WorldWideScience

Sample records for scrubber case study

  1. Theoretical study of liquid droplet dispersion in a venturi scrubber.

    Science.gov (United States)

    Fathikalajahi, J; Talaie, M R; Taheri, M

    1995-03-01

    The droplet concentration distribution in an atomizing scrubber was calculated based on droplet eddy diffusion by a three-dimensional dispersion model. This model is also capable of predicting the liquid flowing on the wall. The theoretical distribution of droplet concentration agrees well with experimental data given by Viswanathan et al. for droplet concentration distribution in a venturi-type scrubber. The results obtained by the model show a non-uniform distribution of drops over the cross section of the scrubber, as noted by the experimental data. While the maximum of droplet concentration distribution may depend on many operating parameters of the scrubber, the results of this study show that the highest uniformity of drop distribution will be reached when penetration length is approximately equal to one-fourth of the depth of the scrubber. The results of this study can be applied to evaluate the removal efficiency of a venturi scrubber.

  2. Supporting Calculations For Submerged Bed Scrubber Condensate Disposal Preconceptual Study

    International Nuclear Information System (INIS)

    Pajunen, A. J.; Tedeschi, A. R.

    2012-01-01

    This document provides supporting calculations for the preparation of the Submerged Bed Scrubber Condensate Disposal Preconceptual Study report. The supporting calculations include equipment sizing, Hazard Category determination, and LAW Melter Decontamination Factor Adjustments

  3. Supporting Calculations For Submerged Bed Scrubber Condensate Disposal Preconceptual Study

    Energy Technology Data Exchange (ETDEWEB)

    Pajunen, A. J.; Tedeschi, A. R.

    2012-09-18

    This document provides supporting calculations for the preparation of the Submerged Bed Scrubber Condensate Disposal Preconceptual Study report The supporting calculations include equipment sizing, Hazard Category determination, and LAW Melter Decontamination Factor Adjustments.

  4. Numerical Study on Shape of Liquid Inlet for Venturi Scrubber in Self-Priming Mode

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. W.; Kim, H. S.; Kim, W. S. [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    In this study, the simulation was developed for different design of liquid inlet to improve injection in submerged self-priming mode venturi scrubber. 1. A hole type is easy to discharged gas from liquid inlet for submerged self-priming mode. 2. A spit type, the liquid is injected into venturi scrubber for all gas volume rate in submerged self-priming mode. 3. A spit type is better than a hole type on improving injection of liquid inlet for submerged self-priming mode in venturi scrubber.The gas accelerate in convergent segment and reach maximum velocity at throat. The liquid is injected into venturi scrubber depends on static pressure difference between outside and inside of the venturi throat, then liquid is atomized into fine droplet when it contacts with high speed airflow. Aerosol removal occur in the diverging section as the inlet gas stream mixes with the fog of tiny liquid droplets. Many studies dealing with the non-submerged selfpriming venturi scrubber. In a non-submerged condition, outlet nozzle of venturi scrubber is not immersed in water pool of a tank whereas in a submerged condition, the outlet of a venturi scrubber is immersed in water pool. The scrubbing liquid is supplied by water reservoir surrounding the throat and is drawn in due to a pressure difference between the outside and the inside of the venturi throat that arises out of the hydrostatic pressure of the liquid and static pressure of the flowing gas. The performance of a venturi scrubber is improved with high gas velocities and high liquid flow rate. Therefore, it is important to study the liquid fraction in venturi scrubber operated at different condition. The venturi scrubber is used to a submerged self-priming mode because the system operates in a passive mode in CFVS. The present study focuses on the liquid flow characteristics for various shapes of liquid inlet in submerged self-priming venturi scrubber.

  5. Numerical Study on Shape of Liquid Inlet for Venturi Scrubber in Self-Priming Mode

    International Nuclear Information System (INIS)

    Lee, J. W.; Kim, H. S.; Kim, W. S.

    2016-01-01

    In this study, the simulation was developed for different design of liquid inlet to improve injection in submerged self-priming mode venturi scrubber. 1. A hole type is easy to discharged gas from liquid inlet for submerged self-priming mode. 2. A spit type, the liquid is injected into venturi scrubber for all gas volume rate in submerged self-priming mode. 3. A spit type is better than a hole type on improving injection of liquid inlet for submerged self-priming mode in venturi scrubber.The gas accelerate in convergent segment and reach maximum velocity at throat. The liquid is injected into venturi scrubber depends on static pressure difference between outside and inside of the venturi throat, then liquid is atomized into fine droplet when it contacts with high speed airflow. Aerosol removal occur in the diverging section as the inlet gas stream mixes with the fog of tiny liquid droplets. Many studies dealing with the non-submerged selfpriming venturi scrubber. In a non-submerged condition, outlet nozzle of venturi scrubber is not immersed in water pool of a tank whereas in a submerged condition, the outlet of a venturi scrubber is immersed in water pool. The scrubbing liquid is supplied by water reservoir surrounding the throat and is drawn in due to a pressure difference between the outside and the inside of the venturi throat that arises out of the hydrostatic pressure of the liquid and static pressure of the flowing gas. The performance of a venturi scrubber is improved with high gas velocities and high liquid flow rate. Therefore, it is important to study the liquid fraction in venturi scrubber operated at different condition. The venturi scrubber is used to a submerged self-priming mode because the system operates in a passive mode in CFVS. The present study focuses on the liquid flow characteristics for various shapes of liquid inlet in submerged self-priming venturi scrubber.

  6. Experimental study of iodine removal efficiency in self-priming venturi scrubber

    International Nuclear Information System (INIS)

    Gulhane, N.P.; Landge, A.D.; Shukla, D.S.; Kale, S.S.

    2015-01-01

    Highlights: • Fabrication, erection of experimental set up and carrying out experimentation with self priming venturi scrubber. • Predicting solubility of iodine in water and its pH dependency. • Increasing pH of water increases iodine removal efficiency. • Maximum iodine removal efficiency is obtained at 10 pH of water using sodium thiosulphate. - Abstract: The objective of present experimental study is to examine the iodine removal efficiency of a self-priming venturi scrubber for submerged operating condition. The venturi scrubber is used in Containment Filtered Venting System of nuclear power plants to remove the gaseous pollutants from contaminated gas during severe accidents. The experiment consists of mixing the iodine vapours with the air using suction venturi and pressure cooker system. The purpose of iodine mixing with air is to examine scrubbing performance of the designed venturi scrubber with water as scrubbing liquid. The performance parameters of venturi scrubber are expressed mainly in terms of pressure drop and iodine removal efficiency. The iodine removal efficiency of venturi scrubber is estimated for a series of two experiments by measuring the quantity of iodine in water from iodometric titration with four distinct pH of water. It has been experimentally observed that iodine removal efficiency is improved by using higher pH value of scrubbing liquid since solubility of iodine gets improved at higher pH

  7. Experimental study of pressure drop characteristics of venturi scrubber working at self-priming mode

    International Nuclear Information System (INIS)

    Wang Meng; Sun Zhongning; Gu Haifeng; Guo Xueqing; Yu Yong

    2012-01-01

    The pressure drop characteristics of Venturi scrubber working at self-priming mode were studied experimentally. The test sections were smooth glass scrubbers, with air and water as the working medium. The results show that the trends of empirical formula are more consistent with that of the experimental results, but the relative error is large, up to ±50% or more. The experimental correlation is proposed based on the experimental research, and the calculated results of which can well predict the experimental data and the relative error is within ±15%. (authors)

  8. Pilot-scale field study for ammonia removal from lagoon biogas using an acid wet scrubber.

    Science.gov (United States)

    Lin, Hongjian; Wu, Xiao; Miller, Curtis; Zhu, Jun; Hadlocon, Lara Jane; Manuzon, Roderick; Zhao, Lingying

    2014-01-01

    The anaerobic activities in swine slurry storage and treatment generate biogas containing gaseous ammonia component which is a chemical agent that can cause adverse environmental impacts when released to the atmosphere. The aim of this pilot plant study was to remove ammonia from biogas generated in a covered lagoon, using a sulfuric acid wet scrubber. The data showed that, on average, the biogas contained 43.7 ppm of ammonia and its concentration was found to be exponentially related to the air temperature inside the lagoon. When the air temperature rose to 35°C and the biogas ammonia concentration reached 90 ppm, the mass transfer of ammonia/ammonium from the deeper liquid body to the interface between the air and liquid became a limiting factor. The biogas velocity was critical in affecting ammonia removal efficiency of the wet scrubber. A biogas flow velocity of 8 to 12 mm s(-1) was recommended to achieve a removal efficiency of greater than 60%. Stepwise regression revealed that the biogas velocity and air temperature, not the inlet ammonia concentration in biogas, affected the ammonia removal efficiency. Overall, when 73 g L(-1) (or 0.75 M) sulfuric acid solution was used as the scrubber solution, removal efficiencies varied from 0% to 100% with an average of 55% over a 40-d measurement period. Mass balance calculation based on ammonium-nitrogen concentration in final scrubber liquid showed that about 21.3 g of ammonia was collected from a total volume of 1169 m(3) of biogas, while the scrubber solution should still maintain its ammonia absorbing ability until its concentration reaches up to 1 M. These results showed promising use of sulfuric acid wet scrubber for ammonia removal in the digester biogas.

  9. Study of iodine removal efficiency in self-priming venturi scrubber

    International Nuclear Information System (INIS)

    Ali, Majid; Yan, Changqi; Sun, Zhongning; Gu, Haifeng; Wang, Junlong

    2013-01-01

    Highlights: ► Study of iodine removal efficiency in a self-priming venturi scrubber. ► Investigation of iodine removal efficiency at different gas and liquid flow rates. ► Investigation of different inlet concentrations of iodine. ► Mathematical model based on mass transfer. - Abstract: Venturi scrubber is used in filtered vented containment system of nuclear power plants to remove the gaseous pollutants from contaminated gas during severe accidents. In this research, an experimental and theoretical investigation has been carried out to study the iodine removal efficiency in a self-priming venturi scrubber. The aqueous solution is prepared by adding weight percentage of sodium hydroxide 0.5% and sodium thiosulphate 0.2% in scrubbing water to increase the absorbance of inorganic iodine (I 2 ) from the contaminated gas during emission. The iodine removal efficiency is investigated at various gas and liquid flow rates, and iodine inlet concentrations. The iodine removal efficiency is measured experimentally by measuring the inlet and outlet concentration of iodine at sampling ports. The petite droplets are formed in a venturi scrubber to absorb the iodine through the mass transfer phenomenon. A mathematical model for mass transfer based on a gas liquid interface is employed for the verification of experimental results. The contact time between iodine and scrubbing solution depends on the total volumetric flow of gas and liquid, and volume of throat and diffuser of the venturi scrubber. Sauter mean diameter is calculated from the Nukiyama and Tanasawa correlation. Steinberger and Treybal’s correlation is used to measure the mass transfer coefficient for the gas phase. The results calculated from the model under predict the experimental data

  10. Aerosol scrubbers

    International Nuclear Information System (INIS)

    Sheely, W.F.

    1986-01-01

    The Submerged Gravel Scrubber is an air cleaning system developed by the Department of Energy's Liquid Metal Reactor Program. The Scrubber System has been patented by the Department of Energy. This technology is being transferred to industry by the DOE. Its basic principles can be adapted for individual applications and the commercialized version can be used to perform a variety of tasks. The gas to be cleaned is percolated through a continuously washed gravel bed. The passage of the gas through the gravel breaks the stream into many small bubbles rising in a turbulent body of water. These conditions allow very highly efficient removal of aerosols from the gas

  11. FEASIBILITY STUDY OF GAS TREATMENT PLANT BASED ON AN EJECTOR SCRUBBER

    Directory of Open Access Journals (Sweden)

    S. Iu. Panov

    2014-01-01

    Full Text Available Summary. The article executed the feasibility study of various options for gas treatment. Rapid development of industry and transport worldwide in recent times raises the problem in the protection of habitat environment from harmful waste. In solving problems of flue gas treatment great attention is given to the economic characteristics and recycling techniques for capturing emissions and disposal must also meet the sanitary health requirements: flue gas treatment plants should not cause air or water pollution. The set objective is solved by developing a two-stage wet treatment system for pyrolysis gas based on ejector scrubbers. Their advantage - a central nozzle supply that allows the scrubber to operate on the principle of an ejector pump. Projected plant can be used in enterprises for processing of solid domestic and industrial waste, where there are steam and hot water boilers, whose operations result in contaminated gases emissions obtained with high temperatures. In particular, this installation can be applied at a cement plant in which a large amount of waste gases containing sulfur oxides is emitted. Assessment of market potential for the plant designed to treat waste gases in the cement factory is performed through a SWOT analysis. SWOT analysis results indicate the possibility of the treatment of exhaust gases without a high cost and with high gas treatment efficiency. Plant competitive analysis was done using an expert method in comparison with market competitors. Technical and economic indicators of the plant are presented. Return on investments is 46% and payback period of capital investments - 2.7 years.

  12. Acid in perchloroethylene scrubber solutions used in HTGR fuel preparation processes. Analytical chemistry studies

    International Nuclear Information System (INIS)

    Lee, D.A.

    1979-02-01

    Acids and corrosion products in used perchloroethylene scrubber solutions collected from HTGR fuel preparation processes have been analyzed by several analytical methods to determine the source and possible remedy of the corrosion caused by these solutions. Hydrochloric acid was found to be concentrated on the carbon particles suspended in perchloroethylene. Filtration of carbon from the scrubber solutions removed the acid corrosion source in the process equipment. Corrosion products chemisorbed on the carbon particles were identified. Filtered perchloroethylene from used scrubber solutions contained practically no acid. It is recommended that carbon particles be separated from the scrubber solutions immediately after the scrubbing process to remove the source of acid and that an inhibitor be used to prevent the hydrolysis of perchloroethylene and the formation of acids

  13. Study of elemental mercury re-emission through a lab-scale simulated scrubber

    Energy Technology Data Exchange (ETDEWEB)

    Cheng-Li Wu; Yan Cao; Cheng-Chun He; Zhong-Bing Dong; Wei-Ping Pan [Western Kentucky University, KY (United States). Institute for Combustion Science and Environmental Technology

    2010-08-15

    This paper describes a lab-scale simulated scrubber that was designed and built in the laboratory at Western Kentucky University's Institute for Combustion Science and Environmental Technology. A series of tests on slurries of CaO, CaSO{sub 3}, CaSO{sub 4}/CaSO{sub 3} and Na{sub 2}SO{sub 3} were carried out to simulate recirculating slurries in different oxidation modes. Elemental mercury (Hg{sup 0}) re-emission was replicated through the simulated scrubber. The relationship between the oxidation-reduction potential (ORP) of the slurries and the Hg0 re-emissions was evaluated. Elemental mercury re-emission occurred when Hg{sup 2+} that was absorbed in the simulated scrubber was converted to Hg{sup 0}; then, Hg{sup 0} was emitted from the slurry together with the carrier gas. The effects of both the reagents and the operational conditions (including the temperature, pH, and oxygen concentrations in the carrier gas) on the Hg{sup 0} re-emission rates in the simulated scrubber were investigated. The results indicated that as the operational temperature of the scrubber and the pH value of the slurry increased, the Hg{sup 0} concentrations that were emitted from the simulated scrubber increased. The Hg{sup 0} re-emission rates decreased as the O{sub 2} concentration in the carrier gas increased. In addition, the effects of additives to suppress Hg{sup 0} re-emission were evaluated in this paper. Sodium tetrasulfide, TMT 15, NaHS and HI were added to the slurry, while Hg{sup 2+}, which was absorbed in the slurry, was retained in the slurry as mercury precipitates. Therefore, there was a significant capacity for the additives to suppress Hg{sup 0} re-emission. 11 refs., 11 figs., 5 tabs.

  14. Investigation of dust particle removal efficiency of self-priming venturi scrubber using computational fluid dynamics

    Directory of Open Access Journals (Sweden)

    Sarim Ahmed

    2018-06-01

    Full Text Available A venturi scrubber is an important element of Filtered Containment Venting System (FCVS for the removal of aerosols in contaminated air. The present work involves computational fluid dynamics (CFD study of dust particle removal efficiency of a venturi scrubber operating in self-priming mode using ANSYS CFX. Titanium oxide (TiO2 particles having sizes of 1 micron have been taken as dust particles. CFD methodology to simulate the venturi scrubber has been first developed. The cascade atomization and breakup (CAB model has been used to predict deformation of water droplets, whereas the Eulerian–Lagrangian approach has been used to handle multiphase flow involving air, dust, and water. The developed methodology has been applied to simulate venturi scrubber geometry taken from the literature. Dust particle removal efficiency has been calculated for forced feed operation of venturi scrubber and found to be in good agreement with the results available in the literature. In the second part, venturi scrubber along with a tank has been modeled in CFX, and transient simulations have been performed to study self-priming phenomenon. Self-priming has been observed by plotting the velocity vector fields of water. Suction of water in the venturi scrubber occurred due to the difference between static pressure in the venturi scrubber and the hydrostatic pressure of water inside the tank. Dust particle removal efficiency has been calculated for inlet air velocities of 1 m/s and 3 m/s. It has been observed that removal efficiency is higher in case of higher inlet air velocity. Keywords: Computational Fluid Dynamics, Dust Particles, Filtered Containment Venting System, Self-priming Venturi Scrubber, Venturi Scrubber

  15. IODINE REMOVAL EFFICIENCY IN NON-SUBMERGED AND SUBMERGED SELF-PRIMING VENTURI SCRUBBER

    Directory of Open Access Journals (Sweden)

    MAJID ALI

    2013-04-01

    Full Text Available The objective of this conducted research is to study the iodine removal efficiency in a self-priming venturi scrubber for submerged and non-submerged operating conditions experimentally and theoretically. The alkaline solution is used as an absorbent, which is prepared by dissolving sodium hydroxide (NaOH and sodium thiosulphate (Na2S2O3 in water to remove the gaseous iodine (I2 from the gas. Iodine removal efficiency is examined at various gas flow rates and inlet concentrations of iodine for submerged and non-submerged operating conditions. In the non-submerged venturi scrubber, only the droplets take part in iodine removal efficiency. However, in a submerged venturi scrubber condition, the iodine gas is absorbed from gas to droplets inside the venturi scrubber and from bubbles to surrounding liquid at the outlet of a venturi scrubber. Experimentally, it is observed that the iodine removal efficiency is greater in the submerged venturi scrubber as compare to a non-submerged venturi scrubber condition. The highest iodine removal efficiency of 0.99±0.001 has been achieved in a submerged self-priming venturi scrubber condition. A mathematical correlation is used to predict the theoretical iodine removal efficiency in submerged and non-submerged conditions, and it is compared against the experimental results. The Wilkinson et al. correlation is used to predict the bubble diameter theoretically whereas the Nukiyama and Tanasawa correlation is used for droplet diameter. The mass transfer coefficient for the gas phase is calculated from the Steinberger and Treybal correlation. The calculated results for a submerged venturi scrubber agree well with experimental results but underpredicts in the case of the non-submerged venturi scrubber.

  16. Iodine Removal Efficiency in Non-Submerged and Submerged Self-Priming Venturi Scrubber

    Energy Technology Data Exchange (ETDEWEB)

    Ali, Majid; Yan, Changqi; Sun, Zhongning; Gu, Haifeng; Wang, Junlong; Mehboob; Khurram [Harbin Engineering Univ., Harbin (China)

    2013-04-15

    The objective of this conducted research is to study the iodine removal efficiency in a self-priming venturi scrubber for submerged and non-submerged operating conditions experimentally and theoretically. The alkaline solution is used as an absorbent, which is prepared by dissolving sodium hydroxide (NaOH) and sodium thiosulphate (Na{sub 2}S{sub 2}O{sub 3}) in water to remove the gaseous iodine (I{sub 2}) from the gas. Iodine removal efficiency is examined at various gas flow rates and inlet concentrations of iodine for submerged and non-submerged operating conditions. In the non-submerged venturi scrubber, only the droplets take part in iodine removal efficiency. However, in a submerged venturi scrubber condition, the iodine gas is absorbed from gas to droplets inside the venturi scrubber and from bubbles to surrounding liquid at the outlet of a venturi scrubber. Experimentally, it is observed that the iodine removal efficiency is greater in the submerged venturi scrubber as compare to a non-submerged venturi scrubber condition. The highest iodine removal efficiency of 0.99±0.001 has been achieved in a submerged self-priming venturi scrubber condition. A mathematical correlation is used to predict the theoretical iodine removal efficiency in submerged and non-submerged conditions, and it is compared against the experimental results. The Wilkinson et al. correlation is used to predict the bubble diameter theoretically whereas the Nukiyama and Tanasawa correlation is used for droplet diameter. The mass transfer coefficient for the gas phase is calculated from the Steinberger and Treybal correlation. The calculated results for a submerged venturi scrubber agree well with experimental results but underpredicts in the case of the non-submerged venturi scrubber.

  17. Iodine Removal Efficiency in Non-Submerged and Submerged Self-Priming Venturi Scrubber

    International Nuclear Information System (INIS)

    Ali, Majid; Yan, Changqi; Sun, Zhongning; Gu, Haifeng; Wang, Junlong; Mehboob; Khurram

    2013-01-01

    The objective of this conducted research is to study the iodine removal efficiency in a self-priming venturi scrubber for submerged and non-submerged operating conditions experimentally and theoretically. The alkaline solution is used as an absorbent, which is prepared by dissolving sodium hydroxide (NaOH) and sodium thiosulphate (Na 2 S 2 O 3 ) in water to remove the gaseous iodine (I 2 ) from the gas. Iodine removal efficiency is examined at various gas flow rates and inlet concentrations of iodine for submerged and non-submerged operating conditions. In the non-submerged venturi scrubber, only the droplets take part in iodine removal efficiency. However, in a submerged venturi scrubber condition, the iodine gas is absorbed from gas to droplets inside the venturi scrubber and from bubbles to surrounding liquid at the outlet of a venturi scrubber. Experimentally, it is observed that the iodine removal efficiency is greater in the submerged venturi scrubber as compare to a non-submerged venturi scrubber condition. The highest iodine removal efficiency of 0.99±0.001 has been achieved in a submerged self-priming venturi scrubber condition. A mathematical correlation is used to predict the theoretical iodine removal efficiency in submerged and non-submerged conditions, and it is compared against the experimental results. The Wilkinson et al. correlation is used to predict the bubble diameter theoretically whereas the Nukiyama and Tanasawa correlation is used for droplet diameter. The mass transfer coefficient for the gas phase is calculated from the Steinberger and Treybal correlation. The calculated results for a submerged venturi scrubber agree well with experimental results but underpredicts in the case of the non-submerged venturi scrubber

  18. Energy Conservation Alternatives Study (ECAS): Conceptual Design and Implementation Assessment of a Utility Steam Plant with Conventional Furnace and Wet Lime Stack Gas Scrubbers

    Science.gov (United States)

    Brown, Dale H.

    1976-01-01

    A study was performed to estimate the technical/economic characteristics of a steam power plant (3500 pounds per square inch gauge, 1000 degrees Fahrenheit / 1000 degrees Fahrenheit) with a coal-burning radiant furnace and a wet lime stack gas scrubber to control sulfur emissions. Particulate emissions were controlled by an electrostatic precipitator operating at 300 degrees Fahrenheit. The stack gas from the scrubber was reheated from 125 degrees Fahrenheit to 250 degrees Fahrenheit as a base case, and from 125 degrees Fahrenheit to 175 degrees Fahrenheit as an alternate case. The study was performed on a basis consistent with the General Electric ECAS Phase II evaluation of advanced energy conversion systems for electric utility baseload applications using coal or coal-derived fuels. A conceptual design of the power plant was developed, including the on-site calcination of limestone to lime and the provision of sludge ponds to store the products of flue gas scrubbing. From this design, estimates were derived for power plant efficiency, capital cost, environmental intrusion characteristics, natural resource requirements, and cost of electricity at an assumed capacity factor of 65 percent. An implementation assessment was performed where factors affecting applicability of the conceptual design power plant in electric utility generation systems were appraised. At 250 degrees Fahrenheit and 175 degrees Fahrenheit stack gas temperatures respectively, the plants showed a cost of electricity of 39.8 and 37.0 mills per kilowatt-hours and overall plant efficiencies of 32 percent and 34 percent.

  19. Venturi scrubber modelling and optimization

    Energy Technology Data Exchange (ETDEWEB)

    Viswanathan, S [National Univ., La Jolla, CA (United States). School of Engineering and Technology; Ananthanarayanan, N.V. [National Univ. of Singapore (Singapore). Dept. of Chemical and Environmental Engineering; Azzopardi, B.J. [Nottingham Univ., Nottingham (United Kingdom). Dept. of Chemical Engineering

    2005-04-01

    This study presented a method to maintain the efficiency of venturi scrubbers in removing fine particulates during gas clean operations while minimizing pressure drop. Venturi scrubbers meet stringent emission standards. In order to choose the optimal method for predicting pressure drop, 4 established models were compared for their accuracy of prediction and simplicity in application. The enhanced algorithm optimizes Pease-Anthony type venturi scrubber performance by predicting the minimum pressure drop required to achieve the desired collection efficiency. This was accomplished by optimizing the key operating and design parameters such as liquid-to-gas ratio, throat gas velocity, number of nozzles, nozzle diameter and throat aspect ratio. Two of the 4 established models were expanded by providing an empirical algorithm to better predict pressure drop in the venturi throat. Model results were validated with experimental data. The optimization algorithm considers the non-uniformity in liquid distribution. It can be applied to cylindrical and rectangular Pease-Anthony type scrubbers. It offers an effective, systematic and accurate method to optimize the performance of new and existing scrubbers. 54 refs., 5 figs.

  20. Modeling of venturi scrubber efficiency

    Science.gov (United States)

    Crowder, Jerry W.; Noll, Kenneth E.; Davis, Wayne T.

    The parameters affecting venturi scrubber performance have been rationally examined and modifications to the current modeling theory have been developed. The modified model has been validated with available experimental data for a range of throat gas velocities, liquid-to-gas ratios and particle diameters and is used to study the effect of some design parameters on collection efficiency. Most striking among the observations is the prediction of a new design parameter termed the minimum contactor length. Also noted is the prediction of little effect on collection efficiency with increasing liquid-to-gas ratio above about 2ℓ m-3. Indeed, for some cases a decrease in collection efficiency is predicted for liquid rates above this value.

  1. Drop size measurements in Venturi scrubbers

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez Alonso, D.; Azzopardi, B.J. [Nottingham Univ. (United Kingdom). Dept. of Chemical Engineering; Goncalves, J.A.S.; Coury, J.R. [Universidade Federal de Sao Carlos (Brazil). Departamento de Engenharia Quimica

    2001-07-01

    Venturi scrubbers are high efficiency gas cleaners in which suspended particles are removed from gas streams by drops formed by liquid atomisation, usually in the Venturi throat. The size of the drops formed are of fundamental importance to the performance of the equipment, both in terms of pressure drop and dust removal efficiency. In this study, drop sizes in a cylindrical laboratory-scale Venturi scrubber were measured using a laser diffraction technique. Gas velocity and liquid to gas ratios varied from 50 to 90 m/s and 0.5 to 2.0 1/m{sup 3}, respectively. Water was injected using two different arrangements: either as jets in the throat or as a film just upstream of the convergence. Drop size measurements were performed at three positions in the case of jet injection: two located along the throat, and the last one at the end of the diffuser. The present data shows that the Sauter mean diameter of the spray can be well correlated by the equation of Boll et al. (J. Air Pollut. Control Assoc. 24 (1974) 932). Drop size distributions are satisfactorily represented by a Rosin-Rammler function. This paper also provides a simple method for calculating the parameters of the Rosin-Rammler function. As a result of this work, drop sizes in Venturi scrubbers can be estimated with much higher accuracy. (Author)

  2. Droplet size in a rectangular Venturi scrubber

    OpenAIRE

    Costa, M. A. M.; Henrique, P. R.; Gonçalves, J. A. S.; Coury, J.R.

    2004-01-01

    The Venturi scrubber is a device which uses liquid in the form of droplets to efficiently remove fine particulate matter from gaseous streams. Droplet size is of fundamental importance for the scrubber performance. In the present experimental study, a laser diffraction technique was used in order to measure droplet size in situ in a Venturi scrubber with a rectangular cross section. Droplet size distribution was measured as a function of gas velocity (58.3 to 74.9 m/s), liquid-to-gas ratio (0...

  3. Study on the use of oxidant scrubbers for elimination of interferences due to nitrogen dioxide in analysis of atmospheric dimethylsulfide

    Directory of Open Access Journals (Sweden)

    Rodrigues Beatriz A.

    2000-01-01

    Full Text Available In this work, oxidant scrubbers were evaluated for their ability to prevent sampling losses of dimethylsulfide caused by reactions with nitrogen dioxide. Various compounds and mixtures were used in the preparation of the oxidant scrubbers. An automatic flow analysis device was used to compare scrubbing efficiency for nitrogen dioxide. Among the scrubbers tested, the best were shown to be the one made with filter paper or glass wool coated with iron (II sulfate, sulfuric acid and pyrogallic acid, and the one made from with paper coated with triethanolamine. The results obtained under laboratory conditions, using dimethylsulfide standard gas, and in field experiments confirmed that these scrubbers are suitable for the prevention of oxidation during sampling.

  4. Design Aspects of Wet Scrubber System

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyun-Chul; Bang, Young-suk; Jung, Woo-Young; Lee, Doo-Yong [FNC Technology Co. Ltd., Yongin (Korea, Republic of)

    2015-10-15

    The water pool in the wet scrubber system has advantage to cope with decay heat based on the thermal hydraulic balance such as condensation and evaporation inside it. This study focuses on the design aspects of the wet scrubber system to estimate the required water pool mass during the mission time and size of the scrubbing tank including inner structures. The design of the wet scrubber system include the estimation of the required water mass during the mission time and sizing of the scrubber vessel to contain the water pool. The condensation due to the inlet steam and evaporation due to the steam and non-condensable gas superheat and decay heat from filtered fission products should be considered to estimate the water mass required to maintain its function during the mission time. On the other hand, the level swelling due to the noncondensable gas is another important design aspect on the sizing of the scrubber vessel and determination of the entry elevation of the filtration components such as the droplet separator or filter. The minimum water level based on the minimum collapsed water level should be higher than the exit of scrubber nozzle.

  5. Design Aspects of Wet Scrubber System

    International Nuclear Information System (INIS)

    Lee, Hyun-Chul; Bang, Young-suk; Jung, Woo-Young; Lee, Doo-Yong

    2015-01-01

    The water pool in the wet scrubber system has advantage to cope with decay heat based on the thermal hydraulic balance such as condensation and evaporation inside it. This study focuses on the design aspects of the wet scrubber system to estimate the required water pool mass during the mission time and size of the scrubbing tank including inner structures. The design of the wet scrubber system include the estimation of the required water mass during the mission time and sizing of the scrubber vessel to contain the water pool. The condensation due to the inlet steam and evaporation due to the steam and non-condensable gas superheat and decay heat from filtered fission products should be considered to estimate the water mass required to maintain its function during the mission time. On the other hand, the level swelling due to the noncondensable gas is another important design aspect on the sizing of the scrubber vessel and determination of the entry elevation of the filtration components such as the droplet separator or filter. The minimum water level based on the minimum collapsed water level should be higher than the exit of scrubber nozzle

  6. Predicting pressure drop in venturi scrubbers with artificial neural networks.

    Science.gov (United States)

    Nasseh, S; Mohebbi, A; Jeirani, Z; Sarrafi, A

    2007-05-08

    In this study a new approach based on artificial neural networks (ANNs) has been used to predict pressure drop in venturi scrubbers. The main parameters affecting the pressure drop are mainly the gas velocity in the throat of venturi scrubber (V(g)(th)), liquid to gas flow rate ratio (L/G), and axial distance of the venturi scrubber (z). Three sets of experimental data from five different venturi scrubbers have been applied to design three independent ANNs. Comparing the results of these ANNs and the calculated results from available models shows that the results of ANNs have a better agreement with experimental data.

  7. The study of water droplets electrical charging effect on spray tower scrubber efficiency for feldspar particles removal

    Directory of Open Access Journals (Sweden)

    R Golmohammadi

    2012-01-01

    Full Text Available Background and aims: One of the modern ways introduced nowadays for increasing the collection efficiency of particulate, is the use of electric charge in wet scrubbers. These systems can be used in places in which scrubbers are suitable for contaminant collection. In fact, this system only increases the collection efficiency, and it is not a new technology for contaminant collection.   Methods: First, according to ACGIH recommendation for pilot study a ventilation system was designed and installed. Later, water was charged by using an DC electric exchanger (1275 Volt, DC& product 3×1014 electron on system. Air velocity in the duct was determined by Pitot tube, pressure drop and speed equations, and sampling prop diameter was calculated considering isokenetic conditions. Sampling was performed at two flow rates of 20.3 and 11.4 liter per minute and in overall 72 samples were collected. Sample analysis was performed using gravimetric method and data analysis was performed using SPSS software.      Results: The collection efficiency of inhalable particles in the flow rate of 20.3 liter per minute in a non-electric intervention, and electric intervention with positive and negative charge was 66, 77.67 and 73 percent and in the flow rate of 11.4 liters per minute 60, 69.43 and 68.32 percent respectively. For non-inhalable particles the efficiency in the flow rate 20.3 liter per minute in a non-electric intervention and electric intervention with positive and negative charge was 94.67, 98.33 and 97.67 percent, and in the flow charge of 11/4 liter per minute the flow charge was 91.33, 95, and 97.33 percent respectively.  Conclusion: The results obtained from the experiments, showed that in a certain flow rate, electric intervention increases the efficiency of inhalable particle collection. By the way, this electric intervention has no significant effect on non-inhalable particle collection. Also, the effect of electric intervention with

  8. Hydrodynamics of a Multistage Wet Scrubber Incineration Conditions

    Science.gov (United States)

    Said, M. M.; Manyele, S. V.; Raphael, M. L.

    2012-01-01

    The objective of the study was to determine the hydrodynamics of the two stage counter-current cascade wet scrubbers used during incineration of medical waste. The dependence of the hydrodynamics on two main variables was studied: Inlet air flow rate and inlet liquid flow rate. This study introduces a new wet scrubber operating features, which are…

  9. Scrubbers: A popular Phase I compliance strategy

    International Nuclear Information System (INIS)

    Fink, C.E.; Bissell, P.E.; Koch, B.J.; Rutledge, G.D.

    1992-01-01

    As utilities commit to compliance plans to meet the Phase I requirements of the Clean Air Act Amendments of 1990, there are indications that scrubbing may account for up to 50 percent of the total SO 2 reductions in Phase I. This paper presents and analyzes the critical reasons that explain how and why scrubber-based compliance strategies have developed into the least-cost option in Phase I for many utilities. A hypothetical utility system was simulated to study the impacts of various technological, legislative, and regulatory issues on compliance decisions and costs. Issues evaluated using the hypothetical system include the emissions cap, Clean Air Act and state incentives to scrub, improvements in scrubber technology and costs, and the integration of Phase I and II compliance strategies by the phased installation of scrubbers. In combination, these considerations increase the attractiveness of scrubbers during the 1995-1999 Phase I period. Other considerations that will ultimately influence the amount of Phase I scrubbing capacity include the additional power generation costs associated with fuel switching, the uncertainty of low-sulfur coal price projections, fuel supply flexibility, scrubber market aspects, and socioeconomic considerations

  10. Droplet size in a rectangular Venturi scrubber

    Directory of Open Access Journals (Sweden)

    M. A. M. Costa

    2004-06-01

    Full Text Available The Venturi scrubber is a device which uses liquid in the form of droplets to efficiently remove fine particulate matter from gaseous streams. Droplet size is of fundamental importance for the scrubber performance. In the present experimental study, a laser diffraction technique was used in order to measure droplet size in situ in a Venturi scrubber with a rectangular cross section. Droplet size distribution was measured as a function of gas velocity (58.3 to 74.9 m/s, liquid-to-gas ratio (0.07 to 0.27 l/m³, and distance from liquid injection point (64 to 173 mm. It was found that all these variables significantly affect droplet size. The results were compared with the predictions from correlations found in the literature.

  11. Water scrubbers as new mitigating devices in Swedish reactors

    International Nuclear Information System (INIS)

    Espefaelt, R.

    1988-01-01

    Controlling the containment pressure is an important part of the Swedish severe accident mitigation strategy. As a final measure, venting of the containment atmosphere to the environment is feasible via a filtered venting system using a water scrubber as the filtering device. The comprehensive theoretical and experimental verification of the Multi Venturi Scrubber System has resulted in the following predicted scrubber performance: Both during the scrubber heat-up phase and in long periods of operation, where the water of the scrubber is heated to saturation, a decontamination factor of the order of several thousand is predicted. During no conditions foreseen in the safety analysis are decontamination factors below DF = 500 in the BWR scrubber and DF = 1500 in the PWR scrubber envisaged. These values are equivalent to a retention of 99.8 % and 99.9 % respectively and correspond to a case with only about 10-20 cm of water above the venturi tube outlets and unfavorable gas dynamic conditions. They can be compared to the design values (DF = 100 and 500, respectively) required to limit ground contamination to the very low level specified by Swedish authorities. 1 fig

  12. Mathematical modelling of non-isothermal venturi scrubbers

    Energy Technology Data Exchange (ETDEWEB)

    Rahimi, A. [Isfahan Univ., Isfahan (Iran, Islamic Republic of). Dept. of Chemical Engineering; Taheri, M.; Fathikakajahi, J. [Shiraz Univ., Shiraz (Iran, Islamic Republic of). Dept. of Chemical Engineering

    2005-06-01

    Venturi scrubbers collect gaseous pollutants and particulate matter from industrial exhaust. This air pollution control device is highly efficient, easy to maintain and has a low initial cost. However, the high pressure drop through the device results in a high running cost. The main mechanism for collecting particulates is the inertial impaction of the particles on the droplets, which occurs due to high velocity between the gas stream and droplets. Droplet acceleration and irreversible drag-force which results from this high relative velocity are responsible for the high pressure drop in this type of scrubber. While several attempts have been made to mathematically model particulate removal in Venturi scrubbers, most models do not consider simultaneous heat and mass transfer. This factor is important because most Venturi scrubbers operate under non-isothermal conditions where the inlet gas is humidified in order to cool it before entering the scrubber. For that reason, the authors developed a more realistic model to determine the effects of heat and mass transfer on the particulate removal efficiency of a non-isothermal Venturi type scrubber. The model considers the effect of droplet size distribution and liquid film flow on the walls. It consists of differential equations for energy, momentum and material exchange. Model results were compared with data from experimental studies and industrial facilities. It was concluded that the removal efficiency of the scrubber is influenced by the inlet humidity temperature of the inlet gas. 26 refs., 1 tab., 10 figs.

  13. Scrubber capabilities to remove airborne microorganisms and other aerial pollutants from the exhaust air of animal houses

    NARCIS (Netherlands)

    Aarnink, A.J.A.; Landman, W.J.M.; Melse, R.W.; Zhao, Y.; Ploegaert, J.P.M.; Huynh, T.T.T.

    2011-01-01

    Two studies were conducted to assess the efficiency of air scrubbers to reduce airborne microorganisms in the exhaust air from animal houses. First, in a field study, the effects of a bio-scrubber and an acid scrubber on total bacterial counts were assessed. Higher bacterial counts were found in the

  14. Dust particle removal efficiency of a venturi scrubber

    International Nuclear Information System (INIS)

    Ali, Majid; Yan, Changqi; Sun, Zhongning; Gu, Haifeng; Mehboob, Khurram

    2013-01-01

    Highlights: ► Experimental and theoretical study of dust removal efficiency in venturi scrubber. ► Dust removal efficiency 99.5% is achieved at throat gas velocity 220 m/s. ► Results obtained from mathematical model concur well with experimental results. - Abstract: The venturi scrubber is one of the most efficient gas cleaning devices to remove the contaminated particles from gaseous stream during severe accident in nuclear power plant. This study is focused on the dust particle removal efficiency of the venturi scrubber experimentally and theoretically. The venturi scrubber encapsulates the dust particles in petite water droplets flowing into it. The water injected into the scrubber is in the form of water film. The study investigates the removal efficiency of venturi scrubber for throat gas velocities of 130, 165 and 200 m/s and liquid flow rates 0.3–1 m 3 /h, whereas dust concentration ranges between 0.1 and 1 g/m 3 . The hydrophobic titanium dioxide (TiO 2 ) particles having density 4.23 g/cm 3 and mean diameter of 1 μm are used as dust particles in this research. Filtration technique is used to measure the concentration of dust particles at inlet and outlet. Experimental results show that the removal efficiency is higher with the increase of throat gas velocity and liquid flow rate. A mathematical model is employed for the verification of experimental results. The model concurs well with the experimental results

  15. Effectiveness of multi-stage scrubbers in reducing emissions of air pollutants from pig houses

    OpenAIRE

    Zhao, Y.; Aarnink, A.J.A.; Jong, de, M.C.M.; Ogink, N.W.M.; Groot Koerkamp, P.W.G.

    2011-01-01

    Emissions of air pollutants from livestock houses may raise environmental problems and pose hazards to public health. They can be reduced by scrubbers installed at the air outlets of livestock houses. In this study, three multi-stage scrubbers were evaluated in terms of their effectiveness in reducing emissions of airborne dust, total bacteria, ammonia, and CO2 from pig houses in winter. The three multi-stage scrubbers were one double-stage scrubber (acid stage+ bio-filter), one double-stage ...

  16. Exhaust Gas Scrubber Washwater Effluent

    Science.gov (United States)

    2011-11-01

    variations in the chemistry. Rivers running through soil rich in carbonates will be high in alkalinity. For example, the southern rivers of the Baltic Sea... enviro /Scrubber Test_Report_onboard_Suula.pdf) Waterco. 2010. MultiCyclone for Cooling Towers (http://www.waterco.eu/installations/water- treatment

  17. Investing in Marine Scrubber under Uncertainty with Real Option Thinking

    DEFF Research Database (Denmark)

    Jiang, Liping; Hansen, Carsten Ørts

    works that examine the economic feasibility of scrubber retrofitting through the net present value rule, this paper applies the Real Option Analysis to find the optimal investment strategies. The proposed decision-making framework addresses the uncertainty and the value of deferral option embedded...... in the scrubber investment. The multiple sources of investment uncertainties are explicitly analyzed and integrated in the modeling by using Rainbow option. The results demonstrate that the value of the scrubber investment has significantly increased for several cases by considering the deferral option....... It is thus important for ship owners to consider the available options before proceeding with abandoning or investing strategy. The proposed framework can be widely applied to other ship retrofitting investment evaluations, which include similar investment alternatives and uncertainties....

  18. Numerical Analysis on Behavior of Droplet in Venturi Scrubber

    Energy Technology Data Exchange (ETDEWEB)

    Choi, W. Y.; Lee, D. Y.; Bang, Y. S. [FNC Technology Co. Ltd., Yongin (Korea, Republic of)

    2015-10-15

    At throat, the velocity of the gas would be at maximum and the pressure would be the lowest. Due to pressure difference between inside and outside of the throat, the liquid submerging the venture scrubber would be sucked and atomized. As the gas flow through the diffuser, the pressure would be recovered and the dust in the gas mixture would be captured by the atomized liquid droplets. In this process of dust removal in venture scrubber, atomization (i.e. breakup of liquid droplet in the venturi scrubber) is crucial for filtering efficiency. In order to maintain the high efficiency, the injected liquid should be atomized into fine droplets and well spread. Because of its importance, the experimental study has been conducted by many researchers. However, numerical study has not been conducted extensively. As a preliminary study for estimating filtration efficiency of venturi scrubber by numerical tools, the behavior of droplet inside the venturi scrubber is simulated. Due to the pressure difference inside and outside of the throat, the liquid would be sucked and injected through the holes. The behavior that the liquid is injected through the holes, accelerated by the gas flow and atomized into small sized particles has been observed.

  19. Numerical Analysis on Behavior of Droplet in Venturi Scrubber

    International Nuclear Information System (INIS)

    Choi, W. Y.; Lee, D. Y.; Bang, Y. S.

    2015-01-01

    At throat, the velocity of the gas would be at maximum and the pressure would be the lowest. Due to pressure difference between inside and outside of the throat, the liquid submerging the venture scrubber would be sucked and atomized. As the gas flow through the diffuser, the pressure would be recovered and the dust in the gas mixture would be captured by the atomized liquid droplets. In this process of dust removal in venture scrubber, atomization (i.e. breakup of liquid droplet in the venturi scrubber) is crucial for filtering efficiency. In order to maintain the high efficiency, the injected liquid should be atomized into fine droplets and well spread. Because of its importance, the experimental study has been conducted by many researchers. However, numerical study has not been conducted extensively. As a preliminary study for estimating filtration efficiency of venturi scrubber by numerical tools, the behavior of droplet inside the venturi scrubber is simulated. Due to the pressure difference inside and outside of the throat, the liquid would be sucked and injected through the holes. The behavior that the liquid is injected through the holes, accelerated by the gas flow and atomized into small sized particles has been observed

  20. Numerical Simulations of Airflow and Droplet Dispersion in a Horizontal Ammonia Scrubber

    DEFF Research Database (Denmark)

    Liu, Li; Nielsen, Peter Vilhelm; Heiselberg, Per Kvols

    2015-01-01

    Ammonia released in pig production industries can lead to eutrophication of surface waters, soil acidification, fertilization of vegetation and changes in ecosystems, etc. Air scrubbers with spray of aerosolized sulphur solution were used to remove the ammonia mixed in the airflow ventilated out...... plate or a flow straightener were tested. Impact of nozzle velocity and droplet residue size were analysed. It is found that additional input on the pump pressure to increase the injection velocity may not cause any more benefit in our cases, and the ammonia removal efficiency of the horizontal scrubber...... from a piggery. In this study, numerical method were used to investigate airflow pattern, droplet dispersion, ammonia absorption at droplet surface and overall removal efficiency in an air cleaner. Droplet trajectories and elapsed time in air were adopted to characterize the absorption efficiency...

  1. Integration of chemical scrubber with sodium hypochlorite and surfactant for removal of hydrocarbons in cooking oil fume

    International Nuclear Information System (INIS)

    Cheng, Hsin-Han; Hsieh, Chu-Chin

    2010-01-01

    There are many types of technologies to control cooking oil fumes (COFs), but current typical technologies, such as electrostatic precipitator, conventional scrubber, catalyst, or condenser, are unable to efficiently remove the odorous materials present in COFs which are the primary cause of odor-complaint cases. There is also a lack of information about using sodium hypochlorite (NaOCl) and surfactants to remove contaminants in COFs, and previous studies lack on-site investigations in restaurants. This study presents a chemical scrubber integrated with an automatic control system (ACS) to treat hydrocarbons (HCs) in COFs, and to monitor non-methane HCs (NMHC) and odor as indicators for its efficiency evaluation. The chemical scrubber effectively treats hydrophobic substances in COFs by combining surfactant and NaOCl under optimal operational conditions with NHMC removal efficiency as high as 85%. The mass transfer coefficient (K L a) of NMHC was enhanced by 50% under the NaOCl and surfactant conditions, as compared to typical wet scrubber. Further, this study establishes the fuzzy equations of the ACS, including the relationship between the removal efficiency and K L a, liquid/gas ratio, pH and C NaOCl .

  2. Integration of chemical scrubber with sodium hypochlorite and surfactant for removal of hydrocarbons in cooking oil fume

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Hsin-Han [Graduate School of Engineering Science and Technology, National Yunlin University of Science and Technology, Touliu, Yunlin, Taiwan (China); Hsieh, Chu-Chin, E-mail: hsiehcc@yuntech.edu.tw [Department of Environmental and Safety Engineering, National Yunlin University of Science and Technology, Touliu, Yunlin, Taiwan (China)

    2010-10-15

    There are many types of technologies to control cooking oil fumes (COFs), but current typical technologies, such as electrostatic precipitator, conventional scrubber, catalyst, or condenser, are unable to efficiently remove the odorous materials present in COFs which are the primary cause of odor-complaint cases. There is also a lack of information about using sodium hypochlorite (NaOCl) and surfactants to remove contaminants in COFs, and previous studies lack on-site investigations in restaurants. This study presents a chemical scrubber integrated with an automatic control system (ACS) to treat hydrocarbons (HCs) in COFs, and to monitor non-methane HCs (NMHC) and odor as indicators for its efficiency evaluation. The chemical scrubber effectively treats hydrophobic substances in COFs by combining surfactant and NaOCl under optimal operational conditions with NHMC removal efficiency as high as 85%. The mass transfer coefficient (K{sub L}a) of NMHC was enhanced by 50% under the NaOCl and surfactant conditions, as compared to typical wet scrubber. Further, this study establishes the fuzzy equations of the ACS, including the relationship between the removal efficiency and K{sub L}a, liquid/gas ratio, pH and C{sub NaOCl}.

  3. Effectiveness of multi-stage scrubbers in reducing emissions of air pollutants from pig houses

    NARCIS (Netherlands)

    Zhao, Y.; Aarnink, A.J.A.; Jong, de M.C.M.; Ogink, N.W.M.; Groot Koerkamp, P.W.G.

    2011-01-01

    Emissions of air pollutants from livestock houses may raise environmental problems and pose hazards to public health. They can be reduced by scrubbers installed at the air outlets of livestock houses. In this study, three multi-stage scrubbers were evaluated in terms of their effectiveness in

  4. Refractories for exhaust gas scrubbers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Primary metal smelters are recovering a greater percentage of their stack emissions because of increased global environmental pressures. Copper and nickel producers processing sulfide ore are under particular scrutiny for sulfur dioxide emissions. The use of various acid plant designs and associated scrubbers to capture the gas is commonplace. Failure of acid plant or sulfur dioxide control devices can be very expensive, both in terms of repair costs and lost production. Close attention should be paid to ensure smooth, long term and proper operation of these vessels. With INCO flash furnace shops smelter gases are treated immediately upon leaving the furnace in a particulate scrubber where the gases are cooled and de-dusted in a water spray chamber. The amount of chlorine and fluorine in the waste gas can vary widely, ranging from non-existent to being a major source of concern for refractory wear. Developed specifically for use in hazardous waste incinerators burning fluorine-containing materials, spall-resistant, high-purity alimina bricks were installed in various gas cleaning units in copper smelting plants. Because of the materials's combination of abrasion resistance, thermal cycling resistance, and chemical durability under conditions of variable SO(3) and fluorine attack, the material has proven to be more than adequate for the challenges of gas cleaning equipment. 2 refs.

  5. Effects of Land-Applied Ammonia Scrubber Solutions on Yield, Nitrogen Uptake, Soil Test Phosphorus, and Phosphorus Runoff.

    Science.gov (United States)

    Martin, Jerry W; Moore, Philip A; Li, Hong; Ashworth, Amanda J; Miles, Dana M

    2018-03-01

    Ammonia (NH) scrubbers reduce amounts of NH and dust released from animal rearing facilities while generating nitrogen (N)-rich solutions, which may be used as fertilizers. The objective of this study was to determine the effects of various NH scrubber solutions on forage yields, N uptake, soil-test phosphorus (P), and P runoff. A small plot study was conducted using six treatments: (i) an unfertilized control, (ii) potassium bisulfate (KHSO) scrubber solution, (iii) aluminum sulfate [Al(SO) ⋅14HO, alum] scrubber solution, (iv) sodium bisulfate (NaHSO) scrubber solution, (v) sulfuric acid (HSO) scrubber solution, and (vi) ammonium nitrate (NHNO) fertilizer. The scrubber solutions were obtained from ARS Air Scrubbers attached to commercial broiler houses. All N sources were applied at a rate of 112 kg N ha. Plots were harvested approximately every 4 wk and soil-test P measurements were made, then a rainfall simulation study was conducted. Cumulative forage yields were greater ( scrubber solutions than for alum (6.7 Mg ha) or HSO (6.5 Mg ha) scrubber solutions or for NHNO (6.9 Mg ha). All N sources resulted in higher yields than the control (5.1 Mg ha). The additional potassium in the KHSO treatment likely resulted in higher yields. Although Mehlich-III-extractable P was not affected, water-extractable P in soil was lowered by the alum-based scrubber solution, which also resulted in lower P runoff. This study demonstrates that N captured using NH scrubbers is a viable N fertilizer. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  6. Studi Experimental Penggunaan Venturi Scrubber Dan Cyclonic Separator Untuk Meningkatkan Kinerja Pada Sistem Exhaust Gas Recirculation (EGR) Dalam Menurunkan NOX Pada Motor Diesel

    OpenAIRE

    N, Samsu Dlukha; Ariana, I Made; Fathallah, Aguk Z. M

    2012-01-01

    Salah satu cara yang efektif untuk mengurangi NOX adalah dengan menggunakan metode Exhaust Gas Recirculation (EGR). Dengan metode EGR, oksigen yang masuk ke ruang bakar akan berkurang sehingga NOX dapat diturunkan dengan signifikan, akan tetapi power dari mesin tersebut juga akan berkurang dan Particulate Matter (PM) akan naik secara signifikan. Dalam penelitian ini dibahas penggunaan EGR yang telah di optimalkan dengan penambahan venturi scrubber dan cyclonic separator, tujuannya mengurangi ...

  7. Prediction of hydrodynamic characteristics of a venturi scrubber by using CFD simulation

    Directory of Open Access Journals (Sweden)

    Manisha Bal

    2017-12-01

    Full Text Available The filtered containment venting system (FCVS is a safety relevant system, which consists of venturi scrubber and a mesh filter. FCVS needs to be further assessed to improve the existing performance of the venturi scrubber. Therefore, hydrodynamics is an important counter-component needs to be investigated to improve the design of the venturi scrubber. In the present research, Computational Fluid Dynamic (CFD has been used to predict the hydrodynamic behaviour of a newly designed venturi scrubber. Mesh was developed by gambit 2.4.6 and ansys fluent 15 has been used to predict the pressure drop profile inside the venturi scrubber under various flow conditions. The Reynolds Renormalization Group (RNG k-ε turbulence model and the volume of the fluid (VOF were employed for this simulation. The effect of throat gas velocity, liquid mass flow rate, and liquid loading on pressure drop was studied. Maximum pressure drop 2064.34 pa was achieved at the throat gas velocity of 60 m/s and liquid flow rate of 0.033 kg/s and minimum pressure drop 373.51 pa was achieved at the throat gas velocity of 24 m/s and liquid flow rate of 0.016 kg/s. The results of the present study will assist for proper functioning of venturi scrubber. Keywords: Venturi scrubber, Hydrodynamics, Pressure drop, Computational fluid dynamics, Nuclear power plant safety, Flow prediction

  8. Liquid film thickness and interfacial wave propagate in venturi scrubber for filtered venting

    International Nuclear Information System (INIS)

    Nakao, Yasuhiro; Horiguchi, Naoki; Kanagawa, Tetsuya; Kaneko, Akiko; Abe, Yutaka; Yoshida, Hiroyuki

    2016-01-01

    As one of filtered venting systems which should be installed in light water reactors from the viewpoint of protecting a containment vessel and suppressing the diffusion of radioactive materials, there is a system composed of venturi scrubbers. The radioactive materials in the contaminated gas are collected into liquid. By forming dispersed flow in the venturi scrubber, interfacial area between liquid and gas is enhanced, finally, large decontamination factor is realized. In evaluation for the decontamination performance of the venturi scrubber, interface characteristics of droplets and liquid film are important. In this study, as a part of evaluation method of the interfacial area, the liquid film thickness in the venturi scrubber was measured. And evaluate the results of investigation experimentally for each ruffling average thickness and liquid film in a fluidized condition. The cross section area of a venturi scrubber is a rectangular one manufactured a transparent acrylic for visualization. In the venturi scrubber, a pressure drop occurs in the throat part by the inflow of air from the compressor. Water flows from the tank by a pressure difference between a suctioned hole with head pressure and a throat part. An annular spray flow is then formed in the venturi scrubber. (author)

  9. Separation of finest dusts in Venturi scrubber with hybrid nozzles

    Energy Technology Data Exchange (ETDEWEB)

    Reither, K. [Reither Venturiwaescher GmbH, Troisdorf (Germany); Boerger, G.G.; Listner, U.; Schweitzer, M. [Bayer AG, Leverkusen (Germany)

    2001-03-01

    Venturi scrubbers are high-performance dust separators whose efficiency is closely connected with high pressure losses. The tube-slot Venturi scrubber with hybrid nozzles is a novel scrubber type of simple and compact design, by means of which high separation efficiency is reached with pressure losses practically tending to zero. This new wet scrubber is particularly suitable for refitting existing plants. (orig.)

  10. Studi Experimental Penggunaan Venturi Scrubber dan Cyclonic Separator Untuk Meningkatkan Kinerja pada Sistem Exhaust Gas Recirculation (EGR dalam Menurunkan NOX pada Motor Diesel

    Directory of Open Access Journals (Sweden)

    Samsu Dlukha N

    2012-09-01

    Full Text Available Salah satu cara yang efektif untuk mengurangi NOX adalah dengan menggunakan metode Exhaust Gas Recirculation (EGR. Dengan metode EGR, oksigen yang masuk ke ruang bakar akan berkurang sehingga NOX dapat diturunkan dengan signifikan, akan tetapi power dari mesin tersebut juga akan berkurang dan Particulate Matter (PM akan naik secara signifikan. Dalam penelitian ini dibahas penggunaan EGR yang telah di optimalkan dengan penambahan venturi scrubber dan cyclonic separator, tujuannya mengurangi NOX tanpa meningkatkan PM. Hasil pengujian menunjukkan NOX turun sebesar 48.89% dan PM turun dari 69,87%  menjadi 9.87%.

  11. The Dynamics of Aerosols in Condensational Scrubbers

    DEFF Research Database (Denmark)

    Johannessen, Jens Tue; Christensen, Jan A.; Simonsen, Ole

    1997-01-01

    A mathematical model for the simulation of the dynamics of aerosol change in condensational scrubbers and scrubbing condensers is proposed. The model is applicable for packed column gas/liquid contact when plug flow can be assumed. The model is compared with experimental data for particle removal...... for their estimation is proposed. The behaviour of scrubbers and condensers for some important technical applications is demonstrated by model simulations. (C) 1997 Elsevier Science Ltd....

  12. Effects of land-applied ammonia scrubber solutions on yield, nitrogen uptake, soil test phosphorus and phosphorus runoff

    Science.gov (United States)

    Ammonia (NH3) scrubbers reduce amounts of NH3 and dust released from animal rearing facilities, while generating nitrogen (N) rich solutions, which may be used as fertilizer. The objective of this study was to determine the effects of various NH3 scrubber solutions on yields, N uptake by forage, so...

  13. Retrofitting existing chemical scrubbers to biotrickling filters for H2S emission control.

    Science.gov (United States)

    Gabriel, David; Deshusses, Marc A

    2003-05-27

    Biological treatment is a promising alternative to conventional air-pollution control methods, but thus far biotreatment processes for odor control have always required much larger reactor volumes than chemical scrubbers. We converted an existing full-scale chemical scrubber to a biological trickling filter and showed that effective treatment of hydrogen sulfide (H2S) in the converted scrubber was possible even at gas contact times as low as 1.6 s. That is 8-20 times shorter than previous biotrickling filtration reports and comparable to usual contact times in chemical scrubbers. Significant removal of reduced sulfur compounds, ammonia, and volatile organic compounds present in traces in the air was also observed. Continuous operation for >8 months showed stable performance and robust behavior for H2S treatment, with pollutant-removal performance comparable to that achieved by using a chemical scrubber. Our study demonstrates that biotrickling filters can replace chemical scrubbers and be a safer, more economical technique for odor control.

  14. Effect of nozzle arrangement on Venturi scrubber performance

    Energy Technology Data Exchange (ETDEWEB)

    Ananthanarayanan, N.V.; Viswanathan, S.

    1999-12-01

    The effect of nozzle arrangement on flux distribution is studied in a rectangular, pilot-scale, Pease-Anthony-type Venturi scrubber. The annular, two-phase, heterogeneous, three-dimensional gas-liquid flow inside the scrubber is modeled using a commercial computational fluid dynamic (CFD) package, FLUENT. The comparison of predicted liquid drop concentration shows good agreement with experimental data. The model predicts the fraction of liquid flowing as film on the walls reasonably well. Visualization of flux patterns studied using four typical nozzle configurations indicate that the nonuniformity in flux distribution increases when the nozzle-to-nozzle distance is greater than 10% of the width of the side on which the nozzles are placed. An analysis of the effect of multiple jet penetration lengths on liquid flux distribution yielded a comparable distribution at 10--45% less liquid than uniform penetration for a particular nozzle configuration. This would lead to significant improvements in scrubber performance by achieving comparable collection efficiency at a lower pressure drop.

  15. Cylinder supplied ammonia scrubber testing in IDMS

    International Nuclear Information System (INIS)

    Lambert, D.P.

    1994-01-01

    This report summarizes the results of the off-line testing the Integrated DWPF Melter System (IDMS) ammonia scrubbers using ammonia supplied from cylinders. Three additional tests with ammonia are planned to verify the data collected during off-line testing. Operation of the ammonia scrubber during IDMS SRAT and SME processing will be completed during the next IDMS run. The Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) scrubbers were successful in removing ammonia from the vapor stream to achieve ammonia vapor concentrations far below the 10 ppM vapor exit design basis. In most of the tests, the ammonia concentration in the vapor exit was lower than the detection limit of the analyzers so results are generally reported as <0.05 parts per million (ppM). During SRAT scrubber testing, the ammonia concentration was no higher than 2 ppM and during SME testing the ammonia concentration was no higher than 0.05 m

  16. Development and evaluation of a full-scale spray scrubber for ammonia recovery and production of nitrogen fertilizer at poultry facilities.

    Science.gov (United States)

    Hadlocon, Lara Jane S; Manuzon, Roderick B; Zhao, Lingying

    2015-01-01

    Significant ammonia emissions from animal facilities need to be controlled due to its negative impacts on human health and the environment. The use of acid spray scrubber is promising, as it simultaneously mitigates and recovers ammonia emission for fertilizer. Its low pressure drop contribution on axial fans makes it applicable on US farms. This study develops a full-scale acid spray scrubber to recover ammonia emissions from commercial poultry facilities and produce nitrogen fertilizer. The scrubber performance and economic feasibility were evaluated at a commercial poultry manure composting facility that released ammonia from exhaust fans with concentrations of 66-278 ppmv and total emission rate of 96,143 kg yr(-1). The scrubber consisted of 15 spray scrubber modules, each equipped with three full-cone nozzles that used dilute sulphuric acid as the medium. Each nozzle was operated at 0.59 MPa with a droplet size of 113 μm and liquid flow rate of 1.8 L min(-1). The scrubber was installed with a 1.3-m exhaust fan and field tested in four seasons. Results showed that the scrubber achieved high NH3 removal efficiencies (71-81%) and low pressure drop (scrubber effluents containing 22-36% (m/v) ammonium sulphate are comparable to the commercial-grade nitrogen fertilizer. Preliminary economic analysis indicated that the break-even time is one year. This study demonstrates that acid spray scrubbers can economically and effectively recover NH3 from animal facilities for fertilizer.

  17. Radiological engineering evaluation of the delay time line air scrubber located at the Clinton P. Anderson Meson Physics Facility (LAMPF)

    International Nuclear Information System (INIS)

    Huneycutt, S.E.

    1996-05-01

    The purpose of this study was to determine the effects of the addition of an air scrubber to an already existing delay line and whether it would scrub 11 CO 2 . There were three main objectives of this study. The first objective was to determine the scrubbing efficiency of the scrubber. The scrubbing efficiency was then used to predict the dose rates in the scrubber area and compare those values with measurements from radiological surveys. The third objective was to determine if the shield blocks were effective in reducing the dose rates in the scrubber area. The activities were measured before and during scrubber operation and this information was used to calculate the scrubbing efficiency and the efficiency of 11 CO 2 removal was determined to be around 50%. Microshield was then used to predict dose rates and compared those values with measurements from radiological surveys. This was also used to determine the that the shield blocks around the scrubber were effective in reducing the dose rates from the radiation field produced by the radionuclides in the scrubber

  18. Nitrogen tetroxide vapor scrubber using a recirculating liquid

    Science.gov (United States)

    Reisert, T. D.

    1978-01-01

    Scrubbers required to reduce N2O4 contamination of nitrogen vent gas streams to a safe level to preclude health hazard to personnel and to preclude adverse environmental effects were developed. The scrubber principle involved is to absorb and neutralize the N2O4 component in a closed circuit circulating water/chemical solution in a vertical counter-flow, packed-tower configuration. The operational and performance test requirements for the scrubbers consist of demonstrating that the exit gas contamination level from the scrubbers does not exceed 150 ppm oxidizer under any flow conditions up to 400 scfm with inlet concentrations of up to 100,000 ppm oxidizer. Several problems were encountered during the performance testing that led to a series of investigations and supplementary testing. It was finally necessary to change the scrubber liquors in oxidizer scrubber to successfully achieve performance requirements. The scrubbers, the test configuration, and the various tests performed are described.

  19. Retention of nitrous gases in scrubber columns

    International Nuclear Information System (INIS)

    Nakazone, A.K.; Costa, R.C.; Lobao, A.S.T.; Matsuda, H.T.; Araujo, B.F. de

    1988-01-01

    During the UO 2 dissolution in nitric acid, some different species of NO (sub)x are released. The off gas can either be refluxed to the dissolver or be released and retained on special colums. The final composition of the solution is the main parameter to take in account. A process for nitrous gases retention using scrubber colums containing H 2 O or diluted HNO 3 is presented. Chemiluminescence measurement was employed to NO x evaluation before and after scrubing. Gas flow, temperature, residence time are the main parameters considered in this paper. For the dissolution of 100g UO 2 in 8M nitric acid, a 6NL/h O 2 flow was the best condition for the NO/NO 2 oxidation with maximum absorption in the scrubber columns. (author) [pt

  20. Passive self-cleaning aerosol scrubber

    International Nuclear Information System (INIS)

    Postma, A.K.

    1981-01-01

    A hybrid gas scrubbing system is described, which includes features of both a pool type scrubber and a sand or ground filter, for use on nuclear reactor containment buildings to limit release of aerosol particles and absorbable gases, including radio-active materials, during postulated major accidents. The system requires no energy while in the passive state and no active energy other than pressurization of the stream of gas being scrubbed. (U.K.)

  1. Evaluation of a Zirconium Recycle Scrubber System

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, Barry B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bruffey, Stephanie H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-04-01

    A hot-cell demonstration of the zirconium recycle process is planned as part of the Materials Recovery and Waste Forms Development (MRWFD) campaign. The process treats Zircaloy® cladding recovered from used nuclear fuel with chlorine gas to recover the zirconium as volatile ZrCl4. This releases radioactive tritium trapped in the alloy, converting it to volatile tritium chloride (TCl). To meet regulatory requirements governing radioactive emissions from nuclear fuel treatment operations, the capture and retention of a portion of this TCl may be required prior to discharge of the off-gas stream to the environment. In addition to demonstrating tritium removal from a synthetic zirconium recycle off-gas stream, the recovery and quantification of tritium may refine estimates of the amount of tritium present in the Zircaloy cladding of used nuclear fuel. To support these objectives, a bubbler-type scrubber was fabricated to remove the TCl from the zirconium recycle off-gas stream. The scrubber was fabricated from glass and polymer components that are resistant to chlorine and hydrochloric acid solutions. Because of concerns that the scrubber efficiency is not quantitative, tests were performed using DCl as a stand-in to experimentally measure the scrubbing efficiency of this unit. Scrubbing efficiency was ~108% ± 3% with water as the scrubber solution. Variations were noted when 1 M NaOH scrub solution was used, values ranged from 64% to 130%. The reason for the variations is not known. It is recommended that the equipment be operated with water as the scrubbing solution. Scrubbing efficiency is estimated at 100%.

  2. A New Perspective at the Ship-Air-Sea-Interface: The Environmental Impacts of Exhaust Gas Scrubber Discharge

    Directory of Open Access Journals (Sweden)

    Sonja Endres

    2018-04-01

    Full Text Available Shipping emissions are likely to increase significantly in the coming decades, alongside increasing emphasis on the sustainability and environmental impacts of the maritime transport sector. Exhaust gas cleaning systems (“scrubbers”, using seawater or fresh water as cleaning media for sulfur dioxide, are progressively used by shipping companies to comply with emissions regulations. Little is known about the chemical composition of the scrubber effluent and its ecological consequences for marine life and biogeochemical processes. If scrubbers become a central tool for atmospheric pollution reduction from shipping, modeling, and experimental studies will be necessary to determine the ecological and biogeochemical effects of scrubber wash water discharge on the marine environment. Furthermore, attention must be paid to the regulation and enforcement of environmental protection standards concerning scrubber use. Close collaboration between natural scientists and social scientists is crucial for progress toward sustainable shipping and protection of the marine environment.

  3. SCRUBBERS AS SHIPOWNERS’ RESPONSE TO THE SULPHUR DIRECTIVE AND ITS IMPLICATIONS FOR THE WASTE MANAGEMENT IN BALTIC PORTS

    Directory of Open Access Journals (Sweden)

    Magdalena Klopott

    2015-12-01

    Full Text Available The paper investogates the recent developments in exhaust gas cleaning systems and the growing interests in scrubber installation among ferry and ro-ro shipowners operating on the Baltic Sea. This technology creates the need for reception of scrubber sludge, which is produced alongside with gas cleaning. The study states that the information about the disposal of scrubber waste is largely limited or vague and evaluates – on the basis of a questionnaire - the availability of port reception facilities for the disposal of waste from sulphur scrubbers at major Baltic Sea ports. The paper concludes that a review of current legislature on port reception facilities is absolutely necessary and expresses the hope that the situation will improve in the wake of recent environmental regulations.

  4. Micro- and Nanostructural Characteristics of Particles Before and After an Exhaust Gas Recirculation System Scrubber

    DEFF Research Database (Denmark)

    Lieke, Kirsten Inga; Rosenørn, Thomas; Pedersen, Jannik

    2013-01-01

    microscopy (TEM) grids on two stages. Micro- and nanostructural characteristics of sin-gle particles were studied by TEM. Image analysis was carried out on overview and high-resolution images, revealing influence of the exhaust gas treatment (scrubber) on the particle morphology and mixing state. Soot......This work provides insight into the morphology and mixing state of submicron particles in diesel exhaust from a ship engine with an exhaust gas recirculation scrubber. Particles from this low-speed ship engine on test bed were collected using a microiner-tial impactor with transmission electron...

  5. Algal Turf Scrubbers: Cleaning Water While Capturing Solar Energy

    International Nuclear Information System (INIS)

    Adey, W.

    2009-01-01

    Algal Turfs and Algal Turf Scrubbers (ATS) Algal Turfs are bio diverse communities of unicellular to filamentous algae of all major algal phyla. Algal Turf Scrubbers (ATS) are bioengineered ecosystems dominated by algal turfs. They clean water to very high quality, and remove CO 2 from the atmosphere by capturing solar energy at rates 10 times that of agriculture and 50 times that of forestry. ATS was invented at the Smithsonian Institution, by scientist, Walter Adey in the 1980s as a tool for controlling water quality in highly diverse model ecosystems. The technology received extensive R and D for aqua cultural, municipal, and industrial water cleaning by Dr. Adey, using venture capital, through the 1990s. Later, Hydro Mentia, Inc., of Ocala, Florida, engineered ATS to landscape scale of 20-50 Mgpd (it is important to note that this is a modular system, capable of expanding to any size.) A 2005 independent study of ATS, by the South Florida Water Management District and the IFAS Institute of the University of Florida, certified ATS as 5-100 times more cost efficient at removing nutrients from Everglades canal waters than the next competitor, the STA, a managed marsh system. ATS and STA were the final contestants in a 15-year study of nine technologies, and ATS was the only technology that created a use able byproduct.

  6. CASE STUDY

    African Journals Online (AJOL)

    2011-06-02

    Jun 2, 2011 ... immunosuppression associated with HIV/AIDS puts them at a higher risk of developing oesophageal cancer. 47. CASE STUDY. A 49-year-old man was diagnosed as HIV infected, with a CD4 count of 60 cells/µl. He was started on an antiretroviral treatment regimen comprising zidovudine, lamivudine and ...

  7. Performance assessment of containment filtered venting system with Venturi scrubber

    International Nuclear Information System (INIS)

    Adinarayna, K.N.V.; Ali, Seik Mansoor; Balasubramaniyan, V.

    2015-01-01

    Venting through appropriate filtration systems is now being considered as a severe accident management strategy for maintaining the containment integrity and also as a means to reduce the radiological consequences to the public and environment. The option of filtered containment venting appears to have assumed significance in the post- Fukushima accident backdrop. Back-fitting of a suitable Venturi scrubber based CFVS for the Indian BWRs (TAPS- 1 and 2) at Tarapur is now being contemplated. Several key issues need to be carefully addressed for ensuring the desired functional capability of such a system. At the outset, this paper highlights a few thermal hydraulic issues that are of interest from regulatory perspective. This is followed by a detailed description of the mathematical models developed for assessing the depressurization characteristics of CFVS, energy absorption capacity of the Scrubber Tank (ST) water inventory, iodine removal and aerosol retention capability etc. Finally, application of these models to investigate the response of CFVS under twin unit SBO conditions in TAPS-1 and 2 is presented. The studies presented here give insight into the key variables affecting the CFVS performance and would be useful to both the system designer as well as the regulator. (author)

  8. Development of structure design program for venturi scrubber working at self-priming mode

    International Nuclear Information System (INIS)

    Wang Meng; Sun Zhongning; Gu Haifeng

    2012-01-01

    A structure design program was developed for Venturi scrubber working at the self-priming mode. This program proposed a complete logic for thermal parameters calculation and structure design of the throat. A revised calculation for resistance relationship was carried out based on experimental study. The relative error between revised results and experimental values is within 8.6%. (authors)

  9. Maximizing the performance of a multiple-stage variable-throat venturi scrubber for particle collection

    Science.gov (United States)

    Muir, D. M.; Akeredolu, F.

    The high collection efficiencies that are required nowadays to meet the stricter pollution control standards necessitate the use of high-energy scrubbers, such as the venturi scrubber, for the arrestment of fine particulate matter from exhaust gas streams. To achieve more energy-efficient particle collection, several venturi stages may be used in series. This paper is principally a theoretical investigation of the performance of a multiple-stage venturi scrubber, the main objective of the study being to establish the best venturi design configuration for any given set of operating conditions. A mathematical model is used to predict collection efficiency vs pressure drop relationships for particle sizes in the range 0.2-5.0 μm for one-, two-, three- and four-stage scrubbers. The theoretical predictions are borne out qualitatively by experimental work. The paper shows that the three-stage venturi produces the highest collection efficiencies over the normal operating range except for the collection of very fine particles at low pressure drops, when the single-stage venturi is best. The significant improvement in performance achieved by the three-stage venturi when compared with conventional single-stage operation increases as both the particle size and system pressure drop increase.

  10. Research on injection characteristics of venturi scrubber worked in self-priming mode

    International Nuclear Information System (INIS)

    Zhou Yanmin; Sun Zhongning; Gu Haifeng; Miao Zhuang

    2015-01-01

    The injection characteristics of Venturi scrubber worked in self-priming mode in containment filter venting system was studied experimentally under different air flows, liquid levels and system pressures. The results indicate that with the increase of superficial gas velocity in throat, the static pressure drop of both sides of the suction grows approximately following a parabolic law, and the injection flow rate injecting into the Venturi scrubber increases linearly. The effect of liquid level on injection characteristics relates closely with the relative position to the outlet of the Venturi scrubber. When the liquid level is below the outlet, the injection flow rate improves significantly with increasing liquid level and presents a partition phenomenon, and in the low throat velocity, the increase of liquid level is more effective to improve the injection flow rate. However, when the liquid level is above the outlet, it almost has no impact on the injection flow rate. The pressure is another important factor affecting the injection characteristic of self-priming Venturi scrubber, which is mainly caused by the change on gas density. In the range of 0.150 kPa, with the increase of pressure, the injection flow rate improves greatly and the influence of pressure is more obvious in high throat velocity than in low throat velocity. (authors)

  11. Casing study

    Energy Technology Data Exchange (ETDEWEB)

    Roche, P.

    2000-12-01

    An unorthodox method of casing drilling used by Tesco Corporation at a gas well in Wyoming to drill deeper using casings as drillpipe is discussed. The process involves either rotating the casing as drill string or using a downhole mud motor to rotate the bit. In this instance, the surface hole and the production hole were casing-drilled to a record 8,312 feet by rotating the casing. The 8 1/2-inch surface hole was drilled with 7-inch casing to 1,200 feet using a Tesco underreamer and a polycrystalline pilot bit; drilling and cementing was completed in 12 1/2 hours. The 6 1/4-inch production hole was drilled with 4 1/2-inch casing and the bottomhole assembly was retrieved after 191 hours rotating. This case was the first in which the entire well was casing-drilled from surface to TD. Penetration rate compared favorably with conventional methods: 12 1/2 hours for casing-drilling to 18.9 hours for conventional drilling, despite the fact that the casing-drilling technology is still in its infancy. It is suggested that casing-drilling has the potential to eliminate the need for the drillpipe entirely. If these expectations were to be realised, casing-drilling could be one of the most radical drilling changes in the history of the oil and gas industry. 1 photo.

  12. Heat recovery using a venturi scrubber

    International Nuclear Information System (INIS)

    Gilbert, W.J.

    1982-01-01

    When an air pollution problem involves scrubbing at relatively elevated temperatures, the possibility exists for practical use of the heat contained with the gas. A venturi type scrubber has been shown to successfully handle such hot exhaust gases for removal of both gases and particulates, as well as heat recovery. The use of a relatively simple overall system, using the recirculated liquid loop for space heating, can be made practical and efficient. Whenever possible, this will allow the scrubbing equipment, normally considered a nuisance, to actually produce a pay-back for the customer. Careful consideration must be given to all aspects of the system's installation, operation, and maintenance. The feasibility of such a system depends on conditions at the particular location and the relative need for a low temperature heat source

  13. Transport evaluation of a gas-liquid scrubber

    International Nuclear Information System (INIS)

    Brodner, A.J.; Bistline, J.E.; Weber, S.E.

    1982-10-01

    The hydraulics and the mass-transfer behavior of a five-tray, single-bubble-cap, single-downcomer, gas-liquid contactor were studied for use as a gas scrubber. Flooding was not observed at the maximum available liquid and gas flow rates of 0.32 and 464 L/min, respectively. The maximum liquid entrainment was 33% at a gross liquid flow rate of 0.05 L/min. The Murphree-tray efficiencies for absorption of CO 2 (5000 ppM in air) into demineralized water ranged from 0.14 to 0.74 for volumetric liquid-to-gas ratios of 4 x 10 -4 and 2 x 10 -4 , respectively, for k/sub L/a values ranging from 0.088 to 0.36 min -1 . 12 figures, 10 tables

  14. CASE STUDY

    African Journals Online (AJOL)

    HIV infection has several oral manifestations, including oral candidiasis and oral hairy leucoplakia. Occasionally unusual presentations requiring rigorous investigations are seen, and in these cases the diagnosis sometimes remains a dilemma owing to limited investigation facilities.1-3 We present the case of a patient who.

  15. Influence of brick air scrubber by-product on growth and development of corn and hybrid poplar.

    Science.gov (United States)

    Thomas, Carla N; Bauerle, William L; Owino, Tom O; Chastain, John P; Klaine, Stephen J

    2007-03-01

    Studies were conducted to determine the effects of spent reagent from air pollution control scrubbers used at a brick manufacturing facility on emergence, growth, and physiological responses of corn and hybrid poplar plants. Scrubber by-product was obtained from General Shale Brick, Louisville, KY. Potting substrate was weighed and quantities of scrubber by-product were added to the substrate to obtain treatments of 0%, 6.25%, 12.5%, 25%, 50%, 75%, and 100% scrubber by-product (w:w) for the corn study. Each treatment mix was potted into nine replicate polyethylene pots and four corn seeds were sown per pot. The pots were randomized in a greenhouse at Clemson University and the number of seedlings emerging from each treatment, dark-adapted leaf chlorophyll a fluorescence, and shoot heights were measured at the end of a 21-day growth period. Then, dry shoot biomass was determined for plants from each treatment and plant tissues were analyzed for selected constituents. For the poplar study, nine-inch cuttings of hybrid poplar clone 15-29 (Populus trichocarpa x P. deltoides) and clone OP367 (P. deltoides x P. nigra) were planted in treatments of scrubber by-product-potting soil mixes of 0% , 5% , 10% , and 25% w:w. Leaf chlorophyll a fluorescence was measured over six weeks and cumulative leaf area, dry biomass, and nutrient content of tissues were determined upon harvest. Results of these studies indicate that percent seedling emergence for corn plants decreased with increasing scrubber by-product application rates. Application rates up to 12.5% scrubber by-product w:w had no adverse effect on corn seedling emergence. Shoot elongation, biomass production, and the status of the photosynthetic apparatus of the seedlings were also not severely impaired at applications below this level. A critical value of 58.2% w:w scrubber by-product was estimated to cause 25% inhibition of seedling emergence. Biomass production, cumulative leaf area, and chlorophyll a fluorescence of

  16. Scrubber-Integrated Wet Electrostatic Precipitator; Skrubberintegrerat vaatt elektrofilter, WESP

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Sven; Baefver, Linda; Davidsson, Kent; Pettersson, Jens; Schmidt, Hans; Strand, Michael; Yngvesson, Johan

    2011-07-01

    sulphur dominated the composition of the dust. The concentration of droplet carry-over from the scrubber stage and droplet separation in the WESP was calculated by adding LiBr tracer to the scrubber liquid and using a mass balance for Li. The droplet concentration was thus estimated at 33 mg/Nm{sup 3} dg. upstream of the WESP and <0.023 mg/Nm{sup 3} dg. downstream, corresponding to a removal efficiency of > 99.9% for the droplets from the scrubber. On-line-measurement of number concentration and size distribution (0.007-7 {mu}m) was performed using two ELPI (Electrical Low Pressure Impactor) operating at <40 deg C. In order to cool the gas while avoiding condensing, a sampling system was developed and verified. The ELPI measurements enabled the removal efficiency to be determined as a function of WESP electrode voltage, which means that the energy consumption can be optimised by controlling the WESP voltage. The WESP showed high removal efficiencies, low emission levels, stable operation and was found to have the lowest energy consumption of the studied dust removal technologies. Visual inspection of the FRP collector showed no signs of impact from 10 weeks of continuous operation. WESP is applicable to Waste-to-Energy plants, but should also be suitable for combustion of biomass and hazardous waste and for chemical industry. The project has resulted in a commercially available product Keywords: Wet Electrostatic Precipitator, dust removal, flue gas cleaning, submicron particles.

  17. case study

    African Journals Online (AJOL)

    Elton

    particularly in patients who commence ART with low CD4 counts and established opportunistic infections. IRIS results from a pathological inflammatory response to pre-existing infective, host or other antigens, alive or dead, causing clinical deterioration in HIV-infected patients after initiating ART.1 A case definition for IRIS ...

  18. CASE STUDY

    African Journals Online (AJOL)

    2010-09-01

    Sep 1, 2010 ... of the two diseases surgery can be successful, recovery can be similar to that .... lymphocytes predominated in 68% of cases, and that there was an .... using ferritin is the fact that it acts as an acute-phase reactant and will be ...

  19. The ways of mass transfer intensification in industrial jet scrubbers

    Directory of Open Access Journals (Sweden)

    Shilyaev Michael

    2015-01-01

    Full Text Available This paper is devoted to parametrical analysis of model, and is aimed at understanding its possibilities to find the most profitable conditions for the technical processes. These processes should consider the maximal extraction of gas and mechanical admixtures from the flow on the droplets of irrigating liquid and reduce the dimensions of hollow direct-flow jet scrubbers (DFJS and Venturi scrubbers (VS.

  20. Case Study: Testing with Case Studies

    Science.gov (United States)

    Herreid, Clyde Freeman

    2015-01-01

    This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's issue discusses using case studies to test for knowledge or lessons learned.

  1. The importance of CFD methods to the design of huge scrubber systems

    International Nuclear Information System (INIS)

    Maier, H.

    2005-01-01

    Due to the influence of the multiphase flow on the scrubber removal performance Austrian Energy and Environment started research end development in co-operation with universities on the simulation of wet scrubber systems using CFD methods (Computational removal performance). In November 2001 the spray banks were reconstructed with a minimum of requirements according to the concept of AE and E. The first experiences in operation already showed a significant improvement. In July 2002 measurements of the SO 2 -profile confirmed the experiences of the client. The high SO 2 peaks nearly disappeared at the absorber wall. Furthermore the changes resulted in a more homogenous SO 2 distribution in the clean gas which was also found out by measurements in the outlet duct. According to the client the LG-ratio could be reduced. Nearly every load case can now be handled with one active spray bank less. With respect to energy consumption of the plant this means a remarkable reduction of operational costs. Compared to that the scrubbers of the FGD system in Neurath will have a flue gas capacity nearly twice much as that of the FGD plant in Heyden. The start up will take place in 2008

  2. Solubility of flue gas components in NaOH based scrubber solutions

    Energy Technology Data Exchange (ETDEWEB)

    Sandelin, K; Backman, R

    1997-11-01

    The work reported here is a thermodynamic study on the solubility of flue gas components in aqueous solutions containing sodium salts. The result of the work is an equilibrium model. The model presented here includes sodium hydroxide and sodium salts that makes it possible to study simultaneous absorption of flue gas components in alkaline scrubber solutions. The model is applied on the absorption of a flue gas into a NaOH scrubber solution. The calculations show that it is possible to simultaneously absorb sulfur dioxide, sulfuric acid, and ammonia without carbon dioxide co-absorption. The calculations also show that gaseous NO and N{sub 2}O cannot be scrubbed unless they are oxidized to nitrate or reduced to ammonia. (author) SIHTI 2 Research Programme. 59 refs.

  3. Gas pollutants removal in a single- and two-stage ejector-venturi scrubber.

    Science.gov (United States)

    Gamisans, Xavier; Sarrà, Montserrrat; Lafuente, F Javier

    2002-03-29

    The absorption of SO(2) and NH(3) from the flue gas into NaOH and H(2)SO(4) solutions, respectively has been studied using an industrial scale ejector-venturi scrubber. A statistical methodology is presented to characterise the performance of the scrubber by varying several factors such as gas pollutant concentration, air flowrate and absorbing solution flowrate. Some types of venturi tube constructions were assessed, including the use of a two-stage venturi tube. The results showed a strong influence of the liquid scrubbing flowrate on pollutant removal efficiency. The initial pollutant concentration and the gas flowrate had a slight influence. The use of a two-stage venturi tube considerably improved the absorption efficiency, although it increased energy consumption. The results of this study will be applicable to the optimal design of venturi-based absorbers for gaseous pollution control or chemical reactors.

  4. Particle collection by a pilot plant venturi scrubber downstream from a pilot plant electrostatic precipitator

    Science.gov (United States)

    Sparks, L. E.; Ramsey, G. H.; Daniel, B. E.

    The results of pilot plant experiments of particulate collection by a venturi scrubber downstream from an electrostatic precipitator (ESP) are presented. The data, which cover a range of scrubber operating conditions and ESP efficiencies, show that particle collection by the venturi scrubber is not affected by the upstream ESP; i.e., for a given scrubber pressure drop, particle collection efficiency as a function of particle diameter is the same for both ESP on and ESP off. The experimental results are in excellent agreement with theoretical predictions. Order of magnitude cost estimates indicate that particle collection by ESP scrubber systems may be economically attractive when scrubbers must be used for SO x control.

  5. Numerical simulation of self-priming phenomena in venturi scrubber by two-phase flow simulation code TPFIT

    International Nuclear Information System (INIS)

    Horiguchi, Naoki; Kanagawa, Tetsuya; Kaneko, Akiko; Abe, Yutaka; Yoshida, Hiroyuki

    2015-01-01

    In the wake of Fukushima Daiichi nuclear disaster, reviews of the safety of nuclear facilities have been conducted in the world beginning with Japan. Countermeasures against severe accidents in nuclear power plants are an urgent need. In particular, from the viewpoint of protecting containment and suppressing diffusion of the radioactive materials, it is important to install filtered venting devices to release high pressure pollutant gas to the atmosphere with elimination radioactive materials in the gas. One of the devices for the filtered venting is a Multi venturi scrubber system (MVSS), which is used to realize filtered venting without any power supply in European reactors. The MVSS is composed of a “venturi Scrubbers” part, in which there are hundreds of the venturi scrubbers, and a “bubble column” part. In the MVSS, all of the venturi scrubbers is branched off from a vent line which connect between the containment and the MVSS. In an operation mode of the MVSS, the radioactive materials are eliminated through the gas-liquid interface from the pollutant gas to the liquid phase of a dispersed flow in the venturi scrubber and a bubbly flow in the bubble column part. The dispersed flow is formed from the liquid, which is suctioned from around the venturi scrubber through the hole for suction (called self-priming). In previous studies, an evaluation method for the scrubbing performance of the venturi scrubber was developed. However, actual hydraulic behavior in it is too complicated, the previous evaluation was not validated the hydraulic behavior and studied the effect of differences between the simulated hydraulic behavior and an actual one on the performance of the venturi scrubber. To develop a validated evaluation method for the scrubbing performance, it is important to develop detailed evaluation method for the hydraulic behavior in the venturi scrubber. To simulate the complicated hydraulic behavior, we consider to use analysis code TPFIT. Then, the

  6. SPREADING OF A FLUID JET ON THE CORRUGATED SURFACE OF THE STRUCTURED PACKING OF WET SCRUBBERS

    Directory of Open Access Journals (Sweden)

    Gorodilov A.A.

    2014-08-01

    Full Text Available The new packing for wet scrubbers for cooling exhaust gases of furnaces is presented. Spreading features of the fluid jet on the corrugated surface of the proposed packing have been studied. Flow rate of the liquid flowing through slits to the opposite side of the packing element was determined. Several regimes of a fluid flow on the surface of the proposed structured packing were determined. An optimal range of rational flow rates for more intense cooling of exhaust gases is proposed. It was discovered that the range of optimum flow rates may be extended if the surface of the packing element is pre-wetted. The way of increasing the rate of effective interfacial surface area for gas-liquid contact per unit volume of the packing of the scrubber is presented.

  7. Design of artificial neural networks using a genetic algorithm to predict collection efficiency in venturi scrubbers.

    Science.gov (United States)

    Taheri, Mahboobeh; Mohebbi, Ali

    2008-08-30

    In this study, a new approach for the auto-design of neural networks, based on a genetic algorithm (GA), has been used to predict collection efficiency in venturi scrubbers. The experimental input data, including particle diameter, throat gas velocity, liquid to gas flow rate ratio, throat hydraulic diameter, pressure drop across the venturi scrubber and collection efficiency as an output, have been used to create a GA-artificial neural network (ANN) model. The testing results from the model are in good agreement with the experimental data. Comparison of the results of the GA optimized ANN model with the results from the trial-and-error calibrated ANN model indicates that the GA-ANN model is more efficient. Finally, the effects of operating parameters such as liquid to gas flow rate ratio, throat gas velocity, and particle diameter on collection efficiency were determined.

  8. Experimental and theoretical investigation of droplet dispersion in venturi scrubbers with axial liquid injection

    Energy Technology Data Exchange (ETDEWEB)

    Mokhtarian, N.; Talaei, A.; Karimikhosroabadi, M. [Islamic Azad University, Shahreza Branch, Shahreza (Iran); Sadeghi, F. [Chemical Engineering Department, University of Isfahan, Isfahan (Iran); Talaie, M.R.

    2009-05-15

    Droplet dispersion in a Venturi scrubber with axial liquid injection was investigated both experimentally and theoretically. The main objective of this study was to develop a mathematical model to predict droplet dispersion in a Venturi scrubber with axial liquid injection. The effects of the Peclet number and droplet size distribution on droplet dispersion were studied using the developed model. Sampling of the droplets was carried out, isokinetically, in 16 positions at the end of the throat section. The experimental data were used to find the parameters of the developed model, such as the Peclet number. From the results of this study, it was found that the Peclet number was not constant across the cross section of the scrubber channel. In order to achieve a better agreement between the results of the model and the experimental data, it was required to consider Peclet number variations across the Venturi channel. It was also revealed that the parameter representing the width of the Rosin-Rammler distribution of droplet size could not be considered constant and it was influenced significantly by the operating parameters such as liquid flow rate and gas velocity. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  9. Parameters influencing the aerosol capture performance of the Submerged-Bed Scrubber

    International Nuclear Information System (INIS)

    Ruecker, C.M.; Scott, P.A.

    1987-04-01

    The Submerged-Bed Scrubber (SBS) is a novel air cleaning device that has been investigated by Pacific Northwest Laboratory (PNL) for scrubbing off gases from liquid-fed ceramic melters used to vitrify high-level waste (HLW). The concept for the SBS was originally conceived at Hanford for emergency venting of a reactor containment building. The SBS was adapted for use as a quenching scrubber at PNL because it can cool the hot melter off gas as well as remove over 90% of the airborne particles, thus meeting the minimum particulate decontamination factor (DF) of 10 required of a primary scrubber. The experiments in this study showed that the submicron aerosol DF for the SBS can exceed 100 under certain conditions. A conventional device, the ejector-venturi scrubber (EVS), has been previously used in this application. The EVS also adequately cools the hot gases from the melter while exhibiting aerosol removal DFs in the range of 5 to 30. In addition to achieving higher DFs than the EVS, however, the SBS has the advantage of being a passive system, better suited to the remote environment of an HLW processing system. The objective of this study was to characterize the performance of the SBS and to improve the aerosol capture efficiency by modifying the operating procedure or the design. A partial factorial experimental matrix was completed to determine the main effects of aerosol solubility, inlet off-gas temperature, inlet off-gas flow rate, steam-to-air ratio, bed diameter and packing diameter on the particulate removal efficiency of the SBS. Several additional experiments were conducted to measure the influence of the inlet aerosol concentration and scrubbing-water concentration on aerosol-removal performance. 33 refs., 17 figs., 14 tabs

  10. The CO{sub 2} capture performance of a high-intensity vortex spray scrubber

    Energy Technology Data Exchange (ETDEWEB)

    Javed, K.H.; Mahmud, T.; Purba, E. [University of Leeds, Leeds (United Kingdom)

    2010-08-15

    The present study focuses on the enhancement of CO{sub 2} capture efficiency using a high-intensity vortex spray scrubber by imparting swirl to the gas flow, which has the ability to augment the rates of heat and mass transfer. Experimental investigations into the reactive absorption of CO{sub 2} from a mixture of air-CO{sub 2} into an aqueous solution of NaOH in a laboratory-scale counter-current spray scrubber have been carried out. The mass transfer characteristics, in terms of the overall gas phase mass transfer coefficient (K{sub g}a) were investigated for both the swirling and the non-swirling (axial) gas flows through the scrubber in order to quantify the effect of swirl. The effects of the gas/liquid flow rates, flow arrangements, scrubber height and spray nozzle type on the CO{sub 2} capture performance were examined. For both the axial and the swirling flows, the K{sub g}a increases initially with increasing gas flow rate up to a certain limit, beyond which it becomes essentially constant, whereas the K{sub g}a increases continuously with the liquid flow rate within the measured range. The counter-current gas-droplets flow provides higher mass transfer rates compared with those in co-current flow. The K{sub g}a deceases with the increase in the tower height. The spray nozzle producing finer droplets provides enhanced mass transfer rates. It is found that imparting swirl in the gas flow enhances the K(g)a up to around 49% compared with that in axial flows.

  11. Analysis of Liquid Fraction in Venturi Scrubber by E-E Method Using CFX

    OpenAIRE

    Majid Ali; Yan Changqi; Sun Zhongning; Wang Jianjun; Gu HaiFeng

    2012-01-01

    In this research, the distribution of liquid fraction in cylindrical venturi scrubber is analyzed in ANSYS CFX by Eulerian-Eulerian regime. Liquid gaps allow the aerosols to escape from the venturi scrubber. Therefore, it is vital to investigate the liquid fraction in venturi scrubber at different operating condition. The mesh model is developed in ANSYS ICEM and simulation is conducted in ANSYS CFX. k- ε turbulence model is used for simulation of two phase flow in venturi scrubber. The analy...

  12. Efficient particulate scrubber for glass melter off-gas

    International Nuclear Information System (INIS)

    Wright, G.T.

    1983-01-01

    Operation of joule-heated, continuous slurry-fed melters has demonstrated that off-gas aerosols are generated by entrainment of feed slurry and vaporization of volatile species from the melt. Effective off-gas stream decontamination for these aerosols can be obtained by utilizing a suitably designed and operated wet scrubber system. Results are presented for performance tests conducted with an air aspirating-type venturi scrubber processing a simulated melter off-gas aerosol. Mass overall removal efficiencies ranged from 99.5 to 99.8%. Details of the testing program and applications for melter off-gas system design are discussed

  13. Cost effective treatment for wet FGD scrubber bleedoff

    Energy Technology Data Exchange (ETDEWEB)

    Janecek, K.F. [EIMCO Process Equipment Company, Salt Lake City, UT (United States); Kim, J.Y. [Samkook Corporation, Seoul (Korea, Democratic People`s Republic of)

    1994-12-31

    The dewatering of scrubber bleedoff gypsum is a thoroughly proven technology, whether for production of wallboard grade gypsum or environmentally responsible land fill. Careful review of the technology options will show which one is the most effective for the specific plant site. Likewise, a recipe for wastewater treatment for heavy metals removal can be found that will meet local regulatory limits. EIMCO has worldwide experience in FGD gypsum sludge dewatering and wastewater treatment. Contacting EIMCO can be the most important step toward a practical cost effective system for handling FGD scrubber bleed slurries.

  14. CASE STUDY CRITIQUE; UPPER CLINCH CASE STUDY

    Science.gov (United States)

    Case study critique: Upper Clinch case study (from Research on Methods for Integrating Ecological Economics and Ecological Risk Assessment: A Trade-off Weighted Index Approach to Integrating Economics and Ecological Risk Assessment). This critique answers the questions: 1) does ...

  15. Performance estimation of a Venturi scrubber using a computational model for capturing dust particles with liquid spray

    Energy Technology Data Exchange (ETDEWEB)

    Pak, S.I. [National Fusion Research Center, 52 Eoeun-dong, Yuseong-gu, Daejeon 305-333 (Korea, Republic of)]. E-mail: paksunil@dreamwiz.com; Chang, K.S. [Department of Aerospace Engineering, KAIST, Daejeon (Korea, Republic of)]. E-mail: kschang@kaist.ac.kr

    2006-12-01

    A Venturi scrubber has dispersed three-phase flow of gas, dust, and liquid. Atomization of a liquid jet and interaction between the phases has a large effect on the performance of Venturi scrubbers. In this study, a computational model for the interactive three-phase flow in a Venturi scrubber has been developed to estimate pressure drop and collection efficiency. The Eulerian-Lagrangian method is used to solve the model numerically. Gas flow is solved using the Eulerian approach by using the Navier-Stokes equations, and the motion of dust and liquid droplets, described by the Basset-Boussinesq-Oseen (B-B-O) equation, is solved using the Lagrangian approach. This model includes interaction between gas and droplets, atomization of a liquid jet, droplet deformation, breakup and collision of droplets, and capture of dust by droplets. A circular Pease-Anthony Venturi scrubber was simulated numerically with this new model. The numerical results were compared with earlier experimental data for pressure drop and collection efficiency, and gave good agreements.

  16. Introducing a new formula based on an artificial neural network for prediction of droplet size in venturi scrubbers

    Directory of Open Access Journals (Sweden)

    A. Sharifi

    2012-09-01

    Full Text Available Droplet size is a fundamental parameter for Venturi scrubber performance. For many years, the correlations proposed by Nukiyama and Tanasawa (1938 and Boll et al. (1974 were used for calculating mean droplet size in Venturi scrubbers with limited operating parameters. This study proposes an alternative approach on the basis of artificial neural networks (ANNs to determine the mean droplet size in Venturi scrubbers, in a wide range of operating parameters. Experimental data were used to design the ANNs. A neural network was trained based on the liquid to gas ratio (L/G and throat gas velocity (Vgth, as input parameters, and the Sauter mean diameter (D32 as the desired parameter. The back-propagation learning algorithms were used in the network and the best approach was found. A new formula for the prediction of D32 using the weights of the network was then generated. This formula predicts mean droplet size in Venturi scrubbers more accurately than the correlations of Boll et al. (1974 and Nukiyama and Tanasawa (1938. The Average Absolute Percent Deviation (AAPD of our formula and the Boll et al. and Nukiyama and Tanasawa correlations for the full ranges of experimental data are 26.04%, 40.19% and 32.99%, respectively.

  17. Performance estimation of a Venturi scrubber using a computational model for capturing dust particles with liquid spray

    International Nuclear Information System (INIS)

    Pak, S.I.; Chang, K.S.

    2006-01-01

    A Venturi scrubber has dispersed three-phase flow of gas, dust, and liquid. Atomization of a liquid jet and interaction between the phases has a large effect on the performance of Venturi scrubbers. In this study, a computational model for the interactive three-phase flow in a Venturi scrubber has been developed to estimate pressure drop and collection efficiency. The Eulerian-Lagrangian method is used to solve the model numerically. Gas flow is solved using the Eulerian approach by using the Navier-Stokes equations, and the motion of dust and liquid droplets, described by the Basset-Boussinesq-Oseen (B-B-O) equation, is solved using the Lagrangian approach. This model includes interaction between gas and droplets, atomization of a liquid jet, droplet deformation, breakup and collision of droplets, and capture of dust by droplets. A circular Pease-Anthony Venturi scrubber was simulated numerically with this new model. The numerical results were compared with earlier experimental data for pressure drop and collection efficiency, and gave good agreements

  18. Performance estimation of a Venturi scrubber using a computational model for capturing dust particles with liquid spray.

    Science.gov (United States)

    Pak, S I; Chang, K S

    2006-12-01

    A Venturi scrubber has dispersed three-phase flow of gas, dust, and liquid. Atomization of a liquid jet and interaction between the phases has a large effect on the performance of Venturi scrubbers. In this study, a computational model for the interactive three-phase flow in a Venturi scrubber has been developed to estimate pressure drop and collection efficiency. The Eulerian-Lagrangian method is used to solve the model numerically. Gas flow is solved using the Eulerian approach by using the Navier-Stokes equations, and the motion of dust and liquid droplets, described by the Basset-Boussinesq-Oseen (B-B-O) equation, is solved using the Lagrangian approach. This model includes interaction between gas and droplets, atomization of a liquid jet, droplet deformation, breakup and collision of droplets, and capture of dust by droplets. A circular Pease-Anthony Venturi scrubber was simulated numerically with this new model. The numerical results were compared with earlier experimental data for pressure drop and collection efficiency, and gave good agreements.

  19. A conceptual study of the filtration equipment arrangement in CFVS system

    International Nuclear Information System (INIS)

    Kim, Hyun-Soo; Lee, Jong- Wook; Kim, Won-Seok

    2014-01-01

    Containment Filtered Venting System (CFVS) is installed in nuclear power plant to protect the integrity of containment against the over pressurization and removal of fission product which are aerosol, vapor and gaseous forms release from the fuel into the containment. CFVS has filtering process in two step. In step one, the multi-venturi scrubber for removing aerosol. The venting gas entering the venturi scrubber is injected into a pool of water via a small number of nozzles. Due to the large difference between the velocity of the scrubbing water droplet and gas velocity, aerosols are removed. So the maximum gas velocity of throat is to affect the performance is an important factor in the venturi scrubber. For this reason, composition of distribution pipe and location of scrubber is important, because read to a flow rate different in each venture scrubber. In step two, the metal filter combination additionally equipped with metal fibers and cyclone device. The gas exiting from the pool venturi section contains small amounts of penetrating aerosols as well as small scrubbing water droplets. In case that water droplet moves to metal filter unseparated, filtering performance is rapidly declined. Cyclone is used to prevent the water droplets on the metal filter, separating the droplet including radioactivity which is passed through scrubber by centrifugal force. Therefore separating droplet phase in cyclone is the important thing in aerosol filtering phases although radioactive is not separated. In this study, we found a conceptual design alternative for CFVS performance increasing by reviewing the optimal composition of cyclone and optimal design of distribution pipe with numerical analysis. Numerical analysis was performed with the relationship between the distributions of the flow to the nozzle arrangement in accordance with the size of the distribution pipes, so that the optimal performance of the scrubber can be installed in CFVS. As a result, a high filtration

  20. A conceptual study of the filtration equipment arrangement in CFVS system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun-Soo; Lee, Jong- Wook; Kim, Won-Seok [BHI, Changwon (Korea, Republic of)

    2014-10-15

    Containment Filtered Venting System (CFVS) is installed in nuclear power plant to protect the integrity of containment against the over pressurization and removal of fission product which are aerosol, vapor and gaseous forms release from the fuel into the containment. CFVS has filtering process in two step. In step one, the multi-venturi scrubber for removing aerosol. The venting gas entering the venturi scrubber is injected into a pool of water via a small number of nozzles. Due to the large difference between the velocity of the scrubbing water droplet and gas velocity, aerosols are removed. So the maximum gas velocity of throat is to affect the performance is an important factor in the venturi scrubber. For this reason, composition of distribution pipe and location of scrubber is important, because read to a flow rate different in each venture scrubber. In step two, the metal filter combination additionally equipped with metal fibers and cyclone device. The gas exiting from the pool venturi section contains small amounts of penetrating aerosols as well as small scrubbing water droplets. In case that water droplet moves to metal filter unseparated, filtering performance is rapidly declined. Cyclone is used to prevent the water droplets on the metal filter, separating the droplet including radioactivity which is passed through scrubber by centrifugal force. Therefore separating droplet phase in cyclone is the important thing in aerosol filtering phases although radioactive is not separated. In this study, we found a conceptual design alternative for CFVS performance increasing by reviewing the optimal composition of cyclone and optimal design of distribution pipe with numerical analysis. Numerical analysis was performed with the relationship between the distributions of the flow to the nozzle arrangement in accordance with the size of the distribution pipes, so that the optimal performance of the scrubber can be installed in CFVS. As a result, a high filtration

  1. Westinghouse containment filtered venting system wet scrubber technology

    International Nuclear Information System (INIS)

    Kristensson, S.; Nilsson, P-O.

    2014-01-01

    Following the Fukushima event Westinghouse has further developed and enhanced its filtered containment venting system (FCVS) product line. The filtration efficiency of the proven FILTRA-MVSS system installed at all Swedish NPPs as well as at the Muhelberg plant in Switzerland has been enhanced and a new wet scrubber design, SVEN (Safety Venting), based on the FILTRA-MVSS tradition, developed. To meet increased filtration requirements for organic iodine these two wet scrubber products have been complemented with a zeolite module. The offering of a select choice of products allows for a better adjustment to the specific constraints and needs of each nuclear power station that is planning for the installation of such a system. The FILTRA-MVSS (MVSS=Multi Venturi Scrubber System) is a wet containment filtered vent system that uses multiple venturies to create an interaction between the vent gases and the scrubber media allowing for removal of aerosols and gaseous iodines in a very efficient manner. The FILTRA-MVSS was originally developed to meet stringent requirements on autonomy and maintained filtration efficiency over a wide range of venting conditions. The system was jointly developed in the late 80's by ABB Atom and ABB Flaekt, today Westinghouse and Alstom. Following installations in Sweden and Switzerland the system was further developed by replacement of the gravel-bed moisture separator with a standard demister and by addition of a set of sintered metal fibre filter cartridges placed after the moisture separator step. The system is today offered as a modular steel tank design to simplify installation at site. To reduce complexity and delivery time Westinghouse has developed an alternative design in which the venturi module is replaced by a submerged metal fibre filter cartridges module. This new wet scrubber design, SVEN (patent pending), provides a flexible, compact, and lower weight system, while still preserving and even enhancing the filtration

  2. Project management case studies

    CERN Document Server

    Kerzner, Harold R

    2013-01-01

    A new edition of the most popular book of project management case studies, expanded to include more than 100 cases plus a ""super case"" on the Iridium Project Case studies are an important part of project management education and training. This Fourth Edition of Harold Kerzner''s Project Management Case Studies features a number of new cases covering value measurement in project management. Also included is the well-received ""super case,"" which covers all aspects of project management and may be used as a capstone for a course. This new edition:Contains 100-plus case studies drawn from re

  3. Case Study Research Methodology

    Directory of Open Access Journals (Sweden)

    Mark Widdowson

    2011-01-01

    Full Text Available Commenting on the lack of case studies published in modern psychotherapy publications, the author reviews the strengths of case study methodology and responds to common criticisms, before providing a summary of types of case studies including clinical, experimental and naturalistic. Suggestions are included for developing systematic case studies and brief descriptions are given of a range of research resources relating to outcome and process measures. Examples of a pragmatic case study design and a hermeneutic single-case efficacy design are given and the paper concludes with some ethical considerations and an exhortation to the TA community to engage more widely in case study research.

  4. IODINE REMOVAL EFFICIENCY IN NON-SUBMERGED AND SUBMERGED SELF-PRIMING VENTURI SCRUBBER

    OpenAIRE

    MAJID ALI; YAN CHANGQI; SUN ZHONGNING; GU HAIFENG; WANG JUNLONG; KHURRAM MEHBOOB

    2013-01-01

    The objective of this conducted research is to study the iodine removal efficiency in a self-priming venturi scrubber for submerged and non-submerged operating conditions experimentally and theoretically. The alkaline solution is used as an absorbent, which is prepared by dissolving sodium hydroxide (NaOH) and sodium thiosulphate (Na2S2O3) in water to remove the gaseous iodine (I2) from the gas. Iodine removal efficiency is examined at various gas flow rates and inlet concentrations of iodine...

  5. Performance of iodide vapour absorption in the venturi scrubber working in self-priming mode

    International Nuclear Information System (INIS)

    Zhou, Yanmin; Sun, Zhongning; Gu, Haifeng; Miao, Zhuang

    2016-01-01

    Highlights: • The absorption performance for iodide vapour was studied under different conditions. • A mathematical model was developed to describe the iodide absorption process. • The venturi scrubber can ensure absorption efficiiency and reduce pressure loss. - Abstract: The self-priming venturi scrubber is the key component of filtered containment venting systems for the removal of radioactive products during severe accidents in nuclear power plants. This paper is focused on the absorption performance of iodide vapour in the venturi scrubber, based on experiment and mathematical calculation. The results indicate that the absorption efficiency is closely related to solution flow rate, gas flow rate and temperature, but is not sensitive to iodide inlet concentration. When solution flow rate is low, the absorption efficiency increases rapidly with increasing the solution flow rate, and when the solution is excessive, the absorption efficiency remains around 99% stably; the influence of gas flow rate on absorption efficiency is mainly reflected in the variation of gas and liquid contacting time; when the solution flow rate is low, the increase of gas flow rate will led to an obvious decrease in absorption efficiency; temperature is not important when gas flow rate in constant but becomes effective for improving the absorption efficiency when gas velocity is constant. The proposed mathematical model can predict the iodide absorption process well in the range of experimental conditions. Especially, in the condition of lower gas flow rate and higher solution flow rate, the prediction accuracy is more satisfactory; however the accuracy of prediction will decrease at higher gas flow rates and lower solution flow rates because of neglecting the transverse exchange between gas and liquid phase.

  6. Removing Ambiguities of IP Telephony Traffic Using Protocol Scrubbers

    Directory of Open Access Journals (Sweden)

    Bazara I. A. Barry

    2012-10-01

    Full Text Available Network intrusion detection systems (NIDSs face the serious challenge of attacks such as insertion and evasion attacks that are caused by ambiguous network traffic. Such ambiguity comes as a result of the nature of network traffic which includes protocol implementation variations and errors alongside legitimate network traffic. Moreover, attackers can intentionally introduce further ambiguities in the traffic. Consequently, NIDSs need to be aware of these ambiguities when detection is performed and make sure to differentiate between true attacks and protocol implementation variations or errors; otherwise, detection accuracy can be affected negatively. In this paper we present the design and implementation of tools that are called protocol scrubbers whose main functionality is to remove ambiguities from network traffic before it is presented to the NIDS. The proposed protocol scrubbers are designed for session initiation and data transfer protocols in IP telephony systems. They guarantee that the traffic presented to NIDSs is unambiguous by eliminating ambiguous behaviors of protocols using well-designed protocol state machines, and walking through packet headers of protocols to make sure packets will be interpreted in the desired way by the NIDS. The experimental results shown in this paper demonstrate the good quality and applicability of the introduced scrubbers.

  7. Mercury removal in utility wet scrubber using a chelating agent

    Science.gov (United States)

    Amrhein, Gerald T.

    2001-01-01

    A method for capturing and reducing the mercury content of an industrial flue gas such as that produced in the combustion of a fossil fuel or solid waste adds a chelating agent, such as ethylenediaminetetraacetic acid (EDTA) or other similar compounds like HEDTA, DTPA and/or NTA, to the flue gas being scrubbed in a wet scrubber used in the industrial process. The chelating agent prevents the reduction of oxidized mercury to elemental mercury, thereby increasing the mercury removal efficiency of the wet scrubber. Exemplary tests on inlet and outlet mercury concentration in an industrial flue gas were performed without and with EDTA addition. Without EDTA, mercury removal totaled 42%. With EDTA, mercury removal increased to 71%. The invention may be readily adapted to known wet scrubber systems and it specifically provides for the removal of unwanted mercury both by supplying S.sup.2- ions to convert Hg.sup.2+ ions into mercuric sulfide (HgS) and by supplying a chelating agent to sequester other ions, including but not limited to Fe.sup.2+ ions, which could otherwise induce the unwanted reduction of Hg.sup.2+ to the form, Hg.sup.0.

  8. Wet scrubber technology for tritium confinement at ITER

    Energy Technology Data Exchange (ETDEWEB)

    Perevezentsev, A.N., E-mail: alexander.perevezentsev@iter.org [ITER Organization, CS 90 046, 13067 St Paul lez Durance Cedex (France); Andreev, B.M.; Rozenkevich, M.B.; Pak, Yu.S.; Ovcharov, A.V.; Marunich, S.A. [Mendeleev University of Chemical Technology, 125047 Miusskaya Sq. 9, Moscow (Russian Federation)

    2010-12-15

    Operation of the ITER machine with tritium plasma requires tritium confinement systems to protect workers and the environment. Tritium confinement at ITER is based on multistage approach. The final stage provides tritium confinement in building sectors and consists of building's walls as physical barriers and control of sub-atmospheric pressure in those volumes as a dynamic barrier. The dynamic part of the confinement function shall be provided by safety important components that are available all the time when required. Detritiation of air prior to its release to the environment is based on catalytic conversion of tritium containing gaseous species to water vapour followed by their isotopic exchange with liquid water in scrubber column of packed bed type. Wet scrubber technology has been selected because of its advantages over conventional air detritiation technique based on gas drying by water adsorption. The most important design target of system availability was very difficult to meet with conventional water adsorption driers. This paper presents results of experimental trial for validation of wet scrubber technology application in the ITER tritium confinement system and process evaluation using developed simulation computer code.

  9. Separation of Flue-Gas Scrubber Sludge into Marketable Products

    International Nuclear Information System (INIS)

    1998-01-01

    The reduction of sulfur oxides from high sulfur coal burning utility companies has resulted in the production of huge quantities of wet flue-gas desulfurization scrubber sludge. A typical 400 MW power station burning a coal containing 3.5% sulfur by weight and using a limestone absorbent would produce approximately 177,000 tons (dry weight) of scrubber sludge per year. This brownish colored, finely divided material contains calcium sulfite (CaSO 3 · 1/2 H 2 O), calcium sulfate (CaSO 4 · 2H 2 O), unreacted limestone (CaCO 3 ), and various other impurities such as fly-ash and iron oxide particles. The physical separation of the components of scrubber sludge would result in the re-use of this material. The primary use would be conversion to a highly pure synthetic gypsum. This technical report concentrates on the effect of baffle configuration on the separation of calcium sulfite/sulfate from limestone. The position of the baffles as they related to the feed inlet, and the quantity of the baffles were examined. A clean calcium sulfite/sulfate (less than 2.0% limestone by weight) was achieved with the combination of water-only cyclone and horizontally baffled column

  10. High capacity Venturi scrubber to separate aerosol-borne radioactivity from an air-gas-steam mixture. Final report

    International Nuclear Information System (INIS)

    Mayinger, F.; Glueckert, U.

    1993-01-01

    All German LWR are equipped with devices which in the case of a hypothetic accident permit a filtered depressurization of the containment precluding failure of the latter and minimizing the release of radioactive materials into the environment. To filter the aerosol charged air-steam mixture from the containment also a venturi scrubber is used. It has the great advantage that it can remove safely and over a certain period of time, even without active cooling systems, the after-heat released from the separated radioactive materials. Those separated radioactive materials are trapped in a scrubbing liquid which, in the event of a temporary failure of all active cooling systems, may partly evaporate and thus remove the heat in a completely passive way. The venturi scrubbers conceived earlier by the reactor manufacturer are of a very simple design and not optimized to achieve highest separation degrees. Therefore development work was started to optimize the separation behaviour of the venturi scrubber precisely with regard to submicron aerosols which are to be expected after a core meltdown accident. To achieve this, a special concept of scrubbing liquid addition developed by the contractor, the so-called multistage concept, was applied adapting it to the specific requirements. (orig./HP) [de

  11. Prediction of hydrodynamic characteristics of a venturi scrubber by using CFD simulation

    OpenAIRE

    Manisha Bal; Bhim Charan Meikap

    2017-01-01

    The filtered containment venting system (FCVS) is a safety relevant system, which consists of venturi scrubber and a mesh filter. FCVS needs to be further assessed to improve the existing performance of the venturi scrubber. Therefore, hydrodynamics is an important counter-component needs to be investigated to improve the design of the venturi scrubber. In the present research, Computational Fluid Dynamic (CFD) has been used to predict the hydrodynamic behaviour of a newly designed venturi sc...

  12. Wet Flue Gas Desulfurization Using a New O-Element Design Which Replaces the Venturi Scrubber

    OpenAIRE

    P. Lestinsky; D. Jecha; V. Brummer; P. Stehlik

    2015-01-01

    Scrubbing by a liquid spraying is one of the most effective processes used for removal of fine particles and soluble gas pollutants (such as SO2, HCl, HF) from the flue gas. There are many configurations of scrubbers designed to provide contact between the liquid and gas stream for effectively capturing particles or soluble gas pollutants, such as spray plates, packed bed towers, jet scrubbers, cyclones, vortex and venturi scrubbers. The primary function of venturi scrubb...

  13. Atomization of liquids in a Pease-Anthony Venturi scrubber. Part II. Droplet dispersion.

    Science.gov (United States)

    Gonçalves, J A S; Costa, M A M; Aguiar, M L; Coury, J R

    2004-12-10

    Droplet distribution is of fundamental importance to the performance of a Venturi scrubber. Ensuring good liquid distribution can increase performance at minimal liquid usage. In this study, droplet dispersion in a rectangular Pease-Anthony Venturi scrubber, operating horizontally, was examined both theoretically and experimentally. The Venturi throat cross-section was 24 mm x 35 mm, and the throat length varied from 63 to 140 mm. Liquid was injected through a single orifice (1.0 mm diameter) on the throat wall. This arrangement allowed the study of the influence of jet penetration on droplet distribution. Gas velocity at the throat was 58.3 and 74.6 m/s, and the liquid flow rate was 286, 559 and 853 ml/min. A probe with a 2.7 mm internal diameter was used to isokinetically remove liquid from several positions inside the equipment. It was possible to study liquid distribution close to the injection point. A new model for droplet dispersion, which incorporates the new description of the jet atomization process developed by the present authors in the first article of this series, is proposed and evaluated. The model predicted well the experimental data.

  14. 451 Case studies Cardiac

    African Journals Online (AJOL)

    Marinda

    Case Studies. 29 ... A case of a 26-year-old ASA I physical status male undergoing septoplasty had an abrupt ... myocardial infarction, severe hypertensive crisis, cerebral .... or no formal management is required in an ASA I patient.8 One.

  15. Concept for a cyclonic spray scrubber as a fission product removal system for filtered containment venting

    Energy Technology Data Exchange (ETDEWEB)

    Lebel, Luke S., E-mail: Luke.Lebel@cnl.ca; Piro, Markus H., E-mail: Markus.Piro@cnl.ca; MacCoy, Reilly, E-mail: Reilly.MacCoy@cnl.ca; Clouthier, Anthony, E-mail: Tony.Clouthier@cnl.ca; Chin, Yu-Shan, E-mail: Sammy.Chin@cnl.ca

    2016-02-15

    Graphical abstract: - Highlights: • A new cyclonic spray scrubber concept for filtered containment venting is presented. • Mechanistic particle removal model paired with discrete particle CFD simulations. • Calculations predict that very high decontamination factors can be achieved. - Abstract: The application of a cyclonic spray scrubber as a technology for filtered containment venting is proposed in this paper. This study has paired a mechanistic model for the kinetic particle coagulation of with Euler–Lagrange discrete particle simulations in order to predict particle decontamination factors. The continuous phase behavior has been investigated using computational fluid dynamics simulations together with phase Doppler anemometry measurements. Calculations show that spray scrubbing of radionuclide-bearing aerosols could be very effective, and predict that decontamination factors can be in excess of 10{sup 6} for micron sized particles and excess of 10{sup 3} for submicron particles. In the wake of the accident at the Fukushima Daiichi Nuclear Power Plant, filtered containment venting is being viewed as an increasingly important severe accident mitigation technology. Cyclonic spray scrubbing could be implemented as a passive technology for decontaminating containment gases in an emergency prior to their discharge to the atmosphere, and is a novel approach for this application.

  16. Concept for a cyclonic spray scrubber as a fission product removal system for filtered containment venting

    International Nuclear Information System (INIS)

    Lebel, Luke S.; Piro, Markus H.; MacCoy, Reilly; Clouthier, Anthony; Chin, Yu-Shan

    2016-01-01

    Graphical abstract: - Highlights: • A new cyclonic spray scrubber concept for filtered containment venting is presented. • Mechanistic particle removal model paired with discrete particle CFD simulations. • Calculations predict that very high decontamination factors can be achieved. - Abstract: The application of a cyclonic spray scrubber as a technology for filtered containment venting is proposed in this paper. This study has paired a mechanistic model for the kinetic particle coagulation of with Euler–Lagrange discrete particle simulations in order to predict particle decontamination factors. The continuous phase behavior has been investigated using computational fluid dynamics simulations together with phase Doppler anemometry measurements. Calculations show that spray scrubbing of radionuclide-bearing aerosols could be very effective, and predict that decontamination factors can be in excess of 10 6 for micron sized particles and excess of 10 3 for submicron particles. In the wake of the accident at the Fukushima Daiichi Nuclear Power Plant, filtered containment venting is being viewed as an increasingly important severe accident mitigation technology. Cyclonic spray scrubbing could be implemented as a passive technology for decontaminating containment gases in an emergency prior to their discharge to the atmosphere, and is a novel approach for this application.

  17. Removal of iodomethane from air using a plot-scale corona discharge scrubber

    International Nuclear Information System (INIS)

    Dickson, L.W.; Toft-Hall, A.; Torgerson, D.F.

    1985-12-01

    This report presents the results of a study of the removal of iodomethane from air using a pilot-scale corona discharge scrubber. The removal was measured in the following parameter ranges: bulk air flow, 30 to 350 m 3 /h; initial CH 3 I concentration, 6 to 230 μmol/m 3 ; and discharge current, 0 to 75 mA DC (negative polarity). Approximately five to ten moles of iodomethane are removed per mole of electrons added to the air stream at a discharge voltage of ∼ 10 kV. This removal efficiency suggests that both ion-molecule and radical-molecule reactions may be important in the removal of iodomethane from air in a corona discharge. The results of this pilot-scale demonstration indicate that a corona discharge scrubber would be suitable for removing iodine species from air as part of the emergency filtered-air discharge system of a nuclear reactor. The application of this technology to the control of nitrogen oxide, sulfur dioxide and hydrogen sulfide emissions is being investigated. 15 refs

  18. Development of a submerged gravel scrubber for containment venting applications: summary

    International Nuclear Information System (INIS)

    Hilliard, R.K.; McCormack, J.D.; Postma, A.K.

    1981-01-01

    Although hypothetical core disruptive accidents (HCDAs) are not design basis accidents for breeder reactor plants, extensive assessments of HCDA consequences have been made and design features for providing margins beyond the design base have been considered for future fast reactor plants. One feature proposed for increasing the safety margin is a containment vent and/or purge system which would mitigate the challenge to containment integrity resulting from excessive temperature and pressure or excessive hydrogen. A cleanup system would be required for removal of vented aerosols and condensible vapors to mitigate radiological consequences to the environment. A study is in progress at HEDL to select and develop a suitable air cleaning system for use in potential breeder reactor containment venting applications. A concept was conceived whereby the passiveness and high loading capacity of a water pool scrubber was combined with the high efficiency of a sand and gravel bed. It was termed a Submerged Gravel Scrubber (SGS). A schematic drawing of the concept is shown. The SGS consists of a bed of gravel (or other packing) submerged in a pool of water

  19. Continuous measurements of ammonia, nitrous oxide and methane from air scrubbers at pig housing facilities.

    Science.gov (United States)

    Van der Heyden, C; Brusselman, E; Volcke, E I P; Demeyer, P

    2016-10-01

    Ammonia, largely emitted by agriculture, involves a great risk for eutrophication and acidification leading to biodiversity loss. Air scrubbers are widely applied to reduce ammonia emission from pig and poultry housing facilities, but it is not always clear whether their performance meets the requirements. Besides, there is a growing international concern for the livestock related greenhouse gases methane and nitrous oxide but hardly any data concerning their fate in air scrubbers are available. This contribution presents the results from measurement campaigns conducted at a chemical, a biological and a two-stage biological air scrubber installed at pig housing facilities in Flanders. Ammonia, nitrous oxide and methane at the inlet and outlet of the air scrubbers were monitored on-line during one week using a photoacoustic gas monitor, which allowed to investigate diurnal fluctuations in the removal performance of air scrubbers. Additionally, the homogeneity of the air scrubbers, normally checked by gas detection tubes, was investigated in more detail using the continuous data. The biological air scrubber with extra nitrification tank performed well in terms of ammonia removal (86 ± 6%), while the two-stage air scrubber suffered from nitrifying bacteria inhibition. In the chemical air scrubber the pH was not kept constant, lowering the ammonia removal efficiency. A lower ammonia removal efficiency was found during the day, when the ventilation rate was the highest. Nitrous oxide was produced inside the biological and two-stage scrubber, resulting in an increased outlet concentration of more than 200%. Methane could not be removed in the different air scrubbers because of its low water solubility. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. [Case and studies].

    Science.gov (United States)

    Schubert, András

    2015-11-15

    Case studies and case reports form an important and ever growing part of scientific and scholarly literature. The paper deals with the share and citation rate of these publication types on different fields of research. In general, evidence seems to support the opinion that an excessive number of such publications may negatively influence the impact factor of the journal. In the literature of scientometrics, case studies (at least the presence of the term "case study" in the titles of the papers) have a moderate share, but their citation rate is practically equal to that of other publication types.

  1. Ammonia scrubber testing during IDMS SRAT and SME processing. Revision 1

    International Nuclear Information System (INIS)

    Lambert, D.P.

    1995-01-01

    This report summarizes results of the Integrated DWPF (Defense Waste Processing Facility) Melter System (IDMS) ammonia scrubber testing during the PX-7 run (the 7th IDMS run with a Purex type sludge). Operation of the ammonia scrubber during IDMS Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) processing has been completed. The ammonia scrubber was successful in removing ammonia from the vapor stream to achieve NH3 concentrations far below the 10 ppM vapor exist design basis during SRAT processing. However, during SME processing, vapor NH3 concentrations as high as 450 ppM were measured exiting the scrubber. Problems during the SRAT and SME testing were vapor bypassing the scrubber and inefficient scrubbing of the ammonia at the end of the SME cycle (50% removal efficiency; 99.9% is design basis efficiency)

  2. Numerical Simulation of Flow Behavior within a Venturi Scrubber

    Directory of Open Access Journals (Sweden)

    M. M. Toledo-Melchor

    2014-01-01

    Full Text Available The present work details the three-dimensional numerical simulation of single-phase and two-phase flow (air-water in a venturi scrubber with an inlet and throat diameters of 250 and 122.5 mm, respectively. The dimensions and operating parameters correspond to industrial applications. The mass flow rate conditions were 0.483 kg/s, 0.736 kg/s, 0.861 kg/s, and 0.987 kg/s for the gas only simulation; the mass flow rate for the liquid was 0.013 kg/s and 0.038 kg/s. The gas flow was simulated in five geometries with different converging and diverging angles while the two-phase flow was only simulated for one geometry. The results obtained were validated with experimental data obtained by other researchers. The results show that the pressure drop depends significantly on the gas flow rate and that water flow rate does not have significant effects neither on the pressure drop nor on the fluid maximum velocity within the scrubber.

  3. Evaluation of the NH3 removal efficiency of an acid packed bed scrubber using two methods: a case study in a pig facillity

    NARCIS (Netherlands)

    Estellés, F.; Melse, R.W.; Ogink, N.W.M.; Calvet, S.

    2011-01-01

    The use of air cleaning systems to reduce ammonia emissions from animal houses is increasing. These systems are normally used in order to comply with local or national regulations of ammonia emission. Therefore, accurate determination of the proportion of ammonia being removed by these systems is

  4. Septic Systems Case Studies

    Science.gov (United States)

    A collection of septic systems case studies to help community planners, elected officials, health department staff, state officials, and interested citizens explore alternatives for managing their decentralized wastewater treatment systems.

  5. HYDROGEOLOGIC CASE STUDIES

    Science.gov (United States)

    Hydrogeology is the foundation of subsurface site characterization for evaluations of monitored natural attenuation (MNA). Three case studies are presented. Examples of the potentially detrimental effects of drilling additives on ground-water samples from monitoring wells are d...

  6. A Psychobiographical Case Study

    African Journals Online (AJOL)

    man, and cancer fighter. This psychobiographical case study entailed a psychosocial-historical ... does not draw more attention as a research method, as this approach has .... of the applied Levinsonian theory to the life of Jobs against the ...

  7. Qualitative Case Study Guidelines

    Science.gov (United States)

    2013-11-01

    Introduction to Sociological Methods. 2nd ed. New York, McGraw-Hill 14. Denzin , N. K. and Lincoln , Y. S. (2011) The SAGE Handbook of Qualitative...The Art of Science. In: Denzin , N. K. and Lincoln , Y. S. (eds.) Handbook of Qualitative Research. Thousand Oaks, Sage 19. GAO (1990) Case Study...Rinehart & Winston 39. Stake, R. E. (1994) Case Studies. In: Denzin , N. K. and Lincoln , Y. S. (eds.) Handbook of Qualitative Research. Thousand Oaks, Sage

  8. An efficient venturi scrubber system to remove submicron particles in exhaust gas.

    Science.gov (United States)

    Tsai, Chuen-Jinn; Lin, Chia-Hung; Wang, Yu-Min; Hunag, Cheng-Hsiung; Li, Shou-Nan; Wu, Zong-Xue; Wang, Feng-Cai

    2005-03-01

    An efficient venturi scrubber system making use of heterogeneous nucleation and condensational growth of particles was designed and tested to remove fine particles from the exhaust of a local scrubber where residual SiH4 gas was abated and lots of fine SiO2 particles were generated. In front of the venturi scrubber, normal-temperature fine-water mist mixes with high-temperature exhaust gas to cool it to the saturation temperature, allowing submicron particles to grow into micron sizes. The grown particles are then scrubbed efficiently in the venturi scrubber. Test results show that the present venturi scrubber system is effective for removing submicron particles. For SiO2 particles greater than 0.1microm, the removal efficiency is greater than 80-90%, depending on particle concentration. The corresponding pressure drop is relatively low. For example, the pressure drop of the venturi scrubber is approximately 15.4 +/- 2.4 cm H2O when the liquid-to-gas ratio is 1.50 L/m3. A theoretical calculation has been conducted to simulate particle growth process and the removal efficiency of the venturi scrubber. The theoretical results agree with the experimental data reasonably well when SiO2 particle diameter is greater than 0.1 microm.

  9. Numerical simulation of two-phase flow behavior in Venturi scrubber by interface tracking method

    Energy Technology Data Exchange (ETDEWEB)

    Horiguchi, Naoki, E-mail: s1430215@u.tsukuba.ac.jp [Japan Atomic Energy Agency, 2-4, Shirakata, Tokai-mura, Naka-gun, Ibaraki 319-1195 (Japan); University of Tsukuba, 1-1-1, Tennodai, Tsukuba, Ibaraki, 305-8577 (Japan); Yoshida, Hiroyuki [Japan Atomic Energy Agency, 2-4, Shirakata, Tokai-mura, Naka-gun, Ibaraki 319-1195 (Japan); Abe, Yutaka [University of Tsukuba, 1-1-1, Tennodai, Tsukuba, Ibaraki, 305-8577 (Japan)

    2016-12-15

    Highlights: • Self-priming occur because of pressure balance between inside and outside of throat is confirmed. • VS has similar flow with a Venturi tube except of disturbance and burble flow is considered. • Some of atomization simulated are validated qualitatively by comparison with previous studies. - Abstract: From the viewpoint of protecting a containment vessel of light water reactor and suppressing the diffusion of radioactive materials from a light water reactor, it is important to develop the device which allows a filtered venting of contaminated high pressure gas. In the filtered venting system that used in European reactors, so called Multi Venturi scrubbers System is used to realize filtered venting without any power supply. This system is able to define to be composed of Venturi scrubbers (VS) and a bubble column. In the VS, scrubbing of contaminated gas is promoted by both gas releases through the submerged VS and gas-liquid contact with splay flow formed by liquid suctioned through a hole provided by the pressure difference between inner and outer regions of a throat part of the VS. However, the scrubbing mechanism of the self-priming VS including effects of gas mass flow rate and shape of the VS are understood insufficiently in the previous studies. Therefore, we started numerical and experimental study to understand the detailed two-phase flow behavior in the VS. In this paper, to understand the VS operation characteristics for the filtered venting, we performed numerical simulations of two-phase flow behavior in the VS. In the first step of this study, we perform numerical simulations of supersonic flow by the TPFIT to validate the applicability of the TPFIT for high velocity flow like flow in the VS. In the second step, numerical simulation of two-phase flow behavior in the VS including self-priming phenomena. As the results, dispersed flow in the VS was reproduced in the numerical simulation, as same as the visualization experiments.

  10. Numerical simulation of two-phase flow behavior in Venturi scrubber by interface tracking method

    International Nuclear Information System (INIS)

    Horiguchi, Naoki; Yoshida, Hiroyuki; Abe, Yutaka

    2016-01-01

    Highlights: • Self-priming occur because of pressure balance between inside and outside of throat is confirmed. • VS has similar flow with a Venturi tube except of disturbance and burble flow is considered. • Some of atomization simulated are validated qualitatively by comparison with previous studies. - Abstract: From the viewpoint of protecting a containment vessel of light water reactor and suppressing the diffusion of radioactive materials from a light water reactor, it is important to develop the device which allows a filtered venting of contaminated high pressure gas. In the filtered venting system that used in European reactors, so called Multi Venturi scrubbers System is used to realize filtered venting without any power supply. This system is able to define to be composed of Venturi scrubbers (VS) and a bubble column. In the VS, scrubbing of contaminated gas is promoted by both gas releases through the submerged VS and gas-liquid contact with splay flow formed by liquid suctioned through a hole provided by the pressure difference between inner and outer regions of a throat part of the VS. However, the scrubbing mechanism of the self-priming VS including effects of gas mass flow rate and shape of the VS are understood insufficiently in the previous studies. Therefore, we started numerical and experimental study to understand the detailed two-phase flow behavior in the VS. In this paper, to understand the VS operation characteristics for the filtered venting, we performed numerical simulations of two-phase flow behavior in the VS. In the first step of this study, we perform numerical simulations of supersonic flow by the TPFIT to validate the applicability of the TPFIT for high velocity flow like flow in the VS. In the second step, numerical simulation of two-phase flow behavior in the VS including self-priming phenomena. As the results, dispersed flow in the VS was reproduced in the numerical simulation, as same as the visualization experiments.

  11. Numerical Simulation of Flow Behavior within a Venturi Scrubber

    OpenAIRE

    M. M. Toledo-Melchor; C. del C. Gutiérrez-Torres; J. A. Jiménez-Bernal; J. G. Barbosa-Saldaña; S. A. Martínez-Delgadillo; H. R. Mollinedo-Ponce de León; A. Yoguéz-Seoane; A. Alonzo-García

    2014-01-01

    The present work details the three-dimensional numerical simulation of single-phase and two-phase flow (air-water) in a venturi scrubber with an inlet and throat diameters of 250 and 122.5 mm, respectively. The dimensions and operating parameters correspond to industrial applications. The mass flow rate conditions were 0.483 kg/s, 0.736 kg/s, 0.861 kg/s, and 0.987 kg/s for the gas only simulation; the mass flow rate for the liquid was 0.013 kg/s and 0.038 kg/s. The gas flow was simulated in f...

  12. Relationship between self-priming and hydraulic behavior in Venturi Scrubber

    International Nuclear Information System (INIS)

    Horiguchi, Naoki; Kaneko, Akiko; Abe, Yutaka; Yoshida, Hiroyuki

    2014-01-01

    As revealed by Fukushima Daiichi nuclear disaster, countermeasures against severe accident in nuclear power plants are an urgent need. In particular, from the viewpoint of protecting a containment and suppressing the diffusion of radioactive materials, it is important to develop the device which allows a filtered venting of contaminated high pressure gas. In the filtered venting system that used in European reactors, so called Multi Venturi Scrubbers System is used to realize filtered venting without any power supply (Lindau, 1988) (Rust, et al., 1995). The system operates with any power supply and high pressure gas filled in the containment. This system is able to define to be composed of Venturi Scrubbers (VS) and a bubble column. In the VS, scrubbing of contaminated gas is promoted by both gas releases through a submerged VS and gas-liquid contact with splay flow formed by liquid suctioned through a hole provided by the pressure difference between inner and outer parts of a throat part of the VS. This type of the VS is called self-priming ones. However, the scrubbing mechanism of the self-priming VS including effects of gas mass flow rate and shape of the VS are understood insufficiently in the previous studies. In this study, to understand the VS operation characteristics for the filtered venting, we discussed the mechanisms of the self-priming phenomena and the hydraulic behavior in the VS. In this paper, we conducted a visualized observation of the hydraulic behavior in the VS and measured liquid flow rate of the self-priming. As a result, it is shown that there is the possibility that the VS decontamination performance falls low level with no self-priming. (author)

  13. Objectivist case study research

    DEFF Research Database (Denmark)

    Ridder, Hanne Mette Ochsner; Fachner, Jörg

    2016-01-01

    be achieved through the use of objectivist case study research. The strength of the case study design is that it allows for uncovering or suggesting causal relationships in real-life settings through an intensive and rich collection of data. According to Hilliard (1993), the opposite applies for extensive......In order to comprehend the impact of music therapy or music therapy processes, a researcher might look for an approach where the topic under investigation can be understood within a broader context. This calls for a rich inclusion of data and consequently a limited number of participants and may...... designs, in which a small amount of data is gathered on a large number of subjects. With the richness of data, the intensive design is ―the primary pragmatic reason for engaging in single-case or small N research‖ (p. 374) and for working from an idiographic rather than a nomothetic perspective....

  14. Case Studies - Cervical Cancer

    Centers for Disease Control (CDC) Podcasts

    Dr. Alan Waxman, a professor of obstetrics and gynecology at the University of New Mexico and chair of the American College of Obstetricians and Gynecologists (ACOG) committee for the underserved, talks about several case studies for cervical cancer screening and management.

  15. Nuclear forensics case studies

    International Nuclear Information System (INIS)

    Fedchenko, Vitaly

    2016-01-01

    The objective of this presentation is to share three case studies from the Institute of Transuranium Elements (ITU) which describe the application of nuclear forensics to events where nuclear and other radioactive material was found to be out of regulatory control

  16. SCA12 case study

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Genetics; Volume 88; Issue 1. Utilizing linkage disequilibrium information from Indian Genome Variation Database for mapping mutations: SCA12 case study. Samira Bahl Ikhlak Ahmed The Indian Genome Variation Consortium Mitali Mukerji. Research Article Volume 88 Issue 1 April 2009 pp 55- ...

  17. national Case study

    African Journals Online (AJOL)

    This national case study reports on the development of a national network, ... system under the new policy), tends to be limited by content on problems and ... 20 credit programme; and within two Post Graduate Certificate of Education contexts, ...... descriptive with an issues focus (empirical) towards awareness production to.

  18. Comparing environmental impact of air scrubbers for ammonia abatement at pig houses

    NARCIS (Netherlands)

    Vries, De Jerke W.; Melse, Roland W.

    2017-01-01

    Intensive livestock production involves environmental emissions and impacts, including emission of greenhouse gases and ammonia leading to climate change and terrestrial acidification. Ammonia emission from animal housing systems can be reduced by introducing air scrubbers for cleaning the

  19. Design procedure for sizing a submerged-bed scrubber for airborne particulate removal

    International Nuclear Information System (INIS)

    Ruecker, C.M.; Scott, P.A.

    1987-04-01

    Performance correlations to design and operate the submerged bed scrubber were developed for various applications. Structural design procedure outlined in this report focuses on off-gas scrubbing for HLW vitrification applications; however, the method is appropriate for other applications

  20. Venturi/Vortex Scrubber Technology for Controlling/Recycling Chromium Electroplating Emissions

    National Research Council Canada - National Science Library

    Hay, K

    1999-01-01

    ...) above the plating tank. Venturi/Vortex Scrubber Technology (VVST) was designed to control chromium electroplating emissions by collecting the gas bubbles before they burst at the solution's surface...

  1. MRI case studies

    International Nuclear Information System (INIS)

    Huggett, S.; Barber, J.

    1989-01-01

    Three case studies are presented to show the value of magnetic resonance imaging used in conjunction with other imaging techniques. In each case MRI proved a vital diagnostic tool and superior to CT in showing firstly the haematoma in a patient with aphasia and right-sided weakness, secondly the size of the disc herniation in a patient with severe leg and ankle pains and thirdly the existence of a metastatic lesion in a patient with a previous history of breast cancer. 11 figs

  2. Value-Added Products From FGD Sulfite-Rich Scrubber Materials

    Energy Technology Data Exchange (ETDEWEB)

    Vivak M. Malhotra

    2006-09-30

    Massive quantities of sulfite-rich flue gas desulfurization (FGD) scrubber materials are produced every year in the USA. In fact, at present, the production of wet sulfite-rich scrubber cake outstrips the production of wet sulfate-rich scrubber cake by about 6 million tons per year. However, most of the utilization focus has centered on FGD gypsum. Therefore, we have recently initiated research on developing new strategies for the economical, but environmentally-sound, utilization of sulfite-rich scrubber material. In this exploratory project (Phase I), we attempted to ascertain whether it is feasible to develop reconstituted wood replacement products from sulfite-rich scrubber material. In pursuit of this goal, we characterized two different wet sulfite-rich scrubber materials, obtained from two power plants burning Midwestern coal, for their suitability for the development of value-added products. The overall strategy adopted was to fabricate composites where the largest ingredient was scrubber material with additional crop materials as additives. Our results suggested that it may be feasible to develop composites with flexural strength as high as 40 MPa (5800 psi) without the addition of external polymers. We also attempted to develop load-bearing composites from scrubber material, natural fibers, and phenolic polymer. The polymer-to-solid ratio was limited to {le} 0.4. The formulated composites showed flexural strengths as high as 73 MPa (10,585 psi). We plan to harness the research outcomes from Phase I to develop parameters required to upscale our value-added products in Phase II.

  3. Droplet dispersion angle measurements on a Pease-Antony Venturi scrubber

    OpenAIRE

    Puentes,N. A. G.; Guerra,V. G.; Coury,J. R.; Gonçalves,J. A. S.

    2012-01-01

    A Pease-Anthony Venturi scrubber is a gas cleaning device that uses liquid, injected in the equipment as jets, to remove contaminants from the gas. The liquid jet is atomized into droplets, which are dispersed throughout the equipment due to the turbulence. The performance of the scrubber is affected by the spatial distribution of the droplets. Although CFD models have been used to predict the droplet dispersion, these models are expensive. Alternatively, the concept of "jet spreading angle" ...

  4. Tracking Legionella in air generated from a biological treatment plant: a case study of the outbreak of legionellosis in Norway

    Science.gov (United States)

    Blatny, Janet M.; Olsen, Jaran S.; Andreassen, Øyvind; Waagen, Viggo; Reif, Bjørn Anders P.

    2011-05-01

    Two outbreaks of legionellosis occurred in the Sarpsborg/Fredrikstad region southeast of Norway in 2005 and 2008 where more than 60 exposed individuals were infected and 10 case patients died. The air scrubber at Borregaard, a wood-based chemical factory, was identified as the outbreak source. High concentration levels of Legionella species, including the etiological agent L. pneumophila SG1 was found in the aeration ponds, which belongs to Borregaard's biological treatment plant. Results showed that these ponds were able to generate Legionella-containing aerosols that were transported by the wind as such aerosols were measured up to 200 meters downwind of the pond. Our studies did not detect L. pneumophila SG1 isolates, only L. pneumophila SG4 during the air sampling measurement campaign. Furthermore, the operational conditions of the air scrubber proved to be harsh for Legionella growth as the outbreak L. pneumophila strains were not able to grow at 45ºC and pH8 (conditions during the outbreaks). These results, together, lead us to suggest that the aeration pond should be regarded as the primary amplifier and disseminator of Legionella and L. pneumophila and thereby most likely being the outbreak source.

  5. Value-Added Products from FGD Sulfite-Rich Scrubber Materials

    Energy Technology Data Exchange (ETDEWEB)

    Vivak Malhotra

    2010-01-31

    According to the American Coal Ash Association, about 29.25 million tons of flue gas desulfurization (FGD) byproducts were produced in the USA in 2003. Out of 29.25 million tons, 17.35 million tons were sulfite-rich scrubber materials. At present, unlike its cousin FGD gypsum, the prospect for effective utilization of sulfite-rich scrubber materials is not bright. In fact, almost 16.9 million tons are leftover every year. In our pursuit to mitigate the liability of sulfite-rich FGD scrubber materials' disposal, we are attempting to develop value-added products that can commercially compete. More specifically, for this Innovative Concept Phase I project, we have the following objectives: to characterize the sulfite-rich scrubber material for toxic metals; to optimize the co-blending and processing of scrubber material and natural byproducts; to formulate and develop structural composites from sulfite-rich scrubber material; and to evaluate the composites' mechanical properties and compare them with current products on the market. After successfully demonstrating the viability of our research, a more comprehensive approach will be proposed to take these value-added materials to fruition.

  6. Case study - Czechoslovakia

    International Nuclear Information System (INIS)

    Kovar, P.

    1986-01-01

    In the lecture Case Study - Czechoslovakia with the sub-title 'Unified System of Personnel Preparation for Nuclear Programme in Czechoslovakia' the actual status and the current experience of NPP personnel training and preparation in Czechoslovakia are introduced. The above mentioned training system is presented and demonstrated by the story of a proxy person who is going to become shift engineer in a nuclear power plant in Czechoslovakia. (orig./HP)

  7. Case Studies - Cervical Cancer

    Centers for Disease Control (CDC) Podcasts

    2010-10-15

    Dr. Alan Waxman, a professor of obstetrics and gynecology at the University of New Mexico and chair of the American College of Obstetricians and Gynecologists (ACOG) committee for the underserved, talks about several case studies for cervical cancer screening and management.  Created: 10/15/2010 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP), Division of Cancer Prevention and Control (DCPC).   Date Released: 6/9/2010.

  8. Case Study - Alpha

    Directory of Open Access Journals (Sweden)

    Stephen Leybourne

    2016-11-01

    Full Text Available This case study was developed from an actual scenario by Dr. Steve Leybourne of Boston University.  The case documents the historical evolution of an organization, and has been used successfully in courses dealing with organizational and cultural change, and the utilization of ‘soft skills’ in project-based management. This is a short case, ideal for classroom use and discussion.  The issues are easily accessible to students, and there is a single wide ranging question that allows for the inclusion of many issues surrounding strategic decision-making, and behavioural and cultural change. Alpha was one of the earlier companies in the USA to invest in large, edge-of-town superstores, with plentiful free vehicle parking, selling food and related household products. Alpha was created in the 1950s as a subsidiary of a major publicly quoted retail group.  It started business by opening a string of very large discount stores in converted industrial and warehouse premises in the south of the United States. In the early days shoppers were offered a limited range of very competitively priced products. When Alpha went public in 1981 it was the fourth largest food retailer in the US, selling an ever-widening range of food and non-food products.  Its success continued to be based on high volume, low margins and good value for money, under the slogan of ‘Alpha Price.’

  9. NOx trade. Case studies

    International Nuclear Information System (INIS)

    Jantzen, J.

    2002-01-01

    Some of the questions with respect to the trade of nitrogen oxides that businesses in the Netherlands have to deal with are dealt with: should a business buy or sell rights for NOx emission; which measures must be taken to reduce NOx emission; how much must be invested; and how to deal with uncertainties with regard to prices. Simulations were carried out with the MOSES model to find the answers to those questions. Results of some case studies are presented, focusing on the chemical sector in the Netherlands. Finally, the financial (dis)advantages of NOx trade and the related uncertainties for a single enterprise are discussed [nl

  10. OBSESSIONS: CASE REPORT STUDY

    Directory of Open Access Journals (Sweden)

    Miloš Židanik

    2004-01-01

    Full Text Available Background. Obsessions are one of the most refractory psychiatric disorders. The therapeutic guidelines include a psychopharmacotherapy and the use of behavioural and supportive psychotherapy.Methods. This case report study presents a patient with a homicide obsessions at the forefront and narcissistic personality disorder in background. The use of analytical oriented psychotherapy, which helped to resolve axis-1 symptoms, is described.Conclusions. In the therapy of patients it is important to have the knowledge about the national therapeutic guidelines and critical distance toward them as well. Which therapy to use should be decided by the individual patient’s needs.

  11. Cost decreases in environmental technology. Evidence from four case studies

    Energy Technology Data Exchange (ETDEWEB)

    Oosterhuis, F. [Instituut for Environmental Studies, Vrije Universiteit VU, Amsterdam (Netherlands)

    2007-07-15

    The cost of a new technology tends to decrease as its uptake grows, and environmental technology is no exception to this general rule. Factors that can bring about such cost reductions include economies of scale, 'learning-by-doing', incremental technological improvements, and growing competition. In preparing environmental policies, the potential for future cost reductions is often disregarded. The present study aims to provide some additional empirical evidence on the cost decreases in environmental technology and the factors that lie behind them. To this end, four exemplary case studies have been selected. The first case (NOx emission abatement by Selective Catalytic Reduction (SCR)), shows a wide variety in cost estimates, without a clear trend. This is even true for the costs of a fairly homogeneous type of investment (SCR in coal fired power plants). Nevertheless, it is clear that an important cost decrease has been achieved by prolonging the lifetime of the catalyst, which is one of the main cost components in SCR. In the second case (NH3 emission abatement by chemical air scrubbers in pig farming) there is not yet sufficient experience with the technology to draw conclusions on the development of costs. However, it is already clear that economizing on the capacity of the system can contribute to important cost savings. Three-way catalytic converters in cars have shown significant price decreases following their large scale introduction on the European market in the early 1990s. Probably economies of scale have played an important role in this case, as the size of the market made mass production possible. To some extent, cost reductions may also be attributed to improvements such as the need for less materials (e.g. platinum). Furthermore, the performance of catalytic converters has improved, implying that the cost per unit of emission reduction has decreased even more than the cost of the device itself. Market prices of Compact Fluorescent Lamps

  12. Ecological effects of scrubber water discharge on coastal plankton: Potential synergistic effects of contaminants reduce survival and feeding of the copepod Acartia tonsa.

    Science.gov (United States)

    Koski, Marja; Stedmon, Colin; Trapp, Stefan

    2017-08-01

    To meet the oncoming requirements for lower sulphur emissions, shipping companies can install scrubbers where the exhaust is sprayed with seawater and subsequently discharged to the sea. The discharge water has a pH around 3 and contains elevated concentrations of vanadium, nickel, lead and hydrocarbons. We investigated 1) the threshold concentrations of scrubber discharge water for survival, feeding and reproduction of the copepod Acartia tonsa, 2) whether the effects depend on the exposure route and 3) whether exposure to discharge water can be detected in field-collected organisms. A direct exposure to discharge water increased adult copepod mortality and reduced feeding at metal concentrations which were orders of magnitude lower than the lethal concentrations in previous single-metal studies. In contrast, reproduction was not influenced by dietary uptake of contaminants. Scrubber water constituents could have synergistic effects on plankton productivity and bioaccumulation of metals, although the effects will depend on their dilution in the marine environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Development of evaluation method for hydraulic behavior in Venturi scrubber for filtered venting

    International Nuclear Information System (INIS)

    Horiguchi, Naoki; Nakao, Yasuhiro; Kaneko, Akiko; Abe, Yutaka; Yoshida, Hiroyuki

    2016-01-01

    Filtered venting systems have been installed to restart Nuclear Power Plants in Japan after Fukushima Daiichi Nuclear Disaster. Venturi scrubber is main component of one of the systems. To evaluate decontamination performance of the Venturi scrubber for filtered venting, mechanistic evaluation method for hydrodynamic behavior is important. In this paper, our objective is to develop the method. As approaches, we conducted experimental observation under adiabatic (air-water) condition, developed a numerical simulation code with one-dimensional two-fluid model and made verification and validation by comparison between these results in terms of superficial gas, static pressure, superficial liquid velocity, droplet ratio and droplet diameter in Venturi scrubber. As results, we observed the hydrodynamic behavior, developed the code and confirmed that it has capability to evaluate the parameters with following accuracy, superficial gas velocity with +30%, static pressure in throat part with +-10%, superficial liquid velocity with +-80%, droplet diameter with +-30% and droplet ratio with -50%. (author)

  14. Goiania incident case study

    International Nuclear Information System (INIS)

    Petterson, J.S.

    1988-06-01

    The reasons for wanting to document this case study and present the findings are simple. According to USDOE technical risk assessments (and our own initial work on the Hanford socioeconomic study), the likelihood of a major accident involving exposure to radioactive materials in the process of site characterization, construction, operation, and closure of a high-level waste repository is extremely remote. Most would agree, however, that there is a relatively high probability that a minor accident involving radiological contamination will occur sometime during the lifetime of the repository -- for example, during transport, at an MRS site or at the permanent site itself during repacking and deposition. Thus, one of the major concerns of the Yucca Mountain Socioeconomic Study is the potential impact of a relatively minor radiation-related accident. A large number of potential impact of a relatively minor radiation-related accident. A large number of potential accident scenarios have been under consideration (such as a transportation or other surface accident which results in a significant decline in tourism, the number of conventions, or the selection of Nevada as a retirement residence). The results of the work in Goiania make it clear, however, that such a significant shift in established social patterns and trends is not likely to occur as a direct outcome of a single nuclear-related accident (even, perhaps, a relatively major one), but rather, are likely to occur as a result of the enduring social interpretations of such an accident -- that is, as a result of the process of understanding, communicating, and socially sustaining a particular set of associations with respect to the initial incident

  15. FMCT verification: Case studies

    International Nuclear Information System (INIS)

    Hui Zhang

    2001-01-01

    Full text: How to manage the trade-off between the need for transparency and the concern about the disclosure of sensitive information would be a key issue during the negotiations of FMCT verification provision. This paper will explore the general concerns on FMCT verification; and demonstrate what verification measures might be applied to those reprocessing and enrichment plants. A primary goal of an FMCT will be to have the five declared nuclear weapon states and the three that operate unsafeguarded nuclear facilities become parties. One focus in negotiating the FMCT will be verification. Appropriate verification measures should be applied in each case. Most importantly, FMCT verification would focus, in the first instance, on these states' fissile material production facilities. After the FMCT enters into force, all these facilities should be declared. Some would continue operating to produce civil nuclear power or to produce fissile material for non- explosive military uses. The verification measures necessary for these operating facilities would be essentially IAEA safeguards, as currently being applied to non-nuclear weapon states under the NPT. However, some production facilities would be declared and shut down. Thus, one important task of the FMCT verifications will be to confirm the status of these closed facilities. As case studies, this paper will focus on the verification of those shutdown facilities. The FMCT verification system for former military facilities would have to differ in some ways from traditional IAEA safeguards. For example, there could be concerns about the potential loss of sensitive information at these facilities or at collocated facilities. Eventually, some safeguards measures such as environmental sampling might be seen as too intrusive. Thus, effective but less intrusive verification measures may be needed. Some sensitive nuclear facilities would be subject for the first time to international inspections, which could raise concerns

  16. Size reduction of ammonia scrubbers for pig and poultry houses: Use of conditional bypass vent at high air loading rates

    NARCIS (Netherlands)

    Melse, R.W.; Wagenberg, van A.V.; Mosquera, J.

    2006-01-01

    In The Netherlands, both acid and biological air scrubbers are used for removal of ammonia from exhaust air at pig and poultry houses. Current regulations require that scrubbers are dimensioned for treating the maximum airflow rate that may occur, so on average these systems are overdimensioned and

  17. Removal of particulate matter (PM10) by air scrubbers at livestock facilities: results of an on-farm monitoring program.

    NARCIS (Netherlands)

    Melse, R.W.; Hofschreuder, P.; Ogink, N.W.M.

    2012-01-01

    Air scrubbers are commonly used for removal of ammonia and odor from exhaust air of animal houses in the Netherlands. In addition, air scrubbers remove a part of the particulate matter. In this article, the results of an on-farm monitoring are presented in which PM10 removal was monitored at 24

  18. Multi-Pollutant and One-Stage Scrubbers for Removal of Ammonia, Odor, and Particulate Matter from Animal House Exhaust Air

    OpenAIRE

    Ogink, N.W.M.; Melse, R.W.; Mosquera Losada, J.

    2008-01-01

    In several European countries, acid scrubbers and bio-scrubbers are off-the-shelf techniques for effective removal of ammonia from exhaust air from animal houses and, to a lesser extent, for odor. The number of operating air scrubbers at livestock operations in the Netherlands in 2008 is estimated to clean the air of approximately 10 percent of the pigs produced nationwide. Currently, a new generation of so-called multi-pollutant air scrubbers are developed for intensive livestock production ...

  19. Inconel alloy 625 clad steel for application in wet scrubber systems

    International Nuclear Information System (INIS)

    Morse, S.L.; Shoemaker, L.E.

    1984-01-01

    Test panels from INCONEL 625 clad plate were successfully installed in two wet flue gas scrubber systems. In one system INCONEL 625 clad plate was located in the roof section of the absorber just ahead of the outlet ducting. The test plates, including weld seams, showed no signs to corrosion after six months of exposure. In the other scrubber test plates located in the outlet duct of an I.D. fan house, in the stack lining, and in the absorber quench area were unattacked after nine months

  20. Atomization of liquids in a Pease-Anthony Venturi scrubber. Part I. Jet dynamics.

    Science.gov (United States)

    Gonçalves, J A S; Costa, M A M; Henrique, P R; Coury, J R

    2003-02-28

    Jet dynamics, in particular jet penetration, is an important design parameter affecting the collection efficiency of Venturi scrubbers. A mathematical description of the trajectory, break-up and penetration of liquid jets initially transversal to a subsonic gas stream is presented. Experimental data obtained from a laboratory scale Venturi scrubber, operated with liquid injected into the throat through a single orifice, jet velocities between 6.07 and 15.9 m/s, and throat gas velocities between 58.3 and 74.9 m/s, is presented and used to validate the model.

  1. Applicability of numerical simulation code TPFIT to two-phase flow in Venturi scrubber

    International Nuclear Information System (INIS)

    Horiguchi, Naoki; Kanagawa, Tetsuya; Kaneko, Akiko; Abe, Yutaka; Yoshida, Hiroyuki

    2015-01-01

    As one of the filtered venting devices for light water reactor, Venturi scrubber can operate with effective decontamination efficiency because dispersed flow is formed in the Venturi scrubber by pressure difference between inside and outside of holes for liquid suction. Droplet diameter and its distribution in cross-section area are important for the decontamination. However, they are changed by hydraulic behavior of suctioned liquid until atomized, and kinds of atomization phenomena. In this report, to understand the hydraulic behavior of the liquid in detail for the filtered venting, we performed visualized observation experimentally and numerical simulation by TPFIT. Then the numerical simulation result was validated by the experimental data. (author)

  2. Performance of a Venturi scrubber in the removal of fine powder from a confined gas stream

    OpenAIRE

    Costa, Maria Angélica Martins; Ribeiro, Ana Paula Rodrigues Alves; Tognetti, Érica Rodrigues; Aguiar, Mônica Lopes; Gonçalves, José Antônio Silveira; Coury, José Renato

    2005-01-01

    Experimental results on the performance of a laboratory scale rectangular Venturi scrubber in the removal of fine mineral particles from a confined air stream are presented, and a new correlation is proposed and evaluated. The scrubber was operated with air velocities in the throat varying from 58 m/s to 75 m/s and liquid flow rates varying from 280 ml/min to 900 ml/min. Liquid was injected as a jet emerging from a 1.0 mm orifice at the throat. Results for dust collection grade efficiency var...

  3. Performance of a Venturi scrubber in the removal of fine powder from a confined gas stream

    Directory of Open Access Journals (Sweden)

    Maria Angélica Martins Costa

    2005-06-01

    Full Text Available Experimental results on the performance of a laboratory scale rectangular Venturi scrubber in the removal of fine mineral particles from a confined air stream are presented, and a new correlation is proposed and evaluated. The scrubber was operated with air velocities in the throat varying from 58 m/s to 75 m/s and liquid flow rates varying from 280 ml/min to 900 ml/min. Liquid was injected as a jet emerging from a 1.0 mm orifice at the throat. Results for dust collection grade efficiency varied from 87% to 98% for particles from 0.1 µm to 2.0 µm.

  4. Final report on case studies

    DEFF Research Database (Denmark)

    Ljungberg, Daniel; McKelvey, Maureen; Lassen, Astrid Heidemann

    2012-01-01

    Case study as a research design means investigating a single or multiple instance(s) or setting(s) (i.e. a case) and its entire context to explain a phenomenon and its processes. This is achieved through detailed understanding, usually comprised of multiple sources of information. In this way, case...... studies attempt to provide as a complete an understanding of a (complex) phenomenon as possible. Within the AEGIS project, survey and case study research are complementary. They are complementary in the sense that the former can provide more generalizable evidence on a phenomenon in terms of cross......-sectional data, while the latter can provide more in-depth (qualitative) understanding on specific issues. In systematically examining the case studies, however, this report goes beyond a typical single case study. Here we provide a synthesis of 86 case studies. Multiple case studies, following similar focus...

  5. 425 Case study

    African Journals Online (AJOL)

    Marinda

    Anaesthesia management of acute aortic dissection type B in ... of a severe, constant abdominal and chest pain radiating to the ... Continuous spinal anaesthesia was induced ... these cases surgical intervention is critical.1,2 Type B of AAD is.

  6. Evaluation of Decontamination Factor of Aerosol in Pool Scrubber according to Bubble Shape and Size

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Hyun Joung; Ha, Kwang Soon; Jang, Dong Soon [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    The scrubbing pool could play an important role in the wet type FCVS because a large amount of aerosol is captured in the water pool. The pool scrubbing phenomena have been modelled and embedded in several computer codes, such as SPARC (Suppression Pool Aerosol Removal Code), BUSCA (BUbble Scrubbing Algorithm) and SUPRA (Suppression Pool Retention Analysis). These codes aim at simulating the pool scrubbing process and estimating the decontamination factors (DFs) of the radioactive aerosol and iodine gas in the water pool, which is defined as the ratio of initial mass of the specific radioactive material to final massy after passing through the water pool. The pool scrubbing models were reviewed and an aerosol scrubbing code has been prepared to calculate decontamination factor through the pool. The developed code has been verified using the experimental results and parametric studies the decontamination factor according to bubble shape and size. To evaluate the decontamination factor more accurate whole pool scrubber phenomena, the code was improved to consider the variety shape and size of bubbles. The decontamination factor were largely evaluated in ellipsoid bubble rather than in sphere bubble. The pool scrubbing models will be enhanced to apply more various model such as aerosol condensation of hygroscopic. And, it is need to experiment to measure to bubble shape and size distribution in pool to improve bubble model.

  7. Multi-Pollutant and One-Stage Scrubbers for Removal of Ammonia, Odor, and Particulate Matter from Animal House Exhaust Air

    NARCIS (Netherlands)

    Ogink, N.W.M.; Melse, R.W.; Mosquera Losada, J.

    2008-01-01

    In several European countries, acid scrubbers and bio-scrubbers are off-the-shelf techniques for effective removal of ammonia from exhaust air from animal houses and, to a lesser extent, for odor. The number of operating air scrubbers at livestock operations in the Netherlands in 2008 is estimated

  8. Use of a heated graphite scrubber as a means of reducing interferences in UV-absorbance measurements of atmospheric ozone

    Directory of Open Access Journals (Sweden)

    A. A. Turnipseed

    2017-06-01

    Full Text Available A new solid-phase scrubber for use in conventional ozone (O3 photometers was investigated as a means of reducing interferences from other UV-absorbing species and water vapor. It was found that when heated to 100–130 °C, a tubular graphite scrubber efficiently removed up to 500 ppb ozone and ozone monitors using the heated graphite scrubber were found to be less susceptible to interferences from water vapor, mercury vapor, and aromatic volatile organic compounds (VOCs compared to conventional metal oxide scrubbers. Ambient measurements from a graphite scrubber-equipped photometer and a co-located Federal equivalent method (FEM ozone analyzer showed excellent agreement over 38 days of measurements and indicated no loss in the scrubber's ability to remove ozone when operated at 130 °C. The use of a heated graphite scrubber was found to reduce the interference from mercury vapor to ≤ 3 % of that obtained using a packed-bed Hopcalite scrubber. For a series of substituted aromatic compounds (ranging in volatility and absorption cross section at 253.7 nm, the graphite scrubber was observed to consistently exhibit reduced levels of interference, typically by factors of 2.5 to 20 less than with Hopcalite. Conventional solid-phase scrubbers also exhibited complex VOC adsorption and desorption characteristics that were dependent upon the relative humidity (RH, volatility of the VOC, and the available surface area of the scrubber. This complex behavior involving humidity is avoided by use of a heated graphite scrubber. These results suggest that heated graphite scrubbers could be substituted in most ozone photometers as a means of reducing interferences from other UV-absorbing species found in the atmosphere. This could be particularly important in ozone monitoring for compliance with the United States (U.S. Clean Air Act or for use in VOC-rich environments such as in smog chambers and monitoring indoor air quality.

  9. Removal of nitrogen by Algal Turf Scrubber Technology in recirculating aquaculture system

    NARCIS (Netherlands)

    Valeta, J.; Verdegem, M.C.J.

    2015-01-01

    Ongoing research in recirculation aquaculture focuses on evaluating and improving the purification potential of different types of filters. Algal Turf Scrubber (ATS) are special as they combine sedimentation and biofiltration. An ATS was subjected to high nutrient loads of catfish effluent to

  10. Development of water scrubbers to reduce fine dust emission from poultry houses

    NARCIS (Netherlands)

    Ogink, N.W.M.; Aarnink, A.J.A.; Harn, van J.; Melse, R.W.; Cambra-Lopez, M.

    2010-01-01

    Poultry housings with litter are a major contributor to fine dust emissions (PM10/PM2.5) in the Netherlands. Poultry producers are in need of dust mitigation options that are cost effective. Such an option could be provided by adequately designed water scrubbers. Catchment of dust particles by water

  11. Dust captures effectiveness of scrubber systems on mechanical miners operating in larger roadways.

    CSIR Research Space (South Africa)

    Hole, BJ

    1998-03-01

    Full Text Available The project was directed towards bord and pillar working by mechanised miners operating in larger section roadways, where the problem of scrubber capture tends to be greatest owing to the limited size of the zone of influence around exhaust...

  12. Emotion, Engagement, and Case Studies

    Science.gov (United States)

    Herreid, Clyde Freeman; Terry, David R.; Lemons, Paula; Armstrong, Norris; Brickman, Peggy; Ribbens, Eric

    2014-01-01

    Three college faculty taught large general biology classes using case studies and personal response systems (clickers). Each instructor taught the same eight cases in two different sections, except the questions within the cases differed. In one section the questions were lower order (LO) factual inquiries, and in the other they were largely…

  13. Shipping and the environment: Smokestack emissions, scrubbers and unregulated oceanic consequences

    Directory of Open Access Journals (Sweden)

    David R. Turner

    2017-08-01

    Full Text Available While shipping has long been recognised as a very carbon-efficient transport medium, there is an increasing focus on its broader environmental consequences. The International Maritime Organisation is responsible for the regulation of ship emissions arising from fuel combustion. Their current regulations are, however, much less strict than those applying to land-based transport within the European Union. Five different groups of pollutant emission from ship smokestacks are addressed in this paper: sulphur oxides, nitrogen oxides, particulate matter, organic matter and metals. The reduction of sulphur oxide emissions into the atmosphere using scrubber technology adds another dimension to the discussion, as this approach results in focused discharge of some pollutants to the surface water. A scoping calculation shows that an open-loop scrubber on a medium-sized ship could discharge more copper and zinc daily to the surface water than the ship’s antifouling paint. The use of antifouling paint in the European Union is subject to a prior risk assessment, but scrubber discharges are not subject to any such risk assessment. This situation presents a problem from the perspective of the Marine Strategy Framework Directive, as environmental monitoring programmes in some coastal areas of the Baltic Sea have shown that levels of both copper and zinc exceed environmental quality standards. To fulfil the Marine Strategy Framework Directive requirements and achieve Good Environmental Status, having knowledge of the magnitude of different anthropogenic pressures is important. Metal inputs from open-loop scrubbers have been largely neglected until now: some metals have the potential to serve as tracers for monitoring scrubber discharges.

  14. Building theories from case study research: the progressive case study

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2006-01-01

    Meredith (1998) argues for more case and field research studies in the field of operations management. Based on a literature review, we discuss several existing approaches to case studies and their characteristics. These approaches include; the Grounded Theory approach which proposes no prior

  15. Theory Testing Using Case Studies

    DEFF Research Database (Denmark)

    Møller, Ann-Kristina Løkke; Dissing Sørensen, Pernille

    2014-01-01

    The appropriateness of case studies as a tool for theory testing is still a controversial issue, and discussions about the weaknesses of such research designs have previously taken precedence over those about its strengths. The purpose of the paper is to examine and revive the approach of theory...... testing using case studies, including the associated research goal, analysis, and generalisability. We argue that research designs for theory testing using case studies differ from theorybuilding case study research designs because different research projects serve different purposes and follow different...... research paths....

  16. Theory testing using case studies

    DEFF Research Database (Denmark)

    Dissing Sørensen, Pernille; Løkke Nielsen, Ann-Kristina

    2006-01-01

    on the strengths of theory-testing case studies. We specify research paths associated with theory testing in case studies and present a coherent argument for the logic of theoretical development and refinement using case studies. We emphasize different uses of rival explanations and their implications for research...... design. Finally, we discuss the epistemological logic, i.e., the value to larger research programmes, of such studies and, following Lakatos, conclude that the value of theory-testing case studies lies beyond naïve falsification and in their contribution to developing research programmes in a progressive......Case studies may have different research goals. One such goal is the testing of small-scale and middle-range theories. Theory testing refers to the critical examination, observation, and evaluation of the 'why' and 'how' of a specified phenomenon in a particular setting. In this paper, we focus...

  17. Fuzzy-Set Case Studies

    Science.gov (United States)

    Mikkelsen, Kim Sass

    2017-01-01

    Contemporary case studies rely on verbal arguments and set theory to build or evaluate theoretical claims. While existing procedures excel in the use of qualitative information (information about kind), they ignore quantitative information (information about degree) at central points of the analysis. Effectively, contemporary case studies rely on…

  18. Methodology for the case studies

    NARCIS (Netherlands)

    Smits, M.J.W.; Woltjer, G.B.

    2017-01-01

    This document is about the methodology and selection of the case studies. It is meant as a guideline for the case studies, and together with the other reports in this work package can be a source of inform ation for policy officers, interest groups and researchers evaluating or performing impact

  19. Case study - Argentina

    International Nuclear Information System (INIS)

    Diaz, E.

    1986-01-01

    Antecedents and experience of nuclear activities in Argentina; the Atomic Energy Commission (CNEA). First development and research activities. Research reactors and radioisotopes plants. Health physics and safety regulations. - Feasibility studies for the first nuclear power plant. Awarding the first plant CNA I (Atucha I). Relevant data related to the different project stages. Plant performance. - Feasibility study for the second nuclear power plant. Awarding the second plant CNE (Central Nuclear Embalse). Relevant data related to established targets. Differences compared with the first station targets. Local participation. Plant performance. (orig./GL)

  20. Case Study: Shiraz Women

    Directory of Open Access Journals (Sweden)

    Bijan Khajehnoori

    2011-04-01

    Full Text Available This study investigated the relationship between lifestyle which seems as a scale of globalization process with body image. Required data was collected by systematic random sampling among 508 women in Shiraz. Based on existing theories and studies theoretical framework has constituted based on Giddens theory. Six hypotheses have been established. For collecting information, survey method and self reported questionnaire were used. In data analysis and explanation, multiple regression and unilateral dispersion analyses were used. The result showed that among effective factors on body image, modern musical lifestyle, religious' lifestyle, leisure lifestyle and participative lifestyle explained 23 percent of variations of body image. Among these variables, only religious lifestyle had negative relationship with body image and other variables had positive relationship with dependant variable.

  1. Centrifugal compressor case study

    Energy Technology Data Exchange (ETDEWEB)

    Eckert, B.

    2010-10-15

    Three centrifugal compressors at a pipeline station were retrofitted with higher head impellers in 2008. The owners of the station experienced vibration problems over the following 2 years that caused transmitter and position failures that were assumed to be flow-induced pulsations. A vibration and pulsation analysis indicated that the shell mode piping vibration excited by the blade pass pulsation was responsible for the failures. This study outlined factors that contributed to the vibration problem. Interferences between the compressor and shell mode piping natural frequencies were predicted, and potential excitation sources were examined. The study demonstrated how centrifugal vibration analyses can be used during the design phase to avoid costly adjustments. Recommendations included the addition of stiffeners to alter the shell modes, and the addition of constrained layer damping material to reduce resonant responses. 2 refs., 1 tab., 12 figs.

  2. Case study: Tourism marketing

    OpenAIRE

    Kennell, James

    2014-01-01

    Tourism can be a challenging subject for students because it is both dynamic and susceptible to economic turbulence and shifts in trends. Tourism: A Modern Synthesis is an essential textbook for tourism students looking for a clear and comprehensive introduction to their studies which helps overcome these challenges. The authors apply a strong business approach to the subject reflecting developments in the teaching and content of modern courses and the text covers both key principles and cont...

  3. Toluene removal by oxidation reaction in spray wet scrubber: experimental, modeling and optimization

    Directory of Open Access Journals (Sweden)

    Roumporn Nikom

    2006-11-01

    Full Text Available Toluene, an important volatile organic compound (VOC, is used in many kinds of industries, such as painting, printing, coating, and petrochemical industries. The emission of toluene causes serious air pollution, odor problem, flammability problem and affects human health. This paper proposes the removal of toluene from waste air using a spray wet scrubber combining the absorption and oxidation reaction. Aqueous sodium hypochlorite (NaOCl solution was used as the scrubbing liquid in the system. NaOCl, the strongest oxidative agent, presents an effective toluene removal. As the scrubbed toluene is reacted, recirculation of the scrubbing liquid could be operated with a constant removal efficiency throughout the operting time. The investigated variables affecting the removal efficiency were air flow rate, inlet toluene concentration, NaOCl concentration, scrubbing liquid flow rate and size of spray nozzle. Influence of the scrubbing parameters was experimentally studied to develop a mathematical model of the toluene removal efficiency. The removal model reveals that the increase of scrubbing liquid flow rate, toluene concentration, and NaOCl concentration together with the decrease of air flow rate and size of spray nozzle can increase the toluene removal efficiency. Optimization problem with an objective function and constraints was set to provide the maximum toluene removal efficiency and solved by Matlab optimization toolbox. The optimization constraints were formed from the mathematical model and process limitation. The solution of the optimization was an air flow rate of 100 m3/h, toluene concentration of 1500 ppm, NaOCl concentration of 0.02 mol/l, NaOCl solution feed rate of 0.8 m3/h, and spray nozzle size of 0.5 mm. Solution of the optimization gave the highest toluene removal efficiency of 91.7%.

  4. Case Study: Derechos Digitales

    Directory of Open Access Journals (Sweden)

    Cameron Neylon

    2017-10-01

    Full Text Available Derechos Digitales is a Latin American advocacy and research network focussed on freedom on the internet, privacy and copyright reform. For the pilot project a specific IDRC funded project was the notional focus of study. However in practice the effort for considering data sharing was aimed at being organisation wide. The organisation already shares reports and other resources (particularly images and infographics by default. While open data was described as being “in the DNA of the organisation” there was little practice across the network of sharing preliminary and in-process materials. Some aspects of data collection on research projects, particularly to do with copyright and legal issues, have significant privacy issues and as the organisation focuses on privacy as one of its advocacy areas this is taken very seriously. Many materials from research projects are not placed online at all. Derechos Digitales run distributed projects and this creates challenges for consistent management. Alongside this the main contact at DD changed during the course of the pilot. This exchange exemplified the challenges of maintaining organisational systems and awareness through a personnel change.

  5. Case study: Khoramdareh County

    Directory of Open Access Journals (Sweden)

    Vahid Riahi Riahi

    2016-10-01

    Full Text Available Environmental sustainability of rural settlements based on a systematic viewpoint may be defined as a realization of sustainable development in different social, economic and environmental aspects of rural areas. Achieving this goal requires that we pay more attention to effective elements and factors through a set of sustainability indices. This research was meant to analyze sustainable factors of rural settlement in three dimensions: environmental, social and economic context using multi-criteria decision analysis and explanation of the relationships between its active and effective factors in the rural area of the Khorramdarreh County in the province of Zanjan. The research method used is the descriptive analytic approach. Data from 287 households were sampled randomly from a total of 1143 households in the four villages including: Rahmat Abad, Alvand, Baghdareh and, Sukhariz (out of 15 villages in the Khorramdarreh County. In the process of doing this research and after calculating the weights, the difference in the sustainability of environmental, social, economic and physical aspects in rural areas of this county have been determined. Data was collected using library and field research through questionnaires. Data analysis was performed by the One-Sample t Test and the Vikur and path analysis techniques, using statistical software SPSS. The findings show that environmental sustainability in the study area is half desirable. Among the different aspects of environmental sustainability, the most effective factors are physical, economic, social and environmental aspects, respectively. Little attention of policy-making –system to socio-cultural and environmental aspects, especially in practice, and rapid and unplanned utilization of production resources are the most important factors affecting this situation in two given dimensions. Although, in programmed documents the planning system agents emphasize on the socio-cultural sustainability

  6. Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber

    NARCIS (Netherlands)

    Zhao, Y.; Aarnink, A.J.A.; Xin, H.

    2014-01-01

    High microbial concentrations and emissions associated with livestock houses raise health and environmental concerns. A pilot-scale ultraviolet photocatalytic (UV-PCO) scrubber was tested for its efficacy to inactivate aerosolized Enterococcus faecalis and infectious bursal disease virus (IBDV).

  7. Case studies of uncommon headaches.

    Science.gov (United States)

    Evans, Randolph W

    2006-05-01

    The following interesting and uncommon headache disorders are presented through case studies: exploding head syndrome, hypnic headache, neck-tongue syndrome, "Alice in Wonderland" syndrome, nummular headache, red ear syndrome, burning mouth syndrome, spontaneous intracranial hypotension syndrome, and cardiac cephalalgia.

  8. HYDROGEOLOGIC CASE STUDIES (DENVER PRESENTATION)

    Science.gov (United States)

    Hydrogeology is the foundation of subsurface site characterization for evaluations of monitored natural attenuation (MNA). Three case studies are presented. Examples of the potentially detrimental effects of drilling additives on ground-water samples from monitoring wells are d...

  9. HYDROGEOLOGIC CASE STUDIES (CHICAGO, IL)

    Science.gov (United States)

    Hydrogeology is the foundation of subsurface site characterization for evaluations of monitored natural attenuation (MNA). Three case studies are presented. Examples of the potentially detrimental effects of drilling additives on ground-water samples from monitoring wells are d...

  10. Hydrogeologic Case Studies (Seattle, WA)

    Science.gov (United States)

    Hydrogeology is the foundation of subsurface site characterization for evaluations of monitored natural attenuation (MNA). Three case studies are presented. Examples of the potentially detrimental effects of drilling additives on ground-water samples from monitoring wells are d...

  11. a case study ondo state

    African Journals Online (AJOL)

    user

    the design of a Government Cloud (G-Cloud) network for Ondo State Government which will ... network for a developing economy; a case study of ... France is one of those countries that favour .... Arequipa city. .... Where region 0 = Akure, 1 =.

  12. Development of an Automated Diffusion Scrubber-Conductometry System for Measuring Atmospheric Ammonia

    International Nuclear Information System (INIS)

    Lee, Bok Young; Lee, Chong Keun; Lee, Dong Soo

    2011-01-01

    A semi-continuous and automated method for quantifying atmospheric ammonia at the parts per billion level has been developed. The instrument consists of a high efficiency diffusion scrubber, an electrolytic on-line anion exchange device, and a conductivity detector. Water soluble gases in sampled air diffuse through the porous membrane and are absorbed in an absorbing solution. Interferences are eliminated by using an anion exchange devises. The electrical conductivity of the solution is measured without chromatographic separation. The collection efficiency was over 99%. Over the 0-200 ppbv concentration range, the calibration was linear with r"2 = 0.99. The lower limit of detection was 0.09 ppbv. A parallel analysis of Seoul air over several days using this method and a diffusion scrubber coupled to an ion chromatography system showed acceptable agreement, r"2 = 0.940 (n = 686). This method can be applied for ambient air monitoring of ammonia

  13. Development of an Automated Diffusion Scrubber-Conductometry System for Measuring Atmospheric Ammonia

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Bok Young; Lee, Chong Keun; Lee, Dong Soo [Yonsei University, Seoul (Korea, Republic of)

    2011-06-15

    A semi-continuous and automated method for quantifying atmospheric ammonia at the parts per billion level has been developed. The instrument consists of a high efficiency diffusion scrubber, an electrolytic on-line anion exchange device, and a conductivity detector. Water soluble gases in sampled air diffuse through the porous membrane and are absorbed in an absorbing solution. Interferences are eliminated by using an anion exchange devises. The electrical conductivity of the solution is measured without chromatographic separation. The collection efficiency was over 99%. Over the 0-200 ppbv concentration range, the calibration was linear with r{sup 2} = 0.99. The lower limit of detection was 0.09 ppbv. A parallel analysis of Seoul air over several days using this method and a diffusion scrubber coupled to an ion chromatography system showed acceptable agreement, r{sup 2} = 0.940 (n = 686). This method can be applied for ambient air monitoring of ammonia.

  14. Venturi scrubber with integrated separating column for aerosol precipitation and gas sorption

    International Nuclear Information System (INIS)

    Mayinger, F.; Lehner, M.

    1992-01-01

    A concept for a novel, compact process combination in the form of a Venturi scrubber with integrated separating column was developed. The design of the system is such as to meet the boundary conditions encountered in practice. Comprehensive tests were carried through with this high-performance Venturi scrubber in a wide range of parameters, using the superfine dusts titanium dioxide and zinc oxide as test aerosols. Separating efficiency was found to be excellent, especially for multi-stage spray injection of the scrubbing fluid. Multi-stage spray injection achieves a more favourable pulse exchange between gas and fluid so that pressure losses are relatively low even though loading may be high. A provisional experimental set-up is used for further optimization of separating efficiency and pressure loss. (orig.) [de

  15. Large-scale tests of aqueous scrubber systems for LMFBR vented containment

    International Nuclear Information System (INIS)

    McCormack, J.D.; Hilliard, R.K.; Postma, A.K.

    1980-01-01

    Six large-scale air cleaning tests performed in the Containment Systems Test Facility (CSTF) are described. The test conditions simulated those postulated for hypothetical accidents in an LMFBR involving containment venting to control hydrogen concentration and containment overpressure. Sodium aerosols were generated by continously spraying sodium into air and adding steam and/or carbon dioxide to create the desired Na 2 O 2 , Na 2 CO 3 or NaOH aerosol. Two air cleaning systems were tested: (a) spray quench chamber, educator venturi scrubber and high efficiency fibrous scrubber in series; and (b) the same except with the spray quench chamber eliminated. The gas flow rates ranged up to 0.8 m 3 /s (1700 acfm) at temperatures to 313 0 C (600 0 F). Quantities of aerosol removed from the gas stream ranged up to 700 kg per test. The systems performed very satisfactorily with overall aerosol mass removal efficiencies exceeding 99.9% in each test

  16. Fabrication of remote steam atomized scrubbers for DWPF off-gas system

    International Nuclear Information System (INIS)

    Nielsen, M.G.; Lafferty, J.D.

    1988-01-01

    The defense waste processing facility (DWPF) is being constructed for the purpose of processing high-level waste from sludge to a vitrified borosilicate glass. In the operation of continuous slurry-fed melters, off-gas aerosols are created by entrainment of feed slurries and the vaporization of volatile species from the molten glass mixture. It is necessary to decontaminate these aerosols in order to minimize discharge of airborne radionuclide particulates. A steam atomized scrubber (SAS) has been developed for DWPF which utilizes a patented hydro- sonic system gas scrubbing method. The Hydro-Sonic System utilizes a steam aspirating-type venturi scrubber that requires very precise fabrication tolerances in order to obtain acceptable decontamination factors. In addition to the process-related tolerances, precision mounting and nozzle tolerances are required for remote service at DWPF

  17. Development of the venturi scrubber model for the FILTRA-MVSS system

    International Nuclear Information System (INIS)

    Luangdilok, W.; Epstein, M.; Berger, W.E.; Augustsson, Thomas

    2009-01-01

    The thermal-hydraulic model of the venturi scrubber for the FILTRA-MVSS system was developed. The developed model was then incorporated into the MAAP4 code for performance analysis purposes. The results show that during severe accident conditions where the vent line control valve is used to regulate the flow to the vent line, the scrubbing performance of the venturi can peak at a value of about 5000 in the decontamination factor. For a fixed valve throttling there is a time window where scrubbing is effective. Outside this window the venturi scrubbing is ineffective due to either too high or too low pressure. To optimize the scrubbing performance, it would be necessary (1) to allow a substantial fraction of the high vent flow to bypass the venturi scrubber tubes so that a certain amount of vent flow is always scrubbed as well as (2) to adjust the flow control valve to its optimal position during the containment venting. (author)

  18. Droplet dispersion angle measurements on a Pease-Antony Venturi scrubber

    Directory of Open Access Journals (Sweden)

    N. A. G. Puentes

    2012-03-01

    Full Text Available A Pease-Anthony Venturi scrubber is a gas cleaning device that uses liquid, injected in the equipment as jets, to remove contaminants from the gas. The liquid jet is atomized into droplets, which are dispersed throughout the equipment due to the turbulence. The performance of the scrubber is affected by the spatial distribution of the droplets. Although CFD models have been used to predict the droplet dispersion, these models are expensive. Alternatively, the concept of "jet spreading angle" could be used as a simple and quick way to estimate droplet dispersion. The purpose of this paper is to measure the spreading angle of jets transversally injected into the throat of a Venturi scrubber and correlate it with both gas and jet velocities. The throat gas velocities varied between 59 and 74 m/s and the jet velocity between 3.18 and 19.1 m/s. The angles were measured through image analysis, obtained with high velocity photography. The spreading angle was found to be strongly dependent on jet velocity.

  19. Evaluation of surface dose rate on C-14 scrubber and gas bag

    International Nuclear Information System (INIS)

    Gang, D. W.; Lee, H. S.; Lee, D. H.

    2003-01-01

    In CANDU(Canadian Deuterium Uranium) reactors, purge and discharge of moderator cover gas has been performed via vapor recovery system. The methods employed in C-14 removal are mainly based on reactions of CO 2 with absorber of adsorbent. In order to choose an optimum process, we should consider the characteristics of the process, such as, temperature, pressure, humidity etc. and surface dose rate on C-14 scrubber and gas bag to estimate job-related personnel doses. Assuming that the whole C-14 scrubber was completely replaced after one-cycle operation, and that its C-14 activity for one-cycle operation was 40 mCi, we calculated the surface dose rate at the six points of the C-14 scrubber. This calculation showed that the dose rate on the surface of cartridge was only 1.25μSυ/hγ because of low energy of β ray. It is concluded, therefore, that the cartridge change-out is safe because the operation of C-14 removal system causes only a small increase in dose rate

  20. Teaching Case: Enterprise Architecture Specification Case Study

    Science.gov (United States)

    Steenkamp, Annette Lerine; Alawdah, Amal; Almasri, Osama; Gai, Keke; Khattab, Nidal; Swaby, Carval; Abaas, Ramy

    2013-01-01

    A graduate course in enterprise architecture had a team project component in which a real-world business case, provided by an industry sponsor, formed the basis of the project charter and the architecture statement of work. The paper aims to share the team project experience on developing the architecture specifications based on the business case…

  1. Theory Testing Using Case Studies

    DEFF Research Database (Denmark)

    Sørensen, Pernille Dissing; Løkke, Ann-Kristina

    2006-01-01

    design. Finally, we discuss the epistemological logic, i.e., the value to larger research programmes, of such studies and, following Lakatos, conclude that the value of theory-testing case studies lies beyond naïve falsification and in their contribution to developing research programmes in a progressive...

  2. Case Study of 'moral injury' : Format Dutch Case Studies Project

    NARCIS (Netherlands)

    Korver, Sjaak; Walton, Martin N.; van Loenen, Guus

    2017-01-01

    The case study ‘Moral Injury’ traces care provided by a chaplain in a mental health institution to a former military marksman named Hans. Hans was in care at a specialized unit for military veterans with traumas. He sought contact with a chaplain “to set things right with God” and wanted the

  3. eCompetence Case Studies

    DEFF Research Database (Denmark)

    Jensen, Helle Bækkelund

    2006-01-01

    In this paper we present some details of the processes undertaken in the European eCompetence Initiative. We present two illustrative and representative case studies. The research aims to identify and understand patterns of individual and organisational eCompetence approaches.......In this paper we present some details of the processes undertaken in the European eCompetence Initiative. We present two illustrative and representative case studies. The research aims to identify and understand patterns of individual and organisational eCompetence approaches....

  4. Case Study on Logistics Performance

    Directory of Open Access Journals (Sweden)

    Shahryar Sorooshian

    2013-05-01

    Full Text Available The paper presents research carried out at a medium‐size manufacturing organization in east Asia. The study tries to highlight the importance of supply chain management; specifically, our aim for this study is to understand logistics and performance measurement in the logistics and supply chain, and we include a theoretical discussion of online data collected and a case study of the logistic performance of a real organization. The study also examines the performance of the selected company, identifies the problems and provides recommendations for improvements. This study can be a guide for business advisers and those interested in analysing company performance, especially from a logistics viewpoint. We also suggest the methodology of this case study for those who want to have a better understanding of a business environment before starting their own business, or for benchmarking practice during strategic planning.

  5. BioFleet case studies

    International Nuclear Information System (INIS)

    2007-01-01

    These six case studies examined the use of different biodiesel blends as fuel supply sources for businesses in British Columbia (BC). In the first case study, 6 municipalities participated in a pilot program designed to compare the performance of biodiesel and diesel fuels. Each municipality operated 2 base vehicles running on conventional diesel along with 2 similar vehicles which used biodiesel. Real time emissions tests and analyses of the vehicles using biodiesel were also conducted by 2 of the participating municipalities. All municipalities participating in the study agreed to purchase significant volumes of biodiesel. The second case study described a pilot study conducted by the City of Vancouver's equipment services branch in 2004. As a result of the study, the city now has over 530 types of equipment that use biodiesel. The third case study described a program designed by TSI Terminals in Vancouver to assess the emission reduction impact of using biodiesel at its port facility. Six different pieces of equipment were used to confirm that biodiesel could be used throughout the terminal. Test results confirmed that biodiesel blends could be used to reduce emissions. Overall emissions were reduced by 30 per cent. The fourth case study described a waste renderer that used a fleet of 36 trucks to deliver raw products to its plants. The company made the decision to use only biodiesel for its entire fleet of trucks. Since July 2005, the company has logged over 1.7 million km using biodiesel blends. The fifth case study described a salmon hatchery that switched from diesel to biodiesel in order to reduce emissions. The biodiesel blends are used to fuel the hatchery's 2 diesel generators. The hatchery has reduced emissions of greenhouse gases (GHGs) by an estimated 1800 tonnes annually. The sixth case study described how the Township of Langley has started using biodiesel for its entire fleet of of approximately 250 pieces of equipment. The township has not

  6. Case Studies in Sports Nutrition.

    Science.gov (United States)

    Clark, Nancy

    1988-01-01

    This article presents case studies of two athletes who wanted to affect a change in their body weight in order to enhance athletic performance. Each athlete's problem and the nutrition approach used to solve it are discussed. Caloric values of fast foods are listed. (JL)

  7. Shea case study Burkina Faso

    NARCIS (Netherlands)

    S. Drost (Sarah); J.C.A.C. van Wijk (Jeroen); S.R. Vellema (Sietze)

    2012-01-01

    textabstractThis shea case study is part of a larger Partnerships Resource Centre (PrC) project elaborated in tandem with two Dutch non-governmental organisations (NGOs); ICCO and Oxfam Novib. The endeavour of this ‘action research’ project is to combine the expert knowledge of development

  8. The reflexive case study method

    DEFF Research Database (Denmark)

    Rittenhofer, Iris

    2015-01-01

    This paper extends the international business research on small to medium-sized enterprises (SME) at the nexus of globalization. Based on a conceptual synthesis across disciplines and theoretical perspectives, it offers management research a reflexive method for case study research of postnational...

  9. On-line measurements of liquid carry-over from scrubbers using radioactive tracers

    Energy Technology Data Exchange (ETDEWEB)

    Haugan, A; Hassfjell, S [Institute for Energy Technology, Kjeller (Norway); Finborud, A [Mator, Porsgrunn (Norway)

    2004-07-01

    A method to measure liquid carry-over from scrubbers using gamma-emitting tracers is described and results from field tests at two onshore installations are presented. One water/1,2-ethanediol (MEG) and two hydrocarbon liquid (condensate) tracers have been used in the tests. One of the condensate tracers deposited to some extent inside the process pipe, while the other had a too high vapor pressure. The water/MEG tracer showed no MEG carry-over while the carry-over of MEG was documented to be considerable. (author)

  10. On-line measurements of liquid carry-over from scrubbers using radioactive tracers

    International Nuclear Information System (INIS)

    Haugan, A.; Hassfjell, S.; Finborud, A.

    2004-01-01

    A method to measure liquid carry-over from scrubbers using gamma-emitting tracers is described and results from field tests at two onshore installations are presented. One water/1,2-ethanediol (MEG) and two hydrocarbon liquid (condensate) tracers have been used in the tests. One of the condensate tracers deposited to some extent inside the process pipe, while the other had a too high vapor pressure. The water/MEG tracer showed no MEG carry-over while the carry-over of MEG was documented to be considerable. (author)

  11. Institutional total energy case studies

    Energy Technology Data Exchange (ETDEWEB)

    Wulfinghoff, D.

    1979-07-01

    Profiles of three total energy systems in institutional settings are provided in this report. The plants are those of Franciscan Hospital, a 384-bed facility in Rock Island, Illinois; Franklin Foundation Hospital, a 100-bed hospital in Franklin, Louisiana; and the North American Air Defense Command Cheyenne Mountain Complex, a military installation near Colorado Springs, Colorado. The case studies include descriptions of plant components and configurations, operation and maintenance procedures, reliability, relationships to public utilities, staffing, economic efficiency, and factors contributing to success.

  12. Stochastic efficiency: five case studies

    International Nuclear Information System (INIS)

    Proesmans, Karel; Broeck, Christian Van den

    2015-01-01

    Stochastic efficiency is evaluated in five case studies: driven Brownian motion, effusion with a thermo-chemical and thermo-velocity gradient, a quantum dot and a model for information to work conversion. The salient features of stochastic efficiency, including the maximum of the large deviation function at the reversible efficiency, are reproduced. The approach to and extrapolation into the asymptotic time regime are documented. (paper)

  13. Case Study: Guidelines for Producing Videos to Accompany Flipped Cases

    Science.gov (United States)

    Prud'homme-Généreux, Annie; Schiller, Nancy A.; Wild, John H.; Herreid, Clyde Freeman

    2017-01-01

    Three years ago, the "National Center for Case Study Teaching in Science" (NCCSTS) was inspired to merge the case study and flipped classroom approaches. The resulting project aimed to create the materials required to teach a flipped course in introductory biology by assigning videos as homework and case studies in the classroom. Three…

  14. CAREM X INPRO case study

    International Nuclear Information System (INIS)

    Florido, P.C.; Brasnarof, D.; Delmastro, D.; Azpitarte, O.E.

    2004-01-01

    In order to assess and compare the performance of innovative nuclear energy systems INPRO has defined a set of basic principles, user requirements and criteria to be met in different areas (economics, sustainability and environment, safety, waste management and proliferation). This paper illustrates the use of INPRO methodology to a particular reactor system. Argentina is performing CAREM X Nuclear System Case Study based on CAREM nuclear reactor and Once Through Fuel Cycle, using SIGMA for enriched uranium production, and a deep geological repository for final disposal of high level waste after surface intermediate storage in horizontal natural convection silos, to verify INPRO (International Project on Innovative Nuclear Reactors and Fuel Cycles) methodology. 6 aspects have been considered: 1) enrichment based on Sigma enrichment plant (gas diffusion technology), 2) conversion to UO 2 , 3) fuel manufacturing, 4) CAREM-300 based reactor technology, 5) intermediate spent fuel storage, and 6) deep geological repository of spent fuels. Projections show that developing countries could play a crucial role in the deployment of nuclear energy, in the next fifty years. This case study will be highly useful for checking INPRO methodology for this scenario. In this paper, the preliminary findings of the Case Study are presented, including proposals to improve the INPRO methodology

  15. A case study of Impetigo

    Directory of Open Access Journals (Sweden)

    Mansouri P

    1993-05-01

    Full Text Available This is a report of a case study on 234 patients with impetigo who referred to Razi Dermatology Hospital from April to November, 1989. Treatment was started immediately after obtaining direct smear and performing culture and antibiotic sensitivity test. The most common organism responsible for impetigo was the coagulase-positive staphylococcus (71%. In 13.7% of the cases, the coagulase-negative staphylococcus was grown on culture media, but none of the cultures showed streptococcus as the main organism. Treatment was started with oral penicillin V, oral erythromycin, benzathine penicillin G injection, oral cephalexin, and topical fuccidin. Clinical and bacteriological evaluation after 3-7 days showed that it is preferable to use oral cephalexin instead of other protocols such as oral erythromycin, which has previously been the drug of choice for impetigo. In addition, topical fuccidin with a 75% curative rate was the first drug for treatment, with the same effect as the oral cephalexin

  16. Strategies for enhancing the co-removal of mercury in FGD-scrubbers of power plants. Operating parameters and additives

    Energy Technology Data Exchange (ETDEWEB)

    Schuetze, Jan; Koeser, Heinz [Magdeburg Univ. (Germany). Chair of Environmental Technology; Halle-Wittenberg Univ., Halle (Germany). Centre of Engineering Services

    2012-07-01

    Co-combustion of waste fuels, coals with variable mercury content and lower regulatory emission limits are drivers for the optimisation of the co-removal of mercury in flue gas desulphurisation (FGD) scrubbers. The paper explains some new features of the system performance of FGD scrubbers for the co-removal of mercury in coal-fired power plants. Results on their efficiency under standardised laboratory conditions are presented. The effect of these measures on the quality of the FGD by-product gypsum will be covered as well. (orig.)

  17. Maatregelen ter vermindering van fijnstofemissie uit pluimveehouderij: validatie van een luchtwassysteem met water als wasvloeistof bij twee pluimveebedrijven = Measures to reduce fine dust emissions from poultry housings: validation of a scrubber system with water as scrubbing solution at two poultry farms

    NARCIS (Netherlands)

    Melse, R.W.; Hol, J.M.G.; Dousma, F.; Nijeboer, G.M.; Huis in 'T Veld, J.W.H.

    2011-01-01

    In this study the removal efficiency for fine dust (PM10 and PM2.5) has been determined at two scrubbers located at two different poultry houses in addition, inlet and outlet concentrations were measured for ammonia, greenhouse gases and odour.

  18. Converting SDAP into gypsum in a wet limestone scrubber

    Energy Technology Data Exchange (ETDEWEB)

    Fogh, F [Faelleskemikerne, Elsamprojekt A/S, Fredericia (Denmark)

    1996-12-01

    The ELSAM power pool has an installed electrical capacity of approx. 5 GW{sub e}, mainly firing import coal. The major base load units are equipped with desulphurization units and three different desulphurization technologies are used: the wet limestone gypsum process, the spray dry absorption process and a sulphuric acid process. Gypsum and sulphuric acid are commercialized, whereas it has been difficult to utilize the spray dry absorption product (SDAP). The main constituents of SDAP are calcium sulphide, calcium chloride, hydrated lime and impurities mainly originating from fly ash. Sulphide can be oxidized into sulphate in acidic solution - the reaction is utilized in the wet limestone gypsum process - and the possibility of using any spare capacity in the wet limestone gypsum units to oxidize the sulphide content of SDAP into sulphate and produce usable gypsum has been investigated in the laboratory and in a 400 MW{sub e} equivalent wet limestone unit. The limestone inhibition effect of the addition of SDAP is currently being studied in the laboratory in order to determine the effect of different SDAP types (plant/coal sources) on limestone reactivity before further long-term full-scale tests are performed and permanent use of the process planned. (EG)

  19. Oxidation of North Dakota scrubber sludge for soil amendment and production of gypsum. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hassett, D.J.; Moe, T.A.

    1997-10-01

    Cooperative Power`s Coal Creek Station (CCS) the North Dakota Industrial Commission, and the US Department of Energy provided funds for a research project at the Energy and Environmental Research Center. The goals of the project were (1) to determine conditions for the conversion of scrubber sludge to gypsum simulating an ex situ process on the laboratory scale; (2) to determine the feasibility of scaleup of the process; (3) if warranted, to demonstrate the ex situ process for conversion on the pilot scale; and (4) to evaluate the quality and handling characteristics of the gypsum produced on the pilot scale. The process development and demonstration phases of this project were successfully completed focusing on ex situ oxidation using air at low pH. The potential to produce a high-purity gypsum on a commercial scale is excellent. The results of this project demonstrate the feasibility of converting CCS scrubber sludge to gypsum exhibiting characteristics appropriate for agricultural application as soil amendment as well as for use in gypsum wallboard production. Gypsum of a purity of over 98% containing acceptable levels of potentially problematic constituents was produced in the laboratory and in a pilot-scale demonstration.

  20. MULTIPLE PERSONALITY: CASE REPORT STUDY

    Directory of Open Access Journals (Sweden)

    Miloš Židanik

    2004-07-01

    Full Text Available Background. Multiple personality disorder is characterised by splited individual ego-states and splited professional community arguing whether this disorder actually exists or not.Methods. In this case report study a supportive psychodynamic psychotherapy of a patient with multiple personality disorder is presented, that lasted for 4.5 years and resulted in ego-reintegration.Conclusions. The spliting between different ego-states is powered by unneutralised aggression with the possibility of hetero- and autoaggressive behaviour. Therefore the patient in the analytically oriented psychotherapeutic process is at high risk and a safe therapeutic (e. g. in-patient setting has to be provided.

  1. Overview of the Case Studies

    DEFF Research Database (Denmark)

    Cameron, Ian; Gani, Rafiqul

    2011-01-01

    A series of case studies are used to illustrate many of the underlying modelling principles within the book. To facilitate this, the ICAS-MoT modelling tool has been used. A wide range of application areas have been chosen to ensure that the principal concepts of effective and efficient modelling...... are exercised. Conceptual frameworks for single and multiscale problems are given and explained. The importance of the steps is also explained, through annotated schematic diagrams. The important issues around workflow and data flow are given in diagrammatic form....

  2. Hospital Waste Management - Case Study

    Directory of Open Access Journals (Sweden)

    Beatriz Edra

    2017-07-01

    Full Text Available The importance of waste management in hospitals is indisputable in preserving the environment and protecting public health, but management models are rarely discussed. This study presents the legal and conceptual frameworks of good waste management practices applicable to hospitals and associated indicators. As a case study, the overall performance of Hospital Centre of São João, in Porto, was analysed based on published reports. Data on the production of waste in their different typologies were collected from 2010 to 2016, enabling a correlation of the waste production with the kg/bed/day indicator. The aim of this study was to gather data and discuss trends in a real scenario of evolution over a six-year period in order to contribute to a future research proposal on indicators that can be used as reference for benchmarking the construction of methodological guides for hospital waste management.

  3. Qualitative Case Study Research as Empirical Inquiry

    Science.gov (United States)

    Ellinger, Andrea D.; McWhorter, Rochell

    2016-01-01

    This article introduces the concept of qualitative case study research as empirical inquiry. It defines and distinguishes what a case study is, the purposes, intentions, and types of case studies. It then describes how to determine if a qualitative case study is the preferred approach for conducting research. It overviews the essential steps in…

  4. A parathyroid scintigraphy case study

    International Nuclear Information System (INIS)

    O'Leary, Desiree

    2005-01-01

    Background: There has been much debate concerning the most suitable protocol for parathyroid scintigraphy; the merits of various radiopharmaceuticals versus the correct imaging protocol to visualise both ectopic and anatomically placed adenomas against the various equipment choices have been debated. Aim: To demonstrate, through the use of a case study, the necessity of changing imaging protocols for parathyroid scintigraphy where a definitive imaging diagnosis is absent in the face of strong clinical suspicion. Method: Use is made of Tc99mMIBI, full field chest scintigraphy, a clearly defined imaging protocol and SPECT imaging to locate ectopic parathyroid tissue in a female patient with significant symptoms of parathyroid hyperfunction. Results: A single hyperfunctioning adenoma is located in the pre-carinal area of the mediastinum. Using a radioguided surgical technique the hyperfunctioning tissue is excised and confirmed by histopathology. Conclusion: Whilst a dramatic reduction in patient symptoms was not seen immediately in this patient, the symptoms of the illness have been subsiding since January 2003. This case study demonstrates the necessity of changing imaging protocols for parathyroid scintigraphy where a definitive imaging diagnosis is absent in the face of strong clinical suspicion

  5. Using Correspondence Analysis in Multiple Case Studies

    NARCIS (Netherlands)

    Kienstra, Natascha; van der Heijden, Peter G.M.

    2015-01-01

    In qualitative research of multiple case studies, Miles and Huberman proposed to summarize the separate cases in a so-called meta-matrix that consists of cases by variables. Yin discusses cross-case synthesis to study this matrix. We propose correspondence analysis (CA) as a useful tool to study

  6. Using correspondence analysis in multiple case studies

    NARCIS (Netherlands)

    Kienstra, N.H.H.; van der Heijden, P.G.M.

    2015-01-01

    In qualitative research of multiple case studies, Miles and Huberman proposed to summarize the separate cases in a so-called meta-matrix that consists of cases by variables. Yin discusses cross-case synthesis to study this matrix. We propose correspondence analysis (CA) as a useful tool to study

  7. Case Study: A Picture Worth a Thousand Words? Making a Case for Video Case Studies

    Science.gov (United States)

    Pai, Aditi

    2014-01-01

    A picture, they say, is worth a thousand words. If a mere picture is worth a thousand words, how much more are "moving pictures" or videos worth? The author poses this not merely as a rhetorical question, but because she wishes to make a case for using videos in the traditional case study method. She recommends four main approaches of…

  8. Case studies in ultrasonic testing

    International Nuclear Information System (INIS)

    Prasad, V.; Satheesh, C.; Varde, P.V.

    2015-01-01

    Ultrasonic testing is widely used Non Destructive Testing (NDT) method and forms the essential part of In-service inspection programme of nuclear reactors. Main application of ultrasonic testing is for volumetric scanning of weld joints followed by thickness gauging of pipelines and pressure vessels. Research reactor Dhruva has completed the first In Service Inspection programme in which about 325 weld joints have been volumetrically scanned, in addition to thickness gauging of 300 meters of pipe lines of various sizes and about 24 nos of pressure vessels. Ultrasonic testing is also used for level measurements, distance measurements and cleaning and decontamination of tools. Two case studies are brought out in this paper in which ultrasonic testing is used successfully for identification of butterfly valve opening status and extent of choking in pipe lines in Dhruva reactor systems

  9. STS Case Study Development Support

    Science.gov (United States)

    Rosa de Jesus, Dan A.; Johnson, Grace K.

    2013-01-01

    The Shuttle Case Study Collection (SCSC) has been developed using lessons learned documented by NASA engineers, analysts, and contractors. The SCSC provides educators with a new tool to teach real-world engineering processes with the goal of providing unique educational materials that enhance critical thinking, decision-making and problem-solving skills. During this third phase of the project, responsibilities included: the revision of the Hyper Text Markup Language (HTML) source code to ensure all pages follow World Wide Web Consortium (W3C) standards, and the addition and edition of website content, including text, documents, and images. Basic HTML knowledge was required, as was basic knowledge of photo editing software, and training to learn how to use NASA's Content Management System for website design. The outcome of this project was its release to the public.

  10. Monitoringsprogramma experimentele gecombineerde luchtwassers op veehouderijbedrijven = Measurement program on experimental multi-pollutant air scrubbers at animal houses

    NARCIS (Netherlands)

    Melse, R.W.; Hol, J.M.G.; Mosquera Losada, J.; Nijeboer, G.M.; Huis in 'T Veld, J.W.H.; Hattum, van T.G.; Kwikkel, R.K.; Dousma, F.; Ogink, N.W.M.

    2011-01-01

    A measurement program was carried out in which the performance of 5 experimental scrubbers on animal farms was monitored for the removal of ammonia, odour and fine dust (PM10, PM2.5). This reports discusses and evaluates the realization of the program and its results.

  11. Elektronische monitoring van luchtwassers op veehouderijbedrijven = Automated process monitoring and data logging of air scrubbers at animal houses

    NARCIS (Netherlands)

    Melse, R.W.; Franssen, J.C.T.J.

    2010-01-01

    At 6 animal houses air scrubbers equipped with an automated process monitoring and data logging system were tested. The measured values were successfully stored but the measured values, especially the pH and EC of the recirculation water, appeared not to be correct at all times.

  12. Experimental investigation on the effect of liquid injection by multiple orifices in the formation of droplets in a Venturi scrubber

    Energy Technology Data Exchange (ETDEWEB)

    Guerra, V.G.; Goncalves, J.A.S. [Department of Chemical Engineering, Federal University of Sao Carlos, Via Washington Luiz, Km. 235, 13565-905 Sao Carlos, SP (Brazil); Coury, J.R. [Department of Chemical Engineering, Federal University of Sao Carlos, Via Washington Luiz, Km. 235, 13565-905 Sao Carlos, SP (Brazil)], E-mail: jcoury@ufscar.br

    2009-01-15

    Venturi scrubbers are widely utilized in gas cleaning. The cleansing elements in these scrubbers are droplets formed from the atomization of a liquid into a dust-laden gas. In industrial scrubbers, this liquid is injected through several orifices so that the cloud of droplets can be evenly distributed throughout the duct. The interaction between droplets when injected through many orifices, where opposite clouds of atomized liquid can reach each other, is to be expected. This work presents experimental measurements of droplet size measured in situ and the evidence of cloud interaction within a Venturi scrubber operating with multi-orifice jet injection. The influence of gas velocity, liquid flow rate and droplet size variation in the axial position after the point of the injection of the liquid were also evaluated for the different injection configurations. The experimental results showed that an increase in the liquid flow rate generated greater interaction between jets. The number of orifices had a significant influence on droplet size. In general, the increase in the velocity of the liquid jet and in the gas velocity favored the atomization process by reducing the size of the droplets.

  13. Experimental investigation on the effect of liquid injection by multiple orifices in the formation of droplets in a Venturi scrubber

    International Nuclear Information System (INIS)

    Guerra, V.G.; Goncalves, J.A.S.; Coury, J.R.

    2009-01-01

    Venturi scrubbers are widely utilized in gas cleaning. The cleansing elements in these scrubbers are droplets formed from the atomization of a liquid into a dust-laden gas. In industrial scrubbers, this liquid is injected through several orifices so that the cloud of droplets can be evenly distributed throughout the duct. The interaction between droplets when injected through many orifices, where opposite clouds of atomized liquid can reach each other, is to be expected. This work presents experimental measurements of droplet size measured in situ and the evidence of cloud interaction within a Venturi scrubber operating with multi-orifice jet injection. The influence of gas velocity, liquid flow rate and droplet size variation in the axial position after the point of the injection of the liquid were also evaluated for the different injection configurations. The experimental results showed that an increase in the liquid flow rate generated greater interaction between jets. The number of orifices had a significant influence on droplet size. In general, the increase in the velocity of the liquid jet and in the gas velocity favored the atomization process by reducing the size of the droplets

  14. Experimental investigation on the effect of liquid injection by multiple orifices in the formation of droplets in a Venturi scrubber.

    Science.gov (United States)

    Guerra, V G; Gonçalves, J A S; Coury, J R

    2009-01-15

    Venturi scrubbers are widely utilized in gas cleaning. The cleansing elements in these scrubbers are droplets formed from the atomization of a liquid into a dust-laden gas. In industrial scrubbers, this liquid is injected through several orifices so that the cloud of droplets can be evenly distributed throughout the duct. The interaction between droplets when injected through many orifices, where opposite clouds of atomized liquid can reach each other, is to be expected. This work presents experimental measurements of droplet size measured in situ and the evidence of cloud interaction within a Venturi scrubber operating with multi-orifice jet injection. The influence of gas velocity, liquid flow rate and droplet size variation in the axial position after the point of the injection of the liquid were also evaluated for the different injection configurations. The experimental results showed that an increase in the liquid flow rate generated greater interaction between jets. The number of orifices had a significant influence on droplet size. In general, the increase in the velocity of the liquid jet and in the gas velocity favored the atomization process by reducing the size of the droplets.

  15. THE FATE OF TRACE METALS IN A ROTARY KILN INCINERATOR WITH A VENTURI/PACKED COLUMN SCRUBBER - VOLUME II: APPENDICES

    Science.gov (United States)

    A 5-week series of pilot-scale incineration tests, employing a synthetic waste feed, was performed at the U.S. Environmental Protection Agency's Incineration Research Facility to evaluate the fate of trace metals fed to a rotary kiln incinerator equipped with a venturi scrubber/p...

  16. Simultaneous treatment of NO and SO{sub 2} with aqueous NaClO{sub 2} solution in a wet scrubber combined with a plasma electrostatic precipitator

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hyun-Woo [Department of Chemistry and Chemical Engineering and Regional Innovation Center for Environmental Technology of Thermal Plasma (RIC-ETTP), INHA University, 100 Inha-ro, Nam-gu, Incheon 402-751 (Korea, Republic of); Choi, Sooseok, E-mail: sooseok@jejunu.ac.kr [Department of Nuclear and Energy Engineering, Jeju National University, 102 Jejudaehak-ro, Jeju-si, Jeju Special Self-Governing Province, 690-756 (Korea, Republic of); Park, Dong-Wha, E-mail: dwpark@inha.ac.kr [Department of Chemistry and Chemical Engineering and Regional Innovation Center for Environmental Technology of Thermal Plasma (RIC-ETTP), INHA University, 100 Inha-ro, Nam-gu, Incheon 402-751 (Korea, Republic of)

    2015-03-21

    Highlights: • This study was conducted to investigate simultaneous removal of NO and SO{sub 2}. • Proposed process consists of wet chemical reactor and non-thermal plasma reactor. • In the wet chemical reactor, NO and SO{sub 2} were absorbed and oxidized by NaClO{sub 2}. • In the non-thermal plasma reactor, aerosol particles were collected on anode surface. • NO and SO{sub 2} were removed more efficiently by proposed process than other methods. - Abstract: NO and SO{sub 2} gases that are generally produced in thermal power plants and incinerators were simultaneously removed by using a wet scrubber combined with a plasma electrostatic precipitator. The wet scrubber was used for the absorption and oxidation of NO and SO{sub 2}, and non-thermal plasma was employed for the electrostatic precipitation of aerosol particles. NO and SO{sub 2} gases were absorbed and oxidized by aerosol particles of NaClO{sub 2} solution in the wet scrubber. NO and SO{sub 2} reacted with the generated NaClO{sub 2} aerosol particles, NO{sub 2} gas, and aqueous ions such as NO{sub 2}{sup −}, NO{sub 3}{sup −}, HSO{sub 3}{sup −}, and SO{sub 4}{sup 2−}. The aerosol particles were negatively charged and collected on the surface of grounded anode in the plasma electrostatic precipitator. The NO and SO{sub 2} removal efficiencies of the proposed system were 94.4% and 100% for gas concentrations of 500 mg/m{sup 3} and a total gas flow rate of 60 Nm{sup 3}/h, when the molar flow rate of NaClO{sub 2} and the gas–liquid contact time were 50 mmol/min and 1.25 s, respectively. The total amount and number of aerosol particles in the exhaust gas were reduced to 7.553 μg/m{sup 3} and 210 /cm{sup 3} at the maximum plasma input power of 68.8 W, which are similar to the values for clean air.

  17. Waste Treatment And Immobilization Plant U. S. Department Of Energy Office Of River Protection Submerged Bed Scrubber Condensate Disposition Project - Abstract no. 13460

    International Nuclear Information System (INIS)

    Yanochko, Ronald M; Corcoran, Connie

    2012-01-01

    The Hanford Waste Treatment and Immobilization Plant (WTP) will generate an off-gas treatment system secondary liquid waste stream [submerged bed scrubber (SBS) condensate], which is currently planned for recycle back to the WTP Low Activity Waste (LAW) melter. This SBS condensate waste stream is high in Tc-99, which is not efficiently captured in the vitrified glass matrix. A pre-conceptual engineering study was prepared in fiscal year 2012 to evaluate alternate flow paths for melter off-gas secondary liquid waste generated by the WTP LAW facility. This study evaluated alternatives for direct off-site disposal of this SBS without pre-treatment, which mitigates potential issues associated with recycling

  18. Waste Treatment And Immobilization Plant U. S. Department Of Energy Office Of River Protection Submerged Bed Scrubber Condensate Disposition Project - Abstract # 13460

    Energy Technology Data Exchange (ETDEWEB)

    Yanochko, Ronald M [Washington River Protection Solutions, Richland, WA (United States); Corcoran, Connie [AEM Consulting, LLC, Richland, WA (United States)

    2012-11-15

    The Hanford Waste Treatment and Immobilization Plant (WTP) will generate an off-gas treatment system secondary liquid waste stream [submerged bed scrubber (SBS) condensate], which is currently planned for recycle back to the WTP Low Activity Waste (LAW) melter. This SBS condensate waste stream is high in Tc-99, which is not efficiently captured in the vitrified glass matrix. A pre-conceptual engineering study was prepared in fiscal year 2012 to evaluate alternate flow paths for melter off-gas secondary liquid waste generated by the WTP LAW facility. This study evaluated alternatives for direct off-site disposal of this SBS without pre-treatment, which mitigates potential issues associated with recycling.

  19. Plume rise from stacks with scrubbers: a state-of-the-art review

    International Nuclear Information System (INIS)

    Schatzmann, M.; Policastro, A.J.

    1984-01-01

    The state of the art of predicting plume rise from stacks with scrubbers is evaluated critically. The significant moisture content of the scrubbed plume upon exit leads to important thermodynamic effects during plume rise that are unaccounted for in the usual dry plume rise theories. For example, under conditionally unstable atmospheres, a wet scrubbed plume treated as completely dry acts as if the atmosphere were stable, whereas in reality the scrubbed plume behaves instead as if the atmosphere were unstable. Even the use of moist plume models developed for application to cooling tower plume rise is not valid since these models 1) employ the Boussinesq approximation, 2) use a number of additional simplifying approximations that require small exit temperature differences between tower exit and ambient temperatures, and 3) are not calibrated to stack data

  20. Five Misunderstandings About Case-Study Research

    DEFF Research Database (Denmark)

    Flyvbjerg, Bent

    2006-01-01

    This article examines five common misunderstandings about case-study research: (a) theoretical knowledge is more valuable than practical knowledge; (b) one cannot generalize from a single case, therefore, the single-case study cannot contribute to scientific development; (c) the case study is most...... useful for generating hypotheses, whereas other methods are more suitable for hypotheses testing and theory building; (d) the case study contains a bias toward verification; and (e) it is often difficult to summarize specific case studies. This article explains and corrects these misunderstandings one...

  1. Two years of outstanding AFGD performance, pure air on the Lakes Bailly Scrubber Facility

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, J.; Vymazal, D.C. [Pure Air, Allentown, PA (United States); Styf, D.A. [Northern Indiana Public Service Company (NIPSCO), Chesterton, IN (United States)] [and others

    1994-12-31

    The {open_quotes}Advanced Flue Gas Desulfurization (AFGD) Demonstration Project{close_quotes} is a $151.3 million cooperative effort between the U.S. Department of Energy and a project company of Pure Air, a general partnership of Air Products and Chemicals, Inc. and Mitsubishi Heavy Industries America, Inc. The goal of the AFGD project is to demonstrate that, by combining state-of-the-art technology, highly efficient plant operation and maintenance capabilities, and by-product gypsum sales, significant reductions of SO{sub 2} emissions can be achieved at approximately one-half the life cycle of a conventional Flue Gas Desulfurization (FGD) system. Further, this emission reduction is achieved without generating solid waste and while minimizing liquid wastewater effluent. Briefly, this project entails the design, construction and operation of a nominal 600 MWe AFGD facility to remove SO{sub 2} from coal-fired power plant flue gas at the Northern Indiana Public Service Company`s Bailly Generating Station, located approximately 40 miles southeast of Chicago, Illinois. The facility is used to demonstrate a variety of advanced technical and business-related features, during a three-year period of operation which began in the summer of 1992. The aim of this demonstration is to accelerate near-term commercialization. Key features of the AFGD project are discussed. Construction of the scrubber is complete; operations began in June 1992, ahead of schedule and within budget. The Clean Coal demonstration project calls for three years of operations. After the three-year demonstration period, Pure Air on the Lake will continue to Own-and-Operate the scrubber for the next 17 years. This paper review the advanced wet flue gas desulfurization (FGD) design features, and the environmental and business features of the project. Also included are data on the first two years of successful operation.

  2. [Case-non case studies: Principles, methods, bias and interpretation].

    Science.gov (United States)

    Faillie, Jean-Luc

    2017-10-31

    Case-non case studies belongs to the methods assessing drug safety by analyzing the disproportionality of notifications of adverse drug reactions in pharmacovigilance databases. Used for the first time in the 1980s, the last few decades have seen a significant increase in the use of this design. The principle of the case-non case study is to compare drug exposure in cases of a studied adverse reaction with that of cases of other reported adverse reactions and called "non cases". Results are presented in the form of a reporting odds ratio (ROR), the interpretation of which makes it possible to identify drug safety signals. This article describes the principle of the case-non case study, the method of calculating the ROR and its confidence interval, the different modalities of analysis and how to interpret its results with regard to the advantages and limitations of this design. Copyright © 2017 Société française de pharmacologie et de thérapeutique. Published by Elsevier Masson SAS. All rights reserved.

  3. Concentrated photovoltaics, a case study

    Directory of Open Access Journals (Sweden)

    Antonini Piergiorgio

    2014-01-01

    Full Text Available Concentrated Photovoltaics (CPV, once a niche technology, has now reached the maturity and reliability for large scale power generation. Especially in regions where temperatures are very high, the use of high efficiency triple junction solar cells with concentrating optics allows stable energy yield. Thus CPV can be seen as complementary and not in concurrence with silicon photovoltaics. The state of the art, the advantages and limitations of this technology will be shown. Among the main advantages of CPV is the possibility of a much higher energy supply, when compared to silicon photovoltaics, both comparing CPV and silicon with same area or the same installed power. The use of recycled and recyclable materials allows a more environmentally friendly production. The possibility to couple CPV with desalination facilities, energy storage will be analysed. As an example a case study of a CPV installation in Northern Italy is discussed. Here the use of mature technologies, derived from automotive and lighting sectors resulted in a simple and efficient module.

  4. Case Studies of Environmental Visualization

    Directory of Open Access Journals (Sweden)

    Panagiotis Patlakas

    2017-09-01

    Full Text Available The performance gap between simulation and reality has been identified as a major challenge to achieving sustainability in the Built Environment. While Post-Occupancy Evaluation (POE surveys are an integral part of better understanding building performance, and thus addressing this issue, the importance of POE remains relatively unacknowledged within the wider Built Environment community. A possible reason that has been highlighted is that POE survey data is not easily understood and utilizable by non-expert stakeholders, including designers. A potential method by which to address this is the visualization method, which has well established benefits for communication of big datasets. This paper presents two case studies where EnViz (short for “Environmental Visualization”, a prototype software application developed for research purposes, was utilized and its effectiveness tested via a range of analysis tasks. The results are discussed and compared with those of previous work that utilized variations of the methods presented here. The paper concludes by presenting the lessons drawn from the five-year period of EnViz, emphasizing the potential of environmental visualization for decision support in environmental design and engineering for the built environment, and suggests directions for future development.

  5. Catalog of NASA-Related Case Studies

    Data.gov (United States)

    National Aeronautics and Space Administration — The OCKO has developed over 50 case studies to enhance learning at workshops, training, retreats and conferences. Case studies make mission knowledge attractive and...

  6. a South African case study

    African Journals Online (AJOL)

    User

    learn different algorithms to solve problems, but in many cases cannot solve .... centre of Piaget‟s work is a fundamental cognitive process, which he termed ..... concept definition of continuity in calculus through collaborative instructional ...

  7. Case Study: The Chemistry of Cocaine

    Science.gov (United States)

    Dewprashad, Brahmadeo

    2011-01-01

    This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's case study focuses on the chemistry of cocaine to teach a number of core concepts in organic chemistry. It also requires that students read and analyze an original research paper on…

  8. Writing case studies in information systems research

    NARCIS (Netherlands)

    van der Blonk, H.C.

    Case study research can be reported in different ways. This paper explores the various ways in which researchers may choose to write down their case studies and then introduces a subsequent typology of writing case studies. The typology is based on a 2 x 2 matrix, resulting in four forms of writing

  9. Summary of case studies for cooperation mechanisms

    DEFF Research Database (Denmark)

    Longa, Francesco Dalla; Klinge Jacobsen, Henrik; Hansen, Lise-Lotte Pade

    2012-01-01

    This document is a summary report highlighting the main aspect analyzed in the RES4LESS case studies. The document starts with an introductory chapter where the background that led to the selection of the case studies is outlined. In the following three chapters the case studies are presented, hi...

  10. Lymphedema during pregnancy - case study

    Directory of Open Access Journals (Sweden)

    Katarzyna Korabiusz

    2017-06-01

    Full Text Available Pregnancy is a period when woman’s body undergoes a lot of changes in her hormonal balance, lymphatic system, musculoskeletal system and cardiovascular system. As a result of disorders in defense mechanisms, a significant amount of liquid accumulates in spaces between tissues. A clinical manifestation of this condition is swelling located around ankles and lower legs. Sedentary lifestyle, unhealthy eating habits, excessive weight and pregnancy are also well known causes of lymphatic swelling. Comprehensive anti-swelling therapy that is used in treating lymphatic swelling in pregnant patients includes: patients’ education, manual lymphatic drainage, kinesitherapy, multilayer bandaging, skin care, drainage positions and kinesiotaping. Dissertation’s objective: Dissertation’s objective is to evaluate implementation of manual lymphatic drainage and anti-swelling kinesiotaping in pregnant woman with lymphatic swelling of lower legs. Research methods: Research methods were collected basing on: interview with a patient, medical documentation analysis and physical examination conduced before and after therapy. Research was conducted between 34th and 36th week of pregnancy. Case study: 38 year old patient in her fourth singleton pregnancy. Two prior pregnancies in 2009 and 2010 were delivered with C-section and one missed abortion in 2015 occurred. During this pregnancy patient gained over 30kg. She was diagnosed with lymphatic swelling of metatarsus, lower legs and ankles in 34th week of pregnancy. Lymphatic drainage of lower limbs and anti-swelling kinesiotaping was implemented. Results: After two weeks of therapy decrease in swelling was observed in left lower limb: in metatarsus by 8cm, in ankles by 9cm and in lower legs by 6cm. In right lower limb swelling decreased accordingly by 7cm, 10cm and 5cm. Conclusion: Anti-swelling lymphatic drainage, kinesiotherapy and kinesiotaping are effective physiotherapy methods used in treating lymphedema

  11. SPHENOCHOANAL POLYP: A CASE STUDY

    Directory of Open Access Journals (Sweden)

    Gaurav

    2015-09-01

    Full Text Available Sphenochoanal polyp is a rare clinical occurrence as compared to the much common antro - choanal polyp. It originates from the sphenoid sinus and extends into the choana via the sphenoid ostium. We present a case of spheno - choanal polyp and its clinical features and surgical management is discussed. Our aim in this case was to properly d elineate the origin of the polyp and differentiate it from other lesions such as the antro - choanal polyp and meningocele, followed by meticulous endoscopic excision of the polyp

  12. Using Case Studies to Enrich Field Experience.

    Science.gov (United States)

    Florio-Ruane, Susan; Clark, Christopher M.

    1990-01-01

    This paper discusses the use of field experience in teacher education and how it can be augmented by phenomenological case studies. It summarizes a particular case study involving three teacher education classes, noting that reflective analysis of cases can prepare students to observe in the field. (SM)

  13. Transanal rectopexy - twelve case studies

    Directory of Open Access Journals (Sweden)

    Rubens Henrique Oleques Fernandes

    2012-06-01

    Full Text Available OBJECTIVES: This study analyzed the results of transanal rectopexy and showed the benefits of this surgical technique. METHOD: Twelve patients were submitted to rectopexy between 1997 and 2011. The surgical technique used was transanal rectopexy, where the mesorectum was fixed to the sacrum with nonabsorbable suture. Three patients had been submitted to previous surgery, two by the Delorme technique and one by the Thiersch technique. RESULTS: Postoperative hospital stay ranged from 1 to 4 days. One patient (8.3% had intraoperative hematoma, which was treated with local compression and antibiotics. One patient (8.3% had residual mucosal prolapse, which was resected. Prolapse recurrence was seen in one case (8.3%. Improved incontinence occurred in 75% of patients and one patient reported obstructed evacuation in the first month after surgery. No death occurred. CONCLUSION: Transanal rectopexy is a simple, low cost technique, which has shown good efficacy in rectal prolapse control.OBJETIVO: O presente estudo analisou os resultados da retopexia pela via transanal e expôs os benefícios desta técnica cirúrgica. MÉTODO: Doze pacientes com prolapso foram operados no período de 1997 a 2011. A técnica cirúrgica usada foi a retopexia transanal, onde o mesorreto foi fixado ao sacro com fio inabsorvível. Três pacientes tinham cirurgia prévia, dois pela técnica de Delorme e um pela técnica de Thiersch. RESULTADOS: A permanência hospitalar pós-operatória variou de 1- 4 dias. Uma paciente (8,3% apresentou hematoma transoperatório que foi tratado com compressão local e antibioticoterapia. Um paciente apresentou prolapso mucoso residual (8,3%, que foi ressecado. Houve recidiva da procidência em um caso (8,3%. A melhora da incontinência ocorreu em 75% dos pacientes e uma paciente apresentou bloqueio evacuatório no primeiro mês após a cirurgia. Não houve mortalidade entre os pacientes operados. CONCLUSÃO: A retopexia transanal é uma t

  14. WP4 Case study Report

    DEFF Research Database (Denmark)

    Elle, Morten; van Gameren, Valentine; Pel, Bonno

    The INFORSE case consists of an analysis of the transnational network INFORSE (International Network for Sustainable Energy), the Danish local initiative VE and the Belgian local initiative APERe. All three are dealing with renewable energy and energy savings. The link between INFORSE and VE...

  15. Five misunderstandings about Case-study Research

    DEFF Research Database (Denmark)

    Flyvbjerg, Bent

    This article examines five common misunderstandings about case-study research: (1) Theoretical knowledge is more valuable than practical knowledge; (2) One cannot generalize from a single case, therefore the single case study cannot contribute to scientific development; (3) The case study is most...... useful for generating hypotheses, while other methods aremore suitable for hypotheses testing and theory building; (4) The case study contains a bias toward verification; and (5) It is often difficult to summarize specific case studies. The article explains and corrects these misunderstandings one by one...... and concludes with the Kuhnian insight that a scientific discipline without a large number of thoroughly executed case studies is a discipline without systematic production of exemplars, and that a discipline without  exemplars is an ineffective one. Social science may be strengthened by the execution of more...

  16. Five misunderstandings about case study research

    DEFF Research Database (Denmark)

    Flyvbjerg, Bent

    2004-01-01

    This article examines five common misunderstandings about case-study research: (1) Theoretical knowledge is more valuable than practical knowledge; (2) One cannot generalize from a single case, therefore the single case study cannot contribute to scientific development; (3) The case study is most...... useful for generating hypotheses, while other methods aremore suitable for hypotheses testing and theory building; (4) The case study contains a bias toward verification; and (5) It is often difficult to summarize specific case studies. The article explains and corrects these misunderstandings one by one...... and concludes with the Kuhnian insight that a scientific discipline without a large number of thoroughly executed case studies is a discipline without systematic production of exemplars, and that a discipline without exemplars is an ineffective one. Social science may be strengthened by the execution of more...

  17. Drive Electric Vermont Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, Fred [Energetics Incorporated, Columbia, MD (United States); Roberts, Dave [Vermont Energy Investment Corporation (VEIC), Burlington, VT (United States); Francfort, Jim [Idaho National Lab. (INL), Idaho Falls, ID (United States); White, Sera [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    Currently in the United States, the heavy majority of plug-in electric vehicle (PEV) sales have been in highly conducive, selected, metropolitan areas; opposed to more broad distribution across the country. The U.S. Department of Energy’s EV Everywhere Grand Challenge is looking carefully at the barriers and opportunities that exist to enable small and midsize communities to partake in the PEV market and benefit from the economic and environmental advantages of PEVs. In order to gain insight into these challenges and barriers, DOE selected a success story (i.e., Drive Electric Vermont) as the subject of this case study, as the state of Vermont is tied with Detroit, Michigan in having the highest percentage of 2014 (most recent complete data) PEV registrations for cold weather U.S. cities and has seen more than a sixfold increase in charging stations over the last three years. The overall objective of this case study was to use the lessons learned from Drive Electric Vermont to determine what activities are most effective at encouraging acquisitions of PEVs and deployment of charging infrastructure in small to midsize communities, prioritizing and sequencing their implementation, identifying robust means for extrapolation, and applying this understanding to other small to midsize communities across the nation. The Drive Electric Vermont Program was formed in 2012 with a goal of increasing the use of electrified transportation in Vermont through policy development, education and outreach, and infrastructure development. The Drive Electric Vermont Program can be broadly broken into four components: (1) strategic planning/leadership, (2) stakeholder/partnership development, (3) education and outreach, and (4) incentives. The early phases of the program focused heavily on strategic planning, and stakeholder and partnership development, followed by a transition to education and outreach activities, charging infrastructure development, and grant and incentive programs

  18. Roadmaster Roading Contractors Case Study

    Directory of Open Access Journals (Sweden)

    Hazel Taylor

    1999-01-01

    Full Text Available Systems analysis students seldom experience the practical difficulties of the initial investigation into a client’s requirements. They get little chance to practice the skills they need to investigate complex and confused problem situations, or to appreciate the wider organizational issues that can impact on a situation. This teaching case is designed to give students the opportunity to practice and apply investigation skills and to challenge them to consider the wider work environment when considering possible solutions to a problem situation. The case is conducted as a role-play, with students acting as systems analysts and teaching staff role-playing the clients. The students develop a report analyzing the client’s situation based on the issues that arise during the interviews. Feed-back sessions focus on discussing how well the students applied various interviewing strategies previously covered in lectures, and on the wider organizational problems that could impact proposed information system solutions.

  19. Bioremediation case studies: Abstracts. Final report

    International Nuclear Information System (INIS)

    Devine, K.

    1992-03-01

    The report contains abstracts of 132 case studies of bioremediation technology applied to hazardous waste clean-up. It was prepared to compile bioremediation studies in a variety of locations and treating diverse contaminants, most of which were previously undocumented. All data are based on vendor-supplied information and there was no opportunity to independently confirm its accuracy. These 132 case studies, from 10 different biotechnology companies, provide users with reference information about on-going and/or completed field applications and studies. About two-thirds of the cases were at full-scale clean-up level with the remainder at pilot or laboratory scale. In 74 percent of the cases, soil was at least one of the media treated. Soil alone accounts for 46 percent of the cases. Petroleum-related wastes account for the largest contaminant with 82 cases. Thirty-one states are represented in the case studies

  20. Liverpool Telecare Pilot: case studies

    Directory of Open Access Journals (Sweden)

    Nigel Barnes

    2006-09-01

    Full Text Available Telecare services use information and communications technology (ICT to support the provision of care to people in their own homes. This paper describes a pilot telecare service employed by Liverpool (UK City Council to support a sample of their frail and elderly social services users. The pilot has been running for over two years and has been deployed for 21 individuals in Liverpool. In this paper we present the pilot system and provide real example cases which help to illustrate the benefits of such a system.

  1. Associative Visual Agnosia: A Case Study

    OpenAIRE

    Charnallet, A.; Carbonnel, S.; David, D.; Moreaud, O.

    2008-01-01

    We report a case of massive associative visual agnosia. In the light of current theories of identification and semantic knowledge organization, a deficit involving both levels of structural description system and visual semantics must be assumed to explain the case. We suggest, in line with a previous case study [1], an alternative account in the framework of (non abstractive) episodic models of memory [4].

  2. Associative visual agnosia: a case study.

    Science.gov (United States)

    Charnallet, A; Carbonnel, S; David, D; Moreaud, O

    2008-01-01

    We report a case of massive associative visual agnosia. In the light of current theories of identification and semantic knowledge organization, a deficit involving both levels of structural description system and visual semantics must be assumed to explain the case. We suggest, in line with a previous case study, an alternative account in the framework of (non abstractive) episodic models of memory.

  3. Study on Case Teaching of Financial Management

    Science.gov (United States)

    Che, Zhenghong; Che, Zhengmei

    2011-01-01

    Case teaching is an efficient teaching method of management. It plays an important role to enhance the students' ability to practice the theory. However, case teaching of financial management has not achieved the expected results. The paper aims to study the importance, characteristics and corresponding methods of case teaching method of financial…

  4. Case Study of the NENE Code Project

    National Research Council Canada - National Science Library

    Kendall, Richard; Post, Douglass; Mark, Andrew

    2007-01-01

    ...) Program is sponsoring a series of case studies to identify the life cycles, workflows, and technical challenges of computational science and engineering code development that are representative...

  5. How To Set Up Your Own Small Business. Service Company Case Study. Manufacturing Firm Case Study. Retail Store Case Study.

    Science.gov (United States)

    Fallek, Max

    This collection of case studies is intended for use in a course in setting up a small business. The first, a case study of the process of setting up a service company, covers analyzing the pros and cons of starting one's own business, assessing the competition and local market, and selecting a site for and financing the business. The principal…

  6. Case studies in conservation science

    Science.gov (United States)

    Bisulca, Christina

    The research presented in this dissertation covers three separate topics of conservation as defined by the National Science Foundation: 1) Materials Stabilization, Strengthening, Monitoring, and Repair; 2. Understanding Material Degradation and Aging; and 3) Materials and Structural Characterization of Cultural Heritage Objects (the 'technical study'). The first topic is addressed through a study to assess the consolidant tetraethoxysilane for the stabilization of alum treated wood. Falling under materials degradation studies is a study published in American Museum Novitates to understand how environmental conditions affect the aging of fossil resins from five different deposits. Two separate studies are included in technical study of cultural heritage objects which comprises the third research area of materials characterization. The first is a survey of red dyes used in Chinese paintings from the Ming Dynasty to the Early Republic (1364-1911). The second is a study of the pigments, dyes and binders used in Hawaiian barkcloth (kapa) from the 19th century.

  7. CO2 Capture and Crystallization of Ammonia Bicarbonate in a Lab-Scale Scrubber

    Directory of Open Access Journals (Sweden)

    Pao Chi Chen

    2018-01-01

    Full Text Available A lab-scale bubble-column scrubber is used to capture CO2 gas and produce ammonia bicarbonate (ABC using aqueous ammonia as an absorbent under a constant pH and temperature. The CO2 concentration is adjusted by mixing N2 and CO2 in the range of 15–60 vol % at 55 °C. The process variables are the pH of the solution, temperature, gas-flow rate and the concentration of gas. The effects of the process variables on the removal efficiency (E, absorption rate (RA and overall mass-transfer coefficient (KGa were explored. A multiple-tube mass balance model was used to determine RA and KGa, in which RA and KGa were in the range of 2.14 × 10−4–1.09 × 10−3 mol/(s·L and 0.0136–0.5669 1/s, respectively. Results found that, RA showed an obvious increase with the increase in pH, inlet gas concentration and gas temperature, while KGa decreased with an increase in inlet gas concentration. Using linear regression, an empirical expression for KGa/E was obtained. On the other hand, ammonia bicarbonate crystals could be produced at a pH of 9.5 when the gas concentration was higher than 30% and γ (=Fg/FA, the gas-liquid molar flow rate ratio ≥ 1.5.

  8. Algal Turf Scrubbers: Cleaning Water while Capturing Solar Energy for Bio fuel Production

    International Nuclear Information System (INIS)

    Jeffrey Bannon, J.; Adey, W.

    2010-01-01

    Algal Turfs are bio diverse communities of unicellular to filamentous algae of all major algal phyla. Algal Turf Scrubbers (ATS) are bioengineered ecosystems dominated by algal turfs. They clean water to very high quality, and remove CO 2 from the atmosphere by capturing solar energy at rates 10 times that of agriculture and 50 times that of forestry. Since they are controlled ecosystems, using local algae, ATS does not suffer the major disadvantages of agricultural crops, which for maximum efficiency require fertilizers, herbicides and pesticides. ATS removes CO 2 from water and the atmosphere, and can be configured to remove CO 2 from power plant stack gases. As a normal part of operations, ATS removes heavy metals, break down toxic hydrocarbons, and oxygenates treated waters. ATS systems are capable of removing nitrogen and phosphorous from surface waters in the mid latitude US at $0.60/kg and $10.60/kg respectively (10% of the cost certified by the Chesapeake Bay Commission), and independently producing an energy product at $0.85/gallon. Given a nutrient credit system for rewarding nutrient removal from rivers and lakes, this price can be driven down to below $.40/gallon. Conservatively ATS can produce the equivalent of US imported oil on less than 30 M acres of land along major rivers

  9. Using Case Studies to Teach Courtesy Strategies.

    Science.gov (United States)

    Moore, Patrick

    1990-01-01

    Explains some courtesy techniques that technical professionals can use to deal with interpersonal problems that arise in writing situations. Presents three case studies with sample responses to show how case studies can teach these courtesy strategies to technical writing students. (MM)

  10. A Comparative Comment on the Case Studies

    DEFF Research Database (Denmark)

    Kjeldsen, Christian Christrup; Ley, Thomas; Jensen, Niels Rosendal

    2012-01-01

    Denne konklusion sammenfatter hovedtrækkene af de gennemførte case studies i WorkAble-projektet. Vigtige pointer er, at unge på tværs af de forskellige case studies har vanskeligt ved at blive hørt og taget alvorligt. I stedet spises de af med "realistisk vejledning" eller dårlige uddannelses- og...

  11. Reverse logistics: A review of case studies

    NARCIS (Netherlands)

    Brito, de M.P.; Dekker, Rommert; Flapper, S.D.P.; Fleischmann, B.; Klose, A.

    2004-01-01

    This paper gives an overview of scientific literature that describes and discusses cases of reverse logistics activities in practice. Over sixty case studies are considered. Based on these studies we are able to indicate critical factors for the practice of reverse logistics. In addition we compare

  12. A Case Study of "Empathetic Teaching Artistry"

    Science.gov (United States)

    Risner, Doug

    2014-01-01

    This case study is one of twenty cases derived from Anderson and Risner's international study of teaching artists in dance, and theatre, which investigated participants' (n=172) artistic and academic preparation in dance, and theatre, initial entry into the teaching artist field, rewards, challenges, and obstacles in participants' work, artists'…

  13. The Danish National Case Study Report

    DEFF Research Database (Denmark)

    Brodersen, Søsser; Jørgensen, Michael Søgaard

    Three case studies from Danish science shops within the environmental field are analysed with respect to societal background, interaction between the involved actors and the societal impact of the co-operation. The report is one of the seven national case study reports from the EU...

  14. Outage management: A case study

    International Nuclear Information System (INIS)

    Haber, S.B.; Barriere, M.T.; Roberts, K.H.

    1992-01-01

    Outage management issues identified from a field study conducted at a two-unit commercial pressurized water reactor (PWR), when one unit was in a refueling outage and the other unit was at full power operation, are the focus of this paper. The study was conduced as part of the US Nuclear Regulatory Commission's (NRC) organizational factors research program, and therefore the issues to be addressed are from an organizational perspective. Topics discussed refer to areas identified by the NRC as critical for safety during shutdown operations, including outage planning and control, personnel stress, and improvements in training and procedures. Specifically, issues in communication, management attention, involvement and oversight, administrative processes, organizational culture, and human resources relevant to each of the areas are highlighted by example from field data collection. Insights regarding future guidance in these areas are presented based upon additional data collection subsequent to the original study

  15. Five case studies of multifamily weatherization programs

    Energy Technology Data Exchange (ETDEWEB)

    Kinney, L; Wilson, T.; Lewis, G. [Synertech Systems Corp. (United States); MacDonald, M. [Oak Ridge National Lab., TN (United States)

    1997-12-31

    The multifamily case studies that are the subject of this report were conducted to provide a better understanding of the approach taken by program operators in weatherizing large buildings. Because of significant variations in building construction and energy systems across the country, five states were selected based on their high level of multifamily weatherization. This report summarizes findings from case studies conducted by multifamily weatherization operations in five cities. The case studies were conducted between January and November 1994. Each of the case studies involved extensive interviews with the staff of weatherization subgrantees conducting multifamily weatherization, the inspection of 4 to 12 buildings weatherized between 1991 and 1993, and the analysis of savings and costs. The case studies focused on innovative techniques which appear to work well.

  16. A case study of Douala

    Indian Academy of Sciences (India)

    In this paper, demand of energy (heating/cooling) in the buildings is discussed in Douala, Cameroon. Daily data of the last 40 years coming from five weather stations of Cameroon have been studied. Some forecasts have been carried out with 14 GCM models, associated to three future climate scenarios B1, A2, and A1B.

  17. A chromite ore case study

    African Journals Online (AJOL)

    2009-05-15

    May 15, 2009 ... of Cr(VI). If this is true, it could have serious consequences for South African chromite mines and the local environment. ... study proved that the Cr(VI) content of chromite samples is .... used during pulvizising experiments was dried at 40ºC for 1 d ... This is the simplest Cr(VI) extraction method and is similar.

  18. Case Study on Quality Education

    Science.gov (United States)

    Habib, Zahida

    2011-01-01

    Quality of Education, especially at Primary level, is an important issue to be discussed at the International Forum. This study highlights the quality of primary education through a comparison of the quality of Community Model Schools and Govt. Girls Primary Schools in Pakistan. Community Model Schools were established under Girls Primary…

  19. Theoretical pluralism in psychoanalytic case studies.

    Science.gov (United States)

    Willemsen, Jochem; Cornelis, Shana; Geerardyn, Filip M; Desmet, Mattias; Meganck, Reitske; Inslegers, Ruth; Cauwe, Joachim M B D

    2015-01-01

    The aim of this study is to provide an overview of the scientific activity of different psychoanalytic schools of thought in terms of the content and production of case studies published on ISI Web of Knowledge. Between March 2013 and November 2013, we contacted all case study authors included in the online archive of psychoanalytic and psychodynamic case studies (www.singlecasearchive.com) to inquire about their psychoanalytic orientation during their work with the patient. The response rate for this study was 45%. It appears that the two oldest psychoanalytic schools, Object-relations psychoanalysis and Ego psychology or "Classical psychoanalysis" dominate the literature of published case studies. However, most authors stated that they feel attached to two or more psychoanalytic schools of thought. This confirms that the theoretical pluralism in psychoanalysis stretches to the field of single case studies. The single case studies of each psychoanalytic school are described separately in terms of methodology, patient, therapist, or treatment features. We conclude that published case studies features are fairly similar across different psychoanalytic schools. The results of this study are not representative of all psychoanalytic schools, as some do not publish their work in ISI ranked journals.

  20. Theoretical pluralism in psychoanalytic case studies

    Science.gov (United States)

    Willemsen, Jochem; Cornelis, Shana; Geerardyn, Filip M.; Desmet, Mattias; Meganck, Reitske; Inslegers, Ruth; Cauwe, Joachim M. B. D.

    2015-01-01

    The aim of this study is to provide an overview of the scientific activity of different psychoanalytic schools of thought in terms of the content and production of case studies published on ISI Web of Knowledge. Between March 2013 and November 2013, we contacted all case study authors included in the online archive of psychoanalytic and psychodynamic case studies (www.singlecasearchive.com) to inquire about their psychoanalytic orientation during their work with the patient. The response rate for this study was 45%. It appears that the two oldest psychoanalytic schools, Object-relations psychoanalysis and Ego psychology or “Classical psychoanalysis” dominate the literature of published case studies. However, most authors stated that they feel attached to two or more psychoanalytic schools of thought. This confirms that the theoretical pluralism in psychoanalysis stretches to the field of single case studies. The single case studies of each psychoanalytic school are described separately in terms of methodology, patient, therapist, or treatment features. We conclude that published case studies features are fairly similar across different psychoanalytic schools. The results of this study are not representative of all psychoanalytic schools, as some do not publish their work in ISI ranked journals. PMID:26483725

  1. Making a case for case studies in psychotherapy training

    DEFF Research Database (Denmark)

    Mackrill, Thomas Edward; Iwakabe, Shigeru

    2013-01-01

    articulated explicitly or researched systematically in spite of its cardinal importance. An analysis of the role of case studies in psychotherapy training is presented. Reading, watching, or hearing about cases can offer novice psychotherapists access to a closed world; access to psychological theory...... in action; access to whole courses of therapy; access to different approaches; access to significant moments; access to the therapeutic relationship; access to a wide range of client types; access to working in different contexts; and the opportunity of identifying with therapists and clients. Writing...

  2. Arctic bioremediation -- A case study

    International Nuclear Information System (INIS)

    Smallbeck, D.R.; Ramert, P.C.; Liddell, B.V.

    1994-01-01

    This paper discusses the use of bioremediation as an effective method to clean up diesel-range hydrocarbon spills in northern latitudes. The results of a laboratory study of microbial degradation of hydrocarbons under simulated arctic conditions showed that bioremediation can be effective in cold climates and led to the implementation of a large-scale field program. The results of 3 years of field testing have led to a significant reduction in diesel-range hydrocarbon concentrations in the contaminated area

  3. Schematic representation of case study research designs.

    Science.gov (United States)

    Rosenberg, John P; Yates, Patsy M

    2007-11-01

    The paper is a report of a study to demonstrate how the use of schematics can provide procedural clarity and promote rigour in the conduct of case study research. Case study research is a methodologically flexible approach to research design that focuses on a particular case - whether an individual, a collective or a phenomenon of interest. It is known as the 'study of the particular' for its thorough investigation of particular, real-life situations and is gaining increased attention in nursing and social research. However, the methodological flexibility it offers can leave the novice researcher uncertain of suitable procedural steps required to ensure methodological rigour. This article provides a real example of a case study research design that utilizes schematic representation drawn from a doctoral study of the integration of health promotion principles and practices into a palliative care organization. The issues discussed are: (1) the definition and application of case study research design; (2) the application of schematics in research; (3) the procedural steps and their contribution to the maintenance of rigour; and (4) the benefits and risks of schematics in case study research. The inclusion of visual representations of design with accompanying explanatory text is recommended in reporting case study research methods.

  4. Associative Visual Agnosia: A Case Study

    Directory of Open Access Journals (Sweden)

    A. Charnallet

    2008-01-01

    Full Text Available We report a case of massive associative visual agnosia. In the light of current theories of identification and semantic knowledge organization, a deficit involving both levels of structural description system and visual semantics must be assumed to explain the case. We suggest, in line with a previous case study [1], an alternative account in the framework of (non abstractive episodic models of memory [4].

  5. Case Study Methodology and Homelessness Research

    Directory of Open Access Journals (Sweden)

    Jill Pable

    2013-10-01

    Full Text Available This paper describes the potential suitability of case study methodology for inquiry with the homeless population. It references a research study that uses case study research method to build theory. This study's topic is the lived experience of destitute individuals who reside in homeless shelters, and explores the homeless shelter built environment's potential influence on resident satisfaction and recovery. Case study methodology may be appropriate because it explores real-life contextual issues that characterize homelessness and can also accommodate the wide range of homeless person demographics that make this group difficult to study in a generalized fashion. Further, case study method accommodates the need within research in this area to understand individualized treatments as a potential solution for homelessness.

  6. INTERIORITY - a prefab case study

    DEFF Research Database (Denmark)

    Hvejsel, Marie Frier

    Dealing with the general theme of domestic architectural quality, the PhD thesis ‘INTERIORITY’ takes its point of departure in the continuous and increasing need to improve our capability as architects to theoretically articulate the intangible concept of quality, and to reveal it through an active...... been motivated by the particular hypothesis that an introduction of the notion of interiority, as an ability of the spatial envelope itself to address the sensuous scale of furniture, unfolds a particular dual critical potential signifying our experience of domestic architectural quality: On the one......, tectonically. Hence, it has been a particular idea of the study to explore the relation between furniture, the spatial envelope itself, and its construct by using furniture as an architectural concept. Consequently, the thesis has specifically investigated whether this notion of interiority, describing...

  7. Case study on printed matter

    DEFF Research Database (Denmark)

    – how important are emissions of chemicals? J Clean Prod 17, 115 – 128. Larsen HF (2004). Assessment of chemical emissions in life cycle impact assessment - focus on low substance data availability and ecotoxicity effect indicators. Ph.D. Thesis, October 2004. Department of Manufacturing, Engineering...... and Management. Technical University of Denmark. http://www.tempo.ipl.dtu.dk/ipl/upload/publ/PhD-thesis-rev.pdf Figure 1 Comparison of weighted LCA profiles with or without chemical related impact categories included (percentage of total, milli-person-equivalents-targeted, mPET). The avoided energy consumptions...... global warming, acidification and nutrification. The studies focus on energy consumption including the emissions and impact categories related to energy. The chemical-related impact categories comprising ecotoxicity and human toxicity are not included at all or only to a limited degree. In this paper we...

  8. Antiphospholipid syndrome: A case study

    International Nuclear Information System (INIS)

    Davies, T.

    1998-01-01

    Full text: A forty-two-year-old male presented to the Royal Adelaide Hospital with symptoms of increasing shortness of breath, swelling in both ankles, petechial rash and blood in his sputum. Initial investigations showed cardiomegaly, right ventricular hypertrophy, patchy lung infiltrates, a platelet count of 1500 and a clotting time of 60 seconds. A V/Q scan indicated a high probability of pulmonary embolism. Further investigations showed that the patient was positive for lupus anticoagulant and cardiolipin antibodies. A diagnosis of primary antiphospholipid syndrome was made. The patient''s high risk of strokes and hemorrhaging prompted investigation by a 99 mTc-HMPAO brain scan. Further V/Q scans were performed to follow up the initial finding of multiple pulmonary embolism and a R-L shunt study was performed to investigate a left subclavian murmur. The patient was admitted for four weeks and began treatment which included cyclaphosphamide, corticosteroids and plasmaphoresis and was discharged when stable. Over the next six months he was re admitted three times for relapse of antiphospholipid syndrome. On his fourth admission he collapsed and died five hours after admission. Cause of death was due to cardiac arrhythmia secondary to severe right ventricular hypertrophy and dilation. The effects of antiphospholipid syndrome was believed to be responsible for this outcome

  9. Antiphospholipid syndrome: A case study

    Energy Technology Data Exchange (ETDEWEB)

    Davies, T. [Royal Adelaide Hospital, Adelaide, SA (Australia). Department of Nuclear Medicine

    1998-03-01

    Full text: A forty-two-year-old male presented to the Royal Adelaide Hospital with symptoms of increasing shortness of breath, swelling in both ankles, petechial rash and blood in his sputum. Initial investigations showed cardiomegaly, right ventricular hypertrophy, patchy lung infiltrates, a platelet count of 1500 and a clotting time of 60 seconds. A V/Q scan indicated a high probability of pulmonary embolism. Further investigations showed that the patient was positive for lupus anticoagulant and cardiolipin antibodies. A diagnosis of primary antiphospholipid syndrome was made. The patient``s high risk of strokes and hemorrhaging prompted investigation by a {sup 99}mTc-HMPAO brain scan. Further V/Q scans were performed to follow up the initial finding of multiple pulmonary embolism and a R-L shunt study was performed to investigate a left subclavian murmur. The patient was admitted for four weeks and began treatment which included cyclaphosphamide, corticosteroids and plasmaphoresis and was discharged when stable. Over the next six months he was re admitted three times for relapse of antiphospholipid syndrome. On his fourth admission he collapsed and died five hours after admission. Cause of death was due to cardiac arrhythmia secondary to severe right ventricular hypertrophy and dilation. The effects of antiphospholipid syndrome was believed to be responsible for this outcome.

  10. Music in context : Four case studies

    NARCIS (Netherlands)

    Randwijck, R.J.C. van

    2008-01-01

    In his thesis entitled “Music in Context. Four Case Studies”, R.J.C. van Randwijck investigates the context in which music has been created. It is a search in Four Case Studies, approaching four pieces of music from the context in which they were written in order to understand their meaning. The

  11. Case Study: A Separation of Powers Lesson.

    Science.gov (United States)

    Jenkins, Steve

    1986-01-01

    Presents a case study involving students in the issue of separation of powers as applied to the 1952 Immigration and Nationality Act. Students examine the case of Jagdish Rai Chadha, an immigrant threatened with deportation whose problems resulted in 1983 U.S. Supreme Court decision declaring legislative veto provision of Immigration and…

  12. Implementing Product Platforms: A Case Study

    DEFF Research Database (Denmark)

    Nielsen, Ole Fiil; Mortensen, Niels Henrik

    2006-01-01

    The paper describes a case study dealing with the process of creating and implementing a product platform. The paper espessially deals with the fact that to obtain the benefits of platforms a permanent change in behaviour in product development must be ensured. This change in behaviour requires...... acceptance and approval from the organisation in general and the commitment from management to enforce agreed-upon decisions. The case study itself was performed in the Danish company LEGO Group. The case study had two objectives: To create a technical architecture and align this architecture...

  13. Case Study: Mini-Case Studies: Small Infusions of Active Learning for Large-Lecture Courses

    Science.gov (United States)

    Carloye, Lisa

    2017-01-01

    In this article, the author introduces the usage of case studies to be an excellent method for engaging students through stories. The author notes she developed a series of mini-case studies that can be implemented, with a little advance preparation, within a 10- to 15-minute window during lecture. What makes them "mini" case studies?…

  14. Case-control studies in neurosurgery.

    Science.gov (United States)

    Nesvick, Cody L; Thompson, Clinton J; Boop, Frederick A; Klimo, Paul

    2014-08-01

    Observational studies, such as cohort and case-control studies, are valuable instruments in evidence-based medicine. Case-control studies, in particular, are becoming increasingly popular in the neurosurgical literature due to their low cost and relative ease of execution; however, no one has yet systematically assessed these types of studies for quality in methodology and reporting. The authors performed a literature search using PubMed/MEDLINE to identify all studies that explicitly identified themselves as "case-control" and were published in the JNS Publishing Group journals (Journal of Neurosurgery, Journal of Neurosurgery: Pediatrics, Journal of Neurosurgery: Spine, and Neurosurgical Focus) or Neurosurgery. Each paper was evaluated for 22 descriptive variables and then categorized as having either met or missed the basic definition of a case-control study. All studies that evaluated risk factors for a well-defined outcome were considered true case-control studies. The authors sought to identify key features or phrases that were or were not predictive of a true case-control study. Those papers that satisfied the definition were further evaluated using the Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) checklist. The search detected 67 papers that met the inclusion criteria, of which 32 (48%) represented true case-control studies. The frequency of true case-control studies has not changed with time. Use of odds ratios (ORs) and logistic regression (LR) analysis were strong positive predictors of true case-control studies (for odds ratios, OR 15.33 and 95% CI 4.52-51.97; for logistic regression analysis, OR 8.77 and 95% CI 2.69-28.56). Conversely, negative predictors included focus on a procedure/intervention (OR 0.35, 95% CI 0.13-0.998) and use of the word "outcome" in the Results section (OR 0.23, 95% CI 0.082-0.65). After exclusion of nested case-control studies, the negative correlation between focus on a procedure

  15. Design considerations for wet flue gas desulfurization systems - wet scrubber hardware issues

    Energy Technology Data Exchange (ETDEWEB)

    Hurwitz, H.

    1994-12-31

    About 20 years ago the first wet flue gas desulfurization systems installed on coal fired utility boilers in the United States were experiencing extreme operating problems. In addition to their failure to achieve the necessary SO{sub 2} removal efficiencies, these FGD systems required a major investment in maintenance, both material and labor, just to remain operational. These first generation systems demonstrated that a lack of understanding of the chemistry and operating conditions of wet flue gas desulfurization can lead to diastrous results. As the air pollution control industry developed, both in the United States and in Japan, a second generation of FGD systems was introduced. These designs incorporated major improvements in both system chemistry control and in the equipment utilized in the process. Indeed, the successful introduction of utility gas desulfurization systems in Germany was possible only through the transfer of the technology improvements developed in the US and in Japan. Today, technology has evolved to a third generation of wet flue gas desulfurication systems and these systems are now offered worldwide through a series of international licensing agreements. The rapid economic growth and development in Asia and the Pacific Rim combined with existing problems in ambient air quality in these same geographic areas, has resulted in the use of advanced air pollution control systems; including flue gas desulfurization both for new utility units and for many retrofit projects. To meet the requirements of the utility industry, FGD systems must meet high standards of reliability, operability and performance. Key components in achieving these objectives are: FGD System reliability/operability/performance; FGD system supplier qualifications; process design; equipment selection. This paper will discuss each of the essential factors with a concentration on the equipment selection and wet scrubber hardware issues.

  16. War And Reconstruction: Four Comparative Case Studies

    African Journals Online (AJOL)

    The four case studies are taken from four different continents, four different wars under .... and revolutionary changes in the structures and power relations in society and ..... general public accept nowadays that although states' rights were the ...

  17. BTS Case Study: The Galloway Family Home

    International Nuclear Information System (INIS)

    Brandegee Group

    1999-01-01

    Case study of an energy-efficient Habitat for Humanity house that uses 30% less energy than conventional residential construction. The project was part of the Jimmy Carter Work Project in rural Appalachia in 1997

  18. Abstracts of Remediation Case Studies, Volume 9

    Science.gov (United States)

    This report, published by the Federal Remediation Technologies Roundtable (FRTR), is a collection of recently published abstracts summarizing 13 cost and performance case studies on the use of remediation technologies at contaminated sites.

  19. Review of ORD Nanomaterial Case Studies Workshop

    Science.gov (United States)

    The following is a letter report from the Executive Committee of the BOSC concerning the review of the ORD Nanomaterial Case Studies Workshop: Developing a Comprehensive Environmental Assessment Research Strategy for Nanoscale Titanium Dioxide.

  20. Case Study: Pancreas cancer with Whipple's operation

    African Journals Online (AJOL)

    Keywords: pancreas cancer, Whipple procedure, SASPEN case study ..... Grade A. Grade B. Grade C. Nasogastric tube required. 4-7 days or reinserted > postoperative day 3 .... malabsorption and vitamin and mineral deficiencies are the most.

  1. Innovative Interpretive Qualitative Case Study Research Method ...

    African Journals Online (AJOL)

    lc2o

    The combined use of case study and systems theory is rarely discussed in the ... Scott, 2002), the main benefit of doing qualitative research is the patience ..... Teaching ICT to teacher candidates ... English Language Teachers. London: Arnold.

  2. Memory and Learning: A Case Study.

    Science.gov (United States)

    Webster, Raymond E.

    1986-01-01

    The usefulness of the Learning Efficency Test (LET), an approach to assessing the learning efficiency and short-term memory recall capacity in children, is described via a case study demonstrating the test's use to develop instructional strategies. (CL)

  3. Towards More Case Study Research in Entrepreneurship

    Directory of Open Access Journals (Sweden)

    Tom Duxbury

    2012-03-01

    Full Text Available Entrepreneurship as an emerging discipline has made good strides, but according to some, has fallen short of bringing its theory and literature up to the standards of others in the management sciences. Rich with the descriptive detail needed for insightful theory building in entrepreneurship, scholars have called for more case study research, particularly those incorporating non-retrospective and longitudinal observations. At the same time however, it has become rare to find such research published in A-level journals dedicated to entrepreneurship. A survey presented here of major entrepreneurship journals over the past six years revealed a publication rate of only 3% using the case study method. This presents a major impediment for developing fresh research in this field based upon the study of real cases. The author explores how the case study method has been applied to entrepreneurship research and provides recommendations for improved publication rates.

  4. Travel Efficiency Assessment Method: Three Case Studies

    Science.gov (United States)

    This slide presentation summarizes three case studies EPA conducted in partnership with Boston, Kansas City, and Tucson, to assess the potential benefits of employing travel efficiency strategies in these areas.

  5. Modalities of Generalization Through Single Case Studies.

    Science.gov (United States)

    Zittoun, Tania

    2017-06-01

    The value of case studies for theory building is still doubted in psychology. The paper argues for the importance of case studies and the possibility of generalizing from these for a specific sociocultural understanding of human development. The paper first clarifies the notion of abduction within case studies, drawing on pragmatists James and Peirce and expanding it with the work of Lewin, and argues that it is the core mechanism that allows generalization from case studies. The second section presents the possibility of generalizing from individual single case studies, for which not only the subjective perspective, but also the dynamics by which the social and cultural environment guide and enable the person's development, have to be accounted for. The third section elaborates the question of institutional case studies, where the challenge is to account both for institutional dynamics, and for persons' trajectories within; this is exemplified with an ongoing study on the process of obtaining citizenship in Switzerland. The paper briefly concludes by highlighting two possible implications of the paper, one concerning the process of theoretical reasoning, the other, the fact that sociocultural psychology could itself be seen as an institution in-the-making.

  6. Educational Potential of Case-Study Technology

    OpenAIRE

    Fedorinova, Zoya; Vorobeva, Victoria; Malyanova, Marina

    2015-01-01

    This article presents the results of phenomenological and typological analysis of case-study technology educational potential. The definition “educational potential of case-study technology” is given, the main characteristics of which are changed in communication and collaborative activity quality, appearance of educational initiatives, change of participants’ position in learning process, formation of “collective subject” in collaborative activity, increase of learning (subject) results. Dep...

  7. Performable Case Studies in Ethics Education.

    Science.gov (United States)

    Robeson, Richard; King, Nancy M P

    2017-09-12

    Bioethics education often includes the study of short stories, novels, plays, and films, because such materials present case examples that can highlight relevant issues and questions especially vividly for a wide range of students. In addition, creative writing is widely used in the education of health professional students and in continuing education settings for health professionals. There are very few academic or professional disciplines that do not use case studies, but the case study in dialogic form has not been standard practice for thousands of years. Dramatic arts casuistry-the creation and performance of short case studies designed specifically to raise bioethics issues for discussion-represents an application of literature and the medical humanities that is both unique and uniquely valuable. This essay describes the development and history of a course that has been successfully taught to medical students and graduate bioethics students, in which the class researches, writes, and performs a case study designed to elicit reflection and discussion about a topic and set of bioethics issues of current interest to both academic and general audiences. The model is also suited to the presentation and discussion of existing case studies, both live and via on-demand audio.

  8. A Case Study about Communication Strategies

    Science.gov (United States)

    Lin, Grace Hui Chin

    2011-01-01

    The primary purpose of this case study was to identify what were Taiwanese University English as a Foreign Language (EFL) learners' perceptions about learning communication strategies. This study collected qualitative data about students' beliefs and attitudes as they learned communication strategies. The research question guiding the study was:…

  9. Predicting Students Drop Out: A Case Study

    Science.gov (United States)

    Dekker, Gerben W.; Pechenizkiy, Mykola; Vleeshouwers, Jan M.

    2009-01-01

    The monitoring and support of university freshmen is considered very important at many educational institutions. In this paper we describe the results of the educational data mining case study aimed at predicting the Electrical Engineering (EE) students drop out after the first semester of their studies or even before they enter the study program…

  10. Case Study Research Methodology in Nursing Research.

    Science.gov (United States)

    Cope, Diane G

    2015-11-01

    Through data collection methods using a holistic approach that focuses on variables in a natural setting, qualitative research methods seek to understand participants' perceptions and interpretations. Common qualitative research methods include ethnography, phenomenology, grounded theory, and historic research. Another type of methodology that has a similar qualitative approach is case study research, which seeks to understand a phenomenon or case from multiple perspectives within a given real-world context.

  11. Case Study Report about Gender Impact Assessment

    DEFF Research Database (Denmark)

    Faber, Stine Thidemann; Agustin, Lise Rolandsen

    2013-01-01

    The aim of this national case study report is to take a closer look at the use of Gender Impact Assessments in Denmark in order to describe the Danish implementation of this specific Gender Mainstreaming method. By way of analyzing two selected cases (two law proposals put forward by The Danish...... Ministry of Employment and the Danish Ministry of Transport, respectively) the aim is to assess the transformative potential of GIA as it is performed in Denmark....

  12. Gigantic Suprapubic Lymphedema: A Case Study

    Directory of Open Access Journals (Sweden)

    Roozbeh Tanhaeivash

    2016-08-01

    Full Text Available We present the first case study of idiopathic gigantic suprapubic lymphedema and buried penis treated with puboscrotal reconstruction in a patient with initial extreme obesity after an extensive weight reduction (120 kg. Massive localized lymphedema of the suprapubic region should be differentiated from the scrotal type. Severe lymphedema could not resolve on its own and weight reduction does not seem to be helpful in such cases.

  13. Waste Treatment and Immobilization Plant U. S. Department of Energy Office of River Protection Submerged Bed Scrubber Condensate Disposition Project - 13460

    Energy Technology Data Exchange (ETDEWEB)

    Yanochko, Ronald M. [Washington River Protection Solutions, P.O. Box 850, Richland, Washington 99352 (United States); Corcoran, Connie [AEM Consulting, LLC, 1201 Jadwin Avenue, Richland, Washington 99352 (United States)

    2013-07-01

    The Hanford Waste Treatment and Immobilization Plant (WTP) will generate an off-gas treatment system secondary liquid waste stream [submerged bed scrubber (SBS) condensate], which is currently planned for recycle back to the WTP Low Activity Waste (LAW) melter. This SBS condensate waste stream is high in Tc-99, which is not efficiently captured in the vitrified glass matrix [1]. A pre-conceptual engineering study was prepared in fiscal year 2012 to evaluate alternate flow paths for melter off-gas secondary liquid waste generated by the WTP LAW facility [2]. This study evaluated alternatives for direct off-site disposal of this SBS without pre-treatment, which mitigates potential issues associated with recycling. This study [2] concluded that SBS direct disposal is a viable option to the WTP baseline. The results show: - Off-site transportation and disposal of the SBS condensate is achievable and cost effective. - Reduction of approximately 4,325 vitrified WTP Low Activity Waste canisters could be realized. - Positive WTP operational impacts; minimal WTP construction impacts are realized. - Reduction of mass flow from the LAW Facility to the Pretreatment Facility by 66%. - Improved Double Shell Tank (DST) space management is a benefit. (authors)

  14. Case Study Research: Foundations and Methodological Orientations

    Directory of Open Access Journals (Sweden)

    Helena Harrison

    2017-01-01

    Full Text Available Over the last forty years, case study research has undergone substantial methodological development. This evolution has resulted in a pragmatic, flexible research approach, capable of providing comprehensive in-depth understanding of a diverse range of issues across a number of disciplines. Change and progress have stemmed from parallel influences of historical transformations in approaches to research and individual researcher's preferences, perspectives, and interpretations of this design. Researchers who have contributed to the development of case study research come from diverse disciplines with different philosophical perspectives, resulting in a variety of definitions and approaches. For the researcher new to using case study, such variety can create a confusing platform for its application. In this article, we explore the evolution of case study research, discuss methodological variations, and summarize key elements with the aim of providing guidance on the available options for researchers wanting to use case study in their work. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1701195

  15. Collaborative Assessment: Middle School Case Study

    Science.gov (United States)

    Parkison, Paul T.

    2014-01-01

    Utilizing a participant observer research model, a case study of the efficacy of a collaborative assessment methodology within a middle school social studies class was conducted. A review of existing research revealed that students' perceptions of assessment, evaluation, and accountability influence their intrinsic motivation to learn. A…

  16. Case Studies in Library Computer Systems.

    Science.gov (United States)

    Palmer, Richard Phillips

    Twenty descriptive case studies of computer applications in a variety of libraries are presented in this book. Computerized circulation, serial and acquisition systems in public, high school, college, university and business libraries are included. Each of the studies discusses: 1) the environment in which the system operates, 2) the objectives of…

  17. Prader-Willi Disease: A Case Study.

    Science.gov (United States)

    Forbus, William R., III

    A case study focuses on the characteristics and physical management of a 15-year-old with Prader-Willi Syndrome, a birth defect associated with hypotonia, insatiable appetite, hypogonadism, central nervous system dysfunction, and abnormal growth and development . A literature review addresses studies dealing with behavior modification of obesity…

  18. CSER 90-006, addendum 1: Criticality safety control for source term reduction project in the scrubber glovebox of Building 232-Z. Revision 1

    International Nuclear Information System (INIS)

    Hess, A.L.

    1995-01-01

    This Criticality Safety Evaluation Report addendum extends the coverage of the original CSER (90-006) about dismantling the ductwork in 232-Z to include cleanout of the Scrubber Glovebox, with an estimated residual Pu holdup of less than 200 grams. For conservatism and containment considerations, the provisions about waste packaging and water exclusion from the original work are retained, even though it is not credible for the Scrubber Pu content to be made critical with water added (NDA gives about 1/3 a minimum critical mass)

  19. Mining Product Data Models: A Case Study

    Directory of Open Access Journals (Sweden)

    Cristina-Claudia DOLEAN

    2014-01-01

    Full Text Available This paper presents two case studies used to prove the validity of some data-flow mining algorithms. We proposed the data-flow mining algorithms because most part of mining algorithms focuses on the control-flow perspective. First case study uses event logs generated by an ERP system (Navision after we set several trackers on the data elements needed in the process analyzed; while the second case study uses the event logs generated by YAWL system. We offered a general solution of data-flow model extraction from different data sources. In order to apply the data-flow mining algorithms the event logs must comply a certain format (using InputOutput extension. But to respect this format, a set of conversion tools is needed. We depicted the conversion tools used and how we got the data-flow models. Moreover, the data-flow model is compared to the control-flow model.

  20. Cryostat design case studies, principles and engineering

    CERN Document Server

    2016-01-01

    This book enables the reader to learn the fundamental and applied aspects of practical cryostat design by examining previous design choices and resulting cryostat performance. Through a series of extended case studies the book presents an overview of existing cryostat design covering a wide range of cryostat types and applications, including the magnet cryostats that comprise the majority of the Large Hadron Collider at CERN, space-borne cryostats containing sensors operating below 1 K, and large cryogenic liquid storage vessels. It starts with an introductory section on the principles of cryostat design including practical data and equations. This section is followed by a series of case studies on existing cryostats, describing the specific requirements of the cryostat, the challenges involved and the design choices made along with the resulting performance of the cryostat. The cryostat examples used in the studies are chosen to cover a broad range of cryostat applications and the authors of each case are ...

  1. Clean Cities Case Study: Barwood Cab Fleet Study Summary

    International Nuclear Information System (INIS)

    Whalen, P.

    1999-01-01

    Barwood Cab Fleet Study Summary is the second in a new series called''Alternative Fuel Information Case Studies,'' designed to present real-world experiences with alternative fuels to fleet managers and other industry stakeholders

  2. Repurposing legacy data innovative case studies

    CERN Document Server

    Berman, Jules J

    2015-01-01

    Repurposing Legacy Data: Innovative Case Studies takes a look at how data scientists have re-purposed legacy data, whether their own, or legacy data that has been donated to the public domain. Most of the data stored worldwide is legacy data-data created some time in the past, for a particular purpose, and left in obsolete formats. As with keepsakes in an attic, we retain this information thinking it may have value in the future, though we have no current use for it. The case studies in this book, from such diverse fields as cosmology, quantum physics, high-energy physics, microbiology,

  3. Case studies in atomic collision physics

    CERN Document Server

    McDaniel, E W

    1974-01-01

    Case Studies in Atomic Physics III focuses on case studies on atomic and molecular physics, including atomic collisions, transport properties of electrons, ions, molecules, and photons, interaction potentials, spectroscopy, and surface phenomena. The selection first discusses detailed balancing in the time-dependent impact parameter method, as well as time-reversal in the impact parameter method and coupled state approximation. The text also examines the mechanisms of electron production in ion. Topics include measurement of doubly differential cross sections and electron spectra, direct Coul

  4. Financial Shenanigans : A Case Study in Malaysia

    OpenAIRE

    Ooi, Ki Wei

    2013-01-01

    This study investigates the financial shenanigan cases which subject to the enforcement actions by the Malaysian Securities Commission between 2006 and 2011 for alleged financial misreporting. The scope of this study includes the attempts used, causes and consequences of the financial shenanigans and the post-financial shenanigans recovery plans devised to turnaround the companies. This study finds that the most common attempt used by the sample companies is overstating the revenue, follows b...

  5. Financial Shenanigans : A Case Study of Nigeria

    OpenAIRE

    Onitilo, Nnenna Chidimma

    2015-01-01

    This study investigates the identified cases of financial shenanigans in between 2001 and 2009 in Nigeria. The scope of this study includes the identification of the common attempts and approaches used by companies and the motivations for financial shenanigans. A cross country comparison of the characteristics of the corporate reporting environments between Nigeria and Malaysia was also carried out. This study finds that the most common attempt used by the sample companies are majorly revenue...

  6. The role of radionuclide studies in emergency cases

    International Nuclear Information System (INIS)

    Nishimura, Tsunehiko; Hayashida, Kohei; Uehara, Toshiisa

    1982-01-01

    Radionuclide studies have been performed popularly because of its noninvasive and simple method recently. In this study, we applied this technique for the evaluation of emergency cases in cardiovascular diseases. There were 93 cases (1.5%) out of 6163 cases, done during 1981. The subjects were 34 cases of cardiac studies (9 cases of sup(99m)Tc-PYP myocardial imaging, 12 cases of thallium myocardial imaging, 13 cases of cardioangiography), 23 cases of peripheral diseases (12 cases of peripheral angiography, 11 cases of venography), 16 cases of pulmonary imaging, 10 cases of renal studies (6 cases of renal angiography, 9 cases of renal imaging) and 5 cases of brain angiography. These studies were proven to be useful clinically for the evaluation of emergency cases and follow-up studies. In the near future, ''emergency radionuclide studies'' would be benefit for the high-risk patients noninvasively. (author)

  7. STUDY OF 200 CASES OF PLEURAL FLUID

    Directory of Open Access Journals (Sweden)

    Ramakrishna R

    2016-09-01

    Full Text Available BACKGROUND We have studied 200 patients of pleural fluid presenting to our tertiary care centre. Presence of cases of pleural fluid is a common presentation both in pulmonary and extrapulmonary diseases. We analysed the patients having both exudates and transudates and studied the results. MATERIALS AND METHODS We selected patients above 20 years of age and classified the patients with pleural fluid as having transudates and exudates. We studied the causes of transudates and exudates. A total of 200 patients are studied in this prospective study. Diagnosis of pleural exudates is made on the basis of Light’s criteria, chest x-ray, pleural fluid analysis, CT scan in selected patients, sputum examination, bronchoscopy and bronchial washings. Moribund and non-cooperative patients and HIV positives were excluded from the study. RESULTS Among the 200 patients, 91% have exudates. 9% have transudates by Light’s criteria. Tuberculosis is the commonest cause of effusions (64.83% followed by malignancy (13.73% and sympneumonic or parapneumonic effusions (9.89%. Pleural effusions occurred predominantly in males. Prevalence of diabetes Mellitus among cases of tuberculous pleural effusions is 13.56%. Tuberculous effusions are predominantly right-sided. CONCLUSION Predominant cases of pleural fluid are exudates. Commonest cause of pleural effusion is Tuberculosis followed by malignancy both pulmonary and extrapulmonary and sym. and parapneumonic effusions. Prevalence of Diabetes among Tuberculous pleural effusion cases is more or less same as in general population. Cough, expectoration fever, chest pain and breathlessness are the common symptoms occurring in three fourths of the patients of tuberculous pleural effusion. Most of the cases of Tuberculous effusion are above 30 years of age. In the diagnosis of tuberculous pleural effusion, Pleural fluid ADA is very important. Pleural fluid cytology, pleural biopsy, bronchoscopy, bronchial washings and sputum

  8. A Codesign Case Study in Computer Graphics

    DEFF Research Database (Denmark)

    Brage, Jens P.; Madsen, Jan

    1994-01-01

    The paper describes a codesign case study where a computer graphics application is examined with the intention to speed up its execution. The application is specified as a C program, and is characterized by the lack of a simple compute-intensive kernel. The hardware/software partitioning is based...

  9. Effective communication. A Platonic case study

    NARCIS (Netherlands)

    Wakker, Gerry C.; Wieling, Martijn; Kroon, Martin; Van Noord, Gertjan

    As a contribution to the valedictory volume for John Nerbonne I present a case study of two thematically similar passages in Plato where I will make use of an analysis based on discourse cohesion and above all on the rhetorical and manipulative use of particles to show how a single (leading)

  10. The Danish National Case Study Report

    DEFF Research Database (Denmark)

    Brodersen, Søsser; Jørgensen, Michael Søgaard

    the projects so it fits into the university schedule, without leaving out the time perspective of the clients, and secure the research is applicable for the clients and based on their need for knowledge. The case studies have shown different roles of a Science Shop. All Science Shops have a role as mediator...

  11. Portfolio Manager Selection – A Case Study

    DEFF Research Database (Denmark)

    Christensen, Michael

    2017-01-01

    Within a delegated portfolio management setting, this paper presents a case study of how the manager selection process can be operationalized in practice. Investors have to pursue a thorough screening of potential portfolio managers in order to discover their quality, and this paper discusses how...

  12. Acoustical case studies of three green buildings

    Science.gov (United States)

    Siebein, Gary; Lilkendey, Robert; Skorski, Stephen

    2005-04-01

    Case studies of 3 green buildings with LEED certifications that required extensive acoustical retrofit work to become satisfactory work environments for their intended user groups will be used to define areas where green building design concepts and acoustical design concepts require reconciliation. Case study 1 is an office and conference center for a city environmental education agency. Large open spaces intended to collect daylight through clerestory windows provided large, reverberant volumes with few acoustic finishes that rendered them unsuitable as open office space and a conference room/auditorium. Case Study 2 describes one of the first gold LEED buildings in the southeast whose primary design concepts were so narrowly focused on thermal and lighting issues that they often worked directly against basic acoustical requirements resulting in sound levels of NC 50-55 in classrooms and faculty offices, crosstalk between classrooms and poor room acoustics. Case study 3 is an environmental education and conference center with open public areas, very high ceilings, and all reflective surfaces made from wood and other environmentally friendly materials that result in excessive loudness when the building is used by the numbers of people which it was intended to serve.

  13. Advanced supplier partnership practices: a case study.

    Science.gov (United States)

    Williams, B R

    2000-05-01

    This article describes how a supplier partnership was set up to avoid the typical purchasing relationship--price being inversely proportional to quantity and having the purchaser take all the risk of product obsolescence. The case study also describes how rate-based replenishment replaced time-based delivery, and how all these advantages were achieved at reduced administrative costs.

  14. Management in Virtual Environments. Case Studies

    OpenAIRE

    Mazurek, Grzegorz; Gembicki, Michał; Krzemień, Grzegorz; Przegalińska, Aleksandra K.; Starostka, Justyna; Skorulska, Karolina; Prystupa-Rządca, Kaja

    2015-01-01

    The following publication consists of 12 case studies, which encompass various aspects of the ICT impact on contemporary businesses, focusing – among other things – on such concepts as: crowdsourcing, the internet of things, design thinking, digital entertainment, e-commerce, online and off-line distribution or social media marketing. EEA, Norway Grants Anna Goryńska

  15. Teaching Business Intelligence through Case Studies

    Science.gov (United States)

    Pomykalski, James J.

    2015-01-01

    In teaching business students about the application and implementation of technology, especially involving business intelligence, it is important to discover that project success in enterprise systems development efforts often depend on the non-technological problems or issues. The focus of this paper will be on the use of multiple case studies in…

  16. Business Registration Reform Case Studies : Malaysia

    OpenAIRE

    Olaisen, John

    2009-01-01

    This collection of case studies describes experiences and draws lessons from varied business registration reform programs in economies in vastly different stages of development: Bulgaria, Estonia, Ireland, Madagascar, and Malaysia. Over the last twenty years, a number of countries have recognized the importance of smooth and efficient business start up procedures. A functioning business re...

  17. Predicting students drop out : a case study

    NARCIS (Netherlands)

    Dekker, G.W.; Pechenizkiy, M.; Vleeshouwers, J.M.; Barnes, T.; Desmarais, M.; Romero, C.; Ventura, S.

    2009-01-01

    The monitoring and support of university freshmen is considered very important at many educational institutions. In this paper we describe the results of the educational data mining case study aimed at predicting the Electrical Engineering (EE) students drop out after the first semester of their

  18. WP6 - The Ag2020 Case Studies

    DEFF Research Database (Denmark)

    Hansen, Jens G; Borch, Kristian; Trombi, Giacomo

    2010-01-01

    of the Future are presented. Finally, in section 1.4, is described the structure of the present report,which is firmly followed by the four case studies involved in the Project, namely the Rhodope Mountainous region in Bulgaria (CS1), The Kastelli region (Herakleion nomos) in Greece (CS2), the Central Denmark...

  19. case study of ramat park benin city

    African Journals Online (AJOL)

    user

    SETTLEMENT: CASE STUDY OF RAMAT PARK BENIN CITY. E. S. Okonofua1, R. ... region on a daily basis. The movement of ... with major road networks [2]. In order to ease ... led to series of research and development of traffic noise models.

  20. CASE STUDY – HIV AND LUNG DISEASE

    African Journals Online (AJOL)

    2011-04-02

    Apr 2, 2011 ... pathology deep to the paraseptal bullae. An intercostal drain tip is seen in the left lateral pleural space. Fig. 2. Axial computed tomography scan on lung windows. Large bilateral paraseptal bullae are demonstrated with residual antero-medial pneumothorax. 37. CASE STUDY – HIV AND LUNG DISEASE ...

  1. A Case Study of the Vredefort Dome

    African Journals Online (AJOL)

    South Africa became a signatory to and ratified the World Heritage Convention, 1972 (WHC) in 1997. It thereby voluntarily agreed to identify and conserve world heritage areas of universal value for the benefit of mankind. This article presents a case study of the Vredefort Dome, one of South Africa\\'s World Heritage Sites ...

  2. Climate wise case study compendium: Report 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    This case study compendium is one of several Climate Wise tools available to help interested companies identify cost-effective options. Climate Wise, a private-public partnership program, is a key Federal initiative to return greenhouse gas emissions to 1990 levels by 2000.

  3. Making Professional Development Flexible: A Case Study.

    Science.gov (United States)

    Forsyth, Rachel

    2002-01-01

    Presents a case study of an online course that was designed for staff professional development at Manchester Metropolitan University (United Kingdom). Discusses the flexibility of online courses; course design; activities for short online workshops; evaluation methods for course evaluation; and results of participant questionnaires. (LRW)

  4. Library Virtual Tours: A Case Study

    Science.gov (United States)

    Ashmore, Beth; Grogg, Jill E.

    2004-01-01

    Virtual tours delivered via the Web have become a common tool for both instruction and outreach. This article is a case study of the creation of a virtual tour for a university library and is intended to provide others interested in creating a virtual tour of their library the opportunity to learn from the mistakes and successes of fellow…

  5. Learning Machine Learning: A Case Study

    Science.gov (United States)

    Lavesson, N.

    2010-01-01

    This correspondence reports on a case study conducted in the Master's-level Machine Learning (ML) course at Blekinge Institute of Technology, Sweden. The students participated in a self-assessment test and a diagnostic test of prerequisite subjects, and their results on these tests are correlated with their achievement of the course's learning…

  6. Firefighter Workplace Learning: An Exploratory Case Study

    Science.gov (United States)

    Tracey, Edward A.

    2014-01-01

    Despite there being a significant amount of research investigating workplace learning, research exploring firefighter workplace learning is almost nonexistent. The purpose of this qualitative multi-case study was to explore how firefighters conceptualize, report, and practice workplace learning. The researcher also investigated how firefighters…

  7. Spicy Stonehenge : Proposing a SOA Case Study

    NARCIS (Netherlands)

    Espinha, T.A.; Chen, C.; Zaidman, A.E.; Gross, H.G.

    2012-01-01

    Prepint of paper published in: ICSE Workshop on Principles of Engineering Service Oriented Systems (PESOS), 4 June 2012; doi:10.1109/PESOS.2012.6225940 Maintenance research in the context of Service Oriented Architecture (SOA) is currently lacking a suitable standard case study that can be used by

  8. Collegiality in education: a case study

    African Journals Online (AJOL)

    Erna Kinsey

    This case study therefore investigated the effects of a collegial management style on teaching and learning ... resources cannot solely guarantee success at matriculation level. ... vily on school principals, their management teams and the governing .... may be necessary to employ the notion of building with a new member.

  9. It's Not Funny: A Case Study

    Science.gov (United States)

    Méndez-Morse, Sylvia

    2015-01-01

    This case study may be used with personnel supervision, school law, and other school leadership courses. It describes the behavior and actions of one teacher toward another. Student discussions can focus on supervision, workplace mobbing, workplace bullying, as well as sexual harassment. Students should focus on a school leader's role in such…

  10. Teaching the Holocaust through Case Study

    Science.gov (United States)

    Misco, Thomas

    2009-01-01

    This article responds to the curricular challenges teachers face with Holocaust education, including cursory treatments and a lack of focus on individual experiences. First, the author argues for a case-study approach to help students reengage concrete and complex features of the Holocaust as a point of departure for subsequent inquiry. In…

  11. A case study of Florida Road, Durban

    African Journals Online (AJOL)

    2006-06-29

    Jun 29, 2006 ... planning in mixed-use precincts: A case study of .... Technology, Faculty of Engineering and the Built Environment, Department of Town and Regional .... development process of contemporary cities. The origins of this realisation .... financing, and a lack of collaboration .... surrounded by a transport network,.

  12. Nanomaterial Case Studies: Nanoscale Titanium Dioxide ...

    Science.gov (United States)

    This draft document presents two case studies of nanoscale titanium dioxide (nano-TiO2) used (1) to remove arsenic from drinking water and (2) as an active ingredient in topical sunscreen. The draft case studies are organized around a comprehensive environmental assessment approach that combines a product life cycle framework with the risk assessment paradigm. The document does not draw conclusions about potential risks. Rather, the case studies are intended to help identify what needs to be known in order to conduct a comprehensive environmental assessment of the potential risks related to nano-TiO2. This draft document is part of a process that will inform the development of EPA’s research strategy to support nanomaterial risk assessments. The complex properties of various nanomaterials make evaluating them in the abstract or with generalizations difficult if not impossible. Thus, this document focuses on two specific uses of nano-TiO2, as a drinking water treatment and as topical sunscreen. These case studies do not represent completed or even preliminary assessments; rather, they present the structure for identifying and prioritizing research needed to support future assessments.

  13. Characterisation and comparison of case study findings

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Dorland, Jens; Pel, Bonno

    2015-01-01

    This report gives an overview and a comparative analysis of the findings from the 12 first case study reports in TRANSIT about aspects of transformative social innovation (TSI). Each of the 12 reports, on which the report is based, includes an analysis of a transnational social innovation network...

  14. Hydrocarbon storage caverns overhaul: A case study

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, N. [Bayer Inc., Sarnia, ON (Canada)

    1998-09-01

    Case studies of four hydrocarbon storage cavern overhauls by Bayer Inc., of Sarnia during the period 1993 to 1997 were reviewed and the lessons learned were discussed. Discussions included inspection requirements for each of the caverns, the logistics and planning plant production around the cavern outages, site and cavern preparation, including removal of the casing slips from the well heads. It was emphasized that cavern overhauls can be expensive operations, unless preceded by proper planning. The largest variable cost is likely to be rig time at about $ 2,000 per day. Planning for the unexpected with thoughtful contingencies can reduce costs and avoid expensive delays.

  15. Bench-scale treatability studies for simulated incinerator scrubber blowdown containing radioactive cesium and strontium

    International Nuclear Information System (INIS)

    Coroneos, A.C.; Taylor, P.A.; Arnold, W.D. Jr.; Bostick, D.A.; Perona, J.J.

    1994-12-01

    The purpose of this report is to document the results of bench-scale testing completed to remove 137 Cs and 90 Sr from the Oak Ridge K-25 Site Toxic Substances Control Act (TSCA) Incinerator blowdown at the K-25 Site Central Neutralization Facility, a wastewater treatment facility designed to remove heavy metals and uranium from various wastewaters. The report presents results of bench-scale testing using chabazite and clinoptilolite zeolites to remove cesium and strontium; using potassium cobalt ferrocyanide (KCCF) to remove cesium; and using strontium chloride coprecipitation, sodium phosphate coprecipitation, and calcium sulfate coprecipitation to remove strontium. Low-range, average-range, and high-range concentration blowdown surrogates were used to complete the bench-scale testing

  16. Synthesis across social innovation case studies

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Avelino, Flor; Dorland, Jens

    2016-01-01

    Part 1 is an overview and a comparative analysis of the findings from the 20 case study reports in TRANSIT about aspects of transformative social innovation (TSI). Each of the 20 reports, which the report is based on, includes an analysis of a transnational social innovation network and at least...... two local social innovation initiatives. Part 2 consists of extended abstracts of 8 papers which either focus on empirical phenomena surfacing in different TRANSIT cases (e.g. alternative economic arrangements), take a societal or methodological issue as starting point (e.g. inclusivity or research...... relations), address propositions from TRANSIT proto-theory (institutionalization dialectics, responses to crisis), build upon thematic clusters used for case selection (e.g. spaces for/of innovation, inclusive society, new economy, transformative science) or inductively develop specific sensitizing concepts...

  17. Neonatal appendicitis: a survival case study

    Directory of Open Access Journals (Sweden)

    Izabela Linha Secco

    Full Text Available ABSTRACT Objective: To report a case of neonatal appendicitis in a children’s hospital in southern Brazil, demonstrating the impact on neonatal survival. Method: Case study with data collection from medical records, approved by the Institution and Ethics Committee for Research with Human Beings. Results: The clinical picture is initially characterized by food intolerance, evolving to hypoactivity, alteration of vital signs and septicemia due to intestinal perforation. Management is exclusively surgical, since no case described in the literature was diagnosed preoperatively and the findings usually point to acute abdomen. Conclusion: A focused clinical surveillance should be established when the infant presents peritoneal irritation. Follow-up of the evolution and the worsening of the symptoms by nurses, as part of the care team in partnership with the medical team, enables an early surgical intervention, thereby avoiding complications such as septicemia and death.

  18. Case studies on selected natural food antioxidants

    OpenAIRE

    Herrero, Miguel; Mendiola, J. A.; Cifuentes, Alejandro; Ibáñez, Elena

    2013-01-01

    In this chapter, a broad description of several case studies related to common antioxidants found in food-related products is presented. In this regard, special attention is put on the novel advanced environmentally-friendly extraction methods nowadays employed to extract and purify those potent antioxidants from natural matrices. A brief description of these extraction processes is provided together with some of the instrumentation needed. Besides, the studies carried out so f...

  19. On robust analysis of paycheck: case study

    Directory of Open Access Journals (Sweden)

    Michal Uherek

    2011-01-01

    Full Text Available Many statistical tests are constructed to check the validity of normal distribution. Here we propose a case study on analysis of paycheck where we employ the RT class of tests for normality firstly introduced in Střelec, Stehlík (2008. In particular such a study can be of interest for pension funds theoreticians and practitioners, which study the transitions of pension systems from one social security state to the another one. Our study illustrates some possible distributional deviations of salary residuals on a real data.

  20. Vitiligo: A study of 120 cases

    Directory of Open Access Journals (Sweden)

    Kar P

    2001-11-01

    Full Text Available Vitiligo is a common pignientary disorder and of major social and cosmetic concern in India. Purpose of the study was to find out age at onset and sex incidence in vitiligo, role of hereditary factors and associations with other diseases. 120 self reporting vitiligo patients attending out patient department of a service hospital were selected for the study and this data was analysed. In the present series out of 120 cases 62 (51.6% were males and 58(48.35%were females. There was practically no difference in sex incidence. The lowest age of onset was two years and the oldest was 65 years. In the majority of patients,52(43.2%, disease started before twenty years of age.8 (6.6% cases gave definite family history of vitiligo. Exposed areas of the body were commonly affected in majority (66.6% of cases. The legs were commonest site of involvement in 60(50% cases. Circunicript type of vitiligo (46.6% was heading the list. Majority of patients (56.6% had multiple lesions. Diabetes mellitus was found in 2 (2.6% patients. Cause of vitiligo is still idiopathic. Hereditary factors hardly play any role in manifestation of vitiligo

  1. Description of dedusting in wet flue gas scrubbers with purposeful utilization of the secondary dispersion; Detailliertere Simulation der Staubabscheidung in Nasswaeschern durch Beruecksichtigung der Sekundaerdispersion

    Energy Technology Data Exchange (ETDEWEB)

    Feldkamp, M.; Lessmann, B.; Neumann, J.; Fahlenkamp, H. [Dortmund Univ. (Germany). Lehrstuhl Umwelttechnik

    2003-07-01

    Modern wet gas scrubbers are used in the power plant technology for the flue gas desulphurisation of coal-fired plants. For this the washing liquid is sprayed by numerous nozzles. The specific arrangement of the nozzles in several levels makes it possible for the spray to penetrate mutually. The penetration and overlapping of the spray in the wet scrubber causes the effect of secondary dispersion. This effect can be used effectively to improve the efficiency of the atomisation and to improve the absorption of the pollution gases in a flue gas desulphurisation scrubber. Analyses show that the cleaning efficiency of a wet scrubber depends on the distribution and the size of the drops. (orig.) [German] Moderne Gaswaescher werden in der Kraftwerkstechnik fuer die Rauchgasentschwefelung kohlebefeuerter Anlagen eingesetzt. Hierzu wird Waschfluessigkeit mit Hilfe zahlreicher Duesen zerstaeubt. Eine gezielte Anordnung der Duesen in mehreren Spruehebenen ermoeglicht es den Sprays der Duesen, sich gegenseitig zu durchdringen. Der Effekt der Sekundaerdisperson, der beim Ueberschneiden und Durchdringen der Sprays waehrend der Zerstaeubung im Rauchgaswaescher auftritt, laesst sich wirksam zur Verbesserung des Wirkungsgrades einer Rauchgasentschwefelungsanlage nutzen. Durchgefuehrte Untersuchungen zeigen, dass die Reinigungsleistung eines nassen REA-Waeschers von der Verteilung und der Groesse der Tropfen abhaengt. (orig.)

  2. Industry-Government-University Cooperative Research Program for the Development of Structural Materials from Sulfate-Rich FGD Scrubber Sludge

    Energy Technology Data Exchange (ETDEWEB)

    V. M. Malhotra; Y. P. Chugh

    2003-08-31

    The main aim of our project was to develop technology, which converts flue gas desulfurization (FGD) sulfate-rich scrubber sludge into value-added decorative materials. Specifically, we were to establish technology for fabricating cost effective but marketable materials, like countertops and decorative tiles from the sludge. In addition, we were to explore the feasibility of forming siding material from the sludge. At the end of the project, we were to establish the potential of our products by generating 64 countertop pieces and 64 tiles of various colors. In pursuit of our above-mentioned goals, we conducted Fourier transform infrared (FTIR) and differential scanning calorimetry (DSC) measurements of the binders and co-processed binders to identify their curing behavior. Using our 6-inch x 6-inch and 4-inch x 4-inch high pressure and high temperature hardened stainless steel dies, we developed procedures to fabricate countertop and decorative tile materials. The composites, fabricated from sulfate-rich scrubber sludge, were subjected to mechanical tests using a three-point bending machine and a dynamic mechanical analyzer (DMA). We compared our material's mechanical performance against commercially obtained countertops. We successfully established the procedures for the development of countertop and tile composites from scrubber sludge by mounting our materials on commercial boards. We fabricated more than 64 pieces of countertop material in at least 11 different colors having different patterns. In addition, more than 100 tiles in six different colors were fabricated. We also developed procedures by which the fabrication waste, up to 30-weight %, could be recycled in the manufacturing of our countertops and decorative tiles. Our experimental results indicated that our countertops had mechanical strength, which was comparable to high-end commercial countertop materials and contained substantially larger inorganic content than the commercial products. Our

  3. Rigour in qualitative case-study research.

    Science.gov (United States)

    Houghton, Catherine; Casey, Dympna; Shaw, David; Murphy, Kathy

    2013-03-01

    To provide examples of a qualitative multiple case study to illustrate the specific strategies that can be used to ensure the credibility, dependability, confirmability and transferability of a study. There is increasing recognition of the valuable contribution qualitative research can make to nursing knowledge. However, it is important that the research is conducted in a rigorous manner and that this is demonstrated in the final research report. A multiple case study that explored the role of the clinical skills laboratory in preparing students for the real world of practice. Multiple sources of evidence were collected: semi-structured interviews (n=58), non-participant observations at five sites and documentary sources. Strategies to ensure the rigour of this research were prolonged engagement and persistent observation, triangulation, peer debriefing, member checking, audit trail, reflexivity, and thick descriptions. Practical examples of how these strategies can be implemented are provided to guide researchers interested in conducting rigorous case study research. While the flexible nature of qualitative research should be embraced, strategies to ensure rigour must be in place.

  4. The Pendulum A Case Study in Physics

    CERN Document Server

    Baker, Gregory L

    2005-01-01

    The pendulum: a case study in physics is a unique book in several ways. Firstly, it is a comprehensive quantitative study of one physical system, the pendulum, from the viewpoint of elementary and more advanced classical physics, modern chaotic dynamics, and quantum mechanics. In addition, coupled pendulums and pendulum analogs of superconducting devices are also discussed. Secondly, this book treats the physics of the pendulum within a historical and cultural context,showing, for example, that the pendulum has been intimately connected with studies of the earth's density, the earth's motion,

  5. The Glioma International Case-Control Study

    DEFF Research Database (Denmark)

    Amirian, E. Susan; Armstrong, Georgina N; Zhou, Renke

    2016-01-01

    Decades of research have established only a few etiological factors for glioma, which is a rare and highly fatal brain cancer. Common methodological challenges among glioma studies include small sample sizes, heterogeneity of tumor subtypes, and retrospective exposure assessment. Here, we briefly...... describe the Glioma International Case-Control (GICC) Study (recruitment, 2010-2013), a study being conducted by the Genetic Epidemiology of Glioma International Consortium that integrates data from multiple data collection sites, uses a common protocol and questionnaire, and includes biospecimen...

  6. Case studies of nurseries in Malawi

    DEFF Research Database (Denmark)

    Namoto, M.; Likoswe, M.G.

    This study of 42 case studies of nurseries was made as part of a major sample survey of 360 nurseries in 6 districts in Malawi. The purpose of the study was to let the small nurseries in the country explain in their own words how they source seed, how and for whom they produce seedlings......, and to explain about their problems and opportunities in the nursery business. The assessment was made within the framework of Improved Seed Supply for Agroforestry in African Countries (ISSAAC), a Danida supported programme implemented in cooperation between Forest & Landscape Denmark and World Agroforestry...

  7. Management & Communication: Project Management Case Study

    CERN Multimedia

    Nathalie Dumeaux

    2004-01-01

    We are pleased to announce the recent launch of a new workshop on Project Management. This is designed for People with budgetary, scheduling and/or organizational responsibilities in a project or a sub-project. The objectives through a management case study specially suited to CERN are: to become familiar with modern management techniques in use for structuring, planning, scheduling, costing and progress monitoring of a project or a sub-project. to understand in-depth issues associated with Deliverable-oriented Project Management, Earned Value Management, Advanced Project Cost Engineering and Project Risk Management. The full description of this workshop can be found here. The next session will be held on 8 October 2004. If you are interested in this workshop, please contact Nathalie Dumeaux, email or 78144. Programme of Seminars October to December 2004 Situation : 21.09.2004 Séminaires bilingues Dates Jours Places disponibles Project Management Case study 8 October 1 oui Intr...

  8. Marketing and clinical trials: a case study

    Directory of Open Access Journals (Sweden)

    Entwistle Vikki A

    2007-11-01

    Full Text Available Abstract Background Publicly funded clinical trials require a substantial commitment of time and money. To ensure that sufficient numbers of patients are recruited it is essential that they address important questions in a rigorous manner and are managed well, adopting effective marketing strategies. Methods Using methods of analysis drawn from management studies, this paper presents a structured assessment framework or reference model, derived from a case analysis of the MRC's CRASH trial, of 12 factors that may affect the success of the marketing and sales activities associated with clinical trials. Results The case study demonstrates that trials need various categories of people to buy in – hence, to be successful, trialists must embrace marketing strategies to some extent. Conclusion The performance of future clinical trials could be enhanced if trialists routinely considered these factors.

  9. Marketing and clinical trials: a case study.

    Science.gov (United States)

    Francis, David; Roberts, Ian; Elbourne, Diana R; Shakur, Haleema; Knight, Rosemary C; Garcia, Jo; Snowdon, Claire; Entwistle, Vikki A; McDonald, Alison M; Grant, Adrian M; Campbell, Marion K

    2007-11-20

    Publicly funded clinical trials require a substantial commitment of time and money. To ensure that sufficient numbers of patients are recruited it is essential that they address important questions in a rigorous manner and are managed well, adopting effective marketing strategies. Using methods of analysis drawn from management studies, this paper presents a structured assessment framework or reference model, derived from a case analysis of the MRC's CRASH trial, of 12 factors that may affect the success of the marketing and sales activities associated with clinical trials. The case study demonstrates that trials need various categories of people to buy in - hence, to be successful, trialists must embrace marketing strategies to some extent. The performance of future clinical trials could be enhanced if trialists routinely considered these factors.

  10. Macroprudential Insurance Regulation: A Swiss Case Study

    Directory of Open Access Journals (Sweden)

    Philippe Deprez

    2016-12-01

    Full Text Available This article provides a case study that analyzes national macroprudential insurance regulation in Switzerland. We consider an insurance market that is based on data from the Swiss private insurance industry. We stress this market with several scenarios related to financial and insurance risks, and we analyze the resulting risk capitals of the insurance companies. This stress-test analysis provides insights into the vulnerability of the Swiss private insurance sector to different risks and shocks.

  11. Macroprudential Insurance Regulation: A Swiss Case Study

    OpenAIRE

    Philippe Deprez; Mario V. Wüthrich

    2016-01-01

    This article provides a case study that analyzes national macroprudential insurance regulation in Switzerland. We consider an insurance market that is based on data from the Swiss private insurance industry. We stress this market with several scenarios related to financial and insurance risks, and we analyze the resulting risk capitals of the insurance companies. This stress-test analysis provides insights into the vulnerability of the Swiss private insurance sector to different risks and sho...

  12. Concentrated Photo Voltaics (CPV: a case study

    Directory of Open Access Journals (Sweden)

    Centro S.

    2015-01-01

    Full Text Available Concentrated PhotoVoltaic (CPV, among green energy solutions, nowadays has the ambition to reach grid-parity without subside. CPV substitutes large areas of expensive semiconductor solar cells, with concentrating optics made of cheap materials. Moreover the cells that are suitable for CPV exhibits an unprecedented efficiency and their technology is progressing every year. A case study project, TwinFocus®, will be presented in detail.

  13. Prototype Development and Redesign: A Case Study

    Science.gov (United States)

    1990-03-01

    deal with difficult problems of leadership , strategy and management." [Ref. 10:p. 1] Admiral Turner feels that using the case study method "will help...placement officer was a Lieutenant Commander or Commander. Often times they came from leadership positions of executive officer equivalence. They were...ting power. Personnel within the computer organizatin who are used to manual methods and potential users of the system are resisting the change and

  14. Marketing and clinical trials: a case study

    OpenAIRE

    Entwistle Vikki A; Snowdon Claire; Garcia Jo; Knight Rosemary C; Shakur Haleema; Elbourne Diana R; Roberts Ian; Francis David; McDonald Alison M; Grant Adrian M; Campbell Marion K

    2007-01-01

    Abstract Background Publicly funded clinical trials require a substantial commitment of time and money. To ensure that sufficient numbers of patients are recruited it is essential that they address important questions in a rigorous manner and are managed well, adopting effective marketing strategies. Methods Using methods of analysis drawn from management studies, this paper presents a structured assessment framework or reference model, derived from a case analysis of the MRC's CRASH trial, o...

  15. Private power financing: a case study

    International Nuclear Information System (INIS)

    Stocker, Albert

    1991-01-01

    The Public Utility Regulatory Power Act (PURPA) in the USA and the UK's Electricity Act passed in 1989 are discussed and the first UK private power project is considered. A case study is presented, and covers the questions of when to approach the bank; banker versus investment bank; project fundamentals; the sponsor and the management team; the strength of the key project agreements; syndication of the project debt; and bank support during construction and operation. (author)

  16. Shuttle Transportation System Case-Study Development

    Science.gov (United States)

    Ransom, Khadijah

    2012-01-01

    A case-study collection was developed for NASA's Space Shuttle Program. Using lessons learned and documented by NASA KSC engineers, analysts, and contractors, decades of information related to processing and launching the Space Shuttle was gathered into a single database. The goal was to provide educators with an alternative means to teach real-world engineering processes and to enhance critical thinking, decision making, and problem solving skills. Suggested formats were created to assist both external educators and internal NASA employees to develop and contribute their own case-study reports to share with other educators and students. Via group project, class discussion, or open-ended research format, students will be introduced to the unique decision making process related to Shuttle missions and development. Teaching notes, images, and related documents will be made accessible to the public for presentation of Space Shuttle reports. Lessons investigated included the engine cutoff (ECO) sensor anomaly which occurred during mission STS-114. Students will be presented with general mission infom1ation as well as an explanation of ECO sensors. The project will conclude with the design of a website that allows for distribution of information to the public as well as case-study report submissions from other educators online.

  17. Capturing Cultural Glossaries: Case-study II

    Directory of Open Access Journals (Sweden)

    Matete Madiba

    2011-10-01

    Full Text Available

    ABSTRACT: This case-study attempts to present a brief glossary of Northern Sotho medical terms. It is a follow-up of a similar case-study (Madiba, Mphahlele and Kganyago 2003, which was an attempt to capture and present Northern Sotho cooking terms. Case-study I consists of the names for utensils, ingredients and the processes involved in the preparation of cultural dishes. With both these case-studies, the intention has been to use the opportunities availing themselves for the pres-ervation and valorisation of Northern Sotho, including the extension of its corpora to support national dictionary-making processes. The case-study methodology has been very useful for the purposes of this project and the context within which it was undertaken. It aims to provide a model for the collection and presentation of authentic Northern Sotho terminology which otherwise would hardly have been accessible.

    Keywords: CULTURAL GLOSSARY, INDIGENOUS KNOWLEDGE SYSTEMS, CORPUS, OUTCOMES-BASED EDUCATION, ASSESSMENT CRITERIA, TRADITIONAL MEDICAL TERMS, COMMUNICATIVE APPROACH, STRUCTURAL APPROACH, METONYMY, HANDS-ON ACTIVITIES, TASK-BASED LEARNING

    *****

    OPSOMMING: Die totstandbrenging van kulturele woordversamelings: Ge-vallestudie II. Hierdie gevallestudie probeer om 'n beperkte woordelys van Noord-Sotho- mediese terme aan te bied. Dit is 'n voortsetting van 'n soortgelyke gevallestudie (Madiba, Mpha-hlele en Kganyago 2003 wat 'n poging was om Noord-Sothokookterme te versamel en aan te bied. Gevallestudie I bestaan uit die name van gereedskap, bestanddele, en die prosesse betrokke by die voorbereiding van kulturele geregte. Met altwee hierdie gevallestudies was die bedoeling om die geleenthede te gebruik wat hulleself aanbied vir die bewaring en bestendiging van Noord-Sotho, insluitende die uitbreiding van sy korpora om die nasionale woordeboeksamestellingsprosesse te ondersteun. Die gevallestudiemetodologie was baie nuttig vir die doeleindes van

  18. Physics in Industry: A Case Study

    Science.gov (United States)

    Pratt-Ferguson, Ben

    2007-10-01

    Often ignored and sometimes even considered ``black sheep'' by the university & government-lab physicists, many industrial physicists continue making valuable scientific contributions in diverse areas, from computer science to aero and thermo-dynamics, communications, mathematics, engineering, and simulation, to name a few. This talk will focus on what industrial physicists do, what preparations are beneficial to obtaining a first industrial job, and what the business environment is like for physicists. The case study will be that of the author, starting with undergraduate and graduate studies and continuing on to jobs in industry.

  19. Case studies in atomic collision physics

    CERN Document Server

    McDaniel, Earl Wadsworth

    1972-01-01

    Case Studies in Atomic Collision Physics II focuses on studies on the role of atomic collision processes in astrophysical plasmas, including ionic recombination, electron transport, and position scattering. The book first discusses three-body recombination of positive and negative ions, as well as introduction to ionic recombination, calculation of the recombination coefficient, ions recombining in their parent gas, and three-body recombination at moderate and high gas-densities. The manuscript also takes a look at precision measurements of electron transport coefficients and differential cr

  20. Nanomaterial Case Studies: Nanoscale Titanium Dioxide in ...

    Science.gov (United States)

    EPA announced the availability of the final report, Nanomaterial Case Studies: Nanoscale Titanium Dioxide in Water Treatment and in Topical Sunscreen. This report is a starting point to determine what is known and what needs to be known about selected nanomaterials as part of a process to identify and prioritize research to inform future assessments of the potential ecological and health implications of these materials. Two specific applications of nanoscale titanium dioxide (nano-TiO2) are considered: (1) as an agent for removing arsenic from drinking water; and (2) as an active ingredient in topical sunscreen. These case studies are organized around a comprehensive environmental assessment (CEA) framework that combines a product life cycle perspective with the risk assessment paradigm. They are intended to help identify what may need to be known in order to conduct a comprehensive environmental assessment of the potential risks related to nano-TiO2. These “case studies” do not represent completed or even preliminary assessments, nor are they intended to serve as a basis for risk management decisions in the near term on these specific uses of nano TiO2. Rather, the intent is to use this document in developing the scientific and technical information needed for future assessment efforts.

  1. A Case Study in Corporate Social Responsibility

    Directory of Open Access Journals (Sweden)

    Sharon K. Kendrick

    2014-03-01

    Full Text Available This case study promotes analysis through a brief investigation into the role of corporate social responsibility (CSR in the operation of a multinational corporation as evidenced by Google, Inc. The study focuses on a transnational company in order to observe the impact of CSR practice on a global level. The study will present implications of CSR for corporate management, corporate employees, state regulators, shareholders, and customers in general. In addition, the study will discuss consequences of poor CSR compliance for a multinational corporation. Questions for analysis include implications of CSR, employee retention, development of corporate culture, and evaluation of advantages and disadvantages of different CSR approaches. Upon conclusion of the study, suggestions are made for future collaborative efforts in corporate social responsibility as applied to psychological, sociological, and economical motives. Recruiting and training possibilities also present partnership opportunities for best practice sharing in regards to community, civic, and service engagement.

  2. Terahertz applications in cultural heritage: case studies

    Science.gov (United States)

    Giovannacci, D.; Martos-Levif, D.; Walker, G. C.; Menu, M.; Detalle, V.

    2013-11-01

    Terahertz (THz) spectroscopy and imaging is a non-destructive, non-contact, non-invasive technology emerging as a tool for the analysis of cultural heritage. THz Time Domain Spectroscopy (TDS) techniques have the ability to retrieve information from different layers within a stratified sample, that enable the identification of hidden sub-layers in the case of paints and mural paintings. In this paper, we present the THz TDS2 system developed in the European Commission's 7th Framework Program project CHARISMA [grant agreement no. 228330]. Bespoke single processing algorithms; including a deconvolution algorithm can be deployed to increase the resolution and the global performance of the system. The potential and impact of this work is demonstrated through two case studies of mural paintings, where the capability to reveal the stratigraphy of the artworks is demonstrated.

  3. The case study of biomaterials and biominerals

    Science.gov (United States)

    Del Hoyo Martínez, Carmen

    2013-04-01

    The teaching of biomaterials as case study by on-line platform , susceptible to develop both individually and in groups, got different objectives proposed by the European Higher Education System, among which include: participate actively in the teaching-learning process by students, interpreting situations, adapt processes and solutions. It also improves oral and written communication, analytical skills and synthesis and also the ability to think critically. Biomaterials have their origin in biominerals. These are solid inorganic compounds of defined structure, consisting of molecular control mechanisms that operate in biological systems. Its main functions are: structural support, a reservoir of essential elements, sensors, mechanical protection and storage of toxic elements. Following the demand of materials compatible with certain functional systems of our body, developed biomaterials. Always meet the condition of biocompatibility. Should be tolerated by the body and do not provoke rejection. This involves a comprehensive study of physiological conditions and the anatomy of the body where a biomaterial has to be implemented. The possibility of generating new materials from biominerals has a major impact in medicine and other fields could reach as geology, construction, crystallography, etc. While the study of these issues is in its infancy today, can be viewed as an impact on the art and future technology. Planning case study that students would prepare its report for discussion in subgroups. Occurs then the pooling of individual analysis, joint case discussion and adoption by the subgroup of a consensual solution to the problem. The teacher as facilitator and coordinator of the final case analysis, sharing leads to group-wide class and said the unanimous decision reached by the students and gives his opinion on the resolution of the case. REFERENCES D.P. Ausubel. Psicología Educativa. Un punto de vista cognoscitivo. Trillas. Ed. 1983. E.W. Eisner. Procesos

  4. Using Case Studies to Teach About Global Issues, Bali: A Case Study

    Science.gov (United States)

    Oswald, James M.

    1974-01-01

    The South Pacific island of Bali is used as a case study of overpopulation and food shortage. A brief description of the resources, the typical lifestyle of the Balinese farmer, and possible teaching techniques are given. (DE)

  5. Describing Case Study Method and Identifying the Factors that Contribute to the Successful Conduct of Case Studies

    OpenAIRE

    Ahmad H. Juma'h; Mustafa Cavus

    2001-01-01

    This article has attempted to describe case study, the limitations and critiques on case study methodology and how the proponents have responded to these. Our special focus have been on the debate on theory building from case study research, and a framework for conducting case study research as well as the factors for a successful case study research. The overall conclusion is that the case study has been inappropriately used to generate theories.

  6. Present status and problems of radionuclide studies in emergency cases

    International Nuclear Information System (INIS)

    Ogawa, Kiyoshi

    1983-01-01

    Scintigraphy is just right for diagnosing emergency cases due to its noninvasive and simple method, but emergency radionuclide studies have not become practical as a result of difficulty problems. Recently, nuclear medical devices have become easier to use in operations. It is become of this, that I have submitted this report regarding the problems of radionuclide studies in emergency cases. There were 101 cases (1.4 %) out of 7,310 cases for the year period Sept. 1981 - Aug. 1982. The studies consisted of 12 brain imaging cases, 9 plumonary imaging cases, 22 cardiac study cases (cardio-angiography cases 8, 99m-Tc-PYP myocardium imaging cases 12, 201-Tl myocardium imaging cases 2), 12 renal study cases, 11 G.I. blood loss cases, 35 peripheral angiography cases. In the near future, we will have to be ready to perform emergency radionuclide studies if the need arises. (author)

  7. Putting Words in Their Mouth: Writing Dialogue for Case Studies

    Science.gov (United States)

    Herreid, Clyde Freeman

    2018-01-01

    This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This issue discusses dialogue writing guidelines most relevant to case writing.

  8. Deep Attack Weapons Mix Study (DAWMS) Case Study

    National Research Council Canada - National Science Library

    Bexfield, James

    2001-01-01

    .... This report describes the process used to conduct the Deep Attack Weapons Mix Study (DAWMS) in 1995-1997. This case study focuses on the weapons being procured by the Services and whether a joint viewpoint would result in a more effective mix...

  9. Case-Control Studies - An Efficient Observational Study Design

    NARCIS (Netherlands)

    van Stralen, Karlijn J.; Dekker, Friedo W.; Zoccali, Carmine; Jager, Kitty J.

    2010-01-01

    Case-control studies are an efficient research method for investigating risk factors of a disease. The method involves the comparison of the odds of exposure in a patient group with that of the odds of exposure in a control group. As only a minority of the population is included in the study, less

  10. A Case Study Application Of Time Study Model In Paint ...

    African Journals Online (AJOL)

    This paper presents a case study in the development and application of a time study model in a paint manufacturing company. The organization specializes in the production of different grades of paint and paint containers. The paint production activities include; weighing of raw materials, drying of raw materials, dissolving ...

  11. Case studies in organic contaminant hydrogeology

    International Nuclear Information System (INIS)

    Baker, J.A.

    1989-01-01

    The effective management of domestic solid waste and hazardous, toxic, and radioactive waste is a major problem in the area of environmental geology and water sciences throughout the world. A series of case studies is presented of organic contaminants from both solid and hazardous waste disposal facilities to provide examples of these problems. The facilities were investigated to determine risks and liabilities before acquisition, to determine the site hydrogeologic conditions for design of appropriate groundwater monitoring plans, and/or to determine the potential for groundwater contamination. The case studies are of disposal facilities located in glacial tills, carbonaceous weathered clay soils, weathered shale, limestone bedrock, dolomite bedrock, and alluvial and sedimentary deposits. The results of these studies and investigations show certain relationships in the distribution of organic pollutants to the different geologic and hydrogeologic characteristics of each facility. In each of the four case studies, all 129 priority pollutants were analyzed in private wells and/or monitoring wells. The 31 volatile organic compounds (VOCs) of the priority pollutant list were the majority of organic compounds detected. When VOCs are found in groundwater impacted by disposal facilities, they are present in groups and tend to be distributed in patterns based on their relative concentrations. It is rare to find only one or two VOCs from facilities where leakage has been detected. The ethylenes and ethanes appear to be more prevalent and mobile than aromatic VOCs. The aromatics are restricted primarily to leachates and wastes and in monitoring wells located adjacent to facilities. 2 refs., 15 figs

  12. Mathematical modelling a case studies approach

    CERN Document Server

    Illner, Reinhard; McCollum, Samantha; Roode, Thea van

    2004-01-01

    Mathematical modelling is a subject without boundaries. It is the means by which mathematics becomes useful to virtually any subject. Moreover, modelling has been and continues to be a driving force for the development of mathematics itself. This book explains the process of modelling real situations to obtain mathematical problems that can be analyzed, thus solving the original problem. The presentation is in the form of case studies, which are developed much as they would be in true applications. In many cases, an initial model is created, then modified along the way. Some cases are familiar, such as the evaluation of an annuity. Others are unique, such as the fascinating situation in which an engineer, armed only with a slide rule, had 24 hours to compute whether a valve would hold when a temporary rock plug was removed from a water tunnel. Each chapter ends with a set of exercises and some suggestions for class projects. Some projects are extensive, as with the explorations of the predator-prey model; oth...

  13. Prayer Healing: A Case Study Research Protocol.

    Science.gov (United States)

    Kruijthoff, Dirk J; van der Kooi, Cornelis; Glas, Gerrit; Abma, Tineke A

    2017-01-01

    Context • Prayer healing is a common practice in many religious communities around the world. Even in the highly secularized Dutch society, cases of prayer healing are occasionally reported in the media, often generating public attention. There is an ongoing debate regarding whether such miraculous cures do actually occur and how to interpret them. Objective • The aim of the article was to present a research protocol for the investigation of reported cases of remarkable and/or unexplained healing after prayer. Design • The research team developed a method to perform a retrospective, case-based study of prayer healing. Reported prayer healings can be investigated systematically in accordance with a step-by-step methodology. The focus is on understanding the healing by studying it from multiple perspectives, using both medical judgment and patients' narratives collected by qualitative methods Setting • The study occurred at Vrije Universiteit (VU) and VU Medical Center (Amsterdam, Netherlands) as well as the general medical practice of the first author. Participants • Potential participants could be any individuals in the Netherlands or neighboring countries who claim to have been healed through prayer. The reports of healing came from multiple sources, including the research team's medical practices and their direct vicinities, newspaper articles, prayer healers, and medical colleagues. Outcome Measures • Medical data were obtained before and after prayer. Subsequently, a member of a research team and of a medical assessment committee made a standardized judgment that evaluated whether a cure was clinically remarkable or scientifically unexplained. The participants' experiences and insider perspectives were studied, using in-depth interviews in accordance with a qualitative research methodology, to gain insight into the perceptions and explanations of the cures that were offered by participants and by the members of the medical assessment committee. The

  14. Wind to Hydrogen in California: Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Antonia, O.; Saur, G.

    2012-08-01

    This analysis presents a case study in California for a large scale, standalone wind electrolysis site. This is a techno-economic analysis of the 40,000 kg/day renewable production of hydrogen and subsequent delivery by truck to a fueling station in the Los Angeles area. This quantity of hydrogen represents about 1% vehicle market penetration for a city such as Los Angeles (assuming 0.62 kg/day/vehicle and 0.69 vehicles/person) [8]. A wind site near the Mojave Desert was selected for proximity to the LA area where hydrogen refueling stations are already built.

  15. Case study: Bioremediation in the Aleutian Islands

    International Nuclear Information System (INIS)

    Steward, K.J.; Laford, H.D.

    1995-01-01

    This case study describes the design, construction, and operation of a bioremediation pile on Adak Island, which is located in the Aleutian Island chain. Approximately 1,900 m 3 of petroleum-contaminated soil were placed in the bioremediation pile. The natural bioremediation process was enhanced by an oxygen and nutrient addition system to stimulate microbial activity. Despite the harsh weather on the island, after the first 6 months of operation, laboratory analyses of soil samples indicated a significant (80%) reduction in diesel concentrations

  16. Reinforcement learning: Solving two case studies

    Science.gov (United States)

    Duarte, Ana Filipa; Silva, Pedro; dos Santos, Cristina Peixoto

    2012-09-01

    Reinforcement Learning algorithms offer interesting features for the control of autonomous systems, such as the ability to learn from direct interaction with the environment, and the use of a simple reward signalas opposed to the input-outputs pairsused in classic supervised learning. The reward signal indicates the success of failure of the actions executed by the agent in the environment. In this work, are described RL algorithmsapplied to two case studies: the Crawler robot and the widely known inverted pendulum. We explore RL capabilities to autonomously learn a basic locomotion pattern in the Crawler, andapproach the balancing problem of biped locomotion using the inverted pendulum.

  17. Case study of nuclear power planning

    International Nuclear Information System (INIS)

    Covarrubias, A.J.; Lane, J.A.

    1976-01-01

    An improved version of the computer programme WASP (Wien Automatic System Planning) is described by the example of a case study. The aim of an optimal power plant development within the economic development is reached over several steps the most important parameters of which are explained in detail. To use the method it is necessary to know and to describe the energy and electricity supply situation of the country referred to. The programme development described has proved to be good in use in an international frame. The IAEA offers its help to all prospected customers in their initial period with the programme WASP. (UA) [de

  18. Makerspaces in Engineering Education: A Case Study

    DEFF Research Database (Denmark)

    Jensen, Lasse Skovgaard; Özkil, Ali Gürcan; Mougaard, Krestine

    2016-01-01

    it by opening makerspaces and adopting elements of the Maker Movement in their offerings. This paper investigates how university driven makerspaces can affect engineering design and product development education trough a case study. We provide our findings based on interviews and data collected from educators......, students the administrative and workshop staff of the makerspace. The findings are used to outline the challenges in incorporating the offerings of makerspaces. By discussing these challenges we identify opportunities for turning university makerspaces into innovation hubs and platforms that can support...

  19. Russian Media Educators: Case Studies Portraits

    Directory of Open Access Journals (Sweden)

    Alexander Fedorov

    2013-01-01

    Full Text Available This article is devoted to case studies of the media education works of some well knowns Russian media educators. The analysis of media educational work of the famous Russian media educators leads us to the conclusion that media education in Russia is developing, building on the synthesis of the aesthetic, socio-cultural, and practical concepts, with a focus on the development of media competence of the audience, mainly school and youth. The enthusiasts of media education, even devoid of substantial public support for its innovative projects, achieve significant and meaningful results.

  20. Metrology in Pharmaceutical Industry - A Case Study

    International Nuclear Information System (INIS)

    Yuvamoto, Priscila D.; Fermam, Ricardo K. S.; Nascimento, Elizabeth S.

    2016-01-01

    Metrology is recognized by improving production process, increasing the productivity, giving more reliability to the measurements and consequently, it impacts in the economy of a country. Pharmaceutical area developed GMP (Good Manufacture Practice) requeriments, with no introduction of metrological concepts. However, due to Nanomedicines, it is expected this approach and the consequent positive results. The aim of this work is to verify the level of metrology implementation in a Brazilian pharmaceutical industry, using a case study. The purpose is a better mutual comprehension by both areas, acting together and governmental support to robustness of Brazilian pharmaceutical area. (paper)

  1. Myonecrosis in Sickle Cell Anemia: Case Study.

    Science.gov (United States)

    Turaga, Lalita Prabha; Boddu, Prajwal; Kipferl, Steve; Basu, Anupam; Yorath, Martin

    2017-01-30

    BACKGROUND Myonecrosis is one of the more poorly studied, painful manifestations of sickle cell crisis. Medical literature is sparse detailing the manifestations and management of such symptoms. In myonecrosis, red cells containing sickle hemoglobin become rigid, resulting in reduced blood flow and myonecrosis. CASE REPORT We present a case study of a patient in sickle cell crisis with an episode of acute pain and swelling to the intrinsic muscles of the foot as a prominent feature of the crises. Although muscle biopsy is considered the gold standard for the diagnosis of myositis or myonecrosis, a low intensity signal on T1 and high intensity signal on T2 at the affected muscle belly can be as conclusive as imaging studies. In an actively sickling patient any invasive intervention should be avoided as it can result in ischemic necrosis of the tissues, due to interruption of capillary flow in end-arteries. CONCLUSIONS Early recognition is critical in sickle cell disease management, allowing for prompt and aggressive fluid resuscitation which remains a cornerstone in the management of most sickle cell vaso-occlusive crises. In this instance, off loading the extremity and early fluid resuscitation resolved the pain and swelling and prevented myonecrosis.

  2. Case Study: Puttin' on the Ritz: How to Put Science into Cases

    Science.gov (United States)

    Herreid, Clyde Freeman

    2017-01-01

    There are multiple ways to put science into a case. This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's issue discusses different ways of presenting science in case studies.

  3. A postural `stressed` cerebral HMPAO case study

    Energy Technology Data Exchange (ETDEWEB)

    Williams, R.C.; Jost, G.M.; Bolitho, L.; Grantham, M. [Wangaratta District Hospital, VIC (Australia)

    1998-03-01

    Full text: This case study represents an example of the utility of postural hypoperfusion stressed HMPAO SPECT. An elderly woman of 78 with a long history of giddiness was referred to our laboratory for examination of possible cerebral ischaemia. She had recurrent dizzy episodes, sometimes posture related, over the past few years and had suffered several falls. Cerebral DSA revealed minimal disease. CT scans were reported as normal. Carotid duplex Doppler studies revealed bilateral plaque disease in the carotid bulbs extending to the origins of the ICAs which were not significant stenoses. Postural symptoms were induced by standing the patient up rapidly and HMPAO was administered at the same time. A SPECT scan of the brain was performed. Quantitative analysis showed a left to right decrease of 10.8% in the temporo-occipital area, 5.6% in the temporo-parietal area and 2.5% in the cerebellar and parietal areas. Images revealed moderately reduced tracer concentration in the left half of the cerebellum and the left occipital region extending as far forward as the temporo-parietal region A repeat HMPAO SPECT scan without stress was normal. This would appear to indicate reversible ischaemia in the left posterior region, and is consistent with the reported symptoms. This case illustrates the usefulness of HMPAO in the diagnosis of reversible cerebral ischaemia.

  4. Sacroiliac joint dysfunction: a case study.

    Science.gov (United States)

    Murray, William

    2011-01-01

    Pain is a widespread issue in the United States. Nine of 10 Americans regularly suffer from pain, and nearly every person will experience low back pain at one point in their lives. Undertreated or unrelieved pain costs more than $60 billion a year from decreased productivity, lost income, and medical expenses. The ability to diagnose and provide appropriate medical treatment is imperative. This case study examines a 23-year-old Active Duty woman who is preparing to be involuntarily released from military duty for an easily correctable medical condition. She has complained of chronic low back pain that radiates into her hip and down her leg since experiencing a work-related injury. She has been seen by numerous providers for the previous 11 months before being referred to the chronic pain clinic. Upon the first appointment to the chronic pain clinic, she has been diagnosed with sacroiliac joint dysfunction. This case study will demonstrate the importance of a quality lower back pain assessment.

  5. Delivering Online Examinations: A Case Study

    Directory of Open Access Journals (Sweden)

    John MESSING

    2004-07-01

    Full Text Available Delivering Online Examinations: A Case Study Jason HOWARTH John MESSING Irfan ALTAS Charles Sturt University Wagga Wagga-AUSTRALIA ABSTRACT This paper represents a brief case study of delivering online examinations to a worldwide audience. These examinations are delivered in partnership with a commercial online testing company as part of the Industry Master’s degree at Charles Sturt University (CSU. The Industry Master’s degree is an academic program for students currently employed in the IT industry. Using Internet Based Testing (IBT, these students are examined in test centres throughout the world. This offers many benefits. For example, students have the freedom of sitting exams at any time during a designated interval. Computer-based testing also provides instructors with valuable feedback through test statistics and student comments. In this paper, we document CSU’s use of the IBT system, including how tests are built and delivered, and how both human and statistical feedback is used to evaluate and enhance the testing process.

  6. Organisational culture and learning: a case study.

    Science.gov (United States)

    Bell, Elaine

    2013-11-01

    To explore the impact organisational cultures have on the learning experience of student nurses and identify the influencing factors. A case study approach was used. The single case being a Defence School of Health Care Studies (DSHCS) and the multiple units of analysis: student nurses, the lecturers and Student Standing Orders. An in depth three dimensional picture was achieved using multiple data collection methods: interview, survey, observation and document analysis. The findings suggest that the DSHCS is perceived to be a sub-culture within a dominant civilian learning culture. Generally, the students and staff believed that the DSHCS is an excellent learning environment and that the defence students overall are high achievers. The common themes that appeared from the data were image, ethos, environment, discipline, support, welfare and a civilian versus military way of thinking. The learning experience of defence student nurses is very positive and enhanced by the positive learning culture of the civilian Higher Educational Institution. The factors influencing a positive learning experience that can be impacted by the overarching culture are discipline, image, ethos of adult learning, support and welfare. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. A postural 'stressed' cerebral HMPAO case study

    International Nuclear Information System (INIS)

    Williams, R.C.; Jost, G.M.; Bolitho, L.; Grantham, M.

    1998-01-01

    Full text: This case study represents an example of the utility of postural hypoperfusion stressed HMPAO SPECT. An elderly woman of 78 with a long history of giddiness was referred to our laboratory for examination of possible cerebral ischaemia. She had recurrent dizzy episodes, sometimes posture related, over the past few years and had suffered several falls. Cerebral DSA revealed minimal disease. CT scans were reported as normal. Carotid duplex Doppler studies revealed bilateral plaque disease in the carotid bulbs extending to the origins of the ICAs which were not significant stenoses. Postural symptoms were induced by standing the patient up rapidly and HMPAO was administered at the same time. A SPECT scan of the brain was performed. Quantitative analysis showed a left to right decrease of 10.8% in the temporo-occipital area, 5.6% in the temporo-parietal area and 2.5% in the cerebellar and parietal areas. Images revealed moderately reduced tracer concentration in the left half of the cerebellum and the left occipital region extending as far forward as the temporo-parietal region A repeat HMPAO SPECT scan without stress was normal. This would appear to indicate reversible ischaemia in the left posterior region, and is consistent with the reported symptoms. This case illustrates the usefulness of HMPAO in the diagnosis of reversible cerebral ischaemia

  8. Scheduling job shop - A case study

    Science.gov (United States)

    Abas, M.; Abbas, A.; Khan, W. A.

    2016-08-01

    The scheduling in job shop is important for efficient utilization of machines in the manufacturing industry. There are number of algorithms available for scheduling of jobs which depend on machines tools, indirect consumables and jobs which are to be processed. In this paper a case study is presented for scheduling of jobs when parts are treated on available machines. Through time and motion study setup time and operation time are measured as total processing time for variety of products having different manufacturing processes. Based on due dates different level of priority are assigned to the jobs and the jobs are scheduled on the basis of priority. In view of the measured processing time, the times for processing of some new jobs are estimated and for efficient utilization of the machines available an algorithm is proposed and validated.

  9. Location of existing Case Studies on Open Education

    OpenAIRE

    Burke, Siobhan

    2014-01-01

    Members of the Open Education Special Interest Group have collected a selection of short case studies on Open Education. View all of the case studies at http://repository.alt.ac.uk/view/divisions/CaseStudies/ Location of existing Case Studies on Open Education: The following lists aims to capture and amalgamate the various different case study sources which have been created and developed within the UK around experiences of Open Educational Resources.

  10. The Effect of Using Case Studies in Business Statistics

    Science.gov (United States)

    Pariseau, Susan E.; Kezim, Boualem

    2007-01-01

    The authors evaluated the effect on learning of using case studies in business statistics courses. The authors divided students into 3 groups: a control group, a group that completed 1 case study, and a group that completed 3 case studies. Results evidenced that, on average, students whom the authors required to complete a case analysis received…

  11. On misunderstandings in connection with case-studies

    DEFF Research Database (Denmark)

    Flyvbjerg, Bent

    2005-01-01

    This article examines five common misunderstandings about case-study research: (1) Theoretical knowledge is more valuable than practical knowledge; (2) One cannot generalize from a single case, therefore the single case study cannot contribute to scientific development; (3) The case study is most...

  12. Stakeholders and Apart Hotels: Multiple Case Study

    Directory of Open Access Journals (Sweden)

    Elizabeth Kyoko Wada

    2012-09-01

    Full Text Available Means of accommodation involve a wide range of social actors and agents, as well as different business models. Management strategies in this sector have been increasingly important for long-term sustainability and competitiveness of business organizations. This study aims to analyze the interactions between apart-hotels and their stakeholders to foster an improvement of services provided, aligning the interface of strategic management from the point of view of managers and their key stakeholders. It is an exploratory study, with qualitative chacter, along with multiple case studies of the following establishments: Travel Inn, Hotels Slaviero and Etoile george v. Brazilian enterprises, which manage lodging facilities with apart-hotel concepts, combining features that enable comparative analysis of the study. For conceptual understanding, this study was based on literature about stakeholders, taking the work of Freeman (1984 and Freeman et al (2010 as main references. The research was conducted through semi-structured interviews with managers of lodging facilities and their key stakeholders and through direct observation and documentation. We found that not all groups of influence are considered in the planning of service flats. However, the organizations surveyed indicated that the market has realized the importance of the groups that exert influence and are influenced by their goals, and are therefore increasingly alert for integration of such groups in their strategic planning.

  13. Embodiment of the Spirit: A Case Study

    Directory of Open Access Journals (Sweden)

    Jan Grimell

    2017-02-01

    Full Text Available Adopting a longitudinal approach to exploring the psychology of the transition from military to civilian life, one case study is presented that adds a spiritual perspective to the transition process. This case study serves as an example representative from a group of participants who have been followed through a research project on identity reconstruction during the transition to civilian life. This individual, not unlike many others within the group, undergoes an unexpected progression of the military I-position of the self throughout the process of becoming a civilian. This study utilizes a dialogical approach to the identity work to further the understanding of longitudinal adjustments to the self. An analysis of the narrative developments and interactions among pre-existing and new I-positions of the self over time has been made based upon three annually conducted interviews spanning from 2014 to 2016. The results lead to the suggestion that if a military I-position of the self grows more salient and voiced throughout the process of transitioning into civilian life, then this vocalization may be related to the spirit of a person embodied in a specific I-position of the self. Such growth of a military I-position after leaving active service may gravitate around a deep sense of “who I am” with a profound sense of meaning attached to this position. Instead of perceiving as an unwanted development the growth of a military sense of “who I am,” one should acknowledge it as a deeper dimension of self and life. It is important to find an outlet for such a progression of the self so as to sustain balance and dialogue. Future research is encouraged to further examine these qualitative findings.

  14. Quality improvement initiatives in a case management service: case study.

    Science.gov (United States)

    Davies, Deborah J

    2015-01-01

    This article explores the importance of quality practices in underpinning the person-centred approach at a Community Options Program (COP) case management service in northern NSW. The NSW community care sector does not have a statutory excellence body to identify, promote and support improved practices and quality and safety across community services, and therefore the COP provider decided to establish a dedicated role to focus on the quality improvement of its service. The subsequent quality improvement initiatives have included mapping the clients' journey through the service, identifying areas to standardise practice, and creating service pathways. The clients' journey was used as the framework to identify where standardised practice was required, and a robust process was implemented to develop over 25 good practice guidelines and tools that addressed the variations in practice and enabled the service pathways to be developed. Prior to trialling the guidelines and tools, staff received education sessions on the anticipated changes to practice, and the practicality and applicability of the guidelines were evaluated at the end of the trials. This information was reviewed and the guidelines were amended accordingly before being rolled out. The guidelines have been in use for over 12 months and have provided the benchmark against which to audit practice, and have resulted in key performance improvements such as an increase in client review rates and a rise in the feedback response rate from clients, with a noticeable shift in the comments about the brokered support worker to acknowledging the role of their case manager. Formalising informal supports for those clients that lived alone also increased, which means these people are less reliant on services and there is a reduced risk of social isolation.

  15. Logistics opportunity costs: A mining case study

    Directory of Open Access Journals (Sweden)

    Leani van Jaarsveld

    2013-11-01

    Full Text Available This study highlighted the importance of determining the impact that an ineffective mode of transport has on a firm’s transportation model and costs. The main focus of this study was to determine the logistics opportunity costs of using road transport within a mining firm. A case study approach was followed, as the investigation aimed to analyse a complex problem experienced by one company and present it in an easily understandable format. From the results of this study, it was apparent that the logistics opportunity costs associated with the mode of transport was substantial. This highlighted the need for firms to revise their choice of transport mode on a regular basis, as it has a major impact not only on their transportation costs, but also on their inventory holding and carbon emissions. The results also have implications for South Africa’s only freight railway, Transnet Freight Rail, which should not only focus on expanding its existing capacity, but also on improving its customer service delivery whilst containing tariff increases.

  16. Subungual squamous cell carcinoma: A case study

    Energy Technology Data Exchange (ETDEWEB)

    Neill, Cory J., E-mail: coryjneill@gmail.com

    2017-07-01

    The purpose of this case study is to describe a dosimetric delivery of radiation to a superficial disease process involving the skin and bone of the distal finger. A 76-year-old male patient presented with a subungual squamous cell carcinoma (SCC) of the left distal index finger with bony involvement. The patient refused conventional surgical treatment but agreed to external beam radiation therapy (EBRT). There is a gap in the current literature describing how to successfully immobilize fingers and which EBRT modality is dosimetrically advantageous in treating them. The construction of a simple immobilization method with the patient in a reproducible position is described. The use of photons and electrons were compared ultimately showing photons to be dosimetrically advantageous. Long-term efficacy of the treatment was not evaluated because of patient noncompliance.

  17. Case studies of attacks on communication networks

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Sin Bok; Han, Eon Suk [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-06-15

    Recently, as the computer hardware and communications are developed, the data exchange through inter-networking has been highlighted and the data is being recognized as a great asset. Most of the organizations, businesses and enterprises are open to the external world-computer communication networks, attention must be focused on the securities of the information infrastructure. A government organization has been developing 'Circuits Analyzers', and 'Hacker-Tracking Program' and is struggling to track down sneakers. In this report, we analyze the contents of the cases where the communication network has been invaded, from the past up until now in Korea. This report also contains the result of a study on E-mail security, for the protection of KAERI Integrated Management Information System under which utilizes the CALS concepts and web services. (Author)

  18. Understanding Support - lessons from a case study

    Directory of Open Access Journals (Sweden)

    Chris Sauer

    1993-11-01

    Full Text Available Support from top management and others is agreed to be an important factor in information systems success and failure, but little is written about how it has its effect and how it might be managed to a project's advantage. A recently developed conceptual framework is described. It covers the nature and forms of support, the way support affects project outcomes, the bases on which support is provided, and the strategies by which support may be managed. The framework is used to analyse a case study in several stages. At the end of the analysis of each stage, the framework's utility is assessed in terms of its explanatory value and the practical advice it suggests. Areas for further research are identified.

  19. Environmental Comparative Risk Assessment: A Case Study

    International Nuclear Information System (INIS)

    Ali, M.M.

    2007-01-01

    Health and environmental impacts associated with energy production and industrial activities as well as food production and agricultural activities have had great concern in the last decades. Early activities emerged in late 80s of the last century through an Inter- Agency project (lAEA, UNDY, WHO, ... ) on the comparative risk assessment from energy systems and industrial complexes. A work-shop on Risk Assessment and Management in large industrial areas was held in Alexandria Egypt on 20-33 Det 1993, sponsored by IAEA. Several conferences, experts work groups and workshops were held there of Recent trends in determining risks are: 1. Use of probabilistic risk assessment approach to identify hazardous activities and accident scenario. 2. development of data base on failure probabilities and appropriate physical models. 3. Development of related directives and regulations and criteria Comparative risk assessment case study as a tool for comparing risk is emphasized Criteria of exposure to human and ecological risks are addressed

  20. Case studies of attacks on communication networks

    International Nuclear Information System (INIS)

    Kang, Sin Bok; Han, Eon Suk

    1996-06-01

    Recently, as the computer hardware and communications are developed, the data exchange through inter-networking has been highlighted and the data is being recognized as a great asset. Most of the organizations, businesses and enterprises are open to the external world-computer communication networks, attention must be focused on the securities of the information infrastructure. A government organization has been developing 'Circuits Analyzers', and 'Hacker-Tracking Program' and is struggling to track down sneakers. In this report, we analyze the contents of the cases where the communication network has been invaded, from the past up until now in Korea. This report also contains the result of a study on E-mail security, for the protection of KAERI Integrated Management Information System under which utilizes the CALS concepts and web services. (Author)

  1. Anxiety or neurosis: case report study

    Directory of Open Access Journals (Sweden)

    Miloš Židanik

    2005-11-01

    Full Text Available Background: With the publication of the Diagnostic and Statistical Manual, Third Edition (DSM-III in 1980, anxiety disorder was first identified as a diagnostic entity. A new theoretical approach regarding aetiology of anxiety disorders came next into the view, far from Freud’s psychoanalytical pathways. The consequences were new therapeutic guidelines, including psychopharmacotherapy and the use of behavioural and cognitive psychotherapy.Methods: The paper presents a case report study of a patient with social phobia. The use of analytical oriented psychotherapy, which helped to resolve Axis I symptoms, is described.Conclusions: In spite of new therapeutic guidelines there is still a certain population of patients with the need for psychoanalytical oriented psychotherapy. If we are to surrender the Freud’s legacy to the medical history, we will weaken psychiatry as a science and will narrow our therapeutic field.

  2. A case study of strategic planning IFB

    Directory of Open Access Journals (Sweden)

    Pedro Henrique Rodrigues de Camargo Dias

    2018-03-01

    Full Text Available The purpose of this article is to identify and characterize the initial stage of the IFB strategic planning, based on the perception of top management and planning team. The case study adopts a qualitative approach supported by bibliographic research techniques, to build a theoretical foundation, allied to the semistructure interview for later, application of the content analysis. As a result, we can identify that the institution opted to first define the strategic references, based on the construction of the mission, vision and values, and later, analysis of the organizational diagnosis, based on the Balanced Scorecard methodology. It was verified that the tool of strategic planning and its use are points that need to be better understood by the managers and technical planning team. The predominant characteristics of strategic planning are composed of a programmatic tool for projecting medium and long term goals and actions, of legal compliance, as it integrates and operationalizes the Institutional Development Plan (PDI.

  3. LM2500+ Brush Seal Case Study

    Science.gov (United States)

    Haaser, Fred G.

    2006-01-01

    The LM2500+ industrial aeroderivative gas turbine, a 25% enhanced power derivative of the LM2500 gas turbine, recently completed its development test program during the period 5/96 - 10/96. Early in the engine program a Quality Function Deployment (QFD) process was used to determine customer needs for this project.The feedback obtained from the QFD process showed without doubt that gas turbine customers now emphasize product reliability and availability at the top of their needs. One area of development on the LM2500+ was to investigate the use of a brush seal as a means to reduce undesirable turbine cooling leakages within the turbine mid frame in order to enhance part life. This presentation presents a case study on the factors that went into evaluating a brush seal during engine test, test results, and the ultimate decision not to implement the brush seal for cost and other reasons.

  4. A case study in pathway knowledgebase verification

    Directory of Open Access Journals (Sweden)

    Shah Nigam H

    2006-04-01

    Full Text Available Abstract Background Biological databases and pathway knowledgebases are proliferating rapidly. We are developing software tools for computer-aided hypothesis design and evaluation, and we would like our tools to take advantage of the information stored in these repositories. But before we can reliably use a pathway knowledgebase as a data source, we need to proofread it to ensure that it can fully support computer-aided information integration and inference. Results We design a series of logical tests to detect potential problems we might encounter using a particular knowledgebase, the Reactome database, with a particular computer-aided hypothesis evaluation tool, HyBrow. We develop an explicit formal language from the language implicit in the Reactome data format and specify a logic to evaluate models expressed using this language. We use the formalism of finite model theory in this work. We then use this logic to formulate tests for desirable properties (such as completeness, consistency, and well-formedness for pathways stored in Reactome. We apply these tests to the publicly available Reactome releases (releases 10 through 14 and compare the results, which highlight Reactome's steady improvement in terms of decreasing inconsistencies. We also investigate and discuss Reactome's potential for supporting computer-aided inference tools. Conclusion The case study described in this work demonstrates that it is possible to use our model theory based approach to identify problems one might encounter using a knowledgebase to support hypothesis evaluation tools. The methodology we use is general and is in no way restricted to the specific knowledgebase employed in this case study. Future application of this methodology will enable us to compare pathway resources with respect to the generic properties such resources will need to possess if they are to support automated reasoning.

  5. A case study in pathway knowledgebase verification.

    Science.gov (United States)

    Racunas, Stephen A; Shah, Nigam H; Fedoroff, Nina V

    2006-04-08

    Biological databases and pathway knowledge-bases are proliferating rapidly. We are developing software tools for computer-aided hypothesis design and evaluation, and we would like our tools to take advantage of the information stored in these repositories. But before we can reliably use a pathway knowledge-base as a data source, we need to proofread it to ensure that it can fully support computer-aided information integration and inference. We design a series of logical tests to detect potential problems we might encounter using a particular knowledge-base, the Reactome database, with a particular computer-aided hypothesis evaluation tool, HyBrow. We develop an explicit formal language from the language implicit in the Reactome data format and specify a logic to evaluate models expressed using this language. We use the formalism of finite model theory in this work. We then use this logic to formulate tests for desirable properties (such as completeness, consistency, and well-formedness) for pathways stored in Reactome. We apply these tests to the publicly available Reactome releases (releases 10 through 14) and compare the results, which highlight Reactome's steady improvement in terms of decreasing inconsistencies. We also investigate and discuss Reactome's potential for supporting computer-aided inference tools. The case study described in this work demonstrates that it is possible to use our model theory based approach to identify problems one might encounter using a knowledge-base to support hypothesis evaluation tools. The methodology we use is general and is in no way restricted to the specific knowledge-base employed in this case study. Future application of this methodology will enable us to compare pathway resources with respect to the generic properties such resources will need to possess if they are to support automated reasoning.

  6. Laryngeal sarcoidosis: a case-control study.

    Science.gov (United States)

    Duchemann, Boris; Lavolé, Armelle; Naccache, Jean-Marc; Nunes, Hilario; Benzakin, Sylvain; Lefevre, Marine; Kambouchner, Marianne; Périé, Sophie; Valeyre, Dominique; Cadranel, Jacques

    2014-10-20

    We undertook a study on a series of laryngeal sarcoidosis (LS), a very rare and often threatening localization to better specify laryngeal manifestations, sarcoidosis clinical expression and long-term follow-up. This was a retrospective case-control study. All LS patients from two French centers were included and compared to sarcoidosis patients without laryngeal localization with two controls for one patient. Twelve consecutive LS patients were recruited between 1993 and 2011. LS revealed sarcoidosis in eight cases (67%). The most common symptoms were hoarseness (77%), inspiratory dyspnea (38%) and dysphagia (38%). Epidemiological characterisics were not different. Extrapulmonary localizations were significantly more common in LS patients than in controls (92% vs. 54%, p=0.02), particularly lupus pernio (25% vs. 0%, p=0.03) and nasosinusal involvement (83% vs. 4%, p<0.01) while thoracic involvement was less frequent (58% vs 100%, p < 0.01). Treatment rates were higher in the LS group (92% vs. 58%, p=0.04), and treatment duration was longer (median: 81 vs. 13 months, p=0.04), with frequent long-term treatment (67%, N=8/12). Two patients underwent surgery. One patient needed temporary tracheostomy during the course of the disease; Remission rates were lower in LS patients (9% vs. 58% at 2 years p<0.01). Eventually, there was no death nor definitive tracheotomy. LS is a rare condition that is often associated to other loco-regional localizations. LS are often difficult to manage. Survival is good but may require a medico-surgical approach.

  7. Integrative health coaching: an organizational case study.

    Science.gov (United States)

    Wolever, Ruth Q; Caldwell, Karen L; Wakefield, Jessica P; Little, Kerry J; Gresko, Jeanne; Shaw, Andrea; Duda, Linda V; Kosey, Julie M; Gaudet, Tracy

    2011-01-01

    The aim of this study was to describe integrative health (IH) coaching as developed in three different interventions offered through a major medical center, as a step toward further defining the field of health coaching. An organizational case study was conducted with document analysis and interviews. Interviewees were the first six IH coaches at Duke Integrative Medicine who provided 360 clients with individual and/or group coaching (two to 28 sessions) in a randomized clinical study and two work-site wellness programs. Qualitative analysis using the constant comparative method was conducted. Integrative health coaching is characterized by a process of self-discovery that informs goal setting and builds internal motivation by linking clients' goals to their values and sense of purpose. Time, commitment, and motivation are necessary in the IH coaching process. The underpinnings of IH coaching are distinct from the medical model, and the process is distinct from health education, executive coaching, and psychotherapy. Integrative health coaching fits well with the assumptions of integrative medicine and has a role in supporting behavior change. Copyright © 2011. Published by Elsevier Inc.

  8. [Study of 103 cases of odontogenic cysts].

    Science.gov (United States)

    Moctezuma-Bravo, Gustavo Sergio; Magallanes-González, Eduardo

    2009-01-01

    To describe characteristics of odontogenic cysts in a Mexican population. A retrospective study of 103 odontogenic cysts in 86 patients was done. The data were obtained from files of the Pathology Department of a General Hospital. We observed a frequency of the 8.13 % of odontogenic cysts (103) in 1266 pathological studies. The dentigerous cyst 56 % and odontogenic keratocyst 33 % were the most common odontogenic cysts. Sixty one percent of the cysts appeared in the second and third decades of life. In 71 cysts, 42 % appeared in the posterior region jaw, 29 % in the anterior region of the maxilla and 21 % in the posterior region of the maxilla. A 6.7 % developed a recurrence after treatment and a case of keratocyst of posterior region of the maxilla was associated with epidermoid carcinoma. The study included three women with the syndrome of carcinoma of the basal cell nevus, who presented multiple keratocysts. The dentigerous cysts and odontogenic keratocysts were the most frequent odontogenic cysts. They appeared mainly in the second and third decades of life.

  9. Landslide Economics: Concepts and Case Studies

    Science.gov (United States)

    Klose, Martin; Damm, Bodo

    2015-04-01

    Landslide economics is vital for fundamental understanding of landslide risk as dealing with two important topics: (i) impact assessment, either as damage statistics or cost modeling, and (ii) vulnerability assessment, i.e., the study of exposure, sensitivity, and resilience to landslide damage, ideally from both sociotechnical and financial perspective (e.g., Crovelli and Coe, 2009; Wills et al., 2014). Many aspects addressed in landslide economics have direct influence on landslide risk, including: (i) human activity is often a major causative factor of landslides, not only by predisposing or triggering them, but also as a result of inadequate (low-cost) landslide mitigation; (ii) the level of tolerable or acceptable risk, a measure driving a large part of landslide costs in industrialized countries, is highly variable, differing between individuals, public or private organizations, and societies, with its nature being to change over time; and (iii) decision makers are faced with finding the right balance in landslide mitigation, thus need to weight diverse geological and socioeconomic factors that control its effectiveness in both technical and financial terms (e.g., Klose et al., 2014a). A large part of the complexity in assessing landslide risk as measured by economic costs is due to unique problems in understanding of (i) what types of landslide damage affect human activity and infrastructure in which way, (ii) how society contributes and responds to various kinds of damage, and (iii) how landslide damage is valued in monetary terms. Landslide economics shows the potential to take account of these sociocultural factors to the benefit of risk analysis (e.g., Klose et al., 2014b). The present contribution introduces local and regional case studies in which different economic issues of landslide risk are highlighted using the example of public infrastructures in NW Germany. A special focus is on the following topics: (i) risk culture and created risk, (ii

  10. Industrial monument and symbol of a new beginning. Coal scrubber on mine Zollverein; Industriedenkmal und Symbol eines Neubeginns. Die Kohlenwaesche auf Zeche Zollverein

    Energy Technology Data Exchange (ETDEWEB)

    Seht, Bernd von; Schneider, Helmut; Ferrarini, Dario [Ingenieurbuero Wetzel und von Seht, Hamburg (Germany)

    2008-09-15

    The former coal mine ''Zollverein'' has been accepted in the UNESCO World Heritage List, which proves its status as an outstanding monument of industrial culture in the Ruhr region. Currently, the buildings are being converted into a culture and design forum of international renown. The coal scrubber building of Schacht XII is presented as an example to show how the conflicting goals of conservation and transformation can be integrated in consideration of current standards for supporting structures. (orig.)

  11. Ecological effects of scrubber water discharge on coastal plankton: Potential synergistic effects of contaminants reduce survival and feeding of the copepod Acartia tonsa

    DEFF Research Database (Denmark)

    Koski, Marja; Stedmon, Colin; Trapp, Stefan

    2017-01-01

    and hydrocarbons. We investigated 1) the threshold concentrations of scrubber discharge water for survival, feeding and reproduction of the copepod Acartia tonsa, 2) whether the effects depend on the exposure route and 3) whether exposure to discharge water can be detected in field-collected organisms. A direct...... constituents could have synergistic effects on plankton productivity and bioaccumulation of metals, although the effects will depend on their dilution in the marine environment....

  12. Data Rescue Case Studies from the Cryosphere

    Science.gov (United States)

    Fetterer, F. M.

    2017-12-01

    A simple definition of the cryosphere is "where the world is frozen", or where water takes the form of snow and ice. The cryosphere is shrinking as the Earth warms. Data, particularly old data, document this in often eye-opening fashion. A photograph of Alaska's Muir Glacier taken in 1902 next to one taken in 2005 has impact that a line graph of air temperature anomalies from a weather station can't match, even though temperature data are fundamental to climate research and to understanding the glacier retreat captured in the photographs. Whaling logbooks from the late 1800s, maps of sea ice shared internationally in the 1930s, and satellite images of the polar oceans from the 1960s are not as immediately thought-provoking as are glacier photographs, but when preserved and documented they provide a record of sea ice coverage that is more than 100 years long. We developed a data product from these and other sources that is used in meteorological reanalysis and to answer questions about ice in the Arctic prior to 1978, when commonly used satellite-data-derived sea ice records begin. Preserving glacier photographs and making them available online, and publishing a gridded sea ice data product that builds on the preservation work of others are examples of data rescue projects that benefit scientific research and mobilize knowledge. These and other case studies suggest that even absent secure funding and an organizational setting that supports data rescue, important data make the transition from someone's office to archived and online with metadata because scientists are impassioned about the data they collect and want others to be able to use these data. In these cases from the cryosphere, student interns, collaborations with librarians, and cooperation with colleagues in other data centers have made it possible to preserve data at low cost.

  13. Case studies on age-management in organisations: report on organisational case studies

    NARCIS (Netherlands)

    Punte, E.; Conen, W.S.; Schippers, J.; Henkens, C.J.I.M.

    2011-01-01

    The acquisition of case studies was thwarted by the economic crisis and the feeling of being ‘over-researched’ by potential organisations. Although organisations in some sectors (e.g. chemical manufacturing) reported the worst part of the economic crisis was behind, many organisations indicated

  14. Case Study: The Mystery of the Seven Deaths--A Case Study in Cellular Respiration

    Science.gov (United States)

    Gazdik, Michaela

    2014-01-01

    Cellular respiration, the central component of cellular metabolism, can be a difficult concept for many students to fully understand. In this interrupted, problem-based case study, students explore the purpose of cellular respiration as they play the role of medical examiner, analyzing autopsy evidence to determine the mysterious cause of death…

  15. BOOK REVIEW: Case Studies in Knowledge Management

    Directory of Open Access Journals (Sweden)

    Reviewed by Dr. Adnan BOYACI

    2005-10-01

    Full Text Available 161Case Studies in Knowledge ManagementEdited by Murray JennexHersley: PA: Idea Group, 2005, pp. 372, ISBN 1-59140-352-9Reviewed by Dr. Adnan BOYACIAnadolu UniversityEskişehir-TurkeyKnowledge management (KM as a structured system and the way to the effectiveness isrelatively new field for the contemporary organizations functioning in different andcompetitive domain of public and private sectors in terms of getting optimal effectivenessunderlined by the concepts such as quality, productivity…etc. Because of the growingimportance and the popularity of the KM either as a research topic or specialized coursesubject, a crucial need for understanding, conceptualization and implementation of KM asa system has emerged since the mid 1990’s. In this sense, the book contributes criticallyto fill the gap between theory and implementation as a teaching material.This edited book is published by Idea Group Publishing. The book has twenty chaptersdivided into seven sections. In addition to a section of authors’ biography contributing thebook and an index, there is a preface that the basic terms and key concepts underliningthe cases discussed following chapters, which is explained in a schematized way.Besides the editor, total of 47 authors have contributed to the book. These authors arefrom different countries, academic backgrounds, and institutions. Although approximatelyone third of the authors are from USA, the rest of the authors are from Canada, England,Austria, Germany, Australia, New Zealand, Egypt, Bahrain and China. The authorsrepresent a variety of universities, private companies, and military institutions. Most ofthem have strong professional backgrounds, which help them address the issues bothfrom theoretical and practical perspectives. Contributions of authors having differentbackgrounds and institutions enable the book to have very comprehensive spectrum andthis makes the book attractive practically for those working different sectors

  16. Case studies of selected Project "Flash" events

    Directory of Open Access Journals (Sweden)

    K. A. Nicolaides

    2009-03-01

    Full Text Available Flooding is a consequence of the prevailing meteorological situation, the intensity and duration of precipitation, geomorphology, human activities over a geographical region and other factors. Floods result in damage and destruction of infrastructure and private property and, in some cases, in fatalities. Flash floods are sudden and quite localized in extend, characterized by excessive amounts of rainfall within a short period of time and are distinguished from other floods by their degree of severity. The broader knowledge concerning flash floods is useful for the better understanding of the underlying thermodynamic and dynamic mechanisms, as well as the associated physical processes. The wider understanding of flashfloods can form part of an integrated system for short and very short forecasting of these events. In the present study, the synoptic, dynamic and thermodynamic conditions during the development of a baroclinic depression which affected the area of Cyprus on 6 November 2005 are studied. The depression was associated with extreme weather phenomena, such as thunderstorms, a water spout and high precipitation accumulations. The results indicate the importance of the dynamic parameters in the system's development and the thermodynamic analysis has shown the convective potential of the atmosphere.

  17. Odontoma: a retrospective study of 73 cases

    International Nuclear Information System (INIS)

    An, Seo Young; An, Chang Hyeon; Choi, Karp Shik

    2012-01-01

    The purpose of the present study was to retrospectively evaluate the clinical findings and treatment results for impacted permanent teeth associated with odontomas. We retrospectively investigated 73 odontomas in 72 patients who visited Kyungpook National University Dental Hospital from April 2004 through November 2011. The study was performed using medical records, panoramic radiographs, and pathological reports. Data gathered included age, gender, location, chief complaints, effects on dentition, and treatment of odontoma and the impacted tooth associated with odontoma. Most compound odontomas (46.7%) were found in the second decade and complex odontomas were not related to age. Odontomas showed no gender predilection. Fifty-five cases (75.3%) of odontomas were detected on routine dental radiographs. Sixty percent of compound odontomas occurred in the canine area and 57.1% of complex odontomas in the molar areas. Impaction of permanent teeth (61.6%) was the most common complication on the adjacent teeth. Most odontomas (84.9%) were removed surgically and impacted permanent teeth were managed by surgical removal (53.2%), orthodontic treatment (25.5%), or surgical repositioning (6.4%). There was a statistically significant relation between age and preservation of the impacted permanent teeth associated with odontomas (p<0.01). Early detection and treatment of odontomas increase the possibility of preservation of the impacted tooth. Therefore, it would be suggested that periodic panoramic examination during the first and second decade of life might be beneficial for the early detection and better prognosis of odontomas.

  18. (Case Study: Wastewater Pump Station of Khoramabad

    Directory of Open Access Journals (Sweden)

    Masoud Taheriyoun

    2014-10-01

    Full Text Available Evaluation of a Biofilter System for Removal of Hydrogen Sulfide Gas (Case Study: Wastewater Pump Station of Khorramabad Abstract The biofilter system is one of the methods commonly used for the removal of hydrogen sulfide as the main source of odors emitted from wastewater facilities. The system is based on using the contaminant material as bedding to feed microorganisms. To achieve the desirable removal efficiency, it is, therefore, essential to create the proper conditions for the bacteria to grow on the bedding. In this study, a pilot-scale biofilter made of compost and woodchip (with a compost/woodchip ratio of 5:1 was used as the bedding material at Khorrmabad wastewater pumping station to investigate the performance of the system under real conditions. The experiment was carried out over 75 days during which time the input and output H2S concentrations were measured on a regular basis. Moisture was adjusted between 40% and 60% throughout the experiment to provide optimal conditions for bacterial growth. The results showed that the concentration of H2S emitted from the pumping station during 24 hours varied greatly between 0 and 48 PPM. The maximum adsorption capacity of the biological bedding was recorded at 2.874 g/m3.hr and the mean efficiency of H2S removal including the startup time was 89%. The mean performance efficiency during the biological activity after the startup was recorded at 98%.

  19. Odontoma: a retrospective study of 73 cases

    Energy Technology Data Exchange (ETDEWEB)

    An, Seo Young; An, Chang Hyeon; Choi, Karp Shik [School of Dentistry, Kyungpook National University, Daegu (Korea, Republic of)

    2012-06-15

    The purpose of the present study was to retrospectively evaluate the clinical findings and treatment results for impacted permanent teeth associated with odontomas. We retrospectively investigated 73 odontomas in 72 patients who visited Kyungpook National University Dental Hospital from April 2004 through November 2011. The study was performed using medical records, panoramic radiographs, and pathological reports. Data gathered included age, gender, location, chief complaints, effects on dentition, and treatment of odontoma and the impacted tooth associated with odontoma. Most compound odontomas (46.7%) were found in the second decade and complex odontomas were not related to age. Odontomas showed no gender predilection. Fifty-five cases (75.3%) of odontomas were detected on routine dental radiographs. Sixty percent of compound odontomas occurred in the canine area and 57.1% of complex odontomas in the molar areas. Impaction of permanent teeth (61.6%) was the most common complication on the adjacent teeth. Most odontomas (84.9%) were removed surgically and impacted permanent teeth were managed by surgical removal (53.2%), orthodontic treatment (25.5%), or surgical repositioning (6.4%). There was a statistically significant relation between age and preservation of the impacted permanent teeth associated with odontomas (p<0.01). Early detection and treatment of odontomas increase the possibility of preservation of the impacted tooth. Therefore, it would be suggested that periodic panoramic examination during the first and second decade of life might be beneficial for the early detection and better prognosis of odontomas.

  20. Anorexia in the Adolescence - case study

    Directory of Open Access Journals (Sweden)

    Almeida de Paiva, Maria O

    2010-07-01

    Full Text Available Eating disorders lead to special biological and psychological states. The result of the total lack of food is treated in a distinct way by anorexia. Nutritionists have thus had difficulty in coming to an agreement on the best therapy to prevent such disorders. First it is essential to understand which treatment aims are and then to attempt to know how the several treatment models used nowadays can reach those aims. Someone who suffers from eating disorders, together with an inner deformation, suffers from too much sensitiveness. In order to solve these problems, one needs a change in the relationship with oneself, with the others and with the world. This study presents a teenager’s case study – Anorexia. Is, in fact, a problem that society faces and can’t ignore. Many youngsters have already died and others are following their steps. But there are also those ones that succeeded in overcoming the problem and now are reporting their stories.

  1. Performance evaluation of poly-urethane foam packed-bed chemical scrubber for the oxidative absorption of NH3 and H2S gases.

    Science.gov (United States)

    Nisola, Grace M; Valdehuesa, Kris Niño G; Anonas, Alex V; Ramos, Kristine Rose M; Lee, Won-Keun; Chung, Wook-Jin

    2018-01-02

    The feasibility of open-pore polyurethane (PU) foam as packing material for wet chemical scrubber was tested for NH 3 and H 2 S removals. The foam is inexpensive, light-weight, highly porous (low pressure drop) and provides large surface area per unit volume, which are desirable properties for enhanced gas/liquid mass transfer. Conventional HCl/HOCl (for NH 3 ) and NaOH/NaOCl (for H 2 S) scrubbing solutions were used to absorb and oxidize the gases. Assessment of the wet chemical scrubbers reveals that pH and ORP levels are important to maintain the gas removal efficiencies >95%. A higher re-circulation rate of scrubbing solutions also proved to enhance the performance of the NH 3 and H 2 S columns. Accumulation of salts was confirmed by the gradual increase in total dissolved solids and conductivity values of scrubbing solutions. The critical elimination capacities at >95% gas removals were found to be 5.24 g NH 3 -N/m 3 -h and 17.2 g H 2 S-S/m 3 -h at an empty bed gas residence time of 23.6 s. Negligible pressure drops (scrubbers for NH 3 and H 2 S removals from high-volume dilute emissions.

  2. Assembling a Case Study Tool Kit: 10 Tools for Teaching with Cases

    Science.gov (United States)

    Prud'homme-Généreux, Annie

    2017-01-01

    This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. The author shares the strategies and tools that teachers can use to manage a case study classroom effectively.

  3. Case Study: Camptocormia, a Rare Conversion Disorder.

    Science.gov (United States)

    Rajmohan, Velayudhan; Thomas, Biju; Sreekumar, Kumaran

    2004-01-01

    Camptocormia is a condition characterized by severe frontal flexion of the spinal cord and knees, with passive drooping of both arms. It occurs as a form of conversion disorder. Some cases are associated with behavioral problems. A case of camptocormia of 2-year duration in a south Indian adolescent girl with oppositional defiant disorder and…

  4. CROSSFIT – mental training. Case study

    Directory of Open Access Journals (Sweden)

    Beata Rolak

    2017-08-01

    Full Text Available Introduction: CrossFit is a challenging sport. It enforces full engagement of the athlete in every move during every training session. CrossFit teaches perseverance, discipline and respect. Sports psychology allows for in-depth analysis of trainings or competitions. The athlete can better prepare himself for what he may face, both on the mistakes made and on success. Regular mental training supports the athlete's ability to be successful in sports. The aim of the study: The purpose of this paper was to demonstrate the relationship between mental training - here mainly focused on concentration, self-confidence and imagery,  CrossFit and sports performance. Material and the method: This paper is a case study. The subject of the study was a male - 30 years old, training crossfit, with the 3-year training experience. Meeting  period with the subject male was conducted for 2 months. Before and after the meeting period there were used below mentioned methods: Sports Confidence Inventory (TSCI-PL; The Sport Anxiety Scale (SAS; The Imagination in Sport Questionnaire; The Sport  Orientation Questionnaire (SOQ and the profile of skills.   Results: There was a noticeable increase of the results in the questionnaires: Sports Confidence Inventory (TSCI-PL; The Imagination in Sport Questionnaire; The Sport  Orientation Questionnaire (SOQ questionnaire for the self-confidence (TSCI-PL.  The Sport Anxiety Scale (SAS there was an increase of the results regarding the somatic anxiety and worrying also there was a decrease in the scale of distraction. Conclusion: The meeting period turned out to be effective, however the mental training requires regularity and longevity in order to maintain consistency and repeatability of behavior.

  5. Teaching microbiological food safety through case studies

    Directory of Open Access Journals (Sweden)

    Florence Dubois-Brissonnet

    2015-10-01

    Full Text Available Higher education students usually ask for more training based on case studies. This was addressed by designing a specific food safety module (24 hours in which students were shown how to predict microbiological risks in food products i.e. they were asked to determine product shelf-life according to product formulation, preservation methods and consumption habits using predictive microbiology tools. Working groups of four students first identified the main microbiological hazards associated with a specific product. To perform this task, they were given several documents including guides for good hygiene practices, reviews on microbiological hazards in the food sector, flow sheets, etc…  After three-hours of work, the working groups prepared and gave an oral presentation in front of their classmates and professors. This raised comments and discussion that allowed students to adjust their conclusions before beginning the next step of their work. This second step consisted in the evaluation of the safety risk associated with the two major microbiological hazards of the product studied, using predictive microbiology. Students then attended a general lecture on the different tools of predictive microbiology and tutorials (6 hours that made them familiar with the modelling of bacterial growth or inactivation. They applied these tools (9 hours to predict the shelf-life of the studied product according to various scenarios of preservation (refrigeration, water activity, concentration of salt or acid, modified atmosphere, etc… and/or consumption procedures (cooking. The module was concluded by oral presentations of each working group and included student evaluation (3 hours.

  6. Jazz improvisers’ shared understanding: A case study

    Directory of Open Access Journals (Sweden)

    Michael F. Schober

    2014-08-01

    Full Text Available To what extent and in what arenas do collaborating musicians need to understand what they are doing in the same way? Two experienced jazz musicians who had never previously played together played three improvisations on a jazz standard (It Could Happen to You on either side of a visual barrier. They were then immediately interviewed separately about the performances, their musical intentions, and their judgments of their partner’s musical intentions, both from memory and prompted with the audiorecordings of the performances. Statements from both (audiorecorded interviews as well as statements from an expert listener were extracted and anonymized. Two months later, the performers listened to the recordings and rated the extent to which they endorsed each statement. Performers endorsed statements they themselves had generated more often than statements by their performing partner and the expert listener; their overall level of agreement with each other was greater than chance but moderate to low, with disagreements about the quality of one of the performances and about who was responsible for it. The quality of the performances combined with the disparities in agreement suggest that, at least in this case study, fully shared understanding of what happened is not essential for successful improvisation. The fact that the performers endorsed an expert listener’s statements more than their partner’s argues against a simple notion that performers’ interpretations are always privileged relative to an outsider’s.

  7. Comparative economic analysis: Anaerobic digester case study

    International Nuclear Information System (INIS)

    Lusk, P.D.

    1991-01-01

    An economic guide is developed to assess the value of anaerobic digesters used on dairy farms. Two varieties of anaerobic digesters, a conventional mixed-tank mesophilic and an innovative earthen psychrophilic, are comparatively evaluated using a cost-effectiveness index. The two case study examples are also evaluated using three other investment merit statistics: simple payback period, net present value, and internal rate of return. Life-cycle savings are estimated for both varieties, with sensitivities considered for investment risk. The conclusion is that an earthen psychrophilic digester can have a significant economic advantage over a mixed-tank mesophilic digester because of lower capital cost and reduced operation and maintenance expenses. Because of this economic advantage, additional projects are being conducted in North Carolina to increase the rate of biogas utilization. The initial step includes using biogas for milk cooling at the dairy farm where the existing psychrophilic digester is located. Further, a new project is being initiated for electricity production with thermal reclaim at a swine operation

  8. CFD analysis for road vehicles - case study

    Directory of Open Access Journals (Sweden)

    Eugen Mihai NEGRUS

    2011-09-01

    Full Text Available This is a case study on the influence of the lower part of road vehicles on the global drag characteristics. Reducing overall drag by redesigning the lower part of the road vehicles has a potential of almost 20% in the overall drag breakdown, mainly due to the viscous effects and the fluidic interaction of the flow under the car with the typical bluff body flow pattern behind the vehicle. A special parameterization is proposed for the global shape of the sedan car, with respect to the lower part of the body, taking into account most of the specificities of the system. For such a complex interaction, CFD analysis is probably the only efficient tool in order to assess specific design parameterization of a generic car shape. Building on the credibility of such instruments is one of the major goals of this paper. Also, with respect to a target sedan car configuration, examples of successful design strategies are presented. Based on the CFD results, possible strategies to be used in order to reduce viscous drag and global drag characteristics are proposed.

  9. Deep Energy Retrofits - Eleven California Case Studies

    Energy Technology Data Exchange (ETDEWEB)

    Less, Brennan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fisher, Jeremy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Walker, Iain [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-10-01

    This research documents and demonstrates viable approaches using existing materials, tools and technologies in owner-conducted deep energy retrofits (DERs). These retrofits are meant to reduce energy use by 70% or more, and include extensive upgrades to the building enclosure, heating, cooling and hot water equipment, and often incorporate appliance and lighting upgrades as well as the addition of renewable energy. In this report, 11 Northern California (IECC climate zone 3) DER case studies are described and analyzed in detail, including building diagnostic tests and end-use energy monitoring results. All projects recognized the need to improve the home and its systems approximately to current building code-levels, and then pursued deeper energy reductions through either enhanced technology/ building enclosure measures, or through occupant conservation efforts, both of which achieved impressive energy performance and reductions. The beyond-code incremental DER costs averaged $25,910 for the six homes where cost data were available. DERs were affordable when these incremental costs were financed as part of a remodel, averaging a $30 per month increase in the net-cost of home ownership.

  10. Willowglen Systems Inc. : 8 case studies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    The various supervisory control and data acquisition (SCADA) systems designed by Willowglen Systems Inc. were described. The company provides custom SCADA technology products, automation systems, and technical services for various applications. Their remote terminal units (RTUs) were designed to have a very low power consumption rate, and can be operated from any power source. The company has also designed integrated metering and communications solutions for remote locations. The following 8 case studies of Willowglen System solutions were highlighted: (1) a SCADA system designed for the Northwest Territories Power Corporation, (2) a system of RTUs installed at the Shell Canada Ltd. Caroline Gas Complex, (3) a SCADA system designed to monitor a natural gas pipeline, (4) a SCADA system designed to monitor a transmission pipeline and distribution system in Singapore, (5) RTUs designed to monitor gas dehydration units in Bahrain, (6) a SCADA system designed for a refined petroleum products pipeline, (7) a SCADA system installed at an electric power utility in New Brunswick, and (8) a tank gauging system designed for a large oil refinery in Alberta. 7 figs.

  11. Environmental injustice: case studies from the South

    International Nuclear Information System (INIS)

    Cifuentes, Enrique; Frumkin, Howard

    2007-01-01

    We selected three case studies to illustrate environmental injustice issues in the South. These examples relate to migrant agricultural workers, the maquiladora industry and artisanal mining, while reviewing some of the major mechanisms involved, e.g. multinational corporations, the development of free trade zones, multilateral free trade agreements and the export of hazards. A series of strategies are discussed in order to address environmental injustice and health disparities that exist on a global scale. Some of the recommendations involve policy initiatives; others, such as research and mentorship, fall within the traditional domain of public health practice. In this paper, special attention is given to concerned environmental and occupational health professionals using evidence-based data for advocacy. For lasting changes to be made, however, stronger institutions and legislation are required. Those who have the 'right to know' about environmental injustice issues include communities of concern, workers' representatives and lawyers. Government officials and company officials may eventually work on the basis of conflict resolution, compensation and remediation, to quote some examples. Systematic approaches to protect both the environment and public health must be updated

  12. Hyperamonemia in children. Study of 72 cases

    Directory of Open Access Journals (Sweden)

    Jiménez Pérez Mario

    2014-07-01

    Full Text Available Hyperammonemia (HA is a metabolic emergency, and when not diagnosed and treated in a timely manner leads to severe neuro- logical damage and/ or death. HA may have multiple origins, but the EIM are one of the causes that should always be suspected. The objective of this work is to make a clinical description of the causes of HA in a sample of patients from the National Institute of Pediatrics (INP, to know the proportion of patients with HA in which could confirm the presence of an inborn error of metabolism (IEM. We found 72 patients with HA in the past 10 years, of whom 11 were patients already known to have an IEM and 61 with unknown cause; Of the latter, 46% of patients underwent metabolic studies (amino acids quantification, organic acids analysis and orotic acid quantification and in 14 cases (30% an IEM was diagnosed. The clinical symptoms most frequently observed were neurological (seizures, drowsiness, lethargy, irritability, developmental delay, and hypotonia stupor, etc., followed by digestive disturbances such as vomiting and refusal to eat. Urea cycle disorders, aminoacidopathies and organic acidemias were diagnosed, so the management and treatment of these should be known by the pediatricians, especially those dedicated to emergencies.

  13. [Turner syndrome: Study of 42 cases].

    Science.gov (United States)

    Bahíllo-Curieses, M Pilar; Prieto-Matos, Pablo; Quiroga González, Rocío; Regueras Santos, Laura; Blanco Barrio, Amaya; Rupérez Peña, Sara

    2016-10-21

    Turner syndrome (TS) is characterized by short stature, gonadal dysgenesis, and total or partial loss of X chromosome. A historical cohorts study of patients with TS≤18 years old followed up in public hospitals in Castilla y Leon was undertaken. Forty-two female patients were included (prenatal diagnosis 11.9%, neonatal diagnosis 14.3%) with current median age 11.9±4.2 years. Short stature was the reason for consultation in 87.1%. Total monosomy of X chromosome was present in 40.5%. The most frequently associated comorbidity was opthalmological (50%), with heart defects in 23.8%. Ninety-three percent were treated with growth hormone (GH), mean age at the beginning of treatment was 7.43±3.4 years and mean height standard deviation was -2.84±1.08. Final height was reached in 10 patients only (mean final height 151.47±6.09cm). Chronological age of puberty induction was 13.2±0.94 years (bone age 12.47±1.17 years). Short stature was an important clinical sign for the diagnosis of TS, accompanied in some cases by other findings, with good response to GH treatment. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

  14. Jazz improvisers' shared understanding: a case study.

    Science.gov (United States)

    Schober, Michael F; Spiro, Neta

    2014-01-01

    To what extent and in what arenas do collaborating musicians need to understand what they are doing in the same way? Two experienced jazz musicians who had never previously played together played three improvisations on a jazz standard ("It Could Happen to You") on either side of a visual barrier. They were then immediately interviewed separately about the performances, their musical intentions, and their judgments of their partner's musical intentions, both from memory and prompted with the audiorecordings of the performances. Statements from both (audiorecorded) interviews as well as statements from an expert listener were extracted and anonymized. Two months later, the performers listened to the recordings and rated the extent to which they endorsed each statement. Performers endorsed statements they themselves had generated more often than statements by their performing partner and the expert listener; their overall level of agreement with each other was greater than chance but moderate to low, with disagreements about the quality of one of the performances and about who was responsible for it. The quality of the performances combined with the disparities in agreement suggest that, at least in this case study, fully shared understanding of what happened is not essential for successful improvisation. The fact that the performers endorsed an expert listener's statements more than their partner's argues against a simple notion that performers' interpretations are always privileged relative to an outsider's.

  15. Case study : a transformer repair facility

    Energy Technology Data Exchange (ETDEWEB)

    Jerade, L. [Jacques Whitford Environment Ltd., Vancouver, BC (Canada)

    2006-07-01

    Polychlorinated biphenyls (PCBs) are synthetic chemical compounds consisting of chlorine, carbon and hydrogen. They are very stable, fire resistant, do not conduct electricity and have low volatility at normal temperatures. They were mainly used as a cooling and insulating fluid for industrial transformers and capacitors. Some of the same properties that made PCBs so widely used, also make them environmentally hazardous, especially their extreme resistance to chemical and biological breakdown by natural processes in the environment. Typical chemicals associated with the presence of PCB oils are chlorobenzene, lead, xylene, and petroleum hydrocarbons. A case study of a transformer repair facility was discussed along with its soil and groundwater remediation. This presentation discussed the delineation program for the site which operated as a repair facility of PCB-containing transformers from 1968 until 1998. The property was bought by Siemens Canada Ltd. in 1998 and was sold in 2004. As part of the purchasing agreement, a Certificate of Compliance from the British Columbia Ministry of Environment was required. Remediation work was therefore needed. The presentation also covered: zones of contamination and contaminants of concern, soil impacts, groundwater impacts, and an evaluation of remediation options. In-situ treatment of soil with hydrogen peroxide and the selected remedial option were discussed. A soil economic analysis was also conducted. Last, challenges, solutions, and conclusions were presented. tabs., figs.

  16. Hybrid Risk Management Methodology: A Case Study

    Directory of Open Access Journals (Sweden)

    Jacky Siu-Lun Ting

    2009-10-01

    Full Text Available Risk management is a decision-making process involving considerations of political, social, economic and engineering factors with relevant risk assessments relating to a potential hazard. In the last decade, a number of risk management tools are introduced and employed to manage and minimize the uncertainty and threats realization to the organizations. However, the focus of these methodologies are different; in which companies need to adopt various risk management principles to visualize a full picture of the organizational risk level. Regarding to this, this paper presents a new approach of risk management that integrates Hierarchical Holographic Modeling (HHM, Enterprise Risk Management (ERM and Business Recovery Planning (BCP for identifying and assessing risks as well as managing the consequences of realized residual risks. To illustrate the procedures of the proposed methodology, a logistic company ABC Limited is chosen to serve as a case study Through applying HHM and ERM to investigate and assess the risk, ABC Limited can be better evaluated the potential risks and then took the responsive actions (e.g. BCP to handle the risks and crisis in near future.

  17. Environmental injustice: case studies from the South

    Science.gov (United States)

    Cifuentes, Enrique; Frumkin, Howard

    2007-10-01

    We selected three case studies to illustrate environmental injustice issues in the South. These examples relate to migrant agricultural workers, the maquiladora industry and artisanal mining, while reviewing some of the major mechanisms involved, e.g. multinational corporations, the development of free trade zones, multilateral free trade agreements and the export of hazards. A series of strategies are discussed in order to address environmental injustice and health disparities that exist on a global scale. Some of the recommendations involve policy initiatives; others, such as research and mentorship, fall within the traditional domain of public health practice. In this paper, special attention is given to concerned environmental and occupational health professionals using evidence-based data for advocacy. For lasting changes to be made, however, stronger institutions and legislation are required. Those who have the 'right to know' about environmental injustice issues include communities of concern, workers' representatives and lawyers. Government officials and company officials may eventually work on the basis of conflict resolution, compensation and remediation, to quote some examples. Systematic approaches to protect both the environment and public health must be updated.

  18. Combined biological treatment of sinter plant waste water, blast furnace gas scrubber water polluted groundwater and coke plant effluent

    Energy Technology Data Exchange (ETDEWEB)

    Antoine van Hoorn [Corus Staal, IJmuiden (Netherlands)

    2006-07-01

    Waste water from the Corus coke plant in IJmuiden had been handled by the activated sludge process since start-up in 1972 but in the eighties it was clear that although this removed most phenols, the rest of the COD and thiocyanate must also be removed before discharge. The paper describes the original water treatment process and the higher pressure gas scrubber system for removal of SO{sub 2}, heavy metals and other harmful components. It goes on to describe development of a combined biological treatment system, the heart of which is the so-called Bio 2000. The performance of this new plant is discussed. COD concentrations are very constant but Total Kjeldahl Nitrogen (TKN) concentrations fluctuate. COD, TKN and heavy metals are in compliance but cyanide and suspended solids are not always so. A method of overcoming this is being sought. This paper was presented at a COMA meeting in March 2005 held in Scunthorpe, UK. 10 figs., 2 tabs.

  19. MOTION TO CHANGE VENUE. CASE STUDY

    Directory of Open Access Journals (Sweden)

    Dragoş Lucian Rădulescu

    2015-11-01

    Full Text Available Change of venue is a remedy offered to a party, which in case of legitimate grounds for suspicion or public safety may require that proceedings belong to another court than the court first seized. But change of venue is not based on a case of material or territorial lack of jurisdiction of the court, taking into account exceptional circumstances or impartiality doubt regarding the case. Thus, article 140 of the Code of Civil Procedure stipulates the possible causes of change of venue, including further issues that will determine jurisdiction to hear by the courts of control.

  20. Guidelines for Conducting Positivist Case Study Research in Information Systems

    Directory of Open Access Journals (Sweden)

    Graeme Shanks

    2002-11-01

    Full Text Available The case study research approach is widely used in a number of different ways within the information systems community. This paper focuses on positivist, deductive case study research in information systems. It provides clear definitions of important concepts in positivist case study research and illustrates these with an example research study. A critical analysis of the conduct and outcomes of two recently published positivist case studies is reported. One is a multiple case study that validated concepts in a framework for viewpoint development in requirements definition. The other is a single case study that examined the role of social enablers in enterprise resource planning systems implementation. A number of guidelines for successfully undertaking positivist case study research are identified including developing a clear understanding of key concepts and assumptions within the positivist paradigm; providing clear and unambiguous definitions of the units and interactions when using any theory; carefully defining the boundary of the theory used in the case study; using hypotheses rather than propositions in the empirical testing of theory; using fuzzy or probabilistic propositions in recognising that reality can never be perfectly known; selecting case studies carefully, particularly single case studies; and recognising that generalisation from positivist, single case studies is inherently different from generalisation from single experiments. When properly undertaken, positivist, deductive case study research is a valuable research approach for information systems researchers, particularly when used within pluralist research programs that use a number of different research approaches from different paradigms.

  1. Bilingual education in Slovakia: A Case Study

    Directory of Open Access Journals (Sweden)

    Silvia Pokrivčáková

    2013-06-01

    Full Text Available Bilingual education is one of the areas in contemporary education that brings out some important controversies (philosophical, conceptual, sociological, political, economical, etc. and thus calls for extensive and intensive debate. Bilingual education in Europe (and here the European Union countries are meant has gained a very different status, due to the general European policy of developing language diversity and promoting “European plurilingualism and multilingualism”. In Slovakia, one of the younger members of the EU, bilingual education became an extraordinarily popular instrument for the fulfilment of this task.  Since the specifically defined topic of bilingual education and its current status in Slovakia has not been studied and systematically reviewed yet, the research presented in this paper was designed as a single-phenomenon revelatory case study investigating seven research areas: reflection of bilingual education in school legislation and state pedagogical documents, purposes of bilingual education in Slovakia, its organization (levels and types of schools, foreign languages incorporated, teachers, structure of bilingual schools curricula, types of bilingual education applied at Slovak bilingual schools, and how bilingual education is both reflected in and saturated by the latest research findings. The conclusions presented in the paper were collected from multiple sources: state curriculum, statistical data published by the Slovak Ministry of Education or its partner institutions, international treaties on establishing and supporting bilingual sections of schools, bilingual schools curricula, interviews with school directors, teachers, and learners, direct observations at bilingual schools, research studies and research reports, etc. In the conclusion, bilingual education in Slovakia is identified as a unique, dynamically developing system which is both significantly shaped by the foreign language education policy promoted by

  2. Jane: A Case Study in Anorexia Nervosa.

    Science.gov (United States)

    Willingham, Barbara

    1988-01-01

    The article reports the case history of a 15-year-old Australian girl with anorexia nervosa. Information is also given on prevalence, causes, definitions, and treatments including hospitalization, co-therapy, psychotherapy, behavior modification, family therapy, and counseling. (DB)

  3. Case Study Research in Software Engineering Guidelines and Examples

    CERN Document Server

    Runeson, Per; Rainer, Austen; Regnell, Bjorn

    2012-01-01

    Based on their own experiences of in-depth case studies of software projects in international corporations, in this book the authors present detailed practical guidelines on the preparation, conduct, design and reporting of case studies of software engineering.  This is the first software engineering specific book on the case study research method.

  4. Cases for the Net Generation: An Empirical Examination of Students' Attitude toward Multimedia Case Studies

    Science.gov (United States)

    Sheppard, Michael; Vibert, Conor

    2016-01-01

    Case studies have been an important tool in business, legal, and medical education for generations of students. Traditional text-based cases tend to be self-contained and structured in such a way as to teach a particular concept. The multimedia cases introduced in this study feature unscripted web-hosted video interviews with business owners and…

  5. Teaching Business French through Case Studies: Presentation of a Marketing Case.

    Science.gov (United States)

    Federico, Salvatore; Moore, Catherine

    The use of case studies as a means for teaching business French is discussed. The approach is advocated because of the realism of case studies, which are based on actual occurrences. Characteristics of a good case are noted: it tells a story, focuses on interest-arousing issues, is set in the past 10 years, permits empathy with the main…

  6. Case Study: What Makes a Good Case, Revisited: The Survey Monkey Tells All

    Science.gov (United States)

    Herried, Clyde Freeman; Prud'homme-Genereux, Annie; Schiller, Nancy A.; Herreid, Ky F.; Wright, Carolyn

    2016-01-01

    This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. In this month's issue the authors provide a more definitive answer to the "What Makes a Good Case?" question based on a just-completed Survey Monkey survey given to NCCSTS teachers.

  7. Increasing transmission capacity : case studies and techniques

    Energy Technology Data Exchange (ETDEWEB)

    Reisdorff, R.A. [Laminated Wood Systems, NE (United States)

    2007-07-01

    Many companies are stretching the capacities of their mature transmission lines as a result of deregulation in the electric utility industry. Since electric utilities are no longer in control of new generation locations or capacities, their mission has changed from supplying electricity to regional customers to that of the movement of power over their grid. There will also be even more pressure to maximize the thermal capacity of existing transmission lines once the regional transmission operators (RTOs) are in place. Various methods including conductor replacement or increasing structure height are available options to accomplish this. This paper discussed the available methods to increase ground clearance, including structure changeouts; pole top extensions; nip and tuck conductor; adding mid-span structures; and raising structures. Because the actual cost of line outages for maintenance of rebuild work will make many present day work procedures obsolete, the industry is changing to methods of safely increasing the existing structure heights without removing the line from service. The paper also presented the Phaiseraiser product which is a patented system, consisting of double steel members that are either single or multiple piece units which are used to support the raised structure. The paper discussed the product development of the Phaiseraiser product, with reference to wood stubs; pier foundation; pole enforcer methodology; testing; designs; and ordering requirements. Last, the paper discussed a custom designed installation tool package developed by Laminated Wood Systems (LWS); LWS structural analysis; estimated cost for Phaiseraiser installation on an h-frame; labor resources and training; maintenance considerations; completed Phaiseraiser projects; and a case study on the Omaha Public Power District. figs.

  8. Zimbabwe's national AIDS levy: A case study.

    Science.gov (United States)

    Bhat, Nisha; Kilmarx, Peter H; Dube, Freeman; Manenji, Albert; Dube, Medelina; Magure, Tapuwa

    2016-01-01

    We conducted a case study of the Zimbabwe National AIDS Trust Fund ('AIDS Levy') as an approach to domestic government financing of the response to HIV and AIDS. Data came from three sources: a literature review, including a search for grey literature, review of government documents from the Zimbabwe National AIDS Council (NAC), and key informant interviews with representatives of the Zimbabwean government, civil society and international organizations. The literature search yielded 139 sources, and 20 key informants were interviewed. Established by legislation in 1999, the AIDS Levy entails a 3% income tax for individuals and 3% tax on profits of employers and trusts (which excluded the mining industry until 2015). It is managed by the parastatal NAC through a decentralized structure of AIDS Action Committees. Revenues increased from inception to 2006 through 2008, a period of economic instability and hyperinflation. Following dollarization in 2009, annual revenues continued to increase, reaching US$38.6 million in 2014. By policy, at least 50% of funds are used for purchase of antiretroviral medications. Other spending includes administration and capital costs, HIV prevention, and monitoring and evaluation. Several financial controls and auditing systems are in place. Key informants perceived the AIDS Levy as a 'homegrown' solution that provided country ownership and reduced dependence on donor funding, but called for further increased transparency, accountability, and reduced administrative costs, as well as recommended changes to increase revenue. The Zimbabwe AIDS Levy has generated substantial resources, recently over US$35 million per year, and signals an important commitment by Zimbabweans, which may have helped attract other donor resources. Many key informants considered the Zimbabwe AIDS Levy to be a best practice for other countries to follow.

  9. Simpson's paradox: A statistician's case study.

    Science.gov (United States)

    Chu, Kevin H; Brown, Nathan J; Pelecanos, Anita; Brown, Anthony Ft

    2018-02-26

    Gender equality and workforce diversity has recently been in the forefront of College discussions. Reasons for the difference between various groups may not be as they initially appeared. The results of comparing the outcome between two groups can sometimes be confounded and even reversed by an unrecognised third variable. This concept is known as Simpson's Paradox, and is illustrated here using a renowned case study on potential gender bias for acceptance to Graduate School at the University of California, Berkeley.  The investigation showed that males were 1.8 times more likely to be admitted to Graduate School than females in 1973. Initially it appeared that women were discriminated against in the selection process. However, when admissions were re-examined at individual Departments of the School, admission tended to be better for women than men in four of six Departments. This contradiction or paradox tells us that the association between admission and gender was dependent upon on Department.  The confounding effect of Department was defined by two characteristics. Firstly, a strong association between Department and admission: some Departments admitted much smaller percentages of applicants than others. Secondly, a strong association between Department and gender: females tended to apply to Departments with lower admission rates.  The explanation of differences between groups can be multifactorial. A search for possible confounders will assist in this understanding. This could apply whenever two groups initially appear to differ, but on closer analysis this difference is either unfounded, or even reversed by reference to a third, confounding variable. © 2018 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

  10. Mathematical modelling with case studies using Maple and Matlab

    CERN Document Server

    Barnes, B

    2014-01-01

    Introduction to Mathematical ModelingMathematical models An overview of the book Some modeling approaches Modeling for decision makingCompartmental Models Introduction Exponential decay and radioactivity Case study: detecting art forgeries Case study: Pacific rats colonize New Zealand Lake pollution models Case study: Lake Burley Griffin Drug assimilation into the blood Case study: dull, dizzy, or dead? Cascades of compartments First-order linear DEs Equilibrium points and stability Case study: money, money, money makes the world go aroundModels of Single PopulationsExponential growth Density-

  11. Studies on five cases of radiation enterocolitis

    Energy Technology Data Exchange (ETDEWEB)

    Yasunaga, Akira; Shibata, Okihiko; Kubo, Hironobu; Tomonari, Kazuhide; Hadama, Tetsuo; Uchida, Yuzou; Shirabe, Joji (Oita Medical Coll. (Japan))

    1990-05-01

    Five patients with radiation enterocolitis who were surgically treated are reported. The 5 patients had received irradiation therapy more than 5,000 rad for ginecologic malignancies. The period for the onset of symptoms of irradiation enteritis ranged from 8 months to 20 years however, 3 of them developed the symptoms within one year after irradiation therapy. Emergency surgery was carried out for bowel obstruction in 3 cases and for intestinal perforation in 2 cases. Bowel resection and primary anastomosis were performed by a one-step approach in 4 of them. Transient colostomy as preventive measure was added in 2 cases. It is very important for the one-step approach to resect the intestine at the healthy part far from the lesion of irradiation enteritis and to add a transient colostomy to prevent anastomolic insufficiency. Furthermore, suture material should be used less tissue reactive one. (author).

  12. Studies on five cases of radiation enterocolitis

    International Nuclear Information System (INIS)

    Yasunaga, Akira; Shibata, Okihiko; Kubo, Hironobu; Tomonari, Kazuhide; Hadama, Tetsuo; Uchida, Yuzou; Shirabe, Joji

    1990-01-01

    Five patients with radiation enterocolitis who were surgically treated are reported. The 5 patients had received irradiation therapy more than 5,000 rad for ginecologic malignancies. The period for the onset of symptoms of irradiation enteritis ranged from 8 months to 20 years however, 3 of them developed the symptoms within one year after irradiation therapy. Emergency surgery was carried out for bowel obstruction in 3 cases and for intestinal perforation in 2 cases. Bowel resection and primary anastomosis were performed by a one-step approach in 4 of them. Transient colostomy as preventive measure was added in 2 cases. It is very important for the one-step approach to resect the intestine at the healthy part far from the lesion of irradiation enteritis and to add a transient colostomy to prevent anastomolic insufficiency. Furthermore, suture material should be used less tissue reactive one. (author)

  13. A clinico-pathological study of 70 cases of pemphigus

    Directory of Open Access Journals (Sweden)

    Arya S

    1999-01-01

    Full Text Available A clinicopalhological study of 70 cases of pemphigus observed over a span of four and a half years from January 1992 to June 1996 at the Sir J.J. Group of Hospitals and Grant Medical College, Mumbai is reported. Pemphigus vulgaris constituted the single largest group of 43 cases, followed by pemphigus foliaceus (25 cases and pemphigus vegetans (2 cases. Majority of the cases were seen in the age group of 21-60 years, with a slight male predominance. The youngest patient was 14 years while the eldest was aged 75 years. Mucosal involvement was seen in 31 cases of pemphigus vulgaris, as opposed to only 5 cases of pemphigus foliaceus. Flaccid bullae were present in 100% cases. Pruritus was complained of in 14 cases, though it was more common in pemphigus vegetans and vulgaris. Salient histopathological features of pemphigus vulgaris observed were (I intraepidermal suprabasal blisters (35 cases, (2 presence of acantholytic cells (40 cases, (3 "Row of tombstone appearance" (I8 cases and (4 acantholysis involving follicular sheath (20 cases. Main histopathological features of pemphigus foliaceus were (1 subcorneal blister (15 case, (2 acantholysis (24 cases and (3 bulla cavity containing inflammatory infiltrate (12 cases. Both cases of pemphigus vegetans showed hyperkeratosis, papillomatosis and irregular acanthosis with intra-epidermal eosinophilic abscesses besides suprabasal lacunae.

  14. Antenatal stress: An Irish case study.

    LENUS (Irish Health Repository)

    Carolan-Olah, Mary

    2013-05-16

    BACKGROUND:: stress in pregnancy is common and impacts negatively on women, infants and families. A number of factors contribute to high levels of stress in pregnancy, including financial concerns, marital discord, low support systems and low socio-economic status. OBJECTIVES:: the aim of this study was to evaluate stress anxiety levels and depressive symptoms among low risk women in an area in Ireland that was particularly impacted by the 2008 economic crisis. DESIGN:: a quantitative descriptive cross-sectional design was used. Data were collected using the Edinburgh Postnatal Depression Scale (EPDS), the Perceived Stress Scale and the State Trait Anxiety Inventory (STAI). Data was collected at a single time during the second trimester. SETTING:: this paper reports a case study of one maternity service in Ireland. Participants included low risk pregnant women who were attending the hospital clinic for routine antenatal care. RESULTS:: of 150 questionnaires distributed, 74 completed questionnaires were returned indicating a 49.3% return rate. Findings indicated high levels of stress, anxiety and depressive symptomatology among participants. There were no significant difference in mean EPDS score for different age groups (F4,69=2.48, P=0.052), living arrangements (F4,68=0.90, P=0.5) or usual occupation (F4,69=1.45, P=0.2). A score of ≥12 was taken as indicative of probable antenatal depression and 86.5% of participants responded with a score of 12 or above. PSS scores were also high and more than three quarters of respondents scored ≥15 (75.6%) and more than a third had scores ≥20 (35.1%), out of a total score of 40. There was a significant difference in mean PSS score between the different age groups (F4,69=3.60, P=0.010) but not for living arrangements or usual occupation. A STAI score of ≥39 was taken as indicative of antenatal anxiety, and 74.3% of participants responded with a score of 39 or above. There were no significant differences in mean STAI

  15. The Analysis of a Murder, a Case Study

    Science.gov (United States)

    Dinan, Frank J.; Szczepankiewicz, Steven H.; Carnaham, Melinda; Colvin, Michael T.

    2007-01-01

    The analysis of a Murder case study can be used in general chemistry or nonscience major chemistry courses to teach data handling and analysis in a non-laboratory context. This case study will help students to respond more enthusiastically and with more interest to a set of material placed before them related to a real case rather than…

  16. A case study of a Cuban government institution

    International Nuclear Information System (INIS)

    Nunez, A.L.; Vazquez, A.; Cruz Cabrera, L.

    2004-01-01

    The aim of this contribution is to present a case study on the partial implementation of a knowledge management system in an institution. In this case the knowledge management has been directed toward the best performance of the organization. The tool used in case study can be implemented at any institution, including institutions of nuclear or radiological profiles. (author)

  17. DDACE cogeneration systems : 10 case studies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    DDACE Power Systems are experts in green energy power generation and provide solutions that deal with waste and industrial by-products. The company develops practical energy solutions that address environmental and financial concerns facing both industrial and municipal customers. The following 10 case studies are examples of the installations that DDACE Power Systems have completed in recent years: (1) a combined heat and emergency power installation on the roof of a 19 storey apartment building on Bloor Street in Toronto, Ontario. The cogeneration package provides electricity and heat to the entire building, replacing an old diesel generator, (2) a combined heat and emergency power installation at the Villa Colombo extended care facility in Vaughan, Ontario. The cogeneration system provides heat and power to the building, as well as emergency power, (3) emergency standby power with demand response capabilities at Sobeys Distribution Warehouse in Vaughan, Ontario. The primary purpose of the 2.4 MW low emission, natural gas fuelled emergency standby generator is to provide emergency power to the building in the event of a grid failure, (4) a dual fuel combined heat and power installation at the Queensway Carleton Hospital in Ottawa, Ontario that provides electricity, hot water and steam to all areas of the hospital, (5) a tri-generation installation at the Ontario Police College in Aylmer, Ontario which provides power and heat to the building as well as emergency power in the event of a grid failure. An absorption chiller provides cooling in the summer and an exhaust emission control system reduces NOx emissions, (6) a biomass gasification installation at Nexterra Energy in Kamloops, British Columbia. The 239 kW generator is fueled by synthesis gas, (7) biogas utilization at Fepro Farms in Cobden, Ontario for treatment of the facility's waste products. The biogas plant uses cow manure, as well as fats, oil and grease from restaurants to produce electricity and

  18. Capturing Cultural Glossaries: Case-study I *

    Directory of Open Access Journals (Sweden)

    Matete Madiba

    2011-10-01

    Full Text Available

    Abstract: This article is a presentation of a brief cultural glossary of Northern Sotho cooking terms. The glossary is mainly composed of names for utensils and ingredients, and action words for the processes involved in the preparation of cultural dishes. It also contains names of dishes tied to some idiomatic expressions in a way eliciting cultural experiences that can lead to an under-standing of indigenous knowledge systems. The article seeks to explore ways of capturing cultural glossaries to feed into the national dictionary corpora by using a case-study approach to investigate the processes that led to the generation of this specific school-based project. A number of issues that surfaced in this project, can possibly serve as models for the collection of authentic glossaries that can support dictionary making in African languages.

    Keywords: CULTURAL GLOSSARY, INDIGENOUS KNOWLEDGE SYSTEMS, CULTURAL TERMINOLOGY, CORPUS, AUTHENTIC GLOSSARY, CONTEXTUALISATION, MARGIN-ALIZED LANGUAGES, OUTCOMES-BASED EDUCATION, PERFORMANCE INDICATOR, ASSESSMENT CRITERIA, RANGE STATEMENT, TRADITIONAL DISHES, LANGUAGE VAL-ORISATION, SIMULTANEOUS FEEDBACK, COMMUNICATIVE APPROACH, STRUCTURAL APPROACH, METONYMY

    Opsomming: Die totstandbrenging van kulturele woordversamelings: Ge-vallestudie I. Hierdie artikel is 'n aanbieding van 'n kort kulturele woordversameling van Noord-Sothokookterme. Die woordversameling bestaan hoofsaaklik uit die name van gereedskap en bestanddele, en handelingswoorde vir die prosesse betrokke by die voorbereiding van kulturele geregte. Dit bevat ook name van geregte wat verbind is met sekere idiomatiese uitdrukkings wat op 'n manier kulturele ervarings oproep wat kan lei tot die verstaan van inheemse kennisstelsels. Die artikel probeer om maniere te ondersoek waarop kulturele woordversamelings in die nasionale woordeboekkorpusse ingevoer kan word deur 'n gevallestudiebenadering te volg om die prosesse te ondersoek wat tot die

  19. Case studies: Soil mapping using multiple methods

    Science.gov (United States)

    Petersen, Hauke; Wunderlich, Tina; Hagrey, Said A. Al; Rabbel, Wolfgang; Stümpel, Harald

    2010-05-01

    Soil is a non-renewable resource with fundamental functions like filtering (e.g. water), storing (e.g. carbon), transforming (e.g. nutrients) and buffering (e.g. contamination). Degradation of soils is meanwhile not only to scientists a well known fact, also decision makers in politics have accepted this as a serious problem for several environmental aspects. National and international authorities have already worked out preservation and restoration strategies for soil degradation, though it is still work of active research how to put these strategies into real practice. But common to all strategies the description of soil state and dynamics is required as a base step. This includes collecting information from soils with methods ranging from direct soil sampling to remote applications. In an intermediate scale mobile geophysical methods are applied with the advantage of fast working progress but disadvantage of site specific calibration and interpretation issues. In the framework of the iSOIL project we present here some case studies for soil mapping performed using multiple geophysical methods. We will present examples of combined field measurements with EMI-, GPR-, magnetic and gammaspectrometric techniques carried out with the mobile multi-sensor-system of Kiel University (GER). Depending on soil type and actual environmental conditions, different methods show a different quality of information. With application of diverse methods we want to figure out, which methods or combination of methods will give the most reliable information concerning soil state and properties. To investigate the influence of varying material we performed mapping campaigns on field sites with sandy, loamy and loessy soils. Classification of measured or derived attributes show not only the lateral variability but also gives hints to a variation in the vertical distribution of soil material. For all soils of course soil water content can be a critical factor concerning a succesful

  20. Tuberculosis of breast (study of 7 cases.

    Directory of Open Access Journals (Sweden)

    Sharma P

    1991-01-01

    Full Text Available Seven cases of tuberculosis of breast are presented. The clinical features were multiple discharging sinuses, lump, ulcer and recurring abscess of breast. Diagnosis relied on histological appearance. Acid fast bacilli being present in only one specimen and positive culture obtained in one patient. Successful treatment combines antituberculous drug therapy with removal of infected breast tissue.

  1. Case Studies and Monitoring of Deep Excavations

    NARCIS (Netherlands)

    Korff, M.

    2017-01-01

    Several case histories from Dutch underground deep excavation projects are presented in this paper, including the lessons learned and the learning processes involved. The focus of the paper is on how the learning takes places and how it is documented. It is necessary to learn in a systematic and

  2. Prayer Healing: A Case Study Research Protocol

    NARCIS (Netherlands)

    Kruijthoff, D.J.; van der Kooi, C.; Glas, Gerrit; Abma, Tineke A

    2017-01-01

    Context • Prayer healing is a common practice in many religious communities around the world. Even in the highly secularized Dutch society, cases of prayer healing are occasionally reported in the media, often generating public attention. There is an ongoing debate regarding whether such miraculous

  3. Adjustment Following Disability: Representative Case Studies.

    Science.gov (United States)

    Heinemann, Allen W.; Shontz, Franklin C.

    1984-01-01

    Examined adjustment following physical disability using the representative case method with two persons with quadriplegia. Results highlighted the importance of previously established coping styles as well as the role of the environment in adjustment. Willingness to mourn aided in later growth. (JAC)

  4. A Case Study on Idiopathic Orbital Pseudotumor: Surgery and ...

    African Journals Online (AJOL)

    This is a case study of five isolated orbital nerve inflammatory pseudotumor cases ... Optic disk edema was observed by ophthalmoscopy. ... The patients on clinical examination were found to have protrusion, reduced visual acuity of the right ...

  5. Mucocele - A study of 36 cases

    Directory of Open Access Journals (Sweden)

    Jani Dhaval

    2010-01-01

    Full Text Available Background: Mucocele is one of the most common benign soft tissue tumor present in the oral cavity. They are of two types - one is extravasation and second one is retention type but the majority are extravasation type. Aims: The objective is to determine various factors related to mucocele such as role of trauma due to nearby teeth, recurrence, duration, and to find out whether there is any role of psychological stress which initiates trauma like lip or cheek biting. Materials and Methods: 36 cases of mucocele diagnosed at the Department of the Oral Pathology, Govt. Dental College and Hospital, Ahmedabad, between 2004 and 2008 were reviewed. The clinical data were recorded and histopathologic diagnosis was made. Statistical Analysis Used: Data analysis tool, Microsoft Office Excel 2007. Results: A diagnosis of mucocele was established in 36 cases with male-to-female ratio of 1.77:1. Most common type was extravasation in 30 (83.33% cases. The peak age of occurrence was between 1st and 3rd decade. Lateral side of the lower labial mucosa was the most affected site in 34 (94.44% cases. The history of trauma appeared the major etiological factor seen in 28 (77.77% cases. Conclusion: We conclude that there was male predominance and they were more affected in 2nd and 3rd decade. The lateral side of lower labial mucosa was the commonest site and the trauma due to teeth or lip biting was the major etiological factor for the occurrence of the mucocele. The article highlights role of psychological stress in occurrence of mucocele. The reader should understand the importance of histopathology examination and should try to control the psychological stress in such mucocele patients.

  6. Identification of Ambiguity in the Case Study Research Typology

    DEFF Research Database (Denmark)

    Grünbaum, Niels Nolsøe

    2015-01-01

    . Relevant to varied levels and scales of case study use, the aim of this collection is to provide readers with a comprehensive overview of where we are now with case study research, so that they may better judge their own applications of the case study. From definitions to interdisciplinary methods......The purpose of this four volume collection is to provide an accessible selection of the best writing on case study in the English language internationally. Such a collection is timely and highly relevant to students, researchers and academics in higher education, especially when the case......, this set will address the practical case study by offering a structured selection of some of the best modern and classic writing on the case study in article form, together with a synoptic editorial introduction and overview of the field of research....

  7. Delusional parasitosis--study of 3 cases.

    Directory of Open Access Journals (Sweden)

    Hanumantha K

    1994-10-01

    Full Text Available Delusional disorder-somatic (parasitosis type is a rare psychiatric disorder which poses a challenge to diagnostic and therapeutic skills. Pimozide, a highly specific dopamine blocker has shown promising results in the 3 cases illustrated here. These cases were seen over a period of 3 years. All the three patients believed that an insect has entered through the ear and is burrowing tracts/laying multiple eggs. They approached the ENT surgeons or neurosurgeon with a fear that their brain will be invaded. On psychiatric evaluation, no past or present history of major psychiatric illness was found. Premorbid personalities were well adjusted. Only for two patients, acute moderate stressors were detected. Delusions disappeared by the end of 2 wks but therapy was continued for 5 months.

  8. Fetal tachyarrhythmia: literature data and case study

    Directory of Open Access Journals (Sweden)

    Lukianova I.S.

    2016-03-01

    Full Text Available Fetal tachyarrhythmia is unfeigned in most cases and occurs in about 1–3% of the total number of pregnancies. Most of it's kinds are ectopic intraatrial reductions. FA is usually diagnosed during the routine, starting from 18 weeks of gestation, ultrasound assessment of the fetal heart rate. Approximately 10% of fetuses with rhythm disorders are at high risk of sudden death. Supraventricular tachycardia and atrial fibrillation are the most common causes of sudden death, the same is observed for bradyarrhythmias: manifest sinus bradycardia (hypoxic genesis and expressed AV-blockade. The examination of all fetuses with arrhythmia was strongly recommended in cases of intrauterine cardiac arrest or death of the fetus in families. Arrhythmias which have been revealed during scheduled prenatal examination of the fetuses are in need of expert echocardiography assessment to determine the extent of possible pre- and postnatal risk of sudden death and the paril of arrhythmogenic cardiomyopathy formation. In case of identified life-threatening arrhythmia in fetus the pharmacological therapy, which greatly affects the favorable outcome is strongly recommended. It should be based on hemodynamic of pregnant and aimed to prevent the development of decompensation or arrhythmogenic cardiomyopathy.

  9. Orbital dermoid and epidermoid cysts: Case study

    Directory of Open Access Journals (Sweden)

    Veselinović Dragan

    2010-01-01

    Full Text Available Introduction. Dermoid and epidermoid cysts of the orbit belong to choristomas, tumours that originate from the aberrant primordial tissue. Clinically, they manifest as cystic movable formations mostly localized in the upper temporal quadrant of the orbit. They are described as both superficial and deep formations with most frequently slow intermittent growth. Apart from aesthetic effects, during their growth, dermoid and epidermoid cysts can cause disturbances in the eye motility, and in rare cases, also an optical nerve compression syndrome. Case Outline. In this paper, we described a child with a congenital orbital dermoid cyst localized in the upper-nasal quadrant that was showing signs of a gradual enlargement and progression. The computerized tomography revealed a cyst of 1.5-2.0 cm in size. At the Maxillofacial Surgery Hospital in Niš, the dermoid cyst was extirpated in toto after orbitotomy performed by superciliary approach. Postoperative course was uneventful, without inflammation signs, and after two weeks excellent functional and aesthetic effects were achieved. Conclusion. Before the decision to treat the dermoid and epidermoid cysts operatively, a detailed diagnostic procedure was necessary to be done in order to locate the cyst precisely and determine its size and possible propagation into the surrounding periorbital structures. Apart from cosmetic indications, operative procedures are recommended in the case of cysts with constant progressions, which cause the pressure to the eye lobe, lead to motility disturbances and indirectly compress the optical nerve and branches of the cranial nerves III, IV and VI.

  10. Case study: Malingering or multiple personality disorder?

    Directory of Open Access Journals (Sweden)

    Alba García-Cortés

    2017-03-01

    Full Text Available The dissociative identity disorder (DID can be considered a rare disorder because of its seemingly low prevalence. However, in recent years it points to the possible underdiagnosis because its complexity and confusion at the time of differential diagnosis. On the other hand, the malingering of mental psychopathology can have a major socio-economic and legal impact, particularly important in this type of disorder, given the inability it generates and its complex diagnostic. This paper refers the case of a patient admitted to the short-term hospitalization unit of Dr. Rodríguez Lafora Hospital (Madrid with depressive symptoms. Then the patient seemed to become a TID case. The evaluation consisted of a psychological history and the application of the Structured Inventory of Malingered Symptoms (SIMS and the Millon Clinical Multiaxial Inventory (MCMI-II. The results showed an altered personality profile as well as likely malingered symptoms, what prevented us from a DID diagnosis. In view of the results, possible implications of this case for the clinical setting are discussed.

  11. Growth responses of selected freshwater algae to trace elements and scrubber ash slurry generated by coal-fired power plants

    Energy Technology Data Exchange (ETDEWEB)

    Vocke, R.W.

    1979-01-01

    The development and implementation of standard toxicity tests is a necessity if consistent and reliable data are to be obtained for water quality criteria. The adapted EPA AAPBT is an ideal static algal toxicity test system. The algal test medium has a chemical composition similar to natural unpolluted waters of low ionic strength. It is appropriate to use MATC water quality criteria when assessing the potential impact of pollutants generated by coal-fired power stations because these energy-generated pollutants typically enter aquatic systems in small quantities over long periods. The MATC water quality criteria are estimates of trace element and SASE levels, based on the most sensitive alga investigated, that will not cause significant changes in naturally-functioning algal populations. These levels are 0.016f mg L/sup -1/ As(V), 0.001 mg L/sup -1/ Cd(II), 0.004 mg L/sup -1/ Hg(II), 0.006 mg L/sup -1/ Se(VI), and 0.344% SASE. To provide viable working water quality criteria, an extrapolation from the laboratory to the natural environment must be made. Therefore, those oxidation states of the trace elements were selected which are the dominant states occurring in natural, unpolluted, slightly alkaline freshwaters. It must be pointed out that these MATC values are based on algal responses to single toxicants and no allowance is made for synergistic, additive, or antagonistic relationships which could occur in natural aquatic systems. Additionally, natural chelation may influence toxicity. The highly toxic nature of potential pollutants from coal-fired generating plants emphasizes the need for minimizing stack effluent pollutants and retaining scrubber ash slurry for proper disposal in an effort to maintain trace elements in concentration ranges compatible with naturally-functioning ecosystems.

  12. Treatment of ferrous-NTA-based NO x scrubber solution by an up-flow anaerobic packed bed bioreactor.

    Science.gov (United States)

    Chandrashekhar, B; Sahu, Nidhi; Tabassum, Heena; Pai, Padmaraj; Morone, Amruta; Pandey, R A

    2015-06-01

    A bench scale system consisting of an up-flow packed bed bioreactor (UAPBR) made of polyurethane foam was used for the treatment and regeneration of aqueous solution of ferrous-NTA scrubbed with nitric oxide (NO). The biomass in the UAPBR was sequentially acclimatized under denitrifying and iron reducing conditions using ethanol as electron donor, after which nitric oxide (NO) gas was loaded continuously to the system by absorption. The system was investigated for different parameters viz. pH, removal efficiency of nitric oxide, biological reduction efficiency of Fe(II)NTA-NO and COD utilization. The Fe(II)NTA-NO reduction efficiency reached 87.8 % at a loading rate of 0.24 mmol L(-1) h(-1), while the scrubber efficiency reached more than 75 % with 250 ppm NO. Stover-Kincannon and a Plug-flow kinetic model based on Michaelis-Menten equation were used to describe the UAPBR performance with respect to Fe(II)NTA-NO and COD removal. The Stover-Kincannon model was found capable of describing the Fe(II)NTA-NO reduction (R m = 8.92 mM h(-1) and K NO = 11.46 mM h(-1)) while plug-flow model provided better fit to the COD utilization (U m = 66.62 mg L(-1) h(-1), K COD = 7.28 mg L(-1)). Analyses for pH, Fe(III)NTA, ammonium, nitrite concentration, and FTIR analysis of the medium samples indicated degradation of NTA, which leads to ammonium and nitrite accumulation in the medium, and affect the regeneration process.

  13. Supply chain strategy: empirical case study in Europe and Asia:

    OpenAIRE

    Sillanpää, Ilkka; Sillanpää, Sebastian

    2014-01-01

    The purpose of this case study research is to present a literature review of supply chain strategy approaches, develop supply chain strategy framework and to validate a framework in empirical case study. Literature review and case study research are the research methods for this research. This study presents the supply chain strategy framework which merges together business environment, corporate strategy, supply chain demand and supply chain strategy. Research argues that all the different c...

  14. Case Studies in the Field of Marketing Education: Learner Impact, Case Performance, and Cost Efficiency

    Science.gov (United States)

    Spais, George S.

    2005-01-01

    The major objective of this study is to identify a methodology that will help educators in marketing to efficiently manage the design, impact, and cost of case studies. It is my intention is to examine the impact of case study characteristics in relation to the degree of learner involvement in the learning process. The author proposes that…

  15. Using Online Case Studies to Enhance Teacher Preparation

    Science.gov (United States)

    Richman, Laila

    2015-01-01

    The purpose of this study was to assess the impact interactive, online case studies have on learning for preservice teachers. More specifically, it evaluated whether the use of online case studies in instruction could enhance the level of knowledge the preservice teacher gained from the content material. This study utilized a nonequivalent group,…

  16. Epidemiological follow-up study of Japanese Thorotrast cases

    International Nuclear Information System (INIS)

    Mori, T.; Maruyama, T.; Kato, Y.; Takahashi, S.

    1979-01-01

    The authors conducted a follow-up study on 243 Thorotrast-administered war-wounded ex-servicemen in 1975, after a lapse of 30 to 38 years from Thorotrast injections, and found 18 cases of malignant hepatic tumor, 15 cases of other malignant tumors, 2 cases of blood diseases, and 9 cases of liver cirrhosis in 224 cases who had been given Thorotrast intravascularly. The incidence of hepatic and other malignant tumors, blood diseases, and liver cirrhosis was significantly higher than in the controls. The total number of deaths in the Thorotrast-administered cases was also significantly higher than in the controls. In the remaining 19 cases who had been given Thorotrast by a route other than intravascularly, no fatal case related to Thorotrast administration was discovered. In the living cases, however, one sarcoma was observed to have developed at the site of the Thorotrast injection

  17. Qualitative case study methodology in nursing research: an integrative review.

    Science.gov (United States)

    Anthony, Susan; Jack, Susan

    2009-06-01

    This paper is a report of an integrative review conducted to critically analyse the contemporary use of qualitative case study methodology in nursing research. Increasing complexity in health care and increasing use of case study in nursing research support the need for current examination of this methodology. In 2007, a search for case study research (published 2005-2007) indexed in the CINAHL, MEDLINE, EMBASE, PsychINFO, Sociological Abstracts and SCOPUS databases was conducted. A sample of 42 case study research papers met the inclusion criteria. Whittemore and Knafl's integrative review method guided the analysis. Confusion exists about the name, nature and use of case study. This methodology, including terminology and concepts, is often invisible in qualitative study titles and abstracts. Case study is an exclusive methodology and an adjunct to exploring particular aspects of phenomena under investigation in larger or mixed-methods studies. A high quality of case study exists in nursing research. Judicious selection and diligent application of literature review methods promote the development of nursing science. Case study is becoming entrenched in the nursing research lexicon as a well-accepted methodology for studying phenomena in health and social care, and its growing use warrants continued appraisal to promote nursing knowledge development. Attention to all case study elements, process and publication is important in promoting authenticity, methodological quality and visibility.

  18. Solitary pancreas retransplant: Study of 22 cases

    Directory of Open Access Journals (Sweden)

    Tércio Genzini

    2006-03-01

    Full Text Available Objective: To present our experience with pancreas retransplantin patients previously submitted to simultaneous pancreas-kidneytransplant, pancreas after kidney transplant and pancreastransplant alone. Methods: Between January/1996 and December/2005, 330 pancreas transplants were performed: 308 primarytransplants and 22 (6% retransplants of solitary pancreas. Thefollowing variables were analyzed: patient age; time elapsedbetween the first and the second transplant; causes of loss of thefirst graft; technical characteristics of the transplant andretransplant and the criteria for selecting donors for retransplant.These clinical data were submitted to statistical analysis. Results:The mean age of patients was 34.3 years and the mean elapsedtime between the first and second transplant was 19.3 months.The causes of the first graft loss were venous (8; 35% and arterial(5; 23% thrombosis, chronic rejection (4; 18%, ischemia/reperfusion injury (2, reflux pancreatitis (1, primary non-function(1 and sepsis (1. A second transplant was performed in thesame iliac fossa in 16 patients (72%. Venous drainage wasperformed in the iliac vein in 16 patients (72%, in the inferior venacava in 5 patients (22% and in the portal vein in one patient. 6 allbladder drainage was the technique used in 18 (82% cases andenteric drainage, in 4 patients (18%. Immunosuppressive regimenapplied to all cases was quadruple therapy with antilymphocyteinduction, tacrolimus, mycophenolate mofetil and steroids. Therewas one early death due to sepsis. One-year patient and pancreasgraft survival rates for retransplants were, respectively, 95% and85%. There was no additional risk for removing the pancreas graftat retransplant. Conclusion: Pancreas retransplant was technicallyfeasible in all cases and results similar to those described in theliterature were found for primary pancreas transplant.

  19. Understanding energy poverty - Case study: Tajikistan

    Energy Technology Data Exchange (ETDEWEB)

    Robic, Slavica; Olshanskaya, Marina; Vrbensky, Rastislav; Morvaj, Zoran

    2010-09-15

    Access and affordability to energy services determine the state of energy poverty; however, there is no widely applicable definition of energy poverty and no universal set of measures for its eradication exists. This paper offers a new definition and possible solution for decrease, and eventually eradication, of energy poverty for the specific case of Tajikistan. As eradication of energy poverty needs to go in hand with nature preservation and economic development, authors provide possible approach to decrease of energy poverty in Tajikistan while simultaneously preserving nature and boosting the local economy.

  20. Case studies for developing globally responsible engineers

    OpenAIRE

    Global Dimension in Engineering Education

    2015-01-01

    Document realitzat amb un ajut financer de la Unió Europea. Per poder accedir al material complementari per a docents dels 28 casos estudi que formen el llibre, activeu el "Document relacionat" Col·lecció de 28 casos estudi per a professors d'enginyeria: 1. Rural development and planning in LDCs: the “Gamba Deve – Licoma axis”,district of Caia, Mozambique 2. Reducing the impact of soil erosion and reservoir siltation on agricultural production and water availability: the case stu...