailed information on the structural and phase evolution during thermal treatment as measured using x-ray diffraction, Moessbauer spectroscopy and thermal analysis is presented. Special interest is focused on the competition for formation in this system between the Fe-C, W-Fe and W-C phases

  3. Uranium ore mill at Dolni Rozinka: 40 years of operation

    International Nuclear Information System (INIS)

    Toman, F.; Jezova, V.

    2007-01-01

    Uranium ore mined in the Rozna deposit is treated at a chemical treatment plant (a mill) situated in the close vicinity of the Rozna mine. In the mill, uranium is extracted from the crushed and ground-up ore by alkaline leaching. Uranium is then recovered from the solution by sorption on ion exchange resin; the next steps are precipitation and drying. Alkaline leaching is applied at the atmospheric pressure and the temperature of 80 deg C; the recovery factor is moving around 93%. The final product of the milling is uranium concentrate, ammonium diuranate (NH 4 ) 2 U 2 O 7 ), a so-called 'yellow cake' which is treated into a fuel for nuclear power plants in conversion facilities abroad. The milling is carried on under the condition of the closed cycle of technology water. Due to the positive annual precipitation balance, the over balance of technology water in tailings pond has to be purified before discharging into a river. Evaporation and membrane processes (electrodialysis and reverse osmosis) are used to purify the water. The mill at Dolni Rozinka has been in operation since 1968. It has processed 13.2 million tons of uranium ore which is about 14000 tons of uranium and purified more than 6 million m 3 of the over balanced technology water during 40 years. From the organizational point of view, the mine and the chemical treatment plant form the branch plant GEAM, which is a part of the state enterprise DIAMO. (author)

  4. Chest radiological findings in pakistani cement mill workers

    International Nuclear Information System (INIS)

    Meo, Sultan A.

    2003-01-01

    Chest radiological findings in Pakistani cement mill workers Even in the 21st century, in developing countries millions of people work daily in dusty environments. They are exposed to different types of health hazards namely, fumes, gases and dust, which are risk factors for developing occupational diseases. Therefore, the aim of this study was to perform chest radiology to determine the occupational hazards of cement dust on the lungs of cement mill workers. This study was carried out in the Department of Physiology, Faculty of Health and Medical Sciences, Hamdard University Karachi, Pakistan, during the period June to August 2000. In this study 50, apparently healthy volunteer male cement mill workers were randomly selected with an average of 13 years exposure with age ranging from 20-60 years. They were matched with 50, healthy male control subjects in terms of age, height, weight and socioeconomic status. Both groups met with exclusion criteria as per standard. Radiology was performed by Trophy radiology. Results: The present study demonstrated 12% of cases with interstitial lung disease and 2% of cases with pleural thickening and chronic bronchitis in cement mill workers. Conclusion: Exposure to cement dust causes interstitial lung disease, pleural thickening and chronic bronchitis in cement mill workers. (author)

  5. Structural and magnetic properties of ball milled copper ferrite

    DEFF Research Database (Denmark)

    Goya, G.F.; Rechenberg, H.R.; Jiang, Jianzhong

    1998-01-01

    The structural and magnetic evolution in copper ferrite (CuFe2O4) caused by high-energy ball milling are investigated by x-ray diffraction, Mössbauer spectroscopy, and magnetization measurements. Initially, the milling process reduces the average grain size of CuFe2O4 to about 6 nm and induces....... The canted spin configuration is also suggested by the observed reduction in magnetization of particles in the blocked state. Upon increasing the milling time, nanometer-sized CuFe2O4 particles decompose, forming alpha-Fe2O3 and other phases, causing a further decrease of magnetization. After a milling time...... of 98 h, alpha-Fe2O3 is reduced to Fe3O4, and magnetization increases accordingly to the higher saturation magnetization value of magnetite. Three sequential processes during high-energy ball milling are established: (a) the synthesis of partially inverted CuFe2O4 particles with a noncollinear spin...

  6. Suppressing Heavy Metal Leaching through Ball Milling of Fly Ash

    Directory of Open Access Journals (Sweden)

    Zhiliang Chen

    2016-07-01

    Full Text Available Ball milling is investigated as a method of reducing the leaching concentration (often termed stablilization of heavy metals in municipal solid waste incineration (MSWI fly ash. Three heavy metals (Cu, Cr, Pb loose much of their solubility in leachate by treating fly ash in a planetary ball mill, in which collisions between balls and fly ash drive various physical processes, as well as chemical reactions. The efficiency of stabilization is evaluated by analysing heavy metals in the leachable fraction from treated fly ash. Ball milling reduces the leaching concentration of Cu, Cr, and Pb, and water washing effectively promotes stabilization efficiency by removing soluble salts. Size distribution and morphology of particles were analysed by laser particle diameter analysis and scanning electron microscopy. X-ray diffraction analysis reveals significant reduction of the crystallinity of fly ash by milling. Fly ash particles can be activated through this ball milling, leading to a significant decrease in particle size, a rise in its BET-surface, and turning basic crystals therein into amorphous structures. The dissolution rate of acid buffering materials present in activated particles is enhanced, resulting in a rising pH value of the leachate, reducing the leaching out of some heavy metals.

  7. Effect of milling on DSC thermogram of excipient adipic acid.

    Science.gov (United States)

    Ng, Wai Kiong; Kwek, Jin Wang; Yuen, Aaron; Tan, Chin Lee; Tan, Reginald

    2010-03-01

    The purpose of this research was to investigate why and how mechanical milling results in an unexpected shift in differential scanning calorimetry (DSC) measured fusion enthalpy (Delta(fus)H) and melting point (T(m)) of adipic acid, a pharmaceutical excipient. Hyper differential scanning calorimetry (hyper-DSC) was used to characterize adipic acid before and after ball-milling. An experimental study was conducted to evaluate previous postulations such as electrostatic charging using the Faraday cage method, crystallinity loss using powder X-ray diffraction (PXRD), thermal annealing using DSC, impurities removal using thermal gravimetric analysis (TGA) and Karl Fischer titration. DSC thermograms showed that after milling, the values of Delta(fus)H and T(m) were increased by approximately 9% and 5 K, respectively. Previous suggestions of increased electrostatic attraction, change in particle size distribution, and thermal annealing during measurements did not explain the differences. Instead, theoretical analysis and experimental findings suggested that the residual solvent (water) plays a key role. Water entrapped as inclusions inside adipic acid during solution crystallization was partially evaporated by localized heating at the cleaved surfaces during milling. The correlation between the removal of water and melting properties measured was shown via drying and crystallization experiments. These findings show that milling can reduce residual solvent content and causes a shift in DSC results.

  8. Estrés Materno y Configuración Familiar: Estudio comparativo en Familias Chilenas Monoparentales y Nucleares de bajos ingresos

    OpenAIRE

    Olhaberry, Marcia; Pontificia Universidad Católica de Chile; Farkas, Chamarrita

    2012-01-01

    Los estudios sobre estrés materno durante la crianza infantil han considerado variables contextuales para explicarlo. El nivel socioeconómico, así como la configuración familiar han sido variables relevantes, asociándose monoparentalidad en familias de bajos ingresos a mayores niveles de estrés materno. Se estudian los niveles de estrés materno en familias chilenas nucleares y monoparentales de N.S.E. bajo, considerando el estrés en distintas dimensiones, asociado al rol materno, a la interac...

  9. Producción de hortalizas bajo invernaderos (fitotoldos), en la mejora de la alimentación familiar en zonas Altoandinas, Melgar, Puno Perú

    OpenAIRE

    Morocco Pilco,Natali Beatriz

    2015-01-01

    El trabajo se desarrolló en los distritos de Umachiri, Cupi y Macari, provincia de Melgar, Región Puno, Perú, sobre los 3900 m.s.n.m.; con el objetivo de determinar los beneficios de la producción de hortalizas bajo invernaderos (fitotoldos) en la alimentación familiar. Se seleccionaron 25 familias para realizar las determinaciones en campo. La producción de hortalizas bajo invernadero (fitotoldos) en zonas alto andinas, permite generar disponibilidad y acesso a alimentos diversificados y nut...

  10. DEVELOPMENT OF A METHOD OF IMPROVEMENT OF QUALITY OF MILL PRODUCTS AND WEAR RESISTANCE OF THE TOOL AT THE ROLLING MILL 150 JSC «BSW – MANAGING COMPANY OF HOLDING «BMC»

    Directory of Open Access Journals (Sweden)

    I. A. Zuyeu

    2016-01-01

    Full Text Available Enhancement of calibration of mill rolls of the rolling mill 150, to improve of the mill products quality characteristics and to increase efficiency of the whole production is described in the article.

  11. Cataluña y el Bajo Ampurdán en la obra de Juan Carandell Pericay

    OpenAIRE

    Naranjo-Ramírez, J.; López Ontiveros, Antonio

    2007-01-01

    En el contexto de un estudio general y completo de la obra del geólogo y geógrafo Juan Carandell, se aporta una aproximación al papel que Cataluña –y más concretamente el Bajo Ampurdán-, su geografía y sus gentes juegan en la vida y en la obra de nuestro autor. Con una mirada amplia y generalizadora se recuerdan las aportaciones y trabajos dedicados a estas tierras bajoampurdanesas, acerca de las cuales se hace un resumen y una valoración científica. Todo ello permite a su vez detectar la alt...

  12. Proyecto Turístico de Cabañas de Bajo Impacto Ambiental en la Paz Km70

    OpenAIRE

    Quito, Natali

    2015-01-01

    El método que servirá de base para la realización del presente proyecto turístico de “Cabañas de Bajo Impacto Ambiental en la Paz Km70”, es el inductivo, por cuanto se efectuará los análisis de los temas mencionados en el esquema de contenidos, también me apoyaré en la investigación exploratoria de campo debido a que se deben realizar visitas al lugar, ayudándome en las técnicas de investigación como son: observación, entrevistas, grupos focales, así también se empleará la investigación bibli...

  13. Fotogrametría de bajo coste para la modelización de edificios históricos

    Directory of Open Access Journals (Sweden)

    José Luis Pérez García

    2011-04-01

    Full Text Available En los últimos tiempos las metodologías y herramientas utilizadas para el estudio y la documentación del patrimonio histórico han sufrido un importante avance al disponer de un mayor abanico de posibilidades para abordar estas tareas. Sin embargo, algunas de estas nuevas posibilidades, tales como las estaciones fotogramétricas digitales o el sistema láser escáner, si bien facilitan y mejoran de manera importante los trabajos y productos obtenidos, tienen un coste bastante elevado, que en muchos casos no permiten su utilización. En este trabajo se presentan diferentes técnicas fotogramétricas de bajo coste, que permiten obtener productos con precisiones aceptables y muy interesantes para el estudio, la documentación y modelización de documentos históricos.

  14. Milling technological experiments to reduce Fusarium toxin contamination in wheat

    Directory of Open Access Journals (Sweden)

    Véha A.

    2015-01-01

    Full Text Available We examine 4 different DON-toxin-containing (0.74 - 1.15 - 1.19 - 2.14 mg/kg winter wheat samples: they were debranned and undebranned, and we investigated the flour’s and the by-products’ (coarse, fine bran toxin content changes. SATAKE lab-debranner was used for debranning and BRABENDER lab-mill for the milling process. Without debranning, two sample flours were above the DON toxin limit (0.75 mg/kg, which are waste. By minimum debranning (and minimum debranning mass loss; 6-8%, our experience with whole flour is that the multi-stage debranning measurement significantly reduces the content of the flour’s DON toxin, while the milling by-products, only after careful consideration and DON toxin measurements, may be produced for public consumption and for feeding.

  15. Uranium mill decommissioning - an update on the Edgemont experience

    International Nuclear Information System (INIS)

    Donovan, Th.K.; Chart, E.J.; Cummings, G.W.; Tappan, J.T.

    1983-01-01

    This paper describes the Edgemont Uranium Mill Decommissioning Project. An estimated 5.4 million tons of contaminated material including approximately 2.5 million tons of uranium mill tailings will be moved to a disposal site approved by the Nuclear Regulatory Commission (NRC). The decommissioning activities will be carried out by Silver King Mines, Inc., under a management services contract to the Tennessee Valley Authority. The primary advantages of the disposal site chosen are the short distance from the existing site and the approximately 650 feet of relatively dense impermeable shales above the shallowest known aquifer. Three large ore stockpiles containing about 100,000 pounds of uranium have been moved from the mill site to a proposed mine site. The decommissioning project will be carried out by using the existing labor force to the maximum extent possible thus preventing a population influx and the accompanying socioeconomic input to the city of Edgemont, SD

  16. The Role of Promotion in Milling and Bakery Products Sales

    Directory of Open Access Journals (Sweden)

    Sergiu-Bogdan Constantin

    2009-07-01

    Full Text Available Irrespective of the avenue chosen for the retail of milling and bakery products, a key role in sales growth is the one played by promotion, information of the future customers as to the characteristics of the products, the execution and sale conditions. Such information process takes place by means of the promotional mix, consisting of a blend of advertising, sales promotion, public relations tools, trademarks, promotional events, and sales forces. The milling and baking industry uses, to certain extent, all the components of the promotional mix. Product promotion is central both to sales growth, as well as to educating, advising and informing consumers as to how they can select quality milling and bakery products.

  17. NUMERICAL EVALUATION OF TEMPERATURE DISTRIBUTION IN THE ROLLING MILL ROLLS

    Directory of Open Access Journals (Sweden)

    José Claudino de Lira Júnior

    2013-06-01

    Full Text Available In hot rolling processes occur changes in the profile of the rolling mill rolls (expansion and contraction and constant wear due to mechanical stress and continuous thermal cycles of heating/cooling caused by contact rolled material- working roll and the cooling system by water jets in their surface, decreasing their lifetime. This paper presents a computational model to simulate the thermal performance of rolling mill rolls. The model was developed using the finite volume method for a transient two-dimensional system and allows calculating the temperature distribution of the rolling mill rolls under various conditions of service. Here it is investigated the influence of flow rate and temperature of the cooling water on the temperature distribution. The results show that the water temperature has greater influence than the water flow to control the surface temperature of the cylinders.

  18. Grain dust and respiratory health in South African milling workers.

    Science.gov (United States)

    Bachmann, M; Myers, J E

    1991-01-01

    Respiratory health was investigated in 224 grain milling workers. The likelihood of respiratory symptoms and chronic airflow limitation was raised for workers exposed to dust independent of the effects of smoking. Smokers were more likely than non-smokers to respond to a bronchodilator at the end of the working week. Dust was more strongly associated with most abnormal outcomes than was smoking. Subjective categories of exposure to dust were more strongly associated with most abnormal outcomes than were objective categories. The prevalence of all symptoms at the time of a survey conducted at the mill six years before was higher in workers who subsequently left the mill than in those who remained employed although the differences were not significant. PMID:1931723

  19. Source terms for airborne radioactivity arising from uranium mill wastes

    International Nuclear Information System (INIS)

    O'Riordan, M.C.; Downing, A.L.

    1978-01-01

    One of the problems in assessing the radiological impact of uranium milling is to determine the rates of release to the air of material from the various sources of radioactivity. Such source terms are required for modelling the transport of radioactive material in the atmosphere. Activity arises from various point and area sources in the mill itself and from the mill tailings. The state of the tailings changes in time from slurry to solid. A layer of water may be maintained over the solids during the life of the mine, and the tailings may be covered with inert material on abandonment. Releases may be both gaseous and particulate. This paper indicates ways in which radon emanation and the suspension of long-lived particulate activity might be quantified, and areas requiring further exploration are identified

  20. Stress and accidental defect detection on rolling mill rolls

    International Nuclear Information System (INIS)

    Auzas, J.-D.

    1999-01-01

    During the rolling mill process, rolls are submitted to high pressures that can lead to local decohesion or metallurgical changes. Both these cracks or softened areas must be detected as soon as they appear because of the risk of spalling, marks on the product, and mill wreck. These defects can be detected using the eddy current method, and particularly sensors specially developed for micro-defects detection. These sensors must be adapted to the environment of a roll grinding machine on which they must be installed. Users' schedule of conditions also require them to be attached to a wide range of eddy current generator and automatic computerized interpretation. Mill requirements for new high tech roll grades and quality lead to continuous development and improvement of the tools that will provide immediate 'go - no go' information. This paper is an update of these developments. (author)