WorldWideScience

Sample records for scientific results obtained

  1. Brief review of topmost scientific results obtained in 2016 at the Joint Institute for Nuclear Research

    International Nuclear Information System (INIS)

    Kravchenko, E.I.; Sabaeva, E.V.

    2017-01-01

    This brief review presents the topmost scientific results obtained in 2016 at the Joint Institute for Nuclear Research in such fields as theoretical and experimental physics, radiation and radiobiological research, accelerators, information technology and computer physics. It also provides information about the publications by JINR staff members and activities carried out at the JINR University Centre in 2016. [ru

  2. Brief review of topmost scientific results obtained in 2015 at the Joint Institute for Nuclear Research

    International Nuclear Information System (INIS)

    Sabaeva, E.V.; Krupko, E.I.

    2016-01-01

    This brief review presents the topmost scientific results obtained in 2015 at the Joint Institute for Nuclear Research in such fields as theoretical and experimental physics, radiation and radiobiological research, accelerators, information technology and computer physics. It also provides information about the publications by JINR staff members, awards given to JINR scientists, and activities carried out at the JINR University Centre in 2015. [ru

  3. Brief review of topmost scientific results obtained in 2013 at the Joint Institute for Nuclear Research

    International Nuclear Information System (INIS)

    Sabaeva, E.V.; Kravchenko, E.I.

    2014-01-01

    This brief review presents the topmost scientific results obtained in 2013 at the Joint Institute for Nuclear Research in such areas as theoretical physics, experimental physics, radiation and radiobiological research, accelerators, information technology and computer physics. It also provides information on the number of publications by JINR staff members, awards given to JINR scientists, and activities carried out at the JINR University Centre in 2013.

  4. Brief review of topmost scientific results obtained in 2014 at the Joint Institute for Nuclear Research

    International Nuclear Information System (INIS)

    Bulatova, V.V.; Sabaeva, E.V.

    2015-01-01

    This brief review presents the topmost scientific results obtained in 2014 at the Joint Institute for Nuclear Research in such fields as theoretical and experimental physics, radiation and radiobiological research, accelerators, information technology and computer physics. It also provides information about the publications by JINR staff members, patents for inventions, awards given to JINR scientists, and activities carried out at the JINR University Centre in 2014. [ru

  5. Review of the scientific results obtained at the research reactor-booster IBR-30 and the Program of investigations at the neutron source IREN

    CERN Document Server

    Furman, W

    2002-01-01

    Brief review of the main scientific results obtained at research reactor booster IBR-30 and its predecessor IBR and IBR-1 for the period 1960 - 2001 is presented. The thesis of the scientific program for the upgrade of IBR-30 resonance neutron source IREN are adduced

  6. Experimental results obtained at GANIL

    International Nuclear Information System (INIS)

    Borrel, V.

    1993-01-01

    A review of experimental results obtained at GANIL on the study of nuclear structure and nuclear reactions with secondary radioactive beams is presented. Mass measurements by means of the GANIL cyclotrons are described. The possibilities of GANIL/LISE3 for the production and separation of radioactive beams are illustrated through a large variety of experiments. (author). 19 refs., 8 figs

  7. Report of scientific results

    International Nuclear Information System (INIS)

    1978-01-01

    The findings of R+D activities of the HMI radiation chemistry department in the fields of pulsed radiolysis, reaction kinematics, insulators and plastics are presented as well as the scientific publications and lectures of HMI staff and visitors including theoretical contributions, theses and dissertations, and conference papers. (HK) [de

  8. Scientific results report 1980

    International Nuclear Information System (INIS)

    1981-01-01

    The report describes in concise form the research tasks and results of the work groups pulsed irradiation, reaction kinematics and insulators and plastics in the field of 'radiation chemistry' of the Hahn-Meitner Institute, Berlin. The main topic of investigation was the kinetics and dynamics of fast chemical processes, the setting-up of chemical reaction mechanisms and research of chemical physical properties of highly reactive species (radicals, ions, electrons). A list of publications and lectures as well as teaching contributions of the institute's scientists, diploma and doctor theses performed in the institute and guest lectures held there is also given. (RB) [de

  9. Scientific results - report 1981

    International Nuclear Information System (INIS)

    1982-01-01

    During the year under report 1981, five working groups were active in the field of nuclear chemistry: neutron diffraction, radiation damage in solids, reactor chemistry, trace element research in bio-medicine and geo-chemistry. The objectives of the R+D projects ranged from the more basic research to the development of technological processes. Nuclear inspection methodes that have already been developed (e.g. neutron diffraction, trace element analysis) have increasingly been used in an interdisciplinary way. Besides these R+D projects the project of increase of power of the BER II was pursued also in 1981, and further planning documents on the extension of the BER II have been established. The report informs about the most important results of the single sections. A list of the publications (with abstracts) and lectures, also by guest scientists, is attached. (RB) [de

  10. Development of integrated system of spatial coordinates for inputting cartographic information obtained as result of scientific researches at exclusion zone area

    International Nuclear Information System (INIS)

    Mazur, A.B.; Ermolenko, A.I.; Shaptala, D.V.; Postil, S.D.; Yachmenev, V.V.

    1999-01-01

    Integrated system of spatial coordinates was developed for modeling of diverse processes occurring in the exclusion zone. Technology of joint use of CAD and geoinformation system was worked out,which resulted in the 'Ukryttia' object fixing to the topographic base in accordance with geographic coordinates, editing of nomenclative sheets of the area adjacent to the ChNPP and renovation of its relief, as well as conversion of the files made in AutoCad to Arc View format files was performed

  11. Report of scientific results 1977

    International Nuclear Information System (INIS)

    1977-01-01

    The scientific progress report of the HMI for 1977 gives a survey of the main results of HMI research in the fields of neutron scattering, radiation damage in solids, reactor chemistry, trace element research in biomedicine, geochemistry, reactor operation, and radionuclide production. After this, short summaries are given of HMI publications and papers in the above fields. (HK) [de

  12. VINKA, ten years on. Main scientific results

    International Nuclear Information System (INIS)

    1979-01-01

    The VINKA facility in the TRITON swimming-pool reactor at Fontenay-aux-Roses allows the irradiation of solids at low temperatures in order to study crystalline defects. After ten years of operation the main scientific results obtained in the fields of creep and growth (chapter I), point defects (chapter II), amorphisation (chapter III) and dechanneling of particles (chapter IV) are summarised [fr

  13. Overview of galactic results obtained by MAGIC

    Energy Technology Data Exchange (ETDEWEB)

    Zanin, Roberta

    2013-06-15

    MAGIC is a system of two atmospheric Cherenkov telescopes which explores the very-high-energy sky, from some tens of GeV up to tens of TeV. Located in the Canary island of La Palma, MAGIC has the lowest energy threshold among the instruments of its kind, well suited to study the still poorly explored energy band below 100 GeV. Although the space-borne gamma-ray telescope Fermi/LAT is sensitive up to 300 GeV, gamma-ray rates drop fast with increasing energy, so γ-ray collection areas larger than 10{sup 4}m{sup 2}, as those provided by grounds-based instruments, are crucial above a few GeV. The combination of MAGIC and Fermi/LAT observations have provided the first astrophysical spectra sampled in the inverse Compton peak region, resulting in a complete coverage from MeV up to TeV energies, as well as the discovery of a pulsed emission in the very-high-energy band. This paper focuses on the latest results on Galactic sources obtained by MAGIC which are highlighted by the detection of the pulsed gamma-ray emission from the Crab pulsar up to 400 GeV. In addition, we will present the morphological study on the W51 complex which allowed to pinpoint the location of the majority of the emission around the interaction point between the supernova remnant W51C and the star forming region W51B, but also to find a possible contribution from the associated pulsar wind nebula. Other important scientific achievements involve the Crab Nebula with an unprecedented spectrum covering three decades in energy starting from 50 GeV and a morphological study of the unidentified source HESS J1857+026 which supports the pulsar wind nebula scenario. Finally we will report on the searches of very-high-energy signals from gamma-ray binaries, mainly LS I 303+ and HESS J0632+057.

  14. 'Orion-2': first scientific results

    International Nuclear Information System (INIS)

    Gurzadyan, G.A.

    1975-01-01

    The first results of proceeding some data collected by the 'Orion-2' observatory set up in the 'Soyuz-13' are presented. The goal of the experiment is to get the photographs of ultraviolet (UV) spectra of weak stars in the range of 2000-5000 A. Spectrograms are obtained for stars with brightness of 9-9.5 stellar magnitude at 1.5 min exposure. It has been possible to take spectrograms of many stars weaker than the 12-th magnitude at the 18 min exposure and at the short-wave boundary of a spectrum of 2500 A. A group of stars of an unknown type has been observed not far from Capella. The group contains approximately twenty stars weaker than the 10-th photographic magnitude. The average position of the group is α=0.5sup(m)10sup(m), delta=+44deg30'. Spectrograms of more than twenty hot stars in the Sails constellation in the South Sky are obtained. According to the 'Orion-2' data the light absorption in the interstellar space in the range of 2000-3000 A is caused by graphite particles of an almost spheric shape, that is in accordance with present assumptions. In spectra of over 100 stars the doublet of ionized magnesium, 2800 Mg 2, has been distinguished and measured. Spectral photographs made by the 'Orion-2' allow one to reveal chromosphere of cool stars. A strange star is discovered (12sup(m),6 brigthness in photographic rays) not far from Capella, its spectrum displaying many emission lines. A unique spectrogram of the NGC 2 2149 planetary nebula and its nucleus has been obtained. The question is whether it is possible to classify stars not only by their lines but also by the continuous UV spectrum up to 2000 A. This method may turn out to be very effective for weak stars. The 'Orion-2' has demonstrated ample possibilities of carrying out astrophysical researches outside the atmosphere

  15. Results obtained on dileptons and prospects

    International Nuclear Information System (INIS)

    Roche, G.

    1992-01-01

    Experimental results (mostly from the DLS collaboration at LBL) and model calculations of dielectron production in pp/pd/pBe (1-5 GeV) and CaCa (1-2 GeV/A) are presented. Dileptons appear to be a suitable probe to approach in-medium properties of hadrons in nuclear matter. At the present time, the ρ/ω region looks the most promising. Oncoming programs are briefly presented, in particular the HADES project at GSI. 7 figs

  16. Principal scientific and technical results. Scientific report 1994

    International Nuclear Information System (INIS)

    1995-01-01

    On January, 1, 1994, the French Bureau de Recherches Geologiques et Minieres has developed a new organization to carry out its scientific research in applied geosciences. With the exception of cartography and geologic synthesis which are dependent on the Direction of the National Geologic Service, a research management has been created with 90 engineers-searchers and 20 technicians for the execution of the research program. This report comprises two parts. The first part is a summary of the objectives and principal results for each research project of 1994, and the second part is a more detailed presentation of the main results for about a third of the projects. (J.S.). 568 refs., 54 figs., 2 tabs., 3 photos

  17. ERINDA Scientific Results: Transnational Access Activities and Scientific Visits

    CERN Document Server

    Hambsch, Franz-Josef

    2014-01-01

    This paper gives an overview of the Transnational Access Activities and Scientific visits within the FP7 project ERINDA (European Research Infrastructures for Nuclear Data). It highlights the fact that nearly 3200 data - taking hours for external users were made available in the partner installations and 104 man weeks for scientific visits to par tner institutes. This is much more than the 2500 beam hours and 80 weeks promised in the Description of Work of the project.

  18. Planck 2013 results. I. Overview of products and scientific results

    CERN Document Server

    Ade, P.A.R.; Armitage-Caplan, C.; Arnaud, M.; Ashdown, M.; Atrio-Barandela, F.; Aumont, J.; Baccigalupi, C.; Banday, A.J.; Barreiro, R.B.; Bartelmann, M.; Bartlett, J.G.; Battaner, E.; Benabed, K.; Benoit, A.; Benoit-Levy, A.; Bernard, J.P.; Bersanelli, M.; Bielewicz, P.; Bobin, J.; Bock, J.J.; Bonaldi, A.; Bond, J.R.; Borrill, J.; Bouchet, F.R.; Boulanger, F.; Bowyer, J.W.; Bridges, M.; Bucher, M.; Burigana, C.; Butler, R.C.; Cappellini, B.; Cardoso, J.F.; Carr, R.; Casale, M.; Catalano, A.; Challinor, A.; Chamballu, A.; Chary, R.R.; Chen, X.; Chiang, L.Y.; Chiang, H.C.; Christensen, P.R.; Church, S.; Clements, D.L.; Colombi, S.; Colombo, L.P.L.; Couchot, F.; Coulais, A.; Crill, B.P.; Curto, A.; Cuttaia, F.; Danese, L.; Davies, R.D.; Davis, R.J.; de Bernardis, P.; de Rosa, A.; de Zotti, G.; Delabrouille, J.; Delouis, J.M.; Desert, F.X.; Dickinson, C.; Diego, J.M.; Dole, H.; Donzelli, S.; Dore, O.; Douspis, M.; Dunkley, J.; Dupac, X.; Efstathiou, G.; Ensslin, T.A.; Eriksen, H.K.; Falgarone, E.; Finelli, F.; Foley, S.; Forni, O.; Frailis, M.; Franceschi, E.; Freschi, M.; Fromenteau, S.; Gaier, T.C.; Galeotta, S.; Gallegos, J.; Gandolfo, B.; Ganga, K.; Giard, M.; Giardino, G.; Giraud-Heraud, Y.; Gonzalez-Nuevo, J.; Gorski, K.M.; Gratton, S.; Gregorio, A.; Gruppuso, A.; Haissinski, J.; Hansen, F.K.; Hanson, D.; Harrison, D.; Helou, G.; Henrot-Versille, S.; Hernandez-Monteagudo, C.; Herranz, D.; Hildebrandt, S.R.; Hivon, E.; Hobson, M.; Holmes, W.A.; Hornstrup, A.; Hovest, W.; Huffenberger, K.M.; Jaffe, T.R.; Jaffe, A.H.; Jewell, J.; Jones, W.C.; Juvela, M.; Kangaslahti, P.; Keihanen, E.; Keskitalo, R.; Kisner, T.S.; Kneissl, R.; Knoche, J.; Knox, L.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lahteenmaki, A.; Lamarre, J.M.; Lasenby, A.; Laureijs, R.J.; Lawrence, C.R.; Le Jeune, M.; Leach, S.; Leahy, J.P.; Leonardi, R.; Leon-Tavares, J.; Leroy, C.; Lesgourgues, J.; Liguori, M.; Lilje, P.B.; Linden-Vornle, M.; Lopez-Caniego, M.; Lowe, S.; Lubin, P.M.; Macias-Perez, J.F.; Maffei, B.; Maino, D.; Mandolesi, N.; Maris, M.; Marshall, D.J.; Martin, P.G.; Martinez-Gonzalez, E.; Masi, S.; Matarrese, S.; Matthai, F.; Mazzotta, P.; McDonald, A.; McGehee, P.; Meinhold, P.R.; Melchiorri, A.; Melin, J.B.; Mendes, L.; Mennella, A.; Migliaccio, M.; Miniscalco, R.; Mitra, S.; Miville-Deschenes, M.A.; Moneti, A.; Montier, L.; Morgante, G.; Mortlock, D.; Moss, A.; Munshi, D.; Murphy, J.A.; Naselsky, P.; Nati, F.; Natoli, P.; Netterfield, C.B.; Norgaard-Nielsen, H.U.; North, C.; Noviello, F.; Novikov, D.; Novikov, I.; O'Dwyer, I.J.; Osborne, S.; Oxborrow, C.A.; Paci, F.; Pagano, L.; Pajot, F.; Paladini, R.; Paoletti, D.; Partridge, B.; Pasian, F.; Patanchon, G.; Pearson, D.; Pearson, T.J.; Perdereau, O.; Perotto, L.; Perrotta, F.; Piacentini, F.; Piat, M.; Pierpaoli, E.; Pietrobon, D.; Plaszczynski, S.; Platania, P.; Pointecouteau, E.; Polenta, G.; Ponthieu, N.; Popa, L.; Poutanen, T.; Pratt, G.W.; Prezeau, G.; Prunet, S.; Puget, J.L.; Rachen, J.P.; Reach, W.T.; Rebolo, R.; Reinecke, M.; Remazeilles, M.; Renault, C.; Ricciardi, S.; Riller, T.; Ringeval, C.; Ristorcelli, I.; Rocha, G.; Rosset, C.; Rossetti, M.; Roudier, G.; Rowan-Robinson, M.; Rubino-Martin, J.A.; Rusholme, B.; Salerno, E.; Sandri, M.; Santos, D.; Savini, G.; Scott, D.; Seiffert, M.D.; Shellard, E.P.S.; Smoot, G.F.; Spencer, L.D.; Starck, J.L.; Stolyarov, V.; Stompor, R.; Sudiwala, R.; Sunyaev, R.; Sureau, F.; Sutton, D.; Suur-Uski, A.S.; Sygnet, J.F.; Tauber, J.A.; Tavagnacco, D.; Taylor, D.; Terenzi, L.; Texier, D.; Toffolatti, L.; Tomasi, M.; Tristram, M.; Tucci, M.; Tuovinen, J.; Turler, M.; Tuttlebee, M.; Umana, G.; Valenziano, L.; Valiviita, J.; Van Tent, B.; Varis, J.; Vibert, L.; Vielva, P.; Villa, F.; Vittorio, N.; Wade, L.A.; Wandelt, B.D.; Watson, R.; Watson, C.; White, M.; White, S.D.M.; Wilkinson, A.; Yvon, D.; Zacchei, A.; Zonca, A.

    2014-01-01

    The ESA's Planck satellite, dedicated to studying the early universe, was launched on May 2009 and has been surveying the microwave and submillimetre sky since August 2009. In March 2013, ESA and the Planck Collaboration publicly released the initial cosmology products based on the first 15.5 months of Planck operations, along with a set of scientific and technical papers and a web-based explanatory supplement. This paper describes the mission and its performance, and gives an overview of the processing and analysis of the data, the characteristics of the data, the main scientific results, and the science data products and papers in the release. Scientific results include robust support for the standard, six parameter LCDM model of cosmology and improved measurements for the parameters that define this model, including a highly significant deviation from scale invariance of the primordial power spectrum. The Planck values for some of these parameters and others derived from them are significantly different fr...

  19. Planck 2013 results. I. Overview of products and scientific results

    DEFF Research Database (Denmark)

    Planck Collaboration,; Ade, P. A. R.; Aghanim, N.

    2013-01-01

    , and the science data products and papers in the release. Scientific results include robust support for the standard, six parameter LCDM model of cosmology and improved measurements for the parameters that define this model, including a highly significant deviation from scale invariance of the primordial power......The ESA's Planck satellite, dedicated to studying the early universe, was launched on May 2009 and has been surveying the microwave and submillimetre sky since August 2009. In March 2013, ESA and the Planck Collaboration publicly released the initial cosmology products based on the first 15.......5 months of Planck operations, along with a set of scientific and technical papers and a web-based explanatory supplement. This paper describes the mission and its performance, and gives an overview of the processing and analysis of the data, the characteristics of the data, the main scientific results...

  20. Planck 2015 results: I. Overview of products and scientific results

    DEFF Research Database (Denmark)

    Adam, R.; Ade, P. A R; Aghanim, N.

    2016-01-01

    Collaboration released the second set of cosmology products based ondata from the entire Planck mission, including both temperature and polarization, along with a set of scientific and technical papers and a web-based explanatory supplement. This paper gives an overview of the main characteristics of the data...... and the data products in the release, as well as the associated cosmological and astrophysical science results and papers. The data products include maps of the cosmic microwave background (CMB), the thermal Sunyaev-Zeldovich effect, diffuse foregrounds in temperature and polarization, catalogues of compact...... against the Planck data is described, along with a CMB lensing likelihood. Scientific results include cosmological parameters derived from CMB power spectra, gravitational lensing, and cluster counts, as well as constraints on inflation, non-Gaussianity, primordial magnetic fields, dark energy...

  1. Result of some valuable scientific searches

    Directory of Open Access Journals (Sweden)

    Sergiu VLĂDICĂ

    2017-06-01

    Full Text Available Annually, the Editorial Activity division of the Academy of Public Administration edits the proceedings of the scientific-practical conferences with international participation „Theory and Practice of Public Administration”, in a separate volume. This year collection contains 120 articles signed by the researchers of the Academy, of other national higher education institutions and from the similar institutions abroad, of central and local public authorities. The most relevant scientific researches presented in the plenary session of the Conference as well as within six workshops are emphasized in the article.

  2. Swarm Data Processing and First Scientific Results

    DEFF Research Database (Denmark)

    Olsen, Nils

    2014-01-01

    , accelerometer, plasma and electric field measurements. These observations will be distributed by ESA as Level-1b data, which are the calibrated and formatted time series of e.g. the magnetic field measurements taken by each of the three Swarm satellites. The talks presents a first scientific validation of Swarm...... Level-1b data products....

  3. Planck 2015 results. I. Overview of products and scientific results

    CERN Document Server

    Adam, R.; Aghanim, N.; Akrami, Y.; Alves, M.I.R.; Arnaud, M.; Arroja, F.; Aumont, J.; Baccigalupi, C.; Ballardini, M.; Banday, A.J.; Barreiro, R.B.; Bartlett, J.G.; Bartolo, N.; Basak, S.; Battaglia, P.; Battaner, E.; Battye, R.; Benabed, K.; Benoit, A.; Benoit-Levy, A.; Bernard, J.P.; Bersanelli, M.; Bertincourt, B.; Bielewicz, P.; Bonaldi, A.; Bonavera, L.; Bond, J.R.; Borrill, J.; Bouchet, F.R.; Boulanger, F.; Bucher, M.; Burigana, C.; Butler, R.C.; Calabrese, E.; Cardoso, J.F.; Carvalho, P.; Casaponsa, B.; Castex, G.; Catalano, A.; Challinor, A.; Chamballu, A.; Chary, R.R.; Chiang, H.C.; Chluba, J.; Christensen, P.R.; Church, S.; Clemens, M.; Clements, D.L.; Colombi, S.; Colombo, L.P.L.; Combet, C.; Comis, B.; Contreras, D.; Couchot, F.; Coulais, A.; Crill, B.P.; Cruz, M.; Curto, A.; Cuttaia, F.; Danese, L.; Davies, R.D.; Davis, R.J.; de Bernardis, P.; de Rosa, A.; de Zotti, G.; Delabrouille, J.; Delouis, J.M.; Desert, F.X.; Di Valentino, E.; Dickinson, C.; Diego, J.M.; Dolag, K.; Dole, H.; Donzelli, S.; Dore, O.; Douspis, M.; Ducout, A.; Dunkley, J.; Dupac, X.; Efstathiou, G.; Eisenhardt, P.R.M.; Elsner, F.; Ensslin, T.A.; Eriksen, H.K.; Falgarone, E.; Fantaye, Y.; Farhang, M.; Feeney, S.; Fergusson, J.; Fernandez-Cobos, R.; Feroz, F.; Finelli, F.; Florido, E.; Forni, O.; Frailis, M.; Fraisse, A.A.; Franceschet, C.; Franceschi, E.; Frejsel, A.; Frolov, A.; Galeotta, S.; Galli, S.; Ganga, K.; Gauthier, C.; Genova-Santos, R.T.; Gerbino, M.; Ghosh, T.; Giard, M.; Giraud-Heraud, Y.; Giusarma, E.; Gjerlow, E.; Gonzalez-Nuevo, J.; Gorski, K.M.; Grainge, K.J.B.; Gratton, S.; Gregorio, A.; Gruppuso, A.; Gudmundsson, J.E.; Hamann, J.; Handley, W.; Hansen, F.K.; Hanson, D.; Harrison, D.L.; Heavens, A.; Helou, G.; Henrot-Versille, S.; Hernandez-Monteagudo, C.; Herranz, D.; Hildebrandt, S.R.; Hivon, E.; Hobson, M.; Holmes, W.A.; Hornstrup, A.; Hovest, W.; Huang, Z.; Huffenberger, K.M.; Hurier, G.; Ilic, S.; Jaffe, A.H.; Jaffe, T.R.; Jin, T.; Jones, W.C.; Juvela, M.; Karakci, A.; Keihanen, E.; Keskitalo, R.; Kiiveri, K.; Kim, J.; Kisner, T.S.; Kneissl, R.; Knoche, J.; Krachmalnicoff, N.; Kunz, M.; Kurki-Suonio, H.; Lacasa, F.; Lagache, G.; Lahteenmaki, A.; Lamarre, J.M.; Langer, M.; Lasenby, A.; Lattanzi, M.; Lawrence, C.R.; Le Jeune, M.; Leahy, J.P.; Lellouch, E.; Leonardi, R.; Leon-Tavares, J.; Lesgourgues, J.; Levrier, F.; Lewis, A.; Liguori, M.; Lilje, P.B.; Linden-Vornle, M.; Lindholm, V.; Liu, H.; Lopez-Caniego, M.; Lubin, P.M.; Ma, Y.Z.; Macias-Perez, J.F.; Maggio, G.; Mak, D.S.Y.; Mandolesi, N.; Mangilli, A.; Marchini, A.; Marcos-Caballero, A.; Marinucci, D.; Marshall, D.J.; Martin, P.G.; Martinelli, M.; Martinez-Gonzalez, E.; Masi, S.; Matarrese, S.; Mazzotta, P.; McEwen, J.D.; McGehee, P.; Mei, S.; Meinhold, P.R.; Melchiorri, A.; Melin, J.B.; Mendes, L.; Mennella, A.; Migliaccio, M.; Mikkelsen, K.; Mitra, S.; Miville-Deschenes, M.A.; Molinari, D.; Moneti, A.; Montier, L.; Moreno, R.; Morgante, G.; Mortlock, D.; Moss, A.; Mottet, S.; Muenchmeyer, M.; Munshi, D.; Murphy, J.A.; Narimani, A.; Naselsky, P.; Nastasi, A.; Nati, F.; Natoli, P.; Negrello, M.; Netterfield, C.B.; Norgaard-Nielsen, H.U.; Noviello, F.; Novikov, D.; Novikov, I.; Olamaie, M.; Oppermann, N.; Orlando, E.; Oxborrow, C.A.; Paci, F.; Pagano, L.; Pajot, F.; Paladini, R.; Pandolfi, S.; Paoletti, D.; Partridge, B.; Pasian, F.; Patanchon, G.; Pearson, T.J.; Peel, M.; Peiris, H.V.; Pelkonen, V.M.; Perdereau, O.; Perotto, L.; Perrott, Y.C.; Perrotta, F.; Pettorino, V.; Piacentini, F.; Piat, M.; Pierpaoli, E.; Pietrobon, D.; Plaszczynski, S.; Pogosyan, D.; Pointecouteau, E.; Polenta, G.; Popa, L.; Pratt, G.W.; Prezeau, G.; Prunet, S.; Puget, J.L.; Rachen, J.P.; Racine, B.; Reach, W.T.; Rebolo, R.; Reinecke, M.; Remazeilles, M.; Renault, C.; Renzi, A.; Ristorcelli, I.; Rocha, G.; Roman, M.; Romelli, E.; Rosset, C.; Rossetti, M.; Rotti, A.; Roudier, G.; d'Orfeuil, B.Rouille; Rowan-Robinson, M.; Rubino-Martin, J.A.; Ruiz-Granados, B.; Rumsey, C.; Rusholme, B.; Said, N.; Salvatelli, V.; Salvati, L.; Sandri, M.; Sanghera, H.S.; Santos, D.; Saunders, R.D.E.; Sauve, A.; Savelainen, M.; Savini, G.; Schaefer, B.M.; Schammel, M.P.; Scott, D.; Seiffert, M.D.; Serra, P.; Shellard, E.P.S.; Shimwell, T.W.; Shiraishi, M.; Smith, K.; Souradeep, T.; Spencer, L.D.; Spinelli, M.; Stanford, S.A.; Stern, D.; Stolyarov, V.; Stompor, R.; Strong, A.W.; Sudiwala, R.; Sunyaev, R.; Sutter, P.; Sutton, D.; Suur-Uski, A.S.; Sygnet, J.F.; Tauber, J.A.; Tavagnacco, D.; Terenzi, L.; Texier, D.; Toffolatti, L.; Tomasi, M.; Tornikoski, M.; Tristram, M.; Troja, A.; Trombetti, T.; Tucci, M.; Tuovinen, J.; Turler, M.; Umana, G.; Valenziano, L.; Valiviita, J.; Van Tent, B.; Vassallo, T.; Vidal, M.; Viel, M.; Vielva, P.; Villa, F.; Wade, L.A.; Walter, B.; Wandelt, B.D.; Watson, R.; Wehus, I.K.; Welikala, N.; Weller, J.; White, M.; White, S.D.M.; Wilkinson, A.; Yvon, D.; Zacchei, A.; Zibin, J.P.; Zonca, A.

    2016-01-01

    The European Space Agency's Planck satellite, dedicated to studying the early Universe and its subsequent evolution, was launched 14~May 2009 and scanned the microwave and submillimetre sky continuously between 12~August 2009 and 23~October 2013. In February~2015, ESA and the Planck Collaboration released the second set of cosmology products based on data from the entire Planck mission, including both temperature and polarization, along with a set of scientific and technical papers and a web-based explanatory supplement. This paper gives an overview of the main characteristics of the data and the data products in the release, as well as the associated cosmological and astrophysical science results and papers. The science products include maps of the cosmic microwave background (CMB), the thermal Sunyaev-Zeldovich effect, and diffuse foregrounds in temperature and polarization, catalogues of compact Galactic and extragalactic sources (including separate catalogues of Sunyaev-Zeldovich clusters and Galactic col...

  4. New approaches to obtaining scientific innovation in morphological studies of bladder transitional epithelium

    Directory of Open Access Journals (Sweden)

    O Popadynets

    2017-06-01

    Full Text Available Objective: To demonstrate the capabilities of cluster analysis in receiving scientific innovation results in morphological studies of cells of the bladder urothelium. Materials and methods.10 Wistar rats were used. Histological sections were stained with hematoxylin and eosin; electron microscope studies were  conducted; morphometry was performed in ImageJ and statistics – in studio-R using nonparametric methods and multivariate statistics. Results. A brief description of the main stages of cluster analysis shows way to determine the most important features of uroteliocytes and to reveal their heterogeneity, algorithms of Euclidean metrics and methods of clustering were described, the features of the application of the analysis in morphological studies were presented, an example of using these methods in searching for new results was presented, the models of morphological substantiation of clustering results were showed.  Conclusion: 1 cluster analysis provides a scientific novelty in studies of transitional epithelium of the bladder; 2 it is used in case of heterogeneity of cellular composition of urothelium that is detected with a help of coefficient of variation; 3 the most significant features of uroteliocytes are their cell area and their nuclei area; 4 new results on the number of clusters were obtained by method of Ward, and new data on their indicators – by k-means; 5 Euclidean metric is the best to use; 6 to assess the adequacy of the results pairwise comparisons between multiple clusters were carried out according to their indicators; 7 results are presented in dimentional projection and they characterize cellular composition of the urothelium as structural system and detect systemic effects.

  5. Scientific Results of Yoga for Health and Well-Being

    Medline Plus

    Full Text Available ... Z Scientific Results of Yoga for Health and Well-Being Video Share: Video of Scientific Results of Yoga for Health and Well-Being—Full Video Runtime: 16min 37sec The video from ...

  6. Scientific Results of Yoga for Health and Well-Being

    Medline Plus

    Full Text Available ... Scientific Results of Yoga for Health and Well-Being Video Share: Video of Scientific Results of Yoga for Health and Well-Being—Full Video Runtime: 16min 37sec The video from ...

  7. Scientific results of the Viking Project

    International Nuclear Information System (INIS)

    Flinn, E.A.; Reid, G.C.; Csanady, G.

    1977-01-01

    The Viking space project launched two unmanned spacecraft to Mars in 1975 for scientific exploration with special emphasis on the search for life. Each spacecraft consisted of an orbiter and a lander. The landing sites were finally selected after the spacecraft were in orbit. Thirteen investigations were performed: three mapping experiments from the orbiter, one atmospheric investigation during the lander entry phase, eight experiments on the surface of the planet, and one using the spacecraft radio and radar systems. The experiments on the surface dealt principally with biology, chemistry, geology, and meteorology. Seventy-eight scientists participated in the 13 teams performing these experiments. 53 individual articles make up this book

  8. Scientific Results of Yoga for Health and Well-Being

    Medline Plus

    Full Text Available ... Legislation Advisory Council Job Opportunities All About NCCIH Health Topics A-Z # A B C D E ... X Y Z Scientific Results of Yoga for Health and Well-Being Video Share: Video of Scientific ...

  9. Results of SSTC NRS Scientific and Technical Activities for 2014

    International Nuclear Information System (INIS)

    Nosovskij, A.V.; Valyigun, N.P.; Vorobej, I.I.; Kornijevska, O.S.

    2015-01-01

    The paper describes results of SSTC NRS scientific activities for 2014 in basic areas of activities. In particular, it addresses the development of nuclear regulatory control system, reviews, scientific and technical support to the SNRIU oversight function, research ampersand development and analytical efforts as well as scientific information and international activity. First-priority areas for SSTC NRS for the nearest years are identified

  10. Report of the scientific results 1976

    International Nuclear Information System (INIS)

    1976-01-01

    The activities and results in research, development and education are shown in the following fields: 1) HMI-computer-network; 2) Mathematical software and computer graphics; 3) Software development for process control; 4) Real time computer systems - hardware, measurement and control; 5) On-line data processing in medicine; 6) Research on semiconductor devices and irradiation tests. A list of the publication of the staff is given. (WB) [de

  11. Test Beam Results Obtained with the Q4 Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar-Benitez, M.; Alberdi, J.; Cerrada, M.; Colino, N.; Daniel, M.; Fouz, M. c.; Marin, J.; Mocholi, J.; Oller, J. C.; Puerta, J.; Romero, L.; Salicio, J. M.

    2000-07-01

    A prototype of the CMS Barrel Muon Detector incorporating all the features of the final chambers was built at CIEMAT using the mass production assembly procedures and tools. The performance of this prototype was studied in a muon test beam at CERN and the results obtained are presented here. (Author)

  12. Test beam results obtained with the Q4 prototype

    International Nuclear Information System (INIS)

    Aguilar-Benitez, M.; Alberdi, J.; Cerrada, M.; Colino, N.; Daniel, M.; Fouz, M.C.; Marin, J.; Mocholi, J.; Oller, J. C.; Puerta, J.; Romero, L.; Salicio, J. M.; Willmott, C.

    2000-10-01

    A prototype of the CMS Barrel Muon Detector incorporating all the features of the final chambers was built at CIEMAT using the mass production assembly procedures and tools. The performance of this prototype was studied in a muon test beam at CERN and the results obtained are presented here. (Author)

  13. DIFFERENCES IN RESULTS OBTAINED BY STUDENTS OF DIFFERENT FACULTIES

    Directory of Open Access Journals (Sweden)

    OTAVOVÁ, Miroslava

    2016-03-01

    Full Text Available The paper presents and discusses the results of statistical analysis of differences among scores obtained by students of different faculties of the University of Economics in Prague. The analysed dataset contains the scores for 2256 students that took basic mathematics course during the academic year 2013/2014. A two way analysis of variance was performed with semester and faculty as main factors. The interaction between these two factors was also considered. Students have to take two tests. At first, the sum of the scores obtained from both tests is analysed and then, the two tests are analysed separately. It turns out that the significance of factors is the same in the three analyses. The assumptions of linear models are verified. Due to problem of heteroscedasticity, weighted least squares are used and the possibility of using Box-Cox transformation is also discussed, as the errors are not normally distributed. Finally, the differences between the faculties are described.

  14. THE SCIENTIFIC-METHODOLOGICAL STUDY OF A PAPER TO OBTAIN THE FIRST TEACHING DEGREE

    Directory of Open Access Journals (Sweden)

    LEON BUZILĂ

    2014-01-01

    Full Text Available In the first part of the paper, I analyzed the content of the scientific-methodical paper for obtaining the first teaching degree with the title " The Touristic Potential of the Gersa Valley and Its Exploitation" and the presentation of pedagogical research which involved the students. The research described was conducted in the school year 2013-2014 at the "Iacob and Ioachim Mureșanu" Secondary School in Rebrișoara, Bistrița-Năsăud County, Romania. A practical quantitative pedagogical research, with an observation and an experimental phase was organized. The research paradigm was constructivism. The research strategy was action- research.

  15. Results of Scientific and Technical Supervision of Hydraulic Fracturing Operations

    Directory of Open Access Journals (Sweden)

    I.Kh. Makhmutov

    2017-11-01

    Full Text Available The paper presents actual results of the research conducted as part of a field pilot project which consisted in interpretation of minifrac test data and evaluation of the efficiency of the scientific and technical supervision of fracking operations. The research program involved 11 wells targeting Devonian terrigenous reservoirs. Minifrac tests in one perforation interval were performed only in seven wells, that is approximately in 64% of total well count. A reliable fracture closure estimate was obtained only in six wells (55%, beginning of pseudoradial flow was observed only in one well out of 11 wells (9%. Hence, conventional minifrac tests should be supplemented with other diagnostic injection tests. Analysis of the performance of hydraulic fracturing operations conducted according to this pilot project plan indicates that fracture modelling, and scientific and technical supervision of fracking operations performed by Hydrofrac Research Laboratory of Institute TatNIPIneft Tatneft PJSC have yielded beneficial effects, namely 1.44 times increase in oil production rates.

  16. Lambing results obtained with imported Ile de France rarn semen

    African Journals Online (AJOL)

    insemination was carried out either 54,5 h (fixed time single ... Table 1 Conception rate obtained using two batches of frozen lle de France ... Pregnant mare serum gonadotrophin (Fostim, 300 ... Effect of initial freezing temperature, addition.

  17. Visual Display of Scientific Studies, Methods, and Results

    Science.gov (United States)

    Saltus, R. W.; Fedi, M.

    2015-12-01

    The need for efficient and effective communication of scientific ideas becomes more urgent each year.A growing number of societal and economic issues are tied to matters of science - e.g., climate change, natural resource availability, and public health. Societal and political debate should be grounded in a general understanding of scientific work in relevant fields. It is difficult for many participants in these debates to access science directly because the formal method for scientific documentation and dissemination is the journal paper, generally written for a highly technical and specialized audience. Journal papers are very effective and important for documentation of scientific results and are essential to the requirements of science to produce citable and repeatable results. However, journal papers are not effective at providing a quick and intuitive summary useful for public debate. Just as quantitative data are generally best viewed in graphic form, we propose that scientific studies also can benefit from visual summary and display. We explore the use of existing methods for diagramming logical connections and dependencies, such as Venn diagrams, mind maps, flow charts, etc., for rapidly and intuitively communicating the methods and results of scientific studies. We also discuss a method, specifically tailored to summarizing scientific papers that we introduced last year at AGU. Our method diagrams the relative importance and connections between data, methods/models, results/ideas, and implications/importance using a single-page format with connected elements in these four categories. Within each category (e.g., data) the spatial location of individual elements (e.g., seismic, topographic, gravity) indicates relative novelty (e.g., are these new data?) and importance (e.g., how critical are these data to the results of the paper?). The goal is to find ways to rapidly and intuitively share both the results and the process of science, both for communication

  18. Some Preliminary Scientific Results of Chang'E-3 Mission

    Science.gov (United States)

    Zou, Y.; Li, W.; Zheng, Y.; Li, H.

    2015-12-01

    Chang'E-3 mission is the main task of Phase two of China Lunar Exploration Program (CLEP), and also is Chinese first probe of landing, working and roving on the moon. Chang'E-3 craft composed of a lander and a rover, and each of them carry four scientific payloads respectively. The landing site of Chang'E-3 was located at 44.12 degrees north latitude and 19.51 degrees west longitude, where is in the northern part of Imbrium Which the distance in its west direction from the landing site of former Soviet probe Luna-17 is about 400 km, and about 780km far from the landing site of Appolo-17 in its southeast direction. Unfortunately, after a series of scientific tests and exploration on the surface of the moon, the motor controller communication of the rover emerged a breakdown on January 16, 2014, which leaded the four payloads onboard the rover can't obtain data anymore. However, we have received some interesting scientific data which have been studied by Chinese scientists. During the landing process of Chang'E-3, the Landing camera got total 4673 images with the Resolution in millimeters to meters, and the lander and rover took pictures for each other at different point with Topography camera and Panoramic camera. We can find characteristic changes in celestial brightness with time by analyzing image data from Lunar-based Ultraviolet Telescope (LUT) and an unprecedented constraint on water content in the sunlit lunar exosphere seen by LUT). The figure observed by EUV camera (EUVC) shows that there is a transient weak area of the Earth's plasma sphere; This event took place about three hours. The scientists think that it might be related to the change of the particle density of mid-latitude ionosphere. The preliminary spectral and mineralogical results from the landing site are derived according to the data of Visible and Near-infrared Imaging Spectrometer (VNIS). Seven major elements including Mg, Al, Si, K, Ca, Ti and Fe have been identified by the Active Particle

  19. Salton Sea Scientific Drilling Project: A summary of drilling and engineering activities and scientific results

    Energy Technology Data Exchange (ETDEWEB)

    Ross, H.P.; Forsgren, C.K. (eds.)

    1992-04-01

    The Salton Sea Scientific g Project (SSSDP) completed the first major well in the United States Continental Scientific Drilling Program. The well (State 2-14) was drilled to 10,W ft (3,220 m) in the Salton Sea Geothermal Field in California's Imperial Valley, to permit scientific study of a deep, high-temperature portion of an active geothermal system. The program was designed to investigate, through drilling and testing, the subsurface thermal, chemical, and mineralogical environments of this geothermal area. Extensive samples and data, including cores, cuttings, geothermal fluids and gases, and geophysical logs, were collected for future scientific analysis, interpretation, and publication. Short duration flow tests were conducted on reservoirs at a depth of approximately 6,120 ft (1,865 m) and at 10,136 ft (3,089 m). This report summarizes all major activities of the SSSDP, from project inception in the fall of 1984 through brine-pond cleanup and site restoration, ending in February 1989. This report presents a balanced summary of drilling, coring, logging, and flow-test operations, and a brief summary of technical and scientific results. Frequent reference is made to original records, data, and publication of results. The report also reviews the proposed versus the final well design, and operational summaries, such as the bit record, the casing and cementing program, and the coring program. Summaries are and the results of three flow tests. Several teamed during the project.

  20. Preliminary results obtained from a dense plasma focus

    International Nuclear Information System (INIS)

    Sinman, S.; Sinman, A.

    1982-01-01

    In this study, for the data processing in our Dense Plasma Focus (DPF) system, a multiparameters numerical hierarchy obtained from the fundamental equations based on the snowplows model and its conclusions have been developed. Evaluating the data along the transients of the total plasma current, the anode current and the focus voltage recorded by an oscilloscope, they have been possible to determine the time domain plasma parameters such as the shock thickness, the sheath temperature, velocity and electron density, the pressure at the focus phase and the plasma temperature. Besides, the dissipated energy through the focus notch or in other words, the plasma temperature has also been calculated by means of the numerical integration. In the text, a performance chart together with some other correlation curves for the optimization of the DPF systems are submitted and discussed. (author)

  1. Results Obtained in Training Romanian Sport Horses for Jumping Competitions

    Directory of Open Access Journals (Sweden)

    Flavia Luminiţa Bochiş

    2012-10-01

    Full Text Available A number of 29 equines, Romanian Sport Horse stallions, were taken as green horses, break into the saddle, andteach into basic training while later train as jumpers over three years. The obstacle courses results had been obtainedin our country, in Hungary and in Serbia. There were courses jumped in the national championship, somedemonstrations organized in Romania or in the two foreign countries, or periodically test pattern courses run on theown arena. The best results, respectively more than 50% obstacle courses with no fault points over 3 years, were runby five stallions, and the same percent for 2 seasons, was reached by nine stallions.

  2. Scientific report of results No. 4/1975

    International Nuclear Information System (INIS)

    1975-01-01

    In this report, the HMI Berlin for nuclear research describes the results of work done in the data processing and electronics section, the general scientific-technical facilities of this section, as well as cooperative work, publications and lectures together with the names of the participants. (HK) [de

  3. Paternity tests in Mexico: Results obtained in 3005 cases.

    Science.gov (United States)

    García-Aceves, M E; Romero Rentería, O; Díaz-Navarro, X X; Rangel-Villalobos, H

    2018-04-01

    National and international reports regarding the paternity testing activity scarcely include information from Mexico and other Latin American countries. Therefore, we report different results from the analysis of 3005 paternity cases analyzed during a period of five years in a Mexican paternity testing laboratory. Motherless tests were the most frequent (77.27%), followed by trio cases (20.70%); the remaining 2.04% included different cases of kinship reconstruction. The paternity exclusion rate was 29.58%, higher but into the range reported by the American Association of Blood Banks (average 24.12%). We detected 65 mutations, most of them involving one-step (93.8% and the remaining were two-step mutations (6.2%) thus, we were able to estimate the paternal mutation rate for 17 different STR loci: 0.0018 (95% CI 0.0005-0.0047). Five triallelic patterns and 12 suspected null alleles were detected during this period; however, re-amplification of these samples with a different Human Identification (HID) kit confirmed the homozygous genotypes, which suggests that most of these exclusions actually are one-step mutations. HID kits with ≥20 STRs detected more exclusions, diminishing the rate of inconclusive results with isolated exclusions (Powerplex 21 kit (20 STRs) and Powerplex Fusion kit (22 STRs) offered similar PI (p = 0.379) and average number of exclusions (PE) (p = 0.339) when a daughter was involved in motherless tests. In brief, besides to report forensic parameters from paternity tests in Mexico, results describe improvements to solve motherless paternity tests using HID kits with ≥20 STRs instead of one including 15 STRs. Copyright © 2018 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

  4. Results obtained by Trillo Nuclear Power Plant in 2001

    International Nuclear Information System (INIS)

    Solar, V.

    2002-01-01

    Unification of the Almaraz and Trillo plant managements was given a strong boost with unification of the central offices and management computer platforms (economic and technical) and with signature of an agreement with Madrid's trade unions providing for appropriate management of surpluses and the transfer of knowledge between people leaving the company and those taking their place. The operating results have been maintained at a high level although they were lower than last year, which was exceptional. The plant was on line for 7,979 hours, most of them at full load. (Author)

  5. Measurement results obtained from air quality monitoring system

    Energy Technology Data Exchange (ETDEWEB)

    Turzanski, P.K.; Beres, R. [Provincial Inspection of Environmental Protection, Cracow (Poland)

    1995-12-31

    An automatic system of air pollution monitoring operates in Cracow since 1991. The organization, assembling and start-up of the network is a result of joint efforts of the US Environmental Protection Agency and the Cracow environmental protection service. At present the automatic monitoring network is operated by the Provincial Inspection of Environmental Protection. There are in total seven stationary stations situated in Cracow to measure air pollution. These stations are supported continuously by one semi-mobile (transportable) station. It allows to modify periodically the area under investigation and therefore the 3-dimensional picture of creation and distribution of air pollutants within Cracow area could be more intelligible.

  6. The similia principle: results obtained in a cellular model system.

    Science.gov (United States)

    Wiegant, Fred; Van Wijk, Roeland

    2010-01-01

    This paper describes the results of a research program focused on the beneficial effect of low dose stress conditions that were applied according to the similia principle to cells previously disturbed by more severe stress conditions. In first instance, we discuss criteria for research on the similia principle at the cellular level. Then, the homologous ('isopathic') approach is reviewed, in which the initial (high dose) stress used to disturb cellular physiology and the subsequent (low dose) stress are identical. Beneficial effects of low dose stress are described in terms of increased cellular survival capacity and at the molecular level as an increase in the synthesis of heat shock proteins (hsps). Both phenomena reflect a stimulation of the endogenous cellular self-recovery capacity. Low dose stress conditions applied in a homologous approach stimulate the synthesis of hsps and enhance survival in comparison with stressed cells that were incubated in the absence of low dose stress conditions. Thirdly, the specificity of the low dose stress condition is described where the initial (high dose) stress is different in nature from the subsequently applied (low dose) stress; the heterologous or 'heteropathic' approach. The results support the similia principle at the cellular level and add to understanding of how low dose stress conditions influence the regulatory processes underlying self-recovery. In addition, the phenomenon of 'symptom aggravation' which is also observed at the cellular level, is discussed in the context of self-recovery. Finally, the difference in efficiency between the homologous and the heterologous approach is discussed; a perspective is indicated for further research; and the relationship between studies on the similia principle and the recently introduced concept of 'postconditioning hormesis' is emphasized. Copyright 2009 The Faculty of Homeopathy. Published by Elsevier Ltd. All rights reserved.

  7. Results obtained using the pellet charge exchange diagnostic on TFTR

    International Nuclear Information System (INIS)

    McChesney, J.M.; Fisher, R.K.; Parks, P.B.; Duong, H.H.; Mansfield, D.K.; Medley, S.S.; Roquemore, A.L.; Petrov, M.P.

    1994-05-01

    Experiments are underway on TFTR to measure the confined alpha particle distribution functions using small low-Z pellets injected into the plasma. Upon entering the plasma, the pellet ablates, forming a plasma ablation cloud, elongated in the magnetic field direction, that travels alongside the pellet. A small fraction of the fusion produced 3.5 MeV alpha particles incident on the cloud are converted to helium neutrals. By measuring the resultant helium neutrals escaping from the plasma by means of a mass and energy resolving charge exchange analyzer, the energy distribution of the alpha particles incident on the cloud can be inferred. Preliminary experiments to observe neutrals from the 100-1000 keV He tail produced during ICRF minority heating experiments were successful. However, no significant alpha particle signals have been observed during D-T operation on TFTR. The authors attribute this lack of signal to stochastic toroidal field ripple loss in the outer regions of the plasma. They are studying ways to improve the pellet penetration so that the pellet penetrates into the central regions of the plasma where ripple induced losses are small and the alpha population is high

  8. The ESA Scientific Exploitation of Operational Missions element, first results

    Science.gov (United States)

    Desnos, Yves-Louis; Regner, Peter; Delwart, Steven; Benveniste, Jerome; Engdahl, Marcus; Mathieu, Pierre-Philippe; Gascon, Ferran; Donlon, Craig; Davidson, Malcolm; Pinnock, Simon; Foumelis, Michael; Ramoino, Fabrizio

    2016-04-01

    SEOM is a program element within the fourth period (2013-2017) of ESA's Earth Observation Envelope Programme (http://seom.esa.int/). The prime objective is to federate, support and expand the international research community that the ERS, ENVISAT and the Envelope programmes have built up over the last 25 years. It aims to further strengthen the leadership of the European Earth Observation research community by enabling them to extensively exploit future European operational EO missions. SEOM will enable the science community to address new scientific research that are opened by free and open access to data from operational EO missions. Based on community-wide recommendations for actions on key research issues, gathered through a series of international thematic workshops and scientific user consultation meetings, a work plan is established and is approved every year by ESA Members States. During 2015 SEOM, Science users consultation workshops have been organized for Sentinel1/3/5P ( Fringe, S3 Symposium and Atmospheric science respectively) , new R&D studies for scientific exploitation of the Sentinels have been launched ( S3 for Science SAR Altimetry and Ocean Color , S2 for Science,) , open-source multi-mission scientific toolboxes have been launched (in particular the SNAP/S1-2-3 Toolbox). In addition two advanced international training courses have been organized in Europe to exploit the new S1-A and S2-A data for Land and Ocean remote sensing (over 120 participants from 25 countries) as well as activities for promoting the first scientific results ( e.g. Chili Earthquake) . In addition the First EO Open Science 2.0 was organised at ESA in October 2015 with 225 participants from 31 countries bringing together young EO scientists and data scientists. During the conference precursor activities in EO Open Science and Innovation were presented, while developing a Roadmap preparing for future ESA scientific exploitation activities. Within the conference, the first

  9. Integrating scientific results for a post-closure safety demonstration

    International Nuclear Information System (INIS)

    Taylor, E.C.; Ramspott, L.D.; Sinnock, S.; Sprecher, W.M.

    1994-01-01

    The U.S. Department of Energy (DOE) is developing a nuclear waste management system that will accept high-level radioactive waste, transport it, store it, and ultimately emplace it in a deep geologic repository. The key activity now is determining whether Yucca Mountain, Nevada is suitable as a site for the repository. If so, the crucial technological advance will be the demonstration that disposal of nuclear waste will be safe for thousands of years after closure. Recent regulatory, legal, and scientific developments imply that the safety demonstration must be simple. The scientific developments taken together support a simple set of hypotheses that constitute a post-closure safety argument for a repository at Yucca Mountain. If the understanding of Yucca Mountain hydrology presented in the Site Characterization Plan proves correct, then these hypotheses might be confirmed by combining results of Surface-Based Testing with early testing results in the Exploratory Studies Facility

  10. Plan to increase public access to the results of Federally-funded scientific research results.

    Science.gov (United States)

    2015-12-16

    This plan is issued in response to the February 22, 2013 Office of Science and Technology Policy (OSTP) Memorandum for the Heads of Executive Departments and Agencies entitled Increasing Access to the Results of Federally Funded Scientific Researc...

  11. Scientific decision of the Chernobyl accident problems (results of 1997)

    International Nuclear Information System (INIS)

    Konoplya, E.F.; Rolevich, I.V.

    1998-12-01

    In the publication are summarized the basic results of the researches executed in 1997 in the framework of the 'Scientific maintenance of the decision of problems of the Chernobyl NPP accident consequences' of the State program of Republic of Belarus for minimization and overcoming of the Chernobyl NPP accident consequences on 1996-2000 on the following directions: dose monitoring of the population, estimation and forecast of both collective irradiation dozes and risks of radiation induced diseases; development and ground of the measures for increase of radiation protection of the population of Belarus during of the reducing period after the Chernobyl accident; study of influence of radiological consequences of the Chernobyl accident on health of people, development of methods and means of diagnostics, treatment and preventive maintenance of diseases for various categories of the victims; optimisation of the system of measures for preservation of health of the victim population and development of ways for increase of it effectiveness; creation of the effective both prophylactic means and food additives for treatment and rehabilitation of the persons having suffered after the Chernobyl accident; development of complex system of an estimation and decision-making on problems of radiation protection of the population living on contaminated territories; development and optimization of a complex of measures for effective land use and decrease of radioactive contamination of agricultural production in order to reduce irradiation dozes of the population; development of complex technologies and means of decontamination, treatment and burial of radioactive wastes; study of the radioisotopes behaviour dynamics in environment (air, water, ground), ecosystems and populated areas; optimization of the system of radiation ecological monitoring in the republic and scientific methodical ways of it fulfilling; study of effects of low doze irradiation and combined influences, search

  12. Strength in power sports: the latest scientific results

    Directory of Open Access Journals (Sweden)

    MÁRIO C. MARQUES

    2011-06-01

    Full Text Available Problem Statement: During the last decades, strength and power training has been a major issue for, coaches,athletes and researchers. Unfortunately, despite the increasing professionalization of coaches and athletes, thereis little research data concerning performance in elite athletes. Several studies showed that a specific strengthtraining program can improve athletes’ maximal force and power production, reduce the incidence of injury, andcontribute to faster injury recovery times, thereby minimizing the number of missed practice sessions andcompetitions. To our best knowledge, however, there is no apparent consensus on the appropriate method ofstrength and muscular power training to enhance performance, especially in typically power sports. On this,some questions remain unresolved and there have focused objective of our study: How much strength does anathlete need? Is the maximum strength the key for success? Is the muscular power the main issue?Approach: Therefore, the aim of this study focuses on a literature scientific search extended about strength inpower sports specifically.Results: Studies in this area continue to contradict because they differ markedly in terms of design factors,including mode, frequency, intensity, frequency of training, and training history of subjects.Conclusions/Recommendations: We can conclude that once a given level of strength training intensity hasbeen reached in trained athletes, the appropriate physiological adaptations may well be optimized and thattraining beyond this limit provides no further benefits

  13. SCIENTOMETRY AND EVALUATION OF THE RESULTS OF ECONOMIC SCIENTIFIC RESEARCH

    Directory of Open Access Journals (Sweden)

    Ana-Lucia RISTEA

    2017-04-01

    Full Text Available Starting from the necessity of a continuous and demanding evaluation, capable of linking the results obtained with the human, material and financial resources, allocated and periodically setting the position of the national research relative to the world level, the evaluation of the relevance of the publications must be carried out from the positions and requirements of new disciplines: Scientometry. Scientometry is intended to help substantiate the evaluation of research activity and decision-making on its development, the science policy as a whole.

  14. Physics-Based Scientific Learning Module to Improve Students Motivation and Results

    Directory of Open Access Journals (Sweden)

    Soni Nugroho Yuliono

    2018-02-01

    Full Text Available Teaching materials that available in the school to learn physics especially scientific-based is limited and become one of the obstacles to achieving the learning objectives on electromagnetic waves maerial. The research aims is to gain scientific Physics-based learning modules for high school grade XII students who have met the eligibility criteria, determine the effectiveness of using scientific-based learning modules Physics to improve motivation and learning outcomes from students of grade XII High School. The development of this research on Physics module using 4D development procedure which consist of the steps of define, design, development, and dissemination. Definition phase consists of the teacher and student’s needs analysis process, material analysis, as well as the formulation of the learning module. The design phase of physics learning modules according to the stage of scientific learning are integrated into the module. The development phase consists of the development process of the modules from the design results, validating the feasibility, module revision, limited testing, and the use of scientifically-based learning modules Physics in grade XII IPA 1 Batik 2 Surakarta senior high school. The deployment phase is the deployment process module to another Senior High School in Surakarta. Data Analysis for the study is quantitative descriptive analysis based on the score criteria and analysis of increasing student motivation through N-gain. Conclusion obtained are ; 1 Physics-based scientific learning modules that developed meet the eligibility criteria on aspects of content and presentation, language, the chart, and aspects of learning. The module is declared worthy of the ideals validation results with the percentage of 85.16%, 83.66% by students and teachers in the response phase of the deployment of 85.93%, which is included in the category of "very good"; 2 Physics-based scietific learning modules with material scientific

  15. Deutsches Krebsforschungszentrum Heidelberg. Report on scientific results 2000-2001

    International Nuclear Information System (INIS)

    Metzler, H.

    2002-01-01

    The Deutsches Krebsforschungszentrum Heidelberg (DKFZ, German Cancer Research Center) publishes alternating every year the ''Wissenschaftlicher Ergebnisbericht'' (in German) and the ''Research Report'' (in English). Both volumes are reports on the present state of research activities of the DKFZ as a National Research Center to the funding federal and state authorities [Federal Republic of Germany, Land (state) Baden-Wuerttemberg]. Furthermore they shall inform colleagues and the scientifically interested public. Both reports are structured according to the center's eight research programs. The last Research Report was published in 2001. In Germany a new orthography has been accepted. Some authors used the new form others the traditional one. The orthography was not standardized. (orig.)

  16. 'Ukrytie' entombment is 10 years old. Main results of scientific investigations

    International Nuclear Information System (INIS)

    1996-01-01

    The Collection is dedicated to 10-yaer anniversary of the ''Ukrytie''. It comprises articles written by specialists of the National Academy of Sciences of Ukraine, the Interdisciplinary Scientific and Technical Centre ''Shelter'', the ''Ukrytie'', Russian Scientific Centre ''Kurchatov Institute'' (Moscow), Khlopin Radium Institute (Saint-Petersburg), Radioecological Problems Institute (Minsk), who took part in study of this unique object for many years. The articles are written in review form and include all main scientific results obtained owing to common efforts during last 10 years. Of course, these years were not equal as to the research results. There were years of great breaks-through towards new knowledge about the ''Ukrytie'', as well as years of preparation for these breaks-through. Nevertheless, scientific research of the ''Ukrytie'' never stopped and every year of work brought grains of objective truth on base of which our present knowledge about the ''Ukrytie'' was put together. This knowledge, set out in easily understood form, delivers materials of the Collection to the reader concerned

  17. Ethics in scientific results application: Gene and life forms patenting

    Directory of Open Access Journals (Sweden)

    Konstantinov Kosana

    2010-01-01

    Full Text Available The remarkable development and application of new genetic technologies over the past decades has been accompanied by profound changes in the way in which research is commercialized in the life sciences. As results, new varieties of commercially grown crops with improved or new traits are developed. Many thousands of patents which assert rights over DNA sequences have been granted to researchers across the public and private sector. The effects of many of these patents are extensive, because inventors who assert rights over DNA sequences obtain protection on all uses of the sequences. Extremely valuable to breeders in the national agricultural research system is the ability to genotype their collections to get a clear picture of their diversity and how diversity could be enhanced through sharing and access to global collections. The issue of the eligibility for patenting of DNA sequences needs to be reopened. Patents that assert rights over DNA sequences and their uses are, in some cases, supportable, but in others, should be treated with great caution. Rights over DNA sequences as research tools should be discouraged. That the best way to discourage the award of such patents is by stringent application of the criteria for patenting, particularly utility. A more equitable, ethically - based food and agricultural system must incorporate concern for three accepted global goals: improved well being, protection of the environment and improved public health (particular point food from GMO. To mitigate conflict one of the approach to solve problem is ethical and truthful label of GM food, because consumers have a right to choose whether to eat genetically modified foods or not. Interesting examples and risks as consequences of free availability of genetic resources utilization, its transformation, patenting of 'new' organism and selling it back to the genetic resource owner are presented. Society has obligations to raise levels of nutrition and

  18. Progress and scientific results in the TCV tokamak

    International Nuclear Information System (INIS)

    Coda, S.

    2011-01-01

    The TCV tokamak has the dual mission of supporting ITER and exploring alternative paths to a fusion reactor. Its most unique tools are a 4.5 MW electron cyclotron resonance heating system with seven real-time controllable launchers and a plasma control system with 16 independent shaping coils. Recent upgrades in temperature, density and rotation diagnostics are being followed by new turbulence and suprathermal electron diagnostics, and a new digital real-time network has been commissioned. The shape control flexibility of TCV has enabled the generation and control of the first 'snowflake' divertor, characterized by a null point in which both the poloidal field and its gradient vanish. The predicted increases in flux expansion and edge magnetic shear have been verified experimentally, and stable EC-heated snowflake ELMy H-modes have been obtained and characterized. ECCD modulation techniques have been used to study the role of the current profile in energy transport, and simulations reproduce the results robustly. The relation between impurity and electron density gradients in L-mode is explained in terms of neoclassical and turbulent drives. Studies of torqueless plasma rotation have continued, highlighting the important role of MHD and sawtooth relaxations in determining the rotation profiles. A newly predicted mechanism for turbulent momentum transport associated with up-down plasma asymmetry has been verified in TCV. Sawtooth period control, neoclassical tearing mode control and soft x-ray emission profile control have been demonstrated in TCV using the new digital control hardware, as a step on the way to more complex applications.

  19. Scientific Results of Yoga for Health and Well-Being

    Medline Plus

    Full Text Available ... For Health Care Professionals Clinical Practice Guidelines Literature Reviews All Health Information Research Research Results Results by ... Awards & Opportunities Institutional Training Sites Training Grant Application, Review, and Award Process More Training Resources CME/CEU ...

  20. Scientific Results of Yoga for Health and Well-Being

    Medline Plus

    Full Text Available ... Clinical Practice Guidelines Literature Reviews All Health Information Research Research Results Results by Date Sponsored by NCCIH Division of Extramural Research Conducted at NCCIH Labs at NCCIH—Division of ...

  1. Scientific Results of Yoga for Health and Well-Being

    Medline Plus

    Full Text Available ... Science For Health Care Professionals Clinical Practice Guidelines Literature Reviews All Health Information Research Research Results Results ... Follow NCCIH: Read our disclaimer about external links Twitter Read our disclaimer about external links Facebook Read ...

  2. Scientific Results of Yoga for Health and Well-Being

    Medline Plus

    Full Text Available ... What Is Complementary, Alternative or Integrative Health? Safety Information Know the Science For Health Care Professionals Clinical Practice Guidelines Literature Reviews All Health Information Research Research Results Results by Date Sponsored by ...

  3. Scientific Results of Yoga for Health and Well-Being

    Medline Plus

    Full Text Available ... Science For Health Care Professionals Clinical Practice Guidelines Literature Reviews All Health Information Research Research Results Results ... Resources CME/CEU and Online Lectures Online Continuing Education Series Distinguished Lecture Series Integrated Medicine Research Lecture ...

  4. Report of scientific results 1976. Section nuclear chemistry and reactor

    International Nuclear Information System (INIS)

    1976-01-01

    The report of the section Nuclear Chemistry and Reactor presents the results of R and D in the fields of neutron scattering, radiation damage in solids, reactor chemistry, trace elements research in biomedicine, geochemistry, reactor operation, radioisotope production, and gives a survey of publications and lectures. (HK) [de

  5. COST 296 scientific results designed for operational use

    Directory of Open Access Journals (Sweden)

    Michael Pezzopane

    2009-06-01

    style="margin: 0.0px 0.0px 0.0px 0.0px; font: 9.0px Times;">Existing national capabilities are taken into account to develop synergies and avoid duplication. The enhancement

    of environment monitoring networks and associated instrumentation yields mutual advantages for European

    and regional services specialized for local user needs.

    It structurally increases the integration of limited-area services, and generates a platform employing the same

    approach to each task differing mostly in input and output data. In doing so it also provides a complementary

    description of the environmental state within issued information, as well as providing a platform for interaction

    among local end users, who define what kind of information they need, for system providers, who finalize the

    tools necessary to obtain required information, and for local service providers, who do the actual processing of

    data, tailoring it to specific users’ needs. Such an initiative creates a unique opportunity for small national services

    to consolidate their product design so that is no longer limited to their own activity, but can serve the wider

    European services.

    The development and improvement of techniques for mitigating ionospheric effects on radio systems by the

  6. Self-propelled prospection methodology: first results obtained in the northeast basin (Uruguay)

    International Nuclear Information System (INIS)

    Goso, H; Spoturno, J; Peciozzi, F.

    2008-01-01

    This report refers about uranium prospection methodology in Uruguay and its first results obtained in the northeast basin.The preliminary radiometric researching is carried out four works phases: material preparation, radiometric, statistics analysis, anomalies revision

  7. CIEMAT interlaboratories comparison of the results obtained in the proficiency test run by IAEA

    International Nuclear Information System (INIS)

    Gasco, C.; Anton, M. P.; Alvarez, A.; Navarro, N.; Meral, J.; Gonzalez, A.; Higueras Lafaja, E.

    2000-01-01

    This report contains the results obtained by two different laboratories from CIEMAT after participating in the Proficiency Test organised by IAEA (International Atomic Energy Agency) in 1999. This test involves the analysis of fly ashes containing natural radionuclides and different amounts of added transuranics. The extraction techniques, counting methods and results obtained are detailed. This type of test are used for the labs to achieve their accreditation and check the reliability of the procedures routinely employed. (Author) 4 refs

  8. Analysis of the results obtained by optical measurements in plasma focus equipments

    International Nuclear Information System (INIS)

    Bilbao, L.; Bruzzone, H.

    1982-01-01

    The results obtained by shadow and Schlieren photographies and interferometry in a 1MJ plasma focus device of Frascati (CNEN-EURATOM, Italy) are compared with a great number of similar measurement results in several devices of the world. A critical analysis of the above results is presented. (L.C.) [pt

  9. Comparison of the results of radiation transport calculation obtained by means of different programs

    International Nuclear Information System (INIS)

    Gorbatkov, D.V.; Kruchkov, V.P.

    1995-01-01

    Verification of calculational results of radiation transport, obtained by the known, programs and constant libraries (MCNP+ENDF/B, ANISN+HILO, FLUKA92) by means of their comparison with the precision results calculations through ROZ-6N+Sadko program constant complex and with experimental data, is carried out. Satisfactory agreement is shown with the MCNP+ENDF/B package data for the energy range of E<14 MeV. Analysis of the results derivations, obtained trough the ANISN-HILO package for E<400 MeV and the FLUKA92 programs of E<200 GeV is carried out. 25 refs., 12 figs., 3 tabs

  10. Scientific citations favor positive results : a systematic review and meta-analysis

    NARCIS (Netherlands)

    Duyx, Bram; Urlings, Miriam J.E.; Swaen, Gerard M.H.; Bouter, Lex M.; Zeegers, Maurice P.

    2017-01-01

    Objectives Citation bias concerns the selective citation of scientific articles based on their results. We brought together all available evidence on citation bias across scientific disciplines and quantified its impact. Study Design and Setting An extensive search strategy was applied to the Web of

  11. An overview of results obtained in intercomparison exercises for determination of actinides

    International Nuclear Information System (INIS)

    Benedik, L.

    2013-01-01

    In recent years the Jožef Stefan Institute participated in numerous intercomparison exercises for determination of natural and man-made radionuclides. The reported values were mostly in good agreement with the resulting reference values. This paper describes an analysis of the measurement results obtained in intercomparison exercises for determination of actinides in the period from 2009 to 2011, organised by the National Physical Laboratory and the Bundesamt für Strahlenschutz. The review covers neptunium, plutonium and americium radioisotopes over this period. - Highlights: • The goal of this study is an overview of results obtained in intercomparison exercises for determination of actinides. • The disagreement of results for Np-237 was evaluated. • Improvements in separation procedures were done

  12. Near-Infrared Scintillation of Liquid Argon: Recent Results Obtained with the NIR Facility at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Escobar, C. O. [Fermilab; Rubinov, P. [Fermilab; Tilly, E. [Sewanee U.

    2018-03-19

    After a short review of previous attempts to observe and measure the near-infrared scintillation in liquid argon, we present new results obtained with NIR, a dedicated cryostat at the Fermilab Proton Assembly Building (PAB). The new results give confidence that the near-infrared light can be used as the much needed light signal in large liquid argon time projection chambers.11 pages,

  13. The meaning of ice: scientific scrutiny and the visual record obtained from the British polar expeditions between 1772 and 1854

    OpenAIRE

    Ware, Trevor David Oliver

    2014-01-01

    This thesis is an analysis of the work produced by artists accompanying naval expeditions to the Arctic and Antarctic regions between 1772 and 1854. The expeditions were mainly by sea and supplemented in the Arctic by some overland. Their aims were scientific and organised chiefly, but not exclusively, in conjunction with the Royal Society of London. Various British Governments sought strategic advantages along with international recognition for finding both a Southern Continent and a North W...

  14. Using the Viking biology experimental results to obtain chemical information about Martian regolith

    Science.gov (United States)

    Plumb, Robert C.

    1992-01-01

    Although initially formulated as biology experiments, most of the results produced by the Viking Labeled Release (LR), Gas Exchange (GEX), and Pyrolytic Release (PR) experiments have been reproduced by chemical means. The experiments do not need more study as 'biological' phenomena, but they do deserve much more careful consideration from a chemical viewpoint. They are the only 'wet-chemical' experiments that scientists have performed on another planet, but they have not found very general use as sources of scientific information. There is a large set of potentially useful chemical observations, e.g., the three resolvable and precisely measured kinetic components of the release of C-14-labeled gases, the thermal sensitivity and magnitudes of the oxidation reaction(s) of the LR experiments, the kinetics and magnitude of the O2 and CO2 release of the GEX experiments, the thermal sensitivity of the GEX results, the differences between the thermal sensitivity of the GEX and the thermal sensitivity of the LR responses, and the kinetics and magnitudes of the LR successive injection reabsorption effect. It should be possible to test many chemical aspects of hypothetical martian phenomena in experiments using the biology experimental configurations and derive much valuable information by comparisons with the Viking observations.

  15. LEP and results obtained by DELPHI after four years of operation

    International Nuclear Information System (INIS)

    Blocki, J.

    1993-10-01

    We characterize the most important problems of modern elementary particles physics, for the solution of which the LEP (Large Electron Positron) accelerator was built. We present the characteristics of this accelerator. The structure and properties of the DELPHI detector are described with special emphasis on the contribution of Polish groups. The most important results obtained so far in the LEP accelerator are discussed. (author). 12 refs, 17 figs, 1 tab

  16. Obtaining patient test results from clinical laboratories: a survey of state law for pharmacists.

    Science.gov (United States)

    Witry, Matthew J; Doucette, William R

    2009-01-01

    To identify states with laws that restrict to whom clinical laboratories may release copies of laboratory test results and to describe how these laws may affect pharmacists' ability to obtain patient laboratory test results. Researchers examined state statutes and administrative codes for all 50 states and the District of Columbia at the University of Iowa Law Library between June and July 2007. Researchers also consulted with lawyers, state Clinical Laboratory Improvement Amendments officers, and law librarians. Laws relating to the study objective were analyzed. 34 jurisdictions do not restrict the release of laboratory test results, while 17 states have laws that restrict to whom clinical laboratories can send copies of test results. In these states, pharmacists will have to use alternative sources, such as physician offices, to obtain test results. Pharmacists must consider state law before requesting copies of laboratory test results from clinical laboratories. This may be an issue that state pharmacy associations can address to increase pharmacist access to important patient information.

  17. Results of Investigative Tests of Gas Turbine Engine Compressor Blades Obtained by Electrochemical Machining

    Science.gov (United States)

    Kozhina, T. D.; Kurochkin, A. V.

    2016-04-01

    The paper highlights results of the investigative tests of GTE compressor Ti-alloy blades obtained by the method of electrochemical machining with oscillating tool-electrodes, carried out in order to define the optimal parameters of the ECM process providing attainment of specified blade quality parameters given in the design documentation, while providing maximal performance. The new technological methods suggested based on the results of the tests; in particular application of vibrating tool-electrodes and employment of locating elements made of high-strength materials, significantly extend the capabilities of this method.

  18. Does the public communication of science influence scientific vocation? Results of a national survey.

    Science.gov (United States)

    Stekolschik, Gabriel; Draghi, Cecilia; Adaszko, Dan; Gallardo, Susana

    2010-09-01

    The purpose of this work was to determine if public communication of science and technology (PCST) has any influence on people's decision to become dedicated to scientific research. For this reason, a national survey involving 852 researchers from all disciplines was conducted in Argentina. The results showed that the factors affecting scientific vocation are many, and that, regardless of differences in gender, age or discipline, the greatest influence on the decision to go into scientific research is exerted by teachers. The analysis also demonstrated that different manifestations of PCST (science books, press articles, audiovisual material, and activities such as visits to science museums) play a significant role in awakening the vocation for science. From these results it may be stated that PCST--in addition to its function of informing and forming citizens--exerts a significant influence in fostering scientific vocation.

  19. The effect of uncertainty of reactor parameters obtained using k0-NAA on result of analysis

    International Nuclear Information System (INIS)

    Sasajima, Fumio

    2006-01-01

    Neutron Activation Analysis using the k 0 method is a useful method allowing convenient and accurate simultaneous analysis of plural elements, eliminating the need for the use of comparative reference samples. As already well known, it is essential for the correct result of an analysis to obtain the α-factor and f-factor for a neutron spectrum in an irradiation field accurately when an attempt is made to use the k 0 method. For this reason, based on data obtained from the experiment conducted in the JRR-3 PN-3 system, how uncertainty of the measured values for α-factor and f-factor affects the result of an analysis was evaluated. The process of evaluation involved intentionally varying the values for reactor parameters followed by making an analysis of environmental reference samples (NIST SRM-1632c) using the k 0 method to examine the effect of these factors on the concentrations of 19 elements. The result of the evaluation revealed that the degree of the effect of uncertainty on the concentrations of 19 elements was at best approx. 1% under the condition of this experiment assuming that the factor α, a reactor parameter, had uncertainty of approx. 200%. (author)

  20. Multi-Grid detector for neutron spectroscopy: results obtained on time-of-flight spectrometer CNCS

    Science.gov (United States)

    Anastasopoulos, M.; Bebb, R.; Berry, K.; Birch, J.; Bryś, T.; Buffet, J.-C.; Clergeau, J.-F.; Deen, P. P.; Ehlers, G.; van Esch, P.; Everett, S. M.; Guerard, B.; Hall-Wilton, R.; Herwig, K.; Hultman, L.; Höglund, C.; Iruretagoiena, I.; Issa, F.; Jensen, J.; Khaplanov, A.; Kirstein, O.; Lopez Higuera, I.; Piscitelli, F.; Robinson, L.; Schmidt, S.; Stefanescu, I.

    2017-04-01

    The Multi-Grid detector technology has evolved from the proof-of-principle and characterisation stages. Here we report on the performance of the Multi-Grid detector, the MG.CNCS prototype, which has been installed and tested at the Cold Neutron Chopper Spectrometer, CNCS at SNS. This has allowed a side-by-side comparison to the performance of 3He detectors on an operational instrument. The demonstrator has an active area of 0.2 m2. It is specifically tailored to the specifications of CNCS. The detector was installed in June 2016 and has operated since then, collecting neutron scattering data in parallel to the He-3 detectors of CNCS. In this paper, we present a comprehensive analysis of this data, in particular on instrument energy resolution, rate capability, background and relative efficiency. Stability, gamma-ray and fast neutron sensitivity have also been investigated. The effect of scattering in the detector components has been measured and provides input to comparison for Monte Carlo simulations. All data is presented in comparison to that measured by the 3He detectors simultaneously, showing that all features recorded by one detector are also recorded by the other. The energy resolution matches closely. We find that the Multi-Grid is able to match the data collected by 3He, and see an indication of a considerable advantage in the count rate capability. Based on these results, we are confident that the Multi-Grid detector will be capable of producing high quality scientific data on chopper spectrometers utilising the unprecedented neutron flux of the ESS.

  1. Comparison of NDT techniques to evaluate CFRP. Results obtained in a MAIzfp round robin test

    Energy Technology Data Exchange (ETDEWEB)

    Grosse, Christian U. [Technische Univ. Muenchen (Germany). Chair of Non-destructive Testing; Goldammer, Matthias; Grager, Jan-Carl [Siemens AG Corporate Technology, Muenchen (Germany); and others

    2016-10-01

    Fiber reinforced polymeric materials are used for lightweight constructions and are an integral part of cars, airplanes or rotor blades of wind turbines. Nondestructive testing (NDT) methods play an increasing role concerning the manufacturing process and the inspection during lifetime. The selection of the best NDT technique for a certain application depends - of course - on many factors including the type, position and size of the defect to be detected but also on secondary issues like accessibility, automation, testing costs, reliability and resolution to mention only some. For the more technical-scientific part of these issues, the determination of the probability of detection (PoD) plays a significant role. Early in the design process questions should be raised concerning the probability with which certain attribute of interest (a defect that has an effect on the structural behavior) can be detected (and localized) in a certain construction. Several defect types have been identified to be critical like impact damages, undulations and porosity. Test samples out of differently processed Carbon Fiber-Reinforced Polymers (CFRP) as used in the automotive or aeronautical industry have been produced including defects of different type and size. In order to determine the PoD and to check whether a technique is applicable the different partners applied a broad variety of selected NDT techniques including Micro CT, Ultrasound (including phased-array and air-coupled UT), Active Thermography, Eddy Current, Vibration and Visual Analysis and Local Acoustic Resonance Spectroscopy (LARS). The presentation will summarize some of the results of the experiments and ongoing data analysis.

  2. Comparison of NDT techniques to evaluate CFRP. Results obtained in a MAIzfp round robin test

    International Nuclear Information System (INIS)

    Grosse, Christian U.

    2016-01-01

    Fiber reinforced polymeric materials are used for lightweight constructions and are an integral part of cars, airplanes or rotor blades of wind turbines. Nondestructive testing (NDT) methods play an increasing role concerning the manufacturing process and the inspection during lifetime. The selection of the best NDT technique for a certain application depends - of course - on many factors including the type, position and size of the defect to be detected but also on secondary issues like accessibility, automation, testing costs, reliability and resolution to mention only some. For the more technical-scientific part of these issues, the determination of the probability of detection (PoD) plays a significant role. Early in the design process questions should be raised concerning the probability with which certain attribute of interest (a defect that has an effect on the structural behavior) can be detected (and localized) in a certain construction. Several defect types have been identified to be critical like impact damages, undulations and porosity. Test samples out of differently processed Carbon Fiber-Reinforced Polymers (CFRP) as used in the automotive or aeronautical industry have been produced including defects of different type and size. In order to determine the PoD and to check whether a technique is applicable the different partners applied a broad variety of selected NDT techniques including Micro CT, Ultrasound (including phased-array and air-coupled UT), Active Thermography, Eddy Current, Vibration and Visual Analysis and Local Acoustic Resonance Spectroscopy (LARS). The presentation will summarize some of the results of the experiments and ongoing data analysis.

  3. The Interplay between Scientific Overlap and Cooperation and the Resulting Gain in Co-Authorship Interactions.

    Science.gov (United States)

    Mayrose, Itay; Freilich, Shiri

    2015-01-01

    Considering the importance of scientific interactions, understanding the principles that govern fruitful scientific research is crucial to policy makers and scientists alike. The outcome of an interaction is to a large extent dependent on the balancing of contradicting motivations accompanying the establishment of collaborations. Here, we assembled a dataset of nearly 20,000 publications authored by researchers affiliated with ten top universities. Based on this data collection, we estimated the extent of different interaction types between pairwise combinations of researchers. We explored the interplay between the overlap in scientific interests and the tendency to collaborate, and associated these estimates with measures of scientific quality and social accessibility aiming at studying the typical resulting gain of different interaction patterns. Our results show that scientists tend to collaborate more often with colleagues with whom they share moderate to high levels of mutual interests and knowledge while cooperative tendency declines at higher levels of research-interest overlap, suggesting fierce competition, and at the lower levels, suggesting communication gaps. Whereas the relative number of alliances dramatically differs across a gradient of research overlap, the scientific impact of the resulting articles remains similar. When considering social accessibility, we find that though collaborations between remote researchers are relatively rare, their quality is significantly higher than studies produced by close-circle scientists. Since current collaboration patterns do not necessarily overlap with gaining optimal scientific quality, these findings should encourage scientists to reconsider current collaboration strategies.

  4. The Interplay between Scientific Overlap and Cooperation and the Resulting Gain in Co-Authorship Interactions.

    Directory of Open Access Journals (Sweden)

    Itay Mayrose

    Full Text Available Considering the importance of scientific interactions, understanding the principles that govern fruitful scientific research is crucial to policy makers and scientists alike. The outcome of an interaction is to a large extent dependent on the balancing of contradicting motivations accompanying the establishment of collaborations. Here, we assembled a dataset of nearly 20,000 publications authored by researchers affiliated with ten top universities. Based on this data collection, we estimated the extent of different interaction types between pairwise combinations of researchers. We explored the interplay between the overlap in scientific interests and the tendency to collaborate, and associated these estimates with measures of scientific quality and social accessibility aiming at studying the typical resulting gain of different interaction patterns. Our results show that scientists tend to collaborate more often with colleagues with whom they share moderate to high levels of mutual interests and knowledge while cooperative tendency declines at higher levels of research-interest overlap, suggesting fierce competition, and at the lower levels, suggesting communication gaps. Whereas the relative number of alliances dramatically differs across a gradient of research overlap, the scientific impact of the resulting articles remains similar. When considering social accessibility, we find that though collaborations between remote researchers are relatively rare, their quality is significantly higher than studies produced by close-circle scientists. Since current collaboration patterns do not necessarily overlap with gaining optimal scientific quality, these findings should encourage scientists to reconsider current collaboration strategies.

  5. New high-definition thickness data obtained at tropical glaciers: preliminary results from Antisana volcano (Ecuador) using GPR prospection

    Science.gov (United States)

    Zapata, Camilo; Andrade, Daniel; Córdova, Jorge; Maisincho, Luis; Carvajal, Juan; Calispa, Marlon; Villacís, Marcos

    2014-05-01

    The study of tropical glaciers has been a significant contribution to the understanding of glacier dynamics and climate change. Much of the data and results have been obtained by analyzing plan-view images obtained by air- and space-borne sensors, as well as depth data obtained by diverse methodologies at selected points on the glacier surface. However, the measurement of glacier thicknesses has remained an elusive task in tropical glaciers, often located in rough terrains where the application of geophysical surveys (i.e. seismic surveys) requires logistics sometimes hardly justified by the amount of obtained data. In the case of Ecuador, however, where most glaciers have developed on active volcanoes and represent sources/reservoirs of fresh water, the precise knowledge of such information is fundamental for scientific research but also in order to better assess key aspects for the society. The relatively recent but fast development of the GPR technology has helped to obtain new highdefinition thickness data at Antisana volcano that will be used to: 1) better understand the dynamics and fate of tropical glaciers; 2) better estimate the amount of fresh water stored in the glaciers; 3) better assess the hazards associated with the sudden widespread melting of glaciers during volcanic eruptions. The measurements have been obtained at glaciers 12 and 15 of Antisana volcano, with the help of a commercial GPR equipped with a 25 MHz antenna. A total of 30 transects have been obtained, covering a distance of more than 3 km, from the glacier ablation zone, located at ~ 4600 masl, up to the level of 5200 masl. The preliminary results show a positive correlation between altitude and glacier thickness, with maximum and minimum calculated values reaching up to 80 m, and down to 15 m, respectively. The experience gained at Antisana volcano will be used to prepare a more widespread GPR survey in the glaciers of Cotopaxi volcano, whose implications in terms of volcanic hazards

  6. Deep-sequencing protocols influence the results obtained in small-RNA sequencing.

    Directory of Open Access Journals (Sweden)

    Joern Toedling

    Full Text Available Second-generation sequencing is a powerful method for identifying and quantifying small-RNA components of cells. However, little attention has been paid to the effects of the choice of sequencing platform and library preparation protocol on the results obtained. We present a thorough comparison of small-RNA sequencing libraries generated from the same embryonic stem cell lines, using different sequencing platforms, which represent the three major second-generation sequencing technologies, and protocols. We have analysed and compared the expression of microRNAs, as well as populations of small RNAs derived from repetitive elements. Despite the fact that different libraries display a good correlation between sequencing platforms, qualitative and quantitative variations in the results were found, depending on the protocol used. Thus, when comparing libraries from different biological samples, it is strongly recommended to use the same sequencing platform and protocol in order to ensure the biological relevance of the comparisons.

  7. BOOTES: Technological Developments and Scientific Results by a Stereoscopic System with two Stations Spaced by 240 km

    International Nuclear Information System (INIS)

    Mateo Sanguino, T. de J.; Castro-Tirado, A.J.; Ugarte Postigo, A. de; Gorosabel, J.; Fernandez Palomo, M.T.; Morena Carretero, B.A. de la; Castro Ceron, J.M.; Berna Galiano, J.A.; Pata, P.; Bernas, M.; Vitek, S.; Soldan, J.; Hudec, R.; Jelinek, M.; Kubanek, P.; McBreen, S.; Garcia Dabo, C.E.; Soria, T.; Torres Riera, J.

    2004-01-01

    An overview of the technological developments at the Burst Observer and Optical Transient Exploring System (BOOTES) is given. The most important scientific results obtained so far are the detection of an OT in the GRB 000313 error box and the non detection of optical emission simultaneous for GRB 010220. GRB 030226 (long/soft events), GRB 020531 and GRB 021201 (short/hard events). With the recent instrumental and technical developments, BOOTES multiplies its science capabilities

  8. Results obtained with the passive radiation detectors in the ICCHIBAN-4 experiment

    International Nuclear Information System (INIS)

    Bilski, P.; Horwacik, T.

    2005-05-01

    In frame of the InterComparison of Cosmic rays with Heavy Ions Beams at NIRS (ICCHIBAN) organized at the HIMAC accelerator in Chiba several types of the thermoluminescent detectors (TLD), as well as CR-39 track detectors, were exposed. Four different types of TLDs were used: MTS-7 ( 7 LiF:Mg,Ti), MTS-6 ( 6 LiF:Mg,Ti), MCP-7 ( 7 LiF:Mg,Cu,P) and MTT-7 ( 7 LiF:Mg,Ti with changed activator composition. All TLDs were manufactured at the Institute of Nuclear Physics (INP) in Cracow. The detectors were irradiated with various doses of He, C, Ne and Fe ions. Part of exposures were done in unknown conditions, to test measuring capabilities of the detectors. For analyses of these results, the method of obtaining information on ionisation density of an unknown radiation field, which is based on ratios of responses of different LiF detectors, was successfully used. (author)

  9. Experimental Results Obtained with Air Liquide Cold Compression System CERN LHC and SNS Projects

    CERN Document Server

    Delcayre, F; Hamber, F; Hilbert, B; Monneret, E; Toia, J L

    2006-01-01

    Large scale collider facilities will make intensive use of superconducting magnets, operating below 2.0 K. This dictates high‐capacity refrigeration systems operating below 2.0 K. These systems, making use of cryogenic centrifugal compressors in a series arrangement with room temperature screw compressors will be coupled to a refrigerator, providing a certain power at 4.5 K. A first Air Liquide Cold Compression System (CCS) unit was built and delivered to CERN in 2001. Installed at the beginning of 2002, it was commissioned and tested successfully during year 2002. A series of four sets of identical CCS were then tested in 2004. Another set of four cryogenic centrifugal compressors (CCC) has been delivered to Thomas Jefferson National Accelerator Facility (JLAB) for the Spallation Neutron Source (SNS) in 2002. These compressors were tested and commissioned from December 2004 to July 2005. The experimental results obtained with these systems will be presented and discussed: the characteristics of the CCC wil...

  10. First results obtained from the Cello liquid argon end cap calorimeters

    International Nuclear Information System (INIS)

    Le Diberder, F.

    1981-05-01

    The Cello liquid argon calorimeter is presented in the first part of this thesis. The cryogenic system has to supply three cryostats filled with liquid argon: one cylindrical cryostat of 25 m 3 volume contains 2x8 separate modules; each of the two symmetric end cap cryostats contains two half cylindrical modules. Each module in the end cap part consists of 42 layers of lead strips interleaved with 43 full plates. The strips are alternatively vertical, horizontal and circular. In front of the lead calorimeter are 4 planes of copper foils glued on epoxy for dE/dx measurement. The electronics, signal processing and data acquisition system are described. In the second part, the performance and analysis of data measured by the end cap calorimeters are reported: study of Bhabha scattering e + e - → e + e - ; preliminary results obtained in two photon physics e + e - → e + e - γγ → e + e - X [fr

  11. Report of test and research results on atomic energy obtained in national institutes in fiscal 1985

    International Nuclear Information System (INIS)

    1986-01-01

    As for the test and research on the utilization of atomic energy in national institutes, the budget was appropriated for the first time in fiscal year 1956, and since then, the many valuable results of research have been obtained so far in the diversified fields of nuclear fusion, safety research, the irradiation of foods, medicine and others, thus the test and research accomplished the large role for promoting the utilization of atomic energy in Japan. In this report, the gists of the results of the test and research on the utilization of atomic energy carried out by national institutes in fiscal year 1985 are collected. No.1 of this report was published in 1960, and this is No.26. It is desired to increase the understanding about the recent trend and the results of the test and research on atomic energy utilization with this book. The researches on nuclear fusion, engineering safety and environmental radioactivity safety, the irradiation of foods, the countermeasures against cancer, fertilized soil, the quality improvement of brewing and farm products, the protection of farm products and the improvement of breeding, diagnosis and medical treatment, pharmaceuticals, environmental hygiene, the application to physiology and pathology, radiochemistry, radiation measurement, process analysis, nuclear reactor materials, nuclear powered ships, civil engineering, radioactivation analysis and injury prevention are reported. (Kako, I.)

  12. Summary of personal neutron dosemeter results obtained within the EVIDOS project

    International Nuclear Information System (INIS)

    Luszik-Bhadra, M.; Reginatto, M.; Schuhmacher, H.; Bolognese-Milsztajn, T.; Lacoste, V.; Boschung, M.; Fiechtner, A.; Coeck, M.; Vanhavere, F.; Curzio, G.; Errico d', F.; Kylloenen, J.-E.; Lindborg, L.; Bartlett, D.; Tanner, R.

    2005-01-01

    Full text: Within the EC project EVIDOS ('Evaluation of Individual Dosimetry in Mixed Neutron and Photon Radiation Fields'), different types of neutron personal dosemeters were irradiated in workplace fields in nuclear installations in Europe. Mostly electronic personal neutron dosemeters were tested, among them commercial devices (Thermo Electron EPD-N, Aloka PDM-313), devices from first industrial prototype series (Thermo Electron EPD-N2, Saphydose-n) and laboratory prototypes which were already in the stage of lightweight battery-operated instruments (PTB DOS-2002). In addition, dosemeters with (almost) immediate readout (BTI bubble detectors, Rados DIS-N) and passive dosemeters which needed no fielddependent calibration factors (PADC track detectors from PSI and NRPB) were used, as well as those TLD albedo dosemeters which are routinely used in the facilities visited. The results of measurements obtained within the EVIDOS project in workplace fields in nuclear installations in Europe, i.e. at Kruemmel (boiling water reactor, transport cask), at Mol (Venus research reactor, fuel facility Belgonucleaire) and at Ringhals (pressurized water reactor, transport cask) are presented and compared to reference values of personal dose equivalent H p (10) determined by means of Bonner spheres and novel directional spectrometers. In fields with strong back-scatter and moderation of neutrons, several dosemeters showed overreadings by more than a factor of two. In strongly directed fields with neutron dose equivalent peaked at about 1 MeV (MOX fuel), the same dosemeters showed under-readings of about a factor of two. These under- and over-readings in the workplace fields can be explained in terms of the dosemeter response functions for mono-energetic neutrons, which show over-responses in the thermal and intermediate neutron energy region and under-responses at about 1 MeV neutron energy. The dosemeter readings obtained in the workplace fields were checked for consistency by

  13. Results from CrIS-ATMS Obtained Using the AIRS Science Team Retrieval Methodology

    Science.gov (United States)

    Susskind, Joel; Kouvaris, Louis C.; Iredell, Lena

    2013-01-01

    AIRS was launched on EOS Aqua in May 2002, together with AMSU-A and HSB (which subsequently failed early in the mission), to form a next generation polar orbiting infrared and microwave atmospheric sounding system. AIRS/AMSU had two primary objectives. The first objective was to provide real-time data products available for use by the operational Numerical Weather Prediction Centers in a data assimilation mode to improve the skill of their subsequent forecasts. The second objective was to provide accurate unbiased sounding products with good spatial coverage that are used to generate stable multi-year climate data sets to study the earth's interannual variability, climate processes, and possibly long-term trends. AIRS/AMSU data for all time periods are now being processed using the state of the art AIRS Science Team Version-6 retrieval methodology. The Suomi-NPP mission was launched in October 2011 as part of a sequence of Low Earth Orbiting satellite missions under the "Joint Polar Satellite System" (JPSS). NPP carries CrIS and ATMS, which are advanced infra-red and microwave atmospheric sounders that were designed as follow-ons to the AIRS and AMSU instruments. The main objective of this work is to assess whether CrIS/ATMS will be an adequate replacement for AIRS/AMSU from the perspective of the generation of accurate and consistent long term climate data records, or if improved instruments should be developed for future flight. It is critical for CrIS/ATMS to be processed using an algorithm similar to, or at least comparable to, AIRS Version-6 before such an assessment can be made. We have been conducting research to optimize products derived from CrIS/ATMS observations using a scientific approach analogous to the AIRS Version-6 retrieval algorithm. Our latest research uses Version-5.70 of the CrIS/ATMS retrieval algorithm, which is otherwise analogous to AIRS Version-6, but does not yet contain the benefit of use of a Neural-Net first guess start-up system

  14. Experimental results obtained with the simulated cold moderator system. System characteristics and technical issues

    CERN Document Server

    Aso, T; Hino, R; Kaminaga, M; Kinoshita, H; Takahashi, T

    2002-01-01

    The Japan Atomic Energy Research Institute and the High Energy Accelerator Research Organization have been developing a Mega-Watt scale spallation target system. In the system, neutrons generated in a target are sorted out their energy to the proper values in liquid-hydrogen moderators. Then, the liquid-hydrogen is forced to circulate in order to suppress hydrogen temperature increase. In the operation of moderators, it is very important to establish a safety protection system against emergency shutdown of the accelerator or accidents of the cold moderator system. In order to obtain a technical data for design and safety review of the liquid-hydrogen system, we have fabricated an experimental apparatus simulated the cold moderator system using liquid nitrogen (max. 1.5 MPa, mini. 77 K) instead of liquid hydrogen. The experiments on a controllability of the system were carried out to investigate dynamic characteristics of the system. This report presents the experimental results and technical issues for the co...

  15. Experimental Results Obtained with Air Liquide Cold Compression System: CERN LHC and SNS Projects

    Science.gov (United States)

    Delcayre, F.; Courty, J.-C.; Hamber, F.; Hilbert, B.; Monneret, E.; Toia, J.-L.

    2006-04-01

    Large scale collider facilities will make intensive use of superconducting magnets, operating below 2.0 K. This dictates high-capacity refrigeration systems operating below 2.0 K. These systems, making use of cryogenic centrifugal compressors in a series arrangement with room temperature screw compressors will be coupled to a refrigerator, providing a certain power at 4.5 K. A first Air Liquide Cold Compression System (CCS) unit was built and delivered to CERN in 2001. Installed at the beginning of 2002, it was commissioned and tested successfully during year 2002. A series of four sets of identical CCS were then tested in 2004. Another set of four cryogenic centrifugal compressors (CCC) has been delivered to Thomas Jefferson National Accelerator Facility (JLAB) for the Spallation Neutron Source (SNS) in 2002. These compressors were tested and commissioned from December 2004 to July 2005. The experimental results obtained with these systems will be presented and discussed: the characteristics of the CCC will be detailed. The principles of control for the CCC in series will be detailed.

  16. The results obtained by INR-Pitesti to an international in-situ intercomparison exercise

    International Nuclear Information System (INIS)

    Dobrin, Relu; Dulama, Cristian; Toma, Alexandru

    2008-01-01

    Full text: The determination of soil contamination, dose rate measurements and in-situ gamma spectrometry are well established and widely used measurement procedures, especially after large scale nuclear incidents. To support decision makers and first responders with a more comprehensive and accurate overview immediately after a large scale nuclear or radiological emergency, as releases from a nuclear power plant or a terrorist attack with a dirty bomb, a fast and clear presentation of measurement data is indispensable. In 2007, the Austrian Research Centers GmbH - ARC (Seibersdorf) in cooperation with IAEA and the Austrian NBC Defense School organized an international measurement campaign, 'In-Situ Intercomparison Scenario' ISIS 2007, with the focus on In-Situ Gamma Spectrometry and Dose Rate Measurements in Emergency Situations. 56 teams from 25 countries, worldwide, took part to this exercise. The only Romanian team was 'CROWN'. The CROWN Laboratory is part of the Radiation Protection Laboratory of the Institute for Nuclear Research - Pitesti, certified for characterization of radioactive wastes and nuclear materials. The paper presents results obtained during different tasks of the exercise: 'Dose rate mapping'; 'Localization - Drive by'; 'Simulation of a contamination'; 'Identification Shielded; 'Identification/Quantification'; 'Buried sources; 'Environmental measurement'. (authors)

  17. Experimental results obtained with the simulated cold moderator system. System characteristics and technical issues

    Energy Technology Data Exchange (ETDEWEB)

    Aso, Tomokazu; Kaminaga, Masanori; Haga, Katsuhiro; Kinoshita, Hidetaka; Takahashi, Toshio; Hino, Ryutaro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2002-12-01

    The Japan Atomic Energy Research Institute and the High Energy Accelerator Research Organization have been developing a Mega-Watt scale spallation target system. In the system, neutrons generated in a target are sorted out their energy to the proper values in liquid-hydrogen moderators. Then, the liquid-hydrogen is forced to circulate in order to suppress hydrogen temperature increase. In the operation of moderators, it is very important to establish a safety protection system against emergency shutdown of the accelerator or accidents of the cold moderator system. In order to obtain a technical data for design and safety review of the liquid-hydrogen system, we have fabricated an experimental apparatus simulated the cold moderator system using liquid nitrogen (max. 1.5 MPa, mini. 77 K) instead of liquid hydrogen. The experiments on a controllability of the system were carried out to investigate dynamic characteristics of the system. This report presents the experimental results and technical issues for the construction of a practical liquid-hydrogen moderator system of the Mega-Watt scale target system. (author)

  18. Assessing and Adapting Scientific Results for Space Weather Research to Operations (R2O)

    Science.gov (United States)

    Thompson, B. J.; Friedl, L.; Halford, A. J.; Mays, M. L.; Pulkkinen, A. A.; Singer, H. J.; Stehr, J. W.

    2017-12-01

    Why doesn't a solid scientific paper necessarily result in a tangible improvement in space weather capability? A well-known challenge in space weather forecasting is investing effort to turn the results of basic scientific research into operational knowledge. This process is commonly known as "Research to Operations," abbreviated R2O. There are several aspects of this process: 1) How relevant is the scientific result to a particular space weather process? 2) If fully utilized, how much will that result improve the reliability of the forecast for the associated process? 3) How much effort will this transition require? Is it already in a relatively usable form, or will it require a great deal of adaptation? 4) How much burden will be placed on forecasters? Is it "plug-and-play" or will it require effort to operate? 5) How can robust space weather forecasting identify challenges for new research? This presentation will cover several approaches that have potential utility in assessing scientific results for use in space weather research. The demonstration of utility is the first step, relating to the establishment of metrics to ensure that there will be a clear benefit to the end user. The presentation will then move to means of determining cost vs. benefit, (where cost involves the full effort required to transition the science to forecasting, and benefit concerns the improvement of forecast reliability), and conclude with a discussion of the role of end users and forecasters in driving further innovation via "O2R."

  19. Preliminary observations and results obtained with the ultraviolet spectrometer and polarimeter

    International Nuclear Information System (INIS)

    Tandberg-Hanssen, E.; Athay, R.G.; Beckers, J.M.; Brandt, J.C.; Bruner, E.C.; Chapman, R.D.; Cheng, C.C.; Burman, J.G.; Henze, W.; Hyder, C.L.; Michalitsianos, A.G.; Shine, R.A.; Schoolman, S.A.; Woodgate, B.E.

    1981-01-01

    We present new observations with the Ultraviolet Spectrometer and Polarimeter (UVSP) of a number of manifestations of solar activity obtained during the first 3 months of Solar Maximum Mission operations

  20. Seasonal differences in the subjective assessment of outdoor thermal conditions and the impact of analysis techniques on the obtained results

    Science.gov (United States)

    Kántor, Noémi; Kovács, Attila; Takács, Ágnes

    2016-11-01

    Wide research attention has been paid in the last two decades to the thermal comfort conditions of different outdoor and semi-outdoor urban spaces. Field studies were conducted in a wide range of geographical regions in order to investigate the relationship between the thermal sensation of people and thermal comfort indices. Researchers found that the original threshold values of these indices did not describe precisely the actual thermal sensation patterns of subjects, and they reported neutral temperatures that vary among nations and with time of the year. For that reason, thresholds of some objective indices were rescaled and new thermal comfort categories were defined. This research investigates the outdoor thermal perception patterns of Hungarians regarding the Physiologically Equivalent Temperature ( PET) index, based on more than 5800 questionnaires. The surveys were conducted in the city of Szeged on 78 days in spring, summer, and autumn. Various, frequently applied analysis approaches (simple descriptive technique, regression analysis, and probit models) were adopted to reveal seasonal differences in the thermal assessment of people. Thermal sensitivity and neutral temperatures were found to be significantly different, especially between summer and the two transient seasons. Challenges of international comparison are also emphasized, since the results prove that neutral temperatures obtained through different analysis techniques may be considerably different. The outcomes of this study underline the importance of the development of standard measurement and analysis methodologies in order to make future studies comprehensible, hereby facilitating the broadening of the common scientific knowledge about outdoor thermal comfort.

  1. Preliminary observations and results obtained with the ultraviolet spectrometer and polarimeter. [for Solar Maximum Mission

    Science.gov (United States)

    Tandberg-Hassen, E.; Cheng, C. C.; Athay, R. G.; Beckers, J. M.; Brandt, J. C.; Chapman, R. D.; Bruner, E. C.; Henze, W.; Hyder, C. L.; Gurman, J. B.

    1981-01-01

    New observation with the Ultraviolet Spectrometer and Polarimeter (UVSP) of a number of manifestations of solar activity obtained during the first three months of Solar Maximum Mission operations are presented. Attention is given to polarimetry in sunspots, oscillations above sunspots, density diagnostics of transition-zone plasmas in active regions, and the eruptive prominence - coronal transient link.

  2. Scientific citations favor positive results: a systematic review and meta-analysis.

    Science.gov (United States)

    Duyx, Bram; Urlings, Miriam J E; Swaen, Gerard M H; Bouter, Lex M; Zeegers, Maurice P

    2017-08-01

    Citation bias concerns the selective citation of scientific articles based on their results. We brought together all available evidence on citation bias across scientific disciplines and quantified its impact. An extensive search strategy was applied to the Web of Science Core Collection and Medline, yielding 52 studies in total. We classified these studies on scientific discipline, selection method, and other variables. We also performed random-effects meta-analyses to pool the effect of positive vs. negative results on subsequent citations. Finally, we checked for other determinants of citation as reported in the citation bias literature. Evidence for the occurrence of citation bias was most prominent in the biomedical sciences and least in the natural sciences. Articles with statistically significant results were cited 1.6 (95% confidence interval [CI] 1.3-1.8) times more often than articles with nonsignificant results. Articles in which the authors explicitly conclude to have found support for their hypothesis were cited 2.7 (CI 2.0-3.7) times as often. Article results and journal impact factor were associated with citation more often than any other reported determinant. Similar to what we already know on publication bias, also citation bias can lead to an overrepresentation of positive results and unfounded beliefs. Copyright © 2017 Elsevier Inc. All rights reserved.

  3. Post mortem scientific sampling and the search for causes of death in intensive care: what information should be given and what consent should be obtained?

    Science.gov (United States)

    Rigaud, J P; Quenot, J P; Borel, M; Plu, I; Hervé, C; Moutel, G

    2011-03-01

    The search for cause of death is important to improve knowledge and provide answers for the relatives of the deceased. Medical autopsy following unexplained death in hospital is one way to identify cause of death but is difficult to carry out routinely. Post mortem sampling (PMS) of tissues via thin biopsy needle or 'mini incisions' in the skin may be a useful alternative. A study was undertaken to assess how this approach is perceived by intensive care doctors and also to evaluate how this practice is considered in ethical terms in France. A study of PMS practices immediately after death in 10 intensive care departments was performed. The medical director of each centre was interviewed by telephone and asked to describe practices in their unit and to outline the questions raised by this practice. PMS is routinely performed in 70% of the units which responded, without systematically obtaining formal consent and without precise rules for communicating results. Approaches to PMS differed between centres, but all physicians felt that PMS is useful for the scientific information it gives and also for the information it provides for relatives. All physicians regret the lack of standards to structure PMS practices. Information from post mortem examinations is important for society to inform about causes of death, for doctors to improve practices and for decision-makers responsible for organising care. Debate persists regarding the balance between individual rights and community interests. It is suggested that an approach for identifying cause of death could easily be integrated into the relationship between carers and relatives, provided full transparency is maintained.

  4. Analysis of results obtained from field tracing test under natural rain condition

    International Nuclear Information System (INIS)

    Mukai, M.; Kamiyama, H.; Tanaka, T.; Wang Zhiming; Zhao Yingjie; Li Zhengtang

    1993-01-01

    As one of the tests arranged by the cooperative research between CIRP and JAERI, field tracing tests using 3 H, 60 Co, 85 Sr and 134 Cs were conducted in pits at the CIRP's field test site located on a loess tableland under natural rain condition. Precipitation amount and evaporation rate were measured to study complicated spatial-temporal behavior of soil water movement under that condition. The evaporation rate was obtained through an analysis on the measured data by a combined method of heat balance and eddy correlation. Numerical model, that is based on piston flow assumption of soil water movement, was developed and applied to determine the behavior of the soil water movement in the pits. Using the determined water movement, 3 H migration was evaluated by numerical simulation. Change of 3 H distribution as a function of elapsed time as well explained by careful evaluation of the soil water movement that carried out before the analysis. (5 figs.)

  5. Preliminary Results from Duplex Procedure for Obtain of Fe Based Materials for Automotive Applications

    Science.gov (United States)

    Crăciun, R. C.; Stanciu, S.; Geantă, V.; Voiculescu, I.; Manole, V.; Gârneţ, I. A.; Alexandru, A.; Cimpoesu, N.; Săndulache, F.

    2017-06-01

    Abstract Iron based materials still represent a high percentage from metallic materials used in industry, in general, and in automotive industry, in particular. In this case we used a duplex process in order to obtain the FeMnSiAl experimental alloy for a more efficient use of various units. In the first stage iron, manganese, silicon and aluminum were melted and mixed together using arc melting technology and for the second stage the alloy was re-melt for homogeneity in an induction furnace. Chemical composition, after each melting step, was analyzed using EDS Bruker detector for various areas and microstructural characterization using SEM, VegaTescan LMH II with SE detector, equipment. This alloy is proposed as a metallic approach of mechanical dumpers used in automotive industry for low and medium impact contacts.

  6. Improving the trust in results of numerical simulations and scientific data analytics

    Energy Technology Data Exchange (ETDEWEB)

    Cappello, Franck [Argonne National Lab. (ANL), Argonne, IL (United States); Constantinescu, Emil [Argonne National Lab. (ANL), Argonne, IL (United States); Hovland, Paul [Argonne National Lab. (ANL), Argonne, IL (United States); Peterka, Tom [Argonne National Lab. (ANL), Argonne, IL (United States); Phillips, Carolyn [Argonne National Lab. (ANL), Argonne, IL (United States); Snir, Marc [Argonne National Lab. (ANL), Argonne, IL (United States); Wild, Stefan [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-04-30

    This white paper investigates several key aspects of the trust that a user can give to the results of numerical simulations and scientific data analytics. In this document, the notion of trust is related to the integrity of numerical simulations and data analytics applications. This white paper complements the DOE ASCR report on Cybersecurity for Scientific Computing Integrity by (1) exploring the sources of trust loss; (2) reviewing the definitions of trust in several areas; (3) providing numerous cases of result alteration, some of them leading to catastrophic failures; (4) examining the current notion of trust in numerical simulation and scientific data analytics; (5) providing a gap analysis; and (6) suggesting two important research directions and their respective research topics. To simplify the presentation without loss of generality, we consider that trust in results can be lost (or the results’ integrity impaired) because of any form of corruption happening during the execution of the numerical simulation or the data analytics application. In general, the sources of such corruption are threefold: errors, bugs, and attacks. Current applications are already using techniques to deal with different types of corruption. However, not all potential corruptions are covered by these techniques. We firmly believe that the current level of trust that a user has in the results is at least partially founded on ignorance of this issue or the hope that no undetected corruptions will occur during the execution. This white paper explores the notion of trust and suggests recommendations for developing a more scientifically grounded notion of trust in numerical simulation and scientific data analytics. We first formulate the problem and show that it goes beyond previous questions regarding the quality of results such as V&V, uncertainly quantification, and data assimilation. We then explore the complexity of this difficult problem, and we sketch complementary general

  7. DoSSiER: Database of Scientific Simulation and Experimental Results

    CERN Document Server

    Wenzel, Hans; Genser, Krzysztof; Elvira, Daniel; Pokorski, Witold; Carminati, Federico; Konstantinov, Dmitri; Ribon, Alberto; Folger, Gunter; Dotti, Andrea

    2017-01-01

    The Geant4, GeantV and GENIE collaborations regularly perform validation and regression tests for simulation results. DoSSiER (Database of Scientific Simulation and Experimental Results) is being developed as a central repository to store the simulation results as well as the experimental data used for validation. DoSSiER can be easily accessed via a web application. In addition, a web service allows for programmatic access to the repository to extract records in json or xml exchange formats. In this article, we describe the functionality and the current status of various components of DoSSiER as well as the technology choices we made.

  8. Vehicle Animation Software (VAS) to Animate Results Obtained from Vehicle Handling and Rollover Simulations and Tests

    Science.gov (United States)

    1991-04-01

    Results from vehicle computer simulations usually take the form of numeric data or graphs. While these graphs provide the investigator with the insight into vehicle behavior, it may be difficult to use these graphs to assess complex vehicle motion. C...

  9. Acoustic emission results obtained from testing the ZB-1 intermediate scale pressure vessel

    International Nuclear Information System (INIS)

    Hutton, P.H.; Kurtz, R.J.; Pappas, R.A.; Dawson, J.F.; Dake, L.S.; Skorpik, J.R.

    1985-09-01

    Acoustic emission (AE) monitoring of flaw growth in an intermediate scale vessel during cyclic loading at 65 0 C and 288 0 C is described in this report. The report deals with background, methodology, and results. The work discussed is of major significance in a program supported by NRC to develop and demonstrate application of AE monitoring for continuous surveillance of reactor pressure boundaries to detect and evaluate growing flaws. Several areas of technical concern are addressed. Results support the feasibility of effective continuous monitoring

  10. Occupational radioprotection program at Nuclear Engineering Institute -IEN: results obtained in 1991

    International Nuclear Information System (INIS)

    Fajardo, P.W.; Pastura, V.F.S.; Soares, M.L.; LeRoy, C.L.; Teixeira, M.V.; Santos, I.H.T.; Pujol Filho, S.V.

    1992-01-01

    The results of occupational radioprotection program at Nuclear Engineering Institute-IEN- in 1991 are presented. The personnel monitoring, the routine monitoring of limited areas, the operational monitoring during the operation and the cyclotron CV-28 maintenance, the radioisotope processing and Argonauta Reactor operation, the control of radioprotection equipment and the control of radiation sources are included. (C.G.C.)

  11. Alecto - results obtained with homogeneous critical experiments on plutonium 239, uranium 235 and uranium 233

    International Nuclear Information System (INIS)

    Bruna, J.G.; Brunet, J.P.; Caizegues, R.; Clouet d'Orval, Ch.; Kremser, J.; Tellier, H.; Verriere, Ph.

    1965-01-01

    In this report are given the results of the homogeneous critical experiments ALECTO, made on plutonium 239, uranium 235 and uranium 233. After a brief description of the equipment, the critical masses for cylinders of diameters varying from 25 to 42 cm, are given and compared with other values (foreign results, criticality guide). With respect to the specific conditions of neutron reflection in the ALECTO experiments the minimal values of critical masses are: Pu239 M c = 910 ± 10 g, U235 M c = 1180 ± 12 g and U233 M c = 960 ± 10 g. Experiments relating to cross sections and constants to be used on these materials are presented. Lastly, kinetic experiments allow to compare pulsed neutron methods to fluctuation methods [fr

  12. Macromolecular crystallographic results obtained using a 2048x2048 CCD detector at CHESS

    International Nuclear Information System (INIS)

    Thiel, D.J.; Ealick, S.E.; Tate, M.W.; Gruner, S.M.; Eikenberry, E.F.

    1996-01-01

    We present results of macromolecular crystallographic experiments performed at the Cornell High Energy Synchrotron Source (CHESS) with a new CCD-based detector. This detector, installed in January 1995, complements a 1024x1024 CCD detector that has been in continuous operation at CHESS since December 1993. The new detector is based on a 4-port, 2048x2048 pixel CCD that is directly coupled to a Gd 2 O 2 S:Tb phosphor by a 3:1 tapered fiber optic. The active area of the phosphor is a square 82 mm on an edge. The readout time is 7 seconds. In the standard mode of operation, the pixel size at the active area is 41 μm on the edge leading to the capability of resolving approximately 200 orders of diffraction across the detector face. The detector also operates in a 1024x1024 mode in which the pixel size is electronically increased by a factor of 4 in area resulting in smaller data files and faster detector readout but at the expense of spatial resolution. Most of the data that has been collected by this detector has been collected in this mode. Dozens of data sets have been collected by many experimenters using this detector at CHESS during the four month period from its installation until the start of the six-month down period of the storage ring. The capabilities of the detector will be illustrated with results from various crystallographic measurements including experiments in which the recorded diffraction patterns extend in resolution as far as 1 A. The results demonstrate that this detector is capable of collecting data of quality at least equal to that of imaging plates but, in many circumstances, with much greater beamline efficiency. copyright 1996 American Institute of Physics

  13. Irradiation devices for fusion reactor materials results obtained from irradiated lithium aluminate at the OSIRIS reactor

    International Nuclear Information System (INIS)

    Lefevre, F.; Thevenot, G.; Rasneur, B.; Botter, F.

    1986-06-01

    Studies about controlled fusion reactor of the Tokamak type require the examination of the radiation effects on the behaviour of various potential materials. Thus, in the first part of this paper, are presented the devices adapted to these materials studies and used in the OSIRIS reactor. In a second part, is described an experiment of irradiation ceramics used as candidates for breeding material and are given the first results

  14. Report of test and research results on atomic energy obtained in national institutes in fiscal 1987

    International Nuclear Information System (INIS)

    1989-01-01

    The test and research regarding the utilization of atomic energy carried out in national institutions have produced many valuable results in diverse fields so far, such as nuclear fusion, safety research, food irradiation and medicine, since the budget had been appropriated for the first time in 1956. It has accomplished large role in the promotion of atomic energy utilization in Japan. This report is volume 28, in which the results of the test and research on atomic energy utilization carried out by national institutions in fiscal year 1987 are summarized. It is hoped that the understanding about the recent trend and the results of the test and research on atomic energy utilization is further promoted by this report. The contents of this report are nuclear fusion; the research on engineering safety and environmental radioactivity safety; food irradiation; the countermeasures against cancer; fertilized soil, the improvement of quality, the protection of plants and the improvement of breeding in agriculture and fishery fields; diagnosis and medical treatment, pharmaceuticals, environmental hygiene and the application to physiology and pathology in medical field; radiation measurement and process analysis in mining and industry fields; nuclear reactor materials and nuclear-powered ships; civil engineering; radioactivation analysis; the research on the prevention of injuries; and the basic researches on materials and acessment and reduction of irradiation risk. (J.P.N.)

  15. Report of test and research results on atomic energy obtained in national institutes in fiscal 1986

    International Nuclear Information System (INIS)

    1988-01-01

    The test and research regarding the utilization of atomic energy carried out in national institutions have produced many valuable results in diverse fields so far, such as nuclear fusion, safety research, food irradiation and medicine, since the budget had been appropriated for the first time in 1956. It has accomplished large role in the promotion of atomic energy utilization in Japan. This report is volume 27, in which the results of the test and research on atomic energy utilization carried out by national institutions in fiscal year 1986 are summarized. It is hoped that the understanding about the recent trend and the results of the test and research on atomic energy utilization is further promoted by this report. The contents of this report are nuclear fusion; the research on engineering safety and environmental radioactivity safety; food irradiation; the countermeasures against cancer; fertilized soil, the improvement of quality, the protection of plants and the improvement of breeding in agriculture and fishery fields; diagnosis and medical treatment, pharmaceuticals, environmental hygiene and the application to physiology and pathology in medical field; radiation chemistry and radiation measurement in mining and industry fields; nuclear reactor materials and nuclear-powered ships; civil engineering; radioactivation analysis; and the research on the prevention of injuries. (Kako, I.)

  16. Report of test and research results on atomic energy obtained in national institutes in fiscal 1984

    International Nuclear Information System (INIS)

    1985-01-01

    The test and research regarding the utilization of atomic energy carried out in national institutions have produced many valuable results in diverse fields so far, such as nuclear fusion, safety research, food irradiation and medicine, since the budget had been appropriated for the first time in 1956. It has accomplished large role in the promotion of atomic energy utilization in Japan. This report is Volume 25, in which the results of the test and research on atomic energy utilization carried out by national institutions in fiscal year 1984 are summarized. It is hoped that the understanding about the recent trend and the results of the test and research on atomic energy utilization is further promoted by this report. The contents of this report are nuclear fusion; the research on engineering safety and environmental radioactivity safety; food irradiation; the countermeasures against cancer; fertilized soil, the improvement of quality, the protection of plants and the improvement of breeding in agriculture and fishery fields; diagnosis and medical treatment, pharmaceuticals, environmental hygiene and the application to physiology and pathology in medical field; radiation chemistry and radiation measurement in mining and industry fields; nuclear reactor materials and nuclear-powered ships; civil engineering; radioactivation analysis; and the research on the prevention of injuries. (Kako, I.)

  17. Radon in Estonian buildings. Establishment of a measurement system and obtained results

    International Nuclear Information System (INIS)

    Pahapill, L.; Rulkov, A.; Swedjemark, G.A.

    1996-12-01

    One purpose of this project was the establishment of a radon monitoring programme inside the state environmental monitoring programme. Another purpose was to investigate regions, expected to have high radon levels indoors. A new method for the long-term measurement of indoor radon was established and the staff for these measurements was trained. The results of the measurement can be used by Estonian decision-makers to work out rules and standards. There is no legislative act in the field of radiation in Estonian at this time. To summarize the results of the measurements we can say that indoor radon concentrations vary by region. The radon investigations must be continued to identify the risk areas and types of housing construction. The results of the state radon monitoring are provided to the municipalities, who advice the owners of planned new houses to select the right construction for the house. A new project will follow with an investigation of radon in randomly selected dwellings, training and equipment for radon measurement in soil, and general advice with regard to radon, as well as assistance in preparing information about radon. 7 refs, 5 figs

  18. Experimental results on advanced inertial fusion schemes obtained within the HiPER project

    International Nuclear Information System (INIS)

    Batani, Dimitri; Santos, Jorge J.; Schurtz, Guy; Hulin, Sebastien; Ribeyre, Xavier; Nicolai, Philippe; Vauzour, Benjamin; Dorchies, Fabien; Gizzi, Leonida A.; Koester, Petra; Labate, Luca; Honrubia, Javier; Antonelli, Luca; Morace, Alessio; Volpe, Luca; Nazarov, Wiger; Pasley, John; Richetta, Maria; Lancaster, Kate; Spindloe, Christopher; Tolley, Martin; Neely, David; Kozlova, Michaela; Nejdl, Jaroslav; Rus, Bedrich; Wolowski, Jerzy; Badziak, Jan

    2012-01-01

    This paper presents the results of experiments conducted within the Work Package 10 (fusion experimental programme) of the HiPER project. The aim of these experiments was to study the physics relevant for advanced ignition schemes for inertial confinement fusion, i.e. the fast ignition and the shock ignition. Such schemes allow to achieve a higher fusion gain compared to the indirect drive approach adopted in the National Ignition Facility in United States, which is important for the future inertial fusion energy reactors and for realising the inertial fusion with smaller facilities. (authors)

  19. Report of test and research results on atomic energy obtained in national institutes in fiscal 1990

    International Nuclear Information System (INIS)

    1991-01-01

    The tests and researches on the development and utilization of atomic energy in national laboratories were begun in 1956, and have accomplished the great role for the advance of the development and utilization of atomic energy in Japan by having produced many valuable results so far. Atomic energy has been utilized in diverse fields, and also in national laboratories, the research for expanding the development and utilization of atomic energy in food irradiation, medicine, agriculture, forestry, fishery and others in addition to the basic research on nuclear fusion and safety have been advanced. Further expecting the pervasive effect to general science and technology, the development of basic technology and integrated research are promoted from the viewpoint of new techical innovation and creative technology. This is 31st report in which the results of the tests and researches carried out by national laboratories in fiscal year 1990 are summarized. Nuclear fusion, safety research, food irradiation, cancer countermeasures, agriculture, forestry, fishery, medicine, mining and manufacture, power utilization, construction, radioactivation analysis and so on were the main subjects. (K.I.)

  20. Report of test and research results on atomic energy obtained in national institutes in fiscal 1982

    International Nuclear Information System (INIS)

    1983-01-01

    As for the test and research on the utilization of atomic energy by national organizations, the budget was appropriated for the first time in fiscal year 1956. Since then, many valuable results of research have been produced in the diverse fields of nuclear fusion, safety research, food irradiation, medicine and others, in this way, the test and research have played large roles in the promotion of the utilization of atomic energy in Japan. This is the 23rd report, in which the results of the test and research on the utilization of atomic energy carried out in fiscal year 1982 by national organizations are summarized. 5 researches on nuclear fusion, 12 researches on engineering safety, 5 researches on environmental radioactivity safety, 3 researches on food irradiation, 5 researches on the countermeasures to cancer, 8 researches on soil fertilization, 4 researches on quality improvement, 7 researches on crop protection, 5 researches on the improvement of breeding, 8 researches on diagnosis and treatment, 8 researches on pharmaceuticals, 10 researches on the application to pathology, 6 researches on mining and industry, 6 researches on power reactors and nuclear ships, 1 research on underground water, 6 researches on activation analysis and 3 researches on injury prevention are reported. (Kako, I.)

  1. Report of test and research results on atomic energy obtained in national institutes in fiscal 1983

    International Nuclear Information System (INIS)

    1984-01-01

    As for the test and research on the utilization of atomic energy by national organizations, the budget was appropriated for the first time in fiscal year 1956. Since then, many valuable results of research have been produced in the diverse fields of nuclear fusion, safety research, food irradiation, medicine and others, in this way, the test and research have played large roles in the promotion of the utilization of atomic energy in Japan. This is the 24th report, in which the results of the test and research on the utilization of atomic energy carried out in fiscal year 1983 by national organizations are summarized. 5 researches on nuclear fusion, 19 researches on engineering safety and environmental radioactivity safety, 3 researches on food irradiation, 6 researches on the countermeasures to cancer, 19 researches on agriculture, forestry and fishery, 30 researches on medicine, pharmaceuticals and environmental hygiene, 6 researches on mining and industry, 6 researches on power reactors and nuclear ships, 1 research on agricultural water, 7 researches on activation analysis and 4 researches on injury prevention are reported. (Kako, I.)

  2. Aircrew Exposure To Cosmic Radiation Evaluated By Means Of Several Methods; Results Obtained In 2006

    International Nuclear Information System (INIS)

    Ploc, Ondrej; Spurny, Frantisek; Jadrnickova, Iva; Turek, Karel

    2008-01-01

    Routine evaluation of aircraft crew exposure to cosmic radiation in the Czech Republic is performed by means of calculation method. Measurements onboard aircraft work as a control tool of the routine method, as well as a possibility of comparison of results measured by means of several methods. The following methods were used in 2006: (1) mobile dosimetry unit (MDU) type Liulin--a spectrometer of energy deposited in Si-detector; (2) two types of LET spectrometers based on the chemically etched track detectors (TED); (3) two types of thermoluminescent detectors; and (4) two calculation methods. MDU represents currently one of the most reliable equipments for evaluation of the aircraft crew exposure to cosmic radiation. It is an active device which measures total energy depositions (E dep ) in the semiconductor unit, and, after appropriate calibration, is able to give a separate estimation for non-neutron and neutron-like components of H*(10). This contribution consists mostly of results acquired by means of this equipment; measurements with passive detectors and calculations are mentioned because of comparison. Reasonably good agreement of all data sets could be stated

  3. Report of test and research results on atomic energy obtained in national institutes in fiscal 1992

    International Nuclear Information System (INIS)

    1994-01-01

    The tests and researches on the development and utilization of atomic energy in national laboratories were begun in 1956, and have accomplished the great role for the advance of the development and utilization of atomic energy in Japan by having produced many valuable results so far. Atomic energy has been utilized not only in the field of nuclear power but also in diverse fields, and in national laboratories, the research for expanding the development and utilization of atomic energy in medicine, agriculture, forestry, fishery, radioactivation analysis and others in addition the basic research on nuclear fusion have been advanced. Further expecting the pervasive effect to general science and technology, the development of integrated research are promoted from the viewpoint of new technical innovation and creative technology. The safety research of nuclear facilities have been carried out to keep them high level on the basis of the yearly program enacted by Nuclear Safety Commission. This is the report No. 33, in which the results of the test and research in the fields of nuclear fusion safety research, food irradiation, cancer countermeasures, agriculture, forestry, fishery, medicine, mining and manufacture, power utilization, construction, radioactivation analysis carried on in fiscal 1992 are summarized. (J.P.N.)

  4. Operating results obtained in a nuclear power plant with a sensor surveillance prototype

    International Nuclear Information System (INIS)

    Jacquot, J.P.; Poujol, A.; Beaubatie, J.; Ciaramitaro, W.

    1983-03-01

    Surveillance methods have been validated and specific equipment have been built to measure the response time of sensors from a nuclear power plant protection channel. The reason of the choice of this parameter is twofold: the sensor response time is representative of the sensor physical status and is also part of the overall channel response time. Two surveillance methods are used: noise analysis (by AR or PSD modeling), and loop current step response (for resistance thermometer detectors only). The methods were validated on test facilities and on nuclear power plants. Two test equipments were built and tested on plants. Results are represented and conclusions are drawn on the feasibility of such methods for sensor surveillance [fr

  5. 2D and 3D core-collapse supernovae simulation results obtained with the CHIMERA code

    Energy Technology Data Exchange (ETDEWEB)

    Bruenn, S W; Marronetti, P; Dirk, C J [Physics Department, Florida Atlantic University, 777 W. Glades Road, Boca Raton, FL 33431-0991 (United States); Mezzacappa, A; Hix, W R [Physics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831-6354 (United States); Blondin, J M [Department of Physics, North Carolina State University, Raleigh, NC 27695-8202 (United States); Messer, O E B [Center for Computational Sciences, Oak Ridge National Laboratory, Oak Ridge, TN 37831-6354 (United States); Yoshida, S, E-mail: bruenn@fau.ed [Max-Planck-Institut fur Gravitationsphysik, Albert Einstein Institut, Golm (Germany)

    2009-07-01

    Much progress in realistic modeling of core-collapse supernovae has occurred recently through the availability of multi-teraflop machines and the increasing sophistication of supernova codes. These improvements are enabling simulations with enough realism that the explosion mechanism, long a mystery, may soon be delineated. We briefly describe the CHIMERA code, a supernova code we have developed to simulate core-collapse supernovae in 1, 2, and 3 spatial dimensions. We then describe the results of an ongoing suite of 2D simulations initiated from a 12, 15, 20, and 25 M{sub o-dot} progenitor. These have all exhibited explosions and are currently in the expanding phase with the shock at between 5,000 and 20,000 km. We also briefly describe an ongoing simulation in 3 spatial dimensions initiated from the 15 M{sub o-dot} progenitor.

  6. THE ANALYSIS OF SEVERAL RESULTS OBTAINED BY ROMANIA IN THE FIELD OF SUSTAINABLE TRANSPORT

    Directory of Open Access Journals (Sweden)

    Perțicaș Diana Claudia

    2015-07-01

    Full Text Available We know that between the transport sector and all other branches of economy there is a strong interdependence link but also between it and the surrounding environment, being one of the most polluting sectors of activity. Transport is considered a primary field in any national economy development context, especially if we take into account its interdependence with other branches of national economy. Developing of transports also includes improving road, rail, river and sea services, as well as air transports. The objectives of the EU aim especially to modernize the transport infrastructures, be them by road, ship or by air, which would result in increasing the speed of freight transport, fluidizing traffic, attracting new foreign investors in various areas, accelerating the renewal of the auto park and decommissioning morally and physically worn vehicles which are extremely pollutant, the revival of maritime transports through Romanian ports, progressive completion of imposed performances through standards and regulations on the transport market, etc. All these objectives have as a main purpose the reducing of energy consumption, reducing transport costs as well as increasing competition in the national transport system.The development of transport has the role of stimulating public transport services and to guarantee a minimum general accessibility to public services for all citizens. Children, the elderly, disabled people or other vulnerable categories of people are not and will not be forgotten, for which certain standards set by the European Union must be respected.The present paper wishes to analyze a part of the results, either positive or negative, in the field of transports, made by our country.

  7. Comparison of different scenarios for the deployment of fast reactors in France. Results obtained with COSI

    International Nuclear Information System (INIS)

    Coquelet-Pascal, Christine; Meyer, Maryan; Girieud, Richard

    2011-01-01

    In the frame of the French Act for waste management, scenarios studies are carried out with the simulation software COSI to compare different options of evolution of the French reactor fleet, possibilities of plutonium recycling, and options of separation and transmutation of minor actinides. The goal of these studies is to evaluate the sustainability of Sodium cooled Fast Reactors (SFR) deployment from plutonium availability viewpoint, as well as the interest of minor actinides transmutation options in SFR and associated impacts (decay heat and toxicity) on cycle facilities and geological storage. Each option has been evaluated separately in dynamic scenarios taking into account the transition between the current nuclear reactor fleet and a generation IV fleet, with the deployment of SFR in replacement of PWR. In this paper, the results of three types of scenarios, in the continuity of the paper of GLOBAL 2009, are discussed: 1 - plutonium recycling in SFR; 2 - plutonium recycling and minor actinides transmutation in SFR; 3 - plutonium recycling and americium transmutation in SFR. MA transmutation in heterogeneous mode (named 'het.') and in homogeneous mode (named 'hom.') are distinguished. By comparison with the previous paper, new scenarios and extended results are added and a global comparison between transmutation performances is done. Scenarios have been optimized to minimize the impacts on fuel cycle: stabilization of plants capacities over 40 years, limitation of minor actinides storage in the case of heterogeneous transmutation, limitation of MA content in the case of homogeneous transmutation. The impact of MA transmutation on decay heat of fresh and spent fuel are also assessed. The selected scenarios bring also elements on the impact of a SFR deployment delayed from 2040 to 2080, with or without MA transmutation, and the impact of an increase in the total power capacity installed by maximizing the SFR share in a symbiotic fleet PWR-SFR. Whatever the

  8. Gravity Changes and Internal Processes: Some Results Obtained from Observations at Three Volcanoes

    Science.gov (United States)

    Jentzsch, Gerhard; Weise, Adelheid; Rey, Carlos; Gerstenecker, Carl

    Temporal gravity changes provide information about mass and/or density variations within and below the volcano edifice. Three active volcanoes have been under investigation; each of them related to a plate boundary: Mayon/Luzon/Philippines, Merapi/Java/Indonesia, and Galeras/Colombia. The observed gravity changes are smaller than previously expected but significant. For the three volcanoes under investigation, and within the observation period, mainly the increase of gravity is observed, ranging from 1,000 nm-2 to 1,600 nms-2. Unexpectedly, the gravity increase is confined to a rather small area with radii of 5 to 8 km around the summit. At Mayon and Merapi the parallel GPS measurements yield no significant elevation changes. This is crucial for the interpretation, as the internal pressure variations do not lead to significant deformation at the surface. Thus the classical Mogi-model for a shallow extending magma reservoir cannot apply. To confine the possible models, the attraction due to changes of groundwater level or soil moisture is estimated along the slope of Merapi exemplarily by 2-D modelling. Mass redistribution or density changes were evaluated within the vent as well as deeper fluid processes to explain the gravity variations; the results are compared to the model incorporating the additional effect of elastic deformation.

  9. Development, calibration and experimental results obtained with an innovative calorimeter (CALMOS) for nuclear heating measurements

    International Nuclear Information System (INIS)

    Carcreff, H.; Cloute-Cazalaa, V.; Salmon, L.

    2011-01-01

    Nuclear heating inside an MTR reactor has to be known in order to be able to control samples temperature during irradiation experiments. An R and D program has been carried out at CEA to design a new type of in-core calorimetric system. This new development, started in 2002, has for main objective to manufacture a calorimeter suitable to monitoring nuclear heating inside the 70 MWth OSIRIS material testing reactor operated by CEA's Nuclear Energy Div. at the Saclay research center. An innovative calorimetric probe, associated to a specific handling system, has been designed to provide access to measurements both along the fissile height and on the upper part of the core, where nuclear heating still remains high. Two mock-ups of the probe were manufactured and tested in 2005 and 2009 in ex-core area of OSIRIS reactor for process validation, while a displacement system has been especially studied to move the probe along a given axial measurement range. This paper deals with the development, tests on preliminary mock-ups and the finalization of the probe. Main modeling and experimental results are presented. Moreover, alternative methods to calibration for nuclear heating rate measurements which are now possible with this new calorimeter are presented and discussed. (authors)

  10. Development, calibration, and experimental results obtained with an innovative calorimeter (CALMOS) for nuclear heating measurements

    International Nuclear Information System (INIS)

    Carcreff, Hubert; Cloute-Cazalaa, Veronique; Salmon, Laurent

    2012-01-01

    Nuclear heating inside an MTR reactor has to be known in order to be able to control samples temperature during irradiation experiments. An R and D program has been carried out at CEA to design a new type of in-core calorimetric system. This new development, started in 2002, has for main objective to manufacture a calorimeter suitable to monitoring nuclear heating inside the 70 MWth OSIRIS material testing reactor operated by CEA's Nuclear Energy Division at the Saclay research center. An innovative calorimetric probe, associated to a specific handling system, has been designed to provide access to measurements both along the fissile height and on the upper part of the core, where nuclear heating still remains high. Two mock-ups of the probe were manufactured and tested in 2005 and 2009 in ex-core area of OSIRIS reactor for process validation, while a displacement system has been especially studied to move the probe along a given axial measurement range. This paper deals with the development, tests on preliminary mock-ups and the finalization of the probe. Main modeling and experimental results are presented. Moreover, alternative methods to calibration for nuclear heating rate measurements which are now possible with this new calorimeter are presented and discussed. (authors)

  11. Preliminary physico-chemical results obtained on water using new data acquisition systems for deep wells

    International Nuclear Information System (INIS)

    Vinson, J.M.; Peyrus, J.C.

    1984-02-01

    Data acquisition systems recently developed in the context of research on deep storage facilities have provided with an initial set of interesting observations for the physico-chemical study of boreholes. It is possible to make correlations between the chemical compositions of water, pH and the nature of the substrate. The sampling done at Auriat with a Gerhardt-Owen probe shows the variability in the composition of water as a function of depth. The variation in calcium content, following that of pH, is particularly notable. Examination of pH measurements is of particular interest. A general gradient correlates exactly with the nature of the substrate. Whereas steel piping has a very alkaline pH, distinct pH values correspond to the two types of granite substrate. In this general gradient, series of disturbances can be seen which correspond perfectly to fracturation zones or large fractures. These most promising preliminary results lead to believe that in situ physico-chemical measurements should be continued and developed with a view to improved evaluation of the safety of deep storage facilities

  12. Latest results of SEE measurements obtained by the STRURED demonstrator ASIC

    Energy Technology Data Exchange (ETDEWEB)

    Candelori, A. [INFN, Section of Padova, Via Marzolo 8, c.a.p. 35131, Padova (Italy); De Robertis, G. [INFN Section of Bari, Via Orabona 4, c.a.p. 70126, Bari (Italy); Gabrielli, A. [Physics Department, University of Bologna, Viale Berti Pichat 6/2, c.a.p. 40127, Bologna (Italy); Mattiazzo, S.; Pantano, D. [INFN, Section of Padova, Via Marzolo 8, c.a.p. 35131, Padova (Italy); Ranieri, A., E-mail: antonio.ranieri@ba.infn.i [INFN Section of Bari, Via Orabona 4, c.a.p. 70126, Bari (Italy); Tessaro, M. [INFN, Section of Padova, Via Marzolo 8, c.a.p. 35131, Padova (Italy)

    2011-01-21

    With the perspective to develop a radiation-tolerant circuit for High Energy Physics (HEP) applications, a test digital ASIC VLSI chip, called STRURED, has been designed and fabricated using a standard-cell library of commercial 130 nm CMOS technology by implementing three different radiation-tolerant architectures (Hamming, Triple Modular Redundancy and Triple Time Redundancy) in order to correct circuit malfunctions induced by the occurrence of Soft Errors (SEs). SEs are one of the main reasons of failures affecting electronic digital circuits operating in harsh radiation environments, such as in experiments performed at HEP colliders or in apparatus to be operated in space. In this paper we present and discuss the latest results of SE cross-section measurements performed using the STRURED digital device, exposed to high energy heavy ions at the SIRAD irradiation facility of the INFN National Laboratories of Legnaro (Padova, Italy). In particular the different behaviors of the input part and the core of the three radiation-tolerant architectures are analyzed in detail.

  13. Simbol-X Hard X-ray Focusing Mirrors: Results Obtained During the Phase A Study

    International Nuclear Information System (INIS)

    Tagliaferri, G.; Basso, S.; Civitani, M.; Conconi, P.; Cotroneo, V.; Pareschi, G.; Spiga, D.; Borghi, G.; Garoli, D.; Mattarello, V.; Orlandi, A.; Valsecchi, G.; Vernani, D.; Burkert, W.; Freyberg, M.; Hartner, G.; Citterio, O.; Gorenstein, P.; Romaine, S.

    2009-01-01

    Simbol-X will push grazing incidence imaging up to 80 keV, providing a strong improvement both in sensitivity and angular resolution compared to all instruments that have operated so far above 10 keV. The superb hard X-ray imaging capability will be guaranteed by a mirror module of 100 electroformed Nickel shells with a multilayer reflecting coating. Here we will describe the technogical development and solutions adopted for the fabrication of the mirror module, that must guarantee an Half Energy Width (HEW) better than 20 arcsec from 0.5 up to 30 keV and a goal of 40 arcsec at 60 keV. During the phase A, terminated at the end of 2008, we have developed three engineering models with two, two and three shells, respectively. The most critical aspects in the development of the Simbol-X mirrors are i) the production of the 100 mandrels with very good surface quality within the timeline of the mission, ii) the replication of shells that must be very thin (a factor of 2 thinner than those of XMM-Newton) and still have very good image quality up to 80 keV, iii) the development of an integration process that allows us to integrate these very thin mirrors maintaining their intrinsic good image quality. The Phase A study has shown that we can fabricate the mandrels with the needed quality and that we have developed a valid integration process. The shells that we have produced so far have a quite good image quality, e.g. HEW < or approx. 30 arcsec at 30 keV, and effective area. However, we still need to make some improvements to reach the requirements. We will briefly present these results and discuss the possible improvements that we will investigate during phase B.

  14. Simbol-X Hard X-ray Focusing Mirrors: Results Obtained During the Phase A Study

    Science.gov (United States)

    Tagliaferri, G.; Basso, S.; Borghi, G.; Burkert, W.; Citterio, O.; Civitani, M.; Conconi, P.; Cotroneo, V.; Freyberg, M.; Garoli, D.; Gorenstein, P.; Hartner, G.; Mattarello, V.; Orlandi, A.; Pareschi, G.; Romaine, S.; Spiga, D.; Valsecchi, G.; Vernani, D.

    2009-05-01

    Simbol-X will push grazing incidence imaging up to 80 keV, providing a strong improvement both in sensitivity and angular resolution compared to all instruments that have operated so far above 10 keV. The superb hard X-ray imaging capability will be guaranteed by a mirror module of 100 electroformed Nickel shells with a multilayer reflecting coating. Here we will describe the technogical development and solutions adopted for the fabrication of the mirror module, that must guarantee an Half Energy Width (HEW) better than 20 arcsec from 0.5 up to 30 keV and a goal of 40 arcsec at 60 keV. During the phase A, terminated at the end of 2008, we have developed three engineering models with two, two and three shells, respectively. The most critical aspects in the development of the Simbol-X mirrors are i) the production of the 100 mandrels with very good surface quality within the timeline of the mission, ii) the replication of shells that must be very thin (a factor of 2 thinner than those of XMM-Newton) and still have very good image quality up to 80 keV, iii) the development of an integration process that allows us to integrate these very thin mirrors maintaining their intrinsic good image quality. The Phase A study has shown that we can fabricate the mandrels with the needed quality and that we have developed a valid integration process. The shells that we have produced so far have a quite good image quality, e.g. HEW <~30 arcsec at 30 keV, and effective area. However, we still need to make some improvements to reach the requirements. We will briefly present these results and discuss the possible improvements that we will investigate during phase B.

  15. The main tasks and obtained results within soil protection working group of the Danube countries

    International Nuclear Information System (INIS)

    Dzatko, M.

    1997-01-01

    In the frame of the Danube Countries Working Community activities was in 1993 constituted independent Soil Protection Working Group (SPWG). Its primary task is to elaborate principles and common soil protection concept in given countries accepted on the level of governments and related authorities, and also to the solution of the solution of the problems on regional levels. Final objective is to implement such concept of soil protection policy, which is able to maintain its quality and productivity potential for next generations also. Based on four years activities coordination could be significance and the SPWG relevance expressed in following topics: (1) Soil pollution and soil degradation, particularly in most pos-communistic countries has been attaining high degree, and in many locations also the threshold of ecological be arability. As reclamation and revitalization of the degraded and polluted soils require long time and considerable financial means, it is not only moral;, even also economically more effective to protect preventively than subsequent reclamation. (2) Main objective of the correct soil protection policy should be its high quality conservation also for the next generations. To this is joined also the protection not only productional, but also non-productional functions, particularly filtrational, transformational and buffering capacibility, including its role and significance, as land and environment. From, in this way considered relationships reality is resulting that the soil protection objectives are not only laws and prohibition approvement, but also active relationships harmonization between the man requirements and soil productivity potential, in order of the sustainable land resources use for the next generations. (3) Based on mentioned realities and relationships we consider the SPWG as an active gremium for elaboration of the the uniform soil protection concepts for governments and responsible organisations that in financial consequence

  16. Implantation of peritoneal catheters by laparotomy: nephrologists obtained similar results to general surgeons

    Directory of Open Access Journals (Sweden)

    Restrepo CA

    2014-10-01

    Full Text Available Cesar A Restrepo, Carlos Alberto Buitrago, Cielo Holguin Division of Nephrology, Department of Health Sciences, Caldas University, Caldas, ColombiaPurpose: To analyze the complications and costs of minilaparotomies performed by a nephrologist (group A compared with conventional laparotomies performed by a surgeon (group B for peritoneal catheter implantation.Setting: Two university hospitals (Santa Sofia and Caldas in Manizales, Caldas, Colombia.Methods: The study included stage 5 chronic kidney disease patients, with indication of renal replacement therapy, who were candidates for peritoneal dialysis and gave informed consent for a peritoneal catheter implant. Minilaparotomies were performed by a nephrologist in a minor surgery room under local anesthesia. Conventional laparotomies were performed by a surgeon in an operating room under general anesthesia.Results: Two nephrologists inserted 157 peritoneal catheters, and seven general surgeons inserted 185 peritoneal catheters. The groups had similar characteristics: the mean age was 55 years, 49.5% were men, and the primary diagnoses were diabetic nephropathy, hypertensive nephropathy, and unknown etiology. The implant was successful for 98.09% of group A and 99.46% of group B. There was no procedure-related mortality. The most frequent complications in the first 30 days postsurgery in group A versus group B, respectively, were: peritonitis (6.37% versus 3.78%, exit-site infection (3.82% versus 2.16%, tunnel infection (0% versus 0.54%, catheter entrapment by omentum (1.27% versus 3.24%, peritoneal effluent spillover (1.91% versus 2.16%, draining failure (4.46% versus 6.49%, hematoma (0% versus 1.08%, catheter migration with kinking (3.18% versus 2.70%, hemoperitoneum (1.27% versus 0%, and hollow viscera accidental puncture (1.91% versus 0.54%. There were no statistically significant differences in the number of complications between groups. In 2013, the cost of a surgeon-implanted peritoneal

  17. Study liquid length penetration results obtained with a direct acting piezo electric injector

    International Nuclear Information System (INIS)

    Payri, Raul; Gimeno, Jaime; Bardi, Michele; Plazas, Alejandro H.

    2013-01-01

    Highlights: ► A direct acting injector capable of controlling needle lift has been used to determine liquid phase penetration. ► The influence of injection pressure, chamber density and chamber temperature have been measured. ► When needle lift is reduced the stabilized liquid length is shortened. ► The relationship between needle lift and liquid length makes needle lift as a new way to control the injection event. - Abstract: A state of the art prototype common rail injector featuring direct control of the needle by means of a piezo stack (direct acting) has been tested. Liquid phase penetration of the sprays in diesel engine-like conditions has been studied via imaging technique in a novel continuous flow test chamber that allows an accurate control on a wide range of thermodynamic conditions (up to 1000 K and 15 MPa). This state of the art injector fitted with a 7-hole nozzle, allows a fully flexible control on the nozzle needle movement, enabling various fuel injection rate typologies. The temporal evolution of the seven sprays has been studied recording movies of the injection event in evaporative conditions via Mie scattering imaging technique and using a high speed camera. The results showed a strong influence of needle position on the stabilized liquid length while the effect of the injection pressure is negligible: the decrease of the needle lift causes a pressure drop in the needle seat and thus a reduction in the effective pressure upstream of the orifices (in the nozzle sac). According to known literature the stabilized liquid-length depends mainly on effective diameter, spray cone-angle and fuel/air properties and does not depend on fuel velocity at the orifice outlet. Therefore, due to small change in the spray cone-angle, higher injection pressures give slightly lower liquid length. However, partial needle lifts has an opposite effect: when needle is partially lifted a dramatic increase of the spray cone-angle and a consequent reduction of

  18. Results of data base management system parameterized performance testing related to GSFC scientific applications

    Science.gov (United States)

    Carchedi, C. H.; Gough, T. L.; Huston, H. A.

    1983-01-01

    The results of a variety of tests designed to demonstrate and evaluate the performance of several commercially available data base management system (DBMS) products compatible with the Digital Equipment Corporation VAX 11/780 computer system are summarized. The tests were performed on the INGRES, ORACLE, and SEED DBMS products employing applications that were similar to scientific applications under development by NASA. The objectives of this testing included determining the strength and weaknesses of the candidate systems, performance trade-offs of various design alternatives and the impact of some installation and environmental (computer related) influences.

  19. NASA Plan for Increasing Access to the Results of Scientific Research

    Science.gov (United States)

    2014-01-01

    This plan is issued in response to the Executive Office of the President's February 22, 2013, Office of Science and Technology Policy (OSTP) Memorandum for the Heads of Executive Departments and Agencies, "Increasing Access to the Results of Federally Funded Scientific Research." Through this memorandum, OSTP directed all agencies with more than $100 million in annual research and development expenditures to prepare a plan for improving the public's access to the results of federally funded research. The National Aeronautics and Space Administration (NASA) invests on the order of $3 billion annually in fundamental and applied research and technology development1 across a broad range of topics, including space and Earth sciences, life and physical sciences, human health, aeronautics, and technology. Promoting the full and open sharing of data with research communities, private industry, academia, and the general public is one of NASA's longstanding core values. For example, NASA's space and suborbital mission personnel routinely process, archive, and distribute their data to researchers around the globe. This plan expands the breadth of NASA's open-access culture to include data and publications for all of the scientific research that the Agency sponsors.

  20. Actions for Professional Development to Enhance Competence in Communicating Scientific Results

    Directory of Open Access Journals (Sweden)

    Alexeis Ruíz-Díaz

    2017-04-01

    Full Text Available The main goal of this research is to propose an action plan for professional development to enhance competence in communicating scientific results in teachers of municipal secondary schools. The research is part of a complementary methodological approach that combines different quantitative and qualitative methods based on specific objectives. The diagnosis was made at the Municipal University Center of Sagua La Grande, with a sample of 25 teachers who are members of the Industrial Engineering career staff at the institution, attached to the Central University “Marta Abreu” of Las Villas, Cuba. Regularities were found from the stage of the initial diagnosis of professional development needs and the level in which the “competence in communicating scientific results” variable was. With this information justifying the purposes of this research, a process was designed following a systemic approach, and the practical result was the proposal of the organization and design of an action plan for development through postgraduate education forms during the implementation phase.

  1. Obligatory course unit! Trainee astronomers learn to communicate their future scientific results

    Science.gov (United States)

    Del Puerto, C.

    2008-06-01

    A scientist must not only do science, but must also know how to communicate it. It is possible that he or she even ends up becoming devoted professionally either to outreach or to teaching. Therefore, the Master's Degree Course in Astrophysics, created by the University of La Laguna (ULL) with the collaboration of the Instituto de Astrofisica de Canarias (IAC), includes in its programme the four-month core course unit Communicating Astronomy: Professional Results and Educational Practice (in Spanish, Comunicación de Resultados Cientificos y Didactica de la Astronomia), that is worth three ECTs. In this poster, I present the results of our experience from the academic year 2006-2007, in which seventeen Master's students, in addition to learning the skills necessary to communicating their results within the scientific community, have also studied the language of popularisation in a practical and fun way through role-playing as science writers and schoolteachers in the classroom.

  2. [Controversies about instrumented surgery and pain relief in degenerative lumbar spine pain. Results of scientific evidence].

    Science.gov (United States)

    Robaina-Padrón, F J

    2007-10-01

    Investigation and development of new techniques for intrumented surgery of the spine is not free of conflicts of interest. The influence of financial forces in the development of new technologies an its immediately application to spine surgery, shows the relationship between the published results and the industry support. Even authors who have defend eagerly fusion techniques, it have been demonstrated that them are very much involved in the revision of new articles to be published and in the approval process of new spinal technologies. When we analyze the published results of spine surgery, we must bear in mind what have been call in the "American Stock and Exchange" as "the bubble of spine surgery". The scientific literature doesn't show clear evidence in the cost-benefit studies of most instrumented surgical interventions of the spine compare with the conservative treatments. It has not been yet demonstrated that fusion surgery and disc replacement are better options than the conservative treatment. It's necessary to point out that at present "there are relationships between the industry and back pain, and there is also an industry of the back pain". Nonetheless, the "market of the spine surgery" is growing up because patients are demanding solutions for their back problems. The tide of scientific evidence seams to go against the spinal fusions in the degenerative disc disease, discogenic pain and inespecific back pain. After decades of advances in this field, the results of spinal fusions are mediocre. New epidemiological studies show that "spinal fusion must be accepted as a non proved or experimental method for the treatment of back pain". The surgical literature on spinal fusion published in the last 20 years following the Cochrane's method establish that: 1- this is at least incomplete, not reliable and careless; 2- the instrumentation seems to slightly increase the fusion rate; 3- the instrumentation doesn't improve the clinical results in general, lacking

  3. The magnetic field investigation on the ARASE (ERG) mission: Data characteristics and initial scientific results

    Science.gov (United States)

    Matsuoka, A.; Teramoto, M.; Nomura, R.; Nose, M.; Fujimoto, A.; Tanaka, Y.; Shinohara, M.; Nagatsuma, T.; Shiokawa, K.; Obana, Y.; Miyoshi, Y.; Takashima, T.; Shinohara, I.

    2017-12-01

    The ARASE (ERG) satellite was successfully launched on December 20 2016. A fluxgate magnetometer (MGF) was built for the ARASE satellite to measure DC and low-frequency magnetic field. The requirements to the magnetic field measurements by ARASE was defined as (1) accuracy of the absolute field intensity is within 5 nT (2) angular accuracy of the field direction is within 1 degree (3) measurement frequency range is from DC to 60Hz or wider. MGF measures the vector magnetic field with the original sampling frequency of 256 Hz. The dynamic range is switched between +/-8000nT and +/- 60000nT according to the background field intensity. The MGF initial checkout was carried on January 10th 2017, when the MGF normal performance and downlinked data were confirmed. The 5-m length MAST for the sensor was deployed on 17th January. The nominal operation of MGF started in March 2017. The MGF data are calibrated based on the results from the ground experiments and in-orbit data analysis. The MGF CDF files are distributed by the ARASE Science Center and available by Space Physics Environment Data Analysis Software (SPEDAS). The acceleration process of the charged particles in the inner magnetosphere is considered to be closely related to the deformation and perturbation of the magnetic field. Accurate measurement of the magnetic field is required to understand the acceleration mechanism of the charged particles, which is one of the major scientific objectives of the ARASE mission. We designed a fluxgate magnetometer which is optimized to investigate following topics; (1) accurate measurement of the background magnetic field - the deformation of the magnetic field and its relationship with the particle acceleration. (2) MHD waves - measurement of the ULF electromagnetic waves of frequencies about 1mHz (Pc4-5), and investigation of the radiation-belt electrons radially diffused by the resonance with the ULF waves. (3) EMIC waves - measurement of the electromagnetic ion

  4. Preliminary results of the first scientific Drilling on Lake Baikal, Buguldeika site, southeastern Siberia

    Science.gov (United States)

    Williams, Douglas F.; Colman, S.; Grachev, M.; Hearn, P.; Horie, Shoji; Kawai, T.; Kuzmin, Mikhail I.; Logachov, N.; Antipin, V.; Bardardinov, A.; Bucharov, A.; Fialkov, V.; Gorigljad, A.; Tomilov, B.; Khakhaev, B.N.; Kochikov, S.; Logachev, N.; Pevzner, L.A.; Karabanov, E.B.; Mats, V.; Baranova, E.; Khlystov, O.; Khrachenko, E.; Shimaraeva, M.; Stolbova, E.; Efremova, S.; Gvozdkov, A.; Kravchinski, A.; Peck, J.; Fileva, T.; Kashik, S.; Khramtsova, T.; Kalashnikova, I.; Rasskazova, T.; Tatarnikova, V.; Yuretich, Richard; Mazilov, V.; Takemura, K.; Bobrov, V.; Gunicheva, T.; Haraguchi, H.; Ito, S.; Kocho, T.; Markova, M.; Pampura, V.; Proidakova, O.; Ishiwatari, R.; Sawatari, H.; Takeuchi, A.; Toyoda, K.; Vorobieva, S.; Ikeda, A.; Marui, A.; Nakamura, T.; Ogura, K.; Ohta, Takeshi; King, J.; Sakai, H.; Yokoyama, T.; Hayashida, A.; Bezrukova, E.; Fowell, S.; Fujii, N.; Letunova, P.; Misharina, V.; Miyoshi, N.; Chernyaeva, G.; Ignatova, I.; Likhoshvai, E.; Granina, L.; Levina, O.; Dolgikh, P.; Lazo, F.; Lutskaia, N.; Orem, W.; Wada, E.; Yamada, K.; Yamada, S.; Callander, E.; Golobokoval, L.; Shanks, W. C. Pat; Dorofeeva, R.; Duchkov, A.

    1997-01-01

    The Baikal Drilling Project (BDP) is a multinational effort to investigate the paleoclimatic history and tectonic evolution of the Baikal sedimentary basin during the Late Neogene. In March 1993 the Baikal drilling system was successfuly deployed from a barge frozen into position over a topographic high, termed the Buguldeika saddle, in the southern basin of Lake Baikal. The BDP-93 scientific team, made up of Russian, American and Japanese scientists, successfully recovered the first long (>100 m) hydraulic piston cores from two holes in 354 m of water. High quality cores of 98 m (Hole 1) and 102 m (Hole 2), representing sedimentation over the last 500,000 years, were collected in 78 mm diameter plastic liners with an average recovery of 72% and 90%, respectively. Magnetic susceptibility logging reveals an excellent hole-to-hole correlation. In this report the scientific team describes the preliminary analytical results from BDP-93 hole 1 cores. Radiocarbon dating by accelerator mass spectrometry provides an accurate chronology for the upper portion of Hole 1. Detailed lithologic characteristics, rock magnetic properties and inorganic element distributions show a significant change to the depositional environment occuring at 50 m subbottom depth, approximately 250,000 BP. This change may be due to uplift and rotation of the horst block in the Buguldeika saddle. The sedimentary section above 50 m is pelitic with varve-like laminae, whereas the section below 50 m contains a high proportion of sand and gravel horizons often organized into turbidite sequences. Accordingly, high resolution seismic records reveal a change in sonic velocity at this depth. It is inferred that sedimentation prior to 250 ka BP was from the west via the Buguldeika river system. After 250 ka BP the Buguldeika saddle reflects an increase in hemipelagic sediments admixed with fine-grained material from the Selenga River drainage basin, east of Lake Baikal. Variations in the spore

  5. Pipeline inspection - failures selection and results obtained; Inspeccion interna de ductos - seleccion de fallas y resultados obtenidos

    Energy Technology Data Exchange (ETDEWEB)

    Motylicki, Juan Enrique [Oleoductos del Valle S.A. (OLDEVAL S.A.), (Argentina)

    2003-07-01

    The main objective of the pipelines maintenance is to assure the integrity of them in order to have a reliable operation and with an acceptable level of risk that minimizes the impact to people, to the environment and the business. The objective of this work is to expose the experiences obtained before by Oldelval and after the passages of the intelligent pig, carried out in the years 1999/2000. In the same one they will be described: How the flaws were selected to verify / to repair. Results obtained in digs. Laboratory studies to determine like they affect to the integrity of the pipeline, the different types of opposing plane defects. Conclusions. (author)

  6. Performance and scientific results of the BeppoSAX Gamma-Ray Burst Monitor

    International Nuclear Information System (INIS)

    Feroci, M.; Costa, E.; Cinti, M. N.; Frontera, F.; Dal Fiume, D.; Nicastro, L.; Orlandini, M.; Palazzi, E.; Amati, L.; Zavattini, G.; Coletta, A.

    1998-01-01

    The Italian-Dutch satellite for X-ray Astronomy BeppoSAX is successfully operating on a 600 km equatorial orbit since May 1996. We present here the in-flight performance of the Gamma Ray Burst Monitor (GRBM) experiment during its first year of operation. The GRBM is performing very well, providing an amount of data on GRBs, some of which confirmed by other experiments onboard satellites. It also joined the 3rd Interplanetary Network as a new near-earth node. Important results have been obtained for GRBs (e.g. GRB970228) simultaneously detected in the Wide Field Cameras onboard the same satellite

  7. Scientific results of the Second Gas Hydrate Drilling Expedition in the Ulleung Basin (UBGH2)

    Science.gov (United States)

    Ryu, Byong-Jae; Collett, Timothy S.; Riedel, Michael; Kim, Gil-Young; Chun, Jong-Hwa; Bahk, Jang-Jun; Lee, Joo Yong; Kim, Ji-Hoon; Yoo, Dong-Geun

    2013-01-01

    As a part of Korean National Gas Hydrate Program, the Second Ulleung Basin Gas Hydrate Drilling Expedition (UBGH2) was conducted from 9 July to 30 September, 2010 in the Ulleung Basin, East Sea, offshore Korea using the D/V Fugro Synergy. The UBGH2 was performed to understand the distribution of gas hydrates as required for a resource assessment and to find potential candidate sites suitable for a future offshore production test, especially targeting gas hydrate-bearing sand bodies in the basin. The UBGH2 sites were distributed across most of the basin and were selected to target mainly sand-rich turbidite deposits. The 84-day long expedition consisted of two phases. The first phase included logging-while-drilling/measurements-while-drilling (LWD/MWD) operations at 13 sites. During the second phase, sediment cores were collected from 18 holes at 10 of the 13 LWD/MWD sites. Wireline logging (WL) and vertical seismic profile (VSP) data were also acquired after coring operations at two of these 10 sites. In addition, seafloor visual observation, methane sensing, as well as push-coring and sampling using a Remotely Operated Vehicle (ROV) were conducted during both phases of the expedition. Recovered gas hydrates occurred either as pore-filling medium associated with discrete turbidite sand layers, or as fracture-filling veins and nodules in muddy sediments. Gas analyses indicated that the methane within the sampled gas hydrates is primarily of biogenic origin. This paper provides a summary of the operational and scientific results of the UBGH2 expedition as described in 24 papers that make up this special issue of the Journal of Marine and Petroleum Geology.

  8. SMART-1 technology, scientific results and heritage for future space missions

    Science.gov (United States)

    Foing, B. H.; Racca, G.; Marini, A.; Koschny, D.; Frew, D.; Grieger, B.; Camino-Ramos, O.; Josset, J. L.; Grande, M.; Smart-1 Science; Technology Working Team

    2018-02-01

    ESA's SMART-1 mission to the Moon achieved record firsts such as: 1) first Small Mission for Advanced Research and Technology; with spacecraft built and integrated in 2.5 years and launched 3.5 years after mission approval; 2) first mission leaving the Earth orbit using solar power alone; 3) most fuel effective mission (60 L of Xenon) and longest travel (13 months) to the Moon!; 4) first ESA mission reaching the Moon and first European views of lunar poles; 5) first European demonstration of a wide range of new technologies: Li-Ion modular battery, deep-space communications in X- and Ka-bands, and autonomous positioning for navigation; 6) first lunar demonstration of an infrared spectrometer and of a Swept Charge Detector Lunar X-ray fluorescence spectrometer; 7) first ESA mission with opportunity for lunar science, elemental geochemistry, surface mineralogy mapping, surface geology and precursor studies for exploration; 8) first controlled impact landing on the Moon with real time observations campaign; 9) first mission supporting goals of the International Lunar Exploration Working Group (ILEWG) in technical and scientific exchange, international collaboration, public and youth engagement; 10) first mission preparing the ground for ESA collaboration in Chandrayaan-1, Chang' E1 and future international lunar exploration. We review SMART-1 highlights and new results that are relevant to the preparation for future lunar exploration. The technology and methods had impact on space research and applications. Recent SMART-1 results are relevant to topics on: 1) the study of properties of the lunar dust, 2) impact craters and ejecta, 3) the study of illumination, 4) radio observations and science from the Moon, 5) support to future missions, 6) identifying and characterising sites for exploration and exploitation. On these respective topics, we discuss recent SMART-1 results and challenges. We also discuss the use of SMART-1 publications library. The SMART-1 archive

  9. Pregnancy does not affect HIV incidence test results obtained using the BED capture enzyme immunoassay or an antibody avidity assay.

    Directory of Open Access Journals (Sweden)

    Oliver Laeyendecker

    2010-10-01

    Full Text Available Accurate incidence estimates are needed for surveillance of the HIV epidemic. HIV surveillance occurs at maternal-child health clinics, but it is not known if pregnancy affects HIV incidence testing.We used the BED capture immunoassay (BED and an antibody avidity assay to test longitudinal samples from 51 HIV-infected Ugandan women infected with subtype A, C, D and intersubtype recombinant HIV who were enrolled in the HIVNET 012 trial (37 baseline samples collected near the time of delivery and 135 follow-up samples collected 3, 4 or 5 years later. Nineteen of 51 women were also pregnant at the time of one or more of the follow-up visits. The BED assay was performed according to the manufacturer's instructions. The avidity assay was performed using a Genetic Systems HIV-1/HIV-2 + O EIA using 0.1M diethylamine as the chaotropic agent.During the HIVNET 012 follow-up study, there was no difference in normalized optical density values (OD-n obtained with the BED assay or in the avidity test results (% when women were pregnant (n = 20 results compared to those obtained when women were not pregnant (n = 115; for BED: p = 0.9, generalized estimating equations model; for avidity: p = 0.7, Wilcoxon rank sum. In addition, BED and avidity results were almost exactly the same in longitudinal samples from the 18 women who were pregnant at only one study visit during the follow-up study (p = 0.6, paired t-test.These results from 51 Ugandan women suggest that any changes in the antibody response to HIV infection that occur during pregnancy are not sufficient to alter results obtained with the BED and avidity assays. Confirmation with larger studies and with other HIV subtypes is needed.

  10. Method of forecasting pollutant transfer in an aquifer initial results obtained in a sandy medium (Barp site, Gironde)

    International Nuclear Information System (INIS)

    Madoz-Escande, C.; Peyrus, J.-C.

    1979-01-01

    Hydrogeological studies are undertaken in the context of the radiological safety of nuclear plants to forecast consequences of accidental releases of radioactive pollutants into an aquifer (transfer time, concentration at points of emergence). This quantitative forecast is obtained with the aid of a mathematical model with sequential emission. This requires a knowledge of the physical parameters of the aquifer and of the behavior of the pollutant in relation to the water-bearing medium. The physical parameters of a saturated porous medium are presented with the aid of radioactive tracer tests on a model and also in the field. The initial results obtained in a sandy medium are presented. In view of the difficulty of extrapolating to field conditions the conclusions of tests on models, it was necessary to set up a mobile laboratory with which in situ studies could be undertaken. The behavior of the pollutant in relation to the water-bearing medium is the subject of preliminary laboratory research on the laws of adsorption under different pH and temperature conditions. The numerical results obtained call for confirmation in the field. A description is given of a method which should enable the distribution coefficients to be evaluated in situ

  11. Assessment of the French environment radiological status in 2009. Synthesis of the results obtained by the IRSN survey networks

    International Nuclear Information System (INIS)

    2009-01-01

    After a brief recall of the IRSN's missions, this report describes why and how radioactivity is controlled in France. It presents the national network for environment radioactivity measurements, and indicates the objectives of this radiological survey. It comments the status and levels of the natural and artificial radioactivity in France, discusses the results of the territory general survey (atmosphere, inland, coast, regions), the results of fuel cycle related sites (nuclear sites, old mining sites, front end industries, electricity production plants, back end industries, waste storage sites), the results concerning the nuclear medicine radioactive releases, the results obtained during selective expertises, and discusses the assessment of the exposure of the French population to ionizing radiations. It finally indicates how those data are published

  12. New dynamics information from experimental results obtained in d-Au collisions at RHIC-BNL energies

    International Nuclear Information System (INIS)

    Jipa, Alexandru

    2004-01-01

    During the last runs d-Au collisions at √s NN = 200 GeV have been investigated at RHIC-BNL using the BRAHMS Experiment. Some interesting experimental results on charged particle multiplicities, rapidity distributions, transverse momentum spectra, antiparticle to particle ratios, participant spectator evolution have been obtained. In this work the most interesting results are presented for different rapidity and collision centrality ranges. Taking into account the importance of the collision geometry and collision symmetry in the collision dynamics, comparisons with the similar experimental results obtained in Au-Au collisions have been done. New interesting results can be reported. The most significant are related to the evolution of the nuclear modification factor with rapidity and collision centrality. The high transverse momentum suppression and the behaviours in different rapidity and centrality ranges suggest strong initial state effects. These effects could be related to the gluonic structure of the colliding nuclei. Some insights on the Color Glass Condensate formation are possible. (author)

  13. Matching the results of a theoretical model with failure rates obtained from a population of non-nuclear pressure vessels

    International Nuclear Information System (INIS)

    Harrop, L.P.

    1982-02-01

    Failure rates for non-nuclear pressure vessel populations are often regarded as showing a decrease with time. Empirical evidence can be cited which supports this view. On the other hand theoretical predictions of PWR type reactor pressure vessel failure rates have shown an increasing failure rate with time. It is shown that these two situations are not necessarily incompatible. If adjustments are made to the input data of the theoretical model to treat a non-nuclear pressure vessel population, the model can produce a failure rate which decreases with time. These adjustments are explained and the results obtained are shown. (author)

  14. Aero thermal test results obtained on the n. C 5 EL 4 Cluster in the atmospheric pressure cell

    International Nuclear Information System (INIS)

    Gasc, B.

    1964-01-01

    In the framework of thermal studies on the EL-4 cluster, the full-scale tests at atmospheric pressure are designed to permit measurement of local values of the wall temperature, of the velocity and of the temperature in the fluid. The experimental results, obtained with the help of an original measuring apparatus, make it possible to follow the changes in these values along the cluster and to predict in much detail the in-pile thermal behaviour. In particular it is shown that changes in the wall temperature along the cluster are greatly influenced by disruption of the flow caused by grids and supports. (author) [fr

  15. Comparison between dosimeter films and electronic dosimeters results obtained in F-18 production practices at IEN/CNEN

    International Nuclear Information System (INIS)

    Paulo, Osvaldir; Carlos, Luiz R.J.; Mendes, Milton

    2008-01-01

    Full text: The aim of the present work is the comparison of the dose rates values obtained from dosimeter films with the values obtained from electronic dosimeters used by radiological protection technician involved in practices with fluorine-18 production in CV-28 cyclotron at IEN/CNEN. The motivation for this work was the increase on the demand of this radiopharmaceutical. Nowadays there is an increase demand on the number of clinics and hospitals which had started to use the technique of radiodiagnostic using positron-emission tomography (PET). Therefore, the produced radionuclide activities (physics quantity) and also the complexity of the practices of radiological protection in the areas of that facility had increased a lot. The conventional statistical methods will be used to evaluate the results obtained in the analysis of the data obtained in the reading of the dosimeters. This comparative method is however a first step to taking decisions regarding radiological protection service. Therefore that the radiometric surveys of routine are taken in consideration, as well as the information from the technician of radiological protection that is working in those areas. All this data will give support to improve and implement methods and practices on the accelerators' facilities. In addition, the use of these electronic dosimeters will makes possible the technician read these dose rates received immediately during the practices and use these information you make decisions. In case of dose rates values to present above the expected the practice will be ploughed. Another point to be considered is that this work will propitiate the future updates of the procedures designated to those practices and to conduct at the radiological protection optimization. (author)

  16. Results of the activities of the Scientific and Technical Coordination Council for Radiation Technique and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Sille, A K [Gosudarstvennyj Komitet po Ispol' zovaniyu Atomnoj Ehnergii SSSR, Moscow

    1977-03-01

    It is reported on the activities of the Scientific and Technical Coordination Council for Radiation Technique and Technology (STCC-RTT) of the CMEA Permanent Commission for the Peaceful Uses of Atomic Energy according to the programme 1971 to 1975. The STCC-RTT is concerned with technical applications such as radiation sterilization, food irradiation, radiation-induced chemical processes etc. The main tasks which have to be solved within the period from 1976 to 1980 are outlined.

  17. Potential theory for stationary Schrödinger operators: a survey of results obtained with non-probabilistic methods

    Directory of Open Access Journals (Sweden)

    Marco Bramanti

    1992-05-01

    Full Text Available In this paper we deal with a uniformly elliptic operator of the kind: Lu  Au + Vu, where the principal part A is in divergence form, and V is a function assumed in a “Kato class”. This operator has been studied in different contexts, especially using probabilistic techniques. The aim of the present work is to give a unified and simplified presentation of the results obtained with non probabilistic methods for the operator L on a bounded Lipschitz domain. These results regard: continuity of the solutions of Lu=0; Harnack inequality; estimates on the Green's function and L-harmonic measure; boundary behavior of positive solutions of Lu=0, in particular a “Fatou's theorem”.

  18. Analysis of results obtained with different cutting techniques and associated filtration systems for the dismantling of radioactive metallic components

    International Nuclear Information System (INIS)

    Bach, F.W.; Steiner, H.; Schreck, G.

    1993-01-01

    The present joint study performed by the Commissariat a l'energie atomique and the Universitaet Hannover and coordinated by the Commission of the European Communities was intended to analyse the results generated in a number of research contracts concerned with cutting tests in air and underwater, with consideration of the prevailing working conditions. The analysis has led to a large database, giving broadly-assessed information for the dismantling of radioactive components. The range of study was enlarged, where possible, to include recently obtained results outside the present research programme, consideration also being given to supplementary cutting tools and filtration systems not covered by the present programme. Data was concentrated in structured information packages on practical experience available for a series of cutting tools and filters. These were introduced into a computerized user-friendly databank, to be considered as a first-stage development, which should be continuously updated and possibly oriented in the future to an expert system

  19. [Reading behavior and preferences regarding subscriptions to scientific journals : Results of a survey of members of the German Society for General and Visceral Surgery].

    Science.gov (United States)

    Ronellenfitsch, U; Klinger, C; Buhr, H J; Post, S

    2015-11-01

    The purpose of surgical literature is to publish the latest study results and to provide continuing medical education to readers. For optimal allocation of resources, institutional subscribers, professional societies and scientific publishers require structured data on reading and subscription preferences of potential readers of surgical literature. To obtain representative data on the preferences of German general and visceral surgeons regarding reading of and subscription to scientific journals. All members of the German Society for General and Visceral Surgery (DGAV) were invited to participate in a web-based survey. Questions were asked on the affiliation and position of the member, individual journal subscriptions, institutional access to scientific journals, preferences regarding electronic or print articles and special subscriptions for society members. Answers were descriptively analyzed. A total of 630 out of 4091 (15 %) members participated in the survey and 73 % of the respondents had at least 1 individual subscription to a scientific journal. The most frequently subscribed journal was Der Chirurg (47 % of respondents). The institutional access to journals was deemed insufficient by 48 % of respondents, predominantly in primary care hospitals and outpatient clinics. Almost half of the respondents gave sufficient importance to reading printed versions of articles for which they would pay extra fees. A group subscription for society members was perceived as advantageous as long as no relevant extra costs were incurred. This structured survey among members of the DGAV provides data on preferences regarding reading of and subscription to scientific journals. Individual subscriptions to journals are still common, possibly due to suboptimal institutional access particularly at smaller non-academic institutions. In an age of online publications it seems surprising that many respondents place a high value on printed versions. The results are relevant for

  20. Determination of averaged axisymmetric flow surfaces according to results obtained by numerical simulation of flow in turbomachinery

    Directory of Open Access Journals (Sweden)

    Bogdanović-Jovanović Jasmina B.

    2012-01-01

    Full Text Available In the increasing need for energy saving worldwide, the designing process of turbomachinery, as an essential part of thermal and hydroenergy systems, goes in the direction of enlarging efficiency. Therefore, the optimization of turbomachinery designing strongly affects the energy efficiency of the entire system. In the designing process of turbomachinery blade profiling, the model of axisymmetric fluid flows is commonly used in technical practice, even though this model suits only the profile cascades with infinite number of infinitely thin blades. The actual flow in turbomachinery profile cascades is not axisymmetric, and it can be fictively derived into the axisymmetric flow by averaging flow parameters in the blade passages according to the circular coordinate. Using numerical simulations of flow in turbomachinery runners, its operating parameters can be preliminarily determined. Furthermore, using the numerically obtained flow parameters in the blade passages, averaged axisymmetric flow surfaces in blade profile cascades can also be determined. The method of determination of averaged flow parameters and averaged meridian streamlines is presented in this paper, using the integral continuity equation for averaged flow parameters. With thus obtained results, every designer can be able to compare the obtained averaged flow surfaces with axisymmetric flow surfaces, as well as the specific work of elementary stages, which are used in the procedure of blade designing. Numerical simulations of flow in an exemplary axial flow pump, used as a part of the thermal power plant cooling system, were performed using Ansys CFX. [Projekat Ministarstva nauke Republike Srbije, br. TR33040: Revitalization of existing and designing new micro and mini hydropower plants (from 100 kW to 1000 kW in the territory of South and Southeast Serbia

  1. Biodiversity of a wreck from the Belgian Continental Shelf: monitoring using scientific diving: preliminary results

    OpenAIRE

    Massin, Cl.; Norro, A.; Mallefet, J.

    2002-01-01

    Scientific diving from aboard the r/v Belgica has been employed to carry out a preliminary study of the macrofauna living on a wreck (the Birkenfels) located on the Belgian Continental Shelf (BCS). The study revealed an extremely rich sessile and slow moving fauna (at least 40 species), 3 jellyfish species and 8 fish species. The presence of at least 51 species represents a biodiversity of macrofauna on the wreck that is much higher than that found in nearly all known surrounding soft bottorn...

  2. Edaphic macrofauna as biological indicator of the conservation/disturbance status of soil. Results obtained in Cuba

    International Nuclear Information System (INIS)

    Cabrera, Grisel

    2012-01-01

    In order to predict the degradation status of a soil, a group of variables comprising its physical, chemical and/or biological properties is used. Macrofauna, which includes soil invertebrates higher than 2 mm of diameter, is a biological component that can be used for such purpose. Its taxonomic richness as well as its density, biomass and functional composition change depending on the effect of diverse land uses and managements. This review reaffirms that the macrofauna characteristics and the results obtained, mainly in Cuba, about its variation in ecosystems with different anthropization levels, support the potential use of this fauna as biological indicator of the soil's conservation status. Future studies should consider a lower taxonomic level in the identification of macrofauna, and relate its taxonomic and functional composition to the climate and pedological factors. (author)

  3. A Polar Rover for Large-Scale Scientific Surveys: Design, Implementation and Field Test Results

    Directory of Open Access Journals (Sweden)

    Yuqing He

    2015-10-01

    Full Text Available Exploration of polar regions is of great importance to scientific research. Unfortunately, due to the harsh environment, most of the regions on the Antarctic continent are still unreachable for humankind. Therefore, in 2011, the Chinese National Antarctic Research Expedition (CHINARE launched a project to design a rover to conduct large-scale scientific surveys on the Antarctic. The main challenges for the rover are twofold: one is the mobility, i.e., how to make a rover that could survive the harsh environment and safely move on the uneven, icy and snowy terrain; the other is the autonomy, in that the robot should be able to move at a relatively high speed with little or no human intervention so that it can explore a large region in a limit time interval under the communication constraints. In this paper, the corresponding techniques, especially the polar rover's design and autonomous navigation algorithms, are introduced in detail. Subsequently, an experimental report of the fields tests on the Antarctic is given to show some preliminary evaluation of the rover. Finally, experiences and existing challenging problems are summarized.

  4. First In-Core Measurement Results Obtained with the Innovative Mobile Calorimeter CALMOS inside the OSIRIS Material Testing Reactor

    International Nuclear Information System (INIS)

    Carcreff, Hubert; Salmon, Laurent; Courtaux, Cedric

    2013-06-01

    Nuclear heating rate inside an MTR has to be known in order to design and to run irradiation experiments which have to fulfill target temperature constraints. This measurement is usually carried out by calorimetry [1, 2]. An innovative calorimetric system, CALMOS, has been studied and built in 2011 for the 70 MWth OSIRIS reactor operated by CEA. Thanks to a new calorimetric probe, associated to a specific displacement system, it provides measurements along the fissile height and above the core. The development of the calorimetric probe required the manufacturing and the irradiation of mock-ups in the ex-core area, where nuclear heating rate does not exceed 2 W.g -1 . The calorimeter working mode, the different measurement procedures allowed with such a new probe and main modeling and experimental results have been already presented [3, 4]. In this paper, we present the first results obtained during several measurement campaigns carried out in 2012 and 2013 inside the OSIRIS core with the final device. For the first time, this new experimental measurement system was operated in nominal in-core thermo hydraulic conditions with nominal neutron and gamma fluxes (up to 6 W.g -1 ) in several experimental locations. After a brief presentation of the displacement system specificities, first nuclear heating distributions are presented and discussed. Experimental data were also used to upgrade the Finite Element model of the calorimeter in order to match measured temperatures with calculated ones. This model allowed to estimate a Kc correction factor which takes into account small nonlinearities when the heating rate is deduced from the calibration method. A comparison is made between nuclear heating rates determined from the probe calibration and from the zero method. In addition, an evaluation of the global uncertainty associated to the measurements is detailed. Finally, a global comparison is made with available measurements obtained from previous calorimeters. (authors)

  5. First in-core measurement results obtained with the innovative mobile calorimeter CALMOS inside the OSIRIS material testing reactor

    International Nuclear Information System (INIS)

    Carcreff, Hubert; Salmon, Laurent; Courtaux, Cedric

    2014-01-01

    Nuclear heating rate inside an MTR has to be known in order to design and to run irradiation experiments which have to fulfill target temperature constraints. This measurement is usually carried out by calorimetry. An innovative calorimetric system, CALMOS, has been studied and built in 2011 for the 70 MWth OSIRIS reactor operated by CEA. Thanks to a new calorimetric probe, associated to a specific displacement system, it provides measurements along the fissile height and above the core. Development of the calorimetric probe required manufacturing and irradiation of mock-ups in the ex-core area, where nuclear heating rate does not exceed 2 W.g -1 . The calorimeter working mode, the different measurement procedures, main modeling and ex-core experimental results have been already presented in previous papers. In this paper, we present in-core results obtained from 2011 to 2013 with the final device. For the first time, this new experimental measurement system was operated in several experimental locations, with nominal in-core thermal hydraulic conditions, nominal neutron flux and nuclear heating rate up to 6 W.g -1 (in graphite). After a brief presentation of the displacement system specificities, first nuclear heating distributions are presented and discussed. The Finite Element model of the calorimeter was upgraded in order to match calculated temperatures with measured ones. This 'validated' model allowed to estimate a Kc factor which tends to correct small nonlinearities when heating rate is calculated from the 'calibration method'. A comparison is made between nuclear heating rates determined from 'calibration' and 'zero methods'. In addition, an evaluation of the global uncertainty associated to the measurements is detailed. Finally, a comparison is made with available measurements obtained from previous calorimeters. (authors)

  6. Standardization of a fluconazole bioassay and correlation of results with those obtained by high-pressure liquid chromatography.

    Science.gov (United States)

    Rex, J H; Hanson, L H; Amantea, M A; Stevens, D A; Bennett, J E

    1991-01-01

    An improved bioassay for fluconazole was developed. This assay is sensitive in the clinically relevant range (2 to 40 micrograms/ml) and analyzes plasma, serum, and cerebrospinal fluid specimens; bioassay results correlate with results obtained by high-pressure liquid chromatography (HPLC). Bioassay and HPLC analyses of spiked plasma, serum, and cerebrospinal fluid samples (run as unknowns) gave good agreement with expected values. Analysis of specimens from patients gave equivalent results by both HPLC and bioassay. HPLC had a lower within-run coefficient of variation (less than 2.5% for HPLC versus less than 11% for bioassay) and a lower between-run coefficient of variation (less than 5% versus less than 12% for bioassay) and was more sensitive (lower limit of detection, 0.1 micrograms/ml [versus 2 micrograms/ml for bioassay]). The bioassay is, however, sufficiently accurate and sensitive for clinical specimens, and its relative simplicity, low sample volume requirement, and low equipment cost should make it the technique of choice for analysis of routine clinical specimens. PMID:1854166

  7. Prenatal cytogenetic diagnosis in Spain: analysis and evaluation of the results obtained from amniotic fluid samples during the last decade.

    Science.gov (United States)

    Mademont-Soler, Irene; Morales, Carme; Clusellas, Núria; Soler, Anna; Sánchez, Aurora

    2011-08-01

    Chromosome abnormalities are one of the main causes of congenital defects, and establishing their frequency according to the different clinical indications for invasive procedure during pregnancy is especially important for genetic counselling. We analyzed the results of 29,883 amniotic fluid samples referred to our laboratory for cytogenetic studies from 1998 to 2009, which constitutes the largest series of cytogenetic analysis performed on amniotic fluid samples in Spain. The number of samples received tended to increase from 1998 to 2005, but after 2005 it decreased substantially. Cytogenetic results were obtained in 99.5% of the samples, and the detected incidence of chromosome abnormalities was 2.9%. Of these, 48.1% consisted of classical autosomal aneuploidies, trisomy 21 being the most frequent one. The main clinical indications for amniocentesis were positive prenatal screening and advanced maternal age, but referral reasons with highest positive predictive values were, excluding parental chromosome rearrangement, increased nuchal translucency (9.2%) and ultrasound abnormalities (6.6%). In conclusion, performing the karyotype on amniotic fluid samples is a good method for the detection of chromosome abnormalities during pregnancy. The number of cytogenetic studies on amniotic fluid has now decreased, however, due to the implementation of first trimester prenatal screening for the detection of Down syndrome, which allows karyotyping on chorionic villus samples. Our results also show that both ultrasound abnormalities and increased nuchal translucency are excellent clinical indicators for fetal chromosome abnormality. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  8. Containment Evaluation under Severe Accidents (CESA): synthesis of the predictive calculations and analysis of the first experimental results obtained on the Civaux mock-up

    International Nuclear Information System (INIS)

    Granger, L.; Rieg, C.Y.; Touret, J.P.; Fleury, F.; Nahas, G.; Danisch, R.; Brusa, L.; Millard, A.; Laborderie, C.; Ulm, F.; Contri, P.; Schimmelpfennig, K.; Barre, F.; Firnhaber, M.; Gauvain, J; Coulon, N.; Dutton, L.M.C.; Tuson, A.

    2001-01-01

    In 1996, EDF decided to build a containment model at the scale 1:3, the MAEVA mock-up, in order to check and study the behaviour of a pre-stressed concrete containment vessel without a liner in terms of mechanical strength and leaktightness, for loadings corresponding to its design and beyond design conditions. In parallel with the construction and testing of the mock-up, a cost-shared R and D action supported by the European Union, the CESA project, is dealing with quantification of leak rates through concrete cracks and porosity, predictive calculations of the behaviour of the mock-up and analysis of the experimental results. In this paper, we propose a synthesis of the main theoretical and experimental results, obtained after 2.5 years. It should however be noted that, due to some unexpected delays in the experimental programme, quite natural with such a huge and unique experimental set-up, only the design-basis accident sequences, already performed, have been reported in this paper. The first results are nevertheless very interesting, both from a scientific and nuclear utility point of view

  9. Presentations of scientific research results as a strategy to increase the interest of students in physiology

    Directory of Open Access Journals (Sweden)

    Caroline Dalla Colletta Altermann

    2016-06-01

    Full Text Available In the search for strategies to arouse the interest of undergraduate students in science, it was proposed the project "Colloquiums in Physiology" in order to disseminate and discuss scientific discoveries and improve the students’ interest in Physiology. This work aimed to verify the perception of participants about the impact of this activity. The activity included lectures throughout the semester and at the end of each lecture, a questionnaire was applied to listeners. Among the 171 students who answered the questionnaire, 81% (n=139 considers that this proposal increased their interest in physiology, 96% (n=164 believes that it is an important activity and achieved its goal of promote science disclosure, and 83% (n=142 stated that the project promotes interaction between research, teaching and outreach activities. Thus, it highlights the importance of this type of event for the academic formation.

  10. Deutsches Krebsforschungszentrum Heidelberg (DKFZ). Report on scientific results 1998/1999

    International Nuclear Information System (INIS)

    Metzler, H.

    2000-01-01

    The Deutsches Krebsforschungszentrum Heidelberg (DKFZ, German Cancer Research Center) publishes alternating every year the 'Wissenschaftlicher Ergebnisbericht' (in German) and the 'Research Report' (in English). Both volumes are reports on the present state of research activities of the DKFZ as a National Research Center to the funding federal and state authorities (Federal Republic of Germany, Land (state) Baden-Wuerttemberg). Furthermore, they shall inform colleagues and the scientifically interested public. Both reports are structured according to the center's eight research programs. The next Research Report will be published in 2001. In Germany a new orthography has been accepted. Some authors used the new form others the traditional one. The orthography was not standardized. (orig.) [de

  11. Evaluation of the CDTN's cementation facility using the results obtained in two different sizes: laboratory and facility

    International Nuclear Information System (INIS)

    Haucz, Maria Judite A.; Calabria, Jaqueline A. Almeida; Tello, Cledola Cassia O.; Candido, Francisco Donizete; Seles, Sandro Rogerio Novaes

    2011-01-01

    At CDTN R and D activities generate low-level radioactive wastes, among them the aqueous liquid ones, which need special attention due to their volumes. The usual treatment for these wastes is the volume reduction process using chemicals in order to change the radionuclides of the waste to an insoluble form. The resultant sludge is incorporated into cement in 200-liter drums using an in-line batch mixing system (CDTN Cementation Facility). The process parameters and solidified product quality are evaluated at the Cementation Laboratory (LABCIM), where tests are carried out to determine the viscosity, set time and density of the paste. In addition of the visual examination, compressive strength test and density are also established in the solidified product. In the cementation facility some pastes are also prepared for the immobilization of non-compactable waste, such as dump, scrap metal, wood, and other ones. This paper aims to present the study comparing the results of tests done in the pastes and products prepared in LABCIM and the ones obtained in CDTN's cementation facility, in order to check the efficiency of the cementation system. (author)

  12. Evaluation of the CDTN cementation facility using the results obtained in two different sizes: laboratory and facility

    International Nuclear Information System (INIS)

    Haucz, Maria Judite A.; Calabria, Jaqueline A. Almeida; Tello, Cledola Cassia O.; Candido, Francisco Donizete; Seles, Sandro Rogerio Novaes

    2011-01-01

    At CDTN R and D activities generate low-level radioactive wastes, among them the aqueous liquid ones, which need special attention due to their volumes. The usual treatment for these wastes is the volume reduction process using chemicals in order to change the radionuclides of the waste to an insoluble form. The resultant sludge is incorporated into cement in 200-liter drums using an in-line batch mixing system (CDTN Cementation Facility). The process parameters and solidified product quality are evaluated at the Cementation Laboratory (LABCIM), where tests are carried out to determine the viscosity, set time and density of the paste. In addition of the visual examination, compressive strength test and density are also established in the solidified product. In the cementation facility some pastes are also prepared for the immobilization of non-compactable waste, such as dump, scrap metal, wood, and other ones. This paper aims to present the study comparing the results of tests done in the pastes and products prepared in LABCIM and the ones obtained in CDTN's cementation facility, in order to check the efficiency of the cementation system. (author)

  13. Decontamination in preparation for dismantlement - AREVA's chemical decontamination technologies, projects performed and results obtained in the period 2011-2016

    International Nuclear Information System (INIS)

    Topf, C.; Sempere Belda, L.

    2017-01-01

    As a consequence of the nuclear phase-out decreed by the German government, several nuclear power plants in the country have already ceased operation. The remaining ones will cease operation by 2022. This has turned Germany into one of the most active regions worldwide in the field of nuclear decommissioning, with new and emerging technologies being deployed on the field, and already preexisting technologies being put to the test, optimized and developed into full maturity. The chemistry services division of AREVA GmbH has already performed 5 Full System Decontaminations (FSD) in preparation for decommissioning in this period - three in PWRs and two in BWRs - along with other international projects of relevance for decommissioning operations. During a FSD, the complete primary circuit of a nuclear power plant including auxiliary systems is subject to a chemical treatment; designed to remove radioactive matter accumulated onto system surfaces during operation. Through the effective removal of this radioactive accumulations contact dose rates on the different components of the primary circuit can be consistently reduced by factors larger than 50. This results in much lower ambient dose rates and, hence, in very significant dose savings for subsequent decommissioning activities. Additionally, dismantlement operations of large components are considerably simplified and can be performed under conditions that wouldn't have been possible before. The project specific objectives and challenges, the technologies employed, and the results obtained are presented and commented here. (authors)

  14. Biomonitoring of heavy metal deposition in the south Ural region: some preliminary results obtained by nuclear and related techniques

    International Nuclear Information System (INIS)

    Frontas'eva, M.V.; Steinnes, E.; Lyapunov, S.M.; Cherchintsev, V.D.; Smirnov, L.I.

    1999-01-01

    The first results are reported from the analysis of feather mosses used to study heavy metal atmospheric deposition in the vicinity of Magnitogorsk, the center of the steel industry in Russia. Moss samples collected at sites 30 km to the north-west of the industry were analyzed by instrumental neutron activation analysis using epithermal neutrons (ENAA), Results for a total of 38 elements are reported, including Pb, Cd, and Cu determined by atomic absorption spectroscopy (AAS). The element concentrations in moss samples from this work are compared with relevant literature data for strongly polluted areas in Central and Northern Europe and background values from Norway obtained by the same biomonitoring technique. The concentrations of Sb in the examined area are the highest ever reported for mosses, and also levels of Fe, Cr, and V are found to be particularly high. A scanning electron microscope connected to an XRF analyzer (SEM-XRF) was used to examine the surface of the moss samples. Photographs of identified iron spherules along with other aerosol particles made at magnification of 3500 to 5000 times and corresponding XRF analyses verifying the nature of typical particles are presented

  15. How many replicate tests do I need?$-$ Variability of cookstove performance and emissions has implications for obtaining useful results

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yungang [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Sohn, Michael D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Gadgil, Ashok J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Wang, Yilun [ISO Innovative Analytics San Francisco, CA (United States); Lask, Kathleen M. [Univ. of California, Berkeley, CA (United States). College of Engineering Applied Science and Technology Program; Kirchstetter, Thomas W. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

    2013-02-01

    Almost half of the world’s population still cooks on biomass cookstoves of poor efficiency and primitive design, such as three stone fires (TSF). Emissions from biomass cookstoves contribute to adverse health effects and climate change. A number of “improved cookstoves” with higher energy efficiency and lower emissions have been designed and promoted across the world. During the design development, and for selection of a stove for dissemination, the stove performance and emissions are commonly evaluated, communicated and compared using the arithmetic average of replicate tests made using a standardized laboratory-based test, commonly the water boiling test (WBT). However, published literature shows different WBT results reported from different laboratories for the same stove technology. Also, there is no agreement in the literature on how many replicate tests should be performed to ensure “significance” in the reported average performance. This matter has not received attention in the rapidly growing literature on stoves, and yet is crucial for estimating and communicating the performance of a stove, and for comparing the performance between stoves. We present results of statistical analyses using data from a number of replicate tests of performance and emission of the Berkeley-Darfur Stove (BDS) and the TSF under well-controlled laboratory conditions. We observed moderate variability in the test results for the TSF and BDS when measuring several characteristics. Here we focus on two as illustrative: time-to-boil and PM2.5 (particulate matter less than or equal to 2.5 micrometers in diameter) emissions. We demonstrate that interpretation of the results comparing these stoves could be misleading if only a small number of replicates had been conducted. We then describe a practical approach, useful to both stove testers and designers, to assess the number of replicates needed to obtain useful data. Caution should be exercised in attaching high credibility to

  16. Design, operational experiences and beam results obtained with the SNS H- ion source and LEBT at Berkeley Lab

    International Nuclear Information System (INIS)

    Keller, R.; Thomae, R.; Stockli, M.; Welton, R.

    2002-01-01

    The ion source and Low-Energy Transport (LEBT) system that will provide H - ion beams to the Spallation Neutron Source (SNS)** Front End and the accelerator chain have been developed into a mature unit that fully satisfies the operational requirements through the commissioning and early operating phases of SNS. Compared to the early R and D version, many features of the ion source have been improved, and reliable operation at 6% duty factor has been achieved producing beam currents in the 35-mA range and above. LEBT operation proved that the purely electrostatic focusing principle is well suited to inject the ion beam into the RFQ accelerator, including the steering and pre-chopping functions. This paper will discuss the latest design features of the ion source and LEBT, give performance data for the integrated system, and report on commissioning results obtained with the SNS RFQ and Medium-Energy Beam Transport (MEBT) system. Prospects for further improvements will be outlined in concluding remarks

  17. Brazilian Scientific Mobility Program - Science without Borders - Preliminary Results and Perspectives.

    Science.gov (United States)

    McManus, Concepta; Nobre, Carlos A

    2017-05-01

    The Brazilian Scientific Mobility Program - Science without Borders (SwB) - saw the concession of over 101 thousand scholarships for Brazilian STEM students and education professionals to attend universities worldwide. As the first phase of this program ends, it is time to take a first look at its impacts, mainly on the undergraduate student body (79% of total scholarships implemented). Benefits included a 6-month language course (optional), a one year undergraduate course and optional 2 month internship in a university, government laboratory or technology company. Positive impacts have been seen on entrance into post-graduate programs (>20% of SwB students compared to 50% from families with less than 6 minimum wages per month). The impact of the program will need to be evaluated over the next years, but innovation on the part of the students is already apparent. Any new SwB program needs to take into account the lessons learned from this first experience and therefore recommendations are presented.

  18. Solar heating by radiant floor: Experimental results and emission reduction obtained with a micro photovoltaic–heat pump system

    International Nuclear Information System (INIS)

    Izquierdo, M.; Agustín-Camacho, P. de

    2015-01-01

    Highlights: • This work presents a PVT multicrystalline solar heating system for buildings. • The PV DC electricity generated was converted to AC to drive an air–water heat pump. • Experimental results obtained from December 1, 2012 to April 30, 2013 are detailed. • An environmental study is also presented. - Abstract: An experimental research with a solar photovoltaic thermal (PVT) micro grid feeding a reversible air–water, 6 kW heating capacity heat pump, has been carried out from December 2012 to April 2013. Its purpose is to heat a laboratory that is used as a house prototype for the study of heating/cooling systems. It was built in accordance with the 2013 Spanish CTE, and has an area of 35 m 2 divided into two internal rooms: one of them housing the storage system, the solar controller, the inverter and the control system; the other one is occupied by three people. Its main thermal characteristics are: UA = 125 W/°C and a maximum thermal load about 6.0 kW at the initial time. The PVT field consists of 12 modules, with a total area of 15.7 m 2 and useful area of 14 m 2 . Each module is composed of 48 polycrystalline silicon cells of 243.4 cm 2 , which with a nominal efficiency 14% can generate a power of 180 W, being the total nominal power installed 2.16 kW. The PV system stores electricity in 250 Ah batteries from where is converted from DC to AC through a 3.0 kW inverter that feeds the heat pump. This works supplying 840 l/h of hot water at 35–45 °C to the radiant floor. The data storing system is recording variables such as solar radiation; temperatures; input power to batteries; heat produced; heat transferred by the radiant floor; heat pump’s COP; isolated ratio; and solar fraction. The objective of this work is to present and discuss the experimental results and the emission reduction of CO 2 obtained during the period from 01/12/2012 to 30/04/2013, including the detailed results of two representative days of Madrid’s climate: 28

  19. The effects of metal ion PCR inhibitors on results obtained with the Quantifiler(®) Human DNA Quantification Kit.

    Science.gov (United States)

    Combs, Laura Gaydosh; Warren, Joseph E; Huynh, Vivian; Castaneda, Joanna; Golden, Teresa D; Roby, Rhonda K

    2015-11-01

    Forensic DNA samples may include the presence of PCR inhibitors, even after extraction and purification. Studies have demonstrated that metal ions, co-purified at specific concentrations, inhibit DNA amplifications. Metal ions are endogenous to sample types, such as bone, and can be introduced from environmental sources. In order to examine the effect of metal ions as PCR inhibitors during quantitative real-time PCR, 2800 M DNA was treated with 0.0025-18.750 mM concentrations of aluminum, calcium, copper, iron, nickel, and lead. DNA samples, both untreated and metal-treated, were quantified using the Quantifiler(®) Human DNA Quantification Kit. Quantification cycle (Cq) values for the Quantifiler(®) Human DNA and internal PCR control (IPC) assays were measured and the estimated concentrations of human DNA were obtained. Comparisons were conducted between metal-treated and control DNA samples to determine the accuracy of the quantification estimates and to test the efficacy of the IPC inhibition detection. This kit is most resistant to the presence of calcium as compared to all metals tested; the maximum concentration tested does not affect the amplification of the IPC or quantification of the sample. This kit is most sensitive to the presence of aluminum; concentrations greater than 0.0750 mM negatively affected the quantification, although the IPC assay accurately assessed the presence of PCR inhibition. The Quantifiler(®) Human DNA Quantification Kit accurately quantifies human DNA in the presence of 0.5000 mM copper, iron, nickel, and lead; however, the IPC does not indicate the presence of PCR inhibition at this concentration of these metals. Unexpectedly, estimates of DNA quantity in samples treated with 18.750 mM copper yielded values in excess of the actual concentration of DNA in the samples; fluorescence spectroscopy experiments indicated this increase was not a direct interaction between the copper metal and 6-FAM dye used to label the probe that

  20. Uncertainty and Sensitivity Analysis Results Obtained in the 1996 Performance Assessment for the Waste Isolation Pilot Plant

    Energy Technology Data Exchange (ETDEWEB)

    Bean, J.E.; Berglund, J.W.; Davis, F.J.; Economy, K.; Garner, J.W.; Helton, J.C.; Johnson, J.D.; MacKinnon, R.J.; Miller, J.; O' Brien, D.G.; Ramsey, J.L.; Schreiber, J.D.; Shinta, A.; Smith, L.N.; Stockman, C.; Stoelzel, D.M.; Vaughn, P.

    1998-09-01

    The Waste Isolation Pilot Plant (WPP) is located in southeastern New Mexico and is being developed by the U.S. Department of Energy (DOE) for the geologic (deep underground) disposal of transuranic (TRU) waste. A detailed performance assessment (PA) for the WIPP was carried out in 1996 and supports an application by the DOE to the U.S. Environmental Protection Agency (EPA) for the certification of the WIPP for the disposal of TRU waste. The 1996 WIPP PA uses a computational structure that maintains a separation between stochastic (i.e., aleatory) and subjective (i.e., epistemic) uncertainty, with stochastic uncertainty arising from the many possible disruptions that could occur over the 10,000 yr regulatory period that applies to the WIPP and subjective uncertainty arising from the imprecision with which many of the quantities required in the PA are known. Important parts of this structure are (1) the use of Latin hypercube sampling to incorporate the effects of subjective uncertainty, (2) the use of Monte Carlo (i.e., random) sampling to incorporate the effects of stochastic uncertainty, and (3) the efficient use of the necessarily limited number of mechanistic calculations that can be performed to support the analysis. The use of Latin hypercube sampling generates a mapping from imprecisely known analysis inputs to analysis outcomes of interest that provides both a display of the uncertainty in analysis outcomes (i.e., uncertainty analysis) and a basis for investigating the effects of individual inputs on these outcomes (i.e., sensitivity analysis). The sensitivity analysis procedures used in the PA include examination of scatterplots, stepwise regression analysis, and partial correlation analysis. Uncertainty and sensitivity analysis results obtained as part of the 1996 WIPP PA are presented and discussed. Specific topics considered include two phase flow in the vicinity of the repository, radionuclide release from the repository, fluid flow and radionuclide

  1. Uncertainty and Sensitivity Analysis Results Obtained in the 1996 Performance Assessment for the Waste Isolation Pilot Plant

    International Nuclear Information System (INIS)

    Bean, J.E.; Berglund, J.W.; Davis, F.J.; Economy, K.; Garner, J.W.; Helton, J.C.; Johnson, J.D.; MacKinnon, R.J.; Miller, J.; O'Brien, D.G.; Ramsey, J.L.; Schreiber, J.D.; Shinta, A.; Smith, L.N.; Stockman, C.; Stoelzel, D.M.; Vaughn, P.

    1998-01-01

    The Waste Isolation Pilot Plant (WPP) is located in southeastern New Mexico and is being developed by the U.S. Department of Energy (DOE) for the geologic (deep underground) disposal of transuranic (TRU) waste. A detailed performance assessment (PA) for the WIPP was carried out in 1996 and supports an application by the DOE to the U.S. Environmental Protection Agency (EPA) for the certification of the WIPP for the disposal of TRU waste. The 1996 WIPP PA uses a computational structure that maintains a separation between stochastic (i.e., aleatory) and subjective (i.e., epistemic) uncertainty, with stochastic uncertainty arising from the many possible disruptions that could occur over the 10,000 yr regulatory period that applies to the WIPP and subjective uncertainty arising from the imprecision with which many of the quantities required in the PA are known. Important parts of this structure are (1) the use of Latin hypercube sampling to incorporate the effects of subjective uncertainty, (2) the use of Monte Carlo (i.e., random) sampling to incorporate the effects of stochastic uncertainty, and (3) the efficient use of the necessarily limited number of mechanistic calculations that can be performed to support the analysis. The use of Latin hypercube sampling generates a mapping from imprecisely known analysis inputs to analysis outcomes of interest that provides both a display of the uncertainty in analysis outcomes (i.e., uncertainty analysis) and a basis for investigating the effects of individual inputs on these outcomes (i.e., sensitivity analysis). The sensitivity analysis procedures used in the PA include examination of scatterplots, stepwise regression analysis, and partial correlation analysis. Uncertainty and sensitivity analysis results obtained as part of the 1996 WIPP PA are presented and discussed. Specific topics considered include two phase flow in the vicinity of the repository, radionuclide release from the repository, fluid flow and radionuclide

  2. Assessors' Search Result Satisfaction Associated with Relevance in a Scientific Domain

    DEFF Research Database (Denmark)

    Ingwersen, Peter; Lykke, Marianne; Bogers, Toine

    2010-01-01

    genuine information tasks. Ease of assessment and search satisfaction are cross tabulated with retrieval performance measured by Normalized Discounted Cumulated Gain. Results show that when assessors find small numbers of relevant documents they tend to regard the search results with dissatisfaction and...

  3. CSIR South Africa mobile LIDAR - First scientific results: comparison with satellite, sun photometer and model simulations

    CSIR Research Space (South Africa)

    Sivakumar, V

    2009-11-01

    Full Text Available -borne measurements. The LIDAR results are compared with aerosol extinction measurements from the Stratosphere Aerosol Gas Experiment (SAGE) II, optical depth derived from sun photometers employed under the AErosol RObotic NETwork (AERONET) and backscatter...

  4. Results of environmental radiation monitoring and meteorology measurements (material prepared for obtaining the licence for RA reactor experimental operation)

    International Nuclear Information System (INIS)

    1980-10-01

    According to the demands for obtaining the licence for restarting the Ra reactor and the experimental operation this document includes the radiation monitoring measured data in the working space and environment of the RA reactor, i.e. Boris Kidric Institute. The meteorology measured data are included as well. All the measurements are performed according to the radiation protection program applied actually from the first reactor start-up at the end of 1959 [sr

  5. Obtaining a citric tristeza virus p65 protein antibody and preliminary results of p65 in vivo expression

    Directory of Open Access Journals (Sweden)

    Yanneth Torres

    2003-07-01

    Full Text Available The citric tristeza virus (CTV belongs to the Closteroviridae family which indudes the only vegetal viruses possessing genes homologous to HSP70 thermal cellular shock proteins in their genome. Such is the case of the gene encoding for the CTV p65 protein which presents high homology with the HSP70 protein family. It has been shown recently that HSP70h viral proteins (such as CTV p65 are involved both in viral assembly, as a microtubule binding protein, and in cell-cell movement. Since CTV is the most deleterious citrus pathogen, understanding this protein's role in the pathogenesis process is important. Rabbits were immunised with four synthetic peptides (corresponding to CTV p65 thermal shock protein's carboxyl-terminal region to obtain polyclonal antibodies. All the peptides used were immunogenic, even though two of them showed greater response. Whilst none of the antibodies obtained reacted to non-infected plant extract, the p65 proteins was detected in extracts taken from citric plants infected with CTV Based on the antibody's reaction to two Colombian isolates having different serological characteristics, the p65 antibody's immunological behaviour appeared to be independent of the symptomatic severity of the CTV isolates. It was shown that the ORF encoded for the HSP70 homologue in CTV was expressed in vivo, even though the p65 antibody was only detected in concentrated protein extracts taken from infected plants, supporting reports from other studies that the concentration of this protein in plants infected with CTV is low. This is the first time that a polyclonal CTV antibody has been obtained in Colombia against p65 (a protein intervening in viral assembly and movement. Adapting a technique for obtaining p65 antibodies by using synthetic peptides as immunogens could be useful in the future for detecting or diagnosing p65 proteins present in different Colombian CTV isolates, especially in developing studies contributing towards greater

  6. Visualization of atomic distances at the 1MV electron microscope: first results obtained on the Grenoble 1MV microscope

    International Nuclear Information System (INIS)

    Bourret, A.

    1975-01-01

    Practical and theoretical conditions for obtaining high resolution lattice images are presented. The use of a high voltage electron microscope is particularly powerful to visualize distances smaller than 3A. A 2A resolution test on (200) gold planes has been carried out on the Grenoble 1MV microscope. It would be possible at this level to study the crystalline defects such as dislocations or grain boundaries [fr

  7. Science Camps in Europe--Collaboration with Companies and School, Implications and Results on Scientific Literacy

    Science.gov (United States)

    Lindner, M.; Kubat, C.

    2014-01-01

    The paper informs on the characteristics of a Comenius Network of seven organizations, who are collaborating in exchanging best practice on science camps. This exchange includes evaluation results on more science camps of European organizations, which will deliver information on organization, collaboration with companies, pedagogical aspects, as…

  8. PAL-XFEL soft X-ray scientific instruments and X-ray optics: First commissioning results

    Science.gov (United States)

    Park, Sang Han; Kim, Minseok; Min, Changi-Ki; Eom, Intae; Nam, Inhyuk; Lee, Heung-Soo; Kang, Heung-Sik; Kim, Hyeong-Do; Jang, Ho Young; Kim, Seonghan; Hwang, Sun-min; Park, Gi-Soo; Park, Jaehun; Koo, Tae-Yeong; Kwon, Soonnam

    2018-05-01

    We report an overview of soft X-ray scientific instruments and X-ray optics at the free electron laser (FEL) of the Pohang Accelerator Laboratory, with selected first-commissioning results. The FEL exhibited a pulse energy of 200 μJ/pulse, a pulse width of power of 10 500 was achieved. The estimated total time resolution between optical laser and X-ray pulses was <270 fs. A resonant inelastic X-ray scattering spectrometer was set up; its commissioning results are also reported.

  9. Shaking table testing of a HTGR reactor core, comparison with the results obtained using a nonlinear mathematical model

    International Nuclear Information System (INIS)

    Berriaud, C.; Cebe, E.; Livolant, M.; Buland, P.

    1975-01-01

    Two series of horizontal tests have been performed at Saclay on the shaking table VESUVE: sinusoidal test and time history response. Sinusoidal tests have shown the strongly nonlinear dynamic behavior of the core. The resonant frequency of the core is dependent on the level of the excitation. These phenomena have been explained by a computer code, which is a lumped mass nonlinear model. El Centro time history displacement at the level of PCRV was reproduced on the shaking table. The analytical model was applied to this excitation and good comparison was obtained for forces and velocities [fr

  10. Comparing the Floating Point Systems, Inc. AP-190L to representative scientific computers: some benchmark results

    International Nuclear Information System (INIS)

    Brengle, T.A.; Maron, N.

    1980-01-01

    Results are presented of comparative timing tests made by running a typical FORTRAN physics simulation code on the following machines: DEC PDP-10 with KI processor; DEC PDP-10, KI processor, and FPS AP-190L; CDC 7600; and CRAY-1. Factors such as DMA overhead, code size for the AP-190L, and the relative utilization of floating point functional units for the different machines are discussed. 1 table

  11. HMI Department of Radiation Chemistry: Results of scientific activities in 1984

    International Nuclear Information System (INIS)

    1985-01-01

    In the radiation chemistry department of the Hahn-Meitner-Institute in Berlin, 4 subjects are treated largely the progress of which made in 1984 is herein reported: 1) Interface processes and energy conversion (reaction pathways of photoinduced charge carriers and their in energy conversion mechanisms); 2) Pulse radiolysis (generation and investigation of shortlived chemically quick-reacting particles); 3) Kinematics (reciprocal action with ion, atom and molecule collisions; clarification of the dynamics of chemical reactions; 4) Insulators and plastics/physical and chemical primary processes when these materials are subjected to high-energy radiation, light or UV light). A list of publications and lectures is added to complement the description of results gained from R and D work. (BR) [de

  12. Results of the scientific and technical activities of the Nuclear Reactors and Thermal Physics Institute for 2014. Scientific and technical collection

    International Nuclear Information System (INIS)

    Trufanov, A.A.; Sorokin, A.P.; Vereshchagina, T.N.

    2015-01-01

    In the collection there are the main results of research and development obtained by the researchers of the Nuclear Reactors and Thermal Physics Institute FSUE SSC RF - IPPE in 2014, the problems and questions of further investigations are formulated and discussed. Considerable body of data on neutronic, thermohydraulic and technological studies carried out in the frameworks of Proryv project are presented, calculational and experimental justification of design choices and safety of projects on RU BN-1200, multipurpose research reactor MBIR with sodium coolant, RU BREST-OD-300 with lead coolant are among them. The results of experimental and calculational thermophysical investigations in justification of operation conditions and safety of nuclear power plants with water-cooled reactors (WWER-1000, WWER-TOI), pilot studies on innovation project WWER-SKD with supercritical water, in justification of thermonuclear reactor blanket are given [ru

  13. Obtaining land cover changes information from multitemporal analysis of Landsat-TM images: results from a case study in West African dryland

    Science.gov (United States)

    Nutini, F.; Boschetti, M.; Brivio, P. A.; Antoninetti, M.

    2012-04-01

    The Sahelian belt of West Africa is a semiarid region characterized by wide climate variations, which can in turn affect the livelihood of local populations particularly in rangeland areas, as happens during the dramatic food crisis in the 70-80s caused by rainfall scarcity. The monitoring of natural resources and rainfed agricultural activities, with the aim to provide information to support Sahelian food security action, needs the production of detailed thematic maps as emphasized by several scientific papers. In this framework, a study was conducted to develop a method to exploit time series of remote sensed satellite data to 1) provide reliable land cover (LC) map at local scale in a dry region and 2) obtain a LC change (LCC) map that contribute to identify the plausible causes of local environmental instability. Satellite images used for this work consist in a time series of Landsat Thematic Mapper (TM) (path row 195-50) acquired in the 2000 (6 scenes) and 2007 (9 scenes) from February (Dry season) to September (end of wet season). The study investigates the different contribution provided by spectra information of a single Landsat TM image and by time series of derived NDVI. Different tests have been conducted with different combination of data set (spectral and temporal)in order to identify the best approach to obtain a LC map in five classes of interest: Shrubland, Cultivated Land, Water body, Herbaceous vegetation and Bare soil. The best classification approach is exposed and applied on two years in the last decade. The comparison between this two LC results in land cover change map, that displays the changes of vegetation patterns that have been characterized the area. The discussed results show a largely stable dryland region, but locally characterized by hot-spot of decreasing in natural vegetation inside the rangelands and an increasing of cultivations along fossil valleys where human activities are slightly intense. The discussion shows that this hot

  14. An easy way to obtain strong duality results in linear, linear semidefinite and linear semi-infinite programming

    NARCIS (Netherlands)

    Pop, P.C.; Still, Georg J.

    1999-01-01

    In linear programming it is known that an appropriate non-homogeneous Farkas Lemma leads to a short proof of the strong duality results for a pair of primal and dual programs. By using a corresponding generalized Farkas lemma we give a similar proof of the strong duality results for semidefinite

  15. First Results from HOTSPOT: The Snake River Plain Scientific Drilling Project, Idaho, U.S.A.

    Directory of Open Access Journals (Sweden)

    John W. Shervais

    2013-03-01

    Full Text Available HOTSPOT is an international collaborative effort to understand the volcanic history of the Snake River Plain (SRP. The SRP overlies a thermal anomaly, the Yellowstone-Snake River hotspot, that is thought to represent a deep-seated mantle plume under North America. Theprimary goal of this project is to document the volcanic and stratigraphic history of the SRP, which represents the surface expression of this hotspot, and to understand how it affected the evolution of continental crust and mantle. An additional goal is to evaluate the geothermal potential of southern Idaho.Project HOTSPOT has completed three drill holes. (1 The Kimama site is located along the central volcanic axis of the SRP; our goal here was to sample a long-term record of basaltic volcanism in the wake of the SRP hotspot. (2 The Kimberly site is located near the margin of the plain; our goal here was to sample a record of high-temperaturerhyolite volcanism associated with the underlying plume. This site was chosen to form a nominally continuous record of volcanism when paired with the Kimama site. (3 The Mountain Home site is located in the western plain; our goal here was to sample the Pliocene-Pleistocene transition in lake sediments at this site and to sample older basalts that underlie the sediments.We report here on our initial results for each site, and on some of the geophysical logging studies carried out as part of this project.

  16. Scientific Growth and Identity Development during a Postbaccalaureate Program: Results from a Multisite Qualitative Study.

    Science.gov (United States)

    Remich, Robin; Naffziger-Hirsch, Michelle E; Gazley, J Lynn; McGee, Richard

    2016-01-01

    This report builds upon our previous study, which described five patterns of why college graduates join National Institutes of Health (NIH)-funded diversity-focused Postbaccalaureate Research Education Programs (PREP). A 2015 report from the NIH showed that a high fraction of PREP participants matriculate into PhD and MD/PhD programs. This current study reveals how participants change during PREP, the program elements that facilitate change, and how identity as a graduate student and future scientist develops. Data come from in-depth interviews done at the beginning and end of PREP with 48 individuals from seven PREP programs. Results reveal three domains of development: academics, research, and presentation of oneself; each domain contains a developmental continuum. Key attributes of PREP enabling development include opportunities to attend graduate-level classes and seminars; time to practice reading literature; extended lab time with one's own project; high and explicit expectations from mentors; and multiple opportunities to talk about science and improve communication skills. PREP enabled participants to develop their identities as graduate students and to anticipate being seen by others as highly prepared for PhD training. After PREP, 85% (n = 41) started the PhD or MD/PhD, making PREP an intervention approach with great potential to broaden participation in biomedical PhD programs. © 2016 R. Remich et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  17. Recent results from Pb - Au collisions at 158 GeV/c per nucleon obtained with the CERES spectrometer

    CERN Document Server

    Agakichiev, G; Baur, R; Braun-Munzinger, P; Ceretto, F; Cherlin, A; Drees, A; Esumi, S C; Faschingbauer, U; Fraenkel, Zeev; Glässel, P; Hering, G; Holl, P; Jung, C; Lenkeit, B C; Marin, A; Messer, M; Miskowiec, D; Panebratsev, Yu A; Pfeiffer, A; Rak, J; Ravinovich, I; Razin, S V; Rehak, P; Richter, M; Saveljic, N; Schmitz, W; Schükraft, Jürgen; Seipp, W; Shimansky, S S; Slivova, J; Socol, E; Specht, H J; Stachel, J J; Tserruya, Itzhak; Ullrich, T S; Voigt, C A; Voloshin, S A; Weber, C; Wessels, J P; Wienold, T; Wurm, J P; Yurevich, V I

    1999-01-01

    During the 1996 lead run time, CERES has accumulated 42 million events, corresponding to a factor of 5 more statistics than in 1995 and 2.5 million events of a special photon-run. We report on the results of the low-mass e/sup +/e/sup -/-pair analysis. Since the most critical item is the poor signal-to-background ratio we also discuss the understanding of this background, in absolute terms, with the help of a detailed Monte Carlo simulation. We show preliminary results of the photon analysis and summarize the results of the hadron analysis preliminarily reported on already at QM'97. (19 refs) .

  18. Study of the nuclear multifragmentation: recent results obtained with the INDRA detector in the intermediate energy domain

    International Nuclear Information System (INIS)

    Saint-Laurent, F.

    1994-01-01

    The new 4π multidetector INDRA, designed for the study of hot nuclear systems decaying by multifragmentation, is available for experiments since the beginning of 1993. First results emphasize its very high detection capabilities. Preliminary results on multiplicity distributions and elemental charge distributions in the most violent collisions for the 36 Ar + 58 Ni and 129 Xe + nat Sn systems are presented. (author) 5 figs., 22 refs

  19. Monitoring Of The Middle Atmosphere: Grille Spectrometer Experiment Results On Board SPACELAB 1 And Scientific Program Of ATLAS 1 Mission

    Science.gov (United States)

    Papineau, N.; Camy-Peyret, C.; Ackerman, Marcel E.

    1989-10-01

    Measurements of atmospheric trace gases have been performed during the first Spacelab mission on board the Space Shuttle. The principle of the observations is infrared absorption spectroscopy using the solar occultation technique. Infrared absorption spectra of NO, CO, CO2, NO2, N20, CH4 and H2O have been recorded using the Grille spectrometer developped by ONERA and IASB. From the observed spectra, vertical profiles for these molecules have been derived. The present paper summarizes the main results and compares them with computed vertical profiles from a zonally averaged model of the middle atmosphere. The scientific objectives of the second mission, Atlas 1, planned for 1990 are also presented.

  20. Geology of the Terra Cimmeria-Utopia Planitia Highland Lowland Transitional Zone: Final Technical Approach and Scientific Results

    Science.gov (United States)

    Skinner, J. A., Jr.; Tanaka, K. L.

    2010-01-01

    The southern Utopia highland-lowland transitional zone extends from northern Terra Cimmeria to southern Utopia Planitia and contains broad, bench-like platforms with depressions, pitted cones, tholi, and lobate flows. The locally occurring geologic units and landforms contrast other transitional regions and record a spatially partitioned geologic history. We systematically delineated and described the geologic units and landforms of the southern Utopia-Cimmeria highland-lowland transitional zone for the production of a 1:1,000,000-scale geologic map (MTMs 10237, 15237, 20237, 10242, 15242, 20242, 10247, 15247, and 20247). Herein, we present technical and scientific results of this mapping project.

  1. Main results obtained in France in the development of the gaseous diffusion process for uranium isotope separation

    International Nuclear Information System (INIS)

    Frejacques, C.; Bilous, O.; Dixmier, J.; Massignon, D.; Plurien, P.

    1958-01-01

    The main problems which occur in the study of uranium isotope separation by the gaseous diffusion process, concern the development of the porous barrier, the corrosive nature of uranium hexafluoride and also the chemical engineering problems related to process design and the choice of best plant and stage characteristics. Porous barriers may be obtained by chemical attack of non porous media or by agglomeration of very fine powders. Examples of these two types of barriers are given. A whole set of measurement techniques were developed for barrier structure studies, to provide control and guidance of barrier production methods. Uranium hexafluoride reactivity and corrosive properties are the source of many difficult technological problems. A high degree of plant leak tightness must be achieved. This necessity creates a special problem in compressor bearing design. Barrier lifetime is affected by the corrosive properties of the gas, which may lead to a change of barrier structure with time. Barrier hexafluoride permeability measurements have helped to make a systematic study of this point. Finally an example of a plant flowsheet, showing stage types and arrangements and based on a minimisation of enriched product costs is also given as an illustration of some of the chemical engineering problems present. (author) [fr

  2. Friction and wear in liquid-metal systems: comparability problems of test results obtained from different test facilities

    International Nuclear Information System (INIS)

    Wild, E.; Mack, K.J.

    1976-01-01

    Operational induced relative movements take place between contacting components in the core region of sodium cooled reactors. To ensure reliable long term functioning of such friction loaded components, materials are needed with good sliding properties and high wear resistance. Therefore, tribological properties of material combinations in liquid metal have been investigated experimentally for many years at various research establishments. However, despite identical boundary conditions, the comparison of results published does not yield a satisfactory agreement. The cause must be seen in the individual design and concept of the test sections used. This discrepancy was investigated. The results show that the elasticity, mass movement, and relative motion characteristic to the system prove to be the most important criteria influencing the test results

  3. A new warfarin dosing algorithm including VKORC1 3730 G > A polymorphism: comparison with results obtained by other published algorithms.

    Science.gov (United States)

    Cini, Michela; Legnani, Cristina; Cosmi, Benilde; Guazzaloca, Giuliana; Valdrè, Lelia; Frascaro, Mirella; Palareti, Gualtiero

    2012-08-01

    Warfarin dosing is affected by clinical and genetic variants, but the contribution of the genotype associated with warfarin resistance in pharmacogenetic algorithms has not been well assessed yet. We developed a new dosing algorithm including polymorphisms associated both with warfarin sensitivity and resistance in the Italian population, and its performance was compared with those of eight previously published algorithms. Clinical and genetic data (CYP2C9*2, CYP2C9*3, VKORC1 -1639 G > A, and VKORC1 3730 G > A) were used to elaborate the new algorithm. Derivation and validation groups comprised 55 (58.2% men, mean age 69 years) and 40 (57.5% men, mean age 70 years) patients, respectively, who were on stable anticoagulation therapy for at least 3 months with different oral anticoagulation therapy (OAT) indications. Performance of the new algorithm, evaluated with mean absolute error (MAE) defined as the absolute value of the difference between observed daily maintenance dose and predicted daily dose, correlation with the observed dose and R(2) value, was comparable with or slightly lower than that obtained using the other algorithms. The new algorithm could correctly assign 53.3%, 50.0%, and 57.1% of patients to the low (≤25 mg/week), intermediate (26-44 mg/week) and high (≥ 45 mg/week) dosing range, respectively. Our data showed a significant increase in predictive accuracy among patients requiring high warfarin dose compared with the other algorithms (ranging from 0% to 28.6%). The algorithm including VKORC1 3730 G > A, associated with warfarin resistance, allowed a more accurate identification of resistant patients who require higher warfarin dosage.

  4. THE EFFECT OF USING DIGIMON (SCIENCE DIGITAL MODULE WITH SCIENTIFIC APPROACH AT THE VISUALIZATIONOF STUDENTS’ INDEPENDENCE AND LEARNING RESULTS

    Directory of Open Access Journals (Sweden)

    M. W. Syahroni

    2016-04-01

    Full Text Available The aim of this research was to determine the influence of digimon based scientific approach on independence and learning autcomes of learners. This research has designed as quasi-experimental nonequivalent control group design. Subjects of this reaserch is learners at 8 E and 8 F on SMP N 1 Magelang in year 2014/2015. The results showed that there was a strong perfect linear relationship between digimon with independent learning or learning outcomes of learners. The result of independent assessment on the experiment group was 85,47 while the result of independent assessment on the control group was 69,94. Digimon based scientific approach are influential 51.93% to the independence of learners, while the rest influenced by other factors. Digimon give influence 39.69% on learning outcomes of learners, while the rest influenced by other factors.This relation is empharized through an independent test (t-test which shows dependent bridge between digimon with independence toward concept understanding of learners in experiment group.

  5. Cytogenetical effects of low doses: results obtained by N.N.Luchik and present-day problems

    International Nuclear Information System (INIS)

    Geras'kin, S.A.; Sevan'kaev, A.V.

    1996-01-01

    The analysis of present status of the problem of quantitative assessment of cytogenetic effects low is presented. The importance of works of N.V. Luchik is demonstrated for the development of this field of radiobiology. The results of the author's own experimental and theoretical research on the regularities of induction of cytogenetical damage by low doses of ionising radiation are presented

  6. Detection of occlusal caries lesions using fluorescence: correlation between histology and obtained results for Diagnodent and spectroscopy

    International Nuclear Information System (INIS)

    Rocha-Cabral, Renata Maciel

    2006-01-01

    The aims of this study were to develop and test a method to detect caries lesions in vivo and in vitro, using a portable spectrometer (PS); to analyze the performance of PS as well as the commercial device Diagnodent (Dd); correlate them with the gold standard, their transversal section areas and lesions depth and between themselves. 66 occlusal pre-molars sites were examined in vivo with Dd. Sequentially, fluorescence (λexc ∼ 657 nm) was collected by an optical fiber, conducted to PS and then analyzed as spectra, which were normalized and had calculated the Ratios of their Areas Under the Curves (RAUC) of carious and sound tissues. Experiments were conducted in vitro in the same sites. Gold Standard was obtained by polarized light microscopy. Pearson correlation was used to compare the devices with transversal section area, lesions depth and between themselves. The area under ROC curve, sensitivity, specificity as well as accuracy were calculated and verified with McNemar test. Dd and RAUC showed statistically significant correlation with gold standard (p < 0.01 for Dd and p < 0.05 for RAUC) and between themselves (r = 0,83 in vivo and r = 0,87 in vitro). Although it was significant, the devices showed low correlation with depth of lesions in vivo and in vitro (r = ∼ 0.43). The transversal section area of the lesion had no influence on readings in both devices. Dd showed higher sensitivity (0.76) than PS (0.60) in vivo (p < 0.05), though this fact was not able to improve its performance. In turn, PS showed higher sensitivity (0.88) than Dd (0.79) in vitro, but this difference was not significantly. The other parameters did not show statistically significant differences (p < 0.05) between methods. PS showed positive correlation with Dd, equal correlation with lesions depth and higher ability of detecting the disease in vitro, what suggests that if accompanied with a conic and an angulated probe and a dedicated software, the PS method could be useful in clinics

  7. Quality control of baby food products on the basis of results obtained using the instrumental neutron-activation analysis technique

    International Nuclear Information System (INIS)

    Mukhammedov, S.; Khaydarov, A.; Pardaev, O.

    2013-01-01

    The purpose of this study was to use the instrumental neutron-activation analysis (INAA) to determine the elemental composition of some kind of imported baby food products (BFP) and to compare the results with the permissible contents. The nuclear reactor WWR-SM of INP has been used to develop INAA to study the mineral composition of some children's food products. The concentration of 26 trace elements, including Mg, Ca, Fe, Zn, etc. was found. The comparison of the results with regulation contents and the daily data on food needs have shown that the investigated group of BFP does not meet the requirements for all trace and macro elements composition. (authors)

  8. Pressure suppression system (PSS) for nuclear ships. Experimental results obtained at the GKSS PSS-test-facillity

    International Nuclear Information System (INIS)

    Aust, E.; Niemann, H.R.; Schwan, H.; Vollbrandt, J.

    1978-01-01

    The PSS-test facility is shortly presented which was designed to show experimentally the operation of the pressure suppression containment for the NCS 80 concept. The results of the experimental LOCA-simulation tests in the PSS-test facility are illustrated by diagrams. The observed phenomena as chugging and pessure oscillations immediately after vent clearing are reported as well as the thermohydraulic loadings of the total system. Finally a short view is given on the future test program

  9. Study of Finite Element Number Influence over the Obtained Results in Finite Element Analyses of a Mechanical Structure

    Directory of Open Access Journals (Sweden)

    Ana-Maria Budai

    2013-05-01

    Full Text Available This paper present the results of a study that was made to establish the influence of finite element number used to determined the real load of a structure. Actually, the study represent a linear static analyze for a link gear control mechanism of a Kaplan turbine. The all analyze was made for the normal condition of functioning having like final scope to determine de life time duration of mentioned mechanism.

  10. Constructing kinetics fatigue diagrams using testing results obtained on a machine with rigid loading for specimens of various thickness

    International Nuclear Information System (INIS)

    Simin'kovich, V.N.; Gladkij, Ya.N.; Deev, N.A.

    1981-01-01

    Bending tests of 40KhS steel specimens, tempered at 200 and 500 deg C, are conducted to investigate the possible effects of specimen thickness on fatigue crack growth. Kinetic fatigue diagrams are constructed using the investigation results. An increase in crack growth with thickness is observed only in high-tempered specimens. Changes in specimen thickness do not affect crack growth in 40KhS low-tempered steel [ru

  11. Characterization of High-Power Turbomachinery Tilting Pad Journal Bearings: First Results Obtained on a Novel Test Bench

    Directory of Open Access Journals (Sweden)

    Enrico Ciulli

    2018-01-01

    Full Text Available Tilting pad journal bearings are usually employed in turbomachines for their stable behavior at high rotational speeds. Devoted test rigs have been realized to validate the predictions of theoretical models. However, the design of new high-performance and large-size bearings needs to be supported by experimental investigations on high-performance large test rigs. The main characteristics of a recently built facility for testing large tilting pad journal bearings with diameters from 150 to 300 mm are described in this work. The test rig is versatile and can be used to test bearings of different size, configurations and to investigate the influence of many parameters, even the effect of misalignment. Sample results of the static characterization of a four-pad high-performance tilting pad journal bearing are reported evidencing some transient effects. A few sample dynamic results are also reported. The presented experimental results demonstrated the capabilities of the rig for investigating the static and the dynamic characteristics of the bearings accurately measuring slow and fast variables.

  12. Porous titanium obtained by a new powder metallurgy technique: Preliminary results of human osteoblast adhesion on surface polished substrates.

    Science.gov (United States)

    Biasotto, M; Ricceri, R; Scuor, N; Schmid, C; Sandrucci, M A; Di Lenarda, R; Matteazzi, P

    2003-01-01

    This study concerns a novel powder metallurgy method for producing porous titanium (pTi) exhibiting high mechanical properties. The preparation procedure consisted of the following stages: first, the preparation of Ti and titanium hydride (TiH2) powder mixtures and their consolidation with a cold isostatic press, followed by a sintering of the green bodies performed with hot isostatic press (HIP) equipment. Thermal decomposition in controlled environment of the TiH2 phase results in the foam structure. The resulting porosity percolates with a volume fraction of approximately 20%. The final material exhibits interesting mechanical properties, comparable to those of full density titanium (between grade 2 and grade 3), with the advantage of a minor density. The samples produced were tested to verify their biological response by studying the effectiveness of osteoblast adhesion and growth. In this preliminary study, osteoblastic cell morphology was investigated and compared to that observed on fully dense commercially pure titanium (Ti-cp) (ASTM, grade 3). The preliminary results were promising regarding cellular adhesion and spreading. (Journal of Applied Biomaterials & Biomechanics 2003; 1: 172-7).

  13. High resolution spectrometry: how the analyzer and spectrometer performances and the beam emittance contribute to the results obtained

    International Nuclear Information System (INIS)

    Roussel, P.

    1984-01-01

    Using first order calculations derived for an achromatic system A) (deltaxsub(F)/deltaEsub(i)=0) or an optimised system O) (xsub(F) minima). It is shown that the final resolution measured in the local plane of the spectrometer depends only on the emittance of the accelerator and of the efficient area of the analyser exclusive of the properties of the spectrometer. The use of this result is only limited by higher order terms in the calculation or considerations out of this scope like target effects etc.. [fr

  14. On the use of Empirical Data to Downscale Non-scientific Scepticism About Results From Complex Physical Based Models

    Science.gov (United States)

    Germer, S.; Bens, O.; Hüttl, R. F.

    2008-12-01

    The scepticism of non-scientific local stakeholders about results from complex physical based models is a major problem concerning the development and implementation of local climate change adaptation measures. This scepticism originates from the high complexity of such models. Local stakeholders perceive complex models as black-box models, as it is impossible to gasp all underlying assumptions and mathematically formulated processes at a glance. The use of physical based models is, however, indispensible to study complex underlying processes and to predict future environmental changes. The increase of climate change adaptation efforts following the release of the latest IPCC report indicates that the communication of facts about what has already changed is an appropriate tool to trigger climate change adaptation. Therefore we suggest increasing the practice of empirical data analysis in addition to modelling efforts. The analysis of time series can generate results that are easier to comprehend for non-scientific stakeholders. Temporal trends and seasonal patterns of selected hydrological parameters (precipitation, evapotranspiration, groundwater levels and river discharge) can be identified and the dependence of trends and seasonal patters to land use, topography and soil type can be highlighted. A discussion about lag times between the hydrological parameters can increase the awareness of local stakeholders for delayed environment responses.

  15. Thermal monitoring of hydrothermal activity by permanent infrared automatic stations: Results obtained at Solfatara di Pozzuoli, Campi Flegrei (Italy)

    Science.gov (United States)

    Chiodini, G.; Vilardo, G.; Augusti, V.; Granieri, D.; Caliro, S.; Minopoli, C.; Terranova, C.

    2007-12-01

    A permanent automatic infrared (IR) station was installed at Solfatara crater, the most active zone of Campi Flegrei caldera. After a positive in situ calibration of the IR camera, we analyze 2175 thermal IR images of the same scene from 2004 to 2007. The scene includes a portion of the steam heated hot soils of Solfatara. The experiment was initiated to detect and quantify temperature changes of the shallow thermal structure of a quiescent volcano such as Solfatara over long periods. Ambient temperature is the main parameter affecting IR temperatures, while air humidity and rain control image quality. A geometric correction of the images was necessary to remove the effects of slow movement of the camera. After a suitable correction the images give a reliable and detailed picture of the temperature changes, over the period October 2004 to January 2007, which suggests that origin of the changes were linked to anthropogenic activity, vegetation growth, and the increase of the flux of hydrothermal fluids in the area of the hottest fumaroles. Two positive temperature anomalies were registered after the occurrence of two seismic swarms which affected the hydrothermal system of Solfatara in October 2005 and October 2006. It is worth noting that these signs were detected in a system characterized by a low level of activity with respect to systems affected by real volcanic crisis where more spectacular results will be expected. Results of the experiment show that this kind of monitoring system can be a suitable tool for volcanic surveillance.

  16. [The medical dissertation--no definitive model. Results of a survey about obtaining a doctorate contradict frequently stated opinions].

    Science.gov (United States)

    Weihrauch, M; Strate, J; Pabst, R

    2003-12-05

    The relevance of medical dissertations is controversial in Germany. The "Wissenschaftsrat" (Science Council) of Germany even made the radical proposal of abolishing medical dissertations, in their present form, in the recently published "Guidelines on writing a thesis". Using a questionnaire with 22 items all students submitting their dissertations within one year at the Medical School in Hannover were asked to participate in a survey about the dissertation, supervision, time spent on it and publishing the results. The answers were evaluated statistically by explorative data analysis. A total of 232 questionnaires were evaluated, which is equivalent to a response rate of 87% (47% were women). A majority of 69% had prepared their thesis in a clinical institution. The supervision during various phases of the dissertation was graded as good. Altogether 90% thought that it had been personally worth-while. In 57% of cases the data of the dissertation had already been published and in 39 % of these cases the author of the dissertation was listed as first author of the publication. In agreement with former studies in German universities an overwhelming majority of 90% of respondents graded dissertations as a significant part of their medical studies, although requiring much additional time. They would recommend such a research phase to younger students as highly valuable. These results are in contrast to many repeatedly made statements.

  17. Overview of experimental results obtained under the Prestressed Concrete Nuclear Pressure Vessel Development Program at the Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Naus, D.J.

    1978-01-01

    Under the Prestressed Concrete Nuclear Pressure Vessel Development Program at the Oak Ridge National Laboratory, various aspects of Prestressed Concrete Pressure Vessels (PCPVs) are investigated and evaluated with respect to reliability, structural performance, constructability, and economy. Based upon identified needs, analytical and experimental investigations are conducted. Areas of interest include finite-element analysis development, materials and structural behavior tests, instrumentation evaluation and development, and structural model tests. Studies have been recently completed in the following areas: concrete embedment instrumentation systems for PCPVs, grouted-nongrouted prestressing systems, acoustic emission as a technique for structural integrity monitoring, and model tests of steam-generator cavity closure plugs for a Gas-Cooled Fast Reactor (GCFR). An overview of results is presented

  18. Wear of control rod cluster assemblies and of instrumentation thimbles: first results obtained with the vibrateau wear simulator

    International Nuclear Information System (INIS)

    Zbinden, M.; Hersant, D.

    1993-07-01

    Several REP components are affected by a particular sort of damage called impact/sliding wear. This kind of wear, originating from flow induced vibrations, affects loosely supported tubular structures. The main involved components are: - the RCCAs claddings and the guides tubes, - the instrumentation thimbles, - the fuel rods claddings, - the SG tubes. The R and D Division is concerned with studies aiming to understand and to master the phenomena leading to this wear. The MTC Branch is charged of the study of the wear itself. Tests are carried out on wear rigs to understand and to model wear mechanisms. The following work is related to the two first wear tests campaigns on the VIBRATEAU wear simulator: - a reproducibility test series in order to assess the spreading of the experimental results, - a comparative test series on surface treatments used to improve the components war resistance. (authors). 7 figs., 2 tabs., 4 refs

  19. Short Communication: Testosterone Measured with an Automatic Immunoassay Compares Reasonbly Well to Results Obtained by LC-MS/MS

    DEFF Research Database (Denmark)

    Knudsen, Cindy Søndersø; Højskov, Carsten Schriver; Møller, Holger Jon

    2016-01-01

    Background: Previous studies have reported problems measuring testosterone with immunological assays. Here we explore an automatic second generation immunoassay compared to a LC-MS/MS method. Methods: We collected blood samples from 76 women and measured testosterone, progesterone, gender...... hormonebinding globulin (SHBG), and albumin employing Cobas e601/c501. Testosterone, androstenedione (andro), dehydroepiandrosterone sulphate (DHEAS), and 17-hydroxyprogesterone (17-OHP) concentrations were measured employing LC-MS/MS. We evaluated the difference between testosterone measured by the two methods...... and examined the potential interference from the selected steroids and bindings proteins. Results: Testosterone concentrations measured by the two methods yielded: Cobas e601 = 1.240 x (LC-MS/MS) - 0.197, r = 0.84, for testosterone concentrations between 0.22 - 4.9 nmol/L. A positive correlation was observed...

  20. First results of registering ionospheric disturbances obtained with SibNet network of GNSS receivers in active space experiments

    Science.gov (United States)

    Ishin, Artem; Perevalova, Natalia; Voeykov, Sergey; Khakhinov, Vitaliy

    2017-12-01

    Global and regional networks of GNSS receivers have been successfully used for geophysical research for many years; the number of continuous GNSS stations in the world is steadily growing. The article presents the first results of the use of a new regional network of GNSS stations (SibNet) in active space experiments. The Institute of Solar-Terrestrial Physics of Siberian Branch of Russian Academy of Sciences (ISTP SB RAS) has established this network in the South Baikal region. We describe in detail SibNet, characteristics of receivers in use, parameters of antennas and methods of their installation. We also present the general structure of observation site and the plot of coverage of the receiver operating zone at 50-55° latitudes by radio paths. It is shown that the selected location of receivers allows us to detect ionospheric irregularities of various scales. The purpose of the active space experiments was to reveal and record parameters of the ionospheric irregu larities caused by effects from jet streams of Progress cargo spacecraft. The mapping technique enabled us to identify weak, vertically localized ionospheric irregularities and associate them with the Progress spacecraft engine impact. Thus, it has been shown that SibNet deployed in the Southern Baikal region is an effective instrument for monitoring ionospheric conditions.

  1. Plutonium burning and minor actinides transmutation in fast reactors: first results obtained within the frame of the CAPRA programme

    International Nuclear Information System (INIS)

    Garnier, J.C.; Rouault, J.; Kiefhaber, E.; Sunderland, R.

    1994-01-01

    The CAPRA program gas been established by the CEA in early 1993 with the primary goal of investigating the feasibility of a fast reactor core optimised to burn plutonium. CAPRA is now being jointly pursued by the European Research and Development (R and D) organisations (CEA in France, AEA in the UK and KFK in Germany) and the design companies grouped under the European Fast Reactor Associates umbrella. The first phase of the CAPRA programme is planned to last until the end of 1994. Its goal is to deliver an overall assessment on the feasibility of fast reactor plutonium burner cores. This assessment will also include the minor actinides transmutation capability of such cores. The objective of this paper is to present the progress made so far. After an introduction to the basic physics boundary conditions of burner cores, a description of the studies performed and the main results are given. Then the efforts made towards the definition of an accompanying experimental Research and Development (R and D) program are summarised, followed by the conclusions and an outlook to the future work. (authors). 4 refs., 3 figs., 2 tabs

  2. Process of Integrating Screening and Detailed Risk-based Modeling Analyses to Ensure Consistent and Scientifically Defensible Results

    International Nuclear Information System (INIS)

    Buck, John W.; McDonald, John P.; Taira, Randal Y.

    2002-01-01

    To support cleanup and closure of these tanks, modeling is performed to understand and predict potential impacts to human health and the environment. Pacific Northwest National Laboratory developed a screening tool for the United States Department of Energy, Office of River Protection that estimates the long-term human health risk, from a strategic planning perspective, posed by potential tank releases to the environment. This tool is being conditioned to more detailed model analyses to ensure consistency between studies and to provide scientific defensibility. Once the conditioning is complete, the system will be used to screen alternative cleanup and closure strategies. The integration of screening and detailed models provides consistent analyses, efficiencies in resources, and positive feedback between the various modeling groups. This approach of conditioning a screening methodology to more detailed analyses provides decision-makers with timely and defensible information and increases confidence in the results on the part of clients, regulators, and stakeholders

  3. Structuring scientific works in the “Introduction, Methods, Results and Discussion” format – what a beginner ought to know

    Directory of Open Access Journals (Sweden)

    N. V. Avdeeva

    2016-01-01

    Full Text Available Reference materials about the “Introduction, Methods, Results and Discussion”, which is a commonly used international format for scientific works, have become available for Russian authors nowadays, still lack of knowledge about the format would pop up here or there, especially when we speak about beginners. The faults which would appear regularly in work structuring prompted the present research, the aim of which is to compare the information about the IMRAD format with the specific difficulties beginning authors would often face when preparing their works for publication.The main materials to be studied were sources in Russian and in English published mostly in 2010s and devoted to the problems of structuring works according to the meant above format. Besides, the present research considered the results of plagiarism tests (such tests used to be carried out at the Russia State Library within the period of 2013 – 2015 with the help of software “Automated system of specialized processing of textual documents”. The main methods of our research would remain structural and comparative analysis of texts.As a result, our research revealed the fact of inconsistency of the available information on the IMRAD structure. It would often demand deep thinking and explanations. Different authors of reference editions would as a rule differ one from another in their interpretation of the degree of necessity of this or that composition element, of the amount of details in descriptions, etc. Moreover, the very structure of scientific work looks differently for different authors. More often the structure supposes the integrity of the contents and its form, still sometimes its description would be replaced by outer elements, such as, for example, language clichés. The analysis of the most common faults in text structuring points that authors do not often have a clear idea of how to understand the different demands which are so obscurely described

  4. VISION OF THE FUTURE OF SCIENTIFIC AND TECHNICAL CLUBS ON THE UNIVERSITY PLATFORM: THE RESULTS OF FORESIGHT SESSION

    Directory of Open Access Journals (Sweden)

    Anna A. Maltseva

    2017-06-01

    Full Text Available Introduction: the paper presents the results of the study in the form of foresight session by correspondence. The purpose was to develop a road map to enhance the functioning of practice-oriented scientific and technical clubs for creative development of students and pupils (POSTC in the universities. The relevance of POSTC as objects of study indicated in the key programme documents at the Federal level. Materials and Methods: the methodological base of the study was Rapid Foresight technique allowing to reduce the resources of the foresight in case of its sufficiently high effectiveness. The foresight logic was formulated taking into account the multidimensional activities of POSTC. It included the following key com¬ponents: resources, activity and result. The “resources” group includes personnel, equipment and software, financing. The “activities” group describes some of the key aspects such as creation, training and motivation. Results: the analysis of the respondents’ answers to the questions of complex questionnaire and existing roadmaps on similar issues was made in terms of study. On the base of this analysis the time cards were created, and then the final roadmap of POSTC efficiency for the period 2017–2020 was created. The basis of the road map were the actions identified during the study as the factors of changing of the system of POSTC in universities. The key initiators and executors of the roadmap activities must be separate POSTC leaders, universities, federal executive authorities via Ministry of Education and Science of the Russian Federation and other interested structures. Discussion and Conclusions: the development of scientific and technical creativity of youth in a fundamentally new format is a topical problem of modern universities. It requires the purposeful administration and understanding of the development prospects by the management of the universities. Intensification of the universities activities on

  5. Scientific Misconduct.

    Science.gov (United States)

    Goodstein, David

    2002-01-01

    Explores scientific fraud, asserting that while few scientists actually falsify results, the field has become so competitive that many are misbehaving in other ways; an example would be unreasonable criticism by anonymous peer reviewers. (EV)

  6. Simple messages help set the record straight about scientific agreement on human-caused climate change: the results of two experiments.

    Directory of Open Access Journals (Sweden)

    Teresa A Myers

    Full Text Available Human-caused climate change is happening; nearly all climate scientists are convinced of this basic fact according to surveys of experts and reviews of the peer-reviewed literature. Yet, among the American public, there is widespread misunderstanding of this scientific consensus. In this paper, we report results from two experiments, conducted with national samples of American adults, that tested messages designed to convey the high level of agreement in the climate science community about human-caused climate change. The first experiment tested hypotheses about providing numeric versus non-numeric assertions concerning the level of scientific agreement. We found that numeric statements resulted in higher estimates of the scientific agreement. The second experiment tested the effect of eliciting respondents' estimates of scientific agreement prior to presenting them with a statement about the level of scientific agreement. Participants who estimated the level of agreement prior to being shown the corrective statement gave higher estimates of the scientific consensus than respondents who were not asked to estimate in advance, indicating that incorporating an "estimation and reveal" technique into public communication about scientific consensus may be effective. The interaction of messages with political ideology was also tested, and demonstrated that messages were approximately equally effective among liberals and conservatives. Implications for theory and practice are discussed.

  7. Evaluation of instrumental parameters for obtaining acceptable analytical results of the Dosimetry Laboratory of Chemistry of the Regional Center of Nuclear Sciences, CNEN-NE, Recife, Brazil

    International Nuclear Information System (INIS)

    Souza, V.L.B.; Figueiredo, M.D.C.; Cunha, M.S.

    2008-01-01

    Instrumental parameters need to be evaluated for obtaining acceptable analytical results for a specific instrument. The performance of the UV-VIS spectrophotometer can be verified for wavelengths and absorbances with appropriate materials (solutions of different concentrations of K 2 CrO 4 , for example). The aim of this work was to demonstrate the results of the procedures to control the quality of the measurements carried out in the laboratory in the last four years. The samples were analyzed in the spectrophotometer and control graphics were obtained for K 2 CrO 4 and Fe 3+ absorbance values. The variation in the results obtained for the stability of the spectrophotometer and for the control of its calibration did not exceed 2%. (author)

  8. Aircraft and ground vehicle friction correlation test results obtained under winter runway conditions during joint FAA/NASA Runway Friction Program

    Science.gov (United States)

    Yager, Thomas J.; Vogler, William A.; Baldasare, Paul

    1988-01-01

    Aircraft and ground vehicle friction data collected during the Joint FAA/NASA Runway Friction Program under winter runway conditions are discussed and test results are summarized. The relationship between the different ground vehicle friction measurements obtained on compacted snow- and ice-covered conditions is defined together with the correlation to aircraft tire friction performance under similar runway conditions.

  9. The use of scientific and technical results from underground research laboratory investigations for the geological disposal of radioactive waste

    International Nuclear Information System (INIS)

    2001-09-01

    The objective of the report is to provide information on the use of results obtained from underground research laboratory investigations for the development of a deep geological repository system for long lived and/or high level radioactive waste including spent fuel. Specifically, it should provide Member States that intend to start development of a geological disposal system with an overview of existing facilities and of the sorts and quality of results that have already been acquired. The report is structured into six main themes: rock characterization methodologies and testing; assessment of the geological barrier; assessment of the engineered barrier system; respository construction techniques; demonstration of repository operations; confidence building and international co-operation

  10. Most recent developments in combined radium and high voltage therapy of uterine tumours as shown by the results obtained at the municipal hospital Passau

    International Nuclear Information System (INIS)

    Moos, G.

    1987-01-01

    It was the aim of the study described here to review data on healing successes achieved in malignant changes of the uterus. The results obtained were analysed on the bais of tumour stage and, in particular, the radiation dose actually administered. It could be shown that the treatment results currently achieved at this clinic are in keeping with relevant patient data collected previously or by other centres. (orig./MG) [de

  11. Interobserver agreement of the injury diagnoses obtained by postmortem computed tomography of traffic fatality victims and a comparison with autopsy results

    DEFF Research Database (Denmark)

    Leth, Peter Mygind; Struckmann, Henrik; Lauritsen, Jens

    2013-01-01

    The present study investigated the interobserver variation between a radiologist and a forensic pathologist in 994 injury diagnoses obtained by postmortem computed tomography (CT) of 67 traffic fatality victims, and the results were compared with diagnoses obtained by autopsy. The injuries were...... system, but the pathologist diagnosed more organ injuries. We recommend the use of a radiologist as a consultant for the evaluation of postmortem CT images. Training in radiology should be included in forensic medicine postgraduate training. CT was superior to autopsy in detecting abnormal air...

  12. Scientific results and lessons learned from an integrated crewed Mars exploration simulation at the Rio Tinto Mars analogue site

    Science.gov (United States)

    Orgel, Csilla; Kereszturi, Ákos; Váczi, Tamás; Groemer, Gernot; Sattler, Birgit

    2014-02-01

    Between 15 and 25 April 2011 in the framework of the PolAres programme of the Austrian Space Forum, a five-day field test of the Aouda.X spacesuit simulator was conducted at the Rio Tinto Mars-analogue site in southern Spain. The field crew was supported by a full-scale Mission Control Center (MCC) in Innsbruck, Austria. The field telemetry data were relayed to the MCC, enabling a Remote Science Support (RSS) team to study field data in near-real-time and adjust the flight planning in a flexible manner. We report on the experiences in the field of robotics, geophysics (Ground Penetrating Radar) and geology as well as life sciences in a simulated spaceflight operational environment. Extravehicular Activity (EVA) maps had been prepared using Google Earth and aerial images. The Rio Tinto mining area offers an excellent location for Mars analogue simulations. It is recognised as a terrestrial Mars analogue site because of the presence of jarosite and related sulphates, which have been identified by the NASA Mars Exploration Rover "Opportunity" in the El Capitan region of Meridiani Planum on Mars. The acidic, high ferric-sulphate content water of Rio Tinto is also considered as a possible analogue in astrobiology regarding the analysis of ferric sulphate related biochemical pathways and produced biomarkers. During our Mars simulation, 18 different types of soil and rock samples were collected by the spacesuit tester. The Raman results confirm the presence of minerals expected, such as jarosite, different Fe oxides and oxi-hydroxides, pyrite and complex Mg and Ca sulphates. Eight science experiments were conducted in the field. In this contribution first we list the important findings during the management and realisation of tests, and also a first summary of the scientific results. Based on these experiences suggestions for future analogue work are also summarised. We finish with recommendations for future field missions, including the preparation of the experiments

  13. Comparative analysis of the results obtained by computer code ASTEC V2 and RELAP 5.3.2 for small leak ID 80 for VVER 1000

    International Nuclear Information System (INIS)

    Atanasova, B.; Grudev, P.

    2011-01-01

    The purpose of this report is to present the results obtained by simulation and subsequent analysis of emergency mode for small leak with ID 80 for WWER 1000/B320 - Kozloduy NPP Units 5 and 6. Calculations were performed with the ASTEC v2 computer code used for calculation of severe accident, which was designed by French and German groups - IRSN and GRS. Integral RELAP5 computer code is used as a reference for comparison of results. The analyzes are focused on the processes occurring in reactor internals phase of emergency mode with significant core damage. The main thermohydraulic parameters, start of reactor core degradation and subsequent fuel relocalization till reactor vessel failure are evaluated in the analysis. RELAP5 computer code is used as a reference code to compare the results obtained till early core degradation that occurs after core stripping and excising of fuel temperature above 1200 0 C

  14. Clinical and scientific results in perinatal care of pregnancy complicated by insulin dependent diabetes mellitus in Croatia.

    Science.gov (United States)

    Djelmis, J

    1998-01-01

    At the Department of Obstetrics and Gynecology, Perinatal Unit for Diabetes and Fetal Growth, School of Medicine, Zagreb, perinatal care of pregnancies complicated with insulin dependent diabetes melitus (IDDM), has been performed for more than 36 years. The intention of this review is to show our own results in the management of IDDM pregnancies and the latest clinical advances in perinatal care of such pregnancies. Pregnancy complicated with IDDM is at risk because of numerous maternal, fetal and neonatal complications. Recent advances in medicine, especially in diabetology and perinatology, helps clinician avoid or lessen antenatal or perinatal complications in IDDM pregnancies. The main result of improved perinatal care is that today fetal and neonatal mortality in IDDM pregnancy is almost equal to that of healthy pregnant population. Intensive preconceptual care and optimal regulation of IDDM have resulted not only in decreased perinatal mortality but also in a decreased rate of congenital malformation. Tight glycemia control during pregnancy has a beneficial effect on fetal growth. Intensive control of fetal growth, verification of lung maturation at term by amniocenthesis, and control of fetal oxygenation will result in delivery of a mature eutrophic newborn with the lowest rate of neonatal complications possible. Perinatal mortality of less than 2% in IDDM pregnancy can be obtained by planned delivery between 38 and 39 weeks of gestation by either vaginal route or cesarean section, depending on indications. After delivery, intensive care of the newborn is necessary.

  15. Fermentation Results and Chemical Composition of Agricultural Distillates Obtained from Rye and Barley Grains and the Corresponding Malts as a Source of Amylolytic Enzymes and Starch.

    Science.gov (United States)

    Balcerek, Maria; Pielech-Przybylska, Katarzyna; Dziekońska-Kubczak, Urszula; Patelski, Piotr; Strąk, Ewelina

    2016-10-01

    The objective of this study was to determine the efficiency of rye and barley starch hydrolysis in mashing processes using cereal malts as a source of amylolytic enzymes and starch, and to establish the volatile profile of the obtained agricultural distillates. In addition, the effects of the pretreatment method of unmalted cereal grains on the physicochemical composition of the prepared mashes, fermentation results, and the composition of the obtained distillates were investigated. The raw materials used were unmalted rye and barley grains, as well as the corresponding malts. All experiments were first performed on a semi-technical scale, and then verified under industrial conditions in a Polish distillery. The fermentable sugars present in sweet mashes mostly consisted of maltose, followed by glucose and maltotriose. Pressure-thermal treatment of unmalted cereals, and especially rye grains, resulted in higher ethanol content in mashes in comparison with samples subjected to pressureless liberation of starch. All agricultural distillates originating from mashes containing rye and barley grains and the corresponding malts were characterized by low concentrations of undesirable compounds, such as acetaldehyde and methanol. The distillates obtained under industrial conditions contained lower concentrations of higher alcohols (apart from 1-propanol) than those obtained on a semi-technical scale.

  16. Fermentation Results and Chemical Composition of Agricultural Distillates Obtained from Rye and Barley Grains and the Corresponding Malts as a Source of Amylolytic Enzymes and Starch

    Directory of Open Access Journals (Sweden)

    Maria Balcerek

    2016-10-01

    Full Text Available The objective of this study was to determine the efficiency of rye and barley starch hydrolysis in mashing processes using cereal malts as a source of amylolytic enzymes and starch, and to establish the volatile profile of the obtained agricultural distillates. In addition, the effects of the pretreatment method of unmalted cereal grains on the physicochemical composition of the prepared mashes, fermentation results, and the composition of the obtained distillates were investigated. The raw materials used were unmalted rye and barley grains, as well as the corresponding malts. All experiments were first performed on a semi-technical scale, and then verified under industrial conditions in a Polish distillery. The fermentable sugars present in sweet mashes mostly consisted of maltose, followed by glucose and maltotriose. Pressure-thermal treatment of unmalted cereals, and especially rye grains, resulted in higher ethanol content in mashes in comparison with samples subjected to pressureless liberation of starch. All agricultural distillates originating from mashes containing rye and barley grains and the corresponding malts were characterized by low concentrations of undesirable compounds, such as acetaldehyde and methanol. The distillates obtained under industrial conditions contained lower concentrations of higher alcohols (apart from 1-propanol than those obtained on a semi-technical scale.

  17. LEP and results obtained by DELPHI after four years of operation; LEP i wyniki uzyskane przez DELPHI po czterech latach dzialania

    Energy Technology Data Exchange (ETDEWEB)

    Blocki, J. [Warsaw Univ. (Poland). Inst. Fizyki Doswiadczalnej; Brueckman de Renstrom, P.; Budziak, A. [Institute of Nuclear Physics, Cracow (Poland)] [and others

    1993-10-01

    We characterize the most important problems of modern elementary particles physics, for the solution of which the LEP (Large Electron Positron) accelerator was built. We present the characteristics of this accelerator. The structure and properties of the DELPHI detector are described with special emphasis on the contribution of Polish groups. The most important results obtained so far in the LEP accelerator are discussed. (author). 12 refs, 17 figs, 1 tab.

  18. Carbon and nitrogen determination in Zr by photon or proton activation analysis. Comparison between the results obtained by this method and other analytical techniques

    International Nuclear Information System (INIS)

    Petit, J.; Gosset, J.; Engelmann, C.

    1977-01-01

    Carbon and nitrogen are determined by the following nuclear reactions: 12 C(γ,n) 11 C and 14 N(p,α) 11 C. The performances of the method and the main interferences are considered. The process developed for the separation of carbon-11 from zirconium is described and its efficiency evaluated. The results obtained are compared with those given by different laboratories using various analytical techniques [fr

  19. Scientific activity and working hours of physicians in university hospitals: results from the Innsbruck and Salzburg physician lifestyle assessment (TISPLA).

    Science.gov (United States)

    Steger, Bernhard; Colvin, Hans Peter; Rieder, Josef

    2009-01-01

    Controllable lifestyle has become an important factor influencing career decision-making among physicians. In academic medicine, doctors are required to combine both patient care and research in their daily routine. Insufficient release of clinicians for research during contracted work hours may lead to increased weekly working hours in academic medical centers and deter medical graduates from academia. We tested for an association between numbers of scientific publications and an increased hourly workload among physicians. This was a cross-sectional online survey among all salaried physicians working in the university hospitals of Innsbruck and Salzburg, Austria. The main outcome measures were the self-reported total number of scientific papers published in peer-reviewed medical journals over the past two years and self-reported working hours. Of 590 returned surveys, 393 were fully completed and included in the study. The sample was stratified into three groups according to scientific output in the past two years: Group A, >/= 6 publications; Group B, 1-5 publications; Group C, no publications. Men were more likely than women to have a scientific publication: in Group A there was a male predominance of 75%, whereas in Group C only 48% were men (P = 0.0034). A total of 59% (n = 232) of all participants had not published a scientific article in the past two years (Group C) and worked a mean of 58.3 +/- 12 h/week. Physicians in Group B (n = 113) had published 2.4 +/- 1.4 papers and worked 62.8 +/- 12.9 h/week; those in Group A (n = 48) had published 11.5 +/- 6.6 papers and worked 73 +/- 13.1 h/week (P work time but for 60% of overtime hours, reflecting the fact that research was mainly performed during overtime. Research activity among clinicians in academic medical centers is associated with significantly increased overtime hours. Measures need to be taken to allow medical graduates an academic career at reasonable impairment of personal lifestyle.

  20. [Quality and integrity in the production and publication of scientific results: data trimming, manipulation and (self) plagiarism].

    Science.gov (United States)

    Lüscher, T F

    2014-08-01

    The publication of scientific manuscripts is an essential part in the research process and in the attempt to produce novel knowledge: only what is published exists. It is the aim of research to produce reproducible and sustainable knowledge. Reproducible knowledge is based on precise observation, the use of modern methodologies and an appropriate statistical analysis. As a consequence, it must be the intention of any scientist to report the truth and nothing but the truth. This principle requires precision and honesty. Deviation from such a behavior may lead to scientific misconduct: It encompasses the use of inappropriate methods and/or statistics, double publication of data, sloppy data presentation and processing, up to data massaging, manipulation, data theft or fabrication. Famous examples can be found throughout the history of research but it appears that such behavior has recently become more common possibly due to excessive competition, the crucial role of grants for scientific productivity and funding as well as promotion. Accordingly, in the training of researchers it seems essential to emphasize the importance of precise data acquisition and analysis to ascertain reproducible data. Similarly, it must be assured that data sets are only published once, that authors have contributed technically and/or intellectually in an important manner and that the work of other scientists is cited appropriately. Editors and reviewers should carefully assess the quality of submitted manuscripts. In fact, it is the aim of the peer review process to assure as much as possible that the quality of submitted manuscripts meets current methodological as well as ethical standards.

  1. Comparative Results of AIRS/AMSU and CrIS/ATMS Retrievals Using a Scientifically Equivalent Retrieval Algorithm

    Science.gov (United States)

    Susskind, Joel; Kouvaris, Louis; Iredell, Lena

    2016-01-01

    The AIRS Science Team Version-6 retrieval algorithm is currently producing high quality level-3 Climate Data Records (CDRs) from AIRS/AMSU which are critical for understanding climate processes. The AIRS Science Team is finalizing an improved Version-7 retrieval algorithm to reprocess all old and future AIRS data. AIRS CDRs should eventually cover the period September 2002 through at least 2020. CrIS/ATMS is the only scheduled follow on to AIRS/AMSU. The objective of this research is to prepare for generation of long term CrIS/ATMS CDRs using a retrieval algorithm that is scientifically equivalent to AIRS/AMSU Version-7.

  2. Comparative Results of AIRS AMSU and CrIS/ATMS Retrievals Using a Scientifically Equivalent Retrieval Algorithm

    Science.gov (United States)

    Susskind, Joel; Kouvaris, Louis; Iredell, Lena

    2016-01-01

    The AIRS Science Team Version 6 retrieval algorithm is currently producing high quality level-3 Climate Data Records (CDRs) from AIRSAMSU which are critical for understanding climate processes. The AIRS Science Team is finalizing an improved Version-7 retrieval algorithm to reprocess all old and future AIRS data. AIRS CDRs should eventually cover the period September 2002 through at least 2020. CrISATMS is the only scheduled follow on to AIRSAMSU. The objective of this research is to prepare for generation of a long term CrISATMS level-3 data using a finalized retrieval algorithm that is scientifically equivalent to AIRSAMSU Version-7.

  3. Comparison between two sampling methods by results obtained using petrographic techniques, specially developed for minerals of the Itataia uranium phosphate deposit, Ceara, Brazil

    International Nuclear Information System (INIS)

    Salas, H.T.; Murta, R.L.L.

    1985-01-01

    The results of comparison of two sampling methods applied to a gallery of the uranium-phosphate ore body of Itataia-Ceara State, Brazil, along 235 metres of mineralized zone, are presented. The results were obtained through petrographic techniques especially developed and applied to both samplings. In the first one it was studied hand samples from a systematically sampling made at intervals of 2 metres. After that, the estimated mineralogical composition studies were carried out. Some petrogenetic observations were for the first time verified. The second sampling was made at intervals of 20 metres and 570 tons of ore extracted and distributed in sections and a sample representing each section was studied after crushing at -65. Their mineralogy were quantified and the degree of liberation of apatite calculated. Based on the mineralogical data obtained it was possible to represent both samplings and to make the comparison of the main mineralogical groups (phosphates, carbonates and silicates). In spite of utilizing different methods and methodology and the kind of mineralization, stockwork, being quite irregular, the results were satisfactory. (Author) [pt

  4. Warm magnetic measurements of MCBCs: comparison between the results obtained with the Quadrupole Industrial Magnetic Measurement and the Corrector Industrial Magnetic Measurement systems

    CERN Document Server

    Remondino, Vittorio; Catalan-Lasheras, N

    2005-01-01

    MCBCs modules are first magnetically measured at Tesla using a second-generation Corrector Industrial Magnetic Measurement (CIMM). After assembly into the SSS quadrupoles, measurements are repeated at CERN using the Quadrupole Industrial Magnetic Measurement (QIMM) system. In this note, we compare the measurements provided by the two systems. In all the 18 cases examined, the correlation found is excellent. The consistency of the results obtained indicates that both systems are effective, that modules are correctly measured by the firm personnel and that magnetic characteristics of the modules do not change during their assembly in cold masses.

  5. Incorporating Cutting Edge Scientific Results from the Margins-Geoprisms Program into the Undergraduate Curriculum: The Subduction Factory

    Science.gov (United States)

    Penniston-Dorland, S.; Stern, R. J.; Edwards, B. R.; Kincaid, C. R.

    2014-12-01

    The NSF-MARGINS Program funded a decade of research on continental margin processes. The NSF-GeoPRISMS Mini-lesson Project, funded by NSF-TUES, is designed to integrate fundamental results from the MARGINS program into open-source college-level curriculum. Three Subduction Factory (SubFac) mini-lessons were developed as part of this project. These include hands-on examinations of data sets representing 3 key components of the subduction zone system: 1) Heat transfer in the subducted slab; 2) Metamorphic processes happening at the plate interface; and 3) Typical magmatic products of arc systems above subduction zones. Module 1: "Slab Temperatures Control Melting in Subduction Zones, What Controls Slab Temperature?" allows students to work in groups using beads rolling down slopes as an analog for the mathematics of heat flow. Using this hands-on, exploration-based approach, students develop an intuition for the mathematics of heatflow and learn about heat conduction and advection in the subduction zone environment. Module 2: "Subduction zone metamorphism" introduces students to the metamorphic rocks that form as the subducted slab descends and the mineral reactions that characterize subduction-related metamorphism. This module includes a suite of metamorphic rocks available for instructors to use in a lab, and exercises in which students compare pressure-temperature estimates obtained from metamorphic rocks to predictions from thermal models. Module 3: "Central American Arc Volcanoes, Petrology and Geochemistry" introduces students to basic concepts in igneous petrology using the Central American volcanic arc, a MARGINS Subduction Factory focus site, as an example. The module relates data from two different volcanoes - basaltic Cerro Negro (Nicaragua) and andesitic Ilopango (El Salvador) including hand sample observations and major element geochemistry - to explore processes of mantle and crustal melting and differentiation in arc volcanism.

  6. Comparison of visual field test results obtained through Humphrey matrix frequency doubling technology perimetry versus standard automated perimetry in healthy children

    Directory of Open Access Journals (Sweden)

    Sibel Kocabeyoglu

    2013-01-01

    Full Text Available Aims : The aim of this study was to compare the visual field test results in healthy children obtained via the Humphrey matrix 24-2 threshold program and standard automated perimetry (SAP using the Swedish interactive threshold algorithm (SITA-Standard 24-2 test. Materials and Methods: This prospective study included 55 healthy children without ocular or systemic disorders who underwent both SAP and frequency doubling technology (FDT perimetry visual field testing. Visual field test reliability indices, test duration, global indices (mean deviation [MD], and pattern standard deviation [PSD] were compared between the 2 tests using the Wilcoxon signed-rank test and paired t-test. The performance of the Humphrey field analyzer (HFA 24-2 SITA-standard and frequency-doubling technology Matrix 24-2 tests between genders were compared with Mann-Whitney U-test. Results: Fifty-five healthy children with a mean age of 12.2 ± 1.9 years (range from 8 years to 16 years were included in this prospective study. The test durations of SAP and FDT were similar (5.2 ± 0.5 and 5.1 ± 0.2 min, respectively, P = 0.651. MD and the PSD values obtained via FDT Matrix were significantly higher than those obtained via SAP (P < 0.001, and fixation losses and false negative errors were significantly less with SAP (P < 0.05. A weak positive correlation between the two tests in terms of MD (r = 0.352, P = 0.008 and PSD (r = 0.329, P = 0.014 was observed. Conclusion: Children were able to complete both the visual test algorithms successfully within 6 min. However, SAP testing appears to be associated with less depression of the visual field indices of healthy children. FDT Matrix and SAP should not be used interchangeably in the follow-up of children.

  7. Determination of residual stresses in steel 20 comparison of the results obtained by the Barkhausen noise and X-ray diffraction

    International Nuclear Information System (INIS)

    Fernandez, L. M.; Herrera, V.; Suarez, J.C.; Merino, F.J.

    1997-01-01

    During a heat treatment (quenching, surface hardening, Thermochemical treatment) the metallic alloys undergo temperature variations and phase transformation. The resulting changes give rise to internal stresses in the piece. Phase transformation modifies the thermomechanical behavior of the material through the change of mechanical properties ( hardness, fatigue-behaviour, corrosion resistance, electric resistivity, etc.) The aim of this paper is residual stress measurements in specimens of steel-20 submitted to different heat treatment, by two non destructive methods: Barkhausen and X-ray diffraction. Brakhausen Effects utilizes the magnetic properties of ferromagnetic materials such as ferritic and perlitic steels and provides a practical tool for surface streets evaluation. X-ray streets analysis is based on the measurement of lattice strains in different directions of specimen The results obtained by two techniques are compared, avowing a good agreement

  8. Obtainment of tantalum oxide from national ores

    International Nuclear Information System (INIS)

    Pinatti, D.G.; Ribeiro, S.; Martins, A.H.

    1988-01-01

    The experimental results of tantalum oxides (Ta 2 O 5 ) obtainment from Brazilian ores of tantalite and columbite are described. This study is a part of the technologic and scientific research design of refractory metals (Ti, Zr, Hf, V, Nb, Ta, Cr, Mo and W) and correlate ceramics. (C.G.C.) [pt

  9. Soil scientific survey of 220/38 kV cable circuits of the power station 'Eemscentrale' in the Dutch province Groningen; Theoretical backgrounds, research method and results

    International Nuclear Information System (INIS)

    Langevoord, J.; Van Loon, L.J.M.

    1995-01-01

    Recently, five underground cable circuits were completed at the site of the EPON (an energy utility for the north-eastern part of the Netherlands) title power station, consisting of two 220 kV and two 380 kV connections with a total length of 24 km. Soil scientific in situ investigations and laboratory tests were carried out in advance to collect data, on the basis of which thermal resistivity and critical thermal conditions could be calculated. It was demonstrated by the calculated results that no de-hydrated zones occurred around the cable for design criteria conditions. Optimal cable bed conditions could be achieved, using some of the sand excavated from the trench. In this article, attention will be paid to theoretical aspects of heat transfer of cables for underground electricity transport, the research method of the soil scientific survey, and the results of the survey for the design of the cable connection, to be made by NKF (cable manufacturer) and for the final execution of the cable design. In the second article, to be published in a next issue of this magazine, attention will be paid to soil scientific marginal conditions and soil scientific supervision during the realization. 9 figs., 6 tabs., 9 refs

  10. Comparison of visual field test results obtained through Humphrey matrix frequency doubling technology perimetry versus standard automated perimetry in healthy children.

    Science.gov (United States)

    Kocabeyoglu, Sibel; Uzun, Salih; Mocan, Mehmet Cem; Bozkurt, Banu; Irkec, Murat; Orhan, Mehmet

    2013-10-01

    The aim of this study was to compare the visual field test results in healthy children obtained via the Humphrey matrix 24-2 threshold program and standard automated perimetry (SAP) using the Swedish interactive threshold algorithm (SITA)-Standard 24-2 test. This prospective study included 55 healthy children without ocular or systemic disorders who underwent both SAP and frequency doubling technology (FDT) perimetry visual field testing. Visual field test reliability indices, test duration, global indices (mean deviation [MD], and pattern standard deviation [PSD]) were compared between the 2 tests using the Wilcoxon signed-rank test and paired t-test. The performance of the Humphrey field analyzer (HFA) 24-2 SITA-standard and frequency-doubling technology Matrix 24-2 tests between genders were compared with Mann-Whitney U-test. Fifty-five healthy children with a mean age of 12.2 ± 1.9 years (range from 8 years to 16 years) were included in this prospective study. The test durations of SAP and FDT were similar (5.2 ± 0.5 and 5.1 ± 0.2 min, respectively, P = 0.651). MD and the PSD values obtained via FDT Matrix were significantly higher than those obtained via SAP (P tests in terms of MD (r = 0.352, P = 0.008) and PSD (r = 0.329, P = 0.014) was observed. Children were able to complete both the visual test algorithms successfully within 6 min. However, SAP testing appears to be associated with less depression of the visual field indices of healthy children. FDT Matrix and SAP should not be used interchangeably in the follow-up of children.

  11. An Overview of Scientific and Space Weather Results from the Communication/Navigation Outage Forecasting System (C/NOFS) Mission

    Science.gov (United States)

    Pfaff, R.; de la Beaujardiere, O.; Hunton, D.; Heelis, R.; Earle, G.; Strauss, P.; Bernhardt, P.

    2012-01-01

    The Communication/Navigation Outage Forecasting System (C/NOFS) Mission of the Air Force Research Laboratory is described. C/NOFS science objectives may be organized into three categories: (1) to understand physical processes active in the background ionosphere and thermosphere in which plasma instabilities grow; (2) to identify mechanisms that trigger or quench the plasma irregularities responsible for signal degradation; and (3) to determine how the plasma irregularities affect the propagation of electromagnetic waves. The satellite was launched in April, 2008 into a low inclination (13 deg), elliptical (400 x 850 km) orbit. The satellite sensors measure the following parameters in situ: ambient and fluctuating electron densities, AC and DC electric and magnetic fields, ion drifts and large scale ion composition, ion and electron temperatures, and neutral winds. C/NOFS is also equipped with a GPS occultation receiver and a radio beacon. In addition to the satellite sensors, complementary ground-based measurements, theory, and advanced modeling techniques are also important parts of the mission. We report scientific and space weather highlights of the mission after nearly four years in orbit

  12. Development of the safety evaluation system in the respects of organizational factors and workers' consciousness. Pt. 1. Study of validities of functions for necessary evaluation and results obtained

    International Nuclear Information System (INIS)

    Takano, Kenichi; Tsuge, Tadafumi; Hasegawa, Naoko; Hirose, Ayako; Sasou, Kunihide

    2002-01-01

    CRIEPI decided to develop the safety evaluation system to investigate the safety level of the industrial sites due to questionnaires of organizational climate, safety managements, and workers' safety consciousness to workers. This report describes the questionnaire survey to apply to the domestic nuclear power plant for using obtained results as a fundamental data in order to construct the safety evaluation system. This system will be used for promoting safety culture in organizations of nuclear power plants. The questionnaire survey was conducted to 14 nuclear power stations for understanding the present status relating to safety issues. This questionnaire involves 122 items classified into following three categories: (1) safety awareness and behavior of plant personnel; (2) safety management; (3) organizational climate, based on the model considering contributing factor groups to safety culture. Obtained results were analyzed by statistical method to prepare functions of evaluation. Additionally, by applying a multivariate analysis, it was possible to extract several crucial factors influencing safety performance and to find a comprehensive safety indicator representing total organizational safety level. Significant relations were identified between accident rates (both labor accidents and facility failures) and above comprehensive safety indicator. Next, 122 questionnaire items were classified into 20 major safety factors to grasp the safety profiles of each site. This profile is considered as indicating the features of each site and also indicating the direction of progress for improvement of safety situation in the site. These findings can be reflected in developing the safety evaluation system, by confirming the validity of the evaluation method and giving specific functions. (author)

  13. Lactation curves and economic results of Saanen goats fed increasing dietary energy levels obtained by the addition of calcium salts of fatty acids

    Directory of Open Access Journals (Sweden)

    Rodrigo de Souza

    2014-02-01

    Full Text Available The objective of this study was to evaluate the use of calcium salts of fatty acids (CSFA to increase the dietary energy levels for Saanen goats and their effects on the lactation curve, dry matter intake, body weight, and economic results of the goats. Twenty multiparous goats, weighing an average of 63.5±10.3 kg, were randomly assigned to one of four treatment groups, each receiving one of the following dietary energy levels: a control diet consisting of 2.6 Mcal of metabolizable energy per kg of dry matter (Mcal ME/kg DM or a test diet supplemented with CSFA (Lactoplus® to obtain 2.7, 2.8, or 2.9 Mcal ME/kg DM. Goats were housed in individual stalls and were fed and milked twice daily. The animals were evaluated until 180 days in milk by measuring dry matter intake and milk yield. These measurements were used to calculate feed efficiencies and the cost-benefit ratio of diet and lactation curves using Wood's nonlinear model. Increasing dietary energy levels showed no effect on body weight. Supplementation with CSFA did not limit dry matter intake; however, it changed the shape of the lactation curve by promoting a late peak lactation with a longer duration. Milk yields at 180 days in milk had a quadratic increase with a maximum energy level at 2.85 Mcal ME/kg DM. Increasing the dietary energy level for Saanen goats using CSFA changes their lactation curves, with the best milk production achieved with a 2.85 Mcal ME/kg DM diet; however, the greatest economic results were obtained with a 2.7 Mcal ME/kg DM diet.

  14. Recent Advances in Solid Catalysts Obtained by Metalloporphyrins Immobilization on Layered Anionic Exchangers: A Short Review and Some New Catalytic Results

    Directory of Open Access Journals (Sweden)

    Shirley Nakagaki

    2016-02-01

    Full Text Available Layered materials are a very interesting class of compounds obtained by stacking of two-dimensional layers along the basal axis. A remarkable property of these materials is their capacity to interact with a variety of chemical species, irrespective of their charge (neutral, cationic or anionic. These species can be grafted onto the surface of the layered materials or intercalated between the layers, to expand or contract the interlayer distance. Metalloporphyrins, which are typically soluble oxidation catalysts, are examples of molecules that can interact with layered materials. This work presents a short review of the studies involving metalloporphyrin immobilization on two different anionic exchangers, Layered Double Hydroxides (LDHs and Layered Hydroxide Salts (LHSs, published over the past year. After immobilization of anionic porphyrins, the resulting solids behave as reusable catalysts for heterogeneous oxidation processes. Although a large number of publications involving metalloporphyrin immobilization on LDHs exist, only a few papers have dealt with LHSs as supports, so metalloporphyrins immobilized on LHSs represent a new and promising research field. This work also describes new results on an anionic manganese porphyrin (MnP immobilized on Mg/Al-LDH solids with different nominal Mg/Al molar ratios (2:1, 3:1 and 4:1 and intercalated with different anions (CO32− or NO3−. The influence of the support composition on the MnP immobilization rates and the catalytic performance of the resulting solid in cyclooctene oxidation reactions will be reported.

  15. Assessment of the variations in fat content in normal liver using a fast MR imaging method in comparison with results obtained by spectroscopic imaging

    International Nuclear Information System (INIS)

    Irwan, Roy; Edens, Mireille A.; Sijens, Paul E.

    2008-01-01

    A recently published Dixon-based MRI method for quantifying liver fat content using dual-echo breath-hold gradient echo imaging was validated by phantom experiments and compared with results of biopsy in two patients (Radiology 2005;237:1048-1055). We applied this method in ten healthy volunteers and compared the outcomes with the results of MR spectroscopy (MRS), the gold standard in quantifying liver fat content. Novel was the use of spectroscopic imaging yielding the variations in fat content across the liver rather than a single value obtained by single voxel MRS. Compared with the results of MRS, liver fat content according to MRI was too high in nine subjects (range 3.3-10.7% vs. 0.9-7.7%) and correct in one (21.1 vs. 21.3%). Furthermore, in one of the ten subjects the MRI fat content according to the Dixon-based MRI method was incorrect due to a (100-x) versus x percent lipid content mix-up. The second problem was fixed by a minor adjustment of the MRI algorithm. Despite systematic overestimation of liver fat contents by MRI, Spearman's correlation between the adjusted MRI liver fat contents with MRS was high (r = 0.927, P < 0.001). Even after correction of the algorithm, the problem remaining with the Dixon-based MRI method for the assessment of liver fat content,is that, at the lower end range, liver fat content is systematically overestimated by 4%. (orig.)

  16. Recent Advances in Solid Catalysts Obtained by Metalloporphyrins Immobilization on Layered Anionic Exchangers: A Short Review and Some New Catalytic Results.

    Science.gov (United States)

    Nakagaki, Shirley; Mantovani, Karen Mary; Machado, Guilherme Sippel; Castro, Kelly Aparecida Dias de Freitas; Wypych, Fernando

    2016-02-29

    Layered materials are a very interesting class of compounds obtained by stacking of two-dimensional layers along the basal axis. A remarkable property of these materials is their capacity to interact with a variety of chemical species, irrespective of their charge (neutral, cationic or anionic). These species can be grafted onto the surface of the layered materials or intercalated between the layers, to expand or contract the interlayer distance. Metalloporphyrins, which are typically soluble oxidation catalysts, are examples of molecules that can interact with layered materials. This work presents a short review of the studies involving metalloporphyrin immobilization on two different anionic exchangers, Layered Double Hydroxides (LDHs) and Layered Hydroxide Salts (LHSs), published over the past year. After immobilization of anionic porphyrins, the resulting solids behave as reusable catalysts for heterogeneous oxidation processes. Although a large number of publications involving metalloporphyrin immobilization on LDHs exist, only a few papers have dealt with LHSs as supports, so metalloporphyrins immobilized on LHSs represent a new and promising research field. This work also describes new results on an anionic manganese porphyrin (MnP) immobilized on Mg/Al-LDH solids with different nominal Mg/Al molar ratios (2:1, 3:1 and 4:1) and intercalated with different anions (CO₃(2-) or NO₃(-)). The influence of the support composition on the MnP immobilization rates and the catalytic performance of the resulting solid in cyclooctene oxidation reactions will be reported.

  17. Comparison of Hematologic and Biochemical Test Results in Blood Samples Obtained by Jugular Venipuncture Versus Nail Clip in Moluccan Cockatoos (Cacatua moluccensis).

    Science.gov (United States)

    Bennett, Tracy D; Lejnieks, Daniel V; Koepke, Hoyt; Grimson, Fiona; Szucs, Jennifer; Omaits, Kerri; Lane, Rosalie

    2015-12-01

    In birds, blood samples are often collected from the jugular, medial metatarsal, and basilic vein. Samples are sometimes collected by toe nail clip, but concerns to avoid drawing blood from the nail include pain after nail clips for blood collection, potential differences in complete blood count (CBC) results, and potential contamination with uric acid values. To compare differences in biochemical and hematologic values in blood samples obtained by jugular venipuncture versus toenail clip, blood samples were collected from Moluccan cockatoos (Cacatua moluccensis) (N = 23) and sent to a commercial laboratory for routine CBCs and serum biochemical analysis. Results showed good agreement between venipuncture and nail clip blood samples in red blood cell count, packed cell volume, heterophil count and percentage, lymphocyte count and percentage, aspartate aminotransferase, chloride, creatine phosphokinase, glucose, lactate dehydrogenase, total protein, and uric acid values. Constant bias was found in values of bile acids, cholesterol, and hemoglobin. Proportional bias toward higher values in the jugular sample were found in total white blood cell (WBC) count and inorganic phosphorus. Serum calcium plots revealed a proportional bias toward higher values in the toe nail blood when values were increased. Results suggest some differences in WBC count, bile acids, calcium, cholesterol, hemoglobin, and phosphorus values between blood samples collected by jugular venipuncture and samples collected by toe nail clip, but the differences are mostly minor and, with the possible exception of inorganic phosphorus and marginally elevated or very low WBC counts, are unlikely to affect the use or interpretation of the avian blood panel.

  18. A review of experimental results obtained in Au-Au collisions at the RHIC-BNL energies using BRAHMS experimental set-up

    International Nuclear Information System (INIS)

    Jipa, Alexandru

    2003-01-01

    Ultrarelativistic heavy ion collisions are useful tools to investigate highly excited dense nuclear matter. At sufficiently high temperature, nuclear matter is expected to undergo a phase transition to quark-gluon plasma. Therefore, new experiments have been proposed to investigate the behaviour of the highly excited dense nuclear matter. One of the experiments performed at the Relativistic Heavy Ion Collider from Brookhaven National Laboratory is the BRAHMS Experiment. In the three running years many experimental data have been obtained. These data permitted to establish significant experimental results on charged pion, charged kaon, proton and antiproton production in Au-Au collisions at 130 A GeV and 200 A GeV in CMS. The present work summarizes the main experimental results on charged particle multiplicities, rapidity distributions, momentum spectra, antiparticle to particle ratios and connects these results with some interesting physical quantities. Their dependencies on the available energies in the CMS in similar collisions are included. Interesting behaviours with the increase of this energy are reported. The most interesting are related to the behaviour of the antiproton to proton ratio on the collision centrality and on the available energy in the centre of mass system, the strangeness production, Coulomb repulsion and slope parameters of the momentum spectra. A few new steps in the knowledge of the behaviour of the highly excited and dense nuclear matter can be reported. (authors)

  19. Some Results on Sea Ice Rheology for the Seasonal Ice Zone, Obtained from the Deformation Field of Sea Ice Drift Pattern

    Science.gov (United States)

    Toyota, T.; Kimura, N.

    2017-12-01

    Sea ice rheology which relates sea ice stress to the large-scale deformation of the ice cover has been a big issue to numerical sea ice modelling. At present the treatment of internal stress within sea ice area is based mostly on the rheology formulated by Hibler (1979), where the whole sea ice area behaves like an isotropic and plastic matter under the ordinary stress with the yield curve given by an ellipse with an aspect ratio (e) of 2, irrespective of sea ice area and horizontal resolution of the model. However, this formulation was initially developed to reproduce the seasonal variation of the perennial ice in the Arctic Ocean. As for its applicability to the seasonal ice zones (SIZ), where various types of sea ice are present, it still needs validation from observational data. In this study, the validity of this rheology was examined for the Sea of Okhotsk ice, typical of the SIZ, based on the AMSR-derived ice drift pattern in comparison with the result obtained for the Beaufort Sea. To examine the dependence on a horizontal scale, the coastal radar data operated near the Hokkaido coast, Japan, were also used. Ice drift pattern was obtained by a maximum cross-correlation method with grid spacings of 37.5 km from the 89 GHz brightness temperature of AMSR-E for the entire Sea of Okhotsk and the Beaufort Sea and 1.3 km from the coastal radar for the near-shore Sea of Okhotsk. The validity of this rheology was investigated from a standpoint of work rate done by deformation field, following the theory of Rothrock (1975). In analysis, the relative rates of convergence were compared between theory and observation to check the shape of yield curve, and the strain ellipse at each grid cell was estimated to see the horizontal variation of deformation field. The result shows that the ellipse of e=1.7-2.0 as the yield curve represents the observed relative conversion rates well for all the ice areas. Since this result corresponds with the yield criterion by Tresca and

  20. On the influence of infiltration of radioactive beds by flushing fluid on γ-ray logging results obtained from uranium deposit No. 387

    International Nuclear Information System (INIS)

    Ren Bingxiang; Zhang Yuechun; Ai Shuyi.

    1985-01-01

    A large number of field logging data obtained during the course of exploration on uranium deposit No. 387 show when the radioactive beds are encountered by drill holes and the drilling continues the γ-ray intensity decreases. It is considered that the escape of emanation does not considerably influence the logging results. Therefore, based upon the experiment of immerseing ores in fluid and geological and hydrogeological data of the deposit, the hypotheses that the γ-ray intensity in drill hole is closely related with the infiltration of flushing fluid is suggested. The ore bodies are strictly controlled by faults. Most of the uranium and thorium are absorbed by pelitic-carbonaceous cements or fill the porous spaces in structural breccia and cataclasite. They are easy to dissolve in water. Moreover, the ore-bearing structures are the unique water aquifers which is under pressure. As the level of flushing fluid is higher than the pressure head so it continuously pours into the ore-bearing beds, resulting in the infiltration of U and Ra. Consequently, the radioactivity detected is low

  1. Answers to the questions about food irradiation. Concerning results of animal experiments in the specified integrated research. Data carrying a problem in human health were obtained?

    International Nuclear Information System (INIS)

    Ito, Hitoshi

    2007-01-01

    Experts of Food and Agriculture Organization (FAO)/ International Atomic Energy Agency (IAEA)/ World Health Organization (WHO) committee obtained their conclusion in 1980 that food irradiated with <10 kGy of radiation is safe for human health, which is now globally approved. However, in Japan, there have been still opposite opinions based on the doubt in the title on the safety of irradiated food. In this paper, the author answers those questions as he was a member to arrange the Research in the title for food irradiation. Described are data presentation and explanation about results of toxicity studies of diets added with irradiated materials of: weight reductions in rat ovary by irradiated potato (ip) in chronic studies, and in mouse testicle and ovary of F3 generation from the ancestor mice kept on diet with irradiated onion (io); bone malformation in mice by io; and reduction of body weight gain in female rats by ip and increase of mortality of male rats by ip. These are analyzed on the aspects of radiation dose-response, sustained tendency of results throughout the living period or generation, and apparent abnormality by other factors; and normal variation due to individual difference is pointed out to contribute to these findings. The safety test of irradiated food has been conducted valid not only in animal experiments but also other tests like genotoxicity and analysis of radiation-degraded products. (R.T.)

  2. A comparison of two methods for prediction of response and rates of inbreeding in selected populations with the results obtained in two selection experiments

    Directory of Open Access Journals (Sweden)

    Verrier Etienne

    2005-05-01

    Full Text Available Abstract Selection programmes are mainly concerned with increasing genetic gain. However, short-term progress should not be obtained at the expense of the within-population genetic variability. Different prediction models for the evolution within a small population of the genetic mean of a selected trait, its genetic variance and its inbreeding have been developed but have mainly been validated through Monte Carlo simulation studies. The purpose of this study was to compare theoretical predictions to experimental results. Two deterministic methods were considered, both grounded on a polygenic additive model. Differences between theoretical predictions and experimental results arise from differences between the true and the assumed genetic model, and from mathematical simplifications applied in the prediction methods. Two sets of experimental lines of chickens were used in this study: the Dutch lines undergoing true truncation mass selection, the other lines (French undergoing mass selection with a restriction on the representation of the different families. This study confirmed, on an experimental basis, that modelling is an efficient approach to make useful predictions of the evolution of selected populations although the basic assumptions considered in the models (polygenic additive model, normality of the distribution, base population at the equilibrium, etc. are not met in reality. The two deterministic methods compared yielded results that were close to those observed in real data, especially when the selection scheme followed the rules of strict mass selection: for instance, both predictions overestimated the genetic gain in the French experiment, whereas both predictions were close to the observed values in the Dutch experiment.

  3. Comparison of the identification results of Candida species obtained by BD Phoenix™ and Maldi-TOF (Bruker Microflex LT Biotyper 3.1).

    Science.gov (United States)

    Marucco, Andrea P; Minervini, Patricia; Snitman, Gabriela V; Sorge, Adriana; Guelfand, Liliana I; Moral, Laura López

    2018-02-05

    In patients with invasive fungal infections, the accurate and rapid identification of the genus Candida is of utmost importance since antimycotic sensitivity is closely related to the species. The aim of the present study was to compare the identification results of species of the genus Candida obtained by BD Phoenix™ (Becton Dickinson [BD]) and Maldi-TOF MS (Bruker Microflex LT Biotyper 3.1). A total of 192 isolates from the strain collection belonging to the Mycology Network of the Autonomous City of Buenos Aires, Argentina, were analyzed. The observed concordance was 95%. Only 10 strains (5%) were not correctly identified by the BD Phoenix™ system. The average identification time with the Yeast ID panels was 8h 22min. The BD Phoenix™ system proved to be a simple, reliable and effective method for identifying the main species of the genus Candida. Copyright © 2017 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

  4. KRAS mutation testing in colorectal cancer: comparison of the results obtained using 3 different methods for the analysis of codons G12 and G13.

    Science.gov (United States)

    Bihl, Michel P; Hoeller, Sylvia; Andreozzi, Maria Carla; Foerster, Anja; Rufle, Alexander; Tornillo, Luigi; Terracciano, Luigi

    2012-03-01

    Targeting the epidermal growth factor receptor (EGFR) is a new therapeutic option for patients with metastatic colorectal or lung carcinoma. However, the therapy efficiency highly depends on the KRAS mutation status in the given tumour. Therefore a reliable and secure KRAS mutation testing is crucial. Here we investigated 100 colorectal carcinoma samples with known KRAS mutation status (62 mutated cases and 38 wild type cases) in a comparative manner with three different KRAS mutation testing techniques (Pyrosequencing, Dideoxysequencing and INFINITI) in order to test their reliability and sensitivity. For the large majority of samples (96/100, 96%), the KRAS mutation status obtained by all three methods was the same. Only two cases with clear discrepancies were observed. One case was reported as wild type by the INFINITI method while the two other methods detected a G13C mutation. In the second case the mutation could be detected by the Pyrosequencing and INFINITI method (15% and 15%), while no signal for mutation could be observed with the Dideoxysequencing method. Additional two unclear results were due to a detection of a G12V with the INFINITI method, which was below cut-off when repeated and which was not detectable by the other two methods and very weak signals in a G12V mutated case with the Dideoxy- and Pyroseqencing method compared to the INFINITI method, respectively. In summary all three methods are reliable and robust methods in detecting KRAS mutations. INFINITI, however seems to be slightly more sensitive compared to Dideoxy- and Pyrosequencing.

  5. Influence of the microstructure on the resulting 18R martensitic transformation of polycrystalline Cu−Al−Zn thin films obtained by sputtering and reactive annealing

    International Nuclear Information System (INIS)

    Domenichini, P.; Condó, A.M.; Soldera, F.; Sirena, M.; Haberkorn, N.

    2016-01-01

    We report the influence of the microstructure on the martensitic transformation in polycrystalline Cu−Zn−Al thin films with 18R structure. The films are grown in two steps. First, Cu−Al thin films are obtained by DC sputtering. Second, the Zn is introduced in the Cu−Al thin films by the annealing them together with a bulk Cu−Zn−Al reference. The crystalline structure of the films was analyzed by X-ray diffraction and transmission electron microscopy. The martensitic transformation temperature was measured by electrical transport using conventional four probe geometry. It was observed that temperatures above 973 K are necessary for zincification of the samples to occur. The resulting martensitic transformation and its hysteresis (barrier for the transformation) depend on the grain size, topology and films thickness. - Highlights: • Polycrystalline Cu−Al−Zn thin films with nanometric grain size are sintered. • Influence of thermal annealing process on the microstructure is analyzed. • Martensitic transformation of Cu−Al−Zn thin films is strongly affected by the microstructure.

  6. Influence of the microstructure on the resulting 18R martensitic transformation of polycrystalline Cu−Al−Zn thin films obtained by sputtering and reactive annealing

    Energy Technology Data Exchange (ETDEWEB)

    Domenichini, P. [Instituto Balseiro, Bustillo 9500, S. C. de Bariloche (Argentina); Condó, A.M. [Instituto Balseiro, Bustillo 9500, S. C. de Bariloche (Argentina); Centro Atómico Bariloche, Comisión Nacional de Energía Atómica, Av. Bustillo 9500, 8400 San Carlos de Bariloche (Argentina); Soldera, F. [Department of Materials Science & Engineering, Saarland University, D-66123 Saarbruecken (Germany); Sirena, M. [Instituto Balseiro, Bustillo 9500, S. C. de Bariloche (Argentina); Centro Atómico Bariloche, Comisión Nacional de Energía Atómica, Av. Bustillo 9500, 8400 San Carlos de Bariloche (Argentina); Haberkorn, N., E-mail: nhaberk@cab.cnea.gov.ar [Instituto Balseiro, Bustillo 9500, S. C. de Bariloche (Argentina); Centro Atómico Bariloche, Comisión Nacional de Energía Atómica, Av. Bustillo 9500, 8400 San Carlos de Bariloche (Argentina)

    2016-04-15

    We report the influence of the microstructure on the martensitic transformation in polycrystalline Cu−Zn−Al thin films with 18R structure. The films are grown in two steps. First, Cu−Al thin films are obtained by DC sputtering. Second, the Zn is introduced in the Cu−Al thin films by the annealing them together with a bulk Cu−Zn−Al reference. The crystalline structure of the films was analyzed by X-ray diffraction and transmission electron microscopy. The martensitic transformation temperature was measured by electrical transport using conventional four probe geometry. It was observed that temperatures above 973 K are necessary for zincification of the samples to occur. The resulting martensitic transformation and its hysteresis (barrier for the transformation) depend on the grain size, topology and films thickness. - Highlights: • Polycrystalline Cu−Al−Zn thin films with nanometric grain size are sintered. • Influence of thermal annealing process on the microstructure is analyzed. • Martensitic transformation of Cu−Al−Zn thin films is strongly affected by the microstructure.

  7. The Escompte - Marseille 2001 International Field Experiment: Ground Based and Lidar Results Obtained At St. Chamas By The Epfl Mobile Laboratory

    Science.gov (United States)

    Balin, I.; Jimenez, R.; Simeonov, V.; Ristori, P.; Navarette, M.; van den Bergh, H.; Calpini, B.

    The assessment of the air pollution problems in term of understanding of the non- linear chemical mechanisms, the transport or the meteorological processes, and the choice of the abatement strategies could be based on the air pollution models. Nowa- days, very few of these models were validated due to the lack of 3D measurements. The goal of the ESCOMPTE experiment was to provide such of 3D database in order to constrain the air pollution models. The EPFL-LPA mobile laboratory was part of the ESCOMPTE extensive network and was located on the northern side of the Berre Lake at St.Chamas. In this framework, measurements of the air pollutants (O3, SO2, NOx, polycyclic aromatic hydrocarbons, black carbon and particulate matter of less than 10 microns mean diameter) and meteorological parameters (wind, temperature, pressure and relative humidity) were continuously performed from June 10 to July 13, 2001. They were combined with ground based lidar observations for ozone and aerosol estimation from 100m above ground level up to the free troposphere at ca.7 km agl. This paper will present an overview of the results obtained and will highlight one of the intensive observation period (IOP) during which clean air conditions were initially observed followed by highly polluted air masses during the second half of the IOP.

  8. Scientific Results from the FIRST Instrument Deployment to Cerro Toco, Chile and from the Flight of the INFLAME Instrument

    Science.gov (United States)

    Mlynczak, Martin G.; Cageao, Richard P.; Johnson, David G.

    2011-01-01

    Results from the FIRST and INFLAME infrared Fourier Transform Spectrometers are presented. These are comprehensive measurements of the far-IR spectrum (FIRST) and the net infrared fluxes within the atmosphere (INFLAME).

  9. Relationship between signal intensity of blood flow in the pulmonary artery obtained by magnetic resonance imaging and results of right cardiac catheterization in patients with pulmonary disease

    Energy Technology Data Exchange (ETDEWEB)

    Yuguchi, Yasutoshi; Nagao, Keiichi; Kouno, Norihiro; Tanabe, Nobuhiro; Okita, Shinya; Tojima, Hirokazu; Okada, Osamu; Kuriyama, Takayuki [Chiba Univ. (Japan). School of Medicine; Yamaguchi, Tetsuo

    1992-08-01

    Electrocardiogram-gated spin-echo magnetic resonance (MR) images of the chest were obtained in five normal controls and 35 patients with pulmonary disease (11 chronic obstructive pulmonary disease, 6 pulmonary thromboembolism, 5 primary pulmonary hypertension, 4 interstitial pulmonary disease, 4 pulmonary hypertension with disturbance of portal circulation, and 5 other diseases) who underwent right cardiac catheterization. In transverse images at the level of the right main pulmonary artery (rPA) and sagittal images at the level through the midsternal line and the spinal cord, the signal intensity of blood flow in the rPA was quantitatively evaluated, and the correlations with the MR signal intensity of intravascular flow and the parameters of hemodynamics were studied. In diastole MR images of both normal controls and patients mostly showed a significant signal and visible flow images. In systolic MR images, the mean values of hemodynamic parameters (mean pulmonary arterial pressure (mPAP), pulmonary arteriolar resistance (PAR), and cardiac index (CI)) were abnormal in patients with significant signal intensity of flow compared with those in patients without sufficient MR signal. The signal intensity was not correlated with mPAP; however, it significantly increased as PAR increased, and it increased as CI decreased both in diastole and in systole. Especially in systole, there was good correlation between the signal intensity in transverse MR images and CI and between signal intensity in sagittal MR images and PAR . These results suggest that the signal intensity of blood flow in the rPA on MR images can be used as an index of the severity of right heart failure associated with pulmonary disease. MR imaging is a useful modality to evaluate pulmonary circulation disturbance because of its ability to assess blood flow in the pulmonary artery noninvasively without interference from other structures such as bone and normal lung. (J.P.N.).

  10. Using some results about the Lie evolution of differential operators to obtain the Fokker-Planck equation for non-Hamiltonian dynamical systems of interest

    Science.gov (United States)

    Bianucci, Marco

    2018-05-01

    Finding the generalized Fokker-Planck Equation (FPE) for the reduced probability density function of a subpart of a given complex system is a classical issue of statistical mechanics. Zwanzig projection perturbation approach to this issue leads to the trouble of resumming a series of commutators of differential operators that we show to correspond to solving the Lie evolution of first order differential operators along the unperturbed Liouvillian of the dynamical system of interest. In this paper, we develop in a systematic way the procedure to formally solve this problem. In particular, here we show which the basic assumptions are, concerning the dynamical system of interest, necessary for the Lie evolution to be a group on the space of first order differential operators, and we obtain the coefficients of the so-evolved operators. It is thus demonstrated that if the Liouvillian of the system of interest is not a first order differential operator, in general, the FPE structure breaks down and the master equation contains all the power of the partial derivatives, up to infinity. Therefore, this work shed some light on the trouble of the ubiquitous emergence of both thermodynamics from microscopic systems and regular regression laws at macroscopic scales. However these results are very general and can be applied also in other contexts that are non-Hamiltonian as, for example, geophysical fluid dynamics, where important events, like El Niño, can be considered as large time scale phenomena emerging from the observation of few ocean degrees of freedom of a more complex system, including the interaction with the atmosphere.

  11. Data processing for the Active Particle-induced X-ray Spectrometer and initial scientific results from Chang'e-3 mission

    Science.gov (United States)

    Fu, Xiao-Hui; Li, Chun-Lai; Zhang, Guang-Liang; Zou, Yong-Liao; Liu, Jian-Jun; Ren, Xin; Tan, Xu; Zhang, Xiao-Xia; Zuo, Wei; Wen, Wei-Bin; Peng, Wen-Xi; Cui, Xing-Zhu; Zhang, Cheng-Mo; Wang, Huan-Yu

    2014-12-01

    The Active Particle-induced X-ray Spectrometer (APXS) is an important payload mounted on the Yutu rover, which is part of the Chang'e-3 mission. The scientific objective of APXS is to perform in-situ analysis of the chemical composition of lunar soil and rock samples. The radioactive sources, 55Fe and 109Cd, decay and produce α-particles and X-rays. When X-rays and α-particles interact with atoms in the surface material, they knock electrons out of their orbits, which release energy by emitting X-rays that can be measured by a silicon drift detector (SDD). The elements and their concentrations can be determined by analyzing their peak energies and intensities. APXS has analyzed both the calibration target and lunar soil once during the first lunar day and again during the second lunar day. The total detection time lasted about 266 min and more than 2000 frames of data records have been acquired. APXS has three operating modes: calibration mode, distance sensing mode and detection mode. In detection mode, work distance can be calculated from the X-ray counting rate collected by SDD. Correction for the effect of temperature has been performed to convert the channel number for each spectrum to X-ray energy. Dead time correction is used to eliminate the systematic error in quantifying the activity of an X-ray pulse in a sample and derive the real count rate. We report APXS data and initial results during the first and second lunar days for the Yutu rover. In this study, we analyze the data from the calibration target and lunar soil on the first lunar day. Seven major elements, including Mg, Al, Si, K, Ca, Ti and Fe, have been identified. Comparing the peak areas and ratios of calibration basalt and lunar soil the landing site was found to be depleted in K, and have lower Mg and Al but higher Ca, Ti, and Fe. In the future, we will obtain the elemental concentrations of lunar soil at the Chang'e-3 landing site using APXS data.

  12. An audit of the contribution to post-mortem examination diagnosis of individual analyte results obtained from biochemical analysis of the vitreous.

    Science.gov (United States)

    Mitchell, Rebecca; Charlwood, Cheryl; Thomas, Sunethra Devika; Bellis, Maria; Langlois, Neil E I

    2013-12-01

    Biochemical analysis of the vitreous humor from the eye is an accepted accessory test for post-mortem investigation of cause of death. Modern biochemical analyzers allow testing of a range of analytes from a sample. However, it is not clear which analytes should be requested in order to prevent unnecessary testing (and expense). The means and standard deviation of the values obtained from analysis of the vitreous humor for sodium, potassium, chloride, osmolality, glucose, ketones (β-hydroxybutyrate), creatinine, urea, calcium, lactate, and ammonia were calculated from which the contribution of each analyte was reviewed in the context of post-mortem findings and final cause of death. For sodium 32 cases were regarded as high (more than one standard deviation above the mean), from which 9 contributed to post-mortem diagnosis [drowning (4), heat related death (2), diabetic hyperglycemia (2), and dehydration (1)], but 25 low values (greater than one standard deviation below the mean) made no contribution. For chloride 29 high values contributed to 4 cases--3 drowning and 1 heat-related, but these were all previously identified by a high sodium level. There were 29 high and 35 low potassium values, none of which contributed to determining the final cause of death. Of 22 high values of creatinine, 12 contributed to a diagnosis of renal failure. From 32 high values of urea, 18 contributed to 16 cases of renal failure (2 associated with diabetic hyperglycemia), 1 heat-related death, and one case with dehydration. Osmolarity contributed to 12 cases (5 heat-related, 4 diabetes, 2 renal failure, and 1 dehydration) from 36 high values. There was no contribution from 32 high values and 19 low values of calcium and there was no contribution from 4 high and 2 low values of ammonia. There were 11 high values of glucose, which contributed to the diagnosis of 6 cases of diabetic hyperglycemia and 21 high ketone levels contributed to 8 cases: 4 diabetic ketosis, 3 hypothermia, 3

  13. Scientific results from the deepened Lopra-1 borehole, Faroe Islands: Palaeomagnetic results from the Lopra-1/1A re-entry well, Faroe Islands

    Directory of Open Access Journals (Sweden)

    Abrahamsen, Niels

    2006-07-01

    Full Text Available The palaeomagnetic dating and evolution of the Faroe Islands are discussed in the context of new density and rock magnetic results from the deepened Lopra-1/1A well. The reversal chronology of thec. 6½ km thick basalt succession is also described. The polarity record of the Faroe Islands may now be correlated in detail with the Geomagnetic Polarity Time Scale. The lowermost (hidden part of thelower basalt formation correlates with Chron C26r (Selandian age, the top (exposed part of the lower basalt formation correlates with Chrons C26n, C25r and C25n (Selandian and Thanetian ageand the middle and upper basalt formations correlate with Chron C24n.3r (Ypresian. Inclinations indicate a far-sided position of the palaeomagnetic poles, which is characteristic of results from mostPalaeogene volcanics from the northern North Atlantic region. The density, magnetic susceptibility and magnetic remanence of 20 specimens from one solid core (1½ m in length and 26 sidewall cores from the well between –2219 and –3531 m below sea level (b.s.l. suggest that the volcanic materials can be divided into two characteristic groups: solid unaltered basalts and altered basalts and tuffs. The magnetic properties are typically log-normally distributed and the carriers of remanence are Ti-poor Ti-magnetites with Curie temperatures close to 580°C. The inclination of the 1½ m core at 2380 m b.s.l. is dominantly negative (two plugs at the very top of the core do show normal polarity, but they are likely to be misoriented as all specimens appear to be from one flow. Magnetic logging (magnetic susceptibility and field intensity down to 3515 m b.s.l. was made in Lopra-1/1A together with other geophysical logs but did not yield conclusive inclination data.

  14. A comparison of two methods for prediction of response and rates of inbreeding in selected populations with the results obtained in two selection experiments

    NARCIS (Netherlands)

    Loywyck, V.; Bijma, P.; Pinard-van der Laan, M.H.; Arendonk, van J.A.M.; Verrier, E.

    2005-01-01

    Selection programmes are mainly concerned with increasing genetic gain. However, short-term progress should not be obtained at the expense of the within-population genetic variability. Different prediction models for the evolution within a small population of the genetic mean of a selected trait,

  15. A comparison between the Structural Results obtained by X-ray Single Crystal Data and by Neutron Powder Data for BaVs/sb3/

    International Nuclear Information System (INIS)

    Marezio, M.

    1986-01-01

    The structure of BaVs/sb3/, as refined from X-ray single-crystal data to an R factor of 0.011, is compared to the structure of the same compound obtained from neutron powder data (Rsb(ro) = 6.82, Rsb(psilon) = 4.09). As expected, the X-ray standard deviations of the positional and thermal parameters are smaller than the corresponding neutron standard deviations. However, the dynamical disorder deduced from the anomalously large thermal vibrations of the vanadium atoms obtained from the X-ray data is also evidenced by the neutron refinement. On the other hand, the neutron standard deviations of the lattice parameters are smaller than the X-ray counterparts

  16. Report on scientific results 1982

    International Nuclear Information System (INIS)

    1983-01-01

    Within the section ''data processing and electronics'' application oriented research and development studies are carried out now as before in the fields of general and process-oriented data processing, on the digital and analogous measuring systems as well as on the electronic modules. (orig./WB) [de

  17. Calculation of multigroup constants in WIMS format with programs fedgroup and flange and comparison of the results obtained using different evaluated libraries

    International Nuclear Information System (INIS)

    Trkov, A.; Budnar, M.; Copic, M.; Perdan, A.; Ravnik, M.

    1982-01-01

    Multigroup constants for 1-H-1, 92-U-235, and 92-U-238 have been calculated. Averaged cross-sections and other constants have been prepared in the WIMS 69-group format. Comparison has been made between group constants obtained with several evaluated libraries (KEDAK-3 1975, 1979, ENDF/B-4, ENDF/B-5) and the WIMS-D library. Observed differences are most pronounced in the resonance and fast region. From test runs on fuel cell with the WIMS program it can be deduced that these differences affect the fewgroup constants significantly. (author)

  18. From researchers to primary school: dissemination of scientific research results on the beach. An experience of environmental education at Nefza, Tunisia

    Directory of Open Access Journals (Sweden)

    Lucia Fanini

    2007-03-01

    Full Text Available Within the framework of the MEDCORE project on the ecology andmanagement of Mediterranean coastal areas we decided to includethe local dissemination of scientific results in Tunisia. Theinvolvement of a local public school, and the joint work of localteachers and of local and international researchers, was chosenas a dissemination method because of the role of the school asan educational centre and the natural interest and curiositycharacterising the schoolchildren. As the subject of the experienceof dissemination a beach-dune system was considered suitablebecause of it was near, familiar and easy to reach, and alsobecause of the economic importance of such environments, whichgenerate considerable income as a result of tourists frequentingthem. In environmental education, however, less emphasis is placedon this particular environment. A test performed before and aftera school trip to the beach showed an increase in knowledge amongchildren about beach-dune systems. Correlations between the genderand background of the children with their previous knowledgeand information acquired from the field experience were analysed,and found to be not significant. All the children were equallyreceptive to environmental issues, regardless of their genderor background (urban/rural environment. One of the main resultsobtained through this experience is the effectiveness of sharingknowledge with local people, as stakeholders of study sites.The next step in the process of disseminating scientific knowledgefor the benefit of the local community should be to examine itspossible long-term effects.

  19. Results of regular study on radionuclidic purity of sup(99m)Tc obtained from 99Mo-sup(99m)Tc generators

    International Nuclear Information System (INIS)

    Vlcek, J.; Rohacek, J.; Husak, V.

    1979-01-01

    A total of 39 sup(99m)Tc eluates obtained from 9 99 Mo-sup(99m)Tc generators delivered by The Radiochemical Centre Amersham during one year was studied with regard to their radionuclide purity. Using a Ge(Li) spectrometer the contaminants 60 Co, 103 Ru, 131 I, 134 Cs, 140 La and 188 Re were found in sup(99m)Tc-eluates with average levels ranging from 2.9 x 10 -3 to 2.8 x 10 -1 per cent of sup(99m)Tc activity. The additional total body absorbed dose caused by these contaminants, as calculated from their average content in sup(99m)Tc eluates, was less than 1% of the dose due to sup(99m)Tc pertechnetate. (orig.) 891 MG/orig. 892 CS [de

  20. From global to local statistical shape priors novel methods to obtain accurate reconstruction results with a limited amount of training shapes

    CERN Document Server

    Last, Carsten

    2017-01-01

    This book proposes a new approach to handle the problem of limited training data. Common approaches to cope with this problem are to model the shape variability independently across predefined segments or to allow artificial shape variations that cannot be explained through the training data, both of which have their drawbacks. The approach presented uses a local shape prior in each element of the underlying data domain and couples all local shape priors via smoothness constraints. The book provides a sound mathematical foundation in order to embed this new shape prior formulation into the well-known variational image segmentation framework. The new segmentation approach so obtained allows accurate reconstruction of even complex object classes with only a few training shapes at hand.

  1. Comparison of ATLAS Tilecal MODULE No 8 high-precision metrology measurement results obtained by laser (JINR) and photogrammetric (CERN) methods

    CERN Document Server

    Batusov, V; Gayde, J C; Khubua, J I; Lasseur, C; Lyablin, M V; Miralles-Verge, L; Nessi, Marzio; Rusakovitch, N A; Sissakian, A N; Topilin, N D

    2002-01-01

    The high-precision assembly of large experimental set-ups is of a principal necessity for the successful execution of the forthcoming LHC research programme in the TeV-beams. The creation of an adequate survey and control metrology method is an essential part of the detector construction scenario. This work contains the dimension measurement data for ATLAS hadron calorimeter MODULE No. 8 (6 m, 22 tons) which were obtained by laser and by photogrammetry methods. The comparative data analysis demonstrates the measurements agreement within +or-70 mu m. It means, these two clearly independent methods can be combined and lead to the rise of a new-generation engineering culture: high-precision metrology when precision assembling of large scale massive objects. (3 refs).

  2. Comparison of ATLAS tilecal module No. 8 high-precision metrology measurement results obtained by laser (JINR) and photogrammetric (CERN) methods

    International Nuclear Information System (INIS)

    Batusov, V.; Budagov, Yu.; Gayde, J.C.

    2002-01-01

    The high-precision assembly of large experimental set-ups is of a principal necessity for the successful execution of the forthcoming LHC research programme in the TeV-beams. The creation of an adequate survey and control metrology method is an essential part of the detector construction scenario. This work contains the dimension measurement data for ATLAS hadron calorimeter MODULE No. 8 (6 m, 22 tons) which were obtained by laser and by photogrammetry methods. The comparative data analysis demonstrates the measurements agreement within ± 70 μm. It means, these two clearly independent methods can be combined and lead to the rise of a new-generation engineering culture: high-precision metrology when precision assembling of large scale massive objects

  3. Los Alamos Scientific Laboratory energy-related history, research, managerial reorganization proposals, actions taken, and results. History report, 1945--1979

    International Nuclear Information System (INIS)

    Hammel, E.F.

    1997-03-01

    This report documents the development of major energy-related programs at the Los Alamos Scientific Laboratory between 1945 and 1979. Although the Laboratory's primary mission during that era was the design and development of nuclear weapons and most of the Laboratory's funding came from a single source, a number of factors were at work that led to the development of these other programs. Some of those factors were affected by the Laboratory's internal management structure and organization; others were the result of increasing environmental awareness within the general population and the political consequences of that awareness; still others were related to the increasing demand for energy and the increasing turmoil in the energy-rich Middle East. This report also describes the various activities in Los Alamos, in Washington, and in other areas of the world that contributed to the development of major energy-related programs at Los Alamos. The author has a unique historical perspective because of his involvement as a scientist and manager at the Los Alamos Scientific Laboratory during the time period described within the report. In addition, in numerous footnotes and references, he cites a large body of documents that include the opinions and perspectives of many others who were involved at one time or another in these programs. Finally the report includes a detailed chronology of geopolitical events that led to the development of energy-related programs at Los Alamos

  4. Los Alamos Scientific Laboratory energy-related history, research, managerial reorganization proposals, actions taken, and results. History report, 1945--1979

    Energy Technology Data Exchange (ETDEWEB)

    Hammel, E.F.

    1997-03-01

    This report documents the development of major energy-related programs at the Los Alamos Scientific Laboratory between 1945 and 1979. Although the Laboratory`s primary mission during that era was the design and development of nuclear weapons and most of the Laboratory`s funding came from a single source, a number of factors were at work that led to the development of these other programs. Some of those factors were affected by the Laboratory`s internal management structure and organization; others were the result of increasing environmental awareness within the general population and the political consequences of that awareness; still others were related to the increasing demand for energy and the increasing turmoil in the energy-rich Middle East. This report also describes the various activities in Los Alamos, in Washington, and in other areas of the world that contributed to the development of major energy-related programs at Los Alamos. The author has a unique historical perspective because of his involvement as a scientist and manager at the Los Alamos Scientific Laboratory during the time period described within the report. In addition, in numerous footnotes and references, he cites a large body of documents that include the opinions and perspectives of many others who were involved at one time or another in these programs. Finally the report includes a detailed chronology of geopolitical events that led to the development of energy-related programs at Los Alamos.

  5. results of Breeding Tomato Programme (lycopesicon esculentum mill) for the obtaining of new Tolerant varieties to low inputs hidric through the employment of the Radioinduced mutation

    International Nuclear Information System (INIS)

    Gonzalez, Maria C.; Caballero, Alberto; Mukandama, Jean Pierre; Mohamed Ali, Mansoor; Suarez, Lorenzo; Fuentes, Jorge L

    1999-01-01

    Induced mutation have been mostly used in the improvement of different crops. This papers shows the main results of Breeding Tomato Programme. It was possible to select some promising lines with a good behavior under hidric stress

  6. Final results of the cadmium and spectral ratios obtained inside of the fuel rod positioned in the central position of the IPEN/MB-01 nuclear reactor

    Energy Technology Data Exchange (ETDEWEB)

    Bitelli, Ulysses d' Utra; Mura, Luiz Ernesto C.; Santos, Diogo Feliciano dos, E-mail: ubitelli@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Lambiasi, Beatriz G.N. [Centro Tecnologico da Marinha em Sao Paulo (CTMSP), SP (Brazil)

    2015-07-01

    The spectral ratios are very important to determine some nuclear reactors parameters such as reaction rates, fuel lifetime, etc and some safety operational conditions. This study aims to determine the spectral ratios in 2 (two) spatial positions located inside the core of the Nuclear Reactor IPEN/MB-01. These places are at the central position of the nuclear reactor core in an asymptotic neutron flux region. The experiment consists in inserting different activation foil detectors inside an experimental fuel rod. The experimental rod is assembled at the central position of the reactor core. Activation neutron foil detectors of different elements such as {sup 197}Au, {sup 238}U, {sup 45}Sc, {sup 58}Ni, {sup 24}Mg, {sup 47}Ti and {sup 115m}In were used to cover a large range of neutron spectrum. Saturation activity per target nucleus was obtained by gamma spectrometry using a HPGe system. The experimental cadmium ratios compared with values computed by MCNP-4C code show good agreement. (author)

  7. Results and interpretation of groundwater data obtained from multiport-instrumented coreholes (GW-131 through GS-135), fiscal years 1990 and 1991

    International Nuclear Information System (INIS)

    Dreier, R.B.; Early, T.O.; King, H.L.

    1993-01-01

    With the increased emphasis by Department of Energy personnel on assessing the environmental impact of past waste disposal practices at all of its facilities, there has been an associated increase in characterization activities that focus on delineating site-specific groundwater flow regimes and contaminant migration pathways. At the Oak Ridge Y-12 Plant, the complex geologic and hydrologic relationships require a more detailed understanding of the three-dimensional properties of groundwater flow regimes than can be obtained by conventional monitoring activities. Thus, as part of groundwater characterization activities conducted by the Environmental Surveillance Section staff of the Y-12 Plant Environmental Management Department, five existing deep core holes were instrumented with multiport monitoring systems to provide greatly enhanced resolution of the hydraulic and hydrochemical properties of the groundwater system within Bear Creek Valley. With a multiport system, it is possible to measure hydraulic head and hydraulic conductivity and collect water samples from multiple levels within a single borehole. In this report, multiport data collected during fiscal years (FYs) 1990 and 1991 are summarized

  8. Results obtained in a spectrometry using junction detectors (1962); Resultats en spectrometrie {alpha} a l'aide de ''detecteurs jonction'' (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Beaumevieille, H; Fontenille, J; Lottgequeue, J P; Longequeue, N; Rabour, C [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1962-07-01

    Junction detectors have been used for studying {alpha} spectra obtained by nuclear reactions (p, {alpha}), the protons being produced by an electrostatic accelerator (E{sub p} varying from 100 to 600 keV). Difficulties have been encountered arising from parasitic noise from the accelerator and from the distance (60 metres) between detectors and electronic equipment. Resolution of the counter has been found to be 0.6 per cent with {alpha} from {sup 210}Po and 1.2 pour cent with {alpha} (5.8 MeV) from the reaction {sup 11}B (p, {alpha}{sub 0}). (authors) [French] Des detecteurs a jonction ont ete utilises pour l'etude de spectres {alpha} obtenus par reactions nucleaires (p, {alpha}), les protons etant acceleres par un accelerateur electrostatique (E{sub p} variant de 100 a 600 keV). Des difficultes ont ete recontrees dues aux parasites provenant de l'accelerateur et a la distance des cables (60 metres) entre detecteurs et appareils de mesure. Le pouvoir de resolution de l'ensemble a ete de 0, 6 pour cent avec les {alpha} du {sup 210}Po et de 1,2 pour cent avec les {alpha} (5,8 MeV) de la reaction {sup 11}B (p, {alpha}{sub 0}). (auteurs)

  9. Preliminary interpretations of geologic results obtained from boreholes UE25a-4, -5, -6, and -7, Yucca Mountain, Nevada Test Site

    International Nuclear Information System (INIS)

    Spengler, R.W.; Rosenbaum, J.G.

    1980-01-01

    Since 1978, the USGS (US Geological Survey) has been providing technical assistance in characterizing suitable rock masses at or contiguous to the NTS (Nevada Test Site) for long-term storage of high-level nuclear waste. Current efforts have been focused on investigating Yucca Mountain, a volcanic highland situated along the western boundary of NTS in southern Nevada. Detailed stratigraphic and structural studies have been in progress along a northeastern segment of the highland in a wedge-shaped area bounded by Basin and Range faults, most of which trend north-northeast. A series of four locally steep-walled, nearly parallel, linear washes transect the northeastern half of the area of interest and display trends similar to major faults to the northeast. Prior to the present study, drill hole UE25a-1, located about 1600 feet southeast of the edge of the area of interest, was cored to a depth of 2500 feet. Subsurface information derived from the upper 500 feet of this drill hole is included in this report to compare with recently acquired data. Surface electrical surveys have been conducted by both the University of Utah and the USGS perpendicular to the trend of the washes in an attempt to better understand factors that have influenced the present drainage pattern. Preliminary data of both pole-dipole and dipole-dipole resistivity/IP electrical methods indicate numerous vertical and horizontal discontinuities between adjacent resistive bodies that strongly suggest a broad zone of faulting, fracturing, and (or) brecciation. To verify the existence of structural discontinuities suggested by the linear washes and electrical anomalies, a drilling program was initiated in June 1979, to obtain geologic information within the southernmost of four northwest-trending washes

  10. Preliminary Results Obtained from Flight Test of a Rocket Model Having the Tail Only of the Grumman XF10F Airplane Configuration, TED No. NACA DE 354

    Science.gov (United States)

    Gardner, William N.; Edmondson, James L.

    1950-01-01

    A flight test was made to determine the servoplane effectiveness and stability characteristics of the free-floating horizontal stabilizer to be used on the XF10F airplane. The results of this test indicate that servoplane effectiveness is practically constant through the speed range up to a Mach number of 1.15, and the stabilizer static stability is satisfactory. A loss of damping occurs over a narrow Mach number range near M = 1.0, resulting in dynamic instability of the stabilizer in this narrow range. Above M = 1.0 there is a gradual positive trim change of the stabilizer.

  11. A comparison of texture results obtained using precession electron diffraction and neutron diffraction methods at diminishing length scales in ordered bimetallic nanolamellar composites

    International Nuclear Information System (INIS)

    Carpenter, J.S.; Liu, X.; Darbal, A.; Nuhfer, N.T.; McCabe, R.J.; Vogel, S.C.; LeDonne, J.E.; Rollett, A.D.; Barmak, K.; Beyerlein, I.J.; Mara, N.A.

    2012-01-01

    Precession electron diffraction (PED) is used to acquire orientation information in Cu–Nb nanolamellar composites fabricated by accumulative roll bonding (ARB). The resulting maps quantify the grain size, shape, orientation distributions and interface planes in the vicinity of nanometer-thick deformation twins. The PED-based texture results compare favorably with bulk textures provided by neutron diffraction measurements, indicating uniformity in the ARB Cu–Nb texture. Additionally, {1 1 2} Cu ||{1 1 2} Nb interfaces are present, suggesting that ARB techniques can lead to stable interfaces with a special crystallography.

  12. A comparison of the impact of screen-positive results obtained from ultrasound and biochemical screening for Down syndrome in the first trimester : a pilot study

    NARCIS (Netherlands)

    Weinans, M.J.; Kooij, L.; Muller, M.A.; Bilardo, K.M.; van Lith, J.M.; Tymstra, T.

    2004-01-01

    OBJECTIVE: To compare the experiences of women who received a screen-positive test result for Down syndrome after nuchal translucency screening or after biochemical screening in the first trimester of pregnancy in the Netherlands. METHOD: Semi-quantitative questionnaires were sent to 40 women with a

  13. Comparison of stapes prostheses: a retrospective analysis of individual audiometric results obtained after stapedotomy by implantation of a gold and a teflon piston

    NARCIS (Netherlands)

    de Bruijn, A. J.; Tange, R. A.; Dreschler, W. A.

    1999-01-01

    PURPOSE: Evaluation of hearing results after implantation of a Teflon piston (type Causse; Xomed Surgical Products, Jacksonville, FL) and of a pure gold piston (K-piston; Heinz Kurz GmbH Medizintechnik, Dusslingen, Germany), both with a shaft diameter of 0.4 mm in cases of otosclerosis requiring

  14. A retrospective study of the hearing results obtained after stapedotomy by the implantation of two Teflon pistons with a different diameter

    NARCIS (Netherlands)

    Grolman, W.; Tange, R. A.; de Bruijn, A. J.; Hart, A. A.; Schouwenburg, P. F.

    1997-01-01

    This study reports the evaluation of hearing results after implantation of a Teflon piston of a different diameter in cases of otosclerosis requiring stapedotomy. By random selection, a Teflon piston with a shaft diameter of 0.3 mm was inserted in 34 cases and a piston with a shaft diameter of 0.4

  15. Compatibility study of the different pole figures in one and the same specimen. Comparison between the results obtained by neutron and by X-ray diffraction

    International Nuclear Information System (INIS)

    Pernot, M.; Penelle, R.; Dervin, P.

    1981-01-01

    Development of a calculation to show directly the compatibility of the different pole figures in the same specimen is exposed. A review of the method by serial development is given. Experimental methods are described. The position of the anisotropy axes is determined. Compatibilities resulting from X-ray and from neutron diffraction is analysed [fr

  16. Scientific computing

    CERN Document Server

    Trangenstein, John A

    2017-01-01

    This is the third of three volumes providing a comprehensive presentation of the fundamentals of scientific computing. This volume discusses topics that depend more on calculus than linear algebra, in order to prepare the reader for solving differential equations. This book and its companions show how to determine the quality of computational results, and how to measure the relative efficiency of competing methods. Readers learn how to determine the maximum attainable accuracy of algorithms, and how to select the best method for computing problems. This book also discusses programming in several languages, including C++, Fortran and MATLAB. There are 90 examples, 200 exercises, 36 algorithms, 40 interactive JavaScript programs, 91 references to software programs and 1 case study. Topics are introduced with goals, literature references and links to public software. There are descriptions of the current algorithms in GSLIB and MATLAB. This book could be used for a second course in numerical methods, for either ...

  17. Assessing representativeness of sampling methods for reaching men who have sex with men: a direct comparison of results obtained from convenience and probability samples.

    Science.gov (United States)

    Schwarcz, Sandra; Spindler, Hilary; Scheer, Susan; Valleroy, Linda; Lansky, Amy

    2007-07-01

    Convenience samples are used to determine HIV-related behaviors among men who have sex with men (MSM) without measuring the extent to which the results are representative of the broader MSM population. We compared results from a cross-sectional survey of MSM recruited from gay bars between June and October 2001 to a random digit dial telephone survey conducted between June 2002 and January 2003. The men in the probability sample were older, better educated, and had higher incomes than men in the convenience sample, the convenience sample enrolled more employed men and men of color. Substance use around the time of sex was higher in the convenience sample but other sexual behaviors were similar. HIV testing was common among men in both samples. Periodic validation, through comparison of data collected by different sampling methods, may be useful when relying on survey data for program and policy development.

  18. Technique to Obtain a Predictable Aesthetic Result through Appropriate Placement of the Prosthesis/Soft Tissue Junction in the Edentulous Patient with a Gingival Smile.

    Science.gov (United States)

    Demurashvili, Georgy; Davarpanah, Keyvan; Szmukler-Moncler, Serge; Davarpanah, Mithridade; Raux, Didier; Capelle-Ouadah, Nedjoua; Rajzbaum, Philippe

    2015-10-01

    Treating the edentulous patient with a gingival smile requires securing the prosthesis/soft tissue junction (PSTJ) under the upper lip. To present a simple method that helps achieve a predictable aesthetic result when alveoplasty of the anterior maxilla is needed to place implants apical to the presurgical position of the alveolar ridge. The maximum smile line of the patient is recorded and carved on a thin silicone bite impression as a soft tissue landmark. During the three-dimensional radiographic examination, the patient wears the silicone guide loaded with radiopaque markers. The NobelClinician® software is then used to bring the hard and soft tissue landmarks together in a single reading. Using the software, a line is drawn 5 mm apical to the smile line; it dictates the position of the crestal ridge to be reached following the alveoplasty. Subsequently, the simulated implant position and the simulated residual bone height following alveoplasty can be simultaneously evaluated on each transverse section. An alveoplasty of the anterior maxilla was performed as simulated on the software, and implants were placed accordingly. The PSTJ was always under the upper lip, even during maximum smile events. The aesthetic result was, therefore, fully satisfactory. This simple method permits the placement of the PSTJ under the upper lip with a predictable outcome; it ensures a reliable aesthetic result for the edentulous patient with a gingival smile. © 2013 Wiley Periodicals, Inc.

  19. AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 40: THE SCIENTIFIC OPENING OF THE METHOD OF EXPLOSIVE IMPLOSION FOR THE OBTAINING ABOVE CRITICAL MASS OF NUCLEAR CHARGE AND UKRAINIAN «TRACK» IN THE «MANHATTAN» AMERICAN ATOMIC

    Directory of Open Access Journals (Sweden)

    M. I. Baranov

    2017-10-01

    Full Text Available Purpose. Preparation of short scientifically-historical essay about the prominent American scientist-chemist and physicist George Bogdan Kistiakowsky, having the Ukrainian «roots» and bringing in a considerable scientific and technical contribution to development and creation of the first atomic bombs in the USA. Methodology. Scientific methods of collection, analysis and analytical treatment of the opened scientific and technical information of world level in area of atomic and nuclear physics, physics of hyperpessure, applied electrophysics, modern experimental physics, atomic science and technology. Results. The state-of-the-art review of the state of basic scientific and technical problems, arising up before scientists and engineers at development and creation within the framework of the «Manhattan» American atomic project of the first standards of atomic bombs of the USA is resulted. Two basic methods of receipt in the a-bomb of above critical mass of the divided nuclear material of military load are described: method of «cannon-shot» and method of «explosive implosion». Basic information is resulted about the declassified scheme and construction decisions, applied scientists and specialists in the first atomic bombs of the USA. Technical information is indicated about basic ordinary hard chemical explosive matters (EM, atomic bombs of the USA of implosend type utillized in the first. Originality. Systematization of the scientific and technical materials devoted the basic results of pioneer nuclear researches in the USA and USSR in the period of 1940-th on a capture above all things for soldiery aims by intranuclear energy and to the offensive on a planet Earth of nuclear era known from the opened sources is executed. The important role of the scientific ukrainian origin of G.B. Kistiakowsky in development and creation in the National nuclear center of the USA − Los-Alamos of laboratory of the first implosend atomic bombs of the

  20. A feasibility study of prepubertal and over mature aged local goat in relation to results of In Vitro growth culture to obtain additional M-II oocyte resources

    Science.gov (United States)

    Ciptadi, Gatot; Ihsan, M. Nur; Rahayu, Sri; Widjaja, D. H. K.; Mudawamah, Mudawamah

    2017-11-01

    The aims of this research are to study the potential source of mature (M-II) oocytes of domestic animals using follicles isolated from prepubertal and over mature aged Indonesian local goats, resulting from an in vitro growth (IVG) method. This method of IVG could provide a new source of M-II oocytes for embryo production. In Indonesia, a very limited number of a good quality oocytes are available for research purposes, as there is a limited number of reproductive females slaughtered, which is dominated by prepubertal and old mature aged animals. IVG culture systems could be improved as an alternative method to provide a new source of a good quality oocytes for in vitro maturation of M-II oocytes. From a number of prepubertal and mature aged goats slaughtered in a local abattoir, the small oocytes in the preantral follicles were cultured in vitro to normal oocyte growth. The methods used in this research are experimental. Follicles were isolated, cultured in vitro for 14 days individually using a sticky medium containing 4% (w/v) polyvinylpyrrolidone in TCM 199 10% Fetal Bovine Serum supplemented with Follicle Stimulating Hormone, which was then evaluated for their follicle development and oocyte quality. The research results showed that a minimum follicle size and oocyte diameter is needed (>100 um) for early evaluation of maturation to be achieved, meanwhile oocytes recovered from IVG after being cultured in vitro for maturation resulted in a very low rate of maturation. However, in the future, IVG of the preantral follicles of Indonesian local goat could be considered as an alternative source of oocytes for both research purposes and embryo production in vitro.

  1. Contribution to a summary of the results obtained in the field of geology on the Oklo natural reactors and their environment

    International Nuclear Information System (INIS)

    Weber, F.

    1978-01-01

    The very special characteristics of the ore in the reaction zones may be attributed to the effects of the nuclear reactions themselves: de-structuration of the gangue by neutronic effects and hydrothermal leaching due to the generation of a true thermal syphon by the nuclear reactions. This mechanism contributes to the propagation of reactions from a number of initial reaction sites. The latter were initiated in certain parts of the deposit, enriched as a result of a tectonic episode, by oxidizing currents in the shear troughs. These enriched zones occur as anomalies within a pre-existent deposit, the formation of which still poses many questions of a metallogenic nature. (author)

  2. A nonparametric statistical method for determination of a confidence interval for the mean of a set of results obtained in a laboratory intercomparison

    International Nuclear Information System (INIS)

    Veglia, A.

    1981-08-01

    In cases where sets of data are obviously not normally distributed, the application of a nonparametric method for the estimation of a confidence interval for the mean seems to be more suitable than some other methods because such a method requires few assumptions about the population of data. A two-step statistical method is proposed which can be applied to any set of analytical results: elimination of outliers by a nonparametric method based on Tchebycheff's inequality, and determination of a confidence interval for the mean by a non-parametric method based on binominal distribution. The method is appropriate only for samples of size n>=10

  3. A cross-cultural study on noise problems: Comparison of the results obtained in Japan, West Germany, the U.S.A., China and Turkey

    Science.gov (United States)

    Namba, S.; Kuwano, S.; Schick, A.; Açlar, A.; Florentine, M.; Da Rui, Zheng

    1991-12-01

    Neighborhood noise has become a serious problem in many countries, and it is difficult to regulate by physical means alone. A cross-cultural survey was conducted in five countries, Japan, West Germany, the United States, China and Turkey, among residents of apartment houses in order to examine the cultural differences involved. Interesting differences were found in preferred countermeasures, highly annoying sounds, attitudes against noise, expectations for laws, etc. The use of loudspeakers in public places was accepted in all five countries, provided that they were used for conveying necessary information. The results suggest that it is important to take cultural or social backgrounds into consideration in order to find suitable countermeasures.

  4. Reducing the item number to obtain the same-length self-assessment scales: a systematic approach using result of graphical loglinear rasch models

    DEFF Research Database (Denmark)

    Nielsen, Tine; Kreiner, Svend

    2011-01-01

    The Revised Danish Learning Styles Inventory (R-D-LSI) (Nielsen 2005), which is an adaptation of Sternberg- Wagner Thinking Styles Inventory (Sternberg, 1997), comprises 14 subscales, each measuring a separate learning style. Of these 14 subscales, 9 are eight items long and 5 are seven items long...... Inventory (D-SA-LSI) comprising 14 subscales each with an item length of seven. The systematic approach to item reduction based on results of GLLRM will be presented and exemplified by its application to the R-D-LSI....

  5. On the Evaluation of Computational Results Obtained from Solving System of linear Equations With matlab The Dual affine Scalling interior Point

    International Nuclear Information System (INIS)

    Murfi, Hendri; Basaruddin, T.

    2001-01-01

    The interior point method for linear programming has gained extraordinary interest as an alternative to simplex method since Karmarkar presented a polynomial-time algorithm for linear programming based on interior point method. In implementation of the algorithm of this method, there are two important things that have impact heavily to performance of the algorithm; they are data structure and used method to solve linear equation system in the algorithm. This paper describes about solving linear equation system in variants of the algorithm called dual-affine scaling algorithm. Next, we evaluate experimentally results of some used methods, either direct method or iterative method. The experimental evaluation used Matlab

  6. Contribution to an understanding of the action of gamma radiation on granular starch - interpretation of results obtained using the enzymatic and chromatographic method

    International Nuclear Information System (INIS)

    Robin, J.P.; Tollier, M.Th.; Guilbot, A.

    1978-01-01

    Besides compounds of low molecular mass, the gamma irradiation of granular starch produces radiodextrins with a mass lying between that of the low-molecular-mass compounds and that of the amylose and amylopectin macromolecules from which they derive. The authors present the main results relating to characterization of the radiodextrins of strongly irradiated relating to characterization of the radiodextrins of strongly irradiated normal and waxy maize starches. The method of study - both enzymatic and chromatographic - is the one that has been in use for some ten years for studying the fine structure of α-1.4-1.6 glucanes. An attempt is made to interpret and integrate the results in the light of new data derived from a study of the controlled acid hydrolysis of starch. In particular, the following hypothesis is advanced: the 'hydrolytic' effect of irradiation is, at the qualitative level, independent of the nature of the starch and similar to the effect produced by acid hydrolysis; as with acid hydrolysis, the breaking of the covalent bonds is a function of the internal strucutre of the grain and especially of its amorphous/crystalline organization; the zones of an amorphous character are more easily degraded; on the other hand, the 'crystalline' zones are better protected; in fact, the 'hydrolytic' effect of irradiation is not homogeneous and does not conform to a statistical pattern. (author)

  7. The contribution of an asthma diagnostic consultation service in obtaining an accurate asthma diagnosis for primary care patients: results of a real-life study.

    Science.gov (United States)

    Gillis, R M E; van Litsenburg, W; van Balkom, R H; Muris, J W; Smeenk, F W

    2017-05-19

    Previous studies showed that general practitioners have problems in diagnosing asthma accurately, resulting in both under and overdiagnosis. To support general practitioners in their diagnostic process, an asthma diagnostic consultation service was set up. We evaluated the performance of this asthma diagnostic consultation service by analysing the (dis)concordance between the general practitioners working hypotheses and the asthma diagnostic consultation service diagnoses and possible consequences this had on the patients' pharmacotherapy. In total 659 patients were included in this study. At this service the patients' medical history was taken and a physical examination and a histamine challenge test were carried out. We compared the general practitioners working hypotheses with the asthma diagnostic consultation service diagnoses and the change in medication that was incurred. In 52% (n = 340) an asthma diagnosis was excluded. The diagnosis was confirmed in 42% (n = 275). Furthermore, chronic rhinitis was diagnosed in 40% (n = 261) of the patients whereas this was noted in 25% (n = 163) by their general practitioner. The adjusted diagnosis resulted in a change of medication for more than half of all patients. In 10% (n = 63) medication was started because of a new asthma diagnosis. The 'one-stop-shop' principle was met with 53% of patients and 91% (n = 599) were referred back to their general practitioner, mostly within 6 months. Only 6% (n = 41) remained under control of the asthma diagnostic consultation service because of severe unstable asthma. In conclusion, the asthma diagnostic consultation service helped general practitioners significantly in setting accurate diagnoses for their patients with an asthma hypothesis. This may contribute to diminish the problem of over and underdiagnosis and may result in more appropriate treatment regimens. SERVICE HELPS GENERAL PRACTITIONERS MAKE ACCURATE DIAGNOSES: A consultation service can

  8. An overview of experimental results obtained under the prestressed concrete nuclear pressure vessel development program at the Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Naus, D.J.

    1979-01-01

    Under the Prestressed Concrete Nuclear Pressure Development Program at the Oak Ridge National Laboratory, various aspects of Prestressed Concrete Pressure Vessels (PCPVs) are investigated with respect to reliability, structural performance, constructability, and economy. These investigations are conducted under the High-Temperature Gas-Cooled Reactor (HTGR) Program and the Gas-Cooled Fast Reactor (GCFR) Program. The objectives are to: (1) provide technical support to ongoing PCPV design activities, (2) contribute to the overall technological data base, and (3) provide independent review and evaluations. Specific areas of interest at present include finite-element analysis development, materials and structural behaviour tests, instrumentation evaluations and development, and structural model tests. The following provides an overview of both the HTGR and GCFR PCPV activities and a summary of recent experimental results

  9. Correlation of results obtained by in-vivo optical spectroscopy with measured blood oxygen saturation using a positive linear regression fit

    Science.gov (United States)

    McCormick, Patrick W.; Lewis, Gary D.; Dujovny, Manuel; Ausman, James I.; Stewart, Mick; Widman, Ronald A.

    1992-05-01

    Near infrared light generated by specialized instrumentation was passed through artificially oxygenated human blood during simultaneous sampling by a co-oximeter. Characteristic absorption spectra were analyzed to calculate the ratio of oxygenated to reduced hemoglobin. A positive linear regression fit between diffuse transmission oximetry and measured blood oxygenation over the range 23% to 99% (r2 equals .98, p signal was observed in the patient over time. The procedure was able to be performed clinically without difficulty; rSO2 values recorded continuously demonstrate the usefulness of the technique. Using the same instrumentation, arterial input and cerebral response functions, generated by IV tracer bolus, were deconvoluted to measure mean cerebral transit time. Date collected over time provided a sensitive index of changes in cerebral blood flow as a result of therapeutic maneuvers.

  10. Determination of three-dimensional stress orientations in the Wenchuan earthquake Fault Scientific Drilling (WFSD) hole-1: A preliminary result by anelastic strain recovery measurements of core samples

    Science.gov (United States)

    Cui, J.; Lin, W.; Wang, L.; Tang, Z.; Sun, D.; Gao, L.; Wang, W.

    2010-12-01

    A great and destructive earthquake (Ms 8.0; Mw 7.9), Wunchuan earthquake struck on the Longmen Shan foreland trust zone in Sichuan province, China on 12 May 2008 (Xu et al., 2008; Episodes, Vol.31, pp.291-301). As a rapid response scientific drilling project, Wenchuan earthquake Fault Scientific Drilling (WFSD) started on 6 November 2008 shorter than a half of year from the date of earthquake main shock. The first pilot borehole (hole-1) has been drilled to the target depth (measured depth 1201 m MD, vertical depth 1179 m) at Hongkou, Dujianyan, Sichuan and passed through the main fault of the earthquake around 589 m MD. We are trying to determine three dimensional in-situ stress states in the WFSD boreholes by a core-based method, anelastic strain recovery (ASR) method (Lin et al., 2006; Tectonophysics, Vol4.26, pp.221-238). This method has been applied in several scientific drilling projects (TCDP: Lin et al., 2007; TAO, Vol.18, pp.379-393; NanTtoSEIZE: Byrne et al., 2009; GRL, Vol.36, L23310). These applications confirm the validity of using the ASR technique in determining in situ stresses by using drilled cores. We collected total 15 core samples in a depth range from 340 m MD to 1180 m MD, approximately for ASR measurements. Anelastic normal strains, measured every ten minutes in nine directions, including six independent directions, were used to calculate the anelastic strain tensors. The data of the ASR tests conducted at hole-1 is still undergoing analysis. As a tentative perspective, more than 10 core samples showed coherent strain recovery over one - two weeks. However, 2 or 3 core samples cannot be re-orientated to the global system. It means that we cannot rink the stress orientation determined by the core samples to geological structure. Unfortunately, a few core samples showed irregular strain recovery and were not analyzed further. The preliminary results of ASR tests at hole-1 show the stress orientations and stress regime changes a lot with the

  11. Can Good Infection Control Be Obtained in One-stage Exchange of the Infected TKA to a Rotating Hinge Design? 10-year Results.

    Science.gov (United States)

    Zahar, Akos; Kendoff, Daniel O; Klatte, Till O; Gehrke, Thorsten A

    2016-01-01

    Prosthetic joint infection (PJI) occurs in 1% to 2% of total knee arthroplasties (TKAs). Although two-stage exchange is the preferred management method of patients with chronic PJI in TKA in North America, one-stage exchange is an alternative treatment method, but long-term studies of this approach have not been conducted. We reviewed our minimum 9-year results of 70 patients who underwent one-stage exchange arthroplasty with a rotating hinge design to determine: (1) What was the proportion of patients free of infection? (2) What was the patient rate of survival free of any reoperation? (3) What were the clinical outcomes as measured by Hospital for Special Surgery scores? (4) What proportion of patients developed radiographic evidence of loosening? All one-stage revision TKAs for infection between January 1 and December 31, 2002, with a minimum 9-year followup (mean, 10 years; range, 9-11 years), in which patients had been seen within the last 1 year, were included in this retrospective review. During that period, 11 patients with infected TKAs were treated with other approaches (including two-stage approaches in eight); the general indication for one-stage revision was the diagnosis of PJI with a known causative organism. Exclusion criteria were culture-negative preoperative aspiration, known allergy to local antibiotics or bone cement, or cases in which radical débridement was impossible as a result of the involvement of important anatomical structures. Eighty-one patients with PJI were seen during this period; 70 underwent one-stage exchange using our strict protocol and were reimplanted with a rotating hinge TKA. Eleven patients (15.7%) were lost to followup. Hospital for Special Surgery scores were recorded and all radiographs were evaluated for prosthetic loosening. Failure was defined as revision surgery for infection or any other cause. Our 10-year infection-free survival was 93% (mean, 4.1; 95% confidence interval [CI], 89%-96%; p exchange techniques for

  12. Results of the new processing of images obtained from the surface of Venus in a TV experiment onboard the VENERA-9 lander (1975)

    Science.gov (United States)

    Ksanfomality, L. V.

    2012-09-01

    Data on the results of the analysis of the content of re-processed panorama of the VENERA-9 lander are presented. The panorama was transmitted historically for the first time from the surface of Venus in 1975. The low noise of the VENERA-9 data allowed allocating a large object of an unusual regular structure. Earlier, its fuzzy image was repeatedly cited in the literature being interpreted as a "strange stone". The complex shape and its other features suggest that the object may be a real habitant of the planet. It is not excluded that another similar object observed was damaged during the VENERA-9 landing. From the evidence of its movement and position of some other similar objects it is concluded that because of the limited energy capacity, the physical action of the Venusian fauna may be much slower than that of the Earth fauna. Another question considered is what sources of energy could be used by life in the conditions of the high temperature oxygenless atmosphere of the planet. It is natural to assume that, like on Earth, the Venusian fauna is heterotrophic and should be based on hypothetical flora, using photosynthesis (based on an unknown high temperature biophysical mechanism).

  13. Quantity and quality of black carbon molecular markers as obtained by two chromatographic methods (GC-FID and HPLC-DAD) - How do results compare?

    Science.gov (United States)

    Schneider, M. P. W.; Smittenberg, R. H.; Dittmar, T.; Schmidt, M. W. I.

    2009-04-01

    Chars produced by wildfires are an important source of black carbon (BC) in the environment. After their deposition on the soil surface they can be distributed into rivers, marine waters and sediments. The analysis of benzenepolycarboxylic acids (BPCAs) as a quantitative measure for black carbon (BC) in soil and sediment samples is a well-established method (Glaser et al., 1998; Brodowski et al., 2005). Briefly, the nitric acid oxidation of fused aromatic ring systems in BC forms eight molecular markers (BPCAs), which can be assigned to BC, and which subsequently can be quantified by GC-FID (gas chromatography with flame ionization detector). Recently, this method was modified for the quantification of BC in seawater samples using HPLC-DAD (High performance liquid chromatography with diode array detector) for the determination of individual BPCAs (Dittmar, 2008). A direct comparison of both analytical techniques is lacking but would be important for future data comparison aimed at the calculation of global BC budgets. Here we present a systematic comparison of the two BPCA quantification methods. We prepared chars under well-defined laboratory conditions. In order to cover a broad spectrum of char properties we used two sources of biomass and a wide range of pyrolysis temperatures. Chestnut hardwood chips (Castanea sativa) and rice straw (Oryza sativa) were pyrolysed at temperatures between 200 and 1000°C under a constant N2 stream. The maximum temperatures were held constant for 5 hours (Hammes et al., 2006). The BC contents of the chars have been analysed using the BPCA extraction method followed by either GC-FID or HPLC-DAD quantification. Preliminary results suggest that both methods yield similar total quantities of BPCA, and also the proportions of the individual markers are similar. Ongoing experiments will allow for a more detailed comparison of the two methods. The BPCA composition of chars formed at different temperatures and from different precursor

  14. Colorectal endoscopic submucosal dissection (ESD) in the West - when can satisfactory results be obtained? A single-operator learning curve analysis.

    Science.gov (United States)

    Spychalski, Michał; Skulimowski, Aleksander; Dziki, Adam; Saito, Yutaka

    2017-12-01

    Up to date we lack a detailed description of the colorectal endoscopic submucosal dissection (ESD) learning curve, that would represent the experience of the Western center. The aim of this study was to define the critical points of the learning curve and to draw up lesions qualification guidelines tailored to the endoscopists experience. We have carried out a single center prospective study. Between June 2013 and December 2016, 228 primary colorectal lesions were managed by ESD procedure. In order to create a learning curve model and to carry out the analysis the cases were divided into six periods, each consisting of 38 cases. The overall en bloc resection rate was 79.39%. The lowest en bloc resection rate (52.36%) was observed in the first period. After completing 76 procedures, the resection rate surged to 86% and it was accompanied by the significant increase in the mean procedure speed of ≥9 cm 2 /h. Lesions localization and diameter had a signification impact on the outcomes. After 76 procedures, en bloc resection rate of 90.9 and 90.67% were achieved for the left side of colon and rectum, respectively. In the right side of colon statistically significant lower resection rate of 67.57% was observed. We have proved that in the setting of the Western center, colorectal ESD can yield excellent results. It seems that the key to the success during the learning period is 'tailoring' lesions qualification guidelines to the experience of the endoscopist, as lesions diameter and localization highly influence the outcomes.

  15. Is the resulting phenotype of an embryo with balanced X-autosome translocation, obtained by means of preimplantation genetic diagnosis, linked to the X inactivation pattern?

    Science.gov (United States)

    Ferfouri, Fatma; Bernicot, Izabel; Schneider, Anouck; Haquet, Emmanuelle; Hédon, Bernard; Anahory, Tal

    2016-04-01

    To examine if a balanced female embryo with X-autosome translocation could, during its subsequent development, express an abnormal phenotype. Preimplantation genetic diagnosis (PGD) analysis on two female carriers with maternal inherited X-autosome translocations. Infertility center and genetic laboratory in a public hospital. Two female patients carriers undergoing PGD for a balanced X-autosome translocations: patient 1 with 46,X,t(X;2)(q27;p15) and patient 2 with 46,X,t(X;22)(q28;q12.3). PGD for balanced X-autosome translocations. PGD outcomes, fluorescence in situ hybridization in biopsied embryos and meiotic segregation patterns analysis of embryos providing from X-autosome translocation carriers. Controlled ovarian stimulation facilitated retrieval of a correct number of oocytes. One balanced embryo per patient was transferred and one developed, but the patient miscarried after 6 weeks of amenorrhea. In X-autosome translocation carriers, balanced Y-bearing embryos are most often phenotypically normal and viable. An ambiguous phenotype exists in balanced X-bearing embryos owing to the X inactivation mechanism. In 46,XX embryos issued from an alternate segregation, der(X) may be inactivated and partially spread transcriptional silencing into a translocated autosomal segment. Thus, the structural unbalanced genotype could be turned into a viable functional balanced one. It is relevant that a discontinuous silencing is observed with a partial and unpredictable inactivation of autosomal regions. Consequently, the resulting phenotype remains a mystery and is considered to be at risk of being an abnormal phenotype in the field of PGD. It is necessary to be cautious regarding to PGD management for this type of translocation, particularly in transferred female embryos. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  16. Discordant results obtained with Francisella tularensis during in vitro and in vivo immunological studies are attributable to compromised bacterial structural integrity.

    Directory of Open Access Journals (Sweden)

    Anju Singh

    Full Text Available Francisella tularensis (Ft is a highly infectious intracellular pathogen and the causative agent of tularemia. Because Ft can be dispersed via small droplet-aerosols and has a very low infectious dose it is characterized as a category A Select Agent of biological warfare. Respiratory infection with the attenuated Live Vaccine Strain (LVS and the highly virulent SchuS4 strain of Ft engenders intense peribronchiolar and perivascular inflammation, but fails to elicit select pro-inflammatory mediators (e.g., TNF, IL-1β, IL-6, IL-12, and IFN-γ within the first ~72 h. This in vivo finding is discordant with the principally TH1-oriented response to Ft frequently observed in cell-based studies wherein the aforementioned cytokines are produced. An often overlooked confounding factor in the interpretation of experimental results is the influence of environmental cues on the bacterium's capacity to elicit certain host responses. Herein, we reveal that adaptation of Ft to its mammalian host imparts an inability to elicit select pro-inflammatory mediators throughout the course of infection. Furthermore, in vitro findings that non-host adapted Ft elicits such a response from host cells reflect aberrant recognition of the DNA of structurally-compromised bacteria by AIM2-dependent and -independent host cell cytosolic DNA sensors. Growth of Ft in Muller-Hinton Broth or on Muller-Hinton-based chocolate agar plates or genetic mutation of Ft was found to compromise the structural integrity of the bacterium thus rendering it capable of aberrantly eliciting pro-inflammatory mediators (e.g., TNF, IL-1β, IL-6, IL-12, and IFN-γ. Our studies highlight the profound impact of different growth conditions on host cell response to infection and demonstrate that not all in vitro-derived findings may be relevant to tularemia pathogenesis in the mammalian host. Rational development of a vaccine and immunotherapeutics can only proceed from a foundation of knowledge based upon

  17. Results from Mobile Lab Measurements Obtained in the Barnett Shale with Emphasis on Methane and Gaseous Mercury Emissions (Fort Worth, TX)

    Science.gov (United States)

    Laine, P. L.; Lan, X.; Anderson, D.; Talbot, R. W.

    2013-12-01

    Our work is part of a comprehensive analysis conducted through a collaboration of ground based measurements and airborne measurements with several research groups in order to gain a better understanding of methane and mercury emissions in the Barnett Shale. It's a vast rock formation that sits in the 5,000 square miles surrounding the Fort Worth area. To get the gas to market requires an underground highway of pipelines and compression stations. Texas state records show that since 2000 the number of gas compressors in the Barnett Shale has tripled (from a few hundred to 1,300), and they're ever infringing on populated areas. Recent preliminary data reported by Pétron et al. and Tollefson et al. (from the natural-gas operations in Denver-Julesburg Basin) point to CH4 loss from the process of 4-8%, not including additional losses in the pipeline and distribution system. Additionally, Howarth et al. have conducted a comprehensive analysis of greenhouse gases (methane, in particular) emitted from shale gas as a result of hydraulic fracturing and they estimate up to 8% of all natural gas mined from shale formations leaks to the atmosphere. Not only is this cause for alarm due to the global warming potential of methane, but we would expect similar losses of additional (potentially harmful) gases, i.e., atmospheric Hg, from the extraction systems. These preliminary findings are higher than the current U.S. Environment Protection Agency (EPA) leakage estimate of 2.3 percent. Our strategy employs the use of our mobile laboratory, a four door Chevrolet Silverado pickup truck with a camper shell, outfitted with trace gas instrumentation including a Picarro G2132i and a Tekran 2537 mercury analyzer. The Picarro cavity ring down instrument has high precision and accuracy H2O, CO2, CH4, and 13δC in CH4 and CO2 with very little drift due to precise temperature and pressure controls. The Tekran mercury analyzer allows for accurate total gaseous mercury measurements via

  18. Results obtained during wall breaching research

    CSIR Research Space (South Africa)

    Hattingh, S

    2008-11-01

    Full Text Available To understand the physics of what is happening inside the wall directly after the detonation and the application of this knowledge in the improvement of the charge Measure the shock/stress waves in the masonry material and then in the wall as a whole... to maximise the effect of the charges on the walls and to broaden the knowledge of the physics of shock and stress waves. The thickness and characteristics of walls are not usually known in an operation. The effect of the charges on real buildings is still...

  19. INTEGRATION OF UKRAINIAN INDUSTRY SCIENTIFIC PERIODACLS INTO WORLD SCIENTIFIC INFORMATION SPACE: PROBLEMS AND SOLUTIONS

    Directory of Open Access Journals (Sweden)

    T. O. Kolesnykova

    2013-11-01

    Full Text Available Purpose. Problem of representation lack of scientists’ publications, including transport scientists, in the international scientometric databases is the urgent one for Ukrainian science. To solve the problem one should study the structure and quality of the information flow of scientific periodicals of railway universities in Ukraine and to determine the integration algorithm of scientific publications of Ukrainian scientists into the world scientific information space. Methodology. Applying the methods of scientific analysis, synthesis, analogy, comparison and prediction the author has investigated the problem of scientific knowledge distribution using formal communications. The readiness of Ukrainian railway periodicals to registration procedure in the international scientometric systems was analyzed. The level of representation of articles and authors of Ukrainian railway universities in scientometric database Scopus was studied. Findings. Monitoring of the portals of railway industry universities of Ukraine and the sites of their scientific periodicals and analysis of obtained data prove insufficient readiness of most scientific publications for submission to scientometric database. The ways providing sufficient "visibility" of industry periodicals of Ukrainian universities in the global scientific information space were proposed. Originality. The structure and quality of documentary flow of scientific periodicals in railway transport universities of Ukraine and its reflection in scientometric DB Scopus were first investigated. The basic directions of university activities to integrate the results of transport scientists research into the global scientific digital environment were outlined. It was determined the leading role of university libraries in the integration processes of scientific documentary resources of universities into the global scientific and information communicative space. Practical value. Implementation of the proposed

  20. The current state of Bayesian methods in medical product development: survey results and recommendations from the DIA Bayesian Scientific Working Group.

    Science.gov (United States)

    Natanegara, Fanni; Neuenschwander, Beat; Seaman, John W; Kinnersley, Nelson; Heilmann, Cory R; Ohlssen, David; Rochester, George

    2014-01-01

    Bayesian applications in medical product development have recently gained popularity. Despite many advances in Bayesian methodology and computations, increase in application across the various areas of medical product development has been modest. The DIA Bayesian Scientific Working Group (BSWG), which includes representatives from industry, regulatory agencies, and academia, has adopted the vision to ensure Bayesian methods are well understood, accepted more broadly, and appropriately utilized to improve decision making and enhance patient outcomes. As Bayesian applications in medical product development are wide ranging, several sub-teams were formed to focus on various topics such as patient safety, non-inferiority, prior specification, comparative effectiveness, joint modeling, program-wide decision making, analytical tools, and education. The focus of this paper is on the recent effort of the BSWG Education sub-team to administer a Bayesian survey to statisticians across 17 organizations involved in medical product development. We summarize results of this survey, from which we provide recommendations on how to accelerate progress in Bayesian applications throughout medical product development. The survey results support findings from the literature and provide additional insight on regulatory acceptance of Bayesian methods and information on the need for a Bayesian infrastructure within an organization. The survey findings support the claim that only modest progress in areas of education and implementation has been made recently, despite substantial progress in Bayesian statistical research and software availability. Copyright © 2013 John Wiley & Sons, Ltd.

  1. Results of the scientific and humanitarian projects supported by the German electricity companies (VDEW e.V.) after the Chernobyl accident

    International Nuclear Information System (INIS)

    Pfob, H.; Heinemann, G.

    2000-01-01

    The German Electricity Companies, organized by VDEW e.V., tried to support in manifold ways the areas and people affected by the Chernobyl accident in their management of the situation. Apart from their prompting numerous help projects of the German public; we must mention three efforts especially: 1. the program for partnership in security matters initiated by the German nuclear power plants has been serving a quick and efficient support of the Eastern European plants since 1990- parallel to the efforts on a European level (strategic exchange of views of the experts concerned, consultation and training on the management level, optimization of training programs). 2: the project [Scientists Help Chernobyl Children] of the Joint Committee for Radiation Research (GAST), an union of the scientific societies working on radiation research in Germany under the chairmanship of Prof. Reiners (Essen/Wuerzburg) in cooperation with Prof. Streffer (Essen), Dr. Parezke (Munich), Dr. Heinemann (Hannover) and Dr. Pfob (Karlsruhe), aims to give humanitarian and scientific help for children ill with thyroid cancer in Belarus. Therapy and training, molecular biological examinations, dosimetry, and risk evaluation, as well as consultation and coordination in Minsk are parts of the project. 3: the project of the Radiation Cytogenetics Association (RCA) under the chairmanship of Prof. Bauchinger (GSF Muenchen) has been giving coordinated help with biological dosimetry to institutions and scientist in the states of the former USSR. Through retrospective biological dosimetry, especially the employment of the FISH (fluorescence in situ hybridization)-technology for the assessment of so-called stable translocations, both individual and population doses were analyzed. All three of these projects, even if to a different extent, have been leading to new and unique results up to the present day. Especially the GAST-project has been marked to a high extent by its humanitarian help for the

  2. CIEMAT Interlaboratories Comparison of the Results obtained in the Proficiency Test Run by IAEA; Comparacion Interlaboratorios del CIEMAT de los Resultados Obtenidos en la Prueba de Capacitacion de Analisis de Transuranicos en Cenizas propocionadas por el OIEA

    Energy Technology Data Exchange (ETDEWEB)

    Gasco, C.; Anton, M. P.; Alvarez, A.; Navarro, N.; Meral, J.; Gonzalez, A.; Higueras Lafaja, E. [Ciemat. Madrid (Spain)

    2000-07-01

    This report contains the results obtained by two different laboratories from CIEMAT after participating in the Proficiency Test organised by IAEA (International Atomic Energy Agency) in 1999. This test involves the analysis of fly ashes containing natural radionuclides and different amounts of added transuranics. The extraction techniques, counting methods and results obtained are detailed. This type of test are used for the labs to achieve their accreditation and check the reliability of the procedures routinely employed. (Author) 4 refs.

  3. Ethics in Scientific Publishing

    Science.gov (United States)

    Sage, Leslie J.

    2012-08-01

    We all learn in elementary school not turn in other people's writing as if it were our own (plagiarism), and in high school science labs not to fake our data. But there are many other practices in scientific publishing that are depressingly common and almost as unethical. At about the 20 percent level authors are deliberately hiding recent work -- by themselves as well as by others -- so as to enhance the apparent novelty of their most recent paper. Some people lie about the dates the data were obtained, to cover up conflicts of interest, or inappropriate use of privileged information. Others will publish the same conference proceeding in multiple volumes, or publish the same result in multiple journals with only trivial additions of data or analysis (self-plagiarism). These shady practices should be roundly condemned and stopped. I will discuss these and other unethical actions I have seen over the years, and steps editors are taking to stop them.

  4. Marie Curie: scientific entrepreneur

    International Nuclear Information System (INIS)

    Boudia, S.

    1998-01-01

    Marie Curie is best known for her discovery of radium one hundred years ago this month, but she also worked closely with industry in developing methods to make and monitor radioactive material, as Soraya Boudia explains. One hundred years ago this month, on 28 December 1898, Pierre Curie, Marie Sklodowska-Curie and Gustave Bemont published a paper in Comptes-rendus - the journal of the French Academy of Sciences. In the paper they announced that they had discovered a new element with astonishing properties: radium. But for one of the authors, Marie Curie, the paper was more than just the result of outstanding work: it showed that a woman could succeed in what was then very much a male-dominated scientific world. Having arrived in Paris from Poland in 1891, Marie Curie became the first woman in France to obtain a PhD in physics, the first woman to win a Nobel prize and the first woman to teach at the Sorbonne. She also helped to found a new scientific discipline: the study of radioactivity. She became an icon and a role-model for other women to follow, someone who succeeded - despite many difficulties - in imposing herself on the world of science. Although Curie's life story is a familiar and well documented one, there is one side to her that is less well known: her interaction with industry. As well as training many nuclear physicists and radiochemists in her laboratory, she also became a scientific pioneer in industrial collaboration. In this article the author describes this side of Marie Curie. (UK)

  5. The Radioactive Waste Management Advisory Committee's advice to ministers on the establishment of scientific consensus on the interpretation and significance of the results of science programmes into radioactive waste disposal

    International Nuclear Information System (INIS)

    1999-04-01

    This document presents conclusions and recommendations on establishment of scientific consensus on the interpretation and significance of the results of science programmes into radioactive waste disposal. The topics discussed include: the nature of science and its limitations; societal views of science and the radioactive waste problem; issues upon which consensus will be needed; evidence of past attempts at greater involvement of the public; the linking of scientific and social consensus; communicating the nature of consensus to the public

  6. THE SPANISH SCIENTIFIC JOURNALS: A DESCRIPTIVE APPROACH

    Directory of Open Access Journals (Sweden)

    Melba G. Claudio-González

    2017-02-01

    Full Text Available The main objective of this article is to present a broad description of Spanish scientific journals. The results were obtained from a survey distributed to 1,280 editors of Spanish scientific journals included in Dulcinea database (2012 edition. The response rate was 43,8%. As specific objectives, the study aimed to characterize scientific journals and to analyze the particularities of a set of parameters that make up the economic, strategic and operational dimensions of the journals in the period studied. The results show that the funding model of the Spanish scientific journals depends mainly on institutional support, that many journals lack a stable organizational structure and rely heavily on volunteer work, and that the debate on the limitations and difficulties affecting the development of open access remains open.

  7. Scientific communication

    Directory of Open Access Journals (Sweden)

    Aleksander Kobylarek

    2017-09-01

    Full Text Available The article tackles the problem of models of communication in science. The formal division of communication processes into oral and written does not resolve the problem of attitude. The author defines successful communication as a win-win game, based on the respect and equality of the partners, regardless of their position in the world of science. The core characteristics of the process of scientific communication are indicated , such as openness, fairness, support, and creation. The task of creating the right atmosphere for science communication belongs to moderators, who should not allow privilege and differentiation of position to affect scientific communication processes.

  8. Scientific millenarianism

    International Nuclear Information System (INIS)

    Weinberg, A.M.

    1997-01-01

    Today, for the first time, scientific concerns are seriously being addressed that span future times--hundreds, even thousands, or more years in the future. One is witnessing what the author calls scientific millenarianism. Are such concerns for the distant future exercises in futility, or are they real issues that, to the everlasting gratitude of future generations, this generation has identified, warned about and even suggested how to cope with in the distant future? Can the four potential catastrophes--bolide impact, CO 2 warming, radioactive wastes and thermonuclear war--be avoided by technical fixes, institutional responses, religion, or by doing nothing? These are the questions addressed in this paper

  9. Scientific meetings

    International Nuclear Information System (INIS)

    1973-01-01

    One of the main aims of the IAEA is to foster the exchange of scientific and technical information and one of the main ways of doing this is to convene international scientific meetings. They range from large international conferences bringing together several hundred scientists, smaller symposia attended by an average of 150 to 250 participants and seminars designed to instruct rather than inform, to smaller panels and study groups of 10 to 30 experts brought together to advise on a particular programme or to develop a set of regulations. The topics of these meetings cover every part of the Agency's activities and form a backbone of many of its programmes. (author)

  10. Effectiveness of control techniques in drinking water installations. Survey of recent scientific research results; Effectiviteit beheerstechnieken in drinkwaterinstallaties. RIVM inventariseert recente wetenschappelijke bevindingen

    Energy Technology Data Exchange (ETDEWEB)

    Scheffer, W.

    2012-12-15

    A literature survey has been carried out on current scientific knowledge about the effectiveness of management techniques for Legionella in potable water systems. The examined scientific literature from 2007-201 comprises mainly case studies on the effect of the introduction of a certain management technique on Legionella growth [Dutch] Het RIVM heeft in opdracht van de Inspectie Leefomgeving en Transport (ILT) literatuuronderzoek gedaan naar de huidige wetenschappelijke kennis over de effectiviteit van beheerstechnieken voor legionella in drinkwaterinstallaties. De onderzochte wetenschappelijke literatuur uit 2007-201 I betreft vooral casestudies naar het effect van de introductie van een bepaalde beheerstechniek op de legionellagroei.

  11. Are School Absences Correlated with Influenza Surveillance Data in England? Results from Decipher My Data—A Research Project Conducted through Scientific Engagement with Schools

    Science.gov (United States)

    Aldridge, Robert W.; Hayward, Andrew C.; Field, Nigel; Warren-Gash, Charlotte; Smith, Colette; Pebody, Richard; Fleming, Declan; McCracken, Shane

    2016-01-01

    Background School aged children are a key link in the transmission of influenza. Most cases have little or no interaction with health services and are therefore missed by the majority of existing surveillance systems. As part of a public engagement with science project, this study aimed to establish a web-based system for the collection of routine school absence data and determine if school absence prevalence was correlated with established surveillance measures for circulating influenza. Methods We collected data for two influenza seasons (2011/12 and 2012/13). The primary outcome was daily school absence prevalence (weighted to make it nationally representative) for children aged 11 to 16. School absence prevalence was triangulated graphically and through univariable linear regression to Royal College of General Practitioners (RCGP) influenza like illness (ILI) episode incidence rate, national microbiological surveillance data on the proportion of samples positive for influenza (A+B) and with Rhinovirus, RSV and laboratory confirmed cases of Norovirus. Results 27 schools submitted data over two respiratory seasons. During the first season, levels of influenza measured by school absence prevalence and established surveillance were low. In the 2012/13 season, a peak of school absence prevalence occurred in week 51, and week 1 in RCGP ILI surveillance data. Linear regression showed a strong association between the school absence prevalence and RCGP ILI (All ages, and 5–14 year olds), laboratory confirmed cases of influenza A & B, and weak evidence for a linear association with Rhinovirus and Norovirus. Interpretation This study provides initial evidence for using routine school illness absence prevalence as a novel tool for influenza surveillance. The network of web-based data collection platforms we established through active engagement provides an innovative model of conducting scientific research and could be used for a wide range of infectious disease studies

  12. The Scientific Case against Astrology.

    Science.gov (United States)

    Kelly, Ivan

    1980-01-01

    Discussed is the lack of a scientific foundation and scientific evidence favoring astrology. Included are several research studies conducted to examine astrological tenets which yield generally negative results. (Author/DS)

  13. Genealogical Trees of Scientific Papers.

    Science.gov (United States)

    Waumans, Michaël Charles; Bersini, Hugues

    2016-01-01

    Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a "dying" paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing "offspring". Practically, this might be used to trace the successive published milestones of a research field.

  14. results

    Directory of Open Access Journals (Sweden)

    Salabura Piotr

    2017-01-01

    Full Text Available HADES experiment at GSI is the only high precision experiment probing nuclear matter in the beam energy range of a few AGeV. Pion, proton and ion beams are used to study rare dielectron and strangeness probes to diagnose properties of strongly interacting matter in this energy regime. Selected results from p + A and A + A collisions are presented and discussed.

  15. Statistical data and results obtained on irradiated transistors 2N.2221 Sesco and 2N.2907 SGS; Donnees de fiabilite et resultats statistiques obtenus sur des transistors 2n.2221 Sesco et 2n.2907 SGS irradies

    Energy Technology Data Exchange (ETDEWEB)

    Blin, A; Le Ber, J

    1966-07-01

    This document provides results obtained on many samples of transistors irradiated in the laboratories of the Institut of Nuclear Physic of Lyon. The physical aspects of the irradiation,the statistical aspects of the study and the reliability under irradiation have been studied, but the accent is done on the statistical analysis. (A.L.B.)

  16. To report the obtained results in the operation multicycle study of the L V U-1 using design data with the FCSII (1D) and PRESTO (3D) codes of the FMS system

    International Nuclear Information System (INIS)

    Montes T, J.L.; Cortes C, C.C.

    1991-07-01

    This work is to carry out a multicycle study for the Laguna Verde U-1 reactor with the FCS-II (1 - 20 cycles) and PRESTO (1 - 6 cycles) codes and to compare the obtained results against those reported by General Electric. (Author)

  17. Do the results of respirable dust samples obtained from direct-on-filter X-ray diffraction, direct-on-filter infrared and indirect infrared (KBr pellet) methods correlate?

    CSIR Research Space (South Africa)

    Pretorius, C

    2010-11-01

    Full Text Available The objective of this study was to determine whether a correlation exists between the quartz results obtained from direct-on-filter X-ray Diffraction analysis, direct-on-filter Fourier-Transform Infrared analysis and indirect analysis (Potassium...

  18. Expectations for a scientific collaboratory

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.

    2003-01-01

    In the past decade, a number of scientific collaboratories have emerged, yet adoption of scientific collaboratories remains limited. Meeting expectations is one factor that influences adoption of innovations, including scientific collaboratories. This paper investigates expectations scientists have...... with respect to scientific collaboratories. Interviews were conducted with 17 scientists who work in a variety of settings and have a range of experience conducting and managing scientific research. Results indicate that scientists expect a collaboratory to: support their strategic plans; facilitate management...... of the scientific process; have a positive or neutral impact on scientific outcomes; provide advantages and disadvantages for scientific task execution; and provide personal conveniences when collaborating across distances. These results both confirm existing knowledge and raise new issues for the design...

  19. Scientific information processing procedures

    Directory of Open Access Journals (Sweden)

    García, Maylin

    2013-07-01

    Full Text Available The paper systematizes several theoretical view-points on scientific information processing skill. It decomposes the processing skills into sub-skills. Several methods such analysis, synthesis, induction, deduction, document analysis were used to build up a theoretical framework. Interviews and survey to professional being trained and a case study was carried out to evaluate the results. All professional in the sample improved their performance in scientific information processing.

  20. An annotated checklist of the praying mantises (Mantodea) of Borneo, including the results of the 2008 scientific expedition to Lanjak Entimau Wildlife Sanctuary, Sarawak .

    Science.gov (United States)

    Schwarz, Christian J; Konopik, Oliver

    2014-05-21

    We present the first checklist of praying mantids (Mantodea) of Borneo, with special reference to the specimens collected during the Scientific Expedition to Lanjak Entimau Wildlife Sanctuary 2008. With 118 confirmed species in 56 genera (including subgenera), Borneo is the island with the highest mantodean diversity known to date. In Lanjak Entimau 38 specimens representing 17 genera and 18 species were collected around the station lights and in surrounding secondary and primary forest. A new synonymy in the genus Deroplatys is established. The observed diversity patterns among Bornean mantids are discussed with reference to the biogeographic history of the Sunda Shelf since the Miocene.

  1. Results of the commercialisation of scientific research in the light of experience gained at the Nicolaus Copernicus University Centre for Technology Transfer

    Directory of Open Access Journals (Sweden)

    Matlakiewicz Paweł

    2016-03-01

    Full Text Available The statutory mission of a university, in addition to the creation of scientific knowledge and education, lies in the cooperation with the economic sector through the transfer of knowledge and technology. The effectiveness of this process directly affects the affluence of any given State’s economy. Owing to the new amendments to the Act on Higher Education, many barriers that hinder commercialisation of knowledge in Poland have been brought down. Nicolaus Copernicus University in Toruń sets an excellent example in this respect having established a special purpose entity, which has already managed to set up thirteen spin-off companies in just 18 months.

  2. PSI Scientific report 2009

    International Nuclear Information System (INIS)

    Piwnicki, P.

    2010-04-01

    This annual report issued by the Paul Scherrer Institute (PSI) in Switzerland takes a look at work done at the institute in the year 2009. In particular, the SwissFEL X-ray Laser facility that will allow novel investigations of femtosecond molecular dynamics in chemical, biochemical and condensed-matter systems and permit coherent diffraction imaging of individual nanostructures is commented on. Potential scientific applications of the SwissFEL are noted. Further, the institute's research focus and its findings are commented on. Synchrotron light is looked at and results obtained using neutron scattering and muon spin resonance are reported on. Work done in the micro and nano-technology, biomolecular research and radiopharmacy areas is also reported on Work performed in the biology, general energy and environmental sciences area is also reported on. The institute's comprehensive research facilities are reviewed and the facilities provided for users from the national and international scientific community, in particular regarding condensed matter, materials science and biology research are noted. In addition to the user facilities at the accelerators, other PSI laboratories are also open to external users, e.g. the Hot Laboratory operated by the Nuclear Energy and Safety Department that allows experiments to be performed on highly radioactive samples. The Technology Transfer Office at PSI is also reported on. This department assists representatives from industry in their search for opportunities and sources of innovation at the PSI. Further, an overview is presented of the people who work at the PSI, how the institute is organised and how the money it receives is distributed and used. Finally, a comprehensive list of publications completes the report

  3. Report on the finally obtained results of the study of the basement technology for environmentally friendly type metal base material regenerative utilization; Kankyo chowagata kinzokukei sozai kaisei riyo kiban gijutsu no kenkyu saishu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    For the purpose of contributing to the resource recycling and global environmental preservation, the R and D of metal base scrap regenerative utilization technology were conducted, and the report on the finally obtained results was summed up. As to the technology to remove impurities by the solid phase treatment, the Cu removal rate of more than 96% was made possible by the low temperature fracturing technology, and that of more than 90% by the hue difference discrimination separation system technology. From the results of the FS on the low temperature fracturing technology applied to car scraps, it was found out that the present price condition is not economically efficient in the present price condition, but a possibility of achieving the removal rate of 54% in the initial plan was obtained if applying the hue difference discrimination separation system to the pretreatment. Concerning the Sn removal, the Sn removal rate of more than 70% was obtained by the gaseous phase sulfuration method, and that of more than 50% was obtained in Sn removal/Cu removal/Zn removal by the oxidation reaction method. The targets were achieved. Relating to the treatment of impurities by melting (liquid phase), the Cu removal/Sn removal technology under reduced pressure was effective in vacuum melting furnace of 2-ton scale, but the needs for the development of large capacity plasma torch were recognized in that of 40-ton scale for practical use. (NEDO)

  4. Obtaining of inulin acetate

    OpenAIRE

    Khusenov, Arslonnazar; Rakhmanberdiev, Gappar; Rakhimov, Dilshod; Khalikov, Muzaffar

    2014-01-01

    In the article first obtained inulin ester inulin acetate, by etherification of inulin with acetic anhydride has been exposed. Obtained product has been studied using elementary analysis and IR spectroscopy.

  5. CORRELATION BETWEEN INTELLECTUAL PROPERTY AND SCIENTIFIC ACTIVITY

    Directory of Open Access Journals (Sweden)

    Nataliia Shust

    2017-07-01

    Full Text Available Purpose: The article is dedicated to the analysis of legal nature and peculiarities of optimal correlation between the notions of intellectual property and scientific activity. Nowadays intellectual property as institution goes through the period of establishment in Ukraine. As the Soviet system of civil law was based on recognition and regulation of authors’ rights for the authors of scientific works, discoveries, inventions and innovation proposals as the ones having mainly relative, i.e. legally mandatory, but not absolute character.  Getting started to define the notion of intellectual property and intellectual property right in the system of interaction with scientific activity, it is important to say that such notion as “intellectual property” still needs enhancement. Its imperfection is due to the fact that this kind of property implies being formed by intellectual efforts of the author of scientific work, but legally it is processed with the help of documents that guarantee property right. Methods. General scientific method, philosophical method, specially-legal method of scientific research, system analysis method. Results: It is important to emphasize that not every result of scientific or creative work can become the object of intellectual property right, but the one that corresponds with law. Any scientific work falls within the purview of law if it corresponds with law demands. Scientific and technical results obtain legal protection only in case of appropriate qualification established by specific agency of State administration and issuement of law-enforcement document being limited by the territory of Ukraine. Protection of rights on the territory of other countries is realized only on the basis of correspondent international conventions and treaties. Discussion: Advanced modern countries realized the meaning and importance of usage and proper protection of creative and scientific work results known as

  6. Scientific integrity

    DEFF Research Database (Denmark)

    Merlo, Domenico Franco; Vahakangas, Kirsi; Knudsen, Lisbeth E.

    2008-01-01

    consent was obtained.Integrity is central to environmental health research searching for causal relations. It requires open communication and trust and any violation (i.e., research misconduct, including fabrication or falsification of data, plagiarism, conflicting interests, etc.) may endanger...

  7. Scientific visualization and radiology

    International Nuclear Information System (INIS)

    Lawrance, D.P.; Hoyer, C.E.; Wrestler, F.A.; Kuhn, M.J.; Moore, W.D.; Anderson, D.R.

    1989-01-01

    Scientific visualization is the visual presentation of numerical data. The National Center for Supercomputing Applications (NCSA) has developed methods for visualizing computerbased simulations of digital imaging data. The applicability of these various tools for unique and potentially medical beneficial display of MR images is investigated. Raw data are obtained from MR images of the brain, neck, spine, and brachial plexus obtained on a 1.5-T imager with multiple pulse sequences. A supercomputer and other mainframe resources run a variety of graphic and imaging programs using this data. An interdisciplinary team of imaging scientists, computer graphic programmers, an physicians works together to achieve useful information

  8. Atalante: scientific report 2008

    International Nuclear Information System (INIS)

    2008-01-01

    This report makes a synthesis of the research works carried out at CEA Marcoule in the domain of the back-end of the fuel cycle. The research programs involving the ATALANTE facility concern: the improvement of the spent fuel reprocessing of today's and tomorrow's reactors, the separation of minor actinides prior to their transmutation, and the long-term behaviour of ultimate radioactive wastes immobilized in suitable matrices for a reversible storage or a disposal in deep geologic repositories. The report presents the main scientific results obtained these last years in the domain of: 1 - basic chemistry of actinides and fission products, 2 - processing of spent fuels, 3 - actinides recycling experiments, 4 - long-term behaviour of conditioning matrices for materials and wastes, and 5 - measurements and analytical techniques used in the above mentioned studies. The ATALANTE facility is in the core of the future nuclear stakes which aim at optimizing the recycling of nuclear materials using innovative and proliferation-safe processes, and at minimizing the impact of radioactive wastes on the environment. (J.S.)

  9. Scientific computer simulation review

    International Nuclear Information System (INIS)

    Kaizer, Joshua S.; Heller, A. Kevin; Oberkampf, William L.

    2015-01-01

    Before the results of a scientific computer simulation are used for any purpose, it should be determined if those results can be trusted. Answering that question of trust is the domain of scientific computer simulation review. There is limited literature that focuses on simulation review, and most is specific to the review of a particular type of simulation. This work is intended to provide a foundation for a common understanding of simulation review. This is accomplished through three contributions. First, scientific computer simulation review is formally defined. This definition identifies the scope of simulation review and provides the boundaries of the review process. Second, maturity assessment theory is developed. This development clarifies the concepts of maturity criteria, maturity assessment sets, and maturity assessment frameworks, which are essential for performing simulation review. Finally, simulation review is described as the application of a maturity assessment framework. This is illustrated through evaluating a simulation review performed by the U.S. Nuclear Regulatory Commission. In making these contributions, this work provides a means for a more objective assessment of a simulation’s trustworthiness and takes the next step in establishing scientific computer simulation review as its own field. - Highlights: • We define scientific computer simulation review. • We develop maturity assessment theory. • We formally define a maturity assessment framework. • We describe simulation review as the application of a maturity framework. • We provide an example of a simulation review using a maturity framework

  10. Ten years of sodium cooled steam generator tests on the C.G.V.S. Synthesis of the results obtained on these equipments and operation experiments of an industrial size test facility

    International Nuclear Information System (INIS)

    Fontaine, J.P.; Llory, M.; Quinet, J.L.

    1984-04-01

    From 1970 to 1980, Electricite de France carried out tests on four steam generators of the fast neutron reactor series on an industrial size testing equipment, the C.G.V.S. (large power testing Circuit for Steam Generators heated by Sodium). After a presentation of the testing installation, types of tests carried out and tested apparatus, a balance of lessons drawn from the circuit exploitation, and from the main results obtained on the tested equipments and on the means of calculation COPI and SICLE codes developed or adopted to simulate steam generator operation. 33 figs., 50 refs [fr

  11. Evolution of the scientific paper

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E.

    1992-09-01

    The first papers reporting original research results in technical periodicals and proceedings appeared in the late 17th century. Since that time, the typical scientific paper has evolved from a fairly simple document, accessible to a general audience, to a much more complex one, aimed at a specialized audience. The purpose of this article is to give an overview of what the first scientific papers were like and how they evolved to their present form and style. To facilitate this discussion, the scientific paper`s development has arbitrarily been divided into four stages: the origin and formative years of the scientific paper (1665-1765), emergence of scientific papers written for specialized publications (1765-1865), development of the modem scientific paper (1865-1965), and hyperspecialization and computerization of the modem scientific paper (1965-?).

  12. Evolution of the scientific paper

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E.

    1992-01-01

    The first papers reporting original research results in technical periodicals and proceedings appeared in the late 17th century. Since that time, the typical scientific paper has evolved from a fairly simple document, accessible to a general audience, to a much more complex one, aimed at a specialized audience. The purpose of this article is to give an overview of what the first scientific papers were like and how they evolved to their present form and style. To facilitate this discussion, the scientific paper's development has arbitrarily been divided into four stages: the origin and formative years of the scientific paper (1665-1765), emergence of scientific papers written for specialized publications (1765-1865), development of the modem scientific paper (1865-1965), and hyperspecialization and computerization of the modem scientific paper (1965- ).

  13. Are School Absences Correlated with Influenza Surveillance Data in England? Results from Decipher My Data-A Research Project Conducted through Scientific Engagement with Schools.

    Science.gov (United States)

    Aldridge, Robert W; Hayward, Andrew C; Field, Nigel; Warren-Gash, Charlotte; Smith, Colette; Pebody, Richard; Fleming, Declan; McCracken, Shane

    2016-01-01

    School aged children are a key link in the transmission of influenza. Most cases have little or no interaction with health services and are therefore missed by the majority of existing surveillance systems. As part of a public engagement with science project, this study aimed to establish a web-based system for the collection of routine school absence data and determine if school absence prevalence was correlated with established surveillance measures for circulating influenza. We collected data for two influenza seasons (2011/12 and 2012/13). The primary outcome was daily school absence prevalence (weighted to make it nationally representative) for children aged 11 to 16. School absence prevalence was triangulated graphically and through univariable linear regression to Royal College of General Practitioners (RCGP) influenza like illness (ILI) episode incidence rate, national microbiological surveillance data on the proportion of samples positive for influenza (A+B) and with Rhinovirus, RSV and laboratory confirmed cases of Norovirus. 27 schools submitted data over two respiratory seasons. During the first season, levels of influenza measured by school absence prevalence and established surveillance were low. In the 2012/13 season, a peak of school absence prevalence occurred in week 51, and week 1 in RCGP ILI surveillance data. Linear regression showed a strong association between the school absence prevalence and RCGP ILI (All ages, and 5-14 year olds), laboratory confirmed cases of influenza A & B, and weak evidence for a linear association with Rhinovirus and Norovirus. This study provides initial evidence for using routine school illness absence prevalence as a novel tool for influenza surveillance. The network of web-based data collection platforms we established through active engagement provides an innovative model of conducting scientific research and could be used for a wide range of infectious disease studies in the future.

  14. [Performance analysis of scientific researchers in biomedicine].

    Science.gov (United States)

    Gamba, Gerardo

    2013-01-01

    There is no data about the performance of scientific researchers in biomedicine in our environment that can be use by individual subjects to compare their execution with their pairs. Using the Scopus browser the following data from 115 scientific researchers in biomedicine were obtained: actual institution, number of articles published, place on each article within the author list as first, last or unique author, total number of citations, percentage of citations due to the most cited paper, and h-index. Results were analyzed with descriptive statistics and simple lineal regressions. Most of scientific researches in the sample are from the National Institutes of the Health Ministry or some of the research institutes or faculties at the Universidad Nacional Autónoma de México. Total number of publications was biomedicine in Mexico City, which can be used to compare the productivity of individual subjects with their pairs.

  15. The treatment of irradiated uranium fuel. Results obtained while operating the pilot plant at Fontenay-aux-Roses; Le traitement de l'uranium irradie. Resultats d'exploitation de l'usine-pilote de Fontenay-aux-Roses

    Energy Technology Data Exchange (ETDEWEB)

    Regnaut, P; Faugeras, P; Brut, A; Helou, R; Redon, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    In this paper the results obtained from four years operation of the pilot plant when using bars of increasing activity, are summarised and compared with the results of parallel studies carried out in the laboratory. As a conclusion to the article, the optimum conditions for the different phases of a process based on solvent extraction are given. (author)Fren. [French] Cette conference resume les resultats obtenus durant quatre annees de fonctionnement de l'Usine-Pilote, avec des barreaux d'activite croissante et les compare aux resultats d'etudes conduites parallelement en laboratoire. En conclusion sont donnees les conditions optima pour les differentes phases d'un procede base sur l'extraction par solvant. (auteur)

  16. The profile of high school students’ scientific literacy on fluid dynamics

    Science.gov (United States)

    Parno; Yuliati, L.; Munfaridah, N.

    2018-05-01

    This study aims to describe the profile of scientific literacy of high school students on Fluid Dynamics materials. Scientific literacy is one of the ability to solve daily problems in accordance with the context of materials related to science and technology. The study was conducted on 90 high school students in Sumbawa using survey design. Data were collected using an instrument of scientific literacy for high school students on dynamic fluid materials. Data analysis was conducted descriptively to determine the students’ profile of scientific literacy. The results showed that high school students’ scientific literacy on Fluid Dynamics materials was in the low category. The highest average is obtained on indicators of scientific literacy i.e. the ability to interpret data and scientific evidence. The ability of scientific literacy is related to the mastery of concepts and learning experienced by students, therefore it is necessary to use learning that can trace this ability such as Science, Technology, Engineering, and Mathematics (STEM).

  17. Scientific reasoning profile of junior secondary school students on the concept of static fluid

    Science.gov (United States)

    Mariana, N.; Siahaan, P.; Utari, S.

    2018-05-01

    Scientific reasoning is one of the most important ability. This study aims to determine the profile of scientific reasoning of junior high school students about the concept of static fluid. This research uses a descriptive method with a quantitative approach to get an idea about the scientific reasoning of One Roof Junior Secondary School Student Kotabaru Reteh in Riau. The technique of collecting data is done by test of scientific reasoning. Scientific reasoning capability refers to Furtak’s EBR (Evidence Based Reasoning) scientific reasoning indicator that contains the components of claims, data, evidence, and rules. The result obtained on each element of scientific reasoning is 35% claim, 23% data, 21% evidence and 17% rule. The conclusions of this research that scientific reasoning of Satu Atap Junior Secondary School student Kotabaru Reteh, Riau Province still in the low category.

  18. Fundamental principles for obtaining agricultural produce of standard purity in those parts of the Russian Federation which were radioactively contaminated as a result of the Chernobyl accident, and the effectiveness of the measures being taken

    International Nuclear Information System (INIS)

    Ratnikov, A.N.; Aleksakhin, R.M.; Popova, G.I.; Zhigareva, T.L.; Vasil'ev, A.V.

    1997-01-01

    For the decrease in radionuclide content in agricultural products a complex of countermeasures in plant and animal production should be carried out. The results from the investigations performed indicate that quarantined obtaining of high quality plant products may be achieved by optimization of crop cultivation technology when qualitatively implementing all the agrotechnical operations and introducing the techniques facilitating the decrease of radionuclide transfer to plants. The use of agricultural ameliorants (vermiculite, bentonite), capable of non-exchanging radionuclide absorption in soils, reduces the 137 Cs accumulation in yield from 1,5 to 3 times. One of the most reevaluates economically inexpensive techniques on arable and forage lands under conditions of radioactive contamination is a selection of the most productive crop species and varieties showing the minimum radionuclide accumulation. Specific distinction in 137 Cs accumulation may reach from 2 to 45 times. Variety distinction are less and account for 2 to 5 times. The basis for obtaining plant products fully satisfactory for human consumption is a rational organization of feed stuffs, production, provision for animals of complete balanced diet with minimum radionuclide content, availability of high-productive animals

  19. Determination of diets for the populations of eleven regions of the European community to be used for obtaining radioactive contamination levels. First results concerning the food consumption of individuals classified in nine age-groups

    International Nuclear Information System (INIS)

    Ledermann, S.; Lacourly, G.; Garnier, A.; Cresta, M.; Lombardo, E.

    1968-01-01

    The present document continues the report CEA-R--2979 - EUR--2768-f. The processing of the data given by the family food enquiry carried out in eleven regions of the European Community, has permitted to determine the food consumption of individuals classified in nine age-groups, in order to study the radioactive contamination levels in the food-chain. The used statistical method is described, and the obtained results are presented in form of double-entry tables giving for each region and for each age-group the mean weekly food-consumption and the contribution of each diet in nutrition principles, in minerals, vitamins, trace elements and calories. (authors) [fr

  20. Scientific results from the deepened Lopra-1 borehole, Faroe Islands: Hydrocarbon gases in Palaeogene volcanic rocks from the Lopra-1/1A well, Faroe Islands

    Directory of Open Access Journals (Sweden)

    Laier, Troels

    2006-07-01

    Full Text Available Hydrocarbon gases were monitored in the drilling fluid during deepening of the Lopra-1 well from 2178–3565 m, in which thermogenic, methane-rich gases had been found previously. The mud gas concentration, up to 105 ppm of methane, was generally higher in the hyaloclastite sequence, 2470 m – terminal depth (TD, than in the overlying lavas of the lower basalt formation. The highest concentrations of mud gas in the lower basalt formation were associated with the more porous tuffaceous zones, whereas no simple relationship could be established between measured mud gas concentrations and porosity of the hyaloclastic rocks, which showed less marked porosity variations than the lavas.Chemical (C2+ 104 ppm. No particularly gas-rich zones were indicated, however, by the mud gas, nor was any significant change in lithology noted for this interval. It is possible that the technique of turbo-drilling, that had been attempted over a short interval, 2657–2675 m prior to collection of the high-level methane samples, may have caused enhanced degassingdue to the very fine cuttings produced. Chemical and isotopic composition of headspace gas and mud gas indicated the same type of gas throughout the well, although headspace methane tended to bemore enriched with respect to the 13C isotope.The origin of the Lopra-1 gas is discussed in the light of recent information obtained from source rock studies of central East Greenland and the Faroe–Shetland Basin.

  1. First results on DEPFET Active Pixel Sensors fabricated in a CMOS foundry—a promising approach for new detector development and scientific instrumentation

    Science.gov (United States)

    Aschauer, S.; Majewski, P.; Lutz, G.; Soltau, H.; Holl, P.; Hartmann, R.; Schlosser, D.; Paschen, U.; Weyers, S.; Dreiner, S.; Klusmann, M.; Hauser, J.; Kalok, D.; Bechteler, A.; Heinzinger, K.; Porro, M.; Titze, B.; Strüder, L.

    2017-11-01

    DEPFET Active Pixel Sensors (APS) have been introduced as focal plane detectors for X-ray astronomy already in 1996. Fabricated on high resistivity, fully depleted silicon and back-illuminated they can provide high quantum efficiency and low noise operation even at very high read rates. In 2009 a new type of DEPFET APS, the DSSC (DEPFET Sensor with Signal Compression) was developed, which is dedicated to high-speed X-ray imaging at the European X-ray free electron laser facility (EuXFEL) in Hamburg. In order to resolve the enormous contrasts occurring in Free Electron Laser (FEL) experiments, this new DSSC-DEPFET sensor has the capability of nonlinear amplification, that is, high gain for low intensities in order to obtain single-photon detection capability, and reduced gain for high intensities to achieve high dynamic range for several thousand photons per pixel and frame. We call this property "signal compression". Starting in 2015, we have been fabricating DEPFET sensors in an industrial scale CMOS foundry maintaining the outstanding proven DEPFET properties and adding new capabilities due to the industrial-scale CMOS process. We will highlight these additional features and describe the progress achieved so far. In a first attempt on double-sided polished 725 μm thick 200 mm high resistivity float zone silicon wafers all relevant device related properties have been measured, such as leakage current, depletion voltage, transistor characteristics, noise and energy resolution for X-rays and the nonlinear response. The smaller feature size provided by the new technology allows for an advanced design and significant improvements in device performance. A brief summary of the present status will be given as well as an outlook on next steps and future perspectives.

  2. Centro de Proteccion e Higiene de las Radiaciones (CPHR) Holguin Territorial Office Scientific Technical Co-operation in the field of ionizing radiation metrology: Results and perspectives

    International Nuclear Information System (INIS)

    Morales, J.A.; Bravo, R.

    1993-01-01

    This paper presents an overview of the activities carried out in order to organic a dosimetric calibration territorial service to be performed mainly with Secretaria Ejecutiva Para Asuntos Nucleares (SEAN) personnel and model facilities. This paper emphasizes the results of the calibration which will performed this service in joint association with CPHR specialist and Holguin Territorial Office (june 1993). The perspective of co-operation in this field starting up the CPHR dosimetric calibration secondary laboratory are presented

  3. Blind pre-analysis of the main building complex WWER-1000 Kozloduy. Comparison of analytical and experimental results obtained by explosive testing (task 8a of workplan 96/97)

    International Nuclear Information System (INIS)

    Krutzik, N.J.

    1999-01-01

    In accordance with the 96/97 workplan of the Research Programme on 'Benchmark Studies for Seismic Analysis and Testing of WWER-Type Nuclear Power Plants', blind pre analyses were prepared for the main building complex of the WWER-1000 based on given excitations derived from explosive tests. The investigations were performed by several institutions based on various mathematical models and procedures for consideration of soil-structure interaction effects, but on the same explosive test input data recently obtained. The methods of calculation and software tools used will also be different. The aim of this investigation is to validate different idealization concepts (mathematical models for the idealization of the structures and the soil) as well as investigation procedures (time domain and frequency domain analysis) and finally the software tools by comparing structural response results (time histories and response spectra). This report contains the results of the blind pre analysis performed by Siemens using an equivalent beam model of the main building of the WWER 1000. The calculations were performed by means of a frequency domain calculation

  4. Scientific Crossbreeding

    DEFF Research Database (Denmark)

    Hvidtfeldt, Rolf

    This thesis presents an alternative approach to the analysis of interdisciplinarity. One of the basic reasons for developing an alternative method for evaluation of interdisciplinary activities is that epistemic issues are insufficiently dealt with in the existing literature on the topic. To deve......This thesis presents an alternative approach to the analysis of interdisciplinarity. One of the basic reasons for developing an alternative method for evaluation of interdisciplinary activities is that epistemic issues are insufficiently dealt with in the existing literature on the topic...... of the consequences of representing interdisciplinarity in this way, are the two main contributions offered by this thesis. The treatment of these topics proceed in the following steps: In chapter 1, I introduce the general enterprise and define central concepts. In chapter 2, I provide an in-depth analysis...... as the contemporary status of schizophrenia research, psychiatry, and psychopathology. The result of applying the method for assessment developed in this thesis is quite interesting, I believe. Finally, in chapter 9, I sum up the entire thesis and discuss the consequences of viewing interdisciplinarity...

  5. Science in bullet points: How to compile scientific results to underpin guidelines for CO2 storage for the German transposition of the European CCS Directive

    Science.gov (United States)

    Streibel, Martin

    2015-04-01

    In 2012 the German Parliament passed the transposition of the EC Directive 2009/31/EC the "Carbon Dioxide Storage Law" (KSpG). The law focuses on the demonstration of the CO2 storage technology and mainly regulates the storage part of the Carbon Capture and Storage (CCS) chain. As the law has a conceptual character, appendix 1 provides a description of criteria for the characterisation and assessment of a potential CO2 storage site starting with field data ending with requirements for dynamic modelling of the storage complex. Appendix 2 describes the expected monitoring system during all relevant phases of a life cycle of a CO2 storage site. The criteria given in the appendices are of general nature, which reflects on one hand that the CO2 storage technology is still being developed and on the other hand that site specific aspects needs to be considered. In 2004 the Federal Ministry of Education and Research of Germany launched the programme GEOTECHNOLOGIEN with one key aspect being the development of technologies for a sustainable storage of carbon dioxide in geological formations. Within this research field more than 30 projects in three phases have been funded until the end of 2014. In order to benefit from the gathered knowledge and use the experiences for the policy/law making process the umbrella project AUGE has been launched in October 2012 with a life time of three years. The aim of the project is to review and compile all results of projects funded during the three phases to underpin the appendices of the KSpG. In the first part of the paper the most important findings of the project with regard to the overall risk of a geological CO2 storage and the procedure of compiling the guidance document will be discussed. Milestones of this project were • the compilation of the results of national, European and international projects; • interviews with stakeholders; • a workshops to define state of the art for certain involved technologies and existing gaps

  6. Scientific results from the deepened Lopra-1 borehole, Faroe Islands: Petroleum geochemistry of the deepened Lopra-1/1A re-entry well, Faroe Islands

    Directory of Open Access Journals (Sweden)

    Nytoft, H. Peter

    2006-07-01

    Full Text Available The Lopra-1/1A re-entry well was drilled as a stratigraphic test with no immediate exploration objectives. Hence, petroleum geochemical studies were of limited extent, and restricted to non-destructive analyses. The presence of natural petroleum hydrocarbons could not be confirmed with certainty, but hydrocarbons extracted from the hydrochloric acid solute of a calcite vug present in RSWC #1 (3543 m, may represent indigenous petroleum since hydrocarbon-bearing fluid inclusions have been reported from the same sample. These hydrocarbons show some similarities to petroleum generatedfrom the Upper Jurassic – Lower Cretaceous Kimmeridge Clay type source rocks present in surrounding areas. Except for this sample, the results generally show the presence of a variety of contaminantsof different origins such as ‘naturally greasy fingers’ (squalene and cholesterol, cosmetics such as chap stick or hand lotion (e.g. esters such as butyl-stearate, stearyl-palmitate, vitamin A, plasticisers (phthalates, diesel oil and ‘pipe dope’.

  7. Self-Evaluation of the Scientific Activity of a Higher Educational Institution

    Directory of Open Access Journals (Sweden)

    Rayevnyeva Olena V.

    2017-06-01

    Full Text Available The article is dedicated to the problem of self-evaluation of the scientific activity of a higher educational institution (HEI as a component of its overall ranking evaluation. On the basis of a potentially effective approach to studying this problem, there proposed a system of indicators for evaluating the scientific activity of a HEI, which makes it possible to determine the potential of its scientific activity in terms of staff and resource provision, and the efficiency — in terms of quality of the training of scientific staff (students, graduate students, young scientists, etc., financial results of scientific activity and publication activity. To obtain an integral ranking score of the scientific activity of a HEI, the use of the taxonomic method is justified, the necessity of applying weight coefficients of the significance of primary indicators is determined. The approbation of the approach was carried out on the basis of the data of S. Kuznets KhNEU for the period of 2013-2016, which made it possible to obtain not only point estimates of the integral indicator of the scientific activity of an HEI but also determine the trends in its changes and identify their reasons. The proposed approach to the self-evaluation of the scientific activity of a HEI allows its administration to develop effective management solutions to increase the level of scientific activity of its scientific and pedagogical, and scientific staff, which will provide additional competitive advantages in the national and world educational space.

  8. Regional assignment of seven genes on chromosome 1 of man by use of man-Chinese hamster somatic cell hybrids. II. Results obtained after induction of breaks in chromosome 1 by X-irradiation.

    Science.gov (United States)

    Burgerhout, W G; Smit, S L; Jongsma, A P

    1977-01-01

    The position of genes coding for PGD, PPH1, UGPP, GuK1, PGM1, Pep-C, and FH on human chromosome 1 was investigated by analysis of karyotype and enzyme phenotypes in man-Chinese hamster somatic cell hybrids carrying aberrations involving chromosome 1. Suitable hybrid cell lines were obtained by X-irradiation of hybrid cells carrying an intact chromosome 1 and by fusion of human cells from a clonal population carrying a translocation involving chromosome 1 with Chinese hamster cells. The latter human cell population had been isolated following X-irradiation of primary Lesch-Nyhan fibroblasts. In addition, products of de novo chromosome breakage in the investigated hybrid lines were utilized. By integrating the results of these analyses with earlier findings in our laboratory, the following positions of genes are deduced: PGD and PPH1 in 1p36 leads to 1p34; PGM1 in 1p32; UGPP in 1q21 leads to 1q23; GuK1 in 1q31 leads to 1q42; Pep-C in 1q42; and FH in 1qter leads to 1q42.

  9. The main characteristics of the Saclay proton synchrotron, and the results obtained at the time of its setting in operation; Les caracteristiques principales du synchrotron a protons de Saclay et les resultats obtenus lors de la mise en route

    Energy Technology Data Exchange (ETDEWEB)

    Bruck, H; Debraine, P; Levy-Mandel, R; Lutz, J; Maillet, R; Podliasky, I; Prevot, F; Taieb, J; Winter, S D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    This paper consists on the one hand of a brief outline of the chief advantages of some characteristics peculiar to Saturne, particularly: the separation of the pole pieces from the body of the magnet, the structure of the vacuum chamber, the system of electrostatic deflectors of the injection optics and the HF cavity; and on the other hand of the difficulties encountered since starting up to improve the number of particles supplied by an induction electrode. The results obtained are also given, as for example the photographs taken in the propane chamber. (author)Fren. [French] La presente communication comporte d'une part un bref apercu des principaux avantages de quelques caracteristiques propres a Saturne et en particulier: la separation des pieces polaires de la masse de l'aimant, la structure de la chambre a vide, le systeme de deflecteurs electrostatiques de l'optique d'injection et la cavite HF; d'autre part, les difficultes rencontrees depuis la mise en route pour ameliorer le nombre de particules donne par une electrode d'induction, ainsi que les resultats obtenus comme par exemple les photographies prises dans la chambre a propane. (auteur)

  10. Dates of publication of the Zoology parts of the Report of the Scientific Results of the Voyage of H.M.S. Challenger During the Years 1873-76.

    Science.gov (United States)

    Low, Martyn E Y; Evenhuis, Neal L

    2013-01-01

    The dates of publication and exact titles of the 83 parts of the Zoology of the Report of the Scientific Results of the Voyage of H.M.S. Challenger During the Years 1873-76 are presented. Exact dates of publication for 71 of these parts have been determined using notices of their publication in contemporary publications. The dates of publication of the two Narrative volumes of the voyage of the H.M.S. Challenger (which contain available indications of new names) are also determined.

  11. Resultados del LASIK miópico en el Instituto Cubano de Oftalmología "Ramón Pando Ferrer" Results of myopic LASIK obtained at “Ramón Pando Ferrer” Cuban Institute of Ophthalmology

    Directory of Open Access Journals (Sweden)

    Isabel Cristina Lantigua Maldonado

    2012-06-01

    Full Text Available Objetivos: Evaluar los resultados y la estabilidad del LASIK miópico realizado en el Instituto Cubano de Oftalmología "Ramón Pando Ferrer". Métodos: Se realizó un estudio descriptivo, prospectivo y comparativo. El universo estuvo compuesto por los pacientes operados mediante LASIK (4 011 ojos desde el inicio en nuestro centro (2005 de la cirugía refractiva corneal con láser de excímeros. Se seleccionaron los pacientes con estudios realizados un año después de la cirugía. Las variables estudiadas fueron queratometría, mejor agudeza visual sin corrección, mejor agudeza visual con corrección, equivalente esférico, paquimetría y topografía. Se compararon las variables antes de la cirugía y al año de esta. Los resultados se analizaron mediante la prueba t de Student para datos pareados con significación estadística cuando pObjective: To evaluate the results and the stability of the myopic Lasik carried out in “Ramón Pando Ferrer” Cuban Institute of Ophthalmology. Methods: A prospective, descriptive and comparative study was conducted. The universe of study was made up of the patients operated on by LASIK (4011 eyes from the beginning of the corneal refractive surgery with excimer laser in our center in 2005. The patients were selected from those that had been studied for ametropy correction one year after the surgery. The studied variables were keratometry, better visual acuity without correction, better visual acuity with correction, spherical equivalent, pachymetry and topography, and the obtained results were compared before and at one year of the surgery. The paired T test served to analyze the results with statistical significance of p < 0.05. Results: Significant changes took place in keratometry and spherical equivalent that brought about improved visual acuity without correction for distance vision. The best visual acuity with correction remained the same before and after the surgery. Pachymetry remained within safe

  12. Scientific Tourism in Armenia

    Science.gov (United States)

    Tashchyan, Davit

    2016-12-01

    The Scientific Tourism is relatively new direction in the world, however it already has managed to gain great popularity. As it is, it has arisen in 1980s, but its ideological basis comes from the earliest periods of the human history. In Armenia, it is a completely new phenomenon and still not-understandable for many people. At global level, the Scientific Tourism has several definitions: for example, as explains the member of the scientific tourist centre of Zlovlen Mrs. Pichelerova "The essence of the scientific tourism is based on the provision of the educational, cultural and entertainment needs of a group of people of people who are interested in the same thing", which in our opinion is a very comprehensive and discreet definition. We also have our own views on this type of tourism. Our philosophy is that by keeping the total principles, we put the emphasis on the strengthening of science-individual ties. Our main emphasis is on the scientific-experimental tourism. But this does not mean that we do not take steps to other forms of tourism. Studying the global experience and combining it with our resources, we are trying to get a new interdisciplinary science, which will bring together a number of different professionals as well as individuals, and as a result will have a new lore. It is in this way that an astronomer will become an archaeologist, an archaeologist will become an astrophysicist, etc. Speaking on interdisciplinary sciences, it's worth mentioning that in recent years, the role of interdisciplinary sciences at global level every day is being considered more and more important. In these terms, tourism is an excellent platform for the creation of interdisciplinary sciences and, therefore, the preparation of corresponding scholars. Nevertheless, scientific tourism is very important for the revelation, appreciation and promotion of the country's historical-cultural heritage and scientific potential. Let us not forget either that tourism in all its

  13. Evaluating a scientific collaboratory

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.; Whitton, Mary C.; Maglaughlin, Kelly L.

    2003-01-01

    of the system, and post-interviews to understand the participants' views of doing science under both conditions. We hypothesized that study participants would be less effective, report more difficulty, and be less favorably inclined to adopt the system when collaborating remotely. Contrary to expectations...... of collaborating remotely. While the data analysis produced null results, considered as a whole, the analysis leads us to conclude there is positive potential for the development and adoption of scientific collaboratory systems....

  14. Basic Properties and Problem Fields of Scientific-Innovation Space of the Region

    Directory of Open Access Journals (Sweden)

    Alexey Aleksandrovich Rumyantsev

    2013-06-01

    Full Text Available Increasing scale of the scientific-innovative activity in administrative-territorial units, complicating structure of the regional scientific-innovative complexes and development of inter-regional horizontal and vertical ties expand the space of the scientific and innovation activity research of which primarily involves the development of theoretical and methodological provisions. Basing on the philosophical category «space», the paper describes main properties of the scientific-innovative space of the region and the factors causing them. The author identified problem fields as the direction of possible transformation of scientific-innovative space of the region. The analysis allowed defining some features of the scientific and innovation space and problems of development. The obtained results show the feasibility of study of the scientific-innovative activity in the spatial dimension

  15. Health effects models for nuclear power plant accident consequence analysis. Modification of models resulting from addition of effects of exposure to alpha-emitting radionuclides: Revision 1, Part 2, Scientific bases for health effects models, Addendum 2

    Energy Technology Data Exchange (ETDEWEB)

    Abrahamson, S. [Wisconsin Univ., Madison, WI (United States); Bender, M.A. [Brookhaven National Lab., Upton, NY (United States); Boecker, B.B.; Scott, B.R. [Lovelace Biomedical and Environmental Research Inst., Albuquerque, NM (United States). Inhalation Toxicology Research Inst.; Gilbert, E.S. [Pacific Northwest Lab., Richland, WA (United States)

    1993-05-01

    The Nuclear Regulatory Commission (NRC) has sponsored several studies to identify and quantify, through the use of models, the potential health effects of accidental releases of radionuclides from nuclear power plants. The Reactor Safety Study provided the basis for most of the earlier estimates related to these health effects. Subsequent efforts by NRC-supported groups resulted in improved health effects models that were published in the report entitled {open_quotes}Health Effects Models for Nuclear Power Plant Consequence Analysis{close_quotes}, NUREG/CR-4214, 1985 and revised further in the 1989 report NUREG/CR-4214, Rev. 1, Part 2. The health effects models presented in the 1989 NUREG/CR-4214 report were developed for exposure to low-linear energy transfer (LET) (beta and gamma) radiation based on the best scientific information available at that time. Since the 1989 report was published, two addenda to that report have been prepared to (1) incorporate other scientific information related to low-LET health effects models and (2) extend the models to consider the possible health consequences of the addition of alpha-emitting radionuclides to the exposure source term. The first addendum report, entitled {open_quotes}Health Effects Models for Nuclear Power Plant Accident Consequence Analysis, Modifications of Models Resulting from Recent Reports on Health Effects of Ionizing Radiation, Low LET Radiation, Part 2: Scientific Bases for Health Effects Models,{close_quotes} was published in 1991 as NUREG/CR-4214, Rev. 1, Part 2, Addendum 1. This second addendum addresses the possibility that some fraction of the accident source term from an operating nuclear power plant comprises alpha-emitting radionuclides. Consideration of chronic high-LET exposure from alpha radiation as well as acute and chronic exposure to low-LET beta and gamma radiations is a reasonable extension of the health effects model.

  16. 2005 Annual Scientific Conference. Program and Abstracts

    International Nuclear Information System (INIS)

    Barborica, Andrei; Bulinski, Mircea; Stefan, Sabina

    2005-01-01

    Every year the Physics Department of the University of Bucharest organizes the 'Annual Scientific Conference' to present the most interesting scientific results, obtained within the department. This scientific session is opened also to the interested physics researchers from other institutes and universities in the country. This scientific event represents a recognition and a continuation of the prestigious tradition of physics research performed within University. The scientific research in the Physics Department is performed in groups and research centers, the terminal year undergraduate students and graduate students being involved in a high extent in the research works. There are 5 research centers with the status of Center of excellence in research. The long-term strategy adopted by the faculty was focused on developing the scientific research in modern topics of theoretical, experimental and applied physics, as well as in inter-disciplinary fields as biophysics, medical physics, physics and protection of the environment, physics - computer science. Following this strategy, the Faculty of Physics has diversified the research activity, developing new research laboratories and encouraging the academic community to perform modern and competitive research projects. The Faculty of Physics is a partner in many common research programs with prestigious foreign universities and institutes. The 2005 session covered the following 8 topics: 1. Atmosphere and Earth Science; Environment Protection (21 papers); 2. Atomic and Molecular Physics; Astrophysics (12 papers); 3. Electricity and Biophysics (19 papers); 4. Nuclear and Elementary Particles Physics (17 papers); 5. Optics, Spectroscopy, Plasma and Lasers (19 papers); 6. Polymer Physics (10 papers); 7. Solid State Physics and Materials Science (10 papers); 8. Theoretical Physics and Applied Mathematics Seminar (12 papers)

  17. Scientific instruments, scientific progress and the cyclotron

    International Nuclear Information System (INIS)

    Baird, David; Faust, Thomas

    1990-01-01

    Philosophers speak of science in terms of theory and experiment, yet when they speak of the progress of scientific knowledge they speak in terms of theory alone. In this article it is claimed that scientific knowledge consists of, among other things, scientific instruments and instrumental techniques and not simply of some kind of justified beliefs. It is argued that one aspect of scientific progress can be characterized relatively straightforwardly - the accumulation of new scientific instruments. The development of the cyclotron is taken to illustrate this point. Eight different activities which promoted the successful completion of the cyclotron are recognised. The importance is in the machine rather than the experiments which could be run on it and the focus is on how the cyclotron came into being, not how it was subsequently used. The completed instrument is seen as a useful unit of scientific progress in its own right. (UK)

  18. Scientific report 1999

    International Nuclear Information System (INIS)

    1999-01-01

    The aim of this report is to outline the main developments of the 'Departement des Reacteurs Nucleaires' (DRN) during the year 1999. DRN is one of the CEA Institutions. This report is divided in three main parts: the DRN scientific programs, the scientific and technical publications (with abstracts in English) and economic data on staff, budget and communication. Main results of the Department for the year 1999 are presented giving information on the simulation of low mach number compressible flow, experimental irradiation of multi-materials, progress in the dry route conversion process of UF 6 to UO 2 , the neutronics, the CASCADE installation, the corium, the BWR type reactor cores technology, the reactor safety, the transmutation of americium and fuel cell flow studies, the crack propagation, the hybrid systems and the CEA sites improvement. (A.L.B.)

  19. Scientific report 1998

    International Nuclear Information System (INIS)

    1998-01-01

    The aim of this report is to outline the main developments of the ''Departement des Reacteurs Nucleaires'', (DRN) during the year 1998. DRN is one of the CEA Institution. This report is divided in three main parts: the DRN scientific programs, the scientific and technical publications (with abstracts in english) and economic data on staff, budget and communication. Main results of the Department, for the year 1998, are presented giving information on the reactors technology and safety, the neutronics, the transmutation and the hybrid systems, the dismantling and the sites improvement, the nuclear accidents, the nuclear matter transport, the thermonuclear fusion safety, the fuel cladding materials and radioactive waste control. (A.L.B.)

  20. Comparison of 230Th/234U Dating Results Obtained on Fossil Mollusk Shell from Morocco and Fossil Coral Samples from Egypt. Research of Methodological Criteria to Valid the Measured Age

    International Nuclear Information System (INIS)

    Choukri, A.; Hakam, O.K.; Reyss, J.L.

    2013-01-01

    Radiochemical ages of 126 unrecrystallized coral samples from the Egyptian shoreline and 125 fossil mollusk shell samples from the Atlantic coast of Moroccan High Atlas are discussed.For corals, the obtained ages are in good agreement with the ages reported previously on urecristallized corals except in some sites where some samples are affected by a cementation of younger aragonite.For mollusk shells, the obtained ages are in the most of cases, rejuvenated.This rejuvenation is due eventually to a post-incorporation of secondary uranium that is responsible of the wide dispersion of apparent ages of mollusk shells.

  1. Preventing statistical errors in scientific journals.

    NARCIS (Netherlands)

    Nuijten, M.B.

    2016-01-01

    There is evidence for a high prevalence of statistical reporting errors in psychology and other scientific fields. These errors display a systematic preference for statistically significant results, distorting the scientific literature. There are several possible causes for this systematic error

  2. Programs to obtain vertical heights from mean sea level and for computing volume of sand/mineral along beaches: A case study with Kalbadevi beach profiling data and results

    Digital Repository Service at National Institute of Oceanography (India)

    Ganesan, P.

    Two programs have been developed to process profile data, for obtaining vertical heights with respect to mean sea level (M.S.L.) and for computation of volume of heavy mineral / sand accumulation or erosion along the beaches. The final output...

  3. Intelligent Tools for Building a Scientific Information Platform

    CERN Document Server

    Skonieczny, Lukasz; Rybiński, Henryk; Niezgodka, Marek

    2012-01-01

    This book is a selection of results obtained within one year of research performed under SYNAT - a nation-wide scientific project aiming to create an infrastructure for scientific content storage and sharing for academia, education and open knowledge society in Poland. The selection refers to the research in artificial intelligence, knowledge discovery and data mining, information retrieval and natural language processing, addressing the problems of implementing intelligent tools for building a scientific information platform. The idea of this book is based on the very successful SYNAT Project Conference and the SYNAT Workshop accompanying the 19th International Symposium on Methodologies for Intelligent Systems (ISMIS 2011). The papers included in this book present an overview and insight into such topics as architecture of scientific information platforms, semantic clustering, ontology-based systems, as well as, multimedia data processing.

  4. SALTON SEA SCIENTIFIC DRILLING PROJECT: SCIENTIFIC PROGRAM.

    Science.gov (United States)

    Sass, J.H.; Elders, W.A.

    1986-01-01

    The Salton Sea Scientific Drilling Project, was spudded on 24 October 1985, and reached a total depth of 10,564 ft. (3. 2 km) on 17 March 1986. There followed a period of logging, a flow test, and downhole scientific measurements. The scientific goals were integrated smoothly with the engineering and economic objectives of the program and the ideal of 'science driving the drill' in continental scientific drilling projects was achieved in large measure. The principal scientific goals of the project were to study the physical and chemical processes involved in an active, magmatically driven hydrothermal system. To facilitate these studies, high priority was attached to four areas of sample and data collection, namely: (1) core and cuttings, (2) formation fluids, (3) geophysical logging, and (4) downhole physical measurements, particularly temperatures and pressures.

  5. Conceiving, Writing and Publishing a Scientific Paper

    Directory of Open Access Journals (Sweden)

    Marta Christina Suciu

    2018-02-01

    Full Text Available I consider that the second edition of the book “Conceiving, Writing and Publishing a Scientific Paper. An approach in the context of economic research” is a work of high scientific standing, excellently documented, addressed to knowledgeable readers but also to the new generations of PhD students and researchers interested in attaining the highest academic and scientific performances in the field of Economics. From my point of view, both editions of the book are highly useful for the academic environment. I especially appreciate the authors’ efforts to improve and expand the second edition. This fact is due to the changes occurred in the evolution of scientometric indicators, to the feedback received from readers, but also as the result of the desire to include multiple networks and platforms that take into account professional and institutional profiles, such as to facilitate the researchers’ dissemination of their results obtained in the scientific research activity. The authors benefit on an unanimous recognition and are highly appreciated., fact proven for example by the ten existing reviews of the book’s first edition, published in journals indexed in Web of Science, Scopus and other international databases. I am mostly impressed by the authors’ permanent concern to improve their book’s scientific content. The first edition was awarded the distinction “The Best Book in the Field of Economics” published in 2016 in Romania by the Association of Romanian Economic Faculties, but also by The Association of Cultural-Educational Cooperation from Suceava (ACCES prize in 2016

  6. Ben Franklin's Scientific Amusements

    Science.gov (United States)

    Herschbach, Dudley

    2003-04-01

    As an American icon, Benjamin Franklin is often portrayed as wise and canny in business and politics, earnestly pursuing and extolling diligence, sensible conduct, pragmatism, and good works. Also legendary are some of his inventions, particularly the lightning rod, bifocals, and an efficient wood-burning stove. The iconic image is misleading in major respects. Today, surprisingly few people appreciate that, in the 18th century, Franklin was greatly esteemed throughout Europe as a scientist (termed then a "natural philosopher.") He was hailed as the "Newton of Electricity." Indeed, until Franklin, electricity seemed more mysterious than had gravity in Newton's time, and lightning was considered the wrath of God. By his own account, Franklin's studies of electricity and many other phenomena were prompted not by practical aims, but by his playful curiosity--which often became obsessive. Also not generally appreciated is the importance of Franklin's scientific reputation in enhancing his efforts to obtain French support for the American Revolution.

  7. Apollo's scientific legacy

    International Nuclear Information System (INIS)

    Meadows, J.

    1979-01-01

    The scientific value and importance of the Apollo lunar programme is assessed in the light of data obtained both from the lunar surface itself and also from the command modules which orbited above. It is stated that much of the material they returned still awaits a detailed examination and that the cooperative teams set up to handle the lunar material have established new methods and standards of analysis, which are currently revitalising the old science of meteoritics. The new forms of organised research have also been carried over in the rapidly developing subject of planetary science. It is concluded that whatever the motives for launching the Apollo missions, planetary scientists have been in a much better position to understand the Solar System since then. (UK)

  8. Scientific collaboration with the states of the former Soviet Union; scientific analysis, supplementation, and evaluation of data compiled for management of the consequences of the Chernobyl reactor accident. Final report on the scientific and technical results. Reporting period 1995-1997

    International Nuclear Information System (INIS)

    Hille, R.; Rohloff, F.; Ramzaev, A.; Skryabin, A.; Girij, V.

    1998-04-01

    Activities for this part of the project continued earlier measuring work for input to a database on environmental contamination and transfer of radioactivity to food for another period of three years and were performed in collaboration with the Novosybkov division of the institute for radiation hygiene based in St. Petersburg. The results are summarized and present a particular success with a study of Ukranian partners who made an attempt to solve the relevant differential equations for transfer rate assessment, using the measured data not available to the authors of the Ecosys 87 report in 1990. The authors of this latest study found an interesting correlation between pH-values of the soil and radioactive contamination of the cover of grass. Integration of those data for calculation and simulation using the Ecomodel yielded satisfactory results in the modelling of long-time nuclide transfer used as an averaged value for a number of defined sites. The Ukrainian partners carried out initial investigations into the statistical nature of the nuclide transfer and likewise achieved promising results that can be incorporated in future into the transfer model. (orig./CB)

  9. NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 12: An initial investigation into the production and use of Scientific and Technical Information (STI) at five NASA centers: Results of a telephone survey

    Science.gov (United States)

    Glassman, Nanci A.; Pinelli, Thomas E.

    1992-01-01

    A study was conducted to provide NASA management with an 'initial' look at the production and use of scientific and technical information (STI) at five NASA centers (Ames, Goddard, Langley, Lewis, and Marshall). The 550 respondents who were interviewed by telephone held favorable views regarding the NASA STI system. About 65 percent of the respondents stated that it is either very or somewhat important for them to publish their work through the NASA STI system. About 10 percent of those respondents encountered problems using the NASA STI system services for publication. The most frequently reported problem was 'the process is too time consuming' (8.6 percent). Overall, those respondents using the NASA STI system to publish their work rated the system as excellent (24.6 percent) or good (37.6 percent). About 79 percent of the respondents stated that it is either very or somewhat important for them to use the NASA STI system to access information. The most frequently reported problems were 'the time and effort it takes to locate and obtain information through the system' (14.4 percent). Overall, about 83 percent of the respondents stated that the NASA STI system is important to performing their work. Overall, about 73 percent of the respondents stated that the NASA STI system meets their information needs.

  10. Scientific integrity in Brazil.

    Science.gov (United States)

    Lins, Liliane; Carvalho, Fernando Martins

    2014-09-01

    This article focuses on scientific integrity and the identification of predisposing factors to scientific misconduct in Brazil. Brazilian scientific production has increased in the last ten years, but the quality of the articles has decreased. Pressure on researchers and students for increasing scientific production may contribute to scientific misconduct. Cases of misconduct in science have been recently denounced in the country. Brazil has important institutions for controlling ethical and safety aspects of human research, but there is a lack of specific offices to investigate suspected cases of misconduct and policies to deal with scientific dishonesty.

  11. Windmills: selection method and results obtained by the Renewable Energy Center of UNESP - Guaratingueta Campus, Sao Paulo state, Brazil; Cata-vento: metodo de selecao e resultados obtidos pelo Centro de Energias Renovaveis da UNESP - Campus Guaratingueta

    Energy Technology Data Exchange (ETDEWEB)

    Moura, Luis Fernando Silva; Souza, Teofilo Miguel de [Universidade Estadual Paulista (UNESP), Guaratingueta, SP (Brazil). Centro de Energias Renovaveis], e-mail: teofilo@feg.unesp.br, e-mail: lfernandosm@uol.com.br

    2004-07-01

    Windmills are always a good option to promote irrigate in areas with adequate potential wind. Its correct selection can guarantee the enough water supply with minimum cost. Since April 2004 the Renewable Energy Center of UNESP - Campus Guaratingueta' has tested a commercial windmill with 18 blades rotor and 3,4 diameter meters, that in a area with approximately 3 m/s average wind speed, has been obtained a average daily 1500 water liters. This volume is enough to supply a small country state, however, it could be get with a smaller capacity machine, if this worked properly. (author)

  12. Evaluation of two transport aircraft and several ground test vehicle friction measurements obtained for various runway surface types and conditions. A summary of test results from joint FAA/NASA Runway Friction Program

    Science.gov (United States)

    Yager, Thomas J.; Vogler, William A.; Baldasare, Paul

    1990-01-01

    Tests with specially instrumented NASA Boeing 737 and 727 aircraft together with several different ground friction measuring devices were conducted for a variety of runway surface types and conditions. These tests are part of joint FAA/NASA Aircraft/Ground Vehicle Runway Friction Program aimed at obtaining a better understanding of aircraft ground handling performance under adverse weather conditions and defining relationships between aircraft and ground vehicle tire friction measurements. Aircraft braking performance on dry, wet, snow and ice-covered runway conditions is discussed as well as ground vehicle friction data obtained under similar runway conditions. For a given contaminated runway surface condition, the correlation between ground vehicles and aircraft friction data is identified. The influence of major test parameters on friction measurements such as speed, test tire characteristics, type and amount of surface contaminant, and ambient temperature are discussed. The effect of surface type on wet friction levels is also evaluated from comparative data collected on grooved and ungrooved concrete and asphalt surfaces.

  13. The Scientific Enterprise

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 13; Issue 9. The Scientific Enterprise - Assumptions, Problems, and Goals in the Modern Scientific Framework. V V Raman. Reflections Volume 13 Issue 9 September 2008 pp 885-894 ...

  14. Preliminary Results Obtained from Flight Test of a 1/7-Scale Rocket-Powered Model of the Grumman XF10F Airplane Configuration in the Swept-Wing Condition, TED No. NACA DE 354

    Science.gov (United States)

    Gardner, William N.

    1951-01-01

    A flight investigation of a 1/7-scale rocket-powered model of the XF10F Grumman XFl0F airplane in the swept-wing configuration has been made. The purpose of this test was to determine the static longitudinal stability, damping in pitch, and longitudinal control effectiveness of the airplane with the center of gravity at 20 percent of the wing mean aerodynamic chord. Only a small amount of data was obtained from the test because, immediately after booster separation at a Mach number of 0.88, the configuration was directionally unstable and diverged in sideslip. Simultaneous with the sideslip divergence, the model became longitudinally unstable at 3 degree angle of attack and -6 degree sideslip and diverged in pitch to a high angle of attack. During the pitch-up the free-floating horizontal tail became unstable at 5 degree angle of attack and the tail drifted against its positive deflection limit.

  15. Quantitative scintiscanning in the follow-up observation of carcinomas of the breast. A correlation of results thus obtained with X-ray and laboratory findings to evaluate the effects of local irradiation or cytostatics

    International Nuclear Information System (INIS)

    Bauer, U.

    1985-01-01

    Scintiscan studies using 99m-Tc methylene diphosphonate and the region-of-interest technique were carried out in order to obtain additional quantitative data on bone metastases that had already been confirmed by X-rays. Different degrees of density allowed to calculate the quotient of the ratio between bones and soft tissues. Changes in the behaviour of this quotient were found to provide information relevant to the value of chemotherapy or irradiation. Reduced quotients were interpreted as being a sign of a favourable response to treatment. One major drawback of this quotient is that it cannot be used without restriction for all kinds of therapy of laboratory examinations to assess the progress or remission of bone metastases. Nevertheless, it seems a meaningful parameter in the surveillance of patients receiving cytostatics or radiotherapy. (TRV) [de

  16. Results of environmental radiation monitoring and meteorology measurements (material prepared for obtaining the licence for RA reactor experimental operation); Rezultati merenja zracenja u okolini i rezultati meteoroloskih merenja (materijal pripremljen radi dobijanja dozvole za pustanje Reaktora RA u probni rad)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-10-15

    According to the demands for obtaining the licence for restarting the Ra reactor and the experimental operation this document includes the radiation monitoring measured data in the working space and environment of the RA reactor, i.e. Boris Kidric Institute. The meteorology measured data are included as well. All the measurements are performed according to the radiation protection program applied actually from the first reactor start-up at the end of 1959. [Serbo-Croat] Saglasno zahtevu za dobijanje dozvole za ponovno pustanje u probni rad reaktora RA, ovaj dokument sadrzi rezultate merenja zracenja u okolini (radnoj i zivotnoj) reaktora RA odnosno instituta 'Boris Kidric' kao i podatke o meteoroloskim merenjima. Sve merenja rade se prema programu mera zastite od zracenja koje se sprovode prakticno od prvog pustanja reaktora u rad krajem 1959. godine.

  17. Extensional scientific realism vs. intensional scientific realism.

    Science.gov (United States)

    Park, Seungbae

    2016-10-01

    Extensional scientific realism is the view that each believable scientific theory is supported by the unique first-order evidence for it and that if we want to believe that it is true, we should rely on its unique first-order evidence. In contrast, intensional scientific realism is the view that all believable scientific theories have a common feature and that we should rely on it to determine whether a theory is believable or not. Fitzpatrick argues that extensional realism is immune, while intensional realism is not, to the pessimistic induction. I reply that if extensional realism overcomes the pessimistic induction at all, that is because it implicitly relies on the theoretical resource of intensional realism. I also argue that extensional realism, by nature, cannot embed a criterion for distinguishing between believable and unbelievable theories. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Application of Molecular Typing Results in Source Attribution Models: The Case of Multiple Locus Variable Number Tandem Repeat Analysis (MLVA) of Salmonella Isolates Obtained from Integrated Surveillance in Denmark

    DEFF Research Database (Denmark)

    de Knegt, Leonardo; Pires, Sara Monteiro; Löfström, Charlotta

    2016-01-01

    , and antibiotic resistance profiles for the Salmonella source attribution, and assess the utility of the results for the food safety decisionmakers. Full and simplified MLVA schemes from surveillance data were tested, and model fit and consistency of results were assessed using statistical measures. We conclude...

  19. Different percentages of false-positive results obtained using five methods for the calculation of reference change values based on simulated normal and ln-normal distributions of data

    DEFF Research Database (Denmark)

    Lund, Flemming; Petersen, Per Hyltoft; Fraser, Callum G

    2016-01-01

    a homeostatic set point that follows a normal (Gaussian) distribution. This set point (or baseline in steady-state) should be estimated from a set of previous samples, but, in practice, decisions based on reference change value are often based on only two consecutive results. The original reference change value......-positive results. The aim of this study was to investigate false-positive results using five different published methods for calculation of reference change value. METHODS: The five reference change value methods were examined using normally and ln-normally distributed simulated data. RESULTS: One method performed...... best in approaching the theoretical false-positive percentages on normally distributed data and another method performed best on ln-normally distributed data. The commonly used reference change value method based on two results (without use of estimated set point) performed worst both on normally...

  20. WWW: The Scientific Method

    Science.gov (United States)

    Blystone, Robert V.; Blodgett, Kevin

    2006-01-01

    The scientific method is the principal methodology by which biological knowledge is gained and disseminated. As fundamental as the scientific method may be, its historical development is poorly understood, its definition is variable, and its deployment is uneven. Scientific progress may occur without the strictures imposed by the formal…

  1. Scientific papers for health informatics.

    Science.gov (United States)

    Pereira, Samáris Ramiro; Duarte, Jacy Marcondes; Bandiera-Paiva, Paulo

    2013-01-01

    From the hypothesis that the development of scientific papers, mainly in interdisciplinary areas such as Health Informatics, may bring difficulties to the author, as had its communicative efficacy decreased or compromising their approval for publication; we aim to make considerations on the main items to good players making this kind of text. The scientific writing has peculiarities that must be taken into consideration when it writes: general characteristics, such as simplicity and objectivity, and characteristics of each area of knowledge, such as terminology, formatting and standardization. The research methodology adopted is bibliographical. The information was based on literature review and the authors' experience, teachers and assessors of scientific methodology in peer review publications in the area. As a result, we designed a checklist of items to be checked before submission of a paper to a scientific publication vehicle in order to contribute to the promotion of research, facilitating the publication and increase its capacity in this important area of knowledge.

  2. 2004 Annual Scientific Conference. Program and Abstracts

    International Nuclear Information System (INIS)

    Barborica, Andrei; Bulinski, Mircea; Stefan, Sabina

    2005-01-01

    As consequence of a long experience in educational as well as research field the Physics Department of the Bucharest University is offering high-standard undergraduate and graduate programs of higher education in physical sciences. The long-term strategy adopted by the faculty was focused on developing scientific research in modern topics of theoretical, experimental and applied physics as well as in inter-disciplinary fields as biophysics, medical physics, physics and protection of environment, physics-computer science. Following this strategy the Faculty of Physics has diversified the research activity, developing new research laboratories and encouraging the academic community to approach modern and competitive research projects. Every year the Physics Department of the University of Bucharest organizes the 'Annual Scientific Conference' to present the most interesting scientific results, obtained within the department. This 2004 scientific session is opened also to the interested physics researchers from other institutes and universities in the country. This scientific event represents a recognition and a continuation of the prestigious tradition of physics research performed within University. The scientific research in the Physics Department is performed in groups and research centers, the terminal year undergraduate students and graduate students being involved in a high extent in the research works. There are 5 research centers with the status of Center of excellence in research. The long-term strategy adopted by the faculty was focused on developing the scientific research in modern topics of theoretical, experimental and applied physics, as well as in inter-disciplinary fields as biophysics, medical physics, physics and protection of the environment, physics - computer science. Following this strategy, the Faculty of Physics has diversified the research activity, developing new research laboratories and encouraging the academic community to perform modern

  3. 2003 Annual Scientific Conference. Program and Abstracts

    International Nuclear Information System (INIS)

    Barborica, Andrei; Bulinski, Mircea

    2003-01-01

    As consequence of a long experience in educational as well as research field the Physics Department of the Bucharest University is offering high-standard undergraduate and graduate programs of higher education in physical sciences. The long-term strategy adopted by the faculty was focused on developing scientific research in modern topics of theoretical, experimental and applied physics as well as in inter-disciplinary fields as biophysics, medical physics, physics and protection of environment, physics-computer science. Following this strategy the Faculty of Physics has diversified the research activity, developing new research laboratories and encouraging the academic community to approach modern and competitive research projects. Every year the Physics Department of the University of Bucharest organizes the 'Annual Scientific Conference' to present the most interesting scientific results, obtained within the department. This scientific session is opened also to the interested physics researchers from other institutes and universities in the country. This scientific event represents a recognition and a continuation of the prestigious tradition of physics research performed within University. The scientific research in the Physics Department is performed in groups and research centers, the terminal year undergraduate students and graduate students being involved in a high extent in the research works. There are 5 research centers with the status of Center of excellence in research. The long-term strategy adopted by the faculty was focused on developing the scientific research in modern topics of theoretical, experimental and applied physics, as well as in inter-disciplinary fields as biophysics, medical physics, physics and protection of the environment, physics - computer science. Following this strategy, the Faculty of Physics has diversified the research activity, developing new research laboratories and encouraging the academic community to perform modern and

  4. 2002 Annual Scientific Conference. Program and Abstracts

    International Nuclear Information System (INIS)

    Barborica, Andrei; Bulinski, Mircea; Dinca, Mihai P.

    2002-01-01

    As consequence of a long experience in educational as well as research field the Physics Department of the Bucharest University is offering high-standard undergraduate and graduate programs of higher education in physical sciences. The long-term strategy adopted by the faculty was focused on developing scientific research in modern topics of theoretical, experimental and applied physics as well as in inter-disciplinary fields as biophysics, medical physics, physics and protection of environment, physics-computer science. Following this strategy the Faculty of Physics has diversified the research activity, developing new research laboratories and encouraging the academic community to approach modern and competitive research projects. Every year the Physics Department of the University of Bucharest organizes the 'Annual Scientific Conference' to present the most interesting scientific results, obtained within the department. This scientific session is opened also to the interested physics researchers from other institutes and universities in the country. This scientific event represents a recognition and a continuation of the prestigious tradition of physics research performed within University. The scientific research in the Physics Department is performed in groups and research centers, the terminal year undergraduate students and graduate students being involved in a high extent in the research works. There are 5 research centers with the status of Center of excellence in research. The long-term strategy adopted by the faculty was focused on developing the scientific research in modern topics of theoretical, experimental and applied physics, as well as in inter-disciplinary fields as biophysics, medical physics, physics and protection of the environment, physics - computer science. Following this strategy, the Faculty of Physics has diversified the research activity, developing new research laboratories and encouraging the academic community to perform modern and

  5. Geopolymer obtained from coal ash

    International Nuclear Information System (INIS)

    Conte, V.; Bissari, E.S.; Uggioni, E.; Bernardin, A.M.

    2011-01-01

    Geopolymers are three-dimensional alumino silicates that can be rapidly formed at low temperature from naturally occurring aluminosilicates with a structure similar to zeolites. In this work coal ash (Tractebel Energy) was used as source of aluminosilicate according a full factorial design in eight formulations with three factors (hydroxide type and concentration and temperature) and two-levels. The ash was dried and hydroxide was added according type and concentration. The geopolymer was poured into cylindrical molds, cured (14 days) and subjected to compression test. The coal ash from power plants belongs to the Si-Al system and thus can easily form geopolymers. The compression tests showed that it is possible to obtain samples with strength comparable to conventional Portland cement. As a result, temperature and molarity are the main factors affecting the compressive strength of the obtained geopolymer. (author)

  6. Obtaining and analysis of results of fatigue and corrosion-fatigue in steel API 5L X60; Obtencao e analise de resultados de fadiga e corrosao-fadiga em aco API 5L X60

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Bruno Allison [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais; Silva, Antonio Almeida; Santos, Fabio Gualberto Chagas [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2008-07-01

    The corrosion process allied to the fatigue, due to repetitive efforts of several natures, is the main responsible for the damages in pipeline and offshore structures that results in the appears of located faults, and by the way can results in leaks and financial and environmental loss. This phenomenon calls corrosion-fatigue, however, it is very complex, and mainly, in what it concerns the form as this it develops in the structure. The objective of this work is to present some results of experimental fatigue tests and corrosion-fatigue accomplished with specimen that the material originated a pipeline steel API 5L X60. The tests developed in a machine which could test until 12 specimens per time. For test of corrosion-fatigue was used a cell-of-corrosion especially projected, in this way simulated an aggressive environmental condition in a corrosion conditions. With the results of tests, was possible estimate the fatigue limits of the specimen when submitted to the repeated flexing, and compare it with evaluate corrosion-fatigue graphs, that as the literature comes moved down of the curve, in relation to the fatigue curve. (author)

  7. Quantitative comparison of the results obtained by the multiple-dose guinea pig maximization test and the non-radioactive murine local lymph-node assay for various biocides.

    Science.gov (United States)

    Yamano, Tetsuo; Shimizu, Mitsuru; Noda, Tsutomu

    2005-07-01

    We compared the results of the multiple-dose guinea pig maximization test (GPMT) and the non-radioactive murine local lymph-node assay (LLNA) for various biocides. Thirteen out of 17 positive biocides in the GPMT gave positive results in the LLNA. In the GPMT, the minimum first induction doses ranged over four orders (0.00005-0.5%), while elicitation-threshold doses, which were evaluated using an optimally sensitized group of animals in the multiple-dose studies, ranged over five orders (0.00006-2.8%). In the LLNA, minimum induction doses ranged over more than three orders (0.01-30%). With respect to 13 biocides that were positive in both the GPMT and the LLNA, results were quantitatively compared. When compared after conversion to corresponding area doses (microg/cm), the minimum doses required to elicit skin reaction in guinea pigs were always lower than that for induction in mice with all biocides. Correlation between minimum induction doses from the GPMT and the LLNA seemed poor (r=0.57), while that between minimum induction doses in the LLNA and elicitation-threshold doses in the GPMT was relatively good (r=0.73). The results suggest the possibility to estimate human elicitation-threshold doses, which are definitely lacking in the process of risk assessment for skin-sensitizers, from the data of the LLNA.

  8. Quantitative comparison of the results obtained by the multiple-dose guinea pig maximization test and the non-radioactive murine local lymph-node assay for various biocides

    International Nuclear Information System (INIS)

    Yamano, Tetsuo; Shimizu, Mitsuru; Noda, Tsutomu

    2005-01-01

    We compared the results of the multiple-dose guinea pig maximization test (GPMT) and the non-radioactive murine local lymph-node assay (LLNA) for various biocides. Thirteen out of 17 positive biocides in the GPMT gave positive results in the LLNA. In the GPMT, the minimum first induction doses ranged over four orders (0.00005-0.5%), while elicitation-threshold doses, which were evaluated using an optimally sensitized group of animals in the multiple-dose studies, ranged over five orders (0.00006-2.8%). In the LLNA, minimum induction doses ranged over more than three orders (0.01-30%). With respect to 13 biocides that were positive in both the GPMT and the LLNA, results were quantitatively compared. When compared after conversion to corresponding area doses (μg/cm), the minimum doses required to elicit skin reaction in guinea pigs were always lower than that for induction in mice with all biocides. Correlation between minimum induction doses from the GPMT and the LLNA seemed poor (r = 0.57), while that between minimum induction doses in the LLNA and elicitation-threshold doses in the GPMT was relatively good (r = 0.73). The results suggest the possibility to estimate human elicitation-threshold doses, which are definitely lacking in the process of risk assessment for skin-sensitizers, from the data of the LLNA

  9. Main results obtained in France in the development of the gaseous diffusion process for uranium isotope separation; Principaux resultats obtenus en France dans les etudes sur la separation des isotopes de l'uranium par diffusion gazeuse

    Energy Technology Data Exchange (ETDEWEB)

    Frejacques, C; Bilous, O; Dixmier, J; Massignon, D; Plurien, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The main problems which occur in the study of uranium isotope separation by the gaseous diffusion process, concern the development of the porous barrier, the corrosive nature of uranium hexafluoride and also the chemical engineering problems related to process design and the choice of best plant and stage characteristics. Porous barriers may be obtained by chemical attack of non porous media or by agglomeration of very fine powders. Examples of these two types of barriers are given. A whole set of measurement techniques were developed for barrier structure studies, to provide control and guidance of barrier production methods. Uranium hexafluoride reactivity and corrosive properties are the source of many difficult technological problems. A high degree of plant leak tightness must be achieved. This necessity creates a special problem in compressor bearing design. Barrier lifetime is affected by the corrosive properties of the gas, which may lead to a change of barrier structure with time. Barrier hexafluoride permeability measurements have helped to make a systematic study of this point. Finally an example of a plant flowsheet, showing stage types and arrangements and based on a minimisation of enriched product costs is also given as an illustration of some of the chemical engineering problems present. (author) [French] Les principaux problemes qui se sont poses dans l'etude de la separation des isotopes de l'uranium par diffusion gazeuse, sont ceux relatifs a l'obtention de barrieres poreuses, ceux lies a l'utilisation de l'hexafluorure d'uranium, enfin les problemes de genie chimique relatifs au procede et a l'agencement optimum des etages et des cascades entre elles. On peut obtenir des barrieres poreuses soit par attaque de membranes pleines, soit par agglomeration de poudres de petites dimensions. Des exemples de ces deux types de barrieres seront donnes. L'etude des proprietes de texture des barrieres obtenues, necessaire pour orienter les recherches de

  10. Detection of occlusal caries lesions using fluorescence: correlation between histology and obtained results for Diagnodent and spectroscopy; Deteccao de lesoes de carie por fluorescencia: correlacao entre a histologia e os resultados obtidos com o Diagnodent e a espectroscopia

    Energy Technology Data Exchange (ETDEWEB)

    Rocha-Cabral, Renata Maciel

    2006-07-01

    The aims of this study were to develop and test a method to detect caries lesions in vivo and in vitro, using a portable spectrometer (PS); to analyze the performance of PS as well as the commercial device Diagnodent (Dd); correlate them with the gold standard, their transversal section areas and lesions depth and between themselves. 66 occlusal pre-molars sites were examined in vivo with Dd. Sequentially, fluorescence ({lambda}exc {approx} 657 nm) was collected by an optical fiber, conducted to PS and then analyzed as spectra, which were normalized and had calculated the Ratios of their Areas Under the Curves (RAUC) of carious and sound tissues. Experiments were conducted in vitro in the same sites. Gold Standard was obtained by polarized light microscopy. Pearson correlation was used to compare the devices with transversal section area, lesions depth and between themselves. The area under ROC curve, sensitivity, specificity as well as accuracy were calculated and verified with McNemar test. Dd and RAUC showed statistically significant correlation with gold standard (p < 0.01 for Dd and p < 0.05 for RAUC) and between themselves (r = 0,83 in vivo and r = 0,87 in vitro). Although it was significant, the devices showed low correlation with depth of lesions in vivo and in vitro (r = {approx} 0.43). The transversal section area of the lesion had no influence on readings in both devices. Dd showed higher sensitivity (0.76) than PS (0.60) in vivo (p < 0.05), though this fact was not able to improve its performance. In turn, PS showed higher sensitivity (0.88) than Dd (0.79) in vitro, but this difference was not significantly. The other parameters did not show statistically significant differences (p < 0.05) between methods. PS showed positive correlation with Dd, equal correlation with lesions depth and higher ability of detecting the disease in vitro, what suggests that if accompanied with a conic and an angulated probe and a dedicated software, the PS method could be

  11. Blind pre-analysis of the main building complex WWER-440/213 Paks for comparison of analytical and experimental results obtained by explosive testing (task 7a of workplan 95/96)

    International Nuclear Information System (INIS)

    1999-01-01

    Within the research programme on Benchmark studies of seismic analysis of WWER type reactors the blind pre-analysis must be prepared for the main building complex of Paks NPP, based on given excitations derived from explosion tests. The aim of the investigation was to validate different idealization concepts (mathematical models for the idealization of the structures and the soil) as well as investigation procedures (time domain and frequency domain analysis) and finally the software tools by comparing dynamic properties (eigenfrequencies, eigenmodes, modal values) and structural response results (time histories and response spectra). This report contains results of the blind pre-analysis performed by using three dimensional idealization of the main building complex (reactor building, turbine house, galleries) by means of time and frequency domian calculation procedures

  12. Results of flutter test OS6 obtained using the 0.14-scale wing/elevon model (54-0) in the NASA LaRC 16-foot transonic dynamics wind tunnel

    Science.gov (United States)

    Berthold, C. L.

    1977-01-01

    A 0.14-scale dynamically scaled model of the space shuttle orbiter wing was tested in the Langley Research Center 16-Foot Transonic Dynamics Wind Tunnel to determine flutter, buffet, and elevon buzz boundaries. Mach numbers between 0.3 and 1.1 were investigated. Rockwell shuttle model 54-0 was utilized for this investigation. A description of the test procedure, hardware, and results of this test is presented.

  13. Results of flutter test OS7 obtained using the 0.14-scale space shuttle orbiter fin/rudder model number 55-0 in the NASA LaRC 16-foot transonic dynamics wind tunnel

    Science.gov (United States)

    Berthold, C. L.

    1977-01-01

    A 0.14-scale dynamically scaled model of the space shuttle orbiter vertical tail was tested in a 16-foot transonic dynamic wind tunnel to determine flutter, buffet, and rudder buzz boundaries. Mach numbers between .5 and 1.11 were investigated. Rockwell shuttle model 55-0 was used for this investigation. A description of the test procedure, hardware, and results of this test is presented.

  14. Verified scientific findings

    International Nuclear Information System (INIS)

    Bullinger, M.G.

    1982-01-01

    In this essay, the author attempts to enlighten the reader as to the meaning of the term ''verified scientific findings'' in section 13, sub-section 1, sentence 2 of the new Chemicals Control Law. The examples given here are the generally accepted regulations in regards to technology (that is sections 7a and 18b of the WHG (law on water economy), section 3, sub-section 1 of the machine- and engine protection laws) and to the status of technology (section 3, sub-section 6 of the BImSchG (Fed. law on prevention of air-borne pollution)), and to the status of science (section 5, sub-section 2 of the AMG (drug legislation). The ''status of science and technology'' as defined in sections 4 ff of the Atomic Energy Law (AtomG) and in sections 3, 4, 12, 2) of the First Radiation Protection Ordinance (1.StrlSch. VO), is also being discussed. The author defines the in his opinion ''dynamic term'' as the generally recognized result of scientific research, and the respective possibilities of practical utilization of technology. (orig.) [de

  15. Nikolaj Nikolaevich Bogolubov. Sketch of the scientific work

    International Nuclear Information System (INIS)

    Bogolyubov, N.N.; Sankovich, D.P.

    1993-01-01

    The article contains the review of main scientific results of the distinguished mathematician and physicist-theorist, Academician N.N.Bouolubov. The results were obtained in the differential equation theory, calculus of variations, theory of almost periodical functions, nonlinear mechanics, statistical physics and quantum field theory. A significance of the fundamental investigations of Bogolubov for development of the modern mathematical physics is shown. 115 refs

  16. [Summary: Scientific evaluation of EMDR psychotherapy].

    Science.gov (United States)

    Haour, F; de Beaurepaire, C

    2016-06-01

    The evaluation of psychotherapy methods is made difficult by their practical and theoretical diversities as well as the increasing number of available therapies. Evaluation based on scientific criteria in randomized control trials is providing the highest level of proof and recognition by Health Agencies. A recently described integrative psychotherapy, eye movement desensitization and reprocessing (EMDR), developed by F. Shapiro since 1989, has been confronted with the validation procedure used in pharmacological treatment. It was of interest to review the scientific validation steps carried out for this EMDR psychotherapy and for its mechanisms of action. The practical and methodological protocol of the EMDR psychotherapy for trauma integration is reviewed as well as clinical results and mechanisms. This EMDR therapy, focused on the resolutions of traumas, was started by treating patients with post-traumatic stress disorders (PTSD). The integrative EMDR protocol obtained the highest level of efficiency, for PTSD treatment, twenty years after its first publication. The efficiency of the protocol is now under study and scientific evaluation for troubles in which the trauma experiences are triggers or factors of maintenance of the troubles: anxiety, depression, phobia, sexual troubles, schizophrenia, etc. This new integrative psychotherapy follows the pathways and the timing observed for the evaluation and the validation of other therapies. Copyright © 2016 L'Encéphale, Paris. Published by Elsevier Masson SAS. All rights reserved.

  17. Evaluation of the quality of results obtained in institutions participating in interlaboratory experiments and of the reliability characteristics of the analytical methods used on the basis of certification of standard soil samples

    Energy Technology Data Exchange (ETDEWEB)

    Parshin, A.K.; Obol' yaninova, V.G.; Sul' dina, N.P.

    1986-08-20

    Rapid monitoring of the level of pollution of the environment and, especially, of soils necessitates preparation of standard samples (SS) close in properties and material composition to the objects to be analyzed. During 1978-1982 four sets (three types of samples in each) of State Standard Samples of different soils were developed: soddy-podzolic sandy-loamy, typical chernozem, krasnozem, and calcareous sierozem. The certification studies of the SS of the soils were carried out in accordance with the classical scheme of interlab experiment (ILE). More than 100 institutions were involved in the ILE and the total number of independent analytical results was of the order of 10/sup 4/. With such a volume of analytical information at their disposal they were able to find some general characteristics intrinsic to certification studies, to assess the quality of work of the ILE participants with due regard for their specialization, and the reliability characteristics of the analytical methods used.

  18. Summarizing report on results obtained by institutions in Germany and Switzerland applying high-resolution detectors for health physics monitoring; Zusammenfassender Bericht ueber die Inkorporationsmessstellen mit hochaufloesenden Detektoren in Deutschland und der Schweiz

    Energy Technology Data Exchange (ETDEWEB)

    Sahre, P. [Verein fuer Kernverfahrenstechnik und Analytik Rossendorf e.V., Dresden (Germany)

    1997-12-01

    In order to gather as much information as possible about the performance of high-resolution detectors in whole-body and partial-body counters, a questionnaire was distributed to those health physics monitoring institutions in Germany and Switzerland known to apply such instruments. The inquiry also covered institutions in Prague, Budapest, and Seibersdorf which participate in activities of the AKI. The results of the inquiry are given in tabulated form. (orig./CB) [Deutsch] Um moeglichst viele Informationen ueber Ganz- und Teilkoerperzaehler, die mit hochaufloesenden Detektoren arbeiten, zu erfassen, wurde an alle in Deutschland und in der Schweiz arbeitenden Inkorporationsmessstellen ein Formular zur Erfassung von Erfahrungen mit hochaufloesenden Detektoren gesendet. In die Abfrage einbezogen wurden auch Messstellen aus Prag, Budapest und Seibersdorf, die im AKI involviert sind. Die Ergebnisse der Umfrage fuer Ganzkoerperzaehler und fuer Teilkoerperzaehler werden tabellarisch zusammengefasst. (orig./SR)

  19. Alecto - results obtained with homogeneous critical experiments on plutonium 239, uranium 235 and uranium 233; Alecto - resultats des experiences critiques homogenes realisees sur le plutonium 239, l'uranium 235 et l'uranium 233

    Energy Technology Data Exchange (ETDEWEB)

    Bruna, J G; Brunet, J P; Caizegues, R; Clouet d' Orval, Ch; Kremser, J; Tellier, H; Verriere, Ph [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    In this report are given the results of the homogeneous critical experiments ALECTO, made on plutonium 239, uranium 235 and uranium 233. After a brief description of the equipment, the critical masses for cylinders of diameters varying from 25 to 42 cm, are given and compared with other values (foreign results, criticality guide). With respect to the specific conditions of neutron reflection in the ALECTO experiments the minimal values of critical masses are: Pu239 M{sub c} = 910 {+-} 10 g, U235 M{sub c} = 1180 {+-} 12 g and U233 M{sub c} = 960 {+-} 10 g. Experiments relating to cross sections and constants to be used on these materials are presented. Lastly, kinetic experiments allow to compare pulsed neutron methods to fluctuation methods. [French] On presente dans ce rapport les resultats des experiences critiques homogenes ALECTO, effectuees sur le plutonium 239, l'uranium 235 et l'uranium 233. Apres avoir rappele la description des installations, on donne les masses critiques pour des cylindres de diametres variant entre 25 et 42 cm, qui sont comparees avec d'autres chiffres (resultats etrangers, guide de criticite). Dans les gammes des diametres etudies pour des cuves a fond plat reflechies lateralement, la valeur minimale des masses critiques est la suivante: Pu239 M{sub c} = 910 {+-} 10 g, U235 M{sub c} = 1180 {+-} 12 g et U233 M{sub c} 960 {+-} 10 g. Des experiences portant sur les sections efficaces et les constantes a utiliser sur ces milieux sont ensuite presentees. Enfin des experiences de cinetique permettent une comparaison entre la methode des neutrons pulses et la methode des fluctuations. (auteur)

  20. The martial art of scientific publication

    Science.gov (United States)

    Parker, E. N.

    Publication of scientific results in refereed journals is an essential part of the scientific process. It is the final payoff for the obscure labors that compose scientific research. Unfortunately, effective operation of the publication procedure requires simultaneous rational scientific judgment on the part of the author, the referee, and the editor, and the coincidence of all of these cannot be taken for granted on every given occasion. There are times when the working definition of truth is taken to be the consensus of one's scientific intimates: the “good old boys.” Anything outside that limited horizon is discomforting and improper and is to be barred from consideration.

  1. La influencia de la densidad competitiva en el resultado de los equipos en el fútbol de alto nivel. (The influence of a congested football calendar on the results obtained by teams in professional soccer.

    Directory of Open Access Journals (Sweden)

    Joaquín Lago Ballesteros

    2009-01-01

    Full Text Available Resumen Existe una considerable variación en el número de partidos disputados por los equipos de fútbol durante una temporada. Los mejores equipos juegan varios partidos a la semana tanto en las competiciones domesticas como en la Liga de Campeones. Se ha especulado que un período cargado de partidos puede limitar el rendimiento de los conjuntos. En este trabajo se estudia el efecto que tiene para un equipo disputar un partido de la Liga de Campeones sobre el resultado alcanzado en el encuentro de la Liga Española en el fin de semana anterior. La muestra consiste en 374 partidos de la Liga Española jugados por los equipos que se encontraban simultáneamente disputando la Liga de Campeones entre las temporadas 2003-2004 y 2006- 2007. Los resultados alcanzados mediante un modelo logit multinomial permiten demostrar que disputar un partido de la Liga de Campeones no reduce la probabilidad de ganar en el partido de la Liga Española. Además se ha verificado que la probabilidad de ganar en el partido del fin de semana de la Liga Española es mayor cuando el partido de la Liga de Campeones a disputar pertenece a la fase de liguilla respecto a si se corresponde con el formato de eliminación directa.Palabras clave: fútbol; liga española; liga de campeones; logit multinomial; densidad competitive. Abstract There is a considerable variation in the number of matches played per season by clubs in the Spanish Soccer. The successful top clubs play several matches a week in domestic leagues as well as in the UEFA Champions League. It has been speculated that a period full of matches can lead to player fatigue which may result in underperformance. Using data from 374 matches of the Spanish Soccer League played from the 2003-04 to the 2006-07 seasons and according to the estimation based on logit multinomial this study shows that Spanish Champions League teams did not perform below their normal standard at the weekend when they played a Champions

  2. Analysis of personnel monitoring results of external radiation doses received by occupationally exposed workers obtained using CaSO4: Dy TLD personnel monitoring badges at RAPS (2000-2004)

    International Nuclear Information System (INIS)

    Chourasiya, G.; Kher, R.K.; Rao, B.S.; Pradhan, S.M.

    2006-01-01

    Personnel monitoring is a key step in radiation protection programme. It helps in keeping a check on radiation hazards and safety aspects of the operating unit. Moreover, analysis of the temporal trends in exposure histories of the individuals/groups play an important role in assessing the need of improved standards of protection and the impact of implementation of such measures. The paper presents the analysis of annual effective dose and collective dose to the radiation workers, which are indicators of individual risk and the impact of the practice. The present study also gives the analysis of the effective dose, cumulative dose and various dose distribution ratios (SR E and NR E ) for the block of 5 years (2000-2004) of RAPS 1 and 2 the oldest PHWR in the country and RAPS 3 and 4 the latest in the series incorporating many improvements in design and operation. It is seen that occupational exposures at NPPs have been showing a steadily decreasing trend, which is a result of a number of design improvements, operation and protection measures. However, to achieve world standards, we have to go a long way by further carrying out identification of areas of improvement, good operating practices along with the desired modifications in design. (author)

  3. Obtaining zircaloy powder through hydriding

    International Nuclear Information System (INIS)

    Dupim, Ivaldete da Silva; Moreira, Joao M.L.

    2009-01-01

    Zirconium alloys are good options for the metal matrix in dispersion fuels for power reactors due to their low thermal neutron absorption cross-section, good corrosion resistance, good mechanical strength and high thermal conductivity. A necessary step for obtaining such fuels is producing Zr alloy powder for the metal matrix composite material. This article presents results from the Zircaloy-4 hydrogenation tests with the purpose to embrittle the alloy as a first step for comminuting. Several hydrogenation tests were performed and studied through thermogravimetric analysis. They included H 2 pressures of 25 and 50 kPa and temperatures ranging between from 20 to 670 deg C. X-ray diffraction analysis showed in the hydrogenated samples the predominant presence of ZrH 2 and some ZrO 2 . Some kinetics parameters for the Zircaloy-4 hydrogenation reaction were obtained: the time required to reach the equilibrium state at the dwell temperature was about 100 minutes; the hydrogenation rate during the heating process from 20 to 670 deg C was about 21 mg/h, and at constant temperature of 670 deg C, the hydride rate was about 1.15 mg/h. The hydrogenation rate is largest during the heating process and most of it occurs during this period. After hydrogenated, the samples could easily be comminuted indicating that this is a possible technology to obtain Zircaloy powder. The results show that only few minutes of hydrogenation are necessary to reach the hydride levels required for comminuting the Zircaloy. The final hydride stoichiometry was between 2.7 and 2.8 H for each Zr atom in the sample (author)

  4. Evaluation of real-time data obtained from gravimetric preparation of antineoplastic agents shows medication errors with possible critical therapeutic impact: Results of a large-scale, multicentre, multinational, retrospective study.

    Science.gov (United States)

    Terkola, R; Czejka, M; Bérubé, J

    2017-08-01

    Medication errors are a significant cause of morbidity and mortality especially with antineoplastic drugs, owing to their narrow therapeutic index. Gravimetric workflow software systems have the potential to reduce volumetric errors during intravenous antineoplastic drug preparation which may occur when verification is reliant on visual inspection. Our aim was to detect medication errors with possible critical therapeutic impact as determined by the rate of prevented medication errors in chemotherapy compounding after implementation of gravimetric measurement. A large-scale, retrospective analysis of data was carried out, related to medication errors identified during preparation of antineoplastic drugs in 10 pharmacy services ("centres") in five European countries following the introduction of an intravenous workflow software gravimetric system. Errors were defined as errors in dose volumes outside tolerance levels, identified during weighing stages of preparation of chemotherapy solutions which would not otherwise have been detected by conventional visual inspection. The gravimetric system detected that 7.89% of the 759 060 doses of antineoplastic drugs prepared at participating centres between July 2011 and October 2015 had error levels outside the accepted tolerance range set by individual centres, and prevented these doses from reaching patients. The proportion of antineoplastic preparations with deviations >10% ranged from 0.49% to 5.04% across sites, with a mean of 2.25%. The proportion of preparations with deviations >20% ranged from 0.21% to 1.27% across sites, with a mean of 0.71%. There was considerable variation in error levels for different antineoplastic agents. Introduction of a gravimetric preparation system for antineoplastic agents detected and prevented dosing errors which would not have been recognized with traditional methods and could have resulted in toxicity or suboptimal therapeutic outcomes for patients undergoing anticancer treatment.

  5. Scientific and Technical Report, 1997

    International Nuclear Information System (INIS)

    Metivier, Henri; Mur, Emmanuelle

    1998-01-01

    This report highlights the most significant scientific and technical achievements of the Institute of Nuclear Protection and Safety in 1997. In all 23 reports are grouped in the following 7 sections: 1.Reactor safety; 2.Safety of nuclear facility; 3.Safeguards for radioactive materials and transports; 4.Public protection; 5.Environment protection; 6.Radioactive waste safety; 7.Crisis management. Special attention is paid to the pressurized water and fast neutron reactors and, accordingly, the program PHEBUS PF and the first results obtained with it concerning nuclear safety are reported. The safety of nuclear fuel cycle and spent fuel storage is addressed in a couple of reports, as well as the problem of inspection, measurement and containers for nuclear materials. Concerning the public and environment protection, studies are reported on medical surveillance of people working with CEA Group, and clinical dosimetric follow-up of radiological events as well as the strategy of contaminated site rehabilitation. In the field of radioactive waste management, the IPSN project of Tournemire tunnel and the project of deep disposal are presented. Finally, the issue of major nuclear accidents is approached through the exercise Becquerel, the SESAME system of predicting the radioactive products release in PWR reactors and ASTRAL, the evaluation system of aftermath of an accidental environmental contamination by radioactive release. Each section of this IPSN report is opened by a review paper

  6. A Systematic Approach for Obtaining Performance on Matrix-Like Operations

    Science.gov (United States)

    Veras, Richard Michael

    Scientific Computation provides a critical role in the scientific process because it allows us ask complex queries and test predictions that would otherwise be unfeasible to perform experimentally. Because of its power, Scientific Computing has helped drive advances in many fields ranging from Engineering and Physics to Biology and Sociology to Economics and Drug Development and even to Machine Learning and Artificial Intelligence. Common among these domains is the desire for timely computational results, thus a considerable amount of human expert effort is spent towards obtaining performance for these scientific codes. However, this is no easy task because each of these domains present their own unique set of challenges to software developers, such as domain specific operations, structurally complex data and ever-growing datasets. Compounding these problems are the myriads of constantly changing, complex and unique hardware platforms that an expert must target. Unfortunately, an expert is typically forced to reproduce their effort across multiple problem domains and hardware platforms. In this thesis, we demonstrate the automatic generation of expert level high-performance scientific codes for Dense Linear Algebra (DLA), Structured Mesh (Stencil), Sparse Linear Algebra and Graph Analytic. In particular, this thesis seeks to address the issue of obtaining performance on many complex platforms for a certain class of matrix-like operations that span across many scientific, engineering and social fields. We do this by automating a method used for obtaining high performance in DLA and extending it to structured, sparse and scale-free domains. We argue that it is through the use of the underlying structure found in the data from these domains that enables this process. Thus, obtaining performance for most operations does not occur in isolation of the data being operated on, but instead depends significantly on the structure of the data.

  7. Results in energy saving obtained with the application of speed variator in fossil power stations; Resultados de ahorro de energia obtenidos con la aplicacion de variadores de velocidad en centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Merlos Rueda, Rosa Maria [Programa de Ahorro de Energia del Sector Electrico (PAESE), Mexico, D. F. (Mexico)

    1999-07-01

    The project of installation of speed variator in fossil power stations (CT's) of Comision Federal de Electricidad (CFE), as an energy saving measure, is a pilot project that began with the support of the Subdivision de Generacion, and promoted by the Energy Saving Program of the Electric Sector (PAESE), with the putting in operation of an equipment in the condensate pump of the Punta Prieta II C. T. U3. The energy saving observed was substantial, fluctuating between the 19.4% at high loads (at 90% load) and the 71.1% at low loads (at 40% load) of the generating unit. With these results, it was decided to extend the scope of the project with the installation of 6 more equipment for equal number of fossil power stations, located in 4 of the 5 Regions of Generation. The fossil power stations, selected for this stage of the project were: C. T. Felipe Carrillo Puerto U1, C.T. Lerma U4, C.T. Salamanca U1, C.T. Monterrey U6, C.T. Francisco Villa U3 and the C.T. Punta Prieta II-U1. The equipment was in operation during the first quarter of 1998, and the first results indicate an energy savings average per equipment, between 39% and 52%. The recovery of the investment fluctuates between the 48.4% and the 87.6% in less than two years of operation, with which a maximum period of recovery of 3 years is expected. The estimated potential of energy saving, considering the application of these devices in condensate pumps, feedwater pumps (where no speed variator is installed) forced draft fans, induced draft fans and gas recirculation fans, as well as circulation water pumps, of the existing Generating Power stations, ascends to an annual total of 830,000, which represents an approximate 9.4% of the National consumption of self services. [Spanish] El proyecto de instalacion de variadores de velocidad en Centrales Termoelectricas (CT's) de la Comision Federal de Electricidad (CFE), como medida de ahorro de energia, es un proyecto piloto que se inicio con el apoyo de la

  8. The Data Evaluation for Obtaining Accuracy and Reliability

    International Nuclear Information System (INIS)

    Kim, Chang Geun; Chae, Kyun Shik; Lee, Sang Tae; Bhang, Gun Woong

    2012-01-01

    Nemours scientific measurement results are flooded from the paper, data book, etc. as fast growing of internet. We meet many different measurement results on the same measurand. In this moment, we are face to choose most reliable one out of them. But it is not easy to choose and use the accurate and reliable data as we do at an ice cream parlor. Even expert users feel difficult to distinguish the accurate and reliable scientific data from huge amount of measurement results. For this reason, the data evaluation is getting more important as the fast growing of internet and globalization. Furthermore the expressions of measurement results are not in standardi-zation. As these need, the international movement has been enhanced. At the first step, the global harmonization of terminology used in metrology and the expression of uncertainty in measurement were published in ISO. These methods are wide spread to many area of science on their measurement to obtain the accuracy and reliability. In this paper, it is introduced that the GUM, SRD and data evaluation on atomic collisions.

  9. Autonomy vs. dependency of scientific collaboration in scientific performance

    Energy Technology Data Exchange (ETDEWEB)

    Chinchilla-Rodriguez, Z.; Miguel, S.; Perianes-Rodriguez, A.; Ovalle-Perandones, M.A.; Olmeda-Gomez, C.

    2016-07-01

    This article explores the capacity of Latin America in the generation of scientific knowledge and its visibility at the global level. The novelty of the contribution lies in the decomposition of leadership, plus its combination with the results of performance indicators. We compare the normalized citation of all output against the leading output, as well as scientific excellence (Chinchilla, et al. 2016a; 2016b), technological impact and the trends in collaboration types and normalized citation. The main goal is to determine to what extent the main Latin American producers of scientific output depend on collaboration to heighten research performance in terms of citation; or to the contrary, whether there is enough autonomy and capacity to leverage its competitiveness through the design of research and development agendas. To the best of our knowledge this is the first study adopting this approach at the country level within the field of N&N. (Author)

  10. First results obtained by the Cluster STAFF experiment

    Czech Academy of Sciences Publication Activity Database

    Cornilleau-Wehrlin, N.; Chanteur, G.; Perraut, S.; Rezeau, L.; Robert, P.; Roux, A.; Villedary de, C.; Canu, P.; Maksimovic, M.; Conchy de, Y.; Hubert, D.; Lacombe, C.; Lefeuvre, F.; Parrot, M.; Pincon, J. L.; Decrau, P. M. E.; Harvey, C. C.; Louarn, Ph.; Santolík, Ondřej; Alleyne, H. St. C.; Roth, M.; Chust, T.; Contel Le, O.

    2003-01-01

    Roč. 21, - (2003), s. 437-456 ISSN 0992-7689 R&D Projects: GA ČR GA202/03/0832; GA MŠk ME 650 Institutional research plan: CEZ:AV0Z3042911 Keywords : magnetospheric physics * space plasma physics Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 1.031, year: 2003

  11. Calibration results obtained with Liulin-4 type dosimeters

    Czech Academy of Sciences Publication Activity Database

    Dacheva, T.; Tomova, B.; Matviichuka, Y.; Dimitrova, P.; Lemaireb, J.; Gregoirec, G.; Cyamukunguc, M.; Schmitzc, H.; Fujitakad, K.; Uchihorid, Y.; Kitamurad, H.; Reitze, G.; Beaujeanf, R.; Petrovg, V.; Shurshakovg, V.; Benghing, V.; Spurný, František

    2002-01-01

    Roč. 30, č. 4 (2002), s. 917-925 ISSN 0273-1177 Institutional research plan: CEZ:AV0Z1048901 Keywords : CERN high-energy reference field * detector * dosimeter Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 0.448, year: 2002

  12. The Power of Optical/IR Interferometry: Recent Scientific Results and 2nd Generation Instrumentation Proceedings of the ESO Workshop held in Garching, Germany, 4-8 April 2005

    CERN Document Server

    Richichi, A; Paresce, F; Chelli, A

    2008-01-01

    Long-baseline interferometry has been traditionally regarded as a very technical method with a limited number of applications. At the turn of the millennium, with the introduction of large community-oriented facilities such as the VLTI, we are seeing a transformation into a major astronomical technique, with a corresponding dramatic increase in the number of publications. This book marks this transition, by providing a wide and deep insight into a large number of diverse and compelling results recently obtained by long-baseline interferometers. It also provides an insight into concepts which form the basis of future instruments and further developments in this technique.

  13. Age and Scientific Performance.

    Science.gov (United States)

    Cole, Stephen

    1979-01-01

    The long-standing belief that age is negatively associated with scientific productivity and creativity is shown to be based upon incorrect analysis of data. Studies reported in this article suggest that the relationship between age and scientific performance is influenced by the operation of the reward system. (Author)

  14. Scientific Notation Watercolor

    Science.gov (United States)

    Linford, Kyle; Oltman, Kathleen; Daisey, Peggy

    2016-01-01

    (Purpose) The purpose of this paper is to describe visual literacy, an adapted version of Visual Thinking Strategy (VTS), and an art-integrated middle school mathematics lesson about scientific notation. The intent of this lesson was to provide students with a real life use of scientific notation and exponents, and to motivate them to apply their…

  15. Scientific rigor through videogames.

    Science.gov (United States)

    Treuille, Adrien; Das, Rhiju

    2014-11-01

    Hypothesis-driven experimentation - the scientific method - can be subverted by fraud, irreproducibility, and lack of rigorous predictive tests. A robust solution to these problems may be the 'massive open laboratory' model, recently embodied in the internet-scale videogame EteRNA. Deploying similar platforms throughout biology could enforce the scientific method more broadly. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Rediscovering the scientific ethos

    DEFF Research Database (Denmark)

    Djørup, Stine

    The doctoral dissertation discusses some of the moral standards of good scientific practice that areunderexposed in the literature. In particular, attempts are made to correct the conceptual confusionsurrounding the norm of 'disinterestedness' in science (‘uhildethed’), and the norm of scientific...

  17. The Development of Nanotechnologies and Advanced Materials Industry in Science and Entrepreneurship: Scientific Indicators. A Case Study of Latvia (Part Three)

    Science.gov (United States)

    Geipele, S.; Geipele, I.; Kauskale, L.; Zeltins, N.; Staube, T.; Pudzis, E.

    2017-10-01

    The present scientific paper is the third part and continuation of the indepth scientific study of the developed system of engineering economic indicators, where the authors obtain results from the scientific research presented in a series of works on the development of the nanotechnologies and advanced materials industry in science and entrepreneurship in Latvia. Part three determines the crucial scientific indicators of the development of nano-field at the macro, micro, and meso development levels of the economic environment in Latvia. The paper provides the interaction of new identified indicators of nanofield in terms of further scientific and practical activities. Latvia is analysed in comparison with other countries in the world.

  18. The main results of fulfilment in 1996 of the scientific part of the State programme of the Republic of Belarus for minimization and overcoming of the Chernobyl NPP accident consequences (1996-2000)

    International Nuclear Information System (INIS)

    Konoplya, E.F.

    1997-01-01

    In the publication are summarized the basic results of the researches executed in 1996 in the framework of the 'Scientific maintenance of the decision of problems of the Chernobyl NPP accident consequences' of the State program of Republic of Belarus for minimization and overcoming of the Chernobyl NPP accident consequences on 1996-2000 on the following directions: dose monitoring of the population, estimation and forecast of both collective irradiation dozes and risks of radiation induced diseases; development and optimization of a complex of measures for effective land use and decrease of radioactive contamination of agricultural production in order to reduce irradiation dozes of the population; development of complex technologies and means of decontamination, processing and burial of radioactive wastes; development of the measures for increase of radiation protection of the population of Belarus during of the reducing period after the Chernobyl accident; development of complex system of an estimation and decision-making on problems of radiation protection of the population living on contaminated territories; study of influence of radiological consequences of the Chernobyl accident on health of people, development of methods and means of diagnostics, treatment and preventive maintenance of diseases for various categories of the victims; development of effective methods of preventive maintenance and treatment of diseases of both mother and child in conditions of influence of the Chernobyl NPP accident consequences; study of genetic consequences caused by the Chernobyl accident and development of effectual measures of their prevention; creation of the effective both prophylactic means and food additives for treatment and rehabilitation of the persons having suffered after the Chernobyl accident; study of the radioisotopes behaviour dynamics in environment (air, water, ground), ecosystems and populated areas; optimization of the system of radiation ecological

  19. Incorporating Cutting Edge Scientific Results from the Margins-Geoprisms Program into the Undergraduate Curriculum, Rupturing Continental Lithosphere Part II: Introducing Euler Poles Using Baja-North America Relative Plate Motion Across the Gulf of California

    Science.gov (United States)

    Loveless, J. P.; Bennett, S. E. K.; Cashman, S. M.; Dorsey, R. J.; Goodliffe, A. M.; Lamb, M. A.

    2014-12-01

    The NSF-MARGINS Program funded a decade of research on continental margin processes. The NSF-GeoPRISMS Mini-lesson Project, funded by NSF-TUES, is designed to integrate the significant findings from the MARGINS program into open-source college-level curriculum. The Gulf of California (GOC) served as the focus site for the Rupturing Continental Lithosphere (RCL) initiative, which addressed several scientific questions: What forces drive rift initiation, localization, propagation and evolution? How does deformation vary in time and space, and why? How does crust evolve, physically and chemically, as rifting proceeds to sea-floor spreading? What is the role of sedimentation and magmatism in continental extension? We developed two weeks of curriculum, including lectures, labs, and in-class activities that can be used as a whole or individually. This component of the curriculum introduces students to the Euler pole description of relative plate motion (RPM) by examining the tectonic interactions of the Baja California microplate and North American plate. The plate boundary varies in rift obliquity along strike, from highly oblique and strike-slip dominated in the south to slightly less oblique and with a larger extensional component in the north. This Google Earth-based exercise provides students with a visualization of RPM using small circle contours of the local direction and magnitude of Baja-North America movement on a spherical Earth. Students use RPM to calculate the fault slip rates on transform, normal, and oblique-slip faults and examine how the varying faulting styles combine to accommodate RPM. MARGINS results are integrated via comparison of rift obliquity with the structural style of rift-related faults around the GOC. We find this exercise to fit naturally into courses about plate tectonics, geophysics, and especially structural geology, given the similarity between Euler pole rotations and stereonet-based rotations of structural data.

  20. Utility of radiotracer methodology in scientific research of industrial relevancy

    International Nuclear Information System (INIS)

    Kolar, Z.I.

    1990-01-01

    Utilization of radiotracer methodology in industrial research provides substantial scientific rather than directly demonstrable economic benefits. These benefits include better understanding of industrial processes and subsequently the development of new ones. Examples are given of the use of radiotracers in technological studies and the significance of the obtained results is put down. Creative application of radiotracer methodology may contribute to the economic development and technological advancement of all countries including the developing ones. (orig.) [de

  1. Clustering of scientific citations in Wikipedia

    DEFF Research Database (Denmark)

    Nielsen, Finn Årup

    The instances of templates in Wikipedia form an interesting data set of structured information. Here I focus on the cite journal template that is primarily used for citation to articles in scientific journals. These citations can be extracted and analyzed: Non-negative matrix factorization...... is performed on a (article x journal) matrix resulting in a soft clustering of Wikipedia articles and scientific journals, each cluster more or less representing a scientific topic....

  2. The Revista Scientific

    Directory of Open Access Journals (Sweden)

    Oscar Antonio Martínez Molina

    2017-02-01

    Full Text Available The Revista Scientific aims to publish quality papers that include the perspective of analysis in educational settings. Together with www.indtec.com.ve, this electronic publication aims to promote and disseminate, with seriousness and rigor, the academic production in this field. Editorial of the new stage Revista Scientific was created with the aim of constituting a reference space for scientific research in the field of research analysis that is carried out within the universities in Latin America, once the distribution list hosted on the INDTEC platform (http://www.indtec.com.ve is consolidated as a space for dissemination and development of new ideas and initiatives. The first presentation of INDTEC Magazine was held in August 2016 in Venezuela. Thanks to the support of the INDTEC platform, SCIENTIFIC Magazine has been able to develop from the cooperative work of the people who make up its Editorial Committee, Academic Committee and Scientific Committee in Electronic Edition, and of the referees of each one of the numbers. Part of the success is due to the motivation of its co-editors and excellent professionals from different parts of the world: Argentina, Belgium, Colombia, Cuba, Ecuador, Spain, Mexico, Venezuela, which form the various committees, with enthusiasm and joy participating in this project (whose organizational structure is presented in this edition and continues in increcendo. Also, the strategy adopted to edit a monographic number from the various events organized in the framework of the universities, has contributed to provide SCIENTIFIC with a point value speaker of intellectual progress in the field of education. SCIENTIFIC Magazine is currently indexed in ISI, International Scientific Indexing, Dubai - UAE; ROAD, the Directory of Open Access Scholarly Resources (ISSN International Center, France; REVENCYT-ULA, Venezuela; Google Scholar (Google Scholar, International Index; Published in Calaméo; ISSUU; Academia

  3. Scientific Journal Indexing

    Directory of Open Access Journals (Sweden)

    Getulio Teixeira Batista

    2007-08-01

    Full Text Available It is quite impressive the visibility of online publishing compared to offline. Lawrence (2001 computed the percentage increase across 1,494 venues containing at least five offline and five online articles. Results shown an average of 336% more citations to online articles compared to offline articles published in the same venue. If articles published in the same venue are of similar quality, then they concluded that online articles are more highly cited because of their easier access. Thomson Scientific, traditionally concerned with printed journals, announced on November 28, 2005, the launch of Web Citation Index™, the multidisciplinary citation index of scholarly content from institutional and subject-based repositories (http://scientific.thomson. com/press/2005/8298416/. The Web Citation Index from the abstracting and indexing (A&I connects together pre-print articles, institutional repositories and open access (OA journals (Chillingworth, 2005. Basically all research funds are government granted funds, tax payer’s supported and therefore, results should be made freely available to the community. Free online availability facilitates access to research findings, maximizes interaction among research groups, and optimizes efforts and research funds efficiency. Therefore, Ambi-Água is committed to provide free access to its articles. An important aspect of Ambi-Água is the publication and management system of this journal. It uses the Electronic System for Journal Publishing (SEER - http://www.ibict.br/secao.php?cat=SEER. This system was translated and customized by the Brazilian Institute for Science and Technology Information (IBICT based on the software developed by the Public Knowledge Project (Open Journal Systems of the British Columbia University (http://pkp.sfu.ca/ojs/. The big advantage of using this system is that it is compatible with the OAI-PMH protocol for metadata harvesting what greatly promotes published articles

  4. Diffusion of scientific credits and the ranking of scientists

    Science.gov (United States)

    Radicchi, Filippo; Fortunato, Santo; Markines, Benjamin; Vespignani, Alessandro

    2009-11-01

    Recently, the abundance of digital data is enabling the implementation of graph-based ranking algorithms that provide system level analysis for ranking publications and authors. Here, we take advantage of the entire Physical Review publication archive (1893-2006) to construct authors’ networks where weighted edges, as measured from opportunely normalized citation counts, define a proxy for the mechanism of scientific credit transfer. On this network, we define a ranking method based on a diffusion algorithm that mimics the spreading of scientific credits on the network. We compare the results obtained with our algorithm with those obtained by local measures such as the citation count and provide a statistical analysis of the assignment of major career awards in the area of physics. A website where the algorithm is made available to perform customized rank analysis can be found at the address http://www.physauthorsrank.org.

  5. Scientific meeting abstracts

    International Nuclear Information System (INIS)

    1999-01-01

    The document is a collection of the scientific meeting abstracts in the fields of nuclear physics, medical sciences, chemistry, agriculture, environment, engineering, different aspects of energy and presents research done in 1999 in these fields

  6. Identifying Strategic Scientific Opportunities

    Science.gov (United States)

    As NCI's central scientific strategy office, CRS collaborates with the institute's divisions, offices, and centers to identify research opportunities to advance NCI's vision for the future of cancer research.

  7. Visualization in scientific computing

    National Research Council Canada - National Science Library

    Nielson, Gregory M; Shriver, Bruce D; Rosenblum, Lawrence J

    1990-01-01

    The purpose of this text is to provide a reference source to scientists, engineers, and students who are new to scientific visualization or who are interested in expanding their knowledge in this subject...

  8. The Scientific Enterprise

    Indian Academy of Sciences (India)

    Srimath

    The phrase pre-modern scientific may be used to describe certain attitudes and ..... But unfortunately, in the general atmosphere of poor education and collective fears .... present day science and technology that old time beliefs and traditional ...

  9. WITHER SCIENTIFIC AND TECHNOLOGICAL

    African Journals Online (AJOL)

    No library or information service and especially in a developing .... Good public relations, consultancy services including bilateral and ... project proposal for the creation of a scientific and technological information ... For example, in 1995 the ...

  10. Shaping a Scientific Self

    DEFF Research Database (Denmark)

    Andrade-Molina, Melissa; Valero, Paola

    us to understand how a truth is reproduced, circulating among diverse fields of human knowledge. Also it will show why we accept and reproduce a particular discourse. Finally, we state Euclidean geometry as a truth that circulates in scientific discourse and performs a scientific self. We unfold...... the importance of having students following the path of what schools perceive a real scientist is, no to become a scientist, but to become a logical thinker, a problem solver, a productive citizen who uses reason....

  11. Open scientific communication urged

    Science.gov (United States)

    Richman, Barbara T.

    In a report released last week the National Academy of Sciences' Panel on Scientific Communication and National Security concluded that the ‘limited and uncertain benefits’ of controls on the dissemination of scientific and technological research are ‘outweighed by the importance of scientific progress, which open communication accelerates, to the overall welfare of the nation.’ The 18-member panel, chaired by Dale R. Corson, president emeritus of Cornell University, was created last spring (Eos, April 20, 1982, p. 241) to examine the delicate balance between open dissemination of scientific and technical information and the U.S. government's desire to protect scientific and technological achievements from being translated into military advantages for our political adversaries.The panel dealt almost exclusively with the relationship between the United States and the Soviet Union but noted that there are ‘clear problems in scientific communication and national security involving Third World countries.’ Further study of this matter is necessary.

  12. Deathcore, creativity, and scientific thinking

    Science.gov (United States)

    Angeler, David G.; Sundstrom, Shana M.; Allen, Craig R.

    2016-01-01

    BackgroundMajor scientific breakthroughs are generally the result of materializing creative ideas, the result of an inductive process that sometimes spontaneously and unexpectedly generates a link between thoughts and/or objects that did not exist before. Creativity is the cornerstone of scientific thinking, but scientists in academia are judged by metrics of quantification that often leave little room for creative thinking. In many scientific fields, reductionist approaches are rewarded and new ideas viewed skeptically. As a result, scientific inquiry is often confined to narrow but safe disciplinary ivory towers, effectively preventing profoundly creative explorations that could yield unexpected benefits.New informationThis paper argues how apparently unrelated fields specifically music and belief systems can be combined in a provocative allegory to provide novel perspectives regarding patterns in nature, thereby potentially inspiring innovation in the natural, social and other sciences. The merger between basic human tensions such as those embodied by religion and music, for example the heavy metal genre of deathcore, may be perceived as controversial, challenging, and uncomfortable. However, it is an example of moving the thinking process out of unconsciously established comfort zones, through the connection of apparently unrelated entities. We argue that music, as an auditory art form, has the potential to enlighten and boost creative thinking in science. Metal, as a fast evolving and diversifying extreme form of musical art, may be particularly suitable to trigger surprising associations in scientific inquiry. This may pave the way for dealing with questions about what we don´t know that we don´t know in a fast-changing planet.

  13. GBF scientific progress report 1979

    International Nuclear Information System (INIS)

    1980-01-01

    The structure and style of representation of the paragraphs about scientific results are adjusted to the research and development program 1979. Since in this program an arrangement according to fields or departments resp. was chosen, the individual reports of this report on results were arranged as to departments too. In doing so, however, a survey of the aims and the development of the department as a whole precedes, and subsequently information on the results of the individual projects is given. In addition to the results of the year under report, the aims during the life of the project are summarized. Para. 2.1 puts the individual FE (research and development) projects into relation to the five research programs, which are at present dealt with by the GBF (Society for Biotechnological Research). The reports on the individual projects refer to the FE program number. For the first time, the report on the results contains a paragraph about the collecting activity and the research work of the DSM (German collection of microorganisms), which became part of the GBF at the beginning of the year under report. A separate paragraph deals with the scientific and technical infrastructure, especially with the work of the Service-Unit 'Biotechnikum' which produces natural substances, which are commercially not available. Paragraphs about further activities in the fields of scientific cooperation, results transfer etc, as well as about the staff and the economical developments of the GBF follow. (orig./AJ) [de

  14. Scientific knowledge and modern prospecting

    Science.gov (United States)

    Neuerburg, G.J.

    1985-01-01

    Modern prospecting is the systematic search for specified and generally ill-exposed components of the Earth's crust known as ore. This prospecting depends entirely on reliable, or scientific knowledge for guidance and for recognition of the search objects. Improvement in prospecting results from additions and refinements to scientific knowledge. Scientific knowledge is an ordered distillation of observations too numerous and too complex in themselves for easy understanding and for effective management. The ordering of these observations is accomplished by an evolutionary hierarchy of abstractions. These abstractions employ simplified descriptions consisting of characterization by selected properties, sampling to represent much larger parts of a phenomenon, generalized mappings of patterns of geometrical and numerical relations among properties, and explanation (theory) of these patterns as functional relations among the selected properties. Each abstraction is predicated on the mode of abstraction anticipated for the next higher level, so that research is a deductive process in which the highest level, theory, is indispensible for the growth and refinement of scientific knowledge, and therefore of prospecting methodology. ?? 1985 Springer-Verlag.

  15. Scientific results from the deepened Lopra-1 borehole, Faroe Islands: Mineralogical and thermodynamic constraints on Palaeogene palaeotemperature conditions during low-grade metamorphism of basaltic lavas recovered from the Lopra-1/1A deep hole, Faroe Islands

    Directory of Open Access Journals (Sweden)

    Glassley, William E.

    2006-07-01

    Full Text Available The sequene of secondary minerals that are reported for the Lopra-1/1A well records progressive zeolite facies to prehnite–pumpellyite-facies mineral progressions consistent with those of other wellstudied hydrothermally altered rock sequences. Detailed comparison of the calc–silicate (zeolites and prehnite mineral distributions of the Lopra-1/1A sequence with those from other regions indicates that this sequence exhibits consistently longer down-hole intervals for secondary mineral species than reported elsewhere. When compared to measured down-hole temperatures reported in other hydrothermally altered regions, the results suggest that the Lopra-1/1A mineral progression formed under conditions typical of low temperature hydrothermal systems that form shortly after eruption of thick basaltic piles. Maximum temperatures achieved at the 3500 m level of the well were at or below 200°C. The implied geothermal gradient was less than 50°C/km. An analysis of prehnite – fluid composition relationships was also conducted in order to determine if results compatible with the paragenetic sequence study could be obtained from thermodynamic constraints. In this case, thelimiting temperature for prehnite formation in equilibrium with albite–quartz–calcite–laumontite (the mineral assemblage at the bottom of the hole was determined for a range of fluid compositions.The resulting calculations suggest temperatures of formation of prehnite in the range of 140°C to 205°C, a conclusion which is broadly consistent with those reached from study of the parageneticrelationships. Comparison of these results with other studies of palaeogeothermal gradients of the North Atlantic margins suggests a consistent pattern in which relatively low geothermal gradientspersisted in the Palaeogene rift basin.

  16. Scientific collaboratories in higher education

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.; Li, Bin

    2003-01-01

    Scientific collaboratories hold the promise of providing students access to specialized scientific instruments, data and experts, enabling learning opportunities perhaps otherwise not available. However, evaluation of scientific collaboratories in higher education has lagged behind...

  17. Mapping the research on scientific collaboration

    Institute of Scientific and Technical Information of China (English)

    HOU Jianhua; CHEN Chaomei; YAN Jianxin

    2010-01-01

    The aim of this paper was to identify the trends and hot topics in the study of scientific collaboration via scientometric analysis.Information visualization and knowledge domain visualization techniques were adopted to determine how the study of scientific collaboration has evolved.A total of 1,455 articles on scientific cooperation published between 1993 and 2007 were retrieved from the SCI,SSCI and A&HCI databases with a topic search of scientific collaboration or scientific cooperation for the analysis.By using CiteSpace,the knowledge bases,research foci,and research fronts in the field of scientific collaboration were studied.The results indicated that research fronts and research foci are highly consistent in terms of the concept,origin,measurement,and theory of scientific collaboration.It also revealed that research fronts included scientific collaboration networks,international scientific collaboration,social network analysis and techniques,and applications of bibliometrical indicators,webmetrics,and health care related areas.

  18. Scientific progress at Yucca Mountain

    International Nuclear Information System (INIS)

    Gertz, C.P.

    1990-01-01

    The US Department of Energy (DOE) is moving forward with studies to determine whether Yucca Mountain, Nevada, would be a suitable site for the nation's first high-level radioactive waste repository; however, the DOE's Congressionally mandated task of characterizing the site has been severely delayed by a lack of cooperation from the state of Nevada. The state has refused to issue the appropriate permits that must be obtained before surface disturbing studies can proceed; therefore, an extensive surface-based drilling and trenching program and construction of underground exploration facilities are on hold until pending litigation between the DOE and Nevada has been resolved. Despite this major impasse, significant scientific progress has been made, and the DOE is aggressively pursuing investigations that can be conducted without the state-issued permits. Additionally, the DOE is developing a high-quality technical and management structure as well as equipment, plans, and quality assurance procedures, so that the scientific investigation program can proceed without delay once the appropriate permits are obtained

  19. Making better scientific figures

    Science.gov (United States)

    Hawkins, Ed; McNeall, Doug

    2016-04-01

    In the words of the UK government chief scientific adviser "Science is not finished until it's communicated" (Walport 2013). The tools to produce good visual communication have never been so easily accessible to scientists as at the present. Correspondingly, it has never been easier to produce and disseminate poor graphics. In this presentation, we highlight some good practice and offer some practical advice in preparing scientific figures for presentation to peers or to the public. We identify common mistakes in visualisation, including some made by the authors, and offer some good reasons not to trust defaults in graphics software. In particular, we discuss the use of colour scales and share our experiences in running a social media campaign (http://tiny.cc/endrainbow) to replace the "rainbow" (also "jet", or "spectral") colour scale as the default in (climate) scientific visualisation.

  20. Plagiarism in scientific publishing.

    Science.gov (United States)

    Masic, Izet

    2012-12-01

    Scientific publishing is the ultimate product of scientist work. Number of publications and their quoting are measures of scientist success while unpublished researches are invisible to the scientific community, and as such nonexistent. Researchers in their work rely on their predecessors, while the extent of use of one scientist work, as a source for the work of other authors is the verification of its contributions to the growth of human knowledge. If the author has published an article in a scientific journal it cannot publish the article in any other journal h with a few minor adjustments or without quoting parts of the first article, which are used in another article. Copyright infringement occurs when the author of a new article with or without the mentioning the author used substantial portions of previously published articles, including tables and figures. Scientific institutions and universities should,in accordance with the principles of Good Scientific Practice (GSP) and Good Laboratory Practices (GLP) have a center for monitoring,security, promotion and development of quality research. Establish rules and compliance to rules of good scientific practice are the obligations of each research institutions,universities and every individual-researchers,regardless of which area of science is investigated. In this way, internal quality control ensures that a research institution such as a university, assume responsibility for creating an environment that promotes standards of excellence, intellectual honesty and legality. Although the truth should be the aim of scientific research, it is not guiding fact for all scientists. The best way to reach the truth in its study and to avoid the methodological and ethical mistakes is to consistently apply scientific methods and ethical standards in research. Although variously defined plagiarism is basically intended to deceive the reader's own scientific contribution. There is no general regulation of control of

  1. PLAGIARISM IN SCIENTIFIC PUBLISHING

    Science.gov (United States)

    Masic, Izet

    2012-01-01

    Scientific publishing is the ultimate product of scientist work. Number of publications and their quoting are measures of scientist success while unpublished researches are invisible to the scientific community, and as such nonexistent. Researchers in their work rely on their predecessors, while the extent of use of one scientist work, as a source for the work of other authors is the verification of its contributions to the growth of human knowledge. If the author has published an article in a scientific journal it cannot publish the article in any other journal h with a few minor adjustments or without quoting parts of the first article, which are used in another article. Copyright infringement occurs when the author of a new article with or without the mentioning the author used substantial portions of previously published articles, including tables and figures. Scientific institutions and universities should,in accordance with the principles of Good Scientific Practice (GSP) and Good Laboratory Practices (GLP) have a center for monitoring,security, promotion and development of quality research. Establish rules and compliance to rules of good scientific practice are the obligations of each research institutions,universities and every individual-researchers,regardless of which area of science is investigated. In this way, internal quality control ensures that a research institution such as a university, assume responsibility for creating an environment that promotes standards of excellence, intellectual honesty and legality. Although the truth should be the aim of scientific research, it is not guiding fact for all scientists. The best way to reach the truth in its study and to avoid the methodological and ethical mistakes is to consistently apply scientific methods and ethical standards in research. Although variously defined plagiarism is basically intended to deceive the reader’s own scientific contribution. There is no general regulation of control of

  2. NASA's Scientific Visualization Studio

    Science.gov (United States)

    Mitchell, Horace G.

    2003-01-01

    Since 1988, the Scientific Visualization Studio(SVS) at NASA Goddard Space Flight Center has produced scientific visualizations of NASA s scientific research and remote sensing data for public outreach. These visualizations take the form of images, animations, and end-to-end systems and have been used in many venues: from the network news to science programs such as NOVA, from museum exhibits at the Smithsonian to White House briefings. This presentation will give an overview of the major activities and accomplishments of the SVS, and some of the most interesting projects and systems developed at the SVS will be described. Particular emphasis will be given to the practices and procedures by which the SVS creates visualizations, from the hardware and software used to the structures and collaborations by which products are designed, developed, and delivered to customers. The web-based archival and delivery system for SVS visualizations at svs.gsfc.nasa.gov will also be described.

  3. How to write scientific paper

    International Nuclear Information System (INIS)

    Kim, Si Jung

    1977-03-01

    This book introduces the essence of scientific paper, contents of paper, writing of manuscript, as well as research and analysis and arrangement of reference. It shows conditions of paper, kinds of paper, division and arrangement of content, title, author name, table of contents, abstracts, introduction, experimental materials and methods, results, consideration, conclusion, summary, acknowledgements, references. It also covers draft, quotation, footnotes and references, graphs and pictures, importance of literature research, how to find special literature, and analysis and arrangement of literature.

  4. EFFECT SCIENTIFIC INQUIRY TEACHING MODELS AND SCIENTIFIC ATTITUDE TO PHYSICS STUDENT OUTCOMES

    Directory of Open Access Journals (Sweden)

    Dian Clara Natalia Sihotang

    2014-12-01

    Full Text Available The objectives of this study were to determine whether: (1 the student’s achievement taught by using Scientific Inquiry Teaching Models is better than that of taught by using Direct Instruction; (2 the student’s achievement who have a high scientific attitude is better than student who have low scientific attitude; and (3 there is interaction between Scientific Inquiry Teaching Models and scientific attitude for the student’s achievement. The results of research are: (1 the student’s achievement given learning through Scientific Inquiry Teaching Models better than Direct Instruction; (2 the student’s achievement who have a high scientific attitude better than student who have low scientific attitude; and (3 there was interaction between Scientific Inquiry Teaching Models and scientific attitude for student’s achievement which this models is better to apply for student who have a high scientific attitude.

  5. Recording Scientific Knowledge

    International Nuclear Information System (INIS)

    Bowker, Geof

    2006-01-01

    The way we record knowledge, and the web of technical, formal, and social practices that surrounds it, inevitably affects the knowledge that we record. The ways we hold knowledge about the past - in handwritten manuscripts, in printed books, in file folders, in databases - shape the kind of stories we tell about that past. In this talk, I look at how over the past two hundred years, information technology has affected the nature and production of scientific knowledge. Further, I explore ways in which the emergent new cyberinfrastructure is changing our relationship to scientific practice.

  6. Usability in Scientific Databases

    Directory of Open Access Journals (Sweden)

    Ana-Maria Suduc

    2012-07-01

    Full Text Available Usability, most often defined as the ease of use and acceptability of a system, affects the users' performance and their job satisfaction when working with a machine. Therefore, usability is a very important aspect which must be considered in the process of a system development. The paper presents several numerical data related to the history of the scientific research of the usability of information systems, as it is viewed in the information provided by three important scientific databases, Science Direct, ACM Digital Library and IEEE Xplore Digital Library, at different queries related to this field.

  7. Latest results from JET

    International Nuclear Information System (INIS)

    Bickerton, R.J.

    1989-01-01

    The Joint European Torus (JET) is a large tokamak designed with the essential objective of obtaining and studying plasmas with parameters close to those envisaged for an eventual power-generating, nuclear-fusion reactor. JET is situated on a site near Abingdon, Oxon, UK. JET is the largest single project of the nuclear fusion research programme of the European Atomic Energy Community (EURATOM). The tokamak started operation in mid 1983 after a five year construction period. The scientific and technical results achieved so far are summarised in this article. (orig.)

  8. Luminous Phenomena - A Scientific Investigation of Anomalous Luminous Atmospheric Phenomena

    Science.gov (United States)

    Teodorani, M.

    2003-12-01

    Anomalous atmospheric luminous phenomena reoccur in several locations of Earth, in the form of multi-color light balls characterized by large dimensions, erratic motion, long duration and a correlated electromagnetic field. The author (an astrophysicist) of this book, which is organized as a selection of some of his technical and popularizing papers and seminars, describes and discusses all the efforts that have been done in 10 years, through several missions and a massive data analysis, in order to obtain some scientific explanation of this kind of anomalies, in particular the Hessdalen anomaly in Norway. The following topics are treated in the book: a) geographic archive of the areas of Earth where such phenomena are known to reoccur most often; b) observational techniques of astrophysical kind that have been used to acquire the data; c) main scientific results obtained so far; d) physical interpretation and natural hypothesis vs. ETV hypothesis; e) historical and chronological issues; f) the importance to brindle new energy sources; g) the importance to keep distance from any kind of "ufology". An unpublished chapter is entirely devoted to a detailed scientific investigation project of light phenomena reoccurring on the Ontario lake; the chosen new-generation multi-wavelength sensing instrumentation that is planned to be used in future missions in that specific area, is described together with scientific rationale and planned procedures. The main results, which were obtained in other areas of the world, such as the Arizona desert, USA and the Sibillini Mountains, Italy, are also briefly mentioned. One chapter is entirely dedicated to the presentation of extensive abstracts of technical papers by the author concerning this specific subject. The book is accompanied with a rich source of bibliographic references.

  9. Chernobyl'-88. Reports of the 1. All-Union scientific and technical meeting on results of accident effect elimination at the Chernobyl' NPP. V. 7. Part 1. Localization of accident consequences at the 4th power unit, operating site of the Chernobyl NPP and adjoining territories

    International Nuclear Information System (INIS)

    Ignatenko, E.I.

    1989-01-01

    The next data on the accident consequence elimination are presented: temperature monitoring results, gamma radiation exposure dose rates, neutron and gamma fields, aerosol disperse composition. The information system for scientific researches FINISH and automatic subsystems for radiation control and the Ukrytie object diagnostics are described. Decontamination of the Chernobyl' NPP territory, equipment and rooms is described too

  10. Chernobyl'-88. Reports of the 1. All-Union scientific and technical meeting on results of accident effect elimination at the Chernobyl' NPP. V. 7. Part 2. Localization of accident consequences at the 4th power unit, operating site of the Chernobyl' NPP and adjoining territories

    International Nuclear Information System (INIS)

    Ignatenko, E.I.

    1989-01-01

    The next data on the accident consequence elimination are presented: temperature monitoring results, gamma radiation exposure dose rates, neutron and gamma fields, aerosol disperse composition. The information system for scientific researches FINISH and automatic subsystems for radiation control and the Ukrytie object diagnostics are described. Decontamination of the Chernobyl' NPP territory, equipment and rooms is described too

  11. Scientific annual report 1972

    International Nuclear Information System (INIS)

    This is a report on scientific research at DESY in 1972. The activities in the field of electron-nucleon scattering, photoproduction and synchrotron radiation get a special mention. It is also reported on the work on the double storage ring as well as on the extension to the synchrotron. (WL/LN) [de

  12. Funding scientific open access

    International Nuclear Information System (INIS)

    Canessa, E.; Fonda, C.; Zennaro, M.

    2006-11-01

    In order to reduce the knowledge divide, more Open Access Journals (OAJ) are needed in all languages and scholarly subject areas that exercise peer-review or editorial quality control. To finance needed costs, it is discussed why and how to sell target specific advertisement by associating ads to given scientific keywords. (author)

  13. Scientific Report 2007

    International Nuclear Information System (INIS)

    2009-09-01

    This annual scientific report gives an concise overview of research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2007. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research

  14. Scientific Report 2001

    International Nuclear Information System (INIS)

    2002-04-01

    The annual scientific report gives an overview of the R and D activities at the Belgian Nuclear Research Centre SCK-CEN in 2001. The report discusses progress and main achievements in four principal areas: Radiation Protection, Radioactive Waste and Clean-up, Reactor Safety and the BR2 Reactor

  15. Scientific Report 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-04-15

    The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2005. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research.

  16. Dorky Poll Scientific Fears

    CERN Multimedia

    2008-01-01

    The questions posed in yesterday's posts about hopes for 2008 were half of what we were asked by the Powers That Be. The other half: What scientific development do you fear you'll be blogging or reading about in 2008?

  17. Scientific Report 2004

    International Nuclear Information System (INIS)

    2005-04-01

    The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2004. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research

  18. Scientific Report 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-04-01

    The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2004. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research.

  19. Is risk analysis scientific?

    Science.gov (United States)

    Hansson, Sven Ove; Aven, Terje

    2014-07-01

    This article discusses to what extent risk analysis is scientific in view of a set of commonly used definitions and criteria. We consider scientific knowledge to be characterized by its subject matter, its success in developing the best available knowledge in its fields of study, and the epistemic norms and values that guide scientific investigations. We proceed to assess the field of risk analysis according to these criteria. For this purpose, we use a model for risk analysis in which science is used as a base for decision making on risks, which covers the five elements evidence, knowledge base, broad risk evaluation, managerial review and judgment, and the decision; and that relates these elements to the domains experts and decisionmakers, and to the domains fact-based or value-based. We conclude that risk analysis is a scientific field of study, when understood as consisting primarily of (i) knowledge about risk-related phenomena, processes, events, etc., and (ii) concepts, theories, frameworks, approaches, principles, methods and models to understand, assess, characterize, communicate, and manage risk, in general and for specific applications (the instrumental part). © 2014 Society for Risk Analysis.

  20. Scientific Medical Journal

    African Journals Online (AJOL)

    Scientific Medical Journal: an official journal of Egyptian Medical Education provides a forum for dissemination of knowledge, exchange of ideas, inform of exchange of ideas, information and experience among workers, investigators and clinicians in all disciplines of medicine with emphasis on its treatment and prevention.

  1. Scientific Report 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-04-01

    The annual scientific report gives an overview of the R and D activities at the Belgian Nuclear Research Centre SCK-CEN in 2001. The report discusses progress and main achievements in four principal areas: Radiation Protection, Radioactive Waste and Clean-up, Reactor Safety and the BR2 Reactor.

  2. Assessing Scientific Performance.

    Science.gov (United States)

    Weiner, John M.; And Others

    1984-01-01

    A method for assessing scientific performance based on relationships displayed numerically in published documents is proposed and illustrated using published documents in pediatric oncology for the period 1979-1982. Contributions of a major clinical investigations group, the Childrens Cancer Study Group, are analyzed. Twenty-nine references are…

  3. Scientific Report 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-09-15

    The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2006. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research.

  4. Scientific Report 2006

    International Nuclear Information System (INIS)

    2007-09-01

    The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2006. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research

  5. Scientific Report 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-01-01

    The annual scientific report gives an overview of the R and D activities at the Belgian Nuclear Research Centre SCK-CEN in 2003. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge, and fusion research.

  6. 3 CFR - Scientific Integrity

    Science.gov (United States)

    2010-01-01

    ... information in policymaking. The selection of scientists and technology professionals for positions in the... Administration on a wide range of issues, including improvement of public health, protection of the environment... technological findings and conclusions. If scientific and technological information is developed and used by the...

  7. Scientific annual report 1973

    International Nuclear Information System (INIS)

    A report is given on the scientific research at DESY in 1973, which included the first storage of electrons in the double storage ring DORIS. Also mentioned are the two large spectrometers PLUTO and DASP, and experiments relating to elementary particles, synchrotron radiation, and the improvement of the equipment are described. (WL/AK) [de

  8. Scientific Report 2005

    International Nuclear Information System (INIS)

    2006-04-01

    The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2005. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research

  9. Scientific Report 2003

    International Nuclear Information System (INIS)

    2004-01-01

    The annual scientific report gives an overview of the R and D activities at the Belgian Nuclear Research Centre SCK-CEN in 2003. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge, and fusion research

  10. Mario Bunge's Scientific Realism

    Science.gov (United States)

    Cordero, Alberto

    2012-01-01

    This paper presents and comments on Mario Bunge's scientific realism. After a brief introduction in Sects. 1 and 2 outlines Bunge's conception of realism. Focusing on the case of quantum mechanics, Sect. 3 explores how his approach plays out for problematic theories. Section 4 comments on Bunge's project against the background of the current…

  11. 1995 Scientific Report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    This annual scientific report of SCK-CEN presents a comprehensive coverage and research activities in the filed of (a) waste and site restoration (b) reactor safety and radiation protection (c) operation of BR2 Materials Testing Reactor and (d) services provided by the center (analysis for characterization of waste packages, nuclear measurements, low-level radioactivity measurements).

  12. Toward executable scientific publications

    NARCIS (Netherlands)

    Strijkers, R.J.; Cushing, R.; Vasyunin, D.; Laat, C. de; Belloum, A.S.Z.; Meijer, R.J.

    2011-01-01

    Reproducibility of experiments is considered as one of the main principles of the scientific method. Recent developments in data and computation intensive science, i.e. e-Science, and state of the art in Cloud computing provide the necessary components to preserve data sets and re-run code and

  13. 2003 Scientific Technological Report

    International Nuclear Information System (INIS)

    Prado Cuba, A.; Gayoso Caballero, C.; Robles Nique, A.; Olivera Lescano, P.

    2004-08-01

    This annual scientific-technological report provides an overview of research and development activities at Peruvian Institute of Nuclear Energy (IPEN) during the period from 1 january to 31 december, 2003. This report includes 54 papers divided in 9 subject matters: physics and nuclear chemistry, nuclear engineering, materials science, radiochemistry, industrial applications, medical applications, environmental applications, protection and radiological safety, and management aspects

  14. Popularization of science and scientific journalism: possibilities of scientific literacy

    Directory of Open Access Journals (Sweden)

    Alessandro Augusto Barros Façanha

    2017-07-01

    Full Text Available This study evidences the intersection between science education and communication in the perspective of the popularization of sciences based on the evidence produced in a specific column of a large circulation newspaper of the city of Teresina / PI. The discussions were based on the analysis of content carried out in the context of science classes in a school of basic education with elementary students, where journalistic texts were used with diverse themes that involved science and daily life in order to understand the interpretation of texts And the relationship with the context of scientific dissemination and citizenship. The analysis of the content was used and the answers were stratified into categories of conceptual nature and application of the themes. The analyses show that the texts of scientific dissemination have a contribution in relation to the popularization of Sciences, fomentation to the debate in the classroom, didactic increment in the classes of sciences, in spite of their insertion still incipient in the context of science education. However, the results of the research denote the difficulty faced by the students in understanding the text of dissemination in their conceptual comprehension and resolution of daily problems, as well as the distance between the context of the sciences in their theoretical scope and their presentation in everyday situations, Despite this, the texts of divulgation corroborated as an important way of real insertion in the process of scientific literacy and promotion of citizenship.

  15. Health consequences of the Chernobyl accident. Results of the IPHECA pilot projects and related national programmes. Scientific report. International Programme on the Health Effects of the Chernobyl Accident (IPHECA)

    International Nuclear Information System (INIS)

    1996-01-01

    Since the Chernobyl accident, massive efforts have been made by the governmental authorities to mitigate the effects, to provide diagnosis, treatment and rehabilitation to those affected and to investigate the effects on health which had occurred. Vast amounts of resources have and continue to be expended in supporting these efforts. In 1991, WHO officially joined this effort through the establishment by the World Health Assembly of the International Programme on the Health Effects of the Chernobyl Accident (IPHECA). The objectives of this Programme were: to contribute to the efforts to alleviate the health consequences of the accident by assisting health authorities in Belarus, Russian Federation and Ukraine; to consolidate the experience gained from treatment of over-exposure and from various practical interventions and thereby improve medical preparedness for the future; and to acquire data in the fields of radiation epidemiology and medical response to disasters. IPHECA initially concentrated on five priority areas, and pilot projects were developed for implementation in Belarus, Russian Federation and Ukraine for each: thyroid, haematology, brain damage in-utero, epidemiological registry and oral health (only in Belarus). This publication is intended to fulfil a number of purposes. It provides an account of what was accomplished during the pilot phase of IPHECA. It discusses the protocols which were developed and used, summarizes the investigations which were carried out and reports on the instrumentation, supplies and training programmes which were provided. The publication also describes and discusses the results which have been obtained to date and identifies the still existing gaps in knowledge

  16. Health consequences of the Chernobyl accident. Results of the IPHECA pilot projects and related national programmes. Scientific report. International Programme on the Health Effects of the Chernobyl Accident (IPHECA)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    Since the Chernobyl accident, massive efforts have been made by the governmental authorities to mitigate the effects, to provide diagnosis, treatment and rehabilitation to those affected and to investigate the effects on health which had occurred. Vast amounts of resources have and continue to be expended in supporting these efforts. In 1991, WHO officially joined this effort through the establishment by the World Health Assembly of the International Programme on the Health Effects of the Chernobyl Accident (IPHECA). The objectives of this Programme were: to contribute to the efforts to alleviate the health consequences of the accident by assisting health authorities in Belarus, Russian Federation and Ukraine; to consolidate the experience gained from treatment of over-exposure and from various practical interventions and thereby improve medical preparedness for the future; and to acquire data in the fields of radiation epidemiology and medical response to disasters. IPHECA initially concentrated on five priority areas, and pilot projects were developed for implementation in Belarus, Russian Federation and Ukraine for each: thyroid, haematology, brain damage in-utero, epidemiological registry and oral health (only in Belarus). This publication is intended to fulfil a number of purposes. It provides an account of what was accomplished during the pilot phase of IPHECA. It discusses the protocols which were developed and used, summarizes the investigations which were carried out and reports on the instrumentation, supplies and training programmes which were provided. The publication also describes and discusses the results which have been obtained to date and identifies the still existing gaps in knowledge Refs, figs, tabs

  17. 48 CFR 1852.235-73 - Final Scientific and Technical Reports.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Final Scientific and Technical Reports. 1852.235-73 Section 1852.235-73 Federal Acquisition Regulations System NATIONAL..., including recommendations and conclusions based on the experience and results obtained. The final report...

  18. Truncated States Obtained by Iteration

    International Nuclear Information System (INIS)

    Cardoso, W. B.; Almeida, N. G. de

    2008-01-01

    We introduce the concept of truncated states obtained via iterative processes (TSI) and study its statistical features, making an analogy with dynamical systems theory (DST). As a specific example, we have studied TSI for the doubling and the logistic functions, which are standard functions in studying chaos. TSI for both the doubling and logistic functions exhibit certain similar patterns when their statistical features are compared from the point of view of DST

  19. Turning Scientific Presentations into Stories

    Science.gov (United States)

    Aruffo, Christopher

    2015-01-01

    To increase students' confidence in giving scientific presentations, students were shown how to present scientific findings as a narrative story. Students who were preparing to give a scientific talk attended a workshop in which they were encouraged to experience the similarities between telling a personal anecdote and presenting scientific data.…

  20. ON THE APPROACH TO SCIENTIFIC PUBLICATIONS VISIBILITY MAXIMIZATION BY THE SCIENTIFIC SOCIAL NETWORKS USAGE

    Directory of Open Access Journals (Sweden)

    A. V. Semenets

    2015-12-01

    3 Research results. Data integration of the user profiles of the scientific social networksThe maximization of visibility and bibliometrics citation increasing of the scientific papers initiated by the given above approach is discussed. The detailed strategy of the user profiles bibliometrics data integration through the scientific social networks is proposed. The role and ways to receiving of the Altmetric rating indices are mentioned.