The Validity of Subjects in Korean Dental Technicians' Licensing Examination

Directory of Open Access Journals (Sweden)

Woong-chul Kim

2005-06-01

Full Text Available This study prepared a basic framework for the development and improvement of Korean Dental Technicians' Licensing Examination, based on actual test questions. A peer review was conducted to ensure relevance to current practices in dental technology. For the statistical analysis, 1000 dental laboratory technicians were selected; specialists in dental laboratory technology (laboratory owners, educators, etc. were involved in creating valid and reliable questions. Results indicated that examination subjects should be divided into three categories: basic dental laboratory theory, dental laboratory specialties, and a practical examination. To ensure relevance to current practice, there should be less emphasis on basic dental laboratory theory, including health-related laws, and more emphasis on dental laboratory specialties. Introduction to dental anatomy should be separated from oral anatomy and tooth morphology; and fixed prosthodontics should be separated from crown and bridge technology and dental ceramics technology. Removable orthodontic appliance technology should be renamed 'orthodontic laboratory technology'. There should be less questions related to health related law, oral anatomy, dental hygiene, dental materials science and inlay, while the distribution ratio of questions related to tooth morphology should be maintained. There should be a decrease in the distribution ratio of questions related to crown and bridge technology, dental ceramics technology, complete dentures and removable partial dentures technology, and orthodontic laboratory technology. In the practical examination, the current multiple choice test should be replaced with tooth carving using wax or plaster. In dental laboratory specialties, subjects related to contemporary dental laboratory technology should be included in the test items.

Significance of Dental Records in Personal Identification in Forensic Sciences

Directory of Open Access Journals (Sweden)

Vagish Kumar L Shanbhag

2016-01-01

Full Text Available Forensic odontology is a branch that connects dentistry and the legal profession. One of the members in the forensic investigation team is a dentist. Dentists play an important and significant role in various aspects of the identification of persons in various forensic circumstances. However, several dentists and legal professionals are quite ignorant of this fascinating aspect of forensic odontology. A need was felt to fill this gap. The dental record is a legal document possessed by the dentist and it contains subjective and objective information about the patient. A PubMed search and Google search were done for articles highlighting the importance of dental records in forensic sciences using the key words "forensic odontology, forensic dentistry, forensic dentists, identification, dental records, and dental chart". A total of 42 articles relevant to the title of the article were found and reviewed. The present article highlights the role of dentists in forensic sciences, their possible contributions to forensics, and the various aspects of forensic dentistry, thus bridging the gap of knowledge between the legal and the dental fraternities.

Collaboration spotting for dental science.

Science.gov (United States)

Leonardi, E; Agocs, A; Fragkiskos, S; Kasfikis, N; Le Goff, J M; Cristalli, M P; Luzzi, V; Polimeni, A

2014-10-06

The goal of the Collaboration Spotting project is to create an automatic system to collect information about publications and patents related to a given technology, to identify the key players involved, and to highlight collaborations and related technologies. The collected information can be visualized in a web browser as interactive graphical maps showing in an intuitive way the players and their collaborations (Sociogram) and the relations among the technologies (Technogram). We propose to use the system to study technologies related to Dental Science. In order to create a Sociogram, we create a logical filter based on a set of keywords related to the technology under study. This filter is used to extract a list of publications from the Web of Science™ database. The list is validated by an expert in the technology and sent to CERN where it is inserted in the Collaboration Spotting database. Here, an automatic software system uses the data to generate the final maps. We studied a set of recent technologies related to bone regeneration procedures of oro--maxillo--facial critical size defects, namely the use of Porous HydroxyApatite (HA) as a bone substitute alone (bone graft) or as a tridimensional support (scaffold) for insemination and differentiation ex--vivo of Mesenchymal Stem Cells. We produced the Sociograms for these technologies and the resulting maps are now accessible on--line. The Collaboration Spotting system allows the automatic creation of interactive maps to show the current and historical state of research on a specific technology. These maps are an ideal tool both for researchers who want to assess the state--of--the--art in a given technology, and for research organizations who want to evaluate their contribution to the technological development in a given field. We demonstrated that the system can be used for Dental Science and produced the maps for an initial set of technologies in this field. We now plan to enlarge the set of mapped

Integration of basic sciences and clinical sciences in oral radiology education for dental students.

Science.gov (United States)

Baghdady, Mariam T; Carnahan, Heather; Lam, Ernest W N; Woods, Nicole N

2013-06-01

Educational research suggests that cognitive processing in diagnostic radiology requires a solid foundation in the basic sciences and knowledge of the radiological changes associated with disease. Although it is generally assumed that dental students must acquire both sets of knowledge, little is known about the most effective way to teach them. Currently, the basic and clinical sciences are taught separately. This study was conducted to compare the diagnostic accuracy of students when taught basic sciences segregated or integrated with clinical features. Predoctoral dental students (n=51) were taught four confusable intrabony abnormalities using basic science descriptions integrated with the radiographic features or taught segregated from the radiographic features. The students were tested with diagnostic images, and memory tests were performed immediately after learning and one week later. On immediate and delayed testing, participants in the integrated basic science group outperformed those from the segregated group. A main effect of learning condition was found to be significant (pbasic sciences integrated with clinical features produces higher diagnostic accuracy in novices than teaching basic sciences segregated from clinical features.

Physical Sciences Laboratory (PSL)

Data.gov (United States)

Federal Laboratory Consortium — PNNL's Physical Sciences Laboratory (PSL) houses 22 research laboratories for conducting a wide-range of research including catalyst formulation, chemical analysis,...

Journal of Medical Laboratory Science

African Journals Online (AJOL)

The Journal of Medical Laboratory Science is a Quarterly Publication of the Association of Medical Laboratory Scientists of Nigeria. It Publishes Original Research and Review Articles in All Fields of Biomedical Sciences and Laboratory Medicine, Covering Medical Microbiology, Medical Parasitology, Clinical Chemistry, ...

Tunison Laboratory of Aquatic Science

Data.gov (United States)

Federal Laboratory Consortium — Tunison Laboratory of Aquatic Science (TLAS), located in Cortland, New York, is a field station of the USGS Great Lakes Science Center (GLSC). TLAS was established...

Students' Psychosocial Perception of Science Laboratory ...

African Journals Online (AJOL)

Data was obtained with the Science Laboratory Environment Questionnaire, administered on 338 third year science students. Four factors were found to influence students' perception of their science laboratory environment. Two distinct material environments emerged, which have not been reported in the literature.

How neuroscience is taught to North American dental students: results of the Basic Science Survey Series.

Science.gov (United States)

Gould, Douglas J; Clarkson, Mackenzie J; Hutchins, Bob; Lambert, H Wayne

2014-03-01

The purpose of this study was to determine how North American dental students are taught neuroscience during their preclinical dental education. This survey represents one part of a larger research project, the Basic Science Survey Series for Dentistry, which covers all of the biomedical science coursework required of preclinical students in North American dental schools. Members of the Section on Anatomical Sciences of the American Dental Education Association assembled, distributed, and analyzed the neuroscience survey, which had a 98.5 percent response from course directors of the sixty-seven North American dental schools. The eighteen-item instrument collected demographic data on the course directors, information on the content in each course, and information on how neuroscience content is presented. Findings indicate that 1) most neuroscience instruction is conducted by non-dental school faculty members; 2) large content variability exists between programs; and 3) an increase in didactic instruction, integrated curricula, and use of computer-aided instruction is occurring. It is anticipated that the information derived from the survey will help guide neuroscience curricula in dental schools and aid in identifying appropriate content.

Science | Argonne National Laboratory

Science.gov (United States)

Security Photon Sciences Physical Sciences & Engineering Energy Frontier Research Centers Scientific Publications Researchers Postdocs Exascale Computing Institute for Molecular Engineering at Argonne Work with Us About Safety News Careers Education Community Diversity Directory Argonne National Laboratory

Behavioral Sciences in Dental Education: Past, Present, and Future.

Science.gov (United States)

Dworkin, Samuel F.

1981-01-01

A historical perspective and a description of the current status of behavioral sciences in dental education are provided. One organizational approach for developing goals and objectives is suggested. Holistic health is seen as the broadest application of behavioral medicine. (MLW)

Emotional intelligence in medical laboratory science

Science.gov (United States)

Price, Travis

The purpose of this study was to explore the role of emotional intelligence (EI) in medical laboratory science, as perceived by laboratory administrators. To collect and evaluate these perceptions, a survey was developed and distributed to over 1,400 medical laboratory administrators throughout the U.S. during January and February of 2013. In addition to demographic-based questions, the survey contained a list of 16 items, three skills traditionally considered important for successful work in the medical laboratory as well as 13 EI-related items. Laboratory administrators were asked to rate each item for its importance for job performance, their satisfaction with the item's demonstration among currently working medical laboratory scientists (MLS) and the amount of responsibility college-based medical laboratory science programs should assume for the development of each skill or attribute. Participants were also asked about EI training in their laboratories and were given the opportunity to express any thoughts or opinions about EI as it related to medical laboratory science. This study revealed that each EI item, as well as each of the three other items, was considered to be very or extremely important for successful job performance. Administrators conveyed that they were satisfied overall, but indicated room for improvement in all areas, especially those related to EI. Those surveyed emphasized that medical laboratory science programs should continue to carry the bulk of the responsibility for the development of technical skills and theoretical knowledge and expressed support for increased attention to EI concepts at the individual, laboratory, and program levels.

Snack foods and dental caries. Investigations using laboratory animals.

Science.gov (United States)

Grenby, T H

1990-05-05

The nation's eating habits are undergoing major transformation, with a swing away from traditional meals to a huge increase in snack consumption, but very little is known of the nutritional and dental implications of this change. The research project reported here evaluated a range of snack foods in caries-active laboratory animals, comparing them, as dietary ingredients, with noncariogenic and cariogenic (sugar) diets. The findings showed the very low cariogenicity of salted peanuts, followed by ready-salted and salt and vinegar crisps, extruded maize, mixed-starch and prefabricated/fried potato products, and cheese-filled puffs. Other varieties of crisps (cheese and onion and special shapes) proved to be more cariogenic, not far short of semi-sweet biscuits in some cases. It is concluded that the severity of the processing undergone by the snack foods and the nature of the flavouring agents with which they are coated can influence their dental properties.

Laboratory Animal Sciences Program (LASP)

Data.gov (United States)

Federal Laboratory Consortium — The Laboratory Animal Sciences Program (LASP) is a comprehensive resource for scientists performing animal-based research to gain a better understanding of cancer,...

Los Alamos National Laboratory A National Science Laboratory

Energy Technology Data Exchange (ETDEWEB)

Chadwick, Mark B. [Los Alamos National Laboratory

2012-07-20

Our mission as a DOE national security science laboratory is to develop and apply science, technology, and engineering solutions that: (1) Ensure the safety, security, and reliability of the US nuclear deterrent; (2) Protect against the nuclear threat; and (3) Solve Energy Security and other emerging national security challenges.

The Marine Sciences Laboratory (MSL)

Data.gov (United States)

Federal Laboratory Consortium — The�Marine Sciences Laboratory sits on 140 acres of tidelands and uplands located on Sequim Bay, Washington. Key capabilities include 6,000 sq ft of analytical and...

Egyptian Journal of Medical Laboratory Sciences

African Journals Online (AJOL)

The main objective of this journal is to cover all aspects of medical laboratory science. Contributions are received from staff members of academic, basic and laboratory science departments of the different medical schools and research centres all over Egypt and it fulfils a real need amongst Egyptian doctors working in the ...

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

College of Medicine and Dentistry, James Cook University, Cairns 4878, Australia; Key Laboratory of Applied Chemistry and Nanotechnology at Universities of Jilin Province, Changchun University of Science and Technology, Changchun 130022, China; Institute of Dental Materials, Wenzhou Medical University, Wenzhou ...

Life sciences: Lawrence Berkeley Laboratory, 1988

International Nuclear Information System (INIS)

1989-07-01

Life Sciences Research at LBL has both a long history and a new visibility. The physics technologies pioneered in the days of Ernest O. Lawrence found almost immediate application in the medical research conducted by Ernest's brother, John Lawrence. And the tradition of nuclear medicine continues today, largely uninterrupted for more than 50 years. Until recently, though, life sciences research has been a secondary force at the Lawrence Berkeley Laboratory (LBL). Today, a true multi-program laboratory has emerged, in which the life sciences participate as a full partner. The LBL Human Genome Center is a contribution to the growing international effort to map the human genome. Its achievements represent LBL divisions, including Engineering, Materials and Chemical Sciences, and Information and Computing Sciences, along with Cell and Molecular Biology and Chemical Biodynamics. The Advanced Light Source Life Sciences Center will comprise not only beamlines and experimental end stations, but also supporting laboratories and office space for scientists from across the US. This effort reflects a confluence of scientific disciplines --- this time represented by individuals from the life sciences divisions and by engineers and physicists associated with the Advanced Light Source project. And finally, this report itself, the first summarizing the efforts of all four life sciences divisions, suggests a new spirit of cooperation. 30 figs

Perceived barriers in accessing dental care among patients attending dental institute using decision-making trial and evaluation laboratory method

Directory of Open Access Journals (Sweden)

Ravneet Malhi

2015-01-01

Full Text Available Introduction: Utilization of dental service is a concept of expressing the extent of interaction between the service provider and the people for whom it is indented. However, one of the major issues in social welfare is the equitable provision of these services to the population. Aim: To determine the perceived barriers affecting access to the dental services in the dental institute. Materials and Methods: A cross-sectional survey was conducted in the dental institute during the month of February in the year 2014 using decision-making trial and evaluation laboratory (DEMATEL method. The study sample included the 364 subjects. The required data were collected using a specially designed and pretested questionnaire. The data were analyzed using SPSS 18.0 (SPSS Inc., Chicago, IL, USA and MATLAB 7.6.0. The mean, standard deviations were used to describe the data, and inferential statistics included one-way ANOVA and DEMATEL. Results: The five determinants of cost, inconvenience, fear, organization, and patient-dentist relationship were determined as barriers to access dental services. Based on subjects′ responses to the questions, the cost (54.75% agreed or strongly agreed was identified as the most important factor affecting the access to dental health care followed by dentist-patient relationship (48.57%, inconvenience (36.55%, fear (23.70%, and organization (14.02%. The difference was found to be statistically significant (P = 0.0001. When the hierarchy of the affecting and affected factors was calculated, based on the factor analysis by using DEMATEL method, the cost (R−J = 0.16 and organization (R−J = 1.15, were certain affecting determinant which influenced the access to dental services and inconvenience. Conclusion: The major barriers to oral health care utilization among our patients were cost, fear, and organization. Policymakers, administrators, and insurance organizations have a major role. Hence, the policies should be fair and

Quality Evaluation of Zirconium Dioxide Frameworks Produced in Five Dental Laboratories from Different Countries.

Science.gov (United States)

Schneebeli, Esther; Brägger, Urs; Scherrer, Susanne S; Keller, Andrea; Wittneben, Julia G; Hicklin, Stefan P

2017-07-01

The aim of this study was to assess and compare quality as well as economic aspects of CAD/CAM high strength ceramic three-unit FDP frameworks ordered from dental laboratories located in emerging countries and Switzerland. The master casts of six cases were sent to five dental laboratories located in Thailand (Bangkok), China (Peking and Shenzhen), Turkey (Izmir), and Switzerland (Bern). Each laboratory was using a different CAD/CAM system. The clinical fit of the frameworks was qualitatively assessed, and the thickness of the framework material, the connector height, the width, and the diameter were evaluated using a measuring sensor. The analysis of the internal fit of the frameworks was performed by means of a replica technique, whereas the inner and outer surfaces of the frameworks were evaluated for traces of postprocessing and damage to the intaglio surface with light and electronic microscopes. Groups (dental laboratories and cases) were compared for statistically significant differences using Mann-Whitney U-tests after Bonferroni correction. An acceptable clinical fit was found at 97.9% of the margins produced in laboratory E, 87.5% in B, 93.7% in C, 79.2% in A, and 62.5% in D. The mean framework thicknesses were not statistically significantly different for the premolar regions; however, for the molar area 4/8 of the evaluated sites were statistically significantly different. Circumference, surface, and width of the connectors produced in the different laboratories were statistically significantly different but not the height. There were great differences in the designs for the pontic and connector regions, and some of the frameworks would not be recommended for clinical use. Traces of heavy postprocessing were found in frameworks from some of the laboratories. The prices per framework ranged from US$177 to US$896. By ordering laboratory work in developing countries, a considerable price reduction was obtained compared to the price level in Switzerland

Life sciences: Lawrence Berkeley Laboratory, 1988

Energy Technology Data Exchange (ETDEWEB)

1989-07-01

Life Sciences Research at LBL has both a long history and a new visibility. The physics technologies pioneered in the days of Ernest O. Lawrence found almost immediate application in the medical research conducted by Ernest's brother, John Lawrence. And the tradition of nuclear medicine continues today, largely uninterrupted for more than 50 years. Until recently, though, life sciences research has been a secondary force at the Lawrence Berkeley Laboratory (LBL). Today, a true multi-program laboratory has emerged, in which the life sciences participate as a full partner. The LBL Human Genome Center is a contribution to the growing international effort to map the human genome. Its achievements represent LBL divisions, including Engineering, Materials and Chemical Sciences, and Information and Computing Sciences, along with Cell and Molecular Biology and Chemical Biodynamics. The Advanced Light Source Life Sciences Center will comprise not only beamlines and experimental end stations, but also supporting laboratories and office space for scientists from across the US. This effort reflects a confluence of scientific disciplines --- this time represented by individuals from the life sciences divisions and by engineers and physicists associated with the Advanced Light Source project. And finally, this report itself, the first summarizing the efforts of all four life sciences divisions, suggests a new spirit of cooperation. 30 figs.

The Viability of Distance Education Science Laboratories.

Science.gov (United States)

Forinash, Kyle; Wisman, Raymond

2001-01-01

Discusses the effectiveness of offering science laboratories via distance education. Explains current delivery technologies, including computer simulations, videos, and laboratory kits sent to students; pros and cons of distance labs; the use of spreadsheets; and possibilities for new science education models. (LRW)

Mathematics and Computer Science | Argonne National Laboratory

Science.gov (United States)

Extreme Computing Data-Intensive Science Applied Mathematics Science & Engineering Applications Software Extreme Computing Data-Intensive Science Applied Mathematics Science & Engineering Opportunities For Employees Staff Directory Argonne National Laboratory Mathematics and Computer Science Tools

Materials Science Laboratory

Science.gov (United States)

Jackson, Dionne

2005-01-01

The NASA Materials Science Laboratory (MSL) provides science and engineering services to NASA and Contractor customers at KSC, including those working for the Space Shuttle. International Space Station. and Launch Services Programs. These services include: (1) Independent/unbiased failure analysis (2) Support to Accident/Mishap Investigation Boards (3) Materials testing and evaluation (4) Materials and Processes (M&P) engineering consultation (5) Metrology (6) Chemical analysis (including ID of unknown materials) (7) Mechanical design and fabrication We provide unique solutions to unusual and urgent problems associated with aerospace flight hardware, ground support equipment and related facilities.

Network Science Research Laboratory (NSRL) Discrete Event Toolkit

Science.gov (United States)

2016-01-01

ARL-TR-7579 ● JAN 2016 US Army Research Laboratory Network Science Research Laboratory (NSRL) Discrete Event Toolkit by...Laboratory (NSRL) Discrete Event Toolkit by Theron Trout and Andrew J Toth Computational and Information Sciences Directorate, ARL...Research Laboratory (NSRL) Discrete Event Toolkit 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Theron Trout

Egyptian Journal of Medical Laboratory Sciences: Advanced Search

African Journals Online (AJOL)

Egyptian Journal of Medical Laboratory Sciences: Advanced Search. Journal Home > Egyptian Journal of Medical Laboratory Sciences: Advanced Search. Log in or Register to get access to full text downloads.

Diversity in laboratory animal science: issues and initiatives.

Science.gov (United States)

Alworth, Leanne; Ardayfio, Krystal L; Blickman, Andrew; Greenhill, Lisa; Hill, William; Sharp, Patrick; Talmage, Roberta; Plaut, Victoria C; Goren, Matt

2010-03-01

Since diversity in the workplace began receiving scholarly attention in the late 1980s, many corporations and institutions have invested in programs to address and manage diversity. We encourage laboratory animal science to address the challenges and to build on the strengths that personal diversity brings to our field and workplaces. Diversity is already becoming increasingly relevant in the workplace and the laboratory animal science field. By addressing issues related to diversity, laboratory animal science could benefit and potentially fulfill its goals more successfully. To date, diversity has received minimal attention from the field as a whole. However, many individuals, workplaces, and institutions in industry, academia, and the uniformed services that are intimately involved with the field of laboratory animal science are actively addressing issues concerning diversity. This article describes some of these programs and activities in industry and academia. Our intention is that this article will provide useful examples of inclusion-promoting activities and prompt further initiatives to address diversity awareness and inclusion in laboratory animal science.

Reaching Consensus on Essential Biomedical Science Learning Objectives in a Dental Curriculum.

Science.gov (United States)

Best, Leandra; Walton, Joanne N; Walker, Judith; von Bergmann, HsingChi

2016-04-01

This article describes how the University of British Columbia Faculty of Dentistry reached consensus on essential basic biomedical science objectives for DMD students and applied the information to the renewal of its DMD curriculum. The Delphi Method was used to build consensus among dental faculty members and students regarding the relevance of over 1,500 existing biomedical science objectives. Volunteer panels of at least three faculty members (a basic scientist, a general dentist, and a dental specialist) and a fourth-year dental student were formed for each of 13 biomedical courses in the first two years of the program. Panel members worked independently and anonymously, rating each course objective as "need to know," "nice to know," "irrelevant," or "don't know." Panel members were advised after each round which objectives had not yet achieved a 75% consensus and were asked to reconsider their ratings. After a maximum of three rounds to reach consensus, a second group of faculty experts reviewed and refined the results to establish the biomedical science objectives for the renewed curriculum. There was consensus on 46% of the learning objectives after round one, 80% after round two, and 95% after round three. The second expert group addressed any remaining objectives as part of its review process. Only 47% of previous biomedical science course objectives were judged to be essential or "need to know" for the general dentist. The consensus reached by participants in the Delphi Method panels and a second group of faculty experts led to a streamlined, better integrated DMD curriculum to prepare graduates for future practice.

Educational Status of Dental Basic Science Course and its Correlation with Students' Educational Background in Kermanshah University of Medical Sciences

Directory of Open Access Journals (Sweden)

Mozafar Khazaei

2014-04-01

Full Text Available Introduction: Basic science course plays a pivotal role in the academic achievement of the students. The scientific background and educational performance of the students are also influential in this period. The aim of the present study was to investigate the educational status of dental basic science course in the first three admissions (2009-2011 and its association with students’ educational background in Kermanshah University of Medical Sciences (KUMS. Methods: In this descriptive cross-sectional study, all dental students admitted to school of dentistry in 2009-2011 years were included. The students’ academic background (scores, grade point average, score of comprehensive basic sciences examination (CBSE were recorded. Data were analyzed by SPSS 16 using one-way analysis of variance (ANOVA and independent t-test. Results: Kermanshah dental students admitted to university in 2009-2011 were mostly female (59.2%, belonged to regions 2 and 3 (81.6% of university entrance exam, had sciences diploma (89.8% and their grade point average of diploma was nearly 18. There was a significant difference between the three groups of students admitted to university in Biology, Chemistry, Mathematics, Arabic, English language and Theology lessones of entrane exam (P<0.05. The students’ failure rate was 1.5% in university coureses. They all (100% passed CBSE and were ranked second nationally in the year. There was no significant difference between male and female students in terms of age, diploma grade point average, grade point average of basic sciences and score of CBSE. Conclusion: Basic science courses of dentistry in Kermanshah enjoyed a rather constant status and students had a good academic level in these courses.

Prediction of practical performance in preclinical laboratory courses – the return of wire bending for admission of dental students in Hamburg

Directory of Open Access Journals (Sweden)

Kothe, Christian

2014-05-01

Full Text Available [english] Although some recent studies concluded that dexterity is not a reliable predictor of performance in preclinical laboratory courses in dentistry, they could not disprove earlier findings which confirmed the worth of manual dexterity tests in dental admission. We developed a wire bending test (HAM-Man which was administered during dental freshmen’s first week in 2008, 2009, and 2010. The purpose of our study was to evaluate if the HAM-Man is a useful selection criterion additional to the high school grade point average (GPA in dental admission. Regression analysis revealed that GPA only accounted for a maximum of 9% of students’ performance in preclinical laboratory courses, in six out of eight models the explained variance was below 2%. The HAM-Man incrementally explained up to 20.5% of preclinical practical performance over GPA. In line with findings from earlier studies the HAM-Man test of manual dexterity showed satisfactory incremental validity. While GPA has a focus on cognitive abilities, the HAM-Man reflects learning of unfamiliar psychomotor skills, spatial relationships, and dental techniques needed in preclinical laboratory courses. The wire bending test HAM-Man is a valuable additional selection instrument for applicants of dental schools.

The Evaluation of Relationship between Spirometric Disorders and Methyl methacrylate in Dental Laboratories Personnel

Directory of Open Access Journals (Sweden)

E. Nadi

2010-04-01

Full Text Available Introduction & Objective: Methyl methacrylate (MMA, as a monomer of acrylic resin that has a wide variety of usages in denture fabrication, is considered as an air pollution indicator in the laboratories. Occupational exposure to these compound vapors can cause respiratory hypersensitivity, occupational asthma, eye and skin irritation and Allergic Contact Dermatitis (ACD. Therefore control of MMA exposure may promote the personnel’s health. The aim of this study was to determine the relationship between spirometric disorders and methyl methacrylate in dental laboratories personnel.. Materials & Methods: In this case control study, exposure of time-weighted average (TWA and short-term exposure level (STEL were measured with MMA vapors in 39 randomly selected male employee (case group in 25 denture fabrication laboratories in Hamadan city. The air samples were collected by sorbent tubes containing chromosorb (XAD2( and analyzed by gas chromatograph equipped with FID detector based on NIOSH method. In addition 30 men whitout occupational exposure to air pollutants (control group were selected to compare the variation of spirometric parameters. Spirometric parameters of the case and control groups such as FVC, FEV1, FEV1/FVC and FEF25-75 were measured by Vitalograph spirometer (model: 2120 on ATS method, after the standard questionnaire of respiratory diseases had been completed during an interview and medical examination..Results: The mean of MMA concentration was 132.87 ± 220.67 ppm for STEL and 1.95 ± 3.59 ppm for TWA.The relationship between MMA concentration in the STEL and TWA exposures was significant (P<0.05 and the relationship between MMA concentration and ventilation was significant just for STEL. In this study no relationship between MMA concentration and spirometric parameters in both STEL and TWA exposures was found. Also there was no significant difference between spirometric parameters of the case group and normal values of the

Science outside the laboratory measurement in field science and economics

CERN Document Server

Boumans, Marcel

2015-01-01

The conduct of most of social science occurs outside the laboratory. Such studies in field science explore phenomena that cannot for practical, technical, or ethical reasons be explored under controlled conditions. These phenomena cannot be fully isolated from their environment or investigated by manipulation or intervention. Yet measurement, including rigorous or clinical measurement, does provide analysts with a sound basis for discerning what occurs under field conditions, and why. In Science Outside the Laboratory, Marcel Boumans explores the state of measurement theory, its reliability, and the role expert judgment plays in field investigations from the perspective of the philosophy of science. Its discussion of the problems of passive observation, the calculus of observation, the two-model problem, and model-based consensus uses illustrations drawn primarily from economics. Rich in research and discussion, the volume clarifies the extent to which measurement provides valid information about objects an...

A Review of Research on Technology-Assisted School Science Laboratories

Science.gov (United States)

Wang, Chia-Yu; Wu, Hsin-Ka; Lee, Silvia Wen-Yu; Hwang, Fu-Kwun; Chang, Hsin-Yi; Wu, Ying-Tien; Chiou, Guo-Li; Chen, Sufen; Liang, Jyh-Chong; Lin, Jing-Wen; Lo, Hao-Chang; Tsai, Chin-Chung

2014-01-01

Studies that incorporate technologies into school science laboratories have proliferated in the recent two decades. A total of 42 studies published from 1990 to 2011 that incorporated technologies to support school science laboratories are reviewed here. Simulations, microcomputer-based laboratories (MBLs), and virtual laboratories are commonly…

Roles of the International Council for Laboratory Animal Science (ICLAS) and International Association of Colleges of Laboratory Animal Medicine (IACLAM) in the Global Organization and Support of 3Rs Advances in Laboratory Animal Science

Science.gov (United States)

Turner, Patricia V; Pekow, Cynthia; Clark, Judy MacArthur; Vergara, Patri; Bayne, Kathryn; White, William J; Kurosawa, Tsutomu Miki; Seok, Seung-Hyeok; Baneux, Philippe

2015-01-01

Practical implementation of the 3Rs at national and regional levels around the world requires long-term commitment, backing, and coordinated efforts by international associations for laboratory animal medicine and science, including the International Association of Colleges of Laboratory Animal Medicine (IACLAM) and the International Council for Laboratory Animal Science (ICLAS). Together these organizations support the efforts of regional organization and communities of laboratory animal science professionals as well as the development of local associations and professional colleges that promote the training and continuing education of research facility personnel and veterinary specialists. The recent formation of a World Organization for Animal Health (OIE) Collaborating Center for Laboratory Animal Science and Welfare emphasizes the need for research into initiatives promoting laboratory animal welfare, particularly in emerging economies and regions with nascent associations of laboratory animal science. PMID:25836964

Managing Science: Management for R&D Laboratories

Science.gov (United States)

Gelès, Claude; Lindecker, Gilles; Month, Mel; Roche, Christian

1999-10-01

A unique "how-to" manual for the management of scientific laboratories This book presents a complete set of tools for the management of research and development laboratories and projects. With an emphasis on knowledge rather than profit as a measure of output and performance, the authors apply standard management principles and techniques to the needs of high-flux, open-ended, separately funded science and technology enterprises. They also propose the novel idea that failure, and incipient failure, is an important measure of an organization's potential. From the management of complex, round-the-clock, high-tech operations to strategies for long-term planning, Managing Science: Management for R&D Laboratories discusses how to build projects with the proper research and development, obtain and account for funding, and deal with rapidly changing technologies, facilities, and trends. The entire second part of the book is devoted to personnel issues and the impact of workplace behavior on the various functions of a knowledge-based organization. Drawing on four decades of involvement with the management of scientific laboratories, the authors thoroughly illustrate their philosophy with real-world examples from the physics field and provide tables and charts. Managers of scientific laboratories as well as scientists and engineers expecting to move into management will find Managing Science: Management for R&D Laboratories an invaluable practical guide.

Mars Science Laboratory Using Laser Instrument, Artist's Concept

Science.gov (United States)

2007-01-01

This artist's conception of NASA's Mars Science Laboratory portrays use of the rover's ChemCam instrument to identify the chemical composition of a rock sample on the surface of Mars. ChemCam is innovative for planetary exploration in using a technique referred to as laser breakdown spectroscopy to determine the chemical composition of samples from distances of up to about 8 meters (25 feet) away. ChemCam is led by a team at the Los Alamos National Laboratory and the Centre d'Etude Spatiale des Rayonnements in Toulouse, France. Mars Science Laboratory, a mobile robot for investigating Mars' past or present ability to sustain microbial life, is in development at NASA's Jet Propulsion Laboratory for a launch opportunity in 2009. The mission is managed by JPL, a division of the California Institute of Technology, Pasadena, Calif., for the NASA Science Mission Directorate, Washington.

Distance Education in Dental Hygiene Bachelor of Science Degree Completion Programs: As Perceived by Students and Faculty

Science.gov (United States)

Tsokris, Maureen

2010-01-01

This study investigated student and faculty perceptions of their experiences with online learning in dental hygiene Bachelor of Science degree completion programs on the dimensions of: quality of learning, connectedness to the learning environment, technology factors and student satisfaction. The experiences of dental hygiene students who took…

The Effect of Guided-Inquiry Laboratory Experiments on Science Education Students' Chemistry Laboratory Attitudes, Anxiety and Achievement

Science.gov (United States)

Ural, Evrim

2016-01-01

The study aims to search the effect of guided inquiry laboratory experiments on students' attitudes towards chemistry laboratory, chemistry laboratory anxiety and their academic achievement in the laboratory. The study has been carried out with 37 third-year, undergraduate science education students, as a part of their Science Education Laboratory…

Cognitive knowledge, attitude toward science, and skill development in virtual science laboratories

Science.gov (United States)

Babaie, Mahya

The purpose of this quantitative, descriptive, single group, pretest posttest design study was to explore the influence of a Virtual Science Laboratory (VSL) on middle school students' cognitive knowledge, skill development, and attitudes toward science. This study involved 2 eighth grade Physical Science classrooms at a large urban charter middle school located in Southern California. The Buoyancy and Density Test (BDT), a computer generated test, assessed students' scientific knowledge in areas of Buoyancy and Density. The Attitude Toward Science Inventory (ATSI), a multidimensional survey assessment, measured students' attitudes toward science in the areas of value of science in society, motivation in science, enjoyment of science, self-concept regarding science, and anxiety toward science. A Virtual Laboratory Packet (VLP), generated by the researcher, captured students' mathematical and scientific skills. Data collection was conducted over a period of five days. BDT and ATSI assessments were administered twice: once before the Buoyancy and Density VSL to serve as baseline data (pre) and also after the VSL (post). The findings of this study revealed that students' cognitive knowledge and attitudes toward science were positively changed as expected, however, the results from paired sample t-tests found no statistical significance. Analyses indicated that VSLs were effective in supporting students' scientific knowledge and attitude toward science. The attitudes most changed were value of science in society and enjoyment of science with mean differences of 1.71 and 0.88, respectively. Researchers and educational practitioners are urged to further examine VSLs, covering a variety of topics, with more middle school students to assess their learning outcomes. Additionally, it is recommended that publishers in charge of designing the VSLs communicate with science instructors and research practitioners to further improve the design and analytic components of these

Research report 1987-1989: Environmental Quality Laboratory and Environmental Engineering Science, W. M. Keck Laboratories

OpenAIRE

Brooks, Norman H.

1990-01-01

This research biennial report for 1987-89 covers the activities of both the Environmental Engineering Science program and the Environmental Quality Laboratory for the period October 1987-November 1989. Environmental Engineering Science is the degree-granting academic program housed in the Keck Laboratories, with associated research projects. The Environmental Quality Laboratory is a research center focusing on large scale problems of environmental quality and natural resources. All the facult...

Changing the way science is taught through gamified laboratories

DEFF Research Database (Denmark)

Bonde, Mads; Makransky, G.; Wandall, J.

2015-01-01

A large proportion of high school and college students indicate that they have little interest in science, and many graduate with marginal science competencies. However, laboratory exercises, usually the most engaging part of science courses, tend to be expensive, time consuming and occasionally...... the crime-scene case in an introductory, college-level, life science course was conducted revealed that a gamified laboratory simulation can significantly increase both learning outcomes and motivation levels when compared with, and particularly when combined with, traditional teaching....

An analysis of laboratory activities found in "Applications In Biology/Chemistry: A Contextual Approach to Laboratory Science"

Science.gov (United States)

Haskins, Sandra Sue

The purpose of this study was to quantitatively determine whether the material found in ABC promotes scientific inquiry through the inclusion of science process skills, and to quantitatively determine the type (experimental, comparative, or descriptive) and character (wet-lab, paper and pencil, model, or computer) of laboratory activities. The research design allowed for an examination of the frequency and type of science process skills required of students in 79 laboratory activities sampled from all 12 units utilizing a modified 33-item laboratory analysis inventory (LAI) (Germane et al, 1996). Interrater reliability for the science process skills was completed on 19 of the laboratory activities with a mean score of 86.1%. Interrater reliability for the type and character of the laboratory, on the same 19 laboratory activities, was completed with mean scores of 79.0% and 96.5%, respectively. It was found that all laboratory activities provide a prelaboratory activity. In addition, the science process skill category of student performance is required most often of students with the skill of learning techniques or manipulating apparatus occurring 99% of the time. The science process skill category observed the least was student planning and design, occurring only 3% of the time. Students were rarely given the opportunity to practice science process skills such as developing and testing hypotheses through experiments they have designed. Chi-square tests, applied at the .05 level of significance, revealed that there was a significant difference in the type of laboratory activities; comparative laboratory activities appeared more often (59%). In addition the character of laboratory activities, "wet-lab" activities appeared more often (90%) than any of the others.

Science teachers' perceptions of the effectiveness of technology in the laboratories: Implications for science education leadership

Science.gov (United States)

Yaseen, Niveen K.

2011-12-01

The purpose of this study was to identify science teachers' perceptions concerning the use of technology in science laboratories and identify teachers' concerns and recommendations for improving students' learning. Survey methodology with electronic delivery was used to gather data from 164 science teachers representing Texas public schools. The data confirmed that weaknesses identified in the 1990s still exist. Lack of equipment, classroom space, and technology access, as well as large numbers of students, were reported as major barriers to the implementation of technology in science laboratories. Significant differences were found based on gender, grade level, certification type, years of experience, and technology proficiency. Females, elementary teachers, traditionally trained teachers, and less experienced teachers revealed a more positive attitude toward the use of technology in science laboratories. Participants in this study preferred using science software simulations to support rather than replace traditional science laboratories. Teachers in this study recommended professional development programs that focused on strategies for a technology integrated classroom.

Dental Environmental Noise Evaluation and Health Risk Model Construction to Dental Professionals

OpenAIRE

Ma, Kuen Wai; Wong, Hai Ming; Mak, Cheuk Ming

2017-01-01

Occupational noise is unavoidably produced from dental equipment, building facilities, and human voices in the dental environment. The purpose of this study was to investigate the effect of occupational noise exposure on the dental professionals’ health condition. The psychoacoustics approach noise exposure assessment followed by the health risk assessment was carried on at the paediatric dentistry clinic and the dental laboratory in the Prince Philip Dental Hospital of Hong Kong. The A-weigh...

Physiology education in North American dental schools: the basic science survey series.

Science.gov (United States)

Gautam, Medha; Shaw, David H; Pate, Ted D; Lambert, H Wayne

2014-06-01

As part of the Basic Science Survey Series for Dentistry, members of the American Dental Education Association (ADEA) Physiology, Pharmacology, and Therapeutics Section surveyed directors of physiology courses in North American dental schools. The survey was designed to assess, among other things, faculty affiliation and experience of course directors, teaching methods, general course content and emphasis, extent of interdisciplinary (shared) instruction, and impact of recent curricular changes. Responses were received from forty-four of sixty-seven (65.7 percent) U.S. and Canadian dental schools. The findings suggest the following: substantial variation exists in instructional hours, faculty affiliation, class size, and interdisciplinary nature of physiology courses; physiology course content emphasis is similar between schools; student contact hours in physiology, which have remained relatively stable in the past fifteen years, are starting to be reduced; recent curricular changes have often been directed towards enhancing the integrative and clinically relevant aspects of physiology instruction; and a trend toward innovative content delivery, such as use of computer-assisted instruction, is evident. Data from this study may be useful to physiology course directors, curriculum committees, and other dental educators with an interest in integrative and interprofessional education.

Dental Environmental Noise Evaluation and Health Risk Model Construction to Dental Professionals.

Science.gov (United States)

Ma, Kuen Wai; Wong, Hai Ming; Mak, Cheuk Ming

2017-09-19

Occupational noise is unavoidably produced from dental equipment, building facilities, and human voices in the dental environment. The purpose of this study was to investigate the effect of occupational noise exposure on the dental professionals' health condition. The psychoacoustics approach noise exposure assessment followed by the health risk assessment was carried on at the paediatric dentistry clinic and the dental laboratory in the Prince Philip Dental Hospital of Hong Kong. The A-weighted equivalent sound level, total loudness, and sharpness values were statistically significantly higher for the noise at the laboratory than that at the clinic. The degree of perceived influences and sharpness of noise were found to have the impacts on the dental professionals' working performance and health. Moreover, the risk of having a bad hearing state would a have 26% and 31% higher chance for a unit increment of the short-term and long-term impact scores, respectively. The dental professionals with the service length more than 10 years and the daily working hours of more than eight showed the highest risk to their hearing state. The worse the hearing state was, the worse the health state was found for the dental professionals. Also, the risk of dissatisfaction would be increased by 4.41 and 1.22 times for those who worked at the laboratory and a unit increment of the long-term impact score. The constructed health risk mode with the scientific and statistical evidence is hence important for the future noise management of environmental improvement.

Biological and Physical Space Research Laboratory 2002 Science Review

Science.gov (United States)

Curreri, P. A. (Editor); Robinson, M. B. (Editor); Murphy, K. L. (Editor)

2003-01-01

With the International Space Station Program approaching core complete, our NASA Headquarters sponsor, the new Code U Enterprise, Biological and Physical Research, is shifting its research emphasis from purely fundamental microgravity and biological sciences to strategic research aimed at enabling human missions beyond Earth orbit. Although we anticipate supporting microgravity research on the ISS for some time to come, our laboratory has been vigorously engaged in developing these new strategic research areas.This Technical Memorandum documents the internal science research at our laboratory as presented in a review to Dr. Ann Whitaker, MSFC Science Director, in July 2002. These presentations have been revised and updated as appropriate for this report. It provides a snapshot of the internal science capability of our laboratory as an aid to other NASA organizations and the external scientific community.

Surface texture measurement for dental wear applications

Science.gov (United States)

Austin, R. S.; Mullen, F.; Bartlett, D. W.

2015-06-01

The application of surface topography measurement and characterization within dental materials science is highly active and rapidly developing, in line with many modern industries. Surface measurement and structuring is used extensively within oral and dental science to optimize the optical, tribological and biological performance of natural and biomimetic dental materials. Although there has historically been little standardization in the use and reporting of surface metrology instrumentation and software, the dental industry is beginning to adopt modern areal measurement and characterization techniques, especially as the dental industry is increasingly adopting digital impressioning techniques in order to leverage CAD/CAM technologies for the design and construction of dental restorations. As dental treatment becomes increasingly digitized and reliant on advanced technologies such as dental implants, wider adoption of standardized surface topography and characterization techniques will become evermore essential. The dental research community welcomes the advances that are being made in surface topography measurement science towards realizing this ultimate goal.

The relationship between study skill and academic achievement in dental students of Tehran University of Medical Sciences

Directory of Open Access Journals (Sweden)

Shirazian Shiva

2015-12-01

Full Text Available Background and Aims: The purpose of the present study was to investigate the relationship between study skills and academic performance of dental students in Tehran University of Medical Sciences. Materials and Methods: 195 dental students at dental faculty of Tehran University of Medical Sciences in 2013 participated in this descriptive-analytical study. Data were collected using Congos´ Study Skills Inventory including six subscales. Grade Point Average (GPA indicated their academic performance. Data were analyzed using ANOVA and Tukey test. Results: The mean score of students’ study skills were 108 out of 200 with standard deviation of 22.06±0.7. Note taking had a significant correlation with GPA (P=0.015. Conclusion: Since no significant correlation between study skills and academic performance of the students was observed, it seems that there are other dynamics involved in their academic performance which have to be examined.

The Development of Laboratory Safety Questionnaire for Middle School Science Teachers

Science.gov (United States)

Akpullukcu, Simge; Cavas, Bulent

2017-01-01

The purpose of this paper is to develop a "valid and reliable laboratory safety questionnaire" which could be used to identify science teachers' understanding about laboratory safety issues during their science laboratory activities. The questionnaire was developed from a literature review and prior instruments developed on laboratory…

Deep Underground Science and Engineering Laboratory - Preliminary Design Report

CERN Document Server

Lesko, Kevin T; Alonso, Jose; Bauer, Paul; Chan, Yuen-Dat; Chinowsky, William; Dangermond, Steve; Detwiler, Jason A; De Vries, Syd; DiGennaro, Richard; Exter, Elizabeth; Fernandez, Felix B; Freer, Elizabeth L; Gilchriese, Murdock G D; Goldschmidt, Azriel; Grammann, Ben; Griffing, William; Harlan, Bill; Haxton, Wick C; Headley, Michael; Heise, Jaret; Hladysz, Zbigniew; Jacobs, Dianna; Johnson, Michael; Kadel, Richard; Kaufman, Robert; King, Greg; Lanou, Robert; Lemut, Alberto; Ligeti, Zoltan; Marks, Steve; Martin, Ryan D; Matthesen, John; Matthew, Brendan; Matthews, Warren; McConnell, Randall; McElroy, William; Meyer, Deborah; Norris, Margaret; Plate, David; Robinson, Kem E; Roggenthen, William; Salve, Rohit; Sayler, Ben; Scheetz, John; Tarpinian, Jim; Taylor, David; Vardiman, David; Wheeler, Ron; Willhite, Joshua; Yeck, James

2011-01-01

The DUSEL Project has produced the Preliminary Design of the Deep Underground Science and Engineering Laboratory (DUSEL) at the rehabilitated former Homestake mine in South Dakota. The Facility design calls for, on the surface, two new buildings - one a visitor and education center, the other an experiment assembly hall - and multiple repurposed existing buildings. To support underground research activities, the design includes two laboratory modules and additional spaces at a level 4,850 feet underground for physics, biology, engineering, and Earth science experiments. On the same level, the design includes a Department of Energy-shepherded Large Cavity supporting the Long Baseline Neutrino Experiment. At the 7,400-feet level, the design incorporates one laboratory module and additional spaces for physics and Earth science efforts. With input from some 25 science and engineering collaborations, the Project has designed critical experimental space and infrastructure needs, including space for a suite of multi...

An evaluation of community college student perceptions of the science laboratory and attitudes towards science in an introductory biology course

Science.gov (United States)

Robinson, Nakia Rae

The science laboratory is an integral component of science education. However, the academic value of student participation in the laboratory is not clearly understood. One way to discern student perceptions of the science laboratory is by exploring their views of the classroom environment. The classroom environment is one determinant that can directly influence student learning and affective outcomes. Therefore, this study sought to examine community college students' perceptions of the laboratory classroom environment and their attitudes toward science. Quantitative methods using two survey instruments, the Science Laboratory Environment Instrument (SLEI) and the Test of Science Related Attitudes (TORSA) were administered to measure laboratory perceptions and attitudes, respectively. A determination of differences among males and females as well as three academic streams were examined. Findings indicated that overall community college students had positive views of the laboratory environment regardless of gender of academic major. However, the results indicated that the opportunity to pursue open-ended activities in the laboratory was not prevalent. Additionally, females viewed the laboratory material environment more favorably than their male classmates did. Students' attitudes toward science ranged from favorable to undecided and no significant gender differences were present. However, there were significantly statistical differences between the attitudes of nonscience majors compared to both allied health and STEM majors. Nonscience majors had less positive attitudes toward scientific inquiry, adoption of scientific attitudes, and enjoyment of science lessons. Results also indicated that collectively, students' experiences in the laboratory were positive predicators of their attitudes toward science. However, no laboratory environment scale was a significant independent predictor of student attitudes. .A students' academic streams was the only significant

Pharmacology education in North American dental schools: the basic science survey series.

Science.gov (United States)

Gautam, Medha; Shaw, David H; Pate, Ted D; Lambert, H Wayne

2013-08-01

As part of the Basic Science Survey Series (BSSS) for Dentistry, members of the American Dental Education Association (ADEA) Physiology, Pharmacology, and Therapeutics Section surveyed course directors of basic pharmacology courses in North American dental schools. The survey was designed to assess, among other things, faculty affiliation and experience of course directors, teaching methods, general course content and emphasis, extent of interdisciplinary (shared) instruction, and impact of recent curricular changes. Responses were received from forty-nine of sixty-seven (73.1 percent) U.S. and Canadian dental schools. The findings suggest the following: 1) substantial variation exists in instructional hours, faculty affiliation, placement within curriculum, class size, and interdisciplinary nature of pharmacology courses; 2) pharmacology course content emphasis is similar among schools; 3) the number of contact hours in pharmacology has remained stable over the past three decades; 4) recent curricular changes were often directed towards enhancing the integrative and clinically relevant aspects of pharmacology instruction; and 5) a trend toward innovative content delivery, such as use of computer-assisted instruction applications, is evident. Data, derived from this study, may be useful to pharmacology course directors, curriculum committees, and other dental educators with an interest in integrative and interprofessional education.

Use of High-Definition Audiovisual Technology in a Gross Anatomy Laboratory: Effect on Dental Students' Learning Outcomes and Satisfaction.

Science.gov (United States)

Ahmad, Maha; Sleiman, Naama H; Thomas, Maureen; Kashani, Nahid; Ditmyer, Marcia M

2016-02-01

Laboratory cadaver dissection is essential for three-dimensional understanding of anatomical structures and variability, but there are many challenges to teaching gross anatomy in medical and dental schools, including a lack of available space and qualified anatomy faculty. The aim of this study was to determine the efficacy of high-definition audiovisual educational technology in the gross anatomy laboratory in improving dental students' learning outcomes and satisfaction. Exam scores were compared for two classes of first-year students at one U.S. dental school: 2012-13 (no audiovisual technology) and 2013-14 (audiovisual technology), and section exams were used to compare differences between semesters. Additionally, an online survey was used to assess the satisfaction of students who used the technology. All 284 first-year students in the two years (2012-13 N=144; 2013-14 N=140) participated in the exams. Of the 140 students in the 2013-14 class, 63 completed the survey (45% response rate). The results showed that those students who used the technology had higher scores on the laboratory exams than those who did not use it, and students in the winter semester scored higher (90.17±0.56) than in the fall semester (82.10±0.68). More than 87% of those surveyed strongly agreed or agreed that the audiovisual devices represented anatomical structures clearly in the gross anatomy laboratory. These students reported an improved experience in learning and understanding anatomical structures, found the laboratory to be less overwhelming, and said they were better able to follow dissection instructions and understand details of anatomical structures with the new technology. Based on these results, the study concluded that the ability to provide the students a clear view of anatomical structures and high-quality imaging had improved their learning experience.

Knowledge and performance of dental students with regard to infection control guidelines in Dental School of Mazandaran University of Medical Sciences in 2015

Directory of Open Access Journals (Sweden)

Alireza Ebrahimpour

2016-08-01

Full Text Available Dentists are at risk of infectious diseases and dental offices can serve as a source of infection transmission if the infection control guidelines are not properly implemented. Adherence to infection control principles can help prevent disease transmission. This study sought to assess the level of knowledge and performance of dental students with regard to infection control principles in dental clinics of School of Dentistry, Mazandaran University of Medical Sciences. This study was conducted on 87 dental students. Data were collected using a 9-question questionnaire and a 16-item checklist. The data were analyzed using SPSS version 21 and descriptive statistics by calculation of mean and standard deviation (SD, t-test, Chi square test, Kruskal Wallis test and the Spearman’s correlation coefficient. Level of significance was set at P=0.05.Of subjects, 100% were wearing sterile gloves and changed them for each patient, collected and disposed wastes after examination or treatment of each patient, capped the needle after anesthetic injection and changed the dental suction tip; 94% were wearing a mask and changed it for each patient; 89% were wearing clean white coats. The level of knowledge of students was found to be moderate. Also, the performance of students with regard to infection control principles was found to be very good probably due to the rules and regulations set by the dental school departments.

Energy conservation attitudes, knowledge, and behaviors in science laboratories

International Nuclear Information System (INIS)

Kaplowitz, Michael D.; Thorp, Laurie; Coleman, Kayla; Kwame Yeboah, Felix

2012-01-01

Energy use per square foot from science research labs is disproportionately higher than that of other rooms in buildings on campuses across the nation. This is partly due to labs’ use of energy intensive equipment. However, laboratory management and personnel behavior may be significant contributing factors to energy consumption. Despite an apparent increasing need for energy conservation in science labs, a systematic investigation of avenues promoting energy conservation behavior in such labs appears absent in scholarly literature. This paper reports the findings of a recent study into the energy conservation knowledge, attitude and behavior of principle investigators, laboratory managers, and student lab workers at a tier 1 research university. The study investigates potential barriers as well as promising avenues to reducing energy consumption in science laboratories. The findings revealed: (1) an apparent lack of information about options for energy conservation in science labs, (2) existing operational barriers, (3) economic issues as barriers/motivators of energy conservation and (4) a widespread notion that cutting edge science may be compromised by energy conservation initiatives. - Highlights: ► Effective energy conservation and efficiency depend on social systems and human behaviors. ► Science laboratories use more energy per square foot than any other academic and research spaces. ► Time, money, quality control, and convenience overshadow personnel’s desire to save energy. ► Ignorance of conservation practices is a barrier to energy conservation in labs.

The current status of forensic science laboratory accreditation in Europe.

Science.gov (United States)

Malkoc, Ekrem; Neuteboom, Wim

2007-04-11

Forensic science is gaining some solid ground in the area of effective crime prevention, especially in the areas where more sophisticated use of available technology is prevalent. All it takes is high-level cooperation among nations that can help them deal with criminality that adopts a cross-border nature more and more. It is apparent that cooperation will not be enough on its own and this development will require a network of qualified forensic laboratories spread over Europe. It is argued in this paper that forensic science laboratories play an important role in the fight against crime. Another, complimentary argument is that forensic science laboratories need to be better involved in the fight against crime. For this to be achieved, a good level of cooperation should be established and maintained. It is also noted that harmonization is required for such cooperation and seeking accreditation according to an internationally acceptable standard, such as ISO/IEC 17025, will eventually bring harmonization as an end result. Because, ISO/IEC 17025 as an international standard, has been a tool that helps forensic science laboratories in the current trend towards accreditation that can be observed not only in Europe, but also in the rest of the world of forensic science. In the introduction part, ISO/IEC 17025 states that "the acceptance of testing and calibration results between countries should be facilitated if laboratories comply with this international standard and if they obtain accreditation from bodies which have entered into mutual recognition agreements with equivalent bodies in other countries using this international standard." Furthermore, it is emphasized that the use of this international standard will assist in the harmonization of standards and procedures. The background of forensic science cooperation in Europe will be explained by using an existing European forensic science network, i.e. ENFSI, in order to understand the current status of forensic

Dental technology services and industry trends in New Zealand from 2010 to 2012.

Science.gov (United States)

Alameri, S S; Aarts, J M; Smith, M; Waddell, J N

2014-06-01

To provide a snapshot of the New Zealand dental technology industry and influencing factors. Developing an understanding of the commercial dental laboratory environment in New Zealand can provide insight into the entire dental industry. A web-based survey was the primary method for data collection, with separate questionnaires used for dental laboratory owners and dental technician employees. The mean net income for dental laboratory owners in New Zealand was similar to that of the United Kingdom, at $40.50 per hour. Clinical dental technicians are the highest paid employees, with a mean of $33.49 per hour. The mean technical charge for complete dentures was $632.59; including clinical services, it was $1907.00. The mean charge for a porcelain-fused-to-metal (PFM) crown was $290.27. Dental laboratory owners expressed fear about the possibility of losing dental clients to overseas laboratories due to the availability and cheap charge of offshore work. Only 25.4% of dental laboratories surveyed had computer-aided design (CAD) facilities, and even fewer (7.9%) had computer-aided manufacturing (CAM) systems. Clinical dental technology appears to be prospering. The dental technology industry appears to be adapting and remains viable, despite facing many challenges.

The laboratory in higher science education: Problems, premises and objectives

NARCIS (Netherlands)

Kirschner, P.A.; Meester, M.A.M.

1988-01-01

A university study in the natural sciences, devoid of a practical component such as laboratory work is virtually unthinkable. One could even go so far as saying that it is extremely rare for anyone to question the necessity of laboratory work in either high school or university science

Educating Laboratory Science Learners at a Distance Using Interactive Television

Science.gov (United States)

Reddy, Christopher

2014-01-01

Laboratory science classes offered to students learning at a distance require a methodology that allows for the completion of tactile activities. Literature describes three different methods of solving the distance laboratory dilemma: kit-based laboratory experience, computer-based laboratory experience, and campus-based laboratory experience,…

Status of Safety Precautions in Science Laboratories in Enugu State ...

African Journals Online (AJOL)

This study was conducted to determine the status of safety precautions in science laboratories in Enugu State of Nigeria. Three research questions and two hypotheses guided the study. The research questions include: 1. What are the sources of hazards in school science laboratories? 2. What are the causes of accidents in ...

Environmental Molecular Sciences Laboratory Annual Report: Fiscal Year 2006

Energy Technology Data Exchange (ETDEWEB)

Foster, Nancy S.; Showalter, Mary Ann

2007-03-23

This report describes the activities and research performed at the Environmental Molecular Sciences Laboratory, a Department of Energy national scientific user facility at Pacific Northwest National Laboratory, during Fiscal Year 2006.

The Effect of Using 3E, 5E Learning Cycle in General Chemistry Laboratory to Prospective Science Teachers Attitude and Perceptions to the Science, Chemistry and Laboratory

OpenAIRE

Toprak, Fatih; Çelikler, Dilek

2013-01-01

The study aimed to investigate the emerging changes in prospective science teachers" attitudes and perceptions towards science, chemistry and laboratory resulting from the implementation of 3E. 5E learning cycles and traditional instruction in laboratory environment in which learning is achieved by doing and experiencing. The study included 74 first grade prospective science teachers from Ondokuz Mayıs University at the Department of Science Education. In the study, quasi-experimental pre-tes...

Dental Sealants Prevent Cavities

Science.gov (United States)

... Digital Press Kit Read the MMWR Science Clips Dental Sealants Prevent Cavities Effective protection for children Language: ... more use of sealants and reimbursement of services. Dental care providers can Apply sealants to children at ...

Quality Assurance in Custom Dental Devices: A Technologist's Perspective.

Science.gov (United States)

Griffin, Anthony

2017-12-01

Manufacturing of custom-made dental devices such as removable dentures, fixed prosthodontics and orthodontics are subject to the requirements of the Medical Devices Directive (MDD). Many dental laboratories often enhance these requirements by implementing quality assurance procedures that then provide enhanced consistency. this paper provides a dental technologist's view of some of the systems currently being used in dental laboratories to provide a quality assured product and associated issues.

Investigating the status and barriers of science laboratory activities ...

African Journals Online (AJOL)

Amy Stambach

of 1502 secondary schools) schools having science laboratories (MINEDUC, 2014). ... focusing on primary teacher‟s pre-service education in terms of trainability ..... teaching approaches used in teaching „science and elementary technology ...

Math and science education programs from the Idaho National Engineering Laboratory

International Nuclear Information System (INIS)

1991-01-01

This booklet reviews math and science education programs at the Idaho National Engineering Laboratory (INEL). The programs can be categorized into six groups: teacher programs; science laboratories for students; student programs; education outreach programs; INEL Public Affairs Office; and programs for college faculty and students

Dental photography today. Part 1: basic concepts.

Science.gov (United States)

Casaglia, A; DE Dominicis, P; Arcuri, L; Gargari, M; Ottria, L

2015-01-01

This paper is the first article in a new series on digital dental photography. Part 1 defines the aims and objectives of dental photography for examination, diagnosis and treatment planning, legal and forensic documentation, publishing, education, marketing and communication with patients, dental team members, colleagues and dental laboratory.

Regenerative dentistry: translating advancements in basic science research to the dental practice.

Science.gov (United States)

Garcia-Godoy, Franklin; Murray, Peter

2010-01-01

Scientific advances in the creation of restorative biomaterials, in vitro cell culture technology, tissue engineering, molecular biology and the human genome project provide the basis for the introduction of new technologies into dentistry. This review provides an assessment of how tissue engineering, stem cell, genetic transfer, biomaterial and growth factor therapies can be integrated into clinical dental therapies to restore and regenerate oral tissues. In parallel to the creation of a new field in general medicine called "regenerative medicine," we call this field "regenerative dentistry." While the problems of introducing regenerative therapies are substantial, the potential benefits to patients and the profession are equally ground-breaking. In this review, we outline a few areas of interest for the future of oral and dental medicine in which advancements in basic science have already been adapted to fit the goals of 21st century dentistry.

Sandia National Laboratories: Microsystems Science & Technology Center

Science.gov (United States)

Environmental Management System Pollution Prevention History 60 impacts Diversity Locations Facts & Figures Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers

78 FR 32637 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

Science.gov (United States)

2013-05-31

..., Science and Technology Reinvention Laboratory Personnel Management Demonstration Project, Department of... DEPARTMENT OF DEFENSE Office of the Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration Project, Department of the Army, Army Research, Development and...

Scientific data management in the environmental molecular sciences laboratory

Energy Technology Data Exchange (ETDEWEB)

Bernard, P.R.; Keller, T.L.

1995-09-01

The Environmental Molecular Sciences Laboratory (EMSL) is currently under construction at Pacific Northwest Laboratory (PNL) for the U.S. Department of Energy (DOE). This laboratory will be used for molecular and environmental sciences research to identify comprehensive solutions to DOE`s environmental problems. Major facilities within the EMSL include the Molecular Sciences Computing Facility (MSCF), a laser-surface dynamics laboratory, a high-field nuclear magnetic resonance (NMR) laboratory, and a mass spectrometry laboratory. The EMSL is scheduled to open early in 1997 and will house about 260 resident and visiting scientists. It is anticipated that at least six (6) terabytes of data will be archived in the first year of operation. An object-oriented database management system (OODBMS) and a mass storage system will be integrated to provide an intelligent, automated mechanism to manage data. The resulting system, called the DataBase Computer System (DBCS), will provide total scientific data management capabilities to EMSL users. A prototype mass storage system based on the National Storage Laboratory`s (NSL) UniTree has been procured and is in limited use. This system consists of two independent hierarchies of storage devices. One hierarchy of lower capacity, slower speed devices provides support for smaller files transferred over the Fiber Distributed Data Interface (FDDI) network. Also part of the system is a second hierarchy of higher capacity, higher speed devices that will be used to support high performance clients (e.g., a large scale parallel processor). The ObjectStore OODBMS will be used to manage metadata for archived datasets, maintain relationships between archived datasets, and -hold small, duplicate subsets of archived datasets (i.e., derivative data). The interim system is called DBCS, Phase 0 (DBCS-0). The production system for the EMSL, DBCS Phase 1 (DBCS-1), will be procured and installed in the summer of 1996.

Chemistry Students' Challenges in Using MBL's in Science Laboratories.

Science.gov (United States)

Atar, Hakan Yavuz

Understanding students' challenges about using microcomputer based laboratories (MBLs) would provide important data in understanding the appropriateness of using MBLs in high school chemistry laboratories. Identifying students' concerns about this technology will in part help educators identify the obstacles to science learning when using this…

Liability of Science Educators for Laboratory Safety. NSTA Position Statement

Science.gov (United States)

National Science Teachers Association (NJ1), 2007

2007-01-01

Laboratory investigations are essential for the effective teaching and learning of science. A school laboratory investigation ("lab") is an experience in the laboratory, classroom, or the field that provides students with opportunities to interact directly with natural phenomena or with data collected by others using tools, materials, data…

CaTs Lab (CHAOS and Thermal Sciences Laboratory)

Science.gov (United States)

Teate, Anthony A.

2002-01-01

The CHAOS and Thermal Sciences Laboratory (CaTs) at James Madison University evolved into a noteworthy effort to increase minority representation in the sciences and mathematics. Serving ten students and faculty directly, and nearly 50 students indirectly, CaTs, through recruitment efforts, workshops, mentoring programs, tutorial services and research and computational laboratories, fulfilled its intent to initiate an academically enriched research program aimed at strengthening the academic and self-actualization skills of undergraduate students with potential to pursue doctoral study in the sciences. The stated goal of the program was to increase by 5% the number of enrolled mathematics and science students into the program. Success far exceeded the program goals by producing 100% graduation rate of all supported recipients during its tenure, with 30% of the students subsequently in pursuit of graduate degrees. Student retention in the program exceeded 90% and faculty participation exceeded the three members involved in mentoring and tutoring, gaining multi-disciplinary support. Aggressive marketing of the program resulted in several paid summer internships and commitments from NASA and an ongoing relationship with CHROME, a nationally recognized organization which focuses on developing minority students in the sciences and mathematics. Success of the program was only limited by the limited fiscal resources at NASA which resulted in phasing out of the program.

Integration of Basic and Clinical Sciences: Faculty Perspectives at a U.S. Dental School.

Science.gov (United States)

van der Hoeven, Dharini; van der Hoeven, Ransome; Zhu, Liang; Busaidy, Kamal; Quock, Ryan L

2018-04-01

Although dental education has traditionally been organized into basic sciences education (first and second years) and clinical education (third and fourth years), there has been growing interest in ways to better integrate the two to more effectively educate students and prepare them for practice. Since 2012, The University of Texas School of Dentistry at Houston (UTSD) has made it a priority to improve integration of basic and clinical sciences, with a focus to this point on integrating the basic sciences. The aim of this study was to determine the perspectives of basic and clinical science faculty members regarding basic and clinical sciences integration and the degree of integration currently occurring. In October 2016, all 227 faculty members (15 basic scientists and 212 clinicians) were invited to participate in an online survey. Of the 212 clinicians, 84 completed the clinician educator survey (response rate 40%). All 15 basic scientists completed the basic science educator survey (response rate 100%). The majority of basic and clinical respondents affirmed the value of integration (93.3%, 97.6%, respectively) and reported regular integration in their teaching (80%, 86.9%). There were no significant differences between basic scientists and clinicians on perceived importance (p=0.457) and comfort with integration (p=0.240), but the basic scientists were more likely to integrate (p=0.039) and collaborate (p=0.021) than the clinicians. There were no significant differences between generalist and specialist clinicians on importance (p=0.474) and degree (p=0.972) of integration in teaching and intent to collaborate (p=0.864), but the specialists reported feeling more comfortable presenting basic science information (p=0.033). Protected faculty time for collaborative efforts and a repository of integrated basic science and clinical examples for use in teaching and faculty development were recommended to improve integration. Although questions might be raised about

Student perceptions of the clinical laboratory science profession.

Science.gov (United States)

McClure, Karen

2009-01-01

The purpose of this paper is to describe the attitudes and perceptions among college biology and CLS/CLT students. These students were on selected college campuses at Texas universities in Houston, Dallas and the Austin/San Antonio areas for the Spring 2007 semester. Specifically, students were questioned on factors that influence their choice of field of study, career expectations, legislative measures which might be used to attract individuals to the career, and factors that will be required to keep them in the field of practice. This study was part of a larger qualitative study which included exploratory discovery and inductive logic regarding the attitudes of four focus groups in Texas. Focus groups took place on college campuses or in hotel conference rooms. (1) junior/senior-level college biology students and (2) junior/senior-level students currently enrolled in CLS/CLT programs. Focus group discussions using a standard set of questions; group sessions lasted about 45 minutes. This study was a qualitative study which included exploratory discovery and inductive logic regarding the attitudes of two groups in Texas. College biology and CLS/CLT students find the clinical laboratory science profession to be interesting and exciting as a career prospect, however, many do not see themselves remaining in the profession and perceive it does not have good prospects for career advancement. The majority of students must work to support themselves through their college education and would welcome additional grants, scholarships and loan forgiveness programs as incentives to study the clinical laboratory sciences. Students believe that additional recruitment on high school and college campuses is needed to increase the visibility of the field as career choice. The majority of students who are entering the clinical laboratory science profession do not see the profession as their final career choice, but rather a stepping stone to another career field in healthcare or a

A pocket guide to electronic laboratory notebooks in the academic life sciences.

Science.gov (United States)

Dirnagl, Ulrich; Przesdzing, Ingo

2016-01-01

Every professional doing active research in the life sciences is required to keep a laboratory notebook. However, while science has changed dramatically over the last centuries, laboratory notebooks have remained essentially unchanged since pre-modern science. We argue that the implementation of electronic laboratory notebooks (eLN) in academic research is overdue, and we provide researchers and their institutions with the background and practical knowledge to select and initiate the implementation of an eLN in their laboratories. In addition, we present data from surveying biomedical researchers and technicians regarding which hypothetical features and functionalities they hope to see implemented in an eLN, and which ones they regard as less important. We also present data on acceptance and satisfaction of those who have recently switched from paper laboratory notebook to an eLN.  We thus provide answers to the following questions: What does an electronic laboratory notebook afford a biomedical researcher, what does it require, and how should one go about implementing it?

SAFETY IN THE DESIGN OF SCIENCE LABORATORIES AND BUILDING CODES.

Science.gov (United States)

HOROWITZ, HAROLD

THE DESIGN OF COLLEGE AND UNIVERSITY BUILDINGS USED FOR SCIENTIFIC RESEARCH AND EDUCATION IS DISCUSSED IN TERMS OF LABORATORY SAFETY AND BUILDING CODES AND REGULATIONS. MAJOR TOPIC AREAS ARE--(1) SAFETY RELATED DESIGN FEATURES OF SCIENCE LABORATORIES, (2) LABORATORY SAFETY AND BUILDING CODES, AND (3) EVIDENCE OF UNSAFE DESIGN. EXAMPLES EMPHASIZE…

Quality knowledge of science through virtual laboratory as an element of visualization

Science.gov (United States)

Rizman Herga, Natasa

Doctoral dissertation discusses the use of virtual laboratory for learning and teaching chemical concepts at science classes in the seventh grade of primary school. The dissertation has got a two-part structure. In the first theoretical part presents a general platform of teaching science in elementary school, teaching forms and methods of teaching and among modern approaches we highlight experimental work. Particular emphasis was placed on the use of new technologies in education and virtual laboratories. Scientific findings on the importance of visualization of science concepts and their triple nature of their understanding are presented. These findings represent a fundamental foundation of empirical research presented in the second part of the doctoral dissertation, whose basic purpose was to examine the effectiveness of using virtual laboratory for teaching and learning chemical contents at science from students' point of view on knowledge and interest. We designed a didactic experiment in which 225 pupils participated. The work was conducted in the experimental and control group. Prior to its execution, the existing school practice among science and chemistry teachers was analysed in terms of: (1) inclusion of experimental work as a fundamental method of active learning chemical contents, (2) the use of visualization methods in the classroom and (3) the use of a virtual laboratory. The main findings of the empirical research, carried out in the school year 2012/2013, in which 48 science and chemistry participated, are that teachers often include experimental work when teaching chemical contents. Interviewed science teachers use a variety of visualization methods when presenting science concepts, in particular computer animation and simulation. Using virtual laboratory as a new strategy for teaching and learning chemical contents is not common because teachers lack special-didactic skills, enabling them to use virtual reality technology. Based on the didactic

Investigating the status and barriers of science laboratory activities ...

African Journals Online (AJOL)

This study aims at investigating the barriers encountered by science teachers in laboratory activities in Rwandan teacher training colleges (TTCs) using questionnaires and interviews. The results confirmed that teachers face barriers like time limitation, material scarcity and lack of improvising skills in their everyday science ...

A Guide to Undergraduate Science Course and Laboratory Improvements.

Science.gov (United States)

Straumanis, Joan, Ed.; Watson, Robert F., Ed.

Reported are activities carried out at colleges and universities during 1976-1980 with support from the National Science Foundation's Local Course Improvement (LOCI) and Instructional Scientific Equipment Program (ISEP). It is intended as a reference for persons interested in current course and laboratory developments in the sciences at the…

The role of peer assisted learning to improve the effectivity of clinical skill laboratory learning in dental education

Directory of Open Access Journals (Sweden)

Agus Ardinansyah

2016-06-01

Full Text Available Nowadays, the clinical skill learning in dental education has begun in pre-clinic, known as Clinical Skill Laboratory (CSL which needs human resources, many and expensive tools and manikins, and enough times for practise. One of the method used in CSL in dental education is PeerAssisted Learning (PAL defined as “the development of knowledge and skill through active help and support among status equals or match companions”. This paper aims is to explain the role of PAL method to improve the effectivity of CSL learning in dental education in preclinical stage. Reviewing on the relevant literatures regarding peer assisted learning on the implementation of the clinical skill laboratory in dental education. The effectivity of CSL learning needs close supervision and individual feedback, so enough tutors is important through the process. This PAL method considered to be helpfull with the increasing numbers of dental students and the limitation of staff faculty. This method is found feasible, well accepted by peer-tutors and students, and can be as effective as conventional learning method. This is also useful for peer-teacher because they more intrinsically motivated, have higher conceptual learning scores, and perceive themselves to be more actively engaged with the environment than students who learn in order to be tested.  However, there are several limitation of this method. The contact time between students and medical doctors may decrease significantlyand it does not seem to be generally qualified to transfer such complex procedures.It also needs peer-teachers training and a detailed manual. Questions concerning the cost-effectiveness and profitability of student tutor-guided technical skills training may thus arise. But one institution that implemented this method states that the majority of their tutors decided to continue their teaching activity in the skills lab and that these experienced tutors, in addition to established faculty staff

Environmental Molecular Sciences Laboratory 2004 Annual Report

Energy Technology Data Exchange (ETDEWEB)

White, Julia C.

2005-04-17

This 2004 Annual Report describes the research and accomplishments of staff and users of the W.R. Wiley Environmental Molecular Sciences Laboratory (EMSL), located in Richland, Washington. EMSL is a multidisciplinary, national scientific user facility and research organization, operated by Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy's Office of Biological and Environmental Research. The resources and opportunities within the facility are an outgrowth of the U.S. Department of Energy's (DOE) commitment to fundamental research for understanding and resolving environmental and other critical scientific issues.

Definition of Life Sciences laboratories for shuttle/Spacelab. Volume 1: Executive summary

Science.gov (United States)

1975-01-01

Research requirements and the laboratories needed to support a Life Sciences research program during the shuttle/Spacelab era were investigated. A common operational research equipment inventory was developed to support a comprehensive but flexible Life Sciences program. Candidate laboratories and operational schedules were defined and evaluated in terms of accomodation with the Spacelab and overall program planning. Results provide a firm foundation for the initiation of a life science program for the shuttle era.

Perception of Dental Professionals towards Biostatistics

OpenAIRE

Batra, Manu; Gupta, Mudit; Dany, Subha Soumya; Rajput, Prashant

2014-01-01

Biostatistics is becoming an integral part of dental sciences. Awareness regarding the subject is not thoroughly assessed in the field of dentistry. So the study was conducted to assess dental professionals' knowledge, attitude, and perception toward biostatistics at an academic dental institution. An anonymous cross-sectional questionnaire survey was conducted among all the faculty and postgraduate students of two dental colleges in Moradabad, Uttar Pradesh. The responses were assessed on 5-...

Use and Acceptance of Information and Communication Technology Among Laboratory Science Students

Science.gov (United States)

Barnes, Brenda C.

Online and blended learning platforms are being promoted within laboratory science education under the assumption that students have the necessary skills to navigate online and blended learning environments. Yet little research has examined the use of information and communication technology (ICT) among the laboratory science student population. The purpose of this correlational, survey research study was to explore factors that affect use and acceptance of ICT among laboratory science students through the theoretical lens of the unified theory of acceptance and use of technology (UTAUT) model. An electronically delivered survey drew upon current students and recent graduates (within 2 years) of accredited laboratory science training programs. During the 4 week data collection period, 168 responses were received. Results showed that the UTAUT model did not perform well within this study, explaining 25.2% of the variance in use behavior. A new model incorporating attitudes toward technology and computer anxiety as two of the top variables, a model significantly different from the original UTAUT model, was developed that explained 37.0% of the variance in use behavior. The significance of this study may affect curriculum design of laboratory science training programs wanting to incorporate more teaching techniques that use ICT-based educational delivery, and provide more options for potential students who may not currently have access to this type of training.

The Conceptions of Learning Science by Laboratory among University Science-Major Students: Qualitative and Quantitative Analyses

Science.gov (United States)

Chiu, Yu-Li; Lin, Tzung-Jin; Tsai, Chin-Chung

2016-01-01

Background: The sophistication of students' conceptions of science learning has been found to be positively related to their approaches to and outcomes for science learning. Little research has been conducted to particularly investigate students' conceptions of science learning by laboratory. Purpose: The purpose of this research, consisting of…

Dental Chairside Technique. Student's Manual.

Science.gov (United States)

Apfel, Maura; Weaver, Trudy Karlene

This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: local anesthesia; dental office emergencies; oral hygiene;…

Prevalence of TMJ Disorders among the Patients Attending the Dental Clinic of Ajman University of Science and Technology–Fujairah Campus, UAE

Directory of Open Access Journals (Sweden)

Kashef K. AlShaban

2018-01-01

Full Text Available The objective of this study was to determine the prevalence of temporomandibular joint (TMJ disorders (if any among the patients attending the dental clinic (for routine dental treatment of Ajman University of Science and Technology (AUST–Fujairah campus, UAE, and its possible causes. A sample of 100 adult patients attending the dental clinic of AUST for different types of dental treatment were collected; the routine examination of the TMJ and possible disorders such as clicking, crepitation, limitation or deviation during mouth opening, or tenderness reveals that 41% of the sample experience varying degrees of disorders in the TMJ. Radiographs were taken if needed (panoramic radiograph. The information was collected and recorded for each patient through questionnaires.

Full-participation of students with physical disabilities in science and engineering laboratories.

Science.gov (United States)

Jeannis, Hervens; Joseph, James; Goldberg, Mary; Seelman, Katherine; Schmeler, Mark; Cooper, Rory A

2018-02-01

To conduct a literature review identifying barriers and facilitators students with physical disabilities (SwD-P) may encounter in science and engineering (S&E) laboratories. Publications were identified from 1991 to 2015 in ERIC, web of science via web of knowledge, CINAHL, SCOPUS, IEEEXplore, engineering village, business source complete and PubMed databases using search terms and synonyms for accommodations, advanced manufacturing, additive manufacturing, assistive technology (AT), barriers, engineering, facilitators, instructor, laboratory, STEM education, science, students with disabilities and technology. Twenty-two of the 233 publications that met the review's inclusion criteria were examined. Barriers and facilitators were grouped based on the international classification of functioning, disability and health framework (ICF). None of the studies directly found barriers or facilitators to SwD-P in science or engineering laboratories within postsecondary environments. The literature is not clear on the issues specifically related to SwD-P. Given these findings, further research (e.g., surveys or interviews) should be conducted to identify more details to obtain more substantial information on the barriers that may prevent SwD-P from fully participating in S&E instructional laboratories. Implications for Rehabilitation Students with disabilities remain underrepresented going into STEM careers. A need exist to help uncover barriers students with disabilities encounter in STEM laboratory. Environments. Accommodations and strategies that facilitate participation in STEM laboratory environments are promising for students with disabilities.

Environmental Molecular Sciences Laboratory Operations System: Version 4.0 - system requirements specification

Energy Technology Data Exchange (ETDEWEB)

Kashporenko, D.

1996-07-01

This document is intended to provide an operations standard for the Environmental Molecular Sciences Laboratory OPerations System (EMSL OPS). It is directed toward three primary audiences: (1) Environmental Molecular Sciences Laboratory (EMSL) facility and operations personnel; (2) laboratory line managers and staff; and (3) researchers, equipment operators, and laboratory users. It is also a statement of system requirements for software developers of EMSL OPS. The need for a finely tuned, superior research environment as provided by the US Department of Energy`s (DOE) Environmental Molecular Sciences Laboratory has never been greater. The abrupt end of the Cold War and the realignment of national priorities caused major US and competing overseas laboratories to reposition themselves in a highly competitive research marketplace. For a new laboratory such as the EMSL, this means coming into existence in a rapidly changing external environment. For any major laboratory, these changes create funding uncertainties and increasing global competition along with concomitant demands for higher standards of research product quality and innovation. While more laboratories are chasing fewer funding dollars, research ideas and proposals, especially for molecular-level research in the materials and biological sciences, are burgeoning. In such an economically constrained atmosphere, reduced costs, improved productivity, and strategic research project portfolio building become essential to establish and maintain any distinct competitive advantage. For EMSL, this environment and these demands require clear operational objectives, specific goals, and a well-crafted strategy. Specific goals will evolve and change with the evolution of the nature and definition of DOE`s environmental research needs. Hence, EMSL OPS is designed to facilitate migration of these changes with ease into every pertinent job function, creating a facile {open_quotes}learning organization.{close_quotes}

Laboratory tests for assessing adaptability and stickiness of dental composites.

Science.gov (United States)

Rosentritt, Martin; Buczovsky, Sebastian; Behr, Michael; Preis, Verena

2014-09-01

Handling (stickiness, adaptability) of a dental composite does strongly influence quality and success of a dental restoration. The purpose was to develop an in vitro test, which allows for evaluating adaptability and stickiness. 15 dentists were asked for providing individual assessment (school scores 1-6) of five dental composites addressing adaptability and stickiness. Composites were applied with a dental plugger (d=1.8 mm) in a class I cavity (human tooth 17). The tooth was fixed on a force gauge for simultaneous determination of application forces with varying storage (6/25°C) and application temperatures (6/25°C). On basis of these data tensile tests were performed with a dental plugger (application force 1N/2N; v=35 mm/min) on PMMA- or human tooth plates. Composite was dosed onto the tip of the plugger and applied. Application and unplugging was performed once and unplugging forces (UF) and length of the adhesive flags (LAF) were determined at different storage (6/25°C) and application temperatures (25/37°C). Unplugging work (UW) was calculated from area of UF and LAF data. The individual assessment revealed significantly different temperature-dependent application forces between 0.58 N and 2.23 N. Adaptability was assessed between 2.1 and 2.8 school scores. Stickiness varied significantly between the materials (scores: 2-3.2). UW differed significantly between the materials with values between 3.20 N mm and 37.83 N mm. Between PMMA substrate or tooth slides and between 1N or 2N application force only small UW differences were found. The presented in vitro unplugging work allows for an in vitro estimation of the handling parameters adaptability and stickiness. Copyright © 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Content and goals of preclinical prosthodontic programs at german-language dental schools.

Science.gov (United States)

Hey, Jeremias; Stimmelmayr, Michael; Hirsch, Christian; Beuer, Florian

2014-04-01

The Association for Dental Education in Europe (ADEE) makes recommendations regarding the skills graduates of European dental schools need to achieve and advises dental schools regarding necessary changes to be made to the curriculum. In 2010 to 2011, a survey was conducted in German-language dental schools to validate the curricula and goals of preclinical prosthodontic programs with regard to laboratory work. The survey was mailed to the course instructors of the preclinical programs at 37 dental schools. Of these, 35 schools returned the completed survey, resulting in a response rate of 95%. Bent wire, wax-up exercises, metal-ceramic single crowns, fixed dental prostheses, cast metal single crowns, temporary removable dental prostheses, and full dentures were part of the dental laboratory work at most schools; however, most instructors considered laboratory work as less important, and there were few similarities among the programs in this area. According to the instructors responsible for preclinical education, honing of fine motor skills, realistic self-assessment, and the ability to work independently were the main goals of the programs. The results of this survey show that with regard to laboratory work, there were more differences than similarities among preclinical prosthodontic programs at German-language dental schools, contrary to the recommendations of the ADEE. These findings should be taken into account when program reforms are planned. © 2013 by the American College of Prosthodontists.

Enabling Data Intensive Science through Service Oriented Science: Virtual Laboratories and Science Gateways

Science.gov (United States)

Lescinsky, D. T.; Wyborn, L. A.; Evans, B. J. K.; Allen, C.; Fraser, R.; Rankine, T.

2014-12-01

We present collaborative work on a generic, modular infrastructure for virtual laboratories (VLs, similar to science gateways) that combine online access to data, scientific code, and computing resources as services that support multiple data intensive scientific computing needs across a wide range of science disciplines. We are leveraging access to 10+ PB of earth science data on Lustre filesystems at Australia's National Computational Infrastructure (NCI) Research Data Storage Infrastructure (RDSI) node, co-located with NCI's 1.2 PFlop Raijin supercomputer and a 3000 CPU core research cloud. The development, maintenance and sustainability of VLs is best accomplished through modularisation and standardisation of interfaces between components. Our approach has been to break up tightly-coupled, specialised application packages into modules, with identified best techniques and algorithms repackaged either as data services or scientific tools that are accessible across domains. The data services can be used to manipulate, visualise and transform multiple data types whilst the scientific tools can be used in concert with multiple scientific codes. We are currently designing a scalable generic infrastructure that will handle scientific code as modularised services and thereby enable the rapid/easy deployment of new codes or versions of codes. The goal is to build open source libraries/collections of scientific tools, scripts and modelling codes that can be combined in specially designed deployments. Additional services in development include: provenance, publication of results, monitoring, workflow tools, etc. The generic VL infrastructure will be hosted at NCI, but can access alternative computing infrastructures (i.e., public/private cloud, HPC).The Virtual Geophysics Laboratory (VGL) was developed as a pilot project to demonstrate the underlying technology. This base is now being redesigned and generalised to develop a Virtual Hazards Impact and Risk Laboratory

Awareness, Knowledge, and Attitude of Dental Students toward ...

African Journals Online (AJOL)

2018-05-22

May 22, 2018 ... clinical dentistry as there is an increase in the prevalence of infectious diseases among dental ... procedures for infection control in dental schools and clinics. Objectives: ... former were regularly disinfecting dental cast before sending it to the laboratory and later ..... improve their quality of life. This survey ...

Comparison of student achievement among two science laboratory types: traditional and virtual

Science.gov (United States)

Reese, Mary Celeste

Technology has changed almost every aspect of our daily lives. It is not surprising then that technology has made its way into the classroom. More and more educators are utilizing technological resources in creative ways with the intent to enhance learning, including using virtual laboratories in the sciences in place of the "traditional" science laboratories. This has generated much discussion as to the influence on student achievement when online learning replaces the face-to-face contact between instructor and student. The purpose of this study was to discern differences in achievement of two laboratory instruction types: virtual laboratory and a traditional laboratory. Results of this study indicate statistical significant differences in student achievement defined by averages on quiz scores in virtual labs compared with traditional face-to-face laboratories and traditional laboratories result in greater student learning gains than virtual labs. Lecture exam averages were also greater for students enrolled in the traditional laboratories compared to students enrolled in the virtual laboratories. To account for possible differences in ability among students, a potential extraneous variable, GPA and ACT scores were used as covariates.

Dental technician pneumoconiosis mimicking pulmonary tuberculosis: a case report.

Science.gov (United States)

Tan, Han Loong; Faisal, Mohamed; Soo, Chun Ian; Ban, Andrea Y L; Manap, Roslina Abdul; Hassan, Tidi M

2016-09-07

Dental laboratory technicians are at risk of developing occupational respiratory diseases due to exposure to various potentially toxic substances in their working environment. Since 1939, few cases of silicosis among dental technician have been reported. We illustrate a 38 year-old female, who worked in a dental laboratory for 20 years, initially treated as pulmonary tuberculosis and chronic necrotising aspergillosis without much improvement. Computed tomography guided lung biopsy and bronchoscopic transbronchial lung biopsy were performed. Lung tissue biopsies showed presence of refractile dental materials within the areas of histiocyte proliferation. The diagnosis of dental technician pneumoconiosis was obtained and our patient underwent pulmonary rehabilitation. This case highlights the importance of obtaining a detailed occupational history in tuberculosis endemic area, as pulmonary tuberculosis is a great mimicker of other respiratory diseases.

Revising laboratory work: sociological perspectives on the science classroom

Science.gov (United States)

Jobér, Anna

2017-09-01

This study uses sociological perspectives to analyse one of the core practices in science education: schoolchildren's and students' laboratory work. Applying an ethnographic approach to the laboratory work done by pupils at a Swedish compulsory school, data were generated through observations, field notes, interviews, and a questionnaire. The pupils, ages 14 and 15, were observed as they took a 5-week physics unit (specifically, mechanics). The analysis shows that the episodes of laboratory work could be filled with curiosity and exciting challenges; however, another picture emerged when sociological concepts and notions were applied to what is a very common way of working in the classroom. Laboratory work is characterised as a social activity that is expected to be organised as a group activity. This entails groups becoming, to some extent, `safe havens' for the pupils. On the other hand, this way of working in groups required pupils to subject to the groups and the peer effect, sometimes undermining their chances to learn and perform better. In addition, the practice of working in groups when doing laboratory work left some pupils and the teacher blaming themselves, even though the outcome of the learning situation was a result of a complex interplay of social processes. This article suggests a stronger emphasis on the contradictions and consequences of the science subjects, which are strongly influenced by their socio-historical legacy.

Robotic Manufacturing Science and Engineering Laboratory (RMSEL)

International Nuclear Information System (INIS)

1994-04-01

The Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Robotic Manufacturing Science and Engineering Laboratory (RMSEL) at Sandia National Laboratories/New Mexico (SNL). This facility is needed to integrate, consolidate, and enhance the robotics research and testing currently in progress at SNL. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI)

78 FR 28292 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2013-05-14

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical Science Research and Development Services Scientific Merit Review Board; Notice of Meetings; Amendment The... Joint Biomedical Laboratory Research and Development and Clinical Science Research and Development...

Sandia Laboratories technical capabilities. Auxiliary capabilities: environmental health information science

International Nuclear Information System (INIS)

1975-09-01

Sandia Laboratories is an engineering laboratory in which research, development, testing, and evaluation capabilities are integrated by program management for the generation of advanced designs. In fulfilling its primary responsibility to ERDA, Sandia Laboratories has acquired extensive research and development capabilities. The purpose of this series of documents is to catalog the many technical capabilities of the Laboratories. After the listing of capabilities, supporting information is provided in the form of highlights, which show applications. This document deals with auxiliary capabilities, in particular, environmental health and information science. (11 figures, 1 table) (RWR)

Future perspectives of resin-based dental materials.

Science.gov (United States)

Jandt, Klaus D; Sigusch, Bernd W

2009-08-01

This concise review and outlook paper gives a view of selected potential future developments in the area of resin-based biomaterials with an emphasis on dental composites. A selection of key publications (1 book, 35 scientific original publications and 1 website source) covering the areas nanotechnology, antimicrobial materials, stimuli responsive materials, self-repairing materials and materials for tissue engineering with direct or indirect relations and/or implications to resin-based dental materials is critically reviewed and discussed. Connections between these fields and their potential for resin-based dental materials are highlighted and put in perspective. The need to improve shrinkage properties and wear resistance is obvious for dental composites, and a vast number of attempts have been made to accomplish these aims. Future resin-based materials may be further improved in this respect if, for example nanotechnology is applied. Dental composites may, however, reach a completely new quality by utilizing new trends from materials science, such as introducing nanostructures, antimicrobial properties, stimuli responsive capabilities, the ability to promote tissue regeneration or repair of dental tissues if the composites were able to repair themselves. This paper shows selected potential future developments in the area of resin-based dental materials, gives basic and industrial researchers in dental materials science, and dental practitioners a glance into the potential future of these materials, and should stimulate discussion about needs and future developments in the area.

Perspectives on the Science Advisor Program at Sandia National Laboratories

International Nuclear Information System (INIS)

Bennett, P.C.; Heath, R.B.; Podlesny, A.; Channon, P.A.

1992-01-01

This paper discusses a Science Advisor Program which has been established at Sandia National Laboratories (SNL) for the long term augmentation of math and science instruction in New Mexico schools. Volunteer SNL engineers and scientists team with the faculty of participating schools to enhance the teachers' abilities to capture and hold the student's scientific imagination and develop their scientific skills. This is done primarily through providing laboratory resources, training the teachers how to use those resources, and advising how to obtain them in the future. In its first year, over 140 advisors teamed with 132 schools, for average weekly contact with 500 teachers and 10,000 students. Surveys indicate a general rise in frequency and quality of hands-on science instruction, as well as teacher and student attitudes. An expanded evaluation is planned for subsequent years

Teaching chemistry and other sciences to blind and low-vision students through hands-on learning experiences in high school science laboratories

Science.gov (United States)

Supalo, Cary Alan

2010-11-01

Students with blindness and low vision (BLV) have traditionally been underrepresented in the sciences as a result of technological and attitudinal barriers to equal access in science laboratory classrooms. The Independent Laboratory Access for the Blind (ILAB) project developed and evaluated a suite of talking and audible hardware/software tools to empower students with BLV to have multisensory, hands-on laboratory learning experiences. This dissertation focuses on the first year of ILAB tool testing in mainstream science laboratory classrooms, and comprises a detailed multi-case study of four students with BLV who were enrolled in high school science classes during 2007--08 alongside sighted students. Participants attended different schools; curricula included chemistry, AP chemistry, and AP physics. The ILAB tools were designed to provide multisensory means for students with BLV to make observations and collect data during standard laboratory lessons on an equivalent basis with their sighted peers. Various qualitative and quantitative data collection instruments were used to determine whether the hands-on experiences facilitated by the ILAB tools had led to increased involvement in laboratory-goal-directed actions, greater peer acceptance in the students' lab groups, improved attitudes toward science, and increased interest in science. Premier among the ILAB tools was the JAWS/Logger Pro software interface, which made audible all information gathered through standard Vernier laboratory probes and visually displayed through Logger Pro. ILAB tools also included a talking balance, a submersible audible light sensor, a scientific talking stopwatch, and a variety of other high-tech and low-tech devices and techniques. While results were mixed, all four participating BLV students seemed to have experienced at least some benefit, with the effect being stronger for some than for others. Not all of the data collection instruments were found to reveal improvements for all

Use of Case-Based Learning in Dental Hygiene Curricula.

Science.gov (United States)

Vaughan, Dina Agnone; DeBiase, Christina B.; Gibson-Howell, Joan C.

1998-01-01

A survey investigated the extent of use of case-based learning in 141 dental hygiene programs. A majority of responding schools use the approach, most frequently in clinical dental hygiene, community dental health, and dental science courses. Proportion of instructional time was greatest in the content areas of special needs, ethics, medical…

An Investigation into Prospective Science Teachers' Attitudes towards Laboratory Course and Self-Efficacy Beliefs in Laboratory Use

Science.gov (United States)

Aka, Elvan Ince

2016-01-01

The aim of the current study is to identify the attitudes towards the laboratory course and self-efficacy beliefs in the laboratory use of prospective teachers who are attending Gazi University Gazi Education Faculty Primary Education Science Teaching program, and to investigate the relationship between the attitudes and self-efficacy beliefs.…

78 FR 66992 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2013-11-07

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical... the panels of the Joint Biomedical Laboratory Research and Development and Clinical Science Research..., behavioral, and clinical science research. The panel meetings will be open to the public for approximately...

78 FR 22622 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2013-04-16

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical... the panels of the Joint Biomedical Laboratory Research and Development and Clinical Science Research... biomedical, behavioral and clinical science research. The panel meetings will be open to the public for...

77 FR 64598 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2012-10-22

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical...) that the panels of the Joint Biomedical Laboratory Research and Development and Clinical Science... areas of biomedical, behavioral and clinical science research. The panel meetings will be open to the...

Determination of dose rate from natural radionuclide in porcelain dental materials

International Nuclear Information System (INIS)

Nouri, A.D.; El-Zourgany, A.; Elmashat, Alia; El-Masri, Karima

2010-01-01

There are three main aims that make this study particularly important and interesting to radiometric studies. Firstly, it will provides information on the concentration composition of natural and the associated man-made radioactivity of imported dental porcelain materials to be used by most dental laboratories in Great Jamahiriya. Since these materials do not pass radiation inspection tests before their entry or use and there is a large variety of supply source of these dental materials to be used for all dental works on Libyan patients, anomalies can be identified easily. Secondly, the analysis of selective elemental abundance (U, Th, and K ) and dose rate calculations may be used to calculate effective dose rates to dental laboratory technicians and also to the patient who will be using these specific materials. This research project will provide the first results of such measurements and the corresponding average annual effective dose rates equivalent to the patients using these materials and also to the dental technician and doctors work in the various dental laboratories that make use of these materials in their daily work. A total number of 30 dental powder samples were collected from a number of dental laboratories around Tripoli area will be analyzed. In this research project, the results from this preliminary survey regarding Th, U and K elemental concentrations in a wide variety of dental materials by means of high-resolution X-ray spectrometry will be presented. Further results from these investigations concerning activity concentrations and the associated dose rates, effective dose and the committed dose due to the use of these materials are going to be calculated and compared with other published data elsewhere and recommendation of their use will be derived accordingly. (author)

Assessing and Analyzing Behavior Strategies of Instructors in College Science Laboratories.

Science.gov (United States)

Kyle, William C., Jr.; And Others

1980-01-01

Analyzed are university instructor behaviors in introductory and advanced level laboratories of botany, chemistry, geology, physics and zoology. Science Laboratory Interaction Categories--Teacher (SLIC) was used to assess 15 individual categories of teacher behaviors in the areas of questioning, giving directions, transmitting information,…

Evaluation of the effect of early clinical exposure on professional attitude of dental students of Shahid Sadoughi University of Medical Sciences in 2011-2012

Directory of Open Access Journals (Sweden)

H. Aghili

2013-06-01

Full Text Available Introduction : Learning dentistry could have many tension and anxieties like encountering to a strange clinical environment. Early clinical exposure (ECE is supposed to control these stresses. ECE program is an increasingly widespread component of educational curriculum. This study aims to determine the effect of early clinical exposure on the attitude of dental students’ towards dental education and profession. Methods: An analytic study was performed on all 72 dental students studying basic science at Faculty of Dentistry of Shahid Sadoughi University of Medical Sciences consisted of a short term course of introduction to clinical environment in academic year of 2011-2012. Every 12 students attended in an one day ECE course from 8 AM to 1 PM. Students ' attitude towards dental profession and education were assessed by a questionnaire included 25 items before and after the course .For data analysis descriptive paired-t-test was used. Results: All students completed the questionnaires. Students' attitude towards dental education and profession was evaluated. Mean score of students' attitude before and after exposure to clinical environment were 94.6 and 100.5 respectively .Significant differences were found in the students' attitude before and after the course (P=0.001 Conclusion: Based on the results of this study, we found a positive effect of early clinical exposure on attitudes of first and second year dental students. Demographic variations had an effect on the students' attitude .Therefore we suggest that early clinical exposure should be added to educational curriculum of dental students.

Environmental Sciences Laboratory dedication, February 26-27, 1979

International Nuclear Information System (INIS)

Auerbach, S.I.; Millemann, N.T.

1980-09-01

The dedication of the new Environmental Sciences Laboratory coincided with the 25th year of the establishment of the science of ecology at Oak Ridge National Laboratory. That quarter century witnessed the evolution of ecology from an obscure, backwater discipline of biology to a broadly used, everyday household word. The transition reflected broad and basic changes in our social and cultural view of the world. This was brought about as a result of the awareness developed in our society of the importance of the environment, coupled with efforts of ecologists and other environmental scientists who identified, clarified, and formulated the issues and challenges of environmental protection for both the lay public and the scientific community. In many respects, the activities in ecology at ORNL were a microcosm of the broader social scene; the particular problems of the environment associated with atomic energy needed to be defined in scientific terms and articulated in both the specific and general sense for a larger audience which was unfamiliar with the field and somewhat alien to its concepts and philosophy. The success of this effort is reflected in the existence of the new Environmental Sciences Laboratory. This dedication volume brings together the thoughts and reflections of many of these scientists whose efforts contributed in a unique and individualistic fashion not only to ORNL but also to the national identification of ecology and its importance to the achievement of our national goals. Their remarks and presentations are not only a pleasant and personally gratifying recapitulation of the past and of ORNL's contributions to ecology but also portend some of the challenges to ecology in the future

Environmental Sciences Laboratory dedication, February 26-27, 1979

Energy Technology Data Exchange (ETDEWEB)

Auerbach, S.I.; Millemann, N.T. (eds.)

1980-09-01

The dedication of the new Environmental Sciences Laboratory coincided with the 25th year of the establishment of the science of ecology at Oak Ridge National Laboratory. That quarter century witnessed the evolution of ecology from an obscure, backwater discipline of biology to a broadly used, everyday household word. The transition reflected broad and basic changes in our social and cultural view of the world. This was brought about as a result of the awareness developed in our society of the importance of the environment, coupled with efforts of ecologists and other environmental scientists who identified, clarified, and formulated the issues and challenges of environmental protection for both the lay public and the scientific community. In many respects, the activities in ecology at ORNL were a microcosm of the broader social scene; the particular problems of the environment associated with atomic energy needed to be defined in scientific terms and articulated in both the specific and general sense for a larger audience which was unfamiliar with the field and somewhat alien to its concepts and philosophy. The success of this effort is reflected in the existence of the new Environmental Sciences Laboratory. This dedication volume brings together the thoughts and reflections of many of these scientists whose efforts contributed in a unique and individualistic fashion not only to ORNL but also to the national identification of ecology and its importance to the achievement of our national goals. Their remarks and presentations are not only a pleasant and personally gratifying recapitulation of the past and of ORNL's contributions to ecology but also portend some of the challenges to ecology in the future.

Use of information and communication technology among dental students and registrars at the faculty of dental sciences, University of Lagos.

Science.gov (United States)

Butali, A; Adeyemo, W L; Akinshipo, A O; Fashina, A; Savage, K O

2011-01-01

The aim of this study was to investigate the use of information technology amongst dental students, dental nursing students and resident doctors in training at the faculty of dental Surgery University of Lagos. A structured questionnaire was distributed to 58 clinical dental students in 4 th and 5 th years of training in the 2010/2011 academic year, 36 dental nursing students and 63 resident doctors undergoing specialist training. All participants have access to the computers, 2.5% within the University and 31% at home and internet cafes and about 50% have the basic skills required. A significant difference was observed between the resident doctors and clinical dental students (P = 0.003), between resident doctors and dental nursing students (P = 0.0001) when the use of computer for study was compared. Over 95% of participants have access to internet and about 50% of them use the internet for their studies. A significant difference (P = 0.005) was observed between clinical dental students and dental nursing students that use the internet and word processing. The resident doctors used the computers for multimedia and MedLine search tools more than clinical dental students (P = 0.004) and dental nursing students (0.0006). The findings of the study show that dental students and resident doctors in training have the requisite knowledge to operate the computer for use in their study and personal activities.

How Should Students Learn in the School Science Laboratory? The Benefits of Cooperative Learning

Science.gov (United States)

Raviv, Ayala; Cohen, Sarit; Aflalo, Ester

2017-07-01

Despite the inherent potential of cooperative learning, there has been very little research into its effectiveness in middle school laboratory classes. This study focuses on an empirical comparison between cooperative learning and individual learning in the school science laboratory, evaluating the quality of learning and the students' attitudes. The research included 67 seventh-grade students who undertook four laboratory experiments on the subject of "volume measuring skills." Each student engaged both in individual and cooperative learning in the laboratory, and the students wrote individual or group reports, accordingly. A total of 133 experiment reports were evaluated, 108 of which also underwent textual analysis. The findings show that the group reports were superior, both in terms of understanding the concept of "volume" and in terms of acquiring skills for measuring volume. The students' attitudes results were statistically significant and demonstrated that they preferred cooperative learning in the laboratory. These findings demonstrate that science teachers should be encouraged to implement cooperative learning in the laboratory. This will enable them to improve the quality and efficiency of laboratory learning while using a smaller number of experimental kits. Saving these expenditures, together with the possibility to teach a larger number of students simultaneously in the laboratory, will enable greater exposure to learning in the school science laboratory.

The Allied Dental Professions: Executive Summary.

Science.gov (United States)

Fried, Jacquelyn L

2017-09-01

This executive summary for Section 5 of the "Advancing Dental Education in the 21 st Century" project addresses the current and future educational systems for dental assisting, dental hygiene, dental therapy, and dental laboratory technology. Nineteen experts prepared six background articles on the educational changes necessary for future roles and practices. The key issues addressed relate to delivery system changes, educational curricula, scopes of practice, regulatory measures, and the public's oral health. The major finding is that substantial reforms will be needed to adequately prepare allied oral health professionals for the changes anticipated in 2040. A reconsideration of current accreditation guidelines, more flexibility with scopes of practice, and an adherence to rigorous academic programs are essential elements for the future of these professions.

The Effect of a Laboratory Approach Based on Predict-Observation-Explain (POE Strategy on the Development of Students’ Science Process Skills and Views about Nature of Science

Directory of Open Access Journals (Sweden)

Kadir Bilen

2012-06-01

Full Text Available The purpose of this study was to investigate the effects of a laboratory instruction prepared based on “Predict-Observation-Explain” (POE strategy compared to a verification laboratory approach on the development of pre-service science teachers’ science skill processes and their views of nature of sceince in a general biology laboratory course. The participants of this study consisted of 122 pre-service teachers who took the General Biology Laboratory at the department of science education at Pamukkale University during the fall semester of 2007-2008 academic year. Data was collected through Science Process Skills Test (SPST and Nature of Science Questionnaire. Results indicated that there was a statistically significant difference between the verification laboratory approach and the laboratory approach based on the POE strategy on the development of students’ science process skills [F=10.41, p

Life Science-Related Physics Laboratory on Geometrical Optics

Science.gov (United States)

Edwards, T. H.; And Others

1975-01-01

Describes a laboratory experiment on geometrical optics designed for life science majors in a noncalculus introductory physics course. The thin lens equation is used by the students to calculate the focal length of the lens necessary to correct a myopic condition in an optical bench simulation of a human eye. (Author/MLH)

A MODEL FOR INTEGRATED SOFTWARE TO IMPROVE COMMUNICATION POLICY IN DENTAL TECHNICAL LABS

Directory of Open Access Journals (Sweden)

Minko M. Milev

2017-06-01

Full Text Available Introduction: Integrated marketing communications (IMC are all kinds of communications between organisations and customers, partners, other organisations and society. Aim: To develop and present an integrated software model, which can improve the effectiveness of communications in dental technical services. Material and Methods: The model of integrated software is based on recommendations of a total of 700 respondents (students of dental technology, dental physicians, dental technicians and patients of dental technical laboratories in Northeastern Bulgaria. Results and Discussion: We present the benefits of future integrated software to improve the communication policy in the dental technical laboratory that meets the needs of fast cooperation and well-built communicative network between dental physicians, dental technicians, patients and students. Conclusion: The use of integrated communications could be a powerful unified approach to improving the communication policy between all players at the market of dental technical services.

Research and Discovery Science and the Future of Dental Education and Practice.

Science.gov (United States)

Polverini, Peter J; Krebsbach, Paul H

2017-09-01

Dental graduates of 2040 will face new and complex challenges. If they are to meet these challenges, dental schools must develop a research and discovery mission that will equip graduates with the new knowledge required to function in a modern health care environment. The dental practitioner of 2040 will place greater emphasis on risk assessment, disease prevention, and health maintenance; and the emerging discipline of precision medicine and systems biology will revolutionize disease diagnosis and reveal new targeted therapies. The dental graduate of 2040 will be expected to function effectively in a collaborative, learning health care system and to understand the impact of health care policy on local, national, and global communities. Emerging scientific fields such as big data analytics, stem cell biology, tissue engineering, and advanced biomimetics will impact dental practice. Despite all the warning signs indicating how the changing scientific and heath care landscape will dramatically alter dental education and dental practice, dental schools have yet to reconsider their research and educational priorities and clinical practice objectives. Until dental schools and the practicing community come to grips with these challenges, this persistent attitude of complacency will likely be at the dental profession's peril. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

The Management of Dental Waste in Dental Offices and Clinics in Shiraz, Southern Iran

Directory of Open Access Journals (Sweden)

M Danaei

2014-01-01

Full Text Available Background: Dental waste can be hazardous to humans and the environment. Objective: To determine the current status of dental waste management in private and public dental clinics and private dental offices in Shiraz, southern Iran. Methods: This cross-sectional study was conducted at the Shiraz University of Medical Sciences from February through June 2013. A stratified random sampling method was used to study 86 private offices, 14 private clinics and 10 public clinics. Types of waste studied included mercury and amalgam, lead foil packets, sharps, infectious tissues and fluids, pharmaceuticals and domestic waste materials. Compliance with established standards by the monitored dental offices and clinics and public clinics were compared. Results: 89.1% of dental offices and clinics disposed their infectious waste with domestic waste. Only 60% of centers used standard method for sharps disposal. None of the dental centers disposed their pharmaceutical waste and x-ray fixer waste by standard methods. Less than 10% of centers recycled the amalgam and lead foil pockets waste to the manufacture. Conclusion: Government agencies should establish monitoring programs for all dental offices and clinics to identify noncompliant activity and enforce recommended regulations.

Report on Computing and Networking in the Space Science Laboratory by the SSL Computer Committee

Science.gov (United States)

Gallagher, D. L. (Editor)

1993-01-01

The Space Science Laboratory (SSL) at Marshall Space Flight Center is a multiprogram facility. Scientific research is conducted in four discipline areas: earth science and applications, solar-terrestrial physics, astrophysics, and microgravity science and applications. Representatives from each of these discipline areas participate in a Laboratory computer requirements committee, which developed this document. The purpose is to establish and discuss Laboratory objectives for computing and networking in support of science. The purpose is also to lay the foundation for a collective, multiprogram approach to providing these services. Special recognition is given to the importance of the national and international efforts of our research communities toward the development of interoperable, network-based computer applications.

Science laboratory behavior strategies of students relative to performance in and attitude to laboratory work

Science.gov (United States)

Okebukola, Peter Akinsola

The relationship between science laboratory behavior strategies of students and performance in and attitude to laboratory work was investigated in an observational study of 160 laboratory sessions involving 600 class five (eleventh grade) biology students. Zero-order correlations between the behavior strategies and outcome measures reveal a set of low to strong relationships. Transmitting information, listening and nonlesson related behaviors exhibited low correlations with practical skills and the attitude measure. The correlations between manipulating apparatus and observation with practical skills measures were found to be strong. Multiple correlation analysis revealed that the behaviors of students in the laboratories observed accounted for a large percentage of the variance in the scores on manipulative skills and a low percentage on interpretation of data, responsibility, initiative, and work habits. One significant canonical correlation emerged. The loadings on this canonical variate indicate that the practical skills measures, i.e., planning and design, manipulative skills and conduct of experiments, observation and recording of data, and attitude to laboratory work made primary contributions to the canonical relationship. Suggestions as to how students can be encouraged to go beyond cookbook-like laboratories and develop a more favorable attitude to laboratory work are made.

Science and Technology Teachers' Views about the Causes of Laboratory Accidents

Science.gov (United States)

Aydogdu, Cemil

2015-01-01

The aim of this study was to determine science and technology teachers' views about the causes of the problems encountered in laboratories. In this research, phenomenology, a qualitative research design, was used. 21 science and technology teachers who were working in elementary schools in Eskisehir during the 2010-2011 spring semester were the…

Increasing Scientific Literacy about Global Climate Change through a Laboratory-Based Feminist Science Course

Science.gov (United States)

George, Linda A.; Brenner, Johanna

2010-01-01

The authors have developed and implemented a novel general education science course that examines scientific knowledge, laboratory experimentation, and science-related public policy through the lens of feminist science studies. They argue that this approach to teaching general science education is useful for improving science literacy. Goals for…

a laboratory evaluation of the efficacy of a herbal dentifrice on dental ...

African Journals Online (AJOL)

Dr Olaleye

Maxam(R). This reduction suggested the inhibitory role the experimental herbal dentifrice Dabur(R) plays in caries development. Keywords: Dental Caries, Dentifrices, Dabur(R), Maxam(R), Caries Scores. INTRODUCTION. Dental Caries (tooth decay) is a disease of insidious onset and its rate of progress is slow in children ...

History of dental hygiene research.

Science.gov (United States)

Bowen, Denise M

2013-01-01

Dental hygiene is defined as the science and practice of the recognition, treatment and prevention of oral diseases. The history of dental hygiene research is considered in the context of the development of the discipline and an emerging infrastructure. Research-related events supporting the growth and maturation of the profession are considered from the early years to the most recent. The benefits of preventive oral health services provided by dental hygienists have been supported by research, and the practice of dental hygiene has expanded as a result of research findings since its inception 100 years ago. Dental hygienists' engagement in research, however, did not begin until the 1960s as research associates or administrators, primarily with dental researchers as primary investigators. The Journal of Dental Hygiene (JDH) has provided information for dental hygiene practice since 1927, and has been the primary venue for dissemination of dental hygiene research since 1945. Graduate education in dental hygiene at the master's degree level and the work of early dental hygiene researchers led to the first conference on dental hygiene research in 1982. Over 30 years later, dental hygiene has established a meta-paradigm and defined conceptual models, built an initial infrastructure to support research endeavors and contributed much to the development of dental hygiene as a unique discipline. A doctoral degree in the discipline, continued theory-based research, initiatives to foster collaborations between dental hygiene and other researchers and enhanced capabilities to attract funding to support large scale studies are goals that must be attained through the efforts of future researchers to address the needs for additional development in the discipline of dental hygiene. Dental hygiene research supports the growing discipline and its value to society.

Laboratory evaluation of anti-biofilm agents for use in dental unit waterlines.

Science.gov (United States)

Meiller, T F; Kelley, J I; Baqui, A A; DePaola, L G

2001-01-01

Dental unit waterline biofilm has been recognized as a potential point of contamination and a risk to patients with any level of immunocompromise. Biofilm in dental unit waterlines, once established, has proven formidable to efforts in disinfection/disruption. This project compared standardized evaluation techniques by assessing the efficacy of a variety of agents that have been reported or suggested as useful in surface disinfection and/or antiseptic protocols. The zones of inhibition, minimum inhibitory/bactericidal concentrations and use-dilution with stainless steel carrier replicates tests assessed the disinfection of planktonic organisms using standardized microbial testing procedures. The disruption and/or disinfection of planktonic and biofilm organisms within naturally occurring dental unit waterlines were evaluated by culture and scanning electron microscopy. The six commercially available antimicrobial agents used to assess the techniques were bleach (sodium hypochlorite), Cavicide, glutaraldehyde, Listerine Antiseptic, Peridex and Sterilex Ultra. Comparisons between the results for each technique evaluated were determined for each product. All six agents demonstrated antimicrobial efficacy at the working concentrations designated by the manufacturers. Biofilm matrix elimination evaluated by scanning electron microscopy found virtually 0% elimination by glutaraldehyde to an estimated 90% elimination by Sterilex Ultra and bleach after one treatment. Treatment with Cavicide, Listerine Antiseptic and Peridex resulted in negligible elimination of the biofilm matrix. For comparability, the use of standardized testing techniques to evaluate a disinfection agent's efficacy against dental unit waterline contamination is essential. This project demonstrates a model system for evaluating disinfection agents potentially useful in the management of dental unit waterline biofilm, and should assist in educating the dental clinician in the appraisal of existing and

Space Science at Los Alamos National Laboratory

Science.gov (United States)

Smith, Karl

2017-09-01

The Space Science and Applications group (ISR-1) in the Intelligence and Space Research (ISR) division at the Los Alamos National Laboratory lead a number of space science missions for civilian and defense-related programs. In support of these missions the group develops sensors capable of detecting nuclear emissions and measuring radiations in space including γ-ray, X-ray, charged-particle, and neutron detection. The group is involved in a number of stages of the lifetime of these sensors including mission concept and design, simulation and modeling, calibration, and data analysis. These missions support monitoring of the atmosphere and near-Earth space environment for nuclear detonations as well as monitoring of the local space environment including space-weather type events. Expertise in this area has been established over a long history of involvement with cutting-edge projects continuing back to the first space based monitoring mission Project Vela. The group's interests cut across a large range of topics including non-proliferation, space situational awareness, nuclear physics, material science, space physics, astrophysics, and planetary physics.

First-year dental students' motivation and attitudes for choosing the dental profession.

Science.gov (United States)

Avramova, Nadya; Yaneva, Krassimira; Bonev, Boyko

2014-01-01

To determine first-year dental students' current motivation and attitudes for choosing the dental profession at the Faculty of Dental Medicine, Medical University - Sofia, Bulgaria. An anonymous questionnaire, consisting of 12 questions about students' socio-demographic profile and their motivation for choosing dentistry, was administered to 119 first-year dental students at the Faculty of Dental Medicine of the Medical University of Sofia. The study was conducted at the beginning of the 2012-2013 academic year. The data was processed and analyzed with the following software: Microsoft Windows Server 2008 R2; Microsoft SQL Server 2008; Internet Information Server 7.5.; Microsoft SharePoint Server 2010. The majority of the students (73%) were self-motivated for choosing dentistry as a career; 61% of them did not have relatives in the medical profession; 43% chose dental medicine because it is a prestigious, humane and noble profession; 50% - for financial security; 59% - because of the independence that it provides. There were no significant differences in the motivation between males and females. Independence, financial security and 'prestige' were the predominant motivating factors in this group of first-year dental students. Determining the reasons for choosing dentistry has important implications for the selection and training of students as well as for their future job satisfaction. Copyright © 2014 by Academy of Sciences and Arts of Bosnia and Herzegovina.

Administrative trends in U.S. dental schools.

Science.gov (United States)

Fu, Martin M; Rodriguez, Angel; Chen, Rebecca Y; Fu, Earl; Liao, Shu-Yi; Karimbux, Nadeem Y

2014-11-01

The aims of this study were to analyze the administrative trends in U.S. dental schools at the beginning and end of a thirteen-year period and to identify the predictive factors for those changes. Administrative trends were measured by the difference in the number of major administrative positions for 1997 and 2010 reported in American Dental Education Association (ADEA) and American Dental Association (ADA) publications. Secondary measures (program length, student enrollment, and tuition) were also gathered. The mean numbers of administrative positions per school significantly increased over the study period, while the mean number of clinical science departments per school significantly decreased. The change in the number of directors was positively correlated with the change in student enrollment, but inversely correlated with the change in number of vice/associate/assistant deans. The change in the number of clinical science departments was positively correlated with changes in student enrollment and out-of-state tuition, but inversely correlated with the change in in-state tuition. The number of all departments per U.S. dental school significantly decreased in this period. The schools that had consolidation of clinical science departments were less likely to have increases in student enrollment and out-of-state tuition, but more likely to have increases in in-state tuition.

The quality of impressions for crowns and bridges: an assessment of the work received at three commercial dental laboratories. assessing the quality of the impressions of prepared teeth.

Science.gov (United States)

Storey, D; Coward, T J

2013-06-01

The literature is limited in studies directly assessing the quality of impressions for crowns and bridges in the UK. The aim of the study was to assess the quality of impressions for conventional crown and bridgework received by commercial dental laboratories. Three dental laboratories were visited over a 3-month period. All impressions for conventional crowns and bridges that arrived on the days of the visits were examined prior to any laboratory processing. A total of 206 impression cases were examined and assessed against criteria laid out in a custom-designed assessment form. Defects were commonly found in the recording of prepared teeth. Overall, 44.2% of impression cases were unsatisfactory. NHS impressions were more than twice as likely to be unsatisfactory compared to private impressions. If the results of this survey are typical then the general quality of impressions for fixed crown and bridgework is unacceptable. This is particularly true for work completed under the NHS contract.

Marine Sciences Laboratory Radionuclide Air Emissions Report for Calendar Year 2015

Energy Technology Data Exchange (ETDEWEB)

Snyder, Sandra F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Barnett, J. Matthew [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-05-05

The U.S. Department of Energy Office of Science (DOE-SC) Pacific Northwest Site Office has oversight and stewardship duties associated with the Pacific Northwest National Laboratory Marine Sciences Laboratory located on Battelle Land – Sequim. This report is prepared to document compliance with the 40 CFR Part 61, Subpart H, “National Emission Standards for Emissions of Radionuclides Other than Radon from Department of Energy Facilities” and Washington Administrative Code . The EDE to the MSL MEI due to routine operations in 2015 was 1.1E-04 mrem (1.1E-06 mSv). No non-routine emissions occurred in 2015. The MSL is in compliance with the federal and state 10 mrem/yr standard.

Building Transnational Bodies: Norway and the International Development of Laboratory Animal Science, ca. 1956–1980

Science.gov (United States)

Druglitrø, Tone; Kirk, Robert G. W.

2015-01-01

Argument This article adopts a historical perspective to examine the development of Laboratory Animal Science and Medicine, an auxiliary field which formed to facilitate the work of the biomedical sciences by systematically improving laboratory animal production, provision, and maintenance in the post Second World War period. We investigate how Laboratory Animal Science and Medicine co-developed at the local level (responding to national needs and concerns) yet was simultaneously transnational in orientation (responding to the scientific need that knowledge, practices, objects and animals circulate freely). Adapting the work of Tsing (2004), we argue that national differences provided the creative “friction” that helped drive the formation of Laboratory Animal Science and Medicine as a transnational endeavor. Our analysis engages with the themes of this special issue by focusing on the development of Laboratory Animal Science and Medicine in Norway, which both informed wider transnational developments and was formed by them. We show that Laboratory Animal Science and Medicine can only be properly understood from a spatial perspective; whilst it developed and was structured through national “centers,” its orientation was transnational necessitating international networks through which knowledge, practice, technologies, and animals circulated. More and better laboratory animals are today required than ever before, and this demand will continue to rise if it is to keep pace with the quickening tempo of biological and veterinary research. The provision of this living experimental material is no longer a local problem; local, that is, to the research institute. It has become a national concern, and, in some of its aspects . . . even international. (William Lane-Petter 1957, 240) PMID:24941794

Disinfection of dental impressions - compliance to accepted standards.

Science.gov (United States)

Almortadi, N; Chadwick, R G

2010-12-18

The responsibility of ensuring impressions have been cleaned and disinfected before dispatch to the dental laboratory lies solely with the dentist. Uncertainty of impression disinfection risks both the health of the receiving dental technician and potential repeat disinfection of an already disinfected impression with detrimental consequences for its dimensions. To ascertain, from the perspectives of dentists and dental technicians, current impression decontamination and disinfection practices with, in the case of the technicians, an estimate of the relative prevalence of contaminated voids within apparently disinfected impressions. Anonymous postal questionnaire. Dentist (n = 200) and dental technician (n = 200) potential participants, selected at random from the registers held by the General Dental Council, were invited to complete an anonymous postal questionnaire that sought to establish current practices and perceived effectiveness of impression disinfection. Questionnaire return rates of 42.1% and 31.2% were recorded for dentists and dental technicians respectively. A wide range of solutions, at different dilutions of the same product, was used by the dentists to disinfect dental impressions. 37.2% rinsed the impressions with water, and 2.6% always brushed debris away, before disinfection. 24.7% of dentists did not inform the laboratory of disinfection. Irrespective of the disinfection status of the received impressions, 50% of the responding dental technicians disinfected all impressions. 95% of them had received blood-contaminated impressions. 15% had encountered blood-filled voids upon trimming back the peripheries of impressions. 64.7% were confident that the impressions received by them had been disinfected by the dentists. Compliance with good practice is less than ideal and education in impression disinfection for both dentists and dental technicians is required to address this.

Developing a Collaborative Agenda for Humanities and Social Scientific Research on Laboratory Animal Science and Welfare.

Science.gov (United States)

Davies, Gail F; Greenhough, Beth J; Hobson-West, Pru; Kirk, Robert G W; Applebee, Ken; Bellingan, Laura C; Berdoy, Manuel; Buller, Henry; Cassaday, Helen J; Davies, Keith; Diefenbacher, Daniela; Druglitrø, Tone; Escobar, Maria Paula; Friese, Carrie; Herrmann, Kathrin; Hinterberger, Amy; Jarrett, Wendy J; Jayne, Kimberley; Johnson, Adam M; Johnson, Elizabeth R; Konold, Timm; Leach, Matthew C; Leonelli, Sabina; Lewis, David I; Lilley, Elliot J; Longridge, Emma R; McLeod, Carmen M; Miele, Mara; Nelson, Nicole C; Ormandy, Elisabeth H; Pallett, Helen; Poort, Lonneke; Pound, Pandora; Ramsden, Edmund; Roe, Emma; Scalway, Helen; Schrader, Astrid; Scotton, Chris J; Scudamore, Cheryl L; Smith, Jane A; Whitfield, Lucy; Wolfensohn, Sarah

2016-01-01

Improving laboratory animal science and welfare requires both new scientific research and insights from research in the humanities and social sciences. Whilst scientific research provides evidence to replace, reduce and refine procedures involving laboratory animals (the '3Rs'), work in the humanities and social sciences can help understand the social, economic and cultural processes that enhance or impede humane ways of knowing and working with laboratory animals. However, communication across these disciplinary perspectives is currently limited, and they design research programmes, generate results, engage users, and seek to influence policy in different ways. To facilitate dialogue and future research at this interface, we convened an interdisciplinary group of 45 life scientists, social scientists, humanities scholars, non-governmental organisations and policy-makers to generate a collaborative research agenda. This drew on methods employed by other agenda-setting exercises in science policy, using a collaborative and deliberative approach for the identification of research priorities. Participants were recruited from across the community, invited to submit research questions and vote on their priorities. They then met at an interactive workshop in the UK, discussed all 136 questions submitted, and collectively defined the 30 most important issues for the group. The output is a collaborative future agenda for research in the humanities and social sciences on laboratory animal science and welfare. The questions indicate a demand for new research in the humanities and social sciences to inform emerging discussions and priorities on the governance and practice of laboratory animal research, including on issues around: international harmonisation, openness and public engagement, 'cultures of care', harm-benefit analysis and the future of the 3Rs. The process outlined below underlines the value of interdisciplinary exchange for improving communication across

Developing a Collaborative Agenda for Humanities and Social Scientific Research on Laboratory Animal Science and Welfare

Science.gov (United States)

Davies, Gail F.; Greenhough, Beth J; Hobson-West, Pru; Kirk, Robert G. W.; Applebee, Ken; Bellingan, Laura C.; Berdoy, Manuel; Buller, Henry; Cassaday, Helen J.; Davies, Keith; Diefenbacher, Daniela; Druglitrø, Tone; Escobar, Maria Paula; Friese, Carrie; Herrmann, Kathrin; Hinterberger, Amy; Jarrett, Wendy J.; Jayne, Kimberley; Johnson, Adam M.; Johnson, Elizabeth R.; Konold, Timm; Leach, Matthew C.; Leonelli, Sabina; Lewis, David I.; Lilley, Elliot J.; Longridge, Emma R.; McLeod, Carmen M.; Miele, Mara; Nelson, Nicole C.; Ormandy, Elisabeth H.; Pallett, Helen; Poort, Lonneke; Pound, Pandora; Ramsden, Edmund; Roe, Emma; Scalway, Helen; Schrader, Astrid; Scotton, Chris J.; Scudamore, Cheryl L.; Smith, Jane A.; Whitfield, Lucy; Wolfensohn, Sarah

2016-01-01

Improving laboratory animal science and welfare requires both new scientific research and insights from research in the humanities and social sciences. Whilst scientific research provides evidence to replace, reduce and refine procedures involving laboratory animals (the ‘3Rs’), work in the humanities and social sciences can help understand the social, economic and cultural processes that enhance or impede humane ways of knowing and working with laboratory animals. However, communication across these disciplinary perspectives is currently limited, and they design research programmes, generate results, engage users, and seek to influence policy in different ways. To facilitate dialogue and future research at this interface, we convened an interdisciplinary group of 45 life scientists, social scientists, humanities scholars, non-governmental organisations and policy-makers to generate a collaborative research agenda. This drew on methods employed by other agenda-setting exercises in science policy, using a collaborative and deliberative approach for the identification of research priorities. Participants were recruited from across the community, invited to submit research questions and vote on their priorities. They then met at an interactive workshop in the UK, discussed all 136 questions submitted, and collectively defined the 30 most important issues for the group. The output is a collaborative future agenda for research in the humanities and social sciences on laboratory animal science and welfare. The questions indicate a demand for new research in the humanities and social sciences to inform emerging discussions and priorities on the governance and practice of laboratory animal research, including on issues around: international harmonisation, openness and public engagement, ‘cultures of care’, harm-benefit analysis and the future of the 3Rs. The process outlined below underlines the value of interdisciplinary exchange for improving communication across

Developing a Collaborative Agenda for Humanities and Social Scientific Research on Laboratory Animal Science and Welfare.

Directory of Open Access Journals (Sweden)

Gail F Davies

Full Text Available Improving laboratory animal science and welfare requires both new scientific research and insights from research in the humanities and social sciences. Whilst scientific research provides evidence to replace, reduce and refine procedures involving laboratory animals (the '3Rs', work in the humanities and social sciences can help understand the social, economic and cultural processes that enhance or impede humane ways of knowing and working with laboratory animals. However, communication across these disciplinary perspectives is currently limited, and they design research programmes, generate results, engage users, and seek to influence policy in different ways. To facilitate dialogue and future research at this interface, we convened an interdisciplinary group of 45 life scientists, social scientists, humanities scholars, non-governmental organisations and policy-makers to generate a collaborative research agenda. This drew on methods employed by other agenda-setting exercises in science policy, using a collaborative and deliberative approach for the identification of research priorities. Participants were recruited from across the community, invited to submit research questions and vote on their priorities. They then met at an interactive workshop in the UK, discussed all 136 questions submitted, and collectively defined the 30 most important issues for the group. The output is a collaborative future agenda for research in the humanities and social sciences on laboratory animal science and welfare. The questions indicate a demand for new research in the humanities and social sciences to inform emerging discussions and priorities on the governance and practice of laboratory animal research, including on issues around: international harmonisation, openness and public engagement, 'cultures of care', harm-benefit analysis and the future of the 3Rs. The process outlined below underlines the value of interdisciplinary exchange for improving

The Environmental and Molecular Sciences Laboratory project -- Continuous evolution in leadership

International Nuclear Information System (INIS)

Knutson, D.E.; McClusky, J.K.

1994-10-01

The Environmental and Molecular Sciences Laboratory (EMSL) construction project at Pacific Northwest Laboratory (PNL) in Richland, Washington, is a $230M Major Systems Acquisition for the US Department of Energy (DOE). The completed laboratory will be a national user facility that provides unparalleled capabilities for scientists involved in environmental molecular science research. This project, approved for construction by the Secretary of Energy in October 1993, is underway. The United States is embarking on an environmental cleanup effort that dwarfs previous scientific enterprise. Using current best available technology, the projected costs of cleaning up the tens of thousands of toxic waste sites, including DOE sites, is estimated to exceed one trillion dollars. The present state of scientific knowledge regarding the effects of exogenous chemicals on human biology is very limited. Long term environmental research at the molecular level is needed to resolve the concerns, and form the building blocks for a structure of cost effective process improvement and regulatory reform

The Environmental and Molecular Sciences Laboratory project -- Continuous evolution in leadership

Energy Technology Data Exchange (ETDEWEB)

Knutson, D.E.; McClusky, J.K.

1994-10-01

The Environmental and Molecular Sciences Laboratory (EMSL) construction project at Pacific Northwest Laboratory (PNL) in Richland, Washington, is a $230M Major Systems Acquisition for the US Department of Energy (DOE). The completed laboratory will be a national user facility that provides unparalleled capabilities for scientists involved in environmental molecular science research. This project, approved for construction by the Secretary of Energy in October 1993, is underway. The United States is embarking on an environmental cleanup effort that dwarfs previous scientific enterprise. Using current best available technology, the projected costs of cleaning up the tens of thousands of toxic waste sites, including DOE sites, is estimated to exceed one trillion dollars. The present state of scientific knowledge regarding the effects of exogenous chemicals on human biology is very limited. Long term environmental research at the molecular level is needed to resolve the concerns, and form the building blocks for a structure of cost effective process improvement and regulatory reform.

Life sciences laboratory breadboard simulations for shuttle

Science.gov (United States)

Taketa, S. T.; Simmonds, R. C.; Callahan, P. X.

1975-01-01

Breadboard simulations of life sciences laboratory concepts for conducting bioresearch in space were undertaken as part of the concept verification testing program. Breadboard simulations were conducted to test concepts of and scope problems associated with bioresearch support equipment and facility requirements and their operational integration for conducting manned research in earth orbital missions. It emphasized requirements, functions, and procedures for candidate research on crew members (simulated) and subhuman primates and on typical radioisotope studies in rats, a rooster, and plants.

The Role of the National Laboratory in Improving Secondary Science Education

Energy Technology Data Exchange (ETDEWEB)

White,K.; Morris, M.; Stegman, M.

2008-10-20

While the role of science, technology, engineering, and mathematics (STEM) teachers in our education system is obvious, their role in our economic and national security system is less so. Our nation relies upon innovation and creativity applied in a way that generates new technologies for industry, health care, and the protection of our national assets and citizens. Often, it is our science teachers who generate the excitement that leads students to pursue science careers. While academia provides these teachers with the tools to educate, the rigors of a science and technology curriculum, coupled with the requisite teaching courses, often limit teacher exposure to an authentic research environment. As the single largest funding agency for the physical sciences, the US Department of Energy's (DOE) Office of Science plays an important role in filling this void. For STEM teachers, the DOE Academies Creating Teacher Scientists program (ACTS) bridges the worlds of research and education. The ACTS program at Brookhaven National Laboratory (BNL), one of several across the country, exemplifies the value of this program for participating teachers. Outcomes of the work at BNL as evidenced by the balance of this report, include the following: (1) Teachers have developed long-term relationships with the Laboratory through participation in ongoing research, and this experience has both built enthusiasm for and enriched the content knowledge of the participants. (2) Teachers have modified the way they teach and are more likely to engage students in authentic research and include more inquiry-based activities. (3) Teachers have reported their students are more interested in becoming involved in science through classes, extra-curricular clubs, and community involvement. (4) Teachers have established leadership roles within their peer groups, both in their own districts and in the broader teaching community. National laboratories are making an important contribution to the

U.S. dental students' attitudes toward research and science: impact of research experience.

Science.gov (United States)

Holman, Shaina Devi; Wietecha, Mateusz S; Gullard, Angela; Peterson, Jon M B

2014-03-01

This study aimed to provide a first nationwide assessment of dental students' attitudes toward the importance of research and its integration into the dental curriculum. For this purpose, the American Association for Dental Research National Student Research Group developed an online survey that was distributed to 89 percent of U.S. dental students in May 2012. The survey consisted of twenty-one Likert-type items divided into three groups: importance of research in dentistry, barriers to research involvement, and exposure to research in the dental curriculum. There were 733 responses (3.9 percent response rate), including students in all stages of education representing fifty-eight out of sixty-one dental schools. Age and race/ethnic distributions corresponded with U.S. dental school enrollees. Results showed that 63 percent of respondents had conducted research before matriculation, and of the 34 percent that participated in research during dental school, only 27 percent were newcomers. Respondents strongly agreed that scientific research enabled their progress in dentistry. Inadequate time in the curriculum was an obstacle they perceived to research involvement during dental school. Respondents agreed that dental curricula emphasize evidence-based practices but may be inadequately teaching biostatistics and research methodologies. Students with research experience tended to have stronger positive opinions about the importance of research in dental education. Efforts to foster research in schools have been well received by students, but several issues remain for enriching dental education through greater involvement of students in research.

Discourse in science communities: Issues of language, authority, and gender in a life sciences laboratory

Science.gov (United States)

Conefrey, Theresa Catherine

Government-sponsored and private research initiatives continue to document the underrepresentation of women in the sciences. Despite policy initiatives, women's attrition rates each stage of their scientific careers remain higher than those of their male colleagues. In order to improve retention rates more information is needed about why many drop out or do not succeed as well as they could. While broad sociological studies and statistical surveys offer a valuable overview of institutional practices, in-depth qualitative analyses are needed to complement these large-scale studies. This present study goes behind statistical generalizations about the situation of women in science to explore the actual experience of scientific socialization and professionalization. Beginning with one reason often cited by women who have dropped out of science: "a bad lab experience," I explore through detailed observation in a naturalistic setting what this phrase might actually mean. Using ethnographic and discourse analytic methods, I present a detailed analysis of the discourse patterns in a life sciences laboratory group at a large research university. I show how language accomplishes the work of indexing and constituting social constraints, of maintaining or undermining the hierarchical power dynamics of the laboratory, of shaping members' presentation of self, and of modeling social and professional skills required to "do science." Despite the widespread conviction among scientists that "the mind has no sex," my study details how gender marks many routine interactions in the lab, including an emphasis on competition, a reinforcement of sex-role stereotypes, and a conversational style that is in several respects more compatible with men's than women's forms of talk.

Dental and Dental Hygiene Intraprofessional Education: A Pilot Program and Assessment of Students' and Patients' Satisfaction.

Science.gov (United States)

Jones, Vickie E; Karydis, Anastasios; Hottel, Timothy L

2017-10-01

Interprofessional and intraprofessional education (when students from two or more professions or within the same profession, respectively, learn about, from, and/or with each other) is crucial for effective interdisciplinary collaboration. The aims of this study were to assess the effectiveness of a clinical intraprofessional education program for dental and dental hygiene students, based on students' expectations and satisfaction with the program and patients' satisfaction with the team-based care. The pilot program was developed at the University of Tennessee Health Science Center College of Dentistry, where dental hygiene students were paired randomly with dental students scheduled for prophylaxis, scaling and root planing, or periodontal maintenance. Surveys with questions about the students' expectations and satisfaction were distributed to 89 senior dental students and 27 senior dental hygiene students before and after team-based procedures. Another survey was distributed to 17 patients asking about their satisfaction with the team-based care. All 27 dental hygiene students (100% response rate), 51 dental students (57.3% response rate), and all 17 patients (100% response rate) participated in the surveys. The results showed that both the dental and dental hygiene students had high expectations and were overall satisfied with the intraprofessional education. The students' expectations and perceived educational gap (difference between expectations and satisfaction) differed for the dental and dental hygiene students (ppatients were overwhelmingly satisfied with the team-based care. These results suggest that this intraprofessional practice model provided an effective educational experience for both dental and dental hygiene students and patients. The differences between the dental hygiene and dental students' expectations will help in the design of more effective training that promotes intraprofessional and interprofessional teamwork.

Development, Evaluation and Use of a Student Experience Survey in Undergraduate Science Laboratories: The Advancing Science by Enhancing Learning in the Laboratory Student Laboratory Learning Experience Survey

Science.gov (United States)

Barrie, Simon C.; Bucat, Robert B.; Buntine, Mark A.; Burke da Silva, Karen; Crisp, Geoffrey T.; George, Adrian V.; Jamie, Ian M.; Kable, Scott H.; Lim, Kieran F.; Pyke, Simon M.; Read, Justin R.; Sharma, Manjula D.; Yeung, Alexandra

2015-07-01

Student experience surveys have become increasingly popular to probe various aspects of processes and outcomes in higher education, such as measuring student perceptions of the learning environment and identifying aspects that could be improved. This paper reports on a particular survey for evaluating individual experiments that has been developed over some 15 years as part of a large national Australian study pertaining to the area of undergraduate laboratories-Advancing Science by Enhancing Learning in the Laboratory. This paper reports on the development of the survey instrument and the evaluation of the survey using student responses to experiments from different institutions in Australia, New Zealand and the USA. A total of 3153 student responses have been analysed using factor analysis. Three factors, motivation, assessment and resources, have been identified as contributing to improved student attitudes to laboratory activities. A central focus of the survey is to provide feedback to practitioners to iteratively improve experiments. Implications for practitioners and researchers are also discussed.

A Dual Case Study: Students' Perceptions, Self-Efficacy and Understanding of the Nature of Science in Varied Introductory Biology Laboratories

Science.gov (United States)

Quigley, Dena Beth Boans

Since World War II, science education has been at the forefront of curricular reforms. Although the philosophical approach to science education has changed numerous times, the importance of the laboratory has not waned. A laboratory is meant to allow students to encounter scientific concepts in a very real, hands-on way so that they are able to either recreate experiments that have given rise to scientific theories or to use science to understand a new idea. As the interactive portion of science courses, the laboratory should not only reinforce conceptual ideas, but help students to understand the process of science and interest them in learning more about science. However, most laboratories have fallen into a safe pattern having teachers and students follow a scientific recipe, removing the understanding of and interest in science for many participants. In this study, two non-traditional laboratories are evaluated and compared with a traditional laboratory in an effort to measure student satisfaction, self-efficacy, attitudes towards science, and finally their epistemology of the nature of science (NOS). Students in all populations were administered a survey at the beginning and the end of their spring 2016 laboratory, and the survey was a mixture of qualitative questions and quantitative instruments. Overall, students who participated in one of the non-traditional labs rated their satisfaction higher and used affirming supportive statements. They also had significant increases in self-efficacy from pre to post, while the students in the traditional laboratory had a significant decrease. The students in the traditional laboratory had significant changed in attitudes towards science, as did the students in one of the non-traditional laboratories. All students lacked a firm grasp of the tenets of NOS, although one laboratory that includes explicit discussions of NOS saw improvement in at least on tenet. Data for two non-major biology laboratory populations was

A Comparison of Students' Achievement and Attitude Changes Resulting From a Laboratory and Non-Laboratory Approach to General Education Physical Science Courses.

Science.gov (United States)

Gunsch, Leonhardt Maurice

Student achievement and attitude changes resulting from two different approaches to teaching of physical science were studied among 94 non-science freshmen enrolled at Valley City State College during the 1970-71 winter quarter. Thirty-four students were taught the laboratory-oriented Physical Science for Nonscience Students (PSNS) Project course…

The Effect of Using 3E, 5E Learning Cycle in General Chemistry Laboratory to Prospective Scinence Teachers’ Attitude and Perceptions to the Science, Chemistry and Laboratory

OpenAIRE

Toprak, Fatih; Çelikler, Dilek

2013-01-01

The study aimed to investigate the emerging changes in prospective science teachers" attitudes and perceptions towards science, chemistry and laboratory resulting from the implementation of 3E. 5E learning cycles and traditional instruction in laboratory environment in which learning is achieved by doing and experiencing. The study included 74 first grade prospective science teachers from Ondokuz Mayıs University at the Department of Science Education. In the study, quasi-experimental pr...

Dental Anomalies: An Update

Directory of Open Access Journals (Sweden)

Fatemeh Jahanimoghadam

2016-01-01

Full Text Available Dental anomalies are usual congenital malformation that can happen either as isolated findings or as a part of a syndrome. Developmental anomalies influencing the morphology exists in both deciduous and permanent dentition and shows different forms such as gemination, fusion, concrescence, dilaceration, dens evaginatus (DE, enamel pearls, taurodontism or peg-shaped laterals. All These anomalies have clinical significance concerning aesthetics, malocclusion and more necessary preparing of the development of dental decays and oral diseases. Through a search in PubMed, Google, Scopus and Medline, a total of eighty original research papers during 1928-2016 were found with the keywords such as dental anomaly, syndrome, tooth and hypodontia. One hundred review titles were identified, eighty reviews were retrieved that were finally included as being relevant and of sufficient quality. In this review, dental anomalies including gemination, fusion, concrescence, dilaceration, dens invaginatus, DE, taurodontism, enamel pearls, fluorosis, peg-shaped laterals, dentinal dysplasia, regional odontodysplasia and hypodontia are discussed. Diagnosing dental abnormality needs a thorough evaluation of the patient, involving a medical, dental, familial and clinical history. Clinical examination and radiographic evaluation and in some of the cases, specific laboratory tests are also needed. Developmental dental anomalies require careful examination and treatment planning. Where one anomaly is present, clinicians should suspect that other anomalies may also be present. Moreover, careful clinical and radiographical examination is required. Furthermore, more complex cases need multidisciplinary planning and treatment.

Clinical medical sciences for undergraduate dental students in the United Kingdom and Ireland - a curriculum.

LENUS (Irish Health Repository)

Mighell, A J

2011-08-01

The technical aspects of dentistry need to be practised with insight into the spectrum of human diseases and illnesses and how these impact upon individuals and society. Application of this insight is critical to decision-making related to the planning and delivery of safe and appropriate patient-centred healthcare tailored to the needs of the individual. Provision for the necessary training is included in undergraduate programmes, but in the United Kingdom and Ireland there is considerable variation between centres without common outcomes. In 2009 representatives from 17 undergraduate dental schools in the United Kingdom and Ireland agreed to move towards a common, shared approach to meet their own immediate needs and that might also be of value to others in keeping with the Bologna Process. To provide a clear identity the term \\'Clinical Medical Sciences in Dentistry\\' was agreed in preference to other names such as \\'Human Disease\\' or \\'Medicine and Surgery\\'. The group was challenged to define consensus outcomes. Contemporary dental education documents informed, but did not drive the process. The consensus curriculum for undergraduate Clinical Medical Sciences in Dentistry teaching agreed by the participating centres is reported. Many of the issues are generic and it includes elements that are likely to be applicable to others. This document will act as a focus for a more unified approach to the outcomes required by graduates of the participating centres and act as a catalyst for future developments that ultimately aim to enhance the quality of patient care.

Chemical Differentiation of Osseous, Dental, and Non-skeletal Materials in Forensic Anthropology using Elemental Analysis.

Science.gov (United States)

Zimmerman, Heather A; Meizel-Lambert, Cayli J; Schultz, John J; Sigman, Michael E

2015-03-01

Forensic anthropologists are generally able to identify skeletal materials (bone and tooth) using gross anatomical features; however, highly fragmented or taphonomically altered materials may be problematic to identify. Several chemical analysis techniques have been shown to be reliable laboratory methods that can be used to determine if questionable fragments are osseous, dental, or non-skeletal in nature. The purpose of this review is to provide a detailed background of chemical analysis techniques focusing on elemental compositions that have been assessed for use in differentiating osseous, dental, and non-skeletal materials. More recently, chemical analysis studies have also focused on using the elemental composition of osseous/dental materials to evaluate species and provide individual discrimination, but have generally been successful only in small, closed groups, limiting their use forensically. Despite significant advances incorporating a variety of instruments, including handheld devices, further research is necessary to address issues in standardization, error rates, and sample size/diversity. Copyright © 2014 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

Dental anxiety among adult patients and its correlation with self-assessed dental status and treatment needs

International Nuclear Information System (INIS)

Syed, S.; Bilal, S.; Dawani, N.; Rizvi, K

2013-01-01

Objective: To evaluate the dental anxiety levels and to assess its correlation with self-assessed dental status and treatment needs of patients. Methods: The study was conducted at the Out Patient Department of Dr. Ishrat-ul-Ebad Khan Institute of Oral Health Sciences, Karachi. Using non-probability quota sampling, the study included the first 32 patients between 18 and 35 years of age, visiting the facility. Over a period of one month (22 working days) 704 patients comprised the study population. They were interviewed using a structured questionnaire to self-assess their dental anxiety levels, oral health status and treatment needs. The data was analysed using SPSS 17.0 with descriptive frequencies and chi-square test. Results: Of the total participants, 650 (92.32%) patients provided consent. Average dental anxiety scale score was 12.46, representing high anxiety score. There were 174 (26.8%) smokers; only 234 (36%) had visited a dentist less than a year ago; 385 (59.2%) considered their dental health to be satisfactory; 306 (47.1%) thought of their treatment needs to be little'; 222 (34.2%) brushed their teeth twice daily. Dental anxiety was statistically significant with treatment needs and dental status. Relation of tooth-brushing with last dental visit and treatment needs was also found to be significant. Conclusion: A high level of dental anxiety was observed among the study population. The dental professionals should seek ways to help dentally anxious individuals. (author)

On-Orbit Planetary Science Laboratories for Simulating Surface Conditions of Planets and Small Bodies

Science.gov (United States)

Thangavelautham, J.; Asphaug, E.; Schwartz, S.

2017-02-01

Our work has identified the use of on-orbit centrifuge science laboratories as a key enabler towards low-cost, fast-track physical simulation of off-world environments for future planetary science missions.

Effect of Cooperative Learning and Traditional Methods on Students' Achievements and Identifications of Laboratory Equipments in Science-Technology Laboratory Course

Science.gov (United States)

Aydin, Suleyman

2011-01-01

Science lessons taught via experiments motivate the students, and make them more insistent on learning science. This study aims to examine the effects of cooperative learning on students' academic achievements and their skills in identifying laboratory equipments. The sample for the study consisted of a total of 43 sophomore students in primary…

Traumatic injuries of the permanent maxillory incisors at dental department, pakistan institute of medical sciences islamabad: A retrospective study

International Nuclear Information System (INIS)

Khan, N.A.; Maxood, A.; Khan, M.A.

2008-01-01

The study aims to ascertain the prevalence of traumatic dental injures of the maxillary permanent incisors at Dental Department, Pakistan Institute of Medical Science Islamabad during the years 2003-2005. Information concerning age, sex, cause, type of tooth number of injured teeth and patterns of tooth injury were recorded retrospectively from 33 patients aged between 8-40 years, comprising 498 traumatized teeth. The dental record of all the patients presenting with dental trauma were examined for collection of data relating to age, sex, cause, number of injured teeth, type of tooth and type of tooth trauma. Type of tooth trauma was recorded according to the Andreason classification. The data was subsequently processed and analyzed using the SPSS statistical software programme. The statistical significance level was set at 5%. Of the 336 patients, 227 were males (67.6%) and 109 were female (32.4%). The gender difference was statistically significant (p<0.0001). The patients had a total of 498 traumatized teeth. A large number of dental trauma occurred in patients aged between 9-11 years. Most injuries involved one tooth in 227 patients (67.6%). However two teeth in 90 patients (26.7%), three teeth in 11 patients (3.2%) and only in 8 patients (2.3%) four teeth were involved. Fractures in enamel only occurred in 74 teeth (14.6%). Uncomplicated crown fractures in 208 teeth (41.9%) were the most commonly encountered dental trauma. 137 teeth (27.6%) suffered complicated crown fractures, 44 teeth (8.9%) uncomplicated crown-root fractures, 19 teeth (3.8%) complicated crown-root fractures and avulsion in 16 teeth (3.2%) only. The main causes were falls in 225 patients (66.9%), collision with objects in 40 patients (11.9%), road traffic accident in 31 patients (9.2%) violence in 31 patients (6.2%), and sports in 19 patients (5.6%). The maxillary central incisor was traumatized in 384 teeth showing a high percentage of 77%. Raising public dental awareness regarding the

Introducing evidence-based dentistry to dental students using histology.

Science.gov (United States)

Lallier, Thomas E

2014-03-01

The expansion of evidence-based dentistry (EBD) is essential to the continued growth and development of the dental profession. Expanding EBD requires increased emphasis on critical thinking skills during dental education, as noted in the American Dental Education Association's Competencies for the New General Dentist. In order to achieve this goal, educational exercises must be introduced to increase the use of critical thinking skills early in the dental curriculum, with continued reinforcement as students progress through subsequent years. Described in this article is one approach to increasing student exposure to critical thinking during the early basic science curriculum-specifically, within the confines of a traditional histology course. A method of utilizing the medical and dental research literature to reinforce and enliven the concepts taught in histology is described, along with an approach for using peer-to-peer presentations to demonstrate the tools needed to critically evaluate research studies and their presentation in published articles. This approach, which could be applied to any basic science course, will result in a stronger foundation on which students can build their EBD and critical thinking skills.

Awareness of Eco-Friendly Dentistry among Dental Faculty and Students of King Khalid University, Saudi Arabia.

Science.gov (United States)

Al-Qarni, Mohammed A; Shakeela, Nasim Vahid; Alamri, Mohammed Abdullah; Alshaikh, Yahya A

2016-10-01

Eco-friendly or green dentistry can be a reality by effectively designing dental clinics and using more eco-friendly materials in the clinical practice. To determine the awareness of eco-friendly dentistry among dental faculty and students in preparation for future implementation. Assessment of knowledge regarding eco-friendly dentistry was done using an 18 item self-administered questionnaire among 160 participants. After baseline data collection, the intervention was done by educating participants with a power point presentation. The post-intervention data was then collected for analysis. Statistical analysis was done using Wilcoxon's signed rank test and one-way ANOVA. The educational intervention increased the knowledge about eco-friendly dentistry confirming the importance of continuing education. There was a statistically significant gain in knowledge among the participants after the presentation. The gain was highest for department of Preventive Dental Sciences (PDS) followed by Substitute Dental Sciences (SDS), No specialty, Maxillofacial Dental Sciences (MDS), and Restorative Dental Sciences (RDS) respectively. (F=5.5091, p<0.05). Lack of knowledge of green dentistry amongst the dental fraternity is highly prevailing. The same can be substantiated with effective training in the respective fields if channelized through the curriculum in an educational set-up.

Laboratory animal science course in Switzerland: participants' points of view and implications for organizers.

Science.gov (United States)

Crettaz von Roten, Fabienne

2018-02-01

Switzerland has implemented a mandatory training in laboratory animal science since 1999; however a comprehensive assessment of its effects has never been undertaken so far. The results from the analysis of participants in the Swiss Federation of European Laboratory Animal Science Associations (FELASA) Category B compulsory courses in laboratory animal science run in 2010, 2012, 2014 and 2016 showed that the participants fully appreciated all elements of the course. The use of live animals during the course was supported and explained by six arguments characterized with cognitive, emotional and forward-looking factors. A large majority considered that the 3R (replacement, reduction and refinement) principles were adequately applied during the course. Responses to an open question offered some ideas for improvements. This overall positive picture, however, revealed divergent answers from different subpopulations in our sample (for example, scientists with more hindsight, scientists trained in biology, or participants from Asian countries).

Multimedia interactive eBooks in laboratory science education

OpenAIRE

Morris, NP; Lambe, J

2017-01-01

Bioscience students in the UK higher education system are making increasing use of technology to support their learning within taught classes and during private study. This experimental study was designed to assess the role for multimedia interactive eBooks in bioscience laboratory classes, delivered using a blended learning approach. Thirty-nine second-year students on a Biomedical Science undergraduate course in a UK university were grouped using an experimental design into alternating tria...

Advances in dental public health.

Science.gov (United States)

Holt, R D

2001-07-01

Dental public health has been defined as 'the science and art of preventing oral diseases, promoting oral health and improving the quality of life through the organised efforts of society'. Dental practitioners most often have the oral health of individual patients as their primary focus but the aim of public health is to benefit populations. Early developments in dental public health were concerned largely with demonstrating levels of disease and with treatment services. With greater appreciation of the nature of oral health and disease, and of their determinants has come recognition of the need for wider public health action if the effects of prevention and oral health promotion are to be maximized.

Knowledge of dental ethics and jurisprudence among dental practitioners in Chennai, India: A cross-sectional questionnaire study

Directory of Open Access Journals (Sweden)

R Kesavan

2016-01-01

Full Text Available Introduction: Ethics is a science of ideal human character and behavior in situations where the distinction should be made between what is right and wrong. Dental jurisprudence is a set of legal regulations set forth by each state's legislature describing the legal limitations and regulations related to the practice of dentistry. Objectives: (1 To assess the dental practitioners' awareness about dentists (Code of Ethics regulation and jurisprudence. (2 To assess the awareness of dentists regarding Consumer Protection Act (COPRA and its implications in dentistry. Materials and Methods: A cross-sectional questionnaire survey was conducted. A pilot study was conducted to validate the questionnaire and to get the required sample size which was 346. A specially designed questionnaire consisting of 24 close-ended questions divided into two sections was used. The resulting data were coded, and statistical analysis was done using Statistical Package for Social Sciences (SPSS software version 17.0. Results: The results showed that about 65% of the dentists were aware that the Dentist Act was given in the year 1948 and 76% knew that the dentists (Code of Ethics regulation was given by the Dental Council of India. Only 33% knew that it is not unethical for a dental surgeon to supply or sell drugs related to dentistry in his clinic. Only 31% responded correctly that it is not necessary to obtain informed consent for clinical examination and routine radiography. Nearly, half of the respondents (43% were not aware of professional indemnity insurance. Conclusion: The study concludes that majority of the dental practitioners are aware of dental ethics but their knowledge on jurisprudence and COPRA needs to be enriched. Although recommendations can be made to the dental profession to alter their behavior, real improvement is unlikely without changes in legislation and social policy.

The Changing Character of Dental Practice and Its Impact on Dental Education.

Science.gov (United States)

Kerr, I. Lawrence

1981-01-01

The "practice" aspect of the dental profession is reviewed. It is suggested that there is no way to separate education, practice, research, financing, government, science, business, management, motivation, and the public from one another. Retail dentistry, health maintenance organizations, franchising, advertising, and denturism are…

Implementation science: the laboratory as a command centre.

Science.gov (United States)

Boeras, Debrah I; Nkengasong, John N; Peeling, Rosanna W

2017-03-01

Recent advances in point-of-care technologies to ensure universal access to affordable quality-assured diagnostics have the potential to transform patient management, surveillance programmes, and control of infectious diseases. Decentralization of testing can put tremendous stresses on fragile health systems if the laboratory is not involved in the planning, introduction, and scale-up strategies. The impact of investments in novel technologies can only be realized if these tests are evaluated, adopted, and scaled up within the healthcare system with appropriate planning and understanding of the local contexts in which these technologies will be used. In this digital age, the laboratory needs to take on the role of the Command Centre for technology introduction and implementation. Implementation science is needed to understand the political, cultural, economic, and behavioural context for technology introduction. The new paradigm should include: building a comprehensive system of laboratories and point-of-care testing sites to provide quality-assured diagnostic services with good laboratory-clinic interface to build trust in test results and linkage to care; building and coordinating a comprehensive national surveillance and communication system for disease control and global health emergencies; conducting research to monitor the impact of new tools and interventions on improving patient care.

The Mars Science Laboratory Organic Check Material

Science.gov (United States)

Conrad, Pamela G.; Eigenbrode, Jennifer L.; Von der Heydt, Max O.; Mogensen, Claus T.; Canham, John; Harpold, Dan N.; Johnson, Joel; Errigo, Therese; Glavin, Daniel P.; Mahaffy, Paul R.

2012-09-01

Mars Science Laboratory's Curiosity rover carries a set of five external verification standards in hermetically sealed containers that can be sampled as would be a Martian rock, by drilling and then portioning into the solid sample inlet of the Sample Analysis at Mars (SAM) suite. Each organic check material (OCM) canister contains a porous ceramic solid, which has been doped with a fluorinated hydrocarbon marker that can be detected by SAM. The purpose of the OCM is to serve as a verification tool for the organic cleanliness of those parts of the sample chain that cannot be cleaned other than by dilution, i.e., repeated sampling of Martian rock. SAM possesses internal calibrants for verification of both its performance and its internal cleanliness, and the OCM is not used for that purpose. Each OCM unit is designed for one use only, and the choice to do so will be made by the project science group (PSG).

Analytical methods for the measurement of polymerization kinetics and stresses of dental resin-based composites: A review

Directory of Open Access Journals (Sweden)

Mehrsima Ghavami-Lahiji

2017-01-01

Full Text Available Resin-based composites are commonly used restorative materials in dentistry. Such tooth-colored restorations can adhere to the dental tissues. One drawback is that the polymerization shrinkage and induced stresses during the curing procedure is an inherent property of resin composite materials that might impair their performance. This review focuses on the significant developments of laboratory tools in the measurement of polymerization shrinkage and stresses of dental resin-based materials during polymerization. An electronic search of publications from January 1977 to July 2016 was made using ScienceDirect, PubMed, Medline, and Google Scholar databases. The search included only English-language articles. Only studies that performed laboratory methods to evaluate the amount of the polymerization shrinkage and/or stresses of dental resin-based materials during polymerization were selected. The results indicated that various techniques have been introduced with different mechanical/physical bases. Besides, there are factors that may contribute the differences between the various methods in measuring the amount of shrinkages and stresses of resin composites. The search for an ideal and standard apparatus for measuring shrinkage stress and volumetric polymerization shrinkage of resin-based materials in dentistry is still required. Researchers and clinicians must be aware of differences between analytical methods to make proper interpretation and indications of each technique relevant to a clinical situation.

1.2 million kids and counting-Mobile science laboratories drive student interest in STEM.

Science.gov (United States)

Jones, Amanda L; Stapleton, Mary K

2017-05-01

In today's increasingly technological society, a workforce proficient in science, technology, engineering, and mathematics (STEM) skills is essential. Research has shown that active engagement by K-12 students in hands-on science activities that use authentic science tools promotes student learning and retention. Mobile laboratory programs provide this type of learning in schools and communities across the United States and internationally. Many programs are members of the Mobile Lab Coalition (MLC), a nonprofit organization of mobile and other laboratory-based education programs built on scientist and educator collaborations. A recent survey of the member programs revealed that they provide an impressive variety of programming and have collectively served over 1.2 million students across the US.

77 FR 12517 - VA Dental Insurance Program

Science.gov (United States)

2012-03-01

...) Clinical oral examinations. (B) Radiographs and diagnostic imaging. (C) Tests and laboratory examinations... particular VISNs, as regional groupings, could be detrimental to contract formation, as dental services can...

Los Alamos National Laboratory Science Education Program. Annual progress report, October 1, 1995--September 30, 1996

Energy Technology Data Exchange (ETDEWEB)

Gill, D.H.

1997-01-01

The National Teacher Enhancement program (NTEP) is a three-year, multi-laboratory effort funded by the National Science Foundation and the Department of Energy to improve elementary school science programs. The Los Alamos National Laboratory targets teachers in northern New Mexico. FY96, the third year of the program, involved 11 teams of elementary school teachers (grades 4-6) in a three-week summer session, four two-day workshops during the school year and an on-going planning and implementation process. The teams included twenty-one teachers from 11 schools. Participants earned a possible six semester hours of graduate credit for the summer institute and two hours for the academic year workshops from the University of New Mexico. The Laboratory expertise in the earth and environmental science provided the tie between the Laboratory initiatives and program content, and allowed for the design of real world problems.

The Impact of Research on the Future of Dental Education: How Research and Innovation Shape Dental Education and the Dental Profession.

Science.gov (United States)

Slavkin, Harold C

2017-09-01

Scientific inquiry and discovery are the fuel for education, research, technology, and health care in all the health professions: dentistry, medicine, nursing, pharmacy, and allied health sciences. The progression of discoveries from basic or fundamental to clinical research is followed by the progression from clinical to implementation and improved health outcomes and processes. Generally, implementation science is the scientific study of methods to promote the systematic uptake of research findings (e.g., basic, translational, behavioral, socioeconomic, and clinical) as well as other related evidence-based practices into standards of care, thereby improving the quality, effectiveness, and cost benefits of health care services. There is little doubt that science has and will continue to provide the essential fuel for innovations that lead to new and improved technologies for risk assessment, prevention, diagnosis, treatments and therapeutics, and implementation for addressing oral and craniofacial diseases and disorders. The history of the U.S. dental profession reviewed in this article gives testimony to the continued need for investments in scientific inquiry that accelerate progress in comprehensive health care for all people. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Human sciences in the first semester of the dental undergraduate course at the Karolinska Institute, Stockholm.

Science.gov (United States)

Röding, K

1999-08-01

The first 9 weeks of the dental undergraduate education at the Karolinska Institutet comprises a transition course, designed to introduce students to university studies leading to professional qualifications in patient-related health sciences. 1 week has been set aside for the theme Man and Society, highlighting the importance of the human sciences for the development of behavioural skills necessary for achieving professionalism and a holistic patient concept. Some essential ethical questions are addressed: intercultural communication, empathy, professional demeanour and the development of professional competence, and group dynamics. In this context, more specific subjects are considered, such as the emergence of the multicultural society and its implications for health services, interpersonal skills and patient communication in the health and medical fields. There are several reasons for including this theme, which forms the basis for the ethical and communicative strands throughout the entire curriculum. As 30-40% of freshmen dental students are of non-Swedish origin, it is essential to include cultural awareness seminars. Another reason is that within the EU, cultural and communicative skills are recognised proficiencies for health professionals; it is also acknowledged that effective delivery of health care may be impeded by misunderstandings in communication and conflict in ethical beliefs. Group discussions are scheduled during the week in order to allow the students to discuss their own experiences related to the theme. The students are also given a written assignment in relation to one of the seminars; the report is assessed as a part of the examination. The week is concluded by a plenum discussion summarising the group discussions. To date, 4 course evaluations, with a response rate of 92.5%, show that 97.3% of the students were positive to the theme as a whole or to specific seminars held during the week, especially intercultural communication, ethics and

The deep underground science and engineering laboratory at Homestake

Energy Technology Data Exchange (ETDEWEB)

Lesko, Kevin T, E-mail: ktlesko@lbl.go [Department of Physics, University of California Berkeley and Institute for Nuclear and Particle Astrophysics, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, MS 50R5239, Berkeley, CA 94720-8156 (United States)

2009-06-01

The US National Science Foundation and the US underground science community are well into the campaign to establish a world-class, multi-disciplinary deep underground science and engineering laboratory - DUSEL. The NSF's review committee, following the first two NSF solicitations, selected Homestake as the prime site to be developed into an international, multidisciplinary, world-class research facility. Homestake DUSEL will provide much needed underground research space to help relieve the worldwide shortage, particularly at great depth, and will develop research campuses at different depths to satisfy the research requirements for the coming decades. The State of South Dakota has demonstrated remarkable support for the project and has secured the site with the transfer of the former Homestake Gold Mine and has initiated re-entry and rehabilitation of the facility to host a modest interim science program with state funds and those from a substantial philanthropic donor. I review the scientific case for DUSEL and the progress in developing the preliminary design of DUSEL in Homestake and the initial suite of experiments to be funded along with the facility.

Center for Materials Science, Los Alamos National Laboratory. Status report, October 1, 1990--September 30, 1991

Energy Technology Data Exchange (ETDEWEB)

Parkin, D.M.; Boring, A.M. [comps.

1991-10-01

This report summarizes the progress of the Center for Materials Science (CMS) from October 1, 1990 to September 30, 1991, and is the nineth such annual report. It has been a year of remarkable progress in building the programs of the Center. The extent of this progress is described in detail. The CMS was established to enhance the contribution of materials science and technology to the Laboratory`s defense, energy and scientific missions, and the Laboratory. In carrying out these responsibilities it has accepted four demanding missions: (1) Build a core group of highly rated, established materials scientists and solid state physicists. (2) Promote and support top quality, interdisciplinary materials research programs at Los Alamos. (3) Strengthen the interactions of materials science and Los Alamos with the external materials science community. and (4) Establish and maintain modern materials research facilities in a readily accessible, central location.

Non-Stop Lab Week: A Real Laboratory Experience for Life Sciences Postgraduate Courses

Science.gov (United States)

Freitas, Maria João; Silva, Joana Vieira; Korrodi-Gregório, Luís; Fardilha, Margarida

2016-01-01

At the Portuguese universities, practical classes of life sciences are usually professor-centered 2-hour classes. This approach results in students underprepared for a real work environment in a research/clinical laboratory. To provide students with a real-life laboratory environment, the Non-Stop Lab Week (NSLW) was created in the Molecular…

77 FR 26069 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2012-05-02

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical Science Research and Development Services Scientific Merit Review Board, Notice of Meeting Amendment The... Development and Clinical Science Research and Development Services Scientific Merit Review Board have changed...

75 FR 57833 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2010-09-22

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical... the panels of the Joint Biomedical Laboratory Research and Development and Clinical Science Research... Crowne Plaza Clinical Research Program December 3, 2010 *VA Central Office Mental Hlth & Behav Sci-A...

Transforming Dental Technology Education: Skills, Knowledge, and Curricular Reform.

Science.gov (United States)

Bobich, Anita M; Mitchell, Betty L

2017-09-01

Dental technology is one of the core allied dental health professions supporting the practice of dentistry. By definition, it is the art, science, and technologies that enable the design and fabrication of dental prostheses and/or corrective devices to restore natural teeth and supporting structures to fulfill a patient's physiological and esthetic needs. Dental technology educational programs are faced with serious challenges, including rapid changes in technology, inadequate funding for educational programs, and the need to develop curricula that reflect current industry needs. Better communications between dental technologists and practitioners are needed to gain greater recognition of the contribution that technologists make to patient health. Amid these challenges, the technology workforce is dedicated to providing patients with the best possible restorative dental prostheses. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Education About Dental Hygienists' Roles in Public Dental Prevention Programs: Dental and Dental Hygiene Students' and Faculty Members' and Dental Hygienists' Perspectives.

Science.gov (United States)

Pervez, Anushey; Kinney, Janet S; Gwozdek, Anne; Farrell, Christine M; Inglehart, Marita R

2016-09-01

In 2005, Public Act No. 161 (PA 161) was passed in Michigan, allowing dental hygienists to practice in approved public dental prevention programs to provide services for underserved populations while utilizing a collaborative agreement with a supervising dentist. The aims of this study were to assess how well dental and dental hygiene students and faculty members and practicing dental hygienists have been educated about PA 161, what attitudes and knowledge about the act they have, and how interested they are in additional education about it. University of Michigan dental and dental hygiene students and faculty members, students in other Michigan dental hygiene programs, and dental hygienists in the state were surveyed. Respondents (response rate) were 160 dental students (50%), 63 dental hygiene students (82%), 30 dental faculty members (26%), and 12 dental hygiene faculty members (52%) at the University of Michigan; 143 dental hygiene students in other programs (20%); and 95 members of the Michigan Dental Hygienists' Association (10%). The results showed that the dental students were less educated about PA 161 than the dental hygiene students, and the dental faculty members were less informed than the dental hygiene faculty members and dental hygienists. Responding dental hygiene faculty members and dental hygienists had more positive attitudes about PA 161 than did the students and dental faculty members. Most of the dental hygiene faculty members and dental hygienists knew a person providing services in a PA 161 program. Most dental hygiene students, faculty members, and dental hygienists wanted more education about PA 161. Overall, the better educated about the program the respondents were, the more positive their attitudes, and the more interested they were in learning more.

Visualisation of dental images

International Nuclear Information System (INIS)

Md Saion Salikin; Azuhar Ripin; Wan Hazlinda Ismail; Asmaliza Hashim; Norriza Mohd Isa; Suriany Sarmid

2005-01-01

Since the invention and the discovery of x-rays, physicians, surgeons and life scientists have been using images to diagnose and subsequently treat diseases. X-ray is also widely used in many imaging techniques to better understand basics anatomy, physiology and biology as well as testing and analytical work in physical science. In dentistry, x-ray technique has been employed to get a panoramic view of the whole teeth of a particular patient. A panoramic dental radiograph is very useful in dentistry for diagnostic purpose, denture preparation, as well as for orthodontic. Image visualisation is an important aspect especially for the dentists to analyse and proceed with a particulate dental treatment. In this project panoramic dental image obtained by using a standard phantom is visualised by using Interactive Data Language (IDL) software. A panoramic dental x-ray machine, Cranex3, is used to get a panoramic radiograph, which is subsequently digitized, by using Vidar digitizer (Sierra Plus). The 2D digitized image is enhance and apply other visualising techniques such as surface rendering and volume rendering technique using Interactive Data Language (IDL) software as a first step in 3D visualisation. In this paper, visualising of panoramic dental radiograph by using IDL is discussed in brief. (Author)

A pocket guide to electronic laboratory notebooks in the academic life sciences [version 1; referees: 3 approved

Directory of Open Access Journals (Sweden)

Ulrich Dirnagl

2016-01-01

Full Text Available Every professional doing active research in the life sciences is required to keep a laboratory notebook. However, while science has changed dramatically over the last centuries, laboratory notebooks have remained essentially unchanged since pre-modern science. We argue that the implementation of electronic laboratory notebooks (eLN in academic research is overdue, and we provide researchers and their institutions with the background and practical knowledge to select and initiate the implementation of an eLN in their laboratories. In addition, we present data from surveying biomedical researchers and technicians regarding which hypothetical features and functionalities they hope to see implemented in an eLN, and which ones they regard as less important. We also present data on acceptance and satisfaction of those who have recently switched from paper laboratory notebook to an eLN.  We thus provide answers to the following questions: What does an electronic laboratory notebook afford a biomedical researcher, what does it require, and how should one go about implementing it?

1.4 Research and the dental student

DEFF Research Database (Denmark)

DePaola, Dominick; Howell, Howard; Baker, Charles G

2002-01-01

complications of cancer treatment; the treatments of HIV/AIDS diseases and hepatitis; the use of dental and dental hygiene staff on health-care teams to deal with issues such as birth defects, orofacial trauma, head and neck cancer, chronic pain management and so on. There seems to be an excessive emphasis......There has been significant concern that the dental curriculum and system of clinical education, in particular, is not designed to take advantage of the explosion in knowledge in biomedical science and its application to the health of the public. Although there are some examples of innovations...

Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review.

Science.gov (United States)

Rosa, Wellington Luiz de Oliveira; Silva, Tiago Machado; Lima, Giana da Silveira; Silva, Adriana Fernandes; Piva, Evandro

2016-01-01

A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in countries such as Brazil.

Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review

Science.gov (United States)

ROSA, Wellington Luiz de Oliveira; SILVA, Tiago Machado; LIMA, Giana da Silveira; SILVA, Adriana Fernandes; PIVA, Evandro

2016-01-01

ABSTRACT Objective A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. Material and Methods This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). Results A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Conclusions Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in

Effect of Using Separate Laboratory and Lecture Courses for Introductory Crop Science on Student Performance.

Science.gov (United States)

Wiebold, W. J.; Slaughter, Leon

1986-01-01

Reviews a study that examined the effects of laboratories on the grade performance of undergraduates in an introductory crop science course. Results indicated that students enrolled in lecture and laboratory concurrently did not receive higher lecture grades than students enrolled solely in lecture, but did have higher laboratory grades. (ML)

Survey of Laboratories and Implementation of the Federal Defense Laboratory Diversification Program. Annex B. Department of the Navy Domestic Technology Transfer

Science.gov (United States)

1993-10-01

overseas laboratories. Dental capabilities include oral microbiology, manufacturing technology for unique (dental prosthetic ) items, dental materials...with the National Center of Excellence in Metalworking to rectify production problems in manufacturing low loss, high pressure valves used in...34 Proceedings of the ASTE Fifth Symposium on Composite Materials: Fatigue and Fracture , May 1993. Chen, J. S. J., T. J. Praisner, L. A. Fields, R. T. Norhold and

Selection of the Mars Science Laboratory landing site

Science.gov (United States)

Golombek, M.; Grant, J.; Kipp, D.; Vasavada, A.; Kirk, Randolph L.; Fergason, Robin L.; Bellutta, P.; Calef, F.; Larsen, K.; Katayama, Y.; Huertas, A.; Beyer, R.; Chen, A.; Parker, T.; Pollard, B.; Lee, S.; Hoover, R.; Sladek, H.; Grotzinger, J.; Welch, R.; Dobrea, E. Noe; Michalski, J.; Watkins, M.

2012-01-01

The selection of Gale crater as the Mars Science Laboratory landing site took over five years, involved broad participation of the science community via five open workshops, and narrowed an initial >50 sites (25 by 20 km) to four finalists (Eberswalde, Gale, Holden and Mawrth) based on science and safety. Engineering constraints important to the selection included: (1) latitude (±30°) for thermal management of the rover and instruments, (2) elevation (surface that is safe for landing and roving and not dominated by fine-grained dust. Science criteria important for the selection include the ability to assess past habitable environments, which include diversity, context, and biosignature (including organics) preservation. Sites were evaluated in detail using targeted data from instruments on all active orbiters, and especially Mars Reconnaissance Orbiter. All of the final four sites have layered sedimentary rocks with spectral evidence for phyllosilicates that clearly address the science objectives of the mission. Sophisticated entry, descent and landing simulations that include detailed information on all of the engineering constraints indicate all of the final four sites are safe for landing. Evaluation of the traversabilty of the landing sites and target “go to” areas outside of the ellipse using slope and material properties information indicates that all are trafficable and “go to” sites can be accessed within the lifetime of the mission. In the final selection, Gale crater was favored over Eberswalde based on its greater diversity and potential habitability.

76 FR 19188 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2011-04-06

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical... the panels of the Joint Biomedical Laboratory Research and Development and Clinical Science Research.... Neurobiology-D June 10, 2011 Crowne Plaza DC/Silver Spring. Clinical Research Program June 13, 2011 VA Central...

75 FR 23847 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2010-05-04

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical... panels of the Joint Biomedical Laboratory Research and Development and Clinical Science Research and... & Behav Sci-A June 7, 2010 L'Enfant Plaza Hotel. Clinical Research Program June 9, 2010 *VA Central Office...

Marine Sciences Laboratory Radionuclide Air Emissions Report for Calendar Year 2014

Energy Technology Data Exchange (ETDEWEB)

Snyder, Sandra F.; Barnett, J. Matthew

2015-05-04

The U.S. Department of Energy Office of Science (DOE-SC) Pacific Northwest Site Office (PNSO) has oversight and stewardship duties associated with the Pacific Northwest National Laboratory (PNNL) Marine Sciences Laboratory (MSL) located on Battelle Land – Sequim.This report is prepared to document compliance with the Code of Federal Regulations (CFR), Title 40, Protection of the Environment, Part 61, National Emission Standards for Hazardous Air Pollutants (NESHAP), Subpart H, ''National Emission Standards for Emissions of Radionuclides Other than Radon from Department of Energy Facilities” and Washington Administrative Code (WAC) Chapter 246-247, “Radiation Protection–Air Emissions.'' The EDE to the MSL MEI due to routine operations in 2014 was 9E-05 mrem (9E-07 mSv). No non-routine emissions occurred in 2014. The MSL is in compliance with the federal and state 10 mrem/yr standard.

Marine Sciences Laboratory Radionuclide Air Emissions Report for Calendar Year 2013

Energy Technology Data Exchange (ETDEWEB)

Snyder, Sandra F.; Barnett, J. Matthew; Ballinger, Marcel Y.

2014-05-01

The U.S. Department of Energy Office of Science (DOE-SC) Pacific Northwest Site Office (PNSO) has oversight and stewardship duties associated with the Pacific Northwest National Laboratory (PNNL) Marine Sciences Laboratory (MSL) located on Battelle Land – Sequim (Sequim). This report is prepared to document compliance with the Code of Federal Regulations (CFR), Title 40, Protection of the Environment, Part 61, National Emission Standards for Hazardous Air Pollutants (NESHAP), Subpart H, “National Emission Standards for Emissions of Radionuclides Other than Radon from Department of Energy Facilities” and Washington Administrative Code (WAC) Chapter 246-247, “Radiation Protection–Air Emissions.” The EDE to the Sequim MEI due to routine operations in 2013 was 5E-05 mrem (5E-07 mSv). No non-routine emissions occurred in 2013. The MSL is in compliance with the federal and state 10 mrem/yr standard.

The Dental Hygiene Aptitude Tests and the American College Testing Program Tests as Predictors of Scores on the National Board Dental Hygiene Examination.

Science.gov (United States)

Longenbecker, Sueann; Wood, Peter H.

1984-01-01

Scores from the National Board Dental Hygiene Examination (NBDHE) served as the criterion variable in a comparison of the predictive validity of the Dental Hygiene Aptitude Tests (DHAT) and the ACT Assessment tests. The DHAT-Science and Verbal tests combined to produce the highest multiple correlation with NBDHE scores. (Author/DWH)

Chemical Analysis of Soils: An Environmental Chemistry Laboratory for Undergraduate Science Majors.

Science.gov (United States)

Willey, Joan D.; Avery, G. Brooks, Jr.; Manock, John J.; Skrabal, Stephen A.; Stehman, Charles F.

1999-01-01

Describes a laboratory exercise for undergraduate science students in which they evaluate soil samples for various parameters related to suitability for crop production and capability for retention of contaminants. (Contains 18 references.) (WRM)

Dental students' motivation and the context of learning.

Science.gov (United States)

Kristensen, Bettina Tjagvad; Netterstrom, Ingeborg; Kayser, Lars

2009-02-01

This qualitative study shows dental students' motives for choosing the dental education and how the motives influence their motivation at the first semester of study. Further the study demonstrates the relevance of the context of learning. This issue is of importance when planning a curriculum for the dental education. The material consists of interviews with eight dental students. The results show that dental students were focused on their future professional role, its practical dimensions and their future working conditions. Their motivation for choosing the dental education was found to influence their motivation for studying and their experience of the relevance of the first semester. The dental students who had co-education with the medical students at the first year of study missed a dental context and courses with clinically relevant contents. In conclusion, our data signify the importance of the context of learning. It is recommended that a future curriculum for the dental school should be designed in a way where basic science subjects are taught with both theoretically as well as practically oriented subjects and in a context which is meaningful for the students.

The Effects of Using Jigsaw Method Based on Cooperative Learning Model in the Undergraduate Science Laboratory Practices

Science.gov (United States)

Karacop, Ataman

2017-01-01

The main aim of the present study is to determine the influence of a Jigsaw method based on cooperative learning and a confirmatory laboratory method on prospective science teachers' achievements of physics in science teaching laboratory practice courses. The sample of this study consisted of 33 female and 15 male third-grade prospective science…

Clinical utility of dental cone-beam computed tomography: current perspectives

Directory of Open Access Journals (Sweden)

Jaju PP

2014-04-01

Full Text Available Prashant P Jaju,1 Sushma P Jaju21Oral Medicine and Radiology, 2Conservative Dentistry and Endodontics, Rishiraj College of Dental Sciences and Research Center, Bhopal, IndiaAbstract: Panoramic radiography and computed tomography were the pillars of maxillofacial diagnosis. With the advent of cone-beam computed tomography, dental practice has seen a paradigm shift. This review article highlights the potential applications of cone-beam computed tomography in the fields of dental implantology and forensic dentistry, and its limitations in maxillofacial diagnosis.Keywords: dental implants, cone-beam computed tomography, panoramic radiography, computed tomography

Dental management of medically compromised patients

Directory of Open Access Journals (Sweden)

Sherly Horax

2016-06-01

Full Text Available These days, treatment in dentistry is no longer for patient without complication, but also for patient with bad medical record. With correct treatment management in handling medical condition of patient, not only for dental treatment but also their systematic disease, all the dental staff also can improve for the better quality of life of the patient. Patient with medical compromised start to realize that  keeping good oral hygiene is so important for their lives, therefore dental staff need to improve their science and technology and also for facing patient with medical compromised. This article will discuss and suggest various treatment consideration and protocol for the patient of with medical compromised.

The Effect of Simulation-Assisted Laboratory Applications on Pre-Service Teachers' Attitudes towards Science Teaching

Science.gov (United States)

Ulukök, Seyma; Sari, Ugur

2016-01-01

In this study, the effects of computer-assisted laboratory applications on pre-service science teachers' attitudes towards science teaching were investigated and the opinions of the pre-service teachers about the application were also determined. The study sample consisted of 46 students studying science teaching Faculty of Education. The study…

Prevalence and factors associated with dental caries among ...

African Journals Online (AJOL)

Prevalence and factors associated with dental caries among children and adults in selected districts in Uganda. Annet Kutesa, Arabat Kasangaki, Moses Nkamba, Louis Muwazi, Isaac Okullo, Charles Mugisha Rwenyonyi. Department of Dentistry, School of Health Sciences, College of Health Sciences, Makerere University, ...

Strategies for the assessment of competence in laboratory animal science courses

DEFF Research Database (Denmark)

Hansen, Axel Kornerup; Sørensen, Dorte Bratbo

2014-01-01

Evaluation of skills, knowledge and competencies is an essential part of education in laboratory animal science. In Europe, a greater emphasis will be placed on such evaluations going forward, because the European Union will base its education and training framework on learning outcomes rather than...

Morphological study on dental caries induced in WBN/KobSlc rats (Rattus norvegicus) fed a standard laboratory diet.

Science.gov (United States)

Fukuzato, Yoko; Matsuura, Tetsuro; Ozaki, Kiyokazu; Matsuura, Masahiro; Sano, Tomoya; Nakahara, Yutaka; Kodama, Yasushi; Nakagawa, Akihito; Okamura, Sumie; Suido, Hirohisa; Torii, Kayo; Makino, Taketoshi; Narama, Isao

2009-10-01

In our previous studies, WBN/KobSlc was characterized as a rat strain in which only males began to develop pancreatitis, and then presented with diabetic symptoms. In the course of studying their pancreatic inflammation, we detected molar caries in prediabetic males feeding on a standard diet (CRF-1) widely used for experimental animals. The purpose of this study is to confirm whether the WBN/KobSlc strain is caries-susceptible to the diet reported to be non-cariogenic, and to examine the effect of a prediabetic condition on their dental caries. For a morphological study, 25 male WBN/KobSlc rats aged 3.2-7.8 months and 24 females of the same strain aged 3.3-6.6 months were used, along with 10 males and 10 females of 8.2-month-old F344 rats. Marked dental caries were detected in the mandibular molars of male and female WBN/KobSlc rats regardless of pancreatitis, although no similar changes were observed in any teeth of the F344 strain fed the same diet. Soft X-ray examination revealed that the caries began in the crown and progressed horizontally and vertically, and that a severe radiolucent lesion extensively expanded to the entire crown, corresponding to a macroscopically deleted molar. The caries had gradually developed mainly in the second mandibular molar from more than 3.5 months of age, while none were seen in any rats before that time. The WBN/KobSlc rats were caries-susceptible even to the standard laboratory diet, and pancreatitis was not directly associated with the onset of dental caries in this strain.

Anisotropic local physical properties of human dental enamel in comparison to properties of some common dental filling materials.

Science.gov (United States)

Raue, Lars; Hartmann, Christiane D; Rödiger, Matthias; Bürgers, Ralf; Gersdorff, Nikolaus

2014-11-01

A major aspect in evaluating the quality of dental materials is their physical properties. Their properties should be a best fit of the ones of dental hard tissues. Manufacturers give data sheets for each material. The properties listed are characterized by a specific value. This assumes (but does not prove) that there is no direction dependence of the properties. However, dental enamel has direction-dependent properties which additionally vary with location in the tooth. The aim of this paper is to show the local direction dependence of physical properties like the elastic modulus or the thermal expansion in dental hard tissues. With this knowledge the 'perfect filling/dental material' could be characterized. Enamel sections of ∼400-500 μm thickness have been cut with a diamond saw from labial/buccal to palatal/lingual (canine, premolar and molar) and parallel to labial (incisor). Crystallite arrangements have been measured in over 400 data points on all types of teeth with x-ray scattering techniques, known from materials science. X-ray scattering measurements show impressively that dental enamel has a strong direction dependence of its physical properties which also varies with location within the tooth. Dental materials possess only little or no property direction dependence. Therefore, a mismatch was found between enamel and dental materials properties. Since dental materials should possess equal (direction depending) properties, worthwhile properties could be characterized by transferring the directional properties of enamel into a property 'wish list' which future dental materials should fulfil. Hereby the 'perfect dental material' can be characterized.

Using Self-Reflection To Increase Science Process Skills in the General Chemistry Laboratory

Science.gov (United States)

Veal, William R.; Taylor, Dawne; Rogers, Amy L.

2009-03-01

Self-reflection is a tool of instruction that has been used in the science classroom. Research has shown great promise in using video as a learning tool in the classroom. However, the integration of self-reflective practice using video in the general chemistry laboratory to help students develop process skills has not been done. Immediate video feedback and direct instruction were employed in a general chemistry laboratory course to improve students' mastery and understanding of basic and advanced process skills. Qualitative results and statistical analysis of quantitative data proved that self-reflection significantly helped students develop basic and advanced process skills, yet did not seem to influence the general understanding of the science content.

Role of dental expert in forensic odontology

Science.gov (United States)

Verma, Anoop K.; Kumar, Sachil; Rathore, Shiuli; Pandey, Abhishek

2014-01-01

Forensic dentistry has become an integral part of forensic science over the past 100 years that utilizes dental or oro-facial findings to serve the judicial system. This has been due to the dedication of people like Gustafson's, Keiser-Nielson, and Suzuki for this field. They established the essential role which forensic dentistry plays mainly in the identification of human remains. The tooth has been used as weapons and under certain circumstances, may leave information about the identity of the biter. Dental professionals have a major role to play in keeping accurate dental records and providing all necessary information so that legal authorities may recognize mal practice, negligence, fraud or abuse, and identity of unknown individuals. This paper will try to summarize the various roles of dental experts in forensic medicine. PMID:25298709

Clinical utility of dental cone-beam computed tomography: current perspectives

OpenAIRE

Jaju, Prashant P; Jaju, Sushma P

2014-01-01

Prashant P Jaju,1 Sushma P Jaju21Oral Medicine and Radiology, 2Conservative Dentistry and Endodontics, Rishiraj College of Dental Sciences and Research Center, Bhopal, IndiaAbstract: Panoramic radiography and computed tomography were the pillars of maxillofacial diagnosis. With the advent of cone-beam computed tomography, dental practice has seen a paradigm shift. This review article highlights the potential applications of cone-beam computed tomography in the fields of dental implantology an...

Dental Charting. Learning Activities, Unit Tests, Progress Chart, and Work Sheet.

Science.gov (United States)

Texas Univ., Austin. Center for Occupational Curriculum Development.

These materials are part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. These student materials, designed to be used with the Dental Charting Student Manual, consist of learning activities, unit…

Dental Calculus Arrest of Dental Caries.

Science.gov (United States)

Keyes, Paul H; Rams, Thomas E

An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. These observations further document the potential protective effects of dental calculus mineralization against dental caries.

Dental Calculus Arrest of Dental Caries

Science.gov (United States)

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. Materials and methods A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Results Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. Conclusions These observations further document the potential protective effects of dental calculus mineralization against dental caries. PMID:27446993

The laboratory of the mind thought experiments in the natural sciences

CERN Document Server

Brown, James Robert

1993-01-01

Thought experiments are performed in the laboratory of the mind. Beyond this metaphor it is difficult to say just what these remarkable devices for investigating nature are or how they work. Though most scientists and philosophers would admit their great importance, there has been very little serious study of them. This volume is the first book-length investigation of thought experiments. Starting with Galileo's argument on falling bodies, Brown describes numerous examples of the most influential thought experiments from the history of science. Following this introduction to the subject, some substantial and provocative claims are made, the principle being that some thought experiments should be understood in the same way that platonists understand mathematical activity: as an intellectual grasp of an independently existing abstract realm. With its clarity of style and structure, The Laboratory of the Mind will find readers among all philosophers of science as well as scientists who have puzzled over how thou...

The uses of Interactive Whiteboard in a science laboratory

OpenAIRE

Bozzo, Giacomo

2015-01-01

In the last ten years several studies were conducted about the educational use of interactive whiteboard (IWB) in teaching and learning activities, showing different advantages introduced by this technology and analysing different implications for teachers (both from technical and pedagogical point of view). In this context, we planned a research with the aim of analysing the activities that can be performed through the interactive whiteboard in science laboratories, in order to characterize ...

Medical laboratory science and nursing students' perception of academic learning environment in a Philippine university using Dundee Ready Educational Environment Measure (DREEM).

Science.gov (United States)

Barcelo, Jonathan M

2016-01-01

This study aimed to compare the perception of the academic learning environment between medical laboratory science students and nursing students at Saint Louis University, Baguio City, Philippines. A cross-sectional survey research design was used to measure the perceptions of the participants. A total of 341 students from the Department of Medical Laboratory Science, School of Natural Sciences, and the School of Nursing answered the Dundee Ready Education Environment Measure (DREEM) instrument from April to May 2016. Responses were compared according to course of study, gender, and year level. The total mean DREEM scores of the medical laboratory science students and nursing students did not differ significantly when grouped according to course of study, gender, or year level. Medical laboratory science students had significantly lower mean scores in the sub-domains 'perception of learning' and 'perception of teaching.' Male medical laboratory science students had significantly lower mean scores in the sub-domain 'perception of learning' among second year students. Medical laboratory science students had significantly lower mean scores in the sub-domain 'perception of learning.' Nursing students identified 7 problem areas, most of which were related to their instructors. Medical laboratory science and nursing students viewed their academic learning environment as 'more positive than negative.' However, the relationship of the nursing instructors to their students needs improvement.

Laser welding by dental Nd:YAG device

Science.gov (United States)

Fornaini, Carlo; Bertrand, Caroline; Merigo, Elisabetta; Bonanini, Mauro; Rocca, Jean-Paul; Nammour, Samir

2009-06-01

Welding laser was introduced in jewellery during years 70 and, just after, was successfully used also by dental technicians. Welding laser gives a great number of advantages, versus traditional welding and, for this reason, this procedure had a great diffusion in the technician laboratories and stimulated the companies to put in the market more and more evolutes appliances. Some aspects, such great dimensions, high costs and delivery system today still characterize these machines by fixed lenses, which have strictly limited its use only to technician laboratories. The aim of this study is to demonstrate the possibility, by using a fibber-delivered laser normally utilized in the dental office, to make, by dentist himself in his office, welding on different metals and to evaluate advantages and possibilities of this new technique.

About Region 3's Laboratory and Field Services at EPA's Environmental Science Center

Science.gov (United States)

Mission & contact information for EPA Region 3's Laboratory and Field Services located at EPA's Environmental Science Center: the Office of Analytical Services and Quality Assurance & Field Inspection Program

Bleeding disorders in dental practice: A diagnostic overview

Directory of Open Access Journals (Sweden)

Abhirup Goswami

2014-01-01

Full Text Available Dental health care workers are increasingly called upon to provide quality dental care to individuals whose bleeding and clotting mechanisms have been altered by inherited or acquired diseases. This provides an opportunity for the dentist who is trained in the recognition of oral and systemic signs of altered hemostasis to assist in the diagnosis of the underlying condition. A number of dental procedures result in the risk of bleeding that can have serious consequences, such as severe hemorrhage or possibly death, for the patient with a bleeding disorder. Oral care providers must be aware of the impact of bleeding disorders on the management of their patients. These disorders must be recognized from history, clinical examinations, and laboratory investigations, if indicated, prior to surgical procedures including those in dental surgery to prevent bleeding related complications. Safe dental care may require consultation with the patient′s physician, systemic management, and dental treatment modifications. The purpose of this article is how to identify these patients with bleeding disorders.

Irradiation hazards and safety standards for patients in dental radiography

Energy Technology Data Exchange (ETDEWEB)

Williamson, B D.P.

1975-07-01

The historical developments which have led to a reduction in the hazards or potential hazards to patients in dental radiography are reviewed. Based on a simple risk estimate, the safety of present-day techniques employed in routine dental radiography is assessed. Also included in the review is a description of techniques used and results obtained from the National Radiation Laboratory's (NRL) surveillance programme of patients' exposure to irradiation in dental radiography. The possibilities of and need for achieving further reductions of irradiation are discussed.

Using tablet technology and instructional videos to enhance preclinical dental laboratory learning.

Science.gov (United States)

Gadbury-Amyot, Cynthia C; Purk, John H; Williams, Brian Joseph; Van Ness, Christopher J

2014-02-01

The purpose of this pilot study was to examine if tablet technology with accompanying instructional videos enhanced the teaching and learning outcomes in a preclinical dental laboratory setting. Two procedures deemed most challenging in Operative Dentistry II were chosen for the development of instructional videos. A random sample of thirty students was chosen to participate in the pilot. Comparison of faculty evaluations of the procedures between the experimental (tablet) and control (no tablet) groups resulted in no significant differences; however, there was a trend toward fewer failures in the experimental group. Examination of the ability to accurately self-assess was compared by exploring correlations between faculty and student evaluations. While correlations were stronger in the experimental group, the control group had significant correlations for all three procedures, while the experimental group had significant correlations on only two of the procedures. Students strongly perceived that the tablets and videos helped them perform better and more accurately self-assess their work products. Students did not support requiring that they purchase/obtain a specific brand of technology. As a result of this pilot study, further development of ideal and non-ideal videos are in progress, and the school will be implementing a "Bring Your Own Device" policy with incoming students.

Evaluating the effectiveness of a laboratory-based professional development program for science educators

Science.gov (United States)

Amolins, Michael W.; Ezrailson, Cathy M.; Pearce, David A.; Elliott, Amy J.

2015-01-01

The process of developing effective science educators has been a long-standing objective of the broader education community. Numerous studies have recommended not only depth in a teacher's subject area but also a breadth of professional development grounded in constructivist principles, allowing for successful student-centered and inquiry-based instruction. Few programs, however, have addressed the integration of the scientific research laboratory into the science classroom as a viable approach to professional development. Additionally, while occasional laboratory training programs have emerged in recent years, many lack a component for translating acquired skills into reformed classroom instruction. Given the rapid development and demand for knowledgeable employees and an informed population from the biotech and medical industries in recent years, it would appear to be particularly advantageous for the physiology and broader science education communities to consider this issue. The goal of this study was to examine the effectiveness of a laboratory-based professional development program focused on the integration of reformed teaching principles into the classrooms of secondary teachers. This was measured through the program's ability to instill in its participants elevated academic success while gaining fulfillment in the classroom. The findings demonstrated a significant improvement in the use of student-centered instruction and other reformed methods by program participants as well as improved self-efficacy, confidence, and job satisfaction. Also revealed was a reluctance to refashion established classroom protocols. The combination of these outcomes allowed for construction of an experiential framework for professional development in applied science education that supports an atmosphere of reformed teaching in the classroom. PMID:26628658

Biomedical laboratory science education: standardising teaching content in resource-limited countries

Directory of Open Access Journals (Sweden)

Wendy Arneson

2013-06-01

Full Text Available Background: There is a worldwide shortage of qualified laboratory personnel to provide adequate testing for the detection and monitoring of diseases. In an effort to increase laboratory capacity in developing countries, new skills have been introduced into laboratory services. Curriculum revision with a focus on good laboratory practice is an important aspect of supplying entry-level graduates with the competencies needed to meet the current needs. Objectives: Gaps in application and problem-solving competencies of newly graduated laboratory personnel were discovered in Ethiopia, Tanzania and Kenya. New medical laboratory teaching content was developed in Ethiopia, Tanzania and Kenya using national instructors, tutors, and experts and consulting medical laboratory educators from the United States of America (USA. Method: Workshops were held in Ethiopia to create standardised biomedical laboratory science (BMLS lessons based on recently-revised course objectives with an emphasis on application of skills. In Tanzania, course-module teaching guides with objectives were developed based on established competency outcomes and tasks. In Kenya, example interactive presentations and lesson plans were developed by the USA medical laboratory educators prior to the workshop to serve as resources and templates for the development of lessons within the country itself. Results: The new teaching materials were implemented and faculty, students and other stakeholders reported successful outcomes. Conclusions: These approaches to updating curricula may be helpful as biomedical laboratory schools in other countries address gaps in the competencies of entry-level graduates.

75 FR 60091 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

Science.gov (United States)

2010-09-29

... DEPARTMENT OF DEFENSE Office of the Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration Project, Department of the Army, Army Research, Development and... project; correction. SUMMARY: On September 9, 2010 (75 FR 55199), DoD published a notice concerning the...

76 FR 67154 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Program

Science.gov (United States)

2011-10-31

... to eight legacy Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration (demo) Project Plans resulting from section 1107(c) of the National Defense Authorization Act... flexibilities, modifying demo project plans, or executing Federal Register Notices has identified some areas for...

Perception of Dental Professionals towards Biostatistics.

Science.gov (United States)

Batra, Manu; Gupta, Mudit; Dany, Subha Soumya; Rajput, Prashant

2014-01-01

Biostatistics is becoming an integral part of dental sciences. Awareness regarding the subject is not thoroughly assessed in the field of dentistry. So the study was conducted to assess dental professionals' knowledge, attitude, and perception toward biostatistics at an academic dental institution. An anonymous cross-sectional questionnaire survey was conducted among all the faculty and postgraduate students of two dental colleges in Moradabad, Uttar Pradesh. The responses were assessed on 5-point likert scale. The survey response rate was 73.71%. Two-thirds of respondents believed biostatistics to be a difficult subject and at the same time half of them did not consider it to be more difficult than other subjects in dentistry. Females were less competent than males in applying biostatistical skills which was found to be statistically significant. Results suggested that dentists with research or academics as an adjunct to their clinical practice had better command over the subject. The current study shows that there is lack of command over the subject of biostatistics among dental professionals although they were aware of its importance in dentistry. There is a need of changing the training pattern of biostatistics for dental professionals which would make them confident enough to apply biostatistics in their clinical practice.

Medical laboratory science and nursing students’ perception of academic learning environment in a Philippine university using Dundee Ready Educational Environment Measure (DREEM

Directory of Open Access Journals (Sweden)

Jonathan M. Barcelo

2016-09-01

Full Text Available Purpose This study aimed to compare the perception of the academic learning environment between medical laboratory science students and nursing students at Saint Louis University, Baguio City, Philippines. Methods A cross-sectional survey research design was used to measure the perceptions of the participants. A total of 341 students from the Department of Medical Laboratory Science, School of Natural Sciences, and the School of Nursing answered the Dundee Ready Education Environment Measure (DREEM instrument from April to May 2016. Responses were compared according to course of study, gender, and year level. Results The total mean DREEM scores of the medical laboratory science students and nursing students did not differ significantly when grouped according to course of study, gender, or year level. Medical laboratory science students had significantly lower mean scores in the sub-domains ‘perception of learning’ and ‘perception of teaching.’ Male medical laboratory science students had significantly lower mean scores in the sub-domain ‘perception of learning’ among second year students. Medical laboratory science students had significantly lower mean scores in the sub-domain ‘perception of learning.’ Nursing students identified 7 problem areas, most of which were related to their instructors. Conclusion Medical laboratory science and nursing students viewed their academic learning environment as ‘more positive than negative.’ However, the relationship of the nursing instructors to their students needs improvement.

Overview of theory and simulations in the Heavy Ion Fusion Science Virtual National Laboratory

Science.gov (United States)

Friedman, Alex

2007-07-01

The Heavy Ion Fusion Science Virtual National Laboratory (HIFS-VNL) is a collaboration of Lawrence Berkeley National Laboratory, Lawrence Livermore National Laboratory, and Princeton Plasma Physics Laboratory. These laboratories, in cooperation with researchers at other institutions, are carrying out a coordinated effort to apply intense ion beams as drivers for studies of the physics of matter at extreme conditions, and ultimately for inertial fusion energy. Progress on this endeavor depends upon coordinated application of experiments, theory, and simulations. This paper describes the state of the art, with an emphasis on the coordination of modeling and experiment; developments in the simulation tools, and in the methods that underly them, are also treated.

Integrated Earth Science Research in Deep Underground Science and Engineering Laboratories

Science.gov (United States)

Wang, J. S.; Hazen, T. C.; Conrad, M. E.; Johnson, L. R.; Salve, R.

2004-12-01

There are three types of sites being considered for deep-underground earth science and physics experiments: (1) abandoned mines (e.g., the Homestake Gold Mine, South Dakota; the Soudan Iron Mine, Minnesota), (2) active mines/facilities (e.g., the Henderson Molybdenum Mine, Colorado; the Kimballton Limestone Mine, Virginia; the Waste Isolation Pilot Plant [in salt], New Mexico), and (3) new tunnels (e.g., Icicle Creek in the Cascades, Washington; Mt. San Jacinto, California). Additional sites have been considered in the geologically unique region of southeastern California and southwestern Nevada, which has both very high mountain peaks and the lowest point in the United States (Death Valley). Telescope Peak (along the western border of Death Valley), Boundary Peak (along the California-Nevada border), Mt. Charleston (outside Las Vegas), and Mt. Tom (along the Pine Creek Valley) all have favorable characteristics for consideration. Telescope Peak can site the deepest laboratory in the United States. The Mt. Charleston tunnel can be a highway extension connecting Las Vegas to Pahrump. The Pine Creek Mine next to Mt. Tom is an abandoned tungsten mine. The lowest levels of the mine are accessible by nearly horizontal tunnels from portals in the mining base camp. Drainage (most noticeable in the springs resulting from snow melt) flows (from the mountain top through upper tunnel complex) out of the access tunnel without the need for pumping. While the underground drifts at Yucca Mountain, Nevada, have not yet been considered (since they are relatively shallow for physics experiments), they have undergone extensive earth science research for nearly 10 years, as the site for future storage of nation's spent nuclear fuels. All these underground sites could accommodate different earth science and physics experiments. Most underground physics experiments require depth to reduce the cosmic-ray-induced muon flux from atmospheric sources. Earth science experiments can be

Establishing a laboratory model of dental unit waterlines bacterial biofilms using a CDC biofilm reactor.

Science.gov (United States)

Yoon, Hye Young; Lee, Si Young

2017-11-01

In this study, a laboratory model to reproduce dental unit waterline (DUWL) biofilms was developed using a CDC biofilm reactor (CBR). Bacteria obtained from DUWLs were filtered and cultured in Reasoner's 2A (R2A) for 10 days, and were subsequently stored at -70°C. This stock was cultivated on R2A in batch mode. After culturing for five days, the bacteria were inoculated into the CBR. Biofilms were grown on polyurethane tubing for four days. Biofilm accumulation and thickness was 1.3 × 10 5  CFU cm -2 and 10-14 μm respectively, after four days. Bacteria in the biofilms included cocci and rods of short and medium lengths. In addition, 38 bacterial genera were detected in biofilms. In this study, the suitability and reproducibility of the CBR model for DUWL biofilm formation were demonstrated. The model provides a foundation for the development of bacterial control methods for DUWLs.

Evaluating the effectiveness of a laboratory-based professional development program for science educators

Science.gov (United States)

Amolins, Michael Wayne

The development of effective science educators has been a long-standing goal of the American education system. Numerous studies have suggested a breadth of professional development programs that have sought to utilize constructivist principles in order to orchestrate movement toward student-led, inquiry-based instruction. Very few, however, have addressed a missing link between the modern scientific laboratory and the traditional science classroom. While several laboratory-based training programs have begun to emerge in recent years, the skills necessary to translate this information into the classroom are rarely addressed. The result is that participants are often left without an outlet or the confidence to integrate these into their lessons. The purpose of this study was to examine the effectiveness of a laboratory-based professional development program focused on classroom integration and reformed science teaching principles. This was measured by the ability to invigorate its seven participants in order to achieve higher levels of success and fulfillment in the classroom. These participants all taught at public high schools in South Dakota, including both rural and urban locations, and taught a variety of courses. Participants were selected for this study through their participation in the Sanford Research/USD Science Educator Research Fellowship Program. Through the use of previously collected data acquired by Sanford Research, this study attempted to detail the convergence of three assessments in order to demonstrate the growth and development of its participants. First, pre- and post-program surveys were completed in order to display the personal and professional growth of its participants. Second, pre- and post-program classroom observations employing the Reformed Teaching Observation Protocol allowed for the assessment of pedagogical modifications being integrated by each participant, as well as the success of such modifications in constructively

The Impact of Differentiated Instructional Materials on English Language Learner (ELL) Students' Comprehension of Science Laboratory Tasks

Science.gov (United States)

Manavathu, Marian; Zhou, George

2012-01-01

Through a qualitative research design, this article investigates the impacts of differentiated laboratory instructional materials on English language learners' (ELLs) laboratory task comprehension. The factors affecting ELLs' science learning experiences are further explored. Data analysis reveals a greater degree of laboratory task comprehension…

The Deep Underground Science and Engineering Laboratory at Homestake

Energy Technology Data Exchange (ETDEWEB)

Lesko, Kevin T [Department of Physics, University of California Berkeley and the Institute for Nuclear and Particle Astrophysics, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, MS50R5239, Berkeley, CA 94720-8146 (United States)], E-mail: KTLesko@lbl.gov

2008-11-01

The National Science Foundation and the international underground science community are well into establishing a world-class, multidisciplinary Deep Underground Science and Engineering Laboratory (DUSEL) at the former Homestake mine in Lead South Dakota. The NSF's review committee, following the first two NSF solicitations, selected the Homestake Proposal and site as the prime location to be developed into an international research facility. Homestake DUSEL will provide much needed underground research space to help relieve the worldwide shortage, particularly at great depth, and will develop research campuses at several different depths to satisfy the research requirements for the coming decades. The State of South Dakota has demonstrated remarkable support for the project and has secured the site with the transfer from the Homestake Mining Corp. The State, through its Science and Technology Authority with state funds and those of a philanthropic donor has initiated rehabilitation of the surface and underground infrastructure including the Ross and Yates hoists accessing the 4850 Level (feet below ground, 4100 to 4200 mwe). The scientific case for DUSEL and the progress in establishing the preliminary design of the facility and the associated suite of experiments to be funded along with the facility by the NSF are presented.

Tactical Approaches for Trading Science Objectives Against Measurements and Mission Design: Science Traceability Techniques at the Jet Propulsion Laboratory

Science.gov (United States)

Nash, A. E., III

2017-12-01

The most common approaches to identifying the most effective mission design to maximize science return from a potential set of competing alternative design approaches are often inefficient and inaccurate. Recently, Team-X at the Jet Propulsion Laboratory undertook an effort to improve both the speed and quality of science - measurement - mission design trade studies. We will report on the methodology & processes employed and their effectiveness in trade study speed and quality. Our results indicate that facilitated subject matter expert peers are the keys to speed and quality improvements in the effectiveness of science - measurement - mission design trade studies.

GeoBrain Computational Cyber-laboratory for Earth Science Studies

Science.gov (United States)

Deng, M.; di, L.

2009-12-01

Computational approaches (e.g., computer-based data visualization, analysis and modeling) are critical for conducting increasingly data-intensive Earth science (ES) studies to understand functions and changes of the Earth system. However, currently Earth scientists, educators, and students have met two major barriers that prevent them from being effectively using computational approaches in their learning, research and application activities. The two barriers are: 1) difficulties in finding, obtaining, and using multi-source ES data; and 2) lack of analytic functions and computing resources (e.g., analysis software, computing models, and high performance computing systems) to analyze the data. Taking advantages of recent advances in cyberinfrastructure, Web service, and geospatial interoperability technologies, GeoBrain, a project funded by NASA, has developed a prototype computational cyber-laboratory to effectively remove the two barriers. The cyber-laboratory makes ES data and computational resources at large organizations in distributed locations available to and easily usable by the Earth science community through 1) enabling seamless discovery, access and retrieval of distributed data, 2) federating and enhancing data discovery with a catalogue federation service and a semantically-augmented catalogue service, 3) customizing data access and retrieval at user request with interoperable, personalized, and on-demand data access and services, 4) automating or semi-automating multi-source geospatial data integration, 5) developing a large number of analytic functions as value-added, interoperable, and dynamically chainable geospatial Web services and deploying them in high-performance computing facilities, 6) enabling the online geospatial process modeling and execution, and 7) building a user-friendly extensible web portal for users to access the cyber-laboratory resources. Users can interactively discover the needed data and perform on-demand data analysis and

Dental fear and anxiety in older children: an association with parental dental anxiety and effective pain coping strategies

Directory of Open Access Journals (Sweden)

Coric A

2014-08-01

Full Text Available Anka Coric,1 Adriana Banozic,2 Miro Klaric,3 Katarina Vukojevic,4 Livia Puljak5 1School of Medicine, University of Mostar, Health Center Mostar, Mostar, Bosnia and Herzegovina; 2Laboratory for Pain Research, University of Split School of Medicine, Split, Croatia; 3Department of Psychiatry, School of Medicine, University of Mostar, Mostar, Bosnia and Herzegovina; 4Department of Anatomy, University of Split School of Medicine, Split, Croatia; 5Laboratory for Pain Research, University of Split School of Medicine, Split, Croatia Abstract: An association between dental fear and anxiety (DFA has been confirmed for children younger than 8 years, but this association in older children is less clear. The aim of this study was to fill this knowledge gap by studying DFA in older children and their parents with validated measures. This cross-sectional study, conducted at Community Health Centre Mostar, Bosnia and Herzegovina, included 114 children and their parents. DFA, coping, and sociodemographic variables were studied using Corah Dental Anxiety Questionnaire (CDAS, Dental Subscale of the Children's Fear Survey Schedule (CFSS-DS, Dental Cope Questionnaire, and sociodemographic questionnaire. Maternal CDAS scores had significant positive correlation with child DFA measured with CFSS-DS (r=0.35, P<0.001 and CDAS (r=0.32, P<0.001. Fathers' CDAS scores were not associated with child CFSS-DS, but showed a moderate correlation with child CDAS (r=0.19, P<0.05. There were no significant differences in children's fear and anxiety based on age, sex, or socioeconomic variables. Children used internal coping strategies most frequently and external coping strategies were rated by the children as the most effective. We did not find differences in number and type of effective coping strategies in children with high DFA compared with children with low DFA. In conclusion, there is evidence of the coexistence of dental fear in parents and older children. These findings

Virtual Laboratories in Science Education: Students' Motivation and Experiences in Two Tertiary Biology Courses

Science.gov (United States)

Dyrberg, Nadia Rahbek; Treusch, Alexander H.; Wiegand, Claudia

2017-01-01

Potential benefits of simulations and virtual laboratory exercises in natural sciences have been both theorised and studied recently. This study reports findings from a pilot study on student attitude, motivation and self-efficacy when using the virtual laboratory programme Labster. The programme allows interactive learning about the workflows and…

A Place for Materials Science: Laboratory Buildings and Interdisciplinary Research at the University of Pennsylvania

Science.gov (United States)

Choi, Hyungsub; Shields, Brit

2015-01-01

The Laboratory for Research on the Structure of Matter (LRSM), University of Pennsylvania, was built in 1965 as part of the Advanced Research Projects Agency's (ARPA) Interdisciplinary Laboratories (IDL) program intended to foster interdisciplinary research and training in materials science. The process that led to the construction of the…

Description of the Sandia National Laboratories science, technology & engineering metrics process.

Energy Technology Data Exchange (ETDEWEB)

Jordan, Gretchen B.; Watkins, Randall D.; Trucano, Timothy Guy; Burns, Alan Richard; Oelschlaeger, Peter

2010-04-01

There has been a concerted effort since 2007 to establish a dashboard of metrics for the Science, Technology, and Engineering (ST&E) work at Sandia National Laboratories. These metrics are to provide a self assessment mechanism for the ST&E Strategic Management Unit (SMU) to complement external expert review and advice and various internal self assessment processes. The data and analysis will help ST&E Managers plan, implement, and track strategies and work in order to support the critical success factors of nurturing core science and enabling laboratory missions. The purpose of this SAND report is to provide a guide for those who want to understand the ST&E SMU metrics process. This report provides an overview of why the ST&E SMU wants a dashboard of metrics, some background on metrics for ST&E programs from existing literature and past Sandia metrics efforts, a summary of work completed to date, specifics on the portfolio of metrics that have been chosen and the implementation process that has been followed, and plans for the coming year to improve the ST&E SMU metrics process.

Understanding dental CAD/CAM for restorations--dental milling machines from a mechanical engineering viewpoint. Part B: labside milling machines.

Science.gov (United States)

Lebon, Nicolas; Tapie, Laurent; Duret, Francois; Attal, Jean-Pierre

2016-01-01

Nowadays, dental numerical controlled (NC) milling machines are available for dental laboratories (labside solution) and dental production centers. This article provides a mechanical engineering approach to NC milling machines to help dental technicians understand the involvement of technology in digital dentistry practice. The technical and economic criteria are described for four labside and two production center dental NC milling machines available on the market. The technical criteria are focused on the capacities of the embedded technologies of milling machines to mill prosthetic materials and various restoration shapes. The economic criteria are focused on investment cost and interoperability with third-party software. The clinical relevance of the technology is discussed through the accuracy and integrity of the restoration. It can be asserted that dental production center milling machines offer a wider range of materials and types of restoration shapes than labside solutions, while labside solutions offer a wider range than chairside solutions. The accuracy and integrity of restorations may be improved as a function of the embedded technologies provided. However, the more complex the technical solutions available, the more skilled the user must be. Investment cost and interoperability with third-party software increase according to the quality of the embedded technologies implemented. Each private dental practice may decide which fabrication option to use depending on the scope of the practice.

Use of a Laboratory Field Project in an Introductory Crop Science Course.

Science.gov (United States)

Lane, Robert A.

1986-01-01

Assesses the benefits resulting from a laboratory field project and report for agricultural students in an introductory crop science course. Student responses to evaluation statements indicated that the project helped them identify crops, understand cultural and management practices, and recognize environmental influences that affect crop…

Dental Holography

Science.gov (United States)

Dirtoft, Ingegerd

1983-12-01

Ten years have passed since the first articles appeared in this new field. The qualities of the laser light together with the need of contactless 3-D measurements for different dental purposes seemed to be extremely promising, but still just a few scientists have used the method and mostly for laboratory studies. For some reason there has been a preponderance for orthodontic measurements. This seems to be a bit peculiar from holographic view compared with measurements for engineering purposes, which usually are made on metals. So naturally holography can become a clinical tool for measurements in the field of fixed bridges, removable partial dentures and implants. One of the problems is that the need for holography in dental research must be fulfilled in collaboration with physicists. Only a two-way communication during an entire experiment can balance both technical and odontological demands and thus give practical and clinical important results. The need for an easy way of handling the evaluation to get all required information is another problem and of course the holographic equipment must be converted to a box easy to handle for everyone. At last the position of dental holography today is going to be carefully examined together with an attempt to look into the hopefully exciting and not to utopic future for this research field.

Implementation of new technologies in U.S. dental school curricula.

Science.gov (United States)

Brownstein, Sheri A; Murad, Aseel; Hunt, Ronald J

2015-03-01

With dentistry rapidly evolving as new technologies are developed, this study aimed to identify the penetration of emerging dental technologies into the curricula of U.S. dental schools and to explore whether certain school characteristics affected adoption of these technologies. A 19-question survey was sent to the academic deans of all 62 U.S. dental schools. In addition to questions about characteristics of the school, the survey asked respondents to indicate where in their curricula the technology was incorporated: preclinical didactic, preclinical laboratory, clinical didactic, and/or clinical patient experience. Of 62 eligible schools, 33 useable responses were received, for a 52% response rate. The results showed that the greatest overall penetration of dental technologies was in preclinical didactic courses and the lowest was in the preclinical laboratory. Specific technologies implemented in the largest percentage of responding schools were digital radiography and rotary endodontics. The technologies with the lowest penetration were CAD/CAM denture fabrication and hard tissue lasers. These results suggest that the incorporation of technology into dental schools is following that of private practice as the most widely adopted technologies were those with the greatest acceptance and use in private practice. Among the respondents, factors such as class size and age of the school had greater impact on incorporation of technology than funding source and geographic location.

Evaluating the effectiveness of a laboratory-based professional development program for science educators.

Science.gov (United States)

Amolins, Michael W; Ezrailson, Cathy M; Pearce, David A; Elliott, Amy J; Vitiello, Peter F

2015-12-01

The process of developing effective science educators has been a long-standing objective of the broader education community. Numerous studies have recommended not only depth in a teacher's subject area but also a breadth of professional development grounded in constructivist principles, allowing for successful student-centered and inquiry-based instruction. Few programs, however, have addressed the integration of the scientific research laboratory into the science classroom as a viable approach to professional development. Additionally, while occasional laboratory training programs have emerged in recent years, many lack a component for translating acquired skills into reformed classroom instruction. Given the rapid development and demand for knowledgeable employees and an informed population from the biotech and medical industries in recent years, it would appear to be particularly advantageous for the physiology and broader science education communities to consider this issue. The goal of this study was to examine the effectiveness of a laboratory-based professional development program focused on the integration of reformed teaching principles into the classrooms of secondary teachers. This was measured through the program's ability to instill in its participants elevated academic success while gaining fulfillment in the classroom. The findings demonstrated a significant improvement in the use of student-centered instruction and other reformed methods by program participants as well as improved self-efficacy, confidence, and job satisfaction. Also revealed was a reluctance to refashion established classroom protocols. The combination of these outcomes allowed for construction of an experiential framework for professional development in applied science education that supports an atmosphere of reformed teaching in the classroom. Copyright © 2015 The American Physiological Society.

Colour discrimination of dental professionals and colour deficient laypersons.

Science.gov (United States)

Poljak-Guberina, Renata; Celebic, Asja; Powers, John M; Paravina, Rade D

2011-12-01

The aim of the present study was to compare results of non-dental (conventional) and dental colour discrimination tests (customized, shade guide test), to evaluate influence of profession, gender and age of colour normal dentists and laboratory technicians on colour discrimination results and to evaluate results of colour deficient laypersons. A total of 36 colour normal dental professionals, all volunteers were divided into two groups consisting of 18 participants each: dentists (DDS) and laboratory technicians (CDT). In addition, a group 15 colour deficient males also volunteered (CDP). Colour discrimination was examined using Farnsworth-Munsell 100 Hue Test and total error scores (TES) were calculated. Participants performed a dentistry related colour discrimination test by matching 26 pairs of shade tabs. Shade guide scores (3DS) were calculated. These tests were performed under the controlled conditions of a viewing booth. Mean values and standard deviations were determined. ANOVA, Mann-Whitney test, t-test and Pearson's correlation coefficient (r) were used for result analysis. TES and 3DS were correlated for colour normal observers, r = 0.47 (p gender and age were recorded. TES of 159 (83) and 3DS of 6.7 (2.7) were recorded for colour deficient laypersons. Based on TES, 33% of colour deficient laypersons had average discrimination, whilst 67% had low discrimination. Within the limitation of this study, it was concluded that results of non-dental and dental colour discrimination tests were correlated, and that profession (DDS/CDT), gender and age gender did not influence colour discrimination of colour normal participants. Although colour and appearance of dental restorations are of paramount importance for the aesthetic outcome, colour vision of dental professionals is not routinely tested. This paper validates and recommends the usage of dental shade guides for a simple, affordable and understandable testing of colour vision, either as a sole test or

The Mars Science Laboratory Organic Check Material

Science.gov (United States)

Conrad, Pamela G.; Eigenbrode, J. E.; Mogensen, C. T.; VonderHeydt, M. O.; Glavin, D. P.; Mahaffy, P. M.; Johnson, J. A.

2011-01-01

The Organic Check Material (OCM) has been developed for use on the Mars Science Laboratory mission to serve as a sample standard for verification of organic cleanliness and characterization of potential sample alteration as a function of the sample acquisition and portioning process on the Curiosity rover. OCM samples will be acquired using the same procedures for drilling, portioning and delivery as are used to study martian samples with The Sample Analysis at Mars (SAM) instrument suite during MSL surface operations. Because the SAM suite is highly sensitive to organic molecules, the mission can better verify the cleanliness of Curiosity's sample acquisition hardware if a known material can be processed through SAM and compared with the results obtained from martian samples.

Perceptions of uncivil student behavior in dental education.

Science.gov (United States)

Ballard, Richard W; Hagan, Joseph L; Townsend, Janice A; Ballard, Mary B; Armbruster, Paul C

2015-01-01

Students and faculty members in the health professions classroom are expected to exhibit professional behaviors that are conducive to maintaining a positive learning environment, but there is little published research concerning incivility in the area of dental education. The aim of this study was to evaluate differences in perceptions of incivility between dental faculty and students, between students in different courses of study, and between students in different years of dental study. The study utilized an anonymous electronic survey of all dental faculty and administrators and all dental, dental hygiene, and dental laboratory technology students at a single institution. The survey instrument contained questions concerning perceived uncivil behavior in the classroom and clinical settings. Response rates were 54% for faculty and administrators and ranged from 60% to 97% for students in various years and programs. The results were analyzed based on gender, course of study, year of study, and ethnicity. Significant differences were found regarding perceptions of civil behaviour between faculty and students, male and female students, the year of study, and the course of study. These differences point to the need for further research as well as administrative leadership and faculty development to define guidelines in this area in order to ensure a positive learning environment.

The Los Alamos, Sandia, and Livermore Laboratories: Integration and collaboration solving science and technology problems for the nation

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-01

More than 40 years ago, three laboratories were established to take on scientific responsibility for the nation`s nuclear weapons - Los Alamos, Sandia, and Livermore. This triad of laboratories has provided the state-of-the-art science and technology to create America`s nuclear deterrent and to ensure that the weapons are safe, secure, and to ensure that the weapons are safe, secure, and reliable. These national security laboratories carried out their responsibilities through intense efforts involving almost every field of science, engineering, and technology. Today, they are recognized as three of the world`s premier research and development laboratories. This report sketches the history of the laboratories and their evolution to an integrated three-laboratory system. The characteristics that make them unique are described and some of the major contributions they have made over the years are highlighted.

Experiences in Accreditation of Laboratories in the Field of Radiation Science

International Nuclear Information System (INIS)

Franic, Z.; Galjanic, S.; Krizanec, D.

2011-01-01

Efficient interaction of technical legislation, metrology, standardization and accreditation within the system of quality infrastructure is precondition for assurance of safety of goods and services as well as protection of humans and environment. In the paper importance of quality infrastructure on national and international levels is presented while special interest is paid to accreditation. Current situation regarding the accreditation of laboratories in the field of radiation science is presented. Regarding this field, in Croatia three laboratories are accredited by Croatian Accreditation Agency: 1. Laboratory for Radioecology, Rudjer Boskovic Institute (Scope: Measurement of radionuclide content in environmental samples and commodities - Including foodstuffs and drinking water) 2. EKOTEH Dozimetrija Ltd., Department for Radiation Protection (Scope: Testing in the scope of ionizing and nonionizing radiation) 3. Radiation Protection Unit, Institute for Medical Research and Occupational Health (Scope: Determination of radioactivity). (author)

Dental Calculus Arrest of Dental Caries

OpenAIRE

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human t...

Assessing students' learning outcomes, self-efficacy and attitudes toward the integration of virtual science laboratory in general physics

Science.gov (United States)

Ghatty, Sundara L.

Over the past decade, there has been a dramatic rise in online delivery of higher education in the United States. Recent developments in web technology and access to the internet have led to a vast increase in online courses. For people who work during the day and whose complicated lives prevent them from taking courses on campus, online courses are the only alternatives by which they may achieve their goals in education. The laboratory courses are the major requirements for college and university students who want to pursue degree and certification programs in science. It is noted that there is a lack of laboratory courses in online physics courses. The present study addressed the effectiveness of a virtual science laboratory in physics instruction in terms of learning outcomes, attitudes, and self-efficacy of students in a Historically Black University College. The study included fifty-eight students (36 male and 22 female) of different science majors who were enrolled in a general physics laboratory course. They were divided into virtual and traditional groups. Three experiments were selected from the syllabus. The traditional group performed one experiment in a traditional laboratory, while the virtual group performed the same experiment in a virtual laboratory. For the second experiment, the use of laboratories by both groups was exchanged. Learner's Assessment Test (LAT), Attitudes Toward Physics Laboratories (ATPL), and Self-Efficacy Survey (SES) instruments were used. Additionally, quantitative methods such as an independent t-test, a paired t-test, and correlation statistics were used to analyze the data. The results of the first experiment indicated the learning outcomes were higher in the Virtual Laboratory than in the traditional laboratory, whereas there was no significant difference in learning outcomes with either type of lab instruction. However, significant self-efficacy gains were observed. Students expressed positive attitudes in terms of liking

Science with multiply-charged ions at Brookhaven National Laboratory

International Nuclear Information System (INIS)

Jones, K.W.; Johnson, B.M.; Meron, M.; Thieberger, P.

1987-01-01

The production of multiply-charged heavy ions at Brookhaven National Laboratory and their use in different types of experiments are discussed. The main facilities that are used are the Double MP Tandem Van de Graaff and the National Synchrotron Light Source. The capabilities of a versatile Atomic Physics Facility based on a combination of the two facilities and a possible new heavy-ion storage ring are summarized. It is emphasized that the production of heavy ions and the relevant science necessitates very flexible and diverse apparatus

Preparation for microgravity - The role of the Microgravity Material Science Laboratory

Science.gov (United States)

Johnston, J. Christopher; Rosenthal, Bruce N.; Meyer, Maryjo B.; Glasgow, Thomas K.

1988-01-01

Experiments at the NASA Lewis Research Center's Microgravity Material Science Laboratory using physical and mathematical models to delineate the effects of gravity on processes of scientific and commercial interest are discussed. Where possible, transparent model systems are used to visually track convection, settling, crystal growth, phase separation, agglomeration, vapor transport, diffusive flow, and polymer reactions. Materials studied include metals, alloys, salts, glasses, ceramics, and polymers. Specific technologies discussed include the General Purpose furnace used in the study of metals and crystal growth, the isothermal dendrite growth apparatus, the electromagnetic levitator/instrumented drop tube, the high temperature directional solidification furnace, the ceramics and polymer laboratories and the center's computing facilities.

Psychosocial Aspects of Dental Anxiety and Clinical Pain Phenomena

DEFF Research Database (Denmark)

Moore, Rod

This Danish Doctoral Dissertation in the science of Odontology contains 7 chapters: 1) Introduction to a social perspective on dental treatment, anxiety and pain throughout time, 2) research models and methods to study dental anxiety and clinical pain phenomena, 3) the fear of dental treatment...... .. what it is and what it is not and how many have it, 4) clinical pain treatment, psychosocial aspects in relation to anxiety, 4) patients and dentists' roles, pain perception and anxiety, 6) psychosocial aspects of managing anxiety and pain phenomena, and 7) Conclusions and proposals for the future...

Master in oral biology program: A path to addressing the need for future dental educators.

Science.gov (United States)

Jergenson, Margaret A; Barritt, Laura C; O'Kane, Barbara J; Norton, Neil S

2017-11-01

In dental education, the anatomical sciences, which include gross anatomy, histology, embryology, and neuroanatomy, encompass an important component of the basic science curriculum. At Creighton University School of Dentistry, strength in anatomic science education has been coupled with a solid applicant pool to develop a novel Master of Science in Oral Biology, Anatomic Sciences track degree program. The program provides a heavy emphasis on developing teaching skills in predoctoral students as well as exposure to research processes to encourage the cohort to pursuing a career in academic dentistry. The individuals considered for this program are applicants for admission to the School of Dentistry that have not been accepted into the entering dental class for that year. The students undertake a two year curriculum, studying anatomic sciences with a special emphasis on teaching. The students also must complete a research project that requires a thesis. The students in the program are guaranteed acceptance to dental school upon successful completion of the program. After six years, the first ten students have received their Master of Science degrees and continued in dental school. The program is favorably viewed by the faculty and participating students. It is also considered successful by metrics. Nine of the ten graduates have said they would like to participate in academic dentistry in some capacity during their careers. Anat Sci Educ 10: 607-612. © 2017 American Association of Anatomists. © 2017 American Association of Anatomists.

Mars Science Laboratory Mission and Science Investigation

Science.gov (United States)

Grotzinger, John P.; Crisp, Joy; Vasavada, Ashwin R.; Anderson, Robert C.; Baker, Charles J.; Barry, Robert; Blake, David F.; Conrad, Pamela; Edgett, Kenneth S.; Ferdowski, Bobak; Gellert, Ralf; Gilbert, John B.; Golombek, Matt; Gómez-Elvira, Javier; Hassler, Donald M.; Jandura, Louise; Litvak, Maxim; Mahaffy, Paul; Maki, Justin; Meyer, Michael; Malin, Michael C.; Mitrofanov, Igor; Simmonds, John J.; Vaniman, David; Welch, Richard V.; Wiens, Roger C.

2012-09-01

Scheduled to land in August of 2012, the Mars Science Laboratory (MSL) Mission was initiated to explore the habitability of Mars. This includes both modern environments as well as ancient environments recorded by the stratigraphic rock record preserved at the Gale crater landing site. The Curiosity rover has a designed lifetime of at least one Mars year (˜23 months), and drive capability of at least 20 km. Curiosity's science payload was specifically assembled to assess habitability and includes a gas chromatograph-mass spectrometer and gas analyzer that will search for organic carbon in rocks, regolith fines, and the atmosphere (SAM instrument); an x-ray diffractometer that will determine mineralogical diversity (CheMin instrument); focusable cameras that can image landscapes and rock/regolith textures in natural color (MAHLI, MARDI, and Mastcam instruments); an alpha-particle x-ray spectrometer for in situ determination of rock and soil chemistry (APXS instrument); a laser-induced breakdown spectrometer to remotely sense the chemical composition of rocks and minerals (ChemCam instrument); an active neutron spectrometer designed to search for water in rocks/regolith (DAN instrument); a weather station to measure modern-day environmental variables (REMS instrument); and a sensor designed for continuous monitoring of background solar and cosmic radiation (RAD instrument). The various payload elements will work together to detect and study potential sampling targets with remote and in situ measurements; to acquire samples of rock, soil, and atmosphere and analyze them in onboard analytical instruments; and to observe the environment around the rover. The 155-km diameter Gale crater was chosen as Curiosity's field site based on several attributes: an interior mountain of ancient flat-lying strata extending almost 5 km above the elevation of the landing site; the lower few hundred meters of the mountain show a progression with relative age from clay-bearing to sulfate

Filter Strategies for Mars Science Laboratory Orbit Determination

Science.gov (United States)

Thompson, Paul F.; Gustafson, Eric D.; Kruizinga, Gerhard L.; Martin-Mur, Tomas J.

2013-01-01

The Mars Science Laboratory (MSL) spacecraft had ambitious navigation delivery and knowledge accuracy requirements for landing inside Gale Crater. Confidence in the orbit determination (OD) solutions was increased by investigating numerous filter strategies for solving the orbit determination problem. We will discuss the strategy for the different types of variations: for example, data types, data weights, solar pressure model covariance, and estimating versus considering model parameters. This process generated a set of plausible OD solutions that were compared to the baseline OD strategy. Even implausible or unrealistic results were helpful in isolating sensitivities in the OD solutions to certain model parameterizations or data types.

Evaluation of dental solid waste in Hamedan

Directory of Open Access Journals (Sweden)

Nabizadeh R.

2009-08-01

Full Text Available "nBackground and Aim: Today, one of the most important environmental issues is dental solid wastes which are of great importance because of the presence of hazardous, toxic and pathogen agents. In this survey, solid waste produced in Hamedan general dental offices is evaluated. "nMaterials and Methods: In this descriptive study, from 104 general dental offices in Hamedan , 10 offices were selected in simple random way. From each offices, 3 sample at the end of successive working day (Sunday, Monday and Tuesday were analyzed. Samples were manually sorted into different 74 components and measured by means of laboratory scale. Then, measured components were classified in the basis of characteristic and hazardous potential as well as material type. "nResults: Total annual waste produced in general dental offices in Hamadan is 14662.67 Kg (9315.45>95.0% Confidence Interval>20009.88. Production percentages of infectious, domestic type, chemical and pharmaceutical and toxic wastes were 51.93, 38.16, 9.47, 0.44 respectively. Main components of produced dental waste were 14 components that consist of more than 80 percents of total dental solid waste. So, waste reduction, separation and recycling plans in the offices must be concentrated on these main components. "nConclusion: In order to dental waste proper management, it is suggested that in addition to educate dentists for waste reduction, separation and recycling in the offices, each section of dental waste(toxic,chemical and pharmaceutical, infectious and domestic type wastes separately and according to related criteria should be managed.

Beam line 4: A dedicated surface science facility at Daresbury Laboratory

International Nuclear Information System (INIS)

Dhanak, V.R.; Robinson, A.W.; van der Laan, G.; Thornton, G.

1992-01-01

We describe a beam line currently under construction at the Daresbury Laboratory which forms part of a surface science research facility for the Interdisciplinary Research Centre in Surface Science. The beam line has three branches, two of which are described here. The first branch covers the high-energy range 640 eV≤hν≤10 keV, being equipped with a double-crystal monochromator and a novel multicoated premirror system. The second branch line is optimized for the energy range 15≤hν≤250 eV, using cylindrical focusing mirrors, a spherical diffraction grating and an ellipsoidal refocusing mirror to achieve high resolution with a small spot size

FACTORS INFLUENCING THE SELECTION OF DENTAL NURSING ...

African Journals Online (AJOL)

drclement

to 85 dental nursing students from 3. Colleges ... products of mixed school. Teaching was the commonest job among 27.1% .... Social Science (SPSS version 15.0) ... Frequency Percent. Educational status. Father. Informal. 6. 7.1. Primary. 10.

Learning Environment, Attitudes and Achievement among Middle-School Science Students Using Inquiry-Based Laboratory Activities

Science.gov (United States)

Wolf, Stephen J.; Fraser, Barry J.

2008-01-01

This study compared inquiry and non-inquiry laboratory teaching in terms of students' perceptions of the classroom learning environment, attitudes toward science, and achievement among middle-school physical science students. Learning environment and attitude scales were found to be valid and related to each other for a sample of 1,434 students in…

Center for Materials Science, Los Alamos National Laboratory. Status report, October 1, 1990--September 30, 1991

International Nuclear Information System (INIS)

Parkin, D.M.; Boring, A.M.

1991-01-01

This report summarizes the progress of the Center for Materials Science (CMS) from October 1, 1990 to September 30, 1991, and is the nineth such annual report. It has been a year of remarkable progress in building the programs of the Center. The extent of this progress is described in detail. The CMS was established to enhance the contribution of materials science and technology to the Laboratory's defense, energy and scientific missions, and the Laboratory. In carrying out these responsibilities it has accepted four demanding missions: (1) Build a core group of highly rated, established materials scientists and solid state physicists. (2) Promote and support top quality, interdisciplinary materials research programs at Los Alamos. (3) Strengthen the interactions of materials science and Los Alamos with the external materials science community. and (4) Establish and maintain modern materials research facilities in a readily accessible, central location

Biomedical and environmental sciences programs at the Oak Ridge National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Richmond, C.R.; Johnson, C.A.

1988-02-01

This progress report summarizes the research and development activities conducted in the Biomedical and Environmental Sciences Programs of Oak Ridge National Laboratory. The report is structured to provide descriptions of current activities and accomplishments in each of the major organizational units. Following the accounts of research programs, is a list of publications and awards to its members. 6 figs., 14 tabs.

Biomedical and environmental sciences programs at the Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Richmond, C.R.; Johnson, C.A.

1988-02-01

This progress report summarizes the research and development activities conducted in the Biomedical and Environmental Sciences Programs of Oak Ridge National Laboratory. The report is structured to provide descriptions of current activities and accomplishments in each of the major organizational units. Following the accounts of research programs, is a list of publications and awards to its members. 6 figs., 14 tabs

Utilization of dental health care services in context of the HIV epidemic- a cross-sectional study of dental patients in the Sudan.

Science.gov (United States)

Nasir, Elwalid Fadul; Astrøm, Anne Nordrehaug; David, Jamil; Ali, Raouf Wahab

2009-11-16

HIV infected patients should be expected in the Sudanese dental health care services with an increasing frequency. Dental care utilization in the context of the HIV epidemic is generally poorly understood. Focusing on Sudanese dental patients with reported unknown HIV status, this study assessed the extent to which Andersen's model in terms of predisposing (socio-demographics), enabling (knowledge, attitudes and perceived risk related to HIV) and need related factors (oral health status) predict dental care utilization. It was hypothesized that enabling factors would add to the explanation of dental care utilization beyond that of predisposing and need related factors. Dental patients were recruited from Khartoum Dental Teaching Hospital (KDTH) and University of Science and Technology (UST) during March-July 2008. A total of 1262 patients (mean age 30.7, 56.5% females and 61% from KDTH) were examined clinically (DMFT) and participated in an interview. A total of 53.9% confirmed having attended a dental clinic for treatment at least once in the past 2 years. Logistic regression analysis revealed that predisposing factors; travelling inside Sudan (OR = 0.5) were associated with lower odds and females were associated with higher odds (OR = 2.0) for dental service utilization. Enabling factors; higher knowledge of HIV transmission (OR = 0.6) and higher HIV related experience (OR = 0.7) were associated with lower odds, whereas positive attitudes towards infected people and high perceived risk of contagion (OR = 1.3) were associated with higher odds for dental care utilization. Among need related factors dental caries experience was strongly associated with dental care utilization (OR = 4.8). Disparity in the history of dental care utilization goes beyond socio-demographic position and need for dental care. Public awareness of HIV infection control and confidence on the competence of dentists should be improved to minimize avoidance behaviour and help establish dental

Mars Science Laboratory Heatshield Flight Data Analysis

Science.gov (United States)

Mahzari, Milad; White, Todd

2017-01-01

NASA Mars Science Laboratory (MSL), which landed the Curiosity rover on the surface of Mars on August 5th, 2012, was the largest and heaviest Mars entry vehicle representing a significant advancement in planetary entry, descent and landing capability. Hypersonic flight performance data was collected using MSLs on-board sensors called Mars Entry, Descent and Landing Instrumentation (MEDLI). This talk will give an overview of MSL entry and a description of MEDLI sensors. Observations from flight data will be examined followed by a discussion of analysis efforts to reconstruct surface heating from heatshields in-depth temperature measurements. Finally, a brief overview of MEDLI2 instrumentation, which will fly on NASAs Mars2020 mission, will be presented with a discussion on how lessons learned from MEDLI data affected the design of MEDLI2 instrumentation.

Gamification in Science Education: Gamifying Learning of Microscopic Processes in the Laboratory

Science.gov (United States)

Fleischmann, Katja; Ariel, Ellen

2016-01-01

Understanding and trouble-shooting microscopic processes involved in laboratory tests are often challenging for students in science education because of the inability to visualize the different steps and the various errors that may influence test outcome. The effectiveness of gamification or the use of game design elements and game-mechanics were…

Earth Science Research in DUSEL; a Deep Underground Science and Engineering Laboratory in the United States

Science.gov (United States)

Fairhurst, C.; Onstott, T. C.; Tiedje, J. M.; McPherson, B.; Pfiffner, S. M.; Wang, J. S.

2004-12-01

A summary of efforts to create one or more Deep Underground Science and Engineering Laboratories (DUSEL) in the United States is presented. A workshop in Berkeley, August 11-14, 2004, explored the technical requirements of DUSEL for research in basic and applied geological and microbiological sciences, together with elementary particle physics and integrated education and public outreach. The workshop was organized by Bernard Sadoulet, an astrophysicist and the principal investigator (PI) of a community-wide DUSEL program evolving in coordination with the National Science Foundation. The PI team has three physicists (in nuclear science, high-energy physics, and astrophysics) and three earth scientists (in geoscience, biology and engineering). Presentations, working group reports, links to previous workshop/meeting talks, and information about DUSEL candidate sites, are presented in http://neutrino.lbl.gov/DUSELS-1. The Berkeley workshop is a continuation of decades of efforts, the most recent including the 2001 Underground Science Conference's earth science and geomicrobiology workshops, the 2002 International Workshop on Neutrino and Subterranean Science, and the 2003 EarthLab Report. This perspective (from three earth science co-PIs, the lead author of EarthLab report, the lead scientist of education/outreach, and the local earth science organizer) is to inform the community on the status of this national initiative, and to invite their active support. Having a dedicated facility with decades-long, extensive three-dimensional underground access was recognized as the most important single attribute of DUSEL. Many research initiatives were identified and more are expected as the broader community becomes aware of DUSEL. Working groups were organized to evaluate hydrology and coupled processes; geochemistry; rock mechanics/seismology; applications (e.g., homeland security, environment assessment, petroleum recovery, and carbon sequestration); geomicrobiology and

Environmental Sciences Division Toxicology Laboratory standard operating procedures

International Nuclear Information System (INIS)

Kszos, L.A.; Stewart, A.J.; Wicker, L.F.; Logsdon, G.M.

1989-09-01

This document was developed to provide the personnel working in the Environmental Sciences Division's Toxicology Laboratory with documented methods for conducting toxicity tests. The document consists of two parts. The first part includes the standard operating procedures (SOPs) that are used by the laboratory in conducting toxicity tests. The second part includes reference procedures from the US Environmental Protection Agency document entitled Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms, upon which the Toxicology Laboratory's SOPs are based. Five of the SOPs include procedures for preparing Ceriodaphnia survival and reproduction test. These SOPs include procedures for preparing Ceriodaphnia food (SOP-3), maintaining Ceriodaphnia cultures (SOP-4), conducting the toxicity test (SOP-13), analyzing the test data (SOP-13), and conducting a Ceriodaphnia reference test (SOP-15). Five additional SOPs relate specifically to the fathead minnow (Pimephales promelas) larval survival and growth test: methods for preparing fathead minnow larvae food (SOP-5), maintaining fathead minnow cultures (SOP-6), conducting the toxicity test (SOP-9), analyzing the test data (SOP-12), and conducting a fathead minnow reference test (DOP-14). The six remaining SOPs describe methods that are used with either or both tests: preparation of control/dilution water (SOP-1), washing of glassware (SOP-2), collection and handling of samples (SOP-7), preparation of samples (SOP-8), performance of chemical analyses (SOP-11), and data logging and care of technical notebooks (SOP-16)

Pacific Northwest Laboratory annual report for 1993 to the DOE Office of Energy Research. Part 2: Environmental sciences

Energy Technology Data Exchange (ETDEWEB)

1994-04-01

This 1993 Annual Report from Pacific Northwest Laboratory (PNL) to the US DOE describes research in environment and health conducted during fiscal year (FY) 1993. The report is divided into four parts, each in a separate volume. This part, Volume 2, covers Environmental Sciences. The research is directed toward developing a fundamental understanding of subsurface and terrestrial systems as a basis for both managing these critical resources and addressing environmental problems such as environmental restoration and global change. There are sections on Subsurface Science, Terrestrial Science, Technology Transfer, Interactions with Educational Institutions, and Laboratory Directed Research and Development.

Moving Liquids with Sound: The Physics of Acoustic Droplet Ejection for Robust Laboratory Automation in Life Sciences.

Science.gov (United States)

Hadimioglu, Babur; Stearns, Richard; Ellson, Richard

2016-02-01

Liquid handling instruments for life science applications based on droplet formation with focused acoustic energy or acoustic droplet ejection (ADE) were introduced commercially more than a decade ago. While the idea of "moving liquids with sound" was known in the 20th century, the development of precise methods for acoustic dispensing to aliquot life science materials in the laboratory began in earnest in the 21st century with the adaptation of the controlled "drop on demand" acoustic transfer of droplets from high-density microplates for high-throughput screening (HTS) applications. Robust ADE implementations for life science applications achieve excellent accuracy and precision by using acoustics first to sense the liquid characteristics relevant for its transfer, and then to actuate transfer of the liquid with customized application of sound energy to the given well and well fluid in the microplate. This article provides an overview of the physics behind ADE and its central role in both acoustical and rheological aspects of robust implementation of ADE in the life science laboratory and its broad range of ejectable materials. © 2015 Society for Laboratory Automation and Screening.

Terrain Safety Assessment in Support of the Mars Science Laboratory Mission

Science.gov (United States)

Kipp, Devin

2012-01-01

In August 2012, the Mars Science Laboratory (MSL) mission will pioneer the next generation of robotic Entry, Descent, and Landing (EDL) systems by delivering the largest and most capable rover to date to the surface of Mars. The process to select the MSL landing site took over five years and began with over 50 initial candidate sites from which four finalist sites were chosen. The four finalist sites were examined in detail to assess overall science merit, EDL safety, and rover traversability on the surface. Ultimately, the engineering assessments demonstrated a high level of safety and robustness at all four finalist sites and differences in the assessment across those sites were small enough that neither EDL safety nor rover traversability considerations could significantly discriminate among the final four sites. Thus the MSL landing site at Gale Crater was selected from among the four finalists primarily on the basis of science considerations.

Communicate science: an example of food related hands-on laboratory approach

Science.gov (United States)

D'Addezio, Giuliana; Marsili, Antonella; Vallocchia, Massimiliano

2014-05-01

The Laboratorio Didattica e Divulgazione Scientifica of the Istituto Nazionale di Geofisica e Vulcanologia (INGV's Educational and Outreach Laboratory) organized activity with kids to convey scientific knowledge and to promote research on Earth Science, focusing on volcanic and seismic hazard. The combination of games and learning in educational activity can be a valuable tool for study of complex phenomena. Hands-on activity may help in engage kids in a learning process through direct participation that significantly improves the learning performance of children. Making learning fun motivate audience to pay attention on and stay focused on the subject. We present the experience of the hand-on laboratory "Laboratorio goloso per bambini curiosi di scienza (a delicious hands-on laboratory for kids curious about science)", performed in Frascati during the 2013 European Researchers' Night, promoted by the European Commission, as part of the program organized by the Laboratorio Didattica e Divulgazione Scientifica in the framework of Associazione Frascati Scienza (http://www.frascatiscienza.it/). The hand-on activity were designed for primary schools to create enjoyable and unusual tools for learning Earth Science. During this activity kids are involved with something related to everyday life, such as food, through manipulation, construction and implementation of simple experiments related to Earth dynamics. Children become familiar with scientific concepts such as composition of the Earth, plates tectonic, earthquakes and seismic waves propagation and experience the effect of earthquakes on buildings, exploring their important implications for seismic hazard. During the activity, composed of several steps, participants were able to learn about Earth inner structure, fragile lithosphere, waves propagations, impact of waves on building ecc.., dealing with eggs, cookies, honey, sugar, polenta, flour, chocolate, candies, liquorice sticks, bread, pudding and sweets. The

Behavioral Economic Laboratory Research in Tobacco Regulatory Science.

Science.gov (United States)

Tidey, Jennifer W; Cassidy, Rachel N; Miller, Mollie E; Smith, Tracy T

2016-10-01

Research that can provide a scientific foundation for the United States Food and Drug Administration (FDA) tobacco policy decisions is needed to inform tobacco regulatory policy. One factor that affects the impact of a tobacco product on public health is its intensity of use, which is determined, in part, by its abuse liability or reinforcing efficacy. Behavioral economic tasks have considerable utility for assessing the reinforcing efficacy of current and emerging tobacco products. This paper provides a narrative review of several behavioral economic laboratory tasks and identifies important applications to tobacco regulatory science. Behavioral economic laboratory assessments, including operant self-administration, choice tasks and purchase tasks, can be used generate behavioral economic data on the effect of price and other constraints on tobacco product consumption. These tasks could provide an expedited simulation of the effects of various tobacco control policies across populations of interest to the FDA. Tobacco regulatory research questions that can be addressed with behavioral economic tasks include assessments of the impact of product characteristics on product demand, assessments of the abuse liability of novel and potential modified risk tobacco products (MRTPs), and assessments of the impact of conventional and novel products in vulnerable populations.

The Science on Saturday Program at Princeton Plasma Physics Laboratory

Science.gov (United States)

Bretz, N.; Lamarche, P.; Lagin, L.; Ritter, C.; Carroll, D. L.

1996-11-01

The Science on Saturday Program at Princeton Plasma Physics Laboratory consists of a series of Saturday morning lectures on various topics in science by scientists, engineers, educators, and others with an interesting story. This program has been in existence for over twelve years and has been advertised to and primarily aimed at the high school level. Topics ranging from superconductivity to computer animation and gorilla conservation to pharmaceutical design have been covered. Lecturers from the staff of Princeton, Rutgers, AT and T, Bristol Meyers Squibb, and many others have participated. Speakers have ranged from Nobel prize winners, astronauts, industrialists, educators, engineers, and science writers. Typically, there are eight to ten lectures starting in January. A mailing list has been compiled for schools, science teachers, libraries, and museums in the Princeton area. For the past two years AT and T has sponsored buses for Trenton area students to come to these lectures and an effort has been made to publicize the program to these students. The series has been very popular, frequently overfilling the 300 seat PPPL auditorium. As a result, the lectures are videotaped and broadcast to a large screen TV for remote viewing. Lecturers are encouraged to interact with the audience and ample time is provided for questions.

LIB LAB the Library Laboratory: hands-on multimedia science communication

Science.gov (United States)

Fillo, Aaron; Niemeyer, Kyle

2017-11-01

Teaching scientific research topics to K-12 audiences in an engaging and meaningful way does not need to be hard; with the right insight and techniques it can be fun to encourage self-guided STEAM (science, technology, engineering, arts, and mathematics) exploration. LIB LAB, short for Library Laboratory, is an educational video series produced by Aaron J. Fillo at Oregon State University in partnership with the Corvallis-Benton County Public Library targeted at K-12 students. Each episode explores a variety of scientific fundamentals with playful experiments and demonstrations. The video lessons are developed using evidence-based practices such as dispelling misconceptions, and language immersion. Each video includes directions for a related experiment that young viewers can conduct at home. In addition, science kits for these at-home experiments are distributed for free to students through the public library network in Benton County, Oregon. This talk will focus on the development of multimedia science education tools and several techniques that scientists can use to engage with a broad audience more effectively. Using examples from the LIB LAB YouTube Channel and collection of hands-on science demonstrations and take-home kits, this talk will present STEAM education in action. Corvallis-Benton County Public Library.

Use of simulators in operative dental education: experience in ...

African Journals Online (AJOL)

tices relating to teaching and learning of dental clinical skills in southern Nigeria. Methods: A ... Key words: Simulators, Dentistry, Clinical skills laboratories, Dentistry, Simulators ..... tronic journal of rural and remote health research, ed- ucation ...

Canadian dental students' perceptions of stress.

Science.gov (United States)

Muirhead, Vanessa; Locker, David

2007-05-01

In this paper, we report the results of a survey on dental student stress carried out in April 2005. A questionnaire was used to collect data from 171 students (62% response rate). Identified stressors were academic, clinic-related, social and financial. "Examination and grades" produced the most academic stress, and inconsistent feedback from instructors created the most clinic-related stress. Students found that having a dual role--wife or husband and dental student--was the most burdensome social stressor. Approximately 60% of students reported marital problems and stress associated with "relations with members of the opposite sex." Survey results showed that students who expected a high graduating debt had higher total and academic stress scores. Total stress was not related to age, gender or marital status. Students living with parents during term time had significantly higher total stress scores than students living in other arrangements. Students residing with parents also had significantly higher debts on entry to dental school. Students with more predental education had (non-significantly) lower stress scores but also had higher student debts. Undergraduate subject major (biological science or non-science) had no bearing on reported stress. This study highlights the negative effects of student debt, the necessity for staff training and the need for further studies exploring relations among stress, psychological well-being and academic performance.

Chemistry as the defining science: discipline and training in nineteenth-century chemical laboratories.

Science.gov (United States)

Jackson, Catherine M

2011-06-01

The institutional revolution has become a major landmark of late-nineteenth century science, marking the rapid construction of large, institutional laboratories which transformed scientific training and practice. Although it has served historians of physics well, the institutional revolution has proved much more contentious in the case of chemistry. I use published sources, mainly written by chemists and largely focused on laboratories built in German-speaking lands between about 1865 and 1900, to show that chemical laboratory design was inextricably linked to productive practice, large-scale pedagogy and disciplinary management. I argue that effective management of the novel risks inherent in teaching and doing organic synthesis was significant in driving and shaping the construction of late-nineteenth century institutional chemical laboratories, and that these laboratories were essential to the disciplinary development of chemistry. Seen in this way, the laboratory necessarily becomes part of the material culture of late-nineteenth century chemistry, and I show how this view leads not only to a revision of what is usually known as the laboratory revolution in chemistry but also to a new interpretation of the institutional revolution in physics. Copyright © 2011 Elsevier Ltd. All rights reserved.

SensInDenT-Noncontact Sensors Integrated Into Dental Treatment Units.

Science.gov (United States)

Teichmann, Daniel; Teichmann, Maren; Weitz, Philippe; Wolfart, Stefan; Leonhardt, Steffen; Walter, Marian

2017-02-01

This paper presents the first system design (SensInDenT) for noncontact cardiorespiratory monitoring during dental treatment. The system is integrated into a dental treatment unit, and combines sensors based on electromagnetic, optical, and mechanical coupling at different sensor locations. The measurement principles and circuits are described and a system overview is presented. Furthermore, a first proof of concept is provided by taking measurements in healthy volunteers under laboratory conditions.

76 FR 63615 - Environmental Science Center Microbiology Laboratory; Notice of Public Meeting

Science.gov (United States)

2011-10-13

...The U.S. EPA invites interested stakeholders to participate in a laboratory-based technical workshop that will focus on the conduct of the Association of Official Analytical Chemists (AOAC) Use-dilution method (UDM) and the status and implementation of a new test method, the Organization for Economic Cooperation and Development (OECD) Quantitative Method for Evaluating Bactericidal Activity of Microbicides Used on Hard, Non-Porous Surfaces. The workshop is being held to discuss current and proposed revisions mainly associated with the Staphyloccocus aureus and Pseudomonas aeruginosa methodologies. The goals of the workshop are to provide a comprehensive review and discussion period on the status of the UDM and OEDC methods integrated with hands-on laboratory demonstrations. An overview of various data sets and collaborative studies will be used to supplement the discussions which will be held at the EPA Environmental Science Center Microbiology Laboratory.

Influence of Mothers’ Dental Anxiety and Perception of Child’s OHRQoL Towards Utilization of Dental Services − A Questionnaire Study

Directory of Open Access Journals (Sweden)

Kruthika Murali

2017-01-01

Full Text Available Introduction: Dental caries is one of the most common oral health problems in childhood. As a child depends entirely on the parents, its dental visit could be influenced by various psychosocial factors such as parental perceptions of the child’s oral health and maternal anxiety. Aim: To assess the influence of children’s clinical condition, mothers’ dental anxiety and their use of dental services, maternal perception of child’s oral health-related quality of life (OHRQoL on the child’s utilization of dental services. Materials and Methods: A cross-sectional survey was conducted among 600 mothers of children between 2 and 5 years of age. The questionnaire included the background characteristics, mothers and child’s dental visit, mothers’ dental anxiety using Corah’s Dental Anxiety Scale and maternal perceptions of the child’s OHRQoL using Early Childhood Oral Health Impact Scale. Clinical examination for assessing the dental caries among the children was performed. The data were analyzed using the Statistical Package for the Social Sciences version 17.1 software. Results: Using the final model of Poisson regression analysis with robust variance and forward stepwise procedure, it was found that the age of mother, the age of child, the income of the family, poor OHRQoL, the presence of caries and pain in child significantly influenced the visit of the child to dentist (P ≤ 0.05. No statistically significant association was found between the anxiety of mother and the child’s visit. Conclusion: Lack of maternal knowledge, low socio-economic reasons and maternal perception of child’s oral health could be the important reasons for a child’s less number of dental visits.

75 FR 33169 - Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation...

Science.gov (United States)

2010-06-11

.... FDA-2008-N-0163] (formerly Docket No. 2001N-0067) RIN 0910-AG21 Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation of Special Controls for Dental Amalgam... the Federal Register of August 4, 2009 (74 FR 38686) which classified dental amalgam as a class II...

Substitution of strontium for calcium in glass ionomer cements (Part ...

African Journals Online (AJOL)

Objectives: To investigate the effects of substituting strontium for calcium in fluoroaluminosilicate glass on the mechanical and ion-releasing properties of high-viscosity glass ionomer cements. Design: An exploratory, laboratory-based study. Setting: Dental biomaterials research laboratory, Dental Physical Sciences Unit, ...

PRINCIPLES OF HEAT STERILIZATION IN DENTAL PRACTICE

African Journals Online (AJOL)

PRINCIPLES OF HEAT STERILIZATION. IN DENTAL PRACTICE. W.H. van Palenstein Helderman. Department of Community and Preventive Dentistry,. Faculty of Dentistry, Muhimbili University College of Health Sciences,. Dar es Salaam, Tanzania. Introduction. Sterilization is defined as the destruction of all forms of life ...

Developing Critical Thinking Skills Using the Science Writing Heuristic in the Chemistry Laboratory

Science.gov (United States)

Stephenson, N. S.; Sadler-McKnight, N. P.

2016-01-01

The Science Writing Heuristic (SWH) laboratory approach is a teaching and learning tool which combines writing, inquiry, collaboration and reflection, and provides scaffolding for the development of critical thinking skills. In this study, the California Critical Thinking Skills Test (CCTST) was used to measure the critical thinking skills of…

Dental health economics and diagnosis related groups/casemix in Indonesian dentistry

Directory of Open Access Journals (Sweden)

Ronnie Rivany

2009-12-01

Full Text Available Background: Dental Health Economics is a branch of transdiciplinary science that refers to the Economic and Public Health science. On the other hand, in other developed countries, Diagnosis Related Groups (DRG’s /Casemix has been used as a basic in creating the same perception between providers, patients and insurance companies in many aspects such as health planning, healthcare financing and quality assurance. Purpose: The objective of this review is to propose a new paradigm of economics to be applied in Indonesian Dentistry. Reviews: The Dental Health Economics should be considered as an important aspect in Indonesian Dentistry, which is used to determine the dental treatment fee based on unit cost, cost containment, and cost recovery rate analysis. Referring to Australian Refined Diagnosis Related Group, health care industry in Indonesia has starting to try a more structured way in grouping disease pattern in order to come up with more precise health care services to their patients. The on going development of Indonesian DRG’s is meant to confirm the disease pattern and partition. Conclusion: The development of Indonesian DRG’s concept, especially the Dental & Oral Disorders, needs a new paradigm, so the practitioners and academics could group and calculate the unit cost from each dental treatment according to the Indonesian DRG version (INA-DRG’s.

Looking Back to Move Ahead: Interprofessional Education in Dental Education.

Science.gov (United States)

Hamil, Lindsey M

2017-08-01

Interprofessional education (IPE) is a widely recognized and critical component of dental and health professions education and is included in two of the predoctoral education standards required by the Commission on Dental Accreditation (CODA). Following a review of the literature on the state of IPE education in U.S. dental education programs, this article revisits six institutions identified in previous research as exemplars successfully implementing IPE on their campuses. Interviews were conducted with leaders at the following programs: Columbia University, Medical University of South Carolina, University of Colorado Anschutz Medical Campus, University of Florida, University of Minnesota, and Western University of Health Sciences. Strengths and weakness of IPE in dental education are discussed, along with opportunities for the future including reducing barriers to scheduling, increasing intraprofessional education, and consistent outcomes assessment. The article concludes with lessons learned by administrators and suggestions for improving incorporation of these requirements into predoctoral dental education programs by emphasizing the importance of IPE and dentistry's role in overall health. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Obesity and dental caries: systematic review.

Science.gov (United States)

Silva, Alexandre Emidio Ribeiro; Menezes, Ana Maria Baptista; Demarco, Flávio Fernando; Vargas-Ferreira, Fabiana; Peres, Marco Aurélio

2013-08-01

Identifying, through a systematic literature review, evidence of a possible association between obesity and dental caries. A search of articles published between 2005 and January 2012 was performed in the Medline/PubMed, LILACS and Web of Science databases. The quality of scientific evidence of the selected articles was assessed by the items proposed for observational studies in the Downs & Black instrument. Initially, 537 references were found; after checking the titles and abstracts by two independent researchers, twenty-eight articles were selected for complete reading. Ten of them that assessed the primary and/or permanent dentition observed a positive association between obesity and dental caries and one study found an inverse association. According to the Downs & Black classification, thirteen articles with good scientific evidence were found. The present review did not find sufficient evidence regarding the association between obesity and dental caries, and it did not clarify the possible role of diet and other possible effect modifiers on this association.

Obesity and dental caries: systematic review

Directory of Open Access Journals (Sweden)

Alexandre Emidio Ribeiro Silva

2013-08-01

Full Text Available OBJECTIVE Identifying, through a systematic literature review, evidence of a possible association between obesity and dental caries. METHODS A search of articles published between 2005 and January 2012 was performed in the Medline/PubMed, LILACS and Web of Science databases. The quality of scientific evidence of the selected articles was assessed by the items proposed for observational studies in the Downs & Black instrument. RESULTS Initially, 537 references were found; after checking the titles and abstracts by two independent researchers, twenty-eight articles were selected for complete reading. Ten of them that assessed the primary and/or permanent dentition observed a positive association between obesity and dental caries and one study found an inverse association. According to the Downs & Black classification, thirteen articles with good scientific evidence were found. CONCLUSIONS The present review did not find sufficient evidence regarding the association between obesity and dental caries, and it did not clarify the possible role of diet and other possible effect modifiers on this association.

A new method to extract dental pulp DNA: application to universal detection of bacteria.

Directory of Open Access Journals (Sweden)

Lam Tran-Hung

Full Text Available BACKGROUND: Dental pulp is used for PCR-based detection of DNA derived from host and bacteremic microorganims. Current protocols require odontology expertise for proper recovery of the dental pulp. Dental pulp specimen exposed to laboratory environment yields contaminants detected using universal 16S rDNA-based detection of bacteria. METHODOLOGY/PRINCIPAL FINDINGS: We developed a new protocol by encasing decontaminated tooth into sterile resin, extracting DNA into the dental pulp chamber itself and decontaminating PCR reagents by filtration and double restriction enzyme digestion. Application to 16S rDNA-based detection of bacteria in 144 teeth collected in 86 healthy people yielded a unique sequence in only 14 teeth (9.7% from 12 individuals (14%. Each individual yielded a unique 16S rDNA sequence in 1-2 teeth per individual. Negative controls remained negative. Bacterial identifications were all confirmed by amplification and sequencing of specific rpoB sequence. CONCLUSIONS/SIGNIFICANCE: The new protocol prevented laboratory contamination of the dental pulp. It allowed the detection of bacteria responsible for dental pulp colonization from blood and periodontal tissue. Only 10% such samples contained 16S rDNA. It provides a new tool for the retrospective diagnostic of bacteremia by allowing the universal detection of bacterial DNA in animal and human, contemporary or ancient tooth. It could be further applied to identification of host DNA in forensic medicine and anthropology.

Dental Amalgam

Science.gov (United States)

... Products and Medical Procedures Dental Devices Dental Amalgam Dental Amalgam Share Tweet Linkedin Pin it More sharing options Linkedin Pin it Email Print Dental amalgam is a dental filling material which is ...

BioVeL: a virtual laboratory for data analysis and modelling in biodiversity science and ecology.

Science.gov (United States)

Hardisty, Alex R; Bacall, Finn; Beard, Niall; Balcázar-Vargas, Maria-Paula; Balech, Bachir; Barcza, Zoltán; Bourlat, Sarah J; De Giovanni, Renato; de Jong, Yde; De Leo, Francesca; Dobor, Laura; Donvito, Giacinto; Fellows, Donal; Guerra, Antonio Fernandez; Ferreira, Nuno; Fetyukova, Yuliya; Fosso, Bruno; Giddy, Jonathan; Goble, Carole; Güntsch, Anton; Haines, Robert; Ernst, Vera Hernández; Hettling, Hannes; Hidy, Dóra; Horváth, Ferenc; Ittzés, Dóra; Ittzés, Péter; Jones, Andrew; Kottmann, Renzo; Kulawik, Robert; Leidenberger, Sonja; Lyytikäinen-Saarenmaa, Päivi; Mathew, Cherian; Morrison, Norman; Nenadic, Aleksandra; de la Hidalga, Abraham Nieva; Obst, Matthias; Oostermeijer, Gerard; Paymal, Elisabeth; Pesole, Graziano; Pinto, Salvatore; Poigné, Axel; Fernandez, Francisco Quevedo; Santamaria, Monica; Saarenmaa, Hannu; Sipos, Gergely; Sylla, Karl-Heinz; Tähtinen, Marko; Vicario, Saverio; Vos, Rutger Aldo; Williams, Alan R; Yilmaz, Pelin

2016-10-20

Making forecasts about biodiversity and giving support to policy relies increasingly on large collections of data held electronically, and on substantial computational capability and capacity to analyse, model, simulate and predict using such data. However, the physically distributed nature of data resources and of expertise in advanced analytical tools creates many challenges for the modern scientist. Across the wider biological sciences, presenting such capabilities on the Internet (as "Web services") and using scientific workflow systems to compose them for particular tasks is a practical way to carry out robust "in silico" science. However, use of this approach in biodiversity science and ecology has thus far been quite limited. BioVeL is a virtual laboratory for data analysis and modelling in biodiversity science and ecology, freely accessible via the Internet. BioVeL includes functions for accessing and analysing data through curated Web services; for performing complex in silico analysis through exposure of R programs, workflows, and batch processing functions; for on-line collaboration through sharing of workflows and workflow runs; for experiment documentation through reproducibility and repeatability; and for computational support via seamless connections to supporting computing infrastructures. We developed and improved more than 60 Web services with significant potential in many different kinds of data analysis and modelling tasks. We composed reusable workflows using these Web services, also incorporating R programs. Deploying these tools into an easy-to-use and accessible 'virtual laboratory', free via the Internet, we applied the workflows in several diverse case studies. We opened the virtual laboratory for public use and through a programme of external engagement we actively encouraged scientists and third party application and tool developers to try out the services and contribute to the activity. Our work shows we can deliver an operational

Mars Science Laboratory Rover System Thermal Test

Science.gov (United States)

Novak, Keith S.; Kempenaar, Joshua E.; Liu, Yuanming; Bhandari, Pradeep; Dudik, Brenda A.

2012-01-01

On November 26, 2011, NASA launched a large (900 kg) rover as part of the Mars Science Laboratory (MSL) mission to Mars. The MSL rover is scheduled to land on Mars on August 5, 2012. Prior to launch, the Rover was successfully operated in simulated mission extreme environments during a 16-day long Rover System Thermal Test (STT). This paper describes the MSL Rover STT, test planning, test execution, test results, thermal model correlation and flight predictions. The rover was tested in the JPL 25-Foot Diameter Space Simulator Facility at the Jet Propulsion Laboratory (JPL). The Rover operated in simulated Cruise (vacuum) and Mars Surface environments (8 Torr nitrogen gas) with mission extreme hot and cold boundary conditions. A Xenon lamp solar simulator was used to impose simulated solar loads on the rover during a bounding hot case and during a simulated Mars diurnal test case. All thermal hardware was exercised and performed nominally. The Rover Heat Rejection System, a liquid-phase fluid loop used to transport heat in and out of the electronics boxes inside the rover chassis, performed better than predicted. Steady state and transient data were collected to allow correlation of analytical thermal models. These thermal models were subsequently used to predict rover thermal performance for the MSL Gale Crater landing site. Models predict that critical hardware temperatures will be maintained within allowable flight limits over the entire 669 Sol surface mission.

Correlation of psychomotor skills and didactic performance among dental students in Saudi Arabia

Directory of Open Access Journals (Sweden)

Afify AR

2013-10-01

Full Text Available Ahmed R Afify,1 Khalid H Zawawi,1 Hisham I Othman,2 Ayman A Al-Dharrab31Department of Preventive Dental Sciences, 2Department of Basic Oral and Clinical Sciences, 3Department of Oral and Maxillofacial Rehabilitation, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi ArabiaObjectives: The objective of this study is to investigate the correlation between the psychomotor skills and the academic performance of dental students.Methods: Didactic and preclinical scores were collected for students who graduated from the Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia, in 2011. Three courses (Dental Anatomy, Removable Prosthodontic Denture, and Orthodontics were selected. Correlations comparing didactic and practical scores were done for the total samples, then for the males and females separately.Results: There was no significant correlation between the practical and didactic scores for the three courses for the total sample. There was a significant correlation between all three subjects in the didactic scores. For females, the results showed that there was only a significant correlation between the practical and didactic scores for Dental Anatomy. For males, no correlation was observed between the practical and didactic scores for all subjects.Conclusion: In the present sample, didactic performance did not correlate well with the students' psychomotor performance.Keywords: psychomotor performance, didactic performance, dental students, correlation study, dental education, practical performance

Evolution and validation of a personal form of an instrument for assessing science laboratory classroom environments

Science.gov (United States)

Fraser, Barry J.; Giddings, Geoffrey J.; McRobbie, Campbell J.

The research reported in this article makes two distinctive contributions to the field of classroom environment research. First, because existing instruments are unsuitable for science laboratory classes, the Science Laboratory Environment Inventory (SLEI) was developed and validated. Second, a new Personal form of the SLEI (involving a student's perceptions of his or her own role within the class) was developed and validated in conjunction with the conventional Class form (involving a student's perceptions of the class as a whole), and its usefulness was investigated. The instrument was cross-nationally fieldtested with 5,447 students in 269 senior high school and university classes in six countries, and cross-validated with 1,594 senior high school students in 92 classes in Australia. Each SLEI scale exhibited satisfactory internal consistency reliability, discriminant validity, and factorial validity, and differentiated between the perceptions of students in different classes. A variety of applications with the new instrument furnished evidence about its usefulness and revealed that science laboratory classes are dominated by closed-ended activities; mean scores obtained on the Class form were consistently somewhat more favorable than on the corresponding Personal form; females generally held more favorable perceptions than males, but these differences were somewhat larger for the Personal form than the Class form; associations existed between attitudinal outcomes and laboratory environment dimensions; and the Class and Personal forms of the SLEI each accounted for unique variance in student outcomes which was independent of that accounted for by the other form.

Dental Practice, Human Immunodeficiency Virus Transmission and ...

African Journals Online (AJOL)

A self-administered questionnaire was used for data collection. A total of 113 OHCWs comprising students, house officers, resident doctors, dental nurses and consultants participated. Analysis was by Statistical Package for the Social Sciences version 17 (SPSS Inc., Chicago, IL, USA). Data analysis included descriptive ...

Inquiry-based laboratory investigations and student performance on standardized tests in biological science

Science.gov (United States)

Patke, Usha

Achievement data from the 3rd International Mathematics and Sciences Study and Program for International Student Assessment in science have indicated that Black students from economically disadvantaged families underachieve at alarming rates in comparison to White and economically advantaged peer groups. The study site was a predominately Black, urban school district experiencing underachievement. The purpose of this correlational study was to examine the relationship between students' use of inquiry-based laboratory investigations and their performance on the Biology End of Course Test, as well as to examine the relationship while partialling out the effects of student gender. Constructivist theory formed the theoretical foundation of the study. Students' perceived levels of experience with inquiry-based laboratory investigations were measured using the Laboratory Program Variable Inventory (LPVI) survey. LPVI scores of 256 students were correlated with test scores and were examined by student gender. The Pearson correlation coefficient revealed a small direct correlation between students' experience in inquiry-based laboratory investigation classes and standardized test scores on the Biology EOCT. A partial correlational analysis indicated that the correlation remained after controlling for gender. This study may prompt a change from teacher-centered to student-centered pedagogy at the local site in order to increase academic achievement for all students. The results of this study may also influence administrators and policy makers to initiate local, state, or nationwide curricular development. A change in curriculum may promote social change as students become more competent, and more able, to succeed in life beyond secondary school.

Dental management of hemophiliac child under general anesthesia.

Science.gov (United States)

Rayen, R; Hariharan, V S; Elavazhagan, N; Kamalendran, N; Varadarajan, R

2011-01-01

Hemophilia is the most common inherited bleeding disorder. Hemophilic patients should be cosidered as special patients. There is no contraindication to general dental treatment for hemophiliacs, as they generally do not involve bleeding. But caution must be used with any surgical procedures that involve the local and general anesthesia. Such patients should always be managed in the setting of specialized units with appropriate clinical expertise and laboratory support. Recent advances in the management of hemophilia have enabled many hemophiliac patients to receive surgical dental procedures in an outpatient dental care on a routine basis. The purpose of this case report is to provide a few management strategies when providing full mouth rehabilitation under anesthesia and replacement therapies that are available. In addition, overviews of possible complication that may be encountered when providing such treatment are discussed here.

Dental management of hemophiliac child under general anesthesia

Directory of Open Access Journals (Sweden)

R Rayen

2011-01-01

Full Text Available Hemophilia is the most common inherited bleeding disorder. Hemophilic patients should be cosidered as special patients. There is no contraindication to general dental treatment for hemophiliacs, as they generally do not involve bleeding. But caution must be used with any surgical procedures that involve the local and general anesthesia. Such patients should always be managed in the setting of specialized units with appropriate clinical expertise and laboratory support. Recent advances in the management of hemophilia have enabled many hemophiliac patients to receive surgical dental procedures in an outpatient dental care on a routine basis. The purpose of this case report is to provide a few management strategies when providing full mouth rehabilitation under anesthesia and replacement therapies that are available. In addition, overviews of possible complication that may be encountered when providing such treatment are discussed here.

Enhancing the actinide sciences in Europe through hot laboratories networking and pooling: from ACTINET to TALISMAN

International Nuclear Information System (INIS)

Bourg, S.; Poinssot, C.

2013-01-01

Since 2004, Europe supports the strengthening of the European actinides sciences scientific community through the funding of dedicated networks: (i) from 2004 to 2008, the ACTINET6 network of excellence (6. Framework Programme) gathered major laboratories involved in nuclear research and a wide range of academic research organisations and universities with the specific aims of funding and implementing joint research projects to be performed within the network of pooled facilities; (ii) from 2009 to 2013, the ACTINET-I3 integrated infrastructure initiative (I3) supports the cost of access of any academics in the pooled EU hot laboratories. In this continuation, TALISMAN (Trans-national Access to Large Infrastructures for a Safe Management of Actinides) gathers now the main European hot laboratories in actinides sciences in order to promote their opening to academics and universities and strengthen the EU-skills in actinides sciences. Furthermore, a specific focus is set on the development of advanced cutting-edge experimental and spectroscopic capabilities, the combination of state-of-the art experimental with theoretical first-principle methods on a quantum mechanical level and to benefit from the synergy between the different scientific and technical communities. ACTINET-I3 and TALISMAN attach a great importance and promote the Education and Training of the young generation of actinides scientists in the Trans-national access but also by organizing Schools (general Summer Schools or Theoretical User Lab Schools) or by granting students to attend International Conference on actinide sciences. (authors)

Tanzania Dental Journal - Vol 17, No 2 (2012)

African Journals Online (AJOL)

Patient satisfaction with dental services rendered at School of Dentistry, Muhimbili University of Health and Allied Sciences, Tanzania · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. B Mwela, EN Kikwilu, 38-44 ...

Weaker dental enamel explains dental decay.

Science.gov (United States)

Vieira, Alexandre R; Gibson, Carolyn W; Deeley, Kathleen; Xue, Hui; Li, Yong

2015-01-01

Dental caries continues to be the most prevalent bacteria-mediated non-contagious disease of humankind. Dental professionals assert the disease can be explained by poor oral hygiene and a diet rich in sugars but this does not account for caries free individuals exposed to the same risk factors. In order to test the hypothesis that amount of amelogenin during enamel development can influence caries susceptibility, we generated multiple strains of mice with varying levels of available amelogenin during dental development. Mechanical tests showed that dental enamel developed with less amelogenin is "weaker" while the dental enamel of animals over-expressing amelogenin appears to be more resistant to acid dissolution.

Materials Science Division HVEM-Tandem Facility at Argonne National Laboratory

International Nuclear Information System (INIS)

Taylor, A.

1981-10-01

The ANL-Materials Science Division High Voltage Electron Microscope-Tandem Facility is a unique national research facility available to scientists from industry, universities, and other national laboratories, following a peer evaluation of their research proposals by the Facility Steering Committee. The principal equipment consists of a Kratos EM7 1.2-MV high voltage electron microscope, a 300-kV Texas Nuclear ion accelerator, and a National Electrostatics 2-MV Tandem accelerator. Ions from both accelerators are transmitted into the electron microscope through the ion-beam interface. Recent work at the facility is summarized

A study among dental students regarding the factors influenced dental students to choose dentistry as career

Science.gov (United States)

AnbuSelvan, Gobichetti Palayam Jagatheeswaran; Gokulnathan, Subramaniam; PrabuRajan, Vilvanathan; RajaRaman, Gangadharan; Kumar, Singaravelu Suresh; Thagavelu, Arthie

2013-01-01

Introduction: Career choice is a complex decision for students since it determines the kind of profession that they intend to pursue in life. As students try to make a career choice while in secondary school, they face the problem of matching their career choices with their abilities and school performance. Aims: The purpose of this study was to examine factors influencing career choice among dental college students in private dental collages in Tamil Nadu, India. Settings and Design: The study was conducted using descriptive survey design with a population of 989 students. The data for this study was collected using a questionnaire and interview schedules. Materials and Methods: The data for this study was collected using questionnaire previously used by Swati Shah and Rajaraman and interview schedules. The analysis of the study was based on the factors: Outcome expectations, gender, personal interests, and other factors. Results and Conclusion: The most common reason for among the dental students to choose dental science as their career choice was self-interested followed by didn′t get medicine degree, prestige and gives respect. The least common reasons observed in the study population were inspired by dentists. The findings of this study indicate that availability the most influential factors affecting career choices among students. PMID:23946573

Effect of year of study on stress levels in male undergraduate dental students

Directory of Open Access Journals (Sweden)

Alzahem AM

2013-10-01

Full Text Available Abdullah M Alzahem,1 Henk T van der Molen,2 Benjamin J de Boer31Advanced Education in General Dentistry (AEGD Residency Program, King Abdullah International Medical Research Center/King Saud bin Abdulaziz University for Health Sciences/National Guard Health Affairs, Riyadh, Saudi Arabia; 2Institute of Psychology, Faculty of Social Sciences, Erasmus University, Rotterdam, The Netherlands; 3Clinical Psychology, Princess Nora University, Riyadh, Saudi ArabiaObjective: Stress among dental students can be a significant threat, resulting in physical and/or mental illness, and have a negative effect on students' performance and the professional practice of dentistry. Stress can occur from different sources. The purpose of this study is to test whether the year of study has an effect on the stress levels of dental students.Method: Our study consisted of a cross-sectional survey using a modified version of the Dental Environment Stress (DES questionnaire. The questionnaires were filled out by male undergraduate dental students at King Saud University in Riyadh City during the 2010–2011 academic year (n = 214.Results: The results show the most common sources of stress: examinations and completing clinical requirements. Moreover, in the five-year lecture-based traditional curriculum, the third year students reported the highest level of stress, whereas the first year reported the lowest level of stress.Conclusion: Third year undergraduate dental students reported the highest level of stress. This stress could be reduced by reviewing and modifying the dental curriculum by allowing students to have contact with patients more gradually, starting from the first year, in addition to adding stress prevention and intervention programs in dental curricula.Keywords: dental, education, students, stress, study year

Dental Fear and Delayed Dental Care in Appalachia-West Virginia.

Science.gov (United States)

Wiener, R Constance

2015-08-01

The people of Appalachia-West Virginia are culturally unique and are known to have oral health disparities. The purpose of this study was to evaluate dental fear in relation to delayed dental care as a factor influencing oral health behaviors within this culture. A cross sectional study design was used. Participants were urgent care patients in a university dental clinic. The sample included 140 adults over age 18 years. The Dental Fear Survey was used to determine dental fear level. Self-report of delayed dental care was provided by the participants. The Dental Fear Survey was dichotomized at score 33, with higher scores indicating dental fear. The prevalence of dental fear was 47.1% (n=66). There was a significant association of dental fear and dental delay. The unadjusted odds ratio was 2.87 (95% CI: 1.17, 7.04; p=0.021). The adjusted odds ratio was 3.83 (95%CI: 1.14, 12.82; p=0.030), controlling for tobacco use, perceived oral health status, pain, and last dental visit. A difference in dental delay between men and women was not present in this sample. The only significant variable in delayed dental care was dental fear. In Appalachia-West Virginia, there remains a high level of dental fear, despite advances in dental care, techniques, and procedures. Copyright © 2015 The American Dental Hygienists’ Association.

Developing a flexible core Dental Public Health curriculum for predoctoral dental and dental hygiene schools.

Science.gov (United States)

Atchison, Kathryn; Mascarenhas, Ana Karina; Bhoopathi, Vinodh

2015-01-01

The curriculum for graduating dental and dental hygiene students must prepare them to contribute to the improvement or maintenance of health for individual patient's and the public's health. The objective is to describe the background for and the process used to develop a core Dental Public Health Curriculum for such students. The process used was to solicit and review existing dental public health curriculum in dental and dental hygiene schools; review curriculum for other health professionals; identify the themes needed to frame the curriculum; select usable materials and identify gaps in existing curricular materials; and develop appropriate curriculum materials that would embody the competencies developed for undergraduate dental and dental hygiene education. Twenty-three topics were identified as embodying the eight competencies. Based on these topics, six courses, Principles of Dental Public Health, Evidence-Based Dentistry, Ethics and Dental Public Health, Dental Public Health Policy and Advocacy, Oral Health Promotion and Disease Prevention, and Oral Health Literacy and Dental Public Health, were prepared. Each course includes syllabus, PowerPoint presentations, student assignments and activities, instructor guide, and classroom discussion points. Depending on the hours available in the existing curriculum at the dental or hygiene school, lecture presentations and take home assignments/discussions may be used independently or in combination with presentations from other courses. In addition, individual discussions and activities may be used to integrate dental public health materials into other courses. A flexible curriculum is available at the AAPHD website to enable the incorporation of DPH topics into the curriculum. © 2015 American Association of Public Health Dentistry.

Engaging Rural Appalachian High School Girls in College Science Laboratories to Foster STEM-Related Career Interest

Directory of Open Access Journals (Sweden)

Karen Louise Kelly

2015-11-01

Full Text Available Setting students on a path to success in careers in science is a challenge in poor rural Appalachian public schools. Students face many socioeconomic obstacles. Their teachers are also limited by many factors including inadequate facilities, under-funding, geographical isolation of the schools, and state-testing constraints. Additionally, students and teachers lack the availability of outside science educational opportunities. In an effort to address this situation, 24 academically strong high school junior girls and their teachers from the Carter County School System in rural east Tennessee were invited for a laboratory day at Milligan College, a small liberal arts college in the heart of the county. Science faculty, female science majors, and admissions staff volunteered in service to the project. The event included three laboratory sessions, lunch in the college cafeteria, and campus tours. This successful example, as evidenced by positive evaluations by the invited girls and their teachers, of educational outreach by a local, small liberal arts college to a rural county school system provides a model for establishing a relationship between higher education institutions and these underprivileged schools, with the intention of drawing more of these poor, rural Appalachian students, particularly girls, into a science, technology, engineering, and mathematics (STEM career path.

Los Alamos National Laboratory Science Education Programs. Quarterly progress report, April 1--June 30, 1995

Energy Technology Data Exchange (ETDEWEB)

Gill, D.

1995-09-01

This report is quarterly progress report on the Los Alamos National Laboratory Science Education Programs. Included in the report are dicussions on teacher and faculty enhancement, curriculum improvement, student support, educational technology, and institutional improvement.

Electronic laboratory quality assurance program: A method of enhancing the prosthodontic curriculum and addressing accreditation standards.

Science.gov (United States)

Moghadam, Marjan; Jahangiri, Leila

2015-08-01

An electronic quality assurance (eQA) program was developed to replace a paper-based system and to address standards introduced by the Commission on Dental Accreditation (CODA) and to improve educational outcomes. This eQA program provides feedback to predoctoral dental students on prosthodontic laboratory steps at New York University College of Dentistry. The purpose of this study was to compare the eQA program of performing laboratory quality assurance with the former paper-based format. Fourth-year predoctoral dental students (n=334) who experienced both the paper-based and the electronic version of the quality assurance program were surveyed about their experiences. Additionally, data extracted from the eQA program were analyzed to identify areas of weakness in the curriculum. The study findings revealed that 73.8% of the students preferred the eQA program to the paper-based version. The average number of treatments that did not pass quality assurance standards was 119.5 per month. This indicated a 6.34% laboratory failure rate. Further analysis of these data revealed that 62.1% of the errors were related to fixed prosthodontic treatment, 27.9% to partial removable dental prostheses, and 10% to complete removable dental prostheses in the first 18 months of program implementation. The eQA program was favored by dental students who have experienced both electronic and paper-based versions of the system. Error type analysis can yield the ability to create customized faculty standardization sessions and refine the didactic and clinical teaching of the predoctoral students. This program was also able to link patient care activity with the student's laboratory activities, thus addressing the latest requirements of the CODA regarding the competence of graduates in evaluating laboratory work related to their patient care. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

The Importance of a Laboratory Section on Student Learning Outcomes in a University Introductory Earth Science Course

Science.gov (United States)

Forcino, Frank L.

2013-01-01

Laboratory sections of university Earth science courses provide hands-on, inquiry-based activities for students in support of lecture and discussion. Here, I compare student conceptual knowledge outcomes of laboratory sections by administering an independent concept inventory at the beginning and end of two courses: one that had a lecture and a…

An overview of dental radiology in cities of Brazil

International Nuclear Information System (INIS)

Menezes, F.L.; Paschoal, C.M.M.; Ferreira, F.C.L.; Belinato, W.

2015-01-01

In Brazil, the National Ordinance No. 453/1998 of the Ministry of Health regulates the operation of medical and odontological diagnostic radiology services. However, the inspection of periapical dental X-ray equipment is not carried out by some Sanitary Surveillances. This study intended to determine the suitability to the ordinance of the dental offices of Sobral-CE, Northeast of Brazil, and to compare the results with literature data for other cities of Brazil, giving a view of dental radiology of this country. It was performed tests of radiation field and image quality, and it was applied questionnaires to the professionals of Sobral-CE. For the image quality test, it was used a dental phantom and the processing of the films was performed in the clinics and at the laboratory (standard). The questionnaire assessed physical parameters that interfere on the radiation protection and on the quality of images. The results show that the ordinance is not being properly followed and that it is necessary to inspect the periapical X-ray equipments. Moreover, in general, it is observed that dental professionals should have better training on ionizing radiation and on radiation protection. (authors)

Ergonomic applications to dental practice

Directory of Open Access Journals (Sweden)

Shipra Gupta

2011-01-01

Full Text Available The term "work-related musculoskeletal disorders (WMSDs," refers to musculoskeletal disorders to which the work environment contributes significantly, or to musculoskeletal disorders that are made worse or longer lasting by work conditions or workplace risk factors. In recent years, there has been an increase in reporting WMSDs for dental persons. Risk factors of WMSDs with specific reference to dentistry include - stress, poor flexibility, improper positioning, infrequent breaks, repetitive movements, weak postural muscles, prolonged awkward postures and improper adjustment of equipment. Ergonomics is the science of designing jobs, equipment and workplaces to fit workers. Proper ergonomic design is necessary to prevent repetitive strain injuries, which can develop over time and can lead to long-term disability. In this article, 20 strategies to prevent WMSDs in the dental operatory are discussed.

ROUTES OF TRANSMISSION OF DISEASES IN DENTAL PRACTICE

African Journals Online (AJOL)

Department of Community and Preventive Dentistry. Faculty of Dentistry, Muhimbili University College of Health Sciences,. Dar es Salaam, Tanzania. Contamination and infection. Transmission of microorganisms ego bacteria, viruses; fungi and protozoa is a hazard in dental practice (1-4) .. Introduction of microorganisms.

Endodontic Shaping Performance Using Nickel–Titanium Hand and Motor ProTaper Systems by Novice Dental Students

OpenAIRE

Tu, Ming-Gene; Chen, San-Yue; Huang, Heng-Li; Tsai, Chi-Cheng

2008-01-01

Preparing a continuous tapering conical shape and maintaining the original shape of a canal are obligatory in root canal preparation. The purpose of this study was to compare the shaping performance in simulated curved canal resin blocks of the same novice dental students using hand-prepared and engine-driven nickel–titanium (NiTi) rotary ProTaper instruments in an endodontic laboratory class. Methods: Twenty-three fourth-year dental students attending China Medical University Dental Schoo...

Biomedical and environmental sciences programs at the Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Preston, E.L.; Getsi, J.A.

1982-07-01

A major objective of the biomedical and environmental sciences (BES) research at the Oak Ridge National Laboratory (ORNL) is to provide information on environmental, health, and safety considerations that can be used in the formulation and implementation of energy technology decisions. Research is directed at securing information required for an understanding of both the short- and long-term consequences of the processes involved in new energy technologies. Investigation of the mechanisms responsible for biological and ecological damage caused by substances associated with energy production and of repair mechanisms is a necessary component of this research. The research is carried out by the staff of four divisions and one program: Biology Division, Environmental Sciences Division, Health and Safety Research Division, Information Division, and the Life Sciences Synthetic Fuels Program. Research programs underway in each of these divisions are discussed. Information on the following subjects is also included: interactions with universities; interactions with industry; technology transfer; recent accomplishments in the areas of program, publications, awards, and patents; and new initiatives

Biomedical and environmental sciences programs at the Oak Ridge National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Preston, E.L.; Getsi, J.A. (comps.)

1982-07-01

A major objective of the biomedical and environmental sciences (BES) research at the Oak Ridge National Laboratory (ORNL) is to provide information on environmental, health, and safety considerations that can be used in the formulation and implementation of energy technology decisions. Research is directed at securing information required for an understanding of both the short- and long-term consequences of the processes involved in new energy technologies. Investigation of the mechanisms responsible for biological and ecological damage caused by substances associated with energy production and of repair mechanisms is a necessary component of this research. The research is carried out by the staff of four divisions and one program: Biology Division, Environmental Sciences Division, Health and Safety Research Division, Information Division, and the Life Sciences Synthetic Fuels Program. Research programs underway in each of these divisions are discussed. Information on the following subjects is also included: interactions with universities; interactions with industry; technology transfer; recent accomplishments in the areas of program, publications, awards, and patents; and new initiatives. (JGB)

Economic impact of dental hygienists on solo dental practices.

Science.gov (United States)

Lazar, Vickie F; Guay, Albert H; Beazoglou, Tryfon J

2012-08-01

The fact that a significant percentage of dentists employ dental hygienists raises an important question: Are dental practices that utilize a dental hygienist structurally and operationally different from practices that do not? This article explores differences among dental practices that operate with and without dental hygienists. Using data from the American Dental Association's 2003 Survey of Dental Practice, a random sample survey of U.S. dentists, descriptive statistics were used to compare selected characteristics of solo general practitioners with and without dental hygienists. Multivariate regression analysis was used to estimate the effect of dental hygienists on the gross billings and net incomes of solo general practitioners. Differences in practice characteristics--such as hours spent in the practice and hours spent treating patients, wait time for a recall visit, number of operatories, square feet of office space, net income, and gross billings--were found between solo general practitioners who had dental hygienists and those who did not. Solo general practitioners with dental hygienists had higher gross billings. Higher gross billings would be expected, as would higher expenses. However, net incomes of those with dental hygienists were also higher. In contrast, the mean waiting time for a recall visit was higher among dentists who employed dental hygienists. Depending on personal preferences, availability of qualified personnel, etc., dentists who do not employ dental hygienists but have been contemplating that path may want to further research the benefits and opportunities that may be realized.

Achieving student diversity in dental schools: a model that works.

Science.gov (United States)

Lacy, Ernestine S; McCann, Ann L; Miller, Barbara H; Solomon, Eric; Reuben, Jayne S

2012-05-01

It is well known that there is a large disparity between the proportions of African Americans, Hispanics, and American Indians in the general U.S. population and in the nation's dental profession. While these underrepresented minorities (URMs) together make up almost 30 percent of the population, they comprise only about 6 percent of U.S. dentists. For years, the American Dental Education Association has been diligently working with U.S. dental schools to reduce this disparity by increasing the diversity of their student bodies. However, with approximately 13 percent of first-year dental students coming from URM groups, the proportion of URM students entering dental school continues to remain significantly below that of the general population. Diversifying the dental profession is important for improving access to care for underrepresented groups, and student diversity provides better educational experiences for all students. Texas A&M Health Science Center Baylor College of Dentistry's strategy for increasing the number of URM dentists was to create a series of initiatives that together form a successful comprehensive program addressing students' awareness of and attraction to a dental career, academic enrichment, admissions, and graduation. The cumulative impact of this program is that the college enrolled greater numbers and proportions of URM students than any other non-minority U.S. dental school from 2006 to 2009. This article describes the program that led to these successes.

An Investigation of Zimbabwe High School Chemistry Students' Laboratory Work-Based Images of the Nature of Science

Science.gov (United States)

Vhurumuku, Elaosi; Holtman, Lorna; Mikalsen, Oyvind; Kolsto, Stein D.

2006-01-01

This study investigates the proximal and distal images of the nature of science (NOS) that A-level students develop from their participation in chemistry laboratory work. We also explored the nature of the interactions among the students' proximal and distal images of the NOS and students' participation in laboratory work. Students' views of the…

Burnout Among the Clinical Dental Students in the Jordanian Universities

Science.gov (United States)

Amin, Wala Majid; Al-Ali, Muna H.; Duaibis, Ramzi B.; Oweis, Tamara; Badran, Darwish H.

2009-01-01

Background The study aimed to evaluate the level of burnout among the clinical dental students in two Jordanian universities. Methods A total of 307 students from the two schools were surveyed using Maslach Burnout Inventory survey. Scores for the inventory’s subscales were calculated and the mean values for the students’ groups were computed separately. Kruskal-Wallis and Mann-Whitney tests were carried out and the results were compared at 95% confidence level. Results The results showed that the dental students in both Jordanian universities suffered high levels of emotional exhaustion and depersonalization compared to reported levels for dental students in other countries. The dental students of the University of Jordan demonstrated a significantly higher (p < 0.05) level of emotional exhaustion than their counterparts in the Jordan University of Science and Technology. Conclusions The findings indicated that dental students in the Jordanian universities presented considerable degrees of burnout manifested by high levels of emotional exhaustion and depersonalization. Studies targeting students health and psychology should be carried out to determine the causes of burnout among dental students. The curricula of the dental schools in the two universities should be accordingly improved to minimize burnout among the students. Keywords Burnout; Emotional exhaustion; Depersonalization; Personal accomplishment; Maslach Burnout Inventory PMID:22461870

Life sciences payload definition and integration study. Volume 4: Appendix, costs, and data management requirements of the dedicated 30-day laboratory. [carry-on laboratory for Spacelab

Science.gov (United States)

1974-01-01

The results of the updated 30-day life sciences dedicated laboratory scheduling and costing activities are documented, and the 'low cost' methodology used to establish individual equipment item costs is explained in terms of its allowances for equipment that is commerical off-the-shelf, modified commercial, and laboratory prototype; a method which significantly lowers program costs. The costs generated include estimates for non-recurring development, recurring production, and recurring operations costs. A cost for a biomedical emphasis laboratory and a Delta cost to provide a bioscience and technology laboratory were also generated. All cost reported are commensurate with the design and schedule definitions available.

Law in the laboratory a guide to the ethics of federally funded science research

CERN Document Server

Charrow, Robert P

2010-01-01

The National Institutes of Health and the National Science Foundation together fund more than $40 billon of research annually in the United States and around the globe. These large public expenditures come with strings, including a complex set of laws and guidelines that regulate how scientists may use NIH and NSF funds, how federally funded research may be conducted, and who may have access to or own the product of the research. Until now, researchers have had little instruction on the nature of these laws and how they work. But now, with Robert P. Charrow’s Law in the Laboratory, they have a readable and entertaining introduction to the major ethical and legal considerations pertaining to research under the aegis of federal science funding. For any academic whose position is grant funded, or for any faculty involved in securing grants, this book will be an essential reference manual. And for those who want to learn how federal legislation and regulations affect laboratory research, Charrow’s primer wil...

Respiratory Systems of Dental Technicians Negatively Affected during 5 Years of Follow-Up

Directory of Open Access Journals (Sweden)

Nurgül Bozkurt

2016-08-01

Full Text Available Background: Dental laboratory technician is one of the professions in which dust exposure is frequently experienced and therefore the health of workers has to be monitored. Aims: In this study, changes in the pulmonary functions and of pneumoconiosis frequencies among dental technicians after five years were investigated by comparing the results of two screenings carried out in 2008 and 2013. Study Design: Cohort study. Methods: In 2008 and 2013, Provincial Health Directorate carried out two different health screenings covering all of the dental technicians working in dental laboratories in Denizli. In both screenings, a questionnaire was applied, with which socio-demographic and workplace properties of the technicians were obtained. In addition, Pulmonary function tests (PFT and standard chest X-rays of the technicians were performed. The results of these two screenings were evaluated by a chest specialist, and physical examinations were performed as necessary. In 2013, technicians who had pathologies underwent computerized tomography (HRCT. In this study, the study group was composed of dental laboratory technicians that participated in both screenings (2008 and 2013 and the data obtained from the screenings were compared. The gathered data were analyzed using paired student-t and X2 tests. Results: A total of 125 dental laboratory technicians participated in the two screenings. Overall, 92% of the technicians were male and the mean age of the participants was 35. Technicians were working for 9 hours a day, 6 days a week. Total exposure time was calculated to be around 41 thousand hours. Approximately 60% of workers were smokers. When the results of PFT were analyzed, 73% of the first evaluations were found to be normal; however, this ratio decreased to 51% in the second analysis five years later. In the second PFT measurement, compared to the first, there was a 23% decrease in the forced vital capacity (FVC value, and a 15.7% decrease in

NASA Johnson Space Center's Planetary Sample Analysis and Mission Science (PSAMS) Laboratory: A National Facility for Planetary Research

Science.gov (United States)

Draper, D. S.

2016-01-01

NASA Johnson Space Center's (JSC's) Astromaterials Research and Exploration Science (ARES) Division, part of the Exploration Integration and Science Directorate, houses a unique combination of laboratories and other assets for conducting cutting edge planetary research. These facilities have been accessed for decades by outside scientists, most at no cost and on an informal basis. ARES has thus provided substantial leverage to many past and ongoing science projects at the national and international level. Here we propose to formalize that support via an ARES/JSC Plane-tary Sample Analysis and Mission Science Laboratory (PSAMS Lab). We maintain three major research capa-bilities: astromaterial sample analysis, planetary process simulation, and robotic-mission analog research. ARES scientists also support planning for eventual human ex-ploration missions, including astronaut geological training. We outline our facility's capabilities and its potential service to the community at large which, taken together with longstanding ARES experience and expertise in curation and in applied mission science, enable multi-disciplinary planetary research possible at no other institution. Comprehensive campaigns incorporating sample data, experimental constraints, and mission science data can be conducted under one roof.

76 FR 56406 - Science and Technology Reinvention Laboratory Demonstration Project; Department of the Army; Army...

Science.gov (United States)

2011-09-13

... DEPARTMENT OF DEFENSE Office of the Secretary Science and Technology Reinvention Laboratory Demonstration Project; Department of the Army; Army Research, Development and Engineering Command; Tank... personnel management demonstration project for eligible TARDEC employees. Within that notice the table...

A laboratory evaluation of the efficacy of a herbal dentifrice on dental ...

African Journals Online (AJOL)

The efficacy of a topically applied herbal dentifrice (toothpaste) Dabur (R) was evaluated in thirty albino rats. Dental caries was induced by inoculating their mouths with Streptococcus viridans and then fed a cariogenic 56% sucrose sugar in addition to rat pellets. The animals were then divided into 3 equal groups with 10 ...

Radiological Contingency Planning for the Mars Science Laboratory Launch

Energy Technology Data Exchange (ETDEWEB)

Paul P. Guss

2008-04-01

This paper describes the contingency planning for the launch of the Mars Science Laboratory scheduled for the 21-day window beginning on September 15, 2009. National Security Technologies, LLC (NSTec), based in Las Vegas, Nevada, will support the U.S. Department of Energy (DOE) in its role for managing the overall radiological contingency planning support effort. This paper will focus on new technologies that NSTec’s Remote Sensing Laboratory (RSL) is developing to enhance the overall response capability that would be required for a highly unlikely anomaly. This paper presents recent advances in collecting and collating data transmitted from deployed teams and sensors. RSL is responsible to prepare the contingency planning for a range of areas from monitoring and assessment, sample collection and control, contaminated material release criteria, data management, reporting, recording, and even communications. The tools RSL has available to support these efforts will be reported. The data platform RSL will provide shall also be compatible with integration of assets and field data acquired with other DOE, National Space and Aeronautics and Space Administration (NASA), state, and local resources, personnel, and equipment. This paper also outlines the organizational structure for response elements in radiological contingency planning.

Argument-Driven Inquiry: Using the Laboratory to Improve Undergraduates' Science Writing Skills through Meaningful Science Writing, Peer-Review, and Revision

Science.gov (United States)

Walker, Joi Phelps; Sampson, Victor

2013-01-01

This paper presents preliminary evidence supporting the use of peer review in undergraduate science as a means to improve student writing and to alleviate barriers, such as lost class time, by incorporation of the peer-review process into the laboratory component of the course. The study was conducted in a single section of an undergraduate…

The relationship between dental caries and body mass index and food habits in children referred to dentistry clinic of Tabriz university of medical sciences

Directory of Open Access Journals (Sweden)

javad Mohtadinia

2011-03-01

Full Text Available Regarding to the importance of food habits and the probable role of obesity in dental caries, this study was done to assess the relationship between teeth decay index in children and body mass index, and food habits in dentistry clinic of Tabriz university of medical sciences. Materials and Methods: In this cross-sectional analytic study 202 children aged 3-12 years old were selected randomly. For assessing dental caries, decayed, missed, and filled teeth index and for evaluating food habits, semi quantitative food frequency questionnaire were used. Data were analyzed using Correlation test and Regression analysis. Results: The overall mean of decayed, missed, and filled teeth index in the children of this study was 7.61±3.80. There were significant reverse correlations between this index and age (r = -0.176, and fruit consumption (r = -0.155 (P0.05. Considering the last regression model, age, mother job, and frequency of nuts consumption were significant predictors for decayed teeth number. Conclusion: The results of this study indicated that high fruit consumption was associated with less dental caries and among foods which were evaluated, consumption of nuts was significant predictor for decayed teeth number.

Reflective blogs in clinical education to promote critical thinking in dental hygiene students.

Science.gov (United States)

Wetmore, Ann O'Kelley; Boyd, Linda D; Bowen, Denise M; Pattillo, Robin E

2010-12-01

One challenge facing dental hygiene, as well as dental, education is to identify clinical teaching strategies promoting critical thinking and clinical reasoning. These skills are crucial elements in the practice of dental hygiene. A two-group design (intervention, n=28, and control, n=30) assessed first-year dental hygiene students using pre-and post-Health Science Reasoning Test (HSRT) scores to evaluate the effect of reflective blogging on critical thinking skills. A reflective blog rubric, based on Mezirow's levels of reflection, determined if reflective blogging increased the level of reflection for dental hygiene students. The results suggest within this nonprobability sample that reflective blogging did not produce a significant change in students' HSRT scores (p>0.05). However, analyses of reflective blog rubric scores demonstrated statistically significant improvements (pcritical thinking.

From dental science to clinical practice: Knowledge translation and evidence-based dentistry principles

Directory of Open Access Journals (Sweden)

Kelvin I. Afrashtehfar

2017-07-01

Full Text Available It has been claimed that in order to decrease the gap between what we know and what we do, research findings must be translated from knowledge to action. Such practices better enable dentists to make evidence-based decisions instead of personal ideas and judgments. To this end, this literature review aims to revisit the concepts of knowledge translation and evidence-based dentistry (EBD and depict their role and influence within dental education. It addresses some possible strategies to facilitate knowledge translation (KT, encourage dental students to use EBD principles, and to encourage dental educators to create an environment in which students become self-directed learners. It concludes with a call to develop up-to-date and efficient online platforms that could grant dentists better access to EBD sources in order to more efficiently translate research evidence into the clinic.

From dental science to clinical practice: Knowledge translation and evidence-based dentistry principles.

Science.gov (United States)

Afrashtehfar, Kelvin I; Assery, Mansour K

2017-07-01

It has been claimed that in order to decrease the gap between what we know and what we do, research findings must be translated from knowledge to action. Such practices better enable dentists to make evidence-based decisions instead of personal ideas and judgments. To this end, this literature review aims to revisit the concepts of knowledge translation and evidence-based dentistry (EBD) and depict their role and influence within dental education. It addresses some possible strategies to facilitate knowledge translation (KT), encourage dental students to use EBD principles, and to encourage dental educators to create an environment in which students become self-directed learners. It concludes with a call to develop up-to-date and efficient online platforms that could grant dentists better access to EBD sources in order to more efficiently translate research evidence into the clinic.

A discourse on the nature of dental hygiene knowledge and knowing.

Science.gov (United States)

Cobban, S J; Edgington, E M; Myrick, F; Keenan, L

2009-02-01

Historically, dental hygiene has adopted theory and research from other health disciplines, without adequately modifying these concepts to reflect the unique dental hygiene practice context, leaving dental hygiene's research and theory base underdeveloped. Dental hygiene has yet to articulate its epistemological assumptions--the nature, scope and object of dental hygiene knowledge--or to fully describe the patterns of knowing that are brought to practice. This paper uses a method of inquiry from philosophy to begin the discourse about dental hygiene ways of knowing. In nursing, Carper identified four fundamental patterns of knowing: empirics or the science of nursing; aesthetics or the art of nursing; personal knowledge and ethical or moral knowledge. These patterns were used to explore this concept within dental hygiene. There is more to the nature of dental hygiene knowledge and knowing than rote application of technique-related or research-based information in practice, including judgements about when and how to use different types of information that are used. Currently, empirical forms of knowledge seem to be disproportionately valued, yet evidence was found for all of Carper's four patterns of knowing. Carper's work on patterns of knowing in nursing provided a useful framework to initiate the discourse on ways of knowing in dental hygiene. These results are submitted for others to challenge, refine and extend, for continuing the discussion. Dental hygiene leaders and scholars need to engage in discourse about extending the epistemological assumptions to reflect reality.

Sociology of scientific knowledge and science education part 2: Laboratory life under the microscope

Science.gov (United States)

Slezak, Peter

1994-10-01

This article is the second of two that examine some of the claims of contemporary sociology of scientific knowledge (SSK) and the bearing of these claims upon the rationale and practice of science teaching. In the present article the celebrated work Laboratory Life of Latour and Woolgar is critically examined. Its radical, iconoclastic view of science is shown to be not merely without foundation but an extravagant deconstructionist nihilism according to which all science is fiction and the world is said to be socially constructed by negotiation. On this view, the success of a theory is not due to its intellectual merits or explanatory plausibility but to the capacity of its proponents to “extract compliance” from others. If warranted, such views pose a revolutionary challenge to the entire Western tradition of science and the goals of science education which must be misguided and unrealizable in principle. Fortunately, there is little reason to take these views seriously, though their widespread popularity is cause for concern among science educators.

Cryosphere Science Outreach using the Ice Sheet System Model and a Virtual Ice Sheet Laboratory

Science.gov (United States)

Cheng, D. L. C.; Halkides, D. J.; Larour, E. Y.

2015-12-01

Understanding the role of Cryosphere Science within the larger context of Sea Level Rise is both a technical and educational challenge that needs to be addressed if the public at large is to trulyunderstand the implications and consequences of Climate Change. Within this context, we propose a new approach in which scientific tools are used directly inside a mobile/website platform geared towards Education/Outreach. Here, we apply this approach by using the Ice Sheet System Model, a state of the art Cryosphere model developed at NASA, and integrated within a Virtual Ice Sheet Laboratory, with the goal is to outreach Cryospherescience to K-12 and College level students. The approach mixes laboratory experiments, interactive classes/lessons on a website, and a simplified interface to a full-fledged instance of ISSM to validate the classes/lessons. This novel approach leverages new insights from the Outreach/Educational community and the interest of new generations in web based technologies and simulation tools, all of it delivered in a seamlessly integrated web platform. This work was performed at the California Institute of Technology's Jet Propulsion Laboratory undera contract with the National Aeronautics and Space Administration's Cryosphere Science Program.

The Effects of Problem Solving Applications on the Development of Science Process Skills, Logical Thinking Skills and Perception on Problem Solving Ability in the Science Laboratory

Science.gov (United States)

Seyhan, Hatice Güngör

2015-01-01

This study was conducted with 98 prospective science teachers, who were composed of 50 prospective teachers that had participated in problem-solving applications and 48 prospective teachers who were taught within a more researcher-oriented teaching method in science laboratories. The first aim of this study was to determine the levels of…

Dental, Dental Hygiene, and Advanced Dental Students' Use, Knowledge, and Beliefs Regarding Tobacco Products.

Science.gov (United States)

Shearston, Jenni A; Shah, Krina; Cheng, Eric; Moosvi, Rizvan; Park, Su Hyun; Patel, Naiya; Spielman, Andrew I; Weitzman, Michael L

2017-11-01

Using cigarettes and alternative tobacco products (ATPs) is associated with negative oral health outcomes, and dental health professionals are poised to help patients quit. The aim of this study was to determine dental, dental hygiene, and advanced dental students' use, knowledge, and beliefs about cigarettes and ATPs, including perceptions about their education in tobacco dependence treatment and counseling experience. All 1,783 students enrolled in the dental, dental hygiene, and postdoctoral dental programs at the New York University College of Dentistry were invited to participate in the survey in 2016. A total of 708 students at least partially completed the survey, for a response rate of 39.7%. In the results, 146 of the students (20.1%) reported ever using cigarettes, while 253 (35.7%) reported ever using any ATP. Regarding tobacco use intervention, the students reported they had not received enough training on ATPs, were neutral about cigarettes, and were somewhat confident and not so confident counseling a cigarette smoker or ATP user, respectively. By their fourth year, 77.8% of the dental students reported they had counseled someone to stop smoking cigarettes, but only 40.7% had counseled someone to stop using ATPs. Overall, all groups of students reported feeling more confident and had received more education on interventions for cigarettes than for ATPs (ptobacco and did not perceive they had received enough training on intervening with patients on use of cigarettes and ATPs. These findings call for a revised tobacco education curriculum for dental, dental hygiene, and advanced dental students, focused on building knowledge and confidence for promoting tobacco dependence treatment.

Environment | Argonne National Laboratory

Science.gov (United States)

Skip to main content Argonne National Laboratory Toggle Navigation Toggle Search Energy Environment Laboratory About Safety News Careers Education Community Diversity Directory Energy Environment National Security User Facilities Science Work with Us Environment Atmospheric and Climate Science Ecological

42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section...

Opening the Big Black Box: European study reveals visitors' impressions of science laboratories

CERN Multimedia

2004-01-01

"On 29 - 30 March the findings of 'Inside the Big Black Box'- a Europe-wide science and society project - will be revealed during a two-day seminar hosted by CERN*. The principle aim of Inside the Big Black Box (IN3B) is to determine whether a working scientific laboratory can capture the curiosity of the general public through visits" (1 page)

Nigerian Journal of Health and Biomedical Sciences: Editorial Policies

African Journals Online (AJOL)

Biomedical Engineering Biotechnology in relation to Medicine Clinical Sciences Dental Sciences Environment and Health Health Economics and Management Health Information Management Hygiene and Health Education Legal Aspects of Healthcare Medical Education Nursing Sciences Pharmaceutical Sciences

Automated Scheduling of Personnel to Staff Operations for the Mars Science Laboratory

Science.gov (United States)

Knight, Russell; Mishkin, Andrew; Allbaugh, Alicia

2014-01-01

Leveraging previous work on scheduling personnel for space mission operations, we have adapted ASPEN (Activity Scheduling and Planning Environment) [1] to the domain of scheduling personnel for operations of the Mars Science Laboratory. Automated scheduling of personnel is not new. We compare our representations to a sampling of employee scheduling systems available with respect to desired features. We described the constraints required by MSL personnel schedulers and how each is handled by the scheduling algorithm.

Nano materials for Medical and Dental Applications

International Nuclear Information System (INIS)

Yub Kwon, T.; Oh, D.S.; Narayanan, R.

2015-01-01

Welcome to this special issue. Nano science and nano technology concepts are applicable across all fields of science and a more widespread application of nano materials and nano technologies is imminent or already occurring in many areas, including health care. Today is scientists take those cutting-edge technologies and concepts and apply them to medicine and dentistry. They are finding a wide variety of ways to make medical and dental materials at the nano scale to take advantage of their enhanced physical and biological properties.The purpose of this special issue is to publish high-quality research papers as well as review articles addressing recent advances in the field of nano materials for medical and dental applications. A particular interest is given to papers exploring or discussing nano materials and nano technologies related to delivery system, bonding substitutes, and surface modification techniques applicable in these areas. For this special issue, several investigators were invited to contribute original research findings that can stimulate continuing efforts to understand the cutting-edge applications of nano materials in medicine and dentistry.

Science and production laboratories: integration between the industry and universities

International Nuclear Information System (INIS)

Anokhin, A.N.; Sivokon', V.P.; Rakitin, I.D.

2010-01-01

Industry laboratories provide students with an opportunity to resolve real serious tasks and be exposed to a wide range of professional activities. Staffing in the Russian nuclear industry is a serious concern. There is a shortage of experienced specialists, and it is impossible to train a replacement for them quickly. Creation of a true professional is a long and thorough process, whereby the amount of knowledge and experience very slowly transforms into quality of performance. The authors underline that the teacher of a modern technical university should not and must not act as a middle man between the textbook and the students. The teacher must instead become a holder of the latest technological knowledge, which he will pass to students during lessons. The authors report on the ERGOLAB, a problematic science and research laboratory for ergonomic research and development in the nuclear field. Ergonomic support is one of the more important factors in the prevention of human errors, maintenance of professional health and improvement of performance efficiency [ru

Evaluation of digital dental models obtained from dental cone-beam computed tomography scan of alginate impressions.

Science.gov (United States)

Jiang, Tingting; Lee, Sang-Mi; Hou, Yanan; Chang, Xin; Hwang, Hyeon-Shik

2016-05-01

To investigate the dimensional accuracy of digital dental models obtained from the dental cone-beam computed tomography (CBCT) scan of alginate impressions according to the time elapse when the impressions are stored under ambient conditions. Alginate impressions were obtained from 20 adults using 3 different alginate materials, 2 traditional alginate materials (Alginoplast and Cavex Impressional) and 1 extended-pour alginate material (Cavex ColorChange). The impressions were stored under ambient conditions, and scanned by CBCT immediately after the impressions were taken, and then at 1 hour intervals for 6 hours. After reconstructing three-dimensional digital dental models, the models were measured and the data were analyzed to determine dimensional changes according to the elapsed time. The changes within the measurement error were regarded as clinically acceptable in this study. All measurements showed a decreasing tendency with an increase in the elapsed time after the impressions. Although the extended-pour alginate exhibited a less decreasing tendency than the other 2 materials, there were no statistically significant differences between the materials. Changes above the measurement error occurred between the time points of 3 and 4 hours after the impressions. The results of this study indicate that digital dental models can be obtained simply from a CBCT scan of alginate impressions without sending them to a remote laboratory. However, when the impressions are not stored under special conditions, they should be scanned immediately, or at least within 2 to 3 hours after the impressions are taken.

Application of X-rays to dental age estimation in medico-legal practice

Directory of Open Access Journals (Sweden)

Dorota Lorkiewicz-Muszyńska

2015-05-01

Full Text Available Aim of the study: The paper addresses the use of dental age assessment methods based on radiographs in medico-legal practice. Different cases of practical application of the methods are presented including identification of human remains, dental age assessment in a living person and one archaeological case. Material and methods : The study material consisted of cases involving dental age assessment performed in the Department of Forensic Medicine, Poznan University of Medical Sciences in Poznan. Depending on the preliminary assessment of age, the Liversidge or the Kvaal et al. methods were applied. Dental age was estimated on the basis of available pantomograms. In the case of the living person, it was a radiograph supplied for expert evaluation. In the other cases, dental computed tomography was performed. Results : Dental age was successfully estimated in all of the cases. Various methods based on the analysis of X-ray images were applied. Dental age was shown to be correlated with skeletal age. Conclusions : The methods based on radiographs were demonstrated to be useful, and the results they yield are fully correlated with results of anthropological analyses.

Technology is a critical game changer to the practice of dental hygiene.

Science.gov (United States)

Gadbury-Amyot, Cynthia C

2014-06-01

Dental hygienists will need to embrace 21st century technology to adapt to workplace settings. To stay relevant in the workforce, dental hygienists need mastery of new skills and technologies. The purpose of this paper is to elucidate the vast array of technological advances impacting dental practice and the consequent implications for oral health care providers. New technologies have provided unparalleled opportunities for degree and career advancement for dental hygienists. Advances in science and technology are providing patients with better quality and more convenient oral health care. Dental hygienists need technological skills that enable them to fully utilize technology as a strategy for consultation with dentists and other health care professionals and for other purposes. Continuing education and life-long learning factor into preparing dental hygienists for 21st century technologies. With technological advances, less adaptive professionals could potentially see a decrease in demand for their services. Possessing a high level of knowledge of dentistry and dental hygiene does not ensure a position in the workforce. Knowledge of technologies and associated skills are required for quality patient care and career and personal growth. Copyright © 2014 Elsevier Inc. All rights reserved.

Using Evernote as an electronic lab notebook in a translational science laboratory.

Science.gov (United States)

Walsh, Emily; Cho, Ilseung

2013-06-01

Electronic laboratory notebooks (ELNs) offer significant advantages over traditional paper laboratory notebooks (PLNs), yet most research labs today continue to use paper documentation. While biopharmaceutical companies represent the largest portion of ELN users, government and academic labs trail far behind in their usage. Our lab, a translational science laboratory at New York University School of Medicine (NYUSoM), wanted to determine if an ELN could effectively replace PLNs in an academic research setting. Over 6 months, we used the program Evernote to record all routine experimental information. We also surveyed students working in research laboratories at NYUSoM on the relative advantages and limitations of ELNs and PLNs and discovered that electronic and paper notebook users alike reported the inability to freehand into a notebook as a limitation when using electronic methods. Using Evernote, we found that the numerous advantages of ELNs greatly outweighed the inability to freehand directly into a notebook. We also used imported snapshots and drawing program add-ons to obviate the need for freehanding. Thus, we found that using Evernote as an ELN not only effectively replaces PLNs in an academic research setting but also provides users with a wealth of other advantages over traditional paper notebooks.

Survey on the use of CAD-CAM technology by UK and Irish dental technicians.

Science.gov (United States)

Blackwell, E; Nesbit, M; Petridis, H

2017-05-12

Statement of the problem Digital workflows (CAD/CAM) have been introduced in dentistry during recent years. No published information exists on dental technicians' use and reporting of this technology.Purpose The aim of this cross sectional survey was to identify the extent digital technology has infiltrated the workplace and to investigate the factors affecting the use of CAD-CAM technology by dental laboratory technicians within Ireland and the UK.Materials and methods A web-based questionnaire was composed (Opinio, Object Planet Inc. Oslo, Norway) and distributed to UK and Irish dental technicians. Answers to all questions were anonymous and grouped such that general information was gathered initially, followed by branching of the survey into two sections depending on whether or not the respondent worked with CAD-CAM technology. Results were compiled and statistical analysis (Fisher's Exact test, SPSS, IBM, Armonk, New York, USA) was performed in order to investigate any correlation between various demographic variables and the answers provided.Results The survey was distributed to 760 UK technicians and 77 Irish technicians. The total number of completed surveys was 105, which yielded a total response rate of 14%. Most technicians reported using some form of CAD/CAM aspect in the workflow, and this was more significant for technicians working in large laboratories. Most training received was company-led. Large laboratories were also significantly correlated with less outsourcing of CAD/CAM work and a change in dental material use leading to the increase of zirconia and the decrease of noble alloys. Dental technicians did not report any significant change in working relationships and staffing as a result of CAD/CAM incorporation. High initial investment cost was the most common reason quoted from non-users, along with the lack of such technology in their working environment.

Does dental caries affect dental development in children and adolescents?

Science.gov (United States)

Dhamo, Brunilda; Elezi, Besiana; Kragt, Lea; Wolvius, Eppo B; Ongkosuwito, Edwin M

2018-01-01

Although a link between dietary changes, caries, and dental development has been observed, the literature provides little insight about this relationship. The aim of our study was to investigate the association between dental caries and dental development in a clinical sample of Albanian children and adolescents. In total, 118 children and adolescents, born between 1995 and 2004 and aged 6–15 years, were included. Dental caries in the deciduous dentition was assessed using the Decayed, Filled Teeth (dft) index and dental caries in the permanent dentition was assessed using the Decayed, Missing, Filled Teeth (DMFT) index. Dental development during the permanent dentition was determined using the Demirjian method. Linear and ordinal regression models were applied to analyze the associations of dental caries with dental age and developmental stages of each left mandibular tooth. Dental caries in the deciduous dentition, estimated as a median dft of 2.0 (90% range, 0.0–9.1), was significantly associated with lower dental age (β = -0.21; 90% CI: -0.29, -0.12) and with delayed development of the canine, both premolars, and the second molar. Untreated dental caries (dt) was associated with lower dental age (β = -0.19; 90% CI: -0.28, -0.10). Dental caries in the permanent dentition, estimated as a median DMFT of 1.0 (90% range, 0.0–8.0), was not significantly associated with dental age (β = 0.05; 90% CI: -0.04, 0.14). However, the DMFT was associated with the advanced stages of development of both premolars and the second molar. The untreated dental caries in the deciduous dentition delays the development of permanent teeth. PMID:29659350

Analysis of dental caries using generalized linear and count regression models

Directory of Open Access Journals (Sweden)

Javali M. Phil

2013-11-01

Full Text Available Generalized linear models (GLM are generalization of linear regression models, which allow fitting regression models to response data in all the sciences especially medical and dental sciences that follow a general exponential family. These are flexible and widely used class of such models that can accommodate response variables. Count data are frequently characterized by overdispersion and excess zeros. Zero-inflated count models provide a parsimonious yet powerful way to model this type of situation. Such models assume that the data are a mixture of two separate data generation processes: one generates only zeros, and the other is either a Poisson or a negative binomial data-generating process. Zero inflated count regression models such as the zero-inflated Poisson (ZIP, zero-inflated negative binomial (ZINB regression models have been used to handle dental caries count data with many zeros. We present an evaluation framework to the suitability of applying the GLM, Poisson, NB, ZIP and ZINB to dental caries data set where the count data may exhibit evidence of many zeros and over-dispersion. Estimation of the model parameters using the method of maximum likelihood is provided. Based on the Vuong test statistic and the goodness of fit measure for dental caries data, the NB and ZINB regression models perform better than other count regression models.

Dental formulations for the prevention of dental erosion

DEFF Research Database (Denmark)

2010-01-01

The invention relates to a therapeutic method for preventing and/or inhibiting dental erosion in a mammalian subject, and the provision of a dental care product for performing the method. The dental care product of the invention comprises a starch-degrading enzyme of E. C. 3.2.1.1, wherein said...... product comprises less than 1 wt.% ionic surfactant, and preferably is substantially free of endoprotease and/or lipase. The properties of the dental care product serve to prevent and/or inhibit dental erosion in a subject that typically results from repeated exposure of the patient's tooth surfaces...

Preparing clinical laboratory science students with teaching skills.

Science.gov (United States)

Isabel, Jeanne M

2010-01-01

Training clinical laboratory science (CLS) students in techniques of preparation and delivery of an instructional unit is an important component of all CLS education programs and required by the national accrediting agency. Participants of this study included students admitted to the CLS program at Northern Illinois University and enrolled in the teaching course offered once a year between the years of 1997 and 2009. Courses on the topic of "teaching" may be regarded by CLS students as unnecessary. However, entry level practitioners are being recruited to serve as clinical instructors soon after entering the workforce. Evaluation of the data collected indicates that students are better prepared to complete tasks related to instruction of a topic after having an opportunity to study and practice skills of teaching. Mentoring CLS students toward the career role of clinical instructor or professor is important to maintaining the workforce.

Inquiry-based laboratory and History of Science: a report about an activity using Oersted’s experiment

Directory of Open Access Journals (Sweden)

José Antonio Ferreira Pinto

2017-05-01

Full Text Available This work presents an example of how to explore an historical experiment as a problem to be investigated in an inquiry-based laboratory model. The elaborated and executed purpose is one of the possibilities to insert History of Science in Science classroom. The inquiry-based experimental activity, the texts with historical approach based on modern historiography of science and teacher’s pedagogical knowledge allowed the development of argumentative skills and the comprehension of electromagnetism concepts. This study was developed with 3rd grade high school students from a public school of State of Paraiba.

Does use of an electronic health record with dental diagnostic system terminology promote dental students' critical thinking?

Science.gov (United States)

Reed, Susan G; Adibi, Shawn S; Coover, Mullen; Gellin, Robert G; Wahlquist, Amy E; AbdulRahiman, Anitha; Hamil, Lindsey H; Walji, Muhammad F; O'Neill, Paula; Kalenderian, Elsbeth

2015-06-01

The Consortium for Oral Health Research and Informatics (COHRI) is leading the way in use of the Dental Diagnostic System (DDS) terminology in the axiUm electronic health record (EHR). This collaborative pilot study had two aims: 1) to investigate whether use of the DDS terms positively impacted predoctoral dental students' critical thinking skills measured by the Health Sciences Reasoning Test (HSRT), and 2) to refine study protocols. The study design was a natural experiment with cross-sectional data collection using the HSRT for 15 classes (2013-17) of students at three dental schools. Characteristics of students who had been exposed to the DDS terms were compared with students who had not, and the differences were tested by t-tests or chi-square tests. Generalized linear models were used to evaluate the relationship between exposure and outcome on the overall critical thinking score. The results showed that exposure was significantly related to overall score (p=0.01), with not-exposed students having lower mean overall scores. This study thus demonstrated a positive impact of using the DDS terminology in an EHR on the critical thinking skills of predoctoral dental students in three COHRI schools as measured by their overall score on the HSRT. These preliminary findings support future research to further evaluate a proposed model of critical thinking in clinical dentistry.

Does Use of an Electronic Health Record with Dental Diagnostic System Terminology Promote Dental Students’ Critical Thinking?

Science.gov (United States)

Reed, Susan G.; Adibi, Shawn S.; Coover, Mullen; Gellin, Robert G.; Wahlquist, Amy E.; AbdulRahiman, Anitha; Hamil, Lindsey H.; Walji, Muhammad F.; O’Neill, Paula; Kalenderian, Elsbeth

2015-01-01

The Consortium for Oral Health Research and Informatics (COHRI) is leading the way in use of the Dental Diagnostic System (DDS) terminology in the axiUm electronic health record (EHR). This collaborative pilot study had two aims: 1) to investigate whether use of the DDS terms positively impacted predoctoral dental students’ critical thinking skills measured by the Health Sciences Reasoning Test (HSRT), and 2) to refine study protocols. The study design was a natural experiment with cross-sectional data collection using the HSRT for 15 classes (2013–17) of students at three dental schools. Characteristics of students who had been exposed to the DDS terms were compared with students who had not, and the differences were tested by t-tests or chi-square tests. Generalized linear models were used to evaluate the relationship between exposure and outcome on the overall critical thinking score. The results showed that exposure was significantly related to overall score (p=0.01), with not-exposed students having lower mean overall scores. This study thus demonstrated a positive impact of using the DDS terminology in an EHR on the critical thinking skills of predoctoral dental students in three COHRI schools as measured by their overall score on the HSRT. These preliminary findings support future research to further evaluate a proposed model of critical thinking in clinical dentistry. PMID:26034034

Practical Environmental Education and Local Contribution in the Environmental Science Laboratory Circle in the College of Science and Technology in Nihon University

Science.gov (United States)

Taniai, Tetsuyuki; Ito, Ken-Ichi; Sakamaki, Hiroshi

In this paper, we presented a method and knowledge about a practical and project management education and local contribution obtained through the student activities of “Environmental science laboratory circle in the College of Science and technology in Nihon University” from 1991 to 2001. In this circle, four major projects were acted such as research, protection, clean up and enlightenment projects. Due to some problems from inside or outside of this circle, this circle projects have been stopped. The diffusion and popularization of the internet technology will help to resolve some of these problems.

Patients' satisfaction with dental care provided by public dental ...

African Journals Online (AJOL)

Background: In Tanzania, patient satisfaction with dental services has received only minor attention. Objective: To assess patients' satisfaction with public dental health services in Dar es Salaam. Design: A cross-sectional study. Setting: Five public dental clinics randomly selected from a list of all the nine public dental ...

Improving the Medical Curriculum in Predoctoral Dental Education: Recommendations From the American Association of Oral and Maxillofacial Surgeons Committee on Predoctoral Education and Training.

Science.gov (United States)

Dennis, Matthew J; Bennett, Jeffrey D; DeLuke, Dean M; Evans, Erik W; Hudson, John W; Nattestad, Anders; Ness, Gregory M; Yeung, Allison

2017-02-01

Dental procedures are often performed on patients who present with some level of medical fragility. In many dental schools, the exercise of taking a medical history is all too often a transcription of information to the dental chart, with little emphasis on the presurgical risk assessment and the development of a treatment plan appropriate to the medical status of the dental patient. Changes in dentistry, driven by an increasingly medically complex population of dental patients, combined with treatment advances rooted in the biomedical sciences necessitate the adaptation of our dental education to include a stronger background in systemic health. Many predoctoral educators in the American Association of Oral and Maxillofacial Surgeons (AAOMS) have expressed concern about the medical preparedness of our dental students; therefore, the AAOMS and its Committee on Predoctoral Education and Training have provided recommendations for improving the medical curriculum in predoctoral dental education, including a strengthening of training in clinical medicine and biomedical sciences, with specific recommendations for improved training of our dental students and dental faculty. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Psychological distress and its correlates among dental students: a survey of 17 Colombian dental schools.

Science.gov (United States)

Divaris, Kimon; Mafla, Ana Cristina; Villa-Torres, Laura; Sánchez-Molina, Marisol; Gallego-Gómez, Clara Liliana; Vélez-Jaramillo, Luis Fernando; Tamayo-Cardona, Julián Andrés; Pérez-Cepeda, David; Vergara-Mercado, Martha Ligia; Simancas-Pallares, Miguel Ángel; Polychronopoulou, Argy

2013-06-26

Links between the demanding nature of studies in the health sciences, students' personality traits and psychological distress have been well-established. While considerable amount of work has been done in medicine, evidence from the dental education arena is sparse and data from Latin America are lacking. The authors conducted a large-scale investigation of psychological distress among dental students in Colombia and sought to determine its curriculum and student-level correlates. The Spanish version of the Derogatis' Symptoms Checklist Revised (SCL-90-R) was administered to all students officially registered and attending classes or clinics in 17 dental schools in 4 geographic districts of Colombia between January and April 2012. Additional information was collected on participants' socio-demographic information and first career choice, as well as school's characteristics such as class size. The Global Severity Index (GSI) score, a measure of overall psychological distress, served as the primary analytical endpoint. Analyses relied on multilevel mixed-effects linear and log-binomial regression, accounting for study design and sample characteristics. A total of 5700 dental students completed the survey, a response rate of 67%. Pronounced gradients were noted in the association between socio-economic status and psychological distress, with students in higher strata reporting fewer problems. After adjustment for all important covariates, there was an evident pattern of increasing psychological distress corresponding to the transition from the didactic, to the preclinical and clinical phases of training, with few differences between male and female students. Independent of other factors, reliance on own funds for education and having dentistry as the first career choice were associated with lower psychological distress. Levels of psychological distress correlated with students' socio-economic and study-level characteristics. Above and beyond the influence of person

Description and Documentation of the Dental School Dental Delivery System.

Science.gov (United States)

Chase, Rosen and Wallace, Inc., Alexandria, VA.

A study was undertaken to describe and document the dental school dental delivery system using an integrated systems approach. In late 1976 and early 1977, a team of systems analysts and dental consultants visited three dental schools to observe the delivery of dental services and patient flow and to interview administrative staff and faculty.…

Dental anxiety and salivary cortisol levels before urgent dental care.

Science.gov (United States)

Kanegane, Kazue; Penha, Sibele S; Munhoz, Carolina D; Rocha, Rodney G

2009-12-01

Dental anxiety is still prevalent, despite advances in treatment, and affects the utilization of health care services. The purpose of this cross-sectional study was to determine if patients with different degrees of dental anxiety and pain undergoing emergency dental care have different stress reactions as measured by salivary cortisol. Seventy three patients completed the modified dental anxiety scale (MDAS), and described any previous dental traumatic experience. Their socio-demographic characteristics were also recorded. They also rated pain intensity on a 100 mm visual analogue scale (VAS). A saliva sample was collected before the procedure, and analyzed by enzyme immunoassay. Thirty patients were dentally anxious and forty one complained of pain. In this sample, dental anxiety was not related to gender, age, educational level and family income; however, a previous traumatic event was related to dental anxiety. There was no association between salivary cortisol concentrations and gender or dental anxiety. Patients with pain showed higher cortisol levels. When gathering patient information, the dentist should note patients' negative dental experiences in order to provide more effective, less traumatic treatment.

Use of simulators in operative dental education: experience in ...

African Journals Online (AJOL)

Abstract: Background: Though the use of simulators in operative dentistry is not new, the teaching and learning practices that take place during clinical sessions in skills laboratories are rarely reported. This study was designed to determine the current prac- tices relating to teaching and learning of dental clinical skills in ...

Awareness of basic life support among dental practitioners.

Science.gov (United States)

Baduni, Neha; Prakash, Prem; Srivastava, Dhirendra; Sanwal, Manoj Kumar; Singh, Bijender Pal

2014-01-01

It is important that every member of our community should be trained in effective BLS technique to save lives. At least doctors including dental practitioners, and medical and paramedical staff should be trained in high quality CPR, as it is a basic medical skill which can save many lives if implemented timely. Our aim was to study the awareness of Basic Life Support (BLS) among dental students and practitioners in New Delhi. This cross sectional study was conducted by assessing responses to 20 selected questions pertaining to BLS among dental students, resident doctors/tutors, faculty members and private practitioners in New Delhi. All participants were given a printed questionnaire where they had to mention their qualifications and clinical experience, apart from answering 20 questions. Data was collected and evaluated using commercially available statistical package for social sciences (SPSS version 12). One hundred and four responders were included. Sadly, none of our responders had complete knowledge about BLS. The maximum mean score (9.19 ± 1.23) was obtained by dentists with clinical experience between 1-5 years. To ensure better and safer healthcare, it is essential for all dental practitioners to be well versed with BLS.

Virtual laboratory learning media development to improve science literacy skills of mechanical engineering students on basic physics concept of material measurement

Science.gov (United States)

Jannati, E. D.; Setiawan, A.; Siahaan, P.; Rochman, C.

2018-05-01

This study aims to determine the description of virtual laboratory learning media development to improve science literacy skills of Mechanical Engineering students on the concept of basic Physics. Quasi experimental method was employed in this research. The participants of this research were first semester students of mechanical engineering in Majalengka University. The research instrument was readability test of instructional media. The results of virtual laboratory learning media readability test show that the average score is 78.5%. It indicates that virtual laboratory learning media development are feasible to be used in improving science literacy skill of Mechanical Engineering students in Majalengka University, specifically on basic Physics concepts of material measurement.

Dental anxiety among university students and its correlation with their field of study.

Science.gov (United States)

Al-Omari, Wael Mousa; Al-Omiri, Mahmoud Khalid

2009-01-01

This study was designed to investigate the subjective ratings of dental anxiety levels among university students enrolled at Jordan University of Science and Technology. In addition, the present study aimed to explore the sources of dental anxiety and the impact of gender on the perceived dental anxiety and the correlation between field of study and dental anxiety level. The Modified Corah Dental Anxiety Scale was used to measure dental anxiety among the study population. Six hundred subjects were recruited into the study from Jordanian undergraduate students from the faculties of Medicine, Engineering, and Dentistry. Five hundred and thirty five complete questionnaires were returned, which accounts for a response rate of 89.2%. The totals of the mean anxiety scores were the following: Medical students, 13.58%; Engineering students, 13.27% and dental students, 11.22%. About 32% of the study population has scored 15 or more. Dental students had the lowest percentage of those who scored 15 or more. Surprisingly, the medical students were responsible for the highest percentage of those who scored 15 or above. Although women demonstrated statistically higher total dental anxiety scores than men (p= 0.03), the difference between both genders was small and could be clinically insignificant. The students were anxious mostly about tooth drilling and local anesthetic injection. Lack of adequate dental health education may result in a high level of dental anxiety among non-dental university students in Jordan. Further studies are required to identify the correlates of dental anxiety among university students.

Quality-Assurance Plan for the Analysis of Fluvial Sediment by the U. S. Geological Survey Kentucky Water Science Center Sediment Laboratory

National Research Council Canada - National Science Library

Shreve, Elizabeth A; Downs, Aimee C

2005-01-01

This report describes laboratory procedures used by the U. S. Geological Survey Kentucky Water Science Center Sediment Laboratory for the processing and analysis of fluvial sediment samples for concentration of sand and finer material...

Awareness of dental implants among dental patients in Nigeria ...

African Journals Online (AJOL)

The aim of this study was to determine the level of awareness of dental implant in Nigerian patients and their willingness to choose dental implant as a tooth replacement option. A survey was conducted among patients presenting for dental treatment in 3 teaching hospitals and private dental clinics in 3 urban cities of ...

Relationship Between Dental Hygiene Students' Performance in an Oral Radiology Course and the National Board Dental Hygiene Examination: A Retrospective Study.

Science.gov (United States)

Liang, Hui; DeWald, Janice P; Solomon, Eric S

2018-02-01

Dental hygiene students' performance in oral radiology courses may give an early indication of their readiness prior to taking the National Board Dental Hygiene Examination (NBDHE). The aim of this study was to determine the relationship between dental hygiene students' performance in an oral radiology lecture course and their performance on the NBDHE. Data were collected for all 117 dental hygiene students at Texas A&M University College of Dentistry from 2006 to 2009 who took the NBDHE during their second year of the program. Their final grades and scores on three written section examinations in an oral radiology course taken in their first year were compared with their overall NBDHE scores and raw scores on the oral radiology and case study sections. Moderate correlations (0.3radiology course, with the strongest correlation with the final grade (r=0.488, pradiology, followed by scores in anatomic sciences; the weakest relationship was with scores in pharmacology. This relationship can help identify students who may need extra support in the oral radiology course and other courses to prepare them to succeed when they take the NBDHE. This study also contributes to understanding of the general relationship between dental hygiene program courses and students' success on the clinical licensing exam and will hopefully encourage other programs to assess their students' performance in this way.

Dental, Dental Hygiene, and Graduate Students' and Faculty Perspectives on Dental Hygienists' Professional Role and the Potential Contribution of a Peer Teaching Program.

Science.gov (United States)

McComas, Martha J; Inglehart, Marita R

2016-09-01

The changing role of dental hygienists deserves dental and dental hygiene educators' attention. The first aim of this survey study was to assess University of Michigan dental, dental hygiene, and graduate students' and faculty members' perceptions of dental hygienists' roles; their attitudes and behaviors related to clinical interactions between dental and dental hygiene students; and perceived benefits of engaging dental hygiene students as peer teachers for dental students. The second aim was to assess whether one group of dental students' experiences with dental hygiene student peer teaching affected their perceptions of the dental hygiene profession. Survey respondents were 57 dental hygiene students in all three years of the program (response rate 60% to 100%); 476 dental students in all four years (response rate 56% to 100%); 28 dental and dental hygiene graduate students (response rate 28%); and 67 dental and dental hygiene faculty members (response rate 56%). Compared to the other groups, dental students reported the lowest average number of services dental hygienists can provide (p≤0.001) and the lowest average number of patient groups for which dental hygienists can provide periodontal care (ppeer teaching (ppeer teaching. After experiencing dental hygiene student peer teaching, the dental students' perceptions of dental hygienists' roles, attitudes about clinical interactions with dental hygienists, and perceived benefits of dental hygiene student peer teachers improved and were more positive than the responses of their peers with no peer teaching experiences. These results suggest that dental hygiene student peer teaching may improve dental students' perceptions of dental hygienists' roles and attitudes about intraprofessional care.

Discourse, Power, and Knowledge in the Management of "Big Science": The Production of Consensus in a Nuclear Fusion Research Laboratory.

Science.gov (United States)

Kinsella, William J.

1999-01-01

Extends a Foucauldian view of power/knowledge to the archetypical knowledge-intensive organization, the scientific research laboratory. Describes the discursive production of power/knowledge at the "big science" laboratory conducting nuclear fusion research and illuminates a critical incident in which the fusion research…

The path to the future: The role of science and technology at Argonne National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Reck, R.A.

1996-04-30

Today some scientists are concerned that present budget considerations in Washington will make it impossible for the US to maintain its preeminence in important areas of science and technology. In the private sector there has been a demise of substantive R & D efforts through most of the major industries. For DOE a lack of future support for science and technology would be an important issue because this could impact DOE`s abilities to solve problems in its major areas of concern, national security, energy, environment. In fact some scientists maintain that were the present trend to continue unabated it could lead to a national security issue. Preeminence in science and technology plays a critical role in our nation`s position as the leader of world democracy. In contrast with this point of view of gloom and doom, however, in this presentation I hope to bring to you what I see as an exciting message of good news. Today I will list the important opportunities and challenges for the future that I note for ANL, the leadership role that I believe ANL can play and the qualities that will help our laboratory to maintain its status as an outstanding DOE National Laboratory.

Concepts in critical thinking applied to caries risk assessment in dental education.

Science.gov (United States)

Guzman-Armstrong, Sandra; Warren, John J; Cunningham-Ford, Marsha A; von Bergmann, HsingChi; Johnsen, David C

2014-06-01

Much progress has been made in the science of caries risk assessment and ways to analyze caries risk, yet dental education has seen little movement toward the development of frameworks to guide learning and assess critical thinking in caries risk assessment. In the absence of previous proactive implementation of a learning framework that takes the knowledge of caries risk and critically applies it to the patient with the succinctness demanded in the clinical setting, the purpose of this study was to develop a model learning framework that combines the science of caries risk assessment with principles of critical thinking from the education literature. This article also describes the implementation of that model at one dental school and presents some preliminary assessment data.

Laboratory directed research and development

Energy Technology Data Exchange (ETDEWEB)

1991-11-15

The purposes of Argonne's Laboratory Directed Research and Development (LDRD) Program are to encourage the development of novel concepts, enhance the Laboratory's R D capabilities, and further the development of its strategic initiatives. Among the aims of the projects supported by the Program are establishment of engineering proof-of-principle''; development of an instrumental prototype, method, or system; or discovery in fundamental science. Several of these project are closely associated with major strategic thrusts of the Laboratory as described in Argonne's Five Year Institutional Plan, although the scientific implications of the achieved results extend well beyond Laboratory plans and objectives. The projects supported by the Program are distributed across the major programmatic areas at Argonne. Areas of emphasis are (1) advanced accelerator and detector technology, (2) x-ray techniques in biological and physical sciences, (3) advanced reactor technology, (4) materials science, computational science, biological sciences and environmental sciences. Individual reports summarizing the purpose, approach, and results of projects are presented.

Dental age estimation by Demirjian′s and Nolla′s method: A comparative study among children attending a dental college in Lucknow (UP

Directory of Open Access Journals (Sweden)

Shruti Sinha

2014-01-01

Full Text Available Introduction: Estimation of age is an important aspect of forensic science. The assessment of age is useful in forensic odontology and in treatments plans of orthodontic and pedodontic patients. Aims and Objectives: The aim of the study was to determine dental age from orthopantomograph using Demirjian′s method and Nolla′s method. It was also to evaluate the interrelationship between chronological and dental age according to both these methods and to evaluate which technique was better. Materials and Methods: The study was conducted in the Department of Oral Medicine and Radiology of Babu Banarasi Das College of Dental Sciences (UP, Northern India. A total of 300 subjects (150 girls and 150 boys of age group from 6 years to 15 years were enrolled. These subjects were grouped by a difference of 1 year into 10 groups (each group comprised of 30 subjects: 15 males and 15 females. For every individual included in the study a panoramic radiograph was taken, with standard parameters and adequate protective measures. Results: The results imply that Demirjian′s method is applicable to all age groups and for both genders with better accuracy than Nolla′s method, which had a limited utility in younger age group. Thus Demirjian′s method is a better method when compared to Nolla′s method in Northern Indian population.

Dental Workforce Availability and Dental Services Utilization in Appalachia: A Geospatial Analysis

Science.gov (United States)

Feng, Xue; Sambamoorthi, Usha; Wiener, R. Constance

2016-01-01

Objectives There is considerable variation in dental services utilization across Appalachian counties, and a plausible explanation is that individuals in some geographical areas do not utilize dental care due to dental workforce shortage. We conducted an ecological study on dental workforce availability and dental services utilization in Appalachia. Methods We derived county-level (n = 364) data on demographic, socio-economic characteristics and dental services utilization in Appalachia from the 2010 Behavioral Risk Factor Surveillance System (BRFSS) using person-level data. We obtained county-level dental workforce availability and physician-to-population ratio estimates from Area Health Resource File, and linked them to the county-level BRFSS data. The dependent variable was the proportion using dental services within the last year in each county (ranging from 16.6% to 91.0%). We described the association between dental workforce availability and dental services utilization using ordinary least squares regression and spatial regression techniques. Spatial analyses consisted of bivariate Local Indicators of Spatial Association (LISA) and geographically weighted regression (GWR). Results Bivariate LISA showed that counties in the central and southern Appalachian regions had significant (p dental workforce availability, low percent dental services utilization). GWR revealed considerable local variations in the association between dental utilization and dental workforce availability. In the multivariate GWR models, 8.5% (t-statistics >1.96) and 13.45% (t-statistics >1.96) of counties showed positive and statistically significant relationships between the dental services utilization and workforce availability of dentists and dental hygienists, respectively. Conclusions Dental workforce availability was associated with dental services utilization in the Appalachian region; however, this association was not statistically significant in all counties. The findings suggest

Advancing Space Sciences through Undergraduate Research Experiences at UC Berkeley's Space Sciences Laboratory - a novel approach to undergraduate internships for first generation community college students

Science.gov (United States)

Raftery, C. L.; Davis, H. B.; Peticolas, L. M.; Paglierani, R.

2015-12-01

The Space Sciences Laboratory at UC Berkeley launched an NSF-funded Research Experience for Undergraduates (REU) program in the summer of 2015. The "Advancing Space Sciences through Undergraduate Research Experiences" (ASSURE) program recruited heavily from local community colleges and universities, and provided a multi-tiered mentorship program for students in the fields of space science and engineering. The program was focussed on providing a supportive environment for 2nd and 3rd year undergraduates, many of whom were first generation and underrepresented students. This model provides three levels of mentorship support for the participating interns: 1) the primary research advisor provides academic and professional support. 2) The program coordinator, who meets with the interns multiple times per week, provides personal support and helps the interns to assimilate into the highly competitive environment of the research laboratory. 3) Returning undergraduate interns provided peer support and guidance to the new cohort of students. The impacts of this program on the first generation students and the research mentors, as well as the lessons learned will be discussed.

Pacific Northwest Laboratory annual report for 1993 to the DOE Office of Energy Research. Part 1: Biomedical Sciences

Energy Technology Data Exchange (ETDEWEB)

Lumetta, C.C. [ed.; Park, J.F.

1994-03-01

This report summarizes FY 1993 progress in biological and general life sciences research programs conducted for the Department of Energy`s Office of Health and Environmental REsearch (OHER) at Pacific Northwest Laboratory (PNL). This research provides knowledge of fundamental principles necessary to identify, understand, and anticipate the long-term health consequences of exposure to energy-related radiation and chemicals. The Biological Research section contains reports of studies using laboratory animals, in vitro cell systems, and molecular biological systems. This research includes studies of the impact of radiation, radionuclides, and chemicals on biological responses at all levels of biological organization. The General Life Sciences Research section reports research conducted for the OHER human genome program.

Association between developmental defects of enamel and dental caries: A systematic review and meta-analysis.

Science.gov (United States)

Vargas-Ferreira, F; Salas, M M S; Nascimento, G G; Tarquinio, S B C; Faggion, C M; Peres, M A; Thomson, W M; Demarco, F F

2015-06-01

Dental caries is the main problem oral health and it is not well established in the literature if the enamel defects are a risk factor for its development. Studies have reported a potential association between developmental defects enamel (DDE) and dental caries occurrence. We investigated the association between DDE and caries in permanent dentition of children and teenagers. A systematic review was carried out using four databases (Pubmed, Web of Science, Embase, and Science Direct), which were searched from their earliest records until December 31, 2014. Population-based studies assessing differences in dental caries experience according to the presence of enamel defects (and their types) were included. PRISMA guidelines for reporting systematic reviews were followed. Meta-analysis was performed to assess the pooled effect, and meta-regression was carried out to identify heterogeneity sources. From the 2558 initially identified papers, nine studies fulfilled all inclusion criteria after checking the titles, abstracts, references, and complete reading. Seven of them were included in the meta-analysis with random model. A positive association between enamel defects and dental caries was identified; meta-analysis showed that individuals with DDE had higher pooled odds of having dental caries experience [OR 2.21 (95% CI 1.3; 3.54)]. Meta-regression analysis demonstrated that adjustment for sociodemographic factors, countries' socioeconomic status, and bias (quality of studies) explained the high heterogeneity observed. A higher chance of dental caries should be expected among individuals with enamel defects. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evaluation of digital dental models obtained from dental cone-beam computed tomography scan of alginate impressions

Science.gov (United States)

Jiang, Tingting; Lee, Sang-Mi; Hou, Yanan; Chang, Xin

2016-01-01

Objective To investigate the dimensional accuracy of digital dental models obtained from the dental cone-beam computed tomography (CBCT) scan of alginate impressions according to the time elapse when the impressions are stored under ambient conditions. Methods Alginate impressions were obtained from 20 adults using 3 different alginate materials, 2 traditional alginate materials (Alginoplast and Cavex Impressional) and 1 extended-pour alginate material (Cavex ColorChange). The impressions were stored under ambient conditions, and scanned by CBCT immediately after the impressions were taken, and then at 1 hour intervals for 6 hours. After reconstructing three-dimensional digital dental models, the models were measured and the data were analyzed to determine dimensional changes according to the elapsed time. The changes within the measurement error were regarded as clinically acceptable in this study. Results All measurements showed a decreasing tendency with an increase in the elapsed time after the impressions. Although the extended-pour alginate exhibited a less decreasing tendency than the other 2 materials, there were no statistically significant differences between the materials. Changes above the measurement error occurred between the time points of 3 and 4 hours after the impressions. Conclusions The results of this study indicate that digital dental models can be obtained simply from a CBCT scan of alginate impressions without sending them to a remote laboratory. However, when the impressions are not stored under special conditions, they should be scanned immediately, or at least within 2 to 3 hours after the impressions are taken. PMID:27226958

Engaging Non-Science Majors Through Citizen Science Projects In Inquiry-Based Introductory Geoscience Laboratory Courses

Science.gov (United States)

Humphreys, R. R.; Hall, C.; Colgan, M. W.; Rhodes, E.

2010-12-01

Although inquiry-based/problem-based methods have been successfully incorporated in undergraduate lecture classes, a survey of commonly used laboratory manuals indicates that few non-major geoscience laboratory classes use these strategies. The Department of Geology and Environmental Geosciences faculty members have developed a successful introductory Environmental Geology Laboratory course for undergraduate non-majors that challenges traditional teaching methodology as illustrated in most laboratory manuals. The Environmental Geology lab activities employ active learning methods to engage and challenge students. Crucial to establishing an open learning environment is capturing the attention of non-science majors from the moment they enter the classroom. We use catastrophic ‘gloom and doom’ current events to pique the imagination with images, news stories, and videos. Once our students are hooked, we can further the learning process with use of other teaching methods: an inquiry-based approach that requires students take control of their own learning, a cooperative learning approach that requires the participation of all team members in peer learning, and a problem/case study learning approach that primarily relies on activities distilled from current events. The final outcome is focused on creating innovative methods to communicate the findings to the general public. With the general public being the audience for their communiqué, students are less intimated, more focused, and more involved in solving the problem. During lab sessions, teams of students actively engage in mastering course content and develop essential communication skills while exploring real-world scenarios. These activities allow students to use scientific reasoning and concepts to develop solutions for scenarios such as volcanic eruptions, coastal erosion/sea level rise, flooding or landslide hazards, and then creatively communicate their solutions to the public. For example, during a two

Audit to assess the quality of communication between operators and technicians in a fixed prosthodontic laboratory: educational and training implications.

Science.gov (United States)

Dickie, J; Shearer, A C; Ricketts, D N J

2014-02-01

This audit aimed to assess the quality of communication between dental students/qualified dentists and dental technicians, increase the percentage of satisfactorily completed laboratory prescriptions and reduce the number of errors that can result from poor communication. A subsidiary aim was to educate students and staff in this respect. An audit of laboratory prescription completion was conducted within Dundee Dental Hospital. Four hundred and eighteen prescriptions for indirect fixed restorations completed by dental undergraduates and qualified staff were audited over a three month period (first audit cycle). Educational reminders on laboratory prescriptions were then provided to undergraduates and qualified staff, a further three hundred and twenty-two prescriptions were audited (second audit cycle) and compared with the first cycle. Satisfactorily completed prescriptions increased from 28% to 43% following basic educational intervention. However, this percentage still signifies a poor level of completion and the need for improvement. Some aspects of the prescription were completed better than others, but overall the standard remained poor with a significant number failing to comply with guidelines set by the UK General Dental Council, the European Union's Medical Devices Directive and the British Society for Restorative Dentistry (BSRD). Further undergraduate and staff training on laboratory prescription writing will be necessary through staff training events and developments in the undergraduate curriculum. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Danish dental education:

DEFF Research Database (Denmark)

Moore, Rod

1985-01-01

The effects of Danish cultural traditions on dental education in Denmark are described, as well as the system's current structure and developing issues. Some Danish ideas for future exports of dental education programs and dental personnel are also discussed.......The effects of Danish cultural traditions on dental education in Denmark are described, as well as the system's current structure and developing issues. Some Danish ideas for future exports of dental education programs and dental personnel are also discussed....

Interprofessional pharmacy observation activity for third-year dental students.

Science.gov (United States)

Conway, Susan E; Smith, Winter J; Truong, Teresa H; Shadid, Jill

2014-09-01

Interprofessional learning is a key component of today's health sciences education. Within a two-course series in dental pharmacology and therapeutics, a dental curriculum was revised to provide an interprofessional activity to expose dental students to a community pharmacy setting. The objectives of this activity were to augment students' learning about drug laws and prescription writing, as well as to foster interprofessional relationships and collaboration between pharmacists and dentists. Dental students were scheduled for one-hour observations at community pharmacies on campus. Learning objectives to guide this activity focused on demonstrating community pharmacy operating procedures, identifying ways to minimize prescribing and dosing errors, and understanding how pharmacists can assist dentists in prescribing. Following the observation, students were required to submit a written assignment, which accounted for 14 percent of their course grade. All 119 dental students (100 percent) enrolled in the course for the summers of 2012 and 2013 completed the activity. The average grade on the written assignment was 96.2 out of 100. At the end of the course, students were asked to participate in an online course evaluation survey, for which response rates were 37 percent and 43 percent for 2012 and 2013, respectively. The students rated the pharmacy observation activity favorably on this course evaluation. The pharmacy observation activity provided a successful interprofessional component to the didactic pharmacy course and was well received by the dental students as well as the community pharmacists.

Examining the Effects of Reflective Journals on Pre-Service Science Teachers' General Chemistry Laboratory Achievement

Science.gov (United States)

Cengiz, Canan; Karatas, Faik Özgür

2015-01-01

The general chemistry laboratory is an appropriate place for learning chemistry well. It is also effective for stimulating higher-order thinking skills, including reflective thinking, a skill that is crucial for science teaching as well as learning. This study aims to examine the effects of feedback-supported reflective journal-keeping activities…

Expanded function allied dental personnel and dental practice productivity and efficiency.

Science.gov (United States)

Beazoglou, Tryfon J; Chen, Lei; Lazar, Vickie F; Brown, L Jackson; Ray, Subhash C; Heffley, Dennis R; Berg, Rob; Bailit, Howard L

2012-08-01

This study examined the impact of expanded function allied dental personnel on the productivity and efficiency of general dental practices. Detailed practice financial and clinical data were obtained from a convenience sample of 154 general dental practices in Colorado. In this state, expanded function dental assistants can provide a wide range of reversible dental services/procedures, and dental hygienists can give local anesthesia. The survey identified practices that currently use expanded function allied dental personnel and the specific services/procedures delegated. Practice productivity was measured using patient visits, gross billings, and net income. Practice efficiency was assessed using a multivariate linear program, Data Envelopment Analysis. Sixty-four percent of the practices were found to use expanded function allied dental personnel, and on average they delegated 31.4 percent of delegatable services/procedures. Practices that used expanded function allied dental personnel treated more patients and had higher gross billings and net incomes than those practices that did not; the more services they delegated, the higher was the practice's productivity and efficiency. The effective use of expanded function allied dental personnel has the potential to substantially expand the capacity of general dental practices to treat more patients and to generate higher incomes for dental practices.

Mars Science Laboratory Differential Restraint: The Devil is in the Details

Science.gov (United States)

Jordan, Elizabeth

2012-01-01

The Differential Restraint, a mechanism used on the Mars Science Laboratory (MSL) rover to maintain symmetry of the mobility system during the launch, cruise, and entry descent and landing phases of the MSL mission, completed nearly three full design cycles before a finalized successful design was achieved. This paper address the lessons learned through these design cycles, including three major design elements that can easily be overlooked during the design process, including, tolerance stack contribution to load path, the possibility of Martian dirt as a failure mode, and the effects of material properties at temperature extremes.

The Laboratory of the Mind Thought Experiments in the Natural Sciences

CERN Document Server

Brown, James Robert

2010-01-01

Newton's bucket, Einstein's elevator, Schrödinger's cat - these are some of the best-known examples of thought experiments in the natural sciences. But what function do these experiments perform? Are they really experiments at all? Can they help us gain a greater understanding of the natural world?  How is it possible that we can learn new things just by thinking?   In this revised and updated new edition of his classic text The Laboratory of the Mind, James Robert Brown continues to defend apriorism in the physical world. This edition features two new chapters, one on "counter

Hypersonic and Supersonic Static Aerodynamics of Mars Science Laboratory Entry Vehicle

Science.gov (United States)

Dyakonov, Artem A.; Schoenenberger, Mark; Vannorman, John W.

2012-01-01

This paper describes the analysis of continuum static aerodynamics of Mars Science Laboratory (MSL) entry vehicle (EV). The method is derived from earlier work for Mars Exploration Rover (MER) and Mars Path Finder (MPF) and the appropriate additions are made in the areas where physics are different from what the prior entry systems would encounter. These additions include the considerations for the high angle of attack of MSL EV, ablation of the heatshield during entry, turbulent boundary layer, and other aspects relevant to the flight performance of MSL. Details of the work, the supporting data and conclusions of the investigation are presented.

Sandia National Laboratories

Data.gov (United States)

Federal Laboratory Consortium — For more than 60 years, Sandia has delivered essential science and technology to resolve the nation's most challenging security issues.Sandia National Laboratories...

Hemophilia A. Considerations for dental management of pediatric patients.

Directory of Open Access Journals (Sweden)

Sonia López-Villareal

2016-12-01

Full Text Available It comes to consulting the Faculty of Dentistry at the University of Nuevo León pediatric male patient of 9 years 10 months, who was admitted with a presumptive diagnosis of hemophilia due to a subsequent persistent bleeding to treatment with steel crowns made in an earlier appointment. Interconsultation is performed with the hematologist who by laboratory examinations notice decreased coagulation factor VIII confirming the diagnosis of hemophilia A. It plans and conducts comprehensive treatment dental team with the hematologist who said that patients in hospitals with the replacement of missing clotting factor is prepared by cryo precipitates or with concentrated factor VIII intravenously before and after his dental intervention. The aim of the article is to highlight that hemophilia can be a disease detected during dental surgery in some patients and for it to be successfully treated with multidisciplinary management protocol is required between hematologists and dentists.

Radiographic Assessment of Dental Maturation in Children With Dental Agenesis.

Science.gov (United States)

Medina, Aida Carolina; Pozo, Rodrigo Del; de Cedres, Lucila Blanco

Dental agenesis is the most common developmental anomaly in humans, frequently associated with disorders in dental development and maturation. The purpose of this study is to determine radiographic variations in dental maturation in a group of Venezuelan children with dental agenesis. 1,188 panoramic radiographs, from healthy patients ages 5 to 12 years old were studied for agenesis of permanent teeth. Dental maturation was assessed by relative eruption and dental age according to Nolla, comparing children affected with dental agenesis to a stratified control group selected from the same population, excluding children with premature loss of primary teeth in the left quadrants and unclear radiographs. Descriptive analysis, and differences between means and medians (Student t test, Kruskall-Wallis p=0.05) were performed. Medians for Nolla stages were similar between groups, with delay in tooth formation in the agenesis group for second molars (p<0.05) and maxillary lateral incisors and second premolars. Dental age was significantly underestimated for both groups, -0.89 (±0.78) for the control group and -1.20 (±0.95) for the study group. Tooth eruption was similar between groups. Dental age was significantly delayed in Venezuelan children with dental agenesis, with variable significance for tooth formation of studied teeth.